The Bookmark Procedure for Setting Cut-Scores and Finalizing Performance Standards: Strengths and Weaknesses

ERIC Educational Resources Information Center

Lin, Jie

2006-01-01

The Bookmark standard-setting procedure was developed to address the perceived problems with the most popular method for setting cut-scores: the Angoff procedure (Angoff, 1971). The purposes of this article are to review the Bookmark procedure and evaluate it in terms of Berk's (1986) criteria for evaluating cut-score setting methods. The…

Designing Flightdeck Procedures

NASA Technical Reports Server (NTRS)

Barshi, Immanuel; Mauro, Robert; Degani, Asaf; Loukopoulou, Loukia

2016-01-01

The primary goal of this document is to provide guidance on how to design, implement, and evaluate flight deck procedures. It provides a process for developing procedures that meet clear and specific requirements. This document provides a brief overview of: 1) the requirements for procedures, 2) a process for the design of procedures, and 3) a process for the design of checklists. The brief overview is followed by amplified procedures that follow the above steps and provide details for the proper design, implementation and evaluation of good flight deck procedures and checklists.

The use of high-fidelity human patient simulation as an evaluative tool in the development of clinical research protocols and procedures.

PubMed

Wright, Melanie C; Taekman, Jeffrey M; Barber, Linda; Hobbs, Gene; Newman, Mark F; Stafford-Smith, Mark

2005-12-01

Errors in clinical research can be costly, in terms of patient safety, data integrity, and data collection. Data inaccuracy in early subjects of a clinical study may be associated with problems in the design of the protocol, procedures, and data collection tools. High-fidelity patient simulation centers provide an ideal environment to apply human-centered design to clinical trial development. A draft of a complex clinical protocol was designed, evaluated and modified using a high-fidelity human patient simulator in the Duke University Human Simulation and Patient Safety Center. The process included walk-throughs, detailed modifications of the protocol and development of procedural aids. Training of monitors and coordinators provided an opportunity for observation of performance that was used to identify further improvements to the protocol. Evaluative steps were used to design the research protocol and procedures. Iterative modifications were made to the protocol and data collection tools. The success in use of human simulation in the preparation of a complex clinical drug trial suggests the benefits of human patient simulation extend beyond training and medical equipment evaluation. Human patient simulation can provide a context for informal expert evaluation of clinical protocol design and for formal "rehearsal" to evaluate the efficacy of procedures and support tools.

Evaluating Community College Personnel: A Research Report.

ERIC Educational Resources Information Center

Deegan, William L.; And Others

A statewide survey was conducted of local evaluation policies, procedures, and problems of implementing evaluation programs on the campuses of California community colleges. The following areas were studied: (1) the process of development of the evaluation program; (2) procedures utilized in the first year of implementing Senate Bill 696…

Development of an in vitro method for the evaluation of candidate repellents against Leptotrombidium (Acari: Trombiculidae) chiggers.

PubMed

Lerdthusnee, Kriangkrai; Khlaimanee, Nittaya; Monkanna, Taweesak; Mungviriya, Siriporn; Leepitakrat, Warisa; Debboun, Mustapha; Coleman, Russell E

2003-01-01

We developed a rapid and economical in vitro procedure with which to evaluate the efficacy of candidate repellents against chiggers. The procedure requires only 5 min and a small number of chiggers to obtain a valid estimate of the median effective dose. We used this procedure to evaluate the repellent activity of 11 compounds against the chigger, Leptotrombidium imphalum Vercammen-Grandjean and Langston. Median effective doses were determined for 10 of the 11 compounds. DM-165-2 (N,N-diethyl-3-flurobenzamide) was the only compound that was significantly more effective than deet.

Army Blast Claims Evaluation Procedures

DTIC Science & Technology

1994-03-01

ARMY RESEARCH LABORATORY ARL-MR-131 Army Blast Claims Evaluation Procedures William P. Wright APPROVED FOR PUBUC RELEASE; DISTRIBtmON IS...NUMBERS Anny Blast Claims Evaluation Procedures 4G061-304-U2 6. AUTHOR(S) William P. Wrisht 1. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8...of the technical review process which bas been instituted to develop an opinion as to Army responsibility. 14. SUBJECT TERMS blast effects. muzzle

A Baseline Evaluation Procedure for Federal Standards on the Prevention, Identification and Treatment of Child Abuse and Neglect. Volume I: Development, Field Testing and Recommended Procedure. Volume II: State of Washington Field Test.

ERIC Educational Resources Information Center

Seaberg, James R.; And Others

The National Center on Child Abuse and Neglect funded a project to develop and field-test an evaluation procedure that could be used by interested states or communities to determine the extent of congruity between (1) their provisions for responding to the problems of child abuse and neglect, and (2) provisions prescribed in the Federal Standards…

Development of an improved overlay design procedure for Oregon : volume II, evaluation of procedure.

DOT National Transportation Integrated Search

1987-12-01

This report is the second in a three-volume series dealing with the development of an improved overlay design procedure for Oregon. This report presents the results of the second-year findings. Data from five projects were collected and analyzed usin...

People's Need for Additional Job Training: Development and Evaluation of an Assessment Procedure.

ERIC Educational Resources Information Center

Copa, George H.; Maurice, Clyde F.

A procedure was developed and evaluated for assessing the self-perceived educational needs of people as one input to the process of planning, approving, and implementing relevant educational programs. The method of data collection involved selecting samples of people by randomly selecting households in a given geographic area, and then contacting…

A procedure for evaluating environmental impact

USGS Publications Warehouse

Leopold, Luna Bergere; Clarke, Frank Eldridge; Hanshaw, Bruce B.; Balsley, James R.

1971-01-01

The procedure does not limit the development of detail in any specific aspect of the environment; a separate expanded matrix for any environmental aspect can easily be developed within the framework provided.

A Self-Assessment Procedure for Use in Evaluation Training

ERIC Educational Resources Information Center

Stufflebeam, Daniel L.; Wingate, Lori A.

2005-01-01

This article describes the Self-Assessment of Program Evaluation Expertise instrument and procedure developed to help participants assess their learning gains in a 3-week evaluation institute. Participants completed the instrument in a pre- and posttest format. To reduce both the threat of embarrassment from individual results and the temptation…

Powertrain Test Procedure Development for EPA GHG Certification of Medium- and Heavy-Duty Engines and Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chambon, Paul H.; Deter, Dean D.

2016-07-01

xiii ABSTRACT The goal of this project is to develop and evaluate powertrain test procedures that can accurately simulate real-world operating conditions, and to determine greenhouse gas (GHG) emissions of advanced medium- and heavy-duty engine and vehicle technologies. ORNL used their Vehicle System Integration Laboratory to evaluate test procedures on a stand-alone engine as well as two powertrains. Those components where subjected to various drive cycles and vehicle conditions to evaluate the validity of the results over a broad range of test conditions. Overall, more than 1000 tests were performed. The data are compiled and analyzed in this report.

A Guidebook for Evaluating Programs for the Gifted in Virginia School Divisions. A Cooperative Project.

ERIC Educational Resources Information Center

Pulaski County Schools, VA.

This guidebook aims to provide clear, non-technical descriptions of procedures for evaluating the effectiveness of local gifted education programs in Virginia. The procedures were developed with both external and internal evaluations in mind. The evaluation process is described in four phases: planning, collecting the data, interpreting the data…

A Procedure for Measuring the Effectiveness of Training and Development Programs.

ERIC Educational Resources Information Center

Helliwell, Tanis

1978-01-01

The article presents an outline of the methodology used in a study designed to evaluate the effectiveness of staff development courses for Ontario's Civil Service Commission. The procedure included a literature search, instructor interviews, and questionnaire development. (MF)

Estimating Commercial Truck VMT of Interstate Motor Carriers: Data Evaluation

DOT National Transportation Integrated Search

1989-11-01

The objectives of this study were to document and evaluate existing data sources and procedures that estimate the VMT (vehicle miles traveled) of commercial vehicles operating in interstate commerce; to recommend and develop the best procedures that ...

Procedures for evaluating corrosion-inhibiting admixtures for structural concrete

DOT National Transportation Integrated Search

2000-06-01

The objectives of this research were to (1) develop procedures for evaluating and qualifying corrosion-inhibiting admixtures (CIAs) and (2) recommend performance criteria for their acceptance. Phase I work included a literature review of CIAs, the re...

Standard Evaluation Procedures (SEPs) and Data Entry Spreadsheet Templates (DESTs) for Endocrine Disruptor Screening Program (EDSP) Tier 1 Assays

EPA Pesticide Factsheets

This page provides information and access to Standard Evaluation Procedures (SEPs) and Data Entry Spreadsheet Templates (DESTs) developed by EPA's Office of Chemical Safety and Pollution Prevention (OCSPP).

Trackless tack coat materials : a laboratory evaluation performance acceptance.

DOT National Transportation Integrated Search

2012-06-01

The purpose of this study was to develop, demonstrate, and document laboratory procedures that could be used by the : Virginia Department of Transportation (VDOT) to evaluate non-tracking tack coat materials. The procedures would be used to : qualify...

Research Reports. Seven Reports of the Project to Develop Evaluative Criteria and Procedures for the Accreditation of Nontraditional Education. Volume 2.

ERIC Educational Resources Information Center

Andersen, Kay J.; And Others

Seven research reports of the Project to Develop Evaluative Criteria and Procedures for the Accreditation of Nontraditional Education are presented. Contents are as follows: "Nontraditional Certificate Programs," by John Harris and Philip N. McCullough; "Salient Points for 'A Study of the Acceptability and Negotiability of External Degrees,'" by…

Evaluating the Effectiveness of the Stimulus Pairing Observation Procedure and Multiple Exemplar Instruction on Tact and Listener Responses in Children with Autism

ERIC Educational Resources Information Center

Byrne, Brittany L.; Rehfeldt, Ruth Anne; Aguirre, Angelica A.

2014-01-01

The stimulus pairing observation procedure (SPOP) combined with multiple exemplar instruction (MEI) has been shown to be effective with typically developing preschoolers in establishing the joint stimulus control required for the development of naming. The purpose of the current investigation was to evaluate the effectiveness and efficiency of the…

Improvement of screening methods for silicon planar semiconductor devices

NASA Technical Reports Server (NTRS)

Berger, W. M.

1972-01-01

The results of the program for the development of a more sensitive method for selecting silicon planar semiconductor devices for long life applications are reported. The manufacturing technologies (MOS and Bipolar) are discussed along with the screening procedures developed as a result of the tests and evaluations, and the effectiveness of the MOS and Bilayer screening procedures are evaluated.

Development of RAD-Score: A Tool to Assess the Procedural Competence of Diagnostic Radiology Residents.

PubMed

Isupov, Inga; McInnes, Matthew D F; Hamstra, Stan J; Doherty, Geoffrey; Gupta, Ashish; Peddle, Susan; Jibri, Zaid; Rakhra, Kawan; Hibbert, Rebecca M

2017-04-01

The purpose of this study is to develop a tool to assess the procedural competence of radiology trainees, with sources of evidence gathered from five categories to support the construct validity of tool: content, response process, internal structure, relations to other variables, and consequences. A pilot form for assessing procedural competence among radiology residents, known as the RAD-Score tool, was developed by evaluating published literature and using a modified Delphi procedure involving a group of local content experts. The pilot version of the tool was tested by seven radiology department faculty members who evaluated procedures performed by 25 residents at one institution between October 2014 and June 2015. Residents were evaluated while performing multiple procedures in both clinical and simulation settings. The main outcome measure was the percentage of residents who were considered ready to perform procedures independently, with testing conducted to determine differences between levels of training. A total of 105 forms (for 52 procedures performed in a clinical setting and 53 procedures performed in a simulation setting) were collected for a variety of procedures (eight vascular or interventional, 42 body, 12 musculoskeletal, 23 chest, and 20 breast procedures). A statistically significant difference was noted in the percentage of trainees who were rated as being ready to perform a procedure independently (in postgraduate year [PGY] 2, 12% of residents; in PGY3, 61%; in PGY4, 85%; and in PGY5, 88%; p < 0.05); this difference persisted in the clinical and simulation settings. User feedback and psychometric analysis were used to create a final version of the form. This prospective study describes the successful development of a tool for assessing the procedural competence of radiology trainees with high levels of construct validity in multiple domains. Implementation of the tool in the radiology residency curriculum is planned and can play an instrumental role in the transition to competency-based radiology training.

Refractory Metal Heat Pipe Life Test - Test Plan and Standard Operating Procedures

NASA Technical Reports Server (NTRS)

Martin, J. J.; Reid, R. S.

2010-01-01

Refractory metal heat pipes developed during this project shall be subjected to various operating conditions to evaluate life-limiting corrosion factors. To accomplish this objective, various parameters shall be investigated, including the effect of temperature and mass fluence on long-term corrosion rate. The test series will begin with a performance test of one module to evaluate its performance and to establish the temperature and power settings for the remaining modules. The performance test will be followed by round-the-clock testing of 16 heat pipes. All heat pipes shall be nondestructively inspected at 6-month intervals. At longer intervals, specific modules will be destructively evaluated. Both the nondestructive and destructive evaluations shall be coordinated with Los Alamos National Laboratory. During the processing, setup, and testing of the heat pipes, standard operating procedures shall be developed. Initial procedures are listed here and, as hardware is developed, will be updated, incorporating findings and lessons learned.

Evaluation of procedures for quality assurance specifications

DOT National Transportation Integrated Search

2004-10-01

The objective of this project was to develop a comprehensive quality assurance (QA) manual, supported by scientific evidence and statistical theory, which provides step-by-step procedures and instructions for developing effective and efficient QA spe...

Field evaluation of flight deck procedures for flying CTAS descents

DOT National Transportation Integrated Search

1997-01-01

Flight deck descent procedures were developed for a field evaluation of the CTAS Descent Advisor conducted in the fall of 1995. During this study, CTAS descent clearances were issued to 185 commercial flights at Denver International Airport. Data col...

Development of techniques for producing static strata maps and development of photointerpretation methods based on multitemporal LANDSAT data

NASA Technical Reports Server (NTRS)

Colwell, R. N. (Principal Investigator); Hay, C. M.; Thomas, R. W.; Benson, A. S.

1976-01-01

The progress of research conducted in support of the Large Area Crop Inventory Experiment (LACIE) is documented. Specific tasks include (1) evaluation of the static stratification procedure and modification of that procedure if warranted, and (2) the development of alternative photointerpretative techniques to the present LACIE procedures for the identification and selection of training fields (areas).

Development of techniques for producing static strata maps and development of photointerpretive methods based on multitemporal LANDSAT data

NASA Technical Reports Server (NTRS)

Colwell, R. N. (Principal Investigator); Hay, C. M.; Thomas, R. W.; Benson, A. S.

1977-01-01

Progress in the evaluation of the static stratification procedure and the development of alternative photointerpretive techniques to the present LACIE procedure for the identification of training fields is reported. Statistically significant signature controlling variables were defined for use in refining the stratification procedure. A subset of the 1973-74 Kansas LACIE segments for wheat was analyzed.

ILLINOIS VOCATIONAL EDUCATION OCCUPATIONAL RESEARCH AND DEVELOPMENT COORDINATING UNIT FINAL REPORT.

ERIC Educational Resources Information Center

BURGENER, V.E.

AN OCCUPATIONAL RESEARCH AND DEVELOPMENT UNIT WAS CREATED TO PROVIDE ASSISTANCE IN A STATEWIDE PROGRAM OF VOCATIONAL RESEARCH TO DEVELOP RESEARCH PERSONNEL, TO EVALUATE EXPERIMENTAL CURRICULUM AND INSTRUCTIONAL PROCEDURES, TO DEVELOP AN OVERVIEW OF SURVEY PROCEDURES RELATED TO OCCUPATIONAL OPPORTUNITIES AND TRAINING NEEDS, TO REFINE THE OPERATING…

Development of a systems theoretical procedure for evaluation of the work organization of the cockpit crew of a civil transport airplane

NASA Technical Reports Server (NTRS)

Fricke, M.; Vees, C.

1983-01-01

To achieve optimum design for the man machine interface with aircraft, a description of the interaction and work organization of the cockpit crew is needed. The development of system procedure to evaluate the work organization of pilots while structuring the work process is examined. Statistical data are needed to simulate sequences of pilot actions on the computer. Investigations of computer simulation and applicability for evaluation of crew concepts are discussed.

23 CFR 630.1008 - State-level processes and procedures.

Code of Federal Regulations, 2011 CFR

2011-04-01

..., data and information resources, training, and periodic evaluation enable a systematic approach for... management procedures. States should develop and implement systematic procedures to assess work zone impacts... practices and State processes and procedures. (e) Process review. In order to assess the effectiveness of...

Cue Reactivity in Young Marijuana Smokers

PubMed Central

Gray, Kevin M.; LaRowe, Steven D.; Upadhyaya, Himanshu P.

2008-01-01

Objective To develop and evaluate the feasibility of a cue reactivity paradigm for young marijuana smokers. Method A laboratory procedure was developed involving neutral- and marijuana-related imagery, video, and in vivo cues. Fifteen adolescents and young adults with cannabis use disorders completed the procedure. Continuous Skin Conductance (SC) and Heart Rate (HR) were measured throughout the procedure. Participants completed questionnaires regarding marijuana craving before, during and after cue presentations. Results Higher levels of craving and SC were observed during marijuana cue presentations. Conclusions The procedure appears to elicit cue reactivity among adolescents and young adults with cannabis use disorders and should be further evaluated and refined with a larger sample. Implications for future studies are discussed. PMID:19071985

Models and Procedures for Improving the Planning, Management, and Evaluation of Cooperative Education Programs. Final Report. Volume I.

ERIC Educational Resources Information Center

Blaschke, Charles L.; Steiger, JoAnn

This report of a project to design a set of training guidelines for planning, managing, and evaluating cooperative education programs describes briefly the procedures used in developing the guidelines and model; discusses the various components of the planning, management, and evaluation process; and presents guidelines and criteria for designing…

To Develop and Test Improved Procedures for the Development and Distribution of Quality Individualized Mediated Instructional Materials in Vocational Education. Final Report.

ERIC Educational Resources Information Center

State Fair Community Coll., Sedalia, MO.

Five objectives are reported for a project to develop and test effective procedures for designing, field testing, reproducing, and disseminating individualized mediated instructional materials: (1) improvement of teacher input, (2) development of individualized instruction modules, (3) development of methodology for evaluating the effectiveness of…

Development and Initial Evaluation of an Acceptance Testing Procedure for Air Supply and Distribution Systems in New Army Facilities

DTIC Science & Technology

1988-09-01

Unfortunately, although current construction practices can produce functional HVAC systems that provide adequate heating and cooling , they do not guarantee...developed by interviewing heating, ventilating, and air-conditioning ( HVAC ) profes- sionals, reviewing technical literature, and consolidating these...for recording this information. A glossary of possibly unfamiliar HVAC terms is included. An informal evaluation of the procedure showed that

The Evaluation of Published Indexes, and Abstract Journals:, Criteria and Possible Procedures

PubMed Central

Lancaster, F. W.

1971-01-01

This paper describes possible criteria by which the effectiveness of a published index may be evaluated and suggest procedures that might be used to conduct an evaluation of a published index. The procedures were developed for the National Library of Medicine and relate specifically to the recurring bibliographies produced by MEDLARS in various specialized areas of biomedicine. The methods described should, however, be applicable to other printed indexes and abstract journals. Factors affecting the performance of a published index are also discussed and some research projects relevant to the evaluation of published indexes are reviewed. PMID:5146770

Simulation model calibration and validation : phase II : development of implementation handbook and short course.

DOT National Transportation Integrated Search

2006-01-01

A previous study developed a procedure for microscopic simulation model calibration and validation and evaluated the procedure via two relatively simple case studies using three microscopic simulation models. Results showed that default parameters we...

An approach for assessing software prototypes

NASA Technical Reports Server (NTRS)

Church, V. E.; Card, D. N.; Agresti, W. W.; Jordan, Q. L.

1986-01-01

A procedure for evaluating a software prototype is presented. The need to assess the prototype itself arises from the use of prototyping to demonstrate the feasibility of a design or development stategy. The assessment procedure can also be of use in deciding whether to evolve a prototype into a complete system. The procedure consists of identifying evaluations criteria, defining alterative design approaches, and ranking the alternatives according to the criteria.

Operational flight evaluation of the two-segment approach for use in airline service

NASA Technical Reports Server (NTRS)

Schwind, G. K.; Morrison, J. A.; Nylen, W. E.; Anderson, E. B.

1975-01-01

United Airlines has developed and evaluated a two-segment noise abatement approach procedure for use on Boeing 727 aircraft in air carrier service. In a flight simulator, the two-segment approach was studied in detail and a profile and procedures were developed. Equipment adaptable to contemporary avionics and navigation systems was designed and manufactured by Collins Radio Company and was installed and evaluated in B-727-200 aircraft. The equipment, profile, and procedures were evaluated out of revenue service by pilots representing government agencies, airlines, airframe manufacturers, and professional pilot associations. A system was then placed into scheduled airline service for six months during which 555 two-segment approaches were flown at three airports by 55 airline pilots. The system was determined to be safe, easy to fly, and compatible with the airline operational environment.

Evaluating Content Alignment in Computerized Adaptive Testing

ERIC Educational Resources Information Center

Wise, Steven L.; Kingsbury, G. Gage; Webb, Norman L.

2015-01-01

The alignment between a test and the content domain it measures represents key evidence for the validation of test score inferences. Although procedures have been developed for evaluating the content alignment of linear tests, these procedures are not readily applicable to computerized adaptive tests (CATs), which require large item pools and do…

23 CFR 669.21 - Procedure for evaluating state compliance.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Procedure for evaluating state compliance. 669.21 Section 669.21 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND... FHWA. The State may develop a software system to maintain copies or images of this proof-of-payment...

23 CFR 669.21 - Procedure for evaluating state compliance.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Procedure for evaluating state compliance. 669.21 Section 669.21 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND... FHWA. The State may develop a software system to maintain copies or images of this proof-of-payment...

23 CFR 669.21 - Procedure for evaluating state compliance.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Procedure for evaluating state compliance. 669.21 Section 669.21 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND... FHWA. The State may develop a software system to maintain copies or images of this proof-of-payment...

23 CFR 669.21 - Procedure for evaluating state compliance.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Procedure for evaluating state compliance. 669.21 Section 669.21 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND... FHWA. The State may develop a software system to maintain copies or images of this proof-of-payment...

Towards developing standard operating procedures for pre-clinical testing in the mdx mouse model of Duchenne muscular dystrophy

PubMed Central

Grounds, Miranda D.; Radley, Hannah G.; Lynch, Gordon S.; Nagaraju, Kanneboyina; De Luca, Annamaria

2008-01-01

This review discusses various issues to consider when developing standard operating procedures for pre-clinical studies in the mdx mouse model of Duchenne muscular dystrophy (DMD). The review describes and evaluates a wide range of techniques used to measure parameters of muscle pathology in mdx mice and identifies some basic techniques that might comprise standardised approaches for evaluation. While the central aim is to provide a basis for the development of standardised procedures to evaluate efficacy of a drug or a therapeutic strategy, a further aim is to gain insight into pathophysiological mechanisms in order to identify other therapeutic targets. The desired outcome is to enable easier and more rigorous comparison of pre-clinical data from different laboratories around the world, in order to accelerate identification of the best pre-clinical therapies in the mdx mouse that will fast-track translation into effective clinical treatments for DMD. PMID:18499465

Digital I and C system upgrade integration technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, H. W.; Shih, C.; Wang, J. R.

2012-07-01

This work developed an integration technique for digital I and C system upgrade, the utility can replace the I and C systems step by step systematically by this method. Inst. of Nuclear Energy Research (INER) developed a digital Instrumentation and Control (I and C) replacement integration technique on the basis of requirement of the three existing nuclear power plants (NPPs), which are Chin-Shan (CS) NPP, Kuo-Sheng (KS) NPP, and Maanshan (MS) NPP, in Taiwan, and also developed the related Critical Digital Review (CDR) Procedure. The digital I and C replacement integration technique includes: (I) Establishment of Nuclear Power Plant Digitalmore » Replacement Integration Guideline, (2) Preliminary Investigation on I and C System Digitalization, (3) Evaluation on I and C System Digitalization, and (4) Establishment of I and C System Digitalization Architectures. These works can be a reference for performing I and C system digital replacement integration of the three existing NPPs of Taiwan Power Company (TPC). A CDR is the review for a critical system digital I and C replacement. The major reference of this procedure is EPRI TR- 1011710 (2005) 'Handbook for Evaluating Critical Digital Equipment and Systems' which was published by the Electric Power Research Inst. (EPRI). With this document, INER developed a TPC-specific CDR procedure. Currently, CDR becomes one of the policies for digital I and C replacement in TPC. The contents of this CDR procedure include: Scope, Responsibility, Operation Procedure, Operation Flow Chart, CDR review items. The CDR review items include the comparison of the design change, Software Verification and Validation (SVandV), Failure Mode and Effects Analysis (FMEA), Evaluation of Diversity and Defense-in-depth (D3), Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/Component, Seismic Evaluation, Witness and Inspection, Lessons Learnt from the Digital I and C Failure Events. A solid review can assure the quality of the digital I and C system replacement. (authors)« less

Continuation of advanced crew procedures development techniques

NASA Technical Reports Server (NTRS)

Arbet, J. D.; Benbow, R. L.; Evans, M. E.; Mangiaracina, A. A.; Mcgavern, J. L.; Spangler, M. C.; Tatum, I. C.

1976-01-01

An operational computer program, the Procedures and Performance Program (PPP) which operates in conjunction with the Phase I Shuttle Procedures Simulator to provide a procedures recording and crew/vehicle performance monitoring capability was developed. A technical synopsis of each task resulting in the development of the Procedures and Performance Program is provided. Conclusions and recommendations for action leading to the improvements in production of crew procedures development and crew training support are included. The PPP provides real-time CRT displays and post-run hardcopy output of procedures, difference procedures, performance data, parametric analysis data, and training script/training status data. During post-run, the program is designed to support evaluation through the reconstruction of displays to any point in time. A permanent record of the simulation exercise can be obtained via hardcopy output of the display data and via transfer to the Generalized Documentation Processor (GDP). Reference procedures data may be transferred from the GDP to the PPP. Interface is provided with the all digital trajectory program, the Space Vehicle Dynamics Simulator (SVDS) to support initial procedures timeline development.

Identification and evaluation of software measures

NASA Technical Reports Server (NTRS)

Card, D. N.

1981-01-01

A large scale, systematic procedure for identifying and evaluating measures that meaningfully characterize one or more elements of software development is described. The background of this research, the nature of the data involved, and the steps of the analytic procedure are discussed. An example of the application of this procedure to data from real software development projects is presented. As the term is used here, a measure is a count or numerical rating of the occurrence of some property. Examples of measures include lines of code, number of computer runs, person hours expended, and degree of use of top down design methodology. Measures appeal to the researcher and the manager as a potential means of defining, explaining, and predicting software development qualities, especially productivity and reliability.

Practical Guide for the Selection of Audio Visual Media. General Criteria System and Evaluation Procedure for Educational Media Decisions.

ERIC Educational Resources Information Center

Klepzig, H. J.; Weiss, M.

Designed to aid in making concrete decisions on the acquisition and use of media, the criteria system and evaluation procedure described is a multiphase, objective-based decision making process. This report includes guidelines for setting up goal systems and developing criteria for the evaluation of media based on a goal system; an outline of…

Evaluation of Procedures for Backcalculation of Airfield Pavement Moduli

DTIC Science & Technology

2015-08-01

to develop pavement design and structural evaluation criteria, procedures, and software to ensure that its airfield pavements can support mission...aircraft. As tire pressures and aircraft weights have increased steadily during this time, the design and evaluation software– Pavement -Transportation...the remaining life for the pavement in terms of remaining pavement life (passes-to-failure) or allowable gross aircraft loads and also to design

Development of Tasks and Evaluation of a Prototype Forceps for NOTES

PubMed Central

Addis, Matthew; Aguirre, Milton; Haluck, Randy; Matthew, Abraham; Pauli, Eric; Gopal, Jegan

2012-01-01

Background and Objectives: Few standardized testing procedures exist for instruments intended for Natural Orifice Translumenal Endoscopic Surgery. These testing procedures are critical for evaluating surgical skills and surgical instruments to ensure sufficient quality. This need is widely recognized by endoscopic surgeons as a major hurdle for the advancement of Natural Orifice Translumenal Endoscopic Surgery. Methods: Beginning with tasks currently used to evaluate laparoscopic surgeons and instruments, new tasks were designed to evaluate endoscopic surgical forceps instruments. Results: Six tasks have been developed from existing tasks, adapted and modified for use with endoscopic instruments, or newly designed to test additional features of endoscopic forceps. The new tasks include the Fuzzy Ball Task, Cup Drop Task, Ring Around Task, Material Pull Task, Simulated Biopsy Task, and the Force Gauge Task. These tasks were then used to evaluate the performance of a new forceps instrument designed at Pennsylvania State University. Conclusions: The need for testing procedures for the advancement of Natural Orifice Translumenal Endoscopic Surgery has been addressed in this work. The developed tasks form a basis for not only testing new forceps instruments, but also for evaluating individual performance of surgical candidates with endoscopic forceps instruments. PMID:22906337

Early detection of disease program: Evaluation of the cellular immune response

NASA Technical Reports Server (NTRS)

Criswell, B. S.; Knight, V.; Martin, R. R.; Kasel, J. A.

1974-01-01

The early cellular responses of specific components of the leukocyte and epithelial cell populations to foreign challenges of both an infectious and noninfectious character were evaluated. Procedures for screening potential flight crews were developed, documented, and tested on a control population. Methods for preparing suitable populations of lymphocytes, polymorphonuclear leukocytes, macrophages, and epithelial cells were first established and evaluated. Epithelial cells from viral infected individuals were screened with a number of anti-viral antisera. This procedure showed the earliest indication of disease as well as providing a specific diagnosis to the physicians. Both macrophages and polymorphonuclear leukocytes were studied from normal individuals, smokers, and patients with viral infections. Newer techniques enabling better definition of lymphocyte subpopulations were then developed, namely the E and EAC rosette procedures for recognition of T (thymus-derived) and B (bone-marrow-derived) lymphocyte subpopulations. Lymphocyte and lymphocyte subpopulation response to multiple mitogens have been evaluated.

A new tool for the evaluation of the analytical procedure: Green Analytical Procedure Index.

PubMed

Płotka-Wasylka, J

2018-05-01

A new means for assessing analytical protocols relating to green analytical chemistry attributes has been developed. The new tool, called GAPI (Green Analytical Procedure Index), evaluates the green character of an entire analytical methodology, from sample collection to final determination, and was created using such tools as the National Environmental Methods Index (NEMI) or Analytical Eco-Scale to provide not only general but also qualitative information. In GAPI, a specific symbol with five pentagrams can be used to evaluate and quantify the environmental impact involved in each step of an analytical methodology, mainly from green through yellow to red depicting low, medium to high impact, respectively. The proposed tool was used to evaluate analytical procedures applied in the determination of biogenic amines in wine samples, and polycyclic aromatic hydrocarbon determination by EPA methods. GAPI tool not only provides an immediately perceptible perspective to the user/reader but also offers exhaustive information on evaluated procedures. Copyright © 2018 Elsevier B.V. All rights reserved.

Development of an ELISA for evaluation of swab recovery efficiencies of bovine serum albumin.

PubMed

Sparding, Nadja; Slotved, Hans-Christian; Nicolaisen, Gert M; Giese, Steen B; Elmlund, Jón; Steenhard, Nina R

2014-01-01

After a potential biological incident the sampling strategy and sample analysis are crucial for the outcome of the investigation and identification. In this study, we have developed a simple sandwich ELISA based on commercial components to quantify BSA (used as a surrogate for ricin) with a detection range of 1.32-80 ng/mL. We used the ELISA to evaluate different protein swabbing procedures (swabbing techniques and after-swabbing treatments) for two swab types: a cotton gauze swab and a flocked nylon swab. The optimal swabbing procedure for each swab type was used to obtain recovery efficiencies from different surface materials. The surface recoveries using the optimal swabbing procedure ranged from 0-60% and were significantly higher from nonporous surfaces compared to porous surfaces. In conclusion, this study presents a swabbing procedure evaluation and a simple BSA ELISA based on commercial components, which are easy to perform in a laboratory with basic facilities. The data indicate that different swabbing procedures were optimal for each of the tested swab types, and the particular swab preference depends on the surface material to be swabbed.

Outcome Evaluation: Student Development Program, Special Studies Division, Cleveland State University.

ERIC Educational Resources Information Center

Pasch, Marvin

Techniques and procedures used to evaluate the outcomes of the student development program, and to use the evaluation results, are presented. Specific evaluation questions are posed that address overall outcomes, not individual student outcomes, and quantitative measures are suggested to accompany the questions. The measures include statistical…

Identifying types of drug intoxication : laboratory evaluation of a subject-examination procedure

DOT National Transportation Integrated Search

1985-05-01

The Los Angeles Police Department (LAPD) has developed a rating procedures for use in detecting drug-impaired drivers. The purpose of the rating procedures is to determine whether the driver is impaired and to identify the responsible drug class (e.g...

Evaluation of Approval Request 47; Call for Release Procedures for Charlotte Douglas International Airport

NASA Technical Reports Server (NTRS)

Stevens, Lindsay; Martin, Lynne; Jobe, Kimberly; Parke, Bonny; Chevalley, Eric; Lee, Hanbong; Verma, Savita; Dulchinos, Victoria

2017-01-01

NASA is collaborating with the Federal Aviation Administration (FAA) and aviation industry partners to develop and demonstrate new concepts and technologies for Integrated Arrival, Departure, and Surface (IADS) traffic management capabilities under the Airspace Technology Demonstration 2 (ATD-2) project. One of the goals of the IADS capabilities in the ATD-2 project is to increase predictability and throughput of airspace operations by improving Traffic Management Initiative (TMI) compliance. This paper focuses on the Approval Request (APREQ) procedures developed for the ATD-2 project between the Air Traffic Control (ATC) Tower at Charlotte Douglas International Airport and Washington Center. In March 2017, NASA conducted a Human-in-the-Loop (HITL) simulation to evaluate the operational procedures and information requirements for the APREQ procedures in the ATD-2 IADS system between ATC Tower and Center. The findings from the HITL are used to compare ATD-2 APREQ procedures with information about current day APREQ procedures.

Evaluation of Approval Request/Call for Release Coordination Procedures for Charlotte Douglas International Airport

NASA Technical Reports Server (NTRS)

Stevens, Lindsay; Martin, Lynne; Jobe, Kimberly; Parke, Bonny; Chevalley, Eric; Lee, Hanbong; Verma, Savita; Dulchinos, Victoria

2017-01-01

NASA is collaborating with the Federal Aviation Administration (FAA) and aviation industry partners to develop and demonstrate new concepts and technologies for Integrated Arrival, Departure, and Surface (IADS) traffic management capabilities under the Airspace Technology Demonstration 2 (ATD-2) project. One of the goals of the IADS capabilities in the ATD-2 project is to increase predictability and throughput of airspace operations by improving Traffic Management Initiative (TMI) compliance. This paper focuses on the Approval Request (APREQ) procedures developed for the ATD-2 project between the Air Traffic Control (ATC) Tower at Charlotte Douglas International Airport and Washington Center. In March 2017, NASA conducted a Human-in-the-Loop (HITL) simulation to evaluate the operational procedures and information requirements for the APREQ procedures in the ATD-2 IADS system between ATC Tower and Center. The findings from the HITL are used to compare ATD-2 APREQ procedures with information about current day APREQ procedures.

Development of techniques for producing static strata maps and development of photointerpretive methods based on multitemporal LANDSAT data

NASA Technical Reports Server (NTRS)

Colwell, R. N. (Principal Investigator)

1977-01-01

The results and progress of work conducted in support of the Large Area Crop Inventory Experiment (LACIE) are documented. Research was conducted for two tasks. These tasks include: (1) evaluation of the UCB static stratification procedure and modification of that procedure if warranted; and (2) the development of alternative photointerpretive techniques to the present LACIE procedure for the identification and selection of training areas for machine-processing of LACIE segments.

Syracuse University's Center for Instructional Development; Its Role, Organization, and Procedures.

ERIC Educational Resources Information Center

Diamond, Robert M.

A brief report on the Syracuse University Center for Instructional Development is presented which describes the Center's organizational structure and operational procedures. The center combines support services for video, audio, graphics and photographic preparation of materials for instructional use; a research and evaluation unit to assess…

76 FR 41297 - Grant Program To Build Tribal Energy Development Capacity

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-13

... develop energy resources on Indian land and properly accounting for resulting energy resource production and revenues. We will use a competitive evaluation process based on criteria stated in the.... Determine what process(es) and/or procedure(s) may be used to eliminate capacity gaps or sustain the...

Recommended Procedures for the Internal Financial Auditing of University Libraries.

ERIC Educational Resources Information Center

Kurth, William H.; Zubatsky, David S.

This study develops a generalized procedure for the internal financial auditing of university libraries. It identifies critical internal control points in library operations, and develops questions to measure and evaluate fiscal operations effectiveness. Auditing data and advice were gathered from a survey of 87 members of the Association of…

Evaluation of contract time estimation and contracting procedures for louisiana department of transportation and development construction projects : final report : volume I.

DOT National Transportation Integrated Search

1995-09-11

The purpose of the research was to provide the Louisiana Department of Transportation and Development (LaDOTD) with a systematic approach to the determination of contract time and to explore innovative contracting procedures that may prove beneficial...

Development of a non-tissue adherent neurosurgical patty and an ex vivo testing system to evaluate adherent characteristics.

PubMed

Kinoshita, Manabu; Taniguchi, Mai; Takagaki, Masatoshi; Seike, Nobuhisa; Hashimoto, Naoya; Yoshimine, Toshiki

2015-05-01

Neurosurgical patties are the most frequently used instruments during neurosurgical procedures, and their high performance is required to ensure safe operations. They must offer cushioning, water-absorbing, water-retaining, and non-tissue adherent characteristics. Here, the authors describe a revised neurosurgical patty that is superior in all respects to the conventional patty available in Japan. Patty characteristics were critically and scientifically evaluated using various in vitro assays. Moreover, a novel ex vivo evaluation system focusing on the adherent characteristics of the neurosurgical patty was developed. The proposed assay could provide benchmark data for comparing different neurosurgical patties, offering neurosurgeons objective data on the performance of patties. The newly developed patty was also evaluated in real neurosurgical settings and showed superb performance during various neurosurgical procedures.

Efficacy Outcome Measures for Procedural Sedation Clinical Trials in Adults: An ACTTION Systematic Review.

PubMed

Williams, Mark R; McKeown, Andrew; Dexter, Franklin; Miner, James R; Sessler, Daniel I; Vargo, John; Turk, Dennis C; Dworkin, Robert H

2016-01-01

Successful procedural sedation represents a spectrum of patient- and clinician-related goals. The absence of a gold-standard measure of the efficacy of procedural sedation has led to a variety of outcomes being used in clinical trials, with the consequent lack of consistency among measures, making comparisons among trials and meta-analyses challenging. We evaluated which existing measures have undergone psychometric analysis in a procedural sedation setting and whether the validity of any of these measures support their use across the range of procedures for which sedation is indicated. Numerous measures were found to have been used in clinical research on procedural sedation across a wide range of procedures. However, reliability and validity have been evaluated for only a limited number of sedation scales, observer-rated pain/discomfort scales, and satisfaction measures in only a few categories of procedures. Typically, studies only examined 1 or 2 aspects of scale validity. The results are likely unique to the specific clinical settings they were tested in. Certain scales, for example, those requiring motor stimulation, are unsuitable to evaluate sedation for procedures where movement is prohibited (e.g., magnetic resonance imaging scans). Further work is required to evaluate existing measures for procedures for which they were not developed. Depending on the outcomes of these efforts, it might ultimately be necessary to consider measures of sedation efficacy to be procedure specific.

Dextroamphetamine: a pharmacologic countermeasure for space motion sickness and orthostatic dysfunction

NASA Technical Reports Server (NTRS)

Snow, L. Dale

1996-01-01

Dextroamphetamine has potential as a pharmacologic agent for the alleviation of two common health effects associated with microgravity. As an adjuvant to Space Motion Sickness (SMS) medication, dextroamphetamine can enhance treatment efficacy by reducing undesirable Central Nervous System (CNS) side effects of SMS medications. Secondly, dextroamphetamine may be useful for the prevention of symptoms of post-mission orthostatic intolerance caused by cardiovascular deconditioning during spaceflight. There is interest in developing an intranasal delivery form of dextroamphetanmine for use as a countermeasure in microgravity conditions. Development of this dosage form will require an analytical detection method with sensitivity in the low ng range (1 to 100 ng/mL). During the 1995 Summer Faculty Fellowship Program, two analytical methods were developed and evaluated for their suitability as quantitative procedures for dextroamphetamine in studies of product stability, bioavailability assessment, and pharmacokinetic evaluation. In developing some of the analytical methods, beta-phenylethylamine, a primary amine structurally similar to dextroamphetamine, was used. The first analytical procedure to be evaluated involved hexane extraction and subsequent fluorescamine labeling of beta-phenylethylamine. The second analytical procedure to be evaluated involved quantitation of dextroamphetamine by an Enzyme-Linked ImmunoSorbent Assay (ELISA).

Technique for implanting radio transmitters subcutaneously in day-old ducklings

USGS Publications Warehouse

Korschgen, C.E.; Kenow, K.P.; Green, W.L.; Samuel, M.D.; Sileo, L.

1996-01-01

We developed and evaluated a surgical procedure for implanting radio transmitters in 1-d-old Canvasback (Aythya valisineria) ducklings. Transmitters (1.5 g) were implanted subcutaneously on the back of ducklings while under a general anesthetic, isoflurane, within a few hours of hatching. Evaluations indicate that the procedure is a reliable method for radio-marking ducklings.

A Method for Developing Standard Patient Education Program.

PubMed

Lura, Carolina Bryne; Hauch, Sophie Misser Pallesgaard; Gøeg, Kirstine Rosenbeck; Pape-Haugaard, Louise

2018-01-01

In Denmark, patients being treated on Haematology Outpatients Departments get instructed to self-manage their blood sample collection from Central Venous Catheter (CVC). However, this is a complex and risky procedure, which can jeopardize patient safety. The aim of the study was to suggest a method for developing standard digital patient education programs for patients in self-administration of blood samples drawn from CVC. The Design Science Research Paradigm was used to develop a digital patient education program, called PAVIOSY, to increase patient safety during execution of the blood sample collection procedure by using videos for teaching as well as procedural support. A step-by-step guide was developed and used as basis for making the videos. Quality assurance through evaluation with a nurse was conducted on both the step-by-step guide and the videos. The quality assurance evaluation of the videos showed; 1) Errors due to the order of the procedure can be determined by reviewing the videos despite that the guide was followed. 2) Videos can be used to identify errors - important for patient safety - in the procedure, which are not identifiable in a written script. To ensure correct clinical content of the educational patient system, health professionals must be engaged early in the development of content and design phase.

Technical Criteria and Procedures for Evaluating the Crashworthiness and Occupant Protection Performance of Alternatively Designed Passenger Rail Equipment for Use in Tier I Service

DOT National Transportation Integrated Search

2011-10-01

Criteria and procedures have been developed for assessing crashworthiness and occupant protection performance of alternatively designed trainsets to be used in Tier I (not exceeding 125 mph) passenger service. These criteria and procedures take advan...

Liquefaction Resistance Based on Shear Wave Velocity

DOT National Transportation Integrated Search

1999-01-01

This report reviews the current simplified procedures for evaluating the liquefaction resistance of granular soil deposits using small-strain shear wave velocity. These procedures were developed from analytical studies, laboratory studies, or very li...

[Proceeding memory in Alzheimer's disease].

PubMed

Arroyo-Anlló, Eva Ma; Chamorro-Sánchez, Jorge; Díaz-Marta, Juan Poveda; Gil, Roger

2013-01-01

Procedural learning can acquire or develop skills through performance and repetition of a task unconsciously or unintentionally. Procedural skills are considered as the cornerstone in the neuropsychological rehabilitation to promote the autonomy of patients with brain damage, as those with Alzheimer's disease. This review presents data about procedural skills in Alzheimer's disease. Over the past three decades, we have found 40 articles studying various procedural skills in the Alzheimer's disease: motor, perceptual-motor, cognitive, perceptual-cognitive and those developed through serial reaction-time paradigm. We analyzed every study evaluating a procedural skill, indicating the used task and preservation or no preservation of procedural learning. Overall, most of the papers published describe conservation of learning procedures or relatively conserved in Alzheimer's disease, which could be used to promote patient autonomy.

[Features of the maintenance of automated developing machines].

PubMed

Koveshnikov, A I

1999-01-01

Based on his long-term own experience the author gives recommendations on the assembly, adjustment, operation, and preventive maintenance of automatic developing machines. Procedures are presented for evaluating the quality of X-ray films and controlling the activity of operating qualities of a developer while machining photographic materials. Troubles and malfunction of equipment and procedures for their elimination are shown to affect the quality of development of films.

Evaluation of the localization auditory screening test in children 6-18 months of age.

PubMed

Tillis, C H; Grimm, W A

1978-01-01

The present paper is a report of a project to develop an automated auditory screening test for infants six to 18 months of age. The first year of the project was devoted to developing equipment and test procedures; the second year was concerned with testing the effectiveness of the equipment and procedures on an actual population of six to 18 month old infants. Two-hundred and fifty infants were screened auditorily as part of a county health department child development clinic. The pass/fail results of the screening test were evaluated in terms of physical and developmental examination following the screening and by means of a case review of the child's previous history. The results indicate that the procedure under investigation can be used to differentiate the normal hearing infant from the infant with possible hearing problems. It is shown by the test environment in which this study was conducted that the procedure reported can be successfully incorporated into a public health program, i.e., child development clinics or EPSDT programs.

Manual for research, development and technology program and project evaluations : final report.

DOT National Transportation Integrated Search

2016-04-01

This manual provides the Federal Railroad Administrations (FRA) Office of Research, Development and Technology (RD&T) a : framework, standards, and procedures for planning, conducting, reporting, and using sound evaluations of RD&Ts projects fo...

Improving the safety and quality of nursing care through standardized operating procedures in Bosnia and Herzegovina.

PubMed

Ausserhofer, Dietmar; Rakic, Severin; Novo, Ahmed; Dropic, Emira; Fisekovic, Eldin; Sredic, Ana; Van Malderen, Greet

2016-06-01

We explored how selected 'positive deviant' healthcare facilities in Bosnia and Herzegovina approach the continuous development, adaptation, implementation, monitoring and evaluation of nursing-related standard operating procedures. Standardized nursing care is internationally recognized as a critical element of safe, high-quality health care; yet very little research has examined one of its key instruments: nursing-related standard operating procedures. Despite variability in Bosnia and Herzegovina's healthcare and nursing care quality, we assumed that some healthcare facilities would have developed effective strategies to elevate nursing quality and safety through the use of standard operating procedures. Guided by the 'positive deviance' approach, we used a multiple-case study design to examine a criterion sample of four facilities (two primary healthcare centres and two hospitals), collecting data via focus groups and individual interviews. In each studied facility, certification/accreditation processes were crucial to the initiation of continuous development, adaptation, implementation, monitoring and evaluation of nursing-related SOPs. In one hospital and one primary healthcare centre, nurses working in advanced roles (i.e. quality coordinators) were responsible for developing and implementing nursing-related standard operating procedures. Across the four studied institutions, we identified a consistent approach to standard operating procedures-related processes. The certification/accreditation process is enabling necessary changes in institutions' organizational cultures, empowering nurses to take on advanced roles in improving the safety and quality of nursing care. Standardizing nursing procedures is key to improve the safety and quality of nursing care. Nursing and Health Policy are needed in Bosnia and Herzegovina to establish a functioning institutional framework, including regulatory bodies, educational systems for developing nurses' capacities or the inclusion of nursing-related standard operating procedures in certification/accreditation standards. © 2016 International Council of Nurses.

Structural Analysis and Design of PCC Shoulders

DOT National Transportation Integrated Search

1982-04-01

A structural evaluation of PCC highway shoulders has been conducted and a comprehensive design procedure for plain jointed concrete shoulders developed. The procedure can be used to provide PCC shoulders either for rehabilitation of existing pavement...

Evaluating innovation. Part 2: Development in neurosurgery.

PubMed

Schnurman, Zane; Kondziolka, Douglas

2016-01-01

OBJECT Patients, practitioners, payers, and regulators are advocating for reform in how medical advances are evaluated. Because surgery does not adhere to a standardized developmental pathway, how the medical community accepts a procedure remains unclear. The authors developed a new model, using publication data and patterns, that quantifies this process. Using this technique, the authors identified common archetypes and influences on neurosurgical progress from idea inception to acceptance. METHODS Seven neurosurgical procedures developed in the past 15-25 years were used as developmental case studies (endovascular coil, deep brain stimulation, vagus nerve stimulation, 1,3-bis(2-chloroethyl)-l-nitrosourea wafer, and 3 radiosurgery procedures), and the literature on each topic was evaluated. A new metric the authors termed "progressive scholarly acceptance" (PSA) was used as an end point for community acceptance. PSA was reached when the number of investigations that refine or improve a procedure eclipsed the total number of reports assessing initial efficacy. Report characteristics, including the number of patients studied, study design, and number of authoring groups from the first report to the point of PSA, were assessed. RESULTS Publication data implicated factors that had an outsized influence on acceptance. First, procedural accessibility to investigators was found to influence the number of reports, number of patients studied, and number of authoring groups contributing. Barriers to accessibility included target disease rarity, regulatory restrictions, and cost. Second, the ease or difficulty in applying a randomized controlled trial had an impact on study design. Based on these 2 factors, 3 developmental archetypes were characterized to generally describe the development of surgery. CONCLUSIONS Common surgical development archetypes can be described based on factors that impact investigative methods, data accumulation, and ultimate acceptance by society. The approach and proposed terminologies in this report could inform future procedural development as well as any attempts to regulate surgical innovation.

A method of automatic control procedures cardiopulmonary resuscitation

NASA Astrophysics Data System (ADS)

Bureev, A. Sh.; Zhdanov, D. S.; Kiseleva, E. Yu.; Kutsov, M. S.; Trifonov, A. Yu.

2015-11-01

The study is to present the results of works on creation of methods of automatic control procedures of cardiopulmonary resuscitation (CPR). A method of automatic control procedure of CPR by evaluating the acoustic data of the dynamics of blood flow in the bifurcation of carotid arteries and the dynamics of air flow in a trachea according to the current guidelines for CPR is presented. Evaluation of the patient is carried out by analyzing the respiratory noise and blood flow in the interspaces between the chest compressions and artificial pulmonary ventilation. The device operation algorithm of automatic control procedures of CPR and its block diagram has been developed.

Chromosomes and plant cell division in space

NASA Technical Reports Server (NTRS)

Krikorian, A. D.

1988-01-01

The objectives were: examination of chromosomal aberrations; development of an experimental system; and engineering design units (EDUs) evaluation. Evaluation criteria are presented. Procedures were developed for shuttle-based investigations which result in the procurement of plant root tips for subsequent cytological examination.

Medical evaluations on the KC-135 1990 flight report summary

NASA Technical Reports Server (NTRS)

Lloyd, Charles W.; Guess, Terrell M.; Whiting, Charles W.; Doarn, Charles R.

1991-01-01

The medical investigations completed on the KC-135 during FY 1990 in support of the development of the Health Maintenance Facility and Medical Operations are discussed. The experiments are comprised of engineering evaluations of medical hardware and medical procedures. The investigating teams are made up of both medical and engineering personnel responsible for the development of medical hardware and medical operations. The hardware evaluated includes dental equipment, a coagulation analyzer, selected pharmaceutical aerosol devices, a prototype air/fluid separator, a prototype packaging and stowage system for medical supplies, a microliter metering system, and a workstation for minor surgical procedures. The results of these engineering evaluations will be used in the design of fleet hardware as well as to identify hardware specific training requirements.

Exploration of Terminal Procedures Enabled by NASA Wake VAS Technologies

NASA Technical Reports Server (NTRS)

Lunsford, Clark R.; Smith, Arthur P., III; Cooper, Wayne W., Jr.; Mundra, Anand D.; Gross, Amy E.; Audenaerd, Laurence F.; Killian, Bruce E.

2004-01-01

The National Aeronautics and Space Administration (NASA) tasked The MITRE Corporation's Center for Advanced Aviation System Development (CAASD) to investigate potential air traffic control (ATC) procedures that could benefit from technology used or developed in NASA's Wake Vortex Advisory System (WakeVAS). The task also required developing an estimate of the potential benefits of the candidate procedures. The main thrust of the investigation was to evaluate opportunities for improved capacity and efficiency in airport arrival and departure operations. Other procedures that would provide safety enhancements were also considered. The purpose of this investigation was to provide input to the WakeVAS program office regarding the most promising areas of development for the program. A two-fold perspective was desired: First, identification of benefits from possible procedures enabled by both incremental components and the mature state of WakeVAS technology; second identification of procedures that could be expected to evolve from the current Federal Aviation Administration (FAA) procedures. The evolution of procedures should provide meaningful increments of benefit and a low risk implementation of the WakeVAS technologies.

Development and validation of a screening procedure to identify speech-language delay in toddlers with cleft palate.

PubMed

Jørgensen, Line Dahl; Willadsen, Elisabeth

2017-01-01

The purpose of this study was to develop and validate a clinically useful speech-language screening procedure for young children with cleft palate ± cleft lip (CP) to identify those in need of speech-language intervention. Twenty-two children with CP were assigned to a +/- need for intervention conditions based on assessment of consonant inventory using a real-time listening procedure in combination with parent-reported expressive vocabulary. These measures allowed evaluation of early speech-language skills found to correlate significantly with later speech-language performance in longitudinal studies of children with CP. The external validity of this screening procedure was evaluated by comparing the +/- need for intervention assignment determined by the screening procedure to experienced speech-language pathologist (SLP)s' clinical judgement of whether or not a child needed early intervention. The results of real-time listening assessment showed good-excellent inter-rater agreement on different consonant inventory measures. Furthermore, there was almost perfect agreement between the children selected for intervention with the screening procedure and the clinical judgement of experienced SLPs indicate that the screening procedure is a valid way of identifying children with CP who need early intervention.

Optimizing ACS NSQIP modeling for evaluation of surgical quality and risk: patient risk adjustment, procedure mix adjustment, shrinkage adjustment, and surgical focus.

PubMed

Cohen, Mark E; Ko, Clifford Y; Bilimoria, Karl Y; Zhou, Lynn; Huffman, Kristopher; Wang, Xue; Liu, Yaoming; Kraemer, Kari; Meng, Xiangju; Merkow, Ryan; Chow, Warren; Matel, Brian; Richards, Karen; Hart, Amy J; Dimick, Justin B; Hall, Bruce L

2013-08-01

The American College of Surgeons National Surgical Quality Improvement Program (ACS NSQIP) collects detailed clinical data from participating hospitals using standardized data definitions, analyzes these data, and provides participating hospitals with reports that permit risk-adjusted comparisons with a surgical quality standard. Since its inception, the ACS NSQIP has worked to refine surgical outcomes measurements and enhance statistical methods to improve the reliability and validity of this hospital profiling. From an original focus on controlling for between-hospital differences in patient risk factors with logistic regression, ACS NSQIP has added a variable to better adjust for the complexity and risk profile of surgical procedures (procedure mix adjustment) and stabilized estimates derived from small samples by using a hierarchical model with shrinkage adjustment. New models have been developed focusing on specific surgical procedures (eg, "Procedure Targeted" models), which provide opportunities to incorporate indication and other procedure-specific variables and outcomes to improve risk adjustment. In addition, comparative benchmark reports given to participating hospitals have been expanded considerably to allow more detailed evaluations of performance. Finally, procedures have been developed to estimate surgical risk for individual patients. This article describes the development of, and justification for, these new statistical methods and reporting strategies in ACS NSQIP. Copyright © 2013 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Advancing Continence in Typically Developing Children: Adapting the Procedures of Foxx and Azrin for Primary Care.

PubMed

Warzak, William J; Forcino, Stacy S; Sanberg, Sela Ann; Gross, Amy C

2016-01-01

To (1) identify and summarize procedures of Foxx and Azrin's classic toilet training protocol that continue to be used in training typically developing children and (2) adapt recent findings with the original Foxx and Azrin procedures to inform practical suggestions for the rapid toilet training of typically developing children in the primary care setting. Literature searches of PsychINFO and MEDLINE databases used the search terms "(toilet* OR potty* AND train*)." Selection criteria were only peer-reviewed experimental articles that evaluated intensive toilet training with typically developing children. Exclusion criteria were (1) nonpeer reviewed research, (2) studies addressing encopresis and/or enuresis, (3) studies excluding typically developing children, and (4) studies evaluating toilet training during infancy. In addition to the study of Foxx and Azrin, only 4 publications met the above criteria. Toilet training procedures from each article were reviewed to determine which toilet training methods were similar to components described by Foxx and Azrin. Common training elements include increasing the frequency of learning opportunities through fluid loading and having differential consequences for being dry versus being wet and for voiding in the toilet versus elsewhere. There is little research on intensive toilet training of typically developing children. Practice sits and positive reinforcement for voids in the toilet are commonplace, consistent with the Foxx and Azrin protocol, whereas positive practice as a corrective procedure for wetting accidents often is omitted. Fluid loading and differential consequences for being dry versus being wet and for voiding in the toilet also are suggested procedures, consistent with the Foxx and Azrin protocol.

Evaluation of Currently Used Dental Management Indicators and Development of New Management and Performance Indicators.

DTIC Science & Technology

1981-07-01

for selected procedures g. Pericdontal Procedures Per Dentist Formula: Number of Perio Procedures Comr’.neted* Nunber of Dentists Assigned *See appendi...02336 - Resin, Complex A-2 Selected Endodontic Procedures for Endo teeth per assigned DDS ratio: 03311 - Anterior, 1 Canal Filled 03312 - Anterior, 2 or...04271 - Free Soft Tissue Graft 04272 - Vestibulo.-lasty 04340 - Perio Scale and Root Planning *Some or these procedures are not end-item entities as are

Holistic Evaluation of Writing Samples for Placement in Post-Secondary English Composition Courses.

ERIC Educational Resources Information Center

Guerrero, Barry J.; Robison, Ruth E.

A study was conducted by the Student Development Center of the University of Hawaii at Hilo to develop a writing placement procedure in a community college setting which would be practical, reliable, and valid. The key to this procedure was an English composition placement device that could help readers rate, holistically, writing samples written…

Cross-national research on contractor evaluation procedures in public works procurement

NASA Astrophysics Data System (ADS)

Kinoshita, Seiya; Sato, Naoyoshi; Matsumoto, Naoya

Contractor evaluation methods in Japan's public works procurement, beginning with construction business licensure, going through biennial preliminary firm rating, up to project-by-project prequalification and comprehensive point rating, were developed during the period when public works were mostly procured through designated competitive bidding. It is essential to focus attention on contractor evaluation methods for introducing different types of procurement procedures which enhance the use of technological capabilities held by private businesses. An overall review of contractor evaluation procedures should be conducted in view of the present situation, where the open competitive bidding has become mainly used in combination with comprehensive evaluation, as well as to allow for further diversification of procurement methods. In Western countries, improvements have been made for the past several years in contractor evaluation procedures with more emphasis on "Value for Money." Advanced efforts made by these countries will be useful as a reference for overhauling Japan's contractor evaluation system. This study conducts a comparative review of contractor evaluation procedures for public procurement in Western countries such as the United States, the United Kingdom and France by identifying similarities and differences between those of Japan and the above mentioned countries. This reveals that a contractor's technical or professional ability is looked at separately from its economic and financial standing in those countries studied, and there is no case like Japan in which those two factors are integrated into one for evaluation.

Pre-Speech Assessment Scale: A Rating Scale for the Measurement of Pre-Speech Behaviors from Birth through Two Years. Revised Edition.

ERIC Educational Resources Information Center

Morris, Suzanne Evans

The manual contains the Pre-Speech Assessment Scale (PSAS) intended for use with cerebral palsied and other handicapped children to evaluate behaviors at the birth through 2-year age level. Introductory information covers the development of the PSAS, concepts underlying the PSAS, evaluation procedures, scoring the PSAS, and graphing procedures.…

The Out of Service Guest Pilot Evaluation of the Two-segment Noise Abatement Approach in the Boeing B727-200

NASA Technical Reports Server (NTRS)

Nylen, W. E.

1974-01-01

Guest pilot evaluation results of an approach profile modification for reducing ground level noise under the approach of jet aircraft runways are reported. Evaluation results were used to develop a two segmented landing approach procedure and equipment necessary to obtain pilot, airline, and FAA acceptance of the two segmented flight as a routine way of operating aircraft on approach and landing. Data are given on pilot workload and acceptance of the procedure.

An Examination of Two Procedures for Identifying Consequential Item Parameter Drift

ERIC Educational Resources Information Center

Wells, Craig S.; Hambleton, Ronald K.; Kirkpatrick, Robert; Meng, Yu

2014-01-01

The purpose of the present study was to develop and evaluate two procedures flagging consequential item parameter drift (IPD) in an operational testing program. The first procedure was based on flagging items that exhibit a meaningful magnitude of IPD using a critical value that was defined to represent barely tolerable IPD. The second procedure…

Iterating between Lessons on Concepts and Procedures Can Improve Mathematics Knowledge

ERIC Educational Resources Information Center

Rittle-Johnson, Bethany; Koedinger, Kenneth

2009-01-01

Background: Knowledge of concepts and procedures seems to develop in an iterative fashion, with increases in one type of knowledge leading to increases in the other type of knowledge. This suggests that iterating between lessons on concepts and procedures may improve learning. Aims: The purpose of the current study was to evaluate the…

The vehicle design evaluation program - A computer-aided design procedure for transport aircraft

NASA Technical Reports Server (NTRS)

Oman, B. H.; Kruse, G. S.; Schrader, O. E.

1977-01-01

The vehicle design evaluation program is described. This program is a computer-aided design procedure that provides a vehicle synthesis capability for vehicle sizing, external load analysis, structural analysis, and cost evaluation. The vehicle sizing subprogram provides geometry, weight, and balance data for aircraft using JP, hydrogen, or methane fuels. The structural synthesis subprogram uses a multistation analysis for aerodynamic surfaces and fuselages to develop theoretical weights and geometric dimensions. The parts definition subprogram uses the geometric data from the structural analysis and develops the predicted fabrication dimensions, parts material raw stock buy requirements, and predicted actual weights. The cost analysis subprogram uses detail part data in conjunction with standard hours, realization factors, labor rates, and material data to develop the manufacturing costs. The program is used to evaluate overall design effects on subsonic commercial type aircraft due to parameter variations.

Bioaccumulation of toxic substances associated with dredging and dredged material disposal: a literature review

USGS Publications Warehouse

Seelye, James G.; Mac, Michael J.

1984-01-01

A literature review of sediment bioassessment was conducted as the first step in the development of a more standardized and ecologically sound test procedure for evaluating sediment quality. Based on the review, the authors concluded that 1) a standardized laboratory bioassessment test should consist of flowthrough exposure of at least 10 days duration using more than one aquatic organism including at least an infaunal benthic invertebrate and a fish species. 2) Before adoption of a laboratory sediment bioassessment procedure, the laboratory results should be evaluated by comparison with field conditions. 3) Most current sediment bioassessment regulatory tests measure acute toxicity or bioaccumulation. Development of tests to evaluate chronic, sublethal effects is needed.

Specific test and evaluation plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hays, W.H.

1998-03-20

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made to the 241-AX-B Valve Pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system`s performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP). Testing includes Validations and Verifications (e.g., Commercial Grade Item Dedication activities), Factory Acceptance Tests (FATs), installation tests and inspections, Construction Acceptance Tests (CATs), Acceptance Test Procedures (ATPs), Pre-Operational Test Procedures (POTPs), andmore » Operational Test Procedures (OTPs). It should be noted that POTPs are not required for testing of the transfer line addition. The STEP will be utilized in conjunction with the TEP for verification and validation.« less

Evaluation Theory, Models, and Applications

ERIC Educational Resources Information Center

Stufflebeam, Daniel L.; Shinkfield, Anthony J.

2007-01-01

"Evaluation Theory, Models, and Applications" is designed for evaluators and students who need to develop a commanding knowledge of the evaluation field: its history, theory and standards, models and approaches, procedures, and inclusion of personnel as well as program evaluation. This important book shows how to choose from a growing…

Utility of preclinical drug versus food choice procedures to evaluate candidate medications for methamphetamine use disorder.

PubMed

Banks, Matthew L

2017-04-01

Substance use disorders are diagnosed as a manifestation of inappropriate behavioral allocation toward abused drugs and away from other behaviors maintained by more adaptive nondrug reinforcers (e.g., money and social relationships). Substance use disorder treatment goals include not only decreasing drug-maintained behavior but also promoting behavioral reallocation toward these socially adaptive alternative reinforcers. Preclinical drug self-administration procedures that offer concurrent access to both drug and nondrug reinforcers provide a translationally relevant dependent measure of behavioral allocation that may be useful for candidate medication evaluation. In contrast to other abused drugs, such as heroin or cocaine, preclinical methamphetamine versus food choice procedures have been a more recent development. We hypothesize that preclinical to clinical translatability would be improved by the evaluation of repeated pharmacological treatment effects on methamphetamine self-administration under a methamphetamine versus food choice procedure. In support of this hypothesis, a literature review suggests strong concordance between preclinical pharmacological treatment effects on methamphetamine versus food choice in nonhuman primates and clinical medication treatment effects on methamphetamine self-administration in human laboratory studies or methamphetamine abuse metrics in clinical trials. In conclusion, this literature suggests preclinical methamphetamine versus food choice procedures may be useful in developing innovative pharmacotherapies for methamphetamine use disorder. © 2016 New York Academy of Sciences.

Utility of preclinical drug versus food choice procedures to evaluate candidate medications for methamphetamine use disorder

PubMed Central

Banks, Matthew L.

2016-01-01

Substance use disorders are diagnosed as a manifestation of inappropriate behavioral allocation towards abused drugs and away from other behaviors maintained by more adaptive nondrug reinforcers (e.g., work and social relationships). Substance use disorder treatment goals include not only decreasing drug-maintained behavior but also promoting behavioral reallocation toward these socially adaptive alternative reinforcers. Preclinical drug self-administration procedures that offer concurrent access to both drug and nondrug reinforcers provide a translationally relevant dependent measure of behavioral allocation that may be useful for candidate medication evaluation. In contrast to other abused drugs, such as heroin or cocaine, preclinical methamphetamine versus food choice procedures have been a more recent development. We hypothesize that preclinical to clinical translatability would be improved by the evaluation of repeated pharmacological treatment effects on methamphetamine self-administration under a methamphetamine versus food choice procedure. In support of this hypothesis, a literature review suggests strong concordance between preclinical pharmacological treatment effects on methamphetamine versus food choice in nonhuman primates and clinical medication treatment effects on methamphetamine self-administration in human laboratory studies or methamphetamine abuse metrics in clinical trials. In conclusion, this literature suggests preclinical methamphetamine versus food choice procedures may be useful in developing innovative pharmacotherapies for methamphetamine use disorder. PMID:27936284

Proceduralism and its role in economic evaluation and priority setting in health.

PubMed

Jan, Stephen

2014-05-01

This paper provides a critical overview of Gavin Mooney's proceduralist approach to economic evaluation and priority setting in health. Proceduralism is the notion that the social value attached to alternative courses of action should be determined not only by outcomes, but also processes. Mooney's brand of proceduralism was unique and couched within a broader critique of 'neo-liberal' economics. It operated on a number of levels. At the micro level of the individual program, he pioneered the notion that 'process utility' could be valued and measured within economic evaluation. At a macro level, he developed a framework in which the social objective of equity was defined by procedural justice in which communitarian values were used as the basis for judging how resources should be allocated across the health system. Finally, he applied the notion of procedural justice to further our understanding of the political economy of resource allocation; highlighting how fairness in decision making processes can overcome the sometimes intractable zero-sum resource allocation problem. In summary, his contributions to this field have set the stage for innovative programs of research to help in developing health policies and programs that are both in alignment with community values and implementable. Copyright © 2014 Elsevier Ltd. All rights reserved.

Formalizing Evaluation Procedures for Marketing Faculty Research Performance.

ERIC Educational Resources Information Center

McDermott, Dennis R.; And Others

1994-01-01

Results of a national survey of marketing department heads (n=142) indicate that few marketing departments have formalized the development and communication of research performance standards to faculty. Guidelines and methods to accomplish those procedures most efficiently were proposed. (Author/JOW)

Development of procedures for identifying high-crash locations and prioritizing safety improvements

DOT National Transportation Integrated Search

2003-06-01

The objectives of this study were to review and analyze the current procedures for identifying high-crash locations and evaluating and prioritizing roadway safety improvements at high-crash locations, and to recommend improved methods. Several tasks ...

Development of procedures for identifying high-crash locations and prioritizing safety improvements.

DOT National Transportation Integrated Search

2003-06-01

The objectives of this study were to review and analyze the current procedures for identifying high-crash locations and evaluating and prioritizing roadway safety improvements at high-crash locations, and to recommend improved methods. Several tasks ...

Development of a highly automated system for the remote evaluation of individual tree parameters

Treesearch

Richard Pollock

2000-01-01

A highly-automated procedure for remotely estimating individual tree location, crown diameter, species class, and height has been developed. This procedure will involve the use of a multimodal airborne sensing system that consists of a digital frame camera, a scanning laser rangefinder, and a position and orientation measurement system. Data from the multimodal sensing...

Integrating Mobile Phones into Science Teaching to Help Students Develop a Procedure to Evaluate the Corrosion Rate of Iron in Simulated Seawater

ERIC Educational Resources Information Center

Moraes, Edgar P.; Confessor, Mario R.; Gasparotto, Luiz H. S.

2015-01-01

This article proposes an indirect method to evaluate the corrosion rate of iron nail in simulated seawater. The official procedure is based on the direct measurement of the specimen's weight loss over time; however, a highly precise scale is required and such equipment may not be easily available. On the other hand, mobile phones equipped with…

Management systems research study

NASA Technical Reports Server (NTRS)

Bruno, A. V.

1975-01-01

The development of a Monte Carlo simulation of procurement activities at the NASA Ames Research Center is described. Data cover: simulation of the procurement cycle, construction of a performance evaluation model, examination of employee development, procedures and review of evaluation criteria for divisional and individual performance evaluation. Determination of the influences and apparent impact of contract type and structure and development of a management control system for planning and controlling manpower requirements.

ASK ME--A Merit Promotion System

ERIC Educational Resources Information Center

Johnson, Michael L.; McCloskey, Kenneth R.

1978-01-01

Describes a procedure developed at the Red River Army Depot, Texarkana, Texas, for selecting and evaluating personnel called AKS ME (Ability, Skill and Knowledge Merit Evaluation), consisting of four basic steps: job analysis, examination plan, candidate evaluation, and validation. (MF)

How to Activate Teachers through Teacher Evaluation?

ERIC Educational Resources Information Center

Tuytens, Melissa; Devos, Geert

2014-01-01

There is a general doubt on whether teacher evaluation can contribute to teachers' professional development. Recently, standards-based teacher evaluation has been introduced in many countries to improve teaching practice. This study wants to investigate which teacher evaluation procedural, leadership, and teacher characteristics can stimulate…

A field test of procedures for evaluating and scheduling white-pine weevil control

Treesearch

Robert P. Ford; Robert L. Talerico; D. Gordon Mott

1965-01-01

Procedures have recently been developed that permit economic and biological information to be integrated in making decisions about the need for control against the white-pine weevil, and in scheduling control in young white pine plantations. The procedures are based upon studies of the magnitude of economic losses that result from weevil attack in white pine and upon...

Acquisition of Motor and Cognitive Skills through Repetition in Typically Developing Children

PubMed Central

Magallón, Sara; Narbona, Juan; Crespo-Eguílaz, Nerea

2016-01-01

Background Procedural memory allows acquisition, consolidation and use of motor skills and cognitive routines. Automation of procedures is achieved through repeated practice. In children, improvement in procedural skills is a consequence of natural neurobiological development and experience. Methods The aim of the present research was to make a preliminary evaluation and description of repetition-based improvement of procedures in typically developing children (TDC). Ninety TDC children aged 6–12 years were asked to perform two procedural learning tasks. In an assembly learning task, which requires predominantly motor skills, we measured the number of assembled pieces in 60 seconds. In a mirror drawing learning task, which requires more cognitive functions, we measured time spent and efficiency. Participants were tested four times for each task: three trials were consecutive and the fourth trial was performed after a 10-minute nonverbal interference task. The influence of repeated practice on performance was evaluated by means of the analysis of variance with repeated measures and the paired-sample test. Correlation coefficients and simple linear regression test were used to examine the relationship between age and performance. Results TDC achieved higher scores in both tasks through repetition. Older children fitted more pieces than younger ones in assembling learning and they were faster and more efficient at the mirror drawing learning task. Conclusions These findings indicate that three consecutive trials at a procedural task increased speed and efficiency, and that age affected basal performance in motor-cognitive procedures. PMID:27384671

Acquisition of Motor and Cognitive Skills through Repetition in Typically Developing Children.

PubMed

Magallón, Sara; Narbona, Juan; Crespo-Eguílaz, Nerea

2016-01-01

Procedural memory allows acquisition, consolidation and use of motor skills and cognitive routines. Automation of procedures is achieved through repeated practice. In children, improvement in procedural skills is a consequence of natural neurobiological development and experience. The aim of the present research was to make a preliminary evaluation and description of repetition-based improvement of procedures in typically developing children (TDC). Ninety TDC children aged 6-12 years were asked to perform two procedural learning tasks. In an assembly learning task, which requires predominantly motor skills, we measured the number of assembled pieces in 60 seconds. In a mirror drawing learning task, which requires more cognitive functions, we measured time spent and efficiency. Participants were tested four times for each task: three trials were consecutive and the fourth trial was performed after a 10-minute nonverbal interference task. The influence of repeated practice on performance was evaluated by means of the analysis of variance with repeated measures and the paired-sample test. Correlation coefficients and simple linear regression test were used to examine the relationship between age and performance. TDC achieved higher scores in both tasks through repetition. Older children fitted more pieces than younger ones in assembling learning and they were faster and more efficient at the mirror drawing learning task. These findings indicate that three consecutive trials at a procedural task increased speed and efficiency, and that age affected basal performance in motor-cognitive procedures.

Flight evaluation of two-segment approaches using area navigation guidance equipment

NASA Technical Reports Server (NTRS)

Schwind, G. K.; Morrison, J. A.; Nylen, W. E.; Anderson, E. B.

1976-01-01

A two-segment noise abatement approach procedure for use on DC-8-61 aircraft in air carrier service was developed and evaluated. The approach profile and procedures were developed in a flight simulator. Full guidance is provided throughout the approach by a Collins Radio Company three-dimensional area navigation (RNAV) system which was modified to provide the two-segment approach capabilities. Modifications to the basic RNAV software included safety protection logic considered necessary for an operationally acceptable two-segment system. With an aircraft out of revenue service, the system was refined and extensively flight tested, and the profile and procedures were evaluated by representatives of the airlines, airframe manufacturers, the Air Line Pilots Association, and the Federal Aviation Adminstration. The system was determined to be safe and operationally acceptable. It was then placed into scheduled airline service for an evaluation during which 180 approaches were flown by 48 airline pilots. The approach was determined to be compatible with the airline operational environment, although operation of the RNAV system in the existing terminal area air traffic control environment was difficult.

Development of laboratory oxidative aging procedures for asphalt cements and asphalt mixtures.

DOT National Transportation Integrated Search

1986-12-01

An evaluation of an oxidative aging procedure for asphalt materials is described. Test results and the effectiveness of the aging device used are presented. The study was performed by Oregon State University and the Oregon Department of Transportatio...

Developing a Teacher Evaluation Instrument to Provide Formative Feedback Using Student Ratings of Teaching Acts

ERIC Educational Resources Information Center

van der Lans, Rikkert M.; van de Grift, Wim J. C. M.; van Veen, Klaas

2015-01-01

This study reports on the development of a teacher evaluation instrument, based on students' observations, which exhibits cumulative ordering in terms of the complexity of teaching acts. The study integrates theory on teacher development with theory on teacher effectiveness and applies a cross-validation procedure to verify whether teaching acts…

Compound estimation procedures in reliability

NASA Technical Reports Server (NTRS)

Barnes, Ron

1990-01-01

At NASA, components and subsystems of components in the Space Shuttle and Space Station generally go through a number of redesign stages. While data on failures for various design stages are sometimes available, the classical procedures for evaluating reliability only utilize the failure data on the present design stage of the component or subsystem. Often, few or no failures have been recorded on the present design stage. Previously, Bayesian estimators for the reliability of a single component, conditioned on the failure data for the present design, were developed. These new estimators permit NASA to evaluate the reliability, even when few or no failures have been recorded. Point estimates for the latter evaluation were not possible with the classical procedures. Since different design stages of a component (or subsystem) generally have a good deal in common, the development of new statistical procedures for evaluating the reliability, which consider the entire failure record for all design stages, has great intuitive appeal. A typical subsystem consists of a number of different components and each component has evolved through a number of redesign stages. The present investigations considered compound estimation procedures and related models. Such models permit the statistical consideration of all design stages of each component and thus incorporate all the available failure data to obtain estimates for the reliability of the present version of the component (or subsystem). A number of models were considered to estimate the reliability of a component conditioned on its total failure history from two design stages. It was determined that reliability estimators for the present design stage, conditioned on the complete failure history for two design stages have lower risk than the corresponding estimators conditioned only on the most recent design failure data. Several models were explored and preliminary models involving bivariate Poisson distribution and the Consael Process (a bivariate Poisson process) were developed. Possible short comings of the models are noted. An example is given to illustrate the procedures. These investigations are ongoing with the aim of developing estimators that extend to components (and subsystems) with three or more design stages.

Evaluating the Utility of Web-Based Consumer Support Tools Using Rough Sets

NASA Astrophysics Data System (ADS)

Maciag, Timothy; Hepting, Daryl H.; Slezak, Dominik; Hilderman, Robert J.

On the Web, many popular e-commerce sites provide consumers with decision support tools to assist them in their commerce-related decision-making. Many consumers will rank the utility of these tools quite highly. Data obtained from web usage mining analyses, which may provide knowledge about a user's online experiences, could help indicate the utility of these tools. This type of analysis could provide insight into whether provided tools are adequately assisting consumers in conducting their online shopping activities or if new or additional enhancements need consideration. Although some research in this regard has been described in previous literature, there is still much that can be done. The authors of this paper hypothesize that a measurement of consumer decision accuracy, i.e. a measurement preferences, could help indicate the utility of these tools. This paper describes a procedure developed towards this goal using elements of rough set theory. The authors evaluated the procedure using two support tools, one based on a tool developed by the US-EPA and the other developed by one of the authors called cogito. Results from the evaluation did provide interesting insights on the utility of both support tools. Although it was shown that the cogito tool obtained slightly higher decision accuracy, both tools could be improved from additional enhancements. Details of the procedure developed and results obtained from the evaluation will be provided. Opportunities for future work are also discussed.

Project W-314 specific test and evaluation plan for AZ tank farm upgrades

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hays, W.H.

1998-08-12

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made by the addition of the SN-631 transfer line from the AZ-O1A pit to the AZ-02A pit by the W-314 Project. The STEP develops the outline for test procedures that verify the system`s performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation P1 an (TEP). Testing includes Validations and Verifications (e.g., Commercial Grade Item Dedication activities, etc), Factory Tests and Inspections (FTIs), installation tests andmore » inspections, Construction Tests and Inspections (CTIs), Acceptance Test Procedures (ATPs), Pre-Operational Test Procedures (POTPs), and Operational Test Procedures (OTPs). The STEP will be utilized in conjunction with the TEP for verification and validation.« less

The Doctoral Portfolio: Centerpiece of a Comprehensive System of Evaluation

ERIC Educational Resources Information Center

Cobia, Debra C.; Carney, Jamie S.; Buckhalt, Joseph A.; Middleton, Renee A.; Shannon, David M.; Trippany, Robyn; Kunkel, Elizabeth

2005-01-01

The authors describe the process used to revise a traditional doctoral student evaluation system from one that consisted of written comprehensive and final oral examinations to one that features portfolio development. Student competence, expected student outcomes in each competency area, procedures for portfolio development, and documents and…

Women in Technical Education. Annual Report 1990-91.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

First-year activities of Women in Technical Education, a project to develop a model for women in that field, were evaluated. A formative evaluation showed that intense development and implementation activity enabled achievement of first-year goals and objectives during the 1990-91 year. Procedures to accomplish objectives were effective.…

Faculty Development Manual for the School of Allied Health Sciences, University of Texas Medical Branch at Galveston.

ERIC Educational Resources Information Center

Texas Univ., Galveston. Medical Branch.

The contents of this guide, adopted for a one-year pilot study, include: standard operating procedures for the faculty development/effectiveness document (performance and evaluation contract); instructions and forms for evaluating effectiveness in teaching, administrative duties, and professional activities; and a faculty…

Assessing the Student-Instructional Setting Interface Using an Eco-Behavioral Observation System.

ERIC Educational Resources Information Center

Hendrickson, Jo M.

1992-01-01

An eco-behavioral observation system was developed for use with students with behavior disorders or emotional disturbances. Discussed are the ecosystem definition, the student-instructional setting interface, and the assessment procedure, including evaluation of the quality of academic responding, program evaluation, staff development, and…

Standardized Evaluation for Multi-National Development Programs.

ERIC Educational Resources Information Center

Farrell, W. Timothy

This paper takes the position that standardized evaluation formats and procedures for multi-national development programs are not only desirable but possible in diverse settings. The key is the localization of standard systems, which involves not only the technical manipulation of items and scales, but also the contextual interpretation of…

The Development and Validation of the Inquiry Science Observation Coding Sheet

ERIC Educational Resources Information Center

Brandon, P. R.; Taum, A. K. H.; Young, D. B.; Pottenger, F. M., III

2008-01-01

Evaluation reports increasingly document the degree of program implementation, particularly the extent to which programs adhere to prescribed steps and procedures. Many reports are cursory, however, and few, if any, fully portray the long and winding path taken when developing evaluation instruments, particularly observation instruments. In this…

Clustering algorithm evaluation and the development of a replacement for procedure 1. [for crop inventories

NASA Technical Reports Server (NTRS)

Lennington, R. K.; Johnson, J. K.

1979-01-01

An efficient procedure which clusters data using a completely unsupervised clustering algorithm and then uses labeled pixels to label the resulting clusters or perform a stratified estimate using the clusters as strata is developed. Three clustering algorithms, CLASSY, AMOEBA, and ISOCLS, are compared for efficiency. Three stratified estimation schemes and three labeling schemes are also considered and compared.

How Do You Evaluate Everyone Who Isn't a Teacher? An Adaptable Evaluation Model for Professional Support Personnel.

ERIC Educational Resources Information Center

Stronge, James H.; And Others

The evaluation of professional support personnel in the schools has been a neglected area in educational evaluation. The Center for Research on Educational Accountability and Teacher Evaluation (CREATE) has worked to develop a conceptually sound evaluation model and then to translate the model into practical evaluation procedures that facilitate…

Evaluating the Stage Learning Hypothesis.

ERIC Educational Resources Information Center

Thomas, Hoben

1980-01-01

A procedure for evaluating the Genevan stage learning hypothesis is illustrated by analyzing Inhelder, Sinclair, and Bovet's guided learning experiments (in "Learning and the Development of Cognition." Cambridge: Harvard University Press, 1974). (Author/MP)

Performance evaluation of Olympic weightlifters.

PubMed

Garhammer, J

1979-01-01

The comparison of weights lifted by athletes in different bodyweight categories is a continuing problem for the sport of olympic weightlifting. An objective mechanical evaluation procedure was developed using basic ideas from a model proposed by Ranta in 1975. This procedure was based on more realistic assumptions than the original model and considered both vertical and horizontal bar movements. Utilization of data obtained from film of national caliber lifters indicated that the proposed method was workable, and that the evaluative indices ranked lifters in reasonable order relative to other comparative techniques.

Development of a patient-specific surgical simulator for pediatric laparoscopic procedures.

PubMed

Saber, Nikoo R; Menon, Vinay; St-Pierre, Jean C; Looi, Thomas; Drake, James M; Cyril, Xavier

2014-01-01

The purpose of this study is to develop and evaluate a pediatric patient-specific surgical simulator for the planning, practice, and validation of laparoscopic surgical procedures prior to intervention, initially focusing on the choledochal cyst resection and reconstruction scenario. The simulator is comprised of software elements including a deformable body physics engine, virtual surgical tools, and abdominal organs. Hardware components such as haptics-enabled hand controllers and a representative endoscopic tool have also been integrated. The prototype is able to perform a number of surgical tasks and further development work is under way to simulate the complete procedure with acceptable fidelity and accuracy.

DEVELOPMENT OF A PROTOCOL FOR TESTING EFFECTS OF TOXIC SUBSTANCES ON PLANTS

EPA Science Inventory

This study was designed to devise a rapid, simple, reproducible bioassay procedure to determine effects of so-called 'toxic substances in the environment' on vegetation and provide a standardized procedure for evaluation and comparison of effects of diverse compounds. Eight diffe...

Capacity improvement analytical tools and benchmark development for terminal operations

DOT National Transportation Integrated Search

2009-10-01

With U.S. air traffic predicted to triple over the : next fifteen years, new technologies and procedures are : being considered to cope with this growth. As such, it : may be of use to quickly and easily evaluate any new : technologies or procedures ...

Financial and testamentary capacity evaluations: procedures and assessment instruments underneath a functional approach.

PubMed

Sousa, Liliana B; Simões, Mário R; Firmino, Horácio; Peisah, Carmelle

2014-02-01

Mental health professionals are frequently involved in mental capacity determinations. However, there is a lack of specific measures and well-defined procedures for these evaluations. The main purpose of this paper is to provide a review of financial and testamentary capacity evaluation procedures, including not only the traditional neuropsychological and functional assessment but also the more recently developed forensic assessment instruments (FAIs), which have been developed to provide a specialized answer to legal systems regarding civil competencies. Here the main guidelines, papers, and other references are reviewed in order to achieve a complete and comprehensive selection of instruments used in the assessment of financial and testamentary capacity. Although some specific measures for financial abilities have been developed recently, the same is not true for testamentary capacity. Here are presented several instruments or methodologies for assessing financial and testamentary capacity, including neuropsychological assessment, functional assessment scales, performance based functional assessment instruments, and specific FAIs. FAIs are the only specific instruments intended to provide a specific and direct answer to the assessment of financial capacity based on legal systems. Considering the need to move from a diagnostic to a functional approach in financial and testamentary capacity evaluations, it is essential to consider both general functional examination as well as cognitive functioning.

A Need for a Framework for Curriculum Evaluation in Oman

ERIC Educational Resources Information Center

Al-Jardani, Khalid Salim; Siraj, Saedah; Abedalaziz, Nabeel

2012-01-01

The field of curriculum evaluation is a key part of the educational process. This means that this area needs to be developed continuously and requires ongoing research. This paper highlights curriculum evaluation in Oman, different evaluation procedures and methods and instruments used. The need for a framework for curriculum evaluation is a vital…

Design and Evaluation of Scour for Bridges Using HEC-18 : technical brief.

DOT National Transportation Integrated Search

2017-07-01

This project developed a new approach for evaluating erosive scour at New Jersey bridges over non-tidal waterways. The main deliverable was the Scour Evaluation Model (SEM), which offers new analysis procedures, while still retaining the applicable p...

Knowing the operative game plan: a novel tool for the assessment of surgical procedural knowledge.

PubMed

Balayla, Jacques; Bergman, Simon; Ghitulescu, Gabriela; Feldman, Liane S; Fraser, Shannon A

2012-08-01

What is the source of inadequate performance in the operating room? Is it a lack of technical skills, poor judgment or a lack of procedural knowledge? We created a surgical procedural knowledge (SPK) assessment tool and evaluated its use. We interviewed medical students, residents and training program staff on SPK assessment tools developed for 3 different common general surgery procedures: inguinal hernia repair with mesh in men, laparoscopic cholecystectomy and right hemicolectomy. The tools were developed as a step-wise assessment of specific surgical procedures based on techniques described in a current surgical text. We compared novice (medical student to postgraduate year [PGY]-2) and expert group (PGY-3 to program staff) scores using the Mann-Whitney U test. We calculated the total SPK score and defined a cut-off score using receiver operating characteristic analysis. In all, 5 participants in 7 different training groups (n = 35) underwent an interview. Median scores for each procedure and overall SPK scores increased with experience. The median SPK for novices was 54.9 (95% confidence interval [CI] 21.6-58.8) compared with 98.05 (95% CP 94.1-100.0) for experts (p = 0.012). The SPK cut-off score of 93.1 discriminates between novice and expert surgeons. Surgical procedural knowledge can reliably be assessed using our SPK assessment tool. It can discriminate between novice and expert surgeons for common general surgical procedures. Future studies are planned to evaluate its use for more complex procedures.

Evaluation of animal models of neurobehavioral disorders

PubMed Central

van der Staay, F Josef; Arndt, Saskia S; Nordquist, Rebecca E

2009-01-01

Animal models play a central role in all areas of biomedical research. The process of animal model building, development and evaluation has rarely been addressed systematically, despite the long history of using animal models in the investigation of neuropsychiatric disorders and behavioral dysfunctions. An iterative, multi-stage trajectory for developing animal models and assessing their quality is proposed. The process starts with defining the purpose(s) of the model, preferentially based on hypotheses about brain-behavior relationships. Then, the model is developed and tested. The evaluation of the model takes scientific and ethical criteria into consideration. Model development requires a multidisciplinary approach. Preclinical and clinical experts should establish a set of scientific criteria, which a model must meet. The scientific evaluation consists of assessing the replicability/reliability, predictive, construct and external validity/generalizability, and relevance of the model. We emphasize the role of (systematic and extended) replications in the course of the validation process. One may apply a multiple-tiered 'replication battery' to estimate the reliability/replicability, validity, and generalizability of result. Compromised welfare is inherent in many deficiency models in animals. Unfortunately, 'animal welfare' is a vaguely defined concept, making it difficult to establish exact evaluation criteria. Weighing the animal's welfare and considerations as to whether action is indicated to reduce the discomfort must accompany the scientific evaluation at any stage of the model building and evaluation process. Animal model building should be discontinued if the model does not meet the preset scientific criteria, or when animal welfare is severely compromised. The application of the evaluation procedure is exemplified using the rat with neonatal hippocampal lesion as a proposed model of schizophrenia. In a manner congruent to that for improving animal models, guided by the procedure expounded upon in this paper, the developmental and evaluation procedure itself may be improved by careful definition of the purpose(s) of a model and by defining better evaluation criteria, based on the proposed use of the model. PMID:19243583

Middle-ear microsurgery simulation to improve new robotic procedures.

PubMed

Kazmitcheff, Guillaume; Nguyen, Yann; Miroir, Mathieu; Péan, Fabien; Ferrary, Evelyne; Cotin, Stéphane; Sterkers, Olivier; Duriez, Christian

2014-01-01

Otological microsurgery is delicate and requires high dexterity in bad ergonomic conditions. To assist surgeons in these indications, a teleoperated system, called RobOtol, is developed. This robot enhances gesture accuracy and handiness and allows exploration of new procedures for middle ear surgery. To plan new procedures that exploit the capacities given by the robot, a surgical simulator is developed. The simulation reproduces with high fidelity the behavior of the anatomical structures and can also be used as a training tool for an easier control of the robot for surgeons. In the paper, we introduce the middle ear surgical simulation and then we perform virtually two challenging procedures with the robot. We show how interactive simulation can assist in analyzing the benefits of robotics in the case of complex manipulations or ergonomics studies and allow the development of innovative surgical procedures. New robot-based microsurgical procedures are investigated. The improvement offered by RobOtol is also evaluated and discussed.

Middle-Ear Microsurgery Simulation to Improve New Robotic Procedures

PubMed Central

Kazmitcheff, Guillaume; Nguyen, Yann; Miroir, Mathieu; Péan, Fabien; Ferrary, Evelyne; Cotin, Stéphane; Sterkers, Olivier; Duriez, Christian

2014-01-01

Otological microsurgery is delicate and requires high dexterity in bad ergonomic conditions. To assist surgeons in these indications, a teleoperated system, called RobOtol, is developed. This robot enhances gesture accuracy and handiness and allows exploration of new procedures for middle ear surgery. To plan new procedures that exploit the capacities given by the robot, a surgical simulator is developed. The simulation reproduces with high fidelity the behavior of the anatomical structures and can also be used as a training tool for an easier control of the robot for surgeons. In the paper, we introduce the middle ear surgical simulation and then we perform virtually two challenging procedures with the robot. We show how interactive simulation can assist in analyzing the benefits of robotics in the case of complex manipulations or ergonomics studies and allow the development of innovative surgical procedures. New robot-based microsurgical procedures are investigated. The improvement offered by RobOtol is also evaluated and discussed. PMID:25157373

What Counts is not Falling … but Landing1

PubMed Central

BROUSSELLE, ASTRID

2012-01-01

Implementation evaluations, also called process evaluations, involve studying the development of programmes, and identifying and understanding their strengths and weaknesses. Undertaking an implementation evaluation offers insights into evaluation objectives, but does not help the researcher develop a research strategy. During the implementation analysis of the UNAIDS drug access initiative in Chile, the strategic analysis model developed by Crozier and Friedberg was used. However, a major incompatibility was noted between the procedure put forward by Crozier and Friedberg and the specific characteristics of the programme being evaluated. In this article, an adapted strategic analysis model for programme evaluation is proposed. PMID:23526306

Development, design, and flight test evaluation of a continuous descent approach procedure for nighttime operation at Louisville International Airport.

DOT National Transportation Integrated Search

2006-01-09

The design and flight test of a Continuous Descent Approach (CDA) : procedure for regular nighttime operation at Louisville : International Airport are described in this report. Results of : the analyses of aircraft and FMS performance indicate that ...

Individualized Foreign Language Program.

ERIC Educational Resources Information Center

Joint School District No. 1, West Bend, WI.

A summary of project objectives, procedures, and dissemination is developed in this report of work initiated in June 1968. Programs in French, German, and Spanish for students in junior and senior high schools are evaluated with special reference to attitudes, aptitude, achievement, and program management. A final section reviews procedures and…

Computerization of a preanesthetic evaluation and user satisfaction evaluation.

PubMed

Arias, Antonio; Benítez, Sonia; Canosa, Daniela; Borbolla, Damián; Staccia, Gustavo; Plazzotta, Fernando; Casais, Marcela; Michelangelo, Hernán; Luna, Daniel; Bernaldo de Quirós, Fernán Gonzalez

2010-01-01

Preanesthetic evaluation purpose is to reduce morbidity and mortality through the review of the patient's medical history, clinical examination, and targeted clinical studies, providing referrals for medical consultations when appropriated. Changes in patient care, standards of health information management and patterns of perioperative care, have resulted in a re-conceptualization of this process where the documentation of patient medical information, the efforts in training and maintaining the integrity of the medical-legal evaluation are areas of concern. The aim of this paper is to describe the design, development, training, and implementation of a computerized preanesthetic evaluation form associated to the evaluation of the user satisfaction with the system. Since the system went live in September 2008 there were 15121 closed structured forms, 60% for ambulatory procedures and 40 % for procedures that required hospital admission. 82% of total closed structured forms had recorded a risk of the procedures of 1-2, according to the American Society of Anesthesiologists classification. The survey indicates a positive general satisfaction of the users with the system.

Evaluation of liquefaction hazards in Washington state.

DOT National Transportation Integrated Search

2008-12-01

This report describes the results of a detailed investigation of improved procedures for evaluation of : liquefaction hazards in Washington State, and describes the development and use of a computer : program, WSliq, that allows rapid and convenient ...

Field evaluation of court procedures for identifying problem drinkers

DOT National Transportation Integrated Search

1973-12-01

Twelve Alcohol Safety Action Projects cooperated in field evaluation of HSRI-developed questionnaire and interview protocols for identifying problem drinkers. Responses from 709 Driving While Intoxicated defendants from three ASAPs with differing dem...

Thiokol/Wasatch installation evaluation of the redesigned field joint protection system (concepts 1 and 3)

NASA Technical Reports Server (NTRS)

Cook, M.

1989-01-01

The procedures, performance, and results obtained from the Thiokol Corporation/Wasatch Redesigned Field Joint Protection System (FJPS) Installation Evaluation are documented. The purpose of the evaluation was to demonstrate and develop the procedures required to install two different concepts (referred to as Concepts 1 and 3) of the redesigned FJPS. The processing capability of each configuration was then evaluated and compared. The FJPS is installed on redesigned solid rocket motors (RSRM) to protect the field joints from rain intrusion and to maintain the joint temperature sensor measurement between 85 and 122 F while the boosters are on the launch pad. The FJPS is being redesigned to reduce installation timelines at KSC and to simplify or eliminate installation processing problems related to the present design of an EPDM moisture seal/extruded cork combination. Several installation techniques were evaluated, and a preferred method of application was developed for each concept. The installations were performed with the test article in the vertical (flight) position. Comparative timelines between the two concepts were also developed. An additional evaluation of the Concept 3 configuration was performed with the test article in the horizontal position, to simulate an overhead installation on a technical evaluation motor (TEM).

Design and evaluation guidelines for Department of Energy facilities subjected to natural phenomena hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kennedy, R.P.; Short, S.A.; McDonald, J.R.

1990-06-01

The Department of Energy (DOE) and the DOE Natural Phenomena Hazards Panel have developed uniform design and evaluation guidelines for protection against natural phenomena hazards at DOE sites throughout the United States. The goal of the guidelines is to assure that DOE facilities can withstand the effects of natural phenomena such as earthquakes, extreme winds, tornadoes, and flooding. The guidelines apply to both new facilities (design) and existing facilities (evaluation, modification, and upgrading). The intended audience is primarily the civil/structural or mechanical engineers conducting the design or evaluation of DOE facilities. The likelihood of occurrence of natural phenomena hazards atmore » each DOE site has been evaluated by the DOE Natural Phenomena Hazard Program. Probabilistic hazard models are available for earthquake, extreme wind/tornado, and flood. Alternatively, site organizations are encouraged to develop site-specific hazard models utilizing the most recent information and techniques available. In this document, performance goals and natural hazard levels are expressed in probabilistic terms, and design and evaluation procedures are presented in deterministic terms. Design/evaluation procedures conform closely to common standard practices so that the procedures will be easily understood by most engineers. Performance goals are expressed in terms of structure or equipment damage to the extent that: (1) the facility cannot function; (2) the facility would need to be replaced; or (3) personnel are endangered. 82 refs., 12 figs., 18 tabs.« less

Submission Patterns: "Measurement and Evaluation in Counseling and Development" Author and Article Characteristics from 1990 to 2009

ERIC Educational Resources Information Center

Erford, Bradley T.; Miller, Emily M.; Duncan, Kelly; Erford, Breann M.

2010-01-01

Submission patterns of articles accepted for publication in "Measurement and Evaluation in Counseling and Development" from 1990 to 2009 are reviewed. Trends are analyzed in article content (i.e., type, issue, statistical procedures) and author demographic characteristics (e.g., sex, nation of domicile, professional title, departmental…

Linking Student Evaluations to Institutional Goals: A Change Story

ERIC Educational Resources Information Center

Palermo, Josephine

2013-01-01

For the past 30?years, beginning with the seminal work of Herbert Marsh in Australia and New Zealand, institutions of higher education have developed internal practices and procedures to collect and analyse student evaluations of teaching and learning. However, the question remains: has this development resulted in the achievement of institutional…

Development and Evaluation of a Novel Pan-Specialty Virtual Reality Surgical Simulator for Smartphones.

PubMed

Nehme, Jean; Bahsoun, Ali N; Chow, Andre

2016-01-01

Touch Surgery is a novel simulator that allows cognitive task simulation and rehearsal of surgical procedures. Touch Surgery is designed for Apple and Android smartphones and tablets. This allows a global community of surgical professionals to review the steps of a procedure and test their competence. Content on Touch Surgery is developed with expert surgeons in the field from world leading institutions. Here we describe the development of Touch Surgery, its adoption by the global training community.

Velocity distribution of electrons in time-varying low-temperature plasmas: progress in theoretical procedures over the past 70 years

NASA Astrophysics Data System (ADS)

Makabe, Toshiaki

2018-03-01

A time-varying low-temperature plasma sustained by electrical powers with various kinds of fRequencies has played a key role in the historical development of new technologies, such as gas lasers, ozonizers, micro display panels, dry processing of materials, medical care, and so on, since World War II. Electrons in a time-modulated low-temperature plasma have a proper velocity spectrum, i.e. velocity distribution dependent on the microscopic quantum characteristics of the feed gas molecule and on the external field strength and the frequency. In order to solve and evaluate the time-varying velocity distribution, we have mostly two types of theoretical methods based on the classical and linear Boltzmann equations, namely, the expansion method using the orthogonal function and the procedure of non-expansional temporal evolution. Both methods have been developed discontinuously and progressively in synchronization with those technological developments. In this review, we will explore the historical development of the theoretical procedure to evaluate the electron velocity distribution in a time-varying low-temperature plasma over the past 70 years.

Title VI-B, Education of the Handicapped Act Annual Program Plan Fiscal Year 1979-Kansas State Department of Education.

ERIC Educational Resources Information Center

Kansas State Dept. of Education, Topeka.

The Kansas state plan for FY 1979 includes information on the following topics: full educational opportunities goal, policy on priorities, child identification, personnel development, individualized education program, procedural safeguards, least restrictive environment, protection in evaluation procedures, participation of private school…

Motivational Procedures Workshop: Planning, Conduct, Evaluation and Follow-up.

ERIC Educational Resources Information Center

Mohan, Madan; Hull, Ronald E.

This description of the Motivational Procedures workshop deals with the problem of low motivational levels of students at all grade levels. The objectives of the workshop included creating awareness of the problem, testing motivation principles, determining through feedback the effectiveness of materials, and developing assessment instruments. The…

34 CFR 303.310 - Post-referral timeline (45 days).

Code of Federal Regulations, 2012 CFR

2012-07-01

... 34 Education 2 2012-07-01 2012-07-01 false Post-referral timeline (45 days). 303.310 Section 303... Post-Referral Procedures-Screenings, Evaluations, and Assessments § 303.310 Post-referral timeline (45...) The lead agency must develop procedures to ensure that in the event the circumstances described in (b...

Electrical screening procedure for solid ionic conductors

NASA Technical Reports Server (NTRS)

Kautz, H. E.; Singer, J.; Fielder, W. L.; Fordyce, J. S.

1973-01-01

An electrical screening method has been developed for preliminary evaluation of polycrystalline specimens of candidates for use as solid ionic conductive electrolytes in batteries. The procedure measures dielectric loss and capacitance, from which are calculated an ac conductivity attributed provisionally to ions and an activation energy for that conductivity. Electronic conductivity is directly measured. The screening procedure applied to sodium beta-alumina yielded acceptable values for conductivity and activation energy.

Evaluation of solution procedures for material and/or geometrically nonlinear structural analysis by the direct stiffness method.

NASA Technical Reports Server (NTRS)

Stricklin, J. A.; Haisler, W. E.; Von Riesemann, W. A.

1972-01-01

This paper presents an assessment of the solution procedures available for the analysis of inelastic and/or large deflection structural behavior. A literature survey is given which summarized the contribution of other researchers in the analysis of structural problems exhibiting material nonlinearities and combined geometric-material nonlinearities. Attention is focused at evaluating the available computation and solution techniques. Each of the solution techniques is developed from a common equation of equilibrium in terms of pseudo forces. The solution procedures are applied to circular plates and shells of revolution in an attempt to compare and evaluate each with respect to computational accuracy, economy, and efficiency. Based on the numerical studies, observations and comments are made with regard to the accuracy and economy of each solution technique.

A study of the stress wave factor technique for evaluation of composite materials

NASA Technical Reports Server (NTRS)

Duke, J. C., Jr.; Henneke, E. G., II; Kiernan, M. T.; Grosskopf, P. P.

1989-01-01

The acousto-ultrasonic approach for nondestructive evaluation provides a measurement procedure for quantifying the integrated effect of globally distributed damage characteristic of fiber reinforced composite materials. The evaluation procedure provides a stress wave factor that correlates closely with several material performance parameters. The procedure was investigated for a variety of materials including advanced composites, hybrid structure bonds, adhesive bonds, wood products, and wire rope. The research program focused primarily on development of fundamental understanding and applications advancements of acousto-ultrasonics for materials characterization. This involves characterization of materials for which detection, location, and identification of imperfections cannot at present be analyzed satisfactorily with mechanical performance prediction models. In addition to presenting definitive studies on application potentials, the understanding of the acousto-ultrasonic method as applied to advanced composites is reviewed.

What Counts is not Falling … but Landing: Strategic Analysis: An Adapted Model for Implementation Evaluation.

PubMed

Brousselle, Astrid

2004-04-01

Implementation evaluations, also called process evaluations, involve studying the development of programmes, and identifying and understanding their strengths and weaknesses. Undertaking an implementation evaluation offers insights into evaluation objectives, but does not help the researcher develop a research strategy. During the implementation analysis of the UNAIDS drug access initiative in Chile, the strategic analysis model developed by Crozier and Friedberg was used. However, a major incompatibility was noted between the procedure put forward by Crozier and Friedberg and the specific characteristics of the programme being evaluated. In this article, an adapted strategic analysis model for programme evaluation is proposed.

Evaluation plan for space station network interface units

NASA Technical Reports Server (NTRS)

Weaver, Alfred C.

1990-01-01

Outlined here is a procedure for evaluating network interface units (NIUs) produced for the Space Station program. The procedures should be equally applicable to the data management system (DMS) testbed NIUs produced by Honeywell and IBM. The evaluation procedures are divided into four areas. Performance measurement tools are hardware and software that must be developed in order to evaluate NIU performance. Performance tests are a series of tests, each of which documents some specific characteristic of NIU and/or network performance. In general, these performance tests quantify the speed, capacity, latency, and reliability of message transmission under a wide variety of conditions. Functionality tests are a series of tests and code inspections that demonstrate the functionality of the particular subset of ISO protocols which have been implemented in a given NIU. Conformance tests are a series of tests which would expose whether or not selected features within the ISO protocols are present and interoperable.

Surgical task analysis of simulated laparoscopic cholecystectomy with a navigation system.

PubMed

Sugino, T; Kawahira, H; Nakamura, R

2014-09-01

   Advanced surgical procedures, which have become complex and difficult, increase the burden of surgeons. Quantitative analysis of surgical procedures can improve training, reduce variability, and enable optimization of surgical procedures. To this end, a surgical task analysis system was developed that uses only surgical navigation information.    Division of the surgical procedure, task progress analysis, and task efficiency analysis were done. First, the procedure was divided into five stages. Second, the operating time and progress rate were recorded to document task progress during specific stages, including the dissecting task. Third, the speed of the surgical instrument motion (mean velocity and acceleration), as well as the size and overlap ratio of the approximate ellipse of the location log data distribution, was computed to estimate the task efficiency during each stage. These analysis methods were evaluated based on experimental validation with two groups of surgeons, i.e., skilled and "other" surgeons. The performance metrics and analytical parameters included incidents during the operation, the surgical environment, and the surgeon's skills or habits.    Comparison of groups revealed that skilled surgeons tended to perform the procedure in less time and involved smaller regions; they also manipulated the surgical instruments more gently.    Surgical task analysis developed for quantitative assessment of surgical procedures and surgical performance may provide practical methods and metrics for objective evaluation of surgical expertise.

Analyzing the School Evaluation Use Process To Make Evaluation Worth the Effort.

ERIC Educational Resources Information Center

Pechman, Ellen M.; King, Jean A.

This paper describes a structure for assessing the school evaluation use process developed from a longitudinal case study of districtwide and school level evaluation procedures in a large urban school district. Two fundamental questions guided the study: (1) Why isn't the evaluation process more useful to decision-makers and practitioners? and (2)…

Applications of remote sensing, volume 3

NASA Technical Reports Server (NTRS)

Landgrebe, D. A. (Principal Investigator)

1977-01-01

The author has identified the following significant results. Of the four change detection techniques (post classification comparison, delta data, spectral/temporal, and layered spectral temporal), the post classification comparison was selected for further development. This was based upon test performances of the four change detection method, straightforwardness of the procedures, and the output products desired. A standardized modified, supervised classification procedure for analyzing the Texas coastal zone data was compiled. This procedure was developed in order that all quadrangles in the study are would be classified using similar analysis techniques to allow for meaningful comparisons and evaluations of the classifications.

Evaluation of the procedure for separating barley from other spring small grains. [North Dakota, South Dakota, Minnesota and Montana

NASA Technical Reports Server (NTRS)

Magness, E. R. (Principal Investigator)

1980-01-01

The success of the Transition Year procedure to separate and label barley and the other small grains was assessed. It was decided that developers of the procedure would carry out the exercise in order to prevent compounding procedural problems with implementation problems. The evaluation proceeded by labeling the sping small grains first. The accuracy of this labeling was, on the average, somewhat better than that in the Transition Year operations. Other departures from the original procedure included a regionalization of the labeling process, the use of trend analysis, and the removal of time constraints from the actual processing. Segment selection, ground truth derivation, and data available for each segment in the analysis are discussed. Labeling accuracy is examined for North Dakota, South Dakota, Minnesota, and Montana as well as for the entire four-state area. Errors are characterized.

Medical tongue piercing – development and evaluation of a surgical protocol and the perception of procedural discomfort of the participants

PubMed Central

2014-01-01

Background A system providing disabled persons with control of various assistive devices with the tongue has been developed at Aalborg University in Denmark. The system requires an activation unit attached to the tongue with a small piercing. The aim of this study was to establish and evaluate a safe and tolerable procedure for medical tongue piercing and to evaluate the expected and perceived procedural discomfort. Methods Four tetraplegic subjects volunteered for the study. A surgical protocol for a safe insertion of a tongue barbell piercing was presented using sterilized instruments and piercing parts. Moreover, post-procedural observations of participant complications such as bleeding, edema, and infection were recorded. Finally, procedural discomforts were monitored by VAS scores of pain, changes in taste and speech as well as problems related to hitting the teeth. Results The piercings were all successfully inserted in less than 5 min and the pain level was moderate compared with oral injections. No bleeding, infection, embedding of the piercing, or tooth/gingival injuries were encountered; a moderate edema was found in one case without affecting the speech. In two cases the piercing rod later had to be replaced by a shorter rod, because participants complained that the rod hit their teeth. The replacements prevented further problems. Moreover, loosening of balls was encountered, which could be prevented with the addition of dental glue. No cases of swallowing or aspiration of the piercing parts were recorded. Conclusions The procedure proved simple, fast, and safe for insertion of tongue piercings for tetraplegic subjects in a clinical setting. The procedure represented several precautions in order to avoid risks in these susceptible participants with possible co-morbidity. No serious complications were encountered, and the procedure was found tolerable to the participants. The procedure may be used in future studies with tongue piercings being a prerequisite for similar systems, and this may include insertion in an out-patient setting. PMID:24684776

Developing a practical evaluation tool for preceptor use.

PubMed

Walsh, Catherine M; Seldomridge, Lisa A; Badros, Karen K

2008-01-01

After years of dissatisfaction with existing instruments, a tool for preceptors to evaluate an undergraduate student's clinical performance was developed, with preceptors' input in its construction. A 2-year pilot evaluation revealed notable problems including excessively high preceptor ratings and significant disparities between faculty and preceptor ratings. Further revisions were made, reducing indicators to those which the preceptors can actually evaluate on an everyday basis and developing a rubric. Additional recommendations to bolster the quality of ratings are improving orientation and guidance of preceptors and modifying procedures for giving feedback.

Coal gasification systems engineering and analysis. Appendix G: Commercial design and technology evaluation

NASA Technical Reports Server (NTRS)

1980-01-01

A technology evaluation of five coal gasifier systems (Koppers-Totzek, Texaco, Babcock and Wilcox, Lurgi and BGC/Lurgi) and procedures and criteria for evaluating competitive commercial coal gasification designs is presented. The technology evaluation is based upon the plant designs and cost estimates developed by the BDM-Mittelhauser team.

Formative Evaluation of Lectures; An Application of Stake's Evaluation Framework.

ERIC Educational Resources Information Center

Westphal, Walter W.; And Others

The problem of major concern to the Physics Education Evaluation Project (P.E.E.P.) involved the improvement of university physics teaching and learning. The present paper describes instruments and procedures developed for systematic formative evaluation of physics lectures. The data was drawn from two sections of a first year university physics…

The Development and Field Testing of Evaluation Workshop I: An Orientation.

ERIC Educational Resources Information Center

Klein, Stephen P.; Nadeau, Marc-Andre

The general purpose of an evaluation workshop is to orient school and state department of education personnel to the basic principles, procedures, and problems associated with evaluating educational programs and to the kinds of information an evaluation can provide for educational decision making. The workshop studied is based on the general…

Evaluation of School Education in Serbia

ERIC Educational Resources Information Center

Hebib, Emina; Spasenovic, Vera; Šaljic, Zorica

2015-01-01

In the education system of Serbia significant results have been achieved in the last ten years regarding the establishment and development of the evaluation system in education and the practical application of various types and procedures of evaluation. This paper gives a short overview of ways in which evaluation is carried out on elementary,…

Procedures for Trade and Industrial Program Development.

ERIC Educational Resources Information Center

Campbell, Clifton P.

The instructional systems development (ISD) approach for the development and accomplishment of vocational training programs provides a methodology for gathering and analyzing job information, developing instructional materials in a variety of media, conducting instruction, and evaluating and improving the effectiveness of training programs. This…

A simulator study for the development and evaluation of operating procedures on a supersonic cruise research transport to minimize airport-community noise

NASA Technical Reports Server (NTRS)

Grantham, W. D.; Smith, P. M.; Deal, P. L.

1980-01-01

Piloted-simulator studies were conducted to determine takeoff and landing operating procedures for a supersonic cruise research transport concept that result in predicted noise levels which meet current Federal Aviation Administration (FAA) certification standards. With the use of standard FAA noise certification test procedures, the subject simulated aircraft did not meet the FAA traded-noise-level standards during takeoff and landing. However, with the use of advanced procedures, this aircraft meets the traded-noise-level standards for flight crews with average skills. The advanced takeoff procedures developed involved violating some of the current Federal Aviation Regulations (FAR), but it was not necessary to violate any FAR noise-test conditions during landing approach. Noise contours were also determined for some of the simulated takeoffs and landings in order to indicate the noise-reduction advantages of using operational procedures other than standard.

Development of a mechanical rocker test procedure for ice melting capacity evaluation.

DOT National Transportation Integrated Search

2014-06-01

During Phase 2 of the NDOR deicing chemicals performance evaluation project (No. SPR-P1(10) P328), a : simple and economical test using a martini shaker to evaluate ice melting capacity of liquid deicers showed : good potential to become a standardiz...

A Comprehensive Guide to C3 System Development

DTIC Science & Technology

1990-03-01

This thesis provides guidelines to develop a C3 system, including both organizational and physical systems. It contains the concept, architecture ... design and engineering approaches, the integrated C3 framework, test and evaluation methodologies, system acquisition procedures, system development

Phrenic nerve injury after radiofrequency ablation of lung tumors: retrospective evaluation of the incidence and risk factors.

PubMed

Matsui, Yusuke; Hiraki, Takao; Gobara, Hideo; Uka, Mayu; Masaoka, Yoshihisa; Tada, Akihiro; Toyooka, Shinichi; Mitsuhashi, Toshiharu; Mimura, Hidefumi; Kanazawa, Susumu

2012-06-01

To retrospectively investigate the incidence of and risk factors for phrenic nerve injury after radiofrequency (RF) ablation of lung tumors. The study included 814 RF ablation procedures of lung tumors. To evaluate the development of phrenic nerve injury, chest radiographs obtained before and after the procedure were examined. Phrenic nerve injury was assumed to have developed if the diaphragmatic level was elevated after the procedure. To identify risk factors for phrenic nerve injury, multiple variables were compared between cases of phrenic nerve injury and randomly selected controls by using univariate analyses. Multivariate analysis was then performed to identify independent risk factors. Evaluation of phrenic nerve injury from chest radiographs was possible after 786 procedures. Evidence of phrenic nerve injury developed after 10 cases (1.3%). Univariate analysis revealed that larger tumor size (≥ 20 mm; P = .014), proximity of the phrenic nerve to the tumor (< 10 mm; P < .001), the use of larger electrodes (array diameter or noninsulated tip length ≥ 3 cm; P = .001), and higher maximum power applied during ablation (≥ 100 W; P < .001) were significantly associated with the development of phrenic nerve injury. Multivariate analysis demonstrated that the proximity of the phrenic nerve to the tumor (< 10 mm; P < .001) was a significant independent risk factor. The incidence of phrenic nerve injury after RF ablation was 1.3%. The proximity of the phrenic nerve to the tumor was an independent risk factor for phrenic nerve injury. Copyright © 2012 SIR. Published by Elsevier Inc. All rights reserved.

Integrating health technology assessment requirements in the clinical development of medicines: the experience from NICE scientific advice.

PubMed

Maignen, François; Osipenko, Leeza; Pinilla-Dominguez, Pilar; Crowe, Emily

2017-03-01

The primary objective of the study was to analyse the proposed clinical development and economic evaluation plans for investigational medicinal products for which pharmaceutical companies have sought health technology assessment (HTA) scientific advice (SA). We have selected and analysed all the scientific advice procedures undertaken by National Institute for Health and Care Excellence (NICE) SA between 1 January 2009 and 3 December 2015 for investigational medicinal products. We have mapped the questions asked by the companies and the areas of advice highlighted in the advice reports to the sections of the NICE methods guide to the technology appraisals (2013). An overwhelming proportion of SA procedures have addressed questions related to the clinical development and specifically the main pivotal efficacy studies. Approximately a quarter of the questions relate to the approaches to economic evaluation. Questions raised in European Medicines Agency-HTA procedures generally focus on clinical efficacy issues whereas cost-effectiveness ones tend to dominate in NICE-only procedures. Our analysis shows that the issues mostly discussed in the HTA SA are the choice of comparator, the generalisability of the clinical trial evidence to the NHS practice and the impact of the clinical trial outcomes on quality of life and survival. Less disagreement with the developers' plans was seen in the choice of clinical endpoints, population definition, position of the technology in the treatment pathway and study design. Scientific advice is designed to improve the quality of evidence and approaches to evidence generation for future regulatory approval and HTA evaluation. Our experience to date suggests that payer requirements are inconsistently integrated in the clinical development programmes. More efforts should be dedicated to demonstrating the clinical value of new medicinal products to patients and key decision-makers.

Development, test and evaluation of a computerized procedure for using Landsat data to estimate spring small grains acreage

NASA Technical Reports Server (NTRS)

Mohler, R. R. J.; Palmer, W. F.; Smyrski, M. M.; Baker, T. C.; Nazare, C. V.

1982-01-01

A number of methods which can provide information concerning crop acreages on the basis of a utilization of multispectral scanner (MSS) data require for their implementation a comparatively large amount of labor. The present investigation is concerned with a project designed to improve the efficiency of analysis through increased automation. The Caesar technique was developed to realize this objective. The processability rates of the Caesar procedure versus the historical state-of-the-art proportion estimation procedures were determined in an experiment. Attention is given to the study site, the aggregation technology, the results of the aggregation test, and questions of error characterization. It is found that the Caesar procedure, which has been developed for the spring small grains region of North America, is highly efficient and provides accurate results.

EMEA and Gene Therapy Medicinal Products Development in the European Union

PubMed Central

2003-01-01

The evaluation of quality, safety, and efficacy of medicinal products by the European Medicines Evaluation Agency (EMEA) via the centralized procedure is the only available regulatory procedure for obtaining marketing authorization for gene therapy (GT) medicinal products in the European Union. The responsibility for the authorization of clinical trials remains with the national competent authorities (NCA) acting in a harmonized framework from the scientific viewpoint. With the entry into force of a new directive on good clinical practice implementation in clinical trials as of 1 May 2004, procedural aspects will also be harmonized at EU level. Scientifically sound development of medicinal products is the key for the successful registration of dossiers and for contributing to the promotion and protection of public health. The objective of this paper is to introduce the EMEA regulatory processes and scientific activities relevant to GT medicinal products. PMID:12686717

Development and evaluation of a prototype in-flight instrument flight rules (IFR) procedures trainer

NASA Technical Reports Server (NTRS)

Aaron, J. B., Jr.; Morris, G. G.

1981-01-01

An in-flight instrument flight rules (IFR) procedures trainer capable of providing simulated indications of instrument flight in a typical general aviation aircraft independent of ground based navigation aids was developed. The IFR navaid related instruments and circuits from an ATC 610J table top simulator were installed in a Cessna 172 aircraft and connected to its electrical power and pitot static systems. The benefits expected from this hybridization concept include increased safety by reducing the number of general aviation aircraft conducting IFR training flights in congested terminal areas, and reduced fuel use and instruction costs by lessening the need to fly to and from navaid equipped airports and by increased efficiency of the required in-flight training. Technical feasibility was demonstrated and the operational feasibility of the concept was evaluated. Results indicated that the in-flight simulator is an effective training device for teaching IFR procedural skills.

Medical evaluations on the KC-135 1991 flight report summary

NASA Technical Reports Server (NTRS)

Lloyd, Charles W.

1993-01-01

The medical investigations completed on the KC-135 during FY 1991 in support of the development of the Health Maintenance Facility and Medical Operations are presented. The experiments consisted of medical and engineering evaluations of medical hardware and procedures and were conducted by medical and engineering personnel. The hardware evaluated included prototypes of a crew medical restraint system and advanced life support pack, a shuttle orbiter medical system, an airway medical accessory kit, a supplementary extended duration orbiter medical kit, and a surgical overhead canopy. The evaluations will be used to design flight hardware and identify hardware-specific training requirements. The following procedures were evaluated: transport of an ill or injured crewmember at man-tended capability, surgical technique in microgravity, transfer of liquids in microgravity, advanced cardiac life support using man-tended capability Health Maintenance Facility hardware, medical transport using a model of the assured crew return vehicle, and evaluation of delivery mechanisms for aerosolized medications in microgravity. The results of these evaluation flights allow for a better understanding of the types of procedures that can be performed in a microgravity environment.

What about the Child's Tie to the Father? A New Insight into Fathering, Father-Child Attachment, Children's Socio-Emotional Development and the Activation Relationship Theory

ERIC Educational Resources Information Center

Dumont, Caroline; Paquette, Daniel

2013-01-01

The broad aim of this study on father-child attachment was to verify whether the Risky Situation (RS) procedure is a more valid means than the Strange Situation (SS) procedure of predicting children's socio-emotional development, and to evaluate the moderator effect of day-to-day involvement on attachment and activation. Participants were 53…

Development of Procedures to Implement EOPS Cost Effectiveness Standards Model and Continued Evaluation of These Procedures by Selected Community Colleges during the 1974-75 Academic Year. EOPS Special Project 74-101.

ERIC Educational Resources Information Center

Aughinbaugh, Lorine A.; And Others

Four products were developed during the second year of the Extended Opportunity Programs and Services (EOPS) cost effectiveness study for California community colleges. This project report presents: (1) a revised cost analysis form for state-level reporting of institutional program effectiveness data and per-student costs by EOPS program category…

Automated array assembly

NASA Technical Reports Server (NTRS)

Williams, B. F.

1976-01-01

Manufacturing techniques are evaluated using expenses based on experience and studying basic cost factors for each step to evaluate expenses from a first-principles point of view. A formal cost accounting procedure is developed which is used throughout the study for cost comparisons. The first test of this procedure is a comparison of its predicted costs for array module manufacturing with costs from a study which is based on experience factors. A manufacturing cost estimate for array modules of $10/W is based on present-day manufacturing techniques, expenses, and materials costs.

Comparison of mapping algorithms used in high-throughput sequencing: application to Ion Torrent data

PubMed Central

2014-01-01

Background The rapid evolution in high-throughput sequencing (HTS) technologies has opened up new perspectives in several research fields and led to the production of large volumes of sequence data. A fundamental step in HTS data analysis is the mapping of reads onto reference sequences. Choosing a suitable mapper for a given technology and a given application is a subtle task because of the difficulty of evaluating mapping algorithms. Results In this paper, we present a benchmark procedure to compare mapping algorithms used in HTS using both real and simulated datasets and considering four evaluation criteria: computational resource and time requirements, robustness of mapping, ability to report positions for reads in repetitive regions, and ability to retrieve true genetic variation positions. To measure robustness, we introduced a new definition for a correctly mapped read taking into account not only the expected start position of the read but also the end position and the number of indels and substitutions. We developed CuReSim, a new read simulator, that is able to generate customized benchmark data for any kind of HTS technology by adjusting parameters to the error types. CuReSim and CuReSimEval, a tool to evaluate the mapping quality of the CuReSim simulated reads, are freely available. We applied our benchmark procedure to evaluate 14 mappers in the context of whole genome sequencing of small genomes with Ion Torrent data for which such a comparison has not yet been established. Conclusions A benchmark procedure to compare HTS data mappers is introduced with a new definition for the mapping correctness as well as tools to generate simulated reads and evaluate mapping quality. The application of this procedure to Ion Torrent data from the whole genome sequencing of small genomes has allowed us to validate our benchmark procedure and demonstrate that it is helpful for selecting a mapper based on the intended application, questions to be addressed, and the technology used. This benchmark procedure can be used to evaluate existing or in-development mappers as well as to optimize parameters of a chosen mapper for any application and any sequencing platform. PMID:24708189

Development, implementation and evaluation of satellite-aided agricultural monitoring systems

NASA Technical Reports Server (NTRS)

Cicone, R. C.; Crist, E. P.; Metzler, M.; Nuesch, D.

1982-01-01

Research activities in support of AgRISTARS Inventory Technology Development Project in the use of aerospace remote sensing for agricultural inventory described include: (1) corn and soybean crop spectral temporal signature characterization; (2) efficient area estimation techniques development; and (3) advanced satellite and sensor system definition. Studies include a statistical evaluation of the impact of cultural and environmental factors on crop spectral profiles, the development and evaluation of an automatic crop area estimation procedure, and the joint use of SEASAT-SAR and LANDSAT MSS for crop inventory.

Evaluation of an endoscopically assisted gastropexy technique in dogs.

PubMed

Dujowich, Mauricio; Reimer, S Brent

2008-04-01

To evaluate the use of endoscopy in conjunction with a gastropexy technique in dogs as a potential means to aid prevention of gastric dilatation-volvulus. 12 healthy adult medium- and large-breed dogs. 12 adult research dogs that had no abnormal physical examination findings each underwent an endoscopically assisted gastropexy procedure. On completion of the procedure, the dogs were euthanized and exploratory laparotomies were performed to evaluate the surgical site. Data recorded included anatomic location of the gastropexy, gastropexy length, and duration of procedure as well as any complications. Mean+/-SD gastropexy length was 3.3+/-0.25 cm, and mean duration of surgery was 18+/-7 minutes. In each dog, the stomach was located in its normal anatomic position and all gastropexies were sutured to the abdominal wall at the level of the pyloric antrum. The only complications during the procedure were needle bending and breakage at the time of stay suture placement. On the basis of these findings, it appears that endoscopically assisted gastropexy is a simple, fast, safe, and reliable method of performing a prophylactic gastropexy in dogs when undertaken by a person who is skilled in endoscopy. Such a procedure maximizes the benefits of decreased morbidity and shorter duration of anesthesia associated with minimally invasive surgery. Further clinical studies are warranted to evaluate the long-term efficacy of this procedure in dogs at risk for development of gastric dilatation-volvulus.

Simulation and Flight Test Capability for Testing Prototype Sense and Avoid System Elements

NASA Technical Reports Server (NTRS)

Howell, Charles T.; Stock, Todd M.; Verstynen, Harry A.; Wehner, Paul J.

2012-01-01

NASA Langley Research Center (LaRC) and The MITRE Corporation (MITRE) have developed, and successfully demonstrated, an integrated simulation-to-flight capability for evaluating sense and avoid (SAA) system elements. This integrated capability consists of a MITRE developed fast-time computer simulation for evaluating SAA algorithms, and a NASA LaRC surrogate unmanned aircraft system (UAS) equipped to support hardware and software in-the-loop evaluation of SAA system elements (e.g., algorithms, sensors, architecture, communications, autonomous systems), concepts, and procedures. The fast-time computer simulation subjects algorithms to simulated flight encounters/ conditions and generates a fitness report that records strengths, weaknesses, and overall performance. Reviewed algorithms (and their fitness report) are then transferred to NASA LaRC where additional (joint) airworthiness evaluations are performed on the candidate SAA system-element configurations, concepts, and/or procedures of interest; software and hardware components are integrated into the Surrogate UAS research systems; and flight safety and mission planning activities are completed. Onboard the Surrogate UAS, candidate SAA system element configurations, concepts, and/or procedures are subjected to flight evaluations and in-flight performance is monitored. The Surrogate UAS, which can be controlled remotely via generic Ground Station uplink or automatically via onboard systems, operates with a NASA Safety Pilot/Pilot in Command onboard to permit safe operations in mixed airspace with manned aircraft. An end-to-end demonstration of a typical application of the capability was performed in non-exclusionary airspace in October 2011; additional research, development, flight testing, and evaluation efforts using this integrated capability are planned throughout fiscal year 2012 and 2013.

Research on Synthetic Training: Device Evaluation and Training Program Development.

ERIC Educational Resources Information Center

Caro, Paul W.; And Others

Two studies were conducted to evaluate a fixed-wing instrument procedures training device and to develop a training program for use with it. In the first, a group of trainees who received synthetic instrument flight training with the new device were compared with a control group who did not. Men trained with the device performed more…

Computer-Managed Instruction: Development and Evaluation of Student Skill Modules to Reduce Training Time.

ERIC Educational Resources Information Center

McCombs, Barbara L.; And Others

The Computer Managed Instruction (CMI) Student Skills Project was developed and evaluated within the context of the Air Force Advanced Instructional System (AIS), with student study skill modules designed as short packages to be assigned near the beginning of any military technical training course; strategies or procedures included were expected…

Development and evaluation of an off-the-slide genotyping technique for identifying Giardia cysts and Cryptosporidium oocysts directly from US EPA Method 1623 slides

EPA Science Inventory

ABSTRACT Aims This study developed and systematically evaluated performance and limit of detection of an off-the-slide genotyping procedure for both Cryptosporidium oocysts and Giardia cysts. Methods and Results Slide standards containing flow sorted (oo)cysts were used to e...

Domain Specifications and Evaluative Criteria for Distributive Education.

ERIC Educational Resources Information Center

Weber, Larry J.; And Others

This paper attempts to provide a model that allows for individual evaluators to frame specific evaluation items based on a common set of beliefs (a philosophy) regarding the secondary school program for marketing and distributive education. It describes Popham's procedure for the development of domain specifications that frame the philosophical…

The Relationship of Teacher Evaluation Scores Generated by a Process-Product Evaluation Instrument to Selected Variables.

ERIC Educational Resources Information Center

Tadlock, James; Nesbit, Lamar

The Jackson Municipal Separate School District, Mississippi, has instituted a mixed-criteria reduction-in-force procedure emphasizing classroom performance to a greater degree than seniority, certification, and staff development participation. The district evaluation process--measuring classroom teaching performance--generated data for the present…

Classroom Factors Affecting Students: Self-Evaluation: An Interactional Model.

ERIC Educational Resources Information Center

Marshall, Hermine H.; Weinstein, Rhona S.

1984-01-01

A complex interactional model of classroom factors that contribute to the development of students' self-evaluations is presented. Factors described are: (1) task structure; (2) grouping practices; (3) feedback and evaluation procedures and information about ability; (4) motivational strategies; (5) locus of responsibility for learning; and (6) the…

Evaluating Groups for Training Parents in Child Management.

ERIC Educational Resources Information Center

Aitchison, Robert A.; Liberman, Robert Paul

The Oxnard (California) Community Mental Health Center reports on evaluation of efforts to train parents in child management skills using behavior modification techniques. Rigorous training procedures, curriculum, and evaluation techniques have been developed over the past two years. Twenty groups of 3-15 parents have received training in behavior…

Evaluation of modal pushover-based scaling of one component of ground motion: Tall buildings

USGS Publications Warehouse

Kalkan, Erol; Chopra, Anil K.

2012-01-01

Nonlinear response history analysis (RHA) is now increasingly used for performance-based seismic design of tall buildings. Required for nonlinear RHAs is a set of ground motions selected and scaled appropriately so that analysis results would be accurate (unbiased) and efficient (having relatively small dispersion). This paper evaluates accuracy and efficiency of recently developed modal pushover–based scaling (MPS) method to scale ground motions for tall buildings. The procedure presented explicitly considers structural strength and is based on the standard intensity measure (IM) of spectral acceleration in a form convenient for evaluating existing structures or proposed designs for new structures. Based on results presented for two actual buildings (19 and 52 stories, respectively), it is demonstrated that the MPS procedure provided a highly accurate estimate of the engineering demand parameters (EDPs), accompanied by significantly reduced record-to-record variability of the responses. In addition, the MPS procedure is shown to be superior to the scaling procedure specified in the ASCE/SEI 7-05 document.

Implementation and Evaluation of Weather Responsive Traffic Estimation and Prediction System

DOT National Transportation Integrated Search

2012-06-01

The objective of the project is to develop a framework and procedures for implementing and evaluating weather-responsive traffic management (WRTM) strategies using Traffic Estimation and Prediction System (TrEPS) methodologies. In a previous FHWA-fun...

Field evaluation of highway safety hardware maintenance guidelines.

DOT National Transportation Integrated Search

1987-01-01

The objective of this study was to evaluate with field tests, a procedure developed for the Federal Highway Administration for determining frequencies at which highway safety hardware needs to be inspected and repaired. The frequencies arrived at wer...

Development of electrical test procedures for qualification of spacecraft against EID. Volume 2: Review and specification of test procedures

NASA Technical Reports Server (NTRS)

Wilkenfeld, J. M.; Harlacher, B. L.; Mathews, D.

1982-01-01

A combined experimental and analytical program to develop system electrical test procedures for the qualification of spacecraft against damage produced by space-electron-induced discharges (EID) occurring on spacecraft dielectric outer surfaces is described. A review and critical evaluation of possible approaches to qualify spacecraft against space electron-induced discharges (EID) is presented. A variety of possible schemes to simulate EID electromagnetic effects produced in spacecraft was studied. These techniques form the principal element of a provisional, recommended set of test procedures for the EID qualification spacecraft. Significant gaps in our knowledge about EID which impact the final specification of an electrical test to qualify spacecraft against EID are also identified.

Test equality between two binary screening tests with a confirmatory procedure restricted on screen positives.

PubMed

Lui, Kung-Jong; Chang, Kuang-Chao

2015-01-01

In studies of screening accuracy, we may commonly encounter the data in which a confirmatory procedure is administered to only those subjects with screen positives for ethical concerns. We focus our discussion on simultaneously testing equality of sensitivity and specificity between two binary screening tests when only subjects with screen positives receive the confirmatory procedure. We develop four asymptotic test procedures and one exact test procedure. We derive sample size calculation formula for a desired power of detecting a difference at a given nominal [Formula: see text]-level. We employ Monte Carlo simulation to evaluate the performance of these test procedures and the accuracy of the sample size calculation formula developed here in a variety of situations. Finally, we use the data obtained from a study of the prostate-specific-antigen test and digital rectal examination test on 949 Black men to illustrate the practical use of these test procedures and the sample size calculation formula.

Empirical Validation of a Procedure to Correct Position and Stimulus Biases in Matching-to-Sample

ERIC Educational Resources Information Center

Kangas, Brian D.; Branch, Marc N.

2008-01-01

The development of position and stimulus biases often occurs during initial training on matching-to-sample tasks. Furthermore, without intervention, these biases can be maintained via intermittent reinforcement provided by matching-to-sample contingencies. The present study evaluated the effectiveness of a correction procedure designed to…

Innovative Approaches to Increasing the Student Assessment Procedures Effectiveness

ERIC Educational Resources Information Center

Dorozhkin, Evgenij M.; Chelyshkova, Marina B.; Malygin, Alexey A.; Toymentseva, Irina A.; Anopchenko, Tatiana Y.

2016-01-01

The relevance of the investigated problem is determined by the need to improving the evaluation procedures in education and the student assessment in the age of the context of education widening, new modes of study developing (such as blending learning, e-learning, massive open online courses), immediate feedback necessity, reliable and valid…

Evaluation of an Alcohol-Based Sanitizer Spray's Bactericidal Effects on Salmonella Inoculated onto Stainless Steel and Shell Egg Processing Equipment

USDA-ARS?s Scientific Manuscript database

Introduction: Safety regulations are being drafted for the shell egg industry. Sanitation standard operating procedures are an important precursor to HACCP regulations. Salmonella is the pathogen was most often associated with egg-borne outbreaks. Developing effective sanitation procedures that wil...

Simulating Microfracture In Metal-Matrix Composites

NASA Technical Reports Server (NTRS)

Mital, Subodh K.; Chamis, Christos C.; Gotsis, Pascal K.

1994-01-01

Computational procedures developed for simulating microfracture in metal-matrix/fiber composite materials under mechanical and/or thermal loads at ambient and high temperatures. Procedures evaluate microfracture behavior of composites, establish hierarchies and sequences of fracture modes, and examine influences of compliant layers and partial debonding on properties of composites and on initiation of microfractures in them.

Re-Evaluation of Constant versus Varied Punishers Using Empirically Derived Consequences

ERIC Educational Resources Information Center

Toole, Lisa M.; DeLeon, Iser G.; Kahng, Sung Woo; Ruffin, Geri E.; Pletcher, Carrie A.; Bowman, Lynn G.

2004-01-01

Charlop, Burgio, Iwata, and Ivancic [J. Appl. Behav. Anal. 21 (1988) 89] demonstrated that varied punishment procedures produced greater or more consistent reductions of problem behavior than a constant punishment procedure. More recently, Fisher and colleagues [Res. Dev. Disabil. 15 (1994) 133; J. Appl. Behav. Anal. 27 (1994) 447] developed a…

Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy G. Garn; Mitchell R. Greenhalgh; Jack D. Law

2013-10-01

The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbentmore » development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.« less

Novel Sorbent Development and Evaluation for the Capture of Krypton and Xenon from Nuclear Fuel Reprocessing Off-Gas Streams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Troy G. Garn; Mitchell R. Greenhalgh; Jack D. Law

2013-09-01

The release of volatile radionuclides generated during Used Nuclear Fuel reprocessing in the US will most certainly need to be controlled to meet US regulatory emission limits. A US DOE sponsored Off-Gas Sigma Team has been tasked with a multi-lab collaborative research and development effort to investigate and evaluate emissions and immobilization control technologies for the volatile radioactive species generated from commercial Used Nuclear Fuel (UNF) Reprocessing. Physical Adsorption technology is a simpler and potential economical alternative to cryogenic distillation processes that can be used for the capture of krypton and xenon and has resulted in a novel composite sorbentmore » development procedure using synthesized mordenite as the active material. Utilizing the sorbent development procedure, INL sigma team members have developed two composite sorbents that have been evaluated for krypton and xenon capacities at ambient and 191 K temperature using numerous test gas compositions. Adsorption isotherms have been generated to predict equilibration and maximum capacities enabling modeling to support process equipment scale-up.« less

The evaluation of a semi-automated procedure for classifying corn and soybeans without ground data

NASA Technical Reports Server (NTRS)

Metzler, M. D.; Cicone, R. C.; Johnson, K. I.

1982-01-01

Since the launch of Landsat 1 in 1973, research has been conducted with the objective to develop technology which would make it possible to achieve large area crop estimates on the basis of Landsat Multispectral Sensor (MSS) data without the benefit of ground observed training data. The present investigation is concerned with the evaluation of a technology which was developed to produce estimates of corn and soybean acreage in the central U.S. Corn Belt (Iowa, Illinois, and Indiana). A description of the employed technique is provided and details regarding the test of the developed technology are discussed. The obtained results show that considerable progress has been made toward creating an automatic, self-adapting procedure which has favorable bias and variance characteristics.

Designing an External Evaluation of a Large-Scale Software Development Project.

ERIC Educational Resources Information Center

Collis, Betty; Moonen, Jef

This paper describes the design and implementation of the evaluation of the POCO Project, a large-scale national software project in the Netherlands which incorporates the perspective of an evaluator throughout the entire span of the project, and uses the experiences gained from it to suggest an evaluation procedure that could be applied to other…

Identification and classification of carcinogens: procedures of the Chemical Substances Threshold Limit Value Committee, ACGIH. American Conference of Governmental Industrial Hygienists.

PubMed Central

Spirtas, R; Steinberg, M; Wands, R C; Weisburger, E K

1986-01-01

The Chemical Substances Threshold Limit Value Committee of the American Conference of Governmental Industrial Hygienists has refined its procedures for evaluating carcinogens. Types of epidemiologic and toxicologic evidence used are reviewed and a discussion is presented on how the Committee evaluates data on carcinogenicity. Although it has not been conclusively determined whether biological thresholds exist for all types of carcinogens, the Committee will continue to develop guidelines for permissible exposures to carcinogens. The Committee will continue to use the safety factor approach to setting Threshold Limit Values for carcinogens, despite its shortcomings. A compilation has been developed for lists of substances considered to be carcinogenic by several scientific groups. The Committee will use this information to help to identify and classify carcinogens for its evaluation. PMID:3752326

Identification and classification of carcinogens: procedures of the Chemical Substances Threshold Limit Value Committee, ACGIH. American Conference of Governmental Industrial Hygienists

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spirtas, R.; Steinberg, M.; Wands, R.C.

1986-10-01

The Chemical Substances Threshold Limit Value Committee of the American Conference of Governmental Industrial Hygienists has refined its procedures for evaluating carcinogens. Types of epidemiologic and toxicologic evidence used are reviewed and a discussion is presented on how the Committee evaluates data on carcinogenicity. Although it has not been conclusively determined whether biological thresholds exist for all types of carcinogens, the Committee will continue to develop guidelines for permissible exposures to carcinogens. The Committee will continue to use the safety factor approach to setting Threshold Limit Values for carcinogens, despite its shortcomings. A compilation has been developed for lists ofmore » substances considered to be carcinogenic by several scientific groups. The Committee will use this information to help to identify and classify carcinogens for its evaluation.« less

Constant Head Evaluation of Full Scale Soil Absorption Fields

NASA Astrophysics Data System (ADS)

Dix, S. P.

2001-05-01

Design loading rates for septic tank effluent in trenches of various designs with different geometry and media has been debated for decades. The role of bottom and sidewall is a hot topic with many opinion by experts in the field of agricultural and environmental engineering. Research institutions have conducted numerous studies and developed procedures for measuring both test systems and fundamental of soil hydraulics. Falling head tests have been used more recently to evaluate mature test cells and evaluate both sidewall and basal absorption, (Keys et al). The proposed paper will discuss the design and testing of a constant head permeameter. Testing this equipment and developing the test protocol followed the application of the procedure to on a number of residential systems in both sandy and clay loam soil. Results from this testing showed the relability step that must be taken to successfully use this equipment. Result of the testing show the variability and consistency of absorption, the changes in absorption when systems are flooded above their equilibrium condition and the longer-term changes that occur when trenches are rested in a warm climate. More recent application of the test procedure evaluated affects of head and increased depth sidewall on absorption rates when the effluent level in the trenches was raised. Future modification of the test equipment and procedure by integrating a data logger will permits more exact recording of dose cycles and improved estimate of soil absorption efficiency over time.

Training for percutaneous renal access on a virtual reality simulator.

PubMed

Zhang, Yi; Yu, Cheng-fan; Liu, Jin-shun; Wang, Gang; Zhu, He; Na, Yan-qun

2013-01-01

The need to develop new methods of surgical training combined with advances in computing has led to the development of virtual reality surgical simulators. The PERC Mentor(TM) is designed to train the user in percutaneous renal collecting system access puncture. This study aimed to validate the use of this kind of simulator, in percutaneous renal access training. Twenty-one urologists were enrolled as trainees to learn a fluoroscopy-guided percutaneous renal accessing technique. An assigned percutaneous renal access procedure was immediately performed on the PERC Mentor(TM) after watching instruction video and an analog operation. Objective parameters were recorded by the simulator and subjective global rating scale (GRS) score were determined. Simulation training followed and consisted of 2 hours daily training sessions for 2 consecutive days. Twenty-four hours after the training session, trainees were evaluated performing the same procedure. The post-training evaluation was compared to the evaluation of the initial attempt. During the initial attempt, none of the trainees could complete the appointed procedure due to the lack of experience in fluoroscopy-guided percutaneous renal access. After the short-term training, all trainees were able to independently complete the procedure. Of the 21 trainees, 10 had primitive experience in ultrasound-guided percutaneous nephrolithotomy. Trainees were thus categorized into the group of primitive experience and inexperience. The total operating time and amount of contrast material used were significantly lower in the group of primitive experience versus the inexperience group (P = 0.03 and 0.02, respectively). The training on the virtual reality simulator, PERC Mentor(TM), can help trainees with no previous experience of fluoroscopy-guided percutaneous renal access to complete the virtual manipulation of the procedure independently. This virtual reality simulator may become an important training and evaluation tool in teaching fluoroscopy-guided percutaneous renal access.

Concept of Operations Evaluation for Mitigating Space Flight-Relevant Medical Issues in a Planetary Habitat

NASA Technical Reports Server (NTRS)

Barsten, Kristina; Hurst, Victor, IV; Scheuring, Richard; Baumann, David K.; Johnson-Throop, Kathy

2010-01-01

Introduction: Analogue environments assist the NASA Human Research Program (HRP) in developing capabilities to mitigate high risk issues to crew health and performance for space exploration. The Habitat Demonstration Unit (HDU) is an analogue habitat used to assess space-related products for planetary missions. The Exploration Medical Capability (ExMC) element at the NASA Johnson Space Center (JSC) was tasked with developing planetary-relevant medical scenarios to evaluate the concept of operations for mitigating medical issues in such an environment. Methods: Two medical scenarios were conducted within the simulated planetary habitat with the crew executing two space flight-relevant procedures: Eye Examination with a corneal injury and Skin Laceration. Remote guidance for the crew was provided by a flight surgeon (FS) stationed at a console outside of the habitat. Audio and video data were collected to capture the communication between the crew and the FS, as well as the movements of the crew executing the procedures. Questionnaire data regarding procedure content and remote guidance performance also were collected from the crew immediately after the sessions. Results: Preliminary review of the audio, video, and questionnaire data from the two scenarios conducted within the HDU indicate that remote guidance techniques from an FS on console can help crew members within a planetary habitat mitigate planetary-relevant medical issues. The content and format of the procedures were considered concise and intuitive, respectively. Discussion: Overall, the preliminary data from the evaluation suggest that use of remote guidance techniques by a FS can help HDU crew execute space exploration-relevant medical procedures within a habitat relevant to planetary missions, however further evaluations will be needed to implement this strategy into the complete concept of operations for conducting general space medicine within similar environments

Evaluation of in-place concrete strength by core testing.

DOT National Transportation Integrated Search

2016-11-01

The overall objective of the work contained in this report is to develop an ALDOT procedure to evaluate core strength results obtained under various conditions. Since there are many factors that influence the apparent strength of cores, strength corr...

Erosion evaluation study : final report.

DOT National Transportation Integrated Search

1974-06-01

This study concerned with attempting to develop a laboratory procedure by which products can be evaluated, as quickly as possible after they appear on the market, in order to screen them so that the best ones can be further tested in the field. : Pri...

Parabolic Dish Concentrator (PDC-1)

NASA Technical Reports Server (NTRS)

Dennison, E. W.; Argoud, M. J.

1984-01-01

The design, construction, and installation of the Parabolic Dish Concentrator, Type 1 (PDC-1) has been one of the most significant JPL concentrator projects because of the knowledge gained about this type of concentrator and the development of design, testing, and analysis procedures which are applicable to all solar concentrator projects. The need for these procedures was more clearly understood during the testing period which started with the prototype panel evaluation and ended with the performance characterization of the completed concentrator. For each phase of the test program, practical test procedures were required and these procedures defined the mathematical analysis which was essential for successful concentrator development. The concentrator performance appears to be limited only by the distortions resulting from thermal gradients through the reflecting panels. Simple optical testing can be extremely effective, but comprehensive mechanical and optical analysis is essential for cost effective solar concentrator development.

Use of Key Performance Indicators to Improve Milestone Assessment in Semi-Annual Clinical Competency Committee Meetings.

PubMed

Chen, Fei; Arora, Harendra; Martinelli, Susan M

2017-01-01

The Accreditation Council for Graduate Medical Education's Next Accreditation System requires residency programs to semiannually submit composite milestone data on each resident's performance. This report describes and evaluates a new assessment review procedure piloted in our departmental Clinical Competency Committee (CCC) semi-annual meeting in June 2016. A modified Delphi technique was utilized to develop key performance indicators (KPI) linking milestone descriptors to clinical practice. In addition, the CCC identified six specific milestone sub-competencies that would be prescored with objective data prior to the meeting. Each resident was independently placed on the milestones by 3 different CCC faculty members. Milestone placement data of the same cohort of 42 residents (Clinical Anesthesia Years 1-3) were collected to calculate inter-rater reliability of the assessment procedures before and after the implemented changes. A survey was administrated to collect CCC feedback on the new procedure. The procedure assisted in reducing meeting time from 8 to 3.5 hours. Survey of the CCC members revealed positive perception of the procedure. Higher inter-rater reliability of the milestone placement was obtained using the implemented KPIs (Intraclass correlation coefficient [ICC] single measure range: before=.53-.94, after=.74-.98). We found the new assessment procedure beneficial to the efficiency and transparency of the assessment process. Further improvement of the procedure involves refinement of KPIs and additional faculty development on KPIs to allow non-CCC faculty to provide more accurate resident evaluations.

Use of Key Performance Indicators to Improve Milestone Assessment in Semi-Annual Clinical Competency Committee Meetings

PubMed Central

Arora, Harendra; Martinelli, Susan M.

2017-01-01

Background: The Accreditation Council for Graduate Medical Education's Next Accreditation System requires residency programs to semiannually submit composite milestone data on each resident's performance. This report describes and evaluates a new assessment review procedure piloted in our departmental Clinical Competency Committee (CCC) semi-annual meeting in June 2016. Methods: A modified Delphi technique was utilized to develop key performance indicators (KPI) linking milestone descriptors to clinical practice. In addition, the CCC identified six specific milestone sub-competencies that would be prescored with objective data prior to the meeting. Each resident was independently placed on the milestones by 3 different CCC faculty members. Milestone placement data of the same cohort of 42 residents (Clinical Anesthesia Years 1–3) were collected to calculate inter-rater reliability of the assessment procedures before and after the implemented changes. A survey was administrated to collect CCC feedback on the new procedure. Results: The procedure assisted in reducing meeting time from 8 to 3.5 hours. Survey of the CCC members revealed positive perception of the procedure. Higher inter-rater reliability of the milestone placement was obtained using the implemented KPIs (Intraclass correlation coefficient [ICC] single measure range: before=.53–.94, after=.74–.98). Conclusion: We found the new assessment procedure beneficial to the efficiency and transparency of the assessment process. Further improvement of the procedure involves refinement of KPIs and additional faculty development on KPIs to allow non-CCC faculty to provide more accurate resident evaluations. PMID:29766033

Chewability testing in the development of a chewable tablet for hyperphosphatemia.

PubMed

Lanz, Michael; Baldischweiler, Jan; Kriwet, Burkhard; Schill, Jutta; Stafford, John; Imanidis, Georgios

2014-12-01

The official Pharmacopeia does not include a test procedure for the in vitro estimation of the chewability of tablets and publications in the scientific literature on this subject are rare. The purpose of this study was to evaluate a number of different test procedures for assessing chewability, starting from standard breaking force and strength testing and progressing to develop new procedures that simulate the actual chewing action on tablets. A further goal was to apply these test procedures to characterize the chewability of the novel phosphate binder PA21 in comparison with a commercially available phosphate binder chewable tablet product based on lanthanum (Fosrenol®) and a chewable tablet product containing calcium (Calcimagon®) - the latter being used as a standard for its very good chewability. For this purpose, a number of development formulations (different batches of PA21) were tested. The radial or diametrical tablet breaking force offers a poor means of assessing chewability while the axial breaking force was concluded to better reflect the effect of chewing on the tablet. Measurement of tablet behavior upon repeated loading afforded the best simulation of the actual chewing action and was found to have a good discriminating power with respect to chewability of the tested tablets, especially when the tablet was moistened with artificial saliva. The developed tests are shown to be more suitable for evaluating chewing properties of tablets than currently used Pharmacopeial tests. Following ICHQ6, which calls for specification of hardness for chewable tablets, these test procedures enabled the optimal chewability features of PA21 tablets in development to be confirmed whilst still maintaining capabilities for robust production and transportation processes.

Guidelines for the Statement and Assessment of Student Competencies. Teacher Education Forum Series. Vol. 1, No. 10.

ERIC Educational Resources Information Center

Bullock, Terry; And Others

This paper, prepared by the Division of Teacher Education Evaluation Team at Indiana University, presents a set of proposed student competencies and ways to assess them. It also contains the guidelines developed by the evaluation team to help teacher education projects and programs in developing competencies and measurement procedures, as well as…

EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory

NASA Technical Reports Server (NTRS)

Jairala, Juniper C.; Durkin, Robert; Marak, Ralph J.; Sipila, Stepahnie A.; Ney, Zane A.; Parazynski, Scott E.; Thomason, Arthur H.

2012-01-01

As an early step in the preparation for future Extravehicular Activities (EVAs), astronauts perform neutral buoyancy testing to develop and verify EVA hardware and operations. Neutral buoyancy demonstrations at NASA Johnson Space Center's Sonny Carter Training Facility to date have primarily evaluated assembly and maintenance tasks associated with several elements of the International Space Station (ISS). With the retirement of the Shuttle, completion of ISS assembly, and introduction of commercial players for human transportation to space, evaluations at the Neutral Buoyancy Laboratory (NBL) will take on a new focus. Test objectives are selected for their criticality, lack of previous testing, or design changes that justify retesting. Assembly tasks investigated are performed using procedures developed by the flight hardware providers and the Mission Operations Directorate (MOD). Orbital Replacement Unit (ORU) maintenance tasks are performed using a more systematic set of procedures, EVA Concept of Operations for the International Space Station (JSC-33408), also developed by the MOD. This paper describes the requirements and process for performing a neutral buoyancy test, including typical hardware and support equipment requirements, personnel and administrative resource requirements, examples of ISS systems and operations that are evaluated, and typical operational objectives that are evaluated.

The Aristotle score: a complexity-adjusted method to evaluate surgical results.

PubMed

Lacour-Gayet, F; Clarke, D; Jacobs, J; Comas, J; Daebritz, S; Daenen, W; Gaynor, W; Hamilton, L; Jacobs, M; Maruszsewski, B; Pozzi, M; Spray, T; Stellin, G; Tchervenkov, C; Mavroudis And, C

2004-06-01

Quality control is difficult to achieve in Congenital Heart Surgery (CHS) because of the diversity of the procedures. It is particularly needed, considering the potential adverse outcomes associated with complex cases. The aim of this project was to develop a new method based on the complexity of the procedures. The Aristotle project, involving a panel of expert surgeons, started in 1999 and included 50 pediatric surgeons from 23 countries, representing the EACTS, STS, ECHSA and CHSS. The complexity was based on the procedures as defined by the STS/EACTS International Nomenclature and was undertaken in two steps: the first step was establishing the Basic Score, which adjusts only the complexity of the procedures. It is based on three factors: the potential for mortality, the potential for morbidity and the anticipated technical difficulty. A questionnaire was completed by the 50 centers. The second step was the development of the Comprehensive Aristotle Score, which further adjusts the complexity according to the specific patient characteristics. It includes two categories of complexity factors, the procedure dependent and independent factors. After considering the relationship between complexity and performance, the Aristotle Committee is proposing that: Performance = Complexity x Outcome. The Aristotle score, allows precise scoring of the complexity for 145 CHS procedures. One interesting notion coming out of this study is that complexity is a constant value for a given patient regardless of the center where he is operated. The Aristotle complexity score was further applied to 26 centers reporting to the EACTS congenital database. A new display of centers is presented based on the comparison of hospital survival to complexity and to our proposed definition of performance. A complexity-adjusted method named the Aristotle Score, based on the complexity of the surgical procedures has been developed by an international group of experts. The Aristotle score, electronically available, was introduced in the EACTS and STS databases. A validation process evaluating its predictive value is being developed.

QUANTITATIVE PROCEDURES FOR NEUROTOXICOLOGY RISK ASSESSMENT

EPA Science Inventory

In this project, previously published information on biologically based dose-response model for brain development was used to quantitatively evaluate critical neurodevelopmental processes, and to assess potential chemical impacts on early brain development. This model has been ex...

Relative value of dental procedures.

PubMed

Tuominen, R; Tuominen, M

1994-10-01

This study was conducted to develop a relative value method for dental procedures, and to evaluate the differences in values assigned by private and public sector dentists. Samples of 90 general practitioners and 120 clinical specialists were systematically drawn to represent all actively working Finnish dentists. The dentists were asked to assess the required time and know-how for performing various procedures compared to performing a two-surface amalgam filling (AF2). At the end, the dentists were asked to divide the value of 200 between time and know-how for the reference procedure (AF2). These figures were then utilized to calculate the average relative value for each procedure. Private practitioners' weighted relative values were 55.3% higher than the prices, and among public sector dentists they were 27.9% higher. Overall, know-how constituted more of the total value of the procedures than did time. Private practitioners' time assessments correlated well (r = 0.72-0.95) with the recommended prices. However, significant differences were often observed both in time and know-how assessments of individual procedures. Both time and know-how seem to be important factors when determining values for dental services. For evaluation of the value of output in the private sector, the use of prices is justified. However, when the productivity of non-profit dental offices is evaluated, a value system which is not based on market prices is needed.

[Statement: Requirements for the assessment of surgical innovations].

PubMed

Seidel, Dörthe; Pieper, Dawid; Neugebauer, Edmund

2015-01-01

The term "innovation" refers to new products, but also to the process of developing and distributing new products and procedures. The operative disciplines are often associated with innovations because of their continuous, stepwise adaptation of daily practice to established procedures. Medical devices play a significant role in integrating surgical technology with surgical experience. The success of a surgical innovation and other invasive treatments does not only depend on the surgical procedure, but also on the context of the whole treatment process including the pre- and postoperative phase, the interaction of the surgical team and the setting. High standards have been set for the assessment of surgical innovations in terms of patient safety, efficacy and patient benefit, which will be discussed in the present paper. A stepwise approach to evaluation will be used, split into preclinical development, clinical development (feasibility and safety), evaluation phase (efficacy and patient benefit) and longtime surveillance. Our paper is based on the expert-based consented IDEAL approach as well as the consented recommendations of the European Association of Endoscopic Surgery (EAES). (As supplied by publisher). Copyright © 2015. Published by Elsevier GmbH.

Report on the State of Development, Availability, Evaluation, and Future use of Test Kits for the Measurement of Lead in Paint

EPA Science Inventory

The purpose of this issue paper is to address the availability and performance characteristics of portable lead test kits especially suited for lead in paint, procedures for evaluating the performance of these test kits, and the availability of performance evaluation (PE) materia...

76 FR 58861 - Notice of Opportunity To Participate, Criteria Requirements and Application Procedure for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-22

... evaluate the conversion needs of the airport in its capital development plan to determine the appropriate... evaluate applications for redesignation primarily in terms of warranted projects fundable only under the... evaluate the need for eligible projects based upon information in the candidate airport's five-year Capital...

78 FR 72142 - Notice of Opportunity To Participate; Criteria and Application Procedures for Participation in...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-02

... evaluate the conversion needs of the airport in its capital development plan to determine the appropriate... evaluate applications for redesignation primarily in terms of warranted projects fundable only under the... designation and MAP funding. The FAA will evaluate the need for eligible projects based upon information in...

Santa Fe Community College Staff Development Programs, Policies and Procedures.

ERIC Educational Resources Information Center

Santa Fe Community Coll., NM.

This collection of materials describes various aspects of Santa Fe Community College's (SFCC's) faculty and staff development program. Part 1 explains the philosophy that underpins staff development at SFCC; the planning, programming, information dissemination, and evaluation phases of staff development; and the use of professional development…

MASTER ANALYTICAL SCHEME FOR ORGANIC COMPOUNDS IN WATER: PART 1. PROTOCOLS

EPA Science Inventory

A Master Analytical Scheme (MAS) has been developed for the analysis of volatile (gas chromatographable) organic compounds in water. In developing the MAS, it was necessary to evaluate and modify existing analysis procedures and develop new techniques to produce protocols that pr...

THE TREATMENT OF DISRUPTIVE CLASSROOM BEHAVIOR PROBLEMS BY EMPLOYMENT OF A PARTIAL-MILIEU CONSISTENCY PROGRAM. FINAL REPORT.

ERIC Educational Resources Information Center

COLLINS, RONALD C.

THIS STUDY ATTEMPTED TO DEVELOP AND EVALUATE A TREATMENT PROCEDURE DESIGNED TO REDUCE THE INCIDENCE OF MALADAPTIVE BEHAVIORS IN PUBLIC SCHOOL CLASSROOMS. THE TREATMENT PROCEDURE ATTEMPTED TO PROVIDE ENVIRONMENTAL CONSISTENCY IN THE CHILD'S ENVIRONMENT. IT WAS HYPOTHESIZED THAT GIVEN A PROGRAM OF HOME-SCHOOL CONSISTENCY, UNYIELDING FOR COMPLIANCE…

Products of combustion of non-metallic materials

NASA Technical Reports Server (NTRS)

Perry, Cortes L.

1995-01-01

The objective of this project is to evaluate methodologies for the qualitative and quantitative determination of the gaseous products of combustion of non-metallic materials of interest to the aerospace community. The goal is to develop instrumentation and analysis procedures which qualitatively and quantitatively identify gaseous products evolved by thermal decomposition and provide NASA a detailed system operating procedure.

Evaluation of Georgia asphalt mixture properties using a Hamburg wheel-tracking device.

DOT National Transportation Integrated Search

2017-05-01

This study used a Hamburg Wheel-Tracking Device (HWTD) to evaluate the resistance of Georgia asphalt mixtures to rutting and stripping. It aimed to develop an HWTD test procedure and criteria aligned with GDOTs asphalt materials and mixture design...

Administrator Evaluation--Planning and Process.

ERIC Educational Resources Information Center

Sweeney, Jim

1981-01-01

Discusses five tasks basic to effective administrator evaluation: development of district philosophy; identification of activities crucial to school success; determination of operational procedures; utilization of forms and records which reflect district philosophy; and examination of the components of the system during a trial period. (JD)

Development of the MASW method for pavement evaluation.

DOT National Transportation Integrated Search

2016-07-31

The purpose of this research is to establish a recommended procedure for performing multichannel analysis of surface waves (MASW) on pavements as well as evaluating the ability of MASW to detect a change in shear wave velocity as damage in concrete i...

Documentation for a Structural Optimization Procedure Developed Using the Engineering Analysis Language (EAL)

NASA Technical Reports Server (NTRS)

Martin, Carl J., Jr.

1996-01-01

This report describes a structural optimization procedure developed for use with the Engineering Analysis Language (EAL) finite element analysis system. The procedure is written primarily in the EAL command language. Three external processors which are written in FORTRAN generate equivalent stiffnesses and evaluate stress and local buckling constraints for the sections. Several built-up structural sections were coded into the design procedures. These structural sections were selected for use in aircraft design, but are suitable for other applications. Sensitivity calculations use the semi-analytic method, and an extensive effort has been made to increase the execution speed and reduce the storage requirements. There is also an approximate sensitivity update method included which can significantly reduce computational time. The optimization is performed by an implementation of the MINOS V5.4 linear programming routine in a sequential liner programming procedure.

48 CFR 45.202 - Evaluation procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Evaluation procedures. 45... MANAGEMENT GOVERNMENT PROPERTY Solicitation and Evaluation Procedures 45.202 Evaluation procedures. (a) The... evaluation purposes only, a rental equivalent evaluation factor. (b) The contracting officer shall ensure the...

The association between restorative pre-clinical activities and musculoskeletal disorders.

PubMed

Corrocher, P A; Presoto, C D; Campos, J A D B; Garcia, P P N S

2014-08-01

To evaluate the risk of development of musculoskeletal disorders in the upper limbs of undergraduate dentistry students during the execution of pre-clinical laboratory activities based on gender, type of dental procedure and area of the mouth under treatment. Male and female undergraduate students in the second year of the Araraquara Dental School, UNESP, were enrolled in this study. Digital photographs were obtained whilst the subjects performed laboratory activities. The working postures adopted by each student were evaluated using the Rapid Upper Limb Assessment (RULA). The photos were analysed by a calibrated researcher (k = 0.89), and a final risk score was attributed to each analysed procedure (n = 354). Descriptive statistical analyses were performed, and the associations of interest were analysed by the chi-square test (P = 0.05). During most of the laboratory procedures performed, the risk of developing musculoskeletal disorders was high (64.7%; - IC95% : 59.7-69.7%), with no significant association between the RULA final score and gender (χ(2)  = 1.100; P = 0.577), type of dental procedure (χ(2)  = 5.447, P = 0.244) and mouth area treated (χ(2) =4.150; P = 0.126). The risk of developing musculoskeletal disorders was high in undergraduate dentistry students; this risk was not related to gender, type of dental procedure and region of the mouth being treated. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Runway Rubber Removal Specification Development: Field Evaluation Procedures Development.

DTIC Science & Technology

1984-07-01

removal was sufficient enough to restore full pave- ment skid resistance (based on tests with a DBV). With regard to high-pressure water rubber ...over a test surface, the rubber slider resists motion-. The force, parallel to the test surface, which acts on the slider registers an output on a dial...PROCEDURE 1. Check rubber shoe for wear . Replace when the edge is worn by more than 3/16 in as measured with a rule laid flat across the slider width. 2

Alternator insulation evaluation tests

NASA Technical Reports Server (NTRS)

Penn, W. B.; Schaefer, R. F.; Balke, R. L.

1972-01-01

Tests were conducted to predict the remaining electrical insulation life of a 60 KW homopolar inductor alternator following completion of NASA turbo-alternator endurance tests for SNAP-8 space electrical power systems application. The insulation quality was established for two alternators following completion of these tests. A step-temperature aging test procedure was developed for insulation life prediction and applied to one of the two alternators. Armature winding insulation life of over 80,000 hours for an average winding temperature of 248 degrees C was predicted using the developed procedure.

Vibro-acoustics for Space Station applications

NASA Technical Reports Server (NTRS)

Vaicaitis, R.; Bofilios, D. A.

1986-01-01

An analytical procedure has been developed to study noise generation in a double wall and single wall cylindrical shell due to mechanical point loads. The objective of this study is to develop theoretical procedures for parametetric evaluation of noise generation andd noise transmission for the habitability modules of the proposed Space Station operation. The solutions of the governing acoustic-structural equations are obtained utilizing modal decomposition. The numerical results include modal frequencies, deflection response spectral densities and interior noise sound pressure levels.

Validity, reliability and support for implementation of independence-scaled procedural assessment in laparoscopic surgery.

PubMed

Kramp, Kelvin H; van Det, Marc J; Veeger, Nic J G M; Pierie, Jean-Pierre E N

2016-06-01

There is no widely used method to evaluate procedure-specific laparoscopic skills. The first aim of this study was to develop a procedure-based assessment method. The second aim was to compare its validity, reliability and feasibility with currently available global rating scales (GRSs). An independence-scaled procedural assessment was created by linking the procedural key steps of the laparoscopic cholecystectomy to an independence scale. Subtitled and blinded videos of a novice, an intermediate and an almost competent trainee, were evaluated with GRSs (OSATS and GOALS) and the independence-scaled procedural assessment by seven surgeons, three senior trainees and six scrub nurses. Participants received a short introduction to the GRSs and independence-scaled procedural assessment before assessment. The validity was estimated with the Friedman and Wilcoxon test and the reliability with the intra-class correlation coefficient (ICC). A questionnaire was used to evaluate user opinion. Independence-scaled procedural assessment and GRS scores improved significantly with surgical experience (OSATS p = 0.001, GOALS p < 0.001, independence-scaled procedural assessment p < 0.001). The ICCs of the OSATS, GOALS and independence-scaled procedural assessment were 0.78, 0.74 and 0.84, respectively, among surgeons. The ICCs increased when the ratings of scrub nurses were added to those of the surgeons. The independence-scaled procedural assessment was not considered more of an administrative burden than the GRSs (p = 0.692). A procedural assessment created by combining procedural key steps to an independence scale is a valid, reliable and acceptable assessment instrument in surgery. In contrast to the GRSs, the reliability of the independence-scaled procedural assessment exceeded the threshold of 0.8, indicating that it can also be used for summative assessment. It furthermore seems that scrub nurses can assess the operative competence of surgical trainees.

Electronic depiction of Instrument Approach Procedure (IAP) charts phase 1: development and evaluation

DOT National Transportation Integrated Search

1995-05-01

This report describes the research program being conducted at the Volpe National Transportation Systems Center on the development of electronic aeronautical charts. The design of electronic aeronautical navigation charts raises many interrelated huma...

Production Plan and Formative Evaluation Report.

ERIC Educational Resources Information Center

Castle, Thomas J.; And Others

1981-01-01

Instructional development projects in Medical Terminology and Orientation to Hearing Aids are reviewed to demonstrate the procedural steps used and the interactive dynamics employed by development teams at the National Technical Institute for the Deaf. Six references are provided. (MER)

Evaluation of the clinical benefit of an electromagnetic navigation system for CT-guided interventional radiology procedures in the thoraco-abdominal region compared with conventional CT guidance (CTNAV II): study protocol for a randomised controlled trial.

PubMed

Rouchy, R C; Moreau-Gaudry, A; Chipon, E; Aubry, S; Pazart, L; Lapuyade, B; Durand, M; Hajjam, M; Pottier, S; Renard, B; Logier, R; Orry, X; Cherifi, A; Quehen, E; Kervio, G; Favelle, O; Patat, F; De Kerviler, E; Hughes, C; Medici, M; Ghelfi, J; Mounier, A; Bricault, I

2017-07-06

Interventional radiology includes a range of minimally invasive image-guided diagnostic and therapeutic procedures that have become routine clinical practice. Each procedure involves a percutaneous needle insertion, often guided using computed tomography (CT) because of its availability and usability. However, procedures remain complicated, in particular when an obstacle must be avoided, meaning that an oblique trajectory is required. Navigation systems track the operator's instruments, meaning the position and progression of the instruments are visualised in real time on the patient's images. A novel electromagnetic navigation system for CT-guided interventional procedures (IMACTIS-CT®) has been developed, and a previous clinical trial demonstrated improved needle placement accuracy in navigation-assisted procedures. In the present trial, we are evaluating the clinical benefit of the navigation system during the needle insertion step of CT-guided procedures in the thoraco-abdominal region. This study is designed as an open, multicentre, prospective, randomised, controlled interventional clinical trial and is structured as a standard two-arm, parallel-design, individually randomised trial. A maximum of 500 patients will be enrolled. In the experimental arm (navigation system), the procedures are carried out using navigation assistance, and in the active comparator arm (CT), the procedures are carried out with conventional CT guidance. The randomisation is stratified by centre and by the expected difficulty of the procedure. The primary outcome of the trial is a combined criterion to assess the safety (number of serious adverse events), efficacy (number of targets reached) and performance (number of control scans acquired) of navigation-assisted, CT-guided procedures as evaluated by a blinded radiologist and confirmed by an expert committee in case of discordance. The secondary outcomes are (1) the duration of the procedure, (2) the satisfaction of the operator and (3) the irradiation dose delivered, with (4) subgroup analysis according to the expected difficulty of the procedure, as well as an evaluation of (5) the usability of the device. This trial addresses the lack of published high-level evidence studies in which navigation-assisted CT-guided interventional procedures are evaluated. This trial is important because it addresses the problems associated with conventional CT guidance and is particularly relevant because the number of interventional radiology procedures carried out in routine clinical practice is increasing. ClinicalTrials.gov identifier: NCT01896219 . Registered on 5 July 2013.

ASCCP Colposcopy Standards: How Do We Perform Colposcopy? Implications for Establishing Standards.

PubMed

Waxman, Alan G; Conageski, Christine; Silver, Michelle I; Tedeschi, Candice; Stier, Elizabeth A; Apgar, Barbara; Huh, Warner K; Wentzensen, Nicolas; Massad, L Stewart; Khan, Michelle J; Mayeaux, Edward J; Einstein, Mark H; Schiffman, Mark H; Guido, Richard S

2017-10-01

The American Society for Colposcopy and Cervical Pathology (ASCCP) Colposcopy Standards recommendations address the role of and approach to colposcopy and biopsy for cervical cancer prevention in the United States. The recommendations were developed by an expert working group appointed by ASCCP's Board of Directors. Working group 3 defined colposcopy procedure guidelines for minimum and comprehensive colposcopy practice and evaluated the use of colposcopy adjuncts. The working group performed a systematic literature review to identify best practices in colposcopy methodology and to evaluate the use of available colposcopy adjuncts. The literature provided little evidence to support specific elements of the procedure. The working group, therefore, implemented a national survey of current and recent ASCCP members to evaluate common elements of the colposcopy examination. The findings of this survey were modified by expert consensus from the ASCCP Colposcopy Standards Committee members to create guidelines for performing colposcopy. The draft recommendations were posted online for public comment and presented at an open session of the International Federation for Cervical Pathology and Colposcopy 2017 World Congress for further comment. All comments were considered in the development of final recommendations. Minimum and comprehensive colposcopy practice guidelines were developed. These guidelines represent recommended practice in all parts of the examination including the following: precolposcopy evaluation, performing the procedure, documentation of findings, biopsy practice, and postprocedure follow-up. These guidelines are intended to serve as a guide to standardize colposcopy across the United States.

Evaluation of low-cost commercial-off-the-shelf autopilot systems for SUAS operations

NASA Astrophysics Data System (ADS)

Brown, Calvin Thomas

With this increase in unmanned aircraft system (UAS) operations, there is a need for a structured process to evaluate different commercially available systems, particularly autopilots. The Remotely Operated Aircraft Management, Interpretation, and Navigation from Ground or ROAMING scale was developed to meet this need. This scale is a modification of the widely accepted Handling Qualities Rating scale developed by George Cooper and Robert Harper Jr. The Cooper-Harper scale allows pilots to rate a vehicle's performance in completing some task. Similarly, the ROAMING scale allows UAS operators to evaluate the management and observability of UAS in completing some task. The standardized evaluative process consists of cost, size, weight, and power (SWAP) analysis, ease of implementation through procedural description of setup, ROAMING scale rating, a slightly modified NASA TLX rating, and comparison of manual operation to autonomous operation of the task. This standard for evaluation of autopilots and their software will lead to better understanding of the workload placed on UAS operators and indicate where improvements to design and operational procedures can be made. An assortment of low-cost commercial-off-the-shelf (COTS) autopilots were selected for use in the development of the evaluation and results of these tests demonstrate the commonalities and differences in these systems.

New procedures to evaluate visually lossless compression for display systems

NASA Astrophysics Data System (ADS)

Stolitzka, Dale F.; Schelkens, Peter; Bruylants, Tim

2017-09-01

Visually lossless image coding in isochronous display streaming or plesiochronous networks reduces link complexity and power consumption and increases available link bandwidth. A new set of codecs developed within the last four years promise a new level of coding quality, but require new techniques that are sufficiently sensitive to the small artifacts or color variations induced by this new breed of codecs. This paper begins with a summary of the new ISO/IEC 29170-2, a procedure for evaluation of lossless coding and reports the new work by JPEG to extend the procedure in two important ways, for HDR content and for evaluating the differences between still images, panning images and image sequences. ISO/IEC 29170-2 relies on processing test images through a well-defined process chain for subjective, forced-choice psychophysical experiments. The procedure sets an acceptable quality level equal to one just noticeable difference. Traditional image and video coding evaluation techniques, such as, those used for television evaluation have not proven sufficiently sensitive to the small artifacts that may be induced by this breed of codecs. In 2015, JPEG received new requirements to expand evaluation of visually lossless coding for high dynamic range images, slowly moving images, i.e., panning, and image sequences. These requirements are the basis for new amendments of the ISO/IEC 29170-2 procedures described in this paper. These amendments promise to be highly useful for the new content in television and cinema mezzanine networks. The amendments passed the final ballot in April 2017 and are on track to be published in 2018.

A case of central retinal artery occlusion following embolization procedure for juvenile nasopharyngeal angiofibroma

PubMed Central

Ramezani, Alireza; Haghighatkhah, Hamidreza; Moghadasi, Habibollah; Taheri, Morteza S; Parsafar, Hiva

2010-01-01

A 23-year-old male patient with right nasal Juvenile Nasopharyngeal Angiofibroma (JNA) developed Central Retinal Artery Occlusion (CRAO) during embolization of the tumor using polyvinyl alcohol particles before endoscopic excision. Classic CRAO management was initiated by an ophthalmologist after 12 h. Retrospective evaluation of the angiograms revealed a tiny communication between the external carotid and ophthalmic arteries which had not been noticed before embolization. During endoscopic excision, the tumor was found to originate extraordinarily from midline structures. It was concluded that CRAO might be a rare complication of JNA embolization. Careful preoperative angiographic evaluations to detect communicating arteries and immediate ophthalmologic consultation in case of developing visual symptoms during the procedure are necessary. PMID:20689199

Westinghouse corporate development of a decision software program for Radiological Evaluation Decision Input (REDI)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bush, T.S.

1995-03-01

In December 1992, the Department of Energy (DOE) implemented the DOE Radiological Control Manual (RCM). Westinghouse Idaho Nuclear Company, Inc. (WINCO) submitted an implementation plan showing how compliance with the manual would be achieved. This implementation plan was approved by DOE in November 1992. Although WINCO had already been working under a similar Westinghouse RCM, the DOE RCM brought some new and challenging requirements. One such requirement was that of having procedure writers and job planners create the radiological input in work control procedures. Until this time, that information was being provided by radiological engineering or a radiation safety representative.more » As a result of this requirement, Westinghouse developed the Radiological Evaluation Decision Input (REDI) program.« less

MASTER ANALYTICAL SCHEME FOR ORGANIC COMPOUNDS IN WATER. PART 2. APPENDICES TO PROTOCOLS

EPA Science Inventory

A Master Analytical Scheme (MAS) has been developed for the analysis of volatile (gas chromatographable) organic compounds in water. In developing the MAS, it was necessary to evaluate and modify existing analysis procedures and develop new techniques to produce protocols that pr...

State Guidelines for School Athletic Programs.

ERIC Educational Resources Information Center

California State Dept. of Education, Sacramento.

The guidelines presented here are designed to assist school personnel in developing, administering, and evaluating school athletic programs in California. Topics include: (1) the basic philosophy for school athletic programs; (2) procedures for evaluating school athletic programs; (3) the three-phase school athletic program; (4) resources to…

75 FR 14449 - Statement of Organization, Functions, and Delegations of Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-25

... and procedures, and provides direction, planning and evaluation for information technology systems and... development, monitoring and evaluation of public health capabilities, plans, infrastructure and systems to... and maintains a real-time management information system to monitor projects funded by the State and...

Surgeon-tool force/torque signatures--evaluation of surgical skills in minimally invasive surgery.

PubMed

Rosen, J; MacFarlane, M; Richards, C; Hannaford, B; Sinanan, M

1999-01-01

The best method of training for laparoscopic surgical skills is controversial. Some advocate observation in the operating room, while others promote animal and simulated models or a combination of surgical related tasks. The mode of proficiency evaluation common to all of these methods has been subjective evaluation by a skilled surgeon. In order to define an objective means of evaluating performance, an instrumented laparoscopic grasper was developed measuring the force/torque at the surgeon hand/tool interface. The measured database demonstrated substantial differences between experienced and novice surgeon groups. Analyzing forces and torques combined with the state transition during surgical procedures allows an objective measurement of skill in MIS. Teaching the novice surgeon to limit excessive loads and improve movement efficiency during surgical procedures can potentially result in less injury to soft tissues and less wasted time during laparoscopic surgery. Moreover the force/torque database measured in this study may be used for developing realistic virtual reality simulators and optimization of medical robots performance.

CT and MRI slice separation evaluation by LabView developed software.

PubMed

Acri, Giuseppe; Testagrossa, Barbara; Sestito, Angela; Bonanno, Lilla; Vermiglio, Giuseppe

2018-02-01

The efficient use of Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) equipment necessitates establishing adequate quality-control (QC) procedures. In particular, the accuracy of slice separation, during multislices acquisition, requires scan exploration of phantoms containing test objects. To simplify such procedures, a novel phantom and a computerised LabView-based procedure have been devised, enabling determination the midpoint of full width at half maximum (FWHM) in real time while the distance from the profile midpoint of two progressive images is evaluated and measured. The results were compared with those obtained by processing the same phantom images with commercial software. To validate the proposed methodology the Fisher test was conducted on the resulting data sets. In all cases, there was no statistically significant variation between the commercial procedure and the LabView one, which can be used on any CT and MRI diagnostic devices. Copyright © 2017. Published by Elsevier GmbH.

Iterating between lessons on concepts and procedures can improve mathematics knowledge.

PubMed

Rittle-Johnson, Bethany; Koedinger, Kenneth

2009-09-01

Knowledge of concepts and procedures seems to develop in an iterative fashion, with increases in one type of knowledge leading to increases in the other type of knowledge. This suggests that iterating between lessons on concepts and procedures may improve learning. The purpose of the current study was to evaluate the instructional benefits of an iterative lesson sequence compared to a concepts-before-procedures sequence for students learning decimal place-value concepts and arithmetic procedures. In two classroom experiments, sixth-grade students from two schools participated (N=77 and 26). Students completed six decimal lessons on an intelligent-tutoring systems. In the iterative condition, lessons cycled between concept and procedure lessons. In the concepts-first condition, all concept lessons were presented before introducing the procedure lessons. In both experiments, students in the iterative condition gained more knowledge of arithmetic procedures, including ability to transfer the procedures to problems with novel features. Knowledge of concepts was fairly comparable across conditions. Finally, pre-test knowledge of one type predicted gains in knowledge of the other type across experiments. An iterative sequencing of lessons seems to facilitate learning and transfer, particularly of mathematical procedures. The findings support an iterative perspective for the development of knowledge of concepts and procedures.

Evaluative methodology for comprehensive water quality management planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dyer, H. L.

Computer-based evaluative methodologies have been developed to provide for the analysis of coupled phenomena associated with natural resource comprehensive planning requirements. Provisions for planner/computer interaction have been included. Each of the simulation models developed is described in terms of its coded procedures. An application of the models for water quality management planning is presented; and the data requirements for each of the models are noted.

Habitat Suitability Index Models: Black-shouldered kite

USGS Publications Warehouse

Faanes, Craig A.; Howard, Rebecca J.

1987-01-01

A review and synthesis of existing information were used to develop a model for evaluating black-shouldered kite habitat quality. The model is scaled to produce an index between 0 (unsuitable habitat) to 1.0 (optimal habitat). Habitat suitability index models are designed for use with the Habitat Evaluation Procedures previously developed by the U.S. Fish and Wildlife Service. Guidelines for model application are provided.

A correction procedure for thermally two-way coupled point-particles

NASA Astrophysics Data System (ADS)

Horwitz, Jeremy; Ganguli, Swetava; Mani, Ali; Lele, Sanjiva

2017-11-01

Development of a robust procedure for the simulation of two-way coupled particle-laden flows remains a challenge. Such systems are characterized by O(1) or greater mass of particles relative to the fluid. The coupling of fluid and particle motion via a drag model means the undisturbed fluid velocity evaluated at the particle location (which is needed in the drag model) is no longer equal to the interpolated fluid velocity at the particle location. The same issue arises in problems of dispersed flows in the presence of heat transfer. The heat transfer rate to each particle depends on the difference between the particle's temperature and the undisturbed fluid temperature. We borrow ideas from the correction scheme we have developed for particle-fluid momentum coupling by developing a procedure to estimate the undisturbed fluid temperature given the disturbed temperature field created by a point-particle. The procedure is verified for the case of a particle settling under gravity and subject to radiation. The procedure is developed in the low Peclet, low Boussinesq number limit, but we will discuss the applicability of the same correction procedure outside of this regime when augmented by appropriate drag and heat exchange correlations. Supported by DOE, J. H. Supported by NSF GRF

A computer program incorporating fatigue and fracture criteria in the preliminary design of transport aircraft: An evaluation

NASA Technical Reports Server (NTRS)

Berger, P. E.; Thornton, E. A.

1976-01-01

The APAS program a multistation structural synthesis procedure developed to evaluate material, geometry, and configuration with various design criteria usually considered for the primary structure of transport aircraft is described and evaluated. Recommendations to improve accuracy and extend the capabilities of the APAS program are given. Flow diagrams are included.

Teacher Performance Evaluation Plan: A Personalized Approach to Supervision, Staff Development, and Evaluation. An Implementation Guide. Revised Edition.

ERIC Educational Resources Information Center

Knight, Jeanne; And Others

This guide provides assistance to New Mexico school districts in implementing a state-sponsored teacher performance evaluation plan (Provision III of the New Mexico Staff Accountability Plan, adopted by the State Board of Education). This plan involves five basic procedures: (1) determine specific definitions of the six essential teaching…

Applying a Mixed Method Design to Evaluate Training Seminars within an Early Childhood Education Project

ERIC Educational Resources Information Center

Grammatikopoulos, Vasilis; Zachopoulou, Evridiki; Tsangaridou, Niki; Liukkonen, Jarmo; Pickup, Ian

2008-01-01

The body of research relating to assessment in education suggests that professional developers and seminar administrators have generally paid little attention to evaluation procedures. Scholars have also been critical of evaluations which use a single data source and have favoured the use of a multiple method design to generate a complete picture…

Classroom Teacher's Performance-Based Evaluation Form (CTPBEF) for Public Education Schools in the State of Kuwait: A Framework

ERIC Educational Resources Information Center

Al-Shammari, Zaid; Yawkey, Thomas D.

2008-01-01

This investigation using Grounded Theory focuses on developing, designing and testing out an evaluation method used as a framework for this study. This framework evolved into the instrument entitled, "Classroom Teacher's Performance Based Evaluation Form (CTPBEF)". This study shows the processes and procedures used in CTPBEF's…

Application of GIS-based Procedure on Slopeland Use Classification and Identification

NASA Astrophysics Data System (ADS)

KU, L. C.; LI, M. C.

2016-12-01

In Taiwan, the "Slopeland Conservation and Utilization Act" regulates the management of the slopelands. It categorizes the slopeland into land suitable for agricultural or animal husbandry, land suitable for forestry and land for enhanced conservation, according to the environmental factors of average slope, effective soil depth, soil erosion and parental rock. Traditionally, investigations of environmental factors require cost-effective field works. It has been confronted with many practical issues such as non-evaluated cadastral parcels, evaluation results depending on expert's opinion, difficulties in field measurement and judgment, and time consuming. This study aimed to develop a GIS-based procedure involved in the acceleration of slopeland use classification and quality improvement. First, the environmental factors of slopelands were analyzed by GIS and SPSS software. The analysis involved with the digital elevation model (DEM), soil depth map, land use map and satellite images. Second, 5% of the analyzed slopelands were selected to perform the site investigations and correct the results of classification. Finally, a 2nd examination was involved by randomly selected 2% of the analyzed slopelands to perform the accuracy evaluation. It was showed the developed procedure is effective in slopeland use classification and identification. Keywords: Slopeland Use Classification, GIS, Management

Assessment of the NASA Flight Assurance Review Program

NASA Technical Reports Server (NTRS)

Holmes, J.; Pruitt, G.

1983-01-01

The NASA flight assurance review program to develop minimum standard guidelines for flight assurance reviews was assessed. Documents from NASA centers and NASA headquarters to determine current design review practices and procedures were evaluated. Six reviews were identified for the recommended minimum. The practices and procedures used at the different centers to incorporate the most effective ones into the minimum standard review guidelines were analyzed and guidelines for procedures, personnel and responsibilies, review items/data checklist, and feedback and closeout were defined. The six recommended reviews and the minimum standards guidelines developed for flight assurance reviews are presented. Observations and conclusions for further improving the NASA review and quality assurance process are outlined.

Determination of brace forces caused by construction loads and wind loads during bridge construction.

DOT National Transportation Integrated Search

2014-04-01

The first objective of this study was to develop procedures for determining bracing forces during bridge construction. : Numerical finite element models and analysis techniques were developed for evaluating brace forces induced by construction loads ...

Design, Development and Evaluation of Collaborative Team Training Method in Virtual Worlds for Time-Critical Medical Procedures

ERIC Educational Resources Information Center

Khanal, Prabal

2014-01-01

Medical students acquire and enhance their clinical skills using various available techniques and resources. As the health care profession has move towards team-based practice, students and trainees need to practice team-based procedures that involve timely management of clinical tasks and adequate communication with other members of the team.…

Evaluating projects for improving fish and wildlife habitat on National Forests.

Treesearch

Fred H. Everest; Daniel R. Talhelm

1982-01-01

Recent legislation (PL. 93-452; P.L. 94-588) has emphasized improvement of fish and wildlife habitat on lands of the National Forest System. A sequential procedure has been developed for screening potential projects to identify those producing the greatest fishery benefits. The procedure—which includes program planning, project planning, and intensive benefit/cost...

Software For Computer-Aided Design Of Control Systems

NASA Technical Reports Server (NTRS)

Wette, Matthew

1994-01-01

Computer Aided Engineering System (CAESY) software developed to provide means to evaluate methods for dealing with users' needs in computer-aided design of control systems. Interpreter program for performing engineering calculations. Incorporates features of both Ada and MATLAB. Designed to be flexible and powerful. Includes internally defined functions, procedures and provides for definition of functions and procedures by user. Written in C language.

Development of a candidate reference measurement procedure for the analysis of cortisol in human serum samples by isotope dilution-gas chromatography-mass spectrometry.

PubMed

Kawaguchi, Migaku; Takatsu, Akiko

2009-08-01

A candidate reference measurement procedure involving isotope dilution coupled with gas chromatography-mass spectrometry (GC-MS) has been developed and critically evaluated. An isotopically labeled internal standard, cortisol-d(2), was added to a serum sample. After equilibration, solid-phase extractions (SPE) for sample preparation and derivatization with heptafluorobutyric anhydride (HFBA) were performed for GC-MS analysis. The limit of detection (LOD) and the limit of quantification (LOQ) were 5 and 20 ng g(-1), respectively. The recovery of the added cortisol ranged from 99.8 to 101.0%. Excellent precision was obtained with a within-day variation (RSD) of 0.7% for GC-MS analysis. The accuracy of the measurement was evaluated by comparing of results of this reference measurement procedure on lyophilized human serum reference materials for cortisol (European Reference Materials (ERM)-DA 192) as Certified Reference Materials (CRMs). The results of this method for total cortisol agreed with the certified values within some uncertainty. This method, which demonstrates simply, easy, good accuracy, high precision, and is free from interferences from structural analogues, qualifies as a reference measurement procedure.

Engineering properties of resin modified pavement (RMP) for mechanistic design

NASA Astrophysics Data System (ADS)

Anderton, Gary Lee

1997-11-01

The research study described in this report focuses on determining the engineering properties of the resin modified pavement (RMP) material relating to pavement performance, and then developing a rational mechanistic design procedure to replace the current empirical design procedure. A detailed description of RMP is provided, including a review of the available literature on this relatively new pavement technology. Field evaluations of four existing and two new RMP project sites were made to assess critical failure modes and to obtain pavement samples for subsequent laboratory testing. Various engineering properties of laboratory-produced and field-recovered samples of RMP were measured and analyzed. The engineering properties evaluated included those relating to the material's stiffness, strength, thermal properties, and traffic-related properties. Comparisons of these data to typical values for asphalt concrete and portland cement concrete were made to relate the physical nature of RMP to more common pavement surfacing materials. A mechanistic design procedure was developed to determine appropriate thickness profiles of RMP, using stiffness and fatigue properties determined by this study. The design procedure is based on the U.S. Army Corps of Engineers layered elastic method for airfield flexible pavements. The WESPAVE computer program was used to demonstrate the new design procedure for a hypothetical airfield apron design. The results of the study indicated that RMP is a relatively stiff, viscoelastic pavement surfacing material with many of its strength and stiffness properties falling between those of typical asphalt concrete and portland cement concrete. The RMP's thermal and traffic-related properties indicated favorable field performance. The layered elastic design approach appeared to be a reasonable and practical method for RMP mechanistic pavement design, and this design procedure was recommended for future use and development.

Comprehensive evaluation of lung allograft function in infants after lung and heart-lung transplantation.

PubMed

Hayes, Don; Naguib, Aymen; Kirkby, Stephen; Galantowicz, Mark; McConnell, Patrick I; Baker, Peter B; Kopp, Benjamin T; Lloyd, Eric A; Astor, Todd L

2014-05-01

Limited data exist on methods to evaluate allograft function in infant recipients of lung and heart-lung transplants. At our institution, we developed a procedural protocol in coordination with pediatric anesthesia where infants were sedated to perform infant pulmonary function testing, computed tomography imaging of the chest, and flexible fiberoptic bronchoscopy with transbronchial biopsies. A retrospective review was performed of children aged younger than 1 year who underwent lung or heart-lung transplantation at our institution to assess the effect of this procedural protocol in the evaluation of infant lung allografts. Since 2005, 5 infants have undergone thoracic transplantation (3 heart-lung, 2 lung). At time of transplant, the mean ± standard deviation age was 7.2 ± 2.8 months (range, 3-11 months). Of 24 procedural sessions performed to evaluate lung allografts, 83% (20 of 24) were considered surveillance where the patients were completely asymptomatic. Of the surveillance procedures, 80% were performed as an outpatient, whereas 20% were done as inpatients during the lung or heart-lung transplant post-operative period before discharge home. Sedation was performed with propofol alone (23 of 24) or in addition to ketamine (1 of 24) infusion; mean sedation time was 141 ± 39 minutes (range, 70-214) minutes. Of the 16 outpatient procedures, patients were discharged after 14 (88%) on the same day, and after 2 (12%) were admitted for observation, with 1 being due to transportation issues and the other due to fever during the observation period. A comprehensive procedural protocol to evaluate allograft function in infant lung and heart-lung transplant recipients was performed safely as an outpatient. Copyright © 2014 International Society for Heart and Lung Transplantation. Published by Elsevier Inc. All rights reserved.

Total Performance Development Systems: Blueprints for Building and Sustaining Organizational Excellence

ERIC Educational Resources Information Center

Schanie, Charles F.; Kemper, James E.

2008-01-01

Most "performance evaluation" or "performance development" programs in higher education today are little more than metrically-weak, bureaucratic programs aimed simply at establishing a legally-grounded employee record and a rough basis for merit increases. This article outlines the rationale and procedural framework for a talent development and…

Development of a benchtop baking method for chemically leavened crackers. II. Validation of the method

USDA-ARS?s Scientific Manuscript database

A benchtop baking method has been developed to predict the contribution of gluten functionality to overall flour performance for chemically leavened crackers. Using a diagnostic formula and procedure, dough rheology was analyzed to evaluate the extent of gluten development during mixing and machinin...

The Development and Use of Interactive Videodisc Instruction for Navy Medical Corpsmen.

ERIC Educational Resources Information Center

Whitney, Marcia A.; Strub, Philip M.

The University of Maryland's Center for Instructional Development and Evaluation has developed interactive video material for the Navy Medical Department to teach Navy medical corpsmen appropriate response procedures for each of seven emergency medical conditions: angina pectoris, acute myocardial infarction, congestive heart failure, stroke,…

How to test herbicides at forest tree nurseries.

Treesearch

Roger E. Sandquist; Peyton W. Owston; Stephen E. McDonald

1981-01-01

Procedures developed in a cooperative westwide study of weed control in forest tree nurseries are described in a form modified for use by nursery managers. The proven, properly designed test and evaluation methods can be used to generate data needed for evaluation and registration of herbicides.

Global environment facility: Independent evaluation of the pilot phase; Fonds pour l`environnement mondial: evaluation independante de la phase pilote

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-12-31

This study responds to a request by participants in the Global Environment Facility (GEF) for an independent evaluation of the pilot phase. It profiles the GEF, discusses its policy framework, and reviews project development procedures and the strategies and projects in each of the GEF`s four focal areas. The study concludes that fundamental changes must occur and recommends specific reforms, such as articulating more clearly the GEF`s mandate, objectives, and strategies; addressing deficiencies in meeting its global focus; improving capacities and procedures within implementing agencies for managing the portfolio; and increasing non-government organization (NGO), country and community-level participation.

Evaluating a Dental Diagnostic Terminology in an Electronic Health Record

PubMed Central

White, Joel M.; Kalenderian, Elsbeth; Stark, Paul C.; Ramoni, Rachel L.; Vaderhobli, Ram; Walji, Muhammad F.

2011-01-01

Standardized treatment procedure codes and terms are routinely used in dentistry. Utilization of a diagnostic terminology is common in medicine, but there is not a satisfactory or commonly standardized dental diagnostic terminology available at this time. Recent advances in dental informatics have provided an opportunity for inclusion of diagnostic codes and terms as part of treatment planning and documentation in the patient treatment history. This article reports the results of the use of a diagnostic coding system in a large dental school’s predoctoral clinical practice. A list of diagnostic codes and terms, called Z codes, was developed by dental faculty members. The diagnostic codes and terms were implemented into an electronic health record (EHR) for use in a predoctoral dental clinic. The utilization of diagnostic terms was quantified. The validity of Z code entry was evaluated by comparing the diagnostic term entered to the procedure performed, where valid diagnosis-procedure associations were determined by consensus among three calibrated academically based dentists. A total of 115,004 dental procedures were entered into the EHR during the year sampled. Of those, 43,053 were excluded from this analysis because they represent diagnosis or other procedures unrelated to treatments. Among the 71,951 treatment procedures, 27,973 had diagnoses assigned to them with an overall utilization of 38.9 percent. Of the 147 available Z codes, ninety-three were used (63.3 percent). There were 335 unique procedures provided and 2,127 procedure/diagnosis pairs captured in the EHR. Overall, 76.7 percent of the diagnoses entered were valid. We conclude that dental diagnostic terminology can be incorporated within an electronic health record and utilized in an academic clinical environment. Challenges remain in the development of terms and implementation and ease of use that, if resolved, would improve the utilization. PMID:21546594

Application and Evaluation of an Expert Judgment Elicitation Procedure for Correlations.

PubMed

Zondervan-Zwijnenburg, Mariëlle; van de Schoot-Hubeek, Wenneke; Lek, Kimberley; Hoijtink, Herbert; van de Schoot, Rens

2017-01-01

The purpose of the current study was to apply and evaluate a procedure to elicit expert judgments about correlations, and to update this information with empirical data. The result is a face-to-face group elicitation procedure with as its central element a trial roulette question that elicits experts' judgments expressed as distributions. During the elicitation procedure, a concordance probability question was used to provide feedback to the experts on their judgments. We evaluated the elicitation procedure in terms of validity and reliability by means of an application with a small sample of experts. Validity means that the elicited distributions accurately represent the experts' judgments. Reliability concerns the consistency of the elicited judgments over time. Four behavioral scientists provided their judgments with respect to the correlation between cognitive potential and academic performance for two separate populations enrolled at a specific school in the Netherlands that provides special education to youth with severe behavioral problems: youth with autism spectrum disorder (ASD), and youth with diagnoses other than ASD. Measures of face-validity, feasibility, convergent validity, coherence, and intra-rater reliability showed promising results. Furthermore, the current study illustrates the use of the elicitation procedure and elicited distributions in a social science application. The elicited distributions were used as a prior for the correlation, and updated with data for both populations collected at the school of interest. The current study shows that the newly developed elicitation procedure combining the trial roulette method with the elicitation of correlations is a promising tool, and that the results of the procedure are useful as prior information in a Bayesian analysis.

Design and evaluation of a single-span bridge using ultra-high performance concrete.

DOT National Transportation Integrated Search

2009-09-01

"Research presented herein describes an application of a newly developed material called Ultra-High Performance Concrete (UHPC) to a : single-span bridge. The two primary objectives of this research were to develop a shear design procedure for possib...

Design and evaluation of a single-span bridge using ultra-high performance concrete.

DOT National Transportation Integrated Search

2009-09-01

Research presented herein describes an application of a newly developed material called Ultra-High Performance Concrete (UHPC) to a : single-span bridge. The two primary objectives of this research were to develop a shear design procedure for possibl...

Assessing Competence in Pediatric Cardiology

ERIC Educational Resources Information Center

Johnson, Apul E.; And Others

1976-01-01

In response to the need to assure physician competence, a rating scale was developed at the University of Minnesota Medical School for use in evaluating clinical competence in pediatric cardiology. It was tested on first- and second-year specialists. Development and testing procedures are described. (JT)

Setting Healthcare Priorities at the Macro and Meso Levels: A Framework for Evaluation

PubMed Central

Barasa, Edwine W.; Molyneux, Sassy; English, Mike; Cleary, Susan

2015-01-01

Background: Priority setting in healthcare is a key determinant of health system performance. However, there is no widely accepted priority setting evaluation framework. We reviewed literature with the aim of developing and proposing a framework for the evaluation of macro and meso level healthcare priority setting practices. Methods: We systematically searched Econlit, PubMed, CINAHL, and EBSCOhost databases and supplemented this with searches in Google Scholar, relevant websites and reference lists of relevant papers. A total of 31 papers on evaluation of priority setting were identified. These were supplemented by broader theoretical literature related to evaluation of priority setting. A conceptual review of selected papers was undertaken. Results: Based on a synthesis of the selected literature, we propose an evaluative framework that requires that priority setting practices at the macro and meso levels of the health system meet the following conditions: (1) Priority setting decisions should incorporate both efficiency and equity considerations as well as the following outcomes; (a) Stakeholder satisfaction, (b) Stakeholder understanding, (c) Shifted priorities (reallocation of resources), and (d) Implementation of decisions. (2) Priority setting processes should also meet the procedural conditions of (a) Stakeholder engagement, (b) Stakeholder empowerment, (c) Transparency, (d) Use of evidence, (e) Revisions, (f) Enforcement, and (g) Being grounded on community values. Conclusion: Available frameworks for the evaluation of priority setting are mostly grounded on procedural requirements, while few have included outcome requirements. There is, however, increasing recognition of the need to incorporate both consequential and procedural considerations in priority setting practices. In this review, we adapt an integrative approach to develop and propose a framework for the evaluation of priority setting practices at the macro and meso levels that draws from these complementary schools of thought. PMID:26673332

Setting Healthcare Priorities at the Macro and Meso Levels: A Framework for Evaluation.

PubMed

Barasa, Edwine W; Molyneux, Sassy; English, Mike; Cleary, Susan

2015-09-16

Priority setting in healthcare is a key determinant of health system performance. However, there is no widely accepted priority setting evaluation framework. We reviewed literature with the aim of developing and proposing a framework for the evaluation of macro and meso level healthcare priority setting practices. We systematically searched Econlit, PubMed, CINAHL, and EBSCOhost databases and supplemented this with searches in Google Scholar, relevant websites and reference lists of relevant papers. A total of 31 papers on evaluation of priority setting were identified. These were supplemented by broader theoretical literature related to evaluation of priority setting. A conceptual review of selected papers was undertaken. Based on a synthesis of the selected literature, we propose an evaluative framework that requires that priority setting practices at the macro and meso levels of the health system meet the following conditions: (1) Priority setting decisions should incorporate both efficiency and equity considerations as well as the following outcomes; (a) Stakeholder satisfaction, (b) Stakeholder understanding, (c) Shifted priorities (reallocation of resources), and (d) Implementation of decisions. (2) Priority setting processes should also meet the procedural conditions of (a) Stakeholder engagement, (b) Stakeholder empowerment, (c) Transparency, (d) Use of evidence, (e) Revisions, (f) Enforcement, and (g) Being grounded on community values. Available frameworks for the evaluation of priority setting are mostly grounded on procedural requirements, while few have included outcome requirements. There is, however, increasing recognition of the need to incorporate both consequential and procedural considerations in priority setting practices. In this review, we adapt an integrative approach to develop and propose a framework for the evaluation of priority setting practices at the macro and meso levels that draws from these complementary schools of thought. © 2015 by Kerman University of Medical Sciences.

Summer Institute in Engineering and Computer Applications: Learning Through Experience

NASA Technical Reports Server (NTRS)

Langdon, Joan S.

1995-01-01

The document describing the Summer Institute project is made up of the following information: Administrative procedures; Seminars/Special Courses/Tours/College fair; Facilities/ Transportation; Staff and Administration; Collaboration; Participant/Project monitoring and evaluation; Fiscal and developmental activities; Job readiness/Job internship development and placement; and Student Follow-up/Tracking. Appendices include presentations, self-evaluations; abstracts and papers developed by the students during their participation in the program.

Models and Procedures for Evaluating Government Provided Leisure Services.

ERIC Educational Resources Information Center

McLean, Christine

1978-01-01

The government attempted to set up a viable management information and feedback system for evaluating accountability in services delivery. Conceptual models for agency goals and services delivery were designed and measures were developed in the provision of leisure and recreational services. Two citizen surveys are described. (Author/CTM)

Qualitative Collection Analysis: The Conspectus Methodology. SPEC Kit 151.

ERIC Educational Resources Information Center

Jakubs, Deborah

The introduction to this Systems and Procedures Exchange Center (SPEC) kit explains the Conspectus method, which was developed in 1980 by the Research Libraries Group (RLG) as a means of systematically and qualitatively evaluating large library collections. The discussion considers advantages and disadvantages of this tool, which evaluates past…

VAMP: A computer program for calculating volume, area, and mass properties of aerospace vehicles

NASA Technical Reports Server (NTRS)

Norton, P. J.; Glatt, C. R.

1974-01-01

A computerized procedure developed for analyzing aerospace vehicles evaluates the properties of elemental surface areas with specified thickness by accumulating and combining them with arbitrarily specified mass elements to form a complete evaluation. Picture-like images of the geometric description are capable of being generated.

US-1136, US-1137, and US-1138 cowpea lines for cover crop use

USDA-ARS?s Scientific Manuscript database

Following five years of field evaluation, three cowpea populations were selected as best adapted for use as a cover crop. A pure line selection procedure was used to develop genetically uniform lines from the segregating populations. Field evaluations demonstrated that the lines grow rapidly for u...

Using Photo-Interviewing as Tool for Research and Evaluation.

ERIC Educational Resources Information Center

Dempsey, John V.; Tucker, Susan A.

Arguing that photo-interviewing yields richer data than that usually obtained from verbal interviewing procedures alone, it is proposed that this method of data collection be added to "standard" methodologies in instructional development research and evaluation. The process, as described in this paper, consists of using photographs of…

76 FR 59408 - Statement of Organizations, Functions, and Delegations of Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... it has reorganized the Center for Drug Evaluation and Research (CDER) by establishing two offices and... for Drug Evaluation and Research (HFD-063), Food and Drug Administration, 11919 Rockville Pike, rm.... Provides Center oversight and leadership in the development of medical policy procedures and policy...

Development and applications of algorithms for calculating the transonic flow about harmonically oscillating wings

NASA Technical Reports Server (NTRS)

Ehlers, F. E.; Weatherill, W. H.; Yip, E. L.

1984-01-01

A finite difference method to solve the unsteady transonic flow about harmonically oscillating wings was investigated. The procedure is based on separating the velocity potential into steady and unsteady parts and linearizing the resulting unsteady differential equation for small disturbances. The differential equation for the unsteady velocity potential is linear with spatially varying coefficients and with the time variable eliminated by assuming harmonic motion. An alternating direction implicit procedure was investigated, and a pilot program was developed for both two and three dimensional wings. This program provides a relatively efficient relaxation solution without previously encountered solution instability problems. Pressure distributions for two rectangular wings are calculated. Conjugate gradient techniques were developed for the asymmetric, indefinite problem. The conjugate gradient procedure is evaluated for applications to the unsteady transonic problem. Different equations for the alternating direction procedure are derived using a coordinate transformation for swept and tapered wing planforms. Pressure distributions for swept, untaped wings of vanishing thickness are correlated with linear results for sweep angles up to 45 degrees.

Recent Achievements of the Collaboratory for the Study of Earthquake Predictability

NASA Astrophysics Data System (ADS)

Jackson, D. D.; Liukis, M.; Werner, M. J.; Schorlemmer, D.; Yu, J.; Maechling, P. J.; Zechar, J. D.; Jordan, T. H.

2015-12-01

Maria Liukis, SCEC, USC; Maximilian Werner, University of Bristol; Danijel Schorlemmer, GFZ Potsdam; John Yu, SCEC, USC; Philip Maechling, SCEC, USC; Jeremy Zechar, Swiss Seismological Service, ETH; Thomas H. Jordan, SCEC, USC, and the CSEP Working Group The Collaboratory for the Study of Earthquake Predictability (CSEP) supports a global program to conduct prospective earthquake forecasting experiments. CSEP testing centers are now operational in California, New Zealand, Japan, China, and Europe with 435 models under evaluation. The California testing center, operated by SCEC, has been operational since Sept 1, 2007, and currently hosts 30-minute, 1-day, 3-month, 1-year and 5-year forecasts, both alarm-based and probabilistic, for California, the Western Pacific, and worldwide. We have reduced testing latency, implemented prototype evaluation of M8 forecasts, and are currently developing formats and procedures to evaluate externally-hosted forecasts and predictions. These efforts are related to CSEP support of the USGS program in operational earthquake forecasting and a DHS project to register and test external forecast procedures from experts outside seismology. A retrospective experiment for the 2010-2012 Canterbury earthquake sequence has been completed, and the results indicate that some physics-based and hybrid models outperform purely statistical (e.g., ETAS) models. The experiment also demonstrates the power of the CSEP cyberinfrastructure for retrospective testing. Our current development includes evaluation strategies that increase computational efficiency for high-resolution global experiments, such as the evaluation of the Global Earthquake Activity Rate (GEAR) model. We describe the open-source CSEP software that is available to researchers as they develop their forecast models (http://northridge.usc.edu/trac/csep/wiki/MiniCSEP). We also discuss applications of CSEP infrastructure to geodetic transient detection and how CSEP procedures are being adapted to ground motion prediction experiments.

The PrOSTE: identifying key components of effective procedural teaching.

PubMed

McSparron, Jakob I; Ricotta, Daniel N; Moskowitz, Ari; Volpicelli, Frank M; Roberts, David H; Schwartzstein, Richard M; Huang, Grace C

2015-02-01

Novel approaches for faculty development and assessment of procedural teaching skills are needed to improve the procedural education of trainees. The Objective Structured Teaching Exercise (OSTE) entails a simulated encounter in which faculty are observed teaching a standardized student and has been used to evaluate teaching skills. Use of an OSTE to assess the teaching of central venous catheterization has not been reported. The purpose of this study was to develop a procedural OSTE for subclavian central venous catheter (CVC) insertion and to determine specific aspects of procedural teaching associated with improved skills in novices. Critical care faculty/fellows taught a standardized student to insert a CVC in a simulator. We assessed the instructor's teaching skills using rating scales to generate a procedural teaching score. After this encounter, the instructor taught novice medical students to place CVCs in simulators. Novices then independently placed catheters in simulators and were evaluated by trained observers using a checklist. Generalized estimating equations were used to examine the correlation between specific teaching behaviors and the novices' skills in CVC placement. We recruited 10 participants to serve as teachers and 30 preclinical medical students to serve as novice learners. The overall mean procedural teaching score was 85.5 (±15.4). Improved student performance was directly related to the degree to which the teacher "provided positive feedback" (β = 1.53, SE = 0.44, P = 0.001), "offered learner suggestions for improvement" (β = 1.40, SE = 0.35, P < 0.001), and "demonstrated the procedure in a step-by-step manner" (β = 2.50, SE = 0.45, P < 0.001). There was no significant correlation between total scores and student skills (β = 0.06, SE = 0.46, P = 0.18). The OSTE is a standardized method to assess procedural teaching skills. Our findings suggest that specific aspects of procedural teaching should be emphasized to ensure effective transfer of psychomotor skills to trainees.

Design and Field Testing of a Systematic Procedure for Evaluating Vocational Programs. Final Report.

ERIC Educational Resources Information Center

Portland Public Schools, OR.

The purpose of a project was to design and field-test a system for evaluating the adequacy of the vocational curriculum utilized by the Vocational Village, an alternative school for the training of individuals who have experienced failure in other educational settings. Focus was on the development of an evaluation model which will assess the…

Faculty Performance Management System: The Faculty Development/Evaluation System at Beaufort Technical College, 1986-1987. Revised.

ERIC Educational Resources Information Center

Tobias, Earole; And Others

Designed for faculty members at Beaufort Technical College (BTC) in South Carolina, this handbook describes the college's faculty evaluation process and procedures. The first sections of the handbook explain the rationale and method for the faculty evaluation process, state the purposes and objectives of the system, and offer a model which breaks…

7 CFR 22.307 - Program evaluation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... which may contribute to the development of better management, coordination and planning procedures. ... of Agriculture and to the Federal Regional Councils, in sufficient time so as to arrive not later...

Atom Core Interactive Electronic Book to Develop Self Efficacy and Critical Thinking Skills

ERIC Educational Resources Information Center

Pradina, Luthfia Puspa; Suyatna, Agus

2018-01-01

The purpose of this research is to develop interactive atomic electronic school book (IESB) to cultivate critical thinking skills and confidence of students grade 12. The method used in this research was the ADDIE (Analyze Design Development Implementation Evaluation) development procedure which is limited to the test phase of product design…

Evaluation on Radiometric Capability of Chinese Optical Satellite Sensors

PubMed Central

Yang, Aixia; Zhong, Bo; Wu, Shanlong; Liu, Qinhuo

2017-01-01

The radiometric capability of on-orbit sensors should be updated on time due to changes induced by space environmental factors and instrument aging. Some sensors, such as Moderate Resolution Imaging Spectroradiometer (MODIS), have onboard calibrators, which enable real-time calibration. However, most Chinese remote sensing satellite sensors lack onboard calibrators. Their radiometric calibrations have been updated once a year based on a vicarious calibration procedure, which has affected the applications of the data. Therefore, a full evaluation of the sensors’ radiometric capabilities is essential before quantitative applications can be made. In this study, a comprehensive procedure for evaluating the radiometric capability of several Chinese optical satellite sensors is proposed. In this procedure, long-term radiometric stability and radiometric accuracy are the two major indicators for radiometric evaluation. The radiometric temporal stability is analyzed by the tendency of long-term top-of-atmosphere (TOA) reflectance variation; the radiometric accuracy is determined by comparison with the TOA reflectance from MODIS after spectrally matching. Three Chinese sensors including the Charge-Coupled Device (CCD) camera onboard Huan Jing 1 satellite (HJ-1), as well as the Visible and Infrared Radiometer (VIRR) and Medium-Resolution Spectral Imager (MERSI) onboard the Feng Yun 3 satellite (FY-3) are evaluated in reflective bands based on this procedure. The results are reasonable, and thus can provide reliable reference for the sensors’ application, and as such will promote the development of Chinese satellite data. PMID:28117745

Evaluation on Radiometric Capability of Chinese Optical Satellite Sensors.

PubMed

Yang, Aixia; Zhong, Bo; Wu, Shanlong; Liu, Qinhuo

2017-01-22

The radiometric capability of on-orbit sensors should be updated on time due to changes induced by space environmental factors and instrument aging. Some sensors, such as Moderate Resolution Imaging Spectroradiometer (MODIS), have onboard calibrators, which enable real-time calibration. However, most Chinese remote sensing satellite sensors lack onboard calibrators. Their radiometric calibrations have been updated once a year based on a vicarious calibration procedure, which has affected the applications of the data. Therefore, a full evaluation of the sensors' radiometric capabilities is essential before quantitative applications can be made. In this study, a comprehensive procedure for evaluating the radiometric capability of several Chinese optical satellite sensors is proposed. In this procedure, long-term radiometric stability and radiometric accuracy are the two major indicators for radiometric evaluation. The radiometric temporal stability is analyzed by the tendency of long-term top-of-atmosphere (TOA) reflectance variation; the radiometric accuracy is determined by comparison with the TOA reflectance from MODIS after spectrally matching. Three Chinese sensors including the Charge-Coupled Device (CCD) camera onboard Huan Jing 1 satellite (HJ-1), as well as the Visible and Infrared Radiometer (VIRR) and Medium-Resolution Spectral Imager (MERSI) onboard the Feng Yun 3 satellite (FY-3) are evaluated in reflective bands based on this procedure. The results are reasonable, and thus can provide reliable reference for the sensors' application, and as such will promote the development of Chinese satellite data.

Diagnosing Expertise: Human Capital, Decision Making, and Performance among Physicians

PubMed Central

Currie, Janet; MacLeod, W. Bentley

2017-01-01

Expert performance is often evaluated assuming that good experts have good outcomes. We examine expertise in medicine and develop a model that allows for two dimensions of physician performance: decision making and procedural skill. Better procedural skill increases the use of intensive procedures for everyone, while better decision making results in a reallocation of procedures from fewer low-risk to high-risk cases. We show that poor diagnosticians can be identified using administrative data and that improving decision making improves birth outcomes by reducing C-section rates at the bottom of the risk distribution and increasing them at the top of the distribution. PMID:29276336

Electron beam weld development on a Filter Pack Assembly

NASA Astrophysics Data System (ADS)

Dereskiewicz, J. P.

1994-06-01

A continuous electron beam welding procedure was developed to replace the manual gas tungsten arc welding procedure on the Filter Pack Assembly. A statistical study was used to evaluate the feasibility of electron beam welding 6061-T6 aluminum covers to A356 cast weldments throughout the joint tolerance range specified on product drawings. Peak temperature exposures were not high enough to degrade the heat sensitive electrical components inside the cast weldment. Actual weldments with alodine coating on the weld joint area were successfully cleaned using a nonmetallic fiberglass brush cleaning method.

Standardized Methods for Electronic Shearography

NASA Technical Reports Server (NTRS)

Lansing, Matthew D.

1997-01-01

Research was conducted in development of operating procedures and standard methods to evaluate fiber reinforced composite materials, bonded or sprayed insulation, coatings, and laminated structures with MSFC electronic shearography systems. Optimal operating procedures were developed for the Pratt and Whitney Electronic Holography/Shearography Inspection System (EH/SIS) operating in shearography mode, as well as the Laser Technology, Inc. (LTI) SC-4000 and Ettemeyer SHS-94 ISTRA shearography systems. Operating practices for exciting the components being inspected were studied, including optimal methods for transient heating with heat lamps and other methods as appropriate to enhance inspection capability.

The Effects of Varying Levels of Treatment Integrity on Child Compliance during Treatment with a Three-Step Prompting Procedure

ERIC Educational Resources Information Center

Wilder, David A.; Atwell, Julie; Wine, Byron

2006-01-01

The effects of three levels of treatment integrity (100%, 50%, and 0%) on child compliance were evaluated in the context of the implementation of a three-step prompting procedure. Two typically developing preschool children participated in the study. After baseline data on compliance to one of three common demands were collected, a therapist…

Development of a School Bus Fuel System Integrity Compliance Procedure. Final Report.

ERIC Educational Resources Information Center

Morrow, G. W.; Johnson, N. B.

This report presents a program that derived a compliance test procedure for school buses with a gross vehicle weight of 10,000 pounds or greater. The objective of this program was to evaluate Fuel System Integrity (FMVSS 301) in relation to school buses, conduct a limited state-of-the-art survey and run full-scale dynamic tests to produce an…

Ground Training Devices in Job Sample Approach to UPT [Undergraduate Pilot Training] Selection and Screening. Final Report, September 1972-August 1974.

ERIC Educational Resources Information Center

LeMaster, W. Dean; Gray, Thomas H.

The purpose of this study was to develop a screening procedure for undergraduate pilot training (UPT). This procedure was based upon the use of ground-based instrument trainers in which UPT candidates, naive to flying, were evaluated in their performance of job sample tasks; i.e., basic instrument flying. Training and testing sessions were…

Reaction control system/remote manipulator system automation

NASA Technical Reports Server (NTRS)

Hiers, Harry K.

1990-01-01

The objectives of this project is to evaluate the capability of the Procedural Reasoning System (PRS) in a typical real-time space shuttle application and to assess its potential for use in the Space Station Freedom. PRS, developed by SRI International, is a result of research in automating the monitoring and control of spacecraft systems. The particular application selected for the present work is the automation of malfunction handling procedures for the Shuttle Remote Manipulator System (SRMS). The SRMS malfunction procedures will be encoded within the PRS framework, a crew interface appropriate to the RMS application will be developed, and the real-time data interface software developed. The resulting PRS will then be integrated with the high-fidelity On-orbit Simulation of the NASA Johnson Space Center's System Engineering Simulator, and tests under various SRMS fault scenarios will be conducted.

New platform for evaluating ultrasound-guided interventional technologies

NASA Astrophysics Data System (ADS)

Kim, Younsu; Guo, Xiaoyu; Boctor, Emad M.

2016-04-01

Ultrasound-guided needle tracking systems are frequently used in surgical procedures. Various needle tracking technologies have been developed using ultrasound, electromagnetic sensors, and optical sensors. To evaluate these new needle tracking technologies, 3D volume information is often acquired to compute the actual distance from the needle tip to the target object. The image-guidance conditions for comparison are often inconsistent due to the ultrasound beam-thickness. Since 3D volumes are necessary, there is often some time delay between the surgical procedure and the evaluation. These evaluation methods will generally only measure the final needle location because they interrupt the surgical procedure. The main contribution of this work is a new platform for evaluating needle tracking systems in real-time, resolving the problems stated above. We developed new tools to evaluate the precise distance between the needle tip and the target object. A PZT element transmitting unit is designed as needle introducer shape so that it can be inserted in the needle. We have collected time of flight and amplitude information in real-time. We propose two systems to collect ultrasound signals. We demonstrate this platform on an ultrasound DAQ system and a cost-effective FPGA board. The results of a chicken breast experiment show the feasibility of tracking a time series of needle tip distances. We performed validation experiments with a plastisol phantom and have shown that the preliminary data fits a linear regression model with a RMSE of less than 0.6mm. Our platform can be applied to more general needle tracking methods using other forms of guidance.

UST CORRECTIVE ACTION TECHNOLOGIES: ENGINEERING DESIGN OF FREE PRODUCT RECOVERY SYSTEMS

EPA Science Inventory

The objective of this project was to develop a technical assistance document for assessment of subsurface hydrocarbon spills and for evaluating effects of well placement and pumping rates on separate phase plume control and on free product recovery. Procedures developed for estim...

IMPROVED RISK CHARACTERIZATION METHODS FOR DEVELOPING AQUATIC LIFE CRITERIA FOR NON-BIOACCUMULATIVE TOXICANTS

EPA Science Inventory

This project will use existing and developing information to evaluate and demonstrate procedures for more fully characterizing risks of non-bioaccumulative toxicants to aquatic organisms, and for incorporating these risks into aquatic life criteria. These efforts will address a v...

Development of new test procedures for measuring fine and coarse aggregates specific gravity.

DOT National Transportation Integrated Search

2009-09-01

The objective of the research is to develop and evaluate new test methods at determining the specific gravity and absorption of both fine and coarse aggregates. Current methods at determining the specific gravity and absorption of fine and coarse agg...

STARPAHC space-oriented medical evaluation. [telemedicine system

NASA Technical Reports Server (NTRS)

1979-01-01

Development of the STARPAHC telemedicine system is documented. Using STARPAHC assessment results and monitoring experience, on board and ground based flight medical system monitoring requirements and operational procedures were developed for use with the Space Transportation System during OFT and mature operation phases of the shuttle.

Dermal and inhalation acute toxic class methods: test procedures and biometric evaluations for the Globally Harmonized Classification System.

PubMed

Holzhütter, H G; Genschow, E; Diener, W; Schlede, E

2003-05-01

The acute toxic class (ATC) methods were developed for determining LD(50)/LC(50) estimates of chemical substances with significantly fewer animals than needed when applying conventional LD(50)/LC(50) tests. The ATC methods are sequential stepwise procedures with fixed starting doses/concentrations and a maximum of six animals used per dose/concentration. The numbers of dead/moribund animals determine whether further testing is necessary or whether the test is terminated. In recent years we have developed classification procedures for the oral, dermal and inhalation routes of administration by using biometric methods. The biometric approach assumes a probit model for the mortality probability of a single animal and assigns the chemical to that toxicity class for which the best concordance is achieved between the statistically expected and the observed numbers of dead/moribund animals at the various steps of the test procedure. In previous publications we have demonstrated the validity of the biometric ATC methods on the basis of data obtained for the oral ATC method in two-animal ring studies with 15 participants from six countries. Although the test procedures and biometric evaluations for the dermal and inhalation ATC methods have already been published, there was a need for an adaptation of the classification schemes to the starting doses/concentrations of the Globally Harmonized Classification System (GHS) recently adopted by the Organization for Economic Co-operation and Development (OECD). Here we present the biometric evaluation of the dermal and inhalation ATC methods for the starting doses/concentrations of the GHS and of some other international classification systems still in use. We have developed new test procedures and decision rules for the dermal and inhalation ATC methods, which require significantly fewer animals to provide predictions of toxicity classes, that are equally good or even better than those achieved by using the conventional LD(50)/LC(50) methods. In order to cope with rather narrow dose/concentration classes of the GHS we have, as in our previous publications, combined the outcome of all results that can be obtained during testing for the allocation to one of the defined toxicity classes of the GHS. Our results strongly recommend the deletion of the dermal LD(50) and the inhalation LC(50) test as regulatory tests and the adoption of the dermal and inhalation ATC methods as internationally accepted alternatives.

Analysis of direct costs of decompressive craniectomy in victims of traumatic brain injury.

PubMed

Badke, Guilherme Lellis; Araujo, João Luiz Vitorino; Miura, Flávio Key; Guirado, Vinicius Monteiro de Paula; Saade, Nelson; Paiva, Aline Lariessy Campos; Avelar, Tiago Marques; Pedrozo, Charles Alfred Grander; Veiga, José Carlos Esteves

2018-04-01

Decompressive craniectomy is a procedure required in some cases of traumatic brain injury (TBI). This manuscript evaluates the direct costs and outcomes of decompressive craniectomy for TBI in a developing country and describes the epidemiological profile. A retrospective study was performed using a five-year neurosurgical database, taking a sample of patients with TBI who underwent decompressive craniectomy. Several variables were considered and a formula was developed for calculating the total cost. Most patients had multiple brain lesions and the majority (69.0%) developed an infectious complication. The general mortality index was 68.8%. The total cost was R$ 2,116,960.22 (US$ 661,550.06) and the mean patient cost was R$ 66,155.00 (US$ 20,673.44). Decompressive craniectomy for TBI is an expensive procedure that is also associated with high morbidity and mortality. This was the first study performed in a developing country that aimed to evaluate the direct costs. Prevention measures should be a priority.

Inviting Policy Development: From Public Relations to Public Creations.

ERIC Educational Resources Information Center

Webster, Sheila J.; Novak, John M.

Inviting policy development is an attempt to cordially summon those who are involved and affected by rules, codes, and procedures to understand and participate in the formulation, implementation, and evaluation of policies. This paper first presents criteria for an invitational framework for policy development and then goes on to discuss the…

Innovation in internship preparation: an operative anatomy course increases senior medical students' knowledge and confidence.

PubMed

Tocco, Nikki; Brunsvold, Melissa; Kabbani, Loay; Lin, Jules; Stansfield, Brent; Mueller, Dean; Minter, Rebecca M

2013-08-01

An operative anatomy course was developed within the construct of a surgical internship preparatory curriculum. This course provided fourth-year medical students matching into a surgical residency the opportunity to perform intern-level procedures on cadavers under the guidance of surgical faculty members. Senior medical students performed intern-level procedures on cadavers with the assistance of faculty surgeons. Students' confidence, anxiety, and procedural knowledge were evaluated both preoperatively and postoperatively. Preoperative and postoperative data were compared both collectively and based on individual procedures. Student confidence and procedural knowledge significantly increased and anxiety significantly decreased when preoperative and postoperative data were compared (P < .05). Students reported moderate to significant improvement in their ability to perform a variety of surgical tasks. The consistent improvement in confidence, knowledge, and anxiety justifies further development of an operative anatomy course, with future assessment of the impact on performance in surgical residency. Copyright © 2013 Elsevier Inc. All rights reserved.

Detection of laryngeal function using speech and electroglottographic data.

PubMed

Childers, D G; Bae, K S

1992-01-01

The purpose of this research was to develop quantitative measures for the assessment of laryngeal function using speech and electroglottographic (EGG) data. We developed two procedures for the detection of laryngeal pathology: 1) a spectral distortion measure using pitch synchronous and asynchronous methods with linear predictive coding (LPC) vectors and vector quantization (VQ) and 2) analysis of the EGG signal using time interval and amplitude difference measures. The VQ procedure was conjectured to offer the possibility of circumventing the need to estimate the glottal volume velocity wave-form by inverse filtering techniques. The EGG procedure was to evaluate data that was "nearly" a direct measure of vocal fold vibratory motion and thus was conjectured to offer the potential for providing an excellent assessment of laryngeal function. A threshold based procedure gave 75.9 and 69.0% probability of pathological detection using procedures 1) and 2), respectively, for 29 patients with pathological voices and 52 normal subjects. The false alarm probability was 9.6% for the normal subjects.

Overview of the DAEDALOS project

NASA Astrophysics Data System (ADS)

Bisagni, Chiara

2015-10-01

The "Dynamics in Aircraft Engineering Design and Analysis for Light Optimized Structures" (DAEDALOS) project aimed to develop methods and procedures to determine dynamic loads by considering the effects of dynamic buckling, material damping and mechanical hysteresis during aircraft service. Advanced analysis and design principles were assessed with the scope of partly removing the uncertainty and the conservatism of today's design and certification procedures. To reach these objectives a DAEDALOS aircraft model representing a mid-size business jet was developed. Analysis and in-depth investigation of the dynamic response were carried out on full finite element models and on hybrid models. Material damping was experimentally evaluated, and different methods for damping evaluation were developed, implemented in finite element codes and experimentally validated. They include a strain energy method, a quasi-linear viscoelastic material model, and a generalized Maxwell viscous material damping. Panels and shells representative of typical components of the DAEDALOS aircraft model were experimentally tested subjected to static as well as dynamic loads. Composite and metallic components of the aircraft model were investigated to evaluate the benefit in terms of weight saving.

The development and validation of The Inquiry Science Observation Coding Sheet.

PubMed

Brandon, P R; Taum, A K H; Young, D B; Pottenger, F M

2008-08-01

Evaluation reports increasingly document the degree of program implementation, particularly the extent to which programs adhere to prescribed steps and procedures. Many reports are cursory, however, and few, if any, fully portray the long and winding path taken when developing evaluation instruments, particularly observation instruments. In this article, we describe the development of an observational method for evaluating the degree to which K-12 inquiry science programs are implemented, including the many steps and decisions that occurred during the development, and present evidence for the reliability and validity of the data that we collected with the instrument. The article introduces a method for measuring the adherence of inquiry science implementation and gives evaluators a full picture of what they might expect when developing observation instruments for assessing the degree of program implementation.

29 CFR 1956.22 - Procedures for evaluation and monitoring.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Procedures for evaluation and monitoring. 1956.22 Section 1956.22 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION..., Change, Evaluation and Withdrawal of Approval Procedures § 1956.22 Procedures for evaluation and...

Separator Materials Used in Secondary Alkaline Batteries Characterized and Evaluated

NASA Technical Reports Server (NTRS)

1996-01-01

Nickel-cadmium (Ni/Cd) and nickel-hydrogen (Ni/H2) secondary alkaline batteries are vital to aerospace applications. Battery performance and cycle life are significantly affected by the type of separators used in those batteries. A team from NASA Lewis Research Center's Electrochemical Technology Branch developed standardized testing procedures to characterize and evaluate new and existing separator materials to improve performance and cycle life of secondary alkaline batteries. Battery separators must function as good electronic insulators and as efficient electrolyte reservoirs. At present, new types of organic and inorganic separator materials are being developed for Ni/Cd and Ni/H2 batteries. The separator material previously used in the NASA standard Ni/Cd was Pellon 2505, a 100-percent nylon-6 polymer that must be treated with zinc chloride (ZnCl2) to bond the fibers. Because of stricter Environmental Protection Agency regulation of ZnCl2 emissions, the battery community has been searching for new separators to replace Pellon 2505. As of today, two candidate separator materials have been identified; however, neither of the two materials have performed as well as Pellon 2505. The separator test procedures that were devised at Lewis are being implemented to expedite the search for new battery separators. The new test procedures, which are being carried out in the Separator Laboratory at Lewis, have been designed to guarantee accurate evaluations of the properties that are critical for sustaining proper battery operation. These properties include physical and chemical stability, chemical purity, gas permeability, electrolyte retention and distribution, uniformity, porosity, and area resistivity. A manual containing a detailed description of 12 separator test procedures has been drafted and will be used by the battery community to evaluate candidate separator materials for specific applications. These standardized procedures will allow for consistent, uniform, and reliable results that will ensure that separator materials have the desired properties for long life and good performance in secondary alkaline cells.

Treatment of control data in lunar phototriangulation. [application of statistical procedures and development of mathematical and computer techniques

NASA Technical Reports Server (NTRS)

Wong, K. W.

1974-01-01

In lunar phototriangulation, there is a complete lack of accurate ground control points. The accuracy analysis of the results of lunar phototriangulation must, therefore, be completely dependent on statistical procedure. It was the objective of this investigation to examine the validity of the commonly used statistical procedures, and to develop both mathematical techniques and computer softwares for evaluating (1) the accuracy of lunar phototriangulation; (2) the contribution of the different types of photo support data on the accuracy of lunar phototriangulation; (3) accuracy of absolute orientation as a function of the accuracy and distribution of both the ground and model points; and (4) the relative slope accuracy between any triangulated pass points.

Evaluation of combinations of procedures in cesarean section.

PubMed

Stark, M; Chavkin, Y; Kupfersztain, C; Guedj, P; Finkel, A R

1995-03-01

To evaluate a procedure for cesarean section, consisting of a number of surgical techniques adopted from various sources and further developed. The principal elements of the cesarean section procedure followed were: the Joel-Cohen method for opening the abdomen, suturing the uterus in one layer, and non-closure of the visceral and parietal peritoneal layers. The postoperative recovery of women who underwent this procedure (JCl--group) was compared with that of women who had undergone a Pfannenstiel incision, in which the uterus is sutured in two layers, and both peritoneal layers sutured (Pf2++ group). The incidence of postoperative febrile morbidity was 7.7% in the JCl--group compared with 19.8% in the Pf2++ group (P < 0.05). Adhesions were found in 6.3% of repeat operations after the JCl--operation compared with 28.8% after the Pf2++ operation (P < 0.05), and there was a non-significant trend toward fewer postoperative analgesics in the JCl--group. The cesarean section procedure we have devised is not only safe, but has a lower risk of long- and short-term complications.

Multiple Hollow Cathode Wear Testing for the Space Station Plasma Contactor

NASA Technical Reports Server (NTRS)

Soulas, George C.

1994-01-01

A wear test of four hollow cathodes was conducted to resolve issues associated with the Space Station plasma contactor. The objectives of this test were to evaluate unit-to-unit dispersions, verify the transportability of contamination control protocols developed by the project, and to evaluate cathode contamination control and activation procedures to enable simplification of the gas feed system and heater power processor. These objectives were achieved by wear testing four cathodes concurrently to 2000 hours. Test results showed maximum unit-to-unit deviations for discharge voltages and cathode tip temperatures to be +/-3 percent and +/-2 percent, respectively, of the nominal values. Cathodes utilizing contamination control procedures known to increase cathode lifetime showed no trends in their monitored parameters that would indicate a possible failure, demonstrating that contamination control procedures had been successfully transferred. Comparisons of cathodes utilizing and not utilizing a purifier or simplified activation procedure showed similar behavior during wear testing and pre- and post-test performance characterizations. This behavior indicates that use of simplified cathode systems and procedures is consistent with long cathode lifetimes.

A unified procedure for meta-analytic evaluation of surrogate end points in randomized clinical trials

PubMed Central

Dai, James Y.; Hughes, James P.

2012-01-01

The meta-analytic approach to evaluating surrogate end points assesses the predictiveness of treatment effect on the surrogate toward treatment effect on the clinical end point based on multiple clinical trials. Definition and estimation of the correlation of treatment effects were developed in linear mixed models and later extended to binary or failure time outcomes on a case-by-case basis. In a general regression setting that covers nonnormal outcomes, we discuss in this paper several metrics that are useful in the meta-analytic evaluation of surrogacy. We propose a unified 3-step procedure to assess these metrics in settings with binary end points, time-to-event outcomes, or repeated measures. First, the joint distribution of estimated treatment effects is ascertained by an estimating equation approach; second, the restricted maximum likelihood method is used to estimate the means and the variance components of the random treatment effects; finally, confidence intervals are constructed by a parametric bootstrap procedure. The proposed method is evaluated by simulations and applications to 2 clinical trials. PMID:22394448

Flat panel display test and evaluation: procedures, standards, and facilities

NASA Astrophysics Data System (ADS)

Jackson, Timothy W.; Daniels, Reginald; Hopper, Darrel G.

1997-07-01

This paper addresses flat panel display test and evaluation via a discussion of procedures, standards and facilities. Procedures need to be carefully developed and documented to ensure that test accomplished in separate laboratories produce comparable results. The tests themselves must not be a source of inconsistency in test results when such comparisons are made in the course of procurements or new technology prototype evaluations. Standards are necessary to expedite the transition of the new display technologies into applications and to lower the costs of custom parts applied across disparate applications. The flat panel display industry is in the course of ascertaining and formulating such standards as they are of value to designers, manufacturers, marketers and users of civil and military products and equipment. Additionally, in order to inform the DoD and industry, the test and evaluation facilities of the Air Force Research Laboratory Displays Branch are described. These facilities are available to support procurements involving flat panel displays and to examine new technology prototypes. Finally, other government display testing facilities within the Navy and the Army are described.

Experimental and numerical research on forging with torsion

NASA Astrophysics Data System (ADS)

Petrov, Mikhail A.; Subich, Vadim N.; Petrov, Pavel A.

2017-10-01

Increasing the efficiency of the technological operations of blank production is closely related to the computer-aided technologies (CAx). On the one hand, the practical result represents reality exactly. On the other hand, the development procedure of new process development demands unrestricted resources, which are limited on the SMEs. The tools of CAx were successfully applied for development of new process of forging with torsion and result analysis as well. It was shown, that the theoretical calculations find the confirmation both in praxis and during numerical simulation. The mostly used constructional materials were under study. The torque angles were stated. The simulated results were evaluated by experimental procedure.

Evaluation of dynamical models: dissipative synchronization and other techniques.

PubMed

Aguirre, Luis Antonio; Furtado, Edgar Campos; Tôrres, Leonardo A B

2006-12-01

Some recent developments for the validation of nonlinear models built from data are reviewed. Besides giving an overall view of the field, a procedure is proposed and investigated based on the concept of dissipative synchronization between the data and the model, which is very useful in validating models that should reproduce dominant dynamical features, like bifurcations, of the original system. In order to assess the discriminating power of the procedure, four well-known benchmarks have been used: namely, Duffing-Ueda, Duffing-Holmes, and van der Pol oscillators, plus the Hénon map. The procedure, developed for discrete-time systems, is focused on the dynamical properties of the model, rather than on statistical issues. For all the systems investigated, it is shown that the discriminating power of the procedure is similar to that of bifurcation diagrams--which in turn is much greater than, say, that of correlation dimension--but at a much lower computational cost.

The Visible Signature Modelling and Evaluation ToolBox

DTIC Science & Technology

2008-12-01

Technology Organisation DSTO–TR–2212 ABSTRACT A new software suite, the Visible Signature ToolBox ( VST ), has been developed to model and evaluate the...visible signatures of maritime platforms. The VST is a collection of commercial, off-the-shelf software and DSTO developed pro- grams and procedures. The...suite. The VST can be utilised to model and assess visible signatures of maritime platforms. A number of examples are presented to demonstrate the

34 CFR 300.304 - Evaluation procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Educational Placements Evaluations and Reevaluations § 300.304 Evaluation procedures. (a) Notice. The public... conducting the evaluation, the public agency must— (1) Use a variety of assessment tools and strategies to... evaluation procedures. Each public agency must ensure that— (1) Assessments and other evaluation materials...

Simulation of the XV-15 tilt rotor research aircraft

NASA Technical Reports Server (NTRS)

Churchill, G. B.; Dugan, D. C.

1982-01-01

The effective use of simulation from issuance of the request for proposal through conduct of a flight test program for the XV-15 Tilt Rotor Research Aircraft is discussed. From program inception, simulation complemented all phases of XV-15 development. The initial simulation evaluations during the source evaluation board proceedings contributed significantly to performance and stability and control evaluations. Eight subsequent simulation periods provided major contributions in the areas of control concepts; cockpit configuration; handling qualities; pilot workload; failure effects and recovery procedures; and flight boundary problems and recovery procedures. The fidelity of the simulation also made it a valuable pilot training aid, as well as a suitable tool for military and civil mission evaluations. Simulation also provided valuable design data for refinement of automatic flight control systems. Throughout the program, fidelity was a prime issue and resulted in unique data and methods for fidelity evaluation which are presented and discussed.

Vocabulary Development and Maintenance--Descriptors. ERIC Processing Manual, Section VIII (Part 1).

ERIC Educational Resources Information Center

Houston, Jim, Ed.

Comprehensive rules, guidelines, and examples are provided for use by ERIC indexers and lexicographers in developing and maintaining the "Thesaurus of ERIC Descriptors." Evaluation and decision criteria, research procedures, and inputting details for adding new Descriptors are documented. Instructions for modifying existing Thesaurus…

DEVELOPING RELATIVE POTENCY FACTORS FOR PESTICIDE MIXTURES: BIOSTATISTICAL ANALYSES OF JOINT DOSE-RESPONSE

EPA Science Inventory

The 1996 Food Quality Protection Act (FQPA) and the 1996 Safe Drinking Water Act Amendments (SDWAA) reaffirm previous Acts that mandate the EPA to evaluate risks posed by environmental chemical mixtures. The current report develops biological concepts and statistical procedures f...

EVALUATION OF AN ENZYME-LINKED IMMUNOSORBENT ASSAY FOR BIOLOGICAL MONITORING OF 3-PHENOXYBENZOIC ACID IN URINE

EPA Science Inventory

Abstract describes the development of an enzyme-linked immunosorbent assay (ELISA) method for monitoring 2,4-dichlorophenoxyacetic acid (2,4-D exposures). The ELISA is compared with a gas chromatograhy/mass spectrometry procedure. ELISA method development steps and comparative ...

Case Studies of Five Teacher Supervision/Evaluation Systems.

ERIC Educational Resources Information Center

Patrick, Edward M.; Dawson, Judith A.

In the 1984-85 school year, the Pennsylvania Department of Education (PDE) began to actively encourage Pennsylvania school districts to reform their teacher supervision/evaluation (TS/E) procedures. To obtain data necessary for developing TS/E models, the PDE commissioned Research for Better Schools (RBS) to conduct a study of five school…

The Clinical Teacher for Special Education. Final Report: Volume II; Evaluating the Model.

ERIC Educational Resources Information Center

Schwartz, Louis; Oseroff, Andrew

Effectiveness of the clinical teaching model (CTM) developed at Florida State University is documented in Volume II of the project's final report. Reviewed is literature related to teacher effectiveness and conceptual changes, conceptual models and instructional systems, and evaluation research in education. Research design and procedures are…

Trustworthiness in Evaluation Practice: An Emphasis on the Relational

ERIC Educational Resources Information Center

Rallis, Sharon F.; Rossman, Gretchen B.; Gajda, Rebecca

2007-01-01

As canons for trustworthiness developed explicitly in the discourse of qualitative inquiry, the emphasis was on procedural matters rather than fundamentally relational ones. A nod was made to the relational in such strategies as "member checks" but the issues of how the evaluator actually relates to participants and to the larger communities of…

Evaluation of Scale Reliability with Binary Measures Using Latent Variable Modeling

ERIC Educational Resources Information Center

Raykov, Tenko; Dimitrov, Dimiter M.; Asparouhov, Tihomir

2010-01-01

A method for interval estimation of scale reliability with discrete data is outlined. The approach is applicable with multi-item instruments consisting of binary measures, and is developed within the latent variable modeling methodology. The procedure is useful for evaluation of consistency of single measures and of sum scores from item sets…

Aligning "TextEvaluator"® Scores with the Accelerated Text Complexity Guidelines Specified in the Common Core State Standards. Research Report. ETS RR-15-21

ERIC Educational Resources Information Center

Sheehan, Kathleen M.

2015-01-01

The "TextEvaluator"® text analysis tool is a fully automated text complexity evaluation tool designed to help teachers, curriculum specialists, textbook publishers, and test developers select texts that are consistent with the text complexity guidelines specified in the Common Core State Standards.This paper documents the procedure used…

M109 Family of Vehicles, Paladin Integrated Management (PIM): Operational Assessment of the Initial Operational Test and Evaluation (IOT and E)

DTIC Science & Technology

2017-01-01

procedures and Army doctrine. During pre -IOT&E training and developmental testing , the combat developer discovered that when projectiles were fired using...Director, Operational Test and Evaluation M109 Family of Vehicles, Paladin Integrated Management (PIM) Operational Assessment of the...Initial Operational Test and Evaluation October 2011 January 2017 J. Michael Gilmore Director

Project W-314 specific test and evaluation plan for transfer line SN-633 (241-AX-B to 241-AY-02A)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hays, W.H.

1998-03-20

The purpose of this Specific Test and Evaluation Plan (STEP) is to provide a detailed written plan for the systematic testing of modifications made by the addition of the SN-633 transfer line by the W-314 Project. The STEP develops the outline for test procedures that verify the system`s performance to the established Project design criteria. The STEP is a lower tier document based on the W-314 Test and Evaluation Plan (TEP). This STEP encompasses all testing activities required to demonstrate compliance to the project design criteria as it relates to the addition of transfer line SN-633. The Project Design Specificationsmore » (PDS) identify the specific testing activities required for the Project. Testing includes Validations and Verifications (e.g., Commercial Grade Item Dedication activities), Factory Acceptance Tests (FATs), installation tests and inspections, Construction Acceptance Tests (CATs), Acceptance Test Procedures (ATPs), Pre-Operational Test Procedures (POTPs), and Operational Test Procedures (OTPs). It should be noted that POTPs are not required for testing of the transfer line addition. The STEP will be utilized in conjunction with the TEP for verification and validation.« less

Performance analysis of a film dosimetric quality assurance procedure for IMRT with regard to the employment of quantitative evaluation methods.

PubMed

Winkler, Peter; Zurl, Brigitte; Guss, Helmuth; Kindl, Peter; Stuecklschweiger, Georg

2005-02-21

A system for dosimetric verification of intensity-modulated radiotherapy (IMRT) treatment plans using absolute calibrated radiographic films is presented. At our institution this verification procedure is performed for all IMRT treatment plans prior to patient irradiation. Therefore clinical treatment plans are transferred to a phantom and recalculated. Composite treatment plans are irradiated to a single film. Film density to absolute dose conversion is performed automatically based on a single calibration film. A software application encompassing film calibration, 2D registration of measurement and calculated distributions, image fusion, and a number of visual and quantitative evaluation utilities was developed. The main topic of this paper is a performance analysis for this quality assurance procedure, with regard to the specification of tolerance levels for quantitative evaluations. Spatial and dosimetric precision and accuracy were determined for the entire procedure, comprising all possible sources of error. The overall dosimetric and spatial measurement uncertainties obtained thereby were 1.9% and 0.8 mm respectively. Based on these results, we specified 5% dose difference and 3 mm distance-to-agreement as our tolerance levels for patient-specific quality assurance for IMRT treatments.

Soundwalk approach to identify urban soundscapes individually.

PubMed

Jeon, Jin Yong; Hong, Joo Young; Lee, Pyoung Jik

2013-07-01

This study proposes a soundwalk procedure for evaluating urban soundscapes. Previous studies, which adopted soundwalk methodologies for investigating participants' responses to visual and acoustic environments, were analyzed considering type, evaluation position, measurement, and subjective assessment. An individual soundwalk procedure was then developed based on asking individual subjects to walk and select evaluation positions where they perceived any positive or negative characteristics of the urban soundscape. A case study was performed in urban spaces and the results were compared with those of the group soundwalk to validate the individual soundwalk procedure. Thirty subjects (15 architects and 15 acousticians) participated in the soundwalk. During the soundwalk, the subjects selected a total of 196 positions, and those were classified into 4 groups. It was found that soundscape perceptions were dominated by acoustic comfort, visual images, and openness. It was also revealed that perceived elements of the acoustic environment and visual image differed across classified soundscape groups, and there was a difference between architects and acousticians in terms of how they described their impressions of the soundscape elements. The results show that the individual soundwalk procedure has advantages for measuring diverse subjective responses and for obtaining the perceived elements of the urban soundscape.

Marshall Space Flight Center head development program

NASA Technical Reports Server (NTRS)

Harrer, Jim

1994-01-01

This report summarizes the results of the candidate head evaluation for the new long-life magnetic head per the SOW of Contract No. NAS8-39407, MSFC Head Development Program. The original program plans were to test a candidate head, fabricate a new head, then qualify the new head. These activities were scheduled to be carried out between March 1993 and March 1994. The program was halted after the evaluation of the candidate head by NAS8-39407 Amendment No. 4. MSFC has provided and authorized the use the MARS-2000 SRB QUAL Recorder PN 10400-0677-801 - Serial Number 200004 (Datatape PN 591000 - Serial Number 1004), Reproduce Amplifier Module (RAM) Datatape PN 533040 - Serial Number 2006, associated cables, and magnetic tape on special SRB/DFI tapered reels to Datatape for this program. All the testing that has been done for the candidate head evaluation was done at Datatape's facility in Pasadena,CA. The testing was performed in a Class 100,000 particle counts clean room at ambient temperature, except for the thermal testing which was conducted in a different area at Datatape. The Performance Verification Test Procedure PVT-11004-4 (PVT) and Acceptance Test Procedure ATP-11004-09 (ATP) procedures were used when tests were conducted on the recorder.

Development of code evaluation criteria for assessing predictive capability and performance

NASA Technical Reports Server (NTRS)

Lin, Shyi-Jang; Barson, S. L.; Sindir, M. M.; Prueger, G. H.

1993-01-01

Computational Fluid Dynamics (CFD), because of its unique ability to predict complex three-dimensional flows, is being applied with increasing frequency in the aerospace industry. Currently, no consistent code validation procedure is applied within the industry. Such a procedure is needed to increase confidence in CFD and reduce risk in the use of these codes as a design and analysis tool. This final contract report defines classifications for three levels of code validation, directly relating the use of CFD codes to the engineering design cycle. Evaluation criteria by which codes are measured and classified are recommended and discussed. Criteria for selecting experimental data against which CFD results can be compared are outlined. A four phase CFD code validation procedure is described in detail. Finally, the code validation procedure is demonstrated through application of the REACT CFD code to a series of cases culminating in a code to data comparison on the Space Shuttle Main Engine High Pressure Fuel Turbopump Impeller.

Evaluation of management measures of software development. Volume 1: Analysis summary

NASA Technical Reports Server (NTRS)

Page, J.; Card, D.; Mcgarry, F.

1982-01-01

The conceptual model, the data classification scheme, and the analytic procedures are explained. The analytic results are summarized and specific software measures for collection and monitoring are recommended.

EVA Training and Development Facilities

NASA Technical Reports Server (NTRS)

Cupples, Scott

2016-01-01

Overview: Vast majority of US EVA (ExtraVehicular Activity) training and EVA hardware development occurs at JSC; EVA training facilities used to develop and refine procedures and improve skills; EVA hardware development facilities test hardware to evaluate performance and certify requirement compliance; Environmental chambers enable testing of hardware from as large as suits to as small as individual components in thermal vacuum conditions.

Grindability determination of torrefied biomass materials using the Hybrid Work index

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Essendelft, D.T.; Zhou, X.; Kang, B.S.-J.

2012-01-01

The grindability of torrefied biomass materials is a difficult parameter to evaluate due to its inhomogeneous character and non-uniform morphology. However, it is necessary to develop a grinding test that is representative of the wide ranging character of biomass and torrefied biomass materials. Previous research has shown that Resistance to Impact Milling (RIM) can be linearly correlated to thermally driven weight loss in biomass. In particular, the RIM equipment was found to supply the right energy level to physically break down structurally deficient biomass materials while leaving the un-touched material relatively intact [1–3]. However, the RIM procedure was not designedmore » to extract the comminution energy. Alternatively, the Bond Work Index (BWI) procedure was developed to accurately assess the grinding energy of brittle materials [4,5]. However, the milling energy is too low to be effective for biomass comminution. In this research, the BWI procedure was utilized with the ball–mill approach in the RIM test to evaluate torrefied biomass materials. The hybridized procedure has been shown to be both highly correlated to energy consumption and sensitive to degree of torrefaction. The proposed Hybrid Work Index (HWI) is certainly useful for assessing torrefaction in a laboratory environment, but it may also be correlated to grinding energy at industrial scales.« less

Using tablet technology and instructional videos to enhance preclinical dental laboratory learning.

PubMed

Gadbury-Amyot, Cynthia C; Purk, John H; Williams, Brian Joseph; Van Ness, Christopher J

2014-02-01

The purpose of this pilot study was to examine if tablet technology with accompanying instructional videos enhanced the teaching and learning outcomes in a preclinical dental laboratory setting. Two procedures deemed most challenging in Operative Dentistry II were chosen for the development of instructional videos. A random sample of thirty students was chosen to participate in the pilot. Comparison of faculty evaluations of the procedures between the experimental (tablet) and control (no tablet) groups resulted in no significant differences; however, there was a trend toward fewer failures in the experimental group. Examination of the ability to accurately self-assess was compared by exploring correlations between faculty and student evaluations. While correlations were stronger in the experimental group, the control group had significant correlations for all three procedures, while the experimental group had significant correlations on only two of the procedures. Students strongly perceived that the tablets and videos helped them perform better and more accurately self-assess their work products. Students did not support requiring that they purchase/obtain a specific brand of technology. As a result of this pilot study, further development of ideal and non-ideal videos are in progress, and the school will be implementing a "Bring Your Own Device" policy with incoming students.

Comparison of three methods for determination of N-nitrosopyrrolidine in fried dry-cured bacon.

PubMed

Gates, R A; Pensabene, J W; Fiddler, W

1984-01-01

The recently developed Eastern Regional Research Center ( ERRC ) dry column chromatographic procedure for determining N-nitrosopyrrolidine (NPYR) in fried cure-pumped bacon was evaluated for its applicability to fried dry-cured bacon. The method was then compared with 2 established procedures for volatile nitrosamine analysis in cured meat products: the multidetection thermal energy analyzer (MD) method and the mineral oil distillation (MOD) screening procedure. No significant difference (P less than 0.05) in NPYR values was found between the ERRC and MD procedures, but significant differences were found between the ERRC and MOD procedures and between the MOD and MD procedures. No artifactual nitrosamine formation was found in the ERRC procedure, but significant amounts were found in samples analyzed by the MOD procedure. The ERRC method was demonstrated to be rugged and very rapid. It is proposed that the ERRC method replace the MOD method as the official screening procedure for NPYR in fried bacon.

Procedures for testing and evaluating spacecraft-type heat pipes

NASA Astrophysics Data System (ADS)

Tower, L. K.; Kaufman, W. B.

1984-04-01

This report describes part of an effort to develop dependable, cost effective spacecraft thermal control heat pipes. In the program the reliability and performance of 30 commercially available heat pipes were assessed. The pipes comprised 10 groups of varying design, with aluminum and stainless steel as structural materials, and methanol and ammonia as working fluids. The factors studied were noncondensible gas accumulation and heat transfer capability in one g. The present report supplements a brief earlier report by describing in detail the procedures required to conduct a comprehensive evaluation of heat pipes for thermal control. It discusses the test facilities and testing procedures. The manner in which data may be taken for estimating useful life and comparing performance is described. Some of the pitfalls in making such judgments are illustrated. Originator supplied keywords include: heat transfer, and corrosion.

Development of a Tomography Technique for Assessment of the Material Condition of Concrete Using Optimized Elastic Wave Parameters.

PubMed

Chai, Hwa Kian; Liu, Kit Fook; Behnia, Arash; Yoshikazu, Kobayashi; Shiotani, Tomoki

2016-04-16

Concrete is the most ubiquitous construction material. Apart from the fresh and early age properties of concrete material, its condition during the structure life span affects the overall structural performance. Therefore, development of techniques such as non-destructive testing which enable the investigation of the material condition, are in great demand. Tomography technique has become an increasingly popular non-destructive evaluation technique for civil engineers to assess the condition of concrete structures. In the present study, this technique is investigated by developing reconstruction procedures utilizing different parameters of elastic waves, namely the travel time, wave amplitude, wave frequency, and Q-value. In the development of algorithms, a ray tracing feature was adopted to take into account the actual non-linear propagation of elastic waves in concrete containing defects. Numerical simulation accompanied by experimental verifications of wave motion were conducted to obtain wave propagation profiles in concrete containing honeycomb as a defect and in assessing the tendon duct filling of pre-stressed concrete (PC) elements. The detection of defects by the developed tomography reconstruction procedures was evaluated and discussed.

Synergistic Interactions Between Direct and Indirect Bypasses in Combined Procedures: The Significance of Indirect Bypasses in Moyamoya Disease.

PubMed

Uchino, Haruto; Kim, Jae-Hoon; Fujima, Noriyuki; Kazumata, Ken; Ito, Masaki; Nakayama, Naoki; Kuroda, Satoshi; Houkin, Kiyohiro

2017-02-01

Whether additional indirect bypasses effectively contribute to revascularization in combined procedures remains unclear in patients with moyamoya disease. To evaluate the longitudinal changes associated with combined procedures while following up pediatric and adult patients long term and to assess whether any other clinical factors or hemodynamic parameters affected these changes to determine an optimal surgical strategy. We studied 58 hemispheres in 43 adults and 39 hemispheres in 26 children who underwent combined revascularization for moyamoya disease. To evaluate bypass development, we assessed the sizes of the superficial temporal artery and middle meningeal artery using magnetic resonance angiography. Multivariate analysis determined the effects of multiple variables on bypass development. Indirect bypass (middle meningeal artery) development occurred in 95% and 78% of the pediatric and adult hemispheres, respectively. Of these, dual development of direct and indirect bypasses occurred in 54% of the pediatric hemispheres and in 47% of the adult hemispheres. Reciprocal superficial temporal artery regression occurred in 28% of the hemispheres during the transition from the postoperative acute phase to the chronic phase during indirect bypass development. Good indirect bypass development was associated with adult hemispheres at Suzuki stage 4 or greater (odds ratio, 7.4; 95% confidence interval, 1.4-39.4; P = .02). Disease onset type and preoperative hemodynamic parameters were not considered predictors for the development of surgical revascularization. Simultaneous direct and indirect bypass development was most frequently observed, regardless of patient age and hemodynamic status. Applying indirect bypass as an adjunct to direct bypass could maximize revascularization in adults and children.

Development of an Instrument to Evaluate the Knowledge of Elementary Teachers about Venereal Disease.

ERIC Educational Resources Information Center

Schmidt, Norma G.

The purpose of this study was to develop a valid, reliable test to measure the knowledge of elementary school teachers about venereal disease. Recommended scientific test construction procedures were carefully followed. These included the development of a content outline and a table of specification; submitting potential test items to a review…

Development and Evaluation of an Adaptive Computerized Training System (ACTS). R&D Report 78-1.

ERIC Educational Resources Information Center

Knerr, Bruce W.; Nawrocki, Leon H.

This report describes the development of a computer based system designed to train electronic troubleshooting procedures. The ACTS uses artificial intelligence techniques to develop models of student and expert troubleshooting behavior as they solve a series of troubleshooting problems on the system. Comparisons of the student and expert models…

The future of wind tunnel technology in Germany

NASA Technical Reports Server (NTRS)

Ewald, B.

1978-01-01

The practical value of a wind tunnel which is not dependent solely on size or achievable Reynolds number was examined. Measurement, interpretative and evaluative procedures developed in small facilities were also studied.

Automated single-slide staining system

NASA Technical Reports Server (NTRS)

Mills, S. M.; Wilkins, J. R.

1974-01-01

Apparatus developed to Gram-stain single slides automatically is flexible enough to accommodate other types of staining procedures. Method frees operator and eliminates necessity for subjective evaluations as to length of staining or decolorizing time.

Responsible innovation in port development: the Rotterdam Maasvlakte 2 and the Dalian Dayao Bay extension projects.

PubMed

Ravesteijn, Wim; Liu, Yi; Yan, Ping

2015-01-01

The paper outlines and specifies 'responsible port innovation', introducing the development of a methodological and procedural step-by-step plan for the implementation and evaluation of (responsible) innovations. Subsequently, it uses this as a guideline for the analysis and evaluation of two case-studies. The construction of the Rotterdam Maasvlakte 2 Port meets most of the formulated requirements, though making values more explicit and treating it as a process right from the start could have benefitted the project. The Dalian Dayao Port could improve its decision-making procedures in several respects, including the introduction of new methods to handle value tensions. Both projects show that public support is crucial in responsible port innovation and that it should be not only a multi-faceted but also a multi-level strategy.

UK guidelines on oesophageal dilatation in clinical practice

PubMed Central

Sami, Sarmed S; Haboubi, Hasan N; Ang, Yeng; Boger, Philip; Bhandari, Pradeep; de Caestecker, John; Griffiths, Helen; Haidry, Rehan; Patel, Praful; Paterson, Stuart; Ragunath, Krish; Watson, Peter; Siersema, Peter D; Attwood, Stephen E

2018-01-01

These are updated guidelines which supersede the original version published in 2004. This work has been endorsed by the Clinical Services and Standards Committee of the British Society of Gastroenterology (BSG) under the auspices of the oesophageal section of the BSG. The original guidelines have undergone extensive revision by the 16 members of the Guideline Development Group with representation from individuals across all relevant disciplines, including the Heartburn Cancer UK charity, a nursing representative and a patient representative. The methodological rigour and transparency of the guideline development processes were appraised using the revised Appraisal of Guidelines for Research and Evaluation (AGREE II) tool. Dilatation of the oesophagus is a relatively high-risk intervention, and is required by an increasing range of disease states. Moreover, there is scarcity of evidence in the literature to guide clinicians on how to safely perform this procedure. These guidelines deal specifically with the dilatation procedure using balloon or bougie devices as a primary treatment strategy for non-malignant narrowing of the oesophagus. The use of stents is outside the remit of this paper; however, for cases of dilatation failure, alternative techniques—including stents—will be listed. The guideline is divided into the following subheadings: (1) patient preparation; (2) the dilatation procedure; (3) aftercare and (4) disease-specific considerations. A systematic literature search was performed. The Grading of Recommendations Assessment, Develop­ment and Evaluation (GRADE) tool was used to evaluate the quality of evidence and decide on the strength of recommendations made. PMID:29478034

Evaluation of a novel semi-automated HPLC procedure for whole blood cyclosporin A confirms equivalence to adjusted monoclonal values from Abbott TDx.

PubMed

Roberts, Norman B; Dutton, John; Higgins, Gerald; Allars, Lesley

2005-01-01

The problem in the measurement of cyclosporin (CyA) is that the widely used immuno-based assays suffer from interference by metabolites present in unpredictable excess. To resolve this, the consensus view has been to develop more specific and robust procedures for the measurement of CyA alone in order to give values similar to those obtained by HPLC. We developed an alternative strategy based on Abbott poly- and monoclonal assays to derive an adjusted monoclonal value as an equivalent measurement to HPLC. We have now evaluated a recently developed semi-automated HPLC procedure and used it to test the validity of the adjusted monoclonal value. The automated HPLC procedure with online clean-up was optimised for the separation of CyA and internal standard CyD. The assay was simple to use, precise and gave good recovery of cyclosporin from whole blood. Comparisons with the more specific immunoassays Abbott AxSym and EMIT showed close agreement, whereas Abbott monoclonal values indicated up to 20% positive bias. In contrast, the adjusted monoclonal values gave good agreement with HPLC. Data obtained from HPLC linked to tandem mass spectrometry (MS) indicated closer agreement with Abbott monoclonal values than expected, suggesting some positive bias with MS. The benefit of using an adjusted monoclonal value is that a result equivalent to HPLC is obtained, as well as an indication of the concentration of metabolites from the Abbott polyclonal measurement.

A Checklist to Improve Patient Safety in Interventional Radiology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koetser, Inge C. J.; Vries, Eefje N. de; Delden, Otto M. van

2013-04-15

To develop a specific RADiological Patient Safety System (RADPASS) checklist for interventional radiology and to assess the effect of this checklist on health care processes of radiological interventions. On the basis of available literature and expert opinion, a prototype checklist was developed. The checklist was adapted on the basis of observation of daily practice in a tertiary referral centre and evaluation by users. To assess the effect of RADPASS, in a series of radiological interventions, all deviations from optimal care were registered before and after implementation of the checklist. In addition, the checklist and its use were evaluated by interviewingmore » all users. The RADPASS checklist has two parts: A (Planning and Preparation) and B (Procedure). The latter part comprises checks just before starting a procedure (B1) and checks concerning the postprocedural care immediately after completion of the procedure (B2). Two cohorts of, respectively, 94 and 101 radiological interventions were observed; the mean percentage of deviations of the optimal process per intervention decreased from 24 % before implementation to 5 % after implementation (p < 0.001). Postponements and cancellations of interventions decreased from 10 % before implementation to 0 % after implementation. Most users agreed that the checklist was user-friendly and increased patient safety awareness and efficiency. The first validated patient safety checklist for interventional radiology was developed. The use of the RADPASS checklist reduced deviations from the optimal process by three quarters and was associated with less procedure postponements.« less

In-Service Training and Development Programs for Accountants in Business and Industry.

ERIC Educational Resources Information Center

Adams, Hobart Warren

A survey was made of inservice training and development for accountants in 53 selected business firms varying in products, sales volume, and employees. Program philosophy and objectives, qualifications and selection of trainees and instructors, program content, instructional programs, and evaluation procedures were examined. Inservice programs,…

Guidelines and Criteria for the Search Strategy, Evaluation, Selection, and Documentation of Key Data and Supporting Data Used for the Derivation of AEGL Values

EPA Pesticide Factsheets

This is Section 2.3 of the Standing Operating Procedures for Developing Acute Exposure Guideline Levels (AEGLs) for Hazardous Chemicals. It discusses methodologies used to search for and select data for development of AEGL values.

Development, implementation and evaluation of a countermeasure program for alcohol-involved pedestrian crashes

DOT National Transportation Integrated Search

2000-07-01

The objectives of this study were to analyze the pedestrian alcohol problem in a community and to develop and apply procedures to counter the problem. The City of Baltimore was selected as the test city. It was estimated that approximately 40% of the...

WAVAI Curriculum Guide for Instruction in Wisconsin High Schools. 1975 Revision. Bulletin No. 5011.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison. Bureau for Career and Manpower Development.

This guide is designed to aid the development of vocational education programs in agriculture in local school districts. Major program objectives, good learning conditions, program evaluation, suggested teaching methods, and Wisconsin's philosophy and procedures in developing occupational experience programs in vocational agriculture/agribusiness…

Research Ethics for Mental Health Science Involving Ethnic Minority Children and Youths.

ERIC Educational Resources Information Center

Fisher, Celia B.; Hoagwood, Kimberly; Boyce, Cheryl; Duster, Troy; Frank, Deborah A.; Grisso, Thomas; Levine, Robert J.; Macklin, Ruth; Spencer, Margaret Beale; Takanishi, Ruby; Trimble, Joseph E.; Zayas, Luis H.

2002-01-01

Summarizes key recommendations resulting from a meeting of national leaders in bioethics, multicultural research, and ethnic minority mental health. The recommendations focus on applying a cultural perspective to the evaluation of research risks and benefits; developing and implementing respectful informed consent procedures; developing and…

A new measure of dietary social support among African American adolescents

USDA-ARS?s Scientific Manuscript database

The purpose of this research was to develop and evaluate a measure of social support for fruit and vegetable (FV) consumption among economically disadvantaged African American adolescents. Focus groups (N = 30) and pilot testing procedures (N = 17) were used to develop and pretest questionnaire item...

DESIGN AND DEVELOPMENT REPORT ON TREAT CONTROL ROD DRIVE II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Batch, R.V.

1961-05-01

A discussion is given of the development of TREAT control rod drive II, which describes the basic design, the problems involved with the design, the various design methods pursued, the testing procedures, and the evaluation of the performance characteristics of the final drive. (B.O.G.)

Using the arthroscopic surgery skill evaluation tool as a pass-fail examination.

PubMed

Koehler, Ryan J; Nicandri, Gregg T

2013-12-04

Examination of arthroscopic skill requires evaluation tools that are valid and reliable with clear criteria for passing. The Arthroscopic Surgery Skill Evaluation Tool was developed as a video-based assessment of technical skill with criteria for passing established by a panel of experts. The purpose of this study was to test the validity and reliability of the Arthroscopic Surgery Skill Evaluation Tool as a pass-fail examination of arthroscopic skill. Twenty-eight residents and two sports medicine faculty members were recorded performing diagnostic knee arthroscopy on a left and right cadaveric specimen in our arthroscopic skills laboratory. Procedure videos were evaluated with use of the Arthroscopic Surgery Skill Evaluation Tool by two raters blind to subject identity. Subjects were considered to pass the Arthroscopic Surgery Skill Evaluation Tool when they attained scores of ≥ 3 on all eight assessment domains. The raters agreed on a pass-fail rating for fifty-five of sixty videos rated with an interclass correlation coefficient value of 0.83. Ten of thirty participants were assigned passing scores by both raters for both diagnostic arthroscopies performed in the laboratory. Receiver operating characteristic analysis demonstrated that logging more than eighty arthroscopic cases or performing more than thirty-five arthroscopic knee cases was predictive of attaining a passing Arthroscopic Surgery Skill Evaluation Tool score on both procedures performed in the laboratory. The Arthroscopic Surgery Skill Evaluation Tool is valid and reliable as a pass-fail examination of diagnostic arthroscopy of the knee in the simulation laboratory. This study demonstrates that the Arthroscopic Surgery Skill Evaluation Tool may be a useful tool for pass-fail examination of diagnostic arthroscopy of the knee in the simulation laboratory. Further study is necessary to determine whether the Arthroscopic Surgery Skill Evaluation Tool can be used for the assessment of multiple arthroscopic procedures and whether it can be used to evaluate arthroscopic procedures performed in the operating room.

NASA Task Load Index (TLX). Volume 1.0; Paper and Pencil Package

NASA Technical Reports Server (NTRS)

Hart, Sandra G.

1986-01-01

This booklet contains the materials necessary to collect subjective workload assessments with the NASA Task Load Index. This procedure for collecting workload ratings was developed by the Human Performance Group at NASA Ames Research Center during a three year research effort that involved more than 40 laboratory. simulation. and inflight experiments. Although the technique is still undergoing evaluation. this booklet is being distributed to allow other researchers to use it in their own experiments. Comments or suggestions about the procedure would be greatly appreciated. This package is intended to fill a "nuts and bolts" function of describing the procedure. A bibliography provides background information about previous empirical findings and the logic that supports the procedure.

Characterization of PMR polyimide resin and prepreg

NASA Technical Reports Server (NTRS)

Lindenmeyer, P. H.; Sheppard, C. H.

1984-01-01

Procedures for the chemical characterization of PMR-15 resin solutions and graphite-reinforced prepregs were developed, and a chemical data base was established. In addition, a basic understanding of PMR-15 resin chemistry was gained; this was translated into effective processing procedures for the production of high quality graphite composites. During the program the PMR monomers and selected model compounds representative of postulated PMR-15 solution chemistry were acquired and characterized. Based on these data, a baseline PMR-15 resin was formulated and evaluated for processing characteristics and composite properties. Commercially available PMR-15 resins were then obtained and chemically characterized. Composite panels were fabricated and evaluated.

Use of repeat anterior maxillary distraction to correct residual midface hypoplasia in cleft patients.

PubMed

Richardson, Sunil; Krishna, Shreya; Bansal, Avi

2017-12-01

The study was designed to evaluate the efficacy of performing a second, repeat anterior maxillary distraction (AMD) to treat residual cleft maxillary hypoplasia. Five patients between the ages of 12 to 15 years with a history of AMD and with residual cleft maxillary hypoplasia were included in the study. Inclusion was irrespective of gender, type of cleft lip and palate, and the amount of advancement needed. Repeat AMD was executed in these patients 4 to 5 years after the primary AMD procedure to correct the cleft maxillary hypoplasia that had developed since the initial procedure. Orthopantomogram (OPG) and lateral cephalograms were taken for evaluation preoperatively, immediately after distraction, after consolidation, and one year postoperatively. The data obtained was tabulated and a Mann Whitney U-test was used for statistical comparisons. At the time of presentation, a residual maxillary hypoplasia was observed with a well maintained distraction gap on the OPG which ruled out the occurrence of a relapse. Favorable movement of the segments without any resistance was seen in all patients. Mean maxillary advancement of 10.56 mm was achieved at repeat AMD. Statistically significant increases in midfacial length, SNA angle, and nasion perpendicular to point A distance was achieved ( P =0.012, P =0.011, and P =0.012, respectively). Good profile was achieved for all patients. Minimal transient complications, for example anterior open bite and bleeding episodes, were managed. Addressing the problem of cleft maxillary hypoplasia at an early age (12-15 years) is beneficial for the child. Residual hypoplasia may develop in some patients, which may require additional corrective procedures. The results of our study show that AMD can be repeated when residual deformity develops with the previous procedure having no negative impact on the results of the repeat procedure.

34 CFR 300.304 - Evaluation procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Placements Evaluations and Reevaluations § 300.304 Evaluation procedures. (a) Notice. The public agency must... evaluation, the public agency must— (1) Use a variety of assessment tools and strategies to gather relevant... procedures. Each public agency must ensure that— (1) Assessments and other evaluation materials used to...

Pattern of venous collateral development after splenic vein occlusion in an extended Whipple procedure : comparison with collateral vein pattern in cases of sinistral portal hypertension.

PubMed

Strasberg, Steven M; Bhalla, Sanjeev; Sanchez, Luis A; Linehan, David C

2011-11-01

The risks of developing sinistral portal hypertension as a result of occlusion of the splenic vein close to its termination during a Whipple procedure are unclear. Our purpose was to compare the pattern of venous collateral development after splenic vein ligation in an extended Whipple procedure with the pattern of collateral development in cases of sinistral portal hypertension. Five patients underwent an extended Whipple procedure in which the splenic vein was divided and not reconstructed. Six to eight months later detailed mapping of venous return from the spleen was determined by contrast-enhanced multidetector computed tomography or in one case by 3D contrast-enhanced MRI. Spleen size and length of residual patent splenic vein were also measured. The literature on sinistral portal hypertension was evaluated to ascertain whether the venous collateral pattern in cases of left-sided portal hypertension was similar to the pattern that developed when the splenic vein was ligated at its termination in the Whipple procedure. A length of splenic vein remained patent in all five patients, measuring 4.5 to 11.5 cm from the spleen. Splenomegaly did not develop. Blood returned from the spleen by multiple collaterals including collaterals in the omentum and mesocolon. These types of collaterals do not develop in sinistral portal hypertension, nor is residual patent splenic vein seen. Ligation of the splenic vein close to its termination in five patients resulted in a pattern of venous return different from patients that have developed left-sided portal hypertension.

Surgery via natural orifices in human beings: yesterday, today, tomorrow.

PubMed

Moris, Demetrios N; Bramis, Konstantinos J; Mantonakis, Eleftherios I; Papalampros, Efstathios L; Petrou, Athanasios S; Papalampros, Alexandros E

2012-07-01

We performed an evaluation of models, techniques, and applicability to the clinical setting of natural orifice surgery (mainly natural orifice transluminal endoscopic surgery [NOTES]) primarily in general surgery procedures. NOTES has attracted much attention recently for its potential to establish a completely alternative approach to the traditional surgical procedures performed entirely through a natural orifice. Beyond the potentially scar-free surgery and abolishment of dermal incision-related complications, the safety and efficacy of this new surgical technology must be evaluated. Studies were identified by searching MEDLINE, EMBASE, Cochrane Library, and Entrez PubMed from 2007 to February 2011. Most of the references were identified from 2009 to 2010. There were limitations as far as the population that was evaluated (only human beings, no cadavers or animals) was concerned, but there were no limitations concerning the level of evidence of the studies that were evaluated. The studies that were deemed applicable for our review were published mainly from 2007 to 2010 (see Methods section). All the evaluated studies were conducted only in human beings. We studied the most common referred in the literature orifices such as vaginal, oral, gastric, esophageal, anal, or urethral. The optimal access route and method could not be established because of the different nature of each procedure. We mainly studied procedures in the field of general surgery such as cholecystectomy, intestinal cancers, renal cancers, appendectomy, mediastinoscopy, and peritoneoscopy. All procedures were feasible and most of them had an uneventful postoperative course. A number of technical problems were encountered, especially as far as pure NOTES procedures are concerned, which makes the need of developing new endoscopic instruments, to facilitate each approach, undeniable. NOTES is still in the early stages of development and more robust technologies will be needed to achieve reliable closure and overcome technical challenges. Well-designed studies in human beings need to be conducted to determine the safety and efficacy of NOTES in a clinical setting. Among these NOTES approaches, the transvaginal route seems less complicated because it virtually eliminates concerns for leakage and fistulas. The transvaginal approach further favors upper-abdominal surgeries because it provides better maneuverability to upper-abdominal organs (eg, liver, gallbladder, spleen, abdominal esophagus, and stomach). The stomach is considered one of the most promising targets because this large organ, once adequately mobilized, can be transected easily with a stapler. The majority of the approaches seem to be feasible even with the equipment used nowadays, but to achieve better results and wider applications to human beings, the need to develop new endoscopic instruments to facilitate each approach is necessary. Copyright © 2012 Elsevier Inc. All rights reserved.

Program management model study

NASA Technical Reports Server (NTRS)

Connelly, J. J.; Russell, J. E.; Seline, J. R.; Sumner, N. R., Jr.

1972-01-01

Two models, a system performance model and a program assessment model, have been developed to assist NASA management in the evaluation of development alternatives for the Earth Observations Program. Two computer models were developed and demonstrated on the Goddard Space Flight Center Computer Facility. Procedures have been outlined to guide the user of the models through specific evaluation processes, and the preparation of inputs describing earth observation needs and earth observation technology. These models are intended to assist NASA in increasing the effectiveness of the overall Earth Observation Program by providing a broader view of system and program development alternatives.

Dexterity optimization by port placement in robot-assisted minimally invasive surgery

NASA Astrophysics Data System (ADS)

Selha, Shaun; Dupont, Pierre; Howe, Robert D.; Torchiana, David F.

2002-02-01

A computer-based algorithm has been developed which uses preoperative images to provide a surgeon with a list of feasible port triplets ranked according to tool dexterity and endoscopic view quality at each surgical site involved in a procedure. A computer simulation allows the surgeon to select from among the proposed port locations. The procedure selected for the development of the system consists of a coronary artery bypass graft (CABG). In this procedure, the interior mammary artery (IMA) is mobilized from the interior chest wall, and one end is attached to the coronary arteries to provide a new blood supply for the heart. Approximately 10-20 cm is dissected free, using blunt dissection and a harmonic scalpel or electrocautery. At present, the port placement system is being evaluated in clinical trials.

The development and production of thermo-mechanically forged tool steel spur gears

NASA Technical Reports Server (NTRS)

Bamberger, E. N.

1973-01-01

A development program to establish the feasibility and applicability of high energy rate forging procedures to tool steel spur gears was performed. Included in the study were relatively standard forging procedures as well as a thermo-mechanical process termed ausforming. The subject gear configuration utilized was essentially a standard spur gear having 28 teeth, a pitch diameter of 3.5 inches and a diametral pitch of 8. Initially it had been planned to use a high contact ratio gear design, however, a comprehensive evaluation indicated that severe forging problems would be encountered as a result of the extremely small teeth required by this type of design. The forging studies were successful in achieving gear blanks having integrally formed teeth using both standard and thermo-mechanical forging procedures.

Reliability Stress-Strength Models for Dependent Observations with Applications in Clinical Trials

NASA Technical Reports Server (NTRS)

Kushary, Debashis; Kulkarni, Pandurang M.

1995-01-01

We consider the applications of stress-strength models in studies involving clinical trials. When studying the effects and side effects of certain procedures (treatments), it is often the case that observations are correlated due to subject effect, repeated measurements and observing many characteristics simultaneously. We develop maximum likelihood estimator (MLE) and uniform minimum variance unbiased estimator (UMVUE) of the reliability which in clinical trial studies could be considered as the chances of increased side effects due to a particular procedure compared to another. The results developed apply to both univariate and multivariate situations. Also, for the univariate situations we develop simple to use lower confidence bounds for the reliability. Further, we consider the cases when both stress and strength constitute time dependent processes. We define the future reliability and obtain methods of constructing lower confidence bounds for this reliability. Finally, we conduct simulation studies to evaluate all the procedures developed and also to compare the MLE and the UMVUE.

Development and evaluation of an off-the-slide genotyping technique for identifying Giardia cysts and Cryptosporidium oocysts directly from US EPA Method 1623 slides.

PubMed

Ware, M W; Keely, S P; Villegas, E N

2013-07-01

This study developed and systematically evaluated performance and limit of detection of an off-the-slide genotyping procedure for both Cryptosporidium oocysts and Giardia cysts. Slide standards containing flow-sorted (oo)cysts were used to evaluate the off-the-slide genotyping procedure by microscopy and PCR. Results show approximately 20% of cysts and oocysts are lost during staining. Although transfer efficiency from the slide to the PCR tube could not be determined by microscopy, it was observed that the transfer process aided in the physical lysis of the (oo)cysts likely releasing DNA. PCR detection rates for a single event on a slide were 44% for Giardia and 27% for Cryptosporidium, and a minimum of five cysts and 20 oocysts are required to achieve a 90% PCR detection rate. A Poisson distribution analysis estimated the relative PCR target densities and limits of detection, it showed that 18 Cryptosporidium and five Giardia replicates are required for a 95% probability of detecting a single (oo)cyst on a slide. This study successfully developed and evaluated recovery rates and limits of detection of an off-the-slide genotyping procedure for both Cryptosporidium and Giardia (oo)cysts from the same slide. This off-the-slide genotyping technique is a simple and low cost tool that expands the applications of US EPA Method 1623 results by identifying the genotypes and assemblages of the enumerated Cryptosporidium and Giardia. This additional information will be useful for microbial risk assessment models and watershed management decisions. Journal of Applied Microbiology Published [2013]. This article is a U.S. Government work and is in the public domain in the USA.

Evaluation of Geographic Indices Describing Health Care Utilization.

PubMed

Kim, Agnus M; Park, Jong Heon; Kang, Sungchan; Kim, Yoon

2017-01-01

The accurate measurement of geographic patterns of health care utilization is a prerequisite for the study of geographic variations in health care utilization. While several measures have been developed to measure how accurately geographic units reflect the health care utilization patterns of residents, they have been only applied to hospitalization and need further evaluation. This study aimed to evaluate geographic indices describing health care utilization. We measured the utilization rate and four health care utilization indices (localization index, outflow index, inflow index, and net patient flow) for eight major procedures (coronary artery bypass graft surgery, percutaneous transluminal coronary angioplasty, surgery after hip fracture, knee replacement surgery, caesarean sections, hysterectomy, computed tomography scans, and magnetic resonance imaging scans) according to three levels of geographic units in Korea. Data were obtained from the National Health Insurance database in Korea. We evaluated the associations among the health care utilization indices and the utilization rates. In higher-level geographic units, the localization index tended to be high, while the inflow index and outflow index were lower. The indices showed different patterns depending on the procedure. A strong negative correlation between the localization index and the outflow index was observed for all procedures. Net patient flow showed a moderate positive correlation with the localization index and the inflow index. Health care utilization indices can be used as a proxy to describe the utilization pattern of a procedure in a geographic unit.

Information Quality in Regulatory Decision Making: Peer Review versus Good Laboratory Practice.

PubMed

McCarty, Lynn S; Borgert, Christopher J; Mihaich, Ellen M

2012-07-01

There is an ongoing discussion on the provenance of toxicity testing data regarding how best to ensure its validity and credibility. A central argument is whether journal peer-review procedures are superior to Good Laboratory Practice (GLP) standards employed for compliance with regulatory mandates. We sought to evaluate the rationale for regulatory decision making based on peer-review procedures versus GLP standards. We examined pertinent published literature regarding how scientific data quality and validity are evaluated for peer review, GLP compliance, and development of regulations. Some contend that peer review is a coherent, consistent evaluative procedure providing quality control for experimental data generation, analysis, and reporting sufficient to reliably establish relative merit, whereas GLP is seen as merely a tracking process designed to thwart investigator corruption. This view is not supported by published analyses pointing to subjectivity and variability in peer-review processes. Although GLP is not designed to establish relative merit, it is an internationally accepted quality assurance, quality control method for documenting experimental conduct and data. Neither process is completely sufficient for establishing relative scientific soundness. However, changes occurring both in peer-review processes and in regulatory guidance resulting in clearer, more transparent communication of scientific information point to an emerging convergence in ensuring information quality. The solution to determining relative merit lies in developing a well-documented, generally accepted weight-of-evidence scheme to evaluate both peer-reviewed and GLP information used in regulatory decision making where both merit and specific relevance inform the process.

Improving Building Energy Simulation Programs Through Diagnostic Testing (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-02-01

New test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools that calculate optimal packages of efficiency measures. To improve the accuracy of energy analysis for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team developed the Building Energy Simulation Test for Existing Homes (BESTEST-EX), a method for diagnosing and correcting errors in building energy audit software and calibration procedures. BESTEST-EX consists of building physics and utility billmore » calibration test cases, which software developers can use to compare their tools simulation findings to reference results generated with state-of-the-art simulation tools. Overall, the BESTEST-EX methodology: (1) Tests software predictions of retrofit energy savings in existing homes; (2) Ensures building physics calculations and utility bill calibration procedures perform to a minimum standard; and (3) Quantifies impacts of uncertainties in input audit data and occupant behavior. BESTEST-EX is helping software developers identify and correct bugs in their software, as well as develop and test utility bill calibration procedures.« less

Optimal Parameters for Intervertebral Disk Resection Using Aqua-Plasma Beams.

PubMed

Yoon, Sung-Young; Kim, Gon-Ho; Kim, Yushin; Kim, Nack Hwan; Lee, Sangheon; Kawai, Christina; Hong, Youngki

2018-06-14

 A minimally invasive procedure for intervertebral disk resection using plasma beams has been developed. Conventional parameters for the plasma procedure such as voltage and tip speed mainly rely on the surgeon's personal experience, without adequate evidence from experiments. Our objective was to determine the optimal parameters for plasma disk resection.  Rate of ablation was measured at different procedural tip speeds and voltages using porcine nucleus pulposi. The amount of heat formation during experimental conditions was also measured to evaluate the thermal safety of the plasma procedure.  The ablation rate increased at slower procedural speeds and higher voltages. However, for thermal safety, the optimal parameters for plasma procedures with minimal tissue damage were an electrical output of 280 volts root-mean-square (V rms ) and a procedural tip speed of 2.5 mm/s.  Our findings provide useful information for an effective and safe plasma procedure for disk resection in a clinical setting. Georg Thieme Verlag KG Stuttgart · New York.

A Graphical Approach to Evaluating Equating Using Test Characteristic Curves

ERIC Educational Resources Information Center

Wyse, Adam E.; Reckase, Mark D.

2011-01-01

An essential concern in the application of any equating procedure is determining whether tests can be considered equated after the tests have been placed onto a common scale. This article clarifies one equating criterion, the first-order equity property of equating, and develops a new method for evaluating equating that is linked to this…

Evaluation of Hydrogel Technologies for the Decontamination ...

EPA Pesticide Factsheets

Report This current research effort was developed to evaluate intermediate level (between bench-scale and large-scale or wide-area implementation) decontamination procedures, materials, technologies, and techniques used to remove radioactive material from different surfaces. In the event of such an incident, application of this technology would primarily be intended for decontamination of high-value buildings, important infrastructure, and landmarks.

The Use and Effectiveness of an Argumentation and Evaluation Intervention in Science Classes

ERIC Educational Resources Information Center

Bulgren, Janis A.; Ellis, James D.; Marquis, Janet G.

2014-01-01

This study explored teachers' use of the Argumentation and Evaluation Intervention (AEI) and associated graphic organizer to enhance the performance of students in middle and secondary science classrooms. The results reported here are from the third year of a design study during which the procedures were developed in collaboration with…

Evaluating growth performance of young stands

Treesearch

A. L. Roe; R. E. Benson

1966-01-01

A simple procedure for evaluating the diameter growth of young stands in relation to potential growth is described. A comparison technique is developed which contrasts relative diameter of crop trees to the relative diameter growth of the last decade to show the condition and trend of growth in the stand. The method is objective, easy to use, and has several...

Evaluative Criteria for High School Textbooks in Journalism and Mass Media.

ERIC Educational Resources Information Center

Campbell, Laurence R.

The purpose of this study was to develop criteria for high school textbooks in journalism and mass media. The study discusses the procedure used in evaluating textbooks; the role of textbooks in journalism and mass media courses; a general background of these courses; a review of objectives concerning the student journalist, the teenage writer,…

15-Year-Experience of a Knee Arthroscopist

PubMed Central

Tatari, Mehmet Hasan; Bektaş, Yunus Emre; Demirkıran, Demirhan; Ellidokuz, Hülya

2014-01-01

Objectives: Arthroscopic knee surgery is a an experience-demanding procedure throughout diagnostic and reconstructive parts. Altough the literature says that there must be no need for diagnostic arthroscopy today, most arthroscopic surgeons have gained experience and developed themselves by the help of diagnostic arthroscopy and some basic procedures like debridement and lavage. The purpose of this study was to observe what happenned in the 15-year-experience of an orthopaedic surgeon who deals with knee arthroscopy. The hypothesis was that the mean age of the patients, who have undergone arthroscopic procedures, would decrease, and the percentage of the diagnostic and debridement applications would diminish and reconstructive procedures would increase. Methods: For this purpose, 959 patients who have undergone knee arthroscopy in 15 years, were evaluated retrospectively. The gender, age, operation year and the procedure applied for the patients were enrolled on an Excel file. Chi-Square test was used for statistical evaluation. The patients were divided into three groups according to the year they were operated. Period 1 included the patients who were operated between the years 1999-2003, Period 2 between 2004-2008 and Period 3 between 2009-2013. According to their ages, the patients were evaluated in three groups; Group 1 included the patients ≤ 25 years old while Group 2 between 26-40 and Group 3 ≥ 41. Arthroscopic procedures were evaluated in three groups: Group X: meniscectomy, chondral debridement, lavage, synoviectomy, loose body removal. Group Y: ACL and PCL reconstruction, meniscal repair. Group Z: Microfracture, lateral release, meniscal normalization, second look arthroscopy, diagnostic arthroscopy before osteotomy. Results: Among all patients, 60 % was male and Group 3 (45.4 %) was the larger group in population. The procedures in Group X were used in most of the operations ( 59.2 %). The population of the patients in the periods increased gradually throughout the years: 24 % in Period 1, 36.6 % in Period 2 and 39.4 % in Period 3. While the population of Group 3 was higher than the others in the first two periods, Group 2 was the leader in the last period (p< 0.001). While male/female ratio was statistically insignificant in Periods 1 and 2, the number of the males in Period 3 was statistically higher than the females (p< 0.001). The procedures in Group Y were used significantly for males in Periods 2 and 3 (p< 0.001). The procedures in Group X were used significantly for females (p< 0.001) while the ones in Group Y were applied for males (p< 0.001). Among all arthroscopic procedures, Group X was the leader in Period 1 (85 %) but this frequency decreased throughout the years and the procedures in Group Y increased gradually more than twice consisting more than half of the procedures in Period 3 (p< 0.001). Conclusion: Throughout the years, the age of the patients, for whom arthroscopic procedures were done, and the percentage of debridement and diagnostic procedures have decreased, while the population of the patients and the number of the reconstructive procedures, especially for males, have increased. The results were statistically significant. In our opinion, this statistical conclusion must be the usual academic development of an orthopeadic surgeon who deals mostly with knee arthroscopy in his daily practice. This must be a guide for young arthroscopists.

76 FR 68769 - Bridging the Idea Development Evaluation Assessment and Long-Term Initiative and Total Product...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-07

... complementary methodological frameworks of the IDEAL and TPLC initiatives, more comprehensive and applicable... devices, surgical operations, and invasive medical procedures; Unique study designs and reporting methods...

Kidney cell electrophoresis

NASA Technical Reports Server (NTRS)

Todd, P.

1980-01-01

The following aspects of kidney cell electrophoresis are discussed: (1) the development and testing of electrophoresis solutions; (2) optimization of freezing and thawing; (3) procedures for evaluation of separated kidney cells; and (4) electrophoretic mobility characterization of kidney cells.

Kidney cell electrophoresis

NASA Technical Reports Server (NTRS)

Todd, P.

1979-01-01

A kidney cell electrophoresis technique is described in four parts: (1) the development and testing of electrophoresis solutions; (2) optimization of freezing and thawing; (3) procedures for evaluation of separated kidney cells; and (4) electrophoretic mobility characteristics of kidney cells.

Tests for early acceptance of concrete.

DOT National Transportation Integrated Search

1985-01-01

A literature survey and limited study of laboratory concretes were conducted to evaluate various methods for predicting concrete strengths at 28 days based on procedures for accelerated strength development or measurement of strength of normally cure...

Why Micros?

ERIC Educational Resources Information Center

Myers, Darlene

1983-01-01

Discusses development of the first computers; identifies five generations of computers; reviews projections for sales and proliferation of microcomputers into the marketplace; outlines procedures for selecting microcomputers and evaluating software; and reviews several articles on microcomputers centering on user requirements. (MBR)

The Conventional Bomber Force War-horses For Global Conflicts - Capabilities, Limitations, and Modernization

DTIC Science & Technology

1992-10-01

intelligence developed an authentic European conflict scenario based on WINTEX- CIMEX 󈨝, a detailed European command post exercise. One of the primary...them. The only exercises in which we effectively train from start to finish are the large CPXs like WINTEX/ CIMEX . This exercise is a procedural...general war CPX, sponsored by the Joint Chiefs of Staff. WINTEX/ CIMEX exercises. tests, and evaluates command and control procedures. planning. and

Reflecting Equity and Diversity. Part I: Guidelines and Procedure for Evaluating Bias in Instructional Materials. Part II: Bias Awareness Training Worksheets. Part III: Bias Awareness and Procedure Training Course.

ERIC Educational Resources Information Center

Bebermeyer, Jim; Edmond, Mary, Ed.

Reflecting a need to prepare students for working in diverse organizations, this document was developed to increase school officials' awareness of bias in instructional materials and help them select bias-free materials. A number of the examples illustrate situations dealing with diversity in the workplace. The guide is divided into three parts:…

The NBS Energy Model Assessment project: Summary and overview

NASA Astrophysics Data System (ADS)

Gass, S. I.; Hoffman, K. L.; Jackson, R. H. F.; Joel, L. S.; Saunders, P. B.

1980-09-01

The activities and technical reports for the project are summarized. The reports cover: assessment of the documentation of Midterm Oil and Gas Supply Modeling System; analysis of the model methodology characteristics of the input and other supporting data; statistical procedures undergirding construction of the model and sensitivity of the outputs to variations in input, as well as guidelines and recommendations for the role of these in model building and developing procedures for their evaluation.

The preprocessed connectomes project repository of manually corrected skull-stripped T1-weighted anatomical MRI data.

PubMed

Puccio, Benjamin; Pooley, James P; Pellman, John S; Taverna, Elise C; Craddock, R Cameron

2016-10-25

Skull-stripping is the procedure of removing non-brain tissue from anatomical MRI data. This procedure can be useful for calculating brain volume and for improving the quality of other image processing steps. Developing new skull-stripping algorithms and evaluating their performance requires gold standard data from a variety of different scanners and acquisition methods. We complement existing repositories with manually corrected brain masks for 125 T1-weighted anatomical scans from the Nathan Kline Institute Enhanced Rockland Sample Neurofeedback Study. Skull-stripped images were obtained using a semi-automated procedure that involved skull-stripping the data using the brain extraction based on nonlocal segmentation technique (BEaST) software, and manually correcting the worst results. Corrected brain masks were added into the BEaST library and the procedure was repeated until acceptable brain masks were available for all images. In total, 85 of the skull-stripped images were hand-edited and 40 were deemed to not need editing. The results are brain masks for the 125 images along with a BEaST library for automatically skull-stripping other data. Skull-stripped anatomical images from the Neurofeedback sample are available for download from the Preprocessed Connectomes Project. The resulting brain masks can be used by researchers to improve preprocessing of the Neurofeedback data, as training and testing data for developing new skull-stripping algorithms, and for evaluating the impact on other aspects of MRI preprocessing. We have illustrated the utility of these data as a reference for comparing various automatic methods and evaluated the performance of the newly created library on independent data.

Predicting Wanton Assault in a General Youth Sample via the HEW Youth Development Model's Community Program Impact Scales, Age and Sex.

ERIC Educational Resources Information Center

Truckenmiller, James L.

The former HEW National Strategy for Youth Development Model was a community-based planning and procedural tool designed to enhance positive youth development and prevent delinquency through a process of youth needs assessment, development of targeted programs, and program impact evaluation. A series of 12 Impact Scales most directly reflect the…

Biosignal-based relaxation evaluation of head-care robot.

PubMed

Ando, Takeshi; Takeda, Maki; Maruyama, Tomomi; Susuki, Yuto; Hirose, Toshinori; Fujioka, Soichiro; Mizuno, Osamu; Yamada, Kenji; Ohno, Yuko; Yukio, Honda

2013-01-01

Such popular head care procedures as shampooing and scalp massages provide physical and mental relaxation. However, they place a big burden such as chapped hands on beauticians and other practitioners. Based on our robot hand technology, we have been developing a head care robot. In this paper, we quantitatively evaluated its relaxation effect using the following biosignals: accelerated plethymography (SDNN, HF/TP, LF/HF), heart rate (HR), blood pressure, salivary amylase (sAA) and peripheral skin temperature (PST). We compared the relaxation of our developed head care robot with the head care provided by nurses. In our experimental result with 54 subjects, the activity of the autonomic nerve system changed before and after head care procedures performed by both a human nurse and our proposed robot. Especially, in the proposed robot, we confirmed significant differences with the procedure performed by our proposed head care robot in five indexes: HF/TP, LF/HF, HR, sAA, and PST. The activity of the sympathetic nerve system decreased, because the values of its indexes significantly decreased: LF/HF, HR, and sAA. On the other hand, the activity of the parasympathetic nerve system increased, because of the increase of its indexes value: HF/TP and PST. Our developed head care robot provided satisfactory relaxation in just five minutes of use.

Development and Pilot Testing of 24-Hour Multiple-Pass Recall to Assess Dietary Intake of Toddlers of Somali- and Iraqi-Born Mothers Living in Norway

PubMed Central

Grewal, Navnit Kaur; Mosdøl, Annhild; Aunan, Marte Bergsund; Monsen, Carina; Torheim, Liv Elin

2014-01-01

The aim of this study was to develop, test, and evaluate a 24-h recall procedure to assess the dietary intake of toddlers of Somali- and Iraqi-born mothers living in Norway. A protocol for a 24-h multiple-pass recall procedure, registration forms, and visual tools (a picture library for food identification and portion size estimation) was developed and tested in 12 mothers from Somalia and Iraq with children aged 10–21 months. Five female field workers were recruited and trained to conduct the interviews. Evaluation data for the 24-h recall procedure were collected from both the mothers and the field workers. Nutrient intake was calculated using a Norwegian dietary calculation system. Each child’s estimated energy intake was compared with its estimated energy requirement. Both the mothers and the field workers found the method feasible and the visual tools useful. The estimated energy intake corresponded well with the estimated energy requirement for most of the children (within mean ± 2 SD, except for three). The pilot study identified the need for additional foods in the picture library and some crucial aspects in training and supervising the field workers to reduce sources of error in the data collection. PMID:24949548

Application of multivariate techniques in the optimization of a procedure for the determination of bioavailable concentrations of Se and As in estuarine sediments by ICP OES using a concomitant metals analyzer as a hydride generator.

PubMed

Lopes, Watson da Luz; Santelli, Ricardo Erthal; Oliveira, Eliane Padua; de Carvalho, Maria de Fátima Batista; Bezerra, Marcos Almeida

2009-10-15

A procedure has been developed for the determination of bioavailable concentrations of selenium and arsenic in estuarine sediments employing inductively coupled plasma optical emission spectrometry (ICP OES) using a concomitant metals analyzer device to perform hydride generation. The optimization of hydride generation was done in two steps: using a two-level factorial design for preliminary evaluation of studied factors and a Doehlert design to assess the optimal experimental conditions for analysis. Interferences of transition metallic ions (Cd(2+), Co(2+), Cu(2+), Fe(3+) and Ni(2+)) to selenium and arsenic signals were minimized by using higher hydrochloric acid concentrations. In this way, the procedure allowed the determination of selenium and arsenic in sediments with a detection limit of 25 and 30 microg kg(-1), respectively, assuming a 50-fold sample dilution (0.5 g sample extraction to 25 mL sample final volume). The precision, expressed as a relative standard deviation (% RSD, n=10), was 0.2% for both selenium and arsenic in 200 microg L(-1) solutions, which corresponds to 10 microg g(-1) in sediment samples after acid extraction. Applying the proposed procedure, a linear range of 0.08-10 and 0.10-10 microg g(-1) was obtained for selenium and arsenic, respectively. The developed procedure was validated by the analysis of two certified reference materials: industrial sludge (NIST 2782) and river sediment (NIST 8704). The results were in agreement with the certified values. The developed procedure was applied to evaluate the bioavailability of both elements in four sediment certified reference materials, in which there are not certified values for bioavailable fractions, and also in estuarine sediment samples collected in several sites of Guanabara Bay, an impacted environment in Rio de Janeiro, Brazil.

Effectiveness of a five-step method for teaching clinical skills to students in a dental college in India.

PubMed

Virdi, Mandeep S; Sood, Meenakshi

2011-11-01

This study conducted at the PDM Dental College and Research Institute, Haryana, India, had the purpose of developing a teaching method based upon a five-step method for teaching clinical skills to students proposed by the American College of Surgeons. This five-step teaching method was used to place fissure sealants as an initial procedure by dental students in clinics. The sealant retention was used as an objective evaluation of the skill learnt by the students. The sealant retention was 92 percent at six- and twelve-month evaluations and 90 percent at the eighteen-month evaluation. These results indicate that simple methods can be devised for teaching clinical skills and achieve high success rates in clinical procedures requiring multiple steps.

Simplified procedures for correlation of experimentally measured and predicted thrust chamber performance

NASA Technical Reports Server (NTRS)

Powell, W. B.

1973-01-01

Thrust chamber performance is evaluated in terms of an analytical model incorporating all the loss processes that occur in a real rocket motor. The important loss processes in the real thrust chamber were identified, and a methodology and recommended procedure for predicting real thrust chamber vacuum specific impulse were developed. Simplified equations for the calculation of vacuum specific impulse are developed to relate the delivered performance (both vacuum specific impulse and characteristic velocity) to the ideal performance as degraded by the losses corresponding to a specified list of loss processes. These simplified equations enable the various performance loss components, and the corresponding efficiencies, to be quantified separately (except that interaction effects are arbitrarily assigned in the process). The loss and efficiency expressions presented can be used to evaluate experimentally measured thrust chamber performance, to direct development effort into the areas most likely to yield improvements in performance, and as a basis to predict performance of related thrust chamber configurations.

Automating lexical cross-mapping of ICNP to SNOMED CT.

PubMed

Kim, Tae Youn

2016-01-01

The purpose of this study was to examine the feasibility of automating lexical cross-mapping of a logic-based nursing terminology (ICNP) to SNOMED CT using the Unified Medical Language System (UMLS) maintained by the U.S. National Library of Medicine. A two-stage approach included patterns identification, and application and evaluation of an automated term matching procedure. The performance of the automated procedure was evaluated using a test set against a gold standard (i.e. concept equivalency table) created independently by terminology experts. There were lexical similarities between ICNP diagnostic concepts and SNOMED CT. The automated term matching procedure was reliable as presented in recall of 65%, precision of 79%, accuracy of 82%, F-measure of 0.71 and the area under the receiver operating characteristics (ROC) curve of 0.78 (95% CI 0.73-0.83). When the automated procedure was not able to retrieve lexically matched concepts, it was also unlikely for terminology experts to identify a matched SNOMED CT concept. Although further research is warranted to enhance the automated matching procedure, the combination of cross-maps from UMLS and the automated procedure is useful to generate candidate mappings and thus, assist ongoing maintenance of mappings which is a significant burden to terminology developers.

22 CFR 96.100 - Procedures for evaluating applicants for temporary accreditation.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) Procedures and Standards Relating to Temporary Accreditation § 96.100 Procedures for evaluating applicants... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Procedures for evaluating applicants for... entity must: (1) Review the agency's written application and supporting documentation; and (2) Verify the...

PCR detection of psychrophilic Clostridium spp. causing 'blown pack' spoilage of vacuum-packed chilled meats.

PubMed

Broda, D M; Boerema, J A; Bell, R G

2003-01-01

To develop a practical molecular procedure that directly, without isolation, and specifically detects the presence of clostridia which cause 'blown pack' spoilage of vacuum-packed meat. Primer sets and PCR amplification procedures were developed that detect the presence of 16S rDNA gene and/or 16S-23S rDNA internal transcribed spacer fragments of 'blown pack' causing clostridia in meat. The specificity of the developed procedures was evaluated with DNA obtained from close phylogenetic neighbours of 'blown pack' causing clostridia, food clostridia and common meat spoilage microorganisms. The sensitivity of detection was assessed in non-enriched and low-temperature-enriched beef mince inoculated with serially diluted pure cultures of Clostridium estertheticum DSMZ 8809T and Cl. gasigenes DB1AT. The efficacy of detection procedures was evaluated for naturally contaminated vacuum-packed meat samples. Three primer sets, 16SE, 16SDB and EISR, produced amplicons of the expected size with DNA templates from target clostridia, but failed to yield PCR products with DNAs from any other microorganisms tested. With 16SE and 16SDB primers, minimum levels of detection were 104 CFU g(-1) for non-enriched, and 102 CFU g(-1) for enriched meat samples. Based on the established specificity of these primers, as well as DNA sequencing of amplicons, Cl. gasigenes was confirmed as the causative agent of 'blown pack' spoilage in two packs, and Cl. estertheticum as the causative agent in the third. The developed method can be used for rapid detection of 'blown pack' causing clostridia in commercial blown packs, or following low temperature enrichment, for detection of these microorganisms in meat containing as few as 100 clostridial cells per gram. The paper reports practical procedures that can be used for rapid confirmation of the causative agents of clostridial 'blown pack' spoilage in commercial spoiled packs, or for detection of psychrophilic clostridia in epidemiological trace back of 'blown pack' spoilage incidents in meat processing plants.

Major System Source Evaluation and Selection Procedures.

DTIC Science & Technology

1987-04-02

A-RIBI I" MAJOR SYSTEM SOURCE EVALUATION AND SELECTION PROCEDURES / (U) BUSINESS MANAGEMENT RESEARCH ASSOCIATES INC ARLINGTON VA 02 APR 6? ORMC-5...BRMC-85-5142-1 0 I- MAJOR SYSTEM SOURCE EVALUATION AND SELECTION PROCEDURES o I Business Management Research Associates, Inc. 1911 Jefferson Davis...FORCE SOURCE EVALUATION AND SELECTI ON PROCEDURES Prepared by Business Management Research Associates, Inc., 1911 Jefferson Davis Highway, Arlington

Notes on testing equality and interval estimation in Poisson frequency data under a three-treatment three-period crossover trial.

PubMed

Lui, Kung-Jong; Chang, Kuang-Chao

2016-10-01

When the frequency of event occurrences follows a Poisson distribution, we develop procedures for testing equality of treatments and interval estimators for the ratio of mean frequencies between treatments under a three-treatment three-period crossover design. Using Monte Carlo simulations, we evaluate the performance of these test procedures and interval estimators in various situations. We note that all test procedures developed here can perform well with respect to Type I error even when the number of patients per group is moderate. We further note that the two weighted-least-squares (WLS) test procedures derived here are generally preferable to the other two commonly used test procedures in the contingency table analysis. We also demonstrate that both interval estimators based on the WLS method and interval estimators based on Mantel-Haenszel (MH) approach can perform well, and are essentially of equal precision with respect to the average length. We use a double-blind randomized three-treatment three-period crossover trial comparing salbutamol and salmeterol with a placebo with respect to the number of exacerbations of asthma to illustrate the use of these test procedures and estimators. © The Author(s) 2014.

High voltage power transistor development

NASA Technical Reports Server (NTRS)

Hower, P. L.

1981-01-01

Design considerations, fabrication procedures, and methods of evaluation for high-voltage power-transistor development are discussed. Technique improvements such as controlling the electric field at the surface and perserving lifetimes in the collector region which have advanced the state of the art in high-voltage transistors are discussed. These improvements can be applied directly to the development of 1200 volt, 200 ampere transistors.

Design of a Personnel and Training Information System for Educational R&D Personnel: Recommended Books and Monographs.

ERIC Educational Resources Information Center

Hood, Paul D.

This list of recommended books and monographs was compiled by the Far West Laboratory for Educational Research and Development during a project designed to develop and test procedures to evaluate and disseminate information on training of education research and development (R&D) personnel. The purpose of the bibliography is to provide guidance for…

Risk Predictors for Postcontrast Acute Kidney Injury.

PubMed

Krause, Trudy Millard; Ukhanova, Maria; Lee Revere, Frances; Finkel, Kevin W

2018-05-22

To evaluate risk predictors of acute kidney injury (AKI) after contrast-media procedures in a broader cohort of patients than previously reported. Comprehensive medical and pharmacy commercial claims data from 2012 to 2014. Claims associated with contrast-media procedures for 2,737,020 persons between January 1, 2012 and November 30, 2014, were reviewed. The overall incidence of AKI after a contrast-media procedure was 0.85%. AKI occurred in 26% of cases that had two or more contrast procedures within 30 days, compared with 9% of non-AKI cases. Although the incidence of postcontrast AKI was low, 10% of patients who developed AKI had a recent previous episode of AKI. In cases when AKI had occurred within 180 days of contrast administration, the odds of subsequent kidney injury was 9.39. Overall, there is a low risk (0.85%) of developing an AKI after a procedure with contrast-media consistent with several recent studies. However, in adults with a recent history of AKI, physicians must consider this history as a risk factor for subsequent AKI. Copyright © 2018 American College of Radiology. Published by Elsevier Inc. All rights reserved.

The development of a purification procedure for saxitoxin-induced protein.

PubMed

Smith, D S; Kitts, D D; Fenske, B; Owen, T G; Shyng, S

1995-02-01

A simple economical procedure for purifying saxitoxin-induced protein (SIP) from crude extracts of the small shore crab, Hemigrapsus oregenesis, was developed. (NH4)2SO4 precipitation, chymotrypsin digestion, heat treatment, gel filtration and ion-exchange-chromatography procedures were evaluated in purifying SIP. An enzyme immunoassay was used to determine the SIP yield and relative purity at each step of three procedures, thus permitting an assessment of the conditions required for maximum recovery. Response surface analysis was used in an attempt to determine the optimum temperature and exposure time for the heat treatment. A 20 min incubation at 65 degrees C was confirmed by electrophoretic analysis to be the best combination of time and temperature for achieving both an acceptable yield and purity of SIP. SIP in desalted concentrate was shown to be resistant to chymotrypsin proteolysis; however, this enzyme had deleterious effects on SIP purification at later stages of the procedure. The omission of the chymotrypsin digestion, and the inclusion of gel-filtration chromatography in the final clean-up step, resulted in the purification of SIP comparable with that achieved with affinity chromatography.

Modelling of wildlife migrations and its economic impacts

NASA Astrophysics Data System (ADS)

Myšková, Kateřina; Žák, Jaroslav

2013-10-01

Natural wildlife migrations are often disrupted by the construction of line structures, especially freeways. Various overpasses and underpasses (migration objects) are being designed to enable species to pass through line structures. The newly developed original procedure for the quantification of the utility of migration objects (migration potentials) and sections of line structures retrieves the deficiencies of the previous ones. The procedure has been developed under bulk information obtained by monitoring migrations using camera system and spy games. The log-normal distribution functions are used. The procedure for the evaluation of the probability of the permeability of the line structures sectors is also presented. The above mentioned procedures and algorithms can be used while planning, preparing, constructing or verifying the measures to assure the permeability of line structures for selected feral species. Using the procedures can significantly reduce financial costs and improve the permeability. When the migration potentials are correctly determined and the whole sector is taken into account for the migrations, some originally designed objects may be found to be redundant and not building them will bring financial savings.

Volatilization of organic compounds from streams

USGS Publications Warehouse

Rathburn, R.E.; Tai, D.Y.

1982-01-01

Mass-transfer coefficients for the volatilization of ethylene and propane were correlated with the hydraulic and geometric properties of seven streams, and predictive equations were developed. The equations were evaluated using a normalized root-mean-square error as the criterion of comparison. The two best equations were a two-variable equation containing the energy dissipated per unit mass per unit time and the average depth of flow and a three-variable equation containing the average velocity, the average depth of flow, and the slope of the stream. Procedures for adjusting the ethylene and propane coefficients for other organic compounds were evaluated. These procedures are based on molecular diffusivity, molecular diameter, or molecular weight. Because of limited data, none of these procedures have been extensively verified. Therefore, until additional data become available, it is suggested that the mass-transfer coefficient be assumed to be inversely proportional to the square root of the molecular weight.

The development and evaluation of a nursing information system for caring clinical in-patient.

PubMed

Fang, Yu-Wen; Li, Chih-Ping; Wang, Mei-Hua

2015-01-01

The research aimed to develop a nursing information system in order to simplify the admission procedure for caring clinical in-patient, enhance the efficiency of medical information documentation. Therefore, by correctly delivering patients’ health records, and providing continues care, patient safety and care quality would be effectively improved. The study method was to apply Spiral Model development system to compose a nursing information team. By using strategies of data collection, working environment observation, applying use-case modeling, and conferences of Joint Application Design (JAD) to complete the system requirement analysis and design. The Admission Care Management Information System (ACMIS) mainly included: (1) Admission nursing management information system. (2) Inter-shift meeting information management system. (3) The linkage of drug management system and physical examination record system. The framework contained qualitative and quantitative components that provided both formative and summative elements of the evaluation. System evaluation was to apply information success model, and developed questionnaire of consisting nurses’ acceptance and satisfaction. The results of questionnaires were users’ satisfaction, the perceived self-involvement, age and information quality were positively to personal and organizational effectiveness. According to the results of this study, the Admission Care Management Information System was practical to simplifying clinic working procedure and effective in communicating and documenting admission medical information.

Development of the L-1011 four-dimensional flight management system

NASA Technical Reports Server (NTRS)

Lee, H. P.; Leffler, M. F.

1984-01-01

The development of 4-D guidance and control algorithms for the L-1011 Flight Management System is described. Four-D Flight Management is a concept by which an aircraft's flight is optimized along the 3-D path within the constraints of today's ATC environment, while its arrival time is controlled to fit into the air traffic flow without incurring or causing delays. The methods developed herein were designed to be compatible with the time-based en route metering techniques that were recently developed by the Dallas/Fort Worth and Denver Air Route Traffic Control Centers. The ensuing development of the 4-D guidance algorithms, the necessary control laws and the operational procedures are discussed. Results of computer simulation evaluation of the guidance algorithms and control laws are presented, along with a description of the software development procedures utilized.

Expanding the boundaries of evaluative learning research: How intersecting regularities shape our likes and dislikes.

PubMed

Hughes, Sean; De Houwer, Jan; Perugini, Marco

2016-06-01

Over the last 30 years, researchers have identified several types of procedures through which novel preferences may be formed and existing ones altered. For instance, regularities in the presence of a single stimulus (as in the case of mere exposure) or 2 or more stimuli (as in the case of evaluative conditioning) have been shown to influence liking. We propose that intersections between regularities represent a previously unrecognized class of procedures for changing liking. Across 4 related studies, we found strong support for the hypothesis that when environmental regularities intersect with one another (i.e., share elements or have elements that share relations with other elements), the evaluative properties of the elements of those regularities can change. These changes in liking were observed across a range of stimuli and procedures and were evident when self-report measures, implicit measures, and behavioral choice measures of liking were employed. Functional and mental explanations of this phenomenon are offered followed by a discussion of how this new type of evaluative learning effect can accelerate theoretical, methodological, and empirical development in attitude research. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Integrated flexible handheld probe for imaging and evaluation of iridocorneal angle

NASA Astrophysics Data System (ADS)

Shinoj, Vengalathunadakal K.; Murukeshan, Vadakke Matham; Baskaran, Mani; Aung, Tin

2015-01-01

An imaging probe is designed and developed by integrating a miniaturized charge-coupled diode camera and light-emitting diode light source, which enables evaluation of the iridocorneal region inside the eye. The efficiency of the prototype probe instrument is illustrated initially by using not only eye models, but also samples such as pig eye. The proposed methodology and developed scheme are expected to find potential application in iridocorneal angle documentation, glaucoma diagnosis, and follow-up management procedures.

Vocational Agriculture/Agribusiness. Wisconsin Association of Vocational Agriculture Instructors Curriculum Guide for Wisconsin High Schools. Revised.

ERIC Educational Resources Information Center

Wisconsin Association of Vocational Agriculture Instructors, Madison.

This guide is designed to aid the development of vocational education programs in agriculture in local school districts. Major program objectives, conditions conducive to learning, program evaluation, suggestions for using the guide, curriculum models, and Wisconsin's philosophy and procedures in developing occupational experience programs in…

The Potential of Environmental Sensors for Improving the Mobility Performance of Mainstream Blind Students. Final Report.

ERIC Educational Resources Information Center

Weisgerber, Robert A.; deHaas, Carla

The report describes an effort to develop and test instructional materials, techniques and procedures - ESSETS (environmental sensing, selection, evaluation and training system) - for teaching functionally blind young adults to use electronic travel aids (ETAs). Considered are development of training guidelines, field site selection and instructor…

Development of Techniques and Data for Evaluating Ride Quality, Volume III : Guidelines for Development of Ride-Quality Models and Their Applications

DOT National Transportation Integrated Search

1978-02-01

Ride-quality models for city buses and intercity trains are presented and discussed in terms of their ability to predict passenger comfort and ride acceptability. The report, the last of three volumes, contains procedural guidelines to be employed by...

An investigation of the compressive strength of PRD-49-3/Epoxy composites

NASA Technical Reports Server (NTRS)

Kulkarni, S. V.; Rice, J. S.; Rosen, B. W.

1973-01-01

The development of unidirectional fiber composite materials is discussed. The mechanical and physical properties of the materials are described. Emphasis is placed in analyzing the compressive behavior of composite materials and developing methods for increasing compressive strength. The test program for evaluating the various procedures for improving compressive strength are reported.

Integrating Standard Operating Procedures and Industry Notebook Standards to Evaluate Students in Laboratory Courses

ERIC Educational Resources Information Center

Wallert, Mark A.; Provost, Joseph J.

2014-01-01

To enhance the preparedness of graduates from the Biochemistry and Biotechnology (BCBT) Major at Minnesota State University Moorhead for employment in the bioscience industry we have developed a new Industry certificate program. The BCBT Industry Certificate was developed to address specific skill sets that local, regional, and national industry…

Wildfire risk and hazard: procedures for the first approximation

Treesearch

David E. Calkin; Alan A. Ager; Julie Gilbertson-Day

2010-01-01

This report was designed to meet three broad goals: (1) evaluate wildfire hazard on Federal lands; (2) develop information useful in prioritizing where fuels treatments and mitigation measures might be proposed to address significant fire hazard and risk; and (3) develop risk-based performance measures to document the effectiveness of fire management programs. The...

The Development of the New York State Bank of Reading Objectives.

ERIC Educational Resources Information Center

O'Reilly, Robert P.

This report presents the rationale, structure, content and procedures for the computerized bank of reading objectives being developed for New York State schools. The project was initiated to provide a technical resource which would contribute to planning, design, and evaluation of reading programs. The report defines the organizing concepts for…

Evaluating imputation and modeling in the North Central region

Treesearch

Ronald E. McRoberts

2000-01-01

The objectives of the North Central Research Station, USDA Forest Service, in developing procedures for annual forest inventories include establishing the capability of producing annual estimates of timber volume and related variables. The inventory system developed to accomplish these objectives features an annual sample of measured field plots and techniques for...

EXTENSION IN RURAL COMMUNITIES, A MANUAL FOR AGRICULTURAL AND HOME EXTENSION WORKERS.

ERIC Educational Resources Information Center

SAVILE, A.H.

A PRACTICAL GUIDE IS PROVIDED FOR TRAINERS OF ADVISORY AND EXTENSION WORKERS AND LOCAL LEADERS IN AGRICULTURE AND COMMUNITY DEVELOPMENT IN DEVELOPING NATIONS. BASIC PRINCIPLES OF AGRICULTURAL EXTENSION, COMMUNITY SURVEY PROCEDURES, ELEMENTS OF PROGRAM PLANNING, AND PURPOSES AND METHODS OF PROGRAM EVALUATION ARE DESCRIBED. THEN FOLLOW TWO CHAPTERS…

Evaluating EPA’s AP-42 development methodology using a cotton gin total PM dataset

USDA-ARS?s Scientific Manuscript database

In August 2013, the U.S. Environmental Protection Agency’s (EPA) published their new methodology for updating the Compilation of Air Pollution Emission Factors (AP-42). The “Recommended Procedures for Development of Emissions Factors and Use of the WebFIRE Database” has yet to be widely used. These ...

Development and Evaluation of an Interactive Computer-Assisted Learning Program--A Novel Approach to Teaching Gynaecological Surgery.

ERIC Educational Resources Information Center

Jha, Vikram; Widdowson, Shelley; Duffy, Sean

2002-01-01

Discusses computer-assisted learning (CAL) in medical education and describes the development of an interactive CAL program on CD-ROM, combining video, illustrations, and three-dimensional images, to enhance understanding of vaginal hysterectomy in terms of the anatomy and steps of the surgical procedure. (Author/LRW)

Facial palsy after dental procedures - Is viral reactivation responsible?

PubMed

Gaudin, Robert A; Remenschneider, Aaron K; Phillips, Katie; Knipfer, Christian; Smeets, Ralf; Heiland, Max; Hadlock, Tessa A

2017-01-01

Herpes labialis viral reactivation has been reported following dental procedures, but the incidence, characteristics and outcomes of delayed peripheral facial nerve palsy following dental work is poorly understood. Herein we describe the unique features of delayed facial paresis following dental procedures. An institutional retrospective review was performed to identify patients diagnosed with delayed facial nerve palsy within 30 days of dental manipulation. Demographics, prodromal signs and symptoms, initial medical treatment and outcomes were assessed. Of 2471 patients with facial palsy, 16 (0.7%) had delayed facial paresis following ipsilateral dental procedures. Average age at presentation was 44 yrs and 56% (9/16) were female. Clinical evaluation was consistent with Bell's palsy in 14 (88%) and Ramsay-Hunt syndrome in 2 patients (12%). Patients developed facial paresis an average of 3.9 days after the dental procedure, with all individuals developing a flaccid paralysis (House Brackmann (HB) grade VI) during the acute stage. 50% of patients developed persistent facial palsy in the form of non-flaccid facial paralysis (HBIII-IV). Facial palsy, like herpes labialis, can occur in the days following dental procedures and may also be related to viral reactivation. In this small cohort, long-term facial outcomes appear worse than for spontaneous Bell's palsy. Copyright © 2016 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Predictive Factors of Atelectasis Following Endoscopic Resection.

PubMed

Choe, Jung Wan; Jung, Sung Woo; Song, Jong Kyu; Shim, Euddeum; Choo, Ji Yung; Kim, Seung Young; Hyun, Jong Jin; Koo, Ja Seol; Yim, Hyung Joon; Lee, Sang Woo

2016-01-01

Atelectasis is one of the pulmonary complications associated with anesthesia. Little is known about atelectasis following endoscopic procedures under deep sedation. This study evaluated the frequency, risk factors, and clinical course of atelectasis after endoscopic resection. A total of 349 patients who underwent endoscopic resection of the upper gastrointestinal tract at a single academic tertiary referral center from March 2010 to October 2013 were enrolled. Baseline characteristics and clinical data were retrospectively reviewed from medical records. To identify atelectasis, we compared the chest radiography taken before and after the endoscopic procedure. Among the 349 patients, 68 (19.5 %) had newly developed atelectasis following endoscopic resection. In univariate logistic regression analysis, atelectasis correlated significantly with high body mass index, smoking, diabetes mellitus, procedure duration, size of lesion, and total amount of propofol. In multiple logistic regression analysis, body mass index, procedure duration, and total propofol amount were risk factors for atelectasis following endoscopic procedures. Of the 68 patients with atelectasis, nine patients developed fever, and six patients displayed pneumonic infiltration. The others had no symptoms related to atelectasis. The incidence of radiographic atelectasis following endoscopic resection was nearly 20 %. Obesity, procedural time, and amount of propofol were the significant risk factors for atelectasis following endoscopic procedure. Most cases of the atelectasis resolved spontaneously with no sequelae.

Setting priorities for space research: An experiment in methodology

NASA Technical Reports Server (NTRS)

1995-01-01

In 1989, the Space Studies Board created the Task Group on Priorities in Space Research to determine whether scientists should take a role in recommending priorities for long-term space research initiatives and, if so, to analyze the priority-setting problem in this context and develop a method by which such priorities could be established. After answering the first question in the affirmative in a previous report, the task group set out to accomplish the second task. The basic assumption in developing a priority-setting process is that a reasoned and structured approach for ordering competing initiatives will yield better results than other ways of proceeding. The task group proceeded from the principle that the central criterion for evaluating a research initiative must be its scientific merit -- the value of the initiative to the proposing discipline and to science generally. The group developed a two-stage methodology for priority setting and constructed a procedure and format to support the methodology. The first of two instruments developed was a standard format for structuring proposals for space research initiatives. The second instrument was a formal, semiquantitative appraisal procedure for evaluating competing proposals. This report makes available complete templates for the methodology, including the advocacy statement and evaluation forms, as well as an 11-step schema for a priority-setting process. From the beginning of its work, the task group was mindful that the issue of priority setting increasingly pervades all of federally supported science and that its work would have implications extending beyond space research. Thus, although the present report makes no recommendations for action by NASA or other government agencies, it provides the results of the task group's work for the use of others who may study priority-setting procedures or take up the challenge of implementing them in the future.

Psychophysical tests for DWI arrest

DOT National Transportation Integrated Search

1977-06-01

As part of DWI arrest procedures, tests of alcohol impairment may be used by police officers, either at roadside or in the station. Objectives of this study included evaluation of currently-used tests, development of more sensitive and reliable measu...

5 CFR 1330.402 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Definitions. In this subpart— Appraisal system means the policies, practices, and procedures an agency... authority, for planning, monitoring, developing, evaluating, and rewarding employee performance. This includes appraisal systems and appraisal programs as defined at § 430.203 and performance management...

An efficient early phase 2 procedure to screen medications for efficacy in smoking cessation.

PubMed

Perkins, Kenneth A; Lerman, Caryn

2014-01-01

Initial screening of new medications for potential efficacy (i.e., Food and Drug Administration (FDA) early phase 2), such as in aiding smoking cessation, should be efficient in identifying which drugs do, or do not, warrant more extensive (and expensive) clinical testing. This focused review outlines our research on development, evaluation, and validation of an efficient crossover procedure for sensitivity in detecting medication efficacy for smoking cessation. First-line FDA-approved medications of nicotine patch, varenicline, and bupropion were tested as model drugs, in three separate placebo-controlled studies. We also tested specificity of our procedure in identifying a drug that lacks efficacy, using modafinil. This crossover procedure showed sensitivity (increased days of abstinence) during week-long "practice" quit attempts with each of the active cessation medications (positive controls) versus placebo, but not with modafinil (negative control) versus placebo, as hypothesized. Sensitivity to medication efficacy signal was observed only in smokers high in intrinsic quit motivation (i.e., already preparing to quit soon) and not smokers low in intrinsic quit motivation, even if monetarily reinforced for abstinence (i.e., given extrinsic motivation). A crossover procedure requiring less time and fewer subjects than formal trials may provide an efficient strategy for a go/no-go decision whether to advance to subsequent phase 2 randomized clinical trials with a novel drug. Future research is needed to replicate our results and evaluate this procedure with novel compounds, identify factors that may limit its utility, and evaluate its applicability to testing efficacy of compounds for treating other forms of addiction.

Hybrid energy storage test procedures and high power battery project FY-1995 interim report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, G.L.

1995-12-01

Near the end of FY 1994, DOE provided funding and guidance to INEL for two separate but closely related tasks involving high power energy storage technology. One task was intended to develop and refine application-specific test procedures appropriate to high power energy storage devices for potential use in hybrid vehicles, including batteries, ultracapacitors, flywheels, and similar devices. The second task was intended to characterize the high power capabilities of presently available battery technologies, as well as eventually to evaluate the potential high power capabilities of advanced battery technologies such as those being developed by the USABC. Since the evaluation ofmore » such technologies is necessarily dependent to some extent on the availability of appropriate test methods, these two tasks have been closely coordinated. This report is intended to summarize the activities and results for both tasks accomplished during FY-1995.« less

Implanting intra-abdominal radiotransmitters with external whip antennas in ducks

USGS Publications Warehouse

Korschgen, C.E.; Kenow, K.P.; Gendron-Fitzpatrick, A.; Green, W.L.; Dein, F.J.

1996-01-01

We developed and evaluated a surgical procedure for implanting intra-abdominal radiotransmitters with external whip antennas in captive mallards (Anas platyrhynchos). Transmitters were implanted in the abdominal cavity and the antennas exited through the caudal abdominal wall and skin. Birds with implanted transmitters developed mild to moderate localized air sac reactions. These reactions involved adhesions of the right anterior abdominal air sac to the liver with contractions around the transmitters and antenna catheters. The adhesions were reinforced by a proliferation of connective tissue and lined by multinucleated giant cells (foreign body reaction). Casual observation indicated that neither behavior nor activity of the birds was altered by the histological reaction to the transmitter implant. No increase in systemic lesions (particularly liver or kidney) could be correlated with the histological reactions. Our evaluations indicate that the procedure is a reliable method for radiomarking ducks and the technique has been successfully used in 2 field studies.

Anxiety and Threat-Related Attention: Cognitive-Motivational Framework and Treatment.

PubMed

Mogg, Karin; Bradley, Brendan P

2018-03-01

Research in experimental psychopathology and cognitive theories of anxiety highlight threat-related attention biases (ABs) and underpin the development of a computer-delivered treatment for anxiety disorders: attention-bias modification (ABM) training. Variable effects of ABM training on anxiety and ABs generate conflicting research recommendations, novel ABM training procedures, and theoretical controversy. This article summarises an updated cognitive-motivational framework, integrating proposals from cognitive models of anxiety and attention, as well as evidence of ABs. Interactions between motivational salience-driven and goal-directed influences on multiple cognitive processes (e.g., stimulus evaluation, inhibition, switching, orienting) underlie anxiety and the variable manifestations of ABs (orienting towards and away from threat; threat-distractor interference). This theoretical analysis also considers ABM training as cognitive skill training, describes a conceptual framework for evaluating/developing novel ABM training procedures, and complements network-based research on reciprocal anxiety-cognition relationships. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Feature Screening in Ultrahigh Dimensional Cox's Model.

PubMed

Yang, Guangren; Yu, Ye; Li, Runze; Buu, Anne

Survival data with ultrahigh dimensional covariates such as genetic markers have been collected in medical studies and other fields. In this work, we propose a feature screening procedure for the Cox model with ultrahigh dimensional covariates. The proposed procedure is distinguished from the existing sure independence screening (SIS) procedures (Fan, Feng and Wu, 2010, Zhao and Li, 2012) in that the proposed procedure is based on joint likelihood of potential active predictors, and therefore is not a marginal screening procedure. The proposed procedure can effectively identify active predictors that are jointly dependent but marginally independent of the response without performing an iterative procedure. We develop a computationally effective algorithm to carry out the proposed procedure and establish the ascent property of the proposed algorithm. We further prove that the proposed procedure possesses the sure screening property. That is, with the probability tending to one, the selected variable set includes the actual active predictors. We conduct Monte Carlo simulation to evaluate the finite sample performance of the proposed procedure and further compare the proposed procedure and existing SIS procedures. The proposed methodology is also demonstrated through an empirical analysis of a real data example.

Sizing Single Cantilever Beam Specimens for Characterizing Facesheet/Core Peel Debonding in Sandwich Structure

NASA Technical Reports Server (NTRS)

Ratcliffe, James G.

2010-01-01

This technical publication details part of an effort focused on the development of a standardized facesheet/core peel debonding test procedure. The purpose of the test is to characterize facesheet/core peel in sandwich structure, accomplished through the measurement of the critical strain energy release rate associated with the debonding process. Following an examination of previously developed tests and a recent evaluation of a selection of these methods, a single cantilever beam (SCB) specimen was identified as being a promising candidate for establishing such a standardized test procedure. The objective of the work described here was to begin development of a protocol for conducting a SCB test that will render the procedure suitable for standardization. To this end, a sizing methodology was developed to ensure appropriate SCB specimen dimensions are selected for a given sandwich system. Application of this method to actual sandwich systems yielded SCB specimen dimensions that would be practical for use. This study resulted in the development of a practical SCB specimen sizing method, which should be well-suited for incorporation into a standardized testing protocol.

Development of probabilistic multimedia multipathway computer codes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, C.; LePoire, D.; Gnanapragasam, E.

2002-01-01

The deterministic multimedia dose/risk assessment codes RESRAD and RESRAD-BUILD have been widely used for many years for evaluation of sites contaminated with residual radioactive materials. The RESRAD code applies to the cleanup of sites (soils) and the RESRAD-BUILD code applies to the cleanup of buildings and structures. This work describes the procedure used to enhance the deterministic RESRAD and RESRAD-BUILD codes for probabilistic dose analysis. A six-step procedure was used in developing default parameter distributions and the probabilistic analysis modules. These six steps include (1) listing and categorizing parameters; (2) ranking parameters; (3) developing parameter distributions; (4) testing parameter distributionsmore » for probabilistic analysis; (5) developing probabilistic software modules; and (6) testing probabilistic modules and integrated codes. The procedures used can be applied to the development of other multimedia probabilistic codes. The probabilistic versions of RESRAD and RESRAD-BUILD codes provide tools for studying the uncertainty in dose assessment caused by uncertain input parameters. The parameter distribution data collected in this work can also be applied to other multimedia assessment tasks and multimedia computer codes.« less

Creating a Culture of Safety Around Bar-Code Medication Administration: An Evidence-Based Evaluation Framework.

PubMed

Kelly, Kandace; Harrington, Linda; Matos, Pat; Turner, Barbara; Johnson, Constance

2016-01-01

Bar-code medication administration (BCMA) effectiveness is contingent upon compliance with best-practice protocols. We developed a 4-phased BCMA evaluation program to evaluate the degree of integration of current evidence into BCMA policies, procedures, and practices; identify barriers to best-practice BCMA use; and modify BCMA practice in concert with changes to the practice environment. This program provides an infrastructure for frontline nurses to partner with hospital leaders to continually evaluate and improve BCMA using a systematic process.

NASA Task Load Index (TLX). Volume 1.0; Computerized Version

NASA Technical Reports Server (NTRS)

Hart, Sandra G.

1986-01-01

This booklet and the accompanying diskette contain the materials necessary to collect subjective workload assessments with the NASA Task Load Index on IBM PC compatible microcomputers. This procedure for collecting workload ratings was developed by the Human Performance Group at NASA Ames Research Center during a three year research effort that involved more than 40 laboratory, simulation, and inflight experiments Although the technique is still undergoing evaluation, this package is being distributed to allow other researchers to use it in their own experiments Comments or suggestions about the procedure would be greatly appreciated This package is intended to fill a "nuts and bolts" function of describing the procedure. A bibliography provides background information about previous empirical findings and the logic that supports the procedure.

Prevention of the Posttraumatic Fibrotic Response in Joints

DTIC Science & Technology

2015-10-01

surgical procedures and subsequent collection of tissues have been developed and are currently used on a regular basis. Major Task 4: Evaluating the...needed to evaluate the utility of the inhibitory antibody to reduce the flexion contracture of injured knee joints. The employed techniques include...second surgery to remove a pin, and it did not change by the end of the 32nd week 1. Major Task 5: Task 4. Data analysis and statistical evaluation

Standardization of skin cleansing in vivo: part I. Development of an Automated Cleansing Device (ACiD).

PubMed

Sonsmann, F K; Strunk, M; Gediga, K; John, C; Schliemann, S; Seyfarth, F; Elsner, P; Diepgen, T L; Kutz, G; John, S M

2014-05-01

To date, there are no legally binding requirements concerning product testing in cosmetics. This leads to various manufacturer-specific test methods and absent transparent information on skin cleansing products. A standardized in vivo test procedure for assessment of cleansing efficacy and corresponding barrier impairment by the cleaning process is needed, especially in the occupational context where repeated hand washing procedures may be performed at short intervals. For the standardization of the cleansing procedure, an Automated Cleansing Device (ACiD) was designed and evaluated. Different smooth washing surfaces of the equipment for ACiD (incl. goat hair, felt, felt covered with nitrile caps) were evaluated regarding their skin compatibility. ACiD allows an automated, fully standardized skin washing procedure. Felt covered with nitrile as washing surface of the rotating washing units leads to a homogenous cleansing result and does not cause detectable skin irritation, neither clinically nor as assessed by skin bioengineering methods (transepidermal water loss, chromametry). Automated Cleansing Device may be useful for standardized evaluation of the cleansing effectiveness and parallel assessment of the corresponding irritancy potential of industrial skin cleansers. This will allow objectifying efficacy and safety of industrial skin cleansers, thus enabling market transparency and facilitating rational choice of products. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Optimal Roux-en-Y reconstruction after distal gastrectomy for early gastric cancer as assessed using the newly developed PGSAS-45 scale.

PubMed

Kawahira, Hiroshi; Kodera, Yasuhiro; Hiki, Naoki; Takahashi, Masazumi; Itoh, Seiji; Mitsumori, Norio; Kawashima, Yoshiyuki; Namikawa, Tsutomu; Inada, Takao; Nakada, Koji

2015-10-01

The optimal surgical procedure for distal gastrectomy with Roux-en-Y reconstruction (DGRY) remains to be determined. Recently, a self-report assessment instrument, the Postgastrectomy Syndrome Assessment Scale-45 (PGSAS-45), was compiled to evaluate symptoms, the living status and the quality of life of patients who have undergone gastrectomy. We used this scale to evaluate procedures used for DGRY. The subjects included 475 patients who underwent DGRY for stage IA/IB gastric cancer. We evaluated whether the size of the remnant stomach, length of the Roux limb, reconstruction route and anastomotic procedure affected the patients' symptoms, living status and quality of life assessed using the PGSAS-45. Patients with a residual stomach of more than half had significantly worse esophageal reflux scores than the patients with a smaller residual stomach (P = 0.0462); a residual stomach of one-third or one-fourth was favorable. A shorter length of the Roux limb was shown to be preferable to a longer Roux limb based on the results of the PGSAS-45. In addition, antecolic reconstruction and the anastomotic procedure using a linear stapler were found to be more favorable. The size of the remnant stomach and the length and route of the Roux limb significantly influence the patient-reported DGRY outcomes.

29 CFR 1956.22 - Procedures for evaluation and monitoring.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., Change, Evaluation and Withdrawal of Approval Procedures § 1956.22 Procedures for evaluation and... enforcement authority under section 18(e) of the Act is not relevant to Phase II and III monitoring under...

Simulation of time-control procedures for terminal area flow management

NASA Technical Reports Server (NTRS)

Alcabin, M.; Erzberger, H.; Tobias, L.; Obrien, P. J.

1985-01-01

Simulations of a terminal area traffic-management system incorporating automated scheduling and time-control (four-dimensional) techniques conducted at NASA Ames Research Center jointly with the Federal Aviation Administration, have shown that efficient procedures can be developed for handling a mix of 4D-equipped and conventionally equipped aircraft. A crucial role in this system is played by an ATC host computer algorithm, referred to as a speed advisory, that allows controllers to maintain accurate time schedules of the conventionally equipped aircraft in the traffic mix. Results are of the most recent simulations in which two important special cases were investigated. First, the effects of a speed advisory on touchdown time scheduling are examined, when unequipped aircraft are constrained to follow fuel-optimized profiles in the near-terminal area, and rescheduling procedures are developed to handle missed approaches of 4D-equipped aircraft. Various performance measures, including controller opinion, are used to evaluate the effectiveness of the procedures.

Enhanced Multiobjective Optimization Technique for Comprehensive Aerospace Design. Part A

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi; Rajadas, John N.

1997-01-01

A multidisciplinary design optimization procedure which couples formal multiobjectives based techniques and complex analysis procedures (such as computational fluid dynamics (CFD) codes) developed. The procedure has been demonstrated on a specific high speed flow application involving aerodynamics and acoustics (sonic boom minimization). In order to account for multiple design objectives arising from complex performance requirements, multiobjective formulation techniques are used to formulate the optimization problem. Techniques to enhance the existing Kreisselmeier-Steinhauser (K-S) function multiobjective formulation approach have been developed. The K-S function procedure used in the proposed work transforms a constrained multiple objective functions problem into an unconstrained problem which then is solved using the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm. Weight factors are introduced during the transformation process to each objective function. This enhanced procedure will provide the designer the capability to emphasize specific design objectives during the optimization process. The demonstration of the procedure utilizes a computational Fluid dynamics (CFD) code which solves the three-dimensional parabolized Navier-Stokes (PNS) equations for the flow field along with an appropriate sonic boom evaluation procedure thus introducing both aerodynamic performance as well as sonic boom as the design objectives to be optimized simultaneously. Sensitivity analysis is performed using a discrete differentiation approach. An approximation technique has been used within the optimizer to improve the overall computational efficiency of the procedure in order to make it suitable for design applications in an industrial setting.

Students' views on the block evaluation process: A descriptive analysis.

PubMed

Pakkies, Ntefeleng E; Mtshali, Ntombifikile G

2016-03-30

Higher education institutions have executed policies and practices intended to determine and promote good teaching. Students' evaluation of the teaching and learning process is seen as one measure of evaluating quality and effectiveness of instruction and courses. Policies and procedures guiding this process are discernible in universities, but it isoften not the case for nursing colleges. To analyse and describe the views of nursing students on block evaluation, and how feedback obtained from this process was managed. A quantitative descriptive study was conducted amongst nursing students (n = 177) in their second to fourth year of training from one nursing college in KwaZulu-Natal. A questionnaire was administered by the researcher and data were analysed using the Statistical Package of Social Sciences Version 19.0. The response rate was 145 (81.9%). The participants perceived the aim of block evaluation as improving the quality of teaching and enhancing their experiences as students.They questioned the significance of their input as stakeholders given that they had never been consulted about the development or review of the evaluation tool, or the administration process; and they often did not receive feedback from the evaluation they participated in. The college management should develop a clear organisational structure with supporting policies and operational guidelines for administering the evaluation process. The administration, implementation procedures, reporting of results and follow-up mechanisms should be made transparent and communicated to all concerned. Reports and actions related to these evaluations should provide feedback into relevant courses or programmes.

Helicopter Flight Procedures for Community Noise Reduction

NASA Technical Reports Server (NTRS)

Greenwood, Eric

2017-01-01

A computationally efficient, semiempirical noise model suitable for maneuvering flight noise prediction is used to evaluate the community noise impact of practical variations on several helicopter flight procedures typical of normal operations. Turns, "quick-stops," approaches, climbs, and combinations of these maneuvers are assessed. Relatively small variations in flight procedures are shown to cause significant changes to Sound Exposure Levels over a wide area. Guidelines are developed for helicopter pilots intended to provide effective strategies for reducing the negative effects of helicopter noise on the community. Finally, direct optimization of flight trajectories is conducted to identify low noise optimal flight procedures and quantify the magnitude of community noise reductions that can be obtained through tailored helicopter flight procedures. Physically realizable optimal turns and approaches are identified that achieve global noise reductions of as much as 10 dBA Sound Exposure Level.

Evaluation of the ROSA™ Spine robot for minimally invasive surgical procedures.

PubMed

Lefranc, M; Peltier, J

2016-10-01

The ROSA® robot (Medtech, Montpellier, France) is a new medical device designed to assist the surgeon during minimally invasive spine procedures. The device comprises a patient-side cart (bearing the robotic arm and a workstation) and an optical navigation camera. The ROSA® Spine robot enables accurate pedicle screw placement. Thanks to its robotic arm and navigation abilities, the robot monitors movements of the spine throughout the entire surgical procedure and thus enables accurate, safe arthrodesis for the treatment of degenerative lumbar disc diseases, exactly as planned by the surgeon. Development perspectives include (i) assistance at all levels of the spine, (ii) improved planning abilities (virtualization of the entire surgical procedure) and (iii) use for almost any percutaneous spinal procedures not limited in screw positioning such as percutaneous endoscopic lumbar discectomy, intracorporeal implant positioning, over te top laminectomy or radiofrequency ablation.

Evaluation of Oral and Maxillofacial Surgery Residents' Operative Skills: Feasibility and Engagement Study Using SIMPL Software for a Mobile Phone.

PubMed

Kaban, Leonard B; Cappetta, Alyssa; George, Brian C; Lahey, Edward T; Bohnen, Jordan D; Troulis, Maria J

2017-10-01

There are no universally accepted tools to evaluate operative skills of surgical residents in a timely fashion. The purpose of this study was to determine the feasibility of using a smartphone application, SIMPL (System for Improving and Measuring Procedural Learning), developed by a multi-institutional research collaborative, to achieve a high rate of timely operative evaluations and resident communication and to collect performance data. The authors hypothesized that these goals would be achieved because the process is convenient and efficient. This was a prospective feasibility and engagement study using SIMPL to evaluate residents' operative skills. SIMPL requires the attending surgeon to answer 3 multiple-choice questions: 1) What level of help (Zwisch Scale) was required by the trainee? 2) What was the level of performance? 3) How complex was the case? The evaluator also can dictate a narrative. The sample was composed of 3 faculty members and 3 volunteer senior residents. Predictor variables were the surgeons, trainees, and procedures performed. Outcome variables included number and percentage of procedures performed by faculty-and-resident pairs assessed, time required to complete assessments, time lapsed to submission, percentage of assessments with narratives, and residents' response rates. From March through June 2016, 151 procedures were performed in the operating room by the faculty-and-resident teams. There were 107 assessments submitted (71%). Resident response (self-assessment) to faculty evaluations was 81%. Recorded time to complete assessments (n = 75 of 107) was shorter than 2 minutes. The time lapsed to submission was shorter than 72 hours (100%). Dictations were submitted for 35 evaluations (33%). Data for the type of help, performance, and complexity of cases were collected for each resident. SIMPL facilitates timely intraoperative evaluations of surgical skills, engagement by faculty and residents, and collection of detailed procedural data. Additional prospective trials to assess this tool further are planned. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Reactance in affective-evaluative learning: Outside of conscious control?

PubMed

Fulcher, Eamon P; Hammerl, Marianne

2005-02-01

Recent studies have shown that the basic evaluative conditioning (EC) effect (originally neutral stimuli acquiring an affective value congruent with the valence of the affective stimulus they were paired with) seems to be limited to participants who are unaware of the stimulus pairings. If participants are aware of the pairings, reactance effects occur (i.e., changes in the opposite direction of the valence of the affective stimulus). To examine whether these reactance effects are due to processes of conscious countercontrol or whether the ratings reflect intrinsic feelings towards the stimuli, a new procedure was developed that included a bogus-pipeline condition. In this procedure, which was adapted from attitude research, participants were connected to bogus lie detector equipment leading them to believe that their "true" affective-evaluative responses were being observed. In Experiment 1, reactance effects occurred also in this procedure, suggesting that the effect is spontaneous and not due to processes of conscious countercontrol. In Experiment 2, these effects were replicated using a between-subjects design in addition to the standard within-subjects control condition.

In situ impulse test: an experimental and analytical evaluation of data interpretation procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1975-08-01

Special experimental field testing and analytical studies were undertaken at Fort Lawton in Seattle, Washington, to study ''close-in'' wave propagation and evaluate data interpretation procedures for a new in situ impulse test. This test was developed to determine the shear wave velocity and dynamic modulus of soils underlying potential nuclear power plant sites. The test is different from conventional geophysical testing in that the velocity variation with strain is determined for each test. In general, strains between 10/sup -1/ and 10/sup -3/ percent are achieved. The experimental field work consisted of performing special tests in a large test sand fillmore » to obtain detailed ''close-in'' data. Six recording transducers were placed at various points on the energy source, while approximately 37 different transducers were installed within the soil fill, all within 7 feet of the energy source. Velocity measurements were then taken simultaneously under controlled test conditions to study shear wave propagation phenomenology and help evaluate data interpretation procedures. Typical test data are presented along with detailed descriptions of the results.« less

Global environment facility: Independent evaluation of the pilot phase; Fondo para el medio ambiente mundial: evaluacion independiente de la etapa experimental

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-06-01

This study responds to a request by participants in the Global Environment Facility (GEF) for an independent evaluation of the pilot phase. It profiles the GEF, discusses its policy framework, and reviews project development procedures and the strategies and projects in each of the GEF`s four focal areas. The study concludes that fundamental changes must occur and recommends specific reforms, such as articulating more clearly the GEF`s mandate, objectives, and strategies; addressing deficiencies in meeting its global focus; improving capacities and procedures within implementing agencies for managing the portfolio; and increasing non-government organization (NGO), country and community-level participation.

Continued Development and Implementation of the Universal Network Interface Device (UNID) II in the Digital Engineering Laboratory Network (DELNET). Volume 2.

DTIC Science & Technology

1984-12-01

PACKET LO-ATED IN TABLE LCNTTB. INPUT < THE INDUT IS A TWO CHARACTER ASCII VALUE INDICATING THE TABLE REQUIRING EVALUATION . > PROCESSING THIS PROCEDURE...INTO OHANYE A (2). I NPUT THE INPUT IS AN INTEGER VA UE INDICATING’ THE TAlN’LE LOCATI’ OF THE FRAmE TO BE EVALUATED . PROC--SSING THIS PROCEDURE LOU-S AT...GOOD AEXICdLFCL ~N IS NuT rC:L I VED LY THE END OF THE WAIT PER ICOH, I r I S fx>Sit-..) ACAI N UPION IriL NE.XT CflLL THRJOH THIS IRROCEDURE. A [ RAMC OF

The Impact of Vocational Education on Ex-Offenders in Massachusetts. Final Report.

ERIC Educational Resources Information Center

McClain, Thomas W.

A two-year study was undertaken in Massachusetts to evaluate the impact of vocational education on released ex-offenders. In the first year, evaluation procedures and interview instruments were developed, a survey of inmates was conducted, and the data collected was analyzed and summarized in a report. Since the second year of the study was not…

Obtaining Self-Report Data from Cognitively Impaired Elders: Methodological Issues and Clinical Implications for Nursing Home Pain Assessment

ERIC Educational Resources Information Center

Fisher, Susan E.; Burgio, Louis D.; Thorn, Beverly E.; Hardin, J. Michael

2006-01-01

Purpose: We developed and evaluated an explicit procedure for obtaining self-report pain data from nursing home residents across a broad range of cognitive status, and we evaluated the consistency, stability, and concurrent validity of resident responses. Design and Methods: Using a modification of the Geriatric Pain Measure (GPM-M2), we…

33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2011 CFR

2011-07-01

... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2013 CFR

2013-07-01

... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2010 CFR

2010-07-01

... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2014 CFR

2014-07-01

... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

33 CFR 154.1047 - Response plan development and evaluation criteria for facilities that handle, store, or transport...

Code of Federal Regulations, 2012 CFR

2012-07-01

... evaluation criteria for facilities that handle, store, or transport Group V petroleum oils. 154.1047 Section... Group V petroleum oils. (a) An owner or operator of a facility that handles, stores, or transports Group...) Procedures and strategies for responding to a worst case discharge of Group V petroleum oils to the maximum...

A Model Plan for the Supervision and Evaluation of Therapy Services in Educational Settings. TIES: Therapy in Educational Settings.

ERIC Educational Resources Information Center

Reed, Penny; And Others

The manual serves as a model for school districts developing procedures for supervising and evaluating their therapy services. The narrative is addressed to therapists rather than supervisors so that school districts can photocopy or adapt sections of the manual and assemble customized manuals for therapists in their programs. The first chapter,…

Contribution of Awraja Pedagogical Centres in the Improvement of Education in Ethiopia. African Studies in Curriculum Development & Evaluation No. 6.

ERIC Educational Resources Information Center

Habtegaber, Haile

Teachers and teacher center personnel were used to gather evaluative information on Awraja Pedagogical Centers (APCs) in Addis Ababa, Ethiopia. Teachers discussed their access to center facilities and services, and ratings of center materials and personnel. APC staff discussed their work, hours of center operation, procedures followed in the…

Screening for Specific Language Impairment in Preschool Children: Evaluating a Screening Procedure Including the Token Test

ERIC Educational Resources Information Center

Willinger, Ulrike; Schmoeger, Michaela; Deckert, Matthias; Eisenwort, Brigitte; Loader, Benjamin; Hofmair, Annemarie; Auff, Eduard

2017-01-01

Specific language impairment (SLI) comprises impairments in receptive and/or expressive language. Aim of this study was to evaluate a screening for SLI. 61 children with SLI (SLI-children, age-range 4-6 years) and 61 matched typically developing controls were tested for receptive language ability (Token Test-TT) and for intelligence (Wechsler…

Shuttle orbiter Ku-band radar/communications system design evaluation

NASA Technical Reports Server (NTRS)

Dodds, J.; Holmes, J.; Huth, G. K.; Iwasaki, R.; Maronde, R.; Polydoros, A.; Weber, C.; Broad, P.

1980-01-01

Tasks performed in an examination and critique of a Ku-band radar communications system for the shuttle orbiter are reported. Topics cover: (1) Ku-band high gain antenna/widebeam horn design evaluation; (2) evaluation of the Ku-band SPA and EA-1 LRU software; (3) system test evaluation; (4) critical design review and development test evaluation; (5) Ku-band bent pipe channel performance evaluation; (6) Ku-band LRU interchangeability analysis; and (7) deliverable test equipment evaluation. Where discrepancies were found, modifications and improvements to the Ku-band system and the associated test procedures are suggested.

Inactivation of the Hutchinson strain of non-A, non-B hepatitis virus by combined use of beta-propiolactone and ultraviolet irradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prince, A.M.; Stephan, W.; Dichtelmueller, H.B.

1985-06-01

A beta-propiolactone/ultraviolet irradiation procedure (beta PL/UV) has been evaluated for its ability to inactivate 30,000 chimpanzee infectious doses of the Hutchinson strain of non-A, non-B (NANB) virus. The chimpanzees were inoculated with plasma to which this dose of the titrated virus had been added prior to application of the beta PL/UV process in accordance with a procedure used for licensed blood derivatives in Germany. Neither animal developed hepatitis. When subsequently challenged with the same contaminated plasma, which had not been sterilized, both animals promptly developed typical NANB hepatitis. This study extends the high (approximately 10(7)-fold) process efficiency of the betamore » PL/UV procedure previously reported for hepatitis B virus to a blood-borne NANB virus.« less

Imaging and intervention in the gastrointestinal tract in children.

PubMed

Kaye, Robin D; Towbin, R B

2002-09-01

Vascular and interventional techniques have become an integral component of modern pediatric healthcare. Minimally invasive procedures of the gastrointestinal tract now comprise a large part of any active pediatric interventional practice. Magnetic resonance cholangiopancreatography offers a reliable, non-invasive means to evaluate patients with possible pancreatic or biliary pathology. This article reviews treatment of esophageal strictures and placement of gastronomy and gastrojejunostomy tubes and discusses new developments. Placement of percutaneous cecostomy tubes is a relatively new procedure that creatively uses the techniques developed for placement of percutaneous gastronomy tubes. This procedure offers significant benefits and lasting positive lifestyle changes for patients suffering from fecal incontinence. Liver biopsy in high-risk patients can be performed safely using measures designed to significantly decrease the risk of post-biopsy hemorrhage, such as track embolization or the transjugular approach.

Development of a standardized training course for laparoscopic procedures using Delphi methodology.

PubMed

Bethlehem, Martijn S; Kramp, Kelvin H; van Det, Marc J; ten Cate Hoedemaker, Henk O; Veeger, Nicolaas J G M; Pierie, Jean Pierre E N

2014-01-01

Content, evaluation, and certification of laparoscopic skills and procedure training lack uniformity among different hospitals in The Netherlands. Within the process of developing a new regional laparoscopic training curriculum, a uniform and transferrable curriculum was constructed for a series of laparoscopic procedures. The aim of this study was to determine regional expert consensus regarding the key steps for laparoscopic appendectomy and cholecystectomy using Delphi methodology. Lists of suggested key steps for laparoscopic appendectomy and cholecystectomy were created using surgical textbooks, available guidelines, and local practice. A total of 22 experts, working for teaching hospitals throughout the region, were asked to rate the suggested key steps for both procedures on a Likert scale from 1-5. Consensus was reached with Crohnbach's α ≥ 0.90. Of the 22 experts, 21 completed and returned the survey (95%). Data analysis already showed consensus after the first round of Delphi on the key steps for laparoscopic appendectomy (Crohnbach's α = 0.92) and laparoscopic cholecystectomy (Crohnbach's α = 0.90). After the second round, 15 proposed key steps for laparoscopic appendectomy and 30 proposed key steps for laparoscopic cholecystectomy were rated as important (≥4 by at least 80% of the expert panel). These key steps were used for the further development of the training curriculum. By using the Delphi methodology, regional consensus was reached on the key steps for laparoscopic appendectomy and cholecystectomy. These key steps are going to be used for standardized training and evaluation purposes in a new regional laparoscopic curriculum. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Acceptance Testing of Thermoluminescent Dosimeter Holders.

PubMed

Romanyukha, Alexander; Grypp, Matthew D; Sharp, Thad J; DiRito, John N; Nelson, Martin E; Mavrogianis, Stanley T; Torres, Jeancarlo; Benevides, Luis A

2018-05-01

The U.S. Navy uses the Harshaw 8840/8841 dosimetric (DT-702/PD) system, which employs LiF:Mg,Cu,P thermoluminescent dosimeters (TLDs), developed and produced by Thermo Fisher Scientific (TFS). The dosimeter consists of four LiF:Mg,Cu,P elements, mounted in Teflon® on an aluminum card and placed in a plastic holder. The holder contains a unique filter for each chip made of copper, acrylonitrile butadiene styrene (ABS), Mylar®, and tin. For accredited dosimetry labs, the ISO/IEC 17025:2005(E) requires an acceptance procedure for all new equipment. The Naval Dosimetry Center (NDC) has developed and tested a new non-destructive procedure, which enables the verification and the evaluation of embedded filters in the holders. Testing is based on attenuation measurements of low-energy radiation transmitted through each filter in a representative sample group of holders to verify that the correct filter type and thickness are present. The measured response ratios are then compared with the expected response ratios. In addition, each element's measured response is compared to the mean response of the group. The test was designed and tested to identify significant nonconformities, such as missing copper or tin filters, double copper or double tin filters, or other nonconformities that may impact TLD response ratios. During the implementation of the developed procedure, testing revealed a holder with a double copper filter. To complete the evaluation, the impact of the nonconformities on proficiency testing was examined. The evaluation revealed failures in proficiency testing categories III and IV when these dosimeters were irradiated to high-energy betas.

Evaluation of standardized sample collection, packaging, and ...

EPA Pesticide Factsheets

Journal Sample collection procedures and primary receptacle (sample container and bag) decontamination methods should prevent contaminant transfer between contaminated and non-contaminated surfaces and areas during bio-incident operations. Cross-contamination of personnel, equipment, or sample containers may result in the exfiltration of biological agent from the exclusion (hot) zone and have unintended negative consequences on response resources, activities and outcomes. The current study was designed to: (1) evaluate currently recommended sample collection and packaging procedures to identify procedural steps that may increase the likelihood of spore exfiltration or contaminant transfer; (2) evaluate the efficacy of currently recommended primary receptacle decontamination procedures; and (3) evaluate the efficacy of outer packaging decontamination methods. Wet- and dry-deposited fluorescent tracer powder was used in contaminant transfer tests to qualitatively evaluate the currently-recommended sample collection procedures. Bacillus atrophaeus spores, a surrogate for Bacillus anthracis, were used to evaluate the efficacy of spray- and wipe-based decontamination procedures.

Evaluating sufficient similarity for drinking-water disinfection by-product (DBP) mixtures with bootstrap hypothesis test procedures.

PubMed

Feder, Paul I; Ma, Zhenxu J; Bull, Richard J; Teuschler, Linda K; Rice, Glenn

2009-01-01

In chemical mixtures risk assessment, the use of dose-response data developed for one mixture to estimate risk posed by a second mixture depends on whether the two mixtures are sufficiently similar. While evaluations of similarity may be made using qualitative judgments, this article uses nonparametric statistical methods based on the "bootstrap" resampling technique to address the question of similarity among mixtures of chemical disinfectant by-products (DBP) in drinking water. The bootstrap resampling technique is a general-purpose, computer-intensive approach to statistical inference that substitutes empirical sampling for theoretically based parametric mathematical modeling. Nonparametric, bootstrap-based inference involves fewer assumptions than parametric normal theory based inference. The bootstrap procedure is appropriate, at least in an asymptotic sense, whether or not the parametric, distributional assumptions hold, even approximately. The statistical analysis procedures in this article are initially illustrated with data from 5 water treatment plants (Schenck et al., 2009), and then extended using data developed from a study of 35 drinking-water utilities (U.S. EPA/AMWA, 1989), which permits inclusion of a greater number of water constituents and increased structure in the statistical models.

[Health technology assessment (HTA). Developments in healthcare and potential for radiology].

PubMed

Gizewski, E R; Forsting, M; Krombach, G A; Schöffski, O

2014-06-01

Cost-intensive measures and procedures, such as also employed in radiology, have far-reaching economic implications in respect to increasing expenditure with limited resources. Health technology assessment (HTA) describes the systematic evaluation of medical procedures and technologies which in recent years has been introduced by many countries into healthcare politics. In many cases HTA analyses can be directly implemented into practice as shown by the examples given in this article; however, in the current form of HTA the practical implementation for radiology often presents the problem that the cost-benefit ratio does not yet have a comprehensive view in the HTA report but is limited to a subsection, e.g. current costs versus sensitivity of a method. Since its inception radiology has had a high power of innovation and new developments will also substantially determine the future years. These procedures must not only be evaluated with respect to feasibility but also in the sense of the HTA in the total concept. In radiology there are also a large number of possibilities for radiologists not only as passive consumers of HTA reports but also to become active participants in this process, an opportunity which should be taken advantage of.

Reducing Blood Culture Contamination in the Emergency Department: An Interrupted Time Series Quality Improvement Study

PubMed Central

Self, Wesley H.; Speroff, Theodore; Grijalva, Carlos G.; McNaughton, Candace D.; Ashburn, Jacki; Liu, Dandan; Arbogast, Patrick G.; Russ, Stephan; Storrow, Alan B.; Talbot, Thomas R.

2012-01-01

Objectives Blood culture contamination is a common problem in the emergency department (ED) that leads to unnecessary patient morbidity and health care costs. The study objective was to develop and evaluate the effectiveness of a quality improvement (QI) intervention for reducing blood culture contamination in an ED. Methods The authors developed a QI intervention to reduce blood culture contamination in the ED and then evaluated its effectiveness in a prospective interrupted times series study. The QI intervention involved changing the technique of blood culture specimen collection from the traditional clean procedure, to a new sterile procedure, with standardized use of sterile gloves and a new materials kit containing a 2% chlorhexidine skin antisepsis device, a sterile fenestrated drape, a sterile needle, and a procedural checklist. The intervention was implemented in a university-affiliated ED and its effect on blood culture contamination evaluated by comparing the biweekly percentages of blood cultures contaminated during a 48-week baseline period (clean technique), and 48-week intervention period (sterile technique), using segmented regression analysis with adjustment for secular trends and first-order autocorrelation. The goal was to achieve and maintain a contamination rate below 3%. Results During the baseline period, 321 out of 7,389 (4.3%) cultures were contaminated, compared to 111 of 6,590 (1.7%) during the intervention period (p < 0.001). In the segmented regression model, the intervention was associated with an immediate 2.9% (95% CI = 2.2% to 3.2%) absolute reduction in contamination. The contamination rate was maintained below 3% during each biweekly interval throughout the intervention period. Conclusions A QI assessment of ED blood culture contamination led to development of a targeted intervention to convert the process of blood culture collection from a clean to a fully sterile procedure. Implementation of this intervention led to an immediate and sustained reduction of contamination in an ED with a high baseline contamination rate. PMID:23570482

Water conveyance systems in California : historic context development and evaluation procedures

DOT National Transportation Integrated Search

2000-12-01

There is increased awareness that canals and other water conveyance facilities can be historically significant, and that when transportation projects do have the potential to affect them, they need to be studied systematically. However, important wat...

Development of performance indicators for DOTD programs.

DOT National Transportation Integrated Search

1998-05-01

The principal objectives of this study were to evaluate the performance indicators in use at DOTD, to determine if any of these indicators appeared to be deficient, and, if so, to specify those deficiencies identified, to specify a uniform procedure ...

APPLYING TOXICITY IDENTIFICATION PROCEDURES TO FIELD COLLECTED SEDIMENTS

EPA Science Inventory

Identification of specific causes of sediment toxicity can allow for much more focused risk assessment and management decision making. We have been developing toxicity identification evaluation (TIE) methods for contaminated sediments and focusing on three toxicant groups (ammoni...

Development of uniform standards for allowable lane closure : final report, September 2008.

DOT National Transportation Integrated Search

2008-09-01

Procedures for determining allowable lane closure hours to perform maintenance, construction, resurfacing, regional permit and major access permit work on the state highway system were evaluated. The current process involves the collection of traffic...

Assessment of Automatic Fare Collection Equipment at Three European Transit Properties

DOT National Transportation Integrated Search

1982-12-01

This report is an assessment of automatic fare collection (AFC) equipment performance conducted at three European properties in accordance with procedures defined in the Property Evaluation Plan (PEP) developed by Input Output Computer Services, Inc....

Employing Simulation to Evaluate Designs: The APEX Approach

NASA Technical Reports Server (NTRS)

Freed, Michael A.; Shafto, Michael G.; Remington, Roger W.; Null, Cynthia H. (Technical Monitor)

1998-01-01

The key innovations of APEX are its integrated approaches to task analysis, procedure definition, and intelligent, resource-constrained multi-tasking. This paper presents a step-by-step description of how APEX is used, from scenario development through trace analysis.

Social impact assessments: Developing a consolidated conceptual framework

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arce-Gomez, Antonio, E-mail: aarcegomez@swin.edu.au; Donovan, Jerome D., E-mail: jdonovan@swin.edu.au; Bedggood, Rowan E., E-mail: rbedggood@swin.edu.au

Social Impact Assessments (SIAs) have played an increasingly important role in the conduct of planned interventions, providing proponents the capacity to assess and manage the social consequences of their activities. Whilst the SIA field has experienced significant conceptual and practical development over the last decade, efforts at consolidating this within one framework have been limited. In this paper, we incorporate this new knowledge by redeveloping and thus updating the SIA procedural framework developed by Interorganizational Committee on Guidelines and Principles for Social Impact Assessment. In doing so, this updated procedural framework has attempted to incorporate current ‘best practice’ that focusesmore » on participatory approaches to undertaking an SIA. This involved making adaptions to two steps, expansions to five steps, integration of a stronger participatory approach to six steps, and the development of a new step, Management and Evaluation reflecting moves towards ex-post use of SIA processes. It is hoped that this consolidation of the literature of a decade's worth of key findings in SIA research will lead to further efforts towards a meta-evaluation of SIA literature and a platform from which newer developments may be further investigated.« less

Computer-Assisted Instruction in the Context of the Advanced Instructional System. Part II. Materials Development Procedures and System Evaluation.

DTIC Science & Technology

1980-03-01

authoring system which would provide a basis for the cost effective production of computer-assisted irstruction (CAI) materials, It addresses the definition...RESULTS- - ------------------- 58 CAI Materials Development Times - - - 5J CAI Module Instructional Effectiveness -------- -- 59 First-Pass Module...CONCLUSIONS AND RECOMMENDATIONS ------ --- -- -- 70 Effectiveness of the Authoring System and Suggestions for Further Development - ----- --- -- --- 70