Predicting Voice Disorder Status From Smoothed Measures of Cepstral Peak Prominence Using Praat and Analysis of Dysphonia in Speech and Voice (ADSV).

PubMed

Sauder, Cara; Bretl, Michelle; Eadie, Tanya

2017-09-01

The purposes of this study were to (1) determine and compare the diagnostic accuracy of a single acoustic measure, smoothed cepstral peak prominence (CPPS), to predict voice disorder status from connected speech samples using two software systems: Analysis of Dysphonia in Speech and Voice (ADSV) and Praat; and (2) to determine the relationship between measures of CPPS generated from these programs. This is a retrospective cross-sectional study. Measures of CPPS were obtained from connected speech recordings of 100 subjects with voice disorders and 70 nondysphonic subjects without vocal complaints using commercially available ADSV and freely downloadable Praat software programs. Logistic regression and receiver operating characteristic (ROC) analyses were used to evaluate and compare the diagnostic accuracy of CPPS measures. Relationships between CPPS measures from the programs were determined. Results showed acceptable overall accuracy rates (75% accuracy, ADSV; 82% accuracy, Praat) and area under the ROC curves (area under the curve [AUC] = 0.81, ADSV; AUC = 0.91, Praat) for predicting voice disorder status, with slight differences in sensitivity and specificity. CPPS measures derived from Praat were uniquely predictive of disorder status above and beyond CPPS measures from ADSV (χ 2 (1) = 40.71, P < 0.001). CPPS measures from both programs were significantly and highly correlated (r = 0.88, P < 0.001). A single acoustic measure of CPPS was highly predictive of voice disorder status using either program. Clinicians may consider using CPPS to complement clinical voice evaluation and screening protocols. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

Application of remote sensing to state and regional problems. [mississippi

NASA Technical Reports Server (NTRS)

Miller, W. F.; Powers, J. S.; Clark, J. R.; Solomon, J. L.; Williams, S. G. (Principal Investigator)

1981-01-01

The methods and procedures used, accomplishments, current status, and future plans are discussed for each of the following applications of LANDSAT in Mississippi: (1) land use planning in Lowndes County; (2) strip mine inventory and reclamation; (3) white-tailed deer habitat evaluation; (4) remote sensing data analysis support systems; (5) discrimination of unique forest habitats in potential lignite areas; (6) changes in gravel operations; and (7) determining freshwater wetlands for inventory and monitoring. The documentation of all existing software and the integration of the image analysis and data base software into a single package are now considered very high priority items.

Specifications for a Federal Information Processing Standard Data Dictionary System

NASA Technical Reports Server (NTRS)

Goldfine, A.

1984-01-01

The development of a software specification that Federal agencies may use in evaluating and selecting data dictionary systems (DDS) is discussed. To supply the flexibility needed by widely different applications and environments in the Federal Government, the Federal Information Processing Standard (FIPS) specifies a core DDS together with an optimal set of modules. The focus and status of the development project are described. Functional specifications for the FIPS DDS are examined for the dictionary, the dictionary schema, and the dictionary processing system. The DDS user interfaces and DDS software interfaces are discussed as well as dictionary administration.

TREHS (Temporary Rivers Ecological and Hydrological Status): new software for investigating the degree of hydrologic alteration of temporary streams.

NASA Astrophysics Data System (ADS)

Gallart, Francesc; Llorens, Pilar; Cid, Núria; latron, Jérôme; Bonada, Núria; Prat, Narcís

2017-04-01

The evaluation of the hydrological alteration of a stream due to human activities is a first step to assess its overall quality and to design management strategies for its potential restoration. This task is currently made comparing impacted against unimpacted hydrographs, with the help of software tools, such as the IHA (Indicators of Hydrologic Alteration). Then, the environmental evaluation of the hydrological alteration is to be made in terms of its expectable menace for the original biological communities and/or its help for the spread of invasive species. However, when the regime of the target stream is not perennial, there are four main difficulties for implementing methods for assessing hydrological alteration: i) the main hydrological features relevant for biological communities in a temporary stream are not quantitative (discharges) but qualitative (temporal patterns of states such as flowing water, stagnant pools or lack of surface water), ii) stream flow records do not inform on the temporal occurrence of stagnant pools, which act as refugees for many species during the cessation of flow, iii) as most of the temporary streams are ungauged, the evaluation of their regime must be determined by using alternative methods such as remote sensing or citizen science, and iv) the biological quality assessment of the ecological status of a temporary stream must be conducted following a sampling schedule adapted to the flow regime and using adequate reference conditions. In order to overcome these challenges using an operational approach, the TREHS freely available software tool has been developed within the EU LIFE TRIVERS project (LIFE13 ENV/ES/000341). This software allows for the input of information coming from flow simulations obtained using any rainfall-runoff model (to set an unimpacted reference stream regime) and compares them with the information obtained from flow gauging records, interviews made to local citizens, instantaneous observations made by individuals, and by interpretation of aerial photographs. Up to six metrics defining the permanence of water flow, the presence of stagnant pools and their temporal patterns of occurrence are used to determine the natural and observed river regime, and to assess the degree of hydrological alteration. Here, given the lack of agreed standards to evaluate the ecological relevance of the observed alterations, the thresholds that define quality class boundaries are provisional and may be updated using expert knowledge. Finally, the software characterizes the differences between the natural and actual regimes, performs a diagnosis of the hydrological status (degree of hydrologic alteration) along with an assessment of the significance and robustness of the diagnosis, and recommends the best period for biological quality samplings.

Hardware/software codesign for embedded RISC core

NASA Astrophysics Data System (ADS)

Liu, Peng

2001-12-01

This paper describes hardware/software codesign method of the extendible embedded RISC core VIRGO, which based on MIPS-I instruction set architecture. VIRGO is described by Verilog hardware description language that has five-stage pipeline with shared 32-bit cache/memory interface, and it is controlled by distributed control scheme. Every pipeline stage has one small controller, which controls the pipeline stage status and cooperation among the pipeline phase. Since description use high level language and structure is distributed, VIRGO core has highly extension that can meet the requirements of application. We take look at the high-definition television MPEG2 MPHL decoder chip, constructed the hardware/software codesign virtual prototyping machine that can research on VIRGO core instruction set architecture, and system on chip memory size requirements, and system on chip software, etc. We also can evaluate the system on chip design and RISC instruction set based on the virtual prototyping machine platform.

PLUME-FEATHER, Referencing and Finding Software for Research and Education

NASA Astrophysics Data System (ADS)

Bénassy, O.; Caron, C.; Ferret-Canape, C.; Cheylus, A.; Courcelle, E.; Dantec, C.; Dayre, P.; Dostes, T.; Durand, A.; Facq, A.; Gambini, G.; Geahchan, E.; Helft, C.; Hoffmann, D.; Ingarao, M.; Joly, P.; Kieffer, J.; Larré, J.-M.; Libes, M.; Morris, F.; Parmentier, H.; Pérochon, L.; Porte, O.; Romier, G.; Rousse, D.; Tournoy, R.; Valeins, H.

2014-06-01

PLUME-FEATHER is a non-profit project created to Promote economicaL, Useful and Maintained softwarEFor theHigher Education And THE Research communities. The site references software, mainly Free/Libre Open Source Software (FLOSS) from French universities and national research organisations, (CNRS, INRA...), laboratories or departments as well as other FLOSS software used and evaluated by users within these institutions. Each software is represented by a reference card, which describes origin, aim, installation, cost (if applicable) and user experience from the point of view of an academic user for academic users. Presently over 1000 programs are referenced on PLUME by more than 900 contributors. Although the server is maintained by a French institution, it is open to international contributions in the academic domain. All contained and validated contents are visible to anonymous public, whereas (presently more than 2000) registered users can contribute, starting with comments on single software reference cards up to help with the organisation and presentation of the referenced software products. The project has been presented to the HEP community in 2012 for the first time [1]. This is an update of the status and a call for (further) contributions.

Information technologies in optimization process of monitoring of software and hardware status

NASA Astrophysics Data System (ADS)

Nikitin, P. V.; Savinov, A. N.; Bazhenov, R. I.; Ryabov, I. V.

2018-05-01

The article describes a model of a hardware and software monitoring system for a large company that provides customers with software as a service (SaaS solution) using information technology. The main functions of the monitoring system are: provision of up-todate data for analyzing the state of the IT infrastructure, rapid detection of the fault and its effective elimination. The main risks associated with the provision of these services are described; the comparative characteristics of the software are given; author's methods of monitoring the status of software and hardware are proposed.

Software for computerised analysis of cardiotocographic traces.

PubMed

Romano, M; Bifulco, P; Ruffo, M; Improta, G; Clemente, F; Cesarelli, M

2016-02-01

Despite the widespread use of cardiotocography in foetal monitoring, the evaluation of foetal status suffers from a considerable inter and intra-observer variability. In order to overcome the main limitations of visual cardiotocographic assessment, computerised methods to analyse cardiotocographic recordings have been recently developed. In this study, a new software for automated analysis of foetal heart rate is presented. It allows an automatic procedure for measuring the most relevant parameters derivable from cardiotocographic traces. Simulated and real cardiotocographic traces were analysed to test software reliability. In artificial traces, we simulated a set number of events (accelerations, decelerations and contractions) to be recognised. In the case of real signals, instead, results of the computerised analysis were compared with the visual assessment performed by 18 expert clinicians and three performance indexes were computed to gain information about performances of the proposed software. The software showed preliminary performance we judged satisfactory in that the results matched completely the requirements, as proved by tests on artificial signals in which all simulated events were detected from the software. Performance indexes computed in comparison with obstetricians' evaluations are, on the contrary, not so satisfactory; in fact they led to obtain the following values of the statistical parameters: sensitivity equal to 93%, positive predictive value equal to 82% and accuracy equal to 77%. Very probably this arises from the high variability of trace annotation carried out by clinicians. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Systems design and comparative analysis of large antenna concepts

NASA Technical Reports Server (NTRS)

Garrett, L. B.; Ferebee, M. J., Jr.

1983-01-01

Conceptual designs are evaluated and comparative analyses conducted for several large antenna spacecraft for Land Mobile Satellite System (LMSS) communications missions. Structural configurations include trusses, hoop and column and radial rib. The study was conducted using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system. The current capabilities, development status, and near-term plans for the IDEAS system are reviewed. Overall capabilities are highlighted. IDEAS is an integrated system of computer-aided design and analysis software used to rapidly evaluate system concepts and technology needs for future advanced spacecraft such as large antennas, platforms, and space stations. The system was developed at Langley to meet a need for rapid, cost-effective, labor-saving approaches to the design and analysis of numerous missions and total spacecraft system options under consideration. IDEAS consists of about 40 technical modules efficient executive, data-base and file management software, and interactive graphics display capabilities.

[Prediction of the nutritional status by anthropometrical variables and food safety at homes of pregnant women from Caracas, Venezuela].

PubMed

Pérez Guillén, A; Bernal Rivas, J

2006-01-01

The objective of this research is to analyze the nutritional status and household food security of a sample of healthy pregnant women who attend to external medicine service at Concepcion Palacios Maternity located in Caracas, Venezuela, and identify variables, which could predict the nutritional status of the evaluated group. This cross sectional, descriptive, comparative study evaluates a sample of 89 pregnant women, between 14 and 44 years of age. Economical, social, demographic and alimentary consumption variables and nutritional conditions were studied. On the way, anthropometrics like weight, height, and middle-arm circumference and Household food security scale were obtained. In order to perform the descriptive statistic, bivariate, and multiple linear regression analysis required during the investigation, the software SPSS, version 12, was used. The predictive variables considered for the evaluation of the actual nutritional status in pregnant women were: right middle-arm circumference, household food security level and the supplementation with vitamins and/or minerals. These variables explain 78.2% of the actual nutritional status variation in this sample. Therefore, this investigation highlights the importance of the research on simple variables, as a good prediction of the actual nutritional status in pregnant women, with acceptable precision values and without requiring high-trained personnel to perform it. Under these findings, is very important the study of more predictive variables to evaluate the nutritional and alimentary conditions, with practical and easy mechanisms that can be applied by non-technical personnel. It is recommended to go deep into the study of methods, which evaluate the nutrition in an easy and practical way, applied by non-technical personnel, besides continuing the validation process of the variable combinations determined as predictive of the nutritional status.

Assessment of hydration status using bioelectrical impedance vector analysis in critical patients with acute kidney injury.

PubMed

Hise, Ana Cláudia da Rosa; Gonzalez, Maria Cristina

2018-04-01

The state of hyperhydration in critically ill patients with acute kidney injury (AKI) is associated with increased mortality. Bioelectrical impedance vector analysis (BIVA) appears to be a viable method to access the fluid status of critical patients but has never been evaluated in critical patients with AKI. The objective of this study is to evaluate the hydration status measured using BIVA in critical patients under intensive care at the time of AKI diagnosis and to correlate this measurement with mortality. We assessed the fluid status measured using BIVA in 224 critical patients at the time of AKI diagnosis and correlated it with mortality. To interpret the results, BIVA Software 2002 was used to plot the data from the patients studied on the 95% confidence ellipses of the RX c plane for comparisons between groups (non-survivors, survivors). Variables such as mechanical ventilation, vasoactive drug, and sepsis, among others, were collected. The impedance vector analysis conducted using BIVA Software 2002 indicated changes in the body compositions of patients according to the 95% confidence ellipse between the vectors R/H and X c /H of the group of survivors and the group of deceased patients. Hotelling's test (T 2  = 21.2) and the F test (F = 10.6) revealed significant differences (p < 0.001) between the two groups. These results demonstrate that patients who died presented with a greater hydration volume at the time of AKI diagnosis compared with those who survived. In addition to the hydration status measured using BIVA, the following were also correlated with death: diagnosis at hospitalization, APACHE II score, length of hospital stay, RIFLE score, maximum organ failure, sepsis type, hemoglobin, and AF. The fluid status assessment measured using BIVA significantly demonstrated the difference in hydration between survivors and non-survivors among critically ill patients with AKI. Copyright © 2017 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

GNAS Maintenance Control Center (GMCC) Design Qualification Test and Evaluation (DQT&E) Test Procedures

DTIC Science & Technology

1992-06-01

connected to one MPS via BROUTERS and modems ). b. MPS - RMMS interface to the GMCC. The IMCS software running on the MPS will.be used to monitor the...Start Date: TODAYS DATE REGION: SO Sector: 56K 69. GPWS: Press FI0 (PRODUCE REPORT) to generate the report. 70. GPWS: Press F12 (REPORT STATUS) to

Quantitative CMMI Assessment for Offshoring through the Analysis of Project Management Repositories

NASA Astrophysics Data System (ADS)

Sunetnanta, Thanwadee; Nobprapai, Ni-On; Gotel, Olly

The nature of distributed teams and the existence of multiple sites in offshore software development projects pose a challenging setting for software process improvement. Often, the improvement and appraisal of software processes is achieved through a turnkey solution where best practices are imposed or transferred from a company’s headquarters to its offshore units. In so doing, successful project health checks and monitoring for quality on software processes requires strong project management skills, well-built onshore-offshore coordination, and often needs regular onsite visits by software process improvement consultants from the headquarters’ team. This paper focuses on software process improvement as guided by the Capability Maturity Model Integration (CMMI) and proposes a model to evaluate the status of such improvement efforts in the context of distributed multi-site projects without some of this overhead. The paper discusses the application of quantitative CMMI assessment through the collection and analysis of project data gathered directly from project repositories to facilitate CMMI implementation and reduce the cost of such implementation for offshore-outsourced software development projects. We exemplify this approach to quantitative CMMI assessment through the analysis of project management data and discuss the future directions of this work in progress.

Do Acute Myocardial Infarction and Heart Failure Readmissions Flagged as Potentially Preventable by the 3M Potentially Preventable Readmissions Software Have More Process-of-Care Problems?

PubMed

Borzecki, Ann M; Chen, Qi; Mull, Hillary J; Shwartz, Michael; Bhatt, Deepak L; Hanchate, Amresh; Rosen, Amy K

2016-09-01

The 3M Potentially Preventable Readmissions (3M-PPR) software matches clinically related index admission and readmission diagnoses that may signify in-hospital or postdischarge quality problems. To assess whether the PPR algorithm identifies preventable readmissions, we compared processes of care between PPR software-flagged and nonflagged cases. Using 2006 to 2010 national VA administrative data, we identified acute myocardial infarction and heart failure discharges associated with 30-day all-cause readmissions, then flagged cases (PPR-Yes/PPR-No) using the 3M-PPR software. To assess care quality, we abstracted medical records of 100 readmissions per condition using tools containing explicit processes organized into admission work-up, in-hospital evaluation/treatment, discharge readiness, postdischarge period. We derived quality scores, scaled to a maximum of 25 per section (maximum total score=100) and compared cases on total and section-specific mean scores. For acute myocardial infarction, 77 of 100 cases were flagged as PPR-Yes. Section quality scores were highest for in-hospital evaluation/treatment (20.5±2.8) and lowest for postdischarge care (6.8±9.1). Total and section-related mean scores did not differ by PPR status; respective PPR-Yes versus PPR-No total scores were 61.6±11.1 and 60.4±9.4; P=0.98. For heart failure, 86 of 100 cases were flagged as PPR-Yes. Section scores were highest for discharge readiness (18.8±2.4) and lowest for postdischarge care (7.3±8.1). Like acute myocardial infarction, total and section-related mean scores did not differ by PPR status; PPR-Yes versus PPR-No total scores were 61.2±10.8 and 63.4±7.0, respectively; P=0.47. Among VA acute myocardial infarction and heart failure readmissions, the 3M-PPR software does not distinguish differences in case-level quality of care. Whether 3M-PPR software better identifies preventable readmissions by using other methods to capture poorly documented processes or performing different comparisons requires further study. © 2016 American Heart Association, Inc.

Mapping modern software process engineering techniques onto an HEP development environment

NASA Astrophysics Data System (ADS)

Wellisch, J. P.

2003-04-01

One of the most challenging issues faced in HEP in recent years is the question of how to capitalise on software development and maintenance experience in a continuous manner. To capitalise means in our context to evaluate and apply new process technologies as they arise, and to further evolve technologies already widely in use. It also implies the definition and adoption of standards. The CMS off-line software improvement effort aims at continual software quality improvement, and continual improvement in the efficiency of the working environment with the goal to facilitate doing great new physics. To achieve this, we followed a process improvement program based on ISO-15504, and Rational Unified Process. This experiment in software process improvement in HEP has been progressing now for a period of 3 years. Taking previous experience from ATLAS and SPIDER into account, we used a soft approach of continuous change within the limits of current culture to create of de facto software process standards within the CMS off line community as the only viable route to a successful software process improvement program in HEP. We will present the CMS approach to software process improvement in this process R&D, describe lessons learned, and mistakes made. We will demonstrate the benefits gained, and the current status of the software processes established in CMS off-line software.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kowalkowski, Jim; Lyon, Adam; Paterno, Marc

Over the past few years, container technology has become increasingly promising as a means to seamlessly make our software available across a wider range of platforms. In December 2015, we decided to put together a set of docker images that serve as a demonstration of this container technology for managing a run-time environment for art-related software projects, and also serve as a set of test cases for evaluation of performance. Docker[1] containers provide a way to “wrap up a piece of software in a complete filesystem that contains everything it needs to run”. In combination with Shifter[2], such containers providemore » a way to run software developed and deployed on “typical” HEP platforms (such as SLF 6, in common use at Fermilab and on OSG platforms) on HPC facilities at NERSC. Docker containers provide a means of delivering software that can be run on a variety of hosts without needing to be compiled specially for each OS to be supported. This could substantially reduce the effort required to create and validate a new release, since one build could be suitable for use on both grid machines (both FermiGrid and OSG) as well as any machine capable of running the Docker container. In addition, docker containers may provide for a quick and easy way for users to install and use a software release in a standardized environment. This report contains the results and status of this demonstration and evaluation.« less

Development and evaluation of a Fault-Tolerant Multiprocessor (FTMP) computer. Volume 2: FTMP software

NASA Technical Reports Server (NTRS)

Lala, J. H.; Smith, T. B., III

1983-01-01

The software developed for the Fault-Tolerant Multiprocessor (FTMP) is described. The FTMP executive is a timer-interrupt driven dispatcher that schedules iterative tasks which run at 3.125, 12.5, and 25 Hz. Major tasks which run under the executive include system configuration control, flight control, and display. The flight control task includes autopilot and autoland functions for a jet transport aircraft. System Displays include status displays of all hardware elements (processors, memories, I/O ports, buses), failure log displays showing transient and hard faults, and an autopilot display. All software is in a higher order language (AED, an ALGOL derivative). The executive is a fully distributed general purpose executive which automatically balances the load among available processor triads. Provisions for graceful performance degradation under processing overload are an integral part of the scheduling algorithms.

Automated support for experience-based software management

NASA Technical Reports Server (NTRS)

Valett, Jon D.

1992-01-01

To effectively manage a software development project, the software manager must have access to key information concerning a project's status. This information includes not only data relating to the project of interest, but also, the experience of past development efforts within the environment. This paper describes the concepts and functionality of a software management tool designed to provide this information. This tool, called the Software Management Environment (SME), enables the software manager to compare an ongoing development effort with previous efforts and with models of the 'typical' project within the environment, to predict future project status, to analyze a project's strengths and weaknesses, and to assess the project's quality. In order to provide these functions the tool utilizes a vast corporate memory that includes a data base of software metrics, a set of models and relationships that describe the software development environment, and a set of rules that capture other knowledge and experience of software managers within the environment. Integrating these major concepts into one software management tool, the SME is a model of the type of management tool needed for all software development organizations.

Somatostatin receptor immunohistochemistry in neuroendocrine tumors: comparison between manual and automated evaluation

PubMed Central

Daniel, Kaemmerer; Maria, Athelogou; Amelie, Lupp; Isabell, Lenhardt; Stefan, Schulz; Luisa, Peter; Merten, Hommann; Vikas, Prasad; Gerd, Binnig; Paul, Baum Richard

2014-01-01

Background: Manual evaluation of somatostatin receptor (SSTR) immunohistochemistry (IHC) is a time-consuming and cost-intensive procedure. Aim of the study was to compare manual evaluation of SSTR subtype IHC to an automated software-based analysis, and to in-vivo imaging by SSTR-based PET/CT. Methods: We examined 25 gastroenteropancreatic neuroendocrine tumor (GEP-NET) patients and correlated their in-vivo SSTR-PET/CT data (determined by the standardized uptake values SUVmax,-mean) with the corresponding ex-vivo IHC data of SSTR subtype (1, 2A, 4, 5) expression. Exactly the same lesions were imaged by PET/CT, resected and analyzed by IHC in each patient. After manual evaluation, the IHC slides were digitized and automatically evaluated for SSTR expression by Definiens XD software. A virtual IHC score “BB1” was created for comparing the manual and automated analysis of SSTR expression. Results: BB1 showed a significant correlation with the corresponding conventionally determined Her2/neu score of the SSTR-subtypes 2A (rs: 0.57), 4 (rs: 0.44) and 5 (rs: 0.43). BB1 of SSTR2A also significantly correlated with the SUVmax (rs: 0.41) and the SUVmean (rs: 0.50). Likewise, a significant correlation was seen between the conventionally evaluated SSTR2A status and the SUVmax (rs: 0.42) and SUVmean (rs: 0.62).Conclusion: Our data demonstrate that the evaluation of the SSTR status by automated analysis (BB1 score), using digitized histopathology slides (“virtual microscopy”), corresponds well with the SSTR2A, 4 and 5 expression as determined by conventional manual histopathology. The BB1 score also exhibited a significant association to the SSTR-PET/CT data in accordance with the high affinity profile of the SSTR analogues used for imaging. PMID:25197368

[Evaluation and impact on the use of information and communication technology in the clinical management and agreed shared monitoring of pressure ulcers].

PubMed

Bueno Yáñez, Olga; Rodríguez Arrieta, Jimena; Bagüés Bafaluy, Miren I; Calvo Aguirre, Juan José

2015-01-01

Tackling the huge problem of Pressure Ulcers (PU), involves looking for new recording methods and strategies, as well as the standardization of the assessment and intervention criteria. In this context, a specific software application for PU management has been developed and was used for assessing its acceptability, usefulness and applicability by professional nurses from three residential homes for the elderly over a period of one year. A software application is designed and evaluated. This software application allows health professionals to: Manage and monitor PUs.; to determine the risk of PUs; and perform a nutritional status screen, based on a comprehensive data collection, processing and interpretation. It also allows health professionals to exchange data between themselves and at different care levels, which could provide a new approach based on the use of ICT as a tool for an agreement to shared care. This approach has an important journey ahead in terms of its assessment, to which we attempt to contribute through this article. Three centres and 69 residents are taking part in this project. During these processes, 27 nutritional status screens and 22 PU risk assessments, as well as the monitoring of 230 PUs have been performed. Nurses professionals think that the system is useful, easy to use, and perceive that it improves patient monitoring, but not relationship between professionals. Moreover, they would like to makethe web a more powerful part of the application and to speed up the procedures. Copyright © 2014 SEGG. Published by Elsevier Espana. All rights reserved.

Evaluation of smoking status identification using electronic health records and open-text information in a large mental health case register.

PubMed

Wu, Chia-Yi; Chang, Chin-Kuo; Robson, Debbie; Jackson, Richard; Chen, Shaw-Ji; Hayes, Richard D; Stewart, Robert

2013-01-01

High smoking prevalence is a major public health concern for people with mental disorders. Improved monitoring could be facilitated through electronic health record (EHR) databases. We evaluated whether EHR information held in structured fields might be usefully supplemented by open-text information. The prevalence and correlates of EHR-derived current smoking in people with severe mental illness were also investigated. All cases had been referred to a secondary mental health service between 2008-2011 and received a diagnosis of schizophreniform or bipolar disorder. The study focused on those aged over 15 years who had received active care from the mental health service for at least a year (N=1,555). The 'CRIS-IE-Smoking' application used General Architecture for Text Engineering (GATE) natural language processing software to extract smoking status information from open-text fields. A combination of CRIS-IE-Smoking with data from structured fields was evaluated for coverage and the prevalence and demographic correlates of current smoking were analysed. Proportions of patients with recorded smoking status increased from 11.6% to 64.0% through supplementing structured fields with CRIS-IE-Smoking data. The prevalence of current smoking was 59.6% in these 995 cases for whom this information was available. After adjustment, younger age (below 65 years), male sex, and non-cohabiting status were associated with current smoking status. A natural language processing application substantially improved routine EHR data on smoking status above structured fields alone and could thus be helpful in improving monitoring of this lifestyle behaviour. However, limited information on smoking status remained a challenge.

IAC level "O" program development

NASA Technical Reports Server (NTRS)

Vos, R. G.

1982-01-01

The current status of the IAC development activity is summarized. The listed prototype software and documentation was delivered, and details were planned for development of the level 1 operational system. The planned end product IAC is required to support LSST design analysis and performance evaluation, with emphasis on the coupling of required technical disciplines. The long term IAC effectively provides two distinct features: a specific set of analysis modules (thermal, structural, controls, antenna radiation performance and instrument optical performance) that will function together with the IAC supporting software in an integrated and user friendly manner; and a general framework whereby new analysis modules can readily be incorporated into IAC or be allowed to communicate with it.

RELAP-7 Software Verification and Validation Plan - Requirements Traceability Matrix (RTM) Part 2: Code Assessment Strategy, Procedure, and RTM Update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoo, Jun Soo; Choi, Yong Joon; Smith, Curtis Lee

2016-09-01

This document addresses two subjects involved with the RELAP-7 Software Verification and Validation Plan (SVVP): (i) the principles and plan to assure the independence of RELAP-7 assessment through the code development process, and (ii) the work performed to establish the RELAP-7 assessment plan, i.e., the assessment strategy, literature review, and identification of RELAP-7 requirements. Then, the Requirements Traceability Matrices (RTMs) proposed in previous document (INL-EXT-15-36684) are updated. These RTMs provide an efficient way to evaluate the RELAP-7 development status as well as the maturity of RELAP-7 assessment through the development process.

Introduction of structural health and safety monitoring warning systems for Shenzhen-Hong Kong Western Corridor Shenzhen Bay Bridge

NASA Astrophysics Data System (ADS)

Li, N.; Zhang, X. Y.; Zhou, X. T.; Leng, J.; Liang, Z.; Zheng, C.; Sun, X. F.

2008-03-01

Though the brief introduction of the completed structural health and safety monitoring warning systems for Shenzhen-Hongkong western corridor Shenzhen bay highway bridge (SZBHMS), the self-developed system frame, hardware and software scheme of this practical research project are systematically discussed in this paper. The data acquisition and transmission hardware and the basic software based on the NI (National Instruments) Company virtual instruments technology were selected in this system, which adopted GPS time service receiver technology and so on. The objectives are to establish the structural safety monitoring and status evaluation system to monitor the structural responses and working conditions in real time and to analyze the structural working statue using information obtained from the measured data. It will be also provided the scientific decision-making bases for the bridge management and maintenance. Potential technical approaches to the structural safety warning systems, status identification and evaluation method are presented. The result indicated that the performance of the system has achieved the desired objectives, ensure the longterm high reliability, real time concurrence and advanced technology of SZBHMS. The innovate achievement which is the first time to implement in domestic, provide the reference for long-span bridge structural health and safety monitoring warning systems design.

A second generation experiment in fault-tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1986-01-01

Information was collected on the efficacy of fault-tolerant software by conducting two large-scale controlled experiments. In the first, an empirical study of multi-version software (MVS) was conducted. The second experiment is an empirical evaluation of self testing as a method of error detection (STED). The purpose ot the MVS experiment was to obtain empirical measurement of the performance of multi-version systems. Twenty versions of a program were prepared at four different sites under reasonably realistic development conditions from the same specifications. The purpose of the STED experiment was to obtain empirical measurements of the performance of assertions in error detection. Eight versions of a program were modified to include assertions at two different sites under controlled conditions. The overall structure of the testing environment for the MVS experiment and its status are described. Work to date in the STED experiment is also presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gastelum, Zoe N.; Harvey, Julia B.

The International Atomic Energy Agency State Evaluation Process: The Role of Information Analysis in Reaching Safeguards Conclusions (Mathews et al. 2008), several examples of nonproliferation models using analytical software were developed that may assist the IAEA with collecting, visualizing, analyzing, and reporting information in support of the State Evaluation Process. This paper focuses on one of the examples a set of models developed in the Proactive Scenario Production, Evidence Collection, and Testing (ProSPECT) software that evaluates the status and nature of a state’s nuclear activities. The models use three distinct subject areas to perform this assessment: the presence of nuclearmore » activities, the consistency of those nuclear activities with national nuclear energy goals, and the geopolitical context in which those nuclear activities are taking place. As a proof-of-concept for the models, a crude case study was performed. The study, which attempted to evaluate the nuclear activities taking place in Syria prior to September 2007, yielded illustrative, yet inconclusive, results. Due to the inconclusive nature of the case study results, changes that may improve the model’s efficiency and accuracy are proposed.« less

How can GPs drive software changes to improve healthcare for Aboriginal and Torres Strait Islanders peoples?

PubMed

Kehoe, Helen

2017-01-01

Changes to the software used in general practice could improve the collection of the Aboriginal and Torres Strait Islander status of all patients, and boost access to healthcare measures specifically for Aboriginal and Torres Strait Islander peoples provided directly or indirectly by general practitioners (GPs). Despite longstanding calls for improvements to general practice software to better support Aboriginal and Torres Strait Islander health, little change has been made. The aim of this article is to promote software improvements by identifying desirable software attributes and encouraging GPs to promote their adoption. Establishing strong links between collecting Aboriginal and Torres Strait Islander status, clinical decision supports, and uptake of GP-mediated health measures specifically for Aboriginal and Torres Strait Islander peoples - and embedding these links in GP software - is a long overdue reform. In the absence of government initiatives in this area, GPs are best placed to advocate for software changes, using the model described here as a starting point for action.

WISE: Automated support for software project management and measurement. M.S. Thesis

NASA Technical Reports Server (NTRS)

Ramakrishnan, Sudhakar

1995-01-01

One important aspect of software development and IV&V is measurement. Unless a software development effort is measured in some way, it is difficult to judge the effectiveness of current efforts and predict future performances. Collection of metrics and adherence to a process are difficult tasks in a software project. Change activity is a powerful indicator of project status. Automated systems that can handle change requests, issues, and other process documents provide an excellent platform for tracking the status of the project. A World Wide Web based architecture is developed for (a) making metrics collection an implicit part of the software process, (b) providing metric analysis dynamically, (c) supporting automated tools that can complement current practices of in-process improvement, and (d) overcoming geographical barrier. An operational system (WISE) instantiates this architecture allowing for the improvement of software process in a realistic environment. The tool tracks issues in software development process, provides informal communication between the users with different roles, supports to-do lists (TDL), and helps in software process improvement. WISE minimizes the time devoted to metrics collection, analysis, and captures software change data. Automated tools like WISE focus on understanding and managing the software process. The goal is improvement through measurement.

Educational Software: A Developer's Perspective.

ERIC Educational Resources Information Center

Armstrong, Timothy C.; Loane, Russell F.

1994-01-01

Examines the current status and short-term future of computer software development in higher education. Topics discussed include educational advantages of software; current program development techniques, including object oriented programming; and market trends, including IBM versus Macintosh and multimedia programs. (LRW)

An experience of qualified preventive screening: shiraz smart screening software.

PubMed

Islami Parkoohi, Parisa; Zare, Hashem; Abdollahifard, Gholamreza

2015-01-01

Computerized preventive screening software is a cost effective intervention tool to address non-communicable chronic diseases. Shiraz Smart Screening Software (SSSS) was developed as an innovative tool for qualified screening. It allows simultaneous smart screening of several high-burden chronic diseases and supports reminder notification functionality. The extent in which SSSS affects screening quality is also described. Following software development, preventive screening and annual health examinations of 261 school staff (Medical School of Shiraz, Iran) was carried out in a software-assisted manner. To evaluate the quality of the software-assisted screening, we used quasi-experimental study design and determined coverage, irregular attendance and inappropriateness proportions in relation with the manual and software-assisted screening as well as the corresponding number of requested tests. In manual screening method, 27% of employees were covered (with 94% irregular attendance) while by software-assisted screening, the coverage proportion was 79% (attendance status will clear after the specified time). The frequency of inappropriate screening test requests, before the software implementation, was 41.37% for fasting plasma glucose, 41.37% for lipid profile, 0.84% for occult blood, 0.19% for flexible sigmoidoscopy/colonoscopy, 35.29% for Pap smear, 19.20% for mammography and 11.2% for prostate specific antigen. All of the above were corrected by the software application. In total, 366 manual screening and 334 software-assisted screening tests were requested. SSSS is an innovative tool to improve the quality of preventive screening plans in terms of increased screening coverage, reduction in inappropriateness and the total number of requested tests.

Real-time Data Streams from ``e-RemoteCtrl'' to Central VLBI Network Status Monitoring Services Like IVS Live

NASA Astrophysics Data System (ADS)

Neidhardt, Alexander; Collioud, Arnaud

2014-12-01

A central VLBI network status monitoring can be realized by using online status information about current VLBI sessions, real-time, and status data directly from each radio telescope. Such monitoring helps to organize sessions or to get immediate feedback from the active telescopes. Therefore the remote control software for VLBI radio telescopes ``e-RemoteCtrl'' (http://www.econtrol-software.de), which enables remote access as extension to the NASA Field System, realizes real-time data streams to dedicated data centers. The software has direct access to the status information about the current observation (e.g., schedule, scan, source) and the telescope (e.g., current state, temperature, pressure) in real-time. This information are directly sent to ``IVS Live''. ``IVS Live'' (http://ivslive.obs.u-bordeaux1.fr/) is a Web tool that can be used to follow the observing sessions, organized by the International VLBI Service for Geodesy and Astrometry (IVS), navigate through past or upcoming sessions, or search and display specific information about sessions, sources (like VLBI images), and stations, by using an Internet browser.

Digital Image Correlation from Commercial to FOS Software: a Mature Technique for Full-Field Displacement Measurements

NASA Astrophysics Data System (ADS)

Belloni, V.; Ravanelli, R.; Nascetti, A.; Di Rita, M.; Mattei, D.; Crespi, M.

2018-05-01

In the last few decades, there has been a growing interest in studying non-contact methods for full-field displacement and strain measurement. Among such techniques, Digital Image Correlation (DIC) has received particular attention, thanks to its ability to provide these information by comparing digital images of a sample surface before and after deformation. The method is now commonly adopted in the field of civil, mechanical and aerospace engineering and different companies and some research groups implemented 2D and 3D DIC software. In this work a review on DIC software status is given at first. Moreover, a free and open source 2D DIC software is presented, named py2DIC and developed in Python at the Geodesy and Geomatics Division of DICEA of the University of Rome "La Sapienza"; its potentialities were evaluated by processing the images captured during tensile tests performed in the Structural Engineering Lab of the University of Rome "La Sapienza" and comparing them to those obtained using the commercial software Vic-2D developed by Correlated Solutions Inc, USA. The agreement of these results at one hundredth of millimetre level demonstrate the possibility to use this open source software as a valuable 2D DIC tool to measure full-field displacements on the investigated sample surface.

Evaluation of Smoking Status Identification Using Electronic Health Records and Open-Text Information in a Large Mental Health Case Register

PubMed Central

Wu, Chia-Yi; Chang, Chin-Kuo; Robson, Debbie; Jackson, Richard; Chen, Shaw-Ji; Hayes, Richard D.; Stewart, Robert

2013-01-01

Background High smoking prevalence is a major public health concern for people with mental disorders. Improved monitoring could be facilitated through electronic health record (EHR) databases. We evaluated whether EHR information held in structured fields might be usefully supplemented by open-text information. The prevalence and correlates of EHR-derived current smoking in people with severe mental illness were also investigated. Methods All cases had been referred to a secondary mental health service between 2008-2011 and received a diagnosis of schizophreniform or bipolar disorder. The study focused on those aged over 15 years who had received active care from the mental health service for at least a year (N=1,555). The ‘CRIS-IE-Smoking’ application used General Architecture for Text Engineering (GATE) natural language processing software to extract smoking status information from open-text fields. A combination of CRIS-IE-Smoking with data from structured fields was evaluated for coverage and the prevalence and demographic correlates of current smoking were analysed. Results Proportions of patients with recorded smoking status increased from 11.6% to 64.0% through supplementing structured fields with CRIS-IE-Smoking data. The prevalence of current smoking was 59.6% in these 995 cases for whom this information was available. After adjustment, younger age (below 65 years), male sex, and non-cohabiting status were associated with current smoking status. Conclusions A natural language processing application substantially improved routine EHR data on smoking status above structured fields alone and could thus be helpful in improving monitoring of this lifestyle behaviour. However, limited information on smoking status remained a challenge. PMID:24069288

A method to establish seismic noise baselines for automated station assessment

USGS Publications Warehouse

McNamara, D.E.; Hutt, C.R.; Gee, L.S.; Benz, H.M.; Buland, R.P.

2009-01-01

We present a method for quantifying station noise baselines and characterizing the spectral shape of out-of-nominal noise sources. Our intent is to automate this method in order to ensure that only the highest-quality data are used in rapid earthquake products at NEIC. In addition, the station noise baselines provide a valuable tool to support the quality control of GSN and ANSS backbone data and metadata. The procedures addressed here are currently in development at the NEIC, and work is underway to understand how quickly changes from nominal can be observed and used within the NEIC processing framework. The spectral methods and software used to compute station baselines and described herein (PQLX) can be useful to both permanent and portable seismic stations operators. Applications include: general seismic station and data quality control (QC), evaluation of instrument responses, assessment of near real-time communication system performance, characterization of site cultural noise conditions, and evaluation of sensor vault design, as well as assessment of gross network capabilities (McNamara et al. 2005). Future PQLX development plans include incorporating station baselines for automated QC methods and automating station status report generation and notification based on user-defined QC parameters. The PQLX software is available through the USGS (http://earthquake. usgs.gov/research/software/pqlx.php) and IRIS (http://www.iris.edu/software/ pqlx/).

Knowledge-Based Aircraft Automation: Managers Guide on the use of Artificial Intelligence for Aircraft Automation and Verification and Validation Approach for a Neural-Based Flight Controller

NASA Technical Reports Server (NTRS)

Broderick, Ron

1997-01-01

The ultimate goal of this report was to integrate the powerful tools of artificial intelligence into the traditional process of software development. To maintain the US aerospace competitive advantage, traditional aerospace and software engineers need to more easily incorporate the technology of artificial intelligence into the advanced aerospace systems being designed today. The future goal was to transition artificial intelligence from an emerging technology to a standard technology that is considered early in the life cycle process to develop state-of-the-art aircraft automation systems. This report addressed the future goal in two ways. First, it provided a matrix that identified typical aircraft automation applications conducive to various artificial intelligence methods. The purpose of this matrix was to provide top-level guidance to managers contemplating the possible use of artificial intelligence in the development of aircraft automation. Second, the report provided a methodology to formally evaluate neural networks as part of the traditional process of software development. The matrix was developed by organizing the discipline of artificial intelligence into the following six methods: logical, object representation-based, distributed, uncertainty management, temporal and neurocomputing. Next, a study of existing aircraft automation applications that have been conducive to artificial intelligence implementation resulted in the following five categories: pilot-vehicle interface, system status and diagnosis, situation assessment, automatic flight planning, and aircraft flight control. The resulting matrix provided management guidance to understand artificial intelligence as it applied to aircraft automation. The approach taken to develop a methodology to formally evaluate neural networks as part of the software engineering life cycle was to start with the existing software quality assurance standards and to change these standards to include neural network development. The changes were to include evaluation tools that can be applied to neural networks at each phase of the software engineering life cycle. The result was a formal evaluation approach to increase the product quality of systems that use neural networks for their implementation.

Status of the MIND simulation and analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cervera Villanueva, A.; Martin-Albo, J.; Laing, A.

2010-03-30

A realistic simulation of the Neutrino Factory detectors is required in order to fully understand the sensitivity of such a facility to the remaining parameters and degeneracies of the neutrino mixing matrix. Here described is the status of a modular software framework being developed to accommodate such a study. The results of initial studies of the reconstruction software and expected efficiency curves in the context of the golden channel are given.

[Healthcare in One's Own Home or Outside: A Comparison of the Health Status of Family Caregivers].

PubMed

Mußgnug, T; Korotkaia, A

2017-12-01

The GEDA-Survey 2012 is a representative, nationwide survey conducted by means of computer-assisted telephone interviews (CATI) between March 2012 and March 2013 by the Robert Koch Institute with 19 294 completed interviews. A total of 1 219 persons tending to the needs of a care-dependent person responded to questions about sex, age and health status. Using the statistics software "SPSS", the GEDA-data were evaluated descriptively and finally visualized with "Microsoft Office". The survey results reveal that 47,2% of family caregivers from this cohort are between 45 and 64 years old. This cohort had more female caregivers (62,8%) than males (37,2%). Comparing the frequency of information on health status in 3 age groups, our survey indicated that persons tending to an individual outside their own homes assessed their health status to be better than those caring for individuals in their own homes. © Georg Thieme Verlag KG Stuttgart · New York.

Open Source Software and the Intellectual Commons.

ERIC Educational Resources Information Center

Dorman, David

2002-01-01

Discusses the Open Source Software method of software development and its relationship to control over information content. Topics include digital library resources; reference services; preservation; the legal and economic status of information; technical standards; access to digital data; control of information use; and copyright and patent laws.…

Space shuttle configuration accounting functional design specification

NASA Technical Reports Server (NTRS)

1974-01-01

An analysis is presented of the requirements for an on-line automated system which must be capable of tracking the status of requirements and engineering changes and of providing accurate and timely records. The functional design specification provides the definition, description, and character length of the required data elements and the interrelationship of data elements to adequately track, display, and report the status of active configuration changes. As changes to the space shuttle program levels II and III configuration are proposed, evaluated, and dispositioned, it is the function of the configuration management office to maintain records regarding changes to the baseline and to track and report the status of those changes. The configuration accounting system will consist of a combination of computers, computer terminals, software, and procedures, all of which are designed to store, retrieve, display, and process information required to track proposed and proved engineering changes to maintain baseline documentation of the space shuttle program levels II and III.

Using software to predict occupational hearing loss in the mining industry.

PubMed

Azman, A S; Li, M; Thompson, J K

2016-01-01

Powerful mining systems typically generate high-level noise that can damage the hearing ability of miners. Engineering noise controls are the most desirable and effective control for overexposure to noise. However, the effects of these noise controls on the actual hearing status of workers are not easily measured. A tool that can provide guidance in assigning workers to jobs based on the noise levels to which they will be exposed is highly desirable. Therefore, the Pittsburgh Mining Research Division (PMRD) of the U.S. National Institute for Occupational Safety and Health (NIOSH) developed a tool to estimate in a systematic way the hearing loss due to occupational noise exposure and to evaluate the effectiveness of developed engineering controls. This computer program is based on the ISO 1999 standard and can be used to estimate the loss of hearing ability caused by occupational noise exposures. In this paper, the functionalities of this software are discussed and several case studies related to mining machinery are presented to demonstrate the functionalities of this software.

Structural reliability methods: Code development status

NASA Astrophysics Data System (ADS)

Millwater, Harry R.; Thacker, Ben H.; Wu, Y.-T.; Cruse, T. A.

1991-05-01

The Probabilistic Structures Analysis Method (PSAM) program integrates state of the art probabilistic algorithms with structural analysis methods in order to quantify the behavior of Space Shuttle Main Engine structures subject to uncertain loadings, boundary conditions, material parameters, and geometric conditions. An advanced, efficient probabilistic structural analysis software program, NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) was developed as a deliverable. NESSUS contains a number of integrated software components to perform probabilistic analysis of complex structures. A nonlinear finite element module NESSUS/FEM is used to model the structure and obtain structural sensitivities. Some of the capabilities of NESSUS/FEM are shown. A Fast Probability Integration module NESSUS/FPI estimates the probability given the structural sensitivities. A driver module, PFEM, couples the FEM and FPI. NESSUS, version 5.0, addresses component reliability, resistance, and risk.

Structural reliability methods: Code development status

NASA Technical Reports Server (NTRS)

Millwater, Harry R.; Thacker, Ben H.; Wu, Y.-T.; Cruse, T. A.

1991-01-01

The Probabilistic Structures Analysis Method (PSAM) program integrates state of the art probabilistic algorithms with structural analysis methods in order to quantify the behavior of Space Shuttle Main Engine structures subject to uncertain loadings, boundary conditions, material parameters, and geometric conditions. An advanced, efficient probabilistic structural analysis software program, NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) was developed as a deliverable. NESSUS contains a number of integrated software components to perform probabilistic analysis of complex structures. A nonlinear finite element module NESSUS/FEM is used to model the structure and obtain structural sensitivities. Some of the capabilities of NESSUS/FEM are shown. A Fast Probability Integration module NESSUS/FPI estimates the probability given the structural sensitivities. A driver module, PFEM, couples the FEM and FPI. NESSUS, version 5.0, addresses component reliability, resistance, and risk.

Development of the engineering design integration (EDIN) system: A computer aided design development

NASA Technical Reports Server (NTRS)

Glatt, C. R.; Hirsch, G. N.

1977-01-01

The EDIN (Engineering Design Integration) System which provides a collection of hardware and software, enabling the engineer to perform man-in-the-loop interactive evaluation of aerospace vehicle concepts, was considered. Study efforts were concentrated in the following areas: (1) integration of hardware with the Univac Exec 8 System; (2) development of interactive software for the EDIN System; (3) upgrading of the EDIN technology module library to an interactive status; (4) verification of the soundness of the developing EDIN System; (5) support of NASA in design analysis studies using the EDIN System; (6) provide training and documentation in the use of the EDIN System; and (7) provide an implementation plan for the next phase of development and recommendations for meeting long range objectives.

Progress on control experiments of flexible structures

NASA Technical Reports Server (NTRS)

Juang, Jer-Nan

1990-01-01

Progress at the NASA Langley Research Center in the area of control experiments for flexible structures is described. First the author presents the experimental results for a linear model which represents slewing maneuvers of a generic space station solar panel carried out to evaluate experimentally some control technologies. Then the status of the rotational/translational maneuvering experiment of a flexible steel panel carried by a translation cart is presented. Finally, experimental results of the NASA minimast testbed using velocity command stepper motors as reaction mass reactors are shown. All the test configurations are briefly described, including actuator and sensor, test setup, and test software. The status of some research activities oriented primarily to the experimental methods for control of flexible structures is presented.

Characterization of the faulted behavior of digital computers and fault tolerant systems

NASA Technical Reports Server (NTRS)

Bavuso, Salvatore J.; Miner, Paul S.

1989-01-01

A development status evaluation is presented for efforts conducted at NASA-Langley since 1977, toward the characterization of the latent fault in digital fault-tolerant systems. Attention is given to the practical, high speed, generalized gate-level logic system simulator developed, as well as to the validation methodology used for the simulator, on the basis of faultable software and hardware simulations employing a prototype MIL-STD-1750A processor. After validation, latency tests will be performed.

Documentation of Assessment Instrumentation--The NORC/CRESST 12th Grade Science Assessment, Item Databases, and Test Booklets. Project 2.6: Analytic Models To Monitor Status & Progress of Learning & Performance & Their Antecedents: The School Science Assessment Project.

ERIC Educational Resources Information Center

Bock, H. Darrell

The hardware and software system used to create the National Opinion Research Center/Center for Research on Evaluation, Standards, and Student Testing (NORC/CRESST) item databases and test booklets for the 12th-grade science assessment are described. A general description of the capabilities of the system is given, with some specific information…

Parallel machine architecture and compiler design facilities

NASA Technical Reports Server (NTRS)

Kuck, David J.; Yew, Pen-Chung; Padua, David; Sameh, Ahmed; Veidenbaum, Alex

1990-01-01

The objective is to provide an integrated simulation environment for studying and evaluating various issues in designing parallel systems, including machine architectures, parallelizing compiler techniques, and parallel algorithms. The status of Delta project (which objective is to provide a facility to allow rapid prototyping of parallelized compilers that can target toward different machine architectures) is summarized. Included are the surveys of the program manipulation tools developed, the environmental software supporting Delta, and the compiler research projects in which Delta has played a role.

Space station: The role of software

NASA Technical Reports Server (NTRS)

Hall, D.

1985-01-01

Software will play a critical role throughout the Space Station Program. This presentation sets the stage and prompts participant interaction at the Software Issues Forum. The presentation is structured into three major topics: (1) an overview of the concept and status of the Space Station Program; (2) several charts designed to lay out the scope and role of software; and (3) information addressing the four specific areas selected for focus at the forum, specifically: software management, the software development environment, languages, and standards. NASA's current thinking is highlighted and some of the relevant critical issues are raised.

NASA PC software evaluation project

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Kuan, Julie C.

1986-01-01

The USL NASA PC software evaluation project is intended to provide a structured framework for facilitating the development of quality NASA PC software products. The project will assist NASA PC development staff to understand the characteristics and functions of NASA PC software products. Based on the results of the project teams' evaluations and recommendations, users can judge the reliability, usability, acceptability, maintainability and customizability of all the PC software products. The objective here is to provide initial, high-level specifications and guidelines for NASA PC software evaluation. The primary tasks to be addressed in this project are as follows: to gain a strong understanding of what software evaluation entails and how to organize a structured software evaluation process; to define a structured methodology for conducting the software evaluation process; to develop a set of PC software evaluation criteria and evaluation rating scales; and to conduct PC software evaluations in accordance with the identified methodology. Communication Packages, Network System Software, Graphics Support Software, Environment Management Software, General Utilities. This report represents one of the 72 attachment reports to the University of Southwestern Louisiana's Final Report on NASA Grant NGT-19-010-900. Accordingly, appropriate care should be taken in using this report out of context of the full Final Report.

Software Quality Assurance and Verification for the MPACT Library Generation Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Yuxuan; Williams, Mark L.; Wiarda, Dorothea

This report fulfills the requirements for the Consortium for the Advanced Simulation of Light-Water Reactors (CASL) milestone L2:RTM.P14.02, “SQA and Verification for MPACT Library Generation,” by documenting the current status of the software quality, verification, and acceptance testing of nuclear data libraries for MPACT. It provides a brief overview of the library generation process, from general-purpose evaluated nuclear data files (ENDF/B) to a problem-dependent cross section library for modeling of light-water reactors (LWRs). The software quality assurance (SQA) programs associated with each of the software used to generate the nuclear data libraries are discussed; specific tests within the SCALE/AMPX andmore » VERA/XSTools repositories are described. The methods and associated tests to verify the quality of the library during the generation process are described in detail. The library generation process has been automated to a degree to (1) ensure that it can be run without user intervention and (2) to ensure that the library can be reproduced. Finally, the acceptance testing process that will be performed by representatives from the Radiation Transport Methods (RTM) Focus Area prior to the production library’s release is described in detail.« less

Space station advanced automation

NASA Technical Reports Server (NTRS)

Woods, Donald

1990-01-01

In the development of a safe, productive and maintainable space station, Automation and Robotics (A and R) has been identified as an enabling technology which will allow efficient operation at a reasonable cost. The Space Station Freedom's (SSF) systems are very complex, and interdependent. The usage of Advanced Automation (AA) will help restructure, and integrate system status so that station and ground personnel can operate more efficiently. To use AA technology for the augmentation of system management functions requires a development model which consists of well defined phases of: evaluation, development, integration, and maintenance. The evaluation phase will consider system management functions against traditional solutions, implementation techniques and requirements; the end result of this phase should be a well developed concept along with a feasibility analysis. In the development phase the AA system will be developed in accordance with a traditional Life Cycle Model (LCM) modified for Knowledge Based System (KBS) applications. A way by which both knowledge bases and reasoning techniques can be reused to control costs is explained. During the integration phase the KBS software must be integrated with conventional software, and verified and validated. The Verification and Validation (V and V) techniques applicable to these KBS are based on the ideas of consistency, minimal competency, and graph theory. The maintenance phase will be aided by having well designed and documented KBS software.

Infertile Individuals’ Marital Relationship Status, Happiness, and Mental Health: A Causal Model

PubMed Central

Ahmadi Forooshany, Seyed Habiballah; Yazdkhasti, Fariba; Safari Hajataghaie, Saiede; Nasr Esfahani, Mohammad Hossein

2014-01-01

Background This study examined the causal model of relation between marital relation- ship status, happiness, and mental health in infertile individuals. Materials and Methods In this descriptive study, 155 subjects (men: 52 and women: 78), who had been visited in one of the infertility Centers, voluntarily participated in a self-evaluation. Golombok Rust Inventory of Marital Status, Oxford Happiness Ques- tionnaire, and General Health Questionnaire were used as instruments of the study. Data was analyzed by SPSS17 and Amos 5 software using descriptive statistics, independent sample t test, and path analysis. Results Disregarding the gender factor, marital relationship status was directly related to happiness (p<0.05) and happiness was directly related to mental health, (p<0.05). Also, indirect relation between marital relationship status and mental health was significant (p<0.05). These results were confirmed in women participants but in men participants only the direct relation between happiness and mental health was significant (p<0.05). Conclusion Based on goodness of model fit in fitness indexes, happiness had a mediator role in relation between marital relationship status and mental health in infertile individu- als disregarding the gender factor. Also, considering the gender factor, only in infertile women, marital relationship status can directly and indirectly affect happiness and mental health. PMID:25379161

MILCOM '85 - Military Communications Conference, Boston, MA, October 20-23, 1985, Conference Record. Volumes 1, 2, & 3

NASA Astrophysics Data System (ADS)

The present conference on the development status of communications systems in the context of electronic warfare gives attention to topics in spread spectrum code acquisition, digital speech technology, fiber-optics communications, free space optical communications, the networking of HF systems, and applications and evaluation methods for digital speech. Also treated are issues in local area network system design, coding techniques and applications, technology applications for HF systems, receiver technologies, software development status, channel simultion/prediction methods, C3 networking spread spectrum networks, the improvement of communication efficiency and reliability through technical control methods, mobile radio systems, and adaptive antenna arrays. Finally, communications system cost analyses, spread spectrum performance, voice and image coding, switched networks, and microwave GaAs ICs, are considered.

[Features of adaptive responses in right-handers and left-handers, and their relationship to the functional activity of the brain].

PubMed

Barkar, A A; Markina, L D

2014-01-01

In the article there is considered the relationship between adaptation state of the organism and features of bioelectric activity of the brain in right-handers and left-handers. Practically healthy persons of both genders, 23-45 years of age, with the chronic stress disorder were examined. Adaptation status was evaluated with a computer software "Anti-stress", features of bioelectric brain activity were detected by means of spectral and coherent EEG analysis, also the character of motor and sensory asymmetries was determined. The obtained data showed that the response of the organism to excitators of varying strength is a system one and manifested at different levels; adaptation status and bioelectrical activity in right-handers and left-handers have features.

STARS 2.0: 2nd-generation open-source archiving and query software

NASA Astrophysics Data System (ADS)

Winegar, Tom

2008-07-01

The Subaru Telescope is in process of developing an open-source alternative to the 1st-generation software and databases (STARS 1) used for archiving and query. For STARS 2, we have chosen PHP and Python for scripting and MySQL as the database software. We have collected feedback from staff and observers, and used this feedback to significantly improve the design and functionality of our future archiving and query software. Archiving - We identified two weaknesses in 1st-generation STARS archiving software: a complex and inflexible table structure and uncoordinated system administration for our business model: taking pictures from the summit and archiving them in both Hawaii and Japan. We adopted a simplified and normalized table structure with passive keyword collection, and we are designing an archive-to-archive file transfer system that automatically reports real-time status and error conditions and permits error recovery. Query - We identified several weaknesses in 1st-generation STARS query software: inflexible query tools, poor sharing of calibration data, and no automatic file transfer mechanisms to observers. We are developing improved query tools and sharing of calibration data, and multi-protocol unassisted file transfer mechanisms for observers. In the process, we have redefined a 'query': from an invisible search result that can only transfer once in-house right now, with little status and error reporting and no error recovery - to a stored search result that can be monitored, transferred to different locations with multiple protocols, reporting status and error conditions and permitting recovery from errors.

Association of blood antioxidants status with visual and auditory sustained attention.

PubMed

Shiraseb, Farideh; Siassi, Fereydoun; Sotoudeh, Gity; Qorbani, Mostafa; Rostami, Reza; Sadeghi-Firoozabadi, Vahid; Narmaki, Elham

2015-01-01

A low antioxidants status has been shown to result in oxidative stress and cognitive impairment. Because antioxidants can protect the nervous system, it is expected that a better blood antioxidant status might be related to sustained attention. However, the relationship between the blood antioxidant status and visual and auditory sustained attention has not been investigated. The aim of this study was to evaluate the association of fruits and vegetables intake and the blood antioxidant status with visual and auditory sustained attention in women. This cross-sectional study was performed on 400 healthy women (20-50 years) who attended the sports clubs of Tehran Municipality. Sustained attention was evaluated based on the Integrated Visual and Auditory Continuous Performance Test using the Integrated Visual and Auditory (IVA) software. The 24-hour food recall questionnaire was used for estimating fruits and vegetables intake. Serum total antioxidant capacity (TAC), and erythrocyte superoxide dismutase (SOD) and glutathione peroxidase (GPx) activities were measured in 90 participants. After adjusting for energy intake, age, body mass index (BMI), years of education and physical activity, higher reported fruits, and vegetables intake was associated with better visual and auditory sustained attention (P < 0.001). A high intake of some subgroups of fruits and vegetables (i.e. berries, cruciferous vegetables, green leafy vegetables, and other vegetables) was also associated with better sustained attention (P < 0.02). Serum TAC, and erythrocyte SOD and GPx activities increased with the increase in the tertiles of visual and auditory sustained attention after adjusting for age, years of education, physical activity, energy, BMI, and caffeine intake (P < 0.05). Improved visual and auditory sustained attention is associated with a better blood antioxidant status. Therefore, improvement of the antioxidant status through an appropriate dietary intake can possibly enhance sustained attention.

Application of fecal near-infrared spectroscopy and nutritional balance software to monitor diet quality and body condition in beef cows grazing Arizona rangeland.

PubMed

Tolleson, D R; Schafer, D W

2014-01-01

Monitoring the nutritional status of range cows is difficult. Near-infrared spectroscopy (NIRS) of feces has been used to predict diet quality in cattle. When fecal NIRS is coupled with decision support software such as the Nutritional Balance Analyzer (NUTBAL PRO), nutritional status and animal performance can be monitored. Approximately 120 Hereford and 90 CGC composite (50% Red Angus, 25% Tarentaise, and 25% Charolais) cows grazing in a single herd were used in a study to determine the ability of fecal NIRS and NutbalPro to project BCS (1 = thin and 9 = fat) under commercial scale rangeland conditions in central Arizona. Cattle were rotated across the 31,000 ha allotment at 10 to 20 d intervals. Cattle BCS and fecal samples (approximately 500 g) composited from 5 to 10 cows were collected in the pasture approximately monthly at the midpoint of each grazing period. Samples were frozen and later analyzed by NIRS for prediction of diet crude protein (CP) and digestible organic matter (DOM). Along with fecal NIRS predicted diet quality, animal breed type, reproductive status, and environmental conditions were input to the software for each fecal sampling and BCS date. Three different evaluations were performed. First, fecal NIRS and NutbalPro derived BCS was projected forward from each sampling as if it were a "one-time only" measurement. Second, BCS was derived from the average predicted weight change between 2 sampling dates for a given period. Third, inputs to the model were adjusted to better represent local animals and conditions. Fecal NIRS predicted diet quality varied from a minimum of approximately 5% CP and 57% DOM in winter to a maximum of approximately 11% CP and 60% DOM in summer. Diet quality correlated with observed seasonal changes and precipitation events. In evaluation 1, differences in observed versus projected BCS were not different (P > 0.1) between breed types but these values ranged from 0.1 to 1.1 BCS in Herefords and 0.0 to 0.9 in CGC. In evaluation 2, differences in observed versus projected BCS were not different (P > 0.1) between breed types but these values ranged from 0.00 to 0.46 in Hereford and 0.00 to 0.67 in CGC. In evaluation 3, the range of differences between observed and projected BCS was 0.04 to 0.28. The greatest difference in projected versus observed BCS occurred during periods of lowest diet quality. Body condition was predicted accurately enough to be useful in monitoring the nutrition of range beef cows under the conditions of this study.

Driver education program status report : software system.

DOT National Transportation Integrated Search

1981-01-01

In April of 1980, a joint decision between Research Council personnel and representatives of the Department of Education was reached, and a project was undertaken by the Research Council to provide a software system to process the annual Driver Educa...

Second Annual Conference on Astronomical Data Analysis Software and Systems. Abstracts

NASA Technical Reports Server (NTRS)

1992-01-01

Abstracts from the conference are presented. The topics covered include the following: next generation software systems and languages; databases, catalogs, and archives; user interfaces/visualization; real-time data acquisition/scheduling; and IRAF/STSDAS/PROS status reports.

LCG Persistency Framework (CORAL, COOL, POOL): Status and Outlook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valassi, A.; /CERN; Clemencic, M.

2012-04-19

The Persistency Framework consists of three software packages (CORAL, COOL and POOL) addressing the data access requirements of the LHC experiments in different areas. It is the result of the collaboration between the CERN IT Department and the three experiments (ATLAS, CMS and LHCb) that use this software to access their data. POOL is a hybrid technology store for C++ objects, metadata catalogs and collections. CORAL is a relational database abstraction layer with an SQL-free API. COOL provides specific software tools and components for the handling of conditions data. This paper reports on the status and outlook of the projectmore » and reviews in detail the usage of each package in the three experiments.« less

Development of a support software system for real-time HAL/S applications

NASA Technical Reports Server (NTRS)

Smith, R. S.

1984-01-01

Methodologies employed in defining and implementing a software support system for the HAL/S computer language for real-time operations on the Shuttle are detailed. Attention is also given to the management and validation techniques used during software development and software maintenance. Utilities developed to support the real-time operating conditions are described. With the support system being produced on Cyber computers and executable code then processed through Cyber or PDP machines, the support system has a production level status and can serve as a model for other software development projects.

Classification software technique assessment

NASA Technical Reports Server (NTRS)

Jayroe, R. R., Jr.; Atkinson, R.; Dasarathy, B. V.; Lybanon, M.; Ramapryian, H. K.

1976-01-01

A catalog of software options is presented for the use of local user communities to obtain software for analyzing remotely sensed multispectral imagery. The resources required to utilize a particular software program are described. Descriptions of how a particular program analyzes data and the performance of that program for an application and data set provided by the user are shown. An effort is made to establish a statistical performance base for various software programs with regard to different data sets and analysis applications, to determine the status of the state-of-the-art.

Software development environments: Present and future, appendix D

NASA Technical Reports Server (NTRS)

Riddle, W. E.

1980-01-01

Computerized environments which facilitate the development of appropriately functioning software systems are discussed. Their current status is reviewed and several trends exhibited by their history are identified. A number of principles, some at (slight) variance with the historical trends, are suggested and it is argued that observance of these principles is critical to achieving truly effective and efficient software development support environments.

ISWHM: Tools and Techniques for Software and System Health Management

NASA Technical Reports Server (NTRS)

Schumann, Johann; Mengshoel, Ole J.; Darwiche, Adnan

2010-01-01

This presentation presents status and results of research on Software Health Management done within the NRA "ISWHM: Tools and Techniques for Software and System Health Management." Topics include: Ingredients of a Guidance, Navigation, and Control System (GN and C); Selected GN and C Testbed example; Health Management of major ingredients; ISWHM testbed architecture; and Conclusions and next Steps.

Periapical and endodontic status scale based on periapical bone lesions and endodontic treatment quality evaluation using cone-beam computed tomography.

PubMed

Venskutonis, Tadas; Plotino, Gianluca; Tocci, Luigi; Gambarini, Gianluca; Maminskas, Julius; Juodzbalys, Gintaras

2015-02-01

The purpose of this study was to present a new periapical and endodontic status scale (PESS) that is based on the complex periapical index (COPI), which was designed for the identification and classification of periapical bone lesions in cases of apical periodontitis, and the endodontically treated tooth index, which was designed for endodontic treatment quality evaluation by means of cone-beam computed tomographic (CBCT) analysis. Periapical and endodontic status parameters were selected from the already known indexes and scientific literature for radiologic evaluation. Radiographic images (CBCT imaging, digital orthopantomography [DOR], and digital periapical radiography) from 55 patients were analyzed. All parameters were evaluated on CBCT, DOR, and digital periapical radiographic images by 2 external observers. The statistical analysis was performed with software SPSS version 19.0 (SPSS Inc, Chicago, IL). Chi-square tests were used to compare frequencies of qualitative variables. The level of significance was set at P ≤ .05. Overall intraobserver and interobserver agreements were very good and good, respectively. CBCT analysis found more lesions and lesions of bigger dimension (P < .001). CBCT imaging was also superior in locating lesions in the apical part on the side compared with DOR and in the diagnosis of cortical bone destruction compared with both methods (P < .001). Through CBCT analysis, more root canals and more canals associated with lesions were found. The most informative and reproducible periapical and endodontic status parameters were selected, and a new PESS was proposed. The classification proposed in the present study seems to be reproducible and objective and adds helpful information with respect to the existing indexes. Future studies need to be conducted to validate PESS. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

A database for TMT interface control documents

NASA Astrophysics Data System (ADS)

Gillies, Kim; Roberts, Scott; Brighton, Allan; Rogers, John

2016-08-01

The TMT Software System consists of software components that interact with one another through a software infrastructure called TMT Common Software (CSW). CSW consists of software services and library code that is used by developers to create the subsystems and components that participate in the software system. CSW also defines the types of components that can be constructed and their roles. The use of common component types and shared middleware services allows standardized software interfaces for the components. A software system called the TMT Interface Database System was constructed to support the documentation of the interfaces for components based on CSW. The programmer describes a subsystem and each of its components using JSON-style text files. A command interface file describes each command a component can receive and any commands a component sends. The event interface files describe status, alarms, and events a component publishes and status and events subscribed to by a component. A web application was created to provide a user interface for the required features. Files are ingested into the software system's database. The user interface allows browsing subsystem interfaces, publishing versions of subsystem interfaces, and constructing and publishing interface control documents that consist of the intersection of two subsystem interfaces. All published subsystem interfaces and interface control documents are versioned for configuration control and follow the standard TMT change control processes. Subsystem interfaces and interface control documents can be visualized in the browser or exported as PDF files.

Using software to predict occupational hearing loss in the mining industry

PubMed Central

Azman, A.S.; Li, M.; Thompson, J.K.

2017-01-01

Powerful mining systems typically generate high-level noise that can damage the hearing ability of miners. Engineering noise controls are the most desirable and effective control for overexposure to noise. However, the effects of these noise controls on the actual hearing status of workers are not easily measured. A tool that can provide guidance in assigning workers to jobs based on the noise levels to which they will be exposed is highly desirable. Therefore, the Pittsburgh Mining Research Division (PMRD) of the U.S. National Institute for Occupational Safety and Health (NIOSH) developed a tool to estimate in a systematic way the hearing loss due to occupational noise exposure and to evaluate the effectiveness of developed engineering controls. This computer program is based on the ISO 1999 standard and can be used to estimate the loss of hearing ability caused by occupational noise exposures. In this paper, the functionalities of this software are discussed and several case studies related to mining machinery are presented to demonstrate the functionalities of this software. PMID:28596700

The eating and physical activity habits of inner-city adolescents.

PubMed

Sweeney, Nancy M; Glaser, Dale; Tedeschi, Christine

2007-01-01

The purposes of this study were to (a) analyze the body mass index (BMI) percentile and eating and physical activity habits of adolescents, viewing them by sex, ethnicity, household type, and foreign-born or born in the United States, and (b) evaluate diet and activity analysis software for use by practitioners and adolescent clients. A descriptive-correlational study of 74 adolescents from low-income households completed a 24-hour recall of their foods, drinks, and activities, which were analyzed using MyPyramidTracker software. Data were analyzed using parametric and nonparametric methods to test associations and conduct between-group comparisons. Girls, Hispanics, adolescents living with single-parent mothers, and those who were foreign born had the highest mean BMI percentiles and the least healthy eating and physical activity habits. BMI percentile fell as daily calorie expenditure rose. MyPyramidTracker software is suitable for use by adolescents and their family members. To contribute to the reversal of national trends of increasing overweight status among adolescents, practitioners can focus their teaching, counseling, and advocacy on adolescents in these groups.

An evaluation of dental prosthetic status and prosthetic needs among eunuchs (trans genders) residing in bhopal city, madhya pradesh, India: a cross-sectional study.

PubMed

Hongal, S; Torwane, Na; Chandrashekhar, Br; Saxena, V; Chavan, Kr

2014-11-01

Eunuchs are considered as the most vulnerable, frustrated, and insecure community. The accessibility to medical and dental facilities for the eunuchs is nearly nonexistent. Due to these reasons, they might be at a high risk of developing severe dental problems like tooth loss. The present cross-sectional study aimed to evaluate the dental prosthetic status and prosthetic needs among eunuchs residing in Bhopal city, Madhya Pradesh, India. On the basis of convenient nonprobability snowball sampling technique, all the self-identified eunuchs residing in the city of Bhopal along with a matched control consisting of cross section of the general population residing in the same locality was examined to evaluate the prosthetic status and prosthetic needs of the population. All the obtained data were entered into a personal computer on Microsoft excel sheet and analyzed using the software; Statistical Package for Social Science version 20. Data comparison was done by applying Chi-square test. A total of 639 subjects comprised of 207 eunuchs, 218 males and 214 females. Among all participants, 2.8% (18/639) were having prosthesis. The overall prosthetic status among males was 3.2% (7/218) followed by 2.9% (6/207) eunuchs and 2.3% (5/214) females. However, need for multi-unit and combination of one and more unit prosthesis for upper and lower jaws was higher in males compared to females and eunuchs, but the difference was not statistically significant. The findings of this study clearly demonstrate a high unmet need for prosthetic care among the population surveyed.

ACRF Ingest Software Status: New, Current, and Future - April 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

AS Koontz; S Choudhury; BD Ermold

2008-04-01

The purpose of this report is to provide status of the ingest software used to process instrument data for the Atmospheric Radiation Measurement Program Climate Research Facility (ACRF). The report is divided into 4 sections: (1) for news about ingests currently under development, (2) for current production ingests, (3) for future ingest development plans, and (4) for information on retired ingests. Please note that datastreams beginning in “xxx” indicate cases where ingests run at multiple ACRF sites, which results in a datastream(s) for each location.

ACRF Ingest Software Status: New, Current, and Future (September 2007)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koontz, AS; Choudhury, S; Ermold, BD

2007-04-01

The purpose of this report is to provide status of the ingest software used to process instrument data for the Atmospheric Radiation Measurement Program Climate Research Facility (ACRF). The report is divided into 4 sections: (1) for news about ingests currently under development, (2) for current production ingests, (3) for future ingest development plans, and (4) for information on retired ingests. Please note that datastreams beginning in “xxx” indicate cases where ingests run at multiple ACRF sites, which results in a datastream(s) for each location.

ACRF Ingest Software Status: New, Current, and Future - May 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

AS Koontz; S Choudhury; BD Ermold

2008-05-01

The purpose of this report is to provide status of the ingest software used to process instrument data for the Atmospheric Radiation Measurement Program Climate Research Facility (ACRF). The report is divided into 4 sections: (1) for news about ingests currently under development, (2) for current production ingests, (3) for future ingest development plans, and (4) for information on retired ingests. Please note that datastreams beginning in “xxx” indicate cases where ingests run at multiple ACRF sites, which results in a datastream(s) for each location.

Top Down Implementation Plan for system performance test software

NASA Technical Reports Server (NTRS)

Jacobson, G. N.; Spinak, A.

1982-01-01

The top down implementation plan used for the development of system performance test software during the Mark IV-A era is described. The plan is based upon the identification of the hierarchical relationship of the individual elements of the software design, the development of a sequence of functionally oriented demonstrable steps, the allocation of subroutines to the specific step where they are first required, and objective status reporting. The results are: determination of milestones, improved managerial visibility, better project control, and a successful software development.

17 CFR 37.202 - Access requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... software vendor with impartial access to its market(s) and market services, including any indicative quote... electronic confirmation of their status as eligible contract participants, as defined by the Act and... participants and independent software vendors receiving comparable access to, or services from, the swap...

Multimedia Software Evaluation Form for Teachers

ERIC Educational Resources Information Center

Herring, Donna F.; Notar, Charles E.; Wilson, Janell D.

2005-01-01

Schools are currently receiving increased funds for multimedia software for classrooms. There is a need for good software in the schools, and there is a need to know how to evaluate software and not naively rely on advertisements. Evaluators of multimedia software for education must have the skills to critically evaluate and make decisions not…

Commercialization of NESSUS: Status

NASA Technical Reports Server (NTRS)

Thacker, Ben H.; Millwater, Harry R.

1991-01-01

A plan was initiated in 1988 to commercialize the Numerical Evaluation of Stochastic Structures Under Stress (NESSUS) probabilistic structural analysis software. The goal of the on-going commercialization effort is to begin the transfer of Probabilistic Structural Analysis Method (PSAM) developed technology into industry and to develop additional funding resources in the general area of structural reliability. The commercialization effort is summarized. The SwRI NESSUS Software System is a general purpose probabilistic finite element computer program using state of the art methods for predicting stochastic structural response due to random loads, material properties, part geometry, and boundary conditions. NESSUS can be used to assess structural reliability, to compute probability of failure, to rank the input random variables by importance, and to provide a more cost effective design than traditional methods. The goal is to develop a general probabilistic structural analysis methodology to assist in the certification of critical components in the next generation Space Shuttle Main Engine.

The Software Line-up: What Reviewers Look for When Evaluating Software.

ERIC Educational Resources Information Center

ELECTRONIC Learning, 1982

1982-01-01

Contains a check list to aid teachers in evaluating software used in computer-assisted instruction on microcomputers. The evaluation form contains three sections: program description, program evaluation, and overall evaluation. A brief description of a software evaluation program in use at the Granite School District in Utah is included. (JJD)

The ILLIAC IV memory system: Current status and future possibilities

NASA Technical Reports Server (NTRS)

Stevenson, D. K.

1978-01-01

The future needs of researchers who will use the Illiac were examined and the requirements they will place on the memory system were evaluated. Various alternatives to replacing critical memory components were considered with regard to cost, risk, system impact, software requirements, and implementation schedules. The current system, its performance and status, and the limitations it places on possible enhancements are discussed as well as the planned enhancements to the Illiac processor. After a brief technology survey, different implementations are presented for each system memory component. Three different memory systems are proposed to meet the identified needs of the Illiac user community. These three alternatives differ considerably with respect to storage capacity and accessing capabilities, but they all offer significant improvements over the current system. The proposed systems and their relative merits are analyzed.

Cargo Movement Operations System (CMOS). Software Requirements Specification

DTIC Science & Technology

1990-03-12

was erroneously deleted. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN...previous SRS. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED...ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] 0 ORIGINATOR CONTROL NUMBER

Team Software Development for Aerothermodynamic and Aerodynamic Analysis and Design

NASA Technical Reports Server (NTRS)

Alexandrov, N.; Atkins, H. L.; Bibb, K. L.; Biedron, R. T.; Carpenter, M. H.; Gnoffo, P. A.; Hammond, D. P.; Jones, W. T.; Kleb, W. L.; Lee-Rausch, E. M.

2003-01-01

A collaborative approach to software development is described. The approach employs the agile development techniques: project retrospectives, Scrum status meetings, and elements of Extreme Programming to efficiently develop a cohesive and extensible software suite. The software product under development is a fluid dynamics simulator for performing aerodynamic and aerothermodynamic analysis and design. The functionality of the software product is achieved both through the merging, with substantial rewrite, of separate legacy codes and the authorship of new routines. Examples of rapid implementation of new functionality demonstrate the benefits obtained with this agile software development process. The appendix contains a discussion of coding issues encountered while porting legacy Fortran 77 code to Fortran 95, software design principles, and a Fortran 95 coding standard.

Lexical diversity and omission errors as predictors of language ability in the narratives of sequential Spanish-English bilinguals: a cross-language comparison.

PubMed

Jacobson, Peggy F; Walden, Patrick R

2013-08-01

This study explored the utility of language sample analysis for evaluating language ability in school-age Spanish-English sequential bilingual children. Specifically, the relative potential of lexical diversity and word/morpheme omission as predictors of typical or atypical language status was evaluated. Narrative samples were obtained from 48 bilingual children in both of their languages using the suggested narrative retell protocol and coding conventions as per Systematic Analysis of Language Transcripts (SALT; Miller & Iglesias, 2008) software. An additional lexical diversity measure, VocD, was also calculated. A series of logistical hierarchical regressions explored the utility of the number of different words, VocD statistic, and word and morpheme omissions in each language for predicting language status. Omission errors turned out to be the best predictors of bilingual language impairment at all ages, and this held true across languages. Although lexical diversity measures did not predict typical or atypical language status, the measures were significantly related to oral language proficiency in English and Spanish. The results underscore the significance of omission errors in bilingual language impairment while simultaneously revealing the limitations of lexical diversity measures as indicators of impairment. The relationship between lexical diversity and oral language proficiency highlights the importance of considering relative language proficiency in bilingual assessment.

Software development environments: Status and trends

NASA Technical Reports Server (NTRS)

Duffel, Larry E.

1988-01-01

Currently software engineers are the essential integrating factors tying several components together. The components consist of process, methods, computers, tools, support environments, and software engineers. The engineers today empower the tools versus the tools empowering the engineers. Some of the issues in software engineering are quality, managing the software engineering process, and productivity. A strategy to accomplish this is to promote the evolution of software engineering from an ad hoc, labor intensive activity to a managed, technology supported discipline. This strategy may be implemented by putting the process under management control, adopting appropriate methods, inserting the technology that provides automated support for the process and methods, collecting automated tools into an integrated environment and educating the personnel.

Validation of a new classifier for the automated analysis of the human epidermal growth factor receptor 2 (HER2) gene amplification in breast cancer specimens

PubMed Central

2013-01-01

Amplification of the human epidermal growth factor receptor 2 (HER2) is a prognostic marker for poor clinical outcome and a predictive marker for therapeutic response to targeted therapies in breast cancer patients. With the introduction of anti-HER2 therapies, accurate assessment of HER2 status has become essential. Fluorescence in situ hybridization (FISH) is a widely used technique for the determination of HER2 status in breast cancer. However, the manual signal enumeration is time-consuming. Therefore, several companies like MetaSystem have developed automated image analysis software. Some of these signal enumeration software employ the so called “tile-sampling classifier”, a programming algorithm through which the software quantifies fluorescent signals in images on the basis of square tiles of fixed dimensions. Considering that the size of tile does not always correspond to the size of a single tumor cell nucleus, some users argue that this analysis method might not completely reflect the biology of cells. For that reason, MetaSystems has developed a new classifier which is able to recognize nuclei within tissue sections in order to determine the HER2 amplification status on nuclei basis. We call this new programming algorithm “nuclei-sampling classifier”. In this study, we evaluated the accuracy of the “nuclei-sampling classifier” in determining HER2 gene amplification by FISH in nuclei of breast cancer cells. To this aim, we randomly selected from our cohort 64 breast cancer specimens (32 nonamplified and 32 amplified) and we compared results obtained through manual scoring and through this new classifier. The new classifier automatically recognized individual nuclei. The automated analysis was followed by an optional human correction, during which the user interacted with the software in order to improve the selection of cell nuclei automatically selected. Overall concordance between manual scoring and automated nuclei-sampling analysis was 98.4% (100% for nonamplified cases and 96.9% for amplified cases). However, after human correction, concordance between the two methods was 100%. We conclude that the nuclei-based classifier is a new available tool for automated quantitative HER2 FISH signals analysis in nuclei in breast cancer specimen and it can be used for clinical purposes. PMID:23379971

A text input system developed by using lips image recognition based LabVIEW for the seriously disabled.

PubMed

Chen, S C; Shao, C L; Liang, C K; Lin, S W; Huang, T H; Hsieh, M C; Yang, C H; Luo, C H; Wuo, C M

2004-01-01

In this paper, we present a text input system for the seriously disabled by using lips image recognition based on LabVIEW. This system can be divided into the software subsystem and the hardware subsystem. In the software subsystem, we adopted the technique of image processing to recognize the status of mouth-opened or mouth-closed depending the relative distance between the upper lip and the lower lip. In the hardware subsystem, parallel port built in PC is used to transmit the recognized result of mouth status to the Morse-code text input system. Integrating the software subsystem with the hardware subsystem, we implement a text input system by using lips image recognition programmed in LabVIEW language. We hope the system can help the seriously disabled to communicate with normal people more easily.

Microcomputer & Software Use in Michigan's Vocational-Technical Facilities: A Status Report.

ERIC Educational Resources Information Center

Harris, Richard

This report is intended to help Michigan's vocational and technical teachers and administrators make decisions regarding the purchase of microcomputer hardware and software for professional use. Addressed in a discussion of computer hardware are current and planned inventories of microcomputer hardware located in the public vocational and…

Software development environment, appendix F

NASA Technical Reports Server (NTRS)

Riddle, W. E.

1980-01-01

The current status in the area of software development environments is assessed. The purposes of environments, the types of environments, the constituents of an environment, the issue of environment integration, and the problems which must be solved in preparing an environment are discussed. Some general maxims to guide near-term future work are proposed.

Relationship between oral health, nutrient intake and nutritional status in a sample of Brazilian elderly people.

PubMed

de Andrade, Fabiola Bof; de França Caldas, Arnaldo; Kitoko, Pedro Makumbundu

2009-03-01

To evaluate the relationship between the oral health condition, the nutrient intake and the body mass index (BMI) in elderly people. Impaired dentition has been associated with an inadequate consumption of key nutrients and with changes in nutritional status in elderly people. The sample comprised 887 elderly people, aged 60 and over, of whom 816 underwent a clinical oral examination and were allocated into groups according to the numbers of teeth and number of posterior occluding pairs of natural teeth. Nutritional status was determined using the BMI. Dietary intake was assessed by a 24-h diet recall interview and the data from these records were converted to nutritional intake using DietPro software. Differences between means were evaluated using ANOVA, together with the Tukey test or Dunnet test, according to the normality of the data. Associations between categorical variables were tested using chi-square analysis. Ages ranged from 60 to 96 years (mean, 71.46 years), with 47% of the respondents in the 60-to 69-year-old group. A high DMFT index (mean, 27.81) was observed with the missing component accounting for 88.8% of the index. Significant differences were observed between the mean intake of nutrients and the number of posterior occluding pairs of natural teeth (p < 0.05). No significant differences were found between the number of teeth and BMI. Nutrient intake is associated with the oral health status as defined by clinical measures.

Collaborative Software Development in Support of Fast Adaptive AeroSpace Tools (FAAST)

NASA Technical Reports Server (NTRS)

Kleb, William L.; Nielsen, Eric J.; Gnoffo, Peter A.; Park, Michael A.; Wood, William A.

2003-01-01

A collaborative software development approach is described. The software product is an adaptation of proven computational capabilities combined with new capabilities to form the Agency's next generation aerothermodynamic and aerodynamic analysis and design tools. To efficiently produce a cohesive, robust, and extensible software suite, the approach uses agile software development techniques; specifically, project retrospectives, the Scrum status meeting format, and a subset of Extreme Programming's coding practices are employed. Examples are provided which demonstrate the substantial benefits derived from employing these practices. Also included is a discussion of issues encountered when porting legacy Fortran 77 code to Fortran 95 and a Fortran 95 coding standard.

Self-assembled software and method of overriding software execution

DOEpatents

Bouchard, Ann M.; Osbourn, Gordon C.

2013-01-08

A computer-implemented software self-assembled system and method for providing an external override and monitoring capability to dynamically self-assembling software containing machines that self-assemble execution sequences and data structures. The method provides an external override machine that can be introduced into a system of self-assembling machines while the machines are executing such that the functionality of the executing software can be changed or paused without stopping the code execution and modifying the existing code. Additionally, a monitoring machine can be introduced without stopping code execution that can monitor specified code execution functions by designated machines and communicate the status to an output device.

Role of Text Message Reminder on Oral Hygiene Maintenance of Orthodontic Patients.

PubMed

Kumar, G Sujay; Kashyap, Arpita; Raghav, Shweta; Bhardwaj, Rishibha; Singh, Arunesh; Guram, Guneet

2018-01-01

Fixed orthodontic treatment is frequently associated with increased plaque accumulation leading to gingivitis and white spot lesions (WSLs). This study evaluated the role of text message reminder on oral hygiene of orthodontic patients. A total of 60 patients under fixed orthodontic treatment were randomly divided into two equal groups as control group and study (text message) group. Text message group received reminders about oral hygiene, while the control group did not receive any messages. Oral hygiene of both the groups was evaluated at baseline, 2, and 3 months using plaque indices (PIs) along with WSL status. Data were statistically analyzed using Statistical Package for the Social Sciences (SPSS) statistical software, version 19, with chi-square test and t-test. At the baseline, plaque score was higher in the study group over control group (p > 0.038), whereas it was decreased after 3 months in the test group (p > 0.001). For WSL, there was no significant difference at baseline, but it was significantly lower in study group (p > 0.003). Oral hygiene status improved with text message reminder.

Cargo Movement Operations System (CMOS) Preliminary Software Test Description, Increment II

DTIC Science & Technology

1991-06-26

occurred within this shall statement. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS...COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED ( ] ORIGINATOR CONTROL NUMBER: STD1-0004 PROGRAM OFFICE CONTROL NUMBER...ERCI ACCEPTS COMMENT: YES [ ] NO ( ] COMMENT DISPOSITION: COMMENT STATUS: OPEN ( ] CLOSED [ ] SYSTEM ENVIRONMENT STD The following comment is related

Cargo Movement Operations System (CMOS). Software User’s Manual

DTIC Science & Technology

1990-06-27

RATIONALE: N/A CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: ACCEPT [ ] REJECT [ ] COMMENT STATUS...NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ 3 ORIGINATOR CONTROL NUMBER: SUM-0003 PROGRAM...3.1.11. RATIONALE: Clarity. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN

A Probabilistic Software System Attribute Acceptance Paradigm for COTS Software Evaluation

NASA Technical Reports Server (NTRS)

Morris, A. Terry

2005-01-01

Standard software requirement formats are written from top-down perspectives only, that is, from an ideal notion of a client s needs. Despite the exactness of the standard format, software and system errors in designed systems have abounded. Bad and inadequate requirements have resulted in cost overruns, schedule slips and lost profitability. Commercial off-the-shelf (COTS) software components are even more troublesome than designed systems because they are often provided as is and subsequently delivered with unsubstantiated validation of described capabilities. For COTS software, there needs to be a way to express the client s software needs in a consistent and formal manner using software system attributes derived from software quality standards. Additionally, the format needs to be amenable to software evaluation processes that integrate observable evidence garnered from historical data. This paper presents a paradigm that effectively bridges the gap between what a client desires (top-down) and what has been demonstrated (bottom-up) for COTS software evaluation. The paradigm addresses the specification of needs before the software evaluation is performed and can be used to increase the shared understanding between clients and software evaluators about what is required and what is technically possible.

Design of an AdvancedTCA board management controller (IPMC)

NASA Astrophysics Data System (ADS)

Mendez, J.; Bobillier, V.; Haas, S.; Joos, M.; Mico, S.; Vasey, F.

2017-03-01

The AdvancedTCA (ATCA) standard has been selected as the hardware platform for the upgrade of the back-end electronics of the CMS and ATLAS experiments of the Large Hadron Collider (LHC) . In this context, the electronic systems for experiments group at CERN is running a project to evaluate, specify, design and support xTCA equipment. As part of this project, an Intelligent Platform Management Controller (IPMC) for ATCA blades, based on a commercial solution, has been designed to be used on existing and future ATCA blades. This paper reports on the status of this project presenting the hardware and software developments.

Software Quality Evaluation Models Applicable in Health Information and Communications Technologies. A Review of the Literature.

PubMed

Villamor Ordozgoiti, Alberto; Delgado Hito, Pilar; Guix Comellas, Eva María; Fernandez Sanchez, Carlos Manuel; Garcia Hernandez, Milagros; Lluch Canut, Teresa

2016-01-01

Information and Communications Technologies in healthcare has increased the need to consider quality criteria through standardised processes. The aim of this study was to analyse the software quality evaluation models applicable to healthcare from the perspective of ICT-purchasers. Through a systematic literature review with the keywords software, product, quality, evaluation and health, we selected and analysed 20 original research papers published from 2005-2016 in health science and technology databases. The results showed four main topics: non-ISO models, software quality evaluation models based on ISO/IEC standards, studies analysing software quality evaluation models, and studies analysing ISO standards for software quality evaluation. The models provide cost-efficiency criteria for specific software, and improve use outcomes. The ISO/IEC25000 standard is shown as the most suitable for evaluating the quality of ICTs for healthcare use from the perspective of institutional acquisition.

Presenting an Evaluation Model for the Cancer Registry Software.

PubMed

Moghaddasi, Hamid; Asadi, Farkhondeh; Rabiei, Reza; Rahimi, Farough; Shahbodaghi, Reihaneh

2017-12-01

As cancer is increasingly growing, cancer registry is of great importance as the main core of cancer control programs, and many different software has been designed for this purpose. Therefore, establishing a comprehensive evaluation model is essential to evaluate and compare a wide range of such software. In this study, the criteria of the cancer registry software have been determined by studying the documents and two functional software of this field. The evaluation tool was a checklist and in order to validate the model, this checklist was presented to experts in the form of a questionnaire. To analyze the results of validation, an agreed coefficient of %75 was determined in order to apply changes. Finally, when the model was approved, the final version of the evaluation model for the cancer registry software was presented. The evaluation model of this study contains tool and method of evaluation. The evaluation tool is a checklist including the general and specific criteria of the cancer registry software along with their sub-criteria. The evaluation method of this study was chosen as a criteria-based evaluation method based on the findings. The model of this study encompasses various dimensions of cancer registry software and a proper method for evaluating it. The strong point of this evaluation model is the separation between general criteria and the specific ones, while trying to fulfill the comprehensiveness of the criteria. Since this model has been validated, it can be used as a standard to evaluate the cancer registry software.

Software Selection: A Primer on Source and Evaluation.

ERIC Educational Resources Information Center

Burston, Jack

2003-01-01

Provides guidance on making decisions regarding the selection of foreign language instructional software. Identifies sources of foreign language software, indicates sources of foreign language software reviews, and outlines essential procedures of software evaluation. (Author/VWL)

Delivering real-time status and arrival information to commuter rail passengers at complex stations

DOT National Transportation Integrated Search

2003-08-01

Software was developed for calculating real-time train status in an Automated Train Information Display System (ATIDS) at NJ Transit. Interfaces were developed for passing schedules and real-time train position and routing data from a rail traffic co...

Software component quality evaluation

NASA Technical Reports Server (NTRS)

Clough, A. J.

1991-01-01

The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

SimCell Status Board

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tanzman, Edward; Dactelides, John M; Sharp, Robert

The Virtual SimCell is a method embodied in several software applications based on the Virtual Community Platform (VCP) (ANL-SF-11-049) and its Real-Time Dashboard (RTD) app. The purpose of this method is to more efficiently facilitate emergency preparedness exercises by allowing emergency preparedness exercise Simulation Cells -- SimCells -- to be established and managed through a computer network. SimCells take the place of organizations that would respond to actual emergencies, but are not participants in exercises of emergency preparedness plans. In effect, SimCells serve as actors portraying how those organizations would respond during real emergency events. The SimCell Status Board (SSB)more » is an RTD mini-app for controllers to communicate exercise events to players and each other by entering information into an integrated system of pre-defined data fields, displaying those data effectively, and preserving them for easy access during exercise evaluations.« less

Discrete Address Beacon System (DABS) Software System Reliability Modeling and Prediction.

DTIC Science & Technology

1981-06-01

Service ( ATARS ) module because of its interim status. Reliability prediction models for software modules were derived and then verified by matching...System (A’iCR3BS) and thus can be introduced gradually and economically without ma jor olper- ational or procedural change. Since DABS uses monopulse...lineanaly- sis tools or are ured during maintenance or pre-initialization were not modeled because they are not part of the mission software. The ATARS

Advanced Spacesuit Informatics Software Design for Power, Avionics and Software Version 2.0

NASA Technical Reports Server (NTRS)

Wright, Theodore W.

2016-01-01

A description of the software design for the 2016 edition of the Informatics computer assembly of the NASAs Advanced Extravehicular Mobility Unit (AEMU), also called the Advanced Spacesuit. The Informatics system is an optional part of the spacesuit assembly. It adds a graphical interface for displaying suit status, timelines, procedures, and warning information. It also provides an interface to the suit mounted camera for recording still images, video, and audio field notes.

Automation system for neutron activation analysis at the reactor IBR-2, Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research, Dubna, Russia.

PubMed

Pavlov, Sergey S; Dmitriev, Andrey Yu; Frontasyeva, Marina V

The present status of development of software packages and equipment designed for automation of NAA at the reactor IBR-2 of FLNP, JINR, Dubna, RF, is described. The NAA database, construction of sample changers and software for automation of spectra measurement and calculation of concentrations are presented. Automation of QC procedures is integrated in the software developed. Details of the design are shown.

World Workshop on Oral Medicine VI: Utilization of Oral Medicine-specific software for support of clinical care, research, and education: current status and strategy for broader implementation.

PubMed

Brailo, Vlaho; Firriolo, Francis John; Tanaka, Takako Imai; Varoni, Elena; Sykes, Rosemary; McCullough, Michael; Hua, Hong; Sklavounou, Alexandra; Jensen, Siri Beier; Lockhart, Peter B; Mattsson, Ulf; Jontell, Mats

2015-08-01

To assess the current scope and status of Oral Medicine-specific software (OMSS) utilized to support clinical care, research, and education in Oral Medicine and to propose a strategy for broader implementation of OMSS within the global Oral Medicine community. An invitation letter explaining the objectives was sent to the global Oral Medicine community. Respondents were interviewed to obtain information about different aspects of OMSS functionality. Ten OMSS tools were identified. Four were being used for clinical care, one was being used for research, two were being used for education, and three were multipurpose. Clinical software was being utilized as databases developed to integrate of different type of clinical information. Research software was designed to facilitate multicenter research. Educational software represented interactive, case-orientated technology designed for clinical training in Oral Medicine. Easy access to patient data was the most commonly reported advantage. Difficulty of use and poor integration with other software was the most commonly reported disadvantage. The OMSS presented in this paper demonstrate how information technology (IT) can have an impact on the quality of patient care, research, and education in the field of Oral Medicine. A strategy for broader implementation of OMSS is proposed. Copyright © 2015 Elsevier Inc. All rights reserved.

A new Link for Geographic analyses of Inventory Data

Treesearch

David Reed; Kurt Pregitzer; Scott A. Pugh; Patrick D. Miles

2001-01-01

The USDA Forest Service Forest Inventory and Analysis (FIA)data are widely used throughout the United States for analyses of forest status and trends, landscape-level forest composition, and other forest characteristics. A new software product, FIAMODEL, is available for analyzing FIA data within the ArcView? (ESRI, Inc.)geographic information system. The software...

Cargo Movement Operations System (CMOS) Final Software Design Document, Change 01, Increment I

DTIC Science & Technology

1991-03-22

NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SDDl-0002 PROGRAM OFFICE...COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SDDl-0003 PROGRAM OFFICE CONTROL NUMBER: DATA...CARMODE and SURRTG. RATIONALE: Request clarification of these deletions. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [

Cargo Movement Operations System (CMOS). Software Requirements Specification, Increment 1, Change 02

DTIC Science & Technology

1990-05-24

COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ CLOSED [ ] ORIGINATOR CONTROL NUMBER: SRS2-0002 PROGRAM OFFICE CONTROL NUMBER: DATA...ACCEPTS COMMENT: YES ( J NO [ ) COMMENT DISPOSITION: COMMENT STATUS: OPEN [ J CLOSED [ ] ORIGINATOR CONTROL NUMBER: SRS2-0003 PROGRAM OFFICE CONTROL...NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO ( ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ J ORIGINATOR CONTROL NUMBER: SRS2-0004 PROGRAM

Cargo Movement Operations System (CMOS) Draft Software Test Plan. Increment II

DTIC Science & Technology

1991-02-14

COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: ACCEPT [ ] REJECT [ J COMMENT STATUS: OPEN [ ] CLOSED [ ] Cmnt Page Paragraph No. No. Number Comment 1. 5 2...ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ J CLOSED [ ] ORIGINATOR CONTROL NUMBER: STP-0003 PROGRAM OFFICE CONTROL...NO [1 ERCI ACCEPTS COMMENT: YES [ 1 NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: STP-0004 PROGRAM

Cargo Movement Operations System (CMOS). Software Requirements Specification (Applications CSCI) Increment 1, Update

DTIC Science & Technology

1990-05-31

12. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED...ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ 3 ORIGINATOR CONTROL NUMBER: SRS1-0004 PROGRAM OFFICE...operational state of the SBSS. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN

Cargo Movement Operations System (CMOS) Draft Software User’s Manual Increment II

DTIC Science & Technology

1991-06-26

the user. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED...indicated. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR...YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN r I CLOSED [ ] ORIGINATOR CONTROL NUMBER: SUM-0006 PROGRAM OFFICE CONTROL NUMBER: DATA ITEM

Study of Tools for Network Discovery and Network Mapping

DTIC Science & Technology

2003-11-01

connected to the switch. iv. Accessibility of historical data and event data In general, network discovery tools keep a history of the collected...has the following software dependencies: - Java Virtual machine 76 - Perl modules - RRD Tool - TomCat - PostgreSQL STRENGTHS AND...systems - provide a simple view of the current network status - generate alarms on status change - generate history of status change VISUAL MAP

Practical, redundant, failure-tolerant, self-reconfiguring embedded system architecture

DOEpatents

Klarer, Paul R.; Hayward, David R.; Amai, Wendy A.

2006-10-03

This invention relates to system architectures, specifically failure-tolerant and self-reconfiguring embedded system architectures. The invention provides both a method and architecture for redundancy. There can be redundancy in both software and hardware for multiple levels of redundancy. The invention provides a self-reconfiguring architecture for activating redundant modules whenever other modules fail. The architecture comprises: a communication backbone connected to two or more processors and software modules running on each of the processors. Each software module runs on one processor and resides on one or more of the other processors to be available as a backup module in the event of failure. Each module and backup module reports its status over the communication backbone. If a primary module does not report, its backup module takes over its function. If the primary module becomes available again, the backup module returns to its backup status.

Information Technology in Libraries. A Pakistani Perspective.

ERIC Educational Resources Information Center

Mahmood, Khalid

This book presents an overview of the present status of the use of library automation hardware and software in Pakistan. The following 20 articles are included: (1) "The Status of Library Automation in Pakistan"; (2) "Promoting Information Technology in Pakistan: the Netherlands Library Development Project"; (3) "Library…

Automated Testing Experience of the Linear Aerospike SR-71 Experiment (LASRE) Controller

NASA Technical Reports Server (NTRS)

Larson, Richard R.

1999-01-01

System controllers must be fail-safe, low cost, flexible to software changes, able to output health and status words, and permit rapid retest qualification. The system controller designed and tested for the aerospike engine program was an attempt to meet these requirements. This paper describes (1) the aerospike controller design, (2) the automated simulation testing techniques, and (3) the real time monitoring data visualization structure. Controller cost was minimized by design of a single-string system that used an off-the-shelf 486 central processing unit (CPU). A linked-list architecture, with states (nodes) defined in a user-friendly state table, accomplished software changes to the controller. Proven to be fail-safe, this system reported the abort cause and automatically reverted to a safe condition for any first failure. A real time simulation and test system automated the software checkout and retest requirements. A program requirement to decode all abort causes in real time during all ground and flight tests assured the safety of flight decisions and the proper execution of mission rules. The design also included health and status words, and provided a real time analysis interpretation for all health and status data.

Relation Between Periodontal Status and Pre-Cancerous Condition (Oral Lichen Planus): A Pilot Study.

PubMed

Rai, Narendra Parkash; Kumar, Prafful; Mustafa, Shabil M; Divakar, Darshan D; Kheraif, Abdulaziz Al; Ramakrishnaiah, Ravikumar; Vellapally, Sajith; Dalati, M H N; Parine, Narashimha Reddy; Anil, Sukumaran

2016-01-01

Oral lichen planus (OLP) is a common chronic mucocutaneous disease mostly seen in middle aged and elderly females. Oral lichen planus can occur in different oral sites such as gingiva, labial, buccal mucosa and on the tongue. And can have an indirect effect on initiating periodontitis. The purpose of the study was to evaluate the periodontal status of OLP patients and compare it with that of healthy controls. The presence of erosive lesions among gingival tissues makes oral hygiene procedures difficult to perform for obvious reasons. Plaque control and rigorous oral hygiene are primary requisites for the treatment of any oro-mucosal disease. Thirty patients with the erosive and reticular form of OLP as a study group and 30 healthy subjects as a control group were selected. The periodontal status of all subjects including gingival index (GI), Russell's periodontal index (PI) and bleeding on probing (BOP) were evaluated in both groups. Finally, the data was analyzed by a paired t-test using SPSS software v. 22. The mean values of GI, PI and BOP were observed to be higher in the study group compared to the control group, and this was statistically significant (p < 0.05). The results shown are suggestive that periodontal status was poor in the study group as compared to the control group. Further studies need to investigate periodontal status in oral lichen planus patients with larger sample size, and careful follow-up of these will assure an increase in the quality of life of these patients. The patient should be informed regarding the risk of periodontal problems in OLP and should be advised to have regular dental checkups to avoid a worsening of the conditio.

Comparison of in-hospital versus 30-day mortality assessments for selected medical conditions.

PubMed

Borzecki, Ann M; Christiansen, Cindy L; Chew, Priscilla; Loveland, Susan; Rosen, Amy K

2010-12-01

In-hospital mortality measures such as the Agency for Healthcare Research and Quality (AHRQ) Inpatient Quality Indicators (IQIs) are easily derived using hospital discharge abstracts and publicly available software. However, hospital assessments based on a 30-day postadmission interval might be more accurate given potential differences in facility discharge practices. To compare in-hospital and 30-day mortality rates for 6 medical conditions using the AHRQ IQI software. We used IQI software (v3.1) and 2004-2007 Veterans Health Administration (VA) discharge and Vital Status files to derive 4-year facility-level in-hospital and 30-day observed mortality rates and observed/expected ratios (O/Es) for admissions with a principal diagnosis of acute myocardial infarction, congestive heart failure, stroke, gastrointestinal hemorrhage, hip fracture, and pneumonia. We standardized software-calculated O/Es to the VA population and compared O/Es and outlier status across sites using correlation, observed agreement, and kappas. Of 119 facilities, in-hospital versus 30-day mortality O/E correlations were generally high (median: r = 0.78; range: 0.31-0.86). Examining outlier status, observed agreement was high (median: 84.7%, 80.7%-89.1%). Kappas showed at least moderate agreement (k > 0.40) for all indicators except stroke and hip fracture (k ≤ 0.22). Across indicators, few sites changed from a high to nonoutlier or low outlier, or vice versa (median: 10, range: 7-13). The AHRQ IQI software can be easily adapted to generate 30-day mortality rates. Although 30-day mortality has better face validity as a hospital performance measure than in-hospital mortality, site assessments were similar despite the definition used. Thus, the measure selected for internal benchmarking should primarily depend on the healthcare system's data linkage capabilities.

Software OT&E Guidelines. Volume 3. Software Maintainability Evaluator’s Handbook

DTIC Science & Technology

1980-04-01

SOFTWARE OT&E " 1 GUIDELINES . VOLUME III SOFTWARE MAINTAINABILITY EVALUATOR’S HANDBOOK APRIL 1980 AIR FORCE TEST AND EVALUATION CENTER KIRTLAND AIR...FORCE BASE NEW MEXICO 87117 C-, -j AfTECP 800-3 AF’r...........3 ...... UNCLASSIFIED SECURITY CLASSIFICATION OF THIS PAGE (When D.. Entered) RE:PORT...c -. 5 TY!aJ0. PERIOD COVERED SOFTWARE OT& . GUIDELINES, Volume III .of five). -1 softare-R.aintainability Evaluator’s P-IEFnook’ 4ina. i 1980

The MEDA Project: Developing Evaluation Competence in the Training Software Domain.

ERIC Educational Resources Information Center

Machell, Joan; Saunders, Murray

1992-01-01

The MEDA (Methodologie d'Evaluation des Didacticiels pour les Adultes) tool is a generic instrument to evaluate training courseware. It was developed for software designers to improve products, for instructors to select appropriate courseware, and for distributors and consultants to match software to client needs. Describes software evaluation…

[Urban ecological land in Changsha City: its quantitative analysis and optimization].

PubMed

Li, Xiao-Li; Zeng, Guang-Ming; Shi, Lin; Liang, Jie; Cai, Qing

2010-02-01

In this paper, a hierarchy index system suitable for catastrophe progression method was constructed to comprehensively analyze and evaluate the status of ecological land construction in Changsha City in 2007. Based on the evaluation results, the irrationalities of the distribution pattern of Changsha urban ecological land were discussed. With the support of geographic information system (GIS), the ecological corridors of the urban ecological land were constructed by using the 'least-cost' modeling, and, in combining with conflict analysis, the optimum project of the urban ecological land was put forward, forming an integrated evaluation system. The results indicated that the ecological efficiency of urban ecological land in Changsha in 2007 was at medium level, with an evaluation value being 0.9416, and the quantitative index being relatively high but the coordination index being relatively low. The analysis and verification with software Fragstats showed that the ecological efficiency of the urban ecological land after optimization was higher, with the evaluation value being 0.9618, and the SHDI, CONTAG, and other indices also enhanced.

The VLBI Data Analysis Software νSolve: Development Progress and Plans for the Future

NASA Astrophysics Data System (ADS)

Bolotin, S.; Baver, K.; Gipson, J.; Gordon, D.; MacMillan, D.

2014-12-01

The program νSolve is a part of the CALC/SOLVE VLBI data analysis system. It is a replacement for interactive SOLVE, the part of CALC/SOLVE that is used for preliminary data analysis of new VLBI sessions. νSolve is completely new software. It is written in C++ and has a modern graphical user interface. In this article we present the capabilities of the software, its current status, and our plans for future development.

Cargo Movement Operations System (CMOS). Final Software Requirements Specification, (Applications CSCI), Increment II

DTIC Science & Technology

1991-01-29

NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN ( ] CLOSED [ ] ORIGINATOR CONTROL Nt3MBFR: SRS1-0002 PROGRAM OFFICE CONTROL NUMBER: DATA ITEM...floppy diskette interface with CMOS. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES ( 3 NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [

Selecting Software for Libraries.

ERIC Educational Resources Information Center

Beiser, Karl

1993-01-01

Discusses resources and strategies that libraries can use to evaluate competing database management software for purchase. Needs assessments, types of software available, features of good software, evaluation aids, shareware, and marketing and product trends are covered. (KRN)

Cargo Movement Operations System (CMOS). Draft Software Design Document for the PC UNIX Prototype (Air Force Configuration), Increment III

DTIC Science & Technology

1991-04-21

COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ I CLOSED [ ] ORIGINATOR CONTROL NUMBER: SDD-0002...ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS! OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SDD-0003 PROGRAM OFFICE CONTROL...COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SDD-0004 PROGPLAM OFFICE CONTROL NUMBER

A research of the community’s opening to the outside world

NASA Astrophysics Data System (ADS)

Xu, Lan; Liu, Xiangzhuo

2017-03-01

Closed residential areas, called community, the traffic network and result in various degrees of traffic congestion such as amputating, dead ends and T-shaped roads. In order to reveal the mechanism of the congestion, establish an effective evaluation index system and finally provide theoretical basis for the study of traffic congestion, we have done researches on factors for traffic congestion and have established a scientific evaluation index system combining experiences home and abroad, based on domestic congestion status. Firstly, we analyse the traffic network as the entry point, and then establish the evaluation model of road capacity with the method of AHP index system. Secondly, we divide the condition of urban congestion into 5 levels from congestion to smoothness. Besides, with VISSIM software, simulations about traffic capacity before and after community opening are carried out. Finally, we provide forward reasonable suggestions upon the combination of models and reality.

A Process for Evaluating Student Records Management Software. ERIC/AE Digest.

ERIC Educational Resources Information Center

Vecchioli, Lisa

This digest provides practical advice on evaluating software for managing student records. An evaluation of record-keeping software should start with a process to identify all of the individual needs the software produce must meet in order to be considered for purchase. The first step toward establishing an administrative computing system is…

[Electromyography Analysis of Rapid Eye Movement Sleep Behavior Disorder].

PubMed

Nakano, Natsuko; Kinoshita, Fumiya; Takada, Hiroki; Nakayama, Meiho

2018-01-01

Polysomnography (PSG), which records physiological phenomena including brain waves, breathing status, and muscle tonus, is useful for the diagnosis of sleep disorders as a gold standard. However, measurement and analysis are complex for several specific sleep disorders, such as rapid eye movement (REM) sleep behavior disorder (RBD). Usually, brain waves during REM sleep indicate an awakening pattern under relaxed conditions of skeletal and antigravity muscles. However, these muscles are activated during REM sleep when patients suffer from RBD. These activated muscle movements during REM, so-called REM without atonia (RWA) recorded by PSG, may be related to a neurodegenerative disease such as Parkinson's disease. Thus, careful analysis of RWA is significant not only physically, but also clinically. Commonly, manual viewing measurement analysis of RWA is time-consuming. Therefore, quantitative studies on RWA are rarely reported. A software program, developed from Microsoft Office Excel ® , was used to semiautomatically analyze the RWA ratio extracted from PSG to compare with manual viewing measurement analysis. In addition, a quantitative muscle tonus study was carried out to evaluate the effect of medication on RBD patients. Using this new software program, we were able to analyze RWA on the same cases in approximately 15 min as compared with 60 min in the manual viewing measurement analysis. This software program can not only quantify RWA easily but also identify RWA waves for either phasic or tonic bursts. We consider that this software program will support physicians and scientists in their future research on RBD. We are planning to offer this software program for free to physicians and scientists.

Cleanroom Software Engineering Reference Model. Version 1.0.

DTIC Science & Technology

1996-11-01

teams. It also serves as a baseline for continued evolution of Cleanroom practice. The scope of the CRM is software management , specification...addition to project staff, participants include management , peer organization representatives, and customer representatives as appropriate for...2 Review the status of the process with management , the project team, peer groups, and the customer . These verification activities include

FIAMODEL : a new link for geographic analyses of inventory data

Treesearch

David Reed; Kurt Pregitzer; Scott A. Pugh; Patrick Miles

2001-01-01

The USDA Forest Service Forest Inventory and Analysis (FIA) data are widely used throughtout the United States for analyses of forest status and trends, landscape-level forest composition, and other forest characteristics. A new software product, FIAMODEL, is available for analyzing FIA data within the ArcView (ESRI,Inc.) geographic information system. The software...

Development and verification testing of automation and robotics for assembly of space structures

NASA Technical Reports Server (NTRS)

Rhodes, Marvin D.; Will, Ralph W.; Quach, Cuong C.

1993-01-01

A program was initiated within the past several years to develop operational procedures for automated assembly of truss structures suitable for large-aperture antennas. The assembly operations require the use of a robotic manipulator and are based on the principle of supervised autonomy to minimize crew resources. A hardware testbed was established to support development and evaluation testing. A brute-force automation approach was used to develop the baseline assembly hardware and software techniques. As the system matured and an operation was proven, upgrades were incorprated and assessed against the baseline test results. This paper summarizes the developmental phases of the program, the results of several assembly tests, the current status, and a series of proposed developments for additional hardware and software control capability. No problems that would preclude automated in-space assembly of truss structures have been encountered. The current system was developed at a breadboard level and continued development at an enhanced level is warranted.

[Pregnant women's food safety and nutritional status in Cartagena, Colombia 2011].

PubMed

López-Sáleme, Rossana; Díaz-Montes, Carmen E; Bravo-Aljuriz, Leidy; Londoño-Hio, Nataly P; Salguedo-Pájaro, Maireng del Carmen; Camargo-Marín, Casandra C; Osorio-Espitia, Eider

2012-01-01

Establishing an association between food safety and nutritional status in pregnant women in Cartagena. This was a cross-sectional study, using a sample of 413 pregnant women living in urban areas who were affiliated to healthcare-providing companies in Cartagena. A 95 % confidence level, 5 % error and 0.41 prevalence were used. they were stratified by proportional allocation; nutritional status was identified by anthropometric indicators plotted on a Rosso-Mardones nomogram and food safety was determined by a national survey of the situation. Stata 9.2 statistical software was used for a descriptive analysis of the data using frequencies, percentages, averages and standard deviations. The odds ratio (OR)* and p <0.05 significance level were estimated in bivariate analysis. Mean age was 24.3 years-old, 72.2 % were living with a partner and 52 % belonged to stratum 1; it was determined that 70.2 % had food safety. Regarding nutritional status, it was observed that 42 % had maintained appropriate weight during pregnancy. Food safety was not associated with nutritional status (OR 0.8; 0.5-1.3 95 %CI). A high percentage of pregnant women had altered nutritional status, tending towards deficit or towards increase reported as having food safety. This may have been because this study assessed food safety in relation to even though the pregnant women may have had food available, this did not guarantee that they consumed it in suitable quantities and/or quality, such aspects not having been evaluated in this study.

Considerations for the Evaluation of Software.

ERIC Educational Resources Information Center

Fields, Thomas A.

1984-01-01

The paper describes the decision process in the determination of software purchase for the professional's use of the microcomputer. Consideration to ensure that the software purchased will be a success, which software will be needed, and options that will facilitate the location and evaluation of software are discussed. (Author/CL)

The Validation of a Software Evaluation Instrument.

ERIC Educational Resources Information Center

Schmitt, Dorren Rafael

This study, conducted at six southern universities, analyzed the validity and reliability of a researcher developed instrument designed to evaluate educational software in secondary mathematics. The instrument called the Instrument for Software Evaluation for Educators uses measurement scales, presents a summary section of the evaluation, and…

Design requirements for SRB production control system. Volume 3: Package evaluation, modification and hardware

NASA Technical Reports Server (NTRS)

1981-01-01

The software package evaluation was designed to analyze commercially available, field-proven, production control or manufacturing resource planning management technology and software package. The analysis was conducted by comparing SRB production control software requirements and conceptual system design to software package capabilities. The methodology of evaluation and the findings at each stage of evaluation are described. Topics covered include: vendor listing; request for information (RFI) document; RFI response rate and quality; RFI evaluation process; and capabilities versus requirements.

Research on software behavior trust based on hierarchy evaluation

NASA Astrophysics Data System (ADS)

Long, Ke; Xu, Haishui

2017-08-01

In view of the correlation software behavior, we evaluate software behavior credibility from two levels of control flow and data flow. In control flow level, method of the software behavior of trace based on support vector machine (SVM) is proposed. In data flow level, behavioral evidence evaluation based on fuzzy decision analysis method is put forward.

Evaluation and selection of open-source EMR software packages based on integrated AHP and TOPSIS.

PubMed

Zaidan, A A; Zaidan, B B; Al-Haiqi, Ahmed; Kiah, M L M; Hussain, Muzammil; Abdulnabi, Mohamed

2015-02-01

Evaluating and selecting software packages that meet the requirements of an organization are difficult aspects of software engineering process. Selecting the wrong open-source EMR software package can be costly and may adversely affect business processes and functioning of the organization. This study aims to evaluate and select open-source EMR software packages based on multi-criteria decision-making. A hands-on study was performed and a set of open-source EMR software packages were implemented locally on separate virtual machines to examine the systems more closely. Several measures as evaluation basis were specified, and the systems were selected based a set of metric outcomes using Integrated Analytic Hierarchy Process (AHP) and TOPSIS. The experimental results showed that GNUmed and OpenEMR software can provide better basis on ranking score records than other open-source EMR software packages. Copyright © 2014 Elsevier Inc. All rights reserved.

Requirements for a multifunctional code architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tiihonen, O.; Juslin, K.

1997-07-01

The present paper studies a set of requirements for a multifunctional simulation software architecture in the light of experiences gained in developing and using the APROS simulation environment. The huge steps taken in the development of computer hardware and software during the last ten years are changing the status of the traditional nuclear safety analysis software. The affordable computing power on the safety analysts table by far exceeds the possibilities offered to him/her ten years ago. At the same time the features of everyday office software tend to set standards to the way the input data and calculational results aremore » managed.« less

Tools to Support the Reuse of Software Assets for the NASA Earth Science Decadal Survey Missions

NASA Technical Reports Server (NTRS)

Mattmann, Chris A.; Downs, Robert R.; Marshall, James J.; Most, Neal F.; Samadi, Shahin

2011-01-01

The NASA Earth Science Data Systems (ESDS) Software Reuse Working Group (SRWG) is chartered with the investigation, production, and dissemination of information related to the reuse of NASA Earth science software assets. One major current objective is to engage the NASA decadal missions in areas relevant to software reuse. In this paper we report on the current status of these activities. First, we provide some background on the SRWG in general and then discuss the group s flagship recommendation, the NASA Reuse Readiness Levels (RRLs). We continue by describing areas in which mission software may be reused in the context of NASA decadal missions. We conclude the paper with pointers to future directions.

Reliability program requirements for aeronautical and space system contractors

NASA Technical Reports Server (NTRS)

1987-01-01

General reliability program requirements for NASA contracts involving the design, development, fabrication, test, and/or use of aeronautical and space systems including critical ground support equipment are prescribed. The reliability program requirements require (1) thorough planning and effective management of the reliability effort; (2) definition of the major reliability tasks and their place as an integral part of the design and development process; (3) planning and evaluating the reliability of the system and its elements (including effects of software interfaces) through a program of analysis, review, and test; and (4) timely status indication by formal documentation and other reporting to facilitate control of the reliability program.

Four applications of a software data collection and analysis methodology

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Selby, Richard W., Jr.

1985-01-01

The evaluation of software technologies suffers because of the lack of quantitative assessment of their effect on software development and modification. A seven-step data collection and analysis methodology couples software technology evaluation with software measurement. Four in-depth applications of the methodology are presented. The four studies represent each of the general categories of analyses on the software product and development process: blocked subject-project studies, replicated project studies, multi-project variation studies, and single project strategies. The four applications are in the areas of, respectively, software testing, cleanroom software development, characteristic software metric sets, and software error analysis.

Hardware and software status of QCDOC

NASA Astrophysics Data System (ADS)

Boyle, P. A.; Chen, D.; Christ, N. H.; Clark, M.; Cohen, S. D.; Cristian, C.; Dong, Z.; Gara, A.; Joó, B.; Jung, C.; Kim, C.; Levkova, L.; Liao, X.; Liu, G.; Mawhinney, R. D.; Ohta, S.; Petrov, K.; Wettig, T.; Yamaguchi, A.

2004-03-01

QCDOC is a massively parallel supercomputer whose processing nodes are based on an application-specific integrated circuit (ASIC). This ASIC was custom-designed so that crucial lattice QCD kernels achieve an overall sustained performance of 50% on machines with several 10,000 nodes. This strong scalability, together with low power consumption and a price/performance ratio of $1 per sustained MFlops, enable QCDOC to attack the most demanding lattice QCD problems. The first ASICs became available in June of 2003, and the testing performed so far has shown all systems functioning according to specification. We review the hardware and software status of QCDOC and present performance figures obtained in real hardware as well as in simulation.

Grid Stability Awareness System (GSAS) Final Scientific/Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feuerborn, Scott; Ma, Jian; Black, Clifton

The project team developed a software suite named Grid Stability Awareness System (GSAS) for power system near real-time stability monitoring and analysis based on synchrophasor measurement. The software suite consists of five analytical tools: an oscillation monitoring tool, a voltage stability monitoring tool, a transient instability monitoring tool, an angle difference monitoring tool, and an event detection tool. These tools have been integrated into one framework to provide power grid operators with both real-time or near real-time stability status of a power grid and historical information about system stability status. These tools are being considered for real-time use in themore » operation environment.« less

Cargo Movement Operations System (CMOS) Final Software User’s Manual

DTIC Science & Technology

1990-12-20

CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: ACCEPT [ ] REJECT [ I COMMENT STATUS: OPEN...is correct. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS CO1MENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED...RATIONALE: .."DA001041" is in the SUM but not in the SDD. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [

Evaluation of Agricultural Accounting Software. Improved Decision Making. Third Edition.

ERIC Educational Resources Information Center

Lovell, Ashley C., Comp.

Following a discussion of the evaluation criteria for choosing accounting software, this guide contains reviews of 27 accounting software programs that could be used by farm or ranch business managers. The information in the reviews was provided by the software vendors and covers the following points for each software package: general features,…

Sustaining Software-Intensive Systems

DTIC Science & Technology

2006-05-01

2.2 Multi- Service Operational Test and Evaluation .......................................4 2.3 Stable Software Baseline...or equivalent document • completed Multi- Service Operational Test and Evaluation (MOT&E) for the potential production software package (or OT&E if...not multi- service ) • stable software production baseline • complete and current software documentation • Authority to Operate (ATO) for an

Application of Experimental and Quasi-Experimental Research Designs to Educational Software Evaluation.

ERIC Educational Resources Information Center

Muller, Eugene W.

1985-01-01

Develops generalizations for empirical evaluation of software based upon suitability of several research designs--pretest posttest control group, single-group pretest posttest, nonequivalent control group, time series, and regression discontinuity--to type of software being evaluated, and on circumstances under which evaluation is conducted. (MBR)

Dietary status of trained female cyclists.

PubMed

Keith, R E; O'Keeffe, K A; Alt, L A; Young, K L

1989-11-01

Dietary status was evaluated in eight highly trained female cyclists. Each cyclist kept a 3-day weighed food record. Diets were analyzed for nutrient content using a computerized software package. Blood was also obtained and evaluated for hemoglobin, hematocrit, and albumin. For an athletic group, the cyclists' diets were found to be low in energy (85% RDA) and carbohydrate (4.4 gm/kg body weight per day). Mean daily dietary intakes were well below the RDAs for folacin (76% RDA), magnesium (81%), iron (59%), and zinc (48%). In addition, more than one-third of the cyclists failed to consume 67% of the RDA for the following micronutrients: pyridoxine, folacin, cobalamin, vitamin E, magnesium, iron, and zinc. Hemoglobin (135 gm/L), hematocrit (0.39), and albumin (45 gm/L) values were all normal, although most hemoglobin values were in the lower 50% of normal range. Foods such as meats, poultry, fish, beans, peas, and nuts were low or absent from the diets of most athletes. Dietary quality in this group of female cyclists could have been greatly improved with the addition of more of those foods. These athletes could benefit from nutrition education and diet counseling.

Real-Time GPS Monitoring for Earthquake Rapid Assessment in the San Francisco Bay Area

NASA Astrophysics Data System (ADS)

Guillemot, C.; Langbein, J. O.; Murray, J. R.

2012-12-01

The U.S. Geological Survey Earthquake Science Center has deployed a network of eight real-time Global Positioning System (GPS) stations in the San Francisco Bay area and is implementing software applications to continuously evaluate the status of the deformation within the network. Real-time monitoring of the station positions is expected to provide valuable information for rapidly estimating source parameters should a large earthquake occur in the San Francisco Bay area. Because earthquake response applications require robust data access, as a first step we have developed a suite of web-based applications which are now routinely used to monitor the network's operational status and data streaming performance. The web tools provide continuously updated displays of important telemetry parameters such as data latency and receive rates, as well as source voltage and temperature information within each instrument enclosure. Automated software on the backend uses the streaming performance data to mitigate the impact of outages, radio interference and bandwidth congestion on deformation monitoring operations. A separate set of software applications manages the recovery of lost data due to faulty communication links. Displacement estimates are computed in real-time for various combinations of USGS, Plate Boundary Observatory (PBO) and Bay Area Regional Deformation (BARD) network stations. We are currently comparing results from two software packages (one commercial and one open-source) used to process 1-Hz data on the fly and produce estimates of differential positions. The continuous monitoring of telemetry makes it possible to tune the network to minimize the impact of transient interruptions of the data flow, from one or more stations, on the estimated positions. Ongoing work is focused on using data streaming performance history to optimize the quality of the position, reduce drift and outliers by switching to the best set of stations within the network, and automatically select the "next best" station to use as reference. We are also working towards minimizing the loss of streamed data during concurrent data downloads by improving file management on the GPS receivers.

The development and technology transfer of software engineering technology at NASA. Johnson Space Center

NASA Technical Reports Server (NTRS)

Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

1992-01-01

The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

Using PATIMDB to Create Bacterial Transposon Insertion Mutant Libraries

PubMed Central

Urbach, Jonathan M.; Wei, Tao; Liberati, Nicole; Grenfell-Lee, Daniel; Villanueva, Jacinto; Wu, Gang; Ausubel, Frederick M.

2015-01-01

PATIMDB is a software package for facilitating the generation of transposon mutant insertion libraries. The software has two main functions: process tracking and automated sequence analysis. The process tracking function specifically includes recording the status and fates of multiwell plates and samples in various stages of library construction. Automated sequence analysis refers specifically to the pipeline of sequence analysis starting with ABI files from a sequencing facility and ending with insertion location identifications. The protocols in this unit describe installation and use of PATIMDB software. PMID:19343706

Software Architecture Evaluation in Global Software Development Projects

NASA Astrophysics Data System (ADS)

Salger, Frank

Due to ever increasing system complexity, comprehensive methods for software architecture evaluation become more and more important. This is further stressed in global software development (GSD), where the software architecture acts as a central knowledge and coordination mechanism. However, existing methods for architecture evaluation do not take characteristics of GSD into account. In this paper we discuss what aspects are specific for architecture evaluations in GSD. Our experiences from GSD projects at Capgemini sd&m indicate, that architecture evaluations differ in how rigorously one has to assess modularization, architecturally relevant processes, knowledge transfer and process alignment. From our project experiences, we derive nine good practices, the compliance to which should be checked in architecture evaluations in GSD. As an example, we discuss how far the standard architecture evaluation method used at Capgemini sd&m already considers the GSD-specific good practices, and outline what extensions are necessary to achieve a comprehensive architecture evaluation framework for GSD.

[Designing a software for drug management in special situations at a hospital's drug administration service].

PubMed

Sánchez Cuervo, Marina; Muñoz García, María; Gómez de Salazar López de Silanes, María Esther; Bermejo Vicedo, Teresa

2015-03-01

to describe the features of a computer program for management of drugs in special situations (off-label and compassionate use) in a Department of Hospital Pharmacy (PD). To describe the methodology followed for its implementation in the Medical Services. To evaluate their use after 2 years of practice. the design was carried out by pharmacists of the PD. The stages of the process were: selection of a software development company, establishment of a working group, selection of a development platform, design of an interactive Viewer, definition of functionality and data processing, creation of databases, connection, installation and configuration, application testing and improvements development. A directed sequential strategy was used for implementation in the Medical Services. The program's utility and experience of use were evaluated after 2 years. a multidisciplinary working group was formed and developed Pk_Usos®. The program works in web environment with a common viewer for all users enabling real time checking of the request files' status and that adapts to the management of medications in special situations procedure. Pk_Usos® was introduced first in the Oncology Department, with 15 oncologists as users of the program. 343 patients had 384 treatment requests managed, of which 363 are authorized throughout two years. PK_Usos® is the first software designed for the management of drugs in special situations in the PD. It is a dynamic and efficient tool for all professionals involved in the process by optimization of times. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

ATLAS tile calorimeter cesium calibration control and analysis software

NASA Astrophysics Data System (ADS)

Solovyanov, O.; Solodkov, A.; Starchenko, E.; Karyukhin, A.; Isaev, A.; Shalanda, N.

2008-07-01

An online control system to calibrate and monitor ATLAS Barrel hadronic calorimeter (TileCal) with a movable radioactive source, driven by liquid flow, is described. To read out and control the system an online software has been developed, using ATLAS TDAQ components like DVS (Diagnostic and Verification System) to verify the hardware before running, IS (Information Server) for data and status exchange between networked computers, and other components like DDC (DCS to DAQ Connection), to connect to PVSS-based slow control systems of Tile Calorimeter, high voltage and low voltage. A system of scripting facilities, based on Python language, is used to handle all the calibration and monitoring processes from hardware perspective to final data storage, including various abnormal situations. A QT based graphical user interface to display the status of the calibration system during the cesium source scan is described. The software for analysis of the detector response, using online data, is discussed. Performance of the system and first experience from the ATLAS pit are presented.

Beamline Insertions Manager at Jefferson Lab

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Michael C.

2015-09-01

The beam viewer system at Jefferson Lab provides operators and beam physicists with qualitative and quantitative information on the transverse electron beam properties. There are over 140 beam viewers installed on the 12 GeV CEBAF accelerator. This paper describes an upgrade consisting of replacing the EPICS-based system tasked with managing all viewers with a mixed system utilizing EPICS and high-level software. Most devices, particularly the beam viewers, cannot be safely inserted into the beam line during high-current beam operations. Software is partly responsible for protecting the machine from untimely insertions. The multiplicity of beam-blocking and beam-vulnerable devices motivates us tomore » try a data-driven approach. The beamline insertions application components are centrally managed and configured through an object-oriented software framework created for this purpose. A rules-based engine tracks the configuration and status of every device, along with the beam status of the machine segment containing the device. The application uses this information to decide on which device actions are allowed at any given time.« less

The Particle Physics Data Grid. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Livny, Miron

2002-08-16

The main objective of the Particle Physics Data Grid (PPDG) project has been to implement and evaluate distributed (Grid-enabled) data access and management technology for current and future particle and nuclear physics experiments. The specific goals of PPDG have been to design, implement, and deploy a Grid-based software infrastructure capable of supporting the data generation, processing and analysis needs common to the physics experiments represented by the participants, and to adapt experiment-specific software to operate in the Grid environment and to exploit this infrastructure. To accomplish these goals, the PPDG focused on the implementation and deployment of several critical services:more » reliable and efficient file replication service, high-speed data transfer services, multisite file caching and staging service, and reliable and recoverable job management services. The focus of the activity was the job management services and the interplay between these services and distributed data access in a Grid environment. Software was developed to study the interaction between HENP applications and distributed data storage fabric. One key conclusion was the need for a reliable and recoverable tool for managing large collections of interdependent jobs. An attached document provides an overview of the current status of the Directed Acyclic Graph Manager (DAGMan) with its main features and capabilities.« less

Presenting an evaluation model of the trauma registry software.

PubMed

Asadi, Farkhondeh; Paydar, Somayeh

2018-04-01

Trauma is a major cause of 10% death in the worldwide and is considered as a global concern. This problem has made healthcare policy makers and managers to adopt a basic strategy in this context. Trauma registry has an important and basic role in decreasing the mortality and the disabilities due to injuries resulted from trauma. Today, different software are designed for trauma registry. Evaluation of this software improves management, increases efficiency and effectiveness of these systems. Therefore, the aim of this study is to present an evaluation model for trauma registry software. The present study is an applied research. In this study, general and specific criteria of trauma registry software were identified by reviewing literature including books, articles, scientific documents, valid websites and related software in this domain. According to general and specific criteria and related software, a model for evaluating trauma registry software was proposed. Based on the proposed model, a checklist designed and its validity and reliability evaluated. Mentioned model by using of the Delphi technique presented to 12 experts and specialists. To analyze the results, an agreed coefficient of %75 was determined in order to apply changes. Finally, when the model was approved by the experts and professionals, the final version of the evaluation model for the trauma registry software was presented. For evaluating of criteria of trauma registry software, two groups were presented: 1- General criteria, 2- Specific criteria. General criteria of trauma registry software were classified into four main categories including: 1- usability, 2- security, 3- maintainability, and 4-interoperability. Specific criteria were divided into four main categories including: 1- data submission and entry, 2- reporting, 3- quality control, 4- decision and research support. The presented model in this research has introduced important general and specific criteria of trauma registry software and sub criteria related to each main criteria separately. This model was validated by experts in this field. Therefore, this model can be used as a comprehensive model and a standard evaluation tool for measuring efficiency and effectiveness and performance improvement of trauma registry software. Copyright © 2018 Elsevier B.V. All rights reserved.

Training Software Developers and Designers to Conduct Usability Evaluations

ERIC Educational Resources Information Center

Skov, Mikael Brasholt; Stage, Jan

2012-01-01

Many efforts to improve the interplay between usability evaluation and software development rely either on better methods for conducting usability evaluations or on better formats for presenting evaluation results in ways that are useful for software designers and developers. Both of these approaches depend on a complete division of work between…

Understanding Expertise-Based Training Effects on the Software Evaluation Process of Mathematics Education Teachers

ERIC Educational Resources Information Center

Incikabi, Lutfi; Sancar Tokmak, Hatice

2012-01-01

This case study examined the educational software evaluation processes of pre-service teachers who attended either expertise-based training (XBT) or traditional training in conjunction with a Software-Evaluation checklist. Forty-three mathematics teacher candidates and three experts participated in the study. All participants evaluated educational…

Analysis of key technologies for virtual instruments metrology

NASA Astrophysics Data System (ADS)

Liu, Guixiong; Xu, Qingui; Gao, Furong; Guan, Qiuju; Fang, Qiang

2008-12-01

Virtual instruments (VIs) require metrological verification when applied as measuring instruments. Owing to the software-centered architecture, metrological evaluation of VIs includes two aspects: measurement functions and software characteristics. Complexity of software imposes difficulties on metrological testing of VIs. Key approaches and technologies for metrology evaluation of virtual instruments are investigated and analyzed in this paper. The principal issue is evaluation of measurement uncertainty. The nature and regularity of measurement uncertainty caused by software and algorithms can be evaluated by modeling, simulation, analysis, testing and statistics with support of powerful computing capability of PC. Another concern is evaluation of software features like correctness, reliability, stability, security and real-time of VIs. Technologies from software engineering, software testing and computer security domain can be used for these purposes. For example, a variety of black-box testing, white-box testing and modeling approaches can be used to evaluate the reliability of modules, components, applications and the whole VI software. The security of a VI can be assessed by methods like vulnerability scanning and penetration analysis. In order to facilitate metrology institutions to perform metrological verification of VIs efficiently, an automatic metrological tool for the above validation is essential. Based on technologies of numerical simulation, software testing and system benchmarking, a framework for the automatic tool is proposed in this paper. Investigation on implementation of existing automatic tools that perform calculation of measurement uncertainty, software testing and security assessment demonstrates the feasibility of the automatic framework advanced.

Quantitative evaluation of software packages for single-molecule localization microscopy.

PubMed

Sage, Daniel; Kirshner, Hagai; Pengo, Thomas; Stuurman, Nico; Min, Junhong; Manley, Suliana; Unser, Michael

2015-08-01

The quality of super-resolution images obtained by single-molecule localization microscopy (SMLM) depends largely on the software used to detect and accurately localize point sources. In this work, we focus on the computational aspects of super-resolution microscopy and present a comprehensive evaluation of localization software packages. Our philosophy is to evaluate each package as a whole, thus maintaining the integrity of the software. We prepared synthetic data that represent three-dimensional structures modeled after biological components, taking excitation parameters, noise sources, point-spread functions and pixelation into account. We then asked developers to run their software on our data; most responded favorably, allowing us to present a broad picture of the methods available. We evaluated their results using quantitative and user-interpretable criteria: detection rate, accuracy, quality of image reconstruction, resolution, software usability and computational resources. These metrics reflect the various tradeoffs of SMLM software packages and help users to choose the software that fits their needs.

Dynamic Network Security Control Using Software Defined Networking

DTIC Science & Technology

2016-03-24

Most importantly I thank my family for understanding, loving , and thriving in the hectic world of military spouse and children. Michael C. Todd v...RBAC poses access to objects as a user to member-of group relationship . This construct results in a set of rules to govern access to objects based...API. Agent Agent.py Event.py Message.py ModSysStatus.py Event Message ModSysStatus Event - Message - ModSysStatus Relationship Figure 12. Agent Design

Network, system, and status software enhancements for the autonomously managed electrical power system breadboard. Volume 4: Graphical status display

NASA Technical Reports Server (NTRS)

Mckee, James W.

1990-01-01

This volume (4 of 4) contains the description, structured flow charts, prints of the graphical displays, and source code to generate the displays for the AMPS graphical status system. The function of these displays is to present to the manager of the AMPS system a graphical status display with the hot boxes that allow the manager to get more detailed status on selected portions of the AMPS system. The development of the graphical displays is divided into two processes; the creation of the screen images and storage of them in files on the computer, and the running of the status program which uses the screen images.

REVEAL: Software Documentation and Platform Migration

NASA Technical Reports Server (NTRS)

Wilson, Michael A.; Veibell, Victoir T.

2011-01-01

The Research Environment for Vehicle Embedded Analysis on Linux (REVEAL) is reconfigurable data acquisition software designed for network-distributed test and measurement applications. In development since 2001, it has been successfully demonstrated in support of a number of actual missions within NASA's Suborbital Science Program. Improvements to software configuration control were needed to properly support both an ongoing transition to operational status and continued evolution of REVEAL capabilities. For this reason the project described in this report targets REVEAL software source documentation and deployment of the software on a small set of hardware platforms different from what is currently used in the baseline system implementation. This presentation specifically describes the actions taken over a ten week period by two undergraduate student interns and serves as an overview of the content of the final report for that internship.

Impact of Computer Software on Advertising Media Courses: A Study of 71 Colleges and Universities.

ERIC Educational Resources Information Center

Martin, Dennis G.; Vaccaro-Lloyd, Carla

A study evaluated the impact of microcomputers and software in advertising media courses by surveying media planning instructors in 71 (out of 111) colleges and universities. The survey asked instructors to evaluate textbooks, workbooks, and computer software; to assess the impact of software on the media course; and to compare software users with…

Software OT&E Guidelines. Volume 1. Software Test Manager’s Handbook

DTIC Science & Technology

1981-02-01

on reverse side If neceeary and identify by block number) The Software OT&E Guidelines is a set of handbooks prepared by the Computer / Support Systems...is one of a set of handbooks prepared by the Computer /Support Systems Division of the Test and Evaluation Directorate, Air Force Test and Evaluation...15 E. Software Maintainability .. .. ........ ... 16 F. Standard Questionnaires. .. .. ....... .... 16 1. Operator- Computer Interface Evaluation

Industry Software Trustworthiness Criterion Research Based on Business Trustworthiness

NASA Astrophysics Data System (ADS)

Zhang, Jin; Liu, Jun-fei; Jiao, Hai-xing; Shen, Yi; Liu, Shu-yuan

To industry software Trustworthiness problem, an idea aiming to business to construct industry software trustworthiness criterion is proposed. Based on the triangle model of "trustworthy grade definition-trustworthy evidence model-trustworthy evaluating", the idea of business trustworthiness is incarnated from different aspects of trustworthy triangle model for special industry software, power producing management system (PPMS). Business trustworthiness is the center in the constructed industry trustworthy software criterion. Fusing the international standard and industry rules, the constructed trustworthy criterion strengthens the maneuverability and reliability. Quantitive evaluating method makes the evaluating results be intuitionistic and comparable.

Evaluation of Visualization Software

NASA Technical Reports Server (NTRS)

Globus, Al; Uselton, Sam

1995-01-01

Visualization software is widely used in scientific and engineering research. But computed visualizations can be very misleading, and the errors are easy to miss. We feel that the software producing the visualizations must be thoroughly evaluated and the evaluation process as well as the results must be made available. Testing and evaluation of visualization software is not a trivial problem. Several methods used in testing other software are helpful, but these methods are (apparently) often not used. When they are used, the description and results are generally not available to the end user. Additional evaluation methods specific to visualization must also be developed. We present several useful approaches to evaluation, ranging from numerical analysis of mathematical portions of algorithms to measurement of human performance while using visualization systems. Along with this brief survey, we present arguments for the importance of evaluations and discussions of appropriate use of some methods.

Socio-Technical Deliberation about Free and Open Source Software: Accounting for the Status of Artifacts in Public Life

ERIC Educational Resources Information Center

Benoit-Barne, Chantal

2007-01-01

This essay investigates the rhetorical practices of socio-technical deliberation about free and open source (F/OS) software, providing support for the idea that a public sphere is a socio-technical ensemble that is discursive and fluid, yet tangible and organized because it is enacted by both humans and non-humans. In keeping with the empirical…

Software Engineering Improvement Activities/Plan

NASA Technical Reports Server (NTRS)

2003-01-01

bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14). Work accomplishments included development, evaluation, and enhancement of a software cost model, performing literature search and evaluation of software tools available for code analysis and requirements analysis, and participating in other relevant software engineering activities. Monthly reports were submitted. This support was provided to the Flight Software Group/ED 1 4 in accomplishing the software engineering improvement engineering activities of the Marshall Space Flight Center (MSFC) Software Engineering Improvement Plan.

Microcomputers: Software Evaluation. Evaluation Guides. Guide Number 17.

ERIC Educational Resources Information Center

Gray, Peter J.

This guide discusses three critical steps in selecting microcomputer software and hardware: setting the context, software evaluation, and managing microcomputer use. Specific topics addressed include: (1) conducting an informal task analysis to determine how the potential user's time is spent; (2) identifying tasks amenable to computerization and…

Modular Rocket Engine Control Software (MRECS)

NASA Technical Reports Server (NTRS)

Tarrant, C.; Crook, J.

1998-01-01

The Modular Rocket Engine Control Software (MRECS) Program is a technology demonstration effort designed to advance the state-of-the-art in launch vehicle propulsion systems. Its emphasis is on developing and demonstrating a modular software architecture for advanced engine control systems that will result in lower software maintenance (operations) costs. It effectively accommodates software requirement changes that occur due to hardware technology upgrades and engine development testing. Ground rules directed by MSFC were to optimize modularity and implement the software in the Ada programming language. MRECS system software and the software development environment utilize Commercial-Off-the-Shelf (COTS) products. This paper presents the objectives, benefits, and status of the program. The software architecture, design, and development environment are described. MRECS tasks are defined and timing relationships given. Major accomplishments are listed. MRECS offers benefits to a wide variety of advanced technology programs in the areas of modular software architecture, reuse software, and reduced software reverification time related to software changes. MRECS was recently modified to support a Space Shuttle Main Engine (SSME) hot-fire test. Cold Flow and Flight Readiness Testing were completed before the test was cancelled. Currently, the program is focused on supporting NASA MSFC in accomplishing development testing of the Fastrac Engine, part of NASA's Low Cost Technologies (LCT) Program. MRECS will be used for all engine development testing.

Remote observing capability with Subaru Telescope

NASA Astrophysics Data System (ADS)

Kosugi, George; Sasaki, Toshiyuki; Yagi, Masafumi; Ogasawara, Ryusuke; Mizumoto, Yoshihiko; Noumaru, Junichi; Kawai, Jun A.; Koura, Norikazu; Kusumoto, Toyoaki; Yamamoto, Tadahiro; Watanabe, Noboru; Ukawa, Kentaro

2004-09-01

We've implemented remote observing function to Subaru telescope Observation Software system (SOSs). Subaru telescope has three observing-sites, i.e., a telescope local-site and two remote observing-sites, Hilo base facility in Hawaii and Mitaka NAOJ headquarter in Japan. Our remote observing system is designed to allow operations not only from one of three observing-sites, but also from more than two sites concurrently or simultaneously. Considering allowance for delay in observing operations and a bandwidth of the network between the telescope-site and the remote observing-sites, three types of interfaces (protocols) have been implemented. In the remote observing mode, we use socket interface for the command and the status communication, vnc for ready-made applications and pop-up windows, and ftp for the actual data transfer. All images taken at the telescope-site are transferred to both of two remote observing-sites immediately after the acquisition to enable the observers' evaluation of the data. We present the current status of remote observations with Subaru telescope.

The Educational Software Design and Evaluation for K-8: Oral and Dental Health Software

ERIC Educational Resources Information Center

Kabakci, Isil; Birinci, Gurkay; Izmirli, Serkan

2007-01-01

The aim of this study is to inform about the development of the software "Oral and Dental Health" that will supplement the course of Science and Technology for K8 students in the primary school curriculum and to carry out an evaluation study of the software. This software has been prepared for educational purposes. In relation to the…

Asymmetric Information in Iranian’s Health Insurance Market: Testing of Adverse Selection and Moral Hazard

PubMed Central

Lotfi, Farhad; Gorji, Hassan Abolghasem; Mahdavi, Ghadir; Hadian, Mohammad

2015-01-01

Background: Asymmetric information is one of the most important issues in insurance market which occurred due to inherent characteristics of one of the agents involved in insurance contracts; hence its management requires designing appropriate policies. This phenomenon can lead to the failure of insurance market via its two consequences, namely, adverse selection and moral hazard. Objective: This study was aimed to evaluate the status of asymmetric information in Iran’s health insurance market with respect to the demand for outpatient services. Materials/sPatients and Methods: This research is a cross sectional study conducted on households living in Iran. The data of the research was extracted from the information on household’s budget survey collected by the Statistical Center of Iran in 2012. In this study, the Generalized Method of Moment model was used and the status of adverse selection and moral hazard was evaluated through calculating the latent health status of individuals in each insurance category. To analyze the data, Excel, Eviews and stata11 software were used. Results: The estimation of parameters of the utility function of the demand for outpatient services (visit, medicine, and Para-clinical services) showed that households were more risk averse in the use of outpatient care than other goods and services. After estimating the health status of households based on their health insurance categories, the results showed that rural-insured people had the best health status and people with supplementary insurance had the worst health status. In addition, the comparison of the conditional distribution of latent health status approved the phenomenon of adverse selection in all insurance groups, with the exception of rural insurance. Moreover, calculation of the elasticity of medical expenses to reimbursement rate confirmed the existence of moral hazard phenomenon. Conclusions: Due to the existence of the phenomena of adverse selection and moral hazard in most of health insurances categories, policymakers need to adjust contracts so that to reduce these phenomena. Given the importance of financing, the presence of such problems can lead to less coverage of health insurance provided by insurers, loss of contracts with health care institutions and service providers, and lower quality of health services. PMID:26153155

A Characteristics Approach to the Evaluation of Economics Software Packages.

ERIC Educational Resources Information Center

Lumsden, Keith; Scott, Alex

1988-01-01

Utilizes Bloom's Taxonomy to identify elements of teacher and student interest. Depicts the way in which these interests are developed into characteristics for use in analytically evaluating software. Illustrates the use of this evaluating technique by appraising the much used software package "Running the British Economy." (KO)

Learning Content and Software Evaluation and Personalisation Problems

ERIC Educational Resources Information Center

Kurilovas, Eugenijus; Serikoviene, Silvija

2010-01-01

The paper aims to analyse several scientific approaches how to evaluate, implement or choose learning content and software suitable for personalised users/learners needs. Learning objects metadata customisation method as well as the Method of multiple criteria evaluation and optimisation of learning software represented by the experts' additive…

Evaluation of Oral Health Status among 5-15-Year-old School Children in Shimoga City, Karnataka, India: A Cross-sectional Study

PubMed Central

Shashibhushan, Kukkalli Kamalaksharappa; Pradeep, Muttugadur Chandrappa; Babaji, Prashant; Reddy, Vundela Rajashekar

2017-01-01

Introduction Oral health is an integral part of general health. Dental problems can be avoided if identified at an early stage. There is no data on oral health status of school going children in Karnataka state’s Shimoga city. Aim To evaluate oral health status of school going children among 5-15-year-old in Shimoga city. Materials and Methods A cross-sectional study was conducted among 1458 government and private school children aged 5-6, 9-10 and 14-15 years. Dental caries (DMFT and deft Index), oral hygiene status (OHI-S Index) and dental fluorosis (Dean’s Fluorosis Index) according to WHO diagnostic criteria (1997) were assessed. Data was evaluated using ANOVA and t-test by SPSS (IBM statistical software version 21.0.) at a level of 5% significance. Results The deft among 5-6-year-old children was 3.36±3.511, deft and DMFT among 9-10-year-old was 2.55±2.497 and 0.45±0.996 respectively and DMFT among 14-15-year-old was 1.34±1.832. The caries prevalence among 5-6-year-old was 68.8%, 9-10-year-old was 77.2% and 14-15-year-old was 48.9% and overall prevalence of dental caries was 65.3% which was statistically significant. Among 9-10-year-old oral hygiene was good in 85.4%, fair in 13.5% and poor in 1% of school children and among 14-15-year-old oral hygiene was good in 77.4%, fair in 22.2% and poor in 0.4%. Overall 81.7% of children had good oral hygiene. The prevalence of dental fluorosis was 14.5%. Conclusion The children from government school were found to be less caries free than the private school children, but the difference was not significant. Oral hygiene status is found to be good among both the private and government school children. So the dental awareness is required among children of government school. PMID:28893041

A new development on measurement and control software of SANS BATAN spectrometer (SMARTer) in Serpong, Indonesia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bharoto,; Suparno, Nadi; Putra, Edy Giri Rachman

In 2005, the main computer for data acquisition and control system of Small-angle Neutron Scattering (SANS) BATAN Spectrometer (SMARTer) was replaced since it halted to operate the spectrometer. According to this replacement, the new software for data acquisition and control system has been developed in-house. Visual Basic programming language is used in developing the software. In the last two years, many developments have been made both in the hardware and also the software to conduct the experiment is more effective and efficient. Lately, the previous motor controller card (ISA Card) was replaced with the programmable motor controller card (PCI Card)more » for driving one motor of position sensitive detector (PSD), eight motors of four collimators, and six motors of six pinhole discs. This new control system software makes all motors can be moved simultaneously, then it reduces significantly the consuming time of setting up the instrument before running the experiment. Along with that development, the new data acquisition software under MS Windows operating system is also developed to drive a beam stopper in X-Y directions as well as to read the equipment status such as position of the collimators and PSD, to acquire neutron counts on monitor and PSD detectors, and also to manage 12 samples position automatically. A timer object which is set in one second to read the equipment status via serial port of the computer (RS232C), and general purpose interface board (GPIB) for reading the total counts of each pixel of the PSD from histogram memory was used in this new software. The experiment result displayed in real time on the main window, and the data is saved in the special format for further data reduction and analysis. The new software has been implemented and performed for experiment using a preset count or preset time mode for absolute scattering intensity method.« less

A new development on measurement and control software of SANS BATAN spectrometer (SMARTer) in Serpong, Indonesia

NASA Astrophysics Data System (ADS)

Bharoto, Suparno, Nadi; Putra, Edy Giri Rachman

2015-04-01

In 2005, the main computer for data acquisition and control system of Small-angle Neutron Scattering (SANS) BATAN Spectrometer (SMARTer) was replaced since it halted to operate the spectrometer. According to this replacement, the new software for data acquisition and control system has been developed in-house. Visual Basic programming language is used in developing the software. In the last two years, many developments have been made both in the hardware and also the software to conduct the experiment is more effective and efficient. Lately, the previous motor controller card (ISA Card) was replaced with the programmable motor controller card (PCI Card) for driving one motor of position sensitive detector (PSD), eight motors of four collimators, and six motors of six pinhole discs. This new control system software makes all motors can be moved simultaneously, then it reduces significantly the consuming time of setting up the instrument before running the experiment. Along with that development, the new data acquisition software under MS Windows operating system is also developed to drive a beam stopper in X-Y directions as well as to read the equipment status such as position of the collimators and PSD, to acquire neutron counts on monitor and PSD detectors, and also to manage 12 samples position automatically. A timer object which is set in one second to read the equipment status via serial port of the computer (RS232C), and general purpose interface board (GPIB) for reading the total counts of each pixel of the PSD from histogram memory was used in this new software. The experiment result displayed in real time on the main window, and the data is saved in the special format for further data reduction and analysis. The new software has been implemented and performed for experiment using a preset count or preset time mode for absolute scattering intensity method.

[The development and evaluation of software to verify diagnostic accuracy].

PubMed

Jensen, Rodrigo; de Moraes Lopes, Maria Helena Baena; Silveira, Paulo Sérgio Panse; Ortega, Neli Regina Siqueira

2012-02-01

This article describes the development and evaluation of software that verifies the accuracy of diagnoses made by nursing students. The software was based on a model that uses fuzzy logic concepts, including PERL, the MySQL database for Internet accessibility, and the NANDA-I 2007-2008 classification system. The software was evaluated in terms of its technical quality and usability through specific instruments. The activity proposed in the software involves four stages in which students establish the relationship values between nursing diagnoses, defining characteristics/risk factors and clinical cases. The relationship values determined by students are compared to those of specialists, generating performance scores for the students. In the evaluation, the software demonstrated satisfactory outcomes regarding the technical quality and, according to the students, helped in their learning and may become an educational tool to teach the process of nursing diagnosis.

Implementing Educational Software and Evaluating Its Academic Effectiveness: Part I.

ERIC Educational Resources Information Center

Jolicoeur, Karen; Berger, Dale E.

1988-01-01

This basic plan for implementing educational software in the classroom incorporates a research design for evaluating its effectiveness. A study of fifth grade classrooms using game and tutorial software for spelling and fractions is used as an example. Topics discussed include software selection, selecting groups of comparable ability, and use of…

MicroSIFT Courseware Evaluations (199-222). Set 10. Including Subject and Title Indexes Covering Sets 1-10.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This document consists of 24 microcomputer software package evaluations prepared by the MicroSIFT (Microcomputer Software and Information for Teachers) Clearinghouse at the Northwest Regional Educational Laboratory. Each software review lists source, cost, ability level, subject, topic, medium of transfer, required hardware, required software,…

Iodine nutritional status in Brazil: a meta-analysis of all studies performed in the country pinpoints to an insufficient evaluation and heterogeneity.

PubMed

Campos, Renata de Oliveira; Barreto, Iasmin dos Santos; Maia, Lorena Rejane de Jesus; Rebouças, Sara Cristina Lima; Cerqueira, Taíse Lima de Oliveira; Oliveira, Clotilde Assis; Santos, Carlos Antônio de Souza Teles; Mendes, Carlos Maurício Cardeal; Teixeira, Leonardo Sena Gomes; Ramos, Helton Estrela

2015-02-01

Iodine deficiency disorder (IDD) is the result of an inadequate dietary intake of iodine, which physiological consequences are endemic goiter and thyroid dysfunction. The objective of this study was to a analyze studies that assessed the status of Brazil's population iodine nutrition and IDD prevalence. Systematic review using PRISMA statement. Electronic database: PubMed, Medline, SciELO and Lilacs. Quality of studies: Newcastle-Ottawa Scale. Meta-analysis was carried out with R Core Team Statistical Software, version 3.1.0 (2014). The summary measure (WMD) and its confidence interval (CI) of 95% were calculated. The "Funnel plot" graph assessed publication bias and heterogeneity. Seventeen papers were eligible: pregnant women (2), school children (9), adults/elderly (4) and preschool children/infants (2). Geographic distribution: North (1), Northeast (1), Midwest (2), Southeast (13), South (3). Twenty-three thousand two hundred seventy-two subjects were evaluated between 1997 and 2013 and all have use urinary iodine (UI) measurement. However, only 7 studies could be included in meta-analysis, all from Southeast region. The overall prevalence of IDD in school children in southeast region was 15.3% (95% CI, 13-35%), however this data had an important heterogeneity, expressed by the I2 Statistic of 99.5%. Only few studies have been performed and enrolled populations from south/southeast region of Brazil. The actual IDD prevalence analysis is complex because it was detected bias due influence of individual studies and very high heterogeneity. IDD might still be high in some areas but this remained unknown even after this meta-analysis evaluation. The generation of a national program for analysis of iodine status in all regions is urgently required.

MISBR

Atmospheric Science Data Center

2016-08-22

MISBR MISR Browse Data: Color browse image of the Ellipsoid product for each camera resampled to 2.2 km resolution. ... Tool:  Order Data Readme Files:  Processing Status Production Report Read Software ...

MIL3DAE

Atmospheric Science Data Center

2018-04-19

... Earthdata Search   Parameters:  Average aerosol optical depth Order Data:  MISR Order Tool:  Order ... Readme Files:  Processing Status:  Aerosol/Land Production Report:  Daily Read Software ...

Open Source and Design Thinking at NASA: A Vision for Future Software

NASA Technical Reports Server (NTRS)

Trimble, Jay

2017-01-01

NASA Mission Control Software for the Visualization of data has historically been closed, accessible only to small groups of flight controllers, often bound to a specific mission discipline such as flight dynamics, health and status or mission planning. Open Mission Control Technologies (MCT) provides new capability for NASA mission controllers and, by being fully open source, opens up NASA software for the visualization of mission data to broader communities inside and outside of NASA. Open MCT is the product of a design thinking process within NASA, using participatory design and design sprints to build a product that serves users.

Cargo Movement Operations System (CMOS). Draft Software Programmer’s Manual

DTIC Science & Technology

1990-07-12

NO ( ] COMMENT DISPOSITION: ACCEPT [ ] REJECT [ ] COMMENT STATUS: OPEN [ ] CLOSED [ ] Cmnt Page Paragraph No. No. Number Comment 1. 3-4 3.2 Change...reader in locating pertinent information. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO ( ] COMMENT DISPOSITION: COMMENT...NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN ( ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SPM-0006 PROGRAM

Cargo Movement Operations System (CMOS). Updated Draft Software User’s Manual. Increment I

DTIC Science & Technology

1991-03-22

ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ...shall be combined. Therefore, the menu structure should reflect that change. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO ... COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SUM-0002 PROGRAM OFFICE CONTROL NUMBER: DATA ITEM DISCREPANCY

Cargo Movement Operations System (CMOS). Software Design Document

DTIC Science & Technology

1990-04-29

order. RATIONALE: N/A CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: ACCEPT [ ] REJECT [ ] COMMENT...inadvertently omitted from the table. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN...YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SDDI-0005 PROGRAM OFFICE CONTROL NUMBER: DATA ITEM

[Prenatal risk calculation: comparison between Fast Screen pre I plus software and ViewPoint software. Evaluation of the risk calculation algorithms].

PubMed

Morin, Jean-François; Botton, Eléonore; Jacquemard, François; Richard-Gireme, Anouk

2013-01-01

The Fetal medicine foundation (FMF) has developed a new algorithm called Prenatal Risk Calculation (PRC) to evaluate Down syndrome screening based on free hCGβ, PAPP-A and nuchal translucency. The peculiarity of this algorithm is to use the degree of extremeness (DoE) instead of the multiple of the median (MoM). The biologists measuring maternal seric markers on Kryptor™ machines (Thermo Fisher Scientific) use Fast Screen pre I plus software for the prenatal risk calculation. This software integrates the PRC algorithm. Our study evaluates the data of 2.092 patient files of which 19 show a fœtal abnormality. These files have been first evaluated with the ViewPoint software based on MoM. The link between DoE and MoM has been analyzed and the different calculated risks compared. The study shows that Fast Screen pre I plus software gives the same risk results as ViewPoint software, but yields significantly fewer false positive results.

Three-dimensional analysis of third molar development to estimate age of majority.

PubMed

Márquez-Ruiz, Ana Belén; Treviño-Tijerina, María Concepción; González-Herrera, Lucas; Sánchez, Belén; González-Ramírez, Amanda Rocío; Valenzuela, Aurora

2017-09-01

Third molars are one of the few biological markers available for age estimation in undocumented juveniles close the legal age of majority, assuming an age of 18years as the most frequent legal demarcation between child and adult status. To obtain more accurate visualization and evaluation of third molar mineralization patterns from computed tomography images, a new software application, DentaVol©, was developed. Third molar mineralization according to qualitative (Demirjian's maturational stage) and quantitative parameters (third molar volume) of dental development was assessed in multi-slice helical computed tomography images of both maxillary arches displayed by DentaVol© from 135 individuals (62 females and 73 males) aged between 14 and 23years. Intra- and inter-observer agreement values were remarkably high for both evaluation procedures and for all third molars. A linear correlation between third molar mineralization and chronological age was found, with third molar maturity occurring earlier in males than in females. Assessment of dental development with both procedures, by using DentaVol© software, can be considered a good indicator of age of majority (18years or older) in all third molars. Our results indicated that virtual computed tomography imaging can be considered a valid alternative to orthopantomography for evaluations of third molar mineralization, and therefore a complementary tool for determining the age of majority. Copyright © 2017 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

European Space Software Repository ESSR

NASA Astrophysics Data System (ADS)

Livschitz, Jakob; Blommestijn, Robert

2016-08-01

The paper and presentation will present the status of the ESSR (European Space Software Repository), see [1]. It will describe the development phases, outline the web portal functionality and explain the process steps behind. Not only the front-end but also the back-end will be discussed.The ESSR web portal went live ESA internal on May 15th, 2015 and live world-wide September 19th, 2015. Currently the ESSR is in operations.

Parallels in Computer-Aided Design Framework and Software Development Environment Efforts.

DTIC Science & Technology

1992-05-01

de - sign kits, and tool and design management frameworks. Also, books about software engineer- ing environments [Long 91] and electronic design...tool integration [Zarrella 90], and agreement upon a universal de - sign automation framework, such as the CAD Framework Initiative (CFI) [Malasky 91...ments: identification, control, status accounting, and audit and review. The paper by Dart ex- tracts 15 CM concepts from existing SDEs and tools

A software package for the data-independent management of multidimensional data

NASA Technical Reports Server (NTRS)

Treinish, Lloyd A.; Gough, Michel L.

1987-01-01

The Common Data Format (CDF), a structure which provides true data independence for applications software and has been developed at the National Space Science Data Center, is discussed. The background to the CDF is reviewed, and the CDF is described. The conceptual organization of the CDF is discussed, and a sample CDF structure is shown and described. The implementation of CDF, its status, and its applications are examined.

Advanced Extravehicular Mobility Unit Informatics Software Design

NASA Technical Reports Server (NTRS)

Wright, Theodore

2014-01-01

This is a description of the software design for the 2013 edition of the Advanced Extravehicular Mobility Unit (AEMU) Informatics computer assembly. The Informatics system is an optional part of the space suit assembly. It adds a graphical interface for displaying suit status, timelines, procedures, and caution and warning information. In the future it will display maps with GPS position data, and video and still images captured by the astronaut.

Specialized data analysis for the Space Shuttle Main Engine and diagnostic evaluation of advanced propulsion system components

NASA Technical Reports Server (NTRS)

1993-01-01

The Marshall Space Flight Center is responsible for the development and management of advanced launch vehicle propulsion systems, including the Space Shuttle Main Engine (SSME), which is presently operational, and the Space Transportation Main Engine (STME) under development. The SSME's provide high performance within stringent constraints on size, weight, and reliability. Based on operational experience, continuous design improvement is in progress to enhance system durability and reliability. Specialized data analysis and interpretation is required in support of SSME and advanced propulsion system diagnostic evaluations. Comprehensive evaluation of the dynamic measurements obtained from test and flight operations is necessary to provide timely assessment of the vibrational characteristics indicating the operational status of turbomachinery and other critical engine components. Efficient performance of this effort is critical due to the significant impact of dynamic evaluation results on ground test and launch schedules, and requires direct familiarity with SSME and derivative systems, test data acquisition, and diagnostic software. Detailed analysis and evaluation of dynamic measurements obtained during SSME and advanced system ground test and flight operations was performed including analytical/statistical assessment of component dynamic behavior, and the development and implementation of analytical/statistical models to efficiently define nominal component dynamic characteristics, detect anomalous behavior, and assess machinery operational condition. In addition, the SSME and J-2 data will be applied to develop vibroacoustic environments for advanced propulsion system components, as required. This study will provide timely assessment of engine component operational status, identify probable causes of malfunction, and indicate feasible engineering solutions. This contract will be performed through accomplishment of negotiated task orders.

Free and open-source software application for the evaluation of coronary computed tomography angiography images.

PubMed

Hadlich, Marcelo Souza; Oliveira, Gláucia Maria Moraes; Feijóo, Raúl A; Azevedo, Clerio F; Tura, Bernardo Rangel; Ziemer, Paulo Gustavo Portela; Blanco, Pablo Javier; Pina, Gustavo; Meira, Márcio; Souza e Silva, Nelson Albuquerque de

2012-10-01

The standardization of images used in Medicine in 1993 was performed using the DICOM (Digital Imaging and Communications in Medicine) standard. Several tests use this standard and it is increasingly necessary to design software applications capable of handling this type of image; however, these software applications are not usually free and open-source, and this fact hinders their adjustment to most diverse interests. To develop and validate a free and open-source software application capable of handling DICOM coronary computed tomography angiography images. We developed and tested the ImageLab software in the evaluation of 100 tests randomly selected from a database. We carried out 600 tests divided between two observers using ImageLab and another software sold with Philips Brilliance computed tomography appliances in the evaluation of coronary lesions and plaques around the left main coronary artery (LMCA) and the anterior descending artery (ADA). To evaluate intraobserver, interobserver and intersoftware agreements, we used simple and kappa statistics agreements. The agreements observed between software applications were generally classified as substantial or almost perfect in most comparisons. The ImageLab software agreed with the Philips software in the evaluation of coronary computed tomography angiography tests, especially in patients without lesions, with lesions < 50% in the LMCA and < 70% in the ADA. The agreement for lesions > 70% in the ADA was lower, but this is also observed when the anatomical reference standard is used.

Educational Software Evaluation Form for Teachers

ERIC Educational Resources Information Center

Kara, Yilmaz

2007-01-01

The purpose of the study was to develop an educational software evaluation form to provide an evaluation and selection instrument of educational software that met the requirements of some balance between mechanics, content and pedagogy that is user friendly. The subjects for the study comprised a group of 32 biology teachers working in secondary…

MicroSIFT Courseware Evaluations (169-198). Set 9. Including Subject and Title Indexes Covering Sets 1-9.

ERIC Educational Resources Information Center

Weaver, Dave, Ed.

This document consists of 30 microcomputer software package evaluations prepared for the MicroSIFT (Microcomputer Software and Information for Teachers) Clearinghouse at the Northwest Regional Educational Laboratory (NWREL). The concise, single-sheet resume describing and evaluating each software package includes source, cost, ability level,…

Checklists for the Evaluation of Educational Software: Critical Review and Prospects.

ERIC Educational Resources Information Center

Tergan, Sigmar-Olaf

1998-01-01

Reviews strengths and weaknesses of check lists for the evaluation of computer software and outlines consequences for their practical application. Suggests an approach based on an instructional design model and a comprehensive framework to cope with problems of validity and predictive power of software evaluation. Discusses prospects of the…

Extensive Evaluation of Using a Game Project in a Software Architecture Course

ERIC Educational Resources Information Center

Wang, Alf Inge

2011-01-01

This article describes an extensive evaluation of introducing a game project to a software architecture course. In this project, university students have to construct and design a type of software architecture, evaluate the architecture, implement an application based on the architecture, and test this implementation. In previous years, the domain…

Web Time-Management Tool

NASA Technical Reports Server (NTRS)

2000-01-01

Oak Grove Reactor, developed by Oak Grove Systems, is a new software program that allows users to integrate workflow processes. It can be used with portable communication devices. The software can join e-mail, calendar/scheduling and legacy applications into one interactive system via the web. Priority tasks and due dates are organized and highlighted to keep the user up to date with developments. Reactor works with existing software and few new skills are needed to use it. Using a web browser, a user can can work on something while other users can work on the same procedure or view its status while it is being worked on at another site. The software was developed by the Jet Propulsion Lab and originally put to use at Johnson Space Center.

Finding the Right Educational Software for Your Child.

ERIC Educational Resources Information Center

Moore, Jack

1990-01-01

Ideas are presented for identifying, evaluating, and selecting instructional software for children with special needs. The article notes several library research tools as sources of information and lists specific questions to consider when evaluating software. (JDD)

Italian medical students quality of life: years 2005-2015.

PubMed

Messina, G; Quercioli, C; Troiano, G; Russo, C; Barbini3, E; Nisticò, F; Nante, N

2016-01-01

Quality of Life (QoL) is a concept used to indicate the general wellness of persons or societies. University students report a low quality of life and a worse perception of their health status, because of a situation of greater discomfort in which they live during the course of the study, especially in faculties with an important emotional burden, such as medical schools. The aim of the study was to evaluate the perceived health status of first year medical students. We conducted a cross sectional study in the time span 2005-2015, administering the questionnaire Short Form 36 (SF-36) to first-year students of the School of Medicine of the University of Siena, Italy. In addition to demographic information such as gender and the age we investigated the region of residence, marital status, employment status, and smoking habits; height and weight were required to calculate the body mass index (BMI) to evaluate a possible physical discomfort connected with the perception of health status. The data from the questionnaires were organized and processed by software Stata® SE, version 12.1. 1,104 questionnaires were collected. Medical students reported lower SF-36 scores, compared to the Italian population of the same age. Female gender and smoking habits influence negatively the score of several scales. Body Mass Index is positively correlated with the Physical Activity, while Age is negatively correlated with Social Activities. The perceived quality of life of the Italian medical students is lower when compared to the general population. This confirms that the condition of student implies additional problems, as other studies reports. It would be better to improve it, developing students' resilience. It would be interesting to extend this research to students of other years, from other faculties and other locations, to gain a broader view about the QoL of the Italian students.

NASA software specification and evaluation system: Software verification/validation techniques

NASA Technical Reports Server (NTRS)

1977-01-01

NASA software requirement specifications were used in the development of a system for validating and verifying computer programs. The software specification and evaluation system (SSES) provides for the effective and efficient specification, implementation, and testing of computer software programs. The system as implemented will produce structured FORTRAN or ANSI FORTRAN programs, but the principles upon which SSES is designed allow it to be easily adapted to other high order languages.

Evaluation of the fishery status for King Soldier Bream Argyrops spinifer in Pakistan using the software CEDA and ASPIC

NASA Astrophysics Data System (ADS)

Memon, Aamir Mahmood; Liu, Qun; Memon, Khadim Hussain; Baloch, Wazir Ali; Memon, Asfandyar; Baset, Abdul

2015-07-01

Catch and effort data were analyzed to estimate the maximum sustainable yield (MSY) of King Soldier Bream, Argyrops spinifer (Forsskål, 1775, Family: Sparidae), and to evaluate the present status of the fish stocks exploited in Pakistani waters. The catch and effort data for the 25-years period 1985-2009 were analyzed using two computer software packages, CEDA (catch and effort data analysis) and ASPIC (a surplus production model incorporating covariates). The maximum catch of 3 458 t was observed in 1988 and the minimum catch of 1 324 t in 2005, while the average annual catch of A. spinifer over the 25 years was 2 500 t. The surplus production models of Fox, Schaefer, and Pella Tomlinson under three error assumptions of normal, log-normal and gamma are in the CEDA package and the two surplus models of Fox and logistic are in the ASPIC package. In CEDA, the MSY was estimated by applying the initial proportion (IP) of 0.8, because the starting catch was approximately 80% of the maximum catch. Except for gamma, because gamma showed maximization failures, the estimated results of MSY using CEDA with the Fox surplus production model and two error assumptions, were 1 692.08 t ( R 2=0.572) and 1 694.09 t ( R 2=0.606), respectively, and from the Schaefer and the Pella Tomlinson models with two error assumptions were 2 390.95 t ( R 2=0.563), and 2 380.06 t ( R 2=0.605), respectively. The MSY estimated by the Fox model was conservatively compared to the Schaefer and Pella Tomlinson models. The MSY values from Schaefer and Pella Tomlinson models were the same. The computed values of MSY using the ASPIC computer software program with the two surplus production models of Fox and logistic were 1 498 t ( R 2=0.917), and 2 488 t ( R 2=0.897) respectively. The estimated values of MSY using CEDA were about 1 700-2 400 t and the values from ASPIC were 1 500-2 500 t. The estimates output by the CEDA and the ASPIC packages indicate that the stock is overfished, and needs some effective management to reduce the fishing effort of the species in Pakistani waters.

Evaluating Business Intelligence/Business Analytics Software for Use in the Information Systems Curriculum

ERIC Educational Resources Information Center

Davis, Gary Alan; Woratschek, Charles R.

2015-01-01

Business Intelligence (BI) and Business Analytics (BA) Software has been included in many Information Systems (IS) curricula. This study surveyed current and past undergraduate and graduate students to evaluate various BI/BA tools. Specifically, this study compared several software tools from two of the major software providers in the BI/BA field.…

242A Distributed Control System Year 2000 Acceptance Test Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

TEATS, M.C.

1999-08-31

This report documents acceptance test results for the 242-A Evaporator distributive control system upgrade to D/3 version 9.0-2 for year 2000 compliance. This report documents the test results obtained by acceptance testing as directed by procedure HNF-2695. This verification procedure will document the initial testing and evaluation of the potential 242-A Distributed Control System (DCS) operating difficulties across the year 2000 boundary and the calendar adjustments needed for the leap year. Baseline system performance data will be recorded using current, as-is operating system software. Data will also be collected for operating system software that has been modified to correct yearmore » 2000 problems. This verification procedure is intended to be generic such that it may be performed on any D/3{trademark} (GSE Process Solutions, Inc.) distributed control system that runs with the VMSTM (Digital Equipment Corporation) operating system. This test may be run on simulation or production systems depending upon facility status. On production systems, DCS outages will occur nine times throughout performance of the test. These outages are expected to last about 10 minutes each.« less

CÆLIS: software for assimilation, management and processing data of an atmospheric measurement network

NASA Astrophysics Data System (ADS)

Fuertes, David; Toledano, Carlos; González, Ramiro; Berjón, Alberto; Torres, Benjamín; Cachorro, Victoria E.; de Frutos, Ángel M.

2018-02-01

Given the importance of the atmospheric aerosol, the number of instruments and measurement networks which focus on its characterization are growing. Many challenges are derived from standardization of protocols, monitoring of the instrument status to evaluate the network data quality and manipulation and distribution of large volume of data (raw and processed). CÆLIS is a software system which aims at simplifying the management of a network, providing tools by monitoring the instruments, processing the data in real time and offering the scientific community a new tool to work with the data. Since 2008 CÆLIS has been successfully applied to the photometer calibration facility managed by the University of Valladolid, Spain, in the framework of Aerosol Robotic Network (AERONET). Thanks to the use of advanced tools, this facility has been able to analyze a growing number of stations and data in real time, which greatly benefits the network management and data quality control. The present work describes the system architecture of CÆLIS and some examples of applications and data processing.

A Software Developer’s Guide to Informal Evaluation of Visual Analytics Environments Using VAST Challenge Information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Kristin A.; Scholtz, Jean; Whiting, Mark A.

The VAST Challenge has been a popular venue for academic and industry participants for over ten years. Many participants comment that the majority of their time in preparing VAST Challenge entries is discovering elements in their software environments that need to be redesigned in order to solve the given task. Fortunately, there is no need to wait until the VAST Challenge is announced to test out software systems. The Visual Analytics Benchmark Repository contains all past VAST Challenge tasks, data, solutions and submissions. This paper details the various types of evaluations that may be conducted using the Repository information. Inmore » this paper we describe how developers can do informal evaluations of various aspects of their visual analytics environments using VAST Challenge information. Aspects that can be evaluated include the appropriateness of the software for various tasks, the various data types and formats that can be accommodated, the effectiveness and efficiency of the process supported by the software, and the intuitiveness of the visualizations and interactions. Researchers can compare their visualizations and interactions to those submitted to determine novelty. In addition, the paper provides pointers to various guidelines that software teams can use to evaluate the usability of their software. While these evaluations are not a replacement for formal evaluation methods, this information can be extremely useful during the development of visual analytics environments.« less

Evaluating software development by analysis of changes: The data from the software engineering laboratory

NASA Technical Reports Server (NTRS)

1982-01-01

An effective data collection methodology for evaluating software development methodologies was applied to four different software development projects. Goals of the data collection included characterizing changes and errors, characterizing projects and programmers, identifying effective error detection and correction techniques, and investigating ripple effects. The data collected consisted of changes (including error corrections) made to the software after code was written and baselined, but before testing began. Data collection and validation were concurrent with software development. Changes reported were verified by interviews with programmers.

Applying a Framework to Evaluate Assignment Marking Software: A Case Study on Lightwork

ERIC Educational Resources Information Center

Heinrich, Eva; Milne, John

2012-01-01

This article presents the findings of a qualitative evaluation on the effect of a specialised software tool on the efficiency and quality of assignment marking. The software, Lightwork, combines with the Moodle learning management system and provides support through marking rubrics and marker allocations. To enable the evaluation a framework has…

Software dependability in the Tandem GUARDIAN system

NASA Technical Reports Server (NTRS)

Lee, Inhwan; Iyer, Ravishankar K.

1995-01-01

Based on extensive field failure data for Tandem's GUARDIAN operating system this paper discusses evaluation of the dependability of operational software. Software faults considered are major defects that result in processor failures and invoke backup processes to take over. The paper categorizes the underlying causes of software failures and evaluates the effectiveness of the process pair technique in tolerating software faults. A model to describe the impact of software faults on the reliability of an overall system is proposed. The model is used to evaluate the significance of key factors that determine software dependability and to identify areas for improvement. An analysis of the data shows that about 77% of processor failures that are initially considered due to software are confirmed as software problems. The analysis shows that the use of process pairs to provide checkpointing and restart (originally intended for tolerating hardware faults) allows the system to tolerate about 75% of reported software faults that result in processor failures. The loose coupling between processors, which results in the backup execution (the processor state and the sequence of events) being different from the original execution, is a major reason for the measured software fault tolerance. Over two-thirds (72%) of measured software failures are recurrences of previously reported faults. Modeling, based on the data, shows that, in addition to reducing the number of software faults, software dependability can be enhanced by reducing the recurrence rate.

Sensor Data Quality and Angular Rate Down-Selection Algorithms on SLS EM-1

NASA Technical Reports Server (NTRS)

Park, Thomas; Smith, Austin; Oliver, T. Emerson

2018-01-01

The NASA Space Launch System Block 1 launch vehicle is equipped with an Inertial Navigation System (INS) and multiple Rate Gyro Assemblies (RGA) that are used in the Guidance, Navigation, and Control (GN&C) algorithms. The INS provides the inertial position, velocity, and attitude of the vehicle along with both angular rate and specific force measurements. Additionally, multiple sets of co-located rate gyros supply angular rate data. The collection of angular rate data, taken along the launch vehicle, is used to separate out vehicle motion from flexible body dynamics. Since the system architecture uses redundant sensors, the capability was developed to evaluate the health (or validity) of the independent measurements. A suite of Sensor Data Quality (SDQ) algorithms is responsible for assessing the angular rate data from the redundant sensors. When failures are detected, SDQ will take the appropriate action and disqualify or remove faulted sensors from forward processing. Additionally, the SDQ algorithms contain logic for down-selecting the angular rate data used by the GNC software from the set of healthy measurements. This paper explores the trades and analyses that were performed in selecting a set of robust fault-detection algorithms included in the GN&C flight software. These trades included both an assessment of hardware-provided health and status data as well as an evaluation of different algorithms based on time-to-detection, type of failures detected, and probability of detecting false positives. We then provide an overview of the algorithms used for both fault-detection and measurement down selection. We next discuss the role of trajectory design, flexible-body models, and vehicle response to off-nominal conditions in setting the detection thresholds. Lastly, we present lessons learned from software integration and hardware-in-the-loop testing.

Radiation Hardening by Software Techniques on FPGAs: Flight Experiment Evaluation and Results

NASA Technical Reports Server (NTRS)

Schmidt, Andrew G.; Flatley, Thomas

2017-01-01

We present our work on implementing Radiation Hardening by Software (RHBSW) techniques on the Xilinx Virtex5 FPGAs PowerPC 440 processors on the SpaceCube 2.0 platform. The techniques have been matured and tested through simulation modeling, fault emulation, laser fault injection and now in a flight experiment, as part of the Space Test Program- Houston 4-ISS SpaceCube Experiment 2.0 (STP-H4-ISE 2.0). This work leverages concepts such as heartbeat monitoring, control flow assertions, and checkpointing, commonly used in the High Performance Computing industry, and adapts them for use in remote sensing embedded systems. These techniques are extremely low overhead (typically <1.3%), enabling a 3.3x gain in processing performance as compared to the equivalent traditionally radiation hardened processor. The recently concluded STP-H4 flight experiment was an opportunity to upgrade the RHBSW techniques for the Virtex5 FPGA and demonstrate them on-board the ISS to achieve TRL 7. This work details the implementation of the RHBSW techniques, that were previously developed for the Virtex4-based SpaceCube 1.0 platform, on the Virtex5-based SpaceCube 2.0 flight platform. The evaluation spans the development and integration with flight software, remotely uploading the new experiment to the ISS SpaceCube 2.0 platform, and conducting the experiment continuously for 16 days before the platform was decommissioned. The experiment was conducted on two PowerPCs embedded within the Virtex5 FPGA devices and the experiment collected 19,400 checkpoints, processed 253,482 status messages, and incurred 0 faults. These results are highly encouraging and future work is looking into longer duration testing as part of the STP-H5 flight experiment.

FY17 Status Report on the Computing Systems for the Yucca Mountain Project TSPA-LA Models.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Appel, Gordon John; Hadgu, Teklu; Appel, Gordon John

Sandia National Laboratories (SNL) continued evaluation of total system performance assessment (TSPA) computing systems for the previously considered Yucca Mountain Project (YMP). This was done to maintain the operational readiness of the computing infrastructure (computer hardware and software) and knowledge capability for total system performance assessment (TSPA) type analysis, as directed by the National Nuclear Security Administration (NNSA), DOE 2010. This work is a continuation of the ongoing readiness evaluation reported in Lee and Hadgu (2014), Hadgu et al. (2015) and Hadgu and Appel (2016). The TSPA computing hardware (CL2014) and storage system described in Hadgu et al. (2015) weremore » used for the current analysis. One floating license of GoldSim with Versions 9.60.300, 10.5, 11.1 and 12.0 was installed on the cluster head node, and its distributed processing capability was mapped on the cluster processors. Other supporting software were tested and installed to support the TSPA- type analysis on the server cluster. The current tasks included preliminary upgrade of the TSPA-LA from Version 9.60.300 to the latest version 12.0 and address DLL-related issues observed in the FY16 work. The model upgrade task successfully converted the Nominal Modeling case to GoldSim Versions 11.1/12. Conversions of the rest of the TSPA models were also attempted but program and operational difficulties precluded this. Upgrade of the remaining of the modeling cases and distributed processing tasks is expected to continue. The 2014 server cluster and supporting software systems are fully operational to support TSPA-LA type analysis.« less

Evaluating a Service-Oriented Architecture

DTIC Science & Technology

2007-09-01

See the description on page 13. SaaS Software as a service ( SaaS ) is a software delivery model where customers don’t own a copy of the application... serviceability REST Representational State Transfer RIA rich internet application RPC remote procedure call SaaS software as a service SAML Security...Evaluating a Service -Oriented Architecture Phil Bianco, Software Engineering Institute Rick Kotermanski, Summa Technologies Paulo Merson

Cargo Movement Operations System (CMOS): Revised Preliminary Software Design Document (Applications CSCI), Increment II

DTIC Science & Technology

1991-05-23

background color does not change. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO ( ] COMMENT DISPOSITION: CONMENT STATUS: OPEN...NO ( ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ) CLOSED [ ] ,$ ...collected on this worksheet and are arranged in page number order. RATIONALE: N/A CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO

Challenges to Software/Computing for Experimentation at the LHC

NASA Astrophysics Data System (ADS)

Banerjee, Sunanda

The demands of future high energy physics experiments towards software and computing have led the experiments to plan the related activities as a full-fledged project and to investigate new methodologies and languages to meet the challenges. The paths taken by the four LHC experiments ALICE, ATLAS, CMS and LHCb are coherently put together in an LHC-wide framework based on Grid technology. The current status and understandings have been broadly outlined.

Visualization support for risk-informed decision making when planning and managing software developments

NASA Technical Reports Server (NTRS)

Feather, Martin S.; Kiper, James D.; Menzies, Tim

2005-01-01

Key decisions are made in the early stages of planning and management of software developments. The information basis for these decisions is often a mix of analogy with past developments, and the best judgments of domain experts. Visualization of this information can support to such decision making by clarifying the status of the information and yielding insights into the ramifications of that information vis-a-vis decision alternatives.

[Application of optical flow dynamic texture in land use/cover change detection].

PubMed

Yan, Li; Gong, Yi-Long; Zhang, Yi; Duan, Wei

2014-11-01

In the present study, a novel change detection approach for high resolution remote sensing images is proposed based on the optical flow dynamic texture (OFDT), which could achieve the land use & land cover change information automatically with a dynamic description of ground-object changes. This paper describes the ground-object gradual change process from the principle using optical flow theory, which breaks the ground-object sudden change hypothesis in remote sensing change detection methods in the past. As the steps of this method are simple, it could be integrated in the systems and software such as Land Resource Management and Urban Planning software that needs to find ground-object changes. This method takes into account the temporal dimension feature between remote sensing images, which provides a richer set of information for remote sensing change detection, thereby improving the status that most of the change detection methods are mainly dependent on the spatial dimension information. In this article, optical flow dynamic texture is the basic reflection of changes, and it is used in high resolution remote sensing image support vector machine post-classification change detection, combined with spectral information. The texture in the temporal dimension which is considered in this article has a smaller amount of data than most of the textures in the spatial dimensions. The highly automated texture computing has only one parameter to set, which could relax the onerous manual evaluation present status. The effectiveness of the proposed approach is evaluated with the 2011 and 2012 QuickBird datasets covering Duerbert Mongolian Autonomous County of Daqing City, China. Then, the effects of different optical flow smooth coefficient and the impact on the description of the ground-object changes in the method are deeply analyzed: The experiment result is satisfactory, with an 87.29% overall accuracy and an 0.850 7 Kappa index, and the method achieves better performance than the post-classification change detection methods using spectral information only.

Educational Software Acquisition for Microcomputers.

ERIC Educational Resources Information Center

Erikson, Warren; Turban, Efraim

1985-01-01

Examination of issues involved in acquiring appropriate microcomputer software for higher education focuses on the following points: developing your own software; finding commercially available software; using published evaluations; pre-purchase testing; customizing and adapting commercial software; post-purchase testing; and software use. A…

REVEAL: Software Documentation and Platform Migration

NASA Technical Reports Server (NTRS)

Wilson, Michael A.; Veibell, Victoir T.; Freudinger, Lawrence C.

2008-01-01

The Research Environment for Vehicle Embedded Analysis on Linux (REVEAL) is reconfigurable data acquisition software designed for network-distributed test and measurement applications. In development since 2001, it has been successfully demonstrated in support of a number of actual missions within NASA s Suborbital Science Program. Improvements to software configuration control were needed to properly support both an ongoing transition to operational status and continued evolution of REVEAL capabilities. For this reason the project described in this report targets REVEAL software source documentation and deployment of the software on a small set of hardware platforms different from what is currently used in the baseline system implementation. This report specifically describes the actions taken over a ten week period by two undergraduate student interns and serves as a final report for that internship. The topics discussed include: the documentation of REVEAL source code; the migration of REVEAL to other platforms; and an end-to-end field test that successfully validates the efforts.

High Energy Physics Forum for Computational Excellence: Working Group Reports (I. Applications Software II. Software Libraries and Tools III. Systems)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habib, Salman; Roser, Robert

Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3)more » Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The final versions of the reports are combined in this document, and are presented along with introductory material.« less

High Energy Physics Forum for Computational Excellence: Working Group Reports (I. Applications Software II. Software Libraries and Tools III. Systems)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habib, Salman; Roser, Robert; LeCompte, Tom

2015-10-29

Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3)more » Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The final versions of the reports are combined in this document, and are presented along with introductory material.« less

PTSD and DNA Methylation in Select Immune Function Gene Promoter Regions: A Repeated Measures Case-control Study of U.S. Military Service Members

DTIC Science & Technology

2013-06-24

barrier induced by status epilepticus within the rat piriform cortex in interferon-gamma inde- pendent pathway. Brain Res. 1447, 126–134. doi:10.1016...hippocampus following status epilepticus . Neuroscience 170, 711–721. doi:10.1016/j.neuroscience. 2010.07.048 Sananbenesi, F., and Fischer, A. (2009). The...methylation status of each CpG locus was analyzed individually as a T/C SNP using QCpG software (Qiagen Pyrosequencing). The loci of specific CpGs measured

Development of Shanghai satellite laser ranging station

NASA Technical Reports Server (NTRS)

Yang, Fu-Min; Tan, De-Tong; Xiao, Chi-Kun; Chen, Wan-Zhen; Zhang, J.-H.; Zhang, Z.-P.; Lu, Wen-Hu; Hu, Z.-Q.; Tang, W.-F.; Chen, J.-P.

1993-01-01

The topics covered include the following: improvement of the system hardware; upgrading of the software; the observation status; preliminary daylight tracking capability; testing the new type of laser; and future plans.

State-of-the-Art Resources (SOAR) for Software Vulnerability Detection, Test, and Evaluation

DTIC Science & Technology

2014-07-01

preclude in-depth analysis, and widespread use of a Software -as-a- Service ( SaaS ) model that limits data availability and application to DoD systems...provide mobile application analysis using a Software - as-a- Service ( SaaS ) model. In this case, any software to be analyzed must be sent to the...tools are only available through a SaaS model. The widespread use of a Software -as-a- Service ( SaaS ) model as a sole evaluation model limits data

Art care: A multi-modality coronary 3D reconstruction and hemodynamic status assessment software.

PubMed

Siogkas, Panagiotis K; Stefanou, Kostas A; Athanasiou, Lambros S; Papafaklis, Michail I; Michalis, Lampros K; Fotiadis, Dimitrios I

2018-01-01

Due to the incremental increase of clinical interest in the development of software that allows the 3-dimensional (3D) reconstruction and the functional assessment of the coronary vasculature, several software packages have been developed and are available today. Taking this into consideration, we have developed an innovative suite of software modules that perform 3D reconstruction of coronary arterial segments using different coronary imaging modalities such as IntraVascular UltraSound (IVUS) and invasive coronary angiography images (ICA), Optical Coherence Tomography (OCT) and ICA images, or plain ICA images and can safely and accurately assess the hemodynamic status of the artery of interest. The user can perform automated or manual segmentation of the IVUS or OCT images, visualize in 3D the reconstructed vessel and export it to formats, which are compatible with other Computer Aided Design (CAD) software systems. We employ finite elements to provide the capability to assess the hemodynamic functionality of the reconstructed vessels by calculating the virtual functional assessment index (vFAI), an index that corresponds and has been shown to correlate well to the actual fractional flow reserve (FFR) value. All the modules of the proposed system have been thoroughly validated. In brief, the 3D-QCA module, compared to a successful commercial software of the same genre, presented very good correlation using several validation metrics, with a Pearson's correlation coefficient (R) for the calculated volumes, vFAI, length and minimum lumen diameter of 0.99, 0.99, 0.99 and 0.88, respectively. Moreover, the automatic lumen detection modules for IVUS and OCT presented very high accuracy compared to the annotations by medical experts with the Pearson's correlation coefficient reaching the values of 0.94 and 0.99, respectively. In this study, we have presented a user-friendly software for the 3D reconstruction of coronary arterial segments and the accurate hemodynamic assessment of the severity of existing stenosis.

Finding the right wheel when you don't want to reinvent it

NASA Astrophysics Data System (ADS)

Hucka, Michael

2017-01-01

The increasing amount of software being developed in all areas of science brings new capabilities as well as new challenges. Two of these challenges are finding potentially-relevant software, and being able to reuse it. The notion that "surely someone must have written a tool to do XYZ" often runs into the reality of thousands of Google hits with little detail about capabilities and status of different options. Software directories such as ASCL can add tremendous value by helping to improve the signal-to-noise ratio when searching for software; in addition, developers themselves can also act to make their work more easily found and understood. In this context, it can be useful to know what people do in practice when they look for software, and some of the factors that help or hinder their ability to reuse the software they do find. The results point to some simple steps that developers can take. Improved findability and reusability of software has broad potential impact, ranging from improved reproducibility of research results to better return on investment by funding agencies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valassi, A.; Clemencic, M.; Dykstra, D.

The Persistency Framework consists of three software packages (CORAL, COOL and POOL) addressing the data access requirements of the LHC experiments in different areas. It is the result of the collaboration between the CERN IT Department and the three experiments (ATLAS, CMS and LHCb) that use this software to access their data. POOL is a hybrid technology store for C++ objects, metadata catalogs and collections. CORAL is a relational database abstraction layer with an SQL-free API. COOL provides specific software tools and components for the handling of conditions data. This paper reports on the status and outlook of the projectmore » and reviews in detail the usage of each package in the three experiments.« less

Space Station Information Systems

NASA Technical Reports Server (NTRS)

Pittman, Clarence W.

1988-01-01

The utility of the Space Station is improved, the ability to manage and integrate its development and operation enhanced, and the cost and risk of developing the software for it is minimized by three major information systems. The Space Station Information System (SSIS) provides for the transparent collection and dissemination of operational information to all users and operators. The Technical and Management Information System (TMIS) provides all the developers with timely and consistent program information and a project management 'window' to assess the project status. The Software Support Environment (SSE) provides automated tools and standards to be used by all software developers. Together, these three systems are vital to the successful execution of the program.

Software Graphics Processing Unit (sGPU) for Deep Space Applications

NASA Technical Reports Server (NTRS)

McCabe, Mary; Salazar, George; Steele, Glen

2015-01-01

A graphics processing capability will be required for deep space missions and must include a range of applications, from safety-critical vehicle health status to telemedicine for crew health. However, preliminary radiation testing of commercial graphics processing cards suggest they cannot operate in the deep space radiation environment. Investigation into an Software Graphics Processing Unit (sGPU)comprised of commercial-equivalent radiation hardened/tolerant single board computers, field programmable gate arrays, and safety-critical display software shows promising results. Preliminary performance of approximately 30 frames per second (FPS) has been achieved. Use of multi-core processors may provide a significant increase in performance.

Software to Manage the Unmanageable

NASA Technical Reports Server (NTRS)

2005-01-01

In 1995, NASA s Jet Propulsion Laboratory (JPL) contracted Redmond, Washington-based Lucidoc Corporation, to design a technology infrastructure to automate the intersection between policy management and operations management with advanced software that automates document workflow, document status, and uniformity of document layout. JPL had very specific parameters for the software. It expected to store and catalog over 8,000 technical and procedural documents integrated with hundreds of processes. The project ended in 2000, but NASA still uses the resulting highly secure document management system, and Lucidoc has managed to help other organizations, large and small, with integrating document flow and operations management to ensure a compliance-ready culture.

Validation of Tendril TrueHome Using Software-to-Software Comparison

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maguire, Jeffrey B; Horowitz, Scott G; Moore, Nathan

This study performed comparative evaluation of EnergyPlus version 8.6 and Tendril TrueHome, two physics-based home energy simulation models, to identify differences in energy consumption predictions between the two programs and resolve discrepancies between them. EnergyPlus is considered a benchmark, best-in-class software tool for building energy simulation. This exercise sought to improve both software tools through additional evaluation/scrutiny.

Status and the evaluation of workplace deviance.

PubMed

Bowles, Hannah Riley; Gelfand, Michele

2010-01-01

Bias in the evaluation of workplace misbehavior is hotly debated in courts and corporations, but it has received little empirical attention. Classic sociological literature suggests that deviance by lower-status actors will be evaluated more harshly than deviance by higher-status actors. However, more recent psychological literature suggests that discrimination in the evaluation of misbehavior may be moderated by the relative status of the evaluator because status influences both rule observance and attitudes toward social hierarchy. In Study 1, the psychological experience of higher status decreased rule observance and increased preferences for social hierarchy, as we theorized. In three subsequent experiments, we tested the hypothesis that higher-status evaluators would be more discriminating in their evaluations of workplace misbehavior, evaluating fellow higher-status deviants more leniently than lower-status deviants. Results supported the hypothesized interactive effect of evaluator status and target status on the evaluation of workplace deviance, when both achieved status characteristics (Studies 2a and 2b) and ascribed status characteristics (i.e., race and gender in Study 3) were manipulated.

Usability Evaluation of Multimedia Courseware (MEL-SindD)

NASA Astrophysics Data System (ADS)

Yussof, Rahmah Lob; Badioze Zaman, Halimah

Constructive evaluations on any software are needed to ensure the effectiveness and usability of the software. This assesment on the multimedia courseware is part of the researcher's study towards the development and usability of the early reading software for students with Down Syndrome (MEL-SindD). This paper will discuss the usability assesment of this courseware, the methods used for the evaluation as well as suitable approaches that can be deployed to evaluate the courseware effectiveness to disabled children.

Evaluation of an educational technology regarding clinical evaluation of preterm newborns.

PubMed

Fonseca, Luciana Mara Monti; Aredes, Natália Del'Angelo; Leite, Adriana Moraes; dos Santos, Claudia Benedita; de Lima, Regina Aparecida Garcia; Scochi, Carmen Gracinda Silvan

2013-02-01

To evaluate, from the students' point of view, educational software developed as a tool to help teachers and students in neonatal nursing. The study evaluates the contents and simulations addressed in the software. A total of 57 undergraduate nursing students affiliated with five Brazilian public colleges participated. The general assessment of the software was highly satisfactory: 82.4% of the sample characterized the software as quite effective as a teaching tool. Most components were assessed as good or very good. The participants' suggestions and comments are being considered in the improvement and adaptation of the new software version. The results show that the product is adequate for use in neonatal nursing courses and nursing training on the physical examination techniques and semiology of preterm newborns, falling within the pedagogical framework of active methods.

MicroSIFT Courseware Evaluation. [Set 13 (294-319), Set 14 (320-361), with Hardware (HRD) and Subject (SBJ) Indexes to Both Sets.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This document consists of 68 microcomputer software package evaluations prepared by MicroSIFT (Microcomputer Software and Information for Teachers) Clearinghouse at the Northwest Regional Education Laboratory. There are 26 packages in set 13 and 42 in set 14. Each software review lists producer, time and place of evaluation, cost, ability level,…

Common Data Acquisition Systems (DAS) Software Development for Rocket Propulsion Test (RPT) Test Facilities

NASA Technical Reports Server (NTRS)

Hebert, Phillip W., Sr.; Davis, Dawn M.; Turowski, Mark P.; Holladay, Wendy T.; Hughes, Mark S.

2012-01-01

The advent of the commercial space launch industry and NASA's more recent resumption of operation of Stennis Space Center's large test facilities after thirty years of contractor control resulted in a need for a non-proprietary data acquisition systems (DAS) software to support government and commercial testing. The software is designed for modularity and adaptability to minimize the software development effort for current and future data systems. An additional benefit of the software's architecture is its ability to easily migrate to other testing facilities thus providing future commonality across Stennis. Adapting the software to other Rocket Propulsion Test (RPT) Centers such as MSFC, White Sands, and Plumbrook Station would provide additional commonality and help reduce testing costs for NASA. Ultimately, the software provides the government with unlimited rights and guarantees privacy of data to commercial entities. The project engaged all RPT Centers and NASA's Independent Verification & Validation facility to enhance product quality. The design consists of a translation layer which provides the transparency of the software application layers to underlying hardware regardless of test facility location and a flexible and easily accessible database. This presentation addresses system technical design, issues encountered, and the status of Stennis development and deployment.

Relationship Between the Remaining Dentin Thickness and Coronal Pulp Status of Decayed Primary Molars.

PubMed

Berbari, Roula; Fayyad-Kazan, Hussein; Ezzedine, Mohamad; Fayyad-Kazan, Mohammad; Bandon, Daniel; Sfeir, Elia

2017-01-01

The aim of this study was to assess the correlation between the remaining dentin thickness (RDT) in deep decayed primary molars and the inflammatory status and bacterial composition of the corresponding coronal pulp. We hypothesized that RDT could be used as a reference for clinicians in assigning the indication for pulpotomy. Pulpotomies were conducted on the cameral pulp of 48 primary molars. Microorganisms, such as Lactobacillus sp., Streptococcus sp., and Prevotella sp., were identified and quantified and levels of tumor necrosis factor-alpha (TNF-α) and interlukin-6 (IL-6) were assessed. The correlation between the pre-operative RDT based on radiographic images and inflammatory-microbial profiles in vitro was evaluated using Spearman's rho correlation coefficient. All data analysis was performed using a statistical software program (SPSS 20.0, SPSS Inc., Chicago, IL, USA). Immunological and microbiological studies revealed elevated levels of TNF-α and IL-6 cytokines, and Lactobacillus sp., Streptococcus sp. and Prevotella sp. in the cameral pulp with an RDT measuring up to 1.1 mm. No significant relationship could be established between RDT, inflammatory status and microbial content of the pulps. The RDT remains a key clinical factor that needs to be assessed when establishing the indication for pulpotomy. Additional parameters that can improve this therapy should be investigated in the future.

Garnering an In-depth Understanding of Men Who Have Sex with Men in Chennai, India: A Qualitative Analysis of Sexual Minority Status and Psychological Distress

PubMed Central

Closson, Elizabeth F.; Thomas, Beena; Mayer, Kenneth H.; Betancourt, Theresa; Menon, Sunil; Safren, Steven A.

2015-01-01

Men who have sex with men (MSM) in India are a hidden and largely understudied population, and havean HIV prevalence 17 times higher than that of the general Indian population. Experiences of social marginalization and negative psychosocial conditions occur concurrent to HIV risk among Indian MSM. To better understand the contextual variables driving HIV risk and inform intervention development, five focus groups (n = 46) and nine key informant interviews were conducted with 55 MSM in Chennai in 2010. NVivo software was used to code the transcripts, and data were analyzed using qualitative descriptive analysis methodology. Participants described sources of psychological distress and low self-worth related to gender non-conformity and sexual minority status. These included stigma from society, pressure to marry, lack of familial acceptance, childhood sexual abuse, and the imperative to keep sexual minority status a secret. Participants' personal evaluations revealed that self-acceptance may be an important resilience factor that can shield these psychosocial and HIV risk factors. In promoting health-seeking behavioral changes for Indian MSM at an individual level, our findings point to the potential strength of strategies that focus on self-acceptance of one's sexual minority identity to foster better psychosocial and overall health. PMID:25358949

Garnering an in-depth understanding of men who have sex with men in Chennai, India: a qualitative analysis of sexual minority status and psychological distress.

PubMed

Mimiaga, Matthew J; Closson, Elizabeth F; Thomas, Beena; Mayer, Kenneth H; Betancourt, Theresa; Menon, Sunil; Safren, Steven A

2015-10-01

Men who have sex with men (MSM) in India are a hidden and largely understudied population, and have an HIV prevalence 17 times higher than that of the general Indian population. Experiences of social marginalization and negative psychosocial conditions occur concurrent to HIV risk among Indian MSM. To better understand the contextual variables driving HIV risk and inform intervention development, five focus groups (n = 46) and nine key informant interviews were conducted with 55 MSM in Chennai in 2010. NVivo software was used to code the transcripts, and data were analyzed using qualitative descriptive analysis methodology. Participants described sources of psychological distress and low self-worth related to gender non-conformity and sexual minority status. These included stigma from society, pressure to marry, lack of familial acceptance, childhood sexual abuse, and the imperative to keep sexual minority status a secret. Participants' personal evaluations revealed that self-acceptance may be an important resilience factor that can shield these psychosocial and HIV risk factors. In promoting health-seeking behavioral changes for Indian MSM at an individual level, our findings point to the potential strength of strategies that focus on self-acceptance of one's sexual minority identity to foster better psychosocial and overall health.

Quantitative wound healing measurement and monitoring system based on an innovative 3D imaging system

NASA Astrophysics Data System (ADS)

Yi, Steven; Yang, Arthur; Yin, Gongjie; Wen, James

2011-03-01

In this paper, we report a novel three-dimensional (3D) wound imaging system (hardware and software) under development at Technest Inc. System design is aimed to perform accurate 3D measurement and modeling of a wound and track its healing status over time. Accurate measurement and tracking of wound healing enables physicians to assess, document, improve, and individualize the treatment plan given to each wound patient. In current wound care practices, physicians often visually inspect or roughly measure the wound to evaluate the healing status. This is not an optimal practice since human vision lacks precision and consistency. In addition, quantifying slow or subtle changes through perception is very difficult. As a result, an instrument that quantifies both skin color and geometric shape variations would be particularly useful in helping clinicians to assess healing status and judge the effect of hyperemia, hematoma, local inflammation, secondary infection, and tissue necrosis. Once fully developed, our 3D imaging system will have several unique advantages over traditional methods for monitoring wound care: (a) Non-contact measurement; (b) Fast and easy to use; (c) up to 50 micron measurement accuracy; (d) 2D/3D Quantitative measurements;(e) A handheld device; and (f) Reasonable cost (< $1,000).

Present status of computational tools for maglev development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Z.; Chen, S.S.; Rote, D.M.

1991-10-01

High-speed vehicles that employ magnetic levitation (maglev) have received great attention worldwide as a means of relieving both highway and air-traffic congestion. At this time, Japan and Germany are leading the development of maglev. After fifteen years of inactivity that is attributed to technical policy decisions, the federal government of the United States has reconsidered the possibility of using maglev in the United States. The National Maglev Initiative (NMI) was established in May 1990 to assess the potential of maglev in the United States. One of the tasks of the NMI, which is also the objective of this report, ismore » to determine the status of existing computer software that can be applied to maglev-related problems. The computational problems involved in maglev assessment, research, and development can be classified into two categories: electromagnetic and mechanical. Because most maglev problems are complicated and difficult to solve analytically, proper numerical methods are needed to find solutions. To determine the status of maglev-related software, developers and users of computer codes were surveyed. The results of the survey are described in this report. 25 refs.« less

Multiattribute selection of acute stroke imaging software platform for Extending the Time for Thrombolysis in Emergency Neurological Deficits (EXTEND) clinical trial.

PubMed

Churilov, Leonid; Liu, Daniel; Ma, Henry; Christensen, Soren; Nagakane, Yoshinari; Campbell, Bruce; Parsons, Mark W; Levi, Christopher R; Davis, Stephen M; Donnan, Geoffrey A

2013-04-01

The appropriateness of a software platform for rapid MRI assessment of the amount of salvageable brain tissue after stroke is critical for both the validity of the Extending the Time for Thrombolysis in Emergency Neurological Deficits (EXTEND) Clinical Trial of stroke thrombolysis beyond 4.5 hours and for stroke patient care outcomes. The objective of this research is to develop and implement a methodology for selecting the acute stroke imaging software platform most appropriate for the setting of a multi-centre clinical trial. A multi-disciplinary decision making panel formulated the set of preferentially independent evaluation attributes. Alternative Multi-Attribute Value Measurement methods were used to identify the best imaging software platform followed by sensitivity analysis to ensure the validity and robustness of the proposed solution. Four alternative imaging software platforms were identified. RApid processing of PerfusIon and Diffusion (RAPID) software was selected as the most appropriate for the needs of the EXTEND trial. A theoretically grounded generic multi-attribute selection methodology for imaging software was developed and implemented. The developed methodology assured both a high quality decision outcome and a rational and transparent decision process. This development contributes to stroke literature in the area of comprehensive evaluation of MRI clinical software. At the time of evaluation, RAPID software presented the most appropriate imaging software platform for use in the EXTEND clinical trial. The proposed multi-attribute imaging software evaluation methodology is based on sound theoretical foundations of multiple criteria decision analysis and can be successfully used for choosing the most appropriate imaging software while ensuring both robust decision process and outcomes. © 2012 The Authors. International Journal of Stroke © 2012 World Stroke Organization.

Evaluating Math Drill and Practice Programs.

ERIC Educational Resources Information Center

Schnorr, Janice M.; Semmel, Dorothy S.

1986-01-01

General guidelines for a process evaluation of software for a specific subject and grade include: (1) Specify instructional objectives and list desired software program characteristics; (2) Access and review descriptions of programs (information sources for math programs are listed); (3) Preview software; and (4) Compare and make purchase…

Toward Deriving Software Architectures from Quality Attributes

DTIC Science & Technology

1994-08-01

administration of Its orograms on the basis of religion creec ancestry. belief, age veteran status sexuai orientation or rn violation of federal state or Ioca...environments rely on the notion of a "tool bus" or an explicit shared repository [ Wasser - man 89] to allow easy integration of tools. 4.7 Unit...attributed parse tree and symbol table that the compiler cre- ates and annotates during its various phases. This results in a very different software

Management control and status reports documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 5

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the fifth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for management control and status reports used in monitoring and controlling the management, development, and assurance of informations systems and software, hardware, and operational procedures components, and related processes.

Cargo Movement Operations System (CMOS) Updated Draft Software Requirements Specification (Applications CSCI) Increment II

DTIC Science & Technology

1990-11-29

appropriate to combine them into one paragraph. CMOS PMO ACCEPTS COY24ENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT...COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SRS1-0004...ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SRS1-0005 PROGRAM OFFICE

Cargo Movement Operations System (CMOS). Final Software Design Document. Increment III. (PC Unix - Air Force Configuration)

DTIC Science & Technology

1991-07-03

required changes to this matrix. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN...this appendix should be updated to include all necessary changes. CMOS PMO ACCEPTS COMMENT: YES [ ] NO [ ] ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION...ERCI ACCEPTS COMMENT: YES [ ] NO [ ] COMMENT DISPOSITION: COMMENT STATUS: OPEN [ ] CLOSED [ ] ORIGINATOR CONTROL NUMBER: SDD3-0004 PROGRAM OFFICE

HiCAT Software Infrastructure: Safe hardware control with object oriented Python

NASA Astrophysics Data System (ADS)

Moriarty, Christopher; Brooks, Keira; Soummer, Remi

2018-01-01

High contrast imaging for Complex Aperture Telescopes (HiCAT) is a testbed designed to demonstrate coronagraphy and wavefront control for segmented on-axis space telescopes such as envisioned for LUVOIR. To limit the air movements in the testbed room, software interfaces for several different hardware components were developed to completely automate operations. When developing software interfaces for many different pieces of hardware, unhandled errors are commonplace and can prevent the software from properly closing a hardware resource. Some fragile components (e.g. deformable mirrors) can be permanently damaged because of this. We present an object oriented Python-based infrastructure to safely automate hardware control and optical experiments. Specifically, conducting high-contrast imaging experiments while monitoring humidity and power status along with graceful shutdown processes even for unexpected errors. Python contains a construct called a “context manager” that allows you define code to run when a resource is opened or closed. Context managers ensure that a resource is properly closed, even when unhandled errors occur. Harnessing the context manager design, we also use Python’s multiprocessing library to monitor humidity and power status without interrupting the experiment. Upon detecting a safety problem, the master process sends an event to the child process that triggers the context managers to gracefully close any open resources. This infrastructure allows us to queue up several experiments and safely operate the testbed without a human in the loop.

Has computational creativity successfully made it "Beyond the Fence" in musical theatre?

NASA Astrophysics Data System (ADS)

Jordanous, Anna

2017-10-01

A significant test for software is to task it with replicating human performance, as done recently with creative software and the commercial project Beyond the Fence (undertaken for a television documentary Computer Says Show). The remit of this project was to use computer software as much as possible to produce "the world's first computer-generated musical". Several creative systems were used to generate this musical, which was performed in London's West End in 2016. This paper considers the challenge of evaluating this project. Current computational creativity evaluation methods are ill-suited to evaluating projects that involve creative input from multiple systems and people. Following recent inspiration within computational creativity research from interaction design, here the DECIDE evaluation framework is applied to evaluate the Beyond the Fence project. Evaluation finds that the project was reasonably successful at achieving the task of using computational generation to produce a credible musical. Lessons have been learned for future computational creativity projects though, particularly for affording creative software more agency and enabling software to interact with other creative partners. Upon reflection, the DECIDE framework emerges as a useful evaluation "checklist" (if not a tangible operational methodology) for evaluating multiple creative systems participating in a creative task.

A framework for assessing the adequacy and effectiveness of software development methodologies

NASA Technical Reports Server (NTRS)

Arthur, James D.; Nance, Richard E.

1990-01-01

Tools, techniques, environments, and methodologies dominate the software engineering literature, but relatively little research in the evaluation of methodologies is evident. This work reports an initial attempt to develop a procedural approach to evaluating software development methodologies. Prominent in this approach are: (1) an explication of the role of a methodology in the software development process; (2) the development of a procedure based on linkages among objectives, principles, and attributes; and (3) the establishment of a basis for reduction of the subjective nature of the evaluation through the introduction of properties. An application of the evaluation procedure to two Navy methodologies has provided consistent results that demonstrate the utility and versatility of the evaluation procedure. Current research efforts focus on the continued refinement of the evaluation procedure through the identification and integration of product quality indicators reflective of attribute presence, and the validation of metrics supporting the measure of those indicators. The consequent refinement of the evaluation procedure offers promise of a flexible approach that admits to change as the field of knowledge matures. In conclusion, the procedural approach presented in this paper represents a promising path toward the end goal of objectively evaluating software engineering methodologies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mancuso, C.A.

The INEL Database of BNCT Information and Treatment (TIDBIT) has been under development for several years. Late in 1993, a new software development team took over the project and did and assessment of the current implementation status, and determined that the user interface was unsatisfactory for the expected users and that the data structures were out of step with the current state of reality. The team evaluated several tools that would improve the user interface to make the system easier to use. Uniface turned out to be the product of choice. During 1994, TIDBIT got its name, underwent a completemore » change of appearance, had a major overhaul to the data structures that support the application, and system documentation was begun. A prototype of the system was demonstrated in September 1994.« less

Current Status of the Beam Position Monitoring System at TLS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuo, C. H.; Hu, K. H.; Chen, Jenny

2006-11-20

The beam position monitoring system is an important part of a synchrotron light source that supports its routine operation and studies of beam physics. The Taiwan light source is equipped with 59 BPMs. Highly precise closed orbits are measured by multiplexing BPMs. Data are acquired using multi-channel 16-bit ADC modules. Orbit data are sampled every millisecond. Fast orbit data are shared in a reflective memory network to support fast orbit feedback. Averaged data were updated to control database at a rate of 10 Hz. A few new generation digital BPMs were tested to evaluate their performance and functionality. This reportmore » summarizes the system structure, the software environment and the preliminary beam test of the BPM system.« less

Current Status of the Beam Position Monitoring System at TLS

NASA Astrophysics Data System (ADS)

Kuo, C. H.; Hu, K. H.; Chen, Jenny; Lee, Demi; Wang, C. J.; Hsu, S. Y.; Hsu, K. T.

2006-11-01

The beam position monitoring system is an important part of a synchrotron light source that supports its routine operation and studies of beam physics. The Taiwan light source is equipped with 59 BPMs. Highly precise closed orbits are measured by multiplexing BPMs. Data are acquired using multi-channel 16-bit ADC modules. Orbit data are sampled every millisecond. Fast orbit data are shared in a reflective memory network to support fast orbit feedback. Averaged data were updated to control database at a rate of 10 Hz. A few new generation digital BPMs were tested to evaluate their performance and functionality. This report summarizes the system structure, the software environment and the preliminary beam test of the BPM system.

Report: Scientific Software.

ERIC Educational Resources Information Center

Borman, Stuart A.

1985-01-01

Discusses various aspects of scientific software, including evaluation and selection of commercial software products; program exchanges, catalogs, and other information sources; major data analysis packages; statistics and chemometrics software; and artificial intelligence. (JN)

First Evaluation of Infrared Thermography as a Tool for the Monitoring of Udder Health Status in Farms of Dairy Cows.

PubMed

Zaninelli, Mauro; Redaelli, Veronica; Luzi, Fabio; Bronzo, Valerio; Mitchell, Malcolm; Dell'Orto, Vittorio; Bontempo, Valentino; Cattaneo, Donata; Savoini, Giovanni

2018-03-14

The aim of the present study was to test infrared thermography (IRT), under field conditions, as a possible tool for the evaluation of cow udder health status. Thermographic images (n. 310) from different farms (n. 3) were collected and evaluated using a dedicated software application to calculate automatically and in a standardized way, thermographic indices of each udder. Results obtained have confirmed a significant relationship between udder surface skin temperature (USST) and classes of somatic cell count in collected milk samples. Sensitivity and specificity in the classification of udder health were: 78.6% and 77.9%, respectively, considering a level of somatic cell count ( SCC ) of 200,000 cells/mL as a threshold to classify a subclinical mastitis or 71.4% and 71.6%, respectively when a threshold of 400,000 cells/mL was adopted. Even though the sensitivity and specificity were lower than in other published papers dealing with non-automated analysis of IRT images, they were considered acceptable as a first field application of this new and developing technology. Future research will permit further improvements in the use of IRT, at farm level. Such improvements could be attained through further image processing and enhancement, and the application of indicators developed and tested in the present study with the purpose of developing a monitoring system for the automatic and early detection of mastitis in individual animals on commercial farms.

First Evaluation of Infrared Thermography as a Tool for the Monitoring of Udder Health Status in Farms of Dairy Cows

PubMed Central

Luzi, Fabio; Bronzo, Valerio; Mitchell, Malcolm; Dell’Orto, Vittorio; Bontempo, Valentino; Savoini, Giovanni

2018-01-01

The aim of the present study was to test infrared thermography (IRT), under field conditions, as a possible tool for the evaluation of cow udder health status. Thermographic images (n. 310) from different farms (n. 3) were collected and evaluated using a dedicated software application to calculate automatically and in a standardized way, thermographic indices of each udder. Results obtained have confirmed a significant relationship between udder surface skin temperature (USST) and classes of somatic cell count in collected milk samples. Sensitivity and specificity in the classification of udder health were: 78.6% and 77.9%, respectively, considering a level of somatic cell count (SCC) of 200,000 cells/mL as a threshold to classify a subclinical mastitis or 71.4% and 71.6%, respectively when a threshold of 400,000 cells/mL was adopted. Even though the sensitivity and specificity were lower than in other published papers dealing with non-automated analysis of IRT images, they were considered acceptable as a first field application of this new and developing technology. Future research will permit further improvements in the use of IRT, at farm level. Such improvements could be attained through further image processing and enhancement, and the application of indicators developed and tested in the present study with the purpose of developing a monitoring system for the automatic and early detection of mastitis in individual animals on commercial farms. PMID:29538352

Computer Software Information for Educators: A New Approach to Portrayal of Student Tryout Data.

ERIC Educational Resources Information Center

Della-Piana, Gabriel; Della-Piana, Connie Kubo

1984-01-01

Suggests conventional evaluation reports are inappropriate for what needs to be portrayed for software users concerned with acquisition, software adaptation, design and development, and teacher implementation decisions. Two forms for evaluating information are described and illustrated--a narrative portrayal form and a design and development…

Computer software management, evaluation, and dissemination

NASA Technical Reports Server (NTRS)

1983-01-01

The activities of the Computer Software Management and Information Center involving the collection, processing, and distribution of software developed under the auspices of NASA and certain other federal agencies are reported. Program checkout and evaluation, inventory control, customer services and marketing, dissemination, program maintenance, and special development tasks are discussed.

A Guide to Software Evaluation.

ERIC Educational Resources Information Center

Leonard, Rex; LeCroy, Barbara

Arguing that software evaluation is crucial to the quality of courseware available in a school, this paper begins by discussing reasons why microcomputers are making such a tremendous impact on education, and notes that, although the quality of software has improved over the years, the challenge for teachers to integrate computing into the…

Using a Foundational Ontology for Reengineering a Software Enterprise Ontology

NASA Astrophysics Data System (ADS)

Perini Barcellos, Monalessa; de Almeida Falbo, Ricardo

The knowledge about software organizations is considerably relevant to software engineers. The use of a common vocabulary for representing the useful knowledge about software organizations involved in software projects is important for several reasons, such as to support knowledge reuse and to allow communication and interoperability between tools. Domain ontologies can be used to define a common vocabulary for sharing and reuse of knowledge about some domain. Foundational ontologies can be used for evaluating and re-designing domain ontologies, giving to these real-world semantics. This paper presents an evaluating of a Software Enterprise Ontology that was reengineered using the Unified Foundation Ontology (UFO) as basis.

Revealing the ISO/IEC 9126-1 Clique Tree for COTS Software Evaluation

NASA Technical Reports Server (NTRS)

Morris, A. Terry

2007-01-01

Previous research has shown that acyclic dependency models, if they exist, can be extracted from software quality standards and that these models can be used to assess software safety and product quality. In the case of commercial off-the-shelf (COTS) software, the extracted dependency model can be used in a probabilistic Bayesian network context for COTS software evaluation. Furthermore, while experts typically employ Bayesian networks to encode domain knowledge, secondary structures (clique trees) from Bayesian network graphs can be used to determine the probabilistic distribution of any software variable (attribute) using any clique that contains that variable. Secondary structures, therefore, provide insight into the fundamental nature of graphical networks. This paper will apply secondary structure calculations to reveal the clique tree of the acyclic dependency model extracted from the ISO/IEC 9126-1 software quality standard. Suggestions will be provided to describe how the clique tree may be exploited to aid efficient transformation of an evaluation model.

Finding Helpful Software Reviews.

ERIC Educational Resources Information Center

Kruse, Ted, Comp.

1987-01-01

Provides a list of evaluation services currently producing critical reviews of educational software. Includes information about The Apple K-12 Curriculum Software Reference, The Educational Software Preview, The Educational Software Selector, MicroSIFT, and Only The Best: The Discriminating Guide for Preschool-Grade 12. (TW)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cook, Kris A.; Scholtz, Jean; Whiting, Mark A.

The VAST Challenge has been a popular venue for academic and industry participants for over ten years. Many participants comment that the majority of their time in preparing VAST Challenge entries is discovering elements in their software environments that need to be redesigned in order to solve the given task. Fortunately, there is no need to wait until the VAST Challenge is announced to test out software systems. The Visual Analytics Benchmark Repository contains all past VAST Challenge tasks, data, solutions and submissions. This paper details the various types of evaluations that may be conducted using the Repository information. Inmore » this paper we describe how developers can do informal evaluations of various aspects of their visual analytics environments using VAST Challenge information. Aspects that can be evaluated include the appropriateness of the software for various tasks, the various data types and formats that can be accommodated, the effectiveness and efficiency of the process supported by the software, and the intuitiveness of the visualizations and interactions. Researchers can compare their visualizations and interactions to those submitted to determine novelty. In addition, the paper provides pointers to various guidelines that software teams can use to evaluate the usability of their software. While these evaluations are not a replacement for formal evaluation methods, this information can be extremely useful during the development of visual analytics environments.« less

Automation of Military Civil Engineering and Site Design Functions: Software Evaluation

DTIC Science & Technology

1989-09-01

promising advantage over manual methods, USACERL is to evaluate available software to determine which, if any, is best suited to the type of civil...moved. Therefore, original surface data were assembled by scaling the northing and easting distances of field elevations and entering them manually into...in the software or requesting an update or addition to the software or manuals . Responses to forms submitted during the test were received at

Adaption of the AMDIS Method to Flight Status on the VCAM Instrument

NASA Technical Reports Server (NTRS)

Mandrake, Lukas; Bornstein, Benjamin J.; Lee, Seungwon; Bue, Brian D.

2011-01-01

Software has been developed to function onboard the International Space Station (ISS) to help safeguard human health by detecting compounds of concern in the cabin atmosphere, both in identity and concentration.

Statistical Software Engineering

DTIC Science & Technology

1998-04-13

multiversion software subject to coincident errors. IEEE Trans. Software Eng. SE-11:1511-1517. Eckhardt, D.E., A.K Caglayan, J.C. Knight, L.D. Lee, D.F...J.C. and N.G. Leveson. 1986. Experimental evaluation of the assumption of independence in multiversion software. IEEE Trans. Software

Status and Plans for the Vienna VLBI and Satellite Software (VieVS 3.0)

NASA Astrophysics Data System (ADS)

Gruber, Jakob; Böhm, Johannes; Böhm, Sigrid; Girdiuk, Anastasiia; Hellerschmied, Andreas; Hofmeister, Armin; Krásná, Hana; Kwak, Younghee; Landskron, Daniel; Madzak, Matthias; Mayer, David; McCallum, Jamie; Plank, Lucia; Schartner, Matthias; Shabala, Stas; Teke, Kamil; Sun, Jing

2017-04-01

The Vienna VLBI and Satellite Software (VieVS) is a geodetic analysis software developed and maintained at Technische Universität Wien (TU Wien) with contributions from groups all over the world. It is used for both academic purposes in university courses as well as for providing Very Long Baseline Interferometry (VLBI) analysis results to the geodetic community. Written in a modular structure in Matlab, VieVS offers easy access to the source code and the possibility to adapt the programs for particular purposes. The new version 3.0, released in early 2017, includes several new features, e.g., improved scheduling capabilities for observing quasars and satellites. This poster gives an overview of all VLBI-related activities in Vienna and provides an outlook to future plans concerning the Vienna VLBI and Satellite Software (VieVS).

MicroSIFT Courseware Evaluations [Set 15 (362-388) and Set 16 (389-441), with an Index Listing the Contents of Each Set (Sets 1-16) and a Cumulative Subject Index (Sets 1-16)].

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This document consists of 80 microcomputer software package evaluations prepared by the MicroSIFT (Microcomputer Software and Information for Teachers) Clearinghouse at the Northwest Regional Education Laboratory. Set 15 consists of 27 packages; set 16 consists of 53 packages. Each software review lists producer, time and place of evaluation,…

Secure Encapsulation and Publication of Biological Services in the Cloud Computing Environment

PubMed Central

Zhang, Weizhe; Wang, Xuehui; Lu, Bo; Kim, Tai-hoon

2013-01-01

Secure encapsulation and publication for bioinformatics software products based on web service are presented, and the basic function of biological information is realized in the cloud computing environment. In the encapsulation phase, the workflow and function of bioinformatics software are conducted, the encapsulation interfaces are designed, and the runtime interaction between users and computers is simulated. In the publication phase, the execution and management mechanisms and principles of the GRAM components are analyzed. The functions such as remote user job submission and job status query are implemented by using the GRAM components. The services of bioinformatics software are published to remote users. Finally the basic prototype system of the biological cloud is achieved. PMID:24078906

Secure encapsulation and publication of biological services in the cloud computing environment.

PubMed

Zhang, Weizhe; Wang, Xuehui; Lu, Bo; Kim, Tai-hoon

2013-01-01

Secure encapsulation and publication for bioinformatics software products based on web service are presented, and the basic function of biological information is realized in the cloud computing environment. In the encapsulation phase, the workflow and function of bioinformatics software are conducted, the encapsulation interfaces are designed, and the runtime interaction between users and computers is simulated. In the publication phase, the execution and management mechanisms and principles of the GRAM components are analyzed. The functions such as remote user job submission and job status query are implemented by using the GRAM components. The services of bioinformatics software are published to remote users. Finally the basic prototype system of the biological cloud is achieved.

PySE: Software for extracting sources from radio images

NASA Astrophysics Data System (ADS)

Carbone, D.; Garsden, H.; Spreeuw, H.; Swinbank, J. D.; van der Horst, A. J.; Rowlinson, A.; Broderick, J. W.; Rol, E.; Law, C.; Molenaar, G.; Wijers, R. A. M. J.

2018-04-01

PySE is a Python software package for finding and measuring sources in radio telescope images. The software was designed to detect sources in the LOFAR telescope images, but can be used with images from other radio telescopes as well. We introduce the LOFAR Telescope, the context within which PySE was developed, the design of PySE, and describe how it is used. Detailed experiments on the validation and testing of PySE are then presented, along with results of performance testing. We discuss some of the current issues with the algorithms implemented in PySE and their interaction with LOFAR images, concluding with the current status of PySE and its future development.

Software risk management through independent verification and validation

NASA Technical Reports Server (NTRS)

Callahan, John R.; Zhou, Tong C.; Wood, Ralph

1995-01-01

Software project managers need tools to estimate and track project goals in a continuous fashion before, during, and after development of a system. In addition, they need an ability to compare the current project status with past project profiles to validate management intuition, identify problems, and then direct appropriate resources to the sources of problems. This paper describes a measurement-based approach to calculating the risk inherent in meeting project goals that leverages past project metrics and existing estimation and tracking models. We introduce the IV&V Goal/Questions/Metrics model, explain its use in the software development life cycle, and describe our attempts to validate the model through the reverse engineering of existing projects.

Recent developments in software for the Belle II aerogel RICH

NASA Astrophysics Data System (ADS)

Šantelj, L.; Adachi, I.; Dolenec, R.; Hataya, K.; Iori, S.; Iwata, S.; Kakuno, H.; Kataura, R.; Kawai, H.; Kindo, H.; Kobayashi, T.; Korpar, S.; Križan, P.; Kumita, T.; Mrvar, M.; Nishida, S.; Ogawa, K.; Ogawa, S.; Pestotnik, R.; Sumiyoshi, T.; Tabata, M.; Yonenaga, M.; Yusa, Y.

2017-12-01

For the Belle II spectrometer a proximity focusing RICH counter with an aerogel radiator (ARICH) will be employed as a PID system in the forward end-cap region of the spectrometer. The detector will provide about 4σ separation of pions and kaons up to momenta of 3.5 GeV/c, at the kinematic limits of the experiment. We present the up-to-date status of the ARICH simulation and reconstruction software, focusing on the recent improvements of the reconstruction algorithms and detector description in the Geant4 simulation. In addition, as a demonstration of detector readout software functionality we show the first cosmic ray Cherenkov rings observed in the ARICH.

Training software using virtual-reality technology and pre-calculated effective dose data.

PubMed

Ding, Aiping; Zhang, Di; Xu, X George

2009-05-01

This paper describes the development of a software package, called VR Dose Simulator, which aims to provide interactive radiation safety and ALARA training to radiation workers using virtual-reality (VR) simulations. Combined with a pre-calculated effective dose equivalent (EDE) database, a virtual radiation environment was constructed in VR authoring software, EON Studio, using 3-D models of a real nuclear power plant building. Models of avatars representing two workers were adopted with arms and legs of the avatar being controlled in the software to simulate walking and other postures. Collision detection algorithms were developed for various parts of the 3-D power plant building and avatars to confine the avatars to certain regions of the virtual environment. Ten different camera viewpoints were assigned to conveniently cover the entire virtual scenery in different viewing angles. A user can control the avatar to carry out radiological engineering tasks using two modes of avatar navigation. A user can also specify two types of radiation source: Cs and Co. The location of the avatar inside the virtual environment during the course of the avatar's movement is linked to the EDE database. The accumulative dose is calculated and displayed on the screen in real-time. Based on the final accumulated dose and the completion status of all virtual tasks, a score is given to evaluate the performance of the user. The paper concludes that VR-based simulation technologies are interactive and engaging, thus potentially useful in improving the quality of radiation safety training. The paper also summarizes several challenges: more streamlined data conversion, realistic avatar movement and posture, more intuitive implementation of the data communication between EON Studio and VB.NET, and more versatile utilization of EDE data such as a source near the body, etc., all of which needs to be addressed in future efforts to develop this type of software.

A software control system for the ACTS high-burst-rate link evaluation terminal

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.; Daugherty, Elaine S.

1991-01-01

Control and performance monitoring of NASA's High Burst Rate Link Evaluation Terminal (HBR-LET) is accomplished by using several software control modules. Different software modules are responsible for controlling remote radio frequency (RF) instrumentation, supporting communication between a host and a remote computer, controlling the output power of the Link Evaluation Terminal and data display. Remote commanding of microwave RF instrumentation and the LET digital ground terminal allows computer control of various experiments, including bit error rate measurements. Computer communication allows system operators to transmit and receive from the Advanced Communications Technology Satellite (ACTS). Finally, the output power control software dynamically controls the uplink output power of the terminal to compensate for signal loss due to rain fade. Included is a discussion of each software module and its applications.

Using CONFIG for Simulation of Operation of Water Recovery Subsystems for Advanced Control Software Evaluation

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Flores, Luis; Fleming, Land; Throop, Daiv

2002-01-01

A hybrid discrete/continuous simulation tool, CONFIG, has been developed to support evaluation of the operability life support systems. CON FIG simulates operations scenarios in which flows and pressures change continuously while system reconfigurations occur as discrete events. In simulations, intelligent control software can interact dynamically with hardware system models. CONFIG simulations have been used to evaluate control software and intelligent agents for automating life support systems operations. A CON FIG model of an advanced biological water recovery system has been developed to interact with intelligent control software that is being used in a water system test at NASA Johnson Space Center

Evaluation of MTANNs for eliminating false-positive with different computer aided pulmonary nodules detection software.

PubMed

Shi, Zhenghao; Ma, Jiejue; Feng, Yaning; He, Lifeng; Suzuki, Kenji

2015-11-01

MTANN (Massive Training Artificial Neural Network) is a promising tool, which applied to eliminate false-positive for thoracic CT in recent years. In order to evaluate whether this method is feasible to eliminate false-positive of different CAD schemes, especially, when it is applied to commercial CAD software, this paper evaluate the performance of the method for eliminating false-positives produced by three different versions of commercial CAD software for lung nodules detection in chest radiographs. Experimental results demonstrate that the approach is useful in reducing FPs for different computer aided lung nodules detection software in chest radiographs.

Minnesota Land Management Information Center

NASA Technical Reports Server (NTRS)

Nordstrand, E. A.

1981-01-01

A brief history of the Minnesota Land Management Information Center is given and the present operational status and plans for future development are described. The incorporation of LANDSAT data into the system, hardware and software capabilities, and funding are addressed.

EU-US standards harmonization task group report : status of ITS security standards.

DOT National Transportation Integrated Search

1998-07-01

This document assembles best practices and presents practical advice on how to acquire the software components of Intelligent Transportation Systems (ITS). The intended audience is the customers--project leaders, technical contract managers, de...

State remote sensing (LANDSAT) programs catalog

NASA Technical Reports Server (NTRS)

1981-01-01

This directory lists the technical capabilities, personnel, and program structure for remote sensing activities as they existed in each state in late 1980. The institutional framework, participating agencies, applications, status, equipment, software, and funding sources are also indicated.

MI1AENG1

Atmospheric Science Data Center

2014-09-03

MI1AENG1 MISR Level 1A Engineering Data File Type 1: Reformatted Annotated Level 1A product for the camera engineering data, which represents indicators of sampled measurements. ... Status Production Report Read Software Files :  Data Product Specification Versioning ...

Xenon International Automated Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

2016-08-05

The Xenon International Automated Control software monitors, displays status, and allows for manual operator control as well as fully automatic control of multiple commercial and PNNL designed hardware components to generate and transmit atmospheric radioxenon concentration measurements every six hours.

Software metrics: The key to quality software on the NCC project

NASA Technical Reports Server (NTRS)

Burns, Patricia J.

1993-01-01

Network Control Center (NCC) Project metrics are captured during the implementation and testing phases of the NCCDS software development lifecycle. The metrics data collection and reporting function has interfaces with all elements of the NCC project. Close collaboration with all project elements has resulted in the development of a defined and repeatable set of metrics processes. The resulting data are used to plan and monitor release activities on a weekly basis. The use of graphical outputs facilitates the interpretation of progress and status. The successful application of metrics throughout the NCC project has been instrumental in the delivery of quality software. The use of metrics on the NCC Project supports the needs of the technical and managerial staff. This paper describes the project, the functions supported by metrics, the data that are collected and reported, how the data are used, and the improvements in the quality of deliverable software since the metrics processes and products have been in use.

Usability Prediction & Ranking of SDLC Models Using Fuzzy Hierarchical Usability Model

NASA Astrophysics Data System (ADS)

Gupta, Deepak; Ahlawat, Anil K.; Sagar, Kalpna

2017-06-01

Evaluation of software quality is an important aspect for controlling and managing the software. By such evaluation, improvements in software process can be made. The software quality is significantly dependent on software usability. Many researchers have proposed numbers of usability models. Each model considers a set of usability factors but do not cover all the usability aspects. Practical implementation of these models is still missing, as there is a lack of precise definition of usability. Also, it is very difficult to integrate these models into current software engineering practices. In order to overcome these challenges, this paper aims to define the term `usability' using the proposed hierarchical usability model with its detailed taxonomy. The taxonomy considers generic evaluation criteria for identifying the quality components, which brings together factors, attributes and characteristics defined in various HCI and software models. For the first time, the usability model is also implemented to predict more accurate usability values. The proposed system is named as fuzzy hierarchical usability model that can be easily integrated into the current software engineering practices. In order to validate the work, a dataset of six software development life cycle models is created and employed. These models are ranked according to their predicted usability values. This research also focuses on the detailed comparison of proposed model with the existing usability models.

Methodology of functionality selection for water management software and examples of its application.

PubMed

Vasilyev, K N

2013-01-01

When developing new software products and adapting existing software, project leaders have to decide which functionalities to keep, adapt or develop. They have to consider that the cost of making errors during the specification phase is extremely high. In this paper a formalised approach is proposed that considers the main criteria for selecting new software functions. The application of this approach minimises the chances of making errors in selecting the functions to apply. Based on the work on software development and support projects in the area of water resources and flood damage evaluation in economic terms at CH2M HILL (the developers of the flood modelling package ISIS), the author has defined seven criteria for selecting functions to be included in a software product. The approach is based on the evaluation of the relative significance of the functions to be included into the software product. Evaluation is achieved by considering each criterion and the weighting coefficients of each criterion in turn and applying the method of normalisation. This paper includes a description of this new approach and examples of its application in the development of new software products in the are of the water resources management.

U.S. Army Armament Research, Development and Engineering Center Grain Evaluation Software to Numerically Predict Linear Burn Regression for Solid Propellant Grain Geometries

DTIC Science & Technology

2017-10-01

ENGINEERING CENTER GRAIN EVALUATION SOFTWARE TO NUMERICALLY PREDICT LINEAR BURN REGRESSION FOR SOLID PROPELLANT GRAIN GEOMETRIES Brian...author(s) and should not be construed as an official Department of the Army position, policy, or decision, unless so designated by other documentation...U.S. ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER GRAIN EVALUATION SOFTWARE TO NUMERICALLY PREDICT LINEAR BURN REGRESSION FOR SOLID

HRVanalysis: A Free Software for Analyzing Cardiac Autonomic Activity

PubMed Central

Pichot, Vincent; Roche, Frédéric; Celle, Sébastien; Barthélémy, Jean-Claude; Chouchou, Florian

2016-01-01

Since the pioneering studies of the 1960s, heart rate variability (HRV) has become an increasingly used non-invasive tool for examining cardiac autonomic functions and dysfunctions in various populations and conditions. Many calculation methods have been developed to address these issues, each with their strengths and weaknesses. Although, its interpretation may remain difficult, this technique provides, from a non-invasive approach, reliable physiological information that was previously inaccessible, in many fields including death and health prediction, training and overtraining, cardiac and respiratory rehabilitation, sleep-disordered breathing, large cohort follow-ups, children's autonomic status, anesthesia, or neurophysiological studies. In this context, we developed HRVanalysis, a software to analyse HRV, used and improved for over 20 years and, thus, designed to meet laboratory requirements. The main strength of HRVanalysis is its wide application scope. In addition to standard analysis over short and long periods of RR intervals, the software allows time-frequency analysis using wavelet transform as well as analysis of autonomic nervous system status on surrounding scored events and on preselected labeled areas. Moreover, the interface is designed for easy study of large cohorts, including batch mode signal processing to avoid running repetitive operations. Results are displayed as figures or saved in TXT files directly employable in statistical softwares. Recordings can arise from RR or EKG files of different types such as cardiofrequencemeters, holters EKG, polygraphs, and data acquisition systems. HRVanalysis can be downloaded freely from the Web page at: https://anslabtools.univ-st-etienne.fr HRVanalysis is meticulously maintained and developed for in-house laboratory use. In this article, after a brief description of the context, we present an overall view of HRV analysis and we describe the methodological approach of the different techniques provided by the software. PMID:27920726

[Comparison among various software for LMS growth curve fitting methods].

PubMed

Han, Lin; Wu, Wenhong; Wei, Qiuxia

2015-03-01

To explore the methods to realize the growth curve fitting of coefficients of skewness-median-coefficient of variation (LMS) using different software, and to optimize growth curve statistical method for grass-root child and adolescent staffs. Regular physical examination data of head circumference for normal infants aging 3, 6, 9 and 12 months in Baotou City were analyzed. Statistical software such as SAS, R, STATA and SPSS were used to fit the LMS growth curve and the results were evaluated upon the user 's convenience, study circle, user interface, results display forms, software update and maintenance and so on. Growth curve fitting results showed the same calculation outcome and each of statistical software had its own advantages and disadvantages. With all the evaluation aspects in consideration, R software excelled others in LMS growth curve fitting. R software have the advantage over other software in grass roots child and adolescent staff.

Common Data Acquisition Systems (DAS) Software Development for Rocket Propulsion Test (RPT) Test Facilities - A General Overview

NASA Technical Reports Server (NTRS)

Hebert, Phillip W., Sr.; Hughes, Mark S.; Davis, Dawn M.; Turowski, Mark P.; Holladay, Wendy T.; Marshall, PeggL.; Duncan, Michael E.; Morris, Jon A.; Franzl, Richard W.

2012-01-01

The advent of the commercial space launch industry and NASA's more recent resumption of operation of Stennis Space Center's large test facilities after thirty years of contractor control resulted in a need for a non-proprietary data acquisition system (DAS) software to support government and commercial testing. The software is designed for modularity and adaptability to minimize the software development effort for current and future data systems. An additional benefit of the software's architecture is its ability to easily migrate to other testing facilities thus providing future commonality across Stennis. Adapting the software to other Rocket Propulsion Test (RPT) Centers such as MSFC, White Sands, and Plumbrook Station would provide additional commonality and help reduce testing costs for NASA. Ultimately, the software provides the government with unlimited rights and guarantees privacy of data to commercial entities. The project engaged all RPT Centers and NASA's Independent Verification & Validation facility to enhance product quality. The design consists of a translation layer which provides the transparency of the software application layers to underlying hardware regardless of test facility location and a flexible and easily accessible database. This presentation addresses system technical design, issues encountered, and the status of Stennis' development and deployment.

Evaluation of a Multicolor, Single-Tube Technique To Enumerate Lymphocyte Subpopulations▿

PubMed Central

Colombo, F.; Cattaneo, A.; Lopa, R.; Portararo, P.; Rebulla, P.; Porretti, L.

2008-01-01

To evaluate the fully automated FACSCanto software, we compared lymphocyte subpopulation counts obtained using three-color FACSCalibur-CELLQuest and six-color FACSCanto-FACSCanto software techniques. High correlations were observed between data obtained with these techniques. Our study indicated that FACSCanto clinical software is accurate and sensitive in single-platform lymphocyte immunophenotyping. PMID:18448621

Designing Online Software for Teaching the Concept of Variable That Facilitates Mental Interaction with the Material: Systemic Approach

ERIC Educational Resources Information Center

Koehler, Natalya A.; Thompson, Ann D.; Correia, Ana-Paula; Hagedorn, Linda Serra

2015-01-01

Our case study is a response to the need for research and reporting on specific strategies employed by software designers to produce effective multimedia instructional solutions. A systemic approach for identifying appropriate software features and conducting a formative evaluation that evaluates both the overall effectiveness of the multimedia…

Software Organization in Student Data Banks for Research and Evaluation: Four Institutional Models.

ERIC Educational Resources Information Center

Friedman, Charles P.

Student data banks for ongoing research and evaluation have been implemented by a number of professional schools. Institutions selecting software designs for the establishment of such systems are often faced with making their choice before all the possible uses of the system are determined. Making software design decisions involves "rational"…

Estimate of the Potential Costs and Effectiveness of Scaling Up CRESST Assessment Software.

ERIC Educational Resources Information Center

Chung, Gregory K. W. K.; Herl, Howard E.; Klein, Davina C. D.; O'Neil, Harold F., Jr.; Schacter, John

This report examines issues in the scale-up of assessment software from the Center for Research on Evaluation, Standards, and Student Testing (CRESST). "Scale-up" is used in a metaphorical sense, meaning adding new assessment tools to CRESST's assessment software. During the past several years, CRESST has been developing and evaluating a…

The HERSCHEL/PACS early Data Products

NASA Astrophysics Data System (ADS)

Wieprecht, E.; Wetzstein, M.; Huygen, R.; Vandenbussche, B.; De Meester, W.

2006-07-01

ESA's Herschel Space Observatory to be launched in 2007, is the first space observatory covering the full far-infrared and submillimeter wavelength range (60 - 670 microns). The Photodetector Array Camera & Spectrometer (PACS) is one of the three science instruments. It contains two Ge:Ga photoconductor arrays and two bolometer arrays to perform imaging line spectroscopy and imaging photometry in the 60 - 210 micron wavelength band. The HERSCHEL ground segment (Herschel Common Science System - HCSS) is implemented using JAVA technology and written in a common effort by the HERSCHEL Science Center and the three instrument teams. The PACS Common Software System (PCSS) is based on the HCSS and used for the online and offline analysis of PACS data. For telemetry bandwidth reasons PACS science data are partially processed on board, compressed, cut into telemetry packets and transmitted to the ground. These steps are instrument mode dependent. We will present the software model which allows to reverse the discrete on board processing steps and evaluate the data. After decompression and reconstruction the detector data and instrument status information are organized in two main PACS Products. The design of these JAVA classes considers the individual sampling rates, data formats, memory and performance optimization aspects and comfortable user interfaces.

The in-plant evaluation of a uranium NDA system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sprinkle, J.K. Jr.; Baxman, H.R.; Langner, D.G.

1979-12-31

The Los Alamos Scientific Laboratory has an unirradiated enriched uranium reprocessing facility. Various types of solutions are generated in this facility, including distillates and raffinates containing ppm of uranium and concentrated solutions with up to 400 grams U/t. In addition to uranyl nitrate and HNO{sub 3}, the solutions may also contain zirconium, niobium, fluoride, and small amounts of many metals. A uranium solution assay system (USAS) has been installed to allow accurate and more timely process control, accountability, and criticality data to be obtained. The USAS assays are made by a variety of techniques that depend upon state-of-the-art high-resolution Ge(Li)more » gamma-ray spectroscopy integrated with an interactive, user-oriented computer software package. Tight control of the system`s performance is maintained by constantly monitoring the USAS status. Daily measurement control sequences are required, and the user is forced by the software to perform these sequences. Routine assays require 400 or 1000 seconds for a precision of 0.5% over the concentration range of 5--400 g/t. A comparison of the USAS precision and accuracy with that obtained by traditional destructive analytical chemistry techniques (colorimetric and volumetric) is presented.« less

The in-plant evaluation of a uranium NDA system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sprinkle, J.K. Jr.; Baxman, H.R.; Langner, D.G.

1979-01-01

The Los Alamos Scientific Laboratory has an unirradiated enriched uranium reprocessing facility. Various types of solutions are generated in this facility, including distillates and raffinates containing ppm of uranium and concentrated solutions with up to 400 grams U/t. In addition to uranyl nitrate and HNO{sub 3}, the solutions may also contain zirconium, niobium, fluoride, and small amounts of many metals. A uranium solution assay system (USAS) has been installed to allow accurate and more timely process control, accountability, and criticality data to be obtained. The USAS assays are made by a variety of techniques that depend upon state-of-the-art high-resolution Ge(Li)more » gamma-ray spectroscopy integrated with an interactive, user-oriented computer software package. Tight control of the system's performance is maintained by constantly monitoring the USAS status. Daily measurement control sequences are required, and the user is forced by the software to perform these sequences. Routine assays require 400 or 1000 seconds for a precision of 0.5% over the concentration range of 5--400 g/t. A comparison of the USAS precision and accuracy with that obtained by traditional destructive analytical chemistry techniques (colorimetric and volumetric) is presented.« less

Measures and metrics for software development

NASA Technical Reports Server (NTRS)

1984-01-01

The evaluations of and recommendations for the use of software development measures based on the practical and analytical experience of the Software Engineering Laboratory are discussed. The basic concepts of measurement and system of classification for measures are described. The principal classes of measures defined are explicit, analytic, and subjective. Some of the major software measurement schemes appearing in the literature are derived. The applications of specific measures in a production environment are explained. These applications include prediction and planning, review and assessment, and evaluation and selection.

Diabetes care may be improved with Steno Quality Assurance Tool--a self-assessment tool in diabetes management.

PubMed

Bjerre-Christensen, Ulla; Nielsen, Annemette Anker; Binder, Christian; Hansen, Jes B; Eldrup, Ebbe

2014-08-01

To evaluate if improvements in the quality of diabetes care in Indian clinics can be obtained by simple self-surveillance PC-based software. Nineteen Indian diabetes clinics were introduced to the principles of quality assurance (QA), and to a software program, the Steno Quality Assurance Tool (SQAT). Data was entered for an initial 3 months period. Subsequently data were analyzed by the users, who designed plans to improve indicator status and set goals for the upcoming period. A second data entry period followed after 7-9 months. QA data was analyzed from 4487 T2DM patients (baseline) and 4440 (follow-up). The average examination frequency per clinic of the following indicators increased significantly: lipid examination (72-87%) (p=0.007), foot examination (80-94%) (p=0.02), HbA1c investigation (59-77%) (p=0.006), and urine albumin excretion investigation (72-87%) (p=0.006). Outcome parameters also improved significantly: mean (SD) fasting and post prandial BG reduced from 144(16) to 132(16)mg/dl (p=0.02) and 212(24)-195(29)mg/dl (p=0.03), respectively. Systolic BP reduced from 139(6) to 133(4) (p=0.0008)mmHg and diastolic BP from 83(3) to 81(3)mmHg (p=0.002). Quality of diabetes care can be improved by applying SQAT, a QA self-surveillance software that enables documentation of changes in process and outcome indicators. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Performance evaluation of various classifiers for color prediction of rice paddy plant leaf

NASA Astrophysics Data System (ADS)

Singh, Amandeep; Singh, Maninder Lal

2016-11-01

The food industry is one of the industries that uses machine vision for a nondestructive quality evaluation of the produce. These quality measuring systems and softwares are precalculated on the basis of various image-processing algorithms which generally use a particular type of classifier. These classifiers play a vital role in making the algorithms so intelligent that it can contribute its best while performing the said quality evaluations by translating the human perception into machine vision and hence machine learning. The crop of interest is rice, and the color of this crop indicates the health status of the plant. An enormous number of classifiers are available to solve the purpose of color prediction, but choosing the best among them is the focus of this paper. Performance of a total of 60 classifiers has been analyzed from the application point of view, and the results have been discussed. The motivation comes from the idea of providing a set of classifiers with excellent performance and implementing them on a single algorithm for the improvement of machine vision learning and, hence, associated applications.

Design and development of control unit and software for the ADFOSC instrument of the 3.6 m Devasthal optical telescope

NASA Astrophysics Data System (ADS)

Kumar, T. S.

2016-08-01

In this paper, we describe the details of control unit and GUI software for positioning two filter wheels, a slit wheel and a grism wheel in the ADFOSC instrument. This is a first generation instrument being built for the 3.6 m Devasthal optical telescope. The control hardware consists of five electronic boards based on low cost 8-bit PIC microcontrollers and are distributed over I2C bus. The four wheels are controlled by four identical boards which are configured in I2C slave mode while the fifth board acts as an I2C master for sending commands to and receiving status from the slave boards. The master also communicates with the interfacing PC over TCP/IP protocol using simple ASCII commands. For moving the wheels stepper motors along with suitable amplifiers have been employed. Homing after powering ON is achieved using hall effect sensors. By implementing distributed control units having identical design modularity is achieved enabling easier maintenance and upgradation. A GUI based software for commanding the instrument is developed in Microsoft Visual C++. For operating the system during observations the user selects normal mode while the engineering mode is available for offering additional flexibility and low level control during maintenance and testing. A detailed time-stamped log of commands, status and errors are continuously generated. Both the control unit and the software have been successfully tested and integrated with the ADFOSC instrument.

Penile bulb dose and impotence after three-dimensional conformal radiotherapy for prostate cancer on RTOG 9406: Findings from a prospective, multi-institutional, phase I/II dose-escalation study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roach, Mack; Winter, Kathryn; Michalski, Jeffrey M.

2004-12-01

Purpose: To assess the relationship between the dose to the bulb of the penis and the risk of impotence in men treated on Radiation Therapy Oncology Group (RTOG) 9406. Methods and materials: Men enrolled on a Phase I/II dose-escalation study, RTOG 9406, who were reported to be potent at entry and evaluable (n = 158) were selected for inclusion. Follow-up evaluations were scheduled every 3, 4, and 6 months for the first, second, and the third through fifth years, then annually. At each follow-up visit an assessment of potency status was made. Penile structures were defined by a single observermore » blinded to the potency status, using Web-based, on-line software. The dosimetry for penile structures was calculated at the Quality Assurance Center at Washington University and provided to RTOG Statistical Headquarters to determine whether there was a relationship between dose and impotence. Results: Patients whose median penile dose was {>=}52.5 Gy had a greater risk of impotence compared with those receiving <52.5 Gy (p = 0.039). In a multivariate analysis neither age, the dose to the prostate, nor the use of hormonal therapy correlated with the risk of impotence. Conclusions: Dose to the bulb of the penis seems to be associated with the risk of radiation-induced impotence.« less

Health professionals' perceptions of feeding-related quality of life in children with quadriplegic cerebral palsy.

PubMed

Morrow, A M; Quine, S; Craig, J C

2007-09-01

Our aim was to identify the major determinants of feeding-related quality of life (QoL) in children with quadriplegic cerebral palsy (QCP) from the perspective of health professionals to provide a framework for comprehensive clinical evaluation of health status in this group. A trained facilitator conducted five semi-structured focus groups during September and November 2003. Participants were recruited through the two paediatric hospitals in Sydney and community-based services, and included general and specialist paediatricians (n = 18), nurses (n = 15) and allied health professionals (n = 13), with an 80% response rate. All sessions were audio- and videotaped. NVIVO software was used to facilitate thematic analysis of the transcribed audiotapes. Responses clustered into five themes: delivery of health services, parent-child interaction, the child's physical and emotional well-being, and social participation. Participants thought the QoL of child and parent was inseparable. Parent-child interaction, delivery of services and physical well-being were the topics which prompted most participant interaction. These findings did not vary across disciplines. Health professionals identified five domains which provide a framework within which clinicians may comprehensively evaluate the health status of children with QCP and feeding difficulties. These five domains may also be used to inform a new feeding-related QoL instrument for use in this group of patients.

A management system for evaluating the Virginia periodic motor vehicle inspection program : software manual and implementation procedures : final report.

DOT National Transportation Integrated Search

1978-01-01

This report deals with the Periodic Motor Vehicle Inspection Management Evaluation System software documentation and implementation procedures. A companion report entitled "A Management System for Evaluating the Virginia Periodic Motor Vehicle Inspec...

Designing and evaluation of the teaching quality assessment form from the point of view of the Lorestan University of Medical Sciences students - 2010

PubMed Central

Kamran, Aziz; Zibaei, Mohammed; Mirkaimi, Kamal; Shahnazi, Hussein

2012-01-01

Introduction: Education is basically one of the Universities’ and faculties’ leading missions and duties; its promoted quality will also lead to an elevated educational quality in the University. Teacher assessment can be mentioned as essential for the success of the quality promotion process. This article deals with the designing and evaluation of a teaching quality evaluation form for teachers, from the Lorestan University of Medical Science students’ point of view. Methods: A two-stage, cross-sectional study was conducted on 290 Lorestan University of Medical Science students. First, evaluation priorities were extracted using the Delphi technique in the fifth section, including teaching skills, communication skills, principles of training, and skills assessment. In the second stage, as the priority and importance of each item was evaluated in the fourth Lickert option, sampling was done in few stages. The study instrument was a questionnaire, which included six areas. The first part of the questionnaire was made up of the demographic characteristics and the second part included five evaluation areas that were obtained from the student. The collected data were analyzed using statistical software SPSS-16 and chi-square test, Kruskal-Wallis test. Results: In the areas of teaching skills, mastery of the course, individual characteristics, self-confidence, communication skills, intimate relationship with students, educational principles, rules respecting the beginning and end time of class, skill assessment, and an accurate comprehensive examination at the end of the semester by the students, were chosen as the most important factors. There were significant differences in the majority of expressed comments between the genders and academic status (P < 0.05). Conclusion: Students can properly diagnose the essential factors in teachers’ evaluation, but in item prioritizing they may be partly affected by some factors such as gender, academic status, semester, and academic course. PMID:23555146

Proceedings of the Ninth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1984-01-01

Experiences in measurement, utilization, and evaluation of software methodologies, models, and tools are discussed. NASA's involvement in ever larger and more complex systems, like the space station project, provides a motive for the support of software engineering research and the exchange of ideas in such forums. The topics of current SEL research are software error studies, experiments with software development, and software tools.

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon D.

1991-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is given. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. All materials have been grouped into eight general subject areas for easy reference: The Software Engineering Laboratory; The Software Engineering Laboratory: Software Development Documents; Software Tools; Software Models; Software Measurement; Technology Evaluations; Ada Technology; and Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

A proven approach for more effective software development and maintenance

NASA Technical Reports Server (NTRS)

Pajerski, Rose; Hall, Dana; Sinclair, Craig

1994-01-01

Modern space flight mission operations and associated ground data systems are increasingly dependent upon reliable, quality software. Critical functions such as command load preparation, health and status monitoring, communications link scheduling and conflict resolution, and transparent gateway protocol conversion are routinely performed by software. Given budget constraints and the ever increasing capabilities of processor technology, the next generation of control centers and data systems will be even more dependent upon software across all aspects of performance. A key challenge now is to implement improved engineering, management, and assurance processes for the development and maintenance of that software; processes that cost less, yield higher quality products, and that self-correct for continual improvement evolution. The NASA Goddard Space Flight Center has a unique experience base that can be readily tapped to help solve the software challenge. Over the past eighteen years, the Software Engineering Laboratory within the code 500 Flight Dynamics Division has evolved a software development and maintenance methodology that accommodates the unique characteristics of an organization while optimizing and continually improving the organization's software capabilities. This methodology relies upon measurement, analysis, and feedback much analogous to that of control loop systems. It is an approach with a time-tested track record proven through repeated applications across a broad range of operational software development and maintenance projects. This paper describes the software improvement methodology employed by the Software Engineering Laboratory, and how it has been exploited within the Flight Dynamics Division with GSFC Code 500. Examples of specific improvement in the software itself and its processes are presented to illustrate the effectiveness of the methodology. Finally, the initial findings are given when this methodology was applied across the mission operations and ground data systems software domains throughout Code 500.

Evaluating foodservice software: a suggested approach.

PubMed

Fowler, K D

1986-09-01

In an era of cost containment, the computer has become a viable management tool. Its use in health care has demonstrated accelerated growth in recent years, and a literature review supports an increased trend in this direction. Foodservice, which is a major cost center, is no exception to this predicted trend. Because software has proliferated, foodservice managers and dietitians are experiencing growing concern about how to evaluate the numerous software packages from which to choose. A suggested approach to evaluating software is offered to dietitians and managers alike to lessen the confusion in software selection and to improve the system satisfaction level post-purchase. Steps of the software evaluatory approach include: delineation of goals, assessment of needs, assignment of value weight factors, development of a vendor checklist, survey of vendors by means of the vendor checklist and elimination of inappropriate systems, thorough development of the request for proposal (RFP) for submission to the selected vendors, an analysis of the returned RFPs in terms of system features and cost factors, and selection of the system(s) for implementation.

Social status level and dimension interactively influence person evaluations indexed by P300s.

PubMed

Gyurovski, Ivo; Kubota, Jennifer; Cardenas-Iniguez, Carlos; Cloutier, Jasmin

2018-06-01

Functional neuroimaging research suggests that status-based evaluations may not solely depend on the level of social status but also on the conferred status dimension. However, no reports to date have studied how status level and dimension shape early person evaluations. To explore early status-based person evaluations, event-related brain potential data were collected from 29 participants while they indicated the status level and dimension of faces that had been previously trained to be associated with one of four status types: high moral, low moral, high financial, or low financial. Analysis of the P300 amplitude (previously implicated in social evaluation) revealed an interaction of status level and status dimension such that enhanced P300 amplitudes were observed in response to targets of high financial and low moral status relative to targets of low financial and high moral status. Implications of these findings are discussed in the context of our current understanding of status-based evaluation and, more broadly, of the processes by which person knowledge may shape person perception and evaluation.

Using VASP on the Peregrine System | High-Performance Computing | NREL

Science.gov Websites

Package) is licensed software. The VASP license requires users to be a member of a defined "workgroup . (commercial) Your VASP license ID (if licensed through Vienna), or proof of current licensed status (if

Mission and data operations IBM 360 user's guide

NASA Technical Reports Server (NTRS)

Balakirsky, J.

1973-01-01

The M and DO computer systems are introduced and supplemented. The hardware and software status is discussed, along with standard processors and user libraries. Data management techniques are presented, as well as machine independence, debugging facilities, and overlay considerations.

VLBI Technology Development at SHAO

NASA Technical Reports Server (NTRS)

Zhang, Xiuzhong; Shu, Fengchun; Xiang, Ying; Zhu, Renjie; Xu, Zhijun; Chen, Zhong; Zheng, Weimin; Luo, Jintao; Wu, Yajun

2010-01-01

VLBI technology development made significant progress at SHAO in the last few years. The development status of the Chinese DBBC, the software and FPGA-based correlators, and the new VLBI antenna, as well as VLBI applications are summarized in this paper.

Property and Propriety in the Digital Environment: Towards an Examination Copy License.

ERIC Educational Resources Information Center

Kahin, Brian

1988-01-01

Discussion of copyright issues involving computer software focuses on faculty examination of software for evaluation purposes. Two model examination copy licenses are proposed: one a circulating evaluation copy, for libraries and other centers where individual evaluators are not involved in copying; and one a distributable evaluation copy. (five…

f-treeGC: a questionnaire-based family tree-creation software for genetic counseling and genome cohort studies.

PubMed

Tokutomi, Tomoharu; Fukushima, Akimune; Yamamoto, Kayono; Bansho, Yasushi; Hachiya, Tsuyoshi; Shimizu, Atsushi

2017-07-14

The Tohoku Medical Megabank project aims to create a next-generation personalized healthcare system by conducting large-scale genome-cohort studies involving three generations of local residents in the areas affected by the Great East Japan Earthquake. We collected medical and genomic information for developing a biobank to be used for this healthcare system. We designed a questionnaire-based pedigree-creation software program named "f-treeGC," which enables even less experienced medical practitioners to accurately and rapidly collect family health history and create pedigree charts. f-treeGC may be run on Adobe AIR. Pedigree charts are created in the following manner: 1) At system startup, the client is prompted to provide required information on the presence or absence of children; f-treeGC is capable of creating a pedigree up to three generations. 2) An interviewer fills out a multiple-choice questionnaire on genealogical information. 3) The information requested includes name, age, gender, general status, infertility status, pregnancy status, fetal status, and physical features or health conditions of individuals over three generations. In addition, information regarding the client and the proband, and birth order information, including multiple gestation, custody, multiple individuals, donor or surrogate, adoption, and consanguinity may be included. 4) f-treeGC shows only marriages between first cousins via the overlay function. 5) f-treeGC automatically creates a pedigree chart, and the chart-creation process is visible for inspection on the screen in real time. 6) The genealogical data may be saved as a file in the original format. The created/modified date and time may be changed as required, and the file may be password-protected and/or saved in read-only format. To enable sorting or searching from the database, the file name automatically contains the terms typed into the entry fields, including physical features or health conditions, by default. 7) Alternatively, family histories are collected using a completed foldable interview paper sheet named "f-sheet", which is identical to the questionnaire in f-treeGC. We developed a questionnaire-based family tree-creation software, named f-treeGC, which is fully compliant with international recommendations for standardized human pedigree nomenclature. The present software simplifies the process of collecting family histories and pedigrees, and has a variety of uses, from genome cohort studies or primary care to genetic counseling.

Release of the gPhoton Database of GALEX Photon Events

NASA Astrophysics Data System (ADS)

Fleming, Scott W.; Million, Chase; Shiao, Bernie; Tucker, Michael; Loyd, R. O. Parke

2016-01-01

The GALEX spacecraft surveyed much of the sky in two ultraviolet bands between 2003 and 2013 with non-integrating microchannel plate detectors. The Mikulski Archive for Space Telescopes (MAST) has made more than one trillion photon events observed by the spacecraft available, stored as a 130 TB database, along with an open-source, python-based software package to query this database and create calibrated lightcurves or images from these data at user-defined spatial and temporal scales. In particular, MAST users can now conduct photometry at the intra-visit level (timescales of seconds and minutes). The software, along with the fully populated database, was officially released in Aug. 2015, and improvements to both software functionality and data calibration are ongoing. We summarize the current calibration status of the gPhoton software, along with examples of early science enabled by gPhoton that include stellar flares, AGN, white dwarfs, exoplanet hosts, novae, and nearby galaxies.

[Analysis and spatial description to correlative factors on food hygiene appeal and food poison in restaurants of city zone in Qingdao].

PubMed

Liu, Ying; Guo, Xin-biao; Li, Hai-rong; Yang, Lin-sheng

2006-07-01

To study some factors that affected food poison and appeals in restaurants which were hidden danger on the cards. Data on food hygiene events from 2002 to 2004 in restaurants of 14 blocks which were located in the important city zone of Qingdao were collected and studied. The spatial distribution was conducted by means of Geographic Information System (GIS). Possible factors related to food hygiene events were investigated and analysed by NCSS Data statistics software. information of every block were marked on digitalized map by ARCVIEW3.2a software in order to show the spatial distribution of food hygiene events palpably in different areas in the course of three years. It was showed that air temperature, humidity, sunlight length were the important factors of food poison. Average amount of guests and floating population related to administration level of sanitation, the level of sanitation administration, geography location, business status of restaurants related to their status of food sanitation. This study showed the method that analysed and studied status of food sanitation from different areas by GIS were effective, simple and palpable.

Gis-Based Spatial Statistical Analysis of College Graduates Employment

NASA Astrophysics Data System (ADS)

Tang, R.

2012-07-01

It is urgently necessary to be aware of the distribution and employment status of college graduates for proper allocation of human resources and overall arrangement of strategic industry. This study provides empirical evidence regarding the use of geocoding and spatial analysis in distribution and employment status of college graduates based on the data from 2004-2008 Wuhan Municipal Human Resources and Social Security Bureau, China. Spatio-temporal distribution of employment unit were analyzed with geocoding using ArcGIS software, and the stepwise multiple linear regression method via SPSS software was used to predict the employment and to identify spatially associated enterprise and professionals demand in the future. The results show that the enterprises in Wuhan east lake high and new technology development zone increased dramatically from 2004 to 2008, and tended to distributed southeastward. Furthermore, the models built by statistical analysis suggest that the specialty of graduates major in has an important impact on the number of the employment and the number of graduates engaging in pillar industries. In conclusion, the combination of GIS and statistical analysis which helps to simulate the spatial distribution of the employment status is a potential tool for human resource development research.

A COST EFFECTIVE MULTI-SPECTRAL SCANNER FOR NATURAL GAS DETECTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yudaya Sivathanu; Jongmook Lim; Vinoo Narayanan

The objective of this project is to design, fabricate and field demonstrate a cost effective, multi-spectral scanner for natural gas leak detection in transmission and distribution pipelines. During the first six months of the project, the design for a laboratory version of the multispectral scanner was completed. The optical, mechanical, and electronic design for the scanner was completed. The optical design was analyzed using Zeemax Optical Design software and found to provide sufficiently resolved performance for the scanner. The electronic design was evaluated using a bread board and very high signal to noise ratios were obtained. Fabrication of a laboratorymore » version of the multi-spectral scanner is currently in progress. A technology status report and a research management plan was also completed during the same period.« less

MicroSIFT Courseware Evaluations (88-168).

ERIC Educational Resources Information Center

Holznagel, Donald C., Ed.

This document consists of 81 microcomputer software package evaluations prepared for the MicroSIFT (Microcomputer Software and Information for Teachers) Clearinghouse at the Northwest Regional Educational Laboratory (NWREL) and distributed during 1983 as "sets" 6, 7, and 8. The concise, single-sheet resume describing and evaluating each…

Toward a More Usable Home-Based Video Telemedicine System: A Heuristic Evaluation of the Clinician User Interfaces of Home-Based Video Telemedicine Systems

PubMed Central

Welch, Brandon; Brinda, FNU

2017-01-01

Background Telemedicine is the use of technology to provide and support health care when distance separates the clinical service and the patient. Home-based telemedicine systems involve the use of such technology for medical support and care connecting the patient from the comfort of their homes with the clinician. In order for such a system to be used extensively, it is necessary to understand not only the issues faced by the patients in using them but also the clinician. Objectives The aim of this study was to conduct a heuristic evaluation of 4 telemedicine software platforms—Doxy.me, Polycom, Vidyo, and VSee—to assess possible problems and limitations that could affect the usability of the system from the clinician’s perspective. Methods It was found that 5 experts individually evaluated all four systems using Nielsen’s list of heuristics, classifying the issues based on a severity rating scale. Results A total of 46 unique problems were identified by the experts. The heuristics most frequently violated were visibility of system status and Error prevention amounting to 24% (11/46 issues) each. Esthetic and minimalist design was second contributing to 13% (6/46 issues) of the total errors. Conclusions Heuristic evaluation coupled with a severity rating scale was found to be an effective method for identifying problems with the systems. Prioritization of these problems based on the rating provides a good starting point for resolving the issues affecting these platforms. There is a need for better transparency and a more streamlined approach for how physicians use telemedicine systems. Visibility of the system status and speaking the users’ language are keys for achieving this. PMID:28438724

The Relationship of Severe Early Childhood Caries and Body Mass Index in a Group of 3- to 6-year-old Children in Shiraz.

PubMed

Edalat, A; Abbaszadeh, M; Eesvandi, M; Heidari, A

2014-06-01

Early childhood caries can cause pain, discomfort and also inability to have a healthy nutrition .Malnutrition can be characterized when there is a weight, height, and body mass index (BMI) deficiency. The aim of this study was to evaluate the relationship between the severe early childhood caries (based on the dmft index) and BMI in pre-school children in Shiraz. A descriptive analytical cross-sectional study was enrolled on 202 healthy preschool children with the age range of 3-6 years recruited from the kindergartens of different socio- economical parts of Shiraz, Iran. The Anthropometric measurements, weight and height were evaluated. The Z-scores were calculated employing WHO Anthro software (www.who.int/childgrowth/software/en/ index.html) to elucidate the subject's status on the age- and sex-specific growth chart. Every Child who has received two Z-scores under the normal value (< -2) was considered as abnormal. The relationship between dmft index and BMI was then investigated. The mean of dmft was 4.13. From children with severe early childhood caries, 12.5%were under weight, 5% had height deficiency and 19.5% had BMI deficiency, however, there was no significant relationship between increasing dmft and the height, weight and BMI deficiency. There was not a linear correlation between severe early childhood caries and BMI, height, and weight deficiency. An incidence of 55% was yielded for severe early childhood caries which was an additional finding of this study.

Software For Graphical Representation Of A Network

NASA Technical Reports Server (NTRS)

Mcallister, R. William; Mclellan, James P.

1993-01-01

System Visualization Tool (SVT) computer program developed to provide systems engineers with means of graphically representing networks. Generates diagrams illustrating structures and states of networks defined by users. Provides systems engineers powerful tool simplifing analysis of requirements and testing and maintenance of complex software-controlled systems. Employs visual models supporting analysis of chronological sequences of requirements, simulation data, and related software functions. Applied to pneumatic, hydraulic, and propellant-distribution networks. Used to define and view arbitrary configurations of such major hardware components of system as propellant tanks, valves, propellant lines, and engines. Also graphically displays status of each component. Advantage of SVT: utilizes visual cues to represent configuration of each component within network. Written in Turbo Pascal(R), version 5.0.

Use of SUSA in Uncertainty and Sensitivity Analysis for INL VHTR Coupled Codes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerhard Strydom

2010-06-01

The need for a defendable and systematic Uncertainty and Sensitivity approach that conforms to the Code Scaling, Applicability, and Uncertainty (CSAU) process, and that could be used for a wide variety of software codes, was defined in 2008.The GRS (Gesellschaft für Anlagen und Reaktorsicherheit) company of Germany has developed one type of CSAU approach that is particularly well suited for legacy coupled core analysis codes, and a trial version of their commercial software product SUSA (Software for Uncertainty and Sensitivity Analyses) was acquired on May 12, 2010. This interim milestone report provides an overview of the current status of themore » implementation and testing of SUSA at the INL VHTR Project Office.« less

National meeting to review IPAD status and goals. [Integrated Programs for Aerospace-vehicle Design

NASA Technical Reports Server (NTRS)

Fulton, R. E.

1980-01-01

A joint NASA/industry project called Integrated Programs for Aerospace-vehicle Design (IPAD) is described, which has the goal of raising aerospace-industry productivity through the application of computers to integrate company-wide management of engineering data. Basically a general-purpose interactive computing system developed to support engineering design processes, the IPAD design is composed of three major software components: the executive, data management, and geometry and graphics software. Results of IPAD activities include a comprehensive description of a future representative aerospace vehicle design process and its interface to manufacturing, and requirements and preliminary design of a future IPAD software system to integrate engineering activities of an aerospace company having several products under simultaneous development.

Re-Engineering JPL's Mission Planning Ground System Architecture for Cost Efficient Operations in the 21st Century

NASA Technical Reports Server (NTRS)

Fordyce, Jess

1996-01-01

Work carried out to re-engineer the mission analysis segment of JPL's mission planning ground system architecture is reported on. The aim is to transform the existing software tools, originally developed for specific missions on different support environments, into an integrated, general purpose, multi-mission tool set. The issues considered are: the development of a partnership between software developers and users; the definition of key mission analysis functions; the development of a consensus based architecture; the move towards evolutionary change instead of revolutionary replacement; software reusability, and the minimization of future maintenance costs. The current status and aims of new developments are discussed and specific examples of cost savings and improved productivity are presented.

Food security and nutritional status of children under-five in households affected by HIV and AIDS in Kiandutu informal settlement, Kiambu County, Kenya.

PubMed

Chege, Peter M; Ndungu, Zipporah W; Gitonga, Betty M

2016-07-22

HIV and AIDS affect most the productive people, leading to reduced capacity to either produce food or generate income. Children under-fives are the most vulnerable group in the affected households. There exists minimal information on food security status and its effect on nutritional status of children under-fives in households affected by HIV and AIDS. The aim of this study was to assess food security and nutritional status of children under-five in households affected by HIV and AIDS in Kiandutu informal settlement, Kiambu County. A cross-sectional analytical design was used. A formula by Fisher was used to calculate the desired sample size of 286. Systematic random sampling was used to select the children from a list of identified households affected by HIV. A questionnaire was used to collect data. Focus group discussion (FGD) guides were used to collect qualitative data. Nutri-survey software was used for analysis of nutrient intake while ENA for SMART software for nutritional status. Data were analyzed using SPSS computer software for frequency and means. Qualitative data was coded and summarized to capture the emerging themes Results show that HIV affected the occupation of people with majority being casual laborers (37.3 %), thus affecting the engagement in high income generating activities. Pearson correlation coefficient showed a significant relationship between dietary diversity score and energy intake (r = 0.54 p = 0.044) and intake of vitamin A, iron, and zinc (p < 0.05). A significant relationship was also noted on energy intake and nutritional status (r = 0.78 p = 0.038). Results from FGD noted that HIV status affected the occupation due to stigma and frequent episodes of illness. The main source of food was purchasing (52.7 %). With majority (54.1 %) of the households earning a monthly income less than US$ 65, and most of the income (25.7 %) being used for medication, there was food insecurity as indicated by a mean household dietary diversity score of 3.4 ± 0.2. This together with less number of meals per day (3.26 ± 0.07 SD) led to consumption of inadequate nutrients by 11.4, 73.9, 67.7, and 49.2 % for energy, vitamin A, iron, and zinc, respectively. This resulted to poor nutritional status noted by a prevalence of 9.9 % in wasting. Stunting and underweight was 17.5 and 5.5 %, respectively. Qualitative data shows that the stigma due to HIV affected the occupation and ability to earn income. The research recommends a food-based intervention program among the already malnourished children.

NASA software specification and evaluation system design, part 2

NASA Technical Reports Server (NTRS)

1976-01-01

A survey and analysis of the existing methods, tools and techniques employed in the development of software are presented along with recommendations for the construction of reliable software. Functional designs for software specification language, and the data base verifier are presented.

Evaluation of Optical Disk Jukebox Software.

ERIC Educational Resources Information Center

Ranade, Sanjay; Yee, Fonald

1989-01-01

Discusses software that is used to drive and access optical disk jukeboxes, which are used for data storage. Categories of the software are described, user categories are explained, the design of implementation approaches is discussed, and representative software products are reviewed. (eight references) (LRW)

Air Traffic Control Experimentation and Evaluation with the NASA ATS-6 Satellite : Volume 4. Data Reduction and Analysis Software.

DOT National Transportation Integrated Search

1976-09-01

Software used for the reduction and analysis of the multipath prober, modem evaluation (voice, digital data, and ranging), and antenna evaluation data acquired during the ATS-6 field test program is described. Multipath algorithms include reformattin...

Relationship Between the Remaining Dentin Thickness and Coronal Pulp Status of Decayed Primary Molars

PubMed Central

Berbari, Roula; Fayyad-Kazan, Hussein; Ezzedine, Mohamad; Fayyad-Kazan, Mohammad; Bandon, Daniel; Sfeir, Elia

2017-01-01

Aims and Objectives: The aim of this study was to assess the correlation between the remaining dentin thickness (RDT) in deep decayed primary molars and the inflammatory status and bacterial composition of the corresponding coronal pulp. We hypothesized that RDT could be used as a reference for clinicians in assigning the indication for pulpotomy. Materials and Methods: Pulpotomies were conducted on the cameral pulp of 48 primary molars. Microorganisms, such as Lactobacillus sp., Streptococcus sp., and Prevotella sp., were identified and quantified and levels of tumor necrosis factor-alpha (TNF-α) and interlukin-6 (IL-6) were assessed. The correlation between the pre-operative RDT based on radiographic images and inflammatory-microbial profiles in vitro was evaluated using Spearman's rho correlation coefficient. All data analysis was performed using a statistical software program (SPSS 20.0, SPSS Inc., Chicago, IL, USA). Results: Immunological and microbiological studies revealed elevated levels of TNF-α and IL-6 cytokines, and Lactobacillus sp., Streptococcus sp. and Prevotella sp. in the cameral pulp with an RDT measuring up to 1.1 mm. No significant relationship could be established between RDT, inflammatory status and microbial content of the pulps. Conclusion: The RDT remains a key clinical factor that needs to be assessed when establishing the indication for pulpotomy. Additional parameters that can improve this therapy should be investigated in the future. PMID:29026700

Assessment of dietary intake and mineral status in pregnant women.

PubMed

Kocyłowski, Rafał; Lewicka, Iwona; Grzesiak, Mariusz; Gaj, Zuzanna; Sobańska, Anna; Poznaniak, Joanna; von Kaisenberg, Constantin; Suliburska, Joanna

2018-06-01

To evaluate the dietary intake of pregnant women and their nutritional status of Ca, Mg, Fe, Zn, and Cu, as the nutritional status of pregnant women is an important factor for the proper progression of a pregnancy and the development and health of the foetus. The study was conducted on 108 pregnant women ages 18-42, at 6-32 weeks of gestation. We used a questionnaire and a 24-h recall nutrition interview. Hair samples were taken for testing and the level of each mineral was assessed using atomic absorption spectrometry. The results were analysed using the Dietetyk and Statistica 10 software. Low levels of Fe, Zn, Ca, Mg, vitamin D, and folic acid intake were seen in the pregnant women, with the use of dietary supplements significantly increasing their intake of Fe, Zn, and folic acid. The concentration of zinc and magnesium in the women's hair was shown to be affected by their age and, in the case of magnesium, by the week of pregnancy. It was observed that the diet of pregnant women is characterised by low levels of Fe, Zn, Ca, Mg, vitamin D, and folic acid. Dietary supplementation with vitamins and minerals significantly increases the daily Fe and folic acid intake in pregnant women. The concentration of Zn and Mg in hair depends on the age of pregnant women and Mg level in the hair of women decreases during pregnancy.

Evaluation of the Trajectory Operations Applications Software Task (TOAST). Volume 2: Interview transcripts

NASA Technical Reports Server (NTRS)

Perkins, Sharon; Martin, Andrea; Bavinger, Bill

1990-01-01

The Trajectory Operations Applications Software Task (TOAST) is a software development project whose purpose is to provide trajectory operation pre-mission and real-time support for the Space Shuttle. The purpose of the evaluation was to evaluate TOAST as an Application Manager - to assess current and planned capabilities, compare capabilities to commercially-available off the shelf (COTS) software, and analyze requirements of MCC and Flight Analysis Design System (FADS) for TOAST implementation. As a major part of the data gathering for the evaluation, interviews were conducted with NASA and contractor personnel. Real-time and flight design users, orbit navigation users, the TOAST developers, and management were interviewed. Code reviews and demonstrations were also held. Each of these interviews was videotaped and transcribed as appropriate. Transcripts were edited and are presented chronologically.

[Software for performing a global phenotypic and genotypic nutritional assessment].

PubMed

García de Diego, L; Cuervo, M; Martínez, J A

2013-01-01

The nutritional assessment of a patient needs the simultaneous managing a extensive information and a great number of databases, as both aspects of the process of nutrition and the clinical situation of the patient are analyzed. The introduction of computers in the nutritional area constitutes an extraordinary advance in the administration of nutrition information, providing a complete assessment of nutritional aspects in a quick and easy way. To develop a computer program that can be used as a tool for assessing the nutritional status of the patient, the education of clinical staff, for epidemiological studies and for educational purposes. Based on a computer program which assists the health specialist to perform a full nutritional evaluation of the patient, through the registration and assessment of the phenotypic and genotypic features. The application provides nutritional prognosis based on anthropometric and biochemical parameters, images of states of malnutrition, questionnaires to characterize diseases, diagnostic criteria, identification of alleles associated with the development of specific metabolic illnesses and questionnaires of quality of life, for a custom actuation. The program includes, as part of the nutritional assessment of the patient, food intake analysis, design of diets and promotion of physical activity, introducing food frequency questionnaires, dietary recalls, healthy eating indexes, model diets, fitness tests, and recommendations, recalls and questionnaires of physical activity. A computer program performed under Java Swing, using SQLite database and some external libraries such as JfreeChart for plotting graphs. This brand new designed software is composed of five blocks categorized into ten modules named: Patients, Anthropometry, Clinical History, Biochemistry, Dietary History, Diagnostic (with genetic make up), Quality of life, Physical activity, Energy expenditure and Diets. Each module has a specific function which evaluates a different aspect of the nutritional status of the patient. UNyDIET is a global computer program, customized and upgradeable, easy to use and versatile, aimed to health specialists, medical staff, dietitians, nutritionists, scientists and educators. This tool can be used as a working instrument in programs promoting health, nutritional and clinical assessments as well as in the evaluation of health care quality, in epidemiological studies, in nutrition intervention programs and teaching. Copyright © AULA MEDICA EDICIONES 2013. Published by AULA MEDICA. All rights reserved.

How to choose the right statistical software?-a method increasing the post-purchase satisfaction.

PubMed

Cavaliere, Roberto

2015-12-01

Nowadays, we live in the "data era" where the use of statistical or data analysis software is inevitable, in any research field. This means that the choice of the right software tool or platform is a strategic issue for a research department. Nevertheless, in many cases decision makers do not pay the right attention to a comprehensive and appropriate evaluation of what the market offers. Indeed, the choice still depends on few factors like, for instance, researcher's personal inclination, e.g., which software have been used at the university or is already known. This is not wrong in principle, but in some cases it's not enough at all and might lead to a "dead end" situation, typically after months or years of investments already done on the wrong software. This article, far from being a full and complete guide to statistical software evaluation, aims to illustrate some key points of the decision process and introduce an extended range of factors which can help to undertake the right choice, at least in potential. There is not enough literature about that topic, most of the time underestimated, both in the traditional literature and even in the so called "gray literature", even if some documents or short pages can be found online. Anyhow, it seems there is not a common and known standpoint about the process of software evaluation from the final user perspective. We suggests a multi-factor analysis leading to an evaluation matrix tool, to be intended as a flexible and customizable tool, aimed to provide a clearer picture of the software alternatives available, not in abstract but related to the researcher's own context and needs. This method is a result of about twenty years of experience of the author in the field of evaluating and using technical-computing software and partially arises from a research made about such topics as part of a project funded by European Commission under the Lifelong Learning Programme 2011.

Evaluating Open Source Software for Use in Library Initiatives: A Case Study Involving Electronic Publishing

ERIC Educational Resources Information Center

Samuels, Ruth Gallegos; Griffy, Henry

2012-01-01

This article discusses best practices for evaluating open source software for use in library projects, based on the authors' experience evaluating electronic publishing solutions. First, it presents a brief review of the literature, emphasizing the need to evaluate open source solutions carefully in order to minimize Total Cost of Ownership. Next,…

Designing an External Evaluation of a Large-Scale Software Development Project.

ERIC Educational Resources Information Center

Collis, Betty; Moonen, Jef

This paper describes the design and implementation of the evaluation of the POCO Project, a large-scale national software project in the Netherlands which incorporates the perspective of an evaluator throughout the entire span of the project, and uses the experiences gained from it to suggest an evaluation procedure that could be applied to other…

LevRad software as a tool to learn how to proceed with an evaluation of barriers.

PubMed

Ferreira, C C; Souza, S O

2011-05-30

We developed the software LevRad with the objective of teaching how to proceed in an analysis of barriers shielding against x-rays to minimize the contact of the professional or the student with x-rays and also to prevent wearing out of the x-ray equipment. Some tests of the software were made, and preliminary results indicate that LevRad is efficient as a complementary tool for the development of professionals related to diagnostic radiology. In the case of education, an advantage is gained when the beginner uses the software before his or her first contact with x-ray equipment in locu. The software introduces a basic knowledge about evaluation of barriers, prevents wearing out of the x—ray tube, reinforces teaching of evaluation of barriers, and reduces the collective effective dose by avoiding unnecessary exposures when possible.

Learning from examples - Generation and evaluation of decision trees for software resource analysis

NASA Technical Reports Server (NTRS)

Selby, Richard W.; Porter, Adam A.

1988-01-01

A general solution method for the automatic generation of decision (or classification) trees is investigated. The approach is to provide insights through in-depth empirical characterization and evaluation of decision trees for software resource data analysis. The trees identify classes of objects (software modules) that had high development effort. Sixteen software systems ranging from 3,000 to 112,000 source lines were selected for analysis from a NASA production environment. The collection and analysis of 74 attributes (or metrics), for over 4,700 objects, captured information about the development effort, faults, changes, design style, and implementation style. A total of 9,600 decision trees were automatically generated and evaluated. The trees correctly identified 79.3 percent of the software modules that had high development effort or faults, and the trees generated from the best parameter combinations correctly identified 88.4 percent of the modules on the average.

Enhancement of computer system for applications software branch

NASA Technical Reports Server (NTRS)

Bykat, Alex

1987-01-01

Presented is a compilation of the history of a two-month project concerned with a survey, evaluation, and specification of a new computer system for the Applications Software Branch of the Software and Data Management Division of Information and Electronic Systems Laboratory of Marshall Space Flight Center, NASA. Information gathering consisted of discussions and surveys of branch activities, evaluation of computer manufacturer literature, and presentations by vendors. Information gathering was followed by evaluation of their systems. The criteria of the latter were: the (tentative) architecture selected for the new system, type of network architecture supported, software tools, and to some extent the price. The information received from the vendors, as well as additional research, lead to detailed design of a suitable system. This design included considerations of hardware and software environments as well as personnel issues such as training. Design of the system culminated in a recommendation for a new computing system for the Branch.

Tomcat-Projects_RF

DOE Office of Scientific and Technical Information (OSTI.GOV)

Warrant, Marilyn M.; Garcia, Rudy J.; Zhang, Pengchu

2004-09-15

Tomcat-Projects_RF is a software package for analyzing sensor data obtained from a database and displaying the results with Java Servlet Pages (JSP). SQL Views into the dataset are tailored for personnel having different roles in monitoring the items in a storage facility. For example, an inspector, a host treaty compliance officer, a system engineer and software developers were the users identified that would need to access data at different levels of detail, The analysis provides a high level status of the storage facility and allows the user to go deeper into the data details if the user desires.

Delay Tolerant Networking on NASA's Space Communication and Navigation Testbed

NASA Technical Reports Server (NTRS)

Johnson, Sandra; Eddy, Wesley

2016-01-01

This presentation covers the status of the implementation of an open source software that implements the specifications developed by the CCSDS Working Group. Interplanetary Overlay Network (ION) is open source software and it implements specifications that have been developed by two international working groups through IETF and CCSDS. ION was implemented on the SCaN Testbed, a testbed located on an external pallet on ISS, by the GRC team. The presentation will cover the architecture of the system, high level implementation details, and issues porting ION to VxWorks.

A general software reliability process simulation technique

NASA Technical Reports Server (NTRS)

Tausworthe, Robert C.

1991-01-01

The structure and rationale of the generalized software reliability process, together with the design and implementation of a computer program that simulates this process are described. Given assumed parameters of a particular project, the users of this program are able to generate simulated status timelines of work products, numbers of injected anomalies, and the progress of testing, fault isolation, repair, validation, and retest. Such timelines are useful in comparison with actual timeline data, for validating the project input parameters, and for providing data for researchers in reliability prediction modeling.

Collected software engineering papers, volume 8

NASA Technical Reports Server (NTRS)

1990-01-01

A collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period November 1989 through October 1990 is presented. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography. The seven presented papers are grouped into four major categories: (1) experimental research and evaluation of software measurement; (2) studies on models for software reuse; (3) a software tool evaluation; and (4) Ada technology and studies in the areas of reuse and specification.

School Microware Reviews. Evaluations of Educational Software for Apple, PET, TRS-80, with Index to Evaluations in Other Publications.

ERIC Educational Resources Information Center

School Microware Reviews, 1981

1981-01-01

This document describes the operation and quality of pre-college instructional software sold for use on microcomputers. It also assists in locating other sources of similar information about instructional software. This edition is limited to programs for the Apple II, Commodore PET, and Radio Shack TRS-80 Model I. Fifty reviews of software…

An Evaluation of the Merit Reading Software Program in the Calhoun County (WV) Middle/High School

ERIC Educational Resources Information Center

Jones, Jerry D.; Staats, William D.; Bowling, Noel; Bickel, Robert D.; Cunningham, Michael L.; Cadle, Connie

2005-01-01

We were asked by Merit Software to conduct a quasi-experimental research study to evaluate the effects of its reading software on middle school students. Because the No Child Left Behind Act emphasizes the importance of evidence-based interventions and has set improving students reading comprehension as a goal, we agreed to take on this project.…

Improving lip wrinkles: lipstick-related image analysis.

PubMed

Ryu, Jong-Seong; Park, Sun-Gyoo; Kwak, Taek-Jong; Chang, Min-Youl; Park, Moon-Eok; Choi, Khee-Hwan; Sung, Kyung-Hye; Shin, Hyun-Jong; Lee, Cheon-Koo; Kang, Yun-Seok; Yoon, Moung-Seok; Rang, Moon-Jeong; Kim, Seong-Jin

2005-08-01

The appearance of lip wrinkles is problematic if it is adversely influenced by lipstick make-up causing incomplete color tone, spread phenomenon and pigment remnants. It is mandatory to develop an objective assessment method for lip wrinkle status by which the potential of wrinkle-improving products to lips can be screened. The present study is aimed at finding out the useful parameters from the image analysis of lip wrinkles that is affected by lipstick application. The digital photograph image of lips before and after lipstick application was assessed from 20 female volunteers. Color tone was measured by Hue, Saturation and Intensity parameters, and time-related pigment spread was calculated by the area over vermilion border by image-analysis software (Image-Pro). The efficacy of wrinkle-improving lipstick containing asiaticoside was evaluated from 50 women by using subjective and objective methods including image analysis in a double-blind placebo-controlled fashion. The color tone and spread phenomenon after lipstick make-up were remarkably affected by lip wrinkles. The level of standard deviation by saturation value of image-analysis software was revealed as a good parameter for lip wrinkles. By using the lipstick containing asiaticoside for 8 weeks, the change of visual grading scores and replica analysis indicated the wrinkle-improving effect. As the depth and number of wrinkles were reduced, the lipstick make-up appearance by image analysis also improved significantly. The lip wrinkle pattern together with lipstick make-up can be evaluated by the image-analysis system in addition to traditional assessment methods. Thus, this evaluation system is expected to test the efficacy of wrinkle-reducing lipstick that was not described in previous dermatologic clinical studies.

United States Air Force Hearing Conservation Program, Annual Report for Calendar Year 2016

DTIC Science & Technology

Program (HCP) section prepares an annual status report on the USAF HCP in accordance with Air Force Instruction 48-127, Occupational Noise and Hearing...Conservation Program, Section 2.9.2.17, and Department of Defense Instruction 6055.12, Hearing Conservation Program. This report covers calendar year...covers information regarding software implementation status, HCP effectiveness metrics, to include an overview of a few standard reports currently available in the DOEHRS-HC DR database, and our recommendations.

Development and use of mathematical models and software frameworks for integrated analysis of agricultural systems and associated water use impacts

USGS Publications Warehouse

Fowler, K. R.; Jenkins, E.W.; Parno, M.; Chrispell, J.C.; Colón, A. I.; Hanson, Randall T.

2016-01-01

The development of appropriate water management strategies requires, in part, a methodology for quantifying and evaluating the impact of water policy decisions on regional stakeholders. In this work, we describe the framework we are developing to enhance the body of resources available to policy makers, farmers, and other community members in their e orts to understand, quantify, and assess the often competing objectives water consumers have with respect to usage. The foundation for the framework is the construction of a simulation-based optimization software tool using two existing software packages. In particular, we couple a robust optimization software suite (DAKOTA) with the USGS MF-OWHM water management simulation tool to provide a flexible software environment that will enable the evaluation of one or multiple (possibly competing) user-defined (or stakeholder) objectives. We introduce the individual software components and outline the communication strategy we defined for the coupled development. We present numerical results for case studies related to crop portfolio management with several defined objectives. The objectives are not optimally satisfied for any single user class, demonstrating the capability of the software tool to aid in the evaluation of a variety of competing interests.

Software to Go--And It Goes!

ERIC Educational Resources Information Center

Abrams, Mary; Kurlychek, Ken

1989-01-01

This article describes the Software Evaluation Clearinghouse for Educators of the Hearing Impaired at Gallaudet University (Washington, DC). Software compatible with Apple and IBM hardware is collected, rated by clearinghouse members, and described in a printed catalog. Tips on starting a software lending library are offered. (PB)

The 1989 Educational Software Preview Guide.

ERIC Educational Resources Information Center

Educational Software Evaluation Consortium, Menlo Park, CA.

Developed to help educators locate microcomputer software programs they may want to preview for students in grades K-12, this guide lists commercially available instructional software programs that have been favorably reviewed by members of the Educational Software Evaluation Consortium. Programs are arranged alphabetically by title within…

Specifications for Thesaurus Software.

ERIC Educational Resources Information Center

Milstead, Jessica L.

1991-01-01

Presents specifications for software that is designed to support manual development and maintenance of information retrieval thesauri. Evaluation of existing software and design of custom software is discussed, requirements for integration with larger systems and for the user interface are described, and relationships among terms are discussed.…

Publishing Platform for Scientific Software - Lessons Learned

NASA Astrophysics Data System (ADS)

Hammitzsch, Martin; Fritzsch, Bernadette; Reusser, Dominik; Brembs, Björn; Deinzer, Gernot; Loewe, Peter; Fenner, Martin; van Edig, Xenia; Bertelmann, Roland; Pampel, Heinz; Klump, Jens; Wächter, Joachim

2015-04-01

Scientific software has become an indispensable commodity for the production, processing and analysis of empirical data but also for modelling and simulation of complex processes. Software has a significant influence on the quality of research results. For strengthening the recognition of the academic performance of scientific software development, for increasing its visibility and for promoting the reproducibility of research results, concepts for the publication of scientific software have to be developed, tested, evaluated, and then transferred into operations. For this, the publication and citability of scientific software have to fulfil scientific criteria by means of defined processes and the use of persistent identifiers, similar to data publications. The SciForge project is addressing these challenges. Based on interviews a blueprint for a scientific software publishing platform and a systematic implementation plan has been designed. In addition, the potential of journals, software repositories and persistent identifiers have been evaluated to improve the publication and dissemination of reusable software solutions. It is important that procedures for publishing software as well as methods and tools for software engineering are reflected in the architecture of the platform, in order to improve the quality of the software and the results of research. In addition, it is necessary to work continuously on improving specific conditions that promote the adoption and sustainable utilization of scientific software publications. Among others, this would include policies for the development and publication of scientific software in the institutions but also policies for establishing the necessary competencies and skills of scientists and IT personnel. To implement the concepts developed in SciForge a combined bottom-up / top-down approach is considered that will be implemented in parallel in different scientific domains, e.g. in earth sciences, climate research and the life sciences. Based on the developed blueprints a scientific software publishing platform will be iteratively implemented, tested, and evaluated. Thus the platform should be developed continuously on the basis of gained experiences and results. The platform services will be extended one by one corresponding to the requirements of the communities. Thus the implemented platform for the publication of scientific software can be improved and stabilized incrementally as a tool with software, science, publishing, and user oriented features.

Improved alignment evaluation and optimization : final report.

DOT National Transportation Integrated Search

2007-09-11

This report outlines the development of an enhanced highway alignment evaluation and optimization : model. A GIS-based software tool is prepared for alignment optimization that uses genetic algorithms for : optimal search. The software is capable of ...

Determinants of Breast Cancer Screening by Mammography in Women Referred to Health Centers of Urmia, Iran

PubMed

Moghaddam Tabrizi, Fatemeh; Vahdati, Sakineh; Khanahmadi, Shahriar; Barjasteh, Samira

2018-04-25

Background: In women, breast cancer accounts for 30 percent of all cancers and it is the second leading cause of mortality. Mammography is considered an effective procedure to detect early breast cancer recommended by World Health Organization. This study was aimed to evaluate breast cancer screening determinants in women referred to health centers of Urmia for mammography in 2017. Materials and Methods: In this descriptive-analytic cross-sectional study, 348 women referred to health centers of Urmia were selected using multistage sampling. Data were collected using a standard questionnaire for mammography screening determinants, with a checklist including demographic characteristics, family, social and economic factors and midwifery background. Analysis was with SPSS software version 20for descriptive and inferential statistic tests, P<0.05 being considered significant. Results: The proportion performing mammography was 12%. Significant relationships were noted with income, menopause status, a history of breast cancer in close relatives, beliefs, inaccessibility, knowledge, cues to action, emotions, self-care, and life priorities (P<0.05). There were no significant links with age at marriage, first age of delivery, number of children, duration of breastfeeding, status of residency, education, marital status, occupation, history of breastfeeding, and previous breast problems (P>0.05). Conclusions: The findings of this study showed that the status of breast cancer screening in participating women was not satisfactory. Therefore, promotion of screening methods by health policy makers in Iran is necessary and given that reliance solely on education is not sufficient, it is essential to pay attention to barriers and eliminate them. Creative Commons Attribution License

SMC Message Browser Projects

NASA Technical Reports Server (NTRS)

Wichmann, Benjamin C.

2013-01-01

I work directly with the System Monitoring and Control (SMC) software engineers who develop, test and release custom and commercial software in support of the Kennedy Space Center Spaceport Command and Control System. (SCCS). SMC uses Commercial Off-The-Shelf (COTS) Enterprise Management Systems (EMS) software which provides a centralized subsystem for configuring, monitoring, and controlling SCCS hardware and software used in the Control Rooms. There are multiple projects being worked on using the COTS EMS software. I am currently working with the HP Operations Manager for UNIX (OMU) software which allows Master Console Operators (MCO) to access, view and interpret messages regarding the status of the SCCS hardware and software. The OMU message browser gets cluttered with messages which can make it difficult for the MCO to manage. My main project involves determining ways to reduce the number of messages being displayed in the OMU message browser. I plan to accomplish this task in two different ways: (1) by correlating multiple messages into one single message being displayed and (2) to create policies that will determine the significance of each message and whether or not it needs to be displayed to the MCO. The core idea is to lessen the number of messages being sent to the OMU message browser so the MCO can more effectively use it.

Software solutions manage the definition, operation, maintenance and configuration control of the National Ignition Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dobson, D; Churby, A; Krieger, E

2011-07-25

The National Ignition Facility (NIF) is the world's largest laser composed of millions of individual parts brought together to form one massive assembly. Maintaining control of the physical definition, status and configuration of this structure is a monumental undertaking yet critical to the validity of the shot experiment data and the safe operation of the facility. The NIF business application suite of software provides the means to effectively manage the definition, build, operation, maintenance and configuration control of all components of the National Ignition Facility. State of the art Computer Aided Design software applications are used to generate a virtualmore » model and assemblies. Engineering bills of material are controlled through the Enterprise Configuration Management System. This data structure is passed to the Enterprise Resource Planning system to create a manufacturing bill of material. Specific parts are serialized then tracked along their entire lifecycle providing visibility to the location and status of optical, target and diagnostic components that are key to assessing pre-shot machine readiness. Nearly forty thousand items requiring preventive, reactive and calibration maintenance are tracked through the System Maintenance & Reliability Tracking application to ensure proper operation. Radiological tracking applications ensure proper stewardship of radiological and hazardous materials and help provide a safe working environment for NIF personnel.« less

Evaluation of expert systems - An approach and case study. [of determining software functional requirements for command management of satellites

NASA Technical Reports Server (NTRS)

Liebowitz, J.

1985-01-01

Techniques that were applied in defining an expert system prototype for first-cut evaluations of the software functional requirements of NASA satellite command management activities are described. The prototype was developed using the Knowledge Engineering System. Criteria were selected for evaluating the satellite software before defining the expert system prototype. Application of the prototype system is illustrated in terms of the evaluation procedures used with the COBE satellite to be launched in 1988. The limited number of options which can be considered by the program mandates that biases in the system output must be well understood by the users.

The 1990-91 Educational Software Preview Guide.

ERIC Educational Resources Information Center

Best, Anita, Ed.; And Others

Developed to help educators locate microcomputer software programs they may want to preview for students in grades K-12, this guide lists commercially available microcomputer software programs that have been favorably reviewed by members of the Educational Software Evaluation Consortium. Programs are arranged alphabetically by title within…

Evaluating software development characteristics: Assessment of software measures in the Software Engineering Laboratory. [reliability engineering

NASA Technical Reports Server (NTRS)

Basili, V. R.

1981-01-01

Work on metrics is discussed. Factors that affect software quality are reviewed. Metrics is discussed in terms of criteria achievements, reliability, and fault tolerance. Subjective and objective metrics are distinguished. Product/process and cost/quality metrics are characterized and discussed.

NERSC News

Science.gov Websites

Performance Data, Analytics & Services Job Logs & Statistics Training & Tutorials Software Outages NERSC Training Spectrum Scale User Group Meeting Live Status Now Computing Queue Look MOTD » Deep Learning at 15 PFlops Enables Training for Extreme Weather Identification at Scale March 29, 2018

The Virginia Tech Library System (VTLS).

ERIC Educational Resources Information Center

McGrath, Deborah Hall; Lee, Carl R.

1989-01-01

Discusses topics relating to the Virginia Tech Library System: the company (VTLS, Inc.); the software; data structure; cataloging, status, and authority control; circulation; serials control and acquisitions; the online catalog; management reporting; networking; and the operating environment. Sidebars discuss the Vanilla Network; LINNEA--a network…

High-power transmitter automation, part 2

NASA Technical Reports Server (NTRS)

Gregg, M. A.

1981-01-01

The current status of the transmitter automation development is reported. The work described is applicable to all transmitters in the Deep Space Network. New interface and software designs are described which improve reliability and reduce the time required for subsystem turn on and klystron saturation.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Buhler, Melanie; Valett, Jon

1989-01-01

An annotated bibliography is presented of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. The bibliography was updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials were grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. Subject and author indexes further classify these documents by specific topic and individual author.

Orbiter subsystem hardware/software interaction analysis. Volume 8: AFT reaction control system, part 2

NASA Technical Reports Server (NTRS)

Becker, D. D.

1980-01-01

The orbiter subsystems and interfacing program elements which interact with the orbiter computer flight software are analyzed. The failure modes identified in the subsystem/element failure mode and effects analysis are examined. Potential interaction with the software is examined through an evaluation of the software requirements. The analysis is restricted to flight software requirements and excludes utility/checkout software. The results of the hardware/software interaction analysis for the forward reaction control system are presented.

Migrating data from TcSE to DOORS : an evaluation of the T-Plan Integrator software application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Post, Debra S.; Manzanares, David A.; Taylor, Jeffrey L.

2011-02-01

This report describes our evaluation of the T-Plan Integrator software application as it was used to transfer a real data set from the Teamcenter for Systems Engineering (TcSE) software application to the DOORS software application. The T-Plan Integrator was evaluated to determine if it would meet the needs of Sandia National Laboratories to migrate our existing data sets from TcSE to DOORS. This report presents the struggles of migrating data and focuses on how the Integrator can be used to map a data set and its data architecture from TcSE to DOORS. Finally, this report describes how the bulk ofmore » the migration can take place using the Integrator; however, about 20-30% of the data would need to be transferred from TcSE to DOORS manually. This report does not evaluate the transfer of data from DOORS to TcSE.« less

Evaluating Software Assurance Knowledge and Competency of Acquisition Professionals

DTIC Science & Technology

2014-10-01

of ISO 12207 -2008, both internationally and in the United States [7]. That standard documents a comprehensive set of activities and supporting...grows, organizations must ensure that their procurement agents acquire high quality, secure software. ISO 12207 and the Software Assurance Competency...cyberattacks grows, organizations must ensure that their procurement agents acquire high quality, secure software. ISO 12207 and the Software Assurance

Relationship between Autonomic Markers of Heart Rate and Subjective Indicators of Recovery Status in Male, Elite Badminton Players.

PubMed

Bisschoff, Christo A; Coetzee, Ben; Esco, Michael R

2016-12-01

The primary aim of the study was to determine if heart rate variability (HRV), and heart rate recovery (HRR) are related to several subjective indicators of recovery status (muscle soreness, hydration status, sleep quality and quantity as well as pre-competition mood states) for different match periods in male, elite, African, singles badminton players. HRV and HRR were measured in twenty-two badminton players before (pre-match), during (in-match), after (post-match) and during rest periods (in-match rest) of 46 national and international matches. Muscle soreness, hydration status, and sleep quality and quantity were measured on a daily basis whereas mood states were measured just before each match via questionnaires. Prior to each match warm-up, players were fitted with a Fix Polar Heart Rate Transmitter Belt to record heart rate every second during each match and HRR during service breaks and after matches. Kubios HRV software was used for final HRV analyses from the series of R-R-intervals. A strong, significant canonical correlation (Rc = 0.96, p = 0.014) was found between HRV, HRR and subjective indicators of recovery status for the in-match period, but only strong, non-significant relationships were observed for pre-match (Rc = 0.98, p = 0.626) and post-match periods (Rc = 0.98, p = 0.085) and a low non-significant relationship (Rc = 0.69, p = 0.258) for the in-match rest period. Canonical functions accounted for between 47.89% and 96.43% of the total variation between the two canonical variants. Results further revealed that Ln-HFnu, the energy index and vigour were the most prominent variables in the relationship between the autonomic markers of heart rate and recovery-related variables. In conclusion, this study proved that subjective indicators of recovery status influence HRV and HRR measures obtained in a competitive badminton environment and should therefore be incorporated in protocols that evaluate these ANS-related parameters.

A Roadmap for Using Agile Development in a Traditional Environment

NASA Technical Reports Server (NTRS)

Streiffert, Barbara; Starbird, Thomas; Grenander, Sven

2006-01-01

One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases, they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At the Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and processes for developing software. This paper will discuss some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies and processes.

A Roadmap for Using Agile Development in a Traditional Environment

NASA Technical Reports Server (NTRS)

Streiffert, Barbara A.; Starbird, Thomas; Grenander, Sven

2006-01-01

One of the newer classes of software engineering techniques is called 'Agile Development'. In Agile Development software engineers take small implementation steps and, in some cases they program in pairs. In addition, they develop automatic tests prior to implementing their small functional piece. Agile Development focuses on rapid turnaround, incremental planning, customer involvement and continuous integration. Agile Development is not the traditional waterfall method or even a rapid prototyping method (although this methodology is closer to Agile Development). At Jet Propulsion Laboratory (JPL) a few groups have begun Agile Development software implementations. The difficulty with this approach becomes apparent when Agile Development is used in an organization that has specific criteria and requirements handed down for how software development is to be performed. The work at the JPL is performed for the National Aeronautics and Space Agency (NASA). Both organizations have specific requirements, rules and procedure for developing software. This paper will discuss the some of the initial uses of the Agile Development methodology, the spread of this method and the current status of the successful incorporation into the current JPL development policies.

Evaluation and selection of security products for authentication of computer software

NASA Astrophysics Data System (ADS)

Roenigk, Mark W.

2000-04-01

Software Piracy is estimated to cost software companies over eleven billion dollars per year in lost revenue worldwide. Over fifty three percent of all intellectual property in the form of software is pirated on a global basis. Software piracy has a dramatic effect on the employment figures for the information industry as well. In the US alone, over 130,000 jobs are lost annually as a result of software piracy.

Fostering Multirepresentational Levels of Chemical Concepts: A Framework to Develop Educational Software

ERIC Educational Resources Information Center

Marson, Guilherme A.; Torres, Bayardo B.

2011-01-01

This work presents a convenient framework for developing interactive chemical education software to facilitate the integration of macroscopic, microscopic, and symbolic dimensions of chemical concepts--specifically, via the development of software for gel permeation chromatography. The instructional role of the software was evaluated in a study…

Software design for automated assembly of truss structures

NASA Technical Reports Server (NTRS)

Herstrom, Catherine L.; Grantham, Carolyn; Allen, Cheryl L.; Doggett, William R.; Will, Ralph W.

1992-01-01

Concern over the limited intravehicular activity time has increased the interest in performing in-space assembly and construction operations with automated robotic systems. A technique being considered at LaRC is a supervised-autonomy approach, which can be monitored by an Earth-based supervisor that intervenes only when the automated system encounters a problem. A test-bed to support evaluation of the hardware and software requirements for supervised-autonomy assembly methods was developed. This report describes the design of the software system necessary to support the assembly process. The software is hierarchical and supports both automated assembly operations and supervisor error-recovery procedures, including the capability to pause and reverse any operation. The software design serves as a model for the development of software for more sophisticated automated systems and as a test-bed for evaluation of new concepts and hardware components.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Groves, Paula; Valett, Jon

1990-01-01

An annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory is given. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory-software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. Subject and author indexes further classify these documents by specific topic and individual author.

Annotated bibliography of Software Engineering Laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1993-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: the Software Engineering Laboratory; the Software Engineering Laboratory: software development documents; software tools; software models; software measurement; technology evaluations; Ada technology; and data collection. This document contains an index of these publications classified by individual author.

Autonomous Cryogenic Load Operations: Knowledge-Based Autonomous Test Engineer

NASA Technical Reports Server (NTRS)

Schrading, J. Nicolas

2013-01-01

The Knowledge-Based Autonomous Test Engineer (KATE) program has a long history at KSC. Now a part of the Autonomous Cryogenic Load Operations (ACLO) mission, this software system has been sporadically developed over the past 20 years. Originally designed to provide health and status monitoring for a simple water-based fluid system, it was proven to be a capable autonomous test engineer for determining sources of failure in the system. As part of a new goal to provide this same anomaly-detection capability for a complicated cryogenic fluid system, software engineers, physicists, interns and KATE experts are working to upgrade the software capabilities and graphical user interface. Much progress was made during this effort to improve KATE. A display of the entire cryogenic system's graph, with nodes for components and edges for their connections, was added to the KATE software. A searching functionality was added to the new graph display, so that users could easily center their screen on specific components. The GUI was also modified so that it displayed information relevant to the new project goals. In addition, work began on adding new pneumatic and electronic subsystems into the KATE knowledge base, so that it could provide health and status monitoring for those systems. Finally, many fixes for bugs, memory leaks, and memory errors were implemented and the system was moved into a state in which it could be presented to stakeholders. Overall, the KATE system was improved and necessary additional features were added so that a presentation of the program and its functionality in the next few months would be a success.

Autonomous Cryogenic Load Operations: KSC Autonomous Test Engineer

NASA Technical Reports Server (NTRS)

Shrading, Nicholas J.

2012-01-01

The KSC Autonomous Test Engineer (KATE) program has a long history at KSC. Now a part of the Autonomous Cryogenic Load Operations (ACLO) mission, this software system has been sporadically developed over the past 20+ years. Originally designed to provide health and status monitoring for a simple water-based fluid system, it was proven to be a capable autonomous test engineer for determining sources of failure in. the system, As part.of a new goal to provide this same anomaly-detection capability for a complicated cryogenic fluid system, software engineers, physicists, interns and KATE experts are working to upgrade the software capabilities and graphical user interface. Much progress was made during this effort to improve KATE. A display ofthe entire cryogenic system's graph, with nodes for components and edges for their connections, was added to the KATE software. A searching functionality was added to the new graph display, so that users could easily center their screen on specific components. The GUI was also modified so that it displayed information relevant to the new project goals. In addition, work began on adding new pneumatic and electronic subsystems into the KATE knowledgebase, so that it could provide health and status monitoring for those systems. Finally, many fixes for bugs, memory leaks, and memory errors were implemented and the system was moved into a state in which it could be presented to stakeholders. Overall, the KATE system was improved and necessary additional features were added so that a presentation of the program and its functionality in the next few months would be a success.

User-friendly technology to help family carers cope.

PubMed

Chambers, Mary; Connor, Samantha L

2002-12-01

Increases in the older adult population are occurring simultaneously with a growth in new technology. Modern technology presents an opportunity to enhance the quality of life and independence of older people and their family carers through communication and access to health care information. To evaluate the usability of a multimedia software application designed to provide family carers of the elderly or disabled with information, advice and psychological support to increase their coping capacity. The interactive application consisted of an information-based package that provided carers with advice on the promotion of psychological health, including relaxation and other coping strategies. The software application also included a carer self-assessment instrument, designed to provide both family and professional carers with information to assess how family carers were coping with their care-giving role. Usability evaluation was carried out in two stages. In the first stage (verification), user trials and an evaluation questionnaire were used to refine and develop the content and usability of the multimedia software application. In the second (demonstration), stage evaluation questionnaires were used to appraise the usability of the modified software application. The findings evidenced that the majority of users found the software to be usable and informative. Some areas were highlighted for improvement in the navigation of the software. The authors conclude that with further refinement, the software application has the potential to offer information and support to those who are caring for the elderly and disabled at home.

Organ transplant tissue rejection: detection and staging by fluorescence spectroscopy

NASA Astrophysics Data System (ADS)

MacAulay, Calum E.; Whitehead, Peter D.; McManus, Bruce; Zeng, Haishan; Wilson-McManus, Janet; MacKinnon, Nick; Morgan, David C.; Dong, Chunming; Gerla, Paul; Kenyon, Jennifer

1998-07-01

Patients receiving heart or other organ transplants usually require some level of anti-rejection drug therapy, most commonly cyclosporine. The rejection status of the organ must be monitored to determine the optimal anti-rejection drug therapy. The current method for monitoring post-transplant rejection status of heart transplant patients consists of taking biopsies from the right ventricle. In this work we have developed a system employing optical and signal-processing techniques that will allow a cardiologist to measure spectral changes associated with tissue rejection using an optical catheter probe. The system employs time gated illumination and detection systems to deal with the dynamic signal acquisition problems associated with in vivo measurements of a beating heart. Spectral data processing software evaluates and processes the data to produce a simple numerical score. Results of measurements made on 100 excised transplanted isograft and allograft rat hearts have demonstrated the ability of the system to detect the presence of rejection and to accurately correlate the spectroscopic results with the ISHLT (International Society for Heart and Lung Transplantation) stage of rejection determined by histopathology. In vivo measurements using a pig transplant model are now in process.

INFLUENCE OF SOCIO-ECONOMIC AND DEMOGRAPHIC FACTORS, FEEDING AND PHYSICAL ACTIVITY ON NUTRITIONAL STATUS OF 8-15-YEAR-OLD BULGARIAN CHILDREN AND ADOLESCENTS: PRELIMINARY RESULTS.

PubMed

Mladenova, Silviya; Andreenko, Emiliya

2015-12-01

to study of impact of some socio-economic and demographic factors, feeding and physical activity on the prevalence of overweight, obesity and underweight among Bulgarian children and adolescents. the sample of this research included 881 children and adolescents from both sexes, aged from 8 to 15 years, that were measured transversally in the period 2012- 2014 in eight government school in Smolyan region, Bulgaria. Of each child the height and weight were measured and body mass index (BMI) were calculated. The evaluation of nutritional status was made using the IOTF cut-off points of BMI for children and adolescents. By the questionnaire the information about educational level of parents, number of children in the family, place of residence, nutrition and feeding habits and physical activity of children and adolescents were collected. The data were analyzed by software Statistica 10.0. there is a significant positive relation between the factor ''overeating" and the BMI values for both sexes and a negative relation between the factor ''meals frequency" and BMI for boys (p. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Effect of restricted protein diet supplemented with keto analogues in end-stage renal disease: a systematic review and meta-analysis.

PubMed

Jiang, Zheng; Tang, Yi; Yang, Lichuan; Mi, Xuhua; Qin, Wei

2018-04-01

To evaluate the efficacy and safety of the restricted protein diet supplemented with keto analogues when applied in end-stage renal disease (ESRD). The Cochrane Library, PubMed, Embase, CBM and CENTRAL databases were searched and reviewed up to January 2017. Clinical trials were analyzed using RevMan 5.3 software. Five randomized controlled trials were selected and included in this study according to our inclusion and exclusion criteria. Changes in serum albumin, PTH, triglyceride, cholesterol, calcium, phosphorus, hemoglobin, Kt/v and CRP before and after treatment were analyzed. Meta-analysis results indicated that, compared with normal protein diet, low-protein diet (LPD) supplemented with keto analogues (sLPD) could improve serum albumin (P < 0.00001), hyperparathyroidism (P < 0.00001) and hyperphosphatemia (P = 0.008). No differences in triglyceride, cholesterol, hemoglobin, Kt/v and CRP were observed between different protein intake groups. Restricted protein diet supplemented with keto analogues (sLPD) may improve nutritional status and prevent hyperparathyroidism in ESRD patients. The current data were mainly obtained from short-term, single-center trails with small sample sizes and limited nutritional status indexes, indicating a need for further study.

Current Status Of The GRACE Follow-On Mission

NASA Astrophysics Data System (ADS)

Flechtner, Frank; Webb, Frank; Watkins, Michael; Landerer, Felix; Dahle, Christoph; Bettadpur, Srinivas

2017-04-01

As of the time of this abstract submission, the GRACE Follow-On satellites have been constructed and transferred to Ottobrunn near Munich for several months of operational testing in the IABG test centre. The Russian/Ukraine Dnepr launcher had to be exchanged and a corresponding new contract has been signed by GFZ and Iridium Satellite LLC. This includes a "Rideshare" between GRACE-FO and 5 Iridium-Next satellites on a Space-X Falcon-9 from Vandenberg Air Force Base in California within the launch period December 2017 till February 2018. The project team is conducting tests of satellite and instrument operation and performance and evaluating updated simulations of expected performance on-orbit, including the assessment of inter-satellite ranging (for both microwave and laser instruments), accelerometer, thermal variability and deformation, and other instrument and measurement errors. In addition, all required ground analysis software of the Science Data System is in development and being tested at JPL, UTCSR, and GFZ, in preparation for fully integrated end-to-end (international) testing from Level-1 through Level-3 data within 2017. In this presentation, we will provide the detailed status of project integration and test, the latest simulations of science performance, and a revised schedule for remaining project milestones.

The boot software of the control unit of the near infrared spectrograph of the Euclid space mission: technical specification

NASA Astrophysics Data System (ADS)

Gómez-Sáenz-de-Tejada, Jaime; Toledo-Moreo, Rafael; Colodro-Conde, Carlos; Pérez-Lizán, David; Fernández-Conde, Jesús; Sánchez-Prieto, Sebastián.

2016-07-01

The Near Infrared Spectrograph and Photometer (NISP) is one of the instruments on board the ESA EUCLID mission. The Boot Software (BSW) is in charge of initialization and communications after a reset occurs at hard- ware level. The Universidad Politecnica de Cartagena and Instituto de Astrofisica de Canarias are responsible of the Instrument Control Unit of the NISP (NI-ICU) in the Euclid Consortium. The NI-ICU BSW is developed by Universidad de Alcaĺa, and its main functions are: communication with the S/C for memory management, self-tests and start of a patchable Application Software (ASW). This paper presents the NI-ICU BSW status of definition and design at the end of the Technical Specification phase.

Prediction of ball and roller bearing thermal and kinematic performance by computer analysis

NASA Technical Reports Server (NTRS)

Pirvics, J.; Kleckner, R. J.

1983-01-01

Characteristics of good computerized analysis software are suggested. These general remarks and an overview of representative software precede a more detailed discussion of load support system analysis program structure. Particular attention is directed at a recent cylindrical roller bearing analysis as an example of the available design tools. Selected software modules are then examined to reveal the detail inherent in contemporary analysis. This leads to a brief section on current design computation which seeks to suggest when and why computerized analysis is warranted. An example concludes the argument offered for such design methodology. Finally, remarks are made concerning needs for model development to address effects which are now considered to be secondary but are anticipated to emerge to primary status in the near future.

Graphical Technique to Support the Teaching/Learning Process of Software Process Reference Models

NASA Astrophysics Data System (ADS)

Espinosa-Curiel, Ismael Edrein; Rodríguez-Jacobo, Josefina; Fernández-Zepeda, José Alberto

In this paper, we propose a set of diagrams to visualize software process reference models (PRM). The diagrams, called dimods, are the combination of some visual and process modeling techniques such as rich pictures, mind maps, IDEF and RAD diagrams. We show the use of this technique by designing a set of dimods for the Mexican Software Industry Process Model (MoProSoft). Additionally, we perform an evaluation of the usefulness of dimods. The result of the evaluation shows that dimods may be a support tool that facilitates the understanding, memorization, and learning of software PRMs in both, software development organizations and universities. The results also show that dimods may have advantages over the traditional description methods for these types of models.

Dynamic CT myocardial perfusion imaging: performance of 3D semi-automated evaluation software.

PubMed

Ebersberger, Ullrich; Marcus, Roy P; Schoepf, U Joseph; Lo, Gladys G; Wang, Yining; Blanke, Philipp; Geyer, Lucas L; Gray, J Cranston; McQuiston, Andrew D; Cho, Young Jun; Scheuering, Michael; Canstein, Christian; Nikolaou, Konstantin; Hoffmann, Ellen; Bamberg, Fabian

2014-01-01

To evaluate the performance of three-dimensional semi-automated evaluation software for the assessment of myocardial blood flow (MBF) and blood volume (MBV) at dynamic myocardial perfusion computed tomography (CT). Volume-based software relying on marginal space learning and probabilistic boosting tree-based contour fitting was applied to CT myocardial perfusion imaging data of 37 subjects. In addition, all image data were analysed manually and both approaches were compared with SPECT findings. Study endpoints included time of analysis and conventional measures of diagnostic accuracy. Of 592 analysable segments, 42 showed perfusion defects on SPECT. Average analysis times for the manual and software-based approaches were 49.1 ± 11.2 and 16.5 ± 3.7 min respectively (P < 0.01). There was strong agreement between the two measures of interest (MBF, ICC = 0.91, and MBV, ICC = 0.88, both P < 0.01) and no significant difference in MBF/MBV with respect to diagnostic accuracy between the two approaches for both MBF and MBV for manual versus software-based approach; respectively; all comparisons P > 0.05. Three-dimensional semi-automated evaluation of dynamic myocardial perfusion CT data provides similar measures and diagnostic accuracy to manual evaluation, albeit with substantially reduced analysis times. This capability may aid the integration of this test into clinical workflows. • Myocardial perfusion CT is attractive for comprehensive coronary heart disease assessment. • Traditional image analysis methods are cumbersome and time-consuming. • Automated 3D perfusion software shortens analysis times. • Automated 3D perfusion software increases standardisation of myocardial perfusion CT. • Automated, standardised analysis fosters myocardial perfusion CT integration into clinical practice.

NIMBUS-7 ERB MATGEN Science Document

NASA Technical Reports Server (NTRS)

Soule, H. V.

1983-01-01

The ERB algorithms and computer software data flow used to convert sensor data into equivalent radiometric data are described in detail. The NIMBUS satellite location, orientation and sensor orientation algorithms are given. The computer housekeeping and data flow and sensor/data status algorithms are also given.

High-power transmitter automation. [deep space network

NASA Technical Reports Server (NTRS)

Gosline, R.

1980-01-01

The current status of the transmitter automation development applicable to all transmitters in the deep space network is described. Interface and software designs are described that improve reliability and reduce the time required for subsystem turn-on and klystron saturation to less than 10 minutes.

Australian Academic Use of the Internet.

ERIC Educational Resources Information Center

Applebee, Andrelyn C.; Clayton, Peter; Pascoe, Celina

1997-01-01

A study of academic staff at the University of Canberra (Australia) in 1995 determined use of electronic mail, Telnet, file transfer protocol (FTP) software, World Wide Web, library and document delivery services, discussion groups, and student communication. Examined demographic characteristics of faculty (discipline, employment status, gender,…

New and Promising: Software Worth a Look. A MicroSIFT Survey of Educational Software Preview Center Coordinators. Volume II, No. 2.

ERIC Educational Resources Information Center

Podany, Zita

This guide lists 19 software packages considered to be worthy of further consideration by other reviewing agencies and schools by a group of 17 computer coordinators from educational software preview centers and evaluation agencies. The following software is listed: (1) ASK-IT, an authoring tool; (2) Balance of the Planet, an environmental…

New and Promising: Software Worth a Look. A MicroSIFT Survey of Educational Software Preview Center Coordinators. Volume II, No. 1.

ERIC Educational Resources Information Center

Podany, Zita

This guide lists 21 software packages considered to be worthy of further consideration by other reviewing agencies and schools by a group of 12 computer coordinators from educational software preview centers and evaluation agencies. These software products have been selected as not being likely to appear in the reviews produced by major software…

Measuring the software process and product: Lessons learned in the SEL

NASA Technical Reports Server (NTRS)

Basili, V. R.

1985-01-01

The software development process and product can and should be measured. The software measurement process at the Software Engineering Laboratory (SEL) has taught a major lesson: develop a goal-driven paradigm (also characterized as a goal/question/metric paradigm) for data collection. Project analysis under this paradigm leads to a design for evaluating and improving the methodology of software development and maintenance.

Off-the-shelf real-time monitoring of satellite constellations in a visual 3-D environment

NASA Technical Reports Server (NTRS)

Schwuttke, Ursula M.; Hervias, Felipe; Cheng, Cecilia Han; Mactutis, Anthony; Angelino, Robert

1996-01-01

The multimission spacecraft analysis system (MSAS) data monitor is a generic software product for future real-time data monitoring and analysis. The system represents the status of a satellite constellation through the shape, color, motion and position of graphical objects floating in a three dimensional virtual reality environment. It may be used for the monitoring of large volumes of data, for viewing results in configurable displays, and for providing high level and detailed views of a constellation of monitored satellites. It is considered that the data monitor is an improvement on conventional graphic and text-based displays as it increases the amount of data that the operator can absorb in a given period, and can be installed and configured without the requirement for software development by the end user. The functionality of the system is described, including: the navigation abilities; the representation of alarms in the cybergrid; limit violation; real-time trend analysis, and alarm status indication.

Quality of life assessment software for computer-inexperienced older adults: multimedia utility elicitation for activities of daily living.

PubMed Central

Goldstein, M. K.; Miller, D. E.; Davies, S.; Garber, A. M.

2002-01-01

Functional status as measured by dependencies in the Activities of Daily Living (ADLs) is an important indicator of overall health for older adults. Methodologies for outcomes-based medical-decision-making for public policy, such as decision modeling and cost-effectiveness analysis, require utilities for outcome health states. Utilities have been reported for many disease states, but have not been indexed by functional status, which is a strong predictor of outcome in geriatrics. We describe here a utility elicitation program developed specifically for use with computer-inexperienced older adults: Functional Limitation And Independence Rating (FLAIR1). FLAIR1 design features address common physical problems of the aged and computer attitudes of inexperienced users that could impede computer acceptance. We interviewed 400 adults ages 65 years and older with FLAIR1. In exit interviews with 154 respondents, 118 (76%) found FLAIR1 easy to use. Design features in FLAIR1 can be applied to other software for older adults PMID:12463834

Autoadaptivity and optimization in distributed ECG interpretation.

PubMed

Augustyniak, Piotr

2010-03-01

This paper addresses principal issues of the ECG interpretation adaptivity in a distributed surveillance network. In the age of pervasive access to wireless digital communication, distributed biosignal interpretation networks may not only optimally solve difficult medical cases, but also adapt the data acquisition, interpretation, and transmission to the variable patient's status and availability of technical resources. The background of such adaptivity is the innovative use of results from the automatic ECG analysis to the seamless remote modification of the interpreting software. Since the medical relevance of issued diagnostic data depends on the patient's status, the interpretation adaptivity implies the flexibility of report content and frequency. Proposed solutions are based on the research on human experts behavior, procedures reliability, and usage statistics. Despite the limited scale of our prototype client-server application, the tests yielded very promising results: the transmission channel occupation was reduced by 2.6 to 5.6 times comparing to the rigid reporting mode and the improvement of the remotely computed diagnostic outcome was achieved in case of over 80% of software adaptation attempts.

A software technology evaluation program

NASA Technical Reports Server (NTRS)

Novaes-Card, David N.

1985-01-01

A set of quantitative approaches is presented for evaluating software development methods and tools. The basic idea is to generate a set of goals which are refined into quantifiable questions which specify metrics to be collected on the software development and maintenance process and product. These metrics can be used to characterize, evaluate, predict, and motivate. They can be used in an active as well as passive way by learning form analyzing the data and improving the methods and tools based upon what is learned from that analysis. Several examples were given representing each of the different approaches to evaluation. The cost of the approaches varied inversely with the level of confidence in the interpretation of the results.

Using Colored Stochastic Petri Net (CS-PN) software for protocol specification, validation, and evaluation

NASA Technical Reports Server (NTRS)

Zenie, Alexandre; Luguern, Jean-Pierre

1987-01-01

The specification, verification, validation, and evaluation, which make up the different steps of the CS-PN software are outlined. The colored stochastic Petri net software is applied to a Wound/Wait protocol decomposable into two principal modules: request or couple (transaction, granule) treatment module and wound treatment module. Each module is specified, verified, validated, and then evaluated separately, to deduce a verification, validation and evaluation of the complete protocol. The colored stochastic Petri nets tool is shown to be a natural extension of the stochastic tool, adapted to distributed systems and protocols, because the color conveniently takes into account the numerous sites, transactions, granules and messages.

Evaluating Process Sustainability Using Flowsheet Monitoring

EPA Science Inventory

Environmental metric software can be used to evaluate the sustainability of a chemical based on data from the chemical process that is used to manufacture it. One problem in developing environmental metric software is that chemical process simulation packages typically do not rea...

Spacelab user implementation assessment study. (Software requirements analysis). Volume 2: Technical report

NASA Technical Reports Server (NTRS)

1976-01-01

The engineering analyses and evaluation studies conducted for the Software Requirements Analysis are discussed. Included are the development of the study data base, synthesis of implementation approaches for software required by both mandatory onboard computer services and command/control functions, and identification and implementation of software for ground processing activities.

Open Source Software in Medium Size Organizations: Key Factors for Adoption

ERIC Educational Resources Information Center

Solomon, Jerry T.

2010-01-01

For-profit organizations are constantly evaluating new technologies to gain competitive advantage. One such technology, application software, has changed significantly over the past 25 years with the introduction of Open Source Software (OSS). In contrast to commercial software that is developed by private companies and sold to organizations, OSS…

Experimental Evaluation of a Serious Game for Teaching Software Process Modeling

ERIC Educational Resources Information Center

Chaves, Rafael Oliveira; von Wangenheim, Christiane Gresse; Furtado, Julio Cezar Costa; Oliveira, Sandro Ronaldo Bezerra; Santos, Alex; Favero, Eloi Luiz

2015-01-01

Software process modeling (SPM) is an important area of software engineering because it provides a basis for managing, automating, and supporting software process improvement (SPI). Teaching SPM is a challenging task, mainly because it lays great emphasis on theory and offers few practical exercises. Furthermore, as yet few teaching approaches…

Advanced communications technology satellite high burst rate link evaluation terminal experiment control and monitor software user's guide, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1992-01-01

The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document.

BESIII physical offline data analysis on virtualization platform

NASA Astrophysics Data System (ADS)

Huang, Q.; Li, H.; Kan, B.; Shi, J.; Lei, X.

2015-12-01

In this contribution, we present an ongoing work, which aims at benefiting BESIII computing system for higher resource utilization and more efficient job operations brought by cloud and virtualization technology with Openstack and KVM. We begin with the architecture of BESIII offline software to understand how it works. We mainly report the KVM performance evaluation and optimization from various factors in hardware and kernel. Experimental results show the CPU performance penalty of KVM can be approximately decreased to 3%. In addition, the performance comparison between KVM and physical machines in aspect of CPU, disk IO and network IO is also presented. Finally, we present our development work, an adaptive cloud scheduler, which allocates and reclaims VMs dynamically according to the status of TORQUE queue and the size of resource pool to improve resource utilization and job processing efficiency.

Bridge Displacement Monitoring Method Based on Laser Projection-Sensing Technology

PubMed Central

Zhao, Xuefeng; Liu, Hao; Yu, Yan; Xu, Xiaodong; Hu, Weitong; Li, Mingchu; Ou, Jingping

2015-01-01

Bridge displacement is the most basic evaluation index of the health status of a bridge structure. The existing measurement methods for bridge displacement basically fail to realize long-term and real-time dynamic monitoring of bridge structures, because of the low degree of automation and the insufficient precision, causing bottlenecks and restriction. To solve this problem, we proposed a bridge displacement monitoring system based on laser projection-sensing technology. First, the laser spot recognition method was studied. Second, the software for the displacement monitoring system was developed. Finally, a series of experiments using this system were conducted, and the results show that such a system has high measurement accuracy and speed. We aim to develop a low-cost, high-accuracy and long-term monitoring method for bridge displacement based on these preliminary efforts. PMID:25871716

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ishihara, T

Currently, the problem at hand is in distributing identical copies of OEP and filter software to a large number of farm nodes. One of the common methods used to transfer these softwares is through unicast. Unicast protocol faces the problem of repetitiously sending the same data over the network. Since the sending rate is limited, this process poses to be a bottleneck. Therefore, one possible solution to this problem lies in creating a reliable multicast protocol. A specific type of multicast protocol is the Bulk Multicast Protocol [4]. This system consists of one sender distributing data to many receivers. Themore » sender delivers data at a given rate of data packets. In response to that, the receiver replies to the sender with a status packet which contains information about the packet loss in terms of Negative Acknowledgment. The probability of the status packet sent back to the sender is+, where N is the number of receivers. The protocol is designed to have approximately 1 status packet for each data packet sent. In this project, we were able to show that the time taken for the complete transfer of a file to multiple receivers was about 12 times faster with multicast than by the use of unicast. The implementation of this experimental protocol shows remarkable improvement in mass data transfer to a large number of farm machines.« less

Technology Evaluation Tools and Teacher Performance in Public Schools

ERIC Educational Resources Information Center

Stonehouse, Pauline; Keengwe, Jared

2013-01-01

The purpose of this study was, (a) to describe the introduction of mVAL software and Charlotte Danielson Rubrics (CDR) as teacher evaluation tools; (b) to compare the process and outcomes of the new initiative with traditional systems; and (c) to evaluate the software from the perspective of participants in the system. This study highlights the…

Software for Information Storage and Retrieval Tested, Evaluated and Compared: Part VI--Various Additional Programs.

ERIC Educational Resources Information Center

Sieverts, Eric G.; And Others

1993-01-01

Reports on tests evaluating nine microcomputer software packages designed for information storage and retrieval: BRS-Search, dtSearch, InfoBank, Micro-OPC, Q&A, STN-PFS, Strix, TINman, and ZYindex. Tables and narrative evaluations detail results related to security, hardware, user features, search capability, indexing, input, maintenance of files,…

Software for aerospace education: A bibliography, 2nd edition

NASA Technical Reports Server (NTRS)

Vogt, Gregory L.; Roth, Susan Kies; Phelps, Malcom V.

1990-01-01

This is the second aerospace education software bibliography to be published by the NASA Educational Technology Branch in Washington, DC. Unlike many software bibliographies, this bibliography does not evaluate and grade software according to its quality and value to the classroom, nor does it make any endorsements or warrant scientific accuracy. Rather, it describes software, its subject, approach, and technical details. This bibliography is intended as a convenience to educators. The specific software included represents replies to more than 300 queries to software producers for aerospace education programs.

[Use of Adobe Photoshop software in medical criminology].

PubMed

Nikitin, S A; Demidov, I V

2000-01-01

Describes the method of comparative analysis of various objects in practical medical criminology and making of high-quality photographs with the use of Adobe Photoshop software. Options of the software needed for expert evaluations are enumerated.

PhysioNet: physiologic signals, time series and related open source software for basic, clinical, and applied research.

PubMed

Moody, George B; Mark, Roger G; Goldberger, Ary L

2011-01-01

PhysioNet provides free web access to over 50 collections of recorded physiologic signals and time series, and related open-source software, in support of basic, clinical, and applied research in medicine, physiology, public health, biomedical engineering and computing, and medical instrument design and evaluation. Its three components (PhysioBank, the archive of signals; PhysioToolkit, the software library; and PhysioNetWorks, the virtual laboratory for collaborative development of future PhysioBank data collections and PhysioToolkit software components) connect researchers and students who need physiologic signals and relevant software with researchers who have data and software to share. PhysioNet's annual open engineering challenges stimulate rapid progress on unsolved or poorly solved questions of basic or clinical interest, by focusing attention on achievable solutions that can be evaluated and compared objectively using freely available reference data.

Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Kistler, David; Bristow, John; Smith, Don

1994-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. Nearly 200 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) The Software Engineering Laboratory; (2) The Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

Reuse Metrics for Object Oriented Software

NASA Technical Reports Server (NTRS)

Bieman, James M.

1998-01-01

One way to increase the quality of software products and the productivity of software development is to reuse existing software components when building new software systems. In order to monitor improvements in reuse, the level of reuse must be measured. In this NASA supported project we (1) derived a suite of metrics which quantify reuse attributes for object oriented, object based, and procedural software, (2) designed prototype tools to take these measurements in Ada, C++, Java, and C software, (3) evaluated the reuse in available software, (4) analyzed the relationship between coupling, cohesion, inheritance, and reuse, (5) collected object oriented software systems for our empirical analyses, and (6) developed quantitative criteria and methods for restructuring software to improve reusability.

Mining dynamic noteworthy functions in software execution sequences.

PubMed

Zhang, Bing; Huang, Guoyan; Wang, Yuqian; He, Haitao; Ren, Jiadong

2017-01-01

As the quality of crucial entities can directly affect that of software, their identification and protection become an important premise for effective software development, management, maintenance and testing, which thus contribute to improving the software quality and its attack-defending ability. Most analysis and evaluation on important entities like codes-based static structure analysis are on the destruction of the actual software running. In this paper, from the perspective of software execution process, we proposed an approach to mine dynamic noteworthy functions (DNFM)in software execution sequences. First, according to software decompiling and tracking stack changes, the execution traces composed of a series of function addresses were acquired. Then these traces were modeled as execution sequences and then simplified so as to get simplified sequences (SFS), followed by the extraction of patterns through pattern extraction (PE) algorithm from SFS. After that, evaluating indicators inner-importance and inter-importance were designed to measure the noteworthiness of functions in DNFM algorithm. Finally, these functions were sorted by their noteworthiness. Comparison and contrast were conducted on the experiment results from two traditional complex network-based node mining methods, namely PageRank and DegreeRank. The results show that the DNFM method can mine noteworthy functions in software effectively and precisely.

Software support in automation of medicinal product evaluations.

PubMed

Juric, Radmila; Shojanoori, Reza; Slevin, Lindi; Williams, Stephen

2005-01-01

Medicinal product evaluation is one of the most important tasks undertaken by government health departments and their regulatory authorities, in every country in the world. The automation and adequate software support are critical tasks that can improve the efficiency and interoperation of regulatory systems across the world. In this paper we propose a software solution that supports the automation of the (i) submission of licensing applications, and (ii) evaluations of submitted licensing applications, according to regulatory authorities' procedures. The novelty of our solution is in allowing licensing applications to be submitted in any country in the world and evaluated according to any evaluation procedure (which can be chosen by either regulatory authorities or pharmaceutical companies). Consequently, submission and evaluation procedures become interoperable and the associated data repositories/databases can be shared between various countries and regulatory authorities.

How to choose the right statistical software?—a method increasing the post-purchase satisfaction

PubMed Central

2015-01-01

Nowadays, we live in the “data era” where the use of statistical or data analysis software is inevitable, in any research field. This means that the choice of the right software tool or platform is a strategic issue for a research department. Nevertheless, in many cases decision makers do not pay the right attention to a comprehensive and appropriate evaluation of what the market offers. Indeed, the choice still depends on few factors like, for instance, researcher’s personal inclination, e.g., which software have been used at the university or is already known. This is not wrong in principle, but in some cases it’s not enough at all and might lead to a “dead end” situation, typically after months or years of investments already done on the wrong software. This article, far from being a full and complete guide to statistical software evaluation, aims to illustrate some key points of the decision process and introduce an extended range of factors which can help to undertake the right choice, at least in potential. There is not enough literature about that topic, most of the time underestimated, both in the traditional literature and even in the so called “gray literature”, even if some documents or short pages can be found online. Anyhow, it seems there is not a common and known standpoint about the process of software evaluation from the final user perspective. We suggests a multi-factor analysis leading to an evaluation matrix tool, to be intended as a flexible and customizable tool, aimed to provide a clearer picture of the software alternatives available, not in abstract but related to the researcher’s own context and needs. This method is a result of about twenty years of experience of the author in the field of evaluating and using technical-computing software and partially arises from a research made about such topics as part of a project funded by European Commission under the Lifelong Learning Programme 2011. PMID:26793368

A research on the application of software defined networking in satellite network architecture

NASA Astrophysics Data System (ADS)

Song, Huan; Chen, Jinqiang; Cao, Suzhi; Cui, Dandan; Li, Tong; Su, Yuxing

2017-10-01

Software defined network is a new type of network architecture, which decouples control plane and data plane of traditional network, has the feature of flexible configurations and is a direction of the next generation terrestrial Internet development. Satellite network is an important part of the space-ground integrated information network, while the traditional satellite network has the disadvantages of difficult network topology maintenance and slow configuration. The application of SDN technology in satellite network can solve these problems that traditional satellite network faces. At present, the research on the application of SDN technology in satellite network is still in the stage of preliminary study. In this paper, we start with introducing the SDN technology and satellite network architecture. Then we mainly introduce software defined satellite network architecture, as well as the comparison of different software defined satellite network architecture and satellite network virtualization. Finally, the present research status and development trend of SDN technology in satellite network are analyzed.

Let your fingers do the walking: The projects most invaluable tool

NASA Technical Reports Server (NTRS)

Zirk, Deborah A.

1993-01-01

The barrage of information pertaining to the software being developed for a project can be overwhelming. Current status information, as well as the statistics and history of software releases, should be 'at the fingertips' of project management and key technical personnel. This paper discusses the development, configuration, capabilities, and operation of a relational database, the System Engineering Database (SEDB) which was designed to assist management in monitoring of the tasks performed by the Network Control Center (NCC) Project. This database has proven to be an invaluable project tool and is utilized daily to support all project personnel.

Development Status: Automation Advanced Development Space Station Freedom Electric Power System

NASA Technical Reports Server (NTRS)

Dolce, James L.; Kish, James A.; Mellor, Pamela A.

1990-01-01

Electric power system automation for Space Station Freedom is intended to operate in a loop. Data from the power system is used for diagnosis and security analysis to generate Operations Management System (OMS) requests, which are sent to an arbiter, which sends a plan to a commander generator connected to the electric power system. This viewgraph presentation profiles automation software for diagnosis, scheduling, and constraint interfaces, and simulation to support automation development. The automation development process is diagrammed, and the process of creating Ada and ART versions of the automation software is described.

Cargo Movement Operations System (CMOS) Draft Software Product Specification, Increment I

DTIC Science & Technology

1990-12-13

NO [ ] COMMENT DISPOSITION: ACCEPT [ ] REJECT [ ] COMMENT STATUS: OPEN [ ] CLOSED [ ] Cmnt Page Paragraph No. No. Number Comment 1. 2 1.3 Delete "Software Product Specification" from lines 4 & 5 of the first paragraph. 2. 11 3.4 Change "Table 3.4" to "Appendix E". 3. App B (all) Change the term "Deskview" used to describe the development language to "DESQview". ORIGINATOR CONTROL NUMBER: SPS1-0002 PROGRAM OFFICE CONTROL NUMBER: DATA ITEM DISCREPANCY WORKSHEET CDRL NUMBER: A014-02 DATE: 12/13/90 ORIGINATOR NAME:

Intellectual property and information controversy (II)

NASA Astrophysics Data System (ADS)

Aoyama, Hirokazu

As advanced information has been proceeded rapidly, intellectual property has become more important than ever as business resources of enterprises. Based on the former report by the author "present status of and trend in intellectual property" this paper describes "information" related intellectual property controversy which have been occurred, that is, 1) affairs related to computer hardwares and softwares (the case of compatible machines and OS, the case of application softwares, computer crimes) and 2) affairs on trade secret (the case of revealing enterprises'secret, the case of industrial espionage). It also discusses how intellectual property should be protected and utilized from now on.

Periapical status and quality of root fillings in a selected adult Riga population.

PubMed

Jersa, Ilana; Kundzina, Rita

2013-01-01

The aim of the study was to assess the prevalence of apical periodontitis and quality of root canal fillings in an adult Riga subpopulation. Panoramic radiographs of Latvian adults 35-44 year old attending a private dental clinic for the first time during the period of 2004-2008 were included in the study. Totally, 312 out of 1248 panoramic radiographs were randomly selected and examined for periapical conditions and endodontic treatment quality. The technical quality of root fillings was evaluated in terms of length in relation to the root apex and lateral adaptation to the canal wall. The periapical status was assessed using the PAI index. The data were analyzed using SPSS 14 computer software program. Statistical significance was assessed by the chi-squared (Pearson's) test. Out of the 312 individuals examined 224 (72%) had one or more teeth with apical periodontitis (PAI 3-5) and 272 individuals (87%) had one or more endodontically treated teeth. Amongst 7065 teeth evaluated 1255 (18%) were endodontically treated. Only 285 teeth (23%) of the root canal treated teeth were with complete root canal fillings. There was a statistically significant relationship between quality of root canal fillings and apical periodontitis (p<0.0001). In teeth with complete fillings only 15% were with apical periodontitis, but apical periodontitis were detected in 342 teeth (35%) with incomplete root fillings. The results from this study indicates a high prevalence of apical periodontitis and low quality of root fillings in a selected adult Riga population.

Influence of estrogen replacement and aging on the expression of nerve growth factor in the urethra of female rats.

PubMed

Zucchi, Eliana V M; Jármy-Di Bella, Zsuzsanna I K; Castro, Rodrigo A; Takano, Claudia C; Simões, Manuel J; Girão, Manoel J B C; Sartori, Marair G F

2012-06-01

To evaluate the expression of nerve growth factor (NGF) in the urethra of adult female rats in different hormonal status using immunohistochemical assay. Forty-eight rats (Rattus norvegicus albinus, Rodentia, Mammalia) from the CEDEME-UNIFESP laboratory animal facility were used in the study. Rats were divided into four groups: group A, 12 non-neutered rats; group B, 12 oophorectomized rats; group C, 12 castrated rats treated with 17β-estradiol for 30 days; and group D, 12 aging rats. Animals were killed by lethal injection and their urethra was removed. NGF expression was evaluated by means of immunohistochemistry using mouse monoclonal primary IgG antibody anti-NGF diluted 1:600, and read under 400× magnification. Digital analysis of the images was done by Imagelab software. The intensity of the dark brown color was used as a measure of NGF cytoplasmatic expression, and was used to quantify the percentage of epithelial and muscular layer cells showing this neurotrophin. After oophorectomy, rats showed a significant increase in NGF expression in the periurethral muscular layer. Compared with oophorectomized rats, NGF expression increased in the epithelial layer and diminished in the periurethral smooth muscle following estrogen administration. In 18-month-old rats, NGF expression was diminished in both epithelial and muscular layers. Hormonal status led to significant differences in NGF protein expression in urethral epithelium and periurethral smooth muscle. Copyright © 2012 Wiley Periodicals, Inc.

Software engineering laboratory series: Annotated bibliography of software engineering laboratory literature

NASA Technical Reports Server (NTRS)

Morusiewicz, Linda; Valett, Jon

1992-01-01

This document is an annotated bibliography of technical papers, documents, and memorandums produced by or related to the Software Engineering Laboratory. More than 100 publications are summarized. These publications cover many areas of software engineering and range from research reports to software documentation. This document has been updated and reorganized substantially since the original version (SEL-82-006, November 1982). All materials have been grouped into eight general subject areas for easy reference: (1) the Software Engineering Laboratory; (2) the Software Engineering Laboratory: Software Development Documents; (3) Software Tools; (4) Software Models; (5) Software Measurement; (6) Technology Evaluations; (7) Ada Technology; and (8) Data Collection. This document contains an index of these publications classified by individual author.

AN EVALUATION OF FIVE COMMERCIAL IMMUNOASSAY DATA ANALYSIS SOFTWARE SYSTEMS

EPA Science Inventory

An evaluation of five commercial software systems used for immunoassay data analysis revealed numerous deficiencies. Often, the utility of statistical output was compromised by poor documentation. Several data sets were run through each system using a four-parameter calibration f...

Evaluating Process Sustainability Using Flowsheet Monitoring (Abstract)

EPA Science Inventory

Environmental metric software can be used to evaluate the sustainability of a chemical based upon data from the chemical process that is used to manufacture it. One problem in developing environmental metric software is that chemical process simulation packages typically do not p...

Michigan Department of Transportation statewide advanced traffic management system (ATMS) procurement evaluation - phase I : software procurement.

DOT National Transportation Integrated Search

2009-04-01

This project evaluates the process that was followed by MDOT and other stakeholders for the acquisition : of new Advanced Traffic Management System (ATMS) software aiming to integrate and facilitate the : management of various Intelligent Transportat...

Software Engineering Laboratory (SEL) programmer workbench phase 1 evaluation

NASA Technical Reports Server (NTRS)

1981-01-01

Phase 1 of the SEL programmer workbench consists of the design of the following three components: communications link, command language processor, and collection of software aids. A brief description, and evaluation, and recommendations are presented for each of these three components.

A dual mode breath sampler for the collection of the end-tidal and dead space fractions.

PubMed

Salvo, P; Ferrari, C; Persia, R; Ghimenti, S; Lomonaco, T; Bellagambi, F; Di Francesco, F

2015-06-01

This work presents a breath sampler prototype automatically collecting end-tidal (single and multiple breaths) or dead space air fractions (multiple breaths). This result is achieved by real time measurements of the CO2 partial pressure and airflow during the expiratory and inspiratory phases. Suitable algorithms, used to control a solenoid valve, guarantee that a Nalophan(®) bag is filled with the selected breath fraction even if the subject under test hyperventilates. The breath sampler has low pressure drop (<0.5 kPa) and uses inert or disposable components to avoid bacteriological risk for the patients and contamination of the breath samples. A fully customisable software interface allows a real time control of the hardware and software status. The performances of the breath sampler were evaluated by comparing (a) the CO2 partial pressure calculated during the sampling with the CO2 pressure measured off-line within the Nalophan(®) bag; (b) the concentrations of four selected volatile organic compounds in dead space, end-tidal and mixed breath fractions. Results showed negligible deviations between calculated and off-line CO2 pressure values and the distributions of the selected compounds into dead space, end-tidal and mixed breath fractions were in agreement with their chemical-physical properties. Copyright © 2015. Published by Elsevier Ltd.

Examining Authenticity: An Initial Exploration of the Suitability of Handwritten Electronic Signatures.

PubMed

Heckeroth, J; Boywitt, C D

2017-06-01

Considering the increasing relevance of handwritten electronically captured signatures, we evaluated the ability of forensic handwriting examiners (FHEs) to distinguish between authentic and simulated electronic signatures. Sixty-six professional FHEs examined the authenticity of electronic signatures captured with software by signotec on a smartphone Galaxy Note 4 by Samsung and signatures made with a ballpoint pen on paper (conventional signatures). In addition, we experimentally varied the name ("J. König" vs. "A. Zaiser") and the status (authentic vs. simulated) of the signatures in question. FHEs' conclusions about the authenticity did not show a statistically significant general difference between electronic and conventional signatures. Furthermore, no significant discrepancies between electronic and conventional signatures were found with regard to other important aspects of the authenticity examination such as questioned signatures' graphic information content, the suitability of the provided sample signatures, the necessity of further examinations and the levels of difficulty of the cases under examination. Thus, this study did not reveal any indications that electronic signatures captured with software by signotec on a Galaxy Note 4 are less well suited than conventional signatures for the examination of authenticity, precluding potential technical problems concerning the integrity of electronic signatures. Copyright © 2017 Elsevier B.V. All rights reserved.

Identification of fidgety movements and prediction of CP by the use of computer-based video analysis is more accurate when based on two video recordings.

PubMed

Adde, Lars; Helbostad, Jorunn; Jensenius, Alexander R; Langaas, Mette; Støen, Ragnhild

2013-08-01

This study evaluates the role of postterm age at assessment and the use of one or two video recordings for the detection of fidgety movements (FMs) and prediction of cerebral palsy (CP) using computer vision software. Recordings between 9 and 17 weeks postterm age from 52 preterm and term infants (24 boys, 28 girls; 26 born preterm) were used. Recordings were analyzed using computer vision software. Movement variables, derived from differences between subsequent video frames, were used for quantitative analysis. Sensitivities, specificities, and area under curve were estimated for the first and second recording, or a mean of both. FMs were classified based on the Prechtl approach of general movement assessment. CP status was reported at 2 years. Nine children developed CP of whom all recordings had absent FMs. The mean variability of the centroid of motion (CSD) from two recordings was more accurate than using only one recording, and identified all children who were diagnosed with CP at 2 years. Age at assessment did not influence the detection of FMs or prediction of CP. The accuracy of computer vision techniques in identifying FMs and predicting CP based on two recordings should be confirmed in future studies.

Supporting the Use of CERT (registered trademark) Secure Coding Standards in DoD Acquisitions

DTIC Science & Technology

2012-07-01

Capability Maturity Model IntegrationSM (CMMI®) [Davis 2009]. SM Team Software Process, TSP, and Capability Maturity Model Integration are service...STP Software Test Plan TEP Test and Evaluation Plan TSP Team Software Process V & V verification and validation CMU/SEI-2012-TN-016 | 47...Supporting the Use of CERT® Secure Coding Standards in DoD Acquisitions Tim Morrow ( Software Engineering Institute) Robert Seacord ( Software

Intraobserver and Interobserver Agreement of Structural and Functional Software Programs for Measuring Glaucoma Progression.

PubMed

Moreno-Montañés, Javier; Antón, Vanesa; Antón, Alfonso; Larrosa, José M; Martinez-de-la-Casa, José María; Rebolleda, Gema; Ussa, Fernando; García-Granero, Marta

2017-04-01

It is important to evaluate intraobserver and interobserver agreement using visual field (VF) testing and optical coherence tomography (OCT) software in order to understand whether the use of this software is sufficient to detect glaucoma progression and to make decisions regarding its treatment. To evaluate agreement in VF and OCT software among 5 glaucoma specialists. The printout pages from VF progression software and OCT progression software from 100 patients were randomized, and the 5 glaucoma specialists subjectively and independently evaluated them for glaucoma. Each image was classified as having no progression, questionable progression, or progression. The principal investigator classified the patients previously as without variability (normal) or with high variability among tests (difficult). Using both software, the specialists also evaluated whether the glaucoma damage had progressed and if treatment change was needed. One month later, the same observers reevaluated the patients in a different order to determine intraobserver reproducibility. Intraobserver and interobserver agreement was estimated using κ statistics and Gwet second-order agreement coefficient. The agreement was compared with other factors. Of the 100 observed patients, half were male and all were white; the mean (SD) age was 69.7 (14.1) years. Intraobserver agreement was substantial to almost perfect for VF software (overall κ [95% CI], 0.59 [0.46-0.72] to 0.87 [0.79-0.96]) and similar for OCT software (overall κ [95% CI], 0.59 [0.46-0.71] to 0.85 [0.76-0.94]). Interobserver agreement among the 5 glaucoma specialists with the VF progression software was moderate (κ, 0.48; 95% CI, 0.41-0.55) and similar to OCT progression software (κ, 0.52; 95% CI, 0.44-0.59). Interobserver agreement was substantial in images classified as having no progression but only fair in those classified as having questionable glaucoma progression or glaucoma progression. Interobserver agreement was fair regarding questions about glaucoma progression (κ, 0.39; 95% CI, 0.32-0.48) and consideration about treatment changes (κ, 0.39; 95% CI, 0.32-0.48). The factors associated with agreement were the glaucoma stage and case difficulty. There was substantial intraobserver agreement but moderate interobserver agreement among glaucoma specialists using 2 glaucoma progression software packages. These data suggest that these glaucoma progression software packages are insufficient to obtain high interobserver agreement in both devices except in patients with no progression. The low agreement regarding progression or treatment changes suggests that both software programs used in isolation are insufficient for decision making.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salama, A.; Mikhail, M.

Comprehensive software packages have been developed at the Western Research Centre as tools to help coal preparation engineers analyze, evaluate, and control coal cleaning processes. The COal Preparation Software package (COPS) performs three functions: (1) data handling and manipulation, (2) data analysis, including the generation of washability data, performance evaluation and prediction, density and size modeling, evaluation of density and size partition characteristics and attrition curves, and (3) generation of graphics output. The Separation ChARacteristics Estimation software packages (SCARE) are developed to balance raw density or size separation data. The cases of density and size separation data are considered. Themore » generated balanced data can take the balanced or normalized forms. The scaled form is desirable for direct determination of the partition functions (curves). The raw and generated separation data are displayed in tabular and/or graphical forms. The computer softwares described in this paper are valuable tools for coal preparation plant engineers and operators for evaluating process performance, adjusting plant parameters, and balancing raw density or size separation data. These packages have been applied very successfully in many projects carried out by WRC for the Canadian coal preparation industry. The software packages are designed to run on a personal computer (PC).« less

36 CFR § 1194.21 - Software applications and operating systems.

Code of Federal Regulations, 2013 CFR

2013-07-01

... an image represents a program element, the information conveyed by the image must also be available in text. (e) When bitmap images are used to identify controls, status indicators, or other programmatic elements, the meaning assigned to those images shall be consistent throughout an application's...

36 CFR 1194.21 - Software applications and operating systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

... an image represents a program element, the information conveyed by the image must also be available in text. (e) When bitmap images are used to identify controls, status indicators, or other programmatic elements, the meaning assigned to those images shall be consistent throughout an application's...

36 CFR 1194.21 - Software applications and operating systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... an image represents a program element, the information conveyed by the image must also be available in text. (e) When bitmap images are used to identify controls, status indicators, or other programmatic elements, the meaning assigned to those images shall be consistent throughout an application's...

36 CFR 1194.21 - Software applications and operating systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... an image represents a program element, the information conveyed by the image must also be available in text. (e) When bitmap images are used to identify controls, status indicators, or other programmatic elements, the meaning assigned to those images shall be consistent throughout an application's...

36 CFR 1194.21 - Software applications and operating systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... an image represents a program element, the information conveyed by the image must also be available in text. (e) When bitmap images are used to identify controls, status indicators, or other programmatic elements, the meaning assigned to those images shall be consistent throughout an application's...

Serendipity and Holism: The Beauty of OPACs.

ERIC Educational Resources Information Center

Rice, James

1988-01-01

Identifies factors which may account for user dissatisfaction with online public access catalogs (OPACs) and discusses some advantages of OPACs over card catalogs: (1) design for subject searching; (2) flexibility; (3) browsing capability; (4) precision; (5) availability of status information; and (6) development of microcomputer software to…

The RISC (Reduced Instruction Set Computer) Architecture and Computer Performance Evaluation.

DTIC Science & Technology

1986-03-01

time where the main emphasis of the evaluation process is put on the software . The model is intended to provide a tool for computer architects to use...program, or 3) Was to be implemented in random logic more effec- tively than the equivalent sequence of software instructions. Both data and address...definition is the IEEE standard 729-1983 stating Computer Architecture as: " The process of defining a collection of hardware and software components and

Software Engineering Support of the Third Round of Scientific Grand Challenge Investigations: Earth System Modeling Software Framework Survey

NASA Technical Reports Server (NTRS)

Talbot, Bryan; Zhou, Shu-Jia; Higgins, Glenn; Zukor, Dorothy (Technical Monitor)

2002-01-01

One of the most significant challenges in large-scale climate modeling, as well as in high-performance computing in other scientific fields, is that of effectively integrating many software models from multiple contributors. A software framework facilitates the integration task, both in the development and runtime stages of the simulation. Effective software frameworks reduce the programming burden for the investigators, freeing them to focus more on the science and less on the parallel communication implementation. while maintaining high performance across numerous supercomputer and workstation architectures. This document surveys numerous software frameworks for potential use in Earth science modeling. Several frameworks are evaluated in depth, including Parallel Object-Oriented Methods and Applications (POOMA), Cactus (from (he relativistic physics community), Overture, Goddard Earth Modeling System (GEMS), the National Center for Atmospheric Research Flux Coupler, and UCLA/UCB Distributed Data Broker (DDB). Frameworks evaluated in less detail include ROOT, Parallel Application Workspace (PAWS), and Advanced Large-Scale Integrated Computational Environment (ALICE). A host of other frameworks and related tools are referenced in this context. The frameworks are evaluated individually and also compared with each other.

A Human Reliability Based Usability Evaluation Method for Safety-Critical Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillippe Palanque; Regina Bernhaupt; Ronald Boring

2006-04-01

Recent years have seen an increasing use of sophisticated interaction techniques including in the field of safety critical interactive software [8]. The use of such techniques has been required in order to increase the bandwidth between the users and systems and thus to help them deal efficiently with increasingly complex systems. These techniques come from research and innovation done in the field of humancomputer interaction (HCI). A significant effort is currently being undertaken by the HCI community in order to apply and extend current usability evaluation techniques to these new kinds of interaction techniques. However, very little has been donemore » to improve the reliability of software offering these kinds of interaction techniques. Even testing basic graphical user interfaces remains a challenge that has rarely been addressed in the field of software engineering [9]. However, the non reliability of interactive software can jeopardize usability evaluation by showing unexpected or undesired behaviors. The aim of this SIG is to provide a forum for both researchers and practitioners interested in testing interactive software. Our goal is to define a roadmap of activities to cross fertilize usability and reliability testing of these kinds of systems to minimize duplicate efforts in both communities.« less

THE EPA MULTIMEDIA INTEGRATED MODELING SYSTEM SOFTWARE SUITE

EPA Science Inventory

The U.S. EPA is developing a Multimedia Integrated Modeling System (MIMS) framework that will provide a software infrastructure or environment to support constructing, composing, executing, and evaluating complex modeling studies. The framework will include (1) common software ...

Development of Hardware-in-the-Loop Simulation Based on Gazebo and Pixhawk for Unmanned Aerial Vehicles

NASA Astrophysics Data System (ADS)

Nguyen, Khoa Dang; Ha, Cheolkeun

2018-04-01

Hardware-in-the-loop simulation (HILS) is well known as an effective approach in the design of unmanned aerial vehicles (UAV) systems, enabling engineers to test the control algorithm on a hardware board with a UAV model on the software. Performance of HILS is determined by performances of the control algorithm, the developed model, and the signal transfer between the hardware and software. The result of HILS is degraded if any signal could not be transferred to the correct destination. Therefore, this paper aims to develop a middleware software to secure communications in HILS system for testing the operation of a quad-rotor UAV. In our HILS, the Gazebo software is used to generate a nonlinear six-degrees-of-freedom (6DOF) model, sensor model, and 3D visualization for the quad-rotor UAV. Meanwhile, the flight control algorithm is designed and implemented on the Pixhawk hardware. New middleware software, referred to as the control application software (CAS), is proposed to ensure the connection and data transfer between Gazebo and Pixhawk using the multithread structure in Qt Creator. The CAS provides a graphical user interface (GUI), allowing the user to monitor the status of packet transfer, and perform the flight control commands and the real-time tuning parameters for the quad-rotor UAV. Numerical implementations have been performed to prove the effectiveness of the middleware software CAS suggested in this paper.

Monitoring activity patterns and trends of older adults.

PubMed

Virone, G; Sixsmith, A

2008-01-01

This paper presents a pattern mining model developed for the continuous monitoring of high level activities and home-based behaviors for functional and cognitive status assessment with ambient assisted living systems such as in the EU-funded SOPRANO project. Motivating older people to engage in regular physical exercise is a key task of SOPRANO to improve health status and executive functions. A case study has been elaborated through software simulations to show how physical everyday life activity such as walking or sitting could be assessed and controlled for a better health lifestyle using the model.

[Research and implementation of a real-time monitoring system for running status of medical monitors based on the internet of things].

PubMed

Li, Yiming; Qian, Mingli; Li, Long; Li, Bin

2014-07-01

This paper proposed a real-time monitoring system for running status of medical monitors based on the internet of things. In the aspect of hardware, a solution of ZigBee networks plus 470 MHz networks is proposed. In the aspect of software, graphical display of monitoring interface and real-time equipment failure alarm is implemented. The system has the function of remote equipment failure detection and wireless localization, which provides a practical and effective method for medical equipment management.

ACRF Instrumentation Status: New, Current, and Future - January 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

AS Koontz; S Choudhury; BD Ermold

2008-01-31

The purpose of this report is to provide status of the ingest software used to process instrument data for the Atmospheric Radiation Measurement Program Climate Research Facility (ACRF). The report is divided into 4 sections: (1) for news about ingests currently under development, (2) for current production ingests, (3) for future ingest development plans, and (4) for information on retired ingests. Please note that datastreams beginning in “xxx” indicate cases where ingests run at multiple ACRF sites, which results in a datastream(s) for each location.

Performance Evaluation of 3d Modeling Software for Uav Photogrammetry

NASA Astrophysics Data System (ADS)

Yanagi, H.; Chikatsu, H.

2016-06-01

UAV (Unmanned Aerial Vehicle) photogrammetry, which combines UAV and freely available internet-based 3D modeling software, is widely used as a low-cost and user-friendly photogrammetry technique in the fields such as remote sensing and geosciences. In UAV photogrammetry, only the platform used in conventional aerial photogrammetry is changed. Consequently, 3D modeling software contributes significantly to its expansion. However, the algorithms of the 3D modelling software are black box algorithms. As a result, only a few studies have been able to evaluate their accuracy using 3D coordinate check points. With this motive, Smart3DCapture and Pix4Dmapper were downloaded from the Internet and commercial software PhotoScan was also employed; investigations were performed in this paper using check points and images obtained from UAV.

SU-F-T-163: Improve Proton Therapy Efficiency: Report of a Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Y; Flanz, J; Mah, D

Purpose: The technology of proton therapy, especially the pencil beam scanning technique, is evolving very quickly. However, the efficiency of proton therapy seems to lag behind conventional photon therapy. The purpose of the abstract is to report on the findings of a workshop on improvement of QA, planning and treatment efficiency in proton therapy. Methods: A panel of physicists, clinicians, and vendor representatives from over 18 institutions in the United States and internationally were convened in Knoxville, Tennessee in November, 2015. The panel discussed several topics on how to improve proton therapy efficiency, including 1) lean principle and failure modemore » and effects analysis, 2) commissioning and machine QA, 3) treatment planning, optimization and evaluation, 4) patient positioning and IGRT, 5) vendor liaison and machine availability, and 6) staffing, education and training. Results: The relative time needed for machine QA, treatment planning & check in proton therapy was found to range from 1 to 2.5 times of that in photon therapy. Current status in proton QA, planning and treatment was assessed. Key areas for efficiency improvement, such as elimination of unnecessary QA items or steps and development of efficient software or hardware tools, were identified. A white paper to summarize our findings is being written. Conclusion: It is critical to improve efficiency by developing reliable proton beam lines, efficient software tools on treatment planning, optimization and evaluation, and dedicated proton QA device. Conscious efforts and collaborations from both industry leaders and proton therapy centers are needed to achieve this goal and further advance the technology of proton therapy.« less

Advanced Communications Technology Satellite high burst rate link evaluation terminal experiment control and monitor software maintenance manual, version 1.0

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.

1992-01-01

The Experiment Control and Monitor (EC&M) software was developed at NASA Lewis Research Center to support the Advanced Communications Technology Satellite (ACTS) High Burst Rate Link Evaluation Terminal (HBR-LET). The HBR-LET is an experimenter's terminal to communicate with the ACTS for various investigations by government agencies, universities, and industry. The EC&M software is one segment of the Control and Performance Monitoring (C&PM) software system of the HBR-LET. The EC&M software allows users to initialize, control, and monitor the instrumentation within the HBR-LET using a predefined sequence of commands. Besides instrument control, the C&PM software system is also responsible for computer communication between the HBR-LET and the ACTS NASA Ground Station and for uplink power control of the HBR-LET to demonstrate power augmentation during rain fade events. The EC&M Software User's Guide, Version 1.0 (NASA-CR-189160) outlines the commands required to install and operate the EC&M software. Input and output file descriptions, operator commands, and error recovery procedures are discussed in the document. The EC&M Software Maintenance Manual, Version 1.0 (NASA-CR-189161) is a programmer's guide that describes current implementation of the EC&M software from a technical perspective. An overview of the EC&M software, computer algorithms, format representation, and computer hardware configuration are included in the manual.

Management of an affiliated Physics Residency Program using a commercial software tool.

PubMed

Zacarias, Albert S; Mills, Michael D

2010-06-01

A review of commercially available allied health educational management software tools was performed to evaluate their capacity to manage program data associated with a CAMPEP-accredited Therapy Physics Residency Program. Features of these software tools include: a) didactic course reporting and organization, b) competency reporting by topic, category and didactic course, c) student time management and accounting, and d) student patient case reporting by topic, category and course. The software package includes features for recording school administrative information; setting up lists of courses, faculty, clinical sites, categories, competencies, and time logs; and the inclusion of standardized external documents. There are provisions for developing evaluation and survey instruments. The mentors and program may be evaluated by residents, and residents may be evaluated by faculty members using this feature. Competency documentation includes the time spent on the problem or with the patient, time spent with the mentor, date of the competency, and approval by the mentor and program director. Course documentation includes course and lecture title, lecturer, topic information, date of lecture and approval by the Program Director. These software tools have the facility to include multiple clinical sites, with local subadministrators having the ability to approve competencies and attendance at clinical conferences. In total, these software tools have the capability of managing all components of a CAMPEP-accredited residency program. The application database lends the software to the support of multiple affiliated clinical sites within a single residency program. Such tools are a critical and necessary component if the medical physics profession is to meet the projected needs for qualified medical physicists in future years.

Research and Design Issues Concerning the Development of Educational Software for Children. Technical Report No. 14.

ERIC Educational Resources Information Center

Char, Cynthia

Several research and design issues to be considered when creating educational software were identified by a field test evaluation of three types of innovative software created at Bank Street College: (1) Probe, software for measuring and graphing temperature data; (2) Rescue Mission, a navigation game that illustrates the computer's use for…

A program downloader and other utility software for the DATAC bus monitor unit

NASA Technical Reports Server (NTRS)

Novacki, Stanley M., III

1987-01-01

A set or programs designed to facilitate software testing on the DATAC Bus Monitor is described. By providing a means to simplify program loading, firmware generation, and subsequent testing of programs, the overhead involved in software evaluation is reduced and that time is used more productively in performance, analysis and improvement of current software.

Comprehensive evaluation of untargeted metabolomics data processing software in feature detection, quantification and discriminating marker selection.

PubMed

Li, Zhucui; Lu, Yan; Guo, Yufeng; Cao, Haijie; Wang, Qinhong; Shui, Wenqing

2018-10-31

Data analysis represents a key challenge for untargeted metabolomics studies and it commonly requires extensive processing of more than thousands of metabolite peaks included in raw high-resolution MS data. Although a number of software packages have been developed to facilitate untargeted data processing, they have not been comprehensively scrutinized in the capability of feature detection, quantification and marker selection using a well-defined benchmark sample set. In this study, we acquired a benchmark dataset from standard mixtures consisting of 1100 compounds with specified concentration ratios including 130 compounds with significant variation of concentrations. Five software evaluated here (MS-Dial, MZmine 2, XCMS, MarkerView, and Compound Discoverer) showed similar performance in detection of true features derived from compounds in the mixtures. However, significant differences between untargeted metabolomics software were observed in relative quantification of true features in the benchmark dataset. MZmine 2 outperformed the other software in terms of quantification accuracy and it reported the most true discriminating markers together with the fewest false markers. Furthermore, we assessed selection of discriminating markers by different software using both the benchmark dataset and a real-case metabolomics dataset to propose combined usage of two software for increasing confidence of biomarker identification. Our findings from comprehensive evaluation of untargeted metabolomics software would help guide future improvements of these widely used bioinformatics tools and enable users to properly interpret their metabolomics results. Copyright © 2018 Elsevier B.V. All rights reserved.

The Blue Dog: evaluation of an interactive software program to teach young children how to interact safely with dogs.

PubMed

Schwebel, David C; Morrongiello, Barbara A; Davis, Aaron L; Stewart, Julia; Bell, Melissa

2012-04-01

Pre-post-randomized design evaluated The Blue Dog, a dog safety software program. 76 children aged 3.5-6 years completed 3 tasks to evaluate dog safety pre- and postintervention: (a) pictures (recognition of safe/risky behavior), (b) dollhouse (recall of safe behavior via simulated dollhouse scenarios), and (c) live dog (actual behavior with unfamiliar live dog). Following preintervention evaluation, children were randomly assigned to dog or fire safety conditions, each involving 3 weeks of home computer software use. Children using Blue Dog had greater change in recognition of risky dog situations than children learning fire safety. No between-group differences emerged in recall (dollhouse) or engagement (live-dog) in risky behavior. Families enjoyed using the software. Blue Dog taught children knowledge about safe engagement with dogs, but did not influence recall or implementation of safe behaviors. Dog bites represent a significant pediatric injury concern and continued development of effective interventions is needed.

Comparison of Dental Students' Self-Directed, Faculty, and Software-Based Assessments of Dental Anatomy Wax-Ups: A Retrospective Study.

PubMed

Garrett, Pauline H; Faraone, Karen L; Patzelt, Sebastian B M; Keaser, Michael L

2015-12-01

Little is known about self-directed and self-reflective assessment in preclinical dental curricula. The aim of this study was to evaluate a visual dental anatomy teaching tool to train dental students to self-assess their dental anatomy wax carving practical examinations. The students self-assessed two waxing practical examinations (tooth #8 and tooth #19) using high-quality digital images in an assessment tool incorporated into a digital testing program. Student self-assessments were compared to the faculty evaluations and the results of a software-based evaluation tool (E4D Compare). Out of a total 130 first-year dental students at one U.S. dental school, wax-ups from 57 participants were available for this study. The assessment data were submitted to statistical analyses (p<0.05). For tooth #8, the student self-assessments were significantly different from the faculty and software assessments at a 400 micrometer level of tolerance (p=0.036), whereas the faculty assessment was not significantly different from the software assessment at a 300 micrometer level of tolerance (p=0.69). The evaluation of tooth #19 resulted in no significant differences between faculty members (p=0.94) or students (p=0.21) and the software at a level of tolerance of 400 micrometers. This study indicates that students can learn to self-assess their work using self-reflection in conjunction with faculty guidance and that it may be possible to use software-based evaluation tools to assist in faculty calibration and as objective grading tools.

Comparison of software tools for kinetic evaluation of chemical degradation data.

PubMed

Ranke, Johannes; Wöltjen, Janina; Meinecke, Stefan

2018-01-01

For evaluating the fate of xenobiotics in the environment, a variety of degradation or environmental metabolism experiments are routinely conducted. The data generated in such experiments are evaluated by optimizing the parameters of kinetic models in a way that the model simulation fits the data. No comparison of the main software tools currently in use has been published to date. This article shows a comparison of numerical results as well as an overall, somewhat subjective comparison based on a scoring system using a set of criteria. The scoring was separately performed for two types of uses. Uses of type I are routine evaluations involving standard kinetic models and up to three metabolites in a single compartment. Evaluations involving non-standard model components, more than three metabolites or more than a single compartment belong to use type II. For use type I, usability is most important, while the flexibility of the model definition is most important for use type II. Test datasets were assembled that can be used to compare the numerical results for different software tools. These datasets can also be used to ensure that no unintended or erroneous behaviour is introduced in newer versions. In the comparison of numerical results, good agreement between the parameter estimates was observed for datasets with up to three metabolites. For the now unmaintained reference software DegKinManager/ModelMaker, and for OpenModel which is still under development, user options were identified that should be taken care of in order to obtain results that are as reliable as possible. Based on the scoring system mentioned above, the software tools gmkin, KinGUII and CAKE received the best scores for use type I. Out of the 15 software packages compared with respect to use type II, again gmkin and KinGUII were the first two, followed by the script based tool mkin, which is the technical basis for gmkin, and by OpenModel. Based on the evaluation using the system of criteria mentioned above and the comparison of numerical results for the suite of test datasets, the software tools gmkin, KinGUII and CAKE are recommended for use type I, and gmkin and KinGUII for use type II. For users that prefer to work with scripts instead of graphical user interfaces, mkin is recommended. For future software evaluations, it is recommended to include a measure for the total time that a typical user needs for a kinetic evaluation into the scoring scheme. It is the hope of the authors that the publication of test data, source code and overall rankings foster the evolution of useful and reliable software in the field.

NASA software specification and evaluation system design, part 1

NASA Technical Reports Server (NTRS)

1976-01-01

The research to develop methods for reducing the effort expended in software and verification is reported. The development of a formal software requirements methodology, a formal specifications language, a programming language, a language preprocessor, and code analysis tools are discussed.

Software for math and science education for the deaf.

PubMed

Adamo-Villani, Nicoletta; Wilbur, Ronnie

2010-01-01

In this article, we describe the development of two novel approaches to teaching math and science concepts to deaf children using 3D animated interactive software. One approach, Mathsigner, is non-immersive and the other, SMILE, is a virtual reality immersive environment. The content is curriculum-based, and the animated signing characters are constructed with state-of-the art technology and design. We report preliminary development findings of usability and appeal based on programme features (e.g. 2D/3D, immersiveness, interaction type, avatar and interface design) and subject features (hearing status, gender and age). Programme features of 2D/3D, immersiveness and interaction type were very much affected by subject features. Among subject features, we find significant effects of hearing status (deaf children take longer time and make more mistakes than hearing children) and gender (girls take longer than boys; girls prefer immersive environments rather than desktop presentation; girls are more interested in content than technology compared to boys). For avatar type, we found a preference for seamless, deformable characters over segmented ones. For interface comparisons, there were no subject effects, but an animated interface resulted in reduced time to task completion compared to static interfaces with and without sound and highlighting. These findings identify numerous features that affect software design and appeal and suggest that designers must be careful in their assumptions during programme development.

The Liquid Argon Software Toolkit (LArSoft): Goals, Status and Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pordes, Rush; Snider, Erica

LArSoft is a toolkit that provides a software infrastructure and algorithms for the simulation, reconstruction and analysis of events in Liquid Argon Time Projection Chambers (LArTPCs). It is used by the ArgoNeuT, LArIAT, MicroBooNE, DUNE (including 35ton prototype and ProtoDUNE) and SBND experiments. The LArSoft collaboration provides an environment for the development, use, and sharing of code across experiments. The ultimate goal is to develop fully automatic processes for reconstruction and analysis of LArTPC events. The toolkit is based on the art framework and has a well-defined architecture to interface to other packages, including to GEANT4 and GENIE simulation softwaremore » and the Pandora software development kit for pattern recognition. It is designed to facilitate and support the evolution of algorithms including their transition to new computing platforms. The development of the toolkit is driven by the scientific stakeholders involved. The core infrastructure includes standard definitions of types and constants, means to input experiment geometries as well as meta and event- data in several formats, and relevant general utilities. Examples of algorithms experiments have contributed to date are: photon-propagation; particle identification; hit finding, track finding and fitting; electromagnetic shower identification and reconstruction. We report on the status of the toolkit and plans for future work.« less

Network Monitor and Control of Disruption-Tolerant Networks

NASA Technical Reports Server (NTRS)

Torgerson, J. Leigh

2014-01-01

For nearly a decade, NASA and many researchers in the international community have been developing Internet-like protocols that allow for automated network operations in networks where the individual links between nodes are only sporadically connected. A family of Disruption-Tolerant Networking (DTN) protocols has been developed, and many are reaching CCSDS Blue Book status. A NASA version of DTN known as the Interplanetary Overlay Network (ION) has been flight-tested on the EPOXI spacecraft and ION is currently being tested on the International Space Station. Experience has shown that in order for a DTN service-provider to set up a large scale multi-node network, a number of network monitor and control technologies need to be fielded as well as the basic DTN protocols. The NASA DTN program is developing a standardized means of querying a DTN node to ascertain its operational status, known as the DTN Management Protocol (DTNMP), and the program has developed some prototypes of DTNMP software. While DTNMP is a necessary component, it is not sufficient to accomplish Network Monitor and Control of a DTN network. JPL is developing a suite of tools that provide for network visualization, performance monitoring and ION node control software. This suite of network monitor and control tools complements the GSFC and APL-developed DTN MP software, and the combined package can form the basis for flight operations using DTN.

Profile of NASA software engineering: Lessons learned from building the baseline

NASA Technical Reports Server (NTRS)

Hall, Dana; Mcgarry, Frank

1993-01-01

It is critically important in any improvement activity to first understand the organization's current status, strengths, and weaknesses and, only after that understanding is achieved, examine and implement promising improvements. This fundamental rule is certainly true for an organization seeking to further its software viability and effectiveness. This paper addresses the role of the organizational process baseline in a software improvement effort and the lessons we learned assembling such an understanding for NASA overall and for the NASA Goddard Space Flight Center in particular. We discuss important, core data that must be captured and contrast that with our experience in actually finding such information. Our baselining efforts have evolved into a set of data gathering, analysis, and crosschecking techniques and information presentation formats that may prove useful to others seeking to establish similar baselines for their organization.

[Intergenerational differences on the nutritional status and lifestyle of Chinese residents].

PubMed

Su, Chang; Wang, Huijun; Zhang, Jiguo; Du, Wenwen; Wang, Zhihong; Zhang, Ji; Zhai, Fengying; Zhang, Bing

2012-05-01

To study the diversities on nutritional status and lifestyle of adult Chinese residents born in different years. The data of healthy adult residents born in the 1960s and 1980s were selected from the CHNS 1993 and 2009. Information on physical examination, nutrient intake and lifestyle factors were used as indicators to evaluate the nutritional status of residents; data was analyzed by SAS and STATA software. (1) Weight, height, BMI, waist circumference, hip circumference, waist-hip ratio, skin fold thickness, overweight/obesity, hypertension rate of residents born in the 1980s were all significantly higher than residents born in the 1960s. (2) Dietary fats intake, percentage of energy contributed from total fat, cholesterol intake, calcium intake and the rate of energy and cholesterol intake exceeding the Chinese dietary reference intakes (Chinese DRIs) of residents born in the 1980s were all significantly higher than residents born in the 1960s, however, the energy intake,carbohydrate intake, salt intake, vitamin B1 intake, vitamin C intake, the energy contributed from carbohydrates and the rate of vitamin B1 intake and vitamin C intake exceeding the Chinese DRIs of residents born in the 1980s were all significantly lower in residents born in the 1960s. (3) The smoking rates, rates of drinking tea and the percentage of population engaged in medium or vigorous physical activity of residents born in the 1980s were all significantly lower than residents born in the 1960s. The diversity of nutritional status and lifestyle in different generations could not be ignored, and the phenomenon of increased prevalence of nutrition-related non-communicable diseases (NR-NCDs) of residents born in 1980s should be concerned.

Effect of Training School Teachers on Oral Hygiene Status of 8-10 Years Old Government School Children of Udaipur City, India

PubMed Central

Bhat, Nagesh; Asawa, Kailash; Tak, Mridula; Singh, Anukriti; Shinde, Kushal; Gandhi, Neha; Doshi, Astha

2016-01-01

Introduction Provision of oral health knowledge to the children by their teachers at the school level can prove to be more fruitful because it is the time period during which the children begin to learn the basic oral hygiene practices and are most prone to dental caries. Aim This study was carried out to assess the effect of training school teachers on oral hygiene status of 8-10 years old government school children of Udaipur city, India. Materials and Methods A total of nine school teachers and 279, 8-10 year old school children from two government schools were included in the study. The questionnaire on oral health knowledge and practice contained 17 questions to evaluate the knowledge and practice of children towards oral hygiene before and after the teachers training program. Baseline and six months post training data on oral health knowledge and practice was obtained by the questionnaire method. Baseline and six months post training data on oral hygiene status was obtained by OHI-S Index. Statistical analysis was done using software SPSS 22, the test used were McNemar’s test, paired t-test. Results Pre and post training data were compared and it was found that there was a significant improvement in oral health knowledge and practices of school teachers and children. Also oral hygiene status of school children was significantly improved after the program. Conclusion Results of the present study suggest that experiential learning is an effective school based oral health education method for improvement of oral hygiene in primary school children. PMID:27656573

MicroSIFT Courseware Evaluations. [Set 11 (223-259), Set 12 (260-293), and a Special Set of 99 LIBRA Reviews of Junior High School Science Software, Including Subject and Title Indexes Covering Sets 1-12 and Special Set L].

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This document consists of 170 microcomputer software package evaluations prepared by the MicroSIFT (Microcomputer Software and Information for Teachers) Clearinghouse at the Northwest Regional Education Laboratory. Set 11 consists of 37 packages. Set 12 consists of 34 packages. A special unnumbered set, entitled LIBRA Reviews, treats 99 packages…

Organization and use of a Software/Hardware Avionics Research Program (SHARP)

NASA Technical Reports Server (NTRS)

Karmarkar, J. S.; Kareemi, M. N.

1975-01-01

The organization and use is described of the software/hardware avionics research program (SHARP) developed to duplicate the automatic portion of the STOLAND simulator system, on a general-purpose computer system (i.e., IBM 360). The program's uses are: (1) to conduct comparative evaluation studies of current and proposed airborne and ground system concepts via single run or Monte Carlo simulation techniques, and (2) to provide a software tool for efficient algorithm evaluation and development for the STOLAND avionics computer.

Physical Therapy Machine

NASA Technical Reports Server (NTRS)

1989-01-01

Loredan Biomedical, Inc.'s LIDO, a computerized physical therapy system, was purchased by NASA in 1985 for evaluation as a Space Station Freedom exercise program. In 1986, while involved in an ARC muscle conditioning project, Malcom Bond, Loredan's chairman, designed an advanced software package for NASA which became the basis for LIDOSOFT software used in the commercially available system. The system employs a "proprioceptive" software program which perceives internal body conditions, induces perturbations to muscular effort and evaluates the response. Biofeedback on a screen allows a patient to observe his own performance.

Autonomous Real Time Requirements Tracing

NASA Technical Reports Server (NTRS)

Plattsmier, George I.; Stetson, Howard K.

2014-01-01

One of the more challenging aspects of software development is the ability to verify and validate the functional software requirements dictated by the Software Requirements Specification (SRS) and the Software Detail Design (SDD). Insuring the software has achieved the intended requirements is the responsibility of the Software Quality team and the Software Test team. The utilization of Timeliner-TLX(sup TM) Auto-Procedures for relocating ground operations positions to ISS automated on-board operations has begun the transition that would be required for manned deep space missions with minimal crew requirements. This transition also moves the auto-procedures from the procedure realm into the flight software arena and as such the operational requirements and testing will be more structured and rigorous. The autoprocedures would be required to meet NASA software standards as specified in the Software Safety Standard (NASASTD- 8719), the Software Engineering Requirements (NPR 7150), the Software Assurance Standard (NASA-STD-8739) and also the Human Rating Requirements (NPR-8705). The Autonomous Fluid Transfer System (AFTS) test-bed utilizes the Timeliner-TLX(sup TM) Language for development of autonomous command and control software. The Timeliner- TLX(sup TM) system has the unique feature of providing the current line of the statement in execution during real-time execution of the software. The feature of execution line number internal reporting unlocks the capability of monitoring the execution autonomously by use of a companion Timeliner-TLX(sup TM) sequence as the line number reporting is embedded inside the Timeliner-TLX(sup TM) execution engine. This negates I/O processing of this type data as the line number status of executing sequences is built-in as a function reference. This paper will outline the design and capabilities of the AFTS Autonomous Requirements Tracker, which traces and logs SRS requirements as they are being met during real-time execution of the targeted system. It is envisioned that real time requirements tracing will greatly assist the movement of autoprocedures to flight software enhancing the software assurance of auto-procedures and also their acceptance as reliable commanders

Autonomous Real Time Requirements Tracing

NASA Technical Reports Server (NTRS)

Plattsmier, George; Stetson, Howard

2014-01-01

One of the more challenging aspects of software development is the ability to verify and validate the functional software requirements dictated by the Software Requirements Specification (SRS) and the Software Detail Design (SDD). Insuring the software has achieved the intended requirements is the responsibility of the Software Quality team and the Software Test team. The utilization of Timeliner-TLX(sup TM) Auto- Procedures for relocating ground operations positions to ISS automated on-board operations has begun the transition that would be required for manned deep space missions with minimal crew requirements. This transition also moves the auto-procedures from the procedure realm into the flight software arena and as such the operational requirements and testing will be more structured and rigorous. The autoprocedures would be required to meet NASA software standards as specified in the Software Safety Standard (NASASTD- 8719), the Software Engineering Requirements (NPR 7150), the Software Assurance Standard (NASA-STD-8739) and also the Human Rating Requirements (NPR-8705). The Autonomous Fluid Transfer System (AFTS) test-bed utilizes the Timeliner-TLX(sup TM) Language for development of autonomous command and control software. The Timeliner-TLX(sup TM) system has the unique feature of providing the current line of the statement in execution during real-time execution of the software. The feature of execution line number internal reporting unlocks the capability of monitoring the execution autonomously by use of a companion Timeliner-TLX(sup TM) sequence as the line number reporting is embedded inside the Timeliner-TLX(sup TM) execution engine. This negates I/O processing of this type data as the line number status of executing sequences is built-in as a function reference. This paper will outline the design and capabilities of the AFTS Autonomous Requirements Tracker, which traces and logs SRS requirements as they are being met during real-time execution of the targeted system. It is envisioned that real time requirements tracing will greatly assist the movement of autoprocedures to flight software enhancing the software assurance of auto-procedures and also their acceptance as reliable commanders.

Oak Ridge Computerized Hierarchical Information System (ORCHIS) status report, July 1973

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brooks, A.A.

1974-01-01

This report summarizes the concepts, software, and contents of the Oak Ridge Computerized Hierarchical Information System. This data analysis and text processing system was developed as an integrated, comprehensive information processing capability to meet the needs of an on-going multidisciplinary research and development organization. (auth)

Status of Ongoing Work in Software TRAs/TRLs

DTIC Science & Technology

2010-04-29

to changes/updates being driven by corporate market dynamics • Changes not under control or under the influence of the PMO! • On programs with long...observed and reported esearc articles, peer- reviewed white papers, point papers, early conceptual models n a ca em c , experimental as c researc

Electronic and Printed Books with and without Adult Support as Sustaining Emergent Literacy

ERIC Educational Resources Information Center

Korat, Ofra; Segal-Drori, Ora; Klien, Pnina

2009-01-01

Emergent literacy (EL) enhancement has been the goal of numerous educational programs for years, especially for children from low socioeconomic statuses (LSES) (Snow, 1994; Whitehurst, Zevebergen, Crone, Schultz, Velting, & Fischel, 1999). During the past decade, technology software, including electronic books (e-books), have become…

Logistics hardware and services control system

NASA Technical Reports Server (NTRS)

Koromilas, A.; Miller, K.; Lamb, T.

1973-01-01

Software system permits onsite direct control of logistics operations, which include spare parts, initial installation, tool control, and repairable parts status and control, through all facets of operations. System integrates logistics actions and controls receipts, issues, loans, repairs, fabrications, and modifications and assets in predicting and allocating logistics parts and services effectively.

Collecting and Using Networked Statistics: Current Status, Future Goals

ERIC Educational Resources Information Center

Hiott, Judith

2004-01-01

For more than five years the Houston Public Library has collected statistics for measuring networked collections and services based on emerging guidelines. While the guidelines have provided authority and stability to the process, the clarification process continues. The development of information discovery software, such as federated search tools…

Laser Printing for a Variety of Library Applications.

ERIC Educational Resources Information Center

Kelly, Glen J.

1988-01-01

Summarizes the current status of laser printers in terms of cost, hardware and software requirements, measurement and operational considerations, ease of use, and maintenance. The cost effectiveness of laser printing in libraries for applications such as spine labels, purchase orders, and reports, is explored. (9 notes with references) (CLB)

Proceedings of the 5th Annual Users' Conference

NASA Technical Reports Server (NTRS)

Szczur, M. (Editor); Harris, E. (Editor)

1985-01-01

The Transportable Applications Executive (TAE) was conceived in 1979. It was proposed to be a general purpose software executive that could be applied in various systems. The success of this concept and of TAE was demonstrated. Topics included: TAE current status; TAE development; TAE applications; and UNIX emphasis.

DIVA V2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

CHEN, JOANNA; SIMIRENKO, LISA; TAPASWI, MANJIRI

The DIVA software interfaces a process in which researchers design their DNA with a web-based graphical user interface, submit their designs to a central queue, and a few weeks later receive their sequence-verified clonal constructs. Each researcher independently designs the DNA to be constructed with a web-based BioCAD tool, and presses a button to submit their designs to a central queue. Researchers have web-based access to their DNA design queues, and can track the progress of their submitted designs as they progress from "evaluation", to "waiting for reagents", to "in progress", to "complete". Researchers access their completed constructs through themore » central DNA repository. Along the way, all DNA construction success/failure rates are captured in a central database. Once a design has been submitted to the queue, a small number of dedicated staff evaluate the design for feasibility and provide feedback to the responsible researcher if the design is either unreasonable (e.g., encompasses a combinatorial library of a billion constructs) or small design changes could significantly facilitate the downstream implementation process. The dedicated staff then use DNA assembly design automation software to optimize the DNA construction process for the design, leveraging existing parts from the DNA repository where possible and ordering synthetic DNA where necessary. SynTrack software manages the physical locations and availability of the various requisite reagents and process inputs (e.g., DNA templates). Once all requisite process inputs are available, the design progresses from "waiting for reagents" to "in progress" in the design queue. Human-readable and machine-parseable DNA construction protocols output by the DNA assembly design automation software are then executed by the dedicated staff exploiting lab automation devices wherever possible. Since the all employed DNA construction methods are sequence-agnostic, standardized (utilize the same enzymatic master mixes and reaction conditions), completely independent DNA construction tasks can be aggregated into the same multi-well plates and pursued in parallel. The resulting sets of cloned constructs can then be screened by high-throughput next-gen sequencing platforms for sequence correctness. A combination of long read-length (e.g., PacBio) and paired-end read platforms (e.g., Illumina) would be exploited depending the particular task at hand (e.g., PacBio might be sufficient to screen a set of pooled constructs with significant gene divergence). Post sequence verification, designs for which at least one correct clone was identified will progress to a "complete" status, while designs for which no correct clones wereidentified will progress to a "failure" status. Depending on the failure mode (e.g., no transformants), and how many prior attempts/variations of assembly protocol have been already made for a given design, subsequent attempts may be made or the design can progress to a "permanent failure" state. All success and failure rate information will be captured during the process, including at which stage a given clonal construction procedure failed (e.g., no PCR product) and what the exact failure was (e.g. assembly piece 2 missing). This success/failure rate data can be leveraged to refine the DNA assembly design process.« less

'Ten Golden Rules' for Designing Software in Medical Education: Results from a Formative Evaluation of DIALOG.

ERIC Educational Resources Information Center

Jha, Vikram; Duffy, Sean

2002-01-01

Reports the results of an evaluation of Distance Interactive Learning in Obstetrics and Gynecology (DIALOG) which is an electronic program for continuing education. Presents 10 golden rules for designing software for medical practitioners. (Contains 26 references.) (Author/YDS)