Sample records for examining technical quality

  1. Radiographic technical quality of root canal treatment performed by a new rotary single-file system.

    PubMed

    Colombo, Marco; Bassi, Cristina; Beltrami, Riccardo; Vigorelli, Paolo; Spinelli, Antonio; Cavada, Andrea; Dagna, Alberto; Chiesa, Marco; Poggio, Claudio

    2017-01-01

    The aim of the present study was to evaluate radiographically the technical quality of root canal filling performed by postgraduate students with a new single-file Nickel-Titanium System (F6 Skytaper Komet) in clinical practice. Records of 74 patients who had received endodontic treatment by postgraduate students at the School of Dentistry, Faculty of Medicine, University of Pavia in the period between September 2015 and April 2016 were collected and examined: the final sample consisted 114 teeth and 204 root canals. The quality of endodontic treatment was evaluated by examining the length of the filling in relation to the radiographic apex, the density of the obturation according to the presence of voids and the taper of root canal filling. Chi-squared analysis was used to determine statistically significant differences between the technical quality of root fillings according to tooth's type, position and curvature. The results showed that 75,49%, 82,84% and 90,69% of root filled canals had adequate length, density and taper respectively. Overall, the technical quality of root canal fillings performed by postgraduates students was acceptable in 60,78% of the cases.

  2. Testing Teacher Candidates: The Role of Licensure Tests in Improving Teacher Quality.

    ERIC Educational Resources Information Center

    Mitchell, Karen J., Ed.; Robinson, David Z., Ed.; Plake, Barbara S., Ed.; Knowles, Kaeli T., Ed.

    This book examines the appropriateness and technical quality of teacher licensure tests currently in use, evaluating teacher licensure tests and examining the use of tests to hold states and institutions of higher education accountable for the quality of teacher preparation and licensure. It also suggests alternatives for developing and assessing…

  3. Measurement of Perceived and Technical Quality of Care for Depression in Racially and Ethnically Diverse Groups.

    PubMed

    Leff, H Stephen; Chow, Clifton; Wieman, Dow A; Ostrow, Laysha; Cortés, Dharma E; Harris, Treniece

    2016-08-01

    Measurement of patient satisfaction is now considered essential for providing patient centered care and is an important tool for addressing health care disparities. However, little is known about how ethnically and racially diverse (ERD) groups differ in how they perceive quality, and widely used instruments for measuring perceived quality give little attention to cultural elements of care. This study examined the relationship between the culturally determined beliefs and expectations of four ERD groups (African Americans, Latinos, Portuguese-speakers, and Haitians, total N = 160) and the technical quality of treatment for depression provided in four "culturally-specific" primary care clinics. Using data from the Experiences of Care and Health Outcomes survey, chart reviews and focus groups, the study addressed a set of questions related to the psychometric properties of perceived care measures and the technical quality of care. The groups differed in preferred cultural elements except all preferred inclusion of religion. They did not differ in overall perceived quality. Technical quality was higher for Portuguese and Haitians than for African Americans and Latinos. Implications of group differences for measuring quality are discussed.

  4. Collaborating for Success: Team Teaching the Engineering Technical Thesis

    ERIC Educational Resources Information Center

    Keating, Terrence; Long, Mike

    2012-01-01

    This paper will examine the collaborative teaching process undertaken at College of the North Atlantic-Qatar (CNA-Q) by Engineering and the Communication faculties to improve the overall quality of engineering students' capstone projects known as the Technical Thesis. The Technical Thesis is divided into two separate components: a proposal stage…

  5. Is perception of quality more important than technical quality in patient video cases?

    PubMed

    Roland, Damian; Matheson, David; Taub, Nick; Coats, Tim; Lakhanpaul, Monica

    2015-08-13

    The use of video cases to demonstrate key signs and symptoms in patients (patient video cases or PVCs) is a rapidly expanding field. The aims of this study were to evaluate whether the technical quality, or judgement of quality, of a video clip influences a paediatrician's judgment on acuity of the case and assess the relationship between perception of quality and the technical quality of a selection of video clips. Participants (12 senior consultant paediatricians attending an examination workshop) individually categorised 28 PVCs into one of 3 possible acuities and then described the quality of the image seen. The PVCs had been converted into four different technical qualities (differing bit rates ranging from excellent to low quality). Participants' assessment of quality and the actual industry standard of the PVC were independent (333 distinct observations, spearmans rho = 0.0410, p = 0.4564). Agreement between actual acuity and participants' judgement was generally good at higher acuities but moderate at medium/low acuities of illness (overall correlation 0.664). Perception of the quality of the clip was related to correct assignment of acuity regardless of the technical quality of the clip (number of obs = 330, z = 2.07, p = 0.038). It is important to benchmark PVCs prior to use in learning resources as experts may not agree on the information within, or quality of, the clip. It appears, although PVCs may be beneficial in a pedagogical context, the perception of quality of clip may be an important determinant of an expert's decision making.

  6. EFFECT OF QUALITY OF CHEST RADIOGRAPHS ON THE CATEGORIZATION OF COALWORKERS' PNEUMOCONIOSIS

    PubMed Central

    Pearson, N. G.; Ashford, J. R.; Morgan, D. C.; Pasqual, R. S. H.; Rae, S.

    1965-01-01

    An investigation into the effect of variations in radiographic technical quality on pneumoconiosis reading standards in the Pneumoconiosis Field Research of the National Coal Board is reported. From the group of men for whom retake films had been obtained because of unsatisfactory technique of the originals, a trial series of pairs and triplets of films showing differing technique was assembled. A total of 778 films was read for pneumoconiosis and assessed for technical quality by four readers. The quality was assessed in terms of three separate factors, viz., density (at high, medium, and low levels), contrast (satisfactory and unsatisfactory), and definition (satisfactory and unsatisfactory). The intra and inter observer consistency of this assessment was estimated, and the effect of techical quality on the reading of pneumoconiosis category was determined. A tendency for lower pneumoconiosis readings to be recorded on films with unsatisfactory technique was demonstrated. A random 10% sample of the best available films (those on which routine pneumoconiosis readings have been made) for all men examined since the beginning of the research was also read for technical quality. Of the total of 4,188 films, 80% were considered satisfactory. It appeared that films taken on second surveys were, in general, of rather better quality than those taken on first surveys. The physical attributes of the men examined had some effect on the technical standards, the proportion of unsatisfactory films rising with increasing values of the weight/sitting height ratio and being greater in men with pneumoconiosis categories 1 and A and in the middle age group. The tendency for lower pneumoconiosis readings to be recorded on films with unsatisfactory technique is in contrast to the results of work previously published. Different criteria for the selection of films and the assessment of technical quality, and possibly differing reading conventions, make comparison with other work difficult. PMID:14278806

  7. [Quality standards for duplex ultrasonographic assessment (duplex us) of abdominal aortic stent grafts].

    PubMed

    Diard, A; Becker, F; Pichot, O

    2017-05-01

    The quality standards of the French Society of Vascular Medicine for the ultrasound assessment of lower limb arteries in vascular medicine practice are based on the principle that these examinations have to meet two requirements: technical know-how (knowledge of devices and methodologies); medical know-how (level of examination matching the indication and purpose of the examination, interpretation and critical analysis of results). To describe an optimal level of examination adjusted to the indication or clinical hypothesis; to establish harmonious practices, methodologies, terminologies, results description and report; to provide good practice reference points and to promote a high quality process. The three levels of examination, indications and objectives for each level; the reference standard examination (level 2) and its variants according to indications; the minimal content of the exam report, the medical conclusion letter to the corresponding physician (synthesis, conclusion and management suggestions); commented glossary (anatomy, hemodynamics, signs and symptoms); technical basis; device settings. Here, we discuss duplex ultrasound for the supervision of the aortic stent grafts. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  8. On the Rise: The Role of Career and Technical Education in Arizona's Future. 21st Century Career and Technical Education Pathways

    ERIC Educational Resources Information Center

    Gupta, Sapna

    2013-01-01

    This report examines the potential of Career and Technical Education (CTE) in Arizona in terms of providing employers certified skills need to compete regionally, nationally and internationally and students avenues for higher education, quality of life and job satisfaction. An appendix on "Estimating the Effect of CTE on High School…

  9. Water Quality-Chapter 5 for National Wetland Condition Assessment technical report

    EPA Science Inventory

    Objectives of the water quality data analyses presented here are to examine the extent to which water quality could be sampled across US wetlands, to evaluate the various measurement endpoints obtained (e.g., variability, repeatability, information content), to present broad patt...

  10. Technical aspects of contrast-enhanced ultrasound (CEUS) examinations: tips and tricks.

    PubMed

    Greis, C

    2014-01-01

    Ultrasound contrast agents have substantially extended the clinical value of ultrasound, allowing the assessment of blood flow and distribution in real-time down to microcapillary level. Selective imaging of contrast agent signals requires a contrast-specific imaging mode on the ultrasound scanner, allowing real-time separation of tissue and contrast agent signals. The creation of a contrast image requires a specific interaction between the insonated ultrasound wave and the contrast agent microbubbles, leading to persistent oscillation of the bubbles. Several technical and procedural parameters have a significant influence on the quality of CEUS images and should be controlled carefully to obtain good image quality and a reliable diagnosis. Achieving the proper balance between the respective parameters is a matter of technical knowledge and experience. Appropriate training and education should be mandatory for every investigator performing CEUS examinations.

  11. Examining Educators' and Employers' Perceptions on Career and Technical Education Graduates' Employability Skills for the Labor Market in Jordan

    ERIC Educational Resources Information Center

    Al-Alawneh, Muhammad Khaled

    2009-01-01

    Preparing skilled and knowledgeable workforce that fits the labor market requires continued collaboration between education and work. Studying educators' and employers' perspectives on technical and non-technical skills may result in improving the quality of the graduates to compete on the level of the local as well as the global labor market.…

  12. Integrating Microscopic Analysis into Existing Quality Assurance Processes

    NASA Astrophysics Data System (ADS)

    Frühberger, Peter; Stephan, Thomas; Beyerer, Jürgen

    When technical goods, like mainboards and other electronic components, are produced, quality assurance (QA) is very important. To achieve this goal, different optical microscopes can be used to analyze a variety of specimen to gain comprehensive information by combining the acquired sensor data. In many industrial processes, cameras are used to examine these technical goods. Those cameras can analyze complete boards at once and offer a high level of accuracy when used for completeness checks. When small defects, e.g. soldered points, need to be examined in detail, those wide area cameras are limited. Microscopes with large magnification need to be used to analyze those critical areas. But microscopes alone cannot fulfill this task within a limited time schedule, because microscopic analysis of complete motherboards of a certain size is time demanding. Microscopes are limited concerning their depth of field and depth of focus, which is why additional components like XY moving tables need to be used to examine the complete surface. Yet today's industrial production quality standards require a 100 % control of the soldered components within a given time schedule. This level of quality, while keeping inspection time low, can only be achieved when combining multiple inspection devices in an optimized manner. This paper presents results and methods of combining industrial cameras with microscopy instrumenting a classificatory based approach intending to keep already deployed QA processes in place but extending them with the purpose of increasing the quality level of the produced technical goods while maintaining high throughput.

  13. Case Studies in Industry/TAFE Liaison: Success Factors.

    ERIC Educational Resources Information Center

    Anderson, Tony

    This study examines what makes cooperative arrangements between industry and Technical and Further Education (TAFE) in Australia successful. A literature review highlighted the importance of the provision of high quality technical education that meets the needs of the client. A range of innovative or entrepreneurial examples of industry/TAFE…

  14. Impact of Medicare Advantage penetration and hospital competition on technical efficiency of nursing care in US intensive care units.

    PubMed

    Min, Ari; Scott, Linda D; Park, Chang; Vincent, Catherine; Ryan, Catherine J; Lee, Taewha

    2018-04-10

    This study aimed to evaluate technical efficiency of US intensive care units and determine the effects of environmental factors on technical efficiency in providing quality of nursing care. Data were obtained from the 2014 National Database of Nursing Quality Indicators and the Centers for Medicare and Medicaid Services. Data envelopment analysis was used to estimate technical efficiency for each intensive care unit. Multilevel modeling was used to determine the effects of environmental factors on technical efficiency. Overall, Medicare Advantage penetration and hospital competition in a market did not create pressure for intensive care units to become more efficient by reducing their inputs. However, these 2 environmental factors showed positive influences on technical efficiency in intensive care units with certain levels of technical efficiency. The implications of the study results for management strategies and health policy may vary according to the levels of technical efficiency in intensive care units. Further studies are needed to examine why and how intensive care units with particular levels of technical efficiency are differently affected by certain environmental factors. Copyright © 2018 John Wiley & Sons, Ltd.

  15. [Quality standards for ultrasound assessment of the superficial venous system of the lower limbs. Report of the French Society for Vascular Medicine].

    PubMed

    Auvert, J-F; Chleir, F; Coppé, G; Hamel-Desnos, C; Moraglia, L; Pichot, O

    2014-02-01

    The quality standards of the French Society for Vascular Medicine for the ultrasound assessment of the superficial venous system of the lower limbs are based on the two following requirements: technical know-how (mastering the use of ultrasound devices and the method of examination); medical know-how (ability to adapt the methods and scope of the examination to its clinical indications and purpose and to rationally analyze and interpret its results). To describe an optimal method of examination in relation to the clinical question and hypothesis; to achieve consistent practice, methods, glossary terminologies and reporting; to provide good practice reference points and to promote a high quality process. The three levels of examination. Their clinical indications and goals. The reference standard examination (level 2) and its variants according to clinical needs. The minimal content of the examination report, the letter to the referring physician (synthesis, conclusion and management suggestions) and iconography. Commented glossary (anatomy, hemodynamics, semiology). Technical basis. Ultrasound devices settings. We discuss of use of Duplex ultrasound for the assessment of the superficial veins of the lower limbs in vascular medicine practice. Copyright © 2014. Published by Elsevier Masson SAS.

  16. Comparison of Perceived and Technical Healthcare Quality in Primary Health Facilities: Implications for a Sustainable National Health Insurance Scheme in Ghana

    PubMed Central

    Alhassan, Robert Kaba; Duku, Stephen Opoku; Janssens, Wendy; Nketiah-Amponsah, Edward; Spieker, Nicole; van Ostenberg, Paul; Arhinful, Daniel Kojo; Pradhan, Menno; Rinke de Wit, Tobias F.

    2015-01-01

    Background Quality care in health facilities is critical for a sustainable health insurance system because of its influence on clients’ decisions to participate in health insurance and utilize health services. Exploration of the different dimensions of healthcare quality and their associations will help determine more effective quality improvement interventions and health insurance sustainability strategies, especially in resource constrained countries in Africa where universal access to good quality care remains a challenge. Purpose To examine the differences in perceptions of clients and health staff on quality healthcare and determine if these perceptions are associated with technical quality proxies in health facilities. Implications of the findings for a sustainable National Health Insurance Scheme (NHIS) in Ghana are also discussed. Methods This is a cross-sectional study in two southern regions in Ghana involving 64 primary health facilities: 1,903 households and 324 health staff. Data collection lasted from March to June, 2012. A Wilcoxon-Mann-Whitney test was performed to determine differences in client and health staff perceptions of quality healthcare. Spearman’s rank correlation test was used to ascertain associations between perceived and technical quality care proxies in health facilities, and ordered logistic regression employed to predict the determinants of client and staff-perceived quality healthcare. Results Negative association was found between technical quality and client-perceived quality care (coef. = -0.0991, p<0.0001). Significant staff-client perception differences were found in all healthcare quality proxies, suggesting some level of unbalanced commitment to quality improvement and potential information asymmetry between clients and service providers. Overall, the findings suggest that increased efforts towards technical quality care alone will not necessarily translate into better client-perceived quality care and willingness to utilize health services in NHIS-accredited health facilities. Conclusion There is the need to intensify client education and balanced commitment to technical and perceived quality improvement efforts. This will help enhance client confidence in Ghana’s healthcare system, stimulate active participation in the national health insurance, increase healthcare utilization and ultimately improve public health outcomes. PMID:26465935

  17. Comparison of Perceived and Technical Healthcare Quality in Primary Health Facilities: Implications for a Sustainable National Health Insurance Scheme in Ghana.

    PubMed

    Alhassan, Robert Kaba; Duku, Stephen Opoku; Janssens, Wendy; Nketiah-Amponsah, Edward; Spieker, Nicole; van Ostenberg, Paul; Arhinful, Daniel Kojo; Pradhan, Menno; Rinke de Wit, Tobias F

    2015-01-01

    Quality care in health facilities is critical for a sustainable health insurance system because of its influence on clients' decisions to participate in health insurance and utilize health services. Exploration of the different dimensions of healthcare quality and their associations will help determine more effective quality improvement interventions and health insurance sustainability strategies, especially in resource constrained countries in Africa where universal access to good quality care remains a challenge. To examine the differences in perceptions of clients and health staff on quality healthcare and determine if these perceptions are associated with technical quality proxies in health facilities. Implications of the findings for a sustainable National Health Insurance Scheme (NHIS) in Ghana are also discussed. This is a cross-sectional study in two southern regions in Ghana involving 64 primary health facilities: 1,903 households and 324 health staff. Data collection lasted from March to June, 2012. A Wilcoxon-Mann-Whitney test was performed to determine differences in client and health staff perceptions of quality healthcare. Spearman's rank correlation test was used to ascertain associations between perceived and technical quality care proxies in health facilities, and ordered logistic regression employed to predict the determinants of client and staff-perceived quality healthcare. Negative association was found between technical quality and client-perceived quality care (coef. = -0.0991, p<0.0001). Significant staff-client perception differences were found in all healthcare quality proxies, suggesting some level of unbalanced commitment to quality improvement and potential information asymmetry between clients and service providers. Overall, the findings suggest that increased efforts towards technical quality care alone will not necessarily translate into better client-perceived quality care and willingness to utilize health services in NHIS-accredited health facilities. There is the need to intensify client education and balanced commitment to technical and perceived quality improvement efforts. This will help enhance client confidence in Ghana's healthcare system, stimulate active participation in the national health insurance, increase healthcare utilization and ultimately improve public health outcomes.

  18. Factors That Promote Motivation and Academic Engagement in a Career Technical Education Context

    ERIC Educational Resources Information Center

    Loera, Gustavo; Nakamoto, Jonathan; Oh, Youn Joo; Rueda, Robert

    2013-01-01

    Drawing on social cognitive theory, this study examined the relationship between student and school-based factors (e.g., educational aspirations, quality of the program of study, and adults' impact on college enrollment) and students' academic engagement and satisfaction with student life in a career technical education (CTE) setting. This study…

  19. Examining the Factors That Contribute to Successful Database Application Implementation Using the Technology Acceptance Model

    ERIC Educational Resources Information Center

    Nworji, Alexander O.

    2013-01-01

    Most organizations spend millions of dollars due to the impact of improperly implemented database application systems as evidenced by poor data quality problems. The purpose of this quantitative study was to use, and extend, the technology acceptance model (TAM) to assess the impact of information quality and technical quality factors on database…

  20. Improving Quality for Child Care Centers in Greater Philadelphia: An Evaluation of Success by 6®. Technical Appendix. Publication #2016-07B

    ERIC Educational Resources Information Center

    Warner-Richter, Mallory; Lowe, Claire; Tout, Kathryn; Epstein, Dale; Li, Weilin

    2016-01-01

    The Success By 6® (SB6) initiative is designed to support early care and education centers in improving and sustaining quality in Pennsylvania's Keystone STARS Quality Rating and Improvement System (QRIS). The SB6 evaluation report examines implementation and outcomes. The findings have implications for SB6 continous quality improvement process…

  1. Nuclear Technology Series. Course 32: Nondestructive Examination (NDE) Techniques II.

    ERIC Educational Resources Information Center

    Center for Occupational Research and Development, Inc., Waco, TX.

    This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

  2. Nuclear Technology Series. Course 26: Nondestructive Examination (NDE) Techniques I.

    ERIC Educational Resources Information Center

    Center for Occupational Research and Development, Inc., Waco, TX.

    This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

  3. Toward Understanding Non-Centralized Technology Support in Higher Education

    ERIC Educational Resources Information Center

    Jackson, Robert Jonathan

    2009-01-01

    The focus of this research is an examination of service quality provided by non-centralized technology personnel, Local Technical Support Providers (LSPs), at a southern research university. The SERVQUAL instrument was selected to measure service quality of LSPs within the Academic Affairs Division. The rationale for selecting and testing SERVQUAL…

  4. Assessing Quality in Higher Education: New Criteria for Evaluating Students' Satisfaction

    ERIC Educational Resources Information Center

    Zineldin, Mosad; Akdag, Hatice Camgoz; Vasicheva, Valentina

    2011-01-01

    The aim of this research is to present a new quality assurance model (5Qs) and to examine the major factors affecting students' perception of cumulative satisfaction. The model includes behavioural dimensions of student satisfaction. The factors included in this cumulative summation are technical, functional, infrastructure, interaction and…

  5. Effects of technical editing in biomedical journals: a systematic review.

    PubMed

    Wager, Elizabeth; Middleton, Philippa

    2002-06-05

    Technical editing supposedly improves the accuracy and clarity of journal articles. We examined evidence of its effects on research reports in biomedical journals. Subset of a systematic review using Cochrane methods, searching MEDLINE, EMBASE, and other databases from earliest entries to February 2000 by using inclusive search terms; hand searching relevant journals. We selected comparative studies of the effects of editorial processes on original research articles between acceptance and publication in biomedical journals. Two reviewers assessed each study and performed independent data extraction. The 11 studies on technical editing indicate that it improves the readability of articles slightly (as measured by Gunning Fog and Flesch reading ease scores), may improve other aspects of their quality, can increase the accuracy of references and quotations, and raises the quality of abstracts. Supplying authors with abstract preparation instructions had no discernible effect. Considering the time and resources devoted to technical editing, remarkably little is know about its effects or the effects of imposing different house styles. Studies performed at 3 journals employing relatively large numbers of professional technical editors suggest that their editorial processes are associated with increases in readability and quality of articles, but these findings may not be generalizable to other journals.

  6. Alignment of CTE Centers with the Baldrige Quality Award in Education Criteria: Perceptions of Leaders and Faculty

    ERIC Educational Resources Information Center

    Crum-Allen, Patricia; Palmer, Louann Bierlein

    2016-01-01

    This study examined career and technical education (CTE) centers in Michigan and their potential alignment with the Malcolm Baldrige Quality Award in Education. CTE center leaders and their faculty were asked to provide their perceptions of how well their organizations meet Baldrige quality elements, using a version of the Baldrige Assessment…

  7. Improving Curriculum Development Practices in a Technical Vocational Community College: Examining Effects of a Professional Development Arrangement for Middle Managers

    ERIC Educational Resources Information Center

    Albashiry, Nabeel M.; Voogt, Joke M.; Pieters, Jules M.

    2015-01-01

    Learning about curriculum development is critical for middle managers of technical vocational institutions in order to assume curriculum leadership in maintaining and enhancing the quality and relevance of their educational programs. This case study reports on the design and effects of a professional development arrangement (PDA), with such a…

  8. Data quality objectives for the initial fuel conditioning examinations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lawrence, L.A.

    The Data Quality Objectives (DQOs) were established for the response of the first group of fuel samples shipped from the K West Basin to the Hanford 327 Building hot cells for examinations to the proposed Path Forward conditioning process. Controlled temperature and atmosphere furnace testing testing will establish performance parameters using the conditioning process (drying, sludge drying, hydride decomposition passivation) proposed by the Independent Technical Assessment (ITA) Team as the baseline.

  9. Tools for Schools: Filtration for Improved Air Quality. Technical Services Bulletin.

    ERIC Educational Resources Information Center

    2001

    This product bulletin addresses air pollution control in educational facilities to enhance educational performance, provides air quality recommendations for schools, and examines the filtration needs of various school areas. The types of air particles typically present are highlighted, and the use of proper filtration to control gases and vapors…

  10. Accountable Talk in Reading Comprehension Instruction. CSE Technical Report 670

    ERIC Educational Resources Information Center

    Wolf, Mikyung Kim; Crosson, Amy C.; Resnick, Lauren B.

    2006-01-01

    This study examined the relationship between the quality of classroom talk and academic rigor in reading comprehension lessons. In addition, the study aimed to characterize effective questions to support rigorous reading comprehension lessons. The data were collected as a part of the Instructional Quality Assessment (IQA) pilot. The IQA is a…

  11. Implementation of quality improvement techniques for management and technical processes in the ACRV project

    NASA Technical Reports Server (NTRS)

    Raiman, Laura B.

    1992-01-01

    Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

  12. Implementation of quality improvement techniques for management and technical processes in the ACRV project

    NASA Astrophysics Data System (ADS)

    Raiman, Laura B.

    1992-12-01

    Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

  13. Implementation of a clinical quality control program in a mammography screening service of Brazil.

    PubMed

    DE Souza Sabino, Silvia Maria Prioli; Silva, Thiago Buosi; Watanabe, Anapaula Hidemi Uema; Syrjänen, Kari; Carvalho, André Lopes; Mauad, Edmundo Carvalho

    2014-09-01

    To evaluate the effect of a clinical quality control program on the final quality of a mammography screening service. We conducted retrospective assessment of the clinical quality of 5,000 mammograms taken in a Mammography Screening Program between November 2010 and September 2011, following the implementation of a Clinical Quality Control Program based on the European Guidelines. Among the 105,000 evaluated quality items, there were 8,588 failures (8.2%) - 1.7 failures per examination. Altogether, 89% of the failures were associated with positioning. The recall rate due to a technical error reached a maximum of 0.5% in the early phase of the observation period and subsequently stabilized (0.09%). The ongoing education and monitoring combined with personalized training increased the critical thinking of the involved professionals, reducing the technical failures and unnecessary exposure of patients to radiation, with substantial improvement in the final quality of mammography. Copyright© 2014 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  14. Feasibility Study on Fully Automatic High Quality Translation: Volume I. Final Technical Report.

    ERIC Educational Resources Information Center

    Lehmann, Winifred P.; Stachowitz, Rolf

    The object of this theoretical inquiry is to examine the controversial issue of a fully automatic high quality translation (FAHQT) in the light of past and projected advances in linguistic theory and hardware/software capability. This first volume of a two-volume report discusses the requirements of translation and aspects of human and machine…

  15. Technical Limitations of Electronic Health Records in Community Health Centers: Implications on Ambulatory Care Quality

    ERIC Educational Resources Information Center

    West, Christopher E.

    2010-01-01

    Research objectives: This dissertation examines the state of development of each of the eight core electronic health record (EHR) functionalities as described by the IOM and describes how the current state of these functionalities limit quality improvement efforts in ambulatory care settings. There is a great deal of literature describing both the…

  16. 25 CFR 216.4 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... mining sites and mining operations vary widely with respect to topography, climate, surrounding land uses... quality below standards established by the appropriate State water pollution control agency, or by the...

  17. 25 CFR 216.4 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... mining sites and mining operations vary widely with respect to topography, climate, surrounding land uses... quality below standards established by the appropriate State water pollution control agency, or by the...

  18. 25 CFR 216.4 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... mining sites and mining operations vary widely with respect to topography, climate, surrounding land uses... quality below standards established by the appropriate State water pollution control agency, or by the...

  19. 25 CFR 216.4 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... mining sites and mining operations vary widely with respect to topography, climate, surrounding land uses... quality below standards established by the appropriate State water pollution control agency, or by the...

  20. NDTAC Practice Guide: Quality Education Services Are Critical for Youth Involved with the Juvenile Justice and Child Welfare Systems

    ERIC Educational Resources Information Center

    Gonsoulin, Simon; Clark, Heather Griller; Rankin, Victoria E.

    2015-01-01

    This National Evaluation and Technical Assistance Center for the Education of Children and Youth Who are Neglected, Delinquent, or At-Risk (NDTAC) practice guide examines the principle that quality education services are critical for youth involved with the juvenile justice and child welfare systems. This principle asserts that, to address the…

  1. The Children of the Cost, Quality, and Outcomes Study Go to School. Technical Report.

    ERIC Educational Resources Information Center

    Peisner-Feinberg, Ellen. S.; Burchinal, Margaret R.; Clifford, Richard M.; Yazejian, Noreen; Culkin, Mary L.; Zelazo, Janice; Howes, Carollee; Byler, Patricia; Kagan, Sharon Lynn; Rustici, Jean

    Since a substantial majority of preschoolers participate in some form of child care before coming to school, the Cost, Quality, and Child Outcomes in Child Care Centers Study (CQO) was designed to examine the influence of typical center-based child care on children's development during their preschool years and as they move into formal elementary…

  2. Website design: technical, social and medical issues for self-reporting by elderly patients.

    PubMed

    Taylor, Mark J; Stables, Rod; Matata, Bashir; Lisboa, Paulo J G; Laws, Andy; Almond, Peter

    2014-06-01

    There is growing interest in the use of the Internet for interacting with patients, both in terms of healthcare information provision and information gathering. In this article, we examine the issues in designing healthcare websites for elderly users. In particular, this article uses a year-long case study of the development of a web-based system for self-reporting of symptoms and quality of life with a view to examine the issues relating to website design for elderly users. The issues identified included the technical, social and medical aspects of website design for elderly users. The web-based system developed was based on the European Quality of Life 5-Dimensions health-status questionnaire, a commonly used tool for patient self-reporting of quality of life, and the more specific coronary revascularisation outcome questionnaire. Currently, self-reporting is generally administered in the form of paper-based questionnaires to be completed in the outpatient clinic or at home. There are a variety of issues relating to elderly users, which imply that websites for elderly patients may involve different design considerations to other types of websites.

  3. Prevalence of apical periodontitis and quality of root canal treatment in an adult Palestinian sub-population

    PubMed Central

    Mukhaimer, Raed; Hussein, Emad; Orafi, Ibtesam

    2012-01-01

    Purpose The aim of this study was to determine the prevalence of apical periodontitis and the technical quality of root canal fillings in a Palestinian sub-population. Methods The panoramic radiographs of 258 patients (142 females, 116 males) attending dental clinics in 2010 were examined to identify the presence of apical lesions associated with any remaining teeth, excluding third molars. The technical quality of root canal fillings was also evaluated by assessing apical extension from the radiographic apex. The panoramic radiographs were taken by a well-trained radiology assistant and evaluated by a radiologist and an endodontist. Statistical analysis was performed with the chi-square test with a significant level set at P < 0.05%. Results Of 6482 teeth examined radiographically, 978 (15.1%) had radiographic signs of apical periodontitis (AP). The prevalence of AP was 8.3% in teeth without filled roots and 59.5% (509/855) in root canal-treated teeth. The prevalence of AP and endodontic treatment increased with age and differed significantly (p < 0.05) between males and females. The majority (74.5%) of root canal fillings was performed inadequately, and most (77.2%) inadequate fillings were >2 mm short of the radiographic apex. The presence of AP was correlated significantly with poorly executed root canal fillings (p < 0.05). Conclusions The present study found a high prevalence and incidence of AP in association with root-filled teeth. The technical quality of many root canal treatments was unacceptable. PMID:23960544

  4. Technical quality of delivery care in private- and public-sector health facilities in Enugu and Lagos States, Nigeria.

    PubMed

    Hirose, Atsumi; Yisa, Ibrahim O; Aminu, Amina; Afolabi, Nathanael; Olasunmbo, Makinde; Oluka, George; Muhammad, Khalilu; Hussein, Julia

    2018-06-01

    Private-sector providers are increasingly being recognized as important contributors to the delivery of healthcare. Countries with high disease burdens and limited public-sector resources are considering using the private sector to achieve universal health coverage. However, evidence for the technical quality of private-sector care is lacking. This study assesses the technical quality of maternal healthcare during delivery in public- and private-sector facilities in resource-limited settings, from a systems and programmatic perspective. A summary index (the skilled attendance index, SAI), was used. Two-staged cluster sampling with stratification was used to select representative samples of case records in public- and private-sector facilities in Enugu and Lagos States, Nigeria. Information to assess criteria was extracted, and the SAI calculated. Linear regression models examined the relationship between SAI and the private and public sectors, controlling for confounders. The median SAI was 54.8% in Enugu and 85.7% in Lagos. The private for-profit sector's SAI was lower than and the private not-for-profit sector's SAI was higher than the public sector in Enugu [coefficient = -3.6 (P = 0.018) and 12.6 (P < 0.001), respectively]. In Lagos, the private for-profit sector's SAI was higher and the private not-for-profit sector's SAI was lower than the public sector [3.71 (P = 0.005) and -3.92 (P < 0.001)]. Results indicate that the technical quality of private for-profit providers' care was poorer than public providers where the public provision of care was weak, while private for-profit facilities provided better technical quality care than public facilities where the public sector was strong and there was a relatively strong regulatory body. Our findings raise important considerations relating to the quality of maternity care, the public-private mix and needs for regulation in global efforts to achieve universal healthcare.

  5. Consumer evaluation of complaint handling in the Dutch health insurance market.

    PubMed

    Wendel, Sonja; de Jong, Judith D; Curfs, Emile C

    2011-11-15

    How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not influence consumer satisfaction evaluations and trust in the company to the same extent. Therefore, it is important for managers to be aware of the type of consumer satisfaction they are measuring when evaluating the handling of complaints within their company.

  6. Breast imaging. A practical look at its capabilities and its limitations.

    PubMed

    Clark, R; Nemec, L; Love, N

    1992-10-01

    The film-screen technique is evolving as the standard for mammography. Sonography is the only other method that currently has a defined role in breast imaging. Mammography should be performed at facilities that have received American College of Radiology accreditation or its equivalent, because technical quality assurance is an important part of mammographic practice. Interpretive quality may be assured by outcome audits performed by mammography facilities. Primary care physicians are best suited to encouraging eligible women to undergo screening studies and should consider these recommendations: Refer patients for screening mammography to accredited facilities according to established guidelines. Educate patients about the need for regular screening. Provide annual breast physical examination. Refresh your knowledge on breast health and the techniques of physical examination if necessary. Teach patients breast self-examination techniques. Demand low-cost, high-quality screening mammography; be aware of local variability of charges and quality.

  7. The quality of hospital-based antenatal care in Istanbul.

    PubMed

    Turan, Janet Molzan; Bulut, Ayşpen; Nalbant, Hacer; Ortayli, Nuriye; Akalin, A Arzu Koloğlu

    2006-03-01

    The aim of this study was to gather comprehensive data from three hospitals in Istanbul, Turkey, in order to gain in-depth understanding of the quality of antenatal care in this setting. The Bruce-Jain framework for quality of care was adapted for use in evaluating antenatal care. Methods included examination of hospital records, in-depth interviews, exit questionnaires, and structured observations. The study revealed deficiencies in the quality of antenatal care being delivered at the study hospitals in all six elements of the quality-of-care framework. The technical content of visits varied greatly among the hospitals, and an overuse of technology was accompanied by neglect of some essential components of antenatal care. Although at the private hospital some problems with the technical content of care were identified, client satisfaction was higher there, where the care included good interpersonal relations, information provision, and continuity. Providers at all three hospitals felt constrained by heavy patient loads and a lack of resources. Multifaceted approaches are needed to improve the quality of antenatal care in this setting.

  8. Digital radiography: optimization of image quality and dose using multi-frequency software.

    PubMed

    Precht, H; Gerke, O; Rosendahl, K; Tingberg, A; Waaler, D

    2012-09-01

    New developments in processing of digital radiographs (DR), including multi-frequency processing (MFP), allow optimization of image quality and radiation dose. This is particularly promising in children as they are believed to be more sensitive to ionizing radiation than adults. To examine whether the use of MFP software reduces the radiation dose without compromising quality at DR of the femur in 5-year-old-equivalent anthropomorphic and technical phantoms. A total of 110 images of an anthropomorphic phantom were imaged on a DR system (Canon DR with CXDI-50 C detector and MLT[S] software) and analyzed by three pediatric radiologists using Visual Grading Analysis. In addition, 3,500 images taken of a technical contrast-detail phantom (CDRAD 2.0) provide an objective image-quality assessment. Optimal image-quality was maintained at a dose reduction of 61% with MLT(S) optimized images. Even for images of diagnostic quality, MLT(S) provided a dose reduction of 88% as compared to the reference image. Software impact on image quality was found significant for dose (mAs), dynamic range dark region and frequency band. By optimizing image processing parameters, a significant dose reduction is possible without significant loss of image quality.

  9. [Investigation on pattern of quality control for Chinese materia medica based on famous-region drug and bioassay--the work reference].

    PubMed

    Yan, Dan; Xiao, Xiaohe

    2011-05-01

    Selection and standardization of the work reference are the technical issues to be faced with in the bioassay of Chinese materia medica. Taking the bioassay of Coptis chinensis. as an example, the manufacture process of the famous-region drugs extraction was explained from the aspects of original identification, routine examination, component analysis and bioassay. The common technologies were extracted, and the selection and standardization procedures of the work reference for the bioassay of Chinese materia medica were drawn up, so as to provide technical support for constructing a new mode and method of the quality control of Chinese materia medica based on the famous-region drugs and bioassay.

  10. How Reliable Are Informal Reading Inventories?

    ERIC Educational Resources Information Center

    Spector, Janet E.

    2005-01-01

    Informal Reading Inventories (IRI) are often recommended as instructionally relevant measures of reading. However, they have also been criticized for inattention to technical quality. Examination of reliability evidence in nine recently revised IRIs revealed that fewer than half report reliability. Several appear to have sufficient reliability for…

  11. Method for Examination and Documentation of Basic Information and Metadata from Published Reports Relevant to the Study of Stormwater Runoff Quality

    USGS Publications Warehouse

    Dionne, Shannon G.; Granato, Gregory E.; Tana, Cameron K.

    1999-01-01

    A readily accessible archive of information that is valid, current, and technically defensible is needed to make informed highway-planning, design, and management decisions. The National Highway Runoff Water-Quality Data and Methodology Synthesis (NDAMS) is a cataloging and assessment of the documentation of information relevant to highway-runoff water quality available in published reports. The report review process is based on the NDAMS review sheet, which was designed by the USGS with input from the FHWA, State transportation agencies, and the regulatory community. The report-review process is designed to determine the technical merit of the existing literature in terms of current requirements for data documentation, data quality, quality assurance and quality control (QA/QC), and technical issues that may affect the use of historical data. To facilitate the review process, the NDAMS review sheet is divided into 12 sections: (1) administrative review information, (2) investigation and report information, (3) temporal information, (4) location information (5) water-quality-monitoring information, (6) sample-handling methods, (7) constituent information, (8) sampling focus and matrix, (9) flow monitoring methods, (10) field QA/QC, (11) laboratory, and (12) uncertainty/error analysis. This report describes the NDAMS report reviews and metadata documentation methods and provides an overview of the approach and of the quality-assurance and quality-control program used to implement the review process. Detailed information, including a glossary of relevant terms, a copy of the report-review sheets, and reportreview instructions are completely documented in a series of three appendixes included with this report. Therefore the reviews are repeatable and the methods can be used by transportation research organizations to catalog new reports as they are published.

  12. Teleneurosonology: a novel application of transcranial and carotid ultrasound.

    PubMed

    Rubin, Mark N; Barrett, Kevin M; Freeman, W David; Lee Iannotti, Joyce K; Channer, Dwight D; Rabinstein, Alejandro A; Demaerschalk, Bart M

    2015-03-01

    To demonstrate the technical feasibility of interfacing transcranial Doppler (TCD) and carotid "duplex" ultrasonography (CUS) peripherals with telemedicine end points to provide real-time spectral waveform and duplex imaging data for remote review and interpretation. We performed remote TCD and CUS examinations on a healthy, volunteer employee from our institution without known cerebrovascular disease. The telemedicine end point was stationed in our institution's hospital where the neurosonology examinations took place and the control station was in a dedicated telemedicine room in a separate building. The examinations were performed by a postgraduate level neurohospitalist trainee (M.N.R.) and interpreted by an attending vascular neurologist, both with experience in the performance and interpretation of TCD and CUS. Spectral waveform and duplex ultrasound data were successfully transmitted from TCD and CUS instruments through a telemedicine end point to a remote reviewer at a control station. Image quality was preserved in all cases, and technical failures were not encountered. This proof-of-concept study demonstrates the technical feasibility of interfacing TCD and CUS peripherals with a telemedicine end point to provide real-time spectral waveform and duplex imaging data for remote review and interpretation. Medical diagnostic and telemedicine devices should be equipped with interfaces that allow simple transmission of high-quality audio and video information from the medical devices to the telemedicine technology. Further study is encouraged to determine the clinical impact of teleneurosonology. Copyright © 2015 National Stroke Association. Published by Elsevier Inc. All rights reserved.

  13. Pre-examination factors affecting molecular diagnostic test results and interpretation: A case-based approach.

    PubMed

    Payne, Deborah A; Baluchova, Katarina; Peoc'h, Katell H; van Schaik, Ron H N; Chan, K C Allen; Maekawa, Masato; Mamotte, Cyril; Russomando, Graciela; Rousseau, François; Ahmad-Nejad, Parviz

    2017-04-01

    Multiple organizations produce guidance documents that provide opportunities to harmonize quality practices for diagnostic testing. The International Organization for Standardization ISO 15189 standard addresses requirements for quality in management and technical aspects of the clinical laboratory. One technical aspect addresses the complexities of the pre-examination phase prior to diagnostic testing. The Committee for Molecular Diagnostics of the International Federation for Clinical Chemistry and Laboratory Medicine (also known as, IFCC C-MD) conducted a survey of international molecular laboratories and determined ISO 15189 to be the most referenced guidance document. In this review, the IFCC C-MD provides case-based examples illustrating the value of select pre-examination processes as these processes relate to molecular diagnostic testing. Case-based examples in infectious disease, oncology, inherited disease and pharmacogenomics address the utility of: 1) providing information to patients and users, 2) designing requisition forms, 3) obtaining informed consent and 4) maintaining sample integrity prior to testing. The pre-examination phase requires extensive and consistent communication between the laboratory, the healthcare provider and the end user. The clinical vignettes presented in this paper illustrate the value of applying select ISO 15189 recommendations for general laboratory to the more specialized area of Molecular Diagnostics. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Maintaining the program balance, volumes 1 and 2

    NASA Technical Reports Server (NTRS)

    Finger, Harold

    1991-01-01

    In March of 1990, the NASA Administrator asked the Academy to perform a study to address the following questions: (1) has NASA contracted too much of its technical work; (2) has NASA's in-house technical capability eroded over time; (3) is in-house engineering and scientific work important to the development of scientists and engineers; and (4) is NASA still able to attract quality scientists and engineers. A panel from the Academy addressed each question separately and came up with the following recommendations: (1) prepare and issue guidance on technical functional areas reserved for in-house performance; (2) convert contracted technical functions to in-house performance if critical to agency programs; (3) provide policy guidance to the centers to retain in-house projects; (4) examine the project mix at each center against agency goals and objectives; (5) institute an annual critical review for all technical disciplines; (6) modify the agency's contractor accountability process; and (7) seek opportunities for greater delegation of resources and technical decision making.

  15. Studying Quality beyond Technical Rationality: Political and Symbolic Perspectives

    ERIC Educational Resources Information Center

    Blanco Ramírez, Gerardo

    2013-01-01

    The underlying paradigms that influence research on quality have remained alarmingly under-researched; this article analyses the constraints that a technical-rational approach for the study of quality in higher education imposes. Technical rationality has been the dominant paradigm that shapes research on quality in higher education.…

  16. A History of Commitment in CALL.

    ERIC Educational Resources Information Center

    Jamieson, Joan

    The evolution of computer-assisted language learning (CALL) is examined, focusing on what has changed and what has not changed much during that time. A variety of changes are noted: the development of multimedia capabilities, color, animation, and technical improvement of audio and video quality; availability of databases, better fit between…

  17. 43 CFR 23.5 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... mining operations vary widely with respect to topography, climate, surrounding land uses, proximity to... lowering of water quality below standards established by the appropriate State water pollution control... to the State water pollution control agency and to the Department of the Interior that such lowering...

  18. 43 CFR 23.5 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... mining operations vary widely with respect to topography, climate, surrounding land uses, proximity to... lowering of water quality below standards established by the appropriate State water pollution control... to the State water pollution control agency and to the Department of the Interior that such lowering...

  19. 43 CFR 23.5 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... mining operations vary widely with respect to topography, climate, surrounding land uses, proximity to... lowering of water quality below standards established by the appropriate State water pollution control... to the State water pollution control agency and to the Department of the Interior that such lowering...

  20. 43 CFR 23.5 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... mining operations vary widely with respect to topography, climate, surrounding land uses, proximity to... lowering of water quality below standards established by the appropriate State water pollution control... to the State water pollution control agency and to the Department of the Interior that such lowering...

  1. Teacher Values and Relationship: Factors in Values Education

    ERIC Educational Resources Information Center

    Brady, Laurie

    2011-01-01

    Intrigued by the notion that effective teaching is as much about relationship as it is about "technical" proficiency, the author examines the values of teachers that inform classroom relationships, and poses the question as to whether there are particular teacher values that are necessary for quality values education. This question is…

  2. TECHNICAL FACT SHEET: A Systematic Evaluation of Dissolved Metals Loss during Water Sample Filtration

    EPA Science Inventory

    This research study examined how water quality collection and filtration approaches, including commonly used capsule and disc syringe filters, may cause losses in the amounts of soluble lead and copper found in a sample. A variety of commercially available filter materials with a...

  3. 25 CFR 216.4 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... ecological values; and control of erosion, flooding, and pollution of water; the isolation of toxic materials; the prevention of air pollution; the reclamation by revegetation, replacement of soil or by other... quality below standards established by the appropriate State water pollution control agency, or by the...

  4. 43 CFR 23.5 - Technical examination of prospective surface exploration and mining operations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ...; the control of erosion, flooding, and pollution of water; the isolation of toxic materials; the prevention of air pollution; the reclamation by revegetation, replacement of soil, or by other means, of... lowering of water quality below standards established by the appropriate State water pollution control...

  5. Workload and Stress in New Zealand Universities.

    ERIC Educational Resources Information Center

    Boyd, Sally; Wylie, Cathy

    This study examined the workloads of academic, general, support, library, and technical staff of New Zealand universities. It focused on current levels of workload, changes in workload levels and content, connections between workload and stress, and staff attitudes towards the effects of workload changes and educational reforms on the quality of…

  6. Technical errors in planar bone scanning.

    PubMed

    Naddaf, Sleiman Y; Collier, B David; Elgazzar, Abdelhamid H; Khalil, Magdy M

    2004-09-01

    Optimal technique for planar bone scanning improves image quality, which in turn improves diagnostic efficacy. Because planar bone scanning is one of the most frequently performed nuclear medicine examinations, maintaining high standards for this examination is a daily concern for most nuclear medicine departments. Although some problems such as patient motion are frequently encountered, the degraded images produced by many other deviations from optimal technique are rarely seen in clinical practice and therefore may be difficult to recognize. The objectives of this article are to list optimal techniques for 3-phase and whole-body bone scanning, to describe and illustrate a selection of deviations from these optimal techniques for planar bone scanning, and to explain how to minimize or avoid such technical errors.

  7. Consumer evaluation of complaint handling in the Dutch health insurance market

    PubMed Central

    2011-01-01

    Background How companies deal with complaints is a particularly challenging aspect in managing the quality of their service. In this study we test the direct and relative effects of service quality dimensions on consumer complaint satisfaction evaluations and trust in a company in the Dutch health insurance market. Methods A cross-sectional survey design was used. Survey data of 150 members of a Dutch insurance panel who lodged a complaint at their healthcare insurer within the past 12 months were surveyed. The data were collected using a questionnaire containing validated multi-item measures. These measures assess the service quality dimensions consisting of functional quality and technical quality and consumer complaint satisfaction evaluations consisting of complaint satisfaction and overall satisfaction with the company after complaint handling. Respondents' trust in a company after complaint handling was also measured. Using factor analysis, reliability and validity of the measures were assessed. Regression analysis was used to examine the relationships between these variables. Results Overall, results confirm the hypothesized direct and relative effects between the service quality dimensions and consumer complaint satisfaction evaluations and trust in the company. No support was found for the effect of technical quality on overall satisfaction with the company. This outcome might be driven by the context of our study; namely, consumers get in touch with a company to resolve a specific problem and therefore might focus more on complaint satisfaction and less on overall satisfaction with the company. Conclusions Overall, the model we present is valid in the context of the Dutch health insurance market. Management is able to increase consumers' complaint satisfaction, overall satisfaction with the company, and trust in the company by improving elements of functional and technical quality. Furthermore, we show that functional and technical quality do not influence consumer satisfaction evaluations and trust in the company to the same extent. Therefore, it is important for managers to be aware of the type of consumer satisfaction they are measuring when evaluating the handling of complaints within their company. PMID:22085762

  8. Quality Concerns in Technical Education in India: A Quantifiable Quality Enabled Model

    ERIC Educational Resources Information Center

    Gambhir, Victor; Wadhwa, N. C.; Grover, Sandeep

    2016-01-01

    Purpose: The paper aims to discuss current Technical Education scenarios in India. It proposes modelling the factors affecting quality in a technical institute and then applying a suitable technique for assessment, comparison and ranking. Design/methodology/approach: The paper chose graph theoretic approach for quantification of quality-enabled…

  9. The power of a collaborative relationship between technical assistance providers and community prevention teams: A correlational and longitudinal study

    PubMed Central

    Chilenski, Sarah M.; Perkins, Daniel F.; Olson, Jonathan; Hoffman, Lesa; Feinberg, Mark E.; Greenberg, Mark; Welsh, Janet; Crowley, D. Max; Spoth, Richard

    2015-01-01

    Background Historically, effectiveness of community collaborative prevention efforts has been mixed. Consequently, research has been undertaken to better understand the factors that support their effectiveness; theory and some related empirical research suggests that the provision of technical assistance is one important supporting factor. The current study examines one aspect of technical assistance that may be important in supporting coalition effectiveness, the collaborative relationship between the technical assistance provider and site lead implementer. Methods Four and one-half years of data were collected from technical assistance providers and prevention team members from the 14 community prevention teams involved in the PROSPER project. Results Spearman correlation analyses with longitudinal data show that the levels of the collaborative relationship during one phase of collaborative team functioning associated with characteristics of internal team functioning in future phases. Conclusions Results suggest that community collaborative prevention work should consider the collaborative nature of the technical assistance provider – prevention community team relationship when designing and conducting technical assistance activities, and it may be important to continually assess these dynamics to support high quality implementation. PMID:26476860

  10. Technical efficiency of nursing homes: do five-star quality ratings matter?

    PubMed

    Dulal, Rajendra

    2017-02-28

    This study investigates associations between five-star quality ratings and technical efficiency of nursing homes. The sample consists of a balanced panel of 338 nursing homes in California from 2009 through 2013 and uses two-stage data envelopment (DEA) analysis. The first-stage applies an input oriented variable returns to scale DEA analysis. The second-stage uses a left censored random-effect Tobit regression model. The five-star quality ratings i.e., health inspections, quality measures, staffing available on the Nursing Home Compare website are divided into two categories: outcome and structure form of quality. Results show that quality measures ratings and health inspection ratings, used as outcome form of quality, are not associated with mean technical efficiency. These quality ratings, however, do affect the technical efficiency of a particular nursing home and hence alter the ranking of nursing homes based on efficiency scores. Staffing rating, categorized as a structural form of quality, is negatively associated with mean technical efficiency. These findings show that quality dimensions are associated with technical efficiency in different ways, suggesting that multiple dimensions of quality should be included in the efficiency analysis of nursing homes. They also suggest that patient care can be enhanced through investing more in improving care delivery rather than simply raising the number of staff per resident.

  11. Does Satisfaction Reflect the Technical Quality of Mental Health Care?

    PubMed Central

    Edlund, Mark J; Young, Alexander S; Kung, Fuan Yue; Sherbourne, Cathy D; Wells, Kenneth B

    2003-01-01

    Objective To analyze the relationship between satisfaction and technical quality of care for common mental disorders. Data Source A nationally representative telephone survey of 9,585 individuals conducted in 1997–1998. Study Design Using multinomial logistic regression techniques we investigated the association between a five-level measure of satisfaction with the mental health care available for personal or emotional problems and two quality indicators. The first measure, appropriate technical quality, was defined as use of either appropriate counseling or psychotropic medications during the prior year for a probable depressive or anxiety disorder. The second, active treatment, indicated whether the respondent had received treatment for a psychiatric disorder in the past year. Covariates included measures of physical and mental health and sociodemographic indicators. Principal Findings Appropriate technical quality of care was significantly associated with higher levels of satisfaction. The strength of the association was moderate. Conclusions Satisfaction is associated with technical quality of care. However, profiling quality of care with satisfaction will likely require large samples and case-mix adjustment, which may be more difficult for plans or provider groups to implement than measuring technical indicators. More importantly, satisfaction is not the same as technical quality, and our results suggest that at this time they cannot be made to approach each other closely enough to eliminate either. PMID:12785565

  12. Influence of Psychological Factors on Product Development. Lessons from Aerospace and other Industries

    NASA Astrophysics Data System (ADS)

    Kamata, E. S.

    2002-10-01

    Product development is a major determinant of quality and cost as companies throughout the world struggle to optimize product development processes. Engineering tasks are usually implicitly assumed to be a primarily technical activity, but in reality they feature numerous nontechnical factors as well. This book focuses on the interrelationships of social, technical, and organizational aspects of the product development process. Cases observed in industry and research laboratories are presented and interpreted based on the socio-technical system approach (Emery / Trist) of examining the reciprocal relationship between the technical and the social subsystems. This book is primarily intended for engineering and quality professionals who want to know the limitations of current methods used in product development, to examine the so-called soft factors by means of grounded studies of their effect on R&D performance, not only to acknowledge the influence of soft factors but to actively consider their potential to improve the work environment. Academic researchers of the topic will also find many references and material for advanced courses on project and quality management. In addition to numerous cases from the aerospace industry, its general solution concepts are generalizable to other industries in which the high degree of product complexity necessitates effective interaction among different disciplines. The historical evaluation is neither intended for introductory purposes nor to propose a return to the past, but as a survey of the relevant factors to be applied in present and future projects. The author holds a degree in Electronics Engineering from the Instituto Tecnológico de Aeronautica, Brazil, as well as a PhD in Administration Sciences from the Swiss Federal Institute of Technology in Zurich, Switzerland. He draws on profound academic research as well as a wealth of practical experience in avionics, telecommunications, systems control, and the space industry. His professional biography includes activities in development, quality of development, reliability, testability and university lecturing. He also holds a commercial pilot license. Link: http://www.wkap.nl/prod/b/1-4020-0807-4

  13. Quality Career/Technical Programs Prepare Students to Succeed in a New, More Challenging Economy

    ERIC Educational Resources Information Center

    Southern Regional Education Board (SREB), 2008

    2008-01-01

    Quality career/technical education and its role in school improvement was a primary theme of the 2008 "High Schools That Work" ("HSTW") Staff Development Conference. This newsletter covers crucial topics in quality CTE (career and technical education), including assessing the quality and effectiveness of CT programs, preparing students to succeed…

  14. Technical and scale efficiency in public and private Irish nursing homes - a bootstrap DEA approach.

    PubMed

    Ni Luasa, Shiovan; Dineen, Declan; Zieba, Marta

    2016-10-27

    This article provides methodological and empirical insights into the estimation of technical efficiency in the nursing home sector. Focusing on long-stay care and using primary data, we examine technical and scale efficiency in 39 public and 73 private Irish nursing homes by applying an input-oriented data envelopment analysis (DEA). We employ robust bootstrap methods to validate our nonparametric DEA scores and to integrate the effects of potential determinants in estimating the efficiencies. Both the homogenous and two-stage double bootstrap procedures are used to obtain confidence intervals for the bias-corrected DEA scores. Importantly, the application of the double bootstrap approach affords true DEA technical efficiency scores after adjusting for the effects of ownership, size, case-mix, and other determinants such as location, and quality. Based on our DEA results for variable returns to scale technology, the average technical efficiency score is 62 %, and the mean scale efficiency is 88 %, with nearly all units operating on the increasing returns to scale part of the production frontier. Moreover, based on the double bootstrap results, Irish nursing homes are less technically efficient, and more scale efficient than the conventional DEA estimates suggest. Regarding the efficiency determinants, in terms of ownership, we find that private facilities are less efficient than the public units. Furthermore, the size of the nursing home has a positive effect, and this reinforces our finding that Irish homes produce at increasing returns to scale. Also, notably, we find that a tendency towards quality improvements can lead to poorer technical efficiency performance.

  15. Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fix, N. J.

    The scope of the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project) is to provide technical and integration support to Fluor Hanford, Inc., including operable unit investigations at 300-FF-5 and other groundwater operable units, strategic integration, technical integration and assessments, remediation decision support, and science and technology. This Quality Assurance Management Plan provides the quality assurance requirements and processes that will be followed by the Fluor Hanford, Inc. Groundwater and Technical Integration Support (Master Project).

  16. The Role of Communication and Cohesion in Reducing Social Loafing in Group Projects

    ERIC Educational Resources Information Center

    Lam, Chris

    2015-01-01

    This study examines previously untested variables that influence social loafing in professional and technical communication group projects by determining the influence of communication quality and task cohesion on social loafing. A set-up factors model, which included group size, peer review, project scope, and method of team formation, was also…

  17. Support of NASA quality requirements by defense contract administration services regions

    NASA Technical Reports Server (NTRS)

    Farrar, Hiram D.

    1966-01-01

    Defense Contract Administration Services Regions (DCASR) quality assurance personnel performing under NASA Letters of Delegation must work closely with the assigned technical representative of the NASA centers. It is realized that technical personnel from the NASA Centers cannot make on-site visits as frequently as they would like to. However, DCASR quality assurance personnel would know the assigned NASA technical representative and should contact him when problems arise. The technical representative is the expert on the hardware and should be consulted on any problem area. It is important that the DCASR quality assurance personnel recommend to the delegating NASA Center any new or improved methods of which they may be aware which would assist in achieving the desired quality and reliability in NASA hardware. NASA expects assignment of competent personnel in the Quality Assurance functional area and is not only buying the individual's technical skill, but also his experience. Suggestions by field personnel can many times up-grade the quality or the hardware.

  18. Does service integration improve technical quality of care in low-resource settings? An evaluation of a model integrating HIV care into family planning services in Kenya

    PubMed Central

    Mutemwa, Richard; Mayhew, Susannah H; Warren, Charlotte E; Abuya, Timothy; Ndwiga, Charity; Kivunaga, Jackline

    2017-01-01

    Abstract The aim of this study was to investigate association between HIV and family planning integration and technical quality of care. The study focused on technical quality of client–provider consultation sessions. The cross-sectional study observed 366 client–provider consultation sessions and interviewed 37 health care providers in 12 public health facilities in Kenya. Multilevel random intercept and linear regression models were fitted to the matched data to investigate relationships between service integration and technical quality of care as well as associations between facility-level structural and provider factors and technical quality of care. A sensitivity analysis was performed to test for hidden bias. After adjusting for facility-level structural factors, HIV/family planning integration was found to have significant positive effect on technical quality of the consultation session, with average treatment effect 0.44 (95% CI: 0.63–0.82). Three of the 12 structural factors were significantly positively associated with technical quality of consultation session including: availability of family planning commodities (9.64; 95% CI: 5.07–14.21), adequate infrastructure (5.29; 95% CI: 2.89–7.69) and reagents (1.48; 95% CI: 1.02–1.93). Three of the nine provider factors were significantly positively associated with technical quality of consultation session: appropriate provider clinical knowledge (3.14; 95% CI: 1.92–4.36), job satisfaction (2.02; 95% CI: 1.21–2.83) and supervision (1.01; 95% CI: 0.35–1.68), while workload (−0.88; 95% CI: −1.75 to − 0.01) was negatively associated. Technical quality of the client–provider consultation session was also determined by duration of the consultation and type of clinic visit and appeared to depend on whether the clinic visit occurred early or later in the week. Integration of HIV care into family planning services can improve the technical quality of client–provider consultation sessions as measured by both health facility structural and provider factors. PMID:29194543

  19. Does service integration improve technical quality of care in low-resource settings? An evaluation of a model integrating HIV care into family planning services in Kenya.

    PubMed

    Mutemwa, Richard; Mayhew, Susannah H; Warren, Charlotte E; Abuya, Timothy; Ndwiga, Charity; Kivunaga, Jackline

    2017-11-01

    The aim of this study was to investigate association between HIV and family planning integration and technical quality of care. The study focused on technical quality of client-provider consultation sessions. The cross-sectional study observed 366 client-provider consultation sessions and interviewed 37 health care providers in 12 public health facilities in Kenya. Multilevel random intercept and linear regression models were fitted to the matched data to investigate relationships between service integration and technical quality of care as well as associations between facility-level structural and provider factors and technical quality of care. A sensitivity analysis was performed to test for hidden bias. After adjusting for facility-level structural factors, HIV/family planning integration was found to have significant positive effect on technical quality of the consultation session, with average treatment effect 0.44 (95% CI: 0.63-0.82). Three of the 12 structural factors were significantly positively associated with technical quality of consultation session including: availability of family planning commodities (9.64; 95% CI: 5.07-14.21), adequate infrastructure (5.29; 95% CI: 2.89-7.69) and reagents (1.48; 95% CI: 1.02-1.93). Three of the nine provider factors were significantly positively associated with technical quality of consultation session: appropriate provider clinical knowledge (3.14; 95% CI: 1.92-4.36), job satisfaction (2.02; 95% CI: 1.21-2.83) and supervision (1.01; 95% CI: 0.35-1.68), while workload (-0.88; 95% CI: -1.75 to - 0.01) was negatively associated. Technical quality of the client-provider consultation session was also determined by duration of the consultation and type of clinic visit and appeared to depend on whether the clinic visit occurred early or later in the week. Integration of HIV care into family planning services can improve the technical quality of client-provider consultation sessions as measured by both health facility structural and provider factors. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

  20. Assessment of medical care by elderly people: general satisfaction and physician quality.

    PubMed Central

    Lee, Y; Kasper, J D

    1998-01-01

    OBJECTIVE: To identify personal characteristics and factors related to health and patterns of healthcare utilization associated with the elderly people's satisfaction with medical care. DATA SOURCES/STUDY SETTING: Data from the 1991 Medicare Current Beneficiary Survey (MCBS) on 8,859 persons age 65 and over living in the community. STUDY DESIGN: Items reflecting general satisfaction with care and views of physician quality are examined and, based on factor analysis, grouped in dimensions of two (global quality, access) and three (technical skills, interpersonal manner, information-giving), respectively. The relationship of high levels of satisfaction in each dimension to personal characteristics of elderly people, and to measures of access and utilization, is assessed using logistic regression. PRINCIPAL FINDINGS: While satisfaction is high, with over 90 percent surveyed expressing some satisfaction, there is substantial variation with less likelihood of high satisfaction among those 80 or older, with less education and income and in poorer health. Longer waiting time at visits and less frequent visits are factors in lower satisfaction as well. A favorable perception of physician quality, especially regarding technical skills, appears to play a significant role in satisfaction with global quality of care. CONCLUSIONS: Studies of patient satisfaction in elderly people are rare. Some factors expected to be related to positive assessment based on earlier studies, were, e.g., better health and shorter waiting time, while others were not, e.g., increasing age. Elderly people appear to place greater importance on physician technical skills, as opposed to interpersonal dimensions, in assessing global quality. These findings suggest the need for a better understanding of how elderly people evaluate care and what they value in interactions with the healthcare system. Images Figure 1 PMID:9460484

  1. Harnessing the Environmental Professional Expertise of Engineering Students--The Course: "Environmental Management Systems in the Industry"

    ERIC Educational Resources Information Center

    Ben-Zvi-Assaraf, Orit; Ayal, Nitzan

    2010-01-01

    More and more technical universities now advocate integrating sustainability in higher education and including it as a strategic goal for improving education's quality and relevance to society. This study examines 30 fourth-year chemical engineering students, graduates of a university course designed to combine their terminological domain with…

  2. Telemedicine in general neurology: use of audiovisual consultation for on call back-up service in an acute care hospital.

    PubMed

    Janssen, Frank; Awadallah, Mohammed; Alhalabi, Awed; Körber, Barbara; Lang, Reinhard; Scibor, Mateusz; Handschu, René

    2018-04-01

    While telemedicine is in expanding use in acute stroke care, little is known about its use in general neurology, especially in acute care. We sought to investigate the feasibility and possible effects of a telemedicine device within the neurological back-up service of an acute care hospital. In a 450 bed academic teaching hospital an experienced neurologist (EN) is on call to support the junior doctor at the hospital. Support was possible whether by standard telephone advice (TA) or by audiovisual consultations (AVC). In AVC the expert used a mobile telemedicine device and so he could establish audiovisual contact from his home to the emergency room and examine newly admitted patients. Technical and patient details including timing and diagnosis were recorded. Video and audio quality as well as impact of AVC on diagnosis was rated by the EN. Out of about 1200 cases in off peak times, during the study period, 164 AVC including remote video examination were done (13.6%). Also 48 cases were documented by pure TA. Video quality was rated to a medium of 1.7, audio quality to 2.1. In 36 cases the audiovisual consultation was influenced by technical issues leading to cessation of AVC in 8 cases. Duration of teleconsultation was 17.3 min in AVC compared to 8.7 min for TA. The consultation diagnosis in AVC was confirmed in 74.4% of all cases compared to 57.7% in TA. AVC was rated as a valuable contribution to the diagnostic workup in 74.3% of all cases seen. In about 40% of all cases AVC was not possible due to technical or organizational reasons. Audiovisual consultation seems to be a feasible and useful support in routine neurology back-up service of an acute care hospital. Better mobility of devices and flexibility of service is needed to improve availability and quality of this valuable tool.

  3. Assessing Technical Competence in Surgical Trainees: A Systematic Review.

    PubMed

    Szasz, Peter; Louridas, Marisa; Harris, Kenneth A; Aggarwal, Rajesh; Grantcharov, Teodor P

    2015-06-01

    To systematically examine the literature describing the methods by which technical competence is assessed in surgical trainees. The last decade has witnessed an evolution away from time-based surgical education. In response, governing bodies worldwide have implemented competency-based education paradigms. The definition of competence, however, remains elusive, and the impact of these education initiatives in terms of assessment methods remains unclear. A systematic review examining the methods by which technical competence is assessed was conducted by searching MEDLINE, EMBASE, PsychINFO, and the Cochrane database of systematic reviews. Abstracts of retrieved studies were reviewed and those meeting inclusion criteria were selected for full review. Data were retrieved in a systematic manner, the validity and reliability of the assessment methods was evaluated, and quality was assessed using the Grading of Recommendations Assessment, Development and Evaluation classification. Of the 6814 studies identified, 85 studies involving 2369 surgical residents were included in this review. The methods used to assess technical competence were categorized into 5 groups; Likert scales (37), benchmarks (31), binary outcomes (11), novel tools (4), and surrogate outcomes (2). Their validity and reliability were mostly previously established. The overall Grading of Recommendations Assessment, Development and Evaluation for randomized controlled trials was high and low for the observational studies. The definition of technical competence continues to be debated within the medical literature. The methods used to evaluate technical competence predominantly include instruments that were originally created to assess technical skill. Very few studies identify standard setting approaches that differentiate competent versus noncompetent performers; subsequently, this has been identified as an area with great research potential.

  4. Factors affecting team leadership skills and their relationship with quality of cardiopulmonary resuscitation.

    PubMed

    Yeung, Joyce H Y; Ong, G J; Davies, Robin P; Gao, Fang; Perkins, Gavin D

    2012-09-01

    This study aims to explore the relationship between team-leadership skills and quality of cardiopulmonary resuscitation in an adult cardiac-arrest simulation. Factors affecting team-leadership skills were also assessed. Forty advanced life-support providers leading a cardiac arrest team in a standardized cardiac-arrest simulation were videotaped. Background data were collected, including age (in yrs), sex, whether they had received any leadership training in the past, whether they were part of a professional group, the most recent advanced life-support course (in months) they had undergone, advanced life-support instructor/provider status, and whether they had led in any cardiac arrest situation in the preceding 6 months. Participants were scored using the Cardiac Arrest Simulation test score and Leadership Behavior Description Questionnaire for leadership skills. Process-focused quality of cardiopulmonary resuscitation data were collected directly from manikin and video recordings. Primary outcomes were complex technical skills (measured as Cardiac Arrest Simulation test score, preshock pause, and hands-off ratio). Secondary outcomes were simple technical skills (chest-compression rate, depth, and ventilation rate). Univariate linear regressions were performed to examine how leadership skills affect quality of cardiopulmonary resuscitation and bivariate correlations elicited factors affecting team-leadership skills.Teams led by leaders with the best leadership skills performed higher quality cardiopulmonary resuscitation with better technical performance (R = 0.75, p < .001), shorter preshock pauses (R = 0.18, p < .001), with lower total hands-off ratio (R = 0.24, p = .01), and shorter time to first shock (R = 0.14, p = .02). Leadership skills were not significantly associated with more simple technical skills such as chest-compression rate, depth, and ventilation rate. Prior training in team leader skills was independently associated with better leadership behavior. There is an association between team leadership skills and cardiac arrest simulation test score, preshock pause, and hands off ratio. Developing leadership skills should be considered an integral part of resuscitation training.

  5. Analysis for water conflicts in a changing world

    NASA Astrophysics Data System (ADS)

    Lund, J. R.

    2012-12-01

    Like any subject which involves billions of dollars and thousands or millions of people, managing water involves serious conflicts among contending objectives and interest groups. These conflicts usually spill into the technical and scientific analysis of water resources problems and potential solutions. A favorable or unfavorable analytical outcome can be worth millions or cost millions to a stakeholder, so they have a self-interested duty to contend. This talk examines ideas for conducting analysis to improve the technical and scientific quality of public and policy discussions of controversial water problems. More than just solid technical work is needed. Investigators must organize, disseminate, and communicate their work effectively and attentively. Research must often be designed to be effective in informing policy discussions. Several sometimes conflicting strategies are available for this.

  6. The power of a collaborative relationship between technical assistance providers and community prevention teams: A correlational and longitudinal study.

    PubMed

    Chilenski, Sarah M; Perkins, Daniel F; Olson, Jonathan; Hoffman, Lesa; Feinberg, Mark E; Greenberg, Mark; Welsh, Janet; Crowley, D Max; Spoth, Richard

    2016-02-01

    Historically, effectiveness of community collaborative prevention efforts has been mixed. Consequently, research has been undertaken to better understand the factors that support their effectiveness; theory and some related empirical research suggests that the provision of technical assistance is one important supporting factor. The current study examines one aspect of technical assistance that may be important in supporting coalition effectiveness, the collaborative relationship between the technical assistance provider and site lead implementer. Four and one-half years of data were collected from technical assistance providers and prevention team members from the 14 community prevention teams involved in the PROSPER project. Spearman correlation analyses with longitudinal data show that the levels of the collaborative relationship during one phase of collaborative team functioning associated with characteristics of internal team functioning in future phases. Results suggest that community collaborative prevention work should consider the collaborative nature of the technical assistance provider - prevention community team relationship when designing and conducting technical assistance activities, and it may be important to continually assess these dynamics to support high quality implementation. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures

    PubMed Central

    Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

    2016-01-01

    Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of performance suggest that efficiency may be achieved without sacrificing quality. PMID:26803655

  8. Does integration of HIV and sexual and reproductive health services improve technical efficiency in Kenya and Swaziland? An application of a two-stage semi parametric approach incorporating quality measures.

    PubMed

    Obure, Carol Dayo; Jacobs, Rowena; Guinness, Lorna; Mayhew, Susannah; Vassall, Anna

    2016-02-01

    Theoretically, integration of vertically organized services is seen as an important approach to improving the efficiency of health service delivery. However, there is a dearth of evidence on the effect of integration on the technical efficiency of health service delivery. Furthermore, where technical efficiency has been assessed, there have been few attempts to incorporate quality measures within efficiency measurement models particularly in sub-Saharan African settings. This paper investigates the technical efficiency and the determinants of technical efficiency of integrated HIV and sexual and reproductive health (SRH) services using data collected from 40 health facilities in Kenya and Swaziland for 2008/2009 and 2010/2011. Incorporating a measure of quality, we estimate the technical efficiency of health facilities and explore the effect of integration and other environmental factors on technical efficiency using a two-stage semi-parametric double bootstrap approach. The empirical results reveal a high degree of inefficiency in the health facilities studied. The mean bias corrected technical efficiency scores taking quality into consideration varied between 22% and 65% depending on the data envelopment analysis (DEA) model specification. The number of additional HIV services in the maternal and child health unit, public ownership and facility type, have a positive and significant effect on technical efficiency. However, number of additional HIV and STI services provided in the same clinical room, proportion of clinical staff to overall staff, proportion of HIV services provided, and rural location had a negative and significant effect on technical efficiency. The low estimates of technical efficiency and mixed effects of the measures of integration on efficiency challenge the notion that integration of HIV and SRH services may substantially improve the technical efficiency of health facilities. The analysis of quality and efficiency as separate dimensions of performance suggest that efficiency may be achieved without sacrificing quality. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  9. Human Factors and Ergonomics for the Dental Profession.

    PubMed

    Ross, Al

    2016-09-01

    This paper proposes that the science of Human Factors and Ergonomics (HFE) is suitable for wide application in dental education, training and practice to improve safety, quality and efficiency. Three areas of interest are highlighted. First it is proposed that individual and team Non-Technical Skills (NTS), such as communication, leadership and stress management can improve error rates and efficiency of procedures. Secondly, in a physically and technically challenging environment, staff can benefit from ergonomic principles which examine design in supporting safe work. Finally, examination of organizational human factors can help anticipate stressors and plan for flexible responses to multiple, variable demands, and fluctuating resources. Clinical relevance: HFE is an evidence-based approach to reducing error rates and procedural complications, and avoiding problems associated with stress and fatigue. Improved teamwork and organizational planning and efficiency can impact directly on patient outcomes.

  10. TECHNICAL GUIDANCE DOCUMENT: QUALITY ASSURANCE AND QUALITY CONTROL FOR WASTE CONTAINMENT FACILITIES

    EPA Science Inventory

    This Technical Guidance Document provides comprehensive guidance on procedures for quality assurance and quality control for waste containment facilities. he document includes a discussion of principles and concepts, compacted soil liners, soil drainage systems, geosynthetic drai...

  11. TECHNICAL GUIDANCE DOCUMENT: QUALITY ASSURANCE AND QUALITY CONTROL FOR WASTE CONTAINMENT FACILITIES

    EPA Science Inventory

    This Technical Guidance Document provides comprehensive guidance on procedures for quality assurance and quality control for waste containment facilities. The document includes a discussion of principles and concepts, compacted soil liners, soil drainage systems, geosynthetic dr...

  12. Total Quality Management (TQM) in Self-Financed Technical Institutions: A Quality Function Deployment (QFD) and Force Field Analysis Approach

    ERIC Educational Resources Information Center

    Thakkar, Jitesh; Deshmukh, S. G.; Shastree, Anil

    2006-01-01

    Purpose: To explore the potential for adoption of TQM in self-financed technical institutions in the light of new demands and challenges posed by customers/students and society. Design/methodology/approach: The paper presents use of quality function deployment (QFD) which prioritizes technical requirements and correlates them with various…

  13. How Should "Quality" Technical Education and Training Be Defined? A Statement from the National Council for Occupational Education.

    ERIC Educational Resources Information Center

    Everett, James; Gershwin, Mary; Hayes, Homer; Jacobs, James; Mundhenk, Robert

    Although objectively measurable achievement of outcomes is an important guide to the quality of education, the process of defining and assuring the quality of technical education and training must include consideration for the context in which technical education and training occurs. It is also critical to remember that education has two sets of…

  14. Movement evaluation of front crawl swimming: Technical skill versus aesthetic quality

    PubMed Central

    2017-01-01

    The study aim was to compare expert with non-expert swimmers’ rating of the aesthetic and technical qualities of front crawl in video-taped recordings of swimmers with low, middle, and high level proficiency. The results suggest that: i) observers’ experience affects their judgment: only the expert observers correctly rated the swimmers’ proficiency level; ii) evaluation of movement (technical and aesthetic scores) is correlated with the level of skill as expressed in the kinematics of the observed action (swimming speed, stroke frequency, and stroke length); iii) expert and non-expert observers use different strategies to rate the aesthetic and technical qualities of movement: equating the technical skill with the aesthetic quality is a general rule non-expert observers follow in the evaluation of human movement. PMID:28886063

  15. Optimizing structure of complex technical system by heterogeneous vector criterion in interval form

    NASA Astrophysics Data System (ADS)

    Lysenko, A. V.; Kochegarov, I. I.; Yurkov, N. K.; Grishko, A. K.

    2018-05-01

    The article examines the methods of development and multi-criteria choice of the preferred structural variant of the complex technical system at the early stages of its life cycle in the absence of sufficient knowledge of parameters and variables for optimizing this structure. The suggested methods takes into consideration the various fuzzy input data connected with the heterogeneous quality criteria of the designed system and the parameters set by their variation range. The suggested approach is based on the complex use of methods of interval analysis, fuzzy sets theory, and the decision-making theory. As a result, the method for normalizing heterogeneous quality criteria has been developed on the basis of establishing preference relations in the interval form. The method of building preferential relations in the interval form on the basis of the vector of heterogeneous quality criteria suggest the use of membership functions instead of the coefficients considering the criteria value. The former show the degree of proximity of the realization of the designed system to the efficient or Pareto optimal variants. The study analyzes the example of choosing the optimal variant for the complex system using heterogeneous quality criteria.

  16. Military Training. Its Effectiveness for Technical Specialties Is Unknown. Report to the Secretary of Defense.

    ERIC Educational Resources Information Center

    General Accounting Office, Washington, DC. Program Evaluation and Methodology Div.

    A study examined the information collected by the Department of Defense on both the quality of its new recruits and the effectiveness of its training in preparing recruits to operate in a technologically sophisticated environment. It found that data were collected at a recruit's entrance to military life, during and upon completion of formal…

  17. Innovations and Future Directions for Early Numeracy Curriculum-Based Measurement: Commentary on the Special Series, Part 2

    ERIC Educational Resources Information Center

    Methe, Scott A.

    2012-01-01

    The purpose of this extended commentary article is to frame the set of studies in the first of two issues and recommend areas of inquiry for future research. This special series issue features studies examining the technical qualities of formative assessment procedures that were developed to inform intervention. This article intends to emphasize…

  18. Quality Work, Quality Control in Technical Services.

    ERIC Educational Resources Information Center

    Horny, Karen L.

    1985-01-01

    Quality in library technical services is explored in light of changes produced by automation. Highlights include a definition of quality; new opportunities and shifting priorities; cataloging (fullness of records, heading consistency, accountability, local standards, automated checking); need for new skills (management, staff); and boons of…

  19. Quality and comparison of antenatal care in public and private providers in the United Republic of Tanzania.

    PubMed Central

    Boller, Christoph; Wyss, Kaspar; Mtasiwa, Deo; Tanner, Marcel

    2003-01-01

    OBJECTIVE: To compare the quality of public and private first-tier antenatal care services in Dar es Salaam, United Republic of Tanzania, using defined criteria. METHODS: Structural attributes of quality were assessed through a checklist, and process attributes, including interpersonal and technical aspects, through observation and exit interviews. A total of 16 health care providers, and 166 women in the public and 188 in the private sector, were selected by systematic random sampling for inclusion in the study. Quality was measured against national standards, and an overall score calculated for the different aspects to permit comparison. FINDINGS: The results showed that both public and private providers were reasonably good with regard to the structural and interpersonal aspects of quality of care. However, both were poor when it came to technical aspects of quality. For example, guidelines for dispensing prophylactic drugs against anaemia or malaria were not respected, and diagnostic examinations for the assessment of gestation, anaemia, malaria or urine infection were frequently not performed. In all aspects, private providers were significantly better than public ones. CONCLUSION: Approaches to improving quality of care should emerge progressively as a result of regular quality assessments. Changes should be introduced using an incremental approach addressing few improvements at a time, while ensuring participation in, and ownership of, every aspect of the strategy by health personnel, health planners and managers and also the community. PMID:12751419

  20. Benchmarking the performance of fixed-image receptor digital radiographic systems part 1: a novel method for image quality analysis.

    PubMed

    Lee, Kam L; Ireland, Timothy A; Bernardo, Michael

    2016-06-01

    This is the first part of a two-part study in benchmarking the performance of fixed digital radiographic general X-ray systems. This paper concentrates on reporting findings related to quantitative analysis techniques used to establish comparative image quality metrics. A systematic technical comparison of the evaluated systems is presented in part two of this study. A novel quantitative image quality analysis method is presented with technical considerations addressed for peer review. The novel method was applied to seven general radiographic systems with four different makes of radiographic image receptor (12 image receptors in total). For the System Modulation Transfer Function (sMTF), the use of grid was found to reduce veiling glare and decrease roll-off. The major contributor in sMTF degradation was found to be focal spot blurring. For the System Normalised Noise Power Spectrum (sNNPS), it was found that all systems examined had similar sNNPS responses. A mathematical model is presented to explain how the use of stationary grid may cause a difference between horizontal and vertical sNNPS responses.

  1. Parents on the web: risks for quality management of cough in children.

    PubMed

    Pandolfini, C; Impicciatore, P; Bonati, M

    2000-01-01

    Health information on the Internet, with respect to common, self-limited childhood illnesses, has been found to be unreliable. Therefore, parents navigating on the Internet risk finding advice that is incomplete or, more importantly, not evidence-based. The importance that a resource such as the Internet as a source of quality health information for consumers should, however, be taken into consideration. For this reason, studies need to be performed regarding the quality of material provided. Various strategies have been proposed that would allow parents to distinguish trustworthy web documents from unreliable ones. One of these strategies is the use of a checklist for the appraisal of web pages based on their technical aspects. The purpose of this study was to assess the quality of information present on the Internet regarding the home management of cough in children and to examine the applicability of a checklist strategy that would allow consumers to select more trustworthy web pages. The Internet was searched for web pages regarding the home treatment of cough in children with the use of different search engines. Medline and the Cochrane database were searched for available evidence concerning the management of cough in children. Three checklists were created to assess different aspects of the web documents. The first checklist was designed to allow for a technical appraisal of the web pages and was based on components such as the name of the author and references used. The second was constructed to examine the completeness of the health information contained in the documents, such as causes and mechanism of cough, and pharmacological and nonpharmacological treatment. The third checklist assessed the quality of the information by measuring it against a gold standard document. This document was created by combining the policy statement issued by the American Academy of Pediatrics regarding the pharmacological treatment of cough in children with the guide of the World Health Organization on drugs for children. For each checklist, the web page contents were analyzed and quantitative measurements were assigned. Of the 19 web pages identified, 9 explained the purpose and/or mechanism of cough and 14 the causes. The most frequently mentioned pharmacological treatments were single-ingredient suppressant preparations, followed by single-ingredient expectorants. Dextromethorphan was the most commonly referred to suppressant and guaifenesin the most common expectorant. No documents discouraged the use of suppressants, although 4 of the 10 web documents that addressed expectorants discouraged their use. Sixteen web pages addressed nonpharmacological treatment, 14 of which suggested exposure to a humid environment and/or extra fluid. In most cases, the criteria in the technical appraisal checklist were not present in the web documents; moreover, 2 web pages did not provide any of the items. Regarding content completeness, 3 web pages satisfied all the requirements considered in the checklist and 2 documents did not meet any of the criteria. Of the 3 web pages that scored highest in technical aspect, 2 also supplied complete information. No relationship was found, however, between the technical aspect and the content completeness. Concerning the quality of the health information supplied, 10 pages received a negative score because they contained more incorrect than correct information, and 1 web page received a high score. This document was 1 of the 2 that also scored high in technical aspect and content completeness. No relationship was found, however, among quality of information, technical aspect, and content completeness. As the results of this study show, a parent navigating the Internet for information on the home management of cough in children will no doubt find incorrect advice among the search results. (ABSTRACT TRUNCATED)

  2. African American women in the workplace: relationships between job conditions, racial bias at work, and perceived job quality.

    PubMed

    Hughes, D; Dodge, M A

    1997-10-01

    Although studies have described work processes among employed African American women, few have examined the influence of these processes on job outcomes. This study examined relationships between African American women's exposure to a range of occupational stressors, including two types of racial bias--institutional discrimination and interpersonal prejudice--and their evaluations of job quality. Findings indicated that institutional discrimination and interpersonal prejudice were more important predictors of job quality among these women than were other occupational stressors such as low task variety and decision authority, heavy workloads, and poor supervision. Racial bias in the workplace was most likely to be reported by workers in predominantly white work settings. In addition, Black women who worked in service, semiskilled, and unskilled occupations reported significantly more institutional discrimination, but not more interpersonal prejudice, than did women in professional, managerial, and technical occupations or those in sales and clerical occupations.

  3. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 5: Aerospace librarians and technical information specialists as information intermediaries: A report of phase 2 activities of the NASA/DOD Aerospace Knowledge Diffusion Research Project

    NASA Technical Reports Server (NTRS)

    Pinelli, Thomas E.; Kennedy, John M.

    1990-01-01

    The flow of U.S. government-funded and foreign scientific and technical information (STI) through libraries and related facilities to users in government and industry is examined, summarizing preliminary results of Phase 2 of the NASA/DOD Aerospace Knowledge Diffusion Research Project (NAKDRP). The design and objectives of NAKDRP are reviewed; the NAKDRP model of STI transfer among producers, STI intermediaries, surrogates (technical report repositories or clearinghouses), and users is explained and illustrated with diagrams; and particular attention is given to the organization and operation of aerospace libraries. In a survey of North American libraries it was found that 25-30 percent of libraries regularly receive technical reports from ESA and the UK; the corresponding figures for Germany and for France, Sweden, and Japan are 18 and 5 percent, respectively. Also included is a series of bar graphs showing the librarians' assessments of the quality and use of NASA Technical Reports.

  4. F-18 Choline PET angiography of the pelvic arteries: evaluation of image quality and comparison with contrast-enhanced CT.

    PubMed

    Freesmeyer, Martin; Drescher, Robert

    2015-01-01

    The purpose was to show the feasibility of F-18 choline positron emission tomography (PET) angiography for the evaluation of abdominal and iliac arteries. Thirty-five patients were examined and image quality was scored. Findings were correlated with contrast-enhanced computed tomography. Image quality was best in the aorta and common iliac arteries (100% and 93% of vessels). Negative predictive values of PET angiography were excellent (100%), and positive predictive values were impaired by disease overestimation. PET angiography is technically feasible and of good image quality in large arteries. In selected cases, it may become an alternative to established angiographic methods. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. Ownership, competition, and the adoption of new technologies and cost-saving practices in a fixed-price environment.

    PubMed

    Hirth, R A; Chernew, M E; Orzol, S M

    2000-01-01

    Advances in medical technology have been implicated as the primary cause of rising health care expenditures. It is not yet known whether the increasing prevalence of managed care mechanisms, particularly capitation, will change substantially incentives for acquiring and using cost-increasing innovations. We examined the decisions of dialysis units (a set of providers that has faced capitation and real decreases in payment for several decades) with respect to use of cost-increasing technologies that enhance quality of care, cost-cutting practices that reduce quality of care, and amenities desired by patients that are unrelated to quality of care. We found that the dialysis payment system does not appear to have blocked access to a number of new, quality-enhancing technologies that were developed in the 1980s. However, facilities made adjustments along other valuable margins to facilitate adoption of these technologies; use of new technologies varied with numerous facility, regulatory, and case-mix characteristics including ownership, chain membership, size, market competition, and certificate of need programs. Interestingly, the trade-offs made by for-profit and nonprofit facilities when faced with fixed prices appeared quite different. For-profits tended to deliver lower technical quality of care but more amenities, while nonprofits favored technical quality of care over amenities. Our findings may have implications for the response of other types of health care providers to capitation and increasing economic constraints.

  6. Solar energy/utility interface - The technical issues

    NASA Astrophysics Data System (ADS)

    Tabors, R. D.; White, D. C.

    1982-01-01

    The technical and economic factors affecting an interface between solar/wind power sources and utilities are examined. Photovoltaic, solar thermal, and wind powered systems are subject to stochastic local climatic variations and as such may require full back-up services from utilities, which are then in a position of having reserve generating power and power lines and equipment which are used only part time. The low reliability which has degraded some economies of scale formerly associated with large, centralized power plants, and the lowered rate of the increase in electricity usage is taken to commend the inclusion of power sources with a modular nature such as is available from solar derived electrical generation. Technical issues for maintaining the quality of grid power and also effectively metering purchased and supplied back-up power as part of a homeostatic system of energy control are discussed. It is concluded that economic considerations, rather than technical issues, bear the most difficulty in integrating solar technologies into the utility network.

  7. Physical activity and individuals with spinal cord injury: accuracy and quality of information on the Internet.

    PubMed

    Jetha, Arif; Faulkner, Guy; Gorczynski, Paul; Arbour-Nicitopoulos, Kelly; Martin Ginis, Kathleen A

    2011-04-01

    A number of websites on the Internet promote health-enhancing behaviors among people with spinal cord injury (SCI). However, the information available is of unknown accuracy and quality. To examine the accuracy, quality, and targeting strategies used in online physical activity (PA) information aimed at people with SCI. A purposive sample of 30 frequently accessed websites for individuals with SCI that included PA information was examined. Websites were evaluated based on their descriptive characteristics, level of accuracy in relation to newly defined PA recommendations for people with SCI, technical and theoretical quality (i.e., use of behavioral theories) characteristics, and targeting strategies to promote PA among people with SCI. Descriptive statistics were utilized to illustrate the results of the evaluation. PA information was easily accessible, as rated by the number of clicks required to access information. Only 6 websites (20%) provided specific PA recommendations and these websites exhibited low accuracy. Technically, websites were of high quality with a mean score of 4.1 of a possible 6 points. In contrast, websites had a low level of theoretical quality, with 23 of the 30 websites (77%) scoring below 9 of a possible 14 points (i.e., 64% of a perfect score) for theoretical content. A majority of websites evaluated did not use cognitive (e.g., self-efficacy, self-talk, and perceived social norms) and behavioral (e.g., self-monitoring, motivational readiness, and realistic goal-setting) strategies in their messages. A majority (80%) of the evaluated websites customized information for persons with different injury levels and completeness. Less than half of the websites evaluated tailored PA information toward people at different stages of their injury rehabilitation (37%) or for their caregivers (30%). Accuracy and theoretical quality of PA information presented to people with SCI on the Internet may not be optimal. Websites should be improved to incorporate accepted PA recommendations and behavioral theory to better deliver health messages about PA. Copyright © 2011 Elsevier Inc. All rights reserved.

  8. The most common nonconformities encountered during the assessments of medical laboratories in Hong Kong using ISO 15189 as accreditation criteria

    PubMed Central

    Ho, Bella; Ho, Eric

    2012-01-01

    Introduction: ISO 15189 was a new standard published in 2003 for accrediting medical laboratories. We believe that some requirements of the ISO 15189 standard are especially difficult to meet for majority of laboratories. The aim of this article was to present the frequency of nonconformities to requirements of the ISO 15189 accreditation standard, encountered during the assessments of medical laboratories in Hong Kong, during 2004 to 2009. Materials and methods: Nonconformities reported in assessments based on ISO 15189 were analyzed in two periods – from 2004 to 2006 and in 2009. They are categorized according to the ISO 15189 clause numbers. The performance of 27 laboratories initially assessed between 2004 and 2006 was compared to their performance in the second reassessment in 2009. Results: For management requirements, nonconformities were most frequently reported against quality management system, quality and technical records and document control; whereas for technical requirements, they were reported against examination procedures, equipment, and assuring quality of examination procedures. There was no major difference in types of common nonconformities reported in the two study periods. The total number of nonconformities reported in the second reassessment of 27 laboratories in 2009 was almost halved compared to their initial assessments. The number of significant nonconformities per laboratory significantly decreased (P = 0.023). Conclusion: Similar nonconformities were reported in the two study periods though the frequency encountered decreased. The significant decrease in number of significant nonconformities encountered in the same group of laboratories in the two periods substantiated that ISO15189 contributed to quality improvement of accredited laboratories. PMID:22838190

  9. The most common nonconformities encountered during the assessments of medical laboratories in Hong Kong using ISO 15189 as accreditation criteria.

    PubMed

    Ho, Bella; Ho, Eric

    2012-01-01

    ISO 15189 was a new standard published in 2003 for accrediting medical laboratories. We believe that some requirements of the ISO 15189 standard are especially difficult to meet for majority of laboratories. The aim of this article was to present the frequency of nonconformities to requirements of the ISO 15189 accreditation standard, encountered during the assessments of medical laboratories in Hong Kong, during 2004 to 2009. Nonconformities reported in assessments based on ISO 15189 were analyzed in two periods - from 2004 to 2006 and in 2009. They are categorized according to the ISO 15189 clause numbers. The performance of 27 laboratories initially assessed between 2004 and 2006 was compared to their performance in the second reassessment in 2009. For management requirements, nonconformities were most frequently reported against quality management system, quality and technical records and document control; whereas for technical requirements, they were reported against examination procedures, equipment, and assuring quality of examination procedures. There was no major difference in types of common nonconformities reported in the two study periods. The total number of nonconformities reported in the second reassessment of 27 laboratories in 2009 was almost halved compared to their initial assessments. The number of significant nonconformities per laboratory significantly decreased (P = 0.023). Similar nonconformities were reported in the two study periods though the frequency encountered decreased. The significant decrease in number of significant nonconformities encountered in the same group of laboratories in the two periods substantiated that 15015189 contributed to quality improvement of accredited laboratories.

  10. Technical Quality of Complete Dentures: Influence on Masticatory Efficiency and Quality of Life.

    PubMed

    Tôrres, Ana Clara Soares Paiva; Maciel, Amanda de Queiroz; de Farias, Danielle Bezerra; de Medeiros, Annie Karoline Bezerra; Vieira, Flávia Patrícia Tavares Veras; Carreiro, Adriana da Fonte Porto

    2017-11-09

    To evaluate the effect of the technical quality of conventional complete dentures (CD) on masticatory efficiency and quality of life (QoL) of denture wearers during a 1-year follow-up. A prospective clinical trial with 32 edentulous patients (mean age of 60.2 years) wearing mandibular and maxillary dentures was conducted. All patients were evaluated wearing their preexisting dentures and after 3, 6, and 12 months postinsertion of new dentures. A reproducible method for objective evaluation of the technical quality of CDs was employed. Masticatory efficiency was evaluated by the colorimetric method using beads as artificial testing food. The oral health impact on patient QoL was measured using the OHIP-EDENT (Oral Health Impact Profile in Edentulous Adults) questionnaire. The nonparametric Wilcoxon test was applied to reveal any differences in technical quality between the preexisting and new dentures. The Friedman test was used to detect differences in masticatory efficiency and oral health impact on QoL. Spearman's correlation was applied to reveal correlation between the variables. Comparing preexisting and new dentures, significant improvement was found in technical quality between the dentures (p < 0.001). There was no statistically significant difference in masticatory efficiency. A significant decrease was found in the total OHIP-EDENT scores after denture replacement. A positive correlation was found between technical quality and OHIP in the new denture wearers (p = 0.011). According to the results of this study, denture quality significantly improved patients' oral health-related QoL; however, insertion of new dentures did not influence masticatory efficiency. © 2017 by the American College of Prosthodontists.

  11. Quality Assurance of Teachers in the Implementation of the Curriculum of Technical and Vocational Education in Colleges of Education (Technical) in North Cental Nigeria

    ERIC Educational Resources Information Center

    Attaochu, Egbita Ugbalu

    2013-01-01

    This study was carried out to ascertain the quality assurance of teachers (lecturers) in the implementation of the curriculum of Technical and Vocational Education (TVE) in Colleges of Education (Technical) in North Central Nigeria. Two research questions were formulated and answered in this study. Survey research and evaluation designs were…

  12. Biological Water Quality Criteria

    EPA Pesticide Factsheets

    Page contains links to Technical Documents pertaining to Biological Water Quality Criteria, including, technical assistance documents for states, tribes and territories, program overviews, and case studies.

  13. Air Quality Modeling Technical Support Document for the Final Cross State Air Pollution Rule Update

    EPA Pesticide Factsheets

    In this technical support document (TSD) we describe the air quality modeling performed to support the final Cross State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS).

  14. Towards a five-minute comprehensive cardiac MR examination using highly accelerated parallel imaging with a 32-element coil array: feasibility and initial comparative evaluation.

    PubMed

    Xu, Jian; Kim, Daniel; Otazo, Ricardo; Srichai, Monvadi B; Lim, Ruth P; Axel, Leon; Mcgorty, Kelly Anne; Niendorf, Thoralf; Sodickson, Daniel K

    2013-07-01

    To evaluate the feasibility and perform initial comparative evaluations of a 5-minute comprehensive whole-heart magnetic resonance imaging (MRI) protocol with four image acquisition types: perfusion (PERF), function (CINE), coronary artery imaging (CAI), and late gadolinium enhancement (LGE). This study protocol was Health Insurance Portability and Accountability Act (HIPAA)-compliant and Institutional Review Board-approved. A 5-minute comprehensive whole-heart MRI examination protocol (Accelerated) using 6-8-fold-accelerated volumetric parallel imaging was incorporated into and compared with a standard 2D clinical routine protocol (Standard). Following informed consent, 20 patients were imaged with both protocols. Datasets were reviewed for image quality using a 5-point Likert scale (0 = non-diagnostic, 4 = excellent) in blinded fashion by two readers. Good image quality with full whole-heart coverage was achieved using the accelerated protocol, particularly for CAI, although significant degradations in quality, as compared with traditional lengthy examinations, were observed for the other image types. Mean total scan time was significantly lower for the Accelerated as compared to Standard protocols (28.99 ± 4.59 min vs. 1.82 ± 0.05 min, P < 0.05). Overall image quality for the Standard vs. Accelerated protocol was 3.67 ± 0.29 vs. 1.5 ± 0.51 (P < 0.005) for PERF, 3.48 ± 0.64 vs. 2.6 ± 0.68 (P < 0.005) for CINE, 2.35 ± 1.01 vs. 2.48 ± 0.68 (P = 0.75) for CAI, and 3.67 ± 0.42 vs. 2.67 ± 0.84 (P < 0.005) for LGE. Diagnostic image quality for Standard vs. Accelerated protocols was 20/20 (100%) vs. 10/20 (50%) for PERF, 20/20 (100%) vs. 18/20 (90%) for CINE, 18/20 (90%) vs. 18/20 (90%) for CAI, and 20/20 (100%) vs. 18/20 (90%) for LGE. This study demonstrates the technical feasibility and promising image quality of 5-minute comprehensive whole-heart cardiac examinations, with simplified scan prescription and high spatial and temporal resolution enabled by highly parallel imaging technology. The study also highlights technical hurdles that remain to be addressed. Although image quality remained diagnostic for most scan types, the reduced image quality of PERF, CINE, and LGE scans in the Accelerated protocol remain a concern. Copyright © 2012 Wiley Periodicals, Inc.

  15. Virtual reality-based simulators for spine surgery: a systematic review.

    PubMed

    Pfandler, Michael; Lazarovici, Marc; Stefan, Philipp; Wucherer, Patrick; Weigl, Matthias

    2017-09-01

    Virtual reality (VR)-based simulators offer numerous benefits and are very useful in assessing and training surgical skills. Virtual reality-based simulators are standard in some surgical subspecialties, but their actual use in spinal surgery remains unclear. Currently, only technical reviews of VR-based simulators are available for spinal surgery. Thus, we performed a systematic review that examined the existing research on VR-based simulators in spinal procedures. We also assessed the quality of current studies evaluating VR-based training in spinal surgery. Moreover, we wanted to provide a guide for future studies evaluating VR-based simulators in this field. This is a systematic review of the current scientific literature regarding VR-based simulation in spinal surgery. Five data sources were systematically searched to identify relevant peer-reviewed articles regarding virtual, mixed, or augmented reality-based simulators in spinal surgery. A qualitative data synthesis was performed with particular attention to evaluation approaches and outcomes. Additionally, all included studies were appraised for their quality using the Medical Education Research Study Quality Instrument (MERSQI) tool. The initial review identified 476 abstracts and 63 full texts were then assessed by two reviewers. Finally, 19 studies that examined simulators for the following procedures were selected: pedicle screw placement, vertebroplasty, posterior cervical laminectomy and foraminotomy, lumbar puncture, facet joint injection, and spinal needle insertion and placement. These studies had a low-to-medium methodological quality with a MERSQI mean score of 11.47 out of 18 (standard deviation=1.81). This review described the current state and applications of VR-based simulator training and assessment approaches in spinal procedures. Limitations, strengths, and future advancements of VR-based simulators for training and assessment in spinal surgery were explored. Higher-quality studies with patient-related outcome measures are needed. To establish further adaptation of VR-based simulators in spinal surgery, future evaluations need to improve the study quality, apply long-term study designs, and examine non-technical skills, as well as multidisciplinary team training. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Surface tension and wetting properties of rapeseed oil to biofuel conversion by-products

    NASA Astrophysics Data System (ADS)

    Muszyński, Siemowit; Sujak, Agnieszka; Stępniewski, Andrzej; Kornarzyński, Krzysztof; Ejtel, Marta; Kowal, Natalia; Tomczyk-Warunek, Agnieszka; Szcześniak, Emil; Tomczyńska-Mleko, Marta; Mleko, Stanisław

    2018-04-01

    This work presents a study on the surface tension, density and wetting behaviour of distilled glycerol, technical grade glycerol and the matter organic non-glycerin fraction. The research was conducted to expand the knowledge about the physical properties of wastes from the rapeseed oil biofuel production. The results show that the densities of technical grade glycerol (1.300 g cm-3) and distilled glycerol (1.267 g cm-3) did not differ and were significantly lower than the density of the matter organic non-glycerin fraction (1.579 g cm-3). Furthermore, the surface tension of distilled glycerol (49.6 mN m-1) was significantly higher than the matter organic non-glycerin fraction (32.7 mN m-1) and technical grade glycerol (29.5 mN m-1). As a result, both technical grade glycerol and the matter organic non-glycerin fraction had lower contact angles than distilled glycerol. The examined physical properties of distilled glycerol were found to be very close to that of the commercially available pure glycerol. The results suggest that technical grade glycerol may have potential application in the production of glycerol/fuel blends or biosurfactants. The presented results indicate that surface tension measurements are more useful when examining the quality of biofuel wastes than is density determination, as they allow for a more accurate analysis of the effects of impurities on the physical properties of the biofuel by-products.

  17. Role of occupational health services in the assessment and management of indoor air quality problems.

    PubMed

    Carrer, Paolo; Muzi, Giacomo

    2011-01-01

    The role of the occupational health services in the assessment and management of indoor air quality (IAQ) problems in non-industrial sectors (offices, banks, etc.) has been discussed by experts of the ICOH Scientific Committee on IAQ and Health and has been proposed as follow: 1. Collaboration in risk assessment--risk management; 2. Questionnaire survey; 3. Health surveillance (only when periodical health surveillance is already performed for other risks or when specific clinical examination of workers is required); 4. Health promotion (programs for a better IAQ management). A team approach with cooperation between medical and technical experts is recommended in the assessment and management of indoor air quality problems.

  18. Air Quality Modeling Technical Support Document for the 2008 Ozone NAAQS Cross-State Air Pollution Rule Proposal

    EPA Pesticide Factsheets

    In this technical support document (TSD) we describe the air quality modeling performed to support the proposed Cross-State Air Pollution Rule for the 2008 ozone National Ambient Air Quality Standards (NAAQS)

  19. Air Quality Modeling Technical Support Document for the 2015 Ozone NAAQS Preliminary Interstate Transport Assessment

    EPA Pesticide Factsheets

    In this technical support document (TSD) EPA describes the air quality modeling performed to support the 2015 ozone National Ambient Air Quality Standards (NAAQS) preliminary interstate transport assessment Notice of Data Availability (NODA).

  20. Reliability and Validity: A Sine Qua Non for Fair Assessment of Undergraduate Technical and Vocational Education Projects in Nigerian Universities

    ERIC Educational Resources Information Center

    John, A. C.

    2015-01-01

    The aim of the study was to examine the importance of reliability and validity as necessary foundation for fair assessment. The concepts of reliability, validity, fair assessment and their relationships were analysed. Qualities of fair assessment were discussed. A number of recommendations were made to make assessors be more cautious in award of…

  1. Fox Valley Technical College Quality First Process Model.

    ERIC Educational Resources Information Center

    Fox Valley Technical Coll., Appleton, WI.

    An overview is provided of the Quality First Process Model developed by Fox Valley Technical College (FVTC), Wisconsin, to provide guidelines for quality instruction and service consistent with the highest educational standards. The 16-step model involves activities that should be adaptable to any organization. The steps of the quality model are…

  2. Evaluation of an iterative model-based reconstruction of pediatric abdominal CT with regard to image quality and radiation dose.

    PubMed

    Aurumskjöld, Marie-Louise; Söderberg, Marcus; Stålhammar, Fredrik; von Steyern, Kristina Vult; Tingberg, Anders; Ydström, Kristina

    2018-06-01

    Background In pediatric patients, computed tomography (CT) is important in the medical chain of diagnosing and monitoring various diseases. Because children are more radiosensitive than adults, they require minimal radiation exposure. One way to achieve this goal is to implement new technical solutions, like iterative reconstruction. Purpose To evaluate the potential of a new, iterative, model-based method for reconstructing (IMR) pediatric abdominal CT at a low radiation dose and determine whether it maintains or improves image quality, compared to the current reconstruction method. Material and Methods Forty pediatric patients underwent abdominal CT. Twenty patients were examined with the standard dose settings and 20 patients were examined with a 32% lower radiation dose. Images from the standard examination were reconstructed with a hybrid iterative reconstruction method (iDose 4 ), and images from the low-dose examinations were reconstructed with both iDose 4 and IMR. Image quality was evaluated subjectively by three observers, according to modified EU image quality criteria, and evaluated objectively based on the noise observed in liver images. Results Visual grading characteristics analyses showed no difference in image quality between the standard dose examination reconstructed with iDose 4 and the low dose examination reconstructed with IMR. IMR showed lower image noise in the liver compared to iDose 4 images. Inter- and intra-observer variance was low: the intraclass coefficient was 0.66 (95% confidence interval = 0.60-0.71) for the three observers. Conclusion IMR provided image quality equivalent or superior to the standard iDose 4 method for evaluating pediatric abdominal CT, even with a 32% dose reduction.

  3. Exploring Socio-Technical Insights for Safe Nursing Handover.

    PubMed

    Wong, Ming Chao; Yee, Kwang Chien; Turner, Paul

    2017-01-01

    Current efforts to improve nursing handover frequently use prescriptive approaches based on research evidence of handover issues within a single nursing ward or nursing specialty. Despite reported handover improvement, few studies adequately consider the transferability of results to other nursing handover environments or acknowledge the unique attributes that supported sustained improvement. With the increasing diffusion of electronic tools it has become even more critical to ensure that socio-technical issues that may impact on the quality and safety of nursing handovers are identified. This paper describes a qualitative research project that examined nursing handover in three different wards - General Medicine, General Surgery and Department of Emergency Medicine in a tertiary teaching hospital. Through conduct of a detailed analysis of nursing handover processes, this paper highlights the similarities and differences in the handover among the three different wards and presents five key socio-technical insights to support safe nursing handover.

  4. TECHNICAL GUIDANCE DOCUMENT: CONSTRUCTION QUALITY MANAGEMENT FOR REMEDIAL ACTION AND REMEDIAL DESIGN WASTE CONTAINMENT SYSTEMS

    EPA Science Inventory

    This Technical Guidance Document is intended to augment the numerous construction quality control and construction quality assurance (CQC and CQA) documents that are available far materials associated with waste containment systems developed for Superfund site remediation. In ge...

  5. Technical quality of root canal treatment performed by undergraduate students using hand instrumentation: a meta-analysis.

    PubMed

    Ribeiro, D M; Réus, J C; Felippe, W T; Pacheco-Pereira, C; Dutra, K L; Santos, J N; Porporatti, A L; De Luca Canto, G

    2018-03-01

    The technical quality of root canal treatment (RCT) may impact on the outcome. The quality of education received during undergraduate school may be linked to the quality of treatment provided in general dental practice. In this context, the aim of this systematic review was to answer the following focused questions: (i) What is the frequency of acceptable technical quality of root fillings, assessed radiographically, performed by undergraduate students? (ii) What are the most common errors assessed radiographically and reported in these treatments? For this purpose, articles that evaluated the quality of root fillings performed by undergraduate students were selected. Data were collected based on predetermined criteria. The key features from the included studies were extracted. GRADE-tool assessed the quality of the evidence. MAStARI evaluated the methodological quality, and a meta-analysis on all studies was conducted. At the end of the screening, 24 articles were identified. Overall frequency of acceptable technical quality of root fillings was 48%. From this total, 52% related to anterior teeth, 49% to premolars and 26% to molars. The main procedural errors reported were ledge formation, furcation perforation, apical transportation and apical perforation. The heterogeneity amongst the studies was high (84-99%). Five studies had a high risk of bias, eight had a moderate risk, and 11 had low risk. The overall quality of evidence identified was very low. The conclusion was that technical quality of root fillings performed by undergraduate students is low, which may reveal that endodontic education has limited achievement at undergraduate level. A plan to improve the quality of root fillings, and by extrapolation the overall quality of root canal treatment, should be discussed by the staff responsible for endodontic education and training. © 2017 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  6. Wireless Robotic Communications in Urban Environments: Issues for the Fire Service

    DTIC Science & Technology

    2008-03-01

    affect signal propagation? Do some frequencies perform better than others in specific settings? • Radio Environment: How much impact might...of responders at each scenario, the radio frequency environment for each will be examined. Link budget calculations will be performed to assess...soldiers indicated that the main technical drawbacks were the narrow field of view, poor image quality, and limited radio range. The authors concluded

  7. Psychometric properties of the NEPSY-II affect recognition subtest in a preschool sample: a Rasch modeling approach.

    PubMed

    Yao, Shih-Ying; Bull, Rebecca; Khng, Kiat Hui; Rahim, Anisa

    2018-01-01

    Understanding a child's ability to decode emotion expressions is important to allow early interventions for potential difficulties in social and emotional functioning. This study applied the Rasch model to investigate the psychometric properties of the NEPSY-II Affect Recognition subtest, a U.S. normed measure for 3-16 year olds which assesses the ability to recognize facial expressions of emotion. Data were collected from 1222 children attending preschools in Singapore. We first performed the Rasch analysis with the raw item data, and examined the technical qualities and difficulty pattern of the studied items. We subsequently investigated the relation of the estimated affect recognition ability from the Rasch analysis to a teacher-reported measure of a child's behaviors, emotions, and relationships. Potential gender differences were also examined. The Rasch model fits our data well. Also, the NEPSY-II Affect Recognition subtest was found to have reasonable technical qualities, expected item difficulty pattern, and desired association with the external measure of children's behaviors, emotions, and relationships for both boys and girls. Overall, findings from this study suggest that the NEPSY-II Affect Recognition subtest is a promising measure of young children's affect recognition ability. Suggestions for future test improvement and research were discussed.

  8. Healthy Water Healthy People Field Monitoring Guide

    ERIC Educational Resources Information Center

    Project WET Foundation, 2003

    2003-01-01

    This 100-page manual serves as a technical reference for the "Healthy Water, Healthy People Water Quality Educators Guide" and the "Healthy Water Healthy People Testing Kits". Yielding in-depth information about ten water quality parameters, it answers questions about water quality testing using technical overviews, data interpretation guidelines,…

  9. The Effect of Ambient Water Quality on Lakefront Property Values: Evidence from Coeur d'Alene, Idaho

    NASA Astrophysics Data System (ADS)

    Liao, H.

    2015-12-01

    Climate warming is causing water temperatures to increase and subsequent changes in water quality. To develop innovative approaches for mitigating the possible negative social consequences of such changes, more research efforts are needed to investigate how people perceive and respond to ambient water quality. This research examines the amenity value of water quality in the areas centered on Lake Coeur d'Alene of Northern Idaho. Through a hedonic analysis, we find that two important water-quality variables have had significant effects on lakefront property values, including Secchi disc reading, a technical measure of water clarity, and the presence of Eurasian watermilfoil, an aquatic invasive species. We further explore the spatial heterogeneity of water-quality benefits along the urban-rural gradient and find that access to urban amenities has strengthened the water-quality benefits in the lakefront housing market. Our findings could be used to incentivize private property owners and stakeholders to commit time and funding to cope with the potential degradation of water quality under climate change.

  10. Quantitative and qualitative verification of data quality in the childbirth registers of two rural district hospitals in Western Kenya.

    PubMed

    Chiba, Yoko; Oguttu, Monica A; Nakayama, Takeo

    2012-06-01

    to verify the data quality of childbirth registers and explore factors that influence quality at two rural district hospitals in Western Kenya. a retrospective comparative case study for data quality of the 2006 childbirth registers by quantitative and qualitative methods. Siaya and Bondo District Hospitals. after confirming the physical condition and availability of childbirth registers, the total number of births; number of complete/incomplete data; and number of complete data that were illegible, incorrectly coded, inappropriate and unrecognised were verified quantitatively to evaluate accuracy and completeness. Data categories and instructions were examined qualitatively to assess the relevance, completeness and accuracy of the data. Semi-structured interviews were conducted with key informants to capture their views and factors that influence data quality. the childbirth registers used by the two hospitals were not developed by the Ministry of Health, and their supply to Bondo was interrupted. Of the 30 data categories in the registers, five for Siaya and 23 for Bondo were more than 20% incomplete. Data for number of antenatal consultations and use of human immunodeficiency virus drugs were at least 50% incomplete for both hospitals. The percentage of illegible, incorrectly coded and inappropriate data was relatively low, and only the place of residence had unrecognised data. Data categories in the registers did not correspond well with those of monthly reports, and inappropriate instructions suggested hidden inaccuracy among apparently valid data. Organisational impediments of the health information system in general, perinatal and intrapartum contexts were identified. data quality of the childbirth registers was unsatisfactory. Influential factors were primarily organisational and technical, which may have had an adverse effect on midwives' record keeping behaviour. data quality of the registers can be improved by re-examining technical challenges and organisational impediments at different levels. Midwives' awareness of data quality needs to be increased by sharing the purpose of the childbirth registers. Strong political commitment is also indispensable for putting these findings into action. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. Study of the Relevance of the Quality of Care, Operating Efficiency and Inefficient Quality Competition of Senior Care Facilities.

    PubMed

    Lin, Jwu-Rong; Chen, Ching-Yu; Peng, Tso-Kwei

    2017-09-11

    The purpose of this research is to examine the relation between operating efficiency and the quality of care of senior care facilities. We designed a data envelopment analysis, combining epsilon-based measure and metafrontier efficiency analyses to estimate the operating efficiency for senior care facilities, followed by an iterative seemingly unrelated regression to evaluate the relation between the quality of care and operating efficiency. In the empirical studies, Taiwan census data was utilized and findings include the following: Despite the greater operating scale of the general type of senior care facilities, their average metafrontier technical efficiency is inferior to that of nursing homes. We adopted senior care facility accreditation results from Taiwan as a variable to represent the quality of care and examined the relation of accreditation results and operating efficiency. We found that the quality of care of general senior care facilities is negatively related to operating efficiency; however, for nursing homes, the relationship is not significant. Our findings show that facilities invest more in input resources to obtain better ratings in the accreditation report. Operating efficiency, however, does not improve. Quality competition in the industry in Taiwan is inefficient, especially for general senior care facilities.

  12. Study of the Relevance of the Quality of Care, Operating Efficiency and Inefficient Quality Competition of Senior Care Facilities

    PubMed Central

    Lin, Jwu-Rong; Chen, Ching-Yu; Peng, Tso-Kwei

    2017-01-01

    The purpose of this research is to examine the relation between operating efficiency and the quality of care of senior care facilities. We designed a data envelopment analysis, combining epsilon-based measure and metafrontier efficiency analyses to estimate the operating efficiency for senior care facilities, followed by an iterative seemingly unrelated regression to evaluate the relation between the quality of care and operating efficiency. In the empirical studies, Taiwan census data was utilized and findings include the following: Despite the greater operating scale of the general type of senior care facilities, their average metafrontier technical efficiency is inferior to that of nursing homes. We adopted senior care facility accreditation results from Taiwan as a variable to represent the quality of care and examined the relation of accreditation results and operating efficiency. We found that the quality of care of general senior care facilities is negatively related to operating efficiency; however, for nursing homes, the relationship is not significant. Our findings show that facilities invest more in input resources to obtain better ratings in the accreditation report. Operating efficiency, however, does not improve. Quality competition in the industry in Taiwan is inefficient, especially for general senior care facilities. PMID:28892019

  13. Transformational leadership, initiating structure, and substitutes for leadership: a longitudinal study of research and development project team performance.

    PubMed

    Keller, Robert T

    2006-01-01

    Transformational leadership, initiating structure, and selected substitutes for leadership were studied as longitudinal predictors of performance in 118 research and development (R&D) project teams from 5 firms. As hypothesized, transformational leadership predicted 1-year-later technical quality, schedule performance, and cost performance and 5-year-later profitability and speed to market. Initiating structure predicted all the performance measures. The substitutes of subordinate ability and an intrinsically satisfying task each predicted technical quality and profitability, and ability predicted speed to market. Moderator effects for type of R&D work were hypothesized and found whereby transformational leadership was a stronger predictor of technical quality in research projects, whereas initiating structure was a stronger predictor of technical quality in development projects. Implications for leadership theory and research are discussed. (c) 2006 APA, all rights reserved.

  14. Statistical approaches used to assess and redesign surface water-quality-monitoring networks.

    PubMed

    Khalil, B; Ouarda, T B M J

    2009-11-01

    An up-to-date review of the statistical approaches utilized for the assessment and redesign of surface water quality monitoring (WQM) networks is presented. The main technical aspects of network design are covered in four sections, addressing monitoring objectives, water quality variables, sampling frequency and spatial distribution of sampling locations. This paper discusses various monitoring objectives and related procedures used for the assessment and redesign of long-term surface WQM networks. The appropriateness of each approach for the design, contraction or expansion of monitoring networks is also discussed. For each statistical approach, its advantages and disadvantages are examined from a network design perspective. Possible methods to overcome disadvantages and deficiencies in the statistical approaches that are currently in use are recommended.

  15. Rating teams' non-technical skills in the emergency department: A qualitative study of nurses' experience.

    PubMed

    Porter, Joanne E; Cant, Robyn P; Cooper, Simon J

    2018-05-01

    Non-technical skills (NTS) teamwork training can enhance clinicians' understanding of roles and improve communication. We evaluated a quality improvement project rating teams' NTS performance to determine the value of formal rating and debriefing processes. In two Australian emergency departments the NTS of resuscitation teams were rated by senior nurses and medical staff. Key measures were leadership, teamwork, and task management using a valid instrument: Team Emergency Assessment Measure (TEAM™). Emergency nurses were asked to attend a focus group from which key themes around the quality improvement process were identified. Main themes were: 'Team composition' (allocation of resuscitation team roles), 'Resuscitation leadership' (including both nursing and medical leadership roles) and 'TEAM™ ratings promote reflective practice' (providing staff a platform to discuss team effectiveness). Objective ratings were seen as enabling staff to provide feedback to other team members. Reflection on practice and debriefing were thought to improve communication, help define roles and responsibilities, and clarify leadership roles. Use of a non-technical skills rating scheme such as TEAM™ after team-based clinical resuscitation events was seen by emergency department nurses as feasible and a useful process for examining and improving multi-disciplinary practice, while improving team performance. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. An evaluation of client satisfaction with training programs and technical assistance provided by Florida's Coordinated School Health Program Office.

    PubMed

    Weiler, R M; Pigg, R M

    2000-11-01

    Client or customer satisfaction surveys assess the perceived quality of programs, products, services, and employee performance. Such assessments prove beneficial for evaluation and planning purposes. This survey examined the satisfaction of clients using the programs, services, and technical assistance provided through the Coordinated School Health Program Office (CSHPO) in the Florida Department of Education. Using the 42-item Client Satisfaction Survey, data were collected in summer 1999 from 300 of 574 clients (52.3%) who attended training sessions or sought technical assistance from CSHPO during 1996-1999. More than two-thirds (67.2%) of clients rated the training program as "very good" or "excellent" at increasing their understanding about the concept of a coordinated school health program. Overall, 69.7% of clients rated the training programs they attended as "very good" or "excellent." Resource materials and staff effectiveness rated positively as well. Findings confirmed client satisfaction with CSHPO's training programs, technical assistance, and staff. Information obtained through the client satisfaction survey can be used by CSHPO to assist in future program planning and resource allocations.

  17. Factors associated with the relationship between motorcycle deaths and economic growth.

    PubMed

    Law, Teik Hua; Noland, Robert B; Evans, Andrew W

    2009-03-01

    This paper examines the Kuznets curve relationship for motorcycle deaths. The Kuznets curve describes the inverted U-shape relationship between economic development and, in this case, motorcycle deaths. In early stages of development we expect deaths to increase with increasing motorization. Eventually deaths decrease as technical, policy and political institutions respond to demands for increased safety. We examine this effect as well as some of the factors which might explain the Kuznets relationship: in particular motorcycle helmet laws, medical care and technology improvements, and variables representing the quality of political institutions. We apply a fixed effects negative binomial regression analysis on a panel of 25 countries covering the period 1970-1999. Our results broadly suggest that implementation of road safety regulation, improvement in the quality of political institutions, and medical care and technology developments have contributed to reduced motorcycle deaths.

  18. Cone beam computed tomography and intraoral radiography for diagnosis of dental abnormalities in dogs and cats

    PubMed Central

    Silva, Luiz Antonio F.; Barriviera, Mauricio; Januário, Alessandro L.; Bezerra, Ana Cristina B.; Fioravanti, Maria Clorinda S.

    2011-01-01

    The development of veterinary dentistry has substantially improved the ability to diagnose canine and feline dental abnormalities. Consequently, examinations previously performed only on humans are now available for small animals, thus improving the diagnostic quality. This has increased the need for technical qualification of veterinary professionals and increased technological investments. This study evaluated the use of cone beam computed tomography and intraoral radiography as complementary exams for diagnosing dental abnormalities in dogs and cats. Cone beam computed tomography was provided faster image acquisition with high image quality, was associated with low ionizing radiation levels, enabled image editing, and reduced the exam duration. Our results showed that radiography was an effective method for dental radiographic examination with low cost and fast execution times, and can be performed during surgical procedures. PMID:22122905

  19. A Novel Approach for Quality Education towards Industry Expectations

    ERIC Educational Resources Information Center

    Santhiyakumari, N.; Babu, C.; Gomathi, C.; Rajesh, K.; Shenbagapriya, M.

    2014-01-01

    This paper presents a new method to improve the quality in technical education in order to meet the industry expectations. The quality of education and training being imparted in the technical education institutions varies from excellent to poor, with some institutions comparing favourably with the best in the world. Few others are suffering from…

  20. Project T.E.A.M. (Technical Education Advancement Modules). Advanced Statistical Process Control.

    ERIC Educational Resources Information Center

    Dunlap, Dale

    This instructional guide, one of a series developed by the Technical Education Advancement Modules (TEAM) project, is a 20-hour advanced statistical process control (SPC) and quality improvement course designed to develop the following competencies: (1) understanding quality systems; (2) knowing the process; (3) solving quality problems; and (4)…

  1. How to Recognize a Quality Technical Education Program.

    ERIC Educational Resources Information Center

    Doty, Charles R.

    Criteria for the evaluation of quality technical educational programs must be identified if follow-up studies are to be effective. Current research shows that problems in the development of such criteria include the tendency to evaluate programs on the basis of organizational structure rather than on the quality of the instructional program…

  2. System Issues Related to Implementing on the Internet

    NASA Technical Reports Server (NTRS)

    Mackey, William; Bagg, Thomas C., III

    1999-01-01

    Implementing capabilities on the World Wide Web should never be taken lightly. A good systems engineer is able to examine such implementations from all points of view, including political, legal, security, access, technical deployment, and quality. The evacuation discussed in this paper was conducted to ensure that the National Aeronautics and Space Administration (NASA) was proceeding in a correct direction by implementing RECALL a Lessons Learned System on the Web and, subsequently, did so successfully. The systems approach extended well beyond technical implementation to several issue that are not often addressed by an implementation team. The resulting evaluation increased the team's sensitivity to such issues and, in fact, the authors believe that the evaluation provided as much benefit as the system itself.

  3. Iterative Reconstruction Techniques in Abdominopelvic CT: Technical Concepts and Clinical Implementation.

    PubMed

    Patino, Manuel; Fuentes, Jorge M; Singh, Sarabjeet; Hahn, Peter F; Sahani, Dushyant V

    2015-07-01

    This article discusses the clinical challenge of low-radiation-dose examinations, the commonly used approaches for dose optimization, and their effect on image quality. We emphasize practical aspects of the different iterative reconstruction techniques, along with their benefits, pitfalls, and clinical implementation. The widespread use of CT has raised concerns about potential radiation risks, motivating diverse strategies to reduce the radiation dose associated with CT. CT manufacturers have developed alternative reconstruction algorithms intended to improve image quality on dose-optimized CT studies, mainly through noise and artifact reduction. Iterative reconstruction techniques take unique approaches to noise reduction and provide distinct strength levels or settings.

  4. Ushering in the Twenty First Century: Emphasis on the Rural South. Proceedings of the Professional Agricultural Workers Conference (44th, Tuskegee, Alabama, December 7-9, 1986).

    ERIC Educational Resources Information Center

    Williams, Thomas T., Ed.

    This volume includes material by providers and users of technical agricultural assistance on ways to improve the quality of life for clientele served by land-grant colleges and Tuskegee University. The conference theme involved issues emerging for rural Southern farms as they enter the 21st century. In examining alternatives for the future, the…

  5. Educational Television Personnel's Review of the Technical Quality, Content Criteria, and Marketability of AEL's "Around the Bend" Pilot Tapes. Technical Report No. 31.

    ERIC Educational Resources Information Center

    Shively, Joe E.

    In order to determine whether Appalachia Educational Laboratory (AEL) had the capability of producing a TV series of high technical quality with content that met criteria designed for the selection of children's television programs, a pilot tape produced by AEL was submitted for rating to educational television (ETV) specialists from the State…

  6. The CHPRC Groundwater and Technical Integration Support (Master Project) Quality Assurance Management Plan

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fix, N. J.

    The scope of the CH2M Hill Plateau Remediation Company, LLC (CHPRC) Groundwater and Technical Integration Support (Master Project) is for Pacific Northwest National Laboratory staff to provide technical and integration support to CHPRC. This work includes conducting investigations at the 300-FF-5 Operable Unit and other groundwater operable units, and providing strategic integration, technical integration and assessments, remediation decision support, and science and technology. The projects under this Master Project will be defined and included within the Master Project throughout the fiscal year, and will be incorporated into the Master Project Plan. This Quality Assurance Management Plan provides the quality assurancemore » requirements and processes that will be followed by the CHPRC Groundwater and Technical Integration Support (Master Project) and all releases associated with the CHPRC Soil and Groundwater Remediation Project. The plan is designed to be used exclusively by project staff.« less

  7. EEG in children, in the laboratory or at the patient's bedside.

    PubMed

    Kaminska, A; Cheliout-Heraut, F; Eisermann, M; Touzery de Villepin, A; Lamblin, M D

    2015-03-01

    In pediatrics, EEG recordings are performed on patients from the neonatal period up to young adults. This means adapting techniques to many different conditions, concerning not only the patient's age, the need for asepsis and the patient's behavior, but also the environment (e.g. in the laboratory, at the patient's bedside, or in the neonatal intensive care unit [NICU]). Technical requirements depend on age, indication and the type of examination; in infancy, there should be a minimum of 12 EEG electrodes, ECG and respiration recording. In epileptology, surface EMG is also necessary to characterize the type of seizures and refine the diagnosis of epilepsy syndrome, on which physicians will base their treatment choice. The role of the EEG technician is essential because the quality of the recording, its analysis and conclusion will depend on the quality of the technical set-up and the interaction with the child. Sleep is a systematic part of the study up to the age of 5 years for several reasons: sleep EEG yields information on brain maturation; the EEG tracing during wakefulness can contain too many artefacts; and some grapho-elements, key to the diagnosis, only appear during sleep. The time of the examination must be chosen according to the child's usual nap times, possibly after sleep deprivation. Grapho-elements and spatio-temporal organization of the EEG vary with age, and normal variants and unusual aspects are quite wide for any given age; this is why a physician experienced in pediatric EEG should perform the interpretation. This chapter concerns EEG performed in infants, children and adolescents, its technical aspects according to age and indications (general pediatrics, emergency, epilepsy). Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  8. Interactions between Patients, Providers, and Health Systems and Technical Quality of Care

    PubMed Central

    Yelin, Edward; Yazdany, Jinoos; Tonner, Chris; Trupin, Laura; Criswell, Lindsey A.; Katz, Patricia; Schmajuk, Gabriela

    2014-01-01

    Objectives Prior studies have established disparities by race/ethnicity and socioeconomic status (SES) in the kind, quantity, and technical quality of SLE care and outcomes. In this study we evaluate whether disparities exist in assessments of interactions with health care providers and health plans and whether such interactions affect the technical quality of SLE care. Methods Data derive from the Lupus Outcomes Study (LOS). Principal data collection is an annual structured phone interview including items from the Consumer Assessment of Health Plans and Interpersonal Processes of Care Scale measuring dimensions of health care interactions. We use general estimating equations to assess whether disparities exist by race/ethnicity and SES in being in the lowest quartile of ratings of such interactions and whether ratings in the lowest quartile of interactions are associated with technical quality of care after adjustment for sociodemographic and disease characteristics. Results In the 2012 LOS interview, there were 793 respondents, of whom 640 had ≥1 visits to their principal SLE provider. Non-white race/ethnicity and education were not associated with low ratings on any dimension of provider or system interaction; poverty was associated only with low ratings of health plan interactions. After adjustment for demographics, SLE status, and health care variables, ratings in the lowest quartile on all dimensions were associated with significantly lower technical quality of care. Conclusions Ratings in the lowest quartile on all dimensions of interactions with providers and the health care system were associated with lower technical quality of care, potentially resulting in poorer SLE outcomes. PMID:25132660

  9. Interactions between patients, providers, and health systems and technical quality of care.

    PubMed

    Yelin, Edward; Yazdany, Jinoos; Tonner, Chris; Trupin, Laura; Criswell, Lindsey A; Katz, Patricia; Schmajuk, Gabriela

    2015-03-01

    Prior studies have established disparities by race/ethnicity and socioeconomic status (SES) in the kind, quantity, and technical quality of systemic lupus erythematosus (SLE) care and outcomes. In this study we evaluate whether disparities exist in assessments of interactions with health care providers and health plans and whether such interactions affect the technical quality of SLE care. Data derive from the Lupus Outcomes Study (LOS). Principal data collection is an annual structured phone interview including items from the Consumer Assessment of Health Plans and Interpersonal Processes of Care Scale measuring dimensions of health care interactions. We use general estimating equations to assess whether disparities exist by race/ethnicity and SES in being in the lowest quartile of ratings of such interactions and whether ratings in the lowest quartile of interactions are associated with technical quality of care after adjustment for sociodemographic and disease characteristics. In the 2012 LOS interview, there were 793 respondents, of whom 640 had ≥1 visit to their principal SLE provider. Nonwhite race/ethnicity and education were not associated with low ratings on any dimension of provider or system interaction; poverty was associated only with low ratings of health plan interactions. After adjustment for demographics, SLE status, and health care variables, ratings in the lowest quartile on all dimensions were associated with significantly lower technical quality of care. Ratings in the lowest quartile on all dimensions of interactions with providers and the health care system were associated with lower technical quality of care, potentially resulting in poorer SLE outcomes. Copyright © 2015 by the American College of Rheumatology.

  10. State-local policy management project. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1981-08-01

    The report describes case studies to explore new approaches for increasing state and local coordination in planning and managing programs in areas with significant scientific and technical components such as energy and environment. Specifically, the case studies reveal efforts of various states in the areas of energy conservation, weatherization, emergency preparedness, and air quality. Successes and failures of Maryland's decentralized approach to energy conservation are documented; success of the thermal and lighting efficiency standards program in Texas is discussed; state aid for local energy conservation programs in Clinton County, Michigan, is reviewed; and the success of the weatherization program inmore » Oregon is examined. Pilot programs in weatherization in Pennsylvania are shown to have led a statewide effort. Two Minnesota projects in emergency preparedness are documented and factors for success are listed. In addition, long-range planning for fuel shortages in New York is examined and the benefits of regional planning in Fairfax County, Virgina, are noted. Efforts are examined to improve air quality in Ohio, California, and New Jersey.« less

  11. Quality and Quality Assurance in Technical and Vocational Education and Training. Thematic Studies

    ERIC Educational Resources Information Center

    Seyfried, Erwin

    2008-01-01

    In many countries in both the Mediterranean region and the European Union (EU), interest in the quality of, and improvements to, technical and vocational education and training (TVET) systems has increased progressively in recent years. The main reason underlying this interest is a growing awareness of the key role played by education and training…

  12. 7 CFR 3401.17 - Review criteria.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) COOPERATIVE STATE RESEARCH, EDUCATION, AND EXTENSION.... Overall scientific and technical quality of proposal 10 2. Scientific and technical quality of the.... Feasibility of attaining objectives; adequacy of professional training and experience, facilities and...

  13. A 10 year (2000–2010) systematic review of interventions to improve quality of care in hospitals

    PubMed Central

    2012-01-01

    Background Against a backdrop of rising healthcare costs, variability in care provision and an increased emphasis on patient satisfaction, the need for effective interventions to improve quality of care has come to the fore. This is the first ten year (2000–2010) systematic review of interventions which sought to improve quality of care in a hospital setting. This review moves beyond a broad assessment of outcome significance levels and makes recommendations for future effective and accessible interventions. Methods Two researchers independently screened a total of 13,195 English language articles from the databases PsychInfo, Medline, PubMed, EmBase and CinNahl. There were 120 potentially relevant full text articles examined and 20 of those articles met the inclusion criteria. Results Included studies were heterogeneous in terms of approach and scientific rigour and varied in scope from small scale improvements for specific patient groups to large scale quality improvement programmes across multiple settings. Interventions were broadly categorised as either technical (n = 11) or interpersonal (n = 9). Technical interventions were in the main implemented by physicians and concentrated on improving care for patients with heart disease or pneumonia. Interpersonal interventions focused on patient satisfaction and tended to be implemented by nursing staff. Technical interventions had a tendency to achieve more substantial improvements in quality of care. Conclusions The rigorous application of inclusion criteria to studies established that despite the very large volume of literature on quality of care improvements, there is a paucity of hospital interventions with a theoretically based design or implementation. The screening process established that intervention studies to date have largely failed to identify their position along the quality of care spectrum. It is suggested that this lack of theoretical grounding may partly explain the minimal transfer of health research to date into policy. It is recommended that future interventions are established within a theoretical framework and that selected quality of care outcomes are assessed using this framework. Future interventions to improve quality of care will be most effective when they use a collaborative approach, involve multidisciplinary teams, utilise available resources, involve physicians and recognise the unique requirements of each patient group. PMID:22925835

  14. State Department Early Childhood Education Program Specialists' Review of the Content and Technical Quality of AEL's "Around the Bend" Pilot Tapes. Technical Report No. 30.

    ERIC Educational Resources Information Center

    Shively, Joe E.

    In order to determine whether Appalachia Educational Laboratory (AEL) had the capacity to produce a TV series of technical quality and whose content meets criteria designed for the selection of children's television programs, two pilot tapes were produced by AEL and submitted for rating to seven early childhood education specialists from seven…

  15. A comparison of how behavioral health organizations utilize training to prepare for health care reform.

    PubMed

    Stanhope, Victoria; Choy-Brown, Mimi; Barrenger, Stacey; Manuel, Jennifer; Mercado, Micaela; McKay, Mary; Marcus, Steven C

    2017-02-14

    Under the Affordable Care Act, States have obtained Medicaid waivers to overhaul their behavioral health service systems to improve quality and reduce costs. Critical to implementation of broad service delivery reforms has been the preparation of organizations responsible for service delivery. This study focused on one large-scale initiative to overhaul its service system with the goal of improving service quality and reducing costs. The study examined the participation of behavioral health organizations in technical assistance efforts and the extent to which organizational factors related to their participation. This study matched two datasets to examine the organizational characteristics and training participation for 196 behavioral health organizations. Organizational characteristics were drawn from the Substance Abuse and Mental Health Services Administration National Mental Health Services Survey (N-MHSS). Training variables were drawn from the Clinical Technical Assistance Center's master training database. Chi-square analyses and multivariate logistic regression models were used to examine the proportion of organizations that participated in training, the organizational characteristics (size, population served, service quality, infrastructure) that predicted participation in training, and for those who participated, the type (clinical or business) and intensity of training (webinar, learning collaborative, in-person) they received. Overall 142 (72. 4%) of the sample participated in training. Organizations who pursued training were more likely to be large in size (p = .02), serve children in addition to adults (p < .01), provide child evidence-based practices (p = .01), and use computerized scheduling (p = .01). Of those trained, 95% participated in webinars, 64% participated in learning collaboratives and 35% participated in in-person trainings. More organizations participated in business trainings than clinical (63.8 vs. 59.2%). Organizations serving children had higher odds of participating in both clinical training (OR = 5.91, p < .01) and business training (OR = 4.24, p < .01) than those that did not serve children. The majority of organizations participated in trainings indicating desire for technical assistance to prepare for health care reform. Larger organizations and organizations serving children were more likely to participate potentially indicating increased interest in preparation. Over half participated in business trainings highlighting interest in learning to improve efficiency. Further understanding is needed to support organizational readiness for health care reform initiatives among behavioral health organizations.

  16. The Taguchi Method Application to Improve the Quality of a Sustainable Process

    NASA Astrophysics Data System (ADS)

    Titu, A. M.; Sandu, A. V.; Pop, A. B.; Titu, S.; Ciungu, T. C.

    2018-06-01

    Taguchi’s method has always been a method used to improve the quality of the analyzed processes and products. This research shows an unusual situation, namely the modeling of some parameters, considered technical parameters, in a process that is wanted to be durable by improving the quality process and by ensuring quality using an experimental research method. Modern experimental techniques can be applied in any field and this study reflects the benefits of interacting between the agriculture sustainability principles and the Taguchi’s Method application. The experimental method used in this practical study consists of combining engineering techniques with experimental statistical modeling to achieve rapid improvement of quality costs, in fact seeking optimization at the level of existing processes and the main technical parameters. The paper is actually a purely technical research that promotes a technical experiment using the Taguchi method, considered to be an effective method since it allows for rapid achievement of 70 to 90% of the desired optimization of the technical parameters. The missing 10 to 30 percent can be obtained with one or two complementary experiments, limited to 2 to 4 technical parameters that are considered to be the most influential. Applying the Taguchi’s Method in the technique and not only, allowed the simultaneous study in the same experiment of the influence factors considered to be the most important in different combinations and, at the same time, determining each factor contribution.

  17. Small physician practices in new york needed sustained help to realize gains in quality from use of electronic health records.

    PubMed

    Ryan, Andrew M; Bishop, Tara F; Shih, Sarah; Casalino, Lawrence P

    2013-01-01

    The 2009 American Recovery and Reinvestment Act spurred adoption of electronic health records (EHRs) in the United States, through such measures as financial incentives to providers through Medicare and Medicaid and regional extension centers, which provide ongoing technical assistance to practices. Yet the relationship between EHR adoption and quality of care remains poorly understood. We evaluated the early effects on quality of the Primary Care Information Project, which provides subsidized EHRs and technical assistance to primary care practices in underserved neighborhoods in New York City, using the regional extension center model. We found that just general participation in, or exposure to, the project was not enough to improve quality of care. It took sustained exposure on the part of these practices and technical assistance to them before they demonstrated improvement on measures of care most likely to be affected by the use of electronic health records, such as cancer screenings and care for patients with diabetes. Participating in the Primary Care Information Project for nine or more months was associated with significantly improved quality, but only for this limited group of quality measures and only for physicians receiving extensive technical assistance.

  18. Designing with Protocells: Applications of a Novel Technical Platform

    PubMed Central

    Armstrong, Rachel

    2014-01-01

    The paper offers a design perspective on protocell applications and presents original research that characterizes the life-like qualities of the Bütschli dynamic droplet system, as a particular “species” of protocell. Specific focus is given to the possibility of protocell species becoming a technical platform for designing and engineering life-like solutions to address design challenges. An alternative framing of the protocell, based on process philosophy, sheds light on its capabilities as a technology that can deal with probability and whose ontology is consistent with complexity, nonlinear dynamics and the flow of energy and matter. However, the proposed technical systems do not yet formally exist as products or mature technologies. Their potential applications are therefore experimentally examined within a design context as architectural “projects”—an established way of considering proposals that have not yet been realized, like an extended hypothesis. Exemplary design-led projects are introduced, such as The Hylozoic Ground and Future Venice, which aim to “discover”, rather than “solve”, challenges to examine a set of possibilities that have not yet been resolved. The value of such exploration in design practice is in opening up a set of potential directions for further assessment before complex challenges are procedurally implemented. PMID:25370381

  19. Efficiency disparities among community hospitals in Tennessee: do size, location, ownership, and network matter?

    PubMed

    Roh, Chul-Young; Moon, M Jae; Jung, Kwangho

    2013-11-01

    This study examined the impact of ownership, size, location, and network on the relative technical efficiency of community hospitals in Tennessee for the 2002-2006 period, by applying data envelopment analysis (DEA) to measure technical efficiency (decomposed into scale efficiency and pure technical efficiency). Data envelopment analysis results indicate that medium-size hospitals (126-250 beds) are more efficient than their counterparts. Interestingly, public hospitals are significantly more efficient than private and nonprofit hospitals in Tennessee, and rural hospitals are more efficient than urban hospitals. This is the first study to investigate whether hospital networks with other health care providers affect hospital efficiency. Results indicate that community hospitals with networks are more efficient than non-network hospitals. From a management and policy perspective, this study suggests that public policies should induce hospitals to downsize or upsize into optional size, and private hospitals and nonprofit hospitals should change their organizational objectives from profit-driven to quality-driven.

  20. NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 6: Aerospace knowledge diffusion in the academic community: A report of phase 3 activities of the NASA/DOD Aerospace Knowledge Diffusion Research Project

    NASA Technical Reports Server (NTRS)

    Pinelli, Thomas E.; Kennedy, John M.

    1990-01-01

    Descriptive and analytical data regarding the flow of aerospace-based scientific and technical information (STI) in the academic community are presented. An overview is provided of the Federal Aerospace Knowledge Diffusion Research Project, illustrating a five-year program on aerospace knowledge diffusion. Preliminary results are presented of the project's research concerning the information-seeking habits, practices, and attitudes of U.S. aerospace engineering and science students and faculty. The type and amount of education and training in the use of information sources are examined. The use and importance ascribed to various information products by U.S. aerospace faculty and students including computer and other information technology is assessed. An evaluation of NASA technical reports is presented and it is concluded that NASA technical reports are rated high in terms of quality and comprehensiveness, citing Engineering Index and IAA as the most frequently used materials by faculty and students.

  1. The effect of normative social forces on managed care organizations: implications for strategic management.

    PubMed

    Kirby, E G; Sebastian, J G

    1998-01-01

    Drawing on institutional theory, this study examines how adherence to a number of "institutional" and "technical" environmental forces can influence the business success of managed care organizations (MCOs). The standards studied include: (1) institutional forces: socially accepted procedures for delivering care (access to quality care, availability of information, and delivery of care in a personal manner); and (2) technical forces: industry standards for cost control and efficient use of financial and medical resources. The most significant finding is that successful MCOs must conform to both institutional and technical forces to be successful. MCOs that conform to either one or the other type of standard were no more successful than those that conformed to neither. These findings have several important implications for MCO strategy. First, to be successful, MCO executives must understand the external environment in which they operate. They must anticipate and respond to shifts in that environment. Second, this understanding of the external environment must place equal emphasis on societal demands (e.g., for accessible care and information) and on technical demands (e.g., for cost-efficient care). These findings may well reflect that once managed care penetration reaches relatively high levels, marketshare can no longer be gained through cost-efficiency alone; rather, enrollee satisfaction based on societal demands becomes a key factor in maintaining and gaining marketshare. Institutional theory provides' some strategies for accomplishing these goals. Cost-containment strategies include implementing policies for cutting costs in areas that do not affect the quality of care, such as using generic drugs and reducing administrative excesses and redundancies. At the same time, MCOs must implement strategies aimed at improving conformity to prevailing societal perceptions of appropriate care, including providing patients more freedom to choose their physicians and encouraging and rewarding care providers for being friendly and personable. An MCO should work to inform the public of the organization's efforts to provide high-quality, low-cost medical care in a friendly, convenient manner.

  2. Technical report writing

    NASA Technical Reports Server (NTRS)

    Vidoli, Carol A.

    1992-01-01

    This manual covers the fundamentals of organizing, writing, and reviewing NASA technical reports. It was written to improve the writing skills of LeRC technical authors and the overall quality of their reports.

  3. The impact of fatigue on the non-technical skills performance of critical care air ambulance clinicians.

    PubMed

    Myers, J A; Powell, D M C; Aldington, S; Sim, D; Psirides, A; Hathaway, K; Haney, M F

    2017-11-01

    The relationship between fatigue-related risk and impaired clinical performance is not entirely clear. Non-technical factors represent an important component of clinical performance and may be sensitive to the effects of fatigue. The hypothesis was that the sum score of overall non-technical performance is degraded by fatigue. Nineteen physicians undertook two different simulated air ambulance missions, once when rested, and once when fatigued (randomised crossover design). Trained assessors blinded to participants' fatigue status performed detailed structured assessments based on expected behaviours in four non-technical skills domains: teamwork, situational awareness, task management, and decision making. Participants also provided self-ratings of their performance. The primary endpoint was the sum score of overall non-technical performance. The main finding, the overall non-technical skills performance rating of the clinicians, was better in rested than fatigued states (mean difference with 95% CI, 2.8 [2.2-3.4]). The findings remained consistent across individual non-technical skills domains; also when controlling for an order effect and examining the impact of a number of possible covariates. There was no difference in self-ratings of clinical performance between rested and fatigued states. Non-technical performance of critical care air transfer clinicians is degraded when they are fatigued. Fatigued clinicians may fail to recognise the degree to which their performance is compromised. These findings represent risk to clinical care quality and patient safety in the dynamic and isolated environment of air ambulance transfer. © 2017 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

  4. Development of the information model for consumer assessment of key quality indicators by goods labelling

    NASA Astrophysics Data System (ADS)

    Koshkina, S.; Ostrinskaya, L.

    2018-04-01

    An information model for “key” quality indicators of goods has been developed. This model is based on the assessment of f standardization existing state and the product labeling quality. According to the authors’ opinion, the proposed “key” indicators are the most significant for purchasing decision making. Customers will be able to use this model through their mobile technical devices. The developed model allows to decompose existing processes in data flows and to reveal the levels of possible architectural solutions. In-depth analysis of the presented information model decomposition levels will allow determining the stages of its improvement and to reveal additional indicators of the goods quality that are of interest to customers in the further research. Examining the architectural solutions for the customer’s information environment functioning when integrating existing databases will allow us to determine the boundaries of the model flexibility and customizability.

  5. Technical flaws in multiple-choice questions in the access exam to medical specialties ("examen MIR") in Spain (2009-2013).

    PubMed

    Rodríguez-Díez, María Cristina; Alegre, Manuel; Díez, Nieves; Arbea, Leire; Ferrer, Marta

    2016-02-03

    The main factor that determines the selection of a medical specialty in Spain after obtaining a medical degree is the MIR ("médico interno residente", internal medical resident) exam. This exam consists of 235 multiple-choice questions with five options, some of which include images provided in a separate booklet. The aim of this study was to analyze the technical quality of the multiple-choice questions included in the MIR exam over the last five years. All the questions included in the exams from 2009 to 2013 were analyzed. We studied the proportion of questions including clinical vignettes, the number of items related to an image and the presence of technical flaws in the questions. For the analysis of technical flaws, we adapted the National Board of Medical Examiners (NBME) guidelines. We looked for 18 different issues included in the manual, grouped into two categories: issues related to testwiseness and issues related to irrelevant difficulties. The final number of questions analyzed was 1,143. The percentage of items based on clinical vignettes increased from 50% in 2009 to 56-58% in the following years (2010-2013). The percentage of items based on an image increased progressively from 10% in 2009 to 15% in 2012 and 2013. The percentage of items with at least one technical flaw varied between 68 and 72%. We observed a decrease in the percentage of items with flaws related to testwiseness, from 30% in 2009 to 20% in 2012 and 2013. While most of these issues decreased dramatically or even disappeared (such as the imbalance in the correct option numbers), the presence of non-plausible options remained frequent. With regard to technical flaws related to irrelevant difficulties, no improvement was observed; this is especially true with respect to negative stem questions and "hinged" questions. The formal quality of the MIR exam items has improved over the last five years with regard to testwiseness. A more detailed revision of the items submitted, checking systematically for the presence of technical flaws, could improve the validity and discriminatory power of the exam, without increasing its difficulty.

  6. Strategic plan for science-U.S. Geological Survey, Ohio Water Science Center, 2010-15

    USGS Publications Warehouse

    ,

    2010-01-01

    This Science Plan identifies specific scientific and technical programmatic issues of current importance to Ohio and the Nation. An examination of those issues yielded a set of five major focus areas with associated science goals and strategies that the Ohio Water Science Center will emphasize in its program during 2010-15. A primary goal of the Science Plan is to establish a relevant multidisciplinary scientific and technical program that generates high-quality products that meet or exceed the expectations of our partners while supporting the goals and initiatives of the U.S. Geological Survey. The Science Plan will be used to set the direction of new and existing programs and will influence future training and hiring decisions by the Ohio Water Science Center.

  7. NASA guidelines for assuring the adequacy and appropriateness of security safeguards in sensitive applications

    NASA Technical Reports Server (NTRS)

    Tompkins, F. G.

    1984-01-01

    The Office of Management and Budget (OMB) Circular A-71, transmittal Memorandum No. 1, requires that each agency establish a management control process to assure that appropriate administrative, physical and technical safeguards are incorporated into all new computer applications. In addition to security specifications, the management control process should assure that the safeguards are adequate for the application. The security activities that should be integral to the system development process are examined. The software quality assurance process to assure that adequate and appropriate controls are incorporated into sensitive applications is also examined. Security for software packages is also discussed.

  8. SU-E-CAMPUS-J-04: Image Guided Radiation Therapy (IGRT): Review of Technical Standards and Credentialing in Radiotherapy Clinical Trials

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Giaddui, T; Chen, W; Yu, J

    2014-06-15

    Purpose: To review IGRT credentialing experience and unexpected technical issues encountered in connection with advanced radiotherapy technologies as implemented in RTOG clinical trials. To update IGRT credentialing procedures with the aim of improving the quality of the process, and to increase the proportion of IGRT credentialing compliance. To develop a living disease site-specific IGRT encyclopedia. Methods: Numerous technical issues were encountered during the IGRT credentialing process. The criteria used for credentialing review were based on: image quality; anatomy included in fused data sets and shift results. Credentialing requirements have been updated according to the AAPM task group reports for IGRTmore » to ensure that all required technical items are included in the quality review process. Implementation instructions have been updated and expanded for recent protocols. Results: Technical issues observed during the credentialing review process include, but are not limited to: poor quality images; inadequate image acquisition region; poor data quality; shifts larger than acceptable; no soft tissue surrogate. The updated IGRT credentialing process will address these issues and will also include the technical items required from AAPM: TG 104; TG 142 and TG 179 reports. An instruction manual has been developed describing a remote credentialing method for reviewers. Submission requirements are updated, including images/documents as well as facility questionnaire. The review report now includes summary of the review process and the parameters that reviewers check. We have reached consensus on the minimum IGRT technical requirement for a number of disease sites. RTOG 1311(NRG-BR002A Phase 1 Study of Stereotactic Body Radiotherapy (SBRT) for the Treatment of Multiple Metastases) is an example, here; the protocol specified the minimum requirement for each anatomical sites (with/without fiducials). Conclusion: Technical issues are identified and reported. IGRT guidelines are updated, with the corresponding credentialing requirements. An IGRT encyclopedia describing site-specific implementation issues is currently in development.« less

  9. DEVELOPMENT OF INTERNATIONAL STANDARDS FOR AIR QUALITY MONITORING AND CONTROL

    EPA Science Inventory

    This report presents a description of the activities and accomplishments of the American Society for Testing and Materials' U. S. Technical Advisory Group (TAG) to the International Standards Organization's Technical Committee 146 on Air Quality. The purpose of the TAG is to re...

  10. Environmental effects of dredging. Documentation of the efqual module for ADDAMS: Comparison of predicted effluent water quality with standards. Technical notes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Palermo, M.R.; Schroeder, P.R.

    This technical note describes a technique for comparison of the predicted quality of effluent discharged from confined dredged material disposal areas with applicable water quality standards. This note also serves as documentation of a computer program called EFQUAL written for that purpose as part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

  11. Comprehensive optimization process of paranasal sinus radiography.

    PubMed

    Saarakkala, S; Nironen, K; Hermunen, H; Aarnio, J; Heikkinen, J O

    2009-04-01

    The optimization of radiological examinations is important in order to reduce unnecessary patient radiation exposure. To perform a comprehensive optimization process for paranasal sinus radiography at Mikkeli Central Hospital, Finland. Patients with suspicion of acute sinusitis were imaged with a Kodak computed radiography (CR) system (n=20) and with a Philips digital radiography (DR) system (n=30) using focus-detector distances (FDDs) of 110 cm, 150 cm, or 200 cm. Patients' radiation exposure was determined in terms of entrance surface dose and dose-area product. Furthermore, an anatomical phantom was used for the estimation of point doses inside the head. Clinical image quality was evaluated by an experienced radiologist, and physical image quality was evaluated from the digital radiography phantom. Patient doses were significantly lower and image quality better with the DR system compared to the CR system. The differences in patient dose and physical image quality were small with varying FDD. Clinical image quality of the DR system was lowest with FDD of 200 cm. Further, imaging with FDD of 150 cm was technically easier for the technologist to perform than with FDD of 110 cm. After optimization, it was recommended that the DR system with FDD of 150 cm should always be used at Mikkeli Central Hospital. We recommend this kind of comprehensive approach in all optimization processes of radiological examinations.

  12. ERD WATERSHED AND WATER QUALITY MODEL DEVELOPMENT AND TECHNICAL SUPPORT PROGRAM

    EPA Science Inventory

    The ERD has a long history in providing model research and development and technical support to Regions, States and the Office of Water for watersheds/water quality ecosystem research. The ERD efforts are described in major subtasks comprising the Program. Briefly, these are:

  13. Our built and natural environments : a technical review of the interactions between land use, transportation, and environmental quality

    DOT National Transportation Integrated Search

    2001-01-01

    In recent years interest has grown in Smart Growth as a mechanism for improving environmental quality. In Our Built and Natural Environments, the U.S. Environmental Protection Agency (EPA) summarizes technical research on the relationship between the...

  14. Technical Support Documents Used to Develop the Chesapeake Bay TMDL

    EPA Pesticide Factsheets

    The Chesapeake Bay TMDL development was supported by several technical documents for water quality standards and allocation methodologies specific to the Chesapeake Bay. This page provides the technical support documents.

  15. Apps to improve diet, physical activity and sedentary behaviour in children and adolescents: a review of quality, features and behaviour change techniques.

    PubMed

    Schoeppe, Stephanie; Alley, Stephanie; Rebar, Amanda L; Hayman, Melanie; Bray, Nicola A; Van Lippevelde, Wendy; Gnam, Jens-Peter; Bachert, Philip; Direito, Artur; Vandelanotte, Corneel

    2017-06-24

    The number of commercial apps to improve health behaviours in children is growing rapidly. While this provides opportunities for promoting health, the content and quality of apps targeting children and adolescents is largely unexplored. This review systematically evaluated the content and quality of apps to improve diet, physical activity and sedentary behaviour in children and adolescents, and examined relationships of app quality ratings with number of app features and behaviour change techniques (BCTs) used. Systematic literature searches were conducted in iTunes and Google Play stores between May-November 2016. Apps were included if they targeted children or adolescents, focused on improving diet, physical activity and/or sedentary behaviour, had a user rating of at least 4+ based on at least 20 ratings, and were available in English. App inclusion, downloading and user-testing for quality assessment and content analysis were conducted independently by two reviewers. Spearman correlations were used to examine relationships between app quality, and number of technical app features and BCTs included. Twenty-five apps were included targeting diet (n = 12), physical activity (n = 18) and sedentary behaviour (n = 7). On a 5-point Mobile App Rating Scale (MARS), overall app quality was moderate (total MARS score: 3.6). Functionality was the highest scoring domain (mean: 4.1, SD: 0.6), followed by aesthetics (mean: 3.8, SD: 0.8), and lower scoring for engagement (mean: 3.6, SD: 0.7) and information quality (mean: 2.8, SD: 0.8). On average, 6 BCTs were identified per app (range: 1-14); the most frequently used BCTs were providing 'instructions' (n = 19), 'general encouragement' (n = 18), 'contingent rewards' (n = 17), and 'feedback on performance' (n = 13). App quality ratings correlated positively with numbers of technical app features (rho = 0.42, p < 0.05) and BCTs included (rho = 0.54, p < 0.01). Popular commercial apps to improve diet, physical activity and sedentary behaviour in children and adolescents had moderate quality overall, scored higher in terms of functionality. Most apps incorporated some BCTs and higher quality apps included more app features and BCTs. Future app development should identify factors that promote users' app engagement, be tailored to specific population groups, and be informed by health behaviour theories.

  16. Documentation of the runqual module for ADDAMS: Comparison of predicted runoff water quality with standards. Environmental effects of dredging. Technical notes

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Schroeder, P.R.; Gibson, A.C.; Dardeau, E.A.

    This technical note has a twofold purpose: to describe a technique for comparing the predicted quality of surface runoff from confined dredged material disposal areas with applicable water quality standards and to document a computer program called RUNQUAL, written for that purpose as a part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

  17. SUGAR: graphical user interface-based data refiner for high-throughput DNA sequencing.

    PubMed

    Sato, Yukuto; Kojima, Kaname; Nariai, Naoki; Yamaguchi-Kabata, Yumi; Kawai, Yosuke; Takahashi, Mamoru; Mimori, Takahiro; Nagasaki, Masao

    2014-08-08

    Next-generation sequencers (NGSs) have become one of the main tools for current biology. To obtain useful insights from the NGS data, it is essential to control low-quality portions of the data affected by technical errors such as air bubbles in sequencing fluidics. We develop a software SUGAR (subtile-based GUI-assisted refiner) which can handle ultra-high-throughput data with user-friendly graphical user interface (GUI) and interactive analysis capability. The SUGAR generates high-resolution quality heatmaps of the flowcell, enabling users to find possible signals of technical errors during the sequencing. The sequencing data generated from the error-affected regions of a flowcell can be selectively removed by automated analysis or GUI-assisted operations implemented in the SUGAR. The automated data-cleaning function based on sequence read quality (Phred) scores was applied to a public whole human genome sequencing data and we proved the overall mapping quality was improved. The detailed data evaluation and cleaning enabled by SUGAR would reduce technical problems in sequence read mapping, improving subsequent variant analysis that require high-quality sequence data and mapping results. Therefore, the software will be especially useful to control the quality of variant calls to the low population cells, e.g., cancers, in a sample with technical errors of sequencing procedures.

  18. The AGARD tip research agenda for Scientific and Technical Information (STI)

    NASA Technical Reports Server (NTRS)

    Blados, Walter R.

    1992-01-01

    The Research Agenda contains three themes: information management, provision of information, and access to information. Provision of information is further divided into two subordinate themes, dissemination and bibliographic control; access to information is also further divided into two subordinate themes, barriers and equity and networking. Each theme or sub-theme was examined from four possible aspects, namely, human resources, quality assurance, cost, and technology. It was concluded that, in fact, a theme or sub-theme need not contain all four aspects.

  19. Benefits of experience. Treating coronary artery disease.

    PubMed

    Hemenway, D; Sherman, H; Mudge, G H; Flatley, M; Lindsey, N M; Goldman, L

    1986-02-01

    The authors examined the issue of learning by doing in terms of both the cost and outcome of treating coronary artery disease at one hospital between 1977 and 1981. Over time, the quality of outcome improved for both medical and surgical patients. During this time of cost-plus reimbursement, there was less conclusive evidence of concurrent technical efficiency gains. These findings are consistent with the hypothesis that the benefits of experience can be substantial but they do not just happen: they require proper provider motivation.

  20. 77 FR 58871 - Agency Information Collection Activities: Proposed Collection; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-09-24

    ... action to submit an information collection request to the Office of Management and Budget (OMB) and... ensuring that their vendors meet applicable regulations and requirements, both technical and quality, in..., the NRC inspects vendors to evaluate their conformance with technical and quality requirements in part...

  1. 33 CFR 385.21 - Quality control.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... will be produced by a Project Delivery Team. The quality control plan shall be included in the Project... Corps of Engineers and the non-Federal sponsor shall establish a Technical Review Team to conduct.... The members of the Technical Review Team shall be independent of the Project Delivery Team and the...

  2. State “Technical Assistance Programs” for nursing home quality improvement: variations and potential implications

    PubMed Central

    Li, Yue; Spector, Williams D.; Glance, Laurent G.; Mukamel, Dana B.

    2013-01-01

    Context To improve nursing home quality, many states developed “Technical Assistance Programs” that provide on-site consultation and training for nursing facility staff. Methods We conducted a national survey on these state programs to collect data on program design, operations, financing, and perceived effectiveness. Results As of 2010, 17 states have developed such programs. Compared to existing state nursing home quality regulations, these programs represent a collaborative, rather than enforcement-oriented, approach to quality. However, existing programs vary substantially in key structural features such as staffing patterns, funding levels, and relationship with state survey and certification agencies. Perceived effectiveness by program officials on quality was high, although few states have performed formal evaluations. Perceived barriers to program effectiveness included lack of appropriate staff and funding, among others. Conclusion State “Technical Assistance Programs” for nursing homes varies in program design and perceived effectiveness. Future comparative evaluations are needed to inform evidence-based quality initiatives. PMID:23216345

  3. Does human resource management improve family planning service quality? Analysis from the Kenya Service Provision Assessment 2010.

    PubMed

    Thatte, Nandita; Choi, Yoonjoung

    2015-04-01

    Human resource (HR) management is a priority for health systems strengthening in developing countries, yet few studies have empirically examined associations with service quality. The purpose of this study was to assess the relationship between HR management and family planning (FP) service quality. Data came from the 2010 Kenya Service Provision Assessment, a nationally representative health facility assessment. In total, 912 FP consultations from 301 facilities were analysed. Four indices were created to measure quality on reproductive history taking, physical examination, sexually transmitted infections prevention and pill/injectable specific counselling. HR management variables included training in the past year, any and supportive (i.e. with feedback, technical updates and discussion) in-person supervision in the past 6 months and having a written job description. Multivariate linear regression analyses were conducted to estimate coefficients of HR management variables on each of the four quality indices, adjusting for background characteristics of clients, provider and facilities. The level of service quality ranged from 16 to 53 out of a maximum score of 100 across the indices. Fifty-two per cent of consultations were done by providers who received supportive in-person supervision in the previous 6 months. In 23% and 38% of consultations, the provider was trained in the past year and had a written job description, respectively. Multivariate analyses indicated that having a written job description was associated with higher service quality in history taking, physical examination and the pill/injectable specific counselling. Other HR management variables were not significantly associated with service quality. Having a written job description was significantly associated with higher service quality and may be a useful tool for strengthening management practices. The details of such job descriptions and the quality of other management indicators should be explored to better understand the relationship between HR management and FP service quality. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2014; all rights reserved.

  4. Establishing Mandatory Academic Degree Guidance for AFROTC (Air Force Reserve Officer Training Corps) Rated Officer Accessions

    DTIC Science & Technology

    1984-04-01

    Scientific- Architecture 4% 4% Technical Computer Sci 38% 37% Math 40% 40% Meteorology 6% 6% Physics 12 % 13% Nontechnical Quality Freeflow 2/ Quality...Architecture 4 Computer Sci 48 43 40 Math 30 35 38 Meteorology 6 6 6 Physics 12 12 12 Engineer Electrical 40% 50% 50% Aero Group 25 25 30 Other / 35 25 20...with Technical Degrees by Major Weapon System. . . 12 FIGURE 4 - Pilots with Technical Degrees by Category . . . . . . 13 FIGURE 5 - Regression

  5. Technical Features of Curriculum-Based Measurement in Writing: A Literature Review

    ERIC Educational Resources Information Center

    McMaster, Kristen; Espin, Christine

    2007-01-01

    This article reviews research examining technical features of curriculum-based measurement (CBM) in written expression. Twenty-eight technical reports and published articles are included in this review. Studies examining the development and technical adequacy of measures of written expression are summarized, beginning with research conducted at…

  6. [Investigation on current situation of malaria blood examinations in township-level hospitals of Nantong City].

    PubMed

    Gui-Sheng, Ding; Cai-Qun, Cao; Ping, Miao; Mei-Fang, Gu; Xiao-Bin, Cao

    2016-11-18

    To understand the quality of malaria blood examinations in township-level hospitals, so as to provide the evidence for continuing the malaria blood examinations in the stage of post-malaria elimination. A total of 64 township hospitals were investigated and 640 negative malaria blood slides were scored individually according to 10 indicators in "Malaria Elimination Technical Scheme" in 2013 and 2014. The single and multiple indicators were calculated, and the work of blood examinations and situation of technicians were investigated. The data of malaria blood examinations and patient discovery in township hospitals of Nantong City were collected and analyzed during the period of 2011-2014. For the single indicator, 29.5% of the thick blood films did not reach the standard, and 35.8% of thin blood films did not reach the standard. For the multiple indicators, blood slides with more than 4 indicators below the standard (poor quality) accounted for 32.5%. From malaria blood examinations and malaria situation, the number of slides was 194 635 during the period of 2011-2014, and there were no local vivax malaria casesin 4 consecutive years from 2011 to 2014, and local malaria has been effectively controlled in Nantong City. For health facilities where malaria patients initially presented, the township and village level accounted for 16.3%, and county and higher level accounted for 83.7%. The quality of malaria blood examinations in township level hospitals of Nantong City is not high and the microscopic examination has a relatively low efficiency in the discovery of malaria cases. A new model for malaria blood examinations needs to be further explored.

  7. Expansion Policy of Secondary Technical Education as a Correlate to the Acquisition of Basic Technical Skills by Students in Cameroon

    ERIC Educational Resources Information Center

    Efande, Lyonga John

    2015-01-01

    This study aims at investigating the relationship between the expansion of secondary Technical Education on the acquisition of technical skills by students. Technical Vocational Education and Training (TVET) has been expanding quantitatively yearly without paying enough attention to its adverse effect on quality and the acquisition of the…

  8. Do Technical Aids for Patient Handling Prevent Musculoskeletal Complaints in Health Care Workers?—A Systematic Review of Intervention Studies

    PubMed Central

    Hegewald, Janice; Berge, Wera; Heinrich, Philipp; Staudte, Ronny; Freiberg, Alice; Scharfe, Julia; Girbig, Maria; Nienhaus, Albert; Seidler, Andreas

    2018-01-01

    The physical load ensuing from the repositioning and moving of patients puts health care workers at risk of musculoskeletal complaints. Technical equipment developed to aid with patient handling should reduce physical strain and workload; however, the efficacy of these aids in preventing musculoskeletal disorders and complaints is still unclear. A systematic review of controlled intervention studies was conducted to examine if the risk of musculoskeletal complaints and disorders is reduced by technical patient handling equipment. MEDLINE®/PubMed®, EMBASE®, Allied and Complementary Medicine Database (AMED), and Cumulative Index of Nursing and Allied Health Literature (CINAHL®) were searched using terms for nursing, caregiving, technical aids, musculoskeletal injuries, and complaints. Randomized controlled trials and controlled before-after studies of interventions including technical patient handling equipment were included. The titles and abstracts of 9554 publications and 97 full-texts were screened by two reviewers. The qualitative synthesis included one randomized controlled trial (RCT) and ten controlled before-after studies. A meta-analysis of four studies resulted in a pooled risk ratio for musculoskeletal injury claims (post-intervention) of 0.78 (95% confidence interval 0.68–0.90). Overall, the methodological quality of the studies was poor and the results often based on administrative injury claim data, introducing potential selection bias. Interventions with technical patient handling aids appear to prevent musculoskeletal complaints, but the certainty of the evidence according to GRADE approach ranged from low to very low. PMID:29522440

  9. Do Technical Aids for Patient Handling Prevent Musculoskeletal Complaints in Health Care Workers?-A Systematic Review of Intervention Studies.

    PubMed

    Hegewald, Janice; Berge, Wera; Heinrich, Philipp; Staudte, Ronny; Freiberg, Alice; Scharfe, Julia; Girbig, Maria; Nienhaus, Albert; Seidler, Andreas

    2018-03-09

    The physical load ensuing from the repositioning and moving of patients puts health care workers at risk of musculoskeletal complaints. Technical equipment developed to aid with patient handling should reduce physical strain and workload; however, the efficacy of these aids in preventing musculoskeletal disorders and complaints is still unclear. A systematic review of controlled intervention studies was conducted to examine if the risk of musculoskeletal complaints and disorders is reduced by technical patient handling equipment. MEDLINE ® /PubMed ® , EMBASE ® , Allied and Complementary Medicine Database (AMED), and Cumulative Index of Nursing and Allied Health Literature (CINAHL ® ) were searched using terms for nursing, caregiving, technical aids, musculoskeletal injuries, and complaints. Randomized controlled trials and controlled before-after studies of interventions including technical patient handling equipment were included. The titles and abstracts of 9554 publications and 97 full-texts were screened by two reviewers. The qualitative synthesis included one randomized controlled trial (RCT) and ten controlled before-after studies. A meta-analysis of four studies resulted in a pooled risk ratio for musculoskeletal injury claims (post-intervention) of 0.78 (95% confidence interval 0.68-0.90). Overall, the methodological quality of the studies was poor and the results often based on administrative injury claim data, introducing potential selection bias. Interventions with technical patient handling aids appear to prevent musculoskeletal complaints, but the certainty of the evidence according to GRADE approach ranged from low to very low.

  10. RADIOPROTECTION CAMPAIGN AND CARD: EDUCATIONAL STRATEGIES THAT REDUCE CHILDREN'S EXCESSIVE EXPOSURE TO RADIOLOGICAL EXAMS.

    PubMed

    Bernardo, Mônica Oliveira; Almeida, Fernando Antonio de; Morgado, Flavio

    2017-01-01

    To analyze the results of an initiative aimed at improving the reasonable use of radiological examinations, ensuring their technical quality, implementing a radioprotection campaign that includes training of the professional team, and introducing the radioprotection card for children under 12 years old as a tool for parents and doctors to control children's exposure to radiation. The study was held in a health care insurance system covering 140,000 people. A radioprotection campaign was implemented according to Image Gently • protocols, ensuring the lowest dose of radiation and the quality of examinations, and the radioprotection card was implemented. To assess the effectiveness of these actions, the number of radiological examinations performed at the pediatric emergency room in a period of one year preceding the campaign was compared with the number of radiological examinations performed one year after the campaign. The campaign was well accepted by all professionals, families, and patients involved. In the year following the implementation of radioprotection strategies, there was a 22% reduction of radiological examinations performed at the pediatric emergency room. There was also a 29% reduction in the request of two or more radiological examinations for the same child or examinations with two or more incidences. The campaign and the radioprotection card for children under 12 years old proved to be feasible strategies and correlated with a reduction in radiological examinations requested and performed at the pediatric emergency room.

  11. Factors influencing private health providers' technical quality of care for acute respiratory infections among under-five children in rural West Bengal, India.

    PubMed

    Chakraborty, Sarbani; Frick, Kevin

    2002-11-01

    In many developing countries, private health practitioners provide a significant portion of curative care for diseases which are of public health importance. Currently, health sector reform efforts in these countries are fostering increased participation of private providers in the delivery of health services, including those of public health importance. Guaranteeing good technical quality of care is critical to the process. However, little is known about private providers' technical quality of care (disease management practices) and the factors influencing these services. The purpose of this study was to contribute information on this topic. The study was conducted among private providers in rural West Bengal, India and focused on providers' disease management practices for acute respiratory infections (ARI) among under-five children. World Health Organization (WHO) guidelines for ARI case management were used as the expected standard of care. Observations of patient-provider encounters and interviews with the providers and mothers were the main sources of data. The study found that private health providers in rural West Bengal have inadequate technical quality of care. The problem was related both to low levels of performance (limited potential) and inconsistency in performance (within-provider variation). Limited potential for good technical quality for ARI among the providers was related to lack of knowledge (technical incompetence). One of the important factors influencing within-provider variation was patient load. Since rural private providers operate on a fee-for-service payment system, there are incentives related to seeing many patients. The study concluded that to bring about sustainable improvements in private providers' ARI disease management practices, training programs and interventions that improved compliance were necessary.

  12. From Industry to Teaching: The Quality Instruction Program at Hocking Technical College.

    ERIC Educational Resources Information Center

    Moran, Ralph; And Others

    This presentation on Hocking Technical College's (HTC's) Quality Instruction Program (QIP) provides a program description and comments from three HTC faculty members who have been involved in the program in various ways. Recognizing that many faculty members are hired on the basis of their industrial credentials rather than their teaching…

  13. Water Quality Criteria, Report of the National Technical Advisory Committee to the Secretary of the Interior.

    ERIC Educational Resources Information Center

    Department of the Interior, Washington, DC. Federal Water Pollution Control Administration.

    Contained are reports of five subcommittees of the National Technical Advisory Committee on Water Quality Criteria. Subcommittees were recreation and aesthetics; public water supplies; fish, other aquatic life, and wildlife; agricultural uses; and industrial water supplies. Each committee report contains discussion of the problem area, criteria…

  14. Continuous Quality Improvement in a University Setting: The Case of the Department of Vocational and Technical Education at the University of Minnesota.

    ERIC Educational Resources Information Center

    Copa, George H.

    1993-01-01

    Discusses the application of continuous quality improvement principles in the Department of Vocational and Technical Education at the University of Minnesota. Reviews the processes that the department incorporated to implement this program and lists future steps and categories of action. (Author)

  15. Development of German-English Machine Translation System. Final Technical Report.

    ERIC Educational Resources Information Center

    Lehmann, Winfred P.; Stachowitz, Rolf A.

    This report describes work on a pilot system for a fully automatic, high-quality translation of German scientific and technical text into English and gives the results of an experiment designed to show the system's capability to produce quality mechanical translation. The areas considered were: (1) grammar formalism, mainly involving the addition…

  16. Comparing Panelists' Understanding of Standard Setting across Multiple Levels of an Alternate Science Assessment

    ERIC Educational Resources Information Center

    Hansen, Mary A.; Lyon, Steven R.; Heh, Peter; Zigmond, Naomi

    2013-01-01

    Large-scale assessment programs, including alternate assessments based on alternate achievement standards (AA-AAS), must provide evidence of technical quality and validity. This study provides information about the technical quality of one AA-AAS by evaluating the standard setting for the science component. The assessment was designed to have…

  17. 76 FR 43175 - Approval of Air Quality Implementation Plans; Indiana and Ohio; Disapproval of Interstate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-20

    ... impact. EPA stated that the state's conclusion should be supported by an adequate technical analysis. EPA... by an adequate technical analysis. IDEM did not provide a technical analysis in its submittal, but... technical analysis and justification necessary to make that demonstration. Indiana did not provide any...

  18. Predicting Influential Factors of Secondary Career and Technical Education Teachers' Intent to Stay in the Profession

    ERIC Educational Resources Information Center

    Dainty, Julie D.

    2012-01-01

    Retaining highly qualified career and technical education teachers is important in maintaining and growing quality secondary career and technical education programs. Therefore, the purpose of this study was to identify factors contributing to teacher retention specifically in the area of career and technical education (CTE) and determine…

  19. Visuospatial and Technical Ability in the Selection and Assessment of Higher Surgical Trainees in the London Deanery

    PubMed Central

    Tansley, P; Kakar, S; Withey, S; Butler, P

    2007-01-01

    INTRODUCTION Despite awareness of the limitations of current selection and competency assessments, there is little consensus and alternatives have not been readily accepted. Essential surgical skills include visuospatial and technical ability. The aim of this study was to survey current methods of higher surgical trainee selection and assessment. We suggest ways to improve the process. MATERIALS AND METHODS Nine surgical training programmes in the London deanery were surveyed through questionnaires to programme directors, existing trainees and examination of deanery publications. RESULTS Testing of visuospatial and technical ability was piloted at selection only in a single general surgical department. Practical skills were assessed in 3/9 (33%) specialties (ENT, plastic and general surgery). Once selected, no specialty tested visuospatial and technical ability. Practical skills were tested in only 1/9 (11%) specialties (plastic surgery). The remaining 8/9 (89%) were ‘assessed’ by interview. CONCLUSIONS Lack of visuospatial and technical ability assessment was identified at selection and during higher surgical training. Airlines have long recognised early identification of these qualities as critical for efficient training. There is a need for more objective methods in this area prior to selection as time to assess surgical trainees during long apprenticeships is no longer available. We advocate a suitably validated competency-based model during and at completion of training. PMID:18201473

  20. Introducing active learning pedagogy into a technical and vocational education and training academy in Kurdistan, Iraq

    NASA Astrophysics Data System (ADS)

    Dickson, Martina; Ladefoged, Svend Erik

    2017-10-01

    This article focuses on a teaching methodology project which investigated issues of teaching quality at a technical and vocational education and training (TVET) academy in Kurdistan, Northern Iraq. The academy was established in 2012 to provide unemployed youth with TVET, particularly workplace-relevant training. A needs analysis showed that the academy's teachers were mainly skilled in technical content areas rather than in pedagogy. Perhaps as a result, predominantly teacher-centred approaches to teaching were observed. However, teaching and learning in TVET, by its very definition, must consider active learning and practical training as core to its vocational purpose. Moreover, technical and pedagogical skills are intrinsically linked, since a teacher cannot effectively pass on technical skills without the necessary pedagogical skills to do so. It is on this premise that the authors of this article based their project, which was designed for the purpose of upgrading the teachers' pedagogical skills to incorporate more active learning strategies and practical work. Comparison of observation logs and feedback sessions at the conclusion of their project provided evidence that whilst some of the teachers' pedagogical skills had shifted towards using more dynamic teaching strategies, interviews strongly indicated that there was also some reluctance to incorporate active learning. In their conclusion, the authors suggest that the insights gained from this project could be further empirically examined in a larger, multi-institutional study.

  1. Failure study of helium-cooled tungsten divertor plasma-facing units tested at DEMO relevant steady-state heat loads

    NASA Astrophysics Data System (ADS)

    Ritz, G.; Hirai, T.; Norajitra, P.; Reiser, J.; Giniyatulin, R.; Makhankov, A.; Mazul, I.; Pintsuk, G.; Linke, J.

    2009-12-01

    Tungsten was selected as armor material for the helium-cooled divertor in future DEMO-type fusion reactors and fusion power plants. After realizing the design and testing of them under cyclic thermal loads of up to ~14 MW m-2, the tungsten divertor plasma-facing units were examined by metallography; they revealed failures such as cracks at the thermal loaded and as-machined surfaces, as well as degradation of the brazing layers. Furthermore, in order to optimize the machining processes, the quality of tungsten surfaces prepared by turning, milling and using a diamond cutting wheel were examined. This paper presents a metallographic examination of the tungsten plasma-facing units as well as technical studies and the characterization on machining of tungsten and alternative brazing joints.

  2. Socio-economic effect on socially-deprived communities of developing drinking water quality problems in arid and semi-arid area of central Rajasthan

    NASA Astrophysics Data System (ADS)

    Husain, I.; Husain, J.; Arif, M.

    2014-09-01

    Rajasthan is well known for its Great Thar desert. Central Rajasthan has an arid to semi-arid environment. The area faces either scarcity of water or poor quality of drinking water. In some areas water is transported 2 km or more, which uses time, energy and money. Rich people have their own sources, which is restricted for use by others. Such conditions are affecting socially-deprived communities, both socially and economically. Groundwater is a major source of drinking water due to the unavailability of surface water. There is a lack of groundwater quality knowledge in the community and the data available is hard to understand by consumers. The CCME Water Quality Index is a tool to simplify the water quality report by rating the water on quality standards. It provides meaningful summaries of overall water quality and trends, which is accessible to non-technical lay people. In the present study the objective is to examine the groundwater quality of six districts (Ajmer, Bhilwara, Pali, Rajasamand, Nagaur and Jodhpur), centrally located in Rajasthan, with arid and semi-arid conditions. CCME WQI is also evaluated to produce quality data in a form to be understood by the community. A total of 4369 groundwater sources in 1680 villages from six districts (76 546 km2) were collected and examined. Results are outlined in the Bureau of Indian Standards (BIS: 10500, 2012) and 2952 sources are unsafe for drinking. According to CCME WQI groundwater of 93 villages is poor, 343 villages are marginal, and 369 villages are fair in quality. Toxicological studies of unsafe drinking water and their remedial measures are also discussed. A tentative correlation between prevailing water-borne diseases and quality parameter has also been shown

  3. Materials Testing and Quality Control Soils, 3-28. Military Curriculum Materials for Vocational and Technical Education.

    ERIC Educational Resources Information Center

    Ohio State Univ., Columbus. National Center for Research in Vocational Education.

    This instructional package on material testing and quality control of soils has been adapted from military curriculum materials for use in technical and vocational education programs. This short course presents basic information on soils as well as exploration, field identification, and laboratory procedures that will enable students completing…

  4. Health care quality: from data to accountability.

    PubMed

    Darby, M

    1998-08-01

    The many audiences for information about the quality of health care have different and sometimes conflicting interests and priorities. This is reflected in the diversity of current efforts to use health care data to identify, measure, and demonstrate quality. The author surveys three of these approaches in depth: (1) the professional approach, which relies on the actions of private-sector accreditation groups, trade associations and health plans, hospitals, and other providers to assure quality; (2) the market-driven approach, which relies on the use of quality data by health care purchasers and consumers in choosing plans and providers; and (3) the public-sector approach, which relies on the regulatory, oversight, and purchasing actions of government at the federal, state, and local levels to assure quality. The author concludes that efforts to measure and report the quality of health care invariably confront a variety of technical and political issues. Several observers maintain that it is more important for participants in quality issues to reach consensus on the issues than to reach technical perfection in the way the data are handled. Important obstacles in the technical realm include inadequate investment in sufficiently sophisticated and compatible information systems and the fact that where such systems are in place, they generally cannot be linked. But efforts, both technical and legal, are under way to overcome these obstacles. Even so, some of the issues of health care quality will remain moving targets because of constant changes in the health care environment and in technology. The author closes with the hope that the various actors within the health care industry may coordinate their efforts in dealing with these issues.

  5. Molecular imaging of malignant tumor metabolism: whole-body image fusion of DWI/CT vs. PET/CT.

    PubMed

    Reiner, Caecilia S; Fischer, Michael A; Hany, Thomas; Stolzmann, Paul; Nanz, Daniel; Donati, Olivio F; Weishaupt, Dominik; von Schulthess, Gustav K; Scheffel, Hans

    2011-08-01

    To prospectively investigate the technical feasibility and performance of image fusion for whole-body diffusion-weighted imaging (wbDWI) and computed tomography (CT) to detect metastases using hybrid positron emission tomography/computed tomography (PET/CT) as reference standard. Fifty-two patients (60 ± 14 years; 18 women) with different malignant tumor disease examined by PET/CT for clinical reasons consented to undergo additional wbDWI at 1.5 Tesla. WbDWI was performed using a diffusion-weighted single-shot echo-planar imaging during free breathing. Images at b = 0 s/mm(2) and b = 700 s/mm(2) were acquired and apparent diffusion coefficient (ADC) maps were generated. Image fusion of wbDWI and CT (from PET/CT scan) was performed yielding for wbDWI/CT fused image data. One radiologist rated the success of image fusion and diagnostic image quality. The presence or absence of metastases on wbDWI/CT fused images was evaluated together with the separate wbDWI and CT images by two different, independent radiologists blinded to results from PET/CT. Detection rate and positive predictive values for diagnosing metastases was calculated. PET/CT examinations were used as reference standard. PET/CT identified 305 malignant lesions in 39 of 52 (75%) patients. WbDWI/CT image fusion was technically successful and yielded diagnostic image quality in 73% and 92% of patients, respectively. Interobserver agreement for the evaluation of wbDWI/CT images was κ = 0.78. WbDWI/CT identified 270 metastases in 43 of 52 (83%) patients. Overall detection rate and positive predictive value of wbDWI/CT was 89% (95% CI, 0.85-0.92) and 94% (95% CI, 0.92-0.97), respectively. WbDWI/CT image fusion is technically feasible in a clinical setting and allows the diagnostic assessment of metastatic tumor disease detecting nine of 10 lesions as compared with PET/CT. Copyright © 2011 AUR. Published by Elsevier Inc. All rights reserved.

  6. Relationship between basic protective health behaviours and health related quality of life in Greek urban hospital employees.

    PubMed

    Tountas, Yannis; Manios, Yannis; Dimitrakaki, Christine; Tzavara, Chara

    2007-01-01

    The study aimed to explore the association between the presence of several protective health behaviors and physical and mental wellbeing/functioning among healthy hospital employees in Greece. A randomly selected representative sample of 395 employees working in seven hospitals, both public and private, within the wider region of Athens participated in the study. Participants were assigned to the following professional categories: administrative, auxiliary and technical personnel, medical doctors and nurses. Four basic protective health behaviors were examined: following the Mediterranean diet, exercising, no smoking and moderate alcohol drinking. Employees' health related quality of life was assessed with the self-administered SF-36 generic health status measure. Technical and administrative hospital personnel reported more healthy behaviors than medical and auxiliary personnel. There was an increased likelihood of scoring higher in almost all SF-36 Physical health subscales in the accumulation of the above four protective heath behaviors. In terms of mental health, even the presence of two or more protective health behaviors significantly increase the score on most SF-36 Mental health subscales. Results indicate that the protective role of basic health behaviors extends beyond physical health to mental wellbeing.

  7. Citizen science: a new direction in canine behavior research.

    PubMed

    Hecht, Julie; Spicer Rice, Eleanor

    2015-01-01

    Researchers increasingly rely on members of the public to contribute to scientific projects-from collecting or identifying, to analyzing and disseminating data. The "citizen science" model proves useful to many thematically distinctive fields, like ornithology, astronomy, and phenology. The recent formalization of citizen science projects addresses technical issues related to volunteer participation--like data quality--so that citizen scientists can make longstanding, meaningful contributions to scientific projects. Since the late 1990s, canine science research has relied with greater frequency on the participation of the general public, particularly dog owners. These researchers do not typically consider the methods and technical issues that those conducting citizen science projects embrace and continue to investigate. As more canine science studies rely on public input, an in-depth knowledge of the benefits and challenges of citizen science can help produce relevant, high-quality data while increasing the general public's understanding of canine behavior and cognition as well as the scientific process. We examine the benefits and challenges of current citizen science models in an effort to enhance canine citizen science project preparation, execution, and dissemination. This article is part of a Special Issue entitled: Canine Behavior. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Commentary: Sexism, Sex Stereotyping, and the Technical Writer.

    ERIC Educational Resources Information Center

    Veiga, Nancy E.

    1989-01-01

    Discusses the impact of possible sex-based differences in communication styles on the technical writer's job. Argues that technical writers can choose to use both male and female communication styles to acknowledge multiple audiences and to improve the quality of their documents. (KEH)

  9. Vocational and Technical Education Performance Standards and Competencies.

    ERIC Educational Resources Information Center

    Connecticut State Board of Education, Hartford.

    These Connecticut vocational and technical performance standards and competencies are a guide for overall quality attainment in these seven vocational and technical program areas: agricultural science technology education; business and finance technology education; cooperative work education; family and consumer sciences education; marketing…

  10. PIAAC Technical Standards and Guidelines

    ERIC Educational Resources Information Center

    OECD Publishing, 2014

    2014-01-01

    The Programme for International Assessment of Adult Competencies (PIAAC) will establish technical standards and guidelines to ensure that the survey design and implementation processes of PIAAC yield high-quality and internationally comparable data. This document provides a revised version of the technical standards and guidelines originally…

  11. The organization of multidisciplinary care teams: modeling internal and external influences on cancer care quality.

    PubMed

    Fennell, Mary L; Das, Irene Prabhu; Clauser, Steven; Petrelli, Nicholas; Salner, Andrew

    2010-01-01

    Quality cancer treatment depends upon careful coordination between multiple treatments and treatment providers, the exchange of technical information, and regular communication between all providers and physician disciplines involved in treatment. This article will examine a particular type of organizational structure purported to regularize and streamline the communication between multiple specialists and support services involved in cancer treatment: the multidisciplinary treatment care (MDC) team. We present a targeted review of what is known about various types of MDC team structures and their impact on the quality of treatment care, and we outline a conceptual model of the connections between team context, structure, process, and performance and their subsequent effects on cancer treatment care processes and patient outcomes. Finally, we will discuss future research directions to understand how MDC teams improve patient outcomes and how characteristics of team structure, culture, leadership, and context (organizational setting and local environment) contribute to optimal multidisciplinary cancer care.

  12. Stormwater runoff water quality evaluation and management program for hazardous chemical sites: Development issues

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lee, G.F.; Jones-Lee, A.

    1998-12-31

    The deficiencies in the typical stormwater runoff water quality monitoring from hazardous chemical sites and an alternative approach (Evaluation Monitoring) for monitoring that shifts the monitoring program from periodic sampling and analysis of stormwater runoff for a suite of chemical parameters to examining the receiving waters to determine what, if any, water quality use impairments are occurring due to the runoff-associated constituents is presented in this paper. Rather than measuring potentially toxic constituents such as heavy metals in runoff, the monitoring program determines whether there is aquatic life toxicity in the receiving waters associated with the stormwater runoff. If toxicitymore » is found, its cause is determined and the source of the constituents causing the toxicity is identified through forensic analysis. Based on this information, site-specific, technically valid stormwater runoff management programs can be developed that will control real water quality impacts caused by stormwater runoff-associated constituents.« less

  13. Examining the Quality of Rectal Cancer Operative Reports in Teaching Institutions: Is There an Opportunity for Resident Education?

    PubMed

    Parrish, Aaron B; Sanaiha, Yas; Petrie, Beverley A; Russell, Marcia M; Chen, Formosa

    2016-10-01

    The American Society of Colon and Rectal Surgeons rectal cancer checklist describes a set of best practices for rectal cancer surgery. The objective of this study was to assess the quality of operative reports for rectal cancer surgery based on the intraoperative American Society of Colon and Rectal Surgeons checklist items. Patients undergoing rectal cancer surgery at two public teaching hospitals from 2009 to 2015 were included. A total of 12 intraoperative checklist items were assessed. One hundred and fifty-eight operative reports were reviewed. Overall adherence to checklist items was 55 per cent, and was significantly higher in attending versus resident dictated reports (67% vs 51%, P < 0.01). Senior residents had significantly higher adherence to checklist items than junior residents (55% vs 44%, P < 0.01). However, overall adherence to rectal cancer checklist items was low. This represents an opportunity to improve the quality of operative documentation in rectal cancer surgery, which could also impact the technical quality of the operation itself.

  14. Two underestimated threats in food transportation: mould and acceleration

    PubMed Central

    Janssen, S.; Pankoke, I.; Klus, K.; Schmitt, K.; Stephan, U.; Wöllenstein, J.

    2014-01-01

    Two important parameters are often neglected in the monitoring of perishable goods during transport: mould contamination of fresh food and the influence of acceleration or vibration on the quality of a product. We assert the claim that it is necessary to focus research on these two topics in the context of intelligent logistics in this opinion paper. Further, the technical possibilities for future measurement systems are discussed. By measuring taste deviations, we verified the effect on the quality of beer at different vibration frequencies. The practical importance is shown by examining transport routes and market shares. The general feasibility of a mobile mould detection system is established by examining the measurement resolution of semiconductor sensors for mould-related gases. Furthermore, as an alternative solution, we present a concept for a miniaturized and automated culture-medium-based system. Although there is a lack of related research to date, new efforts can make a vital contribution to the reduction of losses in the logistic chains for several products. PMID:24797139

  15. Two underestimated threats in food transportation: mould and acceleration.

    PubMed

    Janssen, S; Pankoke, I; Klus, K; Schmitt, K; Stephan, U; Wöllenstein, J

    2014-06-13

    Two important parameters are often neglected in the monitoring of perishable goods during transport: mould contamination of fresh food and the influence of acceleration or vibration on the quality of a product. We assert the claim that it is necessary to focus research on these two topics in the context of intelligent logistics in this opinion paper. Further, the technical possibilities for future measurement systems are discussed. By measuring taste deviations, we verified the effect on the quality of beer at different vibration frequencies. The practical importance is shown by examining transport routes and market shares. The general feasibility of a mobile mould detection system is established by examining the measurement resolution of semiconductor sensors for mould-related gases. Furthermore, as an alternative solution, we present a concept for a miniaturized and automated culture-medium-based system. Although there is a lack of related research to date, new efforts can make a vital contribution to the reduction of losses in the logistic chains for several products.

  16. Further Validation of the Pathways Housing First Fidelity Scale.

    PubMed

    Goering, Paula; Veldhuizen, Scott; Nelson, Geoffrey B; Stefancic, Ana; Tsemberis, Sam; Adair, Carol E; Distasio, Jino; Aubry, Tim; Stergiopoulos, Vicky; Streiner, David L

    2016-01-01

    This study examined whether Housing First fidelity ratings correspond to program operation descriptions from administrative data and predict client outcomes. A multisite, randomized controlled trial (At Home/Chez Soi) in five Canadian cities included two assessments of 12 programs over two years. Outcomes for 1,158 clients were measured every six months. Associations between fidelity ratings and administrative data (Spearman correlations) and participant outcomes (mixed-effects modeling) were examined. Fidelity ratings were generally good (mean ± SD=136.6 ± 10.3 out of a possible range of 38-152; 87% of maximum value). Fidelity was significantly associated with three of four measures of program operation, with correlations between .55 and .60. Greater program fidelity was associated with improvement in housing stability, community functioning, and quality of life. Variation in program fidelity was associated with operations and outcomes, supporting scale validity and intervention effectiveness. These findings reinforced the value of using fidelity monitoring to conduct quality assurance and technical assistance activities.

  17. Spatial abilities and technical skills performance in health care: a systematic review.

    PubMed

    Langlois, Jean; Bellemare, Christian; Toulouse, Josée; Wells, George A

    2015-11-01

    The aim of this study was to conduct a systematic review and meta-analysis of the relationship between spatial abilities and technical skills performance in health care in beginners and to compare this relationship with those in intermediate and autonomous learners. Search criteria included 'spatial abilities' and 'technical skills'. Keywords related to these criteria were defined. A literature search was conducted to 20 December, 2013 in Scopus (including MEDLINE) and in several databases on EBSCOhost platforms (CINAHL Plus with Full Text, ERIC, Education Source and PsycINFO). Citations were obtained and reviewed by two independent reviewers. Articles related to retained citations were reviewed and a final list of eligible articles was determined. Articles were assessed for quality using the Scottish Intercollegiate Guidelines Network-50 assessment instrument. Data were extracted from articles in a systematic way. Correlations between spatial abilities test scores and technical skills performance were identified. A series of 8289 citations was obtained. Eighty articles were retained and fully reviewed, yielding 36 eligible articles. The systematic review found a tendency for spatial abilities to be negatively correlated with the duration of technical skills and positively correlated with the quality of technical skills performance in beginners and intermediate learners. Pooled correlations of studies were -0.46 (p = 0.03) and -0.38 (95% confidence interval [CI] -0.53 to -0.21) for duration and 0.33 (95% CI 0.20-0.44) and 0.41 (95% CI 0.26-0.54) for quality of technical skills performance in beginners and intermediate learners, respectively. However, correlations between spatial abilities test scores and technical skills performance were not statistically significant in autonomous learners. Spatial abilities are an important factor to consider in selecting and training individuals in technical skills in health care. © 2015 John Wiley & Sons Ltd.

  18. Assays for Qualification and Quality Stratification of Clinical Biospecimens Used in Research: A Technical Report from the ISBER Biospecimen Science Working Group.

    PubMed

    Betsou, Fay; Bulla, Alexandre; Cho, Sang Yun; Clements, Judith; Chuaqui, Rodrigo; Coppola, Domenico; De Souza, Yvonne; De Wilde, Annemieke; Grizzle, William; Guadagni, Fiorella; Gunter, Elaine; Heil, Stacey; Hodgkinson, Verity; Kessler, Joseph; Kiehntopf, Michael; Kim, Hee Sung; Koppandi, Iren; Shea, Katheryn; Singh, Rajeev; Sobel, Marc; Somiari, Stella; Spyropoulos, Demetri; Stone, Mars; Tybring, Gunnel; Valyi-Nagy, Klara; Van den Eynden, Gert; Wadhwa, Lalita

    2016-10-01

    This technical report presents quality control (QC) assays that can be performed in order to qualify clinical biospecimens that have been biobanked for use in research. Some QC assays are specific to a disease area. Some QC assays are specific to a particular downstream analytical platform. When such a qualification is not possible, QC assays are presented that can be performed to stratify clinical biospecimens according to their biomolecular quality.

  19. Assays for Qualification and Quality Stratification of Clinical Biospecimens Used in Research: A Technical Report from the ISBER Biospecimen Science Working Group

    PubMed Central

    Bulla, Alexandre; Cho, Sang Yun; Clements, Judith; Chuaqui, Rodrigo; Coppola, Domenico; De Souza, Yvonne; De Wilde, Annemieke; Grizzle, William; Guadagni, Fiorella; Gunter, Elaine; Heil, Stacey; Hodgkinson, Verity; Kessler, Joseph; Kiehntopf, Michael; Kim, Hee Sung; Koppandi, Iren; Shea, Katheryn; Singh, Rajeev; Sobel, Marc; Somiari, Stella; Spyropoulos, Demetri; Stone, Mars; Tybring, Gunnel; Valyi-Nagy, Klara; Van den Eynden, Gert; Wadhwa, Lalita

    2016-01-01

    This technical report presents quality control (QC) assays that can be performed in order to qualify clinical biospecimens that have been biobanked for use in research. Some QC assays are specific to a disease area. Some QC assays are specific to a particular downstream analytical platform. When such a qualification is not possible, QC assays are presented that can be performed to stratify clinical biospecimens according to their biomolecular quality. PMID:27046294

  20. Assessment of technical and nontechnical skills in surgical residents.

    PubMed

    Ponton-Carss, Alicia; Kortbeek, John B; Ma, Irene W Y

    2016-11-01

    Surgical competence encompasses both technical and nontechnical skills. This study seeks to evaluate the validity evidence for a comprehensive surgical skills examination and to examine the relationship between technical and nontechnical skills. Six examination stations assessing both technical and nontechnical skills, conducted yearly for surgical trainees (n = 120) between 2010 and 2014 are included. The assessment tools demonstrated acceptable internal consistency. Interstation reliability for technical skills was low (alpha = .39). Interstation reliability for the nontechnical skills was lower (alpha range -.05 to .31). Nontechnical skills domains were strongly correlated, ranging from r = .65, P < .001 to .86, P < .001. The associations between nontechnical and technical skills were inconsistent, ranging from poor (r = -.06; P = .54) to moderate (r = .45; P < .001). Multiple samplings of integrated technical and nontechnical skills are necessary to assess overall surgical competency. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Prevalence of technical errors and periapical lesions in a sample of endodontically treated teeth: a CBCT analysis.

    PubMed

    Nascimento, Eduarda Helena Leandro; Gaêta-Araujo, Hugo; Andrade, Maria Fernanda Silva; Freitas, Deborah Queiroz

    2018-01-21

    The aims of this study are to identify the most frequent technical errors in endodontically treated teeth and to determine which root canals were most often associated with those errors, as well as to relate endodontic technical errors and the presence of coronal restorations with periapical status by means of cone-beam computed tomography images. Six hundred eighteen endodontically treated teeth (1146 root canals) were evaluated for the quality of their endodontic treatment and for the presence of coronal restorations and periapical lesions. Each root canal was classified according to dental groups, and the endodontic technical errors were recorded. Chi-square's test and descriptive analyses were performed. Six hundred eighty root canals (59.3%) had periapical lesions. Maxillary molars and anterior teeth showed higher prevalence of periapical lesions (p < 0.05). Endodontic treatment quality and coronal restoration were associated with periapical status (p < 0.05). Underfilling was the most frequent technical error in all root canals, except for the second mesiobuccal root canal of maxillary molars and the distobuccal root canal of mandibular molars, which were non-filled in 78.4 and 30% of the cases, respectively. There is a high prevalence of apical radiolucencies, which increased in the presence of poor coronal restorations, endodontic technical errors, and when both conditions were concomitant. Underfilling was the most frequent technical error, followed by non-homogeneous and non-filled canals. Evaluation of endodontic treatment quality that considers every single root canal aims on warning dental practitioners of the prevalence of technical errors that could be avoided with careful treatment planning and execution.

  2. 75 FR 56857 - Pilot, Flight Instructor, and Pilot School Certification

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-09-17

    ... of part 141. Discussion of Technical Amendment Section 141.5(d) establishes the quality of training... Certification AGENCY: Federal Aviation Administration, DOT. ACTION: Final rule; technical amendment. SUMMARY: The Federal Aviation Administration (FAA) is making minor technical changes to a final rule published...

  3. 75 FR 12740 - Wyoming Interstate Company, Inc.; Notice of Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-03-17

    ... additional technical, engineering, and operational support for its proposed gas quality allocation procedures... should be prepared to support its position with adequate technical, engineering, and operational information. FERC conferences are accessible under section 508 of the Rehabilitation Act of 1973. For...

  4. Periapical status and quality of root fillings in a selected adult Riga population.

    PubMed

    Jersa, Ilana; Kundzina, Rita

    2013-01-01

    The aim of the study was to assess the prevalence of apical periodontitis and quality of root canal fillings in an adult Riga subpopulation. Panoramic radiographs of Latvian adults 35-44 year old attending a private dental clinic for the first time during the period of 2004-2008 were included in the study. Totally, 312 out of 1248 panoramic radiographs were randomly selected and examined for periapical conditions and endodontic treatment quality. The technical quality of root fillings was evaluated in terms of length in relation to the root apex and lateral adaptation to the canal wall. The periapical status was assessed using the PAI index. The data were analyzed using SPSS 14 computer software program. Statistical significance was assessed by the chi-squared (Pearson's) test. Out of the 312 individuals examined 224 (72%) had one or more teeth with apical periodontitis (PAI 3-5) and 272 individuals (87%) had one or more endodontically treated teeth. Amongst 7065 teeth evaluated 1255 (18%) were endodontically treated. Only 285 teeth (23%) of the root canal treated teeth were with complete root canal fillings. There was a statistically significant relationship between quality of root canal fillings and apical periodontitis (p<0.0001). In teeth with complete fillings only 15% were with apical periodontitis, but apical periodontitis were detected in 342 teeth (35%) with incomplete root fillings. The results from this study indicates a high prevalence of apical periodontitis and low quality of root fillings in a selected adult Riga population.

  5. The impact of fuels on aircraft technology through the year 2000

    NASA Technical Reports Server (NTRS)

    Grobman, J.; Reck, G. M.

    1980-01-01

    The impact that the supply, quality, and processing costs of future fuels may have on aircraft technology is assessed. The potential range of properties for future jet fuels is discussed along with the establishment of a data base of fuel property effects on propulsion system components. Also, the evolution and evaluation of advanced component technology that would permit the use of broader property fuels and the identification of technical and economic trade-offs within the overall fuel production-air transportation system associated with variations in fuel properties are examined.

  6. [The definition of benefits: from the benefit package to the supply of services].

    PubMed

    Elola Somoza, J

    1995-01-01

    The definition of a "benefit package" of services covered by the National Health System of Spain--NHSS--raises technical and political problems. This article examines six relevant issues related with the implementation of this strategy: the instrument to define the services covered by the public system; health care expenditures; access to the services; quality; and the decision making-process. The definition of a comprehensive package of--broadly defined--services covered by the NHSS seems to be the most appropriate strategy, instead of a very detailed "catalog" of medical practices.

  7. The paradox of managing a project-oriented matrix: establishing coherence within chaos.

    PubMed

    Greiner, L E; Schein, V E

    1981-01-01

    Projects that require the flexible coordination of multidisciplinary teams have tended to adopt a matrix structure to accomplish complex tasks. Yet these project-oriented matrix structures themselves require careful coordination if they are to realize the objectives set for them. The authors identify the basic organizational questions that project-oriented matrix organizations must face. They examine the relationship between responsibility and authority; the tradeoffs between economic efficiency and the technical quality of the work produced; and the sensitive issues of managing individualistic, highly trained professionals while also maintaining group cohesiveness.

  8. Study of Navy Enlisted Attrition: Race, Ethnicity, and Type of Occupation

    DTIC Science & Technology

    2008-09-01

    technical job. Further research is recommended to explore these results and to suggest approaches that might assist in lowering attrition rates...technical job than to a technical one; in contrast, most minorities are far more likely to attrite when serving in a technical job. Further research is... HIGH QUALITY (HQ) STATUS ..........................33 IV. RESULTS ................................................35 A. DESCRIPTIVE SUMMARY OF THE

  9. Smart Start and Preschool Child Care Quality in North Carolina: Change Over Time and Relation to Children's Readiness.

    ERIC Educational Resources Information Center

    Bryant, Donna; Maxwell, Kelly; Taylor, Karen; Poe, Michele; Peisner-Feinberg, Ellen; Bernier, Kathleen

    The primary goal of Smart Start is to ensure that all children enter school healthy and prepared to succeed. Smart Start has funded a variety of technical assistance (TA) activities to improve child care, including on-site technical assistance, quality improvement and facility grant, teacher education scholarships, license upgrades, teacher salary…

  10. FIELD CHECK MANUAL FOR LANGUAGE LABORATORIES, A SERIES OF TESTS WHICH A NON-TECHNICAL PERSON CAN CONDUCT TO VERIFY SPECIFICATIONS.

    ERIC Educational Resources Information Center

    GRITTNER, FRANK; PAVLAT, RUSSELL

    IN ORDER TO ASSIST NON-TECHNICAL PEOPLE IN SCHOOLS TO CONDUCT A FIELD CHECK OF LANGUAGE LABORATORY EQUIPMENT BEFORE THEY MAKE FINAL PAYMENTS, THIS MANUAL OFFERS CRITERIA, TESTS, AND METHODS OF SCORING THE QUALITY OF THE EQUIPMENT. CHECKLISTS ARE PROVIDED FOR EVALUATING CONSOLE FUNCTIONS, TAPE RECORDERS, AMPLIFIERS, SOUND QUALITY (INCLUDING…

  11. Towards Quality Technical Vocational Education and Training (Tvet) Programmes in Nigeria: Challenges and Improvement Strategies

    ERIC Educational Resources Information Center

    Ayonmike, Chinyere Shirley; Okwelle, P. Chijioke; Okeke, Benjamin Chukwumaijem

    2015-01-01

    Technical Vocational Education and Training (TVET) is widely recognized as a vital driving force for the socio-economic growth and technological development of nations. In achieving the goals and objectives of TVET in Nigeria, the quality of the programme needs to be improved and sustained. The purpose of this study is to ascertain the challenges…

  12. The Effect of Technical Performance on Patient Outcomes in Surgery: A Systematic Review.

    PubMed

    Fecso, Andras B; Szasz, Peter; Kerezov, Georgi; Grantcharov, Teodor P

    2017-03-01

    Systematic review of the effect of intraoperative technical performance on patient outcomes. The operating room is a high-stakes, high-risk environment. As a result, the quality of surgical interventions affecting patient outcomes has been the subject of discussion and research for years. MEDLINE, EMBASE, PsycINFO, and Cochrane databases were searched. All surgical specialties were eligible for inclusion. Data were reviewed in regards to the methods by which technical performance was measured, what patient outcomes were assessed, and how intraoperative technical performance affected patient outcomes. Quality of evidence was assessed using the Medical Education Research Study Quality Instrument (MERSQI). Of the 12,758 studies initially identified, 24 articles (7775 total participants) were ultimately included in this review. Seventeen studies assessed the performance of the faculty alone, 2 assessed both the faculty and trainees, 1 assessed trainees alone, and in 4 studies, the level of the operating surgeon was not specified. In 18 studies, a performance assessment tool was used. Patient outcomes were evaluated using intraoperative complications, short-term morbidity, long-term morbidity, short-term mortality, and long-term mortality. The average MERSQI score was 11.67 (range 9.5-14.5). Twenty-one studies demonstrated that superior technical performance was related to improved patient outcomes. The results of this systematic review demonstrated that superior technical performance positively affects patient outcomes. Despite this initial evidence, more robust research is needed to directly assess intraoperative technical performance and its effect on postoperative patient outcomes using meaningful assessment instruments and reliable processes.

  13. Implementing and Evaluating a National Certification Technical Skills Examination: The Colorectal Objective Structured Assessment of Technical Skill.

    PubMed

    de Montbrun, Sandra; Roberts, Patricia L; Satterthwaite, Lisa; MacRae, Helen

    2016-07-01

    To implement the Colorectal Objective Structured Assessment of Technical skill (COSATS) into American Board of Colon and Rectal Surgery (ABCRS) certification and build evidence of validity for the interpretation of the scores of this high stakes assessment tool. Currently, technical skill assessment is not a formal component of board certification. With the technical demands of surgical specialties, documenting competence in technical skill at the time of certification with a valid tool is ideal. In September 2014, the COSATS was a mandatory component of ABCRS certification. Seventy candidates took the examination, with their performance evaluated by expert colorectal surgeons using a task-specific checklist, global rating scale, and overall performance scale. Passing scores were set and compared using 2 standard setting methodologies, using a compensatory and conjunctive model. Inter-rater reliability and the reliability of the pass/fail decision were calculated using Cronbach alpha and Subkoviak methodology, respectively. Overall COSATS scores and pass/fail status were compared with results on the ABCRS oral examination. The pass rate ranged from 85.7% to 90%. Inter-rater reliability (0.85) and reliability of the pass/fail decision (0.87 and 0.84) were high. A low positive correlation (r= 0.25) was seen between the COSATS and oral examination. All individuals who failed the COSATS passed the ABCRS oral examination. COSATS is the first technical skill examination used in national surgical board certification. This study suggests that the current certification process may be failing to identify individuals who have demonstrated technical deficiencies on this standardized assessment tool.

  14. Critical Analysis of the Quality, Readability, and Technical Aspects of Online Information Provided for Neck-Lifts.

    PubMed

    Rayess, Hani; Zuliani, Giancarlo F; Gupta, Amar; Svider, Peter F; Folbe, Adam J; Eloy, Jean Anderson; Carron, Michael A

    2017-03-01

    The number of patients using the internet to obtain health information is growing. This material is unregulated and heterogeneous and can influence patient decisions. To compare the quality, readability, and technical aspects of online information about neck-lifts provided by private practice websites vs academic medical centers and reference sources. In this cross-sectional analysis conducted between November 2015 and January 2016, a Google search of the term neck-lift was performed, and the first 45 websites were evaluated. The websites were categorized as private practice vs other. Private websites (PWs) included sites created by private practice physicians. Other websites (OWs) were created by academic medical centers or reference sources. Quality, readability, and technical aspects of online websites related to neck-lifts. Quality was assessed using the DISCERN criteria and the Health on the Net principles (HONcode). Readability was assessed using 7 validated and widely used criteria. Consensus US reading grade level readability was provided by a website (readabilityformulas.com). Twelve technical aspects were evaluated based on criteria specified by medical website creators. Forty-five websites (8 OWs [18%] and 37 PWs [82%]) were analyzed. There was a significant difference in quality between OWs and PWs based on the DISCERN criteria and HONcode principles. The DISCERN overall mean (SD) scores were 2.3 (0.5) for OWs and 1.3 (0.3) for PWs (P < .001). Of a total possible score of 14 using the HONcode analysis, the mean (SD) was 8.6 (1.8) (range, 5-11) for OW, and the mean (SD) was 5.8 (1.7) (range, 2-9) for PW. The mean (SD) readability consensus reading grade level scores were 11.7 (1.9) for OWs and 10.6 (1.9) for PWs. Of a total possible score of 12, the mean (SD) technical scores were 6.3 (1.8) (range, 4-9) for OWs and 6.4 (1.5) (range, 3-9) for PWs. Compared with PWs, OWs had a significantly higher quality score based on both the DISCERN criteria and HONcode principles. The mean readability for OWs and PWs was grade 11 and grade 10, respectively, significantly higher than the grade 7 level recommended by the National Institutes of Health. Assessment of technical criteria demonstrated room for improvement in providing links to social media and blogs and reducing advertisements. Improving the quality and readability of online information may result in increased patient understanding, more active patient involvement, and ultimately better outcomes. Enhancing the technical aspects of websites may increase website traffic and patient volume. NA.

  15. STP 4-06 Model-Based Technical Data in Procurement, 3D PDF Technology Data Demonstration Project. Phase 1 Summary

    DTIC Science & Technology

    2015-07-01

    O R G STP 4-06 MODEL-BASED TECHNICAL DATA IN PROCUREMENT 3D PDF TECHNOLOGY DATA DEMONSTRATION PROJECT PHASE 1 SUMMARY REPORT DL309T2...LMI’s ISO- certified quality management procedures. J U L Y 2 0 1 5 STP 4-06 MODEL-BASED TECHNICAL DATA IN PROCUREMENT 3D PDF TECHNICAL DATA...Based Technical Data ..................................................................................... 5 3D PDF Demonstration Team

  16. Technical knowledge and skills development in the informal sector in Kenya: The case of custom tailors

    NASA Astrophysics Data System (ADS)

    Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

    2017-06-01

    Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of technical skills and knowledge which tailoring apprentices develop, and the factors which influence these outcomes. The findings show that apprentices do acquire basic technical skills for immediate application to ongoing tailoring activities (such as how to take body measurements, draft patterns, and cut, sew and finish constructed garments). However, apprentices do not acquire the technical knowledge that underpins the trade. Most master tailors who have completed TAs lack technical knowledge and have no access to technical skills upgrading. This perpetuates the cycle of basic and limited technical skills transfer to apprentices, poor performance and poverty among tailors. Both apprentices and master tailors expressed concern over knowledge limitations in TAs and a need to access further training to improve skills and acquire knowledge of the trade. The authors of this article argue that, technically and pedagogically, skilled master tailors are critical to improving training quality. Complementary training in theoretical knowledge is also important in improving apprentices' technical skills and understanding of the trade. Inclusion of TAs in government policy may help ensure sustainable improvement of skills.

  17. Evaluation of image quality of digital photo documentation of female genital injuries following sexual assault.

    PubMed

    Ernst, E J; Speck, Patricia M; Fitzpatrick, Joyce J

    2011-12-01

    With the patient's consent, physical injuries sustained in a sexual assault are evaluated and treated by the sexual assault nurse examiner (SANE) and documented on preprinted traumagrams and with photographs. Digital imaging is now available to the SANE for documentation of sexual assault injuries, but studies of the image quality of forensic digital imaging of female genital injuries after sexual assault were not found in the literature. The Photo Documentation Image Quality Scoring System (PDIQSS) was developed to rate the image quality of digital photo documentation of female genital injuries after sexual assault. Three expert observers performed evaluations on 30 separate images at two points in time. An image quality score, the sum of eight integral technical and anatomical attributes on the PDIQSS, was obtained for each image. Individual image quality ratings, defined by rating image quality for each of the data, were also determined. The results demonstrated a high level of image quality and agreement when measured in all dimensions. For the SANE in clinical practice, the results of this study indicate that a high degree of agreement exists between expert observers when using the PDIQSS to rate image quality of individual digital photographs of female genital injuries after sexual assault. © 2011 International Association of Forensic Nurses.

  18. [Do laymen understand information about hospital quality? An empirical verification using risk-adjusted mortality rates as an example].

    PubMed

    Sander, Uwe; Kolb, Benjamin; Taheri, Fatemeh; Patzelt, Christiane; Emmert, Martin

    2017-11-01

    The effect of public reporting to improve quality in healthcare is reduced by the limited intelligibility of information about the quality of healthcare providers. This may result in worse health-related choices especially for older people and those with lower levels of education. There is, as yet, little information as to whether laymen understand the concepts behind quality comparisons and if this comprehension is correlated with hospital choices. An instrument with 20 items was developed to analyze the intelligibility of five technical terms which were used in German hospital report cards to explain risk-adjusted death rates. Two online presentations of risk-adjusted death rates for five hospitals in the style of hospital report cards were developed. An online survey of 353 volunteers tested the comprehension of the risk-adjusted mortality rates and included an experimental hospital choice. The intelligibility of five technical terms was tested: risk-adjusted, actual and expected death rate, reference range and national average. The percentages of correct answers for the five technical terms were in the range of 75.0-60.2%. Between 23.8% and 5.1% of the respondents were not able to answer the question about the technical term itself. The least comprehensible technical terms were "risk-adjusted death rate" and "reference range". The intelligibility of the 20 items that were used to test the comprehension of the risk-adjusted mortality was between 89.5% and 14.2%. The two items that proved to be least comprehensible were related to the technical terms "risk-adjusted death rate" and "reference range". For all five technical terms it was found that a better comprehension correlated significantly with better hospital choices. We found a better than average intelligibility for the technical terms "actual and expected death rate" and for "national average". The least understandable were "risk-adjusted death rate" and "reference range". Since the self-explanatory technical terms "actual and expected death rate" and "national average" are easy to understand and the comprehension is correlated with hospitals choices, we recommend using them for the presentation of measures which contain risk-adjusted mortality. The technical terms "risk-adjusted death rate" and "reference range" should stay in the background, since comprehension problems can be expected and explanations would have to be provided. Copyright © 2017. Published by Elsevier GmbH.

  19. Technical and Non-Technical Measures for air pollution emission reduction: The integrated assessment of the regional Air Quality Management Plans through the Italian national model

    NASA Astrophysics Data System (ADS)

    D'Elia, I.; Bencardino, M.; Ciancarella, L.; Contaldi, M.; Vialetto, G.

    2009-12-01

    The Italian Air Quality legislation underwent sweeping changes with the implementation of the 1996 European Air Quality Framework Directive when the Italian administrative Regions were entrusted with air quality management tasks. The most recent Regional Air Quality Management Plans (AQMPs) highlighted the importance of Non-Technical Measures (NTMs), in addition to Technical Measures (TMs), in meeting environmental targets. The aim of the present work is to compile a list of all the TMs and NTMs taken into account in the Italian Regional AQMPs and to give in the target year, 2010, an estimation of SO 2, NO x and PM 10 emission reductions, of PM 10 concentration and of the health impact of PM 2.5 concentrations in terms of Life Expectancy Reduction. In order to do that, RAINS-Italy, as part of the National Integrated Modeling system for International Negotiation on atmospheric pollution (MINNI), has been applied. The management of TMs and NTMs inside RAINS have often obliged both the introduction of exogenous driving force scenarios and the control strategy modification. This has inspired a revision of the many NTM definitions and a clear choice of the definition adopted. It was finally highlighted that only few TMs and NTMs implemented in the AQMPs represent effective measures in reaching the environmental targets.

  20. 77 FR 41132 - Air Quality Implementation Plans; Alabama; Attainment Plan for the Alabama Portion of the...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-12

    ... modeling demonstration should include supporting technical analyses and descriptions of all relevant....5 and NO X . The attainment demonstration includes: Technical analyses that locate, identify, and... modeling analysis is a complex technical evaluation that began with selection of the modeling system. The...

  1. 76 FR 43136 - Approval and Promulgation of Air Quality Implementation Plan; Kentucky; Disapproval of Interstate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-20

    ... supported by an adequate technical analysis. Second, EPA recommended the various types of information that... technical analysis, including, but not limited to, information concerning emissions in the state...: ``* * * without an adequate technical analysis EPA does not believe that states can sufficiently address the...

  2. 76 FR 14584 - Approval and Promulgation of Air Quality Implementation Plans; Montana; Attainment Plan for Libby...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-17

    ... the timeframe provided in the statute. It must also include supporting technical analyses and... emissions inventory (EI), a woodstove air pollution control calculation, and a technical analysis showing... year (2010); and (2) an attainment demonstration consisting of: (a) Technical analyses that locate...

  3. 76 FR 2853 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Infrastructure State...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-18

    ... technical analysis submitted for parallel-processing by DNREC on December 9, 2010, to address significant... technical analysis submitted by DNREC for parallel-processing on December 9, 2010, to satisfy the... consists of a technical analysis that provides detailed support for Delaware's position that it has...

  4. 40 CFR 58.11 - Network technical requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 5 2010-07-01 2010-07-01 false Network technical requirements. 58.11... (CONTINUED) AMBIENT AIR QUALITY SURVEILLANCE Monitoring Network § 58.11 Network technical requirements. (a)(1... A to this part when operating the SLAMS networks. (2) Beginning January 1, 2009, State and local...

  5. 40 CFR 58.11 - Network technical requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 40 Protection of Environment 5 2011-07-01 2011-07-01 false Network technical requirements. 58.11... (CONTINUED) AMBIENT AIR QUALITY SURVEILLANCE Monitoring Network § 58.11 Network technical requirements. (a)(1... A to this part when operating the SLAMS networks. (2) Beginning January 1, 2009, State and local...

  6. Preparing Workforce 2000 through Vocational Technical 2+2 Programs.

    ERIC Educational Resources Information Center

    Portland Area Vocational-Technical Education Consortium, OR.

    An overview is provided of the 1989 accomplishments of the Portland Area Vocational Technical Education Consortium (PAVTEC), which was created to strengthen partnerships between Portland Community College (PCC) and local high schools to provide high quality articulated vocational-technical programs. The first section looks at the roles of PAVTEC,…

  7. 78 FR 48407 - Defense Federal Acquisition Regulation Supplement: Clauses With Alternates-Quality Assurance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-08

    ... calibration procedures under MIL-T-31000, General Specification for Technical Data Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or drawings and associated... Packages, Amendment 1, or MIL-T-47500, General Specification for Technical Data Packages, Supp 1, or...

  8. Colonialism and Secondary Technical Education in Hong Kong: 1945-1997

    ERIC Educational Resources Information Center

    Lau, Wai Wah; Kan, Flora

    2011-01-01

    This study examines the influence of the colonial experience (1945-1997) on the planning of secondary technical education in Hong Kong. Specifically, the origins of secondary technical institutions and their positioning in secondary education are examined. Primary source materials are used as the basis of investigation and analysis, supplemented…

  9. The quality assurance liaison: Combined technical and quality assurance support

    NASA Astrophysics Data System (ADS)

    Bolivar, S. L.; Day, J. L.

    1993-03-01

    The role of the quality assurance liaison, the responsibilities of this position, and the evolutionary changes in duties over the last six years are described. The role of the quality assurance liaison has had a very positive impact on the Los Alamos Yucca Mountain Site Characterization (YW) quality assurance program. Having both technical and quality assurance expertise, the quality assurance liaisons are able to facilitate communications with scientists on quality assurance issues and requirements, thereby generating greater productivity in scientific investigations. The quality assurance liaisons help ensure that the scientific community knows and implements existing requirements, is aware of new or changing regulations, and is able to conduct scientific work within Project requirements. The influence of the role of the quality assurance liaison can be measured by an overall improvement in attitude of the staff regarding quality assurance requirements and improved job performance, as well as a decrease in deficiencies identified during both internal and external audits and surveillances. This has resulted in a more effective implementation of quality assurance requirements.

  10. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... validation of analytical procedures. Quality assurance procedures must be designed, implemented, and reviewed... resolving any technical, methodological, or administrative errors in the licensee testing facility's testing...

  11. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... validation of analytical procedures. Quality assurance procedures must be designed, implemented, and reviewed... resolving any technical, methodological, or administrative errors in the licensee testing facility's testing...

  12. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... validation of analytical procedures. Quality assurance procedures must be designed, implemented, and reviewed... resolving any technical, methodological, or administrative errors in the licensee testing facility's testing...

  13. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... validation of analytical procedures. Quality assurance procedures must be designed, implemented, and reviewed... resolving any technical, methodological, or administrative errors in the licensee testing facility's testing...

  14. 10 CFR 26.137 - Quality assurance and quality control.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... validation of analytical procedures. Quality assurance procedures must be designed, implemented, and reviewed... resolving any technical, methodological, or administrative errors in the licensee testing facility's testing...

  15. Promoting Change in State Policy Decisionmaking on Quality Infant/Toddler Child Care and Head Start Services: Study on a Technical Assistance Forum.

    ERIC Educational Resources Information Center

    Griffin, Abbey; Fiene, Richard

    In June 1991, the National Center for Clinical Infant Programs invited 320 state policymakers, leaders of national and state advocacy organizations, and practitioners to a technical assistance forum on "Finding and Funding Quality Child Care and Head Start Services for Infants and Toddlers." The forum focused on essential practices in…

  16. Commercial Television Personnel's Review of the Technical Quality and Marketability of AEL's "Around the Bend" Pilot Tapes. Technical Report No. 29.

    ERIC Educational Resources Information Center

    Shively, Joe E.

    In order to determine whether Appalachia Educational Laboratory (AEL) had the capacity to produce a TV series of sufficient quality, two pilot tapes were produced by AEL and then submitted for rating to nine broadcasting specialists from several commercial TV stations. Based on the responses of these nine individuals to a questionnaire dealing…

  17. The Development of a Technical Conceptual Structure for the Concepts Possessed by Selected Quality Control Specialists. Report of a Research Project.

    ERIC Educational Resources Information Center

    Nee, John G.

    This project had as its specific objective the development and field testing of a procedure for identifying the structure of technical concepts possessed by a group of selected quality control specialists. The associative theory of verbal behavior served as the rationale by which conceptual structures depicted by graphical maps of technical…

  18. [The telemedical service centre as an essential element of the conceptual approach for telemonitoring of cardiac patients : Requirements on the service, quality, and technical realization of telemonitoring].

    PubMed

    Helms, T M; Müller, A; Perings, C; Köhler, F; Leonhardt, V; Rybak, K; Sack, S; Stockburger, M

    2017-09-01

    Telemonitoring as part of a treatment strategy supports and facilitates the monitoring, disease management and education of patients with heart failure and cardiac arrhythmias. Therefore, telemonitoring affects quality and success of the therapy. Thus, meeting the needs of the patients and of the involved health care professionals is important for the success of the telemonitoring service. Moreover, a high quality of the service has to be ensured. The following article describes several configuration options for telemonitoring services considering technical as well as quality- and service-related aspects.

  19. Dual-energy KUB radiographic examination for the detection of renal calculus.

    PubMed

    Yen, Peggy; Bailly, Greg; Pringle, Christopher; Barnes, David

    2014-08-01

    The dual-energy radiographic technique has been proved to be clinically useful in the thorax. Herein, we attempt to apply this technique to the abdomen and pelvis in the context of renal colic. The visibility of renal calculi were assessed using various dual energy peak kilovoltage combination radiographs applied to standard phantoms. This technique demonstrates a higher than acceptable radiation dosage required to optimize the image quality and the optimized diagnostic quality is inferior to that of the standard Kidneys, Ureters, and Bladder radiograph. The dual-energy radiographic technique could not better identify the radiopaque renal calculi. Limiting technical considerations include the increased subcutaneous and peritoneal adipose tissue and the limited contrast between the soft tissue and underlying calculi. Copyright © 2014 AUR. Published by Elsevier Inc. All rights reserved.

  20. Telemedicine in emergency evaluation of acute stroke: interrater agreement in remote video examination with a novel multimedia system.

    PubMed

    Handschu, René; Littmann, Rebekka; Reulbach, Udo; Gaul, Charly; Heckmann, Josef G; Neundörfer, Bernhard; Scibor, Mateusz

    2003-12-01

    In acute stroke care, rapid but careful evaluation of patients is mandatory but requires an experienced stroke neurologist. Telemedicine offers the possibility of bringing such expertise quickly to more patients. This study tested for the first time whether remote video examination is feasible and reliable when applied in emergency stroke care using the National Institutes of Health Stroke Scale (NIHSS). We used a novel multimedia telesupport system for transfer of real-time video sequences and audio data. The remote examiner could direct the set-top camera and zoom from distant overviews to close-ups from the personal computer in his office. Acute stroke patients admitted to our stroke unit were examined on admission in the emergency room. Standardized examination was performed by use of the NIHSS (German version) via telemedicine and compared with bedside application. In this pilot study, 41 patients were examined. Total examination time was 11.4 minutes on average (range, 8 to 18 minutes). None of the examinations had to be stopped or interrupted for technical reasons, although minor problems (brightness, audio quality) with influence on the examination process occurred in 2 sessions. Unweighted kappa coefficients ranged from 0.44 to 0.89; weighted kappa coefficients, from 0.85 to 0.99. Remote examination of acute stroke patients with a computer-based telesupport system is feasible and reliable when applied in the emergency room; interrater agreement was good to excellent in all items. For more widespread use, some problems that emerge from details like brightness, optimal camera position, and audio quality should be solved.

  1. The examination assessment of technical competence in vascular surgery.

    PubMed

    Pandey, V A; Wolfe, J H N; Liapis, C D; Bergqvist, D

    2006-09-01

    The European Board of Surgery Qualification in Vascular Surgery is a pan-European examination for vascular surgeons who have attained a national certificate of completion of specialist training. A 2-year study was conducted before the introduction of a technical skills assessment in the examination. The study included 30 surgeons: 22 candidates and eight examiners. They were tested on dissection (on a synthetic saphenofemoral junction model), anastomosis (on to anterior tibial artery of a synthetic leg model) and dexterity (a knot-tying simulator with electromagnetic motion analysis). Validated rating scales were used by two independent examiners. Composite knot-tying scores were calculated for the computerized station. The stations were weighted 35, 45 and 20 percent, respectively. Examiners performed better than candidates in the dissection (P<0.001), anastomosis (P=0.002) and dexterity (P=0.005) stations. Participants performed consistently in the examination (dissection versus anastomosis: r=0.79, P<0.001; dexterity versus total operative score: r=-0.73, P<0.001). Interobserver reliability was high (alpha=0.91). No correlation was seen between a candidate's technical skill and oral examination performance or logbook-accredited scores. Current surgical examinations do not address technical competence. This model appears to be a valid assessment of technical skills in an examination setting. The standards are set at a level appropriate for a specialist vascular surgeon. Copyright (c) 2006 British Journal of Surgery Society Ltd.

  2. SAM Technical Contacts

    EPA Pesticide Factsheets

    These technical contacts are available to help with questions regarding method deviations, modifications, sample problems or interferences, quality control requirements, the use of alternative methods, or the need to address analytes or sample types.

  3. The Need for Consumer Relations in Technical Education.

    ERIC Educational Resources Information Center

    Isberner, Fred R.; Armstrong, Connie

    1995-01-01

    Technical education curricula should include the topical area of customer relations. Students need to learn how to listen to customers, handle complaints, monitor quality, and understand customer satisfaction. (SK)

  4. International Conference on Harmonisation; guidance on the M4 Common Technical Document--Quality: Questions and Answers/Location Issues; availability. Notice.

    PubMed

    2004-06-09

    The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "M4: The CTD--Quality: Questions and Answers/Location Issues." The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). This guidance provides further clarification for preparing the quality components of an application file in the common technical document (CTD) format. The guidance addresses the relationship between linked sections for certain parameters (such as polymorphism and particle size), and it addresses location issues (by indicating the section in which to place requested information). The guidance is intended to ease the preparation of paper and electronic submissions, facilitate regulatory reviews, and simplify the exchange of regulatory information among regulatory authorities.

  5. Technical Change in the North American Forestry Sector: A Review

    Treesearch

    Jeffery C. Stier; David N. Bengston

    1992-01-01

    Economists have examined the impact of technical change on the forest products sector using the historical, index number, and econometric approaches. This paper reviews econometric analyses of the rate and bias of technical change, examining functional form, factors included, and empirical results. Studies are classified as first- second-, or third-generation...

  6. 76 FR 14835 - Approval and Promulgation of Air Quality Implementation Plan; Missouri; Proposed Disapproval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-18

    ... the state's conclusion should be supported by an adequate technical analysis. EPA recommended the...)(2)(D)(i)(I) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various..., the state did not further evaluate or demonstrate with a technical analysis that these measures...

  7. 76 FR 43167 - Approval and Promulgation of Air Quality Implementation Plan; North Carolina; Disapproval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-20

    ... stated that the state's conclusion should be supported by an adequate technical analysis. Second, EPA... revision must be supported by an adequate technical analysis, including, but not limited to, information... disapproval where the Agency states: ``* * * without an adequate technical analysis EPA does not believe that...

  8. 76 FR 14831 - Approval and Promulgation of Air Quality Implementation Plan; Kansas; Proposed Disapproval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-18

    ... State's conclusion should be supported by an adequate technical analysis. EPA recommended the various...) must be supported by an adequate technical analysis.\\5\\ EPA recommended the various types of... evaluate or demonstrate with a technical analysis that these measures address the requirements of 110(a)(2...

  9. 76 FR 43159 - Approval and Promulgation of Air Quality Implementation Plan; Georgia; Disapproval of Interstate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-20

    ... stated that the state's conclusion should be supported by an adequate technical analysis. Second, EPA...'' provisions, the state's SIP revision must be supported by an adequate technical analysis, including, but not..., proposed disapproval where the Agency states: ``* * * without an adequate technical analysis EPA does not...

  10. 76 FR 53638 - Approval and Promulgation of Air Quality Implementation Plans; Delaware; Infrastructure State...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-08-29

    ...), DNREC supplemented its September 16, 2009 submittal with a technical analysis submitted to EPA for... supplemental technical analysis, for which it has requested parallel-processing, through the public notice and... submitted the technical analysis to EPA as a formal supplement to its September 16, 2009 submittal. The...

  11. 76 FR 43128 - Approval and Promulgation of Air Quality Implementation Plan; Alabama; Disapproval of Interstate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-20

    ..., if so, address the impact. The state's conclusion must be supported by an adequate technical analysis...'' provisions, the state's SIP revision must be supported by an adequate technical analysis, including, but not... disapproval where the Agency states: ``* * *without an adequate technical analysis EPA does not believe that...

  12. 76 FR 4592 - Approval and Promulgation of Air Quality Implementation Plan; North Carolina; Disapproval of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-26

    ... adequate technical analysis. Second, EPA recommended the various types of information that could be... submission, it did not further evaluate or demonstrate with a technical analysis that this measure and their.... Unfortunately, without an adequate technical analysis EPA does not believe that states can sufficiently address...

  13. 78 FR 47253 - Approval and Promulgation of Air Quality Implementation Plans; Maine; Oxides of Nitrogen...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-05

    ...-hour ozone standard in any area in the OTR. The State's submittals include detailed technical analyses... areas in the OTR. The State's technical analyses rely on several different techniques used to analyze... Maine's requests? Based on the ME DEP's technical analyses discussed above, EPA believes that the State...

  14. Improving Technical Vocational Education and Training in the Kurdistan Region--Iraq

    ERIC Educational Resources Information Center

    Constant, Louay; Culbertson, Shelly; Stasz, Cathleen; Vernez, Georges

    2014-01-01

    As Iraq's Kurdistan region develops rapidly, it is creating jobs that require a solid education and technical skills. The government has launched an ambitious reform of basic and secondary education to increase its quality and has expanded opportunities for tertiary technical and university education. But expansion of secondary vocational…

  15. How to Improve the Design and Delivery of High-Quality Technical Assistance. Newsletter

    ERIC Educational Resources Information Center

    Center for Comprehensive School Reform and Improvement, 2005

    2005-01-01

    Educators often use the term technical assistance to define services delivered or received in the pursuit of school- and district-improvement initiatives. More specifically, technical assistance can be defined as any assistance that identifies, selects, or designs research-based solutions and practices to support school improvement (Mattson &…

  16. Design and quality standards for custom hybrid microcircuits

    NASA Technical Reports Server (NTRS)

    Allen, R. V.

    1977-01-01

    A hybrid microcircuit standard was developed after a thorough review of applicable NASA, military, industry, and technical society specifications and standards and compilation of comments from technical reviewers throughout the hybrid industry. The draft of the standard submitted to the technical reviewers, the comments from the reviewers, and the completed standard are discussed.

  17. The Technical Baccalaureate: Providing Excellence in Vocational Education?

    ERIC Educational Resources Information Center

    Acquah, Daniel K.; Malpass, Debra

    2017-01-01

    Proposals for a technical baccalaureate have received cross-party support in England. The technical baccalaureate is intended to deliver the necessary training to enable young people to fill the UK's skills gap in intermediate-level occupations in STEM and other sectors. This paper explores how to design and implement a high-quality technical…

  18. Research in Technical Colleges

    ERIC Educational Resources Information Center

    MacLennan, A.

    2008-01-01

    Purpose: The purpose of this paper is to list and demonstrate areas in which research needs to be carried out, or questions answered, in order to raise the quality of technical education. Design/methodology/approach: The area of technical education expanded very rapidly in the late 1950s, and there was little comprehensive knowledge regarding the…

  19. An Analysis of Gateway Technical College Instructors' Opinions on Secondary and Postsecondary Program Alignment

    ERIC Educational Resources Information Center

    Albrecht, Bryan D.

    2011-01-01

    The purpose of this study was to determine what opinions Gateway Technical College instructors had toward secondary and postsecondary program alignment. Student transition is critical to supporting the mission and vision of Gateway Technical College. The impetus for this study was twofold. First, the quality improvement process established at…

  20. Connections for the Future through Vocational Technical 2 + 2 Programs. Annual Report, April 1989.

    ERIC Educational Resources Information Center

    Portland Area Vocational-Technical Education Consortium, OR.

    The Portland Area Vocational Technical Education Consortium (PAVTEC) was created to enhance and strengthen the working partnerships between Portland Community College and local high schools in order to provide high quality, articulated vocational technical programs. PAVTEC's third annual report highlights activities which have added to the…

  1. Biasogram: Visualization of Confounding Technical Bias in Gene Expression Data

    PubMed Central

    Krzystanek, Marcin; Szallasi, Zoltan; Eklund, Aron C.

    2013-01-01

    Gene expression profiles of clinical cohorts can be used to identify genes that are correlated with a clinical variable of interest such as patient outcome or response to a particular drug. However, expression measurements are susceptible to technical bias caused by variation in extraneous factors such as RNA quality and array hybridization conditions. If such technical bias is correlated with the clinical variable of interest, the likelihood of identifying false positive genes is increased. Here we describe a method to visualize an expression matrix as a projection of all genes onto a plane defined by a clinical variable and a technical nuisance variable. The resulting plot indicates the extent to which each gene is correlated with the clinical variable or the technical variable. We demonstrate this method by applying it to three clinical trial microarray data sets, one of which identified genes that may have been driven by a confounding technical variable. This approach can be used as a quality control step to identify data sets that are likely to yield false positive results. PMID:23613961

  2. Should We Recommend Renal Diet-Related Apps to Our Patients? An Evaluation of the Quality and Health Literacy Demand of Renal Diet-Related Mobile Applications.

    PubMed

    Lambert, Kelly; Mullan, Judy; Mansfield, Kylie; Owen, Paris

    2017-11-01

    Mobile phone applications (apps) are increasingly being used by patients with chronic kidney disease (CKD). We sought to describe the main purpose of commonly available renal diet apps and to quantify the accuracy of information, technical quality, and health literacy demand of renal diet apps. The design was content analysis. All eligible renal diet apps in the Australian Apple App Store, Google Play, Windows Phone, and Blackberry App World were evaluated. Eligible apps were in English and were related to kidney disease in humans (of any type or stage). Exclusion criteria included apps which were prohibited because of password protection. Renal diet information in the apps was compared with evidence-based guidelines for the management of kidney disease to quantify information accuracy. App information was evaluated using the Silberg Scale. Technical quality and health literacy demand were evaluated using the Mobile Application Rating Scale. A total of 21 apps were eligible for evaluation. The main purpose of these apps was to provide food and nutrition information (57.1%) or for educative purposes for CKD patients (38.1%). Only 47.6% (10/21) of apps contained accurate evidence-based information. Overall, app technical quality was considered acceptable (mean Mobile Application Rating Scale score 3.19 ± 0.35 out of 5), with 80.9% of apps scoring acceptable or greater for app technical quality. Scores for health literacy demand also indicated that most apps (15/21, 71.4%) were acceptable. A range of apps currently exist that may provide individuals with CKD with useful food and nutrition information or increase their knowledge of the renal diet. These apps are also mainly of acceptable technical quality and health literacy demand. However, caution is required when using renal diet apps because more than half of the apps evaluated were not accurate and evidence based. Copyright © 2017 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  3. A Socio-technical assessment of the success of picture archiving and communication systems: the radiology technologist’s perspective

    PubMed Central

    2013-01-01

    Background With the increasing prevalence of Picture Archiving and Communication Systems (PACS) in healthcare institutions, there is a growing need to measure their success. However, there is a lack of published literature emphasizing the technical and social factors underlying a successful PACS. Methods An updated Information Systems Success Model was utilized by radiology technologists (RTs) to evaluate the success of PACS at a large medical center in Taiwan. A survey, consisting of 109 questionnaires, was analyzed by Structural Equation Modeling. Results Socio-technical factors (including system quality, information quality, service quality, perceived usefulness, user satisfaction, and PACS dependence) were proven to be effective measures of PACS success. Although the relationship between service quality and perceived usefulness was not significant, other proposed relationships amongst the six measurement parameters of success were all confirmed. Conclusions Managers have an obligation to improve the attributes of PACS. At the onset of its deployment, RTs will have formed their own subjective opinions with regards to its quality (system quality, information quality, and service quality). As these personal concepts are either refuted or reinforced based on personal experiences, RTs will become either satisfied or dissatisfied with PACS, based on their perception of its usefulness or lack of usefulness. A satisfied RT may play a pivotal role in the implementation of PACS in the future. PMID:24053458

  4. Technical Report, Onondaga Lake, New York, Main Report

    DTIC Science & Technology

    1992-01-01

    growth . Section 3 of this report will expand upon the specific water quality problems. EXISTING CONDITIONS Page 23 Table V - Comparison of Current...This technical report on Ononidaga Lake, New York has compi led existing data to determine which water quality and enviromental enhancements are... bacteria is a problem during storm events causing contravention of the State swimming standards. The source of the problem has been identified as the

  5. Quality Inspection and Analysis of Three-Dimensional Geographic Information Model Based on Oblique Photogrammetry

    NASA Astrophysics Data System (ADS)

    Dong, S.; Yan, Q.; Xu, Y.; Bai, J.

    2018-04-01

    In order to promote the construction of digital geo-spatial framework in China and accelerate the construction of informatization mapping system, three-dimensional geographic information model emerged. The three-dimensional geographic information model based on oblique photogrammetry technology has higher accuracy, shorter period and lower cost than traditional methods, and can more directly reflect the elevation, position and appearance of the features. At this stage, the technology of producing three-dimensional geographic information models based on oblique photogrammetry technology is rapidly developing. The market demand and model results have been emerged in a large amount, and the related quality inspection needs are also getting larger and larger. Through the study of relevant literature, it is found that there are a lot of researches on the basic principles and technical characteristics of this technology, and relatively few studies on quality inspection and analysis. On the basis of summarizing the basic principle and technical characteristics of oblique photogrammetry technology, this paper introduces the inspection contents and inspection methods of three-dimensional geographic information model based on oblique photogrammetry technology. Combined with the actual inspection work, this paper summarizes the quality problems of three-dimensional geographic information model based on oblique photogrammetry technology, analyzes the causes of the problems and puts forward the quality control measures. It provides technical guidance for the quality inspection of three-dimensional geographic information model data products based on oblique photogrammetry technology in China and provides technical support for the vigorous development of three-dimensional geographic information model based on oblique photogrammetry technology.

  6. 7 CFR 634.23 - Water quality plan.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... quality improvement. These measures are not eligible for cost sharing under this program. The installation... Conservation Service will certify as to the technical adequacy of the water-quality plan. (g) The soil...

  7. Validity and reliability of Internet-based physiotherapy assessment for musculoskeletal disorders: a systematic review.

    PubMed

    Mani, Suresh; Sharma, Shobha; Omar, Baharudin; Paungmali, Aatit; Joseph, Leonard

    2017-04-01

    Purpose The purpose of this review is to systematically explore and summarise the validity and reliability of telerehabilitation (TR)-based physiotherapy assessment for musculoskeletal disorders. Method A comprehensive systematic literature review was conducted using a number of electronic databases: PubMed, EMBASE, PsycINFO, Cochrane Library and CINAHL, published between January 2000 and May 2015. The studies examined the validity, inter- and intra-rater reliabilities of TR-based physiotherapy assessment for musculoskeletal conditions were included. Two independent reviewers used the Quality Appraisal Tool for studies of diagnostic Reliability (QAREL) and the Quality Assessment of Diagnostic Accuracy Studies (QUADAS) tool to assess the methodological quality of reliability and validity studies respectively. Results A total of 898 hits were achieved, of which 11 articles based on inclusion criteria were reviewed. Nine studies explored the concurrent validity, inter- and intra-rater reliabilities, while two studies examined only the concurrent validity. Reviewed studies were moderate to good in methodological quality. The physiotherapy assessments such as pain, swelling, range of motion, muscle strength, balance, gait and functional assessment demonstrated good concurrent validity. However, the reported concurrent validity of lumbar spine posture, special orthopaedic tests, neurodynamic tests and scar assessments ranged from low to moderate. Conclusion TR-based physiotherapy assessment was technically feasible with overall good concurrent validity and excellent reliability, except for lumbar spine posture, orthopaedic special tests, neurodynamic testa and scar assessment.

  8. 2005 v4.2 Technical Support Document

    EPA Pesticide Factsheets

    Technical Support Document for the Final Transport Rule describes how updated 2005 NEI, version 2 emissions and were processed for air quality modeling in support of the Cross-state Air Pollution Rule (CSAPR).

  9. 78 FR 49749 - Trailblazer Pipeline Company LLC; Notice of Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-08-15

    ... technical, engineering, and operational support for its proposed gas quality specifications. Consistent with... Rehabilitation Act of 1973. For accessibility accommodations please send an email to [email protected] or...

  10. Information system of quality assessment for liquid and gaseous medium production

    NASA Astrophysics Data System (ADS)

    Bobrov, V. N.; Us, N. A.; Davidov, I. S.

    2018-05-01

    A method and a technical solution for controlling the quality of production of liquid and gaseous media is proposed. It is also proposed to monitor harmful factors in production while ensuring safe working conditions. Initially, using the mathematical model of an ideal atmosphere, the projection to the horizontal surface of the observation trajectory is calculated. At the second stage, the horizontal projection of the observation trajectory in real conditions is measured. The quality of the medium is judged by the difference between the projections of observation trajectories. The technical result is presented in the form of a device allowing obtaining information about the quality of the medium under investigation.

  11. The Skills that Technical Communicators Need: An Investigation of Technical Communication Graduates, Managers, and Curricula

    ERIC Educational Resources Information Center

    Whiteside, Aimee L.

    2003-01-01

    This study examines the skills that recent technical communication graduates and managers believe technical communication students need before entering business and industry as new technical communicators. Through questionnaires and interviews with recent graduates and managers of technical communication departments as well as an analysis of the…

  12. Technical Subjects in Secondary Schools

    ERIC Educational Resources Information Center

    Howard, A. E.

    2008-01-01

    Purpose: This paper aims to examine technical education in various types of secondary schools, and suggests three levels of technical courses to be taught in secondary schools. Design/methodology/approach: The paper discusses the differences between technical schools and colleges, and vocational technical courses taught in "academic"…

  13. [Technical specification for clinical application of critical ultrasonography].

    PubMed

    Yin, M G; Wang, X T; Liu, D W; Chao, Y G; Guan, X D; Kang, Y; Yan, J; Ma, X C; Tang, Y Q; Hu, Z J; Yu, K J; Chen, D C; Ai, Y H; Zhang, L N; Zhang, H M; Wu, J; Liu, L X; Zhu, R; He, W; Zhang, Q; Ding, X; Li, L; Li, Y; Liu, H T; Zeng, Q B; Si, X; Chen, H; Zhang, J W; Xu, Q H; Chen, W J; Chen, X K; Huang, D Z; Cai, S H; Shang, X L; Guan, J; Du, J; Zhao, L; Wang, M J; Cui, S; Wang, X M; Zhou, R; Zeng, X Y; Wang, Y P; Lyu, L W; Zhu, W H; Zhu, Y; Duan, J; Yang, J; Yang, H

    2018-06-01

    Critical ultrasonography(CUS) is different from the traditional diagnostic ultrasound, the examiner and interpreter of the image are critical care medicine physicians. The core content of CUS is to evaluate the pathophysiological changes of organs and systems and etiology changes. With the idea of critical care medicine as the soul, it can integrate the above information and clinical information, bedside real-time diagnosis and titration treatment, and evaluate the therapeutic effect so as to improve the outcome. CUS is a traditional technique which is applied as a new application method. The consensus of experts on critical ultrasonography in China released in 2016 put forward consensus suggestions on the concept, implementation and application of CUS. It should be further emphasized that the accurate and objective assessment and implementation of CUS requires the standardization of ultrasound image acquisition and the need to establish a CUS procedure. At the same time, the standardized training for CUS accepted by critical care medicine physicians requires the application of technical specifications, and the establishment of technical specifications is the basis for the quality control and continuous improvement of CUS. Chinese Critical Ultrasound Study Group and Critical Hemodynamic Therapy Collabration Group, based on the rich experience of clinical practice in critical care and research, combined with the essence of CUS, to learn the traditional ultrasonic essence, established the clinical application technical specifications of CUS, including in five parts: basic view and relevant indicators to obtain in CUS; basic norms for viscera organ assessment and special assessment; standardized processes and systematic inspection programs; examples of CUS applications; CUS training and the application of qualification certification. The establishment of applied technology standard is helpful for standardized training and clinical correct implementation. It is helpful for clinical evaluation and correct guidance treatment, and is also helpful for quality control and continuous improvement of CUS application.

  14. Determining the Effectiveness and Evaluating the Implementation Process of a Quality/Performance Circles System Model to Assist in Institutional Decision Making and Problem Solving at Lakeshore Technical Institute.

    ERIC Educational Resources Information Center

    Ladwig, Dennis J.

    During the 1982-83 school year, a quality/performance circles system model was implemented at Lakeshore Technical Institute (LTI) to promote greater participation by staff in decision making and problem solving. All management staff at the college (N=45) were invited to participate in the process, and 39 volunteered. Non-management staff (N=240)…

  15. LC Data QUEST: A Technical Architecture for Community Federated Clinical Data Sharing.

    PubMed

    Stephens, Kari A; Lin, Ching-Ping; Baldwin, Laura-Mae; Echo-Hawk, Abigail; Keppel, Gina A; Buchwald, Dedra; Whitener, Ron J; Korngiebel, Diane M; Berg, Alfred O; Black, Robert A; Tarczy-Hornoch, Peter

    2012-01-01

    The University of Washington Institute of Translational Health Sciences is engaged in a project, LC Data QUEST, building data sharing capacity in primary care practices serving rural and tribal populations in the Washington, Wyoming, Alaska, Montana, Idaho region to build research infrastructure. We report on the iterative process of developing the technical architecture for semantically aligning electronic health data in primary care settings across our pilot sites and tools that will facilitate linkages between the research and practice communities. Our architecture emphasizes sustainable technical solutions for addressing data extraction, alignment, quality, and metadata management. The architecture provides immediate benefits to participating partners via a clinical decision support tool and data querying functionality to support local quality improvement efforts. The FInDiT tool catalogues type, quantity, and quality of the data that are available across the LC Data QUEST data sharing architecture. These tools facilitate the bi-directional process of translational research.

  16. LC Data QUEST: A Technical Architecture for Community Federated Clinical Data Sharing

    PubMed Central

    Stephens, Kari A.; Lin, Ching-Ping; Baldwin, Laura-Mae; Echo-Hawk, Abigail; Keppel, Gina A.; Buchwald, Dedra; Whitener, Ron J.; Korngiebel, Diane M.; Berg, Alfred O.; Black, Robert A.; Tarczy-Hornoch, Peter

    2012-01-01

    The University of Washington Institute of Translational Health Sciences is engaged in a project, LC Data QUEST, building data sharing capacity in primary care practices serving rural and tribal populations in the Washington, Wyoming, Alaska, Montana, Idaho region to build research infrastructure. We report on the iterative process of developing the technical architecture for semantically aligning electronic health data in primary care settings across our pilot sites and tools that will facilitate linkages between the research and practice communities. Our architecture emphasizes sustainable technical solutions for addressing data extraction, alignment, quality, and metadata management. The architecture provides immediate benefits to participating partners via a clinical decision support tool and data querying functionality to support local quality improvement efforts. The FInDiT tool catalogues type, quantity, and quality of the data that are available across the LC Data QUEST data sharing architecture. These tools facilitate the bi-directional process of translational research. PMID:22779052

  17. 78 FR 15664 - Approval and Promulgation of Air Quality Implementation Plans; New Mexico; Interstate Transport...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-12

    ... technical analysis supporting New Mexico's conclusion as recommended by EPA's guidance memorandum that... modeling technical analyses are available, but EPA does not believe that modeling is necessarily required...)(2)(D)(i)(I) for the 2006 PM 2.5 NAAQS in several ways. It takes into account the technical analysis...

  18. 76 FR 4579 - Approval and Promulgation of Air Quality Implementation Plan; New Jersey and New York...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-26

    ... supported by an adequate technical analysis. EPA recommended the various types of information that could be...) must be supported by an adequate technical analysis. In the 2009 Guidance, EPA recommended the various...) because the State did not evaluate or demonstrate with a technical analysis that the emissions reduction...

  19. 76 FR 4584 - Approval and Promulgation of Air Quality Implementation Plans; Georgia; Disapproval of Interstate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-26

    ... conclusion must be supported by an adequate technical analysis. Second, EPA recommended the various types of... requirement of section 110(a)(2)(D)(i)(I) must be supported by an adequate technical analysis. Additionally... evaluate or demonstrate with a technical analysis that this measure and their intention to rely to the...

  20. Evaluation of Factors that Contribute to Improving Academic Achievement of Career and Technical Education Students in Rhode Island

    ERIC Educational Resources Information Center

    Marsella, Anthony J.

    2010-01-01

    The primary purpose of this study was to gain a deeper understanding of career and technical education in Rhode Island utilizing Program Approval Process: Standards, Instruments, and Protocols. The process establishes standards for quality career and technical education. The population surveyed provided data on Standard Two: Curriculum and…

  1. Radiographic technical quality of root canal treatment performed ex vivo by dental students at Valencia University Medical and Dental School, Spain

    PubMed Central

    Faus-Matoses, Vicente; Alegre-Domingo, Teresa; Faus-Llácer, Vicente J.

    2014-01-01

    Objectives: To evaluate radiographically the quality of root canal fillings and compare manual and rotary preparation performed on extracted teeth by undergraduate dental students. Study Design: A total of 561 premolars and molars extracted teeth were prepared using nickel-titanium rotary files or manual instrumentation and filled with gutta-percha using a cold lateral condensation technique, by 4th grade undergraduate students. Periapical radiographs were used to assess the technical quality of the root canal filling, evaluating three variables: length, density and taper. These data were recorded, scored and used to study the “technical success rate” and the “overall score”. The length of each root canal filling was classified as acceptable, short and overfilled, based on their relationship with the radiographic apex. Density and taper of filling were evaluated based on the presence of voids and the uniform tapering of the filling, respectively. Statistical analysis was used to evaluate the quality of root canal treatment, considering p < 0.05 as a statistical significant level. Results: The percentage of technical success was 44% and the overall score was 7.8 out of 10. Technical success and overall score were greater with rotary instruments (52% against 28% with a manual one, p < 0.001; 8.3 against 6.7 respectively, p < 0.001). Conclusions: It appears that inexperienced operators perform better root canal treatment (RCT) with the use of rotary instrumentation. Key words:Dental education, endodontics, rotary instrumentation, radiographs, root canal treatment, undergraduate students. PMID:24121911

  2. Technical proficiency in cytopathology: assessment through external quality assurance.

    PubMed

    Cummings, M C; Greaves, J; Shukor, R A; Perkins, G; Ross, J

    2017-04-01

    To assess both the feasibility and value of conducting an external quality assurance programme concerning technical aspects of cytopathology laboratory practice, and the interest by laboratories in enrolling in such a programme. Six technical surveys, comprising staining exercises and questionnaires relating to laboratory practice, were distributed over a 4-year period to the approximately 220 laboratories enrolled in the RCPAQAP Cytopathology slide survey modules. Staining exercises using the Papanicolaou and Romanowsky techniques, the preparation of urine and body fluid specimens and immunocytochemistry on the cell block material were assessed. Accompanying relevant questionnaires were included, and one survey comprised a questionnaire alone concerning the collection of urinary tract and body fluid samples. Provision of an external cytopathology technical module was feasible for the RCPAQAP and participation rates (maximum of 87% per survey; average 68% for stained slides and 66% for questionnaires) were commendable, particularly considering these were optional undertakings with some exercises not applicable to all laboratories. The great majority of submitted slides were scored as satisfactory, and there was an especially high standard for the immunocytochemical staining exercise with 95% considered satisfactory, including 50.6% with a perfect score. Reasons for suboptimal scores were provided for potential quality improvement for interested laboratories. A wealth of information relating to laboratory practice was provided to the RCPAQAP which was collated and summarised for laboratory use. The provision of a technical module in cytopathology is both a feasible and valuable undertaking of interest to laboratories which should become standard practice for cytopathology external quality assurance providers. © 2016 John Wiley & Sons Ltd.

  3. [Quality assurance systems and occupational medicine system: an history twenty years along].

    PubMed

    Apostoli, Pietro

    2014-01-01

    Along the last tventy years, in our country the quality assurance systems and the occupational medicine deeply interacted both in theoretical and practical fields of interest at three levels: (i) the need of preventive and therefore of occupational medicine in quality assurance systems; (ii) the need on reverse of quality in prevention and occupational mnedicine mainly in qualification and updating process; (iii) the evidence, proofs of efficacy or appropriateness of different preventive procedures and occupational physician activities; (iv) the connection with European and national legal directives and with technical or good practice norms. Finally we discuss about the role of occupational physician as the global consultant for enterprise, as a mandatory strategic technical figure in a typical multidisciplinary processes as the implementation of the quality systems.

  4. Quality in End User Documentation.

    ERIC Educational Resources Information Center

    Morrison, Ronald

    1994-01-01

    Discusses quality in end-user documentation for computer applications and explains four approaches to improving quality in end-user documents. Highlights include online help, usability testing, technical writing elements, statistical approaches, and concepts relating to software quality that are also applicable to user manuals. (LRW)

  5. Can branding by health care provider organizations drive the delivery of higher technical and service quality?

    PubMed

    Snihurowych, Roman R; Cornelius, Felix; Amelung, Volker Eric

    2009-01-01

    Despite the widespread use of branding in nearly all other major industries, most health care service delivery organizations have not fully embraced the practices and processes of branding. Facilitating the increased and appropriate use of branding among health care delivery organizations may improve service and technical quality for patients. This article introduces the concepts of branding, as well as making the case that the use of branding may improve the quality and financial performance of organizations. The concepts of branding are reviewed, with examples from the literature used to demonstrate their potential application within health care service delivery. The role of branding for individual organizations is framed by broader implications for health care markets. Branding strategies may have a number of positive effects on health care service delivery, including improved technical and service quality. This may be achieved through more transparent and efficient consumer choice, reduced costs related to improved patient retention, and improved communication and appropriateness of care. Patient satisfaction may be directly increased as a result of branding. More research into branding could result in significant quality improvements for individual organizations, while benefiting patients and the health system as a whole.

  6. TECHNICAL GUIDANCE DOCUMENT: THE FABRICATION OF POLYETHYLENE FML FIELD SEAMS

    EPA Science Inventory

    This technical guidance document is meant to augment the numerous construction quality control and construction assurance (CQC and CQA) guidelines that are presently available for high density polyethylene (HDPE) liner installation and inspection.

  7. Technical Highlight: NREL Improves Building Energy Simulation Programs Through Diagnostic Testing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Polly, B.

    2012-01-09

    This technical highlight describes NREL research to develop Building Energy Simulation Test for Existing Homes (BESTEST-EX) to increase the quality and accuracy of energy analysis tools for the building retrofit market.

  8. 14 CFR 183.25 - Technical personnel examiners.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... § 183.25 Technical personnel examiners. (a) A designated mechanic examiner (DME) (airframe and power plant) may— (1) Accept applications for, and conduct, mechanic, oral and practical tests necessary for issuing mechanic certificates under part 65 of this chapter; and (2) In the discretion of the appropriate...

  9. 14 CFR 183.25 - Technical personnel examiners.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... § 183.25 Technical personnel examiners. (a) A designated mechanic examiner (DME) (airframe and power plant) may— (1) Accept applications for, and conduct, mechanic, oral and practical tests necessary for issuing mechanic certificates under part 65 of this chapter; and (2) In the discretion of the appropriate...

  10. 14 CFR 183.25 - Technical personnel examiners.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... § 183.25 Technical personnel examiners. (a) A designated mechanic examiner (DME) (airframe and power plant) may— (1) Accept applications for, and conduct, mechanic, oral and practical tests necessary for issuing mechanic certificates under part 65 of this chapter; and (2) In the discretion of the appropriate...

  11. 14 CFR 183.25 - Technical personnel examiners.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... § 183.25 Technical personnel examiners. (a) A designated mechanic examiner (DME) (airframe and power plant) may— (1) Accept applications for, and conduct, mechanic, oral and practical tests necessary for issuing mechanic certificates under part 65 of this chapter; and (2) In the discretion of the appropriate...

  12. 14 CFR 183.25 - Technical personnel examiners.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... § 183.25 Technical personnel examiners. (a) A designated mechanic examiner (DME) (airframe and power plant) may— (1) Accept applications for, and conduct, mechanic, oral and practical tests necessary for issuing mechanic certificates under part 65 of this chapter; and (2) In the discretion of the appropriate...

  13. DKIST visible broadband imager data processing pipeline

    NASA Astrophysics Data System (ADS)

    Beard, Andrew; Cowan, Bruce; Ferayorni, Andrew

    2014-07-01

    The Daniel K. Inouye Solar Telescope (DKIST) Data Handling System (DHS) provides the technical framework and building blocks for developing on-summit instrument quality assurance and data reduction pipelines. The DKIST Visible Broadband Imager (VBI) is a first light instrument that alone will create two data streams with a bandwidth of 960 MB/s each. The high data rate and data volume of the VBI require near-real time processing capability for quality assurance and data reduction, and will be performed on-summit using Graphics Processing Unit (GPU) technology. The VBI data processing pipeline (DPP) is the first designed and developed using the DKIST DHS components, and therefore provides insight into the strengths and weaknesses of the framework. In this paper we lay out the design of the VBI DPP, examine how the underlying DKIST DHS components are utilized, and discuss how integration of the DHS framework with GPUs was accomplished. We present our results of the VBI DPP alpha release implementation of the calibration, frame selection reduction, and quality assurance display processing nodes.

  14. Radiation dose-reduction strategies in thoracic CT.

    PubMed

    Moser, J B; Sheard, S L; Edyvean, S; Vlahos, I

    2017-05-01

    Modern computed tomography (CT) machines have the capability to perform thoracic CT for a range of clinical indications at increasingly low radiation doses. This article reviews several factors, both technical and patient-related, that can affect radiation dose and discusses current dose-reduction methods relevant to thoracic imaging through a review of current techniques in CT acquisition and image reconstruction. The fine balance between low radiation dose and high image quality is considered throughout, with an emphasis on obtaining diagnostic quality imaging at the lowest achievable radiation dose. The risks of excessive radiation dose reduction are also considered. Inappropriately low dose may result in suboptimal or non-diagnostic imaging that may reduce diagnostic confidence, impair diagnosis, or result in repeat examinations incurring incremental ionising radiation exposure. Copyright © 2016 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

  15. Video requirements for remote medical diagnosis

    NASA Technical Reports Server (NTRS)

    Davis, J. G.

    1974-01-01

    Minimal television system requirements for medical telediagnosis were studied. The experiment was conducted with the aid of a simulated telemedicine system. The first step involved making high quality videotape recordings of actual medical examinations conducted by a skilled nurse under the direction of a physician watching on closed circuit television. These recordings formed the baseline for the study. Next, these videotape recordings were electronically degraded to simulate television systems of less than broadcast quality. Finally, the baseline and degraded video recordings were shown (via a statistically randomized procedure) to a large number of physicians who attempted to reach a correct medical diagnosis and to visually recognize key physical signs for each patient. By careful scoring and analysis of the results of these viewings, the pictorial and diagnostic limitations as a function of technical video characteristics were to be defined.

  16. Increasing the technical level of mining haul trucks

    NASA Astrophysics Data System (ADS)

    Voronov, Yuri; Voronov, Artyom; Grishin, Sergey; Bujankin, Alexey

    2017-11-01

    Theoretical and methodological fundamentals of mining haul trucks optimal design are articulated. Methods based on the systems approach to integrated assessment of truck technical level and methods for optimization of truck parameters depending on performance standards are provided. The results of using these methods are given. The developed method allows not only assessing the truck technical levels but also choosing the most promising models and providing quantitative evaluations of the decisions to be made at the design stage. These areas are closely connected with the problem of improvement in the industrial output quality, which, being a part of the widely spread in Western world "total quality control" ideology, is one of the major issues for the Russian economy.

  17. Analysis of the Parameters Required for Performance Monitoring and Assessment of Military Communications Systems by Military Technical Controller

    DTIC Science & Technology

    1975-12-01

    139 APPENDIX A* BASIC CONCEPT OF MILITARY TECHNICAL CONTROL.142 6 APIENDIX Es TEST EQUIPMENI REQUIRED FOR lEASURF.4ENr OF 1AF’AMETE RS...Control ( SATEC ) Automatic Facilities heport Army Automated Quality Monitoring Reporting System (AQMPS) Army Autcmated Technical Control-Semi (ATC-Semi...technical control then beco.. es equipment status monitoring. All the major equipment in a system wculd have internal sensors with properly selected parameters

  18. 7 CFR 652.7 - Quality assurance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Quality assurance. 652.7 Section 652.7 Agriculture... AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.7 Quality assurance. (a) NRCS will review, in consultation with the Farm Service Agency, as appropriate, the quality...

  19. Impact of Professional Nursing Tutors on National Council Licensure Examination Success

    ERIC Educational Resources Information Center

    Mondeik, Shelly L.

    2014-01-01

    This mixed-methods study examined the impact of professional nursing tutors on National Council Licensure Examination (NCLEX) success. Thirty-eight nursing student success rates from Northcentral Technical College, a two year technical college in Wisconsin, were analyzed by using NCLEX pass rate information, professional tutoring logs, and a…

  20. [Implementation of the technical requirements of the UNE-EN-ISO 15189 quality standard in a mycobacterial laboratory].

    PubMed

    Guna Serrano, M del Remedio; Ocete Mochón, M Dolores; Lahiguera, M José; Bresó, M Carmen; Gimeno Cardona, Concepción

    2013-02-01

    The UNE-EN-ISO 15189:2007 standard defines the requirements for quality and competence that must be met by medical laboratories. These laboratories should use this international standard to develop their own quality management systems and to evaluate their own competencies; in turn, this standard will be used by accreditation bodies to confirm or recognize the laboratories' competence. In clinical microbiology laboratories, application of the standard implies the implementation of the technical and specific management requirements that must be met to achieve optimal quality when carrying out microbiological tests. In Spain, accreditation is granted by the Spanish Accreditation Body (Entidad Nacional de Acreditación). This review aims to discuss the practical application of the standard's technical requirements in mycobacterial laboratory. Firstly, we define the scope of accreditation. Secondly, we specify how the items of the standard on personnel management, control of equipment, environmental facilities, method validation, internal controls and customer satisfaction surveys were developed and implemented in our laboratory. Copyright © 2013 Elsevier España, S.L. All rights reserved.

  1. Technicism, Teachers and Teaching Quality in Vocational Education and Training.

    ERIC Educational Resources Information Center

    Hodkinson, Phil

    1998-01-01

    Post-Fordist notions of people as the most important organizational resource are congruent with teacher professionalism. However, government vocational education policies are dominated by technical rationalism, which treats teachers as technicians to be controlled. (SK)

  2. 2005 v4.3 Technical Support Document

    EPA Pesticide Factsheets

    Emissions Modeling for the Final Mercury and Air Toxics Standards Technical Support Document describes how updated 2005 NEI, version 2 emissions were processed for air quality modeling in support of the final Mercury and Air Toxics Standards (MATS).

  3. Utah's 1988-93 Vocational-Technical Education Master Plan: A Powerful Resource for Human and Economic Development.

    ERIC Educational Resources Information Center

    Utah State Board of Higher Education, Salt Lake City.

    For Utah residents to remain in the forefront or even stay competitive economically, the state's work force must acquire the knowledge and skills that match or exceed those of their most technically advanced competitors. A powerful engine for economic growth is a high-quality system of vocational-technical education. The majority of Utah public…

  4. Roadmap to Perkins III: The Carl D. Perkins Vocational and Technical Education Act of 1998. A Guidebook for Illinois.

    ERIC Educational Resources Information Center

    Hess-Grabill, Donella; Bueno, Soyon

    This guidebook is intended as a road map to the Carl D. Perkins Vocational Technical Education Act of 1998 (Perkins III) for career-technical education (CTE) practitioners and policymakers in Illinois. The following topics are among those covered: (1) framework for Perkins III (national educational reform, Illinois provisions for quality CTE,…

  5. The Council for Programs in Technical and Scientific Communication Proceedings (6th, Stillwater, Oklahoma, April 26-27, 1979).

    ERIC Educational Resources Information Center

    Warren, Thomas, Ed.

    Articles in these proceedings of a conference of the Council for Programs in Technical and Scientific Communication represent the views of professional communicators and academicians who share a concern for providing breadth and quality of preparation of present and future technical communicators. The 11 articles discuss the following topics: (1)…

  6. Quality Rating Systems--The Experiences of Center Directors

    ERIC Educational Resources Information Center

    Friedman, Dana E.

    2007-01-01

    Quality Rating System (QRS) initiatives define levels of quality based on research and then support providers with funding and technical assistance to increase their quality. Each program is assessed and given a number of "stars" to indicate to parents what level of quality the program has reached. In this article, the author describes…

  7. Revisiting the utility of technical performance scores following tetralogy of Fallot repair.

    PubMed

    Lodin, Daud; Mavrothalassitis, Orestes; Haberer, Kim; Sunderji, Sherzana; Quek, Ruben G W; Peyvandi, Shabnam; Moon-Grady, Anita; Karamlou, Tara

    2017-08-01

    Although an important quality metric, current technical performance scores may not be generalizable and may omit operative factors that influence outcomes. We examined factors not included in current technical performance scores that may contribute to increased postoperative length of stay, major complications, and cost after primary repair of tetralogy of Fallot. This is a retrospective single site study of patients younger than age 2 years with tetralogy of Fallot undergoing complete repair between 2007 and 2015. Medical record data and discharge echocardiograms were reviewed to ascertain component and composite technical performance scores. Primary outcomes included postoperative length of stay, major complications, and total hospital costs. Multivariable logistic and linear regression identified determinants of each outcome. Patient population (n = 115) had a median postoperative length of stay of 8 days (interquartile range, 6-10 days), and a median total cost of $71,147. Major complications occurred in 33 patients (29%) with 1 death. Technical performance scores assigned were optimum in 28 patients (25%), adequate in 59 patients (52%), and inadequate in 26 patients (23%). Neither technical performance score components nor composite scores were associated with increased postoperative length of stay. Optimum or adequate repairs versus inadequate had equal risk of a complication (P = .79), and equivalent mean total cost ($100,000 vs $187,000; P = .25). Longer cardiopulmonary bypass time per 1-minute increase (P < .01) was associated with longer postoperative length of stay and reintervention (P = .02). The need to return to bypass also increased total cost (P < .01). Current tetralogy of Fallot technical performance scores were not associated with selected outcomes in our postoperative population. Although returning to bypass and bypass length are not included as components in the current score, these are important factors influencing complications and resource use in our population. Revisions anticipated from a prospective trial should consider including these variables. Copyright © 2017 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

  8. Developing a Total Quality Improvement Course for the Preparation of Technical-Management Personnel.

    ERIC Educational Resources Information Center

    Zargari, Ahmad

    1997-01-01

    Presents information about the need for, planning, and implementation of a total quality improvement course for undergraduate technology education students. The course involves the study of total quality concepts and their impact on the quality and competitiveness of industrial products. (JOW)

  9. Environmental Engineering Curricula assessment in the global world

    NASA Astrophysics Data System (ADS)

    Caporali, Enrica; Catelani, Marcantonio; Manfrida, Giampaolo; Valdiserri, Juna

    2014-05-01

    Environmental engineers are technicians with specific expertise on the sustainability of human presence in the environment. Among other global dilemmas, to the environmental engineers it is often demanded to be able in developing systematic, innovative solutions in order to simultaneously meet water and energy needs, to build resilience to natural and technological disasters, to more accurately gauge and manage countries' greenhouse gas emissions. The general objectives of the Environmental Engineers are to establish actions of environmental sustainability as well as to verify progress toward global goals or international commitments. The globalization of challenges and problems to be faced, leads, in general, to the globalization of the engineering profession. In particular, since the environmental issues are without boundaries, and many and different are the involved professions and the competences, the environmental engineer must have a multidisciplinary and interdisciplinary approach to adequately answer to the demand of technical innovative knowledge at global scale. The environmental engineers, more and more, are involved in international projects were the effective collaboration requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. The Europe-based EUR ACE system, currently operated by ENAEE - European Network for Accreditation of Engineering Education, can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. In the global frame of the knowledge triangle: education-innovation-research, the accreditation and quality assurance of engineering curricula in Europe is discussed with reference to the Environmental engineering curricula, of the 1st and 2nd cycle, based on the European Credit Transfer System and in accordance with the Bologna Process, offered at School of Engineering, University of Firenze. The application of the accreditation model EUR-ACE to the multidisciplinary first cycle degree in Civil, Building and Environmental Engineering and the more specific second cycle degree in Environmental Engineering is discussed. Particularly, the critical issues to guarantee the quality and the status of environmental engineering graduates, in terms of applying knowledge capacities and technical innovative competences are examined. The expected learning outcomes of the quality assessment according the Dublin descriptors or the more engineering focused EUR-ACE skill descriptors, and at local and global scale are analysed. The system for educating engineers in communicating knowledge and understanding, making informed judgments and choices, capacities to lifelong learning is also assessed. The involvement of the professional working world in the definition of goals in skills, of typical expectations of achievements and abilities, and in general in comparing the teaching profile with the actual needs of the technical workforce, is described. With the aim to promote the innovative aspects related with the environmental engineering education, the important role that science and technology could play is also taken into consideration.

  10. The technical editing internship: What makes it work

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Caruthers, C.M.; Caruthers, L.E.; Schmidt, B.J.

    1988-01-01

    The following paper presents the experiences and perceptions of the three main participants of a technical editing internship at Argonne National Laboratory during the summer of 1986. Linda Caruthers, Clifford Caruthers, and Bryan Schmidt/emdash/teacher, supervisor, and intern, respectively/emdash/share what they received as their roles and responsibilities in guiding, managing, and becoming an entry-level technical editor. The following discussions demonstrate how the efforts of three people pursuing different objectives achieve the primary goal of all technical writers and editors: high-quality publications.

  11. Non-technical skills evaluation in the critical care air ambulance environment: introduction of an adapted rating instrument--an observational study.

    PubMed

    Myers, Julia A; Powell, David M C; Psirides, Alex; Hathaway, Karyn; Aldington, Sarah; Haney, Michael F

    2016-03-08

    In the isolated and dynamic health-care setting of critical care air ambulance transport, the quality of clinical care is strongly influenced by non-technical skills such as anticipating, recognising and understanding, decision making, and teamwork. However there are no published reports identifying or applying a non-technical skills framework specific to an intensive care air ambulance setting. The objective of this study was to adapt and evaluate a non-technical skills rating framework for the air ambulance clinical environment. In the first phase of the project the anaesthetists' non-technical skills (ANTS) framework was adapted to the air ambulance setting, using data collected directly from clinician groups, published literature, and field observation. In the second phase experienced and inexperienced inter-hospital transport clinicians completed a simulated critical care air transport scenario, and their non-technical skills performance was independently rated by two blinded assessors. Observed and self-rated general clinical performance ratings were also collected. Rank-based statistical tests were used to examine differences in the performance of experienced and inexperienced clinicians, and relationships between different assessment approaches and assessors. The framework developed during phase one was referred to as an aeromedical non-technical skills framework, or AeroNOTS. During phase two 16 physicians from speciality training programmes in intensive care, emergency medicine and anaesthesia took part in the clinical simulation study. Clinicians with inter-hospital transport experience performed more highly than those without experience, according to both AeroNOTS non-technical skills ratings (p = 0.001) and general performance ratings (p = 0.003). Self-ratings did not distinguish experienced from inexperienced transport clinicians (p = 0.32) and were not strongly associated with either observed general performance (r(s) = 0.4, p = 0.11) or observed non-technical skills performance (r(s) = 0.4, p = 0.1). This study describes a framework which characterises the non-technical skills required by critical care air ambulance clinicians, and distinguishes higher and lower levels of performance. The AeroNOTS framework could be used to facilitate education and training in non-technical skills for air ambulance clinicians, and further evaluation of this rating system is merited.

  12. Creating an Overall Environmental Quality Index - Technical Report

    EPA Science Inventory

    A better estimate of overall environmental quality is needed to improve our understanding of the relationship between environmental conditions and humanhealth. Described in this report is the effort to construct an environmental quality index representing multiple domains of the ...

  13. Communication Sciences and Health Sciences.

    ERIC Educational Resources Information Center

    Lane, Shelley D.

    1981-01-01

    Technical skills and interpersonal communication contribute to diagnosing diseases, and evidence suggests that the quality of the interpersonal relationship can significantly influence the outcome of treatments that appear to depend solely on technical factors. Because communication directly influences health-related outcomes, communication…

  14. 77 FR 16447 - Approval and Promulgation of Implementation Plans; Designation of Areas for Air Quality Planning...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-21

    ...: These technical amendments are effective on March 21, 2012. FOR FURTHER INFORMATION CONTACT: Doris Lo, EPA Region IX, (415) 972- 3959, lo[email protected] . SUPPLEMENTARY INFORMATION: Technical Amendment for...

  15. Automated water monitor system field demonstration test report. Volume 2: Technical summary

    NASA Technical Reports Server (NTRS)

    Brooks, R. L.; Jeffers, E. L.; Perreira, J.; Poel, J. D.; Nibley, D.; Nuss, R. H.

    1981-01-01

    The NASA Automatic Water Monitor System was installed in a water reclamation facility to evaluate the technical and cost feasibility of producing high quality reclaimed water. Data gathered during this field demonstration test are reported.

  16. Improving Depression Care for Adults With Serious Mental Illness in Underresourced Areas: Community Coalitions Versus Technical Support.

    PubMed

    Castillo, Enrico G; Shaner, Roderick; Tang, Lingqi; Chung, Bowen; Jones, Felica; Whittington, Yolanda; Miranda, Jeanne; Wells, Kenneth B

    2018-02-01

    Community Partners in Care (CPIC) was a group-randomized study of two approaches to implementing expanded collaborative depression care: Community Engagement and Planning (CEP), a coalition approach, and Resources for Services (RS), a technical assistance approach. Collaborative care networks in both arms involved health care and other agencies in five service sectors. This study examined six- and 12-month outcomes for CPIC participants with serious mental illness. This secondary analysis focused on low-income CPIC participants from racial-ethnic minority groups with serious mental illness in underresourced Los Angeles communities (N=504). Serious mental illness was defined as self-reported severe depression (≥20 on the Patient Health Questionnaire-8) at baseline or a lifetime history of bipolar disorder or psychosis. Logistic and Poisson regression with multiple imputation and response weights, controlling for covariates, was used to model intervention effects. Among CPIC participants, 50% had serious mental illness. Among those with serious mental illness, CEP relative to RS reduced the likelihood of poor mental health-related quality of life (OR=.62, 95% CI=.41-.95) but not depression (primary outcomes); reduced the likelihood of having homelessness risk factors and behavioral health hospitalizations; increased the likelihood of mental wellness; reduced specialty mental health medication and counseling visits; and increased faith-based depression visits (each p<.05) at six months. There were no statistically significant 12-month effects. Findings suggest that a coalition approach to implementing expanded collaborative depression care, compared with technical assistance to individual programs, may reduce short-term behavioral health hospitalizations and improve mental health-related quality of life and some social outcomes for adults with serious mental illness, although no evidence was found for long-term effects in this subsample.

  17. Multicriteria Decision Analysis of Freshwater Resource Management in Southwestern Bangladesh

    NASA Astrophysics Data System (ADS)

    Peters, C.; Baroud, H.; Hornberger, G. M.

    2016-12-01

    Freshwater resources in coastal Bangladesh fluctuate with extreme periods of shortage and abundance. Bangladeshis have adapted to these alternating periods but are still plagued with scarce drinking water resources due to pond water pathogens, salinity of groundwater, and arsenic contamination. The success of attempts to correct the problem of unsafe drinking water have varied across the southern Bangladesh as a result of physical and social factors. We use a multicriteria decision analysis (MCDA) to explore the various physical and social factors that influence decisions about freshwater technologies and management schemes in southern Bangladesh. To determine the best freshwater technologies and management schemes, we examine four alternatives, including managed aquifer recharge (MAR), pond sand filter (PSF), rain water harvesting (RWH), and tubewells (TW). Criteria are grouped into four categories (environmental, technical, social, and economic) and weighting of social factors will be determined by community surveys, non-governmental organizations (NGO) opinions, and academic interviews. Social data include regional water quality perceptions, perceptions of management/technology success, MAR community surveys, and interviews with NGO partners. Environmental and technical feasibility factors are determined from regional water quality data, geospatial information, land use/land change, and regional stratigraphy. Survey data suggest a wide range of criteria based on location and stakeholder perception. MAR and PSF technologies likely have the greatest environmental and technical potential for success but are highly influenced by community dynamics, individual perspective, and NGO involvement. RWH solutions are used frequently and are successful at reducing the water security threats of contamination by pathogens, arsenic, and salts. This MCDA informs us of community and stakeholder water resource decisions, specifically related to their objectives and preferences.

  18. Technical editing of research reports in biomedical journals.

    PubMed

    Wager, Elizabeth; Middleton, Philippa

    2008-10-08

    Most journals try to improve their articles by technical editing processes such as proof-reading, editing to conform to 'house styles', grammatical conventions and checking accuracy of cited references. Despite the considerable resources devoted to technical editing, we do not know whether it improves the accessibility of biomedical research findings or the utility of articles. This is an update of a Cochrane methodology review first published in 2003. To assess the effects of technical editing on research reports in peer-reviewed biomedical journals, and to assess the level of accuracy of references to these reports. We searched The Cochrane Library Issue 2, 2007; MEDLINE (last searched July 2006); EMBASE (last searched June 2007) and checked relevant articles for further references. We also searched the Internet and contacted researchers and experts in the field. Prospective or retrospective comparative studies of technical editing processes applied to original research articles in biomedical journals, as well as studies of reference accuracy. Two review authors independently assessed each study against the selection criteria and assessed the methodological quality of each study. One review author extracted the data, and the second review author repeated this. We located 32 studies addressing technical editing and 66 surveys of reference accuracy. Only three of the studies were randomised controlled trials. A 'package' of largely unspecified editorial processes applied between acceptance and publication was associated with improved readability in two studies and improved reporting quality in another two studies, while another study showed mixed results after stricter editorial policies were introduced. More intensive editorial processes were associated with fewer errors in abstracts and references. Providing instructions to authors was associated with improved reporting of ethics requirements in one study and fewer errors in references in two studies, but no difference was seen in the quality of abstracts in one randomised controlled trial. Structuring generally improved the quality of abstracts, but increased their length. The reference accuracy studies showed a median citation error rate of 38% and a median quotation error rate of 20%. Surprisingly few studies have evaluated the effects of technical editing rigorously. However there is some evidence that the 'package' of technical editing used by biomedical journals does improve papers. A substantial number of references in biomedical articles are cited or quoted inaccurately.

  19. Performance-based financing with GAVI health system strengthening funding in rural Cambodia: a brief assessment of the impact.

    PubMed

    Matsuoka, Sadatoshi; Obara, Hiromi; Nagai, Mari; Murakami, Hitoshi; Chan Lon, Rasmey

    2014-07-01

    Though Cambodia made impressive gains in immunization coverage between the years 2000 and 2005, it recognized several health system challenges to greater coverage of immunization and sustainability. The Global Alliance for Vaccines and Immunization (GAVI) opened a Health System Strengthening (HSS) funding window in 2006. To address the health system challenges, Cambodia has been receiving the GAVI HSS fund since October 2007. The major component of the support is performance-based financing (PBF) for maternal, neonatal and child health (MNCH) services. To examine the impact of the PBF scheme on MNCH services and administrative management in rural Cambodia. Quantitative and qualitative studies were conducted in Kroch Chhmar Operational District (OD), Cambodia. Quantitative analyses were conducted on the trends of the numbers of MNCH services. A brief analysis was conducted using qualitative data. After the commencement of the PBF support, the volume of MNCH services was significantly boosted. In addition, strengthened financial and operational management was observed in the study area. However, the quality of the MNCH services was not ensured. Technical assistance, rather than the PBF scheme, was perceived by stakeholders to play a vital role in increasing the quality of the services. To improve the quality of the health services provided, it is better to include indicators on the quality of care in the PBF scheme. Mutual co-operation between PBF models and technical assistance may ensure better service quality while boosting the quantity. A robust but feasible data validation mechanism should be in place, as a PBF could incentivize inaccurate reporting. The capacity for financial management should be strengthened in PBF recipient ODs. To address the broader aspects of MNCH, a balanced input of resources and strengthening of all six building blocks of a health system are necessary. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2013; all rights reserved.

  20. Telemedicine-based system for quality management and peer review in radiology.

    PubMed

    Morozov, Sergey; Guseva, Ekaterina; Ledikhova, Natalya; Vladzymyrskyy, Anton; Safronov, Dmitry

    2018-06-01

    Quality assurance is the key component of modern radiology. A telemedicine-based quality assurance system helps to overcome the "scoring" approach and makes the quality control more accessible and objective. A concept for quality assurance in radiology is developed. Its realization is a set of strategies, actions, and tools. The latter is based on telemedicine-based peer review of 23,199 computed tomography (CT) and magnetic resonance imaging (MRI) images. The conception of the system for quality management in radiology represents a chain of actions: "discrepancies evaluation - routine support - quality improvement activity - discrepancies evaluation". It is realized by an audit methodology, telemedicine, elearning, and other technologies. After a year of systemic telemedicine-based peer reviews, the authors have estimated that clinically significant discrepancies were detected in 6% of all cases, while clinically insignificant ones were found in 19% of cases. Most often, problems appear in musculoskeletal records; 80% of the examinations have diagnostic or technical imperfections. The presence of routine telemedicine support and personalized elearning allowed improving the diagnostics quality. The level of discrepancies has decreased significantly (p < 0.05). The telemedicine-based peer review system allows improving radiology departments' network effectiveness. • "Scoring" approach to radiologists' performance assessment must be changed. • Telemedicine peer review and personalized elearning significantly decrease the number of discrepancies. • Teleradiology allows linking all primary-level hospitals to a common peer review network.

  1. 75 FR 28499 - Medical Certification Requirements as Part of the Commercial Driver's License (CDL); Technical...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-21

    ... Driver's License (CDL); Technical, Organizational, and Conforming Amendments AGENCY: Federal Motor... ``medical examiner's license or certificate number'' to refer to the number on a medical examiner's license... examiner qualifies him or her to drive. This inconsistency has been clarified in today's final rule so that...

  2. Comparative analysis of structural concrete quality assurance practices on nine nuclear power plant construction projects. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Willenbrock, J.H.; Thomas, H.R. Jr.; Burati, J.L. Jr.

    1978-06-01

    The basic objective of this research effort was to perform a comparative analysis of the Quality Assurance practices related to the structural concrete phase on nine nuclear power plant projects which are (or have been) under construction in the United States in the past ten years. This analysis identified the response of each Quality Assurance program to the applicable criteria of 10 CFR Part 50, Appendix B as well as to the pertinent regulatory requirements and industry standards. The major emphasis was placed on the construction aspects of the structural concrete phase of each project. The engineering and design aspectsmore » were examined whenever they interfaced with the construction aspects. For those aspects of the Quality Assurance system which can be considered managerial in nature (i.e., organizational relationships, types of Quality Assurance programs, corrective action procedures, etc.) an attempt has been made to present the alternative approaches that were identified. For those aspects of the Quality Assurance system which are technical in nature (i.e., the frequency of testing for slump, compressive strength, etc.) an attempt has been made to present a comparative analysis between projects and in relation to the recommended or mandated practices presented in the appropriate industry codes and standards.« less

  3. 7 CFR 634.23 - Water quality plan.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 6 2012-01-01 2012-01-01 false Water quality plan. 634.23 Section 634.23 Agriculture... AGRICULTURE LONG TERM CONTRACTING RURAL CLEAN WATER PROGRAM Participant RCWP Contracts § 634.23 Water quality plan. (a) The participant's water quality plan, developed with technical assistance by the NRCS or its...

  4. 14 CFR 21.607 - Quality system.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Quality system. 21.607 Section 21.607... PROCEDURES FOR PRODUCTS AND PARTS Technical Standard Order Approvals § 21.607 Quality system. Each applicant for or holder of a TSO authorization must establish a quality system that meets the requirements of...

  5. 7 CFR 634.14 - Review and approval of project applications.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... quality, (3) Economic, and technical feasibility to control water quality problems within the life of the... and recommending priorities, the NRCWCC will consider the following: (1) Severity of the water quality...) Effects on human health, (ii) Population benefited by improved water quality, (iii) Effects on the natural...

  6. 7 CFR 634.14 - Review and approval of project applications.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... quality, (3) Economic, and technical feasibility to control water quality problems within the life of the... and recommending priorities, the NRCWCC will consider the following: (1) Severity of the water quality...) Effects on human health, (ii) Population benefited by improved water quality, (iii) Effects on the natural...

  7. 7 CFR 634.14 - Review and approval of project applications.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... quality, (3) Economic, and technical feasibility to control water quality problems within the life of the... and recommending priorities, the NRCWCC will consider the following: (1) Severity of the water quality...) Effects on human health, (ii) Population benefited by improved water quality, (iii) Effects on the natural...

  8. 7 CFR 634.14 - Review and approval of project applications.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... quality, (3) Economic, and technical feasibility to control water quality problems within the life of the... and recommending priorities, the NRCWCC will consider the following: (1) Severity of the water quality...) Effects on human health, (ii) Population benefited by improved water quality, (iii) Effects on the natural...

  9. 7 CFR 634.14 - Review and approval of project applications.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... quality, (3) Economic, and technical feasibility to control water quality problems within the life of the... and recommending priorities, the NRCWCC will consider the following: (1) Severity of the water quality...) Effects on human health, (ii) Population benefited by improved water quality, (iii) Effects on the natural...

  10. Quality/Performance Circles Three Years after Implementation.

    ERIC Educational Resources Information Center

    Ladwig, Dennis J.

    An overview is provided of the development of quality/performance circles at Lakeshore Technical Institute (LTI), Wisconsin, and of the projects undertaken through the quality/performance circle program during its 3-year history. First, background information is provided on the use of quality circles in Japan and the United States, including…

  11. Nuclear Technology Series. Course 14: Introduction to Quality Assurance/Quality Control.

    ERIC Educational Resources Information Center

    Technical Education Research Center, Waco, TX.

    This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

  12. EVALUATING POINT-NONPOINT SOURCE WATER QUALITY TRADING IN A RARITAN RIVER BASIN SUB-WATERSHED

    EPA Science Inventory

    This project addresses water quality issues in the Raritan River Basin of New Jersey. It will build upon an existing study that determined the technical feasibility of implementing a point-nonpoint source water quality trading program in the Basin. Water quality trading is ...

  13. 7 CFR 634.23 - Water quality plan.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 6 2013-01-01 2013-01-01 false Water quality plan. 634.23 Section 634.23 Agriculture... AGRICULTURE LONG TERM CONTRACTING RURAL CLEAN WATER PROGRAM Participant RCWP Contracts § 634.23 Water quality plan. (a) The participant's water quality plan, developed with technical assistance by the NRCS or its...

  14. 7 CFR 634.23 - Water quality plan.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 6 2014-01-01 2014-01-01 false Water quality plan. 634.23 Section 634.23 Agriculture... AGRICULTURE LONG TERM CONTRACTING RURAL CLEAN WATER PROGRAM Participant RCWP Contracts § 634.23 Water quality plan. (a) The participant's water quality plan, developed with technical assistance by the NRCS or its...

  15. Quality Enhancement: An Overview. Program Services Papers.

    ERIC Educational Resources Information Center

    North Carolina Partnership for Children, Raleigh.

    Leading a series of in-depth technical assistance papers on improving the quality in early care and education programs, this brochure is designed to help local communities consider the most effective strategies in designing and implementing programs that improve child care quality. A quality enhancement approach is taken whereby communities begin…

  16. The Radiologist Is in, but Was it Worth the Wait? Radiology Resident Note Quality in an Outpatient Interventional Radiology Clinic.

    PubMed

    Abboud, Salim E; Soriano, Stephanie; Abboud, Rayan; Patel, Indravadan; Davidson, Jon; Azar, Nami R; Nakamoto, Dean A

    Preprocedural evaluation of patients in an interventional radiology (IR) clinic is a complex synthesis of physical examination and imaging findings, and as IR transitions to an independent clinical specialty, such evaluations will become an increasingly critical component of a successful IR practice and quality patient care. Prior research suggests that preprocedural evaluations increased patient's perceived quality of care and may improve procedural technical success rates. Appropriate documentation of a preprocedural evaluation in the medical record is also paramount for an interventional radiologist to add value and function as an effective member of a larger IR service and multidisciplinary health care team. The purpose of this study is to examine the quality of radiology resident notes for patients seen in an outpatient IR clinic at a single academic medical center before and after the adoption of clinic note template with reminders to include platelet count, international normalized ratio, glomerular filtration rate, and plan for periprocedural coagulation status. Before adoption of the template, platelet count, international normalized ratio, glomerular filtration rate and an appropriate plan for periprocedural coagulation status were documented in 72%, 82%, 42%, and 33% of patients, respectively. After adoption of the template, appropriate documentation of platelet count, international normalized ratio, and glomerular filtration rate increased to 96%, and appropriate plan for periprocedural coagulation status was documented in 83% of patients. Patient evaluation and clinical documentation skills may not be adequately practiced during radiology residency, and tools such as templates may help increase documentation quality by radiology residents. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Coordinating Council. Fifth Meeting: Quality

    NASA Technical Reports Server (NTRS)

    1991-01-01

    This NASA Scientific and Technical Information Program Coordinating Council meeting had a theme of Quality. Four presentations were made with the following titles: How much quality can you pay for?, What the Center for AeroSpace Information has done to improve quality, Quality from the user standpoint, and Database quality: user views test producer perception. Visuals as well as discussion summaries are also included.

  18. An Evaluation of the Science Education Component of the Cross River State Science and Technical Education Project

    ERIC Educational Resources Information Center

    Ekuri, Emmanuel Etta

    2012-01-01

    The Cross River State Science and Technical Education Project was introduced in 1992 by edict number 9 of 20 December 1991, "Cross River State Science and Technical Education Board Edit, 20 December, 1991", with the aim of improving the quality of science teaching and learning in the state. As the success of the project depends…

  19. [Digital breast tomosynthesis : technical principles, current clinical relevance and future perspectives].

    PubMed

    Hellerhoff, K

    2010-11-01

    In recent years digital full field mammography has increasingly replaced conventional film mammography. High quality imaging is guaranteed by high quantum efficiency and very good contrast resolution with optimized dosing even for women with dense glandular tissue. However, digital mammography remains a projection procedure by which overlapping tissue limits the detectability of subtle alterations. Tomosynthesis is a procedure developed from digital mammography for slice examination of breasts which eliminates the effects of overlapping tissue and allows 3D imaging of breasts. A curved movement of the X-ray tube during scanning allows the acquisition of many 2D images from different angles. Subseqently, reconstruction algorithms employing a shift and add method improve the recognition of details at a defined level and at the same time eliminate smear artefacts due to overlapping structures. The total dose corresponds to that of conventional mammography imaging. The technical procedure, including the number of levels, suitable anodes/filter combinations, angle regions of images and selection of reconstruction algorithms, is presently undergoing optimization. Previous studies on the clinical value of tomosynthesis have examined screening parameters, such as recall rate and detection rate as well as information on tumor extent for histologically proven breast tumors. More advanced techniques, such as contrast medium-enhanced tomosynthesis, are presently under development and dual-energy imaging is of particular importance.

  20. Features and limitations of mobile tablet devices for viewing radiological images.

    PubMed

    Grunert, J H

    2015-03-01

    Mobile radiological image display systems are becoming increasingly common, necessitating a comparison of the features of these systems, specifically the operating system employed, connection to stationary PACS, data security and rang of image display and image analysis functions. In the fall of 2013, a total of 17 PACS suppliers were surveyed regarding the technical features of 18 mobile radiological image display systems using a standardized questionnaire. The study also examined to what extent the technical specifications of the mobile image display systems satisfy the provisions of the Germany Medical Devices Act as well as the provisions of the German X-ray ordinance (RöV). There are clear differences in terms of how the mobile systems connected to the stationary PACS. Web-based solutions allow the mobile image display systems to function independently of their operating systems. The examined systems differed very little in terms of image display and image analysis functions. Mobile image display systems complement stationary PACS and can be used to view images. The impacts of the new quality assurance guidelines (QS-RL) as well as the upcoming new standard DIN 6868 - 157 on the acceptance testing of mobile image display units for the purpose of image evaluation are discussed. © Georg Thieme Verlag KG Stuttgart · New York.

  1. Technical Communication, Knowledge Management, and XML.

    ERIC Educational Resources Information Center

    Applen, J. D.

    2002-01-01

    Describes how technical communicators can become involved in knowledge management. Examines how technical communicators can teach organizations to design, access, and contribute to databases; alert them to new information; and facilitate trust and sharing. Concludes that successful technical communicators would do well to establish a culture that…

  2. Source Emissions in Multipollutant Air Quality Management

    EPA Science Inventory

    Human activities and natural processes that emit pollutants into the ambient atmosphere are the underlying cause of all air quality problems. In a technical sense, we refer to these activities and processes as pollutant sources. Although air quality management is usually concerne...

  3. Air Quality Modeling

    EPA Pesticide Factsheets

    In this technical support document (TSD) EPA describes the air quality modeling performed to support the Environmental Protection Agency’s Transport Rule proposal (now known as the Cross-State Air Pollution Rule).

  4. 77 FR 40026 - 36(b)(1) Arms Sales Notification

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-06

    ... and contractor logistics, Quality Assurance Team support services, engineering and technical support..., engineering and technical support, and other related elements of program support. The estimated cost is $49..., maintenance, or training is Confidential. Reverse engineering could reveal Confidential information...

  5. Cost and technical efficiency of physician practices: a stochastic frontier approach using panel data.

    PubMed

    Heimeshoff, Mareike; Schreyögg, Jonas; Kwietniewski, Lukas

    2014-06-01

    This is the first study to use stochastic frontier analysis to estimate both the technical and cost efficiency of physician practices. The analysis is based on panel data from 3,126 physician practices for the years 2006 through 2008. We specified the technical and cost frontiers as translog function, using the one-step approach of Battese and Coelli to detect factors that influence the efficiency of general practitioners and specialists. Variables that were not analyzed previously in this context (e.g., the degree of practice specialization) and a range of control variables such as a patients' case-mix were included in the estimation. Our results suggest that it is important to investigate both technical and cost efficiency, as results may depend on the type of efficiency analyzed. For example, the technical efficiency of group practices was significantly higher than that of solo practices, whereas the results for cost efficiency differed. This may be due to indivisibilities in expensive technical equipment, which can lead to different types of health care services being provided by different practice types (i.e., with group practices using more expensive inputs, leading to higher costs per case despite these practices being technically more efficient). Other practice characteristics such as participation in disease management programs show the same impact throughout both cost and technical efficiency: participation in disease management programs led to an increase in both, technical and cost efficiency, and may also have had positive effects on the quality of care. Future studies should take quality-related issues into account.

  6. Virtual reality training for improving the skills needed for performing surgery of the ear, nose or throat.

    PubMed

    Piromchai, Patorn; Avery, Alex; Laopaiboon, Malinee; Kennedy, Gregor; O'Leary, Stephen

    2015-09-09

    Virtual reality simulation uses computer-generated imagery to present a simulated training environment for learners. This review seeks to examine whether there is evidence to support the introduction of virtual reality surgical simulation into ear, nose and throat surgical training programmes. 1. To assess whether surgeons undertaking virtual reality simulation-based training achieve surgical ('patient') outcomes that are at least as good as, or better than, those achieved through conventional training methods.2. To assess whether there is evidence from either the operating theatre, or from controlled (simulation centre-based) environments, that virtual reality-based surgical training leads to surgical skills that are comparable to, or better than, those achieved through conventional training. The Cochrane Ear, Nose and Throat Disorders Group (CENTDG) Trials Search Co-ordinator searched the CENTDG Trials Register; Central Register of Controlled Trials (CENTRAL 2015, Issue 6); PubMed; EMBASE; ERIC; CINAHL; Web of Science; ClinicalTrials.gov; ICTRP and additional sources for published and unpublished trials. The date of the search was 27 July 2015. We included all randomised controlled trials and controlled trials comparing virtual reality training and any other method of training in ear, nose or throat surgery. We used the standard methodological procedures expected by The Cochrane Collaboration. We evaluated both technical and non-technical aspects of skill competency. We included nine studies involving 210 participants. Out of these, four studies (involving 61 residents) assessed technical skills in the operating theatre (primary outcomes). Five studies (comprising 149 residents and medical students) assessed technical skills in controlled environments (secondary outcomes). The majority of the trials were at high risk of bias. We assessed the GRADE quality of evidence for most outcomes across studies as 'low'. Operating theatre environment (primary outcomes) In the operating theatre, there were no studies that examined two of three primary outcomes: real world patient outcomes and acquisition of non-technical skills. The third primary outcome (technical skills in the operating theatre) was evaluated in two studies comparing virtual reality endoscopic sinus surgery training with conventional training. In one study, psychomotor skill (which relates to operative technique or the physical co-ordination associated with instrument handling) was assessed on a 10-point scale. A second study evaluated the procedural outcome of time-on-task. The virtual reality group performance was significantly better, with a better psychomotor score (mean difference (MD) 1.66, 95% CI 0.52 to 2.81; 10-point scale) and a shorter time taken to complete the operation (MD -5.50 minutes, 95% CI -9.97 to -1.03). Controlled training environments (secondary outcomes) In a controlled environment five studies evaluated the technical skills of surgical trainees (one study) and medical students (three studies). One study was excluded from the analysis. Surgical trainees: One study (80 participants) evaluated the technical performance of surgical trainees during temporal bone surgery, where the outcome was the quality of the final dissection. There was no difference in the end-product scores between virtual reality and cadaveric temporal bone training. Medical students: Two other studies (40 participants) evaluated technical skills achieved by medical students in the temporal bone laboratory. Learners' knowledge of the flow of the operative procedure (procedural score) was better after virtual reality than conventional training (SMD 1.11, 95% CI 0.44 to 1.79). There was also a significant difference in end-product score between the virtual reality and conventional training groups (SMD 2.60, 95% CI 1.71 to 3.49). One study (17 participants) revealed that medical students acquired anatomical knowledge (on a scale of 0 to 10) better during virtual reality than during conventional training (MD 4.3, 95% CI 2.05 to 6.55). No studies in a controlled training environment assessed non-technical skills. There is limited evidence to support the inclusion of virtual reality surgical simulation into surgical training programmes, on the basis that it can allow trainees to develop technical skills that are at least as good as those achieved through conventional training. Further investigations are required to determine whether virtual reality training is associated with better real world outcomes for patients and the development of non-technical skills. Virtual reality simulation may be considered as an additional learning tool for medical students.

  7. Extraction of respiratory signals from the electrocardiogram and photoplethysmogram: technical and physiological determinants.

    PubMed

    Charlton, Peter H; Bonnici, Timothy; Tarassenko, Lionel; Alastruey, Jordi; Clifton, David A; Beale, Richard; Watkinson, Peter J

    2017-05-01

    Breathing rate (BR) can be estimated by extracting respiratory signals from the electrocardiogram (ECG) or photoplethysmogram (PPG). The extracted respiratory signals may be influenced by several technical and physiological factors. In this study, our aim was to determine how technical and physiological factors influence the quality of respiratory signals. Using a variety of techniques 15 respiratory signals were extracted from the ECG, and 11 from PPG signals collected from 57 healthy subjects. The quality of each respiratory signal was assessed by calculating its correlation with a reference oral-nasal pressure respiratory signal using Pearson's correlation coefficient. Relevant results informing device design and clinical application were obtained. The results informing device design were: (i) seven out of 11 respiratory signals were of higher quality when extracted from finger PPG compared to ear PPG; (ii) laboratory equipment did not provide higher quality of respiratory signals than a clinical monitor; (iii) the ECG provided higher quality respiratory signals than the PPG; (iv) during downsampling of the ECG and PPG significant reductions in quality were first observed at sampling frequencies of  <250 Hz and  <16 Hz respectively. The results informing clinical application were: (i) frequency modulation-based respiratory signals were generally of lower quality in elderly subjects compared to young subjects; (ii) the qualities of 23 out of 26 respiratory signals were reduced at elevated BRs; (iii) there were no differences associated with gender. Recommendations based on the results are provided regarding device designs for BR estimation, and clinical applications. The dataset and code used in this study are publicly available.

  8. COMP report: CPQR technical quality control guidelines for low-dose-rate permanent seed brachytherapy.

    PubMed

    Beaulieu, Luc; Radford, Dee-Ann; Eduardo Villarreal-Barajas, J

    2018-03-14

    The Canadian Organization of Medical Physicists (COMP), in close partnership with the Canadian Partnership for Quality Radiotherapy (CPQR) has developed a series of Technical Quality Control (TQC) guidelines for radiation treatment equipment. These guidelines outline the performance objectives that equipment should meet in order to ensure an acceptable level of radiation treatment quality. The TQC guidelines have been rigorously reviewed and field tested in a variety of Canadian radiation treatment facilities. The development process enables rapid review and update to keep the guidelines current with changes in technology. This article contains detailed performance objectives and safety criteria for low-dose-rate (LDR) permanent seed brachytherapy. © 2018 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

  9. User Satisfaction with Family Planning Services in Government Health Centres in the Congo.

    PubMed

    Ndziessi, Gilbert; Bintsene-Mpika, Gickelle; Bileckot, Richard

    2017-09-01

    Patient satisfaction is considered an indicator of quality of care. This study aimed to assess the degree of clients' satisfaction with family planning (FP) services in government health centers in Congo. A cross-sectional study was conducted. A total of 635 clients nested in 27 health facilities were included in the analysis. Satisfaction was defined as "having a good perception of provider technical skills, being satisfied with the service organization and having a general positive appreciation of FP services. Statistical analyses were performed using SPSS v15. Among 635 clients, 57% perceived lack of technical competence in providers, 88% perceived good organization in FP services and 77% declared having general positive appreciation of FP services. Global level of client satisfaction was 42%. In conclusion client satisfaction with FP service was low and strengthening health workers technical competence is crucial. But, as the quality is multidimensional, other aspects especially significant funding investment and quality-assurance interventions must be taken into account.

  10. Key team physical and technical performance indicators indicative of team quality in the soccer Chinese super league.

    PubMed

    Yang, Gai; Leicht, Anthony S; Lago, Carlos; Gómez, Miguel-Ángel

    2018-01-01

    The aim of this study was to identify the key physical and technical performance variables related to team quality in the Chinese Super League (CSL). Teams' performance variables were collected from 240 matches and analysed via analysis of variance between end-of-season-ranked groups and multinomial logistic regression. Significant physical performance differences between groups were identified for sprinting (top-ranked group vs. upper-middle-ranked group) and total distance covered without possession (upper and upper-middle-ranked groups and lower-ranked group). For technical performance, teams in the top-ranked group exhibited a significantly greater amount of possession in opponent's half, number of entry passes in the final 1/3 of the field and the Penalty Area, and 50-50 challenges than lower-ranked teams. Finally, time of possession increased the probability of a win compared with a draw. The current study identified key performance indicators that differentiated end-season team quality within the CSL.

  11. Digital photo documentation of forensically relevant injuries as part of the clinical first response protocol.

    PubMed

    Verhoff, Marcel A; Kettner, Mattias; Lászik, András; Ramsthaler, Frank

    2012-09-01

    A problem encountered by medical examiners is that they have to assess injuries that have already been medically treated. Thus, they have to base their reports on clinical forensic examinations performed hours or days after an injury was sustained, or even base their assessment solely on information gleaned from medical files. In both scenarios, the forensic examiner has to rely heavily on the first responder's documentation of the original injury pattern. Medical priority will be to immediately treat a patient's injuries, and the first responder may, in addition, initially be unaware of a possibly criminal origin of an injury. As a result, the documentation of injuries is frequently of limited value for forensic purposes. This situation could be improved if photographic records were briefly made of injuries before they were treated. German-language medicolegal, criminal, and photography journals and books were selectively searched with the help of PubMed and other databases. In addition, the authors' experiences in creating and evaluating photographic records for clinical forensic use were assessed. This paper is an aid to creating photographic records of sufficient quality for forensic purposes. The options provided by digital photography in particular make this endeavor feasible even in a clinical setting. In addition, our paper illuminates some technical aspects of creating and archiving photographic records for forensic use, and addresses possible error sources. With the requisite technical background knowledge, injuries can be photographically recorded to forensic standards during patient care.

  12. Veterinary students' usage and perception of video teaching resources.

    PubMed

    Roshier, Amanda L; Foster, Neil; Jones, Michael A

    2011-01-10

    The purpose of our study was to use a student-centred approach to develop an online video learning resource (called 'Moo Tube') at the School of Veterinary Medicine and Science, University of Nottingham, UK and also to provide guidance for other academics in the School wishing to develop a similar resource in the future. A focus group in the format of the nominal group technique was used to garner the opinions of 12 undergraduate students (3 from year-1, 4 from year-2 and 5 from year-3). Students generated lists of items in response to key questions, these responses were thematically analysed to generate key themes which were compared between the different year groups. The number of visits to 'Moo Tube' before and after an objective structured practical examination (OSPE) was also analysed to provide data on video usage. Students highlighted a number of strengths of video resources which can be grouped into four overarching themes: (1) teaching enhancement, (2) accessibility, (3) technical quality and (4) video content. Of these themes, students rated teaching enhancement and accessibility most highly. Video usage was seen to significantly increase (P < 0.05) prior to an examination and significantly decrease (P < 0.05) following the examination. The students had a positive perception of video usage in higher education. Video usage increases prior to practical examinations. Image quality was a greater concern with year-3 students than with either year-1 or 2 students but all groups highlighted the following as important issues: i) good sound quality, ii) accessibility, including location of videos within electronic libraries, and iii) video content. Based on the findings from this study, guidelines are suggested for those developing undergraduate veterinary videos. We believe that many aspects of our list will have resonance in other areas of medicine education and higher education.

  13. Femtopulse laser-based mask repair in the DUV wavelength regime

    NASA Astrophysics Data System (ADS)

    Ghadiali, Firoz; Tolani, Vikram; Nagpal, Rajesh; Robinson, Tod; LeClaire, Jeff; Bozak, Ron; Lee, David A.; White, Roy

    2006-05-01

    Deep ultraviolet (DUV) femtosecond-pulsed laser ablation has numerous highly desirable properties for subtractive photomask defect repair. These qualities include high removal rates, resolution better than the focused spot size, minimized redeposition of the ablated material (rollup and splatter), and a negligible heat affected zone. The optical properties of the photomask result in a broad repair process window because the absorber film (whether Cr or MoSi) and the transmissive substrate allow for a high degree of material removal selectivity. Repair results and process parameters from such a system are examined in light of theoretical considerations. In addition, the practical aspects of the operation of this system in a production mask house environment are reviewed from the standpoint of repair quality, capability, availability, and throughput. Focus is given to the benefit received by the mask shop, and to the technical performance of the system.

  14. COMMUNITY MULTISCALE AIR QUALITY MODELING SYSTEM (ONE ATMOSPHERE)

    EPA Science Inventory

    This task supports ORD's strategy by providing responsive technical support of EPA's mission and provides credible state of the art air quality models and guidance. This research effort is to develop and improve the Community Multiscale Air Quality (CMAQ) modeling system, a mu...

  15. Improving and monitoring air quality.

    PubMed

    DuPont, André

    2018-05-01

    Since the authorization of the Clean Air Act Amendments of 1990, the air quality in the USA has significantly improved because of strong public support. The lessons learned over the last 25 years are being shared with the policy analysts, technical professionals, and scientist who endeavor to improve air quality in their communities. This paper will review how the USA has achieved the "high" standard of air quality that was envisioned in the early 1990s. This document will describe SO 2 gas emission reduction technology and highlight operation of emission monitoring technology. This paper describes the basic process operation of an air pollution control scrubber. A technical review of measures required to operate and maintain a large-scale pollution control system will be described. Also, the author explains how quality assurance procedures in performance of continuous emission monitoring plays a significant role in reducing air pollution.

  16. Changes in hemp secondary fiber production related to technical fiber variability revealed by light microscopy and attenuated total reflectance Fourier transform infrared spectroscopy

    PubMed Central

    Fernandez-Tendero, Eva; Day, Arnaud; Legros, Sandrine; Habrant, Anouck; Hawkins, Simon

    2017-01-01

    Interest in hemp (Cannabis sativa L.) is increasing due to the development of a new range of industrial applications based on bast fibers. However the variability of bast fiber yield and quality represents an important barrier to further exploitation. Primary and secondary fiber content was examined in two commercial hemp varieties (Fedora 17, Santhica 27) grown under contrasted sowing density and irrigation conditions. Both growing conditions and hemp varieties impact stem tissue architecture with a large effect on the proportion of secondary fibers but not primary fibers. Attenuated total reflectance infrared spectroscopy allowed the discrimination of manually-isolated native primary fibers and secondary fibers but did not reveal any clustering according to growing conditions and variety. Infrared data were confirmed by wet chemistry analyses that revealed slight but significant differences between primary and secondary fiber cell wall composition. Infrared spectroscopy of technical fibers obtained after mechanical defibering revealed differences with native primary, but not secondary fibers and also discriminated samples obtained from plants grown under different conditions. Altogether the results suggested that the observed variability of hemp technical fibers could be partially explained by i) differences in secondary fiber production and ii) differential behavior during mechanical defibering resulting in unequal separation of primary and secondary fibers. PMID:28640922

  17. Changes in hemp secondary fiber production related to technical fiber variability revealed by light microscopy and attenuated total reflectance Fourier transform infrared spectroscopy.

    PubMed

    Fernandez-Tendero, Eva; Day, Arnaud; Legros, Sandrine; Habrant, Anouck; Hawkins, Simon; Chabbert, Brigitte

    2017-01-01

    Interest in hemp (Cannabis sativa L.) is increasing due to the development of a new range of industrial applications based on bast fibers. However the variability of bast fiber yield and quality represents an important barrier to further exploitation. Primary and secondary fiber content was examined in two commercial hemp varieties (Fedora 17, Santhica 27) grown under contrasted sowing density and irrigation conditions. Both growing conditions and hemp varieties impact stem tissue architecture with a large effect on the proportion of secondary fibers but not primary fibers. Attenuated total reflectance infrared spectroscopy allowed the discrimination of manually-isolated native primary fibers and secondary fibers but did not reveal any clustering according to growing conditions and variety. Infrared data were confirmed by wet chemistry analyses that revealed slight but significant differences between primary and secondary fiber cell wall composition. Infrared spectroscopy of technical fibers obtained after mechanical defibering revealed differences with native primary, but not secondary fibers and also discriminated samples obtained from plants grown under different conditions. Altogether the results suggested that the observed variability of hemp technical fibers could be partially explained by i) differences in secondary fiber production and ii) differential behavior during mechanical defibering resulting in unequal separation of primary and secondary fibers.

  18. Technical efficiency of selected hospitals in Eastern Ethiopia.

    PubMed

    Ali, Murad; Debela, Megersa; Bamud, Tewfik

    2017-12-01

    This study examines the relative technical efficiency of 12 hospitals in Eastern Ethiopia. Using six-year-round panel data for the period between 2007/08 and 2012/13, this study examines the technical efficiency, total factor productivity, and determinants of the technical inefficiency of hospitals. Data envelopment analysis (DEA) and DEA- based Malmquist productivity index used to estimate relative technical efficiency, scale efficiency, and total factor productivity index of hospitals. Tobit model used to examine the determinants of the technical inefficiency of hospitals. The DEA Variable Returns to Scale (VRS) estimate indicated that 6 (50%), 5 (42%), 3 (25%), 3 (25%), 4 (33%), and 3 (25%) of the hospitals were technically inefficient while 9 (75%), 9 (75%), 7 (58%), 7 (58%), 7 (58%) and 8 (67%) of hospitals were scale inefficient between 2007/08 and 2012/13, respectively. On average, Malmquist Total Factor Productivity (MTFP) of the hospitals decreased by 3.6% over the panel period. The Tobit model shows that teaching hospital is less efficiency than other hospitals. The Tobit regression model further shows that medical doctor to total staff ratio, the proportion of outpatient visit to inpatient days, and the proportion of inpatients treated per medical doctor were negatively related with technical inefficiency of hospitals. Hence, policy interventions that help utilize excess capacity of hospitals, increase doctor to other staff ratio, and standardize number of inpatients treated per doctor would contribute to the improvement of the technical efficiency of hospitals.

  19. 78 FR 40966 - Approval and Promulgation of Air Quality Implementation Plans; New Mexico; Interstate Transport...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-09

    ...'s technical analysis addressing the requirements of CAA section 110(a)(2)(D)(i) for the 2006 PM 2.5 NAAQS, with EPA's additional analysis and technical information, we approve the portion of the June 12...

  20. 76 FR 6376 - Approval of Air Quality Implementation Plans; Indiana and Ohio; Disapproval of Interstate...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-04

    ... impact. EPA stated that the State's conclusion should be supported by an adequate technical analysis. EPA... technical analysis, no such analysis was provided by IDEM justifying that these measures are sufficient to... a State's [[Page 6379

  1. Standards for Cell Line Authentication and Beyond

    PubMed Central

    Cole, Kenneth D.; Plant, Anne L.

    2016-01-01

    Different genomic technologies have been applied to cell line authentication, but only one method (short tandem repeat [STR] profiling) has been the subject of a comprehensive and definitive standard (ASN-0002). Here we discuss the power of this document and why standards such as this are so critical for establishing the consensus technical criteria and practices that can enable progress in the fields of research that use cell lines. We also examine other methods that could be used for authentication and discuss how a combination of methods could be used in a holistic fashion to assess various critical aspects of the quality of cell lines. PMID:27300367

  2. Research on reform plan of civil engineering adult education graduation design

    NASA Astrophysics Data System (ADS)

    Su, Zhibin; Sun, Shengnan; Cui, Shicai

    2017-12-01

    As for civil engineering adult education graduation design, reform program is put forward combined with our school. The main points of reform include the following aspects. New pattern of graduation design which is consisted of basic training of engineering design, technical application and engineering innovation training is formed. Integration model of graduation design and employment is carried out. Multiple professional guidance graduation design pattern is put forward. Subject of graduation design is chosen based on the school actual circumstance. A “three stage” quality monitoring system is established. Performance evaluation pattern that concludes two oral examinations of the dissertation is strictly carried out.

  3. Technical considerations in the evaluation of pediatric motor scales.

    PubMed

    Berk, R A; DeGangi, G A

    1979-04-01

    Guidelines are suggested for evaluating the validity and reliability of fine and gross motor scales. In the process of examining three types of validity (domain, construct, discriminant) and two types of reliability (interobserver, decision-making), it was found that there were marked deficiencies in most of the instruments currently available, particularly in the areas of discriminant validity and decision-making reliability. Each psychometric property of the scales was addressed from both scale-developer and user perspectives. An evaluative checklist is generated to assist occupational therapists who need to decide on the quality and appropriateness of a motor behavior scale for specific decision applications.

  4. A procedural skills OSCE: assessing technical and non-technical skills of internal medicine residents.

    PubMed

    Pugh, Debra; Hamstra, Stanley J; Wood, Timothy J; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

    2015-03-01

    Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal medicine (IM) residents to assess their technical and non-technical skills when performing procedures. Thirty-five first to third-year IM residents participated in a 5-station PS-OSCE, which combined partial task models, standardized patients, and allied health professionals. Formal blueprinting was performed and content experts were used to develop the cases and rating instruments. Examiners underwent a frame-of-reference training session to prepare them for their rater role. Scores were compared by levels of training, experience, and to evaluation data from a non-procedural OSCE (IM-OSCE). Reliability was calculated using Generalizability analyses. Reliabilities for the technical and non-technical scores were 0.68 and 0.76, respectively. Third-year residents scored significantly higher than first-year residents on the technical (73.5 vs. 62.2%) and non-technical (83.2 vs. 75.1%) components of the PS-OSCE (p < 0.05). Residents who had performed the procedures more frequently scored higher on three of the five stations (p < 0.05). There was a moderate disattenuated correlation (r = 0.77) between the IM-OSCE and the technical component of the PS-OSCE scores. The PS-OSCE is a feasible method for assessing multiple competencies related to performing procedures and this study provides validity evidence to support its use as an in-training examination.

  5. Exploring the Benefits of Teacher-Modeling Strategies Integrated into Career and Technical Education

    ERIC Educational Resources Information Center

    Cathers, Thomas J., Sr.

    2013-01-01

    This case study examined how career and technical education classes function using multiple instructional modeling strategies integrated into vocational and technical training environments. Seven New Jersey public school technical teachers received an introductory overview of the investigation and participated by responding to 10 open-end…

  6. Challenges and Opportunities: Two Weeks of Teaching Technical Communication at Suzhou University, China.

    ERIC Educational Resources Information Center

    Ding, Daniel; Jablonski, John

    2001-01-01

    Relates the authors' experience teaching technical writing for two weeks at Suzhou University in China. Discusses activities; examines four technical writing textbooks purchased there; and offers suggestions about how technical communication might be established as a separate academic discipline in Chinese universities. Discusses technical…

  7. US Accreditation in Mexico: Quality in Higher Education as Symbol, Performance and Translation

    ERIC Educational Resources Information Center

    Blanco-Ramirez, Gerardo

    2015-01-01

    Quality practices in higher education involve more than mere compliance with standards and technical mandates; given the complexity of the decisions involved in quality in higher education, this concept, quality, can be analyzed as symbol and performance. This paper utilizes translation as heuristic to analyze the implementation of US…

  8. Healthcare service quality perception in Japan.

    PubMed

    Eleuch, Amira ep Koubaa

    2011-01-01

    This study aims to assess Japanese patients' healthcare service quality perceptions and to shed light on the most meaningful service features. It follows-up a study published in IJHCQA Vol. 21 No. 7. Through a non-linear approach, the study relied on the scatter model to detect healthcare service features' importance in forming overall quality judgment. Japanese patients perceive healthcare services through a linear compensatory process. Features related to technical quality and staff behavior compensate for each other to decide service quality. A limitation of the study is the limited sample size. Non-linear approaches could help researchers to better understand patients' healthcare service quality perceptions. The study highlights a need to adopt an evolution that enhances technical quality and medical practices in Japanese healthcare settings. The study relies on a non-linear approach to assess patient overall quality perceptions in order to enrich knowledge. Furthermore, the research is conducted in Japan where healthcare marketing studies are scarce owing to cultural and language barriers. Japanese culture and healthcare system characteristics are used to explain and interpret the results.

  9. The Development of Technical and Vocational Education in Malaysia--A Case Study in Quality Improvement. Case Studies on Technical and Vocational Education in Asia and the Pacific.

    ERIC Educational Resources Information Center

    Hee, Tieng Fok

    The economic profile of Malaysia has changed from an economy mainly based on agriculture and the production of tin ore to a more balanced economy with continuing growth in the manufacturing and industrial sectors. Educational programs need to be upgraded and improved, particularly the direction and development of technical and vocational education…

  10. The Development of Technical and Vocational Education in India--A Case Study in Quality Improvement. Case Studies on Technical and Vocational Education in Asia and the Pacific.

    ERIC Educational Resources Information Center

    Mishra, Arun K.

    Education has a place of high priority on India's development agenda. The technical/vocational education (TVE) system is multisectoral with each ministry responsible for labor force development in that sector. The TVE programs in the formal education system are either state delivered or financed. The higher secondary vocational education program…

  11. The Development of Technical and Vocational Education in Indonesia--A Case Study in Quality Improvement. Case Studies on Technical and Vocational Education in Asia and the Pacific.

    ERIC Educational Resources Information Center

    Bakri, Mohamad

    After its independence in 1969, Indonesia studied and analyzed its previous colonial system of technical and vocational education (TVE) and took steps to overcome the shortcomings. TVE was required to provide expansion of work opportunities and industrial development to promote national development. Until 1989, attention was given to further…

  12. Technical aspects of cardiac PET/MRI.

    PubMed

    Masuda, Atsuro; Nemoto, Ayaka; Takeishi, Yasuchika

    2018-06-01

    PET/MRI is a novel modality that enables to combine PET and MR images, and has significant potential to evaluate various cardiac diseases through the combination of PET molecular imaging and MRI functional imaging. Precise management of technical issues, however, is necessary for cardiac PET/MRI. This article describes several technical points, including patient preparation, MR attenuation correction, parallel acquisition of PET with MRI, clinical aspects, and image quality control.

  13. Technical Aspects of Endobronchial Ultrasound-Guided Transbronchial Needle Aspiration: CHEST Guideline and Expert Panel Report.

    PubMed

    Wahidi, Momen M; Herth, Felix; Yasufuku, Kazuhiro; Shepherd, Ray Wesley; Yarmus, Lonny; Chawla, Mohit; Lamb, Carla; Casey, Kenneth R; Patel, Sheena; Silvestri, Gerard A; Feller-Kopman, David J

    2016-03-01

    Endobronchial ultrasound (EBUS) was introduced in the last decade, enabling real-time guidance of transbronchial needle aspiration (TBNA) of mediastinal and hilar structures and parabronchial lung masses. The many publications produced about EBUS-TBNA have led to a better understanding of the performance characteristics of this procedure. The goal of this document was to examine the current literature on the technical aspects of EBUS-TBNA as they relate to patient, technology, and proceduralist factors to provide evidence-based and expert guidance to clinicians. Rigorous methodology has been applied to provide a trustworthy evidence-based guideline and expert panel report. A group of approved panelists developed key clinical questions by using the PICO (population, intervention, comparator, and outcome) format that addressed specific topics on the technical aspects of EBUS-TBNA. MEDLINE (via PubMed) and the Cochrane Library were systematically searched for relevant literature, which was supplemented by manual searches. References were screened for inclusion, and well-recognized document evaluation tools were used to assess the quality of included studies, to extract meaningful data, and to grade the level of evidence to support each recommendation or suggestion. Our systematic review and critical analysis of the literature on 15 PICO questions related to the technical aspects of EBUS-TBNA resulted in 12 statements: 7 evidence-based graded recommendations and 5 ungraded consensus-based statements. Three questions did not have sufficient evidence to generate a statement. Evidence on the technical aspects of EBUS-TBNA varies in strength but is satisfactory in certain areas to guide clinicians on the best conditions to perform EBUS-guided tissue sampling. Additional research is needed to enhance our knowledge regarding the optimal performance of this effective procedure. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

  14. Study on the removal efficiency of UF membranes using bacteriophages in bench-scale and semi-technical scale.

    PubMed

    Kreissel, K; Bösl, M; Lipp, P; Franzreb, M; Hambsch, B

    2012-01-01

    To determine the removal efficiency of ultrafiltration (UF) membranes for nano-particles in the size range of viruses the state of the art uses challenge tests with virus-spiked water. This work focuses on bench-scale and semi-technical scale experiments. Different experimental parameters influencing the removal efficiency of the tested UF membrane modules were analyzed and evaluated for bench- and semi-technical scale experiments. Organic matter in the water matrix highly influenced the removal of the tested bacteriophages MS2 and phiX174. Less membrane fouling (low ΔTMP) led to a reduced phage reduction. Increased flux positively affected phage removal in natural waters. The tested bacteriophages MS2 and phiX174 revealed different removal properties. MS2, which is widely used as a model organism to determine virus removal efficiencies of membranes, mostly showed a better removal than phiX174 for the natural water qualities tested. It seems that MS2 is possibly a less conservative surrogate for human enteric virus removal than phiX174. In bench-scale experiments log removal values (LRV) for MS2 of 2.5-6.0 and of 2.5-4.5 for phiX174 were obtained for the examined range of parameters. Phage removal obtained with differently fabricated semi-technical modules was quite variable for comparable parameter settings, indicating that module fabrication can lead to differing results. Potting temperature and module size were identified as influencing factors. In conclusion, careful attention has to be paid to the choice of experimental settings and module potting when using bench-scale or semi-technical scale experiments for UF membrane challenge tests.

  15. Impact of Nuclear Laboratory Personnel Credentials & Continuing Education on Nuclear Cardiology Laboratory Quality Operations.

    PubMed

    Malhotra, Saurabh; Sobieraj, Diana M; Mann, April; Parker, Matthew W

    2017-12-22

    Background/Objectives: The specific credentials and continuing education (CME/CE) of nuclear cardiology laboratory medical and technical staff are important factors in the delivery of quality imaging services that have not been systematically evaluated. Methods: Nuclear cardiology accreditation application data from the Intersocietal Accreditation Commission (IAC) was used to characterize facilities performing myocardial perfusion imaging by setting, size, previous accreditation and credentials of the medical and technical staff. Credentials and CME/CE were compared against initial accreditation decisions (grant or delay) using multivariable logistic regression. Results: Complete data were available for 1913 nuclear cardiology laboratories from 2011-2014. Laboratories with initial positive accreditation decisions had a greater prevalence of Certification Board in Nuclear Cardiology (CBNC) certified medical directors and specialty credentialed technical directors. Certification and credentials of the medical and technical directors, respectively, staff CME/CE compliance, and assistance of a consultant with the application were positively associated with accreditation decisions. Conclusion: Nuclear cardiology laboratories directed by CBNC-certified physicians and NCT- or PET-credentialed technologists were less likely to receive delay decisions for MPI. CME/CE compliance of both the medical and technical directors was associated with accreditation decision. Medical and technical directors' years of experience were not associated with accreditation decision. Copyright © 2017 by the Society of Nuclear Medicine and Molecular Imaging, Inc.

  16. Process Evaluation of a Quality Improvement Project to Decrease Hospital Readmissions From Skilled Nursing Facilities.

    PubMed

    Meehan, Thomas P; Qazi, Daniel J; Van Hoof, Thomas J; Ho, Shih-Yieh; Eckenrode, Sheila; Spenard, Ann; Pandolfi, Michelle; Johnson, Florence; Quetti, Deborah

    2015-08-01

    To describe and evaluate the impact of quality improvement (QI) support provided to skilled nursing facilities (SNFs) by a Quality Improvement Organization (QIO). Retrospective, mixed-method, process evaluation of a QI project intended to decrease preventable hospital readmissions from SNFs. Five SNFs in Connecticut. SNF Administrators, Directors of Nursing, Assistant Directors of Nursing, Admissions Coordinators, Registered Nurses, Certified Nursing Assistants, Receptionists, QIO Quality Improvement Consultant. QIO staff provided training and technical assistance to SNF administrative and clinical staff to establish or enhance QI infrastructure and implement an established set of QI tools [Interventions to Reduce Acute Care Transfers (INTERACT) tools]. Baseline SNF demographic, staffing, and hospital readmission data; baseline and follow-up SNF QI structure (QI Committee), processes (general and use of INTERACT tools), and outcome (30-day all-cause hospital readmission rates); details of QIO-provided training and technical assistance; QIO-perceived barriers to quality improvement; SNF leadership-perceived barriers, accomplishments, and suggestions for improvement of QIO support. Success occurred in establishing QI Committees and targeting preventable hospital readmissions, as well as implementing INTERACT tools in all SNFs; however, hospital readmission rates decreased in only 2 facilities. QIO staff and SNF leaders noted the ongoing challenge of engaging already busy SNF staff and leadership in QI activities. SNF leaders reported that they appreciated the training and technical assistance that their institutions received, although most noted that additional support was needed to bring about improvement in readmission rates. This process evaluation documented mixed clinical results but successfully identified opportunities to improve recruitment of and provision of technical support to participating SNFs. Recommendations are offered for others who wish to conduct similar projects. Copyright © 2015 AMDA – The Society for Post-Acute and Long-Term Care Medicine. All rights reserved.

  17. Quality and learning aspects of the first 9000 spirometries of the LifeGene study.

    PubMed

    Qvarfordt, Mikaela; Anderson, Martin; Svartengren, Magnus

    2018-02-19

    Spirometry requires the patient to cooperate and do the manoeuvre 'right' for reliable results. Algorithms to assess test quality as well as educational recommendations for personnel are defined in guidelines. We compared the quality of forced spirometry tests performed by spirometry technicians with little or no previous experience of spirometry using spirometry systems with different modes of feedback. In both cases, the spirometry technician received general feedback on the screen based on ATS/ERS guidelines, such as 'exhale faster' and 'exhale longer'. The major difference was whether quality grading system of the complete session was available simultaneously on screen, or in the printed report afterwards. Two parts of the same population-based study (LifeGene), the pilot (LG1) and the first part (LG2) of the subsequent study, were compared retrospectively. In LG1 (on-screen grading) approved examination quality was achieved for 88% of the 10 first subjects for each spirometry technician compared to 70% in LG2 (printed grading afterwards). The corresponding values after 40 subjects was 94 % in LG1, compared to 73% in LG2, and after the first ten subjects there was no apparent quality improvement in either LG1 or LG2. The quality for LG1 is among the highest reported in the literature even though the spirometry technician were relatively inexperienced. We conclude that on-screen grading in addition to general technical quality feedback is powerful in enhancing the spirometry test session quality.

  18. Nuclear Technology Series. Course 31: Quality-Assurance Practices.

    ERIC Educational Resources Information Center

    Center for Occupational Research and Development, Inc., Waco, TX.

    This technical specialty course is one of thirty-five courses designed for use by two-year postsecondary institutions in five nuclear technician curriculum areas: (1) radiation protection technician, (2) nuclear instrumentation and control technician, (3) nuclear materials processing technician, (4) nuclear quality-assurance/quality-control…

  19. Development of techniques and data for evaluating ride quality. Volume 2 : ride-quality research

    DOT National Transportation Integrated Search

    1978-03-01

    Ride-quality models for city buses and intercity trains are presented : and discussed in terms of their ability to predict passenger : comfort and ride acceptability. : This, the second of three volumes, contains a technical discussion, : of the ride...

  20. Developing Water Quality Critera for Suspended and Bedded Sediments-Illustrative Example Application.

    EPA Science Inventory

    The U. S. EPA's Framework for Developing Suspended and Bedded Sediments (SABS) Water Quality Criteria (SABS Framework) provides a consistent process, technical methods, and supporting materials to enable resource managers to develop ambient water quality criteria for one of the m...

  1. Is Beauty in the Eyes of the Beholder? Aesthetic Quality versus Technical Skill in Movement Evaluation of Tai Chi.

    PubMed

    Zamparo, Paola; Zorzi, Elena; Marcantoni, Sara; Cesari, Paola

    2015-01-01

    The aim of this study was to compare experts to naïve practitioners in rating the beauty and the technical quality of a Tai Chi sequence observed in video-clips (of high and middle level performances). Our hypothesis are: i) movement evaluation will correlate with the level of skill expressed in the kinematics of the observed action but ii) only experts will be able to unravel the technical component from the aesthetic component of the observed action. The judgments delivered indicate that both expert and non-expert observers are able to discern a good from a mediocre performance; however, as expected, only experts discriminate the technical from the aesthetic component of the action evaluated and do this independently of the level of skill shown by the model (high or middle level performances). Furthermore, the judgments delivered were strongly related to the kinematic variables measured in the observed model, indicating that observers rely on specific movement kinematics (e.g. movement amplitude, jerk and duration) for action evaluation. These results provide evidence of the complementary functional role of visual and motor action representation in movement evaluation and underline the role of expertise in judging the aesthetic quality of movements.

  2. Is Beauty in the Eyes of the Beholder? Aesthetic Quality versus Technical Skill in Movement Evaluation of Tai Chi

    PubMed Central

    2015-01-01

    The aim of this study was to compare experts to naïve practitioners in rating the beauty and the technical quality of a Tai Chi sequence observed in video-clips (of high and middle level performances). Our hypothesis are: i) movement evaluation will correlate with the level of skill expressed in the kinematics of the observed action but ii) only experts will be able to unravel the technical component from the aesthetic component of the observed action. The judgments delivered indicate that both expert and non-expert observers are able to discern a good from a mediocre performance; however, as expected, only experts discriminate the technical from the aesthetic component of the action evaluated and do this independently of the level of skill shown by the model (high or middle level performances). Furthermore, the judgments delivered were strongly related to the kinematic variables measured in the observed model, indicating that observers rely on specific movement kinematics (e.g. movement amplitude, jerk and duration) for action evaluation. These results provide evidence of the complementary functional role of visual and motor action representation in movement evaluation and underline the role of expertise in judging the aesthetic quality of movements. PMID:26047473

  3. 32 CFR 651.45 - Steps in preparing and processing an EIS.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... technical analyses are balanced with environmental analysis, the agency preferred alternative will not...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Impact Statement § 651.45... alternatives based on relevant factors including environmental, economic, and technical considerations and...

  4. The Technical Communicator and ISO 9000.

    ERIC Educational Resources Information Center

    Weiss, Edmond H.

    1993-01-01

    Describes the complexities of ISO 9000, a set of generic quality standards to which any commercial firm wishing to do business with a member firm of the European Economic Community will have to comply. Describes opportunities for professional technical communicators in providing the required product documentation. (SR)

  5. 7 CFR 652.6 - Department delivery of technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 6 2011-01-01 2011-01-01 false Department delivery of technical services. 652.6 Section 652.6 Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES... USDA Federal assistance rules and requirements for competency, quality, and selection, as appropriate...

  6. [Chinese medicine industry 4.0:advancing digital pharmaceutical manufacture toward intelligent pharmaceutical manufacture].

    PubMed

    Cheng, Yi-Yu; Qu, Hai-Bin; Zhang, Bo-Li

    2016-01-01

    A perspective analysis on the technological innovation in pharmaceutical engineering of Chinese medicine unveils a vision on "Future Factory" of Chinese medicine industry in mind. The strategy as well as the technical roadmap of "Chinese medicine industry 4.0" is proposed, with the projection of related core technology system. It is clarified that the technical development path of Chinese medicine industry from digital manufacture to intelligent manufacture. On the basis of precisely defining technical terms such as process control, on-line detection and process quality monitoring for Chinese medicine manufacture, the technical concepts and characteristics of intelligent pharmaceutical manufacture as well as digital pharmaceutical manufacture are elaborated. Promoting wide applications of digital manufacturing technology of Chinese medicine is strongly recommended. Through completely informationized manufacturing processes and multi-discipline cluster innovation, intelligent manufacturing technology of Chinese medicine should be developed, which would provide a new driving force for Chinese medicine industry in technology upgrade, product quality enhancement and efficiency improvement. Copyright© by the Chinese Pharmaceutical Association.

  7. Technical support for Life Sciences communities on a production grid infrastructure.

    PubMed

    Michel, Franck; Montagnat, Johan; Glatard, Tristan

    2012-01-01

    Production operation of large distributed computing infrastructures (DCI) still requires a lot of human intervention to reach acceptable quality of service. This may be achievable for scientific communities with solid IT support, but it remains a show-stopper for others. Some application execution environments are used to hide runtime technical issues from end users. But they mostly aim at fault-tolerance rather than incident resolution, and their operation still requires substantial manpower. A longer-term support activity is thus needed to ensure sustained quality of service for Virtual Organisations (VO). This paper describes how the biomed VO has addressed this challenge by setting up a technical support team. Its organisation, tooling, daily tasks, and procedures are described. Results are shown in terms of resource usage by end users, amount of reported incidents, and developed software tools. Based on our experience, we suggest ways to measure the impact of the technical support, perspectives to decrease its human cost and make it more community-specific.

  8. Underground Test Area Activity Preemptive Review Guidance Nevada National Security Site, Nevada, Revision 0

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Farnham, Irene; Rehfeldt, Kenneth

    Preemptive reviews (PERs) of Underground Test Area (UGTA) Activity corrective action unit (CAU) studies are an important and long-maintained quality improvement process. The CAU-specific PER committees provide internal technical review of ongoing work throughout the CAU lifecycle. The reviews, identified in the UGTA Quality Assurance Plan (QAP) (Sections 1.3.5.1 and 3.2), assure work is comprehensive, accurate, in keeping with the state of the art, and consistent with CAU goals. PER committees review various products, including data, documents, software/codes, analyses, and models. PER committees may also review technical briefings including Federal Facility Agreement and Consent Order (FFACO)-required presentations to the Nevadamore » Division of Environmental Protection (NDEP) and presentations supporting key technical decisions (e.g., investigation plans and approaches). PER committees provide technical recommendations to support regulatory decisions that are the responsibility of the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO) and NDEP.« less

  9. Equity Issues in Public Examinations in Developing Countries. World Bank Technical Paper Number 272. Asia Technical Series.

    ERIC Educational Resources Information Center

    Greaney, Vincent; Kellaghan, Thomas

    Public examinations in developing countries play a critical role in the selection of students for participation in the educational system. The examinations tend to be highly academic, bearing little reference to the everyday lives of students, limited to paper-and-pencil tests, and geared toward discriminating among high achieving students.…

  10. Technical aspects of CT imaging of the spine.

    PubMed

    Tins, Bernhard

    2010-11-01

    This review article discusses technical aspects of computed tomography (CT) imaging of the spine. Patient positioning, and its influence on image quality and movement artefact, is discussed. Particular emphasis is placed on the choice of scan parameters and their relation to image quality and radiation burden to the patient. Strategies to reduce radiation burden and artefact from metal implants are outlined. Data acquisition, processing, image display and steps to reduce artefact are reviewed. CT imaging of the spine is put into context with other imaging modalities for specific clinical indications or problems. This review aims to review underlying principles for image acquisition and to provide a rough guide for clinical problems without being prescriptive. Individual practice will always vary and reflect differences in local experience, technical provisions and clinical requirements.

  11. Honeywell Technical Order Transfer Tests.

    DTIC Science & Technology

    1987-06-12

    of simple corrections, a reasonable reproduction of the original could be generated. The quality was not good enough for a production environment. Lack of automated quality control (AQC) tools could account for the errors.

  12. Technical Solutions to Common Indoor Air Quality Issues in Schools

    EPA Pesticide Factsheets

    Indoor Air Quality (IAQ) Design Tools for Schools provides voluntary guidance for school personnel, architects, engineers, builders and contractors, parents, and the community on key school construction and renovation issues.

  13. [Low-field magnetic resonance imaging for rheumatoid arthritis].

    PubMed

    Ostendorf, B; Edelmann, E; Kellner, H; Scherer, A

    2010-02-01

    Magnetic resonance imaging (MRI) as a cross-sectional imaging procedure allows a three-dimensional representation of musculature, ligaments, tendons, capsules, synovial membranes, bones and cartilage with high resolution quality. An activity assessment is further possible by application of a contrast medium (gadolinium-DTPA) to differentiate between active and chronic inflammatory processes. Evidence of a bone marrow edema detected by MRI in patients with rheumatoid arthritis (RA) can be interpreted as a prognostic and predictive factor for the development of bone erosions. On the basis of these advantages MRI is being employed more and more in the early diagnosis of inflammatory joint diseases. Semi-quantitative scores for analysis and grading of findings have already been developed and are in clinical use. Because MRI technical performances are invariably reproducible they can be practically retrieved in the course of examination which is particularly relevant in rheumatology. Therapy response or progression can thus be adequately displayed. Open, dedicated low-field MRI with a low signal strength of 0.2 Tesla (T) has been known since the 90s and now represents new MRI examination options in rheumatology. Smaller devices with lower acquisition and maintenance expenses as well as considerably more convenience due to the device itself result in a higher subjective acceptability by the patients as well as objectively more data records of low-field MRI scans of RA, which underline the significance of this new technical method. The German Society for Rheumatology (DGRh), represented by the Committee for "Diagnostic Imaging", meets this development with the release of recommendations and standards for the procedures of low-field MRI and their scoring and summarizes the most important technical data and information on clinical indications.

  14. Quality Assurance Project Plan - Modeling the Impact of Hydraulic Fracturing on Water Resources Based on Water Acquisition Scenarios

    EPA Pesticide Factsheets

    This planning document describes the quality assurance/quality control activities and technical requirements that will be used during the research study. The goal of this project is to evaluate the potential impacts of large volume water withdrawals.

  15. 78 FR 33266 - Review of New Sources and Modifications in Indian Country

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-04

    ... burdensome implementation without detriment to air quality in Indian country. Lastly, we are reconsidering... INFORMATION CONTACT: For technical information, contact Greg Nizich, Air Quality Policy Division, Office of Air Quality Planning and Standards (C504-03), Environmental Protection Agency, Research Triangle Park...

  16. TECHNICAL INFORMATION POLICY AND GUIDE OF THE OFFICE OF RESEARCH AND DEVELOPMENT

    EPA Science Inventory

    One of the primary missions of the Office of Research and Development (ORD) is to generate technical information that is key to the protection of environmental quality. This information also influences national environmental policy. In this context, the way in which information i...

  17. 14 CFR 414.19 - Technical criteria for reviewing a safety approval application.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ...-developed criteria must define— (i) Design and minimum performance; (ii) Quality assurance system... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Technical criteria for reviewing a safety... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING SAFETY APPROVALS Safety Approval Review and...

  18. Modernizing Career and Technical Education Programs

    ERIC Educational Resources Information Center

    Drage, Karen

    2009-01-01

    High-quality career and technical education (CTE) programs can launch America's future competitiveness through increased student engagement, the innovative integration of traditional academic courses, and by meeting the needs of both employers and the economy as a whole. American students failing to keep pace with their international counterparts…

  19. NDA Batch 2002-13

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hollister, R

    QC sample results (daily background check drum and 100-gram SGS check drum) were within acceptance criteria established by WIPP's Quality Assurance Objectives for TRU Waste Characterization. Replicate runs were performed on drum LL85501243TRU. Replicate measurement results are identical at the 95% confidence level as established by WIPP criteria. HWM NCAR No. 02-1000168 issued on 17-Oct-2002 regarding a partially dislodged Cd sheet filter on the HPGe coaxial detector. This physical geometry occurred on 01-Oct-2002 and was not corrected until 10-Oct-2002, during which period is inclusive of the present batch run of drums. Per discussions among the Independent Technical Reviewer, Expert Reviewermore » and the Technical QA Supervisor, as well as in consultation with John Fleissner, Technical Point of Contact from Canberra, the analytical results are technically reliable. All QC standard runs during this period were in control. Data packet for SGS Batch 2002-13 generated using passive gamma-ray spectroscopy with the Pu Facility SGS unit is technically reasonable. All QC samples are in compliance with establiShed control limits. The batch data packet has been reviewed for correctness, completeness, consistency and compliance with WIPP's Quality Assurance Objectives and determined to be acceptable.« less

  20. A novel approach to assessing technical competence of colorectal surgery residents: the development and evaluation of the Colorectal Objective Structured Assessment of Technical Skill (COSATS).

    PubMed

    de Montbrun, Sandra L; Roberts, Patricia L; Lowry, Ann C; Ault, Glenn T; Burnstein, Marcus J; Cataldo, Peter A; Dozois, Eric J; Dunn, Gary D; Fleshman, James; Isenberg, Gerald A; Mahmoud, Najjia N; Reznick, Richard K; Satterthwaite, Lisa; Schoetz, David; Trudel, Judith L; Weiss, Eric G; Wexner, Steven D; MacRae, Helen

    2013-12-01

    To develop and evaluate an objective method of technical skills assessment for graduating subspecialists in colorectal (CR) surgery-the Colorectal Objective Structured Assessment of Technical Skill (COSATS). It may be reasonable for the public to assume that surgeons certified as competent have had their technical skills assessed. However, technical skill, despite being the hallmark of a surgeon, is not directly assessed at the time of certification by surgical boards. A procedure-based, multistation technical skills examination was developed to reflect a sample of the range of skills necessary for CR surgical practice. These consisted of bench, virtual reality, and cadaveric models. Reliability and construct validity were evaluated by comparing 10 graduating CR residents with 10 graduating general surgery (GS) residents from across North America. Expert CR surgeons, blinded to level of training, evaluated performance using a task-specific checklist and a global rating scale. The mean global rating score was used as the overall examination score and a passing score was set at "borderline competent for CR practice." The global rating scale demonstrated acceptable interstation reliability (0.69) for a homogeneous group of examinees. Both the overall checklist and global rating scores effectively discriminated between CR and GS residents (P < 0.01), with 27% of the variance attributed to level of training. Nine CR residents but only 3 GS residents were deemed competent. The Colorectal Objective Structured Assessment of Technical Skill effectively discriminated between CR and GS residents. With further validation, the Colorectal Objective Structured Assessment of Technical Skill could be incorporated into the colorectal board examination where it would be the first attempt of a surgical specialty to formally assess technical skill at the time of certification.

  1. Development and Testing of a Nuclear Quality Assurance/Quality Control Technician Curriculum. Final Report.

    ERIC Educational Resources Information Center

    Espy, John; And Others

    A project was conducted to field test selected first- and second-year courses in a postsecondary nuclear quality assurance/quality control (QA/QC) technician curriculum and to develop the teaching/learning modules for seven technical specialty courses remaining in the QA/QC technician curriculum. The field testing phase of the project involved the…

  2. Quality First in Education... Why Not? Using Quality and Productivity Methods To Improve Schools.

    ERIC Educational Resources Information Center

    Spanbauer, Stanley J.; Hillman, Jo Ann

    A description is provided of the implementation at Fox Valley Technical College (FVTC), Wisconsin, of the Quality First Process Model, which was adapted from a model commonly used in manufacturing and service industries. The model uses private sector quality and productivity procedures and new management styles to serve students more effectively,…

  3. [Text Comprehensibility of Hospital Report Cards].

    PubMed

    Sander, U; Kolb, B; Christoph, C; Emmert, M

    2016-12-01

    Objectives: Recently, the number of hospital report cards that compare quality of hospitals and present information from German quality reports has greatly increased. Objectives of this study were to a) identify suitable methods for measuring the readability and comprehensibility of hospital report cards, b) to obtain reliable information on the comprehensibility of texts for laymen, c) to give recommendations for improvements and d) to recommend public health actions. Methods: The readability and comprehensibility of the texts were tested with a) a computer-aided evaluation of formal text characteristics (readability indices Flesch (German formula) and 1. Wiener Sachtextformel formula), b) an expert-based heuristic analysis of readability and comprehensibility of texts (counting technical terms and analysis of text simplicity as well as brevity and conciseness using the Hamburg intelligibility model) and c) a survey of subjects about the comprehensibility of individual technical terms, the assessment of the comprehensibility of the presentations and the subjects' decisions in favour of one of the 5 presented clinics due to the better quality of data. In addition, the correlation between the results of the text analysis with the results from the survey of subjects was tested. Results: The assessment of texts with the computer-aided evaluations showed poor comprehensibility values. The assessment of text simplicity using the Hamburg intelligibility model showed poor comprehensibility values (-0.3). On average, 6.8% of the words used were technical terms. A review of 10 technical terms revealed that in all cases only a minority of respondents (from 4.4% to 39.1%) exactly knew what was meant by each of them. Most subjects (62.4%) also believed that unclear terms worsened their understanding of the information offered. The correlation analysis showed that presentations with a lower frequency of technical terms and better values for the text simplicity were better understood. Conclusion: The determination of the frequency of technical terms and the assessment of text simplicity using the Hamburg intelligibility model were suitable methods to determine the readability and comprehensibility of presentations of quality indicators. The analysis showed predominantly poor comprehensibility values and indicated the need to improve the texts of report cards. © Georg Thieme Verlag KG Stuttgart · New York.

  4. E-Quality in the Workplace: Quality Circles or Quality of Working Life Programs in the US.

    ERIC Educational Resources Information Center

    Savage, Grant T.; Romano, Richard

    Quality Circle (QC) and Quality of Working Life (QWL) in the United States are similar in that both stress participative decision making, preserve management's prerogative to have the final say, and are voluntary. QC and QWL programs differ, however, in that labor unions are more involved in QWLs; QCs deal only with technical problems related to…

  5. Radiographic evaluation of root canal fillings accomplished by undergraduate dental students.

    PubMed

    Yavari, Hamidreza; Samiei, Mohammad; Shahi, Shahriar; Borna, Zahra; Abdollahi, Amir Ardalan; Ghiasvand, Negar; Shariati, Gholamreza

    2015-01-01

    The purpose of this study was to evaluate the radiographic quality of root canal fillings by fourth-, fifth-, and sixth-year undergraduate students at Tabriz Faculty of Dentistry between 2006 and 2012. A total of 1183 root canal fillings in 620 teeth were evaluated by two investigators (and in case of disagreement by a third investigator) regarding the presence or absence of under-fillings, over-fillings and perforations. For each tooth, preoperative, working and postoperative radiographs were checked. The Pearson's chi-square test was used for statistical evaluation of the data. Inter-examiner agreement was measured by Cohen's kappa (k) values. The level of significance was set at 0.05. Total frequencies of over-filling, under-filling and perforation were 5.6%, 20.4% and 1.9%, respectively. There were significant differences between frequencies of over- and under-fillings (P<0.05). Unacceptable quality, under- and over-fillings were detected in 27.9% of 1183 evaluated canals. The technical quality of root canal therapies performed by undergraduate dental students using step-back preparation and lateral compaction techniques was unacceptable in almost one-fourth of the cases.

  6. Training experiences immediately after medical school.

    PubMed

    Roche, A M; Sanson-Fisher, R W; Cockburn, J

    1997-01-01

    Trainees in all teaching hospitals in New South Wales were surveyed using a self-completion, postal questionnaire to assess perceptions of the quality and extent of training received for interactional and technical skills. The response rate was 67.1%. Mean age was 25.4 years and 38.8% were female. Overall, training was found to be generally poor in terms of time and educational strategies used. Interactional skills were found to receive lower levels of training than technical skills both prior to and during the intern year with significantly fewer (P < 0.000) educational strategies reported for training received in interactional skills than for technical skills. Trainees' perceptions of the adequacy of training was significantly more negative for interactional than technical skills (P < 0.001). Assessment of competence was also significantly lower for interactional than technical skills (P < 0.001). On average, fewer than one in three trainees considered themselves to be competent in interactional skills compared to two-thirds who reported themselves as competent for technical skills. The findings of this study highlight the need for improved efforts with regard to both the quality and quantity of training provided during the intern year. Considerable scope exists for improved educational experiences for both interactional and technical skill areas, but particularly for interactional skills. Overall, greater use of a range of basic educational strategies such as the provision of 'observation' and 'critical feedback' is indicated. Efforts also need to be directed toward the training of clinical educators to optimize the potential of the preregistration period.

  7. Non-technical skills of the operating theatre scrub nurse: literature review.

    PubMed

    Mitchell, Lucy; Flin, Rhona

    2008-07-01

    This paper is a report of a review to identify the non-technical (cognitive and social) skills used by scrub nurses. Recognition that failures in non-technical skills contributed to accidents in high-risk industries led to the development of research programmes to study the role of cognition and social interactions in operational safety. Recently, psychological research in operating theatres has revealed the importance of non-technical skills in safe and efficient performance. Most of the studies to date have focused on anaesthetists and surgeons. On-line sources and university library catalogues, publications of the Association for Perioperative Practice, National Association of Theatre Nurses and Association of Peri-Operative Registered Nurses were searched in 2007. Studies were included in the review if they presented data from scrub nurses on one or more of their non-technical skills. These findings were examined in relation to an existing medical non-technical skills framework with categories of communication, teamwork, leadership, situation awareness and decision-making. Of 424 publications retrieved, 13 were reviewed in detail. Ten concerned communication and eight of those also had data on teamwork. In 11 papers teamwork was examined, and one focused on nurses' situation awareness, teamwork and communication. None of the papers we reviewed examined leadership or decision-making by scrub nurses. Further work is needed to identify formally the non-technical skills which are important to the role of scrub nurse and then to design training in the identified non-technical skills during the education and development of scrub nurses.

  8. Focused Assessment with Sonography for Trauma in weightlessness: a feasibility study

    NASA Technical Reports Server (NTRS)

    Kirkpatrick, Andrew W.; Hamilton, Douglas R.; Nicolaou, Savvas; Sargsyan, Ashot E.; Campbell, Mark R.; Feiveson, Alan; Dulchavsky, Scott A.; Melton, Shannon; Beck, George; Dawson, David L.

    2003-01-01

    BACKGROUND: The Focused Assessment with Sonography for Trauma (FAST) examines for fluid in gravitationally dependent regions. There is no prior experience with this technique in weightlessness, such as on the International Space Station, where sonography is currently the only diagnostic imaging tool. STUDY DESIGN: A ground-based (1 g) porcine model for sonography was developed. We examined both the feasibility and the comparative performance of the FAST examination in parabolic flight. Sonographic detection and fluid behavior were evaluated in four animals during alternating weightlessness (0 g) and hypergravity (1.8 g) periods. During flight, boluses of fluid were incrementally introduced into the peritoneal cavity. Standardized sonographic windows were recorded. Postflight, the video recordings were divided into 169 20-second segments for subsequent interpretation by 12 blinded ultrasonography experts. Reviewers first decided whether a video segment was of sufficient diagnostic quality to analyze (determinate). Determinate segments were then analyzed as containing or not containing fluid. A probit regression model compared the probability of a positive fluid diagnosis to actual fluid levels (0 to 500 mL) under both 0-g and 1.8-g conditions. RESULTS: The in-flight sonographers found real-time scanning and interpretation technically similar to that of terrestrial conditions, as long as restraint was maintained. On blinded review, 80% of the recorded ultrasound segments were considered determinate. The best sensitivity for diagnosis in 0 g was found to be from the subhepatic space, with probability of a positive fluid diagnosis ranging from 9% (no fluid) to 51% (500 mL fluid). CONCLUSIONS: The FAST examination is technically feasible in weightlessness, and merits operational consideration for clinical contingencies in space.

  9. WETLANDS AND WATER QUALITY TRADING: REVIEW OF CURRENT SCIENCE AND ECONOMIC PRACTICES WITH SELECTED CASE STUDIES

    EPA Science Inventory

    The study evaluates the technical, economic, and administrative aspects of establishing water quality trading (WQT) programs where the nutrient removal capacity of wetlands is used to improve water quality. WQT is a potentially viable approach for wastewater dischargers to cost-e...

  10. Service providers' experiences of using a telehealth network 12 months after digitisation of a large Australian rural mental health service.

    PubMed

    Newman, Lareen; Bidargaddi, Niranjan; Schrader, Geoffrey

    2016-10-01

    Despite evidence of benefits of telehealth networks in increasing access to, or providing, previously unavailable mental health services, care providers still prefer traditional approaches. For psychiatric assessment, digital technology can offer improvements over analog systems for the technical and, subsequently, the social quality of provider-client interaction. This is in turn expected to support greater provider uptake and enhanced patient benefits. Within the framework of Innovation Diffusion Theory, to study service providers' experiences of an existing regional telehealth network for mental health care practice twelve months after digitisation in order to identify the benefits of digital telehealth over an analog system for mental health care purposes in rural Australia. Qualitative interviews and focus groups were conducted with over 40 service providers from June to September 2013 in South Australia, ranging from the metropolitan central operations to health providers located up to 600km away in rural and remote areas of the same state. Participants included rural mental health teams, directors of nursing at rural hospitals, metropolitan-based psychiatrists and registrars, the metropolitan-based mental health team dedicated to rural provider support, rural GPs, administrative staff, and the executive group of the state rural health department. Fieldwork was conducted 12 months after the analog system was digitised. The interview and focus group data were analysed using thematic analysis, focusing on three key areas of innovation diffusion theory: relative advantage, technical complexity and technical compatibility. Five themes with 11 sub-themes were identified: (1) "Existing Uses", with three sub-themes: current mental health use, use by GPs, and use for staff support; (2) "Relative Advantage", with four sub-themes: improved technical quality, improved clinical practice, time and cost benefits for providers, and improved patient care; (3) "Technical Complexity"; (4) "Technical Compatibility" with two sub-themes: technical-clinical and technical-administrative; and (5) "Broader Organisational Culture", with two sub-themes: organizational policy support and 'digital telehealth' culture. The digitised telehealth network was generally well received by providers and adopted into clinical practice. Compared with the previous analog system, staff found advantages in better visual and audio quality, more technical stability with less "drop-out", less time delay to conversations and less confusion for clients. Despite these advantages, providers identified a range of challenges to starting or continuing use and they recommended improvements to increase uptake among mental health service providers and other providers (including GPs), and to clinical uses other than mental health. To further increase uptake and impact of telehealth-mediated mental health care in rural and remote areas, even with a high quality digital system, future research must design innovative care models, consider time and cost incentives for providers to use telehealth, and must focus not only on technical training but also how to best integrate technology with clinical practice and must develop an organization-wide digital telehealth culture. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  11. [Contemporary solutions for better air quality at electric welders workplace].

    PubMed

    Markova, O L; Ivanova, E V

    2015-01-01

    The article deals with hygienic evaluation of electric welder's workplace, concerning chemical factor, with technical solutions on organization of supply-and-exhaust ventilation and methods to improve air quality in various welding tasks.

  12. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... be designed, implemented, and reviewed to monitor the conduct of each step of the testing process. (b... sample and the error is determined to be technical or methodological, the licensee or other entity shall...

  13. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... be designed, implemented, and reviewed to monitor the conduct of each step of the testing process. (b... sample and the error is determined to be technical or methodological, the licensee or other entity shall...

  14. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... be designed, implemented, and reviewed to monitor the conduct of each step of the testing process. (b... sample and the error is determined to be technical or methodological, the licensee or other entity shall...

  15. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... be designed, implemented, and reviewed to monitor the conduct of each step of the testing process. (b... sample and the error is determined to be technical or methodological, the licensee or other entity shall...

  16. 10 CFR 26.167 - Quality assurance and quality control.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... be designed, implemented, and reviewed to monitor the conduct of each step of the testing process. (b... sample and the error is determined to be technical or methodological, the licensee or other entity shall...

  17. Report: Procedural Review of EPA’s Greenhouse Gases Endangerment Finding Data Quality Processes

    EPA Pesticide Factsheets

    Report #11-P-0702, September 26, 2011. EPA met statutory requirements for rulemaking and generally followed requirements and guidance related to ensuring the quality of the supporting technical information.

  18. The Oregon Career and Technical Education Study

    ERIC Educational Resources Information Center

    Klein, Steven; Richards, Amanda

    2008-01-01

    Oregon educators, policymakers, and business people are working together to increase the number and quality of Career and Technical Education (CTE) programs in secondary and postsecondary institutions. CTE is an integral component of Oregon's education and workforce development system and prepares students for careers in areas ranging from the…

  19. 40 CFR 52.2732 - Small business technical and environmental compliance assistance program.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... (CONTINUED) Puerto Rico § 52.2732 Small business technical and environmental compliance assistance program. On November 16, 1992, the Puerto Rico Environmental Quality Board submitted a plan for the... Assistance Program for incorporation in the Puerto Rico state implementation plan. This plan meets the...

  20. 40 CFR 52.2732 - Small business technical and environmental compliance assistance program.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... (CONTINUED) Puerto Rico § 52.2732 Small business technical and environmental compliance assistance program. On November 16, 1992, the Puerto Rico Environmental Quality Board submitted a plan for the... Assistance Program for incorporation in the Puerto Rico state implementation plan. This plan meets the...

  1. 40 CFR 52.2732 - Small business technical and environmental compliance assistance program.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... (CONTINUED) Puerto Rico § 52.2732 Small business technical and environmental compliance assistance program. On November 16, 1992, the Puerto Rico Environmental Quality Board submitted a plan for the... Assistance Program for incorporation in the Puerto Rico state implementation plan. This plan meets the...

  2. NASA scientific and technical information for the 1990s

    NASA Technical Reports Server (NTRS)

    Cotter, Gladys A.

    1990-01-01

    Projections for NASA scientific and technical information (STI) in the 1990s are outlined. NASA STI for the 1990s will maintain a quality bibliographic and full-text database, emphasizing electronic input and products supplemented by networked access to a wide variety of sources, particularly numeric databases.

  3. Critical Pedagogy for Vocational Education: The Practice with Novice Professionals.

    ERIC Educational Resources Information Center

    Askins, K. Brent; Galloy, Michael J.

    The Georgia Instructor Academy (GIA) initiative is intended to provide staff development activities that enhance the quality of instruction delivered at the technical institutes. Before GIA could become functional, the following significant changes in the state's postsecondary technical education system had to occur: (1) creation of the Georgia…

  4. Technical Efficiency and Productivity for Higher Education Institutions in Sweden

    ERIC Educational Resources Information Center

    Andersson, C.; Antelius, J.; Månsson, J.; Sund, K.

    2017-01-01

    This study investigates technical efficiency and productivity for Swedish higher education institutions (HEIs). One identified problem in previous research concerns adjusting efficiency scores for input quality. This problem is avoided using grades from upper-secondary schools. A second problem concerns heterogeneity with respect to subjects and…

  5. 10 CFR 52.17 - Contents of applications; technical information.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... NUCLEAR POWER PLANTS Early Site Permits § 52.17 Contents of applications; technical information. (a) For..., and thermal power level of the facilities, or range of possible facilities, for which the site may be... forth the requirements for quality assurance programs for nuclear power plants. The description of the...

  6. 10 CFR 52.17 - Contents of applications; technical information.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... NUCLEAR POWER PLANTS Early Site Permits § 52.17 Contents of applications; technical information. (a) For..., and thermal power level of the facilities, or range of possible facilities, for which the site may be... forth the requirements for quality assurance programs for nuclear power plants. The description of the...

  7. 10 CFR 52.17 - Contents of applications; technical information.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... NUCLEAR POWER PLANTS Early Site Permits § 52.17 Contents of applications; technical information. (a) For..., and thermal power level of the facilities, or range of possible facilities, for which the site may be... forth the requirements for quality assurance programs for nuclear power plants. The description of the...

  8. 10 CFR 52.17 - Contents of applications; technical information.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... NUCLEAR POWER PLANTS Early Site Permits § 52.17 Contents of applications; technical information. (a) For..., and thermal power level of the facilities, or range of possible facilities, for which the site may be... forth the requirements for quality assurance programs for nuclear power plants. The description of the...

  9. 78 FR 70040 - Draft Integrated Science Assessment for Nitrogen Oxides-Health Criteria

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-11-22

    ... (NO 2 ). The Integrated Science Assessment (ISA), in conjunction with additional technical and policy... the secondary (welfare-based) NAAQS for NO 2 , in conjunction with a review of the secondary NAAQS for... called an Air Quality Criteria Document). The ISA, in conjunction with additional technical and policy...

  10. Additional Final Area Designations and Technical Amendment for the 2012 Annual Fine Particle Standard Established in 2012 - Mar 2015

    EPA Pesticide Factsheets

    EPA is establishing or revising initial area designations and a technical amendment to correct an inadvertent error in the initial designation for one area for the 2012 annual national ambient air quality standards for fine particle pollution.

  11. Low-Tech Education Threatens the High-Tech Future.

    ERIC Educational Resources Information Center

    Business Week, 1983

    1983-01-01

    Indicating that the quality of scientific/technical education in the United States has been slipping since the brief surge of attention in the decade following Sputnik, discusses the need for upgrading science/technical education. Includes efforts currently under way, including financial support by industry and donations of equipment and computers…

  12. Contract management using cause-effect clues in service worksheets.

    PubMed

    Chen, J H

    1996-01-01

    Sophisticated equipment often needs intensive technical resources to maintain its system availability. Service contracts can be an easy channel to outside technical resources. Usually, a service contract purchaser only sees its cost instead of its maintenance quality. A system's needs, however, depend on the trade-off between the cost paid and the quality received. If a clinical engineer can actively interpret and integrate the cause-effect consequences on the compiled service worksheets, those clues can serve as a criterion to justify the quality and the cost-effectiveness of a service contract. Through the analysis of the service labor consumed, the justification of the parts replaced, and the assessment of the "fit" to system availability, this paper provides a cost-effective tool for equipment management.

  13. Examining Differences between Light and Heavier Smoking Vocational Students: A Pilot Study

    ERIC Educational Resources Information Center

    de Araujo, Vanessa A.; Loukas, Alexandra; Gottlieb, Nell H.

    2011-01-01

    Objective: To examine differences between light and heavier smoking vocational/technical students in tobacco use, related behaviors, and cessation. Design: Cross-sectional. Setting and Methods: Two hundred and four smokers attending two vocational/technical colleges in east Texas, USA, completed an anonymous survey during a regularly scheduled…

  14. Communication Requirements of Employees of Business and Industry Represented by Areas of Technological Study at Southern Maine Vocational Technical Institute.

    ERIC Educational Resources Information Center

    Cary, Penny J.; Sweeney, Kevin F.

    A study examined the need and demand for communication skills for employees in the technical fields for which Southern Maine Vocational Technical Institute offers programs of academic preparation. Two members of the Institute's English Department interviewed representatives of organizations that have hired technical program graduates. Further…

  15. Work Values and Job Satisfaction of Arkansas Business Educators in Secondary Systems and Community/Technical Colleges.

    ERIC Educational Resources Information Center

    Funderburg, Dinnah L.; Kapes, Jerome T.

    The work values and job satisfaction of Arkansas business educators in secondary school systems and community/technical colleges were examined through a survey of a random sample of 129 of Arkansas' 926 secondary and community/technical college business educators. Of those teachers sent surveys (67 secondary and 62 community/technical college…

  16. The Technical Communicator as Advocate: Integrating a Social Justice Approach in Technical Communication

    ERIC Educational Resources Information Center

    Jones, Natasha N.

    2016-01-01

    This article argues for the need for a social justice approach to technical communication research and pedagogy. Given previous calls by scholars in technical and professional communication (TPC) for an attention to diversity, inclusion, and equality, the author examines the place and purpose of social justice in TPC and provides useful approaches…

  17. A Procedural Skills OSCE: Assessing Technical and Non-Technical Skills of Internal Medicine Residents

    ERIC Educational Resources Information Center

    Pugh, Debra; Hamstra, Stanley J.; Wood, Timothy J.; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

    2015-01-01

    Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal…

  18. Technical specifications for mechanical recycling of agricultural plastic waste.

    PubMed

    Briassoulis, D; Hiskakis, M; Babou, E

    2013-06-01

    Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plastic waste management chain. They constitute the base for the best economical and environmental valorisation of the APW. The analysis of the APW streams conducted across Europe in the framework of the European project "LabelAgriWaste" revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process ("Quality I") and another one for plastic profile production process ("Quality II"). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities in protected cultivations in Europe. The adoption of the proposed specifications could transform this waste stream into a labelled commodity traded freely in the market and will constitute the base for the best economical and environmental valorisation of the APW. Copyright © 2013 Elsevier Ltd. All rights reserved.

  19. Technical - Economic Research for Passive Buildings

    NASA Astrophysics Data System (ADS)

    Miniotaite, Ruta

    2017-10-01

    A newly constructed passive house must save 80 % of heat resources; otherwise it is not a passive house. The heating energy demand of a passive building is less than 15 kWh/m2 per year. However, a passive house is something more than just an energy-saving house. This concept involves sustainable, high-quality, valuable, healthy and durable construction. Features of a passive house: high insulation of envelope components, high-quality windows, good tightness of the building, regenerative ventilation system and elimination of thermal bridges. The Energy Performance of Buildings Directive (EPBD) 61 requires all new public buildings to become near-zero energy buildings by 2019 and will be extended to all new buildings by 2021. This concept involves sustainable, high-quality, valuable, healthy and durable construction. Foundation, walls and roofs are the most essential elements of a house. The type of foundation for a private house is selected considering many factors. The article examines technological and structural solutions for passive buildings foundation, walls and roofs. The technical-economic comparison of the main structures of a passive house revealed that it is cheaper to install an adequately designed concrete slab foundation than to build strip or pile foundation and the floor separately. Timber stud walls are the cheapest wall option for a passive house and 45-51% cheaper compared to other options. The comparison of roofs and ceilings showed that insulation of the ceiling is 25% more efficient than insulation of the roof. The comparison of the main envelope elements efficiency by multiple-criteria evaluation methods showed that it is economically feasible to install concrete slab on ground foundation, stud walls with sheet cladding and a pitched roof with insulated ceiling.

  20. Technical Quality of Root Canal Treatment Performed by Undergraduate Clinical Students of Isfahan Dental School.

    PubMed

    Saatchi, Masoud; Mohammadi, Golshan; Vali Sichani, Armita; Moshkforoush, Saba

    2018-01-01

    The aim of the present study was to evaluate the radiographic quality of RCTs performed by undergraduate clinical students of Dental School of Isfahan University of Medical Sciences. In this cross sectional study, records and periapical radiographs of 1200 root filled teeth were randomly selected from the records of patients who had received RCTs in Dental School of Isfahan University of Medical Sciences from 2013 to 2015. After excluding 416 records, the final sample consisted of 784 root-treated teeth (1674 root canals). Two variables including the length and the density of the root fillings were examined. Moreover, the presence of ledge, foramen perforation, root perforation and fractured instruments were also evaluated as procedural errors. Descriptive statistics were used for expressing the frequencies of criteria and chi square test was used for comparing tooth types, tooth locations and academic level of students ( P <0.05). The frequency of root canals with acceptable filling was 54.1%. Overfilling was found in 11% of root canals, underfilling in 8.3% and inadequate density in 34.6%. No significant difference was found between the frequency of acceptable root fillings in the maxilla and mandible ( P =0.072). More acceptable fillings were found in the root canals of premolars (61.3%) than molars (51.3%) ( P =0.001). The frequency of procedural errors was 18.6%. Ledge was found in 12.5% of root canals, foramen perforation in 2%, root perforation in 2.4% and fractured instrument in 2%. Procedural errors were more frequent in the root canals of molars (22.5%) than the anterior teeth (12.3%) ( P =0.003) and the premolars (9.5%) ( P <0.001). Technical quality of RCTs performed by clinical students was not satisfactory and incidence of procedural errors was considerable.

  1. Understanding why an active video game intervention did not improve motor skill and physical activity in children with developmental coordination disorder: A quantity or quality issue?

    PubMed

    Howie, Erin K; Campbell, Amity C; Abbott, Rebecca A; Straker, Leon M

    2017-01-01

    Active video games (AVGs) have been identified as a novel strategy to improve motor skill and physical activity in clinical populations. A recent cross-over randomized trial found AVGs to be ineffective at improving motor skill and physical activity in the home-environment for children with or at-risk for developmental coordination disorder (DCD). The study purpose was to better understand why the intervention had been ineffective by examining the quantity and quality of AVG play during an AVG intervention for children with or at-risk for DCD. Participants (n=21, ages 9-12) completed the 16 week AVG intervention. Detailed quantitative and qualitative data were systematically triangulated to obtain the quantity of exposure (AVG exposure over time, patterns of exposure) and quality of use (game selection, facilitators and barriers to play). The median AVG dose (range 30-35min/day) remained relatively stable across the intervention and met the prescribed dose. Play quality was impacted by game selection, difficulty playing games, lack of time, illness, technical difficulties and boredom. The ineffectiveness of a home-based AVG intervention may be due to quality of play. Strategies to improve the quality of game play may help realize the potential benefits of AVGs as a clinical tool for children with DCD. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Impact of the World Health Organization's Decision-Making Tool for Family Planning Clients and Providers on the quality of family planning services in Iran.

    PubMed

    Farrokh-Eslamlou, Hamidreza; Aghlmand, Siamak; Eslami, Mohammad; Homer, Caroline S E

    2014-04-01

    We investigated whether use of the World Health Organization's (WHO's) Decision-Making Tool (DMT) for Family Planning Clients and Providers would improve the process and outcome quality indicators of family planning (FP) services in Iran. The DMT was adapted for the Iranian setting. The study evaluated 24 FP quality key indicators grouped into two main areas, namely process and outcome. The tool was implemented in 52 urban and rural public health facilities in four selected and representative provinces of Iran. A pre-post methodology was undertaken to examine whether use of the tool improved the quality of FP services and client satisfaction with the services. Quantitative data were collected through observations of counselling and exit interviews with clients using structured questionnaires. Different numbers of FP clients were recruited during the baseline and the post-intervention rounds (n=448 vs 547, respectively). The DMT improved many client-provider interaction indicators, including verbal and non-verbal communication (p<0.05). The tool also impacted positively on the client's choice of contraceptive method, providers' technical competence, and quality of information provided to clients (p<0.05). Use of the tool improved the clients' satisfaction with FP services (from 72% to 99%; p<0.05). The adapted WHO's DMT has the potential to improve the quality of FP services.

  3. Annual Technical Symposium (28th): Achieving Technical and Management Excellence. Held in Arlington, Virginia on April 11, 1991,

    DTIC Science & Technology

    1991-04-11

    Perplexed: Think Energy Again. Video Enhanced SECAT - An Energy Program; Quality Ship Service Power with an Integrated Diesel Electric Propulsion...DIesign Branch (5011), NAVSEA * "Think Energy Again! Video Enhanced SECAT - 5 An Energy Program"’ Hasan Pehlivan, Mechanical Engineer/Ship Trials, Surface...1.015, or 1.5% increase.) Association of Scientists and Engineers 28th Annual Technical Symposium, 11 April 1991 THINK ENERGY AGAIN! A VIDEO ENHANCED

  4. [Contribution to the establishment of quality assurance in five medical microbiology departments in Togo].

    PubMed

    Katawa, G; Kpotsra, A; Karou, D S; Eklou, M; Tayi, K E; de Souza, C

    2011-02-01

    In Togo, as in many other developing countries, there is a lack of data on quality control and assurance of laboratories. The present study aimed to access for the quality management system in five medical bacteriology laboratories in Togo. The study was conducted from May to August 2006. Data were recorded by an audit on the reliability of results and the technical organization of laboratories. The standard ISO 15189:2003, the Togolese guide of good laboratory practices (GBEA-Togo) and the WHO medical bacteriology standards were used as references. The results of the audit showed a lack of culture media in laboratories, inappropriate choice of culture media, partial identification of some microorganisms, variability of identification procedures, a lack of diagnostic reagents and an inability to identify some potentially pathogenic bacteria. Concerning the technical organization of laboratories, compliance average ranging from 25.8 to 54.8 % was recorded. This indicates a limited organization of such laboratories. The issue of this study showed that laboratories must be equipped, their technical organization should be improved and they must establish a program of equipment maintenance.

  5. Technical quality of root canal treatment of posterior teeth after rotary or hand preparation by fifth year undergraduate students, The University of Jordan.

    PubMed

    Abu-Tahun, Ibrahim; Al-Rabab'ah, Mohammad A; Hammad, Mohammad; Khraisat, Ameen

    2014-12-01

    The aim of this study was to investigate the technical quality of root canal treatment provided by the undergraduate students as their first experience in molar endodontics using nickel-titanium (NiTi) files in a crown-down approach compared with stainless steel standard technique. This study was carried out by the fifth year undergraduate students attending peer review sessions as a part of their training programme, using two different questionnaires to assess the overall technical quality and potential problems regarding endodontic complications after root canal preparation with these two techniques. The overall results indicated a statistically significant difference in the performance of the two instrument techniques in difficult cases showing better performance of the NiTi system and mean rotary preparation time (P < 0.001). Under the conditions of this study, novice dental students, using NiTi ProTaper rotary files, were able to prepare root canals faster with more preparation accuracy compared with canals of same teeth prepared with hand instruments. © 2014 Australian Society of Endodontology.

  6. Important technical parameters are not presented in reports of intraoral digital radiography in endodontic treatment: recommendations for future studies.

    PubMed

    Konishi, Masaru; Lindh, Christina; Nilsson, Mats; Tanimoto, Keiji; Rohlin, Madeleine

    2012-08-01

    The aims of this study were to review the literature on intraoral digital radiography in endodontic treatment with focus on technical parameters and to propose recommendations for improving the quality of reports in future publications. Two electronic databases were searched. Titles and abstracts were selected according to preestablished criteria. Data were extracted using a model of image acquisition and interpretation. The literature search yielded 233 titles and abstracts; 61 reports were read in full text. Recent reports presented technical parameters more thoroughly than older reports. Most reported important parameters for the x-ray unit, but for image interpretation only about one-half of the publications cited resolution of the display system and fewer than one-half bit depth of the graphics card. The methodologic quality of future publications must be improved to permit replication of studies and comparison of results between studies in dental digital radiography. Our recommendations can improve the quality of studies on diagnostic accuracy. Copyright © 2012 Mosby, Inc. All rights reserved.

  7. Home telemonitoring of vital signs--technical challenges and future directions.

    PubMed

    Celler, Branko G; Sparks, Ross S

    2015-01-01

    The telemonitoring of vital signs from the home is an essential element of telehealth services for the management of patients with chronic conditions, such as congestive heart failure (CHF), chronic obstructive pulmonary disease (COPD), diabetes, or poorly controlled hypertension. Telehealth is now being deployed widely in both rural and urban settings, and in this paper, we discuss the contribution made by biomedical instrumentation, user interfaces, and automated risk stratification algorithms in developing a clinical diagnostic quality longitudinal health record at home. We identify technical challenges in the acquisition of high-quality biometric signals from unsupervised patients at home, identify new technical solutions and user interfaces, and propose new measurement modalities and signal processing techniques for increasing the quality and value of vital signs monitoring at home. We also discuss use of vital signs data for the automated risk stratification of patients, so that clinical resources can be targeted to those most at risk of unscheduled admission to hospital. New research is also proposed to integrate primary care, hospital, personal genomic, and telehealth electronic health records, and apply predictive analytics and data mining for enhancing clinical decision support.

  8. Technical specifications for mechanical recycling of agricultural plastic waste

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Briassoulis, D., E-mail: briassou@aua.gr; Hiskakis, M.; Babou, E.

    Highlights: • Technical specifications for agricultural plastic wastes (APWs) recycling proposed. • Specifications are the base for best economical and environmental APW valorisation. • Analysis of APW reveals inherent characteristics and constraints of APW streams. • Thorough survey on mechanical recycling processes and industry as it applies to APW. • Specifications for APW recycling tested, adjusted and verified through pilot trials. - Abstract: Technical specifications appropriate for the recycling of agricultural plastic wastes (APWs), widely accepted by the recycling industry were developed. The specifications establish quality standards to be met by the agricultural plastics producers, users and the agricultural plasticmore » waste management chain. They constitute the base for the best economical and environmental valorisation of the APW. The analysis of the APW streams conducted across Europe in the framework of the European project “LabelAgriWaste” revealed the inherent characteristics of the APW streams and the inherent constraints (technical or economical) of the APW. The APW stream properties related to its recycling potential and measured during pilot trials are presented and a subsequent universally accepted simplified and expanded list of APW recycling technical specifications is proposed and justified. The list includes two sets of specifications, applied to two different quality categories of recyclable APW: one for pellet production process (“Quality I”) and another one for plastic profile production process (“Quality II”). Parameters that are taken into consideration in the specifications include the APW physical characteristics, contamination, composition and degradation. The proposed specifications are focused on polyethylene based APW that represents the vast majority of the APW stream. However, the specifications can be adjusted to cover also APW of different materials (e.g. PP or PVC) that are found in very small quantities in protected cultivations in Europe. The adoption of the proposed specifications could transform this waste stream into a labelled commodity traded freely in the market and will constitute the base for the best economical and environmental valorisation of the APW.« less

  9. Quality-assurance plan for water-resources activities of the U.S. Geological Survey in Idaho

    USGS Publications Warehouse

    Packard, F.A.

    1996-01-01

    To ensure continued confidence in its products, the Water Resources Division of the U.S. Geological Survey implemented a policy that all its scientific work be performed in accordance with a centrally managed quality-assurance program. This report establishes and documents a formal policy for current (1995) quality assurance within the Idaho District of the U.S. Geological Survey. Quality assurance is formalized by describing district organization and operational responsibilities, documenting the district quality-assurance policies, and describing district functions. The districts conducts its work through offices in Boise, Idaho Falls, Twin Falls, Sandpoint, and at the Idaho National Engineering Laboratory. Data-collection programs and interpretive studies are conducted by two operating units, and operational and technical assistance is provided by three support units: (1) Administrative Services advisors provide guidance on various personnel issues and budget functions, (2) computer and reports advisors provide guidance in their fields, and (3) discipline specialists provide technical advice and assistance to the district and to chiefs of various projects. The district's quality-assurance plan is based on an overall policy that provides a framework for defining the precision and accuracy of collected data. The plan is supported by a series of quality-assurance policy statements that describe responsibilities for specific operations in the district's program. The operations are program planning; project planning; project implementation; review and remediation; data collection; equipment calibration and maintenance; data processing and storage; data analysis, synthesis, and interpretation; report preparation and processing; and training. Activities of the district are systematically conducted under a hierarchy of supervision an management that is designed to ensure conformance with Water Resources Division goals quality assurance. The district quality-assurance plan does not describe detailed technical activities that are commonly termed "quality-control procedures." Instead, it focuses on current policies, operations, and responsibilities that are implemented at the management level. Contents of the plan will be reviewed annually and updated as programs and operations change.

  10. Pregnancy care in Germany, France and Japan: an international comparison of quality and efficiency using structural equation modelling and data envelopment analysis.

    PubMed

    Rump, A; Schöffski, O

    2018-07-01

    Healthcare systems in developed countries may differ in financing and organisation. Maternity services and delivery are particularly influenced by culture and habits. In this study, we compared the pregnancy care quality and efficiency of the German, French and Japanese healthcare systems. Comparative healthcare data analysis. In an international comparison based mainly on Organisation for Economic Co-operation and Development (OECD) indicators, we analysed the health resources significantly affecting pregnancy care and quantified its quality using structural equation modelling. Pregnancy care efficiency was studied using data envelopment analysis. Pregnancy output was quantified overall or separately using indicators based on perinatal, neonatal or maternal mortality. The density of obstetricians, midwives, paediatricians and the average annual doctor's consultations were positively and the caesarean delivery rate negatively associated with pregnancy outcome. In the international comparison at an aggregate level, Japan ranked first for pregnancy care quality, whereas Germany and France were positioned in the second part of the ranking. Similarly, at an aggregate level, the Japanese system showed pure technical efficiency, whereas Germany and France revealed mediocre efficiency results. Perinatal, neonatal and maternal care quality and efficiency taken separately were quite similar and mediocre in Germany and France. In Japan, there was a marked difference between a highly effective and efficient care of the unborn and newborn baby, and a rather mediocre quality and efficiency of maternal care. Germany, France, and Japan have to struggle with quality and efficiency issues that are nevertheless different: in Germany and France, disappointing pregnancy care quality does not correspond to the high health care expenditures and lead to low technical efficiency. The Japanese system shows a high variability in outcomes and technical efficiency. Maternal care quality during delivery seems to be a particular issue that could possibly be addressed by legally implementing quality assurance systems with stricter rules for reimbursement in obstetrics. Copyright © 2018 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

  11. Measuring and Costing Quality in Education: Using Quality and Productivity Methods To Improve Schools.

    ERIC Educational Resources Information Center

    Spanbauer, Stanley J.

    The Measurement and Costing Model (MCM) described in this book was developed and tested at Fox Valley Technical College (FVTC), Wisconsin, to enhance the college's quality improvement process and to serve as a guide to other institutions interested in improving their quality. The book presents a description of the model and outlines seven steps…

  12. A Quality System for Education: Using Quality and Productivity Techniques To Save Our Schools.

    ERIC Educational Resources Information Center

    Spanbauer, Stanley J.; Hillman, Jo

    This book provides a case study of the implementation of a quality improvement model to improve educational services at Fox Valley Technical College (FVTC), in Appleton, Wisconsin. Chapter 1 describes the early stages of the implementation of the quality processes at FVTC. Chapter 2 discusses the role of the chief administrator as mentor and…

  13. Free smoking cessation mobile apps available in Australia: a quality review and content analysis.

    PubMed

    Thornton, Louise; Quinn, Catherine; Birrell, Louise; Guillaumier, Ashleigh; Shaw, Brad; Forbes, Erin; Deady, Mark; Kay-Lambkin, Frances

    2017-12-01

    This review aimed to identify free, high-quality, smoking cessation mobile applications (apps) that adhere to Australian smoking cessation treatment guidelines. A systematic search of smoking cessation apps was conducted using Google. The technical quality of relevant apps was rated using the Mobile Application Rating Scale. The content of apps identified as high quality was assessed for adherence to smoking cessation treatment guidelines. 112 relevant apps were identified. The majority were of poor technical quality and only six 'high-quality' apps were identified. These apps adhered to Australian treatment guidelines in part. The efficacy of two apps had been previously evaluated. In lieu of more substantial research in this area, it is suggested that the high-quality apps identified in this review may be more likely than other available apps to encourage smoking cessation. Implications for public health: Smoking cessation apps have the potential to address many barriers that prevent smoking cessation support being provided; however few high-quality smoking cessation apps are currently available in Australia, very few have been evaluated and the app market is extremely volatile. More research to evaluate smoking cessation apps, and sustained funding for evidence-based apps, is needed. © 2017 The Authors.

  14. Exploring the impact of word-of-mouth about Physicians' service quality on patient choice based on online health communities.

    PubMed

    Lu, Naiji; Wu, Hong

    2016-11-26

    Health care service is a high-credence service and patients may face difficulties ascertaining service quality in order to make choices about their available treatment options. Online health communities (OHCs) provide a convenient channel for patients to search for physicians' information, such as Word-of-Mouth (WOM), particularly on physicians' service quality evaluated by other patients. Existing studies from other service domains have proved that WOM impacts consumer choice. However, how patients make a choice based on physicians' WOM has not been studied, particularly with reference to different patient characteristics and by using real data. One thousand eight hundred fifty three physicians' real data were collected from a Chinese online health community. The data were analyzed using ordinary least squares (OLS) method. The study found that functional quality negatively moderated the relationship between technical quality and patient choice, and disease risk moderated the relationship between physicians' service quality and patient choice. Our study recommends that hospital managers need to consider the roles of both technical quality and functional quality seriously. Physicians should improve their medical skills and bedside manners based on the severity and type of disease to provide better service.

  15. Aviation Safety: Efforts to Implement Flight Operational Quality Assurance Programs

    DOT National Transportation Integrated Search

    1997-12-01

    Flight Operational Quality Assurance (FOQA) programs seek to use flight data to : detect technical flaws, unsafe practices, or conditions outside of desired : operating procedures early enough to allow timely intervention to avert : accidents or inci...

  16. BUILDING "BRIDGES" WITH QUALITY ASSURANCE

    EPA Science Inventory

    The papr describes how, rather than building "bridges" across centuries, quality assurance (QA) personnel have the opportunity to build bridges across technical disciplines, between public and private organizations, and between different QA groups. As reviewers and auditors of a...

  17. 26 CFR 601.106 - Appeals functions.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... obtain Appeals consideration in (1) all office interview or correspondence examination cases or (2) a... technical advice on any technical or procedural question that develops during the processing and... on any technical or procedural question arising in connection with a case described in subdivision (i...

  18. An Informatics Blueprint for Healthcare Quality Information Systems

    PubMed Central

    Niland, Joyce C.; Rouse, Layla; Stahl, Douglas C.

    2006-01-01

    There is a critical gap in our nation's ability to accurately measure and manage the quality of medical care. A robust healthcare quality information system (HQIS) has the potential to address this deficiency through the capture, codification, and analysis of information about patient treatments and related outcomes. Because non-technical issues often present the greatest challenges, this paper provides an overview of these socio-technical issues in building a successful HQIS, including the human, organizational, and knowledge management (KM) perspectives. Through an extensive literature review and direct experience in building a practical HQIS (the National Comprehensive Cancer Network Outcomes Research Database system), we have formulated an “informatics blueprint” to guide the development of such systems. While the blueprint was developed to facilitate healthcare quality information collection, management, analysis, and reporting, the concepts and advice provided may be extensible to the development of other types of clinical research information systems. PMID:16622161

  19. [ISO 15189 medical laboratory accreditation].

    PubMed

    Aoyagi, Tsutomu

    2004-10-01

    This International Standard, based upon ISO/IEC 17025 and ISO 9001, provides requirements for competence and quality that are particular to medical laboratories. While this International Standard is intended for use throughout the currently recognized disciplines of medical laboratory services, those working in other services and disciplines will also find it useful and appropriate. In addition, bodies engaged in the recognition of the competence of medical laboratories will be able to use this International Standard as the basis for their activities. The Japan Accreditation Board for Conformity Assessment (AB) and the Japanese Committee for Clinical Laboratory Standards (CCLS) are jointly developing the program of accreditation of medical laboratories. ISO 15189 requirements consist of two parts, one is management requirements and the other is technical requirements. The former includes the requirements of all parts of ISO 9001, moreover it includes the requirement of conformity assessment body, for example, impartiality and independence from any other party. The latter includes the requirements of laboratory competence (e.g. personnel, facility, instrument, and examination methods), moreover it requires that laboratories shall participate proficiency testing(s) and laboratories' examination results shall have traceability of measurements and implement uncertainty of measurement. Implementation of ISO 15189 will result in a significant improvement in medical laboratories management system and their technical competence. The accreditation of medical laboratory will improve medical laboratory service and be useful for patients.

  20. Quality user support: Supporting quality users

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Woolley, T.C.

    1994-12-31

    During the past decade, fundamental changes have occurred in technical computing in the oil industry. Technical computing systems have moved from local, fragmented quantity, to global, integrated, quality. The compute power available to the average geoscientist at his desktop has grown exponentially. Technical computing applications have increased in integration and complexity. At the same time, there has been a significant change in the work force due to the pressures of restructuring, and the increased focus on international opportunities. The profile of the user of technical computing resources has changed. Users are generally more mature, knowledgeable, and team oriented than theirmore » predecessors. In the 1990s, computer literacy is a requirement. This paper describes the steps taken by Oryx Energy Company to address the problems and opportunities created by the explosive growth in computing power and needs, coupled with the contraction of the business. A successful user support strategy will be described. Characteristics of the program include: (1) Client driven support; (2) Empowerment of highly skilled professionals to fill the support role; (3) Routine and ongoing modification to the support plan; (4) Utilization of the support assignment to create highly trained advocates on the line; (5) Integration of the support role to the reservoir management team. Results of the plan include a highly trained work force, stakeholder teams that include support personnel, and global support from a centralized support organization.« less

  1. Technical considerations and precautions in in situ bronchoalveolar lavage and alveolar infiltrating cells isolation in rats.

    PubMed

    Qamar, Wajhul

    2015-01-01

    Bronchoalveolar lavage fluid (BALF) is an important tool in experimental toxicology and pharmacology. A number of researchers have utilized BAL in studies involving rodents. However, the detailed procedure of performing BAL in rodents has rarely been reported. In the present article, in situ BAL in rats has been described with technical points that ensure the quality and validity of BALF samples. BAL was performed in rats of Wistar strain. Flow cytometry and microscopy were utilized to analyze the BAL cells. The collected volume of BALF was 84.32 ± 2.7% of instilled volume. Alveolar macrophages were found to be prevalent in normal lungs when analyzed under microscope and by flow cytometry. The main problem that one may face is the accidental contamination of BALF samples with blood of the animal itself. Presence of blood in BALF certainly adds a significant number of cells and other biochemical variables. No blood contamination was detected in BALF. Here, a simple procedure for BAL and collection of alveolar cells (macrophages in the present study) is explained with an emphasis on technical steps and precautions, which ensures the quality of the BALF samples. Data exhibit that there is no blood contamination in the BALF and provide evidence that the technical points considered in the procedure here are successful in maintaining the quality and validity of BALF samples.

  2. The Voices of English Women Technical Writers, 1641-1700: Imprints in the Evolution of Modern English Prose Style.

    ERIC Educational Resources Information Center

    Tebeaux, Elizabeth

    1998-01-01

    Examines the style of early women technical writers to show that plain English existed before Sir Francis Bacon and received its impetus from the utilitarian attitude that pervaded the 1475-1700 period. Finds that technical communication studied from this historical perspective deepens students' awareness of technical communication's roots in the…

  3. Promoting Teachers' Implementation of Classroom-Based Prevention Programming Through Coaching: The Mediating Role of the Coach-Teacher Relationship.

    PubMed

    Johnson, Stacy R; Pas, Elise T; Bradshaw, Catherine P; Ialongo, Nicholas S

    2018-05-01

    There is growing awareness of the importance of implementation fidelity and the supports, such as coaching, to optimize it. This study examined how coaching activities (i.e., check-ins, needs assessment, modeling, and technical assistance) related directly and indirectly to implementation dosage and quality of the PAX Good Behavior Game, via a mediating pathway through working relationship. Mediation analyses of 138 teachers revealed direct effects of modeling and working relationship on implementation dosage, whereas needs assessment was associated with greater dosage indirectly, by higher ratings of the working relationship. Understanding how coaching activities promote implementation fidelity elements has implications for improving program effectiveness.

  4. Does compliance make a facility safe?

    PubMed

    Pearson, Susan

    2013-04-01

    'Every defect is a treasure, if the company can uncover its cause and work to prevent it across the corporation' - Kiichiro Toyoda, founder, Toyota. This quote, as true in healthcare as it in the manufacturing sphere, set the tone for discussion at a recent Dublin conference, which examined the thorny issue of whether compliance is really enough to ensure safety. Focusing especially on water safety, the event aimed to promote collaboration and knowledge sharing between Irish and UK healthcare professionals, including technical services managers, infection control staff, quality and risk personnel, support service managers, hospital directors, and CEOs. Susan Pearson BSc, a freelance journalist and communications consultant specialising in medicine and the environment, reports.

  5. Imaging the neonate in the incubator: an investigation of the technical, radiological and nursing issues.

    PubMed

    Mutch, S J; Wentworth, S D P

    2007-11-01

    Modern neonatal incubators incorporate an X-ray tray device into the mattress support structure to facilitate patient examination with minimal disturbance and distress. However, the usual method of examination is to place the image plate directly underneath the baby. Users often cite radiological reasons for not using X-ray trays but modern quantitative evidence is lacking. This work looks at the technical and clinical aspects of imaging neonates in incubators and the impact that these may have in determining the imaging protocol. A number of hospitals were surveyed to determine their current method of examination and the reasons for their preference. Experimental measurements of the radiological impact of using (or not using) the X-ray tray were performed for a range of neonatal incubators. The average dose to the image plate was 5.9 microGy (range 5.4-6.4 microGy) for the "plate on mattress" method and 3.0 microGy (2.0-3.8 microGy) when using the tray--a 49% reduction owing to the mattress support materials. However, when using a computed radiography (CR) imaging system, the image quality differences were marginal. Survey results indicated that nurses preferred to use the tray but that radiographers were reluctant. We conclude that incubator manufacturers could do much to improve the radiological performance of their equipment and we offer recommendations. We also conclude that, with appropriate nurse and radiographer training and the advent of CR imaging systems, use of X-ray tray facilities may optimize imaging of the neonate in the incubator.

  6. Examining Co-Teaching through a Socio-Technical Systems Lens

    ERIC Educational Resources Information Center

    Isherwood, Robert S.; Barger-Anderson, Richard; Erickson, Matthew

    2012-01-01

    Qualitative research was conducted in a large suburban school district implementing co-teaching as a new service delivery model for special education. Researchers examined the changes that resulted from the new service delivery model using a socio-technical systems lens. This framework views schools as open systems that contain a structural, task,…

  7. Use of "t"-Test and ANOVA in Career-Technical Education Research

    ERIC Educational Resources Information Center

    Rojewski, Jay W.; Lee, In Heok; Gemici, Sinan

    2012-01-01

    Use of t-tests and analysis of variance (ANOVA) procedures in published research from three scholarly journals in career and technical education (CTE) during a recent 5-year period was examined. Information on post hoc analyses, reporting of effect size, alpha adjustments to account for multiple tests, power, and examination of assumptions…

  8. Technical and Non-Technical Programme Students' Attitudes and Reasons for Plagiarism

    ERIC Educational Resources Information Center

    Harji, Madhubala Bava; Ismail, Zalina; Chetty, Thiba Naraina; Letchumanan, Krishnaveni

    2017-01-01

    To date, plagiarism continues to be a widespread problem in higher education. Deemed to be endemic, researchers continue to examine various aspects of plagiarism, including students' perception, practices, attitudes and reasons for plagiarism, in addressing this growing concern. Most studies, however, tend to examine these aspects independently.…

  9. A Friend in Your Neighborhood: Local Risk Communication in a Technical Writing Classroom

    ERIC Educational Resources Information Center

    Rhodes, Lynne

    2009-01-01

    When examined rhetorically, Savannah River Site Community Preparedness Information calendars from 1994, 2004, and 2008 represent living rhetorical practices aimed at changing the public mind. My technical communication classroom at USC Aiken is uniquely situated for us to examine documents constantly generated by the site's Public Affairs…

  10. Peer Review of a Formal Verification/Design Proof Methodology

    NASA Technical Reports Server (NTRS)

    1983-01-01

    The role of formal verification techniques in system validation was examined. The value and the state of the art of performance proving for fault-tolerant compuers were assessed. The investigation, development, and evaluation of performance proving tools were reviewed. The technical issues related to proof methodologies are examined. The technical issues discussed are summarized.

  11. Highly Integrated Quality Assurance – An Empirical Case

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Drake Kirkham; Amy Powell; Lucas Rich

    2011-02-01

    Highly Integrated Quality Assurance – An Empirical Case Drake Kirkham1, Amy Powell2, Lucas Rich3 1Quality Manager, Radioisotope Power Systems (RPS) Program, Idaho National Laboratory, P.O. Box 1625 M/S 6122, Idaho Falls, ID 83415-6122 2Quality Engineer, RPS Program, Idaho National Laboratory 3Quality Engineer, RPS Program, Idaho National Laboratory Contact: Voice: (208) 533-7550 Email: Drake.Kirkham@inl.gov Abstract. The Radioisotope Power Systems Program of the Idaho National Laboratory makes an empirical case for a highly integrated Quality Assurance function pertaining to the preparation, assembly, testing, storage and transportation of 238Pu fueled radioisotope thermoelectric generators. Case data represents multiple campaigns including the Pluto/New Horizons mission,more » the Mars Science Laboratory mission in progress, and other related projects. Traditional Quality Assurance models would attempt to reduce cost by minimizing the role of dedicated Quality Assurance personnel in favor of either functional tasking or peer-based implementations. Highly integrated Quality Assurance adds value by placing trained quality inspectors on the production floor side-by-side with nuclear facility operators to enhance team dynamics, reduce inspection wait time, and provide for immediate, independent feedback. Value is also added by maintaining dedicated Quality Engineers to provide for rapid identification and resolution of corrective action, enhanced and expedited supply chain interfaces, improved bonded storage capabilities, and technical resources for requirements management including data package development and Certificates of Inspection. A broad examination of cost-benefit indicates highly integrated Quality Assurance can reduce cost through the mitigation of risk and reducing administrative burden thereby allowing engineers to be engineers, nuclear operators to be nuclear operators, and the cross-functional team to operate more efficiently. Applicability of this case extends to any high-value, long-term project where traceability and accountability are determining factors.« less

  12. Using a Quality-Led Multimedia Approach for Interpersonal Communication Training

    ERIC Educational Resources Information Center

    Labour, Michel; Leleu-Merviel, Sylvie; Vieville, Nicholas

    2004-01-01

    Faced with a fast changing society, the need to develop quality instructional materials to update professional skills has become a growing necessity. This article shows how certain instructional design techniques, such as the "Scenistic" approach and the SNOW analysis, can ensure the educational and the broad technical quality of interactive…

  13. Total Quality: An Understanding and Application For Community, Junior, and Technical Colleges.

    ERIC Educational Resources Information Center

    Burgdorf, Augustus

    1992-01-01

    Total Quality (TQ), is a customer-oriented philosophy of management that utilizes total employee involvement in the relentless, daily search for improvement of product and service quality, through the use of statistical methods, employee teams, and performance management. In the TQ framework, "internal" customers are individuals within the…

  14. Wheat Quality Council, Hard Spring Wheat Technical Committee, 2015 Crop

    USDA-ARS?s Scientific Manuscript database

    Nine experimental lines of hard spring wheat were grown at up to five locations in 2015 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Sprin...

  15. Wheat Quality Council, Hard Spring Wheat Technical Committee, 2017 Crop

    USDA-ARS?s Scientific Manuscript database

    Nine experimental lines of hard spring wheat were grown at up to six locations in 2017 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Spring...

  16. Wheat Quality Council, Hard Spring Wheat Technical Committee, 2014 Crop

    USDA-ARS?s Scientific Manuscript database

    Eleven experimental lines of hard spring wheat were grown at up to five locations in 2014 and evaluated for kernel, milling, and bread baking quality against the check variety Glenn. Wheat samples were submitted through the Wheat Quality Council and processed and milled at the USDA-ARS Hard Red Spr...

  17. 78 FR 12063 - Meeting for Software Developers on the Technical Specifications for Common Formats for Patient...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-02-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Agency for Healthcare Research and Quality Meeting for... and Event Reporting AGENCY: Agency for Healthcare Research and Quality (AHRQ), HHS. ACTION: Notice of... held at the John M. Eisenberg Conference Center, Agency for Healthcare Research and Quality, 540...

  18. Artificial Intelligence Approach to Support Statistical Quality Control Teaching

    ERIC Educational Resources Information Center

    Reis, Marcelo Menezes; Paladini, Edson Pacheco; Khator, Suresh; Sommer, Willy Arno

    2006-01-01

    Statistical quality control--SQC (consisting of Statistical Process Control, Process Capability Studies, Acceptance Sampling and Design of Experiments) is a very important tool to obtain, maintain and improve the Quality level of goods and services produced by an organization. Despite its importance, and the fact that it is taught in technical and…

  19. 78 FR 41075 - Federal Housing Administration (FHA): Single Family Quality Assurance-Solicitation of Information...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-09

    ... the efficiency and effectiveness of FHA's quality assurance process (QAP). The objective of FHA's QAP... control plan (QCP).\\1\\ A copy of the plan must be submitted by the lender when applying for FHA lender... processes: post-endorsement technical reviews, Quality Assurance Division reviews and targeted lender...

  20. An Evaluation of the Technical Adequacy of a Revised Measure of Quality Indicators of Transition

    ERIC Educational Resources Information Center

    Morningstar, Mary E.; Lee, Hyunjoo; Lattin, Dana L.; Murray, Angela K.

    2016-01-01

    This study confirmed the reliability and validity of the Quality Indicators of Exemplary Transition Programs Needs Assessment-2 (QI-2). Quality transition program indicators were identified through a systematic synthesis of transition research, policies, and program evaluation measures. To verify reliability and validity of the QI-2, we…

Top