F-Area Acid/Caustic Basin groundwater monitoring report: Third quarter 1994
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1994-12-01
During third quarter 1994, samples from the FAC monitoring wells at the F-Area Acid/Caustic Basin were collected and analyzed for herbicides/pesticides, indicator parameters, metals, nitrate, radionuclide indicators, volatile organic compounds, and other constituents. Piezometer FAC 5P and monitoring well FAC 6 were dry and could not be sampled. New monitoring wells FAC 9C, 10C, 11C, and 12C were sampled for the first time during third quarter. Analytical results that exceeded final Primary Drinking Water Standards (PDWS), other Savannah River Site (SRS) Flag 2 criteria, or the SRS turbidity standard of 50 NTU during the quarter were as follows: gross alphamore » exceeded the final PDWS and aluminum, iron, manganese, and total alpha-emitting radium exceeded the SRS Flag 2 criteria in one or more of the FAC wells. Turbidity exceeded the SRS standard in wells FAC 3 and 10C. Groundwater flow direction and rate in the water table beneath the F-Area Acid/Caustic Basin were similar to past quarters.« less
F-Area Acid/Caustic Basin groundwater monitoring report. First quarter 1995
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1995-06-01
During first quarter 1995, samples from the FAC monitoring wells at the F-Area Acid/Caustic Basin were collected and analyzed for herbicides/pesticides, indicator parameters, metals, nitrate, radionuclide indicators, volatile organic compounds, and other constituents. Piezometer FAC 5P and monitoring well FAC 6 were dry and could not be sampled. New monitoring wells FAC 9C, 10C, 11C, and 12C were completed in the Barnwell/McBean aquifer and were sampled for the first time during third quarter 1994 (first quarter 1995 is the third of four quarters of data required to support the closure of the basin). Analytical results that exceeded final Primary Drinkingmore » Water Standards (PDWS), other Savannah River Site (SRS) Flag 2 criteria, or the SRS turbidity standard of 50 NTU during the quarter were as follows: gross alpha exceeded the final PDWS and aluminum, iron, manganese, and total alpha-emitting radium exceeded the SRS Flag 2 criteria in one or more of the FAC wells. Turbidity exceeded the SRS standard (50 NTU) in wells FAC 3 and 11C. Groundwater flow direction and rate in the water table beneath the F-Area Acid/Caustic Basin were similar to past quarters.« less
F-Area Acid/Caustic Basin groundwater monitoring report. Second quarter 1995
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1995-09-01
During second quarter 1995, samples from the FAC monitoring wells at the F-Area Acid/Caustic Basin were collected and analyzed for herbicides/pesticides, indicator parameters, metals, nitrate, radionuclide indicators, volatile organic compounds, and other constituents. Piezometer FAC 5P and monitoring well FAC 6 were dry and could not be sampled. New monitoring wells FAC 9C, 10C, 11C, and 12C were completed in the Barnwell/McBean aquifer and were sampled for the first time during third quarter 1994 (second quarter 1995 is the fourth of four quarters of data required to support the closure of the basin). Analytical results that exceeded final Primary Drinkingmore » Water Standards (PDWS) or Savannah River Site (SRS) Flag 2 criteria such as the SRS turbidity standard of 50 NTU during the quarter were as follows: gross alpha exceeded the final PDWS and aluminum, iron, manganese, and radium-226 exceeded the SRS Flag 2 criteria in one or more of the FAC wells. Turbidity exceeded the SRS standard (50 NTU) in well FAC 3. Groundwater flow direction in the water table beneath the F-Area Acid/Caustic Basin was to the west at a rate of 1300 feet per year. Groundwater flow in the Barnwell/McBean was to the northeast at a rate of 50 feet per year.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Thompson, C.Y.
During second quarter 1992, samples from the six FAC monitoring wells at the F-Area Acid/Caustic Basin were analyzed for herbicides, indicator parameters, major ions, pesticides, radionuclides, turbidity, volatile organic compounds, and other constituents. Monitoring results that exceeded the US Environmental Protection Agency`s Primary Drinking Water Standards (PDWS) or the Savannah River Site flagging criteria or turbidity standards during the quarter are the focus of this report.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Thompson, C.Y.
During second quarter 1992, samples from the six FAC monitoring wells at the F-Area Acid/Caustic Basin were analyzed for herbicides, indicator parameters, major ions, pesticides, radionuclides, turbidity, volatile organic compounds, and other constituents. Monitoring results that exceeded the US Environmental Protection Agency's Primary Drinking Water Standards (PDWS) or the Savannah River Site flagging criteria or turbidity standards during the quarter are the focus of this report.
Locations with High Reliance on Private Wells: Not Always Where You Think They Are
For developing contaminant management strategies and protecting drinking water supplies, the locations of areas with reliance on private domestic wells (PDWs) and their relationship to contaminant sources need to be determined. From 1960 to 1990, a key resource in determining are...
Oil and gas extraction and coal-fired electrical power generating stations produce wastewaters that are treated and discharged to rivers in Western Pennsylvania with public drinking water system (PDWS) intakes. Inductively coupled plasma optical emission spectroscopy (ICP-OES) w...
Pancras, Joseph Patrick; Norris, Gary A; Landis, Matthew S; Kovalcik, Kasey D; McGee, John K; Kamal, Ali S
2015-10-01
Oil and gas extraction and coal-fired electrical power generating stations produce wastewaters that are treated and discharged to rivers in Western Pennsylvania with public drinking water system (PDWS) intakes. Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used to quantify inorganic species in wastewater and river samples using a method based on EPA Method 200.7 rev4.4. A total of 53 emission lines from 30 elements (Al, As, B, Ba, Ca, Cd, Ce, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, P, Pb, S, Sb, Se, Si, Sn, Sr, Ti, Tl, V, and Zn) were investigated. Samples were prepared by microwave-assisted acid digestion using a mixture of 2% HNO3 and 0.5% HCl. Lower interferences and better detection characteristics resulted in selection of alternative wavelengths for Al, As, Sb, Mg, Mo, and Na. Radial view measurements offered accurate determinations of Al, Ba, K, Li, Na, and Sr in high-brine samples. Spike recovery studies and analyses of reference materials showed 80-105% recoveries for most analytes. This method was used to quantify species in samples with high to low brine concentrations with method detection limits a factor of 2 below the maximum contaminant limit concentrations of national drinking water standards. Elements B, Ca, K, Li, Mg, Na, and Sr were identified as potential tracers for the sources impacting PDWS intakes. Usability of the ICP-OES derived data for factor analytic model applications was also demonstrated. Published by Elsevier B.V.
H-Area Seepage Basins groundwater monitoring report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1993-03-01
During fourth quarter 1992, the groundwater at the H-Area Seepage Basins (HASB) was monitored in compliance with South Carolina Hazardous Waste Management Regulations, R61-79.265, Subpart F. Samples were collected from 130 wells that monitor the three separate hydrostratigraphic units that make up the uppermost aquifer beneath the HASB. A detailed description of the uppermost aquifer is included in the Resource Conservation and Recovery Act Part B Post-Closure Care Permit Application for the H-Area Hazardous Waste Management Facility submitted to the South Carolina Department of Health and Environmental Control in December 1990. Historically, as well as currently, tritium, nitrate, total alpha-emittingmore » radium, gross alpha, and mercury have been the primary constituents observed above final Primary Drinking Water Standards (PDWS) in groundwater at the HASB. Isoconcentration/isoactivity maps included in this report indicate both the concentration/activity and extent of the primary contaminants in each of the three hydrostratigraphic units during first and fourth quarter 1992. Water-level maps indicate that the groundwater flow rates and directions at the HASB have remained relatively constant since the basins ceased to be active in 1988.« less
H-Area Seepage Basins groundwater monitoring report. Fourth quarter 1992 and 1992 summary
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1993-03-01
During fourth quarter 1992, the groundwater at the H-Area Seepage Basins (HASB) was monitored in compliance with South Carolina Hazardous Waste Management Regulations, R61-79.265, Subpart F. Samples were collected from 130 wells that monitor the three separate hydrostratigraphic units that make up the uppermost aquifer beneath the HASB. A detailed description of the uppermost aquifer is included in the Resource Conservation and Recovery Act Part B Post-Closure Care Permit Application for the H-Area Hazardous Waste Management Facility submitted to the South Carolina Department of Health and Environmental Control in December 1990. Historically, as well as currently, tritium, nitrate, total alpha-emittingmore » radium, gross alpha, and mercury have been the primary constituents observed above final Primary Drinking Water Standards (PDWS) in groundwater at the HASB. Isoconcentration/isoactivity maps included in this report indicate both the concentration/activity and extent of the primary contaminants in each of the three hydrostratigraphic units during first and fourth quarter 1992. Water-level maps indicate that the groundwater flow rates and directions at the HASB have remained relatively constant since the basins ceased to be active in 1988.« less
Lighting up superconducting stripes
NASA Astrophysics Data System (ADS)
Ergeçen, Emre; Gedik, Nuh
2018-02-01
Cuprate superconductors display a plethora of complex phases as a function of temperature and carrier concentration, the understanding of which could provide clues into the mechanism of superconductivity. For example, when about one-eighth of the conduction electrons are removed from the copper oxygen planes in cuprates such as La2‑xBaxCuO4 (LBCO), the doped holes (missing electrons) organize into one-dimensional stripes (1). The bulk superconducting transition temperature (Tc) is greatly reduced, and just above Tc, electrical transport perpendicular to the planes (along the c axis) becomes resistive, but parallel to the copper oxygen planes, resistivity remains zero for a range of temperatures (2). It was proposed a decade ago (3) that this anisotropic behavior is caused by pair density waves (PDWs); superconducting Cooper pairs exist along the stripes within the planes but cannot tunnel to the adjacent layers. On page 575 of this issue, Rajasekaran et al. (4) now report detection of this state in LBCO using nonlinear reflection of high-intensity terahertz (THz) light.
Tracer Transport Along a Vertical Fault Located in Welded Tuffs
NASA Astrophysics Data System (ADS)
Salve, R.; Liu, H.; Hu, Q.
2002-12-01
A near-vertical fault that intercepts the fractured welled tuff formation in the underground Exploratory Studies Facility (ESF) at Yucca Mountain, Nevada, has provided a unique opportunity to evaluate important hydrological parameters associated with faults (e.g., flow velocity, matrix diffusion, fault-fracture-matrix interactions). Alcove 8, which intersects the fault is located in the cross drift of the ESF, has been excavated for liquid releases through this fault and a network of fractures. Located 25 m below Alcove 8 in the main drift of the ESF, Niche 3 which also intercepts the fault, serves as the site for monitoring the wetting front and for collecting seepage following liquid releases in Alcove 8. To investigate the importance of matrix diffusion and the extent of area subject to fracture-matrix interactions, we released a mix of conservative tracers (pentafluorobenzoic acid [PFBA] and lithium bromide [LiBr]) along the fault. The ceiling of Niche 3 was blanketed with an array of trays to capture seepage, and seepage rates were continuously monitored by a water collection system connected to the trays. Additionally, a water sampling device, the passive-discreet water sampler (PDWS), was connected to three of the collections trays in Niche 3 into which water was seeping. The PDWS, designed to isolate continuous seepage from each tray into discreet samples for chemical analysis, remained connected to the trays over a period of three months. During this time, all water that seeped into the three trays was captured sequentially into sampling bottles and analyzed for concentrations of PFBA and LiBr. Water released along the fault initially traveled the 25 m vertical distance over a period of 36 days (at a velocity ~0.7 m/day). The seepage recovered in Niche 3 was less than 10% of the injected water with significant spatial and temporal fluctuations in seepage rates. Along a fast flow path, the benzoic tracer (PFBA) and LiBr were first detected ~12 days after they were released into the fault. Along slower flow paths the tracers appeared ~ two weeks later, with PFBA preceding the LiB. The differing travel times of the two conservative tracers suggests the impact of matrix diffusion in the transport process. This work was supported by the Director, Office of Civilian Radioactive Waste Management, U.S. Department of Energy, through Memorandum Purchase Order EA9013MC5X between Bechtel SAIC Company, LLC, and the Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab). The support is provided to Berkeley Lab through the U.S. Department of Energy Contract No. DE-AC03-76SF00098.
Assurance Penalty Level Analysis Final Rule TSD
This Technical Support Document (TSD) supports EPA’s determination that the final Transport Rule’s assurance provision penalty requirement provides sufficient deterrence against a state exceeding its assurance level.
46 CFR 172.245 - Survival conditions.
Code of Federal Regulations, 2011 CFR
2011-10-01
... stage of flooding: (a) Final waterline. The final waterline, in the final condition of sinkage, heel... nonopening type; (7) Retractable inflatable seal; or (8) Guillotine door. (b) Heel angle. The maximum angle of heel must not exceed 15 degrees, except that this angle may be increased to 17 degrees if no deck...
46 CFR 172.245 - Survival conditions.
Code of Federal Regulations, 2010 CFR
2010-10-01
... stage of flooding: (a) Final waterline. The final waterline, in the final condition of sinkage, heel... nonopening type; (7) Retractable inflatable seal; or (8) Guillotine door. (b) Heel angle. The maximum angle of heel must not exceed 15 degrees, except that this angle may be increased to 17 degrees if no deck...
The EPA document, Relationships Among Exceedances of Chemical Criteria or Guidelines, the Results of Ambient Toxicity Tests, and Community Metrics in Aquatic Ecosystems, presents two studies where the three general approaches for the ecological assessment of contaminant ex...
21 CFR 172.133 - Dimethyl dicarbonate.
Code of Federal Regulations, 2011 CFR
2011-04-01
... additive is used or intended for use as a microbial control agent in the following beverages under normal circumstances of bottling, canning, or other forms of final packaging, where the viable microbial load has been... juice, fruit flavor, or both, with juice content not to exceed 50 percent, in an amount not to exceed...
30 CFR 75.386 - Final mining of pillars.
Code of Federal Regulations, 2010 CFR
2010-07-01
... one mine opening is available due to final mining of pillars, no more than 20 miners at a time shall be allowed in the mine, and the distance between the mine opening and working face shall not exceed...
21 CFR 640.82 - Tests on final product.
Code of Federal Regulations, 2012 CFR
2012-04-01
... percent; 5.0 ±0.30 percent; 20.0 ±1.2 percent; and 25.0 ±1.5 percent solution of protein. (b) Protein... solution of the final product diluted to a concentration of 1 percent protein with 0.15 molar sodium... exceed 2 milliequivalents per liter. (f) Heat stability. A final container sample of Albumin (Human...
21 CFR 640.82 - Tests on final product.
Code of Federal Regulations, 2013 CFR
2013-04-01
... percent; 5.0 ±0.30 percent; 20.0 ±1.2 percent; and 25.0 ±1.5 percent solution of protein. (b) Protein... solution of the final product diluted to a concentration of 1 percent protein with 0.15 molar sodium... exceed 2 milliequivalents per liter. (f) Heat stability. A final container sample of Albumin (Human...
21 CFR 640.82 - Tests on final product.
Code of Federal Regulations, 2014 CFR
2014-04-01
... percent; 5.0 ±0.30 percent; 20.0 ±1.2 percent; and 25.0 ±1.5 percent solution of protein. (b) Protein... solution of the final product diluted to a concentration of 1 percent protein with 0.15 molar sodium... exceed 2 milliequivalents per liter. (f) Heat stability. A final container sample of Albumin (Human...
49 CFR 529.6 - Requirements for final-stage manufacturers.
Code of Federal Regulations, 2011 CFR
2011-10-01
... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...
49 CFR 529.6 - Requirements for final-stage manufacturers.
Code of Federal Regulations, 2013 CFR
2013-10-01
... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...
49 CFR 529.6 - Requirements for final-stage manufacturers.
Code of Federal Regulations, 2010 CFR
2010-10-01
... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...
49 CFR 529.6 - Requirements for final-stage manufacturers.
Code of Federal Regulations, 2012 CFR
2012-10-01
... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...
49 CFR 529.6 - Requirements for final-stage manufacturers.
Code of Federal Regulations, 2014 CFR
2014-10-01
... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MANUFACTURERS OF MULTISTAGE AUTOMOBILES § 529... section, each final-stage manufacturer whose manufacturing operations on an incomplete automobile cause the completed automobile to exceed the maximum curb weight or maximum frontal area set forth in the...
34 CFR 685.202 - Charges for which Direct Loan Program borrowers are responsible.
Code of Federal Regulations, 2010 CFR
2010-07-01
... held prior to that June 1 plus 3.1 percentage points, but does not exceed 8.25 percent. (ii) Loans... plus 2.5 percentage points, but does not exceed 8.25 percent. (B) During all other periods. The...-day Treasury bills auctioned at the final auction held prior to that June 1 plus 3.1 percentage points...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-04
... landings from 2010 and 2011 exceeded the recreational annual catch limit (ACL) for golden tilefish. To... mitigate overages of the ACL if they occur. The final rule for Amendment 17B established ACLs for eight... implemented if these ACLs are reached or exceeded (75 FR 82280, December 30, 2010). The recreational ACL for...
15 CFR 2301.24 - Final Federal payment.
Code of Federal Regulations, 2010 CFR
2010-01-01
... reasonable costs incurred in completing the planning or construction project are less than the total project..., however, the actual costs incurred in completing the project are more than the estimated total project costs, in no case will the final Federal funds paid exceed the grant award. ...
DOE Office of Scientific and Technical Information (OSTI.GOV)
STEEN, F.H.
This document is the format IV, final report for the tank 241-S-111 (S-111) grab samples taken in August 1999 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank S-111 samples were performed as directed in Compatibility Grab Sampling and Analysis Plan for Fiscal Year 1999 (Sasaki 1999a,b). Any deviations from the instructions provided in the tank sampling and analysis plan (TSAP) were discussed in this narrative. The notification limit for {sup 137}Cs was exceeded on two samples. Results are discussed in Section 5.3.2. No other notification limits were exceeded.
5 CFR 1201.126 - Final decisions.
Code of Federal Regulations, 2010 CFR
2010-01-01
... PROCEDURES Procedures for Original Jurisdiction Cases Special Counsel Disciplinary Actions § 1201.126 Final decisions. (a) In any action to discipline an employee, except as provided in paragraphs (b) or (c) of this... civil penalty not to exceed $1,100. 5 U.S.C. 1215(a)(3). (b) In any action in which the administrative...
46 CFR 172.195 - Survival conditions.
Code of Federal Regulations, 2011 CFR
2011-10-01
.... The final waterline, in the final condition of sinkage, heel, and trim, must be below the lower edge...) Heel angle. The maximum angle of heel must not exceed 30 degrees. (c) Range of stability. Through an... lines may not be considered for reducing the angle of heel. Spaces joined by ducts of large cross...
46 CFR 172.195 - Survival conditions.
Code of Federal Regulations, 2010 CFR
2010-10-01
.... The final waterline, in the final condition of sinkage, heel, and trim, must be below the lower edge...) Heel angle. The maximum angle of heel must not exceed 30 degrees. (c) Range of stability. Through an... lines may not be considered for reducing the angle of heel. Spaces joined by ducts of large cross...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-18
...: 84.326Z.] Final Waiver and Extension of the Project Period for the Technical Assistance Coordination... project period. SUMMARY: The Secretary waives the requirements in the Education Department General Administrative Regulations that generally prohibit project periods exceeding five years and extensions of project...
46 CFR 174.320 - Damage survival.
Code of Federal Regulations, 2010 CFR
2010-10-01
... angle of heel in each stage of flooding must not exceed 30 degrees or the angle of downflooding whichever is less. (b) The final waterline, taking into account sinkage, heel, and trim, must be below the...
46 CFR 174.320 - Damage survival.
Code of Federal Regulations, 2011 CFR
2011-10-01
... angle of heel in each stage of flooding must not exceed 30 degrees or the angle of downflooding whichever is less. (b) The final waterline, taking into account sinkage, heel, and trim, must be below the...
33 CFR 157.21 - Subdivision and stability.
Code of Federal Regulations, 2011 CFR
2011-07-01
... account sinkage, heel, and trim, must be below the lower edge of an opening through which progressive.... (b) In the final stage of flooding, the angle of heel due to unsymmetrical flooding must not exceed...
33 CFR 157.21 - Subdivision and stability.
Code of Federal Regulations, 2010 CFR
2010-07-01
... account sinkage, heel, and trim, must be below the lower edge of an opening through which progressive.... (b) In the final stage of flooding, the angle of heel due to unsymmetrical flooding must not exceed...
Statewide GIS mapping of recurring congestion corridors : final report.
DOT National Transportation Integrated Search
2009-07-01
Recurring congestion occurs when travel demand reaches or exceeds the available roadway : capacity. This project developed an interactive geographic information system (GIS) map of the : recurring congestion corridors (labeled herein as hotspots) in ...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-27
... Specialized Mobile Radio Licensees AGENCY: Federal Communications Commission. ACTION: Final rule; announcement... Specialized Mobile Radio (SMR) licensees to exceed a legacy channel spacing requirement and bandwidth...
Kessler, Erich W.; Lorenz, David L.; Sanocki, Christopher A.
2013-01-01
Peak-flow frequency analyses were completed for 409 streamgages in and bordering Minnesota having at least 10 systematic peak flows through water year 2011. Selected annual exceedance probabilities were determined by fitting a log-Pearson type III probability distribution to the recorded annual peak flows. A detailed explanation of the methods that were used to determine the annual exceedance probabilities, the historical period, acceptable low outliers, and analysis method for each streamgage are presented. The final results of the analyses are presented.
75 FR 49947 - Notice of Lodging of Proposed Consent Decree Under the Clean Air Act
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-16
... Decree, Premix is required to operate an emission control system (``ECS'') that meets and exceeds... based upon the demonstrated performance of the ECS. Finally, the proposed settlement will also require...
Development of Non-Proprietary Ultra-High Performance Concrete : Final Report
DOT National Transportation Integrated Search
2017-12-01
Ultra-high performance concrete (UHPC) has mechanical and durability properties that far exceed those of conventional concrete. Particularly, UHPC has compressive and post-cracking tensile strengths of around 20 ksi and 0.72 ksi, respectively. Thus, ...
Zimmerman, Tammy M.
2006-01-01
The Lake Erie shoreline in Pennsylvania spans nearly 40 miles and is a valuable recreational resource for Erie County. Nearly 7 miles of the Lake Erie shoreline lies within Presque Isle State Park in Erie, Pa. Concentrations of Escherichia coli (E. coli) bacteria at permitted Presque Isle beaches occasionally exceed the single-sample bathing-water standard, resulting in unsafe swimming conditions and closure of the beaches. E. coli concentrations and other water-quality and environmental data collected at Presque Isle Beach 2 during the 2004 and 2005 recreational seasons were used to develop models using tobit regression analyses to predict E. coli concentrations. All variables statistically related to E. coli concentrations were included in the initial regression analyses, and after several iterations, only those explanatory variables that made the models significantly better at predicting E. coli concentrations were included in the final models. Regression models were developed using data from 2004, 2005, and the combined 2-year dataset. Variables in the 2004 model and the combined 2004-2005 model were log10 turbidity, rain weight, wave height (calculated), and wind direction. Variables in the 2005 model were log10 turbidity and wind direction. Explanatory variables not included in the final models were water temperature, streamflow, wind speed, and current speed; model results indicated these variables did not meet significance criteria at the 95-percent confidence level (probabilities were greater than 0.05). The predicted E. coli concentrations produced by the models were used to develop probabilities that concentrations would exceed the single-sample bathing-water standard for E. coli of 235 colonies per 100 milliliters. Analysis of the exceedence probabilities helped determine a threshold probability for each model, chosen such that the correct number of exceedences and nonexceedences was maximized and the number of false positives and false negatives was minimized. Future samples with computed exceedence probabilities higher than the selected threshold probability, as determined by the model, will likely exceed the E. coli standard and a beach advisory or closing may need to be issued; computed exceedence probabilities lower than the threshold probability will likely indicate the standard will not be exceeded. Additional data collected each year can be used to test and possibly improve the model. This study will aid beach managers in more rapidly determining when waters are not safe for recreational use and, subsequently, when to issue beach advisories or closings.
Development of Non-Proprietary Ultra High Performance Concrete : Final Presentation : November, 2017
DOT National Transportation Integrated Search
2017-11-01
Ultra-high performance concrete (UHPC) has mechanical and durability properties that far exceed those of conventional concrete. Particularly, UHPC has compressive and post-cracking tensile strengths of around 20 ksi and 0.72 ksi, respectively. Thus, ...
NASA Astrophysics Data System (ADS)
Kotsakis, A.; Choi, Y.; Souri, A.; Jeon, W.; Flynn, J. H., III
2017-12-01
From the years 2000 to 2014, Dallas-Fort Worth (DFW) has seen a decrease in ozone exceedances due to decreased emissions of ozone precursors. In this study, a wind pattern analysis was done to gain a better understanding of the meteorological patterns that have historically contributed to ozone exceedances over the DFW area. Long-term trends in ozone and the seasonal distribution of ozone exceedances were analyzed using surface monitoring data. Using a clustering algorithm called self-organizing maps, characteristic regional wind patterns from 2000-2014 were determined. For each of the wind pattern clusters, the frequency over the last 15 years and average ozone from monitors across DFW was analyzed. Finally, model simulations were performed to determine if pollution transported out of Houston affected incoming background ozone into DFW.
Why Veterinary Medical Educators Should Embrace Cumulative Final Exams.
Royal, Kenneth D
The topic of cumulative final examinations often elicits polarizing opinions from veterinary medical educators. While some faculty prefer cumulative finals, there are many who perceive these types of examinations as problematic. Specifically, faculty often cite cumulative examinations are more likely to cause students' greater stress, which may in turn result in negative student evaluations of teaching. Cumulative finals also restrict the number of items one may present to students on most recent material. While these cited disadvantages may have some merit, the advantages of cumulative examinations far exceed the disadvantages. The purpose of this article is to discuss the advantages of cumulative examinations with respect to learning evidence, grade/score validity, fairness issues, and implications for academic policy.
FORT HALL SOURCE APPORTIONMENT STUDY (FINAL REPORT)
Air quality monitoring on the Fort Hall Indian Reservation has revealed numerous exceedances of the National Ambient Air Quality Standard (NAAQS) for 24-h averaged PM10 mass. Wind-directional analysis coupled with PM10 measurements have identified the FMC elemental phosphorus p...
DOT National Transportation Integrated Search
2010-03-01
Pavements are subjected to different stresses during their design lives. A properly designed pavement will perform adequately during its : design life, and the distresses will not exceed the allowable limits; however, there are several factures that ...
40 CFR 721.537 - Organosilane ester.
Code of Federal Regulations, 2010 CFR
2010-07-01
... the substance beyond the aggregate production volume limit, unless that person conducts this study on.... Scientific valid means that the study was conducted according to: (1) The test guidelines specified in... weeks prior to exceeding the applicable production volume limit. The final report shall contain the...
Code of Federal Regulations, 2013 CFR
2013-07-01
... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.601... means a State law or local building code or similar ordinance, or part thereof, that establishes... designee. Certification of equivalency means a final certification that a code meets or exceeds the minimum...
Code of Federal Regulations, 2012 CFR
2012-07-01
... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.601... means a State law or local building code or similar ordinance, or part thereof, that establishes... designee. Certification of equivalency means a final certification that a code meets or exceeds the minimum...
Code of Federal Regulations, 2014 CFR
2014-07-01
... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Certification of State Laws or Local Building Codes § 36.601... means a State law or local building code or similar ordinance, or part thereof, that establishes... designee. Certification of equivalency means a final certification that a code meets or exceeds the minimum...
Analysis of Coherent Microwave Data Collected on the Ocean Over Two Decades
2011-11-14
code) 14-11-2011 Final Report 1 Dec 2009 to 30 Sep 2011 Final Report: Analysis of Coherent Microwave Data Collected on the Ocean over Two Decades...None The objective of this project was to perform further analysis of data sets that had been collected over the past two decades. To this...and can cause cross sections at HH to exceed those at VV in disagreement with composite surface theory, 3) Shadowing is not a factor in low-grazing
Final Environmental Impact Statement on Debris Removal from Boston Harbor, Massachusetts. Revision.
1980-05-01
34Trace Metal Analysis of Boston Harbor Waters and Sediments", July 1972. Storey , D. A., "The Massachusetts Marina Boatyard Industry 1972-1973", Mass...is possible that a feasible re-use alternative will be identified during the final design stage of the project. If this happens, and the method of re...points. Coliform counts in the Outer Harbor routinely exceed the SB standard designated for that area. 2.27 In summary, the Harbor receives a heavy
Active photonic lattices: is greater than blackbody intensity possible?
Chow, W. W.; Waldmueller, I.
2006-11-10
In this paper, the emission from a radiating source embedded in a photonic lattice is investigated. The photonic lattice spectrum was found to deviate from the blackbody distribution, with intracavity emission suppressed at certain frequencies and significantly enhanced at others. For rapid population relaxation, where the photonic lattice and blackbody populations are described by the same thermal distribution, it was found that the enhancement does not result in output intensities exceeding those of the blackbody. Finally, however, for slow population relaxation, the photonic lattice population has a greater tendency to deviate from thermal equilibrium, resulting in output intensities exceeding thosemore » of the blackbody.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
BELL, K.E.
This document is the format IV, final report for the tank 241-SY-102 (SY-102) grab samples taken in January 2000 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank SY-102 samples were performed as directed in Comparability Grab Sampling and Analysis Plan for Fiscal Year 2000 (Sasaki 1999). No notification limits were exceeded. Preliminary data on samples 2SY-99-5, -6, and -7 were reported in ''Format II Report on Tank 241-SY-102 Waste Compatibility Grab Samples Taken in January 2000'' (Lockrem 2000). The data presented here represent the final results.
Identifying the most hazardous synoptic meteorological conditions for Winter UK PM10 exceedences
NASA Astrophysics Data System (ADS)
Webber, Chris; Dacre, Helen; Collins, Bill; Masato, Giacomo
2016-04-01
Summary We investigate the relationship between synoptic scale meteorological variability and local scale pollution concentrations within the UK. Synoptic conditions representative of atmospheric blocking highlighted significant increases in UK PM10 concentration ([PM10]), with the probability of exceeding harmful [PM10] limits also increased. Once relationships had been diagnosed, The Met Office Unified Model (UM) was used to replicate these relationships, using idealised source regions of PM10. This helped to determine the PM10 source regions most influential throughout UK PM10 exceedance events and to test whether the model was capable of capturing the relationships between UK PM10 and atmospheric blocking. Finally, a time slice simulation for 2050-2060 helped to answer the question whether PM10 exceedance events are more likely to occur within a changing climate. Introduction Atmospheric blocking events are well understood to lead to conditions, conducive to pollution events within the UK. Literature shows that synoptic conditions with the ability to deflect the Northwest Atlantic storm track from the UK, often lead to the highest UK pollution concentrations. Rossby wave breaking (RWB) has been identified as a mechanism, which results in atmospheric blocking and its relationship with UK [PM10] is explored using metrics designed in Masato, et al., 2013. Climate simulations facilitated by the Met Office UM, enable these relationships between RWB and PM10 to be found within the model. Subsequently the frequency of events that lead to hazardous PM10 concentrations ([PM10]) in a future climate, can be determined, within a climate simulation. An understanding of the impact, meteorology has on UK [PM10] within a changing climate, will help inform policy makers, regarding the importance of limiting PM10 emissions, ensuring safe air quality in the future. Methodology and Results Three Blocking metrics were used to subset RWB into four categories. These RWB categories were all shown to increase UK [PM10] and to increase the probability of exceeding a UK [PM10] threshold, when they occurred within constrained regions. Further analysis highlighted that Omega Block events lead to the greatest probability of exceeding hazardous UK [PM10] limits. These events facilitated the advection of European PM10, while also providing stagnant conditions over the UK, facilitating PM10 accumulation. The Met Office UM was used and nudged to ERA-Interim Reanalysis wind and temperature fields, to replicate the relationships found using observed UK [PM10]. Inert tracers were implemented into the model to replicate UK PM10 source regions throughout Europe. The modelled tracers were seen to correlate well with observed [PM10] and Figure 1 highlights the correlations between a RWB metric and observed (a) and modelled (b) [PM10]. A further free running model simulation highlighted the deficiency of the Met Office UM in capturing RWB frequency, with a reduction over the Northwest Atlantic/ European region. A final time slice simulation was undertaken for the period 2050-2060, using Representative Concentration Pathway 8.5, which attempted to determine the change in frequency of UK PM10 exceedance events, due to changing meteorology, in a future climate. Conclusions RWB has been shown to increase UK [PM10] and to lead to greater probabilities of exceeding a harmful [PM10] threshold. Omega block events have been determined the most hazardous RWB subset and this is due to a combination of European advection and UK stagnation. Simulations within the Met Office UM were undertaken and the relationships seen between observed UK [PM10] and RWB were replicated within the model, using inert tracers. Finally, time slice simulations were undertaken, determining the change in frequency of UK [PM10] exceedance events within a changing climate. References Masato, G., Hoskins, B. J., Woolings, T., 2013; Wave-breaking Characteristics of Northern Hemisphere Winter Blocking: A Two-Dimensional Approach. J. Climate, 26, 4535-4549.
21 CFR 173.395 - Trifluoromethane sulfonic acid.
Code of Federal Regulations, 2011 CFR
2011-04-01
... levels not to exceed 0.2 percent of the reaction mixture to catalyze the directed esterification. (c) The esterification reaction is quenched with steam and water and the catalyst is removed with the aqueous phase. Final traces of catalyst are removed by washing batches of the product three times with an aqueous...
21 CFR 173.395 - Trifluoromethane sulfonic acid.
Code of Federal Regulations, 2012 CFR
2012-04-01
... levels not to exceed 0.2 percent of the reaction mixture to catalyze the directed esterification. (c) The esterification reaction is quenched with steam and water and the catalyst is removed with the aqueous phase. Final traces of catalyst are removed by washing batches of the product three times with an aqueous...
21 CFR 173.395 - Trifluoromethane sulfonic acid.
Code of Federal Regulations, 2013 CFR
2013-04-01
... levels not to exceed 0.2 percent of the reaction mixture to catalyze the directed esterification. (c) The esterification reaction is quenched with steam and water and the catalyst is removed with the aqueous phase. Final traces of catalyst are removed by washing batches of the product three times with an aqueous...
7 CFR 226.7 - State agency responsibilities for financial management.
Code of Federal Regulations, 2011 CFR
2011-01-01
... provided does not exceed the product of the total enrollment times operating days times approved meal types... the final report is not submitted within this time limit unless FNS grants an exception. Upward... meal reimbursements estimated to be earned during the budget year. However, the State agency may waive...
7 CFR 226.7 - State agency responsibilities for financial management.
Code of Federal Regulations, 2010 CFR
2010-01-01
... provided does not exceed the product of the total enrollment times operating days times approved meal types... the final report is not submitted within this time limit unless FNS grants an exception. Upward... meal reimbursements estimated to be earned during the budget year. However, the State agency may waive...
77 FR 2497 - Great Lakes Steamship Repower Incentive Program
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-18
... allow the use of residual fuel in the replacement diesel engines that exceeds the global and ECA sulfur... changes, see the direct final rule EPA has published in the ``Rules and Regulations'' section of today's... substantial number of small entities. Small entities include small businesses, small organizations, and small...
48 CFR 252.225-7008 - Restriction on Acquisition of Specialty Metals.
Code of Federal Regulations, 2012 CFR
2012-10-01
... atomization or sputtering of titanium, or final consolidation of non-melt derived titanium powder or titanium alloy powder. (3) Specialty metal means— (i) Steel— (A) With a maximum alloy content exceeding one or..., molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium; (ii) Metal alloys consisting of— (A...
48 CFR 252.225-7008 - Restriction on Acquisition of Specialty Metals.
Code of Federal Regulations, 2010 CFR
2010-10-01
... atomization or sputtering of titanium, or final consolidation of non-melt derived titanium powder or titanium alloy powder. (3) Specialty metal means— (i) Steel— (A) With a maximum alloy content exceeding one or..., molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium; (ii) Metal alloys consisting of— (A...
48 CFR 252.225-7008 - Restriction on Acquisition of Specialty Metals.
Code of Federal Regulations, 2011 CFR
2011-10-01
... atomization or sputtering of titanium, or final consolidation of non-melt derived titanium powder or titanium alloy powder. (3) Specialty metal means— (i) Steel— (A) With a maximum alloy content exceeding one or..., molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium; (ii) Metal alloys consisting of— (A...
40 CFR 423.17 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2014 CFR
2014-07-01
... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...
40 CFR 423.17 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2010 CFR
2010-07-01
... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...
40 CFR 423.17 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2012 CFR
2012-07-01
... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...
40 CFR 423.17 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2011 CFR
2011-07-01
... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...
40 CFR 423.17 - Pretreatment standards for new sources (PSNS).
Code of Federal Regulations, 2013 CFR
2013-07-01
... discharged in chemical metal cleaning wastes shall not exceed the concentration listed in the following table... chemicals added for cooling tower maintenance, except: Chromium, total 0.2 Zinc, total 1.0 (2) At the... engineering calculations which demonstrate that the regulated pollutants are not detectable in the final...
19 CFR 207.30 - Comment on information.
Code of Federal Regulations, 2014 CFR
2014-04-01
... information. (a) In any final phase of an investigation under section 705 or section 735 of the Act, the... day. Comments shall only concern such information, and shall not exceed 15 pages of textual material... Act, and with respect to changes in bracketing of business proprietary information in the comments...
19 CFR 207.30 - Comment on information.
Code of Federal Regulations, 2013 CFR
2013-04-01
... information. (a) In any final phase of an investigation under section 705 or section 735 of the Act, the... day. Comments shall only concern such information, and shall not exceed 15 pages of textual material... Act, and with respect to changes in bracketing of business proprietary information in the comments...
19 CFR 207.30 - Comment on information.
Code of Federal Regulations, 2012 CFR
2012-04-01
... information. (a) In any final phase of an investigation under section 705 or section 735 of the Act, the... day. Comments shall only concern such information, and shall not exceed 15 pages of textual material... Act, and with respect to changes in bracketing of business proprietary information in the comments...
78 FR 25795 - Contractor Legal Management Requirements; Acquisition Regulations
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-03
... DEPARTMENT OF ENERGY 10 CFR Part 719 48 CFR Parts 931, 952, and 970 RIN 1990-AA37 Contractor Legal.... ACTION: Final rule. SUMMARY: The Department of Energy revises existing regulations covering contractor... costs by certain contractors whose contracts exceed $100,000,000 as well as legal counsel retained...
Muth, Mary K; Fahimi, Mansour; Karns, Shawn A
2009-01-01
In the 1996 U.S. Food Safety and Inspection Service's (FSIS) "Pathogen Reduction; Hazard Analysis and Critical Control Point (PR/HACCP) Systems, Final Rule," Salmonella was selected for microbiological testing and monitoring. Using data from an FSIS-sponsored survey of meat and poultry slaughter establishments, inspection results, and other establishment characteristics, potential variables affecting pathogen control, as measured by Salmonella test results, were investigated. The analysis data sets included 153 federally inspected young chicken slaughter establishments, of which 111 exceeded half the Salmonella performance standard at least once from 2003 through 2005, and 121 federally inspected pork slaughter establishments, of which 28 exceeded half the Salmonella performance standard. Logistic regression results for young chicken slaughter establishments indicate they were more likely to exceed half the standard if they had higher inspection noncompliance rates (P = 0.10) and older production space (P = 0.10), and were less likely to exceed it if they used a higher percentage of raw poultry inputs purchased from outside sources (P = 0.10). Results for pork slaughter establishments indicate they were more likely to exceed half the standard if they had a higher rate of voluntary microbiological testing (P = 0.08), and were less likely to exceed it if they were larger (P = 0.08) and used a higher percentage of raw pork inputs purchased from outside sources (P = 0.02). In general, indicators of plant characteristics, food safety practices, and management philosophy are associated with different levels of pathogen control performance that vary by species slaughtered.
Tank 241-AP-103 08/1999 Compatibility Grab Samples and Analytical Results for the Final Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
BELL, K.E.
1999-12-09
This document is the format IV, final report for the tank 241-AP-103 (AP-103) grab samples taken in August 1999 to address waste compatibility concerns. Chemical, radiochemical, and physical analyses on the tank AP-103 samples were performed as directed in ''Compatibility Grub Sampling and Analysis Plan for Fiscal Year 1999'' (Sasaki 1999a). Any deviations from the instructions provided in the tank sampling and analysis plan (TSAP) were discussed in this narrative. No notification limits were exceeded.
Optimal symmetric flight with an intermediate vehicle model
NASA Technical Reports Server (NTRS)
Menon, P. K. A.; Kelley, H. J.; Cliff, E. M.
1983-01-01
Optimal flight in the vertical plane with a vehicle model intermediate in complexity between the point-mass and energy models is studied. Flight-path angle takes on the role of a control variable. Range-open problems feature subarcs of vertical flight and singular subarcs. The class of altitude-speed-range-time optimization problems with fuel expenditure unspecified is investigated and some interesting phenomena uncovered. The maximum-lift-to-drag glide appears as part of the family, final-time-open, with appropriate initial and terminal transient exceeding level-flight drag, some members exhibiting oscillations. Oscillatory paths generally fail the Jacobi test for durations exceeding a period and furnish a minimum only for short-duration problems.
7 CFR 762.124 - Interest rates, terms, charges, and fees.
Code of Federal Regulations, 2013 CFR
2013-01-01
... economic reverses. (2) The final maturity date for each loan cannot exceed 7 years from the date of the... farm, or recover from a disaster or an economical reversal. (2) Loans with balloon installments must... payment comes due based on the expected financial condition of the operation, the depreciated value of the...
7 CFR 762.124 - Interest rates, terms, charges, and fees.
Code of Federal Regulations, 2011 CFR
2011-01-01
... economic reverses. (2) The final maturity date for each loan cannot exceed 7 years from the date of the... farm, or recover from a disaster or an economical reversal. (2) Loans with balloon installments must... payment comes due based on the expected financial condition of the operation, the depreciated value of the...
7 CFR 762.124 - Interest rates, terms, charges, and fees.
Code of Federal Regulations, 2012 CFR
2012-01-01
... economic reverses. (2) The final maturity date for each loan cannot exceed 7 years from the date of the... farm, or recover from a disaster or an economical reversal. (2) Loans with balloon installments must... payment comes due based on the expected financial condition of the operation, the depreciated value of the...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ginley, D. S.
2010-08-01
The purpose of this CRADA was to combine the strengths of NREL and Evergreen Solar in the area of ink jet printing to develop a new manufacturing technology necessary to produce Si solar cells based on ribbon technology comparable to or exceeding current technologies.
19 CFR 207.30 - Comment on information.
Code of Federal Regulations, 2011 CFR
2011-04-01
... information. (a) In any final phase of an investigation under section 705 or section 735 of the Act, the... shall only concern such information, and shall not exceed 15 pages of textual material, double spaced... changes in bracketing of business proprietary information in the comments permitted by § 207.3(c). [61 FR...
10 CFR 72.240 - Conditions for spent fuel storage cask renewal.
Code of Federal Regulations, 2013 CFR
2013-01-01
... to exceed 40 years. In the event that the certificate holder does not apply for a cask design renewal...) The application must be accompanied by a safety analysis report (SAR). The SAR must include the following: (1) Design bases information as documented in the most recently updated final safety analysis...
10 CFR 72.240 - Conditions for spent fuel storage cask renewal.
Code of Federal Regulations, 2012 CFR
2012-01-01
... to exceed 40 years. In the event that the certificate holder does not apply for a cask design renewal...) The application must be accompanied by a safety analysis report (SAR). The SAR must include the following: (1) Design bases information as documented in the most recently updated final safety analysis...
10 CFR 72.240 - Conditions for spent fuel storage cask renewal.
Code of Federal Regulations, 2014 CFR
2014-01-01
... to exceed 40 years. In the event that the certificate holder does not apply for a cask design renewal...) The application must be accompanied by a safety analysis report (SAR). The SAR must include the following: (1) Design bases information as documented in the most recently updated final safety analysis...
Urban soils within the Omaha Lead Superfund Site have been contaminated with lead (Pb) from atmospheric deposition of particulate materials from lead smelting and recycling activities. In May of 2009 the Final Record of Decision stated that any residential soil exceeding the pre...
NASA Astrophysics Data System (ADS)
Konopelko, L. A.; Kustikov, Y. A.; Kolobova, A. V.; Shor, N. B.; Efremova, O. V.; Rozhnov, M. S.; Melnyk, D. M.; Kozia, V. G.; Shpilnyi, S. A.; Petryshyn, P. V.; Iakubov, S. E.; Kluchits, A. S.; Ananyin, V. N.; Mironchik, A. M.; Mokhnach, M. V.; Valkova, M.; Stovcik, V.
2014-01-01
Sulfur dioxide is one of the main contaminants present in the atmosphere due to burning of coal, oil and natural gas, smelting of base metals and production of sulfuric acid. Sulfur dioxide has been the subject of three previous CCQM key comparisons: CCQM-K1.d in 1997, CCQM-K26.b in 2005 and CCQM-K76 in 2010. VNIIM proposed a new COOMET project (No 484/RU/09) in this field, which was registered in the KCDB as key comparison COOMET.QM-K76. It was found that all results were consistent with the reference (gravimetric) values, with observed differences not exceeding ±0.60% and not exceeding either the appropriate assigned expanded uncertainties. VNIIM is the linking laboratory to CCQM-K76. SMU has improved the results obtained in CCQM-K76. The mixtures prepared for this exercise were found to be stable during about one year within the uncertainty of the measurements. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
40 CFR 1068.420 - How do I know when my engine family fails an SEA?
Code of Federal Regulations, 2012 CFR
2012-07-01
... fails an SEA? 1068.420 Section 1068.420 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... PROGRAMS Selective Enforcement Auditing § 1068.420 How do I know when my engine family fails an SEA? (a) A failed engine or piece of equipment is one whose final deteriorated test results exceed an applicable...
39 CFR 310.5 - Payment of postage on violation.
Code of Federal Regulations, 2010 CFR
2010-07-01
... destination. (b) The amount equal to postage will be due and payable not later than 15 days after receipt of... persons who engage in, cause, or assist such activity to pay an amount or amounts not exceeding the total... 959 of this chapter. (c) Refusal to pay an unappealed demand or a demand that becomes final after...
40 CFR 799.9130 - TSCA acute inhalation toxicity.
Code of Federal Regulations, 2010 CFR
2010-07-01
..., final guideline). These sources are available at the address in paragraph (g) of this section. (c... settling velocity as the particle in question, whatever its size, shape, and density. It is used to predict... between groups used in a test should not exceed ±20% of the mean weight of each sex. (C) Number of animals...
40 CFR 799.9130 - TSCA acute inhalation toxicity.
Code of Federal Regulations, 2011 CFR
2011-07-01
..., final guideline). These sources are available at the address in paragraph (g) of this section. (c... settling velocity as the particle in question, whatever its size, shape, and density. It is used to predict... between groups used in a test should not exceed ±20% of the mean weight of each sex. (C) Number of animals...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-24
..., quantity, and timing of flows and from climate change and sea level rise. Resource protection will be... designations, including Wilderness Area, Research Natural Area, Marine Protected Area, Florida Important Bird Area, and Outstanding Florida Water. Annual visitation to the refuge exceeds 700,000. We announce our...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-14
..., sablefish, deep-water flatfish, rex sole, Pacific ocean perch, northern rockfish, shortraker rockfish... cod, shallow-water flatfish, arrowtooth flounder, flathead sole, ``other rockfish'' in the Eastern GOA...) guideline harvest levels (GHLs) for Pacific cod so that the ABC is not exceeded. The shallow-water flatfish...
46 CFR 172.150 - Survival conditions.
Code of Federal Regulations, 2010 CFR
2010-10-01
... waterline, in the final condition of sinkage, heel, and trim, must be below the lower edge of openings such.... (5) Side scuttles of the non-opening type. (b) Heel angle. (1) Except as described in paragraph (b)(2) of this section, the maximum angle of heel must not exceed 15 degrees (17 degrees if no part of the...
46 CFR 172.150 - Survival conditions.
Code of Federal Regulations, 2011 CFR
2011-10-01
... waterline, in the final condition of sinkage, heel, and trim, must be below the lower edge of openings such.... (5) Side scuttles of the non-opening type. (b) Heel angle. (1) Except as described in paragraph (b)(2) of this section, the maximum angle of heel must not exceed 15 degrees (17 degrees if no part of the...
76 FR 64969 - Notice of Final Supplementary Rules Concerning Fireworks on Public Land in Colorado
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-19
.... ADDRESSES: You may send inquiries by mail to the Office of Law Enforcement, BLM Colorado State Office, 2850... above individual. You will receive a reply during normal business hours. SUPPLEMENTARY INFORMATION: I... fountains, total pyrotechnic composition not to exceed 75 grams each for a single tube or, when more than...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-02-05
... heating exceeds the high-stage compressor capacity for cooling. Finally, the test procedure must account... test method to cover Hallowell's three-capacity compressor. The two (of three potential) active stages... pumps for the heating mode as follows: a. Conduct one Maximum Temperature Test (H0 1 ), two High...
75 FR 11224 - VFRC, LLC-Acquisition Exemption-Union Pacific Railroad Company
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-10
... the process of finalizing a Line Sale Contract with UP, pursuant to which UP will: (1) Convey to VFRC... jurisdiction over the involved purchase. If such a motion is filed, it will be addressed in a subsequent Board decision. VFRC certifies that its projected annual revenues as a result of the transaction will not exceed...
Final Report for PV Incubator Subcontract No. NAT-0-99013-01: June 14, 2010 - March 2, 2012
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ghosal, K.
2012-04-01
The goal of the subcontract is to scale up Semprius' novel micro-cell based modules to an annualized rate of 500 kW of receivers and 10 kW of modules, in support of the DOE 2020 Sunshot Initiative goals. The statement of work (SOW) was broken up into two Phases. Phase I was directed towards process development efforts towards addressing fundamental manufacturing metrics such as yield, die per wafer, automation and throughput. Phase II objectives are to scale to an annualized production rate of 500 kW of receivers and 10 kW of modules, while improving cell efficiency, module efficiency and transfer yield.more » Semprius has met all the technical milestones and deliverables for the contract. All subtasks were completed earlier than expected and the results exceeded the technical targets. In particular, 3J cell efficiency of 41.2% exceeded the target of 38%, module efficiency of 28.3% exceeded the target of 28% and transfer yield of 96.4% exceeds the target of 95%, with all tasks completed well ahead of schedule. Also, devices fabricated from 1st use GaAs substrates and substrates with two re-uses have been shown to be identical.« less
1987-12-18
Leases 9 36 1 0 0 Grace Petroleum Leases 10 1 2 3 0 Hunter Resources Lease 3 10 1 2 0 Petroleum Marketing 1 0 294 0 0 0 Petroleum Productioni 117 2,294...of fact, it is Newhall Resources’ intention to actively market its acreage for leasing purposes to other oil companies once the EIS is finalized and...consciously slower pace than existing development procedures might warrant" means that if oil and gas market conditions were such that they exceeded the
37 CFR 2.142 - Time and manner of ex parte appeals.
Code of Federal Regulations, 2014 CFR
2014-07-01
... date of the final refusal or the date of the action from which the appeal is taken. An appeal is taken... Trial and Appeal Board, a brief shall not exceed twenty-five pages in length in its entirety, including... from which the appeal is taken, or in lieu thereof another examiner from the same examining division as...
37 CFR 2.142 - Time and manner of ex parte appeals.
Code of Federal Regulations, 2012 CFR
2012-07-01
... date of the final refusal or the date of the action from which the appeal is taken. An appeal is taken... Trial and Appeal Board, a brief shall not exceed twenty-five pages in length in its entirety, including... from which the appeal is taken, or in lieu thereof another examiner from the same examining division as...
37 CFR 2.142 - Time and manner of ex parte appeals.
Code of Federal Regulations, 2010 CFR
2010-07-01
... date of the final refusal or the date of the action from which the appeal is taken. An appeal is taken... Trial and Appeal Board, a brief shall not exceed twenty-five pages in length in its entirety, including... from which the appeal is taken, or in lieu thereof another examiner from the same examining division as...
37 CFR 2.142 - Time and manner of ex parte appeals.
Code of Federal Regulations, 2011 CFR
2011-07-01
... date of the final refusal or the date of the action from which the appeal is taken. An appeal is taken... Trial and Appeal Board, a brief shall not exceed twenty-five pages in length in its entirety, including... from which the appeal is taken, or in lieu thereof another examiner from the same examining division as...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-29
... as ``flared joint.'' The flared joint, once made fast, permits brake fluid to flow through channels...), or push on ends (PO), or flanged ends and produced to the American Water Works Association (AWWA... flared joint, once made fast, permits brake fluid to flow through channels that never exceed 3.8...
2005-09-06
affected surface water, 3) adversely affected groundwater quantity or quality, or 4) caused a need that exceeded the existing potable supply or...goby is from Tillas Slough (mouth of the Smith River) in Del Norte County, south to Colonel Louis D. Van Mullem, Jr. (1-8-96-F/C-29) 5 Agua Hedionda
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-25
... dead discards. We will adjust the quotas in the final rule based on updated data, including dead... quota, the sum of updated landings data (from late reports) and dead discard estimates would need to reach or exceed 475 mt dw. In 2011, dead discards were estimated to equal 101.5 mt dw and late reports...
W.D. " Dusty" Walter; H.E. " Gene" Garrett; Larry D. Godsey
2004-01-01
When establishing an agroforestry practice, the number of trees planted will often exceed the densities needed to achieve a final spacing or configuration. While tight spacings may facilitate certain growth parameters, such as height development, timely thinnings of plantings are required in order to maintain desirable growth rates. In managed plantations especially,...
40 CFR 85.1503 - General requirements for importation of nonconforming vehicles and engines.
Code of Federal Regulations, 2014 CFR
2014-07-01
... importation into the United States must be imported by an ICI who is a current holder of a valid certificate... (e.g., the current model year), an ICI may finally admit no more than the following numbers of... by the parent company and all its subsidiaries. (e) An ICI may exceed the limits outlined paragraphs...
40 CFR 85.1503 - General requirements for importation of nonconforming vehicles and engines.
Code of Federal Regulations, 2012 CFR
2012-07-01
... importation into the United States must be imported by an ICI who is a current holder of a valid certificate... (e.g., the current model year), an ICI may finally admit no more than the following numbers of... by the parent company and all its subsidiaries. (e) An ICI may exceed the limits outlined paragraphs...
40 CFR 85.1503 - General requirements for importation of nonconforming vehicles and engines.
Code of Federal Regulations, 2011 CFR
2011-07-01
... importation into the United States must be imported by an ICI who is a current holder of a valid certificate... (e.g., the current model year), an ICI may finally admit no more than the following numbers of... by the parent company and all its subsidiaries. (e) An ICI may exceed the limits outlined paragraphs...
40 CFR 85.1503 - General requirements for importation of nonconforming vehicles and engines.
Code of Federal Regulations, 2013 CFR
2013-07-01
... importation into the United States must be imported by an ICI who is a current holder of a valid certificate... (e.g., the current model year), an ICI may finally admit no more than the following numbers of... by the parent company and all its subsidiaries. (e) An ICI may exceed the limits outlined paragraphs...
ERIC Educational Resources Information Center
Texas Consortium of Geriatric Education Centers, Houston.
The goal of the faculty development program that formed the basis of this project was to provide more social workers trained in working effectively with the elderly. Demographics indicate that the number of elderly, including frail elderly, will increase, and the need for social workers in this area already exceeds the available supply. Objectives…
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-04
... catch limit (ACL) overage, and as a result closes the recreational sector. This action is necessary to... overages of the ACL if they occur. On December 30, 2010, NMFS issued a final rule (75 FR 82280) to... if these ACLs are reached or exceeded. The recreational ACL for golden tilefish, implemented through...
Code of Federal Regulations, 2011 CFR
2011-07-01
... coordination with the installation commander concerned, will commence preparation of ENG Form 2187-R, if... excessed are clearly defined, action will be initiated to assemble all necessary data so that the final SF... 10 U.S.C. 2662. (g) When the estimated value of the property does not exceed $100,000 and preparation...
77 FR 54384 - Nonconformance Penalties for On-Highway Heavy-Duty Diesel Engines
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-05
...EPA is taking final action to establish nonconformance penalties (NCPs) for manufacturers of heavy heavy-duty diesel engines (HHDDE) in model years 2012 and later for emissions of oxides of nitrogen (NOX) because we have found the criteria for NCPs and the Clean Air Act have been met. The NOX standards to which these NCPs apply were established by a rule published on January 18, 2001. In general, NCPs allow a manufacturer of heavy-duty engines (HDEs) whose engines do not conform to applicable emission standards, but do not exceed a designated upper limit, to be issued a certificate of conformity upon payment of a monetary penalty to the United States Government. The upper limit associated with these NCPs is 0.50 grams of NOX per brake horsepower-hour (g/bhp-hr). This Final Rule specifies certain parameters that are entered into the preexisting penalty formulas along with the emissions of the engine and the incorporation of other factors to determine the amount a manufacturer must pay. Key parameters that determine the NCP a manufacturer must pay are EPA's estimated cost of compliance for a near worst-case engine and the degree to which the engine exceeds the emission standard (as measured from production engines). EPA proposed NCPs for medium heavy duty diesel engines. However, EPA is not taking final action with regard to NCPs for these engines at this time because EPA has not completed its review of the data and comments regarding these engines.
NASA Astrophysics Data System (ADS)
Konopelko, L. A.; Kustikov, Y. A.; Kolobova, A. V.; Shor, N. B.; Efremova, O. V.; Rozhnov, M. S.; Melnyk, D. M.; Kozia, V. G.; Shpilnyi, S. A.; Petryshyn, P. V.; Iakubov, S. E.; Kluchits, A. S.; Ananyin, V. N.; Mironchik, A. M.; Mokhnach, M. V.; Valkova, M.; Stovcik, V.; Walden, J.; Augusto, C. R.; Fioravante, A. L.; Ribeiro, C. C.; Sobrinho, D. C. G.; Oudwater, R. J.; da Cunha, V. S.
2014-01-01
Nitrogen monoxide is one of the main contaminants present in the atmospheric air due to emissions of vehicles and power stations. Taking into account the positive experience of VNIIM in the pilot study CCQM-P73 (Nitrogen monoxide gas standards, 30 µmol/mol to 70 µmol/mol), a COOMET project (No 483/RU/09) on the subject was decided and registered in the KCDB as supplementary comparison COOMET.QM-S1. This involved six National Metrology Institutes, aiming to consolidate or support their Calibration and Measurement Capabilities in this field. It was found that most of the results were consistent with the reference (gravimetric) values, with observed differences not exceeding ±1.3% and not exceeding either the appropriate assigned expanded uncertainties. There was, however, one exception: the INMETRO difference from the reference value is slightly higher than the expended uncertainty. The mixtures prepared for this exercise were found to be stable during about one year within the uncertainty of the measurements. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by COOMET, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
DOE Office of Scientific and Technical Information (OSTI.GOV)
Crecelius, E.A.; Fortman, T.J.; Kiesser, S.L.
1989-07-01
Concentrations of Cu, Pb, Zn, PAH's, TBT and FC bacteria were measured in surface sediment, sediment-trap, and water-column samples at two marinas in Puget Sound during summer of 1988. Levels of contaminants inside the marinas were compared with levels outside. TBT had greatest elevation in marina sediments compared to reference sediments. Few of sediments exceeded Puget Sound AET sediment quality values but most did exceed PSDDA screening levels for in-water disposal of dredged sediment. All marinas estimated to contribute less than one percent of total mass loading of Cu, Pb and Zn to main basin of Puget Sound. Contribution ofmore » TBT may be much more significant if antifouling paints are the major source for Puget Sound.« less
Investigation of lunar crustal structure and isostasy. Final technical report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Thurber, C.H.
1987-07-01
The lunar mascon basins have strongly free air gravity anomalies, generally exceeding 100 milligals at an elevation of 100 km. The source of the anomalies is a combination of mantle uplift beneath the impact basins and subsequent infilling by high-density mare basalts. The relative contribution of these two components is still somewhat uncertain, although it is generally accepted that the amount of mantle uplift greatly exceeds the thickness of the basalts. Extensive studies have been carried out of the crustal structure of mare basins, based on gravity data, and their tectonic evolution, based on compressive and extensional tectonic features. Themore » present study endeavored to develop a unified, self-consistent model of the lunar crust and lithosphere incorporating both gravity and tectonic constraints.« less
Federal Register 2010, 2011, 2012, 2013, 2014
2010-01-04
...The Nuclear Regulatory Commission (NRC) is amending its regulations to provide alternate fracture toughness requirements for protection against pressurized thermal shock (PTS) events for pressurized water reactor (PWR) pressure vessels. This final rule provides alternate PTS requirements based on updated analysis methods. This action is desirable because the existing requirements are based on unnecessarily conservative probabilistic fracture mechanics analyses. This action reduces regulatory burden for those PWR licensees who expect to exceed the existing requirements before the expiration of their licenses, while maintaining adequate safety, and may choose to comply with the final rule as an alternative to complying with the existing requirements.
NASA Dryden test pilot Michael J. Adams
1967-03-22
Air Force test pilot Maj. Michael J. Adams stands beside X-15 ship number one. Adams was selected for the X-15 program in 1966 and made his first flight on Oct. 6, 1966. On Nov. 15, 1967, Adams made his seventh and final X-15 flight. The X-15 launched from the B-52, but during the ascent an electrical problem affected the X-15's control system. The aircraft crashed northwest of Cuddeback Lake, California, causing the death of Adams. He was posthumously awarded Air Force astronaut wings because his final flight exceeded 50 miles in altitude. Adams was the only pilot lost in the 199-flight X-15 program.
ERIC Educational Resources Information Center
Nuttall, Ronald L.
Variables expected to be associated with academic achievement were examined in a sample (generally exceeding 2500) from eight secondary schools in Baymon Norte, Puerto Rico. Concern was whether variables associated with academic achievement differed by sex or by socioeconomic status (SES). Multivariate analyses of variance with three factors of…
Energy Performance Monitoring and Optimization System for DoD Campuses
2014-02-01
EPMO system exceeded the energy consumption reduction target of 20% and improved occupant thermal comfort by reducing the number of instances outside... thermal comfort constraints, and plant efficiency EW2011-42 Final Report 8 February 2014 in the same framework [30-33]. In this framework, 4-hour...conjunction with information such as: thermal comfort constraints, equipment constraints, energy performance objectives. All the information is
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-12
... TACs for 2010 and 2011 that are equal to ABCs for pollock, deep-water flatfish, rex sole, sablefish... recommended TACs for 2010 and 2011 that are less than the ABCs for Pacific cod, flathead sole, shallow-water... that the sum of all State and Federal water Pacific cod removals from the GOA not exceed ABC...
ROHHAD Syndrome: The Girl who Forgets to Breathe.
Sanklecha, Mukesh; Sundaresan, Suba; Udani, Vrajesh
2016-04-01
ROHHAD syndrome is an exceedingly rare cause of central hypoventilation. A 7-year-old girl with ROHHAD syndrome who had central hypoventilation, rapid weight gain, multiple cardiac arrests and hyperprolactinemia. She required prolonged and repeated ventilation, and finally died due to complications of ventilation. ROHHAD Syndrome should be suspected in any child who presents with obesity, behavioral changes or autonomic instability following a neural crest tumor.
47 CFR 15.219 - Operation in the band 510-1705 kHz.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 47 Telecommunication 1 2014-10-01 2014-10-01 false Operation in the band 510-1705 kHz. 15.219... kHz. (a) The total input power to the final radio frequency stage (exclusive of filament or heater... ground lead (if used) shall not exceed 3 meters. (c) All emissions below 510 kHz or above 1705 kHz shall...
47 CFR 15.219 - Operation in the band 510-1705 kHz.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 47 Telecommunication 1 2012-10-01 2012-10-01 false Operation in the band 510-1705 kHz. 15.219... kHz. (a) The total input power to the final radio frequency stage (exclusive of filament or heater... ground lead (if used) shall not exceed 3 meters. (c) All emissions below 510 kHz or above 1705 kHz shall...
47 CFR 15.219 - Operation in the band 510-1705 kHz.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 1 2010-10-01 2010-10-01 false Operation in the band 510-1705 kHz. 15.219... kHz. (a) The total input power to the final radio frequency stage (exclusive of filament or heater... ground lead (if used) shall not exceed 3 meters. (c) All emissions below 510 kHz or above 1705 kHz shall...
47 CFR 15.219 - Operation in the band 510-1705 kHz.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 47 Telecommunication 1 2011-10-01 2011-10-01 false Operation in the band 510-1705 kHz. 15.219... kHz. (a) The total input power to the final radio frequency stage (exclusive of filament or heater... ground lead (if used) shall not exceed 3 meters. (c) All emissions below 510 kHz or above 1705 kHz shall...
47 CFR 15.219 - Operation in the band 510-1705 kHz.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 47 Telecommunication 1 2013-10-01 2013-10-01 false Operation in the band 510-1705 kHz. 15.219... kHz. (a) The total input power to the final radio frequency stage (exclusive of filament or heater... ground lead (if used) shall not exceed 3 meters. (c) All emissions below 510 kHz or above 1705 kHz shall...
ERIC Educational Resources Information Center
Berki, S. E.
This paper presents high-cost illness data from the first public use data file released on the 1977 National Medical Care Expenditure Survey. Characteristics of families which incurred out-of-pocket expenditures for personal health services that exceeded 5, 10, and 20 percent of their income in 1977 are described including: (1) demographics; (2)…
Grid-Parity Solar Power for Department of Defense Installations
2014-02-01
MW DC. Installed capacity of panels. Capacity of 1 MW DC. Capacity = 998.4 kWp DC. Photovoltaic Peak Capacity ( Power Delivered). PVSyst... Photovoltaic Annual Output ( Power Delivered) The power delivered to Camp Roberts should match or exceed results simulated using the University of Geneva...FINAL REPORT Grid-Parity Solar Power for Department of Defense Installations ESTCP Project EW-201134 FEBRUARY 2014 John Bender
Landis, Matthew S; Kamal, Ali S; Kovalcik, Kasey D; Croghan, Carry; Norris, Gary A; Bergdale, Amy
2016-01-15
In 2010, a dramatic increase in the levels of total trihalomethane (THM) and the relative proportion of brominated species was observed in finished water at several Pennsylvania water utilities (PDW) using the Allegheny River as their raw water supply. An increase in bromide (Br(-)) concentrations in the Allegheny River was implicated to be the cause of the elevated water disinfection byproducts. This study focused on quantifying the contribution of Br(-) from a commercial wastewater treatment facility (CWTF) that solely treats wastes from oil and gas producers and discharges into the upper reaches of the Allegheny River, and impacts on two downstream PDWs. In 2012, automated daily integrated samples were collected on the Allegheny River at six sites during three seasonal two-week sampling campaigns to characterize Br(-) concentrations and river dispersion characteristics during periods of high and low river discharges. The CWTF discharges resulted in significant increases in Br(-) compared to upstream baseline values in PDW raw drinking water intakes during periods of low river discharge. During high river discharge, the assimilative dilution capacity of the river resulted in lower absolute halide concentrations, but significant elevations Br(-) concentrations were still observed at the nearest downstream PDW intake over baseline river levels. On days with active CWTF effluent discharge the magnitude of bromide impact increased by 39 ppb (53%) and 7 ppb (22%) for low and high river discharge campaigns, respectively. Despite a declining trend in Allegheny River Br(-) (2009-2014), significant impacts from CWTF and coal-fired power plant discharges to Br(-) concentrations during the low river discharge regime at downstream PDW intakes was observed, resulting in small modeled increases in total THM (3%), and estimated positive shifts (41-47%) to more toxic brominated THM analogs. The lack of available coincident measurements of THM, precursors, and physical parameters limited the interpretation of historical trends. Published by Elsevier B.V.
Kotsiou, Ourania S; Tzortzi, Panagiota; Beta, Rafailia A A; Kyritsis, Athanasios; Gourgoulianis, Konstantinos I
2018-06-01
A follow-up thoracentesis is proposed in suspected atypical tuberculosis cases. The study aimed to define the variability of pleural ADA values across repeated thoracenteses in different types of pleural effusions (PEs) and to evaluate whether ADA variance, in regard to the cutoff value of 40 U/L, affected final diagnosis. A total of 131 patients with PEs of various etiologies underwent three repeated thoracenteses. ADA values were subsequently estimated. 82% and 55% of patients had greater than 10% and 20% deviation from the highest ADA value, respectively. From those patients who had a variance of 20%, 36% had only increasing ADA values, while 19% had only decreasing values. Considering the cutoff value of 40 U/L, only in two cases, ADA decreased below this threshold, which concerned a man with tuberculous pleurisy and a woman with lymphoma both in the course of treatment. Furthermore, only in two cases with rising values, ADA finally exceeded the cutoff limit, which concerned a man with rheumatoid pleurisy and a man with tuberculous pleurisy. Surprisingly, malignant PEs (MPEs) showed a higher percentage of increasing values compared to all other exudates that did not, however, exceed the threshold. The determination of pleural ADA levels is a reproducible method for rapid tuberculosis diagnosis. The detected measurement deviations do not appear to affect final diagnosis. In specific situations, repeated ADA measurements may be valuable in directing further diagnostic evaluation. More investigation is needed to elucidate the possible prognostic significance of the increasing trend in ADA values in MPEs. © 2017 Wiley Periodicals, Inc.
26 CFR 1.1015-5 - Increased basis for gift tax paid.
Code of Federal Regulations, 2011 CFR
2011-04-01
... market value of $53,000 and a basis in the hands of G of $20,000. G paid gift tax of $5,250 on the..., 1958, and the gift tax paid on the transfer to J did not exceed $43,000 ($63,000, fair market value of... in this paragraph, the values to be used are those finally determined for purposes of the gift tax...
26 CFR 1.1015-5 - Increased basis for gift tax paid.
Code of Federal Regulations, 2014 CFR
2014-04-01
... market value of $53,000 and a basis in the hands of G of $20,000. G paid gift tax of $5,250 on the..., 1958, and the gift tax paid on the transfer to J did not exceed $43,000 ($63,000, fair market value of... in this paragraph, the values to be used are those finally determined for purposes of the gift tax...
26 CFR 1.1015-5 - Increased basis for gift tax paid.
Code of Federal Regulations, 2012 CFR
2012-04-01
... market value of $53,000 and a basis in the hands of G of $20,000. G paid gift tax of $5,250 on the..., 1958, and the gift tax paid on the transfer to J did not exceed $43,000 ($63,000, fair market value of... in this paragraph, the values to be used are those finally determined for purposes of the gift tax...
26 CFR 1.1015-5 - Increased basis for gift tax paid.
Code of Federal Regulations, 2013 CFR
2013-04-01
... market value of $53,000 and a basis in the hands of G of $20,000. G paid gift tax of $5,250 on the..., 1958, and the gift tax paid on the transfer to J did not exceed $43,000 ($63,000, fair market value of... in this paragraph, the values to be used are those finally determined for purposes of the gift tax...
Ultra-fast escape maneuver of an octopus-inspired robot.
Weymouth, G D; Subramaniam, V; Triantafyllou, M S
2015-02-02
We design and test an octopus-inspired flexible hull robot that demonstrates outstanding fast-starting performance. The robot is hyper-inflated with water, and then rapidly deflates to expel the fluid so as to power the escape maneuver. Using this robot we verify for the first time in laboratory testing that rapid size-change can substantially reduce separation in bluff bodies traveling several body lengths, and recover fluid energy which can be employed to improve the propulsive performance. The robot is found to experience speeds over ten body lengths per second, exceeding that of a similarly propelled optimally streamlined rigid rocket. The peak net thrust force on the robot is more than 2.6 times that on an optimal rigid body performing the same maneuver, experimentally demonstrating large energy recovery and enabling acceleration greater than 14 body lengths per second squared. Finally, over 53% of the available energy is converted into payload kinetic energy, a performance that exceeds the estimated energy conversion efficiency of fast-starting fish. The Reynolds number based on final speed and robot length is [Formula: see text]. We use the experimental data to establish a fundamental deflation scaling parameter [Formula: see text] which characterizes the mechanisms of flow control via shape change. Based on this scaling parameter, we find that the fast-starting performance improves with increasing size.
DOE Office of Scientific and Technical Information (OSTI.GOV)
FULLER, R.K.
1999-02-24
This document is the final report for tank 241-AN-101 grab samples. Three grab samples 1AN-98-1, 1AN-98-2 and 1AN-98-3 were taken from riser 16 of tank 241-AN-101 on April 8, 1998 and received by the 222-S Laboratory on April 9, 1998. Analyses were performed in accordance with the ''Compatability Grab Sampling and Analysis Plan'' (TSAP) and the ''Data Quality Objectives for Tank Farms Waste Compatability Program'' (DQO). The analytical results are presented in the data summary report. No notification limits were exceeded.
Perception of the fundamental frequencies of children's voices by trained and untrained listeners.
Wilson, F B; Wellen, C J; Kimbarow, M L
1983-10-01
This study was designed to determine if trained voice clinicians were better than untrained listeners in judging differences in the fundamental frequencies of children's voices. We also attempted to determine the degree of difference in fundamental frequency necessary for accurate judgments. Finally, ability to perceive pitch differences in speaking voices was correlated with ability to judge puretone stimuli. Results indicated that trained clinicians were no better at judging average fundamental frequency than were untrained listeners. Both groups performed at chance level until differences in vocal fundamental frequency exceeded 20 Hz. Finally, there was no correlation between subjects' success on standardized puretone pitch tests and ability to judge average pitch in the speaking voice.
NASA Technical Reports Server (NTRS)
Hodges, G. E.; Mcgehee, C. R.
1981-01-01
The final design and hardware fabrication was completed for an active control system capable of the required flutter suppression, compatible with and ready for installation in the NASA aeroelastic research wing number 1 (ARW-1) on Firebee II drone flight test vehicle. The flutter suppression system uses vertical acceleration at win buttock line 1.930 (76), with fuselage vertical and roll accelerations subtracted out, to drive wing outboard aileron control surfaces through appropriate symmetric and antisymmetric shaping filters. The goal of providing an increase of 20 percent above the unaugmented vehicle flutter velocity but below the maximum operating condition at Mach 0.98 is exceeded by the final flutter suppression system. Results indicate that the flutter suppression system mechanical and electronic components are ready for installation on the DAST ARW-1 wing and BQM-34E/F drone fuselage.
MPT_DOE Final Report 12-15-16 rev1
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bunce, Michael
The goal of this project was to achieve breakthrough thermal efficiency on a light duty passenger car engine, with minimal impact to emissions. The enabling technology or technologies were to be relatively low cost and integrateable into existing production processes. Through the use of Turbulent Jet Ignition (TJI), an enabling technology for ultra-lean engine operation, the project team was able to meet or exceed all technical goals of this program.
SPECTROPHOTOMETRIC DETERMINATION OF TRACES OF BORON IN THORIUM
DOE Office of Scientific and Technical Information (OSTI.GOV)
Onishi, H.; Ishiwatari, N.; Nagai, H.
1960-12-01
A procedure is described for the spectrophotometric determination of a few tenths of a pant per million of boron ia thorium oxide or thorium. The sample is dissolved in strong phosphoric acid. After diluting the solution with water, boron is separated by distillation as methyl borate and finally determined by the curcumin method. The error is not likely to exceed plus or minus O.l ppm for 0.2 to 1 ppm of boron. (auth)
Final Summary Report on Project 3310 Marine Diesel Exhaust Emissions (Alternative Fuels)
1997-09-01
of five types) operating on the West Coast. Of the 14 vessels tested, eight were found to exceed the proposed NOx limits, although some by very small amounts....develop methodology applicable for use on small vessels by using portable emission analyzers, and to examine various potential means of reducing excessive...This report summarizes the results of a 5-year study to ascertain the magnitude of emission problems from Coast Guard and
1999-10-22
la performance technique et environnementale de PAmphibex Journal: Report for Environment Canada-Quebec Region and Environment Quebec Date: Mar 1995...cell. Exceed Set Standards? This demonstration was used to finalize operational and performance standards to be used for the audit of innovative...suspended solids measurements will be performed inside the confined area in order to audit the removal technology. All provisions should be taken to
Hu, Bowen; Yang, Xi; Yang, Huiliang; Liu, Limin; Chen, Peiran; Wang, Linnan; Zhu, Ce; Zhou, Chunguang; Song, Yueming
2018-06-18
Choosing the fusion level for posterior fusion in Lenke 5C adolescent idiopathic scoliosis patients is highly associated with coronal balance. Previous studies indicated that in patients with lowest end vertebra tilt > 25°, surgeons could extend distal fusion to avoid coronal imbalance. This study aimed to assess the risk factors for coronal imbalance in Lenke 5C scoliosis, and to discuss how to select fusion level. We reviewed 59 Lenke 5C AIS patients in one institution with at least 2-years' follow-up from 2010 through 2015. Preoperative, and 3-month and 2-year postoperative follow-up radiographs were measured using a number of specific measurements related to coronal balance. Patients were categorized into an LEV group and an LEV+1 group. Coronal imbalance was found in 6/31 patients in the LEV+1 group at final follow-up , and not in the LEV-group at the first or final follow-up. The C7 plumb line shifted to the convex side of the central sacral vertical line in 47/59 patients, including all of the 19 CIB patients after surgery. Patients who underwent fusion at LEV+1 with > 25° LEV tilt also showed poor results regarding coronal imbalance. Statistically, coronal balance at the final follow-up was correlated with preoperative bending lumbosacral hemi-curve (p=0.002) and all of the 6 patients with CIB had bending lumbosacral hemi-curve exceeds 15°. No significant difference were found in SRS-22 scores between the two groups at 2-year-follow-up. Distal fusion extension at LEV+1 is more likely to result in coronal imbalance at the first and final follow-up, especially when bending lumbosacral hemi-curve exceeds 15°. Fusion at LEV+1 should not be chosen when LEV is at L4. Copyright © 2018. Published by Elsevier Inc.
Yan, Yong; Crisp, Ryan W.; Gu, Jing; ...
2017-04-03
Multiple exciton generation (MEG) in quantum dots (QDs) has the potential to greatly increase the power conversion efficiency in solar cells and in solar-fuel production. During the MEG process, two electron-hole pairs (excitons) are created from the absorption of one high-energy photon, bypassing hot-carrier cooling via phonon emission. Here we demonstrate that extra carriers produced via MEG can be used to drive a chemical reaction with quantum efficiency above 100%. We developed a lead sulfide (PbS) QD photoelectrochemical cell that is able to drive hydrogen evolution from aqueous Na 2S solution with a peak external quantum efficiency exceeding 100%. QDmore » photoelectrodes that were measured all demonstrated MEG when the incident photon energy was larger than 2.7 times the bandgap energy. Finally, our results demonstrate a new direction in exploring high-efficiency approaches to solar fuels.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1989-09-29
The 4-acre Cemetery Dump site is a former sand and gravel pit in Rose Township, Oakland County, Michigan. During the late 1960s or early 1970s, approximately 300 to 600 drums, containing paint sludges, solvents, PCBs, and oils, were illegally dumped and buried onsite. A 1985 Record of Decision (ROD) addressed the soil cleanup which included excavation and offsite disposal of visually-contaminated soil and drum fragments. Soil which was not visually contaminated was sampled and backfilled with clean soil into the excavated areas. Subsequent soil and ground water sampling indicated that zinc contaminants in the ground water exceed the Federal secondarymore » MCL, a nonenforceable standard based on taste and odor, not protection of health. Zinc contamination, however, is most likely a result of monitoring well construction materials. No other contaminants exceed Federal or State environmental standards.« less
NASA Astrophysics Data System (ADS)
Colantonio, Alessandro; di Pietro, Roberto; Ocello, Alberto; Verde, Nino Vincenzo
In this paper we address the problem of generating a candidate role-set for an RBAC configuration that enjoys the following two key features: it minimizes the administration cost; and, it is a stable candidate role-set. To achieve these goals, we implement a three steps methodology: first, we associate a weight to roles; second, we identify and remove the user-permission assignments that cannot belong to a role that have a weight exceeding a given threshold; third, we restrict the problem of finding a candidate role-set for the given system configuration using only the user-permission assignments that have not been removed in the second step—that is, user-permission assignments that belong to roles with a weight exceeding the given threshold. We formally show—proof of our results are rooted in graph theory—that this methodology achieves the intended goals. Finally, we discuss practical applications of our approach to the role mining problem.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hushur, Anwar; Manghnani, Murli H.; Werheit, Helmut
Single-crystal B4.3C boron carbide is investigated concerning the pressure-dependence of optical properties and of Raman-active phonons up to ~70 GPa. The high concentration of structural defects determining the electronic properties of boron carbide at ambient conditions initially decrease and finally vanish with pressure increasing. We obtain this immediately from transparency photos, allowing to estimate the pressure-dependent variation of the absorption edge rapidly increasing around 55 GPa. Glass-like transparency at pressures exceeding 60 GPa indicate that the width of the band exceeds ~3.1 eV thus making boron carbide a wide-gap semiconductor. Furthermore, the spectra of Raman–active phonons indicate a pressure-dependent phasemore » transition in single-crystal natB4.3C boron carbide near 35 GPa., particularly related to structural changes in connection with the C-B-C chains, while the basic icosahedral structure remains largely unaffected.« less
Sprinting for the Win; Distribution of Power Output in Women's Professional Cycling.
Peiffer, Jeremiah J; Abbiss, Chris R; Haakonssen, Eric C; Menaspà, Paolo
2018-04-24
This study examined the power output distribution and sprint characteristics of professional female road cyclists. 31 race files, representing top-five finishes, were collected from seven professional female cyclists. Files were analysed for sprint characteristics including; mean and peak power output, velocity and duration. The final 20 min before the sprint was analysed to determine the mean maximal power output (MMP) consistent with 5, 15, 30, 60, 240 and 600s durations. Throughout the race, the number of efforts for each duration exceeding 80% of its corresponding final 20-min MMP (MMP 80 ) were determined. The number of 15s efforts exceeding 80% of the mean final sprint power output (MSP 80 ) were determined. Sprint finishes lasted 21.8 ± 6.7s with a mean and peak power output of 679 ± 101W and 886 ± 91W, respectively. Throughout the race, more 5, 15, and 30s efforts above MMP 80 were completed in the 5 th compared with the 1 st - 4 th quintiles of the race. 60s efforts were greater during the 5 th compared 1 st , 2 nd , and 4 th quintiles and during the 3 rd compared with 4 th quintile. More 240s efforts were recorded during the 5 th compared with 1 st and 4 th quintiles. 82% of 15s efforts above MSP 80 were completed in the 2 nd , 3 rd and 5 th quintiles of the race. This data demonstrates the variable nature of women's professional cycling and the physical demands necessary for success; thus providing information that could enhance in-race decision-making and the development of race-specific training programs.
Funaki, Kaoru; Fukunishi, Hidenobu; Maeda, Tetsuo; Ohbayashi, Chiho; Yamaguchi, Satoshi
2011-05-01
We report a case of multicystic adenomyosis, which is an exceedingly rare benign tumor. The patient complained of an irregular menstrual cycle and abnormal genital bleeding that gradually increased in amount and frequency. The patient finally became severely anemic, and a hysterectomy was therefore performed. T2-weighted magnetic resonance imaging (MRI) indicated hyperplasia of the endometrium, with a myometrial lesion, where a high signal intensity multicystic mass was observed. The preoperative diagnosis was complicated by confusing MRI results. Postoperative macroscopic examination revealed a villous endometrium and a myometrium thickened with multiple small cysts containing serous transparent fluid. The final diagnosis, based on the hysterectomy specimen, was adenomyosis coexisting with simple endometrial hyperplasia. The MRI and positron emission tomography images are presented.
78 FR 10367 - Appraisals for Higher-Priced Mortgage Loans
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-13
...The Board, Bureau, FDIC, FHFA, NCUA, and OCC (collectively, the Agencies) are issuing a final rule to amend Regulation Z, which implements the Truth in Lending Act (TILA), and the official interpretation to the regulation. The revisions to Regulation Z implement a new provision requiring appraisals for ``higher-risk mortgages'' that was added to TILA by the Dodd-Frank Wall Street Reform and Consumer Protection Act (the Dodd-Frank Act or Act). For mortgages with an annual percentage rate that exceeds the average prime offer rate by a specified percentage, the final rule requires creditors to obtain an appraisal or appraisals meeting certain specified standards, provide applicants with a notification regarding the use of the appraisals, and give applicants a copy of the written appraisals used.
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1993-12-01
As a result of the 1989 Exxon Valdez oil spill, commercial salmon fishing in and around the Kodiak and Chignik areas was severely restricted throughout the 1989 season. Consequently, pink salmon escapements for these areas greatly exceeded targeted escapement objectives. Investigations were conducted within the Kodiak and Chignik Management Areas during 1989 and 1990 to determine if negative impacts on future odd-year brood line pink salmon production occurred as a result of overescapement in 1989.
Annual Report (60th) of the Chief, National Guard Bureau for the Fiscal Year 1966
1966-06-30
of this amount was contracten to a com- mercial advertising agency for tht development and production of printed, radio and television materials to...final months brought 30 June 1966 strength down to 420,924. The 418,500 programmed strength however, was exceeded by 2,424. Some factors ...this time. LOGISTICS The logistical situation of the Army National Guard in FY 66 was influenced by two major factors : a. Reorganization of
ERIC Educational Resources Information Center
Metropolitan Baltimore Council of AFL-CIO Unions, MD.
The Labor Education Achievement Program (LEAP) exceeded its recruitment and enrollment goal for April 1990 to June 1991. The number of union workers receiving services was 697 in 59 classes at 20 sites. Recruitment success was made possible by the use of the communication networks of the Baltimore AFL-CIO Metropolitan Council of Unions and public…
Vehicle Integrated Prognostic Reasoner (VIPR) Final Report
NASA Technical Reports Server (NTRS)
Bharadwaj, Raj; Mylaraswamy, Dinkar; Cornhill, Dennis; Biswas, Gautam; Koutsoukos, Xenofon; Mack, Daniel
2013-01-01
A systems view is necessary to detect, diagnose, predict, and mitigate adverse events during the flight of an aircraft. While most aircraft subsystems look for simple threshold exceedances and report them to a central maintenance computer, the vehicle integrated prognostic reasoner (VIPR) proactively generates evidence and takes an active role in aircraft-level health assessment. Establishing the technical feasibility and a design trade-space for this next-generation vehicle-level reasoning system (VLRS) is the focus of our work.
Magnetoencephalography with temporal spread imaging to visualize propagation of epileptic activity.
Shibata, Sumiya; Matsuhashi, Masao; Kunieda, Takeharu; Yamao, Yukihiro; Inano, Rika; Kikuchi, Takayuki; Imamura, Hisaji; Takaya, Shigetoshi; Matsumoto, Riki; Ikeda, Akio; Takahashi, Ryosuke; Mima, Tatsuya; Fukuyama, Hidenao; Mikuni, Nobuhiro; Miyamoto, Susumu
2017-05-01
We describe temporal spread imaging (TSI) that can identify the spatiotemporal pattern of epileptic activity using Magnetoencephalography (MEG). A three-dimensional grid of voxels covering the brain is created. The array-gain minimum-variance spatial filter is applied to an interictal spike to estimate the magnitude of the source and the time (Ta) when the magnitude exceeds a predefined threshold at each voxel. This calculation is performed through all spikes. Each voxel has the mean Ta (
Ultrahigh-resolution CT and DR scanner
NASA Astrophysics Data System (ADS)
DiBianca, Frank A.; Gupta, Vivek; Zou, Ping; Jordan, Lawrence M.; Laughter, Joseph S.; Zeman, Herbert D.; Sebes, Jeno I.
1999-05-01
A new technique called Variable-Resolution X-ray (VRX) detection that dramatically increases the spatial resolution in computed tomography (CT) and digital radiography (DR) is presented. The technique is based on a principle called 'projective compression' that allows the resolution element of a CT detector to scale with the subject or field size. For very large (40 - 50 cm) field sizes, resolution exceeding 2 cy/mm is possible and for very small fields, microscopy is attainable with resolution exceeding 100 cy/mm. Several effects that could limit the performance of VRX detectors are considered. Experimental measurements on a 16-channel, CdWO4 scintillator + photodiode test array yield a limiting MTF of 64 cy/mm (8(mu) ) in the highest-resolution configuration reported. Preliminary CT images have been made of small anatomical specimens and small animals using a storage phosphor screen in the VRX mode. Measured detector resolution of the CT projection data exceeds 20 cy/mm (less than 25 (mu) ); however, the final, reconstructed CT images produced thus far exhibit 10 cy/mm (50 (mu) ) resolution because of non-flatness of the storage phosphor plates, focal spot effects and the use of a rudimentary CT reconstruction algorithm. A 576-channel solid-state detector is being fabricated that is expected to achieve CT image resolution in excess of that of the 26-channel test array.
A Low Velocity 0.30-cal. Gun System
2015-02-01
control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. 1. REPORT DATE (DD-MM-YYYY) February 2015 2. REPORT TYPE Final 3. DATES COVERED...298 (Rev. 8/98) Prescribed by ANSI Std. Z39.18 iii Contents List of Figures iv List of Tables iv 1. Introduction 1 2. Approach 4 3...the speed of sound in air. It is exceedingly difficult to get precise velocity control of gun-fired FSPs in this velocity regime using a
Final environmental impact statement for Ames Research Center
NASA Technical Reports Server (NTRS)
1971-01-01
The NASA-Ames Research Center is described. together with the nature of its activities, from which it can be seen that the center is basically not a major pollution source. Geographical, and climatic characteristics of the site are described. inasmuch as they influence both the choice of disposal methods and the environmental effects of the pollutants. The known or probable pollution sources at the center are described. Where the intensities of these sources might exceed the recommended guidelines, the corrective actions that have been taken are described.
1984-01-01
can be determined. The demand for labor is met by inmigration which in general will exceed the excess demand by a factor referred to as labor market ...described above, several assumptions are made regarding future economic behavior, labor market behavior, expenditure patterns, and commuter...labor market frictional parameter leads to greater inmigration per each direct project worker. As more people move into the area seeking direct
1987-12-01
market its acreage for leasing purposes to other oil companies once the EIS is finalized and MRMP is adopted since the permitting process will be...procedures might warrant" means that if oil and gas market conditions were such that they exceeded the assumed "most likely" volumes of oil production...year, 1986. Appropriately, there is an antique market there now. McAdam, McAdam & Smith, and Smith Hardware all proceeded Perozzi on the site. Left is
2009-05-01
ABOVE ADDRESS. 1. REPORT DATE 1 May 2009 2 . REPORT TYPE Final 3. DATES COVERED 15 Jan 2006 – 14 Apr 2009 4. TITLE AND SUBTITLE 5a. CONTRACT...North Carolina. 2 . The total of 518 subjects is slightly short of our goal. However, we exceeded our recruitment goals for control subjects, and...data we have collected will have the greatest possible impact in the fight against PCa. Task 2 . To identify sequence variant/mutation spectrum of
Macbeth in the resource room: students with learning disabilities study Shakespeare.
Thorson, S
1995-11-01
A teacher describes a secondary English unit on Shakespeare implemented in a manner designed to take advantage of the learning differences of resource room students. After developing and investigating questions relating to Macbeth, students then read and enjoyed the drama. As a result of acquiring an understanding of Shakespeare exceeding that of students in general classes, self-esteem and academic motivation increased. Finally, connections to practice and behavioral, constructivist, feminist, and critical theories are discussed. Appendices describe specific schedules and routines.
1992-07-01
researcher but have noa been used extensively for airpor pavemen analysis. Finally, thet are wodels that have been devope in otr egb elds tha c be applied...transportation network . Every year, system demands exceed capacity in many area. The capability of our airports to continually accommodate more operations...ability to produce long-lived pavement systems providing mnaximunm benefit - dollar and non-dollar - to the airpor network . This is the cenutr function
DOE Office of Scientific and Technical Information (OSTI.GOV)
J. D. Ludowise
2006-12-12
This report provides the final hazard categorization (FHC) for the remediation of six solid waste disposal sites (referred to as burial grounds) located in the 300-FF-2 Operable Unit (OU) on the Hanford Site. These six sites (618-1, 618-2, 618-3, 618-7, 618-8, and 618-13 Burial Grounds) were determined to have a total radionuclide inventory (WCH 2005a, WCH 2005d, WCH 2005e and WCH 2006b) that exceeds the DOE-STD-1027 Category 3 threshold quantity (DOE 1997) and are the subject of this analysis. This FHC document examines the hazards, identifies appropriate controls to manage the hazards, and documents the FHC and commitments for themore » 300-FF-2 Burial Grounds Remediation Project.« less
SNAP-8 electrical generating system development program
NASA Technical Reports Server (NTRS)
1971-01-01
The SNAP-8 program has developed the technology base for one class of multikilowatt dynamic space power systems. Electrical power is generated by a turbine-alternator in a mercury Rankine-cycle loop to which heat is transferred and removed by means of sodium-potassium eutectic alloy subsystems. Final system overall criteria include a five-year operating life, restartability, man rating, and deliverable power in the 90 kWe range. The basic technology was demonstrated by more than 400,000 hours of major component endurance testing and numerous startup and shutdown cycles. A test system, comprised of developed components, delivered up to 35 kWe for a period exceeding 12,000 hours. The SNAP-8 system baseline is considered to have achieved a level of technology suitable for final application development for long-term multikilowatt space missions.
Tank 241-T-204, core 188 analytical results for the final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nuzum, J.L.
TANK 241-T-204, CORE 188, ANALYTICAL RESULTS FOR THE FINAL REPORT. This document is the final laboratory report for Tank 241 -T-204. Push mode core segments were removed from Riser 3 between March 27, 1997, and April 11, 1997. Segments were received and extruded at 222-8 Laboratory. Analyses were performed in accordance with Tank 241-T-204 Push Mode Core Sampling and analysis Plan (TRAP) (Winkleman, 1997), Letter of instruction for Core Sample Analysis of Tanks 241-T-201, 241- T-202, 241-T-203, and 241-T-204 (LAY) (Bell, 1997), and Safety Screening Data Qual@ Objective (DO) ODukelow, et al., 1995). None of the subsamples submitted for totalmore » alpha activity (AT) or differential scanning calorimetry (DC) analyses exceeded the notification limits stated in DO. The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems Technical Basis Group and are not considered in this report.« less
Analysis of a Destructive Wind Storm on 16 November 2008 in Brisbane, Australia
Richter, Harald; Peter, Justin; Collis, Scott
2014-08-25
During the late afternoon on 16 November 2008 the Brisbane (Australia) suburb of “The Gap” experienced extensive wind damage caused by an intense local thunderstorm. The CP2 research radar nearby detected near-surface radial velocities exceeding 44 m s -1 above The Gap while hail size reports did not exceed golf ball size, and no tornadoes were reported. This study shows that the storm environment was characterized by a layer of very moist (mixing ratios exceeding 12 g kg -1) near-surface air embedded in strong storm-relative low-level flow, whereas the storm-relative winds aloft were significantly weaker. And while the thermodynamic stormmore » environment contained a range of downdraft promoting ingredients such as a ~4 km high melting level above a ~2 km deep layer with nearly dry adiabatic lapse rates mostly collocated with dry ambient air, a ~1 km deep stable layer near the ground would generally lower expectations of destructive surface winds based on the downburst mechanism. We also found that once observed reflectivities exceed 70 dBZ that downdraft cooling due to hail melting and downdraft acceleration based on hail loading are likely to become non-negligible forcing mechanisms for a strong downdraft. The study found a close proximity of the hydrostatically and dynamically driven mesohigh at the base of the downdraft to a dynamically driven mesolow associated with a radar-observed low-level circulation. This proximity is hypothesized to have been instrumental in the observed anisotropic horizontal acceleration of the near-ground outflow and the ultimate strength of the Gap storm surface winds. Finally, we speculate that the 44 weak storm-relative midlevel winds allowed the downdraft to descend close to the low45 level circulation which set up this strong horizontal perturbation pressure gradient.« less
High-pressure phase transition makes B 4.3 C boron carbide a wide-gap semiconductor
Hushur, Anwar; Manghnani, Murli H.; Werheit, Helmut; ...
2016-01-11
Single-crystal B4.3C boron carbide is investigated concerning the pressure-dependence of optical properties and of Raman-active phonons up to ~70 GPa. The high concentration of structural defects determining the electronic properties of boron carbide at ambient conditions initially decrease and finally vanish with pressure increasing. We obtain this immediately from transparency photos, allowing to estimate the pressure-dependent variation of the absorption edge rapidly increasing around 55 GPa. Glass-like transparency at pressures exceeding 60 GPa indicate that the width of the band exceeds ~3.1 eV thus making boron carbide a wide-gap semiconductor. Furthermore, the spectra of Raman–active phonons indicate a pressure-dependent phasemore » transition in single-crystal natB4.3C boron carbide near 35 GPa., particularly related to structural changes in connection with the C-B-C chains, while the basic icosahedral structure remains largely unaffected.« less
Performance of small water treatment plants: The case study of Mutshedzi Water Treatment Plant
NASA Astrophysics Data System (ADS)
Makungo, R.; Odiyo, J. O.; Tshidzumba, N.
The performance of small water treatment plants (SWTPs) was evaluated using Mutshedzi WTP as a case study. The majority of SWTPs in South Africa (SA) that supply water to rural villages face problems of cost recovery, water wastages, limited size and semi-skilled labour. The raw and final water quality analyses and their compliance were used to assess the performance of the Mutshedzi WTP. Electrical conductivity (EC), pН and turbidity were measured in the field using a portable multimeter and a turbidity meter respectively. Atomic Absorption Spectrometry and Ion Chromatography were used to analyse metals and non-metals respectively. The results were compared with the Department of Water Affairs (DWA) guidelines for domestic use. The turbidity levels partially exceeded the recommended guidelines for domestic water use of 1 NTU. The concentrations of chemical parameters in final water were within the DWA guidelines for domestic water use except for fluoride, which exceeded the maximum allowable guideline of 1.5 mg/L in August 2009. Mutshedzi WTP had computed compliance for raw and final water analyses ranging from 79% to 93% and 86% to 93% throughout the sampling period, respectively. The results from earlier studies showed that the microbiological quality of final water in Mutshedzi WTP complied with the recommended guidelines, eliminating the slight chance of adverse aesthetic effects and infectious disease transmission associated with the turbidity values between 1 and 5 NTU. The study concluded that Mutshedzi WTP, though moving towards compliance, is still not producing adequate quality of water. Other studies also indicated that the quantity of water produced from Mutshedzi WTP was inadequate. The findings of the study indicate that lack of monitoring of quantity of water supplied to each village, dosage of treatment chemicals, the treatment capacity of the WTP and monitoring the quality of water treated are some of the factors that limit the performance of Mutshedzi WTP. These have been confirmed in literature to be widespread in similar WTPs in SA. It is recommended that water meters be provided and the community be advised to subsidise the cost of water supply. The study recommended that the treatments of turbidity and fluoride should form critical functions of the plant to ensure that final water for domestic use is always safe from any harmful substances or disease causing pathogens. The study concluded that the WTP only needs minor improvement to boost its efficiency with regard to the treatment of raw water. This will also ensure that the plant achieves 100% compliance for final water.
Farias, Catharinne C; Resqueti, Vanessa; Dias, Fernando A L; Borghi-Silva, Audrey; Arena, Ross; Fregonezi, Guilherme A F
2014-01-01
The current study evaluated the costs and benefits of a simple aerobic walking program for patients with chronic obstructive pulmonary disease (COPD). This was a blinded randomized controlled clinical trial that recruited 72 patients diagnosed with COPD, 40 of whom were included in the study and divided into two groups [control group (CG) and pulmonary rehabilitation group (GPR)]. We assessed pulmonary function, distance covered during the 6-minute walk test (6MWT), respiratory and peripheral muscle strength, health-related quality of life (HRQOL), body composition, and level of activities of daily living (ADLs) before and after an 8-week walking program. The financial costs were calculated according to the pricing table of the Brazilian Unified Health System (SUS). Only 34 of the 40 patients remained in the final sample; 16 in the CG and 18 in the GPR (FEV1: 50.9 ± 14% predicted and FEV1: 56 ± 0.5% predicted, respectively). The intervention group exhibited improvements in the 6MWT, sensation of dyspnea and fatigue, work performed, BODE index (p<0.01), HRQOL, ADL level (p<0.001), and lower limb strength (p<0.05). The final mean cost per patient for the GPR was R$ 148.75 (~US$ 75.00) and no patient significantly exceeded this value. However, 2 patients in the CG did exceed this value, incurring a cost of R$ 689.15 (~US$ 345.00). Aerobic walking demonstrated significant clinical benefits in a cost-efficient manner in patients with COPD.
NASA Astrophysics Data System (ADS)
Hozumi, Naohiro; Nishioka, Koji; Suematsu, Takeshi; Murakami, Yoshinobu; Nagao, Masayuki; Sakata, Hiroshi
Feasibility of self-healing insulation system was studied. A silicone rubber without filler was mounted on a glass substrate with a needle electrode. An ac voltage with 4 kV in rms was applied. The voltage was cut off when the tree had propagated into 150 micrometers in length. After the cut-off, the partial discharge inception voltage was periodically observed. The partial discharge inception voltage had once reduced into as low as 2 kV. However, it gradually increased with time, and finally exceeded the tree inception voltage (4 kV) when 30 - 60 hours had passed. It was also observed by optical microscope that the tree gradually disappeared in parallel with the recovery of the partial discharge inception voltage. The same phenomenon was observed even if 1 kV ac voltage had been continuously applied during the process of the recovery. A simulation using a needle-shaped void was performed in order to clarify the mechanism of the self-healing effect. It was observed that the tip of the needle-shaped void gradually got wet with a liquid material. It would be the result of "bleed-out" of the low molecular component included in the rubber. The tip of the void was finally filled with the liquid, however, the rest of the needle-shaped void stayed without being filled. In this type of tree, it was suggested that the self-healing effect is expected if the diameter of the tree did not exceed ca. 5 micrometers.
Performance of five Montreal West Island home composters.
Adhikari, Bijaya K; Trémier, Anne; Barrington, Suzelle
2012-01-01
Even if home composting can eliminate municipal organic waste collection, handling and treatment costs, its compost quality requires investigation outside the laboratory. A study was thus conducted to evaluate the influence of the following management practices on the compost quality produced by five backyards home composters in Montreal West Island from June to October 2010: the type and backyard location of the home composter (HC), and the rate and type of organic waste (OW) fed into the home composter. The parameters monitored were compost temperature and final characteristics including trace elements and pathogens. For all HC compost, maximum but not necessarily thermophilic temperatures were highly probable within one week of adding more than 10 kg of OW composed of equal volumes of food waste (FW) and yard trimmings (YT). Top and bottom HC perforations enhanced convective aeration but concentrated OW decomposition within the bottom layer. Fed an equal volume of FW and YT, the final HC compost had a dry and organic matter content exceeding 30%, and 50%, respectively, and a total nitrogen, phosphorous and potassium level of 2, 1 and 3% on a dry matter basis, representing a good quality soil amendment. Clean OW feeding resulted in compost respecting Canadian and European regulations for Escherichia coli and Salmonella, irrespective of the temperature regime. For trace elements, regulatory limits may be exceeded when the home composter is fed ashes and soil. Homeowners must also be careful when applying pesticides to their lawns and gardens and then feeding the residues to the home composter.
Comparison of leaching characteristics of heavy metals from bottom and fly ashes in Korea and Japan.
Shim, Young-Sook; Rhee, Seung-Whee; Lee, Woo-Keun
2005-01-01
The objective of this research was to compare the leaching characteristics of heavy metals such as cadmium, chromium, copper, nickel, lead, etc., in Korean and Japanese municipal solid waste incineration (MSWI) ash. The rate of leaching of heavy metal was measured by KSLT and JTL-13, and the amount of heavy metals leached was compared with the metal content in each waste component. Finally, bio-availability testing was performed to assess the risks associated with heavy metals leached from bottom ash and fly ash. From the results, the value of neutralization ability in Japanese fly ash was four times higher than that in Korean fly ash. The reason was the difference in the content of Ca(OH)(2) in fly ash. The amount of lead leached exceeded the regulatory level in both Japanese and Korean fly ash. The rate of leaching was relatively low in ash with a pH in the range of 6-10. The bio-availability test in fly ash demonstrated that the amount of heavy metals leached was Pb>Cd>Cr, but the order was changed to Pb>Cr>Cd in the bottom ash. The leaching concentration of lead exceeded the Japanese risk level in all fly ashes from the two countries, but the leaching concentration of cadmium exceeded the regulatory level in Korean fly ash only.
SNAP-8 electrical generating system development program
NASA Technical Reports Server (NTRS)
1971-01-01
The SNAP-8 program has developed the technology base for one class of multikilowatt dynamic space power systems. Electrical power is generated by a turbine-alternator in a mercury Rankine-cycle loop to which heat is transferred and removed by means of sodium-potassium eutectic alloy subsystems. Final system overall criteria include a five-year operating life, restartability, man rating, and deliverable power in the 90 kWe range. The basic technology has been demonstrated by more than 400,000 hours of major component endurance testing and numerous startup and shutdown cycles. A test system, comprised of developed components, delivered up to 35 kWe for a period exceeding 12,000 hours. The SNAP-8 system baseline is considered to have achieved a level of technology suitable for final application development for long-term multikilowatt space missions.
Maramba, Nelia P C; Reyes, Jose Paciano; Francisco-Rivera, Ana Trinidad; Panganiban, Lynn Crisanta R; Dioquino, Carissa; Dando, Nerissa; Timbang, Rene; Akagi, Hirokatsu; Castillo, Ma Teresa; Quitoriano, Carmela; Afuang, Maredith; Matsuyama, Akito; Eguchi, Tomomi; Fuchigami, Youko
2006-10-01
Abandoned mines are an important global concern and continue to pose real or potential threats to human safety and health including environmental damage/s. Very few countries had government mine regulation and reclamation policies until the latter part of the century where legal, financial and technical procedures were required for existing mining operations. Major reasons for mine closure may be mainly due to poor economies of the commodity making mining unprofitable, technical difficulties and national security. If the mine is abandoned, more often than not it is the government that shoulders the burden of clean-up, monitoring and remediation. The topic of abandoned mines is complex because of the associated financial and legal liability implications. Abandoned mercury mines have been identified as one of the major concerns because of their significant long-term environmental problems. Primary mercury production is still ongoing in Spain, Kyrgzystan, China, Algeria, Russia and Slovakia while world production declined substantially in the late 1980s. In the Philippines, the mercury mine located southeast of Manila was in operation from 1955 to 1976, before ceasing operation because of the decline in world market price for the commodity. During this time, annual production of mercury was estimated to be about 140,000 kg of mercury yearly. Approximately 2,000,000 t of mine-waste calcines (retorted ore) were produced during mining and roughly 1,000,000 t of these calcines were dumped into nearby Honda Bay to construct a jetty to facilitate mine operations where about 2000 people reside in the nearby three barangays. In October, 1994 the Department of Health received a request from the Provincial Health Office for technical assistance relative to the investigation of increasing complaints of unusual symptoms (e.g. miscarriages, tooth loss, muscle weakness, paralysis, anemia, tremors, etc.) among residents of three barangays. Initial health reports revealed significant elevation of blood mercury levels exceeding the then recommended exposure level of 20ppb in 12 out of the 43 (27.9%) residents examined. The majority of the volunteers were former mine workers. In this study the abnormal findings included gingivitis, mercury lines, gum bleeding and pterydium. The most common neurologic complaints were numbness, weakness, tremors and incoordination. Anemia and elevated liver function tests were also seen in a majority of those examined. The assessment also revealed a probable association between blood mercury level and eosinophilia. The same association was also seen between high mercury levels and the presence of tremors and working in the mercury mine. To date, there are very limited environmental and health studies on the impact of both total and methylmercury that have been undertaken in the Philippines. Thus, this area of study was selected primarily because of its importance as an emerging issue in the country, especially regarding the combined effects of total and methylmercury low-dose and continuous uptake from environmental sources. At present the effects of total mercury exposure combined with MeHg consumption remain an important issue, especially those of low-dose and continuous uptake. Results of the study showed that four (4) species of fish, namely ibis, tabas, lapu-lapu and torsillo, had exceeded the recommended total mercury and methylmercury levels in fish (NV>0.5 microg/gf.w., NV>0.3 microg/gf.w., respectively). Saging and kanuping also exceeded the permissible levels for methylmercury. Total and methylmercury in canned fish, and total mercury in rice, ambient air and drinking water were within the recommended levels, however, additional mercury load from these sources may contribute to the over-all body burden of mercury among residents in the area. Surface water quality at the mining area, Honda Bay and during some monitoring periods at Palawan Bay exceeded total mercury standards (NV>0.002 ng/mL). Soil samples in two sites, namely Tagburos and Honda Bay, exceeded the EPA Region 9 Primary Remediation Goal recommended values for total mercury for residential purposes (NV>23 mg/kg). The hand to mouth activity among infants and children is another significant route for mercury exposure. Statistically significant results were obtained for infants when comparing the results after one year of monitoring for methylmercury levels in hair for both exposed and control sub-groups. Likewise, comparing the initial and final hair methylmercury levels among pregnant women/mothers in the exposed group showed statistically significant (p<0.05) results. Comparing the exposed and control sub-groups' mercury hair levels per sub-group showed statistically significant results among the following: (a) initial and final total mercury hair levels among children, (b) initial and final methylmercury hair levels among children, (c) final total mercury hair levels among pregnant women, (d) initial and final total mercury hair levels among mothers, and (e) initial and final methyl hair levels among mothers.
1987-12-01
this acreage represents good hydrocarbon potential). As a matter of fact, it is Newhall Resources’ intention to actively market its acreage for leasing...gas market conditions were such that they exceeded the assumed "most likely" volumes of oil production over the next 40 years identified in Table 2-1 of...years aqo and the bottom floor housed Perozzi Hardware until it went out of business this year, 1986. Appropriately, there is an antique market there
Skylab thruster attitude control system
NASA Technical Reports Server (NTRS)
Wilmer, G. E., Jr.
1974-01-01
Preflight activities and the Skylab mission support effort for the thruster attitude control system (TACS) are documented. The preflight activities include a description of problems and their solutions encountered in the development, qualification, and flight checkout test programs. Mission support effort is presented as it relates to system performance assessment, real-time problem solving, flight anomalies, and the daily system evaluation. Finally, the detailed flight evaluation is presented for each phase of the mission using system telemetry data. Data assert that the TACS met or exceeded design requirements and fulfilled its assigned mission objectives.
1993-03-01
Roast beef sandwich (on white bread), ham and Boxed Meal Contents During Desert Storm. cheese sandwich (on white bread), cherry drink, orange drink...The day to day variation in precision during the study, had the measured analytes exceeding the cutpoints set given as the coefficient of variation of...errors in the estimation of LDL cholesterol dure . (LDLc).Clin Chem, 1985,31:940(abs 239). Finally the blood HDLc concentration cannot be employed 9
GSDO Program Hexavalent Chrome Alternatives: Final Pretreatments Test Report
NASA Technical Reports Server (NTRS)
Kessel, Kurt
2013-01-01
Hexavalent chrome free pretreatments should be considered for use on Ground Support Equipment (OSE) and Electrical Ground Support Equipment (EOSE). Both of the hexavalent chrome free pretreatments (Metalast TCP HF and SurTec 650C) evaluated by this project met, and in some instances exceeded, the requirements ofMIL-DTL-5541 "Chemical Conversion Coatings on Aluminum and Aluminum Alloys". For DC resistance measurements, both Metalast TCP HF and SurTec (!50C met initial requirements following assembly and in many cases continued to maintain passing readings for the duration of testing.
Weaver, J. Curtis; Feaster, Toby D.; Gotvald, Anthony J.
2009-01-01
Reliable estimates of the magnitude and frequency of floods are required for the economical and safe design of transportation and water-conveyance structures. A multistate approach was used to update methods for estimating the magnitude and frequency of floods in rural, ungaged basins in North Carolina, South Carolina, and Georgia that are not substantially affected by regulation, tidal fluctuations, or urban development. In North Carolina, annual peak-flow data available through September 2006 were available for 584 sites; 402 of these sites had a total of 10 or more years of systematic record that is required for at-site, flood-frequency analysis. Following data reviews and the computation of 20 physical and climatic basin characteristics for each station as well as at-site flood-frequency statistics, annual peak-flow data were identified for 363 sites in North Carolina suitable for use in this analysis. Among these 363 sites, 19 sites had records that could be divided into unregulated and regulated/ channelized annual peak discharges, which means peak-flow records were identified for a total of 382 cases in North Carolina. Considering the 382 cases, at-site flood-frequency statistics are provided for 333 unregulated cases (also used for the regression database) and 49 regulated/channelized cases. The flood-frequency statistics for the 333 unregulated sites were combined with data for sites from South Carolina, Georgia, and adjacent parts of Alabama, Florida, Tennessee, and Virginia to create a database of 943 sites considered for use in the regional regression analysis. Flood-frequency statistics were computed by fitting logarithms (base 10) of the annual peak flows to a log-Pearson Type III distribution. As part of the computation process, a new generalized skew coefficient was developed by using a Bayesian generalized least-squares regression model. Exploratory regression analyses using ordinary least-squares regression completed on the initial database of 943 sites resulted in defining five hydrologic regions for North Carolina, South Carolina, and Georgia. Stations with drainage areas less than 1 square mile were removed from the database, and a procedure to examine for basin redundancy (based on drainage area and periods of record) also resulted in the removal of some stations from the regression database. Flood-frequency estimates and basin characteristics for 828 gaged stations were combined to form the final database that was used in the regional regression analysis. Regional regression analysis, using generalized least-squares regression, was used to develop a set of predictive equations that can be used for estimating the 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent chance exceedance flows for rural ungaged, basins in North Carolina, South Carolina, and Georgia. The final predictive equations are all functions of drainage area and the percentage of drainage basin within each of the five hydrologic regions. Average errors of prediction for these regression equations range from 34.0 to 47.7 percent. Discharge estimates determined from the systematic records for the current study are, on average, larger in magnitude than those from a previous study for the highest percent chance exceedances (50 and 20 percent) and tend to be smaller than those from the previous study for the lower percent chance exceedances when all sites are considered as a group. For example, mean differences for sites in the Piedmont hydrologic region range from positive 0.5 percent for the 50-percent chance exceedance flow to negative 4.6 percent for the 0.2-percent chance exceedance flow when stations are grouped by hydrologic region. Similarly for the same hydrologic region, median differences range from positive 0.9 percent for the 50-percent chance exceedance flow to negative 7.1 percent for the 0.2-percent chance exceedance flow. However, mean and median percentage differences between the estimates from the previous and curre
Observed ozone exceedances in Italy: statistical analysis and modelling in the period 2002-2015
NASA Astrophysics Data System (ADS)
Falasca, Serena; Curci, Gabriele; Candeloro, Luca; Conte, Annamaria; Ippoliti, Carla
2017-04-01
Local ambient air quality is strongly influenced by anthropogenic emissions and meteorological conditions. The year 2015 is considered by NASA scientists as one of the hottest at the global scale since 1880. Furthermore, in Europe it was the first summer after the introduction of Euro6 regulation, the latest emission standard for passenger vehicles. The goal of this study is twofold: (1) the investigation of the impact of the heat wave occurred in the summer of 2015 on ozone levels and (2) the exploration of the weight of temperature as driver of high-level ozone events with respect to other variables. We performed a quantitative examination of the ozone seasons (May-September) for the period 2002-2015 using ozone concentration and weather data from 24 stations across Italy. The number of exceedances of limit values set by the European directive was calculated for each year, and compared with the trend of ozone concentration and temperature. Furthermore, the data were grouped in clusters of consecutive days of ozone exceedances in order to characterize the duration and the intensity of high ozone events. Finally, we developed a multivariate logistic regression model to investigate the role of a set of independent variables (meteorological, and temporal variables, altitude, number of inhabitants, vehicle emission standard) on the probability of exceedances. Results show that 2015 is one of the hottest years after 2003. During the period 2002-2015, the average number of exceedances per station of the daily maximum 8-hour average is often higher than the limit established by the European directive (25 per year). The highest number of exceedances was 65 per station, reached in 2003. The Po Valley is confirmed as a hot spot for pollution, with more frequent exceedances and a higher sensitivity to temperature, especially at urban sites. Ozone events in 2015 were fewer than recent years, but of longer duration (on average 4 days against 3 days), and with similar mean concentrations. On the other hand, high-temperature events have similar duration and higher mean temperature with respect to recent years, pointing out that temperature is not the only driver of high-ozone events. The statistical model confirms a significant impact of the meteorological variables (positive for temperature and pressure, negative for humidity and wind speed) on the probability of ozone events. Significant predictors are also the altitude (negative) and the number of inhabitants (positive). The decreasing observed recent trend is explained by the introduction of the Euro regulations, rather than natural variability. However, we find an inversion of trend for the more recent period under Euro6 (from September 2014), but we cautionary wait a confirmation from additional data at least for the year 2016.
Farias, Catharinne C.; Resqueti, Vanessa; Dias, Fernando A. L.; Borghi-Silva, Audrey; Arena, Ross; Fregonezi, Guilherme A. F.
2014-01-01
Objective The current study evaluated the costs and benefits of a simple aerobic walking program for patients with chronic obstructive pulmonary disease (COPD). Method This was a blinded randomized controlled clinical trial that recruited 72 patients diagnosed with COPD, 40 of whom were included in the study and divided into two groups [control group (CG) and pulmonary rehabilitation group (GPR)]. We assessed pulmonary function, distance covered during the 6-minute walk test (6MWT), respiratory and peripheral muscle strength, health-related quality of life (HRQOL), body composition, and level of activities of daily living (ADLs) before and after an 8-week walking program. The financial costs were calculated according to the pricing table of the Brazilian Unified Health System (SUS). Results Only 34 of the 40 patients remained in the final sample; 16 in the CG and 18 in the GPR (FEV1: 50.9±14% predicted and FEV1: 56±0.5% predicted, respectively). The intervention group exhibited improvements in the 6MWT, sensation of dyspnea and fatigue, work performed, BODE index (p<0.01), HRQOL, ADL level (p<0.001), and lower limb strength (p<0.05). The final mean cost per patient for the GPR was R$ 148.75 (~US$ 75.00) and no patient significantly exceeded this value. However, 2 patients in the CG did exceed this value, incurring a cost of R$ 689.15 (~US$ 345.00). Conclusion Aerobic walking demonstrated significant clinical benefits in a cost-efficient manner in patients with COPD. PMID:24838809
Petrie, Bruce; McAdam, Ewan J; Whelan, Mick J; Lester, John N; Cartmell, Elise
2013-04-01
An ultra performance liquid chromatography method coupled to a triple quadrupole mass spectrometer was developed to determine nonylphenol and 15 of its possible precursors (nonylphenol ethoxylates and nonylphenol carboxylates) in aqueous and particulate wastewater matrices. Final effluent method detection limits for all compounds ranged from 1.4 to 17.4 ng l(-1) in aqueous phases and from 1.4 to 39.4 ng g(-1) in particulate phases of samples. The method was used to measure the performance of a trickling filter wastewater treatment works, which are not routinely monitored despite their extensive usage. Relatively good removals of nonylphenol were observed over the biological secondary treatment process, accounting for a 53 % reduction. However, only an 8 % reduction in total nonylphenolic compound load was observed. This was explained by a shortening in ethoxylate chain length which initiated production of shorter polyethoxylates ranging from 1 to 4 ethoxylate units in length in final effluents. Modelling the possible impact of trickling filter discharge demonstrated that the nonylphenol environmental quality standard may be exceeded in receiving waters with low dilution ratios. In addition, there is a possibility that the EQS can be exceeded several kilometres downstream of the mixing zone due to the biotransformation of readily degradable short-chained precursors. This accentuates the need to monitor 'non-priority' parent compounds in wastewater treatment works since monitoring nonylphenol alone can give a false indication of process performance. It is thus recommended that future process performance monitoring and optimisation is undertaken using the full suite of nonylphenolic moieties which this method can facilitate.
A simplified model for equilibrium and transient swelling of thermo-responsive gels.
Drozdov, A D; deClaville Christiansen, J
2017-11-01
A simplified model is developed for the elastic response of thermo-responsive gels subjected to swelling under an arbitrary deformation with finite strains. The constitutive equations involve five adjustable parameters that are determined by fitting observations in equilibrium water uptake tests and T-jump transient tests on thin gel disks. Two scenarios for water release under heating are revealed by means of numerical simulation. When the final temperature in a T-jump test is below the volume-phase transition temperature, deswelling is characterized by smooth distribution of water molecules and small tensile stresses. When the final temperature exceeds the critical temperature, a gel disk is split into three regions (central part with a high concentration of water molecules and two domains near the boundaries with low water content) separated by sharp interfaces, whose propagation is accompanied by development of large (comparable with the elastic modulus) tensile stresses. Copyright © 2017 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Stauning, Peter
2018-04-01
The Polar Cap (PC) indices were approved by the International Association for Geomagnetism and Aeronomy (IAGA) in 2013 and made available at the web portal http://pcindex.org holding prompt (real-time) as well as archival index values. The present note provides the first reported examination of the validity of the IAGA-endorsed method to generate real-time PC index values. It is demonstrated that features of the derivation procedure defined by Janzhura and Troshichev (2011) may cause considerable excursions in the real-time PC index values compared to the final index values. In examples based on occasional downloads of index values, the differences between real-time and final values of PC indices were found to exceed 3 mV m-1, which is a magnitude level that may indicate (or hide) strong magnetic storm activity.
Pugliese, Andrea; Gumel, Abba B; Milner, Fabio A; Velasco-Hernandez, Jorge X
2018-02-01
Three deterministic Kermack-McKendrick-type models for studying the transmission dynamics of an infection in a two-sex closed population are analyzed here. In each model it is assumed that infection can be transmitted through heterosexual contacts, and that there is a higher probability of transmission from one sex to the other than vice versa. The study is focused on understanding whether and how this bias in transmission reflects in sex differences in final attack ratios (i.e. the fraction of individuals of each sex that eventually gets infected). In the first model, where the other two transmission modes are not considered, the attack ratios (fractions of the population of each sex that will eventually be infected) can be obtained as solutions of a system of two nonlinear equations, that has a unique solution if the net reproduction number exceeds unity. It is also shown that the ratio of attack ratios depends solely on the ratio of gender-specific susceptibilities and on the basic reproductive number of the epidemic Ro, and that the gender-specific final attack-ratio is biased in the same direction as the gender-specific susceptibilities. The second model allows also for infection transmission through direct, non-sexual, contacts. In this case too, an analytical expression is derived from which the attack ratios can be obtained. The qualitative results are similar to those obtained for the previous model, but another important parameter for determining the value of the ratio between the attack ratios in the two sexes is obtained, the relative weight of direct vs. heterosexual transmission (namely, ρ). Quantitatively, the ratio of final attack ratios generally will not exceed 1.5, if non-sexual transmission accounts for most transmission events (ρ≥0.6) and the ratio of gender-specific susceptibilities is not too large (say, 5 at most). The third model considers vector-borne, instead of direct transmission. In this case, we were not able to find an analytical expression for the final attack ratios, but used instead numerical simulations. The results on final attack ratios are actually quite similar to those obtained with the second model. It is interesting to note that transient patterns can differ from final attack ratios, as new cases will tend to occur more often in the more susceptible sex, while later depletion of susceptibles may bias the ratio in the opposite direction. The analysis of these simple models, despite their lack of realism, can help in providing insight into, and assessment of, the potential role of gender-specific transmission in infections with multiple modes of transmission, such as Zika virus (ZIKV), by gauging what can be expected to be seen from epidemiological reports of new cases, disease incidence and seroprevalence surveys.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Matthews, Patrick
This Corrective Action Decision Document/Corrective Action Plan provides the rationale and supporting information for the selection and implementation of corrective actions at Corrective Action Unit (CAU) 413, Clean Slate II Plutonium Dispersion (TTR). CAU 413 is located on the Tonopah Test Range and includes one corrective action site, TA-23-02CS. CAU 413 consists of the release of radionuclides to the surface and shallow subsurface from the Clean Slate II (CSII) storage–transportation test conducted on May 31, 1963. The CSII test was a non-nuclear detonation of a nuclear device located inside a concrete bunker covered with 2 feet of soil. To facilitatemore » site investigation and the evaluation of data quality objectives decisions, the releases at CAU 413 were divided into seven study groups: 1 Undisturbed Areas 2 Disturbed Areas 3 Sedimentation Areas 4 Former Staging Area 5 Buried Debris 6 Potential Source Material 7 Soil Mounds Corrective action investigation (CAI) activities, as set forth in the CAU 413 Corrective Action Investigation Plan, were performed from June 2015 through May 2016. Radionuclides detected in samples collected during the CAI were used to estimate total effective dose using the Construction Worker exposure scenario. Corrective action was required for areas where total effective dose exceeded, or was assumed to exceed, the radiological final action level (FAL) of 25 millirem per year. The results of the CAI and the assumptions made in the data quality objectives resulted in the following conclusions: The FAL is exceeded in surface soil in SG1, Undisturbed Areas; The FAL is assumed to be exceeded in SG5, Buried Debris, where contaminated debris and soil were buried after the CSII test; The FAL is not exceeded at SG2, SG3, SG4, SG6, or SG7. Because the FAL is exceeded at CAU 413, corrective action is required and corrective action alternatives (CAAs) must be evaluated. For CAU 413, three CAAs were evaluated: no further action, clean closure, and closure in place. The CAAs were evaluated on technical merit focusing on performance, reliability, feasibility, safety, and cost. Based on the evaluation of analytical data from the CAI, review of future and current operations at CAU 413, and the detailed and comparative analysis of CAAs, clean closure was selected as the preferred CAA for CAU 413 by the U.S. Air Force, Nevada Division of Environmental Protection, and U.S. Department of Energy at the CAA meeting held on August 24, 2016.« less
Probability distributions of continuous measurement results for conditioned quantum evolution
NASA Astrophysics Data System (ADS)
Franquet, A.; Nazarov, Yuli V.
2017-02-01
We address the statistics of continuous weak linear measurement on a few-state quantum system that is subject to a conditioned quantum evolution. For a conditioned evolution, both the initial and final states of the system are fixed: the latter is achieved by the postselection in the end of the evolution. The statistics may drastically differ from the nonconditioned case, and the interference between initial and final states can be observed in the probability distributions of measurement outcomes as well as in the average values exceeding the conventional range of nonconditioned averages. We develop a proper formalism to compute the distributions of measurement outcomes, and evaluate and discuss the distributions in experimentally relevant setups. We demonstrate the manifestations of the interference between initial and final states in various regimes. We consider analytically simple examples of nontrivial probability distributions. We reveal peaks (or dips) at half-quantized values of the measurement outputs. We discuss in detail the case of zero overlap between initial and final states demonstrating anomalously big average outputs and sudden jump in time-integrated output. We present and discuss the numerical evaluation of the probability distribution aiming at extending the analytical results and describing a realistic experimental situation of a qubit in the regime of resonant fluorescence.
Wood, Molly S.
2014-01-01
The U.S. Geological Survey (USGS), in cooperation with the Bureau of Land Management (BLM), estimated streamflow statistics for stream segments designated “Wild,” “Scenic,” or “Recreational” under the National Wild and Scenic Rivers System in the Owyhee Canyonlands Wilderness in southwestern Idaho. The streamflow statistics were used by the BLM to develop and file a draft, federal reserved water right claim to protect federally designated “outstanding remarkable values” in the Jarbidge River. The BLM determined that the daily mean streamflow equaled or exceeded 20, 50, and 80 percent of the time during bimonthly periods (two periods per month) and the bankfull (66.7-percent annual exceedance probability) streamflow are important thresholds for maintaining outstanding remarkable values. Although streamflow statistics for the Jarbidge River below Jarbidge, Nevada (USGS 13162225) were published previously in 2013 and used for the draft water right claim, the BLM and USGS have since recognized the need to refine streamflow statistics given the approximate 40 river mile distance and intervening tributaries between the original point of estimation (USGS 13162225) and at the mouth of the Jarbidge River, which is the downstream end of the Wild and Scenic River segment. A drainage-area-ratio method was used in 2013 to estimate bimonthly exceedance probability streamflow statistics at the mouth of the Jarbidge River based on available streamgage data on the Jarbidge and East Fork Jarbidge Rivers. The resulting bimonthly streamflow statistics were further adjusted using a scaling factor calculated from a water balance on streamflow statistics calculated for the Bruneau and East Fork Bruneau Rivers and Sheep Creek. The final, adjusted bimonthly exceedance probability and bankfull streamflow statistics compared well with available verification datasets (including discrete streamflow measurements made at the mouth of the Jarbidge River) and are considered the best available estimates for streamflow statistics in the Jarbidge Wild and Scenic River segment.
Wagner, Daniel M.; Krieger, Joshua D.; Veilleux, Andrea G.
2016-08-04
In 2013, the U.S. Geological Survey initiated a study to update regional skew, annual exceedance probability discharges, and regional regression equations used to estimate annual exceedance probability discharges for ungaged locations on streams in the study area with the use of recent geospatial data, new analytical methods, and available annual peak-discharge data through the 2013 water year. An analysis of regional skew using Bayesian weighted least-squares/Bayesian generalized-least squares regression was performed for Arkansas, Louisiana, and parts of Missouri and Oklahoma. The newly developed constant regional skew of -0.17 was used in the computation of annual exceedance probability discharges for 281 streamgages used in the regional regression analysis. Based on analysis of covariance, four flood regions were identified for use in the generation of regional regression models. Thirty-nine basin characteristics were considered as potential explanatory variables, and ordinary least-squares regression techniques were used to determine the optimum combinations of basin characteristics for each of the four regions. Basin characteristics in candidate models were evaluated based on multicollinearity with other basin characteristics (variance inflation factor < 2.5) and statistical significance at the 95-percent confidence level (p ≤ 0.05). Generalized least-squares regression was used to develop the final regression models for each flood region. Average standard errors of prediction of the generalized least-squares models ranged from 32.76 to 59.53 percent, with the largest range in flood region D. Pseudo coefficients of determination of the generalized least-squares models ranged from 90.29 to 97.28 percent, with the largest range also in flood region D. The regional regression equations apply only to locations on streams in Arkansas where annual peak discharges are not substantially affected by regulation, diversion, channelization, backwater, or urbanization. The applicability and accuracy of the regional regression equations depend on the basin characteristics measured for an ungaged location on a stream being within range of those used to develop the equations.
DOE Office of Scientific and Technical Information (OSTI.GOV)
DiNapoli, N.; Fitzpatrick, M.; Strother, C.
1977-11-01
Phase I identified trends leading to the desired national social goals of the mid-1980's in vehicle crashworthiness, crash avoidance, damageability, pedestrian safety, fuel economy, emissions and cost, and characterized an RSV to satisfy them. In Phase II an RSV prototype was designed, developed and tested to demonstrate the feasibility of meeting these goals simultaneously. Although further refinement is necessary to assure operational validity, in all categories the results meet or exceed the most advanced performance specified by The Presidential Task Force on Motor Vehicle Goals beyond 1980.
Large intramuscular lipoma of the tongue.
Fitzgerald, Kara; Sanchirico, Paul J; Pfeiffer, David C
2018-04-01
We describe a case of a 57-year-old man referred to an oral maxillofacial surgeon for a nontender, large intramuscular tongue mass. A computed tomography scan with contrast showed a homogenous right tongue intramuscular fatty mass measuring 3.8 cm × 2.8 cm in the axial dimension and 2.2 cm in the craniocaudal dimension. Histologic examination revealed multiple lobulated sections of mature adipocytes and occasional entrapped skeletal muscle fibers. The final pathologic diagnosis was intramuscular lipoma. Although lipomas account for approximately 50% of all soft tissue neoplasms, intramuscular (infiltrating) lipoma of the tongue is exceedingly rare.
An update on X-ray reflection gratings developed for future missions
NASA Astrophysics Data System (ADS)
Miles, Drew
2018-01-01
X-ray reflection gratings are a key technology being studied for future X-ray spectroscopy missions, including the Lynx X-ray mission under consideration for the 2020 Decadal Survey. We present an update on the status of X-ray reflection gratings being developed at Penn State University, including current fabrication techniques and mass-replication processes and the latest diffraction efficiency results and resolving power measurements. Individual off-plane X-ray reflection gratings have exceeded the current Lynx requirements for both effective area and resolving power. Finally, we discuss internal projects that will advance the technology readiness level of these gratings.
Magnetocrystalline anisotropy in UMn 2 Ge 2 and related Mn-based actinide ferromagnets
Parker, David S.; Ghimire, Nirmal; Singleton, John; ...
2015-05-04
We presenmore » t magnetization isotherms in pulsed magnetic fields up to 62 Tesla, supported by first principles calculations, demonstrating a huge uniaxial magnetocrystalline anisotropy energy - approximately 20 MJ/m 3 - in UMn 2 Ge 2 . This large anisotropy results from the extremely strong spin-orbit coupling affecting the uranium 5 f electrons, which in the calculations exhibit a substantial orbital moment exceeding 2 μ B. Finally, we also find from theoretical calculations that a number of isostructural Mn-actinide compounds are expected to have similarly large anisotropy.« less
Role of zonal flow predator-prey oscillations in triggering the transition to H-mode confinement.
Schmitz, L; Zeng, L; Rhodes, T L; Hillesheim, J C; Doyle, E J; Groebner, R J; Peebles, W A; Burrell, K H; Wang, G
2012-04-13
Direct evidence of zonal flow (ZF) predator-prey oscillations and the synergistic roles of ZF- and equilibrium E×B flow shear in triggering the low- to high-confinement (L- to H-mode) transition in the DIII-D tokamak is presented. Periodic turbulence suppression is first observed in a narrow layer at and just inside the separatrix when the shearing rate transiently exceeds the turbulence decorrelation rate. The final transition to H mode with sustained turbulence and transport reduction is controlled by equilibrium E×B shear due to the increasing ion pressure gradient.
Future capabilities for the Deep Space Network
NASA Technical Reports Server (NTRS)
Berner, J. B.; Bryant, S. H.; Andrews, K. S.
2004-01-01
This paper will look at three new capabilities that are in different stages of development. First, turbo decoding, which provides improved telemetry performance for data rates up to about 1 Mbps, will be discussed. Next, pseudo-noise ranging will be presented. Pseudo-noise ranging has several advantages over the current sequential ranging, anmely easier operations, improved performance, and the capability to be used in a regenerative implementation on a spacecraft. Finally, Low Density Parity Check decoding will be discussed. LDPC codes can provide performance that matches or slightly exceed turbo codes, but are designed for use in the 10 Mbps range.
Evaluation studies of noise and air pollution during festival seasons in India.
Battalwar, D G; Meshram, S U; Yenkie, M K N; Puri, P J
2012-07-01
The present research work is based on assessment of noise levels and ambient air quality at selected locations during festival seasons in Nagpur city. The noise levels were exceeding the permissible limits almost at every location during the festival period. The huge emissions of smoke arising out bursting of firecrackers have significantly resulted into air pollution; particularly in terms of Sulphur Dioxide (SO2) and Respirable Suspended Particulate Matter (Fine Dust). The immediate effect of increasing noise levels is impairing of hearing that may cause auditory fatigue and finally lead to deafness.
Development of the Sunpower 35 We Free-Piston Stirling Convertor
NASA Astrophysics Data System (ADS)
Wood, J. Gary; Lane, Neill
2005-02-01
This paper describes the development and performance of the Sunpower 35 We free-piston Stirling convertor. Exceptional thermodynamic performance has been achieved in a small lightweight machine. Efficiency of over 30 percent, at a temperature ratio of 2.6 has been achieved. Specific power of the convertor in final low mass hermetically-sealed form is projected to exceed 90 watts/Kg. This convertor was developed under NASA SBIR funding. Potential applications for this convertor include highly efficient and low mass radioisotope fueled space power systems, as well as terrestrial use as a fuel fired battery replacement.
Loop corrections to primordial non-Gaussianity
NASA Astrophysics Data System (ADS)
Boran, Sibel; Kahya, E. O.
2018-02-01
We discuss quantum gravitational loop effects to observable quantities such as curvature power spectrum and primordial non-Gaussianity of cosmic microwave background (CMB) radiation. We first review the previously shown case where one gets a time dependence for zeta-zeta correlator due to loop corrections. Then we investigate the effect of loop corrections to primordial non-Gaussianity of CMB. We conclude that, even with a single scalar inflaton, one might get a huge value for non-Gaussianity which would exceed the observed value by at least 30 orders of magnitude. Finally we discuss the consequences of this result for scalar driven inflationary models.
Freixas Sepúlveda, Alejandra; Díaz Narváez, Víctor Patricio; Durán Agüero, Samuel; Gaete Verdugo, María Cristina
2013-01-01
In order to analyze the usual consumption of vitamins in an adolescent population and young adult in the Metropolitan Region, were 213 food fortified with vitamins of the Chilean market. A survey of consumption and nutrient intake was calculated. The result added vitamins added to food. The normality of the variables of the intake was assessed and data were subjected to analysis of descriptive statisticians and percentiles are determined. Estimated percentages of subjects whose values exceed those fixed for DDR and UL listed for each vitamin and percentage of excess for each case. Discriminant analysis was performed using the M Box test. The correlation canonical and the Statisticians Wilks were estimated. Finally it was estimated the percentage of correctly classified data. Data were processed by the program SPSS 20.0 with a significance level of α ≤ 0.05. The results indicate that you for all the studied vitamins, the percentage of subjects who more than the DDR is for total folate (96.4%) and the lowest percentage is given for the vitamin E and B12 in young adult women. The percentage of subjects who exceed the UL values is greatest for the vitamin B3 (91.9%). According to the canonical correlation, there are differences in behavior between the groups. It is recommended to monitor the behavior and consumption of food fortified with vitamins, especially of the complex B and A. Copyright © AULA MEDICA EDICIONES 2013. Published by AULA MEDICA. All rights reserved.
Rueda-Holgado, F; Calvo-Blázquez, L; Cereceda-Balic, F; Pinilla-Gil, E
2016-02-01
Fractionation of elemental contents in atmospheric samples is useful to evaluate pollution levels for risk assessment and pollution sources assignment. We present here the main results of long-term characterization of atmospheric deposition by using a recently developed atmospheric elemental fractionation sampler (AEFS) for major and trace elements monitoring around an important industrial complex located in Puchuncaví region (Chile). Atmospheric deposition samples were collected during two sampling campaigns (2010 and 2011) at four sampling locations: La Greda (LG), Los Maitenes (LM), Puchuncaví (PU) and Valle Alegre (VA). Sample digestion and ICP-MS gave elements deposition values (Al, As, Ba, Cd, Co, Cu, Fe, K, Mn, Pb, Sb, Ti, V and Zn) in the insoluble fraction of the total atmospheric deposition. Results showed that LG location, the closest location to the industrial complex, was the more polluted sampling site having the highest values for the analyzed elements. PU and LM were the next more polluted and, finally, the lowest elements concentrations were registered at VA. The application of Principal Component Analysis and Cluster Analysis identified industrial, traffic and mineral-crustal factors. We found critical loads exceedances for Pb at all sampling locations in the area affected by the industrial emissions, more significant in LG close to the industrial complex, with a trend to decrease in 2011, whereas no exceedances due to atmospheric deposition were detected for Cd. Copyright © 2015 Elsevier Ltd. All rights reserved.
Griffin, Susan O; Naavaal, Shillpa; Scherrer, Christina; Patel, Mona; Chattopadhyay, Sajal
2017-03-01
A recently updated Community Guide systematic review of the effectiveness of school sealant programs (SSPs) still found strong evidence that SSPs reduced dental caries among schoolchildren. This follow-up systematic review updates SSP cost and benefit information from the original 2002 review. Using Community Guide economic review methods, the authors searched the literature from January 2000 to November 20, 2014. The final body of evidence included 14 studies-ten from the current search and four with cost information from the 2002 review. Nine studies had information on SSP costs; six on sealant benefit (averted treatment costs and productivity losses); four on SSP net cost (cost minus benefit); and three on net cost to Medicaid of clinically delivered sealants. The authors imputed productivity losses and discounted costs/outcomes when this information was missing. The analysis, conducted in 2015, reported all values in 2014 U.S. dollars. The median one-time SSP cost per tooth sealed was $11.64. Labor accounted for two thirds of costs, and time to provide sealants was a major cost driver. The median annual economic benefit was $6.29, suggesting that over 4 years the SSP benefit ($23.37 at a 3% discount rate) would exceed costs by $11.73 per sealed tooth. In addition, two of four economic models and all three analyses of Medicaid claims data found that SSP benefit to society exceeded SSP cost. Recent evidence indicates the benefits of SSPs exceed their costs when SSPs target schools attended by a large number of high-risk children. Published by Elsevier Inc.
MACRA 2.0: are you ready for MIPS?
Hirsch, Joshua A; Rosenkrantz, Andrew B; Ansari, Sameer A; Manchikanti, Laxmaiah; Nicola, Gregory N
2017-07-01
The annual cost of healthcare delivery in the USA now exceeds US$3 trillion. Fee for service methodology is often implicated as a cause of this exceedingly high figure. The Affordable Care Act created the Center for Medicare and Medicaid Innovation (CMMI) to pilot test value based alternative payments for reimbursing physician services. In 2015, the Medicare Access and CHIP Reauthorization Act (MACRA) was passed into law. MACRA has dramatic implications for all US based healthcare providers. MACRA permanently repealed the Medicare Sustainable Growth Rate so as to stabilize physician part B Medicare payments, consolidated pre-existing federal performance programs into the Merit based Incentive Payments System (MIPS), and legislatively mandated new approaches to paying clinicians. Neurointerventionalists will predominantly participate in MIPS. MIPS unifies, updates, and streamlines previously existing federal performance programs, thereby reducing onerous redundancies and overall administrative burden, while consolidating performance based payment adjustments. While MIPS may be perceived as a straightforward continuation of fee for service methodology with performance modifiers, MIPS is better viewed as a stepping stone toward eventually adopting alternative payment models in later years. In October 2016, the Centers for Medicare and Medicaid Services (CMS) released a final rule for MACRA implementation, providing greater clarity regarding 2017 requirements. The final rule provides a range of options for easing MIPS reporting requirements in the first performance year. Nonetheless, taking the newly offered 'minimum possible' approach toward meeting the requirements will still have negative consequences for providers. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.
The effect of expedited rotator cuff surgery in injured workers: a case-control study.
Razmjou, Helen; Lincoln, Sandra; Boljanovic, Dragana; Gallay, Stephen; Henry, Patrick; Richards, Robin R; Holtby, Richard
2017-07-01
Expediting rotator cuff surgery is expected to facilitate recovery and return to work in injured workers. This case-control study examined the effect of expedited rotator cuff surgery on recovery and work status in injured workers. Injured workers who had undergone an expedited rotator cuff surgery funded by parallel-pay insurance (study group) were compared with workers who had used the public health insurance (control group) while adjusting for sex, age, severity of pathology, and follow-up period. Disability was measured by the American Shoulder and Elbow Surgeons (ASES) Standardized Assessment Form score. The percentage of patients who exceeded the minimal clinically important difference of 17 points in the ASES was calculated. The study group waited less time to have surgery than the control group (P < .0001), reported less disability after surgery, and had a higher number of patients whose improvement exceeded the minimal clinically important difference (119 vs. 65, P < .0001). The study group was more likely to be working at the time of the final follow-up (P < .0001). The final multivariable regressions, which adjusted for unmatched variables, such as dominant side involvement, mechanism of injury, and associated operations that were different between groups, were consistent with univariable analyses indicating superior results in the study group. Injured workers who underwent expedited rotator cuff surgery reported less disability and had a more successful return to work after surgery than injured workers who waited longer for specialist assessment and surgery within the public health system. Copyright © 2016 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.
Alabbadi, Ibrahim; Crealey, Grainne; Scott, Michael; Baird, Simon; Trouton, Tom; Mairs, Jill; McElnay, James
2006-01-01
System of Objectified Judgement Analysis (SOJA) is a structured approach to the selection of drugs for formulary inclusion. How- ever, while SOJA is a very important advance in drug selection for formulary purposes, it is hospital based and can only be applied to one indication at a time. In SOJA, cost has been given a primary role in the selection process as it has been included as a selection criterion from the start. Cost may therefore drive the selection of a particular drug product at the expense of other basic criteria such as safety or efficacy. The aims of this study were to use a modified SOJA approach in the selection of ACE inhibitors (ACEIs) for use in a joint formulary that bridges primary and secondary care within a health board in Northern Ireland, and to investigate the potential impact of the joint formulary on prescribing costs of ACEIs in that health board. The modified SOJA approach involved four phases in sequence: an evidence-based pharmacotherapeutic evaluation of all available ACEI drug entities, a separate safety/risk assessment analysis of products containing agents that exceeded the pharmacotherapeutic threshold, a budget-impact analysis and, finally, the selection of product lines. A comprehensive literature review and expert panel judgement informed the selection of criteria (and their relative weighting) for the pharmacotherapeutic evaluation. The resultant criteria/scoring system was circulated (in questionnaire format) to prescribers and stakeholders for comment. Based on statistical analysis of the latter survey results, the final scoring system was developed. Drug entities that exceeded the evidence threshold were sequentially entered into the second and third phases of the process. Five drug entities (11 currently available in the UK) exceeded the evidence threshold and 22 of 26 submitted product lines containing these drug entities satisfied the safety/risk assessment criteria. Three product lines, each containing a different drug entity, were selected for formulary inclusion after budget impact analysis was performed. The estimated potential annual cost savings for ACEIs (based on estimated annual usage in defined daily doses) for this particular health board was 42%. The modified SOJA approach has a significant contribution to make in containing the costs of ACEIs. Applying modified SOJA as a practical method for all indications will allow the development of a unified formulary that bridges secondary and primary care.
NASA Technical Reports Server (NTRS)
Centrella, Joan M.
2010-01-01
The final merger of two massive black holes produces a powerful burst of gravitational radiation, emitting more energy than all the stars in the observable universe combined. The resulting gravitational waveforms will be easily detectable by the space-based LISA out to redshifts z greater than 10, revealing the masses and spins of the black holes to high precision. If the merging black holes have unequal masses, or asymmetric spins, the final black hole that forms can recoil with a velocity exceeding 1000 km/s. And, when the black holes merge in the presence of gas and magnetic fields, various types of electromagnetic signals may also be produced. For more than 30 years, scientists have tried to compute black hole mergers using the methods of numerical relativity. The resulting computer codes have been plagued by instabilities, causing them to crash well before the black holes in the binary could complete even a single orbit. Within the past few years, however, this situation has changed dramatically, with a series of remarkable breakthroughs. This talk will focus on new results that are revealing the dynamics and waveforms of binary black hole mergers, recoil velocities, and the possibility of accompanying electromagnetic outbursts.
Crowley Alden A-4 oil skimmer operational test report. Final report, 1 May-30 June 1986
DOE Office of Scientific and Technical Information (OSTI.GOV)
Borst, M.
1986-10-01
The Environmental Protection Agency (EPA) tested the Crowley Alden A-4 Oil Skimming System at its Oil and Hazardous Simulated Environmental Test Tank (OHMSETT) facility in Leonardo, N.J. This testing was sponsored by the Naval Civil Engineering Laboratory (NCEL). The tests were required as part of a Navy purchase to assure that the product met or exceeded specifications in an RFP issued in 1985. During these tests the skimmer recovered 2 to 3 gallons per minute (gpm) (7.5 to 11.4 liters per minute (1pm) ) of oil. There was little or no variation in oil recovery rate introduced by altering testmore » conditions. In calm water, the skimmer recovery efficiency was minimally 85 to 95 %. Under wave conditions, the recovery efficiency was 65 to 75 %. The test program included measurement of the maximum pump rate of an ancillary double diaphragm pump. The greatest pump rate that should be expected is 70 to 80 18pm (18 to 21gpm). Lower capacities were measured with added head, but the pump performed equally well with DFM as with water. Overall, the skimmer met or exceeded the performance characteristics required for inner harbor use.« less
Testing and Analytical Modeling for Purging Process of a Cryogenic Line
NASA Technical Reports Server (NTRS)
Hedayat, A.; Mazurkivich, P. V.; Nelson, M. A.; Majumdar, A. K.
2013-01-01
The purging operations for cryogenic main propulsion systems of upper stage are usually carried out for the following cases: 1) Purging of the Fill/Drain line after completion of propellant loading. This operation allows the removal of residual propellant mass; and 2) Purging of the Feed/Drain line if the mission is scrubbed. The lines would be purged by connections to a ground high-pressure gas storage source. The flowrate of purge gas should be regulated such that the pressure in the line will not exceed the required maximum allowable value. Exceeding the maximum allowable pressure may lead to structural damage in the line. To gain confidence in analytical models of the purge process, a test series was conducted. The test article, a 20-cm incline line, was filled with liquid hydrogen and then purged with gaseous helium (GHe). The influences of GHe flowrates and initial temperatures were evaluated. The Generalized Fluid System Simulation Program, an in-house general-purpose computer program for flow network analysis, was utilized to model and simulate the testing. The test procedures, modeling descriptions, and the results will be presented in the final paper.
Testing and Analytical Modeling for Purging Process of a Cryogenic Line
NASA Technical Reports Server (NTRS)
Hedayat, A.; Mazurkivich, P. V.; Nelson, M. A.; Majumdar, A. K.
2015-01-01
The purging operations for cryogenic main propulsion systems of upper stage are usually carried out for the following cases: 1) Purging of the Fill/Drain line after completion of propellant loading. This operation allows the removal of residual propellant mass; and 2) Purging of the Feed/Drain line if the mission is scrubbed. The lines would be purged by connections to a ground high-pressure gas storage source. The flow-rate of purge gas should be regulated such that the pressure in the line will not exceed the required maximum allowable value. Exceeding the maximum allowable pressure may lead to structural damage in the line. To gain confidence in analytical models of the purge process, a test series was conducted. The test article, a 20-cm incline line, was filled with liquid hydrogen and then purged with gaseous helium (GHe). The influences of GHe flow-rates and initial temperatures were evaluated. The Generalized Fluid System Simulation Program, an in-house general-purpose computer program for flow network analysis, was utilized to model and simulate the testing. The test procedures, modeling descriptions, and the results will be presented in the final paper.
High carbon monoxide levels measured in enclosed skating rinks
DOE Office of Scientific and Technical Information (OSTI.GOV)
Spengler, J.D.; Stone, K.R.; Lilley, F.W.
Carbon monoxide (CO) levels were measured in enclosed skating rinks in the Boston area. The 1 hr National Ambient Air Quality Standard of 35 ppm was exceeded in 82% of the sampled hours. In a separate study, alveolar breath samples were taken of 12 Harvard hockey players, indicating a fivefold increase in carboxyhemoglobin levels after 93 min of exercise in air with a relatively low 25 ppm CO concentration. This paper demonstrates that exercising athletes are incurring physiologically dangerous levels of carboxyhemoglobin when performing in legal ambient air concentrations of CO-25 ppm, and concentrations of the poisonous gas in manymore » indoor skating rinks regularly exceed the national ambient standards by as much as 300%. It is suggested that the Clean Air Act should be amended to include indoor public exposure to at least the criteria pollutants of carbon monoxide, sulfur dioxide, nitrogen dioxide, and suspended particulates. The U.S. Environmental Protection Agency should require revisions in State Implementation Plans to ensure state responsibility for public air pollution exposures indoors. Finally, it is suggested that rink maintenance machinery be redesigned to reduce noxious output by shifting to electrical motors, by upgrading pollution control equipment, or by routine use of ventilation equipment.« less
Tube pumices as strain markers of the ductile-brittle transition during magma fragmentation
NASA Astrophysics Data System (ADS)
Martí, J.; Soriano, C.; Dingwell, D. B.
1999-12-01
Magma fragmentation-the process by which relatively slow-moving magma transforms into a violent gas flow carrying fragments of magma-is the defining feature of explosive volcanism. Yet of all the processes involved in explosively erupting systems, fragmentation is possibly the least understood. Several theoretical and laboratory studies on magma degassing and fragmentation have produced a general picture of the sequence of events leading to the fragmentation of silicic magma. But there remains a debate over whether magma fragmentation is a consequence of the textural evolution of magma to a foamed state where disintegration of walls separating bubbles becomes inevitable due to a foam-collapse criterion, or whether magma is fragmented purely by stresses that exceed its tensile strength. Here we show that tube pumice-where extreme bubble elongation is observed-is a well-preserved magmatic `strain marker' of the stress state immediately before and during fragmentation. Structural elements in the pumice record the evolution of the magma's mechanical response from viscous behaviour (foaming and foam elongation) through the plastic or viscoelastic stage, and finally to brittle behaviour. These observations directly support the hypothesis that fragmentation occurs when magma undergoes a ductile-brittle transition and stresses exceed the magma's tensile strength.
Scheduling in the Face of Uncertain Resource Consumption and Utility
NASA Technical Reports Server (NTRS)
Koga, Dennis (Technical Monitor); Frank, Jeremy; Dearden, Richard
2003-01-01
We discuss the problem of scheduling tasks that consume a resource with known capacity and where the tasks have varying utility. We consider problems in which the resource consumption and utility of each activity is described by probability distributions. In these circumstances, we would like to find schedules that exceed a lower bound on the expected utility when executed. We first show that while some of these problems are NP-complete, others are only NP-Hard. We then describe various heuristic search algorithms to solve these problems and their drawbacks. Finally, we present empirical results that characterize the behavior of these heuristics over a variety of problem classes.
Aerospace Vehicle Design, Spacecraft Section. Final Project Reports. Volume 2; Project Groups 6-8
NASA Technical Reports Server (NTRS)
1989-01-01
Three groups of student engineers in an aerospace vehicle design course present their designs for a vehicle that can be used to resupply the Space Station Freedam and provide emergency crew return to earth capability. The vehicle's requirements include a lifetime that exceeds six years, low cost, the capability for withstanding pressurization, launch, orbit, and reentry hazards, and reliability. The vehicle's subsystems are structures, communication and command data systems, attitude and articulation control, life support and crew systems, power and propulsion, reentry and recovery systems, and mission management, planning, and costing. Special attention is given to spacecraft communications.
Spectral contents readout of birefringent sensor
NASA Technical Reports Server (NTRS)
Redner, Alex S.
1989-01-01
The technical objective of this research program was to develop a birefringent sensor, capable of measuring strain/stress up to 2000 F and a readout system based on Spectral Contents analysis. As a result of the research work, a data acquisition system was developed, capable of measuring strain birefringence in a sensor at 2000 F, with multi-point static and dynamic capabilities. The system uses a dedicated spectral analyzer for evaluation of stress-birefringence and a PC-based readout. Several sensor methods were evaluated. Fused silica was found most satisfactory. In the final evaluation, measurements were performed up to 2000 F and the system performance exceeded expectations.
Final Environmental Impact Statement for Langley
NASA Technical Reports Server (NTRS)
1971-01-01
The Langley Research Center is described, together with the nature of its activities, from which it can be seen that the Center is basically not a major pollution source. Geographical, geological, and climatic charateristics of the site are also described. inasmuch as they influence both the choice of disposal methods and the environmental effects of the pollutants. The known or probable pollution sources at the Center are described. Where the intensities of these sources might exceed the recommended guide-lines, the corrective actions that have been taken or are being taken are described. The entire inventory of pollution sources and control methods is summarized in an appendix.
Pancreatic Extraskeletal Osteosarcoma Metastasizing to the Scalp.
Kim, Young Jae; Kim, Hak Tae; Won, Chong Hyun; Chang, Sung Eun; Lee, Mi Woo; Choi, Jee Ho; Lee, Woo Jin
2018-06-01
Extraskeletal osteosarcoma (ESOS) is a rare mesenchymal soft-tissue neoplasm that accounts for approximately 1% of all soft-tissue sarcomas. Over 70% of these malignant tumor progress to local recurrence and metastasis. It commonly metastasizes to the lungs, lymph nodes, bone, and skin and has a poor survival outcome. Cutaneous metastasis is exceedingly rare and known to be a sign of widespread metastases. We present a 57-year-old woman who presented with a rapidly growing protuberant mass on the scalp that was finally diagnosed as metastatic ESOS from a primary pancreatic ESOS. To our knowledge, there has been no reported case of pancreatic ESOS metastasizing to the scalp.
Millennial Students' Preferred Methods for Learning Concepts in Psychiatric Nursing.
Garwood, Janet K
2015-09-01
The current longitudinal, descriptive, and correlational study explored which traditional teaching strategies can engage Millennial students and adequately prepare them for the ultimate test of nursing competence: the National Council Licensure Examination. The study comprised a convenience sample of 40 baccalaureate nursing students enrolled in a psychiatric nursing course. The students were exposed to a variety of traditional (e.g., PowerPoint(®)-guided lectures) and nontraditional (e.g., concept maps, group activities) teaching and learning strategies, and rated their effectiveness. The students' scores on the final examination demonstrated that student learning outcomes met or exceeded national benchmarks. Copyright 2015, SLACK Incorporated.
Generation of High Brightness X-rays with the PLEIADES Thomson X-ray Source
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brown, W J; Anderson, S G; Barty, C P J
2003-05-28
The use of short laser pulses to generate high peak intensity, ultra-short x-ray pulses enables exciting new experimental capabilities, such as femtosecond pump-probe experiments used to temporally resolve material structural dynamics on atomic time scales. PLEIADES (Picosecond Laser Electron InterAction for Dynamic Evaluation of Structures) is a next generation Thomson scattering x-ray source being developed at Lawrence Livermore National Laboratory (LLNL). Ultra-fast picosecond x-rays (10-200 keV) are generated by colliding an energetic electron beam (20-100 MeV) with a high intensity, sub-ps, 800 nm laser pulse. The peak brightness of the source is expected to exceed 10{sup 20} photons/s/0.1% bandwidth/mm2/mrad2. Simulationsmore » of the electron beam production, transport, and final focus are presented. Electron beam measurements, including emittance and final focus spot size are also presented and compared to simulation results. Measurements of x-ray production are also reported and compared to theoretical calculations.« less
Analysis of Fat Intake Based on the US Department of ...
EPA released the final report, Analysis of Fat Intake Based on USDA’s 1994-1996, 1998 Continuing Survey of Food Intakes by Individuals (CSFII, Final Report). For this report, the EPA conducted an analysis of fat consumption across the U.S. population based on data derived from the U.S. Department of Agriculture's 1994-96, 1998 Continuing Survey of Food Intakes by Individuals (CSFII) and EPA's Food Commodity Intake Database (FCID). Percentiles of fat consumption were calculated on the basis of total mass and on a per-unit body-weight basis for 12 food categories and 98 demographic cohorts. In addition, dietary breakdown and fat intake percentiles were calculated for a subset of the sample population whose consumption of animal fats exceeded the 90th percentile within its age group. Many chemicals found in the environment tend to accumulate in fatty tissue. Assessing risks from these chemicals requires knowledge of dietary habits and the amount of fat present in various types of foods.
DOE Office of Scientific and Technical Information (OSTI.GOV)
FULLER, R.K.
1999-02-23
This document is the final report for tank 241-AP-106 grab samples. Three grab samples 6AP-98-1, 6AP-98-2 and 6AP-98-3 were taken from riser 1 of tank 241-AP-106 on May 28, 1998 and received by the 222-S Laboratory on May 28, 1998. Analyses were performed in accordance with the ''Compatability Grab Sampling and Analysis Plan'' (TSAP) (Sasaki, 1998) and the ''Data Quality Objectives for Tank Farms Waste Compatability Program (DQO). The analytical results are presented in the data summary report. No notification limits were exceeded. The request for sample analysis received for AP-106 indicated that the samples were polychlorinated biphenyl (PCB) suspects.more » The results of this analysis indicated that no PCBs were present at the Toxic Substance Control Act (TSCA) regulated limit of 50 ppm. The results and raw data for the PCB analysis are included in this document.« less
Xylose fermentation to ethanol. A review
DOE Office of Scientific and Technical Information (OSTI.GOV)
McMillan, J D
1993-01-01
The past several years have seen tremendous progress in the understanding of xylose metabolism and in the identification, characterization, and development of strains with improved xylose fermentation characteristics. A survey of the numerous microorganisms capable of directly fermenting xylose to ethanol indicates that wild-type yeast and recombinant bacteria offer the best overall performance in terms of high yield, final ethanol concentration, and volumetric productivity. The best performing bacteria, yeast, and fungi can achieve yields greater than 0.4 g/g and final ethanol concentrations approaching 5%. Productivities remain low for most yeast and particularly for fungi, but volumetric productivities exceeding 1.0 g/L-hmore » have been reported for xylose-fermenting bacteria. In terms of wild-type microorganisms, strains of the yeast Pichia stipitis show the most promise in the short term for direct high-yield fermentation of xylose without byproduct formation. Of the recombinant xylose-fermenting microorganisms developed, recombinant E. coli ATTC 11303 (pLOI297) exhibits the most favorable performance characteristics reported to date.« less
Xylose fermentation to ethanol
DOE Office of Scientific and Technical Information (OSTI.GOV)
McMillan, J.D.
1993-01-01
The past several years have seen tremendous progress in the understanding of xylose metabolism and in the identification, characterization, and development of strains with improved xylose fermentation characteristics. A survey of the numerous microorganisms capable of directly fermenting xylose to ethanol indicates that wild-type yeast and recombinant bacteria offer the best overall performance in terms of high yield, final ethanol concentration, and volumetric productivity. The best performing bacteria, yeast, and fungi can achieve yields greater than 0.4 g/g and final ethanol concentrations approaching 5%. Productivities remain low for most yeast and particularly for fungi, but volumetric productivities exceeding 1.0 g/L-hmore » have been reported for xylose-fermenting bacteria. In terms of wild-type microorganisms, strains of the yeast Pichia stipitis show the most promise in the short term for direct high-yield fermentation of xylose without byproduct formation. Of the recombinant xylose-fermenting microorganisms developed, recombinant E. coli ATTC 11303 (pLOI297) exhibits the most favorable performance characteristics reported to date.« less
2015-04-30
Today, the MESSENGER spacecraft sent its final image. Originally planned to orbit Mercury for one year, the mission exceeded all expectations, lasting for over four years and acquiring extensive datasets with its seven scientific instruments and radio science investigation. This afternoon, the spacecraft succumbed to the pull of solar gravity and impacted Mercury's surface. The image shown here is the last one acquired and transmitted back to Earth by the mission. The image is located within the floor of the 93-kilometer-diameter crater Jokai. The spacecraft struck the planet just north of Shakespeare basin. Date acquired: April 30, 2015 Image Mission Elapsed Time (MET): 72716050 Image ID: 8422953 Instrument: Narrow Angle Camera (NAC) of the Mercury Dual Imaging System (MDIS) Center Latitude: 72.0° Center Longitude: 223.8° E Resolution: 2.1 meters/pixel Scale: This image is about 1 kilometers (0.6 miles) across Incidence Angle: 57.9° Emission Angle: 56.5° Phase Angle: 40.7° http://photojournal.jpl.nasa.gov/catalog/PIA19448
Mobilization of Trace Metals in an Experimental Carbon Sequestration Scenario
NASA Astrophysics Data System (ADS)
Marcon, V.; Kaszuba, J. P.
2012-12-01
Mobilizing trace metals with injection of supercritical CO2 into deep saline aquifers is a concern for geologic carbon sequestration. The potential for leakage from these systems requires an understanding of how injection reservoirs interact with the overlying potable aquifers. Hydrothermal experiments were performed to evaluate metal mobilization and mechanisms of release in a carbonate storage reservoir and at the caprock-reservoir boundary. Experiments react synthetic Desert Creek limestone and/or Gothic Shale, formations in the Paradox Basin, Utah, with brine that is close to equilibrium with these rocks. A reaction temperature of 1600C accelerates the reaction kinetics without changing in-situ water-rock reactions. The experiments were allowed to reach steady state before injecting CO2. Changes in major and trace element water chemistry, dissolved carbon and sulfide, and pH were tracked throughout the experiments. CO2 injection decreases the pH by 1 to 2 units; concomitant mineral dissolution produces elevated Ba, Cu, Fe, Pb, and Zn concentrations in the brine. Concentrations subsequently decrease to approximately steady state values after 120-330 hours, likely due to mineral precipitation as seen in SEM images and predicted by geochemical modeling. In experiments that emulate the caprock-reservoir boundary, final Fe (0.7ppb), an element of secondary concern for the EPA, and Pb (0.05ppb) concentrations exceed EPA limits, whereas Ba (0.140ppb), Cu (48ppb), and Zn (433ppb) values remain below EPA limits. In experiments that simulate deeper reservoir conditions, away from the caprock boundary, final Fe (3.5ppb) and Pb (0.017ppb) values indicate less mobilization than seen at the caprock-reservoir boundary, but values still exceed EPA limits. Barium concentrations always remain below the EPA limit of 2ppb, but are more readily mobilized in experiments replicating deeper reservoir conditions. In both systems, transition elements Cd, Cr, Cu, Pb and Zn behave in a similar manner, increasing in concentration with injection but continually decreasing after about 830 hours until termination of the experiment. SEM images and geochemical models indicate initial dissolution of all rocks and minerals, re-precipitation of Ca-Mg-Fe carbonates and Fe-sulfides, and precipitation of anhydrite in both systems. Calcite dissolves more readily than dolomite in these experiments, but re-precipitates in veins on dolomite. If brines leak from a storage reservoir and mix with a potable aquifer, the experimental results suggest that Ba, Cu, and Zn will not be contaminants of concern. Pb, Fe and As (still under consideration) initially exceed the EPA threshold and may require careful attention in a sequestration scenario. However, experimentally observed trends of decreasing trace metal concentration suggest that these metals could become less of a concern during the life of a carbon repository. Finally, the caprock plays an active role in trace metal mobilization in the system. The caprock provides a source of metals, although subsequent precipitation may remove metals from solution.
Happich, Michael; Kirson, Noam Y.; Desai, Urvi; King, Sarah; Birnbaum, Howard G.; Reed, Catherine; Belger, Mark; Lenox-Smith, Alan; Price, David
2016-01-01
Background: Prior diagnosis of Alzheimer’s disease (AD) among patients later diagnosed with vascular dementia (VaD) has been associated with excess costs, suggesting potential benefits of earlier rule-out of AD diagnosis. Objective: To investigate whether prior diagnosis with AD among patients with VaD is associated with excess costs in the UK. Methods: Patients with a final VaD diagnosis, continuous data visibility for≥6 months prior to index date, and linkage to Hospital Episode Statistics data were retrospectively selected from de-identified Clinical Practice Research Datalink data. Patients with AD diagnosis before a final VaD diagnosis were matched to similar patients with no prior AD diagnosis using propensity score methods. Annual excess healthcare costs were calculated for 5 years post-index, stratified by time to final diagnosis. Results: Of 9,311 patients with VaD, 508 (6%) had prior AD diagnosis with a median time to VaD diagnosis exceeding 2 years from index date. Over the entire follow-up period, patients with prior AD diagnosis had accumulated healthcare costs that were approximately GBP2,000 higher than those for matched counterparts (mostly due to higher hospitalization costs). Cost differentials peaked particularly in the period including the final VaD diagnosis, with excess costs quickly declining thereafter. Conclusion: Potential misdiagnosis of AD among UK patients with VaD resulted in substantial excess costs. The decline in excess costs following a final VaD diagnosis suggests potential benefits from earlier rule-out of AD. PMID:27163798
Health impacts due to particulate air pollution in Volos City, Greece.
Moustris, Konstantinos P; Proias, George T; Larissi, Ioanna K; Nastos, Panagiotis T; Koukouletsos, Konstantinos V; Paliatsos, Athanasios G
2016-01-01
There is great consensus among the scientific community that suspended particulate matter is considered as one of the most harmful pollutants, particularly the inhalable particulate matter with aerodynamic diameter less than 10 μm (PM10) causing respiratory health problems and heart disorders. Average daily concentrations exceeding established standard values appear, among other cases, to be the main cause of such episodes, especially during Saharan dust episodes, a natural phenomenon that degrades air quality in the urban area of Volos. In this study the AirQ2.2.3 model, developed by the World Health Organization (WHO) European Center for Environment and Health, was used to evaluate adverse health effects by PM10 pollution in the city of Volos during a 5-year period (2007-2011). Volos is a coastal medium size city in the Thessaly region. The city is located on the northern side of the Gulf of Pagassitikos, on the east coast of Central Greece. Air pollution data were obtained by a fully automated monitoring station, which was established by the Municipal Water Supply and Sewage Department in the Greater Area of Volos, located in the centre of the city. The results of the current study indicate that when the mean annual PM10 concentration exceeds the corresponding European Union (EU) threshold value, the number of hospital admissions for respiratory disease (HARD) is increased by 25% on average. There is also an estimated increase of about 2.5% in HARD compared to the expected annual HARD cases for Volos. Finally, a strong correlation was found between the number of days exceeding the EU daily threshold concentration ([PM10] ≥ 50 μg m(-3)) and the annual HARD cases.
Southwestern Power Administration Annual Report 2008
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
2010-12-01
Dear Secretary Chu, I am pleased to present the financial statements and operating data for Southwestern Power Administration (Southwestern) for Fiscal Year (FY) 2008. In FY 2008, Southwestern delivered over 7.3 billion kilowatt-hours of energy to its wholesale customers – nearly 31% more than average due to numerous record rainfall amounts in the southwest region. These record amounts produced revenues which exceeded the average annual revenue requirement by nearly $20 million and resulted in over $200 million in economic benefits to the region. Yet even as Southwestern exceeded its goals of marketing and delivering Federal hydroelectric power to our customers,more » we stayed focused on safety, security, and reliability. For example, we maintained our nearly 1,400 miles of high-voltage transmission lines, substations, and communications sites while achieving a Recordable Accident Frequency Rate of 0.0, a record that reflects Southwestern’s safety achievement of no recordable injuries for every 200,000 hours worked. We kept our rights-of-way secure from vegetation and other obstacles, work that not only supports our mission but also promotes reliability of the regional and National grid. We exceeded all North American Electric Reliability Corporation (NERC) Control Performance Standards (CPS- 1 and CPS-2), and maintained regulation and reserve obligations and reactive reserve margins to ensure the reliability of the bulk electric system, even during extended periods of restricted hydro operations due to unusually high project inflows. Finally, we continued our partnerships with the Department of Energy, the U.S. Army Corps of Engineers, our customers, and other Federal power stakeholders, partnerships that are vital to our continued success in marketing and delivering carbon-free, renewable, and domestically produced energy to our customers and to the Nation. Sincerely, Jon Worthington Administrator« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
KRIEGLER, ELMAR; TAVONI, MASSIMO; ABOUMAHBOUB, TINO
This paper provides a novel and comprehensive model-based assessment of possible outcomes of the Durban Platform negotiations with a focus on emissions reduction requirements, the consistency with the 2°C target and global economic impacts. The Durban Platform scenarios investigated in the LIMITS study — all assuming the implementation of comprehensive global emission reductions after 2020, but assuming different 2020 emission reduction levels as well as different long-term concentration targets — exhibit a probability of exceeding the 2°C limit of 22–41% when reaching 450 (450–480) ppm CO 2e, and 35–59% when reaching 500 (480–520) ppm CO 2e in 2100. Forcing andmore » temperature show a peak and decline pattern for both targets. Consistency of the resulting temperature trajectory with the 2°C target is a societal choice, and may be based on the maximum exceedance probability at the time of the peak and the long run exceedance probability, e.g., in the year 2100. The challenges of implementing a long-term target after a period of fragmented near-term climate policy can be significant as reflected in steep reductions of emissions intensity and transitional and long-term economic impacts. In particular, the challenges of adopting the target are significantly higher in 2030 than in 2020, both in terms of required emissions intensity decline rates and economic impacts. Finally, we conclude that an agreement on comprehensive emissions reductions to be implemented from 2020 onwards has particular significance for meeting long-term climate policy objectives.« less
FPGA-Based X-Ray Detection and Measurement for an X-Ray Polarimeter
NASA Technical Reports Server (NTRS)
Gregory, Kyle; Hill, Joanne; Black, Kevin; Baumgartner, Wayne
2013-01-01
This technology enables detection and measurement of x-rays in an x-ray polarimeter using a field-programmable gate array (FPGA). The technology was developed for the Gravitational and Extreme Magnetism Small Explorer (GEMS) mission. It performs precision energy and timing measurements, as well as rejection of non-x-ray events. It enables the GEMS polarimeter to detect precisely when an event has taken place so that additional measurements can be made. The technology also enables this function to be performed in an FPGA using limited resources so that mass and power can be minimized while reliability for a space application is maximized and precise real-time operation is achieved. This design requires a low-noise, charge-sensitive preamplifier; a highspeed analog to digital converter (ADC); and an x-ray detector with a cathode terminal. It functions by computing a sum of differences for time-samples whose difference exceeds a programmable threshold. A state machine advances through states as a programmable number of consecutive samples exceeds or fails to exceed this threshold. The pulse height is recorded as the accumulated sum. The track length is also measured based on the time from the start to the end of accumulation. For track lengths longer than a certain length, the algorithm estimates the barycenter of charge deposit by comparing the accumulator value at the midpoint to the final accumulator value. The design also employs a number of techniques for rejecting background events. This innovation enables the function to be performed in space where it can operate autonomously with a rapid response time. This implementation combines advantages of computing system-based approaches with those of pure analog approaches. The result is an implementation that is highly reliable, performs in real-time, rejects background events, and consumes minimal power.
Vitolins, Mara Z; Anderson, Andrea M; Delahanty, Linda; Raynor, Hollie; Miller, Gary D; Mobley, Connie; Reeves, Rebecca; Yamamoto, Monica; Champagne, Catherine; Wing, Rena R; Mayer-Davis, Elizabeth
2009-08-01
Little has been reported regarding food and nutrient intake in individuals diagnosed with type 2 diabetes, and most reports have been based on findings in select groups or individuals who self-reported having diabetes. To describe the baseline food and nutrient intake of the Look AHEAD (Action for Health in Diabetes) trial participants, compare participant intake to national guidelines, and describe demographic and health characteristics associated with food group consumption. The Look AHEAD trial is evaluating the effects of a lifestyle intervention (calorie control and increased physical activity for weight loss) compared with diabetes support and education on long-term cardiovascular and other health outcomes. Participants are 45 to 75 years old, overweight or obese (body mass index [BMI] > or = 25), and have type 2 diabetes. In this cross-sectional analysis, baseline food consumption was assessed by food frequency questionnaire from 2,757 participants between September 2000 and December 2003. Descriptive statistics were used to summarize intake by demographic characteristics. Kruskal-Wallis tests assessed univariate effects of characteristics on consumption. Multiple linear regression models assessed factors predictive of intake. Least square estimates were based on final models, and logistic regression determined factors predictive of recommended intake. Ninety-three percent of the participants exceeded the recommended percentage of calories from fat, 85% exceeded the saturated fat recommendation, and 92% consumed too much sodium. Also, fewer than half met the minimum recommended servings of fruit, vegetables, dairy, and grains. These participants with pre-existing diabetes did not meet recommended food and nutrition guidelines. These overweight adults diagnosed with diabetes are exceeding recommended intake of fat, saturated fats, and sodium, which may contribute to increasing their risk of cardiovascular disease and other chronic diseases.
Ground-Water Quality of the Northern High Plains Aquifer, 1997, 2002-04
Stanton, Jennifer S.; Qi, Sharon L.
2007-01-01
An assessment of ground-water quality in the northern High Plains aquifer was completed during 1997 and 2002-04. Ground-water samples were collected at 192 low-capacity, primarily domestic wells in four major hydrogeologic units of the northern High Plains aquifer-Ogallala Formation, Eastern Nebraska, Sand Hills, and Platte River Valley. Each well was sampled once, and water samples were analyzed for physical properties and concentrations of nitrogen and phosphorus compounds, pesticides and pesticide degradates, dissolved solids, major ions, trace elements, dissolved organic carbon (DOC), radon, and volatile organic compounds (VOCs). Tritium and microbiology were analyzed at selected sites. The results of this assessment were used to determine the current water-quality conditions in this subregion of the High Plains aquifer and to relate ground-water quality to natural and human factors affecting water quality. Water-quality analyses indicated that water samples rarely exceeded established U.S. Environmental Protection Agency public drinking-water standards for those constituents sampled; 13 of the constituents measured or analyzed exceeded their respective standards in at least one sample. The constituents that most often failed to meet drinking-water standards were dissolved solids (13 percent of samples exceeded the U.S. Environmental Protection Agency Secondary Drinking-Water Regulation) and arsenic (8 percent of samples exceeded the U.S. Environmental Protection Agency Maximum Contaminant Level). Nitrate, uranium, iron, and manganese concentrations were larger than drinking-water standards in 6 percent of the samples. Ground-water chemistry varied among hydrogeologic units. Wells sampled in the Platte River Valley and Eastern Nebraska units exceeded water-quality standards more often than the Ogallala Formation and Sand Hills units. Thirty-one percent of the samples collected in the Platte River Valley unit had nitrate concentrations greater than the standard, 22 percent exceeded the manganese standard, 19 percent exceeded the sulfate standard, 26 percent exceeded the uranium standard, and 38 percent exceeded the dissolved-solids standard. In addition, 78 percent of samples had at least one detectable pesticide and 22 percent of samples had at least one detectable VOC. In the Eastern Nebraska unit, 30 percent of the samples collected had dissolved-solids concentrations larger than the standard, 23 percent exceeded the iron standard, 13 percent exceeded the manganese standard, 10 percent exceeded the arsenic standard, 7 percent exceeded the sulfate standard, 7 percent exceeded the uranium standard, and 7 percent exceeded the selenium standard. No samples exceeded the nitrate standard. Thirty percent of samples had at least one detectable pesticide compound and 10 percent of samples had at least one detectable VOC. In contrast, the Sand Hills and Ogallala Formation units had fewer detections of anthropogenic compounds and drinking-water exceedances. In the Sand Hills unit, 15 percent of the samples exceeded the arsenic standard, 4 percent exceeded the nitrate standard, 4 percent exceeded the uranium standard, 4 percent exceeded the iron standard, and 4 percent exceeded the dissolved-solids standard. Fifteen percent of samples had at least one pesticide compound detected and 4 percent had at least one VOC detected. In the Ogallala Formation unit, 6 percent of water samples exceeded the arsenic standard, 4 percent exceeded the dissolved-solids standard, 3 percent exceeded the nitrate standard, 2 percent exceeded the manganese standard, 1 percent exceeded the iron standard, 1 percent exceeded the sulfate standard, and 1 percent exceeded the uranium standard. Eight percent of samples collected in the Ogallala Formation unit had at least one pesticide detected and 6 percent had at least one VOC detected. Differences in ground-water chemistry among the hydrogeologic units were attributed to variable depth to water, depth of the well screen below the water table, reduction-oxidation conditions, ground-water residence time, interactions with surface water, composition of aquifer sediments, extent of cropland, extent of irrigated land, and fertilizer application rates.
Dinosaurs in decline tens of millions of years before their final extinction
Sakamoto, Manabu; Benton, Michael J.; Venditti, Chris
2016-01-01
Whether dinosaurs were in a long-term decline or whether they were reigning strong right up to their final disappearance at the Cretaceous–Paleogene (K-Pg) mass extinction event 66 Mya has been debated for decades with no clear resolution. The dispute has continued unresolved because of a lack of statistical rigor and appropriate evolutionary framework. Here, for the first time to our knowledge, we apply a Bayesian phylogenetic approach to model the evolutionary dynamics of speciation and extinction through time in Mesozoic dinosaurs, properly taking account of previously ignored statistical violations. We find overwhelming support for a long-term decline across all dinosaurs and within all three dinosaurian subclades (Ornithischia, Sauropodomorpha, and Theropoda), where speciation rate slowed down through time and was ultimately exceeded by extinction rate tens of millions of years before the K-Pg boundary. The only exceptions to this general pattern are the morphologically specialized herbivores, the Hadrosauriformes and Ceratopsidae, which show rapid species proliferations throughout the Late Cretaceous instead. Our results highlight that, despite some heterogeneity in speciation dynamics, dinosaurs showed a marked reduction in their ability to replace extinct species with new ones, making them vulnerable to extinction and unable to respond quickly to and recover from the final catastrophic event. PMID:27092007
Dinosaurs in decline tens of millions of years before their final extinction.
Sakamoto, Manabu; Benton, Michael J; Venditti, Chris
2016-05-03
Whether dinosaurs were in a long-term decline or whether they were reigning strong right up to their final disappearance at the Cretaceous-Paleogene (K-Pg) mass extinction event 66 Mya has been debated for decades with no clear resolution. The dispute has continued unresolved because of a lack of statistical rigor and appropriate evolutionary framework. Here, for the first time to our knowledge, we apply a Bayesian phylogenetic approach to model the evolutionary dynamics of speciation and extinction through time in Mesozoic dinosaurs, properly taking account of previously ignored statistical violations. We find overwhelming support for a long-term decline across all dinosaurs and within all three dinosaurian subclades (Ornithischia, Sauropodomorpha, and Theropoda), where speciation rate slowed down through time and was ultimately exceeded by extinction rate tens of millions of years before the K-Pg boundary. The only exceptions to this general pattern are the morphologically specialized herbivores, the Hadrosauriformes and Ceratopsidae, which show rapid species proliferations throughout the Late Cretaceous instead. Our results highlight that, despite some heterogeneity in speciation dynamics, dinosaurs showed a marked reduction in their ability to replace extinct species with new ones, making them vulnerable to extinction and unable to respond quickly to and recover from the final catastrophic event.
Does the choice of nucleotide substitution models matter topologically?
Hoff, Michael; Orf, Stefan; Riehm, Benedikt; Darriba, Diego; Stamatakis, Alexandros
2016-03-24
In the context of a master level programming practical at the computer science department of the Karlsruhe Institute of Technology, we developed and make available an open-source code for testing all 203 possible nucleotide substitution models in the Maximum Likelihood (ML) setting under the common Akaike, corrected Akaike, and Bayesian information criteria. We address the question if model selection matters topologically, that is, if conducting ML inferences under the optimal, instead of a standard General Time Reversible model, yields different tree topologies. We also assess, to which degree models selected and trees inferred under the three standard criteria (AIC, AICc, BIC) differ. Finally, we assess if the definition of the sample size (#sites versus #sites × #taxa) yields different models and, as a consequence, different tree topologies. We find that, all three factors (by order of impact: nucleotide model selection, information criterion used, sample size definition) can yield topologically substantially different final tree topologies (topological difference exceeding 10 %) for approximately 5 % of the tree inferences conducted on the 39 empirical datasets used in our study. We find that, using the best-fit nucleotide substitution model may change the final ML tree topology compared to an inference under a default GTR model. The effect is less pronounced when comparing distinct information criteria. Nonetheless, in some cases we did obtain substantial topological differences.
Dinosaurs in decline tens of millions of years before their final extinction
NASA Astrophysics Data System (ADS)
Sakamoto, Manabu; Benton, Michael J.
2016-05-01
Whether dinosaurs were in a long-term decline or whether they were reigning strong right up to their final disappearance at the Cretaceous-Paleogene (K-Pg) mass extinction event 66 Mya has been debated for decades with no clear resolution. The dispute has continued unresolved because of a lack of statistical rigor and appropriate evolutionary framework. Here, for the first time to our knowledge, we apply a Bayesian phylogenetic approach to model the evolutionary dynamics of speciation and extinction through time in Mesozoic dinosaurs, properly taking account of previously ignored statistical violations. We find overwhelming support for a long-term decline across all dinosaurs and within all three dinosaurian subclades (Ornithischia, Sauropodomorpha, and Theropoda), where speciation rate slowed down through time and was ultimately exceeded by extinction rate tens of millions of years before the K-Pg boundary. The only exceptions to this general pattern are the morphologically specialized herbivores, the Hadrosauriformes and Ceratopsidae, which show rapid species proliferations throughout the Late Cretaceous instead. Our results highlight that, despite some heterogeneity in speciation dynamics, dinosaurs showed a marked reduction in their ability to replace extinct species with new ones, making them vulnerable to extinction and unable to respond quickly to and recover from the final catastrophic event.
NASA Astrophysics Data System (ADS)
Centrella, Joan
2010-03-01
The final merger of two massive black holes produces a powerful burst of gravitational radiation, emitting more energy than all the stars in the observable universe combined. The resulting gravitational waveforms will be easily detectable by the space-based LISA out to redshifts z > 10, revealing the masses and spins of the black holes to high precision. If the merging black holes have unequal masses, or asymmetric spins, the final black hole that forms can recoil with a velocity exceeding 1000 km/s. And, when the black holes merge in the presence of gas and magnetic fields, various types of electromagnetic signals may also be produced. For more than 30 years, scientists have tried to compute black hole mergers using the methods of numerical relativity. The resulting computer codes have been plagued by instabilities, causing them to crash well before the black holes in the binary could complete even a single orbit. Within the past few years, however, this situation has changed dramatically, with a series of remarkable breakthroughs. This talk will focus on new results that are revealing the dynamics and waveforms of binary black hole mergers, recoil velocities, and the possibility of accompanying electromagnetic outbursts. This research is supported in part by NASA grant 06-BEFS06-19 to Goddard Space Flight Center.
1986-04-01
In this final rule we are adopting an apportionment methodology for determining reasonable cost reimbursement for hospital malpractice insurance costs. The new apportionment policy for hospitals will divide total malpractice insurance premium cost into two components. The "administrative component," which accounts for 8.5 percent of total premium cost, will be included in the General and Administrative cost center and will be apportioned on the basis of the individual hospital's Medicare utilization rate. The "risk component," which comprises 91.5 percent of total cost, will be apportioned on the basis of a formula that takes into account the individual hospital's utilization as well as the national Medicare patient utilization rate and the national Medicare malpractice loss ratio (as adjusted to account for associated claims handling costs). Effectively, the "scaling factor formula" will relate the national utilization rate to the adjusted national loss ratio. As a hospital's own utilization rate exceeds or falls below the national utilization rate, the risk component will be reimbursed on the basis of a "scaling factor" that is more or less than the national Medicare malpractice loss ratio. Different apportionment policies are being adopted for Medicare skilled nursing facilities and for providers of services under the Medicaid and Maternal and Child Health programs. This final rule replaces our current apportionment policy for reimbursement of malpractice insurance costs and is applicable, subject to the rules of reopening and administrative finality, to cost reporting periods beginning on or after July 1, 1979.
Tank 241-U-103, grab samples 3U-99-1, 3u-99-2 and 3U-99-3
DOE Office of Scientific and Technical Information (OSTI.GOV)
STEEN, F.H.
This document is the final report for tank 241-U-103 grab samples. Three grab samples were collected from riser 13 on March 12, 1999 and received by the 222-S laboratory on March 15, 1999. Analyses were performed in accordance with the Compatibility Grab Sampling and Analysis Plan for Fiscal year 1999 (TSAP) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO). The analytical results are presented in the data summary report. None of the subsamples submitted for differential scanning calorimetry (DSC), total organic carbon (TOC) and plutonium 239 (Pu239) analyses exceeded the notification limits as stated in TSAP.
Rationale for evaluating a closed food chain for space habitats
NASA Technical Reports Server (NTRS)
Modell, M.; Spurlock, J. M.
1980-01-01
Closed food cycles for long duration space flight and space habitation are examined. Wash water for a crew of six is economically recyclable after a week, while a total closed loop water system is effective only if the stay exceeds six months' length. The stoichiometry of net plant growth is calculated and it is shown that the return of urine, feces, and inedible plant parts to the food chain, along with the addition of photosynthesis, closes the food chain loop. Scenarios are presented to explore the technical feasibility of achieving a closed loop system. An optimal choice of plants is followed by processing, waste conversion, equipment specifications, and control requirements, and finally, cost-effectiveness.
1977-06-14
onIis oft’ h Ie ’I IS.J1 I aif the minori ty imanpower tit i I ia i lon’ ia t ot, hle font r~ic ta’ rec s or exceeds its commitmenC~t to thle goalIs for...Treated Piles V-3 5-12. Quality Control V-3 5-13. Payment for Weir Warning Markers V-4 5-14. Pulled Piles V-4 w w w w w w ". .... • _ ° .. i...indicated on the driving plan shall be no more than 6 inches for each pile. Excessive bending of piles to pull them into final position will not be
Mirzazadeh, Roghieh; Khatami, Shohreh; Bayat, Parastoo; Zamani, Zahra; Sadeghi, Sedigheh; Roohi, Soghra; Saidi, Parinaz
2005-01-01
The diagnosis of the different forms of thalassemia is one of the important applications of analysis of globin chains. These analyses are done by high performance liquid chromatography (HPLC) using a MONO-S cation exchange column and ether is used for washing the globin powder in the final step. The presence of peroxide impurities in ether could change the structure of the globin chains. In the chromatograms, these modified globins appear as separated peaks next to the unmodified globin peaks. In these cases, the alpha/beta ratio exceed by artifact the correct value. Our study demonstrates that diagnostic centers should ensure that the ether they use is pure.
Broadband MAS NMR spectroscopy in the low-power limit
NASA Astrophysics Data System (ADS)
Sanders, Kevin J.; Pell, Andrew J.; Wegner, Sebastian; Grey, Clare P.; Pintacuda, Guido
2018-04-01
We investigate the performance of broadband adiabatic inversion pulses in the high-power (short high-powered adiabatic pulse, SHAP) and low-power (single-sideband-selective adiabatic pulse, S3AP) RF regimes on a spin system subjected to large anisotropic interactions. We show by combined experimental results and spin dynamics simulations that when the magic-angle spinning rate exceeds 100 kHz S3APs begin outperforming SHAPs. This is especially true for low-gamma nuclei, such as 6 Li in paramagnetic Li-ion battery materials. Finally, we show how S3APs can be improved by combining multiple waveforms sweeping over multiple sidebands simultaneously, in order to produce inverted sideband profiles free from intensity biasing.
Post Irradiation Examination for Advanced Materials at Burnups Exceeding the Current Limit
DOE Office of Scientific and Technical Information (OSTI.GOV)
John H. Strumpell
2004-12-31
Permitting fuel to be irradiated to higher burnups limits can reduce the amount of spent nuclear fuel (SNF) requiring storage and/or disposal and enable plants to operate with longer more economical cycle lengths and/or at higher power levels. Therefore, Framatome ANP (FANP) and the B&W Owner's Group (BWOG) have introduced a new fuel rod design with an advanced M5 cladding material and have irradiated several test fuel rods through four cycles. The U.S. Department of Energy (DOE) joined FANP and the BWOG in supporting this project during its final phase of collecting and evaluating high burnup data through post irradiationmore » examination (PIE).« less
Cho, Jae Heon; Lee, Jong Ho
2015-11-01
Manual calibration is common in rainfall-runoff model applications. However, rainfall-runoff models include several complicated parameters; thus, significant time and effort are required to manually calibrate the parameters individually and repeatedly. Automatic calibration has relative merit regarding time efficiency and objectivity but shortcomings regarding understanding indigenous processes in the basin. In this study, a watershed model calibration framework was developed using an influence coefficient algorithm and genetic algorithm (WMCIG) to automatically calibrate the distributed models. The optimization problem used to minimize the sum of squares of the normalized residuals of the observed and predicted values was solved using a genetic algorithm (GA). The final model parameters were determined from the iteration with the smallest sum of squares of the normalized residuals of all iterations. The WMCIG was applied to a Gomakwoncheon watershed located in an area that presents a total maximum daily load (TMDL) in Korea. The proportion of urbanized area in this watershed is low, and the diffuse pollution loads of nutrients such as phosphorus are greater than the point-source pollution loads because of the concentration of rainfall that occurs during the summer. The pollution discharges from the watershed were estimated for each land-use type, and the seasonal variations of the pollution loads were analyzed. Consecutive flow measurement gauges have not been installed in this area, and it is difficult to survey the flow and water quality in this area during the frequent heavy rainfall that occurs during the wet season. The Hydrological Simulation Program-Fortran (HSPF) model was used to calculate the runoff flow and water quality in this basin. Using the water quality results, a load duration curve was constructed for the basin, the exceedance frequency of the water quality standard was calculated for each hydrologic condition class, and the percent reduction required to achieve the water quality standard was estimated. The R(2) value for the calibrated BOD5 was 0.60, which is a moderate result, and the R(2) value for the TP was 0.86, which is a good result. The percent differences obtained for the calibrated BOD5 and TP were very good; therefore, the calibration results using WMCIG were satisfactory. From the load duration curve analysis, the WQS exceedance frequencies of the BOD5 under dry conditions and low-flow conditions were 75.7% and 65%, respectively, and the exceedance frequencies under moist and mid-range conditions were higher than under other conditions. The exceedance frequencies of the TP for the high-flow, moist and mid-range conditions were high and the exceedance rate for the high-flow condition was particularly high. Most of the data from the high-flow conditions exceeded the WQSs. Thus, nonpoint-source pollutants from storm-water runoff substantially affected the TP concentration in the Gomakwoncheon. Copyright © 2015 Elsevier Ltd. All rights reserved.
Heat extraction and refrigeration (HEAR) system. Phase I final progress report. [Restaurant kitchens
DOE Office of Scientific and Technical Information (OSTI.GOV)
Venable, B.M.
1983-01-01
Testing indicates that heat energy available to be recaptured grossly exceeds the capacity of the 1.5 ton medium temperature Freon 12 compressor being utilized. The unit produced 50 pounds of suction pressure with the damper (Figure 4) open and exceeded compressor operational limits with the damper closed. This indicates that the current compressor could be replaced by one of 5 ton capacity since current estimates indicate that 60,000 Btu's are available for recovery. This could be divided between space heating and water heating as required by using separate condensers. There were no real surprises in the feasibility model construction andmore » test phase, and the validity of the assumptions made in the original project description have been established. That is, it has been demonstrated that it is feasible to extract heat from the kitchen exhaust duct in a restaurant and keep the heat pump evaporator clean. It is concluded that work done under this $10,000 grant demonstrated the technical feasibility of the HEAR System. However, additional funding (our original proposal called for a $47,000 grant) would be required to economically evaluate the benefit realized and to advance the HEAR System design to a workable prototype stage.« less
Interferometric constraints on quantum geometrical shear noise correlations
Chou, Aaron; Glass, Henry; Richard Gustafson, H.; ...
2017-07-20
Final measurements and analysis are reported from the first-generation Holometer, the first instrument capable of measuring correlated variations in space-time position at strain noise power spectral densities smaller than a Planck time. The apparatus consists of two co-located, but independent and isolated, 40 m power-recycled Michelson interferometers, whose outputs are cross-correlated to 25 MHz. The data are sensitive to correlations of differential position across the apparatus over a broad band of frequencies up to and exceeding the inverse light crossing time, 7.6 MHz. By measuring with Planck precision the correlation of position variations at spacelike separations, the Holometer searches formore » faint, irreducible correlated position noise backgrounds predicted by some models of quantum space-time geometry. The first-generation optical layout is sensitive to quantum geometrical noise correlations with shear symmetry---those that can be interpreted as a fundamental noncommutativity of space-time position in orthogonal directions. General experimental constraints are placed on parameters of a set of models of spatial shear noise correlations, with a sensitivity that exceeds the Planck-scale holographic information bound on position states by a large factor. This result significantly extends the upper limits placed on models of directional noncommutativity by currently operating gravitational wave observatories.« less
Science plus management equals successful remediation: A case study
DOE Office of Scientific and Technical Information (OSTI.GOV)
Buehlman, M.D.; Rogers, D.T.; Payne, F.C.
A case study involving a Brownfields site in southeastern Michigan clearly illustrates the elements of successful remediation. The site`s soil was contaminated with polychlorinated biphenyls (PCBs) and its groundwater with a variety of chlorinated solvents. The original estimate for remediation has exceeded $30 million. Several phases of investigation were conducted to evaluate the nature and sources of contaminants, the site`s hydrogeology, potential risks to human health and the environment, and feasible remedial technologies. Multiple cleanup criteria were established for different affected areas based on the results of the investigations, changes that were taking place with the state cleanup regulations andmore » standards and subsequent negotiations with state and federal regulators. Innovative remedial technologies were selected. The result was a remediation that met or exceeded all soil and groundwater cleanup objectives, was performed on schedule, and was highly cost-effective. The final cost was limited to $3 million--one-tenth of the original estimate. The success of this project involved meticulous scientific study and comprehensive understanding of applicable regulatory requirements and available remediation technologies. It also required effective project management to coordinate the multidisciplinary efforts involved and to maintain the constant vertical and horizontal communications necessary to ensure sound decisions at every step in the process.« less
NASA Technical Reports Server (NTRS)
Gordon, T. E.
1995-01-01
The mirror assembly of the AXAF observatory consists of four concentric, confocal, Wolter type 1 telescopes. Each telescope includes two conical grazing incidence mirrors, a paraboloid followed by a hyperboloid. Fabrication of these state-or-the-art optics is now complete, with predicted performance that surpasses the goals of the program. The fabrication of these optics, whose size and requirements exceed those of any previous x-ray mirrors, presented a challenging task requiring the use of precision engineering in many different forms. Virtually all of the equipment used for this effort required precision engineering. Accurate metrology required deterministic support of the mirrors in order to model the gravity distortions which will not be present on orbit. The primary axial instrument, known as the Precision Metrology Station (PMS), was a unique scanning Fizeau interferometer. After metrology was complete, the optics were placed in specially designed Glass Support Fixtures (GSF's) for installation on the Automated Cylindrical Grinder/Polishers (ACG/P's). The GSF's were custom molded for each mirror element to match the shape of the outer surface to minimize distortions of the inner surface. The final performance of the telescope is expected to far exceed the original goals and expectations of the program.
Re-evaluation and updating of the seismic hazard of Lebanon
NASA Astrophysics Data System (ADS)
Huijer, Carla; Harajli, Mohamed; Sadek, Salah
2016-01-01
This paper presents the results of a study undertaken to evaluate the implications of the newly mapped offshore Mount Lebanon Thrust (MLT) fault system on the seismic hazard of Lebanon and the current seismic zoning and design parameters used by the local engineering community. This re-evaluation is critical, given that the MLT is located at close proximity to the major cities and economic centers of the country. The updated seismic hazard was assessed using probabilistic methods of analysis. The potential sources of seismic activities that affect Lebanon were integrated along with any/all newly established characteristics within an updated database which includes the newly mapped fault system. The earthquake recurrence relationships of these sources were developed from instrumental seismology data, historical records, and earlier studies undertaken to evaluate the seismic hazard of neighboring countries. Maps of peak ground acceleration contours, based on 10 % probability of exceedance in 50 years (as per Uniform Building Code (UBC) 1997), as well as 0.2 and 1 s peak spectral acceleration contours, based on 2 % probability of exceedance in 50 years (as per International Building Code (IBC) 2012), were also developed. Finally, spectral charts for the main coastal cities of Beirut, Tripoli, Jounieh, Byblos, Saida, and Tyre are provided for use by designers.
Miotla, Pawel; Romanek-Piva, Katarzyna; Bogusiewicz, Michal; Markut-Miotla, Ewa; Adamiak, Aneta; Wróbel, Andrzej; Zebrowska, Małgorzata; Wawrysiuk, Sara; Mendyk, Katarzyna; Rechberger, Ewa; Jakubczak, Agata; Rechberger, Tomasz
2017-01-01
Aim . Urinary tract infection (UTI) is considered one of the most common bacterial infections in women. The aim of this study was to investigate the types of uropathogens present, as well as the degree of antimicrobial drug resistance seen among premenopausal ( n = 2748) and postmenopausal ( n = 1705) women with uncomplicated UTI. Methods . Urinary samples ( n = 4453) collected from women with UTI were analyzed in terms of uropathogens present. These were considered as positive if bacterial growth was ≥10 5 colony forming units (CFUs)/mL. Susceptibility and resistance testing for commonly used antibiotics was subsequently assessed. Results . The most common uropathogens cultured from urine samples were Escherichia coli (65.5%), followed by Enterococcus faecalis (12.2%), Klebsiella pneumoniae (4.7%), and Proteus mirabilis (4.2%). The resistance to ampicillin exceeded 40%, independently of menopausal status. Of note, resistance to ciprofloxacin exceeded 25% among postmenopausal patients. Moreover, resistance of all uropathogens to commonly used antimicrobials was significantly higher in postmenopausal women. Conclusion . Due to the high resistance rate, ampicillin, ciprofloxacin, and the trimethoprim/sulfamethoxazole combination should be avoided in treating postmenopausal women affected by UTI without being indicated by initial urine culture report. Finally, cephalexin and cefuroxime are promising alternatives as initial treatment in postmenopausal women.
Interferometric constraints on quantum geometrical shear noise correlations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Chou, Aaron; Glass, Henry; Richard Gustafson, H.
Final measurements and analysis are reported from the first-generation Holometer, the first instrument capable of measuring correlated variations in space-time position at strain noise power spectral densities smaller than a Planck time. The apparatus consists of two co-located, but independent and isolated, 40 m power-recycled Michelson interferometers, whose outputs are cross-correlated to 25 MHz. The data are sensitive to correlations of differential position across the apparatus over a broad band of frequencies up to and exceeding the inverse light crossing time, 7.6 MHz. By measuring with Planck precision the correlation of position variations at spacelike separations, the Holometer searches formore » faint, irreducible correlated position noise backgrounds predicted by some models of quantum space-time geometry. The first-generation optical layout is sensitive to quantum geometrical noise correlations with shear symmetry---those that can be interpreted as a fundamental noncommutativity of space-time position in orthogonal directions. General experimental constraints are placed on parameters of a set of models of spatial shear noise correlations, with a sensitivity that exceeds the Planck-scale holographic information bound on position states by a large factor. This result significantly extends the upper limits placed on models of directional noncommutativity by currently operating gravitational wave observatories.« less
Recommendations for NRC policy on shift scheduling and overtime at nuclear power plants
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lewis, P.M.
1985-07-01
This report contains the Pacific Northwest Laboratory's (PNL's) recommendations to the US Nuclear Regulatory Commission (NRC) for an NRC policy on shift scheduling and hours of work (including overtime) for control room operators and other safety-related personnel in nuclear power plants. First, it is recommended that NRC make three additions to its present policy on overtime: (1) limit personnel to 112 hours of work in a 14-day period, 192 hours in 28 days, and 2260 hours in one year; exceeding these limits would require plant manager approval; (2) add a requirement that licensees obtain approval from NRC if plant personnelmore » are expected to exceed 72 hours of work in a 7-day period, 132 hours in 14 days, 228 hours in 28 days, and 2300 hours in one year; and (3) make the policy a requirement, rather than a nonbinding recommendation. Second, it is recommended that licensees be required to obtain NRC approval to adopt a routine 12-hour/day shift schedule. Third, it is recommended that NRC add several nonbinding recommendations concerning routine 8-hour/day schedules. Finally, because additional data can strengthen the basis for future NRC policy on overtime, five methods are suggested for collecting data on overtime and its effects. 44 refs., 10 tabs.« less
Parallel task processing of very large datasets
NASA Astrophysics Data System (ADS)
Romig, Phillip Richardson, III
This research concerns the use of distributed computer technologies for the analysis and management of very large datasets. Improvements in sensor technology, an emphasis on global change research, and greater access to data warehouses all are increase the number of non-traditional users of remotely sensed data. We present a framework for distributed solutions to the challenges of datasets which exceed the online storage capacity of individual workstations. This framework, called parallel task processing (PTP), incorporates both the task- and data-level parallelism exemplified by many image processing operations. An implementation based on the principles of PTP, called Tricky, is also presented. Additionally, we describe the challenges and practical issues in modeling the performance of parallel task processing with large datasets. We present a mechanism for estimating the running time of each unit of work within a system and an algorithm that uses these estimates to simulate the execution environment and produce estimated runtimes. Finally, we describe and discuss experimental results which validate the design. Specifically, the system (a) is able to perform computation on datasets which exceed the capacity of any one disk, (b) provides reduction of overall computation time as a result of the task distribution even with the additional cost of data transfer and management, and (c) in the simulation mode accurately predicts the performance of the real execution environment.
Rassier, Dilson E; Herzog, Walter; Wakeling, Jennifer; Syme, Douglas A
2003-09-01
Stretch-induced force enhancement has been observed in a variety of muscle preparations and on structural levels ranging from single fibers to in vivo human muscles. It is a well-accepted property of skeletal muscle. However, the mechanism causing force enhancement has not been elucidated, although the sarcomere-length non-uniformity theory has received wide support. The purpose of this paper was to re-investigate stretch-induced force enhancement in frog single fibers by testing specific hypotheses arising from the sarcomere-length non-uniformity theory. Single fibers dissected from frog tibialis anterior (TA) and lumbricals (n=12 and 22, respectively) were mounted in an experimental chamber with physiological Ringer's solution (pH=7.5) between a force transducer and a servomotor length controller. The tetantic force-length relationship was determined. Isometric reference forces were determined at optimum length (corresponding to the maximal, active, isometric force), and at the initial and final lengths of the stretch experiments. Stretch experiments were performed on the descending limb of the force-length relationship after maximal tetanic force was reached. Stretches of 2.5-10% (TA) and 5-15% lumbricals of fiber length were performed at 0.1-1.5 fiber lengths/s. The stretch-induced, steady-state, active isometric force was always equal or greater than the purely isometric force at the muscle length from which the stretch was initiated. Moreover, for stretches of 5% fiber length or greater, and initiated near the optimum length of the fiber, the stretch-enhanced active force always exceeded the maximal active isometric force at optimum length. Finally, we observed a stretch-induced enhancement of passive force. We conclude from these results that the sarcomere length non-uniformity theory alone cannot explain the observed force enhancement, and that part of the force enhancement is associated with a passive force that is substantially greater after active compared to passive muscle stretch.
A one year pay-as-you-speed trial with economic incentives for not speeding.
Stigson, Helena; Hagberg, Jan; Kullgren, Anders; Krafft, Maria
2014-01-01
The objective was to identify whether it was possible to change driver behavior by economic incentives and thereby reduce crash risk. Furthermore, the objective was to evaluate the participants' attitudes toward the pay-as-you-speed (PAYS) concept. A one-year PAYS trial with economic incentives for keeping speed limits using intelligent speed assistance (ISA) was conducted in Sweden during 2011-2012. The full incentive was a 30 percent discount off the insurance premium. The participants were private insurance customers and were randomized into a test group (initial n = 152, final n = 128) and a control group (initial n = 98, final n = 68). When driving, the drivers in the test group were informed and warned visually when the speed limit was exceeded. They could also follow their driving results on a personal website. The control group was not given any feedback at all. To reflect the impact of the PAYS concept the proportion of distance driven above the speed limit was compared between the 2 groups. The introduction of a PAYS concept shows that the test group significantly reduced the proportion of distance driven above the speed limit. The proportion of driving at a speed exceeding 5 km/h over the speed limit was 6 percent for the test group and 14 percent for the control group. It also showed that the effect was higher the higher the violation of speed. The result remained constant over time. It was shown that a PAYS concept is an effective way to reduce speed violations. Hence, it has the possibility to reduce crash severity and thereby to save lives. This could be an important step toward a safer road transport system. The majority of the participants were in favor of the concept, which indicates the potential of a new insurance product in the future.
Evaluating the atmospheric drivers leading to the December 2014 flood in Schleswig-Holstein, Germany
NASA Astrophysics Data System (ADS)
Schade, Nils H.
2017-06-01
Regional analyses of atmospheric conditions that may cause flooding of important transport infrastructure (railway tracks, highways/roads, rivers/channels) and subsequent adaptation measures are part of topic 1 of the network of experts initiated by the German Federal Ministry of Transport and Digital Infrastructure (BMVI). As an example case study, the December 2014 flood in Schleswig-Holstein, Germany, was investigated. Atmospheric conditions at the onset of the flood event are described and evaluated with respect to the general weather circulation, initial wetness, and event precipitation. Persistent, predominantly westerly general weather circulations (GWCs) directed several low-pressure systems over the North Sea to Schleswig-Holstein during December 2014, accompanied by prolonged rainfall and finally a strong precipitation event in southern Schleswig-Holstein, causing several inland gauges to exceed their, by then maximum, water levels. Results show that the antecedent precipitation index (API) is able to reflect the soil moisture conditions and, in combination with the maximum 3-day precipitation sum (R3d), to capture the two main drivers finally leading to the flood: (1) the initial wetness of north-western Schleswig-Holstein and (2) strong event precipitation in southern and eastern Schleswig-Holstein from 21 to 23 December; at the same time, both indices exceeded their respective 5-year return periods. Further, trend analyses show that both API and R3d have been increasing during recent years, while regional patterns match the north-eastward shift of cyclone pathways, leading to a higher risk of flooding in Schleswig-Holstein. Within the network of experts, investigations of these and further indices/drivers for earth system changes (e.g. wind surge and sea level rise) derived from observations, reanalyses, and regional climate model data are planned for all German coastal areas. Results can be expected to lead to improved adaptation measures to floods under climate change conditions wherever catchments have to be drained and infrastructures and ecosystems may be harmed.
Kenney, Terry A.
2010-01-01
Operational procedures at U.S. Geological Survey gaging stations include periodic leveling checks to ensure that gages are accurately set to the established gage datum. Differential leveling techniques are used to determine elevations for reference marks, reference points, all gages, and the water surface. The techniques presented in this manual provide guidance on instruments and methods that ensure gaging-station levels are run to both a high precision and accuracy. Levels are run at gaging stations whenever differences in gage readings are unresolved, stations may have been damaged, or according to a pre-determined frequency. Engineer's levels, both optical levels and electronic digital levels, are commonly used for gaging-station levels. Collimation tests should be run at least once a week for any week that levels are run, and the absolute value of the collimation error cannot exceed 0.003 foot/100 feet (ft). An acceptable set of gaging-station levels consists of a minimum of two foresights, each from a different instrument height, taken on at least two independent reference marks, all reference points, all gages, and the water surface. The initial instrument height is determined from another independent reference mark, known as the origin, or base reference mark. The absolute value of the closure error of a leveling circuit must be less than or equal to ft, where n is the total number of instrument setups, and may not exceed |0.015| ft regardless of the number of instrument setups. Closure error for a leveling circuit is distributed by instrument setup and adjusted elevations are determined. Side shots in a level circuit are assessed by examining the differences between the adjusted first and second elevations for each objective point in the circuit. The absolute value of these differences must be less than or equal to 0.005 ft. Final elevations for objective points are determined by averaging the valid adjusted first and second elevations. If final elevations indicate that the reference gage is off by |0.015| ft or more, it must be reset.
Target and Projectile: Material Effects on Crater Excavation and Growth
NASA Technical Reports Server (NTRS)
Anderson, J. L. B.; Burleson, T.; Cintala, Mark J.
2010-01-01
Scaling relationships allow the initial conditions of an impact to be related to the excavation flow and final crater size and have proven useful in understanding the various processes that lead to the formation of a planetary-scale crater. In addition, they can be examined and tested through laboratory experiments in which the initial conditions of the impact are known and ejecta kinematics and final crater morphometry are measured directly. Current scaling relationships are based on a point-source assumption and treat the target material as a continuous medium; however, in planetary-scale impacts, this may not always be the case. Fragments buried in a megaregolith, for instance, could easily approach or exceed the dimensions of the impactor; rubble-pile asteroids could present similar, if not greater, structural complexity. Experiments allow exploration into the effects of target material properties and projectile deformation style on crater excavation and dimensions. This contribution examines two of these properties: (1) the deformation style of the projectile, ductile (aluminum) or brittle (soda-lime glass) and (2) the grain size of the target material, 0.5-1 mm vs. 1-3 mm sand.
Near Real-Time Optimal Prediction of Adverse Events in Aviation Data
NASA Technical Reports Server (NTRS)
Martin, Rodney Alexander; Das, Santanu
2010-01-01
The prediction of anomalies or adverse events is a challenging task, and there are a variety of methods which can be used to address the problem. In this paper, we demonstrate how to recast the anomaly prediction problem into a form whose solution is accessible as a level-crossing prediction problem. The level-crossing prediction problem has an elegant, optimal, yet untested solution under certain technical constraints, and only when the appropriate modeling assumptions are made. As such, we will thoroughly investigate the resilience of these modeling assumptions, and show how they affect final performance. Finally, the predictive capability of this method will be assessed by quantitative means, using both validation and test data containing anomalies or adverse events from real aviation data sets that have previously been identified as operationally significant by domain experts. It will be shown that the formulation proposed yields a lower false alarm rate on average than competing methods based on similarly advanced concepts, and a higher correct detection rate than a standard method based upon exceedances that is commonly used for prediction.
Cameron Station remedial investigation: Final asbestos survey report. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
Woodward-Clyde Federal Services (WCFS) conducted a comprehensive asbestos survey of the facilities at Cameron Station as part of its contract with the US Army Toxic and Hazardous Materials Agency (USATHAMA) to perform a remedial investigation and feasibility study (RI/FS) at the base. The purpose of the survey which was initiated August 23, 1990 in response to the Base Realignment And Closure Environmental Restoration Strategy (BRAC), was to identify friable and non-friable asbestos-containing material (ACM), provide options for abatement of asbestos, provide cost estimates for both abatement and operations and maintenance costs, and identifying actions requiring immediate action in Cameron Station`smore » 24 buildings. BRAC states that only friable asbestos which presents a threat to health and safety shall be removed; non-friable asbestos or friable asbestos which is encapsulated or in good repair shall be left in place and identified to the buyer per GSA agreement. The investigation followed protocols that met or exceeded the requirements of 40 CFR 763, the EPA regulations promulgated under the Asbestos Hazard Emergency Response Act (AHERA).« less
Galvanic Liquid Applied Coating Development for Protection of Steel in Concrete
NASA Technical Reports Server (NTRS)
Curran, Joseph John; Curran, Jerry; MacDowell, Louis
2004-01-01
Corrosion of reinforcing steel in concrete is a major problem affecting NASA facilities at Kennedy Space Center (KSC), other government agencies, and the general public. Problems include damage to KSC launch support structures, transportation and marine infrastructures, as well as building structures. A galvanic liquid applied coating was developed at KSC in order to address this problem. The coating is a non-epoxy metal rich ethyl silicate liquid coating. The coating is applied as a liquid from initial stage to final stage. Preliminary data shows that this coating system exceeds the NACE 100 millivolt shift criterion. The remainder of the paper details the development of the coating system through the following phases: Phase I: Development of multiple formulations of the coating to achieve easy application characteristics, predictable galvanic activity, long-term protection, and minimum environmental impact. Phase II: Improvement of the formulations tested in Phase I including optimization of metallic loading as well as incorporation of humectants for continuous activation. Phase III: Application and testing of improved formulations on the test blocks. Phase IV: Incorporation of the final formulation upgrades onto large instrumented structures (slabs).
NASA Technical Reports Server (NTRS)
Howard, James C.
1976-01-01
Remotely piloted research vehicles (RPRVS) are currently being flown from fixed-base control centers, and visual information is supplied to the remote pilot by a TV camera mounted in the vehicle. In these circumstances, the possibility of a TV failure or an interruption in the downlink to the pilot must be considered. To determine the influence of loss of TV information on pilot performance during the final approach and landing phase of a mission, an experiment was conducted in which pilots were asked to fly a fixed-base simulation of a Piper PA-30 aircraft with loss of TV information occurring at altitudes of 15.24, 30.48, and 45.72 m (50, 100, and 150 ft). For this experiment, a specially designed display configuration was presented to four pilots in accordance with a Latin square design. Initial results indicate that pilots could not ensure successful landings from altitudes exceeding 15.24 m (.50 ft) without the visual cues supplied by the TV picture.
A high temperature superconductor notch filter for the Sardinia Radio Telescope
NASA Astrophysics Data System (ADS)
Bolli, Pietro; Cresci, Luca; Huang, Frederick; Mariotti, Sergio; Panella, Dario
2018-04-01
A High Temperature Superconductor filter operating in the C-band between 4200 and 5600 MHz has been developed for one of the radio astronomical receivers of the Sardinia Radio Telescope. The motivation was to attenuate an interference from a weather radar at 5640 MHz, whose power level exceeds the linear region of the first active stages of the receiver. A very sharp transition after the nominal maximum passband frequency is reached by combining a 6th order band-pass filter with a 6th order stop-band. This solution is competitive with an alternative layout based on a cascaded triplet filter. Three units of the filter have been measured with two different calibration approaches to investigate pros and cons of each, and data repeatability. The final performance figures of the filters are: ohmic losses of the order of 0.15-0.25 dB, matching better than -15 dB, and -30 dB attenuation at 5640 MHz. Finally, a more accurate model of the connection between external connector and microstrip shows a better agreement between simulations and experimental data.
Full-grown oocytes from Xenopus laevis resume growth when placed in culture
Wallace, Robin A.; Misulovin, Ziva; Etkin, Laurence D.
1981-01-01
When most full-grown, follicle cell-invested oocytes from Xenopus laevis are placed in an appropriate culture medium, they resume growth and remain physiologically healthy for at least 2-3 weeks. Rates of growth by full-grown oocytes in vitro generally approximate and can even exceed the most rapid growth rate achieved by vitellogenic oocytes in vivo. Resumption of oocyte growth can be correlated with the loss of investing follicle cells, which under normal conditions appear to interfere with vitellogenin and nutrient access to the oocyte. The final size reached by the oocyte within the ovary is thus not an intrinsic property of the oocyte but is extrinsically imposed by the somatic environment. Images PMID:16593019
Munguia, Lluis-Miquel; Oxberry, Geoffrey; Rajan, Deepak
2016-05-01
Stochastic mixed-integer programs (SMIPs) deal with optimization under uncertainty at many levels of the decision-making process. When solved as extensive formulation mixed- integer programs, problem instances can exceed available memory on a single workstation. In order to overcome this limitation, we present PIPS-SBB: a distributed-memory parallel stochastic MIP solver that takes advantage of parallelism at multiple levels of the optimization process. We also show promising results on the SIPLIB benchmark by combining methods known for accelerating Branch and Bound (B&B) methods with new ideas that leverage the structure of SMIPs. Finally, we expect the performance of PIPS-SBB to improve furthermore » as more functionality is added in the future.« less
Research safety vehicle, Phase II. Volume I. Executive summary. Final report jul 75-dec 76
DOE Office of Scientific and Technical Information (OSTI.GOV)
Struble, D.
1976-12-01
Volume I summarizes the results of the Minicars Research Safety Vehicle Phase II program, as detailed in Volumes II and III. Phase I identified trends leading to the desired national social goals of the mid-1980's in vehicle crashworthiness, crash avoidance, damageability, pedestrian safety, fuel economy, emissions and cost, and characterized an RSV to satisfy them. In Phase II an RSV prototype was designed, developed and tested to demonstrate the feasibility of meeting these goals simultaneously. Although further refinement is necessary to assure operational validity, in all categories the results meet or exceed the most advanced performance specified by The Presidentialmore » Task Force on Motor Vehicle Goals beyond 1980.« less
Proven high-performance display solution
NASA Astrophysics Data System (ADS)
Johnson, Rick J.; Shaw, James E.; Mosier, Don; Liss, Raymond L.; Prouty, Todd D.; Davis, Josh; Marzen, Vincent P.; Deloy, Christian T.
2002-08-01
Rockwell Collins serves both the military and the commercial segments by exploiting the common elements of these applications. Rockwell Collins has created a liquid crystal display family capable of 100:1 contrast ratio, 40:1 high ambient contrast, 0.25% specular reflectance, 0.1% diffuse reflectance, enhanced color stability over +/- 55H, 0-30V field of view, 300 fL with 10K:1 dimming range, color NVIS B compliance while exceeding environmental performance requirements though ruggedization. In order to meet the full range of display requirements at a system level, all the components must be understood and managed to meet the end solution of the final system. This paper details Rockwell Collins' optical performance using an avionics grade panel, third generation custom compensation, and solid state backlight.
NASA Technical Reports Server (NTRS)
Whorton, M. S.; Eldridge, J. T.; Ferebee, R. C.; Lassiter, J. O.; Redmon, J. W., Jr.
1998-01-01
As a research facility for microgravity science, the International Space Station (ISS) will be used for numerous investigations such as protein crystal growth, combustion, and fluid mechanics experiments which require a quiescent acceleration environment across a broad spectrum of frequencies. These experiments are most sensitive to low-frequency accelerations and can tolerate much higher accelerations at higher frequency. However, the anticipated acceleration environment on ISS significantly exceeds the required acceleration level. The ubiquity and difficulty in characterization of the disturbance sources precludes source isolation, requiring vibration isolation to attenuate the anticipated disturbances to an acceptable level. This memorandum reports the results of research in active control methods for microgravity vibration isolation.
Undercooling, Liquid Separation and Solidification of Cu-Co Alloys
NASA Technical Reports Server (NTRS)
Robinson, M. B.; Li, D.; Rathz, J.; Williams, G.
1998-01-01
Large undercooling can induce not only various solidification pathways, but also a precursor reaction, or liquid separation. This paper deals with the latter effect of undercooling using examples of the Cu-Co system which has a flattened liquidus. Bulk Cu-Co alloys (about 7mm diameter) at compositions ranging from 10 to 90 wt pct Co were highly undercooled using a fluxing technique. Except for Cu-90 wt pct Co, liquid separation was directly observed as undercooling exceeded a critical value depending on the composition. It was also confirmed by a microstructural transition from dendrites to droplets above the critical undercooling. Finally, theoretical calculations regarding the metastable miscibility boundary and maximum droplet radius were made to analyze the experimental results.
A Markovian model for assessment of personnel hiring plans
NASA Technical Reports Server (NTRS)
Katz, L. G.
1974-01-01
As a result of the current economic environment, many organizations are having to operate with fewer resources. In the manpower area, these constraints have forced organizations to operate within well-defined hiring plans. Exceeding personnel ceilings is in most cases an intolerable situation. A mathematical model, based on the theory of Markov processes, is presented which can be used to assess the chances of success of personnel hiring plans. The model considers a plan to be successful if the final population size, at the end of the planning period, lies within a range specified by management. Although this model was developed to assess personnel hiring plans at the Goddard Space Flight Center, it is directly applicable wherever personnel hiring plans are used.
Organic solvents in the pharmaceutical industry.
Grodowska, Katarzyna; Parczewski, Andrzej
2010-01-01
Organic solvents are commonly used in the pharmaceutical industry as reaction media, in separation and purification of synthesis products and also for cleaning of equipment. This paper presents some aspects of organic solvents utilization in an active pharmaceutical ingredient and a drug product manufacturing process. As residual solvents are not desirable substances in a final product, different methods for their removal may be used, provided they fulfill safety criteria. After the drying process, analyses need to be performed to check if amounts of solvents used at any step of the production do not exceed acceptable limits (taken from ICH Guideline or from pharmacopoeias). Also new solvents like supercritical fluids or ionic liquids are developed to replace "traditional" organic solvents in the pharmaceutical production processes.
The Magnetospheric Mapping Mission
NASA Technical Reports Server (NTRS)
Spence, Harlan E.
2001-01-01
This final report describes the efforts accomplished during the grant's period of performance, covering the period of 15 March 1997 to 14 March 2001, of a NASA Space Physics New Mission Concepts grant. We have met and far exceeded the goals set forth in the proposed research objectives. The results of several studies are published in the refereed engineering and scientific literature. In addition, numerous invited and contributed presentations of these studies have been presented at national and international meetings during the performance period. We developed a mission concept that could allow for hundreds of one kilogram spacecraft to be placed in orbit with a single mothership and we used the funding to move rapidly forward with the nanosatellite design needed to envision any large constellation.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Woodroffe, Jesse Richard; Morley, S. K.; Jordanova, V. K.
Geoelectromagnetic disturbances (GMDs) are an important consequence of space weather that can directly impact many types of terrestrial infrastructure. In this paper, we analyze 30 years of SuperMAG magnetometer data from the range of magnetic latitudes 20°≤λ≤75° to derive characteristic latitudinal profiles for median GMD amplitudes. Based on this data, we obtain a parameterization of these latitudinal profiles of different types of GMDs, providing an analytical fit with Dst-dependent parameters. Finally, we also obtain probabilistic estimates for the magnitudes of “100 year” GMDs, finding thatmore » $$\\dot{_B}$$ = 6.9 (3.60–12.9) nT/s should be expected at 45°≤λ< 50°, exceeding the 5 nT/s threshold for dangerous inductive heating.« less
Improved toughness of silicon carbide
NASA Technical Reports Server (NTRS)
Palm, J. A.
1976-01-01
Impact energy absorbing layers (EALs) comprised of partially densified silicon carbide were formed in situ on fully sinterable silicon carbide substrates. After final sintering, duplex silicon carbide structures resulted which were comprised of a fully sintered, high density silicon carbide substrate or core, overlayed with an EAL of partially sintered silicon carbide integrally bonded to its core member. Thermal cycling tests proved such structures to be moderately resistant to oxidation and highly resistant to thermal shock stresses. The strength of the developed structures in some cases exceeded but essentially it remained the same as the fully sintered silicon carbide without the EAL. Ballistic impact tests indicated that substantial improvements in the toughness of sintered silicon carbide were achieved by the use of the partially densified silicon carbide EALs.
Theoretical and Experimental Investigation of Particle Trapping via Acoustic Bubbles
NASA Astrophysics Data System (ADS)
Chen, Yun; Fang, Zecong; Merritt, Brett; Saadat-Moghaddam, Darius; Strack, Dillon; Xu, Jie; Lee, Sungyon
2014-11-01
One important application of lab-on-a-chip devices is the trapping and sorting of micro-objects, with acoustic bubbles emerging as an effective, non-contact method. Acoustically actuated bubbles are known to exert a secondary radiation force on micro-particles and trap them, when this radiation force exceeds the drag force that acts to keep the particles in motion. In this study, we theoretically evaluate the magnitudes of these two forces for varying actuation frequencies and voltages. In particular, the secondary radiation force is calculated directly from bubble oscillation shapes that have been experimentally measured for varying acoustic parameters. Finally, based on the force estimates, we predict the threshold voltage and frequency for trapping and compare them to the experimental results.
Final Report - Advanced Cathode Catalysts and Supports for PEM Fuel Cells
DOE Office of Scientific and Technical Information (OSTI.GOV)
Debe, Mark
2012-09-28
The principal objectives of the program were development of a durable, low cost, high performance cathode electrode (catalyst and support), that is fully integrated into a fuel cell membrane electrode assembly with gas diffusion media, fabricated by high volume capable processes, and is able to meet or exceed the 2015 DOE targets. Work completed in this contract was an extension of the developments under three preceding cooperative agreements/grants Nos. DE-FC-02-97EE50473, DE-FC-99EE50582 and DE-FC36- 02AL67621 which investigated catalyzed membrane electrode assemblies for PEM fuel cells based on a fundamentally new, nanostructured thin film catalyst and support system, and demonstrated the feasibilitymore » for high volume manufacturability.« less
Local-world and cluster-growing weighted networks with controllable clustering
NASA Astrophysics Data System (ADS)
Yang, Chun-Xia; Tang, Min-Xuan; Tang, Hai-Qiang; Deng, Qiang-Qiang
2014-12-01
We constructed an improved weighted network model by introducing local-world selection mechanism and triangle coupling mechanism based on the traditional BBV model. The model gives power-law distributions of degree, strength and edge weight and presents the linear relationship both between the degree and strength and between the degree and the clustering coefficient. Particularly, the model is equipped with an ability to accelerate the speed increase of strength exceeding that of degree. Besides, the model is more sound and efficient in tuning clustering coefficient than the original BBV model. Finally, based on our improved model, we analyze the virus spread process and find that reducing the size of local-world has a great inhibited effect on virus spread.
NASA Technical Reports Server (NTRS)
Zaretsky, E. V.; Bamberger, E. N.
1972-01-01
Groups of 120-mm-bore angular-contact ball bearings made from AISI M-50 steel were fatigue tested with a tetraester and a synthetic paraffinic oil at a bearing temperature of 492 K (425 F) in an air environment. Bearing life exceeded AFBMA-predicted (catalog) life by factors in excess of 4 and 10 for the tetraester and synthetic paraffinic fluids, respectively. The final viscosities after 500 hours of operation were 14 and 6 times the initial values, respectively. During the same time period, when the test oil is replaced at a rate approximating the replenishment rate in actual commerical engine usage, no significant increase in lubricant viscosity with time was observed.
Nanostructured materials: A novel approach to enhanced performance. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Korth, G.E.; Froes, F.H.; Suryanarayana, C.
Nanostuctured materials are an emerging class of materials that can exhibit physical and mechanical characteristics often exceeding those exhibited by conventional course grained materials. A number of different techniques can be employed to produce these materials. In this program, the synthesis methods were (a) mechanical alloying , (b) physical vapor deposition, and (c) plasma processing. The physical vapor deposition and plasma processing were discontinued after initial testing with subsequent efforts focused on mechanical alloying. The major emphasis of the program was on the synthesis, consolidation, and characterization of nanostructured Al-Fe, Ti-Al, Ti-Al-Nb, and Fe-Al by alloying intermetallics with a viewmore » to increase their ductilities. The major findings of this project are reported.« less
Chan Ng, Pauline; Huang, Chiung-Hui; Rajakulendran, Mohana; Tan, Michelle Meiling; Wang, Ping Ping; Tay, Lei Qiu; Goh, Siok Ying; Shek, Lynette Pei-Chi; Tham, Elizabeth Huiwen
2018-05-29
Gonadotropin-releasing hormone (GnRH) analogues are commonly used in pediatric patients in the treatment of central precocious puberty 1 . GnRH analogues suppress the secretion of gonadotropins and sex hormones, preventing progression to advanced puberty and reduced final adult height secondary to accelerated fusion of growth plates. GnRH analogues are also used in adults for treatment of endometriosis 2 and prostatic cancer 3 . Hypersensitivity reactions to GnRH analogues are exceedingly rare 4-6 and to date, we are unaware of any desensitization protocols for GnRH hypersensitivity in the literature or used in clinical practice. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.
On the origin of the highest ozone episodes in Spain.
Querol, X; Alastuey, A; Reche, C; Orio, A; Pallares, M; Reina, F; Dieguez, J J; Mantilla, E; Escudero, M; Alonso, L; Gangoiti, G; Millán, M
2016-12-01
The 2000-2015 occurrences of the highest ozone (O 3 ) pollution episodes in Spain were evaluated to investigate their origin. To this end, data series available for urban and regional background (UB and RB), traffic (TR) and industrial (IN) sites were analysed separately and intercompared. Results evidenced that during these 16years mean O 3 levels in the RB sites did not change significantly, and remained constantly high. However, there is a clear increase at the TR and UB sites. Although sensitivity analysis is needed to interpret the cause of this increasing trend, this might be caused probably by the lower O 3 titration intensity due to the preferential abatement of NO vs NO 2 , as supported from the neutral trend of O X (NO 2 +O 3 ) at these sites. We found that the exceedances of the hourly information threshold for O 3 (>180μg/m 3 ) are recorded mostly at UB and IN sites located in seven areas of Spain (specific hotspots or at the tail end of large urban plumes), and that these increased during summer heatwaves (i.e. 2003 and 2015). Although the external contribution of regional-to-subcontinental transported O 3 might be relevant during the highest O 3 episodes in the Western Mediterranean, our results evidenced that in the above specific areas, regional-local O 3 production decisively contributes to the exceedances of the information threshold. Also that the human protection threshold and the AOT40 are more frequently exceeded in the Central, Southern and Mediterranean sides of the Iberian Peninsula. The design of effective episode abatement measures is quite complex in those conditions, due to both the nonlinearity of the chemical processes of O 3 formation and destruction, and to the interplay with the complex meteorological setting, causing frequent recirculation and in situ aging of air masses. However, the combination of meteorological forecasting of the main recirculation processes and sensitivity analysis of NO X /VOC emission abatement measures might be powerful tools to evaluate the effectiveness of potential O 3 mitigation strategies. Finally we would like to highlight that the current UB, RB, IN and TR classification (somewhat subjective) is not adequate to interpret the origin of O 3 exceedances in complex areas of Southern Europe. Thus, a UB station recording exceedances, and located in a small city in the tail end of an urban plume of a large city, receives not only the contribution from its own UB, but mainly from the specific high O 3 RB caused by the urban plume transport. Copyright © 2016 Elsevier B.V. All rights reserved.
Closure Report for Corrective Action Unit 574: Neptune, Nevada National Security Site, Nevada
DOE Office of Scientific and Technical Information (OSTI.GOV)
NSTec Environmental Restoration
Corrective Action Unit (CAU) 574 is identified in the Federal Facility Agreement and Consent Order (FFACO) as 'Neptune' and consists of the following two Corrective Action Sites (CASs), located in Area 12 of the Nevada National Security Site: (1) CAS 12-23-10, U12c.03 Crater (Neptune); and (2) CAS 12-45-01, U12e.05 Crater (Blanca). This Closure Report presents information supporting closure of CAU 574 according to the FFACO (FFACO, 1996 [as amended March 2010]) and the Streamlined Approach for Environmental Restoration Plan for CAU 574 (U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office [NNSA/NSO], 2011). The following activities were performedmore » to support closure of CAU 574: (1) In situ external dose rate measurements were collected using thermoluminescent dosimeters at CAS 12-45-01, U12e.05 Crater (Blanca). (2) Total effective dose rates were determined at both sites by summing the internal and external dose rate components. (3) A use restriction (UR) was implemented at CAS 12-23-10, U12c.03 Crater (Neptune). Areas that exceed the final action level (FAL) of 25 millirems per year (mrem/yr) based on the Occasional Use Area exposure scenario are within the existing use restricted area for CAU 551. The 25-mrem/yr FAL is not exceeded outside the existing CAU 551 UR for any of the exposure scenarios (Industrial Area, Remote Work Area, and Occasional Use Area). Therefore, the existing UR for CAU 551 is sufficient to bound contamination that exceeds the FAL. (4) An administrative UR was implemented at CAS 12-45-01, U12e.05 Crater (Blanca) as a best management practice (BMP). The 25-mrem/yr FAL was not exceeded for the Remote Work Area or Occasional Use Area exposure scenarios; therefore, a UR is not required. However, because the 25-mrem/yr FAL was exceeded for the Industrial Area exposure scenario, an administrative UR was established as a BMP. UR documentation is included as Appendix B. The UR at CAS 12-23-10, U12c.03 Crater (Neptune), is within the existing UR for CAU 551. Additional postings were not installed, and annual post-closure inspections will be performed in conjunction with the inspections performed for CAU 551. At CAS 12-45-01, U12e.05 Crater (Blanca), the administrative UR does not require postings or inspections. NNSA/NSO requests the following: (1) A Notice of Completion from the Nevada Division of Environmental Protection to NNSA/NSO for closure of CAU 574; and (2) The transfer of CAU 574 from Appendix III to Appendix IV, Closed Corrective Action Units, of the FFACO« less
A computer program designed to produce tables from alphanumeric data
Ridgley, Jennie L.; Schnabel, Robert Wayne
1978-01-01
This program is designed to produce tables from alphanumeric data. Each line of data that appears in the table is entered into a data file as a single line of data. Where necessary, a predetermined delimiter is added to break up the data into column data. The program can process the following types of data: (1) title, (2) headnote, (3) footnote, (4) two levels of column headers, (5) solid lines, (6) blank lines, (7) most types of numeric data, and (8) all types of alphanumeric data. In addition, the program can produce a series of continuation tables from large data sets. Fitting of all data to the final table format is performed by the program, although provisions have been made for user-modification of the final format. The width of the table is adjustable, but may not exceed 158 characters per line. The program is useful in that it permits alteration of original data or table format without having to physically retype all or portions of the table. The final results may be obtained quickly using interactive terminals, and execution of the program requires only minimal knowledge of computer usage. Tables produced may be of publishable quality, especially when reduced. Complete user documentation and program listing are included. NOTE: Although this program has been subjected to many tests a warranty on accuracy or proper functioning is neither implied nor expressed.
Statistical Application and Cost Saving in a Dental Survey.
Chyou, Po-Huang; Schroeder, Dixie; Schwei, Kelsey; Acharya, Amit
2017-06-01
To effectively achieve a robust survey response rate in a timely manner, an alternative approach to survey distribution, informed by statistical modeling, was applied to efficiently and cost-effectively achieve the targeted rate of return. A prospective environmental scan surveying adoption of health information technology utilization within their practices was undertaken in a national pool of dental professionals (N=8000) using an alternative method of sampling. The piloted approach to rate of cohort sampling targeted a response rate of 400 completed surveys from among randomly targeted eligible providers who were contacted using replicated subsampling leveraging mailed surveys. Two replicated subsample mailings (n=1000 surveys/mailings) were undertaken to project the true response rate and estimate the total number of surveys required to achieve the final target. Cost effectiveness and non-response bias analyses were performed. The final mailing required approximately 24% fewer mailings compared to targeting of the entire cohort, with a final survey capture exceeding the expected target. An estimated $5000 in cost savings was projected by applying the alternative approach. Non-response analyses found no evidence of bias relative to demographics, practice demographics, or topically-related survey questions. The outcome of this pilot study suggests that this approach to survey studies will accomplish targeted enrollment in a cost effective manner. Future studies are needed to validate this approach in the context of other survey studies. © 2017 Marshfield Clinic.
Statistical Application and Cost Saving in a Dental Survey
Chyou, Po-Huang; Schroeder, Dixie; Schwei, Kelsey; Acharya, Amit
2017-01-01
Objective To effectively achieve a robust survey response rate in a timely manner, an alternative approach to survey distribution, informed by statistical modeling, was applied to efficiently and cost-effectively achieve the targeted rate of return. Design A prospective environmental scan surveying adoption of health information technology utilization within their practices was undertaken in a national pool of dental professionals (N=8000) using an alternative method of sampling. The piloted approach to rate of cohort sampling targeted a response rate of 400 completed surveys from among randomly targeted eligible providers who were contacted using replicated subsampling leveraging mailed surveys. Methods Two replicated subsample mailings (n=1000 surveys/mailings) were undertaken to project the true response rate and estimate the total number of surveys required to achieve the final target. Cost effectiveness and non-response bias analyses were performed. Results The final mailing required approximately 24% fewer mailings compared to targeting of the entire cohort, with a final survey capture exceeding the expected target. An estimated $5000 in cost savings was projected by applying the alternative approach. Non-response analyses found no evidence of bias relative to demographics, practice demographics, or topically-related survey questions. Conclusion The outcome of this pilot study suggests that this approach to survey studies will accomplish targeted enrollment in a cost effective manner. Future studies are needed to validate this approach in the context of other survey studies. PMID:28373286
1983-09-28
No comment . Inventory will exceed requirements for blank NATO round. (See p. 10.) Inventory will exceed requirements for match round. (See p. 11.) No comment . Premature procurement. (See p. 17.) Inventory will exceed requirements for three types of rounds. (See p. 11.) Inventory will exceed requirements for both rounds. (See p. 13.) No comment . Inventory will exceed requirements for TP-T round. (See p. 13.) No comment . No comment . 38
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harriman, D.A.; Sargent, B.P.
Groundwater quality was evaluated in seven confined aquifers and the water table aquifer in east-central New Jersey based on 237 analyses of samples collected in 1981-82, and 225 older analyses. Investigation of the effect of land use on water quality and several sampling network proposals for the region are reported. Iron (Fe) and manganese (Mn) concentrations exceed US EPA drinking water standards in some wells screened in the Potomac-Raritan-Magothy aquifer system. Sodium (Na) concentrations in samples from three wells more than 800 ft deep in the Englishtown aquifer exceed the standard. Iron and Mn concentrations in this aquifer may alsomore » exceed the standards. Iron concentrations in the Wenonah-Mount Laurel aquifer exceed the standard. Based on 15 analyses of water from the Vincetown aquifer, Mn is the only constituent that exceeds the drinking water standard. In the Manasquan aquifer, 4 of the 16 Na determinations exceed the standard, and 8 of 16 Fe determinations exceed the standard. Water quality in the Atlantic City 800-ft sand is generally satisfactory. However, 12 Fe and 1 of 12 Mn determinations exceed the standards. For the Rio Grande water-bearing zone, 1 of 3 Fe determinations exceed the standard. The Kirkwood-Cohansey aquifer system was the most thoroughly sampled (249 chemical analyses from 209 wells). Dissolved solids, chloride, Fe, nitrate, and Mn concentrations exceed drinking water standards in some areas. 76 refs., 36 figs., 12 tabs.« less
10 CFR 150.11 - Critical mass.
Code of Federal Regulations, 2013 CFR
2013-01-01
... uranium enriched in the isotope U-235 in quantities not exceeding 350 grams of contained U-235; uranium-233 in quantities not exceeding 200 grams; plutonium in quantities not exceeding 200 grams; or any... not exceed the limitation and are within the formula, as follows: (175 (grams contained U-235/350)+(50...
10 CFR 150.11 - Critical mass.
Code of Federal Regulations, 2011 CFR
2011-01-01
... uranium enriched in the isotope U-235 in quantities not exceeding 350 grams of contained U-235; uranium-233 in quantities not exceeding 200 grams; plutonium in quantities not exceeding 200 grams; or any... not exceed the limitation and are within the formula, as follows: (175 (grams contained U-235/350)+(50...
10 CFR 150.11 - Critical mass.
Code of Federal Regulations, 2010 CFR
2010-01-01
... uranium enriched in the isotope U-235 in quantities not exceeding 350 grams of contained U-235; uranium-233 in quantities not exceeding 200 grams; plutonium in quantities not exceeding 200 grams; or any... not exceed the limitation and are within the formula, as follows: (175 (grams contained U-235/350)+(50...
10 CFR 150.11 - Critical mass.
Code of Federal Regulations, 2014 CFR
2014-01-01
... uranium enriched in the isotope U-235 in quantities not exceeding 350 grams of contained U-235; uranium-233 in quantities not exceeding 200 grams; plutonium in quantities not exceeding 200 grams; or any... not exceed the limitation and are within the formula, as follows: (175 (grams contained U-235/350)+(50...
10 CFR 150.11 - Critical mass.
Code of Federal Regulations, 2012 CFR
2012-01-01
... uranium enriched in the isotope U-235 in quantities not exceeding 350 grams of contained U-235; uranium-233 in quantities not exceeding 200 grams; plutonium in quantities not exceeding 200 grams; or any... not exceed the limitation and are within the formula, as follows: (175 (grams contained U-235/350)+(50...
31 CFR 29.342 - Computed annuity exceeds the statutory maximum.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Computed annuity exceeds the... of the Amount of Federal Benefit Payments § 29.342 Computed annuity exceeds the statutory maximum. (a) In cases in which the total computed annuity exceeds the statutory maximum: (1) Federal Benefit...
40 CFR 63.1346 - Operating limits for kilns.
Code of Federal Regulations, 2013 CFR
2013-07-01
..., is not exceeded, except during periods of startup and shutdown when the temperature limit may be... not exceeded, except during periods of startup/shutdown when the temperature limit may be exceeded by... periods of startup/shutdown when the temperature limit may be exceeded by no more than 10 percent. (b) The...
40 CFR 63.1346 - Operating limits for kilns.
Code of Federal Regulations, 2011 CFR
2011-07-01
... not exceeded, except during periods of startup/shutdown when the temperature limit may be exceeded by..., except during periods of startup/shutdown when the temperature limit may be exceeded by no more than 10... performance test, with or without the raw mill operating, is not exceeded, except during periods of startup...
40 CFR 63.1346 - Operating limits for kilns.
Code of Federal Regulations, 2012 CFR
2012-07-01
... not exceeded, except during periods of startup/shutdown when the temperature limit may be exceeded by..., except during periods of startup/shutdown when the temperature limit may be exceeded by no more than 10... performance test, with or without the raw mill operating, is not exceeded, except during periods of startup...
40 CFR 63.1346 - Operating limits for kilns.
Code of Federal Regulations, 2014 CFR
2014-07-01
..., is not exceeded, except during periods of startup and shutdown when the temperature limit may be... not exceeded, except during periods of startup/shutdown when the temperature limit may be exceeded by... periods of startup/shutdown when the temperature limit may be exceeded by no more than 10 percent. (b) The...
Code of Federal Regulations, 2010 CFR
2010-10-01
... for contracts not to exceed the simplified acquisition threshold. 1436.602-5 Section 1436.602-5... for contracts not to exceed the simplified acquisition threshold. At each occurrence, CO approval...-engineer contracts not expected to exceed the simplified acquisition threshold. ...
Code of Federal Regulations, 2010 CFR
2010-07-01
... exceed 35 pages, and reply briefs shall not exceed 15 pages. A brief of an amicus curiae shall not exceed 25 pages. A brief of an intervenor shall not exceed the page limitation applicable to the party whose position it supports in affirming or reversing the Judge, or if a different position is taken, such brief...
Code of Federal Regulations, 2012 CFR
2012-07-01
... exceed 35 pages, and reply briefs shall not exceed 15 pages. A brief of an amicus curiae shall not exceed 25 pages. A brief of an intervenor shall not exceed the page limitation applicable to the party whose position it supports in affirming or reversing the Judge, or if a different position is taken, such brief...
Code of Federal Regulations, 2013 CFR
2013-07-01
... exceed 35 pages, and reply briefs shall not exceed 15 pages. A brief of an amicus curiae shall not exceed 25 pages. A brief of an intervenor shall not exceed the page limitation applicable to the party whose position it supports in affirming or reversing the Judge, or if a different position is taken, such brief...
21 CFR 172.892 - Food starch-modified.
Code of Federal Regulations, 2010 CFR
2010-04-01
... phosphorus. 1-Octenyl succinic anhydride, not to exceed 3 percent 1-Octenyl succinic anhydride, not to exceed... beverage bases as defined in § 170.3(n)(3) of this chapter. Phosphorus oxychloride, not to exceed 0.1 percent Phosphorus oxychloride, not to exceed 0.1 percent, followed by either acetic anhydride, not to...
21 CFR 172.892 - Food starch-modified.
Code of Federal Regulations, 2011 CFR
2011-04-01
... phosphorus. 1-Octenyl succinic anhydride, not to exceed 3 percent 1-Octenyl succinic anhydride, not to exceed... beverage bases as defined in § 170.3(n)(3) of this chapter. Phosphorus oxychloride, not to exceed 0.1 percent Phosphorus oxychloride, not to exceed 0.1 percent, followed by either acetic anhydride, not to...
7 CFR 247.11 - Applicants exceed caseload levels.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 4 2010-01-01 2010-01-01 false Applicants exceed caseload levels. 247.11 Section 247... exceed caseload levels. (a) What must the local agency do if the number of applicants exceeds the local agency's caseload level? If all caseload has been filled, the local agency must maintain a waiting list...
Code of Federal Regulations, 2012 CFR
2012-01-01
... meeting or exceeding greater notification threshold (as adjusted). 802.21 Section 802.21 Commercial... meeting or exceeding greater notification threshold (as adjusted). (a) An acquisition of voting securities... of the acquiring person to meet or exceed a notification threshold (as adjusted) greater than the...
Code of Federal Regulations, 2011 CFR
2011-01-01
... meeting or exceeding greater notification threshold (as adjusted). 802.21 Section 802.21 Commercial... meeting or exceeding greater notification threshold (as adjusted). (a) An acquisition of voting securities... of the acquiring person to meet or exceed a notification threshold (as adjusted) greater than the...
Code of Federal Regulations, 2010 CFR
2010-01-01
... meeting or exceeding greater notification threshold (as adjusted). 802.21 Section 802.21 Commercial... meeting or exceeding greater notification threshold (as adjusted). (a) An acquisition of voting securities... of the acquiring person to meet or exceed a notification threshold (as adjusted) greater than the...
NASA Astrophysics Data System (ADS)
Gunning, Brendan P.; Fabien, Chloe A. M.; Merola, Joseph J.; Clinton, Evan A.; Doolittle, W. Alan; Wang, Shuo; Fischer, Alec M.; Ponce, Fernando A.
2015-01-01
The bulk and 2-dimensional (2D) electrical transport properties of heavily Mg-doped p-type GaN films grown on AlN buffer layers by Metal Modulated Epitaxy are explored. Distinctions are made between three primary p-type conduction mechanisms: traditional valence band conduction, impurity band conduction, and 2D conduction within a 2D hole gas at a hetero-interface. The bulk and 2D contributions to the overall carrier transport are identified and the relative contributions are found to vary strongly with growth conditions. Films grown with III/V ratio less than 1.5 exhibit high hole concentrations exceeding 2 × 1019 cm-3 with effective acceptor activation energies of 51 meV. Films with III/V ratios greater than 1.5 exhibit lower overall hole concentrations and significant contributions from 2D transport at the hetero-interface. Films grown with III/V ratio of 1.2 and Mg concentrations exceeding 2 × 1020 cm-3 show no detectable inversion domains or Mg precipitation. Highly Mg-doped p-GaN and p-AlGaN with Al fractions up to 27% similarly exhibit hole concentrations exceeding 2 × 1019 cm-3. The p-GaN and p-Al0.11Ga0.89N films show broad ultraviolet (UV) photoluminescence peaks, which intercept the valence band, supporting the presence of a Mg acceptor band. Finally, a multi-quantum-well light-emitting diode (LED) and p-i-n diode are grown, both of which demonstrate rectifying behavior with turn-on voltages of 3-3.5 V and series resistances of 6-10 Ω without the need for any post-metallization annealing. The LED exhibits violet-blue luminescence at 425 nm, while the p-i-n diode shows UV luminescence at 381 nm, and both devices still show substantial light emission even when submerged in liquid nitrogen at 77 K.
Havelaar, Arie H; Vazquez, Kathleen M; Topalcengiz, Zeynal; Muñoz-Carpena, Rafael; Danyluk, Michelle D
2017-10-09
The U.S. Food and Drug Administration (FDA) has defined standards for the microbial quality of agricultural surface water used for irrigation. According to the FDA produce safety rule (PSR), a microbial water quality profile requires analysis of a minimum of 20 samples for Escherichia coli over 2 to 4 years. The geometric mean (GM) level of E. coli should not exceed 126 CFU/100 mL, and the statistical threshold value (STV) should not exceed 410 CFU/100 mL. The water quality profile should be updated by analysis of a minimum of five samples per year. We used an extensive set of data on levels of E. coli and other fecal indicator organisms, the presence or absence of Salmonella, and physicochemical parameters in six agricultural irrigation ponds in West Central Florida to evaluate the empirical and theoretical basis of this PSR. We found highly variable log-transformed E. coli levels, with standard deviations exceeding those assumed in the PSR by up to threefold. Lognormal distributions provided an acceptable fit to the data in most cases but may underestimate extreme levels. Replacing censored data with the detection limit of the microbial tests underestimated the true variability, leading to biased estimates of GM and STV. Maximum likelihood estimation using truncated lognormal distributions is recommended. Twenty samples are not sufficient to characterize the bacteriological quality of irrigation ponds, and a rolling data set of five samples per year used to update GM and STV values results in highly uncertain results and delays in detecting a shift in water quality. In these ponds, E. coli was an adequate predictor of the presence of Salmonella in 150-mL samples, and turbidity was a second significant variable. The variability in levels of E. coli in agricultural water was higher than that anticipated when the PSR was finalized, and more detailed information based on mechanistic modeling is necessary to develop targeted risk management strategies.
A study of surface ozone variability over the Iberian Peninsula during the last fifty years
NASA Astrophysics Data System (ADS)
Fernández-Fernández, M. I.; Gallego, M. C.; García, J. A.; Acero, F. J.
2011-02-01
There is good evidence for an increase in the global surface level of ozone in the past century. In this work we present an analysis of 18 surface ozone series over the Iberian Peninsula, considering the target values of ozone for the protection of human health and for the protection of vegetation, as well as the information and alert thresholds established by the current European Directive on ambient air quality and cleaner air for Europe (Directive 2008/50/EC). The results show that the stations located on the Cantabrian coast exceeded neither the target value for the protection of human health nor the target value for the protection of vegetation. The information threshold was exceeded in most of the stations, while the alert threshold was only exceeded in one. The seasonal and daily evolution of ozone concentrations were as expected. A trend analysis of three surface ozone concentration indices (monthly median and 98th percentile, and monthly maximum of the daily maximum 8-h mean) was performed both for the whole period of each station and for the common period from 2001 to 2007 for all the months of the year. It was noted that generally the south of the Iberian Peninsula presented increasing trends for the three indices, especially in the last six months of the year, and the north decreasing trends. Finally, a correlation analysis was performed between the daily maximum 8-h mean and both daily mean temperature and daily mean solar radiation for the whole and the common periods. For all stations, there was a significant positive association at a 5% significance level between the daily maximum 8-h mean and the two meteorological variables of up to approximately 0.5. The spatial distribution of these association values from 2001 to 2007 showed a positive northwest to southeast gradient over the Iberian Peninsula.
Olson, Scott A.; with a section by Veilleux, Andrea G.
2014-01-01
This report provides estimates of flood discharges at selected annual exceedance probabilities (AEPs) for streamgages in and adjacent to Vermont and equations for estimating flood discharges at AEPs of 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent (recurrence intervals of 2-, 5-, 10-, 25-, 50-, 100-, 200-, and 500-years, respectively) for ungaged, unregulated, rural streams in Vermont. The equations were developed using generalized least-squares regression. Flood-frequency and drainage-basin characteristics from 145 streamgages were used in developing the equations. The drainage-basin characteristics used as explanatory variables in the regression equations include drainage area, percentage of wetland area, and the basin-wide mean of the average annual precipitation. The average standard errors of prediction for estimating the flood discharges at the 50-, 20-, 10-, 4-, 2-, 1-, 0.5-, and 0.2-percent AEP with these equations are 34.9, 36.0, 38.7, 42.4, 44.9, 47.3, 50.7, and 55.1 percent, respectively. Flood discharges at selected AEPs for streamgages were computed by using the Expected Moments Algorithm. To improve estimates of the flood discharges for given exceedance probabilities at streamgages in Vermont, a new generalized skew coefficient was developed. The new generalized skew for the region is a constant, 0.44. The mean square error of the generalized skew coefficient is 0.078. This report describes a technique for using results from the regression equations to adjust an AEP discharge computed from a streamgage record. This report also describes a technique for using a drainage-area adjustment to estimate flood discharge at a selected AEP for an ungaged site upstream or downstream from a streamgage. The final regression equations and the flood-discharge frequency data used in this study will be available in StreamStats. StreamStats is a World Wide Web application providing automated regression-equation solutions for user-selected sites on streams.
Creep and fracture of dispersion-strengthened materials
NASA Technical Reports Server (NTRS)
Raj, Sai V.
1991-01-01
The creep and fracture of dispersion strengthened materials is reviewed. A compilation of creep data on several alloys showed that the reported values of the stress exponent for creep varied between 3.5 and 100. The activation energy for creep exceeded that for lattice self diffusion in the matrix in the case of some materials and a threshold stress behavior was generally reported in these instances. The threshold stress is shown to be dependent on the interparticle spacing and it is significantly affected by the initial microstructure. The effect of particle size and the nature of the dispersoid on the threshold stress is not well understood at the present time. In general, most studies indicate that the microstructure after creep is similar to that before testing and very few dislocations are usually observed. It is shown that the stress acting on a dispersoid due to a rapidly moving dislocation can exceed the particle yield strength of the G sub p/1000, where G sub p is the shear modulus of the dispersoid. The case when the particle deforms is examined and it is suggested that the dislocation creep threshold stress of the alloy is equal to the yield strength of the dispersoid under these conditions. These results indicate that the possibility that the dispersoid creep threshold stress is determined by either the particle yield strength or the stress required to detach a dislocation from the dispersoid matrix interface. The conditions under which the threshold stress is influenced by one or the other mechanism are discussed and it is shown that the particle yield strength is important until the extent of dislocation core relaxation at the dispersoid matrix interface exceeds about 25 pct. depending on the nature of the particle matrix combination. Finally, the effect of grain boundaries and grain morphology on the creep and fracture behavior of dispersoid strengthened alloys is examined.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1982-01-01
The WyCoal Project Village is a housing facility proposed adjacent to the Wyoming Coal Gasification Project plant construction site that would accommodate single workers in dormitory units and singles or couples at a recreation vehicle park. Centralized services and recreational facilities are also to be provided. The provision for some mobile home units to be used in lieu of RV spaces has been considered but would be developed only if a strong demonstrated demand from singles and couples required such a provision. No children will be allowed at the Project Village as accommodations for families will be available in themore » town of Douglas. The development program for the Project Village calls for a total plan capacity of 225 living units: 1500 dormitory rooms and 750 recreational vehicle spaces. However, the total units to be developed will not exceed 1800 with peak employment, including couples at the Recreational Vehicle Park, not anticipated to exceed 2000. The flexibility within the maximum plan capacity of 2250 will allow for the development of an appropriate balance of housing units geared to the on-site project demands as plant construction occurs. At this time a mix of approximately 1200 dormitory rooms and 600 RV spaces appears appropriate for planning purposes.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bova, Valentina; Miraglia, Roberto, E-mail: rmiraglia@ismett.edu; Maruzzelli, Luigi
2013-04-15
This study was designed to analyze the clinical results in patients suitable for liver transplantation with hepatocellular carcinoma (HCC) who exceeded Milan criteria, which underwent intra-arterial therapies (IAT), to determine predictive factors of successful downstaging. A total of 277 consecutive patients with cirrhosis and HCC were treated by IAT (transarterial oily chemoembolization, transarterial chemoembolization, transarterial embolization) in a single center. Eighty patients exceed the Milan criteria. Patients with infiltrative HCC, hypovascular HCC, and portal vein thrombosis were excluded, with a final study population of 48 patients. Tumor response to IAT was evaluated with CT and/or MRI according to modified RECISTmore » criteria. Successful downstaging was defined as a reduction in the number and size of viable tumors to within the Milan criteria, and serum alpha-fetoprotein (AFP) <100 ng/mL, for at least 6 months. Nineteen patients (39 %) had their tumors successfully downstaged; 29 patients (61 %) did not. Multivariate analysis showed that AFP level <100 ng/mL and 3-year calculated survival probability using the Metroticket calculator were the only independent predictors of successful downstaging (p < 0.023 and p < 0.049 respectively). Biological characteristics of HCC as AFP levels <100 ng/mL and high 3-year calculated survival probability may predict a good response to downstage after IAT.« less
AlN/GaN heterostructures grown by metal organic vapor phase epitaxy with in situ Si 3N 4 passivation
NASA Astrophysics Data System (ADS)
Cheng, Kai; Degroote, S.; Leys, M.; Medjdoub, F.; Derluyn, J.; Sijmus, B.; Germain, M.; Borghs, G.
2011-01-01
AlN/GaN heterostructures are very attractive because their theoretical two-dimensional electron gas (2DEG) density may exceed 5×10 13/cm 2[1]. However, there are very few reports on AlN/GaN heterostructures grown by MOVPE. In this work, we show that good quality AlN layers can be grown on GaN at a relatively low growth temperature when TMIn is added to the carrier gas flow as a surfactant. Analysis by RBS revealed that at a growth temperature of 900 °C or higher no Indium is actually incorporated. Various thicknesses of AlN are grown, from 2 to 8 nm. Finally, 2-3 nm in situ Si 3N 4 is deposited in order to protect the AlN surface and thus prevent stress relaxation. AFM revealed that the root-mean-square (RMS) roughness in a 1×1 μm 2 area is 0.25 nm. When the AlN thickness reaches 8 nm, the sheet resistance can be as low as 186±3 Ω/□. Van der Pauw-Hall measurements show that the electron density is about 2.5×10 13/cm 2 with electron mobility exceeding 1140 cm 2/V s when extra 50 nm PECVD SiN is deposited.
Kink modes and surface currents associated with vertical displacement events
NASA Astrophysics Data System (ADS)
Manickam, Janardhan; Boozer, Allen; Gerhardt, Stefan
2012-08-01
The fast termination phase of a vertical displacement event (VDE) in a tokamak is modeled as a sequence of shrinking equilibria, where the core current profile remains constant so that the safety-factor at the axis, qaxis, remains fixed and the qedge systematically decreases. At some point, the n = 1 kink mode is destabilized. Kink modes distort the magnetic field lines outside the plasma, and surface currents are required to nullify the normal component of the B-field at the plasma boundary and maintain equilibrium at finite pressure. If the plasma touches a conductor, the current can be transferred to the conductor, and may be measurable by the halo current monitors. This report describes a practical method to model the plasma as it evolves during a VDE, and determine the surface currents, needed to maintain equilibrium. The main results are that the onset conditions for the disruption are that the growth-rate of the n = 1 kink exceeds half the Alfven time and the associated surface current needed to maintain equilibrium exceeds one half of the core plasma current. This occurs when qedge drops below a low integer, usually 2. Application to NSTX provides favorable comparison with non-axisymmetric halo-current measurements. The model is also applied to ITER and shows that the 2/1 mode is projected to be the most likely cause of the final disruption.
Pacheco Coello, Ricardo; Pestana Justo, Jorge; Factos Mendoza, Andrés; Santos Ordoñez, Efrén
2017-12-20
In Ecuador, food products need to be labeled if exceeded 0.9% of transgenic content in whole products. For the detection of genetically modified organisms (GMOs), three DNA extraction methods were tested in 35 food products commercialized in Ecuador. Samples with positive amplification of endogenous genes were screened for the presence of the Cauliflower mosaic virus 35S-promoter (P35S) and the nopaline synthase-terminator (Tnos). TaqMan™ probes were used for determination of transgenic content of the GTS 40-3-2 and MON810 events through quantitative PCR (qPCR). Twenty-six processed food samples were positive for the P35S alone and eight samples for the Tnos and P35S. Absolute qPCR results indicated that eleven samples were positive for GTS 40-3-2 specific event and two for MON810 specific event. A total of nine samples for events GTS 40-3-2 and MON810 exceeded the umbral allowed of transgenic content in the whole food product with the specific events. Different food products may require different DNA extraction protocols for GMO detection through PCR. Among the three methods tested, the DNeasy mericon food kit DNA extraction method obtained higher proportion of amplified endogenous genes through PCR. Finally, event-specific GMOs were detected in food products in Ecuador.
Extra-high voltage transmission lines: mechanisms of biological effects on honeybees. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Greenberg, B.; Bindokas, V.
1985-08-01
The authors confirmed that bee exposure to E fields, including 100 kV/m, under the dry conditions cause no detectable effect on colony behavior. If, however, exposure occurs when moisture is present, or if bees are on a conductive surface, they become visibly disturbed, mortality is increased, abnormal propolization occurs, and colony development may be impaired. It seems plausible that bees on conductive surfaces within a hive under a 765-kV/m transmission line can perceive shocks from body currents induced by enhanced intra-hive E fields. Hives exposed under a 765-kV/m transmission line to an ambient E field of 7 kV/m have internalmore » step-potential-induced currents and interchamber chort-circuit currents which range from one-half to several microamperes. Total hive currents can exceed 100 ..mu..A. Thus, induced hive currents exceed the empirical sting threshold by up to a factor of 100 and the E-field-induced body current by up to a factor of 1000. The degree of disturbance which could be produced by these intra-hive currents will eclipse that produced by perception of E-field-induced body currents. The authors therefore attribute the disturbance of colonies under a transmission line primarily to electric shock from induced hive currents. 10 refs., 51 figs., 18 tabs. (DT)« less
30 CFR 77.215 - Refuse piles; construction requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... on a pile shall be spread in layers and compacted in such a manner so as to minimize the flow of air... constructed in compacted layers not exceeding 2 feet in thickness and shall not have any slope exceeding 2... refuse pile in compacted layers exceeding 2 feet in thickness and with slopes exceeding 27° where...
14 CFR 27.1505 - Never-exceed speed.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Never-exceed speed. 27.1505 Section 27.1505... Never-exceed speed. (a) The never-exceed speed, VNE, must be established so that it is— (1) Not less than 40 knots (CAS); and (2) Not more than the lesser of— (i) 0.9 times the maximum forward speeds...
14 CFR 27.1505 - Never-exceed speed.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Never-exceed speed. 27.1505 Section 27.1505... Never-exceed speed. (a) The never-exceed speed, VNE, must be established so that it is— (1) Not less than 40 knots (CAS); and (2) Not more than the lesser of— (i) 0.9 times the maximum forward speeds...
Code of Federal Regulations, 2012 CFR
2012-10-01
... for contracts not to exceed the simplified acquisition threshold. 636.602-5 Section 636.602-5 Federal... not to exceed the simplified acquisition threshold. The short selection process described in FAR 36.602-5 is authorized for use for contracts not expected to exceed the simplified acquisition threshold...
Code of Federal Regulations, 2010 CFR
2010-10-01
... for contracts not to exceed the simplified acquisition threshold. 1336.602-5 Section 1336.602-5... for contracts not to exceed the simplified acquisition threshold. (a) In contracts not expected to exceed the simplified acquisition threshold, either or both of the short selection processes set out at...
A method for estimating mean and low flows of streams in national forests of Montana
Parrett, Charles; Hull, J.A.
1985-01-01
Equations were developed for estimating mean annual discharge, 80-percent exceedance discharge, and 95-percent exceedance discharge for streams on national forest lands in Montana. The equations for mean annual discharge used active-channel width, drainage area and mean annual precipitation as independent variables, with active-channel width being most significant. The equations for 80-percent exceedance discharge and 95-percent exceedance discharge used only active-channel width as an independent variable. The standard error or estimate for the best equation for estimating mean annual discharge was 27 percent. The standard errors of estimate for the equations were 67 percent for estimating 80-percent exceedance discharge and 75 percent for estimating 95-percent exceedance discharge. (USGS)
Antosh, Ivan J; Svoboda, Steven J; Peck, Karen Y; Garcia, E'Stephan J; Cameron, Kenneth L
2018-06-01
Several studies have examined changes in patient-reported outcome measures (PROMs) after anterior cruciate ligament (ACL) injury, but no studies to date have prospectively evaluated changes from preinjury baseline through injury and follow-up among ACL-injured patients compared to the baseline and follow-up changes of uninjured patients. To examine changes in PROMs over time from preinjury baseline to at least 2 years after ACL reconstruction and to compare these changes with those of an uninjured control group having similar physical activity requirements. Cohort study; Level of evidence, 2. The authors conducted a prospective cohort study with a nested case-control analysis at a US service academy. All incoming first year students were recruited to participate in this study. Consenting participants completed a baseline questionnaire that included the KOOS (Knee injury and Osteoarthritis Outcome Score), WOMAC (Western Ontario and McMaster Universities Osteoarthritis Index), and MARS (Marx Activity Rating Scale). Participants who sustained a subsequent ACL injury completed assessments at the time of surgery and at 6, 12, and 24 months after surgery. Healthy participants were recruited to repeat the baseline assessments within 1 year of graduation. Inter- and intragroup differences at these time points were evaluated with dependent and independent t tests, respectively. We also compared these results with established minimum clinically important difference (MCID) values. Of 1268 first year students entering the academy, 1005 with no previous injuries consented to participate in this study (82% male, mean ± SD age 19 ± 1 years). Of those enrolled, 30 suffered an ACL injury and met the inclusion criteria for this study. Ninety uninjured control students who met the inclusion criteria completed follow-up assessments. There were statistically significant differences across all KOOS and WOMAC subscales between ACL-injured group and uninjured group at the time of the final follow-up assessment. Four KOOS subscales (Pain, Symptoms, Sports and Recreation Function, and Knee-Related Quality of Life) and the WOMAC Stiffness subscale demonstrated >8-point differences between groups, which exceeded the established MCID for these instruments. There were no significant differences between the ACL-injured group and uninjured groups noted for the MARS ( P = .635). At the time of final follow-up, the ACL-injured group also reported significant deficits on the WOMAC Stiffness subscale ( P = .032), the MARS ( P = .030), and all KOOS subscales, with the exception of Functional Activities of Daily Living, as compared with their preinjury baseline scores. These deficits exceeded the established MCID values for 3 KOOS subscales and the MARS. Patients with ACL injuries reported significant deficits on PROMs at least 2 years after surgical reconstruction in relation to preinjury baseline scores and an uninjured control group. Many of these deficits exceeded established MCID values.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-23
... recorded in EPA's Air Quality System (AQS) database. To account for missing data, the procedures found in... Site Year exceedance exceedance expected days over days for exceedance 0.124 ppm missing data rate... for exceedance 0.124 ppm missing data rate 090050006 Cornwall........ 2006 0 0.0 0.3 2007 1 1.0 2008 0...
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 24 2013-07-01 2013-07-01 false Special notice for nitrate exceedances... Drinking Water Violations § 141.209 Special notice for nitrate exceedances above MCL by non-community water... primacy agency under § 141.11(d) to exceed the nitrate MCL must provide notice to persons served according...
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 23 2011-07-01 2011-07-01 false Special notice for nitrate exceedances... Water Violations § 141.209 Special notice for nitrate exceedances above MCL by non-community water... primacy agency under § 141.11(d) to exceed the nitrate MCL must provide notice to persons served according...
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 24 2012-07-01 2012-07-01 false Special notice for nitrate exceedances... Water Violations § 141.209 Special notice for nitrate exceedances above MCL by non-community water... primacy agency under § 141.11(d) to exceed the nitrate MCL must provide notice to persons served according...
14 CFR 29.1505 - Never-exceed speed.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Never-exceed speed. 29.1505 Section 29.1505....1505 Never-exceed speed. (a) The never-exceed speed, V NE, must be established so that it is— (1) Not less than 40 knots (CAS); and (2) Not more than the lesser of— (i) 0.9 times the maximum forward speeds...
14 CFR 29.1505 - Never-exceed speed.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Never-exceed speed. 29.1505 Section 29.1505....1505 Never-exceed speed. (a) The never-exceed speed, V NE, must be established so that it is— (1) Not less than 40 knots (CAS); and (2) Not more than the lesser of— (i) 0.9 times the maximum forward speeds...
Recommended Changes to Interval Management to Achieve Operational Implementation
NASA Technical Reports Server (NTRS)
Baxley, Brian; Swieringa, Kurt; Roper, Roy; Hubbs, Clay; Goess, Paul; Shay, Richard
2017-01-01
A 19-day flight test of an Interval Management (IM) avionics prototype was conducted in Washington State using three aircraft to precisely achieve and maintain a spacing interval behind the preceding aircraft. NASA contracted with Boeing, Honeywell, and United Airlines to build this prototype, and then worked closely with them, the FAA, and other industry partners to test this prototype in flight. Four different IM operation types were investigated during this test in the en route, arrival, and final approach phases of flight. Many of the IM operations met or exceeded the design goals established prior to the test. However, there were issues discovered throughout the flight test, including the rate and magnitude of IM commanded speed changes and the difference between expected and actual aircraft deceleration rates.
Designing graphene absorption in a multispectral plasmon-enhanced infrared detector
Goldflam, Michael D.; Fei, Zhe; Ruiz, Isaac; ...
2017-05-18
Here, we have examined graphene absorption in a range of graphene-based infrared devices that combine either monolayer or bilayer graphene with three different gate dielectrics. Electromagnetic simulations show that the optical absorption in graphene in these devices, an important factor in a functional graphene-based detector, is strongly dielectric-dependent. Our simulations reveal that plasmonic excitation in graphene can significantly influence the percentage of light absorbed in the entire device, as well as the graphene layer itself, with graphene absorption exceeding 25% in regions where plasmonic excitation occurs. Notably, the dielectric environment of graphene has a dramatic influence on the strength andmore » wavelength range over which the plasmons can be excited, making dielectric choice paramount to final detector tunability and sensitivity.« less
Characterization and classification of South American land cover types using satellite data
NASA Technical Reports Server (NTRS)
Townshend, J. R. G.; Justice, C. O.; Kalb, V.
1987-01-01
Various methods are compared for carrying out land cover classifications of South America using multitemporal Advanced Very High Resolution Radiometer data. Fifty-two images of the normalized difference vegetation index (NDVI) from a 1-year period are used to generate multitemporal data sets. Three main approaches to land cover classification are considered, namely the use of the principal components transformed images, the use of a characteristic curves procedure based on NDVI values plotted against time, and finally application of the maximum likelihood rule to multitemporal data sets. Comparison of results from training sites indicates that the last approach yields the most accurate results. Despite the reliance on training site figures for performance assessment, the results are nevertheless extremely encouraging, with accuracies for several cover types exceeding 90 per cent.
Effect of silane dilution on intrinsic stress in glow discharge hydrogenated amorphous silicon films
NASA Astrophysics Data System (ADS)
Harbison, J. P.; Williams, A. J.; Lang, D. V.
1984-02-01
Measurements of the intrinsic stress in hydrogenated amorphous silicon (a-Si : H) films grown by rf glow discharge decomposition of silane diluted to varying degrees in argon are presented. Films are found to grow under exceedingly high compressive stress. Low values of macroscopic film density and low stress values are found to correlate with high growth rate. An abrupt drop in stress occurs between 2 and 3% silane at precisely the point where columnar growth morphology appears. No corresponding abrupt change is noted in density, growth rate, or plasma species concentrations as determined by optical emissioin spectroscopy. Finally a model of diffusive incorporation of hydrogen or some gaseous impurity during growth into the bulk of the film behind the growing interface is proposed to explain the results.
Cooper, A J; Sandhu, S; Losztyn, S; Cernovsky, Z
1992-12-01
Seven of ten pedophiles in hospital completed a double-blind, placebo-controlled two-dose comparison of medroxyprogesterone acetate and cyproterone acetate. Sequential measures during the 28 week study were: patient self-reports, nurses' observations, phallometry, hormone levels and side-effects. The drugs, which performed equivalently, reduced sexual thoughts and fantasies, the frequency of early morning erections on awakening, the frequency and pleasure of masturbation, and level of sexual frustration. Penile responses were also reduced but to a lesser degree and were more variable. Serum testosterone FSH and LH all declined during drug administration, but by the end of the final placebo phase had essentially returned to (or exceeded) pre-drug values. Our experience suggests that only a minority of pedophiles are likely to accept libido-reducing drugs.
Neural stimulation for Parkinson's disease: current therapies and future directions.
Neimat, Joseph S; Hamani, Clement; Lozano, Andres M
2006-01-01
Neural stimulation has rapidly become an integral tool in the treatment of Parkinson's disease and other movement disorders. Today it serves as an important adjunct to medical therapy that continues to gain applicability to patients in whom the disease has progressed significantly. Studies have demonstrated efficacy in several deep-brain targets, with prolonged benefit exceeding 5-year follow-up times. Continuing study is teaching us more about the mechanism of deep-brain stimulation effect. New targets, which may treat the disease more successfully, are being examined. In this review, the history of deep-brain stimulation, the rationale for the known targets of stimulation; the clinical evidence demonstrating their benefit and, finally, future perspectives on new treatments that are being investigated and may have an impact on the field are discussed.
[Quality assurance of fine-needle aspiration cytology of the organized mammography screening].
Bak, Mihály; Konyár, Eva; Schneider, Ferenc; Bidlek, Mária; Szabó, Eva; Nyári, Tibor; Godény, Mária; Kásler, Miklós
2010-08-08
The National Public Health Program has established the organized mammography screening in Hungary. The aim of our study was to determine the quality assurance of breast aspiration cytology. Cytology results were rated to 5 categories (C1, C2, C3, C4 and C5). All cytology reports were compared with the final histology diagnosis. 1361 women had aspiration cytology diagnosis performed from a total of 47718 mammography non-negative lesions. There were 805 (59.1%) benign and 187 (13.7%) malignant alterations. Sensitivity was 91%, specificity 88%, positive predictive value 96.6% and negative predictive value turned to be 71% (p<0.001). The auditing values of fine needle aspiration cytology in our laboratory meet, or in certain aspects exceed the proposed minimum threshold values.
Too good to be true: publication bias in two prominent studies from experimental psychology.
Francis, Gregory
2012-04-01
Empirical replication has long been considered the final arbiter of phenomena in science, but replication is undermined when there is evidence for publication bias. Evidence for publication bias in a set of experiments can be found when the observed number of rejections of the null hypothesis exceeds the expected number of rejections. Application of this test reveals evidence of publication bias in two prominent investigations from experimental psychology that have purported to reveal evidence of extrasensory perception and to indicate severe limitations of the scientific method. The presence of publication bias suggests that those investigations cannot be taken as proper scientific studies of such phenomena, because critical data are not available to the field. Publication bias could partly be avoided if experimental psychologists started using Bayesian data analysis techniques.
Geostatistical risk estimation at waste disposal sites in the presence of hot spots.
Komnitsas, Kostas; Modis, Kostas
2009-05-30
The present paper aims to estimate risk by using geostatistics at the wider coal mining/waste disposal site of Belkovskaya, Tula region, in Russia. In this area the presence of hot spots causes a spatial trend in the mean value of the random field and a non-Gaussian data distribution. Prior to application of geostatistics, subtraction of trend and appropriate smoothing and transformation of the data into a Gaussian form were carried out; risk maps were then generated for the wider study area in order to assess the probability of exceeding risk thresholds. Finally, the present paper discusses the need for homogenization of soil risk thresholds regarding hazardous elements that will enhance reliability of risk estimation and enable application of appropriate rehabilitation actions in contaminated areas.
The chaotic regime of D-term inflation
NASA Astrophysics Data System (ADS)
Buchmüller, W.; Domcke, V.; Schmitz, K.
2014-11-01
We consider D-term inflation for small couplings of the inflaton to matter fields. Standard hybrid inflation then ends at a critical value of the inflaton field that exceeds the Planck mass. During the subsequent waterfall transition the inflaton continues its slow-roll motion, whereas the waterfall field rapidly grows by quantum fluctuations. Beyond the decoherence time, the waterfall field becomes classical and approaches a time-dependent minimum, which is determined by the value of the inflaton field and the self-interaction of the waterfall field. During the final stage of inflation, the effective inflaton potential is essentially quadratic, which leads to the standard predictions of chaotic inflation. The model illustrates how the decay of a false vacuum of GUT-scale energy density can end in a period of `chaotic inflation'.
Optical distribution of local oscillators in future telecommunication satellite payloads
NASA Astrophysics Data System (ADS)
Benazet, Benoît; Sotom, Michel; Maignan, Michel; Berthon, Jacques
2017-11-01
The distribution of high spectral purity reference signals over optical fibre in future telecommunication satellite payloads is presented. Several types of applications are considered, including the distribution of a reference frequency at 10 MHz (Ultra-Stable Reference Oscillator) as well as the distribution of a radiofrequency oscillator around 800 MHz (Master Local Oscillator). The results of both experimental and theoretical studies are reported. In order to meet phase noise requirements for the USRO distribution, the use of an optimised receiver circuit based on an optically synchronised oscillator is investigated. Finally, the optical distribution of microwave local oscillators at frequencies exceeding 20 GHz is described. Such a scheme paves the way to more advanced sub-systems involving optical frequency-mixing and optical transmission of microwave signals, with applications to multiple-beam active antennas.
Effects of Fe2O3 addition on the nitridation of silicon powder
NASA Technical Reports Server (NTRS)
Hasegawa, Y.; Inomata, Y.; Kijima, K.; Matsuyama, T.
1977-01-01
The reaction of silicon powder and nitrogen was studied in the range of 1300-1400 C. When an addition of Fe2O3 was more than 0.8wt%, the reaction was linear and compared to samples with no Fe2O3, the reaction velocity increased 5 to 10 times. The reactions were mediated by the process of peeling and cracking in a thin layer of Si2N4 formed on the silicon particles or on the surface of the Fe-Si melts. As the addition of Fe2O3 increased, the reaction activation energy for highly pure samples decreased. Fe2O3 which exceeded the Si3N4 solubility limits was finally converted to d-Fe.
Designing graphene absorption in a multispectral plasmon-enhanced infrared detector
DOE Office of Scientific and Technical Information (OSTI.GOV)
Goldflam, Michael D.; Fei, Zhe; Ruiz, Isaac
Here, we have examined graphene absorption in a range of graphene-based infrared devices that combine either monolayer or bilayer graphene with three different gate dielectrics. Electromagnetic simulations show that the optical absorption in graphene in these devices, an important factor in a functional graphene-based detector, is strongly dielectric-dependent. Our simulations reveal that plasmonic excitation in graphene can significantly influence the percentage of light absorbed in the entire device, as well as the graphene layer itself, with graphene absorption exceeding 25% in regions where plasmonic excitation occurs. Notably, the dielectric environment of graphene has a dramatic influence on the strength andmore » wavelength range over which the plasmons can be excited, making dielectric choice paramount to final detector tunability and sensitivity.« less
Adaptive aperture for Geiger mode avalanche photodiode flash ladar systems.
Wang, Liang; Han, Shaokun; Xia, Wenze; Lei, Jieyu
2018-02-01
Although the Geiger-mode avalanche photodiode (GM-APD) flash ladar system offers the advantages of high sensitivity and simple construction, its detection performance is influenced not only by the incoming signal-to-noise ratio but also by the absolute number of noise photons. In this paper, we deduce a hyperbolic approximation to estimate the noise-photon number from the false-firing percentage in a GM-APD flash ladar system under dark conditions. By using this hyperbolic approximation function, we introduce a method to adapt the aperture to reduce the number of incoming background-noise photons. Finally, the simulation results show that the adaptive-aperture method decreases the false probability in all cases, increases the detection probability provided that the signal exceeds the noise, and decreases the average ranging error per frame.
Adaptive aperture for Geiger mode avalanche photodiode flash ladar systems
NASA Astrophysics Data System (ADS)
Wang, Liang; Han, Shaokun; Xia, Wenze; Lei, Jieyu
2018-02-01
Although the Geiger-mode avalanche photodiode (GM-APD) flash ladar system offers the advantages of high sensitivity and simple construction, its detection performance is influenced not only by the incoming signal-to-noise ratio but also by the absolute number of noise photons. In this paper, we deduce a hyperbolic approximation to estimate the noise-photon number from the false-firing percentage in a GM-APD flash ladar system under dark conditions. By using this hyperbolic approximation function, we introduce a method to adapt the aperture to reduce the number of incoming background-noise photons. Finally, the simulation results show that the adaptive-aperture method decreases the false probability in all cases, increases the detection probability provided that the signal exceeds the noise, and decreases the average ranging error per frame.
MM T for linear resonant cooler. Volume 1. Final report, October 1984-September 1986
DOE Office of Scientific and Technical Information (OSTI.GOV)
Narayan, R.; Silvestro, J.
1988-02-16
The three-fold objectives of this contract were to: (1) enhance the producibility and performance of the prototype cooler design developed in a prior contract, (b) qualify the design to the target specification in the contract (basically the HD1045/UA B2 specification amended for 2,500 hour MTTF and low audible noise), and (c) develop and demonstrate a pilot production facility for the cooler. Technical difficulties and cost growth related to objectives (a) and (b) above precluded accomplishing (c) as part of this contract's activities. Nevertheless, performance within or exceeding all major requirements has been demonstrated, and the company is currently producing themore » cooler for use on a U.S. Air Force airborne IR system.« less
Abdo, A. A.
2009-05-04
Designed as a high-sensitivity gamma-ray observatory, the Fermi Large Area Telescope is also an electron detector with a large acceptance exceeding 2 m 2 sr at 300 GeV. Building on the gamma-ray analysis, we have developed in this paper an efficient electron detection strategy which provides sufficient background rejection for measurement of the steeply falling electron spectrum up to 1 TeV. Our high precision data show that the electron spectrum falls with energy as E -3.0 and does not exhibit prominent spectral features. Finally, interpretations in terms of a conventional diffusive model as well as a potential local extra componentmore » are briefly discussed.« less
Spacecraft optical disk recorder memory buffer control
NASA Technical Reports Server (NTRS)
Hodson, Robert F.
1993-01-01
This paper discusses the research completed under the NASA-ASEE summer faculty fellowship program. The project involves development of an Application Specific Integrated Circuit (ASIC) to be used as a Memory Buffer Controller (MBC) in the Spacecraft Optical Disk System (SODR). The SODR system has demanding capacity and data rate specifications requiring specialized electronics to meet processing demands. The system is being designed to support Gigabit transfer rates with Terabit storage capability. The complete SODR system is designed to exceed the capability of all existing mass storage systems today. The ASIC development for SODR consist of developing a 144 pin CMOS device to perform format conversion and data buffering. The final simulations of the MBC were completed during this summer's NASA-ASEE fellowship along with design preparations for fabrication to be performed by an ASIC manufacturer.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lieou, Charles K. C.; Daub, Eric G.; Guyer, Robert A.
In this paper, we model laboratory earthquakes in a biaxial shear apparatus using the Shear-Transformation-Zone (STZ) theory of dense granular flow. The theory is based on the observation that slip events in a granular layer are attributed to grain rearrangement at soft spots called STZs, which can be characterized according to principles of statistical physics. We model lab data on granular shear using STZ theory and document direct connections between the STZ approach and rate-and-state friction. We discuss the stability transition from stable shear to stick-slip failure and show that stick slip is predicted by STZ when the applied shearmore » load exceeds a threshold value that is modulated by elastic stiffness and frictional rheology. Finally, we also show that STZ theory mimics fault zone dilation during the stick phase, consistent with lab observations.« less
Code of Federal Regulations, 2011 CFR
2011-01-01
... substantially exceed the cost of using imported petroleum. 503.32 Section 503.32 Energy DEPARTMENT OF ENERGY... fuel supply at a cost which does not substantially exceed the cost of using imported petroleum. (a... alternate fuel supply at a cost which does not substantially exceed the cost of using imported petroleum. To...
Code of Federal Regulations, 2010 CFR
2010-01-01
... substantially exceed the cost of using imported petroleum. 503.32 Section 503.32 Energy DEPARTMENT OF ENERGY... fuel supply at a cost which does not substantially exceed the cost of using imported petroleum. (a... alternate fuel supply at a cost which does not substantially exceed the cost of using imported petroleum. To...
Flow analysis of metals in a municipal solid waste management system.
Jung, C H; Matsuto, T; Tanaka, N
2006-01-01
This study aimed to identify the metal flow in a municipal solid waste (MSW) management system. Outputs of a resource recovery facility, refuse derived fuel (RDF) production facility, carbonization facility, plastics liquefaction facility, composting facility, and bio-gasification facility were analyzed for metal content and leaching concentration. In terms of metal content, bulky and incombustible waste had the highest values. Char from a carbonization facility, which treats household waste, had a higher metal content than MSW incinerator bottom ash. A leaching test revealed that Cd and Pb in char and Pb in RDF production residue exceeded the Japanese regulatory criteria for landfilling, so special attention should be paid to final disposal of these substances. By multiplying metal content and the generation rate of outputs, the metal content of input waste to each facility was estimated. For most metals except Cr, the total contribution ratio of paper/textile/plastics, bulky waste, and incombustible waste was over 80%. Approximately 30% of Cr originated from plastic packaging. Finally, several MSW management scenarios showed that most metals are transferred to landfills and the leaching potential of metals to the environment is quite small.
Bajpai, Anurag; Kabra, Madhulika; Menon, P S N
2006-06-01
Diagnosis of 11beta-hydroxylase deficiency was made in a boy at the age of 2 1/2 years on the basis of peripheral precocious puberty, growth acceleration (height standard deviation score +4.4) with advanced skeletal maturation (bone age 8.4 years) and elevated deoxycortisol levels. Glucocorticoid supplementation led to normalization of blood pressure but was associated with progression to central precocious puberty and increase in bone age resulting in decrease in predicted adult height to 133.7 cm (target height 163 cm). The child was started on GnRH analog (triptorelin 3.75 mg every 28 days), which led to improvement in predicted adult height by 3.1 cm over 15 months. Addition of growth hormone (0.1 IU/kg/day) resulted in improvement in predicted adult height (151 cm) and height deficit (12 cm) over the next 3.6 years. Final height (151 cm) exceeded predicted height at the initiation of GnRH analog treatment by 17.3 cm. This report suggests that combination GH and GnRH analog treatment may be useful in improving height outcome in children with 11beta-hydroxylase deficiency and compromised final height.
Dynamics of social contagions with memory of nonredundant information
NASA Astrophysics Data System (ADS)
Wang, Wei; Tang, Ming; Zhang, Hai-Feng; Lai, Ying-Cheng
2015-07-01
A key ingredient in social contagion dynamics is reinforcement, as adopting a certain social behavior requires verification of its credibility and legitimacy. Memory of nonredundant information plays an important role in reinforcement, which so far has eluded theoretical analysis. We first propose a general social contagion model with reinforcement derived from nonredundant information memory. Then, we develop a unified edge-based compartmental theory to analyze this model, and a remarkable agreement with numerics is obtained on some specific models. We use a spreading threshold model as a specific example to understand the memory effect, in which each individual adopts a social behavior only when the cumulative pieces of information that the individual received from his or her neighbors exceeds an adoption threshold. Through analysis and numerical simulations, we find that the memory characteristic markedly affects the dynamics as quantified by the final adoption size. Strikingly, we uncover a transition phenomenon in which the dependence of the final adoption size on some key parameters, such as the transmission probability, can change from being discontinuous to being continuous. The transition can be triggered by proper parameters and structural perturbations to the system, such as decreasing individuals' adoption threshold, increasing initial seed size, or enhancing the network heterogeneity.
Getting a Kick Out of Numerical Relativity
NASA Technical Reports Server (NTRS)
2006-01-01
Operating ground-based gravitational wave detectors and a planned instrument in space are bringing about the new field of gravitational wave astronomy. A prime source for any of these observatories is the merger of a system of two black holes. Brought together by copious losses of gravitational-wave energy, these systems merge in a burst of energy with a peak power exceeding any electromagnetic source. Observations of these sources will generate a wealth of astrophysical information, and may provide an unparalleled probe of strong-field gravitational physics, but a full interpretation of the observations will require detailed predictions from General Relativity. I will discuss recent advances in numerical simulations of binary black hole systems which are generating dramatic progress in understanding binary black hole mergers. Recent achievements include the first simulations of binary black hole systems through several orbits and merger, leading to detailed predictions for the final portion of the gravitational radiation waveforms from equal-mass mergers. For unequal-mass mergers, it has recently become possible to measure the impulsive kick imparted to the final black hole, by the asymmetry of the merger radiation. These first results announce an accelerating wave of progress soon to come from the energetic field of numerical relativity.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ross, J.
2017-04-01
This white paper was requested by the Core Team (United States Department of Energy [USDOE], United States Environmental Protection Agency [USEPA], and South Carolina Department of Health and Environmental Control [SCDHEC]) at the P-Area Groundwater (PAGW) Operable Unit (OU) Scoping Meeting held in January 2017 to discuss recent data and potential alternatives in support of a focused Corrective Measures Study/Feasibility Study (CMS/FS). This white paper presents an overview of the problem, and a range of technical and administrative options for addressing the tritium contamination in groundwater and Steel Creek. As tritium cannot be treated practicably, alternatives are limited to mediamore » transfer, containment and natural attenuation principally relying on radioactive decay. Using other groundwater OU decisions involving tritium as precedent, Savannah River Nuclear Solutions (SRNS) recommends that final tritium alternatives be evaluated in a CMS/FS, understanding that the likely preferred remedy will include natural attenuation with land use controls (LUCs). This is based on the inability to significantly reduce tritium impact to Steel Creek using an engineered solution as compared to natural attenuation. The timing of this evaluation could be conducted concurrently with the final remedy evaluation for volatile organic compounds (VOCs).« less
Flow analysis of metals in a municipal solid waste management system
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jung, C.H.; Matsuto, T.; Tanaka, N.
2006-07-01
This study aimed to identify the metal flow in a municipal solid waste (MSW) management system. Outputs of a resource recovery facility, refuse derived fuel (RDF) production facility, carbonization facility, plastics liquefaction facility, composting facility, and bio-gasification facility were analyzed for metal content and leaching concentration. In terms of metal content, bulky and incombustible waste had the highest values. Char from a carbonization facility, which treats household waste, had a higher metal content than MSW incinerator bottom ash. A leaching test revealed that Cd and Pb in char and Pb in RDF production residue exceeded the Japanese regulatory criteria formore » landfilling, so special attention should be paid to final disposal of these substances. By multiplying metal content and the generation rate of outputs, the metal content of input waste to each facility was estimated. For most metals except Cr, the total contribution ratio of paper/textile/plastics, bulky waste, and incombustible waste was over 80%. Approximately 30% of Cr originated from plastic packaging. Finally, several MSW management scenarios showed that most metals are transferred to landfills and the leaching potential of metals to the environment is quite small.« less
Hamner, Heather C.; Tinker, Sarah C.; Berry, R.J.; Mulinare, Joe
2013-01-01
Background The Institute of Medicine set a tolerable upper intake level (UL) for usual daily total folic acid intake (1,000 µg). Less than 3% of US adults currently exceed the UL. Objective The objective of this study was to determine if folic acid fortification of corn masa flour would increase the percentage of the US population who exceed the UL. Design We used dietary intake data from NHANES 2001–2008 to estimate the percentage of adults and children who would exceed the UL if corn masa flour were fortified at 140 µg of folic acid/100 g. Results In 2001–2008, 2.5% of the US adult population (aged≥19 years) exceeded the UL, which could increase to 2.6% if fortification of corn masa flour occurred. With corn masa flour fortification, percentage point increases were small and not statistically significant for US adults exceeding the UL regardless of supplement use, sex, race/ethnicity, or age. Children aged 1–8 years, specifically supplement users, were the most likely to exceed their age-specific UL. With fortification of corn masa flour, there were no statistically significant increases in the percentage of US children who were exceeding their age-specific UL, and the percentage point increases were small. Conclusions Our results suggest that fortification of corn masa flour would not significantly increase the percentage of individuals who would exceed the UL. Supplement use was the main factor related to exceeding the UL with or without fortification of corn masa flour and within all strata of sex, race/ethnicity, and age group. PMID:23316130
Estimating soil moisture exceedance probability from antecedent rainfall
NASA Astrophysics Data System (ADS)
Cronkite-Ratcliff, C.; Kalansky, J.; Stock, J. D.; Collins, B. D.
2016-12-01
The first storms of the rainy season in coastal California, USA, add moisture to soils but rarely trigger landslides. Previous workers proposed that antecedent rainfall, the cumulative seasonal rain from October 1 onwards, had to exceed specific amounts in order to trigger landsliding. Recent monitoring of soil moisture upslope of historic landslides in the San Francisco Bay Area shows that storms can cause positive pressure heads once soil moisture values exceed a threshold of volumetric water content (VWC). We propose that antecedent rainfall could be used to estimate the probability that VWC exceeds this threshold. A major challenge to estimating the probability of exceedance is that rain gauge records are frequently incomplete. We developed a stochastic model to impute (infill) missing hourly precipitation data. This model uses nearest neighbor-based conditional resampling of the gauge record using data from nearby rain gauges. Using co-located VWC measurements, imputed data can be used to estimate the probability that VWC exceeds a specific threshold for a given antecedent rainfall. The stochastic imputation model can also provide an estimate of uncertainty in the exceedance probability curve. Here we demonstrate the method using soil moisture and precipitation data from several sites located throughout Northern California. Results show a significant variability between sites in the sensitivity of VWC exceedance probability to antecedent rainfall.
Flippin' Fluid Mechanics - Using Online Technology to Enhance the In-Class Learning Experience
NASA Astrophysics Data System (ADS)
Webster, D. R.; Majerich, D. M.
2013-11-01
This study provides an empirical analysis of using online technologies and team problem solving sessions to shift an undergraduate fluid mechanics course from a traditional lecture format to a collaborative learning environment. Students were from two consecutive semesters of the same course taught by the same professor. One group used online technologies and solved problems in class and the other did not. Out of class, the treatment group watched 72 short (11 minutes, average) video lectures covering course topics and example problems being solved. Three times a week students worked in teams of two to solve problems on desktop whiteboard tablets while the instructor and graduate assistants provided ``just-in-time'' tutoring. The number of team problems assigned during the semester exceeded 100. Weekly online homework was assigned to reinforce topics. The WileyPlus online system generated unique problem parameters for each student. The control group received three-50 minute weekly lectures. Data include three midterms and a final exam. Regression results indicate that controlling for all of the entered variables, for every one more problem solving session the student attended, the final grade was raised by 0.327 points. Thus, if a student participated in all 25 of the team problem solving sessions, the final grade would have been 8.2 points higher, a difference of nearly a grade. Using online technologies and teamwork appeared to result in improved achievement, but more research is needed to support these findings.
NASA Astrophysics Data System (ADS)
Bell, M. D.; Clark, C.; Blett, T.
2015-12-01
The response of a biological indicator to N deposition can indicate that an ecosystem has surpassed a critical load and is at risk of significant change. The importance of this exceedance is often difficult to digest by policy makers and public audiences if the change is not linked to a familiar ecosystem endpoint. A workshop was held to bring together scientists, resource managers, and policy makers with expertise in ecosystem functioning, critical loads, and economics in an effort to identify the ecosystem services impacted by air pollution. This was completed within the framework of the Final Ecosystem Goods and Services (FEGS) Classification System to produce a product that identified distinct interactions between society and the effects of nitrogen pollution. From each change in a biological indicator, we created multiple ecological production functions to identify the cascading effects of the change to a measureable ecosystem service that a user interacts with either by enjoying, consuming, or appreciating the good or service, or using it as an input in the human economy. This FEGS metric was then linked to a beneficiary group that interacts with the service. Chains detailing the links from the biological indicator to the beneficiary group were created for aquatic and terrestrial acidification and eutrophication at the workshop, and here we present a subset of the workshop results by highlighting for 9 different ecosystems affected by terrestrial eutrophication. A total of 213 chains that linked to 37 unique FEGS metrics and impacted 15 beneficiary groups were identified based on nitrogen deposition mediated changes to biological indicators. The chains within each ecosystem were combined in flow charts to show the complex, overlapping relationships among biological indicators, ecosystem services, and beneficiary groups. Strength of relationship values were calculated for each chain based on support for the link in the scientific literature. We produced the complex diagrams to provide details to scientists and experts, identify research gaps, and understand the complexity of critical load exceedances. We then simplified the flow charts into stories that could produce an emotional connection and resonate with a general audience. These stories are important steps to breach the gaps between science and policy.
The Impact of Exceeding TANF Time Limits on the Access to Healthcare of Low-Income Mothers.
Narain, Kimberly; Ettner, Susan
2017-01-01
The objective of this article is to estimate the relationship of exceeding Temporary Assistance for Needy Families (TANF) time limits, with health insurance, healthcare, and health outcomes. The authors use Heckman selection models that exploit variability in state time-limit duration and timing of policy implementation as identifying exclusion restrictions to adjust the effect estimates of exceeding time limits for possible correlations between the probability of exceeding time limits and unobservable factors influencing the outcomes. The authors find that exceeding time limits decreases the predicted probability of Medicaid coverage, increases the predicted probability of being uninsured, and decreases the predicted probability of annual medical provider contact.
Spillway sizing of large dams in Austria
NASA Astrophysics Data System (ADS)
Reszler, Ch.; Gutknecht, D.; Blöschl, G.
2003-04-01
This paper discusses the basic philosophy of defining and calculating design floods for large dams in Austria, both for the construction of new dams and for a re-assessment of the safety of existing dams. Currently the consensus is to choose flood peak values corresponding to a probability of exceedance of 2*10-4 for a given year. A two step procedure is proposed to estimate the design flood discharges - a rapid assessment and a detailed assessment. In the rapid assessment the design discharge is chosen as a constant multiple of flood values read from a map of regionalised floods. The safety factor or multiplier takes care of the uncertainties of the local estimation and the regionalisation procedure. If the current design level of a spillway exceeds the value so estimated, no further calculations are needed. Otherwise (and for new dams) a detailed assessment is required. The idea of the detailed assessment is to draw upon all existing sources of information to constrain the uncertainties. The three main sources are local flood frequency analysis, where flood data are available; regional flood estimation from hydrologically similar catchments; and rainfall-runoff modelling using design storms as inputs. The three values obtained by these methods are then assessed and weighted in terms of their reliability to facilitate selection of the design flood. The uncertainty assessment of the various methods is based on confidence intervals, estimates of regional heterogeneity, data availability and sensitivity analyses of the rainfall-runoff model. As the definition of the design floods discussed above is based on probability concepts it is also important to examine the excess risk, i.e. the possibility of the occurrence of a flood exceeding the design levels. The excess risk is evaluated based on a so called Safety Check Flood (SCF), similar to the existing practice in other countries in Europe. The SCF is a vehicle to analyse the damage potential of an event of this magnitude. This is to provide guidance for protective measures to dealing with very extreme floods. The SCF is used to check the vulnerability of the system with regard to structural stability, morphological effects, etc., and to develop alarm plans and disaster mitigation procedures. The basis for estimating the SCF are the uncertainty assessments of the design flood values estimated by the three methods including unlikely combinations of the controlling factors and attending uncertainties. Finally we discuss the impact on the downstream valley of floods exceeding the design values and of smaller floods and illustrate the basic concepts by examples from the recent flood in August 2002.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brandenberger, Jill M.; Kuo, Li-Jung; Suslick, Carolynn R.
Under the Project ENVVEST Final Project Agreement, the Puget Sound Naval Shipyard & Intermediate Maintenance Facility (PSNS&IMF), Environmental Protection Agency (EPA), Washington State Department of Ecology (Ecology), and local stakeholders have worked collaboratively to improve the environmental quality of Sinclair and Dyes Inlets. A regional mussel monitoring program began in 2010 to assess the status and trend of ecological resources, assess the effectiveness of cleanup and pollution control measures, and determine if discharges from all sources are protective of beneficial uses including aquatic life. The program collected indigenous mussels to represent a time-integrated measure of bioavailable metals and organic chemicalsmore » present in the water column. This document supplements the 2010 indigenous mussel data with 2012 data to provide two years of data on the chemical residue of mussels present in the inter-tidal regions of Sinclair Inlet, Dyes Inlet, Port Orchard Passage, Rich Passage, Agate Passage, Liberty Bay, and Keyport Lagoon. The 2012 data set added one station at PSNS&IMF and one market samples from Penn Cove. Indigenous mussels were collected from a small boat and/or from along the shoreline, measured, composited, and analyzed for percent lipids, percent moisture, stable isotopes of carbon and nitrogen, and a suite of trace metals and organic contaminants. The trace metals included silver (Ag), arsenic (As), cadmium (Cd), copper (Cu), mercury (Hg), lead (Pb), and zinc (Zn). The organic contaminants included the list of NOAA Status and Trends 20 polychlorinated biphenyls (PCB) congeners and suite of parent and methylated polycyclic aromatic hydrocarbons (PAHs). The average lengths between the 2010 and 2012 data were generally less than 30% relative percent difference (RPD). Generally, the metals concentrations were lower in 2012 than 2010 with some notable exceptions in Sinclair Inlet and Rich Passage where increases in Ag, Hg, Pb, Cu, and Zn exceeded an RPD of 50% between years. However, they did not exceed the bioaccumulation critical values or the critical body residues corresponding to the no observed effect dose (NOED) and the lowest observed effect dose (LOED) with one exception. The Cd concentrations exceeded the NOED and LOED for the Manchester Lab Pier and the Pike Place Market samples. For the PAHs and PCB, the 2012 data were generally lower than 2010 and some cases significantly lower for PAHs and none of the available invertebrate benchmarks were exceeded.« less
An audit of the current U.S. Department of Agriculture frame size scoring system.
Reinhardt, C D; Busby, W D
2014-06-01
Feedlot and carcass data from steers (n = 16,700) and heifers (n = 6,357) originating from 16 different states and fed in 17 feedlots located in southwest Iowa were used to evaluate the accuracy of the USDA frame score for predicting final BW of fed cattle. Frame score was recorded by USDA or state personnel for cattle either before leaving the state of origin or on arrival at the terminal feedlot. Mixed model procedures were used to investigate relationships between USDA frame score and measures of live performance and carcass traits. Other fixed effects included in the model included USDA muscle score, sex, age classification on feedlot entry (calf: ≤270 d of age, yearling: 271-365 d of age, and long yearling: >365 d of age), BCS on feedlot arrival, number of treatments for respiratory disease, hide color, and site of frame or muscle scoring; the interactions of sex × frame score and hide color × frame score were also included; fat thickness was included as a fixed effect (covariate) in the analysis of ADG, final BW, days on feed, LM area, marbling score, and quality grade. Random effects included in the model were year of feedlot arrival and feedlot in which cattle were fed. The system accurately projects the minimum target final BW for large frame steers and heifers; however, the final BW of the smallest medium frame steers and heifers exceeds the target minimum final BW by 35 and 40 kg, respectively. When frame score was assigned post facto based on actual final BW (adjusted to 1.27 cm fat thickness), it was determined that large frame was over-assigned by graders (62 vs. 35% for steers and 54 vs. 32% for heifers, actual score vs. postharvest score, respectively), medium frame was underassigned (37 vs. 51% and 46 vs. 58% for steers and heifers), and small frame was underassigned (0.7 vs. 15% and 0.6 vs. 10% for steers and heifers; K = 0.01, P < 0.01). Across sexes, of the cattle assigned to small, medium, or large frame score, 40, 59, and 43% actually had final BW (adjusted to 1.27 cm fat thickness) within the guidelines for the target final BW of each of the frame scores (P < 0.01). The present frame score system accurately reflects the modern feedlot cattle population; however, adjustments in the assignment of frame scores to reflect changes in technologies and final weights may be warranted.
Radiance limits of ceramic phosphors under high excitation fluxes
NASA Astrophysics Data System (ADS)
Lenef, Alan; Kelso, John; Zheng, Yi; Tchoul, Maxim
2013-09-01
Ceramic phosphors, excited by high radiance pump sources, offer considerable potential for high radiance conversion. Interestingly, thermodynamic arguments suggest that the radiance of the luminescent spot can even exceed that of the incoming light source. In practice, however, thermal quenching and (non-thermal) optical saturation limit the maximum attainable radiance of the luminescent source. We present experimental data for Ce:YAG and Ce:GdYAG ceramics in which these limits have been investigated. High excitation fluxes are achieved using laser pumping. Optical pumping intensities exceeding 100W/mm2 have been shown to produce only modest efficiency depreciation at low overall pump powers because of the short Ce3+ lifetime, although additional limitations exist. When pump powers are higher, heat-transfer bottlenecks within the ceramic and heat-sink interfaces limit maximum pump intensities. We find that surface temperatures of these laser-pumped ceramics can reach well over 150°C, causing thermal-quenching losses. We also find that in some cases, the loss of quantum efficiency with increasing temperature can cause a thermal run-away effect, resulting in a rapid loss in converted light, possibly over-heating the sample or surrounding structures. While one can still obtain radiances on the order of many W/mm2/sr, temperature quenching effects ultimately limit converted light radiance. Finally, we use the diffusion-approximation radiation transport models and rate equation models to simulate some of these nonlinear optical pumping and heating effects in high-scattering ceramics.
Science plus management equals successful remediation -- A case study
DOE Office of Scientific and Technical Information (OSTI.GOV)
Buehlman, M.D.; Rogers, D.T.; Payne, F.C.
In the past, owners of contaminated sites attempted to remediate as quickly as possible, usually by excavating contaminated soil or pumping and treating contaminated groundwater. Often, they started remediation before identifying all potential types and sources of contaminants, and before conducting a thorough hydrogeologic study. Such premature action usually resulted in the selected remedy not working, the contamination spreading, or unnecessary remedial activities. Today, successful site remediation is recognized as a complex and time-consuming undertaking--requiring a combination of careful scientific study, effective negotiation with the regulatory agencies and skillful management of multidisciplinary efforts. A case study involving a Brownfields sitemore » in southeastern Michigan clearly illustrates the elements of successful remediation. The site`s soil was contaminated with polychlorinated biphenyls (PCBs) and its groundwater with a variety of chlorinated solvents. The original estimate for remediation had exceeded $30 million. Several phases of investigation were conducted to evaluate the nature and sources of contaminants, the site`s hydrogeology, potential risks to human health and the environment, and feasible remedial technologies. Multiple cleanup criteria were established for different affected areas based on the results of the investigations, changes that were taking place with the state cleanup regulations and standards and subsequent negotiations with state and federal regulators. Innovative remedial technologies were selected. The result was a remediation that met or exceeded all soil and groundwater cleanup objectives, was performed on schedule, and was highly cost-effective. The final cost was limited to $3 million--one-tenth of the original estimate.« less
The nursing shortage: dynamics and solutions. Reflections on a recurring theme.
Abdellah, F G
1990-09-01
The passage of individual state nurse practice acts in the 1900s sharpened and focused attention on the practice and function of professional nurses. However, this had little effect on increasing the demand for nurses. In the 1930s student nurses were in ample supply. They staffed units in hospitals, and seniors served as charge or head nurses. It was World War II when one finally began to see the theme of nursing shortage emerge with a vengeance. The demand far exceeded the supply, creating a severe imbalance. The intervening next 4 decades brought forth many excellent models to minimize the shortage. Even the federal government contributed to the nursing shortage by offering opportunities for better-educated practitioners, teachers, and supervisors. Thus, as the nurse became better prepared, the demand for services increased. Several milestone studies are referenced during the 1970s and 1980s that attempted to balance the nursing shortage equation. The US objectives for the year 2000 provide specific guidelines as to what demands will be placed upon the nurse practitioner and educator. Can we meet those demands? Yes--with the full utilization of information technology to prepare the student and nurse practitioner to take advantage of this enormous information explosion. Will the nursing shortage continue to be a recurring theme? Yes! As nurses become better educated and ready for practice and patient-client problem solving, and as they provide strong voices in health policy formulation, the demands for their services will continue to far exceed the supply.
Lu, Hui; Liu, Xia; Chen, Hong; Long, Ruyin
2017-12-18
This study examines the relationship among the employees-organization pro-environmental values fit (E-O PEVs fit), supervisors' PEVs and employees' pro-environmental behaviors (PEB). Informed by the PEB, organizational values and employee-organization fit literature, we propose and test hypotheses that under egoistic, altruistic and biosphere-value orientations, E-O PEVs fit versus non-fit have significant effects on employees' private-sphere PEB and public-sphere PEB, identifying supervisors' PEVs as a moderator. An empirical investigation indicates that the effect of E-O PEVs fit on employees' private-sphere PEB and public-sphere PEB varies as the value orientation differs. More specifically, under the context of altruistic and biosphere-value orientations, if the organizational PEVs do not match the employees' PEVs, especially when the former exceeds the latter, employees' PEB will rise as the organizational PEVs increase. As for egoistic value orientation, when organizational PEVs exceed employees' PEVs, not only will public-sphere PEB stop decreasing and tend to stabilize, but also private-sphere PEB will rise to a slight degree. Furthermore, compared with altruistic and biospheric values dimensions, supervisors who promote egoistic PEVs will have a more significant effect on the relationship between global E-O PEVs fit and employees' PEB. Finally, we suggest that the goals of an organization and its supervisors need to be combined within the actual situation of Chinese corporations to truly implement corporate green practices by balancing the profit goal and the environmental goal.
NASA Astrophysics Data System (ADS)
Ouargui, Ahmed; Belouaggadia, Naoual; Elbouari, Abdeslam; Ezzine, Mohammed
2018-05-01
Buildings are responsible for 36% of the final energy consumption in Morocco [1-2], and a reduction of this energy consumption of buildings is a priority for the kingdom in order to reach its energy saving goals. One of the most effective actions to reduce energy consumption is the selection and development of innovative and efficient building materials [3]. In this work, we present an experimental study of the effect of adding treated organic waste (paper, cardboard, hash) on mechanical and thermal properties of cement and clay bricks. Thermal conductivity, specific heat and mechanical resistance were investigated in terms of content and size additives. Soaking time and drying temperature were also taken into account. The results reveal that thermal conductivity decreases as well in the case of the paper-cement mixture as that of the paper-clay and seems to stabilize around 40%. In the case of the composite paper-cement, it is found that, for an additives quantity exceeding 15%, the compressive strength exceeds the standard for the hollow non-load bearing masonry. However, the case of paper-clay mixture seems to give more interesting results, related to the compressive strength, for a mass composition of 15% in paper. Given the positive results achieved, it seems possible to use these composites for the construction of walls, ceilings and roofs of housing while minimizing the energy consumption of the building.
Battelle Energy Alliance, LLC (BEA) 2016 Self-Assessment Report for Idaho National Laboratory (INL)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Alvarez, Juan
This report provides Battelle Energy Alliance’s (BEA) self-assessment of performance for the period of October 1, 2015, through September 30, 2016, as evaluated against the goals, performance objectives, and notable outcomes defined in the Fiscal Year (FY) 2016 Performance Evaluation and Measurement Plan (PEMP). BEA took into consideration and consolidated all input provided from internal and external sources (e.g., Contractor Assurance System [CAS], program and customer feedback, external and independent reviews, and Department of Energy [DOE] Idaho Operations Office [ID] quarterly PEMP reports and Quarterly Evaluation Reports). The overall performance of BEA during this rating period was self-assessed as “Excellent,”more » exceeding expectations of performance in Goal 1.0, “Efficient and Effective Mission Accomplishment”; Goal 2.0, “Efficient and Effective Stewardship and Operation of Research Facilities”; and Goal 3.0, “Sound and Competent Leadership and Stewardship of the Laboratory.” BEA met or exceeded expectations for Mission Support Goals 4.0 through 7.0 assessing a final multiplier of 1.0. Table 1 documents BEA’s assessment of performance to the goals and individual performance objectives. Table 2 documents completion of the notable outcomes. A more-detailed assessment of performance for each individual performance objective is documented in the closeout reports (see the PEMP reporting system). Table 3 includes an update to “Performance Challenges” as reported in the FY 2015 Self-Assessment Report.« less
NASA Astrophysics Data System (ADS)
Lebed', A. A.; Padusenko, E. A.; Roshchupkin, S. P.; Dubov, V. V.
2018-04-01
Electron-nucleus bremsstrahlung in the field of two moderately strong pulsed laser waves in the case of incommensurate frequencies is theoretically studied under resonant conditions. The process is studied in detail in a special kinematic region, where stimulated processes with correlated emission and absorption of photons of the first and second waves become predominant (parametric interference effect). The availability of this region is caused by interference of the first and second laser waves. The correspondence between the emission angle and the final-electron energy is established in this interference kinematic. In this case, the cross-sectional properties are determined by the multiphoton quantum interference parameter, which is proportional to the product of intensities of the first and second waves. The resonant differential cross section of electron-nucleus spontaneous bremsstrahlung with simultaneous registration of both emission angles of the spontaneous photon and the scattered electron can exceed by four or five orders of magnitude the corresponding cross section in the absence of an external field. It was shown for nonrelativistic electrons that the resonant cross section of the studied process in the field of two pulsed laser waves within the interference region in two order of magnitude may exceed corresponding cross sections at other scattering kinematics. The obtained results may be experimentally verified, for example, by scientific facilities at sources of pulsed laser radiation (such as SLAC, FAIR, XFEL, ELI).
NASA Master Teacher Re-Certification Program
NASA Technical Reports Server (NTRS)
Okari-Brooks, Emma; Thompson, Paul
2000-01-01
Edward Waters College is submitting a final report covering the grant period from January 1999 - April 30, 2000. The Teacher re-certification program at Edward Waters College created a high quality professional development opportunity for middle and high school science teachers which will contribute to the improvement of science education and the use of innovation technologies in the classroom for years to come. The following goals and objectives were met and exceeded during the grant period. 1) A focused and relevant educational technology curriculum based on National Science Education Standard and state-of-the art educational resources that are accepted as one of the qualifications for re-certification in the scientific discipline in Duval County, Florida. 2) The program goal was to recertify 40 middle and high school science teachers over a two- year period. This goal was met and exceeded the projected number by recertifying over 80 middle and high school science and math teachers over a two-year period. 3) Teachers that were recertified were given an opportunity to public information that they developed on EWC's Web page or develop a web page of their own. Area schools were made aware of this information through various forms of communication with the teachers in Duval County School District, i.e., flyers sent from EWC to participants, school newspapers, word of mouth, etc. 4) A multimedia technology resource lab is available at EWC for use as a "Learning Lab" for class field trips by Duval County teachers.
The enigma of inhaled salbutamol and sport: unresolved after 45 years.
Fitch, Ken D
2017-07-01
During the past 45 years, there have been more changes on the World Anti-Doping Agency's (WADA) Prohibited List (the List) to the status of inhaled salbutamol than any other substance. With 658 athletes, 6.1% of all participating athletes approved to inhale salbutamol at the 2008 Beijing Games, it is one of the medications used most frequently by Olympic athletes. Nevertheless, since the 2008 Games, WADA has made numerous changes to inhaled salbutamol on the List including prohibiting its use, then a year later permitting it without prior notification and recommending a pharmacokinetic study if an athlete exceeds the urinary threshold of 1000 ng/mL. Recently, an elite athlete undertook two pharmacokinetic studies and the results have raised several questions. These include whether WADA should continue to permit nebulized salbutamol as an acceptable method of inhalation and there is some justification for nebulized salbutamol to be prohibited in sport. Another question is whether the modified advisory on salbutamol in the 2017 List appropriately informs athletes of the risks of exceeding the urinary threshold and the recent changes may not inform athletes optimally. Finally, concern is expressed at the persistent failure of WADA to apply a correction down to a specific gravity of 1.020 when an exogenous substance is identified in the urine of a dehydrated athlete. It is recommended that this should be implemented. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.
Ground-water quality in east-central New Jersey, and a plan for sampling networks
Harriman, D.A.; Sargent, B.P.
1985-01-01
Groundwater quality was evaluated in seven confined aquifers and the water table aquifer in east-central New Jersey based on 237 analyses of samples collected in 1981-82, and 225 older analyses. Investigation of the effect of land use on water quality and several sampling network proposals for the region are reported. Generally, water in the confined aquifers is of satisfactory quality for human consumption and most other uses. Iron (Fe) and manganese (Mn) concentrations exceed U.S. EPA drinking water standards in some wells screened in the Potomac-Raritan-Magothy aquifer system. Sodium (Na) concentrations in samples from three wells more than 800 ft deep in the Englishtown aquifer exceed the standard. Iron and Mn concentrations in this aquifer may also exceed the standards. Iron concentrations in the Wenonah-Mount Laurel aquifer exceed the standard. Based on 15 analyses of water from the Vincetown aquifer, Mn is the only constituent that exceeds the drinking water standard. In the Manasquan aquifer, 4 of the 16 Na determinations exceed the standard, and 8 of 16 Fe determinations exceed the standard. Water quality in the Atlantic City 800-ft sand is generally satisfactory. However, 12 Fe and 1 of 12 Mn determinations exceed the standards. For the Rio Grande water-bearing zone, 1 of 3 Fe determinations exceed the standard. The Kirkwood-Cohansey aquifer system (the water table aquifer) was the most thoroughly sampled (249 chemical analyses from 209 wells). Dissolved solids, chloride, Fe, nitrate, and Mn concentrations exceed drinking water standards in some areas. The results of chi-square tests of constituent distributions based on analyses from 158 wells in the water table aquifer indicate that calcium is higher in industrial and commercial areas; and Mg, chloride, and nitrate-plus-nitrite is higher in residential areas. (Author 's abstract)
Groundwater Quality in Central New York, 2007
Eckhardt, David A.V.; Reddy, J.E.; Shaw, Stephen B.
2009-01-01
Water samples were collected from 7 production wells and 28 private residential wells in central New York from August through December 2007 and analyzed to characterize the chemical quality of groundwater. Seventeen wells are screened in sand and gravel aquifers, and 18 are finished in bedrock aquifers. The wells were selected to represent areas of greatest groundwater use and to provide a geographical sampling from the 5,799-square-mile study area. Samples were analyzed for 6 physical properties and 216 constituents, including nutrients, major inorganic ions, trace elements, radionuclides, pesticides, volatile organic compounds, phenolic compounds, organic carbon, and 4 types of bacteria. Results indicate that groundwater used for drinking supply is generally of acceptable quality, although concentrations of some constituents or bacteria exceeded at least one drinking-water standard at several wells. The cations detected in the highest concentrations were calcium, magnesium, and sodium; anions detected in the highest concentrations were bicarbonate, chloride, and sulfate. The predominant nutrients were nitrate and ammonia, but no nutrients exceeded Maximum Contaminant Levels (MCLs). The trace elements barium, boron, lithium, and strontium were detected in every sample; the trace elements present in the highest concentrations were barium, boron, iron, lithium, manganese, and strontium. Fifteen pesticides, including seven pesticide degradates, were detected in water from 17 of the 35 wells, but none of the concentrations exceeded State or Federal MCLs. Sixteen volatile organic compounds were detected in water from 15 of the 35 wells. Nine analytes and three types of bacteria were detected in concentrations that exceeded Federal and State drinking-water standards, which typically are identical. One sample had a water color that exceeded the U.S. Environmental Protection Agency (USEPA) Secondary Maximum Contaminant Level (SMCL) and the New York State MCL of 10 color units. Sulfate concentrations exceeded the USEPA SMCL and the New York State MCL of 250 milligrams per liter (mg/L) in two samples, and chloride concentrations exceeded the USEPA SMCL and the New York State MCL of 250 mg/L in two samples. Sodium concentrations exceeded the USEPA Drinking Water Health Advisory of 60 mg/L in eight samples. Iron concentrations exceeded the USEPA SMCL and the New York State MCL of 300 micrograms per liter (ug/L) in 10 filtered samples. Manganese exceeded the USEPA SMCL of 50 ug/L in 10 filtered samples and the New York State MCL of 300 ug/L in 1 filtered sample. Barium exceeded the MCL of 2,000 ug/L in one sample, and aluminum exceeded the SMCL of 50 ug/L in three samples. Radon-222 exceeded the proposed USEPA MCL of 300 picocuries per liter in 12 samples. One sample from a private residential well had a trichloroethene concentration of 50.8 ug/L, which exceeded the MCL of 5 ug/L. Any detection of coliform bacteria indicates a potential violation of New York State health regulations; total coliform bacteria were detected in 19 samples, and fecal coliform bacteria were detected in one sample. The plate counts for heterotrophic bacteria exceeded the MCL (500 colony-forming units per milliliter) in three samples.
10 CFR 40.60 - Reporting requirements.
Code of Federal Regulations, 2014 CFR
2014-01-01
... to avoid exposures to radiation or radioactive materials that could exceed regulatory limits or... releases exceeding regulatory limits, to prevent exposures to radiation and radioactive materials exceeding regulatory limits, or to mitigate the consequences of an accident; (ii) The equipment is required to be...
10 CFR 40.60 - Reporting requirements.
Code of Federal Regulations, 2013 CFR
2013-01-01
... to avoid exposures to radiation or radioactive materials that could exceed regulatory limits or... releases exceeding regulatory limits, to prevent exposures to radiation and radioactive materials exceeding regulatory limits, or to mitigate the consequences of an accident; (ii) The equipment is required to be...
10 CFR 40.60 - Reporting requirements.
Code of Federal Regulations, 2012 CFR
2012-01-01
... to avoid exposures to radiation or radioactive materials that could exceed regulatory limits or... releases exceeding regulatory limits, to prevent exposures to radiation and radioactive materials exceeding regulatory limits, or to mitigate the consequences of an accident; (ii) The equipment is required to be...
Australia 31-GHz brightness temperature exceedance statistics
NASA Technical Reports Server (NTRS)
Gary, B. L.
1988-01-01
Water vapor radiometer measurements were made at DSS 43 during an 18 month period. Brightness temperatures at 31 GHz were subjected to a statistical analysis which included correction for the effects of occasional water on the radiometer radome. An exceedance plot was constructed, and the 1 percent exceedance statistics occurs at 120 K. The 5 percent exceedance statistics occurs at 70 K, compared with 75 K in Spain. These values are valid for all of the three month groupings that were studied.
Ground-Water Quality in Western New York, 2006
Eckhardt, David A.V.; Reddy, James E.; Tamulonis, Kathryn L.
2008-01-01
Water samples were collected from 7 production wells and 26 private residential wells in western New York from August through December 2006 and analyzed to characterize the chemical quality of ground water. Wells at 15 of the sites were screened in sand and gravel aquifers, and 18 were finished in bedrock aquifers. The wells were selected to represent areas of greatest ground-water use and to provide a geographical sampling from the 5,340-square-mile study area. Samples were analyzed for 5 physical properties and 219 constituents that included nutrients, major inorganic ions, trace elements, radionuclides, pesticides, volatile organic compounds (VOC), phenolic compounds, organic carbon, and bacteria. Results indicate that ground water used for drinking supply is generally of acceptable quality, although concentrations of some constituents or bacteria exceeded at least one drinking-water standard at 27 of the 33 wells. The cations that were detected in the highest concentrations were calcium, magnesium, and sodium; anions that were detected in the highest concentrations were bicarbonate, chloride, and sulfate. The predominant nutrients were nitrate and ammonia; nitrate concentrations were higher in samples from sand and gravel aquifers than in samples from bedrock. The trace elements barium, boron, copper, lithium, nickel, and strontium were detected in every sample; the trace elements with the highest concentrations were barium, boron, iron, lithium, manganese, and strontium. Eighteen pesticides, including 9 pesticide degradates, were detected in water from 14 of the 33 wells, but none of the concentrations exceeded State or Federal Maximum Contaminant Levels (MCLs). Fourteen volatile organic compounds were detected in water from 12 of the 33 wells, but none of the concentrations exceeded MCLs. Eight chemical analytes and three types of bacteria were detected in concentrations that exceeded Federal and State drinking-water standards, which are typically identical. Sulfate concentrations exceeded the U.S. Environmental Protection Agency (USEPA) Secondary Maximum Contaminant Level (SMCL) of 250 milligrams per liter (mg/L) in three samples, and chloride concentrations exceeded the SMCL of 250 mg/L in two samples. Sodium concentrations exceeded the USEPA Drinking Water Health Advisory of 60 mg/L in nine samples. Iron concentrations exceeded the SMCL of 300 ug/L (micrograms per liter) in 14 filtered samples, and manganese exceeded the USEPA SMCL of 50 ug/L in 15 filtered samples, as well as the New York State MCL of 300 ug/L in 1 filtered sample. Arsenic exceeded the USEPA MCL of 10 ug/L in two samples, aluminum exceeded the SMCL for aluminum of 50 ug/L in one sample, and lead exceeded the MCL of 15 ug/L in one sample. Radon-222 exceeded the proposed USEPA MCL of 300 picocuries per liter in 24 samples. Any detection of coliform bacteria indicates a violation of New York State health regulations; total coliform was detected in 12 samples, and Escherichia coli was detected in 2 samples. The plate counts for heterotrophic bacteria exceeded the MCL (500 colony-forming units per milliliter) in four samples.
Code of Federal Regulations, 2010 CFR
2010-10-01
... for contracts not to exceed the simplified acquisition threshold. 836.602-5 Section 836.602-5 Federal... contracts not to exceed the simplified acquisition threshold. Either of the procedures provided in FAR 36... simplified acquisition threshold. ...
NASA Astrophysics Data System (ADS)
Lanez, M.; Oudjit, M. N.; Zenati, A.; Arroudj, K.; Bali, A.
Reactive powder concretes (RPC) are characterized by a particle diameter not exceeding 600 μm and having very high compressive and tensile strengths. This paper describes a new generation of micro concrete, which has an initial as well as a final high physicomechanical performance. To achieve this, 15% by weight of the Portland cement have been substituted by materials rich in Silica (Slag and Dune Sand). The results obtained from the tests carried out on the RPC show that compressive and tensile strengths increase when incorporating the addition, thus improving the compactness of mixtures through filler and pozzolanic effects. With a reduction in the aggregate phase in the RPC and the abundance of the dune sand (southern of Algeria) and slag (industrial by-product of the blast furnace), the use of the RPC will allow Algeria to fulfil economical as well as ecological requirements.
ICESat-2 laser technology development
NASA Astrophysics Data System (ADS)
Edwards, Ryan; Sawruk, Nick W.; Hovis, Floyd E.; Burns, Patrick; Wysocki, Theodore; Rudd, Joe; Walters, Brooke; Fakhoury, Elias; Prisciandaro, Vincent
2013-09-01
A number of ICESat-2 system requirements drove the technology evolution and the system architecture for the laser transmitter Fibertek has developed for the mission.. These requirements include the laser wall plug efficiency, laser reliability, high PRF (10kHz), short-pulse (<1.5ns), relatively narrow spectral line-width, and wave length tunability. In response to these requirements Fibertek developed a frequency-doubled, master oscillator/power amplifier (MOPA) laser that incorporates direct pumped diode pumped Nd:YVO4 as the gain media, Another guiding force in the system design has been extensive hardware life testing that Fibertek has completed. This ongoing hardware testing and development evolved the system from the original baseline brass board design to the more robust flight laser system. The final design meets or exceeds all NASA requirements and is scalable to support future mission requirements.
Life Prediction of Spent Fuel Storage Canister Material
DOE Office of Scientific and Technical Information (OSTI.GOV)
Ballinger, Ronald
The original purpose of this project was to develop a probabilistic model for SCC-induced failure of spent fuel storage canisters, exposed to a salt-air environment in the temperature range 30-70°C for periods up to and exceeding 100 years. The nature of this degradation process, which involves multiple degradation mechanisms, combined with variable and uncertain environmental conditions dictates a probabilistic approach to life prediction. A final report for the original portion of the project was submitted earlier. However, residual stress measurements for as-welded and repair welds could not be performed within the original time of the project. As a result ofmore » this, a no-cost extension was granted in order to complete these tests. In this report, we report on the results of residual stress measurements.« less
Dust disks around Vega-type stars
NASA Astrophysics Data System (ADS)
Chini, R.; Kruegel, E.; Kreysa, E.; Shustov, B.; Tutukov, A.
1991-12-01
This study presents 1300-micron observations of the circumstellar dust around Vega-type stars. A comparison of the new data (24-arcsec HPBW) for Alpha PsA, Tau-1 Eri and Epsilon Eri with previous measurements made at an angular resolution of 11-arcsec shows that the dust emission is extended. From measurements at different positions it is concluded that the circumstellar dust around Beta Pic does not exceed the size of the optical disk of 500 AU. A model for Beta Pic that fits optical as well as IR data is discussed. Finally, a scenario for the evolution of circumstellar grains is suggested where, on one side, the Poynting-Robertson effect removes the small particles and, on the other side, collisions lead to the formation of larger bodies. Time-dependent IR spectra in reasonable agreement with observations are presented.
Woodroffe, Jesse Richard; Morley, S. K.; Jordanova, V. K.; ...
2016-09-20
Geoelectromagnetic disturbances (GMDs) are an important consequence of space weather that can directly impact many types of terrestrial infrastructure. In this paper, we analyze 30 years of SuperMAG magnetometer data from the range of magnetic latitudes 20°≤λ≤75° to derive characteristic latitudinal profiles for median GMD amplitudes. Based on this data, we obtain a parameterization of these latitudinal profiles of different types of GMDs, providing an analytical fit with Dst-dependent parameters. Finally, we also obtain probabilistic estimates for the magnitudes of “100 year” GMDs, finding thatmore » $$\\dot{_B}$$ = 6.9 (3.60–12.9) nT/s should be expected at 45°≤λ< 50°, exceeding the 5 nT/s threshold for dangerous inductive heating.« less
2014-12-05
From about three times the distance from Earth to the moon, NASA's Dawn spacecraft spies its final destination -- the dwarf planet Ceres. The resolution of this image does not yet exceed the best views of Ceres, which were obtained by the Hubble Space Telescope (see PIA10235). Nonetheless, Ceres' spherical shape is clearly revealed here. Sunlight illuminates the dwarf planet from the right, leaving a sliver of the surface in shadow at left. A zoomed-in view is provided in Figure 1, along with the original unmagnified, uncropped view. The image was taken on Dec. 1, 2014 with the Dawn spacecraft's framing camera, using a clear spectral filter. Dawn was about 740,000 miles (1.2 million kilometers) from Ceres at the time. Ceres is 590 miles (950 kilometers) across and was discovered in 1801. http://photojournal.jpl.nasa.gov/catalog/PIA19049
UNIFORMLY MOST POWERFUL BAYESIAN TESTS
Johnson, Valen E.
2014-01-01
Uniformly most powerful tests are statistical hypothesis tests that provide the greatest power against a fixed null hypothesis among all tests of a given size. In this article, the notion of uniformly most powerful tests is extended to the Bayesian setting by defining uniformly most powerful Bayesian tests to be tests that maximize the probability that the Bayes factor, in favor of the alternative hypothesis, exceeds a specified threshold. Like their classical counterpart, uniformly most powerful Bayesian tests are most easily defined in one-parameter exponential family models, although extensions outside of this class are possible. The connection between uniformly most powerful tests and uniformly most powerful Bayesian tests can be used to provide an approximate calibration between p-values and Bayes factors. Finally, issues regarding the strong dependence of resulting Bayes factors and p-values on sample size are discussed. PMID:24659829
Late Vendian postcollisional leucogranites of Yenisei Ridge
NASA Astrophysics Data System (ADS)
Nozhkin, A. D.; Likhanov, I. I.; Reverdatto, V. V.; Bayanova, T. B.; Zinoviev, S. V.; Kozlov, P. S.; Popov, N. V.; Dmitrieva, N. V.
2017-06-01
The Late Vendian (540-550 Ma) U-Pb zircon age of postcollisional granitoids in the Osinovka Massif was obtained for the first time. The Osinovka Massif is located in rocks of the island-arc complex of the Isakovka Terrane, in the northwestern part of the Sayany-Yenisei accretion belt. These events stand for the final stage of the Neoproterozoic history of the Yenisei Ridge, related to the completing accretion of the oceanic crust fragments and the beginning of the Caledonian orogenesis. The petrogeochemical composition and the Sm-Nd isotopic characteristics support the fact that the granitoid melt originated from a highly differentiated continental crust of the southwestern margin of the Siberian Craton. Hence, the granite-bearing Late Riphean island-arc complexes were thrust over the craton margin at a distance considerably exceeding the dimensions of the Osinovka Massif.
Solitary waves in a peridynamic elastic solid
Silling, Stewart A.
2016-06-23
The propagation of large amplitude nonlinear waves in a peridynamic solid is ana- lyzed. With an elastic material model that hardens in compression, sufficiently large wave pulses propagate as solitary waves whose velocity can far exceed the linear wave speed. In spite of their large velocity and amplitude, these waves leave the material they pass through with no net change in velocity and stress. They are nondissipative and nondispersive, and they travel unchanged over large distances. An approximate solution for solitary waves is derived that reproduces the main features of these waves observed in computational simulations. We demonstrate, by numericalmore » studies, that waves interact only weakly with each other when they collide. Finally, we found that wavetrains composed of many non-interacting solitary waves form and propagate under certain boundary and initial conditions.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1985-11-21
The 50-acre Lake Sandy Jo Landfill is located in the Black Oak community (predominantly residential) of southwestern Gary in Lake County, Indiana. From about 1971 until about 1980, the lake was filled in with construction and demolition debris, municipal garbage, industrial wastes, hazardous materials, and possibly drummed wastes. These wastes are partly to completely exposed on the landfill surface. Surface soil, subsurface soil, surface water, sediment, and ground water show a variety of metal and organic chemical carcinogens. Toxic noncarcinogen priority pollutants found were chloromethane, copper, cyanide, lead, mercury, and silver. Inorganic soil levels found on the site for leadmore » and cadmium exceed levels of concern that would permit unrestricted use of the site. Remedial measures would be necessary before the site could be granted unrestricted use.« less
Improved self-contained breathing apparatus concept. Final report Oct 80-Jun 82
DOE Office of Scientific and Technical Information (OSTI.GOV)
White, L.; Walker, J.
1982-08-01
Past operational experiences of USAF fire fighting and rescue teams have indicated the need for an improved self-contained breathing apparatus (SCBA). In October 1980, a contract was awarded to Electronic Data Systems, Panama City, Florida, to design and develop a prototype SCBA that would meet Air Force technical requirements. A prototype was designed, developed, and tested through a subcontract with Reimers Consultants, Falls Church, Virginia. This report describes the technical requirements, a detailed technical description of the unit, and the unmanned test procedures and results. The unmanned testing demonstrate that the prototype SCBA meets all performance requirements, except for weight.more » The fully charged prototype weights 34 pounds, the maximum acceptable weight is 30 pounds. With the other performance requirements either met or exceeded, manned testing of the SCBA can proceed.« less
Design and evaluation of an imaging spectrophotometer incorporating a uniform light source.
Noble, S D; Brown, R B; Crowe, T G
2012-03-01
Accounting for light that is diffusely scattered from a surface is one of the practical challenges in reflectance measurement. Integrating spheres are commonly used for this purpose in point measurements of reflectance and transmittance. This solution is not directly applicable to a spectral imaging application for which diffuse reflectance measurements are desired. In this paper, an imaging spectrophotometer design is presented that employs a uniform light source to provide diffuse illumination. This creates the inverse measurement geometry to the directional illumination/diffuse reflectance mode typically used for point measurements. The final system had a spectral range between 400 and 1000 nm with a 5.2 nm resolution, a field of view of approximately 0.5 m by 0.5 m, and millimeter spatial resolution. Testing results indicate illumination uniformity typically exceeding 95% and reflectance precision better than 1.7%.
Harsh-Environment Solid-State Gamma Detector for Down-hole Gas and Oil Exploration
DOE Office of Scientific and Technical Information (OSTI.GOV)
Peter Sandvik; Stanislav Soloviev; Emad Andarawis
2007-08-10
The goal of this program was to develop a revolutionary solid-state gamma-ray detector suitable for use in down-hole gas and oil exploration. This advanced detector would employ wide-bandgap semiconductor technology to extend the gamma sensor's temperature capability up to 200 C as well as extended reliability, which significantly exceeds current designs based on photomultiplier tubes. In Phase II, project tasks were focused on optimization of the final APD design, growing and characterizing the full scintillator crystals of the selected composition, arranging the APD device packaging, developing the needed optical coupling between scintillator and APD, and characterizing the combined elements asmore » a full detector system preparing for commercialization. What follows is a summary report from the second 18-month phase of this program.« less
Weaver, James; Lehmberg, Robert; Obenschain, Stephen; Kehne, David; Wolford, Matthew
2017-11-01
Stimulated rotational Raman scattering (SRRS) in the ultraviolet region (λ=248 nm) has been observed at the Nike laser over extended propagation paths in air during high power operation. Although this phenomenon is not significant for standard operating configurations at Nike, broadening of the laser spectrum and far-field focal profiles has been observed once the intensity-path length product exceeds a threshold of approximately 1 TW/cm. This paper presents experimental results and a new theoretical evaluation of these effects. The observations suggest that significantly broader spectra can be achieved with modest degradation of the final focal distribution. These results point to a possible path for enhanced laser-target coupling with the reduction of laser-plasma instabilities due to broad laser bandwidth produced by the SRRS.
Ruban, V; Larrarte, F; Berthier, M; Favreau, L; Sauvourel, Y; Letellier, L; Mosisni, M L; Raimbault, G
2005-01-01
A qualitative and quantitative budget at the outlet of the storm-water runoff system of a small suburban watershed is presented together with some data regarding waste-water. 445,000 m3 (34% of the rain-water volume) were drained by the storm-water runoff system and 40,879 m3 by the waste-water system from September 2002 to March 2004. Storm-water runoff is generally not heavily polluted with regard to trace metals but concentrations occasionally exceed the standards for surface water of good quality. On the contrary, pesticides (diuron and glyphosate) have very high concentrations especially in spring and autumn when their use is maximum. As the St Joseph storm-water runoff is finally discharged into the Erdre River, measures to reduce the use of these pollutants should be considered.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kukushkin, V. A., E-mail: vakuk@appl.sci-nnov.ru
2013-11-15
Using numerical simulation, it is shown that the recombination of free excitons photoexcited in diamond nanocrystals embedded in a polymer film can occur in the cooperative mode. It is found that this mode can be implemented despite the fact that diamond is an 'indirect' semiconductor. It is shown that the power of the generated radiation at the pulse peak during the cooperative recombination of free excitons can exceed that of the incoherent spontaneous emission of the same initial number of free excitons by more than an order of magnitude. Finally, it is shown that the process under consideration can bemore » used to generate picosecond pulses of ultraviolet and soft X-ray electromagnetic field at a wavelength of 235 nm.« less
Ground-Water Quality in the Genesee River Basin, New York, 2005-2006
Eckhardt, David A.V.; Reddy, J.E.; Tamulonis, Kathryn L.
2007-01-01
Water samples were collected from 7 community water system wells and 15 private domestic wells throughout the Genesee River Basin in New York State (downstream from the Pennsylvania border) from October 2005 through March 2006 and analyzed to characterize the chemical quality of ground water in the basin. The wells were selected to represent areas of greatest ground-water use and to provide a representative sampling from the 2,439 square-mile basin area in New York. Samples were analyzed for five physical properties and 226 constituents that included nutrients, major inorganic ions, trace elements, radionuclides, pesticides, volatile organic compounds, and bacteria. The results show that ground water used for drinking water is generally of good quality in the Genesee River Basin, although concentrations of seven constituents exceeded drinking water standards. The cations that were detected in the highest concentrations were calcium, magnesium, and sodium; the anions that were detected in the greatest concentrations were bicarbonate, chloride, and sulfate. The predominant nutrient was nitrate, and nitrate concentrations were greater in samples from sand and gravel aquifers than in samples from bedrock aquifers. The trace elements barium, boron, cobalt, copper, and nickel were detected in every sample; the highest concentrations were barium, boron, chromium, iron, manganese, strontium, and lithium. Fourteen pesticides including seven pesticide degradates were detected in water from 12 of the 22 wells, but none of the concentrations exceeded Maximum Contaminant Levels (MCLs). Eight volatile organic compounds (VOCs) were detected in six samples, but none of the concentrations exceeded MCLs. Seven chemical analytes and three types of bacteria were present in concentrations that exceeded Federal and New York State water-quality standards, which are typically identical. Sulfate concentrations exceeded the U.S. Environmental Protection Agency (USEPA) Secondary Maximum Contaminant Level (SMCL) of 250 milligrams per liter (mg/L) in three samples; the chloride SMCL (250 mg/L) was exceeded in one sample. Sodium concentrations exceeded the USEPA Drinking Water Health Advisory of 60 mg/L in five samples. The SMCL for iron (300 ug/L) was exceeded in 11 filtered samples; the USEPA SMCL for manganese (50 ug/L) was exceeded in 10 filtered samples, and the New York State MCL (300 ug/L) was exceeded in 1 filtered sample. The MCL for aluminum (200 ug/L) was exceeded in 1 sample, and the MCL for arsenic (10 ug/L) was exceeded in 1 sample. Radon-222 exceeded the proposed USEPA MCL of 300 picocuries per liter in 16 samples. Any detection of total coliform or fecal coliform bacteria is considered a violation of New York State health regulations; in this study, total coliform was detected in eight samples; fecal coliform was detected in two samples, and Escherichia coli was detected in one sample.
Broda, Anja; LaPlante, Debi A; Nelson, Sarah E; LaBrie, Richard A; Bosworth, Leslie B; Shaffer, Howard J
2008-01-01
Background In an attempt to reduce harm related to gambling problems, an Internet sports betting service provider, bwin Interactive Entertainment, AG (bwin), imposes limits on the amount of money that users can deposit into their online gambling accounts. We examined the effects of these limits on gambling behavior. Methods We compared (1) gambling behavior of those who exceeded deposit limits with those who did not, and (2) gambling behavior before and after exceeding deposit limits. We analyzed 2 years of the actual sports gambling behavior records of 47000 subscribers to bwin. Results Only 160 (0.3%) exceeded deposit limits at least once. Gamblers who exceeded deposit limits evidenced higher average number of bets per active betting day and higher average size of bets than gamblers who did not exceed deposit limits. Comparing the gambling behavior before and after exceeding deposit limits revealed slightly more unfavorable gambling behavior after exceeding deposit limits. Conclusion Our findings indicate that Internet gamblers who exceed deposit limits constitute a group of bettors willing to take high risks; yet, surprisingly, they appear to do this rather successfully because their percentage of losses is lower than others in the sample. However, some of these gamblers exhibit some poor outcomes. Deposit limits might be necessary harm reduction measures to prevent the loss of extremely large amounts of money and cases of bankruptcy. We discuss how these limits might be modified based on our findings. PMID:18684323
Broda, Anja; LaPlante, Debi A; Nelson, Sarah E; LaBrie, Richard A; Bosworth, Leslie B; Shaffer, Howard J
2008-08-06
In an attempt to reduce harm related to gambling problems, an Internet sports betting service provider, bwin Interactive Entertainment, AG (bwin), imposes limits on the amount of money that users can deposit into their online gambling accounts. We examined the effects of these limits on gambling behavior. We compared (1) gambling behavior of those who exceeded deposit limits with those who did not, and (2) gambling behavior before and after exceeding deposit limits. We analyzed 2 years of the actual sports gambling behavior records of 47000 subscribers to bwin. Only 160 (0.3%) exceeded deposit limits at least once. Gamblers who exceeded deposit limits evidenced higher average number of bets per active betting day and higher average size of bets than gamblers who did not exceed deposit limits. Comparing the gambling behavior before and after exceeding deposit limits revealed slightly more unfavorable gambling behavior after exceeding deposit limits. Our findings indicate that Internet gamblers who exceed deposit limits constitute a group of bettors willing to take high risks; yet, surprisingly, they appear to do this rather successfully because their percentage of losses is lower than others in the sample. However, some of these gamblers exhibit some poor outcomes. Deposit limits might be necessary harm reduction measures to prevent the loss of extremely large amounts of money and cases of bankruptcy. We discuss how these limits might be modified based on our findings.
Parkhurst, Renee S.
1994-01-01
A study of coal ponds formed by strip mining in eastern Oklahoma included 25 ponds formed by strip mining from the Croweburg, McAlester, and Iron Post coal seams and 6 noncoal-mine ponds in the coal-mining area. Water-quality samples were collected in the spring and summer of 1985 to determine the suitability of the ponds for public water supply, aquatic life, waterfowl habitat, livestock watering, irrigation, and recreation. The rationale for water-quality criteria and the criteria used for each proposed use are discussed. The ponds were grouped by the coal seam mined or as noncoal-mine ponds, and the number of ponds from each group containing water that exceeded a given criterion is noted. Water in many of the ponds can be used for public water supplies if other sources are not available. Water in most of these ponds exceeds one or more secondary standards, but meets all primary standards. Water samples from the epilimnion (shallow strata as determined by temperature) of six ponds exceeded one or more primary standards, which are criteria protective of human health. Water samples from five of eight Iron Post ponds exceeded the selenium criterion. Water samples from all 31 ponds exceeded one or more secondary standards, which are for the protection of human welfare. The criteria most often exceeded were iron, manganese, dissolved solids, and sulfate, which are secondary standards. The criteria for iron and manganese were exceeded more frequently in the noncoal-mine ponds, whereas ponds formed by strip mining were more likely to exceed the criteria for dissolved solids and sulfate. The ponds are marginally suited for aquatic life. Water samples from the epilimnion of 18 ponds exceeded criteria protective of aquatic life. The criteria for mercury and iron were exceeded most often. Little difference was detected between mine ponds and noncoal-mine ponds. Dissolved oxygen concentrations in the hypolimnion (deepest strata) of all the ponds were less than the minimum criterion during the summer. This decreases available fish habitat and affects the type and number of benthic invertebrates. The ponds are generally well suited for use by wintering and migrating waterfowl. Thirteen of the ponds contained water that exceeded the pH, alkalinity, and selenium criteria. The noncoal-mine ponds had the largest percentage of ponds exceeding pH and alkalinity criteria. Water samples from five of eight Iron Post ponds exceeded the selenium criterion. All ponds are generally unsuitable as waterfowl habitat during the summer because of high temperatures and low dissolved oxygen. Most of the ponds are well suited for livestock watering. Water samples from the epilimnion of 29 ponds met all chemical and physical criteria. Water samples from five ponds exceeded the criteria in the hypolimnion. Mine ponds exceeded chemical and physical criteria more often than noncoal-mine ponds. All the ponds contained phytoplankton species potentially toxic to livestock. Water from most of the ponds is marginally suitable for irrigation of sensitive crops, but is more suitable for irrigation of semitolerant and tolerant crops. Most major cash crops grown in eastern Oklahoma are semitolerant and tolerant crops. Water from the epilimnion of 14 ponds was suitable for irrigation under almost all conditions. Water from the epilimnion of 20 ponds was suitable for irrigation of semitolerant crops, and water from the epilimnion of 25 ponds is suitable for irrigation of tolerant crops. The dissolved solids criterion was exceeded the most often. Most of the ponds would not be suitable for swimming. The pH criterion was exceeded in 17 ponds and turbidity restricts visibility needed for diving in 23 ponds. Little difference was detected between mine ponds and noncoal-mine ponds. Many of the ponds formed by strip mining have steep banks that may be dangerous to swimmers.
Code of Federal Regulations, 2014 CFR
2014-04-01
... exceed 20 pages in length, double-spaced and, if appropriate, may include additional documentary material... decision. Such statement may not exceed 20 pages in length, double-spaced and, if appropriate, may include... mitigation of the proposed sanction, or statement in response thereto, may not exceed 25 pages in length...
14 CFR 23.841 - Pressurized cabins.
Code of Federal Regulations, 2013 CFR
2013-01-01
... emergency procedure. A 17-second flight crew recognition and reaction time must be applied between cabin... pressurization system must prevent the cabin altitude from exceeding the cabin altitude-time history shown in... exceeds 25,000 feet, the maximum time the cabin altitude may exceed 25,000 feet is 2 minutes; time...
14 CFR 23.841 - Pressurized cabins.
Code of Federal Regulations, 2014 CFR
2014-01-01
... emergency procedure. A 17-second flight crew recognition and reaction time must be applied between cabin... pressurization system must prevent the cabin altitude from exceeding the cabin altitude-time history shown in... exceeds 25,000 feet, the maximum time the cabin altitude may exceed 25,000 feet is 2 minutes; time...
40 CFR 265.259 - Response actions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... response action plan must set forth the actions to be taken if the action leakage rate has been exceeded... section. (b) If the flow rate into the leak determination system exceeds the action leakage rate for any... notification that the action leakage rate has been exceeded, submit to the Regional Administrator the results...
77 FR 2659 - Airworthiness Directives; Cessna Aircraft Company Airplanes
Federal Register 2010, 2011, 2012, 2013, 2014
2012-01-19
...), and of the bearing cup for corrosion, turned cup, or clearance that exceeds limits, and repair as... cup for corrosion, turned cup, or clearance that exceeds limits, and repair if necessary; measuring... on the metal), and of the bearing cup for corrosion, turned cup, or clearance that exceeds limits...
Code of Federal Regulations, 2010 CFR
2010-04-01
... bakery products; as release agent and lubricant With white mineral oil, not to exceed 0.15 percent of bakery product. In confectionery; as release agent and as sealing and polishing agent Not to exceed 0.2 percent of confectionery. In dehydrated fruits and vegetables; as release agent Not to exceed 0.02 percent...
47 CFR 27.50 - Power limits and duty cycle.
Code of Federal Regulations, 2011 CFR
2011-10-01
... supporting frequency division duplex (FDD) mobile and portable operations are restricted to transmitting in... duty cycle must not exceed 38 percent; for WCS CPE using FDD technology, the duty cycle must not exceed... stations using frequency division duplex (FDD) technology, the duty cycle must not exceed 12.5 percent in...
47 CFR 27.50 - Power limits and duty cycle.
Code of Federal Regulations, 2012 CFR
2012-10-01
... supporting frequency division duplex (FDD) mobile and portable operations are restricted to transmitting in... duty cycle must not exceed 38 percent; for WCS CPE using FDD technology, the duty cycle must not exceed... stations using frequency division duplex (FDD) technology, the duty cycle must not exceed 12.5 percent in...
50 CFR 648.24 - Fishery closures and accountability measures.
Code of Federal Regulations, 2013 CFR
2013-10-01
...) Mackerel commercial landings overage repayment. If the mackerel ACL is exceeded, and commercial fishery... repayment. If the mackerel ACL is exceeded, and the recreational fishery landings are responsible for the... single-year adjustment. (5) Non-landing AMs, by sector. In the event that the ACL is exceeded, and that...
50 CFR 648.24 - Framework adjustments to management measures.
Code of Federal Regulations, 2011 CFR
2011-10-01
... the mackerel ACL is exceeded, and commercial fishery landings are responsible for the overage, then... data. (4) Mackerel recreational landings overage repayment. If the mackerel ACL is exceeded, and the.... In the event that the ACL is exceeded, and that the overage has not been accommodated through other...
50 CFR 648.24 - Fishery closures and accountability measures.
Code of Federal Regulations, 2014 CFR
2014-10-01
... in § 648.26. (2) Mackerel commercial landings overage repayment. If the mackerel ACL is exceeded and... the event that the ACL is exceeded, and that the overage has not been accommodated through the landing... ACL is exceeded and the recreational fishery landings are responsible for the overage, then the...
40 CFR 423.15 - New source performance standards (NSPS).
Code of Federal Regulations, 2010 CFR
2010-07-01
... sources shall not exceed the quantity determined by multiplying the flow of low volume waste sources times... metal cleaning wastes shall not exceed the quantity determined by multiplying the flow of chemical metal... transport water shall not exceed the quantity determined by multiplying the flow of the bottom ash transport...
49 CFR 236.503 - Automatic brake application; initiation when predetermined rate of speed exceeded.
Code of Federal Regulations, 2011 CFR
2011-10-01
... predetermined rate of speed exceeded. 236.503 Section 236.503 Transportation Other Regulations Relating to... § 236.503 Automatic brake application; initiation when predetermined rate of speed exceeded. An automatic train control system shall operate to initiate an automatic brake application when the speed of...
49 CFR 236.503 - Automatic brake application; initiation when predetermined rate of speed exceeded.
Code of Federal Regulations, 2010 CFR
2010-10-01
... predetermined rate of speed exceeded. 236.503 Section 236.503 Transportation Other Regulations Relating to... § 236.503 Automatic brake application; initiation when predetermined rate of speed exceeded. An automatic train control system shall operate to initiate an automatic brake application when the speed of...
30 CFR 57.5060 - Limit on exposure to diesel particulate matter.
Code of Federal Regulations, 2012 CFR
2012-07-01
... diesel particulate matter (DPM) in an underground mine must not exceed an average eight-hour equivalent... particulate matter (DPM) in an underground mine must not exceed an average eight-hour equivalent full shift... mine must not exceed an average eight-hour equivalent full shift airborne concentration of 350...
30 CFR 57.5060 - Limit on exposure to diesel particulate matter.
Code of Federal Regulations, 2011 CFR
2011-07-01
... diesel particulate matter (DPM) in an underground mine must not exceed an average eight-hour equivalent... particulate matter (DPM) in an underground mine must not exceed an average eight-hour equivalent full shift... mine must not exceed an average eight-hour equivalent full shift airborne concentration of 350...
30 CFR 57.5060 - Limit on exposure to diesel particulate matter.
Code of Federal Regulations, 2013 CFR
2013-07-01
... diesel particulate matter (DPM) in an underground mine must not exceed an average eight-hour equivalent... particulate matter (DPM) in an underground mine must not exceed an average eight-hour equivalent full shift... mine must not exceed an average eight-hour equivalent full shift airborne concentration of 350...
30 CFR 57.5060 - Limit on exposure to diesel particulate matter.
Code of Federal Regulations, 2010 CFR
2010-07-01
... diesel particulate matter (DPM) in an underground mine must not exceed an average eight-hour equivalent... particulate matter (DPM) in an underground mine must not exceed an average eight-hour equivalent full shift... mine must not exceed an average eight-hour equivalent full shift airborne concentration of 350...
16 CFR 801.20 - Acquisitions subsequent to exceeding threshold.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 16 Commercial Practices 1 2014-01-01 2014-01-01 false Acquisitions subsequent to exceeding threshold. 801.20 Section 801.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 COVERAGE RULES § 801.20 Acquisitions subsequent to exceeding...
16 CFR 801.20 - Acquisitions subsequent to exceeding threshold.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 16 Commercial Practices 1 2013-01-01 2013-01-01 false Acquisitions subsequent to exceeding threshold. 801.20 Section 801.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS, STATEMENTS AND INTERPRETATIONS UNDER THE HART-SCOTT-RODINO ANTITRUST IMPROVEMENTS ACT OF 1976 COVERAGE RULES § 801.20 Acquisitions subsequent to exceeding...
16 CFR 801.20 - Acquisitions subsequent to exceeding threshold.
Code of Federal Regulations, 2010 CFR
2010-01-01
... threshold. 801.20 Section 801.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS... § 801.20 Acquisitions subsequent to exceeding threshold. Acquisitions meeting the criteria of section 7A... may have met or exceeded a notification threshold before the effective date of these rules; or (c) The...
16 CFR 801.20 - Acquisitions subsequent to exceeding threshold.
Code of Federal Regulations, 2011 CFR
2011-01-01
... threshold. 801.20 Section 801.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS... § 801.20 Acquisitions subsequent to exceeding threshold. Acquisitions meeting the criteria of section 7A... may have met or exceeded a notification threshold before the effective date of these rules; or (c) The...
16 CFR 801.20 - Acquisitions subsequent to exceeding threshold.
Code of Federal Regulations, 2012 CFR
2012-01-01
... threshold. 801.20 Section 801.20 Commercial Practices FEDERAL TRADE COMMISSION RULES, REGULATIONS... § 801.20 Acquisitions subsequent to exceeding threshold. Acquisitions meeting the criteria of section 7A... may have met or exceeded a notification threshold before the effective date of these rules; or (c) The...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Patrick Matthews
2011-09-01
Corrective Action Unit 365 comprises one corrective action site (CAS), CAS 08-23-02, U-8d Contamination Area. The purpose of this CADD/CR is to provide justification and documentation supporting the recommendation that no further corrective action is needed for CAU 365 based on the implementation of the corrective action of closure in place with a use restriction (UR). Corrective action investigation (CAI) activities were performed from January 18, 2011, through August 2, 2011, as set forth in the Corrective Action Investigation Plan for Corrective Action Unit 365: Baneberry Contamination Area. The purpose of the CAI was to fulfill data needs as definedmore » during the data quality objective (DQO) process. The CAU 365 dataset of investigation results was evaluated based on a data quality assessment. This assessment demonstrated the dataset is complete and acceptable for use in supporting the DQO decisions. Investigation results were evaluated against final action levels (FALs) established in this document. A radiological dose FAL of 25 millirem per year was established based on the Remote Work Area exposure scenario (336 hours of annual exposure). Radiological doses exceeding the FAL were found to be present to the southwest of the Baneberry crater. It was also assumed that radionuclide levels present within the crater and fissure exceed the FAL. Corrective actions were undertaken that consisted of establishing a UR and posting warning signs for the crater, fissure, and the area located to the southwest of the crater where soil concentrations exceeded the FAL. These URs were recorded in the FFACO database; the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) Facility Information Management System; and the NNSA/NSO CAU/CAS files. Therefore, NNSA/NSO provides the following recommendations: (1) No further corrective actions beyond what are described in this document are necessary for CAU 365. (2) A Notice of Completion to NNSA/NSO is requested from the Nevada Division of Environmental Protection for closure of CAU 365. (3) Corrective Action Unit 365 should be moved from Appendix III to Appendix IV of the FFACO.« less
Neale, Chris; Madill, Chris; Rauscher, Sarah; Pomès, Régis
2013-08-13
All molecular dynamics simulations are susceptible to sampling errors, which degrade the accuracy and precision of observed values. The statistical convergence of simulations containing atomistic lipid bilayers is limited by the slow relaxation of the lipid phase, which can exceed hundreds of nanoseconds. These long conformational autocorrelation times are exacerbated in the presence of charged solutes, which can induce significant distortions of the bilayer structure. Such long relaxation times represent hidden barriers that induce systematic sampling errors in simulations of solute insertion. To identify optimal methods for enhancing sampling efficiency, we quantitatively evaluate convergence rates using generalized ensemble sampling algorithms in calculations of the potential of mean force for the insertion of the ionic side chain analog of arginine in a lipid bilayer. Umbrella sampling (US) is used to restrain solute insertion depth along the bilayer normal, the order parameter commonly used in simulations of molecular solutes in lipid bilayers. When US simulations are modified to conduct random walks along the bilayer normal using a Hamiltonian exchange algorithm, systematic sampling errors are eliminated more rapidly and the rate of statistical convergence of the standard free energy of binding of the solute to the lipid bilayer is increased 3-fold. We compute the ratio of the replica flux transmitted across a defined region of the order parameter to the replica flux that entered that region in Hamiltonian exchange simulations. We show that this quantity, the transmission factor, identifies sampling barriers in degrees of freedom orthogonal to the order parameter. The transmission factor is used to estimate the depth-dependent conformational autocorrelation times of the simulation system, some of which exceed the simulation time, and thereby identify solute insertion depths that are prone to systematic sampling errors and estimate the lower bound of the amount of sampling that is required to resolve these sampling errors. Finally, we extend our simulations and verify that the conformational autocorrelation times estimated by the transmission factor accurately predict correlation times that exceed the simulation time scale-something that, to our knowledge, has never before been achieved.
NASA Astrophysics Data System (ADS)
Ayarza, P.; Carbonell, R.; Palomeras, I.; Levander, A.; Teixell, A.; Zelt, C. A.; Kchikach, A.
2013-12-01
The Atlas Mountains are an intra-continental Cenozoic orogenic belt located at the southern edge of the diffuse plate boundary zone separating Africa and Europe. Its western part, the Moroccan Atlas, has long been under the scope of geoscientists investigating the origin of its high topography, locally exceeding 4000 m. Geological studies indicate that this mountain belt has experienced low to moderate shortening (<24% from balanced sections) and that topography and shortening do not keep a direct relationship. Forward modelling of the SIMA (Seismic Imaging of the Moroccan Atlas) refraction/wide angle reflection seismic data suggests that the total orogenic shortening, is resolved at depth with a Moho offset and a limited lower crust duplication that defines a 40 km-deep root in the northern part of the central High Atlas. However, the shortening accomodated by this feature (50 km) exceeds that estimated with surface data, and the position of the root appears to the north of the highest topography. In order to achieve a better definition of the crust/mantle boundary and to outline a tectonic model more coherent with surface data, we have used the RAYINVR code to carry out travel-time inversion of the SIMA data set. Inversion results depict a small shift to the south of the crustal root, formerly positioned in the northern part of the High Atlas, and define a thrusted mantle wedge. A limited crustal imbrication also appears in the Middle Atlas. The new velocity model implies complex ray trajectories but provides a better travel-time fit between the observed and the calculated data. Also, the amount of shortening implied by the this model is in agreement with that estimated from geological cross-sections. The final crustal thickness, as yet not exceeding 40 km in the root zone and less than 35 km elsewhere, still implies the need of a significant contribution from the mantle to support the topography of the Atlas mountains
Forecasting impact injuries of unrestrained occupants in railway vehicle passenger compartments.
Xie, Suchao; Zhou, Hui
2014-01-01
In order to predict the injury parameters of the occupants corresponding to different experimental parameters and to determine impact injury indices conveniently and efficiently, a model forecasting occupant impact injury was established in this work. The work was based on finite experimental observation values obtained by numerical simulation. First, the various factors influencing the impact injuries caused by the interaction between unrestrained occupants and the compartment's internal structures were collated and the most vulnerable regions of the occupant's body were analyzed. Then, the forecast model was set up based on a genetic algorithm-back propagation (GA-BP) hybrid algorithm, which unified the individual characteristics of the back propagation-artificial neural network (BP-ANN) model and the genetic algorithm (GA). The model was well suited to studies of occupant impact injuries and allowed multiple-parameter forecasts of the occupant impact injuries to be realized assuming values for various influencing factors. Finally, the forecast results for three types of secondary collision were analyzed using forecasting accuracy evaluation methods. All of the results showed the ideal accuracy of the forecast model. When an occupant faced a table, the relative errors between the predicted and experimental values of the respective injury parameters were kept within ± 6.0 percent and the average relative error (ARE) values did not exceed 3.0 percent. When an occupant faced a seat, the relative errors between the predicted and experimental values of the respective injury parameters were kept within ± 5.2 percent and the ARE values did not exceed 3.1 percent. When the occupant faced another occupant, the relative errors between the predicted and experimental values of the respective injury parameters were kept within ± 6.3 percent and the ARE values did not exceed 3.8 percent. The injury forecast model established in this article reduced repeat experiment times and improved the design efficiency of the internal compartment's structure parameters, and it provided a new way for assessing the safety performance of the interior structural parameters in existing, and newly designed, railway vehicle compartments.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gunning, BP; Fabien, CAM; Merola, JJ
2015-01-28
The bulk and 2-dimensional (2D) electrical transport properties of heavily Mg-doped p-type GaN films grown on AlN buffer layers by Metal Modulated Epitaxy are explored. Distinctions are made between three primary p-type conduction mechanisms: traditional valence band conduction, impurity band conduction, and 2D conduction within a 2D hole gas at a hetero-interface. The bulk and 2D contributions to the overall carrier transport are identified and the relative contributions are found to vary strongly with growth conditions. Films grown with III/V ratio less than 1.5 exhibit high hole concentrations exceeding 2 x 10(19) cm(-3) with effective acceptor activation energies of 51more » meV. Films with III/V ratios greater than 1.5 exhibit lower overall hole concentrations and significant contributions from 2D transport at the hetero-interface. Films grown with III/V ratio of 1.2 and Mg concentrations exceeding 2 x 10(20) cm(-3) show no detectable inversion domains or Mg precipitation. Highly Mg-doped p-GaN and p-AlGaN with Al fractions up to 27% similarly exhibit hole concentrations exceeding 2 x 10(19) cm(-3). The p-GaN and p-Al0.11Ga0.89N films show broad ultraviolet (UV) photoluminescence peaks, which intercept the valence band, supporting the presence of a Mg acceptor band. Finally, a multi-quantum-well light-emitting diode (LED) and p-i-n diode are grown, both of which demonstrate rectifying behavior with turn-on voltages of 3-3.5V and series resistances of 6-10 Omega without the need for any post-metallization annealing. The LED exhibits violet-blue luminescence at 425 nm, while the p-i-n diode shows UV luminescence at 381 nm, and both devices still show substantial light emission even when submerged in liquid nitrogen at 77 K. (C) 2015 AIP Publishing LLC.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gunning, Brendan P.; Fabien, Chloe A. M.; Merola, Joseph J.
2015-01-28
The bulk and 2-dimensional (2D) electrical transport properties of heavily Mg-doped p-type GaN films grown on AlN buffer layers by Metal Modulated Epitaxy are explored. Distinctions are made between three primary p-type conduction mechanisms: traditional valence band conduction, impurity band conduction, and 2D conduction within a 2D hole gas at a hetero-interface. The bulk and 2D contributions to the overall carrier transport are identified and the relative contributions are found to vary strongly with growth conditions. Films grown with III/V ratio less than 1.5 exhibit high hole concentrations exceeding 2 × 10{sup 19} cm{sup −3} with effective acceptor activation energies of 51 meV.more » Films with III/V ratios greater than 1.5 exhibit lower overall hole concentrations and significant contributions from 2D transport at the hetero-interface. Films grown with III/V ratio of 1.2 and Mg concentrations exceeding 2 × 10{sup 20} cm{sup −3} show no detectable inversion domains or Mg precipitation. Highly Mg-doped p-GaN and p-AlGaN with Al fractions up to 27% similarly exhibit hole concentrations exceeding 2 × 10{sup 19} cm{sup −3}. The p-GaN and p-Al{sub 0.11}Ga{sub 0.89}N films show broad ultraviolet (UV) photoluminescence peaks, which intercept the valence band, supporting the presence of a Mg acceptor band. Finally, a multi-quantum-well light-emitting diode (LED) and p-i-n diode are grown, both of which demonstrate rectifying behavior with turn-on voltages of 3–3.5 V and series resistances of 6–10 Ω without the need for any post-metallization annealing. The LED exhibits violet-blue luminescence at 425 nm, while the p-i-n diode shows UV luminescence at 381 nm, and both devices still show substantial light emission even when submerged in liquid nitrogen at 77 K.« less
Diagnosing causes of extreme aerosol optical depth events
NASA Astrophysics Data System (ADS)
Bernstein, D. N.; Sullivan, R.; Crippa, P.; Thota, A.; Pryor, S. C.
2017-12-01
Aerosol burdens and optical properties exhibit substantial spatiotemporal variability, and simulation of current and possible future aerosol burdens and characteristics exhibits relatively high uncertainty due to uncertainties in emission estimates and in chemical and physical processes associated with aerosol formation, dynamics and removal. We report research designed to improve understanding of the causes and characteristics of extreme aerosol optical depth (AOD) at the regional scale, and diagnose and attribute model skill in simulating these events. Extreme AOD events over the US Midwest are selected by identifying all dates on which AOD in a MERRA-2 reanalysis grid cell exceeds the local seasonally computed 90th percentile (p90) value during 2004-2016 and then finding the dates on which the highest number of grid cells exceed their local p90. MODIS AOD data are subsequently used to exclude events dominated by wildfires. MERRA-2 data are also analyzed within a synoptic classification to determine in what ways the extreme AOD events are atypical and to identify possible meteorological `finger-prints' that can be detected in regional climate model simulations of future climate states to project possible changes in the occurrence of extreme AOD. Then WRF-Chem v3.6 is applied at 12-km resolution and regridded to the MERRA-2 resolution over eastern North America to quantify model performance, and also evaluated using in situ measurements of columnar AOD (AERONET) and near-surface PM2.5 (US EPA). Finally the sensitivity to (i) spin-up time (including procedure used to spin-up the chemistry), (ii) modal versus sectional aerosol schemes, (iii) meteorological nudging, (iv) chemistry initial and boundary conditions, and (v) anthropogenic emissions is quantified. Despite recent declines in mean AOD, supraregional (> 1000 km) extreme AOD events continue to occur. During these events AOD exceeds 0.6 in many Midwestern grid cells for multiple consecutive days. In all seasons WRF-Chem exhibits some skill in reproducing the intensity of these events, but not the precise location of the AOD maximum. Model skill is generally (but not uniformly) highest for simulations employing MOZART LBC/IBC, modal aerosol description, meteorological nudging and a 3 day spin-up, with little or no sensitivity to longer spin up times.
Boughton, Gregory K.
2014-01-01
Groundwater samples were collected from 146 shallow (less than or equal to 500 feet deep) wells for the Wyoming Groundwater-Quality Monitoring Network, from November 2009 through September 2012. Groundwater samples were analyzed for physical characteristics, major ions and dissolved solids, trace elements, nutrients and dissolved organic carbon, uranium, stable isotopes of hydrogen and oxygen, volatile organic compounds, and coliform bacteria. Selected samples also were analyzed for gross alpha radioactivity, gross beta radioactivity, radon, tritium, gasoline range organics, diesel range organics, dissolved hydrocarbon gases (methane, ethene, and ethane), and wastewater compounds. Water-quality measurements and concentrations in some samples exceeded numerous U.S. Environmental Protection Agency (EPA) drinking water standards. Physical characteristics and constituents that exceeded EPA Maximum Contaminant Levels (MCLs) in some samples were arsenic, selenium, nitrite, nitrate, gross alpha activity, and uranium. Total coliforms and Escherichia coli in some samples exceeded EPA Maximum Contaminant Level Goals. Measurements of pH and turbidity and concentrations of chloride, sulfate, fluoride, dissolved solids, aluminum, iron, and manganese exceeded EPA Secondary Maximum Contaminant Levels in some samples. Radon concentrations in some samples exceeded the alternative MCL proposed by the EPA. Molybdenum and boron concentrations in some samples exceeded EPA Health Advisory Levels. Water-quality measurements and concentrations also exceeded numerous Wyoming Department of Environmental Quality (WDEQ) groundwater standards. Physical characteristics and constituents that exceeded WDEQ Class I domestic groundwater standards in some samples were measurements of pH and concentrations of chloride, sulfate, dissolved solids, iron, manganese, boron, selenium, nitrite, and nitrate. Measurements of pH and concentrations of chloride, sulfate, dissolved solids, aluminum, iron, manganese, boron, and selenium exceeded WDEQ Class II agriculture groundwater standards in some samples. Measurements of pH and concentrations of sulfate, dissolved solids, aluminum, boron, and selenium exceeded WDEQ Class III livestock groundwater standards in some samples. The concentrations of dissolved solids in two samples exceeded the WDEQ Class IV industry groundwater standard. Measurements of pH and concentrations of dissolved solids, aluminum, iron, manganese, and selenium exceeded WDEQ Class special (A) fish and aquatic life groundwater standards in some samples. Stable isotopes of hydrogen and oxygen measured in water samples were compared to the Global Meteoric Water Line and Local Meteoric Water Lines. Results indicated that recharge to all of the wells was derived from precipitation and that the water has undergone some fractionation, possibly because of evaporation. Concentrations of organic compounds did not exceed any State or Federal water-quality standards. Few volatile organic compounds were detected in samples, whereas gasoline range organics, diesel range organics, and methane were detected most frequently. Concentrations of wastewater compounds did not exceed any State or Federal water-quality standards. The compounds N,N-diethyl-meta-toluamide (DEET), benzophenone, and phenanthrene were detected most frequently. Bacteria samples were collected, processed, incubated, and enumerated in the field or at the U.S. Geological Survey Wyoming-Montana Water Science Center. Total coliforms and Escherichia coli were detected in some samples.
Eckhardt, David A.V.; Sloto, Ronald A.
2012-01-01
Groundwater samples were collected from 15 production wells and 1 spring at 9 national park units in New York, Pennsylvania, and West Virginia in July and August 2011 and analyzed to characterize the quality of these water supplies. The sample sites generally were selected to represent areas of potential effects on water quality by drilling and development of gas wells in Marcellus Shale and Utica Shale areas of the northeastern United States. The groundwater samples were analyzed for 53 constituents, including nutrients, major inorganic constituents, trace elements, chemical oxygen demand, radioactivity, and dissolved gases, including methane and radon-222. Results indicated that the groundwater used for water supply at the selected national park units is generally of acceptable quality, although concentrations of some constituents exceeded at least one drinking-water guideline at several wells. Nine analytes were detected in concentrations that exceeded Federal drinking-water standards, mostly secondary standards that define aesthetic properties of water, such as taste and odor. One sample had an arsenic concentration that exceeded the U.S. Environmental Protection Agency maximum contaminant level (MCL) of 10 micrograms per liter (μg/L). The pH, which is a measure of acidity (hydrogen ion activity), ranged from 4.8 to 8.4, and in 5 of the 16 samples, the pH values were outside the accepted U.S. Environmental Protection Agency secondary maximum contaminant level (SMCL) range of 6.5 to 8.5. The concentration of total dissolved solids exceeded the SMCL of 500 milligrams per liter (mg/L) at four sites. The sulfate concentration exceeded the SMCL of 250 mg/L concentration in one sample, and the fluoride concentration exceeded the SMCL of 2 mg/L in one sample. Sodium concentrations exceeded the U.S. Environmental Protection Agency drinking water health advisory of 60 mg/L at four sites. Iron concentrations exceeded the SMCL of 300 μg/L in two samples, and manganese concentrations exceeded the SMCL of 50 μg/L in five samples. Radon-222 concentrations exceeded the proposed U.S. Environmental Protection Agency MCL of 300 picocuries per liter in eight samples.
NASA Astrophysics Data System (ADS)
Zhang, J.; Lin, L. F.; Bras, R. L.
2017-12-01
Hydrological applications rely on the availability and quality of precipitation products, specially model- and satellite-based products for use in areas without ground measurements. It is known that the quality of model- and satellite-based precipitation products are complementary—model-based products exhibiting high quality during winters while satellite-based products seem to be better during summers. To explore that behavior, this study uses 2-m air temperature as auxiliary information to evaluate high-resolution (0.1°×0.1° every hour) precipitation products from Weather Research and Forecasting (WRF) simulations and from version-4 Integrated Multi-satellite Retrievals for GPM (IMERG) early and final runs. The products are evaluated relative to the reference NCEP Stage IV precipitation estimates over the central United States in 2016. The results show that the WRF and IMERG final-run estimates are nearly unbiased while the IMERG early-run estimates positively biased. The results also show that the WRF estimates exhibit high correlations with the reference data when the temperature falls below 280°K and the IMERG estimates (i.e., both early and final runs) do so when the temperature exceeds 280°K. Moreover, the temperature threshold of 280°K, which distinguishes the quality of the WRF and the IMERG products, does not vary significantly with either season or location. This study not only adds insight into current precipitation research on the quality of precipitation products but also suggests a simple way for choosing either a model- or satellite-based product or a hybrid model/satellite product for applications.
Effectiveness of three bulking agents for food waste composting
DOE Office of Scientific and Technical Information (OSTI.GOV)
Adhikari, Bijaya K.; Barrington, Suzelle; Martinez, Jose
2009-01-15
Rather than landfilling, composting the organic fraction of municipal solid wastes recycles the waste as a safe and nutrient enriched soil amendment, reduces emissions of greenhouse gases and generates less leachate. The objective of this project was to investigate the composting effectiveness of three bulking agents, namely chopped wheat (Triticum) straw, chopped mature hay consisting of 80% timothy (milium) and 20% clover (triphullum) and pine (pinus) wood shavings. These bulking agents were each mixed in duplicates at three different ratios with food waste (FW) and composted for 10 days using prototype in-vessel composters to observe their temperature and pH trends.more » Then, each mixture was matured in vertical barrels for 56 days to measure their mass loss and final nutrient content and to visually evaluate their level of decomposition. Chopped wheat straw (CWS) and chopped hay (CH) were the only two formulas that reached thermophilic temperatures during the 10 days of active composting when mixed with FW at a wet mass ratio of 8.9 and 8.6:1 (FW:CWS and FW:CH), respectively. After 56 days of maturation, these two formulas were well decomposed with no or very few recognizable substrate particles, and offered a final TN exceeding the original. Wood shavings (WS) produced the least decomposed compost at maturation, with wood particles still visible in the final product, and with a TN lower than the initial. Nevertheless, all bulking agents produced compost with an organic matter, TN, TP and TK content suitable for use as soil amendment.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cummins, G.D.
This request is submitted to seek interim approval to operate a Toxic Substances Control Act (TSCA) of 1976 chemical waste landfill for the disposal of polychlorinated biphenyl (PCB) waste. Operation of a chemical waste landfill for disposal of PCB waste is subject to the TSCA regulations of 40 CFR 761. Interim approval is requested for a period not to exceed 5 years from the date of approval. This request covers only the disposal of small 10 quantities of solid PCB waste contained in decommissioned, defueled submarine reactor compartments (SRC). In addition, the request applies only to disposal 12 of thismore » waste in Trench 94 of the 218-E-12B Burial Ground (Trench 94) in the 13 200 East Area of the US Department of Energy`s (DOE) Hanford Facility. Disposal of this waste will be conducted in accordance with the Compliance 15 Agreement (Appendix H) between the DOE Richland Operations Office (DOE-RL) and 16 the US Environmental Protection Agency (EPA), Region 10. During the 5-year interim approval period, the DOE-RL will submit an application seeking final 18 approval for operation of Trench 94 as a chemical waste landfill, including 19 any necessary waivers, and also will seek a final dangerous waste permit from 20 the Washington State Department of Ecology (Ecology) for disposal of lead 21 shielding contained in the SRCS.« less
A new approach to counting measurements: Addressing the problems with ISO-11929
DOE Office of Scientific and Technical Information (OSTI.GOV)
Klumpp, John Allan; Poudel, Deepesh; Miller, Guthrie
We present an alternative approach to making counting measurements of radioactivity which offers probabilistic interpretations of the measurements. Unlike the approach in the current international standard (ISO-11929), our approach, which uses an assumed prior probability distribution of the true amount in the sample, is able to answer the question of interest for most users of the standard: “what is the probability distribution of the true amount in the sample, given the data?” The final interpretation of the measurement requires information not necessarily available at the measurement stage. However, we provide an analytical formula for what we term the “measurement strength”more » that depends only on measurement-stage count quantities. Here, we show that, when the sources are rare, the posterior odds that the sample true value exceeds ε are the measurement strength times the prior odds, independently of ε, the prior odds, and the distribution of the calibration coefficient. We recommend that the measurement lab immediately follow-up on unusually high samples using an “action threshold” on the measurement strength which is similar to the decision threshold recommended by the current standard. Finally, we further recommend that the measurement lab perform large background studies in order to characterize non constancy of background, including possible time correlation of background.« less
High Pressure Reverse Flow APS Engine
NASA Technical Reports Server (NTRS)
Senneff, J. M.
1972-01-01
A design and test demonstration effort was undertaken to evaluate the concept of the reverse flow engine for the APS engine application. The 1500 lb (6672 N) thrust engine was designed to operate on gaseous hydrogen and gaseous oxygen propellants at a mixture ratio of 4 and to achieve the objective performance of 435 sec (4266 Nsec/kg) specific impulse. Superimposed durability requirements called for a million-cycle capability with 50 hours duration. The program was undertaken as a series of tasks including the initial preliminary design, design of critical test components and finally, the design and demonstration of an altitude engine which could be used interchangeably to examine operating parameters as well as to demonstrate the capability of the concept. The program results are reported with data to indicate that all of the program objectives were met or exceeded within the course of testing on the program. The analysis effort undertaken is also reported in detail and supplemented with test data in some cases where prior definitions could not be made. The results are contained of these analyses as well as the test results conducted throughout the course of the program. Finally, the test data and analytical results were combined to allow recommendations for a flight weight design. This preliminary design effort is also detailed.
A unified method for evaluating real-time computer controllers: A case study. [aircraft control
NASA Technical Reports Server (NTRS)
Shin, K. G.; Krishna, C. M.; Lee, Y. H.
1982-01-01
A real time control system consists of a synergistic pair, that is, a controlled process and a controller computer. Performance measures for real time controller computers are defined on the basis of the nature of this synergistic pair. A case study of a typical critical controlled process is presented in the context of new performance measures that express the performance of both controlled processes and real time controllers (taken as a unit) on the basis of a single variable: controller response time. Controller response time is a function of current system state, system failure rate, electrical and/or magnetic interference, etc., and is therefore a random variable. Control overhead is expressed as a monotonically nondecreasing function of the response time and the system suffers catastrophic failure, or dynamic failure, if the response time for a control task exceeds the corresponding system hard deadline, if any. A rigorous probabilistic approach is used to estimate the performance measures. The controlled process chosen for study is an aircraft in the final stages of descent, just prior to landing. First, the performance measures for the controller are presented. Secondly, control algorithms for solving the landing problem are discussed and finally the impact of the performance measures on the problem is analyzed.
Excessive Heat Events and National Security: Building Resilience based on Early Warning Systems
NASA Astrophysics Data System (ADS)
Vintzileos, A.
2017-12-01
Excessive heat events (EHE) affect security of Nations in multiple direct and indirect ways. EHE are the top cause for morbidity/mortality associated to any atmospheric extremes. Higher energy consumption used for cooling can lead to black-outs and social disorder. EHE affect the food supply chain reducing crop yield and increasing the probability of food contamination during delivery and storage. Distribution of goods during EHE can be severely disrupted due to mechanical failure of transportation equipment. EHE during athletic events e.g., marathons, may result to a high number of casualties. Finally, EHE may also affect military planning by e.g. reducing hours of exercise and by altering combat gear. Early warning systems for EHE allow for building resilience. In this paper we first define EHE as at least two consecutive heat days; a heat day is defined as a day with a maximum heat index with probability of occurrence that exceeds a certain threshold. We then use retrospective forecasts performed with a multitude of operational models and show that it is feasible to forecast EHE at forecast lead of week-2 and week-3 over the contiguous United States. We finally introduce an improved definition of EHE based on an intensity index and investigate forecast skill of the predictive system in the tropics and subtropics.
Reusability aspects for space transportation rocket engines: programmatic status and outlook
NASA Astrophysics Data System (ADS)
Preclik, D.; Strunz, R.; Hagemann, G.; Langel, G.
2011-09-01
Rocket propulsion systems belong to the most critical subsystems of a space launch vehicle, being illustrated in this paper by comparing different types of transportation systems. The aspect of reusability is firstly discussed for the space shuttle main engine, the only rocket engine in the world that has demonstrated multiple reuses. Initial projections are contrasted against final reusability achievements summarizing three decades of operating the space shuttle main engine. The discussion is then extended to engines employed on expendable launch vehicles with an operational life requirement typically specifying structural integrities up to 20 cycles (start-ups) and an accumulated burning time of about 6,000 s (Vulcain engine family). Today, this life potential substantially exceeds the duty cycle of an expendable engine. It is actually exploited only during the development and qualification phase of an engine when system reliability is demonstrated on ground test facilities with a reduced number of hardware sets that are subjected to an extended number of test cycles and operation time. The paper will finally evaluate the logic and effort necessary to qualify a reusable engine for a required reliability and put this result in context of possible cost savings realized from reuse operations over a time span of 25 years.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hou, Bin; Ma, Xiao-Hua, E-mail: xhma@xidian.edu.cn, E-mail: yhao@xidian.edu.cn; Chen, Wei-Wei
The parameters of open-gate structures treated with different etching time were monitored during the gate recess process, and their impacts on the threshold voltage (V{sub th}) of final fabricated AlGaN/GaN high electron mobility transistors (HEMTs) based on open-gate structures were discussed in this paper. It is found that V{sub th} can exceed 0 V when channel resistance in the recessed region (R{sub on-open}) increases over ∼275 Ω mm, maximum current (I{sub Dmax}) decreases below ∼29 mA/mm, or recessed barrier thickness (t{sub RB}) is below ∼7.5 nm. In addition, t{sub RB} obtained by atomic force microscopy measurements and C-V measurements are also compared. Finally,more » theoretical common criteria based on the experimental results of this work for t{sub RB} and R{sub on-open} were established to evaluate the V{sub th} of a regular normally-off AlGaN/GaN HEMTs. The results indicate that these parameters of open-gate structure can be utilized to achieve normally-off HEMTs with controllable V{sub th}.« less
Schram, Edward; Bierman, Stijn; Teal, Lorna R.; Haenen, Olga; van de Vis, Hans; Rijnsdorp, Adriaan D.
2013-01-01
Dover sole (Solea solea) is an obligate ectotherm with a natural thermal habitat ranging from approximately 5 to 27°C. Thermal optima for growth lie in the range of 20 to 25°C. More precise information on thermal optima for growth is needed for cost-effective Dover sole aquaculture. The main objective of this study was to determine the optimal growth temperature of juvenile Dover sole (Solea solea) and in addition to test the hypothesis that the final preferendum equals the optimal growth temperature. Temperature preference was measured in a circular preference chamber for Dover sole acclimated to 18, 22 and 28°C. Optimal growth temperature was measured by rearing Dover sole at 19, 22, 25 and 28°C. The optimal growth temperature resulting from this growth experiment was 22.7°C for Dover sole with a size between 30 to 50 g. The temperature preferred by juvenile Dover sole increases with acclimation temperature and exceeds the optimal temperature for growth. A final preferendum could not be detected. Although a confounding effect of behavioural fever on temperature preference could not be entirely excluded, thermal preference and thermal optima for physiological processes seem to be unrelated in Dover sole. PMID:23613837
Park, Jae Chul; Ahn, Seung-Eon; Lee, Ho-Nyeon
2013-12-11
High-performance, low-cost amorphous gallium-indium-zinc oxide (a-GIZO) thin-film-transistor (TFT) technology is required for the next generation of active-matrix organic light-emitting diodes. A back-channel-etch structure is the most appropriate device structure for high-performance, low-cost a-GIZO TFT technology. However, channel damage due to source/drain etching and passivation-layer deposition has been a critical issue. To solve this problem, the present work focuses on overall back-channel processes, such as back-channel N2O plasma treatment, SiOx passivation deposition, and final thermal annealing. This work has revealed the dependence of a-GIZO TFT characteristics on the N2O plasma radio-frequency (RF) power and frequency, the SiH4 flow rate in the SiOx deposition process, and the final annealing temperature. On the basis of these results, a high-performance a-GIZO TFT with a field-effect mobility of 35.7 cm(2) V(-1) s(-1), a subthreshold swing of 185 mV dec(-1), a switching ratio exceeding 10(7), and a satisfactory reliability was successfully fabricated. The technology developed in this work can be realized using the existing facilities of active-matrix liquid-crystal display industries.
Mine design: Long term effects of high extraction mining
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jeran, P.W.
1996-12-31
A consideration when designing a high extraction coal mine is the effects that mining will have on the ground above the mine. This becomes particularly important when the surface has been improved or is inhabited. Surface owners are concerned about; when the effects will begin? how large will they be? and how long they will last? Each of these should be addressed by the designer. For more than a decade, the US Bureau of Mines (USBM) has been monitoring subsidence at various sites. Based upon the data gathered, some inferences may be made regarding the above stated questions. Essentially surfacemore » movement begins with undermining. The magnitude of the movements are proportional to the thickness extracted and the width of the mined area, and inversely proportional to the depth of the mine below surface. The duration of the subsidence process in the northern Appalachian Basin is approximately one year. The USBM has developed a computer model which predicts the final subsidence profile across a longwall panel in the northern Appalachian Coal Basin. USBM studies on the dynamic development of subsidence have shown that the magnitude of the deformations developed during the subsidence process never exceed those exhibited in the final subsidence profile. Use of the model will provide engineers with a starting point in the design process.« less
A new approach to counting measurements: Addressing the problems with ISO-11929
Klumpp, John Allan; Poudel, Deepesh; Miller, Guthrie
2017-12-23
We present an alternative approach to making counting measurements of radioactivity which offers probabilistic interpretations of the measurements. Unlike the approach in the current international standard (ISO-11929), our approach, which uses an assumed prior probability distribution of the true amount in the sample, is able to answer the question of interest for most users of the standard: “what is the probability distribution of the true amount in the sample, given the data?” The final interpretation of the measurement requires information not necessarily available at the measurement stage. However, we provide an analytical formula for what we term the “measurement strength”more » that depends only on measurement-stage count quantities. Here, we show that, when the sources are rare, the posterior odds that the sample true value exceeds ε are the measurement strength times the prior odds, independently of ε, the prior odds, and the distribution of the calibration coefficient. We recommend that the measurement lab immediately follow-up on unusually high samples using an “action threshold” on the measurement strength which is similar to the decision threshold recommended by the current standard. Finally, we further recommend that the measurement lab perform large background studies in order to characterize non constancy of background, including possible time correlation of background.« less
Schram, Edward; Bierman, Stijn; Teal, Lorna R; Haenen, Olga; van de Vis, Hans; Rijnsdorp, Adriaan D
2013-01-01
Dover sole (Solea solea) is an obligate ectotherm with a natural thermal habitat ranging from approximately 5 to 27°C. Thermal optima for growth lie in the range of 20 to 25°C. More precise information on thermal optima for growth is needed for cost-effective Dover sole aquaculture. The main objective of this study was to determine the optimal growth temperature of juvenile Dover sole (Solea solea) and in addition to test the hypothesis that the final preferendum equals the optimal growth temperature. Temperature preference was measured in a circular preference chamber for Dover sole acclimated to 18, 22 and 28°C. Optimal growth temperature was measured by rearing Dover sole at 19, 22, 25 and 28°C. The optimal growth temperature resulting from this growth experiment was 22.7°C for Dover sole with a size between 30 to 50 g. The temperature preferred by juvenile Dover sole increases with acclimation temperature and exceeds the optimal temperature for growth. A final preferendum could not be detected. Although a confounding effect of behavioural fever on temperature preference could not be entirely excluded, thermal preference and thermal optima for physiological processes seem to be unrelated in Dover sole.
Davis, Nathan; Danes, Jeffrey E; Vorst, Keith
2017-10-01
Post-consumer recycled (PCR) plastic material is made by collecting used plastic products (e.g., bottles and other plastic packaging materials) and reprocessing them into solid-state pellets or flakes. Plastic recycling has positive environmental benefits, but may also carry potential drawbacks due to unwanted organic and inorganic contaminants. These contaminants can migrate into food packaging made from these recycled plastic materials. The purpose of this research was to identify economically viable real-time monitoring technologies that can be used during the conversion of virgin and recycled resin feedstocks (i.e., various blends of virgin pellets and recycled solid-state pellet or mechanically ground flake) to final articles to ensure the safety, quality and sustainability of packaging feedstocks. Baseline analysis (validation) of real-time technologies was conducted using industry-standard practices for polymer analysis. The data yielded supervised predictive models developed by training sessions completed in a controlled laboratory setting. This technology can be employed to evaluate compliance and aid converters in commodity sourcing of resin without exceeding regulatory thresholds. Furthermore, this technology allowed for real-time decision and diversion strategies during the conversion of resin and flake to final articles or products to minimise the negative impact on human health and environmental exposure.
46 CFR 151.10-20 - Hull construction.
Code of Federal Regulations, 2010 CFR
2010-10-01
... reactions (if applicable) shall be determined. The hull bending stress shall not exceed the applicable... hull. In such case, the hull stress shall not exceed either 50 percent of the minimum ultimate tensile... such case, the hull stress shall not exceed the percentage stress values prescribed in § 151.10-20(b)(2...
40 CFR 264.304 - Response actions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... into the leak detection system exceeds the action leakage rate for any sump, the owner or operator must... thereafter, as long as the flow rate in the leak detection system exceeds the action leakage rate, the owner... forth the actions to be taken if the action leakage rate has been exceeded. At a minimum, the response...
40 CFR 264.253 - Response actions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... rate into the leak detection system exceeds the action leakage rate for any sump, the owner or operator... thereafter, as long as the flow rate in the leak detection system exceeds the action leakage rate, the owner... must set forth the actions to be taken if the action leakage rate has been exceeded. At a minimum, the...
40 CFR 264.223 - Response actions.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) If the flow rate into the leak detection system exceeds the action leakage rate for any sump, the... action plan must set forth the actions to be taken if the action leakage rate has been exceeded. At a... action leakage rate has been exceeded, submit to the Regional Administrator the results of the analyses...
40 CFR 265.303 - Response actions.
Code of Federal Regulations, 2010 CFR
2010-07-01
... section. (b) If the flow rate into the leak detection system exceeds the action leakage rate for any sump... response action plan must set forth the actions to be taken if the action leakage rate has been exceeded... notification that the action leakage rate has been exceeded, submit to the Regional Administrator the results...
7 CFR 29.429 - Disposition of imported tobacco exceeding pesticide residue standards.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 7 Agriculture 2 2011-01-01 2011-01-01 false Disposition of imported tobacco exceeding pesticide... Disposition of imported tobacco exceeding pesticide residue standards. Within 10 days of the receipt of test results from pesticide test samples, the Director shall notify the importer or entity responsible for the...
7 CFR 29.429 - Disposition of imported tobacco exceeding pesticide residue standards.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 7 Agriculture 2 2012-01-01 2012-01-01 false Disposition of imported tobacco exceeding pesticide... Disposition of imported tobacco exceeding pesticide residue standards. Within 10 days of the receipt of test results from pesticide test samples, the Director shall notify the importer or entity responsible for the...
7 CFR 29.429 - Disposition of imported tobacco exceeding pesticide residue standards.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 7 Agriculture 2 2014-01-01 2014-01-01 false Disposition of imported tobacco exceeding pesticide... Disposition of imported tobacco exceeding pesticide residue standards. Within 10 days of the receipt of test results from pesticide test samples, the Director shall notify the importer or entity responsible for the...
7 CFR 29.429 - Disposition of imported tobacco exceeding pesticide residue standards.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 7 Agriculture 2 2013-01-01 2013-01-01 false Disposition of imported tobacco exceeding pesticide... Disposition of imported tobacco exceeding pesticide residue standards. Within 10 days of the receipt of test results from pesticide test samples, the Director shall notify the importer or entity responsible for the...
7 CFR 29.429 - Disposition of imported tobacco exceeding pesticide residue standards.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 2 2010-01-01 2010-01-01 false Disposition of imported tobacco exceeding pesticide... Disposition of imported tobacco exceeding pesticide residue standards. Within 10 days of the receipt of test results from pesticide test samples, the Director shall notify the importer or entity responsible for the...
40 CFR 88.105-94 - Clean-fuel fleet emission standards for heavy-duty engines.
Code of Federal Regulations, 2010 CFR
2010-07-01
... exceed 3.8 grams per brake horsepower-hour. (2) Combined emissions of oxides of nitrogen and nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 3.5 grams per brake horsepower-hour when... nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 2.5 grams per brake...
40 CFR 88.105-94 - Clean-fuel fleet emission standards for heavy-duty engines.
Code of Federal Regulations, 2011 CFR
2011-07-01
... exceed 3.8 grams per brake horsepower-hour. (2) Combined emissions of oxides of nitrogen and nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 3.5 grams per brake horsepower-hour when... nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 2.5 grams per brake...
40 CFR 88.105-94 - Clean-fuel fleet emission standards for heavy-duty engines.
Code of Federal Regulations, 2013 CFR
2013-07-01
... exceed 3.8 grams per brake horsepower-hour. (2) Combined emissions of oxides of nitrogen and nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 3.5 grams per brake horsepower-hour when... nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 2.5 grams per brake...
40 CFR 88.105-94 - Clean-fuel fleet emission standards for heavy-duty engines.
Code of Federal Regulations, 2014 CFR
2014-07-01
... exceed 3.8 grams per brake horsepower-hour. (2) Combined emissions of oxides of nitrogen and nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 3.5 grams per brake horsepower-hour when... nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 2.5 grams per brake...
40 CFR 88.105-94 - Clean-fuel fleet emission standards for heavy-duty engines.
Code of Federal Regulations, 2012 CFR
2012-07-01
... exceed 3.8 grams per brake horsepower-hour. (2) Combined emissions of oxides of nitrogen and nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 3.5 grams per brake horsepower-hour when... nonmethane hydrocarbons (or nonmethane hydrocarbon equivalent) shall not exceed 2.5 grams per brake...
46 CFR 151.10-20 - Hull construction.
Code of Federal Regulations, 2012 CFR
2012-10-01
... reactions (if applicable) shall be determined. The hull bending stress shall not exceed the applicable... hull. In such case, the hull stress shall not exceed either 50 percent of the minimum ultimate tensile... such case, the hull stress shall not exceed the percentage stress values prescribed in § 151.10-20(b)(2...
40 CFR Table 7 to Subpart Sssss of... - Continuous Compliance with Emission Limits
Code of Federal Regulations, 2010 CFR
2010-07-01
... average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC... other than a thermal or catalytic oxidizer The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC performance reduction must equal or exceed 95 percent...
40 CFR Table 7 to Subpart Sssss of... - Continuous Compliance with Emission Limits
Code of Federal Regulations, 2012 CFR
2012-07-01
... average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC... other than a thermal or catalytic oxidizer The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC performance reduction must equal or exceed 95 percent...
40 CFR Table 7 to Subpart Sssss of... - Continuous Compliance with Emission Limits
Code of Federal Regulations, 2011 CFR
2011-07-01
... average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC... other than a thermal or catalytic oxidizer The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC performance reduction must equal or exceed 95 percent...
40 CFR Table 7 to Subpart Sssss of... - Continuous Compliance with Emission Limits
Code of Federal Regulations, 2014 CFR
2014-07-01
... average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC... other than a thermal or catalytic oxidizer The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC performance reduction must equal or exceed 95 percent...
40 CFR Table 7 to Subpart Sssss of... - Continuous Compliance with Emission Limits
Code of Federal Regulations, 2013 CFR
2013-07-01
... average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC... other than a thermal or catalytic oxidizer The average THC concentration must not exceed 20 ppmvd, corrected to 18 percent oxygen; OR the average THC performance reduction must equal or exceed 95 percent...
40 CFR 141.208 - Special notice for exceedance of the SMCL for fluoride.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Drinking Water Violations § 141.208 Special notice for exceedance of the SMCL for fluoride. (a) When is the special notice to be given? Community water systems that exceed the fluoride secondary maximum contaminant..., fluoride can help prevent cavities, but children drinking water containing more than 2 milligrams per liter...
40 CFR 141.208 - Special notice for exceedance of the SMCL for fluoride.
Code of Federal Regulations, 2012 CFR
2012-07-01
... Drinking Water Violations § 141.208 Special notice for exceedance of the SMCL for fluoride. (a) When is the special notice to be given? Community water systems that exceed the fluoride secondary maximum contaminant..., fluoride can help prevent cavities, but children drinking water containing more than 2 milligrams per liter...
40 CFR 141.208 - Special notice for exceedance of the SMCL for fluoride.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Drinking Water Violations § 141.208 Special notice for exceedance of the SMCL for fluoride. (a) When is the special notice to be given? Community water systems that exceed the fluoride secondary maximum contaminant..., fluoride can help prevent cavities, but children drinking water containing more than 2 milligrams per liter...
21 CFR 172.840 - Polysorbate 80.
Code of Federal Regulations, 2013 CFR
2013-04-01
... in combination, does not exceed 0.1 percent of the finished frozen dessert. (2) In yeast-defoamer formulations whereby the maximum amount of the additive does not exceed 4 percent of the finished yeast defoamer and the maximum amount of the additive in the yeast from such use does not exceed 4 parts per...
21 CFR 172.840 - Polysorbate 80.
Code of Federal Regulations, 2012 CFR
2012-04-01
... in combination, does not exceed 0.1 percent of the finished frozen dessert. (2) In yeast-defoamer formulations whereby the maximum amount of the additive does not exceed 4 percent of the finished yeast defoamer and the maximum amount of the additive in the yeast from such use does not exceed 4 parts per...
26 CFR 49.4263-2 - Charges not exceeding 60 cents.
Code of Federal Regulations, 2012 CFR
2012-04-01
... not exceeding 60 cents. (a) In general. The tax imposed by section 4261 does not apply to... round trip does not exceed 60 cents. (c) Charters. An amount paid for the charter of a car, train, motor...) Seating or sleeping accommodations. Any amount paid for seating or sleeping accommodations is not subject...
26 CFR 49.4263-2 - Charges not exceeding 60 cents.
Code of Federal Regulations, 2011 CFR
2011-04-01
... not exceeding 60 cents. (a) In general. The tax imposed by section 4261 does not apply to... round trip does not exceed 60 cents. (c) Charters. An amount paid for the charter of a car, train, motor...) Seating or sleeping accommodations. Any amount paid for seating or sleeping accommodations is not subject...
26 CFR 49.4263-2 - Charges not exceeding 60 cents.
Code of Federal Regulations, 2013 CFR
2013-04-01
... not exceeding 60 cents. (a) In general. The tax imposed by section 4261 does not apply to... round trip does not exceed 60 cents. (c) Charters. An amount paid for the charter of a car, train, motor...) Seating or sleeping accommodations. Any amount paid for seating or sleeping accommodations is not subject...
26 CFR 49.4263-2 - Charges not exceeding 60 cents.
Code of Federal Regulations, 2010 CFR
2010-04-01
... not exceeding 60 cents. (a) In general. The tax imposed by section 4261 does not apply to... round trip does not exceed 60 cents. (c) Charters. An amount paid for the charter of a car, train, motor...) Seating or sleeping accommodations. Any amount paid for seating or sleeping accommodations is not subject...
50 CFR 648.162 - Minimum fish sizes.
Code of Federal Regulations, 2011 CFR
2011-10-01
... that the ACL specified by the process outlined in § 648.160(a) will not be exceeded: (1) A fishery... necessary to ensure that the ACL will not be exceeded. The MAFMC shall review these recommendations and... September 1 measures necessary to ensure that the applicable ACL will not be exceeded. The MAFMC's...
40 CFR 141.208 - Special notice for exceedance of the SMCL for fluoride.
Code of Federal Regulations, 2011 CFR
2011-07-01
... SMCL for fluoride. 141.208 Section 141.208 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Drinking Water Violations § 141.208 Special notice for exceedance of the SMCL for fluoride. (a) When is the special notice to be given? Community water systems that exceed the fluoride secondary maximum contaminant...
40 CFR 141.208 - Special notice for exceedance of the SMCL for fluoride.
Code of Federal Regulations, 2010 CFR
2010-07-01
... SMCL for fluoride. 141.208 Section 141.208 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Drinking Water Violations § 141.208 Special notice for exceedance of the SMCL for fluoride. (a) When is the special notice to be given? Community water systems that exceed the fluoride secondary maximum contaminant...
vehicles equipped with idle reduction technology may exceed the state's gross and axle weight limits by up vehicle primarily powered by natural gas may exceed the state's gross vehicle weight limits by a weight maximum gross weight may not exceed 82,000 lbs. (Reference New Mexico Statutes 66-7-4
Code of Federal Regulations, 2012 CFR
2012-10-01
...) Leakage from the main air reservoir and related piping may not exceed an average of 3 pounds per square.... (b) Brake pipe leakage may not exceed 5 pounds per square inch per minute. (c) With a full service... pneumatically operated controls may not exceed an average of 3 pounds per square inch per minute for 3 minutes...
Code of Federal Regulations, 2014 CFR
2014-10-01
...) Leakage from the main air reservoir and related piping may not exceed an average of 3 pounds per square.... (b) Brake pipe leakage may not exceed 5 pounds per square inch per minute. (c) With a full service... pneumatically operated controls may not exceed an average of 3 pounds per square inch per minute for 3 minutes...
Code of Federal Regulations, 2013 CFR
2013-10-01
...) Leakage from the main air reservoir and related piping may not exceed an average of 3 pounds per square.... (b) Brake pipe leakage may not exceed 5 pounds per square inch per minute. (c) With a full service... pneumatically operated controls may not exceed an average of 3 pounds per square inch per minute for 3 minutes...
Code of Federal Regulations, 2010 CFR
2010-10-01
...) Leakage from the main air reservoir and related piping may not exceed an average of 3 pounds per square.... (b) Brake pipe leakage may not exceed 5 pounds per square inch per minute. (c) With a full service... pneumatically operated controls may not exceed an average of 3 pounds per square inch per minute for 3 minutes...
Code of Federal Regulations, 2011 CFR
2011-10-01
...) Leakage from the main air reservoir and related piping may not exceed an average of 3 pounds per square.... (b) Brake pipe leakage may not exceed 5 pounds per square inch per minute. (c) With a full service... pneumatically operated controls may not exceed an average of 3 pounds per square inch per minute for 3 minutes...
33 CFR 117.585 - Acushnet River.
Code of Federal Regulations, 2010 CFR
2010-07-01
... vessels whose draft exceeds 15 feet, for vessels owned or operated by the U.S. Government, the State of Massachusetts, or by local authorities. (c) Each opening of the draw, from the time vehicular traffic flow is stopped until the flow resumes, shall not exceed 15 minutes except for vessels whose draft exceeds 15 feet...
21 CFR 524.660b - Dimethyl sulfoxide gel.
Code of Federal Regulations, 2010 CFR
2010-04-01
... grams per day. Total duration of therapy should not exceed 30 days. (ii) Dogs. Administer 3 or 4 times daily in an amount not to exceed 20 grams per day. Total duration of therapy should not exceed 14 days. (3) Limitations. Do not use in horses and dogs intended for breeding purposes or in horses...
Radiofrequency Exposures of Workers on Low-Power FM Radio Transmitters.
Valic, Blaž; Kos, Bor; Gajšek, Peter
2017-05-01
Low-power radio transmitters are one of the most common radio frequency sources and the exposure limit values (ELVs) for occupational exposure may be exceeded close to them. Therefore, a detailed analysis and assessment of occupational exposure in their vicinity is presented in the paper. For 20 different exposure scenarios, electric field strength and specific absorption rate (SAR) values were computed to determine whether the action levels (ALs) and ELVs of the European directive 2013/35/EU are exceeded for different 500 W radio transmitters. The results show that the ALs are very conservative for such exposure situations. Even when the ALs are greatly exceeded, the SAR values are not necessarily above the limit. However, in some situations, the ELVs were also exceeded. The local 10 g averaged value of the SAR can be exceeded if the worker is grounded (in direct contact with the steel structure), while the whole body ELVs can be exceeded for exposures at distances of <1 m from the transmitting dipole array antennas. © The Author 2017. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.
Lake-level frequency analysis for Devils Lake, North Dakota
Wiche, Gregg J.; Vecchia, Aldo V.
1996-01-01
Two approaches were used to estimate future lake-level probabilities for Devils Lake. The first approach is based on an annual lake-volume model, and the second approach is based on a statistical water mass-balance model that generates seasonal lake volumes on the basis of seasonal precipitation, evaporation, and inflow. Autoregressive moving average models were used to model the annual mean lake volume and the difference between the annual maximum lake volume and the annual mean lake volume. Residuals from both models were determined to be uncorrelated with zero mean and constant variance. However, a nonlinear relation between the residuals of the two models was included in the final annual lakevolume model.Because of high autocorrelation in the annual lake levels of Devils Lake, the annual lake-volume model was verified using annual lake-level changes. The annual lake-volume model closely reproduced the statistics of the recorded lake-level changes for 1901-93 except for the skewness coefficient. However, the model output is less skewed than the data indicate because of some unrealistically large lake-level declines. The statistical water mass-balance model requires as inputs seasonal precipitation, evaporation, and inflow data for Devils Lake. Analysis of annual precipitation, evaporation, and inflow data for 1950-93 revealed no significant trends or long-range dependence so the input time series were assumed to be stationary and short-range dependent.Normality transformations were used to approximately maintain the marginal probability distributions; and a multivariate, periodic autoregressive model was used to reproduce the correlation structure. Each of the coefficients in the model is significantly different from zero at the 5-percent significance level. Coefficients relating spring inflow from one year to spring and fall inflows from the previous year had the largest effect on the lake-level frequency analysis.Inclusion of parameter uncertainty in the model for generating precipitation, evaporation, and inflow indicates that the upper lake-level exceedance levels from the water mass-balance model are particularly sensitive to parameter uncertainty. The sensitivity in the upper exceedance levels was caused almost entirely by uncertainty in the fitted probability distributions of the quarterly inflows. A method was developed for using long-term streamflow data for the Red River of the North at Grand Forks to reduce the variance in the estimated mean.Comparison of the annual lake-volume model and the water mass-balance model indicates the upper exceedance levels of the water mass-balance model increase much more rapidly than those of the annual lake-volume model. As an example, for simulation year 5, the 99-percent exceedance for the lake level is 1,417.6 feet above sea level for the annual lake-volume model and 1,423.2 feet above sea level for the water mass-balance model. The rapid increase is caused largely by the record precipitation and inflow in the summer and fall of 1993. Because the water mass-balance model produces lake-level traces that closely match the hydrology of Devils Lake, the water mass-balance model is superior to the annual lake-volume model for computing exceedance levels for the 50-year planning horizon.
Lake-level frequency analysis for Devils Lake, North Dakota
Wiche, Gregg J.; Vecchia, Aldo V.
1995-01-01
Two approaches were used to estimate future lake-level probabilities for Devils Lake. The first approach is based on an annual lake-volume model, and the second approach is based on a statistical water mass-balance model that generates seasonal lake volumes on the basis of seasonal precipitation, evaporation, and inflow.Autoregressive moving average models were used to model the annual mean lake volume and the difference between the annual maximum lake volume and the annual mean lake volume. Residuals from both models were determined to be uncorrelated with zero mean and constant variance. However, a nonlinear relation between the residuals of the two models was included in the final annual lake-volume model.Because of high autocorrelation in the annual lake levels of Devils Lake, the annual lakevolume model was verified using annual lake-level changes. The annual lake-volume model closely reproduced the statistics of the recorded lake-level changes for 1901-93 except for the skewness coefficient However, the model output is less skewed than the data indicate because of some unrealistically large lake-level declines.The statistical water mass-balance model requires as inputs seasonal precipitation, evaporation, and inflow data for Devils Lake. Analysis of annual precipitation, evaporation, and inflow data for 1950-93 revealed no significant trends or long-range dependence so the input time series were assumed to be stationary and short-range dependent.Normality transformations were used to approximately maintain the marginal probability distributions; and a multivariate, periodic autoregressive model was used to reproduce the correlation structure. Each of the coefficients in the model is significantly different from zero at the 5-percent significance level. Coefficients relating spring inflow from one year to spring and fall inflows from the previous year had the largest effect on the lake-level frequency analysis.Inclusion of parameter uncertainty in the model for generating precipitation, evaporation, and inflow indicates that the upper lake-level exceedance levels from the water mass-balance model are particularly sensitive to parameter uncertainty. The sensitivity in the upper exceedance levels was caused almost entirely by uncertainty in the fitted probability distributions of the quarterly inflows. A method was developed for using long-term streamflow data for the Red River of the North at Grand Forks to reduce the variance in the estimated mean. Comparison of the annual lake-volume model and the water mass-balance model indicates the upper exceedance levels of the water mass-balance model increase much more rapidly than those of the annual lake-volume model. As an example, for simulation year 5, the 99-percent exceedance for the lake level is 1,417.6 feet above sea level for the annual lake-volume model and 1,423.2 feet above sea level for the water mass-balance model. The rapid increase is caused largely by the record precipitation and inflow in the summer and fall of 1993. Because the water mass-balance model produces lake-level traces that closely match the hydrology of Devils Lake, the water mass-balance model is superior to the annual lake-volume model for computing exceedance levels for the 50-year planning horizon.