Processed kaolin affects the probing and settling behavior of Diaphorina citri (Hemiptera: Lividae).

PubMed

Miranda, Marcelo P; Zanardi, Odimar Z; Tomaseto, Arthur F; Volpe, Haroldo Xl; Garcia, Rafael B; Prado, Ernesto

2018-03-05

Alternative methods that have the potential to reduce the entry of Diaphorina citri Kuwayama (Hemiptera: Liviidae), the major citrus pest worldwide, into commercial groves could be a viable approach for huanglongbing management. Kaolin is an aluminum silicate that when sprayed on plants forms a white particle film that interferes with host recognition by the insects. Diaphorina citri orients towards the host plants by visual and olfactory cues. The purpose of the study was to determine the effect of processed kaolin on D. citri settling (no-choice) and probing behavior [electrical penetration graph (EPG) technique] under laboratory conditions, and to study its host plant finding ability and dispersal under field conditions in the absence and presence of young shoots. Under laboratory conditions, kaolin caused an overall reduction of 40% in the number of psyllids settled on treated seedlings; furthermore, the proportion of individuals that were able to reach the phloem was 50% lower on kaolin-treated plants than on untreated plants. In the field, the plant finding ability of D. citri was disrupted on kaolin-treated trees (overall reduction of 96%), regardless of the vegetative condition, and psyllid dispersal was slower in kaolin-treated plots than in the untreated control. This study clearly demonstrates that processed kaolin interferes negatively with different aspects of the host plant finding ability of D. citri. These findings suggest that processed kaolin has a high potential to reduce huanglongbing primary infection. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

Opportunities for recovery at work and excellent work ability - a cross-sectional population study among young workers.

PubMed

Boström, Maria; Sluiter, Judith K; Hagberg, Mats; Grimby-Ekman, Anna

2016-09-15

Better opportunities for recovery at work are thought to be associated with work ability in a young workforce but evidence is scarce to lacking. The aim of this study was to examine cross-sectional associations between opportunities for recovery at work and excellent work ability among young workers and specifically for young workers with high work demands. A study group of 1295 women and 1056 men aged 18-29 years was selected from three biennial years of a population cohort. The subsample reporting high work demands consisted of 439 women and 349 men. The study group had completed a work environment questionnaire in a survey conducted by Statistics Sweden. Associations between opportunities for recovery at work and excellent work ability were assessed by multiple logistic regression models stratified for gender. Having varied work was associated with excellent work ability in all young men (p < 0.0006; prevalence ratio [PR] 1.3) and also specifically in men with high work demands (p = 0.019; PR 1.3). For the latter group the possibility of deciding when to perform a work task was also associated with excellent work ability (p = 0.049; PR 1.3). Among young women with high work demands, the possibility of deciding one's working hours was associated with excellent work ability (p = 0.046; PR 1.2). For young men, having varied work can contribute to excellent work ability. In addition, for men with high work demands, the possibility of deciding when to perform a work task may be favourable for excellent work ability. For young women with high work demands, the possibility of deciding one's working hours can contribute to excellent work ability. Employers could use these opportunities for recovery in promoting work ability among young workers.

Characteristics and settling behaviour of particles from blast furnace flue gas washing.

PubMed

Kiventerä, Jenni; Leiviskä, Tiina; Keski-Ruismäki, Kirsi; Tanskanen, Juha

2016-05-01

A lot of particles from iron-making are removed with blast furnace off-gas and routed to the gas cleaning system. As water is used for cleaning the gas, the produced wash water contains a large amount of particles such as valuable Fe and C. However, the presence of zinc prevents recycling. In addition, the high amount of calcium results in uncontrolled scaling. Therefore, the properties of the wash water from scrubber and sludge, from the Finnish metal industry (SSAB Raahe), were evaluated in this study. Size fractionation of wash water revealed that Fe, Zn, Al, Mn, V, Cr and Cd appeared mainly in the larger fractions (>1.2 μm) and Na, Mg, Si, Ni, K, Cu and As appeared mainly in the smaller fractions (<1.2 μm) or in dissolved form. Calcium was found both in the larger fractions and dissolved (∼60 mg/L). Most of the particles in wash water were included in the 1.2-10 μm particle size and were settled effectively. However, a clear benefit was observed when using a chemical to enhance particle settling. In comparison to 2.5 h of settling without chemical, the turbidity was further decreased by about 94%, iron 85% and zinc 50%. Coagulation-flocculation experiments indicated that both low and high molecular weight cationic polymers could provide excellent purification results in terms of turbidity. Calcium should be removed by other methods. The particles in sludge were mostly in the 2-4 μm or 10-20 μm fractions. Further sludge settling resulted in high solids removal. Copyright © 2016 Elsevier Ltd. All rights reserved.

77 FR 24981 - Notice of Lodging of Consent Decree Under the Comprehensive Environmental Response, Compensation...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... substances at the Crescent Plating Works Superfund Site in Chicago, Illinois, pursuant to Section 107 of the... of $40,000, based upon the Settling Defendant's ability to pay. The Department of Justice will...

Long term operation of continuous-flow system with enhanced biological phosphorus removal granules at different COD loading.

PubMed

Li, Dong; Lv, Yufeng; Zeng, Huiping; Zhang, Jie

2016-09-01

In this study, a continuous-flow system with enhanced biological phosphorus removal (EBPR) granules was operated at different COD concentrations (200, 300 and 400mgL(-)(1)) to investigate the effect of COD loading on this system. The results showed that when the COD concentration in influent was increased to 400mgL(-)(1), the anaerobic COD removal efficiency and total phosphorus removal efficiency reduced obviously and the settling ability of granules deteriorated due to the proliferation of filamentous bacteria. Moreover, high COD loading inhibited the EPS secretion and destroyed the stability of granules. Results of high-through pyrosequencing indicated that filamentous bacteria had a competitive advantage over polyphosphate-accumulating organisms (PAOs) at high COD loading. The performance of system, settling ability of granules and proportion of PAOs gradually recovered to the initial level after the COD concentration was reduced to 200mgL(-)(1) on day 81. Copyright © 2016 Elsevier Ltd. All rights reserved.

Microstructural indicators of convection: insights from the Little Minch Sill Complex, Scotland

NASA Astrophysics Data System (ADS)

Nicoli, Gautier; Holness, Marian; Neufeld, Jerome; Farr, Robert

2017-04-01

The fluid dynamic behaviour of crystal-bearing magmas is a key parameter to understand the formation of magmatic bodies. There are two opposite views on the subject: Some argue that solidification in intrusive bodies is affected by convection whereas others claim solidification happens in a static environment. A consensus on the question may be reached by carefully studying the grain size distribution in the settled accumulations of cargo crystals. In the absence of significant crystal growth or particle coarsening by agglomeration, settling of a polydisperse crystal load will always result in a fining-upwards sequence in static magmas as well as in convecting environments. If we assume the particle concentration is always sufficiently low to prevent hindered settling, gravitational settling in a static magma leads to the settling of individual crystals at a constant rate determined by their Stokes' velocity. Each size class is deposited at a constant rate, until all the grains of that size class have fallen out of suspension, leading to a well-stratified sequence and the complete disappearance of progressively smaller size classes upwards in the accumulation. In contrast, in a vigorously convecting magma crystals settle when they enter the stagnant basal boundary layer. In a system containing a polydisperse crystal population most of the bigger particles are removed rapidly from the bulk magma, leading to the creation of a fining-upwards sequence on the floor. However, in detail the structure of this fining-upwards sequence is critically different from that created by settling from a stagnant magma, with the gradual phasing out of each size class instead of the abrupt termination of size classes seen in static systems. This provides us with the opportunity to distinguish between settling from static or convecting magma using the spatial variation of grain size in settled accumulations. We focus on the Little Minch Sill Complex in Scotland, which formed from olivine-phyric magma and is characterised by both composite and single-injection bodies with significant accumulation of olivine on their lower margins. Comparison of the fining-upwards sequences in the picrodolerite/crinanite unit of the composite Shiant Isles Main Sill,and related single-injection sills on the Trotternish Peninsula, Skye, illustrate the ability of this method to distinguish between convecting and non-convecting magma bodies.

Packing properties of starch-based powders under mild mechanical stress.

PubMed

Zanardi, I; Gabbrielli, A; Travagli, V

2009-07-01

This study reports the ability to settle of commercial pharmaceutical grade starch samples, both native and pregelatinized. The experiments were carried out under different relative humidity (RH%) conditions and the packing properties were evaluated using both official pharmacopoeial monograph conditions and also modified conditions in order to give a deeper knowledge of tapping under mild mechanical stress. The technique adopted, simulating common pharmaceutical operating practices, appears to be useful to estimate some technologically relevant features of diluent powder materials. Moreover, a general mathematical function has been applied to the experimental data; this could be appropriate for adequately describing material settling patterns and offers practical parameters for characterizing starch powders within the context of a pharmaceutical quality system.

Visual Processing in Generally Gifted and Mathematically Excelling Adolescents

ERIC Educational Resources Information Center

Paz-Baruch, Nurit; Leikin, Roza; Leikin, Mark

2016-01-01

Little empirical data are available concerning the cognitive abilities of gifted individuals in general and especially those who excel in mathematics. We examined visual processing abilities distinguishing between general giftedness (G) and excellence in mathematics (EM). The research population consisted of 190 students from four groups of 10th-…

Mobility and settling rate of agglomerates of polydisperse nanoparticles.

PubMed

Spyrogianni, Anastasia; Karadima, Katerina S; Goudeli, Eirini; Mavrantzas, Vlasis G; Pratsinis, Sotiris E

2018-02-14

Agglomerate settling impacts nanotoxicology and nanomedicine as well as the stability of engineered nanofluids. Here, the mobility of nanostructured fractal-like SiO 2 agglomerates in water is investigated and their settling rate in infinitely dilute suspensions is calculated by a Brownian dynamics algorithm tracking the agglomerate translational and rotational motion. The corresponding friction matrices are obtained using the HYDRO++ algorithm [J. G. de la Torre, G. del Rio Echenique, and A. Ortega, J. Phys. Chem. B 111, 955 (2007)] from the Kirkwood-Riseman theory accounting for hydrodynamic interactions of primary particles (PPs) through the Rotne-Prager-Yamakawa tensor, properly modified for polydisperse PPs. Agglomerates are generated by an event-driven method and have constant mass fractal dimension but varying PP size distribution, mass, and relative shape anisotropy. The calculated diffusion coefficient from HYDRO++ is used to obtain the agglomerate mobility diameter d m and is compared with that from scaling laws for fractal-like agglomerates. The ratio d m /d g of the mobility diameter to the gyration diameter of the agglomerate decreases with increasing relative shape anisotropy. For constant d m and mean d p , the agglomerate settling rate, u s , increases with increasing PP geometric standard deviation σ p,g (polydispersity). A linear relationship between u s and agglomerate mass to d m ratio, m/d m , is revealed and attributed to the fast Brownian rotation of such small and light nanoparticle agglomerates. An analytical expression for the u s of agglomerates consisting of polydisperse PPs is then derived, u s =1-ρ f ρ p g3πμmd m (ρ f is the density of the fluid, ρ p is the density of PPs, μ is the viscosity of the fluid, and g is the acceleration of gravity), valid for agglomerates for which the characteristic rotational time is considerably shorter than their settling time. Our calculations demonstrate that the commonly made assumption of monodisperse PPs underestimates u s by a fraction depending on σ p,g and agglomerate mass mobility exponent. Simulations are in excellent agreement with deposition rate measurements of fumed SiO 2 agglomerates in water.

Mobility and settling rate of agglomerates of polydisperse nanoparticles

NASA Astrophysics Data System (ADS)

Spyrogianni, Anastasia; Karadima, Katerina S.; Goudeli, Eirini; Mavrantzas, Vlasis G.; Pratsinis, Sotiris E.

2018-02-01

Agglomerate settling impacts nanotoxicology and nanomedicine as well as the stability of engineered nanofluids. Here, the mobility of nanostructured fractal-like SiO2 agglomerates in water is investigated and their settling rate in infinitely dilute suspensions is calculated by a Brownian dynamics algorithm tracking the agglomerate translational and rotational motion. The corresponding friction matrices are obtained using the HYDRO++ algorithm [J. G. de la Torre, G. del Rio Echenique, and A. Ortega, J. Phys. Chem. B 111, 955 (2007)] from the Kirkwood-Riseman theory accounting for hydrodynamic interactions of primary particles (PPs) through the Rotne-Prager-Yamakawa tensor, properly modified for polydisperse PPs. Agglomerates are generated by an event-driven method and have constant mass fractal dimension but varying PP size distribution, mass, and relative shape anisotropy. The calculated diffusion coefficient from HYDRO++ is used to obtain the agglomerate mobility diameter dm and is compared with that from scaling laws for fractal-like agglomerates. The ratio dm/dg of the mobility diameter to the gyration diameter of the agglomerate decreases with increasing relative shape anisotropy. For constant dm and mean dp, the agglomerate settling rate, us, increases with increasing PP geometric standard deviation σp,g (polydispersity). A linear relationship between us and agglomerate mass to dm ratio, m/dm, is revealed and attributed to the fast Brownian rotation of such small and light nanoparticle agglomerates. An analytical expression for the us of agglomerates consisting of polydisperse PPs is then derived, us=(1/-{ρf/ρp})g 3 π μ m/dm (ρf is the density of the fluid, ρp is the density of PPs, μ is the viscosity of the fluid, and g is the acceleration of gravity), valid for agglomerates for which the characteristic rotational time is considerably shorter than their settling time. Our calculations demonstrate that the commonly made assumption of monodisperse PPs underestimates us by a fraction depending on σp,g and agglomerate mass mobility exponent. Simulations are in excellent agreement with deposition rate measurements of fumed SiO2 agglomerates in water.

Do mental skills make champions? Examining the discriminant function of the psychological characteristics of developing excellence questionnaire.

PubMed

Macnamara, Aine; Collins, Dave

2013-01-01

The ability to successfully develop to the highest levels in sport is dependent on a range of variables, not least an individual's ability to cope with the various challenges of development. Psychological Characteristics of Developing Excellence (PCDEs) include both the trait characteristics and the state-deployed skills that have been shown to play a crucial role in the realisation of potential. Psychological characteristics of developing excellence equip aspiring elites with the mental skills, attitudes, and emotions to cope with the challenges of the development pathway, as well as underpinning their capacity to make the most of their innate abilities. The Psychological Characteristics of Developing Excellence Questionnaire (PCDEQ) was designed to assess the possession and deployment of these characteristics. The purpose of this paper was to examine the ability of the Psychological Characteristics of Developing Excellence Questionnaire to effectively discriminate between good and poor developers based on their current possession and deployment of psychological characteristics of developing excellence. Two hundred and eighty-five athletes (n = 192 team athletes; n = 93 individual athletes) completed the Psychological Characteristics of Developing Excellence Questionnaire. Results from the discriminant function analysis suggest that the Psychological Characteristics of Developing Excellence Questionnaire correctly classifies between 67% and 75% of athletes based on their responses. The Psychological Characteristics of Developing Excellence Questionnaire can be used as a formative assessment tool to direct training programmes by identifying weaknesses in psychological characteristics of developing excellence and incorporating specific training to address these weaknesses in advance of developmental challenges.

Acclimatization process of tofu wastewater on hybrid upflow anaerobic sludge blanket reactor using polyvinyl chloride rings as a growth medium

NASA Astrophysics Data System (ADS)

Yanqoritha, Nyimas; Turmuzi, Muhammad; Derlini

2017-05-01

The appropriate process to resolve sewage contamination which have a high organic using anaerobic technology. Hybrid Upflow Anaerobic Sludge Blanket reactor is one of the anaerobic process which consists of a suspended growth media and attached growth media. The reactor has the ability to work at high load rate, sludge produced easily settles, high biomass and the separation of gas, solid and liquid excelent. The purpose of research is to study the acclimatization process in the reactor of Hybrid Upflow Anaerobic Sludge Blanket using a polyvinl chloride ring as the attached growth medium. Reactor of Hybrid Upflow Anaerobic Sludge Blanket use a working volume of 8.6 L. The operation consisting of 3 L suspended reactor and 5.6 L attached reactor. Acclimatization is conducted by providing the substrate from the smallest concentration of COD up to a concentration that will be processed. During the 50th day, acclimatization process assumed the bacteria begin to work, indicated by the dissolved COD and VSS decrease and biogas production. Due to the wastewater containing the high of protein in consequence operational parameters should be controlled and some precautions should be taken to prevent process partially or totally inhibited.

77 FR 69913 - Self-Regulatory Organizations; Fixed Income Clearing Corporation; Notice of Filing of Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

... to enhance the NOS for SPTs by no longer requiring the current face value submitted on each member's NOS to exactly match the current face value of the SPT. Instead, members will have the ability to submit and match multiple NOS to reduce the SPT current face until it is fully settled. For example, if a...

Steven Mufson, Brian Vastag, and The Washington Post Graphics Staff Receive 2012 David Perlman Award for Excellence in Science Journalism-News: Response

NASA Astrophysics Data System (ADS)

Mufson, Steven; Vastag, Brian; Graphics Staff, Washington Post

2013-01-01

When the Washington Post's fifth floor newsroom began to sway one slow afternoon last August, my colleague Joel Achenbach barked, "That's an earthquake." It was good to put a name on this strange movement; I had never felt anything like it. The building swayed, then shook. One reporter ducked under his desk and I started to do the same. Before I could scoot my rear end to safety though, the shaking stopped and the building settled. The great East Coast quake was over.

Colstrip, Montana: The Fiscal Effects of Recent Coal Development and an Evaluation of the Community's Ability to Handle Further Expansion.

ERIC Educational Resources Information Center

Johnson, Maxine C.; White, Randle V.

Much of the coal development in eastern Montana has occured in or is proposed for sparsely settled Rosebud County, which includes the Colstrip elementary and high school districts. Between fiscal 1966 and 1975, the population growth resulting from coal activities has brought about a 68% real increase in Rosebud County expenditures. Increase in…

Settling for less out of fear of being single.

PubMed

Spielmann, Stephanie S; MacDonald, Geoff; Maxwell, Jessica A; Joel, Samantha; Peragine, Diana; Muise, Amy; Impett, Emily A

2013-12-01

The present research demonstrates that fear of being single predicts settling for less in romantic relationships, even accounting for constructs typically examined in relationship research such as anxious attachment. Study 1 explored the content of people's thoughts about being single. Studies 2A and 2B involved the development and validation of the Fear of Being Single Scale. Study 2C provided preliminary support for the hypothesis that fear of being single predicts settling for less in ongoing relationships, as evidenced by greater dependence in unsatisfying relationships. Study 3 replicated this effect in a longitudinal study demonstrating that fear of being single predicts lower likelihood of initiating the dissolution of a less satisfying relationship. Studies 4A and 4B explored the predictive ability of fear of being single for self-reported dating standards. Across both samples, fear of being single was unrelated to self-reported standards for a mate, with the exception of consistently higher standards for parenting. Studies 5 and 6 explored romantic interest in targets that were manipulated to vary in responsiveness and physical attractiveness. These studies found that fear of being single consistently predicted romantic interest in less responsive and less attractive dating targets. Study 7 explored fear of being single during a speed-dating event. We found that fear of being single predicted being less selective in expressing romantic interest but did not predict other daters' romantic interest. Taken together, the present research suggests that fear of being single is a meaningful predictor of settling for less in relationships. PsycINFO Database Record (c) 2013 APA, all rights reserved.

[Construction of competency model of 'excellent doctor' in Chinese medicine].

PubMed

Jin, Aning; Tian, Yongquan; Zhao, Taiyang

2014-05-01

To evaluate outstanding and ordinary persons from personal characteristics using competency as the important criteria, which is the future direction of medical education reform. We carried on a behavior event interview about famous doctors of old traditional Chinese medicine, compiled competency dictionary, proceed control prediction test. SPSS and AMOS were used to be data analysis tools on statistics. We adopted the model of peer assessment and contrast to carry out empirical research. This project has carried on exploratory factor analysis and confirmatory factor analysis, established a "5A" competency model which include moral ability, thinking ability, communication ability, learning and practical ability. Competency model of "excellent doctor" in Chinese medicine has been validated, with good reliability and validity, and embodies the characteristics of traditional Chinese medicine personnel training, with theoretical and practical significance for excellence in medicine physician training.

A new magnetic compound fluid slurry and its performance in magnetic field-assisted polishing of oxygen-free copper

NASA Astrophysics Data System (ADS)

Wang, Youliang; Wu, Yongbo; Guo, Huiru; Fujimoto, Masakazu; Nomura, Mitsuyoshi; Shimada, Kunio

2015-05-01

In nano-precision surface finishing of engineering materials using MCF (magnetic compound fluid) slurry, the water-based MCF slurry is preferable from the viewpoint of the environmental issue and the running cost of cleaning workpiece and equipment. However, the uncoated-CIPs (carbonyl-iron-powders) within the conventional MCF slurry have low ability against aqueous corrosion, leading to the performance deterioration and working life shortening of the conventional MCF slurry. This study proposed a new MCF slurry containing ZrO2-coated CIPs instead of the uncoated CIPs. Its performance in the polishing of oxygen-free copper was compared experimentally with that of the conventional one. The results showed that the work-surface finish polished with the new slurry was in the same level as that with the conventional one when the slurry was used soon after prepared, i.e., the settling time was 0 min; however, as the settling time increased the uncoated-CIPs got rusty, leading to a deterioration in the slurry performance. By contrast, no rust was observed on ZrO2-coated CIPs even the settling time reached several days, indicating the employment of ZrO2-coated CIPs prolonged the working-life of the MCF slurry greatly.

Observation vs. theory: testing the synthetic IR colours of young very low mass stars/brown dwarfs using the evolutionary tracks

NASA Astrophysics Data System (ADS)

Tottle, Jonathan; Mohanty, Subhanjoy

2013-07-01

Our ability to accurately derive stellar properties from spectral energy distributions (SEDs) depends on how well they can be fit with atmospheric models. The AMES-Dusty synthetic spectra (Allard et al., 2001), which incorporate dust grains suspended in the stellar atmosphere, are commonly used to fit SEDs of very low mass stars (VLMS) and brown dwarfs (BDs). Recently, the same group has produced an updated model named BT-Settl (Allard et al., 2012) that allow these grains to gradually settle out of the atmosphere at cooler temperatures. Using these models it is now possible to produce the NIR colours across the main sequence from spectral types M to T. However, one significant area in which these Dusty and Settl models have not been thoroughly tested is in PMS VLMS/BDs. We use empirical IR colours of PMS M-dwarfs to show that both of these models show significant discrepancies with observations. We find that the synthetic spectra imply a temperature up to 500K cooler than expected for these objects from the theoretical evolutionary tracks for their estimated ages. We postulate that the problem lies mainly with the spectra; and if so, we conjecture that an incorrect H2O opacity may be to blame, aided by additional dust effects.

Characterizing urban hydrodynamic models in densely settled river-corridors: Lessons from Jakarta

NASA Astrophysics Data System (ADS)

Shaad, K.; Ninsalam, Y.; Padawangi, R.; Burlando, P.

2016-12-01

The nature and pace of urbanization in South and South-east Asia has created unique circumstances for the inter-action between social and ecological systems linked to water resources - with the growing density of population; frequent and extensive modification on the flood plain alongside governance challenges creating large segment of the settled regions exposed to water security issues and flooding risks. The densely-settled river corridor in Jakarta, with nearly 590 km of waterfront exposed to frequent flooding, captures the scale and complexity typical of these systems. Developing models that can help improve our insights into these urban areas remain a challenge. Here, we present our attempts to apply high-resolution aerial and ground based mapping methods, alongside shallow groundwater monitoring and household surveys, to characterize hydrodynamic models of varying complexity, for a 7 km stretch on the Ciliwung River in the center of Jakarta. We explore the uncertainty associated with obtaining "hydraulically representative" ground description and influence of representation of structures in flood propagation over the short-term, while linking it to the diffusive forcings from settlement acting on the floodplain-river interaction over the long-term. Connecting, thus, flooding with water availability and contamination, we speculate on the ability to scale these approaches and technologies beyond the limits of the test site.

Comparison of methods for isolation and enumeration of thermophilic actinomycetes from dust.

PubMed Central

Treuhaft, M W; Arden Jones, M P

1982-01-01

Thermophilic actinomycetes are the primary sensitizing agents in farmer's lung disease. We compared dilution pour-plate and spread-plate methods for their usefulness in enumerating thermophilic actinomycetes in moldy silage dust and evaluated the ability of a nonquantitative gravity settling technique to recover thermophilic actinomycetes from moldy silage. Spread plates and pour plates yielded similar estimates of total thermophiles. Higher counts were observed on spread plates (P less than 0.05) for Thermoactinomyces candidus, Micropolyspora faeni, and Saccharomonospora viridis. M. faeni and S. viridis were less efficient than T. candidus in breaking through the agar of pour plates to form colonies which could be identified. Coefficients of variability were less than 10% for the two methods. The relative proportion of organisms recovered by the settling method correlated well with that recovered on spread plates for M. faeni (r = 0.79), S. viridis (r = 0.88), and Thermomonospora spp. (r = 0.79), but not well for T. candidus (r = 0.28). When sophisticated air-sampling equipment is not available, dilution spread plates of dust washings provide a reproducible method for enumerating a broad range of thermophilic actinomycetes of interest. The gravity settling method is a simple, rapid alternative when isolation is all that is required. PMID:6761363

A Lower Level of Physically Demanding Work Is Associated with Excellent Work Ability in Men and Women with Neck Pain in Different Age Groups.

PubMed

Oliv, Stefan; Noor, Adnan; Gustafsson, Ewa; Hagberg, Mats

2017-12-01

The aim of this study was to investigate which physical and psychosocial work demands were associated with excellent work ability in individuals with neck pain, and to investigate age and sex differences in these associations. The study sample was obtained from the Statistics Sweden cross-sectional Work Environment survey and consisted of workers who reported neck pain after work ( N  = 3,212). The findings showed an association between excellent work ability and self-reported low exposure to lifting, twisted work posture, working with hands in shoulder level or higher, and leaning forward without support and combination of exposures containing these work demands. Low exposure to seated work and high demands showed a reversed association. The associations were present mainly among older workers and were generally stronger for men than for women. This study indicates that a lower level of physically demanding work is an important element to maintain excellent work ability, especially for the older worker with neck pain.

Concentration-driven models revisited: towards a unified framework to model settling tanks in water resource recovery facilities.

PubMed

Torfs, Elena; Martí, M Carmen; Locatelli, Florent; Balemans, Sophie; Bürger, Raimund; Diehl, Stefan; Laurent, Julien; Vanrolleghem, Peter A; François, Pierre; Nopens, Ingmar

2017-02-01

A new perspective on the modelling of settling behaviour in water resource recovery facilities is introduced. The ultimate goal is to describe in a unified way the processes taking place both in primary settling tanks (PSTs) and secondary settling tanks (SSTs) for a more detailed operation and control. First, experimental evidence is provided, pointing out distributed particle properties (such as size, shape, density, porosity, and flocculation state) as an important common source of distributed settling behaviour in different settling unit processes and throughout different settling regimes (discrete, hindered and compression settling). Subsequently, a unified model framework that considers several particle classes is proposed in order to describe distributions in settling behaviour as well as the effect of variations in particle properties on the settling process. The result is a set of partial differential equations (PDEs) that are valid from dilute concentrations, where they correspond to discrete settling, to concentrated suspensions, where they correspond to compression settling. Consequently, these PDEs model both PSTs and SSTs.

A Study in Child Care (Case Study from Volume II-A): "Tacos and Tulips." Day Care Programs Reprint Series.

ERIC Educational Resources Information Center

O'Farrell, Brigid

The Holland Day Care Center in Michigan serves a diverse community of Anglo children of Dutch ancestry and children of former migrant workers of Chicano, Black, Puerto Rican and Cuban origins who have settled in the area. Located in two churches which are about three blocks apart, the program divides children by ability and age into five…

They Should Have Sent a Poet: Deepening Students' Understanding of History through the Use of Poetry

ERIC Educational Resources Information Center

Lopez, Christopher

2014-01-01

Though poetry can be used to examine a number of topics, this author feels that it is especially illuminating when exploring war. On its surface, war is a ludicrous spectacle of human failings. The fact that countries allow disputes to be settled by a demonstration of each nation's ability to kill citizens of the other nation defies logic. In…

Interactions and Survival of Enteric Viruses in Soil Materials

PubMed Central

Sobsey, Mark D.; Dean, Cheryl H.; Knuckles, Maurice E.; Wagner, Ray A.

1980-01-01

There were marked differences in the abilities of eight different soil materials to remove and retain viruses from settled sewage, but for each soil material the behavior of two different viruses, poliovirus type 1 and reovirus type 3, was often similar. Virus adsorption to soil materials was rapid, the majority occurring within 15 min. Clayey materials efficiently adsorbed both viruses from wastewater over a range of pH and total dissolved solids levels. Sands and organic soil materials were comparatively poor adsorbents, but in some cases their ability to adsorb viruses increased at low pH and with the addition of total dissolved solids or divalent cations. Viruses in suspensions of soil material in settled sewage survived for considerable time periods, despite microbial activity. In some cases virus survival was prolonged in suspensions of soil materials compared to soil-free controls. Although sandy and organic soil materials were poor virus adsorbents when suspended in wastewater, they gave ≥95% virus removal from intermittently applied wastewater as unsaturated, 10-cm-deep columns. However, considerable quantities of the retained viruses were washed from the columns by simulated rainfall. Under the same conditions, clayey soil material removed ≥99.9995% of the viruses from applied wastewater, and none were washed from the columns by simulated rainfall. PMID:6250478

Theoretical and experimental investigation on magneto-hydrodynamics of plasma window

DOE PAGES

Wang, S. Z.; Zhu, K.; Huang, S.; ...

2016-01-05

As a new device, we designed plasma window to use plasma discharge to separate atmosphere from vacuum with high difference of pressure. It has many excellent properties, being able to be used as available passage for ion beam with negligible energy loss, also impervious to radiation damage and thermal damage. Normally beam focusing by accelerators is not that easy to achieve within channel of small cross section. 10 mm diameter plasma window's experimental realization could contribute to its further application in accelerator system. In this paper, 10 mm diameter 60 mm long plasma window has first been designed and managedmore » to generate arc discharge with argon gas experimentally. Our result proves that it has the ability to separate at least 28.8 kPa (not the upper limit) from 360 Pa with 50 A direct current and 2.5 kW power supplied. Current increase leads to linear inlet pressure increase obviously, while it has less impact on outlet pressure and voltage, coming to the conclusion that the higher current of plasma discharge, the larger pressure difference it creates. Furthermore, theoretical analysis of 10 mm diameter plasma window in axis symmetrical configuration using argon also has been provided, in which a numerical 2D FLUENT-based magneto-hydrodynamic simulation model is settled. It has a good agreement with experimental result on voltage and mass flow rate when inlet pressure is increased.« less

Bioaggregate of photo-fermentative bacteria for enhancing continuous hydrogen production in a sequencing batch photobioreactor

NASA Astrophysics Data System (ADS)

Xie, Guo-Jun; Liu, Bing-Feng; Wang, Rui-Qing; Ding, Jie; Ren, Hong-Yu; Zhou, Xu; Ren, Nan-Qi

2015-11-01

Hydrogen recovery through solar-driven biomass conversion by photo-fermentative bacteria (PFB) has been regarded as a promising way for sustainable energy production. However, a considerable fraction of organic substrate was consumed for the growth of PFB as biocatalysts, furthermore, these PFB were continuously washed out from the photobioreactor in continuous operation because of their poor flocculation. In this work, PFB bioaggregate induced by L-cysteine was applied in a sequencing batch photobioreactor to enhance continuous hydrogen production and reduce biomass washout. The effects of the hydraulic retention time (HRT), influent concentration and light intensity on hydrogen production of the photobioreactor were investigated. The maximum hydrogen yield (3.35 mol H2/mol acetate) and production rate (1044 ml/l/d) were obtained at the HRT of 96 h, influent concentration of 3.84 g COD/l, and light intensity of 200 W/m2. With excellent settling ability, biomass accumulated in the photobioreactor and reached 2.15 g/l under the optimum conditions. Structural analysis of bioaggregate showed that bacterial cells were covered and tightly linked together by extracellular polymeric substances, and formed a stable structure. Therefore, PFB bioaggregate induced by L-cysteine is an efficient strategy to improve biomass retention capacity of the photobioreactor and enhance hydrogen recovery efficiency from organic wastes.

Sludge Settling Rate Observations and Projections at the Savannah River Site - 13238

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gillam, Jeffrey M.; Shah, Hasmukh B.; Keefer, Mark T.

2013-07-01

Since 2004, sludge batches have included a high percentage of stored sludge generated from the H- modified (HM) process. The slow-settling nature of HM sludge means that the settling is often the major part of the washing tank quiescent period between required pump runs to maintain flammability control. Reasonable settling projections are needed to wash soluble salts from sludge in an efficient manner, to determine how much sludge can be washed in a batch within flammability limits, and to provide composition projections for batch qualification work done in parallel with field preparation. Challenges to providing reasonably accurate settling projections includemore » (1) large variations in settling behavior from tank-to-tank, (2) accounting for changing initial concentrations, sludge masses, and combinations of different sludge types, (3) changing the settling behavior upon dissolving some sludge compounds, and (4) sludge preparation schedules that do not allow for much data collection for a particular sludge before washing begins. Scaling from laboratory settling tests has provided inconsistent results. Several techniques have been employed to improve settling projections and therefore the overall batch preparation efficiency. Before any observations can be made on a particular sludge mixture, projections can only be made based on historical experience with similar sludge types. However, scaling techniques can be applied to historical settling models to account for different sludge masses, concentrations, and even combinations of types of sludge. After sludge washing/settling cycles begin, the direct measurement of the sludge height, once generally limited to a single turbidity meter measurement per settle period, is now augmented by examining the temperature profile in the settling tank, to help determine the settled sludge height over time. Recently, a settling model examined at PNNL [1,2,3] has been applied to observed thermocouple and turbidity meter readings to quickly provide settling correlations to project settled heights for other conditions. These tools improve the accuracy and adaptability of short and mid-range planning for sludge batch preparation. (authors)« less

University Rankings in Action? The Importance of Rankings and an Excellence Competition for University Choice of High-Ability Students

ERIC Educational Resources Information Center

Horstschraer, Julia

2012-01-01

This paper analyzes how high-ability students respond to different indicators of university quality when applying for a university. Are prospective students influenced by quality indicators of a university ranking or by an excellence status awarded within a nationwide competition? And if so, are some quality dimensions, e.g. research reputation,…

Rising CO2 concentrations affect settlement behaviour of larval damselfishes

NASA Astrophysics Data System (ADS)

Devine, B. M.; Munday, P. L.; Jones, G. P.

2012-03-01

Reef fish larvae actively select preferred benthic habitat, relying on olfactory, visual and acoustic cues to discriminate between microhabitats at settlement. Recent studies show exposure to elevated carbon dioxide (CO2) impairs olfactory cue recognition in larval reef fishes. However, whether this alters the behaviour of settling fish or disrupts habitat selection is unknown. Here, the effect of elevated CO2 on larval behaviour and habitat selection at settlement was tested in three species of damselfishes (family Pomacentridae) that differ in their pattern of habitat use: Pomacentrus amboinensis (a habitat generalist), Pomacentrus chrysurus (a rubble specialist) and Pomacentrus moluccensis (a live coral specialist). Settlement-stage larvae were exposed to current-day CO2 levels or CO2 concentrations that could occur by 2100 (700 and 850 ppm) based on IPCC emission scenarios. First, pair-wise choice tests were performed using a two-channel flume chamber to test olfactory discrimination between hard coral, soft coral and coral rubble habitats. The habitat selected by settling fish was then compared among treatments using a multi-choice settlement experiment conducted overnight. Finally, settlement timing between treatments was compared across two lunar cycles for one of the species, P. chrysurus. Exposure to elevated CO2 disrupted the ability of larvae to discriminate between habitat odours in olfactory trials. However, this had no effect on the habitats selected at settlement when all sensory cues were available. The timing of settlement was dramatically altered by CO2 exposure, with control fish exhibiting peak settlement around the new moon, whereas fish exposed to 850 ppm CO2 displaying highest settlement rates around the full moon. These results suggest larvae can rely on other sensory information, such as visual cues, to compensate for impaired olfactory ability when selecting settlement habitat at small spatial scales. However, rising CO2 could cause larvae to settle at unfavourable times, with potential consequences for larval survival and population replenishment.

Work ability in midlife as a predictor of mortality and disability in later life: a 28-year prospective follow-up study

PubMed Central

von Bonsdorff, Mikaela B.; Seitsamo, Jorma; Ilmarinen, Juhani; Nygård, Clas-Håkan; von Bonsdorff, Monika E.; Rantanen, Taina

2011-01-01

Background Poor work ability correlates with increased morbidity and early retirement from the workforce, but the association in old age is not known. We investigated work ability in midlife among white-collar and blue-collar employees as a predictor of mortality and disability 28 years later. Methods A total of 5971 occupationally active people aged 44–58 years participated in the Finnish Longitudinal Study of Municipal Employees (FLAME) in 1981. Perceived work ability relative to lifetime best was categorized as excellent, moderate or poor. In 2009, the ability to perform activities of daily living was assessed among 2879 respondents (71.0% of the survivors). Mortality data were available up to July 2009. Results At the 28-year follow-up, 1918 of the 5971 participants had died and 1403 had some form of disability. Rates of death per 1000 person-years among white-collar men were 7.7 for those with excellent work ability, 14.7 for those with moderate work ability and 23.5 for those with poor work ability. Among blue-collar men, the corresponding rates were 15.5, 20.2 and 25.3. In women, rates ranged between 6.3 and 10.6 per 1000 person-years. The age-adjusted hazard ratios (HRs) for mortality were two to three times higher among blue-collar male employees with lower work ability than among white-collar male employees with excellent work ability in midlife (i.e., the reference group). The odds of death or disability at follow-up compared with white-collar workers with excellent work ability were highest among blue-collar employees with poor work ability in midlife (odds ratio [OR] 4.56, 95% confidence interval [CI] 2.82–7.37 for men; OR 3.37, 95% CI 2.28–4.98 for women). Among the survivors, similar but slightly lower risks of disability 28 years later were found. Interpretation Perceived poor work ability in midlife was associated with accelerated deterioration in health and functioning and remains evident after 28 years of follow-up. PMID:21282315

On constitutive functions for hindered settling velocity in 1-D settler models: Selection of appropriate model structure.

PubMed

Torfs, Elena; Balemans, Sophie; Locatelli, Florent; Diehl, Stefan; Bürger, Raimund; Laurent, Julien; François, Pierre; Nopens, Ingmar

2017-03-01

Advanced 1-D models for Secondary Settling Tanks (SSTs) explicitly account for several phenomena that influence the settling process (such as hindered settling and compression settling). For each of these phenomena a valid mathematical expression needs to be selected and its parameters calibrated to obtain a model that can be used for operation and control. This is, however, a challenging task as these phenomena may occur simultaneously. Therefore, the presented work evaluates several available expressions for hindered settling based on long-term batch settling data. Specific attention is paid to the behaviour of these hindered settling functions in the compression region in order to evaluate how the modelling of sludge compression is influenced by the choice of a certain hindered settling function. The analysis shows that the exponential hindered settling forms, which are most commonly used in traditional SST models, not only account for hindered settling but partly lump other phenomena (compression) as well. This makes them unsuitable for advanced 1-D models that explicitly include each phenomenon in a modular way. A power-law function is shown to be more appropriate to describe the hindered settling velocity in advanced 1-D SST models. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Model of Pantun Learning to Develop Elementary Student’s Entrepreneurship Awareness

NASA Astrophysics Data System (ADS)

Asteria, P. V.; Yulianto, B.

2018-01-01

The principle of entrepreneurship should be instilled from an early age. Pantun is one of Indonesian local culture taught for the elementary school student. Therefore, this study aims to describe (1) the ability to understand the content from pantun based entrepreneurship, (2) the ability to determine the messages from pantun based entrepreneurship, and (3) the ability to apply the messages from pantun based entrepreneurship into their real life. The research type is descriptive quantitative and conducted on the subject of 35 students from SDN Margomulyo I Ngawi. The data is the student’s skill in reading comprehension from the pantun based entrepreneurship with the writing test items instrument. The results showed that the student’s ability to determine the content from pantun based entrepreneurship shows achievement by an average of 9.3 (include an excellent category) and the ability of students to determine the entrepreneurship messages by an average of 7.8 (good). Meanwhile, the average student’s ability to apply the entrepreneurship messages in pantun into their real life by an average of 8.7 (excellent). Overall, the student’s skill in reading comprehension from the pantun based entrepreneurship as a whole reached an average of 86.4 (excellent category).

Depletion of Cryptosporidium parvum Oocysts from Contaminated Sewage by Using Freshwater Benthic Pearl Clams (Hyriopsis schlegeli)

PubMed Central

Yagita, Kenji; Izumiyama, Shinji; Endo, Takuro; Itoh, Yasoo

2012-01-01

The freshwater benthic pearl clam, Hyriopsis schlegeli, was experimentally exposed to Cryptosporidium parvum oocysts, and it was verified that the oocysts were eliminated predominantly via the fecal route, retaining their ability to infect cultured cells (HCT-8). The total fecal oocyst elimination rate was more than 90% within 5 days after exposure to the oocysts. H. schlegeli was able to survive in the final settling pond of a sewage plant for long periods, as confirmed by its pearl production. In the light of these findings, the clam was placed in the final settling pond in a trial to test its long-term efficacy in depleting oocysts contaminating the pond water. The number of clams placed was set to ensure a theoretical oocyst removal rate of around 50%, and the turbidity and the density of feed microbes in the overflow trough water of the pond were about 35% and 40 to 60% lower, respectively, than in the control water throughout the year. It was found that the clam feces containing oocysts were sufficiently heavy for them to settle to the bottom of the pond, despite the upward water flow. From these results, we concluded that efficient depletion of oocysts in the sewage water of small or midscale sewage treatment plants can be achieved by appropriate placement of H. schlegeli clams. PMID:22904053

Grain dust originating from organic and conventional farming as a potential source of biological agents causing respiratory diseases in farmers.

PubMed

Zukiewicz-Sobczak, Wioletta A; Cholewa, Grażyna; Krasowska, Ewelina; Chmielewska-Badora, Jolanta; Zwoliński, Jacek; Sobczak, Paweł

2013-12-01

Agricultural producers are exposed to a number of different health risks associated with their work environment. The objective of the study was to assess the degree of colonization by fungi in terms of quantity and in terms of variety of species the samples taken from the settled dust from combine threshing of rye cultivation from organic and conventional farms in the Province of Lublin. This paper is a preliminary quantitative assessment of the species of fungi colonizing the samples of settled dust collected during combine threshing from organic and conventional farms in the Province of Lublin. One of the stages of the project was the classification of biosafety BSL (biosafety level) of selected isolates and API ZYM tests to evaluate the potential ability of isolates to cause adverse health effects. To determine the concentration and composition of fungi in collected samples plate dilution method was used with two media: Malt Agar and Potato Dextrose Agar. MOST COMMONLY ISOLATED FUNGI IN SETTLED DUST SAMPLES COLLECTED DURING COMBINE THRESHING FROM ORGANIC FARMS, ON PDA MEDIUM WERE: Alternaria alternata and Aureobasidium pullulans. Cultures on MA medium were dominated by Alternaria alternata, Mycelia sterilia and Fusarium poae. In samples of dust from conventional crops, the predominant species was Alternaria alternata on PDA medium and on MA medium. The obtained results show a potential risk of people involved in agricultural work.

System and technique for ultrasonic characterization of settling suspensions

DOEpatents

Greenwood, Margaret S [Richland, WA; Panetta, Paul D [Richland, WA; Bamberger, Judith A [Richland, WA; Pappas, Richard A [Richland, WA

2006-11-28

A system for determining properties of settling suspensions includes a settling container, a mixer, and devices for ultrasonic interrogation transverse to the settling direction. A computer system controls operation of the mixer and the interrogation devices and records the response to the interrogating as a function of settling time, which is then used to determine suspension properties. Attenuation versus settling time for dilute suspensions, such as dilute wood pulp suspension, exhibits a peak at different settling times for suspensions having different properties, and the location of this peak is used as one mechanism for characterizing suspensions. Alternatively or in addition, a plurality of ultrasound receivers are arranged at different angles to a common transmitter to receive scattering responses at a variety of angles during particle settling. Angular differences in scattering as a function of settling time are also used to characterize the suspension.

Training of Ability for Engineering Design through Long Term Internship Program

NASA Astrophysics Data System (ADS)

Konishi, Masami; Gofuku, Akio; Tomita, Eiji

The education program for engineering design capabilities through long term internship of Okayama University had started in 2006. The program supported by the MEXT is aimed to educate students in the Graduate School of Natural Science and Technology of Okayama University. The internship satellite laboratory of the University is settled in the near place of collaborative companies in which students are engaged with the project themes extracted from problems in the factory of collaborative companies. Through the program, promotion of abilities for setup and solving a problem considering cost and due date together with performance of the solution. Students are also expected to gain knowledge on patent and ethics required for skillful engineers.

Monitoring of activated sludge settling ability through image analysis: validation on full-scale wastewater treatment plants.

PubMed

Mesquita, D P; Dias, O; Amaral, A L; Ferreira, E C

2009-04-01

In recent years, a great deal of attention has been focused on the research of activated sludge processes, where the solid-liquid separation phase is frequently considered of critical importance, due to the different problems that severely affect the compaction and the settling of the sludge. Bearing that in mind, in this work, image analysis routines were developed in Matlab environment, allowing the identification and characterization of microbial aggregates and protruding filaments in eight different wastewater treatment plants, for a combined period of 2 years. The monitoring of the activated sludge contents allowed for the detection of bulking events proving that the developed image analysis methodology is adequate for a continuous examination of the morphological changes in microbial aggregates and subsequent estimation of the sludge volume index. In fact, the obtained results proved that the developed image analysis methodology is a feasible method for the continuous monitoring of activated sludge systems and identification of disturbances.

Effect of growth phase on harvesting characteristics, autoflocculation and lipid content of Ettlia texensis for microalgal biodiesel production.

PubMed

Salim, S; Shi, Z; Vermuë, M H; Wijffels, R H

2013-06-01

The effect of growth phase on the recovery of the autoflocculating microalgae Ettlia texensis was studied. In the stationary phase, 90% recovery was achieved after 3h settling. Scanning electron microscopic pictures revealed that extracellular polymeric substances (EPS) on the cell surface were involved in autoflocculation. During the stationary phase an increase of the protein fraction in the EPS was observed while the total fatty acids content increased. The autoflocculating properties of E. texensis combined with favourite fatty acid content and composition make this microalgae an excellent candidate for biodiesel production if harvested at the end of the stationary phase. Copyright © 2013 Elsevier Ltd. All rights reserved.

Existence of both culturable and viable but non culturable (VNC) E. coli populations with distinct settling velocities in karst aquifer

NASA Astrophysics Data System (ADS)

Petit, F.; Ratajczak, M.; Massei, N.; Lafite, R.; Clermont, O.; Denamur, E.; Berthe, T.

2012-12-01

The karst aquifers are particularly vulnerable to contamination by faecal pathogens mainly during rainfall event. In groundwater, the fate of E. coli is dependent on their ability to overcome environmental stresses and on their association with particles. Moreover, some strains can survive leading to the emergence of a sub-population of E. coli which failed to grow on laboratory media, while they were still alive thus designated as viable but non culturable (VNC). The aim of this study was to investigate (i) the structure of culturable E. coli population based on the survival ability, the distribution in four main phylo-groups (A, B1, B2, D) and the phenotypic characteristics; and, (ii) the fate of culturable and VNC E. coli, according to their settling velocities. This work was carried out on a karstic workshop-site for which the microbial quality of water was impaired related to livestock density and septic tanks overflows. Particles characterisation was performed by estimation of their settling velocities combined with electronic microscopy observation, and solid phase cytometry (ChemScan®RDI) was carried out to quantify the viable E. coli, and thus VNC E. coli. In the karst, different populations of E. coli were coexisting related to their survival, their culturability, and their association to particles. At the sinkhole, during a rainfall event with pasture, E. coli rapidly losing their culturability after 2 days have been more frequently isolated. These isolates are mainly multiresistant to antibiotics and harbor several virulence factors. In the same time, a population of VNC E. coli (79%), associated to the "non settleable particles" (settling velocities ranging between 10-5 to 10-2 mm.s-1), mainly corresponding to colloids and organic or organo-mineral microflocs was injected in the karst system, probably corresponding to the runoff of attached-bacteria originating from cowpats. Once in the karst, the relative contribution of culturable and VNC E. coli associated to "non settleable" particles, decreased from the sinkhole to the spring. In contrast in dry period while the turbidity and the contamination by culturable E. coli is low, the three populations of viable, culturable and VNC E. coli are introduced in the karst. Within the population of culturable E. coli, persistent strains mainly belonging to B1 phylogroup and growing at 7°C were introduced in karst aquifer. At the spring, whatever the class of particles up to 96% of viable cells were in VNC state suggesting that a physiological change occurred within aquifer, independently of the association of E. coli with particles. At the well, the pumping of the water induced an input of resident VNC E. coli consecutively to a resuspension of particles previously settled within the karstic network, during a past turbid event.

The sequencing batch reactor as an excellent configuration to treat wastewater from the petrochemical industry.

PubMed

Caluwé, Michel; Daens, Dominique; Blust, Ronny; Geuens, Luc; Dries, Jan

2017-02-01

In the present study, the influence of a changing feeding pattern from continuous to pulse feeding on the characteristics of activated sludge was investigated with a wastewater from the petrochemical industry from the harbour of Antwerp. Continuous seed sludge, adapted to the industrial wastewater, was used to start up three laboratory-scale sequencing batch reactors. After an adaptation period from the shift to pulse feeding, the effect of an increasing organic loading rate (OLR) and volume exchange ratio (VER) were investigated one after another. Remarkable changes of the specific oxygen uptake rate (sOUR), microscopic structure, sludge volume index (SVI), SVI 30 /SVI 5 ratio, and settling rate were observed during adaptation. sOUR increased two to five times and treatment time decreased 43.9% in 15 days. Stabilization of the SVI occurred after a period of 20 days and improved significantly from 300 mL·g -1 to 80 mL·g -1 . Triplication of the OLR and VER had no negative influence on sludge settling and effluent quality. Adaptation time of the microorganisms to a new feeding pattern, OLR and VER was relatively short and sludge characteristics related to aerobic granular sludge were obtained. This study indicates significant potential of the batch activated sludge system for the treatment of this industrial petrochemical wastewater.

Settling of virgin olive oil from horizontal screw solid bowl in static conditions.

PubMed

Gila, Abraham M; Bejaoui, Mohamed A; Beltrán, Gabriel; Jiménez, Antonio

2017-08-01

This work was aimed to study the clarification efficiency of natural decantation in settling tank on virgin olive oil obtained from a two-ways continuous process. For this purpose, the impurities content of the virgin olive oil were monitored during settling process in settling tank at two different depths. Efficiency of purging system was determined for two days. The experiments were performed at industrial scale during three crop years. During the first minutes of settling was observed an ascent of the smaller organic particles of the oil. Then, most of the virgin olive oil impurities were settled at 300 min, independently of the initial content of virgin olive oil. Finally, oil decantation showed slower rate. Higher clarification values were obtained for those decanter oils with higher impurities content, achieving clarification percentages between of 62.69 and 95.91% at 48 h of settling. The highest settling efficiency was observed for those decanter oils with initial higher impurities content. The purging system used in the settling tanks was not able to remove the most of settled impurities since a considerable amount of the impurities remained in the tank after 48 h, between 13.6 and 71.41% for the studied oils. In the tank purges was observed important oil losses. Therefore, decantation was not an efficient system for oil clarification since its settling capacity varied depending on the initial impurities content and due to the settled impurities can not be removed fully by purging system.

Optimization of the static occlusion by "occlusal surface settling" in the Cerec 3D software.

PubMed

Späth, C; Kordass, B

2006-04-01

The adjustment of the static occlusion can be automated in computer-based systems. The Cerec 3D software makes it possible to take preformed occlusal surfaces from a database and adapt them to the antagonist. In this adaptation (settling), the CAD occlusal surface "settles" as whole or each cusp individually into the occlusal surface of the antagonist until stable occlusion is reached. Two occlusal surface shapes were compared: Vita Physiodens and Lee Culp. An index was formed from the number, quality, and position of the occlusal contacts for 35 model cases (25 molars, 10 premolars). With regard to the settling of the total occlusal surfaces, there were no differences between the two occlusal surface shapes. In "cusp settling" of the molars, Vita Physiodens performed significantly better. In the comparison of the 1st with the 3rd settling process, significant improvements occurred the 3rd time in many cases when settling individual cusps, but in clearly fewer cases in the settling process of the total occlusal surface. The Lee Culp tooth occlusion improved especially after the 3rd settling process of individual cusps. It is therefore expedient to combine both settling versions with one another.

Characterization of the settling process for wastewater from a combined sewer system.

PubMed

Piro, P; Carbone, M; Penna, N; Marsalek, J

2011-12-15

Among the methods used for determining the parameters necessary for design of wastewater settling tanks, settling column tests are used most commonly, because of their simplicity and low costs. These tests partly mimic the actual settling processes and allow the evaluation of total suspended solids (TSS) removal by settling. Wastewater samples collected from the Liguori Channel (LC) catchment in Cosenza (Italy) were subject to settling column tests, which yielded iso-removal curves for both dry and wet-weather flow conditions. Such curves were approximated well by the newly proposed power law function containing two empirical parameters, a and b, the first of which is the particle settling velocity and the second one is a flocculation factor accounting for deviations from discrete particle settling. This power law function was tested for both the LC catchment and literature data and yielded a very good fit, with correlation coefficient values (R(2)) ranging from 0.93 to 0.99. Finally, variations in the settling tank TSS removal efficiencies with parameters a and b were also analyzed and provided insight for settling tank design. Copyright © 2011 Elsevier Ltd. All rights reserved.

Training anesthesiology residents in providing anesthesia for awake craniotomy: learning curves and estimate of needed case load.

PubMed

Bilotta, Federico; Titi, Luca; Lanni, Fabiana; Stazi, Elisabetta; Rosa, Giovanni

2013-08-01

To measure the learning curves of residents in anesthesiology in providing anesthesia for awake craniotomy, and to estimate the case load needed to achieve a "good-excellent" level of competence. Prospective study. Operating room of a university hospital. 7 volunteer residents in anesthesiology. Residents underwent a dedicated training program of clinical characteristics of anesthesia for awake craniotomy. The program was divided into three tasks: local anesthesia, sedation-analgesia, and intraoperative hemodynamic management. The learning curve for each resident for each task was recorded over 10 procedures. Quantitative assessment of the individual's ability was based on the resident's self-assessment score and the attending anesthesiologist's judgment, and rated by modified 12 mm Likert scale, reported ability score visual analog scale (VAS). This ability VAS score ranged from 1 to 12 (ie, very poor, mild, moderate, sufficient, good, excellent). The number of requests for advice also was recorded (ie, resident requests for practical help and theoretical notions to accomplish the procedures). Each task had a specific learning rate; the number of procedures necessary to achieve "good-excellent" ability with confidence, as determined by the recorded results, were 10 procedures for local anesthesia, 15 to 25 procedures for sedation-analgesia, and 20 to 30 procedures for intraoperative hemodynamic management. Awake craniotomy is an approach used increasingly in neuroanesthesia. A dedicated training program based on learning specific tasks and building confidence with essential features provides "good-excellent" ability. © 2013 Elsevier Inc. All rights reserved.

Contextual approach using VBA learning media to improve students’ mathematical displacement and disposition ability

NASA Astrophysics Data System (ADS)

Chotimah, Siti; Bernard, M.; Wulandari, S. M.

2018-01-01

The main problems of the research were the lack of reasoning ability and mathematical disposition of students to the learning of mathematics in high school students in Cimahi - West Java. The lack of mathematical reasoning ability in students was caused by the process of learning. The teachers did not train the students to do the problems of reasoning ability. The students still depended on each other. Sometimes, one of patience teacher was still guiding his students. In addition, the basic ability aspects of students also affected the ability the mathematics skill. Furthermore, the learning process with contextual approach aided by VBA Learning Media (Visual Basic Application for Excel) gave the positive influence to the students’ mathematical disposition. The students are directly involved in learning process. The population of the study was all of the high school students in Cimahi. The samples were the students of SMA Negeri 4 Cimahi class XIA and XIB. There were both of tested and non-tested instruments. The test instrument was a description test of mathematical reasoning ability. The non-test instruments were questionnaire-scale attitudes about students’ mathematical dispositions. This instrument was used to obtain data about students’ mathematical reasoning and disposition of mathematics learning with contextual approach supported by VBA (Visual Basic Application for Excel) and by conventional learning. The data processed in this study was from the post-test score. These scores appeared from both of the experimental class group and the control class group. Then, performing data was processed by using SPSS 22 and Microsoft Excel. The data was analyzed using t-test statistic. The final result of this study concluded the achievement and improvement of reasoning ability and mathematical disposition of students whose learning with contextual approach supported by learning media of VBA (Visual Basic Application for Excel) was better than students who got conventional learning.

Theoretical and experimental investigation on magneto-hydrodynamics of plasma window

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, S. Z.; Zhu, K., E-mail: zhukun@pku.edu.cn; Huang, S.

2016-01-15

As a new device, plasma window has been designed to use plasma discharge to separate atmosphere from vacuum with high difference of pressure. It has many excellent properties, being able to be used as available passage for ion beam with negligible energy loss, also impervious to radiation damage and thermal damage. Normally beam focusing by accelerators is not that easy to achieve within channel of small cross section. 10 mm diameter plasma window's experimental realization could contribute to its further application in accelerator system. In this paper, 10 mm diameter 60 mm long plasma window has first been designed and managed to generatemore » arc discharge with argon gas experimentally. The result proves that it has the ability to separate at least 28.8 kPa (not the upper limit) from 360 Pa with 50 A direct current and 2.5 kW power supplied. Current increase leads to linear inlet pressure increase obviously, while it has less impact on outlet pressure and voltage, coming to the conclusion that the higher current of plasma discharge, the larger pressure difference it creates. Theoretical analysis of 10 mm diameter plasma window in axis symmetrical configuration using argon also has been provided, in which a numerical 2D FLUENT-based magneto-hydrodynamic simulation model is settled. It has a good agreement with experimental result on voltage and mass flow rate when inlet pressure is increased.« less

KSC-06pd0971

NASA Image and Video Library

2006-06-01

KENNEDY SPACE CENTER, FLA. - Inside the Space Station Processing Facility at NASA's Kennedy Space Center, an overhead crane settles the Columbus module onto a work stand. Columbus is the European Space Agency's research laboratory for the International Space Station. The module will be prepared for delivery to the space station on a future space shuttle mission. Columbus will expand the research facilities of the station and provide researchers with the ability to conduct numerous experiments in the area of life, physical and materials sciences. Photo credit: NASA/Jim Grossmann

The foundations of the human cultural niche

PubMed Central

Derex, Maxime; Boyd, Robert

2015-01-01

Technological innovations have allowed humans to settle in habitats for which they are poorly suited biologically. However, our understanding of how humans produce complex technologies is limited. We used a computer-based experiment, involving humans and learning bots, to investigate how reasoning abilities, social learning mechanisms and population structure affect the production of virtual artefacts. We found that humans' reasoning abilities play an important role in the production of innovations, but that groups of individuals are able to produce artefacts that are more complex than any isolated individual can produce during the same amount of time. We show that this group-level ability to produce complex innovations is maximized when social information is easy to acquire and when individuals are organized into large and partially connected populations. These results suggest that the transition to behavioural modernity could have been triggered by a change in ancestral between-group interaction patterns. PMID:26400015

Sparse aperture differential piston measurements using the pyramid wave-front sensor

NASA Astrophysics Data System (ADS)

Arcidiacono, Carmelo; Chen, Xinyang; Yan, Zhaojun; Zheng, Lixin; Agapito, Guido; Wang, Chaoyan; Zhu, Nenghong; Zhu, Liyun; Cai, Jianqing; Tang, Zhenghong

2016-07-01

In this paper we report on the laboratory experiment we settled in the Shanghai Astronomical Observatory (SHAO) to investigate the pyramid wave-front sensor (WFS) ability to measure the differential piston on a sparse aperture. The ultimate goal is to verify the ability of the pyramid WFS work in close loop to perform the phasing of the primary mirrors of a sparse Fizeau imaging telescope. In the experiment we installed on the optical bench we performed various test checking the ability to flat the wave-front using a deformable mirror and to measure the signal of the differential piston on a two pupils setup. These steps represent the background from which we start to perform full close loop operation on multiple apertures. These steps were also useful to characterize the achromatic double pyramids (double prisms) manufactured in the SHAO optical workshop.

Application of fuzzy logic to the control of wind tunnel settling chamber temperature

NASA Technical Reports Server (NTRS)

Gwaltney, David A.; Humphreys, Gregory L.

1994-01-01

The application of Fuzzy Logic Controllers (FLC's) to the control of nonlinear processes, typically controlled by a human operator, is a topic of much study. Recent application of a microprocessor-based FLC to the control of temperature processes in several wind tunnels has proven to be very successful. The control of temperature processes in the wind tunnels requires the ability to monitor temperature feedback from several points and to accommodate varying operating conditions in the wind tunnels. The FLC has an intuitive and easily configurable structure which incorporates the flexibility required to have such an ability. The design and implementation of the FLC is presented along with process data from the wind tunnels under automatic control.

Effects of Phytoplankton Growth Phase on Delayed Settling Behavior of Marine Snow Aggregates at Sharp Density Transitions

NASA Astrophysics Data System (ADS)

Proctor, K. W.; Montgomery, Q. W.; Prairie, J. C.

2016-02-01

Marine snow aggregates play a fundamental role in the marine carbon cycle. Since marine snow aggregates are larger and thus sink faster than individual phytoplankton, aggregates often dominate carbon flux. Previous studies have shown that marine snow aggregates will significantly decrease their settling velocity when passing through sharp density transitions within the ocean, a phenomenon defined as delayed settling. Given the importance of aggregate settling to carbon export, these small-scale changes in aggregate settling dynamics may have significant impacts on the efficiency of the biological pump. However, there is still a lack of knowledge about how different physical properties of aggregates can affect this delayed settling. In this study, we investigated the effect of phytoplankton growth phase on delayed settling behavior. Using phytoplankton cultures stopped at four different growth phases, we formed marine snow aggregates in the laboratory in rotating cylindrical tanks. We then observed individual aggregates as they settled through a stratified tank. We will present data which illustrates that aggregates experience greatly reduced settling rates when passing through sharp density gradients and that the growth phase of the phytoplankton used to form these aggregates has a significant effect on this delayed settling behavior. A thorough understanding of the impact of phytoplankton growth phase on the delayed settling behavior of marine snow will offer insight into the way phytoplankton growth phase may influence the efficiency of the biological pump, carbon flux, and the carbon cycle as a whole.

Reef Sound as an Orientation Cue for Shoreward Migration by Pueruli of the Rock Lobster, Jasus edwardsii

PubMed Central

Green, Bridget S.; Gardner, Caleb; Hesse, Jan; Stanley, Jenni A.

2016-01-01

The post-larval or puerulus stage of spiny, or rock, lobsters (Palinuridae) swim many kilometres from open oceans into coastal waters where they subsequently settle. The orientation cues used by the puerulus for this migration are unclear, but are presumed to be critical to finding a place to settle. Understanding this process may help explain the biological processes of dispersal and settlement, and be useful for developing realistic dispersal models. In this study, we examined the use of reef sound as an orientation cue by the puerulus stage of the southern rock lobster, Jasus edwardsii. Experiments were conducted using in situ binary choice chambers together with replayed recording of underwater reef sound. The experiment was conducted in a sandy lagoon under varying wind conditions. A significant proportion of puerulus (69%) swam towards the reef sound in calm wind conditions. However, in windy conditions (>25 m s-1) the orientation behaviour appeared to be less consistent with the inclusion of these results, reducing the overall proportion of pueruli that swam towards the reef sound (59.3%). These results resolve previous speculation that underwater reef sound is used as an orientation cue in the shoreward migration of the puerulus of spiny lobsters, and suggest that sea surface winds may moderate the ability of migrating pueruli to use this cue to locate coastal reef habitat to settle. Underwater sound may increase the chance of successful settlement and survival of this valuable species. PMID:27310676

Reef Sound as an Orientation Cue for Shoreward Migration by Pueruli of the Rock Lobster, Jasus edwardsii.

PubMed

Hinojosa, Ivan A; Green, Bridget S; Gardner, Caleb; Hesse, Jan; Stanley, Jenni A; Jeffs, Andrew G

2016-01-01

The post-larval or puerulus stage of spiny, or rock, lobsters (Palinuridae) swim many kilometres from open oceans into coastal waters where they subsequently settle. The orientation cues used by the puerulus for this migration are unclear, but are presumed to be critical to finding a place to settle. Understanding this process may help explain the biological processes of dispersal and settlement, and be useful for developing realistic dispersal models. In this study, we examined the use of reef sound as an orientation cue by the puerulus stage of the southern rock lobster, Jasus edwardsii. Experiments were conducted using in situ binary choice chambers together with replayed recording of underwater reef sound. The experiment was conducted in a sandy lagoon under varying wind conditions. A significant proportion of puerulus (69%) swam towards the reef sound in calm wind conditions. However, in windy conditions (>25 m s-1) the orientation behaviour appeared to be less consistent with the inclusion of these results, reducing the overall proportion of pueruli that swam towards the reef sound (59.3%). These results resolve previous speculation that underwater reef sound is used as an orientation cue in the shoreward migration of the puerulus of spiny lobsters, and suggest that sea surface winds may moderate the ability of migrating pueruli to use this cue to locate coastal reef habitat to settle. Underwater sound may increase the chance of successful settlement and survival of this valuable species.

Microthrix parvicella abundance associates with activated sludge settling velocity and rheology - Quantifying and modelling filamentous bulking.

PubMed

Wágner, Dorottya S; Ramin, Elham; Szabo, Peter; Dechesne, Arnaud; Plósz, Benedek Gy

2015-07-01

The objective of this work is to identify relevant settling velocity and rheology model parameters and to assess the underlying filamentous microbial community characteristics that can influence the solids mixing and transport in secondary settling tanks. Parameter values for hindered, transient and compression settling velocity functions were estimated by carrying out biweekly batch settling tests using a novel column setup through a four-month long measurement campaign. To estimate viscosity model parameters, rheological experiments were carried out on the same sludge sample using a rotational viscometer. Quantitative fluorescence in-situ hybridisation (qFISH) analysis, targeting Microthrix parvicella and phylum Chloroflexi, was used. This study finds that M. parvicella - predominantly residing inside the microbial flocs in our samples - can significantly influence secondary settling through altering the hindered settling velocity and yield stress parameter. Strikingly, this is not the case for Chloroflexi, occurring in more than double the abundance of M. parvicella, and forming filaments primarily protruding from the flocs. The transient and compression settling parameters show a comparably high variability, and no significant association with filamentous abundance. A two-dimensional, axi-symmetrical computational fluid dynamics (CFD) model was used to assess calibration scenarios to model filamentous bulking. Our results suggest that model predictions can significantly benefit from explicitly accounting for filamentous bulking by calibrating the hindered settling velocity function. Furthermore, accounting for the transient and compression settling velocity in the computational domain is crucial to improve model accuracy when modelling filamentous bulking. However, the case-specific calibration of transient and compression settling parameters as well as yield stress is not necessary, and an average parameter set - obtained under bulking and good settling conditions - can be used. Copyright © 2015 Elsevier Ltd. All rights reserved.

Estimating the settling velocity of bioclastic sediment using common grain-size analysis techniques

USGS Publications Warehouse

Cuttler, Michael V. W.; Lowe, Ryan J.; Falter, James L.; Buscombe, Daniel D.

2017-01-01

Most techniques for estimating settling velocities of natural particles have been developed for siliciclastic sediments. Therefore, to understand how these techniques apply to bioclastic environments, measured settling velocities of bioclastic sedimentary deposits sampled from a nearshore fringing reef in Western Australia were compared with settling velocities calculated using results from several common grain-size analysis techniques (sieve, laser diffraction and image analysis) and established models. The effects of sediment density and shape were also examined using a range of density values and three different models of settling velocity. Sediment density was found to have a significant effect on calculated settling velocity, causing a range in normalized root-mean-square error of up to 28%, depending upon settling velocity model and grain-size method. Accounting for particle shape reduced errors in predicted settling velocity by 3% to 6% and removed any velocity-dependent bias, which is particularly important for the fastest settling fractions. When shape was accounted for and measured density was used, normalized root-mean-square errors were 4%, 10% and 18% for laser diffraction, sieve and image analysis, respectively. The results of this study show that established models of settling velocity that account for particle shape can be used to estimate settling velocity of irregularly shaped, sand-sized bioclastic sediments from sieve, laser diffraction, or image analysis-derived measures of grain size with a limited amount of error. Collectively, these findings will allow for grain-size data measured with different methods to be accurately converted to settling velocity for comparison. This will facilitate greater understanding of the hydraulic properties of bioclastic sediment which can help to increase our general knowledge of sediment dynamics in these environments.

Natural Populations of Shipworm Larvae Are Attracted to Wood by Waterborne Chemical Cues

PubMed Central

Toth, Gunilla B.; Larsson, Ann I.; Jonsson, Per R.; Appelqvist, Christin

2015-01-01

The life cycle of many sessile marine invertebrates includes a dispersive planktonic larval stage whose ability to find a suitable habitat in which to settle and transform into benthic adults is crucial to maximize fitness. To facilitate this process, invertebrate larvae commonly respond to habitat-related chemical cues to guide the search for an appropriate environment. Furthermore, small-scale hydrodynamic conditions affect dispersal of chemical cues, as well as swimming behavior of invertebrate larvae and encounter with potential habitats. Shipworms within the family Teredinidae are dependent on terrestrially derived wood in order to complete their life cycle, but very little is known about the cues and processes that promote settlement. We investigated the potential for remote detection of settling substrate via waterborne chemical cues in teredinid larvae through a combination of empirical field and laboratory flume experiments. Natural populations of teredinid larvae were significantly more abundant close to wooden structures enclosed in plankton net compared to empty control nets, clearly showing that shipworm larvae can sense and respond to chemical cues associated with suitable settling substrate in the field. However, the flume experiments, using ecologically relevant flow velocities, showed that the boundary layer around experimental wooden panels was thin and that the mean flow velocity exceeded larval swimming velocity approximately 5 mm (≈ 25 larval body lengths) from the panel surface. Therefore, we conclude that the scope for remote detection of waterborne cues is limited and that the likely explanation for the higher abundance of shipworm larvae associated with the wooden panels in the field is a response to a cue during or after attachment on, or very near, the substrate. Waterborne cues probably guide the larva in its decision to remain attached and settle, or to detach and continue swimming and drifting until the next encounter with a solid substrate. PMID:25970270

Temporal variation of floc size and settling velocity in the Dollard estuary

NASA Astrophysics Data System (ADS)

Van der Lee, Willem T. B.

2000-09-01

Temporal changes in floc size and settling velocity were measured in the Dollard estuary with an under water video camera. The results show that the flocs in the Dollard are very heterogeneous and that larger flocs have much lower effective densities than smaller flocs. Due to this density decrease, floc settling velocities show only a minor increase with increasing floc size. Floc sizes and settling velocities correlate with the suspended sediment concentration (SSC) on a tidal time scale, but not on a seasonal time scale. On a seasonal time scale floc sizes depend on the binding properties of the sediment, while floc settling velocities show hardly any variation, as an increase in floc size is mainly counterbalanced by a decrease in floc density. Tidal variations in settling velocity occur but cannot be modeled solely as a function of SSC, as the relation between floc size/settling velocity and SSC constantly changes in time and space. Settling velocity variations throughout the tide can however be expressed as a function of tidal phase.

16 CFR 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2012 CFR

2012-01-01

... density. 1209.4 Section 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

16 CFR 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2014 CFR

2014-01-01

... density. 1209.4 Section 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

16 CFR 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2011 CFR

2011-01-01

... density. 1209.4 Section 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

16 CFR 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2010 CFR

2010-01-01

... density. 1209.4 Section 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

Analysis of Fluvial Bed Sediments Along the Apalachicola River, Florida through Field Reconnaissance Studies

NASA Astrophysics Data System (ADS)

Passeri, D.; Hagen, S. C.; Daranpob, A.; Smar, D. E.

2011-12-01

River competence is an important parameter in understanding sediment transport in fluvial systems. Competence is defined as the measure of a stream's ability to transport a certain maximum grain size of sediment. Studies have shown that bed sediment particle size in rivers and streams tends to vary spatially along the direction of stream flow. Over a river section several reaches long, variability of sediment particle sizes can be seen, often becoming finer downstream. This phenomenon is attributed to mechanisms such as local control of stream gradient, coarse tributary sediment supply or particle breakdown. Average particle size may also be smaller in tributary sections of rivers due to river morphology. The relationship between river mean velocity and particle size that can be transported has also been explored. The Hjulstrom curve classifies this relationship by relating particle size to velocity, dividing the regions of sedimentation, transportation, and erosion. The curve can also be used to find values such as the critical erosion velocity (the velocity required to transport particles of various sizes in suspension) and settling velocity (the velocity at which particles of a given size become too heavy to be transported and fall out of suspension, consequently causing deposition). The purpose of this research is to explore the principles of river competence through field reconnaissance collection and laboratory analysis of fluvial sediment core samples along the Apalachicola River, FL and its distributaries. Sediment core samples were collected in the wetlands and estuarine regions of the Apalachicola River. Sieve and hydrometer analyses were performed to determine the spatial distribution of particle sizes along the river. An existing high resolution hydrodynamic model of the study domain was used to simulate tides and generate river velocities. The Hjulstrom curve and the generated river velocities were used to define whether sediment was being transported, eroded or deposited at the different locations in the river and its distributaries. Parameters such as critical erosion velocity and settling velocity were also calculated to describe sediment transport along the channel. This research provides a better understanding of the fluvial geomorphic system, particularly sediment transport in channels. It also provides excellent validation data for future sediment transport studies in similar fluvial study domains.

Development of a new model for batch sedimentation and application to secondary settling tanks design.

PubMed

Karamisheva, Ralica D; Islam, M A

2005-01-01

Assuming that settling takes place in two zones (a constant rate zone and a variable rate zone), a model using four parameters accounting for the nature of the water-suspension system has been proposed for describing batch sedimentation processes. The sludge volume index (SVI) has been expressed in terms of these parameters. Some disadvantages of the SVI application as a design parameter have been pointed out, and it has been shown that a relationship between zone settling velocity and sludge concentration is more consistent for describing the settling behavior and for design of settling tanks. The permissible overflow rate has been related to the technological parameters of secondary settling tank by simple working equations. The graphical representations of these equations could be used to optimize the design and operation of secondary settling tanks.

Settling Out and Settling In.

ERIC Educational Resources Information Center

Provinzano, James

Socioeconomic characteristics of settled-out Mexican American migrant farmworkers who were in the South Texas-based midwestern migrant stream were examined. By chain identification (each family identified 1 or 2 others), 27 subjects were located. These ex-migrants had, over the years, settled-out in and around a small city (population 40,000) in…

17 CFR 37.403 - Additional requirements for cash-settled swaps.

Code of Federal Regulations, 2014 CFR

2014-04-01

... requirements for cash-settled swaps. (a) For cash-settled swaps, the swap execution facility shall demonstrate that it monitors the pricing of the reference price used to determine cash flows or settlement; (b) For... cash-settled swaps. 37.403 Section 37.403 Commodity and Securities Exchanges COMMODITY FUTURES TRADING...

16 CFR § 1209.4 - Test procedures for determining settled density.

Code of Federal Regulations, 2013 CFR

2013-01-01

... density. § 1209.4 Section § 1209.4 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER... procedures for determining settled density. The settled density of lose fill insulation must be determined.... This section describes the procedure for determining the settled density of loose fill insulation. (a...

Assessment of fine-scale resource selection and spatially explicit habitat suitability modelling for a re-introduced tiger (Panthera tigris) population in central India

PubMed Central

Sarkar, Mriganka Shekhar; Johnson, Jeyaraj A.; Sen, Subharanjan

2017-01-01

Background Large carnivores influence ecosystem functions at various scales. Thus, their local extinction is not only a species-specific conservation concern, but also reflects on the overall habitat quality and ecosystem value. Species-habitat relationships at fine scale reflect the individuals’ ability to procure resources and negotiate intraspecific competition. Such fine scale habitat choices are more pronounced in large carnivores such as tiger (Panthera tigris), which exhibits competitive exclusion in habitat and mate selection strategies. Although landscape level policies and conservation strategies are increasingly promoted for tiger conservation, specific management interventions require knowledge of the habitat correlates at fine scale. Methods We studied nine radio-collared individuals of a successfully reintroduced tiger population in Panna Tiger Reserve, central India, focussing on the species-habitat relationship at fine scales. With 16 eco-geographical variables, we performed Manly’s selection ratio and K-select analyses to define population-level and individual-level variation in resource selection, respectively. We analysed the data obtained during the exploratory period of six tigers and during the settled period of eight tigers separately, and compared the consequent results. We further used the settled period characteristics to model and map habitat suitability based on the Mahalanobis D2 method and the Boyce index. Results There was a clear difference in habitat selection by tigers between the exploratory and the settled period. During the exploratory period, tigers selected dense canopy and bamboo forests, but also spent time near villages and relocated village sites. However, settled tigers predominantly selected bamboo forests in complex terrain, riverine forests and teak-mixed forest, and totally avoided human settlements and agriculture areas. There were individual variations in habitat selection between exploratory and settled periods. Based on threshold limits of habitat selection by the Boyce Index, we established that 83% of core and 47% of buffer areas are now suitable habitats for tiger in this reserve. Discussion Tiger management often focuses on large-scale measures, but this study for the first time highlights the behaviour and fine-scale individual-specific habitat selection strategies. Such knowledge is vital for management of critical tiger habitats and specifically for the success of reintroduction programs. Our spatially explicit habitat suitability map provides a baseline for conservation planning and optimizing carrying capacity of the tiger population in this reserve. PMID:29114438

Assessment of fine-scale resource selection and spatially explicit habitat suitability modelling for a re-introduced tiger (Panthera tigris) population in central India.

PubMed

Sarkar, Mriganka Shekhar; Krishnamurthy, Ramesh; Johnson, Jeyaraj A; Sen, Subharanjan; Saha, Goutam Kumar

2017-01-01

Large carnivores influence ecosystem functions at various scales. Thus, their local extinction is not only a species-specific conservation concern, but also reflects on the overall habitat quality and ecosystem value. Species-habitat relationships at fine scale reflect the individuals' ability to procure resources and negotiate intraspecific competition. Such fine scale habitat choices are more pronounced in large carnivores such as tiger ( Panthera tigris ), which exhibits competitive exclusion in habitat and mate selection strategies. Although landscape level policies and conservation strategies are increasingly promoted for tiger conservation, specific management interventions require knowledge of the habitat correlates at fine scale. We studied nine radio-collared individuals of a successfully reintroduced tiger population in Panna Tiger Reserve, central India, focussing on the species-habitat relationship at fine scales. With 16 eco-geographical variables, we performed Manly's selection ratio and K-select analyses to define population-level and individual-level variation in resource selection, respectively. We analysed the data obtained during the exploratory period of six tigers and during the settled period of eight tigers separately, and compared the consequent results. We further used the settled period characteristics to model and map habitat suitability based on the Mahalanobis D 2 method and the Boyce index. There was a clear difference in habitat selection by tigers between the exploratory and the settled period. During the exploratory period, tigers selected dense canopy and bamboo forests, but also spent time near villages and relocated village sites. However, settled tigers predominantly selected bamboo forests in complex terrain, riverine forests and teak-mixed forest, and totally avoided human settlements and agriculture areas. There were individual variations in habitat selection between exploratory and settled periods. Based on threshold limits of habitat selection by the Boyce Index, we established that 83% of core and 47% of buffer areas are now suitable habitats for tiger in this reserve. Tiger management often focuses on large-scale measures, but this study for the first time highlights the behaviour and fine-scale individual-specific habitat selection strategies. Such knowledge is vital for management of critical tiger habitats and specifically for the success of reintroduction programs. Our spatially explicit habitat suitability map provides a baseline for conservation planning and optimizing carrying capacity of the tiger population in this reserve.

Computed tomography guided percutaneous injection of a mixture of lipiodol and methylene blue in rabbit lungs: evaluation of localization ability for video-assisted thoracoscopic surgery.

PubMed

Jin, Kwang Nam; Lee, Kyung Won; Kim, Tae Jung; Song, Yong Sub; Kim, Dong Il

2014-01-01

Preoperative localization is necessary prior to video assisted thoracoscopic surgery for the detection of small or deeply located lung nodules. We compared the localization ability of a mixture of lipiodol and methylene blue (MLM) (0.6 mL, 1:5) to methylene blue (0.5 mL) in rabbit lungs. CT-guided percutaneous injections were performed in 21 subjects with MLM and methylene blue. We measured the extent of staining on freshly excised lung and evaluated the subjective localization ability with 4 point scales at 6 and 24 hr after injections. For MLM, radio-opacity was evaluated on the fluoroscopy. We considered score 2 (acceptable) or 3 (excellent) as appropriate for localization. The staining extent of MLM was significantly smaller than methylene blue (0.6 vs 1.0 cm, P<0.001). MLM showed superior staining ability over methylene blue (2.8 vs 2.2, P=0.010). Excellent staining was achieved in 17 subjects (81%) with MLM and 8 (38%) with methylene blue (P=0.011). An acceptable or excellent radio-opacity of MLM was found in 13 subjects (62%). An appropriate localization rate of MLM was 100% with the use of the directly visible ability and radio-opacity of MLM. MLM provides a superior pulmonary localization ability over methylene blue.

Computed Tomography Guided Percutaneous Injection of a Mixture of Lipiodol and Methylene Blue in Rabbit Lungs: Evaluation of Localization Ability for Video-Assisted Thoracoscopic Surgery

PubMed Central

Jin, Kwang Nam; Kim, Tae Jung; Song, Yong Sub; Kim, Dong Il

2014-01-01

Preoperative localization is necessary prior to video assisted thoracoscopic surgery for the detection of small or deeply located lung nodules. We compared the localization ability of a mixture of lipiodol and methylene blue (MLM) (0.6 mL, 1:5) to methylene blue (0.5 mL) in rabbit lungs. CT-guided percutaneous injections were performed in 21 subjects with MLM and methylene blue. We measured the extent of staining on freshly excised lung and evaluated the subjective localization ability with 4 point scales at 6 and 24 hr after injections. For MLM, radio-opacity was evaluated on the fluoroscopy. We considered score 2 (acceptable) or 3 (excellent) as appropriate for localization. The staining extent of MLM was significantly smaller than methylene blue (0.6 vs 1.0 cm, P<0.001). MLM showed superior staining ability over methylene blue (2.8 vs 2.2, P=0.010). Excellent staining was achieved in 17 subjects (81%) with MLM and 8 (38%) with methylene blue (P=0.011). An acceptable or excellent radio-opacity of MLM was found in 13 subjects (62%). An appropriate localization rate of MLM was 100% with the use of the directly visible ability and radio-opacity of MLM. MLM provides a superior pulmonary localization ability over methylene blue. PMID:24431917

Turbulent shear spurs settlement in larval sea urchins

PubMed Central

Gaylord, Brian; Hodin, Jason; Ferner, Matthew C.

2013-01-01

Marine invertebrates commonly produce larvae that disperse in ocean waters before settling into adult shoreline habitat. Chemical and other seafloor-associated cues often facilitate this latter transition. However, the range of effectiveness of such cues is limited to small spatial scales, creating challenges for larvae in finding suitable sites at which to settle, especially given that they may be carried many kilometers by currents during their planktonic phase. One possible solution is for larvae to use additional, broader-scale environmental signposts to first narrow their search to the general vicinity of a candidate settlement location. Here we demonstrate strong effects of just such a habitat-scale cue, one with the potential to signal larvae that they have arrived in appropriate coastal areas. Larvae of the purple sea urchin (Strongylocentrotus purpuratus) exhibit dramatic enhancement in settlement following stimulation by turbulent shear typical of wave-swept shores where adults of this species live. This response manifests in an unprecedented fashion relative to previously identified cues. Turbulent shear does not boost settlement by itself. Instead, it drives a marked developmental acceleration that causes “precompetent” larvae refractory to chemical settlement inducers to immediately become “competent” and thereby reactive to such inducers. These findings reveal an unrecognized ability of larval invertebrates to shift the trajectory of a major life history event in response to fluid-dynamic attributes of a target environment. Such an ability may improve performance and survival in marine organisms by encouraging completion of their life cycle in advantageous locations. PMID:23572585

Postoperative Walking Ability of Non-ambulatory Cervical Myelopathy Patients.

PubMed

Takeoka, Yoshiki; Kaneyama, Shuichi; Sumi, Masatoshi; Kasahara, Koichi; Kanemura, Aritetsu; Takabatake, Masato; Hirata, Hiroaki; Tsubosaka, Masanori

2018-02-16

A retrospective analysis. The aim of this study was to clarify the postoperative improvement of walking ability and prognostic factors in nonambulatory patients with cervical myelopathy. Many researchers have reported the surgical outcome in compressive cervical myelopathy. However, regarding severe gait disturbance,, it has not been clarified yet how much improvement can be expected. One hundred thirty-one nonambulatory patients with cervical myelopathy were treated surgically and followed for an average of 3 years. Walking ability was graded according to the lower-extremity function subscore (L/E subscore) in Japanese Orthopedic Association score. We divided patients based on preoperative L/E subscores: group A, L/E subscore of 1 point (71 patients); and group B, 0 or 0.5 point (60 patients). The postoperative walking ability was graded by L/E subscore: excellent, ≥2 points; good, 1.5 points; fair, 1 point; and poor, 0.5 or 0 points. We compared preoperative and postoperative scores. The cutoff value of disease duration providing excellent improvement was investigated. Overall, 50 patients were graded as excellent (38.2%), and 21 patients were graded as good (16.0%). In group B, 17 patients (28.3%) were graded as excellent. Seventeen patients who were graded as excellent had shorter durations of myelopathic symptoms and/or gait disturbance (7.9 and 3.8 months respectively) than the others (29.5 and 8.9 months, respectively) (P < 0.05). Receiver-operating characteristic curve showed that the optimal cutoff values of the duration of myelopathic symptoms and gait disturbance providing excellent improvement were 3 and 2 months, respectively. Even if the patients were nonambulatory, 28.3% of them became able to walk without support after operation. If a patient becomes nonambulatory within 3 months from the onset of myelopathy or 2 months from the onset of gait disturbance, surgical treatment should be performed immediately to raise the possibility to improve stable gait. 3.

Student Satisfaction in Higher Education: Settling up and Settling Down

ERIC Educational Resources Information Center

Skea, Claire

2017-01-01

Student satisfaction measures serve to provide a measure of "quality" in the current audit culture of universities. This paper argues that the form of satisfaction valued within contemporary Higher Education amounts to a form of settling, where the primary aim is to settle the students' expectations, and meet their needs. Drawing…

A new settling velocity model to describe secondary sedimentation.

PubMed

Ramin, Elham; Wágner, Dorottya S; Yde, Lars; Binning, Philip J; Rasmussen, Michael R; Mikkelsen, Peter Steen; Plósz, Benedek Gy

2014-12-01

Secondary settling tanks (SSTs) are the most hydraulically sensitive unit operations in biological wastewater treatment plants. The maximum permissible inflow to the plant depends on the efficiency of SSTs in separating and thickening the activated sludge. The flow conditions and solids distribution in SSTs can be predicted using computational fluid dynamics (CFD) tools. Despite extensive studies on the compression settling behaviour of activated sludge and the development of advanced settling velocity models for use in SST simulations, these models are not often used, due to the challenges associated with their calibration. In this study, we developed a new settling velocity model, including hindered, transient and compression settling, and showed that it can be calibrated to data from a simple, novel settling column experimental set-up using the Bayesian optimization method DREAM(ZS). In addition, correlations between the Herschel-Bulkley rheological model parameters and sludge concentration were identified with data from batch rheological experiments. A 2-D axisymmetric CFD model of a circular SST containing the new settling velocity and rheological model was validated with full-scale measurements. Finally, it was shown that the representation of compression settling in the CFD model can significantly influence the prediction of sludge distribution in the SSTs under dry- and wet-weather flow conditions. Copyright © 2014 Elsevier Ltd. All rights reserved.

A combined Settling Tube-Photometer for rapid measurement of effective sediment particle size

NASA Astrophysics Data System (ADS)

Kuhn, Nikolaus J.; Kuhn, Brigitte; Rüegg, Hans-Rudolf; Zimmermann, Lukas

2017-04-01

Sediment and its movement in water is commonly described based on the size distribution of the mineral particles forming the sediment. While this approach works for coarse sand, pebbles and gravel, smaller particles often form aggregates, creating material of larger diameters than the mineral grain size distribution indicates, but lower densities than often assumed 2.65 g cm-3 of quartz. The measurement of the actual size and density of such aggregated sediment is difficult. For the assessment of sediment movement an effective particle size for the use in mathematical can be derived based on the settling velocity of sediment. Settling velocity of commonly measured in settling tubes which fractionate the sample in settling velocity classes by sampling material at the base in selected time intervals. This process takes up to several hours, requires a laboratory setting and carries the risk of either destruction of aggregates during transport or coagulation while sitting in rather still water. Measuring the velocity of settling particles in situ, or at least a rapidly after collection, could avoids these problems. In this study, a settling tube equipped with four photometers used to measure the darkening of a settling particle cloud is presented and the potential to improve the measurement of settling velocities are discussed.

Simulation of sediment settling in reduced gravity

NASA Astrophysics Data System (ADS)

Kuhn, Nikolaus; Kuhn, Brigitte; Rüegg, Hans-Rudolf; Gartmann, Andres

2015-04-01

Gravity has a non-linear effect on the settling velocity of sediment particles in liquids and gases due to the interdependence of settling velocity, drag and friction. However, Stokes' Law or similar empirical models, the common way of estimating the terminal velocity of a particle settling in a gas or liquid, carry the notion of a drag as a property of a particle, rather than a force generated by the flow around the particle. For terrestrial applications, this simplifying assumption is not relevant, but it may strongly influence the terminal velocity achieved by settling particles on other planetary bodies. False estimates of these settling velocities will, in turn, affect the interpretation of particle sizes observed in sedimentary rocks, e.g. on Mars and the search for traces of life. Simulating sediment settling velocities on other planets based on a numeric simulation using Navier-Stokes equations and Computational Fluid Dynamics requires a prohibitive amount of time and lacks measurements to test the quality of the results. The aim of the experiments presented in this study was therefore to quantify the error incurred by using settling velocity models calibrated on Earth at reduced gravities, such as those on the Moon and Mars. In principle, the effect of lower gravity on settling velocity can be achieved by reducing the difference in density between particle and liquid. However, the use of such analogues creates other problems because the properties (i.e. viscosity) and interaction of the liquids and sediment (i.e. flow around the boundary layer between liquid and particle) differ from those of water and mineral particles. An alternative for measuring the actual settling velocities of particles under reduced gravity, on Earth, is offered by placing a settling tube on a reduced gravity flight and conduct settling velocity measurements within the 20 to 25 seconds of Martian gravity that can be simulated during such a flight. In this presentation, the results of the during the MarsSedEx I and II reduced gravity flights are reported, focusing both on the feasibility of experiments in reduced gravity as well as the error incurred when using terrestrial drag coefficients to calculate sediment settling on another planet.

Dissolution of Calcite in the Twilight Zone: Bacterial Control of Dissolution of Sinking Planktonic Carbonates Is Unlikely

PubMed Central

Bissett, Andrew; Neu, Thomas R.; de Beer, Dirk

2011-01-01

We investigated the ability of bacterial communities to colonize and dissolve two biogenic carbonates (Foraminifera and oyster shells). Bacterial carbonate dissolution in the upper water column is postulated to be driven by metabolic activity of bacteria directly colonising carbonate surfaces and the subsequent development of acidic microenvironments. We employed a combination of microsensor measurements, scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and image analysis and molecular documentation of colonising bacteria to monitor microbial processes and document changes in shell surface topography. Bacterial communities rapidly colonised shell surfaces, forming dense biofilms with extracellular polymeric substance (EPS) deposits. Despite this, we found no evidence of bacterially mediated carbonate dissolution. Dissolution was not indicated by Ca2+ microprofiles, nor was changes in shell surface structure related to the presence of colonizing bacteria. Given the short time (days) settling carbonate material is actually in the twilight zone (500–1000 m), it is highly unlikely that microbial metabolic activity on directly colonised shells plays a significant role in dissolving settling carbonates in the shallow ocean. PMID:22102861

Dissolution of calcite in the twilight zone: bacterial control of dissolution of sinking planktonic carbonates is unlikely.

PubMed

Bissett, Andrew; Neu, Thomas R; Beer, Dirk de

2011-01-01

We investigated the ability of bacterial communities to colonize and dissolve two biogenic carbonates (Foraminifera and oyster shells). Bacterial carbonate dissolution in the upper water column is postulated to be driven by metabolic activity of bacteria directly colonising carbonate surfaces and the subsequent development of acidic microenvironments. We employed a combination of microsensor measurements, scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and image analysis and molecular documentation of colonising bacteria to monitor microbial processes and document changes in shell surface topography. Bacterial communities rapidly colonised shell surfaces, forming dense biofilms with extracellular polymeric substance (EPS) deposits. Despite this, we found no evidence of bacterially mediated carbonate dissolution. Dissolution was not indicated by Ca²⁺ microprofiles, nor was changes in shell surface structure related to the presence of colonizing bacteria. Given the short time (days) settling carbonate material is actually in the twilight zone (500-1000 m), it is highly unlikely that microbial metabolic activity on directly colonised shells plays a significant role in dissolving settling carbonates in the shallow ocean.

Hindrance Velocity Model for Phase Segregation in Suspensions of Poly-dispersed Randomly Oriented Spheroids

NASA Astrophysics Data System (ADS)

Faroughi, S. A.; Huber, C.

2015-12-01

Crystal settling and bubbles migration in magmas have significant effects on the physical and chemical evolution of magmas. The rate of phase segregation is controlled by the force balance that governs the migration of particles suspended in the melt. The relative velocity of a single particle or bubble in a quiescent infinite fluid (melt) is well characterized; however, the interplay between particles or bubbles in suspensions and emulsions and its effect on their settling/rising velocity remains poorly quantified. We propose a theoretical model for the hindered velocity of non-Brownian emulsions of nondeformable droplets, and suspensions of spherical solid particles in the creeping flow regime. The model is based on three sets of hydrodynamic corrections: two on the drag coefficient experienced by each particle to account for both return flow and Smoluchowski effects and a correction on the mixture rheology to account for nonlocal interactions between particles. The model is then extended for mono-disperse non-spherical solid particles that are randomly oriented. The non-spherical particles are idealized as spheroids and characterized by their aspect ratio. The poly-disperse nature of natural suspensions is then taken into consideration by introducing an effective volume fraction of particles for each class of mono-disperse particles sizes. Our model is tested against new and published experimental data over a wide range of particle volume fraction and viscosity ratios between the constituents of dispersions. We find an excellent agreement between our model and experiments. We also show two significant applications for our model: (1) We demonstrate that hindered settling can increase mineral residence time by up to an order of magnitude in convecting magma chambers. (2) We provide a model to correct for particle interactions in the conventional hydrometer test to estimate the particle size distribution in soils. Our model offers a greatly improved agreement with the results obtained with direct measurement methods such as laser diffraction.

Numerical modelling of organic waste dispersion from fjord located fish farms

NASA Astrophysics Data System (ADS)

Ali, Alfatih; Thiem, Øyvind; Berntsen, Jarle

2011-07-01

In this study, a three-dimensional particle tracking model coupled to a terrain following ocean model is used to investigate the dispersion and the deposition of fish farm particulate matter (uneaten food and fish faeces) on the seabed due to tidal currents. The particle tracking model uses the computed local flow field for advection of the particles and random movement to simulate the turbulent diffusion. Each particle is given a settling velocity which may be drawn from a probability distribution according to settling velocity measurements of faecal and feed pellets. The results show that the maximum concentration of organic waste for fast sinking particles is found under the fish cage and continue monotonically decreasing away from the cage area. The maximum can split into two maximum peaks located at both sides of the centre of the fish cage area in the current direction. This process depends on the sinking time (time needed for a particle to settle at the bottom), the tidal velocity and the fish cage size. If the sinking time is close to a multiple of the tidal period, the maximum concentration point will be under the fish cage irrespective of the tide strength. This is due to the nature of the tidal current first propagating the particles away and then bringing them back when the tide reverses. Increasing the cage size increases the likelihood for a maximum waste accumulation beneath the fish farm, and larger farms usually means larger biomasses which can make the local pollution even more severe. The model is validated by using an analytical model which uses an exact harmonic representation of the tidal current, and the results show an excellent agreement. This study shows that the coupled ocean and particle model can be used in more realistic applications to help estimating the local environmental impact due to fish farms.

Where to Settle—Settlement Preferences of Mytilus galloprovincialis and Choice of Habitat at a Micro Spatial Scale

PubMed Central

Carl, Christina; Poole, Andrew J.; Williams, Mike R.; de Nys, Rocky

2012-01-01

The global mussel aquaculture industry uses specialised spat catching and nursery culture ropes made of multi-filament synthetic and natural fibres to optimise settlement and retention of mussels for on-growing. However, the settlement ecology and preferences of mussels are poorly understood and only sparse information exists in a commercial context. This study quantified the settlement preferences of pediveligers and plantigrades of Mytilus galloprovincialis on increasingly complex surfaces and settlement locations at a micro spatial scale on and within ropes under commercial hatchery operating conditions using optical microscopy and X-ray micro-computed tomography (µCT). M. galloprovincialis has clear settlement preferences for more complex materials and high selectivity for settlement sites from the pediveliger through to the plantigrade stage. Pediveligers of M. galloprovincialis initially settle inside specialised culture ropes. Larger pediveligers were located close to the exterior of ropes as they increased in size over time. In contrast, smaller individuals were located deeper inside of the ropes over time. This study demonstrates that X-ray µCT is an excellent non-destructive technique for mapping settlement and attachment sites of individuals as early as one day post settlement, and quantifies the number and location of settled individuals on and within ropes as a tool to understand and optimise settlement in complex multi-dimensional materials and environments. PMID:23251710

Comparison of some characteristics of aerobic granules and sludge flocs from sequencing batch reactors.

PubMed

Li, J; Garny, K; Neu, T; He, M; Lindenblatt, C; Horn, H

2007-01-01

Physical, chemical and biological characteristics were investigated for aerobic granules and sludge flocs from three laboratory-scale sequencing batch reactors (SBRs). One reactor was operated as normal SBR (N-SBR) and two reactors were operated as granular SBRs (G-SBR1 and G-SBR2). G-SBR1 was inoculated with activated sludge and G-SBR2 with granules from the municipal wastewater plant in Garching (Germany). The following major parameters and functions were measured and compared between the three reactors: morphology, settling velocity, specific gravity (SG), sludge volume index (SVI), specific oxygen uptake rate (SOUR), distribution of the volume fraction of extracellular polymeric substances (EPS) and bacteria, organic carbon and nitrogen removal. Compared with sludge flocs, granular sludge had excellent settling properties, good solid-liquid separation, high biomass concentration, simultaneous nitrification and denitrification. Aerobic granular sludge does not have a higher microbial activity and there are some problems including higher effluent suspended solids, lower ratio of VSS/SS and no nitrification at the beginning of cultivation. Measurement with CLSM and additional image analysis showed that EPS glycoconjugates build one main fraction inside the granules. The aerobic granules from G-SBR1 prove to be heavier, smaller and have a higher microbial activity compared with G-SBR2. Furthermore, the granules were more compact, with lower SVI and less filamentous bacteria.

VIEW LOOKING EAST. THE NORTH WALL OF SETTLING RESERVOIR NO. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW LOOKING EAST. THE NORTH WALL OF SETTLING RESERVOIR NO. 3 IS AT THE LEFT. THE BLAISDELL SLOW SAND FILTER WASHING MACHINE IS SEEN AT THE UPPER LEFT AND SETTLING RESERVOIR NO. 4 IS SEEN BEYOND THE EAST WALL OF SETTLING RESERVOIR NO. 3. - Yuma Main Street Water Treatment Plant, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

An elutriation apparatus for assessing settleability of combined sewer overflows (CSOs).

PubMed

Marsalek, J; Krishnappan, B G; Exall, K; Rochfort, Q; Stephens, R P

2006-01-01

An elutriation apparatus was proposed for testing the settleability of combined sewer outflows (CSOs) and applied to 12 CSO samples. In this apparatus, solids settling is measured under dynamic conditions created by flow through a series of settling chambers of varying diameters and upward flow velocities. Such a procedure reproduces better turbulent settling in CSO tanks than the conventional settling columns, and facilitates testing coagulant additions under dynamic conditions. Among the limitations, one could name the relatively large size of the apparatus and samples (60 L), and inadequate handling of floatables. Settleability results obtained for the elutriation apparatus and a conventional settling column indicate large inter-event variation in CSO settleability. Under such circumstances, settling tanks need to be designed for "average" conditions and, within some limits, the differences in test results produced by various settleability testing apparatuses and procedures may be acceptable. Further development of the elutriation apparatus is under way, focusing on reducing flow velocities in the tubing connecting settling chambers and reducing the number of settling chambers employed. The first measure would reduce the risk of floc breakage in the connecting tubing and the second one would reduce the required sample size.

Research advances and challenges in one-dimensional modeling of secondary settling tanks--a critical review.

PubMed

Li, Ben; Stenstrom, M K

2014-11-15

Sedimentation is one of the most important processes that determine the performance of the activated sludge process (ASP), and secondary settling tanks (SSTs) have been frequently investigated with the mathematical models for design and operation optimization. Nevertheless their performance is often far from satisfactory. The starting point of this paper is a review of the development of settling theory, focusing on batch settling and the development of flux theory, since they played an important role in the early stage of SST investigation. The second part is an explicit review of the established 1-D SST models, including the relevant physical law, various settling behaviors (hindered, transient, and compression settling), the constitutive functions, and their advantages and disadvantages. The third part is a discussion of numerical techniques required to solve the governing equation, which is usually a partial differential equation. Finally, the most important modeling challenges, such as settleability description, settling behavior understanding, are presented. Copyright © 2014 Elsevier Ltd. All rights reserved.

Concept of Sukha (comfort) mentioned in Dhatusarata (tissue excellence) w.s.r. to vocational guidance.

PubMed

Waghulade, Hemangini; Harit, Mahesh Kumar

2014-01-01

Agni (digestive fire), Prakruti (constitution), Dhatusarata (tissue excellence), Dosha (bio-energies) are the specialties of Ayurveda on which diagnosis, treatment and research are based. The description of Dhatusarata (tissue excellence) has been given under Dashavidha Pariksha (tenfold examination) in Charak Samhita, Viman Sthana, 8(th) chapter. Some qualities, which are mentioned in Dhatusarata are difficult to assess, e.g. Sukha, Aishwarya, Upabhoga, Bala, etc., There is a need to develop some quantitative parameters to measure these qualities according to tissue excellence i.e. Dhatusarata. By assessing Dhatu Sarata, one can judge the true strength of a particular Dhatu but only the ability or strength is not enough to get success; the liking or interest is also essential to achieve success. The purpose of this study is to elaborate the concept of Dhatusarata and reveal different aspects of Sukha according to the quality of that particular Dhatu in context of vocational guidance. It will help to establish interrelationship between Dhatusarata and vocational guidance. It will be assessed whether this Sukha quality is merely happiness or having different shades according to the excellence of Dhatus and whether this study is useful in guiding the person to choose appropriate profession, which will be according to his liking and ability. It has been concluded that shades of Sukha quality varies with particular Dhatusaras, which may be helpful in guiding a suitable profession to an individual which will be according to his ability and liking i.e. Sukha for intimate success.

A new "P" for hospital marketing?

PubMed

Hill, R C

1988-01-01

The rather abrupt introduction of payors to hospitals and vice versa that started a few years ago has now settled down into a learning situation. To be price competitive in the health insurance marketplace, the payor must obtain full contractual performance in price, administrative and utilization review areas. Hospitals need the patients that payors can refer, but there is only a minimal understanding of how the health insurance industry operates both internally and in the marketplace. By selecting payors and soliciting those selected, hospitals have an excellent chance to accomplish their patient and revenue goals while payors have the opportunity to determine the effectiveness of their various programs to help meet their goals. By making a little effort, hospitals can accomplish a lot by adding this new "P" to their marketing mix.

Serum sickness-like reaction after influenza vaccination.

PubMed

Chiong, Fabian Joon Kiong; Loewenthal, Mark; Boyle, Michael; Attia, John

2015-12-16

Serum sickness (SS) and SS-like reaction (SSLR) are rare immune complex-mediated hypersensitivity illnesses characterised by key features of fever, rash, polyarthralgia or polyarthritis. They are self-limiting with an excellent prognosis, settling as the antigen is cleared. We describe a 30-year-old man who presented with fever, rash, polyarthralgia and subcutaneous soft tissue swelling in his hands and feet at day 5 after influenza vaccination. A thorough investigation for infective and autoimmune causes for the presenting symptoms was negative. Given the temporal relationship between the symptoms and influenza vaccination, clinical evidence and biological plausibility of influenza vaccination causing SSLR, a clinical diagnosis of SSLR was made. The patient was treated with anti-histamines, non-steroidal anti-inflammatories and glucocorticoids with gradual resolution of symptoms over 5 weeks. 2015 BMJ Publishing Group Ltd.

Interaction of lifestyle and work ability index in blue collar workers.

PubMed

Mohammadi, Saber; Ghaffari, Mostafa; Abdi, Alireza; Bahadori, Baharak; Mirzamohammadi, Elham; Attarchi, Mirsaeed

2014-11-17

Early labor force exit is one of the major problems worldwide. The present study investigates the relationship between work ability and lifestyle. This study was conducted at a manufacturing plant in Tehran in 2012. All 851 male workers in this plant were included into the study and their work ability was assessed using the Work Ability Index (WAI). Based on the obtained scores, the participants were then classified into four work ability groups (poor, moderate, good, or excellent). Moreover, the participants' lifestyles were studied in three areas, including physical activity, cigarette smoking, and Body Mass Index (BMI). The average work ability index score was 42.07, ranging from 7-48. Among the participants, 6.4% (43), 6.5% (44), 38.3% (259), and 48.8% (330) were in the groups with poor, moderate, good, and excellent work ability, respectively. The results of logistic regression analysis showed that there is a significant relationship between work ability and lifestyle (cigarette smoking, BMI, and physical activity) even after adjustment for confounding variables (P<0.05). According to the results of the present study, there might be a relationship between work ability and lifestyle (physical activity, BMI, cigarette smoking). Therefore, it is recommended to implement a lifestyle quality enhancement program to improve work ability in working environments.

Work ability as a determinant of old age disability severity: evidence from the 28-year Finnish Longitudinal Study on Municipal Employees.

PubMed

von Bonsdorff, Mikaela B; Seitsamo, Jorma; Ilmarinen, Juhani; Nygård, Clas-Håkan; von Bonsdorff, Monika E; Rantanen, Taina

2012-08-01

Lower occupational class correlates with a higher disability risk later in life. However, it is not clear whether the demands made by mental and physical work relative to individual resources in midlife predict well-being in old age. This study investigated prospectively whether work ability in midlife predicts disability severity in activities of everyday living in old age. Data come from the population-based 28-year follow-up called Finnish Longitudinal Study of Municipal Employees. A total of 2879 occupationally active persons aged 44-58 years answered a questionnaire on work ability at baseline in 1981 and activities of daily living in 2009. At baseline, perceived work ability relative to lifetime best was categorized into excellent, moderate, and poor work ability. At follow-up, disability scales were constructed based on the severity and frequency of difficulties reported in self-care activities of daily living (ADL) and instrumental activities of daily living (IADL). There was a graded prevalence of ADL and IADL disability severity, according to excellent, moderate and poor midlife work ability (p<0.001). Employees with moderate midlife work ability had an 11 to 20% higher mean ADL or IADL disability severity score, compared with those with excellent midlife work ability (reference), incidence rate ratios (IRR) ranging from 1.11 (95% CI 1.01-1.22) to 1.20 (95% CI 1.10-1.30). Those with poor midlife work ability had a mean ADL or IADL disability severity score 27 to 38% higher than the referent, IRRs ranging from 1.27 (95% CI 1.09-1.47) to 1.38 (95% CI 1.25-1.53). Adjusting for socio-economics, lifestyle factors and chronic diseases only slightly attenuated the associations. Work ability, an indicator of the de- mands made by mental and physical work relative to individuals' mental and physical resources, predicted disability severity 28 years later among middle-aged municipal employees.

Carryover effects from natal habitat type upon competitive ability lead to trait divergence or source-sink dynamics.

PubMed

Kristensen, Nadiah Pardede; Johansson, Jacob; Chisholm, Ryan A; Smith, Henrik G; Kokko, Hanna

2018-06-25

Local adaptation to rare habitats is difficult due to gene flow, but can occur if the habitat has higher productivity. Differences in offspring phenotypes have attracted little attention in this context. We model a scenario where the rarer habitat improves offspring's later competitive ability - a carryover effect that operates on top of local adaptation to one or the other habitat type. Assuming localised dispersal, so the offspring tend to settle in similar habitat to the natal type, the superior competitive ability of offspring remaining in the rarer habitat hampers immigration from the majority habitat. This initiates a positive feedback between local adaptation and trait divergence, which can thereafter be reinforced by coevolution with dispersal traits that match ecotype to habitat type. Rarity strengthens selection on dispersal traits and promotes linkage disequilibrium between locally adapted traits and ecotype-habitat matching dispersal. We propose that carryover effects may initiate isolation by ecology. © 2018 The Authors. Ecology Letters published by CNRS and John Wiley & Sons Ltd.

Promoting Instructional Excellence through a Teacher Reward System: Herzberg's Theory Applied.

ERIC Educational Resources Information Center

Frase, Larry E.; And Others

1982-01-01

An Arizona school district's program to reward teaching excellence uses as an incentive, instead of merit pay, something that will enhance the teacher's ability to assist children in the classroom. Rewards include attendance at conferences or computers and other classroom instructional materials. (Author/JM)

Settling behavior of unpurified Cryptosporidium oocysts in laboratory settling columns.

PubMed

Young, Pamela L; Komisar, Simeon J

2005-04-15

The settling behavior of fresh and aged unpurified oocysts was examined in settling column suspensions with varied ionic strengths and concentrations of calcium and magnesium. Independent measurements of the size and density of unpurified oocysts were performed to determine a theoretical settling velocity for the test populations. Viability of the oocysts was assessed using a dye permeability assay. Latex microspheres were included to provide a standard by which to assess the settling conditions in the columns. Mean settling velocities for viable oocysts measured in this work were faster than predicted and faster than measured for purified oocysts in other work: 1.31 (+/-0.21) microm/s for viable oocysts from populations having a low percentage of viable oocysts and 1.05 (+/-0.20) microm/s for viable oocysts from populations with a high percentage of viable oocysts. Results were attributed to the higher than previously reported densities measured for oocysts in this study and the presence of fecal material, which allowed opportunity for particle agglomeration. Settling velocity of oocysts was significantly related to the viability of the population, particle concentration, ionic strength, and presence of calcium and magnesium in the suspending medium. Behavior of the latex microspheres was not entirely predictive of the behavior of the oocysts under the test conditions. Viable oocysts may have a greater probability of settling than previously assumed; however, nonviable, and especially nonintact, oocysts have the potential to be significantly transported in water. This work underscores the importance of assessing the viability of oocysts to predict their response to environmental and experimental conditions.

Crystal accumulation in the Hanford Waste Treatment Plant high level waste melter: Summary of FY2016 experiements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, K.; Fowley, M.; Miller, D.

2016-12-01

Five experiments were completed with the full-scale, room temperature Hanford Waste Treatment and Immobilization Plant (WTP) high-level waste (HLW) melter riser test system to observe particle flow and settling in support of a crystal tolerant approach to melter operation. A prototypic pour rate was maintained based on the volumetric flow rate. Accumulation of particles was observed at the bottom of the riser and along the bottom of the throat after each experiment. Measurements of the accumulated layer thicknesses showed that the settled particles at the bottom of the riser did not vary in thickness during pouring cycles or idle periods.more » Some of the settled particles at the bottom of the throat were re-suspended during subsequent pouring cycles, and settled back to approximately the same thickness after each idle period. The cause of the consistency of the accumulated layer thicknesses is not year clear, but was hypothesized to be related to particle flow back to the feed tank. Additional experiments reinforced the observation of particle flow along a considerable portion of the throat during idle periods. Limitations of the system are noted in this report and may be addressed via future modifications. Follow-on experiments will be designed to evaluate the impact of pouring rate on particle re-suspension, the influence of feed tank agitation on particle accumulation, and the effect of changes in air lance positioning on the accumulation and re-suspension of particles at the bottom of the riser. A method for sampling the accumulated particles will be developed to support particle size distribution analyses. Thicker accumulated layers will be intentionally formed via direct addition of particles to select areas of the system to better understand the ability to continue pouring and re-suspend particles. Results from the room temperature system will be correlated with observations and data from the Research Scale Melter (RSM) at Pacific Northwest National Laboratory, and coordinated with modeling efforts underway at Idaho National Laboratory.« less

F-doped VO2 nanoparticles for thermochromic energy-saving foils with modified color and enhanced solar-heat shielding ability.

PubMed

Dai, Lei; Chen, Shi; Liu, Jianjun; Gao, Yanfeng; Zhou, Jiadong; Chen, Zhang; Cao, Chuanxiang; Luo, Hongjie; Kanehira, Minoru

2013-07-28

F-doped VO2 (M1) nanoparticles were prepared via one-pot hydrothermal synthesis. The F-doping can minimise the size of the VO2 (M1) nanoparticles, induce a homogeneous size distribution and effectively decrease the phase transition temperature to 35 °C at 2.93% F in VO2. VO2 smart glass foils obtained by casting these nanoparticles exhibit excellent thermochromism in the near-infrared region, which suggests that these foils can be used for energy-efficient glass. Compared to a pure VO2 foil, the 2.93% F-doped VO2 foil exhibits an increased solar-heat shielding ability (35.1%) and a modified comfortable colour, while still retaining an excellent solar modulation ability (10.7%) and an appropriate visible transmittance (48.7%). The F-doped VO2 foils are the first to simultaneously meet the requirements of a reduced phase transition temperature, diluted colour and excellent thermochromic properties, and these properties make the further improved F-doped VO2 foils suitable for commercial applications in energy efficient glass.

Factors influencing suspended solids concentrations in activated sludge settling tanks.

PubMed

Kim, Y; Pipes, W O

1999-05-31

A significant fraction of the total mass of sludge in an activated sludge process may be in the settling tanks if the sludge has a high sludge volume index (SVI) or when a hydraulic overload occurs during a rainstorm. Under those conditions, an accurate estimate of the amount of sludge in the settling tanks is needed in order to calculate the mean cell residence time or to determine the capacity of the settling tanks to store sludge. Determination of the amount of sludge in the settling tanks requires estimation of the average concentration of suspended solids in the layer of sludge (XSB) in the bottom of the settling tanks. A widely used reference recommends averaging the concentrations of suspended solids in the mixed liquor (X) and in the underflow (Xu) from the settling tanks (XSB=0. 5{X+Xu}). This method does not take into consideration other pertinent information available to an operator. This is a report of a field study which had the objective of developing a more accurate method for estimation of the XSB in the bottom of the settling tanks. By correlation analysis, it was found that only 44% of the variation in the measured XSB is related to sum of X and Xu. XSB is also influenced by the SVI, the zone settling velocity at X and the overflow and underflow rates of the settling tanks. The method of averaging X and Xu tends to overestimate the XSB. A new empirical estimation technique for XSB was developed. The estimation technique uses dimensionless ratios; i.e., the ratio of XSB to Xu, the ratio of the overflow rate to the sum of the underflow rate and the initial settling velocity of the mixed liquor and sludge compaction expressed as a ratio (dimensionless SVI). The empirical model is compared with the method of averaging X and Xu for the entire range of sludge depths in the settling tanks and for SVI values between 100 and 300 ml/g. Since the empirical model uses dimensionless ratios, the regression parameters are also dimensionless and the model can be readily adopted for other activated sludge processes. A simplified version of the empirical model provides an estimation of XSB as a function of X, Xu and SVf and can be used by an operator when flow conditions are normal. Copyright 1999 Elsevier Science B.V.

Effects of taper and space settings of telescopic Ce-TZP/A crowns on retentive force and settling.

PubMed

Nakagawa, Shusuke; Torii, Katsunori; Tanaka, Masahiro

2017-03-31

The aim of this study was to investigate the effect of the taper and space setting of using Ce-TZP/A on retentive force and secondary crown settling. The taper were 2°, 4°, and 6°, and the space settings were 0 and 10 μm. The applied loads were 50 and 100 N. The taper had a significant effect on retentive force and settling at both loads (p<0.05). The space settings did not have a significant effect on retentive force or settling at either load (p<0.05). The taper of the telescopic crowns and the load affected the retentive force and the settling.

Total and settling velocity-fractionated pollution potential of sewer sediments in Jiaxing, China.

PubMed

Zhou, Yongchao; Zhang, Ping; Zhang, Yiping; Li, Jin; Zhang, Tuqiao; Yu, Tingchao

2017-10-01

Sewer sediments and their associated contaminant released along with wet-weather discharges pose potential pollution risks to environment. This paper presents total characteristics of sediments collected from Jiaxing, China. Size distribution and concentrations of volatile solids (VS) and four metals (Pb, Cu, Zn, Cr) of sediment samples from seven land use categories were analyzed. Then, the sediment samples were graded five fractions according to its settling velocity through the custom-built settling velocity-grading device. Sediment mass and pollution load distribution based on settling velocity were also assessed. The results show that there are relatively high level of heavy metal load in the sediment of separated storm drainage systems in Jiaxing, especially for the catchment of residential area (RA), road of developed area (RDA), and industrial area (IA). Although grain size follows a trend of increasing along with settling velocity, the methods of settling velocity grading are meaningful for stormwater treatment facilities with precipitation. For all land use categories, the pollution concentrations of the three lower settling velocity-fractionated sediment are relatively consistent and higher than others. Combined with mass distribution, the pollution percentage of fraction with different velocities for seven land use categories were also evaluated. Based on it, the statistical conclusion of design target settling velocity to different pollution load removal rates are drawn, which is helpful to guide design of on-site precipitation separation facilities.

17. VIEW OF SETTLING BASIN, SHOWING FLUME TRACK SPUR CROSSING ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

17. VIEW OF SETTLING BASIN, SHOWING FLUME TRACK SPUR CROSSING OVER SETTLING BASIN, SPARE BENT MATERIAL IN RIGHT-HAND FOREGROUND, BYPASS FLUME, AND SHACK #6 IN BACKGROUND, LOOKING NORTHWEST - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA

Effect of gravity on terminal particle settling velocity on Moon, Mars and Earth

NASA Astrophysics Data System (ADS)

Kuhn, Nikolaus J.

2013-04-01

Gravity has a non-linear effect on the settling velocity of sediment particles in liquids and gases due to the interdependence of settling velocity, drag and friction. However, StokeśLaw, the common way of estimating the terminal velocity of a particle moving in a gas of liquid assumes a linear relationship between terminal velocity and gravity. For terrestrial applications, this "error" is not relevant, but it may strongly influence the terminal velocity achieved by settling particles on Mars. False estimates of these settling velocities will, in turn, affect the interpretation of particle sizes observed in sedimentary rocks on Mars. Wrong interpretations may occur, for example, when the texture of sedimentary rocks is linked to the amount and hydraulics of runoff and thus ultimately the environmental conditions on Mars at the time of their formation. A good understanding of particle behaviour in liquids on Mars is therefore essential. In principle, the effect of lower gravity on settling velocity can also be achieved by reducing the difference in density between particle and gas or liquid. However, the use of such analogues simulating the lower gravity on Mars on Earth is creates other problems because the properties (i.e. viscosity) and interaction of the liquids and sediment (i.e. flow around the boundary layer between liquid and particle) differ from those of water and mineral particles. An alternative for measuring the actual settling velocities of particles under Martian gravity, on Earth, is offered by placing a settling tube on a reduced gravity flight and conduct settling tests within the 20 to 25 seconds of Martian gravity that can be simulated during such a flight. In this presentation we report the results of such a test conducted during a reduced gravity flight in November 2012. The results explore the strength of the non-linearity in the gravity-settling velocity relationship for terrestrial, lunar and Martian gravity.

Size matters for violent discharge height and settling speed of Sphagnum spores: important attributes for dispersal potential.

PubMed

Sundberg, Sebastian

2010-02-01

Initial release height and settling speed of diaspores are biologically controlled components which are key to modelling wind dispersal. Most Sphagnum (peat moss) species have explosive spore liberation. In this study, how capsule and spore sizes affect the height to which spores are propelled were measured, and how spore size and spore number of discharged particles relate to settling speed in the aspherical Sphagnum spores. Spore discharge and spore cloud development were filmed in a closed chamber (nine species). Measurements were taken from snapshots at three stages of cloud development. Settling speed of spores (14 species) and clusters were timed in a glass tube. The maximum discharge speed measured was 3.6 m s(-1). Spores reached a maximum height of 20 cm (average: 15 cm) above the capsule. The cloud dimensions at all stages were related positively to capsule size (R(2) = 0.58-0.65). Thus species with large shoots (because they have large capsules) have a dispersal advantage. Half of the spores were released as singles and the rest as clusters (usually two to four spores). Single spores settled at 0.84-1.86 cm s(-1), about 52 % slower than expected for spherical spores with the same diameters. Settling speed displayed a positive curvilinear relationship with spore size, close to predictions by Stokes' law for spherical spores with 68 % of the actual diameters. Light-coloured spores settled slower than dark spores. Settling speed of spore clusters agrees with earlier studies. Effective spore discharge and small, slowly settling spores appear particularly important for species in forested habitats. The spore discharge heights in Sphagnum are among the greatest for small, wind-dispersed propagules. The discharge heights and the slow settling of spores affect dispersal distances positively and may help to explain the wide distribution of most boreal Sphagnum species.

Size matters for violent discharge height and settling speed of Sphagnum spores: important attributes for dispersal potential

PubMed Central

Sundberg, Sebastian

2010-01-01

Background and Aims Initial release height and settling speed of diaspores are biologically controlled components which are key to modelling wind dispersal. Most Sphagnum (peat moss) species have explosive spore liberation. In this study, how capsule and spore sizes affect the height to which spores are propelled were measured, and how spore size and spore number of discharged particles relate to settling speed in the aspherical Sphagnum spores. Methods Spore discharge and spore cloud development were filmed in a closed chamber (nine species). Measurements were taken from snapshots at three stages of cloud development. Settling speed of spores (14 species) and clusters were timed in a glass tube. Key Results The maximum discharge speed measured was 3·6 m s−1. Spores reached a maximum height of 20 cm (average: 15 cm) above the capsule. The cloud dimensions at all stages were related positively to capsule size (R2 = 0·58–0·65). Thus species with large shoots (because they have large capsules) have a dispersal advantage. Half of the spores were released as singles and the rest as clusters (usually two to four spores). Single spores settled at 0·84–1·86 cm s−1, about 52 % slower than expected for spherical spores with the same diameters. Settling speed displayed a positive curvilinear relationship with spore size, close to predictions by Stokes' law for spherical spores with 68 % of the actual diameters. Light-coloured spores settled slower than dark spores. Settling speed of spore clusters agrees with earlier studies. Effective spore discharge and small, slowly settling spores appear particularly important for species in forested habitats. Conclusions The spore discharge heights in Sphagnum are among the greatest for small, wind-dispersed propagules. The discharge heights and the slow settling of spores affect dispersal distances positively and may help to explain the wide distribution of most boreal Sphagnum species. PMID:20123930

Improvement of primary settling performance with activated sludge.

PubMed

Yetis, U; Tarlan, E

2002-04-01

In biological treatment plants employing activated sludge processes, it is possible to recirculate some portion of the waste activated sludge that is not sent to the aeration basin, to the inlet of the primary sedimentation tanks. But in the literature there is no detailed information about the conditions, ratios and the characteristics of the waste sludge that can be recirculated back. However, depending on its settling characteristics, the addition of waste activated sludge to raw wastewater may improve primary settling. Settling tests have shown that the effect of waste activated sludge on primary settling is strongly dependent on the mean cell residence time (or sludge age), theta(c), of the waste activated sludge and also on the suspended solids concentration. Different sludge ages of 4, 6, 8, 10, 14, 20 and 26 days, and for each sludge age at least five different initial suspended solids concentrations were studied. A sludge age of 8-10 days achieved the optimum efficiency in terms of the remaining suspended solids concentration as well as percent-suspended solids removal. Also, the settled sludge volumes were measured throughout the experiments; so, the comparison was made between settled sludge volumes, initial suspended solids (SS) concentrations and theta(c).

7 CFR 1956.71 - Settling uncollectible recapture receivables.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 14 2010-01-01 2009-01-01 true Settling uncollectible recapture receivables. 1956.71 Section 1956.71 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE... Multi-Family Housing § 1956.71 Settling uncollectible recapture receivables. The settlement of...

Modelling approaches for pipe inclination effect on deposition limit velocity of settling slurry flow

NASA Astrophysics Data System (ADS)

Matoušek, Václav; Kesely, Mikoláš; Vlasák, Pavel

2018-06-01

The deposition velocity is an important operation parameter in hydraulic transport of solid particles in pipelines. It represents flow velocity at which transported particles start to settle out at the bottom of the pipe and are no longer transported. A number of predictive models has been developed to determine this threshold velocity for slurry flows of different solids fractions (fractions of different grain size and density). Most of the models consider flow in a horizontal pipe only, modelling approaches for inclined flows are extremely scarce due partially to a lack of experimental information about the effect of pipe inclination on the slurry flow pattern and behaviour. We survey different approaches to modelling of particle deposition in flowing slurry and discuss mechanisms on which deposition-limit models are based. Furthermore, we analyse possibilities to incorporate the effect of flow inclination into the predictive models and select the most appropriate ones based on their ability to modify the modelled deposition mechanisms to conditions associated with the flow inclination. A usefulness of the selected modelling approaches and their modifications are demonstrated by comparing model predictions with experimental results for inclined slurry flows from our own laboratory and from the literature.

Treatment of HMX-production wastewater in an aerobic granular reactor.

PubMed

Zhang, Jin-Hua; Wang, Min-Hui; Zhu, Xiao-Meng

2013-04-01

Aerobic granules were applied to the treatment of HMX-production wastewater using a gradual domestication method in a SBR. During the process, the granules showed a good settling ability, a high biomass retention rate, and high biological activity. After 40 days of stable operation, aerobic granular sludge performed very effectively in the removal of carbon and nitrogen compounds from HMX-production wastewater. Organic matter removal rates up to 97.57% and nitrogen removal efficiencies up to 80% were achieved during the process. Researchers conclude that using aerobic granules to treat explosive wastewater has good prospects for success.

Laboratory trials reveal that exposure to extreme raining events prior to metamorphosis affect the post-settlement performance of an estuarine crab

NASA Astrophysics Data System (ADS)

Rey, Felisa; Silva Neto, Gina M.; Rosa, Rui; Queiroga, Henrique; Calado, Ricardo

2015-03-01

Meteorological forcing can impact planktonic communities, with extreme raining events promoting salinity decreases and triggering larval mortality in estuarine plankton. The present study evaluated how exposure to low salinities prior to metamorphosis of Carcinus maenas megalopae (last larval stage) may affect its ability to metamorphose and the post-metamorphosis performance of juvenile crabs. An extreme raining event that promoted a generalized decrease in salinity (from 25 to 10) in the whole water column of one of the main channels of a coastal lagoon was mimicked in the laboratory. Wild megalopae of C. maenas were collected and kept individually without any food at salinities of 10 or 25 (S10 or S25) until they either died or metamorphosed to the first crab instar (C1). Specimens metamorphosing in 5 days or less following their collection were labeled as early settlers (ES10 and ES25), while those taking more than 5 days were labeled as late settlers (LS10 and LS25). All newly metamorphosed crabs were kept individually until C5 at a salinity of 25 and fed ad libitum, with their intermolt periods and carapace width (CW) being recorded. Osmotic stress did not affect the survival or ability to metamorphose of C. maenas megalopae, with 89% of all larvae in both salinities being able to metamorphose. This result is supported by the ability of this larval stage to hyper-regulate. Nonetheless, an exposure of late settling megalopae to low salinities prior to metamorphosis promotes the occurrence of juvenile crabs with a smaller CW. The deleterious effects of exposing late settling megalopae to low salinities appears to be magnified during early benthic life, with C5 originating from treatment LS10 displaying a significantly smaller CW (4.87 ± 0.28 mm) and lower wet weight (WW) (28.95 ± 4.62 mg). On the other side, C5 originating from ES25 exhibited a significantly higher CW (5.90 ± 0.33 mm) and WW (50.89 ± 8.14 mg). The nutritional vulnerability experienced by megalopae starved for longer periods (late settlers) may have been magnified for specimens exposed to a lower salinity, with the energetic costs associated with hyper-regulation negatively affecting the growth performance of juvenile crabs. Osmotic stress experienced by late settling megalopae can shape adult populations of C. maenas by promoting the occurrence of smaller juveniles, thus more vulnerable to predation and cannibalism. Phenotypic links must be incorporated in the study of marine invertebrates, namely when life stages are vulnerable to metereological forcing (e.g., extreme rainfall) at critical periods of their life-cycle (e.g., metamorphosis).

Vertical Transport of Sediment from Muddy Buoyant River Plumes in the Presence of Different Modes of Interfacial Instabilities

NASA Astrophysics Data System (ADS)

Strom, K.; Rouhnia, M.

2016-12-01

Previous studies have suggested that sedimentation from buoyant, muddy plumes lofting over clear saltwater can take place at rates higher than that expected from individual particle settling (i.e., CWs). Two potential drivers of enhanced sedimentation are flocculation and interfacial instabilities. We experimentally measured the sediment fluxes from each of these processes using two sets of laboratory experiments that investigate two different modes of instability, one driven by sediment settling and one driven by fluid shear. The settling-driven and shear-driven instability experiments were carried out in a stagnant stratification tank and a stratification flume respectively. In both sets, continuous interface monitoring and concentration measurements were made to observe developments of instabilities and their effects on the removal of sediment. Floc size was measured during the experiments using a floc camera and image analysis routines. This presentation will provide an overview of the stagnant tank experiments, but will focus on results from the stratified flume experiments and an analysis that attempts to synthesizes the results from the entirety of the study. The results from the stratified flume experiments show that under shear instabilities, the effective settling velocity is greater than the floc settling velocity, and that the rate increases with plume velocity and interface mixing. The difference between effective and floc settling velocity was denoted as the shear-induced settling velocity. This rate was found to be a strong function of the Richardson number, and was attributed to mixing processes at the interface. Conceptual and empirical analysis shows that the shear-induced settling velocity is proportional to URi-2. The resulting effective settling velocity models developed from these experiments are then used to examine the rates and potential locations of operations of these mechanism over the length of a river mouth plume.

Approximate Model of Zone Sedimentation

NASA Astrophysics Data System (ADS)

Dzianik, František

2011-12-01

The process of zone sedimentation is affected by many factors that are not possible to express analytically. For this reason, the zone settling is evaluated in practice experimentally or by application of an empirical mathematical description of the process. The paper presents the development of approximate model of zone settling, i.e. the general function which should properly approximate the behaviour of the settling process within its entire range and at the various conditions. Furthermore, the specification of the model parameters by the regression analysis of settling test results is shown. The suitability of the model is reviewed by graphical dependencies and by statistical coefficients of correlation. The approximate model could by also useful on the simplification of process design of continual settling tanks and thickeners.

Gravity influence on the clustering of charged particles in turbulence

NASA Astrophysics Data System (ADS)

Lu, Jiang; Nordsiek, Hansen; Shaw, Raymond

2010-11-01

We report results aimed at studying the interactions of bidisperse charged inertial particles in homogeneous, isotropic turbulence, under the influence of gravitational settling. We theoretically and experimentally investigate the impact of gravititational settling on particle clustering, which is quantified by the radial distribution function (RDF). The theory is based on a drift-diffusion (Fokker-Planck) model with gravitational settling appearing as a diffusive term depending on a dimensionless settling parameter. The experiments are carried out in a laboratory chamber with nearly homogeneous, isotropic turbulence in which the flow is seeded with charged particles and digital holography used to obtain 3D particle positions and velocities. The derived radial distribution function for bidisperse settling charged particles is compared to the experimental RDFs.

Sewage sludge additive

NASA Technical Reports Server (NTRS)

Kalvinskas, J. J.; Mueller, W. A.; Ingham, J. D. (Inventor)

1980-01-01

The additive is for a raw sewage treatment process of the type where settling tanks are used for the purpose of permitting the suspended matter in the raw sewage to be settled as well as to permit adsorption of the dissolved contaminants in the water of the sewage. The sludge, which settles down to the bottom of the settling tank is extracted, pyrolyzed and activated to form activated carbon and ash which is mixed with the sewage prior to its introduction into the settling tank. The sludge does not provide all of the activated carbon and ash required for adequate treatment of the raw sewage. It is necessary to add carbon to the process and instead of expensive commercial carbon, coal is used to provide the carbon supplement.

Batch settling curve registration via image data modeling.

PubMed

Derlon, Nicolas; Thürlimann, Christian; Dürrenmatt, David; Villez, Kris

2017-05-01

To this day, obtaining reliable characterization of sludge settling properties remains a challenging and time-consuming task. Without such assessments however, optimal design and operation of secondary settling tanks is challenging and conservative approaches will remain necessary. With this study, we show that automated sludge blanket height registration and zone settling velocity estimation is possible thanks to analysis of images taken during batch settling experiments. The experimental setup is particularly interesting for practical applications as it consists of off-the-shelf components only, no moving parts are required, and the software is released publicly. Furthermore, the proposed multivariate shape constrained spline model for image analysis appears to be a promising method for reliable sludge blanket height profile registration. Copyright © 2017 Elsevier Ltd. All rights reserved.

Profile of Scientific Ability of Chemistry Education Students in Basic Physics Course

NASA Astrophysics Data System (ADS)

Suastika, K. G.; Sudyana, I. N.; Lasiani, L.; Pebriyanto, Y.; Kurniawati, N.

2017-09-01

The weakness of scientific ability of students in college has been being a concern in this case, especially in terms of laboratory activities to support Laboratory Based Education. Scientific ability is a basic ability that must be dominated by students in basic physics lecturing process as a part of scientific method. This research aims to explore the indicators emergence of the scientific ability of students in Chemistry Education of Study Program, Faculty of Teaching and Education University of Palangka Raya through Inquiry Based Learning in basic physics courses. This research is a quantitative research by using descriptive method (descriptive-quantitative). Students are divided into three categories of group those are excellent group, low group, and heterogeneous group. The result shows that the excellent group and low group have same case that were occured decreasing in the percentage of achievement of scientific ability, while in heterogeneous group was increased. The differentiation of these results are caused by enthusiastic level of students in every group that can be seen in tables of scientific ability achievement aspects. By the results of this research, hoping in the future can be a references for further research about innovative learning strategies and models that can improve scientific ability and scientific reasoning especially for science teacher candidates.

Excel VBA for Physicists; A Primer

NASA Astrophysics Data System (ADS)

Liengme, Bernard V.

2016-11-01

This book is both an introduction and a demonstration of how Visual Basic for Applications (VBA) can greatly enhance Microsoft Excel® by giving users the ability to create their own functions within a worksheet and to create subroutines to perform repetitive actions. The book is written so readers are encouraged to experiment with VBA programming with examples using fairly simple physics or non-complicated mathematics such as root finding and numerical integration. Tested Excel® workbooks are available for each chapter and there is nothing to buy or install. A tested Excel workbook for each chapter can be downloaded from Book information

10. SETTLING TANK CLEANOUT DOORS, SOUTH SIDE; USED TO CLEAN ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. SETTLING TANK CLEAN-OUT DOORS, SOUTH SIDE; USED TO CLEAN DEBRIS FROM SURFACE OF WATER IN SETTLING TANK. - Hondius Water Line, 1.6 miles Northwest of Park headquarters building & 1 mile Northwest of Beaver Meadows entrance station, Estes Park, Larimer County, CO

SEDIDAT: A BASIC program for the collection and statistical analysis of particle settling velocity data

NASA Astrophysics Data System (ADS)

Wright, Robyn; Thornberg, Steven M.

SEDIDAT is a series of compiled IBM-BASIC (version 2.0) programs that direct the collection, statistical calculation, and graphic presentation of particle settling velocity and equivalent spherical diameter for samples analyzed using the settling tube technique. The programs follow a menu-driven format that is understood easily by students and scientists with little previous computer experience. Settling velocity is measured directly (cm,sec) and also converted into Chi units. Equivalent spherical diameter (reported in Phi units) is calculated using a modified Gibbs equation for different particle densities. Input parameters, such as water temperature, settling distance, particle density, run time, and Phi;Chi interval are changed easily at operator discretion. Optional output to a dot-matrix printer includes a summary of moment and graphic statistical parameters, a tabulation of individual and cumulative weight percents, a listing of major distribution modes, and cumulative and histogram plots of a raw time, settling velocity. Chi and Phi data.

An assessment of a new settling velocity parameterisation for cohesive sediment transport modeling

NASA Astrophysics Data System (ADS)

Baugh, John V.; Manning, Andrew J.

2007-07-01

An important element within the Defra funded Estuary Process Research project "EstProc" was the implementation of the new or refined algorithms, produced under EstProc, into cohesive sediment numerical models. The implementation stage was important as any extension in the understanding of estuarine processes from EstProc was required to be suitable for dissemination into the wider research community with a level of robustness for general applications demonstrated. This report describes work undertaken to implement the new Manning Floc Settling Velocity Model, developed during EstProc. All Manning component algorithms could be combined to provide estimates of mass settling flux. The algorithms are initially assessed in a number of 1-D scenarios, where the Manning model output is compared against both real observations and the output from alternative settling parameterisations. The Manning model is then implemented into a fully 3-D computational model (TELEMAC3D) of estuarine hydraulics and sediment transport of the Lower Thames estuary. The 3-D model results with the Manning algorithm included were compared to runs with a constant settling velocity of 0.5 mm s -1 and settling velocity based on a simple linear multiplier of concentration and with the above mentioned observations of suspended concentration. The findings of the 1-D case studies found the Manning empirical settling model could reproduce 93% of the total mass settling flux observed over a spring tidal cycle. The floc model fit was even better within the turbidity maximum (TM) zone. A constant 0.5 mm s -1 only estimated 15% of the TM mass flux, whereas the fixed 5 mm s -1 settling rate over-predicted the TM mass flux by 47%. Both settling velocity as a simple linear function of concentration, and van Leussen's method, did not fare much better estimating less than half the observed flux during the various tidal and sub-tidal cycle periods. When the Manning-settling model was applied to a layer with suspended concentrations approaching 6 g l -1, it calculated 96% of the observed mass flux. The main conclusions of the implementation exercise were that it was feasible to implement a complex relationship between settling velocity and concentration in a 3-D computational model of estuarine hydraulics, without producing any significant increase in model run times or reducing model stability. The use of the Manning algorithm greatly improved the reproduction of the observed distribution of suspended concentration both in the vertical and horizontal directions compared to the other simulations. During the 1-D assessments, the Manning-settling model demonstrated flexibility in adapting to a wide range of estuarine environmental conditions (i.e. shear stress and concentration), specifically for applied modelling purposes.

42 CFR 3.514 - Authority to settle.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Authority to settle. 3.514 Section 3.514 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY... exclusive authority to settle any issue or case without the consent of the ALJ. ...

42 CFR 3.514 - Authority to settle.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Authority to settle. 3.514 Section 3.514 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY... exclusive authority to settle any issue or case without the consent of the ALJ. ...

Learning Motivation and Performance Excellence in Adolescents with High Intellectual Potential: What Really Matters?

ERIC Educational Resources Information Center

Schick, Hella; Phillipson, Shane N.

2009-01-01

In the development of performance excellence, the relative roles played by intellectual ability and motivation remain speculative. This study investigates the role played by general intelligence, school environment, self-efficacy, and aspects of personal identity in the formation of learning motivation in German students attending the Gymnasium…

Pumps, Centrifugal and Reciprocating

DTIC Science & Technology

2011-04-27

Never 1 2 3 4 5 6 7 8 9 Always 2. Speaking ability (enunciation, volume, etc.) Poor 1 2 3 4 5 6 7 8 9 Excellent 3...Subject knowledge Poor 1 2 3 4 5 6 7 8 9 Excellent 4. Treatment of students Discourteous 1 2 3 4 5 6 7 8 9 Courteous 5. Aware

Numerical study of spherical Taylor-Couette flow

NASA Technical Reports Server (NTRS)

Yang, R.-J.

1989-01-01

A new technique to simulate Taylor vortices in a spherical gap between a rotating inner sphere and a stationary outer one has been developed and tested. Paths leading to zero-, one-, and two-vortex flows are designed heuristically. Fictitious symmetric boundaries near the equator are imposed, and the choice of the location of the fictitious boundaries is determined by either one- or two-vortex flow being stimulated. The imposition of one or two fictitious boundaries during the initial calculation generates the state suitable for one-or two-vortex flow to exist. After removing the fictitious boundaries, the flow settles down into its own attractor. Using this method, the three steady flow modes can be simulated by using a half domain. The technique can converge to desired flows very fast, and its results show excellent agreement with experimental ones.

Modeling VLF signal modulation during solar flares with GEANT4 Monte Carlo simulation, a simple chemical model and LWPC

NASA Astrophysics Data System (ADS)

Palit, Sourav; Chakrabarti, Sandip Kumar; Pal, Sujay; Basak, Tamal

Extra ionization by X-rays during solar flares affects VLF signal propagation through D-region ionosphere. Ionization produced in the lower ionosphere due to X-ray spectra of solar flares are simulated with an efficient detector simulation program, GEANT4. The balancing between the ionization and loss processes, causing the lower ionosphere to settle back to its undisturbed state is handled with a simple chemical model consisting of four broad species of ion densities. Using the electron densities, modified VLF signal amplitude is then computed with LWPC code. VLF signal along NWC (Australia) to IERC/ICSP (India) propagation path is examined during a M and a X-type solar flares and observational deviations are compared with simulated results. The agreement is found to be excellent.

Methyl parathion detection in vegetables and fruits using silver@graphene nanoribbons nanocomposite modified screen printed electrode

NASA Astrophysics Data System (ADS)

Govindasamy, Mani; Mani, Veerappan; Chen, Shen-Ming; Chen, Tse-Wei; Sundramoorthy, Ashok Kumar

2017-04-01

We have developed a sensitive electrochemical sensor for Organophosphorus pesticide methyl parathion (MP) using silver particles supported graphene nanoribbons (Ag@GNRs). The Ag@GNRs nanocomposite was prepared through facile wet chemical strategy and characterized by TEM, EDX, XRD, Raman, UV-visible, electrochemical and impedance spectroscopies. The Ag@GNRs film modified screen printed carbon electrode (SPCE) delivers excellent electrocatalytic ability to the reduction of MP. The Ag@GNRs/SPCE detects sub-nanomolar concentrations of MP with excellent selectivity. The synergic effects between special electrocatalytic ability of Ag and excellent physicochemical properties of GNRs (large surface area, high conductivity, high area-normalized edge-plane structures and abundant catalytic sites) make the composite highly suitable for MP sensing. Most importantly, the method is successfully demonstrated in vegetables and fruits which revealed its potential real-time applicability in food analysis.

42 CFR 3.416 - Authority to settle.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 1 2011-10-01 2011-10-01 false Authority to settle. 3.416 Section 3.416 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY... subpart limits the authority of the Secretary to settle any issue or case or to compromise any penalty. ...

42 CFR 3.416 - Authority to settle.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Authority to settle. 3.416 Section 3.416 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY... subpart limits the authority of the Secretary to settle any issue or case or to compromise any penalty. ...

45 CFR 2554.48 - Can the administrative complaint be settled voluntarily?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Can the administrative complaint be settled voluntarily? 2554.48 Section 2554.48 Public Welfare Regulations Relating to Public Welfare (Continued... Appeals § 2554.48 Can the administrative complaint be settled voluntarily? (a) Parties may make offers of...

Dateline USA: Settling the West, 1800-1900.

ERIC Educational Resources Information Center

Chatton, Barbara; O'Laughlin, Michael

1998-01-01

Presents an annotated bibliography of titles related to the theme "Settling the West" which are appropriate for primary, elementary, and middle grades. Topics include overviews of Western history; early 19th century; the gold rush; the pony express; travelers by trail, rail, and ship; settling the West; cowboys and cattle; and the…

Symmetry Breaking Drift of Particles Settling in Homogeneous Shear Turbulence

NASA Astrophysics Data System (ADS)

van Hinsberg, M. A. T.; Clercx, H. J. H.; Toschi, Federico

2016-08-01

We investigate the influence of shear on the gravitational settling of heavy inertial particles in homogeneous shear turbulence (HST). In addition to the well-known enhanced settling velocity, observed for heavy inertial particles in homogeneous isotropic turbulence (HIT), a horizontal drift velocity is also observed in the shearing direction due to the presence of a nonzero mean vorticity (introducing symmetry breaking due to the mean shear). This drift velocity is due to the combination of shear, gravity, and turbulence, and all three of these elements are needed for this effect to occur. We extend the mechanism responsible for the enhanced settling velocity in HIT to the case of HST. Two separate regimes are observed, characterized by positive or negative drift velocity, depending on the particle settling velocity.

Tuberculosis treatment outcome and health services: a comparison of displaced and settled population groups in Khartoum, Sudan.

PubMed

Bøhler, M; Mustafaa, S A; Mørkve, O

2005-01-01

The Sudan National Tuberculosis Programme serves internally displaced and settled populations in Khartoum, Sudan. To investigate whether treatment in the camps is satisfactory compared to the settled population and to World Health Organization (WHO) standards, and to map certain characteristics of the clinics that may explain differences in treatment outcome. A register analysis was done on sputum smear-positive and retreatment tuberculosis patients registered consecutively in the first and second quarters of 2000. The nine health facilities from which the patients were selected were investigated using a questionnaire. State tuberculosis officers were interviewed about regional treatment policies. Two hundred and ninety-five internally displaced and 154 settled patients from respectively five and four clinics were included. The cure and completion rates among new sputum smear-positive cases were significantly higher among displaced (65% and 9.3%) than among settled persons (43.5% and 21%). Displaced groups had better adherence to 5 and 8 month smear examinations, and the quantity of health education was higher in the camps than among the settled population. Tuberculosis treatment among the displaced population in Khartoum compares favourably with the neighbouring settled population, but both groups still face serious challenges to fulfil the WHO goals.

Migration and hypertension: a cross-sectional study among neo-migrants and settled-migrants in Delhi, India.

PubMed

Kusuma, Yadlapalli; Gupta, Sanjeev; Pandav, Chandrakant

2009-10-01

Understanding the blood pressure (BP) distribution within populations is fundamental to an understanding of the etiology of cardiovascular diseases and to develop effective preventive strategies. This study focuses on whether the BP levels and hypertension prevalence differ between neo-migrants and settled-migrants in the city of Delhi. Data on BP, anthropometry, social variables, and demographic variables were collected from a cross-sectional sample of 226 settled-migrants and 227 neo-migrants. Men possessed significantly higher BP levels than women. Settled-migrants possessed higher BP levels, except diastolic BP in males. The prevalence of hypertension ranges from 15% (neo-migrant women) to 25% (settled-migrant men), with no significant gender differences. Group differences were significant for men. Hypertension was more prevalent in older settled-migrants and younger neo-migrants. Recent migration was found to be a significant contributor to hypertension prevalence. Age contributed significantly to BP variation in both groups except in neo-migrant men. Pulse rate also contributed to systolic BP among neo-migrant women and settled-migrant men. Thus, urban residence and migration to urban areas can be a leading cause of increased prevalence of hypertension. Neo-migrants were subjected to more lifestyle insults and the stress generated during the adjustment process may be contributing to rise of BP even at younger ages.

Assessment of the relationship between physical working conditions and different levels of work ability.

PubMed

Attarchi, Mirsaeed; Ghaffari, Mostafa; Abdi, Alireza; Mirzamohammadi, Elham; Seyedmehdi, Seyed Mohammad; Rahimpour, Farzaneh; Fazlalizadeh, Maryam; Mohammadi, Saber

2014-04-20

Early leaving of workplace by work forces is one of the fundamental problems worldwide. Maintenance and enhancement of employees work ability are important for raising productivity. This study investigated the relationship between work ability index and physical working conditions and was carried out in 2013 on 641 workers at a manufacturing plant in Tehran. Work ability was assessed by the questionnaire of work ability index and the participants were classified into four work ability groups of poor, moderate, good, and excellent. Physical working conditions were evaluated by the MUSIC-Norrtalje questionnaire and the participants were classified into two groups with proper and poor physical working conditions. The mean score of work ability questionnaire was 42.40; and 2.5% (16 persons), 9.2% (59 persons), 38.2% (245 persons), and 50.1% (321 persons) of the participants were in poor, moderate, good, and excellent work ability groups, respectively. The mean score of physical working conditions questionnaire was 20.06. The results of logistic regression analysis showed that even after adjusting the confounding variables, a significant correlation existed between work ability and physical working conditions (p < 0.05). According to the results of this study, there may be a correlation between physical working conditions such as awkward postures, repetitive movements, load lifting, exposure to whole body vibration and so on with work ability. Therefore it seems that enhancement of the quality of physical working conditions may increase work ability.

Assessment of the Relationship between Physical Working Conditions and Different Levels of Work Ability

PubMed Central

Attarchi, Mirsaeed; Ghaffari, Mostafa; Abdi, Alireza; Mirzamohammadi, Elham; Seyedmehdi, Seyed Mohammad; Rahimpour, Farzaneh; Fazlalizadeh, Maryam; Mohammadi, Saber

2014-01-01

Early leaving of workplace by work forces is one of the fundamental problems worldwide. Maintenance and enhancement of employees work ability are important for raising productivity. This study investigated the relationship between work ability index and physical working conditions and was carried out in 2013 on 641 workers at a manufacturing plant in Tehran. Work ability was assessed by the questionnaire of work ability index and the participants were classified into four work ability groups of poor, moderate, good, and excellent. Physical working conditions were evaluated by the MUSIC-Norrtalje questionnaire and the participants were classified into two groups with proper and poor physical working conditions. The mean score of work ability questionnaire was 42.40; and 2.5% (16 persons), 9.2% (59 persons), 38.2% (245 persons), and 50.1% (321 persons) of the participants were in poor, moderate, good, and excellent work ability groups, respectively. The mean score of physical working conditions questionnaire was 20.06. The results of logistic regression analysis showed that even after adjusting the confounding variables, a significant correlation existed between work ability and physical working conditions (p<0.05). According to the results of this study, there may be a correlation between physical working conditions such as awkward postures, repetitive movements, load lifting, exposure to whole body vibration and so on with work ability. Therefore it seems that enhancement of the quality of physical working conditions may increase work ability. PMID:24999133

Evidence for existence of different Escherichia coli populations in karst aquifer depending on hydrological conditions and the use of watershed. Fabienne Petit1*, Mehdy Ratajczak1, Nicolas Massei 1, Olivier Clermont 2, Erick Denamur 2, Thierry Berthe1,. 1CNRS UMR 6143 M2C, Université de Rouen, FED SCALE 4116, 76821 Mont Saint Aignan 2 INSERM U722, Université Paris 7 Denis Diderot ,75018 Paris

NASA Astrophysics Data System (ADS)

Fabienne, P.; Mehdy, R.; Massei, N.; Clermont, O.; Denamur, E.; Berthe, T.

2011-12-01

Escherichia coli (E. coli) is a commensal bacterium of the gastro-intestinal tract of human and vertebrate animals, even if the aquatic environment could be considered as a secondary habitat. During turbids events consecutive to the rainfall, E.coli are released from manure and feces in karstic hydrosystem with different settling velocities, related to their association to particles. In water, survival of E. coli, was dependant to the grazing by protozoans and their ability to overcome environmental stress. In these conditions, viable but non culturable (VNC) population of E. coli, could be observed. The aim of this study was to investigate, in a small well characterized rural karstic watershed (i) the structure of E. coli population based on the survival ability, the distribution in four main phylo-groups (A, B1, B2, D), and the phenotypic characteristics, (ii) the fate and the distribution of viable non culturable E. coli according their settling velocities, from surface water to groundwater. For this purpose we combined microbiology and hydrology approaches, and solid phase cytometry (ChemScan°RDI) methodology was performed to numbered VNC E. coli. The distribution in the four main E. coli phylo-groups (A, B1, B2, D) shown that the E. coli population structure was modified not only by the hydrological conditions but also the use of the watershed (presence of cattle). Survival abilities of E. coli strains based on microcosm experiments, vary from 2 days to at least 14 days. Characterization of E. coli was performed by studying specific traits present in host-associated strains (virulence factors, antibiotic resistance) and those that could be involved in water persistence (growth temperature substrate range, biofilm formation and grazing by protozoa). Three major clusters of strains were defined by using a correspondence factor analysis. In water characterized by high level of fecal contamination a first cluster of E. coli strains was related to A and B2 phylo-group, presented a multiple-antibiotic-resistance profile, and had low survival abilities in water. In slightly contaminated water, E. coli strains were persistent in water, sensitive to antibiotics, and able to develop at low temperature (from 7°C to 20°C) and to degrade macromolecules. In the same karstic hydrosystem, whatever the hydrological conditions, a population of E. coli in VNC state was observed, even in dry period where VNC E. coli raised to 96% of the total viable E. coli population. The distribution of the E. coli VNC population according to their settling velocity varies along the transfer between the swallow hole to the spring. Thus rapid flow inside karstic aquifer supports the culturability of E. coli. In contrast, in during low-flow period with slow transport of contaminant, E. coli lose their culturability but could maintained inside in VNC state in such hydrosystem.

Antithetic proportional-integral feedback for reduced variance and improved control performance of stochastic reaction networks.

PubMed

Briat, Corentin; Gupta, Ankit; Khammash, Mustafa

2018-06-01

The ability of a cell to regulate and adapt its internal state in response to unpredictable environmental changes is called homeostasis and this ability is crucial for the cell's survival and proper functioning. Understanding how cells can achieve homeostasis, despite the intrinsic noise or randomness in their dynamics, is fundamentally important for both systems and synthetic biology. In this context, a significant development is the proposed antithetic integral feedback (AIF) motif, which is found in natural systems, and is known to ensure robust perfect adaptation for the mean dynamics of a given molecular species involved in a complex stochastic biomolecular reaction network. From the standpoint of applications, one drawback of this motif is that it often leads to an increased cell-to-cell heterogeneity or variance when compared to a constitutive (i.e. open-loop) control strategy. Our goal in this paper is to show that this performance deterioration can be countered by combining the AIF motif and a negative feedback strategy. Using a tailored moment closure method, we derive approximate expressions for the stationary variance for the controlled network that demonstrate that increasing the strength of the negative feedback can indeed decrease the variance, sometimes even below its constitutive level. Numerical results verify the accuracy of these results and we illustrate them by considering three biomolecular networks with two types of negative feedback strategies. Our computational analysis indicates that there is a trade-off between the speed of the settling-time of the mean trajectories and the stationary variance of the controlled species; i.e. smaller variance is associated with larger settling-time. © 2018 The Author(s).

Marrying Step Feed with Secondary Clarifier Improvements to Significantly Increase Peak Wet Weather Treatment Capacity: An Integrated Methodology.

PubMed

Daigger, Glen T; Siczka, John S; Smith, Thomas F; Frank, David A; McCorquodale, J A

2017-08-01

  The need to increase the peak wet weather secondary treatment capacity of the City of Akron, Ohio, Water Reclamation Facility (WRF) provided the opportunity to test an integrated methodology for maximizing the peak wet weather secondary treatment capacity of activated sludge systems. An initial investigation, consisting of process modeling of the secondary treatment system and computational fluid dynamics (CFD) analysis of the existing relatively shallow secondary clarifiers (3.3 and 3.7 m sidewater depth in 30.5 m diameter units), indicated that a significant increase in capacity from 416 000 to 684 000 m3/d or more was possible by adding step feed capabilities to the existing bioreactors and upgrading the existing secondary clarifiers. One of the six treatment units at the WRF was modified, and an extensive 2-year testing program was conducted to determine the total peak wet weather secondary treatment capacity achievable. The results demonstrated that a peak wet weather secondary treatment capacity approaching 974 000 m3/d is possible as long as secondary clarifier solids and hydraulic loadings could be separately controlled using the step feed capability provided. Excellent sludge settling characteristics are routinely experienced at the City of Akron WRF, raising concerns that the identified peak wet weather secondary treatment capacity could not be maintained should sludge settling characteristics deteriorate for some reason. Computational fluid dynamics analysis indicated that the impact of the deterioration of sludge settling characteristics could be mitigated and the identified peak wet weather secondary treatment capacity maintained by further use of the step feed capability provided to further reduce secondary clarifier solids loading rates at the identified high surface overflow rates. The results also demonstrated that effluent limits not only for total suspended solids (TSS) and five-day carbonaceous biochemical oxygen demand (cBOD5) could be maintained, but also for ammonia-nitrogen and total phosphorous (TP). Although hydraulic limitations in other parts of the WRP prevent this full capacity to be realized, the City is proceeding to implement the modifications identified using this integrated methodology.

The Key Pieces of the Career Survival and Success Puzzle.

ERIC Educational Resources Information Center

Simonetti, Jack L.

1999-01-01

Analysis of career-success factors identified by 5,000 managers yielded 10 key pieces: excellent performance record, communication skills, interpersonal skills, personality, skill currency, significant work experiences, power, ability to withstand pressure, ability to make difficult decisions, and having a mentor. (SK)

Porphyrinoids as a platform of stable radicals

PubMed Central

Shimizu, Daiki

2018-01-01

The non-innocent ligand nature of porphyrins was observed for compound I in enzymatic cycles of cytochrome P450. Such porphyrin radicals were first regarded as reactive intermediates in catabolism, but recent studies have revealed that porphyrinoids, including porphyrins, ring-contracted porphyrins, and ring-expanded porphyrins, display excellent radical-stabilizing abilities to the extent that radicals can be handled like usual closed-shell organic molecules. This review surveys four types of stable porphyrinoid radical and covers their synthetic methods and properties such as excellent redox properties, NIR absorption, and magnetic properties. The radical-stabilizing abilities of porphyrinoids stem from their unique macrocyclic conjugated systems with high electronic and structural flexibilities. PMID:29675188

12 CFR 551.130 - When must I settle a securities transaction?

Code of Federal Regulations, 2010 CFR

2010-01-01

... RECORDKEEPING AND CONFIRMATION REQUIREMENTS FOR SECURITIES TRANSACTIONS Settlement of Securities Transactions § 551.130 When must I settle a securities transaction? (a) You may not effect or enter into a contract... 12 Banks and Banking 5 2010-01-01 2010-01-01 false When must I settle a securities transaction...

22 CFR 304.7 - Authority to adjust, determine, compromise, and settle claims.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 22 Foreign Relations 2 2011-04-01 2009-04-01 true Authority to adjust, determine, compromise, and settle claims. 304.7 Section 304.7 Foreign Relations PEACE CORPS CLAIMS AGAINST GOVERNMENT UNDER FEDERAL TORT CLAIMS ACT Procedures § 304.7 Authority to adjust, determine, compromise, and settle claims. The...

22 CFR 304.7 - Authority to adjust, determine, compromise, and settle claims.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 22 Foreign Relations 2 2014-04-01 2014-04-01 false Authority to adjust, determine, compromise, and settle claims. 304.7 Section 304.7 Foreign Relations PEACE CORPS CLAIMS AGAINST GOVERNMENT UNDER FEDERAL TORT CLAIMS ACT Procedures § 304.7 Authority to adjust, determine, compromise, and settle claims. The...

76 FR 76792 - Self-Regulatory Organizations; The Options Clearing Corporation; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-08

... Euro Interest Rate Futures will be settled in Euros. OCC already clears futures contracts that are settled in Euros, and management believes that the facilities and procedures established in connection with the settlement of the existing Euro-settled futures will generally be sufficient to permit the...

Gravity settling

DOEpatents

Davis, Hyman R.; Long, R. H.; Simone, A. A.

1979-01-01

Solids are separated from a liquid in a gravity settler provided with inclined solid intercepting surfaces to intercept the solid settling path to coalesce the solids and increase the settling rate. The intercepting surfaces are inverted V-shaped plates, each formed from first and second downwardly inclined upwardly curved intersecting conical sections having their apices at the vessel wall.

Spindle Epithelial Tumor with Thymus-Like Differentiation (SETTLE): A Next-Generation Sequencing Study.

PubMed

Stevens, Todd M; Morlote, Diana; Swensen, Jeff; Ellis, Michelle; Harada, Shuko; Spencer, Sharon; Prieto-Granada, Carlos N; Folpe, Andrew L; Gatalica, Zoran

2018-05-07

Spindle epithelial tumor with thymus-like differentiation (SETTLE) is a malignant biphasic neoplasm of the thyroid or neck with propensity for late metastasis. Unlike synovial sarcoma, its main morphologic mimic, SETTLE lacks synovial sarcoma-associated translocations. A single case of SETTLE has shown a KRAS mutation but to date no comprehensive next generation sequencing studies of this rare neoplasm have been undertaken. Herein, we subjected 5 well defined cases of SETTLE to direct sequence analysis of 592 genes and fusion gene analysis of 52 genes frequently rearranged in human cancers. We identified one case with two pathogenic variants in the KMT2D gene, one being in an intron splice site (c.674-1A>G) and the other being a frameshift variant (p.M2829fs). This same case also had a pathogenic nonsense variant in the KMT2C gene (p.R1237*). A second case of SETTLE carried a pathogenic NRAS missense variant, Q61R. No other molecular alterations, microsatellite instability, gene fusions or amplifications were identified.

Test of the MarsSedEx Settling Tube Photometer during the 2nd Swiss Parabolic Flight Campaign

NASA Astrophysics Data System (ADS)

Kuhn, Nikolaus J.; Kuhn, Brigitte; Rüegg, Hans-Rudolf; Zimmermann, Lukas

2017-04-01

Gravity affects flow hydraulics and thus limits the application of simple models for sediment transport developed for Earth on Mars. The significance of the differences in sediment settling has been demonstrated for sand-sized particles by measuring settling velocities using video-imaging during parabolic flights. This approach does not work for finer particles because they cannot be distinguished individually on a video. Tracking of fine sediment clouds is also difficult using videos because changes in density are not captured. Photometers, on the other hand, are able to capture differences in turbidity and offer the potential to measure the settling behaviour of clouds of fine and differently-sized sediment particles. In this study, the feasibility of using a settling-tube photometer used for the rapid assessment of settling velocities developed by the University of Basel during a parabolic flight with reduced gravity is presented. In addition, the potential of the results generated in this Martian-analogue environment to support the identification sediments containing traces of life on Mars is discussed.

Teaching excellence in nursing education: a caring framework.

PubMed

Sawatzky, Jo-Ann V; Enns, Carol L; Ashcroft, Terri J; Davis, Penny L; Harder, B Nicole

2009-01-01

Nursing education plays a central role in the ability to practice effectively. It follows that an optimally educated nursing workforce begets optimal patient care. A framework for excellence in nursing education could guide the development of novice educators, establish the basis for evaluating teaching excellence, and provide the impetus for research in this area. However, a review of the social sciences and nursing literature as well as a search for existing models for teaching excellence revealed an apparent dearth of evidence specific to excellence in nursing education. Therefore, we developed the Caring Framework for Excellence in Nursing Education. This framework evolved from a review of the generic constructs that exemplify teaching excellence: excellence in teaching practice, teaching scholarship, and teaching leadership. Nursing is grounded in the ethic of caring. Hence, caring establishes the foundation for this uniquely nursing framework. Because a teaching philosophy is intimately intertwined with one's nursing philosophy and the ethic of caring, it is also fundamental to the caring framework. Ideally, this framework will contribute to excellence in nursing education and as a consequence excellence in nursing practice and optimal patient care.

Settling and survival profile of enteric pathogens in the swine effluent for water reuse purpose.

PubMed

Fongaro, G; Kunz, A; Magri, M E; Schissi, C D; Viancelli, A; Philippi, L S; Barardi, C R M

2016-11-01

The present study evaluated the pathogens persistence and settling profile in swine effluent. We determined the enteric pathogens settling characteristics, their survival and inactivation profile in swine effluent (for water reuse purpose) and in sludge (generated after aerobic treatment - during secondary settling process). The study was performed in laboratorial-scale and in full-scale (manure treatment plant). Enteric viruses and enteric bacteria were used as biomarkers. Results showed that these enteric pathogens were significantly reduced from swine effluent during secondary settling process, and enteric viruses removal was correlated with the suspended solids decantation. The design of secondary settlers can be adapted to improve pathogens removal, by diminishing the solids loading rate per area and time, ending in higher hydraulic retention times. Copyright © 2016 Elsevier GmbH. All rights reserved.

Water Supply and Treatment Equipment

DTIC Science & Technology

2009-09-15

1 2 3 4 5 6 7 8 9 Always 2. Speaking ability (enunciation, volume, etc.) Poor 1 2 3 4 5 6 7 8 9 Excellent 3. Subject...knowledge Poor 1 2 3 4 5 6 7 8 9 Excellent 4. Treatment of students Discourteous 1 2 3 4 5 6 7 8 9 Courteous 5. Aware of

Settling equivalence of detrital minerals and grain-size dependence of sediment composition

NASA Astrophysics Data System (ADS)

Garzanti, Eduardo; Andò, Sergio; Vezzoli, Giovanni

2008-08-01

This study discusses the laws which govern sediment deposition, and consequently determine size-dependent compositional variability. A theoretical approach is substantiated by robust datasets on major Alpine, Himalayan, and African sedimentary systems. Integrated (bulk-petrography, heavy-mineral, X-ray powder diffraction) multiple-window analyses at 0.25ϕ to 0.50ϕ sieve interval of eighty-five fluvial, beach, and eolian-dune samples, ranging from very fine silt to coarse sand, document homologous intrasample compositional trends, revealed by systematic concentration of denser grains in finer-grained fractions (“size-density sorting”). These trends are explained by the settling-equivalence principle, stating that detrital minerals are deposited together if their settling velocity is the same. Settling of silt is chiefly resisted by fluid viscosity, and Stokes' law predicts that size differences between detrital minerals in ϕ units (“size shifts”) are half the difference between the logarithms of their submerged densities. Settling of pebbles is chiefly resisted by turbulence effects, and the Impact law predicts double size shifts than Stokes' law. Settling of sand is resisted by both viscosity and turbulence, the settling-equivalence formula is complex, and size shifts increase - with increasing settling velocity and grain size - from those predicted by Stokes' law to those predicted by the Impact law. In wind-laid sands, size shifts match those predicted by the Impact law; size-density sorting is thus greater than in water-laid fine sands. New analytical, graphical, and statistical techniques for rigorous settling-equivalence analysis of terrigenous sediments are illustrated. Deviations associated with non-spherical shape, density anomalies, inheritance from source rocks, or mixing of detrital species with contrasting provenance and different size distribution are also tentatively assessed. Such integrated theoretical and experimental approach allows us to mathematically predict intrasample compositional variability of water-laid and wind-laid sediments, once the density of detrital components is known.

The Effect of Low Energy Turbulence in Estuary Margins on Fine Sediment Settling

NASA Astrophysics Data System (ADS)

Allen, R. M.; MacVean, L. J.; Tse, I.; Mazzaro, L. J.; Stacey, M. T.; Variano, E. A.

2014-12-01

Sediment dynamics in estuaries and near shore regions control the growth or erosion of the bed and fringing wetlands, determine the spread of sediment-associated contaminants, and limit the light availability for primary productivity through turbidity. In estuaries such as San Francisco Bay, this sediment is often cohesive, and can flocculate. Changes to the composition of the sediment and waters, the suspended sediment concentration, and the turbulence can all affect the flocculation of suspended sediment. In turn, flocculation controls the particle diameter, settling velocity, density, and particle inertia. These sediment properties drive the turbulent diffusivity, which balances with the settling velocity to impact the vertical distribution of sediment in the water column. The vertical profile strongly affects how sediment is transported through the estuary by lateral flow. Turbulence may also impact settling velocity in non-cohesive particles. In turbulence, dense particles may get trapped in convergent flow regions, thus particles are more likely to get swept along the downward side of a turbulent eddy than the upward side, resulting in enhanced settling velocities. We isolated the impacts of turbulence level, particle size and type, and suspended sediment concentration on particle settling velocities using uniform grain size particles in homogeneous isotropic turbulence. Controlling the turbulence in a well-defined turbulence tank, we used Two Acoustic Doppler Velocimeters, separated vertically, to measure turbulent velocities (w') and suspended sediment concentrations (C), which yield condition dependent settling velocities (ws), via equation 1. Lab characterization of particle settling velocities help to validate the method for measuring settling velocities in the field, and will serve as a foundation for an extensive field experiment in San Francisco Bay. Characterizing the velocity enhancement relative to the Stokes number, the Rouse number, and the turbulent Reynolds number will enable more mechanistic predictions of sediment transport in low energy environments like protected estuary margins.

Estimation of settling velocity of sediment particles in estuarine and coastal waters

NASA Astrophysics Data System (ADS)

Nasiha, Hussain J.; Shanmugam, Palanisamy

2018-04-01

A model for estimating the settling velocity of sediment particles (spherical and non-spherical) in estuarine and coastal waters is developed and validated using experimental data. The model combines the physical, optical and hydrodynamic properties of the particles and medium to estimate the sediment settling velocity. The well-known Stokes law is broadened to account for the influencing factors of settling velocity such as particle size, shape and density. To derive the model parameters, laboratory experiments were conducted using natural flaky seashells, spherical beach sands and ball-milled seashell powders. Spectral light backscattering measurements of settling particles in a water tank were made showing a distinct optical feature with a peak shifting from 470-490 nm to 500-520 nm for particle populations from spherical to flaky grains. This significant optical feature was used as a proxy to make a shape determination in the present model. Other parameters experimentally determined included specific gravity (ΔSG) , Corey shape factor (CSF) , median grain diameter (D50) , drag coefficient (Cd) and Reynolds number (Re) . The CSF values considered ranged from 0.2 for flaky to 1.0 for perfectly spherical grains and Reynolds numbers from 2.0 to 105 for the laminar to turbulent flow regimes. The specific gravity of submerged particles was optically derived and used along with these parameters to estimate the sediment settling velocity. Comparison with the experiment data showed that the present model estimated settling velocities of spherical and non-spherical particles that were closely consistent with the measured values. Findings revealed that for a given D50, the flaky particles caused a greater decrease in settling velocity than the spherical particles which suggests that the particle shape factor has a profound role in influencing the sediment settling velocity and drag coefficients, especially in transitional and turbulent flow regimes. The present model can be easily adopted for various scientific and operational applications since the required parameters are readily measurable with the commercially available instrumentations.

Surface modification of strontium-doped porous bioactive ceramic scaffolds via poly(DOPA) coating and immobilizing silk fibroin for excellent angiogenic and osteogenic properties.

PubMed

Wang, Xu; Gu, Zhipeng; Jiang, Bo; Li, Li; Yu, Xixun

2016-04-01

For bioceramic scaffolds employed in clinical applications, excellent bioactivity and tenacity were of great importance. Modifying inorganic SCPP scaffolds with biological macromolecules could obviously improve its bioactivity and eliminate its palpable brittleness. However, it was hard to execute directly due to extremely bad interfacial compatibility between them. In this research, dopamine (DOPA) was introduced onto strontium-doped calcium polyphosphate (SCPP) scaffolds, subsequently the preliminary material was successfully further modified by silk fibroin (SF). SCPP/D/SF possessed suitable biomechanical properties, ability to stimulate angiogenic factor secretion and excellent biocompatibility. Biomechanical examination demonstrated that SCPP/D/SF scaffolds yielded better compressive strength because of improved interfacial compatibility. MTT assay and CLSM observation showed that SCPP/D/SF scaffolds had good cytocompatibility and presented better inducing-cell-migration potential than pure SCPP scaffolds. Meanwhile, its ability to stimulate angiogenic factor secretion was measured through the ELISA assay and immunohistological analysis in vitro and in vivo respectively. The results revealed, superior to SCPP, SCPP/D/SF could effectively promote VEGF and bFGF expression, possibly leading to enhancing angiogenesis and osteogenesis. In a word, SCPP/D/SF could serve as a potential bone tissue engineering scaffold for comparable biomechanical properties and excellent bioactivity. It provided a novel idea for modification of inorganic materials to prepare promising bone tissue engineering scaffolds with the ability to accelerate bone regeneration and vascularization.

Proceedings of the Annual Conference of the Military Testing Association (23rd) held at Arlington, Virginia, on 25-30 October 1981. Volume 1

DTIC Science & Technology

1981-01-01

instruction and type of task, and method of instruction and ability level were found with respect to school ... student . Methods of instruction that reduce the intellectual demand often reduce the differences between high and low ability students (Cronbach and...Snow, 1977). If these methods are applied to instruction of low ability students over a long period, many low ability students may equal or excel

Turbulent particle transport in streams: can exponential settling be reconciled with fluid mechanics?

PubMed

McNair, James N; Newbold, J Denis

2012-05-07

Most ecological studies of particle transport in streams that focus on fine particulate organic matter or benthic invertebrates use the Exponential Settling Model (ESM) to characterize the longitudinal pattern of particle settling on the bed. The ESM predicts that if particles are released into a stream, the proportion that have not yet settled will decline exponentially with transport time or distance and will be independent of the release elevation above the bed. To date, no credible basis in fluid mechanics has been established for this model, nor has it been rigorously tested against more-mechanistic alternative models. One alternative is the Local Exchange Model (LEM), which is a stochastic advection-diffusion model that includes both longitudinal and vertical spatial dimensions and is based on classical fluid mechanics. The LEM predicts that particle settling will be non-exponential in the near field but will become exponential in the far field, providing a new theoretical justification for far-field exponential settling that is based on plausible fluid mechanics. We review properties of the ESM and LEM and compare these with available empirical evidence. Most evidence supports the prediction of both models that settling will be exponential in the far field but contradicts the ESM's prediction that a single exponential distribution will hold for all transport times and distances. Copyright © 2012 Elsevier Ltd. All rights reserved.

Wave actions and topography determine the small-scale spatial distribution of newly settled Asari clams Ruditapes philippinarum on a tidal flat

NASA Astrophysics Data System (ADS)

Nambu, Ryogen; Saito, Hajime; Tanaka, Yoshio; Higano, Junya; Kuwahara, Hisami

2012-03-01

There are many studies on spatial distributions of Asari clam Ruditapes philippinarum adults on tidal flats but few have dealt with spatial distributions of newly settled Asari clam (<0.3 mm shell length, indicative of settlement patterns) in relation to physical/topographical conditions on tidal flats. We examined small-scale spatial distributions of newly settled individuals on the Matsunase tidal flat, central Japan, during the low spring tides on two days 29th-30th June 2007, together with the shear stress from waves and currents on the flat. The characteristics of spatial distribution of newly settled Asari clam markedly varied depending on both of hydrodynamic and topographical conditions on the tidal flat. Using generalized linear models (GLMs), factors responsible for affecting newly settled Asari clam density and its spatial distribution were distinguished between sampling days, with "crest" sites always having a negative influence each on the density and the distribution on both sampling days. The continuously recorded data for the wave-current flows at the "crest" site on the tidal flat showed that newly settled Asari clam, as well as bottom sediment particles, at the "crest" site to be easily displaced. Small-scale spatial distributions of newly settled Asari clam changed with more advanced benthic stages in relation to the wave shear stress.

MarsSedEx I: feasibility test for sediment settling experiments under Martian gravity

NASA Astrophysics Data System (ADS)

Kuhn, Nikolaus J.

2013-04-01

Gravity has a non-linear effect on the settling velocity of sediment particles in liquids and gases. However, StokeśLaw, the common way of estimating the terminal velocity of a particle moving in a gas of liquid assumes a linear relationship between terminal velocity and gravity. For terrestrial applications, this "error" is not relevant, but it may strongly influence the terminal velocity achieved by settling particles in the Martian atmosphere or water bodies. In principle, the effect of gravity on settling velocity can also be achieved by reducing the difference in density between particle and gas or liquid. However, the use of analogues simulating the lower gravity on Mars on Earth is difficult because the properties and interaction of the liquids and materials differ from those of water and sediment, .i.e. the viscosity of the liquid or the interaction between charges surfaces and liquid molecules. An alternative for measuring the actual settling velocities of particles under Martian gravity, on Earth, is offered by placing a settling tube on a reduced gravity flight and conduct settling tests within the 20 to 25 seconds of Martian gravity that can be simulated during such a flight. In this presentation we report on the feasibility of such a test based on an experiment conducted during a reduced gravity flight in November 2012.

76 FR 16646 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

...-Settled Foreign Currency Option Fees, in Section III of the Fee Schedule, with Singly Listed Options \\3...\\. The Exchange currently assesses fees for sector index options and U.S. Dollar-Settled foreign currency... U.S. Dollar-Settled Foreign Currency Option Fees.'' \\4\\ BKX represents the KBW Bank Index. \\5\\ RUT...

75 FR 56150 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

...-settled foreign currency options \\5\\ orders represented by Floor Brokers \\6\\ on the Exchange.\\7\\ The.... dollar-settled foreign currency options orders to the Exchange trading floor. \\5\\ U.S. dollar-settled foreign currency options traded on the Exchange are also known as World Currency Options (``WCO'') or...

Comparison of estimated and experimental subaqueous seed transport.

Treesearch

Scott Markwith; David Leigh

2011-01-01

We compare the estimates from the relative bed stability (RBS) equation that indicates incipient bed movement, and the inertial settling (‘Impact’) law and Wu and Wang (2006) settling velocity equations that indicate suspended particle movement, to flume and settling velocity observations to confirm the utility of the equations for subaqueous hydrochory analyses, and...

Hydraulic evolution of high-density turbidity currents from the Brushy Canyon Formation, Eddy County, New Mexico inferred by comparison to settling and sorting experiments

NASA Astrophysics Data System (ADS)

Motanated, Kannipa; Tice, Michael M.

2016-05-01

Hydraulic transformations in turbidity currents are commonly driven by or reflected in changes in suspended sediment concentrations, but changes preceding transformations can be difficult to diagnose because they do not produce qualitative changes in resultant deposits. This study integrates particle settling experiments and in situ detection of hydraulically contrasting particles in turbidites in order to infer changes in suspended sediment concentration during deposition of massive (Bouma Ta) sandstone divisions. Because grains of contrasting density are differentially sorted during hindered settling from dense suspensions, relative grading patterns can be used to estimate suspended sediment concentrations and interpret hydraulic evolution of the depositing turbidity currents. Differential settling of dense particles (aluminum ballotini) through suspensions of hydraulically coarser light particles (silica ballotini) with volumetric concentration, Cv, were studied in a thin vessel by using particle-image-velocimetry. At high Cv, aluminum particles were less retarded than co-sedimenting silica particles, and effectively settled as hydraulically coarser grains. This was because particles were entrained into clusters dominated by the settling behavior of the silica particles. Terminal settling velocities of both particles converged at Cv ≥ 25%, and particle sorting was diminished. The results of settling experiments were applied to understand settling of analogous feldspar and zircon grains in natural turbidity flows. Distributions of light and heavy mineral grains in massive sandstones, Bouma Ta divisions, of turbidites from the Middle Permian Brushy Canyon Formation were observed in situ by X-ray fluorescence microscopy (μXRF). Hydraulic sorting of these grains resulted in characteristic patterns of zirconium abundance that decreased from base to top within Ta divisions. These profiles resulted from upward fining of zircon grains with respect to co-occurring feldspar grains. Although calculated settling velocity distributions for zircon grains in structureless sandstones were slower than those for feldspar grains at infinite dilution, calculated settling velocity distributions for zircon and feldspar grains in overlying black siltstone layers were identical. This evidence suggests that these sandstone divisions were deposited from hyperconcentrated suspensions where particle segregation was diminished and hydraulically fine grains were entrained with hydraulically coarse particles. Hydraulic fining of zircon grains during deposition implies that the suspended sediment concentration at the bases of turbidity currents increased even as the overall current evolved toward lower density as reflected by cessation of Ta deposition and by hydraulic equivalence of zircon and feldspar grains in overlying low-density turbiditic siltstones. This evolution likely resulted from volumetric collapse of the turbidity currents.

Variation in the total lengths of abutment/implant assemblies generated with a function of applied tightening torque in external and internal implant-abutment connection.

PubMed

Kim, Ki-Seong; Lim, Young-Jun; Kim, Myung-Joo; Kwon, Ho-Beom; Yang, Jae-Ho; Lee, Jai-Bong; Yim, Soon-Ho

2011-08-01

Settling (embedment relaxation), which is the main cause for screw loosening, is developed by microroughness between implant and abutment metal surface. The objective of this study was to evaluate and compare the relationship between the level of applied torque and the settling of abutments into implants in external and internal implant-abutment connection. Five different implant-abutment connections were used (Ext, External butt joint + two-piece abutment; Int-H2, Internal hexagon + two-piece abutment; Int-H1, Internal hexagon + one-piece abutment; Int-O2, Internal octagon + two-piece abutment; Int-O1, Internal octagon + one-piece abutment). All abutments of each group were assembled and tightened with corresponding implants by a digital torque gauge. The total lengths of implant-abutment samples were measured at each torque (5, 10, 30 N cm and repeated 30 N cm with 10-min interval) by an electronic digital micrometer. The settling values were calculated by changes between the total lengths of implant-abutment samples. All groups developed settling with repeated tightening. The Int-H2 group showed markedly higher settling for all instances of tightening torque and the Ext group was the lowest. Statistically significant differences were found in settling values between the groups and statistically significant increases were observed within each group at different tightening torques (P<0.05). After the second tightening of 30 N cm, repeated tightening showed almost constant settling values. Results from the present study suggested that to minimize the settling effect, abutment screws should be retightened at least twice at 30 N cm torque at a 10-min interval in all laboratory and clinical procedures. © 2010 John Wiley & Sons A/S.

Multiphase flow modelling of volcanic ash particle settling in water using adaptive unstructured meshes

NASA Astrophysics Data System (ADS)

Jacobs, C. T.; Collins, G. S.; Piggott, M. D.; Kramer, S. C.; Wilson, C. R. G.

2013-02-01

Small-scale experiments of volcanic ash particle settling in water have demonstrated that ash particles can either settle slowly and individually, or rapidly and collectively as a gravitationally unstable ash-laden plume. This has important implications for the emplacement of tephra deposits on the seabed. Numerical modelling has the potential to extend the results of laboratory experiments to larger scales and explore the conditions under which plumes may form and persist, but many existing models are computationally restricted by the fixed mesh approaches that they employ. In contrast, this paper presents a new multiphase flow model that uses an adaptive unstructured mesh approach. As a simulation progresses, the mesh is optimized to focus numerical resolution in areas important to the dynamics and decrease it where it is not needed, thereby potentially reducing computational requirements. Model verification is performed using the method of manufactured solutions, which shows the correct solution convergence rates. Model validation and application considers 2-D simulations of plume formation in a water tank which replicate published laboratory experiments. The numerically predicted settling velocities for both individual particles and plumes, as well as instability behaviour, agree well with experimental data and observations. Plume settling is clearly hindered by the presence of a salinity gradient, and its influence must therefore be taken into account when considering particles in bodies of saline water. Furthermore, individual particles settle in the laminar flow regime while plume settling is shown (by plume Reynolds numbers greater than unity) to be in the turbulent flow regime, which has a significant impact on entrainment and settling rates. Mesh adaptivity maintains solution accuracy while providing a substantial reduction in computational requirements when compared to the same simulation performed using a fixed mesh, highlighting the benefits of an adaptive unstructured mesh approach.

A test of the ADV-based Reynolds flux method for in situ estimation of sediment settling velocity in a muddy estuary

NASA Astrophysics Data System (ADS)

Cartwright, Grace M.; Friedrichs, Carl T.; Smith, S. Jarrell

2013-12-01

Under conditions common in muddy coastal and estuarine environments, acoustic Doppler velocimeters (ADVs) can serve to estimate sediment settling velocity ( w s) by assuming a balance between upward turbulent Reynolds flux and downward gravitational settling. Advantages of this method include simple instrument deployment, lack of flow disturbance, and relative insensitivity to biofouling and water column stratification. Although this method is being used with increasing frequency in coastal and estuarine environments, to date it has received little direct ground truthing. This study compared in situ estimates of w s inferred by a 5-MHz ADV to independent in situ observations from a high-definition video settling column over the course of a flood tide in the bottom boundary layer of the York River estuary, Virginia, USA. The ADV-based measurements were found to agree with those of the settling column when the current speed at about 40 cm above the bed was greater than about 20 cm/s. This corresponded to periods when the estimated magnitude of the settling term in the suspended sediment continuity equation was four or more times larger than the time rate of change of concentration. For ADV observations restricted to these conditions, ADV-based estimates of w s (mean 0.48±0.04 mm/s) were highly consistent with those observed by the settling column (mean 0.45±0.02 mm/s). However, the ADV-based method for estimating w s was sensitive to the prescribed concentration of the non-settling washload, C wash. In an objective operational definition, C wash can be set equal to the lowest suspended solids concentration observed around slack water.

Spindle epithelial tumor with thymus-like differentiation of the thyroid in a 70-year-old man.

PubMed

Lee, Sunhye; Kim, Yon Seon; Lee, Jeong Hyeon; Hwang, Sung Ho; Oh, Yu-Hwan; Ko, Byung Kyun; Ham, Soo-Youn

2018-06-01

Spindle epithelial tumor with thymus-like differentiation (SETTLE) is a very rare tumor of the thyroid gland mostly occurring in young patients. The imaging findings of SETTLE tumors are yet to be defined. However, they are usually described as well-defined heterogeneously enhanced masses on CT scan. The current case has the potential growth as compared with a 2009 chest radiography. We took into account the possibility of SETTLE in the case of a bulky mass in patients over 70 years old, particularly in the lower neck. Herein, we report a case of the oldest patient so far. The patient underwent a right lobectomy of the thyroid and mass excision. Follow-up CT scans after 6 months revealed no local recurrence. Surgery is the gold standard treatment for SETTLE. Chemotherapy and radiotherapy could be another possible option for patients with advanced stage SETTLE.

Settling velocity of microplastic particles of regular shapes.

PubMed

Khatmullina, Liliya; Isachenko, Igor

2017-01-30

Terminal settling velocity of around 600 microplastic particles, ranging from 0.5 to 5mm, of three regular shapes was measured in a series of sink experiments: Polycaprolactone (material density 1131kgm -3 ) spheres and short cylinders with equal dimensions, and long cylinders cut from fishing lines (1130-1168kgm -3 ) of different diameters (0.15-0.71mm). Settling velocities ranging from 5 to 127mms -1 were compared with several semi-empirical predictions developed for natural sediments showing reasonable consistency with observations except for the case of long cylinders, for which the new approximation is proposed. The effect of particle's shape on its settling velocity is highlighted, indicating the need of further experiments with real marine microplastics of different shapes and the necessity of the development of reasonable parameterization of microplastics settling for proper modeling of their transport in the water column. Copyright © 2016 Elsevier Ltd. All rights reserved.

Flocculent Settling of Food Wastes.

PubMed

Chowdhury, Mohammad Monirul Islam; Kim, Mingu; Haroun, Basem Mikhaeil; Nakhla, George; Keleman, Michael

2016-07-01

This study evaluated the flocculent settling in water and municipal wastewater (MWW) in a 10.6 ft deep column. A total of eight runs at three different testing conditions involving MWW alone, food waste (FW) alone, and FW in MWW (FW+MWW) were conducted. Total suspended solid (TSS), total BOD (TBOD), total COD (TCOD), total nitrogen (TN), and total phosphorous (TP) removal efficiencies after 3 hours of settling were 62%, 46%, 49%, 46% and 62% for FW, and 50%, 43%, 39%, 37% and 24% for MWW. Removal efficiencies of particulate COD (PCOD) and particulate BOD (PBOD) at the lowest surface overflow rate (SOR) of 1.1 m3/m2/hr corresponding to the longest settling time of 3 hours were 59% and 64% for FW, and 65% and 70% for FW with MWW samples. On the other hand, no significant variation between FW and FW with MWW was observed for PN removal after 3 hours of settling.

A phenomenological retention tank model using settling velocity distributions.

PubMed

Maruejouls, T; Vanrolleghem, P A; Pelletier, G; Lessard, P

2012-12-15

Many authors have observed the influence of the settling velocity distribution on the sedimentation process in retention tanks. However, the pollutants' behaviour in such tanks is not well characterized, especially with respect to their settling velocity distribution. This paper presents a phenomenological modelling study dealing with the way by which the settling velocity distribution of particles in combined sewage changes between entering and leaving an off-line retention tank. The work starts from a previously published model (Lessard and Beck, 1991) which is first implemented in a wastewater management modelling software, to be then tested with full-scale field data for the first time. Next, its performance is improved by integrating the particle settling velocity distribution and adding a description of the resuspension due to pumping for emptying the tank. Finally, the potential of the improved model is demonstrated by comparing the results for one more rain event. Copyright © 2011 Elsevier Ltd. All rights reserved.

Dynamic modeling of sludge compaction and consolidation processes in wastewater secondary settling tanks.

PubMed

Abusam, A; Keesman, K J

2009-01-01

The double exponential settling model is the widely accepted model for wastewater secondary settling tanks. However, this model does not estimate accurately solids concentrations in the settler underflow stream, mainly because sludge compression and consolidation processes are not considered. In activated sludge systems, accurate estimation of the solids in the underflow stream will facilitate the calibration process and can lead to correct estimates of particularly kinetic parameters related to biomass growth. Using principles of compaction and consolidation, as in soil mechanics, a dynamic model of the sludge consolidation processes taking place in the secondary settling tanks is developed and incorporated to the commonly used double exponential settling model. The modified double exponential model is calibrated and validated using data obtained from a full-scale wastewater treatment plant. Good agreement between predicted and measured data confirmed the validity of the modified model.

Capturing Flow-weighted Water and Suspended Particulates from Agricultural Canals During Drainage Events.

PubMed

Bhadha, Jehangir H; Sexton, Anne; Lang, Timothy A; Daroub, Samira H

2017-11-07

The purpose of this study is to describe the methods used to capture flow-weighted water and suspended particulates from farm canals during drainage discharge events. Farm canals can be enriched by nutrients such as phosphorus (P) that are susceptible to transport. Phosphorus in the form of suspended particulates can significantly contribute to the overall P loads in drainage water. A settling tank experiment was conducted to capture suspended particulates during discrete drainage events. Farm canal discharge water was collected in a series of two 200 L settling tanks over the entire duration of the drainage event, so as to represent a composite subsample of the water being discharged. Imhoff settling cones are ultimately used to settle out the suspended particulates. This is achieved by siphoning water from the settling tanks via the cones. The particulates are then collected for physico-chemical analyses.

Particle Settling in Low Energy Turbulence

NASA Astrophysics Data System (ADS)

Allen, Rachel; MacVean, Lissa; Tse, Ian; Mazzaro, Laura; Stacey, Mark; Variano, Evan

2014-11-01

Particle settling velocities can be altered by turbulence. In turbulence, dense particles may get trapped in convergent flow regions, and falling particles may be swept towards the downward side of turbulent eddies, resulting in enhanced settling velocities. The degree of velocity enhancement may depend on the Stokes number, the Rouse number, and the turbulent Reynolds number. In a homogeneous, isotropic turbulence tank, we tested the effects of particle size and type, suspended sediment concentration, and level of turbulence on the settling velocities of particles typically found in muddy estuaries. Two Acoustic Doppler Velocimeters (ADVs), separated vertically, measured turbulent velocities and suspended sediment concentrations, which yield condition dependent settling velocities, via ∂/á C ñ ∂ t = -∂/∂ z (ws á C ñ + á w ' C ' ñ) . These results are pertinent to fine sediment transport in estuaries, where high concentrations of suspended material are transported and impacted by low energy turbulence.

Substratum location and zoospore behaviour in the fouling alga Enteromorpha.

PubMed

Callow, M E; Callow, J A

2000-01-01

The green alga Enteromorpha is the most important macroalga that fouls ships, submarines and underwater structures. Major factors in its success in colonising new substrata are the production of enormous numbers of swimming spores and their ability to locate surfaces on which to settle. Factors facilitating the settlement and adhesion of asexual zoospores are examined in this article. Settlement and adhesion may be regulated by topographical, biological, chemical and physico-chemical cues, all of which are modified by the presence of microbial biofilm. The level of gregarious zoospore settlement is related to spore density and may be mediated by a number of external cues including fatty acids and 'detritus'.

Career Adapt-Abilities Scale--Brazilian Form: Psychometric Properties and Relationships to Personality

ERIC Educational Resources Information Center

Teixeira, Marco Antonio Pereira; Bardagi, Marucia Patta; Lassance, Maria Celia Pacheco; Magalhaes, Mauro de Oliveira; Duarte, Maria Eduarda

2012-01-01

The Career Adapt-Abilities Scale--Brazilian Form (CAASBrazil) consists of four scales which measure concern, control, curiosity, and confidence as psychosocial resources for managing occupational transitions, developmental tasks, and work traumas. Internal consistency estimates for the subscale and total scores ranged from good to excellent. The…

Attributes of School Leaders Towards Achieving Sustainable Leadership: A Factor Analysis

ERIC Educational Resources Information Center

Goolamally, Norlia; Ahmad, Jamil

2014-01-01

A principal plays a very important role in deciding the direction and success of a school. Whether a school is dynamic is dependent upon the skills and abilities of the principal. In order to be excellent, the principal must be in possession of an excellent character. Therefore, the selection and promotion of school principals should be conducted…

Developing Excellent School Principals to Advance Teaching and Learning: Considerations for State Policy

ERIC Educational Resources Information Center

Manna, Paul

2015-01-01

Principals who are strong, effective, responsive leaders help to inspire and enhance the abilities of their teachers and other school staff to do excellent work. Such principals also tend to retain great teachers and create opportunities for them to take on new leadership roles. This leads to the following key question: What can state policymakers…

Exploration of the Consortium on Reading Excellence Phonics Survey: An Instrument for Assessing Primary-Grade Students' Phonics Knowledge

ERIC Educational Resources Information Center

Reutzel, D. Ray; Brandt, Lorilynn; Fawson, Parker C.; Jones, Cindy D.

2014-01-01

This article examines the Consortium on Reading Excellence-Phonics Survey (CORE-PS), an informal, inexpensive, and widely disseminated assessment tool that is used to determine primary-grade students' knowledge of and abilities to apply key alphabetic and phonics understandings to decode a mix of real and pseudo-words. Evidence is reported of the…

Gervais High School: 100% Committed to Excellence

ERIC Educational Resources Information Center

Principal Leadership, 2013

2013-01-01

Gervais High School--with a senior class of 80 and a total enrollment of 337--may be small in size compared to its neighbors, but it has demonstrated over the last four years the ability to think big in pursuit of excellence. A decade ago, Gervais had a well-earned reputation in Oregon's Willamette Valley as a drug-ridden, gang-infested school…

Flocculation and Settling Velocity Estimates for Reservoir Sedimentation Analysis

DTIC Science & Technology

2016-02-01

viscosity ). Stokes’ law is commonly used to describe settling velocity of a single particle and is applicable when the particle Reynolds number (Rep...fluid viscosity , and ν is kinematic viscosity . Several researchers recognize that large, fast-settling particles disobey the laminar boundary...interparticle attraction caused by electrostatic and physiochemical forces. These properties give clays their stickiness and control essential

Separating liquid and solid products of liquefaction of coal or like carbonaceous materials

DOEpatents

Malek, John M.

1979-06-26

Slurryform products of coal liquefaction are treated with caustic soda in presence of H.sub.2 O in an inline static mixer and then the treated product is separated into a solids fraction and liquid fractions, including liquid hydrocarbons, by gravity settling preferably effected in a multiplate settling separator with a plurality of settling spacings.

Investigating the settling dynamics of cohesive silt particles with particle-resolving simulations

NASA Astrophysics Data System (ADS)

Sun, Rui; Xiao, Heng; Sun, Honglei

2018-01-01

The settling of cohesive sediment is ubiquitous in aquatic environments, and the study of the settling process is important for both engineering and environmental reasons. In the settling process, the silt particles show behaviors that are different from non-cohesive particles due to the influence of inter-particle cohesive force. For instance, the flocs formed in the settling process of cohesive silt can loosen the packing, and thus the structural densities of cohesive silt beds are much smaller than that of non-cohesive sand beds. While there is a consensus that cohesive behaviors depend on the characteristics of sediment particles (e.g., Bond number, particle size distribution), little is known about the exact influence of these characteristics on the cohesive behaviors. In addition, since the cohesive behaviors of the silt are caused by the inter-particle cohesive forces, the motions of and the contacts among silt particles should be resolved to study these cohesive behaviors in the settling process. However, studies of the cohesive behaviors of silt particles in the settling process based on particle-resolving approach are still lacking. In the present work, three-dimensional settling process is investigated numerically by using CFD-DEM (Computational Fluid Dynamics-Discrete Element Method). The inter-particle collision force, the van der Waals force, and the fluid-particle interaction forces are considered. The numerical model is used to simulate the hindered settling process of silt based on the experimental setup in the literature. The results obtained in the simulations, including the structural densities of the beds, the characteristic lines, and the particle terminal velocity, are in good agreement with the experimental observations in the literature. To the authors' knowledge, this is the first time that the influences of non-dimensional Bond number and particle polydispersity on the structural densities of silt beds have been investigated separately. The results demonstrate that the cohesive behavior of silt in the settling process is attributed to both the cohesion among silt particles themselves and the particle polydispersity. To guide to the macro-scale modeling of cohesive silt sedimentation, the collision frequency functions obtained in the numerical simulations are also presented based on the micromechanics of particles. The results obtained by using CFD-DEM indicate that the binary collision theory over-estimated the particle collision frequency in the flocculation process at high solid volume fraction.

Effects on ground-water quality of seepage from a phosphatic clayey waste settling pond, north-central Florida

USGS Publications Warehouse

Hunn, J.D.; Seaber, P.R.

1986-01-01

Water samples were taken from test wells drilled near an inactive phosphatic clayey waste storage settling pond, from the settling pond and its perimeter ditch, and from an active settling pond near White Springs, Hamilton County, in north-central Florida. The purpose was to document the seepage of chemical constituents from the inactive settling pond and ditch into the adjacent surficial groundwater system, and to assess the potential for movement of these constituents into the deeper Floridan aquifer system which is the major source of public supply in the area. The study area is underlain by a 2 ,500-ft-thick sequence of Coastal Plain sediments of Early Cretaceous to Holocene age. The rocks of Tertiary and Quaternary age that underlie the test site area can be grouped into three major geohydrologic units. In descending order, these units are: surficial aquifer, Hawthorn confining unit, and Floridan aquifer system. Phosphate deposits occur in the upper part of the surficial aquifer. Water in the active settling pond is a calcium magnesium sulfate type with a dissolved solids concentration of 250 mg/L, containing greater amounts of phosphorus, iron, aluminum, barium, zinc, and chromium than the other surface waters. Water in the perimeter ditch is a calcium sulfate type with a dissolved solids concentration of 360 to 390 mg/L, containing greater amounts of calcium, sulfate, nitrogen, and fluoride than other surface waters. Water from the inactive settling pond is a calcium magnesium bicarbonate type with a dissolved solids concentration of 140 mg/L, containing more bicarbonate than the other surface waters. Large amounts of chemical constituents in the phosphate waste disposal slurry are apparently trapped in the sediments of the settling ponds. The quality of water in the upper part of the surficial aquifer from wells within 200 to 400 ft of the inactive settling pond shows no signs of chemical contamination from phosphate industry operations. The horizontal groundwater velocity calculated for this aquifer between the ditch surrounding the settling pond and the test wells is between 100 to 2,000 ft/year, which is enough time for water to have reached the test wells in the 6 years the pond has been operating. (Author 's abstract)

Flow and suspended-sand behavior in large rivers after dredging.

NASA Astrophysics Data System (ADS)

Yuill, B. T.; Wang, Y.; Allison, M. A.; Meselhe, E. A.

2017-12-01

Dredging is commonly used in large rivers to promote navigation and provide sediment for engineering projects. Channel bars typically have thicker, coarser sediment deposits than elsewhere on the channel bed and are often the focus of dredging projects. Bar dredging may create deep pits ("borrow pits") that significantly alter flow and sediment transport. Locally, the pit acts as a large bedform, contracting and expanding the flow field and enhancing turbulence. At the reach scale, the pit acts as a new sediment sink and disrupts the sediment budget which may have consequences for channel stability and aquatic ecosystem health. In this study, we focus on the local impact of the borrow pit and how it, similar to dunes, creates a turbulent wake within the downstream flow column. We hypothesize that this wake may have implications for the overlapping suspended-sediment transport fields. Efficient dredging operations requires the ability to predict channel infilling/recovery timescales and in large, sandy rivers, a substantial fraction of the sediment infilling results from the settling of suspended sediment. However, if the turbulent wake significantly alters pathways of sediment settling within the borrow pit, typical models of sediment deposition that do not account for the wake effects may not apply. To explore this problem, we use numerical modelling to predict sand behavior with and without resolving the effects of wake turbulence. Wake turbulence is resolved using detached-eddy simulation and sand settling is simulated using Lagrangian particle tracking. Our study area is a >1 km2 channel bar in the lower Mississippi River, which was dredged in October 2016. We used vessel-based measurements (MBES, ADCP) to characterize the post-dredge hydrodynamic environment. Study results indicate that the turbulent wake significantly impacted suspended-sand behavior as it entered the borrow pit and large eddies increased the vertical grain velocities, mean grain settling was reduced, and initial sediment deposition was reduced by up to 20%. Study results may be used to optimize dredging in a manner to reduce channel recovery time. In coastal environments, dredged sand is becoming an increasingly precious commodity, useful for construction as well as restoration purposes such as delta land building and beach nourishment.

A Laboratory Investigation of the Suspension, Transport, and Settling of Silver Carp Eggs Using Synthetic Surrogates

PubMed Central

Garcia, Tatiana; Zuniga Zamalloa, Carlo; Jackson, P. Ryan; Murphy, Elizabeth A.; Garcia, Marcelo H.

2015-01-01

Asian carp eggs are semi-buoyant and must remain suspended in the water to survive, supported by the turbulence of the flow, until they hatch and develop the ability to swim. Analysis of the transport and dispersal patterns of Asian carp eggs will facilitate the development and implementation of control strategies to target the early life stages. Experimenting with Asian carp eggs is complicated due to practical issues of obtaining eggs in close proximity to experimental facilities and extensive handling of eggs tends to damage them. Herein, we describe laboratory experiments using styrene beads (4.85 mm diameter) as synthetic surrogate eggs to mimic the physical properties of water-hardened silver carp eggs. The first set of experiments was completed in a rectangular vertical column filled with salt water. The salinity of the water was adjusted in an iterative fashion to obtain a close approximation of the fall velocity of the styrene beads to the mean fall velocity of silver carp water-hardened eggs. The terminal fall velocity of synthetic eggs was measured using an image processing method. The second set of experiments was performed in a temperature-controlled recirculatory flume with a sediment bed. The flume was filled with salt water, and synthetic eggs were allowed to drift under different flow conditions. Drifting behavior, suspension conditions, and settling characteristics of synthetic eggs were observed. At high velocities, eggs were suspended and distributed through the water column. Eggs that touched the sediment bed were re-entrained by the flow. Eggs saltated when they touched the bed, especially at moderate velocities and with a relatively flat bed. At lower velocities, some settling of the eggs was observed. With lower velocities and a flat bed, eggs were trapped near the walls of the flume. When bedforms were present, eggs were trapped in the lee of the bedforms in addition to being trapped near the flume walls. Results of this research study provide insights about transport, suspension, and dispersion of silver carp eggs. The knowledge gained from this study is useful to characterize the critical hydrodynamic conditions of the flow at which surrogates for silver carp water-hardened eggs settle out of suspension, and provides insight into how eggs may interact with riverbed sediments and morphology. PMID:26713855

A laboratory investigation of the suspension, transport, and settling of silver carp eggs using synthetic surrogates

USGS Publications Warehouse

Garcia, Tatiana; Zuniga Zamalloa, Carlo; Jackson, P. Ryan; Murphy, Elizabeth A.; Garcia, Marcelo H.

2015-01-01

Asian carp eggs are semi-buoyant and must remain suspended in the water to survive, supported by the turbulence of the flow, until they hatch and develop the ability to swim. Analysis of the transport and dispersal patterns of Asian carp eggs will facilitate the development and implementation of control strategies to target the early life stages. Experimenting with Asian carp eggs is complicated due to practical issues of obtaining eggs in close proximity to experimental facilities and extensive handling of eggs tends to damage them. Herein, we describe laboratory experiments using styrene beads (4.85 mm diameter) as synthetic surrogate eggs to mimic the physical properties of water-hardened silver carp eggs. The first set of experiments was completed in a rectangular vertical column filled with salt water. The salinity of the water was adjusted in an iterative fashion to obtain a close approximation of the fall velocity of the styrene beads to the mean fall velocity of silver carp water-hardened eggs. The terminal fall velocity of synthetic eggs was measured using an image processing method. The second set of experiments was performed in a temperature-controlled recirculatory flume with a sediment bed. The flume was filled with salt water, and synthetic eggs were allowed to drift under different flow conditions. Drifting behavior, suspension conditions, and settling characteristics of synthetic eggs were observed. At high velocities, eggs were suspended and distributed through the water column. Eggs that touched the sediment bed were re-entrained by the flow. Eggs saltated when they touched the bed, especially at moderate velocities and with a relatively flat bed. At lower velocities, some settling of the eggs was observed. With lower velocities and a flat bed, eggs were trapped near the walls of the flume. When bedforms were present, eggs were trapped in the lee of the bedforms in addition to being trapped near the flume walls. Results of this research study provide insights about transport, suspension, and dispersion of silver carp eggs. The knowledge gained from this study is useful to characterize the critical hydrodynamic conditions of the flow at which surrogates for silver carp water-hardened eggs settle out of suspension, and provides insight into how eggs may interact with riverbed sediments and morphology.

Characteristics of aerobic granules grown on glucose and acetate in sequential aerobic sludge blanket reactors.

PubMed

Tay, J H; Liu, Q S; Liu, Y

2002-08-01

Aerobic granules were cultivated in two column-type sequential aerobic sludge blanket reactors fed with glucose and acetate, respectively. The characteristics of aerobic granules were investigated. Results indicated that the glucose- and acetate-fed granules have comparable characteristics in terms of settling velocity, size, shape, biomass density, hydrophobicity, physical strength, microbial activity and storage stability. Substrate component does not seem to be a key factor on the formation of aerobic granules. However, microbial diversity of the granules is closely associated with the carbon sources supplied to the reactors. Compared with the conventional activated sludge flocs, aerobic granules exhibit excellent physical characteristics that would be essential for industrial application. This research provides a complete set of characteristics data of aerobic granules grown on glucose and acetate, which would be useful for further development of aerobic granules-based compact bioreactor for handling high strength organic wastewater.

Processing Of Neem And Jatropha Methyl Esters -Alternative Fuels From Vegetable Oil

NASA Astrophysics Data System (ADS)

Ramasubramanian, S.; Manavalan, S.; Gnanavel, C.; Balakrishnan, G.

2017-03-01

Biodiesel is an alternative fuel for diesel engine. The methyl esters of vegetable oils, known as biodiesel are becoming increasingly popular because of their low environmental impact and potential as a green alternative fuel for diesel engine. This paper deals with the manufacturing process of Biodiesel from jatropha and neem oil. Biodiesel was prepared from neem oil and jatropha oil, the transestrified having kinematic viscosity of 3 & 2.6 centistokes, methanol ratio is 6:1 & 5.1respectively. The secondary solution is preheated at 65 C & 60 C and reaction temperature is maintained at 60C & 55 C and reaction time is 60 minutes approximately with NaOH catalyst and low viscosity oil is allowed to settle 24 hours. The average yield of neem and jatropha methyl esters was about 85%. These methyl esters shows excellent alternative under optimum condition for fossil fuels.

Evaluation of flow quality in two large NASA wind tunnels at transonic speeds

NASA Technical Reports Server (NTRS)

Harvey, W. D.; Stainback, P. C.; Owen, F. K.

1980-01-01

Wind tunnel testing of low drag airfoils and basic transition studies at transonic speeds are designed to provide high quality aerodynamic data at high Reynolds numbers. This requires that the flow quality in facilities used for such research be excellent. To obtain a better understanding of the characteristics of facility disturbances and identification of their sources for possible facility modification, detailed flow quality measurements were made in two prospective NASA wind tunnels. Experimental results are presented of an extensive and systematic flow quality study of the settling chamber, test section, and diffuser in the Langley 8 foot transonic pressure tunnel and the Ames 12 foot pressure wind tunnel. Results indicate that the free stream velocity and pressure fluctuation levels in both facilities are low at subsonic speeds and are so high as to make it difficult to conduct meaningful boundary layer control and transition studies at transonic speeds.

Habitat preference and the marine-speciation paradox.

PubMed Central

Bierne, Nicolas; Bonhomme, François; David, Patrice

2003-01-01

Marine organisms challenge the classical theories of local adaptation and speciation because their planktonic larvae have the potential to maintain high gene flow. The marine-speciation paradox is illustrated by contact zones between incipient species that are so large that allopatric divergence seems unlikely. For this reason any mechanism preventing sympatric larvae of two incipient species from coexisting in the same habitats can be a powerful promoter of speciation. The contact zone between two hybridizing taxa of mussel, Mytilus edulis and M. galloprovincialis, in Europe provides an excellent example. Although the zone itself extends over thousands of kilometres, the opportunities for interbreeding are considerably reduced by the small-scale mosaic structure of the zone, where local patches of each taxon alternate at scales of kilometres or less, in response to locally variable ecological factors. Habitat choice by settling larvae would be a less costly mechanism than post-settlement selection to maintain such a mosaic structure. Unfortunately the role of selective settlement has remained hypothetical because larvae could not be scored by classical genetic markers. PCR markers allowed us to study larvae and settlement in ecologically contrasting sites within the zone. We show that only a subset of the genotypes present in the plankton settle in some sites, and that the adults on these sites show the same genetic bias. Genetically based variation in pre-settlement processes therefore accounts for the ecological segregation observed, though it is not the only factor involved in limiting successful interbreeding. The present dataset also supports previous reports of partial spawning asynchrony. PMID:12965032

Work ability score and future work ability as predictors of register-based disability pension and long-term sickness absence: A three-year follow-up study.

PubMed

Kinnunen, Ulla; Nätti, Jouko

2018-05-01

We investigated two single items of the Work Ability Index - work ability score, and future work ability - as predictors of register-based disability pension and long-term sickness absence over a three-year follow-up. Survey responses of 11,131 Finnish employees were linked to pension and long-term (more than 10 days) sickness absence register data by Statistics Finland. Work ability score was divided into poor (0-5), moderate (6-7) and good/excellent (8-10) and future work ability into poor (1-2) and good (3) work ability at baseline. Cox proportional hazard regressions were used in the analysis of disability pension, and a negative binomial model in the analysis of long-term sickness absence. The results were adjusted for several background, work- and health-related covariates. Compared with those with good/excellent work ability scores, the hazard ratios of disability pension after adjusting for all covariates were 9.84 (95% CI 6.68-14.49) for poor and 2.25 (CI 95% 1.51-3.35) for moderate work ability score. For future work ability, the hazard ratio was 8.19 (95% CI 4.71-14.23) among those with poor future work ability. The incidence rate ratios of accumulated long-term sickness absence days were 3.08 (95% CI 2.19-4.32) and 1.59 (95% CI 1.32-1.92) for poor and moderate work ability scores, and 1.51 (95% CI 0.97-2.36) for poor future work ability. The single items of work ability score and future work ability predicted register-based disability pension equally well, but work ability score was a better predictor of register-based long-term sickness absence days than future work ability in a three-year follow-up. Both items seem to be of use especially when examining the risk of poor work ability for disability but also for long sick leave.

Settling into an increasingly hostile world: the rapidly closing "recruitment window" for corals.

PubMed

Arnold, Suzanne N; Steneck, Robert S

2011-01-01

Free space is necessary for larval recruitment in all marine benthic communities. Settling corals, with limited energy to invest in competitive interactions, are particularly vulnerable during settlement into well-developed coral reef communities. This situation may be exacerbated for corals settling into coral-depauperate reefs where succession in nursery microhabitats moves rapidly toward heterotrophic organisms inhospitable to settling corals. To study effects of benthic organisms (at millimeter to centimeter scales) on newly settled corals and their survivorship we deployed terra-cotta coral settlement plates at 10 m depth on the Mesoamerican Barrier Reef in Belize and monitored them for 38 mo. During the second and third years, annual recruitment rates declined by over 50% from the previous year. Invertebrate crusts (primarily sponges) were absent at the start of the experiment but increased in abundance annually from 39, 60, to 73% of the plate undersides by year three. Subsequently, substrates hospitable to coral recruitment, including crustose coralline algae, biofilmed terra-cotta and polychaete tubes, declined. With succession, substrates upon which spat settled shifted toward organisms inimical to survivorship. Over 50% of spat mortality was due to overgrowth by sponges alone. This result suggests that when a disturbance creates primary substrate a "recruitment window" for settling corals exists from approximately 9 to 14 mo following the disturbance. During the window, early-succession, facilitating species are most abundant. The window closes as organisms hostile to coral settlement and survivorship overgrow nursery microhabitats.

Experimental investigation of gravity effects on sediment sorting on Mars

NASA Astrophysics Data System (ADS)

Kuhn, Nikolaus J.; Kuhn, Brigitte; Gartmann, Andres

2014-05-01

Sorting of sedimentary rocks is a proxy for the environmental conditions at the time of deposition, in particular the runoff that moved and deposited the material forming the rocks. Settling of sediment is strongly influenced by the gravity of a planetary body. As a consequence, sorting of a sedimentary rock varies with gravity for a given depth and velocity of surface runoff. Theoretical considerations for spheres indicate that sorting is more uniform on Mars than on Earth for runoff of identical depth. In reality, such considerations have to be applied with great caution because the shape of a particle strongly influences drag. Drag itself can only be calculated directly for an irregularly shaped particle with great computational effort, if at all. Therefore, even for terrestrial applications, sediment settling velocities are often determined directly, e.g. by measurements using settling tubes. In this study the results of settling tube tests conducted under reduced gravity during three experimental flights conducted in November 2012 and 2013 are presented. Nine types of sediment, ranging in size, shape and density were tested in custom-designed settling tubes during parabolas of Martian gravity lasting 20 to 25 seconds. Based on the observed settling velocities, the applicability of empirical relationships developed on Earth to assess particle settling on Mars are discussed. In addition, the potential effects of reduced gravity on the sorting of sedimentary rocks and their use as a proxy for runoff and thus environmental conditions on Mars are examined.

Influence of an aniline supplement on the stability of aerobic granular sludge.

PubMed

Dai, Yajie; Jiang, Yixin; Su, Haijia

2015-10-01

In order to evaluate the stability of aerobic granules in a toxic environment, this study discussed the influence of an aniline supplement on the properties and microbial community of aerobic granules. In the early stages of sequencing batch reactor (SBR) operation, an aniline supplement slightly affected the properties of the aerobic granules (strength, growth rate, SVI and so on). This effect was thereafter removed because of a change in the microbial community and the structure of aerobic granules: with the present of aniline, microbes with biodegradation ability appeared and gathered in the aerobic granules and the aerobic granules densified and settled faster as their SVI decreased to 35 mL/g and settling velocity increased to 41.56 m/h. When a synthetic waste water containing acetate as carbon source was used as influent, aniline (10-500 mg/L) could be degraded in 6 h, at a rate as high as 37.5 mg aniline/(L·h), with a removal rate in excess of 90%, while the effluent COD fell below 100 mg/L from the initial about 2000 mg/L. The aerobic granules cultured by acetate were compact, stable and resistant to aniline. Copyright © 2015 Elsevier Ltd. All rights reserved.

Production objectives, trait and breed preferences of farmers keeping N'Dama, Fulani Zebu and crossbred cattle and implications for breeding programs.

PubMed

Traoré, S A; Markemann, A; Reiber, C; Piepho, H P; Valle Zárate, A

2017-04-01

Many local livestock breeds in developing countries are being replaced by exotic breeds, leading to a loss of genetic resources. In southern Mali, for the past two decades, a trend towards increasing crossbreeding between the trypanotolerant N'Dama cattle and the trypano-susceptible Fulani Zebu cattle has been taking place. A survey with 160 farmers owning a cattle herd was carried out in southern Mali to investigate their production objectives, as well as trait and breed preferences and correlated socio-economic determinants in order to understand farmers' breeding decisions and to identify comparative advantages of three breed groups (N'Dama, Fulani Zebu and crossbreds) raised in the study area. Data were analyzed using an exploded logit model. The reasons for raising cattle, as well as trait and breed preferences reflected the multiple objectives of the farmers. Draught power and savings were the most important production objectives. Productive traits were ranked highest; farmers reported large body size as the most preferred trait, followed by fertility, draught ability and milk yield. Crossbreds were the favored breed group. Breed preferences were mainly explained by 'resistance to disease' for N'Dama cattle and 'high market price' for Fulani Zebu and crossbred cattle. Production objectives, trait and breed preferences were mainly influenced by farmer group (local farmers and settled transhumants). Local farmers put comparatively more emphasis on livestock functions linked to crop production such as draught power. They had a higher preference for traction ability as a selection trait and preferred N'Dama over Fulani Zebu cattle. Settled transhumants emphasized milk yield as a selection trait and preferred Fulani Zebu over N'Dama. The results indicate that the trend towards more crossbreeding will continue putting the N'Dama breed under high risk of genetic dilution in southern Mali. The N'Dama cattle remain a valuable breed due to their adaptive traits such as disease and drought tolerance and their good traction ability, fulfilling the diverse objectives of local farmers. Crossbreeding was found to be a promising breeding strategy, which might contribute to the maintenance of the local breed, provided that breeding schemes are thoroughly planned and organized.

Effort-reward imbalance and work ability: cross-sectional and longitudinal findings from the Second German Sociomedical Panel of Employees

PubMed Central

2012-01-01

Background Although data from longitudinal studies are sparse, effort-reward imbalance (ERI) seems to affect work ability. However, the potential pathway from restricted work ability to ERI must also be considered. Therefore, the aim of our study was to analyse cross-sectional and longitudinal associations between ERI and work ability and vice versa. Methods Data come from the Second German Sociomedical Panel of Employees. Logistic regression models were estimated to determine cross-sectional and longitudinal associations. The sample used to predict new cases of poor or moderate work ability was restricted to cases with good or excellent work ability at baseline. The sample used to predict new cases of ERI was restricted to persons without ERI at baseline. Results The cross-sectional analysis included 1501 full-time employed persons. The longitudinal analyses considered 600 participants with good or excellent baseline work ability and 666 participants without baseline ERI, respectively. After adjustment for socio-demographic variables, health-related behaviour and factors of the work environment, ERI was cross-sectionally associated with poor or moderate work ability (OR = 1.980; 95% CI: 1.428 to 2.747). Longitudinally, persons with ERI had 2.1 times higher odds of poor or moderate work ability after one year (OR = 2.093; 95% CI: 1.047 to 4.183). Conversely, persons with poor or moderate work ability had 2.6 times higher odds of an ERI after one year (OR = 2.573; 95% CI: 1.314 to 5.041). Conclusions Interventions that enable workers to cope with ERI or address indicators of ERI directly could promote the maintenance of work ability. Integration management programmes for persons with poor work ability should also consider their psychosocial demands. PMID:23067110

41 CFR 102-118.490 - What if my agency fails to settle a dispute within 30 days?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 41 Public Contracts and Property Management 3 2014-01-01 2014-01-01 false What if my agency fails... All Claims § 102-118.490 What if my agency fails to settle a dispute within 30 days? (a) If your agency fails to settle a dispute within 30 days, the TSP may appeal to: General Services Administration...

41 CFR 102-118.490 - What if my agency fails to settle a dispute within 30 days?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 41 Public Contracts and Property Management 3 2011-01-01 2011-01-01 false What if my agency fails... All Claims § 102-118.490 What if my agency fails to settle a dispute within 30 days? (a) If your agency fails to settle a dispute within 30 days, the TSP may appeal to: General Services Administration...

41 CFR 102-118.490 - What if my agency fails to settle a dispute within 30 days?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 41 Public Contracts and Property Management 3 2013-07-01 2013-07-01 false What if my agency fails... All Claims § 102-118.490 What if my agency fails to settle a dispute within 30 days? (a) If your agency fails to settle a dispute within 30 days, the TSP may appeal to: General Services Administration...

76 FR 56433 - Loveland Area Projects-Western Area Colorado Missouri Balancing Authority-Rate Order No. WAPA-155

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-13

... settled (minimum 4 MW) of metered load settled using WACM hourly pricing with no using WACM hourly pricing... than 7.5% (minimum pricing in no-penalty band. Customer 10 MW) of metered load settled using imbalance... or equal to 0.5 percent of its hourly average load, no Regulation Service charges will be assessed by...

43 CFR 30.150 - What action will the judge take if the interested parties agree to settle matters among themselves?

Code of Federal Regulations, 2011 CFR

2011-10-01

... Agreements § 30.150 What action will the judge take if the interested parties agree to settle matters among... 43 Public Lands: Interior 1 2011-10-01 2011-10-01 false What action will the judge take if the interested parties agree to settle matters among themselves? 30.150 Section 30.150 Public Lands: Interior...

77 FR 7621 - Self-Regulatory Organizations; The Options Clearing Corporation; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-13

... Change To Permit OCC To Clear and Settle Spot Gold Futures, Which Are Proposed To Be Traded by NASDAQ OMX... Substance of the Proposed Rule Change The proposed rule change will permit OCC to clear and settle Spot Gold... change is to permit OCC to clear and settle Spot Gold Futures, which are proposed to be traded by NFX. A...

Severe snow loads on mountain afforestation in Japan

Treesearch

Ryuzo Nitta; Yoshio Ozeki; Shoichi Niwano

1991-01-01

A simple device for estimating snow settling force on tree branches was used to determine the distribution of snow settling force at various heights in a snowy mountainous region in Japan. A trapezoidal distribution of snow settling force was found to exist at all sites tested. It is thought that a zoning scheme based on the damaging potential of snow on young man-made...

Measuring and modeling the magnetic settling of superparamagnetic nanoparticle dispersions.

PubMed

Prigiobbe, Valentina; Ko, Saebom; Huh, Chun; Bryant, Steven L

2015-06-01

In this paper, we present settling experiments and mathematical modeling to study the magnetic separation of superparamagnetic iron-oxide nanoparticles (SPIONs) from a brine. The experiments were performed using SPIONs suspensions of concentration between 3 and 202g/L dispersed in water and separated from the liquid under the effect of a permanent magnet. A 1D model was developed in the framework of the sedimentation theory with a conservation law for SPIONs and a mass flux function based on the Newton's law for motion in a magnetic field. The model describes both the hindering effect of suspension concentration (n) during settling due to particle collisions and the increase in settling rate due to the attraction of the SPIONs towards the magnet. The flux function was derived from the settling experiments and the numerical model validated against the analytical solution and the experimental data. Suspensions of SPIONs were of 2.8cm initial height, placed on a magnet, and monitored continuously with a digital camera. Applying a magnetic field of 0.5T of polarization, the SPION's velocity was of approximately 3·10(-5)m/s close to the magnet and decreases of two orders of magnitude across the domain. The process was characterized initially by a classical sedimentation behavior, i.e., an upper interface between the clear water and the suspension slowly moving towards the magnet and a lower interface between the sediment layer and the suspension moving away from the magnet. Subsequently, a rapid separation of nanoparticle occured suggesting a non-classical settling phenomenon induced by magnetic forces which favor particle aggregation and therefore faster settling. The rate of settling decreased with n and an optimal condition for fast separation was found for an initial n of 120g/L. The model agrees well with the measurements in the early stage of the settling, but it fails to describe the upper interface movement during the later stage, probably because of particle aggregation induced by magnetization which is not accounted for in the model. Copyright © 2015 Elsevier Inc. All rights reserved.

Association of Cryptosporidium with bovine faecal particles and implications for risk reduction by settling within water supply reservoirs.

PubMed

Brookes, Justin D; Davies, Cheryl M; Hipsey, Matthew R; Antenucci, Jason P

2006-03-01

Artificial cow pats were seeded with Cryptosporidium oocysts and subjected to a simulated rainfall event. The runoff from the faecal pat was collected and different particle size fractions were collected within settling columns by exploiting the size-dependent settling velocities. Particle size and Cryptosporidium concentration distribution at 10 cm below the surface was measured at regular intervals over 24 h. Initially a large proportion of the total volume of particles belonged to the larger size classes (> 17 microm). However, throughout the course of the experiment, there was a sequential loss of the larger size classes from the sampling depth and a predominance of smaller particles (< 17 microm). The Cryptosporidium concentration at 10 cm depth did not change throughout the experiment. In the second experiment samples were taken from different depths within the settling column. Initially 26% of particles were in the size range 124-492 microm. However, as these large particles settled there was an enrichment at 30 cm after one hour (36.5-49.3%). There was a concomitant enrichment of smaller particles near the surface after 1 h and 24 h. For Pat 1 there was no difference in Cryptosporidium concentration with depth after 1 h and 24 h. In Pat 2 there was a difference in concentration between the surface and 30 cm after 24 h. However, this could be explained by the settling velocity of a single oocyst. The results suggested that oocysts are not associated with large particles, but exist in faecal runoff as single oocysts and hence have a low (0.1 m(d-1)) settling velocity. The implications of this low settling velocity on Cryptosporidium risk reduction within water supply reservoirs was investigated through the application of a three-dimensional model of oocyst fate and transport to a moderately sized reservoir (26 GL). The model indicated that the role of settling on oocyst concentration reduction within the water column is between one and three orders of magnitude less than that caused by advection and dilution, depending on the strength of hydrodynamic forcing.

Hands-On Learning: A Problem-Based Approach to Teaching Microsoft Excel

ERIC Educational Resources Information Center

Slayter, Erik; Higgins, Lindsey M.

2018-01-01

The development of a student's ability to make data-driven decisions has become a focus in higher education (Schield 1999; Stephenson and Caravello 2007). Data literacy, the ability to understand and use data to effectively inform decisions, is a fundamental component of information competence (Mandinach and Gummer 2013; Stephenson and Caravello,…

Closing the Excellence Gap: Investigation of an Expanded Talent Search Model for Student Selection into an Extracurricular STEM Program in Rural Middle Schools

ERIC Educational Resources Information Center

Assouline, Susan G.; Ihrig, Lori M.; Mahatmya, Duhita

2017-01-01

High-potential students from underresourced rural schools face barriers that reduce options for academic advancement, which widens the excellence gap between them and their more affluent, but similar ability peers. The goal of this study was to investigate the effectiveness of an expanded above-level testing model to identify high-potential rural…

Settling speeds on flocs in fresh water and seawater

NASA Astrophysics Data System (ADS)

Burban, Pierre-Yves; Xu, Yao-Jun; McNeil, Joe; Lick, Wilbert

1990-10-01

The settling speeds of floes of fine-grained, natural sediments approximately 10-200 μm in diameter have been measured in both fresh water and seawater. These floes were formed at fluid shears of 100, 200, and 400 s-1 and at sediment concentrations of 10, 100, and 400 mg/L, values typical of conditions in the near-shore areas of lakes and oceans, especially during storm conditions. It is demonstrated that the settling speed of a floe is a strong function of fluid shear and sediment concentration as well as of the diameter of the floe, but it is a weak function of salinity. For the same diameter and salinity, floes produced at the lower fluid shears and sediment concentrations have lower settling speeds than do floes produced at higher fluid shears and sediment concentrations. If the conditions of fluid shear and sediment concentration under which the floes were produced are unknown or ignored, it is shown that the settling speed of a floe is a weak function of diameter and salinity.

Measurement of Sediment Deposition Rates using an Optical Backscatter Sensor

NASA Astrophysics Data System (ADS)

Ridd, P.; Day, G.; Thomas, S.; Harradence, J.; Fox, D.; Bunt, J.; Renagi, O.; Jago, C.

2001-02-01

An optical method for measuring siltation of sediment has been developed using an optical fibre backscatter (OBS) nephelometer. Sediment settling upon the optical fibre sensor causes an increase in the backscatter reading which can be related to the settled sediment surface density (SSSD) as measured in units of mg cm -2. Calibration and laboratory tests indicate that the resolution of measurements of SSSD is 0·01 mg cm -2and an accuracy of 5% in still water. In moving water it is more difficult to determine the accuracy of the method because other methods with suitable resolution are unavailable. However, indirect methods using measurements of changing suspended sediment concentration in a ring flume, indicate that the OBS method under-predicts deposition. The series of siltation from three field sites are presented. This sensor offers considerable advances over other methods of measuring settling because time series of settling may be taken and thus settling events may be related to other hydrodynamic parameters such as wave climate and currents.

Linear stability analysis of particle-laden hypopycnal plumes

NASA Astrophysics Data System (ADS)

Farenzena, Bruno Avila; Silvestrini, Jorge Hugo

2017-12-01

Gravity-driven riverine outflows are responsible for carrying sediments to the coastal waters. The turbulent mixing in these flows is associated with shear and gravitational instabilities such as Kelvin-Helmholtz, Holmboe, and Rayleigh-Taylor. Results from temporal linear stability analysis of a two-layer stratified flow are presented, investigating the behavior of settling particles and mixing region thickness on the flow stability in the presence of ambient shear. The particles are considered suspended in the transport fluid, and its sedimentation is modeled with a constant valued settling velocity. Three scenarios, regarding the mixing region thickness, were identified: the poorly mixed environment, the strong mixed environment, and intermediate scenario. It was observed that Kelvin-Helmholtz and settling convection modes are the two fastest growing modes depending on the particles settling velocity and the total Richardson number. The second scenario presents a modified Rayleigh-Taylor instability, which is the dominant mode. The third case can have Kelvin-Helmholtz, settling convection, and modified Rayleigh-Taylor modes as the fastest growing mode depending on the combination of parameters.

Computational fluid dynamics modelling of hydraulics and sedimentation in process reactors during aeration tank settling.

PubMed

Jensen, M D; Ingildsen, P; Rasmussen, M R; Laursen, J

2006-01-01

Aeration tank settling is a control method allowing settling in the process tank during high hydraulic load. The control method is patented. Aeration tank settling has been applied in several waste water treatment plants using the present design of the process tanks. Some process tank designs have shown to be more effective than others. To improve the design of less effective plants, computational fluid dynamics (CFD) modelling of hydraulics and sedimentation has been applied. This paper discusses the results at one particular plant experiencing problems with partly short-circuiting of the inlet and outlet causing a disruption of the sludge blanket at the outlet and thereby reducing the retention of sludge in the process tank. The model has allowed us to establish a clear picture of the problems arising at the plant during aeration tank settling. Secondly, several process tank design changes have been suggested and tested by means of computational fluid dynamics modelling. The most promising design changes have been found and reported.

Settling of dilbit-derived oil-mineral aggregates (OMAs) & transport parameters for oil spill modelling.

PubMed

O'Laughlin, Casey M; Law, Brent A; Zions, Vanessa S; King, Thomas L; Robinson, Brian; Wu, Yongsheng

2017-11-15

The size and settling velocity of oil-mineral aggregates (OMAs) derived from diluted bitumen are primary constituents in predictive models for evaluating the potential fate of oil spilled in the aquatic environment. A series of low sediment concentration (15mg·L -1 ), colder water (<10°C) wave tank experiments designed to measure variability in these parameters in naturally-formed OMAs in response the presence or absence of chemical dispersant are discussed. Corresponding lab experiments revealed settling velocities of artificially formed OMAs on the order of 0.1-0.4mm·s -1 . High-resolution imagery of settling particles were analyzed for particle size, density and settling velocity. In situ formation of OMAs in the wave tank was unsuccessful. Possible effects of chemical dispersant on natural sediment flocculation, the size of suspended oil droplets and clearance rates of suspended particles are discussed. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

A longitudinal study of child sleep in high and low risk families: relationship to early maternal settling strategies and child psychological functioning.

PubMed

Sheridan, Andrew; Murray, Lynne; Cooper, Peter J; Evangeli, Michael; Byram, Victoria; Halligan, Sarah L

2013-03-01

To investigate whether sleep disturbances previously found to characterise high risk infants: (a) persist into childhood; (b) are influenced by early maternal settling strategies and (c) predict cognitive and emotional/behavioural functioning. Mothers experiencing high and low levels of psychosocial adversity (risk) were recruited antenatally and longitudinally assessed with their children. Mothers completed measures of settling strategies and infant sleep postnatally, and at 12 and 18 months, infant age. At five years, child sleep characteristics were measured via an actigraphy and maternal report; IQ and child adjustment were also assessed. Sleep disturbances observed in high-risk infants persisted at five years. Maternal involvement in infant settling was greater in high risk mothers, and predicted less optimal sleep at five years. Poorer five year sleep was associated with concurrent child anxiety/depression and aggression, but there was limited evidence for an influence of early sleep problems. Associations between infant/child sleep characteristics and IQ were also limited. Early maternal over-involvement in infant settling is associated with less optimal sleep in children, which in turn, is related to child adjustment. The findings highlight the importance of supporting parents in the early development of good settling practices, particularly in high-risk populations. Copyright © 2012 Elsevier B.V. All rights reserved.

Sediment on Mars: settling faster, moving slower

NASA Astrophysics Data System (ADS)

Kuhn, N. J.

2013-12-01

Using empirical approaches developed on Earth to assess Martian hydrology based on conglomerates such as those found at Gale crater may deliver false results because Martian gravity potentially alters flow-sediment interaction compared to Earth. In this study, we report the results of our Mars Sedimentation Experiments (MarsSedEx I and II) which used settling tubes during reduced gravity flights in November 2012 (and scheduled for November 2013) on board Zero g's G-Force 1. The settling velocity data collected during the flights are compared to several models for terrestrial settling velocities. The results indicate that settling velocities on Mars are underestimated by up to 30 to 50%, depending on the selected model. As a consequence, transport distances of sediment particles increase by a similar proportion in a given flow. We suspect that the underestimation of settling velocity is caused by poor capture of flow hydraulics under reduced gravity. While MarsSedEx I (and II) results are only very preliminary, they indicate that applying empirically derived models for Earth to conglomerates such as those found at Garle crater to derive properties of surface runoff carries the risk of significantly misjudging flow depth and velocities. In the light of the potentially strong influence of topography on runoff generation on Mars, we may therefore end up looking for water in the wrong place.

Nutrigenomics of Body Weight Regulation: A Rationale for Careful Dissection of Individual Contributors

PubMed Central

Keijer, Jaap; Hoevenaars, Femke P. M.; Nieuwenhuizen, Arie; van Schothorst, Evert M.

2014-01-01

Body weight stability may imply active regulation towards a certain physiological condition, a body weight setpoint. This interpretation is ill at odds with the world-wide increase in overweight and obesity. Until now, a body weight setpoint has remained elusive and the setpoint theory did not provide practical clues for body weight reduction interventions. For this an alternative theoretical model is necessary, which is available as the settling point model. The settling point model postulates that there is little active regulation towards a predefined body weight, but that body weight settles based on the resultant of a number of contributors, represented by the individual’s genetic predisposition, in interaction with environmental and socioeconomic factors, such as diet and lifestyle. This review refines the settling point model and argues that by taking body weight regulation from a settling point perspective, the road will be opened to careful dissection of the various contributors to establishment of body weight and its regulation. This is both necessary and useful. Nutrigenomic technologies may help to delineate contributors to body weight settling. Understanding how and to which extent the different contributors influence body weight will allow the design of weight loss and weight maintenance interventions, which hopefully are more successful than those that are currently available. PMID:25338273

Nutrigenomics of body weight regulation: a rationale for careful dissection of individual contributors.

PubMed

Keijer, Jaap; Hoevenaars, Femke P M; Nieuwenhuizen, Arie; van Schothorst, Evert M

2014-10-21

Body weight stability may imply active regulation towards a certain physiological condition, a body weight setpoint. This interpretation is ill at odds with the world-wide increase in overweight and obesity. Until now, a body weight setpoint has remained elusive and the setpoint theory did not provide practical clues for body weight reduction interventions. For this an alternative theoretical model is necessary, which is available as the settling point model. The settling point model postulates that there is little active regulation towards a predefined body weight, but that body weight settles based on the resultant of a number of contributors, represented by the individual's genetic predisposition, in interaction with environmental and socioeconomic factors, such as diet and lifestyle. This review refines the settling point model and argues that by taking body weight regulation from a settling point perspective, the road will be opened to careful dissection of the various contributors to establishment of body weight and its regulation. This is both necessary and useful. Nutrigenomic technologies may help to delineate contributors to body weight settling. Understanding how and to which extent the different contributors influence body weight will allow the design of weight loss and weight maintenance interventions, which hopefully are more successful than those that are currently available.

An Approach to Understanding Cohesive Slurry Settling, Mobilization, and Hydrogen Gas Retention in Pulsed Jet Mixed Vessels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gauglitz, Phillip A.; Wells, Beric E.; Fort, James A.

2009-05-22

The Hanford Waste Treatment and Immobilization Plant (WTP) is being designed and built to pretreat and vitrify a large portion of the waste in Hanford’s 177 underground waste storage tanks. Numerous process vessels will hold waste at various stages in the WTP. Some of these vessels have mixing-system requirements to maintain conditions where the accumulation of hydrogen gas stays below acceptable limits, and the mixing within the vessels is sufficient to release hydrogen gas under normal conditions and during off-normal events. Some of the WTP process streams are slurries of solid particles suspended in Newtonian fluids that behave as non-Newtonianmore » slurries, such as Bingham yield-stress fluids. When these slurries are contained in the process vessels, the particles can settle and become progressively more concentrated toward the bottom of the vessels, depending on the effectiveness of the mixing system. One limiting behavior is a settled layer beneath a particle-free liquid layer. The settled layer, or any region with sufficiently high solids concentration, will exhibit non-Newtonian rheology where it is possible for the settled slurry to behave as a soft solid with a yield stress. In this report, these slurries are described as settling cohesive slurries.« less

Sedimentation from flocculated suspensions in the presence of settling-driven gravitational interface instabilities

NASA Astrophysics Data System (ADS)

Rouhnia, Mohamad; Strom, Kyle

2015-09-01

We experimentally examine sedimentation from a freshwater suspension of clay flocs overlying saltwater in the presence of gravitational instabilities. The study seeks to determine: (1) if flocculation hampers or alters interface instability formation; (2) how the removal rates of sediment from the buoyant layer compare to those predicted by individual floc settling; and (3) whether or not it is possible to develop a model for effective settling velocity. The experiments were conducted in a tank at isothermal conditions. All experiments were initially stably stratified but later developed instabilities near the interface that grew into downward convecting plumes of fluid and sediment. Throughout, we measured sediment concentration in the upper and lower layers, floc size, and plume descent rates. The data showed that flocculation modifies the mixture settling velocity, and therefore shifts the mode of interface instability from double-diffusive (what one would expect from unflocculated clay) to settling-driven leaking and Rayleigh-Taylor instability formation. Removal rates of sediment from the upper layer in the presence of these instabilities were on the same order of magnitude as those predicted by individual floc settling. However, removal rates were found to better correlate with the speed of the interface plumes. A simple force-balance model was found to be capable of reasonably describing plume velocity based on concentration in the buoyant layer. This relation, coupled with a critical Grashof number and geometry relations, allowed us to develop a model for the effective settling velocity of the mixture based solely on integral values of the upper layer.

Significance of settling model structures and parameter subsets in modelling WWTPs under wet-weather flow and filamentous bulking conditions.

PubMed

Ramin, Elham; Sin, Gürkan; Mikkelsen, Peter Steen; Plósz, Benedek Gy

2014-10-15

Current research focuses on predicting and mitigating the impacts of high hydraulic loadings on centralized wastewater treatment plants (WWTPs) under wet-weather conditions. The maximum permissible inflow to WWTPs depends not only on the settleability of activated sludge in secondary settling tanks (SSTs) but also on the hydraulic behaviour of SSTs. The present study investigates the impacts of ideal and non-ideal flow (dry and wet weather) and settling (good settling and bulking) boundary conditions on the sensitivity of WWTP model outputs to uncertainties intrinsic to the one-dimensional (1-D) SST model structures and parameters. We identify the critical sources of uncertainty in WWTP models through global sensitivity analysis (GSA) using the Benchmark simulation model No. 1 in combination with first- and second-order 1-D SST models. The results obtained illustrate that the contribution of settling parameters to the total variance of the key WWTP process outputs significantly depends on the influent flow and settling conditions. The magnitude of the impact is found to vary, depending on which type of 1-D SST model is used. Therefore, we identify and recommend potential parameter subsets for WWTP model calibration, and propose optimal choice of 1-D SST models under different flow and settling boundary conditions. Additionally, the hydraulic parameters in the second-order SST model are found significant under dynamic wet-weather flow conditions. These results highlight the importance of developing a more mechanistic based flow-dependent hydraulic sub-model in second-order 1-D SST models in the future. Copyright © 2014 Elsevier Ltd. All rights reserved.

BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTH. THE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

BLAISDELL SLOW SAND FILTER WASHING MACHINE. VIEW LOOKING SOUTH. THE OUTSIDE FACE OF THE NORTH WALL OF SETTLING RESERVOIR NO. 3 IS SEEN AT THE RIGHT. THE SETTLING RESERVOIR IS ELEVATED ABOVE THE FILTERING RESERVOIR TO ACHIEVE GRAVITY WATER FLOW FROM THE SETTLING RESERVOIR INTO THE FILTERING RESERVOIR. - Yuma Main Street Water Treatment Plant, Blaisdell Slow Sand Filter Washing Machine, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

VIEW LOOKING NORTHWEST TOWARD SOUTHEAST CORNER OF SETTLING RESERVOIR NO. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW LOOKING NORTHWEST TOWARD SOUTHEAST CORNER OF SETTLING RESERVOIR NO. 3. THE SOUTHWEST CORNER OF SETTLING RESERVOIR NO. 1 IS AT THE FAR LEFT. THE BLAISDELL SLOW SAND FILTER WASHING MACHINE IS SEEN AT THE RIGHT. THE SOUTHERN PACIFIC RAILROAD RESERVOIR IS SEEN ON THE HORIZON AT LEFT. JONES STREET IS IN THE FOREGROUND. - Yuma Main Street Water Treatment Plant, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

Settling velocities of fine suspended particles in the Changjiang Estuary, China

USGS Publications Warehouse

Shi, Z.; Zhou, H.J.; Eittreim, S.L.; Winterwerp, J.C.

2003-01-01

Point-sampled suspended sediment concentration profiles (grain size largely < 32 ??m) were measured in August 1978, April 1990, and May 1990 in the Changjiang Estuary. They were selectively fit with the Rouse equation in order to calculate the median settling velocities ws,50 of fine suspended particles in the Changjiang Estuary, East China Sea. Calculated settling velocities ranged from 0.4 to 4.1 mm s-1. Furthermore, ws values increased with the mean concentration C?? of sediment in suspension. The best-fit equation for the field settling velocity of fine particles in the Changjiang Estuary can be expressed by the power law: ws = 2.37 C??0.84 (r2 < 0.3). ?? 2003 Elsevier Ltd. All rights reserved.

Settling properties of aerobic granular sludge (AGS) and aerobic granular sludge molasses (AGSM)

NASA Astrophysics Data System (ADS)

Mat Saad, Azlina; Aini Dahalan, Farrah; Ibrahim, Naimah; Yasina Yusuf, Sara; Aqlima Ahmad, Siti; Khalil, Khalilah Abdul

2018-03-01

Aerobic granulation technology is applied to treat domestic and industrial wastewater. The Aerobic granular sludge (AGS) cultivated has strong properties that appears to be denser and compact in physiological structure compared to the conventional activated sludge. It offers rapid settling for solid:liquid separation in wastewater treatment. Aerobic granules were developed using sequencing batch reactor (SBR) with intermittent aerobic - anaerobic mode with 8 cycles in 24 hr. This study examined the settling velocity performance of cultivated aerobic granular sludge (AGS) and aerobic granular sludge molasses (AGSM). The elemental composition in both AGS and AGSM were determined using X-ray fluorescence (XRF). The results showed that AGSM has higher settling velocity 30.5 m/h compared to AGS.

Why Ability Grouping Must End: Achieving Excellence and Equity in American Education.

ERIC Educational Resources Information Center

Braddock, Jomills Henry, II; Slavin, Robert E.

This review of research focuses on policies and practices that result in placing students in groups that are more or less homogeneous with respect to academic performance. Recent analysis of data from the National Education Longitudinal Study of 1988 provides the largest and best-controlled multi-year study of ability grouping ever conducted…

Combining Excellence and Ethics: Implications for Moral Education for the Gifted

ERIC Educational Resources Information Center

Tirri, Kirsi

2011-01-01

In this article the current empirical research on morality and giftedness is reviewed with an emphasis on moral sensitivity. The component of moral judgment has been the most studied aspect in morality. Although high-ability students have been shown to be superior in moral judgment when compared to average-ability students, morality includes other…

77 FR 15104 - Environmental Laboratory Advisory Board Membership

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-14

... sectors: Academia. Business and industry. Environmental laboratory commercial, municipal, small, other...; Excellent interpersonal, oral, and written communication and consensus-building skills; and Ability to serve...

Extended GTST-MLD for aerospace system safety analysis.

PubMed

Guo, Chiming; Gong, Shiyu; Tan, Lin; Guo, Bo

2012-06-01

The hazards caused by complex interactions in the aerospace system have become a problem that urgently needs to be settled. This article introduces a method for aerospace system hazard interaction identification based on extended GTST-MLD (goal tree-success tree-master logic diagram) during the design stage. GTST-MLD is a functional modeling framework with a simple architecture. Ontology is used to extend the ability of system interaction description in GTST-MLD by adding the system design knowledge and the past accident experience. From the level of functionality and equipment, respectively, this approach can help the technician detect potential hazard interactions. Finally, a case is used to show the method. © 2011 Society for Risk Analysis.

Iron and manganese in anaerobic respiration: environmental significance, physiology, and regulation

NASA Technical Reports Server (NTRS)

Nealson, K. H.; Saffarini, D.

1994-01-01

Dissimilatory iron and/or manganese reduction is known to occur in several organisms, including anaerobic sulfur-reducing organisms such as Geobacter metallireducens or Desulfuromonas acetoxidans, and facultative aerobes such as Shewanella putrefaciens. These bacteria couple both carbon oxidation and growth to the reduction of these metals, and inhibitor and competition experiments suggest that Mn(IV) and Fe(III) are efficient electron acceptors similar to nitrate in redox abilities and capable of out-competing electron acceptors of lower potential, such as sulfate (sulfate reduction) or CO2 (methanogenesis). Field studies of iron and/or manganese reduction suggest that organisms with such metabolic abilities play important roles in coupling the oxidation of organic carbon to metal reduction under anaerobic conditions. Because both iron and manganese oxides are solids or colloids, they tend to settle downward in aquatic environments, providing a physical mechanism for the movement of oxidizing potential into anoxic zones. The resulting biogeochemical metal cycles have a strong impact on many other elements including carbon, sulfur, phosphorous, and trace metals.

[Toward a conditional price for medicine?].

PubMed

Baseilhac, E

2013-09-01

For the first time, and as an exceptional option, the 2012 LEEM-CEPS framework agreement introduces the notion of conditional prices in conventional practice. The contractualization of drug price according to changes in its value that could occur in "real world" enables the Payer and the Company to settle, in a predictable manner, the "bet" represented by first registration price setting. Its systematization is based on the ability to standardize the implementation and assessment of observational studies, whereas the analysis and sharing of the risk of value changes (depreciation, appreciation) are structuring elements of the contractualization. Ethical from both the payer's and patient's point of view, drug price conditionality on its value is impeded by compliance with legal and economic constraints for the company, that should be taken into account by legalising this latter's ability to influence it through observance or therapeutic education and by guaranteeing a sufficiently long period of revenues for the company. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Modeling the filtration ability of stockpiled filtering facepiece

NASA Astrophysics Data System (ADS)

Rottach, Dana R.

2016-03-01

Filtering facepiece respirators (FFR) are often stockpiled for use during public health emergencies such as an infectious disease outbreak or pandemic. While many stockpile administrators are aware of shelf life limitations, environmental conditions can lead to premature degradation. Filtration performance of a set of FFR retrieved from a storage room with failed environmental controls was measured. Though within the expected shelf life, the filtration ability of several respirators was degraded, allowing twice the penetration of fresh samples. The traditional picture of small particle capture by fibrous filter media qualitatively separates the effect of inertial impaction, interception from the streamline, diffusion, settling, and electrostatic attraction. Most of these mechanisms depend upon stable conformational properties. However, common FFR rely on electrets to achieve their high performance, and over time heat and humidity can cause the electrostatic media to degrade. An extension of the Langevin model with correlations to classical filtration concepts will be presented. The new computational model will be used to predict the change in filter effectiveness as the filter media changes with time.

Settling velocity of marine microplastic particles: laboratory tests

NASA Astrophysics Data System (ADS)

Isachenko, Igor; Khatmullina, Lilia; Chubarenko, Irina; Stepanova, Natalia

2016-04-01

An assessment of the settling velocity of different classes of microplastic particles (< 5 mm) is crucial for the prediction of their transport and fate. The Reynolds numbers for the settling microplastic particles is usually outside the Stokes range (Re << 1), but still far from fully developed turbulent flow (Re >105). Even for such transitional regime, the settling velocity of the particles that could be treated as more or less smooth spheres can be predicted with high accuracy by relationships available in publications. This is not the case for the non-spherical particles like fibres or flakes. There are quite a large number of quasi-theoretical or semi-empirical approaches that take into account the shape and roughness of the particles, usually in the applications to transport of natural sediments. Some engineering formulas for the settling velocity are also developed which have simpler structure along with high degree of accuracy on the set of experimental data. For marine microplastic particles, the absence of relationship between the settling velocity and the properties of the particle requires testing on the samples of marine microplastics. Besides small fragments of rigid plastic (granules, microbeads), there are also fibres and thin plastic sheets (flakes) with some degree of flexibility. The applicability of available formulae to thin and/or flexible plastic particles again requires verification by experiments. The set of laboratory experiments on settling of microplastic particles of various shapes and excess densities in homogeneous water is reported. The particles were collected in water column, bottom sediments and on the beaches of the South-Eastern Baltic. The experiments demonstrate not just different regimes of motion but different manner of the sinking of spheres, flakes and fibres. The very definition of the "settling velocity" has a specific meaning for every kind of a particle shape. The results of test measurements are compared with predictions by several published semi-empirical formulae. We conclude that there are several new questions to discuss in this regard: (i) proper definition of the meaning of "settling velocity" for complicated motion of particles of different shape classes, (ii) usage of formulae calibrated for particles in the density range characteristic for plastics (not natural sands, etc.). The research is supported by the Russian Science Foundation, project number 15-17-10020.

The Emergent Properties of Conspecific Attraction Can Limit a Species' Ability to Track Environmental Change.

PubMed

Stodola, Kirk W; Ward, Michael P

2017-06-01

Multiple biotic, abiotic, and evolutionary constraints interact to determine a species' range. However, most species are not present in all suitable and accessible locations. Dispersal ability may explain why many species do not occupy all suitable habitat, but highly mobile species also exhibit a mismatch. Habitat selection behavior where individuals are site faithful and settle near conspecifics could create a social pressure that make a species' geographic range resistant to change. We investigated this possibility by using an individual-based model of habitat selection where habitat quality moved each year. Our model demonstrated the benefits of conspecific attraction in relatively stable environments and its detrimental influence when habitat quality shifted rapidly. These results were most apparent when adult survival was high, because site fidelity led to more individuals occupying poor-quality habitat areas as habitat quality changed. These individuals attracted other dispersing individuals, thereby decreasing the ability to track shifts in habitat quality, which we refer to as "social inertia." Consequently, social inertia may arise for species that exhibit site fidelity and conspecific attraction, which may have conservation implications in light of climate change and widespread alteration of natural habitats.

Sensitivity of estuarine turbidity maximum to settling velocity, tidal mixing, and sediment supply

USGS Publications Warehouse

Warner, J.C.; Sherwood, C.R.; Geyer, W.R.; ,

2007-01-01

Estuarine turbidity maximum, numerical modeling, settling velocity, stratification The spatial and temporal distribution of suspended material in an Estuarine Turbidity Maxima (ETM) is primarily controlled by particle settling velocity, tidal mixing, shear-stress thresholds for resuspension, and sediment supply. We vary these parameters in numerical experiments of an idealized two-dimensional (x-z) estuary to demonstrate their affects on the development and retention of particles in an ETM. Parameters varied are the settling velocity (0.01, 0.1, and 0.5 mm/s), tidal amplitude (0.4 m 12 hour tide and 0.3 to 0.6 m 14 day spring neap cycle), and sediment availability (spatial supply limited or unlimited; and temporal supply as a riverine pulse during spring vs. neap tide). Results identify that particles with a low settling velocity are advected out of the estuary and particles with a high settling velocity provide little material transport to an ETM. Particles with an intermediate settling velocity develop an ETM with the greatest amount of material retained. For an unlimited supply of sediment the ETM and limit of salt intrusion co-vary during the spring neap cycle. The ETM migrates landward of the salt intrusion during spring tides and seaward during neap tides. For limited sediment supply the ETM does not respond as an erodible pool of sediment that advects landward and seaward with the salt front. The ETM is maintained seaward of the salt intrusion and controlled by the locus of sediment convergence in the bed. For temporal variability of sediment supplied from a riverine pulse, the ETM traps more sediment if the pulse encounters the salt intrusion at neap tides than during spring tides. ?? 2007 Elsevier B.V. All rights reserved.

Enhanced settling of nonheavy inertial particles in homogeneous isotropic turbulence: The role of the pressure gradient and the Basset history force.

PubMed

van Hinsberg, M A T; Clercx, H J H; Toschi, F

2017-02-01

The Stokes drag force and the gravity force are usually sufficient to describe the behavior of sub-Kolmogorov-size (or pointlike) heavy particles in turbulence, in particular when the particle-to-fluid density ratio ρ_{p}/ρ_{f}≳10^{3} (with ρ_{p} and ρ_{f} the particle and fluid density, respectively). This is, in general, not the case for smaller particle-to-fluid density ratios, in particular not for ρ_{p}/ρ_{f}≲10^{2}. In that case the pressure gradient force, added mass effects, and the Basset history force also play important roles. In this study we focus on the understanding of the role of these additional forces, all of hydrodynamic origin, in the settling of particles in turbulence. In order to qualitatively elucidate the complex dynamics of such particles in homogeneous isotropic turbulence, we first focus on the case of settling of such particles in the flow field of a single vortex. After having explored this simplified case we extend our analysis to homogeneous isotropic turbulence. In general, we found that the pressure gradient force leads to a decrease in the settling velocity. This can be qualitatively understood by the fact that this force prevents the particles from sweeping out of vortices, a mechanism known as preferential sweeping which causes enhanced settling. Additionally, we found that the Basset history force can both increase and decrease the enhanced settling, depending on the particle Stokes number. Finally, the role of the nonlinear Stokes drag has been explored, confirming that it affects settling of inertial particles in turbulence, but only in a limited way for the parameter settings used in this investigation.

Allergens in Urban Schools and Homes of Children with Asthma

PubMed Central

Permaul, Perdita; Hoffman, Elaine B.; Fu, Chunxia; Sheehan, William J.; Baxi, Sachin N.; Gaffin, Jonathan M.; Lane, Jeffrey P.; Bailey, Ann; King, Eva; Chapman, Martin D.; Gold, Diane R.; Phipatanakul, Wanda

2012-01-01

Background Most studies of indoor allergens have focused on the home environment. However, schools may be an important site of allergen exposure for children with asthma. We compared school allergen exposure to home exposure in a cohort of children with asthma. Correlations between settled dust and airborne allergen levels in classrooms were examined. Methods Settled dust and airborne samples from 12 inner-city schools were analyzed for indoor allergens using multiplex array technology (MARIA). School samples were linked to students with asthma enrolled in the School Inner-City Asthma Study (SICAS). Settled dust samples from students’ bedrooms were analyzed similarly. Results From schools, 229 settled dust and 197 airborne samples were obtained. From homes, 118 settled dust samples were obtained. Linear mixed regression models of log-transformed variables showed significantly higher settled dust levels of mouse, cat and dog allergens in schools than homes (545% higher for Mus m 1, estimated absolute difference 0.55 μg/g, p<0.0001; 198% higher for Fel d 1, estimated absolute difference 0.13 μg/g, p=0.0033; and 144% higher for Can f 1, estimated absolute difference 0.05 μg/g, p=0.0008). Airborne and settled dust Mus m 1 levels in classrooms were moderately correlated (r=0.48; p< 0.0001). There were undetectable to very low levels of cockroach and dust mite allergens in both homes and schools. Conclusions Mouse allergen levels in schools were substantial. In general, cat and dog allergen levels were low, but detectable, and were higher in schools. Aerosolization of mouse allergen in classrooms may be a significant exposure for students. Further studies are needed to evaluate the effect of indoor allergen exposure in schools on asthma morbidity in students with asthma. PMID:22672325

Sediment transport and deposition on a river-dominated tidal flat: An idealized model study

USGS Publications Warehouse

Sherwood, Christopher R.; Chen, Shih-Nan; Geyer, W. Rockwell; Ralston, David K.

2010-01-01

A 3-D hydrodynamic model is used to investigate how different size classes of river-derived sediment are transported, exported and trapped on an idealized, river-dominated tidal flat. The model is composed of a river channel flanked by sloping tidal flats, a configuration motivated by the intertidal region of the Skagit River mouth in Washington State, United States. It is forced by mixed tides and a pulse of freshwater and sediment with various settling velocities. In this system, the river not only influences stratification but also contributes a significant cross-shore transport. As a result, the bottom stress is strongly ebb-dominated in the channel because of the seaward advance of strong river flow as the tidal flats drain during ebbs. Sediment deposition patterns and mass budgets are sensitive to settling velocity. The lateral sediment spreading scales with an advective distance (settling time multiplied by lateral flow speed), thereby confining the fast settling sediment classes in the channel. Residual sediment transport is landward on the flats, because of settling lag, but is strongly seaward in the channel. The seaward transport mainly occurs during big ebbs and is controlled by a length scale ratio Ld/XWL, where Ld is a cross-shore advective distance (settling time multiplied by river outlet velocity), and XWL is the immersed cross-shore length of the intertidal zone. Sediment trapping requires Ld/XWL < 1, leading to more trapping for the faster settling classes. Sensitivity studies show that including stratification and reducing tidal range both favor sediment trapping, whereas varying channel geometries and asymmetry of tides has relatively small impacts. Implications of the modeling results on the south Skagit intertidal region are discussed.

Characteristics of Settling Coral Reef Fish Are Related to Recruitment Timing and Success

PubMed Central

Rankin, Tauna L.; Sponaugle, Su

2014-01-01

Many marine populations exhibit high variability in the recruitment of young into the population. While environmental cycles and oceanography explain some patterns of replenishment, the role of other growth-related processes in influencing settlement and recruitment is less clear. Examination of a 65-mo. time series of recruitment of a common coral reef fish, Stegastes partitus, to the reefs of the upper Florida Keys revealed that during peak recruitment months, settlement stage larvae arriving during dark lunar phases grew faster as larvae and were larger at settlement compared to those settling during the light lunar phases. However, the strength and direction of early trait-mediated selective mortality also varied by settlement lunar phase such that the early life history traits of 2–4 week old recruit survivors that settled across the lunar cycle converged to more similar values. Similarly, within peak settlement periods, early life history traits of settling larvae and selective mortality of recruits varied by the magnitude of the settlement event: larvae settling in larger events had longer PLDs and consequently were larger at settlement than those settling in smaller pulses. Traits also varied by recruitment habitat: recruits surviving in live coral habitat (vs rubble) or areas with higher densities of adult conspecifics were those that were larger at settlement. Reef habitats, especially those with high densities of territorial conspecifics, are more challenging habitats for young fish to occupy and small settlers (due to lower larval growth and/or shorter PLDs) to these habitats have a lower chance of survival than they do in rubble habitats. Settling reef fish are not all equal and the time and location of settlement influences the likelihood that individuals will survive to contribute to the population. PMID:25250964

Depth-Variable Settlement Patterns and Predation Influence on Newly Settled Reef Fishes (Haemulon spp., Haemulidae)

PubMed Central

Jordan, Lance K. B.; Lindeman, Kenyon C.; Spieler, Richard E.

2012-01-01

During early demersal ontogeny, many marine fishes display complex habitat-use patterns. Grunts of the speciose genus Haemulon are among the most abundant fishes on western North Atlantic coral reefs, with most species settling to shallow habitats (≤12 m). To gain understanding into cross-shelf distributional patterns exhibited by newly settled stages of grunts (<2 cm total length), we examined: 1) depth-specific distributions of congeners at settlement among sites at 8 m, 12 m, and 21 m, and 2) depth-variable predation pressure on newly settled individuals (species pooled). Of the six species identified from collections of newly settled specimens (n = 2125), Haemulon aurolineatum (tomtate), H. flavolineatum (French grunt), and H. striatum (striped grunt) comprised 98% of the total abundance; with the first two species present at all sites. Prevalence of H. aurolineatum and H. flavolineatum decreased substantially from the 8-m site to the two deeper sites. In contrast, H. striatum was absent from the 8-m site and exhibited its highest frequency at the 21-m site. Comparison of newly settled grunt delta density for all species on caged (predator exclusion) and control artificial reefs at the shallowest site (8-m) revealed no difference, while the 12-m and 21-m sites exhibited significantly greater delta densities on the caged treatment. This result, along with significantly higher abundances of co-occurring piscivorous fishes at the deeper sites, indicated lower predation pressure at the 8-m site. This study suggests habitat-use patterns of newly settled stages of some coral reef fishes that undergo ontogenetic shifts are a function of depth-variable predation pressure while, for at least one deeper-water species, proximity to adult habitat appears to be an important factor affecting settlement distribution. PMID:23272077

Formulation and Validation of an Efficient Computational Model for a Dilute, Settling Suspension Undergoing Rotational Mixing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sprague, Michael A.; Stickel, Jonathan J.; Sitaraman, Hariswaran

Designing processing equipment for the mixing of settling suspensions is a challenging problem. Achieving low-cost mixing is especially difficult for the application of slowly reacting suspended solids because the cost of impeller power consumption becomes quite high due to the long reaction times (batch mode) or due to large-volume reactors (continuous mode). Further, the usual scale-up metrics for mixing, e.g., constant tip speed and constant power per volume, do not apply well for mixing of suspensions. As an alternative, computational fluid dynamics (CFD) can be useful for analyzing mixing at multiple scales and determining appropriate mixer designs and operating parameters.more » We developed a mixture model to describe the hydrodynamics of a settling cellulose suspension. The suspension motion is represented as a single velocity field in a computationally efficient Eulerian framework. The solids are represented by a scalar volume-fraction field that undergoes transport due to particle diffusion, settling, fluid advection, and shear stress. A settling model and a viscosity model, both functions of volume fraction, were selected to fit experimental settling and viscosity data, respectively. Simulations were performed with the open-source Nek5000 CFD program, which is based on the high-order spectral-finite-element method. Simulations were performed for the cellulose suspension undergoing mixing in a laboratory-scale vane mixer. The settled-bed heights predicted by the simulations were in semi-quantitative agreement with experimental observations. Further, the simulation results were in quantitative agreement with experimentally obtained torque and mixing-rate data, including a characteristic torque bifurcation. In future work, we plan to couple this CFD model with a reaction-kinetics model for the enzymatic digestion of cellulose, allowing us to predict enzymatic digestion performance for various mixing intensities and novel reactor designs.« less

Melt segregation from silicic crystal mushes: a critical appraisal of possible mechanisms and their microstructural record

NASA Astrophysics Data System (ADS)

Holness, Marian B.

2018-06-01

One of the outstanding problems in understanding the behavior of intermediate-to-silicic magmatic systems is the mechanism(s) by which large volumes of crystal-poor rhyolite can be extracted from crystal-rich mushy storage zones in the mid-deep crust. The mechanisms commonly invoked are hindered settling, micro-settling, and compaction. The concept of micro-settling involves extraction of grains from a crystal framework during Ostwald ripening and has been shown to be non-viable in the metallic systems for which it was originally proposed. Micro-settling is also likely to be insignificant in silicic mushes, because ripening rates are slow for quartz and plagioclase, contact areas between grains in a crystal mush are likely to be large, and abundant low-angle grain boundaries promote grain coalescence rather than ripening. Published calculations of melt segregation rates by hindered settling (Stokes settling in a crystal-rich system) neglect all but fluid dynamical interactions between particles. Because tabular silicate minerals are likely to form open, mechanically coherent, frameworks at porosities as high as 75%, settling of single crystals is only likely in very melt-rich systems. Gravitationally-driven viscous compaction requires deformation of crystals by either dissolution-reprecipitation or dislocation creep. There is, as yet, no reported microstructural evidence of extensive, syn-magmatic, internally-generated, viscous deformation in fully solidified silicic plutonic rocks. If subsequent directed searches do not reveal clear evidence for internally-generated buoyancy-driven melt segregation processes, it is likely that other factors, such as rejuvenation by magma replenishment, gas filter-pressing, or externally-imposed stress during regional deformation, are required to segregate large volumes of crystal-poor rhyolitic liquids from crustal mushy zones.

Comparison of settling particles and sediments at IMAGES coring site in the northwestern North Pacific — Effect of resuspended particles on paleorecords

NASA Astrophysics Data System (ADS)

Kawahata, Hodaka; Minoshima, Kayo; Ishizaki, Yui; Yamaoka, Kyoko; Gupta, Lallan P.; Nagao, Masayuki; Kuroyanagi, Azumi

2009-12-01

In order to understand settling process of particles in high sedimentation area, one mooring of sediment trap was deployed right above the IMAGES coring site in the northwestern North Pacific. In spite of two large maxima of settling particle fluxes in June-July 2002 and October-early January 2003, organic matter (OM) and carbonate showed higher peaks in June-July while lithogenics showed a large peak in October-early January with degraded OM (low aspartic acid/beta-alanine (Asp/Bala) and glutamic acid/gamma-aminobutyric (Glu/Gaba) ratios). Fresh OM production peaked in June-July 2002 and April-May 2003. Thus a large export production occurred in spring-early summer (April-June). Alkenone production was enhanced mainly in June-July. The mean alkenone SST of the settling particles was rather consistent with the observed annual mean SST and alkenone SST determined from the surface sediments. On the other hand, the maximum lithogenic flux along with the degradation of OM indicated that a significant amount of resuspended matter contaminated the bottom sediments. Based upon idealized model, the current and settling speeds make fractionation by size and density of resuspended particles during the settling process. Accumulation rates of lithogenics were ~ 5 times those in the sediment traps, which indicate large contribution of resuspended particles to settling particles especially during October-early January, when the Tsugaru current showed high current speed. These observations call our attention to carefully reconstruct paleo-environments based upon lithogenics and several other proxies such as biogenic silica, which would be biased for example in the record of IMAGES core at Site Shimokita located on the gentle continental slope.

Influence of sludge properties and hydraulic loading on the performance of secondary settling tanks--full-scale operational results.

PubMed

Vestner, R J; Günthert, F Wolfgang

2004-01-01

Full-scale investigations at a WWTP with a two-stage secondary settling tank process revealed relationships between significant operating parameters and performance in terms of effluent suspended solids concentration. Besides common parameters (e.g. surface overflow rate and sludge volume loading rate) feed SS concentration and flocculation time must be considered. Concentration of the return activated sludge may help to estimate the performance of existing secondary settling tanks.

Stochastic Theory for the Clustering of Rapidly Settling, Low-Inertia Particle Pairs in Isotropic Turbulence - II

NASA Astrophysics Data System (ADS)

Rani, Sarma; Gupta, Vijay; Koch, Donald

2017-11-01

A stochastic theory is developed to predict the Radial Distribution Function (RDF) of monodisperse, rapidly settling, low-inertia particle pairs in isotropic turbulence. In the second version of the theory (T2), the dimensionless strain-rate and rotation-rate tensors ``seen'' by the primary particle are assumed to be Gaussian distributed, where the strain-rate and rotation-rate tensors are non-dimensionlized using the instantaneous dissipation rate and enstrophy, respectively. Accordingly, closure is again derived for the drift flux driving particle clustering, in the asympotic limits of Stokes number St =τp /τη << 1 , and settling paramater Sv = gτp /uη >> 1 . Only the drift flux differs for T1 and T2, while the diffusive flux remains the same. The RDFs for rapidly settling pairs again show an inverse power dependency on pair separation r with an exponent, c1, that is proportional to St2 . However, in contrast to T1, the c1 values predicted by T2 show good qualitative and resonable quantitative agreement with the c1 values obtained from DNS of settling particles in isotropic turbulence. Further, the T2-predicted c1 values are smaller than those obtained from DNS of non-settling particles in isotropic turbulence. Funding from the CBET Division of the National Science Foundation is gratefully acknowledged.

Lattice Boltzmann simulations of settling behaviors of irregularly shaped particles

NASA Astrophysics Data System (ADS)

Zhang, Pei; Galindo-Torres, S. A.; Tang, Hongwu; Jin, Guangqiu; Scheuermann, A.; Li, Ling

2016-06-01

We investigated the settling dynamics of irregularly shaped particles in a still fluid under a wide range of conditions with Reynolds numbers Re varying between 1 and 2000, sphericity ϕ and circularity c both greater than 0.5, and Corey shape factor (CSF) less than 1. To simulate the particle settling process, a modified lattice Boltzmann model combined with a turbulence module was adopted. This model was first validated using experimental data for particles of spherical and cubic shapes. For irregularly shaped particles, two different types of settling behaviors were observed prior to particles reaching a steady state: accelerating and accelerating-decelerating, which could be distinguished by a critical CSF value of approximately 0.7. The settling dynamics were analyzed with a focus on the projected areas and angular velocities of particles. It was found that a minor change in the starting projected area, an indicator of the initial particle orientation, would not strongly affect the settling velocity for low Re. Periodic oscillations developed for all simulated particles when Re>100 . The amplitude of these oscillations increased with Re. However, the periods were not sensitive to Re. The critical Re that defined the transition between the steady and periodically oscillating behaviors depended on the inertia tensor. In particular, the maximum eigenvalue of the inertia tensor played a major role in signaling this transition in comparison to the intermediate and minimum eigenvalues.

Effect of particle volume fraction on the settling velocity of volcanic ash particles: insights from joint experimental and numerical simulations

PubMed Central

Del Bello, Elisabetta; Taddeucci, Jacopo; de’ Michieli Vitturi, Mattia; Scarlato, Piergiorgio; Andronico, Daniele; Scollo, Simona; Kueppers, Ulrich; Ricci, Tullio

2017-01-01

Most of the current ash transport and dispersion models neglect particle-fluid (two-way) and particle-fluid plus particle-particle (four-way) reciprocal interactions during particle fallout from volcanic plumes. These interactions, a function of particle concentration in the plume, could play an important role, explaining, for example, discrepancies between observed and modelled ash deposits. Aiming at a more accurate prediction of volcanic ash dispersal and sedimentation, the settling of ash particles at particle volume fractions (ϕp) ranging 10−7-10−3 was performed in laboratory experiments and reproduced by numerical simulations that take into account first the two-way and then the four-way coupling. Results show that the velocity of particles settling together can exceed the velocity of particles settling individually by up to 4 times for ϕp ~ 10−3. Comparisons between experimental and simulation results reveal that, during the sedimentation process, the settling velocity is largely enhanced by particle-fluid interactions but partly hindered by particle-particle interactions with increasing ϕp. Combining the experimental and numerical results, we provide an empirical model allowing correction of the settling velocity of particles of any size, density, and shape, as a function of ϕp. These corrections will impact volcanic plume modelling results as well as remote sensing retrieval techniques for plume parameters. PMID:28045056

Effect of particle volume fraction on the settling velocity of volcanic ash particles: insights from joint experimental and numerical simulations.

PubMed

Del Bello, Elisabetta; Taddeucci, Jacopo; De' Michieli Vitturi, Mattia; Scarlato, Piergiorgio; Andronico, Daniele; Scollo, Simona; Kueppers, Ulrich; Ricci, Tullio

2017-01-03

Most of the current ash transport and dispersion models neglect particle-fluid (two-way) and particle-fluid plus particle-particle (four-way) reciprocal interactions during particle fallout from volcanic plumes. These interactions, a function of particle concentration in the plume, could play an important role, explaining, for example, discrepancies between observed and modelled ash deposits. Aiming at a more accurate prediction of volcanic ash dispersal and sedimentation, the settling of ash particles at particle volume fractions (ϕ p ) ranging 10 -7 -10 -3 was performed in laboratory experiments and reproduced by numerical simulations that take into account first the two-way and then the four-way coupling. Results show that the velocity of particles settling together can exceed the velocity of particles settling individually by up to 4 times for ϕ p  ~ 10 -3 . Comparisons between experimental and simulation results reveal that, during the sedimentation process, the settling velocity is largely enhanced by particle-fluid interactions but partly hindered by particle-particle interactions with increasing ϕ p . Combining the experimental and numerical results, we provide an empirical model allowing correction of the settling velocity of particles of any size, density, and shape, as a function of ϕ p . These corrections will impact volcanic plume modelling results as well as remote sensing retrieval techniques for plume parameters.

Tomato plant and leaf age effects on the probing and settling behavior of Frankliniella fusca and Frankliniella occidentalis (Thysanoptera: Thripidae).

PubMed

Joost, P Houston; Riley, David G

2008-02-01

The effect of tomato, Solanum lycopersicum L., plant and leaf age on the probing and settling behavior of Frankliniella fusca (Hinds) and F. occidentalis (Pergande) was studied using electrical penetration graph technique and whole plant bioassays. Male and female F. fusca probed and ingested more and for longer periods of time on 3- and 4-wk-old plants compared with 6- and 8-wk-old plants. Female F. fusca probed and ingested more frequently than males in the plant age experiment, but not in the leaf age experiment. F. fusca probed and ingested more frequently on 2- and 4-wk-old leaves compared with 1-wk-old leaves. Plant age did not affect the probing frequency or duration of F. occidentalis; however, males probed and ingested longer than females in the plant age experiment and on the oldest leaf in the leaf age experiment. Both thrips species preferred to settle on 3-wk-old plants. F. fusca preferred to settle on 4-wk-old leaves after settling randomly for an hour. F. occidentalis showed no settling preference relative to leaf age. The preference of F. fusca for young plants suggests that this species could attack tomato plants at a very early stage, which is important for understanding its role as a vector in the transmission of Tospovirus in the field.

Sludge settling processes in SBR-related sewage treatment plants according to the Biocos method.

PubMed

Meusel, S; Englert, R

2004-01-01

This paper describes the investigations in a sedimentation and circulation reactor (SU-reactor) of a three-phase Biocos plant. The aim of these investigations was the determination of the temporal and depth-dependent distribution of suspended solid contents, as well as describing the sludge sedimentation curves. The calculated results reveal peculiarities of the Biocos method with regard to sedimentation processes. In the hydraulically uninterrupted (pre-)settling phase, a sludge level depth was observed, which remained constant over the reactor surface and increased linearly according to the sludge volume. The settling and the thickening processes of this phase corresponded to a large extent to the well-known settling test in a one-litre measuring cylinder. During the discharge phase, the investigated settling rate was overlaid by the surface loading rate and the sludge level changed depending on the difference between those two parameters. The solid distribution of the A-phase indicated a formation of functional zones, which were influenced by the surface loading. The formation was comparable to the formation of layers in secondary settling tanks with vertical flow. The concentration equalisation between the biological reactor and the SU-reactor proved to be problematic during the circulation phase, because a type of internal sludge circulation occurred in the SU-reactor. A permanent sludge recirculation seems to be highly recommendable.

Origin of accelerated and hindered sedimentation of two particles in wet foam.

PubMed

Jing, Zefeng; Feng, Chenchen; Wang, Shuzhong; Xu, Donghai

2018-03-20

To explore the origin of interactional settling behaviors of multi-particles in wet foam, the sedimentation of two particles placed one above the other as well as placed side by side is studied. According to the average settling velocity in experiment and the average settling drag force of the two particles in numerical simulation, we show that the particles display accelerated sedimentation as placed one above the other while they display hindered sedimentation in the case of the ones positioned side by side. Furthermore, the evolution of structure and force parameters of the bubbles, such as T1 topological events, displacement vector and principal stress fields, shows that the reciprocal action between the foam and the settling particles placed side by side is more significant. The different levels of interplay for these two settling cases also give rise to the diverse changes of bubble pressure response. The bubble pressure component of the average drag force is higher for the particles placed side by side. Especially, for the first time, it reveals that these interactional sedimentation behaviors in the foam are mainly attributed to the changed pressure of bubbles caused by these settling particles at the mesoscopic level. The present results may suggest potential explanations to the cause of the complex accelerated or hindered sedimentation of more particles in wet foam.

Preparation and characterization of hemoglobin-silver composites as biocompatible antiseptics.

PubMed

Li, Peiyuan; Tong, Zhangfa; Jia, Zhiruo; Su, Wei

2016-11-01

Microbial contamination has been a major challenge in a wide variety of fields such as biomedical and biomaterial applications. The development of biomaterials that possess excellent antibacterial ability and biocompatibility is of great importance to enhance the service life of biomaterials. In this study, the main protein component of red blood cells, hemoglobin (Hb), was employed to prepare Ag-Hb nanocomposites as novel biocompatible antiseptics. The formation of Ag-Hb nanocomposites on the titanium substrate are confirmed by field-emission scanning electron microscopy, Fourier transformed infrared spectroscopic, contact angles, and inductively coupled plasma atomic emission spectrometry analysis. The Ag-Hb titanium shows potent antibacterial ability against planktonic bacteria in the suspension and ability to prevent bacterial adhesion. Moreover, the Ag-Hb titanium shows excellent biocompatibility, which supports healthy osteoblast cellular activity and osteoblast differentiation. The results indicate that the Ag-Hb nanocomposites can be potentially useful for the fabrication of biomaterials for long-term applications. © The Author(s) 2016.

Coral reef fish larvae settle close to home.

PubMed

Jones, Geoffrey P; Planes, Serge; Thorrold, Simon R

2005-07-26

Population connectivity through larval dispersal is an essential parameter in models of marine population dynamics and the optimal size and spacing of marine reserves. However, there are remarkably few direct estimates of larval dispersal for marine organisms, and the actual birth sites of successful recruits have never been located. Here, we solve the mystery of the natal origin of clownfish (Amphiprion polymnus) juveniles by mass-marking via tetracycline immersion all larvae produced in a population. In addition, we established parentage by DNA genotyping all potential adults and all new recruits arriving in the population. Although no individuals settled into the same anemone as their parents, many settled remarkably close to home. Even though this species has a 9-12 day larval duration, one-third of settled juveniles had returned to a 2 hectare natal area, with many settling <100 m from their birth site. This represents the smallest scale of dispersal known for any marine fish species with a pelagic larval phase. The degree of local retention indicates that marine reserves can provide recruitment benefits not only beyond but also within their boundaries.

Optimization with artificial neural network systems - A mapping principle and a comparison to gradient based methods

NASA Technical Reports Server (NTRS)

Leong, Harrison Monfook

1988-01-01

General formulae for mapping optimization problems into systems of ordinary differential equations associated with artificial neural networks are presented. A comparison is made to optimization using gradient-search methods. The performance measure is the settling time from an initial state to a target state. A simple analytical example illustrates a situation where dynamical systems representing artificial neural network methods would settle faster than those representing gradient-search. Settling time was investigated for a more complicated optimization problem using computer simulations. The problem was a simplified version of a problem in medical imaging: determining loci of cerebral activity from electromagnetic measurements at the scalp. The simulations showed that gradient based systems typically settled 50 to 100 times faster than systems based on current neural network optimization methods.

Fluctuating disturbances in a Mach 5 wind tunnel

NASA Technical Reports Server (NTRS)

Anders, J. B.; Stainback, P. C.; Beckwith, I. E.; Keefe, L. R.

1976-01-01

An experimental investigation has been conducted to determine the source and nature of disturbances in the settling chamber and test section of a Mach 5 wind tunnel. Various changes in the air supply piping to the wind tunnel are shown to influence the disturbance levels in the settling chamber. These levels were reduced by the use of an acoustic muffler section in the settling chamber. Three nozzles were tested with the same settling chamber and hot-wire measurements indicated that the test section disturbances were entirely acoustic. Significant reductions in the test section noise levels were obtained with an electroplated nozzle utilizing boundary-layer removal upstream of the throat. The source of test section noise is shown to be different for laminar and turbulent nozzle-wall boundary layers.

Profile of an excellent nurse manager: identifying and developing health care team leaders.

PubMed

Kallas, Kathryn D

2014-01-01

The purpose of this research was to identify the profile of an excellent nurse manager who can lead effective health care teams. Leadership attributes and competencies that characterize an excellent nurse manager and tools to identify them are lacking in the literature but are required to efficiently and effectively address the growing shortage of registered nurses (RNs) in health care team leadership roles and the critical linkage of these roles to patient outcomes. A profile of an excellent nurse manager was developed on the basis of the responses of nurse managers across the United States who had been identified as excellent or competent by chief nurse executive assessment or/and the Nurse Manager Ability, Leadership, and Support of Nurses staff survey to the Kouzes and Posner Leadership Practices Inventory: Self Instrument. Statistically significant distinctions exist between nurse managers who are excellent and those who are competent as assessed by the Five Practices of Exemplary Leadership, which together comprise the profile of an excellent nurse manager. The Kouzes and Posner Leadership Practices Inventory: Self Instrument can be used to identify, recruit, and develop RNs in the nurse manager role as excellent leaders of effective health care teams.

Dust to planetesimals - Settling and coagulation in the solar nebula

NASA Technical Reports Server (NTRS)

Weidenschilling, S. J.

1980-01-01

The behavior of solid particles in a low-mass solar nebula during settling to the central plane and the formation of planetesimals is discussed. The gravitational instability in a dust layer and collisional accretion are examined as possible mechanisms of planetesimal formation. The shear between the gas and a dust layer is considered along with the differences in the planetesimal formation mechanisms between the inner and outer nebula. A numerical model for computing simultaneous coagulation and settling is described.

Environmental effects of dredging. Documentation of the settle module for ADDAMS: Design of confined disposal facilities for solids retention and initial storage. Technical notes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hayes, D.F.; Schroeder, P.R.

This technical note documents the SETTLE computer program which facilitates the design of a confined disposal facility (CDF) to retain solids, provide initial storage, and meet effluent discharge limitations for suspended solids during a dredged matenal disposal operation. Detailed information can be found in Engineer Manual 1110-2-5027, Confined Dredged Material Disposal. SETTLE is a part of the Automated Dredging and Disposal Alternatives Management System (ADDAMS).

The Effects of Mathematical Modeling on Creative Production Ability and Self-Directed Learning Attitude

ERIC Educational Resources Information Center

Kim, Sun Hee; Kim, Soojin

2010-01-01

What should we do to educate the mathematically gifted and how should we do it? In this research, to satisfy diverse mathematical and cognitive demands of the gifted who have excellent learning ability and task tenacity in mathematics, we sought to apply mathematical modeling. One of the objectives of the gifted education in Korea is cultivating…

Fluorescent polymer sensor array for detection and discrimination of explosives in water.

PubMed

Woodka, Marc D; Schnee, Vincent P; Polcha, Michael P

2010-12-01

A fluorescent polymer sensor array (FPSA) was made from commercially available fluorescent polymers coated onto glass beads and was tested to assess the ability of the array to discriminate between different analytes in aqueous solution. The array was challenged with exposures to 17 different analytes, including the explosives trinitrotoluene (TNT), tetryl, and RDX, various explosive-related compounds (ERCs), and nonexplosive electron-withdrawing compounds (EWCs). The array exhibited a natural selectivity toward EWCs, while the non-electron-withdrawing explosive 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) produced no response. Response signatures were visualized by principal component analysis (PCA), and classified by linear discriminant analysis (LDA). RDX produced the same response signature as the sampled blanks and was classified accordingly. The array exhibited excellent discrimination toward all other compounds, with the exception of the isomers of nitrotoluene and aminodinitrotoluene. Of particular note was the ability of the array to discriminate between the three isomers of dinitrobenzene. The natural selectivity of the FPSA toward EWCs, plus the ability of the FPSA to discriminate between different EWCs, could be used to design a sensor with a low false alarm rate and an excellent ability to discriminate between explosives and explosive-related compounds.

Experimental investigation of gravity effects on sediment sorting on Mars

NASA Astrophysics Data System (ADS)

Kuhn, Nikolaus J.; Kuhn, Brigitte; Gartmann, Andres

2016-04-01

Introduction: Sorting of sedimentary rocks is a proxy for the environmental conditions at the time of deposition, in particular the runoff that moved and deposited the material forming the rocks. Settling of sediment in water is strongly influenced by the gravity of a planetary body. As a consequence, sorting of a sedimentary rock varies with gravity for a given depth and velocity of surface runoff. Theoretical considerations for spheres indicate that sorting is more uniform on Mars than on Earth for runoff of identical depth. In reality, such considerations have to be applied with great caution because the shape of a particle strongly influences drag. Drag itself can only be calculated directly for an irregularly shaped particle with great computational effort, if at all. Therefore, even for terrestrial applications, sediment settling velocities are often determined directly, e.g. by measurements using settling tubes. Experiments: In this study the results of settling tube tests conducted under reduced gravity during three Mars Sedimentation Experiment (MarsSedEx I, II and III) flights, conducted between 2012 and 2015, are presented. Ten types of sediment, ranging in size, shape and density were tested in custom-designed settling tubes during parabolas of Martian gravity lasting 20 to 25 seconds. Results: The experiments conducted during the MarsSedEx reduced gravity experiments showed that the violation of fluid dynamics caused by using empirical models and parameter values developed for sediment transport on Earth lead to significant miscalculations for Mars, specifically an underetsimation of settling velcoity because of an overestimation of turbulant drag. The error is caused by the flawed representation of particle drag on Mars. Drag coefficients are not a property of a sediment particle, but a property of the flow around the particle, and thus strongly affected by gravity. Conlcusions: The observed errors in settling velocity when using terrestrial models and parameter values on Mars have implications for sediment movement and sorting, in particular for sandstones and conglomerates, and thus analogies drawn between Earth and Mars. Most significantly, sorting on Mars is less pronounced for given flow conditions than on Earth. References: [1] Kuhn N. J. (2014) Experiments in Reduced Gravity - Sediment Settling on Mars, Elsevier.

Settling Velocity Specific SOC Distribution along Hillslopes - A field investigation in Denmark

NASA Astrophysics Data System (ADS)

Kuhn, N. J.; Hu, Y.

2015-12-01

The net effects of soil erosion by water, as a sink or source of atmospheric CO2, are decisively affected by the spatial re-distribution and stability of eroded soil organic carbon (SOC). The deposition position of eroded SOC, into terrestrial or aquatic systems, is actually decided by the transport distances of soil fractions where the SOC is stored. In theory, the transport distances of aggregated soil fractions are related to their settling velocities under given layer conditions. Yet, little field investigation has been conducted to examine the actual movement of eroded soil fractions along hillslopes, let alone the re-distribution pattern of functional SOC fractions. Eroding sandy soils and sediment were sampled after a series of rainfall events from different topographic positions along a slope on a freshly seeded cropland in Jutland, Denmark. All the soil samples from difference topographic positions along the slope were fractionated into five settling classes using a settling tube apparatus. The SOC content, 13C signature, and C:N ratios of all settling fractions were measured. Our results show that: 1) the spatial distribution of soil settling classes along the slope clearly shows a coarsening effect at the deposition area immediately below the eroding slope, followed by a fining trend on the deposition area at the slope tail. This proves the validity of the conceptual model in Starr et al. 2000 to predict SOC redistribution patterns along eroding hillslopes. 2) The isotopically enriched 13C on the slope back suggests greater decomposition rates possibly experienced by eroded SOC during transport, while the pronounced respiration rates at the slope tail indicate a great potential of CO2 emissions after deposition. Overall, our results illustrate that immediate deposition of fast settling soil fractions, and the thus induced preferential deposition of SOC at foot slope and potential CO2 emissions during transport, must be appropriately accounted for in current soil carbon balances. To achieve this, a SOC erodibility parameter based on the actual settling velocity distribution of eroded fractions (aggregated or not aggregated) is urgently needed to better parameterize soil erosion models with respect to SOC spatial redistribution.

Stratified settlement and moulting competency of brachyuran megalopae in Ponta Rasa mangrove swamp, Inhaca Island (Mozambique)

NASA Astrophysics Data System (ADS)

Paula, J.; Dornelas, M.; Flores, A. A. V.

2003-02-01

Information on recruitment processes of mangrove crustaceans is very limited, in spite of the great importance of these environments for the coastal zone. This study describes the settlement patterns of brachyuran crabs at Ponta Rasa mangrove swamp, Inhaca Island, in order to assess if settlement patterns reflect adult distribution. Hoghair filter collectors were deployed at different strata within the mangrove, and at the adjacent intertidal flat as control. Sampling was conducted daily for a period of 82 days. The collected megalopae were reared in the laboratory to assess their moulting competency and to enable identification. Settlement intensity was tested for association with wind stress, from different directions and averaged over time lags up to 6 days. A total of 960 megalopae settled during this study. Only 8% of the megalopae that settled at the control site belonged to mangrove dwelling species. Settlers inside Ponta Rasa swamp were exclusively mangrove species. Ilyograpsus paludicola settled mainly among Rhizophora mucronata and the mixed area of Ceriops tagal and Bruguiera gymnorrhiza, where adults occur, and Perisesarma guttatum, the most abundant sesarmid at Ponta Rasa, settled mainly at the creek. Neosarmatium meinerti settled among Avicennia marina pnematophores, very close to the adult populations. Megalopae of mangrove taxa that settled outside the mangrove took longer to moult than the ones settling inside the swamp. In the intertidal areas of the mangrove, settlers took an average of 1-2 days to moult, whereas in subtidal areas time to moult was on an average 3-5 days. Thus, both distribution of settlers and moulting competency suggest that settling follows adult distribution. Tides have a strong influence on settlement at Ponta Rasa, with the effect that, due to the high sill at the entrance, neap tides do not penetrate the mangrove. The analysis of settlement data suggested a significant effect of wind-driven transport on onshore migration. There is however no obvious interpretation for the pattern observed. Probably, the distribution of different larval patches and the complex dynamic structure of currents within Maputo Bay and adjacent areas influence the settlement pattern.

First genealogy for a wild marine fish population reveals multigenerational philopatry.

PubMed

Salles, Océane C; Pujol, Benoit; Maynard, Jeffrey A; Almany, Glenn R; Berumen, Michael L; Jones, Geoffrey P; Saenz-Agudelo, Pablo; Srinivasan, Maya; Thorrold, Simon R; Planes, Serge

2016-11-15

Natal philopatry, the return of individuals to their natal area for reproduction, has advantages and disadvantages for animal populations. Natal philopatry may generate local genetic adaptation, but it may also increase the probability of inbreeding that can compromise persistence. Although natal philopatry is well documented in anadromous fishes, marine fish may also return to their birth site to spawn. How philopatry shapes wild fish populations is, however, unclear because it requires constructing multigenerational pedigrees that are currently lacking for marine fishes. Here we present the first multigenerational pedigree for a marine fish population by repeatedly genotyping all individuals in a population of the orange clownfish (Amphiprion percula) at Kimbe Island (Papua New Guinea) during a 10-y period. Based on 2927 individuals, our pedigree analysis revealed that longitudinal philopatry was recurrent over five generations. Progeny tended to settle close to their parents, with related individuals often sharing the same colony. However, successful inbreeding was rare, and genetic diversity remained high, suggesting occasional inbreeding does not impair local population persistence. Local reproductive success was dependent on the habitat larvae settled into, rather than the habitat they came from. Our study suggests that longitudinal philopatry can influence both population replenishment and local adaptation of marine fishes. Resolving multigenerational pedigrees during a relatively short period, as we present here, provides a framework for assessing the ability of marine populations to persist and adapt to accelerating climate change.

First genealogy for a wild marine fish population reveals multigenerational philopatry

PubMed Central

Salles, Océane C.; Pujol, Benoit; Maynard, Jeffrey A.; Almany, Glenn R.; Berumen, Michael L.; Jones, Geoffrey P.; Saenz-Agudelo, Pablo; Srinivasan, Maya; Thorrold, Simon R.; Planes, Serge

2016-01-01

Natal philopatry, the return of individuals to their natal area for reproduction, has advantages and disadvantages for animal populations. Natal philopatry may generate local genetic adaptation, but it may also increase the probability of inbreeding that can compromise persistence. Although natal philopatry is well documented in anadromous fishes, marine fish may also return to their birth site to spawn. How philopatry shapes wild fish populations is, however, unclear because it requires constructing multigenerational pedigrees that are currently lacking for marine fishes. Here we present the first multigenerational pedigree for a marine fish population by repeatedly genotyping all individuals in a population of the orange clownfish (Amphiprion percula) at Kimbe Island (Papua New Guinea) during a 10-y period. Based on 2927 individuals, our pedigree analysis revealed that longitudinal philopatry was recurrent over five generations. Progeny tended to settle close to their parents, with related individuals often sharing the same colony. However, successful inbreeding was rare, and genetic diversity remained high, suggesting occasional inbreeding does not impair local population persistence. Local reproductive success was dependent on the habitat larvae settled into, rather than the habitat they came from. Our study suggests that longitudinal philopatry can influence both population replenishment and local adaptation of marine fishes. Resolving multigenerational pedigrees during a relatively short period, as we present here, provides a framework for assessing the ability of marine populations to persist and adapt to accelerating climate change. PMID:27799530

Species coexistence and the superior ability of an invasive species to exploit a facilitation cascade habitat.

PubMed

Altieri, Andrew H; Irving, Andrew D

2017-01-01

Facilitation cascades generated by co-occurring foundation species can enhance the abundance and diversity of associated organisms. However, it remains poorly understood how differences among native and invasive species in their ability to exploit these positive interactions contribute to emergent patterns of community structure and biotic acceptance. On intertidal shorelines in New England, we examined the patterns of coexistence between the native mud crabs and the invasive Asian shore crab in and out of a facilitation cascade habitat generated by mid intertidal cordgrass and ribbed mussels. These crab species co-occurred in low intertidal cobbles adjacent to the cordgrass-mussel beds, despite experimental findings that the dominant mud crabs can kill and displace Asian shore crabs and thereby limit their successful recruitment to their shared habitat. A difference between the native and invasive species in their utilization of the facilitation cascade likely contributes to this pattern. Only the Asian shore crabs inhabit the cordgrass-mussel beds, despite experimental evidence that both species can similarly benefit from stress amelioration in the beds. Moreover, only Asian shore crabs settle in the beds, which function as a nursery habitat free of lethal mud crabs, and where their recruitment rates are particularly high (nearly an order of magnitude higher than outside beds). Persistence of invasive adult Asian shore crabs among the dominant native mud crabs in the low cobble zone is likely enhanced by a spillover effect of the facilitation cascade in which recruitment-limited Asian shore crabs settle in the mid intertidal cordgrass-mussel beds and subsidize their vulnerable populations in the adjacent low cobble zone. This would explain why the abundances of Asian shore crabs in cobbles are doubled when adjacent to facilitation cascade habitats. The propensity for this exotic species to utilize habitats created by facilitation cascades, despite the lack of a shared evolutionary history, contributes to species coexistence and the acceptance of invasives into a diverse community.

Effects of temperature and dissolved oxygen on sludge properties and their role in bioflocculation and settling.

PubMed

Liao, B Q; Lin, H J; Langevin, S P; Gao, W J; Leppard, G G

2011-01-01

Effects of temperature (mesophilic (35 °C) vs. thermophilic (55 °C)) and dissolved oxygen (DO) concentration (under thermophilic conditions) on sludge properties and their role in bioflocculation and settling were studied using well-controlled sequencing batch reactors fed with a synthetic wastewater comprised of glucose and inorganic nutrients. Under a similar DO level, thermophilic sludge had a poorer bioflocculating ability and settleability than that of mesophilic sludge. Under a thermophilic condition, an increase in DO level led to a poorer settleability and a slightly improved bioflocculating ability. A poorer settleability was related to a higher level of filaments. Analysis of bound extracellular polymeric substances (EPS) indicates that thermophilic sludge had a higher level of total bound EPS content than that of mesophilic sludge under a similar DO level, and an increase in DO resulted in an increase in total bound EPS content in thermophilic sludge. Surface analysis of sludge by X-ray photoelectron spectroscopy (XPS) suggests that significant differences in the surface concentrations of elements N, C, O were observed between thermophilic and mesophilic sludge, implying significant differences in bound EPS composition. The results of gel permeation chromatography indicate that the weight-averaged molecular weight (M(w)) of bound EPS covered a range of 1159 Da to 13220 Da. The distribution of EPS "species" at floc surfaces was shown by transmission electron microscopy (TEM) to be uneven; different kinds of nanoscale materials were distributed in a patchy manner at the floc-water interface. The results suggest that it is the role of specific EPS molecules rather than the quantity of bound EPS that determine the difference in bioflocculation behavior between thermophilic and mesophilic sludge. The strategy of increasing the DO level could not solve the biomass separation problems associated with thermophilic sludge. Copyright © 2010 Elsevier Ltd. All rights reserved.

Species coexistence and the superior ability of an invasive species to exploit a facilitation cascade habitat

PubMed Central

Irving, Andrew D.

2017-01-01

Facilitation cascades generated by co-occurring foundation species can enhance the abundance and diversity of associated organisms. However, it remains poorly understood how differences among native and invasive species in their ability to exploit these positive interactions contribute to emergent patterns of community structure and biotic acceptance. On intertidal shorelines in New England, we examined the patterns of coexistence between the native mud crabs and the invasive Asian shore crab in and out of a facilitation cascade habitat generated by mid intertidal cordgrass and ribbed mussels. These crab species co-occurred in low intertidal cobbles adjacent to the cordgrass–mussel beds, despite experimental findings that the dominant mud crabs can kill and displace Asian shore crabs and thereby limit their successful recruitment to their shared habitat. A difference between the native and invasive species in their utilization of the facilitation cascade likely contributes to this pattern. Only the Asian shore crabs inhabit the cordgrass–mussel beds, despite experimental evidence that both species can similarly benefit from stress amelioration in the beds. Moreover, only Asian shore crabs settle in the beds, which function as a nursery habitat free of lethal mud crabs, and where their recruitment rates are particularly high (nearly an order of magnitude higher than outside beds). Persistence of invasive adult Asian shore crabs among the dominant native mud crabs in the low cobble zone is likely enhanced by a spillover effect of the facilitation cascade in which recruitment-limited Asian shore crabs settle in the mid intertidal cordgrass–mussel beds and subsidize their vulnerable populations in the adjacent low cobble zone. This would explain why the abundances of Asian shore crabs in cobbles are doubled when adjacent to facilitation cascade habitats. The propensity for this exotic species to utilize habitats created by facilitation cascades, despite the lack of a shared evolutionary history, contributes to species coexistence and the acceptance of invasives into a diverse community. PMID:28243523

18. VIEW OF SETTLING BASIN FROM UPSTREAM TRESTLE, SHOWING BULKHEAD ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

18. VIEW OF SETTLING BASIN FROM UPSTREAM TRESTLE, SHOWING BULKHEAD ON RIGHT AND SAND BANK ON LEFT, LOOKING NORTHWEST - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA

14. INSIDE VIEW OF FLUME, LOOKING DOWNSTREAM TOWARD SETTLING BASIN, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. INSIDE VIEW OF FLUME, LOOKING DOWNSTREAM TOWARD SETTLING BASIN, SHOWING RIGHT FORK TO BYPASS, LEFT FORK TO BASIN - Electron Hydroelectric Project, Along Puyallup River, Electron, Pierce County, WA

[Management abilities of the head surgeon: essential for survival!].

PubMed

Jähne, J

2012-04-01

Due to increased economic challenges in the management of hospitals head surgeons do not only need excellent surgical expertise but also significant management qualities. The personality of head surgeons should include authenticity, sincerity, fairness and the ability to cooperate. Visionary leadership, strategic thinking and strategic management of the personnel are further prerequisites for success. Besides good abilities in communication head surgeons need knowledge of the operating figures for interpretation. To keep up with the own capabilities time and self-management is essential. A survival as head surgeon is likely if these qualities and abilities exist.

New perspectives on the passive treatment of ferruginous circumneutral mine waters in the UK.

PubMed

Sapsford, D J

2013-11-01

This paper examines major physico-chemical processes during the passive treatment of ferruginous circumneutral drainage from abandoned coal mines in the UK. Data collected over several years of studies on mine water treatment systems shed new light on the relative importance of hydraulics, settling velocity, Fe(II) oxidation rates and cascade aeration, which, in turn, informs the design of future systems. This paper demonstrates that (1) the complex settling behaviour of Fe(III) precipitates may be described by a first-order volumetric process and that settling rate is different for different mine waters; (2) the hydraulic efficiency (ratio of time to peak tracer concentration to nominal residence time) of the settling ponds studied was widely variable at low flow rates in comparison to constructed wetlands; (3) aeration cascades contribute dissolved oxygen and lead to a rise in pH due to CO2 degassing, which are very important in reducing the required time for iron oxidation and removal; (4) for at least 10 of the 30 sites examined, modelling of the rates of Fe(II) oxidation and particulate settling reveals that removal of iron is primarily dependent on settling rate; and (5) that substantial increases in pH can be brought about by forced aeration of mine water over several hours. Findings of this study apply to the majority of coal mine water treatment sites in the UK and may have broader application to other ferruginous waters with circumneutral pH or after treatment to increase pH.

Factors controlling floc settling velocity along a longitudinal estuarine transect

USGS Publications Warehouse

Manning, A.J.; Schoellhamer, D.H.

2013-01-01

A 147 km longitudinal transect of flocculated cohesive sediment properties in San Francisco Bay (SFB) was conducted on June 17th, 2008. Our aim was to determine the factors that control floc settling velocity along the longitudinal axis of the estuary. The INSSEV-LF video system was used to measure floc diameters and settling velocities at 30 stations at a distance of 0.7 m above the estuary bed. Floc sizes (D) ranged from 22 μm to 639 μm and settling velocities (Ws) ranged between 0.04 mm·s− 1 and 15.8 mm·s− 1 during the longitudinal transect. Nearbed turbulent shear stresses throughout the transect duration were within the 0.2–0.5 Pa range which typically stimulates flocculation growth. The individual D–Ws–floc density plots suggest the suspended sediments encountered throughout SFB were composed of both muddy cohesive sediment and mixed sediments flocs. Mass-weighted population mean settling velocity (Wsmass) ranged from 0.5 mm·s− 1 to 10 mm·s− 1. The macrofloc and microfloc (demarcation at 160 μm) sub-populations demonstrated parameterised settling velocities which spanned nearly double the range of the sample mean settling velocities (Wsmean). The macroflocs tended to dominate the suspended mass (up to 77% of the ambient suspended solid concentration; SSC) from San Pablo Bay to Carquinez Strait (the vicinity of the turbidity maximum zone). Microfloc mass was particularly significant (typically 60–100% of the SSC) in the northern section of South Bay and most of Central Bay. The transect took eleven hours to complete and was not fully synoptic. During slack tide, larger and faster settling flocs deposited, accounting for most of the longitudinal variability. The best single predictor of settling velocity was water velocity 39 min prior to sampling, not suspended-sediment concentration or salinity. Resuspension and settling lags are likely responsible for the lagged response of settling velocity to water velocity. The distribution of individual floc diameters and settling velocities indicates that floc density for a given floc diameter varies greatly. A small portion (a few percent) of suspended sediment mass in SFB is sand-sized and inclusion of sand in flocs appears likely. Fractal theory for cohesive sediment assumes that there is a single primary particle size that flocculates, which is not the case for these types of mixed sediment flocs. The wide variability in the physical, biological and chemical processes which contribute to flocculation within SFB means that spatial floc data is required in order to accurately represent the diverse floc dynamics present in the Bay system. The importance in determining accurate estimates of floc density has been highlighted by the SFB data, as these provide the basis for realistic distributions of floc dry mass and the mass settling flux across a floc population. However, although video floc sampling devices can produce the various floc property trends observed in SFB, good survey practice is still paramount. One can see that if the sampling coverage (i.e. data collection frequency) is poor, this could lead to potential mis-interpretations of the data and only limited conclusions may be drawn from such a restricted survey. For example, a limited survey (i.e. only 3 stations, compared to the 10 stations in the full survey) in South Bay produces an under-estimate in both the macrofloc SSCmacro distribution by a factor of four and the Wsmacro by a factor of two. To develop sediment transport numerical models for SFB, high quality floc size and settling data are needed to understand and simulate the depositional qualities of both suspended cohesive sediment and mixed sediments in San Francisco Bay. This study has shown that the most pragmatic solution is a physically-based approach, whereby the detailed flocs D vs. Ws spectra are parameterised in terms of their macrofloc and microfloc properties. This aids in model calibration, whilst retaining more of the dynamical aspects of the floc populations. All forms of flocculation are dynamically active processes, therefore it is important to also include both SSC and turbulence functions together with the floc data.

Bioactive bredigite coating with improved bonding strength, rapid apatite mineralization and excellent cytocompatibility.

PubMed

Yi, Deliang; Wu, Chengtie; Ma, Bing; Ji, Heng; Zheng, Xuebin; Chang, Jiang

2014-05-01

Previous studies have shown that bredigite (Ca7MgSi4O16) bioceramics possessed excellent biocompatibility, apatite-mineralization ability and mechanical properties. In this paper, the bredigite coating on Ti-6Al-4 V substrate was prepared by plasma spraying technique. The main compositions of the coating were bredigite crystal phase with small parts of amorphous phases. The bonding strength of the coating to Ti-6Al-4 V substrate reached 49.8 MPa, which was significantly higher than that of hydroxyapatite coating and other silicate-based bioceramic coatings prepared by same method. After immersed in simulated body fluid for 2 days, a distinct apatite layer was deposited on the surface of bredigite coating, indicating that the prepared bredigite coating has excellent apatite-mineralization ability. The prepared bredigite coating supported the attachment and proliferation of rabbit bone marrow stem cells. The proliferation level of bone marrow stem cells was significantly higher than that on the hydroxyapatite coating. Our further study showed that the released SiO4 (4-) and Mg(2+) ions from bredigite coating as well as the formed nano-apatite layer on the coating surface might mainly contribute to the improvement of cell proliferation. The results indicated that the bredigite coating may be applied on orthopedic implants due to its excellent bonding strength, apatite mineralization and cytocompatibility.

SPRR WATER SETTLING RESERVOIR. VIEW LOOKING NORTHEAST. INTERSTATE HIGHWAY 8 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

SPRR WATER SETTLING RESERVOIR. VIEW LOOKING NORTHEAST. INTERSTATE HIGHWAY 8 BRIDGE CROSSES THE COLORADO RIVER BEYOND THE RESERVOIR. THE OCEAN-TO-OCEAN HIGHWAY BRIDGE AND THE 1924 SPRR BRIDGE ARE AT THE RIGHT EDGE OF THE IMAGE ABOVE THE INTERSTATE BRIDGE. FORT YUMA IS SEEN BEYOND THE INTERSTATE ON INDIAN HILL IN CALIFORNIA. THE SINGLE AUTO IS PARKED ON THE SITE OF THE SPRR HOTEL. - Southern Pacific Railroad Water Settling Reservoir, Yuma Crossing, south bank of Colorado River at foot of Madison Avenue, Yuma, Yuma County, AZ

Sound and fluctuating disturbance measurements in the settling chamber and test section of a small, Mach 5 wind tunnel

NASA Technical Reports Server (NTRS)

Anders, J. B.; Stainback, P. C.; Beckwith, I. E.; Keefe, L. R.

1975-01-01

Disturbance measurements were made using a hot-wire anemometer and piezoelectric pressure transducers in the settling chamber and free stream of a small Mach 5 wind tunnel. Results from the two instruments are compared and acoustical disturbances in the settling chamber are discussed. The source of the test-section noise is identified as nozzle-wall waviness at low Reynolds numbers and as eddy-Mach-wave radiation from the turbulent boundary layer on the nozzle wall at high Reynolds numbers.

Distinctive role of income in the all-cause mortality among working age migrants and the settled population in Finland: A follow-up study from 2001 to 2014.

PubMed

Patel, Kishan; Kouvonen, Anne; Koskinen, Aki; Kokkinen, Lauri; Donnelly, Michael; O'Reilly, Dermot; Vaananen, Ari

2018-03-01

Although income level may play a significant part in mortality among migrants, previous research has not focused on the relationship between income, migration and mortality risk. The aim of this register study was to compare all-cause mortality by income level between different migrant groups and the majority settled population of Finland. A random sample was drawn of 1,058,391 working age people (age range 18-64 years; 50.4% men) living in Finland in 2000 and linked to mortality data from 2001 to 2014. The data were obtained from Statistics Finland. Cox proportional hazards models were used to investigate the association between region of origin and all-cause mortality in low- and high-income groups. The risk for all-cause mortality was significantly lower among migrants than among the settled majority population (hazards ratio (HR) 0.57; 95% confidence interval (CI) 0.53-0.62). After adjustment for age, sex, marital status, employment status and personal income, the risk of mortality was significantly reduced for low-income migrants compared with the settled majority population with a low income level (HR 0.46; 95% CI 0.42-0.50) and for high-income migrants compared with the high-income settled majority (HR 0.81; 95% CI 0.69-0.95). Results comparing individual high-income migrant groups and the settled population were not significant. Low-income migrants from Africa, the Middle East and Asia had the lowest mortality risk of any migrant group studied (HR 0.32; 95% CI 0.27-0.39). Particularly low-income migrants seem to display a survival advantage compared with the corresponding income group in the settled majority population. Downward social mobility, differences in health-related lifestyles and the healthy migrant effect may explain this phenomenon.

A numerical investigation of fine sediment resuspension in the wave boundary layer - effect of hindered settling and bedforms

NASA Astrophysics Data System (ADS)

Hsu, T. J.; Cheng, Z.; Yu, X.

2016-02-01

The wave bottom boundary layer is a major conduit delivering fine terrestrial sediments to the continental margin. Hence, studying the fine sediment resuspension in the wave boundary layer is crucial to the understanding of various components of the earth system, such as carbon cycle. By assuming the settling velocity to be a constant in each simulation, previous turbulence-resolving numerical simulations reveal the existence of three transport modes in the wave boundary layer associated with the sediment availability. As the sediment availability and hence the sediment-induced stable stratification increase, a sequence of transport modes, namely, (I) well-mixed transport, (II) formulation of lutocline resembling a two-layer system, and (III) completely laminarized transport are observed. In general, the settling velocity is a flow variable due to the floc dynamics and hindered settling. This study further investigate the effect of hindered settling. Particularly, for flocs with lower gelling concentrations, the hindered settling effect can play a key role in sustaining large amount of suspended sediment load and results in the laminarized transport (III). For the simulation with a very significant hindered settling effect due to a low gelling concentration, results also indicate the occurrence of gelling ignition, a state in which the erosion rate is always higher than the deposition rate. A condition for the occurrence of gelling ignition is proposed for a range of wave intensities as a function of sediment/floc properties and erodibility parameters. These aforementioned studies are limited to fine sediment transport over a flat bed. However, recent field and laboratory observation show that a small amount of sand fraction can lead to the formation of small bedforms, which can armor the bed while in the meantime enhance near bed turbulence. Preliminary investigation on the effect of bedforms on the resulting transport modes will also be presented.

NLO Higgs+jet at Large Transverse Momenta Including Top Quark Mass Effects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neumann, Tobias

We present a next-to-leading order calculation of H+jet in gluon fusion including the effect of a finite top quark massmore » $$m_t$$ at large transverse momenta. Using the recently published two-loop amplitudes in the high energy expansion and our previous setup that includes finite $$m_t$$ effects in a low energy expansion, we are able to obtain $$m_t$$-finite results for transverse momenta below 225 GeV and above 500 GeV with negligible remaining top quark mass uncertainty. The only remaining region that has to rely on the common leading order rescaling approach is the threshold region $$\\sqrt{\\hat s}\\simeq 2m_t$$. We demonstrate that this rescaling provides an excellent approximation in the high $$p_T$$ region. Our calculation settles the issue of top quark mass effects at large transverse momenta. It is implemented in the parton level Monte Carlo code MCFM and is publicly available immediately in version 8.2.« less

Ultra-lightweight and highly porous carbon aerogels from bamboo pulp fibers as an effective sorbent for water treatment

NASA Astrophysics Data System (ADS)

Yuan, Wei; Zhang, Xiaofang; Zhao, Jiangqi; Li, Qingye; Ao, Chenghong; Xia, Tian; Zhang, Wei; Lu, Canhui

Sorbents derived from biomass provide a novel approach to settle issues of organic solvent and/or oil leakage. In this work, a novel carbon aerogel (CA) was prepared as sorbents using the cheap and abundant bamboo pulp fibers as precursors through the pyrolysis method. The CA displayed an ultra-low density (5.65 mg cm-3), high hydrophobicity (water contact angle of 135.9°) and a large specific surface area (379.39 m2 g-1) as well as great mechanical properties. The absorption capacities of CA for organic solvents/oils were extraordinary (50-150 g/g). Particularly, its absorption on organic solvents was superior to many other bio-based CAs. The reusability of CA was also found impressive. For over five absorption-desorption cycles, the CA still showed excellent absorption behaviors on organic solvents and oils. Importantly, the fabrication process of CA is quite simple and environmentally friendly, demonstrating high potentials for future water treatment applications.

Performance of aerobic nitrite granules treating an anaerobic pre-treated wastewater originating from the potato industry.

PubMed

Dobbeleers, Thomas; Daens, Dominique; Miele, Solange; D'aes, Jolien; Caluwé, Michel; Geuens, Luc; Dries, Jan

2017-02-01

In this study nitrogen removal via nitrite >80% was achieved after approximately 80days in a sequencing batch reactor (SBR) treating pre-treated industrial wastewater originating from the potato industry. Thereafter, SBR performance was investigated during the formation of aerobic nitrite granules (ANG). The first granules appeared after 26days leading to full granulation after 64days. ANG showed excellent settling properties, as the Sludge Volume Index (SVI) went down to 16mL/g and a SVI 10 /SVI 30 =1 was obtained. qPCR analysis showed that slow growing organisms, especially polyphosphate accumulating organisms (PAO) were stimulated by an anaerobic feeding strategy. The average nitrogen removal was 95.3% over the entire operational period, and it mainly followed the "nitrite-route". Moreover, with ANG also phosphorus removal efficiencies up to 65.7% could be achieved. However, it has to be mentioned that nitrous oxide was an important denitrification product, which implies some environmental concerns. Copyright © 2016 Elsevier Ltd. All rights reserved.

Characterization and Delivery of Hanford High-Level Radioactive Waste Slurry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thien, Michael G.; Denslow, Kayte M.; Lee, K. P.

2014-11-15

Two primary challenges to characterizing Hanford’s high-level radioactive waste slurry prior to transfer to a treatment facility are the ability to representatively sample million-gallon tanks and to estimate the critical velocity of the complex slurry. Washington River Protection Solutions has successfully demonstrated a sampling concept that minimizes sample errors by collecting multiple sample increments from a sample loop where the mixed tank contents are recirculated. Pacific Northwest National Laboratory has developed and demonstrated an ultrasonic-based Pulse-Echo detection device that is capable of detecting a stationary settled bed of solids in a pipe with flowing slurry. These two concepts are essentialmore » elements of a feed delivery strategy that drives the Hanford clean-up mission.« less

Rheology and TIC/TOC results of ORNL tank samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pareizs, J. M.; Hansen, E. K.

2013-04-26

The Savannah River National Laboratory (SRNL)) was requested by Oak Ridge National Laboratory (ORNL) to perform total inorganic carbon (TIC), total organic carbon (TOC), and rheological measurements for several Oak Ridge tank samples. As received slurry samples were diluted and submitted to SRNL-Analytical for TIC and TOC analyses. Settled solids yield stress (also known as settled shear strength) of the as received settled sludge samples were determined using the vane method and these measurements were obtained 24 hours after the samples were allowed to settled undisturbed. Rheological or flow properties (Bingham Plastic viscosity and Bingham Plastic yield stress) were determinedmore » from flow curves of the homogenized or well mixed samples. Other targeted total suspended solids (TSS) concentrations samples were also analyzed for flow properties and these samples were obtained by diluting the as-received sample with de-ionized (DI) water.« less

Characterization of Settled Atmospheric Dust by the DART Experiment

NASA Technical Reports Server (NTRS)

Landis, Geoffrey A.; Jenkins, Phillip P.; Baraona, Cosmo

1999-01-01

The DART ("Dust Accumulation and Removal Test") package is an experiment which will fly as part of the MIP experiment on the Mars-2001 Surveyor Lander. Dust deposition could be a significant problem for photovoltaic array operation for long duration emissions on the surface of Mars. Measurements made by Pathfinder showed 0.3% loss of solar array performance per day due to dust obscuration. The DART experiment is designed to quantify dust deposition from the Mars atmosphere, measure the properties of settled dust, measure the effect of dust deposition on the array performance, and test several methods of mitigating the effect of settled dust on a solar array. Although the purpose of DART (along with its sister experiment, MATE) is to gather information critical to the design of future power systems on the surface of Mars, the dust characterization instrumentation on DART will also provide significant scientific data on the properties of settled atmospheric dust.

The unbearable heaviness of colloids: facts, surprises, and puzzles in sedimentation

NASA Astrophysics Data System (ADS)

Piazza, Roberto; Buzzaccaro, Stefano; Secchi, Eleonora

2012-07-01

Sedimentation has played a key role in the development of colloid science. In fact, it is because of the celebrated experiments by Perrin, yielding a concrete demonstration of molecular reality and giving strong support to Einstein’s theory of Brownian motion, that colloids enter the realm of basic physics. Subsequent investigations have shown that a lot more can be learnt both from sedimentation equilibrium and from particle settling dynamics. These advances, together with new experimental approaches, will be reviewed in this paper. Yet, we shall also show that inquiring about gravity settling is far from being a closed matter: for instance, the concept of buoyancy for a settling colloidal mixture is far from being obvious. Moreover, sedimentation holds novel surprises, such as colloidal inflations and settling disasters, showing that a simple external field like gravity may induce mind-boggling, and theoretically challenging effects.

Polymeric efficiency in remove impurities during cottonseed biodiesel production

NASA Astrophysics Data System (ADS)

Lin, H. L.; Liang, Y. H.; Yan, J.; Lin, H. D.; Espinosa, A. R.

2016-07-01

This paper describes a new process for developing biodiesel by polymer from crude cottonseed oil. The study was conducted to examine the effectiveness of the alkali transesterification-flocculation-sedimentation process on fast glycerol and other impurities in the separation from biodiesel by using quaternary polyamine-based cationic polymers SL2700 and polyacylamide cationic polymer SAL1100. The settling velocity of glycerol and other impurities in biodiesel was investigated through settling test experiments; the quality of the biodiesel was investigated by evaluating the viscosity and density. The results revealed that SL2700, SAL1100 and their combination dramatically improved the settling velocity of glycerol and other impurities materials than traditional method. SL 2700 with molecular weight of 0.2 million Da and charge density of 50% then plus SAL1100 with molecular weight of 11 million Da and charge density of 10% induced observable particle aggregation with the best settling performance.

On time discretizations for the simulation of the batch settling-compression process in one dimension.

PubMed

Bürger, Raimund; Diehl, Stefan; Mejías, Camilo

2016-01-01

The main purpose of the recently introduced Bürger-Diehl simulation model for secondary settling tanks was to resolve spatial discretization problems when both hindered settling and the phenomena of compression and dispersion are included. Straightforward time integration unfortunately means long computational times. The next step in the development is to introduce and investigate time-integration methods for more efficient simulations, but where other aspects such as implementation complexity and robustness are equally considered. This is done for batch settling simulations. The key findings are partly a new time-discretization method and partly its comparison with other specially tailored and standard methods. Several advantages and disadvantages for each method are given. One conclusion is that the new linearly implicit method is easier to implement than another one (semi-implicit method), but less efficient based on two types of batch sedimentation tests.

Committee on Science

Science.gov Websites

, articulate and straightforward traits all too rare around this town. He is an excellent manager someone who still being self-deprecating. These, too, are rare abilities, and ones that, frankly, he will need to

Morphological Control of Metal Oxide-Doped Zinc Oxide and Application to Cosmetics

NASA Astrophysics Data System (ADS)

Goto, Takehiro; Yin, Shu; Sato, Tsugio; Tanaka, Takumi

2012-06-01

Zinc oxide shows excellent transparency and ultraviolet radiation shielding ability, and is used for various cosmetics.1-3 However, it possesses high catalytic activity and lower dispersibility. Therefore, spherical particles of zinc oxide have been synthesized by soft solution reaction using zinc nitrate, ethylene glycol, sodium hydroxide and triethanolamine as starting materials. After dissolving these compounds in water, the solution was heated at 90°C for 1 h to form almost mono-dispersed spherical zinc oxide particles. The particle size changed depending on zinc ion concentration, ethylene glycol concentration and so on. Furthermore, with doping some metal ions, the phtocatalytic activity could be decreased. The obtained monodispersed metal ion-doped spherical zinc oxides showed excellent UV shielding ability and low photocatalytic activity. Therefore, they are expected to be used as cosmetics ingredients.

Red mud carbonation using carbon dioxide: Effects of carbonate and calcium ions on goethite surface properties and settling.

PubMed

Liang, Gaojie; Chen, Wenmi; Nguyen, Anh V; Nguyen, Tuan A H

2018-05-01

Carbonation using CO 2 appears as an attractive solution for disposing of red mud suspensions, an aluminum industry hazardous waste since it also offers an option for CO 2 sequestration. Here we report the novel findings that CO 3 2- together with Ca 2+ can significantly affect the surface properties and settling of goethite, a major component of red mud. Specifically, their effects on the goethite surface chemistry, colloidal interaction forces and settling in alkaline solutions are investigated. The surface potential becomes more negative by the formation of carbonate inner-sphere complexes on goethite surface. It is consistent with the strong repulsion, decreased particle size and settling velocity with increased carbonate concentrations as measured by atomic force microscopy, particle size analysis, and particle settling. Adding Ca 2+ that forms outer-sphere complexes with pre-adsorbed carbonate changes goethite surface charge negligibly. Changing repulsion to the attraction between goethite surfaces by increasing calcium dosage indicates the surface bridging, in accordance with the increased settling velocity. The adverse effect of carbonate on goethite flocculation is probably due to its specific chemisorption and competition with flocculants. By forming outer-sphere complexes together with the flocculant-calcium bridging effect, calcium ions can eliminate the negative influence of carbonate and improve the flocculation of goethite particles. These findings contribute to a better understanding of goethite particle interaction with salt ions and flocculants in controlling the particle behavior in the handling processes, including the red mud carbonation. Copyright © 2018 Elsevier Inc. All rights reserved.

Present Kinematic Regime and Recent Seismicity of Gulf Suez, Egypt

NASA Astrophysics Data System (ADS)

Mohamed, G.-E. A.; Abd El-Aal, A. K.

2018-01-01

In this study we computed recent seismicity and present kinematic regime in the northern and middle zones of Gulf of Suez as inferred from moment tensor settlings and focal mechanism of local earthquakes that happened in this region. On 18 and 22 of July, 2014 two moderate size earthquakes of local magnitudes 4.2 and 4.1 struck the northern zone of Gulf of Suez near Suez City. These events are instrumentally recorded by Egyptian National Seismic Network (ENSN). The earthquakes have been felt at Suez City and greater Cairo metropolitan zone while no losses were reported. The source mechanism and source parameters of the calculated events were considered by the near-source waveform data listed at very broadband stations of ENSN and supported by the P-wave polarity data of short period stations. The new settling method and software used deem the action of the source time function, which has been ignored in most of the program series of the moment tensor settling analysis with near source seismograms. The obtained results from settling technique indicate that the estimated seismic moments of both earthquakes are 0.6621E + 15 and 0.4447E + 15 Nm conforming to a moment magnitude Mw 3.8 and 3.7 respectively. The fault plan settlings obtained from both settling technique and polarity of first-arrival indicate the dominance of normal faulting. We also evaluated the stress field in north and middle zones of Gulf of Suez using a multiple inverse method. The prime strain axis shows that the deformation is taken up mainly as stretching in the E-W and NE-SW direction.

Dynamic nature of abutment screw retightening: finite element study of the effect of retightening on the settling effect.

PubMed

Bulaqi, Haddad Arabi; Mousavi Mashhadi, Mahmoud; Safari, Hamed; Samandari, Mohammad Mahdi; Geramipanah, Farideh

2015-05-01

A fundamental problem in fully understanding the dynamic nature of screw loosening is lack of recognition of the entire process of screw tightening and retightening. The purpose of this study was to explain the dynamic nature of abutment screw retightening by using finite element methods to investigate the effect of the coefficient of friction and retightening on the settling effect. Precise computer models were designed of a Straumann dental implant, a directly attached crown, an abutment screw, and the bone surrounding the implant. All threaded interfaces were designed with a spiral thread helix with a specific coefficient of static and kinetic friction, and the surfaces were characterized as fine, regular, and rough. Abaqus software was used for dynamic simulation, which involved applying rotational displacement to the abutment screw and torque controlling during the steps of tightening, relaxation, retightening, and second relaxation and at different coefficients of friction. The obtained torque and preload values were compared to the predicted values. When surfaces changed from fine to rough, the remaining torque and preload decreased, and the settling effect increased. Upon retightening, the remaining torque and preload increased, and the settling effect also decreased. The reduction of the coefficient of friction contributes to increases in the preload and decreases in the settling effect. Retightening reduced the settling effect and had an insignificant effect on the preload. At high coefficients of friction, the retightening effect was intensified. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

2. VIEW LOOKING NORTHWEST AT SETTLING CHAMBER OF 8FOOT HIGH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. VIEW LOOKING NORTHWEST AT SETTLING CHAMBER OF 8-FOOT HIGH SPEED WIND TUNNEL. Jet Lowe, HAER Photographer, December 1995. - NASA Langley Research Center, 8-Foot High Speed Wind Tunnel, 641 Thornell Avenue, Hampton, Hampton, VA

Accessing doctors at times of need-measuring the distance tolerance of rural residents for health-related travel.

PubMed

McGrail, Matthew Richard; Humphreys, John Stirling; Ward, Bernadette

2015-05-29

Poor access to doctors at times of need remains a significant impediment to achieving good health for many rural residents. The two-step floating catchment area (2SFCA) method has emerged as a key tool for measuring healthcare access in rural areas. However, the choice of catchment size, a key component of the 2SFCA method, is problematic because little is known about the distance tolerance of rural residents for health-related travel. Our study sought new evidence to test the hypothesis that residents of sparsely settled rural areas are prepared to travel further than residents of closely settled rural areas when accessing primary health care at times of need. A questionnaire survey of residents in five small rural communities of Victoria and New South Wales in Australia was used. The two outcome measures were current travel time to visit their usual doctor and maximum time prepared to travel to visit a doctor, both for non-emergency care. Kaplan-Meier charts were used to compare the association between increased distance and decreased travel propensity for closely-settled and sparsely-settled areas, and ordinal multivariate regression models tested significance after controlling for health-related travel moderating factors and town clustering. A total of 1079 questionnaires were completed with 363 from residents in closely-settled locations and 716 from residents in sparsely-settled areas. Residents of sparsely-settled communities travel, on average, 10 min further than residents of closely-settled communities (26.3 vs 16.9 min, p < 0.001), though this difference was not significant after controlling for town clustering. Differences were more apparent in terms of maximum time prepared to travel (54.1 vs 31.9 min, p < 0.001). Differences of maximum time remained significant after controlling for demographic and other constraints to access, such as transport availability or difficulties getting doctor appointments, as well as after controlling for town clustering and current travel times. Improved geographical access remains a key issue underpinning health policies designed to improve the provision of rural primary health care services. This study provides empirical evidence that travel behaviour should not be implicitly assumed constant amongst rural populations when modelling access through methods like the 2SFCA.

The nature of excellent clinicians at an academic health science center: a qualitative study.

PubMed

Mahant, Sanjay; Jovcevska, Vesna; Wadhwa, Anupma

2012-12-01

To understand the nature of excellent clinicians at an academic health science center by exploring how and why excellent clinicians achieve high performance. From 2008 to 2010, the authors conducted a qualitative study using a grounded theory approach. Members of the Clinical Advisory Committee in the Department of Pediatrics at the University of Toronto nominated peers whom they saw as excellent clinicians. The authors then conducted in-depth interviews with the most frequently nominated clinicians. They audio-recorded and transcribed the interviews and coded the transcripts to identify emergent themes. From interviews with 13 peer-nominated, excellent clinicians, a model emerged. Dominant themes fell into three categories: (1) core philosophy, (2) deliberate activities, and (3) everyday practice. Excellent clinicians are driven by a core philosophy defined by high intrinsic motivation and passion for patient care and humility. They refine their clinical skills through two deliberate activities-reflective clinical practice and scholarship. Their high performance in everyday practice is characterized by clinical skills and cognitive ability, people skills, engagement, and adaptability. A rich theory emerged explaining how excellent clinicians, driven by a core philosophy and engaged in deliberate activities, achieve high performance in everyday practice. This theory of the nature of excellent clinicians provides a holistic perspective of individual performance, informs medical education, supports faculty career development, and promotes clinical excellence in the culture of academic medicine.

Reliability and Validity of the TIMPSI for Infants With Spinal Muscular Atrophy Type I

PubMed Central

Krosschell, Kristin J.; Maczulski, Jo Anne; Scott, Charles; King, Wendy; Hartman, Jill T.; Case, Laura E.; Viazzo-Trussell, Donata; Wood, Janine; Roman, Carolyn A.; Hecker, Eva; Meffert, Marianne; Léveillé, Maude; Kienitz, Krista; Swoboda, Kathryn J.

2014-01-01

Purpose This study examined the reliability and validity of the Test of Infant Motor Performance Screening Items (TIMPSI) in infants with type I spinal muscular atrophy (SMA). Methods After training, 12 evaluators scored 4 videos of infants with type I SMA to assess interrater reliability. Intrarater and test-retest reliability was further assessed for 9 evaluators during a SMA type I clinical trial, with 9 evaluators testing a total of 38 infants twice. Relatedness of the TIMPSI score to ability to reach and ventilatory support was also examined. Results Excellent interrater video score reliability was noted (intraclass correlation coefficient, 0.97–0.98). Intrarater reliability was excellent (intraclass correlation coefficient, 0.91–0.98) and test-retest reliability ranged from r = 0.82 to r = 0.95. The TIMPSI score was related to the ability to reach (P ≤ .05). Conclusion The TIMPSI can reliably be used to assess motor function in infants with type I SMA. In addition, the TIMPSI scores are related to the ability to reach, an important functional skill in children with type I SMA. PMID:23542189

Nanoscale zero-valent iron particles supported on reduced graphene oxides by using a plasma technique and their application for removal of heavy-metal ions.

PubMed

Li, Jie; Chen, Changlun; Zhang, Rui; Wang, Xiangke

2015-06-01

Nanoscale zero-valent iron particles supported on reduced graphene oxides (NZVI/rGOs) from spent graphene oxide (GO)-bound iron ions were developed by using a hydrogen/argon plasma reduction method to improve the reactivity and stability of NZVI. The NZVI/rGOs exhibited excellent water treatment performance with excellent removal capacities of 187.16 and 396.37 mg g(-1) for chromium and lead, respectively. Moreover, the NZVI/rGOs could be regenerated by plasma treatment and maintained high removal ability after four cycles. X-ray photoelectron spectroscopy analysis results implied that the removal mechanisms could be attributed to adsorption/precipitation, reduction, or both. Such multiple removal mechanisms by the NZVI/rGOs were attributed to the reduction ability of the NZVI particles and the role of dispersing and stabilizing abilities of the rGOs. The results indicated that the NZVI/rGOs prepared by a hydrogen/argon plasma reduction method might be an effective composite for heavy-metal-ion removal. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Impact of Excellence in Armor Program on Soldier Performance in One Station Unit Training

DTIC Science & Technology

1988-12-01

soldiers and 83 NT soldiers matched on cognitive and psychomotor abilities. ASVAB and Project Alpha predictor batter (PAPB) performance data were...34(Continued) administered to 83 ET soldiers and 83 NT soldiers matched on cognitive and psychomotor abilities. ASVAB and Project A predictor battery...loading, driving, or gunnery performance on the basis of cognitive , perceptual, psychomotor, or biodata measures. This past research is germane to

[Psychoeducational intervention in high ability: intellectual functioning and extracurricular enrichment].

PubMed

Sastre-Riba, Sylvia

2014-02-24

The 'new paradigm' defines the high intellectual ability as a potential that should crystallize progressively throughout development. Its main feature is a high intellectual initial multidimensional potential, which is transformed so that, being a person with high intellectual ability is the result of a developmental process from a neurobiological substrate and the incidence of variables (psychosocial and education) which determines its manifestation more or less stable and optimal to excellence. It is interesting to know the effectiveness of psychoeducational intervention of the extracurricular enrichment programs and their effects on the expression of differential functioning and the optimization of the management of cognitive resources that lead to excellence. An extracurricular enrichment program is described and evaluated through: 1) the stability of the intellectual measures; 2) the satisfaction level of participants and families. Participants are 58 high ability students on the enrichment program and 25 parents. Intellectual profiles are obtained on T1-T2 and calculated their stability by regression analysis, the CSA and CSA-P questionnaires were applied in order to know the participants and families' satisfaction measure. Results show the basic stability of intellectual profiles with five cases of instability among the 58 profiles obtained, and a high satisfaction with the results obtained in the domain of cognitive and personal management among the participants.

72. (Credit LSU) Aerator in settling basin south of McNeil ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

72. (Credit LSU) Aerator in settling basin south of McNeil Pumping Station c1907. (Louisiana State University in Shreveport Archives, post card collection) - McNeil Street Pumping Station, McNeil Street & Cross Bayou, Shreveport, Caddo Parish, LA

40 CFR 434.64 - Procedure and method detection limit for measurement of settleable solids.

Code of Federal Regulations, 2011 CFR

2011-07-01

... thoroughly mixed sample. Allow to settle undisturbed for 45 minutes. Gently stir along the inside surface of the cone with a stirring rod. Allow to settle undisturbed for 15 minutes longer. Record the volume of...

40 CFR 434.64 - Procedure and method detection limit for measurement of settleable solids.

Code of Federal Regulations, 2010 CFR

2010-07-01

... thoroughly mixed sample. Allow to settle undisturbed for 45 minutes. Gently stir along the inside surface of the cone with a stirring rod. Allow to settle undisturbed for 15 minutes longer. Record the volume of...

[Density and hydrostatic settling velocity of Biomphalaria straminea].

PubMed

Feng-Yang, Min; Jia-Sheng, Wang; Xing-Jian, Xu; Jian-Yin, Zhou; Li-Zhen, Chen

2017-05-18

To understand the eco-hydraulics characteristics of Biomphalaria straminea , the intermediate host of Schistosoma mansoni . The drainage method and settlement tube method were applied to measure B. straminea 's density and hydrostatic settling velocity respectively. The density of B. straminea was 1.04-1.16 g/cm 3 , and the average value was 1.08 g/cm 3 . The hydrostatic settling velocity was 2.32-12.92 cm/s. The eco-hydraulics characteristics of B. straminea is different from Oncomelania hupensis , and more attention should be paid to the hydraulic measures for the control of B. straminea .

Fluid dynamic and thermodynamic analysis of a model pertaining to cryogenic fluid management in low gravity environments for a system with dynamically induced settling

NASA Technical Reports Server (NTRS)

Rios, J.

1982-01-01

The settling behavior of the liquid and gaseous phases of a fluid in a propellant and in a zero-g environment, when such settling is induced through the use of a dynamic device, in this particular case, a helical screw was studied. Particular emphasis was given to: (1) the description of a fluid mechanics model which seems applicable to the system under consideration, (2) a First Law of Thermodynamics analysis of the system, and (3) a discussion of applicable scaling rules.

Methods for the Calculation of Settling Tanks for Batch Experiments; METODOS DE CALCULO DE ESPESADORES POR ENSAYOS DISCONTINUOS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gasos, P.; Perea, C.P.; Jodra, L.G.

1957-01-01

>In order to calculate settling tanks, some tests on batch sedimentation were made, and with the data obtained the dimensions of the settling tank were found. The mechanism of sedimentation is first briefly described, and then the factors involved in the calculation of the dimensions and the sedimentation velocity are discussed. The Cloe and Clevenger method and the Kynch method were investigated experimentally and compared. The application of the calculations are illustrated. It is shown that the two methods gave markedly different results. (J.S.R.)

Study on dealkalization and settling performance of red mud.

PubMed

Luo, Muxi; Qi, Xuejiao; Zhang, Yurui; Ren, Yufei; Tong, Jiacheng; Chen, Zining; Hou, Yiming; Yeerkebai, Nuerxiate; Wang, Hongtao; Feng, Shijin; Li, Fengting

2017-01-01

At present, the dealkalization and comprehensive utilization of red mud is a worldwide problem. Studies on the settling performance and phase transformation of red mud by HCl, CaO, and H 2 O leaching are limited. In this study, the characteristics of red mud were systematically analyzed. The average sizes of graded and initial red mud were 4.11 and 9.20 μm, respectively. X-ray diffraction (XRD), X-ray fluorescence spectra (XRF), and thermogravimetry-differential scanning calorimetry (TG-DSC) results indicated the different mineralogical phases, composition, and thermal behavior. The addition of HCl could neutralize the alkalization in the red mud slurry, and CaO could replace the Na and K. Notably, the pH of the red mud slurry had no obvious change with the increase in water washing times in a certain pH. Interestingly, soluble Al and Fe were not detected in the HCl-red mud and CaO-red mud. In addition, the settling ratio was used to express the settling performance of the red mud slurry. Their interaction mechanisms were proposed, which may include phase transformation and the changing of the size and surface area. The research provided a better understanding of the phase transformation and settling performance in the treatment of red mud by HCl, CaO, and H 2 O leaching.

In situ measurements of particle settling velocity on the northern California continental shelf

NASA Astrophysics Data System (ADS)

Hill, P. S.; Sherwood, C. R.; Sternberg, R. W.; Nowell, A. R. M.

1994-08-01

As part of the Sediment TRansport Events on Shelves and Slopes (STRESS) program, a remote optical settling ☐ was deployed on the northern California continental shelf. The device operates by isolating a volume of sediment-laden fluid from the environment and then monitoring its sedimentation behavior with a transmissometer. Results show a bimodal distribution of suspended sediment during low-energy periods on the shelf that reflects the size distribution of bottom sediments. The coarse mode sinks at 0.026 cm s -1 (22 m day -1) and the fine mode settles at 0.0025 cm s -1 (2 m day -1). Between one-quarter and two-thirds of the total mass resides in the coarse mode. Roughly one-quarter is in the fine mode. The remainder sinks too slowly (<0.0015cm s -1 or <1.3m day -1) to be resolved during the 18-h measurement cycles. Greatest uncertainty in assigning mass to the various settling velocity classes comes from sensitivity to ill-constrained particle geometry of the conversion from light attenuation to mass. The device failed during higher energy periods, probably due to penetration of fluid into the ☐. Complete isolation of the fluid from the environment would improve the performance of settling ☐es in energetic settings.

New results on the hydrodynamic behaviour of fossil Nummulites tests from two nummulite banks from the Bartonian and Priabonian of northern Italy

PubMed Central

Seddighi, Mona; Briguglio, Antonino; Hohenegger, Johann; Papazzoni, Cesare Andrea

2015-01-01

Settling velocities of 58 well-preserved tests of fossil Nummulites were experimentally determined using a settling tube. The tests were collected from the nummulite banks of Pederiva di Grancona (A forms of N. lyelli and N. striatus, Middle Eocene) and San Germano dei Berici (A and B forms of N. fabianii, Late Eocene), both in the Berici Mts. (Veneto, northern Italy). The data were compared with estimated settling velocities that the same specimens might have had in life conditions. This was done by reconstructing their densities simulating water-filled condition and, to simulate post-diagenetic effects, under calcite-filled condition. These simulations show that A and B forms, even if they greatly diverge in shape, volume and size, still possess comparable settling velocities, and that each nummulite bank is characterized by specific hydrodynamic parameters. The use of settling velocity as a parameter to quantify the hydrodynamic behaviour of particles in seawater enables estimation of palaeoenvironmental conditions such as depth, substrate and the energy scenario. Such information is useful in obtaining further insights into the genesis of nummulite banks, the autochthony or allochthony of which is still being debated. Our results point to an autochthonous interpretation. PMID:26681827

New results on the hydrodynamic behaviour of fossil Nummulites tests from two nummulite banks from the Bartonian and Priabonian of northern Italy.

PubMed

Seddighi, Mona; Briguglio, Antonino; Hohenegger, Johann; Papazzoni, Cesare Andrea

2015-09-01

Settling velocities of 58 well-preserved tests of fossil Nummulites were experimentally determined using a settling tube. The tests were collected from the nummulite banks of Pederiva di Grancona (A forms of N. lyelli and N. striatus, Middle Eocene) and San Germano dei Berici (A and B forms of N. fabianii, Late Eocene), both in the Berici Mts. (Veneto, northern Italy). The data were compared with estimated settling velocities that the same specimens might have had in life conditions. This was done by reconstructing their densities simulating water-filled condition and, to simulate post-diagenetic effects, under calcite-filled condition. These simulations show that A and B forms, even if they greatly diverge in shape, volume and size, still possess comparable settling velocities, and that each nummulite bank is characterized by specific hydrodynamic parameters. The use of settling velocity as a parameter to quantify the hydrodynamic behaviour of particles in seawater enables estimation of palaeoenvironmental conditions such as depth, substrate and the energy scenario. Such information is useful in obtaining further insights into the genesis of nummulite banks, the autochthony or allochthony of which is still being debated. Our results point to an autochthonous interpretation.

Swine confinement buildings: effects of airborne particles and settled dust on airway smooth muscles.

PubMed

Demanche, Annick; Bonlokke, Jakob; Beaulieu, Marie-Josee; Assayag, Evelyne; Cormier, Yvon

2009-01-01

Swine confinement workers are exposed to various contaminants. These agents can cause airway inflammation and bronchoconstriction. This study was undertaken to evaluate if the bronchoconstrictive effects of swine barn air and settled dust are mediated by endotoxin, and if these effects are directly mediated on airway smooth muscles. Mouse tracheas where isolated and mounted isometrically in organ baths. Tracheas, with or without epithelium, were attached to a force transducer and tension was recorded. Concentrated swine building air at 68 EU/ml or settled dust extract at 0.01 g/ml were added for 20 minutes and tracheal smooth muscle contraction was measured. Direct role of LPS was assessed by removing it from air concentrates with an endotoxin affinity resin. Swine barn air and settled dust extract caused contraction of tracheal smooth muscle by 26 and 20%, respectively, of the maximal induced by methacholine. Removal of epithelium did not affect the contractile effects. LPS alone and LPS with peptidoglycans did not induce contraction. However, when endotoxin was removed from swine barn air concentrates, it lost 24% of its contractile effect. Concentrated swine barn air and settled dust have direct effects on airway smooth muscles. This effect is partially due to LPS but a synergy with other components of the environment of swine confinement buildings is required.

Kepler orbits in the Stokesian sedimentation of discs

NASA Astrophysics Data System (ADS)

Chajwa, Rahul; Menon, Narayanan; Ramaswamy, Sriram

We study experimentally the settling dynamics of a pair of falling discs in a viscous fluid (Re 10-4), in a quasi-two-dimensional geometry with the vector normal to the discs, and the trajectory of the centres of the discs, lying in a plane. For initial conditions that are symmetric about the settling direction, we find periodic or scattering orbits of the settling pair [S. Jung et al., PRE 74, 035302 (2006)], and account for these in a purely far-field analysis [S. Kim, Int J Multiphase Flow 11, 699 (1985)]. In particular, we show that the problem of a symmetrically settling pair of spheroids can be mapped to the Kepler two-body problem. The solution to this problem gives a sharp transition between bound and scattering trajectories which is consistent with experimental observations. For initial conditions where the motions of the particles are not symmetric about the settling direction, we obtain yet another separatrix between full rotations and periodic oscillations which we study within an effective Hamiltonian description of this inertialess and entirely dissipative dynamical system. Present addresses - RC: ICTS-TIFR, Hessarghatta, Bengaluru 560 089; NM: Physics Department, UMass Amherst MA 01003; SR: Dept of Physics, IISc, Bengaluru 560 012 SR was supported in part by a J C Bose Fellowship of the SERB, India.

Effects of parasites on larval and juvenile stages of the coral reef fish Pomacentrus moluccensis

NASA Astrophysics Data System (ADS)

Grutter, A. S.; Cribb, T. H.; McCallum, H.; Pickering, J. L.; McCormick, M. I.

2010-03-01

The ecological role of parasites in the early life-history stages of coral reef fish is far from clear. Parasitism in larval, recently settled and juvenile stages of a coral reef fish damselfish (Pomacentridae) was therefore investigated by quantifying the ontogenetic change in parasite load and comparing the growth rates of parasitized juvenile fish to those of unparasitized ones. Parasite prevalence in two lunar pulses of Pomacentrus moluccensis was 4 and 0% for larval stage fish, 34 and 56% for recently settled fish and 42 and 49% for juveniles. A significant increase in parasite prevalence with age group was found; the most marked increase occurred immediately after larval fish had settled. Standard length did not model prevalence well; as length is a proxy for age, this indicates that the higher prevalence in recently settled and juvenile fish compared with larvae was not a simple result of parasites accumulating with age. In one of three cohorts, there was some evidence that parasitism affected the growth rate of juveniles, as measured by otolith width. The study suggests that settling on the reef exposes young fish to potentially harmful parasites. This supports the idea that the pelagic phase may have the effect of reducing the exposure of young fish to the debilitating effects of parasites.

Emerging and reemerging epidemic-prone diseases among settling nomadic pastoralists in Uganda.

PubMed

Cummings, Matthew J; Wamala, Joseph F; Komakech, Innocent; Malimbo, Mugagga; Lukwago, Luswa

2014-09-01

Epidemic-prone diseases have traditionally been uncommon among nomadic pastoralists as mobility allows already dispersed populations to migrate away from epidemic threats. In the Karamoja region of Uganda, nomadic pastoralists are transitioning to an increasingly settled lifestyle due to cattle raiding and associated civil insecurity. In attempts to reduce conflict in the region, the Ugandan government has instituted disarmament campaigns and encouraged sedentism in place of mobility. In Karamoja, this transition to sedentism has contributed to the emergence and reemergence of epidemic-prone diseases such as cholera, hepatitis E, yellow fever, and meningococcal meningitis. The incidence of these diseases remains difficult to measure and several challenges exist to their control. Challenges to communicable disease surveillance and control among settling nomadic pastoralists are related to nomadic mobility, remote geography, vaccination and immunity, and poor sanitation and safe water access. In addition to improving gaps in infrastructure, attracting well-trained government health workers to Karamoja and similar areas with longstanding human resource limitations is critical to address the challenges to epidemic-prone disease surveillance and control among settling nomadic pastoralists. In conjunction with government health workers, community health teams provide a sustainable method by which public health programs can be improved in the austere environments inhabited by mobile and settling pastoralists. Copyright © 2014 Elsevier B.V. All rights reserved.

Ability of walking without a walking device in patients with spinal cord injury as determined using data from functional tests

PubMed Central

Poncumhak, Puttipong; Saengsuwan, Jiamjit; Amatachaya, Sugalya

2014-01-01

Background/Objectives More than half of independent ambulatory patients with spinal cord injury (SCI) need a walking device to promote levels of independence. However, long-lasting use of a walking device may introduce negative impacts for the patients. Using a standard objective test relating to the requirement of a walking device may offer a quantitative criterion to effectively monitor levels of independence of the patients. Therefore, this study investigated (1) ability of the three functional tests, including the five times sit-to-stand test (FTSST), timed up and go test (TUGT), and 10-meter walk test (10MWT) to determine the ability of walking without a walking device, and (2) the inter-tester reliability of the tests to assess functional ability in patients with SCI. Methods Sixty independent ambulatory patients with SCI, who walked with and without a walking device (30 subjects/group), were assessed cross-sectionally for their functional ability using the three tests. The first 20 subjects also participated in the inter-tester reliability test. Results The time required to complete the FTSST <14 seconds, the TUGT < 18 seconds, and the 10MWT < 6 seconds had good-to-excellent capability to determine the ability of walking without a walking device of subjects with SCI. These tests also showed excellent inter-tester reliability. Conclusions Methods of clinical evaluation for walking are likely performed using qualitative observation, which makes the results difficult to compare among testers and test intervals. Findings of this study offer a quantitative target criterion or a clear level of ability that patients with SCI could possibly walk without a walking device, which would benefit monitoring process for the patients. PMID:24621030

77 FR 38802 - Proposed CERCLA Administrative Cost Recovery Settlement; Standex International Corporation

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-29

... Settlement; Standex International Corporation AGENCY: Environmental Protection Agency. ACTION: Notice; request for public comment. SUMMARY: Notice is hereby given of a proposed administrative settlement for... following settling party: Standex International Corporation. The settlement requires the settling party to...

The Mars Science Laboratory Optical Depth Record

NASA Astrophysics Data System (ADS)

Lemmon, M. T.

2014-07-01

MSL’s Mastcam has been used to measure atmospheric dust loading. The observations show dust storms and the settling of dust during southern fall/winter and show mean dust radius declining from 1.6 to 1.4 microns as the dust settled post-storm.

REMOVAL OF HUMICSUBSTANCES AND ALGAE BY DISSOLVED AIR FLOTATION

EPA Science Inventory

Dissolved air flotation (DAF) is used in place of conventional gravity settling as a means to separate low density floc particles from water. The following objectives were: (1) to compare DAF to conventional water treatment of coagulation-flocculation followed by gravity settling...

The energy production of juvenile Arenicola marina (Polychaeta) under anoxic and hypoxic conditions

NASA Astrophysics Data System (ADS)

Schiedek, Doris; Schöttler, Udo

1990-06-01

The mode of anaerobic energy production of juvenile Arenicola marina (0-generation) was investigated under experimental conditions and in the biotope. Under experimental anaerobic conditions, juvenile A. marina produce energy by the pathways known from the adults and other euryoxic invertebrates with succinate and the volatile fatty acids, acetate and propionate, as main end products. However, the juvenile lugworms are less resistent to anoxia than the adults. The reasons for this might be their small glycogen stores and their limited ability to reduce the metabolic rate. Nevertheless, on the tidal flats the juveniles settle particularly in the area next to the high tide line, which offers such extreme conditions that adult lugworms cannot live there. This different behaviour can be explained by the dissimilar ability to use oxygen at very low partial pressures. Juveniles maintain an aerobic energy metabolism even at a PWO 2 of 15 Torr at which adults are forced to produce energy exclusively by the less effective anaerobic mode. In the field, no indications of an anaerobic energy metabolism were detected in juveniles even after an exposure of 8 hours.

Designing and facilely synthesizing a series of cobalt nitride (Co4N) nanocatalysts as non-enzymatic glucose sensors: A comparative study toward the influences of material structures on electrocatalytic activities.

PubMed

Liu, Tingting; Li, Mian; Guo, Liping

2018-05-01

Designing high-efficiency electrocatalysts for glucose concentration detection plays a pivotal role in developing various non-enzymatic glucose detection devices. Herein, we have successfully designed and synthesized various cobalt nitrides (Co 4 N) by using different weak bases (i.e. hexamethylenetetramine (HMT), urea, and ammonium hydroxide (AH)) through nitridation treatment in ammonia (NH 3 ) atmosphere. Physical characterization results demonstrate that Co 4 N-NSs (nanosheets) with vast meso/macropores and large BET surface are successfully constructed once adding carbon paper and HMT into precursors. As the synergistic effect of metallic character of Co 4 N phase , excellent electroconductibility of pyrolytic carbon, and large surface area, Co 4 N-NSs surfaces can form more Co 4+ active sites in electrochemical reaction processes. Meanwhile, the abundant meso/macroporous structures constructed in Co 4 N-NSs further promoted its mass transfer ability. Benefitting from the above mentioned advantages, Co 4 N-NSs therefore exhibit more excellent glucose oxidation ability than another three control samples (i.e. Co 4 N-HMT, Co 4 N-Urea and Co 4 N-AH). When used for glucose detection, the optimal Co 4 N-NSs display excellent detection parameters as well, such as: a wide linear range of 0.6-10.0mM, a large sensitivity of 1137.2uAcm -2 mM -1 glucose, a low detection limit of 0.1µM, a small response time of 1.7s, good reproducibility and stability, and the excellent anti-interference to other electroactive molecules and Cl - . Upon utilized for measuring glucose concentrations in human blood serum samples, the detection results on Co 4 N-NSs are accurate and satisfying as well. This work opens a new possibility for boosting electrochemical catalysis abilities of Co 4 N samples by the structure design. Copyright © 2017 Elsevier B.V. All rights reserved.

Aggregate Settling Velocities in San Francisco Estuary Margins

NASA Astrophysics Data System (ADS)

Allen, R. M.; Stacey, M. T.; Variano, E. A.

2015-12-01

One way that humans impact aquatic ecosystems is by adding nutrients and contaminants, which can propagate up the food web and cause blooms and die-offs, respectively. Often, these chemicals are attached to fine sediments, and thus where sediments go, so do these anthropogenic influences. Vertical motion of sediments is important for sinking and burial, and also for indirect effects on horizontal transport. The dynamics of sinking sediment (often in aggregates) are complex, thus we need field data to test and validate existing models. San Francisco Bay is well studied and is often used as a test case for new measurement and model techniques (Barnard et al. 2013). Settling velocities for aggregates vary between 4*10-5 to 1.6*10-2 m/s along the estuary backbone (Manning and Schoellhamer 2013). Model results from South San Francisco Bay shoals suggest two populations of settling particles, one fast (ws of 9 to 5.8*10-4 m/s) and one slow (ws of < 1*10-7 to 1.4*10-5 m/s) (Brand et al. 2015). While the open waters of San Francisco Bay and other estuaries are well studied and modeled, sediment and contaminants often originate from the margin regions, and the margins remain poorly characterized. We conducted a 24 hour field experiment in a channel slough of South San Francisco Bay, and measured settling velocity, turbulence and flow, and suspended sediment concentration. At this margin location, we found average settling velocities of 4-5*10-5 m/s, and saw settling velocities decrease with decreasing suspended sediment concentration. These results are consistent with, though at the low end of, those seen along the estuary center, and they suggest that the two population model that has been successful along the shoals may also apply in the margins.

MarsSedEx I and II: Experimental investigation of gravity effects on sedimentation on Mars

NASA Astrophysics Data System (ADS)

Kuhn, N. J.; Kuhn, B.; Gartmann, A.

2014-12-01

Sorting of sedimentary rocks is a proxy for the environmental conditions at the time of deposition, in particular the runoff that moved and deposited the material forming the rocks. Settling of sediment is strongly influenced by the gravity of a planetary body. As a consequence, sorting of a sedimentary rock varies with gravity for a given depth and velocity of surface runoff. Theoretical considerations for spheres indicate that sorting is less uniform on Mars than on Earth for runoff of identical depth. The effects of gravity on flow hydraulics limit the use of common, semi-empirical models developed to simulate particle settling in terrestrial environments, on Mars. Assessing sedimentation patterns on Mars, aimed at identifying strata potentially hosting traces of life, is potentially affected by such uncertainties. Using first-principle approaches, e.g. through Computational Fluid Dynamics, for calculating settling velocities on other planetary bodies requires a large effort and is limited by the values of boundary conditions, e.g. the shape of the particle. The degree of uncertainty resulting from the differences in gravity on Earth and Mars was therefore tested during three reduced-gravity flights, the MarsSedEx I and II missions, conducted in November 2012 and 2013. Nine types of sediment, ranging in size, shape and density were tested in custom-designed settling tubes during parabolas of Martian gravity lasting 20 to 25 seconds. Based on the observed settling velocities, the uncertainties of empirical relationships developed on Earth to assess particle settling on Mars are discussed. In addition, the potential effects of reduced gravity on patterns of erosion, transport and sorting of sediment, including the implications for identifying strata bearing traces of past life on are examined.

Quantifying Flocculation Settling Dynamics of Natural Fine-grained Suspended Sediments: "Floccin' Across the USA!"

NASA Astrophysics Data System (ADS)

Manning, A. J.; Schoellhamer, D. H.; Mehta, A. J.; Schladow, G.; Monismith, S. G.; Huang, I. B.; Kuwabara, J. S.; Carter, J. L.; Sheremet, A.; Parsons, D. R.; Whitehouse, R. J. S.; Todd, D.; Benson, T.; Spearman, J.

2016-12-01

Many coastal and inland waterways are dominated by muddy sediments; typically a mixture of clay minerals and various types of organic matter. When cohesive sediment is entrained into suspension, the particles tend to flocculate. Flocs are less dense, but faster settling than their constituent particles thus affecting their depositional characteristics. As flocs grow, their effective densities generally decrease, but their settling rates rise due to the Stokes' Law relationship. Flocculation effects become even more complex when purely cohesive sediments are mixed with different ratios of non-cohesive sediments, and if biological activity (e.g., exudate production) affects the resultant cohesion. Developing instrumentation that can provide key physical and dynamical data on depositional rates of flocculating sediments is extremely important in advancing our understanding of natural flocculation processes. Complementary qualitative and quantitative data improve our understanding of the depositional and aggregational physical processes through parameterization. This presentation will demonstrate recent advances in the study of the flocculation process through the use of video image technology. One such device pioneered at HR Wallingford, and implemented with co-authors, is the high-resolution floc video camera, LabSFLOC - Laboratory Spectral Flocculation Characteristics (developed by Prof. Manning). LabSFLOC can observe (directly or indirectly) floc spectral physical properties, including: floc size, settling velocity, effective density, porosity, shape, mass, and settling flux (using controlled volume referencing). These data are highly desirable for sediment transport modelers. Examples of floc measurements from locations in estuaries, tidal lagoons, river deltas, and lakes from locations across the US will be presented. In addition, we will demonstrate how video floc data can be used to parameterize floc settling characteristics for use in modeling.

Reprint of: A numerical investigation of fine sediment resuspension in the wave boundary layer-Uncertainties in particle inertia and hindered settling

NASA Astrophysics Data System (ADS)

Cheng, Zhen; Yu, Xiao; Hsu, Tian-Jian; Balachandar, S.

2016-05-01

The wave bottom boundary layer is a major conduit delivering fine terrestrial sediments to continental margins. Hence, studying fine sediment resuspensions in the wave boundary layer is crucial to the understanding of various components of the earth system, such as carbon cycles. By assuming the settling velocity to be a constant in each simulation, previous turbulence-resolving numerical simulations reveal the existence of three transport modes in the wave boundary layer associated with sediment availabilities. As the sediment availability and hence the sediment-induced stable stratification increases, a sequence of transport modes, namely, (I) well-mixed transport, (II) formulation of lutocline resembling a two-layer system, and (III) completely laminarized transport are observed. In general, the settling velocity is a flow variable due to hindered settling and particle inertia effects. Present numerical simulations including the particle inertia suggest that for a typical wave condition in continental shelves, the effect of particle inertia is negligible. Through additional numerical experiments, we also confirm that the particle inertia tends (up to the Stokes number St = 0.2) to attenuate flow turbulence. On the other hand, for flocs with lower gelling concentrations, the hindered settling can play a key role in sustaining a large amount of suspended sediments and results in the laminarized transport (III). For the simulation with a very significant hindered settling effect due to a low gelling concentration, results also indicate the occurrence of gelling ignition, a state in which the erosion rate is always higher than the deposition rate. A sufficient condition for the occurrence of gelling ignition is hypothesized for a range of wave intensities as a function of sediment/floc properties and erodibility parameters.

Study of aerosol behavior on the basis of morphological characteristics during festival events in India

NASA Astrophysics Data System (ADS)

Agrawal, Anubha; Upadhyay, Vinay K.; Sachdeva, Kamna

2011-07-01

Two important festival events were selected to assess their impacts on atmospheric chemistry by understanding settling velocity and emission time of aerosols. Using high volume sampler, aerosols were collected in a sequential manner to understand settling velocity and emission time of aerosols on a particular day. Composition and total suspended particulate load of the aerosols collected during the festivals were used as markers for strengthening the assessment. Terminal settling velocity of the aerosols were calculated using morphological and elemental compositional data, obtained from scanning electron microcopy (SEM) and energy dispersive X-ray (EDX) study. Aerosol load, black carbon, aromatic carbon and terminal velocity calculations were correlated to obtain conclusion that aerosols collected on the festival day might have been emitted prior to the festival. Settling time of aerosols collected on 17th and 19th October'09 during Diwali were found to be 36.5 (1.5 days) and 12.8 h, respectively. Carbon concentration estimated using EDX was found to be almost double in the sample collected after 2 days of the festival event. This strengthens our inference of time calculation where carbon with high concentration of load must have settled approximately after two days of the event. Settling time of aerosols collected on Holi morning and afternoon was found to be 1.7 and 24.8 h, respectively. Further, because of the small distance of 5.4 km between the meteorological station and sampling site, observed TSP values were compared with theoretical load values, calculated by using visibility values taken from the meteorological data. And it was found that both experimental and calculated values are close to each other about 50% of the times, which proves the assumption that experimental and meteorological data are comparable.

A model for thin layer formation by delayed particle settling at sharp density gradients

NASA Astrophysics Data System (ADS)

Prairie, Jennifer C.; White, Brian L.

2017-02-01

Thin layers - regions where plankton or particles accumulate vertically on scales of a few meters or less - are common in coastal waters, and have important implications for both trophic dynamics and carbon cycling. These features can form by a variety of biological and physical mechanisms, including localized growth, shear-thinning, and directed swimming. An additional mechanism may result in the formation of thin layers of marine aggregates, which have been shown to decrease their settling velocity when passing through sharp density gradients, a behavior termed delayed settling. Here, we apply a simple vertical advection-diffusion model to predict the properties of aggregate thin layers formed by this process. We assume a constant vertical flux of particles from the surface, which is parameterized by observations from laboratory experiments with marine aggregates. The formation, maintenance, and shape of the layers are described in relation to non-dimensional numbers that depend on environmental conditions and particle settling properties. In particular, model results demonstrate layer intensity and sharpness both increase with higher Péclet number (Pe), that is, under conditions with weaker mixing relative to layer formation. Similarly, more intense and sharper layers are found when the delayed settling behavior of aggregates is characterized by a lower velocity minimum. The model also predicts layers that are vertically asymmetric and highly "peaky" when compared with a Gaussian distribution, features often seen in thin layers in natural environments. Lastly, by comparing model predictions with observations of thin layers in the field, we are able to gain some insight into the applicability of delayed settling as a thin layer formation mechanism in different environmental conditions.

Observations of Near-Bed Deposition and Resuspension Processes at the Fluvial-Tidal Transition Using High Resolution Adcp, Adv, and Lisst

NASA Astrophysics Data System (ADS)

Haught, D. R.; Stumpner, P.

2012-12-01

Processes that determine deposition and resuspension of sediment in fluvial and tidal systems are complicated and difficult to predict because of turbulence-sediment interaction. In fluvial systems net sediment deposition rates near the bed are determined by shear stresses that occur when turbulence interacts with the bed and the entrained sediment above. In tidal systems, processes are driven primarily by the confounding factors of slack water and reversing flow. In this study we investigate near-bed sediment fluxes, settling velocities and sediment size distributions during a change from a fluvial signal to a tidal signal. In order to examine these processes a high resolution, high frequency ADCP, ADV, water quality sonde and LISST data were collocated at the fluvial-tidal transition in the Sacramento River at Freeport, CA. Data were collected at 15-30 minute increments for a month`. Data were dissevered into fluvial and tidal components. Acoustic backscatterence was used as a surrogate to sediment concentration and sediment flux () was calculated from the turbulence properties. Settling velocities were computed from the diffusion-advection equation assuming equilibrium of settling and re-suspension fluxes. Particle density was back-calculated from median particle diameter and calculated settling velocities (Reynolds number<0.5) using Stokes' law. Preliminary results suggest that during peak fluvial discharge that the diffusion-advection gives poor estimates of settling velocities as inferred from particle densities above 3500 kg/m3. During the transition from fluvial to tidal signal and throughout the tidal signal particle densities range from 2650 kg/m3 to 1000 kg/m3, suggesting that settling velocities were accurately estimated. Thus the equilibrium assumption appears poor during high fluvial discharge and reasonable during low fluvial discharge when tidal signal is dominant.

Flocculation Settling Dynamics of Natural Cohesive Suspended Sediments: "Floccin' Across the USA!"

NASA Astrophysics Data System (ADS)

Manning, A. J.; Schoellhamer, D. H.; Mehta, A. J.; Schladow, G.; Monismith, S. G.; Huang, I. B.; Kuwabara, J. S.; Carter, J. L.; Sheremet, A.; Parsons, D. R.; Whitehouse, R. J. S.; Todd, D.; Benson, T.; Spearman, J.

2017-12-01

Many coastal and inland waterways are dominated by muddy sediments; comprising a mixture of clay minerals and various types of organic matter. When cohesive sediment is entrained into suspension, the particles tend to flocculate. Flocs are less dense, but faster settling than their constituent particles thus affecting their depositional characteristics. As flocs grow, their effective densities generally decrease, but their settling rates rise due to the Stokes' Law relationship. Flocculation effects become even more complex when purely cohesive sediments are mixed with different ratios of non-cohesive sediments, and if biological activity (e.g., exudate production) affects the resultant cohesion. Developing instrumentation that can provide key physical and dynamical data on depositional rates of flocculating sediments is extremely important in advancing our understanding of natural flocculation processes. Complementary qualitative and quantitative data improve our understanding of the depositional and aggregational physical processes through parameterization. This presentation will demonstrate recent advances in the study of the flocculation process through the use of video image technology. One such device pioneered at HR Wallingford, and implemented with co-authors, is the high-resolution floc video camera, LabSFLOC - Laboratory Spectral Flocculation Characteristics (developed by Prof. Manning). LabSFLOC can observe (directly or indirectly) floc spectral physical properties, including: floc size, settling velocity, effective density, porosity, shape, mass, and settling flux (using controlled volume referencing). These data are highly desirable for sediment transport modelers. Examples of floc measurements from locations in estuaries, tidal lagoons, river deltas, and lakes from locations across the US will be presented. In addition, we will demonstrate how video floc data can be used to parameterize floc settling characteristics for use in modeling.

Final Report - Crystal Settling, Redox, and High Temperature Properties of ORP HLW and LAW Glasses, VSL-09R1510-1, Rev. 0, dated 6/18/09

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, Albert A.; Wang, C.; Gan, H.

2013-11-13

The radioactive tank waste treatment programs at the U. S. Department of Energy (DOE) have featured joule heated ceramic melter technology for the vitrification of high level waste (HLW). The Hanford Tank Waste Treatment and Immobilization Plant (WTP) employs this same basic technology not only for the vitrification of HLW streams but also for the vitrification of Low Activity Waste (LAW) streams. Because of the much greater throughput rates required of the WTP as compared to the vitrification facilities at the West Valley Demonstration Project (WVDP) or the Defense Waste Processing Facility (DWPF), the WTP employs advanced joule heated meltersmore » with forced mixing of the glass pool (bubblers) to improve heat and mass transport and increase melting rates. However, for both HLW and LAW treatment, the ability to increase waste loadings offers the potential to significantly reduce the amount of glass that must be produced and disposed and, therefore, the overall project costs. This report presents the results from a study to investigate several glass property issues related to WTP HLW and LAW vitrification: crystal formation and settling in selected HLW glasses; redox behavior of vanadium and chromium in selected LAW glasses; and key high temperature thermal properties of representative HLW and LAW glasses. The work was conducted according to Test Plans that were prepared for the HLW and LAW scope, respectively. One part of this work thus addresses some of the possible detrimental effects due to considerably higher crystal content in waste glass melts and, in particular, the impact of high crystal contents on the flow property of the glass melt and the settling rate of representative crystalline phases in an environment similar to that of an idling glass melter. Characterization of vanadium redox shifts in representative WTP LAW glasses is the second focal point of this work. The third part of this work focused on key high temperature thermal properties of representative WTP HLW and LAW glasses over a wide range of temperatures, from the melter operating temperature to the glass transition.« less

Surface Sampling of Spores in Dry-Deposition Aerosols▿

PubMed Central

Edmonds, Jason M.; Collett, Patricia J.; Valdes, Erica R.; Skowronski, Evan W.; Pellar, Gregory J.; Emanuel, Peter A.

2009-01-01

The ability to reliably and reproducibly sample surfaces contaminated with a biological agent is a critical step in measuring the extent of contamination and determining if decontamination steps have been successful. The recovery operations following the 2001 attacks with Bacillus anthracis spores were complicated by the fact that no standard sample collection format or decontamination procedures were established. Recovery efficiencies traditionally have been calculated based upon biological agents which were applied to test surfaces in a liquid format and then allowed to dry prior to sampling tests, which may not be best suited for a real-world event with aerosolized biological agents. In order to ascertain if differences existed between air-dried liquid deposition and biological spores which were allowed to settle on a surface in a dried format, a study was undertaken to determine if differences existed in surface sampling recovery efficiencies for four representative surfaces. Studies were then undertaken to compare sampling efficiencies between liquid spore deposition and aerosolized spores which were allowed to gradually settle under gravity on four different test coupon types. Tests with both types of deposition compared efficiencies of four unique swabbing materials applied to four surfaces with various surface properties. Our studies demonstrate that recovery of liquid-deposited spores differs significantly from recovery of dry aerosol-deposited spores in most instances. Whether the recovery of liquid-deposited spores is overexaggerated or underrepresented with respect to that of aerosol-deposited spores depends upon the surface material being tested. PMID:18997021

Prediction of settled water turbidity and optimal coagulant dosage in drinking water treatment plant using a hybrid model of k-means clustering and adaptive neuro-fuzzy inference system

NASA Astrophysics Data System (ADS)

Kim, Chan Moon; Parnichkun, Manukid

2017-11-01

Coagulation is an important process in drinking water treatment to attain acceptable treated water quality. However, the determination of coagulant dosage is still a challenging task for operators, because coagulation is nonlinear and complicated process. Feedback control to achieve the desired treated water quality is difficult due to lengthy process time. In this research, a hybrid of k-means clustering and adaptive neuro-fuzzy inference system ( k-means-ANFIS) is proposed for the settled water turbidity prediction and the optimal coagulant dosage determination using full-scale historical data. To build a well-adaptive model to different process states from influent water, raw water quality data are classified into four clusters according to its properties by a k-means clustering technique. The sub-models are developed individually on the basis of each clustered data set. Results reveal that the sub-models constructed by a hybrid k-means-ANFIS perform better than not only a single ANFIS model, but also seasonal models by artificial neural network (ANN). The finally completed model consisting of sub-models shows more accurate and consistent prediction ability than a single model of ANFIS and a single model of ANN based on all five evaluation indices. Therefore, the hybrid model of k-means-ANFIS can be employed as a robust tool for managing both treated water quality and production costs simultaneously.

Estimating Texas motor vehicle operating costs.

DOT National Transportation Integrated Search

2009-10-01

A specific Vcost model was developed for Texas conditions based on a sophisticated fuel model for light : duty vehicles, several excellent sources of secondary vehicle cost data, and the ability to measure heavy truck fuel : consumption through both ...

Hydrogels Containing Prussian Blue Nanoparticles Toward Removal of Radioactive Cesium Ions.

PubMed

Kamachi, Yuichiro; Zakaria, Mohamed B; Torad, Nagy L; Nakato, Teruyuki; Ahamad, Tansir; Alshehri, Saad M; Malgras, Victor; Yamauchil, Yusuke

2016-04-01

Recent reports have demonstrated the practical application of Prussian blue (PB) nanoparticles toward environmental clean-up of radionuclide 173Cs. Herein, we prepared a large amount of PB nanoparticles by mixing both iron(III) chloride and sodium ferrocyanide hydrate as starting precursors. The obtained PB nanoparticles show a high surface area (440 m2. g-1) and consequently an excellent uptake ability of Cs ions from aqueous solutions. The uptake ability of Cs ions into poly(N-isopropylacrylamide (PNIPA) hydrogel is drastically increased up to 156.7 m2. g-1 after incorporating our PB nanoparticles, compared to 30.2 m2 . g-1 after using commercially available PB. Thus, our PB-containing PNIPA hydrogel can be considered as an excellent candidate for the removal of Cs ions from aqueous solutions, which will be useful for the remediation of the nuclear waste.

Irritants and allergens at school in relation to furnishings and cleaning.

PubMed

Smedje, G; Norbäck, D

2001-06-01

In order to study the influence of furnishings and cleaning on the indoor air quality at school, 181 randomly chosen classrooms were investigated. The amounts of open shelves, textiles and other fittings were noted, data were gathered on cleaning routines, and a number of pollutants were measured in the classrooms. In classrooms with more fabrics there was more settled dust and the concentration of formaldehyde was higher. Classrooms with more open shelves had more formaldehyde, and more pet allergens in settled dust, and classrooms with a white board, instead of a chalk board, were less dusty. Classrooms mainly cleaned through wet mopping had more airborne viable bacteria but less settled dust than classrooms mainly cleaned by dry methods. In rooms where the desks and curtains were more often cleaned, the concentrations of cat and dog allergen in settled dust were lower. It is concluded that furnishings and textiles in the classroom act as significant reservoirs of irritants and allergens and have an impact on the indoor air quality at school.

Settling velocity of particulate pollutants from combined sewer wet weather discharges.

PubMed

Gromaire, M C; Kafi-Benyahia, M; Gasperi, J; Saad, M; Moilleron, R; Chebbo, G

2008-01-01

Settling velocities of TSS and of particulate pollutants (COP, PDCO, PTKN, PCu, PPb, PZn, PPAH) measured on a wide range of wet weather flow (WWF) samples collected at different levels of the Parisian combined sewer system are reported. The recorded V30 (0.01 to 0.1 mm s(-1)) and V50 (0.09 to 0.6 mm s(-1)) values exceed by a factor 10 those of dry weather sewage and also exceed the values measured for pavement runoff. These values lie however often below the 0.28 mm s(-1) reference value considered in France for the design of WWF settling facilities. A decrease in settleability is observed between a small upstream catchment and larger scaled downstream catchments. The settling behaviour of particulate pollutants varies depending on the considered parameter and can differ significantly from the TSS behaviour, due to a non homogeneous distribution of micropolluants over the different classes of particles. PZn and PTKN appear far less settleable than TSS, whereas PPAH show higher settleability. IWA Publishing 2008.

Tracing the source of difficult to settle fine particles which cause turbidity in the Hitotsuse Reservoir, Japan.

PubMed

Murakami, Toshiki; Suzuki, Yoshihiro; Oishi, Hiroyuki; Ito, Kenichi; Nakao, Toshio

2013-05-15

A unique method to trace the source of "difficult-to-settle fine particles," which are a causative factor of long-term turbidity in reservoirs was developed. This method is characterized by cluster analysis of XRD (X-ray diffraction) data and homology comparison of major component compositions between "difficult-to-settle fine particles" contained in landslide soil samples taken from the upstream of a dam, and suspended "long-term turbid water particles" in the reservoir, which is subject to long-term turbidity. The experiment carried out to validate the proposed method, demonstrated a high possibility of being able to make an almost identical match between "difficult-to-settle fine particles" taken from landslide soils at specific locations and "long-term turbid water particles" taken from a reservoir. This method has the potential to determine substances causing long-term turbidity and the locations of soils from which those substances came. Appropriate countermeasures can then be taken at those specific locations. Copyright © 2013 Elsevier Ltd. All rights reserved.

A consistent modelling methodology for secondary settling tanks: a reliable numerical method.

PubMed

Bürger, Raimund; Diehl, Stefan; Farås, Sebastian; Nopens, Ingmar; Torfs, Elena

2013-01-01

The consistent modelling methodology for secondary settling tanks (SSTs) leads to a partial differential equation (PDE) of nonlinear convection-diffusion type as a one-dimensional model for the solids concentration as a function of depth and time. This PDE includes a flux that depends discontinuously on spatial position modelling hindered settling and bulk flows, a singular source term describing the feed mechanism, a degenerating term accounting for sediment compressibility, and a dispersion term for turbulence. In addition, the solution itself is discontinuous. A consistent, reliable and robust numerical method that properly handles these difficulties is presented. Many constitutive relations for hindered settling, compression and dispersion can be used within the model, allowing the user to switch on and off effects of interest depending on the modelling goal as well as investigate the suitability of certain constitutive expressions. Simulations show the effect of the dispersion term on effluent suspended solids and total sludge mass in the SST. The focus is on correct implementation whereas calibration and validation are not pursued.

An analytical study of reduced-gravity flow dynamics

NASA Technical Reports Server (NTRS)

Bradshaw, R. D.; Kramer, J. L.; Zich, J. L.

1976-01-01

Addition of surface tension forces to a marker-and-cell code and the performance of four incompressible fluid simulations in reduced gravity, were studied. This marker-and-cell code has a variable grid capability with arbitrary curved boundaries and time dependent acceleration fields. The surface tension logic includes a spline fit of surface marker particles as well as contact angle logic for straight and curved wall boundaries. Three types of flow motion were simulated with the improved code: impulsive settling in a model Centaur LH2 tank, continuous settling in a model and full scale Centaur LO2 tank and mixing in a Centaur LH2 tank. The impulsive settling case confirmed a drop tower analysis which indicated more orderly fluid collection flow patterns with this method providing a potential savings in settling propellants. In the LO2 tank, fluid collection and flow simulation into the thrust barrel were achieved. The mixing simulation produced good results indicating both the development of the flow field and fluid interface behavior.

Study of virgin olive oil clarification by settling under dynamic conditions.

PubMed

Gila, Abraham; Bejaoui, Mohamed Aymen; Beltrán, Gabriel; Aguilera, María Paz; Jiménez, Antonio

2018-04-16

Vertical centrifugation is the main method for virgin olive oil (VOO) clarification. However, in recent years, settling tanks are also being used to clarify the oils from decanters. They can operate under static or dynamic conditions. In this work, vertical centrifugation and settling under dynamic conditions for VOO clarification and their effects on VOO characteristics were compared. VOO quality parameters were not affected by the clarification systems studied. The vertical centrifugal separator (VCS) showed higher clarification efficiency, giving clarified oils with higher phenol content and better sensory characteristics. VOOs clarified by dynamic settling showed notable losses of phenols and worse sensory characteristics, since the tank purge system was not efficient, with most of the impurities remaining in the tanks. The VCS with minimal water addition is a quick operation with low water consumption and is a better option to produce VOOs of improved quality, especially in terms of longer shelf life and preservation of positive sensory notes. © 2018 Society of Chemical Industry. © 2018 Society of Chemical Industry.

A novel bioassay for evaluating the efficacy of biocides to inhibit settling and early establishment of marine biofilms.

PubMed

Arrhenius, Åsa; Backhaus, Thomas; Hilvarsson, Annelie; Wendt, Ida; Zgrundo, Aleksandra; Blanck, Hans

2014-10-15

This paper presents a novel assay that allows a quick and robust assessment of the effects of biocides on the initial settling and establishment of marine photoautotrophic biofilms including the multitude of indigenous fouling organisms. Briefly, biofilms are established in the field, sampled, comminuted and re-settled on clean surfaces, after 72h chlorophyll a is measured as an integrating endpoint to reflect both settling and growth. Eight antifoulants were used to evaluate the assay. Efficacy ranking, based on EC98 values from most to least efficacious compound is: copper pyrithione>TPBP>DCOIT>tolylfluanid>zinc pyrithione>medetomidine>copper (Cu(2+)), while ecotoxicological ranking (based on EC10 values) is irgarol, copper pyrithione>zinc pyrithione>TPBP>tolylfluanid>DCOIT>copper (Cu(2+))>medetomidine. The algaecide irgarol did not cause full inhibition. Instead the inhibition leveled out at 95% effect at 30 nmoll(-)(1), a concentration that was clearly lower than for any other of the tested biocides. Copyright © 2014. Published by Elsevier Ltd.

Fabrication of p-n heterostructure ZnO/Si moth-eye structures: Antireflection, enhanced charge separation and photocatalytic properties

NASA Astrophysics Data System (ADS)

Zeng, Yu; Chen, XiFang; Yi, Zao; Yi, Yougen; Xu, Xibin

2018-05-01

The pyramidal silicon substrate is formed by wet etching, then ZnO nanorods are grown on the surface of the pyramidal microstructure by a hydrothermal method to form a moth-eye composite heterostructure. The composite heterostructure of this material determines its excellent anti-reflection properties and ability to absorb light from all angles. In addition, due to the effective heterojunction binding area, the composite micro/nano structure has excellent photoelectric conversion performance. Its surface structure and the large specific surface area gives the material super hydrophilicity, excellent gas sensing characteristic, and photocatalytic properties. Based on the above characteristics, the micro/nano heterostructure can be used in solar cells, sensors, light-emitting devices, and photocatalytic fields.

Calcium-silicate mesoporous nanoparticles loaded with chlorhexidine for both anti- Enterococcus faecalis and mineralization properties.

PubMed

Fan, Wei; Li, Yanyun; Sun, Qing; Ma, Tengjiao; Fan, Bing

2016-10-21

In infected periapical tissues, Enterococcus faecalis is one of the most common dominant bacteria. Chlorhexidine has been proved to show strong antibacterial ability against E. faecalis but is ineffective in promoting mineralization for tissues around root apex. Mesoporous calcium-silicate nanoparticles are newly synthesized biomaterials with excellent ability to promote mineralization and carry-release bioactive molecules in a controlled manner. In this study, mesoporous calcium-silicate nanoparticles were functionalized with chlorhexidine and their releasing profile, antibacterial ability, effect on cell proliferation and in vitro mineralization property were evaluated. The chlorhexidine was successfully incorporated into mesoporous calcium-silicate nanoparticles by a mixing-coupling method. The new material could release chlorhexidine as well as Ca 2+ and SiO 3 2- in a sustained manner with an alkaline pH value under different conditions. The antimicrobial ability against planktonic E. faecalis was dramatically improved after chlorhexidine incorporation. The nanoparticles with chlorhexidine showed no negative effect on cell proliferation with low concentrations. On dentin slices, the new synthesized material demonstrated a similar inhibitory effect on E. faecalis as the chlorhexidine. After being immersed in SBF for 9 days, numerous apatite crystals could be observed on surfaces of the material tablets. Mesoporous calcium-silicate nanoparticles loaded with chlorhexidine exhibited release of ions and chlorhexidine, low cytotoxicity, excellent antibacterial ability and in vitro mineralization. This material could be developed into a new effective intra-canal medication in dentistry or a new bone defect filling material for infected bone defects.

Evaluation of reproductive function in Turkana women with enzyme immunoassays of urinary hormones in the field.

PubMed

Leslie, P W; Campbell, K L; Little, M A; Kigondu, C S

1996-02-01

The frequently reported observation that nomadic populations have lower fertility than their settled counterparts is often attributed to what are perceived as harsh, stressful conditions under which the nomads live. But the consequences of the hypothesized stresses for the reproductive biology or demography of these populations have been documented only a little. Traditionally, the Turkana of northwest Kenya are nomadic herders, but increasing numbers have settled on agricultural development schemes. We used an array of hormonal assays along with anthropometric indexes of nutritional status and interviews covering reproductive history, recent menstruation, diet, and health to compare reproductive function in nomadic and settled Turkana women. First morning urine samples were collected for three consecutive days during a series of surveys. Human choriogonadotropin (hCG; a marker for pregnancy), luteinizing hormone (LH; an indicator of ovulation), and pregnanediol glucuronide (PdG; an indicator of postovulatory luteal function) were assessed in the field with commercially available dipstick enzyme immunoassays. These assays along with the interview data allowed us to determine the reproductive status (e.g., pregnant or cycling, and if cycling, which phase of the ovarian cycle) of 166 nomadic and 194 settled Turkana women. The cross-sectional classifications allowed inferences of conception rates and normality of ovarian function. Follow-up surveys provided rates of pregnancy loss. Compared with the settled women, the nomadic women exhibited lower pregnancy rates and cycling nomadic women were less likely to show evidence of ovulation or luteal function. These results suggest that reproductive function of the nomadic women is diminished relative to the settled women. However, the settled women experienced a much higher rate of pregnancy loss, which may mean that their effective fecundability is in fact lower than that of the nomadic women. This study is the first to apply such a wide range of hormonal assays in the field. It demonstrates that field-based assays are feasible and robust and can play an important role in epidemiological and biodemographic studies, even in remote locations under conditions that would ordinarily be considered incompatible with on-site laboratory analysis.

Recycling silicon wire-saw slurries: separation of silicon and silicon carbide in a ramp settling tank under an applied electrical field.

PubMed

Tsai, Tzu-Hsuan; Shih, Yu-Pei; Wu, Yung-Fu

2013-05-01

The growing demand for silicon solar cells in the global market has greatly increased the amount of silicon sawing waste produced each year. Recycling kerf Si and SiC from sawing waste is an economical method to reduce this waste. This study reports the separation of Si and SiC using a ramp settling tank. As they settle in an electrical field, small Si particles with higher negative charges have a longer horizontal displacement than SiC particles in a solution of pH 7, resulting in the separation of Si and SiC. The agreement between experimental results and predicted results shows that the particles traveled a short distance to reach the collection port in the ramp tank. Consequently, the time required for tiny particles to hit the tank bottom decreased, and the interference caused by the dispersion between particles and the fluid motion during settling decreased. In the ramp tank, the highest purities of the collected SiC and Si powders were 95.2 and 7.01 wt%, respectively. Using a ramp tank, the recycling fraction of Si-rich powders (SiC < 15 wt%) reached 22.67% (based on the whole waste). This fraction is greater than that achieved using rectangular tanks. Recycling Si and SiC abrasives from the silicon sawing waste is regarded as an economical solution to reduce the sawing waste. However, the separation of Si and SiC is difficult. This study reports the separation of Si and SiC using a ramp settling tank under an applied electrical field. As they settle in an electrical field, small Si particles with higher negative charges have a longer horizontal displacement than SiC particles in a solution of pH 7, resulting in the separation of Si and SiC. Compared with the rectangular tanks, the recycling fraction of Si-rich powders using a ramp tank is greater, and the proposed ramp settling tank is more suitable for industrial applications.

32 CFR 282.4 - Policy.

Code of Federal Regulations, 2010 CFR

2010-07-01

... certain claim settlement and advance decision functions that, by statute or delegation, are vested in the... SETTLING PERSONNEL AND GENERAL CLAIMS AND PROCESSING ADVANCE DECISION REQUESTS § 282.4 Policy. It is DoD policy that: (a) Claims shall be settled and advance decisions rendered in accordance with all pertinent...

78 FR 73512 - Privacy Act of 1974; System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-06

.... This system will be used to evaluate and settle Admiralty tort claims asserted for and against the..., citizenship, race/ethnicity, physically descriptive characteristics, birth date, personal cell telephone....'' Purpose(s): Delete entry and replace with ``To evaluate and settle Admiralty tort claims asserted for and...

48 CFR 49.108-7 - Government assistance in settling subcontracts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Government assistance in settling subcontracts. 49.108-7 Section 49.108-7 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT TERMINATION OF CONTRACTS General Principles 49.108-7 Government assistance in...

Hydrodynamic modeling of juvenile mussel dispersal in a large river: The potential effects of bed shear stress and other parameters

USGS Publications Warehouse

Daraio, J.A.; Weber, L.J.; Newton, T.J.

2010-01-01

Because unionid mussels have a parasitic larval stage, they are able to disperse upstream and downstream as larvae while attached to their host fish and with flow as juveniles after excystment from the host. Understanding unionid population ecology requires knowledge of the processes that affect juvenile dispersal prior to establishment. We examined presettlement (transport and dispersion with flow) and early postsettlement (bed shear stress) hydraulic processes as negative censoring mechanisms. Our approach was to model dispersal using particle tracking through a 3-dimensional flow field output from hydrodynamic models of a reach of the Upper Mississippi River. We tested the potential effects of bed shear stress (??b) at 5 flow rates on juvenile mussel dispersal and quantified the magnitude of these effects as a function of flow rate. We explored the reach-scale relationships of Froude number (Fr), water depth (H), local bed slope (S), and unit stream power (QS) with the likelihood of juvenile settling (??). We ran multiple dispersal simulations at each flow rate to estimate ??, the parameter of a Poisson distribution, from the number of juveniles settling in each grid cell, and calculated dispersal distances. Virtual juveniles that settled in areas of the river where b > critical shear stress (c) were resuspended in the flow and transported further downstream, so we ran simulations at 3 different conditions for ??c (??c = ??? no resuspension, 0.1, and 0.05 N/m2). Differences in virtual juvenile dispersal distance were significantly dependent upon c and flow rate, and effects of b on settling distribution were dependent upon c. Most simulations resulted in positive correlations between ?? and ??b, results suggesting that during early postsettlement, ??b might be the primary determinant of juvenile settling distribution. Negative correlations between ?? and ??b occurred in some simulations, a result suggesting that physical or biological presettlement processes might determine juvenile settling distributions. Field data are needed to test these hypotheses. Results support the idea that flow patterns and b can act as negative censoring mechanisms controlling settling distributions. Furthermore, a river reach probably has a quantifiable threshold range of flow rates. Above the upper threshold, ??b probably is the primary determinant of juvenile settling distribution. Relationships of ?? with H, Fr, S, and QS were relatively weak. Important physical processes that affect dispersal probably are not captured by approximations based on large-scale hydraulic parameters, such as Fr and H. ?? 2010 The North American Benthological Society.

CO2calc: A User-Friendly Seawater Carbon Calculator for Windows, Mac OS X, and iOS (iPhone)

USGS Publications Warehouse

Robbins, L.L.; Hansen, M.E.; Kleypas, J.A.; Meylan, S.C.

2010-01-01

A user-friendly, stand-alone application for the calculation of carbonate system parameters was developed by the U.S. Geological Survey Florida Shelf Ecosystems Response to Climate Change Project in response to its Ocean Acidification Task. The application, by Mark Hansen and Lisa Robbins, USGS St. Petersburg, FL, Joanie Kleypas, NCAR, Boulder, CO, and Stephan Meylan, Jacobs Technology, St. Petersburg, FL, is intended as a follow-on to CO2SYS, originally developed by Lewis and Wallace (1998) and later modified for Microsoft Excel? by Denis Pierrot (Pierrot and others, 2006). Besides eliminating the need for using Microsoft Excel on the host system, CO2calc offers several improvements on CO2SYS, including: An improved graphical user interface for data entry and results Additional calculations of air-sea CO2 fluxes (for surface water calculations) The ability to tag data with sample name, comments, date, time, and latitude/longitude The ability to use the system time and date and latitude/ longitude (automatic retrieval of latitude and longitude available on iPhone? 3, 3GS, 4, and Windows? hosts with an attached National Marine Electronics Association (NMEA)-enabled GPS) The ability to process multiple files in a batch processing mode An option to save sample information, data input, and calculated results as a comma-separated value (CSV) file for use with Microsoft Excel, ArcGIS,? or other applications An option to export points with geographic coordinates as a KMZ file for viewing and editing in Google EarthTM

Decentralized PID controller for TITO systems using characteristic ratio assignment with an experimental application.

PubMed

Hajare, V D; Patre, B M

2015-11-01

This paper presents a decentralized PID controller design method for two input two output (TITO) systems with time delay using characteristic ratio assignment (CRA) method. The ability of CRA method to design controller for desired transient response has been explored for TITO systems. The design methodology uses an ideal decoupler to reduce the interaction. Each decoupled subsystem is reduced to first order plus dead time (FOPDT) model to design independent diagonal controllers. Based on specified overshoot and settling time, the controller parameters are computed using CRA method. To verify performance of the proposed controller, two benchmark simulation examples are presented. To demonstrate applicability of the proposed controller, experimentation is performed on real life interacting coupled tank level system. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Transport of particles, drops, and small organisms in density stratified fluids

NASA Astrophysics Data System (ADS)

Ardekani, Arezoo M.; Doostmohammadi, Amin; Desai, Nikhil

2017-10-01

Sedimenting particles and motile organisms are ubiquitously found in oceans and lakes, where density stratification naturally occurs due to temperature or salinity gradients. We explore the effects of stratification on the fundamental hydrodynamics of settling particles, rising drops, and small organisms. The results of our direct numerical simulations of the sedimentation of particles show that the presence of vertical density gradients in the water column can substantially affect the settling dynamics of a particle, interaction between a pair of particles, and settling rates and microstructure of suspension of particles. We show that elongation of particles affects both the settling orientation and the settling rate of particles in stratified fluids, which will have direct consequences on the vertical flux of particulate matter and carbon flux in the ocean. We further demonstrate an unexpected effect of buoyancy, potentially affecting a broad range of processes at pycnoclines in oceans and lakes. In particular, stratification has a major effect on the flow field, energy expenditure, and nutrient uptake of small organisms. In addition, the role of stratification in pattern formation of bioconvection plumes of algal cells and in biogenic mixing is investigated. In particular, the numerical approach allows for considering the effects of background turbulence and hydrodynamic perturbations produced by swimming organisms, shedding light on the contribution of organisms in the mixing process in aqueous environments.

Stochastic Theory for the Clustering of Rapidly Settling, Low-Inertia Particle Pairs in Isotropic Turbulence - I

NASA Astrophysics Data System (ADS)

Gupta, Vijay; Rani, Sarma; Koch, Donald

2017-11-01

A stochastic theory is developed to predict the Radial Distribution Function (RDF) of monodisperse, rapidly settling, low-inertia particle pairs in isotropic turbulence. The theory is based on approximating the turbulent flow in a reference frame following an aerosol particle as a locally linear velocity field. In the first version of the theory (referred to as T1), the fluid velocity gradient tensor ``seen'' by the primary aerosol particle is further assumed to be Gaussian. Analytical closures are then derived for the drift and diffusive fluxes controling the RDF, in the asymptotic limits of small particle Stokes number (St =τp /τη << 1), and large dimensionless settling velocity (Sv = gτp /uη >> 1). It is seen that the RDF for rapidly settling pairs has an inverse power dependency on pair separation r with an exponent, c1, that is proportional to St2 . However, the c1 predicted by T1 for Sv >> 1 particles is higher than the c1 of even non-settling (Sv = 0) particles obtained from DNS of particle-laden isotropic turbulence. Thus, the Gaussian velocity gradient in T1 leads to the unphysical effect that gravity enhances pair clustering. To address this inconsistency, a second version (T2) was developed. Funding from the CBET Division of the National Science Foundation is gratefully acknowledged.

Self-similar hot accretion flow onto a neutron star

NASA Astrophysics Data System (ADS)

Medvedev, Mikhail V.

2001-10-01

We present analytical and numerical solutions which describe a hot, viscous, two-temperature accretion flow onto a neutron star or any other compact star with a surface. We assume Coulomb coupling between the protons and electrons, and free-free cooling from the electrons. Outside a thin boundary layer, where the accretion flow meets the star, we show that there is an extended settling region which is well-described by two self-similar solutions: (1) a two-temperature solution which is valid in an inner zone r<=102.5 (r is in Schwarzchild units), and (2) a one-temperature solution at larger radii. In both zones, ρ~r-2, Ω~r-3/2, v~r0, Tp~r-1 in the two-temperature zone, Te~r-1/2. The luminosity of the settling zone arises from the rotational energy of the star as the star is braked by viscosity; hence the luminosity is independent of Ṁ. The settling solution is convectively and viscously stable and is unlikely to have strong winds or outflows. The flow is thermally unstable, but the instability may be stabilized by thermal conduction. The settling solution described here is not advection-dominated, and is thus different from the self-similar ADAF found around black holes. When the spin of the star is small enough, however, the present solution transforms smoothly to a (settling) ADAF. .

On the flocculation and settling characteristics of low- and high-concentration sediment suspensions: effects of particle concentration and salinity conditions.

PubMed

Zhu, Zhongfan; Xiong, Xiangzhong; Liang, Chaohuang; Zhao, Ming

2018-05-01

It remains unclear how the primary particle concentration and salinity conditions influence the flocculation and settling characteristics of water-sediment suspensions. In this study, two sets of experiments were performed to examine the flocculation and settling properties of low- and high-concentration sediment suspensions. In low-concentration suspensions, the sediment concentration undergoes a rapid initial decrease followed by a slow decrease until it approaches zero with increasing flocculation time. Increases in salinity or the valence of cations from the saline solution added to the suspension lead to a more rapidly decreasing sediment concentration with flocculation time. The valence of cations from the saline solution has a larger influence on the flocculation-settling behaviours of the suspension than the salinity. In high-concentration sediment suspensions, the height of the clear water-turbid water interface in the water-sediment suspension experiences an initial, rapidly decreasing phase followed by a slowly decreasing phase with increasing flocculation time. Increasing the primary particle concentration, salinity or valence of cations from the saline solution added to the suspension causes the height reduction of the clear water-turbid water interface to become gentler. Finally, the valence of cations from the saline solution has a greater influence on the settling characteristics of the high-concentration water-sediment suspension than the salinity.

Crystal accumulation in the Hanford Waste Treatment Plant high level waste melter. Preliminary settling and resuspension testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fox, K. M.; Fowley, M. D.; Miller, D. H.

2016-05-01

The full-scale, room-temperature Hanford Tank Waste Treatment and Immobilization Plant (WTP) High-Level Waste (HLW) melter riser test system was successfully operated with silicone oil and magnetite particles at a loading of 0.1 vol %. Design and construction of the system and instrumentation, and the selection and preparation of simulant materials, are briefly reviewed. Three experiments were completed. A prototypic pour rate was maintained, based on the volumetric flow rate. Settling and accumulation of magnetite particles were observed at the bottom of the riser and along the bottom of the throat after each experiment. The height of the accumulated layer atmore » the bottom of the riser, after the first pouring experiment, approximated the expected level given the solids loading of 0.1 vol %. More detailed observations of particle resuspension and settling were made during and after the third pouring experiment. The accumulated layer of particles at the bottom of the riser appeared to be unaffected after a pouring cycle of approximately 15 minutes at the prototypic flow rate. The accumulated layer of particles along the bottom of the throat was somewhat reduced after the same pouring cycle. Review of the time-lapse recording showed that some of the settling particles flow from the riser into the throat. This may result in a thicker than expected settled layer in the throat.« less

Theoretical analysis on non-uniformity of water distribution and influence of construction parameters on settling efficiency.

PubMed

Huang, Ting-Lin; Li, Yu-Xian; Zhang, Hui

2008-01-01

During the reconstruction of horizontal flow tanks into inclined settling tanks in Chinese water plants, uniformity of water distribution has not been solved theoretically. Based on the concepts of hydraulics, a model of inclined tanks, including the ratio (L/B) of tank length (L) to width (B), diameter of inclined tubes (d) and height of the water distribution area (h1) and so on, was established to simulate and analyze the effects of these parameters on Non-Uniformity of Water Distribution (NUWD). The influences of NUWD on settling efficiency were also analyzed based on Yao's formula. Simulated results show that the ratio (L/B) has the greatest impact on NUWD, and the settling efficiency decreases with it. Under the conditions of q=10 or 20 m/h and L/B>or=5 or 3, the total forces imposed on down-sliding flocs tend to be zero, which reduces the separating efficiency. Moreover, critical settling velocity (CSV) of the first inclined tube will decrease with the increase of h1, and the optimal range of h1 will be 1.2-1.6 m. The difference of CSV between the first tube and the average value of the tank u0 (shown as Delta(uF0-u0)) will increase with d and surface load (q). Copyright IWA Publishing 2008.

75 FR 20656 - Bureau of Educational and Cultural Affairs (ECA) Request for Grant Proposals: smART Power: Visual...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-20

... specific projects must demonstrate high artistic ability, excellent interpersonal skills, and be conversant... progress towards outcomes or the results achieved. Examples of outputs include the number of people trained...

7 CFR 3017.635 - May the Department of Agriculture settle a debarment or suspension action?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 15 2010-01-01 2010-01-01 false May the Department of Agriculture settle a debarment or suspension action? 3017.635 Section 3017.635 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF THE CHIEF FINANCIAL OFFICER, DEPARTMENT OF AGRICULTURE GOVERNMENTWIDE...

41 CFR 102-118.480 - How does my agency settle disputes with a TSP?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false How does my agency settle disputes with a TSP? 102-118.480 Section 102-118.480 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION TRANSPORTATION...

45 CFR 681.42 - Can the administrative complaint be settled voluntarily?

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 3 2010-10-01 2010-10-01 false Can the administrative complaint be settled voluntarily? 681.42 Section 681.42 Public Welfare Regulations Relating to Public Welfare (Continued) NATIONAL SCIENCE FOUNDATION PROGRAM FRAUD CIVIL REMEDIES ACT REGULATIONS Decisions and Appeals § 681.42 Can the...

13 CFR 142.38 - Can the administrative complaint be settled voluntarily?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Can the administrative complaint be settled voluntarily? 142.38 Section 142.38 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES ACT REGULATIONS Decisions and Appeals § 142.38 Can the administrative...

22 CFR 21.1 - Policy.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Department of State may settle or compromise a personal damages claim against an employee by the payment of available funds at any time, provided the alleged conduct giving rise to the personal damages claim was... request either to agree to indemnify or to settle a personal damages claim before entry of an adverse...

22 CFR 21.1 - Policy.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Department of State may settle or compromise a personal damages claim against an employee by the payment of available funds at any time, provided the alleged conduct giving rise to the personal damages claim was... request either to agree to indemnify or to settle a personal damages claim before entry of an adverse...

VIEW LOOKING SOUTHEAST TOWARD WEST SIDE OF SETTLING RESERVOIR NO. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW LOOKING SOUTHEAST TOWARD WEST SIDE OF SETTLING RESERVOIR NO. 1. THE BLAISDELL SLOW SAND FILTER WASHING MACHINE IS SEEN AT THE LEFT. MAIN STREET IS IN THE FOREGROUND. - Yuma Main Street Water Treatment Plant, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

48 CFR 49.108-6 - Delay in settling subcontractor settlement proposals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Delay in settling subcontractor settlement proposals. 49.108-6 Section 49.108-6 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION CONTRACT MANAGEMENT TERMINATION OF CONTRACTS General Principles 49.108-6 Delay in...

75 FR 10798 - Richard J. Stanton; Analysis of Proposed Consent Order to Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-09

... Order to Aid Public Comment AGENCY: Federal Trade Commission. ACTION: Proposed Consent Agreement. SUMMARY: The consent agreement in this matter settles alleged violations of federal law prohibiting unfair... -- embodied in the consent agreement -- that would settle these allegations. DATES: Comments must be received...

Extended characterization of M-Area settling basin and vicinity. Technical data summary. Revision

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pickett, J B

1985-10-01

The Savannah River Plant M-Area settling basin, an unlined surface impoundment, has received process effluents from the M-Area fuel and target fabrication facilities since 1958. The waste effluents have contained metal degreasing agents (chlorinated hydrocarbons), acids, caustics, and heavy metals. Data analyses are provided.

75 FR 22785 - Proposed Administrative Settlement Agreement Under Section 122 of the Comprehensive Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-30

... Leaman Tank Lines, Inc. Superfund Site Located in Logan Township, Gloucester County, NJ AGENCY..., Inc. (the ``Settling Party'') pursuant to Section 122 of the Comprehensive Environmental Response, Compensation, and Liability Act (``CERCLA''), 42 U.S.C. 9622. The Settlement Agreement provides for Settling...

78 FR 76143 - Proposed CERCLA Settlement Relating to the Paul's Tank Cleaning Service Superfund Site...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-16

... Paul's Tank Cleaning Service Superfund Site, Burlington County, New Jersey AGENCY: Environmental.... (``Settling Party''). The Settling Party is a potentially responsible party, pursuant to Section 107(a) of CERCLA, and thus is potentially liable for response costs incurred at or in connection Paul's Tank...

USE OF METAL- AND FLUORESCEIN-TAGGED MATERIALS TO STUDY SETTLED PARTICLES EXPOSURE PATHWAYS

EPA Science Inventory

Through the use of ten size ranges of tagged materials (Antley et. al., 2000a), inductively coupled plasma- mass spectrometry (ICP-MS) and flourometry are being used to study the movement of settled particles in the indoor environment, exposure pathways, and the collection effi...

Geographic Distribution of Environmental Relative Moldiness Index (ERMI) in U.S. Homes

EPA Science Inventory

The objective of this study was to quantify and describe the distribution of the 36 settled dust molds that make up the Environmental Relative Moldiness Index (ERMI). Materials and Methods. As part of the 2006 American Healthy Homes Survey, settled dust samples were analyzed by ...

Analysis backpropagation methods with neural network for prediction of children's ability in psychomotoric

NASA Astrophysics Data System (ADS)

Izhari, F.; Dhany, H. W.; Zarlis, M.; Sutarman

2018-03-01

A good age in optimizing aspects of development is at the age of 4-6 years, namely with psychomotor development. Psychomotor is broader, more difficult to monitor but has a meaningful value for the child's life because it directly affects his behavior and deeds. Therefore, there is a problem to predict the child's ability level based on psychomotor. This analysis uses backpropagation method analysis with artificial neural network to predict the ability of the child on the psychomotor aspect by generating predictions of the child's ability on psychomotor and testing there is a mean squared error (MSE) value at the end of the training of 0.001. There are 30% of children aged 4-6 years have a good level of psychomotor ability, excellent, less good, and good enough.

Work ability index and perceived work ability as predictors of disability pension: a prospective study among Finnish municipal employees.

PubMed

Jääskeläinen, Anne; Kausto, Johanna; Seitsamo, Jorma; Ojajärvi, Anneli; Nygård, Clas-Håkan; Arjas, Elja; Leino-Arjas, Päivi

2016-06-01

We analyzed the work ability index (WAI) and its first item (work ability score, WAS) - and subsequent four-year changes thereof - as predictors of disability pension (DP). We linked survey responses of 5251 Finnish municipal employees, aged 44-58 years, to pension and death register data until 2009. Job content (physical, mental, or mixed) was based on observation. Baseline (1981) WAI was divided into poor (<27), moderate (28-36), and good/excellent (>37) and WAS into poor (0-5), moderate (6-7), and good/excellent (8-10). Four-year changes in these scores were classified as strong decline (

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gavignet, A.A.; Wick, C.J.

In current practice, pressure drops in the mud circulating system and the settling velocity of cuttings are calculated with simple rheological models and simple equations. Wellsite computers now allow more sophistication in drilling computations. In this paper, experimental results on the settling velocity of spheres in drilling fluids are reported, along with rheograms done over a wide range of shear rates. The flow curves are fitted to polynomials and general methods are developed to predict friction losses and settling velocities as functions of the polynomial coefficients. These methods were incorporated in a software package that can handle any rig configurationmore » system, including riser booster. Graphic displays show the effect of each parameter on the performance of the circulating system.« less

Stochastic growth of cloud droplets by collisions during settling

NASA Astrophysics Data System (ADS)

Madival, Deepak G.

2018-04-01

In the last stage of droplet growth in clouds which leads to drizzle formation, larger droplets begin to settle under gravity and collide and coalesce with smaller droplets in their path. In this article, we shall deal with the simplified problem of a large drop settling amidst a population of identical smaller droplets. We present an expression for the probability that a given large drop suffers a given number of collisions, for a general statistically homogeneous distribution of droplets. We hope that our approach will serve as a valuable tool in dealing with droplet distribution in real clouds, which has been found to deviate from the idealized Poisson distribution due to mechanisms such as inertial clustering.

Rational Design and Synthesis of Carboxylate Gemini Surfactants with an Excellent Aggregate Behavior for Nano-La2O3 Morphology-Controllable Preparation.

PubMed

Liao, Xueming; Gao, Zhinong; Xia, Yan; Niu, Fei; Zhai, Wenzhong

2017-04-04

A series of carboxylate gemini surfactants (CGS, C n -Φ-C n , n = 12, 14, 16, 18) with diphenyl ketone as a spacer group were prepared using a simple and feasible synthetic method. These CGS exhibited an excellent surface activity with extremely low critical micelle concentration (CMC) value (approximately 10 -5 mol/L), good performance in reducing surface tension (nearly 30 mN/m), and the ability of molecular self-assembly into different aggregate morphologies via adjusting the concentrations, which is attributed to the introduction of diphenyl ketone and carboxylic acid ammonium salt in the molecular structure. Moreover, the surface activity and self-assembly ability of CGS were further optimized by tuning the length of the tail chain. These excellent properties imply that CGS can be a soft template to prepare nanomaterials, especially in morphology-controllable synthesis. By adjusting the concentration of one of CGS (C 12 -Φ-C 12 ), nano-La 2 O 3 particles with diverse morphologies were obtained, including spherical shape, bead-chain shape, rod shape, velvet-antler shape, cedar shape, and bowknot shape. This work offers a vital insight into the rational design of template agents for the development of morphology-controllable nanomaterials.

77 FR 52021 - Proposed CERCLA Administrative Settlement Agreement and Order on Consent for the Mercury Refining...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... and Order on Consent for the Mercury Refining Superfund Site, Towns of Guilderland and Colonie, Albany... Management of Michigan, Inc. (hereafter ``Settling Parties'') pertaining to the Mercury Refining Superfund... Superfund Mercury Refining Superfund Site Special Account, which combined total $79,028.49. Each Settling...

2 CFR 180.635 - May a Federal agency settle a debarment or suspension action?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false May a Federal agency settle a debarment or suspension action? 180.635 Section 180.635 Grants and Agreements OFFICE OF MANAGEMENT AND BUDGET GOVERNMENTWIDE GUIDANCE FOR GRANTS AND AGREEMENTS Reserved OMB GUIDELINES TO AGENCIES ON GOVERNMENTWIDE DEBARMENT...

76 FR 60493 - Settlement Agreements for Recovery of Past Response Costs; Granite Timber Post and Pole Site...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... Costs; Granite Timber Post and Pole Site, Philipsburg, Granite County, MT AGENCY: Environmental... Agency (EPA) and Margery Metesh (Settling Party) and Mark Metesh (Settling Party), regarding the Granite... Granite County, Montana. The Settlement Agreements propose to compromise a claim the United States has at...

77 FR 60489 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-03

... Effectiveness of a Proposed Rule To Eliminate Position and Exercise Limits for Physically- Settled SPY Options... Proposed Rule Change CBOE proposes to amend its rules to eliminate position and exercise limits for... eliminate position and exercise limits for physically-settled SPY options pursuant to a pilot program.\\5...

75 FR 17805 - Self-Regulatory Organizations; the Options Clearing Corporation; Notice of Filing of Proposed...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

...-Settled Foreign Currency Options With One-Cent Exercise Prices April 1, 2010. Pursuant to Section 19(b)(1... currency options traded on national securities exchanges will be treated and cleared as securities options...- settled foreign currency options traded on national securities exchanges will be treated and cleared as...

76 FR 30320 - Public Scoping Meeting and Preparation of Environmental Impact Statement for Luce Bayou...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-25

... involvement associated with the proposed action is the discharge or dredged or fill material into waters of... affect navigable waters. Federal authorizations for the proposed project would constitute a ``major... sedimentation settling basin. c. An approximate 20-acre sedimentation settling and storage basin. d. An...

37 CFR 10.67 - Settling similar claims of clients.

Code of Federal Regulations, 2010 CFR

2010-07-01

... clients. 10.67 Section 10.67 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE... Office Code of Professional Responsibility § 10.67 Settling similar claims of clients. A practitioner who represents two or more clients shall not make or participate in the making of an aggregate settlement of the...

PERSISTENT ORGANIC POLLUTANTS IN DUSTS THAT SETTLED AT INDOOR AND OUTDOOR LOCATIONS IN LOWER MANHATTAN AFTER 11 SEPTEMBER, 2001

EPA Science Inventory

During the initial days that followed the explosion and collapse of the World Trade Center (WTC) on September 11th, 2001, fourteen bulk samples of settled dusts were collected at locations surrounding the epicenter of the disaster, and analyzed for persistent organic pollutants, ...

Settling dynamics of asymmetric rigid fibers

Treesearch

E.J. Tozzi; C Tim Scott; David Vahey; D.J. Klingenberg

2011-01-01

The three-dimensional motion of asymmetric rigid fibers settling under gravity in a quiescent fluid was experimentally measured using a pair of cameras located on a movable platform. The particle motion typically consisted of an initial transient after which the particle approached a steady rate of rotation about an axis parallel to the acceleration of gravity, with...

29 CFR 1471.635 - May the Federal Mediation and Conciliation Service settle a debarment or suspension action?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false May the Federal Mediation and Conciliation Service settle a...) FEDERAL MEDIATION AND CONCILIATION SERVICE GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) General Principles Relating to Suspension and Debarment Actions § 1471.635 May the Federal Mediation and...

2 More Universities Settle with Cuomo in Lender Controversy

ERIC Educational Resources Information Center

Field, Kelly; Keller, Josh

2007-01-01

The ever-expanding investigation into conflicts of interest between colleges and lenders continued to claim victims last week as two more universities settled with New York State's attorney general, and another fired its financial-aid director. Drexel University, the only institution that had said it would fight allegations over its student-loan…

17 CFR 240.31 - Section 31 transaction fees.

Code of Federal Regulations, 2010 CFR

2010-04-01

... of a security future settled by physical delivery) or covered round turn transaction that a covered... resulting from the maturation of a security future settled by physical delivery; and (iv) The trade date.... (6) Covered sale means a sale of a security, other than an exempt sale or a sale of a security future...

40 CFR 1620.6 - Authority to adjust, determine, compromise, and settle.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Authority to adjust, determine, compromise, and settle. 1620.6 Section 1620.6 Protection of Environment CHEMICAL SAFETY AND HAZARD... Chairperson or any other lawful designee can only be made after a legal review is conducted by an attorney...

40 CFR 1620.6 - Authority to adjust, determine, compromise, and settle.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 33 2014-07-01 2014-07-01 false Authority to adjust, determine, compromise, and settle. 1620.6 Section 1620.6 Protection of Environment CHEMICAL SAFETY AND HAZARD... Chairperson or any other lawful designee can only be made after a legal review is conducted by an attorney...

40 CFR 1620.6 - Authority to adjust, determine, compromise, and settle.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 34 2013-07-01 2013-07-01 false Authority to adjust, determine, compromise, and settle. 1620.6 Section 1620.6 Protection of Environment CHEMICAL SAFETY AND HAZARD... Chairperson or any other lawful designee can only be made after a legal review is conducted by an attorney...

TESTING SOLIDS SETTING APPARATUSES FOR DESIGN AND OPERATION OF WET-WEATHER FLOW SOLIDS-LIQUID SEPARATION PROCESSES

EPA Science Inventory

This study was a side-by-side comparison of two settling evaluation methods: one traditional and one new. The project investigated whether these column tests were capable of capturing or representing the rapidly settling particles present in wet-weather flows (WWF). The report r...

Flow quality experiment in a tandem nozzle wind tunnel at Mach 3

NASA Astrophysics Data System (ADS)

Wu, Jie; Zamre, Pradip; Radespiel, Rolf

2015-01-01

In this study, the disturbance characterization and flow quality improvement of a newly designed Tandem Nozzle Mach 3 Wind Tunnel are presented. Firstly, a combined modal analysis is conducted to characterize the freestream disturbances with initial set-up of the settling chamber by using a Pitot probe and a hot-wire anemometry. Then, disturbance reduction in the supersonic wind tunnel is investigated by inserting various damping materials into the settling chamber, while a Pitot probe instrumented with Kulite sensor is employed to monitor the variation of the Pitot pressure fluctuation in the test section. Eventually, an optimized configuration of the settling chamber is determined by a combination of certain damping materials. Afterward, the freestream disturbances are re-characterized with the optimized set-up of the settling chamber, and the disturbance level is found to be significantly reduced. Through this study, valuable experience has been acquired for the disturbance reduction in tandem nozzle type supersonic wind tunnel for the first time, which enhances the feasibility of extending the operation range of conventional hypersonic Ludwieg tubes.

The solids-flux theory--confirmation and extension by using partial differential equations.

PubMed

Diehl, Stefan

2008-12-01

The solids-flux theory has been used for half a century as a tool for estimating concentration and fluxes in the design and operation of secondary settling tanks during stationary conditions. The flux theory means that the conservation of mass is used in one dimension together with the batch-settling flux function according to the Kynch assumption. The flux theory results correspond to stationary solutions of a partial differential equation, a conservation law, with discontinuous coefficients modelling the continuous-sedimentation process in one dimension. The mathematical analysis of such an equation is intricate, partly since it cannot be interpreted in the classical sense. Recent results, however, make it possible to partly confirm and extend the previous flux theory statements, partly draw new conclusions also on the dynamic behaviour and the possibilities and limitations for control. We use here a single example of an ideal settling tank and a given batch-settling flux in a whole series of calculations. The mathematical results are adapted towards the application and many of them are conveniently presented in terms of operating charts.

Grain-resolving simulations of settling cohesive sediment

NASA Astrophysics Data System (ADS)

Vowinckel, Bernhard; Whithers, Jade; Meiburg, Eckart; Luzzatto-Fegiz, Paolo

2017-11-01

Cohesive sediment is ubiquitous in natural environments such as rivers, lakes and coastal ecosystems. For this type of sediment, we can no longer ignore the short-range attractive forces that result in flocculation of aggregates much larger than the individual grain size. Hence, understanding the complex dynamics of the interplay between flocculated sediment and the ambient fluid is of prime interest for managing aquatic environments, although a comprehensive understanding of these phenomena is still lacking. In the present study, we address this issue by carrying out grain-resolved simulations of cohesive particles settling under gravity using the Immersed Boundary Method. We present a computational model formulation to accurately resolve the process of flocculation. The cohesive model is then applied to a complex test case. A randomly distributed ensemble of 1261 polydisperse particles is released in a tank of quiescent fluid. Subsequently, particles start to settle, thereby replacing fluid at the bottom of the tank, which induces a counter flow opposing the settling direction. This mechanism will be compared to experimental studies from the literature, as well as to the non-cohesive counterpart to assessthe impact of flocculation on sedimentation.

The effect of repeated torque tightening on total lengths of implant abutments in different internal implant‒abutment connections.

PubMed

Saleh Saber, Fariba; Abolfazli, Nader; Jannatii Ataei, Soheil; Taghizade Motlagh, Mahsa; Gharekhani, Vahede

2017-01-01

Background. Since the misfit of crown has an important role in clinical performance of implant-supported prostheses, and due to the impact of the settling effect on misfit, the aim of this study was to investigate the impact of torque forces on the total lengths of narrow and short implant abutments in different internal implant‒abutment connections. Methods. In four different implant‒abutment connections, 8 analog implants with a normal diameter (4 mm) and narrow abutment (4.5 mm) were selected from groups of internal hex, internal octagon, morse hex 6° and morse hex 11°. Each of them was mounted within plaster type IV, and 32 samples were obtained. Then, the amount of vertical displacement was measured by closing the impression copings and applying torques of 20 25 and 30 Ncm. This stage was repeated for the abutment. In the next stage, the resin pattern was built and measurements were performed after applying the torques mentioned. Finally, after making the frame, this stage was repeated, and the settling effect was statistically analyzed with ANOVA. Results. In the stages of impression coping, resin pattern and final prosthesis, HEXAGONE had significantly the highest and OCTAGONE had the lowest rates of settling, and the settling of morse hex 11° and 6° was between them. Conclusion. Octagon implant had significantly the lowest settling in various clinical and laboratory stages by applying different torques.

The effect of repeated torque tightening on total lengths of implant abutments in different internal implant‒abutment connections

PubMed Central

Saleh Saber, Fariba; Abolfazli, Nader; Jannatii Ataei, Soheil; Taghizade Motlagh, Mahsa; Gharekhani, Vahede

2017-01-01

Background. Since the misfit of crown has an important role in clinical performance of implant-supported prostheses, and due to the impact of the settling effect on misfit, the aim of this study was to investigate the impact of torque forces on the total lengths of narrow and short implant abutments in different internal implant‒abutment connections. Methods. In four different implant‒abutment connections, 8 analog implants with a normal diameter (4 mm) and narrow abutment (4.5 mm) were selected from groups of internal hex, internal octagon, morse hex 6° and morse hex 11°. Each of them was mounted within plaster type IV, and 32 samples were obtained. Then, the amount of vertical displacement was measured by closing the impression copings and applying torques of 20 25 and 30 Ncm. This stage was repeated for the abutment. In the next stage, the resin pattern was built and measurements were performed after applying the torques mentioned. Finally, after making the frame, this stage was repeated, and the settling effect was statistically analyzed with ANOVA. Results. In the stages of impression coping, resin pattern and final prosthesis, HEXAGONE had significantly the highest and OCTAGONE had the lowest rates of settling, and the settling of morse hex 11° and 6° was between them. Conclusion. Octagon implant had significantly the lowest settling in various clinical and laboratory stages by applying different torques. PMID:28748052

Monitoring and troubleshooting of non-filamentous settling and dewatering problems in an industrial activated sludge treatment plant.

PubMed

Kjellerup, B V; Keiding, K; Nielsen, P H

2001-01-01

A large industrial activated sludge wastewater treatment plant had temporary problems with settling and dewatering of the sludge. Microscopical investigations revealed that the poor settling properties were not due to presence of filamentous bacteria, but poor floc properties. In order to characterise the changes in floc properties that led to settling and dewatering problems and to find reasons for this taking place, a comprehensive monitoring program was conducted during more than one year. The monitoring program included various measurements of floc settleability, floc strength and sludge dewaterability. The monitoring program revealed that a deterioration of the floc strength and the settling properties in the process tanks was closely connected to downstream dewatering problems and poor effluent quality. Particularly severe problems were observed a few weeks after the production at the factory had started after summer closedown. Possible reasons for the changes in floc properties in the process tanks were found by a) analysing change in wastewater composition by evaluating the different production lines in the industrial plant, b) evaluating the operation of the plant, and c) performing short-term laboratory experiments testing factors that could potentially affect floc properties (absence of oxygen, presence of sulphide, detergents, etc). Among several measured parameters, the use of floc strength measurements in particular proved useful to monitor the activated sludge floc properties at this industrial plant. The described strategy can be useful in general to find and solve many solid/liquid separation problems in activated sludge wastewater treatment plants.

Resuspension and settling of helminth eggs in water: Interactions with cohesive sediments.

PubMed

Sengupta, Mita E; Andersen, Thorbjørn J; Dalsgaard, Anders; Olsen, Annette; Thamsborg, Stig M

2012-08-01

Helminth parasite eggs in low quality water represent main food safety and health hazards and are therefore important indicators used to determine whether such water can be used for irrigation. Through sedimentation helminth eggs accumulate in the sediment, however resuspension of deposited helminth eggs will lead to increased concentration of suspended eggs in the water. Our study aimed to determine the erodibility (erosion rate and erosion threshold) and settling velocity of Ascaris and Trichuris eggs as well as cohesive sediment at different time points after incorporation into the sediment. Cohesive sediment collected from a freshwater stream was used to prepare a sediment bed onto which helminth eggs were allowed to settle. The erodibility of both sediment and helminth eggs was found to decrease over time indicating that the eggs were incorporated into the surface material of the bed and that this material was stabilized through time. This interaction between eggs and bulk sediment was further manifested in an increased settling velocity of suspended eggs when sediment was present in the suspension as compared to a situation with settling in clean water. The incorporation into the sediment bed and the aggregation with sediment particles decrease the mobility of both helminth egg types. Our findings document that helminth eggs should not be viewed as single entities in water systems when modelling the distribution of eggs since both erodibility and settling velocity of eggs are determined by mobility of the sediment present in the water stream. Recalculation of the erosion threshold for helminth eggs and sediment showed that even at relatively low current velocities i.e. 0.07-0.12ms(-1) newly deposited eggs will be mobile in open irrigation channels. These environmental factors affecting resuspension must be taken into account when developing models for sedimentation of helminth eggs in different water systems. Copyright © 2012 Elsevier Ltd. All rights reserved.

Constraining particle size-dependent plume sedimentation from the 17 June 1996 eruption of Ruapehu Volcano, New Zealand, using geophysical inversions

NASA Astrophysics Data System (ADS)

Klawonn, M.; Frazer, L. N.; Wolfe, C. J.; Houghton, B. F.; Rosenberg, M. D.

2014-03-01

Weak subplinian-plinian plumes pose frequent hazards to populations and aviation, yet many key parameters of these particle-laden plumes are, to date, poorly constrained. This study recovers the particle size-dependent mass distribution along the trajectory of a well-constrained weak plume by inverting the dispersion process of tephra fallout. We use the example of the 17 June 1996 Ruapehu eruption in New Zealand and base our computations on mass per unit area tephra measurements and grain size distributions at 118 sample locations. Comparisons of particle fall times and time of sampling collection, as well as observations during the eruption, reveal that particles smaller than 250 μm likely settled as aggregates. For simplicity we assume that all of these fine particles fell as aggregates of constant size and density, whereas we assume that large particles fell as individual particles at their terminal velocity. Mass fallout along the plume trajectory follows distinct trends between larger particles (d≥250 μm) and the fine population (d<250 μm) that are likely due to the two different settling behaviors (aggregate settling versus single-particle settling). In addition, we computed the resulting particle size distribution within the weak plume along its axis and find that the particle mode shifts from an initial 1φ mode to a 2.5φ mode 10 km from the vent and is dominated by a 2.5 to 3φ mode 10-180 km from vent, where the plume reaches the coastline and we do not have further field constraints. The computed particle distributions inside the plume provide new constraints on the mass transport processes within weak plumes and improve previous models. The distinct decay trends between single-particle settling and aggregate settling may serve as a new tool to identify particle sizes that fell as aggregates for other eruptions.

The formation of ore mineral deposits on the Moon: A feasibility study

NASA Technical Reports Server (NTRS)

Taylor, Lawrence A.; Lu, Fengxiang

1992-01-01

Most of the ore deposits on Earth are the direct result of formation by hydrothermal solutions. Analogous mineral concentrations do not occur on the Moon, however, because of the absence of water. Stratified ore deposits form in layered instrusives on Earth due to fractional crystallization of magma and crystal settling of high-density minerals, particularly chromium in the mineral chromite. We have evaluated the possibility of such mineral deposition on the Moon, based upon considerations of 'particle settling velocities' in lunar vs. terrestrial magmas. A first approximation of Stoke's Law would seem to indicate that the lower lunar gravity (1/6 terrestrial) would result in slower crystal settling on the Moon. However, the viscosity of the silicate melt is the most important factor affecting the settling velocity. The viscosities of typical lunar basaltic melts are 10-100 times less than their terrestrial analogs. These lower viscosities result from two factors: (1) lunar basaltic melts are typically higher in FeO and lower in Al2O3, Na2O, and K2O than terrestrial melts; and (2) lunar igneous melts and phase equilibria tend to be 100-150 C higher than terrestrial, largely because of the general paucity of water and other volatile phases on the Moon. Therefore, particle settling velocities on the Moon are 5-10 times greater than those on Earth. It is highly probable that stratiform ore deposits similar to those on Earth exist on the Moon. The most likely ore minerals involved are chromite, ilmenite, and native FeNi metal. In addition, the greater settling velocities of periodotite in lunar magmas indicate that the buoyancy effects of the melt are less than on Earth. Consequently, the possibility is considerably less than on Earth of deep-seated volcanism transporting upper mantle/lower crustal xenoliths to the surface of the Moon, such as occurs in kimberlites on Earth.

Characterisation of coal washery effluent and optimisation of coagulation behaviour of Moringa oleifera seed as a coagulant.

PubMed

Kapse, Gaurav; Patoliya, Pruthvi; Samadder, S R

2017-03-01

The huge quantity of effluent generated in coal washing processes contains large amount of suspended and dissolved solids, clay minerals, coal fines and other impurities associated with raw coal. The present system of recirculation of the effluent is found to be ineffective in removing colloidal fines, which is the major part of the impurities present in washery effluent. Hence, there is a need for the assessment of a better technique for an efficient removal of these impurities. This study deals with detailed characterisation of coal washery effluent and fine particles present in it. For efficient removal of impurities, the suitability of biocoag-flocculation process using Moringa oleifera seed biomass as a natural coagulant was examined. Various doses of M. oleifera ranging from 0.2 to 3 mL/L were used in order to determine the optimal conditions. The impact of the variations in pH of the effluent (2-10), contact time (5-30 min), settlement time (5-50 min), temperature (10-50 °C) and the effluent dilution (1:0-1:5) was also assessed to optimise the treatment process. Post treatment analysis was carried out for determination of the different parameters such as pH, conductivity, turbidity, solids and settling velocity. Excellent reduction in turbidity (97.42%) and suspended solids (97.78%) was observed at an optimum dose of M. oleifera seed coagulant of 0.8 mL/L with an optimum contact time of 15 and at 20 min of settling time. In comparison with very few past studies of M. oleifera in the treatment of coal washery effluent with high dose and inadequate removal, this study stands to be a major highlight with low dose and high removal of the impurities. M. oleifera coagulant is considered to be an environment-friendly material, therefore, its application is recommended for simple and efficient treatment of coal washery effluent.

Influence of operational conditions on the performance of a mesh filter activated sludge process.

PubMed

Fuchs, W; Resch, C; Kernstock, M; Mayer, M; Schoeberl, P; Braun, R

2005-03-01

Recently, a new type of wastewater treatment system became the focus of scientific research, the mesh filter activated sludge system. It is a modification of the membrane bioreactor where a membrane filtration process serves to separate the sludge from the purified effluent. The difference is that a mesh filter is used instead of the membrane. Due to the much larger pore size of the mesh, the effluent is not of the same excellent quality as with membrane bioreactors. Nevertheless, it still resembles the quality of the now most widely used standard treatment system, where settling tanks are used to retain the activated sludge. At the same time, the new system features all the other advantages of membrane bioreactors including elevated sludge concentrations resulting in decreased volumina of basins and complete substitution of the settling tank. Therefore, this process presents a potential future alternative where a small footprint of the plant is required. However, so far only a few preliminary studies on this innovative process type have been done. In this paper, the effects of suspended solids concentration, flux rate as well as aeration rate on the effluent quality are discussed. Furthermore, the characteristic of the sludge floc was identified as a factor of vital importance. Therefore, another influencing parameter, the food to microorganism (F/M) ratio, which is known to have a significant effect on floc characteristics, was studied. The main result demonstrated that the process was very effective under most of the operation conditions. The suspended solids concentration in the effluent was below 12 mg l(-1), the average COD in the effluent was between 24 and 45 mg l(-1) and the BOD(5) was lower than 5 mg l(-1). High flux rates of up to 150 l m(-2)h(-1) were also achieved.

Predictive power of the DASA-IV: Variations in rating method and timescales.

PubMed

Nqwaku, Mphindisi; Draycott, Simon; Aldridge-Waddon, Luke; Bush, Emma-Louise; Tsirimokou, Alexandra; Jones, Dominic; Puzzo, Ignazio

2018-05-10

This project evaluated the predictive validity of the Dynamic Appraisal of Situational Aggression - Inpatient Version (DASA-IV) in a high-secure psychiatric hospital in the UK over 24 hours and over a single nursing shift. DASA-IV scores from three sequential nursing shifts over a 24-hour period were compared with the mean (average of three scores across the 24-hour period) and peak (highest of the three scores across the 24-hour period) scores across these shifts. In addition, scores from a single nursing shift were used to predict aggressive incidents over each of the following three shifts. The DASA-IV was completed by nursing staff during handover meetings, rating 43 male psychiatric inpatients over a period of 6 months. Data were compared to incident reports recorded over the same period. Receiver operating characteristic (ROC) curves and generalized estimating equations assessed the predictive ability of various DASA-IV scores over 24-hour and single-shift timescales. Scores from the DASA-IV based on a single shift had moderate predictive ability for aggressive incidents occurring the next calendar day, whereas scores based on all three shifts had excellent predictive ability. DASA-IV scores from a single shift showed moderate predictive ability for each of the following three shifts. The DASA-IV has excellent predictive ability for aggressive incidents within a secure setting when data are summarized over a 24-hour period, as opposed to when a single rating is taken. In addition, it has moderate value for predicting incidents over even shorter timescales. © 2018 Australian College of Mental Health Nurses Inc.

Nonlinear Propagation of Sound in Recently Settled Flocculated Sediments

NASA Astrophysics Data System (ADS)

Reed, A. H.; Sanders, W. M.

2016-12-01

Cohesive sediments undergo changes in a whirlwind. Dumped out of the river and into the estuary, they get bathed in salty water and subject to turbulent motion. During this sequence of events, the clay particles form clay aggregates of larger size with higher settling rates than the clay particles. Once the flocs have settled, cohesive sediments may form a sediment deposit of mud. Our interest is in the factors that control the development of soundspeed within these muds. This paper addresses organic matter influences on floc aggregation and settling rates. In laboratory studies, organic matter type differed in mixtures with either bentonite or kaolinite clays. The organic matter types used were guar gum, a net positive biopolymer, and xanthan gum, a net negative biopolymer derived from bacterial exudates, similar to those commonly found in estuaries. These biopolymers were dissolved into low salinity water (0-10 ppt). The biopolymer mixture was degassed and during the degassing process, either bentonite or kaolinite clay was added to the vessel. Surprisingly, different settling rates occurred in the clay-biopolymer mixtures. The settling rates of the clay-guar mixtures was more rapid (1-2 days) than the settling rate for the clay-xanthan mixtures. While clay-guar consolidated further, clay-xanthan maintained consistency for more than 2 weeks with density slowly increasing during that period. Compressional soundspeed (Vp) measurements were made with depth through the vessel using 0.5 mHz piezoelectric transducers. It was found that Vp in water was similar to that of the clay-xanthan. Vp was the same in the upper 6 cm of mud as it was in the overlying water and Vp decreased to become slower with increasing depth. Compressional wave velocity (Vp) also changed slightly with the guar complexes below the sediment water interface to the depth of the vessel. Vp was slightly slower in the mud than in the water column. Vp of the water was 1480-1495 m/s whereas Vp within the clay-biopolymer was below the minimum Vp in the water column. This slight decrease in Vp with depth is consistent for that of naturally occurring surficial mud deposits. This work suggests that organic matter type can play a critical role in the rate of consolidation within a mud deposit, which has implications for mud strength development and transport potential.

Sex Differences in Mathematics Attainment at GCE Ordinary Level

ERIC Educational Resources Information Center

Wood, Robert

1976-01-01

In a comparison of mathematical abilities of boys and girls, after allowing for school effects, boys are seen to excel on problems involving scale or measurement, probability, and space-time relationships. Possible explanations for the observed differences are made. (Author/AV)

Validating the Equilibrium Stage Model for an Azeotropic System in a Laboratorial Distillation Column

ERIC Educational Resources Information Center

Duarte, B. P. M.; Coelho Pinheiro, M. N.; Silva, D. C. M.; Moura, M. J.

2006-01-01

The experiment described is an excellent opportunity to apply theoretical concepts of distillation, thermodynamics of mixtures and process simulation at laboratory scale, and simultaneously enhance the ability of students to operate, control and monitor complex units.

Functional Magnetic Resonance Imaging

ERIC Educational Resources Information Center

Voos, Avery; Pelphrey, Kevin

2013-01-01

Functional magnetic resonance imaging (fMRI), with its excellent spatial resolution and ability to visualize networks of neuroanatomical structures involved in complex information processing, has become the dominant technique for the study of brain function and its development. The accessibility of in-vivo pediatric brain-imaging techniques…

What is 'settled Science'?

NASA Astrophysics Data System (ADS)

Brown, M.

2013-12-01

Republican strategist Frank Luntz famously advised party leaders to emphasize the lack of ';scientific certainty' about global warming because, once the public became convinced of a scientific consensus on global warming, they would accept it and policies responding to it. But philosophical work on scientific methodology puts absolute certainty out of reach. Today almost all philosophers are fallibilists, holding that every belief is subject to correction. Does it follow that an honest report of what science has to say about any topic cannot claim that the matter is settled? I defend a more confident view: much of what science has to say about the world is settled. On this view, settled science doesn't require philosophical certainty. Instead, it is based on stable agreement and practical reliability--values central to C.S. Peirce's account of the scientific method. Defending this position requires care over changes in theory that can undermine the language in which these settled points were initially expressed. It also requires epistemic modesty, since our confidence in any claim, including observational claims, depends on a kind of induction, and could, in principle, be undermined. Interestingly, this line of thought also suggests many of the central claims the historical sciences make about our world are more stable and reliable than the more theory-dependent claims we think of as central to the foundations of physics. David Hume undermined philosophical certainty about causal laws when he argued that, no matter how many times we make observations confirming a law, it could still fail the next test. This point is sometimes confused with healthy scientific skepticism, but Hume's worry has a much broader scope than scientific skepticism. For Hume each instance of a causal relation was doubtful, no matter how similar to previous instances. But scientists are diffident about applying a well-tested law only when the circumstances differ. For instance, particle physicists regard the standard model as extremely reliable for a wide range of energies, though it is expected to fail at higher energies. Peirce's emphasis on stable agreement and practical reliability has two important implications for understanding settled science: first, it exposes our confidence in observations to Hume's worries about induction, since our confidence in observation is, on his account, grounded in regular, reliable agreement between observers. But well-established observational results are paradigmatic examples of settled science! In turn, this points toward a more general account of settled science. The successes of general relativity, quantum mechanics and the standard model in particle physics are inconclusive for the foundations of physics, which aim (ambitiously) at a unified theory of all the forces of nature. But they remain settled successes for these theories. Similarly, biology and geology have achieved stable consensus on many points, including the importance of processes such as natural selection and plate tectonics, and climate science has achieved stable consensus on many conclusions as well (Cook et al., 2013), from the processes responsible for the ';greenhouse' effect and the role of CO2 emissions in amplifying that effect, to a range of estimates for climate sensitivity, based on multiple lines of evidence, that makes the danger of continued emissions plain.

Metal Accretion onto White Dwarfs. I. The Approximate Approach Based on Estimates of Diffusion Timescales

NASA Astrophysics Data System (ADS)

Fontaine, G.; Brassard, P.; Dufour, P.; Tremblay, P.-E.

2015-06-01

The accretion-diffusion picture is the model par excellence for describing the presence of planetary debris polluting the atmospheres of relatively cool white dwarfs. Some important insights into the process may be derived using an approximate approach which combines static stellar models with estimates of diffusion timescales at the base of the outer convection zone or, in its absence, at the photosphere. Until recently, and to our knowledge, values of diffusion timescales in white dwarfs have all been obtained on the basis of the same physics as that developed initially by Paquette et al., including their diffusion coefficients and thermal diffusion coefficients. In view of the recent exciting discoveries of a plethora of metals (including some never seen before) polluting the atmospheres of an increasing number of cool white dwarfs, we felt that a new look at the estimates of settling timescales would be worthwhile. We thus provide improved estimates of diffusion timescales for all 27 elements from Li to Cu in the periodic table in a wide range of the surface gravity-effective temperature domain and for both DA and non-DA stars.

75 FR 15757 - Self-Regulatory Organizations; NASDAQ OMX PHLX, Inc.; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... Rule Change Relating to U.S. Dollar-Settled Foreign Currency Options March 23, 2010. Pursuant to... Krone (``XDV'') to the U.S. Dollar-Settled Foreign Currency Options fees.\\3\\ While changes to the Fee... World Currency Options[supreg] (``WCOs''). The text of the proposed rule change is available on the...

15. The 183Filter Plant with settling basins in January 1945. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

15. The 183-Filter Plant with settling basins in January 1945. The 182-B Reservoir and Pump House is on the left in the background, and the coal storage pond for the 184-B Power House is in the upper right. View is to the northwest. P-8012 - B Reactor, Richland, Benton County, WA

The Impact of Immigration on Southern Manitoba Schools: A Case Study of a Rural School Division

ERIC Educational Resources Information Center

Schellenberg, Val

2011-01-01

Newcomers have traditionally settled in larger cities where their respective cultural groups have established small communities of support and where jobs are more varied and plentiful. Yet, in recent years, Manitoba has experienced a growing phenomenon: Newcomers are increasingly choosing to settle outside of the capital city of Winnipeg; moving…

33 CFR 211.17 - Authority of Division Engineers, Corps of Engineers to settle claims.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Authority of Division Engineers, Corps of Engineers to settle claims. 211.17 Section 211.17 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN...

33 CFR 211.17 - Authority of Division Engineers, Corps of Engineers to settle claims.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Authority of Division Engineers, Corps of Engineers to settle claims. 211.17 Section 211.17 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN...

33 CFR 211.17 - Authority of Division Engineers, Corps of Engineers to settle claims.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Authority of Division Engineers, Corps of Engineers to settle claims. 211.17 Section 211.17 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN...

33 CFR 211.17 - Authority of Division Engineers, Corps of Engineers to settle claims.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Authority of Division Engineers, Corps of Engineers to settle claims. 211.17 Section 211.17 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE ARMY, DEPARTMENT OF DEFENSE REAL ESTATE ACTIVITIES OF THE CORPS OF ENGINEERS IN...

Dissonance between Parent-Selected Bedtimes and Young Children's Circadian Physiology Influences Nighttime Settling Difficulties

ERIC Educational Resources Information Center

LeBourgeois, Monique K.; Wright, Kenneth P., Jr.; LeBourgeois, Hannah B.; Jenni, Oskar G.

2013-01-01

Nighttime settling difficulties (i.e., bedtime resistance, sleep-onset delay) occur in about 25% of young children and are associated with attentional, behavioral, and emotional problems. We examined whether the timing of internal (endogenous) circadian melatonin phase (i.e., dim light melatonin onset; DLMO) and its relationship with…

76 FR 586 - Notice of Lodging of Consent Decree Under the Comprehensive Environmental Response, Compensation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

... incurred and will incur in the future at the Cam-Or Site. The proposed Decree requires the Settling Work... Limited, Ingersoll-Rand Company, Northern Indiana Public Service Company, Rockwell Automation, Tennessee... the Site. Additionally, under the Consent Decree the Settling Work Parties have agreed to pre-pay $2.2...

Performance intensification of Prague wastewater treatment plant.

PubMed

Novák, L; Havrlíková, D

2004-01-01

Prague wastewater treatment plant was intensified during 1994--1997 by construction of new regeneration tank and four new secondary settling tanks. Nevertheless, more stringent effluent limits and operational problems gave rise to necessity for further intensification and optimisation of plant performance. This paper describes principal operational problems of the plant and shows solutions and achieved results that have lead to plant performance stabilisation. The following items are discussed: low nitrification capacity, nitrification bioaugmentation, activated sludge bulking, insufficient sludge disposal capacity, chemical precipitation of raw wastewater, simultaneous precipitation, sludge chlorination, installation of denitrification zones, sludge rising in secondary settling tanks due to denitrification, dosage of cationic polymeric organic flocculant to secondary settling tanks, thermophilic operation of digestors, surplus activated sludge pre-thickening, mathematical modelling.

Theory of quasi-spherical accretion in X-ray pulsars

NASA Astrophysics Data System (ADS)

Shakura, N.; Postnov, K.; Kochetkova, A.; Hjalmarsdotter, L.

2012-02-01

A theoretical model for quasi-spherical subsonic accretion on to slowly rotating magnetized neutron stars is constructed. In this model, the accreting matter subsonically settles down on to the rotating magnetosphere forming an extended quasi-static shell. This shell mediates the angular momentum removal from the rotating neutron star magnetosphere during spin-down episodes by large-scale convective motions. The accretion rate through the shell is determined by the ability of the plasma to enter the magnetosphere. The settling regime of accretion can be realized for moderate accretion rates ? g s-1. At higher accretion rates, a free-fall gap above the neutron star magnetosphere appears due to rapid Compton cooling, and accretion becomes highly non-stationary. From observations of the spin-up/spin-down rates (the angular rotation frequency derivative ?, and ? near the torque reversal) of X-ray pulsars with known orbital periods, it is possible to determine the main dimensionless parameters of the model, as well as to estimate the magnetic field of the neutron star. We illustrate the model by determining these parameters for three wind-fed X-ray pulsars GX 301-2, Vela X-1 and GX 1+4. The model explains both the spin-up/spin-down of the pulsar frequency on large time-scales and the irregular short-term frequency fluctuations, which can correlate or anticorrelate with the X-ray flux fluctuations in different systems. It is shown that in real pulsars an almost iso-angular-momentum rotation law with ω˜ 1/R2, due to strongly anisotropic radial turbulent motions sustained by large-scale convection, is preferred.

Skeletal mineralogy of coral recruits under high temperature and pCO2

NASA Astrophysics Data System (ADS)

Foster, T.; Clode, P. L.

2015-08-01

Aragonite, which is the polymorph of CaCO3 precipitated by modern corals during skeletal formation, has a higher solubility than the more stable polymorph calcite. This higher solubility leaves animals that produce aragonitic skeletons more vulnerable to anthropogenic ocean acidification. It is therefore, important to determine whether scleractinian corals have the plasticity to adapt and produce calcite in their skeletons in response to changing environmental conditions. Both high pCO2 and lower Mg / Ca ratios in seawater are thought to have driven changes in the skeletal mineralogy of major marine calcifiers in the past ∼540 myr. Experimentally reduced Mg / Ca ratios in ambient seawater have been shown to induce some calcite precipitation in both adult and newly settled modern corals, however, the impact of high pCO2 on the mineralogy of recruits is unknown. Here we determined the skeletal mineralogy of one-month old Acropora spicifera coral recruits grown under high temperature (+3 °C) and pCO2 (∼900 μatm) conditions, using X-ray diffraction and Raman spectroscopy. We found that newly settled coral recruits produced entirely aragonitic skeletons regardless of the treatment. Our results show that elevated pCO2 alone is unlikely to drive changes in the skeletal mineralogy of young corals. Not having an ability to switch from aragonite to calcite precipitation may leave corals and ultimately coral reef ecosystems more susceptible to predicted ocean acidification. An important area for prospective research would be to investigate the combined impact of high pCO2 and reduced Mg / Ca ratio on coral skeletal mineralogy.

Development of Fuzzy Logic Controller for Quanser Bench-Top Helicopter

NASA Astrophysics Data System (ADS)

Jafri, M. H.; Mansor, H.; Gunawan, T. S.

2017-11-01

Bench-top helicopter is a laboratory scale helicopter that usually used as a testing bench of the real helicopter behavior. This helicopter is a 3 Degree of Freedom (DOF) helicopter which works by three different axes wshich are elevation, pitch and travel. Thus, fuzzy logic controller has been proposed to be implemented into Quanser bench-top helicopter because of its ability to work with non-linear system. The objective for this project is to design and apply fuzzy logic controller for Quanser bench-top helicopter. Other than that, fuzzy logic controller performance system has been simulated to analyze and verify its behavior over existing PID controller by using Matlab & Simulink software. In this research, fuzzy logic controller has been designed to control the elevation angle. After simulation has been performed, it can be seen that simulation result shows that fuzzy logic elevation control is working for 4°, 5° and 6°. These three angles produce zero steady state error and has a fast response. Other than that, performance comparisons have been performed between fuzzy logic controller and PID controller. Fuzzy logic elevation control has a better performance compared to PID controller where lower percentage overshoot and faster settling time have been achieved in 4°, 5° and 6° step response test. Both controller are have zero steady state error but fuzzy logic controller is managed to produce a better performance in term of settling time and percentage overshoot which make the proposed controller is reliable compared to the existing PID controller.

Skeletal mineralogy of coral recruits under high temperature and pCO2

NASA Astrophysics Data System (ADS)

Foster, T.; Clode, P. L.

2016-03-01

Aragonite, which is the polymorph of CaCO3 precipitated by modern corals during skeletal formation, has a higher solubility than the more stable polymorph calcite. This higher solubility may leave animals that produce aragonitic skeletons more vulnerable to anthropogenic ocean acidification. It is therefore important to determine whether scleractinian corals have the plasticity to adapt and produce calcite in their skeletons in response to changing environmental conditions. Both high pCO2 and lower Mg / Ca ratios in seawater are thought to have driven changes in the skeletal mineralogy of major marine calcifiers in the past ˜ 540 Ma. Experimentally reduced Mg / Ca ratios in ambient seawater have been shown to induce some calcite precipitation in both adult and newly settled modern corals; however, the impact of high pCO2 on the mineralogy of recruits is unknown. Here we determined the skeletal mineralogy of 1-month-old Acropora spicifera coral recruits grown under high temperature (+3 °C) and pCO2 (˜ 900 µatm) conditions, using X-ray diffraction and Raman spectroscopy. We found that newly settled coral recruits produced entirely aragonitic skeletons regardless of the treatment. Our results show that elevated pCO2 alone is unlikely to drive changes in the skeletal mineralogy of young corals. Not having an ability to switch from aragonite to calcite precipitation may leave corals and ultimately coral reef ecosystems more susceptible to predicted ocean acidification. An important area for prospective research would be the investigation of the combined impact of high pCO2 and reduced Mg / Ca ratio on coral skeletal mineralogy.

Male-male competition and parental care in collared flycatchers (Ficedula albicollis): an experiment controlling for differences in territory quality.

PubMed

Qvarnström, A; Grifffith, S C; Gustafsson, L

2000-12-22

Females are known to benefit from mate choice in several different ways but the relationship between these benefits has received little attention. The quality of resources provided by males, such as nest sites, and paternal care are often assumed to covary positively However, because the location of the nest affects the cost of parental care, these two benefits from mate choice can easily be confounded. To investigate the provisioning ability of successful competitors while controlling for differences in territory quality we removed early-settled pairs of collared flycatchers (Ficedula albicollis) and allowed replacement by later-arriving males or floaters (i.e.'poor competitors'). A control group of early-settled males (i.e. 'good competitors') had their females removed. Females paired to good competitors enjoyed a significantly higher reproductive success and tended to receive more parental assistance from their mates compared with females mated to poor competitors. Thus, some males seem able not only to compete successfully over resources but also to feed their offspring at a relatively higher rate. An alternative explanation, that poor competitors invested less in offspring quality in response to a lower share of paternity, could be rejected. The rate of extra-pair paternity did not differ between the two treatment groups. Our results suggest that male- male competition can sometimes facilitate female choice of superior care-givers. Thus, a female's benefit from choosing a competitive male may not be restricted to the quality of the resource he defends but can also include superior paternal care.

Rice Bran Oil: A Versatile Source for Edible and Industrial Applications.

PubMed

Pal, Yogita P; Pratap, Amit P

2017-01-01

Rice bran oil (RBO) is healthy gift generously given by nature to mankind. RBO is obtained from rice husk, a byproduct of rice milling industry and is gaining lot of importance as cooking oil due to presence of important micronutrient, gamma oryzanol. Its high smoke point is beneficial for its use for frying and deep frying of food stuff. It is popular because of balanced fatty acid profile (most ideal ratio of saturated, monounsaturated and polyunsaturated fatty acids), antioxidant capacity, and cholesterollowering abilities. Rice bran wax which is secondary by-product obtained as tank settling from RBO is used as a substitute for carnauba wax in cosmetics, confectionery, shoe creams etc. It can be also used as a source for fatty acid and fatty alcohol. The article is intended to highlight for the importance of RBO and its applications.

Hydrothermal Geothermal Subprogram, Hawaii Geothermal Research Station, Hawaii County, Hawaii: Environmental assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

This environmental impact assessment addresses the design, construction, and operation of an electric generating plant (3 to 4 MWe) and research station (Hawaii Geothermal Research Station (HGRS)) in the Puna district on the Island of Hawaii. The facility will include control and support buildings, parking lots, cooling towers, settling and seepage ponds, the generating plant, and a visitors center. Research activities at the facility will evaluate the ability of a successfully flow-tested well (42-day flow test) to provide steam for power generation over an extended period of time (two years). In future expansion, research activities may include direct heat applicationsmore » such as aquaculture and the effects of geothermal fluids on various plant components and specially designed equipment on test modules. 54 refs., 7 figs., 22 tabs.« less

Teaching Bird Identification & Vocabulary with Twitter

ERIC Educational Resources Information Center

Hallman, Tyler A.; Robinson, W. Douglas

2015-01-01

Species identification is essential to biology, conservation, and management. The ability to focus on specific diagnostic characteristics of a species helps improve the speed and accuracy of identification. Birds are excellent subjects for teaching species identification because, in combination with their different shapes and sizes, their plumages…

Gentrification, Schooling and Social Inequality

ERIC Educational Resources Information Center

DeSena, Judith N.; Ansalone, George

2009-01-01

Tracking or the separation of students by ability and curriculum is pervasive in American schooling despite the fact that contemporary research has associated this educational structure with negative student outcomes. Opponents of tracking contend that it deprives underprivileged children of excellence and equity in education and separates them…

Synthesis and application of ion imprinting polymer coated magnetic multi-walled carbon nanotubes for selective adsorption of nickel ion

NASA Astrophysics Data System (ADS)

He, Junnan; Shang, Hongzhou; Zhang, Xing; Sun, Xiaoran

2018-01-01

A novel nickel ion imprinted polymers (IIPs) based on multi-walled carbon nanotubes (MWCNTs) were synthesized inverse emulsion system, using chitosan(CS) and acrylic acid as the functional monomers, Ni (II) as the template, and N' N-methylene bis-acrylamide as the cross-linker. The chemical structure and morphological feature of the IIPs were characterized by scanning electron microscopy (SEM), Thermogravimetry (TG), X-ray diffraction (XRD), and Fourier transform infrared spectrometer (FTIR). The studies indicated that the gel layer was well grafted on the surface of MWCNTs. Studies on the adsorption ability of the IIPs, by atomic absorption spectrophotometry, demonstrated that IIPs possessed excellent adsorption and selective ability towards Ni (II), fitting to pseudo second-order kinetic isotherms and with a maximum capacity of 19.86 mg/g, and selectivity factor of 13.09 and 4.42. The electrochemical performance of ion imprinting carbon paste electrode (CPE/IIPs) was characterized by Cyclic voltammetry (CV). Studies have shown that CPE/IIPs showed excellent electrochemical performance.

Antimicrobial and Antifouling Polymeric Agents for Surface Functionalization of Medical Implants.

PubMed

Zeng, Qiang; Zhu, Yiwen; Yu, Bingran; Sun, Yujie; Ding, Xiaokang; Xu, Chen; Wu, Yu-Wei; Tang, Zhihui; Xu, Fu-Jian

2018-05-09

Combating implant-associated infections is an urgent demand due to the increasing numbers in surgical operations such as joint replacements and dental implantations. Surface functionalization of implantable medical devices with polymeric antimicrobial and antifouling agents is an efficient strategy to prevent bacterial fouling and associated infections. In this work, antimicrobial and antifouling branched polymeric agents (GPEG and GEG) were synthesized via ring-opening reaction involving gentamicin and ethylene glycol species. Due to their rich primary amine groups, they can be readily coated on the polydopamine-modified implant (such as titanium) surfaces. The resultant surface coatings of Ti-GPEG and Ti-GEG produce excellent in vitro antibacterial efficacy toward both Staphylococcus aureus and Escherichia coli, while Ti-GPEG exhibit better antifouling ability. Moreover, the infection model with S. aureus shows that implanted Ti-GPEG possessed excellent antibacterial and antifouling ability in vivo. This study would provide a promising strategy for the surface functionalization of implantable medical devices to prevent implant-associated infections.

Intensity of musculoskeletal pain and (in) ability to work in nursing.

PubMed

Magnago, Tânia Solange Bosi de Souza; de Lima, Ana Cláudia Soares; Prochnow, Andrea; Ceron, Marinez Diniz da Silva; Tavares, Juliana Petri; Urbanetto, Janete de Souza

2012-01-01

the aim was to evaluate the association between the intensity of musculoskeletal pain and reduction in work ability among nursing workers. a cross-sectional study, involving 592 nursing staff in a public university hospital in Rio Grande do Sul, Brazil. The Brazilian version of the Finnish questionnaire for calculating Work Ability Index was used, whose score varies from 7 to 49 points. The score was dichotomized as reduced work ability (7 to 36 points) and good/excellent ability (37 to 49 points). The intensity of musculoskeletal pain over the previous week was evaluated, using a numerical pain scale. 43.3% of the participants had reduced work ability and 48.8% reported strong to unbearable pain. Even after adjusting for potentially confounding factors (function and length of service in the function), the workers who mentioned strong to unbearable pain were four times more likely to be classified in the group with reduced work ability. A positive association was determined between intensity of musculoskeletal pain and reduction in work ability. It is necessary to adopt intervention measures in the organizational structure, so as to promote/restore work ability.

Specific aerobic granules can be developed in a completely mixed tank reactor by bioaugmentation using micro-mycelial pellets of Phanerochaete chrysosporium.

PubMed

Hailei, Wang; Ping, Li; Qianlong, Jin; Ge, Qin

2014-03-01

Aerobic granules were firstly developed in a completely mixed tank reactor (CMTR) by seeding micro-mycelial pellets (MMPs) of Phanerochaete chrysosporium. During phenol wastewater treatment, sludge granulation rate reached 67 % after 15-day operation. The granules in CMTR are different from aerobic granules described in literature in morphology, and a majority of them are rod-shaped or rodlike sludge besides spherical granules. The polymorphic granules, having no essential difference with aerobic granules previously reported, achieve advantages over conventional activated sludge in settling ability, biomass concentration, density, integrity coefficient and removal ability to phenol wastewater. The optimized parameters for sludge granulation in CMTR including temperature, inoculum quantity, rotary speed and superficial air upflow velocity are 30 °C, 5–7 g/l, 150 rpm, and 0.5 cm/s, respectively. Analysis on sludge granulation mechanism indicates that MMPs not only result in the formation of aerobic granules containing MMPs as nuclei, but also induce the formation of biogranules which do not have MMP at their cores. The work challenges the general belief that the homogenous circular flow pattern of microbial aggregates is necessary for aerobic sludge granulation.

Intoxication and settled insanity: a finding of not guilty by reason of insanity.

PubMed

Feix, Jeff; Wolber, Greg

2007-01-01

This article presents a case of first-degree murder for which the defendant was acquitted as not guilty by reason of insanity, based on a defense involving the concept of "settled insanity." The literature on settled insanity is reviewed and discussed in the context of voluntary and involuntary intoxication. Statute and case law from those jurisdictions in which settled insanity is specifically allowed as an acceptable threshold condition for the insanity defense define the concept as a permanent condition resulting from substance abuse, rather than the effects of intoxication, no matter how severe. Also discussed are potential criteria for this defense, including evidence that psychotic symptoms thought to be responsible for the crime were, in some manner, separate and apart from symptoms caused solely by voluntary acute intoxication. Other factors that may assist evaluators in differentiating settled insanity from the effects of acute intoxication are presented. It is recommended that evaluators attempt to determine the timing of the onset of psychotic symptoms in relation to substance abuse, the persistence of such symptoms beyond detoxification, and whether ongoing psychiatric treatment is necessary to ameliorate the symptoms beyond intoxication. In the case described, psychotic symptoms persisted long after acute intoxication and beyond the time when drugs or alcohol were detected in the accused's body, requiring clinical intervention for psychosis. Also, before the crime, the defendant had exhibited significant psychological difficulty. The evaluating clinician must still determine, even when a threshold condition is considered to be present, whether statutory criteria for the insanity defense (for the jurisdiction in which the crime allegedly took place) are met.

Impact of nZVI stability on mobility in porous media.

PubMed

Kocur, Chris M; O'Carroll, Denis M; Sleep, Brent E

2013-02-01

Nano-scale zero valent iron (nZVI) has received significant attention because of its potential to rapidly reduce a number of priority source zone contaminants. In order to effectively deliver nZVI to the source zone the nZVI particles must be stable. Previous laboratory studies have demonstrated the mobility of polymer modified suspensions of low concentration nZVI. More recently studies have shown potential for higher concentration nZVI suspensions to be transmitted through porous media. However, with increasing nZVI concentration aggregation is accelerated, reducing the available time for injection before nZVI settles. In this study the colloidal stability and mobility of nZVI concurrently synthesized and stabilized in the presence of carboxy-methyl-cellulose (CMC) are evaluated in one-dimensional column experiments. Low pore water velocity nZVI injections (4, 2, and 0.25 m/day) conducted over periods as long as 80 h with no mixing of the influent reservoir were used to investigate the effects of prolonged aggregation and settling of colloids on transport. A numerical simulator, based on colloid filtration theory, but accounting for particle aggregation and settling was used to evaluate the contributions of aggregation and settling on nZVI mobility. Results suggest that the prediction of nZVI sticking efficiency in column experiments becomes increasingly influenced by aggregation and settling in the influent reservoir as the period of injection increases. Consideration of nZVI stability is required for the prediction of nZVI mobility at the field scale and for the design of successful nZVI remediation plans. Copyright © 2012 Elsevier B.V. All rights reserved.

Elevated hair cortisol concentrations in recently fled asylum seekers in comparison to permanently settled immigrants and non-immigrants.

PubMed

Mewes, R; Reich, H; Skoluda, N; Seele, F; Nater, U M

2017-03-07

Recently fled asylum seekers generally live in stressful conditions. Their residency status is mostly insecure and, similar to other immigrants, they experience stress due to acculturation. Moreover, they often suffer from traumatization and posttraumatic stress disorder (PTSD). All of these factors can result in chronic maladaptive biological stress responses in terms of hyper- or hypocortisolism and, ultimately, illness. We believe the current study is the first to compare hair cortisol concentration (HCC) of recently fled asylum seekers with PTSD to those without PTSD, and to compare HCC of asylum seekers to HCC of permanently settled immigrants and non-immigrant individuals. HCC of the previous 2 months was compared between 24 asylum seekers without PTSD, 32 asylum seekers with PTSD, 24 permanently settled healthy Turkish immigrants and 28 non-immigrant healthy Germans as the reference group. Statistical comparisons were controlled for age, sex and body mass index. No significant difference in HCC was found between asylum seekers with and without PTSD. However, the asylum seekers showed a 42% higher HCC than the reference group. In contrast, the permanently settled immigrants exhibited a 23% lower HCC than the reference group. We found relative hypercortisolism in recently fled asylum seekers, but no difference between persons with and without PTSD. These findings add to the very few studies investigating HCC in groups with recent traumatization and unsafe living conditions. Contrary to the findings in asylum seekers, permanently settled immigrants showed relative hypocortisolism. Both hyper- and hypocortisolism may set the stage for the development of stress-related illnesses.

Sewage sludge treatment system

NASA Technical Reports Server (NTRS)

Kalvinskas, John J. (Inventor); Mueller, William A. (Inventor)

1976-01-01

Raw sewage may be presently treated by mixing screened raw sewage with activated carbon. The mixture is then allowed to stand in a first tank for a period required to settle the suspended matter to the bottom of the tank as a sludge. Thereafter, the remaining liquid is again mixed with activated carbon and the mixture is transferred to a secondary settling tank, where it is permitted to stand for a period required for the remaining floating material to settle as sludge and for adsorption of sewage carbon as well as other impurities to take place. The sludge from the bottom of both tanks is removed and pyrolyzed to form activated carbon and ash, which is mixed with the incoming raw sewage and also mixed with the liquid being transferred from the primary to the secondary settling tank. It has been found that the output obtained by the pyrolysis process contains an excess amount of ash. Removal of this excess amount of ash usually also results in removing an excess amount of carbon thereby requiring adding carbon to maintain the treatment process. By separately pyrolyzing the respective sludges from the first and second settling tanks, and returning the separately obtained pyrolyzed material to the respective first and second tanks from which they came, it has been found that the adverse effects of the excessive ash buildup is minimized, the carbon yield is increased, and the sludge from the secondary tank can be pyrolyzed into activated carbon to be used as indicated many more times than was done before exhaustion occurs.

Partitioning of phthalates among the gas phase, airborne particles and settled dust in indoor environments

NASA Astrophysics Data System (ADS)

Weschler, Charles J.; Salthammer, Tunga; Fromme, Hermann

A critical evaluation of human exposure to phthalate esters in indoor environments requires the determination of their distribution among the gas phase, airborne particles and settled dust. If sorption from the gas phase is the dominant mechanism whereby a given phthalate is associated with both airborne particles and settled dust, there should be a predictable relationship between its particle and dust concentrations. The present paper tests this for six phthalate esters (DMP, DEP, DnBP, DiBP, BBzP and DEHP) that have been measured in both the air and the settled dust of 30 Berlin apartments. The particle concentration, CParticle, of a given phthalate was calculated from its total airborne concentration and the concentration of airborne particles (PM 4). This required knowledge of the particle-gas partition coefficient, Kp, which was estimated from either the saturation vapor pressure ( ps) or the octanol/air partition coefficient ( KOA). For each phthalate in each apartment, the ratio of its particle concentration to its dust concentration ( CParticle/ CDust) was calculated. The median values of this ratio were within an order of magnitude of one another for five of the phthalate esters despite the fact that their vapor pressures span four orders of magnitude. This indicates that measurements of phthalate ester concentrations in settled dust can provide an estimate of their concentration in airborne particles. When the latter information is coupled with measurements of airborne particle concentrations, the gas-phase concentrations of phthalates can also be estimated and, subsequently, the contribution of each of these compartments to indoor phthalate exposures.

Flow Scales of Influence on the Settling Velocities of Particles with Varying Characteristics

PubMed Central

Jacobs, Corrine N.; Merchant, Wilmot; Jendrassak, Marek; Limpasuvan, Varavut; Gurka, Roi; Hackett, Erin E.

2016-01-01

The settling velocities of natural, synthetic, and industrial particles were measured in a grid turbulence facility using optical measurement techniques. Particle image velocimetry and 2D particle tracking were used to measure the instantaneous velocities of the flow and the particles’ trajectories simultaneously. We find that for particles examined in this study (Rep = 0.4–123), settling velocity is either enhanced or unchanged relative to stagnant flow for the range of investigated turbulence conditions. The smallest particles’ normalized settling velocities exhibited the most consistent trends when plotted versus the Kolmogorov-based Stokes numbers suggesting that the dissipative scales influence their dynamics. In contrast, the mid-sized particles were better characterized with a Stokes number based on the integral time scale. The largest particles were largely unaffected by the flow conditions. Using proper orthogonal decomposition (POD), the flow pattern scales are compared to particle trajectory curvature to complement results obtained through dimensional analysis using Stokes numbers. The smallest particles are found to have trajectories with curvatures of similar scale as the small flow scales (higher POD modes) whilst mid-sized particle trajectories had curvatures that were similar to the larger flow patterns (lower POD modes). The curvature trajectories of the largest particles did not correspond to any particular flow pattern scale suggesting that their trajectories were more random. These results provide experimental evidence of the “fast tracking” theory of settling velocity enhancement in turbulence and demonstrate that particles align themselves with flow scales in proportion to their size. PMID:27513958

Goal-directed transthoracic echocardiography during advanced cardiac life support: A pilot study using simulation to assess ability

PubMed Central

Greenstein, Yonatan Y.; Martin, Thomas J.; Rolnitzky, Linda; Felner, Kevin; Kaufman, Brian

2015-01-01

Introduction Goal-directed echocardiography (GDE) is used to answer specific clinical questions which provide invaluable information to physicians managing a hemodynamically unstable patient. We studied perception and ability of housestaff previously trained in GDE to accurately diagnose common causes of cardiac arrest during simulated advanced cardiac life support (ACLS); we compared their results to those of expert echocardiographers. Methods Eleven pulmonary and critical care medicine fellows, seven emergency medicine residents, and five cardiologists board-certified in echocardiography were enrolled. Baseline ability to acquire four transthoracic echocardiography views was assessed and participants were exposed to six simulated cardiac arrests and were asked to perform a GDE during ACLS. Housestaff performance was compared to the performance of five expert echocardiographers. Results Average baseline and scenario views by housestaff were of good or excellent quality 89% and 83% of the time, respectively. Expert average baseline and scenario views were always of good or excellent quality. Housestaff and experts made the correct diagnosis in 68% and 77% of cases, respectively. On average, participants required 1.5 pulse checks to make the correct diagnosis. 94% of housestaff perceived this study as an accurate assessment of ability. Conclusions In an ACLS compliant manner, housestaff are capable of diagnosing management altering pathologies the majority of the time and they reach similar diagnostic conclusions in the same amount of time as expert echocardiographers in a simulated cardiac arrest scenario. PMID:25932707

Goal-Directed Transthoracic Echocardiography During Advanced Cardiac Life Support: A Pilot Study Using Simulation to Assess Ability.

PubMed

Greenstein, Yonatan Y; Martin, Thomas J; Rolnitzky, Linda; Felner, Kevin; Kaufman, Brian

2015-08-01

Goal-directed echocardiography (GDE) is used to answer specific clinical questions that provide invaluable information to physicians managing a hemodynamically unstable patient. We studied perception and ability of house staff previously trained in GDE to accurately diagnose common causes of cardiac arrest during simulated advanced cardiac life support (ACLS); we compared their results with those of expert echocardiographers. Eleven pulmonary and critical care medicine fellows, 7 emergency medicine residents, and 5 cardiologists board certified in echocardiography were enrolled. Baseline ability to acquire 4 transthoracic echocardiography views was assessed, and participants were exposed to 6 simulated cardiac arrests and were asked to perform a GDE during ACLS. House staff performance was compared with the performance of 5 expert echocardiographers. Average baseline and scenario views by house staff were of good or excellent quality 89% and 83% of the time, respectively. Expert average baseline and scenario views were always of good or excellent quality. House staff and experts made the correct diagnosis in 68% and 77% of cases, respectively. On average, participants required 1.5 pulse checks to make the correct diagnosis. Of house staff, 94% perceived this study as an accurate assessment of ability. In an ACLS-compliant manner, house staff are capable of diagnosing management-altering pathologies the majority of the time, and they reach similar diagnostic conclusions in the same amount of time as expert echocardiographers in a simulated cardiac arrest scenario.

VIEW LOOKING NORTH ALONG THE EAST SIDE OF SETTLING RESERVOIR ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

VIEW LOOKING NORTH ALONG THE EAST SIDE OF SETTLING RESERVOIR NO. 3. THE BLAISDELL SLOW SAND FILTER WASHING MACHINE IS SEEN AT THE NORTHEAST CORNER OF THE RESERVOIR. THE CONCRETE COLUMNS (LEFT) AND THE CEMENT-ASBESTOS TROUGH (RIGHT) WERE ADDED CIRCA 1944. - Yuma Main Street Water Treatment Plant, Jones Street at foot of Main Street, Yuma, Yuma County, AZ

Microbiologically Influenced Corrosion: Causative Organisms and Mechanisms

DTIC Science & Technology

2012-01-31

corrosion is both predictable and complex. In aquatic environments and under some atmospheric conditions . microorganisms settle on surfaces and alter the...some atmospheric conditions , microorganisms settle on sin laces and alter the surface chemistry controlling the rates of corrosion or shifting the...pitting corrosion of some allO) S continues under deposits of iron-oxidizing bacteria independent of bacterial activity. Similarly, microbiologicall

Recognizing the ‘sparsely settled forest’: Multi-decade socioecological change dynamics and community exemplars

Treesearch

Derek B. Van Berkel; Bronwyn Rayfield; Sebastián Martinuzzi; Martin J. Lechowicz; Eric White; Kathleen P. Bell; Chris R. Colocousis; Kent F. Kovacs; Anita T. Morzillo; Darla K. Munroe; Benoit Parmentier; Volker C. Radeloff; Brian J. McGill

2018-01-01

Sparsely settled forests (SSF) are poorly studied, coupled natural and human systems involving rural communities in forest ecosystems that are neither largely uninhabited wildland nor forests on the edges of urban areas. We developed and applied a multidisciplinary approach to define, map, and examine changes in the spatial extent and structure of both the landscapes...

Lockheed XFV-1 model in the 40x80 foot wind tunnel at NASA Ames Research Center

NASA Image and Video Library

1952-05-16

Wide shot of 40x 80 wind tunnel settling chamber with Lockheed XFV-1 model. Project engineer Mark Kelly (not shown). Remote controlled model flown in the settling chamber of the 40x80 wind tunnel. Electric motors in the model, controlled the counter-rotating propellers to test vertical takeoff. Test no. 71

76 FR 61183 - Loveland Area Projects-Western Area Colorado Missouri Balancing Authority-Rate Order No. WAPA-155

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-03

... metered load settled using WACM hourly pricing with no using WACM hourly pricing with no penalty. penalty... metered load settled using pricing in no-penalty band. Customer WACM hourly pricing with a 25% penalty... or equal to 0.5 percent of its hourly average load, no Regulation Service charges will be assessed by...

Chapter 2: Beginning of water studies in the Central Arizona Highlands

Treesearch

Gerald J. Gottfried; Leonard F. DeBano; Malchus B. Baker

1999-01-01

Water has been recognized as an important resource in central Arizona and has affected populations occupying the Salt River Valley for centuries. Water related activities have been documented since about 200 before the common era, when Hohokam Indians settled the Valley and constructed canals to irrigate their fields. Europeans began to settle in the Phoenix area in...

Amid Immigration Debate, Settled Ground: High Court's School Access Ruling Endures as a Quiet Fact of Life

ERIC Educational Resources Information Center

Zehr, Mary Ann

2007-01-01

Illegal immigration is a divisive issue in the politically conservative East Texas community of Tyler, known by many locally as "The Rose Capital of America." Drawn by jobs in the rose fields and iron foundries, Mexican immigrants began settling here with their families in the 1970s. Hispanic children--citizens, legal residents, and…

Measuring water and sediment discharge from a road plot with a settling basin and tipping bucket

Treesearch

Thomas A. Black; Charles H. Luce

2013-01-01

A simple empirical method quantifies water and sediment production from a forest road surface, and is well suited for calibration and validation of road sediment models. To apply this quantitative method, the hydrologic technician installs bordered plots on existing typical road segments and measures coarse sediment production in a settling tank. When a tipping bucket...

78 FR 48214 - Self-Regulatory Organizations; The Options Clearing Corporation; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-07

... and Rules to Certain U.S. Dollar-Settled Gold Futures Designed to Replicate Positions in the Spot... Futures That Were Based on the Value of Gold in the Spot Market With an Additional Daily Cost of Carry... Rules to certain U.S. dollar-settled gold futures designed to replicate positions in the spot market...

"Libel Tourism" Puts British and American Defamation Standards in the Spotlight

ERIC Educational Resources Information Center

Howard, Jennifer

2008-01-01

This article reports on the College Art Association's decision to settle with a scholar who felt defamed by an article in one of its scholarly journals which shines a spotlight on so-called "libel tourism." When the College Art Association decided recently to settle rather than fight a possible libel action in Britain over a book review…

[Optimization of lime milk precipitation process of Lonicera Japonica aqueous extract based on quality by design concept].

PubMed

Shen, Jin-Jing; Gong, Xing-Chu; Pan, Jian-Yang; Qu, Hai-Bin

2017-03-01

Design space approach was applied in this study to optimize the lime milk precipitation process of Lonicera Japonica (Jinyinhua) aqueous extract. The evaluation indices for this process were total organic acid purity and amounts of 6 organic acids obtained from per unit mass of medicinal materials. Four critical process parameters (CPPs) including drop speed of lime milk, pH value after adding lime milk, settling time and settling temperature were identified by using the weighted standardized partial regression coefficient method. Quantitative models between process evaluation indices and CPPs were established by a stepwise regression analysis. A design space was calculated by a Monte-Carlo simulation method, and then verified. The verification test results showed that the operation within the design space can guarantee the stability of the lime milk precipitation process. The recommended normal operation space is as follows： drop speed of lime milk of 1.00-1.25 mL•min⁻¹, pH value of 11.5-11.7, settling time of 1.0-1.2 h, and settling temperature of 10-20 ℃.. Copyright© by the Chinese Pharmaceutical Association.

Coral settlement onto Halimeda opuntia: a fatal attraction to an ephemeral substrate?

NASA Astrophysics Data System (ADS)

Nugues, Maggy M.; Szmant, Alina M.

2006-11-01

Degraded reefs with a high abundance of macroalgae usually also have low densities of coral recruits. Few studies, however, have examined whether these algae affect coral larval settlement. This study demonstrates, experimentally, that larvae of the Caribbean coral Favia fragrum can settle on the green alga Halimeda opuntia even when another substrate more suitable for settlement is present. Larval settlement onto experimental substrates was quantified under three treatments: rubble only, rubble plus plastic algal mimic, and rubble plus live H. opuntia. Similar total larval settlement was observed in all treatments. No larvae settled on the algal mimic, but total settlement was similar on the rubble in the first two treatments, showing that the rubble alone offered sufficient substrate for high settlement success. About half the larvae in the live algal treatment settled on H. opuntia instead of on the rubble, showing that larvae did not reject this substrate as they did the algal mimic. This result raises the possibility that corals will settle on some macroalgae when their abundance is high. Most macroalgae, including H. opuntia, are ephemeral substrates unsuitable for post-settlement survival. Such unexpected settlement may therefore have significant consequences for coral recruitment success on algal-dominated reefs.

Effects of Chemistry on Vertical Dust Motion in Early Protoplanetary Disks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miyazaki, Yoshinori; Korenaga, Jun

We propose the possibility of a new phenomenon affecting the settling of dust grains at the terrestrial region in early protoplanetary disks. Sinking dust grains evaporate in a hot inner region during the early stage of disk evolution, and the effects of condensation and evaporation on vertical dust settling can be significant. A 1D dust settling model considering both physical and chemical aspects is presented in this paper. Modeling results show that dust grains evaporate as they descend into the hotter interior and form a condensation front, above which dust-composing major elements, Mg, Si, and Fe, accumulate, creating a largemore » temperature gradient. Repeated evaporation at the front inhibits grain growth, and small grain sizes elevate the opacity away from the midplane. Self-consistent calculations, including radiative heat transfer and condensation theory, suggest that the mid-disk temperature could be high enough for silicates to remain evaporated longer than previous estimates. The formation of a condensation front leads to contrasting settling behaviors between highly refractory elements, such as Al and Ca, and moderately refractory elements, such as Mg, Si, and Fe, suggesting that elemental abundance in planetesimals may not be a simple function of volatility.« less

The Control of Environment Management Through Administrative Court

NASA Astrophysics Data System (ADS)

Putrijanti, Aju

2018-02-01

Environment is important in human life. Conflict of interest comes between development of economy sector, citizenship needs and Governance, as it becomes completely difficult to analyze. The environment's lawsuit is increase from the beginning of the Court established. The duty of Administrative Court are to investigate, decide and settle administrative disputes. The Governance has to pay attention before issuing the Government's decree by put principle of good governance as priority. The issue in this paper is strengthening the role of Administrative Court to maintain the environment reuse by settle environment disputes based on the importance of environment. The administrative decisions in environment field may cause a loss or damage for the people. When the public officer did not put the appreciation to the reuse of environment and principle of good governance, it will become problems. The decision should be environmentally friendly. There should be certified judge to settle the dispute. The method of this research by examines the Judge's verdict in environment disputes, and its relation with regulations and the newest issues. The conclusion is increase the role of the Administrative Court to maintain the environment by law enforcement through settle environment disputes.

Effects of Chemistry on Vertical Dust Motion in Early Protoplanetary Disks

NASA Astrophysics Data System (ADS)

Miyazaki, Yoshinori; Korenaga, Jun

2017-11-01

We propose the possibility of a new phenomenon affecting the settling of dust grains at the terrestrial region in early protoplanetary disks. Sinking dust grains evaporate in a hot inner region during the early stage of disk evolution, and the effects of condensation and evaporation on vertical dust settling can be significant. A 1D dust settling model considering both physical and chemical aspects is presented in this paper. Modeling results show that dust grains evaporate as they descend into the hotter interior and form a condensation front, above which dust-composing major elements, Mg, Si, and Fe, accumulate, creating a large temperature gradient. Repeated evaporation at the front inhibits grain growth, and small grain sizes elevate the opacity away from the midplane. Self-consistent calculations, including radiative heat transfer and condensation theory, suggest that the mid-disk temperature could be high enough for silicates to remain evaporated longer than previous estimates. The formation of a condensation front leads to contrasting settling behaviors between highly refractory elements, such as Al and Ca, and moderately refractory elements, such as Mg, Si, and Fe, suggesting that elemental abundance in planetesimals may not be a simple function of volatility.

Hydrologic and Vegetative Removal of Cryptosporidium parvum, Giardia lamblia, and Toxoplasma gondii Surrogate Microspheres in Coastal Wetlands

PubMed Central

Hogan, Jennifer N.; Daniels, Miles E.; Watson, Fred G.; Oates, Stori C.; Miller, Melissa A.; Conrad, Patricia A.; Shapiro, Karen; Hardin, Dane; Dominik, Clare; Melli, Ann; Jessup, David A.

2013-01-01

Constructed wetland systems are used to reduce pollutants and pathogens in wastewater effluent, but comparatively little is known about pathogen transport through natural wetland habitats. Fecal protozoans, including Cryptosporidium parvum, Giardia lamblia, and Toxoplasma gondii, are waterborne pathogens of humans and animals, which are carried by surface waters from land-based sources into coastal waters. This study evaluated key factors of coastal wetlands for the reduction of protozoal parasites in surface waters using settling column and recirculating mesocosm tank experiments. Settling column experiments evaluated the effects of salinity, temperature, and water type (“pure” versus “environmental”) on the vertical settling velocities of C. parvum, G. lamblia, and T. gondii surrogates, with salinity and water type found to significantly affect settling of the parasites. The mesocosm tank experiments evaluated the effects of salinity, flow rate, and vegetation parameters on parasite and surrogate counts, with increased salinity and the presence of vegetation found to be significant factors for removal of parasites in a unidirectional transport wetland system. Overall, this study highlights the importance of water type, salinity, and vegetation parameters for pathogen transport within wetland systems, with implications for wetland management, restoration efforts, and coastal water quality. PMID:23315738

The efficiency of combined coagulant and ballast to remove harmful cyanobacterial blooms in a tropical shallow system.

PubMed

Miranda, Marcela; Noyma, Natália; Pacheco, Felipe S; de Magalhães, Leonardo; Pinto, Ernani; Santos, Suzan; Soares, Maria Fernanda A; Huszar, Vera L; Lürling, Miquel; Marinho, Marcelo M

2017-05-01

We tested the hypothesis that a combination of coagulant and ballast could be efficient for removal of positively buoyant harmful cyanobacteria in shallow tropical waterbodies, and will not promote the release of cyanotoxins. This laboratory study examined the efficacy of coagulants [polyaluminium chloride (PAC) and chitosan (made of shrimp shells)] alone, and combined with ballast (lanthanum modified bentonite, red soil or gravel) to remove the natural populations of cyanobacteria collected from a shallow eutrophic urban reservoir with alternating blooms of Cylindrospermopsis and Microcystis. PAC combined with ballast was effective in settling blooms dominated by Microcystis or Cylindrospermopsis. Contrary to our expectation, chitosan combined with ballast was only effective in settling Cylindrospermopsis-dominated blooms at low pH, whereas at pH≥8 no effective flocculation and settling could be evoked. Chitosan also had a detrimental effect on Cylindrospermopsis causing the release of saxitoxins. In contrast, no detrimental effect on Microcystis was observed and all coagulant-ballast treatments were effective in not only settling the Microcystis dominated bloom, but also lowering dissolved microcystin concentrations. Our data show that the best procedure for biomass reduction also depends on the dominant species. Copyright © 2017 Elsevier B.V. All rights reserved.

Operating safety of a hot-shot wind tunnel with combined test gas heating in stabilization mode

NASA Astrophysics Data System (ADS)

Shumskii, V. V.; Yaroslavtsev, M. I.

2017-07-01

In the present paper, we analyze emergency situations typical of short-duration wind tunnels with electric-arc or combined test-gas heating in the presence of stabilization and diaphragm-rupturing systems, which occur in the case of no discharge initiation in the settling chamber, with the capacitor battery having remained charged during the start of wind-tunnel systems. For avoiding such emergency situations, some additional changes based on using feedback elements are introduced into the wind-tunnel design: the piston of the fast-response valve is made hollow for increasing the volume of the shutoff cavity and for making the release of pressure from this cavity unnecessary; the high-pressure channel, which connects the piston and the piston rod with the settling-chamber cavity, is filled with a liquid and is closed from the side of the settling chamber with a piston; the device for controlled diaphragm breakdown is provided with an external electric circuit intended to control the diaphragm-rupturing process. Those modifications allow subsequent functioning of the wind-tunnel systems only in the presence of heat-supply-induced pressure growth in the settling chamber of the wind tunnel.

The role of settling velocity formulation in the determination of gully pot trapping efficiency: comparison between analytical and experimental data.

PubMed

Ciccarello, Annalisa; Bolognesi, Andrea; Maglionico, Marco; Artina, Sandro

2012-01-01

Roadside gully pots are the connecting points between surface runoff and the underground drainage network; therefore they can be considered as the most superficial component of urban drainage systems. Gully pots are supposed to trap particulate matter washed off the catchment surface, but also to collect and convey stormwater into the network. The continuous accumulation of particulate matter results in a progressive loss of the gully pot hydraulic conveyance, thereby increasing the probability of urban flooding during rainstorm events. This study has therefore the objective to determine which variables influence the gully pot capability of retaining solids (efficiency), both experimentally and analytically. Several laboratory tests have been performed on a simple plastic gully pot, with different inflow rates and using both mono and hetero-disperse particle samples. Particular attention has been given to the influence exerted by the way particle settling velocity is expressed: efficiency has been analytically determined by means of multiple settling velocity formulas proposed by various authors and eventually compared to experimental data. Results deriving from the adoption of each single settling velocity formula have been extensively analysed, showing fairly different outcomes.

From Eminent Men to Excellent Universities: University Rankings as Calculative Devices

ERIC Educational Resources Information Center

Hammarfelt, Björn; de Rijcke, Sarah; Wouters, Paul

2017-01-01

Global university rankings have become increasingly important "calculative devices" for assessing the "quality" of higher education and research. Their ability to make characteristics of universities "calculable" is here exemplified by the first proper university ranking ever, produced as early as 1910 by the American…

Crystal settling and crystal growth caused by Ostwald Ripening in a terrestrial magma ocean under rotation

NASA Astrophysics Data System (ADS)

Maas, C.; Moeller, A.; Hansen, U.

2013-12-01

About 4.5 billion years ago the earth was covered by a heavily convecting and rotating global magma ocean which was caused by an impact of a mars-sized impactor in a later stage of the earth's accretion. After the separation of metal and silicate (see A. Möller, U. Hansen (2013)) and the formation of the earth's core it began to crystallize. Small silicate crystals emerge and grow by Ostwald Ripening when the fluid is supersaturated. This process results in shrinking of small crystals and growing of large crystals on behalf of the smaller ones. This leads to an altering of the crystal settling time. One question which is still under great debate is whether fractional or equilibrium crystallization occurred in the magma ocean. Fractional crystallization means that different mineral fractions settle one after the other which would lead to a strongly differentiated mantle after solidification of the magma ocean. In contrast to that equilibrium crystallization would result in a well mixed mantle. Whether fractional or equilibrium crystallization occurred is for example important for the starting model of plate tectonics or the understanding of the mantle development until today. To study the change of crystal radius in a convecting and rotating magma ocean we employed a 3D numerical model. Due to the low viscosity and strong rotation the influence of rotation on the early magma Ocean cannot be neglected. In the model the crystals are able to influence each other and the fluid flow. They are able to grow, shrink, vanish and form and gravitational, Coriolis and drag forces due to the fluid act on them. In our present work we study the crystal settling depending on different rotation rates and rotation axes with two configurations. For the polar setting the rotation axis is parallel, at the equator it is perpendicular to gravity. Low rotation at the pole leads to a large fraction of suspended crystals. With increasing rotation the crystals settle and form a thick layer at the bottom of the magma ocean. At the equator we find three regimes (see A. Möller, U. Hansen (2013)) depending on the rotation strength. At low rotation a high fraction of silicate crystals settle at the bottom. At higher rotation the crystals form a thick layer in the bottom 1/3 of box. At high rotation all crystals are suspended and we observe a ribbon structure in the middle of the box. With a second model we investigate growing and shrinking of crystals by Ostwald Ripening and include formation and melting. In general we observe the same behaviour and regimes as described above, however due to Ostwald Ripening the evolution of crystal radius with time depends on the strength of rotation and on the orientation of the rotation axis. Very first results show that at the pole the growth of the silicate crystals is limited. The resulting small radius leads to a slow crystal settling. At the equator the crystals are able to grow larger than at the pole and therefore settle faster. This could lead to an asymmetrical crystallization of the magma ocean. In an extreme case due to the different settling times this could lead to a well mixed mantle at the pole whereas at the equator the mantle could be strongly differentiated after the solidification of the magma ocean.

Psychometric properties of the neck disability index amongst patients with chronic neck pain using item response theory.

PubMed

Saltychev, Mikhail; Mattie, Ryan; McCormick, Zachary; Laimi, Katri

2017-05-13

The Neck Disability Index (NDI) is commonly used for clinical and research assessment for chronic neck pain, yet the original version of this tool has not undergone significant validity testing, and in particular, there has been minimal assessment using Item Response Theory. The goal of the present study was to investigate the psychometric properties of the original version of the NDI in a large sample of individuals with chronic neck pain by defining its internal consistency, construct structure and validity, and its ability to discriminate between different degrees of functional limitation. This is a cross-sectional cohort study of 585 consecutive patients with chronic neck pain seen in a university hospital rehabilitation clinic. Internal consistency was evaluated using Cronbach's alpha, construct structure was evaluated by exploratory factor analysis, and discrimination ability was determined by Item Response Theory. The NDI demonstrated good internal consistency assessed by Cronbach's alpha (0.87). The exploratory factor analysis identified only one factor with eigenvalue considered significant (cutoff 1.0). When analyzed by Item Response Theory, eight out of 10 items demonstrated almost ideal difficulty parameter estimates. In addition, eight out of 10 items showed high to perfect estimates of discrimination ability (overall range 0.8 to 2.9). Amongst patients with chronic neck pain, the NDI was found to have good internal consistency, have unidimensional properties, and an excellent ability to distinguish patients with different levels of perceived disability. Implications for Rehabilitation The Neck Disability Index has good internal consistency, unidimensional properties, and an excellent ability to distinguish patients with different levels of perceived disability. The Neck Disability Index is recommended for use when selecting patients for rehabilitation, setting rehabilitation goals, and measuring the outcome of intervention.

Ash Dispersal in Planetary Atmospheres: Continuum vs. Non-continuum Effects

NASA Astrophysics Data System (ADS)

Fagents, S. A.; Baloga, S. M.; Glaze, L. S.

2013-12-01

The dispersal of ash from a volcanic vent on any given planet is dictated by particle properties (density, shape, and size distribution), the intensity of the eruptive source, and the characteristics of the planetary environment (atmospheric structure, wind field, and gravity) into which the ash is erupted. Relating observations of potential pyroclastic deposits to source locations and eruption conditions requires a detailed quantitative understanding of the settling rates of individual particles under changing ambient conditions. For atmospheres that are well described by continuum mechanics, the conventional Newtonian description of particle motion allows particle settling velocities to be related to particle characteristics via a drag coefficient. However, under rarefied atmospheric conditions (i.e., on Mars and at high altitude on Earth), non-continuum effects become important for ash-sized particles, and an equation of motion based on statistical mechanics is required for calculating particle motion. We have developed a rigorous new treatment of particle settling under variable atmospheric conditions and applied it to Earth and Mars. When non-continuum effects are important (as dictated by the mean free path of atmospheric gas relative to the particle size), fall velocities are greater than those calculated by continuum mechanics. When continuum conditions (i.e., higher atmospheric densities) are reached during descent, our model switches to a conventional formulation that determines the appropriate drag coefficient as the particle transits varying atmospheric properties. The variation of settling velocity with altitude allows computation of particle trajectories, fall durations and downwind dispersal. Our theoretical and numerical analyses show that several key, competing factors strongly influence the downwind trajectories of ash particles and the extents of the resulting deposits. These factors include: the shape of the particles (non-spherical particles fall more slowly than spherical particle shapes commonly adopted in settling models); the formation of particle aggregates, which enhances settling rates; and the lagging of particle motion behind the ambient wind field, which results in less widely dispersed deposits. Above all, any particles experiencing non-continuum effects settle faster and are less widely dispersed than particles falling in an entirely continuum regime. Our model results demonstrate the complex interplay of these factors in the Martian environment, and our approach provides a basis for relating deposits observed in planetary datasets to candidate volcanic sources and eruption conditions. This allows for a critical reassessment of the potential for explosive volcanism to contribute to extremely widespread, fine-grained, layered deposits such as the Medusae Fossae Formation.

Shallow ground-water flow, water levels, and quality of water, 1980-84, Cowles Unit, Indiana Dunes National Lakeshore

USGS Publications Warehouse

Cohen, D.A.; Shedlock, R.J.

1986-01-01

Since the settling ponds were sealed, the concentration of boron has decreased while concentrations of cadmium, arsenic, zinc, and molybdenum in shallow ground water downgradient of the ponds show no definite trends in time. Arsenic, boron and molybdenum have remained at concentrations above those of shallow ground water in areas unaffected by settling-pond seepage.

Faculty in New Jobs: A Guide to Settling In, Becoming Established, and Building Institutional Support. Jossey-Bass Higher and Adult Education Series.

ERIC Educational Resources Information Center

Menges, Robert, Ed.

This book is comprised of 14 papers developed for the New Faculty Project, a career development project for college faculty. Papers are grouped into sections which address orientation and settling in of new faculty; how faculty members get established within the institution; and how faculty build institutional supports. The papers are: (1) "Being…

CHARACTERIZATION OF THE DUST/SMOKE AEROSOL THAT SETTLED EAST OF THE WORLD TRADE CENTER (WTC) IN LOWER MANHATTAN AFTER THE COLLAPSE OF THE WTC 11 SEPTEMBER 2001

EPA Science Inventory

The explosion and collapse of the World Trade Center (WTC) was a catastrophic event that produced an aerosol plume impacting many workers, residents, and commuters during the first few days after 11 September 2001. Three bulk samples of the total settled dust and smoke were col...

76 FR 2134 - Notice of Lodging of Consent Decree Under the Comprehensive Environmental Response, Compensation...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-12

... Seven Out, LLC and BCX, Inc. (``Settling Defendants'') in United States of America v. Seven Out LLC, and BCX, Inc., Case No. 3:11-cv-0009-UAMH-MCR (U.S.D.C. M.D. Fla.), with respect to the BCX Tank Superfund... at or from the Site. Financial information provided by the Settling Defendants indicated an inability...

21 CFR 1404.635 - May the Office of National Drug Control Policy settle a debarment or suspension action?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false May the Office of National Drug Control Policy settle a debarment or suspension action? 1404.635 Section 1404.635 Food and Drugs OFFICE OF NATIONAL DRUG CONTROL POLICY GOVERNMENTWIDE DEBARMENT AND SUSPENSION (NONPROCUREMENT) General Principles Relating to Suspension and Debarment Actions § 1404.635...

Characterization and modeling of sediment settling, consolidation, and suspension to optimize coastal Louisiana restoration

NASA Astrophysics Data System (ADS)

Sha, X.; Xu, K.; Bentley, S. J.; Robichaux, P. A.

2018-04-01

Many research efforts have been undertaken over many decades in the field of Louisiana coastal restoration, but long-term experiments for sediment suspension and consolidation in diversion-receiving basins are still limited, despite significance of this topic to ongoing restoration strategies. Sediment samples were collected from two active diversions on the Mississippi River: West Bay, a semi-enclosed bay located on the Mississippi River Delta and fed by the West Bay Diversion, and from Big Mar pond, a receiving basin of the Caernarvon freshwater diversion from the lower Mississippi River, Louisiana, USA. A dual-core Gust Erosion Microcosm System was used to measure time-series (0.5, 1, 2, 3, 4, 5, and 6-months after initial settling) erodibility at seven shear stress regimes (0.01-0.60 Pa) using experimental cores prepared with two initial sediment concentrations (60 and 120 kg m-3). A 230-cm tall settling column with nine sampling ports was used to measure the consolidation rates for initial sediment concentrations ranging from fluid mud (10 kg m-3) to dredge effluent (120 kg m-3), in combination with two levels of salinity (1 and 5). The erodibility of West Bay sediment decreased with increasing time of consolidation. The critical shear stress for resuspension increased from 0.2 Pa after 2 months to 0.45 Pa after 4 months of consolidation. The consolidation rates were inversely and exponentially related to initial sediment concentrations. Consolidation tests in salinity of 1 generally settled faster than that in salinity of 5, and consolidation tests with low sediment concentration tests generally settled faster than high-concentration tests. An exponential coefficient was added in the Sanford (2008) model to better predict the consolidation profile of both rapid early settling and slow self-weight consolidation processes. Our study suggests that enclosed basin, low salinity, relatively low sediment concentration and minimized disturbance for 4 months all favor of mud deposition and retention, and these factors should be considered in the design of coastal restoration projects such as dredging effluent placements and sediment diversions.

Geochemistry of mercury and other constituents in subsurface sediment—Analyses from 2011 and 2012 coring campaigns, Cache Creek Settling Basin, Yolo County, California

USGS Publications Warehouse

Arias, Michelle R.; Alpers, Charles N.; Marvin-DiPasquale, Mark C.; Fuller, Christopher C.; Agee, Jennifer L.; Sneed, Michelle; Morita, Andrew Y.; Salas, Antonia

2017-10-31

Cache Creek Settling Basin was constructed in 1937 to trap sediment from Cache Creek before delivery to the Yolo Bypass, a flood conveyance for the Sacramento River system that is tributary to the Sacramento–San Joaquin Delta. Sediment management options being considered by stakeholders in the Cache Creek Settling Basin include sediment excavation; however, that could expose sediments containing elevated mercury concentrations from historical mercury mining in the watershed. In cooperation with the California Department of Water Resources, the U.S. Geological Survey undertook sediment coring campaigns in 2011–12 (1) to describe lateral and vertical distributions of mercury concentrations in deposits of sediment in the Cache Creek Settling Basin and (2) to improve constraint of estimates of the rate of sediment deposition in the basin.Sediment cores were collected in the Cache Creek Settling Basin, Yolo County, California, during October 2011 at 10 locations and during August 2012 at 5 other locations. Total core depths ranged from approximately 4.6 to 13.7 meters (15 to 45 feet), with penetration to about 9.1 meters (30 feet) at most locations. Unsplit cores were logged for two geophysical parameters (gamma bulk density and magnetic susceptibility); then, selected cores were split lengthwise. One half of each core was then photographed and archived, and the other half was subsampled. Initial subsamples from the cores (20-centimeter composite samples from five predetermined depths in each profile) were analyzed for total mercury, methylmercury, total reduced sulfur, iron speciation, organic content (as the percentage of weight loss on ignition), and grain-size distribution. Detailed follow-up subsampling (3-centimeter intervals) was done at six locations along an east-west transect in the southern part of the Cache Creek Settling Basin and at one location in the northern part of the basin for analyses of total mercury; organic content; and cesium-137, which was used for dating. This report documents site characteristics; field and laboratory methods; and results of the analyses of each core section and subsample of these sediment cores, including associated quality-assurance and quality-control data.

Acetate injection into anaerobic settled sludge for biological P-removal in an intermittently aerated reactor.

PubMed

Ahn, K H; Yoo, H; Lee, J W; Maeng, S K; Park, K Y; Song, K G

2001-01-01

Injecting acetate into the sludge layer during the settling and decanting periods was adopted to enhance phosphorus release inside the sludge layer during those periods and phosphorus uptake during the subsequent aeration period in a KIST Intermittently Decanted Extended Aeration (KIDEA) process. The relationship among nitrification, denitrification and phosphorus removal was investigated in detail and analyzed with a qualitative floc model. Dependencies of nitrification on the maximum DO level during the aerobic phase and phosphorus release on residual nitrate concentration during the settling phase were significant. High degree of nitrification resulted that phosphorus release inside the sludge layer was significantly interfered with nitrate due to the limitation of available acetate and the carbon sources from influent. Such limitation was related to the primary utilization of organic substance for denitrification in the outer layer of the floc and the retarded mass transfer into the inner layer of the floc. Nevertheless, effects of acetate injection on both denitrification and phosphorus release during the settling phase were significant. Denitrification rate after acetate injection was two times as high as that before acetate injection, and phosphorus release reached about 14 mg PO4(3-)-P/g MLVSS/hr during the decanting phase after the termination of denitrification inside the sludge layer. Extremely low level of maximum DO (around 0.5 mg/L) during the aerobic phase may inhibited nitrification, considerably, and thus nearly no nitrate was present. However, the absence of nitrate increased when the phosphorus release rate was reached up to 33 mg PO4(3-)-P/g MLVSS/hr during the settling and decanting phase, and nearly all phosphorus was taken up during subsequent aerobic phase. Since the sludge layer could function as a blocking layer, phosphorus concentrations in the supernatant was not influenced by the released phosphorus inside the sludge layer during the settling and decanting period. Phosphorus removal was directly (for uptake) and indirectly (for release) dependent on the median and maximum DO concentration during the aerobic phase, and those optimal values may exist within the range from 0.2 to 0.6 mg/L and 0.4 to 1.2 mg/L, respectively.

Wise Guys: "The Man Who Knew Infinity" and Other Movies about Uppity Geniuses

ERIC Educational Resources Information Center

Beck, Bernard

2017-01-01

Conventional expectations about subcultural groups can be undermined by unusual performances of some individual members. Several recent movies have concerned people of exceptional ability who unexpectedly excelled at prestigious centers of learning. "The Man Who Knew Infinity," "The Imitation Game," and "The Theory of…

New Mexico Educator Equity Plan

ERIC Educational Resources Information Center

New Mexico Public Education Department, 2015

2015-01-01

Both the U.S. Department of Education and the New Mexico Public Education Department (PED) believe that equal opportunity is a core American value. Equal access to excellent education provides meaningful opportunities for students to achieve their goals. Recognizing that family income and race often predicts a student's ability to access excellent…

Dancing Solutions to Conflict: Field-Tested Somatic Dance for Peace

ERIC Educational Resources Information Center

Eddy, Martha

2016-01-01

The ability to creatively resolve conflict supports excellence in communication and fosters a positive classroom/studio climate. Despite the fact that school violence continues to be high, many schools fail to teach conflict management, social-emotional skills, or community building to all educators. This research-based article shares dance…

Four-Year Colleges Should Admit More Community College Students

ERIC Educational Resources Information Center

Levy, Harold O.

2016-01-01

Defying the stereotype that they lack the academic preparation and ability to succeed at top colleges and universities, community college students have gone on to distinguish themselves at prestigious four-year institutions year after year. These students have proven to be extraordinarily bright, hardworking and capable of excelling, and have…

How to study effectively

PubMed Central

Fowler, Alexander; Whitehurst, Katharine; Al Omran, Yasser; Rajmohan, Shivanchan; Udeaja, Yagazie; Koshy, Kiron

2017-01-01

The ability to study effectively is an essential part of completing a medical degree. To cope with the vast amount of information and skills needed to be acquired, it is necessary develop effective study techniques. In this article we outline the various methods students can use to excel in upcoming examinations. PMID:29177223

Engineered carbon (biochar) prepared by direct pyrolysis of Mg-accumulated tomato tissues: Characterization and phosphate removal potential

USDA-ARS?s Scientific Manuscript database

An innovative synthesis was developed to produce engineered biochar from magnesium (Mg) enriched tomato tissues through slow pyrolysis in a N2 environment. The resulting Mg-biochar composites showed excellent sorption ability to phosphate in aqueous solutions. The engineered biochar contained nanosc...

Teaching to What Students Have in Common

ERIC Educational Resources Information Center

Willingham, Daniel; Daniel, David

2012-01-01

Although students vary in their abilities and interests, "hyper-individualizing" the curriculum in an attempt to accommodate these differences is not the best way to help each student excel, write Willingham and Daniel. Drawing on educational research, the authors give examples of several cognitive must haves (things that the cognitive system…

Using Kolb's Experiential Learning Cycle in Chapter Presentations

ERIC Educational Resources Information Center

Stokes-Eley, Stephanie

2007-01-01

Student-led chapter presentations provide an excellent opportunity for instructors to evaluate a student's comprehension of the assigned chapter, as well as the student's ability to present and convey information in a public forum. Although several instructors realize the benefits of requiring students to complete chapter presentations either as…

Communication as a core skill of palliative surgical care.

PubMed

Miner, Thomas J

2012-03-01

Excellence as a surgeon requires not only the technical and intellectual ability to effectively take care of surgical disease but also an ability to respond to the needs and questions of patients. This article provides an overview of the importance of communication skills in optimal surgical palliation and offers suggestions for a multidisciplinary team approach, using the palliative triangle as the ideal model of communication and interpersonal skills. This article also discusses guidelines for advanced surgical decision making and outlines methods to improve communication skills. Copyright © 2012 Elsevier Inc. All rights reserved.

Communication skills in palliative surgery: skill and effort are key.

PubMed

Miner, Thomas J

2011-04-01

Excellence as a surgeon requires not only the technical and intellectual ability to effectively take care of surgical disease but also an ability to respond to the needs and questions of patients. This article provides an overview of the importance of communication skills in optimal surgical palliation and offers suggestions for a multidisciplinary team approach, using the palliative triangle as the ideal model of communication and interpersonal skills. This article also discusses guidelines for advanced surgical decision making and outlines methods to improve communication skills. Copyright © 2011 Elsevier Inc. All rights reserved.

A framework for promoting scholarship productivity in occupational therapy curricula.

PubMed

Scott, P J; Justiss, M J; Schmid, A A; Fisher, T F

2013-01-01

This paper describes a curricular model to support the production of quality research and development of occupational therapy professional students, prepared to become leaders in the production and utilization of evidence for practice. This model is designed for programs with faculty challenged by the dual mandate of program excellence and expectations for scholarly productivity needed for tenure and promotion: typically programs at research universities. The essence of the model is the paralleling of research and competencies for clinical practice where faculty and students participate as a community of scholars. It is based on the literature that addresses the tensions between achieving excellence in research and scholarly productivity, and excellence in teaching. The experience of one university with this model over a five-year period of time is shared with the student-faculty productivity outcomes. These outcomes include dissemination of 55 collaborative peer reviewed products and faculty has generated support for 25 paid graduate assistantships. The combination of student outcomes and faculty support for their research has strengthened the ability of the faculty to excel in meeting the University mandate of scholarship while providing a high quality professional educational program.

Settling velocity and preferential concentration of heavy particles under two-way coupling effects in homogeneous turbulence

NASA Astrophysics Data System (ADS)

Monchaux, R.; Dejoan, A.

2017-10-01

The settling velocity of inertial particles falling in homogeneous turbulence is investigated by making use of direct numerical simulation (DNS) at moderate Reynolds number that include momentum exchange between both phases (two-way coupling approach). Effects of particle volume fraction, particle inertia, and gravity are presented for flow and particle parameters similar to the experiments of Aliseda et al. [J. Fluid Mech. 468, 77 (2002), 10.1017/S0022112002001593]. A good agreement is obtained between the DNS and the experiments for the settling velocity statistics, when overall averaged, but as well when conditioned on the local particle concentration. Both DNS and experiments show that the settling velocity further increases with increasing volume fraction and local concentration. At the considered particle loading the effects of two-way coupling is negligible on the mean statistics of turbulence. Nevertheless, the DNS results show that fluid quantities are locally altered by the particles. In particular, the conditional average on the local particle concentration of the slip velocity shows that the main contribution to the settling enhancement results from the increase of the fluid velocity surrounding the particles along the gravitational direction induced by the collective particle back-reaction force. Particles and the surrounding fluid are observed to fall together, which in turn results in an amplification of the sampling of particles in the downward fluid motion. Effects of two-way coupling on preferential concentration are also reported. Increase of both volume fraction and gravity is shown to lower preferential concentration of small inertia particles while a reverse tendency is observed for large inertia particles. This behavior is found to be related to an attenuation of the centrifuge effects and to an increase of particle accumulation along gravity direction, as particle loading and gravity become large.