Research on the effect of coverage rate on the surface quality in laser direct writing process

NASA Astrophysics Data System (ADS)

Pan, Xuetao; Tu, Dawei

2017-07-01

Direct writing technique is usually used in femtosecond laser two-photon micromachining. The size of the scanning step is an important factor affecting the surface quality and machining efficiency of micro devices. According to the mechanism of two-photon polymerization, combining the distribution function of light intensity and the free radical concentration theory, we establish the mathematical model of coverage of solidification unit, then analyze the effect of coverage on the machining quality and efficiency. Using the principle of exposure equivalence, we also obtained the analytic expressions of the relationship among the surface quality characteristic parameters of microdevices and the scanning step, and carried out the numerical simulation and experiment. The results show that the scanning step has little influence on the surface quality of the line when it is much smaller than the size of the solidification unit. However, with increasing scanning step, the smoothness of line surface is reduced rapidly, and the surface quality becomes much worse.

Automatic cloud tracking applied to GOES and Meteosat observations

NASA Technical Reports Server (NTRS)

Endlich, R. M.; Wolf, D. E.

1981-01-01

An improved automatic processing method for the tracking of cloud motions as revealed by satellite imagery is presented and applications of the method to GOES observations of Hurricane Eloise and Meteosat water vapor and infrared data are presented. The method is shown to involve steps of picture smoothing, target selection and the calculation of cloud motion vectors by the matching of a group at a given time with its best likeness at a later time, or by a cross-correlation computation. Cloud motion computations can be made in as many as four separate layers simultaneously. For data of 4 and 8 km resolution in the eye of Hurricane Eloise, the automatic system is found to provide results comparable in accuracy and coverage to those obtained by NASA analysts using the Atmospheric and Oceanographic Information Processing System, with results obtained by the pattern recognition and cross correlation computations differing by only fractions of a pixel. For Meteosat water vapor data from the tropics and midlatitudes, the automatic motion computations are found to be reliable only in areas where the water vapor fields contained small-scale structure, although excellent results are obtained using Meteosat IR data in the same regions. The automatic method thus appears to be competitive in accuracy and coverage with motion determination by human analysts.

Geodetic integration of Sentinel-1A IW data using PSInSAR in Hungary

NASA Astrophysics Data System (ADS)

Farkas, Péter; Hevér, Renáta; Grenerczy, Gyula

2015-04-01

ESA's latest Synthetic Aperture Radar (SAR) mission Sentinel-1 is a huge step forward in SAR interferometry. With its default acquisition mode called the Interferometric Wide Swath Mode (IW) areas through all scales can be mapped with an excellent return time of 12 days (while only the Sentinel-1A is in orbit). Its operational data policy is also a novelty, it allows scientific users free and unlimited access to data. It implements a new type of ScanSAR mode called Terrain Observation with Progressive Scan (TOPS) SAR. It has the same resolution as ScanSAR but with better signal-to-noise ratio distribution. The bigger coverage is achieved by rotation of the antenna in the azimuth direction, therefore it requires very precise co-registration because even errors under a pixel accuracy can introduce azimuth phase variations caused by differences in Doppler-centroids. In our work we will summarize the benefits and the drawbacks of the IW mode. We would like to implement the processing chain of GAMMA Remote Sensing of such data for mapping surface motion with special attention to the co-registration step. Not only traditional InSAR but the advanced method of Persistent Scatterer InSAR (PSInSAR) will be performed and presented as well. PS coverage, along with coherence, is expected to be good due to the small perpendicular and temporal baselines. We would also like to integrate these measurements into national geodetic networks using common reference points. We have installed trihedral corner reflectors at some selected sites to aid precise collocation. Thus, we aim to demonstrate that Sentinel-1 can be effectively used for surface movement detection and monitoring and it can also provide valuable information for the improvement of our networks.

Overcoming Short-Circuit in Lead-Free CH3NH3SnI3 Perovskite Solar Cells via Kinetically Controlled Gas-Solid Reaction Film Fabrication Process.

PubMed

Yokoyama, Takamichi; Cao, Duyen H; Stoumpos, Constantinos C; Song, Tze-Bin; Sato, Yoshiharu; Aramaki, Shinji; Kanatzidis, Mercouri G

2016-03-03

The development of Sn-based perovskite solar cells has been challenging because devices often show short-circuit behavior due to poor morphologies and undesired electrical properties of the thin films. A low-temperature vapor-assisted solution process (LT-VASP) has been employed as a novel kinetically controlled gas-solid reaction film fabrication method to prepare lead-free CH3NH3SnI3 thin films. We show that the solid SnI2 substrate temperature is the key parameter in achieving perovskite films with high surface coverage and excellent uniformity. The resulting high-quality CH3NH3SnI3 films allow the successful fabrication of solar cells with drastically improved reproducibility, reaching an efficiency of 1.86%. Furthermore, our Kelvin probe studies show the VASP films have a doping level lower than that of films prepared from the conventional one-step method, effectively lowering the film conductivity. Above all, with (LT)-VASP, the short-circuit behavior often obtained from the conventional one-step-fabricated Sn-based perovskite devices has been overcome. This study facilitates the path to more successful Sn-perovskite photovoltaic research.

Polyethylene Ear Reconstruction: A State-of-the-Art Surgical Journey.

PubMed

Reinisch, John; Tahiri, Youssef

2018-02-01

The use of a porous high-density polyethylene implant for ear reconstruction is gradually gaining acceptance because it allows for a pleasing ear reconstruction in young children before they enter school. In response to this growing interest, the authors decided to write an article clarifying in detail all the steps of this challenging procedure. In this article, the authors also answer all the common questions that surgeons have when they come to observe the operation, or when they go back to their respective practices and start performing this procedure. The authors describe in detail the operative steps that allow for a successful ear reconstruction using porous high-density polyethylene. The key parts of this operation are to meticulously harvest a well-vascularized superficial temporoparietal fascia flap and to use appropriate color-matched skin grafts. This method allows for a pleasing ear reconstruction with excellent definition, projection, symmetry, and long-term viability. The use of porous high-density polyethylene with a thin superficial temporoparietal fascia flap coverage is the authors' preferred method of ear reconstruction because it can be performed at an earlier age, in a single stage, as an outpatient procedure, and with minimal discomfort and psychological trauma for the patients and parents.

Off-Marketplace Enrollment Remains An Important Part Of Health Insurance Under The ACA.

PubMed

Goddeeris, John H; McMorrow, Stacey; Kenney, Genevieve M

2017-08-01

The introduction of Marketplaces under the Affordable Care Act greatly expanded individual-market health insurance coverage in 2014, but millions of adults continued to purchase individual coverage outside of the Marketplaces. They were more likely to be male, be white, have higher incomes, and be in excellent or very good health, compared to Marketplace enrollees. Project HOPE—The People-to-People Health Foundation, Inc.

SCEW: a Microsoft Excel add-in for easy creation of survival curves.

PubMed

Khan, Haseeb Ahmad

2006-07-01

Survival curves are frequently used for reporting survival or mortality outcomes of experimental pharmacological/toxicological studies and of clinical trials. Microsoft Excel is a simple and widely used tool for creation of numerous types of graphic presentations however it is difficult to create step-wise survival curves in Excel. Considering the familiarity of clinicians and biomedical scientists with Excel, an algorithm survival curves in Excel worksheet (SCEW) has been developed for easy creation of survival curves directly in Excel worksheets. The algorithm has been integrated in the form of Excel add-in for easy installation and usage. The program is based on modification of frequency data for binary break-up using the spreadsheet formula functions whereas a macro subroutine automates the creation of survival curves. The advantages of this program are simple data input, minimal procedural steps and the creation of survival curves in the familiar confines of Excel.

Medication coverage for lawmakers may worsen access for everyone else.

PubMed

Taglione, Michael S; Boozary, Andrew; Persaud, Nav

2018-03-01

Despite numerous recommendations for universal public coverage of prescription drugs in Canada based on evidence that millions of Canadians cannot afford medications, no province or territory has adopted first dollar coverage for all residents. However, one group unaffected by the lack of public coverage are lawmakers. Lawmakers receive excellent drug coverage plans for themselves and their immediate families. Evidence suggests that lawmakers' decisions are influenced by their personal circumstances; in this case, they are insulated from the effects of poor access to medications by their drug coverage plans. In contrast, a patchwork system of 46 programs across Canada provides some drug coverage to vulnerable populations. Reducing the disparity in prescription drug access between Canadian lawmakers and the public may promote progress towards better medication access for everyone. This could be achieved either by reducing lawmaker coverage or improving upon the public patchwork system. Since the goal should be to improve the overall access of medications for all Canadians, lawmakers included, the latter method is preferred. A universal drug plan with first dollar coverage could replace the current patchwork system and expand coverage to all Canadians. Copyright © 2017 Elsevier Inc. All rights reserved.

Utilizing collagen membranes for guided tissue regeneration-based root coverage.

PubMed

Wang, Hom-Lay; Modarressi, Marmar; Fu, Jia-Hui

2012-06-01

Gingival recession is a common clinical problem that can result in hypersensitivity, pain, root caries and esthetic concerns. Conventional soft tissue procedures for root coverage require an additional surgical site, thereby causing additional trauma and donor site morbidity. In addition, the grafted tissues heal by repair, with formation of long junctional epithelium with some connective tissue attachment. Guided tissue regeneration-based root coverage was thus developed in an attempt to overcome these limitations while providing comparable clinical results. This paper addresses the biologic foundation of guided tissue regeneration-based root coverage, and describes the indications and contraindications for this technique, as well as the factors that influence outcomes. The step-by-step clinical techniques utilizing collagen membranes are also described. In comparison with conventional soft tissue procedures, the benefits of guided tissue regeneration-based root coverage procedures include new attachment formation, elimination of donor site morbidity, less chair-time, and unlimited availability and uniform thickness of the product. Collagen membranes, in particular, benefit from product biocompatibility with the host, while promoting chemotaxis, hemostasis, and exchange of gas and nutrients. Such characteristics lead to better wound healing by promoting primary wound coverage, angiogenesis, space creation and maintenance, and clot stability. In conclusion, collagen membranes are a reliable alternative for use in root coverage procedures. © 2012 John Wiley & Sons A/S.

Ultraviolet, Infrared, and High-Low Energy Photodissociation of Post-Translationally Modified Peptides

NASA Astrophysics Data System (ADS)

Halim, Mohammad A.; MacAleese, Luke; Lemoine, Jérôme; Antoine, Rodolphe; Dugourd, Philippe; Girod, Marion

2018-02-01

Mass spectrometry-based methods have made significant progress in characterizing post-translational modifications in peptides and proteins; however, certain aspects regarding fragmentation methods must still be improved. A good technique is expected to provide excellent sequence information, locate PTM sites, and retain the labile PTM groups. To address these issues, we investigate 10.6 μm IRMPD, 213 nm UVPD, and combined UV and IR photodissociation, known as HiLoPD (high-low photodissociation), for phospho-, sulfo-, and glyco-peptide cations. IRMPD shows excellent backbone fragmentation and produces equal numbers of N- and C-terminal ions. The results reveal that 213 nm UVPD and HiLoPD methods can provide diverse backbone fragmentation producing a/x, b/y, and c/z ions with excellent sequence coverage, locate PTM sites, and offer reasonable retention efficiency for phospho- and glyco-peptides. Excellent sequence coverage is achieved for sulfo-peptides and the position of the SO3 group can be pinpointed; however, widespread SO3 losses are detected irrespective of the methods used herein. Based on the overall performance achieved, we believe that 213 nm UVPD and HiLoPD can serve as alternative options to collision activation and electron transfer dissociations for phospho- and glyco-proteomics.

A Practical Tutorial on Modified Condition/Decision Coverage

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Veerhusen, Dan S.; Chilenski, John J.; Rierson, Leanna K.

2001-01-01

This tutorial provides a practical approach to assessing modified condition/decision coverage (MC/DC) for aviation software products that must comply with regulatory guidance for DO-178B level A software. The tutorial's approach to MC/DC is a 5-step process that allows a certification authority or verification analyst to evaluate MC/DC claims without the aid of a coverage tool. In addition to the MC/DC approach, the tutorial addresses factors to consider in selecting and qualifying a structural coverage analysis tool, tips for reviewing life cycle data related to MC/DC, and pitfalls common to structural coverage analysis.

Computerized ionospheric tomography based on geosynchronous SAR

NASA Astrophysics Data System (ADS)

Hu, Cheng; Tian, Ye; Dong, Xichao; Wang, Rui; Long, Teng

2017-02-01

Computerized ionospheric tomography (CIT) based on spaceborne synthetic aperture radar (SAR) is an emerging technique to construct the three-dimensional (3-D) image of ionosphere. The current studies are all based on the Low Earth Orbit synthetic aperture radar (LEO SAR) which is limited by long repeat period and small coverage. In this paper, a novel ionospheric 3-D CIT technique based on geosynchronous SAR (GEO SAR) is put forward. First, several influences of complex atmospheric environment on GEO SAR focusing are detailedly analyzed, including background ionosphere and multiple scattering effects (induced by turbulent ionosphere), tropospheric effects, and random noises. Then the corresponding GEO SAR signal model is constructed with consideration of the temporal-variant background ionosphere within the GEO SAR long integration time (typically 100 s to 1000 s level). Concurrently, an accurate total electron content (TEC) retrieval method based on GEO SAR data is put forward through subband division in range and subaperture division in azimuth, obtaining variant TEC value with respect to the azimuth time. The processing steps of GEO SAR CIT are given and discussed. Owing to the short repeat period and large coverage area, GEO SAR CIT has potentials of covering the specific space continuously and completely and resultantly has excellent real-time performance. Finally, the TEC retrieval and GEO SAR CIT construction are performed by employing a numerical study based on the meteorological data. The feasibility and correctness of the proposed methods are verified.

Fascial flap reconstruction of the hand: a single surgeon's 30-year experience.

PubMed

Carty, Matthew J; Taghinia, Amir; Upton, Joseph

2010-03-01

The reconstruction of complex hand wounds is challenging due to the requirements for thin and pliable coverage with a reliable vascular supply, potential for sensibility, and provision of a gliding surface. Fascial flaps represent an excellent option for the reconstruction of these complicated defects. A retrospective review of fascial flap reconstructive procedures to the hand undertaken by a single microsurgeon was performed for operations occurring between 1979 and 2009. Both pedicled and free tissue transfer procedures were included in both pediatric and adult patients. Data were culled from a combination of patient charts, hospital records, radiographic studies, and clinical photographs. Sixty fascial flap reconstructive procedures to the hand were analyzed in 60 patients from the defined 30-year period. The most common pathological process necessitating reconstruction was acute trauma (n = 32, 53 percent). Most of the soft-tissue injuries included in the study sample were located on the dorsal hand and wrist (n = 27, 45 percent). The most commonly utilized reconstructive modality was the temporoparietal fascial flap (n = 35, 58 percent). Most reconstructions were completed as free tissue transfers (n = 46, 77 percent). Perioperative complications were relatively minor; no flap losses were recorded. All cases studied demonstrated excellent long-term coverage with no evidence of underlying tendon adhesion or contracture. Fascial flaps represent an excellent option for coverage of soft-tissue defects of the hand that are not amenable to reconstruction with skin grafting alone, particularly for localized defects with denuded tendons or exposed joints.

J-Adaptive estimation with estimated noise statistics. [for orbit determination

NASA Technical Reports Server (NTRS)

Jazwinski, A. H.; Hipkins, C.

1975-01-01

The J-Adaptive estimator described by Jazwinski and Hipkins (1972) is extended to include the simultaneous estimation of the statistics of the unmodeled system accelerations. With the aid of simulations it is demonstrated that the J-Adaptive estimator with estimated noise statistics can automatically estimate satellite orbits to an accuracy comparable with the data noise levels, when excellent, continuous tracking coverage is available. Such tracking coverage will be available from satellite-to-satellite tracking.

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis.

PubMed

Neyeloff, Jeruza L; Fuchs, Sandra C; Moreira, Leila B

2012-01-20

Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software.

Meta-analyses and Forest plots using a microsoft excel spreadsheet: step-by-step guide focusing on descriptive data analysis

PubMed Central

2012-01-01

Background Meta-analyses are necessary to synthesize data obtained from primary research, and in many situations reviews of observational studies are the only available alternative. General purpose statistical packages can meta-analyze data, but usually require external macros or coding. Commercial specialist software is available, but may be expensive and focused in a particular type of primary data. Most available softwares have limitations in dealing with descriptive data, and the graphical display of summary statistics such as incidence and prevalence is unsatisfactory. Analyses can be conducted using Microsoft Excel, but there was no previous guide available. Findings We constructed a step-by-step guide to perform a meta-analysis in a Microsoft Excel spreadsheet, using either fixed-effect or random-effects models. We have also developed a second spreadsheet capable of producing customized forest plots. Conclusions It is possible to conduct a meta-analysis using only Microsoft Excel. More important, to our knowledge this is the first description of a method for producing a statistically adequate but graphically appealing forest plot summarizing descriptive data, using widely available software. PMID:22264277

Adsorption of xenon on vicinal copper and platinum surfaces

NASA Astrophysics Data System (ADS)

Baker, Layton

The adsorption of xenon was studied on Cu(111), Cu(221), Cu(643) and on Pt(111), Pt(221), and Pt(531) using low energy electron diffraction (LEED), temperature programmed desorption (TPD) of xenon, and ultraviolet photoemission of adsorbed xenon (PAX). These experiments were performed to study the atomic and electronic structure of stepped and step-kinked, chiral metal surfaces. Xenon TPD and PAX were performed on each surface in an attempt to titrate terrace, step edge, and kink adsorption sites by adsorption energetics (TPD) and local work function differences (PAX). Due to the complex behavior of xenon on the vicinal copper and platinum metal surfaces, adsorption sites on these surfaces could not be adequately titrated by xenon TPD. On Cu(221) and Cu(643), xenon desorption from step adsorption sites was not apparent leading to the conclusion that the energy difference between terrace and step adsorption is minuscule. On Pt(221) and Pt(531), xenon TPD indicated that xenon prefers to bond at step edges and that the xenon-xenon interaction at step edges in repulsive but no further indication of step-kink adsorption was observed. The Pt(221) and Pt(531) TPD spectra indicated that the xenon overlayer undergoes strong compression near monolayer coverage on these surfaces due to repulsion between step-edge adsorbed xenon and other encroaching xenon atoms. The PAX experiments on the copper and platinum surfaces demonstrated that the step adsorption sites have lower local work functions than terrace adsorption sites and that higher step density leads to a larger separation in the local work function of terrace and step adsorption sites. The PAX spectra also indicated that, for all surfaces studied at 50--70 K, step adsorption is favored at low coverage but the step sites are not saturated until monolayer coverage is reached; this observation is due to the large entropy difference between terrace and step adsorption states and to repulsive interactions between xenon atoms adsorbed at step edges (on the platinum surfaces). The results herein provide several novel observations regarding the adsorptive behavior of xenon on vicinal copper and platinum surfaces.

Inkjet Deposition of Layer by Layer Assembled Films

PubMed Central

Andres, Christine M.; Kotov, Nicholas A.

2010-01-01

Layer-by-layer assembly (LBL) can create advanced composites with exceptional properties unavailable by other means, but the laborious deposition process and multiple dipping cycles hamper their utilization in microtechnologies and electronics. Multiple rinse steps provide both structural control and thermodynamic stability to LBL multilayers but they significantly limit their practical applications and contribute significantly to the processing time and waste. Here we demonstrate that by employing inkjet technology one can deliver the necessary quantities of LBL components required for film build-up without excess, eliminating the need for repetitive rinsing steps. This feature differentiates this approach from all other recognized LBL modalities. Using a model system of negatively charged gold nanoparticles and positively charged poly(diallyldimethylammonium) chloride, the material stability, nanoscale control over thickness and particle coverage offered by the inkjet LBL technique are shown to be equal or better than the multilayers made with traditional dipping cycles. The opportunity for fast deposition of complex metallic patterns using a simple inkjet printer was also shown. The additive nature of LBL deposition based on the formation of insoluble nanoparticle-polyelectrolyte complexes of various compositions provides an excellent opportunity for versatile, multi-component, and non-contact patterning for the simple production of stratified patterns that are much needed in advanced devices. PMID:20863114

Overcoming Short-Circuit in Lead-Free CH 3 NH 3 SnI 3 Perovskite Solar Cells via Kinetically Controlled Gas–Solid Reaction Film Fabrication Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yokoyama, Takamichi; Cao, Duyen H.; Stoumpos, Constantinos C.

2016-02-17

The development of Sn-based perovskite solar cells has been challenging because devices often show short-circuit behavior due to poor morphologies and undesired electrical properties of the thin films. A low-temperature vapor-assisted solution process (LT-VASP) has been employed as a novel kinetically controlled gas–solid reaction film fabrication method to prepare lead-free CH3NH3SnI3 thin films. We show that the solid SnI2 substrate temperature is the key parameter in achieving perovskite films with high surface coverage and excellent uniformity. The resulting high-quality CH3NH3SnI3 films allow the successful fabrication of solar cells with drastically improved reproducibility, reaching an efficiency of 1.86%. Furthermore, our Kelvinmore » probe studies show the VASP films have a doping level lower than that of films prepared from the conventional one-step method, effectively lowering the film conductivity. Above all, with (LT)-VASP, the short-circuit behavior often obtained from the conventional one-step-fabricated Sn-based perovskite devices has been overcome. This study facilitates the path to more successful Sn-perovskite photovoltaic research.« less

Achieving Excellence in Our Schools...by Taking Lessons from America's Best-Run Companies.

ERIC Educational Resources Information Center

Lewis, James, Jr.

This book, based on the author's theory of "success emulation," presents 12 detailed lessons for school districts in adopting principles and practices that have worked for the best-run companies in America. Each lesson presents a step-by-step practical guide for achieving excellence in education by explaining what businesses are doing to…

Los Angeles County Steps to Excellence Project: QRS Profile. The Child Care Quality Rating System (QRS) Assessment

ERIC Educational Resources Information Center

Child Trends, 2010

2010-01-01

This paper presents a profile of Los Angeles County's Steps to Excellence Project prepared as part of the Child Care Quality Rating System (QRS) Assessment Study. The profile consists of several sections and their corresponding descriptions including: (1) Program Information; (2) Rating Details; (3) Quality Indicators for Center-Based Programs;…

New Science Opportunities on COSMIC-2/FORMOSAT-7

NASA Technical Reports Server (NTRS)

Mannucci, Anthony J.; Meehan, Thomas K.; Lowe, Stephen T.; Ao, Chi O; Franklin, Garth; Pi, Xiaoqing; Young, Lawrence E.; Kuo, Ying-Hwa (Bill); Schreiner, William S.

2013-01-01

COSMIC-2 Polar (second launch) is an excellent opportunity to extend SSAEM capabilities to global coverage. Enhanced ionospheric remote sensing via oceanic TEC and DORIS. Science: lower-upper atmosphere coupling. Additional payloads are being considered by NSPO/Taiwan.

High efficient perovskite solar cell material CH3NH3PbI3: Synthesis of films and their characterization

NASA Astrophysics Data System (ADS)

Bera, Amrita Mandal; Wargulski, Dan Ralf; Unold, Thomas

2018-04-01

Hybrid organometal perovskites have been emerged as promising solar cell material and have exhibited solar cell efficiency more than 20%. Thin films of Methylammonium lead iodide CH3NH3PbI3 perovskite materials have been synthesized by two different (one step and two steps) methods and their morphological properties have been studied by scanning electron microscopy and optical microscope imaging. The morphology of the perovskite layer is one of the most important parameters which affect solar cell efficiency. The morphology of the films revealed that two steps method provides better surface coverage than the one step method. However, the grain sizes were smaller in case of two steps method. The films prepared by two steps methods on different substrates revealed that the grain size also depend on the substrate where an increase of the grain size was found from glass substrate to FTO with TiO2 blocking layer to FTO without any change in the surface coverage area. Present study reveals that an improved quality of films can be obtained by two steps method by an optimization of synthesis processes.

5 CFR 531.503 - Purpose of quality step increases.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Purpose of quality step increases. 531... PAY UNDER THE GENERAL SCHEDULE Quality Step Increases § 531.503 Purpose of quality step increases. The purpose of quality step increases is to provide appropriate incentives and recognition for excellence in...

SU-F-J-66: Anatomy Deformation Based Comparison Between One-Step and Two-Step Optimization for Online ART

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feng, Z; Yu, G; Qin, S

Purpose: This study investigated that how the quality of adapted plan was affected by inter-fractional anatomy deformation by using one-step and two-step optimization for on line adaptive radiotherapy (ART) procedure. Methods: 10 lung carcinoma patients were chosen randomly to produce IMRT plan by one-step and two-step algorithms respectively, and the prescribed dose was set as 60 Gy on the planning target volume (PTV) for all patients. To simulate inter-fractional target deformation, four specific cases were created by systematic anatomy variation; including target superior shift 0.5 cm, 0.3cm contraction, 0.3 cm expansion and 45-degree rotation. Based on these four anatomy deformation,more » adapted plan, regenerated plan and non-adapted plan were created to evaluate quality of adaptation. Adapted plans were generated automatically by using one-step and two-step algorithms respectively to optimize original plans, and regenerated plans were manually created by experience physicists. Non-adapted plans were produced by recalculating the dose distribution based on corresponding original plans. The deviations among these three plans were statistically analyzed by paired T-test. Results: In PTV superior shift case, adapted plans had significantly better PTV coverage by using two-step algorithm compared with one-step one, and meanwhile there was a significant difference of V95 by comparison with adapted and non-adapted plans (p=0.0025). In target contraction deformation, with almost same PTV coverage, the total lung received lower dose using one-step algorithm than two-step algorithm (p=0.0143,0.0126 for V20, Dmean respectively). In other two deformation cases, there were no significant differences observed by both two optimized algorithms. Conclusion: In geometry deformation such as target contraction, with comparable PTV coverage, one-step algorithm gave better OAR sparing than two-step algorithm. Reversely, the adaptation by using two-step algorithm had higher efficiency and accuracy as target occurred position displacement. We want to thank Dr. Lei Xing and Dr. Yong Yang in the Stanford University School of Medicine for this work. This work was jointly supported by NSFC (61471226), Natural Science Foundation for Distinguished Young Scholars of Shandong Province (JQ201516), and China Postdoctoral Science Foundation (2015T80739, 2014M551949).« less

Why small business is sick over health costs.

PubMed

Carpenter, Dave

2003-11-01

Overwhelmed by the cost of paying for health coverage, many small employers see their only options as cutting coverage, cutting staff or going out of business--any of which is bad news for communities and hospitals. There are creative alternatives to traditional insurance, and experts advise small businesses to explore those before taking drastic steps.

Variation in Prescription Drug Coverage for Triptans: Analysis of Insurance Formularies.

PubMed

Minen, Mia T; Lindberg, Kate; Langford, Aisha; Loder, Elizabeth

2017-09-01

To analyze triptan coverage by insurers to examine (1) possible disparities in coverage for different formulations (oral, intranasal, etc) and (2) quantity limits and stepped care requirements to obtain triptans. Triptans are FDA approved migraine abortive medications. Patients frequently state that they have difficulty accessing triptans prescribed to them. We searched the 2015 drug formularies of commercial and government health insurers providing coverage in NY State. We created a spreadsheet with all of the commercially available triptans and included information about covered formulations, tier numbers and quantity limits for each drug. We then calculated the number of listed plans that cover or do not cover each triptan or triptan formulation, the total number of medications not covered by an insurance provided across all of its plans, as well as the percentage of plans offered by individual companies and across all companies that covered each drug. We also calculated the number and proportion of plans that imposed quantity limits or step therapy for each drug. Of the 100 formularies searched, generic sumatriptan (all formulations), naratriptan, and zolmitriptan tablets were covered by all plans, and rizatriptan tablets and ODTs were covered by 98% of plans. Brand triptans were less likely to be covered: 4/36 Medicaid plans covered brand triptans. Commercial insurers were more likely to cover brand triptans. All plans imposed quantity limits on 1+ triptan formulations, with >80% imposing quantity limits on 14/19 formulations studied. Almost all plans used tiers for cost allocation for different medications. Generic triptans were almost always in Tier 1. Brand triptans were most commonly in Tier 3. Approximately 40% of brand triptans required step therapy, compared with 11% of generic triptans. There are substantial variations in coverage and quantity limits and a high degree of complexity in triptan coverage for both government and commercial plans. © 2017 American Headache Society.

ExcelAutomat: a tool for systematic processing of files as applied to quantum chemical calculations

NASA Astrophysics Data System (ADS)

Laloo, Jalal Z. A.; Laloo, Nassirah; Rhyman, Lydia; Ramasami, Ponnadurai

2017-07-01

The processing of the input and output files of quantum chemical calculations often necessitates a spreadsheet as a key component of the workflow. Spreadsheet packages with a built-in programming language editor can automate the steps involved and thus provide a direct link between processing files and the spreadsheet. This helps to reduce user-interventions as well as the need to switch between different programs to carry out each step. The ExcelAutomat tool is the implementation of this method in Microsoft Excel (MS Excel) using the default Visual Basic for Application (VBA) programming language. The code in ExcelAutomat was adapted to work with the platform-independent open-source LibreOffice Calc, which also supports VBA. ExcelAutomat provides an interface through the spreadsheet to automate repetitive tasks such as merging input files, splitting, parsing and compiling data from output files, and generation of unique filenames. Selected extracted parameters can be retrieved as variables which can be included in custom codes for a tailored approach. ExcelAutomat works with Gaussian files and is adapted for use with other computational packages including the non-commercial GAMESS. ExcelAutomat is available as a downloadable MS Excel workbook or as a LibreOffice workbook.

ExcelAutomat: a tool for systematic processing of files as applied to quantum chemical calculations.

PubMed

Laloo, Jalal Z A; Laloo, Nassirah; Rhyman, Lydia; Ramasami, Ponnadurai

2017-07-01

The processing of the input and output files of quantum chemical calculations often necessitates a spreadsheet as a key component of the workflow. Spreadsheet packages with a built-in programming language editor can automate the steps involved and thus provide a direct link between processing files and the spreadsheet. This helps to reduce user-interventions as well as the need to switch between different programs to carry out each step. The ExcelAutomat tool is the implementation of this method in Microsoft Excel (MS Excel) using the default Visual Basic for Application (VBA) programming language. The code in ExcelAutomat was adapted to work with the platform-independent open-source LibreOffice Calc, which also supports VBA. ExcelAutomat provides an interface through the spreadsheet to automate repetitive tasks such as merging input files, splitting, parsing and compiling data from output files, and generation of unique filenames. Selected extracted parameters can be retrieved as variables which can be included in custom codes for a tailored approach. ExcelAutomat works with Gaussian files and is adapted for use with other computational packages including the non-commercial GAMESS. ExcelAutomat is available as a downloadable MS Excel workbook or as a LibreOffice workbook.

Silicon Nitride Deposition for Flexible Organic Electronic Devices by VHF (162 MHz)-PECVD Using a Multi-Tile Push-Pull Plasma Source.

PubMed

Kim, Ki Seok; Kim, Ki Hyun; Ji, You Jin; Park, Jin Woo; Shin, Jae Hee; Ellingboe, Albert Rogers; Yeom, Geun Young

2017-10-19

Depositing a barrier film for moisture protection without damage at a low temperature is one of the most important steps for organic-based electronic devices. In this study, the authors investigated depositing thin, high-quality SiN x film on organic-based electronic devices, specifically, very high-frequency (162 MHz) plasma-enhanced chemical vapor deposition (VHF-PECVD) using a multi-tile push-pull plasma source with a gas mixture of NH 3 /SiH 4 at a low temperature of 80 °C. The thin deposited SiN x film exhibited excellent properties in the stoichiometry, chemical bonding, stress, and step coverage. Thin film quality and plasma damage were investigated by the water vapor transmission rate (WVTR) and by electrical characteristics of organic light-emitting diode (OLED) devices deposited with SiN x , respectively. The thin deposited SiN x film exhibited a low WVTR of 4.39 × 10 -4  g (m 2 · day) -1 for a single thin (430 nm thick) film SiN x and the electrical characteristics of OLED devices before and after the thin SiN x film deposition on the devices did not change, which indicated no electrical damage during the deposition of SiN x on the OLED device.

So near, yet so far: tobacco dependence treatment for pregnant women.

PubMed

Barker, Dianne; Orleans, Tracy; Halpin, Helen; Barry, Matthew

2004-04-01

Almost one-half million babies in the United States are born yearly to women who report smoking while pregnant. Almost all of these pregnant women have access to prenatal care, through federally financed health clinics, state and county health programs, or private providers. However, many pregnant smokers are unlikely to receive any type of counseling or assistance to help them stop smoking--despite the availability of evidence-based treatment and the considerable return on investment. This article recommends four next steps to ensure that tobacco dependence treatment is available for all pregnant women. These steps are (a). expanding Medicaid coverage for, and promotion of, effective counseling services for pregnant smokers, (b). improving health care systems by building the capacity of prenatal providers and health care systems to deliver effective treatments, (c). encouraging purchasers of private and public health benefit packages to demand coverage for, and promotion of, effective counseling services for pregnant smokers, and (d). redirecting state resources to ensure a statewide system of care for pregnant smokers. Implementation of these steps requires leadership, diligence, and action by the public health community--as well as ongoing monitoring to assess progress in improving coverage, capacity, and coordination.

Physiologically based pharmacokinetic modeling using microsoft excel and visual basic for applications.

PubMed

Marino, Dale J

2005-01-01

Abstract Physiologically based pharmacokinetic (PBPK) models are mathematical descriptions depicting the relationship between external exposure and internal dose. These models have found great utility for interspecies extrapolation. However, specialized computer software packages, which are not widely distributed, have typically been used for model development and utilization. A few physiological models have been reported using more widely available software packages (e.g., Microsoft Excel), but these tend to include less complex processes and dose metrics. To ascertain the capability of Microsoft Excel and Visual Basis for Applications (VBA) for PBPK modeling, models for styrene, vinyl chloride, and methylene chloride were coded in Advanced Continuous Simulation Language (ACSL), Excel, and VBA, and simulation results were compared. For styrene, differences between ACSL and Excel or VBA compartment concentrations and rates of change were less than +/-7.5E-10 using the same numerical integration technique and time step. Differences using VBA fixed step or ACSL Gear's methods were generally <1.00E-03, although larger differences involving very small values were noted after exposure transitions. For vinyl chloride and methylene chloride, Excel and VBA PBPK model dose metrics differed by no more than -0.013% or -0.23%, respectively, from ACSL results. These differences are likely attributable to different step sizes rather than different numerical integration techniques. These results indicate that Microsoft Excel and VBA can be useful tools for utilizing PBPK models, and given the availability of these software programs, it is hoped that this effort will help facilitate the use and investigation of PBPK modeling.

In situ synthesis of water-soluble magnetic graphitic carbon nitride photocatalyst and its synergistic catalytic performance.

PubMed

Zhang, Shouwei; Li, Jiaxing; Zeng, Meiyi; Zhao, Guixia; Xu, Jinzhang; Hu, Wenping; Wang, Xiangke

2013-12-11

Water-soluble magnetic-functionalized graphitic carbon nitride (g-C3N4) composites were synthesized successfully by in situ decorating spinel ZnFe2O4 nanoparticles on g-C3N4 sheets (CN-ZnFe) through a one-step solvothermal method. The magnetic properties of CN-ZnFe can be effectively controlled via tuning the coverage density and the size of ZnFe2O4 nanoparticles. The results indicate that the CN-ZnFe exhibits excellent photocatalytic efficiency for methyl orange (MO) and fast separation from aqueous solution by magnet. Interestingly, the catalytic performance of the CN-ZnFe is strongly dependent on the loading of ZnFe2O4. The optimum activity of 160CN-ZnFe photocatalyst is almost 6.4 and 5.6 times higher than those of individual g-C3N4 and ZnFe2O4 toward MO degradation, respectively. By carefully investigating the influence factors, a possible mechanism is proposed and it is believed that the synergistic effect of g-C3N4 and ZnFe2O4, the smaller particle size, and the high solubility in water contribute to the effective electron-hole pairs separation and excellent photocatalytic efficiency. This work could provide new insights that g-C3N4 sheets function as good support to develop highly efficient g-C3N4-based magnetic photocatalysts in environmental pollution cleanup.

Three-Dimensional Host Bone Coverage in Total Hip Arthroplasty for Crowe Types II and III Developmental Dysplasia of the Hip.

PubMed

Xu, Jiawei; Qu, Xinhua; Li, Huiwu; Mao, Yuanqing; Yu, Degang; Zhu, Zhenan

2017-04-01

Recommendations for minimum cup coverage based on anteroposterior radiographs are widely used as an intraoperative guide in total hip arthroplasty for patients with developmental dysplasia of the hip. The purpose of this study was to examine the validity of two-dimensional (2D) measurement of coverage with three-dimensional (3D) coverage and to identify parameters for determining the 3D coverage during surgery. We developed a technique to accurately reproduce the intraoperative anatomic geometry of the dysplastic acetabulum and measure the 3D cup coverage postoperatively. With this technique, we retrospectively analyzed the difference and correlation between 2D and 3D measurements of native bone coverage in 35 patients (45 hips) with Crowe II or III DDH. Linear regression analysis was performed to examine the intraoperative parameters related to coverage. The mean follow-up period was 7.64 years (range, 6.1-9.5 years). There was a significant difference and a fair correlation between 2D and 3D measurements. The 2D measurement underestimated the 3D cup coverage by approximately 13%. An excellent linear relationship was noted between the 3D coverage/uncoverage and the height of the uncovered portion (R 2  = 0.8440, P < .0001). There was no case of loosening or revision during the follow-up. Current minimum cup coverage recommendations based on 2D radiograph measurements should not be used as a direct intraoperative guide. The height of the uncovered portion is a useful parameter to determine the 3D coverage during surgery. Copyright © 2016 Elsevier Inc. All rights reserved.

GenAlEx 6.5: genetic analysis in Excel. Population genetic software for teaching and research--an update.

PubMed

Peakall, Rod; Smouse, Peter E

2012-10-01

GenAlEx: Genetic Analysis in Excel is a cross-platform package for population genetic analyses that runs within Microsoft Excel. GenAlEx offers analysis of diploid codominant, haploid and binary genetic loci and DNA sequences. Both frequency-based (F-statistics, heterozygosity, HWE, population assignment, relatedness) and distance-based (AMOVA, PCoA, Mantel tests, multivariate spatial autocorrelation) analyses are provided. New features include calculation of new estimators of population structure: G'(ST), G''(ST), Jost's D(est) and F'(ST) through AMOVA, Shannon Information analysis, linkage disequilibrium analysis for biallelic data and novel heterogeneity tests for spatial autocorrelation analysis. Export to more than 30 other data formats is provided. Teaching tutorials and expanded step-by-step output options are included. The comprehensive guide has been fully revised. GenAlEx is written in VBA and provided as a Microsoft Excel Add-in (compatible with Excel 2003, 2007, 2010 on PC; Excel 2004, 2011 on Macintosh). GenAlEx, and supporting documentation and tutorials are freely available at: http://biology.anu.edu.au/GenAlEx. rod.peakall@anu.edu.au.

A sub-atmospheric chemical vapor deposition process for deposition of oxide liner in high aspect ratio through silicon vias.

PubMed

Lisker, Marco; Marschmeyer, Steffen; Kaynak, Mehmet; Tekin, Ibrahim

2011-09-01

The formation of a Through Silicon Via (TSV) includes a deep Si trench etching and the formation of an insulating layer along the high-aspect-ratio trench and the filling of a conductive material into the via hole. The isolation of the filling conductor from the silicon substrate becomes more important for higher frequencies due to the high coupling of the signal to the silicon. The importance of the oxide thickness on the via wall isolation can be verified using electromagnetic field simulators. To satisfy the needs on the Silicon dioxide deposition, a sub-atmospheric chemical vapor deposition (SA-CVD) process has been developed to deposit an isolation oxide to the walls of deep silicon trenches. The technique provides excellent step coverage of the 100 microm depth silicon trenches with the high aspect ratio of 20 and more. The developed technique allows covering the deep silicon trenches by oxide and makes the high isolation of TSVs from silicon substrate feasible which is the key factor for the performance of TSVs for mm-wave 3D packaging.

Full coverage of perovskite layer onto ZnO nanorods via a modified sequential two-step deposition method for efficiency enhancement in perovskite solar cells

NASA Astrophysics Data System (ADS)

Ruankham, Pipat; Wongratanaphisan, Duangmanee; Gardchareon, Atcharawon; Phadungdhitidhada, Surachet; Choopun, Supab; Sagawa, Takashi

2017-07-01

Full coverage of perovskite layer onto ZnO nanorod substrates with less pinholes is crucial for achieving high-efficiency perovskite solar cells. In this work, a two-step sequential deposition method is modified to achieve an appropriate property of perovskite (MAPbI3) film. Surface treatment of perovskite layer and its precursor have been systematically performed and their morphologies have been investigated. By pre-wetting of lead iodide (PbI2) and letting it dry before reacting with methylammonium iodide (MAI) provide better coverage of perovskite film onto ZnO nanorod substrate than one without any treatment. An additional MAI deposition followed with toluene drop-casting technique on the perovskite film is also found to increase the coverage and enhance the transformation of PbI2 to MAPbI3. These lead to longer charge carrier lifetime, resulting in an enhanced power conversion efficiency (PCE) from 1.21% to 3.05%. The modified method could been applied to a complex ZnO nanorods/TiO2 nanoparticles substrate. The enhancement in PCE to 3.41% is observed. These imply that our introduced method provides a simple way to obtain the full coverage and better transformation to MAPbI3 phase for enhancement in performances of perovskite solar cells.

Fast Conceptual Cost Estimating of Aerospace Projects Using Historical Information

NASA Technical Reports Server (NTRS)

Butts, Glenn

2007-01-01

Accurate estimates can be created in less than a minute by applying powerful techniques and algorithms to create an Excel-based parametric cost model. In five easy steps you will learn how to normalize your company 's historical cost data to the new project parameters. This paper provides a complete, easy-to-understand, step by step how-to guide. Such a guide does not seem to currently exist. Over 2,000 hours of research, data collection, and trial and error, and thousands of lines of Excel Visual Basic Application (VBA) code were invested in developing these methods. While VBA is not required to use this information, it increases the power and aesthetics of the model. Implementing all of the steps described, while not required, will increase the accuracy of the results.

Design rules for vertical interconnections by reverse offset printing

NASA Astrophysics Data System (ADS)

Kusaka, Yasuyuki; Kanazawa, Shusuke; Ushijima, Hirobumi

2018-03-01

Formation of vertical interconnections by reverse offset printing was investigated, particularly focusing on the transfer step, in which an ink pattern is transferred from a polydimethylsiloxane (PDMS) sheet for the step coverage of contact holes. We systematically examined the coverage of contact holes made of a tapered photoresist layer by varying the hole size, the hole depth, PDMS elasticity, PDMS thickness, printing speed, and printing indentation depth. Successful ink filling was achieved when the PDMS was softer, and the optimal PDMS thickness varied depending on the size of the contact holes. This behaviour is related to the bell-type uplift deformation of incompressible PDMS, which can be described by contact mechanics numerical simulations. Based on direct observation of PDMS/resist-hole contact behaviour, the step coverage of contact holes typically involves two steps of contact area growth: (i) the PDMS first touches the bottom of the holes and then (ii) the contact area gradually and radially widens toward the tapered sidewall. From an engineering perspective, it is pointed out that mechanical synchronisation mismatch in the roll-to-sheet type printing invokes the cracking of ink layers at the edges of contact holes. According to the above design rule, ink filling into a contact hole with thickness of 2.5 µm and radius of 10 µm was achieved. Contact chain patterns with 1386 points of vertical interconnections with the square hole size of up to 10 µm successfully demonstrated the validity of the technique presented herein.

Human papillomavirus (HPV) vaccine coverage achievements in low and middle-income countries 2007-2016.

PubMed

Gallagher, Katherine E; Howard, Natasha; Kabakama, Severin; Mounier-Jack, Sandra; Burchett, Helen E D; LaMontagne, D Scott; Watson-Jones, Deborah

2017-12-01

Since 2007, HPV vaccine has been available to low and middle income countries (LAMIC) for small-scale 'demonstration projects', or national programmes. We analysed coverage achieved in HPV vaccine demonstration projects and national programmes that had completed at least 6 months of implementation between January 2007-2016. A mapping exercise identified 45 LAMICs with HPV vaccine delivery experience. Estimates of coverage and factors influencing coverage were obtained from 56 key informant interviews, a systematic published literature search of 5 databases that identified 61 relevant full texts and 188 solicited unpublished documents, including coverage surveys. Coverage achievements were analysed descriptively against country or project/programme characteristics. Heterogeneity in data, funder requirements, and project/programme design precluded multivariate analysis. Estimates of uptake, schedule completion rates and/or final dose coverage were available from 41 of 45 LAMICs included in the study. Only 17 estimates from 13 countries were from coverage surveys, most were administrative data. Final dose coverage estimates were all over 50% with most between 70% and 90%, and showed no trend over time. The majority of delivery strategies included schools as a vaccination venue. In countries with school enrolment rates below 90%, inclusion of strategies to reach out-of-school girls contributed to obtaining high coverage compared to school-only strategies. There was no correlation between final dose coverage and estimated recurrent financial costs of delivery from cost analyses. Coverage achieved during joint delivery of HPV vaccine combined with another intervention was variable with little/no evaluation of the correlates of success. This is the most comprehensive descriptive analysis of HPV vaccine coverage in LAMICs to date. It is possible to deliver HPV vaccine with excellent coverage in LAMICs. Further good quality data are needed from health facility based delivery strategies and national programmes to aid policymakers to effectively and sustainably scale-up HPV vaccination. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

Robust high-performance nanoliter-volume single-cell multiple displacement amplification on planar substrates.

PubMed

Leung, Kaston; Klaus, Anders; Lin, Bill K; Laks, Emma; Biele, Justina; Lai, Daniel; Bashashati, Ali; Huang, Yi-Fei; Aniba, Radhouane; Moksa, Michelle; Steif, Adi; Mes-Masson, Anne-Marie; Hirst, Martin; Shah, Sohrab P; Aparicio, Samuel; Hansen, Carl L

2016-07-26

The genomes of large numbers of single cells must be sequenced to further understanding of the biological significance of genomic heterogeneity in complex systems. Whole genome amplification (WGA) of single cells is generally the first step in such studies, but is prone to nonuniformity that can compromise genomic measurement accuracy. Despite recent advances, robust performance in high-throughput single-cell WGA remains elusive. Here, we introduce droplet multiple displacement amplification (MDA), a method that uses commercially available liquid dispensing to perform high-throughput single-cell MDA in nanoliter volumes. The performance of droplet MDA is characterized using a large dataset of 129 normal diploid cells, and is shown to exceed previously reported single-cell WGA methods in amplification uniformity, genome coverage, and/or robustness. We achieve up to 80% coverage of a single-cell genome at 5× sequencing depth, and demonstrate excellent single-nucleotide variant (SNV) detection using targeted sequencing of droplet MDA product to achieve a median allelic dropout of 15%, and using whole genome sequencing to achieve false and true positive rates of 9.66 × 10(-6) and 68.8%, respectively, in a G1-phase cell. We further show that droplet MDA allows for the detection of copy number variants (CNVs) as small as 30 kb in single cells of an ovarian cancer cell line and as small as 9 Mb in two high-grade serous ovarian cancer samples using only 0.02× depth. Droplet MDA provides an accessible and scalable method for performing robust and accurate CNV and SNV measurements on large numbers of single cells.

a Fast and Flexible Method for Meta-Map Building for Icp Based Slam

NASA Astrophysics Data System (ADS)

Kurian, A.; Morin, K. W.

2016-06-01

Recent developments in LiDAR sensors make mobile mapping fast and cost effective. These sensors generate a large amount of data which in turn improves the coverage and details of the map. Due to the limited range of the sensor, one has to collect a series of scans to build the entire map of the environment. If we have good GNSS coverage, building a map is a well addressed problem. But in an indoor environment, we have limited GNSS reception and an inertial solution, if available, can quickly diverge. In such situations, simultaneous localization and mapping (SLAM) is used to generate a navigation solution and map concurrently. SLAM using point clouds possesses a number of computational challenges even with modern hardware due to the shear amount of data. In this paper, we propose two strategies for minimizing the cost of computation and storage when a 3D point cloud is used for navigation and real-time map building. We have used the 3D point cloud generated by Leica Geosystems's Pegasus Backpack which is equipped with Velodyne VLP-16 LiDARs scanners. To improve the speed of the conventional iterative closest point (ICP) algorithm, we propose a point cloud sub-sampling strategy which does not throw away any key features and yet significantly reduces the number of points that needs to be processed and stored. In order to speed up the correspondence finding step, a dual kd-tree and circular buffer architecture is proposed. We have shown that the proposed method can run in real time and has excellent navigation accuracy characteristics.

Health promotion and patient education benefits for employees.

PubMed

Mullen, P D

1988-01-01

One step that employers can take to assure that employees receive such education services is pursuing coverage of education as a separate service. For some time now, insurers have shown interest in patient education services (15-17, 61), but patient education "integral to care" is typically covered only as a part of the "per diem" in the case of hospitals or as part of the visit fee in the case of outpatient visits. Education for patients with diabetes is being covered experimentally as a separate service in at least 17 states. Physicians whose practice is composed largely of "cognitive services" rather than "procedures" are also interested in education as a reimbursable service. The same arguments as described in relation to coverage of risk reduction services generally apply to this case. Education programs for employees who are under medical care can improve their adherence to the recommended regimen and hence can improve the effectiveness of care. Education and counseling prior to surgical and other stressful procedures decrease stress and the need for pain medications, and they can shorten the length of hospital stays. Education is an important component of programs to substitute home care for hospital care or expensive outpatient care. Currently, however, a patient cannot rely on usual providers of medical care to offer adequate education. Reimbursement for patient education on a selected, experimental basis is probably warranted for chronic conditions requiring complex adjustments and regimens. Cases of asthma where there is a history of hospitalization or emergency room visits is an excellent possibility. The experience of covering diabetes education should be monitored to help resolve the debate.

A bill to amend the Internal Revenue Code of 1986 to provide for the treatment of Department of Defense health coverage as minimal essential coverage.

THOMAS, 111th Congress

Sen. Webb, Jim [D-VA

2010-03-22

Senate - 03/22/2010 Read twice and referred to the Committee on Finance. (All Actions) Notes: For further action, see H.R.4887, which became Public Law 111-159 on 4/26/2010. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A mystery caller evaluation of Medicaid staff responses about state coverage of abortion care.

PubMed

Dennis, Amanda; Blanchard, Kelly

2012-03-01

The Hyde Amendment prohibits federal Medicaid funding for abortion except when a woman is seeking an abortion for a pregnancy that is the result of rape or incest, or that threatens her life. We investigated how Medicaid staff in 17 states responded to inquiries about coverage for abortion in the few circumstances that qualify for federal Medicaid funding. Using a mystery caller approach, we surveyed Medicaid staff about the availability of abortion coverage, the process for obtaining coverage, and the associated costs for an abortion in circumstances of rape and life endangerment in five states where Medicaid coverage should be available to cover most abortions and in 12 states with restrictions on the circumstances under which Medicaid funding can be used for abortion. We were able to complete 82% of surveys. Medicaid staff definitively provided information about the availability of coverage that was consistent with state policies in 64% of surveys. However, 52% of staff reported that coverage could be difficult to obtain and that rigorous documentation of the circumstances of the abortion was required. Information about copays for abortion was given in 78% of surveys. We subjectively rated the caller's experience with Medicaid staff as excellent during 32% of the surveys, adequate in 61% of surveys, and poor in 7% of surveys. Medicaid staff provided inconsistent information that was often discouraging of women seeking abortion coverage, suggesting that women may have difficulties obtaining accurate information about Medicaid coverage of abortion, which may deter access to care. Copyright © 2012 Jacobs Institute of Women

From medical invention to clinical practice: the reimbursement challenge facing new device procedures and technology--part 2: coverage.

PubMed

Raab, G Gregory; Parr, David H

2006-10-01

This paper, the second of 3 that discuss the reimbursement challenges facing new medical device technology in various issues of this journal, explains the key aspects of coverage that affect the adoption of medical devices. The process Medicare uses to make coverage determinations has become more timely and open over the past several years, but it still lacks the predictability that product innovators prefer. The continued uncertainty surrounding evidence requirements undermines the predictability needed for optimal product planning and innovation. Recent steps taken by the Centers for Medicare and Medicaid Services to provide coverage in return for evidence development should provide patients with access to promising new technologies and procedures while generating important evidence concerning their effectiveness.

Soft Landing of Bare Nanoparticles with Controlled Size, Composition, and Morphology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Grant E.; Colby, Robert J.; Laskin, Julia

2015-01-01

A kinetically-limited physical synthesis method based on magnetron sputtering and gas aggregation has been coupled with size-selection and ion soft landing to prepare bare metal nanoparticles on surfaces with controlled coverage, size, composition, and morphology. Employing atomic force microscopy (AFM) and scanning electron microscopy (SEM), it is demonstrated that the size and coverage of bare nanoparticles soft landed onto flat glassy carbon and silicon as well as stepped graphite surfaces may be controlled through size-selection with a quadrupole mass filter and the length of deposition, respectively. The bare nanoparticles are observed with AFM to bind randomly to the flat glassymore » carbon surface when soft landed at relatively low coverage (1012 ions). In contrast, on stepped graphite surfaces at intermediate coverage (1013 ions) the soft landed nanoparticles are shown to bind preferentially along step edges forming extended linear chains of particles. At the highest coverage (5 x 1013 ions) examined in this study the nanoparticles are demonstrated with both AFM and SEM to form a continuous film on flat glassy carbon and silicon surfaces. On a graphite surface with defects, however, it is shown with SEM that the presence of localized surface imperfections results in agglomeration of nanoparticles onto these features and the formation of neighboring depletion zones that are devoid of particles. Employing high resolution scanning transmission electron microscopy in the high angular annular dark field imaging mode (STEM-HAADF) and electron energy loss spectroscopy (EELS) it is demonstrated that the magnetron sputtering/gas aggregation synthesis technique produces single metal particles with controlled morphology as well as bimetallic alloy nanoparticles with clearly defined core-shell structure. Therefore, this kinetically-limited physical synthesis technique, when combined with ion soft landing, is a versatile complementary method for preparing a wide range of bare supported nanoparticles with selected properties that are free of the solvent, organic capping agents, and residual reactants present with nanoparticles synthesized in solution.« less

GenAlEx 6.5: genetic analysis in Excel. Population genetic software for teaching and research—an update

PubMed Central

Peakall, Rod; Smouse, Peter E.

2012-01-01

Summary: GenAlEx: Genetic Analysis in Excel is a cross-platform package for population genetic analyses that runs within Microsoft Excel. GenAlEx offers analysis of diploid codominant, haploid and binary genetic loci and DNA sequences. Both frequency-based (F-statistics, heterozygosity, HWE, population assignment, relatedness) and distance-based (AMOVA, PCoA, Mantel tests, multivariate spatial autocorrelation) analyses are provided. New features include calculation of new estimators of population structure: G′ST, G′′ST, Jost’s Dest and F′ST through AMOVA, Shannon Information analysis, linkage disequilibrium analysis for biallelic data and novel heterogeneity tests for spatial autocorrelation analysis. Export to more than 30 other data formats is provided. Teaching tutorials and expanded step-by-step output options are included. The comprehensive guide has been fully revised. Availability and implementation: GenAlEx is written in VBA and provided as a Microsoft Excel Add-in (compatible with Excel 2003, 2007, 2010 on PC; Excel 2004, 2011 on Macintosh). GenAlEx, and supporting documentation and tutorials are freely available at: http://biology.anu.edu.au/GenAlEx. Contact: rod.peakall@anu.edu.au PMID:22820204

Clothing Protection from Ultraviolet Radiation: A New Method for Assessment.

PubMed

Gage, Ryan; Leung, William; Stanley, James; Reeder, Anthony; Barr, Michelle; Chambers, Tim; Smith, Moira; Signal, Louise

2017-11-01

Clothing modifies ultraviolet radiation (UVR) exposure from the sun and has an impact on skin cancer risk and the endogenous synthesis of vitamin D. There is no standardized method available for assessing body surface area (BSA) covered by clothing, which limits generalizability between study findings. We calculated the body cover provided by 38 clothing items using diagrams of BSA, adjusting the values to account for differences in BSA by age. Diagrams displaying each clothing item were developed and incorporated into a coverage assessment procedure (CAP). Five assessors used the CAP and Lund & Browder chart, an existing method for estimating BSA, to calculate the clothing coverage of an image sample of 100 schoolchildren. Values of clothing coverage, inter-rater reliability and assessment time were compared between CAP and Lund & Browder methods. Both methods had excellent inter-rater reliability (>0.90) and returned comparable results, although the CAP method was significantly faster in determining a person's clothing coverage. On balance, the CAP method appears to be a feasible method for calculating clothing coverage. Its use could improve comparability between sun-safety studies and aid in quantifying the health effects of UVR exposure. © 2017 The American Society of Photobiology.

Results of step-cut medial malleolar osteotomy.

PubMed

Thordarson, David B; Kaku, Shawn K

2006-12-01

Treatment of certain complex ankle pathology, such as a talar body fracture or osteochondral lesion requiring grafting, can necessitate medial malleolar osteotomy for adequate operative exposure. This paper evaluates the step-cut medial malleolar osteotomy for exposure of the ankle joint. Fourteen patients with intra-articular pathology, including talar body fractures or osteochondral lesions necessitating extensive intra-articular exposure had step-cut malleolar osteotomy. The average age of the patients was 37 (range 20-90) years, and the average followup was 8 months. All 14 patients had an uncomplicated intraoperative course, with excellent exposure of the ankle joint. All patients had prompt healing of the osteotomy by 6 weeks after surgery without loss of reduction. None of the patients had pain at the osteotomy site. Step-cut medial malleolar osteotomy is an excellent, reproducible method for extensive exposure of the talar dome.

Relative plan robustness of step-and-shoot vs rotational intensity–modulated radiotherapy on repeat computed tomographic simulation for weight loss in head and neck cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomson, David J.; The University of Manchester, Manchester Academic Health Science Centre, Institute of Cancer Sciences, Manchester; Beasley, William J.

Introduction: Interfractional anatomical alterations may have a differential effect on the dose delivered by step-and-shoot intensity-modulated radiotherapy (IMRT) and volumetric-modulated arc therapy (VMAT). The increased degrees of freedom afforded by rotational delivery may increase plan robustness (measured by change in target volume coverage and doses to organs at risk [OARs]). However, this has not been evaluated for head and neck cancer. Materials and methods: A total of 10 patients who required repeat computed tomography (CT) simulation and replanning during head and neck IMRT were included. Step-and-shoot IMRT and VMAT plans were generated from the original planning scan. The initial andmore » second CT simulation scans were fused and targets/OAR contours transferred, reviewed, and modified. The plans were applied to the second CT scan and doses recalculated without repeat optimization. Differences between step-and-shoot IMRT and VMAT for change in target volume coverage and doses to OARs between first and second CT scans were compared by Wilcoxon signed rank test. Results: There were clinically relevant dosimetric changes between the first and the second CT scans for both the techniques (reduction in mean D{sub 95%} for PTV2 and PTV3, D{sub min} for CTV2 and CTV3, and increased mean doses to the parotid glands). However, there were no significant differences between step-and-shoot IMRT and VMAT for change in any target coverage parameter (including D{sub 95%} for PTV2 and PTV3 and D{sub min} for CTV2 and CTV3) or dose to any OARs (including parotid glands) between the first and the second CT scans. Conclusions: For patients with head and neck cancer who required replanning mainly due to weight loss, there were no significant differences in plan robustness between step-and-shoot IMRT and VMAT. This information is useful with increased clinical adoption of VMAT.« less

Iranian Special Library Standards.

ERIC Educational Resources Information Center

Harvey, John F.

The purposes of these standards are: (1) to suggest the steps necessary for the establishment of special libraries; (2) for those recently established, to suggest the steps necessary to achieve satisfactory performance levels in all areas, and finally, (3) for well established libraries, to suggest the steps necessary to achieve excellence. These…

It Never Hurts To Go Back and Remind Ourselves about the Basics in Newspaper Journalism.

ERIC Educational Resources Information Center

Konkle, Bruce E.

2002-01-01

Suggests knowing the basics is critical if newspaper advisers and staffs are to move their newspaper into the best, excellent, superior, above average, all-everything category a scholastic press evaluation service may award. Discusses the basic areas of writing, design, photojournalism, advertising, and overall coverage. (RS)

Limitations of Using Microsoft Excel Version 2016 (MS Excel 2016) for Statistical Analysis for Medical Research.

PubMed

Tanavalee, Chotetawan; Luksanapruksa, Panya; Singhatanadgige, Weerasak

2016-06-01

Microsoft Excel (MS Excel) is a commonly used program for data collection and statistical analysis in biomedical research. However, this program has many limitations, including fewer functions that can be used for analysis and a limited number of total cells compared with dedicated statistical programs. MS Excel cannot complete analyses with blank cells, and cells must be selected manually for analysis. In addition, it requires multiple steps of data transformation and formulas to plot survival analysis graphs, among others. The Megastat add-on program, which will be supported by MS Excel 2016 soon, would eliminate some limitations of using statistic formulas within MS Excel.

Cherenkov detectors for spatial imaging applications using discrete-energy photons

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rose, Paul B.; Erickson, Anna S., E-mail: erickson@gatech.edu

Cherenkov detectors can offer a significant advantage in spatial imaging applications when excellent timing response, low noise and cross talk, large area coverage, and the ability to operate in magnetic fields are required. We show that an array of Cherenkov detectors with crude energy resolution coupled with monochromatic photons resulting from a low-energy nuclear reaction can be used to produce a sharp image of material while providing large and inexpensive detector coverage. The analysis of the detector response to relative transmission of photons with various energies allows for reconstruction of material's effective atomic number further aiding in high-Z material identification.

Comparison of IMRT planning with two-step and one-step optimization: a strategy for improving therapeutic gain and reducing the integral dose

NASA Astrophysics Data System (ADS)

Abate, A.; Pressello, M. C.; Benassi, M.; Strigari, L.

2009-12-01

The aim of this study was to evaluate the effectiveness and efficiency in inverse IMRT planning of one-step optimization with the step-and-shoot (SS) technique as compared to traditional two-step optimization using the sliding windows (SW) technique. The Pinnacle IMRT TPS allows both one-step and two-step approaches. The same beam setup for five head-and-neck tumor patients and dose-volume constraints were applied for all optimization methods. Two-step plans were produced converting the ideal fluence with or without a smoothing filter into the SW sequence. One-step plans, based on direct machine parameter optimization (DMPO), had the maximum number of segments per beam set at 8, 10, 12, producing a directly deliverable sequence. Moreover, the plans were generated whether a split-beam was used or not. Total monitor units (MUs), overall treatment time, cost function and dose-volume histograms (DVHs) were estimated for each plan. PTV conformality and homogeneity indexes and normal tissue complication probability (NTCP) that are the basis for improving therapeutic gain, as well as non-tumor integral dose (NTID), were evaluated. A two-sided t-test was used to compare quantitative variables. All plans showed similar target coverage. Compared to two-step SW optimization, the DMPO-SS plans resulted in lower MUs (20%), NTID (4%) as well as NTCP values. Differences of about 15-20% in the treatment delivery time were registered. DMPO generates less complex plans with identical PTV coverage, providing lower NTCP and NTID, which is expected to reduce the risk of secondary cancer. It is an effective and efficient method and, if available, it should be favored over the two-step IMRT planning.

Providing for consideration of the bill (H.R. 3350) to authorize health insurance issuers to continue to offer for sale current individual health insurance coverage in satisfaction of the minimum essential health insurance coverage requirement, and for other purposes.

THOMAS, 113th Congress

Rep. Burgess, Michael C. [R-TX-26

2013-11-14

House - 11/15/2013 On agreeing to the resolution Agreed to by recorded vote: 228 - 189 (Roll no. 584). (All Actions) Tracker: This bill has the status Agreed to in HouseHere are the steps for Status of Legislation:

Linear micromechanical stepping drive for pinhole array positioning

NASA Astrophysics Data System (ADS)

Endrödy, Csaba; Mehner, Hannes; Grewe, Adrian; Hoffmann, Martin

2015-05-01

A compact linear micromechanical stepping drive for positioning a 7 × 5.5 mm2 optical pinhole array is presented. The system features a step size of 13.2 µm and a full displacement range of 200 µm. The electrostatic inch-worm stepping mechanism shows a compact design capable of positioning a payload 50% of its own weight. The stepping drive movement, step sizes and position accuracy are characterized. The actuated pinhole array is integrated in a confocal chromatic hyperspectral imaging system, where coverage of the object plane, and therefore the useful picture data, can be multiplied by 14 in contrast to a non-actuated array.

Sequential control of step-bunching during graphene growth on SiC (0001)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bao, Jianfeng; Kusunoki, Michiko; Yasui, Osamu

2016-08-22

We have investigated the relation between the step-bunching and graphene growth phenomena on an SiC substrate. We found that only a minimum amount of step-bunching occurred during the graphene growth process with a high heating rate. On the other hand, a large amount of step-bunching occurred using a slow heating process. These results indicated that we can control the degree of step-bunching during graphene growth by controlling the heating rate. We also found that graphene coverage suppressed step bunching, which is an effective methodology not only in the graphene technology but also in the SiC-based power electronics.

Surface structure of coherently strained ceria ultrathin films

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shi, Yezhou; Stone, Kevin H.; Guan, Zixuan

2016-11-14

Cerium oxide, or ceria, is an important material for solid oxide fuel cells and water splitting devices. Although the ceria surface is active in catalytic and electrochemical reactions, how its catalytic properties are affected by the surface structure under operating conditions is far from understood. We investigate the structure of the coherently strained CeO 2 ultrathin films on yttria-stabilized zirconia (001) single crystals by specular synchrotron x-ray diffraction (XRD) under oxidizing conditions as a first step to study the surface structure in situ. An excellent agreement between the experiment data and the model is achieved by using a “stacks andmore » islands” model that has a two-component roughness. One component is due to the tiny clusters of nanometer scale in lateral dimensions on each terrace, while the other component is due to slightly different CeO 2 thickness that span over hundreds of nanometers on neighboring terraces. We attribute the nonuniform thickness to step depairing during the thin film deposition that is supported by the surface morphology results on the microscopic level. Importantly, our model also shows that the polarity of the ceria surface is removed by a half monolayer surface coverage of oxygen. In conclusion, the successful resolution of the ceria surface structure using in situ specular synchrotron XRD paves the way to study the structural evolution of ceria as a fuel cell electrode under catalytically relevant temperatures and gas pressures.« less

[Using the concept of universal health coverage to promote the health system reform in China].

PubMed

Hu, S L

2016-11-06

The paper is systematically explained the definition, contents of universal health coverage (UHC). Universal health coverage calls for all people to have access to quality health services they need without facing undue financial burden. The relationship between five main attributes, i.e., quality, efficiency, equity, accountability and resilience, and their 15 action plans has been explained. The nature of UHC is belonged to the State and government. The core function is commitment with equality. The whole-of-system method is used to promoting the health system reform. In China, the universal health coverage has been reached to the preliminary achievements, which include universal coverage of social medical insurance, basic medical services, basic public health services, and the provision of essential medicines. China has completed millennium development goals (MDG) and is being stepped to the sustainable development goals (SDG).

Validity and reliability of the activPAL3 for measuring posture and stepping in adults and young people.

PubMed

Sellers, Ceri; Dall, Philippa; Grant, Margaret; Stansfield, Ben

2016-01-01

Characterisation of free-living physical activity requires the use of validated and reliable monitors. This study reports an evaluation of the validity and reliability of the activPAL3 monitor for the detection of posture and stepping in both adults and young people. Twenty adults (median 27.6y; IQR22.6y) and 8 young people (12.0y; IQR4.1y) performed standardised activities and activities of daily living (ADL) incorporating sedentary, upright and stepping activity. Agreement, specificity and positive predictive value were calculated between activPAL3 outcomes and the gold-standard of video observation. Inter-device reliability was calculated between 4 monitors. Sedentary and upright times for standardised activities were within ±5% of video observation as was step count (excluding jogging) for both adults and young people. Jogging step detection accuracy reduced with increasing cadence >150stepsmin(-1). For ADLs, sensitivity to stepping was very low for adults (40.4%) but higher for young people (76.1%). Inter-device reliability was either good (ICC(1,1)>0.75) or excellent (ICC(1,1)>0.90) for all outcomes. An excellent level of detection of standardised postures was demonstrated by the activPAL3. Postures such as seat-perching, kneeling and crouching were misclassified when compared to video observation. The activPAL3 appeared to accurately detect 'purposeful' stepping during ADL, but detection of smaller stepping movements was poor. Small variations in outcomes between monitors indicated that differences in monitor placement or hardware may affect outcomes. In general, the detection of posture and purposeful stepping with the activPAL3 was excellent indicating that it is a suitable monitor for characterising free-living posture and purposeful stepping activity in healthy adults and young people. Copyright © 2015 Elsevier B.V. All rights reserved.

Assessment of liver ablation using cone beam computed tomography.

PubMed

Abdel-Rehim, Mohamed; Ronot, Maxime; Sibert, Annie; Vilgrain, Valérie

2015-01-14

To investigate the feasibility and accuracy of cone beam computed tomography (CBCT) in assessing the ablation zone after liver tumor ablation. Twenty-three patients (17 men and 6 women, range: 45-85 years old, mean age 65 years) with malignant liver tumors underwent ultrasound-guided percutaneous tumor ablation [radiofrequency (n = 14), microwave (n = 9)] followed by intravenous contrast-enhanced CBCT. Baseline multidetector computed tomography (MDCT) and peri-procedural CBCT images were compared. CBCT image quality was assessed as poor, good, or excellent. Image fusion was performed to assess tumor coverage, and quality of fusion was rated as bad, good, or excellent. Ablation zone volumes on peri-procedural CBCT and post-procedural MDCT were compared using the non-parametric paired Wilcoxon t-test. Rate of primary ablation effectiveness was 100%. There were no complications related to ablation. Local tumor recurrence and new liver tumors were found 3 mo after initial treatment in one patient (4%). The ablation zone was identified in 21/23 (91.3%) patients on CBCT. The fusion of baseline MDCT and peri-procedural CBCT images was feasible in all patients and showed satisfactory tumor coverage (at least 5-mm margin). CBCT image quality was poor, good, and excellent in 2 (9%), 8 (35%), and 13 (56%), patients respectively. Registration quality between peri-procedural CBCT and post-procedural MDCT images was good to excellent in 17/23 (74%) patients. The median ablation volume on peri-procedural CBCT and post-procedural MDCT was 30 cm(3) (range: 4-95 cm(3)) and 30 cm(3) (range: 4-124 cm(3)), respectively (P-value > 0.2). There was a good correlation (r = 0.79) between the volumes of the two techniques. Contrast-enhanced CBCT after tumor ablation of the liver allows early assessment of the ablation zone.

Massachusetts health reform: employers, lower-wage workers and universal coverage.

PubMed

Felland, Laurie; Draper, Debra; Liebhaber, Allison

2007-07-01

As Massachusetts' landmark effort to reach nearly universal health coverage unfolds, the state is now focusing on employers to take steps to increase coverage. All employers--except firms with fewer than 11 workers--face new requirements under the 2006 law, including establishing Section 125, or cafeteria, plans to allow workers to purchase insurance with pre-tax dollars and paying a $295 annual fee if they do not make a "fair and reasonable" contribution to the cost of workers' coverage. Through interviews with Massachusetts health care leaders (see Data Source), the Center for Studying Health System Change (HSC) examined how the law is likely to affect employer decisions to offer health insurance to workers and employee decisions to purchase coverage. Market observers believe many small firms may be unaware of specific requirements and that some could prove onerous. Moreover, the largest impact on small employers may come from the individual mandate for all residents to have a minimum level of health insurance. This mandate may add costs for firms if more workers take up coverage offers, seek more generous coverage or pressure employers to offer coverage. Despite reform of the individual and small group markets, including development of new insurance products, concerns remain about the affordability of coverage and the ability to stem rising health care costs.

The molecular dynamics of adsorption and dissociation of O{sub 2} on Pt(553)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobse, Leon, E-mail: l.jacobse@chem.leidenuniv.nl; Dunnen, Angela den; Juurlink, Ludo B. F.

2015-07-07

Molecular adsorption and dissociation of O{sub 2} on the stepped Pt(553) surface have been investigated using supersonic molecular beam techniques and temperature programmed desorption. The initial and coverage-dependent sticking probability was determined with the King and Wells technique for various combinations of incident kinetic energy, surface temperature, incident angle, and surface coverage. A comparison with similar data for Pt(533) and Pt(110)(1 × 2) shows quantitatively the same high step-induced sticking at low incident energies compared to Pt(111). The enhancement is therefore insensitive to the exact arrangement of atoms forming surface corrugation. We consider energy transfer and electronic effects to explainmore » the enhanced sticking. On the other hand, dissociation dynamics at higher incident kinetic energies are strongly dependent on step type. The Pt(553) and Pt(533) surfaces are more reactive than Pt(111), but the (100) step shows higher sticking than the (110) step. We relate this difference to a variation in the effective lowering of the barrier to dissociation from molecularly adsorbed states into atomic states. Our findings are in line with results from experimental desorption studies and theoretical studies of atomic binding energies. We discuss the influence of the different step types on sticking and dissociation dynamics with a one-dimensional potential energy surface.« less

A Study of the Mechanism of the Hydrogen Evolution Reaction on Nickel by Surface Interrogation Scanning Electrochemical Microscopy.

PubMed

Liang, Zhenxing; Ahn, Hyun S; Bard, Allen J

2017-04-05

The hydrogen evolution reaction (HER) on Ni in alkaline media was investigated by scanning electrochemical microscopy under two operating modes. First, the substrate generation/tip collection mode was employed to extract the "true" cathodic current associated with the HER from the total current in the polarization curve. Compared to metallic Ni, the electrocatalytic activity of the HER is improved in the presence of the low-valence-state oxide of Ni. This result is in agreement with a previous claim that the dissociative adsorption of water can be enhanced at the Ni/Ni oxide interface. Second, the surface-interrogation scanning electrochemical microscopy (SI-SECM) mode was used to directly measure the coverage of the adsorbed hydrogen on Ni at given potentials. Simulation indicates that the hydrogen coverage follows a Frumkin isotherm with respect to the applied potential. On the basis of the combined analysis of the Tafel slope and surface hydrogen coverage, the rate-determining step is suggested to be the adsorption of hydrogen (Volmer step) in the investigated potential window.

Shielded cables with optimal braided shields

NASA Astrophysics Data System (ADS)

Homann, E.

1991-01-01

Extensive tests were done in order to determine what factors govern the design of braids with good shielding effectiveness. The results are purely empirical and relate to the geometrical relationships between the braid parameters. The influence of various parameters on the shape of the transfer impedance versus frequency curve were investigated step by step. It was found that the optical coverage had been overestimated in the past. Good shielding effectiveness results not from high optical coverage as such, but from the proper type of coverage, which is a function of the braid angle and the element width. These dependences were measured for the ordinary range of braid angles (20 to 40 degrees). They apply to all plaiting machines and all gages of braid wire. The design rules are largely the same for bright, tinned, silver-plated and even lacquered copper wires. A new type of braid, which has marked advantages over the conventional design, was proposed. With the 'mixed-element' technique, an optimal braid design can be specified on any plaiting machine, for any possible cable diameter, and for any desired angle. This is not possible for the conventional type of braid.

A Critique of Books for College Libraries, 2d ed.

ERIC Educational Resources Information Center

Pownall, David E.

The second edition of "Books for College Libraries," a six-volume work listing 38,651 titles is flawed, although it shows merit, and should be useful. Quality of selections and coverage range from good through excellent to superb. The primary flaws relate to the quality and extent of selections, particularly for such disciplines as history and…

Assessing Progress, Impact, and Next Steps in Rolling Out Voluntary Medical Male Circumcision for HIV Prevention in 14 Priority Countries in Eastern and Southern Africa through 2014

PubMed Central

Kripke, Katharine; Samuelson, Julia; Schnure, Melissa; Dalal, Shona; Farley, Timothy; Hankins, Catherine; Thomas, Anne G.; Reed, Jason; Stegman, Peter; Bock, Naomi

2016-01-01

Background In 2007, the World Health Organization and the Joint United Nations Programme on HIV/AIDS (UNAIDS) identified 14 priority countries across eastern and southern Africa for scaling up voluntary medical male circumcision (VMMC) services. Several years into this effort, we reflect on progress. Methods Using the Decision Makers’ Program Planning Tool (DMPPT) 2.1, we assessed age-specific impact, cost-effectiveness, and coverage attributable to circumcisions performed through 2014. We also compared impact of actual progress to that of achieving 80% coverage among men ages 15–49 in 12 VMMC priority countries and Nyanza Province, Kenya. We populated the models with age-disaggregated VMMC service statistics and with population, mortality, and HIV incidence and prevalence projections exported from country-specific Spectrum/Goals files. We assumed each country achieved UNAIDS’ 90-90-90 treatment targets. Results More than 9 million VMMCs were conducted through 2014: 43% of the estimated 20.9 million VMMCs required to reach 80% coverage by the end of 2015. The model assumed each country reaches the UNAIDS targets, and projected that VMMCs conducted through 2014 will avert 240,000 infections by the end of 2025, compared to 1.1 million if each country had reached 80% coverage by the end of 2015. The median estimated cost per HIV infection averted was $4,400. Nyanza Province in Kenya, the 11 priority regions in Tanzania, and Uganda have reached or are approaching MC coverage targets among males ages 15–24, while coverage in other age groups is lower. Across all countries modeled, more than half of the projected HIV infections averted were attributable to circumcising 10- to 19-year-olds. Conclusions The priority countries have made considerable progress in VMMC scale-up, and VMMC remains a cost-effective strategy for epidemic impact, even assuming near-universal HIV diagnosis, treatment coverage, and viral suppression. Examining circumcision coverage by five-year age groups will inform countries’ decisions about next steps. PMID:27441648

Transfrontal orbitotomy in the dog: an adaptable three-step approach to the orbit.

PubMed

Håkansson, Nils Wallin; Håkansson, Berit Wallin

2010-11-01

To describe an adaptable and extensive method for orbitotomy in the dog. An adaptable three-step technique for orbitotomy was developed and applied in nine consecutive cases. The steps are zygomatic arch resection laterally, temporalis muscle elevation medially and zygomatic process osteotomy anteriorly-dorsally. The entire orbit is accessed with excellent exposure and room for surgical manipulation. Facial nerve, lacrimal nerve and lacrimal gland function are preserved. The procedure can easily be converted into an orbital exenteration. Exposure of the orbit was excellent in all cases and anatomically correct closure was achieved. Signs of postoperative discomfort were limited, with moderate, reversible swelling in two cases and mild in seven. Wound infection or emphysema did not occur, nor did any other complication attributable to the operative procedure. Blinking ability and lacrimal function were preserved over follow-up times ranging from 1 to 4 years. Transfrontal orbitotomy in the dog offers excellent exposure and room for manipulation. Anatomically correct closure is easily accomplished, postoperative discomfort is limited and complications are mild and temporary. © 2010 American College of Veterinary Ophthalmologists.

Dimer formation and surface alloying: a STM study of lead on Cu(211)

NASA Astrophysics Data System (ADS)

Bartels, L.; Zöphel, S.; Meyer, G.; Henze, E.; Rieder, K.-H.

1997-02-01

We present a STM investigation of Pb adsorption on the Cu(211) surface in the temperature range between 30 K and room temperature. We observe three different kinds of ordered 1D Pb and PbCu chains (nanowires) located at the intrinsic step edges of the Cu(211) surface. On room temperature prepared samples, Pb is found to be incorporated into the step edges of the (211) surface. The first ordered structure consists of CuPb chains at the step edges (p(2 × disorder)) and is followed with increasing coverage by a close packed row of Pb-atoms (p(4 × disorder)). Preparation at low temperature yields Pb-dimers, and the first ordered structure is a row of Pb-dimers at the step edge (p(3 × disorder)) followed with increased coverage by a structure as described above. By systematic manipulation with the tunneling tip, we could get additional insight into the structural elements of the PbCu layer on the atomic scale. Furthermore, by measuring the threshold resistance to detach atoms from different ad-sites, we can approximately determine the binding energy and gain some insight into the thermodynamical parameters involved.

Pathways from Autism Spectrum Disorder (ASD) Diagnosis to Genetic Testing

PubMed Central

Barton, Krysta S.; Tabor, Holly K.; Starks, Helene; Garrison, Nanibaa’ A.; Laurino, Mercy; Burke, Wylie

2017-01-01

Purpose This study examines challenges faced by families and health providers related to genetic testing for autism spectrum disorder (ASD). Methods This qualitative study of 14 parents and 15 health providers identified an unstandardized three-step process for families who pursue ASD genetic testing. Results Step 1 is the clinical diagnosis of ASD, confirmed by providers practicing alone or in a team. Step 2 is the offer of genetic testing to find an etiology. For those offered testing, step 3 involves the parents’ decision whether to pursue testing. Despite professional guidelines and recommendations, interviews describe considerable variability in approaches to genetic testing for ASD, a lack of consensus among providers, and questions about clinical utility. Many families in our study were unaware of the option for genetic testing; testing decisions by parents appear to be influenced by both provider recommendations and insurance coverage. Conclusion Consideration of genetic testing for ASD should take into account different views about the clinical utility of testing and variability in insurance coverage. Ideally, policy makers from the range of clinical specialties involved in ASD care should revisit policies to clarify the purpose of genetic testing for ASD and promote consensus about its appropriate use. PMID:29048417

What Medical Directors Need to Know about Dialysis Facility Water Management.

PubMed

Kasparek, Ted; Rodriguez, Oscar E

2015-06-05

The medical directors of dialysis facilities have many operational clinic responsibilities, which on first glance, may seem outside the realm of excellence in patient care. However, a smoothly running clinic is integral to positive patient outcomes. Of the conditions for coverage outlined by the Centers for Medicare and Medicaid Services, one most critical to quality dialysis treatment is the provision of safe purified dialysis water, because there are many published instances where clinic failure in this regard has resulted in patient harm. As the clinical leader of the facility, the medical director is obliged to have knowledge of his/her facility's water treatment system to reliably ensure that the purified water used in dialysis will meet the standards for quality set by the Association for the Advancement of Medical Instrumentation and used by the Centers for Medicare and Medicaid Services for conditions for coverage. The methods used to both achieve and maintain these quality standards should be a part of quality assessment and performance improvement program meetings. The steps for water treatment, which include pretreatment, purification, and distribution, are largely the same, regardless of the system used. Each water treatment system component has a specific role in the process and requires individualized maintenance and monitoring. The medical director should provide leadership by being engaged with the process, knowing the facility's source water, and understanding water treatment system operation as well as the clinical significance of system failure. Successful provision of quality water will be achieved by those medical directors who learn, know, and embrace the requirements of dialysis water purification and system maintenance. Copyright © 2015 by the American Society of Nephrology.

Reactivity of chemisorbed oxygen atoms and their catalytic consequences during CH4-O2 catalysis on supported Pt clusters.

PubMed

Chin, Ya-Huei Cathy; Buda, Corneliu; Neurock, Matthew; Iglesia, Enrique

2011-10-12

Kinetic and isotopic data and density functional theory treatments provide evidence for the elementary steps and the active site requirements involved in the four distinct kinetic regimes observed during CH(4) oxidation reactions using O(2), H(2)O, or CO(2) as oxidants on Pt clusters. These four regimes exhibit distinct rate equations because of the involvement of different kinetically relevant steps, predominant adsorbed species, and rate and equilibrium constants for different elementary steps. Transitions among regimes occur as chemisorbed oxygen (O*) coverages change on Pt clusters. O* coverages are given, in turn, by a virtual O(2) pressure, which represents the pressure that would give the prevalent steady-state O* coverages if their adsorption-desorption equilibrium was maintained. The virtual O(2) pressure acts as a surrogate for oxygen chemical potentials at catalytic surfaces and reflects the kinetic coupling between C-H and O═O activation steps. O* coverages and virtual pressures depend on O(2) pressure when O(2) activation is equilibrated and on O(2)/CH(4) ratios when this step becomes irreversible as a result of fast scavenging of O* by CH(4)-derived intermediates. In three of these kinetic regimes, C-H bond activation is the sole kinetically relevant step, but occurs on different active sites, which evolve from oxygen-oxygen (O*-O*), to oxygen-oxygen vacancy (O*-*), and to vacancy-vacancy (*-*) site pairs as O* coverages decrease. On O*-saturated cluster surfaces, O*-O* site pairs activate C-H bonds in CH(4) via homolytic hydrogen abstraction steps that form CH(3) groups with significant radical character and weak interactions with the surface at the transition state. In this regime, rates depend linearly on CH(4) pressure but are independent of O(2) pressure. The observed normal CH(4)/CD(4) kinetic isotope effects are consistent with the kinetic-relevance of C-H bond activation; identical (16)O(2)-(18)O(2) isotopic exchange rates in the presence or absence of CH(4) show that O(2) activation steps are quasi-equilibrated during catalysis. Measured and DFT-derived C-H bond activation barriers are large, because of the weak stabilization of the CH(3) fragments at transition states, but are compensated by the high entropy of these radical-like species. Turnover rates in this regime decrease with increasing Pt dispersion, because low-coordination exposed Pt atoms on small clusters bind O* more strongly than those that reside at low-index facets on large clusters, thus making O* less effective in H-abstraction. As vacancies (*, also exposed Pt atoms) become available on O*-covered surfaces, O*-* site pairs activate C-H bonds via concerted oxidative addition and H-abstraction in transition states effectively stabilized by CH(3) interactions with the vacancies, which lead to much higher turnover rates than on O*-O* pairs. In this regime, O(2) activation becomes irreversible, because fast C-H bond activation steps scavenge O* as it forms. Thus, O* coverages are set by the prevalent O(2)/CH(4) ratios instead of the O(2) pressures. CH(4)/CD(4) kinetic isotope effects are much larger for turnovers mediated by O*-* than by O*-O* site pairs, because C-H (and C-D) activation steps are required to form the * sites involved in C-H bond activation. Turnover rates for CH(4)-O(2) reactions mediated by O*-* pairs decrease with increasing Pt dispersion, as in the case of O*-O* active structures, because stronger O* binding on small clusters leads not only to less reactive O* atoms, but also to lower vacancy concentrations at cluster surfaces. As O(2)/CH(4) ratios and O* coverages become smaller, O(2) activation on bare Pt clusters becomes the sole kinetically relevant step; turnover rates are proportional to O(2) pressures and independent of CH(4) pressure and no CH(4)/CD(4) kinetic isotope effects are observed. In this regime, turnover rates become nearly independent of Pt dispersion, because the O(2) activation step is essentially barrierless. In the absence of O(2), alternate weaker oxidants, such as H(2)O or CO(2), lead to a final kinetic regime in which C-H bond dissociation on *-* pairs at bare cluster surfaces limit CH(4) conversion rates. Rates become first-order in CH(4) and independent of coreactant and normal CH(4)/CD(4) kinetic isotope effects are observed. In this case, turnover rates increase with increasing dispersion, because low-coordination Pt atoms stabilize the C-H bond activation transition states more effectively via stronger binding to CH(3) and H fragments. These findings and their mechanistic interpretations are consistent with all rate and isotopic data and with theoretical estimates of activation barriers and of cluster size effects on transition states. They serve to demonstrate the essential role of the coverage and reactivity of chemisorbed oxygen in determining the type and effectiveness of surface structures in CH(4) oxidation reactions using O(2), H(2)O, or CO(2) as oxidants, as well as the diversity of rate dependencies, activation energies and entropies, and cluster size effects that prevail in these reactions. These results also show how theory and experiments can unravel complex surface chemistries on realistic catalysts under practical conditions and provide through the resulting mechanistic insights specific predictions for the effects of cluster size and surface coordination on turnover rates, the trends and magnitude of which depend sensitively on the nature of the predominant adsorbed intermediates and the kinetically relevant steps.

AMPLISAS: a web server for multilocus genotyping using next-generation amplicon sequencing data.

PubMed

Sebastian, Alvaro; Herdegen, Magdalena; Migalska, Magdalena; Radwan, Jacek

2016-03-01

Next-generation sequencing (NGS) technologies are revolutionizing the fields of biology and medicine as powerful tools for amplicon sequencing (AS). Using combinations of primers and barcodes, it is possible to sequence targeted genomic regions with deep coverage for hundreds, even thousands, of individuals in a single experiment. This is extremely valuable for the genotyping of gene families in which locus-specific primers are often difficult to design, such as the major histocompatibility complex (MHC). The utility of AS is, however, limited by the high intrinsic sequencing error rates of NGS technologies and other sources of error such as polymerase amplification or chimera formation. Correcting these errors requires extensive bioinformatic post-processing of NGS data. Amplicon Sequence Assignment (AMPLISAS) is a tool that performs analysis of AS results in a simple and efficient way, while offering customization options for advanced users. AMPLISAS is designed as a three-step pipeline consisting of (i) read demultiplexing, (ii) unique sequence clustering and (iii) erroneous sequence filtering. Allele sequences and frequencies are retrieved in excel spreadsheet format, making them easy to interpret. AMPLISAS performance has been successfully benchmarked against previously published genotyped MHC data sets obtained with various NGS technologies. © 2015 John Wiley & Sons Ltd.

Automatic cloud coverage assessment of Formosat-2 image

NASA Astrophysics Data System (ADS)

Hsu, Kuo-Hsien

2011-11-01

Formosat-2 satellite equips with the high-spatial-resolution (2m ground sampling distance) remote sensing instrument. It has been being operated on the daily-revisiting mission orbit by National Space organization (NSPO) of Taiwan since May 21 2004. NSPO has also serving as one of the ground receiving stations for daily processing the received Formosat- 2 images. The current cloud coverage assessment of Formosat-2 image for NSPO Image Processing System generally consists of two major steps. Firstly, an un-supervised K-means method is used for automatically estimating the cloud statistic of Formosat-2 image. Secondly, manual estimation of cloud coverage from Formosat-2 image is processed by manual examination. Apparently, a more accurate Automatic Cloud Coverage Assessment (ACCA) method certainly increases the efficiency of processing step 2 with a good prediction of cloud statistic. In this paper, mainly based on the research results from Chang et al, Irish, and Gotoh, we propose a modified Formosat-2 ACCA method which considered pre-processing and post-processing analysis. For pre-processing analysis, cloud statistic is determined by using un-supervised K-means classification, Sobel's method, Otsu's method, non-cloudy pixels reexamination, and cross-band filter method. Box-Counting fractal method is considered as a post-processing tool to double check the results of pre-processing analysis for increasing the efficiency of manual examination.

[Plastic Reconstruction with a Vascular Pedicle Latissimus Dorsi Flap after Sternal Osteomyelitis].

PubMed

Spindler, N; Langer, S

2017-10-01

Objective: Sternal bone and soft tissue debridement after osteomyelitis of the sternum with simultaneous defect coverage using a vascular pedicle latissimus dorsi flap. Indication: Profound sternal wound healing disorders may be covered with various flap grafts. The latissimus dorsi flap provides a fast, sufficient and reliable option to cover sternal defects. If the bone and soft tissue debridement has been very radical, coverage may be performed in a one-stage procedure. Method: The individual surgical steps for sternal debridement with simultaneous defect coverage using a vascular pedicle latissimus dorsi flap are shown. Conclusion: The radicality of debridement is crucial to treatment success and allows debridement and flap graft coverage to be performed at the same time. If two surgeons work simultaneously, the duration of surgery may be significantly reduced. Georg Thieme Verlag KG Stuttgart · New York.

Newly Diagnosed (Brain Tumor)

MedlinePlus

... coverage. STEP 4: Get to know your healthcare team Your healthcare team will consist of doctors, nurses, ... the medical professionals you may encounter: Your Healthcare Team Neurosurgeon: A surgeon who treats many disorders of ...

A study of vaccine-induced immune pressure on breakthrough infections in the Phambili phase 2b HIV-1 vaccine efficacy trial

PubMed Central

Rolland, M.; Magaret, C.A.; Rademeyer, C.; Fiore-Gartland, A.; Edlefsen, P.T.; DeCamp, A.; Ahmed, H.; Ngandu, N.; Larsen, B.B.; Frahm, N.; Marais, J.; Thebus, R.; Geraghty, D.; Hural, J.; Corey, L.; Kublin, J.; Gray, G.; McElrath, M.J.; Mullins, J.I.; Gilbert, P.B.; Williamson, C.

2016-01-01

Introduction The Merck Adenovirus-5 Gag/Pol/Nef HIV-1 subtype-B vaccine evaluated in predominately subtype B epidemic regions (Step Study), while not preventing infection, exerted vaccine-induced immune pressure on HIV-1 breakthrough infections. Here we investigated if the same vaccine exerted immune pressure when tested in the Phambili Phase 2b study in a subtype C epidemic. Materials and methods A sieve analysis, which compares breakthrough viruses from placebo and vaccine arms, was performed on 277 near full-length genomes generated from 23 vaccine and 20 placebo recipients. Vaccine coverage was estimated by computing the percentage of 9-mers that were exact matches to the vaccine insert. Results There was significantly greater protein distances from the vaccine immunogen sequence in Gag (p = 0.045) and Nef (p = 0.021) in viruses infecting vaccine recipients compared to placebo recipients. Twenty-seven putative sites of vaccine-induced pressure were identified (p < 0.05) in Gag (n = 10), Pol (n = 7) and Nef (n = 10), although they did not remain significant after adjustment for multiple comparisons. We found the epitope sieve effect in Step was driven by HLA A*02:01; an allele which was found in low frequency in Phambili participants compared to Step participants. Furthermore, the coverage of the vaccine against subtype C Phambili viruses was 31%, 46% and 14% for Gag, Pol and Nef, respectively, compared to subtype B Step virus coverage of 56%, 61% and 26%, respectively. Discussion This study presents evidence of sieve effects in Gag and Nef; however could not confirm effects on specific amino acid sites. We propose that this weaker signal of vaccine immune pressure detected in the Phambili study compared to the Step study may have been influenced by differences in host genetics (HLA allele frequency) and reduced impact of vaccine-induced immune responses due to mismatch between the viral subtype in the vaccine and infecting subtypes. PMID:27756485

Comparison of anticancer drug coverage decisions in the United States and United Kingdom: does the evidence support the rhetoric?

PubMed

Mason, Anne; Drummond, Michael; Ramsey, Scott; Campbell, Jonathan; Raisch, Dennis

2010-07-10

In contrast to the United States, several European countries have health technology assessment programs for drugs, many of which assess cost effectiveness. Coverage decisions that consider cost effectiveness may lead to restrictions in access. For a purposive sample of five decision-making bodies, we analyzed US and United Kingdom coverage decisions on all anticancer drugs approved by the US Food and Drug Administration (FDA) from 2004 to 2008. Data sources for the timing and outcome of licensing and coverage decisions included published and unpublished documentation, Web sites, and personal communication. The FDA approved 59 anticancer drugs over the study period, of which 46 were also approved by the European Medicines Agency. In the United States, 100% of drugs were covered, mostly without restriction. However, the United Kingdom bodies made positive coverage decisions for less than half of licensed drugs (National Institute for Health and Clinical Excellence [NICE]: 39%; Scottish Medicines Consortium [SMC]: 43%). Whereas the Centers for Medicare and Medicaid Services (CMS) and the Department of Veterans Affairs (VA) covered all 59 drugs from the FDA license date, delays were evident for some Regence Group decisions that were informed by cost effectiveness (median, 0 days; semi-interquartile range [SIQR], 122 days; n = 22). Relative to the European Medicines Agency license date, median time to coverage was 783 days (SIQR, 170 days) for NICE and 231 days (SIQR, 129 days) for the SMC. Anticancer drug coverage decisions that consider cost effectiveness are associated with greater restrictions and slower time to coverage. However, this approach may represent an explicit alternative to rationing achieved through the use of patient copayments.

SWATHtoMRM: Development of High-Coverage Targeted Metabolomics Method Using SWATH Technology for Biomarker Discovery.

PubMed

Zha, Haihong; Cai, Yuping; Yin, Yandong; Wang, Zhuozhong; Li, Kang; Zhu, Zheng-Jiang

2018-03-20

The complexity of metabolome presents a great analytical challenge for quantitative metabolite profiling, and restricts the application of metabolomics in biomarker discovery. Targeted metabolomics using multiple-reaction monitoring (MRM) technique has excellent capability for quantitative analysis, but suffers from the limited metabolite coverage. To address this challenge, we developed a new strategy, namely, SWATHtoMRM, which utilizes the broad coverage of SWATH-MS technology to develop high-coverage targeted metabolomics method. Specifically, SWATH-MS technique was first utilized to untargeted profile one pooled biological sample and to acquire the MS 2 spectra for all metabolites. Then, SWATHtoMRM was used to extract the large-scale MRM transitions for targeted analysis with coverage as high as 1000-2000 metabolites. Then, we demonstrated the advantages of SWATHtoMRM method in quantitative analysis such as coverage, reproducibility, sensitivity, and dynamic range. Finally, we applied our SWATHtoMRM approach to discover potential metabolite biomarkers for colorectal cancer (CRC) diagnosis. A high-coverage targeted metabolomics method with 1303 metabolites in one injection was developed to profile colorectal cancer tissues from CRC patients. A total of 20 potential metabolite biomarkers were discovered and validated for CRC diagnosis. In plasma samples from CRC patients, 17 out of 20 potential biomarkers were further validated to be associated with tumor resection, which may have a great potential in assessing the prognosis of CRC patients after tumor resection. Together, the SWATHtoMRM strategy provides a new way to develop high-coverage targeted metabolomics method, and facilitates the application of targeted metabolomics in disease biomarker discovery. The SWATHtoMRM program is freely available on the Internet ( http://www.zhulab.cn/software.php ).

Preventive Care Coverage Notification Act

THOMAS, 113th Congress

Sen. Durbin, Richard J. [D-IL

2014-07-17

Senate - 07/17/2014 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Health Insurance Coverage Protection Act

THOMAS, 111th Congress

Sen. Dorgan, Byron L. [D-ND

2009-02-13

Senate - 02/13/2009 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Retiree Health Coverage Protection Act

THOMAS, 112th Congress

Sen. Kerry, John F. [D-MA

2011-05-26

Senate - 05/26/2011 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Acta Dermatovenerologica Alpina, Pannonica et Adriatica accepted for coverage in Thomson Reuters' Emerging Sources Citation Index (ESCI).

PubMed

Poljak, Mario; Miljković, Jovan; Triglav, Tina

2016-09-01

Acta Dermatovenerologica Alpina, Pannonica et Adriatica (Acta Dermatovenerol APA) is the leading journal in dermatology and sexually transmitted infections in the region. Several important steps were taken during the last 25 years to improve the journal's quality, global visibility, and international impact. After a 1-year trial period, Thomson Reuters recently informed the editorial office that they had accepted Acta Dermatovenerol APA for coverage in Thomson Reuters' new index in the Web of Science Core Collection called the Emerging Sources Citation Index (ESCI). The coverage of Acta Dermatovenerol APA begins with the journal content published online in 2016; that is, from volume 25 onwards.

[The coverage of hepatitis A vaccine among 2-29 year olds and the reporting incidence of hepatitis A in China, 2014].

PubMed

Wang, F Z; Zheng, H; Liu, J H; Sun, X J; Miao, N; Shen, L P; Zhang, G M; Cui, F Q

2016-08-10

To evaluate the hepatitis A vaccine coverage among 2-29 year olds and the reported incidence rates of hepatitis A, in China. Based on data from the national sero-survey on hepatitis B in 2014, information on hepatitis A vaccine immunization was collected and the coverage of hepatitis A vaccine was analyzed with SAS software (Version 9.4). Incidence data on hepatitis A was also collected from the National Notifiable Disease Reporting System between 2004 and 2014, and analyzed using the micro-software Excel 2007. Totally, data involving 29 058 people aged 2-29 years were available for analysis and the overall hepatitis A vaccine coverage was 44.6%. The younger the age, the higher the coverage appeared. Among the 2-6 year and the 7-14 year olds, rates of hepatitis A vaccine coverage were 91.2% and 76.0% respectively. From 2004 to 2014, the incidence rates of hepatitis A in the whole population were declining, annually. The incidence rates showed continuously declining as 82.5%, 90.6%, 72.1% among children at the age groups of 2-6 years, 7-14 years and in the whole population, from 2007 to 2013. After the inclusion of hepatitis A vaccine into the Expanded Programe on Immunization (EPI), the coverage of hepatitis A vaccine among the 2-6 year olds increased to over 90%, with no obvious difference between the urban and rural areas. Incidence of hepatitis A in the 2-6 year olds showed a more rapid decline than that in the whole population.

FEHBP Dependent Coverage Extension Act

THOMAS, 111th Congress

Rep. Van Hollen, Chris [D-MD-8

2010-05-04

House - 05/25/2010 Referred to the Subcommittee on Federal Workforce, Post Office, and the District of Columbia. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Federal Acupuncture Coverage Act of 2011

THOMAS, 112th Congress

Rep. Hinchey, Maurice D. [D-NY-22

2011-04-01

House - 04/08/2011 Referred to the Subcommittee on Federal Workforce, U.S. Postal Service, and Labor Policy . (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Excluding Abortion Coverage from Health Reform Act

THOMAS, 111th Congress

Sen. Coburn, Tom [R-OK

2010-08-05

Senate - 08/05/2010 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

COBRA Coverage Extension Act of 2009

THOMAS, 111th Congress

Sen. Burris, Roland [D-IL

2009-07-21

Senate - 07/21/2009 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Electrical characteristics and step coverage of ZrO2 films deposited by atomic layer deposition for through-silicon via and metal-insulator-metal applications

NASA Astrophysics Data System (ADS)

Choi, Kyeong-Keun; Park, Chan-Gyung; Kim, Deok-kee

2016-01-01

The electrical characteristics and step coverage of ZrO2 films deposited by atomic layer deposition were investigated for through-silicon via (TSV) and metal-insulator-metal applications at temperatures below 300 °C. ZrO2 films were able to be conformally deposited on the scallops of 50-µm-diameter, 100-µm-deep TSV holes. The mean breakdown field of 30-nm-thick ZrO2 films on 30-nm-thick Ta(N) increased about 41% (from 2.7 to 3.8 MV/cm) upon H2 plasma treatment. With the plasma treatment, the breakdown field of the film increased and the temperature coefficient of capacitance decreased significantly, probably as a result of the decreased carbon concentration in the film.

Health Insurance: Most College Students Are Covered through Employer-Sponsored Plans, and Some Colleges and States Are Taking Steps to Increase Coverage. Report to the Committee on Health, Education, Labor, and Pensions, U.S. Senate. GAO-08-389

ERIC Educational Resources Information Center

Dicken, John E.

2008-01-01

College students face challenges obtaining health insurance: they may not have access to insurance through an employer, and as they get older, they may lose dependent coverage obtained through a parent's plan. Federal law ensures continued access to health insurance for some, but not all, such students. Without health insurance, college students…

Using Excel's Solver Function to Facilitate Reciprocal Service Department Cost Allocations

ERIC Educational Resources Information Center

Leese, Wallace R.

2013-01-01

The reciprocal method of service department cost allocation requires linear equations to be solved simultaneously. These computations are often so complex as to cause the abandonment of the reciprocal method in favor of the less sophisticated and theoretically incorrect direct or step-down methods. This article illustrates how Excel's Solver…

Using Excel's Matrix Operations to Facilitate Reciprocal Cost Allocations

ERIC Educational Resources Information Center

Leese, Wallace R.; Kizirian, Tim

2009-01-01

The reciprocal method of service department cost allocation requires linear equations to be solved simultaneously. These computations are often so complex as to cause the abandonment of the reciprocal method in favor of the less sophisticated direct or step-down methods. Here is a short example demonstrating how Excel's sometimes unknown matrix…

A step-by-step guide to non-linear regression analysis of experimental data using a Microsoft Excel spreadsheet.

PubMed

Brown, A M

2001-06-01

The objective of this present study was to introduce a simple, easily understood method for carrying out non-linear regression analysis based on user input functions. While it is relatively straightforward to fit data with simple functions such as linear or logarithmic functions, fitting data with more complicated non-linear functions is more difficult. Commercial specialist programmes are available that will carry out this analysis, but these programmes are expensive and are not intuitive to learn. An alternative method described here is to use the SOLVER function of the ubiquitous spreadsheet programme Microsoft Excel, which employs an iterative least squares fitting routine to produce the optimal goodness of fit between data and function. The intent of this paper is to lead the reader through an easily understood step-by-step guide to implementing this method, which can be applied to any function in the form y=f(x), and is well suited to fast, reliable analysis of data in all fields of biology.

Self-organisation of adsorbed nitrogen on (100) and (410) copper faces: a SPA-LEED study

NASA Astrophysics Data System (ADS)

Sotto, M.; Croset, B.

2000-08-01

The self-organisation of nitrogen nanostructures at different coverages on a (100) copper surface is studied by spot profile analysing low energy electron diffraction (SPA-LEED). The existence of two surface states with a domain of coverage leading to coexistence of the two states as already observed by scanning tunneling microscopy (STM) [Leibsle and Robinson, Phys. Rev. B 47 (1993) 15 865; Leibsle et al., Surf. Sci. 317 (1994) 309; Leibsle, Surf. Sci. 440 (1999) L835] and low energy electron diffraction (LEED) [Sotto et al., Surf. Sci. 371 (1997) 36] is confirmed. In the first state, the surface is organised in square shape islands separated by bare copper <100> rows. This work shows that the surface periodicity depends on the preparation of the nitrogen overlayer. When nitrogen coverage is obtained by adsorption with a sample temperature near 320°C, the periodicity does not vary with coverage and is found to be equal to 55±2 Å. At coverages below 0.75±0.05 and if the nitrogen is deposited at room temperature followed by an anneal at 320°C, during long periods of time, the periodicity evolves to large values (˜97±3 Å). During thermal desorption, the long range order with decreasing coverage is maintained but the surface periodicity also evolves continuously to large values (˜100 Å). However, a surface periodicity of 55±2 Å seems to be a characteristic length of this system. The second surface state corresponds to large c(2×2)N domains separated by <110> trenches [Leibsle and Robinson, Phys. Rev. B 47 (1993) 15 865; Leibsle et al., Surf. Sci. 317 (1994) 309; Leibsle, Surf. Sci. 440 (1999) L835]. Nitrogen adsorption on a (410) stepped face induces a reconstruction into a (810) face with double step height. The complex behaviour of this film growth is discussed in the light of existing theories about the driving force leading to nanostructuration.

Solar-based navigation for robotic explorers

NASA Astrophysics Data System (ADS)

Shillcutt, Kimberly Jo

2000-12-01

This thesis introduces the application of solar position and shadowing information to robotic exploration. Power is a critical resource for robots with remote, long-term missions, so this research focuses on the power generation capabilities of robotic explorers during navigational tasks, in addition to power consumption. Solar power is primarily considered, with the possibility of wind power also contemplated. Information about the environment, including the solar ephemeris, terrain features, time of day, and surface location, is incorporated into a planning structure, allowing robots to accurately predict shadowing and thus potential costs and gains during navigational tasks. By evaluating its potential to generate and expend power, a robot can extend its lifetime and accomplishments. The primary tasks studied are coverage patterns, with a variety of plans developed for this research. The use of sun, terrain and temporal information also enables new capabilities of identifying and following sun-synchronous and sun-seeking paths. Digital elevation maps are combined with an ephemeris algorithm to calculate the altitude and azimuth of the sun from surface locations, and to identify and map shadows. Solar navigation path simulators use this information to perform searches through two-dimensional space, while considering temporal changes. Step by step simulations of coverage patterns also incorporate time in addition to location. Evaluations of solar and wind power generation, power consumption, area coverage, area overlap, and time are generated for sets of coverage patterns, with on-board environmental information linked to the simulations. This research is implemented on the Nomad robot for the Robotic Antarctic Meteorite Search. Simulators have been developed for coverage pattern tests, as well as for sun-synchronous and sun-seeking path searches. Results of field work and simulations are reported and analyzed, with demonstrated improvements in efficiency, productivity and lifetime of robotic explorers, along with new solar navigation abilities.

Large Area Coverage of a TPC Endcap with GridPix Detectors

NASA Astrophysics Data System (ADS)

Kaminski, Jochen

2018-02-01

The Large Prototype TPC at DESY, Hamburg, was built by the LCTPC collaboration as a testbed for new readout technologies of Time Projection Chambers. Up to seven modules of about 400 cm2 each can be placed in the endcap. Three of these modules were equipped with a total of 160 GridPix detectors. This is a combination of a highly pixelated readout ASIC and a Micromegas built on top. GridPix detectors have a very high efficiency of detecting primary electrons, which leads to excellent spatial and energy resolutions. For the first time a large number of GridPix detectors has been operated and long segments of tracks have been recorded with excellent precision.

Cost-sharing, physician utilization, and adverse selection among Medicare beneficiaries with chronic health conditions.

PubMed

Hoffman, Geoffrey

2015-02-01

Pooled data from the 2007, 2009, and 2011/2012 California Health Interview Surveys were used to compare the number of self-reported annual physician visits among 36,808 Medicare beneficiaries ≥65 in insurance groups with differential cost-sharing. Adjusted for adverse selection and a set of health covariates, Medicare fee-for-service (FFS) only beneficiaries had similar physician utilization compared with HMO enrollees but fewer visits compared with those with supplemental (1.04, p = .001) and Medicaid (1.55, p = .003) coverage. FFS only beneficiaries in very good or excellent health had fewer visits compared with those of similar health status with supplemental (1.30, p = .001) or Medicaid coverage (2.15, p = .002). For subpopulations with several chronic conditions, FFS only beneficiaries also had fewer visits compared with beneficiaries with supplemental or Medicaid coverage. Observed differences in utilization may reflect efficient and necessary physician utilization among those with chronic health needs. © The Author(s) 2014.

Clinical Paresthesia Atlas Illustrates Likelihood of Coverage Based on Spinal Cord Stimulator Electrode Location.

PubMed

Taghva, Alexander; Karst, Edward; Underwood, Paul

2017-08-01

Concordant paresthesia coverage is an independent predictor of pain relief following spinal cord stimulation (SCS). Using aggregate data, our objective is to produce a map of paresthesia coverage as a function of electrode location in SCS. This retrospective analysis used x-rays, SCS programming data, and paresthesia coverage maps from the EMPOWER registry of SCS implants for chronic neuropathic pain. Spinal level of dorsal column stimulation was determined by x-ray adjudication and active cathodes in patient programs. Likelihood of paresthesia coverage was determined as a function of stimulating electrode location. Segments of paresthesia coverage were grouped anatomically. Fisher's exact test was used to identify significant differences in likelihood of paresthesia coverage as a function of spinal stimulation level. In the 178 patients analyzed, the most prevalent areas of paresthesia coverage were buttocks, anterior and posterior thigh (each 98%), and low back (94%). Unwanted paresthesia at the ribs occurred in 8% of patients. There were significant differences in the likelihood of achieving paresthesia, with higher thoracic levels (T5, T6, and T7) more likely to achieve low back coverage but also more likely to introduce paresthesia felt at the ribs. Higher levels in the thoracic spine were associated with greater coverage of the buttocks, back, and thigh, and with lesser coverage of the leg and foot. This paresthesia atlas uses real-world, aggregate data to determine likelihood of paresthesia coverage as a function of stimulating electrode location. It represents an application of "big data" techniques, and a step toward achieving personalized SCS therapy tailored to the individual's chronic pain. © 2017 International Neuromodulation Society.

A Comparison of Coverage Restrictions for Biopharmaceuticals and Medical Procedures.

PubMed

Chambers, James; Pope, Elle; Bungay, Kathy; Cohen, Joshua; Ciarametaro, Michael; Dubois, Robert; Neumann, Peter J

2018-04-01

Differences in payer evaluation and coverage of pharmaceuticals and medical procedures suggest that coverage may differ for medications and procedures independent of their clinical benefit. We hypothesized that coverage for medications is more restricted than corresponding coverage for nonmedication interventions. We included top-selling medications and highly utilized procedures. For each intervention-indication pair, we classified value in terms of cost-effectiveness (incremental cost per quality-adjusted life-year), as reported by the Tufts Medical Center Cost-Effectiveness Analysis Registry. For each intervention-indication pair and for each of 10 large payers, we classified coverage, when available, as either "more restrictive" or as "not more restrictive," compared with a benchmark. The benchmark reflected the US Food and Drug Administration label information, when available, or pertinent clinical guidelines. We compared coverage policies and the benchmark in terms of step edits and clinical restrictions. Finally, we regressed coverage restrictiveness against intervention type (medication or nonmedication), controlling for value (cost-effectiveness more or less favorable than a designated threshold). We identified 392 medication and 185 procedure coverage decisions. A total of 26.3% of the medication coverage and 38.4% of the procedure coverage decisions were more restrictive than their corresponding benchmarks. After controlling for value, the odds of being more restrictive were 42% lower for medications than for procedures. Including unfavorable tier placement in the definition of "more restrictive" greatly increased the proportion of medication coverage decisions classified as "more restrictive" and reversed our findings. Therapy access depends on factors other than cost and clinical benefit, suggesting potential health care system inefficiency. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Core concepts of human rights and inclusion of vulnerable groups in the mental health policies of Malawi, Namibia, and Sudan

PubMed Central

2013-01-01

Background One of the most crucial steps towards delivering judicious and comprehensive mental health care is the formulation of a policy and plan that will navigate mental health systems. For policy-makers, the challenges of a high-quality mental health system are considerable: the provision of mental health services to all who need them, in an equitable way, in a mode that promotes human rights and health outcomes. Method EquiFrame, a novel policy analysis framework, was used to evaluate the mental health policies of Malawi, Namibia, and Sudan. The health policies were assessed in terms of their coverage of 21 predefined Core Concepts of human rights (Core Concept Coverage), their stated quality of commitment to said Core Concepts (Core Concept Quality), and their inclusion of 12 Vulnerable Groups (Vulnerable Group Coverage). In relation to these summary indices, each policy was also assigned an Overall Summary Ranking, in terms of it being of High, Moderate, or Low quality. Results Substantial variability was identified across EquiFrame’s summary indices for the mental health policies of Malawi, Namibia, and Sudan. However, all three mental health policies scored high on Core Concept Coverage. Particularly noteworthy was the Sudanese policy, which scored 86% on Core Concept Coverage, and 92% on Vulnerable Group Coverage. Particular deficits were evident in the Malawian mental health policy, which scored 33% on Vulnerable Group Coverage and 47% on Core Concept Quality, and was assigned an Overall Summary Ranking of Low accordingly. The Overall Summary Ranking for the Namibian Mental Health Policy was High; for the Sudanese Mental Health Policy was Moderate; and for the Malawian Mental Health Policy was Low. Conclusions If human rights and equity underpin policy formation, it is more likely that they will be inculcated in health service delivery. EquiFrame may provide a novel and valuable tool for mental health policy analysis in relation to core concepts of human rights and inclusion of vulnerable groups, a key practical step in the successful realization of the Millennium Development Goals. PMID:23406583

Using Microsoft Office Excel 2007 to conduct generalized matching analyses.

PubMed

Reed, Derek D

2009-01-01

The generalized matching equation is a robust and empirically supported means of analyzing relations between reinforcement and behavior. Unfortunately, no simple task analysis is available to behavior analysts interested in using the matching equation to evaluate data in clinical or applied settings. This technical article presents a task analysis for the use of Microsoft Excel to analyze and plot the generalized matching equation. Using a data-based case example and a step-by-step guide for completing the analysis, these instructions are intended to promote the use of quantitative analyses by researchers with little to no experience in quantitative analyses or the matching law.

Bone protein “extractomics”: comparing the efficiency of bone protein extractions of Gallus gallus in tandem mass spectrometry, with an eye towards paleoproteomics

PubMed Central

DeHart, Caroline J.; Schweitzer, Mary H.; Thomas, Paul M.; Kelleher, Neil L.

2016-01-01

Proteomic studies of bone require specialized extraction protocols to demineralize and solubilize proteins from within the bone matrix. Although various protocols exist for bone protein recovery, little is known about how discrete steps in each protocol affect the subset of the bone proteome recovered by mass spectrometry (MS) analyses. Characterizing these different “extractomes” will provide critical data for development of novel and more efficient protein extraction methodologies for fossils. Here, we analyze 22 unique sub-extractions of chicken bone and directly compare individual extraction components for their total protein yield and diversity and coverage of bone proteins identified by MS. We extracted proteins using different combinations and ratios of demineralizing reagents, protein-solubilizing reagents, and post-extraction buffer removal methods, then evaluated tryptic digests from 20 µg aliquots of each fraction by tandem MS/MS on a 12T FT-ICR mass spectrometer. We compared total numbers of peptide spectral matches, peptides, and proteins identified from each fraction, the redundancy of protein identifications between discrete steps of extraction methods, and the sequence coverage obtained for select, abundant proteins. Although both alpha chains of collagen I (the most abundant protein in bone) were found in all fractions, other collagenous and non-collagenous proteins (e.g., apolipoprotein, osteonectin, hemoglobin) were differentially identified. We found that when a standardized amount of extracted proteins was analyzed, extraction steps that yielded the most protein (by weight) from bone were often not the ones that produced the greatest diversity of bone proteins, or the highest degree of protein coverage. Generally, the highest degrees of diversity and coverage were obtained from demineralization fractions, and the proteins found in the subsequent solubilization fractions were highly redundant with those in the previous fraction. Based on these data, we identify future directions and parameters to consider (e.g., proteins targeted, amount of sample required) when applying discrete parts of these protocols to fossils. PMID:27812413

Factors associated with dental health care coverage in Mexico: Findings from the National Performance Evaluation Survey 2002-2003.

PubMed

Pérez-Núñez, Ricardo; Medina-Solis, Carlo Eduardo; Maupomé, Gerardo; Vargas-Palacios, Armando

2006-10-01

To determine the level of dental health care coverage in people aged > or =18 years across the country, and to identify the factors associated with coverage. Using the instruments and sampling strategies developed by the World Health Organization for the World Health Survey, a cross-sectional national survey was carried out at the household and individual (adult) levels. Dental data were collected in 20 of Mexico's 32 states. The relationship between coverage and environmental and individual characteristics was examined through logistic regression models. Only 6098 of 24 159 individual respondents reported having oral problems during the preceding 12 months (accounting for 14 284 621 inhabitants of the country if weighted). Only 48% of respondents reporting problems were covered, although details of the appropriateness, timeliness and effectiveness of the intervention(s) were not assessed. The multivariate regression model showed that higher level of education, better socioeconomic status, having at least one chronic disease and having medical insurance were positively associated with better dental care coverage. Age and sex were also associated. Overall dental health care coverage could be improved, assuming that ideal coverage is 100%. Some equality of access issues are apparent because there are differences in coverage across populations in terms of wealth and social status. Identifying the factors associated with sparse coverage is a step in the right direction allowing policymakers to establish strategies aimed at increasing this coverage, focusing on more vulnerable groups and on individuals in greater need of preventive and rehabilitative interventions.

Achieving Professional Excellence: Proceedings of a National Conference on Performance-Based Approaches to Training (Little Rock, Arkansas, October 8-10, 1985).

ERIC Educational Resources Information Center

Harrington, Lois G., Comp.; Kalamas, David J., Comp.

This document contains 47 presentations which focus on professional preparation of personnel in vocational-technical education and industry as an essential step in achieving excellence in educational and industrial training programs. The presentations include "Critical Issues Facing Vocational Teacher Education" (Zellner, Parrish); "A Call for…

Greening School Grounds: Creating Habitats for Learning.

ERIC Educational Resources Information Center

Grant, Tim, Ed.; Littlejohn, Gail, Ed.

Schoolyard greening is an excellent way to promote hands-on, interdisciplinary learning about the environment through projects that benefit schools and increase green space and biodiversity in communities. This book features step-by-step instructions for numerous schoolyard projects from tree nurseries to school composting to native plant gardens,…

recount workflow: Accessing over 70,000 human RNA-seq samples with Bioconductor

PubMed Central

Collado-Torres, Leonardo; Nellore, Abhinav; Jaffe, Andrew E.

2017-01-01

The recount2 resource is composed of over 70,000 uniformly processed human RNA-seq samples spanning TCGA and SRA, including GTEx. The processed data can be accessed via the recount2 website and the recountBioconductor package. This workflow explains in detail how to use the recountpackage and how to integrate it with other Bioconductor packages for several analyses that can be carried out with the recount2 resource. In particular, we describe how the coverage count matrices were computed in recount2 as well as different ways of obtaining public metadata, which can facilitate downstream analyses. Step-by-step directions show how to do a gene-level differential expression analysis, visualize base-level genome coverage data, and perform an analyses at multiple feature levels. This workflow thus provides further information to understand the data in recount2 and a compendium of R code to use the data. PMID:29043067

Amperometric sensor for ethanol based on one-step electropolymerization of thionine-carbon nanofiber nanocomposite containing alcohol oxidase.

PubMed

Wu, Lina; McIntosh, Mike; Zhang, Xueji; Ju, Huangxian

2007-12-15

Thionine had strong interaction with carbon nanofiber (CNF) and was used in the non-covalent functionalization of carbon nanofiber for the preparation of stable thionine-CNF nanocomposite with good dispersion. With a simple one-step electrochemical polymerization of thionine-CNF nanocomposite and alcohol oxidase (AOD), a stable poly(thionine)-CNF/AOD biocomposite film was formed on electrode surface. Based on the excellent catalytic activity of the biocomposite film toward reduction of dissolved oxygen, a sensitive ethanol biosensor was proposed. The ethanol biosensor could monitor ethanol ranging from 2.0 to 252 microM with a detection limit of 1.7 microM. It displayed a rapid response, an expanded linear response range as well as excellent reproducibility and stability. The combination of catalytic activity of CNF and the promising feature of the biocomposite with one-step non-manual technique favored the sensitive determination of ethanol with improved analytical capabilities.

JPRS Report, Near East and South Asia.

DTIC Science & Technology

1991-07-08

and our culture. We collaborators two excellent connoisseurs of Berber lan- are not going to play at being censors ," Ramdane adds. guage and culture, T...its conceived plan, wars will be started between countries propaganda war, America censored war coverage. The for their consumption. There is only one...way to avoid Western media which protested censor restrictions this new international imperialist system and that is, just imposed during the

A management approach that drives actions strategically: balanced scorecard in a mental health trust case study.

PubMed

Schmidt, Stefan; Bateman, Ian; Breinlinger-O'Reilly, Jochen; Smith, Peter

2006-01-01

Achieving excellence is a current preoccupation in U.K. public health organisations. This article aims to use a case study to explain how a mental health trust delivers excellent performance using a balanced scorecard (BSC) management approach. Reports a project to implement a BSC approach in the South West Yorkshire Mental Health NHS Trust to achieve its "excellence" objectives. The authors were participants in the project. The design of the pilot project was informed theoretically by the work of Kaplan and Norton and practically by in-house discussions on a strategy to achieve excellence. Explains the process of building a BSC strategy step-by-step. Discusses how the vision and strategies of a mental health trust can be translated into tangible measures, which are the basis for actions that are driven strategically. There are many possibilities for a BSC management approach and this case study is specific to mental health trusts in the UK, although it is believed that the case has a universally applicable modus operandi. This article will help healthcare managers to evaluate the benefits of a BSC management approach. This article explains how actions can be structured in connection with a BSC management approach.

Solo Parenting: Raising Strong & Happy Families.

ERIC Educational Resources Information Center

Chambers, Diane

One quarter of all American children will live in a single-parent family for at least some portion of their childhood. This guide, organized as a step-by-step process, encourages single parents to reach for excellence in their parenting and to build confidence in their ability to raise healthy, responsible children. The chapters are intended to…

Effect of the accountable care act of 2010 on clinical trial insurance coverage.

PubMed

Kircher, Sheetal M; Benson, Al B; Farber, Matthew; Nimeiri, Halla S

2012-02-10

The Affordable Care Act (ACA) of 2010 implemented dramatic changes in our health care system. The new law requires that insurers and health plans provide coverage for individuals participating in clinical trials. Currently, there are states that already have laws or agreements requiring clinical trial coverage, but there remain deficiencies that will need to be addressed to achieve compliance with the new law. State mandates were reviewed to determine current laws and agreements. The ACA was reviewed to outline its provisions, and these were compared with current mandates to identify deficiencies. Eighteen states meet the requirements set forth by the ACA either through a state law or agreement; 33 states do not meet the requirements. Of these 33 states, 15 do not have any existing laws or agreements in place regarding clinical trials. In states that have deficient policies in place, the most common deficiency is the lack of phase I coverage. The second most common deficiency in policy is coverage of only therapeutic studies. Most states currently do not meet the requirements of the ACA and will be required to make changes by 2014. The implications of the ACA with regard to insurance coverage of clinical trials remain unclear as implementation of the legislation unfolds. State governments can take steps to ensure insurance coverage by creating and expanding agreements with insurance companies.

Nanopatterning of Si(001) for bottom-up fabrication of nanostructures.

PubMed

Hu, Yanfang; Kalachahi, Hedieh Hosseinzadeh; Das, Amal K; Koch, Reinhold

2012-04-27

The epitaxial growth of Si on Si(001) under conditions at which the (2 × n) superstructure is forming has been investigated by scanning tunneling microscopy and Monte Carlo simulations. Our experiments reveal a periodic change of the surface morphology with the surface coverage of Si. A regular (2 × n) stripe pattern is observed at coverages of 0.7-0.9 monolayers that periodically alternates with less dense surface structures at lower Si surface coverages. The MC simulations show that the growth of Si is affected by step-edge barriers, which favors the formation of a rather uniform two-dimensional framework-like configuration. Subsequent deposition of Ge onto the (2 × n) stripe pattern yields a dense array of small Ge nanostructures.

Dynamic Monte Carlo Simulations of Phase Ordering in Br Electrosorption on Ag(100)

NASA Astrophysics Data System (ADS)

Mitchell, S. J.; Brown, G.; Rikvold, P. A.

2000-03-01

We study the dynamics of Br electrosorption on single-crystal Ag(100) by Monte Carlo simulation. The system has a second-order phase transition from a low-coverage disordered phase at more negative potentials to a doubly degenerate c(2× 2) ordered phase at more positive potentials.(B.M. Ocko, et al.), Phys. Rev. Lett. 79, 1511 (1997). Effective lateral interactions were estimated by fitting equilibrium Monte Carlo isotherms to experiments. These are well described by nearest-neighbor exclusion and repulsive 1/r^3 interactions.(M.T.M. Koper, J. Electroanal. Chem. 450), 189 (1997). Considering adsorption/desorption and diffusion with barriers estimated from ab-initio calculations,(A. Ignaczak and J.A.N.F. Gomes, J. Electroanal. Chem. 420), 71 (1997). we simulate the time dependent Br coverage, order parameter, and x-ray scattering intensity following sudden potential steps across the phase boundary. For steps far into the ordered phase, dynamical scaling is observed. For smaller steps, the dynamics are more complicated. We also analyze hysteresis in a simulated cyclic-voltammetry experiment. Movies at http://www.scri.fsu.edu/ ~mitchell/.

Ultraviolet-ozone surface modification for non-wetting hole transport materials based inverted planar perovskite solar cells with efficiency exceeding 18%

NASA Astrophysics Data System (ADS)

Xu, Xiuwen; Ma, Chunqing; Cheng, Yuanhang; Xie, Yue-Min; Yi, Xueping; Gautam, Bhoj; Chen, Shengmei; Li, Ho-Wa; Lee, Chun-Sing; So, Franky; Tsang, Sai-Wing

2017-08-01

Non-wetting hole transport materials (HTMs) have great potential in facilitating large-sized perovskite crystal growth and enhancing device stability by opposing moisture ingress, However, the severe non-wetting issue limits the wide application of these materials in low-temperature solution-processed inverted planar perovskite solar cells (PVSCs), and corresponding devices are rarely reported. Here, a facile ultraviolet-ozone (UVO) modification method is demonstrated to overcome this issue. By carefully controlling the UVO modification time, the surface wettability of poly-TPD can be tuned without affecting the bulk properties of the film, hence perovskite films with desired grain size and excellent coverage can be deposited via a one-step spin-coating method. Benefiting from the high-quality perovskite, well-matched energy level alignment and hydrophobic property of poly-TPD, the resulting PVSCs show a champion power conversion efficiency of 18.19% with significantly enhanced stability as compared to the PEDOT:PSS counterparts. Moreover, the UVO modification approach also demonstrates its validity when being extended to other hydrophobic HTMs. This work not only provides a general strategy to broaden the selection pool of HTMs for solution-processed inverted planar PVSCs, but also may triggers the exploration of more advanced strategies to make non-wetting HTMs applicable in solution-processed inverted planar PVSCs.

Tissue phosphoproteomics with PolyMAC identifies potential therapeutic targets in a transgenic mouse model of HER2 positive breast cancer

PubMed Central

Searleman, Adam C.; Iliuk, Anton B.; Collier, Timothy S.; Chodosh, Lewis A.; Tao, W. Andy; Bose, Ron

2014-01-01

Altered protein phosphorylation is a feature of many human cancers that can be targeted therapeutically. Phosphopeptide enrichment is a critical step for maximizing the depth of phosphoproteome coverage by MS, but remains challenging for tissue specimens because of their high complexity. We describe the first analysis of a tissue phosphoproteome using polymer-based metal ion affinity capture (PolyMAC), a nanopolymer that has excellent yield and specificity for phosphopeptide enrichment, on a transgenic mouse model of HER2-driven breast cancer. By combining phosphotyrosine immunoprecipitation with PolyMAC, 411 unique peptides with 139 phosphotyrosine, 45 phosphoserine, and 29 phosphothreonine sites were identified from five LC-MS/MS runs. Combining reverse phase liquid chromatography fractionation at pH 8.0 with PolyMAC identified 1571 unique peptides with 1279 phosphoserine, 213 phosphothreonine, and 21 phosphotyrosine sites from eight LC-MS/MS runs. Linear motif analysis indicated that many of the phosphosites correspond to well-known phosphorylation motifs. Analysis of the tyrosine phosphoproteome with the Drug Gene Interaction database uncovered a network of potential therapeutic targets centered on Src family kinases with inhibitors that are either FDA-approved or in clinical development. These results demonstrate that PolyMAC is well suited for phosphoproteomic analysis of tissue specimens. PMID:24723360

FEHBP Dependent Coverage Extension Act

THOMAS, 111th Congress

Sen. Cardin, Benjamin L. [D-MD

2010-05-11

Senate - 06/30/2010 Committee on Homeland Security and Governmental Affairs referred to Subcommittee on Oversight of Government Management, the Federal Workforce, and the District of Columbia. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

University-Based Teleradiology in the United States.

PubMed

Hunter, Tim B; Krupinski, Elizabeth A

2014-04-15

This article reviews the University of Arizona's more than 15 years of experience with teleradiology and provides an overview of university-based teleradiology practice in the United States (U.S.). In the U.S., teleradiology is a major economic enterprise with many private for-profit companies offering national teleradiology services (i.e., professional interpretation of radiologic studies of all types by American Board of Radiology certified radiologists). The initial thrust for teleradiology was for after-hours coverage of radiologic studies, but teleradiology has expanded its venue to include routine full-time or partial coverage for small hospitals, clinics, specialty medical practices, and urgent care centers. It also provides subspecialty radiologic coverage not available at smaller medical centers and clinics. Many U.S. university-based academic departments of radiology provide teleradiology services usually as an additional for-profit business to supplement departmental income. Since academic-based teleradiology providers have to compete in a very demanding marketplace, their success is not guaranteed. They must provide timely, high-quality professional services for a competitive price. Academic practices have the advantage of house officers and fellows who can help with the coverage, and they have excellent subspecialty expertise. The marketplace is constantly shifting, and university-based teleradiology practices have to be nimble and adjust to ever-changing situations.

Planning Coverage Campaigns for Mission Design and Analysis: CLASP for DESDynl

NASA Technical Reports Server (NTRS)

Knight, Russell L.; McLaren, David A.; Hu, Steven

2013-01-01

Mission design and analysis presents challenges in that almost all variables are in constant flux, yet the goal is to achieve an acceptable level of performance against a concept of operations, which might also be in flux. To increase responsiveness, automated planning tools are used that allow for the continual modification of spacecraft, ground system, staffing, and concept of operations, while returning metrics that are important to mission evaluation, such as area covered, peak memory usage, and peak data throughput. This approach was applied to the DESDynl mission design using the CLASP planning system, but since this adaptation, many techniques have changed under the hood for CLASP, and the DESDynl mission concept has undergone drastic changes. The software produces mission evaluation products, such as memory highwater marks, coverage percentages, given a mission design in the form of coverage targets, concept of operations, spacecraft parameters, and orbital parameters. It tries to overcome the lack of fidelity and timeliness of mission requirements coverage analysis during mission design. Previous techniques primarily use Excel in ad hoc fashion to approximate key factors in mission performance, often falling victim to overgeneralizations necessary in such an adaptation. The new program allows designers to faithfully represent their mission designs quickly, and get more accurate results just as quickly.

Self-scheduling with Microsoft Excel.

PubMed

Irvin, S A; Brown, H N

1999-01-01

Excessive time was being spent by the emergency department (ED) staff, head nurse, and unit secretary on a complex 6-week manual self-scheduling system. This issue, plus inevitable errors and staff dissatisfaction, resulted in a manager-lead initiative to automate elements of the scheduling process using Microsoft Excel. The implementation of this initiative included: common coding of all 8-hour and 12-hour shifts, with each 4-hour period represented by a cell; the creation of a 6-week master schedule using the "count-if" function of Excel based on current staffing guidelines; staff time-off requests then entered by the department secretary; the head nurse, with staff input, then fine-tuned the schedule to provide even unit coverage. Outcomes of these changes included an increase in staff satisfaction, time saved by the head nurse, and staff work time saved because there was less arguing about the schedule. Ultimately, the automated self-scheduling method was expanded to the entire 700-bed hospital.

Management of gingival recession with acellular dermal matrix graft: A clinical study

PubMed Central

Balaji, V. R.; Ramakrishnan, T.; Manikandan, D.; Lambodharan, R.; Karthikeyan, B.; Niazi, Thanvir Mohammed; Ulaganathan, G.

2016-01-01

Aims and Objectives: Obtaining root coverage has become an important part of periodontal therapy. The aims of this studyare to evaluate the clinical efficacy of acellular dermal matrix graft in the coverage of denuded roots and also to examine the change in the width of keratinized gingiva. Materials and Methods: A total of 20 sites with more than or equal to 2 mm of recession depth were taken into the study, for treatment with acellular dermal matrix graft. The clinical parameters such as recession depth, recession width, width of keratinized gingiva, probing pocket depth (PD), and clinical attachment level (CAL) were measured at the baseline, 8th week, and at the end of the study (16th week). The defects were treated with a coronally positioned pedicle graft combined with acellular dermal matrix graft. Results: Out of 20 sites treated with acellular dermal matrix graft, seven sites showed complete root coverage (100%), and the mean root coverage obtained was 73.39%. There was a statistically significant reduction in recession depth, recession width, and probing PD. There was also a statistically significant increase in width of keratinized gingiva and also gain in CAL. The postoperative results were both clinically and statistically significant (P < 0.0001). Conclusion: The results of this study were esthetically acceptable to the patients and clinically acceptable in all cases. From this study, it may be concluded that acellular dermal matrix graft is an excellent substitute for autogenous graft in coverage of denuded roots. PMID:27829749

Kinetic aspects of chain growth in Fischer-Tropsch synthesis.

PubMed

Filot, Ivo A W; Zijlstra, Bart; Broos, Robin J P; Chen, Wei; Pestman, Robert; Hensen, Emiel J M

2017-04-28

Microkinetics simulations are used to investigate the elementary reaction steps that control chain growth in the Fischer-Tropsch reaction. Chain growth in the FT reaction on stepped Ru surfaces proceeds via coupling of CH and CR surface intermediates. Essential to the growth mechanism are C-H dehydrogenation and C hydrogenation steps, whose kinetic consequences have been examined by formulating two novel kinetic concepts, the degree of chain-growth probability control and the thermodynamic degree of chain-growth probability control. For Ru the CO conversion rate is controlled by the removal of O atoms from the catalytic surface. The temperature of maximum CO conversion rate is higher than the temperature to obtain maximum chain-growth probability. Both maxima are determined by Sabatier behavior, but the steps that control chain-growth probability are different from those that control the overall rate. Below the optimum for obtaining long hydrocarbon chains, the reaction is limited by the high total surface coverage: in the absence of sufficient vacancies the CHCHR → CCHR + H reaction is slowed down. Beyond the optimum in chain-growth probability, CHCR + H → CHCHR and OH + H → H 2 O limit the chain-growth process. The thermodynamic degree of chain-growth probability control emphasizes the critical role of the H and free-site coverage and shows that at high temperature, chain depolymerization contributes to the decreased chain-growth probability. That is to say, during the FT reaction chain growth is much faster than chain depolymerization, which ensures high chain-growth probability. The chain-growth rate is also fast compared to chain-growth termination and the steps that control the overall CO conversion rate, which are O removal steps for Ru.

A difference in using atomic layer deposition or physical vapour deposition TiN as electrode material in metal-insulator-metal and metal-insulator-silicon capacitors.

PubMed

Groenland, A W; Wolters, R A M; Kovalgin, A Y; Schmitz, J

2011-09-01

In this work, metal-insulator-metal (MIM) and metal-insulator-silicon (MIS) capacitors are studied using titanium nitride (TiN) as the electrode material. The effect of structural defects on the electrical properties on MIS and MIM capacitors is studied for various electrode configurations. In the MIM capacitors the bottom electrode is a patterned 100 nm TiN layer (called BE type 1), deposited via sputtering, while MIS capacitors have a flat bottom electrode (called BE type 2-silicon substrate). A high quality 50-100 nm thick SiO2 layer, made by inductively-coupled plasma CVD at 150 degrees C, is deposited as a dielectric on top of both types of bottom electrodes. BE type 1 (MIM) capacitors have a varying from low to high concentration of structural defects in the SiO2 layer. BE type 2 (MIS) capacitors have a low concentration of structural defects and are used as a reference. Two sets of each capacitor design are fabricated with the TiN top electrode deposited either via physical vapour deposition (PVD, i.e., sputtering) or atomic layer deposition (ALD). The MIM and MIS capacitors are electrically characterized in terms of the leakage current at an electric field of 0.1 MV/cm (I leak) and for different structural defect concentrations. It is shown that the structural defects only show up in the electrical characteristics of BE type 1 capacitors with an ALD TiN-based top electrode. This is due to the excellent step coverage of the ALD process. This work clearly demonstrates the sensitivity to process-induced structural defects, when ALD is used as a step in process integration of conductors on insulation materials.

D-Amino acid oxidase bio-functionalized platforms: Toward an enhanced enzymatic bio-activity

NASA Astrophysics Data System (ADS)

Herrera, Elisa; Valdez Taubas, Javier; Giacomelli, Carla E.

2015-11-01

The purpose of this work is to study the adsorption process and surface bio-activity of His-tagged D-amino acid oxidase (DAAO) from Rhodotorula gracilis (His6-RgDAAO) as the first step for the development of an electrochemical bio-functionalized platform. With such a purpose this work comprises: (a) the His6-RgDAAO bio-activity in solution determined by amperometry, (b) the adsorption mechanism of His6-RgDAAO on bare gold and carboxylated modified substrates in the absence (substrate/COO-) and presence of Ni(II) (substrate/COO- + Ni(II)) determined by reflectometry, and (c) the bio-activity of the His6-RgDAAO bio-functionalized platforms determined by amperometry. Comparing the adsorption behavior and bio-activity of His6-RgDAAO on these different solid substrates allows understanding the contribution of the diverse interactions responsible for the platform performance. His6-RgDAAO enzymatic performance in solution is highly improved when compared to the previously used pig kidney (pk) DAAO. His6-RgDAAO exhibits an amperometrically detectable bio-activity at concentrations as low as those expected on a bio-functional platform; hence, it is a viable bio-recognition element of D-amino acids to be coupled to electrochemical platforms. Moreover, His6-RgDAAO bio-functionalized platforms exhibit a higher surface activity than pkDAAO physically adsorbed on gold. The platform built on Ni(II) modified substrates present enhanced bio-activity because the surface complexes histidine-Ni(II) provide with site-oriented, native-like enzymes. The adsorption mechanism responsible of the excellent performance of the bio-functionalized platform takes place in two steps involving electrostatic and bio-affinity interactions whose prevalence depends on the degree of surface coverage.

A database for propagation models

NASA Technical Reports Server (NTRS)

Kantak, Anil V.; Suwitra, Krisjani; Le, Chuong

1995-01-01

A database of various propagation phenomena models that can be used by telecommunications systems engineers to obtain parameter values for systems design is presented. This is an easy-to-use tool and is currently available for either a PC using Excel software under Windows environment or a Macintosh using Excel software for Macintosh. All the steps necessary to use the software are easy and many times self explanatory.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, Yao; Chen, Josephine; Leary, Celeste I.

Radiation of the low neck can be accomplished using split-field intensity-modulated radiation therapy (sf-IMRT) or extended-field intensity-modulated radiation therapy (ef-IMRT). We evaluated the effect of these treatment choices on target coverage and thyroid and larynx doses. Using data from 14 patients with cancers of the oropharynx, we compared the following 3 strategies for radiating the low neck: (1) extended-field IMRT, (2) traditional split-field IMRT with an initial cord-junction block to 40 Gy, followed by a full-cord block to 50 Gy, and (3) split-field IMRT with a full-cord block to 50 Gy. Patients were planned using each of these 3 techniques.more » To facilitate comparison, extended-field plans were normalized to deliver 50 Gy to 95% of the neck volume. Target coverage was assessed using the dose to 95% of the neck volume (D{sub 95}). Mean thyroid and larynx doses were computed. Extended-field IMRT was used as the reference arm; the mean larynx dose was 25.7 ± 7.4 Gy, and the mean thyroid dose was 28.6 ± 2.4 Gy. Split-field IMRT with 2-step blocking reduced laryngeal dose (mean larynx dose 15.2 ± 5.1 Gy) at the cost of a moderate reduction in target coverage (D{sub 95} 41.4 ± 14 Gy) and much higher thyroid dose (mean thyroid dose 44.7 ± 3.7 Gy). Split-field IMRT with initial full-cord block resulted in greater laryngeal sparing (mean larynx dose 14.2 ± 5.1 Gy) and only a moderately higher thyroid dose (mean thyroid dose 31 ± 8 Gy) but resulted in a significant reduction in target coverage (D{sub 95} 34.4 ± 15 Gy). Extended-field IMRT comprehensively covers the low neck and achieves acceptable thyroid and laryngeal sparing. Split-field IMRT with a full-cord block reduces laryngeal doses to less than 20 Gy and spares the thyroid, at the cost of substantially reduced coverage of the low neck. Traditional 2-step split-field IMRT similarly reduces the laryngeal dose but also reduces low-neck coverage and delivers very high doses to the thyroid.« less

Design and coverage of high throughput genotyping arrays optimized for individuals of East Asian, African American, and Latino race/ethnicity using imputation and a novel hybrid SNP selection algorithm.

PubMed

Hoffmann, Thomas J; Zhan, Yiping; Kvale, Mark N; Hesselson, Stephanie E; Gollub, Jeremy; Iribarren, Carlos; Lu, Yontao; Mei, Gangwu; Purdy, Matthew M; Quesenberry, Charles; Rowell, Sarah; Shapero, Michael H; Smethurst, David; Somkin, Carol P; Van den Eeden, Stephen K; Walter, Larry; Webster, Teresa; Whitmer, Rachel A; Finn, Andrea; Schaefer, Catherine; Kwok, Pui-Yan; Risch, Neil

2011-12-01

Four custom Axiom genotyping arrays were designed for a genome-wide association (GWA) study of 100,000 participants from the Kaiser Permanente Research Program on Genes, Environment and Health. The array optimized for individuals of European race/ethnicity was previously described. Here we detail the development of three additional microarrays optimized for individuals of East Asian, African American, and Latino race/ethnicity. For these arrays, we decreased redundancy of high-performing SNPs to increase SNP capacity. The East Asian array was designed using greedy pairwise SNP selection. However, removing SNPs from the target set based on imputation coverage is more efficient than pairwise tagging. Therefore, we developed a novel hybrid SNP selection method for the African American and Latino arrays utilizing rounds of greedy pairwise SNP selection, followed by removal from the target set of SNPs covered by imputation. The arrays provide excellent genome-wide coverage and are valuable additions for large-scale GWA studies. Copyright © 2011 Elsevier Inc. All rights reserved.

GT3X+ accelerometer placement affects the reliability of step-counts measured during running and pedal-revolution counts measured during bicycling.

PubMed

Gatti, Anthony A; Stratford, Paul W; Brenneman, Elora C; Maly, Monica R

2016-01-01

Accelerometers provide a measure of step-count. Reliability and validity of step-count and pedal-revolution count measurements by the GT3X+ accelerometer, placed at different anatomical locations, is absent in the literature. The purpose of this study was to investigate the reliability and validity of step and pedal-revolution counts produced by the GT3X+ placed at different anatomical locations during running and bicycling. Twenty-two healthy adults (14 men and 8 women) completed running and bicycling activity bouts (5 minutes each) while wearing 6 accelerometers: 2 each at the waist, thigh and shank. Accelerometer and video data were collected during activity. Excellent reliability and validity were found for measurements taken from accelerometers mounted at the waist and shank during running (Reliability: intraclass correlation (ICC) ≥ 0.99; standard error of measurement (SEM) ≤1.0 steps; Pearson ≥ 0.99) and at the thigh and shank during bicycling (Reliability: ICC ≥ 0.99; SEM ≤1.0 revolutions; Pearson ≥ 0.99). Excellent reliability was found between measurements taken at the waist and shank during running (ICC ≥ 0.98; SEM ≤1.6 steps) and between measurements taken at the thigh and shank during bicycling (ICC ≥ 0.99; SEM ≤1.0 revolutions). These data suggest that the GT3X+ can be used for measuring step-count during running and pedal-revolution count during bicycling. Only shank placement is recommended for both activities.

Leading the Common Core State Standards: From Common Sense to Common Practice

ERIC Educational Resources Information Center

Dunkle, Cheryl A.

2012-01-01

Many educators agree that we already know how to foster student success, so what is keeping common sense from becoming common practice? The author provides step-by-step guidance for overcoming the barriers to adopting the Common Core State Standards (CCSS) and achieving equity and excellence for all students. As an experienced teacher and…

Interobserver Agreement in Clinical Grading of Vitreous Haze Using Alternative Grading Scales

PubMed Central

Hornbeak, Dana M; Payal, Abhishek; Pistilli, Maxwell; Biswas, Jyotirmay; Ganesh, Sudha K; Gupta, Vishali; Rathinam, Sivakumar R; Davis, Janet L; Kempen, John H

2014-01-01

Purpose To evaluate the reliability of clinical grading of vitreous haze using a new 9-step ordinal scale vs. the existing 6-step ordinal scale. Design Evaluation of Diagnostic Test (interobserver agreement study). Participants 119 consecutive patients (204 uveitic eyes) presenting for uveitis subspecialty care on the study day at one of three large uveitis centers. Methods Five pairs of uveitis specialists clinically graded vitreous haze in the same eyes, one after the other using the same equipment, using the 6- and 9-step scales. Main Outcome Measures Agreement in vitreous haze grade between each pair of specialists was evaluated by the κ statistic (exact agreement and agreement within one or two grades). Results The scales correlated well (Spearman’s ρ=0.84). Exact agreement was modest using both the 6-step and 9-step scales: average κ=0.46 (range 0.28–0.81) and κ=0.40 (range 0.15–0.63), respectively. Within-1-grade agreement was slightly more favorable for the scale with fewer steps, but values were excellent for both scales: κ=0.75 (range 0.66–0.96) and κ=0.62 (range 0.38–0.87), respectively. Within-2-grade agreement for the 9-step scale also was excellent [κ=0.85 (range 0.79–0.92)]. Two-fold more cases were potentially clinical trial eligible based on the 9- than the 6-step scale (p<0.001). Conclusions Both scales are sufficiently reproducible using clinical grading for clinical and research use with the appropriate threshold (a ≥2 and ≥3 step differences for the 6-step and 9-step scales respectively). The results suggest that more eyes are likely to meet eligibility criteria for trials using the 9-step scale. The 9-step scale appears to have higher reproducibility with Reading Center grading than clinical grading, suggesting Reading Center grading may be preferable for clinical trials. PMID:24697913

The 5As: A practical taxonomy for the determinants of vaccine uptake.

PubMed

Thomson, Angus; Robinson, Karis; Vallée-Tourangeau, Gaëlle

2016-02-17

Suboptimal vaccine uptake in both childhood and adult immunisation programs limits their full potential impact on global health. A recent progress review of the Global Vaccine Action Plan stated that "countries should urgently identify barriers and bottlenecks and implement targeted approaches to increase and sustain coverage". However, vaccination coverage may be determined by a complex mix of demographic, structural, social and behavioral factors. To develop a practical taxonomy to organise the myriad possible root causes of a gap in vaccination coverage rates, we performed a narrative review of the literature and tested whether all non-socio-demographic determinants of coverage could be organised into 4 dimensions: Access, Affordability, Awareness and Acceptance. Forty-three studies were reviewed, from which we identified 23 primary determinants of vaccination uptake. We identified a fifth domain, Activation, which captured interventions such as SMS reminders which effectively nudge people towards getting vaccinated. The 5As taxonomy captured all identified determinants of vaccine uptake. This intuitive taxonomy has already facilitated mutual understanding of the primary determinants of suboptimal coverage within inter-sectorial working groups, a first step towards them developing targeted and effective solutions. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

Uptake and timeliness of rotavirus vaccination in Norway: The first year post-introduction.

PubMed

Valcarcel Salamanca, Beatriz; Hagerup-Jenssen, Maria Elisabeth; Flem, Elmira

2016-09-07

To minimise vaccine-associated risk of intussusception following rotavirus vaccination, Norway adopted very strict age limits for initiating and completing the vaccine series at the time rotavirus vaccination was included in the national immunisation programme, October 2014. Although Norway has a high coverage for routine childhood vaccines, these stringent age limits could negatively affect rotavirus coverage. We documented the status and impact of rotavirus vaccination on other infant vaccines during the first year after its introduction. We used individual vaccination data from the national immunisation register to calculate coverage for rotavirus and other vaccines and examine adherence with the recommended schedules. We identified factors associated with completing the full rotavirus series by performing multiple logistic regression analyses. We also evaluated potential changes in uptake and timeliness of other routine vaccines after the introduction of rotavirus vaccine using the Kaplan-Meier method. The national coverage for rotavirus vaccine achieved a year after the introduction was 89% for one dose and 82% for two doses, respectively. Among fully rotavirus-vaccinated children, 98% received both doses within the upper age limit and 90% received both doses according to the recommended schedule. The child's age at the initiation of rotavirus series and being vaccinated with diphtheria, tetanus, pertussis, polio and Haemophilus influenzae type b (DTaP/IPV/Hib) and pneumococcal vaccines were the strongest predictors of completing the full rotavirus series. No major changes in uptake and timeliness of other paediatric vaccines were observed after introduction of rotavirus vaccine. Norway achieved a high national coverage and excellent adherence with the strict age limits for rotavirus vaccine administration during the first year of introduction, indicating robustness of the national immunisation programme. Rotavirus vaccination did not impact coverage or timeliness of other infant vaccines. Copyright © 2016. Published by Elsevier Ltd.

Adsorption behavior of Zn porphyrins on a (1 0 1) face of anatase TiO2

NASA Astrophysics Data System (ADS)

Zajac, Lukasz; Bodek, Lukasz; Such, Bartosz

2018-06-01

The adsorption behavior of porphyrin molecules on anatase TiO2(1 0 1) has been investigated with scanning tunneling microscopy (STM) in ultra-high vacuum (UHV) at room temperature. At low coverage, the ZnTPP molecules have a tendency to adsorb on the one type of step edges forming molecular chains. Due to relatively high mobility of molecules stable assemblies appear only close to a monolayer coverage. Zn porphyrins in self-assembled molecular domains form a commensurate structure. In-plane rotation of the molecules leads to formation of two domains of different chirality.

Unmanned Warfare: Second and Third Order Effects Stemming from the Afghan Operational Environment between 2001 and 2010

DTIC Science & Technology

2011-06-10

the very nature of warfare took a dramatic step into the future. With new assets capable of remaining airborne for nearly 24 hours and live video ...warfare took a dramatic step into the future. With new assets capable of remaining airborne for nearly 24 hours and live video feeds streaming to...shape the battlefield during protracted combat operations. From the real time video feeds, to the 24 hour coverage of an area of interest, tangible

Managing Access: Extending Medicaid to Children Through School-Based HMO Coverage

PubMed Central

Coulam, Robert F.; Irvin, Carol V.; Calore, Kathleen A.; Kidder, David E.; Rosenbach, Margo L.

1997-01-01

This study explores how a health maintenance organization's (HMO) capacity and incentives to manage care might be used to improve access. In the early 1990s, the Florida Healthy Kids (FHK) demonstration extended Medicaid-like HMO coverage to indigent children in the public schools of Volusia County, Florida. The study finds that uninsured student months in area public schools were likely reduced by one-half. Utilization and cost levels for these indigent enrollees proved to be indistinguishable from commercial clients; and measures of access, utilization, and satisfaction for enrollees were in line with (and in some cases, superior to) non-enrollees with private insurance. Overall, these results suggest the value of using schools as a medium for providing coverage, and the importance of taking deliberate steps to manage access to reduce non-financial barriers to care. PMID:10170346

Accuracy and Coverage of Diagnosis and Procedural Coding of Severely Injured Patients in the Finnish Hospital Discharge Register: Comparison to Patient Files and the Helsinki Trauma Registry.

PubMed

Heinänen, M; Brinck, T; Handolin, L; Mattila, V M; Söderlund, T

2017-09-01

The Finnish Hospital Discharge Register data are frequently used for research purposes. The Finnish Hospital Discharge Register has shown excellent validity in single injuries or disease groups, but no studies have assessed patients with multiple trauma diagnoses. We aimed to evaluate the accuracy and coverage of the Finnish Hospital Discharge Register but at the same time validate the data of the trauma registry of the Helsinki University Hospital's Trauma Unit. We assessed the accuracy and coverage of the Finnish Hospital Discharge Register data by comparing them to the original patient files and trauma registry files from the trauma registry of the Helsinki University Hospital's Trauma Unit. We identified a baseline cohort of patients with severe thorax injury from the trauma registry of the Helsinki University Hospital's Trauma Unit of 2013 (sample of 107 patients). We hypothesized that the Finnish Hospital Discharge Register would lack valuable information about these patients. Using patient files, we identified 965 trauma diagnoses in these 107 patients. From the Finnish Hospital Discharge Register, we identified 632 (65.5%) diagnoses and from the trauma registry of the Helsinki University Hospital's Trauma Unit, 924 (95.8%) diagnoses. A total of 170 (17.6%) trauma diagnoses were missing from the Finnish Hospital Discharge Register data and 41 (4.2%) from the trauma registry of the Helsinki University Hospital's Trauma Unit data. The coverage and accuracy of diagnoses in the Finnish Hospital Discharge Register were 65.5% (95% confidence interval: 62.5%-68.5%) and 73.8% (95% confidence interval: 70.4%-77.2%), respectively, and for the trauma registry of the Helsinki University Hospital's Trauma Unit, 95.8% (95% confidence interval: 94.5%-97.0%) and 97.6% (95% confidence interval: 96.7%-98.6%), respectively. According to patient records, these patients were subjects in 249 operations. We identified 40 (16.1%) missing operation codes from the Finnish Hospital Discharge Register and 19 (7.6%) from the trauma registry of the Helsinki University Hospital's Trauma Unit. The validity of the Finnish Hospital Discharge Register data is unsatisfactory in terms of the accuracy and coverage of diagnoses in patients with multiple trauma diagnoses. Procedural codes provide greater accuracy. We found the coverage and accuracy of the trauma registry of the Helsinki University Hospital's Trauma Unit to be excellent. Therefore, a special trauma registry, such as the trauma registry of the Helsinki University Hospital's Trauma Unit, provides much more accurate data and should be the preferred registry when extracting data for research or for administrative use, such as resource prioritizing.

A new one-step procedure for pulmonary valve implantation of the melody valve: Simultaneous prestenting and valve implantation.

PubMed

Boudjemline, Younes

2018-01-01

To describe a new modification, the one-step procedure, that allows interventionists to pre-stent and implant a Melody valve simultaneously. Percutaneous pulmonary valve implantation (PPVI) is the standard of care for managing patients with dysfunctional right ventricular outflow tract, and the approach is standardized. Patients undergoing PPVI using the one-step procedure were identified in our database. Procedural data and radiation exposure were compared to those in a matched group of patients who underwent PPVI using the conventional two-step procedure. Between January 2016 and January 2017, PPVI was performed in 27 patients (median age/range, 19.1/10-55 years) using the one-step procedure involving manual crimping of one to three bare metal stents over the Melody valve. The stent and Melody valve were delivered successfully using the Ensemble delivery system. No complications occurred. All patients had excellent hemodynamic results (median/range post-PPVI right ventricular to pulmonary artery gradient, 9/0-20 mmHg). Valve function was excellent. Median procedural and fluoroscopic times were 56 and 10.2 min, respectively, which significantly differed from those of the two-step procedure group. Similarly, the dose area product (DAP), and radiation time were statistically lower in the one-step group than in the two-step group (P < 0.001 for all variables). After a median follow-up of 8 months (range, 3-14.7), no patient underwent reintervention, and no device dysfunction was observed. The one-step procedure is a safe modification that allows interventionists to prestent and implants the Melody valve simultaneously. It significantly reduces procedural and fluoroscopic times, and radiation exposure. © 2017 Wiley Periodicals, Inc.

DidFail: Coverage and Precision Enhancement

DTIC Science & Technology

2017-07-07

Android developer website [4] for a detailed description of these methods. To test this approach, we developed two example apps with different complexities...broadcast receivers by performing an extra analytical step to find dynamic receivers and append descriptions of them to the manifest file before the data

Exploring the Arabidopsis proteome: influence of protein solubilization buffers on proteome coverage.

PubMed

Marondedze, Claudius; Wong, Aloysius; Groen, Arnoud; Serrano, Natalia; Jankovic, Boris; Lilley, Kathryn; Gehring, Christoph; Thomas, Ludivine

2014-12-31

The study of proteomes provides new insights into stimulus-specific responses of protein synthesis and turnover, and the role of post-translational modifications at the systems level. Due to the diverse chemical nature of proteins and shortcomings in the analytical techniques used in their study, only a partial display of the proteome is achieved in any study, and this holds particularly true for plant proteomes. Here we show that different solubilization and separation methods have profound effects on the resulting proteome. In particular, we observed that the type of detergents employed in the solubilization buffer preferentially enriches proteins in different functional categories. These include proteins with a role in signaling, transport, response to temperature stimuli and metabolism. This data may offer a functional bias on comparative analysis studies. In order to obtain a broader coverage, we propose a two-step solubilization protocol with first a detergent-free buffer and then a second step utilizing a combination of two detergents to solubilize proteins.

A generalized theory of thin film growth

NASA Astrophysics Data System (ADS)

Du, Feng; Huang, Hanchen

2018-03-01

This paper reports a theory of thin film growth that is generalized for arbitrary incidence angle during physical vapor deposition in two dimensions. The accompanying kinetic Monte Carlo simulations serve as verification. A special theory already exists for thin film growth with zero incidence angle, and another theory also exists for nanorod growth with a glancing angle. The theory in this report serves as a bridge to describe the transition from thin film growth to nanorod growth. In particular, this theory gives two critical conditions in analytical form of critical coverage, ΘI and ΘII. The first critical condition defines the onset when crystal growth or step dynamics stops following the wedding cake model for thin film growth. The second critical condition defines the onset when multiple-layer surface steps form to enable nanorod growth. Further, this theory also reveals a critical incidence angle, below which nanorod growth is impossible. The critical coverages, together with the critical incidence angle, defines a phase diagram of thin growth versus nanorod growth.

Network structure control of binary mixed langmuir monolayers of homo-PS and PS-b-P2VP.

PubMed

Wen, Gangyao

2010-03-25

Our recent work showed there existed a composition window for mixed Langmuir monolayers of homopolystyrene (h-PS) and a symmetric diblock copolymer polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) to form necklace-network structures at the air/water interface. In order to study further the possible mechanism and control the network structure (i.e., surface coverage and nanoaggregate diameter), effects of spreading solution concentration and volume, subphase temperature, and transfer pressure on the network structure were studied by the Langmuir monolayer technique and tapping mode atomic force microscopy. With the increase of transfer pressure, there existed a novel nonlinear behavior for the nanoaggregate diameter first to increase, then to decrease, and finally to increase again, while the surface coverage tended to increase step by step. Moreover, with the elevation of temperature, chain motion between the adjoining nanoaggregates tended to be improved and thus the nanoaggregate diameter tended to be more uniform.

Exploring the Arabidopsis Proteome: Influence of Protein Solubilization Buffers on Proteome Coverage

PubMed Central

Marondedze, Claudius; Wong, Aloysius; Groen, Arnoud; Serrano, Natalia; Jankovic, Boris; Lilley, Kathryn; Gehring, Christoph; Thomas, Ludivine

2014-01-01

The study of proteomes provides new insights into stimulus-specific responses of protein synthesis and turnover, and the role of post-translational modifications at the systems level. Due to the diverse chemical nature of proteins and shortcomings in the analytical techniques used in their study, only a partial display of the proteome is achieved in any study, and this holds particularly true for plant proteomes. Here we show that different solubilization and separation methods have profound effects on the resulting proteome. In particular, we observed that the type of detergents employed in the solubilization buffer preferentially enriches proteins in different functional categories. These include proteins with a role in signaling, transport, response to temperature stimuli and metabolism. This data may offer a functional bias on comparative analysis studies. In order to obtain a broader coverage, we propose a two-step solubilization protocol with first a detergent-free buffer and then a second step utilizing a combination of two detergents to solubilize proteins. PMID:25561235

Fractional nonablative laser resurfacing: is there a skin tightening effect?

PubMed

Kauvar, Arielle N B

2014-12-01

Fractional photothermolysis, an approach to laser skin resurfacing that creates microscopic thermal wounds in skin separated by islands of spared tissue, was developed to overcome the high incidence of adverse events and prolonged healing times associated with full coverage ablative laser procedures. To examine whether fractional nonablative laser resurfacing induces skin tightening. A literature review was performed to evaluate the clinical and histologic effects of fractional nonablative laser resurfacing and full coverage ablative resurfacing procedures. Fractional nonablative lasers produce excellent outcomes with minimal risk and morbidity for a variety of clinical conditions, including photodamaged skin, atrophic scars, surgical and burn scars. Efforts to induce robust fibroplasia in histologic specimens and skin tightening in the clinical setting have yielded inconsistent results. A better understanding of the histology of fractional laser resurfacing will help to optimize clinical outcomes.

Statistical Power Analysis with Microsoft Excel: Normal Tests for One or Two Means as a Prelude to Using Non-Central Distributions to Calculate Power

ERIC Educational Resources Information Center

Texeira, Antonio; Rosa, Alvaro; Calapez, Teresa

2009-01-01

This article presents statistical power analysis (SPA) based on the normal distribution using Excel, adopting textbook and SPA approaches. The objective is to present the latter in a comparative way within a framework that is familiar to textbook level readers, as a first step to understand SPA with other distributions. The analysis focuses on the…

Chemoenzymatic one-pot synthesis in an aqueous medium: combination of metal-catalysed allylic alcohol isomerisation-asymmetric bioamination.

PubMed

Ríos-Lombardía, Nicolás; Vidal, Cristian; Cocina, María; Morís, Francisco; García-Álvarez, Joaquín; González-Sabín, Javier

2015-07-11

The ruthenium-catalysed isomerisation of allylic alcohols was coupled, for the first time, with asymmetric bioamination in a one-pot process in an aqueous medium. In the cases involving prochiral ketones, the ω-TA exhibited excellent enantioselectivity, identical to that observed in the single step. As a result, amines were obtained from allylic alcohols with high overall yields and excellent enantiomeric excesses.

WASP (Write a Scientific Paper) using Excel - 1: Data entry and validation.

PubMed

Grech, Victor

2018-02-01

Data collection for the purposes of analysis, after the planning and execution of a research study, commences with data input and validation. The process of data entry and analysis may appear daunting to the uninitiated, but as pointed out in the 1970s in a series of papers by British Medical Journal Deputy Editor TDV Swinscow, modern hardware and software (he was then referring to the availability of hand calculators) permits the performance of statistical testing outside a computer laboratory. In this day and age, modern software, such as the ubiquitous and almost universally familiar Microsoft Excel™ greatly facilitates this process. This first paper comprises the first of a collection of papers which will emulate Swinscow's series, in his own words, "addressed to readers who want to start at the beginning, not to those who are already skilled statisticians." These papers will have less focus on the actual arithmetic, and more emphasis on how to actually implement simple statistics, step by step, using Excel, thereby constituting the equivalent of Swinscow's papers in the personal computer age. Data entry can be facilitated by several underutilised features in Excel. This paper will explain Excel's little-known form function, data validation implementation at input stage, simple coding tips and data cleaning tools. Copyright © 2018 Elsevier B.V. All rights reserved.

EXCEL Act

THOMAS, 113th Congress

Sen. Landrieu, Mary L. [D-LA

2013-03-11

Senate - 09/10/2013 Placed on Senate Legislative Calendar under General Orders. Calendar No. 168. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Elucidation of Active Sites for the Reaction of Ethanol on TiO 2 /Au(111)

DOE PAGES

Boyle, David T.; Wilke, Jeremy A.; Palomino, Robert M.; ...

2017-03-17

Obtaining a molecular-level understanding of the reaction of alcohols with heterogeneous model catalysts is critical for improving industrial catalytic processes, such as the production of H 2 from alcohols. Gold has been shown to be an excellent oxidation catalyst once oxygen is added to it. The use of reducible oxides provides a source of oxygen on Au(111) for the reaction of ethanol, which is easily regenerated in the presence of an oxygen background. In this work, ethanol operates as a probe molecule to investigate the role of Au(111), TiO 2 nanoparticles, and TiO 2/Au interfacial surface sites on the catalyticmore » properties of TiO 2/Au(111). Ultrahigh vacuum temperature-programmed desorption (TPD) studies with ethanol/Au(111) elucidate previously unreported adsorption sites for ethanol. Ethanol molecularly adsorbs to Au terrace sites, step edges, and undercoordinated kink sites with adsorption energies of -51.7, -55.8, and -65.1 kJ/mol, respectively. In a TPD coverage study of ethanol on TiO 2/Au(111) indicates ethanol undergoes dissociative adsorption to form H*(a) and CH 3CH 2O*(a) on the inverse model catalyst surface. The desorption temperature of low coverages of ethanol from TiO2/Au(111) (Tdes ≈ 235 K) is at an intermediate temperature between the desorption temperatures from bulk Au(111) and TiO 2(110), indicating both Au and TiO 2 play a role in the adsorption of ethanol. Both low-temperature adsorption and high-temperature reactions are studied and indicate that ethanol-derived products such as acetaldehyde and ethylene desorb from TiO 2/Au(111) at ~500 K. Here, we report the identification of catalytically active sites on TiO 2/Au(111) as interfacial sites between the oxide and Au(111) surface through the use of temperature-programmed desorption and infrared reflection absorption spectroscopy.« less

Elucidation of Active Sites for the Reaction of Ethanol on TiO 2 /Au(111)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyle, David T.; Wilke, Jeremy A.; Palomino, Robert M.

Obtaining a molecular-level understanding of the reaction of alcohols with heterogeneous model catalysts is critical for improving industrial catalytic processes, such as the production of H 2 from alcohols. Gold has been shown to be an excellent oxidation catalyst once oxygen is added to it. The use of reducible oxides provides a source of oxygen on Au(111) for the reaction of ethanol, which is easily regenerated in the presence of an oxygen background. In this work, ethanol operates as a probe molecule to investigate the role of Au(111), TiO 2 nanoparticles, and TiO 2/Au interfacial surface sites on the catalyticmore » properties of TiO 2/Au(111). Ultrahigh vacuum temperature-programmed desorption (TPD) studies with ethanol/Au(111) elucidate previously unreported adsorption sites for ethanol. Ethanol molecularly adsorbs to Au terrace sites, step edges, and undercoordinated kink sites with adsorption energies of -51.7, -55.8, and -65.1 kJ/mol, respectively. In a TPD coverage study of ethanol on TiO 2/Au(111) indicates ethanol undergoes dissociative adsorption to form H*(a) and CH 3CH 2O*(a) on the inverse model catalyst surface. The desorption temperature of low coverages of ethanol from TiO2/Au(111) (Tdes ≈ 235 K) is at an intermediate temperature between the desorption temperatures from bulk Au(111) and TiO 2(110), indicating both Au and TiO 2 play a role in the adsorption of ethanol. Both low-temperature adsorption and high-temperature reactions are studied and indicate that ethanol-derived products such as acetaldehyde and ethylene desorb from TiO 2/Au(111) at ~500 K. Here, we report the identification of catalytically active sites on TiO 2/Au(111) as interfacial sites between the oxide and Au(111) surface through the use of temperature-programmed desorption and infrared reflection absorption spectroscopy.« less

One-step synthesis of amine-functionalized hollow mesoporous silica nanoparticles as efficient antibacterial and anticancer materials.

PubMed

Hao, Nanjing; Jayawardana, Kalana W; Chen, Xuan; Yan, Mingdi

2015-01-21

In this study, amine-functionalized hollow mesoporous silica nanoparticles with an average diameter of ∼100 nm and shell thickness of ∼20 nm were prepared by an one-step process. This new nanoparticulate system exhibited excellent killing efficiency against mycobacterial (M. smegmatis strain mc(2) 651) and cancer cells (A549).

EXCEL Act

THOMAS, 112th Congress

Sen. Landrieu, Mary L. [D-LA

2012-05-24

Senate - 05/24/2012 Read twice and referred to the Committee on Small Business and Entrepreneurship. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

CORNAS: coverage-dependent RNA-Seq analysis of gene expression data without biological replicates.

PubMed

Low, Joel Z B; Khang, Tsung Fei; Tammi, Martti T

2017-12-28

In current statistical methods for calling differentially expressed genes in RNA-Seq experiments, the assumption is that an adjusted observed gene count represents an unknown true gene count. This adjustment usually consists of a normalization step to account for heterogeneous sample library sizes, and then the resulting normalized gene counts are used as input for parametric or non-parametric differential gene expression tests. A distribution of true gene counts, each with a different probability, can result in the same observed gene count. Importantly, sequencing coverage information is currently not explicitly incorporated into any of the statistical models used for RNA-Seq analysis. We developed a fast Bayesian method which uses the sequencing coverage information determined from the concentration of an RNA sample to estimate the posterior distribution of a true gene count. Our method has better or comparable performance compared to NOISeq and GFOLD, according to the results from simulations and experiments with real unreplicated data. We incorporated a previously unused sequencing coverage parameter into a procedure for differential gene expression analysis with RNA-Seq data. Our results suggest that our method can be used to overcome analytical bottlenecks in experiments with limited number of replicates and low sequencing coverage. The method is implemented in CORNAS (Coverage-dependent RNA-Seq), and is available at https://github.com/joel-lzb/CORNAS .

CXTFIT/Excel A modular adaptable code for parameter estimation, sensitivity analysis and uncertainty analysis for laboratory or field tracer experiments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, Guoping; Mayes, Melanie; Parker, Jack C

2010-01-01

We implemented the widely used CXTFIT code in Excel to provide flexibility and added sensitivity and uncertainty analysis functions to improve transport parameter estimation and to facilitate model discrimination for multi-tracer experiments on structured soils. Analytical solutions for one-dimensional equilibrium and nonequilibrium convection dispersion equations were coded as VBA functions so that they could be used as ordinary math functions in Excel for forward predictions. Macros with user-friendly interfaces were developed for optimization, sensitivity analysis, uncertainty analysis, error propagation, response surface calculation, and Monte Carlo analysis. As a result, any parameter with transformations (e.g., dimensionless, log-transformed, species-dependent reactions, etc.) couldmore » be estimated with uncertainty and sensitivity quantification for multiple tracer data at multiple locations and times. Prior information and observation errors could be incorporated into the weighted nonlinear least squares method with a penalty function. Users are able to change selected parameter values and view the results via embedded graphics, resulting in a flexible tool applicable to modeling transport processes and to teaching students about parameter estimation. The code was verified by comparing to a number of benchmarks with CXTFIT 2.0. It was applied to improve parameter estimation for four typical tracer experiment data sets in the literature using multi-model evaluation and comparison. Additional examples were included to illustrate the flexibilities and advantages of CXTFIT/Excel. The VBA macros were designed for general purpose and could be used for any parameter estimation/model calibration when the forward solution is implemented in Excel. A step-by-step tutorial, example Excel files and the code are provided as supplemental material.« less

Lessons from Alternative Grading: Essential Qualities of Teacher Feedback

ERIC Educational Resources Information Center

Percell, Jay C.

2017-01-01

One critically important step in the instructional process is providing feedback to students, and yet, providing timely and thorough feedback is often lacking due attention. Reasons for this oversight could range from several factors including increased class sizes, vast content coverage requirements, extracurricular responsibilities, and the…

Helping Students Motivate Themselves: Practical Answers to Classroom Challenges

ERIC Educational Resources Information Center

Ferlazzo, Larry

2011-01-01

Give your students the tools they need to motivate themselves with tips from award-winning educator Larry Ferlazzo. A comprehensive outline of common classroom challenges, this book presents immediately applicable steps and lesson plans for all middle and high school teachers looking to help students motivate themselves. With coverage of…

Standards Handbook. Version 4.0. What Works Clearinghouse™

ERIC Educational Resources Information Center

What Works Clearinghouse, 2017

2017-01-01

The What Works Clearinghouse (WWC) systematic review process is the basis of many of its products, enabling the WWC to use consistent, objective, and transparent standards and procedures in its reviews, while also ensuring comprehensive coverage of the relevant literature. The WWC systematic review process consists of five steps: (1) Developing…

TRICARE Continuity of Coverage for National Guard and Reserve Families Act of 2009

THOMAS, 111th Congress

Rep. Latta, Robert E. [R-OH-5

2009-01-07

House - 01/30/2009 Referred to the Subcommittee on Military Personnel. (All Actions) Notes: For further action, see H.R.2647, which became Public Law 111-84 on 10/28/2009. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Type Ia supernova Hubble residuals and host-galaxy properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, A. G.; Aldering, G.; Aragon, C.

2014-03-20

Kim et al. introduced a new methodology for determining peak-brightness absolute magnitudes of type Ia supernovae from multi-band light curves. We examine the relation between their parameterization of light curves and Hubble residuals, based on photometry synthesized from the Nearby Supernova Factory spectrophotometric time series, with global host-galaxy properties. The K13 Hubble residual step with host mass is 0.013 ± 0.031 mag for a supernova subsample with data coverage corresponding to the K13 training; at <<1σ, the step is not significant and lower than previous measurements. Relaxing the data coverage requirement of the Hubble residual step with the host massmore » is 0.045 ± 0.026 mag for the larger sample; a calculation using the modes of the distributions, less sensitive to outliers, yields a step of 0.019 mag. The analysis of this article uses K13 inferred luminosities, as distinguished from previous works that use magnitude corrections as a function of SALT2 color and stretch parameters: steps at >2σ significance are found in SALT2 Hubble residuals in samples split by the values of their K13 x(1) and x(2) light-curve parameters. x(1) affects the light-curve width and color around peak (similar to the Δm {sub 15} and stretch parameters), and x(2) affects colors, the near-UV light-curve width, and the light-curve decline 20-30 days after peak brightness. The novel light-curve analysis, increased parameter set, and magnitude corrections of K13 may be capturing features of SN Ia diversity arising from progenitor stellar evolution.« less

A Practical Approach to Modified Condition/Decision Coverage

NASA Technical Reports Server (NTRS)

Hayhurst, Kelly J.; Veerhusem, Dan S.

2001-01-01

Testing of software intended for safety-critical applications in commercial transport aircraft must achieve modified condition/decision coverage (MC/DC) of the software structure. This requirement causes anxiety for many within the aviation software community. Results of a survey of the aviation software industry indicate that many developers believe that meeting the MC/DC requirement is difficult, and the cost is exorbitant. Some of the difficulties stem, no doubt, from the scant information available on the subject. This paper provides a practical 5-step approach for assessing MC/DC for aviation software products, and an analysis of some types of errors expected to be caught when MC/DC is achieved1.

Where does the insurance industry stand on health reform today?

PubMed

Bodaken, Bruce G

2008-01-01

With another national health care debate on the horizon, many assume that health plans will present a major source of opposition to universal coverage and other reforms. But a closer look reveals signs of change. Some plans continue their reflexive opposition to increasing government's role in health care; other plans have stepped forward to advocate meaningful reform. Experience in Massachusetts, California, Minnesota, and elsewhere suggests a clear lesson for policymakers. Sensible proposals and a genuine commitment to cooperation can not only neutralize opposition from a potentially powerful opponent, but can actually bring health plans on board to support coverage mandates, guaranteed issue, and other reforms.

Using microsoft excel applications in the graduate intern program at Goddard Space Flight Center. M.S. Thesis

NASA Technical Reports Server (NTRS)

Antoine, Lisa

1992-01-01

An outline of the Project Operations Branch at Goddard Space Flight Center is presented that describes the management of the division and each subgroup's responsibility. The paper further describes the development of software tools for the Macintosh personal computer, and their impending implementation. A detailed step by step procedure is given for using these software tools.

Using Correlational and Prediction Data to Enhance Student Achievement in K-12 Schools: A Practical Application for School Counselors

ERIC Educational Resources Information Center

Ware, William B.; Galassi, John P.

2006-01-01

Correlational data and regression analysis provide the school counselor with a method to describe growth in achievement test scores from elementary to high school. Using Microsoft Excel, this article shows the reader in a step-by-step manner how to describe this growth pattern and how to evaluate interventions that attempt to enhance achievement…

Sensitivity of Medication Use to Formulary Controls in Medicare Beneficiaries: A Review of the Literature

PubMed Central

Shenolikar, Rahul; Bruno, Amanda Schofield; Eaddy, Michael; Cantrell, Christopher

2011-01-01

Background Several studies have examined the impact of formulary management strategies on medication use in the elderly, but little has been done to synthesize the findings to determine whether the results show consistent trends. Objective To summarize the effects of formulary controls (ie, tiered copays, step edits, prior authorization, and generic substitution) on medication use in the Medicare population to inform future Medicare Part D and other coverage decisions. Methods This systematic review included research articles (found via PubMed, Google Scholar, and specific scientific journals) that evaluated the impact of drug coverage or cost-sharing on medication use in elderly (aged ≥65 years) Medicare beneficiaries. The impact of drug coverage was assessed by comparing patients with some drug coverage to those with no drug coverage or by comparing varying levels of drug coverage (eg, full coverage vs $1000 coverage or capped benefits vs noncapped benefits). Articles that were published before 1995, were not original empirical research, were published in languages other than English, or focused on populations other than Medicare beneficiaries were excluded. All studies selected were classified as positive, negative, or neutral based on the significance of the relationship (P <.05 or as otherwise specified) between the formulary control mechanism and the medication use, and on the direction of that relationship. Results Included were a total of 47 research articles (published between 1995 and 2009) that evaluated the impact of drug coverage or cost-sharing on medication use in Medicare beneficiaries. Overall, 24 studies examined the impact of the level of drug coverage on medication use; of these, 96% (N = 23) supported the association between better drug coverage (ie, branded and generic vs generic-only coverage, capped benefit vs noncapped benefit, supplemental drug insurance vs no supplemental drug insurance) or having some drug coverage and enhanced medication use. Furthermore, 84% (N = 16) of the 19 studies that examined the effect of cost-sharing on medication use demonstrated that decreased cost-sharing was significantly associated with improved medication use. Conclusion Current evidence from the literature suggests that restricting drug coverage or increasing out-of-pocket expenses for Medicare beneficiaries may lead to decreased medication use in the elderly, with all its potential implications. PMID:25126370

Equity in Excellence Act of 2010

THOMAS, 111th Congress

Rep. Payne, Donald M. [D-NJ-10

2010-06-23

House - 09/13/2010 Referred to the Subcommittee on Early Childhood, Elementary, and Secondary Education. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Growth to Excellence Act of 2013

THOMAS, 113th Congress

Rep. Polis, Jared [D-CO-2

2013-05-14

House - 07/08/2013 Referred to the Subcommittee on Early Childhood, Elementary, and Secondary Education. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Growth to Excellence Act of 2012

THOMAS, 112th Congress

Rep. Polis, Jared [D-CO-2

2012-01-31

House - 03/29/2012 Referred to the Subcommittee on Early Childhood, Elementary, and Secondary Education. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bockris, J.O.; Devanathan, M.A.V.

The galvanostatic double charging method was applied to determine the coverage of Ni cathodes with adsorbed atomic H in 2 N NaOH solutions. Anodic current densities were varied from 0.05 to 1.8 amp/sq cm. The plateau indicating absence of readsorption was between 0.6 and 1.8 amp/sq cm, for a constant cathodic c.d. of 1/10,000 amp/sq cm. The variation of the adsorbed H over cathodic c.d.'s ranging from 10 to the -6th power to 1/10 at a constant anodic c.d. of 1 amp/sq cm were calculated and the coverage calculated. The mechanism of the H evolution reaction was elucidated. The ratemore » determining step is discharge from a water molecules followed by rapid Tafel recombination. The rate constants for these processes and the rate constant for the ionisation, calculated with the extrapolated value of coverage for the reversible H electrode, were determined. A modification of the Tafel equation which takes into account both coverage and ionisation is in harmony with the results. A new method for the determination of coverage suitable for corrodible metals is described which involves the measurement of the rate of permeation of H by electrochemical techniques which enhances the sensitivity of the method. (Author)« less

Strategies to improve health coverage and narrow the equity gap in child survival, health, and nutrition.

PubMed

Chopra, Mickey; Sharkey, Alyssa; Dalmiya, Nita; Anthony, David; Binkin, Nancy

2012-10-13

Implementation of innovative strategies to improve coverage of evidence-based interventions, especially in the most marginalised populations, is a key focus of policy makers and planners aiming to improve child survival, health, and nutrition. We present a three-step approach to improvement of the effective coverage of essential interventions. First, we identify four different intervention delivery channels--ie, clinical or curative, outreach, community-based preventive or promotional, and legislative or mass media. Second, we classify which interventions' deliveries can be improved or changed within their channel or by switching to another channel. Finally, we do a meta-review of both published and unpublished reviews to examine the evidence for a range of strategies designed to overcome supply and demand bottlenecks to effective coverage of interventions that improve child survival, health, and nutrition. Although knowledge gaps exist, several strategies show promise for improving coverage of effective interventions-and, in some cases, health outcomes in children-including expanded roles for lay health workers, task shifting, reduction of financial barriers, increases in human-resource availability and geographical access, and use of the private sector. Policy makers and planners should be informed of this evidence as they choose strategies in which to invest their scarce resources. Copyright © 2012 Elsevier Ltd. All rights reserved.

Health-financing reforms in southeast Asia: challenges in achieving universal coverage.

PubMed

Tangcharoensathien, Viroj; Patcharanarumol, Walaiporn; Ir, Por; Aljunid, Syed Mohamed; Mukti, Ali Ghufron; Akkhavong, Kongsap; Banzon, Eduardo; Huong, Dang Boi; Thabrany, Hasbullah; Mills, Anne

2011-03-05

In this sixth paper of the Series, we review health-financing reforms in seven countries in southeast Asia that have sought to reduce dependence on out-of-pocket payments, increase pooled health finance, and expand service use as steps towards universal coverage. Laos and Cambodia, both resource-poor countries, have mostly relied on donor-supported health equity funds to reach the poor, and reliable funding and appropriate identification of the eligible poor are two major challenges for nationwide expansion. For Thailand, the Philippines, Indonesia, and Vietnam, social health insurance financed by payroll tax is commonly used for formal sector employees (excluding Malaysia), with varying outcomes in terms of financial protection. Alternative payment methods have different implications for provider behaviour and financial protection. Two alternative approaches for financial protection of the non-poor outside the formal sector have emerged-contributory arrangements and tax-financed schemes-with different abilities to achieve high population coverage rapidly. Fiscal space and mobilisation of payroll contributions are both important in accelerating financial protection. Expanding coverage of good-quality services and ensuring adequate human resources are also important to achieve universal coverage. As health-financing reform is complex, institutional capacity to generate evidence and inform policy is essential and should be strengthened. Copyright © 2011 Elsevier Ltd. All rights reserved.

On the Design of Smart Parking Networks in the Smart Cities: An Optimal Sensor Placement Model

PubMed Central

Bagula, Antoine; Castelli, Lorenzo; Zennaro, Marco

2015-01-01

Smart parking is a typical IoT application that can benefit from advances in sensor, actuator and RFID technologies to provide many services to its users and parking owners of a smart city. This paper considers a smart parking infrastructure where sensors are laid down on the parking spots to detect car presence and RFID readers are embedded into parking gates to identify cars and help in the billing of the smart parking. Both types of devices are endowed with wired and wireless communication capabilities for reporting to a gateway where the situation recognition is performed. The sensor devices are tasked to play one of the three roles: (1) slave sensor nodes located on the parking spot to detect car presence/absence; (2) master nodes located at one of the edges of a parking lot to detect presence and collect the sensor readings from the slave nodes; and (3) repeater sensor nodes, also called “anchor” nodes, located strategically at specific locations in the parking lot to increase the coverage and connectivity of the wireless sensor network. While slave and master nodes are placed based on geographic constraints, the optimal placement of the relay/anchor sensor nodes in smart parking is an important parameter upon which the cost and efficiency of the parking system depends. We formulate the optimal placement of sensors in smart parking as an integer linear programming multi-objective problem optimizing the sensor network engineering efficiency in terms of coverage and lifetime maximization, as well as its economic gain in terms of the number of sensors deployed for a specific coverage and lifetime. We propose an exact solution to the node placement problem using single-step and two-step solutions implemented in the Mosel language based on the Xpress-MPsuite of libraries. Experimental results reveal the relative efficiency of the single-step compared to the two-step model on different performance parameters. These results are consolidated by simulation results, which reveal that our solution outperforms a random placement in terms of both energy consumption, delay and throughput achieved by a smart parking network. PMID:26134104

On the Design of Smart Parking Networks in the Smart Cities: An Optimal Sensor Placement Model.

PubMed

Bagula, Antoine; Castelli, Lorenzo; Zennaro, Marco

2015-06-30

Smart parking is a typical IoT application that can benefit from advances in sensor, actuator and RFID technologies to provide many services to its users and parking owners of a smart city. This paper considers a smart parking infrastructure where sensors are laid down on the parking spots to detect car presence and RFID readers are embedded into parking gates to identify cars and help in the billing of the smart parking. Both types of devices are endowed with wired and wireless communication capabilities for reporting to a gateway where the situation recognition is performed. The sensor devices are tasked to play one of the three roles: (1) slave sensor nodes located on the parking spot to detect car presence/absence; (2) master nodes located at one of the edges of a parking lot to detect presence and collect the sensor readings from the slave nodes; and (3) repeater sensor nodes, also called "anchor" nodes, located strategically at specific locations in the parking lot to increase the coverage and connectivity of the wireless sensor network. While slave and master nodes are placed based on geographic constraints, the optimal placement of the relay/anchor sensor nodes in smart parking is an important parameter upon which the cost and efficiency of the parking system depends. We formulate the optimal placement of sensors in smart parking as an integer linear programming multi-objective problem optimizing the sensor network engineering efficiency in terms of coverage and lifetime maximization, as well as its economic gain in terms of the number of sensors deployed for a specific coverage and lifetime. We propose an exact solution to the node placement problem using single-step and two-step solutions implemented in the Mosel language based on the Xpress-MPsuite of libraries. Experimental results reveal the relative efficiency of the single-step compared to the two-step model on different performance parameters. These results are consolidated by simulation results, which reveal that our solution outperforms a random placement in terms of both energy consumption, delay and throughput achieved by a smart parking network.

Tribological Properties of NiAl Matrix Composites Filled with Serpentine Powders

NASA Astrophysics Data System (ADS)

Xue, Bing; Jing, Peixing; Ma, Weidong

2017-12-01

The unexplored tribological properties of NiAl matrix composites filled with serpentine powders are investigated using a reciprocating ball-on-disk configuration. Tribological test results reveal that increasing the serpentine concentration to some extent reduces the friction coefficients and wear rates of the composites. The best anti-friction and anti-wear performance is displayed by the NiAl matrix composite filled with 8 wt.% serpentine and 2 wt.% TiC (NAST). Microstructural analyses demonstrate that after adding serpentine, the self-lubricating films with different percentages of coverage form on the worn surfaces of the composites. A self-lubricating film with the highest percentage of coverage smears on the worn surface of NAST. This clearly suggests that serpentine can act as a new type of filler for NiAl matrix composites, whereas a combination of serpentine and TiC can enable serpentine to provide a full play to its excellent lubricating performance.

Treatment of fourth-degree hand burns.

PubMed

Nuchtern, J G; Engrav, L H; Nakamura, D Y; Dutcher, K A; Heimbach, D M; Vedder, N B

1995-01-01

Fourth-degree hand burns are rare but devastating injuries. They cannot be grafted readily but often require flaps and amputation, and impairment is significant. We report our 10-year experience (1981 to 1990) with deep hand burns to characterize our treatment and outcome. A total of 25 patients (35 hands) were treated. Eight local flaps, nine distant flaps, and two free-tissue transfers were performed. Eleven hands were treated with K-wire immobilization and grafting. Thirty-three amputations were done. Postburn function was evaluated in 25 salvaged hands. Eleven hands had good outcomes, whereas seven had moderate sequelae and seven were severely affected. Patients who were treated with flap coverage of exposed tendons and joints had better functional outcomes than those treated with delayed closure with immobilization and grafting. The excellent outcomes in the flap coverage group justifies the added commitment of technical and therapeutic resources that this treatment requires.

A New-Type of Long-Range Restructuring of Ordered Metal Surfaces Induced by Lateral Adsorbate Interactions: Iodide on AU(110) Electrodes

DTIC Science & Technology

1994-02-01

separated by monoatomic steps. The direction of the (110) gold rows is evident in the atomic- resolution image of a uniform terrace, shown in Fig. 2A...distinguish between the average surface energy of a gold atom within a (110) terrace and at a monoatomic step (edge) site. The difference between these...having (3 x 2) symmetry (coverage - 0.67), is imaged instead of the substrate, with the iodide arranged in parallel close-packed rows in between the gold

Single-step preparation of TiO2/MWCNT Nanohybrid materials by laser pyrolysis and application to efficient photovoltaic energy conversion.

PubMed

Wang, Jin; Lin, Yaochen; Pinault, Mathieu; Filoramo, Arianna; Fabert, Marc; Ratier, Bernard; Bouclé, Johann; Herlin-Boime, Nathalie

2015-01-14

This paper presents the continuous-flowand single-step synthesis of a TiO2/MWCNT (multiwall carbon nanotubes) nanohybrid material. The synthesis method allows achieving high coverage and intimate interface between the TiO2particles and MWCNTs, together with a highly homogeneous distribution of nanotubes within the oxide. Such materials used as active layer in theporous photoelectrode of solid-state dye-sensitized solar cells leads to a substantial performance improvement (20%) as compared to reference devices.

Challenges facing the United States of America in implementing universal coverage.

PubMed

Rice, Thomas; Unruh, Lynn Y; Rosenau, Pauline; Barnes, Andrew J; Saltman, Richard B; van Ginneken, Ewout

2014-12-01

In 2010, immediately before the United States of America (USA) implemented key features of the Affordable Care Act (ACA), 18% of its residents younger than 65 years lacked health insurance. In the USA, gaps in health coverage and unhealthy lifestyles contribute to outcomes that often compare unfavourably with those observed in other high-income countries. By March 2014, the ACA had substantially changed health coverage in the USA but most of its main features--health insurance exchanges, Medicaid expansion, development of accountable care organizations and further oversight of insurance companies--remain works in progress. The ACA did not introduce the stringent spending controls found in many European health systems. It also explicitly prohibits the creation of institutes--for the assessment of the cost-effectiveness of pharmaceuticals, health services and technologies--comparable to the National Institute for Health and Care Excellence in the United Kingdom of Great Britain and Northern Ireland, the Haute Autorité de Santé in France or the Pharmaceutical Benefits Advisory Committee in Australia. The ACA was--and remains--weakened by a lack of cross-party political consensus. The ACA's performance and its resulting acceptability to the general public will be critical to the Act's future.

Utilization of UARS Data in Validation of Photochemical and Dynamical Mechanism in Stratospheric Models

NASA Technical Reports Server (NTRS)

Rodriquez, Jose M.; Hu, Wenjie; Ko, Malcolm K. W.

1995-01-01

UARS data sets provide global coverage for the distributions of trace gases, which gives us an excellent chance to utilize the data set for model-data intercomparison studies. In the past three months, we have been working on the comparisons of the UARS data between 1992 (a half year after the Pinatubo eruption) and 1993 (one and a half year after the eruption) in an attempt to see how the Pinatubo volcanic eruption may have impacted stratospheric chemistry.

Overall evaluation of Skylab imagery for mapping of Latin America

NASA Technical Reports Server (NTRS)

Staples, J. E.; Eoldan, J. J. M.; Fernandez, O. W.; Alves, M.; Mutis, J.; Fletcher, A. G.; Ferrero, M. B.; Morell, J. J. H.; Romero, L. E.; Garcia, J. A. G. (Principal Investigator)

1975-01-01

The author has identified the following significant results. Skylab imagery is both desired and needed by the Latin American catographic agencies. The imagery is cost beneficial for the production of new mapping and maintenance of existing maps at national topographic series scales. If this information was available on a near time routine coverage basis, it would provide an excellent additional data base to the Latin American cartographic community, specifically Argentina, Bolivia, Chile, Colombia, Dominican Republic, Guatemala, Paraguay, and Venezuela.

Recent results from PHOBOS at RHIC

NASA Astrophysics Data System (ADS)

Back, B. B.; Baker, M. D.; Barton, D. S.; Betts, R. R.; Ballintijn, M.; Bickley, A. A.; Bindel, R.; Budzanowski, A.; Busza, W.; Carroll, A.; Decowski, M. P.; García, E.; George, N.; Gulbrandsen, K.; Gushue, S.; Halliwell, C.; Hamblen, J.; Heintzelman, G. A.; Henderson, C.; Hofman, D. J.; Hollis, R. S.; Hołyński, R.; Holzman, B.; Iordanova, A.; Johnson, E.; Kane, J. L.; Katzy, J.; Khan, N.; Kucewicz, W.; Kulinich, P.; Kuo, C. M.; Lin, W. T.; Manly, S.; McLeod, D.; Michałowski, J.; Mignerey, A. C.; Nouicer, R.; Olszewski, A.; Pak, R.; Park, I. C.; Pernegger, H.; Reed, C.; Remsberg, L. P.; Reuter, M.; Roland, C.; Roland, G.; Rosenberg, L.; Sagerer, J.; Sarin, P.; Sawicki, P.; Skulski, W.; Steadman, S. G.; Steinberg, P.; Stephans, G. S. F.; Stodulski, M.; Sukhanov, A.; Tang, J.-L.; Teng, R.; Trzupek, A.; Vale, C.; van Niewwenhuizen, G. J.; Verdier, R.; Wadsworth, B.; Wolfs, F. L. H.; Wosiek, B.; Woźniak, K.; Wuosmaa, A. H.; Wysłouch, B.; Robert PakThe Phobos Collaboration

2003-06-01

The PHOBOS experiment at RHIC has recorded measurements for AuAu collisions spanning nucleon-nucleon center-of-mass energies from √ SNN = 19.6 GeV to 200 GeV. Global observables such as elliptic flow and charged particle multiplicity provide important constraints on model predictions that characterize the state of matter produced in these collisions. The nearly 4π acceptance of the PHOBOS experiment provides excellent coverage for complete flow and multiplicity measurements. Results including beam energy and centrality dependencies are presented and compared to elementary systems.

The Preparation of Lidocaine

NASA Astrophysics Data System (ADS)

Reilly, Thomas J.

1999-11-01

In this experiment, which is intended for the introductory organic laboratory, the widely used local anesthetic Lidocaine is synthesized in two steps from 2,6-dimethylaniline. In the first step, the amine is acylated with chloroacetyl chloride. In the second step, the amide is subjected to nucleophilic substitution by diethylamine to give the final product with an overall yield of 71% based on 2,6-dimethylaniline. I have used this experiment in my organic class for several years with excellent results. Average students can isolate the crude product in less than three hours.

Use of linkage to improve the completeness of the SIM and SINASC in the Brazilian capitals

PubMed Central

Maia, Lívia Teixeira de Souza; de Souza, Wayner Vieira; Mendes, Antonio da Cruz Gouveia; da Silva, Aline Galdino Soares

2017-01-01

ABSTRACT OBJECTIVE To analyze the contribution of linkage between databases of live births and infant mortality to improve the completeness of the variables common to the Mortality Information System (SIM) and the Live Birth Information System (SINASC) in Brazilian capitals in 2012. METHODS We studied 9,001 deaths of children under one year registered in the SIM in 2012 and 1,424,691 live births present in the SINASC in 2011 and 2012. The databases were related with linkage in two steps – deterministic and probabilistic. We calculated the percentage of incompleteness of the variables common to the SIM and SINASC before and after using the technique. RESULTS We could relate 90.8% of the deaths to their respective declarations of live birth, most of them paired deterministically. We found a higher percentage of pairs in Porto Alegre, Curitiba, and Campo Grande. In the capitals of the North region, the average of pairs was 84.2%; in the South region, this result reached 97.9%. The 11 variables common to the SIM and SINASC had 11,278 incomplete fields cumulatively, and we could recover 91.4% of the data after linkage. Before linkage, five variables presented excellent completeness in the SINASC in all Brazilian capitals, but only one variable had the same status in the SIM. After applying this technique, all 11 variables of the SINASC became excellent, while this occurred in seven variables of the SIM. The city of birth was significantly associated with the death component in the quality of the information. CONCLUSIONS Despite advances in the coverage and quality of the SIM and SINASC, problems in the completeness of the variables can still be identified, especially in the SIM. In this perspective, linkage can be used to qualify important information for the analysis of infant mortality. PMID:29211201

Excellence and Innovation in Language Learning Act

THOMAS, 112th Congress

Rep. Holt, Rush [D-NJ-12

2011-05-25

House - 09/08/2011 Referred to the Subcommittee on Early Childhood, Elementary, and Secondary Education. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Excellence in Mental Health Act

THOMAS, 111th Congress

Sen. Stabenow, Debbie [D-MI

2010-12-16

Senate - 12/16/2010 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Excellence in Mental Health Act

THOMAS, 113th Congress

Sen. Stabenow, Debbie [D-MI

2013-02-07

Senate - 02/07/2013 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Excellence in Mental Health Act

THOMAS, 112th Congress

Sen. Stabenow, Debbie [D-MI

2012-03-29

Senate - 03/29/2012 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Excellence and Innovation in Language Learning Act

THOMAS, 111th Congress

Rep. Holt, Rush [D-NJ-12

2010-07-30

House - 10/13/2010 Referred to the Subcommittee on Higher Education, Lifelong Learning, and Competitiveness. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Clinical excellence in academia: perspectives from masterful academic clinicians.

PubMed

Christmas, Colleen; Kravet, Steven J; Durso, Samuel C; Wright, Scott M

2008-09-01

To better understand and characterize clinical excellence in academia by exploring the perspectives of clinically excellent faculty in the top American departments of medicine. Between March 1 and May 31, 2007, 2 investigators conducted in-depth semistructured interviews with 24 clinically excellent Department of Medicine physicians at 8 academic institutions. Interview transcripts were independently analyzed by 2 investigators and compared for agreement. Content analysis identified several major themes that relate to clinical excellence in academia. Physicians hailed from a range of internal medicine specialties; 20 (83%) were associate professors or professors and 8 (33%) were women. The mean percentage of time physicians spent in clinical care was 48%. Eight domains emerged as the major features of clinical excellence in academia: reputation, communication and interpersonal skills, professionalism and humanism, diagnostic acumen, skillful negotiation of the health care system, knowledge, scholarly approach to clinical care, and passion for clinical medicine. Understanding the core elements that contribute to clinical excellence in academia represents a pivotal step to defining clinical excellence in this setting. It is hoped that such work will lead to initiatives aimed at measuring and rewarding clinical excellence in our academic medical centers such that the most outstanding clinicians feel valued and decide to stay in academia to serve as role models for medical trainees.

A database for propagation models

NASA Technical Reports Server (NTRS)

Kantak, Anil V.; Suwitra, Krisjani; Le, Choung

1994-01-01

A database of various propagation phenomena models that can be used by telecommunications systems engineers to obtain parameter values for systems design is presented. This is an easy-to-use tool and is currently available for either a PC using Excel software under Windows environment or a Macintosh using Excel software for Macintosh. All the steps necessary to use the software are easy and many times self-explanatory; however, a sample run of the CCIR rain attenuation model is presented.

A universal phage display system for the seamless construction of Fab libraries.

PubMed

Nelson, Renae S; Valadon, Philippe

2017-11-01

The construction of Fab phage libraries requires the cloning of domains from both the light and the heavy chain of antibodies. Despite the advent of powerful strategies such as splicing-by-overlap extension PCR, obtaining high quality libraries with excellent coverage remains challenging. Here, we explored the use of type IIS restriction enzymes for the seamless cloning of Fab libraries. We analyzed human, murine and rabbit germline antibody repertoires and identified combinations of restriction enzymes that exhibit very few or no recognition sites in the antibody sequences. We describe three phagemid vectors, pUP-22Hb, pUP-22Mc and pUP-22Rc, which were employed for cloning the Fab repertoire of these hosts using BsmBI and SapI (human) or SapI alone (mouse and rabbit). Using human serum albumin as a model immunization, we built a mouse/human chimeric Fab library and a mouse Fab library in a single step ligation and successfully panned multiple cognate antibodies. The overall process is highly scalable and faster than PCR-based techniques, with a Fab insertion success rate of around 80%. By using carefully chosen overhangs on each end of the antibody domains, this approach paves the way to the universal, sequence- and vector-independent cloning and reformatting of antibody libraries. Copyright © 2017 Elsevier B.V. All rights reserved.

Corporate Culture: An Opportunity for Professional Communicators.

ERIC Educational Resources Information Center

Corbett, William J.

1986-01-01

Discusses how culture drives an organization and suggests steps to strengthen the positive cultural ties that bind a company, including distributing internal newsletters and showing employees that excellence and creativity will be recognized. (DF)

Equity in Excellence Act of 2010

THOMAS, 111th Congress

Sen. Dodd, Christopher J. [D-CT

2010-03-08

Senate - 03/08/2010 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Regioselective alkali metal reduction of dibenzocyclooctadiene lignan derivatives, demethoxylation followed by dehalogenation.

PubMed

Wang, Qing-Yao; Fang, Jia-Qi; Deng, Lu-Lu; Hao, Xiao-Jiang; Mu, Shu-Zhen

2017-12-27

The regioselective demethoxylation and dehalogenation of dihalogenated dibenzocyclooctadiene lignans derivatives were realized in a one-step reaction with excellent yields in the sodium and t-butanol reaction system.

Growth to Excellence Act of 2013

THOMAS, 113th Congress

Sen. Udall, Mark [D-CO

2013-05-14

Senate - 05/14/2013 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Growth to Excellence Act of 2011

THOMAS, 112th Congress

Sen. Udall, Mark [D-CO

2011-10-04

Senate - 10/04/2011 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Dithiothreitol-Regulated Coverage of Oligonucleotide-Modified Gold Nanoparticles To Achieve Optimized Biosensor Performance.

PubMed

Liang, Pingping; Canoura, Juan; Yu, Haixiang; Alkhamis, Obtin; Xiao, Yi

2018-01-31

DNA-modified gold nanoparticles (AuNPs) are useful signal-reporters for detecting diverse molecules through various hybridization- and enzyme-based assays. However, their performance is heavily dependent on the probe DNA surface coverage, which can influence both target binding and enzymatic processing of the bound probes. Current methods used to adjust the surface coverage of DNA-modified AuNPs require the production of multiple batches of AuNPs under different conditions, which is costly and laborious. We here develop a single-step assay utilizing dithiothreitol (DTT) to fine-tune the surface coverage of DNA-modified AuNPs. DTT is superior to the commonly used surface diluent, mercaptohexanol, as it is less volatile, allowing for the rapid and reproducible controlling of surface coverage on AuNPs with only micromolar concentrations of DTT. Upon adsorption, DTT forms a dense monolayer on gold surfaces, which provides antifouling capabilities. Furthermore, surface-bound DTT adopts a cyclic conformation, which reorients DNA probes into an upright position and provides ample space to promote DNA hybridization, aptamer assembly, and nuclease digestion. We demonstrate the effects of surface coverage on AuNP-based sensors using DTT-regulated DNA-modified AuNPs. We then use these AuNPs to visually detect DNA and cocaine in colorimetric assays based on enzyme-mediated AuNP aggregation. We determine that DTT-regulated AuNPs with lower surface coverage achieve shorter reaction times and lower detection limits relative to those for assays using untreated AuNPs or DTT-regulated AuNPs with high surface coverage. Additionally, we demonstrate that our DTT-regulated AuNPs can perform cocaine detection in 50% urine without any significant matrix effects. We believe that DTT regulation of surface coverage can be broadly employed for optimizing DNA-modified AuNP performance for use in biosensors as well as drug delivery and therapeutic applications.

Achieving world class performance step by step.

PubMed

Kerr, L J

1992-02-01

Bridgestone of Japan acquired Firestone, a United States corporation, in early 1988. This article describes the integration process of the two organizations' cultures. There are many lessons in the approach that should apply to a variety of organizations. The Strategic Improvement Process, a rather highly structured approach, harnesses the strengths of both the Japanese and American organizations and starts the manufacturing and technical departments on the road to excellence.

The Relaxation of Vicinal (001) with ZigZag [110] Steps

NASA Astrophysics Data System (ADS)

Hawkins, Micah; Hamouda, Ajmi Bh; González-Cabrera, Diego Luis; Einstein, Theodore L.

2012-02-01

This talk presents a kinetic Monte Carlo study of the relaxation dynamics of [110] steps on a vicinal (001) simple cubic surface. This system is interesting because [110] steps have different elementary excitation energetics and favor step diffusion more than close-packed [100] steps. In this talk we show how this leads to relaxation dynamics showing greater fluctuations on a shorter time scale for [110] steps as well as 2-bond breaking processes being rate determining in contrast to 3-bond breaking processes for [100] steps. The existence of a steady state is shown via the convergence of terrace width distributions at times much longer than the relaxation time. In this time regime excellent fits to the modified generalized Wigner distribution (as well as to the Berry-Robnik model when steps can overlap) were obtained. Also, step-position correlation function data show diffusion-limited increase for small distances along the step as well as greater average step displacement for zigzag steps compared to straight steps for somewhat longer distances along the step. Work supported by NSF-MRSEC Grant DMR 05-20471 as well as a DOE-CMCSN Grant.

A Textbook Selection Process.

ERIC Educational Resources Information Center

Prosser, Daniel R.; Bondavalli, Bonnie J.

In response to the problem facing college faculties of choosing textbooks that are both "readable" by students and adequate in content coverage, a text selection process has been developed that can be used with or without the aid of a reading specialist. The first step in the process, a preliminary check, examines each proposed text's publication…

Teaching Decision Making to Adolescents: A Critical Review.

ERIC Educational Resources Information Center

Beyth-Marom, Ruth; And Others

A conceptual framework derived from formal and behavioral theories was used to describe and evaluate a sample of the best developed programs for teaching decision making to adolescents. The internal validity of the programs was evaluated in terms of the adequacy of their coverage of the normatively prescribed steps to good decision making. The…

To amend title 5, United States Code, to increase the maximum age to qualify for coverage as a "child" under the health benefits program for Federal employees.

THOMAS, 111th Congress

Rep. Davis, Danny K. [D-IL-7

2009-06-19

House - 07/31/2009 Referred to the Subcommittee on Federal Workforce, Post Office, and the District of Columbia. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Theoretical Investigations of Transition Metal Surface Energies under Lattice Strain and CO Environment

DOE PAGES

Tang, Michael T.; Ulissi, Zachary W.; Chan, Karen

2018-05-30

Here, an understanding of the relative stability of surface facets is crucial to develop predictive models of catalyst activity and to fabricate catalysts with a controlled morphology. In this work, we present a systematic density functional theory study of the effect of lattice strain and CO environment on the surface formation energies of Cu, Pt, and Ni. First, we show that both compressive and tensile lattice strains favor the formation of stepped versus low-index terraces such as (111) and (100). Then, we investigate the effect of the CO environment using configurations of CO at various coverages, determined using a greedy,more » systematic approach, inspired by forward stepwise feature selection. We find that the CO environment favors stepped facets on Ni, Cu, and Pt. These trends are illustrated with the corresponding equilibrium Wulff shapes at various strains and CO pressures. In general, the surface energies of the studied transition metals are highly sensitive to strain and CO coverage, which should be considered when rationalizing trends in the catalytic activity.« less

Theoretical Investigations of Transition Metal Surface Energies under Lattice Strain and CO Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tang, Michael T.; Ulissi, Zachary W.; Chan, Karen

Here, an understanding of the relative stability of surface facets is crucial to develop predictive models of catalyst activity and to fabricate catalysts with a controlled morphology. In this work, we present a systematic density functional theory study of the effect of lattice strain and CO environment on the surface formation energies of Cu, Pt, and Ni. First, we show that both compressive and tensile lattice strains favor the formation of stepped versus low-index terraces such as (111) and (100). Then, we investigate the effect of the CO environment using configurations of CO at various coverages, determined using a greedy,more » systematic approach, inspired by forward stepwise feature selection. We find that the CO environment favors stepped facets on Ni, Cu, and Pt. These trends are illustrated with the corresponding equilibrium Wulff shapes at various strains and CO pressures. In general, the surface energies of the studied transition metals are highly sensitive to strain and CO coverage, which should be considered when rationalizing trends in the catalytic activity.« less

Endorsement of universal health coverage financial principles in Burkina Faso.

PubMed

Agier, Isabelle; Ly, Antarou; Kadio, Kadidiatou; Kouanda, Seni; Ridde, Valéry

2016-02-01

In West Africa, health system funding rarely involves cross-subsidization among population segments. In some countries, a few community-based or professional health insurance programs are present, but coverage is very low. The financial principles underlying universal health coverage (UHC) sustainability and solidarity are threefold: 1) anticipation of potential health risks; 2) risk sharing and; 3) socio-economic status solidarity. In Burkina Faso, where decision-makers are favorable to national health insurance, we measured endorsement of these principles and discerned which management configurations would achieve the greatest adherence. We used a sequential exploratory design. In a qualitative step (9 interviews, 12 focus groups), we adapted an instrument proposed by Goudge et al. (2012) to the local context and addressed desirability bias. Then, in a quantitative step (1255 respondents from the general population), we measured endorsement. Thematic analysis (qualitative) and logistic regressions (quantitative) were used. High levels of endorsement were found for each principle. Actual practices showed that anticipation and risk sharing were not only intentions. Preferences were given to solidarity between socio-economic status (SES) levels and progressivity. Although respondents seemed to prefer the national level for implementation, their current solidarity practices were mainly focused on close family. Thus, contribution levels should be set so that the entire family benefits from healthcare. Some critical conditions must be met to make UHC financial principles a reality through health insurance in Burkina Faso: trust, fair and mandatory contributions, and education. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Intensity Modulated Radiation Therapy for Early-Stage Primary Gastric Diffuse Large B-Cell Lymphoma: Dosimetric Analysis, Clinical Outcome, and Quality of Life

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Xin; Fang, Hui; Tian, Yuan

Purpose: To evaluate the dosimetric superiority, efficacy, toxicity, and quality of life (QOL) data of intensity modulated radiation therapy (IMRT) in patients with primary gastric diffuse large B-cell lymphoma (PG-DLBCL). Methods and Materials: Forty-six consecutive patients with early-stage PG-DLBCL underwent IMRT after chemotherapy. The majority of patients (61.5%) were subclassified as the non-germinal center B cell–like subtype. Dosimetric parameters of the planning target volume (PTV) and organs at risk were assessed. Survival rates were depicted with the Kaplan-Meier method and compared with the log-rank test. Quality of life was evaluated using the QLQ-C30-STO22 questionnaires at the last follow-up contact. Results: Themore » median PTV mean dose was 41.6 Gy. Only 0.73% of the PTV received <95% of the prescribed dose, indicating excellent target coverage. The median kidney V20 and liver V30 were 14.1% and 16.1%, respectively. The 5-year overall survival (OS), progression-free survival, and locoregional control rates for all patients were 80.4%, 75.0%, and 93.2%, respectively. Stage, lactate dehydrogenase level, and immunophenotype were significant prognostic factors for OS, and only stage was a significant factor for locoregional control. Consolidation IMRT in patients with complete response after chemotherapy resulted in significantly better OS and progression-free survival than salvage IMRT in patients with non-complete response. Two of 8 patients who had chronic liver disease experienced grade 4 or grade 5 acute hepatic failure after 4 to 5 cycles of rituximab-based chemotherapy and IMRT (40 Gy). No other serious acute or late toxicity was observed. The long-term global and functional QOL scales were excellent, with negligible symptom scales. Conclusions: Intensity modulated radiation therapy yielded excellent target coverage and critical tissue sparing and achieved favorable outcomes with acceptable toxicity and good long-term QOL in early-stage PG-DLBCL.« less

Trisomy 21 Research Centers of Excellence Act of 2011

THOMAS, 112th Congress

Sen. Brown, Sherrod [D-OH

2011-11-10

Senate - 11/10/2011 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Core Opportunity Resources for Equity and Excellence Act of 2014

THOMAS, 113th Congress

Rep. Fudge, Marcia L. [D-OH-11

2014-06-26

House - 11/17/2014 Referred to the Subcommittee on Early Childhood, Elementary, and Secondary Education. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

WASP (Write a Scientific Paper) using Excel - 4: Histograms.

PubMed

Grech, Victor

2018-02-01

Plotting data into graphs is a crucial step in data analysis as part of an initial descriptive statistics exercise since it gives the researcher an overview of the shape and nature of the data. Outlier values may also be identified, and these may be incorrect data, or true and important outliers. This paper explains how to access Microsoft Excel's Analysis Toolpak and provides some pointers for the utilisation of the histogram tool within the Toolpak. Copyright © 2018. Published by Elsevier B.V.

Facile synthesis of 3D few-layered MoS2 coated TiO2 nanosheet core-shell nanostructures for stable and high-performance lithium-ion batteries

NASA Astrophysics Data System (ADS)

Chen, Biao; Zhao, Naiqin; Guo, Lichao; He, Fang; Shi, Chunsheng; He, Chunnian; Li, Jiajun; Liu, Enzuo

2015-07-01

Uniform transition metal sulfide deposition on a smooth TiO2 surface to form a coating structure is a well-known challenge, caused mainly due to their poor affinities. Herein, we report a facile strategy for fabricating mesoporous 3D few-layered (<4 layers) MoS2 coated TiO2 nanosheet core-shell nanocomposites (denoted as 3D FL-MoS2@TiO2) by a novel two-step method using a smooth TiO2 nanosheet as a template and glucose as a binder. The core-shell structure has been systematically examined and corroborated by transmission electron microscopy, scanning transmission electron microscopy, and X-ray photoelectron spectroscopy analyses. It is found that the resultant 3D FL-MoS2@TiO2 as a lithium-ion battery anode delivers an outstanding high-rate capability with an excellent cycling performance, relating to the unique structure of 3D FL-MoS2@TiO2. The 3D uniform coverage of few-layered (<4 layers) MoS2 onto the TiO2 can remarkably enhance the structure stability and effectively shortens the transfer paths of both lithium ions and electrons, while the strong synergistic effect between MoS2 and TiO2 can significantly facilitate the transport of ions and electrons across the interfaces, especially in the high-rate charge-discharge process. Moreover, the facile fabrication strategy can be easily extended to design other oxide/carbon-sulfide/oxide core-shell materials for extensive applications.Uniform transition metal sulfide deposition on a smooth TiO2 surface to form a coating structure is a well-known challenge, caused mainly due to their poor affinities. Herein, we report a facile strategy for fabricating mesoporous 3D few-layered (<4 layers) MoS2 coated TiO2 nanosheet core-shell nanocomposites (denoted as 3D FL-MoS2@TiO2) by a novel two-step method using a smooth TiO2 nanosheet as a template and glucose as a binder. The core-shell structure has been systematically examined and corroborated by transmission electron microscopy, scanning transmission electron microscopy, and X-ray photoelectron spectroscopy analyses. It is found that the resultant 3D FL-MoS2@TiO2 as a lithium-ion battery anode delivers an outstanding high-rate capability with an excellent cycling performance, relating to the unique structure of 3D FL-MoS2@TiO2. The 3D uniform coverage of few-layered (<4 layers) MoS2 onto the TiO2 can remarkably enhance the structure stability and effectively shortens the transfer paths of both lithium ions and electrons, while the strong synergistic effect between MoS2 and TiO2 can significantly facilitate the transport of ions and electrons across the interfaces, especially in the high-rate charge-discharge process. Moreover, the facile fabrication strategy can be easily extended to design other oxide/carbon-sulfide/oxide core-shell materials for extensive applications. Electronic supplementary information (ESI) available: Supplementary SEM, TEM, XPS and EIS analyses. See DOI: 10.1039/c5nr03334a

Natural vitamin B12 and fucose supplementation of green smoothies with edible algae and related quality changes during their shelf life.

PubMed

Castillejo, Noelia; Martínez-Hernández, Ginés Benito; Goffi, Valentina; Gómez, Perla A; Aguayo, Encarna; Artés, Francisco; Artés-Hernández, Francisco

2018-04-01

Some algae are an excellent sources of vitamin B12, of special interest for vegetarian/vegan consumers, and of fucose to supplement fruit and vegetable beverages such as smoothies. Nevertheless, supplementation of smoothies with algae may lead to possible quality changes during smoothie shelf life that need to be studied. Therefore, the quality changes in fresh green smoothies supplemented (2.2%) with nine edible algae (sea lettuce, kombu, wakame, thongweed, dulse, Irish moss, nori, Spirulina and Chlorella) were studied throughout 24 days at 5 °C. The initial vitamin C content - 238.7-326.0 mg kg -1 fresh weight (FW) - of a 200 g portion of any of the smoothies ensured full coverage of its recommended daily intake, and still supplying 50-60% of the recommended intake after 7 days. Chlorella and Spirulina smoothies showed the highest vitamin B12 content (33.3 and 15.3 µg kg -1 FW, respectively), while brown algae showed fucose content of 141.1-571.3 mg kg -1 FW. These vitamin B12 and fucose contents were highly maintained during shelf life. The Spirulina supplementation of a 200 g smoothie portion ensured full coverage of the recommended vitamin B12 intake, with lower vitamin C degradation, during a shelf life of 17 days. Furthermore, thongweed and kombu are also considered as excellent fucose sources with similar shelf life. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Repair of retropatellar cartilage defects in the knee with microfracture and a cell-free polymer-based implant.

PubMed

Becher, Christoph; Ettinger, Max; Ezechieli, Marco; Kaps, Christian; Ewig, Marc; Smith, Tomas

2015-07-01

To analyze magnetic resonance imaging (MRI) at 3T and the clinical outcome in a short-term pilot study after treatment of retropatellar cartilage defects with microfracturing and subsequent covering with the cell-free chondrotissue(®) polyglycolic acid-hyaluronan implant. Five consecutive patients after microfracturing and defect coverage with the chondrotissue(®) implant immersed with autologous serum were included. After a mean follow-up of 21 months (range 11-31 months), defect fill and repair tissue quality was assessed by 3-T MRI followed by applying established MRI scoring systems. The patients' situation was assessed using the Knee injury and Osteoarthritis Outcome Score (KOOS) and a patients' satisfaction questionnaire. Magnetic resonance imaging showed good to excellent defect fill with complete integration. The mean MOCART score was 61 (range 50-75) points. The mean Henderson score was 7 (range 6-9) points. All patients showed subchondral bone alterations. The KOOS showed good values in all sub-categories in 4 out of 5 patients and a mean overall score of 73 (range 40-90) points. Two patients rated the outcome as excellent, two as good and one as fair. All patients would have the procedure again and recommend it. In this small case series, the coverage of symptomatic retropatellar cartilage defects with the chondrotissue(®) implant after microfracturing was safe and feasible with improvement of the patients' situation at short-term follow-up. IV, case series.

Insights on finite size effects in ab initio study of CO adsorption and dissociation on Fe 110 surface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chakrabarty, Aurab, E-mail: aurab.chakrabarty@qatar.tamu.edu; Bouhali, Othmane; Mousseau, Normand

Adsorption and dissociation of hydrocarbons on metallic surfaces represent crucial steps on the path to carburization, eventually leading to dusting corrosion. While adsorption of CO molecules on Fe surface is a barrier-less exothermic process, this is not the case for the dissociation of CO into C and O adatoms and the diffusion of C beneath the surface that are found to be associated with large energy barriers. In practice, these barriers can be affected by numerous factors that combine to favour the CO-Fe reaction such as the abundance of CO and other hydrocarbons as well as the presence of structuralmore » defects. From a numerical point of view, studying these factors is challenging and a step-by-step approach is necessary to assess, in particular, the influence of the finite box size on the reaction parameters for adsorption and dissociation of CO on metal surfaces. Here, we use density functional theory (DFT) total energy calculations with the climbing-image nudged elastic band method to estimate the adsorption energies and dissociation barriers for different CO coverages with surface supercells of different sizes. We further compute the effect of periodic boundary condition for DFT calculations and find that the contribution from van der Waals interaction in the computation of adsorption parameters is important as they contribute to correcting the finite-size error in small systems. The dissociation process involves carbon insertion into the Fe surface causing a lattice deformation that requires a larger surface system for unrestricted relaxation. We show that, in the larger surface systems associated with dilute CO-coverages, C-insertion is energetically more favourable, leading to a significant decrease in the dissociation barrier. This observation suggests that a large surface system with dilute coverage is necessary for all similar metal-hydrocarbon reactions in order to study their fundamental electronic mechanisms, as an isolated phenomenon, free from finite-size effects.« less

Insights on finite size effects in ab initio study of CO adsorption and dissociation on Fe 110 surface

NASA Astrophysics Data System (ADS)

Chakrabarty, Aurab; Bouhali, Othmane; Mousseau, Normand; Becquart, Charlotte S.; El-Mellouhi, Fedwa

2016-08-01

Adsorption and dissociation of hydrocarbons on metallic surfaces represent crucial steps on the path to carburization, eventually leading to dusting corrosion. While adsorption of CO molecules on Fe surface is a barrier-less exothermic process, this is not the case for the dissociation of CO into C and O adatoms and the diffusion of C beneath the surface that are found to be associated with large energy barriers. In practice, these barriers can be affected by numerous factors that combine to favour the CO-Fe reaction such as the abundance of CO and other hydrocarbons as well as the presence of structural defects. From a numerical point of view, studying these factors is challenging and a step-by-step approach is necessary to assess, in particular, the influence of the finite box size on the reaction parameters for adsorption and dissociation of CO on metal surfaces. Here, we use density functional theory (DFT) total energy calculations with the climbing-image nudged elastic band method to estimate the adsorption energies and dissociation barriers for different CO coverages with surface supercells of different sizes. We further compute the effect of periodic boundary condition for DFT calculations and find that the contribution from van der Waals interaction in the computation of adsorption parameters is important as they contribute to correcting the finite-size error in small systems. The dissociation process involves carbon insertion into the Fe surface causing a lattice deformation that requires a larger surface system for unrestricted relaxation. We show that, in the larger surface systems associated with dilute CO-coverages, C-insertion is energetically more favourable, leading to a significant decrease in the dissociation barrier. This observation suggests that a large surface system with dilute coverage is necessary for all similar metal-hydrocarbon reactions in order to study their fundamental electronic mechanisms, as an isolated phenomenon, free from finite-size effects.

High-power Broadband Organic THz Generator

PubMed Central

Jeong, Jae-Hyeok; Kang, Bong-Joo; Kim, Ji-Soo; Jazbinsek, Mojca; Lee, Seung-Heon; Lee, Seung-Chul; Baek, In-Hyung; Yun, Hoseop; Kim, Jongtaek; Lee, Yoon Sup; Lee, Jae-Hyeok; Kim, Jae-Ho; Rotermund, Fabian; Kwon, O-Pil

2013-01-01

The high-power broadband terahertz (THz) generator is an essential tool for a wide range of THz applications. Here, we present a novel highly efficient electro-optic quinolinium single crystal for THz wave generation. For obtaining intense and broadband THz waves by optical-to-THz frequency conversion, a quinolinium crystal was developed to fulfill all the requirements, which are in general extremely difficult to maintain simultaneously in a single medium, such as a large macroscopic electro-optic response and excellent crystal characteristics including a large crystal size with desired facets, good environmental stability, high optical quality, wide transparency range, and controllable crystal thickness. Compared to the benchmark inorganic and organic crystals, the new quinolinium crystal possesses excellent crystal properties and THz generation characteristics with broader THz spectral coverage and higher THz conversion efficiency at the technologically important pump wavelength of 800 nm. Therefore, the quinolinium crystal offers great potential for efficient and gap-free broadband THz wave generation. PMID:24220234

Frictional behavior and adhesion of Ag and Au films applied to aluminum oxide by oxygen-ion assisted Screen Cage Ion Plating (SCIP)

NASA Technical Reports Server (NTRS)

Spalvins, Talivaldis; Sliney, Harold E.

1994-01-01

A modified dc-diode ion plating system, by utilizing a metallic screen cage as a cathode, is introduced for coating nonconductors such as ceramics. Screen cage ion plating (SCIP) is used to apply Ag and Au lubricating films on aluminum oxide surfaces. This process has excellent ability to coat around corners to produce three-dimensional coverage of the substrate. A dramatic increase in adhesion is achieved when plating is performed in a reactive 50 percent O2 - 50 percent Ar glow discharge compared to the adhesion when plating is performed in 100 percent Ar. The presence of oxygen ion assistance contributes to the excellent adhesion as measured in a pull-type adhesion tester. The Ag and Au film adhesion is significantly increased (less than 70MPa) and generally exceeds the cohesion of the substrate such that portions of the alumina are pulled out.

High-power broadband organic THz generator.

PubMed

Jeong, Jae-Hyeok; Kang, Bong-Joo; Kim, Ji-Soo; Jazbinsek, Mojca; Lee, Seung-Heon; Lee, Seung-Chul; Baek, In-Hyung; Yun, Hoseop; Kim, Jongtaek; Lee, Yoon Sup; Lee, Jae-Hyeok; Kim, Jae-Ho; Rotermund, Fabian; Kwon, O-Pil

2013-11-13

The high-power broadband terahertz (THz) generator is an essential tool for a wide range of THz applications. Here, we present a novel highly efficient electro-optic quinolinium single crystal for THz wave generation. For obtaining intense and broadband THz waves by optical-to-THz frequency conversion, a quinolinium crystal was developed to fulfill all the requirements, which are in general extremely difficult to maintain simultaneously in a single medium, such as a large macroscopic electro-optic response and excellent crystal characteristics including a large crystal size with desired facets, good environmental stability, high optical quality, wide transparency range, and controllable crystal thickness. Compared to the benchmark inorganic and organic crystals, the new quinolinium crystal possesses excellent crystal properties and THz generation characteristics with broader THz spectral coverage and higher THz conversion efficiency at the technologically important pump wavelength of 800 nm. Therefore, the quinolinium crystal offers great potential for efficient and gap-free broadband THz wave generation.

Wearable Activity Tracker Literature Review (January 2009 - July 2016)

DTIC Science & Technology

2017-03-14

heart rate. Step count was the most frequently reported metric (12 studies covering 26 devices) and had the highest correlations to actual steps taken...WAT-measured heart rate (five devices) was reviewed in two reports and correlations to reference measures were moderate (r = .67) to excellent (r...reliability data on HR or time spent in PA. Reliability tended to be assessed using correlational analyses. Criteria for interpreting the strength of the

Exploiting the acylating nature of the imide-Ugi intermediate: a straightforward synthesis of tetrahydro-1,4-benzodiazepin-2-ones.

PubMed

Mossetti, Riccardo; Saggiorato, Dèsirèe; Tron, Gian Cesare

2011-12-16

We describe a simple and novel protocol for the synthesis of tetrahydro-1,4-benzodiazepin-2-ones with three points of diversity, exploiting the acylating properties of the recently rediscovered Ugi-imide. The final compounds can be easily prepared in three synthetic steps using a multicomponent reaction, a Staudinger reduction, and an acylative protocol, with good to excellent yields for each synthetic step.

Basic Lessons in *ORA and Automap 2009

DTIC Science & Technology

2009-06-01

screen capture showing the visualization of the agent x event graph from the Stargate Summit Meta-Network. The visualization displays the connections...for the Stargate dataset. 25.2 lessons - 201-207 A step by step run through of creating the Meta-Network from working with Excel, exporting data to...For the purpose of creating the Stargate MetaNetwork the two-episode story arc (Summit / Last Stand) was choosen as the basis for all the nodes

RefCNV: Identification of Gene-Based Copy Number Variants Using Whole Exome Sequencing.

PubMed

Chang, Lun-Ching; Das, Biswajit; Lih, Chih-Jian; Si, Han; Camalier, Corinne E; McGregor, Paul M; Polley, Eric

2016-01-01

With rapid advances in DNA sequencing technologies, whole exome sequencing (WES) has become a popular approach for detecting somatic mutations in oncology studies. The initial intent of WES was to characterize single nucleotide variants, but it was observed that the number of sequencing reads that mapped to a genomic region correlated with the DNA copy number variants (CNVs). We propose a method RefCNV that uses a reference set to estimate the distribution of the coverage for each exon. The construction of the reference set includes an evaluation of the sources of variability in the coverage distribution. We observed that the processing steps had an impact on the coverage distribution. For each exon, we compared the observed coverage with the expected normal coverage. Thresholds for determining CNVs were selected to control the false-positive error rate. RefCNV prediction correlated significantly (r = 0.96-0.86) with CNV measured by digital polymerase chain reaction for MET (7q31), EGFR (7p12), or ERBB2 (17q12) in 13 tumor cell lines. The genome-wide CNV analysis showed a good overall correlation (Spearman's coefficient = 0.82) between RefCNV estimation and publicly available CNV data in Cancer Cell Line Encyclopedia. RefCNV also showed better performance than three other CNV estimation methods in genome-wide CNV analysis.

Rethinking the old antiviral drug moroxydine: Discovery of novel analogues as anti-hepatitis C virus (HCV) agents.

PubMed

Magri, Andrea; Reilly, Roisin; Scalacci, Nicolò; Radi, Marco; Hunter, Michael; Ripoll, Manon; Patel, Arvind H; Castagnolo, Daniele

2015-11-15

The discovery of a novel class of HCV inhibitors is described. The new amidinourea compounds were designed as isosteric analogues of the antiviral drug moroxydine. The two derivatives 11g and 11h showed excellent HCV inhibition activity and viability and proved to inhibit a step(s) of the RNA replication. The new compounds have been synthesized in only three synthetic steps from cheap building blocks and in high yields, thus turning to be promising drug candidates in the development of cheaper HCV treatments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Core Opportunity Resources for Equity and Excellence Act of 2014

THOMAS, 113th Congress

Sen. Reed, Jack [D-RI

2014-06-26

Senate - 06/26/2014 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Titanium dioxide@polypyrrole core-shell nanowires for all solid-state flexible supercapacitors

NASA Astrophysics Data System (ADS)

Yu, Minghao; Zeng, Yinxiang; Zhang, Chong; Lu, Xihong; Zeng, Chenghui; Yao, Chenzhong; Yang, Yangyi; Tong, Yexiang

2013-10-01

Herein, we developed a facile two-step process to synthesize TiO2@PPy core-shell nanowires (NWs) on carbon cloth and reported their improved electrochemical performance for flexible supercapacitors (SCs). The fabricated solid-state SC device based on TiO2@PPy core-shell NWs not only has excellent flexibility, but also exhibits remarkable electrochemical performance.Herein, we developed a facile two-step process to synthesize TiO2@PPy core-shell nanowires (NWs) on carbon cloth and reported their improved electrochemical performance for flexible supercapacitors (SCs). The fabricated solid-state SC device based on TiO2@PPy core-shell NWs not only has excellent flexibility, but also exhibits remarkable electrochemical performance. Electronic supplementary information (ESI) available: Experimental details, XRD pattern, FT-IR absorption spectrum and CV curves of TiO2@PPy NWs, and SEM images of the PPy. See DOI: 10.1039/c3nr03578f

Characterizing the Fundamental Intellectual Steps Required in the Solution of Conceptual Problems

NASA Astrophysics Data System (ADS)

Stewart, John

2010-02-01

At some level, the performance of a science class must depend on what is taught, the information content of the materials and assignments of the course. The introductory calculus-based electricity and magnetism class at the University of Arkansas is examined using a catalog of the basic reasoning steps involved in the solution of problems assigned in the class. This catalog was developed by sampling popular physics textbooks for conceptual problems. The solution to each conceptual problem was decomposed into its fundamental reasoning steps. These fundamental steps are, then, used to quantify the distribution of conceptual content within the course. Using this characterization technique, an exceptionally detailed picture of the information flow and structure of the class can be produced. The intellectual structure of published conceptual inventories is compared with the information presented in the class and the dependence of conceptual performance on the details of coverage extracted. )

Investigating the Effects of Mass Media Exposure on the Uptake of Preventive Measures by Hong Kong Residents during the 2015 MERS Outbreak: The Mediating Role of Interpersonal Communication and the Perception of Concern.

PubMed

Ludolph, Ramona; Schulz, Peter J; Chen, Ling

2018-01-01

In 2015, South Korea experienced the largest outbreak to date of the Middle East Respiratory Syndrome (MERS-CoV) outside the Middle East. Fears related to a potential spread of the disease led to an increased alert level as well as heightened media coverage in the neighboring Hong Kong. A cross-sectional survey (N = 533) among residents of Hong Kong was conducted to assess the relationships between the effects of outbreak-related mass media coverage, interpersonal communication, the perceived level of concern in one's close environment, and the uptake of preventive measures. A serial multiple mediator model finds that interpersonal communication and higher perceived concern indirectly influence the effects of media coverage on the engagement in preventive actions. These results expand previous research on the mediating role of interpersonal communication and support assumptions about a modified two-step flow of communication in the context of a public health emergency.

Federal Parity In The Evolving Mental Health And Addiction Care Landscape.

PubMed

Barry, Colleen L; Goldman, Howard H; Huskamp, Haiden A

2016-06-01

The intent of the Paul Wellstone and Pete Domenici Mental Health Parity and Addiction Equity Act of 2008 is to eliminate differences between health insurance coverage of mental health and substance use disorder benefits and coverage of medical or surgical benefits. The Affordable Care Act significantly extended the reach of the Wellstone-Domenici law by applying it to new insurance markets. We summarize the evolution of legislative and regulatory actions to bring about federal insurance parity. We also summarize available evidence on how the Wellstone-Domenici law has contributed to addressing insurance discrimination; rectifying market inefficiencies due to adverse selection; and altering utilization, spending, and health outcomes for people with mental health and substance use disorders. In addition, we highlight important gaps in knowledge about how parity has been implemented, describe the groups still lacking parity-level coverage, and make recommendations on steps to improve the likelihood that the Wellstone-Domenici law will fulfill the aims of its architects. Project HOPE—The People-to-People Health Foundation, Inc.

A methodology for extending domain coverage in SemRep.

PubMed

Rosemblat, Graciela; Shin, Dongwook; Kilicoglu, Halil; Sneiderman, Charles; Rindflesch, Thomas C

2013-12-01

We describe a domain-independent methodology to extend SemRep coverage beyond the biomedical domain. SemRep, a natural language processing application originally designed for biomedical texts, uses the knowledge sources provided by the Unified Medical Language System (UMLS©). Ontological and terminological extensions to the system are needed in order to support other areas of knowledge. We extended SemRep's application by developing a semantic representation of a previously unsupported domain. This was achieved by adapting well-known ontology engineering phases and integrating them with the UMLS knowledge sources on which SemRep crucially depends. While the process to extend SemRep coverage has been successfully applied in earlier projects, this paper presents in detail the step-wise approach we followed and the mechanisms implemented. A case study in the field of medical informatics illustrates how the ontology engineering phases have been adapted for optimal integration with the UMLS. We provide qualitative and quantitative results, which indicate the validity and usefulness of our methodology. Published by Elsevier Inc.

Footprint Database and web services for the Herschel space observatory

NASA Astrophysics Data System (ADS)

Verebélyi, Erika; Dobos, László; Kiss, Csaba

2015-08-01

Using all telemetry and observational meta-data, we created a searchable database of Herschel observation footprints. Data from the Herschel space observatory is freely available for everyone but no uniformly processed catalog of all observations has been published yet. As a first step, we unified the data model for all three Herschel instruments in all observation modes and compiled a database of sky coverage information. As opposed to methods using a pixellation of the sphere, in our database, sky coverage is stored in exact geometric form allowing for precise area calculations. Indexing of the footprints allows for very fast search among observations based on pointing, time, sky coverage overlap and meta-data. This enables us, for example, to find moving objects easily in Herschel fields. The database is accessible via a web site and also as a set of REST web service functions which makes it usable from program clients like Python or IDL scripts. Data is available in various formats including Virtual Observatory standards.

The Genome Sequence of Taurine Cattle: A Window to Ruminant Biology and Evolution

USDA-ARS?s Scientific Manuscript database

As a major step toward understanding the biology and evolution of ruminants, the cattle genome was sequenced to ~7x coverage using a combined whole genome shotgun and BAC skim approach. The cattle genome contains a minimum of 22,000 genes, with a core set of 14,345 orthologs found in seven mammalian...

What Role Can School Health Providers Play in Health Care Reform?

ERIC Educational Resources Information Center

Fleming, Robin

2009-01-01

President Barack Obama is wasting no time in unfolding his plan to provide health coverage for all Americans. He started in February by signing legislation to reinstate the State Children's Health Insurance Program, which expands eligibility criteria to provide 4 million more children access to health care. This first step is one of many needed to…

To amend title 18, United States Code, to extend the coverage of the Federal prohibition against hate crimes in order to provide greater protections to persons who are gay, lesbian, bisexual, or transgender.

THOMAS, 113th Congress

Rep. Brady, Robert A. [D-PA-1

2014-11-14

House - 12/09/2014 Referred to the Subcommittee on Crime, Terrorism, Homeland Security, and Investigations. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Selective adsorption of a supramolecular structure on flat and stepped gold surfaces

NASA Astrophysics Data System (ADS)

Peköz, Rengin; Donadio, Davide

2018-04-01

Halogenated aromatic molecules assemble on surfaces forming both hydrogen and halogen bonds. Even though these systems have been intensively studied on flat metal surfaces, high-index vicinal surfaces remain challenging, as they may induce complex adsorbate structures. The adsorption of 2,6-dibromoanthraquinone (2,6-DBAQ) on flat and stepped gold surfaces is studied by means of van der Waals corrected density functional theory. Equilibrium geometries and corresponding adsorption energies are systematically investigated for various different adsorption configurations. It is shown that bridge sites and step edges are the preferred adsorption sites for single molecules on flat and stepped surfaces, respectively. The role of van der Waals interactions, halogen bonds and hydrogen bonds are explored for a monolayer coverage of 2,6-DBAQ molecules, revealing that molecular flexibility and intermolecular interactions stabilize two-dimensional networks on both flat and stepped surfaces. Our results provide a rationale for experimental observation of molecular carpeting on high-index vicinal surfaces of transition metals.

Dosimetric comparison between step-shoot intensity-modulated radiotherapy and volumetric-modulated arc therapy for upper thoracic and cervical esophageal carcinoma.

PubMed

Gao, Min; Li, Qilin; Ning, Zhonghua; Gu, Wendong; Huang, Jin; Mu, Jinming; Pei, Honglei

2016-01-01

To compare and analyze the dosimetric characteristics of volumetric modulated arc therapy (VMAT) vs step-shoot intensity-modulated radiation therapy (sIMRT) for upper thoracic and cervical esophageal carcinoma. Single-arc VMAT (VMAT1), dual-arc VMAT (VMAT2), and 7-field sIMRT plans were designed for 30 patients with upper thoracic or cervical esophageal carcinoma. Planning target volume (PTV) was prescribed to 50.4Gy in 28 fractions, and PTV1 was prescribed to 60Gy in 28 fractions. The parameters evaluated included dose homogeneity and conformality, dose to organs at risk (OARs), and delivery efficiency. (1) In comparison to sIMRT, VMAT provided a systematic improvement in PTV1 coverage. The homogeneity index of VMAT1 was better than that of VMAT2. There were no significant differences among sIMRT, VMAT1, and VMAT2 in PTV coverage. (2) VMAT1 and VMAT2 reduced the maximum dose of spinal cord as compared with sIMRT (p < 0.05). The rest dose-volume characteristics of OARs were similar. (3) Monitor units of VMAT2 and VMAT1 were more than sIMRT. However, the treatment time of VMAT1, VMAT2, and sIMRT was (2.0 ± 0.2), (2.8 ± 0.3), and (9.8 ± 0.8) minutes, respectively. VMAT1 was the fastest, and the difference was statistically significant. In the treatment of upper thoracic and cervical esophageal carcinoma by the AXESSE linac, compared with 7-field sIMRT, VMAT showed better PTV1 coverage and superior spinal cord sparing. Single-arc VMAT had similar target volume coverage and the sparing of OAR to dual-arc VMAT, with shortest treatment time and highest treatment efficiency in the 3 kinds of plans. Copyright © 2016 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

Dosimetric comparison between step-shoot intensity-modulated radiotherapy and volumetric-modulated arc therapy for upper thoracic and cervical esophageal carcinoma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gao, Min; Li, Qilin; Ning, Zhonghua

2016-07-01

To compare and analyze the dosimetric characteristics of volumetric modulated arc therapy (VMAT) vs step-shoot intensity-modulated radiation therapy (sIMRT) for upper thoracic and cervical esophageal carcinoma. Single-arc VMAT (VMAT1), dual-arc VMAT (VMAT2), and 7-field sIMRT plans were designed for 30 patients with upper thoracic or cervical esophageal carcinoma. Planning target volume (PTV) was prescribed to 50.4 Gy in 28 fractions, and PTV1 was prescribed to 60 Gy in 28 fractions. The parameters evaluated included dose homogeneity and conformality, dose to organs at risk (OARs), and delivery efficiency. (1) In comparison to sIMRT, VMAT provided a systematic improvement in PTV1 coverage.more » The homogeneity index of VMAT1 was better than that of VMAT2. There were no significant differences among sIMRT, VMAT1, and VMAT2 in PTV coverage. (2) VMAT1 and VMAT2 reduced the maximum dose of spinal cord as compared with sIMRT (p < 0.05). The rest dose-volume characteristics of OARs were similar. (3) Monitor units of VMAT2 and VMAT1 were more than sIMRT. However, the treatment time of VMAT1, VMAT2, and sIMRT was (2.0 ± 0.2), (2.8 ± 0.3), and (9.8 ± 0.8) minutes, respectively. VMAT1 was the fastest, and the difference was statistically significant. In the treatment of upper thoracic and cervical esophageal carcinoma by the AXESSE linac, compared with 7-field sIMRT, VMAT showed better PTV1 coverage and superior spinal cord sparing. Single-arc VMAT had similar target volume coverage and the sparing of OAR to dual-arc VMAT, with shortest treatment time and highest treatment efficiency in the 3 kinds of plans.« less

Estrellas de carbono galácticas en el VVV

NASA Astrophysics Data System (ADS)

Merlo, D. C.

2015-08-01

One of the characteristics of carbon stars is their variability, which depends on the evolutionary state and mass. Therefore, the study of this property is relevant to explain the physical processes occurring in their atmospheres. The VVV survey provides an excellent opportunity to carry out this kind of analysis, as it allows to have deep infrared multi-epoch photometry in order to build high-quality light-curves. Here we present an implemented method for identifying galactic carbon stars within the coverage area of VVV and the first results obtained.

Recognizing Washington State University Honors College for 50 years of excellence.

THOMAS, 111th Congress

Rep. McMorris Rodgers, Cathy [R-WA-5

2010-03-11

House - 04/30/2010 Referred to the Subcommittee on Higher Education, Lifelong Learning, and Competitiveness. (All Actions) Tracker: This bill has the status Agreed to in HouseHere are the steps for Status of Legislation:

Three-Year Impacts Of The Affordable Care Act: Improved Medical Care And Health Among Low-Income Adults.

PubMed

Sommers, Benjamin D; Maylone, Bethany; Blendon, Robert J; Orav, E John; Epstein, Arnold M

2017-06-01

Major policy uncertainty continues to surround the Affordable Care Act (ACA) at both the state and federal levels. We assessed changes in health care use and self-reported health after three years of the ACA's coverage expansion, using survey data collected from low-income adults through the end of 2016 in three states: Kentucky, which expanded Medicaid; Arkansas, which expanded private insurance to low-income adults using the federal Marketplace; and Texas, which did not expand coverage. We used a difference-in-differences model with a control group and an instrumental variables model to provide individual-level estimates of the effects of gaining insurance. By the end of 2016 the uninsurance rate in the two expansion states had dropped by more than 20 percentage points relative to the nonexpansion state. For uninsured people gaining coverage, this change was associated with a 41-percentage-point increase in having a usual source of care, a $337 reduction in annual out-of-pocket spending, significant increases in preventive health visits and glucose testing, and a 23-percentage-point increase in "excellent" self-reported health. Among adults with chronic conditions, we found improvements in affordability of care, regular care for those conditions, medication adherence, and self-reported health. Project HOPE—The People-to-People Health Foundation, Inc.

Challenges facing the United States of America in implementing universal coverage

PubMed Central

Unruh, Lynn Y; Rosenau, Pauline; Barnes, Andrew J; Saltman, Richard B; van Ginneken, Ewout

2014-01-01

Abstract In 2010, immediately before the United States of America (USA) implemented key features of the Affordable Care Act (ACA), 18% of its residents younger than 65 years lacked health insurance. In the USA, gaps in health coverage and unhealthy lifestyles contribute to outcomes that often compare unfavourably with those observed in other high-income countries. By March 2014, the ACA had substantially changed health coverage in the USA but most of its main features – health insurance exchanges, Medicaid expansion, development of accountable care organizations and further oversight of insurance companies – remain works in progress. The ACA did not introduce the stringent spending controls found in many European health systems. It also explicitly prohibits the creation of institutes – for the assessment of the cost–effectiveness of pharmaceuticals, health services and technologies – comparable to the National Institute for Health and Care Excellence in the United Kingdom of Great Britain and Northern Ireland, the Haute Autorité de Santé in France or the Pharmaceutical Benefits Advisory Committee in Australia. The ACA was – and remains – weakened by a lack of cross-party political consensus. The ACA’s performance and its resulting acceptability to the general public will be critical to the Act’s future. PMID:25552773

Single-step synthesis of styryl phosphonic acids via palladium-catalyzed Heck coupling of vinyl phosphonic acid with aryl halides

DOE PAGES

McNichols, Brett W.; Koubek, Joshua T.; Sellinger, Alan

2017-10-27

Here, we have developed a single step palladium-catalyzed Heck coupling of aryl halides with vinyl phosphonic acid to produce functionalized (E)-styryl phosphonic acids. This pathway utilizes a variety of commercially available aryl halides, vinyl phosphonic acid and Pd(P(tBu) 3) 2 as catalyst. These conditions produce a wide range of styryl phosphonic acids with high purities and good to excellent yields (31–80%).

Single-step synthesis of styryl phosphonic acids via palladium-catalyzed Heck coupling of vinyl phosphonic acid with aryl halides

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNichols, Brett W.; Koubek, Joshua T.; Sellinger, Alan

Here, we have developed a single step palladium-catalyzed Heck coupling of aryl halides with vinyl phosphonic acid to produce functionalized (E)-styryl phosphonic acids. This pathway utilizes a variety of commercially available aryl halides, vinyl phosphonic acid and Pd(P(tBu) 3) 2 as catalyst. These conditions produce a wide range of styryl phosphonic acids with high purities and good to excellent yields (31–80%).

Rapid synthesis of VX-745: p38 MAP kinase inhibition in Werner syndrome cells.

PubMed

Bagley, Mark C; Davis, Terence; Dix, Matthew C; Rokicki, Michal J; Kipling, David

2007-09-15

The p38 mitogen-activated protein kinase inhibitor VX-745 is prepared rapidly and efficiently in a four-step sequence using a combination of conductive heating and microwave-mediated steps. Its inhibitory activity was confirmed in hTERT immortalized HCA2 and WS dermal fibroblasts at 0.5-1.0 microM concentration by ELISA and immunoblot assay, and displays excellent kinase selectivity over the related stress-activated kinase JNK.

High-latitude geomagnetic disturbances during ascending solar cycle 24

NASA Astrophysics Data System (ADS)

Peitso, Pyry; Tanskanen, Eija; Stolle, Claudia; Berthou Lauritsen, Nynne; Matzka, Jürgen

2015-04-01

High-latitude regions are very convenient for study of several space weather phenomena such as substorms. Large geographic coverage as well as long time series of data are essential due to the global nature of space weather and the long duration of solar cycles. We will examine geomagnetic activity in Greenland from magnetic field measurements taken by DTU (Technical University of Denmark) magnetometers during the years 2010 to 2014. The study uses data from 13 magnetometer stations located on the east coast of Greenland and one located on the west coast. The original measurements are in one second resolution, thus the amount of data is quite large. Magnetic field H component (positive direction towards the magnetic north) was used throughout the study. Data processing will be described from calibration of original measurements to plotting of long time series. Calibration consists of determining the quiet hour of a given day and reducing the average of that hour from all the time steps of the day. This normalizes the measurements and allows for better comparison between different time steps. In addition to the full time line of measurements, daily, monthly and yearly averages will be provided for all stations. Differential calculations on the change of the H component will also be made available for the duration of the full data set. Envelope curve plots will be presented for duration of the time line. Geomagnetic conditions during winter and summer will be compared to examine seasonal variation. Finally the measured activity will be compared to NOAA (National Oceanic and Atmospheric Administration) issued geomagnetic space weather alerts from 2010 to 2014. Calculations and plotting of measurement data were done with MATLAB. M_map toolbox was used for plotting of maps featured in the study (http://www2.ocgy.ubc.ca/~rich/map.html). The study was conducted as a part of the ReSoLVE (Research on Solar Long-term Variability and Effects) Center of Excellence.

Dyed positive photoresist employing curcumin for notching control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Renschler, C.L.; Lemen, E.K.; Rodriquez, J.L.

1989-01-01

A variety of dyes have been proposed as absorbers for photoresists. The nonbleachable absorbance incorporated in this way can result in a reduction in standing waves and/or reflective notching (nonuniform linewidths due to reflections off the substrate). In addition, it can provide increased visual contrast at the patterned resist inspection stage. A variation on the visual contrast improvement involves the use of a dye which fluoresces, allowing for more precise resist metrology. The deposition and growth processes used here result in large oxide and polycrystalline silicon steps with high aspect ratios. Processes such as LOCOS which allow less severe topography,more » are inherently radiation soft and cannot be used on our fabrication process. The resulting steep sidewalls make metal coverage and etch significantly more difficult. Thus, the glass layer which isolates metal conductors from oxide steps is smoothed with either a thermal reflow or a plasma etch of a partially planarized coating to reduce the aspect ratio of the step. This results in metal coverage with a 45{degrees} angle at each step, which causes severe notching. This paper reports on an attempt to develop a resist which would eliminate this notching problem. Although the addition of unbleachable dye to photoresist for the control of notching is well established, most of the dyes used have one or more serious shortcomings, such as a poor match of the absorption spectrum with the exposure spectrum or low solubility in resist. Severe notching requires the use of a resist dye with optimized physical and spectroscopic properties to allow high optical absorbance to be achieved without the onset of other problems such as particulate formation or changes in thermal properties.« less

Research on the range side lobe suppression method for modulated stepped frequency radar signals

NASA Astrophysics Data System (ADS)

Liu, Yinkai; Shan, Tao; Feng, Yuan

2018-05-01

The magnitude of time-domain range sidelobe of modulated stepped frequency radar affects the imaging quality of inverse synthetic aperture radar (ISAR). In this paper, the cause of high sidelobe in modulated stepped frequency radar imaging is analyzed first in real environment. Then, the chaos particle swarm optimization (CPSO) is used to select the amplitude and phase compensation factors according to the minimum sidelobe criterion. Finally, the compensated one-dimensional range images are obtained. Experimental results show that the amplitude-phase compensation method based on CPSO algorithm can effectively reduce the sidelobe peak value of one-dimensional range images, which outperforms the common sidelobe suppression methods and avoids the coverage of weak scattering points by strong scattering points due to the high sidelobes.

Step edge sputtering yield at grazing incidence ion bombardment.

PubMed

Hansen, Henri; Polop, Celia; Michely, Thomas; Friedrich, Andreas; Urbassek, Herbert M

2004-06-18

The surface morphology of Pt(111) was investigated by scanning tunneling microscopy after 5 keV Ar+ ion bombardment at grazing incidence in dependence of the ion fluence and in the temperature range between 625 and 720 K. The average erosion rate was found to be strongly dependent on the ion fluence and the substrate temperature during bombardment. This dependence is traced back to the variation of step concentration with temperature and fluence. We develop a simple model allowing us to determine separately the constant sputtering yields for terraces and for impact area stripes in front of ascending steps. The experimentally determined yield of these stripes--the step-edge sputtering yield--is in excellent agreement with our molecular dynamics simulations performed for the experimental situation.

Generating variable and random schedules of reinforcement using Microsoft Excel macros.

PubMed

Bancroft, Stacie L; Bourret, Jason C

2008-01-01

Variable reinforcement schedules are used to arrange the availability of reinforcement following varying response ratios or intervals of time. Random reinforcement schedules are subtypes of variable reinforcement schedules that can be used to arrange the availability of reinforcement at a constant probability across number of responses or time. Generating schedule values for variable and random reinforcement schedules can be difficult. The present article describes the steps necessary to write macros in Microsoft Excel that will generate variable-ratio, variable-interval, variable-time, random-ratio, random-interval, and random-time reinforcement schedule values.

Digital Archiving: Where the Past Lives Again

NASA Astrophysics Data System (ADS)

Paxson, K. B.

2012-06-01

The process of digital archiving for variable star data by manual entry with an Excel spreadsheet is described. Excel-based tools including a Step Magnitude Calculator and a Julian Date Calculator for variable star observations where magnitudes and Julian dates have not been reduced are presented. Variable star data in the literature and the AAVSO International Database prior to 1911 are presented and reviewed, with recent archiving work being highlighted. Digitization using optical character recognition software conversion is also demonstrated, with editing and formatting suggestions for the OCR-converted text.

Exploring the effect of oxygen coverage on the electronic, magnetic and chemical properties of Ni(111) supported h-BN sheet: A density functional study

NASA Astrophysics Data System (ADS)

Wasey, A. H. M. Abdul; Das, G. P.; Majumder, C.

2017-05-01

Traditionally, h-BN is used as coating material to prevent corrosion on the metal surface. In sharp contrast to this, here we show catalytic behavior of h-BN monolayer deposited on Ni(111) surface, clearly demonstrating the influence of the support in modulation of h-BN electronic structure. Using first principles density functional theory we have studied the interaction of O2 molecules with the h-BN/Ni(111) surface. The activation of Osbnd O bond, which is the most important step for oxidative catalysis, showed dependence on the O2 coverage. Thus this study is extremely important to predict the optimum O2 pressure in reaction chamber for efficient catalysis.

Hydrogenated Polycyclic Aromatic Hydrocarbons and the 2940 and 2850 Wavenumber (3.40 and 3.51 micron) Infrared Emission Features

NASA Technical Reports Server (NTRS)

Bernstein, Max P.; Sandford, Scott A.; Allamadola, Louis J.

1996-01-01

The 3150-2700/cm (3.17-3.70 micron) range of the spectra of a number of Ar-matrix-isolated PAHs containing excess H atoms (H(sub n)-PAHS) are presented. This region covers features produced by aromatic and aliphatic C-H stretching vibrations as well as overtone and combination bands involving lower lying fundamentals. The aliphatic C-H stretches in molecules of this type having low to modest excess H coverage provide excellent fits to a number of the weak emission features superposed on the plateau between 3080 and 2700/cm (3.25 and 3.7 micron) in the spectra of many planetary nebulae, reflection nebulae, and H II regions. Higher H coverage is implied for a few objects. We compare these results in context with the other suggested identifications of the emission features in the 2950-2700/cm (3.39-3.70 micron) region and briefly discuss their astrophysical implications.

Application of remote sensing technology to land evaluation, planning utilization of land resources, and assessment of wildlife areas in eastern South Dakota

NASA Technical Reports Server (NTRS)

1975-01-01

A soils map for land evaluation in Potter County (Eastern South Dakota) was developed to demonstrate the use of remote sensing technology in the area of diverse parent materials and topography. General land use and soils maps have also been developed for land planning LANDSAT, RB-57 imagery, and USGS photographs are being evaluated for making soils and land use maps. LANDSAT fulfilled the requirements for general land use and a general soils map. RB-57 imagery supplemented by large scale black and white stereo coverage was required to provide the detail needed for the final soils map for land evaluation. Color infrared prints excelled black and white coverage for this soil mapping effort. An identification and classification key for wetland types in the Lake Dakota Plain was developed for June 1975 using color infrared imagery. Wetland types in the region are now being mapped via remote sensing techniques to provide a current inventory for development of mitigation measures.

Vitamin A supplementation in Tanzania: the impact of a change in programmatic delivery strategy on coverage.

PubMed

Masanja, Honorati; Schellenberg, Joanna Armstrong; Mshinda, Hassan M; Shekar, Meera; Mugyabuso, Joseph K L; Ndossi, Godwin D; de Savigny, Don

2006-11-01

Efficient delivery strategies for health interventions are essential for high and sustainable coverage. We report impact of a change in programmatic delivery strategy from routine delivery through the Expanded Programme on Immunization (EPI+) approach to twice-yearly mass distribution campaigns on coverage of vitamin A supplementation in Tanzania We investigated disparities in age, sex, socio-economic status, nutritional status and maternal education within vitamin A coverage in children between 1 and 2 years of age from two independent household level child health surveys conducted (1) during a continuous universal targeting scheme based on routine EPI contacts for children aged 9, 15 and 21 months (1999); and (2) three years later after the introduction of twice-yearly vitamin A supplementation campaigns for children aged 6 months to 5 years, a 6-monthly universal targeting scheme (2002). A representative cluster sample of approximately 2,400 rural households was obtained from Rufiji, Morogoro Rural, Kilombero and Ulanga districts. A modular questionnaire about the health of all children under the age of five was administered to consenting heads of households and caretakers of children. Information on the use of child health interventions including vitamin A was asked. Coverage of vitamin A supplementation among 1-2 year old children increased from 13% [95% CI 10-18%] in 1999 to 76% [95%CI 72-81%] in 2002. In 2002 knowledge of two or more child health danger signs was negatively associated with vitamin A supplementation coverage (80% versus 70%) (p = 0.04). Nevertheless, we did not find any disparities in coverage of vitamin A by district, gender, socio-economic status and DPT vaccinations. Change in programmatic delivery of vitamin A supplementation was associated with a major improvement in coverage in Tanzania that was been sustained by repeated campaigns for at least three years. There is a need to monitor the effect of such campaigns on the routine health system and on equity of coverage. Documentation of vitamin A supplementation campaign contacts on routine maternal and child health cards would be a simple step to facilitate this monitoring.

Congratulating Lock Haven University of Pennsylvania for 140 years of excellence in higher education.

THOMAS, 111th Congress

Rep. Thompson, Glenn [R-PA-5

2010-03-18

House - 04/30/2010 Referred to the Subcommittee on Higher Education, Lifelong Learning, and Competitiveness. (All Actions) Tracker: This bill has the status Agreed to in HouseHere are the steps for Status of Legislation:

Consistency, Accuracy, Responsibility, and Excellence in Medical Imaging and Radiation Therapy Act of 2010

THOMAS, 111th Congress

Sen. Enzi, Michael B. [R-WY

2010-08-05

Senate - 08/05/2010 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Recognizing the University of Arizona's 125 years of dedication to excellence in higher education.

THOMAS, 111th Congress

Rep. Giffords, Gabrielle [D-AZ-8

2010-03-09

House - 03/22/2010 Referred to the Subcommittee on Higher Education, Lifelong Learning, and Competitiveness. (All Actions) Tracker: This bill has the status Agreed to in HouseHere are the steps for Status of Legislation:

Consistency, Accuracy, Responsibility, and Excellence in Medical Imaging and Radiation Therapy Act of 2013

THOMAS, 113th Congress

Sen. Enzi, Michael B. [R-WY

2013-03-21

Senate - 03/21/2013 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Consistency, Accuracy, Responsibility, and Excellence in Medical Imaging and Radiation Therapy Act of 2012

THOMAS, 112th Congress

Sen. Enzi, Michael B. [R-WY

2012-06-25

Senate - 06/25/2012 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Developing Investigation Skills in an Introductory Multistep Synthesis Using Fluorene Oxidation and Reduction

ERIC Educational Resources Information Center

Stocksdale, Mark G; Pointer, Roy D; Benson, Barret W.; Fletcher, Steven E. S.; Henry, Ian; Ogren, Paul J.; Berg, Michael A. G.

2004-01-01

A two-step oxidation-reduction sequence that incorporates several important aspects of synthesis into introductory organic chemistry laboratories is described. This experiment is an excellent vehicle for introducing elements of discovery and intermediate yield improvement strategies.

America Creating Opportunities to Meaningfully Promote Excellence in Technology, Education, and Science Reauthorization Act of 2014

THOMAS, 113th Congress

Sen. Rockefeller, John D., IV [D-WV

2014-07-31

Senate - 07/31/2014 Read twice and referred to the Committee on Commerce, Science, and Transportation. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Recognizing the University of Southern Mississippi for 100 years of service and excellence in higher education.

THOMAS, 111th Congress

Rep. Taylor, Gene [D-MS-4

2010-03-24

House - 04/30/2010 Referred to the Subcommittee on Higher Education, Lifelong Learning, and Competitiveness. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Establishing a Network of Health-Advancing National Centers of Excellence for Depression Act of 2009

THOMAS, 111th Congress

Sen. Stabenow, Debbie [D-MI

2009-10-22

Senate - 10/22/2009 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Teaching in the Private College: Critical Resource in a World of Limited Growth

ERIC Educational Resources Information Center

French, Peter L.

1974-01-01

Proposes some practical steps colleges may take to cope with the consequences of a steady-state economy (energy sources, raw materials, production costs) with special emphasis on the crucial importance of excellence in teaching. (Editor/PG)

World-Record Solar Cell a Step Closer to Cheap Solar Energy

Science.gov Websites

envelope of solar-cell efficiency, we can begin to visualize the day when energy from the sun will be in efficiency translates into lower costs for harnessing energy from the sun. The cell's excellent

A comprehensive approach to evaluating and classifying sun-protective clothing.

PubMed

Downs, N J; Harrison, S L

2018-04-01

National standards for clothing designed to protect the wearer from the harmful effects of solar ultraviolet radiation (UVR) have been implemented in Australia/New Zealand, Europe and the U.S.A. Industry standards reflect the need to protect the skin by covering a considerable proportion of the potentially exposed body surface area (BSA) and by reducing UVR-transmission through fabric (the Ultraviolet Protection Factor; UPF). This research aimed to develop a new index for rating sun-protective clothing that incorporates the BSA coverage of the garment in addition to the UPF of the fabric. A mannequin model was fixed to an optical bench and marked with horizontal lines at 1-cm intervals. An algorithm (the Garment Protector Factor; GPF) was developed based on the number of lines visible on the clothed vs. unclothed mannequin and the UPF of the garment textile. This data was collected in 2015/16 and analysed in 2016. The GPF weights fabric UPF by BSA coverage above the minimum required by international sun-protective clothing standards for upper-body, lower-body and full-body garments. The GPF increases with BSA coverage of the garment and fabric UPF. Three nominal categories are proposed for the GPF: 0 ≤ GPF < 3 for garments that 'meet' minimum standards; 3 ≤ GPF < 6 for garments providing 'good' sun protection; and GPF ≥ 6 indicating 'excellent' protection. Adoption of the proposed rating scheme should encourage manufacturers to design sun-protective garments that exceed the minimum standard for BSA coverage, with positive implications for skin cancer prevention, consumer education and sun-protection awareness. © 2017 British Association of Dermatologists.

How much does it cost to achieve coverage targets for primary healthcare services? A costing model from Aceh, Indonesia.

PubMed

Abdullah, Asnawi; Hort, Krishna; Abidin, Azwar Zaenal; Amin, Fadilah M

2012-01-01

Despite significant investment in improving service infrastructure and training of staff, public primary healthcare services in low-income and middle-income countries tend to perform poorly in reaching coverage targets. One of the factors identified in Aceh, Indonesia was the lack of operational funds for service provision. The objective of this study was to develop a simple and transparent costing tool that enables health planners to calculate the unit costs of providing basic health services to estimate additional budgets required to deliver services in accordance with national targets. The tool was developed using a standard economic approach that linked the input activities to achieving six national priority programs at primary healthcare level: health promotion, sanitation and environment health, maternal and child health and family planning, nutrition, immunization and communicable diseases control, and treatment of common illness. Costing was focused on costs of delivery of the programs that need to be funded by local government budgets. The costing tool consisting of 16 linked Microsoft Excel worksheets was developed and tested in several districts enabled the calculation of the unit costs of delivering of the six national priority programs per coverage target of each program (such as unit costs of delivering of maternal and child health program per pregnant mother). This costing tool can be used by health planners to estimate additional money required to achieve a certain level of coverage of programs, and it can be adjusted for different costs and program delivery parameters in different settings. Copyright © 2012 John Wiley & Sons, Ltd.

Genome-wide ancestry and divergence patterns from low-coverage sequencing data reveal a complex history of admixture in wild baboons

PubMed Central

Wall, Jeffrey D; Schlebusch, Stephen A; Alberts, Susan C; Cox, Laura A; Snyder-Mackler, Noah; Nevonen, Kimberly; Carbone, Lucia; Tung, Jenny

2017-01-01

Naturally occurring admixture has now been documented in every major primate lineage, suggesting its key role in primate evolutionary history. Active primate hybrid zones can provide valuable insight into this process. Here, we investigate the history of admixture in one of the best-studied natural primate hybrid zones, between yellow baboons (Papio cynocephalus) and anubis baboons (Papio anubis) in the Amboseli ecosystem of Kenya. We generated a new genome assembly for yellow baboon and low coverage genome-wide resequencing data from yellow baboons, anubis baboons, and known hybrids (n=44). Using a novel composite likelihood method for estimating local ancestry from low coverage data, we found high levels of genetic diversity and genetic differentiation between the parent taxa, and excellent agreement between genome-scale ancestry estimates and a priori pedigree, life history, and morphology-based estimates (r2=0.899). However, even putatively unadmixed Amboseli yellow individuals carried a substantial proportion of anubis ancestry, presumably due to historical admixture. Further, the distribution of shared versus fixed differences between a putatively unadmixed Amboseli yellow baboon and an unadmixed anubis baboon, both sequenced at high coverage, are inconsistent with simple isolation-migration or equilibrium migration models. Our findings suggest a complex process of intermittent contact that has occurred multiple times in baboon evolutionary history, despite no obvious fitness costs to hybrids or major geographic or behavioral barriers. In combination with the extensive phenotypic data available for baboon hybrids, our results provide valuable context for understanding the history of admixture in primates, including in our own lineage. PMID:27145036

The #EduElection: Owning the Debate through Communications and Social Media

ERIC Educational Resources Information Center

Vinocur, Julian

2014-01-01

For nearly a decade, New York City education groups organizing to improve education under Bloomberg could regularly be found protesting on the steps of City Hall. Before the 2013 mayoral race, a typical education protest would--at its best--earn media coverage from a couple of outlets. The fact that parents, students, and teachers rally for more…

The Quality Assessment of the 1973 Survey of Graduate Science Student Support Survey.

ERIC Educational Resources Information Center

Daley, James M.

In this paper, the steps implemented by the National Institutes of Health (NIH) and the National Science Foundation (NSF) to upgrade the quality of the 1973 Graduate Science Student Support Survey are cited. Changes which were incorporated into the survey were intended to increase the scope and accuracy of data collected. To verify the coverage, a…

Modeling the Secondary Drying Stage of Freeze Drying: Development and Validation of an Excel-Based Model.

PubMed

Sahni, Ekneet K; Pikal, Michael J

2017-03-01

Although several mathematical models of primary drying have been developed over the years, with significant impact on the efficiency of process design, models of secondary drying have been confined to highly complex models. The simple-to-use Excel-based model developed here is, in essence, a series of steady state calculations of heat and mass transfer in the 2 halves of the dry layer where drying time is divided into a large number of time steps, where in each time step steady state conditions prevail. Water desorption isotherm and mass transfer coefficient data are required. We use the Excel "Solver" to estimate the parameters that define the mass transfer coefficient by minimizing the deviations in water content between calculation and a calibration drying experiment. This tool allows the user to input the parameters specific to the product, process, container, and equipment. Temporal variations in average moisture contents and product temperatures are outputs and are compared with experiment. We observe good agreement between experiments and calculations, generally well within experimental error, for sucrose at various concentrations, temperatures, and ice nucleation temperatures. We conclude that this model can serve as an important process development tool for process design and manufacturing problem-solving. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Evaluation of the cold weather plan for England: modelling of cost-effectiveness.

PubMed

Chalabi, Z; Hajat, S; Wilkinson, P; Erens, B; Jones, L; Mays, N

2016-08-01

To determine the conditions under which the Cold Weather Plan (CWP) for England is likely to prove cost-effective in order to inform the development of the CWP in the short term before direct data on costs and benefits can be collected. Mathematical modelling study undertaken in the absence of direct epidemiological evidence on the effect of the CWP in reducing cold-related mortality and morbidity, and limited data or on its costs. The model comprised a simulated temperature time series based on historical data; epidemiologically-derived relationships between temperature, and mortality and morbidity; and information on baseline unit costs of contacts with health care and community care services. Cost-effectiveness was assessed assuming varying levels of protection against cold-related burdens, coverage of the vulnerable population and willingness-to-pay criteria. Simulations showed that the CWP is likely to be cost effective under some scenarios at the high end of the willingness to pay threshold used by National Institute for Health and Care Excellence (NICE) in England, but these results are sensitive to assumptions about the extent of implementation of the CWP at local level, and its assumed effectiveness when implemented. The incremental cost-effectiveness ratio varied from £29,754 to £75,875 per Quality Adjusted Life Year (QALY) gained. Conventional cost-effectiveness (<£30,000/QALY) was reached only when effective targeting of at-risk groups was assumed (i.e. need for low coverage (∼5%) of the population for targeted actions) and relatively high assumed effectiveness (>15%) in avoiding deaths and hospital admissions. Although the modelling relied on a large number of assumptions, this type of modelling is useful for understanding whether, and in what circumstances, untested plans are likely to be cost-effective before they are implemented and in the early period of implementation before direct data on cost-effectiveness have accrued. Steps can then be taken to optimize the relevant parameters as far as practicable during the early implementation period. Copyright © 2015 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Combining controlled-source seismology and receiver function information to derive 3-D Moho topography for Italy

NASA Astrophysics Data System (ADS)

Spada, M.; Bianchi, I.; Kissling, E.; Agostinetti, N. Piana; Wiemer, S.

2013-08-01

The accurate definition of 3-D crustal structures and, in primis, the Moho depth, are the most important requirement for seismological, geophysical and geodynamic modelling in complex tectonic regions. In such areas, like the Mediterranean region, various active and passive seismic experiments are performed, locally reveal information on Moho depth, average and gradient crustal Vp velocity and average Vp/Vs velocity ratios. Until now, the most reliable information on crustal structures stems from controlled-source seismology experiments. In most parts of the Alpine region, a relatively large number of controlled-source seismology information are available though the overall coverage in the central Mediterranean area is still sparse due to high costs of such experiments. Thus, results from other seismic methodologies, such as local earthquake tomography, receiver functions and ambient noise tomography can be used to complement the controlled-source seismology information to increase coverage and thus the quality of 3-D crustal models. In this paper, we introduce a methodology to directly combine controlled-source seismology and receiver functions information relying on the strengths of each method and in relation to quantitative uncertainty estimates for all data to derive a well resolved Moho map for Italy. To obtain a homogeneous elaboration of controlled-source seismology and receiver functions results, we introduce a new classification/weighting scheme based on uncertainty assessment for receiver functions data. In order to tune the receiver functions information quality, we compare local receiver functions Moho depths and uncertainties with a recently derived well-resolved local earthquake tomography-derived Moho map and with controlled-source seismology information. We find an excellent correlation in the Moho information obtained by these three methodologies in Italy. In the final step, we interpolate the controlled-source seismology and receiver functions information to derive the map of Moho topography in Italy and surrounding regions. Our results show high-frequency undulation in the Moho topography of three different Moho interfaces, the European, the Adriatic-Ionian, and the Liguria-Corsica-Sardinia-Tyrrhenia, reflecting the complexity of geodynamical evolution.

The effect of Fe-coverage on the structure, morphology and magnetic properties of α-FeSi2 nanoislands.

PubMed

Tripathi, J K; Garbrecht, M; Kaplan, W D; Markovich, G; Goldfarb, I

2012-12-14

Self-assembled α-FeSi(2) nanoislands were formed using solid-phase epitaxy of low (~1.2 ML) and high (~21 ML) Fe coverages onto vicinal Si(111) surfaces followed by thermal annealing. At a resulting low Fe-covered Si(111) surface, we observed in situ, by real-time scanning tunneling microscopy and surface electron diffraction, the entire sequence of Fe-silicide formation and transformation from the initially two-dimensional (2 × 2)-reconstructed layer at 300 °C into (2 × 2)-reconstructed nanoislands decorating the vicinal step-bunch edges in a self-ordered fashion at higher temperatures. In contrast, the silicide nanoislands at a high Fe-covered surface were noticeably larger, more three-dimensional, and randomly distributed all over the surface. Ex situ x-ray photoelectron spectroscopy and high-resolution transmission electron microscopy indicated the formation of an α-FeSi(2) island phase, in an α-FeSi(2){112} // Si{111} orientation. Superconducting quantum interference device magnetometry showed considerable superparamagnetism, with ~1.9 μ(B)/Fe atom at 4 K for the low Fe-coverage, indicating stronger ferromagnetic coupling of individual magnetic moments, as compared to high Fe-coverage, where the calculated moments were only ~0.8 μ(B)/Fe atom. Such anomalous magnetic behavior, particularly for the low Fe-coverage case, is radically different from the non-magnetic bulk α-FeSi(2) phase, and may open new pathways to high-density magnetic memory storage devices.

Relative Motion of the WDS 05110+3203 STF 648 System, With a Protocol for Calculating Relative Motion

NASA Astrophysics Data System (ADS)

Wiley, E. O.

2010-07-01

Relative motion studies of visual double stars can be investigated using least squares regression techniques and readily accessible programs such as Microsoft Excel and a calculator. Optical pairs differ from physical pairs under most geometries in both their simple scatter plots and their regression models. A step-by-step protocol for estimating the rectilinear elements of an optical pair is presented. The characteristics of physical pairs using these techniques are discussed.

An Efficient, Optimized Synthesis of Fentanyl and Related Analogs

DOE PAGES

Valdez, Carlos A.; Leif, Roald N.; Mayer, Brian P.; ...

2014-09-18

The alternate and optimized syntheses of the parent opioid fentanyl and its analogs are described. The routes presented exhibit high-yielding transformations leading to these powerful analgesics after optimization studies were carried out for each synthetic step. The general three-step strategy produced a panel of four fentanyls in excellent yields (73–78%) along with their more commonly encountered hydrochloride and citric acid salts. In conclusion, the following strategy offers the opportunity for the gram-scale, efficient production of this interesting class of opioid alkaloids.

An Efficient, Optimized Synthesis of Fentanyl and Related Analogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valdez, Carlos A.; Leif, Roald N.; Mayer, Brian P.

The alternate and optimized syntheses of the parent opioid fentanyl and its analogs are described. The routes presented exhibit high-yielding transformations leading to these powerful analgesics after optimization studies were carried out for each synthetic step. The general three-step strategy produced a panel of four fentanyls in excellent yields (73–78%) along with their more commonly encountered hydrochloride and citric acid salts. In conclusion, the following strategy offers the opportunity for the gram-scale, efficient production of this interesting class of opioid alkaloids.

Synthesis of acrylic polymer beads for solid-supported proline-derived organocatalysts.

PubMed

Kristensen, Tor E; Vestli, Kristian; Fredriksen, Kim A; Hansen, Finn K; Hansen, Tore

2009-07-16

A completely non-chromatographic and highly large-scale adaptable synthesis of acrylic polymer beads containing proline and prolineamides has been developed. Novel monomeric proline (meth)acrylates are prepared from hydroxyproline in only one step. Free-radical copolymerization then gives solid-supported proline organocatalysts directly in as little as two steps overall, without using any prefabricated solid supports, by using either droplet or dispersion polymerization. These affordable acrylic beads have highly favorable and adjustable swelling characteristics and are excellent reusable catalysts for organocatalytic reactions.

New Expression for Collisionless Magnetic Reconnection Rate

NASA Technical Reports Server (NTRS)

Klimas, Alexander J.

2014-01-01

For 2D, symmetric, anti-parallel, collisionless magnetic reconnection, a new expression for the reconnection rate in the electron diffusion region is introduced. It is shown that this expression can be derived in just a few simple steps from a physically intuitive starting point; the derivation is given in its entirety and the validity of each step is confirmed. The predictions of this expression are compared to the results of several long-duration, open-boundary PIC reconnection simulations to demonstrate excellent agreement.

Theoretical study of the ammonia nitridation rate on an Fe (100) surface: a combined density functional theory and kinetic Monte Carlo study.

PubMed

Yeo, Sang Chul; Lo, Yu Chieh; Li, Ju; Lee, Hyuck Mo

2014-10-07

Ammonia (NH3) nitridation on an Fe surface was studied by combining density functional theory (DFT) and kinetic Monte Carlo (kMC) calculations. A DFT calculation was performed to obtain the energy barriers (Eb) of the relevant elementary processes. The full mechanism of the exact reaction path was divided into five steps (adsorption, dissociation, surface migration, penetration, and diffusion) on an Fe (100) surface pre-covered with nitrogen. The energy barrier (Eb) depended on the N surface coverage. The DFT results were subsequently employed as a database for the kMC simulations. We then evaluated the NH3 nitridation rate on the N pre-covered Fe surface. To determine the conditions necessary for a rapid NH3 nitridation rate, the eight reaction events were considered in the kMC simulations: adsorption, desorption, dissociation, reverse dissociation, surface migration, penetration, reverse penetration, and diffusion. This study provides a real-time-scale simulation of NH3 nitridation influenced by nitrogen surface coverage that allowed us to theoretically determine a nitrogen coverage (0.56 ML) suitable for rapid NH3 nitridation. In this way, we were able to reveal the coverage dependence of the nitridation reaction using the combined DFT and kMC simulations.

Preformed posterior stainless steel crowns: an update.

PubMed

Croll, T P

1999-02-01

For almost 50 years, dentists have used stainless steel crowns for primary and permanent posterior teeth. No other type of restoration offers the convenience, low cost, durability, and reliability of such crowns when interim full-coronal coverage is required. Preformed stainless steel crowns have improved over the years. Better luting cements have been developed and different methods of crown manipulation have evolved. This article reviews stainless steel crown procedures for primary and permanent posterior teeth. Step-by-step placement of a primary molar stainless steel crown is documented and permanent molar stainless steel crown restoration is described. A method for repairing a worn-through crown also is reviewed.

Study of Nickel Silicide as a Copper Diffusion Barrier in Monocrystalline Silicon Solar Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kale, Abhijit; Beese, Emily; Saenz, Theresa

NiSi as a conductive diffusion barrier to silicon has been studied. We demonstrate that the NiSi films formed using the single step annealing process are as good as the two step process using XRD and Raman. Quality of NiSi films formed using e-beam Ni and electroless Ni process has been compared. Incomplete surface coverage and presence of constituents other than Ni are the main challenges with electroless Ni. We also demonstrate that Cu reduces the thermal stability of NiSi films. The detection of Cu has proven to be difficult due to temperature limitations.

Investigating the Conceptual Variation of Major Physics Textbooks

NASA Astrophysics Data System (ADS)

Stewart, John; Campbell, Richard; Clanton, Jessica

2008-04-01

The conceptual problem content of the electricity and magnetism chapters of seven major physics textbooks was investigated. The textbooks presented a total of 1600 conceptual electricity and magnetism problems. The solution to each problem was decomposed into its fundamental reasoning steps. These fundamental steps are, then, used to quantify the distribution of conceptual content among the set of topics common to the texts. The variation of the distribution of conceptual coverage within each text is studied. The variation between the major groupings of the textbooks (conceptual, algebra-based, and calculus-based) is also studied. A measure of the conceptual complexity of the problems in each text is presented.

Copy number variants calling for single cell sequencing data by multi-constrained optimization.

PubMed

Xu, Bo; Cai, Hongmin; Zhang, Changsheng; Yang, Xi; Han, Guoqiang

2016-08-01

Variations in DNA copy number carry important information on genome evolution and regulation of DNA replication in cancer cells. The rapid development of single-cell sequencing technology allows one to explore gene expression heterogeneity among single-cells, thus providing important cancer cell evolution information. Single-cell DNA/RNA sequencing data usually have low genome coverage, which requires an extra step of amplification to accumulate enough samples. However, such amplification will introduce large bias and makes bioinformatics analysis challenging. Accurately modeling the distribution of sequencing data and effectively suppressing the bias influence is the key to success variations analysis. Recent advances demonstrate the technical noises by amplification are more likely to follow negative binomial distribution, a special case of Poisson distribution. Thus, we tackle the problem CNV detection by formulating it into a quadratic optimization problem involving two constraints, in which the underling signals are corrupted by Poisson distributed noises. By imposing the constraints of sparsity and smoothness, the reconstructed read depth signals from single-cell sequencing data are anticipated to fit the CNVs patterns more accurately. An efficient numerical solution based on the classical alternating direction minimization method (ADMM) is tailored to solve the proposed model. We demonstrate the advantages of the proposed method using both synthetic and empirical single-cell sequencing data. Our experimental results demonstrate that the proposed method achieves excellent performance and high promise of success with single-cell sequencing data. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

An impressive approach to solving the ongoing stability problems of LiCoPO4 cathode: Nickel oxide surface modification with excellent core-shell principle

NASA Astrophysics Data System (ADS)

Örnek, Ahmet

2017-07-01

Nanoscale and NiO-coated LiCoPO4 cathode materials were prepared for the first time by a newly designed three-step synthesis route, which is a combined technique including advantages of the Stöber, hydrothermal and microwave synthesis methods. Using this extraordinary technique, LiCoPO4 particles are coated with a thin NiO layer with a perfect core-shell morphology and the technique's positive contribution to electrochemistry is elucidated in detail. The samples are interpreted using opto-analytical techniques and galvanostatic charge-discharge tests. The high-resolution transmission electron microscopy analysis proves that this well-elaborated technique makes it possible to achieve a continuous NiO surface coverage of 8-10 nm, a result that contributes towards solving the chronic electrochemical problems of 4.8 V cathode material. Our data reveal that NiO-coated LiCoPO4 cathode demonstrates superior cycle stability and specific capacity at relatively low rates. The 2.5% wt. NiO-coated cathode exhibits the best electrochemical property, which reaches a discharge capacity of 159 mAh g-1 at 0.l C current rate and shows almost 85% capacity retention after 80 charge-discharge cycles. It therefore achieves partial success in improving the electrochemical properties of the LiCoPO4 cathode material, which is especially crucial for energy storage to be applied in electric vehicles and plug-in hybrid electric applications.

Building a model: developing genomic resources for common milkweed (Asclepias syriaca) with low coverage genome sequencing

PubMed Central

2011-01-01

Background Milkweeds (Asclepias L.) have been extensively investigated in diverse areas of evolutionary biology and ecology; however, there are few genetic resources available to facilitate and compliment these studies. This study explored how low coverage genome sequencing of the common milkweed (Asclepias syriaca L.) could be useful in characterizing the genome of a plant without prior genomic information and for development of genomic resources as a step toward further developing A. syriaca as a model in ecology and evolution. Results A 0.5× genome of A. syriaca was produced using Illumina sequencing. A virtually complete chloroplast genome of 158,598 bp was assembled, revealing few repeats and loss of three genes: accD, clpP, and ycf1. A nearly complete rDNA cistron (18S-5.8S-26S; 7,541 bp) and 5S rDNA (120 bp) sequence were obtained. Assessment of polymorphism revealed that the rDNA cistron and 5S rDNA had 0.3% and 26.7% polymorphic sites, respectively. A partial mitochondrial genome sequence (130,764 bp), with identical gene content to tobacco, was also assembled. An initial characterization of repeat content indicated that Ty1/copia-like retroelements are the most common repeat type in the milkweed genome. At least one A. syriaca microread hit 88% of Catharanthus roseus (Apocynaceae) unigenes (median coverage of 0.29×) and 66% of single copy orthologs (COSII) in asterids (median coverage of 0.14×). From this partial characterization of the A. syriaca genome, markers for population genetics (microsatellites) and phylogenetics (low-copy nuclear genes) studies were developed. Conclusions The results highlight the promise of next generation sequencing for development of genomic resources for any organism. Low coverage genome sequencing allows characterization of the high copy fraction of the genome and exploration of the low copy fraction of the genome, which facilitate the development of molecular tools for further study of a target species and its relatives. This study represents a first step in the development of a community resource for further study of plant-insect co-evolution, anti-herbivore defense, floral developmental genetics, reproductive biology, chemical evolution, population genetics, and comparative genomics using milkweeds, and A. syriaca in particular, as ecological and evolutionary models. PMID:21542930

Building a model: developing genomic resources for common milkweed (Asclepias syriaca) with low coverage genome sequencing.

PubMed

Straub, Shannon C K; Fishbein, Mark; Livshultz, Tatyana; Foster, Zachary; Parks, Matthew; Weitemier, Kevin; Cronn, Richard C; Liston, Aaron

2011-05-04

Milkweeds (Asclepias L.) have been extensively investigated in diverse areas of evolutionary biology and ecology; however, there are few genetic resources available to facilitate and compliment these studies. This study explored how low coverage genome sequencing of the common milkweed (Asclepias syriaca L.) could be useful in characterizing the genome of a plant without prior genomic information and for development of genomic resources as a step toward further developing A. syriaca as a model in ecology and evolution. A 0.5× genome of A. syriaca was produced using Illumina sequencing. A virtually complete chloroplast genome of 158,598 bp was assembled, revealing few repeats and loss of three genes: accD, clpP, and ycf1. A nearly complete rDNA cistron (18S-5.8S-26S; 7,541 bp) and 5S rDNA (120 bp) sequence were obtained. Assessment of polymorphism revealed that the rDNA cistron and 5S rDNA had 0.3% and 26.7% polymorphic sites, respectively. A partial mitochondrial genome sequence (130,764 bp), with identical gene content to tobacco, was also assembled. An initial characterization of repeat content indicated that Ty1/copia-like retroelements are the most common repeat type in the milkweed genome. At least one A. syriaca microread hit 88% of Catharanthus roseus (Apocynaceae) unigenes (median coverage of 0.29×) and 66% of single copy orthologs (COSII) in asterids (median coverage of 0.14×). From this partial characterization of the A. syriaca genome, markers for population genetics (microsatellites) and phylogenetics (low-copy nuclear genes) studies were developed. The results highlight the promise of next generation sequencing for development of genomic resources for any organism. Low coverage genome sequencing allows characterization of the high copy fraction of the genome and exploration of the low copy fraction of the genome, which facilitate the development of molecular tools for further study of a target species and its relatives. This study represents a first step in the development of a community resource for further study of plant-insect co-evolution, anti-herbivore defense, floral developmental genetics, reproductive biology, chemical evolution, population genetics, and comparative genomics using milkweeds, and A. syriaca in particular, as ecological and evolutionary models.

Detecting free-living steps and walking bouts: validating an algorithm for macro gait analysis.

PubMed

Hickey, Aodhán; Del Din, Silvia; Rochester, Lynn; Godfrey, Alan

2017-01-01

Research suggests wearables and not instrumented walkways are better suited to quantify gait outcomes in clinic and free-living environments, providing a more comprehensive overview of walking due to continuous monitoring. Numerous validation studies in controlled settings exist, but few have examined the validity of wearables and associated algorithms for identifying and quantifying step counts and walking bouts in uncontrolled (free-living) environments. Studies which have examined free-living step and bout count validity found limited agreement due to variations in walking speed, changing terrain or task. Here we present a gait segmentation algorithm to define free-living step count and walking bouts from an open-source, high-resolution, accelerometer-based wearable (AX3, Axivity). Ten healthy participants (20-33 years) wore two portable gait measurement systems; a wearable accelerometer on the lower-back and a wearable body-mounted camera (GoPro HERO) on the chest, for 1 h on two separate occasions (24 h apart) during free-living activities. Step count and walking bouts were derived for both measurement systems and compared. For all participants during a total of almost 20 h of uncontrolled and unscripted free-living activity data, excellent relative (rho  ⩾  0.941) and absolute (ICC (2,1)   ⩾  0.975) agreement with no presence of bias were identified for step count compared to the camera (gold standard reference). Walking bout identification showed excellent relative (rho  ⩾  0.909) and absolute agreement (ICC (2,1)   ⩾  0.941) but demonstrated significant bias. The algorithm employed for identifying and quantifying steps and bouts from a single wearable accelerometer worn on the lower-back has been demonstrated to be valid and could be used for pragmatic gait analysis in prolonged uncontrolled free-living environments.

Estimated effects of adding universal public coverage of an essential medicines list to existing public drug plans in Canada.

PubMed

Morgan, Steven G; Li, Winny; Yau, Brandon; Persaud, Nav

2017-02-27

Canada's universal health care system does not include universal coverage of prescription drugs. We sought to estimate the effects of adding universal public coverage of an essential medicines list to existing public drug plans in Canada. We used administrative and market research data to estimate the 2015 shares of the volume and cost of prescriptions filled in the community setting that were for 117 drugs on a model list of essential medicines for Canada. We compared prices of these essential medicines in Canada with prices in the United States, Sweden and New Zealand. We estimated the cost of adding universal public drug coverage of these essential medicines based on anticipated effects on medication use and pricing. The 117 essential medicines on the model list accounted for 44% of all prescriptions and 30% of total prescription drug expenditures in 2015. Average prices of generic essential medicines were 47% lower in the US, 60% lower in Sweden and 84% lower in New Zealand; brand-name drugs were priced 43% lower in the US. Estimated savings from universal public coverage of these essential medicines was $4.27 billion per year (range $2.72 billion to $5.83 billion; 28% reduction) for patients and private drug plan sponsors, at an incremental government cost of $1.23 billion per year (range $373 million to $1.98 billion; 11% reduction). Our analysis showed that adding universal public coverage of essential medicines to the existing public drug plans in Canada could address most of Canadians' pharmaceutical needs and save billions of dollars annually. Doing so may be a pragmatic step forward while more comprehensive pharmacare reforms are planned. © 2017 Canadian Medical Association or its licensors.

The current status of positron emission tomography.

PubMed

Digby, W; Keppler, J

2000-01-01

Positron emission tomography (PET), invented over 25 years ago, is the only imaging technique that provides images of the biological basis of disease. Since disease is a biological process, PET routinely detects disease when other imaging studies, such as CT and MRI, are normal. In addition to its clinical effectiveness, PET has been shown to reduce costs, primarily due to the elimination of other less accurate diagnostic tests and ineffective surgeries. PET has been determined to be applicable to a number of specific applications in the areas of: imaging cancer patients, characterizing myocardial blood flow and viability, and brain imaging in various physiological and pathologic conditions. Tremendous progress has been made in resolving the regulatory and reimbursement issues facing the field of PET. Working with HCFA, representatives of the Institute for Clinical PET and the Society of Nuclear Medicine have brought about expanded HCFA coverage for PET. When HCFA first authorized payment for PET, all coverage decisions were restricted to HCFA and an expanded national coverage policy. HCFA revised its national coverage policy in 1997; this was the first of several steps taken by HCFA towards careful expansion of PET reimbursement. In March 1999, three new indications for whole-body PET scans were added to Medicare's coverage policy. The Institute for Clinical PET is continuing to work with HCFA on continued, appropriate expansion of the coverage policy. This article is partially excerpted from a written statement made by Terry Douglass, Ph.D., president of CTI, Inc., on May 12, 1999, before the Senate Committee on Commerce, Science and Transportation and its Subcommittee on Science, Technology and Space. This was part of the committee's study of "Emerging Technologies in the New Millennium."

Remaining missed opportunities of child survival in Peru: modelling mortality impact of universal and equitable coverage of proven interventions.

PubMed

Tam, Yvonne; Huicho, Luis; Huayanay-Espinoza, Carlos A; Restrepo-Méndez, María Clara

2016-10-04

Peru has made great improvements in reducing stunting and child mortality in the past decade, and has reached the Millennium Development Goals 1 and 4. The remaining challenges or missed opportunities for child survival needs to be identified and quantified, in order to guide the next steps to further improve child survival in Peru. We used the Lives Saved Tool (LiST) to project the mortality impact of proven interventions reaching every women and child in need, and the mortality impact of eliminating inequalities in coverage distribution between wealth quintiles and urban-rural residence. Our analyses quantified the remaining missed opportunities in Peru, where prioritizing scale-up of facility-based case management for all small and sick babies will be most effective in mortality reduction, compared to other evidenced-based interventions that prevent maternal and child deaths. Eliminating coverage disparities between the poorest quintiles and the richest will reduce under-five and neonatal mortality by 22.0 and 40.6 %, while eliminating coverage disparities between those living in rural and urban areas will reduce under-five and neonatal mortality by 29.3 and 45.2 %. This projected neonatal mortality reduction achieved by eliminating coverage disparities is almost comparable to that already achieved by Peru over the past decade. Although Peru has made great strides in improving child survival, further improvement in child health, especially in newborn health can be achieved if there is universal and equitable coverage of proven, quality health facility-based interventions. The magnitude of reduction in mortality will be similar to what has been achieved in the past decade. Strengthening health system to identify, understand, and direct resources to the poor and rural areas will ensure that Peru achieve the Sustainable Development Goals by 2030.

A simple test of choice stepping reaction time for assessing fall risk in people with multiple sclerosis.

PubMed

Tijsma, Mylou; Vister, Eva; Hoang, Phu; Lord, Stephen R

2017-03-01

Purpose To determine (a) the discriminant validity for established fall risk factors and (b) the predictive validity for falls of a simple test of choice stepping reaction time (CSRT) in people with multiple sclerosis (MS). Method People with MS (n = 210, 21-74y) performed the CSRT, sensorimotor, balance and neuropsychological tests in a single session. They were then followed up for falls using monthly fall diaries for 6 months. Results The CSRT test had excellent discriminant validity with respect to established fall risk factors. Frequent fallers (≥3 falls) performed significantly worse in the CSRT test than non-frequent fallers (0-2 falls). With the odds of suffering frequent falls increasing 69% with each SD increase in CSRT (OR = 1.69, 95% CI: 1.27-2.26, p = <0.001). In regression analysis, CSRT was best explained by sway, time to complete the 9-Hole Peg test, knee extension strength of the weaker leg, proprioception and the time to complete the Trails B test (multiple R 2   =   0.449, p < 0.001). Conclusions A simple low tech CSRT test has excellent discriminative and predictive validity in relation to falls in people with MS. This test may prove useful in documenting longitudinal changes in fall risk in relation to MS disease progression and effects of interventions. Implications for rehabilitation Good choice stepping reaction time (CSRT) is required for maintaining balance. A simple low-tech CSRT test has excellent discriminative and predictive validity in relation to falls in people with MS. This test may prove useful documenting longitudinal changes in fall risk in relation to MS disease progression and effects of interventions.

Self-healing gold mirrors and filters at liquid-liquid interfaces

NASA Astrophysics Data System (ADS)

Smirnov, Evgeny; Peljo, Pekka; Scanlon, Micheál D.; Gumy, Frederic; Girault, Hubert H.

2016-03-01

The optical and morphological properties of lustrous metal self-healing liquid-like nanofilms were systematically studied for different applications (e.g., optical mirrors or filters). These nanofilms were formed by a one-step self-assembly methodology of gold nanoparticles (AuNPs) at immiscible water-oil interfaces, previously reported by our group. We investigated a host of experimental variables and herein report their influence on the optical properties of nanofilms: AuNP mean diameter, interfacial AuNP surface coverage, nature of the organic solvent, and nature of the lipophilic organic molecule that caps the AuNPs in the interfacial nanofilm. To probe the interfacial gold nanofilms we used in situ (UV-vis-NIR spectroscopy and optical microscopy) as well as ex situ (SEM and TEM of interfacial gold nanofilms transferred to silicon substrates) techniques. The interfacial AuNP surface coverage strongly influenced the morphology of the interfacial nanofilms, and in turn their maximum reflectance and absorbance. We observed three distinct morphological regimes; (i) smooth 2D monolayers of ``floating islands'' of AuNPs at low surface coverages, (ii) a mixed 2D/3D regime with the beginnings of 3D nanostructures consisting of small piles of adsorbed AuNPs even under sub-full-monolayer conditions and, finally, (iii) a 3D regime characterised by the 2D full-monolayer being covered in significant piles of adsorbed AuNPs. A maximal value of reflectance reached 58% in comparison with a solid gold mirror, when 38 nm mean diameter AuNPs were used at a water-nitrobenzene interface. Meanwhile, interfacial gold nanofilms prepared with 12 nm mean diameter AuNPs exhibited the highest extinction intensities at ca. 690 nm and absorbance around 90% of the incident light, making them an attractive candidate for filtering applications. Furthermore, the interparticle spacing, and resulting interparticle plasmon coupling derived optical properties, varied significantly on replacing tetrathiafulvalene with neocuproine as the AuNP capping ligand in the nanofilm. These interfacial nanofilms formed with neocuproine and 38 nm mean diameter AuNPs, at monolayer surface coverages and above, were black due to aggregation and broadband absorbance.The optical and morphological properties of lustrous metal self-healing liquid-like nanofilms were systematically studied for different applications (e.g., optical mirrors or filters). These nanofilms were formed by a one-step self-assembly methodology of gold nanoparticles (AuNPs) at immiscible water-oil interfaces, previously reported by our group. We investigated a host of experimental variables and herein report their influence on the optical properties of nanofilms: AuNP mean diameter, interfacial AuNP surface coverage, nature of the organic solvent, and nature of the lipophilic organic molecule that caps the AuNPs in the interfacial nanofilm. To probe the interfacial gold nanofilms we used in situ (UV-vis-NIR spectroscopy and optical microscopy) as well as ex situ (SEM and TEM of interfacial gold nanofilms transferred to silicon substrates) techniques. The interfacial AuNP surface coverage strongly influenced the morphology of the interfacial nanofilms, and in turn their maximum reflectance and absorbance. We observed three distinct morphological regimes; (i) smooth 2D monolayers of ``floating islands'' of AuNPs at low surface coverages, (ii) a mixed 2D/3D regime with the beginnings of 3D nanostructures consisting of small piles of adsorbed AuNPs even under sub-full-monolayer conditions and, finally, (iii) a 3D regime characterised by the 2D full-monolayer being covered in significant piles of adsorbed AuNPs. A maximal value of reflectance reached 58% in comparison with a solid gold mirror, when 38 nm mean diameter AuNPs were used at a water-nitrobenzene interface. Meanwhile, interfacial gold nanofilms prepared with 12 nm mean diameter AuNPs exhibited the highest extinction intensities at ca. 690 nm and absorbance around 90% of the incident light, making them an attractive candidate for filtering applications. Furthermore, the interparticle spacing, and resulting interparticle plasmon coupling derived optical properties, varied significantly on replacing tetrathiafulvalene with neocuproine as the AuNP capping ligand in the nanofilm. These interfacial nanofilms formed with neocuproine and 38 nm mean diameter AuNPs, at monolayer surface coverages and above, were black due to aggregation and broadband absorbance. Electronic supplementary information (ESI) available: Interfacial tension measurements for various water-organic solvent systems, step-by-step optical microscopy and SEM characterization of the obtained film, optical photographs of all tested solvents and molecules, and influence of the interfacial tension on optical responses of AuNPs assemblies. See DOI: 10.1039/c6nr00371k

Pelvic Nodal Dosing With Registration to the Prostate: Implications for High-Risk Prostate Cancer Patients Receiving Stereotactic Body Radiation Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kishan, Amar U., E-mail: aukishan@mednet.ucla.edu; Lamb, James M.; Jani, Shyam S.

2015-03-15

Purpose: To determine whether image guidance with rigid registration (RR) to intraprostatic markers (IPMs) yields acceptable coverage of the pelvic lymph nodes in the context of a stereotactic body radiation therapy (SBRT) regimen. Methods and Materials: Four to seven kilovoltage cone-beam CTs (CBCTs) from 12 patients with high-risk prostate cancer were analyzed, allowing approximation of an SBRT regimen. The nodal clinical target volume (CTV{sub N}) and bladder were contoured on all kilovoltage CBCTs. The V{sub 100} CTV{sub N}, expressed as a ratio to the same parameter on the initial plan, and the magnitude of translational shift between RR to themore » IPMs versus RR to the pelvic bones, were computed. The ability of a multimodality bladder filling protocol to minimize bladder height variation was assessed in a separate cohort of 4 patients. Results: Sixty-five CBCTs were assessed. The average V{sub 100} CTV{sub N} was 92.6%, but for a subset of 3 patients the average was 80.0%, compared with 97.8% for the others (P<.0001). The average overall and superior–inferior axis magnitudes of the bony-to-fiducial translations were significantly larger in the subgroup with suboptimal nodal coverage (8.1 vs 3.9 mm and 5.8 vs 2.4 mm, respectively; P<.0001). Relative bladder height changes were also significantly larger in the subgroup with suboptimal nodal coverage (42.9% vs 18.5%; P<.05). Use of a multimodality bladder-filling protocol minimized bladder height variation (P<.001). Conclusion: A majority of patients had acceptable nodal coverage after RR to IPMs, even when approximating SBRT. However, a subset of patients had suboptimal nodal coverage. These patients had large bony-to-fiducial translations and large variations in bladder height. Nodal coverage should be excellent if the superior–inferior axis bony-to-fiducial translation and the relative bladder height change (both easily measured on CBCT) are kept to a minimum. Implementation of a strict bladder filling protocol may achieve this goal.« less

Evolution of health coverage in Mexico: evidence of progress and challenges in the Mexican health system.

PubMed

Urquieta-Salomón, José E; Villarreal, Héctor J

2016-02-01

To consolidate an effective and efficient universal health care coverage requires a deep understanding of the challenges faced by the health care system in providing services demanded by population in need. This study analyses the dynamics of health insurance coverage and effective access coverage to some health interventions in Mexico. It examines the evolution of inequalities and heterogeneous performance of the insurance subsystems incorporated under the Mexican health care system. Two types of coverage indicators were selected: health insurance and effective access to preventive health interventions intended for normative population. Data were drawn from National Health and Nutrition Surveys 2006 and 2012. The economic inequality was estimated using the Standardized Concentration Index by household per capita consumption expenditure as socioeconomic-status indicator. Approximately 75% of the population reported being covered by one of the existing insurance schemes, representing a huge step forward from 2006, when as much as 51.62% of the population had no health insurance. About 87% of this growth was attributable to the expansion of Non Contributory Health Insurance whereas 7% emanated from the Social Security subsystem. The results revealed that inequality in access to health insurance was virtually eradicated; however, traces of unequal access persisted in some subpopulations groups. Coverage indicators of effective access showed a slight improvement in the period analysed, but prenatal care and interventions to prevent chronic disease still presented a serious shortage. Furthermore, there was no evidence that inequities in coverage of these interventions have decreased in recent years. The results provided a mixed picture, generalizable to the system as a whole, expansion of insurance status represents one of the most remarkable advances that have not been accompanied by a significant improvement in effective access. In addition, existing inequalities are part of the most important challenges to be faced by the Mexican health system. © The Author 2015. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Ab initio study of the adsorption, diffusion, and intercalation of alkali metal atoms on the (0001) surface of the topological insulator Bi{sub 2}Se{sub 3}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryabishchenkova, A. G., E-mail: ryaange@gmail.com; Otrokov, M. M.; Kuznetsov, V. M.

2015-09-15

Ab initio study of the adsorption, diffusion, and intercalation of alkali metal adatoms on the (0001) step surface of the topological insulator Bi{sub 2}Se{sub 3} has been performed for the case of low coverage. The calculations of the activation energies of diffusion of adatoms on the surface and in van der Waals gaps near steps, as well as the estimate of diffusion lengths, have shown that efficient intercalation through steps is possible only for Li and Na. Data obtained for K, Rb, and Cs atoms indicate that their thermal desorption at high temperatures can occur before intercalation. The results havemore » been discussed in the context of existing experimental data.« less

Count every newborn; a measurement improvement roadmap for coverage data.

PubMed

Moxon, Sarah G; Ruysen, Harriet; Kerber, Kate J; Amouzou, Agbessi; Fournier, Suzanne; Grove, John; Moran, Allisyn C; Vaz, Lara M E; Blencowe, Hannah; Conroy, Niall; Gülmezoglu, A; Vogel, Joshua P; Rawlins, Barbara; Sayed, Rubayet; Hill, Kathleen; Vivio, Donna; Qazi, Shamim A; Sitrin, Deborah; Seale, Anna C; Wall, Steve; Jacobs, Troy; Ruiz Peláez, Juan; Guenther, Tanya; Coffey, Patricia S; Dawson, Penny; Marchant, Tanya; Waiswa, Peter; Deorari, Ashok; Enweronu-Laryea, Christabel; Arifeen, Shams; Lee, Anne C C; Mathai, Matthews; Lawn, Joy E

2015-01-01

The Every Newborn Action Plan (ENAP), launched in 2014, aims to end preventable newborn deaths and stillbirths, with national targets of ≤12 neonatal deaths per 1000 live births and ≤12 stillbirths per 1000 total births by 2030. This requires ambitious improvement of the data on care at birth and of small and sick newborns, particularly to track coverage, quality and equity. In a multistage process, a matrix of 70 indicators were assessed by the Every Newborn steering group. Indicators were graded based on their availability and importance to ENAP, resulting in 10 core and 10 additional indicators. A consultation process was undertaken to assess the status of each ENAP core indicator definition, data availability and measurement feasibility. Coverage indicators for the specific ENAP treatment interventions were assigned task teams and given priority as they were identified as requiring the most technical work. Consultations were held throughout. ENAP published 10 core indicators plus 10 additional indicators. Three core impact indicators (neonatal mortality rate, maternal mortality ratio, stillbirth rate) are well defined, with future efforts needed to focus on improving data quantity and quality. Three core indicators on coverage of care for all mothers and newborns (intrapartum/skilled birth attendance, early postnatal care, essential newborn care) have defined contact points, but gaps exist in measuring content and quality of the interventions. Four core (antenatal corticosteroids, neonatal resuscitation, treatment of serious neonatal infections, kangaroo mother care) and one additional coverage indicator for newborns at risk or with complications (chlorhexidine cord cleansing) lack indicator definitions or data, especially for denominators (population in need). To address these gaps, feasible coverage indicator definitions are presented for validity testing. Measurable process indicators to help monitor health service readiness are also presented. A major measurement gap exists to monitor care of small and sick babies, yet signal functions could be tracked similarly to emergency obstetric care. The ENAP Measurement Improvement Roadmap (2015-2020) outlines tools to be developed (e.g., improved birth and death registration, audit, and minimum perinatal dataset) and actions to test, validate and institutionalise proposed coverage indicators. The roadmap presents a unique opportunity to strengthen routine health information systems, crosslinking these data with civil registration and vital statistics and population-based surveys. Real measurement change requires intentional transfer of leadership to countries with the greatest disease burden and will be achieved by working with centres of excellence and existing networks.

Application of COMSOL to Acoustic Imaging

DTIC Science & Technology

2010-10-01

Marquardt (LM) (2 epochs), followed by Broyden, Fletcher, Goldfarb, and Shannon (BFGS) (2 epochs) followed by scaled conjugate gradient ( SCG )(100...Use Matlab’s excellent Neural Network Toolbox  Optimization techniques considered:  Scaled‏Con jugate‏ Gradient‏ (“ SCG ”)‏ - fast  One‏Step

Portrait of a Remarkable School.

ERIC Educational Resources Information Center

Lutz, J. P.; And Others

1989-01-01

President Ronald Reagan honored the Gulf Elementary School of Cape Coral, Florida, for national excellence and achievement. The school followed four major steps to success: (1) build an academic foundation; (2) establish, monitor, and maintain high expectations; (3) build positive discipline; and (4) provide academic enrichment. (SI)

Catch Them Before They Fall.

ERIC Educational Resources Information Center

Dundes, Lauren; Perlow, Robyn; Brown, Bethany

2000-01-01

Because adolescent girls' faltering confidence affects their academic performance and their social and emotional lives, after-school intervention programs are warranted. Mature enough to balance camaraderie with control, college students can develop excellent rapport with this population. Finding a student coordinator is a first step. (Contains 20…

One-step synthesis of multi-emission carbon nanodots for ratiometric temperature sensing

NASA Astrophysics Data System (ADS)

Nguyen, Vanthan; Yan, Lihe; Xu, Huanhuan; Yue, Mengmeng

2018-01-01

Measuring temperature with greater precision at localized small length scales or in a nonperturbative manner is a necessity in widespread applications, such as integrated photonic devices, micro/nano electronics, biology, and medical diagnostics. To this context, use of nanoscale fluorescent temperature probes is regarded as the most promising method for temperature sensing because they are noninvasive, accurate, and enable remote micro/nanoscale imaging. Here, we propose a novel ratiometric fluorescent sensor for nanothermometry using carbon nanodots (C-dots). The C-dots were synthesized by one-step method using femtosecond laser ablation and exhibit unique multi-emission property due to emissions from abundant functional groups on its surface. The as-prepared C-dots demonstrate excellent ratiometric temperature sensing under single wavelength excitation that achieves high temperature sensitivity with a 1.48% change per °C ratiometric response over wide-ranging temperature (5-85 °C) in aqueous buffer. The ratiometric sensor shows excellent reversibility and stability, holding great promise for the accurate measurement of temperature in many practical applications.

BEARKIMPE-2: A VBA Excel program for characterizing granular iron in treatability studies

NASA Astrophysics Data System (ADS)

Firdous, R.; Devlin, J. F.

2014-02-01

The selection of a suitable kinetic model to investigate the reaction rate of a contaminant with granular iron (GI) is essential to optimize the permeable reactive barrier (PRB) performance in terms of its reactivity. The newly developed Kinetic Iron Model (KIM) determines the surface rate constant (k) and sorption parameters (Cmax &J) which were not possible to uniquely identify previously. The code was written in Visual Basic (VBA), within Microsoft Excel, was adapted from earlier command line FORTRAN codes, BEARPE and KIMPE. The program is organized with several user interface screens (UserForms) that guide the user step by step through the analysis. BEARKIMPE-2 uses a non-linear optimization algorithm to calculate transport and chemical kinetic parameters. Both reactive and non-reactive sites are considered. A demonstration of the functionality of BEARKIMPE-2, with three nitroaromatic compounds showed that the differences in reaction rates for these compounds could be attributed to differences in their sorption behavior rather than their propensities to accept electrons in the reduction process.

One-step assembly of Fe(III)-CMC chelate hydrogel onto nanoneedle-like CuO@Cu membrane with superhydrophilicity for oil-water separation

NASA Astrophysics Data System (ADS)

Dai, Jiangdong; Chang, Zhongshuai; Xie, Atian; Zhang, Ruilong; Tian, Sujun; Ge, Wenna; Yan, Yongsheng; Li, Chunxiang; Xu, Wei; Shao, Rong

2018-05-01

The research of superhydrophilic interface is developing rapidly, but the preparations of superhydrophilic surfaces through simple methods are still challenging. Herein, we reported a facile, rapid and environmentally-friendly approach for preparing a novel superhydrophilic and underwater superoleophobic membrane via the thermal oxidation of Cu mesh and one-step coordinated assembly of Fe(III)-CMC chelate hydrogel. Superhydrophilicity was attributed to the hydrophilicity of Fe(III)-CMC chelate hydrogel and nanoneedle-like rough structure of CuO@Cu membrane. The membrane was used to separate a variety of oil/water mixtures and exhibited excellent separation performance. Moreover, the membrane exhibited the excellent durability and superior stability against corrosion conditions. We envision that the Fe(III)-CMC@CuO@Cu membrane with good underwater superoleophobicity could provide a candidate not only for oil/water separation but also many other potential applications such as underwater oil manipulation, self-clean, and bio-adhesion control.

Quantifying the impact of immediate reconstruction in postmastectomy radiation: a large, dose-volume histogram-based analysis.

PubMed

Ohri, Nisha; Cordeiro, Peter G; Keam, Jennifer; Ballangrud, Ase; Shi, Weiji; Zhang, Zhigang; Nerbun, Claire T; Woch, Katherine M; Stein, Nicholas F; Zhou, Ying; McCormick, Beryl; Powell, Simon N; Ho, Alice Y

2012-10-01

To assess the impact of immediate breast reconstruction on postmastectomy radiation (PMRT) using dose-volume histogram (DVH) data. Two hundred forty-seven women underwent PMRT at our center, 196 with implant reconstruction and 51 without reconstruction. Patients with reconstruction were treated with tangential photons, and patients without reconstruction were treated with en-face electron fields and customized bolus. Twenty percent of patients received internal mammary node (IMN) treatment. The DVH data were compared between groups. Ipsilateral lung parameters included V20 (% volume receiving 20 Gy), V40 (% volume receiving 40 Gy), mean dose, and maximum dose. Heart parameters included V25 (% volume receiving 25 Gy), mean dose, and maximum dose. IMN coverage was assessed when applicable. Chest wall coverage was assessed in patients with reconstruction. Propensity-matched analysis adjusted for potential confounders of laterality and IMN treatment. Reconstruction was associated with lower lung V20, mean dose, and maximum dose compared with no reconstruction (all P<.0001). These associations persisted on propensity-matched analysis (all P<.0001). Heart doses were similar between groups (P=NS). Ninety percent of patients with reconstruction had excellent chest wall coverage (D95 >98%). IMN coverage was superior in patients with reconstruction (D95 >92.0 vs 75.7%, P<.001). IMN treatment significantly increased lung and heart parameters in patients with reconstruction (all P<.05) but minimally affected those without reconstruction (all P>.05). Among IMN-treated patients, only lower lung V20 in those without reconstruction persisted (P=.022), and mean and maximum heart doses were higher than in patients without reconstruction (P=.006, P=.015, respectively). Implant reconstruction does not compromise the technical quality of PMRT when the IMNs are untreated. Treatment technique, not reconstruction, is the primary determinant of target coverage and normal tissue doses. Published by Elsevier Inc.

Estimated Budget Impact of Adopting the Affordable Care Act's Required Smoking Cessation Coverage on United States Healthcare Payers.

PubMed

Baker, Christine L; Ferrufino, Cheryl P; Bruno, Marianna; Kowal, Stacey

2017-01-01

Despite abundant information on the negative impacts of smoking, more than 40 million adult Americans continue to smoke. The Affordable Care Act (ACA) requires tobacco cessation as a preventive service with no patient cost share for all FDA-approved cessation medications. Health plans have a vital role in supporting smoking cessation by managing medication access, but uncertainty remains on the gaps between smoking cessation requirements and what is actually occurring in practice. This study presents current cessation patterns, real-world drug costs and plan benefit design data, and estimates the 1- to 5-year pharmacy budget impact of providing ACA-required coverage for smoking cessation products to understand the fiscal impact to a US healthcare plan. A closed cohort budget impact model was developed in Microsoft Excel ® to estimate current and projected costs for US payers (commercial, Medicare, Medicaid) covering smoking cessation medicines, with assumptions for coverage and smoking cessation product utilization based on current, real-world national and state-level trends for hypothetical commercial, Medicare, and Medicaid plans with 1 million covered lives. A Markov methodology with five health states captures quit attempt and relapse patterns. Results include the number of smokers attempting to quit, number of successful quitters, annual costs, and cost per-member per-month (PMPM). The projected PMPM cost of providing coverage for smoking cessation medications is $0.10 for commercial, $0.06 for Medicare, and $0.07 for Medicaid plans, reflecting a low incremental PMPM impact of covering two attempts ranging from $0.01 for Medicaid to $0.02 for commercial and Medicare payers. The projected PMPM impact of covering two quit attempts with access to all seven cessation medications at no patient cost share remains low. Results of this study reinforce that the impact of adopting the ACA requirements for smoking cessation coverage will have a limited near-term impact on health plan's budgets. Pfizer Inc.

Colorimetric carbon dioxide detector to determine accidental tracheal feeding tube placement.

PubMed

Howes, Daniel W; Shelley, Eric S; Pickett, William

2005-04-01

To determine the accuracy of colorimetric CO2 detection compared to the reference standard two-step radiological confirmation of feeding tube position. A prospective study was conducted with patients presenting to a 21-bed medical-surgical intensive care unit. An adapter was developed using an endotracheal tube adapter to connect a colorimetric CO2 detector to a feeding tube in an airtight manner. In part I of the study a feeding tube connected to the colorimeter was inserted into the endotracheal tubes of ten ventilated patients to test the device's ability to detect tracheal placement. In part II patients undergoing feeding tube insertion had tube position confirmed with the colorimeter as well as the reference standard two-step x-ray. In phase I the colorimeter correctly identified tracheal placement in all ten patients. In phase II 93/100 procedures ultimately were eligible; the colorimeter had a sensitivity of 0.88 (95% confidence interval: 0.65-1.00) and specificity of 0.99 (0.97-1.00). The device missed one of the eight tracheal placements. Agreement between the colorimeter and two-step x-ray interpretations was excellent (Kappa 0.86; standard error 0.10). We describe a novel, convenient method to confirm esophageal feeding tube placement. The device is easily assembled and inexpensive, but should not be reused. Colorimetric determination of tracheal feeding tube placement with this device has excellent agreement with the reference standard two-step radiological technique.

Comprehensive Immunosuppressive Drug Coverage for Kidney Transplant Patients Act of 2011

THOMAS, 112th Congress

Rep. Burgess, Michael C. [R-TX-26

2011-09-20

House - 09/26/2011 Referred for a period ending not later than September 26, 2011, (or for a later time if the Chairman so designates) to the Subcommittee on Health, in each case for consideration of such provisions as fall within the jurisdiction of the subcommittee concerned. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A bill to amend title 38, United States Code, to provide for coverage under the beneficiary travel program of the Department of Veterans Affairs of certain disabled veterans for travel in connection with certain special disabilities rehabilitation, and for other purposes.

THOMAS, 113th Congress

Sen. Tester, Jon [D-MT

2013-03-21

Senate - 05/09/2013 Committee on Veterans' Affairs. Hearings held. Hearings printed: S.Hrg. 113-203. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A bill to amend title 38, United States Code, to provide for coverage under the beneficiary travel program of the Department of Veterans Affairs of certain disabled veterans for travel for certain special disabilities rehabilitation, and for other purposes.

THOMAS, 112th Congress

Sen. Tester, Jon [D-MT

2011-10-20

Senate - 06/27/2012 Committee on Veterans' Affairs. Hearings held. Hearings printed: S.Hrg. 112-668. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A bill to amend title 10, United States Code, to provide for continuity of TRICARE Standard coverage for certain members of the Retired Reserve.

THOMAS, 111th Congress

Sen. Nelson, Ben [D-NE

2009-03-26

Senate - 03/26/2009 Read twice and referred to the Committee on Armed Services. (All Actions) Notes: For further action, see H.R.2647, which became Public Law 111-84 on 10/28/2009. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

To require health insurance coverage for the treatment of infertility.

THOMAS, 112th Congress

Rep. DeLauro, Rosa L. [D-CT-3

2018-05-24

House - 05/24/2018 Referred to the Committee on Energy and Commerce, and in addition to the Committees on Oversight and Government Reform, Armed Services, and Veterans' Affairs, for a period to be subsequently determined by the Speaker, in each case for consideration of such... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

CO-CO coupling on Cu facets: Coverage, strain and field effects

DOE PAGES

Sandberg, Robert B.; Montoya, Joseph H.; Chan, Karen; ...

2016-08-21

We present a DFT study on the effect of coverage, strain, and electric field on CO-CO coupling energetics on Cu (100), (111), and (211). Our calculations indicate that CO-CO coupling is facile on all three facets in the presence of a cation-induced electric field in the Helmholtz plane, with the lowest barrier on Cu(100). The CO dimerization pathway is therefore expected to play a role in C 2 formation at potentials negative of the Cu potential of zero charge, corresponding to CO 2/CO reduction conditions at high pH. Both increased *CO coverage and tensile strain further improve C-C coupling energeticsmore » on Cu (111) and (211). Since CO dimerization is facile on all 3 Cu facets, subsequent surface hydrogenation steps may also play an important role in determining the overall activity towards C 2 products. Adsorption of *CO, *H, and *OH on the 3 facets were investigated with a Pourbaix analysis. Here, the (211) facet has the largest propensity to co-adsorb *CO and *H, which would favor surface hydrogenation following CO dimerization.« less

Tunable solid-state lasers - An emerging technology for remote sensing of planetary atmospheres

NASA Technical Reports Server (NTRS)

Barnes, Norman P.; Allario, Frank

1988-01-01

The present development status and prospective (1990s) performance-improvement evaluation of tunable solid-state laser technology notes recent trends toward spectrum coverage over the 0.20-14.0 microns range, in addition to dramatic increases in efficiency, service life, and reliability. It is judged that the Ti:Al2O3 laser and the AgGaSe2 optical parametric oscillator pumped by a Ho:YAG laser could cover the near-IR and mid-IR regions of the spectrum. Laser diodes operating at 0.78 microns should provide an excellent pump for a Ho:YAG laser.

Redefining the management of pediatric tonsillopharyngitis with cefprozil.

PubMed

Jerath, Nameet; Shetty, Ganesh

2007-12-01

Tonsillopharyngitis is very common in children, with Group A Streptococci being the most common bacterial etiology. Effective antibacterial treatment is imperative due to risk of rheumatic fever. Cephalosporins have been used successfully for the treatment of Group A beta-hemolytic Streptococcal (GABHS) tonsillopharyngitis. Cefprozil is a novel broad-spectrum oral cephalosporin. Cefprozil is rapidly absorbed from the gastrointestinal tract with high bioavailability. The excellent penetration of cefprozil into tonsillar and adenoidal tissue corresponds well with the clinical outcome. The drug provides excellent coverage against both gram-negative and -positive bacteria that may cause pharyngitis/tonsillitis. The beta-lactamase stability of cefprozil appears to exceed that of other oral cephalosporins for important gram negative pathogens. In clinical trials, cefprozil appears to be at least as effective as commonly used comparison agents such as cefaclor and cefixime. Additionally, cefprozil is better tolerated than the latter, especially with regard to gastrointestinal adverse effects. Thus cefprozil can be considered a safe and reliable drug for the treatment of Streptococcal tonsillopharyngitis in children.

Systematic and progressive implementation of the centers of excellence for rheumatoid arthritis: a methodological proposal.

PubMed

Santos-Moreno, Pedro; Caballero-Uribe, Carlo V; Massardo, Maria Loreto; Maldonado, Claudio Galarza; Soriano, Enrique R; Pineda, Carlos; Cardiel, Mario; Benavides, Juan Alberto; Beltrán, Paula Andrea

2017-12-01

The implementation of excellence centers in specific diseases has been gaining recognition in the field of health; specifically in rheumatoid arthritis, where the prognosis of the disease is related to an early diagnosis and a timely intervention, it is necessary that the provision of health services is developed in an environment of quality, opportunity, and safety with the highest standards of care. A methodology that allows this implementation in such a way that is achievable by the most of the care centers is a priority to achieve a better attention to populations with this disease. In this paper, we propose a systematic and progressive methodology that will help all the institutions to develop successful models without faltering in the process. The expected impact on public health is defined by a better effective coverage of high-quality treatments, obtaining better health outcomes with safety and accessibility that reduces the budgetary impact for the health systems of our countries.

Family structure and child health outcomes in the United States.

PubMed

Bass, Loretta E; Warehime, M Nicole

2011-01-01

We use categorical and logistic regression models to investigate the extent that family structure affects children’s health outcomes at age five (i.e., child’s type of health insurance coverage, the use of a routine medical doctor, and report of being in excellent health) using a sample of 4,898 children from the "Fragile Families and Child Well-Being Study." We find that children with married biological parents are most likely to have private health insurance compared with each of three other relationship statuses. With each additional child in the home, a child is less likely to have private insurance compared with no insurance and Medicaid insurance. Children with cohabiting biological parents are less likely to have a routine doctor compared with children of married biological parents, yet having additional children in the household is not associated with having a routine doctor. Children with biological parents who are not romantically involved and those with additional children in the household are less likely to be in excellent health, all else being equal.

Generating Variable and Random Schedules of Reinforcement Using Microsoft Excel Macros

PubMed Central

Bancroft, Stacie L; Bourret, Jason C

2008-01-01

Variable reinforcement schedules are used to arrange the availability of reinforcement following varying response ratios or intervals of time. Random reinforcement schedules are subtypes of variable reinforcement schedules that can be used to arrange the availability of reinforcement at a constant probability across number of responses or time. Generating schedule values for variable and random reinforcement schedules can be difficult. The present article describes the steps necessary to write macros in Microsoft Excel that will generate variable-ratio, variable-interval, variable-time, random-ratio, random-interval, and random-time reinforcement schedule values. PMID:18595286

Six Sigma and Lean concepts, a case study: patient centered care model for a mammography center.

PubMed

Viau, Mark; Southern, Becky

2007-01-01

Boca Raton Community Hospital in South Florida decided to increase return while enhancing patient experience and increasing staff morale. They implemented a program to pursue "enterprise excellence" through Six Sigma methodologies. In order to ensure the root causes to delays and rework were addressed, a multigenerational project plan with 3 major components was developed. Step 1: Stabilize; Step 2: Optimize; Step 3: Innovate. By including staff and process owners in the process, they are empowered to think differently about what they do and how they do it. A team that works collaboratively to identify problems and develop solutions can only be a positive to any organization.

Ultra-sensitive and selective Hg{sup 2+} detection based on fluorescent carbon dots

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Ruihua; Li, Haitao; Kong, Weiqian

2013-07-15

Graphical abstract: Fluorescent carbon dots were efficiently synthesized by one-step sodium hydroxide-assisted reflux method from PEG and demonstrated to show high selectivity toward Hg2+ ions detection. - Highlights: • FCDs were synthesized by one-step sodium hydroxide-assisted reflux method from PEG. • The FCDs emit blue photoluminescence and have upconversion fluorescent property. • The FCDs show ultra-sensitive detective ability for Hg{sup 2+} ions. - Abstract: Fluorescent carbon dots (FCDs) were efficiently synthesized by one-step sodium hydroxide-assisted reflux method from poly(ethylene glycol) (PEG). The obtained FCDs exhibit excellent water-solubility and high stability. Under the UV irradiation, the FCDs could emit bright bluemore » photoluminescence, and also they were found to show excellent up-conversion fluorescence. It was further demonstrated that such FCDs can serve as effective fluorescent sensing platform for Hg{sup 2+} ions detection with ultra-sensitivity and selectivity. The sensing system achieved a limit of detection as low as 1 fM, which is much lower than all the previous reported sensing systems for Hg{sup 2+} ions detection. This FCDs sensing system has been successfully applied for the analysis of Hg{sup 2+} ions in water samples from river, lake, and tap water, showing good practical feasibility.« less

Systematic Assessment of Seven Solvent and Solid-Phase Extraction Methods for Metabolomics Analysis of Human Plasma by LC-MS

NASA Astrophysics Data System (ADS)

Sitnikov, Dmitri G.; Monnin, Cian S.; Vuckovic, Dajana

2016-12-01

The comparison of extraction methods for global metabolomics is usually executed in biofluids only and focuses on metabolite coverage and method repeatability. This limits our detailed understanding of extraction parameters such as recovery and matrix effects and prevents side-by-side comparison of different sample preparation strategies. To address this gap in knowledge, seven solvent-based and solid-phase extraction methods were systematically evaluated using standard analytes spiked into both buffer and human plasma. We compared recovery, coverage, repeatability, matrix effects, selectivity and orthogonality of all methods tested for non-lipid metabolome in combination with reversed-phased and mixed-mode liquid chromatography mass spectrometry analysis (LC-MS). Our results confirmed wide selectivity and excellent precision of solvent precipitations, but revealed their high susceptibility to matrix effects. The use of all seven methods showed high overlap and redundancy which resulted in metabolite coverage increases of 34-80% depending on LC-MS method employed as compared to the best single extraction protocol (methanol/ethanol precipitation) despite 7x increase in MS analysis time and sample consumption. The most orthogonal methods to methanol-based precipitation were ion-exchange solid-phase extraction and liquid-liquid extraction using methyl-tertbutyl ether. Our results help facilitate rational design and selection of sample preparation methods and internal standards for global metabolomics.

Systematic Assessment of Seven Solvent and Solid-Phase Extraction Methods for Metabolomics Analysis of Human Plasma by LC-MS

PubMed Central

Sitnikov, Dmitri G.; Monnin, Cian S.; Vuckovic, Dajana

2016-01-01

The comparison of extraction methods for global metabolomics is usually executed in biofluids only and focuses on metabolite coverage and method repeatability. This limits our detailed understanding of extraction parameters such as recovery and matrix effects and prevents side-by-side comparison of different sample preparation strategies. To address this gap in knowledge, seven solvent-based and solid-phase extraction methods were systematically evaluated using standard analytes spiked into both buffer and human plasma. We compared recovery, coverage, repeatability, matrix effects, selectivity and orthogonality of all methods tested for non-lipid metabolome in combination with reversed-phased and mixed-mode liquid chromatography mass spectrometry analysis (LC-MS). Our results confirmed wide selectivity and excellent precision of solvent precipitations, but revealed their high susceptibility to matrix effects. The use of all seven methods showed high overlap and redundancy which resulted in metabolite coverage increases of 34–80% depending on LC-MS method employed as compared to the best single extraction protocol (methanol/ethanol precipitation) despite 7x increase in MS analysis time and sample consumption. The most orthogonal methods to methanol-based precipitation were ion-exchange solid-phase extraction and liquid-liquid extraction using methyl-tertbutyl ether. Our results help facilitate rational design and selection of sample preparation methods and internal standards for global metabolomics. PMID:28000704

Mushroom-free selective epitaxial growth of Si, SiGe and SiGe:B raised sources and drains

NASA Astrophysics Data System (ADS)

Hartmann, J. M.; Benevent, V.; Barnes, J. P.; Veillerot, M.; Lafond, D.; Damlencourt, J. F.; Morvan, S.; Prévitali, B.; Andrieu, F.; Loubet, N.; Dutartre, D.

2013-05-01

We have evaluated various Cyclic Selective Epitaxial Growth/Etch (CSEGE) processes in order to grow "mushroom-free" Si and SiGe:B Raised Sources and Drains (RSDs) on each side of ultra-short gate length Extra-Thin Silicon-On-Insulator (ET-SOI) transistors. The 750 °C, 20 Torr Si CSEGE process we have developed (5 chlorinated growth steps with four HCl etch steps in-between) yielded excellent crystalline quality, typically 18 nm thick Si RSDs. Growth was conformal along the Si3N4 sidewall spacers, without any poly-Si mushrooms on top of unprotected gates. We have then evaluated on blanket 300 mm Si(001) wafers the feasibility of a 650 °C, 20 Torr SiGe:B CSEGE process (5 chlorinated growth steps with four HCl etch steps in-between, as for Si). As expected, the deposited thickness decreased as the total HCl etch time increased. This came hands in hands with unforeseen (i) decrease of the mean Ge concentration (from 30% down to 26%) and (ii) increase of the substitutional B concentration (from 2 × 1020 cm-3 up to 3 × 1020 cm-3). They were due to fluctuations of the Ge concentration and of the atomic B concentration [B] in such layers (drop of the Ge% and increase of [B] at etch step locations). Such blanket layers were a bit rougher than layers grown using a single epitaxy step, but nevertheless of excellent crystalline quality. Transposition of our CSEGE process on patterned ET-SOI wafers did not yield the expected results. HCl etch steps indeed helped in partly or totally removing the poly-SiGe:B mushrooms on top of the gates. This was however at the expense of the crystalline quality and 2D nature of the ˜45 nm thick Si0.7Ge0.3:B recessed sources and drains selectively grown on each side of the imperfectly protected poly-Si gates. The only solution we have so far identified that yields a lesser amount of mushrooms while preserving the quality of the S/D is to increase the HCl flow during growth steps.

Discretization vs. Rounding Error in Euler's Method

ERIC Educational Resources Information Center

Borges, Carlos F.

2011-01-01

Euler's method for solving initial value problems is an excellent vehicle for observing the relationship between discretization error and rounding error in numerical computation. Reductions in stepsize, in order to decrease discretization error, necessarily increase the number of steps and so introduce additional rounding error. The problem is…

Nurturing Argumentation and Reasoning with Pentominoes

ERIC Educational Resources Information Center

Edwards, Michael Todd; Meagher, Michael S.; Özgün-Koca, S. Asli

2017-01-01

Middle school students need opportunities to craft informal mathematical arguments beyond justification of steps in an algorithm. Pentominoes provide an excellent vehicle for such activity. In this article, the authors describe an exploration with pentominoes that engaged a group of ninth-grade students in proportional reasoning, dilation, and…

The Westerhaus Way

ERIC Educational Resources Information Center

Roach, Ronald

2006-01-01

In 2005, the NCAA took a significant step towards combating one of the most consistent criticisms in intercollegiate athletics. Despite the growing visibility of women's sports and the abundance of excellent minority student-athletes, most of the top college coaching and athletic administration jobs have remained largely closed off to both women…

The role of helical tomotherapy in the treatment of bone plasmacytoma.

PubMed

Chargari, Cyrus; Hijal, Tarek; Bouscary, Didier; Caussa, Lucas; Dendale, Remi; Zefkili, Sofia; Fourquet, Alain; Kirova, Youlia M

2012-01-01

We evaluated the early clinical outcome of patients with solitary bone plasmacytoma (SP) or a solitary lesion of multiple myeloma (MM) treated with helical tomotherapy (HT) compared with 3D conformal radiotherapy (3D-CRT), in terms of target coverage and exposure of critical organs. Ten patients with SP and 3 patients with a solitary lesion of MM underwent radiation therapy (RT) delivered by HT, to a dose of 40 Gy in 20 fractions. Treatment planning was then performed with 3D-CRT and the dosimetric parameters of both techniques were compared. Patients were also assessed for response to treatment and acute toxicities. With a median follow-up of 13 months, 78% of patients with pain before RT had resolution of their symptoms. Coverage of target lesion was adequate with both techniques in 12 of 13 patients. Target coverage was significantly lower for HT (V(95%) = 98.55% vs. 97.15%; p = 0.04, for 3D-CRT and HT, respectively). Target overdoses were also lower with HT (V(105%) = 2.01% vs. 0.19%; p= 0.16), although nonsignificant. Finally, there were no significant differences in organs-at-risk irradiation between both techniques. The early treatment tolerance was excellent, with no toxicity higher than grade I. RT of SP and MM with a solitary lesion can be safely delivered with HT, with no major acute side effects and good symptomatic control. Finally, HT provides a dosimetry similar to that of 3D-CRT in terms of organs-at-risk sparing and target volume coverage. Copyright © 2012 American Association of Medical Dosimetrists. Published by Elsevier Inc. All rights reserved.

Restricted Field IMRT Dramatically Enhances IMRT Planning for Mesothelioma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, Aaron M.; Schofield, Deborah; Hacker, Fred

2007-12-01

Purpose: To improve the target coverage and normal tissue sparing of intensity-modulated radiotherapy (IMRT) for mesothelioma after extrapleural pneumonectomy. Methods and Materials: Thirteen plans from patients previously treated with IMRT for mesothelioma were replanned using a restricted field technique. This technique was novel in two ways. It limited the entrance beams to 200{sup o} around the target and three to four beams per case had their field apertures restricted down to the level of the heart or liver to further limit the contralateral lung dose. New constraints were added that included a mean lung dose of <9.5 Gy and volumemore » receiving {>=}5 Gy of <55%. Results: In all cases, the planning target volume coverage was excellent, with an average of 97% coverage of the planning target volume by the target dose. No change was seen in the target coverage with the new technique. The heart, kidneys, and esophagus were all kept under tolerance in all cases. The average mean lung dose, volume receiving {>=}20 Gy, and volume receiving {>=}5 Gy with the new technique was 6.6 Gy, 3.0%, and 50.8%, respectively, compared with 13.8 Gy, 15%, and 90% with the previous technique (p < 0.0001 for all three comparisons). The maximal value for any case in the cohort was 8.0 Gy, 7.3%, and 57.5% for the mean lung dose, volume receiving {>=}20 Gy, and volume receiving {>=}5 Gy, respectively. Conclusion: Restricted field IMRT provides an improved method to deliver IMRT to a complex target after extrapleural pneumonectomy. An upcoming Phase I trial will provide validation of these results.« less

Breast conserving treatment for breast cancer: dosimetric comparison of different non-invasive techniques for additional boost delivery

PubMed Central

2014-01-01

Background Today it is unclear which technique for delivery of an additional boost after whole breast radiotherapy for breast conserved patients should be state of the art. We present a dosimetric comparison of different non-invasive treatment techniques for additional boost delivery. Methods For 10 different tumor bed localizations, 7 different non-invasive treatment plans were made. Dosimetric comparison of PTV-coverage and dose to organs at risk was performed. Results The Vero system achieved an excellent PTV-coverage and at the same time could minimize the dose to the organs at risk with an average near-maximum-dose (D2) to the heart of 0.9 Gy and the average volume of ipsilateral lung receiving 5 Gy (V5) of 1.5%. The TomoTherapy modalities delivered an average D2 to the heart of 0.9 Gy for the rotational and of 2.3 Gy for the static modality and an average V5 to the ipsilateral lung of 7.3% and 2.9% respectively. A rotational technique offers an adequate conformity at the cost of more low dose spread and a larger build-up area. In most cases a 2-field technique showed acceptable PTV-coverage, but a bad conformity. Electrons often delivered a worse PTV-coverage than photons, with the planning requirements achieved only in 2 patients and with an average D2 to the heart of 2.8 Gy and an average V5 to the ipsilateral lung of 5.8%. Conclusions We present advices which can be used as guidelines for the selection of the best individualized treatment. PMID:24467916

Predicting and comparing long-term measles antibody profiles of different immunization policies.

PubMed

Lee, M S; Nokes, D J

2001-01-01

Measles outbreaks are infrequent and localized in areas with high coverage of measles vaccine. The need is to assess long-term effectiveness of coverage. Since 1991, no measles epidemic affecting the whole island has occurred in Taiwan, China. Epidemiological models are developed to predict the long-term measles antibody profiles and compare the merits of different immunization policies on the island. The current measles immunization policy in Taiwan, China, is 1 dose of measles vaccine at 9 months of age and 1 dose of measles, mumps and rubella (MMR) vaccine at 15 months of age, plus a 'mop-up' of MMR-unvaccinated schoolchildren at 6 years of age. Refinements involve a change to a two-dose strategy. Five scenarios based on different vaccination strategies are compared. The models are analysed using Microsoft Excel. First, making the assumption that measles vaccine-induced immunity will not wane, the predicted measles IgG seroprevalences in preschool children range from 81% (lower bound) to 94% (upper bound) and in schoolchildren reach 97-98% in all strategy scenarios. Results are dependent on the association of vaccine coverage between the first and second dose of vaccine. Second, if it is assumed that vaccine-induced antibody titres decay, the long-term measles seroprevalence will depend on the initial titres post vaccination, decay rates of antibody titres and cut-off of seropositivity. If MMR coverage at 12 months of age can reach > 90%, it would be worth changing the current policy to 2 doses at 12 months and 6 years of age to induce higher antibody titres. These epidemiological models could be applied wherever a similar stage of measles elimination has been reached.

Risk factors for low vaccination coverage among Roma children in disadvantaged settlements in Belgrade, Serbia.

PubMed

Stojanovski, Kristefer; McWeeney, Gerry; Emiroglu, Nedret; Ostlin, Piroska; Koller, Theadora; Licari, Lucianne; Kaluski, Dorit Nitzan

2012-08-10

Full vaccination coverage for children under 59 months of age in Serbia is over 90%. This study assesses vaccination coverage and examines its association with birth registration among Roma children who resided in disadvantaged settlements in Belgrade, Serbia. The First Roma Health and Nutrition Survey in Belgrade settlements, 2009, was conducted among households of 468 Roma children between the ages of 6-59 months. The 2005 WHO Immunization Coverage Cluster Survey sampling methodology was employed. Vaccinations were recorded using children's vaccination cards and through verification steps carried out in the Primary Health Care Centers. For those who had health records the information on vaccination was recorded. About 88% of children had vaccination cards. The mean rate of age appropriate full immunization was 16% for OPV and DTP and 14.3% for MMR. Multivariate analyses indicated that children whose births were registered with the civil authorities were more likely to have their vaccination cards [OR=6.1, CI (2.5, 15.0)] and to have their full, age appropriate, series vaccinations for DTP, OPV, MMR and HepB [OR=3.8, CI (1.5, 10.0), OR=3.2, CI (1.5, 6.6), OR=4.8, CI (1.1, 21.0), OR=5.4, CI (1.4, 21.6), respectively]. The immunization coverage among Roma children in settlements is far below the WHO/UNICEF MDG4 target in achieving prevention and control of vaccine preventable diseases. It demonstrates the need to include "invisible" populations into the health systems in continuous, integrated, comprehensive, accessible and sensitive modes. Copyright © 2012 Elsevier Ltd. All rights reserved.

Sci-Thur PM - Colourful Interactions: Highlights 08: ARC TBI using Single-Step Optimized VMAT Fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hudson, Alana; Gordon, Deborah; Moore, Roseanne

Purpose: This work outlines a new TBI delivery technique to replace a lateral POP full bolus technique. The new technique is done with VMAT arc delivery, without bolus, treating the patient prone and supine. The benefits of the arc technique include: increased patient experience and safety, better dose conformity, better organ at risk sparing, decreased therapist time and reduction of therapist injuries. Methods: In this work we build on a technique developed by Jahnke et al. We use standard arc fields with gantry speeds corrected for varying distance to the patient followed by a single step VMAT optimization on amore » patient CT to increase dose inhomogeneity and to reduce dose to the lungs (vs. blocks). To compare the arc TBI technique to our full bolus technique, we produced plans on patient CTs for both techniques and evaluated several dosimetric parameters using an ANOVA test. Results and Conclusions: The arc technique is able reduce both the hot areas to the body (D2% reduced from 122.2% to 111.8% p<0.01) and the lungs (mean lung dose reduced from 107.5% to 99.1%, p<0.01), both statistically significant, while maintaining coverage (D98% = 97.8% vs. 94.6%, p=0.313, not statistically significant). We developed a more patient and therapist-friendly TBI treatment technique that utilizes single-step optimized VMAT plans. It was found that this technique was dosimetrically equivalent to our previous lateral technique in terms of coverage and statistically superior in terms of reduced lung dose.« less

a Fast Approach for Stitching of Aerial Images

NASA Astrophysics Data System (ADS)

Moussa, A.; El-Sheimy, N.

2016-06-01

The last few years have witnessed an increasing volume of aerial image data because of the extensive improvements of the Unmanned Aerial Vehicles (UAVs). These newly developed UAVs have led to a wide variety of applications. A fast assessment of the achieved coverage and overlap of the acquired images of a UAV flight mission is of great help to save the time and cost of the further steps. A fast automatic stitching of the acquired images can help to visually assess the achieved coverage and overlap during the flight mission. This paper proposes an automatic image stitching approach that creates a single overview stitched image using the acquired images during a UAV flight mission along with a coverage image that represents the count of overlaps between the acquired images. The main challenge of such task is the huge number of images that are typically involved in such scenarios. A short flight mission with image acquisition frequency of one second can capture hundreds to thousands of images. The main focus of the proposed approach is to reduce the processing time of the image stitching procedure by exploiting the initial knowledge about the images positions provided by the navigation sensors. The proposed approach also avoids solving for all the transformation parameters of all the photos together to save the expected long computation time if all the parameters were considered simultaneously. After extracting the points of interest of all the involved images using Scale-Invariant Feature Transform (SIFT) algorithm, the proposed approach uses the initial image's coordinates to build an incremental constrained Delaunay triangulation that represents the neighborhood of each image. This triangulation helps to match only the neighbor images and therefore reduces the time-consuming features matching step. The estimated relative orientation between the matched images is used to find a candidate seed image for the stitching process. The pre-estimated transformation parameters of the images are employed successively in a growing fashion to create the stitched image and the coverage image. The proposed approach is implemented and tested using the images acquired through a UAV flight mission and the achieved results are presented and discussed.

Initial experience with the world's first digital drainage system. The benefits of recording air leaks with graphic representation.

PubMed

Dernevik, Leif; Belboul, Ali; Rådberg, Göran

2007-02-01

To evaluate the clinical efficacy of a new digital drainage system, the DigiVent Chest Drainage System that gives accurate measurements of air leakage and pleural pressures and can display those measurements over time. The DigiVent Chest Drainage System was tested in three steps: Step 1; first clinical use in five patients, Step 2; management and acceptance in further 15 patients and Step 3; reliability in routine use in 50 patients. The results from Steps 1 and 2 showed that the system was good enough for extended use. The results from Step 3 showed excellent clinical performance, however, we experienced device malfunctions in four cases without any consequences for the patients. The cause of the malfunctions was identified and steps taken to prevent their further occurrence. The ability of the DigiVent to measure airflow and present mean values for 1, 3 and 6h proved to be very practical. The ability to save data and present curves for the entire course of treatment will be an advantage for research in the field of lung surgery.

Mid-infrared Photoconductive Response in AlGaN/GaN Step Quantum Wells

PubMed Central

Rong, X.; Wang, X. Q.; Chen, G.; Zheng, X. T.; Wang, P.; Xu, F. J.; Qin, Z. X.; Tang, N.; Chen, Y. H.; Sang, L. W.; Sumiya, M.; Ge, W. K.; Shen, B.

2015-01-01

AlGaN/GaN quantum structure is an excellent candidate for high speed infrared detectors based on intersubband transitions. However, fabrication of AlGaN/GaN quantum well infrared detectors suffers from polarization-induced internal electric field, which greatly limits the carrier vertical transport. In this article, a step quantum well is proposed to attempt solving this problem, in which a novel spacer barrier layer is used to balance the internal electric field. As a result, a nearly flat band potential profile is obtained in the step barrier layers of the AlGaN/GaN step quantum wells and a bound-to-quasi-continuum (B-to-QC) type intersubband prototype device with detectable photocurrent at atmosphere window (3–5 μm) is achieved in such nitride semiconductors. PMID:26395756

Theoretical study of the ammonia nitridation rate on an Fe (100) surface: A combined density functional theory and kinetic Monte Carlo study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeo, Sang Chul; Lee, Hyuck Mo, E-mail: hmlee@kaist.ac.kr; Lo, Yu Chieh

2014-10-07

Ammonia (NH{sub 3}) nitridation on an Fe surface was studied by combining density functional theory (DFT) and kinetic Monte Carlo (kMC) calculations. A DFT calculation was performed to obtain the energy barriers (E{sub b}) of the relevant elementary processes. The full mechanism of the exact reaction path was divided into five steps (adsorption, dissociation, surface migration, penetration, and diffusion) on an Fe (100) surface pre-covered with nitrogen. The energy barrier (E{sub b}) depended on the N surface coverage. The DFT results were subsequently employed as a database for the kMC simulations. We then evaluated the NH{sub 3} nitridation rate onmore » the N pre-covered Fe surface. To determine the conditions necessary for a rapid NH{sub 3} nitridation rate, the eight reaction events were considered in the kMC simulations: adsorption, desorption, dissociation, reverse dissociation, surface migration, penetration, reverse penetration, and diffusion. This study provides a real-time-scale simulation of NH{sub 3} nitridation influenced by nitrogen surface coverage that allowed us to theoretically determine a nitrogen coverage (0.56 ML) suitable for rapid NH{sub 3} nitridation. In this way, we were able to reveal the coverage dependence of the nitridation reaction using the combined DFT and kMC simulations.« less

Amphibious fluorescent carbon dots: one-step green synthesis and application for light-emitting polymer nanocomposites.

PubMed

Zhou, Li; He, Benzhao; Huang, Jiachang

2013-09-21

A facile and green approach for the synthesis of amphibious fluorescent carbon dots (CDs) from natural polysaccharide is reported. Light-emitting polymer nanocomposites with excellent optical performance can be easily prepared by incorporation of the amphibious CDs into the polymer matrix.

Derek Bok after 20 Years at Harvard's Helm: An Interview.

ERIC Educational Resources Information Center

Chronicle of Higher Education, 1990

1990-01-01

The interview with Derek Bok addresses his reasons for stepping down from the Harvard presidency; cost-cutting efforts at Harvard; "selective excellence" as a planning principle; current needs of Harvard; corruption of higher education by corporate ties; the changing college presidency; and the role of ethical considerations in decision…

PNC Invests in Excellence

ERIC Educational Resources Information Center

Weinstein, Margery

2011-01-01

For The PNC Financial Services Group, Inc., last year proved the perfect backdrop for meeting learning and development goals as the company completed the largest acquisition in its history. While training and development have always been a priority for PNC, in 2010 the company climbed one step higher. The acquisition of National City…

Quality Measures in Distance Learning.

ERIC Educational Resources Information Center

Husson, William J.; Waterman, Ellen K.

2002-01-01

The director of distance learning at Regis University in Colorado reflects on steps that must be taken to assure that university-level e-learning courses are the same quality as traditional courses. Key areas include: qualified faculty, teaching excellence, course design (with the added components of production as they apply to the application of…

Analysis of Seattle Contract Proposals

ERIC Educational Resources Information Center

National Council on Teacher Quality, 2010

2010-01-01

The proposal by the Seattle Public Schools (SPS) for its new teachers' contract is an excellent first step in improving the quality of teachers in the school district. The district's proposal targets many of the problems identified in the October 2009 report "Human Capital in Seattle Public Schools". Most notably it addresses two key…

A resolution recognizing the University of Southern Mississippi for 100 years of service and excellence in higher education.

THOMAS, 111th Congress

Sen. Cochran, Thad [R-MS

2010-03-26

Senate - 03/26/2010 Submitted in the Senate, considered, and agreed to without amendment and with a preamble by Unanimous Consent. (All Actions) Tracker: This bill has the status Agreed to in SenateHere are the steps for Status of Legislation:

Navigating the Net for Grant Money.

ERIC Educational Resources Information Center

Schnitzer, Denise K.

1996-01-01

The Internet offers educators a wealth of grant resources and information on securing funds for projects. The first step is finding a funding source whose goals match those of the desired project's. Certain Net search engines have excellent capabilities. Grantsweb has accessible, organized links to federal and nonfederal grants sources. Other…

Excellence in Schooling: Effective Styles for Effective Schools.

ERIC Educational Resources Information Center

Georgiades, William D. H.

School principals are an important factor in the improvement of American schools. Key findings of two studies show that principals are the most significant people in the educational change process. Outlined are seven important steps involved in the process of instructional improvement that will take place only if committed and knowledgeable…

On Fences, Forms and Mathematical Modeling

ERIC Educational Resources Information Center

Lege, Jerry

2009-01-01

The white picket fence is an integral component of the iconic American townscape. But, for mathematics students, it can be a mathematical challenge. Picket fences in a variety of styles serve as excellent sources to model constant, step, absolute value, and sinusoidal functions. "Principles and Standards for School Mathematics" (NCTM 2000)…

[Contribution of the scrotal flap for the coverage of ischial and perineal pressure ulcers].

PubMed

Vantomme, M; Viard, R; Aimard, R; Vincent, P-L; Comparin, J-P; Voulliaume, D

2018-04-11

The ischiatric pressure sore is a common pathology in rehabilitated spinal cord injured people, despite careful prevention. Medical treatment by discharge and directed healing is not always sufficient and surgery using local musculocutaneous flaps is often essential. Unfortunately, recidivism is frequent and the availability of local flaps is limited. The scrotal flap is an excellent complement to classic flaps, gluteal flaps or hamstrings. It can be used alone or in addition to another musculocutaneous flap, in first or second intention. The scrotal flap is a musculocutaneous flap, using the Dartos, the platys muscle of the scrotum. It is richly vascularized, extensible and resistant. Its great plasticity makes it adaptable to any form of loss of substance, with an arc of rotation that can reach the anal margin. It can also be desepidermized and buried to fill a deep defect. Ten cases of scrotal flaps and their different indications are reviewed: some are used in first intention, others in addition to musculocutaneous flaps. The removal of a scrotal flap is fast and extremely easy. The simple closure of the donor site allows the sampling of half of the scrotum due to the great local laxity. The scrotal flaps achieved quickly healed, as well as the donor sites. Only one recurrence was observed after an inappropriate treatment of underlying osteitis. No complications have occurred. The scrotal musculocutaneous flap, reliable, resistant, quick and easy to remove is an excellent means of coverage of the perineal region. It can be used for the treatment of any loss of perineal substance in humans, but remains particularly useful for the treatment of ischial or perineal pressure sores. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

High-dose and extended-field intensity modulated radiation therapy for early-stage NK/T-cell lymphoma of Waldeyer's ring: dosimetric analysis and clinical outcome.

PubMed

Bi, Xi-Wen; Li, Ye-Xiong; Fang, Hui; Jin, Jing; Wang, Wei-Hu; Wang, Shu-Lian; Liu, Yue-Ping; Song, Yong-Wen; Ren, Hua; Dai, Jian-Rong

2013-12-01

To assess the dosimetric benefit, treatment outcome, and toxicity of high-dose and extended-field intensity modulated radiation therapy (IMRT) in patients with early-stage NK/T-cell lymphoma of Waldeyer's ring (WR-NKTCL). Thirty patients with early-stage WR-NKTCL who received extended-field IMRT were retrospectively reviewed. The prescribed dose was 50 Gy to the primary involved regions and positive cervical lymph nodes (planning target volume requiring radical irradiation [PTV50]) and 40 Gy to the negative cervical nodes (PTV40). Dosimetric parameters for the target volume and critical normal structures were evaluated. Locoregional control (LRC), overall survival (OS), and progression-free survival (PFS) were calculated using the Kaplan-Meier method. The median mean doses to the PTV50 and PTV40 were 53.2 Gy and 43.0 Gy, respectively. Only 1.4% of the PTV50 and 0.9% of the PTV40 received less than 95% of the prescribed dose, indicating excellent target coverage. The average mean doses to the left and right parotid glands were 27.7 and 28.4 Gy, respectively. The 2-year OS, PFS, and LRC rates were 71.2%, 57.4%, and 87.8%. Most acute toxicities were grade 1 to 2, except for grade ≥3 dysphagia and mucositis. The most common late toxicity was grade 1-2 xerostomia, and no patient developed any ≥grade 3 late toxicities. A correlation between the mean dose to the parotid glands and the degree of late xerostomia was observed. IMRT achieves excellent target coverage and dose conformity, as well as favorable survival and locoregional control rates with acceptable toxicities in patients with WR-NKTCL. Copyright © 2013 Elsevier Inc. All rights reserved.

Monitoring Technology Misuse & Abuse: A Five-Step Plan for Creating a Digital Citizenship Program in Your School

ERIC Educational Resources Information Center

Ribble, Mike S.; Bailey, Gerald D.

2004-01-01

Over the last two years, it has become evident that a behavior pattern of misuse and abuse with respect to technology is beginning to emerge in society. This outbreak of technology misuse and abuse is documented in continual news coverage on TV, in newspapers and on the Internet--both inside and outside of schools. The endless list of misuse and…

A bill to clarify the health care provided by the Secretary of Veterans Affairs that constitutes minimum essential coverage.

THOMAS, 111th Congress

Sen. Akaka, Daniel K. [D-HI

2010-03-24

Senate - 09/23/2010 Message received in the Senate: Returned to the Senate pursuant to the provisions of H.Res. 1653. (All Actions) Notes: For further action, see H.R.5014, which became Public Law 111-173 on 5/27/2010. Tracker: This bill has the status Passed SenateHere are the steps for Status of Legislation:

Sequential protein extraction as an efficient method for improved proteome coverage in larvae of Atlantic salmon (Salmo salar).

PubMed

Nuez-Ortín, Waldo G; Carter, Chris G; Nichols, Peter D; Wilson, Richard

2016-07-01

Understanding diet- and environmentally induced physiological changes in fish larvae is a major goal for the aquaculture industry. Proteomic analysis of whole fish larvae comprising multiple tissues offers considerable potential but is challenging due to the very large dynamic range of protein abundance. To extend the coverage of the larval phase of the Atlantic salmon (Salmo salar) proteome, we applied a two-step sequential extraction (SE) method, based on differential protein solubility, using a nondenaturing buffer containing 150 mM NaCl followed by a denaturing buffer containing 7 M urea and 2 M thiourea. Extracts prepared using SE and one-step direct extraction were characterized via label-free shotgun proteomics using nanoLC-MS/MS (LTQ-Orbitrap). SE partitioned the proteins into two fractions of approximately equal amounts, but with very distinct protein composition, leading to identification of ∼40% more proteins than direct extraction. This fractionation strategy enabled the most detailed characterization of the salmon larval proteome to date and provides a platform for greater understanding of physiological changes in whole fish larvae. The MS data are available via the ProteomeXchange Consortium PRIDE partner repository, dataset PXD003366. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

High-performance perovskite CH3NH3PbI3 thin films for solar cells prepared by single-source physical vapour deposition

PubMed Central

Fan, Ping; Gu, Di; Liang, Guang-Xing; Luo, Jing-Ting; Chen, Ju-Long; Zheng, Zhuang-Hao; Zhang, Dong-Ping

2016-01-01

In this work, an alternative route to fabricating high-quality CH3NH3PbI3 thin films is proposed. Single-source physical vapour deposition (SSPVD) without a post-heat-treating process was used to prepare CH3NH3PbI3 thin films at room temperature. This new process enabled complete surface coverage and moisture stability in a non-vacuum solution. Moreover, the challenges of simultaneously controlling evaporation processes of the organic and inorganic sources via dual-source vapour evaporation and the heating process required to obtain high crystallization were avoided. Excellent composition with stoichiometry transferred from the powder material, a high level of tetragonal phase-purity, full surface coverage, well-defined grain structure, high crystallization and reproducibility were obtained. A PCE of approximately 10.90% was obtained with a device based on SSPVD CH3NH3PbI3. These initial results suggest that SSPVD is a promising method to significantly optimize perovskite CH3NH3PbI3 solar cell efficiency. PMID:27426686

Expressing the human proteome for affinity proteomics: optimising expression of soluble protein domains and in vivo biotinylation.

PubMed

Keates, Tracy; Cooper, Christopher D O; Savitsky, Pavel; Allerston, Charles K; Phillips, Claire; Hammarström, Martin; Daga, Neha; Berridge, Georgina; Mahajan, Pravin; Burgess-Brown, Nicola A; Müller, Susanne; Gräslund, Susanne; Gileadi, Opher

2012-06-15

The generation of affinity reagents to large numbers of human proteins depends on the ability to express the target proteins as high-quality antigens. The Structural Genomics Consortium (SGC) focuses on the production and structure determination of human proteins. In a 7-year period, the SGC has deposited crystal structures of >800 human protein domains, and has additionally expressed and purified a similar number of protein domains that have not yet been crystallised. The targets include a diversity of protein domains, with an attempt to provide high coverage of protein families. The family approach provides an excellent basis for characterising the selectivity of affinity reagents. We present a summary of the approaches used to generate purified human proteins or protein domains, a test case demonstrating the ability to rapidly generate new proteins, and an optimisation study on the modification of >70 proteins by biotinylation in vivo. These results provide a unique synergy between large-scale structural projects and the recent efforts to produce a wide coverage of affinity reagents to the human proteome. Copyright © 2011 Elsevier B.V. All rights reserved.

Pre-coalescence scaling of graphene island sizes

NASA Astrophysics Data System (ADS)

Das, Shantanu; Drucker, Jeff

2018-05-01

Graphene grown using cold-wall chemical vapor deposition on Cu surfaces follows a classical nucleation and growth mechanism. Following nucleation at the earliest growth stages, isolated crystallites grow, impinge, and coalesce to form a continuous layer. During the pre-coalescence growth regime, the size distributions of graphene crystallites exhibit scaling of the form N(s) = θ/⟨s⟩2 g(s/⟨s⟩), where s is the island area, θ is the graphene coverage, ⟨s⟩ is the average island area, N is the areal density, and g(x) is a scaling function. For graphene grown on Cu surfaces that have been annealed in a reducing Ar + H2 ambient, excellent data collapse onto a universal Avrami scaling function is observed irrespective of graphene coverage, surface roughness, or Cu grain size. This result is interpreted to indicate attachment-limited growth and desorption of diffusing C-containing species. Graphene grown on Cu surfaces that were annealed in a non-reducing environment exhibits a qualitatively different scaling function, indicating diffusion-limited growth with a lower attachment barrier combined with C detachment from the graphene edges.

“It’s Like a Phantom Disease”: Patient Perspectives on Access to Treatment for Chagas Disease in the United States

PubMed Central

Forsyth, Colin J.; Hernandez, Salvador; Flores, Carmen A.; Roman, Mario F.; Nieto, J. Maribel; Marquez, Grecia; Sequeira, Juan; Sequeira, Harry; Meymandi, Sheba K.

2018-01-01

Abstract. Chagas disease (CD) affects > 6 million people globally, including > 300,000 in the United States. Although early detection and etiological treatment prevents chronic complications from CD, < 1% of U.S. cases have been diagnosed and treated. This study explores access to etiological treatment from the perspective of patients with CD. In semi-structured interviews with 50 Latin American–born patients of the Center of Excellence for Chagas Disease at the Olive View–UCLA Medical Center, we collected demographic information and asked patients about their experiences managing the disease and accessing treatment. Patients were highly marginalized, with 63.4% living below the U.S. poverty line, 60% lacking a high school education, and only 12% with private insurance coverage. The main barriers to accessing health care for CD were lack of providers, precarious insurance coverage, low provider awareness, transportation difficulties, and limited time off. Increasing access to diagnosis and treatment will not only require a dramatic increase in provider and public education, but also development of programs which are financially, linguistically, politically, and geographically accessible to patients. PMID:29380723

An evaluation of the suitability of ERTS data for the purposes of petroleum exploration

NASA Technical Reports Server (NTRS)

Collins, R. J., Jr. (Principal Investigator); Mccown, F. P.; Stonis, L. P.; Petzel, G.

1973-01-01

The author has identified the following significant results. ERTS-1 imagery seems to be good to excellent for reconnaissance level investigations of large sedimentary basins such as the Anadarko Basin. Many lithologic boundaries, and geomorphic features, and linear features inferred to be indicative of geologic structure are visible in the imagery. This imagery in conjunction with high altitude photography seems to be useful as a tool for intermediate level geologic exploration. Several types of crudely circular anomalous features, such as geomorphic/structural anomalies, hazy areas and tonal anomalies, are identifiable in the imagery. There seems to be a strong correlation between the geomorphic/structural and hazy anomalies and known structurally controlled oil and gas fields. The features recognizable on ERTS-1 imagery and their ease of recognition vary from area to area even in imagery acquired at the same time under essentially uniform atmospheric conditions. Repeated coverage is exceedingly valuable in geologic applications. One time complete coverage even for the various seasons does not reveal all the features that ERTS-1 can reveal.

Thermally evaporated methylammonium tin triiodide thin films for lead-free perovskite solar cell fabrication

DOE PAGES

Yu, Yue; Zhao, Dewei; Grice, Corey R.; ...

2016-09-16

Here, we report on the synthesis of methylammonium tin triiodide (MASnI 3) thin films at room temperature by a hybrid thermal evaporation method and their application in fabricating lead (Pb)-free perovskite solar cells. The as-deposited MASnI 3 thin films exhibit smooth surfaces, uniform coverage across the entire substrate, and strong crystallographic preferred orientation along the < 100 > direction. By incorporating this film with an inverted planar device architecture, our Pb-free perovskite solar cells are able to achieve an open-circuit voltage ( V oc) up to 494 mV. The relatively high V oc is mainly ascribed to the excellent surfacemore » coverage, the compact morphology, the good stoichiometry control of the MASnI 3 thin films, and the effective passivation of the electron-blocking and hole-blocking layers. Finally, our results demonstrate the potential capability of the hybrid evaporation method to prepare high-quality Pb-free MASnI 3 perovskite thin films which can be used to fabricate efficient Pb-free perovskite solar cells.« less

Expressing the human proteome for affinity proteomics: optimising expression of soluble protein domains and in vivo biotinylation

PubMed Central

Keates, Tracy; Cooper, Christopher D.O.; Savitsky, Pavel; Allerston, Charles K.; Phillips, Claire; Hammarström, Martin; Daga, Neha; Berridge, Georgina; Mahajan, Pravin; Burgess-Brown, Nicola A.; Müller, Susanne; Gräslund, Susanne; Gileadi, Opher

2012-01-01

The generation of affinity reagents to large numbers of human proteins depends on the ability to express the target proteins as high-quality antigens. The Structural Genomics Consortium (SGC) focuses on the production and structure determination of human proteins. In a 7-year period, the SGC has deposited crystal structures of >800 human protein domains, and has additionally expressed and purified a similar number of protein domains that have not yet been crystallised. The targets include a diversity of protein domains, with an attempt to provide high coverage of protein families. The family approach provides an excellent basis for characterising the selectivity of affinity reagents. We present a summary of the approaches used to generate purified human proteins or protein domains, a test case demonstrating the ability to rapidly generate new proteins, and an optimisation study on the modification of >70 proteins by biotinylation in vivo. These results provide a unique synergy between large-scale structural projects and the recent efforts to produce a wide coverage of affinity reagents to the human proteome. PMID:22027370

Repliscan: a tool for classifying replication timing regions.

PubMed

Zynda, Gregory J; Song, Jawon; Concia, Lorenzo; Wear, Emily E; Hanley-Bowdoin, Linda; Thompson, William F; Vaughn, Matthew W

2017-08-07

Replication timing experiments that use label incorporation and high throughput sequencing produce peaked data similar to ChIP-Seq experiments. However, the differences in experimental design, coverage density, and possible results make traditional ChIP-Seq analysis methods inappropriate for use with replication timing. To accurately detect and classify regions of replication across the genome, we present Repliscan. Repliscan robustly normalizes, automatically removes outlying and uninformative data points, and classifies Repli-seq signals into discrete combinations of replication signatures. The quality control steps and self-fitting methods make Repliscan generally applicable and more robust than previous methods that classify regions based on thresholds. Repliscan is simple and effective to use on organisms with different genome sizes. Even with analysis window sizes as small as 1 kilobase, reliable profiles can be generated with as little as 2.4x coverage.

Automatic Road Gap Detection Using Fuzzy Inference System

NASA Astrophysics Data System (ADS)

Hashemi, S.; Valadan Zoej, M. J.; Mokhtarzadeh, M.

2011-09-01

Automatic feature extraction from aerial and satellite images is a high-level data processing which is still one of the most important research topics of the field. In this area, most of the researches are focused on the early step of road detection, where road tracking methods, morphological analysis, dynamic programming and snakes, multi-scale and multi-resolution methods, stereoscopic and multi-temporal analysis, hyper spectral experiments, are some of the mature methods in this field. Although most researches are focused on detection algorithms, none of them can extract road network perfectly. On the other hand, post processing algorithms accentuated on the refining of road detection results, are not developed as well. In this article, the main is to design an intelligent method to detect and compensate road gaps remained on the early result of road detection algorithms. The proposed algorithm consists of five main steps as follow: 1) Short gap coverage: In this step, a multi-scale morphological is designed that covers short gaps in a hierarchical scheme. 2) Long gap detection: In this step, the long gaps, could not be covered in the previous stage, are detected using a fuzzy inference system. for this reason, a knowledge base consisting of some expert rules are designed which are fired on some gap candidates of the road detection results. 3) Long gap coverage: In this stage, detected long gaps are compensated by two strategies of linear and polynomials for this reason, shorter gaps are filled by line fitting while longer ones are compensated by polynomials.4) Accuracy assessment: In order to evaluate the obtained results, some accuracy assessment criteria are proposed. These criteria are obtained by comparing the obtained results with truly compensated ones produced by a human expert. The complete evaluation of the obtained results whit their technical discussions are the materials of the full paper.

A novel method to quantify and compare anatomical shape: application in cervix cancer radiotherapy

NASA Astrophysics Data System (ADS)

Oh, Seungjong; Jaffray, David; Cho, Young-Bin

2014-06-01

Adaptive radiation therapy (ART) had been proposed to restore dosimetric deficiencies during treatment delivery. In this paper, we developed a technique of Geometric reLocation for analyzing anatomical OBjects' Evolution (GLOBE) for a numerical model of tumor evolution under radiation therapy and characterized geometric changes of the target using GLOBE. A total of 174 clinical target volumes (CTVs) obtained from 32 cervical cancer patients were analyzed. GLOBE consists of three main steps; step (1) deforming a 3D surface object to a sphere by parametric active contour (PAC), step (2) sampling a deformed PAC on 642 nodes of icosahedron geodesic dome for reference frame, and step (3) unfolding 3D data to 2D plane for convenient visualization and analysis. The performance was evaluated with respect to (1) convergence of deformation (iteration number and computation time) and (2) accuracy of deformation (residual deformation). Based on deformation vectors from planning CTV to weekly CTVs, target specific (TS) margins were calculated on each sampled node of GLOBE and the systematic (Σ) and random (σ) variations of the vectors were calculated. Population based anisotropic (PBA) margins were generated using van Herk's margin recipe. GLOBE successfully modeled 152 CTVs from 28 patients. Fast convergence was observed for most cases (137/152) with the iteration number of 65 ± 74 (average ± STD) and the computation time of 13.7 ± 18.6 min. Residual deformation of PAC was 0.9 ± 0.7 mm and more than 97% was less than 3 mm. Margin analysis showed random nature of TS-margin. As a consequence, PBA-margins perform similarly to ISO-margins. For example, PBA-margins for 90% patients' coverage with 95% dose level is close to 13 mm ISO-margins in the aspect of target coverage and OAR sparing. GLOBE demonstrates a systematic analysis of tumor motion and deformation of patients with cervix cancer during radiation therapy and numerical modeling of PBA-margin on 642 locations of CTV surface.

Enantioselective Rhodium-Catalyzed Dimerization of ω-Allenyl Carboxylic Acids: Straightforward Synthesis of C2 -Symmetric Macrodiolides.

PubMed

Steib, Philip; Breit, Bernhard

2018-04-19

Herein, we report on the first enantioselective and atom-efficient catalytic one-step dimerization method to selectively transform ω-allenyl carboxylic acids into C 2 -symmetric 14- to 28-membered bismacrolactones (macrodiolides). This convenient asymmetric access serves as an attractive route towards multiple naturally occuring homodimeric macrocyclic scaffolds and demonstrates excellent efficiency to construct the complex, symmetric core structures. By utilizing a rhodium catalyst with a modified chiral cyclopentylidene-diop ligand, the desired diolides were obtained in good to high yields, high diastereoselectivity, and excellent enantioselectivity. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Highly efficient water-mediated approach to access benzazoles: metal catalyst and base-free synthesis of 2-substituted benzimidazoles, benzoxazoles, and benzothiazoles.

PubMed

Bala, Manju; Verma, Praveen Kumar; Sharma, Deepika; Kumar, Neeraj; Singh, Bikram

2015-05-01

An efficient water-catalyzed method has been developed for the synthesis of 2-substituted benzimidazoles, benzoxazoles, and benzothiazoles in one step. The present method excludes the usage of toxic metal catalysts and bases to produce benzazoles in good to excellent yields. An efficient and versatile water-mediated method has been established for the synthesis of various 2-arylbenzazoles. The present protocol excludes the usage of any catalyst and additive provided excellent selectivities and yields with high functional group tolerance for the synthesis of 2-arylated benzimidazoles, benzoxazoles, and benzothiazoles. Benzazolones were also synthesized using similar reaction protocol.

Photoluminescent carbon dots synthesized by microwave treatment for selective image of cancer cells.

PubMed

Yang, Xudong; Yang, Xue; Li, Zhenyu; Li, Shouying; Han, Yexuan; Chen, Yang; Bu, Xinyuan; Su, Chunyan; Xu, Hong; Jiang, Yingnan; Lin, Quan

2015-10-15

In this work, a simple, low-cost and one-step microwave approach has been demonstrated for the synthesis of water-soluble carbon dots (C-dots). The average size of the resulting C-dots is about 4 nm. From the photoluminescence (PL) measurements, the C-dots exhibit excellent biocompatibility and intense PL with the high quantum yield (QY) at Ca. 25%. Significantly, the C-dots have excellent biocompatibility and the capacity to specifically target the cells overexpressing the folate receptor (FR). These exciting results indicate the as-prepared C-dots are promising biocompatible probe for cancer diagnosis and treatment. Copyright © 2015 Elsevier Inc. All rights reserved.

SOFIA First Generation Science Instruments

NASA Technical Reports Server (NTRS)

Erickson, Edwin F.; Meyer, Allan W.

2003-01-01

SOFIA will provide 0.3- 1600 pm wavelength coverage, excellent FIR/submm angular resolution, a variety of focal plane instruments, and access to them throughout a 20-year lifetime. These attributes assure SOFIA a vital role in future observations of the interstellar medium, and in numerous other studies. SOFIA is a joint program of NASA in the U.S. and DLR in Germany. Observing time will be arranged by annual peer review of proposals, with roughly 80 percent of the time granted by the U.S. and 20 percent of the time granted by Germany. International proposals may be submitted to either time allocation committee. SOFIA is expected to begin science flights in 2005.

Rapid microscale in-gel processing and digestion of proteins using surface acoustic waves.

PubMed

Kulkarni, Ketav P; Ramarathinam, Sri H; Friend, James; Yeo, Leslie; Purcell, Anthony W; Perlmutter, Patrick

2010-06-21

A new method for in-gel sample processing and tryptic digestion of proteins is described. Sample preparation, rehydration, in situ digestion and peptide extraction from gel slices are dramatically accelerated by treating the gel slice with surface acoustic waves (SAWs). Only 30 minutes total workflow time is required for this new method to produce base peak chromatograms (BPCs) of similar coverage and intensity to those observed for traditional processing and overnight digestion. Simple set up, good reproducibility, excellent peptide recoveries, rapid turnover of samples and high confidence protein identifications put this technology at the fore-front of the next generation of proteomics sample processing tools.

Relating structure with morphology: A comparative study of perfect Langmuir Blodgett multilayers

NASA Astrophysics Data System (ADS)

Mukherjee, Smita; Datta, Alokmay; Giglia, Angelo; Mahne, Nichole; Nannarone, Stefano

2008-01-01

Atomic force microscopy and X-ray reflectivity of metal-stearate (MSt) Langmuir-Blodgett films on hydrophilic Silicon (1 0 0), show dramatic reduction in 'pinhole' defects when metal M is changed from Cd to Co, along with excellent periodicity in multilayer, with hydrocarbon tails tilted 9.6° from vertical for CoSt (untilted for CdSt). Near edge X-ray absorption fine structure (NEXAFS) and Fourier transform infra-red (FTIR) spectroscopies indicate bidentate bridging metal-carboxylate coordination in CoSt (unidentate in CdSt), underscoring role of headgroup structure in determining morphology. FTIR studies also show increased packing density in CoSt, consistent with increased coverage.

Targeted Next-generation Sequencing and Bioinformatics Pipeline to Evaluate Genetic Determinants of Constitutional Disease.

PubMed

Dilliott, Allison A; Farhan, Sali M K; Ghani, Mahdi; Sato, Christine; Liang, Eric; Zhang, Ming; McIntyre, Adam D; Cao, Henian; Racacho, Lemuel; Robinson, John F; Strong, Michael J; Masellis, Mario; Bulman, Dennis E; Rogaeva, Ekaterina; Lang, Anthony; Tartaglia, Carmela; Finger, Elizabeth; Zinman, Lorne; Turnbull, John; Freedman, Morris; Swartz, Rick; Black, Sandra E; Hegele, Robert A

2018-04-04

Next-generation sequencing (NGS) is quickly revolutionizing how research into the genetic determinants of constitutional disease is performed. The technique is highly efficient with millions of sequencing reads being produced in a short time span and at relatively low cost. Specifically, targeted NGS is able to focus investigations to genomic regions of particular interest based on the disease of study. Not only does this further reduce costs and increase the speed of the process, but it lessens the computational burden that often accompanies NGS. Although targeted NGS is restricted to certain regions of the genome, preventing identification of potential novel loci of interest, it can be an excellent technique when faced with a phenotypically and genetically heterogeneous disease, for which there are previously known genetic associations. Because of the complex nature of the sequencing technique, it is important to closely adhere to protocols and methodologies in order to achieve sequencing reads of high coverage and quality. Further, once sequencing reads are obtained, a sophisticated bioinformatics workflow is utilized to accurately map reads to a reference genome, to call variants, and to ensure the variants pass quality metrics. Variants must also be annotated and curated based on their clinical significance, which can be standardized by applying the American College of Medical Genetics and Genomics Pathogenicity Guidelines. The methods presented herein will display the steps involved in generating and analyzing NGS data from a targeted sequencing panel, using the ONDRISeq neurodegenerative disease panel as a model, to identify variants that may be of clinical significance.

Continuum elastic theory for dynamics of surfaces and interfaces

NASA Astrophysics Data System (ADS)

Pykhtin, Michael V.

This thesis is divided into three parts, different by problems they deal with, but similar by underlying assumptions (crystals are treated as classical elastic anisotropic media) and methods of solving (vibrational Green's functions). (i) In the first part we compute the density of vibrational modes for a vicinal Ni(977) surface. In the spectrum we find new step induced modes which are compared with recently reported experimental data for Ni(977) surface obtained by inelastic atom scattering. (ii) In the second part we study damping of low-frequency adsorbate vibrations via resonant coupling to the substrate phonons. Our theory provides a general expression for the vibrational damping rate which can be applied to widely varying coverages and arbitrary overlayer structures. The damping rates predicted by our theory for CO on Cu(100) are in excellent quantitative agreement with available experimental data. (iii) In the third part we develop a theory for the density of vibrational modes at the surface of a thin film of one anisotropic solid an on top of the other. We compute the density of modes for a GaN film on a sapphire substrate for a wide range of wavevector and frequency, and obtain dispersion maps which contain waves trapped between the surface of the film and the interface. Two families of the trapped modes were observed: Love waves and generalized Lamb waves. We also study the effect of threading edge dislocations (majority of defects in the GaN film) on the trapped modes. At the experimental dislocation density the effect is negligible.

Findings from a hepatitis B birth dose assessment in health facilities in the Philippines: opportunities to engage the private sector.

PubMed

Patel, Minal K; Capeding, Rosario Z; Ducusin, Joyce U; de Quiroz Castro, Maricel; Garcia, Luzviminda C; Hennessey, Karen

2014-09-03

Hepatitis B vaccination in the Philippines was introduced in 1992 to reduce the high burden of chronic hepatitis B virus (HBV) infection in the population; in 2007, a birth dose (HepB-BD) was introduced to decrease perinatal HBV transmission. Timely HepB-BD coverage, defined as doses given within 24h of birth, was 40% nationally in 2011. A first step in improving timely HepB-BD coverage is to ensure that all newborns born in health facilities are vaccinated. In order to assess ways of improving the Philippines' HepB-BD program, we evaluated knowledge, attitudes, and practices surrounding HepB-BD administration in health facilities. Teams visited selected government clinics, government hospitals, and private hospitals in regions with low reported HepB-BD coverage and interviewed immunization and maternity staff. HepB-BD coverage was calculated in each facility for a 3-month period in 2011. Of the 142 health facilities visited, 12 (8%) did not provide HepB-BD; seven were private hospitals and five were government hospitals. Median timely HepB-BD coverage was 90% (IQR 80%-100%) among government clinics, 87% (IQR 50%-97%) among government hospitals, and 50% (IQR 0%-90%) among private hospitals (p=0.02). The private hospitals were least likely to receive supervision (53% vs. 6%-31%, p=0.0005) and to report vaccination data to the national Expanded Programme on Immunization (36% vs. 96%-100%, p<0.0001). Private sector hospitals in the Philippines, which deliver 18% of newborns, had the lowest timely HepB-BD coverage. Multiple avenues exist to engage the private sector in hepatitis B prevention including through existing laws, newborn health initiatives, hospital accreditation processes, and raising awareness of the government's free vaccine program. Copyright © 2013 World Health Organization (WHO). Published by Elsevier Ltd.. All rights reserved.

Numeric calculation of celestial bodies with spreadsheet analysis

NASA Astrophysics Data System (ADS)

Koch, Alexander

2016-04-01

The motion of the planets and moons in our solar system can easily be calculated for any time by the Kepler laws of planetary motion. The Kepler laws are a special case of the gravitational law of Newton, especially if you consider more than two celestial bodies. Therefore it is more basic to calculate the motion by using the gravitational law. But the problem is, that by gravitational law it is not possible to calculate the state of motion with only one step of calculation. The motion has to be numerical calculated for many time intervalls. For this reason, spreadsheet analysis is helpful for students. Skills in programmes like Excel, Calc or Gnumeric are important in professional life and can easily be learnt by students. These programmes can help to calculate the complex motions with many intervalls. The more intervalls are used, the more exact are the calculated orbits. The sutdents will first get a quick course in Excel. After that they calculate with instructions the 2-D-coordinates of the orbits of Moon and Mars. Step by step the students are coding the formulae for calculating physical parameters like coordinates, force, acceleration and velocity. The project is limited to 4 weeks or 8 lessons. So the calcualtion will only include the calculation of one body around the central mass like Earth or Sun. The three-body problem can only be shortly discussed at the end of the project.

Quantitative Gait Measurement With Pulse-Doppler Radar for Passive In-Home Gait Assessment

PubMed Central

Skubic, Marjorie; Rantz, Marilyn; Cuddihy, Paul E.

2014-01-01

In this paper, we propose a pulse-Doppler radar system for in-home gait assessment of older adults. A methodology has been developed to extract gait parameters including walking speed and step time using Doppler radar. The gait parameters have been validated with a Vicon motion capture system in the lab with 13 participants and 158 test runs. The study revealed that for an optimal step recognition and walking speed estimation, a dual radar set up with one radar placed at foot level and the other at torso level is necessary. An excellent absolute agreement with intraclass correlation coefficients of 0.97 was found for step time estimation with the foot level radar. For walking speed, although both radars show excellent consistency they all have a system offset compared to the ground truth due to walking direction with respect to the radar beam. The torso level radar has a better performance (9% offset on average) in the speed estimation compared to the foot level radar (13%–18% offset). Quantitative analysis has been performed to compute the angles causing the systematic error. These lab results demonstrate the capability of the system to be used as a daily gait assessment tool in home environments, useful for fall risk assessment and other health care applications. The system is currently being tested in an unstructured home environment. PMID:24771566

Quantitative gait measurement with pulse-Doppler radar for passive in-home gait assessment.

PubMed

Wang, Fang; Skubic, Marjorie; Rantz, Marilyn; Cuddihy, Paul E

2014-09-01

In this paper, we propose a pulse-Doppler radar system for in-home gait assessment of older adults. A methodology has been developed to extract gait parameters including walking speed and step time using Doppler radar. The gait parameters have been validated with a Vicon motion capture system in the lab with 13 participants and 158 test runs. The study revealed that for an optimal step recognition and walking speed estimation, a dual radar set up with one radar placed at foot level and the other at torso level is necessary. An excellent absolute agreement with intraclass correlation coefficients of 0.97 was found for step time estimation with the foot level radar. For walking speed, although both radars show excellent consistency they all have a system offset compared to the ground truth due to walking direction with respect to the radar beam. The torso level radar has a better performance (9% offset on average) in the speed estimation compared to the foot level radar (13%-18% offset). Quantitative analysis has been performed to compute the angles causing the systematic error. These lab results demonstrate the capability of the system to be used as a daily gait assessment tool in home environments, useful for fall risk assessment and other health care applications. The system is currently being tested in an unstructured home environment.

A novel approach for blood purification: mixed-matrix membranes combining diffusion and adsorption in one step.

PubMed

Tijink, Marlon S L; Wester, Maarten; Sun, Junfen; Saris, Anno; Bolhuis-Versteeg, Lydia A M; Saiful, Saiful; Joles, Jaap A; Borneman, Zandrie; Wessling, Matthias; Stamatialis, Dimitris F

2012-07-01

Hemodialysis is a commonly used blood purification technique in patients requiring kidney replacement therapy. Sorbents could increase uremic retention solute removal efficiency but, because of poor biocompatibility, their use is often limited to the treatment of patients with acute poisoning. This paper proposes a novel membrane concept for combining diffusion and adsorption of uremic retention solutes in one step: the so-called mixed-matrix membrane (MMM). In this concept, adsorptive particles are incorporated in a macro-porous membrane layer whereas an extra particle-free membrane layer is introduced on the blood-contacting side of the membrane to improve hemocompatibility and prevent particle release. These dual-layer mixed-matrix membranes have high clean-water permeance and high creatinine adsorption from creatinine model solutions. In human plasma, the removal of creatinine and of the protein-bound solute para-aminohippuric acid (PAH) by single and dual-layer membranes is in agreement with the removal achieved by the activated carbon particles alone, showing that under these experimental conditions the accessibility of the particles in the MMM is excellent. This study proves that the combination of diffusion and adsorption in a single step is possible and paves the way for the development of more efficient blood purification devices, excellently combining the advantages of both techniques. Copyright © 2012 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Congratulating the Northwestern University Wildcats on winning the 2009 NCAA women's lacrosse championship, and to commend Northwestern University for its pursuit of athletic and academic excellence.

THOMAS, 111th Congress

Rep. Schakowsky, Janice D. [D-IL-9

2009-10-13

House - 11/16/2009 Referred to the Subcommittee on Higher Education, Lifelong Learning, and Competitiveness. (All Actions) Tracker: This bill has the status Agreed to in HouseHere are the steps for Status of Legislation:

Direct amination of γ-halo-β-ketoesters with anilines

PubMed Central

Zhang, Yinan; Silverman, Richard B.

2012-01-01

The direct amination of α-haloacetoacetates with anilines is described. Compared to existing methods, this simple protocol provides an attractive strategy to prepare diverse γ-anilino-β-ketoesters in one step. Good to excellent yields of the amination products were obtained under robust conditions, providing versatile and useful scaffolds. PMID:22390154

Development of Active Learning with Simulations and Games

ERIC Educational Resources Information Center

Zapalska, Alina; Brozik, Dallas; Rudd, Denis

2012-01-01

Educational games and simulations are excellent active learning tools that offer students hands-on experience. Little research is available on developing games and simulations and how teachers can be assisted in making their own games and simulations. In this context, the paper presents a multi-step process of how to develop games and simulations…

Functionalized graphene hydrogel-based high-performance supercapacitors.

PubMed

Xu, Yuxi; Lin, Zhaoyang; Huang, Xiaoqing; Wang, Yang; Huang, Yu; Duan, Xiangfeng

2013-10-25

Functionalized graphene hydrogels are prepared by a one-step low-temperature reduction process and exhibit ultrahigh specific capacitances and excellent cycling stability in the aqueous electrolyte. Flexible solid-state supercapacitors based on functionalized graphene hydrogels are demonstrated with superior capacitive performances and extraordinary mechanical flexibility. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Now for the Hard Stuff: Next Steps in ECB Research and Practice

ERIC Educational Resources Information Center

Preskill, Hallie

2014-01-01

Though several excellent literature reviews and research syntheses have been conducted, and thoughtful frameworks and models have been proposed, I believe it is time for the evaluation field to tackle the "hard stuff" of evaluation capacity building (ECB). This entails engaging staff in ECB activities, building the evaluation capacity of…

Benchmarking in Education: Tech Prep, a Case in Point. IEE Brief Number 8.

ERIC Educational Resources Information Center

Inger, Morton

Benchmarking is a process by which organizations compare their practices, processes, and outcomes to standards of excellence in a systematic way. The benchmarking process entails the following essential steps: determining what to benchmark and establishing internal baseline data; identifying the benchmark; determining how that standard has been…

Longleaf Pine Seed Quality and Preparation For Sowing

Treesearch

Robert P. Karrfalt

2002-01-01

The ability to run a highly efficient container nursery is heavily dependent on having excellent seed quality. Longleaf (Pines palustris Mill.) seed quality, although frequently poor, can just as easily be high if care is taken to meet the biological requirements of this species at all steps from seed collection through preparation of seeds for...

Recognizing the achievements of the Nation's high school graduating class of 2010, promoting the importance of encouraging intellectual growth, and rewarding academic excellence of all United States high school students.

THOMAS, 111th Congress

Rep. Meeks, Gregory W. [D-NY-6

2010-06-15

House - 09/13/2010 Referred to the Subcommittee on Early Childhood, Elementary, and Secondary Education. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

The Process of Systemic Change

ERIC Educational Resources Information Center

Duffy, Francis M.; Reigeluth, Charles M.; Solomon, Monica; Caine, Geoffrey; Carr-Chellman, Alison A.; Almeida, Luis; Frick, Theodore; Thompson, Kenneth; Koh, Joyce; Ryan, Christopher D.; DeMars, Shane

2006-01-01

This paper presents several brief papers about the process of systemic change. These are: (1) Step-Up-To-Excellence: A Protocol for Navigating Whole-System Change in School Districts by Francis M. Duffy; (2) The Guidance System for Transforming Education by Charles M. Reigeluth; (3) The Schlechty Center For Leadership In School Reform by Monica…

To amend title 5, United States Code, to make clear that family coverage under the Federal Employees Health Benefits Program remains available with respect to an otherwise eligible child of a Federal employee or annuitant until that child attains 26 years of age, and for other purposes.

THOMAS, 111th Congress

Rep. Dahlkemper, Kathleen A. [D-PA-3

2010-04-29

House - 07/20/2010 Referred to the Subcommittee on Federal Workforce, Post Office, and the District of Columbia. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

One-step facile hydrothermal synthesis of Fe2O3@LiCoO2 composite as excellent supercapacitor electrode materials

NASA Astrophysics Data System (ADS)

Gopi, Chandu V. V. Muralee; Somasekha, A.; Reddy, Araveeti Eswar; Kim, Soo-Kyoung; Kim, Hee-Je

2018-03-01

Herein, for the first time, we demonstrate the fabrication of Fe2O3@LiCoO2 hybrid nanostructures on Ni foam substrate by facile one-step hydrothermal technique. Morphological studies reveal that aggregated Fe2O3 nanoflakes anchored on the surface of sphere-like LiCoO2 nanoflakes. Electrochemical studies are used to examine the performance of the supercapacitor electrodes. The composite Fe2O3@LiCoO2 electrode exhibited excellent electrochemical performance than Fe2O3 and LiCoO2 electrodes, such as a low charge transfer resistance, a high specific capacitance of 489 F g-1 at 5 mA cm-2 and an enhanced capacity retention of 108% over 3000 cycles at 15 mA cm-2. The composite Fe2O3@LiCoO2 holds great promise for electrochemical applications due to well-defined hierarchical morphology, synergetic effect of Fe2O3 and LiCoO2, enhanced electrical conductivity, efficient electrolyte penetration and fast electron transfer.

Photopolymer Electrolytes for Sustainable, Upscalable, Safe, and Ambient-Temperature Sodium-Ion Secondary Batteries.

PubMed

Bella, Federico; Colò, Francesca; Nair, Jijeesh R; Gerbaldi, Claudio

2015-11-01

The first example of a photopolymerized electrolyte for a sodium-ion battery is proposed herein. By means of a preparation process free of solvents, catalysts, purification steps, and separation steps, it is possible to obtain a three-dimensional polymeric network capable of efficient sodium-ion transport. The thermal properties of the resulting solid electrolyte separator, characterized by means of thermogravimetric and calorimetric techniques, are excellent for use in sustainable energy systems conceived for safe large-scale grid storage. The photopolymerized electrolyte shows a wide electrochemical stability window up to 4.8 V versus Na/Na(+) along with the highest ionic conductivity (5.1 mS cm(-1) at 20 °C) obtained in the field of Na-ion polymer batteries so far and stable long-term constant-current charge/discharge cycling. Moreover, the polymeric networks are also demonstrated for the in situ fabrication of electrode/electrolyte composites with excellent interfacial properties, which are ideal for all-solid-state, safe, and easily upscalable device assembly. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mechanism and scope of the cyanide-catalyzed cross silyl benzoin reaction.

PubMed

Linghu, Xin; Bausch, Cory C; Johnson, Jeffrey S

2005-02-16

In this work, cross silyl benzoin addition reactions between acylsilanes (1) and aldehydes (2) catalyzed by metal cyanides are described. Unsymmetrical aryl-, heteroaryl-, and alkyl-substituted benzoin adducts can be generated in moderate to excellent yields with complete regiocontrol using potassium cyanide and a phase transfer catalyst. From a screen of transition metal cyanide complexes, lanthanum tricyanide was identified as an improved second-generation catalyst for the cross silyl benzoin reaction. A study of the influence of water on the KCN-catalyzed cross silyl benzoin addition revealed more practical reaction conditions using unpurified solvent under ambient conditions. A sequential silyl benzoin addition/cyanation/O-acylation reaction that resulted in two new C-C bonds was achieved in excellent yield. The mechanism of cross silyl benzoin addition is proposed in detail and is supported by crossover studies and a number of unambiguous experiments designed to ascertain the reversibility of key steps. No productive chemistry arises from cyanation of the more electrophilic aldehyde component. Formation of the carbon-carbon bond is shown to be the last irreversible step in the reaction.

Count every newborn; a measurement improvement roadmap for coverage data

PubMed Central

2015-01-01

Background The Every Newborn Action Plan (ENAP), launched in 2014, aims to end preventable newborn deaths and stillbirths, with national targets of ≤12 neonatal deaths per 1000 live births and ≤12 stillbirths per 1000 total births by 2030. This requires ambitious improvement of the data on care at birth and of small and sick newborns, particularly to track coverage, quality and equity. Methods In a multistage process, a matrix of 70 indicators were assessed by the Every Newborn steering group. Indicators were graded based on their availability and importance to ENAP, resulting in 10 core and 10 additional indicators. A consultation process was undertaken to assess the status of each ENAP core indicator definition, data availability and measurement feasibility. Coverage indicators for the specific ENAP treatment interventions were assigned task teams and given priority as they were identified as requiring the most technical work. Consultations were held throughout. Results ENAP published 10 core indicators plus 10 additional indicators. Three core impact indicators (neonatal mortality rate, maternal mortality ratio, stillbirth rate) are well defined, with future efforts needed to focus on improving data quantity and quality. Three core indicators on coverage of care for all mothers and newborns (intrapartum/skilled birth attendance, early postnatal care, essential newborn care) have defined contact points, but gaps exist in measuring content and quality of the interventions. Four core (antenatal corticosteroids, neonatal resuscitation, treatment of serious neonatal infections, kangaroo mother care) and one additional coverage indicator for newborns at risk or with complications (chlorhexidine cord cleansing) lack indicator definitions or data, especially for denominators (population in need). To address these gaps, feasible coverage indicator definitions are presented for validity testing. Measurable process indicators to help monitor health service readiness are also presented. A major measurement gap exists to monitor care of small and sick babies, yet signal functions could be tracked similarly to emergency obstetric care. Conclusions The ENAP Measurement Improvement Roadmap (2015-2020) outlines tools to be developed (e.g., improved birth and death registration, audit, and minimum perinatal dataset) and actions to test, validate and institutionalise proposed coverage indicators. The roadmap presents a unique opportunity to strengthen routine health information systems, crosslinking these data with civil registration and vital statistics and population-based surveys. Real measurement change requires intentional transfer of leadership to countries with the greatest disease burden and will be achieved by working with centres of excellence and existing networks. PMID:26391444

Multicriteria decision analysis for including health interventions in the universal health coverage benefit package in Thailand.

PubMed

Youngkong, Sitaporn; Baltussen, Rob; Tantivess, Sripen; Mohara, Adun; Teerawattananon, Yot

2012-01-01

Considering rising health expenditure on the one hand and increasing public expectations on the other hand, there is a need for explicit health care rationing to secure public acceptance of coverage decisions of health interventions. The National Health Security Office, the institute managing the Universal Coverage Scheme in Thailand, recently called for more rational, transparent, and fair decisions on the public reimbursement of health interventions. This article describes the application of multicriteria decision analysis (MCDA) to guide the coverage decisions on including health interventions in the Universal Coverage Scheme health benefit package in the period 2009-2010. We described the MCDA priority-setting process through participatory observation and evaluated the rational, transparency, and fairness of the priority-setting process against the accountability for reasonableness framework. The MCDA was applied in four steps: 1) 17 interventions were nominated for assessment; 2) nine interventions were selected for further quantitative assessment on the basis of the following criteria: size of population affected by disease, severity of disease, effectiveness of health intervention, variation in practice, economic impact on household expenditure, and equity and social implications; 3) these interventions were then assessed in terms of cost-effectiveness and budget impact; and 4) decision makers qualitatively appraised, deliberated, and reached consensus on which interventions should be adopted in the package. This project was carried out in a real-world context and has considerably contributed to the rational, transparent, and fair priority-setting process through the application of MCDA. Although the present project has applied MCDA in the Thai context, MCDA is adaptable to other settings. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Robustness of Representative Signals Relative to Data Loss Using Atlas-Based Parcellations.

PubMed

Gajdoš, Martin; Výtvarová, Eva; Fousek, Jan; Lamoš, Martin; Mikl, Michal

2018-04-24

Parcellation-based approaches are an important part of functional magnetic resonance imaging data analysis. They are a necessary processing step for sorting data in structurally or functionally homogenous regions. Real functional magnetic resonance imaging datasets usually do not cover the atlas template completely; they are often spatially constrained due to the physical limitations of MR sequence settings, the inter-individual variability in brain shape, etc. When using a parcellation template, many regions are not completely covered by actual data. This paper addresses the issue of the area coverage required in real data in order to reliably estimate the representative signal and the influence of this kind of data loss on network analysis metrics. We demonstrate this issue on four datasets using four different widely used parcellation templates. We used two erosion approaches to simulate data loss on the whole-brain level and the ROI-specific level. Our results show that changes in ROI coverage have a systematic influence on network measures. Based on the results of our analysis, we recommend controlling the ROI coverage and retaining at least 60% of the area in order to ensure at least 80% of explained variance of the original signal.

Tuning surface grafting density of CeO2 nanocrystals with near- and supercritical solvent characteristics.

PubMed

Giroire, B; Slostowski, C; Marre, S; Aymonier, C; Aida, T; Hojo, D; Aoki, N; Takami, S; Adschiri, T

2016-01-21

In this work, the solvent effect on the synthesis of CeO2 nanocrystals synthesized in near- and supercritical alcohols is discussed. The materials prepared displayed a unique morphology of small nanocrystals (<10 nm) aggregated into larger nanospheres (∼100-200 nm). In such syntheses, alcohol molecules directly interact with the nanocrystal surface through alkoxide and carboxylate bondings. The grafting density was quantified from the weight loss measured using thermogravimetric analysis. A direct correlation between the grafting density and the alcohol chain length can be established. It was demonstrated that the shorter the alcohol chain length (i.e. methanol), the higher the surface coverage is. This trend is independent of the synthesis mode (batch or continuous). Additionally, an influence of the grafting density on the resulting nanocrystal size was established. It is suggested that the surface coverage has a high influence on the early stages of the nucleation and growth. Indeed, when high surface coverages are reached, all surface active sites are blocked, limiting the growth step and therefore leading to smaller particles. This effect was noticed with the materials prepared in the continuous mode where shorter reaction time was performed.

Improved perovskite phototransistor prepared using multi-step annealing method

NASA Astrophysics Data System (ADS)

Cao, Mingxuan; Zhang, Yating; Yu, Yu; Yao, Jianquan

2018-02-01

Organic-inorganic hybrid perovskites with good intrinsic physical properties have received substantial interest for solar cell and optoelectronic applications. However, perovskite film always suffers from a low carrier mobility due to its structural imperfection including sharp grain boundaries and pinholes, restricting their device performance and application potential. Here we demonstrate a straightforward strategy based on multi-step annealing process to improve the performance of perovskite photodetector. Annealing temperature and duration greatly affects the surface morphology and optoelectrical properties of perovskites which determines the device property of phototransistor. The perovskite films treated with multi-step annealing method tend to form highly uniform, well-crystallized and high surface coverage perovskite film, which exhibit stronger ultraviolet-visible absorption and photoluminescence spectrum compare to the perovskites prepared by conventional one-step annealing process. The field-effect mobilities of perovskite photodetector treated by one-step direct annealing method shows mobility as 0.121 (0.062) cm2V-1s-1 for holes (electrons), which increases to 1.01 (0.54) cm2V-1s-1 for that treated with muti-step slow annealing method. Moreover, the perovskite phototransistors exhibit a fast photoresponse speed of 78 μs. In general, this work focuses on the influence of annealing methods on perovskite phototransistor, instead of obtains best parameters of it. These findings prove that Multi-step annealing methods is feasible to prepared high performance based photodetector.

[The problems of pharmaceutical support of patients with diabetes mellitus type II].

PubMed

Khabriev, R U; Malichenko, V S; Malichenko, S B

2016-01-01

The diabetes mellitus acquires a character of sheer spreading global epidemic. Nowadays, in the Russian Federation number of patients with diabetes mellitus reaches 10 million. The accessibility of pharmaceuticals is one of main elements of support of effective treatment of disease. The analysis of federal and regional normative legal acts, territorial programs of state guarantees and data of portal of state purchases demonstrated inefficiency of actual regional system of medicinal support especially in modern economic situation. The necessity of optimization of state costs and also broadening of medicinal coverage of population, including pharmaceuticals for treatment of diabetes mellitus type II, requires development and implementation of step-by-step plan of reforming of regional system of preferential medicinal support.

Poster - 34: Clinical Implementation of Prone Breast Treatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Runqing; Fleming, Katrina; Kobeleva, Sofya

2016-08-15

Purpose: Prone breast treatment is used to reduce acute and late toxicities for large or pendulous breast patients. This study developed and implemented the clinical workflow of prone breast radiotherapy treatment. Methods: Varian kVue Access360™ Prone Breast Couchtop was used as prone breast board. The treatment planning (TP)is performed in Eclipse TP system. TP comparisons between supine deep inspiration breathing hold (DIBH) and prone breast; prone forward field-in-field (FinF) planning and inverse IMRT planning were performed and discussed. For the daily setup, breast coverage was assessed in the room using light field and MV imaging was used at day 1more » and weekly. Results: The first ten patients are CT scanned and planned both supine and prone. The coverage was all excellent for supine DIBH plan and prone breast plan. The plan in the prone position demonstrated improvements in lung sparing comparing to the DIBH plan. Both forward FinF plan and inverse IMRT plan achieved acceptable coverage of the breast, and heart dose is comparable. Considering the daily setup variations and MLC leakage, forward FinF plan was recommended for routine clinical use. The procedure has been tested in phantom and patients were treated clinically. Conclusions: Prone breast irradiation has been advocated for women with large pendulous breasts in order to decrease acute and late toxicities. The workflow for prone breast radiation therapy has been developed and the technique is ready to treat patients.« less

A situation analysis of public health interventions, barriers, and opportunities for improving maternal nutrition in Bihar, India.

PubMed

Noznesky, Elizabeth A; Ramakrishnan, Usha; Martorell, Reynaldo

2012-06-01

Maternal underweight and anemia are highly prevalent in Bihar, especially among adolescent girls aged 15 to 19 years. Although numerous programs and platforms exist for delivering efficacious interventions for improving maternal nutrition, the coverage and quality of these interventions are low. To examine existing interventions for reducing maternal undernutrition in Bihar and identify barriers to and opportunities for expanding their coverage and quality. The research was conducted in New Delhi and Bihar between May and August 2010. Forty-eight key informant interviews were conducted with policy makers, program managers, and service providers at multiple levels. Secondary data were collected from survey reports and program documents. All data were analyzed thematically. Barriers to the delivery and uptake of interventions to improve maternal nutrition include the shortage of essential inputs, low prioritization of maternal undernutrition, sterilization bias within the family planning program, weak management systems, poverty, gender inequality, caste discrimination, and flooding. In order to overcome barriers and improve service delivery, the current government and its partners have introduced structural reforms within the public health system, launched new programs for underserved groups, developed innovative approaches, and experimented with new technologies. Since coming to power, the Government of Bihar has achieved impressive increases in the coverage of prioritized health services, such as institutional deliveries and immunization. This success presents it with an excellent opportunity to further reduce maternal and infant mortality by turning its attention to the serious problem of maternal undernutrition and low birthweight.

Universal health coverage in Rwanda: dream or reality.

PubMed

Nyandekwe, Médard; Nzayirambaho, Manassé; Baptiste Kakoma, Jean

2014-01-01

Universal Health Coverage (UHC) has been a global concern for a long time and even more nowadays. While a number of publications are almost unanimous that Rwanda is not far from UHC, very few have focused on its financial sustainability and on its extreme external financial dependency. The objectives of this study are: (i) To assess Rwanda UHC based mainly on Community-Based Health Insurance (CBHI) from 2000 to 2012; (ii) to inform policy makers about observed gaps for a better way forward. A retrospective (2000-2012) SWOT analysis was applied to six metrics as key indicators of UHC achievement related to WHO definition, i.e. (i) health insurance and access to care, (ii) equity, (iii) package of services, (iv) rights-based approach, (v) quality of health care, (vi) financial-risk protection, and (vii) CBHI self-financing capacity (SFC) was added by the authors. The first metric with 96,15% of overall health insurance coverage and 1.07 visit per capita per year versus 1 visit recommended by WHO, the second with 24,8% indigent people subsidized versus 24,1% living in extreme poverty, the third, the fourth, and the fifth metrics excellently performing, the sixth with 10.80% versus ≤40% as limit acceptable of catastrophic health spending level and lastly the CBHI SFC i.e. proper cost recovery estimated at 82.55% in 2011/2012, Rwanda UHC achievements are objectively convincing. Rwanda UHC is not a dream but a reality if we consider all convincing results issued of the seven metrics.

Cuticular permeance in relation to wax and cutin development along the growing barley (Hordeum vulgare) leaf.

PubMed

Richardson, Andrew; Wojciechowski, Tobias; Franke, Rochus; Schreiber, Lukas; Kerstiens, Gerhard; Jarvis, Mike; Fricke, Wieland

2007-05-01

The developing leaf three of barley provides an excellent model system for the direct determination of relationships between amounts of waxes and cutin and cuticular permeance. Permeance of the cuticle was assessed via the time-course of uptake of either toluidine blue or (14)C-labelled benzoic acid ([(14)C] BA) along the length of the developing leaf. Toluidine blue uptake only occurred within the region 0-25 mm from the point of leaf insertion (POLI). Resistance--the inverse of permeance--to uptake of [(14)C] BA was determined for four leaf regions and was lowest in the region 10-20 mm above POLI. At 20-30 and 50-60 mm above POLI, it increased by factors of 6 and a further 32, respectively. Above the point of emergence of leaf three from the sheath of leaf two, which was 76-80 mm above POLI, resistance was as high as at 50-60 mm above POLI. GC-FID/MS analyses of wax and cutin showed that: (1) the initial seven fold increase in cuticular resistance coincided with increase in cutin coverage and appearance of waxes; (2) the second, larger and final increase in cuticle resistance was accompanied by an increase in wax coverage, whereas cutin coverage remained unchanged; (3) cutin deposition in barley leaf epidermis occurred in parallel with cell elongation, whereas deposition of significant amounts of wax commenced as cells ceased to elongate.

Modelling expertise at different levels of granularity using semantic similarity measures in the context of collaborative knowledge-curation platforms.

PubMed

Ziaimatin, Hasti; Groza, Tudor; Tudorache, Tania; Hunter, Jane

2016-12-01

Collaboration platforms provide a dynamic environment where the content is subject to ongoing evolution through expert contributions. The knowledge embedded in such platforms is not static as it evolves through incremental refinements - or micro-contributions. Such refinements provide vast resources of tacit knowledge and experience. In our previous work, we proposed and evaluated a Semantic and Time-dependent Expertise Profiling (STEP) approach for capturing expertise from micro-contributions. In this paper we extend our investigation to structured micro-contributions that emerge from an ontology engineering environment, such as the one built for developing the International Classification of Diseases (ICD) revision 11. We take advantage of the semantically related nature of these structured micro-contributions to showcase two major aspects: (i) a novel semantic similarity metric, in addition to an approach for creating bottom-up baseline expertise profiles using expertise centroids; and (ii) the application of STEP in this new environment combined with the use of the same semantic similarity measure to both compare STEP against baseline profiles, as well as to investigate the coverage of these baseline profiles by STEP.

Stepwise sequential redox potential modulation possible on a single platform.

PubMed

Pepiol, Ariadna; Teixidor, Francesc; Sillanpää, Reijo; Lupu, Marius; Viñas, Clara

2011-12-23

Step by step: The cluster [3,3'-Co(1,2-C(2)B(9)H(11))(2)](-) is an excellent platform for making a stepwise tunable redox potential system by dehydroiodination. With the addition of up to eight iodine substituents (purple; see picture), there is a fall in the E(1/2)(Co(III)/Co(II)) value from -1.80 V to -0.68 V (vs. Fc(+)/Fc; Fc = ferrocene). A practical application of this tunability has been observed in the growth of polypyrrole. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

One-Step Hydrothermal-Electrochemical Route to Carbon-Stabilized Anatase Powders

NASA Astrophysics Data System (ADS)

Tao, Ying; Yi, Danqing; Zhu, Baojun

2013-04-01

Black carbon-stabilized anatase particles were prepared by a simple one-step hydrothermal-electrochemical method using glucose and titanium citrate as the carbon and titanium source, respectively. Morphological, chemical, structural, and electrochemical characterizations of these powders were carried out by Raman spectroscopy, Fourier-transform infrared spectroscopy, x-ray diffraction, scanning electron microscopy, and cyclic voltammetry. It was revealed that 200-nm carbon/anatase TiO2 was homogeneously dispersed, and the powders exhibited excellent cyclic performance at high current rates of 0.05 V/s. The powders are interesting potential materials that could be used as anodes for lithium-ion batteries.

Accelerated simulations of aromatic polymers: application to polyether ether ketone (PEEK)

NASA Astrophysics Data System (ADS)

Broadbent, Richard J.; Spencer, James S.; Mostofi, Arash A.; Sutton, Adrian P.

2014-10-01

For aromatic polymers, the out-of-plane oscillations of aromatic groups limit the maximum accessible time step in a molecular dynamics simulation. We present a systematic approach to removing such high-frequency oscillations from planar groups along aromatic polymer backbones, while preserving the dynamical properties of the system. We consider, as an example, the industrially important polymer, polyether ether ketone (PEEK), and show that this coarse graining technique maintains excellent agreement with the fully flexible all-atom and all-atom rigid bond models whilst allowing the time step to increase fivefold to 5 fs.

Manganese catalyzed reductive amination of aldehydes using hydrogen as a reductant.

PubMed

Wei, Duo; Bruneau-Voisine, Antoine; Valyaev, Dmitry A; Lugan, Noël; Sortais, Jean-Baptiste

2018-04-24

A one-pot two-step procedure was developed for the alkylation of amines via reductive amination of aldehydes using molecular dihydrogen as a reductant in the presence of a manganese pyridinyl-phosphine complex as a pre-catalyst. After the initial condensation step, the reduction of imines formed in situ is performed under mild conditions (50-100 °C) with 2 mol% of catalyst and 5 mol% of tBuOK under 50 bar of hydrogen. Excellent yields (>90%) were obtained for a large combination of aldehydes and amines (40 examples), including aliphatic aldehydes and amino-alcohols.

Nonpareil 3: Fast Estimation of Metagenomic Coverage and Sequence Diversity.

PubMed

Rodriguez-R, Luis M; Gunturu, Santosh; Tiedje, James M; Cole, James R; Konstantinidis, Konstantinos T

2018-01-01

Estimations of microbial community diversity based on metagenomic data sets are affected, often to an unknown degree, by biases derived from insufficient coverage and reference database-dependent estimations of diversity. For instance, the completeness of reference databases cannot be generally estimated since it depends on the extant diversity sampled to date, which, with the exception of a few habitats such as the human gut, remains severely undersampled. Further, estimation of the degree of coverage of a microbial community by a metagenomic data set is prohibitively time-consuming for large data sets, and coverage values may not be directly comparable between data sets obtained with different sequencing technologies. Here, we extend Nonpareil, a database-independent tool for the estimation of coverage in metagenomic data sets, to a high-performance computing implementation that scales up to hundreds of cores and includes, in addition, a k -mer-based estimation as sensitive as the original alignment-based version but about three hundred times as fast. Further, we propose a metric of sequence diversity ( N d ) derived directly from Nonpareil curves that correlates well with alpha diversity assessed by traditional metrics. We use this metric in different experiments demonstrating the correlation with the Shannon index estimated on 16S rRNA gene profiles and show that N d additionally reveals seasonal patterns in marine samples that are not captured by the Shannon index and more precise rankings of the magnitude of diversity of microbial communities in different habitats. Therefore, the new version of Nonpareil, called Nonpareil 3, advances the toolbox for metagenomic analyses of microbiomes. IMPORTANCE Estimation of the coverage provided by a metagenomic data set, i.e., what fraction of the microbial community was sampled by DNA sequencing, represents an essential first step of every culture-independent genomic study that aims to robustly assess the sequence diversity present in a sample. However, estimation of coverage remains elusive because of several technical limitations associated with high computational requirements and limiting statistical approaches to quantify diversity. Here we described Nonpareil 3, a new bioinformatics algorithm that circumvents several of these limitations and thus can facilitate culture-independent studies in clinical or environmental settings, independent of the sequencing platform employed. In addition, we present a new metric of sequence diversity based on rarefied coverage and demonstrate its use in communities from diverse ecosystems.

If Medicare Were to Negotiate Drug Prices, How Would it Determine a ‘Fair’ Price for a Cancer Treatment?

Cancer.gov

Steven D. Pearson, MD, MSc, FRCP, is the Founder and President of the Institute for Clinical and Economic Review (ICER). ICER is a leader in bringing stakeholders together to collaborate in the evaluation of the comparative effectiveness of medical interventions. The Institute also helps translate comparative effectiveness information into distinctive formats for patients, clinicians, and policy makers to enable them to make better use of evidence throughout the health care system. Dr. Pearson is also a Lecturer in the Department of Population Medicine at Harvard Medical School, as well as serving as Visiting Scientist in the Department of Bioethics at the National Institutes of Health. He attended UCSF School of Medicine, completed his residency in internal medicine at Brigham and Women’s Hospital in Boston, and obtained a Master of Science Degree in Health Policy and Management at the Harvard School of Public Health. An internist, health services researcher, and ethicist, Dr. Pearson has served in many advisory and leadership roles in academia and government. He was awarded an Atlantic Fellowship from the British Government in 2004 and chose to serve as Senior Fellow at the National Institute for Health and Clinical Excellence (NICE). Returning to the United States in 2005, he was asked to serve for one year as Special Advisor, Technology and Coverage Policy, within the Coverage and Analysis Group at the Centers for Medicare and Medicaid Services. He has also served as Senior Fellow at America’s Health Insurance Plans, as the Vice Chair of the Medicare Evidence Development and Coverage Advisory Committee (MedCAC), and as a Member of the Board of Directors of Health Technology Assessment International (HTAi). Dr. Pearson’s ongoing academic work combines efforts in comparative effectiveness research, health policy, and bioethics. His published work includes numerous articles and commentaries on the role of evidence in the health care system, and the book No Margin, No Mission: Health Care Organizations and the Quest for Ethical Excellence. If you are a person with a disability and require an assistive device, services or other reasonable accommodations to participate in this activity, please contact the Cancer Prevention Fellowship Program at (240) 276-5626 at least one week in advance of the lecture date to discuss your accommodation needs.

Cationic carbon quantum dots derived from alginate for gene delivery: One-step synthesis and cellular uptake.

PubMed

Zhou, Jie; Deng, Wenwen; Wang, Yan; Cao, Xia; Chen, Jingjing; Wang, Qiang; Xu, Wenqian; Du, Pan; Yu, Qingtong; Chen, Jiaxin; Spector, Myron; Yu, Jiangnan; Xu, Ximing

2016-09-15

Carbon quantum dots (CQDs), unlike semiconductor quantum dots, possess fine biocompatibility, excellent upconversion properties, high photostability and low toxicity. Here, we report multifunctional CQDs which were developed using alginate, 3% hydrogen peroxide and double distilled water through a facile, eco-friendly and inexpensive one-step hydrothermal carbonization route. In this reaction, the alginate served as both the carbon source and the cationization agent. The resulting CQDs exhibited strong and stable fluorescence with water-dispersible and positively-charged properties which could serve as an excellent DNA condensation. As non-viral gene vector being used for the first time, the CQDs showed considerably high transfection efficiency (comparable to Lipofectamine2000 and significantly higher than PEI, p<0.05) and negligible toxicity. The photoluminescence properties of CQDs also permitted easy tracking of the cellular-uptake. The findings showed that both caveolae- and clathrin-mediated endocytosis pathways were involved in the internalization process of CQDs/pDNA complexes. Taken together, the alginate-derived photoluminescent CQDs hold great potential in biomedical applications due to their dual role as efficient non-viral gene vectors and bioimaging probes. This manuscript describes a facile and simple one-step hydrothermal carbonization route for preparing optically tunable photoluminescent carbon quantum dots (CQDs) from a novel raw material, alginate. These CQDs enjoy low cytotoxicity, positive zeta potential, excellent ability to condense macromolecular DNA, and most importantly, notably high transfection efficiency. The interesting finding is that the negatively-charged alginate can convert into positively charged CQDs without adding any cationic reagents. The significance of this study is that the cationic carbon quantum dots play dual roles as both non-viral gene vectors and bioimaging probes at the same time, which are most desirable in many fields of applications such as gene therapy, drug delivery, and bioimaging. Copyright © 2016 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Patient satisfaction: focusing on "excellent".

PubMed

Otani, Koichiro; Waterman, Brian; Faulkner, Kelly M; Boslaugh, Sarah; Burroughs, Thomas E; Dunagan, W Claiborne

2009-01-01

In an emerging competitive market such as healthcare, managers should focus on achieving excellent ratings to distinguish their organization from others. When it comes to customer loyalty, "excellent" has a different meaning. Customers who are merely satisfied often do not come back. The purpose of this study was to find out what influences adult patients to rate their overall experience as "excellent." The study used patient satisfaction data collected from one major academic hospital and four community hospitals. After conducting a multiple logistic regression analysis, certain attributes were shown to be more likely than others to influence patients to rate their experiences as excellent. The study revealed that staff care is the most influential attribute, followed by nursing care. These two attributes are distinctively stronger drivers of overall satisfaction than are the other attributes studied (i.e., physician care, admission process, room, and food). Staff care and nursing care are under the control of healthcare managers. If improvements are needed, they can be accomplished through training programs such as total quality management or continuous quality improvement, through which staff employees and nurses learn to be sensitive to patients' needs. Satisfying patients' needs is the first step toward having loyal patients, so hospitals that strive to ensure their patients are completely satisfied are more likely to prosper.

Newspaper coverage of residential fires: an opportunity for prevention communication.

PubMed

Clegg Smith, Katherine; Cho, Juhee; Gielen, Andrea; Vernick, Jon S

2007-04-01

Worldwide, fire-related burns are a major cause of unintentional injury, morbidity and mortality, with the majority of deaths occurring in developing countries. In the US, as in other countries, most fatal fires occur in the home. Effective prevention strategies for residential fires are, however, currently underutilized. The news media is one available communication channel to promote such strategies, and analyzing current news coverage is a first step towards incorporating media advocacy into injury prevention efforts related to residential fires. Four daily newspapers circulating widely in Maryland were monitored for 1 year. Articles describing residential fires were coded for measures of prominence, content and frame. Analysis focused on measures of issue newsworthiness, reporting of causation and consequences of fires, and inclusion of public health context and conveyance of prevention messages. The data indicate that fires are newsworthy, with 374 relevant news articles in a 1-year period, 32% of which appear on the first page of a section. Coverage generally concerned recent local fire events. Most articles discussed the consequences of fires (88%), and identified a causal factor (58%). Only 36%, however, included prevention information, and less than one-quarter set residential fires in a public health context. The newsworthiness of residential fires provides a clear opportunity for widespread communication around injury prevention. Improving media advocacy will entail framing discussion of recent fire events in such a way as to support inclusion of prevention strategies and a public health context in news coverage.

Newspaper coverage of residential fires: an opportunity for prevention communication

PubMed Central

Smith, Katherine Clegg; Cho, Juhee; Gielen, Andrea; Vernick, Jon S

2007-01-01

Background Worldwide, fire-related burns are a major cause of unintentional injury, morbidity and mortality, with the majority of deaths occurring in developing countries. In the US, as in other countries, most fatal fires occur in the home. Effective prevention strategies for residential fires are, however, currently underutilized. The news media is one available communication channel to promote such strategies, and analyzing current news coverage is a first step towards incorporating media advocacy into injury prevention efforts related to residential fires. Methods Four daily newspapers circulating widely in Maryland were monitored for 1 year. Articles describing residential fires were coded for measures of prominence, content and frame. Analysis focused on measures of issue newsworthiness, reporting of causation and consequences of fires, and inclusion of public health context and conveyance of prevention messages. Results The data indicate that fires are newsworthy, with 374 relevant news articles in a 1-year period, 32% of which appear on the first page of a section. Coverage generally concerned recent local fire events. Most articles discussed the consequences of fires (88%), and identified a causal factor (58%). Only 36%, however, included prevention information, and less than one-quarter set residential fires in a public health context. Conclusion The newsworthiness of residential fires provides a clear opportunity for widespread communication around injury prevention. Improving media advocacy will entail framing discussion of recent fire events in such a way as to support inclusion of prevention strategies and a public health context in news coverage. PMID:17446251

Selective robust optimization: A new intensity-modulated proton therapy optimization strategy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Yupeng; Niemela, Perttu; Siljamaki, Sami

2015-08-15

Purpose: To develop a new robust optimization strategy for intensity-modulated proton therapy as an important step in translating robust proton treatment planning from research to clinical applications. Methods: In selective robust optimization, a worst-case-based robust optimization algorithm is extended, and terms of the objective function are selectively computed from either the worst-case dose or the nominal dose. Two lung cancer cases and one head and neck cancer case were used to demonstrate the practical significance of the proposed robust planning strategy. The lung cancer cases had minimal tumor motion less than 5 mm, and, for the demonstration of the methodology,more » are assumed to be static. Results: Selective robust optimization achieved robust clinical target volume (CTV) coverage and at the same time increased nominal planning target volume coverage to 95.8%, compared to the 84.6% coverage achieved with CTV-based robust optimization in one of the lung cases. In the other lung case, the maximum dose in selective robust optimization was lowered from a dose of 131.3% in the CTV-based robust optimization to 113.6%. Selective robust optimization provided robust CTV coverage in the head and neck case, and at the same time improved controls over isodose distribution so that clinical requirements may be readily met. Conclusions: Selective robust optimization may provide the flexibility and capability necessary for meeting various clinical requirements in addition to achieving the required plan robustness in practical proton treatment planning settings.« less

A machine learning approach for classification of anatomical coverage in CT

NASA Astrophysics Data System (ADS)

Wang, Xiaoyong; Lo, Pechin; Ramakrishna, Bharath; Goldin, Johnathan; Brown, Matthew

2016-03-01

Automatic classification of anatomical coverage of medical images is critical for big data mining and as a pre-processing step to automatically trigger specific computer aided diagnosis systems. The traditional way to identify scans through DICOM headers has various limitations due to manual entry of series descriptions and non-standardized naming conventions. In this study, we present a machine learning approach where multiple binary classifiers were used to classify different anatomical coverages of CT scans. A one-vs-rest strategy was applied. For a given training set, a template scan was selected from the positive samples and all other scans were registered to it. Each registered scan was then evenly split into k × k × k non-overlapping blocks and for each block the mean intensity was computed. This resulted in a 1 × k3 feature vector for each scan. The feature vectors were then used to train a SVM based classifier. In this feasibility study, four classifiers were built to identify anatomic coverages of brain, chest, abdomen-pelvis, and chest-abdomen-pelvis CT scans. Each classifier was trained and tested using a set of 300 scans from different subjects, composed of 150 positive samples and 150 negative samples. Area under the ROC curve (AUC) of the testing set was measured to evaluate the performance in a two-fold cross validation setting. Our results showed good classification performance with an average AUC of 0.96.

Sentinel-3 coverage-driven mission design: Coupling of orbit selection and instrument design

NASA Astrophysics Data System (ADS)

Cornara, S.; Pirondini, F.; Palmade, J. L.

2017-11-01

The first satellite of the Sentinel-3 series was launched in February 2016. Sentinel-3 payload suite encompasses the Ocean and Land Colour Instrument (OLCI) with a swath of 1270 km, the Sea and Land Surface Temperature Radiometer (SLSTR) yielding a dual-view scan with swaths of 1420 km (nadir) and 750 km (oblique view), the Synthetic Aperture Radar Altimeter (SRAL) working in Ku-band and C-band, and the dual-frequency Microwave Radiometer (MWR). In the early stages of mission and system design, the main driver for the Sentinel-3 reference orbit selection was the requirement to achieve a revisit time of two days or less globally over ocean areas with two satellites (i.e. 4-day global coverage with one satellite). The orbit selection was seamlessly coupled with the OLCI instrument design in terms of field of view (FoV) definition driven by the observation zenith angle (OZA) and sunglint constraints applied to ocean observations. The criticality of the global coverage requirement for ocean monitoring derives from the sunglint phenomenon, i.e. the impact on visible channels of the solar ray reflection on the water surface. This constraint was finally overcome thanks to the concurrent optimisation of the orbit parameters, notably the Local Time at Descending Node (LTDN), and the OLCI instrument FoV definition. The orbit selection process started with the identification of orbits with short repeat cycle (2-4 days), firstly to minimise the time required to achieve global coverage with existing constraints, and then to minimise the swath required to obtain global coverage and the maximum required OZA. This step yielded the selection of a 4-day repeat cycle orbit, thus allowing 2-day coverage with two adequately spaced satellites. Then suitable candidate orbits with higher repeat cycles were identified in the proximity of the selected altitudes and the reference orbit was ultimately chosen. Rationale was to keep the swath for global coverage as close as possible to the previous optimum value, but to tailor the repeat cycle length (i.e. the ground-track grid) to optimise the topography mission performances. The final choice converged on the sun-synchronous orbit 14 + 7/27, reference altitude ∼800 km, LTDN = 10h00. Extensive coverage analyses were carried out to characterise the mission performance and the fulfilment of the requirements, encompassing revisit time, number of acquisitions, observation viewing geometry and swath properties. This paper presents a comprehensive overview of the Sentinel-3 orbit selection, starting from coverage requirements and highlighting the close interaction with the instrument design activity.

The Plasma Interaction Experiment (PIX) description and test program. [electrometers

NASA Technical Reports Server (NTRS)

Ignaczak, L. R.; Haley, F. A.; Domino, E. J.; Culp, D. H.; Shaker, F. J.

1978-01-01

The plasma interaction experiment (PIX) is a battery powered preprogrammed auxiliary payload on the LANDSAT-C launch. This experiment is part of a larger program to investigate space plasma interactions with spacecraft surfaces and components. The varying plasma densities encountered during available telemetry coverage periods are deemed sufficient to determine first order interactions between the space plasma environment and the biased experimental surfaces. The specific objectives of the PIX flight experiment are to measure the plasma coupling current and the negative voltage breakdown characteristics of a solar array segment and a gold plated steel disk. Measurements will be made over a range of surface voltages up to plus or minus kilovolt. The orbital environment will provide a range of plasma densities. The experimental surfaces will be voltage biased in a preprogrammed step sequence to optimize the data returned for each plasma region and for the available telemetry coverage.

[Health equity in the world's most unequal region: a challenge for public policy in Latin America].

PubMed

Frenz, Patricia; Titelman, Daniel

2013-01-01

Re-democratization has transformed the social agenda and the role of the state in Latin America with a growing commitment to health equity and social justice, yet these aspirations are strained by the region´s profound socioeconomic inequalities. Efforts to provide universal coverage to the right to health have led to the development of a variety of public policies, whose scope depends on how the concepts of health and equity are understood. In general, policy action has centered on health system reforms and only recently on integrated intersectorial action to address wider social determinants of health, particularly structural determinants. Furthermore, if the goal is health equity the predominant minimum standards approach cannot be the final answer, but only a step on the road to equality. Finally, realizing universal coverage of the right to health through public policy requires the strengthening of governmental institutional capacities with an intersectorial and participatory lens.

Integrated vector management: the Zambian experience.

PubMed

Chanda, Emmanuel; Masaninga, Fred; Coleman, Michael; Sikaala, Chadwick; Katebe, Cecilia; Macdonald, Michael; Baboo, Kumar S; Govere, John; Manga, Lucien

2008-08-27

The Zambian Malaria Control Programme with the Roll Back Malaria (RBM) partners have developed the current National Malaria Strategic Plan (NMSP 2006-2011) which focuses on prevention based on the Integrated Vector Management (IVM) strategy. The introduction and implementation of an IVM strategy was planned in accordance with the World Health Organization (WHO) steps towards IVM implementation namely Introduction Phase, Consolidation Phase and Expansion Phase. IVM has created commitment for Legal and Regulatory policy review, monitoring, Research and a strong stewardship by the chemical suppliers. It has also leveraged additional resources, improved inter-sectoral collaboration, capacity building and enhanced community participation which facilitated a steady scaling up in coverage and utilisation of key preventive interventions. Thus, markedly reducing malaria incidence and case fatalities in the country. Zambia has successfully introduced, consolidated and expanded IVM activities. Resulting in increased coverage and utilization of interventions and markedly reducing malaria-related morbidity and mortality while ensuring a better protection of the environment.

In situ spectroscopy of ligand exchange reactions at the surface of colloidal gold and silver nanoparticles

NASA Astrophysics Data System (ADS)

Dinkel, Rebecca; Peukert, Wolfgang; Braunschweig, Björn

2017-04-01

Gold and silver nanoparticles with their tunable optical and electronic properties are of great interest for a wide range of applications. Often the ligands at the surface of the nanoparticles have to be exchanged in a second step after particle formation in order to obtain a desired surface functionalization. For many techniques, this process is not accessible in situ. In this review, we present second-harmonic scattering (SHS) as an inherently surface sensitive and label-free optical technique to probe the ligand exchange at the surface of colloidal gold and silver nanoparticles in situ and in real time. First, a brief introduction to SHS and basic features of the SHS of nanoparticles are given. After that, we demonstrate how the SHS intensity decrease can be correlated to the thiol coverage which allows for the determination of the Gibbs free energy of adsorption and the surface coverage.

The need for targeted implementation research to improve coverage of basic vaccines and introduction of new vaccines.

PubMed

Arora, Narendra K; Lal, Altaf A; Hombach, Joachim M; Santos, Jose I; Bhutta, Zulfiqar A; Sow, Samba O; Greenwood, Brian

2013-04-18

The Decade of Vaccines Collaboration (DoVC) Research and Development (R&D) Working Group identified implementation research as an important step toward achieving high vaccine coverage and the uptake of desirable new vaccines. The R&D Working Group noted that implementation research is highly complex and requires participation of stakeholders from diverse backgrounds to ensure effective planning, execution, interpretation, and adoption of research outcomes. Unlike other scientific disciplines, implementation research is highly contextual and depends on social, cultural, geographic, and economic factors to make the findings useful for local, national, and regional applications. This paper presents the broad framework for implementation research in support of immunization and sets out a series of research questions developed through a Delphi process (during a DoVC-supported workshop in Sitges, Spain) and a literature review. Copyright © 2013 Elsevier Ltd. All rights reserved.

Universal coverage with insecticide-treated nets - applying the revised indicators for ownership and use to the Nigeria 2010 malaria indicator survey data.

PubMed

Kilian, Albert; Koenker, Hannah; Baba, Ebenezer; Onyefunafoa, Emmanuel O; Selby, Richmond A; Lokko, Kojo; Lynch, Matthew

2013-09-10

Until recently only two indicators were used to evaluate malaria prevention with insecticide-treated nets (ITN): "proportion of households with any ITN" and "proportion of the population using an ITN last night". This study explores the potential of the expanded set of indicators recommended by the Roll Back Malaria Monitoring and Evaluation Reference Group (MERG) for comprehensive analysis of universal coverage with ITN by applying them to the Nigeria 2010 Malaria Indicator Survey data. The two additional indicators of "proportion of households with at least one ITN for every two people" and "proportion of population with access to an ITN within the household" were calculated as recommended by MERG. Based on the estimates for each of the four ITN indicators three gaps were calculated: i) households with no ITN, ii) households with any but not enough ITN, iii) population with access to ITN not using it. In addition, coverage with at least one ITN at community level was explored by applying Lot Quality Assurance Sampling (LQAS) decision rules to the cluster level of the data. All outcomes were analysed by household background characteristics and whether an ITN campaign had recently been done. While the proportion of households with any ITN was only 42% overall, it was 75% in areas with a recent mass campaign and in these areas 66% of communities had coverage of 80% or better. However, the campaigns left a considerable intra-household ownership gap with 66% of households with any ITN not having enough for every family member. In contrast, the analysis comparing actual against potential use showed that ITN utilization was good overall with only 19% of people with access not using the ITN, but with a significant difference between the North, where use was excellent (use gap 11%), and the South (use gap 36%) indicating the need for enhanced behaviour change communication. The expanded ITN indicators to assess universal coverage provide strong tools for a comprehensive system effectiveness analysis that produces clear, actionable evidence of progress as well as the need for specific additional interventions clearly differentiating between gaps in ownership and use.

Genotator: a disease-agnostic tool for genetic annotation of disease.

PubMed

Wall, Dennis P; Pivovarov, Rimma; Tong, Mark; Jung, Jae-Yoon; Fusaro, Vincent A; DeLuca, Todd F; Tonellato, Peter J

2010-10-29

Disease-specific genetic information has been increasing at rapid rates as a consequence of recent improvements and massive cost reductions in sequencing technologies. Numerous systems designed to capture and organize this mounting sea of genetic data have emerged, but these resources differ dramatically in their disease coverage and genetic depth. With few exceptions, researchers must manually search a variety of sites to assemble a complete set of genetic evidence for a particular disease of interest, a process that is both time-consuming and error-prone. We designed a real-time aggregation tool that provides both comprehensive coverage and reliable gene-to-disease rankings for any disease. Our tool, called Genotator, automatically integrates data from 11 externally accessible clinical genetics resources and uses these data in a straightforward formula to rank genes in order of disease relevance. We tested the accuracy of coverage of Genotator in three separate diseases for which there exist specialty curated databases, Autism Spectrum Disorder, Parkinson's Disease, and Alzheimer Disease. Genotator is freely available at http://genotator.hms.harvard.edu. Genotator demonstrated that most of the 11 selected databases contain unique information about the genetic composition of disease, with 2514 genes found in only one of the 11 databases. These findings confirm that the integration of these databases provides a more complete picture than would be possible from any one database alone. Genotator successfully identified at least 75% of the top ranked genes for all three of our use cases, including a 90% concordance with the top 40 ranked candidates for Alzheimer Disease. As a meta-query engine, Genotator provides high coverage of both historical genetic research as well as recent advances in the genetic understanding of specific diseases. As such, Genotator provides a real-time aggregation of ranked data that remains current with the pace of research in the disease fields. Genotator's algorithm appropriately transforms query terms to match the input requirements of each targeted databases and accurately resolves named synonyms to ensure full coverage of the genetic results with official nomenclature. Genotator generates an excel-style output that is consistent across disease queries and readily importable to other applications.

Equity in disease prevention: Vaccines for the older adults - a national workshop, Australia 2014.

PubMed

Raina MacIntyre, C; Menzies, Robert; Kpozehouen, Elizabeth; Chapman, Michael; Travaglia, Joanne; Woodward, Michael; Jackson Pulver, Lisa; Poulos, Christopher J; Gronow, David; Adair, Timothy

2016-11-04

On the 20th June, 2014 the National Health and Medical Research Council's Centre for Research Excellence in Population Health "Immunisation in under Studied and Special Risk Populations", in collaboration with the Public Health Association of Australia, hosted a workshop "Equity in disease prevention: vaccines for the older adults". The workshop featured international and national speakers on ageing and vaccinology. The workshop was attended by health service providers, stakeholders in immunisation, ageing, primary care, researchers, government and non-government organisations, community representatives, and advocacy groups. The aims of the workshop were to: provide an update on the latest evidence around immunisation for the older adults; address barriers for prevention of infection in the older adults; and identify immunisation needs of these groups and provide recommendations to inform policy. There is a gap in immunisation coverage of funded vaccines between adults and infants. The workshop reviewed provider misconceptions, lack of Randomised Control Trials (RCT) and cost-effectiveness data in the frail elderly, loss of autonomy, value judgements and ageism in health care and the need for an adult vaccination register. Workshop recommendations included recognising the right of elderly people to prevention, the need for promotion in the community and amongst healthcare workers of the high burden of vaccine preventable diseases and the need to achieve high levels of vaccination coverage, in older adults and in health workers involved in their care. Research into new vaccine strategies for older adults which address poor coverage, provider attitudes and immunosenescence is a priority. A well designed national register for tracking vaccinations in older adults is a vital and basic requirement for a successful adult immunisation program. Eliminating financial barriers, by addressing inequities in the mechanisms for funding and subsidising vaccines for the older adults compared to those for children, is important to improve equity of access and vaccination coverage. Vaccination coverage rates should be included in quality indicators of care in residential aged care for older adults. Vaccination is key to healthy ageing, and there is a need to focus on reducing the immunisation gap between adults and children. Copyright © 2016.

Structural requirements and reaction pathways in dimethyl ether combustion catalyzed by supported Pt clusters.

PubMed

Ishikawa, Akio; Neurock, Matthew; Iglesia, Enrique

2007-10-31

The identity and reversibility of the elementary steps required for catalytic combustion of dimethyl ether (DME) on Pt clusters were determined by combining isotopic and kinetic analyses with density functional theory estimates of reaction energies and activation barriers to probe the lowest energy paths. Reaction rates are limited by C-H bond activation in DME molecules adsorbed on surfaces of Pt clusters containing chemisorbed oxygen atoms at near-saturation coverages. Reaction energies and activation barriers for C-H bond activation in DME to form methoxymethyl and hydroxyl surface intermediates show that this step is more favorable than the activation of C-O bonds to form two methoxides, consistent with measured rates and kinetic isotope effects. This kinetic preference is driven by the greater stability of the CH3OCH2* and OH* intermediates relative to chemisorbed methoxides. Experimental activation barriers on Pt clusters agree with density functional theory (DFT)-derived barriers on oxygen-covered Pt(111). Measured DME turnover rates increased with increasing DME pressure, but decreased as the O2 pressure increased, because vacancies (*) on Pt surfaces nearly saturated with chemisorbed oxygen are required for DME chemisorption. DFT calculations show that although these surface vacancies are required, higher oxygen coverages lead to lower C-H activation barriers, because the basicity of oxygen adatoms increases with coverage and they become more effective in hydrogen abstraction from DME. Water inhibits reaction rates via quasi-equilibrated adsorption on vacancy sites, consistent with DFT results indicating that water binds more strongly than DME on vacancies. These conclusions are consistent with the measured kinetic response of combustion rates to DME, O2, and H2O, with H/D kinetic isotope effects, and with the absence of isotopic scrambling in reactants containing isotopic mixtures of 18O2-16O2 or 12CH3O12CH3-13CH3O13CH3. Turnover rates increased with Pt cluster size, because small clusters, with more coordinatively unsaturated surface atoms, bind oxygen atoms more strongly than larger clusters and exhibit lower steady-state vacancy concentrations and a consequently smaller number of adsorbed DME intermediates involved in kinetically relevant steps. These effects of cluster size and metal-oxygen bond energies on reactivity are ubiquitous in oxidation reactions requiring vacancies on surfaces nearly saturated with intermediates derived from O2.

Sampling large landscapes with small-scale stratification-User's Manual

USGS Publications Warehouse

Bart, Jonathan

2011-01-01

This manual explains procedures for partitioning a large landscape into plots, assigning the plots to strata, and selecting plots in each stratum to be surveyed. These steps are referred to as the "sampling large landscapes (SLL) process." We assume that users of the manual have a moderate knowledge of ArcGIS and Microsoft ® Excel. The manual is written for a single user but in many cases, some steps will be carried out by a biologist designing the survey and some steps will be carried out by a quantitative assistant. Thus, the manual essentially may be passed back and forth between these users. The SLL process primarily has been used to survey birds, and we refer to birds as subjects of the counts. The process, however, could be used to count any objects. ®

Self-assembly and continuous growth of hexagonal graphene flakes on liquid Cu

NASA Astrophysics Data System (ADS)

Cho, Seong-Yong; Kim, Min-Sik; Kim, Minsu; Kim, Ki-Ju; Kim, Hyun-Mi; Lee, Do-Joong; Lee, Sang-Hoon; Kim, Ki-Bum

2015-07-01

Graphene growth on liquid Cu has received great interest, owing to the self-assembly behavior of hexagonal graphene flakes with aligned orientation and to the possibility of forming a single grain of graphene through a commensurate growth of these graphene flakes. Here, we propose and demonstrate a two-step growth process which allows the formation of self-assembled, completely continuous graphene on liquid Cu. After the formation of full coverage on the liquid Cu, grain boundaries were revealed via selective hydrogen etching and the original grain boundaries were clearly resolved. This result indicates that, while the flakes self-assembled with the same orientation, there still remain structural defects, gaps and voids that were not resolved by optical microscopy or scanning electron microscopy. To overcome this limitation, the two-step growth process was employed, consisting of a sequential process of a normal single-layer graphene growth and self-assembly process with a low carbon flux, followed by the final stage of graphene growth at a high degree of supersaturation with a high carbon flux. Continuity of the flakes was verified via hydrogen etching and a NaCl-assisted oxidation process, as well as by measuring the electrical properties of the graphene grown by the two-step process. Two-step growth can provide a continuous graphene layer, but commensurate stitching should be further studied.Graphene growth on liquid Cu has received great interest, owing to the self-assembly behavior of hexagonal graphene flakes with aligned orientation and to the possibility of forming a single grain of graphene through a commensurate growth of these graphene flakes. Here, we propose and demonstrate a two-step growth process which allows the formation of self-assembled, completely continuous graphene on liquid Cu. After the formation of full coverage on the liquid Cu, grain boundaries were revealed via selective hydrogen etching and the original grain boundaries were clearly resolved. This result indicates that, while the flakes self-assembled with the same orientation, there still remain structural defects, gaps and voids that were not resolved by optical microscopy or scanning electron microscopy. To overcome this limitation, the two-step growth process was employed, consisting of a sequential process of a normal single-layer graphene growth and self-assembly process with a low carbon flux, followed by the final stage of graphene growth at a high degree of supersaturation with a high carbon flux. Continuity of the flakes was verified via hydrogen etching and a NaCl-assisted oxidation process, as well as by measuring the electrical properties of the graphene grown by the two-step process. Two-step growth can provide a continuous graphene layer, but commensurate stitching should be further studied. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr03352g

Critical Motor Number for Fractional Steps of Cytoskeletal Filaments in Gliding Assays

PubMed Central

Li, Xin; Lipowsky, Reinhard; Kierfeld, Jan

2012-01-01

In gliding assays, filaments are pulled by molecular motors that are immobilized on a solid surface. By varying the motor density on the surface, one can control the number of motors that pull simultaneously on a single filament. Here, such gliding assays are studied theoretically using Brownian (or Langevin) dynamics simulations and taking the local force balance between motors and filaments as well as the force-dependent velocity of the motors into account. We focus on the filament stepping dynamics and investigate how single motor properties such as stalk elasticity and step size determine the presence or absence of fractional steps of the filaments. We show that each gliding assay can be characterized by a critical motor number, . Because of thermal fluctuations, fractional filament steps are only detectable as long as . The corresponding fractional filament step size is where is the step size of a single motor. We first apply our computational approach to microtubules pulled by kinesin-1 motors. For elastic motor stalks that behave as linear springs with a zero rest length, the critical motor number is found to be , and the corresponding distributions of the filament step sizes are in good agreement with the available experimental data. In general, the critical motor number depends on the elastic stalk properties and is reduced to for linear springs with a nonzero rest length. Furthermore, is shown to depend quadratically on the motor step size . Therefore, gliding assays consisting of actin filaments and myosin-V are predicted to exhibit fractional filament steps up to motor number . Finally, we show that fractional filament steps are also detectable for a fixed average motor number as determined by the surface density (or coverage) of the motors on the substrate surface. PMID:22927953

Superhydrophobic copper surfaces fabricated by fatty acid soaps in aqueous solution for excellent corrosion resistance

NASA Astrophysics Data System (ADS)

Xu, Wenlong; Hu, Yuanyuan; Bao, Wenda; Xie, Xiaoyu; Liu, Yiran; Song, Aixin; Hao, Jingcheng

2017-03-01

A simple and safe one-step immersion method was developed to obtain the stable superhydrophobic copper surfaces with excellent corrosion resistance ability using fatty acids in water-medium instead of ethanol. An organic alkali, N,N-dimethylcyclohexylamine (DMCHA), was chosen to solve the poor solubility of fatty acids in water and the high Krafft point of carboxylate salts with inorganic counterions. The superhydrophobic property can be realized in a much quicker process (7.5 min) in aqueous solution than in ethanol (more than 2 d), which is universally feasible for the fabrication of superhydrophobic metal surfaces in industry scale, thereby greatly increasing the safety in industrial manufacture.

[Deep brain stimulation in parkinsonian patients with dopa intolerance].

PubMed

García-Ruiz, Pedro J; Feliz-Feliz, Cici; Ayerbe Gracia, Joaquín; Matías Arbelo, José; Salvador, Carlos; Val Fernández, Javier Del; García-Caldentey, Juan

2017-10-28

Deep brain stimulation (DBS) is at present, a useful treatment for patients with advanced Parkinson's disease and motor complications. The crucial step toward consistent DBS outcomes remains careful patient selection; several conditions must be fulfilled including excellent levo dopa response. We report two cases of early onset Parkinson's disease with severe intolerance to levo dopa but excellent and sustained response to DBS. DBS can be a useful alternative for parkinsonian patients with severe intolerance to levo dopa, provided a positive acute response to levo dopa or apomorphine is obtained. Copyright © 2017 Sociedad Española de Neurocirugía. Publicado por Elsevier España, S.L.U. All rights reserved.

Design and fabrication of highly sensitive and stable biochip for glucose biosensing

NASA Astrophysics Data System (ADS)

Lu, Shi-Yu; Lu, Yao; Jin, Meng; Bao, Shu-Juan; Li, Wan-Yun; Yu, Ling

2017-11-01

Common producing steps for test strips is complex and fussy. In this work, we proposed a feasible binder-free test strips fabrication method to directly grow enzyme/manganese phosphate nanosheets hybrids on the screen-print electrodes (SPE). Combined with microfluidic packaging technology, the ready-made portable electrochemical biochip shows a wider linear range (1-40 mM, R2 = 0.9998) and excellent stability (maintained 98% response current after 20 days store and retained 75% response current after continuous 30 days determination) for the detection of glucose. Compared with commercial test strips, the biochip exhibits excellent sensitivity, stability and accuracy, which is indicative of its potential application in real samples.

Reliability and validity of a smartphone-based assessment of gait parameters across walking speed and smartphone locations: Body, bag, belt, hand, and pocket.

PubMed

Silsupadol, Patima; Teja, Kunlanan; Lugade, Vipul

2017-10-01

The assessment of spatiotemporal gait parameters is a useful clinical indicator of health status. Unfortunately, most assessment tools require controlled laboratory environments which can be expensive and time consuming. As smartphones with embedded sensors are becoming ubiquitous, this technology can provide a cost-effective, easily deployable method for assessing gait. Therefore, the purpose of this study was to assess the reliability and validity of a smartphone-based accelerometer in quantifying spatiotemporal gait parameters when attached to the body or in a bag, belt, hand, and pocket. Thirty-four healthy adults were asked to walk at self-selected comfortable, slow, and fast speeds over a 10-m walkway while carrying a smartphone. Step length, step time, gait velocity, and cadence were computed from smartphone-based accelerometers and validated with GAITRite. Across all walking speeds, smartphone data had excellent reliability (ICC 2,1 ≥0.90) for the body and belt locations, with bag, hand, and pocket locations having good to excellent reliability (ICC 2,1 ≥0.69). Correlations between the smartphone-based and GAITRite-based systems were very high for the body (r=0.89, 0.98, 0.96, and 0.87 for step length, step time, gait velocity, and cadence, respectively). Similarly, Bland-Altman analysis demonstrated that the bias approached zero, particularly in the body, bag, and belt conditions under comfortable and fast speeds. Thus, smartphone-based assessments of gait are most valid when placed on the body, in a bag, or on a belt. The use of a smartphone to assess gait can provide relevant data to clinicians without encumbering the user and allow for data collection in the free-living environment. Copyright © 2017 Elsevier B.V. All rights reserved.

Two-Step Irradiance Treatment Can Achieve Excellent Pain Control During Red Light 5-Aminolevulinic Acid Photodynamic Therapy for Actinic Keratoses.

PubMed

Paragh, Gyorgy; Zeitouni, Nathalie C

2018-03-01

To evaluate the ability of two-step irradiance to maintain pain control during red light 5-aminolevulinic acid (ALA) photodynamic therapy (PDT) for actinic keratoses (AK) and assess factors influencing pain. PDT provides excellent clinical and cosmetic results in the treatment AK and early basal cell carcinomas (BCC). Widespread use of PDT is limited, in part, by pain. A two-step irradiance method for PDT has previously been shown to significantly reduce PDT-associated pain during the treatment of BCC, but the ability of this method to limit pain during the treatment of AKs has not been reported. We performed a retrospective chart review to assess the level of pain during AK treatment by red light PDT (n = 99). Natural density filter was used to reduce the irradiance of the light source and initially 10 J/cm 2 dose was delivered at 35 mW/cm 2 and then, 65 J/cm 2 dose was delivered at 70 mW/cm 2 . Pain level was measured using a 10-point visual analog scale at three points during the procedure. Pain was low to moderate in most patients (mean ± standard error of the mean pain score: 2.35 ± 0.19). Higher pain was seen midprocedure versus at the beginning (p < 0.0001) and at the end (p = 0.003) of PDT. There was no significant difference in pain perception between genders and different treatment areas. Our results provide evidence that red light ALA PDT of AKs is very well tolerated with the two-step irradiance protocol.

To amend title XVIII of the Social Security Act to provide coverage for low vision devices under Medicare, and for other purposes.

THOMAS, 113th Congress

Rep. Owens, William L. [D-NY-21

2014-01-29

House - 01/29/2014 Referred to the Committee on Energy and Commerce, and in addition to the Committee on Ways and Means, for a period to be subsequently determined by the Speaker, in each case for consideration of such provisions as fall within the jurisdiction of the committee... (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

First-in-man study evaluating the safety and efficacy of a second generation biodegradable polymer sirolimus-eluting stent in the treatment of patients with de novo coronary lesions: clinical, Angiographic, and OCT outcomes of CREDIT-1.

PubMed

Wang, Geng; Sun, Zhongwei; Jin, Quanmin; Xu, Kai; Li, Yi; Wang, Xiaozeng; Ma, Yingyan; Liu, Haiwei; Zhao, Xin; Wang, Bin; Deng, Jie; Guan, Shaoyi; Ge, Meiling; Wang, Xiaoyan; Xu, Bo; Han, Yaling

2015-03-01

To evaluate the preliminary safety and efficacy of the EXCEL II stent system. Although the first biodegradable polymer drug-eluting stent (BP-DES), EXCEL, was launched nearly a decade ago, in-stent restenosis and stent thrombosis remain pertinent clinical problems in practice. A new cobalt-chromium BP-DES EXCEL II has been developed with the aim of improving stent safety and efficacy. Forty-five patients with single de novo native coronary lesions were enrolled and randomized to two groups in a 2:1 ratio, the 4-month follow-up group (n = 30) and the 12-month follow-up group (n = 15). All patients underwent percutaneous coronary intervention (PCI) with the EXCEL II stent system. Quantitative coronary angiography (QCA) and optical coherence tomography (OCT) were used to assess coronary vasculature at the designated 4- or 12-month follow-up. The primary outcome was major adverse cardiac events (MACE) at 30 days post-PCI. No MACE, thrombotic events, or target lesion failure was found in the 45 patients during the 12-month follow-up. There was no significant difference (P > 0.05) between the two groups in terms of in-stent and in-segment late lumen loss (LLL). No in-stent and in-segment restenosis was found in either group. At follow-up, the ratio of >10% uncovered struts per lesion was 26.67% in the 4-month group and 0% in the 12-month group (P < 0.05). Neointimal coverage in the 12-month group was significantly better than in the 4-month group (98.58% vs. 93.51%, P < 0.01). This first-in-man study demonstrates promising feasibility, safety, and efficacy of EXCEL II stents. These stents were found to have rapid endothelialization and low LLL rates at 4 and 12 months after implantation. © 2015 Wiley Periodicals, Inc.

Effects of Reduced Terrestrial LiDAR Point Density on High-Resolution Grain Crop Surface Models in Precision Agriculture

PubMed Central

Hämmerle, Martin; Höfle, Bernhard

2014-01-01

3D geodata play an increasingly important role in precision agriculture, e.g., for modeling in-field variations of grain crop features such as height or biomass. A common data capturing method is LiDAR, which often requires expensive equipment and produces large datasets. This study contributes to the improvement of 3D geodata capturing efficiency by assessing the effect of reduced scanning resolution on crop surface models (CSMs). The analysis is based on high-end LiDAR point clouds of grain crop fields of different varieties (rye and wheat) and nitrogen fertilization stages (100%, 50%, 10%). Lower scanning resolutions are simulated by keeping every n-th laser beam with increasing step widths n. For each iteration step, high-resolution CSMs (0.01 m2 cells) are derived and assessed regarding their coverage relative to a seamless CSM derived from the original point cloud, standard deviation of elevation and mean elevation. Reducing the resolution to, e.g., 25% still leads to a coverage of >90% and a mean CSM elevation of >96% of measured crop height. CSM types (maximum elevation or 90th-percentile elevation) react differently to reduced scanning resolutions in different crops (variety, density). The results can help to assess the trade-off between CSM quality and minimum requirements regarding equipment and capturing set-up. PMID:25521383

Evolution of carboxymethyl cellulose layer morphology on hydrophobic mineral surfaces: variation of polymer concentration and ionic strength.

PubMed

Beaussart, Audrey; Mierczynska-Vasilev, Agnieszka; Beattie, David A

2010-06-15

The adsorption of carboxymethyl cellulose (CMC) on the basal planes of talc and molybdenite has been studied using in situ atomic force microscope (AFM) imaging. These experiments were partnered with quantitative adsorption isotherm determinations on particulate samples. The isotherms revealed a clear increase of the CMC adsorbed amount upon increasing the solution ionic strength for adsorption on both minerals. In addition, the shapes of the isotherms changed in response to the change in the electrolyte concentration, with CMC on talc displaying stepped (10(-3) M KCl), Langmuir (10(-2) M KCl), then Freundlich isotherm shapes (10(-1) M KCl), and CMC on molybdenite displaying stepped (10(-3) M KCl), Freundlich (10(-2) M KCl), then Langmuir isotherm shapes (10(-1) M KCl). AFM imaging of the polymer layer on the mineral surfaces with varying solution conditions mirrored and confirmed the conclusions from the isotherms: as the polymer solution concentration increased, coverage on the basal plane increased; as the ionic strength increased, coverage on the basal plane increased and the morphology of the layer changed from isolated well-distributed polymer domains to extensive adsorption and formation of dense, uneven polymer domains/features. In addition, comparison of the talc and molybdenite datasets points toward the presence of different binding mechanisms for CMC adsorption on the talc and molybdenite basal plane surfaces. 2010 Elsevier Inc. All rights reserved.

The Next Step Trial: impact of a worksite colorectal cancer screening promotion program.

PubMed

Tilley, B C; Vernon, S W; Myers, R; Glanz, K; Lu, M; Hirst, K; Kristal, A R

1999-03-01

The Next Step Trial was a randomized trial of worksite colorectal cancer screening promotion and nutrition interventions for automobile industry employees at increased risk of colorectal cancer. Interventions were tested at 28 worksites with 5,042 employees. This report describes results of the screening promotion intervention. Worksites randomized to the control group received a standard program including rectal examination, fecal occult blood testing, and flexible sigmoidoscopy. Intervention worksites received an enhanced program (i.e., standard program plus an educational booklet/telephone call). Compliance (i.e., completion of all recommended screening examinations) and coverage (i.e., completion of at least one screening examination), the primary and secondary outcomes, were measured over 2 years. In the 2 years prior to baseline, 61% of employees had been screened. After random assignment, baseline differences in several employee characteristics and worksite screening procedures were detected, including more past history of screening in control worksites. After adjusting for differences, we found modest, but higher, compliance and coverage in intervention compared with control worksites (odds ratio [95% confidence limits] = 1.46 [1.1-2.0] and 1.33 [1.1, 1.6], respectively). Adding a personally tailored behavioral intervention to a standard colorectal cancer screening program can promote continued employee participation in screening as measured by compliance. Further research is needed to assess intervention effects in other populations. Copyright 1999 American Health Foundation and Academic Press.

A bill to provide for the award of a gold medal on behalf of Congress to Jack Nicklaus, in recognition of his service to the Nation in promoting excellence, good sportsmanship, and philanthropy.

THOMAS, 112th Congress

Sen. Portman, Rob [R-OH

2012-05-24

Senate - 05/24/2012 Read twice and referred to the Committee on Banking, Housing, and Urban Affairs. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

A bill to direct the Secretary of Education to establish and administer an awards program recognizing excellence exhibited by public school system employees providing services to students in pre-kindergarten through higher education.

THOMAS, 111th Congress

Sen. Murray, Patty [D-WA

2010-07-26

Senate - 07/26/2010 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Communications--The Next Step. P.R.I.D.E. People Retraining for Industry Excellence.

ERIC Educational Resources Information Center

Pollak, Ave

This workplace skills course on communication is designed to build on the communications strategies at work course. The focus of the course is the importance of team building, reaching consensus, and conflict resolution as part of the communication process. Introductory material includes a course outline and course topics. The course consists of…

Transforming Leaders into Stewards of Teaching Excellence: Building and Sustaining an Academic Culture through Leadership Immersion

ERIC Educational Resources Information Center

Phillips, Candice; Bassell, Kellie; Fillmore, Laura; Stephenson, Winsome

2018-01-01

Nursing must transform education and practice to meet the changing healthcare environment; yet, steps to desired change remain unknown. Academic leaders are well-positioned to initiate change and transform the academic landscape. However, many advance to leadership positions with minimal orientation to the role. Moreover, leaders in academic…

Effective Educational Practice: A Crucial First Step in Addressing the Needs of Traditionally Overlooked Students

ERIC Educational Resources Information Center

Dimeo, Jennifer Kumpost

2013-01-01

Students who are traditionally overlooked in academic settings (e.g. poor, Black, Hispanic American, Latino/Latina) are not likely to have educational experiences that reflect equity in access to excellence in education. These students regularly encounter challenges that reflect a poor educational fit and their key needs are often overlooked in…

America Creating Opportunities to Meaningfully Promote Excellence in Technology, Education, and Science Reauthorization Act of 2010

THOMAS, 111th Congress

Sen. Rockefeller, John D., IV [D-WV

2010-07-15

Senate - 12/10/2010 Placed on Senate Legislative Calendar under General Orders. Calendar No. 687. (All Actions) Notes: For further action, see H.R.5116, which became Public Law 111-358 on 1/4/2011. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Morris K. Udall Scholarship and Excellence in National Environmental Policy Amendments Act of 2009

THOMAS, 111th Congress

Sen. Bingaman, Jeff [D-NM

2009-02-12

Senate - 02/12/2009 Read twice and referred to the Committee on Environment and Public Works. (All Actions) Notes: For further action, see S.1818, which became Public Law 111-90 on 11/3/2009. Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:

Biscalix[4]arene derivative as a very efficient phase selective gelator for oil spill recovery.

PubMed

Tsai, Chia-Chen; Cheng, Ying-Tsai; Shen, Li-Ching; Chang, Kai-Chi; Ho, I-Ting; Chu, Jean-Ho; Chung, Wen-Sheng

2013-11-15

A biscalixarene framework, without long alkyl chains, has been readily synthesized in three steps starting from the parent calix[4]arene. The biscalix[4]arene 1 was able to form organogels in various alcoholic solvents; furthermore, it exhibited an excellent phase selective gelation property that is potentially useful in oil spill recovery.

Closing the Gaps: 2015. The Texas Higher Education Plan

ERIC Educational Resources Information Center

Texas Higher Education Coordinating Board, 2015

2015-01-01

Texas is profiting from a diverse, vibrant and growing economy. Yet this prosperity could turn to crisis if steps are not taken quickly to ensure an educated population and workforce for the future. At present, the proportion of Texans enrolled in higher education is declining. Too few higher education programs are noted for excellence and too few…

Students with Disabilities & Educational Standards: Recommendations for Policy & Practice.

ERIC Educational Resources Information Center

Ysseldyke, James E.; And Others

1994-01-01

By setting academic standards, America takes its first critical step toward providing a plan that will create an excellent educational system for the 21st century. It is important for those working on standards and those educating students with disabilities to work together as standards are being developed. Four kinds of standards need to be…

Reviews of Selected Books and Articles on Gaming and Simulation.

ERIC Educational Resources Information Center

Shubik, Martin; Brewer, Garry D.

This annotated bibliography represents the initial step taken by the authors to apply standards of excellence to the evaluation of literature in the fields of gaming, simulation, and model-building. It aims at helping persons interested in these subjects deal with the flood of literature on these topics by making value judgments, based on the…

Kick, Glide, Pole! Cross-Country Skiing Fun (Part I)

ERIC Educational Resources Information Center

Duoos, Bridget A.

2011-01-01

Cross-country skiing is a great activity for taking a physical education class outside during the cold winter months. It is also a diverse activity that appeals to students of all ages, and is an excellent cardio-respiratory activity to keep students active. This article has provided the first steps in preparing a cross-country skiing lesson in…

Integrated Services: Key to Academic Success. coNCepts. Issue 1, Winter 2008

ERIC Educational Resources Information Center

White, April D., Ed.

2008-01-01

In order to be competitive in today's world, it is necessary for North Carolina to have a well-educated workforce. Quality schools, including effective leadership, excellent teachers, and improved academic standards and rigor, are a significant factor in these endeavors. However, good schooling starts well before a student ever steps foot into a…

A Field-Tested Task Analysis for Creating Single-Subject Graphs Using Microsoft[R] Office Excel

ERIC Educational Resources Information Center

Lo, Ya-yu; Konrad, Moira

2007-01-01

Creating single-subject (SS) graphs is challenging for many researchers and practitioners because it is a complex task with many steps. Although several authors have introduced guidelines for creating SS graphs, many users continue to experience frustration. The purpose of this article is to minimize these frustrations by providing a field-tested…

Interest of HYPR flow dynamic MRA for characterization of cerebral arteriovenous malformations: comparison with TRICKS MRA and catheter DSA.

PubMed

Dautry, Raphaël; Edjlali, Myriam; Roca, Pauline; Rabrait, Cécile; Wu, Yijing; Johnson, Kevin; Wieben, Olivier; Trystram, Denis; Rodriguez-Régent, Christine; Alshareef, Fawaz; Turski, Patrick; Meder, Jean-François; Naggara, Olivier; Oppenheim, Catherine

2015-11-01

HYPR flow is a 3D dynamic contrast-enhanced MRA technique providing isotropic sub-millimetre resolution with half-second temporal resolution. We compared HYPR flow and time-resolved imaging of contrast kinetics (TRICKS) MRA for the characterization of cerebral arteriovenous malformations (cAVMs), using catheter DSA as reference. Twenty-two patients underwent HYPR flow and TRICKS MRA within 15 days of DSA. HYPR flow and TRICKS datasets were reviewed separately by two readers for image quality, Spetzler-Martin grade, venous ectasia, and deep venous drainage. Image quality was better for HYPR flow than for TRICKS (narrower full width at half maximum; larger arterial diagnostic window; greater number of arterial frames, P ≤ 0.05). Using HYPR flow, inter-reader agreement was excellent for all cAVM characteristics. The agreement with DSA for the overall Spetzler-Martin grade was excellent for HYPR flow (ICC = 0.96 and 0.98, depending on the reader) and TRICKS (ICC = 0.82 and 0.95). In comparison to TRICKS, HYPR flow showed higher concordance with DSA for the identification of venous ectasia and deep venous drainage. Owing to an excellent agreement with DSA with respect to depiction of the vascular architecture of cAVMs, HYPR flow could be useful for the non-invasive characterization of cAVMs. • Dynamic MRA is used for cerebral AVM depiction and follow-up • HYPR flow is a new, highly-resolved dynamic MRA sequence • HYPR flow provides whole brain coverage • HYPR flow provides excellent agreement with the Spetzler-Martin grade • Compared to TRICKS MRA, HYPR flow improves cerebral AVM characterization.

Family Planning in the Context of Latin America's Universal Health Coverage Agenda.

PubMed

Fagan, Thomas; Dutta, Arin; Rosen, James; Olivetti, Agathe; Klein, Kate

2017-09-27

Countries in Latin America and the Caribbean (LAC) have substantially improved access to family planning over the past 50 years. Many have also recently adopted explicit declarations of universal rights to health and universal health coverage (UHC) and have begun implementing UHC-oriented health financing schemes. These schemes will have important implications for the sustainability and further growth of family planning programs throughout the region. We examined the status of contraceptive methods in major health delivery and financing schemes in 9 LAC countries. Using a set of 37 indicators on family planning coverage, family planning financing, health financing, and family planning inclusion in UHC-oriented schemes, we conducted a desk review of secondary sources, including population surveys, health financing assessments, insurance enrollment reports, and unit cost estimates, and interviewed in-country experts. Findings: Although the modern contraceptive prevalence rate (mCPR) has continued to increase in the majority of LAC countries, substantial disparities in access for marginalized groups remain. On average, mCPR is 20% lower among indigenous women than the general population, 5% lower among uninsured women than insured, and 7% lower among the poorest women than the wealthiest. Among the poorest quintile of women, insured women had an mCPR 16.5 percentage points higher than that of uninsured women, suggesting that expansion of insurance coverage is associated with increased family planning access and use. In the high- and upper-middle-income countries we reviewed, all modern contraceptive methods are typically available through the social health insurance schemes that cover a majority of the population. However, in low- and lower-middle-income countries, despite free provision of most family planning services in public health facilities, stock-outs and implicit rationing present substantial barriers that prevent clients from accessing their preferred method or force them to pay out of pocket. Leveraging UHC-oriented schemes to sustain and further increase family planning progress will require that governments take deliberate steps to (1) target poor and informal sector populations, (2) include family planning in benefits packages, (3) ensure sufficient financing for family planning, and (4) reduce nonfinancial barriers to access. Through these steps, countries can increase financial protection for family planning and better ensure the right to health of poor and marginalized populations. © Fagan et al.

Family Planning in the Context of Latin America's Universal Health Coverage Agenda

PubMed Central

Fagan, Thomas; Dutta, Arin; Rosen, James; Olivetti, Agathe; Klein, Kate

2017-01-01

ABSTRACT Background: Countries in Latin America and the Caribbean (LAC) have substantially improved access to family planning over the past 50 years. Many have also recently adopted explicit declarations of universal rights to health and universal health coverage (UHC) and have begun implementing UHC-oriented health financing schemes. These schemes will have important implications for the sustainability and further growth of family planning programs throughout the region. Methods: We examined the status of contraceptive methods in major health delivery and financing schemes in 9 LAC countries. Using a set of 37 indicators on family planning coverage, family planning financing, health financing, and family planning inclusion in UHC-oriented schemes, we conducted a desk review of secondary sources, including population surveys, health financing assessments, insurance enrollment reports, and unit cost estimates, and interviewed in-country experts. Findings: Although the modern contraceptive prevalence rate (mCPR) has continued to increase in the majority of LAC countries, substantial disparities in access for marginalized groups remain. On average, mCPR is 20% lower among indigenous women than the general population, 5% lower among uninsured women than insured, and 7% lower among the poorest women than the wealthiest. Among the poorest quintile of women, insured women had an mCPR 16.5 percentage points higher than that of uninsured women, suggesting that expansion of insurance coverage is associated with increased family planning access and use. In the high- and upper-middle-income countries we reviewed, all modern contraceptive methods are typically available through the social health insurance schemes that cover a majority of the population. However, in low- and lower-middle-income countries, despite free provision of most family planning services in public health facilities, stock-outs and implicit rationing present substantial barriers that prevent clients from accessing their preferred method or force them to pay out of pocket. Conclusion: Leveraging UHC-oriented schemes to sustain and further increase family planning progress will require that governments take deliberate steps to (1) target poor and informal sector populations, (2) include family planning in benefits packages, (3) ensure sufficient financing for family planning, and (4) reduce nonfinancial barriers to access. Through these steps, countries can increase financial protection for family planning and better ensure the right to health of poor and marginalized populations. PMID:28765156

REAL-PANLAR Project for the Implementation and Accreditation of Centers of Excellence in Rheumatoid Arthritis Throughout Latin America: A Consensus Position Paper From REAL-PANLAR Group on Improvement of Rheumatoid Arthritis Care in Latin America Establishing Centers of Excellence.

PubMed

Santos-Moreno, Pedro; Galarza-Maldonado, Claudio; Caballero-Uribe, Carlo V; Cardiel, Mario H; Massardo, Loreto; Soriano, Enrique R; Olano, José Aguilar; Díaz Coto, José F; Durán Pozo, Gabriel R; da Silveira, Inês Guimarães; de Castrejón, Vianna J Khoury; Pérez, Leticia Lino; Méndez Justo, Carlos A; Montufar Guardado, Rubén A; Muños, Rafael; Elvir, Sergio Murillo; Paredes Domínguez, Ernesto R; Pons-Estel, Bernardo; Ríos Acosta, Carlos R; Sandino, Sayonara; Toro Gutiérrez, Carlos E; Villegas de Morales, Sol María; Pineda, Carlos

2015-06-01

A consensus meeting of representatives of 16 Latin American and Caribbean countries and the REAL-PANLAR group met in the city of Bogota to provide recommendations for improving quality of care of patients with rheumatoid arthritis (RA) in Latin America, defining a minimum standards of care and the concept of center of excellence in RA. Twenty-two rheumatologists from 16 Latin American countries with a special interest in quality of care in RA participated in the consensus meeting. Two RA Colombian patients and 2 health care excellence advisors were also invited to the meeting. A RAND-modified Delphi procedure of 5 steps was applied to define categories of centers of excellence. During a 1-day meeting, working groups were created in order to discuss and validate the minimum quality-of-care standards for the 3 proposed types of centers of excellence in RA. Positive votes from at least 60% of the attending leaders were required for the approval of each standard. Twenty-two opinion leaders from the PANLAR countries and the REAL-PANLAR group participated in the discussion and definition of the standards. One hundred percent of the participants agreed with setting up centers of excellence in RA throughout Latin America. Three types of centers of excellence and its criteria were defined, according to indicators of structure, processes, and outcomes: standard, optimal, and model. The standard level should have basic structure and process indicators, the intermediate or optimal level should accomplish more structure and process indicators, and model level should also fulfill outcome indicators and patient experience. This is the first Latin American effort to standardize and harmonize the treatment provided to RA patients and to establish centers of excellence that would offer to RA patients acceptable clinical results and high levels of safety.

Mechanical, thermal and morphological characterization of polycarbonate/oxidized carbon nanofiber composites produced with a lean 2-step manufacturing process.

PubMed

Lively, Brooks; Kumar, Sandeep; Tian, Liu; Li, Bin; Zhong, Wei-Hong

2011-05-01

In this study we report the advantages of a 2-step method that incorporates an additional process pre-conditioning step for rapid and precise blending of the constituents prior to the commonly used melt compounding method for preparing polycarbonate/oxidized carbon nanofiber composites. This additional step (equivalent to a manufacturing cell) involves the formation of a highly concentrated solid nano-nectar of polycarbonate/carbon nanofiber composite using a solution mixing process followed by melt mixing with pure polycarbonate. This combined method yields excellent dispersion and improved mechanical and thermal properties as compared to the 1-step melt mixing method. The test results indicated that inclusion of carbon nanofibers into composites via the 2-step method resulted in dramatically reduced ( 48% lower) coefficient of thermal expansion compared to that of pure polycarbonate and 30% lower than that from the 1-step processing, at the same loading of 1.0 wt%. Improvements were also found in dynamic mechanical analysis and flexural mechanical properties. The 2-step approach is more precise and leads to better dispersion, higher quality, consistency, and improved performance in critical application areas. It is also consistent with Lean Manufacturing principles in which manufacturing cells are linked together using less of the key resources and creates a smoother production flow. Therefore, this 2-step process can be more attractive for industry.

Application of CUSA Excel ultrasonic aspiration system in resection of skull base meningiomas.

PubMed

Tang, Hailiang; Zhang, Haishi; Xie, Qing; Gong, Ye; Zheng, Mingzhe; Wang, Daijun; Zhu, Hongda; Chen, Xiancheng; Zhou, Liangfu

2014-12-01

Here, we introduced our short experience on the application of a new CUSA Excel ultrasonic aspiration system, which was provided by Integra Lifesciences corporation, in skull base meningiomas resection. Ten patients with anterior, middle skull base and sphenoid ridge meningioma were operated using the CUSA Excel ultrasonic aspiration system at the Neurosurgery Department of Shanghai Huashan Hospital from August 2014 to October 2014. There were six male and four female patients, aged from 38 to 61 years old (the mean age was 48.5 years old). Five cases with tumor located at anterior skull base, three cases with tumor on middle skull base, and two cases with tumor on sphenoid ridge. All the patents received total resection of meningiomas with the help of this new tool, and the critical brain vessels and nerves were preserved during operations. All the patients recovered well after operation. This new CUSA Excel ultrasonic aspiration system has the advantage of preserving vital brain arteries and cranial nerves during skull base meningioma resection, which is very important for skull base tumor operations. This key step would ensure a well prognosis for patients. We hope the neurosurgeons would benefit from this kind of technique.

Geomorphic analyses from space imagery

NASA Technical Reports Server (NTRS)

Morisawa, M.

1985-01-01

One of the most obvious applications of space imagery to geomorphological analyses is in the study of drainage patterns and channel networks. LANDSAT, high altitude photography and other types of remote sensing imagery are excellent for depicting stream networks on a regional scale because of their broad coverage in a single image. They offer a valuable tool for comparing and analyzing drainage patterns and channel networks all over the world. Three aspects considered in this geomorphological study are: (1) the origin, evolution and rates of development of drainage systems; (2) the topological studies of network and channel arrangements; and (3) the adjustment of streams to tectonic events and geologic structure (i.e., the mode and rate of adjustment).

The Challenges of Low-Frequency Radio Polarimetry: Lessons from the Murchison Widefield Array

NASA Astrophysics Data System (ADS)

Lenc, E.; Anderson, C. S.; Barry, N.; Bowman, J. D.; Cairns, I. H.; Farnes, J. S.; Gaensler, B. M.; Heald, G.; Johnston-Hollitt, M.; Kaplan, D. L.; Lynch, C. R.; McCauley, P. I.; Mitchell, D. A.; Morgan, J.; Morales, M. F.; Murphy, Tara; Offringa, A. R.; Ord, S. M.; Pindor, B.; Riseley, C.; Sadler, E. M.; Sobey, C.; Sokolowski, M.; Sullivan, I. S.; O'Sullivan, S. P.; Sun, X. H.; Tremblay, S. E.; Trott, C. M.; Wayth, R. B.

2017-09-01

We present techniques developed to calibrate and correct Murchison Widefield Array low-frequency (72-300 MHz) radio observations for polarimetry. The extremely wide field-of-view, excellent instantaneous (u, v)-coverage and sensitivity to degree-scale structure that the Murchison Widefield Array provides enable instrumental calibration, removal of instrumental artefacts, and correction for ionospheric Faraday rotation through imaging techniques. With the demonstrated polarimetric capabilities of the Murchison Widefield Array, we discuss future directions for polarimetric science at low frequencies to answer outstanding questions relating to polarised source counts, source depolarisation, pulsar science, low-mass stars, exoplanets, the nature of the interstellar and intergalactic media, and the solar environment.

Atomic layer deposition of a high-k dielectric on MoS2 using trimethylaluminum and ozone.

PubMed

Cheng, Lanxia; Qin, Xiaoye; Lucero, Antonio T; Azcatl, Angelica; Huang, Jie; Wallace, Robert M; Cho, Kyeongjae; Kim, Jiyoung

2014-08-13

We present an Al2O3 dielectric layer on molybdenum disulfide (MoS2), deposited using atomic layer deposition (ALD) with ozone/trimethylaluminum (TMA) and water/TMA as precursors. The results of atomic force microscopy and low-energy ion scattering spectroscopy show that using TMA and ozone as precursors leads to the formation of uniform Al2O3 layers, in contrast to the incomplete coverage we observe when using TMA/H2O as precursors. Our Raman and X-ray photoelectron spectroscopy measurements indicate minimal variations in the MoS2 structure after ozone treatment at 200 °C, suggesting its excellent chemical resistance to ozone.

Comforts of Home: Home Care of the Terminally Ill

PubMed Central

Fraser, Jacqueline

1990-01-01

When a terminal illness is diagnosed, it is appropriate for the family physician to take a primary role in future management. Care goals change from being disease-focused and cure-directed to being person-focused and comfort-targeted. The patient and family comprise the unit of care. Care of the terminally ill in the home requires good planning, teamwork, excellent symptom management, and a commitment by the family physician to be available or provide alternate coverage. Death in the home should be an option for the patient and family whenever feasible. Caring for patients until death and supporting their families and friends are rewarding and positive parts of family practice. PMID:21233972

Vacuum Ultraviolet Photodissociation and Fourier Transform–Ion Cyclotron Resonance (FT-ICR) Mass Spectrometry: Revisited

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shaw, Jared B.; Robinson, Errol W.; Pasa-Tolic, Ljiljana

2016-02-16

We revisited the implementation of UVPD within the ICR cell of a FT-ICR mass spectrometer. UVPD performance characteristics were examined in the context of recent developments in the understanding of UVPD and in-cell tandem mass spectrometry. Efficient UVPD and photo-ECD of a model peptide and small protein within the ICR cell of a FT-ICR mass spectrometer are accomplished through appropriate modulation of laser pulse timing relative to ion magnetron motion and the potential applied to an ion optical element that photons impinge on. It is shown that UVPD yields efficient and extensive fragmentation resulting in excellent sequence coverage for modelmore » peptide and protein cations.« less

Entomological Monitoring and Evaluation: Diverse Transmission Settings of ICEMR Projects Will Require Local and Regional Malaria Elimination Strategies

PubMed Central

Conn, Jan E.; Norris, Douglas E.; Donnelly, Martin J.; Beebe, Nigel W.; Burkot, Thomas R.; Coulibaly, Mamadou B.; Chery, Laura; Eapen, Alex; Keven, John B.; Kilama, Maxwell; Kumar, Ashwani; Lindsay, Steve W.; Moreno, Marta; Quinones, Martha; Reimer, Lisa J.; Russell, Tanya L.; Smith, David L.; Thomas, Matthew B.; Walker, Edward D.; Wilson, Mark L.; Yan, Guiyun

2015-01-01

The unprecedented global efforts for malaria elimination in the past decade have resulted in altered vectorial systems, vector behaviors, and bionomics. These changes combined with increasingly evident heterogeneities in malaria transmission require innovative vector control strategies in addition to the established practices of long-lasting insecticidal nets and indoor residual spraying. Integrated vector management will require focal and tailored vector control to achieve malaria elimination. This switch of emphasis from universal coverage to universal coverage plus additional interventions will be reliant on improved entomological monitoring and evaluation. In 2010, the National Institutes for Allergies and Infectious Diseases (NIAID) established a network of malaria research centers termed ICEMRs (International Centers for Excellence in Malaria Research) expressly to develop this evidence base in diverse malaria endemic settings. In this article, we contrast the differing ecology and transmission settings across the ICEMR study locations. In South America, Africa, and Asia, vector biologists are already dealing with many of the issues of pushing to elimination such as highly focal transmission, proportionate increase in the importance of outdoor and crepuscular biting, vector species complexity, and “sub patent” vector transmission. PMID:26259942

Entomological Monitoring and Evaluation: Diverse Transmission Settings of ICEMR Projects Will Require Local and Regional Malaria Elimination Strategies.

PubMed

Conn, Jan E; Norris, Douglas E; Donnelly, Martin J; Beebe, Nigel W; Burkot, Thomas R; Coulibaly, Mamadou B; Chery, Laura; Eapen, Alex; Keven, John B; Kilama, Maxwell; Kumar, Ashwani; Lindsay, Steve W; Moreno, Marta; Quinones, Martha; Reimer, Lisa J; Russell, Tanya L; Smith, David L; Thomas, Matthew B; Walker, Edward D; Wilson, Mark L; Yan, Guiyun

2015-09-01

The unprecedented global efforts for malaria elimination in the past decade have resulted in altered vectorial systems, vector behaviors, and bionomics. These changes combined with increasingly evident heterogeneities in malaria transmission require innovative vector control strategies in addition to the established practices of long-lasting insecticidal nets and indoor residual spraying. Integrated vector management will require focal and tailored vector control to achieve malaria elimination. This switch of emphasis from universal coverage to universal coverage plus additional interventions will be reliant on improved entomological monitoring and evaluation. In 2010, the National Institutes for Allergies and Infectious Diseases (NIAID) established a network of malaria research centers termed ICEMRs (International Centers for Excellence in Malaria Research) expressly to develop this evidence base in diverse malaria endemic settings. In this article, we contrast the differing ecology and transmission settings across the ICEMR study locations. In South America, Africa, and Asia, vector biologists are already dealing with many of the issues of pushing to elimination such as highly focal transmission, proportionate increase in the importance of outdoor and crepuscular biting, vector species complexity, and "sub patent" vector transmission. © The American Society of Tropical Medicine and Hygiene.

Management of facial burns with a collagen/glycosaminoglycan skin substitute-prospective experience with 12 consecutive patients with large, deep facial burns.

PubMed

Klein, Matthew B; Engrav, Loren H; Holmes, James H; Friedrich, Jeffrey B; Costa, Beth A; Honari, Shari; Gibran, Nicole S

2005-05-01

Management of deep facial burns remains one of the greatest challenges in burn care. We have developed a protocol over the past 20 years for management of facial burns that includes excision and coverage with thick autograft. However, the results were not perfect. Deformities of the eyelids, nose and mouth as well as the prominence of skin graft junctures demonstrated the need to explore novel approaches. Integra has been used with success in the management of burns of the trunk and extremities. The purpose of this study was to prospectively evaluate the aesthetic outcome of the use of Integra for deep facial burns. Twelve consecutive patients underwent excision of large, deep facial burns and placement of Integra. Integra provides excellent color and minimally visible skin graft junctures. The texture is good but not as supple as thick autograft. Integra is not well suited for use in the coverage of eyelid burns due to the need to wait 2 weeks for adequate vascularization. In summary, thick autograft remains the gold standard for deep facial burns. However, for patients with extensive burns and limited donor sites, Integra provides an acceptable alternative.

Mapping the literature of medical-surgical nursing.

PubMed

Taylor, Mary K

2006-04-01

Medical-surgical or adult health nursing is a complex specialty that requires a wide-ranging literature to inform its research and practice. Several excellent qualitative aids exist for collection development for this field, but quantitative studies are few. While one bibliometric study of journals exists, no recent work had been done in this area. The Mapping the Literature of Nursing Project protocol was used. Four source journals were selected, and a citation analysis of articles from 1996 to 1998 was conducted. A list of the most frequently cited journals was created, using Bradford's Law of Scattering. The list demonstrates that 1.2% of the cited medical-surgical nursing journals produced just over 33% of the citations. PubMed/MEDLINE, CINAHL, and Science Citation Index provided the most complete indexing coverage of all of the journals, with CINAHL providing the most complete coverage of nursing journals. Books were the second-most cited format. Citation analysis of journal articles is a useful aid for selecting journals for medical-surgical nursing collections, but it did not prove to be as useful for selecting materials in other formats. Indexes in addition to PubMed/MEDLINE are necessary to provide access to the journal literature serving this specialty.

Natural printed silk substrate circuit fabricated via surface modification using one step thermal transfer and reduction graphene oxide

NASA Astrophysics Data System (ADS)

Cao, Jiliang; Huang, Zhan; Wang, Chaoxia

2018-05-01

Graphene conductive silk substrate is a preferred material because of its biocompatibility, flexibility and comfort. A flexible natural printed silk substrate circuit was fabricated by one step transfer of graphene oxide (GO) paste from transfer paper to the surface of silk fabric and reduction of the GO to reduced graphene oxide (RGO) using a simple hot press treatment. The GO paste was obtained through ultrasonic stirring exfoliation under low temperature, and presented excellent printing rheological properties at high concentration. The silk fabric was obtained a surface electric resistance as low as 12.15 KΩ cm-1, in the concentration of GO 50 g L-1 and hot press at 220 °C for 120 s. Though the whiteness and strength decreased with the increasing of hot press temperature and time slowly, the electric conductivity of RGO surface modification silk substrate improved obviously. The surface electric resistance of RGO/silk fabrics increased from 12.15 KΩ cm-1 to 18.05 KΩ cm-1, 28.54 KΩ cm-1 and 32.53 KΩ cm-1 after 10, 20 and 30 washing cycles, respectively. The results showed that the printed silk substrate circuit has excellent washability. This process requires no chemical reductant, and the reduction efficiency and reduction degree of GO is high. This time-effective and environmentally-friendly one step thermal transfer and reduction graphene oxide onto natural silk substrate method can be easily used to production of reduced graphene oxide (RGO) based flexible printed circuit.

One-step synthesis of hydrothermally stable mesoporous aluminosilicates with strong acidity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang Dongjiang; School of Physical and Chemical Sciences, Queensland University of Technology, Brisbane, QLD 4001; Xu Yao

2008-09-15

Using tetraethylorthosilicate (TEOS), polymethylhydrosiloxane (PMHS) and aluminium isopropoxide (AIP) as the reactants, through a one-step nonsurfactant route based on PMHS-TEOS-AIP co-polycondensation, hydrothermally stable mesoporous aluminosilicates with different Si/Al molar ratios were successfully prepared. All samples exclusively showed narrow pore size distribution centered at 3.6 nm. To assess the hydrothermal stability, samples were subjected to 100 deg. C distilled water for 300 h. The boiled mesoporous aluminosilicates have nearly the same N{sub 2} adsorption-desorption isotherms and the same pore size distributions as those newly synthesized ones, indicating excellent hydrothermal stability. The {sup 29}Si MAS NMR spectra confirmed that PMHS and TEOSmore » have jointly condensed and CH{sub 3} groups have been introduced into the materials. The {sup 27}Al MAS NMR spectra indicated that Al atoms have been incorporated in the mesopore frameworks. The NH{sub 3} temperature-programmed desorption showed strong acidity. Due to the existence of large amount of CH{sub 3} groups, the mesoporous aluminosilicates obtained good hydrophobicity. Owing to the relatively large pore and the strong acidity provided by the uniform four-coordinated Al atoms, the excellent catalytic performance for 1,3,5-triisopropylbenzene cracking was acquired easily. The materials may be a profitable complement for the synthesis of solid acid catalysts. - Graphical abstract: Based on the nonsurfactant method, a facile one-step synthesis route has been developed to prepare methyl-modified mesoporous aluminosilicates that possessed hydrothermal stability and strong acidity.« less

One-step Maskless Fabrication and Optical Characterization of Silicon Surfaces with Antireflective Properties and a White Color Appearance

PubMed Central

Schneider, Ling; Feidenhans’l, Nikolaj A.; Telecka, Agnieszka; Taboryski, Rafael J.

2016-01-01

We report a simple one-step maskless fabrication of inverted pyramids on silicon wafers by reactive ion etching. The fabricated surface structures exhibit excellent anti-reflective properties: The total reflectance of the nano inverted pyramids fabricated by our method can be as low as 12% without any anti-reflective layers, and down to only 0.33% with a silicon nitride coating. The results from angle resolved scattering measurements indicate that the existence of triple reflections is responsible for the reduced reflectance. The surfaces with the nano inverted pyramids also exhibit a distinct milky white color. PMID:27725703

User Instructions for the Policy Analysis Modeling System (PAMS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

McNeil, Michael A.; Letschert, Virginie E.; Van Buskirk, Robert D.

PAMS uses country-specific and product-specific data to calculate estimates of impacts of a Minimum Efficiency Performance Standard (MEPS) program. The analysis tool is self-contained in a Microsoft Excel spreadsheet, and requires no links to external data, or special code additions to run. The analysis can be customized to a particular program without additional user input, through the use of the pull-down menus located on the Summary page. In addition, the spreadsheet contains many areas into which user-generated input data can be entered for increased accuracy of projection. The following is a step-by-step guide for using and customizing the tool.

USING MICROSOFT OFFICE EXCEL® 2007 TO CONDUCT GENERALIZED MATCHING ANALYSES

PubMed Central

Reed, Derek D

2009-01-01

The generalized matching equation is a robust and empirically supported means of analyzing relations between reinforcement and behavior. Unfortunately, no simple task analysis is available to behavior analysts interested in using the matching equation to evaluate data in clinical or applied settings. This technical article presents a task analysis for the use of Microsoft Excel to analyze and plot the generalized matching equation. Using a data-based case example and a step-by-step guide for completing the analysis, these instructions are intended to promote the use of quantitative analyses by researchers with little to no experience in quantitative analyses or the matching law. PMID:20514196

Farm-related injury event, social consequences and injury reporting in the Land Lantbruk newspaper in Sweden: a retrospective study of farm-related injury reporting during 2000-2005.

PubMed

Lundälv, Jörgen

2006-12-01

The aim of the present study was to detect how a leading news paper, the Land Lantbruk in Stockholm, Sweden, informs the public and specifically the rural sector in Sweden and the Scandinavian countries concerning injury events (farm-related injury event) and the use of injury prevention and control. Injury reporting in the Land Lantbruk has been studied from the point of injury prevention and control. A study of injury prevention and rural health and safety in Australia shows that the newspaper The Land that serves Australia's rural community should 'be an under-utilised vehicle for news and commentary on rural health and safety issues'. The study period was from January 2000 to February 2005. A total of 178 articles were reviewed and analysed. The articles were available on a newspaper database in the Land Lantbruk newspaper. Articles that addressed farm-related injury event and rural health and safety were chosen and organised into subgroups. Tractor and motor vehicle safety (35%) was most common among the injury reporting. Although the newspaper Land Lantbruk provided excellent coverage of the causes of these events, the reports tended to focus on circumstances and did not provide information on injury prevention or the advantages of also coverage of the social and psychosocial long-term consequences of accidents. In the prevention work of reducing farm-related injuries in the rural sector in the Scandinavian countries and decreasing the human suffering represented by this health problem, rural politicians, insurance companies, rural authorities and also handicap organisations should listen more to the injured individuals and their own experiences relative to the difficulty of life after an accident. The reaction of family and relatives, and experiences of the long-term social consequences, have not been included in the media coverage. Journalists at the Land Lantbruk could also share experiences of the Swedish coverage of rural health and safety from Australian journalists from The Land.

Adsorption isotherms of water on mica: redistribution and film growth.

PubMed

Malani, Ateeque; Ayappa, K G

2009-01-29

Adsorption isotherms of water on muscovite mica are obtained using grand canonical Monte Carlo simulations over a wide range of relative vapor pressures, p/p(0) at 298 K. Three distinct stages are observed in the adsorption isotherm. A sharp rise in the water coverage occurs for 0 < p/p(0) < 0.1. This is followed by a relatively slow increase in the coverage for 0.1 < or = p/p(0) < or = 0.7. Above p/p(0) = 0.7, a second increase in the coverage occurs due to the adsorption of water with bulklike features. The derived film thickness and isotherm shape for the simple point charge (SPC) water model is in excellent agreement with recent experiments of Balmer et al. [ Langmuir 2008 , 24 , 1566 ]. A novel observation is the significant redistribution of water between adsorbed layers as the water film develops. This redistribution is most pronounced for 0.1 < or = p/p(0) < or = 0.7, where water is depleted from the inner layers and film growth is initiated on the outer layer. During this stage, potassium hydration is found to play a dominant role in the rearrangement of water near the mica surface. The analysis of structural features reveals a strongly bound first layer of water molecules occupying the ditrigonal cavities between the potassium ions. In-plane structure of oxygen in the second layer, which forms part of the first hydration shell of potassium, reveals a liquidlike structure with the oxygen-oxygen pair correlation function displaying features similar to bulk water. Isosteric heats of adsorption were found to be in good agreement with the differential microcalorimetric data of Rakhmatkariev ( Clays Clay Miner. 2006 , 54 , 402 ), over the entire range of pressures investigated. Both SPC and extended simple point charge (SPC/E) water models were found to yield qualitatively similar adsorption and structural characteristics, with the SPC/E model predicting lower coverages than the SPC model for p/p(0) > 0.7.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bosarge, Christina L., E-mail: cbosarge@umail.iu.edu; Ewing, Marvene M.; DesRosiers, Colleen M.

To demonstrate the dosimetric advantages and disadvantages of standard anteroposterior-posteroanterior (S-AP/PA{sub AAA}), inverse-planned AP/PA (IP-AP/PA) and volumetry-modulated arc (VMAT) radiotherapies in the treatment of children undergoing whole-lung irradiation. Each technique was evaluated by means of target coverage and normal tissue sparing, including data regarding low doses. A historical approach with and without tissue heterogeneity corrections is also demonstrated. Computed tomography (CT) scans of 10 children scanned from the neck to the reproductive organs were used. For each scan, 6 plans were created: (1) S-AP/PA{sub AAA} using the anisotropic analytical algorithm (AAA), (2) IP-AP/PA, (3) VMAT, (4) S-AP/PA{sub NONE} without heterogeneitymore » corrections, (5) S-AP/PA{sub PB} using the Pencil-Beam algorithm and enforcing monitor units from technique 4, and (6) S-AP/PA{sub AAA[FM]} using AAA and forcing fixed monitor units. The first 3 plans compare modern methods and were evaluated based on target coverage and normal tissue sparing. Body maximum and lower body doses (50% and 30%) were also analyzed. Plans 4 to 6 provide a historic view on the progression of heterogeneity algorithms and elucidate what was actually delivered in the past. Averages of each comparison parameter were calculated for all techniques. The S-AP/PA{sub AAA} technique resulted in superior target coverage but had the highest maximum dose to every normal tissue structure. The IP-AP/PA technique provided the lowest dose to the esophagus, stomach, and lower body doses. VMAT excelled at body maximum dose and maximum doses to the heart, spine, and spleen, but resulted in the highest dose in the 30% body range. It was, however, superior to the S-AP/PA{sub AAA} approach in the 50% range. Each approach has strengths and weaknesses thus associated. Techniques may be selected on a case-by-case basis and by physician preference of target coverage vs normal tissue sparing.« less

[The epidemiology of varicella disease in Germany after introduction of a vaccination recommendation : Analysis of mandatory and sentinel data between 2002 and 2014].

PubMed

Hecht, Jane; Siedler, Anette

2017-01-01

Since 2004 a single varicella vaccination for all infants aged 11-14 months has been recommended in Germany and since 2009 a second dose at the age of 15-23 months is recommended. Vaccination coverage after 24 months rose from 43% in 2006 to 87.5% in 2012. A mandatory notification system was introduced in the New Federal States (NFS) between 2002 and 2009 and nationwide in 2013. A national sentinel system has been in place since 2005. We analyzed both data sources to describe the varicella epidemiology related to vaccination coverage after initiation of routine childhood varicella vaccination and to evaluate both notification systems regarding informative value and data quality. We looked at trends, age distribution and incidences using Microsoft Excel and Stata12. Vaccination coverage data were available from health insurance claims data. By 2013 a decrease of cases/medical practice/month from 3.47 to 0.43 was observed. The incidence in the NFS declined from 32 to 12 out of 100,000. Sentinel and mandatory notification data showed the largest decrease among the 1-4 year-olds (-94 and -90% resp.). In 2014, varicella incidences increased in all age groups, but not the cases/medical-practice/month by age in the sentinel. Increasing vaccination coverage and decreasing varicella cases demonstrate the success of routine childhood varicella vaccination. Mandatory notification data allow incidence calculation; The sentinel system has been providing more detailed information about vaccination status, better data quality and continuous national data since 2005, irrespective of the Infectious disease protection act. Trends and age distribution can be continuously calculated, whereas the nationwide mandatory data collected in the short period since April 2013 can only be evaluated to a limited extent.

A Guide to Understanding Security Testing and Test Documentation in Trusted Systems, Version 1

DTIC Science & Technology

1993-07-01

necessary to allow the testing of access with all other types of objects. The above test data also provide partial coverage because they de not include...two types of assurance are needed. They are life-cycle assurance and operational assurance. "Life-cycle assurance refers to steps taken by an...procedures depends to a certain extent on the nature of the TCB interface under test. For example, for most TCB-primitive tests that require the same type

Libration Point Orbit Utilization for Tactical Advantage in Communications, Surveillance, and Risk Mitigation

DTIC Science & Technology

2014-10-27

Ephemeris model in the orbit analysis software Satellite Took Kit ( STK ). As the first step, a study was conducted to find the visibility coverage using...northern L1 and L3 halo orbits. Figure 55. Average visibility by latitude at different ephemeris epochs for an L1 orbiter from STK analysis . Figure...56. Average visibility by latitude at different ephemeris epochs for an L3 orbiter from STK analysis . Figure 57. Average percent visibility of the

Invasive bacterial diseases: national surveillance in Italy and vaccination coverage in the Local Health Agency 4 "Chiavarese", Liguria region (Italy).

PubMed

Trucchi, C; Zoppi, G

2012-06-01

In 2007 in Italy, the National Institute of Health published a new protocol for the National Surveillance of Invasive Bacterial Diseases, in order to enhance the notification system of these diseases and to improve immunization strategies. Available vaccines to prevent these diseases were introduced for the first time into the 1999-2000 National Immunization Plan (NIP) (vaccination against Haemophilus influenzae type b) and the 2005-2007 NIP (vaccination against Streptococcus pneumoniae and Neisseria meningitidis serogroup C). We evaluated the frequency of invasive diseases, on the basis of the number of notifications, the different immunization strategies in the Italian Regions and the vaccination coverage in Local Health Agency 4 "Chiavarese" (LHA) in the Liguria Region (Italy). We evaluated the number of notifications of invasive diseases collected by the national databank coordinated by the ISS (Informative System of Infectious Diseases, SIMI) from 1994 to 2011. We also examined regional regulations concerning immunization policies. Immunization coverage was calculated by means of the "OASIS" software (version 9.0.0) used in our LHA. Available data indicate that the large-scale vaccination policy begun in 1999 in Italy has led to a great reduction in Haemophilus influenzae-related diseases in the pediatric age. Meningococcal diseases have declined to a lesser degree; this is due to the more recent introduction of vaccination against serogroup C (in 2005), the variability of the immunization strategies adopted in the different Italian Regions and the availability of the vaccination against serogroup C only in the pediatric age. The diseases caused by Streptococcus pneumoniae seem to have increased since 2007 because of the implementation of the Surveillance of Invasive Diseases Program and the subsequent notification of all invasive diseases (not only meningitis). Furthermore, the various Italian Regions have adopted different immunization strategies against this disease, too. We evaluated vaccination coverage in LHA 4 from 2003 to 2008. VC levels against Haemophilus influenzae are excellent; the objective indicated in the 2005-2007 NIP (> or = 95%) has therefore been reached. Vaccination coverage levels against Streptococcus pneumoniae and Neisseria meningitidis serogroup C at the 24th month of age are also good. However, we need to implement specific immunization strategies for adolescents, since the vaccination coverage levels are not completely satisfactory. The improvement of the national invasive disease surveillance system has provided better knowledge of the size of the problem and the impact of immunization strategies on the incidence of invasive bacterial diseases. Furthermore, immunization policies in Italy display territorial heterogeneity. Vaccination coverage levels against Haemophilus influenzae, Streptococcus pneumoniae and Neisseria meningitidis at the 24th month in LHA 4 are very high. In adolescents (15 year-olds) the immunization coverage are good but needs to be improved through specific strategies, such as raising the awareness of healthcare workers, involving general practitioners and educating the target population.

Analysis of reaction schemes using maximum rates of constituent steps

PubMed Central

Motagamwala, Ali Hussain; Dumesic, James A.

2016-01-01

We show that the steady-state kinetics of a chemical reaction can be analyzed analytically in terms of proposed reaction schemes composed of series of steps with stoichiometric numbers equal to unity by calculating the maximum rates of the constituent steps, rmax,i, assuming that all of the remaining steps are quasi-equilibrated. Analytical expressions can be derived in terms of rmax,i to calculate degrees of rate control for each step to determine the extent to which each step controls the rate of the overall stoichiometric reaction. The values of rmax,i can be used to predict the rate of the overall stoichiometric reaction, making it possible to estimate the observed reaction kinetics. This approach can be used for catalytic reactions to identify transition states and adsorbed species that are important in controlling catalyst performance, such that detailed calculations using electronic structure calculations (e.g., density functional theory) can be carried out for these species, whereas more approximate methods (e.g., scaling relations) are used for the remaining species. This approach to assess the feasibility of proposed reaction schemes is exact for reaction schemes where the stoichiometric coefficients of the constituent steps are equal to unity and the most abundant adsorbed species are in quasi-equilibrium with the gas phase and can be used in an approximate manner to probe the performance of more general reaction schemes, followed by more detailed analyses using full microkinetic models to determine the surface coverages by adsorbed species and the degrees of rate control of the elementary steps. PMID:27162366

Analysis of reaction schemes using maximum rates of constituent steps

DOE PAGES

Motagamwala, Ali Hussain; Dumesic, James A.

2016-05-09

In this paper, we show that the steady-state kinetics of a chemical reaction can be analyzed analytically in terms of proposed reaction schemes composed of series of steps with stoichiometric numbers equal to unity by calculating the maximum rates of the constituent steps, r max,i, assuming that all of the remaining steps are quasi-equilibrated. Analytical expressions can be derived in terms of r max,i to calculate degrees of rate control for each step to determine the extent to which each step controls the rate of the overall stoichiometric reaction. The values of r max,i can be used to predict themore » rate of the overall stoichiometric reaction, making it possible to estimate the observed reaction kinetics. This approach can be used for catalytic reactions to identify transition states and adsorbed species that are important in controlling catalyst performance, such that detailed calculations using electronic structure calculations (e.g., density functional theory) can be carried out for these species, whereas more approximate methods (e.g., scaling relations) are used for the remaining species. Finally, this approach to assess the feasibility of proposed reaction schemes is exact for reaction schemes where the stoichiometric coefficients of the constituent steps are equal to unity and the most abundant adsorbed species are in quasi-equilibrium with the gas phase and can be used in an approximate manner to probe the performance of more general reaction schemes, followed by more detailed analyses using full microkinetic models to determine the surface coverages by adsorbed species and the degrees of rate control of the elementary steps.« less

Analysis of quality raw data of second generation sequencers with Quality Assessment Software.

PubMed

Ramos, Rommel Tj; Carneiro, Adriana R; Baumbach, Jan; Azevedo, Vasco; Schneider, Maria Pc; Silva, Artur

2011-04-18

Second generation technologies have advantages over Sanger; however, they have resulted in new challenges for the genome construction process, especially because of the small size of the reads, despite the high degree of coverage. Independent of the program chosen for the construction process, DNA sequences are superimposed, based on identity, to extend the reads, generating contigs; mismatches indicate a lack of homology and are not included. This process improves our confidence in the sequences that are generated. We developed Quality Assessment Software, with which one can review graphs showing the distribution of quality values from the sequencing reads. This software allow us to adopt more stringent quality standards for sequence data, based on quality-graph analysis and estimated coverage after applying the quality filter, providing acceptable sequence coverage for genome construction from short reads. Quality filtering is a fundamental step in the process of constructing genomes, as it reduces the frequency of incorrect alignments that are caused by measuring errors, which can occur during the construction process due to the size of the reads, provoking misassemblies. Application of quality filters to sequence data, using the software Quality Assessment, along with graphing analyses, provided greater precision in the definition of cutoff parameters, which increased the accuracy of genome construction.

Supramolecular structures of halogenated oligothiophenes on the Si(111)-√3 ×√3-Ag surface

NASA Astrophysics Data System (ADS)

Liu, R.; Fu, C.; Perepichka, D. F.; Gallagher, M. C.

2016-05-01

We have studied the adsorption of brominated tetrathienoanthracene (TBTTA) molecules onto the Si(111)-√3 × √ 3-Ag surface at room temperature. The two-dimensional √ 3 silver adlayer acts to passivate the silicon surface and provides a high-mobility template for TBTTA adsorption. Scanning tunneling microscopy (STM) images reveal that at low coverage, the molecules readily migrate to step edges and defects in the √ 3 overlayer. With increasing coverage, the molecules eventually form compact supramolecular structures. In terms of the hexagonal √ 3 lattice vectors (a√ 3 and b√ 3), the oblique unit cell of these structures can be defined by lattice vectors am = 3a√ 3 + 2b√ 3, and bm = - a√ 3 + b√ 3. The structures are quite fragile and can decompose under repeated STM imaging. This is particularly true at higher bias and suggests an electric field-induced dissociation in these instances. With increasing molecular dose, the size and stability of the structures increases. At higher coverage, the spatial extent of the supramolecular structures is often limited by defects in the underlying √ 3 layer. Our results suggest that the √ 3-Ag surface provides a relatively inert substrate for the adsorption of TBTTA molecules, and that the supramolecular structures are held together by relatively weak intermolecular forces.

Operationalizing universal health coverage in Nigeria through social health insurance

PubMed Central

Okpani, Arnold Ikedichi; Abimbola, Seye

2015-01-01

Nigeria faces challenges that delay progress toward the attainment of the national government's declared goal of universal health coverage (UHC). One such challenge is system-wide inequities resulting from lack of financial protection for the health care needs of the vast majority of Nigerians. Only a small proportion of Nigerians have prepaid health care. In this paper, we draw on existing evidence to suggest steps toward reforming health care financing in Nigeria to achieve UHC through social health insurance. This article sets out to demonstrate that a viable path to UHC through expanding social health insurance exists in Nigeria. We argue that encouraging the states which are semi-autonomous federating units to setup and manage their own insurance schemes presents a unique opportunity for rapidly scaling up prepaid coverage for Nigerians. We show that Nigeria's federal structure which prescribes a sharing of responsibilities for health care among the three tiers of government presents serious challenges for significantly extending social insurance to uncovered groups. We recommend that rather than allowing this governance structure to impair progress toward UHC, it should be leveraged to accelerate the process by supporting the states to establish and manage their own insurance funds while encouraging integration with the National Health Insurance Scheme. PMID:26778879

Optimizing space constellations for mobile satellite systems

NASA Technical Reports Server (NTRS)

Roussel, T.; Taisant, J.-P.

1993-01-01

Designing a mobile satellite system entails many complex trade-offs between a great number of parameters including: capacity, complexity of the payload, constellation geometry, number of satellites, quality of coverage, etc. This paper aims at defining a methodology which tries to split the variables to give rapidly some first results. The major input considered is the traffic assumption which would be offered by the system. A first key step is the choice of the best Rider or Walker constellation geometries - with different numbers of satellites - to insure a good quality of coverage over a selected service area. Another aspect to be addressed is the possible altitude location of the constellation, since it is limited by many constraints. The altitude ranges that seem appropriate considering the spatial environment, the launch and orbit keeping policy and the feasibility of the antenna allowing sufficient frequency reuse are briefly analyzed. To support these first considerations, some 'reference constellations' with similar coverage quality are chosen. The in-orbit capacity needed to support the assumed traffic is computed versus altitude. Finally, the exact number of satellite is determined. It comes as an optimum between a small number of satellites offering a high (and costly) power margin in bad propagation situation and a great number of less powerful satellites granting the same quality of service.

Open-source algorithm for detecting sea ice surface features in high-resolution optical imagery

NASA Astrophysics Data System (ADS)

Wright, Nicholas C.; Polashenski, Chris M.

2018-04-01

Snow, ice, and melt ponds cover the surface of the Arctic Ocean in fractions that change throughout the seasons. These surfaces control albedo and exert tremendous influence over the energy balance in the Arctic. Increasingly available meter- to decimeter-scale resolution optical imagery captures the evolution of the ice and ocean surface state visually, but methods for quantifying coverage of key surface types from raw imagery are not yet well established. Here we present an open-source system designed to provide a standardized, automated, and reproducible technique for processing optical imagery of sea ice. The method classifies surface coverage into three main categories: snow and bare ice, melt ponds and submerged ice, and open water. The method is demonstrated on imagery from four sensor platforms and on imagery spanning from spring thaw to fall freeze-up. Tests show the classification accuracy of this method typically exceeds 96 %. To facilitate scientific use, we evaluate the minimum observation area required for reporting a representative sample of surface coverage. We provide an open-source distribution of this algorithm and associated training datasets and suggest the community consider this a step towards standardizing optical sea ice imagery processing. We hope to encourage future collaborative efforts to improve the code base and to analyze large datasets of optical sea ice imagery.

Optimizing space constellations for mobile satellite systems

NASA Astrophysics Data System (ADS)

Roussel, T.; Taisant, J.-P.

Designing a mobile satellite system entails many complex trade-offs between a great number of parameters including: capacity, complexity of the payload, constellation geometry, number of satellites, quality of coverage, etc. This paper aims at defining a methodology which tries to split the variables to give rapidly some first results. The major input considered is the traffic assumption which would be offered by the system. A first key step is the choice of the best Rider or Walker constellation geometries - with different numbers of satellites - to insure a good quality of coverage over a selected service area. Another aspect to be addressed is the possible altitude location of the constellation, since it is limited by many constraints. The altitude ranges that seem appropriate considering the spatial environment, the launch and orbit keeping policy and the feasibility of the antenna allowing sufficient frequency reuse are briefly analyzed. To support these first considerations, some 'reference constellations' with similar coverage quality are chosen. The in-orbit capacity needed to support the assumed traffic is computed versus altitude. Finally, the exact number of satellite is determined. It comes as an optimum between a small number of satellites offering a high (and costly) power margin in bad propagation situation and a great number of less powerful satellites granting the same quality of service.

MELTS_Excel: A Microsoft Excel-based MELTS interface for research and teaching of magma properties and evolution

NASA Astrophysics Data System (ADS)

Gualda, Guilherme A. R.; Ghiorso, Mark S.

2015-01-01

thermodynamic modeling software MELTS is a powerful tool for investigating crystallization and melting in natural magmatic systems. Rhyolite-MELTS is a recalibration of MELTS that better captures the evolution of silicic magmas in the upper crust. The current interface of rhyolite-MELTS, while flexible, can be somewhat cumbersome for the novice. We present a new interface that uses web services consumed by a VBA backend in Microsoft Excel©. The interface is contained within a macro-enabled workbook, where the user can insert the model input information and initiate computations that are executed on a central server at OFM Research. Results of simple calculations are shown immediately within the interface itself. It is also possible to combine a sequence of calculations into an evolutionary path; the user can input starting and ending temperatures and pressures, temperature and pressure steps, and the prevailing oxidation conditions. The program shows partial updates at every step of the computations; at the conclusion of the calculations, a series of data sheets and diagrams are created in a separate workbook, which can be saved independently of the interface. Additionally, the user can specify a grid of temperatures and pressures and calculate a phase diagram showing the conditions at which different phases are present. The interface can be used to apply the rhyolite-MELTS geobarometer. We demonstrate applications of the interface using an example early-erupted Bishop Tuff composition. The interface is simple to use and flexible, but it requires an internet connection. The interface is distributed for free from http://melts.ofm-research.org.

Titanium dioxide@polypyrrole core-shell nanowires for all solid-state flexible supercapacitors.

PubMed

Yu, Minghao; Zeng, Yinxiang; Zhang, Chong; Lu, Xihong; Zeng, Chenghui; Yao, Chenzhong; Yang, Yangyi; Tong, Yexiang

2013-11-21

Herein, we developed a facile two-step process to synthesize TiO2@PPy core-shell nanowires (NWs) on carbon cloth and reported their improved electrochemical performance for flexible supercapacitors (SCs). The fabricated solid-state SC device based on TiO2@PPy core-shell NWs not only has excellent flexibility, but also exhibits remarkable electrochemical performance.

To direct the Secretary of Education to establish and administer an awards program recognizing excellence exhibited by public school system employees providing services to students in pre-kindergarten through higher education.

THOMAS, 111th Congress

Rep. Titus, Dina [D-NV-3

2009-05-12

Senate - 03/16/2010 Received in the Senate and Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status Passed HouseHere are the steps for Status of Legislation: