Development of the psychological impact of tinnitus interview: a clinician-administered measure of tinnitus-related distress.

PubMed

Henry, J L; Kangas, M; Wilson, P H

2001-01-01

The development of valid and reliable methods for assessing psychological aspects of tinnitus continues to be an important goal of research. Such assessment methods are potentially useful in clinical and research contexts. Existing self-report measures have a number of disadvantages, and so a need exists to develop a form of assessment that is less open to response bias and the effects of experimental demand. A new approach, the Psychological Impact of Tinnitus Interview (PITI), is described, and some preliminary data on its psychometric properties are reported. The results suggest that the PITI is capable of providing a measure of separate, relatively independent dimensions of tinnitus-related distress--namely, sleep difficulties, general distress, mood, suicidal aspects, and avoidance of or interference with normal activities. This method may lead to more refined measures of these dimensions of tinnitus-related psychological difficulties. The PITI should be regarded as a promising assessment tool for use in experimental settings, pending further work on its content, coding method, and administration.

An Early Years Toolbox for Assessing Early Executive Function, Language, Self-Regulation, and Social Development: Validity, Reliability, and Preliminary Norms

PubMed Central

Howard, Steven J.; Melhuish, Edward

2016-01-01

Several methods of assessing executive function (EF), self-regulation, language development, and social development in young children have been developed over previous decades. Yet new technologies make available methods of assessment not previously considered. In resolving conceptual and pragmatic limitations of existing tools, the Early Years Toolbox (EYT) offers substantial advantages for early assessment of language, EF, self-regulation, and social development. In the current study, results of our large-scale administration of this toolbox to 1,764 preschool and early primary school students indicated very good reliability, convergent validity with existing measures, and developmental sensitivity. Results were also suggestive of better capture of children’s emerging abilities relative to comparison measures. Preliminary norms are presented, showing a clear developmental trajectory across half-year age groups. The accessibility of the EYT, as well as its advantages over existing measures, offers considerably enhanced opportunities for objective measurement of young children’s abilities to enable research and educational applications. PMID:28503022

A method for the design and development of medical or health care information websites to optimize search engine results page rankings on Google.

PubMed

Dunne, Suzanne; Cummins, Niamh Maria; Hannigan, Ailish; Shannon, Bill; Dunne, Colum; Cullen, Walter

2013-08-27

The Internet is a widely used source of information for patients searching for medical/health care information. While many studies have assessed existing medical/health care information on the Internet, relatively few have examined methods for design and delivery of such websites, particularly those aimed at the general public. This study describes a method of evaluating material for new medical/health care websites, or for assessing those already in existence, which is correlated with higher rankings on Google's Search Engine Results Pages (SERPs). A website quality assessment (WQA) tool was developed using criteria related to the quality of the information to be contained in the website in addition to an assessment of the readability of the text. This was retrospectively applied to assess existing websites that provide information about generic medicines. The reproducibility of the WQA tool and its predictive validity were assessed in this study. The WQA tool demonstrated very high reproducibility (intraclass correlation coefficient=0.95) between 2 independent users. A moderate to strong correlation was found between WQA scores and rankings on Google SERPs. Analogous correlations were seen between rankings and readability of websites as determined by Flesch Reading Ease and Flesch-Kincaid Grade Level scores. The use of the WQA tool developed in this study is recommended as part of the design phase of a medical or health care information provision website, along with assessment of readability of the material to be used. This may ensure that the website performs better on Google searches. The tool can also be used retrospectively to make improvements to existing websites, thus, potentially enabling better Google search result positions without incurring the costs associated with Search Engine Optimization (SEO) professionals or paid promotion.

A Method for the Design and Development of Medical or Health Care Information Websites to Optimize Search Engine Results Page Rankings on Google

PubMed Central

Cummins, Niamh Maria; Hannigan, Ailish; Shannon, Bill; Dunne, Colum; Cullen, Walter

2013-01-01

Background The Internet is a widely used source of information for patients searching for medical/health care information. While many studies have assessed existing medical/health care information on the Internet, relatively few have examined methods for design and delivery of such websites, particularly those aimed at the general public. Objective This study describes a method of evaluating material for new medical/health care websites, or for assessing those already in existence, which is correlated with higher rankings on Google's Search Engine Results Pages (SERPs). Methods A website quality assessment (WQA) tool was developed using criteria related to the quality of the information to be contained in the website in addition to an assessment of the readability of the text. This was retrospectively applied to assess existing websites that provide information about generic medicines. The reproducibility of the WQA tool and its predictive validity were assessed in this study. Results The WQA tool demonstrated very high reproducibility (intraclass correlation coefficient=0.95) between 2 independent users. A moderate to strong correlation was found between WQA scores and rankings on Google SERPs. Analogous correlations were seen between rankings and readability of websites as determined by Flesch Reading Ease and Flesch-Kincaid Grade Level scores. Conclusions The use of the WQA tool developed in this study is recommended as part of the design phase of a medical or health care information provision website, along with assessment of readability of the material to be used. This may ensure that the website performs better on Google searches. The tool can also be used retrospectively to make improvements to existing websites, thus, potentially enabling better Google search result positions without incurring the costs associated with Search Engine Optimization (SEO) professionals or paid promotion. PMID:23981848

Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work.

PubMed

Rahman, Mohd Nasrull Abdol; Mohamad, Siti Shafika

2017-01-01

Computer works are associated with Musculoskeletal Disorders (MSDs). There are several methods have been developed to assess computer work risk factor related to MSDs. This review aims to give an overview of current techniques available for pen-and-paper-based observational methods in assessing ergonomic risk factors of computer work. We searched an electronic database for materials from 1992 until 2015. The selected methods were focused on computer work, pen-and-paper observational methods, office risk factors and musculoskeletal disorders. This review was developed to assess the risk factors, reliability and validity of pen-and-paper observational method associated with computer work. Two evaluators independently carried out this review. Seven observational methods used to assess exposure to office risk factor for work-related musculoskeletal disorders were identified. The risk factors involved in current techniques of pen and paper based observational tools were postures, office components, force and repetition. From the seven methods, only five methods had been tested for reliability. They were proven to be reliable and were rated as moderate to good. For the validity testing, from seven methods only four methods were tested and the results are moderate. Many observational tools already exist, but no single tool appears to cover all of the risk factors including working posture, office component, force, repetition and office environment at office workstations and computer work. Although the most important factor in developing tool is proper validation of exposure assessment techniques, the existing observational method did not test reliability and validity. Futhermore, this review could provide the researchers with ways on how to improve the pen-and-paper-based observational method for assessing ergonomic risk factors of computer work.

A method to assess the allocation suitability of recreational activities: An economic approach

NASA Astrophysics Data System (ADS)

Wang, Hsiao-Lin

1996-03-01

Most existing methods of planning focus on development of a recreational area; less consideration is placed on the allocation of recreational activities within a recreational area. Most existing research emphasizes the economic benefits of developing a recreational area; few authors assessed the allocation suitability of recreational activities from an economic point of view. The purpose of this work was to develop a model to assess the allocation suitability of recreational activities according to the application of a concept of analysis of cost and benefit under a premise of ecological concern. The model was verified with a case study of Taiwan. We suggest that the proposed model should form a critical part of recreational planning.

Multi-Method Assessment of Feeding Problems among Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Sharp, William G.; Jaquess, David L.; Lukens, Colleen T.

2013-01-01

Estimates suggest that atypical eating is pervasive among children with autism spectrum disorders (ASD); however, much remains unknown regarding the nature and prevalence of feeding problems in this population due to methodological limitations, including lack of adequate assessment methods and empirical evaluation of existing measures. In the…

Advancing methods for research on household water insecurity: Studying entitlements and capabilities, socio-cultural dynamics, and political processes, institutions and governance.

PubMed

Wutich, Amber; Budds, Jessica; Eichelberger, Laura; Geere, Jo; Harris, Leila; Horney, Jennifer; Jepson, Wendy; Norman, Emma; O'Reilly, Kathleen; Pearson, Amber; Shah, Sameer; Shinn, Jamie; Simpson, Karen; Staddon, Chad; Stoler, Justin; Teodoro, Manuel P; Young, Sera

2017-11-01

Household water insecurity has serious implications for the health, livelihoods and wellbeing of people around the world. Existing methods to assess the state of household water insecurity focus largely on water quality, quantity or adequacy, source or reliability, and affordability. These methods have significant advantages in terms of their simplicity and comparability, but are widely recognized to oversimplify and underestimate the global burden of household water insecurity. In contrast, a broader definition of household water insecurity should include entitlements and human capabilities, sociocultural dynamics, and political institutions and processes. This paper proposes a mix of qualitative and quantitative methods that can be widely adopted across cultural, geographic, and demographic contexts to assess hard-to-measure dimensions of household water insecurity. In doing so, it critically evaluates existing methods for assessing household water insecurity and suggests ways in which methodological innovations advance a broader definition of household water insecurity.

Rapid Health and Needs assessments after disasters: a systematic review

PubMed Central

2010-01-01

Background Publichealth care providers, stakeholders and policy makers request a rapid insight into health status and needs of the affected population after disasters. To our knowledge, there is no standardized rapid assessment tool for European countries. The aim of this article is to describe existing tools used internationally and analyze them for the development of a workable rapid assessment. Methods A review was conducted, including original studies concerning a rapid health and/or needs assessment. The studies used were published between 1980 and 2009. The electronic databasesof Medline, Embase, SciSearch and Psychinfo were used. Results Thirty-three studies were included for this review. The majority of the studies was of US origin and in most cases related to natural disasters, especially concerning the weather. In eighteen studies an assessment was conducted using a structured questionnaire, eleven studies used registries and four used both methods. Questionnaires were primarily used to asses the health needs, while data records were used to assess the health status of disaster victims. Conclusions Methods most commonly used were face to face interviews and data extracted from existing registries. Ideally, a rapid assessment tool is needed which does not add to the burden of disaster victims. In this perspective, the use of existing medical registries in combination with a brief questionnaire in the aftermath of disasters is the most promising. Since there is an increasing need for such a tool this approach needs further examination. PMID:20515478

External benefits of natural environments

Treesearch

Larry W. Tombaugh

1971-01-01

Existing methods of assessing economic benefits arising from certain physical environments left in a relatively natural condition do not include estimates of external benefits. Existence value is one such external benefit that accrues to individuals who have no intention of ever visiting the area in question. A partial measure of the existence value of National Parks...

Development and Application of a Soil Moisture Downscaling Method for Mobility Assessment

DTIC Science & Technology

2011-05-01

instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send...REPORT Development and Application of a Soil Moisture Downscaling Method for Mobility Assessment 14. ABSTRACT 16. SECURITY CLASSIFICATION OF: Soil...cells). Thus, a method is required to downscale intermediate-resolution patterns to finer resolutions. Fortunately, fine-resolution variations in

Sociometric Indicators of Leadership: An Exploratory Analysis

DTIC Science & Technology

2018-01-01

streamline existing observational protocols and assessment methods . This research provides an initial test of sociometric badges in the context of the U.S...understand, the requirements of the mission. Traditional research and assessment methods focusing on leader and follower interactions require direct...based methods of social network analysis. Novel Measures of Leadership Building on these findings and earlier research , it is apparent that

Quality Assessment of Internationalised Studies: Theory and Practice

ERIC Educational Resources Information Center

Juknyte-Petreikiene, Inga

2013-01-01

The article reviews forms of higher education internationalisation at an institutional level. The relevance of theoretical background of internationalised study quality assessment is highlighted and definitions of internationalised studies quality are presented. Existing methods of assessment of higher education internationalisation are criticised…

Boomerang: A method for recursive reclassification.

PubMed

Devlin, Sean M; Ostrovnaya, Irina; Gönen, Mithat

2016-09-01

While there are many validated prognostic classifiers used in practice, often their accuracy is modest and heterogeneity in clinical outcomes exists in one or more risk subgroups. Newly available markers, such as genomic mutations, may be used to improve the accuracy of an existing classifier by reclassifying patients from a heterogenous group into a higher or lower risk category. The statistical tools typically applied to develop the initial classifiers are not easily adapted toward this reclassification goal. In this article, we develop a new method designed to refine an existing prognostic classifier by incorporating new markers. The two-stage algorithm called Boomerang first searches for modifications of the existing classifier that increase the overall predictive accuracy and then merges to a prespecified number of risk groups. Resampling techniques are proposed to assess the improvement in predictive accuracy when an independent validation data set is not available. The performance of the algorithm is assessed under various simulation scenarios where the marker frequency, degree of censoring, and total sample size are varied. The results suggest that the method selects few false positive markers and is able to improve the predictive accuracy of the classifier in many settings. Lastly, the method is illustrated on an acute myeloid leukemia data set where a new refined classifier incorporates four new mutations into the existing three category classifier and is validated on an independent data set. © 2016, The International Biometric Society.

Boomerang: A Method for Recursive Reclassification

PubMed Central

Devlin, Sean M.; Ostrovnaya, Irina; Gönen, Mithat

2016-01-01

Summary While there are many validated prognostic classifiers used in practice, often their accuracy is modest and heterogeneity in clinical outcomes exists in one or more risk subgroups. Newly available markers, such as genomic mutations, may be used to improve the accuracy of an existing classifier by reclassifying patients from a heterogenous group into a higher or lower risk category. The statistical tools typically applied to develop the initial classifiers are not easily adapted towards this reclassification goal. In this paper, we develop a new method designed to refine an existing prognostic classifier by incorporating new markers. The two-stage algorithm called Boomerang first searches for modifications of the existing classifier that increase the overall predictive accuracy and then merges to a pre-specified number of risk groups. Resampling techniques are proposed to assess the improvement in predictive accuracy when an independent validation data set is not available. The performance of the algorithm is assessed under various simulation scenarios where the marker frequency, degree of censoring, and total sample size are varied. The results suggest that the method selects few false positive markers and is able to improve the predictive accuracy of the classifier in many settings. Lastly, the method is illustrated on an acute myeloid leukemia dataset where a new refined classifier incorporates four new mutations into the existing three category classifier and is validated on an independent dataset. PMID:26754051

Global antioxidant response of meat.

PubMed

Carrillo, Celia; Barrio, Ángela; Del Mar Cavia, María; Alonso-Torre, Sara

2017-06-01

The global antioxidant response (GAR) method uses an enzymatic digestion to release antioxidants from foods. Owing to the importance of digestion for protein breakdown and subsequent release of bioactive compounds, the aim of the present study was to compare the GAR method for meat with the existing methodologies: the extraction-based method and QUENCHER. Seven fresh meats were analyzed using ABTS and FRAP assays. Our results indicated that the GAR of meat was higher than the total antioxidant capacity (TAC) assessed with the traditional extraction-based method. When evaluated with GAR, the thermal treatment led to an increase in the TAC of the soluble fraction, contrasting with a decreased TAC after cooking measured using the extraction-based method. The effect of thermal treatment on the TAC assessed by the QUENCHER method seemed to be dependent on the assay applied, since results from ABTS differed from FRAP. Our results allow us to hypothesize that the activation of latent bioactive peptides along the gastrointestinal tract should be taken into consideration when evaluating the TAC of meat. Therefore, we conclude that the GAR method may be more appropriate for assessing the TAC of meat than the existing, most commonly used methods. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

A STANDARDIZED ASSESSMENT METHOD (SAM) FOR RIVERINE MACROINVERTEBRATES

EPA Science Inventory

A macroinvertebrate sampling method for large rivers based on desirable characteristics of existing nonwadeable methods was developed and tested. Six sites each were sampled on the Great Miami and Kentucky Rivers, reflecting a human disturbance gradient. Samples were collected ...

Documenting Preservice Teacher Growth through Critical Assessment of Online Lesson Plans

ERIC Educational Resources Information Center

Cude, Michelle D.; Haraway, Dana L.

2017-01-01

This research explores the question of how students in a social studies methods course improve skills in analyzing and critiquing pre-existing lesson plans. It utilizes a pre-post authentic assessment tool to measure student growth in key skills of lesson plan critique over the course of one semester's methods instruction. The results support the…

Review Article "Valuating the intangible effects of natural hazards - review and analysis of the costing methods"

NASA Astrophysics Data System (ADS)

Markantonis, V.; Meyer, V.; Schwarze, R.

2012-05-01

The "intangible" or "non-market" effects are those costs of natural hazards which are not, or at least not easily measurable in monetary terms, as for example, impacts on health, cultural heritage or the environment. The intangible effects are often not included in costs assessments of natural hazards leading to an incomplete and biased cost assessment. However, several methods exist which try to estimate these effects in a non-monetary or monetary form. The objective of the present paper is to review and evaluate methods for estimating the intangible effects of natural hazards, specifically related to health and environmental effects. Existing methods are analyzed and compared using various criteria, research gaps are identified, application recommendations are provided, and valuation issues that should be addressed by the scientific community are highlighted.

Putting social impact assessment to the test as a method for implementing responsible tourism practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCombes, Lucy, E-mail: l.mccombes@leedsbeckett.ac.uk; Vanclay, Frank, E-mail: frank.vanclay@rug.nl; Evers, Yvette, E-mail: y.evers@tft-earth.org

The discourse on the social impacts of tourism needs to shift from the current descriptive critique of tourism to considering what can be done in actual practice to embed the management of tourism's social impacts into the existing planning, product development and operational processes of tourism businesses. A pragmatic approach for designing research methodologies, social management systems and initial actions, which is shaped by the real world operational constraints and existing systems used in the tourism industry, is needed. Our pilot study with a small Bulgarian travel company put social impact assessment (SIA) to the test to see if itmore » could provide this desired approach and assist in implementing responsible tourism development practice, especially in small tourism businesses. Our findings showed that our adapted SIA method has value as a practical method for embedding a responsible tourism approach. While there were some challenges, SIA proved to be effective in assisting the staff of our test case tourism business to better understand their social impacts on their local communities and to identify actions to take. - Highlights: • Pragmatic approach is needed for the responsible management of social impacts of tourism. • Our adapted Social impact Assessment (SIA) method has value as a practical method. • SIA can be embedded into tourism businesses existing ‘ways of doing things’. • We identified challenges and ways to improve our method to better suit small tourism business context.« less

Oral Assessment in Mathematics: Implementation and Outcomes

ERIC Educational Resources Information Center

Iannone, P.; Simpson, A.

2012-01-01

In this article, we report the planning and implementation of an oral assessment component in a first-year pure mathematics module of a degree course in mathematics. Our aim was to examine potential barriers to using oral assessments, explore the advantages and disadvantages compared to existing common assessment methods and document the outcomes…

A PROPOSED FRAMEWORK FOR ASSESSING RISK FROM LESS-THAN-LIFETIME EXPOSURES TO CARCINOGENS

EPA Science Inventory

Quantitative cancer risk assessment methods have been developed for daily, lifetime human exposures, but not for exposures that are less than lifetime. Few examples for less-than-Iifetime exposures exist in the published literature. To move cancer risk assessment beyond reliance ...

Estimation of the behavior factor of existing RC-MRF buildings

NASA Astrophysics Data System (ADS)

Vona, Marco; Mastroberti, Monica

2018-01-01

In recent years, several research groups have studied a new generation of analysis methods for seismic response assessment of existing buildings. Nevertheless, many important developments are still needed in order to define more reliable and effective assessment procedures. Moreover, regarding existing buildings, it should be highlighted that due to the low knowledge level, the linear elastic analysis is the only analysis method allowed. The same codes (such as NTC2008, EC8) consider the linear dynamic analysis with behavior factor as the reference method for the evaluation of seismic demand. This type of analysis is based on a linear-elastic structural model subject to a design spectrum, obtained by reducing the elastic spectrum through a behavior factor. The behavior factor (reduction factor or q factor in some codes) is used to reduce the elastic spectrum ordinate or the forces obtained from a linear analysis in order to take into account the non-linear structural capacities. The behavior factors should be defined based on several parameters that influence the seismic nonlinear capacity, such as mechanical materials characteristics, structural system, irregularity and design procedures. In practical applications, there is still an evident lack of detailed rules and accurate behavior factor values adequate for existing buildings. In this work, some investigations of the seismic capacity of the main existing RC-MRF building types have been carried out. In order to make a correct evaluation of the seismic force demand, actual behavior factor values coherent with force based seismic safety assessment procedure have been proposed and compared with the values reported in the Italian seismic code, NTC08.

Ecological momentary assessment: what it is and why it is a method of the future in clinical psychopharmacology

PubMed Central

Moskowitz, Debbie S.; Young, Simon N.

2006-01-01

Current methods of assessment in clinical psychopharmacology have several serious disadvantages, particularly for the study of social functioning. We aimed to review the strengths and weaknesses of current methods used in clinical psychopharmacology and to compare them with a group of methods, developed by personality/social psychologists, termed ecological momentary assessment (EMA), which permit the research participant to report on symptoms, affect and behaviour close in time to experience and which sample many events or time periods. EMA has a number of advantages over more traditional methods for the assessment of patients in clinical psychopharmacological studies. It can both complement and, in part, replace existing methods. EMA methods will permit more sensitive assessments and will enable more wide-ranging and detailed measurements of mood and behaviour. These types of methods should be adopted more widely by clinical psychopharmacology researchers. PMID:16496031

Reserves in load capacity assessment of existing bridges

NASA Astrophysics Data System (ADS)

Žitný, Jan; Ryjáček, Pavel

2017-09-01

High percentage of all railway bridges in the Czech Republic is made of structural steel. Majority of these bridges is designed according to historical codes and according to the deterioration, they have to be assessed if they satisfy the needs of modern railway traffic. The load capacity assessment of existing bridges according to Eurocodes is however often too conservative and especially, braking and acceleration forces cause huge problems to structural elements of the bridge superstructure. The aim of this paper is to review the different approaches for the determination of braking and acceleration forces. Both, current and historical theoretical models and in-situ measurements are considered. The research of several local European state norms superior to Eurocode for assessment of existing railway bridges shows the big diversity of used local approaches and the conservativeness of Eurocode. This paper should also work as an overview for designers dealing with load capacity assessment, revealing the reserves for existing bridges. Based on these different approaches, theoretical models and data obtained from the measurements, the method for determination of braking and acceleration forces on the basis of real traffic data should be proposed.

Assessing Understanding of Complex Causal Networks Using an Interactive Game

ERIC Educational Resources Information Center

Ross, Joel

2013-01-01

Assessing people's understanding of the causal relationships found in large-scale complex systems may be necessary for addressing many critical social concerns, such as environmental sustainability. Existing methods for assessing systems thinking and causal understanding frequently use the technique of cognitive causal mapping. However, the…

Self-Assessment and Peer-Assessment in an EFL Context

ERIC Educational Resources Information Center

Yamini, Morteza; Tahmasebi, Soheila

2012-01-01

Salient in an EFL teaching context is students' dissatisfaction with their final scores especially in oral courses. This study tried to bridge the gap between students' and teachers' rating system through alternatives to existing measurement methods. Task-based language assessment has stimulated language teachers to question the way through which…

Teachers' Views of Their Assessment Practice

ERIC Educational Resources Information Center

Atjonen, Päivi

2014-01-01

The main aim of this research was to analyse teachers' views of pupil assessment. The theoretical framework was based on existing literature on advances and challenges of pupil assessment in regard to support for learning, fairness, educational partnership, feedback, and favourable methods. The data were gathered by means of a questionnaire…

Effective evaluation of privacy protection techniques in visible and thermal imagery

NASA Astrophysics Data System (ADS)

Nawaz, Tahir; Berg, Amanda; Ferryman, James; Ahlberg, Jörgen; Felsberg, Michael

2017-09-01

Privacy protection may be defined as replacing the original content in an image region with a (less intrusive) content having modified target appearance information to make it less recognizable by applying a privacy protection technique. Indeed, the development of privacy protection techniques also needs to be complemented with an established objective evaluation method to facilitate their assessment and comparison. Generally, existing evaluation methods rely on the use of subjective judgments or assume a specific target type in image data and use target detection and recognition accuracies to assess privacy protection. An annotation-free evaluation method that is neither subjective nor assumes a specific target type is proposed. It assesses two key aspects of privacy protection: "protection" and "utility." Protection is quantified as an appearance similarity, and utility is measured as a structural similarity between original and privacy-protected image regions. We performed an extensive experimentation using six challenging datasets (having 12 video sequences), including a new dataset (having six sequences) that contains visible and thermal imagery. The new dataset is made available online for the community. We demonstrate effectiveness of the proposed method by evaluating six image-based privacy protection techniques and also show comparisons of the proposed method over existing methods.

Construction of Expert Knowledge Monitoring and Assessment System Based on Integral Method of Knowledge Evaluation

ERIC Educational Resources Information Center

Golovachyova, Viktoriya N.; Menlibekova, Gulbakhyt Zh.; Abayeva, Nella F.; Ten, Tatyana L.; Kogaya, Galina D.

2016-01-01

Using computer-based monitoring systems that rely on tests could be the most effective way of knowledge evaluation. The problem of objective knowledge assessment by means of testing takes on a new dimension in the context of new paradigms in education. The analysis of the existing test methods enabled us to conclude that tests with selected…

Analytical Fuselage and Wing Weight Estimation of Transport Aircraft

NASA Technical Reports Server (NTRS)

Chambers, Mark C.; Ardema, Mark D.; Patron, Anthony P.; Hahn, Andrew S.; Miura, Hirokazu; Moore, Mark D.

1996-01-01

A method of estimating the load-bearing fuselage weight and wing weight of transport aircraft based on fundamental structural principles has been developed. This method of weight estimation represents a compromise between the rapid assessment of component weight using empirical methods based on actual weights of existing aircraft, and detailed, but time-consuming, analysis using the finite element method. The method was applied to eight existing subsonic transports for validation and correlation. Integration of the resulting computer program, PDCYL, has been made into the weights-calculating module of the AirCraft SYNThesis (ACSYNT) computer program. ACSYNT has traditionally used only empirical weight estimation methods; PDCYL adds to ACSYNT a rapid, accurate means of assessing the fuselage and wing weights of unconventional aircraft. PDCYL also allows flexibility in the choice of structural concept, as well as a direct means of determining the impact of advanced materials on structural weight. Using statistical analysis techniques, relations between the load-bearing fuselage and wing weights calculated by PDCYL and corresponding actual weights were determined.

Development of Advanced Methods of Structural and Trajectory Analysis for Transport Aircraft

NASA Technical Reports Server (NTRS)

Ardema, Mark D.

1996-01-01

In this report the author describes: (1) development of advanced methods of structural weight estimation, and (2) development of advanced methods of flight path optimization. A method of estimating the load-bearing fuselage weight and wing weight of transport aircraft based on fundamental structural principles has been developed. This method of weight estimation represents a compromise between the rapid assessment of component weight using empirical methods based on actual weights of existing aircraft and detailed, but time-consuming, analysis using the finite element method. The method was applied to eight existing subsonic transports for validation and correlation. Integration of the resulting computer program, PDCYL, has been made into the weights-calculating module of the AirCraft SYNThesis (ACSYNT) computer program. ACSYNT bas traditionally used only empirical weight estimation methods; PDCYL adds to ACSYNT a rapid, accurate means of assessing the fuselage and wing weights of unconventional aircraft. PDCYL also allows flexibility in the choice of structural concept, as well as a direct means of determining the impact of advanced materials on structural weight.

Tiered Approach to Resilience Assessment.

PubMed

Linkov, Igor; Fox-Lent, Cate; Read, Laura; Allen, Craig R; Arnott, James C; Bellini, Emanuele; Coaffee, Jon; Florin, Marie-Valentine; Hatfield, Kirk; Hyde, Iain; Hynes, William; Jovanovic, Aleksandar; Kasperson, Roger; Katzenberger, John; Keys, Patrick W; Lambert, James H; Moss, Richard; Murdoch, Peter S; Palma-Oliveira, Jose; Pulwarty, Roger S; Sands, Dale; Thomas, Edward A; Tye, Mari R; Woods, David

2018-04-25

Regulatory agencies have long adopted a three-tier framework for risk assessment. We build on this structure to propose a tiered approach for resilience assessment that can be integrated into the existing regulatory processes. Comprehensive approaches to assessing resilience at appropriate and operational scales, reconciling analytical complexity as needed with stakeholder needs and resources available, and ultimately creating actionable recommendations to enhance resilience are still lacking. Our proposed framework consists of tiers by which analysts can select resilience assessment and decision support tools to inform associated management actions relative to the scope and urgency of the risk and the capacity of resource managers to improve system resilience. The resilience management framework proposed is not intended to supplant either risk management or the many existing efforts of resilience quantification method development, but instead provide a guide to selecting tools that are appropriate for the given analytic need. The goal of this tiered approach is to intentionally parallel the tiered approach used in regulatory contexts so that resilience assessment might be more easily and quickly integrated into existing structures and with existing policies. Published 2018. This article is a U.S. government work and is in the public domain in the USA.

Assessing biodiversity on the farm scale as basis for ecosystem service payments.

PubMed

von Haaren, Christina; Kempa, Daniela; Vogel, Katrin; Rüter, Stefan

2012-12-30

Ecosystem services payments must be based on a standardised transparent assessment of the goods and services provided. This is especially relevant in the context of EU agri-environmental programs, but also for organic-food companies that foster environmental services on their contractor farms. Addressing the farm scale is important because land users/owners are major recipients of payments and they could be more involved in data generation and conservation management. A standardised system for measuring on-farm biodiversity does not yet exist that concentrates on performance indicators and includes farmers in generating information. A method is required that produces ordinal or metric scaled assessment results as well as management measures. Another requirement is the ease of application, which includes the ease of gathering input data and understandability. In order to respond to this need, we developed a method which is designed for automated application in an open source farm assessment system named MANUELA. The method produces an ordinal scale assessment of biodiversity that includes biotopes, species, biotope connectivity and the influence of land use. In addition, specific measures for biotope types are proposed. The open source geographical information system OpenJump is used for the implementation of MANUELA. The results of the trial applications and robustness tests show that the assessment can be implemented, for the most part, using existing information as well as data available from farmers or advisors. The results are more sensitive for showing on-farm achievements and changes than existing biotope-type classifications. Such a differentiated classification is needed as a basis for ecosystem service payments and for designing effective measures. The robustness of the results with respect to biotope connectivity is comparable to that of complex models, but it should be further improved. Interviews with the test farmers substantiate that the assessment methods can be implemented on farms and they are understood by farmers. Copyright © 2012 Elsevier Ltd. All rights reserved.

Health technology assessment of medical devices: a survey of non-European union agencies.

PubMed

Ciani, Oriana; Wilcher, Britni; Blankart, Carl Rudolf; Hatz, Maximilian; Rupel, Valentina Prevolnik; Erker, Renata Slabe; Varabyova, Yauheniya; Taylor, Rod S

2015-01-01

The aim of this study was to review and compare current health technology assessment (HTA) activities for medical devices across non-European Union HTA agencies. HTA activities for medical devices were evaluated from three perspectives: organizational structure, processes, and methods. Agencies were primarily selected upon membership of existing HTA networks. The data collection was performed in two stages: stage 1-agency Web-site assessment using a standardized questionnaire, followed by review and validation of the collected data by a representative of the agency; and stage 2-semi-structured telephone interviews with key informants of a sub-sample of agencies. In total, thirty-six HTA agencies across twenty non-EU countries assessing medical devices were included. Twenty-seven of thirty-six (75 percent) agencies were judged at stage 1 to have adopted HTA-specific approaches for medical devices (MD-specific agencies) that were largely organizational or procedural. There appeared to be few differences in the organization, process and methods between MD-specific and non-MD-specific agencies. Although the majority (69 percent) of both categories of agency had specific methods guidance or policy for evidence submission, only one MD-specific agency had developed methodological guidelines specific to medical devices. In stage 2, many MD-specific agencies cited insufficient resources (budget, skilled employees), lack of coordination (between regulator and reimbursement bodies), and the inability to generalize findings from evidence synthesis to be key challenges in the HTA of medical devices. The lack of evidence for differentiation in scientific methods for HTA of devices raises the question of whether HTA needs to develop new methods for medical devices but rather adapt existing methodological approaches. In contrast, organizational and/or procedural adaptation of existing HTA agency frameworks to accommodate medical devices appear relatively commonplace.

Trends in heteroepitaxy of III-Vs on silicon for photonic and photovoltaic applications

NASA Astrophysics Data System (ADS)

Lourdudoss, Sebastian; Junesand, Carl; Kataria, Himanshu; Metaferia, Wondwosen; Omanakuttan, Giriprasanth; Sun, Yan-Ting; Wang, Zhechao; Olsson, Fredrik

2017-02-01

We present and compare the existing methods of heteroepitaxy of III-Vs on silicon and their trends. We focus on the epitaxial lateral overgrowth (ELOG) method as a means of achieving good quality III-Vs on silicon. Initially conducted primarily by near-equilibrium epitaxial methods such as liquid phase epitaxy and hydride vapour phase epitaxy, nowadays ELOG is being carried out even by non-equilibrium methods such as metal organic vapour phase epitaxy. In the ELOG method, the intermediate defective seed and the mask layers still exist between the laterally grown purer III-V layer and silicon. In a modified ELOG method called corrugated epitaxial lateral overgrowth (CELOG) method, it is possible to obtain direct interface between the III-V layer and silicon. In this presentation we exemplify some recent results obtained by these techniques. We assess the potentials of these methods along with the other existing methods for realizing truly monolithic photonic integration on silicon and III-V/Si heterojunction solar cells.

Toward a Method for Exposing and Elucidating Ethical Issues with Human Cognitive Enhancement Technologies.

PubMed

Hofmann, Bjørn

2017-04-01

To develop a method for exposing and elucidating ethical issues with human cognitive enhancement (HCE). The intended use of the method is to support and facilitate open and transparent deliberation and decision making with respect to this emerging technology with great potential formative implications for individuals and society. Literature search to identify relevant approaches. Conventional content analysis of the identified papers and methods in order to assess their suitability for assessing HCE according to four selection criteria. Method development. Amendment after pilot testing on smart-glasses. Based on three existing approaches in health technology assessment a method for exposing and elucidating ethical issues in the assessment of HCE technologies was developed. Based on a pilot test for smart-glasses, the method was amended. The method consists of six steps and a guiding list of 43 questions. A method for exposing and elucidating ethical issues in the assessment of HCE was developed. The method provides the ground work for context specific ethical assessment and analysis. Widespread use, amendments, and further developments of the method are encouraged.

Assessing Aspects of Creativity in Deaf and Hearing High School Students

ERIC Educational Resources Information Center

Stanzione, Christopher M.; Perez, Susan M.; Lederberg, Amy R.

2013-01-01

To address the paucity of current research on the development of creativity in deaf students, and to extend existing research to adolescents, the present study investigated divergent thinking, a method of assessing creativity, in both deaf and hearing adolescents. We assessed divergent thinking in two domains, figural and verbal, while also…

Assessing the Utility of Item Response Theory Models: Differential Item Functioning.

ERIC Educational Resources Information Center

Scheuneman, Janice Dowd

The current status of item response theory (IRT) is discussed. Several IRT methods exist for assessing whether an item is biased. Focus is on methods proposed by L. M. Rudner (1975), F. M. Lord (1977), D. Thissen et al. (1988) and R. L. Linn and D. Harnisch (1981). Rudner suggested a measure of the area lying between the two item characteristic…

Research to Establish the Validity, Reliability, and Clinical Utility of a Comprehensive Language Assessment of Mandarin

ERIC Educational Resources Information Center

Liu, Xueman Lucy; de Villiers, Jill; Ning, Chunyan; Rolfhus, Eric; Hutchings, Teresa; Lee, Wendy; Jiang, Fan; Zhang, Yi Wen

2017-01-01

Purpose: With no existing gold standard for comparison, challenges arise for establishing the validity of a new standardized Mandarin language assessment normed in mainland China. Method: A new assessment, Diagnostic Receptive and Expressive Assessment of Mandarin (DREAM), was normed with a stratified sample of 969 children ages 2;6 (years;months)…

Toolbox for Evaluating Residents as Teachers

ERIC Educational Resources Information Center

Coverdale, John H.; Ismail, Nadia; Mian, Ayesha; Dewey, Charlene

2010-01-01

Objective: The authors review existing assessment tools related to evaluating residents' teaching skills and teaching effectiveness. Methods: PubMed and PsycInfo databases were searched using combinations of keywords including "residents," "residents as teachers," "teaching skills," and "assessments" or "rating scales." Results: Eleven evaluation…

Hazard and Risk of Glacial Lake Outburst Floods in the Nepal Himalayas

NASA Astrophysics Data System (ADS)

Rounce, David; McKinney, Daene

2016-04-01

As the climate changes and glaciers continue to melt, the number of glacial lakes and the size of these lakes is rapidly increasing. These glacial lakes are contained by terminal moraines composed of debris, soil, and sometimes ice, which are susceptible to fail catastrophically and cause a glacial lake outburst flood (GLOF). Understanding the hazard and risk associated with these lakes is important for downstream communities and other stakeholders, e.g., hydroelectric companies. Unfortunately, existing methods that are used to assess GLOF hazards yield conflicting classifications, which leads to confusion amongst the stakeholders who these studies are meant to assist. This study assesses existing methods on potentially dangerous glacial lakes in Nepal and uses these methods to develop an objective and holistic risk & action framework that may be used to assist and prioritize risk-mitigation actions.

Parent-Collected Behavioral Observations: An Empirical Comparison of Methods

ERIC Educational Resources Information Center

Nadler, Cy B.; Roberts, Mark W.

2013-01-01

Treatments for disruptive behaviors are often guided by parent reports on questionnaires, rather than by multiple methods of assessment. Professional observations and clinic analogs exist to complement questionnaires, but parents can also collect useful behavioral observations to inform and guide treatment. Two parent observation methods of child…

Analytical evaluation of current starch methods used in the international sugar industry: Part I

USDA-ARS?s Scientific Manuscript database

Several analytical starch methods currently exist in the international sugar industry that are used to prevent or mitigate starch-related processing challenges as well as assess the quality of traded end-products. These methods use simple iodometric chemistry, mostly potato starch standards, and uti...

Intelligent Tutoring System Using Decision Based Learning for Thermodynamic Phase Diagrams

ERIC Educational Resources Information Center

Hagge, Mathew; Amin-Naseri, Mostafa; Jackman, John; Guo, Enruo; Gilbert, Stephen B.; Starns, Gloria; Faidley, Leann

2017-01-01

Students learn when they connect new information to existing understanding or when they modify existing understanding to accept new information. Most current teaching methods focus on trying to get students to solve problems in a manner identical to that of an expert. This study investigates the effectiveness of assessing student understanding…

Assessing Species Diversity Using Metavirome Data: Methods and Challenges.

PubMed

Herath, Damayanthi; Jayasundara, Duleepa; Ackland, David; Saeed, Isaam; Tang, Sen-Lin; Halgamuge, Saman

2017-01-01

Assessing biodiversity is an important step in the study of microbial ecology associated with a given environment. Multiple indices have been used to quantify species diversity, which is a key biodiversity measure. Measuring species diversity of viruses in different environments remains a challenge relative to measuring the diversity of other microbial communities. Metagenomics has played an important role in elucidating viral diversity by conducting metavirome studies; however, metavirome data are of high complexity requiring robust data preprocessing and analysis methods. In this review, existing bioinformatics methods for measuring species diversity using metavirome data are categorised broadly as either sequence similarity-dependent methods or sequence similarity-independent methods. The former includes a comparison of DNA fragments or assemblies generated in the experiment against reference databases for quantifying species diversity, whereas estimates from the latter are independent of the knowledge of existing sequence data. Current methods and tools are discussed in detail, including their applications and limitations. Drawbacks of the state-of-the-art method are demonstrated through results from a simulation. In addition, alternative approaches are proposed to overcome the challenges in estimating species diversity measures using metavirome data.

Comparison of bulk sediment and sediment elutriate toxicity testing methods

EPA Science Inventory

Elutriate bioassays are among numerous methods that exist for assessing the potential toxicity of sediments in aquatic systems. In this study, interlaboratory results were compared from 96-hour Ceriodaphnia dubia and Pimephales promelas static-renewal acute toxicity tests conduct...

The method of educational assessment affects children's neural processing and performance: behavioural and fMRI Evidence

NASA Astrophysics Data System (ADS)

Howard, Steven J.; Burianová, Hana; Calleia, Alysha; Fynes-Clinton, Samuel; Kervin, Lisa; Bokosmaty, Sahar

2017-08-01

Standardised educational assessments are now widespread, yet their development has given comparatively more consideration to what to assess than how to optimally assess students' competencies. Existing evidence from behavioural studies with children and neuroscience studies with adults suggest that the method of assessment may affect neural processing and performance, but current evidence remains limited. To investigate the impact of assessment methods on neural processing and performance in young children, we used functional magnetic resonance imaging to identify and quantify the neural correlates during performance across a range of current approaches to standardised spelling assessment. Results indicated that children's test performance declined as the cognitive load of assessment method increased. Activation of neural nodes associated with working memory further suggests that this performance decline may be a consequence of a higher cognitive load, rather than the complexity of the content. These findings provide insights into principles of assessment (re)design, to ensure assessment results are an accurate reflection of students' true levels of competency.

Reduction of streamflow monitoring networks by a reference point approach

NASA Astrophysics Data System (ADS)

Cetinkaya, Cem P.; Harmancioglu, Nilgun B.

2014-05-01

Adoption of an integrated approach to water management strongly forces policy and decision-makers to focus on hydrometric monitoring systems as well. Existing hydrometric networks need to be assessed and revised against the requirements on water quantity data to support integrated management. One of the questions that a network assessment study should resolve is whether a current monitoring system can be consolidated in view of the increased expenditures in time, money and effort imposed on the monitoring activity. Within the last decade, governmental monitoring agencies in Turkey have foreseen an audit on all their basin networks in view of prevailing economic pressures. In particular, they question how they can decide whether monitoring should be continued or terminated at a particular site in a network. The presented study is initiated to address this question by examining the applicability of a method called “reference point approach” (RPA) for network assessment and reduction purposes. The main objective of the study is to develop an easily applicable and flexible network reduction methodology, focusing mainly on the assessment of the “performance” of existing streamflow monitoring networks in view of variable operational purposes. The methodology is applied to 13 hydrometric stations in the Gediz Basin, along the Aegean coast of Turkey. The results have shown that the simplicity of the method, in contrast to more complicated computational techniques, is an asset that facilitates the involvement of decision makers in application of the methodology for a more interactive assessment procedure between the monitoring agency and the network designer. The method permits ranking of hydrometric stations with regard to multiple objectives of monitoring and the desired attributes of the basin network. Another distinctive feature of the approach is that it also assists decision making in cases with limited data and metadata. These features of the RPA approach highlight its advantages over the existing network assessment and reduction methods.

Evaluation of green building rating tools based on existing green building achievement in Indonesia using Life Cycle Assessment Method

NASA Astrophysics Data System (ADS)

Basten, Van; Latief, Yusuf; Berawi, Mohammed Ali; Budiman, Rachmat; Riswanto

2017-03-01

Total completed building construction value in Indonesia increased 116% during 2009 to 2011. That's followed by increasing 11% energy consumption in Indonesia in the last three years with 70% energy met to the electricity needs of commercial building. In addition, a few application of green building concept in Indonesia made the greenhouse gas emissions or CO2 amount increased by 25%. Construction, operation, and maintain of building cost consider relatively high. The evaluation in this research is used to improve the building performance with some of green concept alternatives. The research methodology is conducted by combination of qualitative and quantitative approaches through interview and case study. Assessing the successful of optimization functions in the existing green building is based on the operational and maintenance phase with the Life Cycle Assessment (LCA) Method. The result of optimization that is the largest efficiency and effective of building life cycle.

Development of Novel Noninvasive Methods of Stress Assessment in Baleen Whales

DTIC Science & Technology

2014-09-30

large whales. Few methods exist for assessment of physiological stress levels of free-swimming cetaceans (Amaral 2010, ONR 2010, Hunt et al. 2013...hormone aldosterone . Our aim in this project is to further develop both techniques - respiratory hormone analysis and fecal hormone analysis - for use...noninvasive aldosterone assay (for both feces and blow) that can be used as an alternative measure of adrenal gland activation relative to stress

The Capability of Virtual Reality to Meet Military Requirements (la Capacite de la rea1ite virtuelle a repondre aux besoins militaires)

DTIC Science & Technology

2000-11-01

importance of the sensation of presence, and cybersickness . The third day reviewed assessment methods and applications research. Speakers reviewed...of the sensation of presence, and cybersickness . The third day reviewed assessment methods and applications research. Speakers reviewed existing or...Reality technology. Presentations discussed sensory interfaces, measures of effectiveness, importance of the sensation of presence, and cybersickness

The Role of Timing in Assessing Oral Reading Fluency and Comprehension in Kenya

ERIC Educational Resources Information Center

Piper, Benjamin; Zuilkowski, Stephanie Simmons

2016-01-01

Despite rapid growth in literacy-related programmes and evaluation in sub-Saharan Africa, little critical attention has been paid to the relevance of assumptions that underlie existing assessment methods. This study focuses on the issue of timing in the assessment of oral reading fluency, a critical component of successful reading (Chard, Vaughn,…

Toward Dietary Assessment via Mobile Phone Video Cameras.

PubMed

Chen, Nicholas; Lee, Yun Young; Rabb, Maurice; Schatz, Bruce

2010-11-13

Reliable dietary assessment is a challenging yet essential task for determining general health. Existing efforts are manual, require considerable effort, and are prone to underestimation and misrepresentation of food intake. We propose leveraging mobile phones to make this process faster, easier and automatic. Using mobile phones with built-in video cameras, individuals capture short videos of their meals; our software then automatically analyzes the videos to recognize dishes and estimate calories. Preliminary experiments on 20 typical dishes from a local cafeteria show promising results. Our approach complements existing dietary assessment methods to help individuals better manage their diet to prevent obesity and other diet-related diseases.

An interlaboratory comparison of sediment elutriate preparation and toxicity test methods

EPA Science Inventory

Elutriate bioassays are among numerous methods that exist for assessing the potential toxicity of sediments in aquatic systems. In this study, interlaboratory results were compared from 96-hour Ceriodaphnia dubia and Pimephales promelas static-renewal acute toxicity tests conduct...

The Safety Course Design and Operations of Composite Overwrapped Pressure Vessels (COPV)

NASA Technical Reports Server (NTRS)

Saulsberry, Regor; Prosser, William

2015-01-01

Following a Commercial Launch Vehicle On-Pad COPV (Composite Overwrapped Pressure Vessels) failure, a request was received by the NESC (NASA Engineering and Safety Center) June 14, 2014. An assessment was approved July 10, 2014, to develop and assess the capability of scanning eddy current (EC) nondestructive evaluation (NDE) methods for mapping thickness and inspection for flaws. Current methods could not identify thickness reduction from necking and critical flaw detection was not possible with conventional dye penetrant (PT) methods, so sensitive EC scanning techniques were needed. Developmental methods existed, but had not been fully developed, nor had the requisite capability assessment (i.e., a POD (Probability of Detection) study) been performed.

Application of Key Events and Analysis to Chemical Carcinogens and Noncarcinogens

EPA Science Inventory

The existence of thresholds for toxicants is a matter of debate in chemical rsk assessment and regulation. Current risk assessment methods are based on the assumption that, in the basense of sufficient data, carcinogenesis does not have a threshold, while non-carcinogenic endpoi...

Linking Assessment to Undergraduate Student Capabilities through Portfolio Examination

ERIC Educational Resources Information Center

O'Sullivan, Anthony J.; Harris, Peter; Hughes, Chris S.; Toohey, Susan M.; Balasooriya, Chinthaka; Velan, Gary; Kumar, Rakesh K.; McNeil, H. Patrick

2012-01-01

Portfolios are an established method of assessment, although concerns do exist around their validity for capabilities such as reflection and self-direction. This article describes an e-portfolio which closely aligns learning and reflection to graduate capabilities, incorporating features that address concerns about portfolios. Students are…

A simplified method in comparison with comprehensive interaction incremental dynamic analysis to assess seismic performance of jacket-type offshore platforms

NASA Astrophysics Data System (ADS)

Zolfaghari, M. R.; Ajamy, A.; Asgarian, B.

2015-12-01

The primary goal of seismic reassessment procedures in oil platform codes is to determine the reliability of a platform under extreme earthquake loading. Therefore, in this paper, a simplified method is proposed to assess seismic performance of existing jacket-type offshore platforms (JTOP) in regions ranging from near-elastic to global collapse. The simplified method curve exploits well agreement between static pushover (SPO) curve and the entire summarized interaction incremental dynamic analysis (CI-IDA) curve of the platform. Although the CI-IDA method offers better understanding and better modelling of the phenomenon, it is a time-consuming and challenging task. To overcome the challenges, the simplified procedure, a fast and accurate approach, is introduced based on SPO analysis. Then, an existing JTOP in the Persian Gulf is presented to illustrate the procedure, and finally a comparison is made between the simplified method and CI-IDA results. The simplified method is very informative and practical for current engineering purposes. It is able to predict seismic performance elasticity to global dynamic instability with reasonable accuracy and little computational effort.

Methods for Upgrading an Intramural-Recreational Sports Program: An Agency Report.

ERIC Educational Resources Information Center

Newman, Richard E.; Miller, Michael T.

This study assessed the state of intramural-recreational (IR) programs at Peru State College (Nebraska) and offered suggestions for the improvement of existing IR programs. The existing IR sports program is directed by a part-time adjunct staff member with the aid of student assistants and receives limited support. Upgrading the directorship of…

Refining area of occupancy to address the modifiable areal unit problem in ecology and conservation.

PubMed

Moat, Justin; Bachman, Steven P; Field, Richard; Boyd, Doreen S

2018-05-23

The 'modifiable areal unit problem' is prevalent across many aspects of spatial analysis within ecology and conservation. The problem is particularly manifest when calculating metrics for extinction risk estimation, for example, area of occupancy (AOO). Although embedded into the International Union for the Conservation of Nature (IUCN) Red List criteria, AOO is often not used or is poorly applied. Here we evaluate new and existing methods for calculating AOO from occurrence records and present a method for determining the minimum AOO using a uniform grid. We evaluate the grid cell shape, grid origin and grid rotation with both real-world and simulated data, reviewing the effects on AOO values, and possible impacts for species already assessed on the IUCN Red List. We show that AOO can vary by up to 80% and a ratio of cells to points of 1:1.21 gives the maximum variation in the number of occupied cells. These findings potentially impact 3% of existing species on the IUCN Red List, as well as species not yet assessed. We show that a new method that combines both grid rotation and moving grid origin gives fast, robust and reproducible results and, in the majority of cases, achieves the minimum AOO. As well as reporting minimum AOO, we outline a confidence interval which should be incorporated into existing tools that support species risk assessment. We also make further recommendations for reporting AOO and other areal measurements within ecology, leading to more robust methods for future species risk assessment. This article is protected by copyright. All rights reserved. © 2018 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

Building Inventory Database on the Urban Scale Using GIS for Earthquake Risk Assessment

NASA Astrophysics Data System (ADS)

Kaplan, O.; Avdan, U.; Guney, Y.; Helvaci, C.

2016-12-01

The majority of the existing buildings are not safe against earthquakes in most of the developing countries. Before a devastating earthquake, existing buildings need to be assessed and the vulnerable ones must be determined. Determining the seismic performance of existing buildings which is usually made with collecting the attributes of existing buildings, making the analysis and the necessary queries, and producing the result maps is very hard and complicated procedure that can be simplified with Geographic Information System (GIS). The aim of this study is to produce a building inventory database using GIS for assessing the earthquake risk of existing buildings. In this paper, a building inventory database for 310 buildings, located in Eskisehir, Turkey, was produced in order to assess the earthquake risk of the buildings. The results from this study show that 26% of the buildings have high earthquake risk, 33% of the buildings have medium earthquake risk and the 41% of the buildings have low earthquake risk. The produced building inventory database can be very useful especially for governments in dealing with the problem of determining seismically vulnerable buildings in the large existing building stocks. With the help of this kind of methods, determination of the buildings, which may collapse and cause life and property loss during a possible future earthquake, will be very quick, cheap and reliable.

Methods for assessing the quality of mammalian embryos: How far we are from the gold standard?

PubMed

Rocha, José C; Passalia, Felipe; Matos, Felipe D; Maserati, Marc P; Alves, Mayra F; Almeida, Tamie G de; Cardoso, Bruna L; Basso, Andrea C; Nogueira, Marcelo F G

2016-08-01

Morphological embryo classification is of great importance for many laboratory techniques, from basic research to the ones applied to assisted reproductive technology. However, the standard classification method for both human and cattle embryos, is based on quality parameters that reflect the overall morphological quality of the embryo in cattle, or the quality of the individual embryonic structures, more relevant in human embryo classification. This assessment method is biased by the subjectivity of the evaluator and even though several guidelines exist to standardize the classification, it is not a method capable of giving reliable and trustworthy results. Latest approaches for the improvement of quality assessment include the use of data from cellular metabolism, a new morphological grading system, development kinetics and cleavage symmetry, embryo cell biopsy followed by pre-implantation genetic diagnosis, zona pellucida birefringence, ion release by the embryo cells and so forth. Nowadays there exists a great need for evaluation methods that are practical and non-invasive while being accurate and objective. A method along these lines would be of great importance to embryo evaluation by embryologists, clinicians and other professionals who work with assisted reproductive technology. Several techniques shows promising results in this sense, one being the use of digital images of the embryo as basis for features extraction and classification by means of artificial intelligence techniques (as genetic algorithms and artificial neural networks). This process has the potential to become an accurate and objective standard for embryo quality assessment.

Methods for assessing the quality of mammalian embryos: How far we are from the gold standard?

PubMed Central

Rocha, José C.; Passalia, Felipe; Matos, Felipe D.; Maserati Jr, Marc P.; Alves, Mayra F.; de Almeida, Tamie G.; Cardoso, Bruna L.; Basso, Andrea C.; Nogueira, Marcelo F. G.

2016-01-01

Morphological embryo classification is of great importance for many laboratory techniques, from basic research to the ones applied to assisted reproductive technology. However, the standard classification method for both human and cattle embryos, is based on quality parameters that reflect the overall morphological quality of the embryo in cattle, or the quality of the individual embryonic structures, more relevant in human embryo classification. This assessment method is biased by the subjectivity of the evaluator and even though several guidelines exist to standardize the classification, it is not a method capable of giving reliable and trustworthy results. Latest approaches for the improvement of quality assessment include the use of data from cellular metabolism, a new morphological grading system, development kinetics and cleavage symmetry, embryo cell biopsy followed by pre-implantation genetic diagnosis, zona pellucida birefringence, ion release by the embryo cells and so forth. Nowadays there exists a great need for evaluation methods that are practical and non-invasive while being accurate and objective. A method along these lines would be of great importance to embryo evaluation by embryologists, clinicians and other professionals who work with assisted reproductive technology. Several techniques shows promising results in this sense, one being the use of digital images of the embryo as basis for features extraction and classification by means of artificial intelligence techniques (as genetic algorithms and artificial neural networks). This process has the potential to become an accurate and objective standard for embryo quality assessment. PMID:27584609

What influences the choice of assessment methods in health technology assessments? Statistical analysis of international health technology assessments from 1989 to 2002.

PubMed

Draborg, Eva; Andersen, Christian Kronborg

2006-01-01

Health technology assessment (HTA) has been used as input in decision making worldwide for more than 25 years. However, no uniform definition of HTA or agreement on assessment methods exists, leaving open the question of what influences the choice of assessment methods in HTAs. The objective of this study is to analyze statistically a possible relationship between methods of assessment used in practical HTAs, type of assessed technology, type of assessors, and year of publication. A sample of 433 HTAs published by eleven leading institutions or agencies in nine countries was reviewed and analyzed by multiple logistic regression. The study shows that outsourcing of HTA reports to external partners is associated with a higher likelihood of using assessment methods, such as meta-analysis, surveys, economic evaluations, and randomized controlled trials; and with a lower likelihood of using assessment methods, such as literature reviews and "other methods". The year of publication was statistically related to the inclusion of economic evaluations and shows a decreasing likelihood during the year span. The type of assessed technology was related to economic evaluations with a decreasing likelihood, to surveys, and to "other methods" with a decreasing likelihood when pharmaceuticals were the assessed type of technology. During the period from 1989 to 2002, no major developments in assessment methods used in practical HTAs were shown statistically in a sample of 433 HTAs worldwide. Outsourcing to external assessors has a statistically significant influence on choice of assessment methods.

The Testing Methods and Gender Differences in Multiple-Choice Assessment

NASA Astrophysics Data System (ADS)

Ng, Annie W. Y.; Chan, Alan H. S.

2009-10-01

This paper provides a comprehensive review of the multiple-choice assessment in the past two decades for facilitating people to conduct effective testing in various subject areas. It was revealed that a variety of multiple-choice test methods viz. conventional multiple-choice, liberal multiple-choice, elimination testing, confidence marking, probability testing, and order-of-preference scheme are available for use in assessing subjects' knowledge and decision ability. However, the best multiple-choice test method for use has not yet been identified. The review also indicated that the existence of gender differences in multiple-choice task performance might be due to the test area, instruction/scoring condition, and item difficulty.

Resource-assessment perspectives for unconventional gas systems

USGS Publications Warehouse

Schmoker, J.W.

2002-01-01

Concepts are described for assessing those unconventional gas systems that can also be defined as continous accumulations. Continuous gas accumulations exist more or less independently of the water column and do not owe their existence directly to the bouyancy of gas in water. They cannot be represented in terms of individual, countable fields or pools delineated by downdip water contacts. For these reasons, traditional resource-assessment methods based on estimating the sizes and numbers of undiscovered discrete fields cannot not be applied to continuous accumulations. Specialized assessment methods are required. Unconventional gas systems that are also continous accumulations include coalbed methane, basin-centered gas, so-called tight gas, fractured shale (and chalk) gas, and gas hydrates. Deep-basin and bacterial gas systems may or may not be continuous accumulations, depending on their geologic setting. Two basic resource-assessment approaches have been employed for continous accumulations. The first approach is based on estimates of gas in place. A volumetric estimate of total gas in place is commonly coupled with an overall recovery factor to narrow the assessment scope from a treatment of gas volumes residing in sedimentary strata to a prediction of potential additions to reserves. The second approach is based on the production performance of continous gas reservoirs, as shown empirically by wells and reservoir-simulation models. In these methods, production characteristics (as opposed to gas in place) are the foundation for forecasts of potential additions to reserves.

Development of Novel Noninvasive Methods of Stress Assessment in Baleen Whales

DTIC Science & Technology

2015-09-30

large whales. Few methods exist for assessment of physiological stress levels of free-swimming cetaceans (Amaral 2010, ONR 2010, Hunt et al. 2013...adrenal hormone aldosterone . Our aim in this project is to further develop both techniques - respiratory hormone analysis and fecal hormone analysis...development of a noninvasive aldosterone assay (for both feces and blow) that can be used as an alternative measure of adrenal gland activation relative to

Noise Estimation and Quality Assessment of Gaussian Noise Corrupted Images

NASA Astrophysics Data System (ADS)

Kamble, V. M.; Bhurchandi, K.

2018-03-01

Evaluating the exact quantity of noise present in an image and quality of an image in the absence of reference image is a challenging task. We propose a near perfect noise estimation method and a no reference image quality assessment method for images corrupted by Gaussian noise. The proposed methods obtain initial estimate of noise standard deviation present in an image using the median of wavelet transform coefficients and then obtains a near to exact estimate using curve fitting. The proposed noise estimation method provides the estimate of noise within average error of +/-4%. For quality assessment, this noise estimate is mapped to fit the Differential Mean Opinion Score (DMOS) using a nonlinear function. The proposed methods require minimum training and yields the noise estimate and image quality score. Images from Laboratory for image and Video Processing (LIVE) database and Computational Perception and Image Quality (CSIQ) database are used for validation of the proposed quality assessment method. Experimental results show that the performance of proposed quality assessment method is at par with the existing no reference image quality assessment metric for Gaussian noise corrupted images.

[The methods of assessment of health risk from exposure to radon and radon daughters].

PubMed

Demin, V F; Zhukovskiy, M V; Kiselev, S M

2014-01-01

The critical analysis of existing models of the relationship dose-effect (RDE) for radon exposure on human health has been performed. Conclusion about the necessity and possibility of improving these models has been made. A new improved version ofthe RDE has been developed. A technique for assessing the human health risk of exposure to radon, including the method for estimating of exposure doses of radon, an improved model of RDE, proper methodology risk assessment has been described. Methodology is proposed for the use in the territory of Russia.

Assessment of nonequilibrium radiation computation methods for hypersonic flows

NASA Technical Reports Server (NTRS)

Sharma, Surendra

1993-01-01

The present understanding of shock-layer radiation in the low density regime, as appropriate to hypersonic vehicles, is surveyed. Based on the relative importance of electron excitation and radiation transport, the hypersonic flows are divided into three groups: weakly ionized, moderately ionized, and highly ionized flows. In the light of this division, the existing laboratory and flight data are scrutinized. Finally, an assessment of the nonequilibrium radiation computation methods for the three regimes in hypersonic flows is presented. The assessment is conducted by comparing experimental data against the values predicted by the physical model.

The Impact of Feedback as Formative Assessment on Student Performance

ERIC Educational Resources Information Center

Owen, Leanne

2016-01-01

This article provides an evaluation of the redesign of a research methods course intended to enhance students' learning for understanding and transfer. Drawing on principles of formative assessment from the existing academic literature, the instructor introduced a number of increasingly complex low-stakes assignments for students to complete prior…

Evidence-Based Clinical Voice Assessment: A Systematic Review

ERIC Educational Resources Information Center

Roy, Nelson; Barkmeier-Kraemer, Julie; Eadie, Tanya; Sivasankar, M. Preeti; Mehta, Daryush; Paul, Diane; Hillman, Robert

2013-01-01

Purpose: To determine what research evidence exists to support the use of voice measures in the clinical assessment of patients with voice disorders. Method: The American Speech-Language-Hearing Association (ASHA) National Center for Evidence-Based Practice in Communication Disorders staff searched 29 databases for peer-reviewed English-language…

Using Qualitative Methods for Revising Items in the Hispanic Stress Inventory

ERIC Educational Resources Information Center

Cervantes, Richard C.; Goldbach, Jeremy T.; Padilla, Amado M.

2012-01-01

Despite progress in the development of measures to assess psychosocial stress experiences in the general population, a lack of culturally informed assessment instruments exist to enable clinicians and researchers to detect and accurately diagnosis mental health concerns among Hispanics. The Hispanic Stress Inventory (HSI) was developed…

The Very Essentials of Fitness for Trial Assessment in Canada

ERIC Educational Resources Information Center

Newby, Diana; Faltin, Robert

2008-01-01

Fitness for trial constitutes the most frequent referral to forensic assessment services. Several approaches to this evaluation exist in Canada, including the Fitness Interview Test and Basic Fitness for Trial Test. The following article presents a review of the issues and a method for basic fitness for trial evaluation.

Evaluation of background parenchymal enhancement on breast MRI: a systematic review

PubMed Central

Signori, Alessio; Valdora, Francesca; Rossi, Federica; Calabrese, Massimo; Durando, Manuela; Mariscotto, Giovanna; Tagliafico, Alberto

2017-01-01

Objective: To perform a systematic review of the methods used for background parenchymal enhancement (BPE) evaluation on breast MRI. Methods: Studies dealing with BPE assessment on breast MRI were retrieved from major medical libraries independently by four reviewers up to 6 October 2015. The keywords used for database searching are “background parenchymal enhancement”, “parenchymal enhancement”, “MRI” and “breast”. The studies were included if qualitative and/or quantitative methods for BPE assessment were described. Results: Of the 420 studies identified, a total of 52 articles were included in the systematic review. 28 studies performed only a qualitative assessment of BPE, 13 studies performed only a quantitative assessment and 11 studies performed both qualitative and quantitative assessments. A wide heterogeneity was found in the MRI sequences and in the quantitative methods used for BPE assessment. Conclusion: A wide variability exists in the quantitative evaluation of BPE on breast MRI. More studies focused on a reliable and comparable method for quantitative BPE assessment are needed. Advances in knowledge: More studies focused on a quantitative BPE assessment are needed. PMID:27925480

Hydration in advanced cancer: can bioelectrical impedance analysis improve the evidence base? A systematic review of the literature.

PubMed

Nwosu, Amara Callistus; Mayland, Catriona R; Mason, Stephen R; Khodabukus, Andrew F; Varro, Andrea; Ellershaw, John E

2013-09-01

Decisions surrounding the administration of clinically assisted hydration to patients dying of cancer can be challenging because of the limited understanding of hydration in advanced cancer and a lack of evidence to guide health care professionals. Bioelectrical impedance analysis (BIA) has been used to assess hydration in various patient groupings, but evidence for its use in advanced cancer is limited. To critically appraise existing methods of hydration status assessment in advanced cancer and review the potential for BIA to assess hydration in advanced cancer. Searches were carried out in four electronic databases. A hand search of selected peer-reviewed journals and conference abstracts also was conducted. Studies reporting (de)hydration assessment (physical examination, biochemical measures, symptom assessment, and BIA) in patients with advanced cancer were included. The results highlight how clinical examination and biochemical tests are standard methods of assessing hydration, but limitations exist with these methods in advanced cancer. Furthermore, there is disagreement over the evidence for some commonly associated symptoms with dehydration in cancer. Although there are limitations with using BIA alone to assess hydration in advanced cancer, analysis of BIA raw measurements through the method of bioelectrical impedance vector analysis may have a role in this population. The benefits and burdens of providing clinically assisted hydration to patients dying of cancer are unclear. Bioelectrical impedance vector analysis shows promise as a hydration assessment tool but requires further study in advanced cancer. Innovative methodologies for research are required to add to the evidence base and ultimately improve the care for the dying. Copyright © 2013 U.S. Cancer Pain Relief Committee. Published by Elsevier Inc. All rights reserved.

Integration of existing systematic reviews into new reviews: identification of guidance needs

PubMed Central

2014-01-01

Background An exponential increase in the number of systematic reviews published, and constrained resources for new reviews, means that there is an urgent need for guidance on explicitly and transparently integrating existing reviews into new systematic reviews. The objectives of this paper are: 1) to identify areas where existing guidance may be adopted or adapted, and 2) to suggest areas for future guidance development. Methods We searched documents and websites from healthcare focused systematic review organizations to identify and, where available, to summarize relevant guidance on the use of existing systematic reviews. We conducted informational interviews with members of Evidence-based Practice Centers (EPCs) to gather experiences in integrating existing systematic reviews, including common issues and challenges, as well as potential solutions. Results There was consensus among systematic review organizations and the EPCs about some aspects of incorporating existing systematic reviews into new reviews. Current guidance may be used in assessing the relevance of prior reviews and in scanning references of prior reviews to identify studies for a new review. However, areas of challenge remain. Areas in need of guidance include how to synthesize, grade the strength of, and present bodies of evidence composed of primary studies and existing systematic reviews. For instance, empiric evidence is needed regarding how to quality check data abstraction and when and how to use study-level risk of bias assessments from prior reviews. Conclusions There remain areas of uncertainty for how to integrate existing systematic reviews into new reviews. Methods research and consensus processes among systematic review organizations are needed to develop guidance to address these challenges. PMID:24956937

Capillary density: An important parameter in nailfold capillaroscopy.

PubMed

Emrani, Zahra; Karbalaie, Abdolamir; Fatemi, Alimohammad; Etehadtavakol, Mahnaz; Erlandsson, Björn-Erik

2017-01-01

Nailfold capillaroscopy is one of the various noninvasive bioengineering methods used to investigate skin microcirculation. It is an effective examination for assessing microvascular changes in the peripheral circulation; hence it has a significant role for the diagnosis of Systemic sclerosis with the classic changes of giant capillaries as well as the decline in capillary density with capillary dropout. The decline in capillary density is one of microangiopathic features existing in connective tissue disease. It is detectable with nailfold capillaroscopy. This parameter is assessed by applying quantitative measurement. In this article, we reviewed a common method for calculating the capillary density and the relation between the number of capillaries as well as the existence of digital ulcers, pulmonary arterial hypertension, autoantibodies, scleroderma patterns and different scoring system. Copyright © 2016 Elsevier Inc. All rights reserved.

A novel no-reference objective stereoscopic video quality assessment method based on visual saliency analysis

NASA Astrophysics Data System (ADS)

Yang, Xinyan; Zhao, Wei; Ye, Long; Zhang, Qin

2017-07-01

This paper proposes a no-reference objective stereoscopic video quality assessment method with the motivation that making the effect of objective experiments close to that of subjective way. We believe that the image regions with different visual salient degree should not have the same weights when designing an assessment metric. Therefore, we firstly use GBVS algorithm to each frame pairs and separate both the left and right viewing images into the regions with strong, general and week saliency. Besides, local feature information like blockiness, zero-crossing and depth are extracted and combined with a mathematical model to calculate a quality assessment score. Regions with different salient degree are assigned with different weights in the mathematical model. Experiment results demonstrate the superiority of our method compared with the existed state-of-the-art no-reference objective Stereoscopic video quality assessment methods.

Criteria for assessing the quality of mHealth apps: a systematic review.

PubMed

Nouri, Rasool; R Niakan Kalhori, Sharareh; Ghazisaeedi, Marjan; Marchand, Guillaume; Yasini, Mobin

2018-05-16

Review the existing studies including an assessment tool/method to assess the quality of mHealth apps; extract their criteria; and provide a classification of the collected criteria. In accordance with the PRISMA statement, a literature search was conducted in MEDLINE, EMBase, ISI and Scopus for English language citations published from January 1, 2008 to December 22, 2016 for studies including tools or methods for quality assessment of mHealth apps. Two researchers screened the titles and abstracts of all retrieved citations against the inclusion and exclusion criteria. The full text of relevant papers was then individually examined by the same researchers. A senior researcher resolved eventual disagreements and confirmed the relevance of all included papers. The authors, date of publication, subject fields of target mHealth apps, development method, and assessment criteria were extracted from each paper. The extracted assessment criteria were then reviewed, compared, and classified by an expert panel of two medical informatics specialists and two health information management specialists. Twenty-three papers were included in the review. Thirty-eight main classes of assessment criteria were identified. These were reorganized by expert panel into 7 main classes (Design, Information/Content, Usability, Functionality, Ethical Issues, Security and Privacy, and User-perceived value) with 37 sub-classes of criteria. There is a wide heterogeneity in assessment criteria for mHealth apps. It is necessary to define the exact meanings and degree of distinctness of each criterion. This will help to improve the existing tools and may lead to achieve a better comprehensive mHealth app assessment tool.

Mineral-Resource Assessment of Northern Nye County, Nevada - A Progress Report

USGS Publications Warehouse

Ludington, Steve; John, David A.; Muntean, John L.; Hanson, Andrew D.; Castor, Stephen B.; Henry, Christopher D.; Wintzer, Niki; Cline, Jean S.; Simon, Adam C.

2009-01-01

The U.S. Geological Survey (USGS), University of Nevada, Las Vegas (UNLV), and Nevada Bureau of Mines and Geology (NBMG), which is a part of the University of Nevada, Reno (UNR), have completed the first year of data collection and analysis in preparation for a new mineral- and energy-resource assessment of northern Nye County, Nevada. This report provides information about work completed before October 1, 2009. Existing data are being compiled, including geology, geochemistry, geophysics, and mineral-deposit information. Field studies are underway, which are primarily designed to address issues raised during the review of existing information. In addition, new geochemical studies are in progress, including reanalyzing existing stream-sediment samples with modern methods, and analyzing metalliferous black shales.

Automation is an Effective Way to Improve Quality of Verification (Calibration) of Measuring Instruments

NASA Astrophysics Data System (ADS)

Golobokov, M.; Danilevich, S.

2018-04-01

In order to assess calibration reliability and automate such assessment, procedures for data collection and simulation study of thermal imager calibration procedure have been elaborated. The existing calibration techniques do not always provide high reliability. A new method for analyzing the existing calibration techniques and developing new efficient ones has been suggested and tested. A type of software has been studied that allows generating instrument calibration reports automatically, monitoring their proper configuration, processing measurement results and assessing instrument validity. The use of such software allows reducing man-hours spent on finalization of calibration data 2 to 5 times and eliminating a whole set of typical operator errors.

STAKEHOLDER INVOLVEMENT THROUGHOUT HEALTH TECHNOLOGY ASSESSMENT: AN EXAMPLE FROM PALLIATIVE CARE.

PubMed

Brereton, Louise; Wahlster, Philip; Mozygemba, Kati; Lysdahl, Kristin Bakke; Burns, Jake; Polus, Stephanie; Tummers, Marcia; Refolo, Pietro; Sacchini, Dario; Leppert, Wojciech; Chilcott, James; Ingleton, Christine; Gardiner, Clare; Goyder, Elizabeth

2017-01-01

Internationally, funders require stakeholder involvement throughout health technology assessment (HTA). We report successes, challenges, and lessons learned from extensive stakeholder involvement throughout a palliative care case study that demonstrates new concepts and methods for HTA. A 5-step "INTEGRATE-HTA Model" developed within the INTEGRATE-HTA project guided the case study. Using convenience or purposive sampling or directly / indirectly identifying and approaching individuals / groups, stakeholders participated in qualitative research or consultation meetings. During scoping, 132 stakeholders, aged ≥ 18 years in seven countries (England, Italy, Germany, The Netherlands, Norway, Lithuania, and Poland), highlighted key issues in palliative care that assisted identification of the intervention and comparator. Subsequently stakeholders in four countries participated in face-face, telephone and / or video Skype meetings to inform evidence collection and / or review assessment results. An applicability assessment to identify contextual and implementation barriers and enablers for the case study findings involved twelve professionals in the three countries. Finally, thirteen stakeholders participated in a mock decision-making meeting in England. Views about the best methods of stakeholder involvement vary internationally. Stakeholders make valuable contributions in all stages of HTA; assisting decision making about interventions, comparators, research questions; providing evidence and insights into findings, gap analyses and applicability assessments. Key challenges exist regarding inclusivity, time, and resource use. Stakeholder involvement is feasible and worthwhile throughout HTA, sometimes providing unique insights. Various methods can be used to include stakeholders, although challenges exist. Recognition of stakeholder expertise and further guidance about stakeholder consultation methods is needed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Van Passel, Steven, E-mail: Steven.vanpassel@uhasselt.be; University of Antwerp, Department Bioscience Engineering, Groenenborgerlaan 171, 2020 Antwerp; Meul, Marijke

Sustainability assessment is needed to build sustainable farming systems. A broad range of sustainability concepts, methodologies and applications already exists. They differ in level, focus, orientation, measurement, scale, presentation and intended end-users. In this paper we illustrate that a smart combination of existing methods with different levels of application can make sustainability assessment more profound, and that it can broaden the insights of different end-user groups. An overview of sustainability assessment tools on different levels and for different end-users shows the complementarities and the opportunities of using different methods. In a case-study, a combination of the sustainable value approach (SVA)more » and MOTIFS is used to perform a sustainability evaluation of farming systems in Flanders. SVA is used to evaluate sustainability at sector level, and is especially useful to support policy makers, while MOTIFS is used to support and guide farmers towards sustainability at farm level. The combined use of the two methods with complementary goals can widen the insights of both farmers and policy makers, without losing the particularities of the different approaches. To stimulate and support further research and applications, we propose guidelines for multilevel and multi-user sustainability assessments. - Highlights: Black-Right-Pointing-Pointer We give an overview of sustainability assessment tools for agricultural systems. Black-Right-Pointing-Pointer SVA and MOTIFS are used to evaluate the sustainability of dairy farming in Flanders. Black-Right-Pointing-Pointer Combination of methods with different levels broadens the insights of different end-user groups. Black-Right-Pointing-Pointer We propose guidelines for multilevel and multi-user sustainability assessments.« less

Rapid assessment of rice seed availability for wildlife in harvested fields

USGS Publications Warehouse

Halstead, B.J.; Miller, M.R.; Casazza, Michael L.; Coates, P.S.; Farinha, M.A.; Benjamin, Gustafson K.; Yee, J.L.; Fleskes, J.P.

2011-01-01

Rice seed remaining in commercial fields after harvest (waste rice) is a critical food resource for wintering waterfowl in rice-growing regions of North America. Accurate and precise estimates of the seed mass density of waste rice are essential for planning waterfowl wintering habitat extents and management. In the Sacramento Valley of California, USA, the existing method for obtaining estimates of availability of waste rice in harvested fields produces relatively precise estimates, but the labor-, time-, and machineryintensive process is not practical for routine assessments needed to examine long-term trends in waste rice availability. We tested several experimental methods designed to rapidly derive estimates that would not be burdened with disadvantages of the existing method. We first conducted a simulation study of the efficiency of each method and then conducted field tests. For each approach, methods did not vary in root mean squared error, although some methods did exhibit bias for both simulations and field tests. Methods also varied substantially in the time to conduct each sample and in the number of samples required to detect a standard trend. Overall, modified line-intercept methods performed well for estimating the density of rice seeds. Waste rice in the straw, although not measured directly, can be accounted for by a positive relationship with density of rice on the ground. Rapid assessment of food availability is a useful tool to help waterfowl managers establish and implement wetland restoration and agricultural habitat-enhancement goals for wintering waterfowl. ?? 2011 The Wildlife Society.

Assessing aspects of creativity in deaf and hearing high school students.

PubMed

Stanzione, Christopher M; Perez, Susan M; Lederberg, Amy R

2013-04-01

To address the paucity of current research on the development of creativity in deaf students, and to extend existing research to adolescents, the present study investigated divergent thinking, a method of assessing creativity, in both deaf and hearing adolescents. We assessed divergent thinking in two domains, figural and verbal, while also adjusting the instructional method in written format, sign language, or spoken English. Deaf students' performance was equal to, or more creative than, hearing students on the figural assessment of divergent thinking, but less creative on the verbal assessment. Additional studies should be conducted to determine whether this was an anomalous finding or one that might contribute to hypotheses yielding effective interventions.

Research on assessment methods for urban public transport development in China.

PubMed

Zou, Linghong; Dai, Hongna; Yao, Enjian; Jiang, Tian; Guo, Hongwei

2014-01-01

In recent years, with the rapid increase in urban population, the urban travel demands in Chinese cities have been increasing dramatically. As a result, developing comprehensive urban transport systems becomes an inevitable choice to meet the growing urban travel demands. In urban transport systems, public transport plays the leading role to promote sustainable urban development. This paper aims to establish an assessment index system for the development level of urban public transport consisting of a target layer, a criterion layer, and an index layer. Review on existing literature shows that methods used in evaluating urban public transport structure are dominantly qualitative. To overcome this shortcoming, fuzzy mathematics method is used for describing qualitative issues quantitatively, and AHP (analytic hierarchy process) is used to quantify expert's subjective judgment. The assessment model is established based on the fuzzy AHP. The weight of each index is determined through the AHP and the degree of membership of each index through the fuzzy assessment method to obtain the fuzzy synthetic assessment matrix. Finally, a case study is conducted to verify the rationality and practicability of the assessment system and the proposed assessment method.

A Review of Treatment Adherence Measurement Methods

ERIC Educational Resources Information Center

Schoenwald, Sonja K.; Garland, Ann F.

2013-01-01

Fidelity measurement is critical for testing the effectiveness and implementation in practice of psychosocial interventions. Adherence is a critical component of fidelity. The purposes of this review were to catalogue adherence measurement methods and assess existing evidence for the valid and reliable use of the scores that they generate and the…

Upgrading in an Industrial Setting. Final Report.

ERIC Educational Resources Information Center

Russell, Wendell

The project objectives were: (1) to assess existing industrial upgrading practices in an Atomic Energy Commission contractor organization, (2) to design new alternative upgrading methods, (3) to experiment with new upgrading methods, (4) to plan for utilization of proven upgrading programs, and (5) to document and disseminate activities. A twelve…

Accelerated Colorimetric Micro-assay for Screening Mold Inhibitors

Treesearch

Carol A. Clausen; Vina W. Yang

2014-01-01

Rapid quantitative laboratory test methods are needed to screen potential antifungal agents. Existing laboratory test methods are relatively time consuming, may require specialized test equipment and rely on subjective visual ratings. A quantitative, colorimetric micro-assay has been developed that uses XTT tetrazolium salt to metabolically assess mold spore...

ENERGY-BASED LAND USE PREDICTORS OF PROXIMAL FACTORS AND BENTHIC DIATOM COMPOSITION IN FLORIDA FRESHWATER MARSHES

EPA Science Inventory

The development of rigorous biological assessments is dependent upon well-constructed abscissa, and various methods, both subjective and objective, exist to measure expected impairment at both the landscape and local scale. A new, landscape-scale method has recently been offered...

A New Method for Generating Distribution of Biomonitoring Equivalents to Support Exposure Assessment and Prioritization

EPA Science Inventory

Biomonitoring data are now available for hundreds of chemicals through state and national health surveys. Exposure guidance values also exist for many of these chemicals. Several methods are frequently used to evaluate biomarker data with respect to a guidance value. The “biomoni...

Virus Particle Detection by Convolutional Neural Network in Transmission Electron Microscopy Images.

PubMed

Ito, Eisuke; Sato, Takaaki; Sano, Daisuke; Utagawa, Etsuko; Kato, Tsuyoshi

2018-06-01

A new computational method for the detection of virus particles in transmission electron microscopy (TEM) images is presented. Our approach is to use a convolutional neural network that transforms a TEM image to a probabilistic map that indicates where virus particles exist in the image. Our proposed approach automatically and simultaneously learns both discriminative features and classifier for virus particle detection by machine learning, in contrast to existing methods that are based on handcrafted features that yield many false positives and require several postprocessing steps. The detection performance of the proposed method was assessed against a dataset of TEM images containing feline calicivirus particles and compared with several existing detection methods, and the state-of-the-art performance of the developed method for detecting virus was demonstrated. Since our method is based on supervised learning that requires both the input images and their corresponding annotations, it is basically used for detection of already-known viruses. However, the method is highly flexible, and the convolutional networks can adapt themselves to any virus particles by learning automatically from an annotated dataset.

Current limitations and recommendations to improve testing for the environmental assessment of endocrine active substances

USGS Publications Warehouse

Coady, Katherine K.; Biever, Ronald C.; Denslow, Nancy D.; Gross, Melanie; Guiney, Patrick D.; Holbech, Henrik; Karouna-Renier, Natalie K.; Katsiadaki, Ioanna; Krueger, Hank; Levine, Steven L.; Maack, Gerd; Williams, Mike; Wolf, Jeffrey C.; Ankley, Gerald T.

2017-01-01

In the present study, existing regulatory frameworks and test systems for assessing potential endocrine active chemicals are described, and associated challenges are discussed, along with proposed approaches to address these challenges. Regulatory frameworks vary somewhat across geographies, but all basically evaluate whether a chemical possesses endocrine activity and whether this activity can result in adverse outcomes either to humans or to the environment. Current test systems include in silico, in vitro, and in vivo techniques focused on detecting potential endocrine activity, and in vivo tests that collect apical data to detect possible adverse effects. These test systems are currently designed to robustly assess endocrine activity and/or adverse effects in the estrogen, androgen, and thyroid hormone signaling pathways; however, there are some limitations of current test systems for evaluating endocrine hazard and risk. These limitations include a lack of certainty regarding: 1) adequately sensitive species and life stages; 2) mechanistic endpoints that are diagnostic for endocrine pathways of concern; and 3) the linkage between mechanistic responses and apical, adverse outcomes. Furthermore, some existing test methods are resource intensive with regard to time, cost, and use of animals. However, based on recent experiences, there are opportunities to improve approaches to and guidance for existing test methods and to reduce uncertainty. For example, in vitro high-throughput screening could be used to prioritize chemicals for testing and provide insights as to the most appropriate assays for characterizing hazard and risk. Other recommendations include adding endpoints for elucidating connections between mechanistic effects and adverse outcomes, identifying potentially sensitive taxa for which test methods currently do not exist, and addressing key endocrine pathways of possible concern in addition to those associated with estrogen, androgen, and thyroid signaling. 

Assessing the Psychometric Properties of Kember and Leung's Reflection Questionnaire

ERIC Educational Resources Information Center

Lethbridge, Kristen; Andrusyszyn, Mary-Anne; Iwasiw, Carroll; Laschinger, Heather K. S.; Fernando, Rajulton

2013-01-01

Reflective thinking is often stated as a learning outcome of baccalaureate nursing education, and as a characteristic of a competent professional; however, no consistent method exists to assess the extent to which students engage in reflective thinking. To address this need, Kember and Leung developed and tested a self-report questionnaire based…

The Identification and Assessment of Late-Life ADHD in Memory Clinics

ERIC Educational Resources Information Center

Fischer, Barbara L.; Gunter-Hunt, Gail; Steinhafel, Courtney Holm; Howell, Timothy

2012-01-01

Objective: Little data exist about ADHD in late life. While evaluating patients' memory problems, the memory clinic staff has periodically identified ADHD in previously undiagnosed older adults. The authors conducted a survey to assess the extent to which other memory clinics view ADHD as a relevant clinical issue. Method: The authors developed…

Assessing the New Competencies for Resident Education: A Model from an Emergency Medicine Program.

ERIC Educational Resources Information Center

Reisdorff, Earl J.; Hayes, Oliver W.; Carlson, Dale J.; Walker, Gregory L.

2001-01-01

Based on the experience of Michigan State University's emergency medicine residency program, proposes a practical method for modifying an existing student evaluation format. The model provides a template other programs could use in assessing residents' acquisition of the knowledge, skills, and attitudes reflected in the six general competencies…

Evaluating the Strength of School Tobacco Policies: The Development of a Practical Rating System

ERIC Educational Resources Information Center

Boyce, Jennifer C.; Mueller, Nancy B.; Hogan-Watts, Melissa; Luke, Douglas A.

2009-01-01

Background: School tobacco control policies vary widely in their strength, extensiveness, and enforcement. Currently, no standardized method exists to assess the comprehensiveness of school tobacco policies. The purpose of this study was to develop a new practical rating system for school tobacco policies, assess its reliability, and present…

Assessing ADHD in Latino Families: Evidence for Moving beyond Symptomatology

ERIC Educational Resources Information Center

Gerdes, Alyson C.; Lawton, Kathryn E.; Haack, Lauren M.; Hurtado, Gabriela Dieguez

2013-01-01

Objective: In an effort to combat the mental health disparities that exist among Latinos, the current study aimed to add to our knowledge related to culturally appropriate assessments for Latino children presenting with ADHD. Method: As part of a larger study, a community sample of 68 Spanish-speaking, Latino parents completed the Spanish…

Review of laboratory-based terrestrial bioaccumulation assessment approaches for organic chemicals: Current status and future possibilities.

PubMed

Hoke, Robert; Huggett, Duane; Brasfield, Sandra; Brown, Becky; Embry, Michelle; Fairbrother, Anne; Kivi, Michelle; Paumen, Miriam Leon; Prosser, Ryan; Salvito, Dan; Scroggins, Rick

2016-01-01

In the last decade, interest has been renewed in approaches for the assessment of the bioaccumulation potential of chemicals, principally driven by the need to evaluate large numbers of chemicals as part of new chemical legislation, while reducing vertebrate test organism use called for in animal welfare legislation. This renewed interest has inspired research activities and advances in bioaccumulation science for neutral organic chemicals in aquatic environments. In January 2013, ILSI Health and Environmental Sciences Institute convened experts to identify the state of the science and existing shortcomings in terrestrial bioaccumulation assessment of neutral organic chemicals. Potential modifications to existing laboratory methods were identified, including areas in which new laboratory approaches or test methods could be developed to address terrestrial bioaccumulation. The utility of "non-ecotoxicity" data (e.g., mammalian laboratory data) was also discussed. The highlights of the workshop discussions are presented along with potential modifications in laboratory approaches and new test guidelines that could be used for assessing the bioaccumulation of chemicals in terrestrial organisms. © 2015 SETAC.

Using Discrete Choice Experiments to Inform the Benefit-Risk Assessment of Medicines: Are We Ready Yet?

PubMed

Vass, Caroline M; Payne, Katherine

2017-09-01

There is emerging interest in the use of discrete choice experiments as a means of quantifying the perceived balance between benefits and risks (quantitative benefit-risk assessment) of new healthcare interventions, such as medicines, under assessment by regulatory agencies. For stated preference data on benefit-risk assessment to be used in regulatory decision making, the methods to generate these data must be valid, reliable and capable of producing meaningful estimates understood by decision makers. Some reporting guidelines exist for discrete choice experiments, and for related methods such as conjoint analysis. However, existing guidelines focus on reporting standards, are general in focus and do not consider the requirements for using discrete choice experiments specifically for quantifying benefit-risk assessments in the context of regulatory decision making. This opinion piece outlines the current state of play in using discrete choice experiments for benefit-risk assessment and proposes key areas needing to be addressed to demonstrate that discrete choice experiments are an appropriate and valid stated preference elicitation method in this context. Methodological research is required to establish: how robust the results of discrete choice experiments are to formats and methods of risk communication; how information in the discrete choice experiment can be presented effectually to respondents; whose preferences should be elicited; the correct underlying utility function and analytical model; the impact of heterogeneity in preferences; and the generalisability of the results. We believe these methodological issues should be addressed, alongside developing a 'reference case', before agencies can safely and confidently use discrete choice experiments for quantitative benefit-risk assessment in the context of regulatory decision making for new medicines and healthcare products.

Assessing the environmental impacts of freshwater consumption in LCA.

PubMed

Pfister, Stephan; Koehler, Annette; Hellweg, Stefanie

2009-06-01

A method for assessing the environmental impacts of freshwater consumption was developed. This method considers damages to three areas of protection: human health, ecosystem quality, and resources. The method can be used within most existing life-cycle impact assessment (LCIA) methods. The relative importance of water consumption was analyzed by integrating the method into the Eco-indicator-99 LCIA method. The relative impact of water consumption in LCIA was analyzed with a case study on worldwide cotton production. The importance of regionalized characterization factors for water use was also examined in the case study. In arid regions, water consumption may dominate the aggregated life-cycle impacts of cotton-textile production. Therefore, the consideration of water consumption is crucial in life-cycle assessment (LCA) studies that include water-intensive products, such as agricultural goods. A regionalized assessment is necessary, since the impacts of water use vary greatly as a function of location. The presented method is useful for environmental decision-support in the production of water-intensive products as well as for environmentally responsible value-chain management.

Developing an Engineering Design Process Assessment using Mixed Methods.

PubMed

Wind, Stefanie A; Alemdar, Meltem; Lingle, Jeremy A; Gale, Jessica D; Moore, Roxanne A

Recent reforms in science education worldwide include an emphasis on engineering design as a key component of student proficiency in the Science, Technology, Engineering, and Mathematics disciplines. However, relatively little attention has been directed to the development of psychometrically sound assessments for engineering. This study demonstrates the use of mixed methods to guide the development and revision of K-12 Engineering Design Process (EDP) assessment items. Using results from a middle-school EDP assessment, this study illustrates the combination of quantitative and qualitative techniques to inform item development and revisions. Overall conclusions suggest that the combination of quantitative and qualitative evidence provides an in-depth picture of item quality that can be used to inform the revision and development of EDP assessment items. Researchers and practitioners can use the methods illustrated here to gather validity evidence to support the interpretation and use of new and existing assessments.

Ecological Momentary Assessment and Alcohol Use Disorder Treatment

PubMed Central

Morgenstern, Jon; Kuerbis, Alexis; Muench, Frederick

2014-01-01

The ability to capture real-time data on human behavior inexpensively, efficiently, and accurately holds promise to transform and broaden our understanding of many areas of health science. One approach to acquiring this type of real-time data is ecological momentary assessment (EMA). This method has been used to collect data in many domains of addiction research, including research on the treatment of alcohol use disorders (AUDs). Empirical evidence supports the hypothesis that use of EMA can improve the quality of AUD treatment research when compared with standard assessment methods because it provides more accurate reporting, allows investigators to examine the dynamic unfolding of the behavior change process at an individual level, and can be used to augment and improve clinical assessment and treatment. Overall, the existing literature provides strong support for the advantages of EMA when combined with standard assessment of addictive behaviors in general. Nevertheless, use of EMA in AUD treatment research thus far has been limited, especially in the area of research on mechanisms of behavior change. Existing research indicates, however, that EMA can be used to deliver tailored feedback as a novel and potentially transformative approach to improving AUD treatment. This research area clearly warrants additional future efforts. PMID:26259004

Potential for Integrating Diffusion of Innovation Principles into Life Cycle Assessment of Emerging Technologies.

PubMed

Sharp, Benjamin E; Miller, Shelie A

2016-03-15

Life cycle assessment (LCA) measures cradle-to-grave environmental impacts of a product. To assess impacts of an emerging technology, LCA should be coupled with additional methods that estimate how that technology might be deployed. The extent and manner that an emerging technology diffuses throughout a region shapes the magnitude and type of environmental impacts. Diffusion of innovation is an established field of research that analyzes the adoption of new innovations, and its principles can be used to construct scenario models that enhance LCA of emerging technologies. Integrating diffusion modeling techniques with an LCA of emerging technology can provide estimates for the extent of market penetration, the displacement of existing systems, and the rate of adoption. Two general perspectives of application are macro-level diffusion models that use a function of time to represent adoption, and microlevel diffusion models that simulate adoption through interactions of individuals. Incorporating diffusion of innovation concepts complement existing methods within LCA to inform proactive environmental management of emerging technologies.

New Internet search volume-based weighting method for integrating various environmental impacts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ji, Changyoon, E-mail: changyoon@yonsei.ac.kr; Hong, Taehoon, E-mail: hong7@yonsei.ac.kr

Weighting is one of the steps in life cycle impact assessment that integrates various characterized environmental impacts as a single index. Weighting factors should be based on the society's preferences. However, most previous studies consider only the opinion of some people. Thus, this research proposes a new weighting method that determines the weighting factors of environmental impact categories by considering public opinion on environmental impacts using the Internet search volumes for relevant terms. To validate the new weighting method, the weighting factors for six environmental impacts calculated by the new weighting method were compared with the existing weighting factors. Themore » resulting Pearson's correlation coefficient between the new and existing weighting factors was from 0.8743 to 0.9889. It turned out that the new weighting method presents reasonable weighting factors. It also requires less time and lower cost compared to existing methods and likewise meets the main requirements of weighting methods such as simplicity, transparency, and reproducibility. The new weighting method is expected to be a good alternative for determining the weighting factor. - Highlight: • A new weighting method using Internet search volume is proposed in this research. • The new weighting method reflects the public opinion using Internet search volume. • The correlation coefficient between new and existing weighting factors is over 0.87. • The new weighting method can present the reasonable weighting factors. • The proposed method can be a good alternative for determining the weighting factors.« less

Assessing Mediational Models: Testing and Interval Estimation for Indirect Effects.

PubMed

Biesanz, Jeremy C; Falk, Carl F; Savalei, Victoria

2010-08-06

Theoretical models specifying indirect or mediated effects are common in the social sciences. An indirect effect exists when an independent variable's influence on the dependent variable is mediated through an intervening variable. Classic approaches to assessing such mediational hypotheses ( Baron & Kenny, 1986 ; Sobel, 1982 ) have in recent years been supplemented by computationally intensive methods such as bootstrapping, the distribution of the product methods, and hierarchical Bayesian Markov chain Monte Carlo (MCMC) methods. These different approaches for assessing mediation are illustrated using data from Dunn, Biesanz, Human, and Finn (2007). However, little is known about how these methods perform relative to each other, particularly in more challenging situations, such as with data that are incomplete and/or nonnormal. This article presents an extensive Monte Carlo simulation evaluating a host of approaches for assessing mediation. We examine Type I error rates, power, and coverage. We study normal and nonnormal data as well as complete and incomplete data. In addition, we adapt a method, recently proposed in statistical literature, that does not rely on confidence intervals (CIs) to test the null hypothesis of no indirect effect. The results suggest that the new inferential method-the partial posterior p value-slightly outperforms existing ones in terms of maintaining Type I error rates while maximizing power, especially with incomplete data. Among confidence interval approaches, the bias-corrected accelerated (BC a ) bootstrapping approach often has inflated Type I error rates and inconsistent coverage and is not recommended; In contrast, the bootstrapped percentile confidence interval and the hierarchical Bayesian MCMC method perform best overall, maintaining Type I error rates, exhibiting reasonable power, and producing stable and accurate coverage rates.

A method based on IHS cylindrical transform model for quality assessment of image fusion

NASA Astrophysics Data System (ADS)

Zhu, Xiaokun; Jia, Yonghong

2005-10-01

Image fusion technique has been widely applied to remote sensing image analysis and processing, and methods for quality assessment of image fusion in remote sensing have also become the research issues at home and abroad. Traditional assessment methods combine calculation of quantitative indexes and visual interpretation to compare fused images quantificationally and qualitatively. However, in the existing assessment methods, there are two defects: on one hand, most imdexes lack the theoretic support to compare different fusion methods. On the hand, there is not a uniform preference for most of the quantitative assessment indexes when they are applied to estimate the fusion effects. That is, the spatial resolution and spectral feature could not be analyzed synchronously by these indexes and there is not a general method to unify the spatial and spectral feature assessment. So in this paper, on the basis of the approximate general model of four traditional fusion methods, including Intensity Hue Saturation(IHS) triangle transform fusion, High Pass Filter(HPF) fusion, Principal Component Analysis(PCA) fusion, Wavelet Transform(WT) fusion, a correlation coefficient assessment method based on IHS cylindrical transform is proposed. By experiments, this method can not only get the evaluation results of spatial and spectral features on the basis of uniform preference, but also can acquire the comparison between fusion image sources and fused images, and acquire differences among fusion methods. Compared with the traditional assessment methods, the new methods is more intuitionistic, and in accord with subjective estimation.

Validity and Reliability of the "Behavior Problems Inventory," the "Aberrant Behavior Checklist," and the "Repetitive Behavior Scale--Revised" among Infants and Toddlers at Risk for Intellectual or Developmental Disabilities: A Multi-Method Assessment Approach

ERIC Educational Resources Information Center

Rojahn, Johannes; Schroeder, Stephen R.; Mayo-Ortega, Liliana; Oyama-Ganiko, Rosao; LeBlanc, Judith; Marquis, Janet; Berke, Elizabeth

2013-01-01

Reliable and valid assessment of aberrant behaviors is essential in empirically verifying prevention and intervention for individuals with intellectual or developmental disabilities (IDD). Few instruments exist which assess behavior problems in infants. The current longitudinal study examined the performance of three behavior-rating scales for…

Reevaluation of air surveillance station siting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abbott, K.; Jannik, T.

2016-07-06

DOE Technical Standard HDBK-1216-2015 (DOE 2015) recommends evaluating air-monitoring station placement using the analytical method developed by Waite. The technique utilizes wind rose and population distribution data in order to determine a weighting factor for each directional sector surrounding a nuclear facility. Based on the available resources (number of stations) and a scaling factor, this weighting factor is used to determine the number of stations recommended to be placed in each sector considered. An assessment utilizing this method was performed in 2003 to evaluate the effectiveness of the existing SRS air-monitoring program. The resulting recommended distribution of air-monitoring stations wasmore » then compared to that of the existing site perimeter surveillance program. The assessment demonstrated that the distribution of air-monitoring stations at the time generally agreed with the results obtained using the Waite method; however, at the time new stations were established in Barnwell and in Williston in order to meet requirements of DOE guidance document EH-0173T.« less

Compensating for Electrode Polarization in Dielectric Spectroscopy Studies of Colloidal Suspensions: Theoretical Assessment of Existing Methods

PubMed Central

Chassagne, Claire; Dubois, Emmanuelle; Jiménez, María L.; van der Ploeg, J. P. M; van Turnhout, Jan

2016-01-01

Dielectric spectroscopy can be used to determine the dipole moment of colloidal particles from which important interfacial electrokinetic properties, for instance their zeta potential, can be deduced. Unfortunately, dielectric spectroscopy measurements are hampered by electrode polarization (EP). In this article, we review several procedures to compensate for this effect. First EP in electrolyte solutions is described: the complex conductivity is derived as function of frequency, for two cell geometries (planar and cylindrical) with blocking electrodes. The corresponding equivalent circuit for the electrolyte solution is given for each geometry. This equivalent circuit model is extended to suspensions. The complex conductivity of a suspension, in the presence of EP, is then calculated from the impedance. Different methods for compensating for EP are critically assessed, with the help of the theoretical findings. Their limit of validity is given in terms of characteristic frequencies. We can identify with one of these frequencies the frequency range within which data uncorrected for EP may be used to assess the dipole moment of colloidal particles. In order to extract this dipole moment from the measured data, two methods are reviewed: one is based on the use of existing models for the complex conductivity of suspensions, the other is the logarithmic derivative method. An extension to multiple relaxations of the logarithmic derivative method is proposed. PMID:27486575

Assessment of Entrepreneurial Territorial Attractiveness by the Ranking Method

ERIC Educational Resources Information Center

Gavrilova, Marina A.; Shepelev, Victor M.; Kosyakova, Inessa V.; Belikova, Lyudmila F.; Chistik, Olga F.

2016-01-01

The relevance of the researched problem is caused by existence of differentiation in development of separate regional units (urban districts and municipalities) within the region. The aim of this article is to offer a method, which determines the level of differentiation in development of various components of the region, and also in producing a…

Beyond Instrumentation: Redesigning Measures and Methods for Evaluating the Graduate College Experience

ERIC Educational Resources Information Center

Hardré, Patricia L.; Hackett, Shannon

2015-01-01

This manuscript chronicles the process and products of a redesign for evaluation of the graduate college experience (GCE) which was initiated by a university graduate college, based on its observed need to reconsider and update its measures and methods for assessing graduate students' experiences. We examined the existing instrumentation and…

Autism Diagnosis and Screening: Factors to Consider in Differential Diagnosis

ERIC Educational Resources Information Center

Matson, Johnny L.; Beighley, Jennifer; Turygin, Nicole

2012-01-01

There has been an exponential growth in assessment methods to diagnose disorders on the autism spectrum. Many reasons for this trend exist and include advancing knowledge on how to make a diagnosis, the heterogeneity of the spectrum, the realization that different methods may be needed based on age and intellectual disability. Other factors…

A method of selecting forest sites for air pollution study

Treesearch

Sreedevi K. Bringi; Thomas A. Seliga; Leon S. Dochinger

1981-01-01

Presents a method of selecting suitable forested areas for meaningful assessments of air pollution effects. The approach is based on the premise that environmental influences can significantly affect the forest-air pollution relationship, and that it is, therefore, desirable to equalize such influences at different sites. From existing data on environmental factors and...

Assessment of Technologies for the Space Shuttle External Tank Thermal Protection System and Recommendations for Technology Improvement - Part III: Material Property Characterization, Analysis, and Test Methods

NASA Technical Reports Server (NTRS)

Gates, Thomas S.; Johnson, Theodore F.; Whitley, Karen S.

2005-01-01

The objective of this report is to contribute to the independent assessment of the Space Shuttle External Tank Foam Material. This report specifically addresses material modeling, characterization testing, data reduction methods, and data pedigree. A brief description of the External Tank foam materials, locations, and standard failure modes is provided to develop suitable background information. A review of mechanics based analysis methods from the open literature is used to provide an assessment of the state-of-the-art in material modeling of closed cell foams. Further, this report assesses the existing material property database and investigates sources of material property variability. The report presents identified deficiencies in testing methods and procedures, recommendations for additional testing as required, identification of near-term improvements that should be pursued, and long-term capabilities or enhancements that should be developed.

A Randomized Trial of Brief Interventions for Problem and Pathological Gamblers

ERIC Educational Resources Information Center

Petry, Nancy M.; Weinstock, Jeremiah; Ledgerwood, David M.; Morasco, Benjamin

2008-01-01

Limited research exists regarding methods for reducing problem gambling. Problem gamblers (N = 180) were randomly assigned to assessment only control, 10 min of brief advice, 1 session of motivational enhancement therapy (MET), or 1 session of MET plus 3 sessions of cognitive-behavioral therapy. Gambling was assessed at baseline, at 6 weeks, and…

The Adult Asperger Assessment (AAA): A Diagnostic Method

ERIC Educational Resources Information Center

Baron-Cohen, Simon; Wheelwright, Sally; Robinson, Janine; Woodbury-Smith, Marc

2005-01-01

At the present time there are a large number of adults who have "suspected" Asperger syndrome (AS). In this paper we describe a new instrument, the Adult Asperger Assessment (AAA), developed in our clinic for adults with AS. The need for a new instrument relevant to the diagnosis of AS in adulthood arises because existing instruments are designed…

Prioritizing Health: A Systematic Approach to Scoping Determinants in Health Impact Assessment.

PubMed

McCallum, Lindsay C; Ollson, Christopher A; Stefanovic, Ingrid L

2016-01-01

The determinants of health are those factors that have the potential to affect health, either positively or negatively, and include a range of personal, social, economic, and environmental factors. In the practice of health impact assessment (HIA), the stage at which the determinants of health are considered for inclusion is during the scoping step. The scoping step is intended to identify how the HIA will be carried out and to set the boundaries (e.g., temporal and geographical) for the assessment. There are several factors that can help to inform the scoping process, many of which are considered in existing HIA tools and guidance; however, a systematic method of prioritizing determinants was found to be lacking. In order to analyze existing HIA scoping tools that are available, a systematic literature review was conducted, including both primary and gray literature. A total of 10 HIA scoping tools met the inclusion/exclusion criteria and were carried forward for comparative analysis. The analysis focused on minimum elements and practice standards of HIA scoping that have been established in the field. The analysis determined that existing approaches lack a clear, systematic method of prioritization of health determinants for inclusion in HIA. This finding led to the development of a Systematic HIA Scoping tool that addressed this gap. The decision matrix tool uses factors, such as impact, public concern, and data availability, to prioritize health determinants. Additionally, the tool allows for identification of data gaps and provides a transparent method for budget allocation and assessment planning. In order to increase efficiency and improve utility, the tool was programed into Microsoft Excel. Future work in the area of HIA methodology development is vital to the ongoing success of the practice and utilization of HIA as a reliable decision-making tool.

An easy tool to assess ventilation in health facilities as part of air-borne transmission prevention: a cross-sectional survey from Uganda.

PubMed

Brouwer, Miranda; Katamba, Achilles; Katabira, Elly Tebasoboke; van Leth, Frank

2017-05-03

No guidelines exist on assessing ventilation through air changes per hour (ACH) using a vaneometer. The objective of the study was to evaluate the position and frequency for measuring air velocity using a vaneometer to assess ventilation with ACH; and to assess influence of ambient temperature and weather on ACH. Cross-sectional survey in six urban health facilities in Kampala, Uganda. Measurements consisted of taking air velocity on nine separate moments in five positions in each opening of the TB clinic, laboratory, outpatient consultation and outpatient waiting room using a vaneometer. We assessed in addition the ventilation with the "20% rule", and compared this estimation with the ventilation in ACH assessed using the vaneometer. A total of 189 measurements showed no influence on air velocity of the position and moment of the measurement. No significant influence existed of ambient temperature and a small but significant influence of sunny weather. Ventilation was adequate in 17/24 (71%) of all measurements. Using the "20% rule", ventilation was adequate in 50% of rooms assessed. Agreement between both methods existed in 13/23 (56%) of the rooms assessed. Most rooms had adequate ventilation when assessed using a vaneometer for measuring air velocity. A single vaneometer measurement of air velocity is adequate to assess ventilation in this setting. These findings provide practical input for clear guidelines on assessing ventilation using a vaneometer. Assessing ventilation with a vaneometer differs substantially from applying the "20% rule".

A systematic literature review of open source software quality assessment models.

PubMed

Adewumi, Adewole; Misra, Sanjay; Omoregbe, Nicholas; Crawford, Broderick; Soto, Ricardo

2016-01-01

Many open source software (OSS) quality assessment models are proposed and available in the literature. However, there is little or no adoption of these models in practice. In order to guide the formulation of newer models so they can be acceptable by practitioners, there is need for clear discrimination of the existing models based on their specific properties. Based on this, the aim of this study is to perform a systematic literature review to investigate the properties of the existing OSS quality assessment models by classifying them with respect to their quality characteristics, the methodology they use for assessment, and their domain of application so as to guide the formulation and development of newer models. Searches in IEEE Xplore, ACM, Science Direct, Springer and Google Search is performed so as to retrieve all relevant primary studies in this regard. Journal and conference papers between the year 2003 and 2015 were considered since the first known OSS quality model emerged in 2003. A total of 19 OSS quality assessment model papers were selected. To select these models we have developed assessment criteria to evaluate the quality of the existing studies. Quality assessment models are classified into five categories based on the quality characteristics they possess namely: single-attribute, rounded category, community-only attribute, non-community attribute as well as the non-quality in use models. Our study reflects that software selection based on hierarchical structures is found to be the most popular selection method in the existing OSS quality assessment models. Furthermore, we found that majority (47%) of the existing models do not specify any domain of application. In conclusion, our study will be a valuable contribution to the community and helps the quality assessment model developers in formulating newer models and also to the practitioners (software evaluators) in selecting suitable OSS in the midst of alternatives.

Stormwater BMP Effectiveness Assessment Toolkit

EPA Science Inventory

US EPA has identified stormwater BMP effectiveness as a priority research need. Effective protection of biotic integrity requires that processes maintaining the diversity of physical habitats be protected. Methods are needed to evaluate the effectiveness of existing Stormwater ...

Comparison of measuring instruments for radiofrequency radiation from mobile telephones in epidemiological studies: implications for exposure assessment.

PubMed

Inyang, Imo; Benke, Geza; McKenzie, Ray; Abramson, Michael

2008-03-01

The debate on mobile telephone safety continues. Most epidemiological studies investigating health effects of radiofrequency (RF) radiation emitted by mobile phone handsets have been criticised for poor exposure assessment. Most of these studies relied on the historical reconstruction of participants' phone use by questionnaires. Such exposure assessment methods are prone to recall bias resulting in misclassification that may lead to conflicting conclusions. Although there have been some studies using software-modified phones (SMP) for exposure assessment in the literature, until now there is no published work on the use of hardware modified phones (HMPs) or RF dosimeters for studies of mobile phones and health outcomes. We reviewed existing literature on mobile phone epidemiology with particular attention to exposure assessment methods used. Owing to the inherent limitations of these assessment methods, we suggest that the use of HMPs may show promise for more accurate exposure assessment of RF radiation from mobile phones.

Exploring a taxonomy for aggression against women: can it aid conceptual clarity?

PubMed

Cook, Sarah; Parrott, Dominic

2009-01-01

The assessment of aggression against women is demanding primarily because assessment strategies do not share a common language to describe reliably the wide range of forms of aggression women experience. The lack of a common language impairs efforts to describe these experiences, understand causes and consequences of aggression against women, and develop effective intervention and prevention efforts. This review accomplishes two goals. First, it applies a theoretically and empirically based taxonomy to behaviors assessed by existing measurement instruments. Second, it evaluates whether the taxonomy provides a common language for the field. Strengths of the taxonomy include its ability to describe and categorize all forms of aggression found in existing quantitative measures. The taxonomy also classifies numerous examples of aggression discussed in the literature but notably absent from quantitative measures. Although we use existing quantitative measures as a starting place to evaluate the taxonomy, its use is not limited to quantitative methods. Implications for theory, research, and practice are discussed.

Research on Assessment Methods for Urban Public Transport Development in China

PubMed Central

Zou, Linghong; Guo, Hongwei

2014-01-01

In recent years, with the rapid increase in urban population, the urban travel demands in Chinese cities have been increasing dramatically. As a result, developing comprehensive urban transport systems becomes an inevitable choice to meet the growing urban travel demands. In urban transport systems, public transport plays the leading role to promote sustainable urban development. This paper aims to establish an assessment index system for the development level of urban public transport consisting of a target layer, a criterion layer, and an index layer. Review on existing literature shows that methods used in evaluating urban public transport structure are dominantly qualitative. To overcome this shortcoming, fuzzy mathematics method is used for describing qualitative issues quantitatively, and AHP (analytic hierarchy process) is used to quantify expert's subjective judgment. The assessment model is established based on the fuzzy AHP. The weight of each index is determined through the AHP and the degree of membership of each index through the fuzzy assessment method to obtain the fuzzy synthetic assessment matrix. Finally, a case study is conducted to verify the rationality and practicability of the assessment system and the proposed assessment method. PMID:25530756

The Impact of Using Different Methods to Assess Completeness of 24-Hour Urine Collection on Estimating Dietary Sodium.

PubMed

Wielgosz, Andreas; Robinson, Christopher; Mao, Yang; Jiang, Ying; Campbell, Norm R C; Muthuri, Stella; Morrison, Howard

2016-06-01

The standard for population-based surveillance of dietary sodium intake is 24-hour urine testing; however, this may be affected by incomplete urine collection. The impact of different indirect methods of assessing completeness of collection on estimated sodium ingestion has not been established. The authors enlisted 507 participants from an existing community study in 2009 to collect 24-hour urine samples. Several methods of assessing completeness of urine collection were tested. Mean sodium intake varied between 3648 mg/24 h and 7210 mg/24 h depending on the method used. Excluding urine samples collected for longer or shorter than 24 hours increased the estimated urine sodium excretion, even when corrections for the variation in timed collections were applied. Until an accurate method of indirectly assessing completeness of urine collection is identified, the gold standard of administering para-aminobenzoic acid is recommended. Efforts to ensure participants collect complete urine samples are also warranted. ©2015 Wiley Periodicals, Inc.

A Group Contribution Method for Estimating Cetane and Octane Numbers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kubic, William Louis

Much of the research on advanced biofuels is devoted to the study of novel chemical pathways for converting nonfood biomass into liquid fuels that can be blended with existing transportation fuels. Many compounds under consideration are not found in the existing fuel supplies. Often, the physical properties needed to assess the viability of a potential biofuel are not available. The only reliable information available may be the molecular structure. Group contribution methods for estimating physical properties from molecular structure have been used for more than 60 years. The most common application is estimation of thermodynamic properties. More recently, group contributionmore » methods have been developed for estimating rate dependent properties including cetane and octane numbers. Often, published group contribution methods are limited in terms of types of function groups and range of applicability. In this study, a new, broadly-applicable group contribution method based on an artificial neural network was developed to estimate cetane number research octane number, and motor octane numbers of hydrocarbons and oxygenated hydrocarbons. The new method is more accurate over a greater range molecular weights and structural complexity than existing group contribution methods for estimating cetane and octane numbers.« less

Engagement Assessment Using EEG Signals

NASA Technical Reports Server (NTRS)

Li, Feng; Li, Jiang; McKenzie, Frederic; Zhang, Guangfan; Wang, Wei; Pepe, Aaron; Xu, Roger; Schnell, Thomas; Anderson, Nick; Heitkamp, Dean

2012-01-01

In this paper, we present methods to analyze and improve an EEG-based engagement assessment approach, consisting of data preprocessing, feature extraction and engagement state classification. During data preprocessing, spikes, baseline drift and saturation caused by recording devices in EEG signals are identified and eliminated, and a wavelet based method is utilized to remove ocular and muscular artifacts in the EEG recordings. In feature extraction, power spectrum densities with 1 Hz bin are calculated as features, and these features are analyzed using the Fisher score and the one way ANOVA method. In the classification step, a committee classifier is trained based on the extracted features to assess engagement status. Finally, experiment results showed that there exist significant differences in the extracted features among different subjects, and we have implemented a feature normalization procedure to mitigate the differences and significantly improved the engagement assessment performance.

Technology Assessment Report: Aqueous Sludge Gasification Technologies

EPA Science Inventory

The study reveals that sludge gasification is a potentially suitable alternative to conventional sludge handling and disposal methods. However, very few commercial operations are in existence. The limited pilot, demonstration or commercial application of gasification technology t...

Interdisciplinary research on patient-provider communication: a cross-method comparison.

PubMed

Chou, Wen-Ying Sylvia; Han, Paul; Pilsner, Alison; Coa, Kisha; Greenberg, Larrie; Blatt, Benjamin

2011-01-01

Patient-provider communication, a key aspect of healthcare delivery, has been assessed through multiple methods for purposes of research, education, and quality control. Common techniques include satisfaction ratings and quantitatively- and qualitatively-oriented direct observations. Identifying the strengths and weaknesses of different approaches is critically important in determining the appropriate assessment method for a specific research or practical goal. Analyzing ten videotaped simulated encounters between medical students and Standardized Patients (SPs), this study compared three existing assessment methods through the same data set. Methods included: (1) dichotomized SP ratings on students' communication skills; (2) Roter Interaction Analysis System (RIAS) analysis; and (3) inductive discourse analysis informed by sociolinguistic theories. The large dichotomous contrast between good and poor ratings in (1) was not evidenced in any of the other methods. Following a discussion of strengths and weaknesses of each approach, we pilot-tested a combined assessment done by coders blinded to results of (1)-(3). This type of integrative approach has the potential of adding a quantifiable dimension to qualitative, discourse-based observations. Subjecting the same data set to separate analytic methods provides an excellent opportunity for methodological comparisons with the goal of informing future assessment of clinical encounters.

Applications of integrated human error identification techniques on the chemical cylinder change task.

PubMed

Cheng, Ching-Min; Hwang, Sheue-Ling

2015-03-01

This paper outlines the human error identification (HEI) techniques that currently exist to assess latent human errors. Many formal error identification techniques have existed for years, but few have been validated to cover latent human error analysis in different domains. This study considers many possible error modes and influential factors, including external error modes, internal error modes, psychological error mechanisms, and performance shaping factors, and integrates several execution procedures and frameworks of HEI techniques. The case study in this research was the operational process of changing chemical cylinders in a factory. In addition, the integrated HEI method was used to assess the operational processes and the system's reliability. It was concluded that the integrated method is a valuable aid to develop much safer operational processes and can be used to predict human error rates on critical tasks in the plant. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Development of a general method for detection and quantification of the P35S promoter based on assessment of existing methods

PubMed Central

Wu, Yuhua; Wang, Yulei; Li, Jun; Li, Wei; Zhang, Li; Li, Yunjing; Li, Xiaofei; Li, Jun; Zhu, Li; Wu, Gang

2014-01-01

The Cauliflower mosaic virus (CaMV) 35S promoter (P35S) is a commonly used target for detection of genetically modified organisms (GMOs). There are currently 24 reported detection methods, targeting different regions of the P35S promoter. Initial assessment revealed that due to the absence of primer binding sites in the P35S sequence, 19 of the 24 reported methods failed to detect P35S in MON88913 cotton, and the other two methods could only be applied to certain GMOs. The rest three reported methods were not suitable for measurement of P35S in some testing events, because SNPs in binding sites of the primer/probe would result in abnormal amplification plots and poor linear regression parameters. In this study, we discovered a conserved region in the P35S sequence through sequencing of P35S promoters from multiple transgenic events, and developed new qualitative and quantitative detection systems targeting this conserved region. The qualitative PCR could detect the P35S promoter in 23 unique GMO events with high specificity and sensitivity. The quantitative method was suitable for measurement of P35S promoter, exhibiting good agreement between the amount of template and Ct values for each testing event. This study provides a general P35S screening method, with greater coverage than existing methods. PMID:25483893

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balser, S.; Sankar, S.; Miller, R.

In order to more fully integrate renewable resources, such as wind and solar, into the transmission system, additional capacity must be realized in the short term using the installed transmission capacity that exists today. The U.S. Department of Energy (DOE) and the National Renewable Energy Laboratory Transmission and Grid Integration Group supported this study to assemble the history of regulations and status of transmission technology to expand existing grid capacity. This report compiles data on various transmission technology methods and upgrades for increased capacity utilization of the existing transmission system and transmission corridors. The report discusses the technical merit ofmore » each method and explains how the method could be applied within the current regulatory structure to increase existing transmission conductor and/or corridor capacity. The history and current state of alternatives to new construction is presented for regulators, legislators, and other policy makers wrestling with issues surrounding integration of variable generation. Current regulations are assessed for opportunities to change them to promote grid expansion. To support consideration of these alternatives for expanding grid capacity, the report lists relevant rules, standards, and policy changes.« less

Map data-driven assessment of urban areas accessibility

NASA Astrophysics Data System (ADS)

Parygin, D. S.; Aleshkevich, A. A.; Golubev, A. V.; Smykovskaya, T. K.; Finogeev, A. G.

2018-05-01

The study analyzes the existing approaches to assessment of the city territory transport accessibility. The method for the city territory sections connectedness assessment through the personal and public transport was developed. The assessment of transport accessibility is proposed based on an analysis of open cartographic data. The technology of calculation and visualization of urban areas interconnectedness with the use of a street network graph and public transport routes, data obtained from Internet map services have been developed. An example of territory accessibility assessments visualization on an online map is given.

Review of near-infrared methods for wound assessment

NASA Astrophysics Data System (ADS)

Sowa, Michael G.; Kuo, Wen-Chuan; Ko, Alex C.-T.; Armstrong, David G.

2016-09-01

Wound management is a challenging and costly problem that is growing in importance as people are living longer. Instrumental methods are increasingly being relied upon to provide objective measures of wound assessment to help guide management. Technologies that employ near-infrared (NIR) light form a prominent contingent among the existing and emerging technologies. We review some of these technologies. Some are already established, such as indocyanine green fluorescence angiography, while we also speculate on others that have the potential to be clinically relevant to wound monitoring and assessment. These various NIR-based technologies address clinical wound management needs along the entire healing trajectory of a wound.

Assessing family medicine trainees--what can we learn from the European neighbours?

PubMed

Flum, Elisabeth; Maagaard, Roar; Godycki-Cwirko, Maciek; Scarborough, Nigel; Scherpbier, Nynke; Ledig, Thomas; Roos, Marco; Steinhäuser, Jost

2015-01-01

Although demands on family physicians (FP) are to a large extent similar in the European Union, uniform assessment standards for family medicine (FM) specialty training and assessment do not exist. Aim of this pilot study was to elicit and compare the different modalities and assessment methods of FM specialty training in five European countries. A semi structured survey was undertaken based on a convenient sample in five European countries (Denmark, Germany, Poland, the Netherlands and the United Kingdom). The respondents were asked to respond to ten items about aspects of FM specialty training and assessment methods in their respective countries. If available, this data was completed with information from official websites of the countries involved. FM specialty training is performed heterogeneously in the surveyed countries. Training time periods range from three to five years, in some countries requiring a foundation program of up to two years. Most countries perform longitudinal assessment during FM specialty training using a combination of competence-based approach with additional formative and summative assessment. There is some evidence on the assessments methods used, however the assessment method used and costs of assessment differs remarkably between the participating countries. Longitudinal and competence-based assessment is the presently preferred approach for FM specialty training. Countries which use less multifaceted methods for assessment could learn from best practice. Potential changes have significant cost implications.

A sequential test for assessing observed agreement between raters.

PubMed

Bersimis, Sotiris; Sachlas, Athanasios; Chakraborti, Subha

2018-01-01

Assessing the agreement between two or more raters is an important topic in medical practice. Existing techniques, which deal with categorical data, are based on contingency tables. This is often an obstacle in practice as we have to wait for a long time to collect the appropriate sample size of subjects to construct the contingency table. In this paper, we introduce a nonparametric sequential test for assessing agreement, which can be applied as data accrues, does not require a contingency table, facilitating a rapid assessment of the agreement. The proposed test is based on the cumulative sum of the number of disagreements between the two raters and a suitable statistic representing the waiting time until the cumulative sum exceeds a predefined threshold. We treat the cases of testing two raters' agreement with respect to one or more characteristics and using two or more classification categories, the case where the two raters extremely disagree, and finally the case of testing more than two raters' agreement. The numerical investigation shows that the proposed test has excellent performance. Compared to the existing methods, the proposed method appears to require significantly smaller sample size with equivalent power. Moreover, the proposed method is easily generalizable and brings the problem of assessing the agreement between two or more raters and one or more characteristics under a unified framework, thus providing an easy to use tool to medical practitioners. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

In Search of a Time Efficient Approach to Crack and Delamination Growth Predictions in Composites

NASA Technical Reports Server (NTRS)

Krueger, Ronald; Carvalho, Nelson

2016-01-01

Analysis benchmarking was used to assess the accuracy and time efficiency of algorithms suitable for automated delamination growth analysis. First, the Floating Node Method (FNM) was introduced and its combination with a simple exponential growth law (Paris Law) and Virtual Crack Closure technique (VCCT) was discussed. Implementation of the method into a user element (UEL) in Abaqus/Standard(Registered TradeMark) was also presented. For the assessment of growth prediction capabilities, an existing benchmark case based on the Double Cantilever Beam (DCB) specimen was briefly summarized. Additionally, the development of new benchmark cases based on the Mixed-Mode Bending (MMB) specimen to assess the growth prediction capabilities under mixed-mode I/II conditions was discussed in detail. A comparison was presented, in which the benchmark cases were used to assess the existing low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) in comparison to the FNM-VCCT fatigue growth analysis implementation. The low-cycle fatigue analysis tool in Abaqus/Standard(Registered TradeMark) was able to yield results that were in good agreement with the DCB benchmark example. Results for the MMB benchmark cases, however, only captured the trend correctly. The user element (FNM-VCCT) always yielded results that were in excellent agreement with all benchmark cases, at a fraction of the analysis time. The ability to assess the implementation of two methods in one finite element code illustrated the value of establishing benchmark solutions.

Critical Analysis of Existing Recyclability Assessment Methods for New Products in Order to Define a Reference Method

NASA Astrophysics Data System (ADS)

Maris, E.; Froelich, D.

The designers of products subject to the European regulations on waste have an obligation to improve the recyclability of their products from the very first design stages. The statutory texts refer to ISO standard 22 628, which proposes a method to calculate vehicle recyclability. There are several scientific studies that propose other calculation methods as well. Yet the feedback from the CREER club, a group of manufacturers and suppliers expert in ecodesign and recycling, is that the product recyclability calculation method proposed in this standard is not satisfactory, since only a mass indicator is used, the calculation scope is not clearly defined, and common data on the recycling industry does not exist to allow comparable calculations to be made for different products. For these reasons, it is difficult for manufacturers to have access to a method and common data for calculation purposes.

Automation of CT-based haemorrhagic stroke assessment for improved clinical outcomes: study protocol and design

PubMed Central

Chinda, Betty; Medvedev, George; Siu, William; Ester, Martin; Arab, Ali; Gu, Tao; Moreno, Sylvain; D’Arcy, Ryan C N; Song, Xiaowei

2018-01-01

Introduction Haemorrhagic stroke is of significant healthcare concern due to its association with high mortality and lasting impact on the survivors’ quality of life. Treatment decisions and clinical outcomes depend strongly on the size, spread and location of the haematoma. Non-contrast CT (NCCT) is the primary neuroimaging modality for haematoma assessment in haemorrhagic stroke diagnosis. Current procedures do not allow convenient NCCT-based haemorrhage volume calculation in clinical settings, while research-based approaches are yet to be tested for clinical utility; there is a demonstrated need for developing effective solutions. The project under review investigates the development of an automatic NCCT-based haematoma computation tool in support of accurate quantification of haematoma volumes. Methods and analysis Several existing research methods for haematoma volume estimation are studied. Selected methods are tested using NCCT images of patients diagnosed with acute haemorrhagic stroke. For inter-rater and intrarater reliability evaluation, different raters will analyse haemorrhage volumes independently. The efficiency with respect to time of haematoma volume assessments will be examined to compare with the results from routine clinical evaluations and planimetry assessment that are known to be more accurate. The project will target the development of an enhanced solution by adapting existing methods and integrating machine learning algorithms. NCCT-based information of brain haemorrhage (eg, size, volume, location) and other relevant information (eg, age, sex, risk factor, comorbidities) will be used in relation to clinical outcomes with future project development. Validity and reliability of the solution will be examined for potential clinical utility. Ethics and dissemination The project including procedures for deidentification of NCCT data has been ethically approved. The study involves secondary use of existing data and does not require new consent of participation. The team consists of clinical neuroimaging scientists, computing scientists and clinical professionals in neurology and neuroradiology and includes patient representatives. Research outputs will be disseminated following knowledge translation plans towards improving stroke patient care. Significant findings will be published in scientific journals. Anticipated deliverables include computer solutions for improved clinical assessment of haematoma using NCCT. PMID:29674371

A review of protocols for monitoring streams and juvenile fish in forested regions of the Pacific Northwest.

Treesearch

Scott A. Stolnack; Mason D. Bryant; Robert C. Wissmar

2005-01-01

This document reviews existing and proposed protocols used to monitor stream ecosystem conditions and responses to land management activities in the Pacific Northwest. Because of recent work aimed at improving the utility of habitat survey and fish abundance assessment methods, this review focuses on current (since 1993) monitoring efforts that assess stream habitat...

Assessment of modification factors for a row of bolts or timber connectors

Treesearch

Thomas Lee Wilkinson

1980-01-01

When bolts or timber connectors are used in a row, with load applied parallel to the row, load will be unequally distributed among the fasteners. This study assessed methods of predicting this unequal load distribution, looked at how joint variables can affect the distribution, and compared the predictions with data existing in the literature. Presently used design...

Are We Teaching Them Anything?: A Model for Measuring Methodology Skills in the Political Science Major

ERIC Educational Resources Information Center

Siver, Christi; Greenfest, Seth W.; Haeg, G. Claire

2016-01-01

While the literature emphasizes the importance of teaching political science students methods skills, there currently exists little guidance for how to assess student learning over the course of their time in the major. To address this gap, we develop a model set of assessment tools that may be adopted and adapted by political science departments…

Assessing crown fire potential by linking models of surface and crown fire behavior

Treesearch

Joe H. Scott; Elizabeth D. Reinhardt

2001-01-01

Fire managers are increasingly concerned about the threat of crown fires, yet only now are quantitative methods for assessing crown fire hazard being developed. Links among existing mathematical models of fire behavior are used to develop two indices of crown fire hazard-the Torching Index and Crowning Index. These indices can be used to ordinate different forest...

Regulatory experience in applying a radiological environmental protection framework for existing and planned nuclear facilities.

PubMed

Mihok, S; Thompson, P

2012-01-01

Frameworks and methods for the radiological protection of non-human biota have been evolving rapidly at the International Commission on Radiological Protection and through various European initiatives. The International Atomic Energy Agency has incorporated a requirement for environmental protection in the latest revision of its Basic Safety Standards. In Canada, the Canadian Nuclear Safety Commission has been legally obligated to prevent unreasonable risk to the environment since 2000. Licensees have therefore been meeting generic legal requirements to demonstrate adequate control of releases of radioactive substances for the protection of both people and biota for many years. In the USA, in addition to the generic requirements of the Environmental Protection Agency and the Nuclear Regulatory Commission, Department of Energy facilities have also had to comply with specific dose limits after a standard assessment methodology was finalised in 2002. Canadian regulators developed a similar framework for biota dose assessment through a regulatory assessment under the Canadian Environmental Protection Act in the late 1990s. Since then, this framework has been applied extensively to satisfy legal requirements under the Canadian Environmental Assessment Act and the Nuclear Safety and Control Act. After approximately a decade of experience in applying these methods, it is clear that simple methods are fit for purpose, and can be used for making regulatory decisions for existing and planned nuclear facilities. Copyright © 2012. Published by Elsevier Ltd.

Monitoring the ability to deliver care in low- and middle-income countries: a systematic review of health facility assessment tools

PubMed Central

Nickerson, Jason W; Adams, Orvill; Attaran, Amir; Hatcher-Roberts, Janet; Tugwell, Peter

2015-01-01

Introduction Health facilities assessments are an essential instrument for health system strengthening in low- and middle-income countries. These assessments are used to conduct health facility censuses to assess the capacity of the health system to deliver health care and to identify gaps in the coverage of health services. Despite the valuable role of these assessments, there are currently no minimum standards or frameworks for these tools. Methods We used a structured keyword search of the MEDLINE, EMBASE and HealthStar databases and searched the websites of the World Health Organization, the World Bank and the International Health Facilities Assessment Network to locate all available health facilities assessment tools intended for use in low- and middle-income countries. We parsed the various assessment tools to identify similarities between them, which we catalogued into a framework comprising 41 assessment domains. Results We identified 10 health facility assessment tools meeting our inclusion criteria, all of which were included in our analysis. We found substantial variation in the comprehensiveness of the included tools, with the assessments containing indicators in 13 to 33 (median: 25.5) of the 41 assessment domains included in our framework. None of the tools collected data on all 41 of the assessment domains we identified. Conclusions Not only do a large number of health facility assessment tools exist, but the data they collect and methods they employ are very different. This certainly limits the comparability of the data between different countries’ health systems and probably creates blind spots that impede efforts to strengthen those systems. Agreement is needed on the essential elements of health facility assessments to guide the development of specific indicators and for refining existing instruments. PMID:24895350

Multimodal evaluation and management of children with concussion: using our heads and available evidence.

PubMed

Gioia, Gerard A

2015-01-01

Significant attention has been focused on concussions in children, but a dearth of research evidence exists supporting clinical evaluation and management. The primary objective of this review paper is to describe a multimodal, developmentally adapted, standardized concussion assessment and active rehabilitation approach for children as young as 5 years old. This study reviews the CDC-funded research programme, including the development of tools for post-concussion symptom assessment involving the child and parent, measurement of specific neurocognitive functions and assessment of dynamic cognitive exertional effects. A clinical approach to active, individualized, moderated concussion rehabilitation management is presented, including a 10-step guide to symptom management, with a specific focus on the school challenges faced by the recovering student. To better inform concussion practice across the developmental age spectrum, a significant need exists for further research evidence to refine clinical assessment methods and develop effective treatment approaches.

Multimodal Evaluation and Management of Children with Concussion: Using our heads and available evidence

PubMed Central

Gioia, Gerard A.

2015-01-01

Significant attention has been focused on concussions in children but a dearth of research evidence exists supporting clinical evaluation and management. The primary objective of this review paper is to describe a multimodal, developmentally adapted, standardized concussion assessment and active rehabilitation approach for children as young as age five. We review our CDC-funded research program including the development of tools for post-concussion symptom assessment involving the child and parent, measurement of specific neurocognitive functions, and assessment of dynamic cognitive exertional effects. A clinical approach to active, individualized, moderated concussion rehabilitation management is presented, including a ten step guide to symptom management, with a specific focus on the school challenges faced by the recovering student. To better inform concussion practice across the developmental age spectrum, a significant need exists for further research evidence to refine our clinical assessment methods and develop effective treatment approaches. PMID:25356518

A comparison of current practice patterns of US dermatologists versus published guidelines for the biopsy, initial management, and follow up of patients with primary cutaneous melanoma.

PubMed

Farberg, Aaron S; Rigel, Darrell S

2016-12-01

Guidelines exist for the management of cutaneous malignant melanoma, but their adoption, prevalence, and impact have not yet been determined. To determine current melanoma clinical management practices of US dermatologists and the variance from guidelines that might exist. A cross-sectional e-mail survey study assessing preferred biopsy methods for lesions suspicious for melanoma, margins used for excision, and recommended follow-up intervals were sent to 6177 US dermatologists (540 responding). The representative nature of the responding subset was verified by comparing their demographics to that from the American Academy of Dermatology (AAD) membership. Management varied from published guidelines. Shave biopsy (35%) was the most commonly used method followed by narrow excisional biopsy (31%), saucerization/scoop shave (12%), punch (11%), and wide excision (3%). Excisional margins narrower than recommended were noted and follow-up intervals varied. There were significant management differences noted for dermatologists by practice setting and by years in practice. The impact of patient history, lesion anatomic site, and size of lesion were not assessed. Recall and nonresponder sampling bias may exist. Variations in dermatologists' approaches to melanoma management and variance from current guidelines suggest that a knowledge gap may exist representing an educational opportunity. However, emerging data may also justify deviations from existing guidelines, suggesting a reassessment of the guidelines may be indicated. Copyright © 2016 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Design for fish passage at roadway-stream crossings : synthesis report.

DOT National Transportation Integrated Search

2007-06-01

Cataloging and synthesizing existing methods for the design of roadway-stream crossings for fish passage began in : January 2005 with an extensive literature review covering the topics of culvert design and assessment to facilitate : fish passage. A ...

Corrosion performance tests for reinforcing steel in concrete : test procedures.

DOT National Transportation Integrated Search

2009-09-01

The existing test method to assess the corrosion performance of reinforcing steel embedded in concrete, mainly : ASTM G109, is labor intensive, time consuming, slow to provide comparative results, and often expensive. : However, corrosion of reinforc...

Corrosion performance tests for reinforcing steel in concrete : technical report.

DOT National Transportation Integrated Search

2009-10-01

The existing test method used to assess the corrosion performance of reinforcing steel embedded in : concrete, mainly ASTM G 109, is labor intensive, time consuming, slow to provide comparative results, : and can be expensive. However, with corrosion...

Safety Sufficiency for NextGen: Assessment of Selected Existing Safety Methods, Tools, Processes, and Regulations

NASA Technical Reports Server (NTRS)

Xu, Xidong; Ulrey, Mike L.; Brown, John A.; Mast, James; Lapis, Mary B.

2013-01-01

NextGen is a complex socio-technical system and, in many ways, it is expected to be more complex than the current system. It is vital to assess the safety impact of the NextGen elements (technologies, systems, and procedures) in a rigorous and systematic way and to ensure that they do not compromise safety. In this study, the NextGen elements in the form of Operational Improvements (OIs), Enablers, Research Activities, Development Activities, and Policy Issues were identified. The overall hazard situation in NextGen was outlined; a high-level hazard analysis was conducted with respect to multiple elements in a representative NextGen OI known as OI-0349 (Automation Support for Separation Management); and the hazards resulting from the highly dynamic complexity involved in an OI-0349 scenario were illustrated. A selected but representative set of the existing safety methods, tools, processes, and regulations was then reviewed and analyzed regarding whether they are sufficient to assess safety in the elements of that OI and ensure that safety will not be compromised and whether they might incur intolerably high costs.

An Automated System for Skeletal Maturity Assessment by Extreme Learning Machines

PubMed Central

Mansourvar, Marjan; Shamshirband, Shahaboddin; Raj, Ram Gopal; Gunalan, Roshan; Mazinani, Iman

2015-01-01

Assessing skeletal age is a subjective and tedious examination process. Hence, automated assessment methods have been developed to replace manual evaluation in medical applications. In this study, a new fully automated method based on content-based image retrieval and using extreme learning machines (ELM) is designed and adapted to assess skeletal maturity. The main novelty of this approach is it overcomes the segmentation problem as suffered by existing systems. The estimation results of ELM models are compared with those of genetic programming (GP) and artificial neural networks (ANNs) models. The experimental results signify improvement in assessment accuracy over GP and ANN, while generalization capability is possible with the ELM approach. Moreover, the results are indicated that the ELM model developed can be used confidently in further work on formulating novel models of skeletal age assessment strategies. According to the experimental results, the new presented method has the capacity to learn many hundreds of times faster than traditional learning methods and it has sufficient overall performance in many aspects. It has conclusively been found that applying ELM is particularly promising as an alternative method for evaluating skeletal age. PMID:26402795

A novel knowledge-based potential for RNA 3D structure evaluation

NASA Astrophysics Data System (ADS)

Yang, Yi; Gu, Qi; Zhang, Ben-Gong; Shi, Ya-Zhou; Shao, Zhi-Gang

2018-03-01

Ribonucleic acids (RNAs) play a vital role in biology, and knowledge of their three-dimensional (3D) structure is required to understand their biological functions. Recently structural prediction methods have been developed to address this issue, but a series of RNA 3D structures are generally predicted by most existing methods. Therefore, the evaluation of the predicted structures is generally indispensable. Although several methods have been proposed to assess RNA 3D structures, the existing methods are not precise enough. In this work, a new all-atom knowledge-based potential is developed for more accurately evaluating RNA 3D structures. The potential not only includes local and nonlocal interactions but also fully considers the specificity of each RNA by introducing a retraining mechanism. Based on extensive test sets generated from independent methods, the proposed potential correctly distinguished the native state and ranked near-native conformations to effectively select the best. Furthermore, the proposed potential precisely captured RNA structural features such as base-stacking and base-pairing. Comparisons with existing potential methods show that the proposed potential is very reliable and accurate in RNA 3D structure evaluation. Project supported by the National Science Foundation of China (Grants Nos. 11605125, 11105054, 11274124, and 11401448).

Leveling data in geochemical mapping: scope of application, pros and cons of existing methods

NASA Astrophysics Data System (ADS)

Pereira, Benoît; Vandeuren, Aubry; Sonnet, Philippe

2017-04-01

Geochemical mapping successfully met a range of needs from mineral exploration to environmental management. In Europe and around the world numerous geochemical datasets already exist. These datasets may originate from geochemical mapping projects or from the collection of sample analyses requested by environmental protection regulatory bodies. Combining datasets can be highly beneficial for establishing geochemical maps with increased resolution and/or coverage area. However this practice requires assessing the equivalence between datasets and, if needed, applying data leveling to remove possible biases between datasets. In the literature, several procedures for assessing dataset equivalence and leveling data are proposed. Daneshfar & Cameron (1998) proposed a method for the leveling of two adjacent datasets while Pereira et al. (2016) proposed two methods for the leveling of datasets that contain records located within the same geographical area. Each discussed method requires its own set of assumptions (underlying populations of data, spatial distribution of data, etc.). Here we propose to discuss the scope of application, pros, cons and practical recommendations for each method. This work is illustrated with several case studies in Wallonia (Southern Belgium) and in Europe involving trace element geochemical datasets. References: Daneshfar, B. & Cameron, E. (1998), Leveling geochemical data between map sheets, Journal of Geochemical Exploration 63(3), 189-201. Pereira, B.; Vandeuren, A.; Govaerts, B. B. & Sonnet, P. (2016), Assessing dataset equivalence and leveling data in geochemical mapping, Journal of Geochemical Exploration 168, 36-48.

Quantification of Peptides from Immunoglobulin Constant and Variable Regions by Liquid Chromatography-Multiple Reaction Monitoring Mass Spectrometry for Assessment of Multiple Myeloma Patients

PubMed Central

Remily-Wood, Elizabeth R.; Benson, Kaaron; Baz, Rachid C.; Chen, Y. Ann; Hussein, Mohamad; Hartley-Brown, Monique A.; Sprung, Robert W.; Perez, Brianna; Liu, Richard Z.; Yoder, Sean; Teer, Jamie; Eschrich, Steven A.; Koomen, John M.

2014-01-01

Purpose Quantitative mass spectrometry assays for immunoglobulins (Igs) are compared with existing clinical methods in samples from patients with plasma cell dyscrasias, e.g. multiple myeloma. Experimental design Using LC-MS/MS data, Ig constant region peptides and transitions were selected for liquid chromatography-multiple reaction monitoring mass spectrometry (LC-MRM). Quantitative assays were used to assess Igs in serum from 83 patients. Results LC-MRM assays quantify serum levels of Igs and their isoforms (IgG1–4, IgA1–2, IgM, IgD, and IgE, as well as kappa(κ) and lambda(λ) light chains). LC-MRM quantification has been applied to single samples from a patient cohort and a longitudinal study of an IgE patient undergoing treatment, to enable comparison with existing clinical methods. Proof-of-concept data for defining and monitoring variable region peptides are provided using the H929 multiple myeloma cell line and two MM patients. Conclusions and Clinical Relevance LC-MRM assays targeting constant region peptides determine the type and isoform of the involved immunoglobulin and quantify its expression; the LC-MRM approach has improved sensitivity compared with the current clinical method, but slightly higher interassay variability. Detection of variable region peptides is a promising way to improve Ig quantification, which could produce a dramatic increase in sensitivity over existing methods, and could further complement current clinical techniques. PMID:24723328

Quantification of peptides from immunoglobulin constant and variable regions by LC-MRM MS for assessment of multiple myeloma patients.

PubMed

Remily-Wood, Elizabeth R; Benson, Kaaron; Baz, Rachid C; Chen, Y Ann; Hussein, Mohamad; Hartley-Brown, Monique A; Sprung, Robert W; Perez, Brianna; Liu, Richard Z; Yoder, Sean J; Teer, Jamie K; Eschrich, Steven A; Koomen, John M

2014-10-01

Quantitative MS assays for Igs are compared with existing clinical methods in samples from patients with plasma cell dyscrasias, for example, multiple myeloma (MM). Using LC-MS/MS data, Ig constant region peptides, and transitions were selected for LC-MRM MS. Quantitative assays were used to assess Igs in serum from 83 patients. RNA sequencing and peptide-based LC-MRM are used to define peptides for quantification of the disease-specific Ig. LC-MRM assays quantify serum levels of Igs and their isoforms (IgG1-4, IgA1-2, IgM, IgD, and IgE, as well as kappa (κ) and lambda (λ) light chains). LC-MRM quantification has been applied to single samples from a patient cohort and a longitudinal study of an IgE patient undergoing treatment, to enable comparison with existing clinical methods. Proof-of-concept data for defining and monitoring variable region peptides are provided using the H929 MM cell line and two MM patients. LC-MRM assays targeting constant region peptides determine the type and isoform of the involved Ig and quantify its expression; the LC-MRM approach has improved sensitivity compared with the current clinical method, but slightly higher inter-assay variability. Detection of variable region peptides is a promising way to improve Ig quantification, which could produce a dramatic increase in sensitivity over existing methods, and could further complement current clinical techniques. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Comparison of non-invasive assessment of liver fibrosis in patients with alpha1-antitrypsin deficiency using magnetic resonance elastography (MRE), acoustic radiation force impulse (ARFI) Quantification, and 2D-shear wave elastography (2D-SWE).

PubMed

Reiter, Rolf; Wetzel, Martin; Hamesch, Karim; Strnad, Pavel; Asbach, Patrick; Haas, Matthias; Siegmund, Britta; Trautwein, Christian; Hamm, Bernd; Klatt, Dieter; Braun, Jürgen; Sack, Ingolf; Tzschätzsch, Heiko

2018-01-01

Although it has been known for decades that patients with alpha1-antitrypsin deficiency (AATD) have an increased risk of cirrhosis and hepatocellular carcinoma, limited data exist on non-invasive imaging-based methods for assessing liver fibrosis such as magnetic resonance elastography (MRE) and acoustic radiation force impulse (ARFI) quantification, and no data exist on 2D-shear wave elastography (2D-SWE). Therefore, the purpose of this study is to evaluate and compare the applicability of different elastography methods for the assessment of AATD-related liver fibrosis. Fifteen clinically asymptomatic AATD patients (11 homozygous PiZZ, 4 heterozygous PiMZ) and 16 matched healthy volunteers were examined using MRE and ARFI quantification. Additionally, patients were examined with 2D-SWE. A high correlation is evident for the shear wave speed (SWS) determined with different elastography methods in AATD patients: 2D-SWE/MRE, ARFI quantification/2D-SWE, and ARFI quantification/MRE (R = 0.8587, 0.7425, and 0.6914, respectively; P≤0.0089). Four AATD patients with pathologically increased SWS were consistently identified with all three methods-MRE, ARFI quantification, and 2D-SWE. The high correlation and consistent identification of patients with pathologically increased SWS using MRE, ARFI quantification, and 2D-SWE suggest that elastography has the potential to become a suitable imaging tool for the assessment of AATD-related liver fibrosis. These promising results provide motivation for further investigation of non-invasive assessment of AATD-related liver fibrosis using elastography.

Portfolios: An Alternative Method of Student and Program Assessment

PubMed Central

Hannam, Susan E.

1995-01-01

The use of performance-based evaluation and alternative assessment techniques has become essential for curriculum programs seeking Commission of Accreditation of Allied Health Education Programs (CAAHEP) accreditation. In athletic training education, few assessment models exist to assess student performance over the entire course of their educational program. This article describes a model of assessment-a student athletic training portfolio of “best works.” The portfolio can serve as a method to assess student development and to assess program effectiveness. The goals of the program include purposes specific to the five NATA performance domains. In addition, four types of portfolio evidence are described: artifacts, attestations, productions, and reproductions. Quality assignments and projects completed by students as they progress through a six-semester program are identified relative to the type of evidence and the domain(s) they represent. The portfolio assists with student development, provides feedback for curriculum planning, allows for student/faculty collaboration and “coaching” of the student, and assists with job searching. This information will serve as a useful model for those athletic training programs looking for an alternative method of assessing student and program outcomes. PMID:16558359

Asymptotic and resampling strategies for assessing and comparing indirect effects in multiple mediator models.

PubMed

Preacher, Kristopher J; Hayes, Andrew F

2008-08-01

Hypotheses involving mediation are common in the behavioral sciences. Mediation exists when a predictor affects a dependent variable indirectly through at least one intervening variable, or mediator. Methods to assess mediation involving multiple simultaneous mediators have received little attention in the methodological literature despite a clear need. We provide an overview of simple and multiple mediation and explore three approaches that can be used to investigate indirect processes, as well as methods for contrasting two or more mediators within a single model. We present an illustrative example, assessing and contrasting potential mediators of the relationship between the helpfulness of socialization agents and job satisfaction. We also provide SAS and SPSS macros, as well as Mplus and LISREL syntax, to facilitate the use of these methods in applications.

A framework for assessing Health Economic Evaluation (HEE) quality appraisal instruments

PubMed Central

2012-01-01

Background Health economic evaluations support the health care decision-making process by providing information on costs and consequences of health interventions. The quality of such studies is assessed by health economic evaluation (HEE) quality appraisal instruments. At present, there is no instrument for measuring and improving the quality of such HEE quality appraisal instruments. Therefore, the objectives of this study are to establish a framework for assessing the quality of HEE quality appraisal instruments to support and improve their quality, and to apply this framework to those HEE quality appraisal instruments which have been subject to more scrutiny than others, in order to test the framework and to demonstrate the shortcomings of existing HEE quality appraisal instruments. Methods To develop the quality assessment framework for HEE quality appraisal instruments, the experiences of using appraisal tools for clinical guidelines are used. Based on a deductive iterative process, clinical guideline appraisal instruments identified through literature search are reviewed, consolidated, and adapted to produce the final quality assessment framework for HEE quality appraisal instruments. Results The final quality assessment framework for HEE quality appraisal instruments consists of 36 items organized within 7 dimensions, each of which captures a specific domain of quality. Applying the quality assessment framework to four existing HEE quality appraisal instruments, it is found that these four quality appraisal instruments are of variable quality. Conclusions The framework described in this study should be regarded as a starting point for appraising the quality of HEE quality appraisal instruments. This framework can be used by HEE quality appraisal instrument producers to support and improve the quality and acceptance of existing and future HEE quality appraisal instruments. By applying this framework, users of HEE quality appraisal instruments can become aware of methodological deficiencies inherent in existing HEE quality appraisal instruments. These shortcomings of existing HEE quality appraisal instruments are illustrated by the pilot test. PMID:22894708

The creation, management, and use of data quality information for life cycle assessment.

PubMed

Edelen, Ashley; Ingwersen, Wesley W

2018-04-01

Despite growing access to data, questions of "best fit" data and the appropriate use of results in supporting decision making still plague the life cycle assessment (LCA) community. This discussion paper addresses revisions to assessing data quality captured in a new US Environmental Protection Agency guidance document as well as additional recommendations on data quality creation, management, and use in LCA databases and studies. Existing data quality systems and approaches in LCA were reviewed and tested. The evaluations resulted in a revision to a commonly used pedigree matrix, for which flow and process level data quality indicators are described, more clarity for scoring criteria, and further guidance on interpretation are given. Increased training for practitioners on data quality application and its limits are recommended. A multi-faceted approach to data quality assessment utilizing the pedigree method alongside uncertainty analysis in result interpretation is recommended. A method of data quality score aggregation is proposed and recommendations for usage of data quality scores in existing data are made to enable improved use of data quality scores in LCA results interpretation. Roles for data generators, data repositories, and data users are described in LCA data quality management. Guidance is provided on using data with data quality scores from other systems alongside data with scores from the new system. The new pedigree matrix and recommended data quality aggregation procedure can now be implemented in openLCA software. Additional ways in which data quality assessment might be improved and expanded are described. Interoperability efforts in LCA data should focus on descriptors to enable user scoring of data quality rather than translation of existing scores. Developing and using data quality indicators for additional dimensions of LCA data, and automation of data quality scoring through metadata extraction and comparison to goal and scope are needed.

Student's Perceptions of Quality Learning in a Malaysian University--A Mixed Method Approach

ERIC Educational Resources Information Center

Choy, S. Chee; Yim, Joanne Sau-Ching; Tan, Poh Leong

2017-01-01

Purpose: This paper aims to examine students' perceptions of quality learning using a mixed-methods approach in a Malaysian university, with an aim to fill existing knowledge gaps in the literature on relationships among relevant quality variables. The study also assesses the extent to which detailed results from a few participants can be…

Methods to estimate total forest biomass for extensive forest inventories: applications in the northeastern U.S.

Treesearch

Eric H. Wharton; Douglas M. Griffith

1993-01-01

Presents methods for synthesizing information from existing biomass literature when making biomass assessments over extensive geographic areas, such as for a state or region. Described are general applications to the northeastern United States, and specific applications to Ohio. Tables of appropriate regression equations and the tree and shrub species to which these...

Evaluating phylogenetic congruence in the post-genomic era.

PubMed

Leigh, Jessica W; Lapointe, François-Joseph; Lopez, Philippe; Bapteste, Eric

2011-01-01

Congruence is a broadly applied notion in evolutionary biology used to justify multigene phylogeny or phylogenomics, as well as in studies of coevolution, lateral gene transfer, and as evidence for common descent. Existing methods for identifying incongruence or heterogeneity using character data were designed for data sets that are both small and expected to be rarely incongruent. At the same time, methods that assess incongruence using comparison of trees test a null hypothesis of uncorrelated tree structures, which may be inappropriate for phylogenomic studies. As such, they are ill-suited for the growing number of available genome sequences, most of which are from prokaryotes and viruses, either for phylogenomic analysis or for studies of the evolutionary forces and events that have shaped these genomes. Specifically, many existing methods scale poorly with large numbers of genes, cannot accommodate high levels of incongruence, and do not adequately model patterns of missing taxa for different markers. We propose the development of novel incongruence assessment methods suitable for the analysis of the molecular evolution of the vast majority of life and support the investigation of homogeneity of evolutionary process in cases where markers do not share identical tree structures.

Evaluating Phylogenetic Congruence in the Post-Genomic Era

PubMed Central

Leigh, Jessica W.; Lapointe, François-Joseph; Lopez, Philippe; Bapteste, Eric

2011-01-01

Congruence is a broadly applied notion in evolutionary biology used to justify multigene phylogeny or phylogenomics, as well as in studies of coevolution, lateral gene transfer, and as evidence for common descent. Existing methods for identifying incongruence or heterogeneity using character data were designed for data sets that are both small and expected to be rarely incongruent. At the same time, methods that assess incongruence using comparison of trees test a null hypothesis of uncorrelated tree structures, which may be inappropriate for phylogenomic studies. As such, they are ill-suited for the growing number of available genome sequences, most of which are from prokaryotes and viruses, either for phylogenomic analysis or for studies of the evolutionary forces and events that have shaped these genomes. Specifically, many existing methods scale poorly with large numbers of genes, cannot accommodate high levels of incongruence, and do not adequately model patterns of missing taxa for different markers. We propose the development of novel incongruence assessment methods suitable for the analysis of the molecular evolution of the vast majority of life and support the investigation of homogeneity of evolutionary process in cases where markers do not share identical tree structures. PMID:21712432

Clothing Protection from Ultraviolet Radiation: A New Method for Assessment.

PubMed

Gage, Ryan; Leung, William; Stanley, James; Reeder, Anthony; Barr, Michelle; Chambers, Tim; Smith, Moira; Signal, Louise

2017-11-01

Clothing modifies ultraviolet radiation (UVR) exposure from the sun and has an impact on skin cancer risk and the endogenous synthesis of vitamin D. There is no standardized method available for assessing body surface area (BSA) covered by clothing, which limits generalizability between study findings. We calculated the body cover provided by 38 clothing items using diagrams of BSA, adjusting the values to account for differences in BSA by age. Diagrams displaying each clothing item were developed and incorporated into a coverage assessment procedure (CAP). Five assessors used the CAP and Lund & Browder chart, an existing method for estimating BSA, to calculate the clothing coverage of an image sample of 100 schoolchildren. Values of clothing coverage, inter-rater reliability and assessment time were compared between CAP and Lund & Browder methods. Both methods had excellent inter-rater reliability (>0.90) and returned comparable results, although the CAP method was significantly faster in determining a person's clothing coverage. On balance, the CAP method appears to be a feasible method for calculating clothing coverage. Its use could improve comparability between sun-safety studies and aid in quantifying the health effects of UVR exposure. © 2017 The American Society of Photobiology.

High-resolution assessment of land use impacts on biodiversity in life cycle assessment using species habitat suitability models.

PubMed

de Baan, Laura; Curran, Michael; Rondinini, Carlo; Visconti, Piero; Hellweg, Stefanie; Koellner, Thomas

2015-02-17

Agricultural land use is a main driver of global biodiversity loss. The assessment of land use impacts in decision-support tools such as life cycle assessment (LCA) requires spatially explicit models, but existing approaches are either not spatially differentiated or modeled at very coarse scales (e.g., biomes or ecoregions). In this paper, we develop a high-resolution (900 m) assessment method for land use impacts on biodiversity based on habitat suitability models (HSM) of mammal species. This method considers potential land use effects on individual species, and impacts are weighted by the species' conservation status and global rarity. We illustrate the method using a case study of crop production in East Africa, but the underlying HSMs developed by the Global Mammals Assessment are available globally. We calculate impacts of three major export crops and compare the results to two previously developed methods (focusing on local and regional impacts, respectively) to assess the relevance of the methodological innovations proposed in this paper. The results highlight hotspots of product-related biodiversity impacts that help characterize the links among agricultural production, consumption, and biodiversity loss.

[Nutritional status of adults with cystic fibrosis - current methods of assessment].

PubMed

Szabla, Anna; Skorupa, Wojciech; Milewska, Magdalena; Weker, Halina

2015-11-01

Cystic fibrosis (CF) is one of the most frequent monogenic disease in the Caucasian population, inherited in an autosomal recessive pattern. This is a multiple organ disease and its main manifestations include pulmonary and gastrointestinal dysfunction. The exocrine pancreatic deficiency results in impaired digestion and absorption what may lead to malnutrition and vitamins and minerals deficiencies. The life expectancy of cystic fibrosis patients has been increasing over the past years, so there is a need to verify usefulness of existing or create new methods of nutritional status assessment. The aim of this paper was presentation current data on the methods of assessment and monitoring of nutritional status. Particular attention has been paid to appropriate nutritional support in prevention and treatment of malnutrition patients with cystic fibrosis. On the basis of recent literature we can conclude that the advanced nutritional status assessment is recommended in patient with CF by using anthropometrical methods, body composition analysis and biochemical data. Good nutritional status is connected with pulmonary functions, quality and life length. © 2015 MEDPRESS.

Assessment of technological level of stem cell research using principal component analysis.

PubMed

Do Cho, Sung; Hwan Hyun, Byung; Kim, Jae Kyeom

2016-01-01

In general, technological levels have been assessed based on specialist's opinion through the methods such as Delphi. But in such cases, results could be significantly biased per study design and individual expert. In this study, therefore scientific literatures and patents were selected by means of analytic indexes for statistic approach and technical assessment of stem cell fields. The analytic indexes, numbers and impact indexes of scientific literatures and patents, were weighted based on principal component analysis, and then, were summated into the single value. Technological obsolescence was calculated through the cited half-life of patents issued by the United States Patents and Trademark Office and was reflected in technological level assessment. As results, ranks of each nation's in reference to the technology level were rated by the proposed method. Furthermore we were able to evaluate strengthens and weaknesses thereof. Although our empirical research presents faithful results, in the further study, there is a need to compare the existing methods and the suggested method.

Investigation of threaded fastener structural integrity

NASA Technical Reports Server (NTRS)

1977-01-01

Technical nondestructive evaluation approaches to the determination of fastener integrity were assessed. Existing instruments and methods used to measure stress or strain were examined, with particular interest in fastener shank stress. Industry procedures being followed were evaluated to establish fastener integrity criteria.

Urban forest ecosystem services: A case study in Corvallis,Oregon

EPA Science Inventory

Background/Questions/Methods One EPA research focus is quantifying ecosystem services, benefits that ecosystems provide to humans, in order to promote informed natural resource management decisions and to assess the effectiveness of existing environmental policies. A case study...

Principles and Applications of Ultrasonic-Based Nondestructive Methods for Self-Healing in Cementitious Materials

PubMed Central

Ahn, Eunjong; Kim, Hyunjun; Sim, Sung-Han; Shin, Sung Woo; Shin, Myoungsu

2017-01-01

Recently, self-healing technologies have emerged as a promising approach to extend the service life of social infrastructure in the field of concrete construction. However, current evaluations of the self-healing technologies developed for cementitious materials are mostly limited to lab-scale experiments to inspect changes in surface crack width (by optical microscopy) and permeability. Furthermore, there is a universal lack of unified test methods to assess the effectiveness of self-healing technologies. Particularly, with respect to the self-healing of concrete applied in actual construction, nondestructive test methods are required to avoid interrupting the use of the structures under evaluation. This paper presents a review of all existing research on the principles of ultrasonic test methods and case studies pertaining to self-healing concrete. The main objective of the study is to examine the applicability and limitation of various ultrasonic test methods in assessing the self-healing performance. Finally, future directions on the development of reliable assessment methods for self-healing cementitious materials are suggested. PMID:28772640

Assessment of the Seismic Risk in the City of Yerevan and its Mitigation by Application of Innovative Seismic Isolation Technologies

NASA Astrophysics Data System (ADS)

Melkumyan, Mikayel G.

2011-03-01

It is obvious that the problem of precise assessment and/or analysis of seismic hazard (SHA) is quite a serious issue, and seismic risk reduction considerably depends on it. It is well known that there are two approaches in seismic hazard analysis, namely, deterministic (DSHA) and probabilistic (PSHA). The latter utilizes statistical estimates of earthquake parameters. However, they may not exist in a specific region, and using PSHA it is difficult to take into account local aspects, such as specific regional geology and site effects, with sufficient precision. For this reason, DSHA is preferable in many cases. After the destructive 1988 Spitak earthquake, the SHA of the territory of Armenia has been revised and increased. The distribution pattern for seismic risk in Armenia is given. Maximum seismic risk is concentrated in the region of the capital, the city of Yerevan, where 40% of the republic's population resides. We describe the method used for conducting seismic resistance assessment of the existing reinforced concrete (R/C) buildings. Using this assessment, as well as GIS technology, the coefficients characterizing the seismic risk of destruction were calculated for almost all buildings of Yerevan City. The results of the assessment are presented. It is concluded that, presently, there is a particularly pressing need for strengthening existing buildings. We then describe non-conventional approaches to upgrading the earthquake resistance of existing multistory R/C frame buildings by means of Additional Isolated Upper Floor (AIUF) and of existing stone and frame buildings by means of base isolation. In addition, innovative seismic isolation technologies were developed and implemented in Armenia for construction of new multistory multifunctional buildings. The advantages of these technologies are listed in the paper. It is worth noting that the aforementioned technologies were successfully applied for retrofitting an existing 100-year-old bank building in Irkutsk (Russia), for retrofit design of an existing 177-year-old municipality building in Iasi (Romania) and for construction of a new clinic building in Stepanakert (Nagorno Karabakh). Short descriptions of these projects are presented. Since 1994 the total number of base and roof isolated buildings constructed, retrofitted or under construction in Armenia, has reached 32. Statistics of seismically isolated buildings are given in the paper. The number of base isolated buildings per capita in Armenia is one of the highest in the world. In Armenia, for the first time in history, retrofitting of existing buildings by base isolation was carried out without interruption in the use of the buildings. The description of different base isolated buildings erected in Armenia, as well as the description of the method of retrofitting of existing buildings which is patented in Armenia (M. G. Melkumyan, patent of the Republic of Armenia No. 579), are also given in the paper.

Open-source platform to benchmark fingerprints for ligand-based virtual screening

PubMed Central

2013-01-01

Similarity-search methods using molecular fingerprints are an important tool for ligand-based virtual screening. A huge variety of fingerprints exist and their performance, usually assessed in retrospective benchmarking studies using data sets with known actives and known or assumed inactives, depends largely on the validation data sets used and the similarity measure used. Comparing new methods to existing ones in any systematic way is rather difficult due to the lack of standard data sets and evaluation procedures. Here, we present a standard platform for the benchmarking of 2D fingerprints. The open-source platform contains all source code, structural data for the actives and inactives used (drawn from three publicly available collections of data sets), and lists of randomly selected query molecules to be used for statistically valid comparisons of methods. This allows the exact reproduction and comparison of results for future studies. The results for 12 standard fingerprints together with two simple baseline fingerprints assessed by seven evaluation methods are shown together with the correlations between methods. High correlations were found between the 12 fingerprints and a careful statistical analysis showed that only the two baseline fingerprints were different from the others in a statistically significant way. High correlations were also found between six of the seven evaluation methods, indicating that despite their seeming differences, many of these methods are similar to each other. PMID:23721588

Assessing capacity to consent for research in cognitively impaired older patients

PubMed Central

Gilbert, Thomas; Bosquet, Antoine; Thomas-Antérion, Catherine; Bonnefoy, Marc; Le Saux, Olivia

2017-01-01

Background The number of clinical trials including older patients, and particularly patients with cognitive impairment, is increasing. While statutory provisions exist to make sure that the capacity to consent is assessed systematically for each patient, many gray areas remain with regard to how this assessment is made or should be made in the routine practice of clinical research. Objectives The aim of this review was to draw up an inventory of assessment tools evaluating older patients’ capacity to consent specifically applicable to clinical research, which could be used in routine practice. Methods Two authors independently searched PubMed, Cochrane, and Google Scholar data-bases between November 2015 and January 2016. The search was actualized in April 2017. We used keywords (MeSH terms and text words) referring to informed consent, capacity to consent, consent for research, research ethics, cognitive impairment, vulnerable older patients, and assessment tools. Existing reviews were also considered. Results Among the numerous existing tools for assessing capacity to consent, 14 seemed potentially suited for clinical research and six were evaluated in older patients. The MacArthur Competence Assessment Tool for Clinical Research (MacCAT-CR) was the most frequently cited. Conclusion The MacCAT-CR is currently the most used and the best validated questionnaire. However, it appears difficult to use and time-consuming. A more recent tool, the University of California Brief Assessment of Capacity to Consent (UBACC), seems interesting for routine practice because of its simplicity, relevance, and applicability in older patients. PMID:29026293

A program needs-driven approach to selecting dietary assessment methods for decision-making in food fortification programs.

PubMed

Coates, Jennifer; Colaiezzi, Brooke; Fiedler, John L; Wirth, James; Lividini, Keith; Rogers, Beatrice

2012-09-01

Dietary assessment data are essential for designing, monitoring, and evaluating food fortification and other food-based nutrition programs. Planners and managers must understand the validity, usefulness, and cost tradeoffs of employing alternative dietary assessment methods, but little guidance exists. To identify and apply criteria to assess the tradeoffs of using alternative dietary methods for meeting fortification programming needs. Twenty-five semistructured expert interviews were conducted and literature was reviewed for information on the validity, usefulness, and cost of using 24-hour recalls, Food Frequency Questionnaires/Fortification Rapid Assessment Tool (FFQ/FRAT), Food Balance Sheets (FBS), and Household Consumption and Expenditures Surveys (HCES) for program stage-specific information needs. Criteria were developed and applied to construct relative rankings of the four methods. Needs assessment: HCES offers the greatest suitability at the lowest cost for estimating the risk of inadequate intakes, but relative to 24-hour recall compromises validity. HCES should be used to identify vehicles and to estimate coverage and likely impact due to its low cost and moderate-to-high validity. Baseline assessment: 24-hour recall should be applied using a representative sample. Monitoring: A simple, low-cost FFQ can be used to monitor coverage. Impact evaluation: 24-hour recall should be used to assess changes in nutrient intakes. FBS have low validity relative to other methods for all programmatic purposes. Each dietary assessment method has strengths and weaknesses that vary by context and purpose. Method selection must be driven by the program's data needs, the suitability of the methods for the purpose, and a clear understanding of the tradeoffs involved.

Healthcare Databases in Thailand and Japan: Potential Sources for Health Technology Assessment Research

PubMed Central

Saokaew, Surasak; Sugimoto, Takashi; Kamae, Isao; Pratoomsoot, Chayanin; Chaiyakunapruk, Nathorn

2015-01-01

Background Health technology assessment (HTA) has been continuously used for value-based healthcare decisions over the last decade. Healthcare databases represent an important source of information for HTA, which has seen a surge in use in Western countries. Although HTA agencies have been established in Asia-Pacific region, application and understanding of healthcare databases for HTA is rather limited. Thus, we reviewed existing databases to assess their potential for HTA in Thailand where HTA has been used officially and Japan where HTA is going to be officially introduced. Method Existing healthcare databases in Thailand and Japan were compiled and reviewed. Databases’ characteristics e.g. name of database, host, scope/objective, time/sample size, design, data collection method, population/sample, and variables were described. Databases were assessed for its potential HTA use in terms of safety/efficacy/effectiveness, social/ethical, organization/professional, economic, and epidemiological domains. Request route for each database was also provided. Results Forty databases– 20 from Thailand and 20 from Japan—were included. These comprised of national censuses, surveys, registries, administrative data, and claimed databases. All databases were potentially used for epidemiological studies. In addition, data on mortality, morbidity, disability, adverse events, quality of life, service/technology utilization, length of stay, and economics were also found in some databases. However, access to patient-level data was limited since information about the databases was not available on public sources. Conclusion Our findings have shown that existing databases provided valuable information for HTA research with limitation on accessibility. Mutual dialogue on healthcare database development and usage for HTA among Asia-Pacific region is needed. PMID:26560127

A mobile phone user interface for image-based dietary assessment

NASA Astrophysics Data System (ADS)

Ahmad, Ziad; Khanna, Nitin; Kerr, Deborah A.; Boushey, Carol J.; Delp, Edward J.

2014-02-01

Many chronic diseases, including obesity and cancer, are related to diet. Such diseases may be prevented and/or successfully treated by accurately monitoring and assessing food and beverage intakes. Existing dietary assessment methods such as the 24-hour dietary recall and the food frequency questionnaire, are burdensome and not generally accurate. In this paper, we present a user interface for a mobile telephone food record that relies on taking images, using the built-in camera, as the primary method of recording. We describe the design and implementation of this user interface while stressing the solutions we devised to meet the requirements imposed by the image analysis process, yet keeping the user interface easy to use.

A Mobile Phone User Interface for Image-Based Dietary Assessment

PubMed Central

Ahmad, Ziad; Khanna, Nitin; Kerr, Deborah A.; Boushey, Carol J.; Delp, Edward J.

2016-01-01

Many chronic diseases, including obesity and cancer, are related to diet. Such diseases may be prevented and/or successfully treated by accurately monitoring and assessing food and beverage intakes. Existing dietary assessment methods such as the 24-hour dietary recall and the food frequency questionnaire, are burdensome and not generally accurate. In this paper, we present a user interface for a mobile telephone food record that relies on taking images, using the built-in camera, as the primary method of recording. We describe the design and implementation of this user interface while stressing the solutions we devised to meet the requirements imposed by the image analysis process, yet keeping the user interface easy to use. PMID:28572696

A Mobile Phone User Interface for Image-Based Dietary Assessment.

PubMed

Ahmad, Ziad; Khanna, Nitin; Kerr, Deborah A; Boushey, Carol J; Delp, Edward J

2014-02-02

Many chronic diseases, including obesity and cancer, are related to diet. Such diseases may be prevented and/or successfully treated by accurately monitoring and assessing food and beverage intakes. Existing dietary assessment methods such as the 24-hour dietary recall and the food frequency questionnaire, are burdensome and not generally accurate. In this paper, we present a user interface for a mobile telephone food record that relies on taking images, using the built-in camera, as the primary method of recording. We describe the design and implementation of this user interface while stressing the solutions we devised to meet the requirements imposed by the image analysis process, yet keeping the user interface easy to use.

Reduction of Unsteady Forcing in a Vaned, Contra-Rotating Transonic Turbine Configuration

NASA Technical Reports Server (NTRS)

Clark, John

2010-01-01

HPT blade unsteadiness in the presence of a downstream vane consistent with contra-rotation is characterized by strong interaction at the first harmonic of downstream vane passing. E An existing stage-and-one-half transonic turbine rig design was used as a baseline to investigate means of reducing such a blade-vane interaction. E Methods assessed included: Aerodynamic shaping of HPT blades 3D stacking of the downstream vane Steady pressure-side blowing E Of the methods assessed, a combination of vane bowing and steady pressure-side blowing produced the most favorable result. E Transonic turbine experiments are planned to assess predictive accuracy for the baseline turbine and any design improvements.

Cultural adaptation and translation of measures: an integrated method.

PubMed

Sidani, Souraya; Guruge, Sepali; Miranda, Joyal; Ford-Gilboe, Marilyn; Varcoe, Colleen

2010-04-01

Differences in the conceptualization and operationalization of health-related concepts may exist across cultures. Such differences underscore the importance of examining conceptual equivalence when adapting and translating instruments. In this article, we describe an integrated method for exploring conceptual equivalence within the process of adapting and translating measures. The integrated method involves five phases including selection of instruments for cultural adaptation and translation; assessment of conceptual equivalence, leading to the generation of a set of items deemed to be culturally and linguistically appropriate to assess the concept of interest in the target community; forward translation; back translation (optional); and pre-testing of the set of items. Strengths and limitations of the proposed integrated method are discussed. (c) 2010 Wiley Periodicals, Inc.

Development of More Cost-Effective Methods for Long-Term Monitoring of Soil Vapor Intrusion to Indoor Air Using Quantitative Passive Diffusive-Adsorptive Sampling Techniques

DTIC Science & Technology

2015-05-01

challenging component of assessing human health risks associated with contaminated soil and groundwater since the late 1990s, during which time...and analysis. 1.3 REGULATORY DRIVERS Regulatory guidance for assessment and management of risks associated with VI has been issued by at least 27...requirements to assess potential human health risks , and this possibility exists where VOCs are present in the subsurface near occupied buildings

Staffing effectiveness evaluation: a best kept secret for educational needs assessment.

PubMed

Hanna, Lee Ann

2005-01-01

Staff development educators use many sources of information to conduct educational needs assessments to improve existing educational programs and to develop new ones. Staffing effectiveness evaluation information targets patient care and staffing outcomes. The overall objective of this article is to familiarize staff development educators with the staffing effectiveness evaluation process, events that have led to organizational efforts to measure it, Joint Commission on Accreditation of Healthcare Organizations' (JCAHO) expectations, methods for assessing variation and relationships of indicators, and implications for staff development educators.

Effect of Blast-Induced Vibration from New Railway Tunnel on Existing Adjacent Railway Tunnel in Xinjiang, China

NASA Astrophysics Data System (ADS)

Liang, Qingguo; Li, Jie; Li, Dewu; Ou, Erfeng

2013-01-01

The vibrations of existing service tunnels induced by blast-excavation of adjacent tunnels have attracted much attention from both academics and engineers during recent decades in China. The blasting vibration velocity (BVV) is the most widely used controlling index for in situ monitoring and safety assessment of existing lining structures. Although numerous in situ tests and simulations had been carried out to investigate blast-induced vibrations of existing tunnels due to excavation of new tunnels (mostly by bench excavation method), research on the overall dynamical response of existing service tunnels in terms of not only BVV but also stress/strain seemed limited for new tunnels excavated by the full-section blasting method. In this paper, the impacts of blast-induced vibrations from a new tunnel on an existing railway tunnel in Xinjiang, China were comprehensively investigated by using laboratory tests, in situ monitoring and numerical simulations. The measured data from laboratory tests and in situ monitoring were used to determine the parameters needed for numerical simulations, and were compared with the calculated results. Based on the results from in situ monitoring and numerical simulations, which were consistent with each other, the original blasting design and corresponding parameters were adjusted to reduce the maximum BVV, which proved to be effective and safe. The effect of both the static stress before blasting vibrations and the dynamic stress induced by blasting on the total stresses in the existing tunnel lining is also discussed. The methods and related results presented could be applied in projects with similar ground and distance between old and new tunnels if the new tunnel is to be excavated by the full-section blasting method.

Concrete Condition Assessment Using Impact-Echo Method and Extreme Learning Machines

PubMed Central

Zhang, Jing-Kui; Yan, Weizhong; Cui, De-Mi

2016-01-01

The impact-echo (IE) method is a popular non-destructive testing (NDT) technique widely used for measuring the thickness of plate-like structures and for detecting certain defects inside concrete elements or structures. However, the IE method is not effective for full condition assessment (i.e., defect detection, defect diagnosis, defect sizing and location), because the simple frequency spectrum analysis involved in the existing IE method is not sufficient to capture the IE signal patterns associated with different conditions. In this paper, we attempt to enhance the IE technique and enable it for full condition assessment of concrete elements by introducing advanced machine learning techniques for performing comprehensive analysis and pattern recognition of IE signals. Specifically, we use wavelet decomposition for extracting signatures or features out of the raw IE signals and apply extreme learning machine, one of the recently developed machine learning techniques, as classification models for full condition assessment. To validate the capabilities of the proposed method, we build a number of specimens with various types, sizes, and locations of defects and perform IE testing on these specimens in a lab environment. Based on analysis of the collected IE signals using the proposed machine learning based IE method, we demonstrate that the proposed method is effective in performing full condition assessment of concrete elements or structures. PMID:27023563

Methods to estimate the transfer of contaminants into recycling products - A case study from Austria.

PubMed

Knapp, Julika; Allesch, Astrid; Müller, Wolfgang; Bockreis, Anke

2017-11-01

Recycling of waste materials is desirable to reduce the consumption of limited primary resources, but also includes the risk of recycling unwanted, hazardous substances. In Austria, the legal framework demands secondary products must not present a higher risk than comparable products derived from primary resources. However, the act provides no definition on how to assess this risk potential. This paper describes the development of different quantitative and qualitative methods to estimate the transfer of contaminants in recycling processes. The quantitative methods comprise the comparison of concentrations of harmful substances in recycling products to corresponding primary products and to existing limit values. The developed evaluation matrix, which considers further aspects, allows for the assessment of the qualitative risk potential. The results show that, depending on the assessed waste fraction, particular contaminants can be critical. Their concentrations were higher than in comparable primary materials and did not comply with existing limit values. On the other hand, the results show that a long-term, well-established quality control system can assure compliance with the limit values. The results of the qualitative assessment obtained with the evaluation matrix support the results of the quantitative assessment. Therefore, the evaluation matrix can be suitable to quickly screen waste streams used for recycling to estimate their potential environmental and health risks. To prevent the transfer of contaminants into product cycles, improved data of relevant substances in secondary resources are necessary. In addition, regulations for material recycling are required to assure adequate quality control measures, including limit values. Copyright © 2017 Elsevier Ltd. All rights reserved.

Development of a modified in vitro skin absorption method to study the epidermal/dermal disposition of a contact allergen in human skin.

PubMed

Pendlington, Ruth U; Minter, Helen J; Stupart, Leanne; MacKay, Cameron; Roper, Clive S; Sanders, David J; Pease, Camilla K

2008-01-01

In vitro skin absorption methods exist in Organisation for Economic Co-operation and Development (OECD) guideline form (No. 428) and are used to estimate the degree of systemic penetration of chemicals through skin. More detailed kinetics of permeation through skin compartments are not described well by existing methods. This study was designed to assess the practical feasibility of generating compartmental (stratum corneum/epidermal/dermal) disposition and kinetic data of topically applied chemicals. For chemically induced effects initiated in the skin (e.g., skin allergy), the delivery of tissue concentrations of chemical will impact the incidence and severity of biological effect. Explicit data on the kinetics of chemical disposition in skin have not traditionally been needed for skin allergy risk assessment: current in vivo assays embody delivery implicitly. Under the 7th Amendment to the European Cosmetics Directive, in vivo assays (such as the local lymph node assay for skin sensitization) will not be permitted to assess cosmetic ingredients. New in vitro and in silico alternative approaches and ways of predicting risk of adverse effects in humans need to be developed, and new methods such as that described here provide a way of estimating delivered concentrations and the effect of formulation changes on that delivery. As we continue to deconstruct the contributing factors of skin allergy in humans, it will be useful to have methods available that can measure skin tissue compartment exposure levels delivered from different exposure use scenarios. Here we provide such a method. The method could also be used to generate useful data for developing in silico kinetic models of compartmental skin delivery and for refining data for skin delivery in relation to the evaluation of systemic toxicity.

History of the international societies in health technology assessment: International Society for Technology Assessment in Health Care and Health Technology Assessment International.

PubMed

Banta, David; Jonsson, Egon; Childs, Paul

2009-07-01

The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.

Comparing biomarkers as principal surrogate endpoints.

PubMed

Huang, Ying; Gilbert, Peter B

2011-12-01

Recently a new definition of surrogate endpoint, the "principal surrogate," was proposed based on causal associations between treatment effects on the biomarker and on the clinical endpoint. Despite its appealing interpretation, limited research has been conducted to evaluate principal surrogates, and existing methods focus on risk models that consider a single biomarker. How to compare principal surrogate value of biomarkers or general risk models that consider multiple biomarkers remains an open research question. We propose to characterize a marker or risk model's principal surrogate value based on the distribution of risk difference between interventions. In addition, we propose a novel summary measure (the standardized total gain) that can be used to compare markers and to assess the incremental value of a new marker. We develop a semiparametric estimated-likelihood method to estimate the joint surrogate value of multiple biomarkers. This method accommodates two-phase sampling of biomarkers and is more widely applicable than existing nonparametric methods by incorporating continuous baseline covariates to predict the biomarker(s), and is more robust than existing parametric methods by leaving the error distribution of markers unspecified. The methodology is illustrated using a simulated example set and a real data set in the context of HIV vaccine trials. © 2011, The International Biometric Society.

Evaluating attention in delirium: A comparison of bedside tests of attention.

PubMed

Adamis, Dimitrios; Meagher, David; Murray, Orla; O'Neill, Donagh; O'Mahony, Edmond; Mulligan, Owen; McCarthy, Geraldine

2016-09-01

Impaired attention is a core diagnostic feature for delirium. The present study examined the discriminating properties for patients with delirium versus those with dementia and/or no neurocognitive disorder of four objective tests of attention: digit span, vigilance "A" test, serial 7s subtraction and months of the year backwards together with global clinical subjective rating of attention. This as a prospective study of older patients admitted consecutively in a general hospital. Participants were assessed using the Confusion Assessment Method, Delirium Rating Scale-98 Revised and Montreal Cognitive Assessment scales, and months of the year backwards. Pre-existing dementia was diagnosed according to the Diagnostic and Statistical Manual of Mental Disorders fourth edition criteria. The sample consisted of 200 participants (mean age 81.1 ± 6.5 years; 50% women; pre-existing cognitive impairment in 126 [63%]). A total of 34 (17%) were identified with delirium (Confusion Assessment Method +). The five approaches to assessing attention had statistically significant correlations (P < 0.05). Discriminant analysis showed that clinical subjective rating of attention in conjunction with the months of the year backwards had the best discriminatory ability to identify Confusion Assessment Method-defined delirium, and to discriminate patients with delirium from those with dementia and/or normal cognition. Both of these approaches had high sensitivity, but modest specificity. Objective tests are useful for prediction of non-delirium, but lack specificity for a delirium diagnosis. Global attentional deficits were more indicative of delirium than deficits of specific domains of attention. Geriatr Gerontol Int 2016; 16: 1028-1035. © 2015 The Authors. Geriatrics & Gerontology International published by. Wiley Publishing Asia Pty Ltd on behalf of Japanese Geriatrics Society.

REVIEW OF QUANTITATIVE STANDARDS AND GUIDELINES FOR FUNGI IN INDOOR AIR

EPA Science Inventory

Exposure to fungal aerosols clearly causes human disease. However, methods for assessing exposure remain poorly understood, and guidelines for interpreting data are often contradictory. The purposes of this paper are to review and compare existing guidelines for indoor airborne...

Documentary analysis as an assessment tool.

PubMed

Lawson, Lauren V

2018-05-29

Documentary analysis of existing information, such as newspaper articles, is an identified method for use in an assessment to provide a descriptive explanation of existing problems or assets. The intention of this case study is to explore the effectiveness of documentary analysis of newspaper articles as a tool to inform an assessment of factors influencing the implementation of a medical respite for the homeless. Two questions framed the assessment; (a) What was occurring or might occur that will affect the development of a medical respite; and (b) What opportunities or threats are generated as a result? Articles from two local newspapers identified themes related to the three external forces of change that impact medical respites; (a) funding; (b) community resistance; and (c) the health care system. Three themes emerged: a) uncertain funding; b) neighborhood resistance, and c) improved access to healthcare would result from the Affordable Care Act. Use of documentary analysis of newspaper articles provided applicable content for the assessment. Themes from the assessment informed strategic planning, such as addressing potential neighborhood resistance. © 2018 Wiley Periodicals, Inc.

An improved method to represent DEM uncertainty in glacial lake outburst flood propagation using stochastic simulations

NASA Astrophysics Data System (ADS)

Watson, Cameron S.; Carrivick, Jonathan; Quincey, Duncan

2015-10-01

Modelling glacial lake outburst floods (GLOFs) or 'jökulhlaups', necessarily involves the propagation of large and often stochastic uncertainties throughout the source to impact process chain. Since flood routing is primarily a function of underlying topography, communication of digital elevation model (DEM) uncertainty should accompany such modelling efforts. Here, a new stochastic first-pass assessment technique was evaluated against an existing GIS-based model and an existing 1D hydrodynamic model, using three DEMs with different spatial resolution. The analysis revealed the effect of DEM uncertainty and model choice on several flood parameters and on the prediction of socio-economic impacts. Our new model, which we call MC-LCP (Monte Carlo Least Cost Path) and which is distributed in the supplementary information, demonstrated enhanced 'stability' when compared to the two existing methods, and this 'stability' was independent of DEM choice. The MC-LCP model outputs an uncertainty continuum within its extent, from which relative socio-economic risk can be evaluated. In a comparison of all DEM and model combinations, the Shuttle Radar Topography Mission (SRTM) DEM exhibited fewer artefacts compared to those with the Advanced Spaceborne Thermal Emission and Reflection Radiometer Global Digital Elevation Model (ASTER GDEM), and were comparable to those with a finer resolution Advanced Land Observing Satellite Panchromatic Remote-sensing Instrument for Stereo Mapping (ALOS PRISM) derived DEM. Overall, we contend that the variability we find between flood routing model results suggests that consideration of DEM uncertainty and pre-processing methods is important when assessing flow routing and when evaluating potential socio-economic implications of a GLOF event. Incorporation of a stochastic variable provides an illustration of uncertainty that is important when modelling and communicating assessments of an inherently complex process.

A conceptual guide to detection probability for point counts and other count-based survey methods

Treesearch

D. Archibald McCallum

2005-01-01

Accurate and precise estimates of numbers of animals are vitally needed both to assess population status and to evaluate management decisions. Various methods exist for counting birds, but most of those used with territorial landbirds yield only indices, not true estimates of population size. The need for valid density estimates has spawned a number of models for...

Evaluation of the performance of existing non-laboratory based cardiovascular risk assessment algorithms

PubMed Central

2013-01-01

Background The high burden and rising incidence of cardiovascular disease (CVD) in resource constrained countries necessitates implementation of robust and pragmatic primary and secondary prevention strategies. Many current CVD management guidelines recommend absolute cardiovascular (CV) risk assessment as a clinically sound guide to preventive and treatment strategies. Development of non-laboratory based cardiovascular risk assessment algorithms enable absolute risk assessment in resource constrained countries. The objective of this review is to evaluate the performance of existing non-laboratory based CV risk assessment algorithms using the benchmarks for clinically useful CV risk assessment algorithms outlined by Cooney and colleagues. Methods A literature search to identify non-laboratory based risk prediction algorithms was performed in MEDLINE, CINAHL, Ovid Premier Nursing Journals Plus, and PubMed databases. The identified algorithms were evaluated using the benchmarks for clinically useful cardiovascular risk assessment algorithms outlined by Cooney and colleagues. Results Five non-laboratory based CV risk assessment algorithms were identified. The Gaziano and Framingham algorithms met the criteria for appropriateness of statistical methods used to derive the algorithms and endpoints. The Swedish Consultation, Framingham and Gaziano algorithms demonstrated good discrimination in derivation datasets. Only the Gaziano algorithm was externally validated where it had optimal discrimination. The Gaziano and WHO algorithms had chart formats which made them simple and user friendly for clinical application. Conclusion Both the Gaziano and Framingham non-laboratory based algorithms met most of the criteria outlined by Cooney and colleagues. External validation of the algorithms in diverse samples is needed to ascertain their performance and applicability to different populations and to enhance clinicians’ confidence in them. PMID:24373202

The effect of texture granularity on texture synthesis quality

NASA Astrophysics Data System (ADS)

Golestaneh, S. Alireza; Subedar, Mahesh M.; Karam, Lina J.

2015-09-01

Natural and artificial textures occur frequently in images and in video sequences. Image/video coding systems based on texture synthesis can make use of a reliable texture synthesis quality assessment method in order to improve the compression performance in terms of perceived quality and bit-rate. Existing objective visual quality assessment methods do not perform satisfactorily when predicting the synthesized texture quality. In our previous work, we showed that texture regularity can be used as an attribute for estimating the quality of synthesized textures. In this paper, we study the effect of another texture attribute, namely texture granularity, on the quality of synthesized textures. For this purpose, subjective studies are conducted to assess the quality of synthesized textures with different levels (low, medium, high) of perceived texture granularity using different types of texture synthesis methods.

Accident Prevention and Diagnostics of Underground Pipeline Systems

NASA Astrophysics Data System (ADS)

Trokhimchuk, M.; Bakhracheva, Y.

2017-11-01

Up to forty thousand accidents occur annually with underground pipelines due to corrosion. The comparison of the methods for assessing the quality of anti-corrosion coating is provided. It is proposed to use the device to be tied-in to existing pipeline which has a higher functionality in comparison with other types of the devices due to the possibility of tie-in to the pipelines with different diameters. The existing technologies and applied materials allow us to organize industrial production of the proposed device.

Robot-aided assessment of lower extremity functions: a review.

PubMed

Maggioni, Serena; Melendez-Calderon, Alejandro; van Asseldonk, Edwin; Klamroth-Marganska, Verena; Lünenburger, Lars; Riener, Robert; van der Kooij, Herman

2016-08-02

The assessment of sensorimotor functions is extremely important to understand the health status of a patient and its change over time. Assessments are necessary to plan and adjust the therapy in order to maximize the chances of individual recovery. Nowadays, however, assessments are seldom used in clinical practice due to administrative constraints or to inadequate validity, reliability and responsiveness. In clinical trials, more sensitive and reliable measurement scales could unmask changes in physiological variables that would not be visible with existing clinical scores.In the last decades robotic devices have become available for neurorehabilitation training in clinical centers. Besides training, robotic devices can overcome some of the limitations in traditional clinical assessments by providing more objective, sensitive, reliable and time-efficient measurements. However, it is necessary to understand the clinical needs to be able to develop novel robot-aided assessment methods that can be integrated in clinical practice.This paper aims at providing researchers and developers in the field of robotic neurorehabilitation with a comprehensive review of assessment methods for the lower extremities. Among the ICF domains, we included those related to lower extremities sensorimotor functions and walking; for each chapter we present and discuss existing assessments used in routine clinical practice and contrast those to state-of-the-art instrumented and robot-aided technologies. Based on the shortcomings of current assessments, on the identified clinical needs and on the opportunities offered by robotic devices, we propose future directions for research in rehabilitation robotics. The review and recommendations provided in this paper aim to guide the design of the next generation of robot-aided functional assessments, their validation and their translation to clinical practice.

Assessment and Rehabilitation Issues Concerning Existing 70’s Structural Stock

NASA Astrophysics Data System (ADS)

Sabareanu, E.

2017-06-01

The last 30 years were very demanding in terms of norms and standards change concerning the structural calculus for buildings, leaving a large stock of structures erected during 70-90 decades in a weak position concerning seismic loads and loads level for live loads, wind and snow. In the same time, taking into account that a large amount of buildings are in service all over the country, they cannot be demolished, but suitable rehabilitation methods should be proposed, structural durability being achieved. The paper proposes some rehabilitation methods suitable in terms of structural safety and cost optimization for diaphragm reinforced concrete structures, with an example on an existing multi storey building.

Analysis of Existing Guidelines for the Systematic Planning Process of Clinical Registries.

PubMed

Löpprich, Martin; Knaup, Petra

2016-01-01

Clinical registries are a powerful method to observe the clinical practice and natural disease history. In contrast to clinical trials, where guidelines and standardized methods exist and are mandatory, only a few initiatives have published methodological guidelines for clinical registries. The objective of this paper was to review these guidelines and systematically assess their completeness, usability and feasibility according to a SWOT analysis. The results show that each guideline has its own strengths and weaknesses. While one supports the systematic planning process, the other discusses clinical registries in great detail. However, the feasibility was mostly limited and the special requirements of clinical registries, their flexible, expandable and adaptable technological structure was not addressed consistently.

Business Training and Education Needs of Chiropractors

PubMed Central

Henson, Steve W; Pressley, Milton; Korfmann, Scott

2008-01-01

Objective: This report is an examination of the perceived need for business skills among chiropractors. Methods: An online survey was completed by 64 chiropractors. They assessed the need for business skills and current levels of business skills. Using this information, gaps in business skills are identified. Results: The need for business skills is broad, encompassing all major business functions. Existing business skills are well below needed levels. Conclusion: The chiropractic profession needs significantly greater business and practice management skills. The existing gap between needed business skills and existing skills suggests that current training and education programs are not providing adequate business skills training PMID:19043535

Summary information of human health hazard assessment of existing chemical substances (I).

PubMed

Matsumoto, Mariko; Kobayashi, Katsumi; Takahashi, Mika; Hirata-Koizumi, Mutsuko; Ono, Atsushi; Hirose, Akihiko

2015-01-01

Under the Chemical Substances Control Law (CSCL) in Japan, initial hazard information tor existing chemical substances has been collected by the Ministry of Health, Labour and Welfare, Japan (MHLW) to assess potential initial risks to human health. We have reviewed all collected toxicity information pertaining to acute toxicity, repeated dose toxicity, genotoxicity, and/or reproductive/developmental toxicity and performed hazard assessments. Approximately 150 substances are currently undergoing review and assessment. For clarification and evaluation of each toxicity study, we have created a dossier (a collection of study data containing a detailed summary of the methods, results, and conclusions of each study) in English using the International Uniform Chemical Information Database (IUCLID) version 5. The IUCLID dossier format is widely used and has been accepted as one of the most beneficial formats for providing summarized chemical substance toxicity assessments. In this report, as a contribution to our ongoing hazard assessment activity, we present summary hazard information related to the potential human health effects of the following 5 chemical substances: 4-chlorobenzoyl chloride (CAS: 122-01-0); benzenesulfonic acid, 4-hydroxy-, tin (2+) salt (CAS: 70974- 33-3); chlorocyclohexane (CAS: 542-18-7); 1,3-cyclohexanedimethanamine (CAS: 2579-20-6); and 1,3,5-triazine-2,4,6 (1H,3H,5H) -trithione (CAS: 638-16-4). The IUCLID dossiers created for these 5 chemical substances will be made available via the Japan Existing Chemical Data Base (JECDB) at . Additional human health hazard information on existing chemical substances will be provided using the same methodology and website when it is available.

Assessing rockfall susceptibility in steep and overhanging slopes using three-dimensional analysis of failure mechanisms

USGS Publications Warehouse

Matasci, Battista; Stock, Greg M.; Jaboyedoff, Michael; Carrea, Dario; Collins, Brian D.; Guérin, Antoine; Matasci, G.; Ravanel, L.

2018-01-01

Rockfalls strongly influence the evolution of steep rocky landscapes and represent a significant hazard in mountainous areas. Defining the most probable future rockfall source areas is of primary importance for both geomorphological investigations and hazard assessment. Thus, a need exists to understand which areas of a steep cliff are more likely to be affected by a rockfall. An important analytical gap exists between regional rockfall susceptibility studies and block-specific geomechanical calculations. Here we present methods for quantifying rockfall susceptibility at the cliff scale, which is suitable for sub-regional hazard assessment (hundreds to thousands of square meters). Our methods use three-dimensional point clouds acquired by terrestrial laser scanning to quantify the fracture patterns and compute failure mechanisms for planar, wedge, and toppling failures on vertical and overhanging rock walls. As a part of this work, we developed a rockfall susceptibility index for each type of failure mechanism according to the interaction between the discontinuities and the local cliff orientation. The susceptibility for slope parallel exfoliation-type failures, which are generally hard to identify, is partly captured by planar and toppling susceptibility indexes. We tested the methods for detecting the most susceptible rockfall source areas on two famously steep landscapes, Yosemite Valley (California, USA) and the Drus in the Mont-Blanc massif (France). Our rockfall susceptibility models show good correspondence with active rockfall sources. The methods offer new tools for investigating rockfall hazard and improving our understanding of rockfall processes.

Development of a technical assistance framework for building organizational capacity of health programs in resource-limited settings.

PubMed

Reyes, E Michael; Sharma, Anjali; Thomas, Kate K; Kuehn, Chuck; Morales, José Rafael

2014-09-17

Little information exists on the technical assistance needs of local indigenous organizations charged with managing HIV care and treatment programs funded by the US President's Emergency Plan for AIDS Relief (PEPFAR). This paper describes the methods used to adapt the Primary Care Assessment Tool (PCAT) framework, which has successfully strengthened HIV primary care services in the US, into one that could strengthen the capacity of local partners to deliver priority health programs in resource-constrained settings by identifying their specific technical assistance needs. Qualitative methods and inductive reasoning approaches were used to conceptualize and adapt the new Clinical Assessment for Systems Strengthening (ClASS) framework. Stakeholder interviews, comparisons of existing assessment tools, and a pilot test helped determine the overall ClASS framework for use in low-resource settings. The framework was further refined one year post-ClASS implementation. Stakeholder interviews, assessment of existing tools, a pilot process and the one-year post- implementation assessment informed the adaptation of the ClASS framework for assessing and strengthening technical and managerial capacities of health programs at three levels: international partner, local indigenous partner, and local partner treatment facility. The PCAT focus on organizational strengths and systems strengthening was retained and implemented in the ClASS framework and approach. A modular format was chosen to allow the use of administrative, fiscal and clinical modules in any combination and to insert new modules as needed by programs. The pilot led to refined pre-visit planning, informed review team composition, increased visit duration, and restructured modules. A web-based toolkit was developed to capture three years of experiential learning; this kit can also be used for independent implementation of the ClASS framework. A systematic adaptation process has produced a qualitative framework that can inform implementation strategies in support of country led HIV care and treatment programs. The framework, as a well-received iterative process focused on technical assistance, may have broader utility in other global programs.

Use of multi-criteria decision analysis to identify potentially dangerous glacial lakes.

PubMed

Kougkoulos, Ioannis; Cook, Simon J; Jomelli, Vincent; Clarke, Leon; Symeonakis, Elias; Dortch, Jason M; Edwards, Laura A; Merad, Myriam

2018-04-15

Glacial Lake Outburst Floods (GLOFs) represent a significant threat in deglaciating environments, necessitating the development of GLOF hazard and risk assessment procedures. Here, we outline a Multi-Criteria Decision Analysis (MCDA) approach that can be used to rapidly identify potentially dangerous lakes in regions without existing tailored GLOF risk assessments, where a range of glacial lake types exist, and where field data are sparse or non-existent. Our MCDA model (1) is desk-based and uses freely and widely available data inputs and software, and (2) allows the relative risk posed by a range of glacial lake types to be assessed simultaneously within any region. A review of the factors that influence GLOF risk, combined with the strict rules of criteria selection inherent to MCDA, has allowed us to identify 13 exhaustive, non-redundant, and consistent risk criteria. We use our MCDA model to assess the risk of 16 extant glacial lakes and 6 lakes that have already generated GLOFs, and found that our results agree well with previous studies. For the first time in GLOF risk assessment, we employed sensitivity analyses to test the strength of our model results and assumptions, and to identify lakes that are sensitive to the criteria and risk thresholds used. A key benefit of the MCDA method is that sensitivity analyses are readily undertaken. Overall, these sensitivity analyses lend support to our model, although we suggest that further work is required to determine the relative importance of assessment criteria, and the thresholds that determine the level of risk for each criterion. As a case study, the tested method was then applied to 25 potentially dangerous lakes in the Bolivian Andes, where GLOF risk is poorly understood; 3 lakes are found to pose 'medium' or 'high' risk, and require further detailed investigation. Copyright © 2017 Elsevier B.V. All rights reserved.

Improved tsunami impact assessments: validation, comparison and the integration of hydrodynamic modeling

NASA Astrophysics Data System (ADS)

Tarbotton, C.; Walters, R. A.; Goff, J. R.; Dominey-Howes, D.; Turner, I. L.

2012-12-01

As communities become increasingly aware of the risks posed by tsunamis, it is important to develop methods for predicting the damage they can cause to the built environment. This will provide the information needed to make informed decisions regarding land-use, building codes, and evacuation. At present, a number of tsunami-building vulnerability assessment models are available, however, the relative infrequency and destructive nature of tsunamis has long made it difficult to obtain the data necessary to adequately validate and compare them. Further complicating matters is that the inundation of a tsunami in the built environment is very difficult model, as is the response of a building to the hydraulic forces that a tsunami generates. Variations in building design and condition will significantly affect a building's susceptibility to damage. Likewise, factors affecting the flow conditions at a building (i.e. surrounding structures and topography), will greatly affect its exposure. This presents significant challenges for practitioners, as they are often left in the dark on how to use hazard modeling and vulnerability assessment techniques together to conduct the community-scale impact studies required for tsunami planning. This paper presents the results of an in-depth case study of Yuriage, Miyagi Prefecture - a coastal city in Japan that was badly damaged by the 2011 Tohoku tsunami. The aim of the study was twofold: 1) To test and compare existing tsunami vulnerability assessment models and 2) To more effectively utilize hydrodynamic models in the context of tsunami impact studies. Following the 2011 Tohoku event, an unprecedented quantity of field data, imagery and video emerged. Yuriage in particular, features a comprehensive set of street level Google Street View imagery, available both before and after the event. This has enabled the collection of a large dataset describing the characteristics of the buildings existing before the event as well the subsequent damage that they sustained during. These data together with the detailed results from hydrodynamic models have been used to provide the building, damage and hazard data necessary to rigorously test and compare existing vulnerability assessments techniques. The result is a much-improved understanding of the capabilities of existing vulnerability assessment techniques, as well as important improvements to their assessment framework This provides much needed guidance to practitioners on how to conduct tsunami impact assessments in the future. Furthermore, the study introduces some new methods of integrating hydrodynamic models into vulnerability assessment models, offering guidance on how to more effectively model tsunami inundation in the built environment.

Method optimization for fathead minnow (Pimephales promelas) liver S9 isolation

EPA Science Inventory

Standard protocols have been proposed to assess metabolic stability in rainbow trout liver S9 fractions. Using in vitro substrate depletion assays, in vitro intrinsic clearance rates can be calculated for a variety of study compounds. Existing protocols suggest potential adaptati...

The Aggregate Exposure Pathway (AEP): A conceptual framework for advancing exposure science research and applications

EPA Science Inventory

Historically, risk assessment has relied upon toxicological data to obtain hazard-based reference levels, which are subsequently compared to exposure estimates to determine whether an unacceptable risk to public health may exist. Recent advances in analytical methods, biomarker ...

Military Support for Youth Development: An Exploratory Analysis

DTIC Science & Technology

1994-01-01

This report assesses existing evidence about the potential of military service and training as methods to prepare disadvantaged youth for productive...whether veterans in general receive a positive or negative return to military service; for disadvantaged veterans, it suggests little if any effect. Results

Risk analysis within environmental impact assessment of proposed construction activity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zeleňáková, Martina; Zvijáková, Lenka

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation ofmore » the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.« less

A Bayesian method for using simulator data to enhance human error probabilities assigned by existing HRA methods

DOE PAGES

Groth, Katrina M.; Smith, Curtis L.; Swiler, Laura P.

2014-04-05

In the past several years, several international agencies have begun to collect data on human performance in nuclear power plant simulators [1]. This data provides a valuable opportunity to improve human reliability analysis (HRA), but there improvements will not be realized without implementation of Bayesian methods. Bayesian methods are widely used in to incorporate sparse data into models in many parts of probabilistic risk assessment (PRA), but Bayesian methods have not been adopted by the HRA community. In this article, we provide a Bayesian methodology to formally use simulator data to refine the human error probabilities (HEPs) assigned by existingmore » HRA methods. We demonstrate the methodology with a case study, wherein we use simulator data from the Halden Reactor Project to update the probability assignments from the SPAR-H method. The case study demonstrates the ability to use performance data, even sparse data, to improve existing HRA methods. Furthermore, this paper also serves as a demonstration of the value of Bayesian methods to improve the technical basis of HRA.« less

Gait and Lower Limb Observation of Paediatrics (GALLOP): development of a consensus based paediatric podiatry and physiotherapy standardised recording proforma.

PubMed

Cranage, Simone; Banwell, Helen; Williams, Cylie M

2016-01-01

Paediatric gait and lower limb assessments are frequently undertaken in podiatry and physiotherapy clinical practice and this is a growing area of expertise within Australia. No concise paediatric standardised recording proforma exists to assist clinicians in clinical practice. The aim of this study was to develop a gait and lower limb standardised recording proforma guided by the literature and consensus, for assessment of the paediatric foot and lower limb in children aged 0-18 years. Expert Australian podiatrists and physiotherapists were invited to participate in a three round Delphi survey panel using the online Qualtrics(©) survey platform. The first round of the survey consisted of open-ended questions on paediatric gait and lower limb assessment developed from existing templates and a literature search of standardised lower limb assessment methods. Rounds two and three consisted of statements developed from the first round responses. Questions and statements were included in the final proforma if 70 % or more of the participants indicated consensus or agreement with the assessment method and if there was support within the literature for paediatric age-specific normative data with acceptable reliability of outcome measures. There were 17 of the 21 (81 %) participants who completed three rounds of the survey. Consensus was achieved for 41 statements in Round one, 54 statements achieved agreement in two subsequent rounds. Participants agreed on 95 statements relating to birth history, developmental history, hip measurement, rotation of the lower limb, ankle range of motion, foot posture, balance and gait. Assessments with acceptable validity and reliability were included within the final Gait and Lower Limb Observation of Paediatrics (GALLOP) proforma. The GALLOP proforma is a consensus based, systematic and standardised way to collect information and outcome measures in paediatric lower limb assessment. This standardised recording proforma will assist professions to collect information in a standardised format based on best evidence assessment methods whilst aiding consistency in communication between health professionals.

The Water-Energy-Food Nexus: A systematic review of methods for nexus assessment

NASA Astrophysics Data System (ADS)

Albrecht, Tamee R.; Crootof, Arica; Scott, Christopher A.

2018-04-01

The water-energy-food (WEF) nexus is rapidly expanding in scholarly literature and policy settings as a novel way to address complex resource and development challenges. The nexus approach aims to identify tradeoffs and synergies of water, energy, and food systems, internalize social and environmental impacts, and guide development of cross-sectoral policies. However, while the WEF nexus offers a promising conceptual approach, the use of WEF nexus methods to systematically evaluate water, energy, and food interlinkages or support development of socially and politically-relevant resource policies has been limited. This paper reviews WEF nexus methods to provide a knowledge base of existing approaches and promote further development of analytical methods that align with nexus thinking. The systematic review of 245 journal articles and book chapters reveals that (a) use of specific and reproducible methods for nexus assessment is uncommon (less than one-third); (b) nexus methods frequently fall short of capturing interactions among water, energy, and food—the very linkages they conceptually purport to address; (c) assessments strongly favor quantitative approaches (nearly three-quarters); (d) use of social science methods is limited (approximately one-quarter); and (e) many nexus methods are confined to disciplinary silos—only about one-quarter combine methods from diverse disciplines and less than one-fifth utilize both quantitative and qualitative approaches. To help overcome these limitations, we derive four key features of nexus analytical tools and methods—innovation, context, collaboration, and implementation—from the literature that reflect WEF nexus thinking. By evaluating existing nexus analytical approaches based on these features, we highlight 18 studies that demonstrate promising advances to guide future research. This paper finds that to address complex resource and development challenges, mixed-methods and transdisciplinary approaches are needed that incorporate social and political dimensions of water, energy, and food; utilize multiple and interdisciplinary approaches; and engage stakeholders and decision-makers.

CFD-Predicted Tile Heating Bump Factors Due to Tile Overlay Repairs

NASA Technical Reports Server (NTRS)

Lessard, Victor R.

2006-01-01

A Computational Fluid Dynamics investigation of the Orbiter's Tile Overlay Repair (TOR) is performed to assess the aeroheating Damage Assessment Team's (DAT) existing heating correlation method for protuberance interference heating on the surrounding thermal protection system. Aerothermodynamic heating analyses are performed for TORs at the design reference damage locations body points 1800 and 1075 for a Mach 17.9 and a=39deg STS-107 flight trajectory point with laminar flow. Six different cases are considered. The computed peak heating bump factor on the surrounding tiles are below the DAT's heating bump factor values for smooth tile cases. However, for the uneven tiles cases the peak interference heating is shown to be considerably higher than the existing correlation prediction.

(1)H nuclear magnetic resonance (NMR) as a tool to measure dehydration in mice.

PubMed

Li, Matthew; Vassiliou, Christophoros C; Colucci, Lina A; Cima, Michael J

2015-08-01

Dehydration is a prevalent pathology, where loss of bodily water can result in variable symptoms. Symptoms can range from simple thirst to dire scenarios involving loss of consciousness. Clinical methods exist that assess dehydration from qualitative weight changes to more quantitative osmolality measurements. These methods are imprecise, invasive, and/or easily confounded, despite being practiced clinically. We investigate a non-invasive, non-imaging (1)H NMR method of assessing dehydration that attempts to address issues with existing clinical methods. Dehydration was achieved by exposing mice (n = 16) to a thermally elevated environment (37 °C) for up to 7.5 h (0.11-13% weight loss). Whole body NMR measurements were made using a Bruker LF50 BCA-Analyzer before and after dehydration. Physical lean tissue, adipose, and free water compartment approximations had NMR values extracted from relaxation data through a multi-exponential fitting method. Changes in before/after NMR values were compared with clinically practiced metrics of weight loss (percent dehydration) as well as blood and urine osmolality. A linear correlation between tissue relaxometry and both animal percent dehydration and urine osmolality was observed in lean tissue, but not adipose or free fluids. Calculated R(2) values for percent dehydration were 0.8619 (lean, P < 0.0001), 0.5609 (adipose, P = 0.0008), and 0.0644 (free fluids, P = 0.3445). R(2) values for urine osmolality were 0.7760 (lean, P < 0.0001), 0.5005 (adipose, P = 0.0022), and 0.0568 (free fluids, P = 0.3739). These results suggest that non-imaging (1)H NMR methods are capable of non-invasively assessing dehydration in live animals. Copyright © 2015 John Wiley & Sons, Ltd.

Spillway sizing of large dams in Austria

NASA Astrophysics Data System (ADS)

Reszler, Ch.; Gutknecht, D.; Blöschl, G.

2003-04-01

This paper discusses the basic philosophy of defining and calculating design floods for large dams in Austria, both for the construction of new dams and for a re-assessment of the safety of existing dams. Currently the consensus is to choose flood peak values corresponding to a probability of exceedance of 2*10-4 for a given year. A two step procedure is proposed to estimate the design flood discharges - a rapid assessment and a detailed assessment. In the rapid assessment the design discharge is chosen as a constant multiple of flood values read from a map of regionalised floods. The safety factor or multiplier takes care of the uncertainties of the local estimation and the regionalisation procedure. If the current design level of a spillway exceeds the value so estimated, no further calculations are needed. Otherwise (and for new dams) a detailed assessment is required. The idea of the detailed assessment is to draw upon all existing sources of information to constrain the uncertainties. The three main sources are local flood frequency analysis, where flood data are available; regional flood estimation from hydrologically similar catchments; and rainfall-runoff modelling using design storms as inputs. The three values obtained by these methods are then assessed and weighted in terms of their reliability to facilitate selection of the design flood. The uncertainty assessment of the various methods is based on confidence intervals, estimates of regional heterogeneity, data availability and sensitivity analyses of the rainfall-runoff model. As the definition of the design floods discussed above is based on probability concepts it is also important to examine the excess risk, i.e. the possibility of the occurrence of a flood exceeding the design levels. The excess risk is evaluated based on a so called Safety Check Flood (SCF), similar to the existing practice in other countries in Europe. The SCF is a vehicle to analyse the damage potential of an event of this magnitude. This is to provide guidance for protective measures to dealing with very extreme floods. The SCF is used to check the vulnerability of the system with regard to structural stability, morphological effects, etc., and to develop alarm plans and disaster mitigation procedures. The basis for estimating the SCF are the uncertainty assessments of the design flood values estimated by the three methods including unlikely combinations of the controlling factors and attending uncertainties. Finally we discuss the impact on the downstream valley of floods exceeding the design values and of smaller floods and illustrate the basic concepts by examples from the recent flood in August 2002.

Improving Measures of Work-Related Physical Functioning

PubMed Central

McDonough, Christine M.; Ni, Pengsheng; Peterik, Kara; Marfeo, Elizabeth E.; Marino, Molly E.; Meterko, Mark; Rasch, Elizabeth K; Brandt, Diane E.; Jette, Alan M; Chan, Leighton

2016-01-01

Purpose To expand content of the physical function domain of the Work Disability Functional Assessment Battery (WD-FAB), developed for the US Social Security Administration’s (SSA) disability determination process. Methods Newly developed questions were administered to 3,532 recent SSA applicants for work disability benefits and 2,025 US adults. Factor analyses and item response theory (IRT) methods were used to calibrate and link the new items to existing WD-FAB, and computer-adaptive test simulations were conducted. Results Factor and IRT analyses supported integration of 44 new items into 3 existing WD-FAB scales and the addition of a new 11-item scale (Community Mobility). The final physical function domain consisting of: Basic Mobility (56 items), Upper Body Function (34 items), Fine Motor Function (45 items), and Community Mobility (11 items) demonstrated acceptable psychometric properties. Conclusions The WD-FAB offers an important tool for enhancement of work disability determination. The FAB could provide relevant information about work-related functioning for initial assessment of claimants, identifying denied applicants who may benefit from interventions to improve work and health outcomes; enhancing periodic review of work disability beneficiaries; and assessing outcomes for policies, programs and services targeting people with work disability. PMID:28005243

Inventory Data Package for Hanford Assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kincaid, Charles T.; Eslinger, Paul W.; Aaberg, Rosanne L.

2006-06-01

This document presents the basis for a compilation of inventory for radioactive contaminants of interest by year for all potentially impactive waste sites on the Hanford Site for which inventory data exist in records or could be reasonably estimated. This document also includes discussions of the historical, current, and reasonably foreseeable (1944 to 2070) future radioactive waste and waste sites; the inventories of radionuclides that may have a potential for environmental impacts; a description of the method(s) for estimating inventories where records are inadequate; a description of the screening method(s) used to select those sites and contaminants that might makemore » a substantial contribution to impacts; a listing of the remedial actions and their completion dates for waste sites; and tables showing the best estimate inventories available for Hanford assessments.« less

Portfolio assessment and evaluation: implications and guidelines for clinical nursing education.

PubMed

Chabeli, M M

2002-08-01

With the advent of Outcomes-Based Education in South Africa, the quality of nursing education is debatable, especially with regard to the assessment and evaluation of clinical nursing education, which is complex and renders the validity and reliability of the methods used questionable. This paper seeks to explore and describe the use of portfolio assessment and evaluation, its implications and guidelines for its effective use in nursing education. Firstly, the concepts of assessment, evaluation, portfolio and alternative methods of evaluation are defined. Secondly, a comparison of the characteristics of the old (traditional) methods and the new alternative methods of evaluation is made. Thirdly, through deductive analysis, synthesis and inference, implications and guidelines for the effective use of portfolio assessment and evaluation are described. In view of the qualitative, descriptive and exploratory nature of the study, a focus group interview with twenty students following a post-basic degree at a university in Gauteng regarding their perceptions on the use of portfolio assessment and evaluation method in clinical nursing education was used. A descriptive method of qualitative data analysis of open coding in accordance with Tesch's protocol (in Creswell 1994:155) was used. Resultant implications and guidelines were conceptualised and described within the existing theoretical framework. Principles of trustworthiness were maintained as described by (Lincoln & Guba 1985:290-327). Ethical considerations were in accordance with DENOSA's standards of research (1998:7).

Reconsidering the psychometrics of quality of life assessment in light of response shift and appraisal

PubMed Central

Schwartz, Carolyn E; Rapkin, Bruce D

2004-01-01

The increasing evidence for response shift phenomena in quality of life (QOL) assessment points to the necessity to reconsider both the measurement model and the application of psychometric analyses. The proposed psychometric model posits that the QOL true score is always contingent upon parameters of the appraisal process. This new model calls into question existing methods for establishing the reliability and validity of QOL assessment tools and suggests several new approaches for describing the psychometric properties of these scales. Recommendations for integrating the assessment of appraisal into QOL research and clinical practice are discussed. PMID:15038830

Climate change vulnerability for species-Assessing the assessments.

PubMed

Wheatley, Christopher J; Beale, Colin M; Bradbury, Richard B; Pearce-Higgins, James W; Critchlow, Rob; Thomas, Chris D

2017-09-01

Climate change vulnerability assessments are commonly used to identify species at risk from global climate change, but the wide range of methodologies available makes it difficult for end users, such as conservation practitioners or policymakers, to decide which method to use as a basis for decision-making. In this study, we evaluate whether different assessments consistently assign species to the same risk categories and whether any of the existing methodologies perform well at identifying climate-threatened species. We compare the outputs of 12 climate change vulnerability assessment methodologies, using both real and simulated species, and validate the methods using historic data for British birds and butterflies (i.e. using historical data to assign risks and more recent data for validation). Our results show that the different vulnerability assessment methods are not consistent with one another; different risk categories are assigned for both the real and simulated sets of species. Validation of the different vulnerability assessments suggests that methods incorporating historic trend data into the assessment perform best at predicting distribution trends in subsequent time periods. This study demonstrates that climate change vulnerability assessments should not be used interchangeably due to the poor overall agreement between methods when considering the same species. The results of our validation provide more support for the use of trend-based rather than purely trait-based approaches, although further validation will be required as data become available. © 2017 The Authors. Global Change Biology Published by John Wiley & Sons Ltd.

Competency assessment of microbiology medical laboratory technologists in Ontario, Canada.

PubMed

Desjardins, Marc; Fleming, Christine Ann

2014-08-01

Accreditation in Ontario, Canada, requires that licensed clinical laboratories participate in external quality assessment (also known as proficiency testing) and perform competency evaluation of their staff. To assess the extent of ongoing competency assessment practices, the Quality Management Program--Laboratory Services (QMP-LS) Microbiology Committee surveyed all 112 licensed Ontario microbiology laboratories. The questionnaire consisted of a total of 21 questions that included yes/no, multiple-choice, and short-answer formats. Participants were asked to provide information about existing programs, the frequency of testing, what areas are evaluated, and how results are communicated to the staff. Of the 111 responding laboratories, 6 indicated they did not have a formal evaluation program since they perform only limited bacteriology testing. Of the remaining 105 respondents, 87% perform evaluations at least annually or every 2 years, and 61% include any test or task performed, whereas 16% and 10% focus only on problem areas and high-volume complex tasks, respectively. The most common methods of evaluation were review of external quality assessment (EQA) challenges, direct observation, and worksheet review. With the exception of one participant, all communicate results to staff, and most take remedial action to correct the deficiencies. Although most accredited laboratories have a program to assess the ongoing competency of their staff, the methods used are not standardized or consistently applied, indicating that there is room for improvement. The survey successfully highlighted potential areas for improvement and allowed the QMP-LS Microbiology Committee to provide guidance to Ontario laboratories for establishing or improving existing microbiology-specific competency assessment programs. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

Competency Assessment of Microbiology Medical Laboratory Technologists in Ontario, Canada

PubMed Central

Fleming, Christine Ann

2014-01-01

Accreditation in Ontario, Canada, requires that licensed clinical laboratories participate in external quality assessment (also known as proficiency testing) and perform competency evaluation of their staff. To assess the extent of ongoing competency assessment practices, the Quality Management Program—Laboratory Services (QMP-LS) Microbiology Committee surveyed all 112 licensed Ontario microbiology laboratories. The questionnaire consisted of a total of 21 questions that included yes/no, multiple-choice, and short-answer formats. Participants were asked to provide information about existing programs, the frequency of testing, what areas are evaluated, and how results are communicated to the staff. Of the 111 responding laboratories, 6 indicated they did not have a formal evaluation program since they perform only limited bacteriology testing. Of the remaining 105 respondents, 87% perform evaluations at least annually or every 2 years, and 61% include any test or task performed, whereas 16% and 10% focus only on problem areas and high-volume complex tasks, respectively. The most common methods of evaluation were review of external quality assessment (EQA) challenges, direct observation, and worksheet review. With the exception of one participant, all communicate results to staff, and most take remedial action to correct the deficiencies. Although most accredited laboratories have a program to assess the ongoing competency of their staff, the methods used are not standardized or consistently applied, indicating that there is room for improvement. The survey successfully highlighted potential areas for improvement and allowed the QMP-LS Microbiology Committee to provide guidance to Ontario laboratories for establishing or improving existing microbiology-specific competency assessment programs. PMID:24899030

A SCIENTIFIC AND TECHNOLOGICAL FRAMEWORK FOR EVALUATING COMPARATIVE RISK IN ECOLOGICAL RISK ASSESSMENTS

EPA Science Inventory

There are significant scientific and technological challenges to managing natural resources. Data needs are cited as an obvious limitation, but there exist more fundamental scientific issues. What is still needed is a method of comparing management strategies based on projected i...

The Rapid Benefit Indicators (RBI) Approach: A Process for Assessing the Social Benefits of Ecological Restoration

EPA Science Inventory

Environmental managers face difficult decisions about allocating resources to the most beneficial projects. Focusing solely on ecological outcomes can lead to missed opportunities to provide social benefits, yet few methods exist to easily compare the social benefits of ecologica...

Mental Illness in Persons with Mental Retardation: ARC Facts.

ERIC Educational Resources Information Center

Weber, Linda R.; Wimmer, Sharon

This brief factsheet presents information on mental illness in mentally retarded persons. The most prevalent disorders found in this population are schizophrenia, organic brain syndrome, adjustment disorders, personality disorders, depression, and behavioral problems. Few standardized methods of assessment exist for the diagnosis of mental illness…

In Vitro Toxicity Assessment Technique for Volatile Substances Using Flow-Through System

EPA Science Inventory

: The U.S. EPA is responsible for evaluating the effects of approximately 80,000 chemicals registered for use. The challenge is that limited toxicity data exists for many of these chemicals; traditional toxicity testing methods are slow, costly, involve animal studies, and canno...

Differential electrophoretic separation of cells and its effect on cell viability

NASA Technical Reports Server (NTRS)

Leise, E. M.; Lesane, F.

1974-01-01

An electrophoretic separation method was applied to the separation of cells. To determine the efficiency of the separation, it was necessary to apply existing methodology and develop new methods to assess the characteristics and functions of the separated subpopulations. Through appropriate application of the widely used isoelectric focusing procedure, a reproducible separation method was developed. Cells accumulated at defined pH and 70-80% remained viable. The cells were suitable for further biologic, biochemical and immunologic studies.

Estimation of aboveground forest carbon flux in Oregon: adding components of change to stock-difference assessments

Treesearch

Andrew N. Gray; Thomas R. Whittier; David L. Azuma

2014-01-01

A substantial portion of the carbon (C) emitted by human activity is apparently being stored in forest ecosystems in the Northern Hemisphere, but the magnitude and cause are not precisely understood. Current official estimates of forest C flux are based on a combination of field measurements and other methods. The goal of this study was to improve on existing methods...

Planning changes to health library services on the basis of impact assessment.

PubMed

Urquhart, Christine; Thomas, Rhian; Ovens, Jason; Lucking, Wendy; Villa, Jane

2010-12-01

Various methods of impact assessment for health library services exist, including a toolkit developed for the UK. The Knowledge, Resource and Information service (KRIS) for health promotion, health service commissioning and public health (Bristol area, UK) commissioned an independent team at Aberystwyth University to provide an impact assessment and evaluation of their services and to provide evidence for future planning. The review aimed to provide an action plan for KRIS through assessing the impact of the current service, extent of satisfaction with existing services and views on desirable improvements. Existing impact toolkit guidance was used, with an adapted impact questionnaire, which was distributed by the KRIS staff to 244 users (response rate 62.3%) in early 2009. The independent team analysed the questionnaire data and presented the findings. Users valued the service (93% considered that relevant information was obtained). The most frequent impacts on work were advice to patients, clients or carers, and advice to colleagues. Literature searching and current awareness services saved staff time. Many users were seeking health promotion materials. The adapted questionnaire worked well in demonstrating the service impacts achieved by KRIS, as well as indicating desirable improvements in service delivery. © 2010 The authors. Health Information and Libraries Journal © 2010 Health Libraries Group.

Current limitations and recommendations to improve testing ...

EPA Pesticide Factsheets

In this paper existing regulatory frameworks and test systems for assessing potential endocrine-active chemicals are described, and associated challenges discussed, along with proposed approaches to address these challenges. Regulatory frameworks vary somewhat across organizations, but all basically evaluate whether a chemical possesses endocrine activity and whether this activity can result in adverse outcomes either to humans or the environment. Current test systems include in silico, in vitro and in vivo techniques focused on detecting potential endocrine activity, and in vivo tests that collect apical data to detect possible adverse effects. These test systems are currently designed to robustly assess endocrine activity and/or adverse effects in the estrogen, androgen, and thyroid hormonal pathways; however, there are some limitations of current test systems for evaluating endocrine hazard and risk. These limitations include a lack of certainty regarding: 1)adequately sensitive species and life-stages, 2) mechanistic endpoints that are diagnostic for endocrine pathways of concern, and 3) the linkage between mechanistic responses and apical, adverse outcomes. Furthermore, some existing test methods are resource intensive in regard to time, cost, and use of animals. However, based on recent experiences, there are opportunities to improve approaches to, and guidance for existing test methods, and to reduce uncertainty. For example, in vitro high throughput

Broad-scale assessments of ecological landscapes: developing methods and applications

USGS Publications Warehouse

Carr, Natasha B.; Wood, David J. A.; Bowen, Zachary H.; Haby, Travis S.

2015-01-01

A major component of the BLM Landscape Approach is the Rapid Ecoregional Assessment (REA) program. REAs identify important ecosystems and wildlife habitats at broad spatial scales and determine where these resources are at risk from environmental stressors that can affect the integrity of ecological systems. Building on the lessons learned from completed or current REAs, the BLM, in partnership with the U.S. Geological Survey, will perform systematic comparisons of REA methods to identify the most promising suite of landscape-level analysis tools. In addition, the BLM and USGS will develop practical applications that demonstrate how to incorporate assessment information to address existing management issues, such as cumulative effects of proposed management actions. The outcome of these efforts will be a set of comprehensive technical guidance documents for conducting and applying broad-scale assessments.

A comparison of students' achievement and attitude as a function of lecture/lab sequencing in a non-science majors introductory biology course

NASA Astrophysics Data System (ADS)

Hurst March, Robin Denise

This investigation compared student achievement and attitudes toward science from three different sequencing approaches used in teaching biology to nonscience students. The three sequencing approaches were the lecture course only, lecture/laboratory courses taken together, and laboratory with previously taken lecture approach. The purposes of this study were to determine if (1) a relationship exists between the Attitude Towards Science in School Assessment (ATSSA) scores (Germann, 1988) and biology achievement, (2) a difference exists among the ATSSA scores and sequencing, (3) a difference exists among the biology achievement scores and sequencing, and (4) the ATSSA is a reliable instrument of science attitude assessment for the undergraduate students in an introductory biology nonmajors laboratory and lecture courses at a research I institution during the fall semester 1996. Fifty-four students comprised the lecture only group, 90 students comprised the lecture and laboratory taken together approach, and 23 students comprised the laboratory only approach. Research questions addressed were (1) What are the differences in student biology achievement as a function of the three different methods of instruction? (2) What are the differences in student attitude towards science as a function of the three different methods of instruction? (3) What is the relationship between post-attitude (ATSSA) and biology achievement for each of the three methods of instruction? An analysis of variance utilized the mean posttest scores on the ATSSA and mean achievement scores as the dependent variables. The independent variables were the three different sequences of enrollment in introductory biology. At the.05 level of significance, it was found that no significant difference existed between the ATTS and laboratory/lecture sequence. At the.05 level of significance, it was found that no significant difference existed between achievement and laboratory/lecture sequence. A Pearson product moment correlation was used to see if a relationship existed between posttest ATSSA scores and achievement totals in each sequence. A significant relationship was noted between the ATSSA and achievement in each sequence that involved a laboratory component.

Methods to Assess Adverse Childhood Experiences of Children and Families: Toward Approaches to Promote Child Well-being in Policy and Practice.

PubMed

Bethell, Christina D; Carle, Adam; Hudziak, James; Gombojav, Narangerel; Powers, Kathleen; Wade, Roy; Braveman, Paula

Advances in human development sciences point to tremendous possibilities to promote healthy child development and well-being across life by proactively supporting safe, stable and nurturing family relationships (SSNRs), teaching resilience, and intervening early to promote healing the trauma and stress associated with disruptions in SSNRs. Assessing potential disruptions in SSNRs, such as adverse childhood experiences (ACEs), can contribute to assessing risk for trauma and chronic and toxic stress. Asking about ACEs can help with efforts to prevent and attenuate negative impacts on child development and both child and family well-being. Many methods to assess ACEs exist but have not been compared. The National Survey of Children's Health (NSCH) now measures ACEs for children, but requires further assessment and validation. We identified and compared methods to assess ACEs among children and families, evaluated the acceptability and validity of the new NSCH-ACEs measure, and identified implications for assessing ACEs in research and practice. Of 14 ACEs assessment methods identified, 5 have been used in clinical settings (vs public health assessment or research) and all but 1 require self or parent report (3 allow child report). Across methods, 6 to 20 constructs are assessed, 4 of which are common to all: parental incarceration, domestic violence, household mental illness/suicide, household alcohol or substance abuse. Common additional content includes assessing exposure to neighborhood violence, bullying, discrimination, or parental death. All methods use a numeric, cumulative risk scoring methodology. The NSCH-ACEs measure was acceptable to respondents as evidenced by few missing values and no reduction in response rate attributable to asking about children's ACEs. The 9 ACEs assessed in the NSCH co-occur, with most children with 1 ACE having additional ACEs. This measure showed efficiency and confirmatory factor analysis as well as latent class analysis supported a cumulative risk scoring method. Formative as well as reflective measurement models further support cumulative risk scoring and provide evidence of predictive validity of the NSCH-ACEs. Common effects of ACEs across household income groups confirm information distinct from economic status is provided and suggest use of population-wide versus high-risk approaches to assessing ACEs. Although important variations exist, available ACEs measurement methods are similar and show consistent associations with poorer health outcomes in absence of protective factors and resilience. All methods reviewed appear to coincide with broader goals to facilitate health education, promote health and, where needed, to mitigate the trauma, chronic stress, and behavioral and emotional sequelae that can arise with exposure to ACEs. Assessing ACEs appears acceptable to individuals and families when conducted in population-based and clinical research contexts. Although research to date and neurobiological findings compel early identification and health education about ACEs in clinical settings, further research to guide use in pediatric practice is required, especially as it relates to distinguishing ACEs assessment from identifying current family psychosocial risks and child abuse. The reflective as well as formative psychometric analyses conducted in this study confirm use of cumulative risk scoring for the NSCH-ACEs measure. Even if children have not been exposed to ACEs, assessing ACEs has value as an educational tool for engaging and educating families and children about the importance of SSNRs and how to recognize and manage stress and learn resilience. Copyright © 2017 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Use of the method of biosphere compatibility for the assessment of environmental protection methods

NASA Astrophysics Data System (ADS)

Vorobyov, Sergey

2018-01-01

The article is devoted to the question of using the indicator of biosphere compatibility for assessing the effectiveness of environmental protection methods. The indicator of biosphere compatibility was proposed by the vice-president of RAASN (Russian Academy of Architecture and Building Sciences), Doctor of Technical Sciences, Professor V.I. Ilyichev. This indicator is allows not only qualitatively but also quantitatively to assess the degree of development of urban urban areas, from the standpoint of preserving the biosphere in urban ecosystems while realizing the city’s main functions. The integral indicator of biosphere compatibility is allows us to assess not only the current ecological situation in the territory under consideration, but also to plan the forecast of its changes for building the new construction projects, or for reconstructing existing ones. The indicator of biosphere compatibility, which is a mathematical expression of the tripartite balance (technosphere, biosphere and population of this area), is allows us to quantify the degree of effectiveness of different method of protecting the environment for choose the most effective for these conditions.

A comprehensive framework for data quality assessment in CER.

PubMed

Holve, Erin; Kahn, Michael; Nahm, Meredith; Ryan, Patrick; Weiskopf, Nicole

2013-01-01

The panel addresses the urgent need to ensure that comparative effectiveness research (CER) findings derived from diverse and distributed data sources are based on credible, high-quality data; and that the methods used to assess and report data quality are consistent, comprehensive, and available to data consumers. The panel consists of representatives from four teams leveraging electronic clinical data for CER, patient centered outcomes research (PCOR), and quality improvement (QI) and seeks to change the current paradigm where data quality assessment (DQA) is performed "behind the scenes" using one-off project specific methods. The panelists will present their process of harmonizing existing models for describing and measuring clinical data quality and will describe a comprehensive integrated framework for assessing and reporting DQA findings. The collaborative project is supported by the Electronic Data Methods (EDM) Forum, a three-year grant from the Agency for Healthcare Research and Quality (AHRQ) to facilitate learning and foster collaboration across a set of CER, PCOR, and QI projects designed to build infrastructure and methods for collecting and analyzing prospective data from electronic clinical data .

Quantification of ETS exposure in hospitality workers who have never smoked

PubMed Central

2010-01-01

Background Environmental Tobacco Smoke (ETS) was classified as human carcinogen (K1) by the German Research Council in 1998. According to epidemiological studies, the relative risk especially for lung cancer might be twice as high in persons who have never smoked but who are in the highest exposure category, for example hospitality workers. In order to implement these results in the German regulations on occupational illnesses, a valid method is needed to retrospectively assess the cumulative ETS exposure in the hospitality environment. Methods A literature-based review was carried out to locate a method that can be used for the German hospitality sector. Studies assessing ETS exposure using biological markers (for example urinary cotinine, DNA adducts) or questionnaires were excluded. Biological markers are not considered relevant as they assess exposure only over the last hours, weeks or months. Self-reported exposure based on questionnaires also does not seem adequate for medico-legal purposes. Therefore, retrospective exposure assessment should be based on mathematical models to approximate past exposure. Results For this purpose a validated model developed by Repace and Lowrey was considered appropriate. It offers the possibility of retrospectively assessing exposure with existing parameters (such as environmental dimensions, average number of smokers, ventilation characteristics and duration of exposure). The relative risk of lung cancer can then be estimated based on the individual cumulative exposure of the worker. Conclusion In conclusion, having adapted it to the German hospitality sector, an existing mathematical model appears to be capable of approximating the cumulative exposure. However, the level of uncertainty of these approximations has to be taken into account, especially for diseases with a long latency period such as lung cancer. PMID:20704719

Application of Biosphere Compatibility Indicator for Assessment of the Effectiveness of Environmental Protection Methods

NASA Astrophysics Data System (ADS)

Bakaeva, N. V.; Vorobyov, S. A.; Chernyaeva, I. V.

2017-11-01

The article is devoted to the issue of using the biosphere compatibility indicator to assess the effectiveness of environmental protection methods. The indicator biosphere compatibility was proposed by the vice-president of RAASN (Russian Academy of Architecture and Building Sciences), Doctor of Technical Sciences, Professor V.I. Ilyichev. This indicator allows one to assess not only qualitatively but also quantitatively the degree of urban areas development from the standpoint of preserving the biosphere in urban ecosystems while performing the city’s main functions. The integral biosphere compatibility indicator allows us to assess not only the current ecological situation in the territory under consideration but also to plan the forecast of its changes for the new construction projects implementation or for the reconstruction of the existing ones. The biosphere compatibility indicator, which is a mathematical expression of the tripartite balance (technosphere, biosphere and population of this area), allows us to quantify the effectiveness degree of different methods for environment protection to choose the most effective one under these conditions.

Probabilistic Exposure Analysis for Chemical Risk Characterization

PubMed Central

Bogen, Kenneth T.; Cullen, Alison C.; Frey, H. Christopher; Price, Paul S.

2009-01-01

This paper summarizes the state of the science of probabilistic exposure assessment (PEA) as applied to chemical risk characterization. Current probabilistic risk analysis methods applied to PEA are reviewed. PEA within the context of risk-based decision making is discussed, including probabilistic treatment of related uncertainty, interindividual heterogeneity, and other sources of variability. Key examples of recent experience gained in assessing human exposures to chemicals in the environment, and other applications to chemical risk characterization and assessment, are presented. It is concluded that, although improvements continue to be made, existing methods suffice for effective application of PEA to support quantitative analyses of the risk of chemically induced toxicity that play an increasing role in key decision-making objectives involving health protection, triage, civil justice, and criminal justice. Different types of information required to apply PEA to these different decision contexts are identified, and specific PEA methods are highlighted that are best suited to exposure assessment in these separate contexts. PMID:19223660

Looking for trees in the forest: summary tree from posterior samples

PubMed Central

2013-01-01

Background Bayesian phylogenetic analysis generates a set of trees which are often condensed into a single tree representing the whole set. Many methods exist for selecting a representative topology for a set of unrooted trees, few exist for assigning branch lengths to a fixed topology, and even fewer for simultaneously setting the topology and branch lengths. However, there is very little research into locating a good representative for a set of rooted time trees like the ones obtained from a BEAST analysis. Results We empirically compare new and known methods for generating a summary tree. Some new methods are motivated by mathematical constructions such as tree metrics, while the rest employ tree concepts which work well in practice. These use more of the posterior than existing methods, which discard information not directly mapped to the chosen topology. Using results from a large number of simulations we assess the quality of a summary tree, measuring (a) how well it explains the sequence data under the model and (b) how close it is to the “truth”, i.e to the tree used to generate the sequences. Conclusions Our simulations indicate that no single method is “best”. Methods producing good divergence time estimates have poor branch lengths and lower model fit, and vice versa. Using the results presented here, a user can choose the appropriate method based on the purpose of the summary tree. PMID:24093883

Looking for trees in the forest: summary tree from posterior samples.

PubMed

Heled, Joseph; Bouckaert, Remco R

2013-10-04

Bayesian phylogenetic analysis generates a set of trees which are often condensed into a single tree representing the whole set. Many methods exist for selecting a representative topology for a set of unrooted trees, few exist for assigning branch lengths to a fixed topology, and even fewer for simultaneously setting the topology and branch lengths. However, there is very little research into locating a good representative for a set of rooted time trees like the ones obtained from a BEAST analysis. We empirically compare new and known methods for generating a summary tree. Some new methods are motivated by mathematical constructions such as tree metrics, while the rest employ tree concepts which work well in practice. These use more of the posterior than existing methods, which discard information not directly mapped to the chosen topology. Using results from a large number of simulations we assess the quality of a summary tree, measuring (a) how well it explains the sequence data under the model and (b) how close it is to the "truth", i.e to the tree used to generate the sequences. Our simulations indicate that no single method is "best". Methods producing good divergence time estimates have poor branch lengths and lower model fit, and vice versa. Using the results presented here, a user can choose the appropriate method based on the purpose of the summary tree.

Investigating the technical adequacy of curriculum-based measurement in written expression for students who are deaf or hard of hearing.

PubMed

Cheng, Shu-Fen; Rose, Susan

2009-01-01

This study investigated the technical adequacy of curriculum-based measures of written expression (CBM-W) in terms of writing prompts and scoring methods for deaf and hard-of-hearing students. Twenty-two students at the secondary school-level completed 3-min essays within two weeks, which were scored for nine existing and alternative curriculum-based measurement (CBM) scoring methods. The technical features of the nine scoring methods were examined for interrater reliability, alternate-form reliability, and criterion-related validity. The existing CBM scoring method--number of correct minus incorrect word sequences--yielded the highest reliability and validity coefficients. The findings from this study support the use of the CBM-W as a reliable and valid tool for assessing general writing proficiency with secondary students who are deaf or hard of hearing. The CBM alternative scoring methods that may serve as additional indicators of written expression include correct subject-verb agreements, correct clauses, and correct morphemes.

Growing the field of health impact assessment in the United States: an agenda for research and practice.

PubMed

Dannenberg, Andrew L; Bhatia, Rajiv; Cole, Brian L; Dora, Carlos; Fielding, Jonathan E; Kraft, Katherine; McClymont-Peace, Diane; Mindell, Jennifer; Onyekere, Chinwe; Roberts, James A; Ross, Catherine L; Rutt, Candace D; Scott-Samuel, Alex; Tilson, Hugh H

2006-02-01

Health impact assessment (HIA) methods are used to evaluate the impact on health of policies and projects in community design, transportation planning, and other areas outside traditional public health concerns. At an October 2004 workshop, domestic and international experts explored issues associated with advancing the use of HIA methods by local health departments, planning commissions, and other decisionmakers in the United States. Workshop participants recommended conducting pilot tests of existing HIA tools, developing a database of health impacts of common projects and policies, developing resources for HIA use, building workforce capacity to conduct HIAs, and evaluating HIAs. HIA methods can influence decisionmakers to adjust policies and projects to maximize benefits and minimize harm to the public's health.

Making the transition to workload-based staffing: using the Workload Indicators of Staffing Need method in Uganda.

PubMed

Namaganda, Grace; Oketcho, Vincent; Maniple, Everd; Viadro, Claire

2015-08-31

Uganda's health workforce is characterized by shortages and inequitable distribution of qualified health workers. To ascertain staffing levels, Uganda uses fixed government-approved norms determined by facility type. This approach cannot distinguish between facilities of the same type that have different staffing needs. The Workload Indicators of Staffing Need (WISN) method uses workload to determine number and type of staff required in a given facility. The national WISN assessment sought to demonstrate the limitations of the existing norms and generate evidence to influence health unit staffing and staff deployment for efficient utilization of available scarce human resources. A national WISN assessment (September 2012) used purposive sampling to select 136 public health facilities in 33/112 districts. The study examined staffing requirements for five cadres (nursing assistants, nurses, midwives, clinical officers, doctors) at health centres II (n = 59), III (n = 53) and IV (n = 13) and hospitals (n = 11). Using health management information system workload data (1 July 2010-30 June 2011), the study compared current and required staff, assessed workload pressure and evaluated the adequacy of the existing staffing norms. By the WISN method, all three types of health centres had fewer nurses (42-70%) and midwives (53-67%) than required and consequently exhibited high workload pressure (30-58%) for those cadres. Health centres IV and hospitals lacked doctors (39-42%) but were adequately staffed with clinical officers. All facilities displayed overstaffing of nursing assistants. For all cadres at health centres III and IV other than nursing assistants, the fixed norms or existing staffing or both fell short of the WISN staffing requirements, with, for example, only half as many nurses and midwives as required. The WISN results demonstrate the inadequacies of existing staffing norms, particularly for health centres III and IV. The results provide an evidence base to reshape policy, adopt workload-based norms, review scopes of practice and target human resource investments. In the near term, the government could redistribute existing health workers to improve staffing equity in line with the WISN results. Longer term revision of staffing norms and investments to effectively reflect actual workloads and ensure provision of quality services at all levels is needed.

Rapid systematic assessment of the detection and attribution of regional anthropogenic climate change

NASA Astrophysics Data System (ADS)

Stone, Dáithí A.; Hansen, Gerrit

2016-09-01

Despite being a well-established research field, the detection and attribution of observed climate change to anthropogenic forcing is not yet provided as a climate service. One reason for this is the lack of a methodology for performing tailored detection and attribution assessments on a rapid time scale. Here we develop such an approach, based on the translation of quantitative analysis into the "confidence" language employed in recent Assessment Reports of the Intergovernmental Panel on Climate Change. While its systematic nature necessarily ignores some nuances examined in detailed expert assessments, the approach nevertheless goes beyond most detection and attribution studies in considering contributors to building confidence such as errors in observational data products arising from sparse monitoring networks. When compared against recent expert assessments, the results of this approach closely match those of the existing assessments. Where there are small discrepancies, these variously reflect ambiguities in the details of what is being assessed, reveal nuances or limitations of the expert assessments, or indicate limitations of the accuracy of the sort of systematic approach employed here. Deployment of the method on 116 regional assessments of recent temperature and precipitation changes indicates that existing rules of thumb concerning the detectability of climate change ignore the full range of sources of uncertainty, most particularly the importance of adequate observational monitoring.

A framework for assessing water and proppant use and flowback water extraction associated with development of continuous petroleum resources

USGS Publications Warehouse

Haines, Seth S.; Cook, Troy; Thamke, Joanna N.; Davis, Kyle W.; Long, Andrew J.; Healy, Richard W.; Hawkins, Sarah J.; Engle, Mark A.

2014-01-01

The U.S. Geological Survey is developing approaches for the quantitative assessment of water and proppant involved with possible future production of continuous petroleum deposits. The assessment approach is an extension of existing U.S. Geological Survey petroleum-assessment methods, and it aims to provide objective information that helps decision makers understand the tradeoffs inherent in resource-development decisions. This fact sheet provides an overview of U.S. Geological Survey assessments for quantities of water and proppant required for drilling and hydraulic fracturing and for flowback water extracted with petroleum; the report also presents the form of the intended assessment output information.

Performance assessment of static lead-lag feedforward controllers for disturbance rejection in PID control loops.

PubMed

Yu, Zhenpeng; Wang, Jiandong

2016-09-01

This paper assesses the performance of feedforward controllers for disturbance rejection in univariate feedback plus feedforward control loops. The structures of feedback and feedforward controllers are confined to proportional-integral-derivative and static-lead-lag forms, respectively, and the effects of feedback controllers are not considered. The integral squared error (ISE) and total squared variation (TSV) are used as performance metrics. A performance index is formulated by comparing the current ISE and TSV metrics to their own lower bounds as performance benchmarks. A controller performance assessment (CPA) method is proposed to calculate the performance index from measurements. The proposed CPA method resolves two critical limitations in the existing CPA methods, in order to be consistent with industrial scenarios. Numerical and experimental examples illustrate the effectiveness of the obtained results. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Comparative Study on Code-based Linear Evaluation of an Existing RC Building Damaged during 1998 Adana-Ceyhan Earthquake

NASA Astrophysics Data System (ADS)

Toprak, A. Emre; Gülay, F. Gülten; Ruge, Peter

2008-07-01

Determination of seismic performance of existing buildings has become one of the key concepts in structural analysis topics after recent earthquakes (i.e. Izmit and Duzce Earthquakes in 1999, Kobe Earthquake in 1995 and Northridge Earthquake in 1994). Considering the need for precise assessment tools to determine seismic performance level, most of earthquake hazardous countries try to include performance based assessment in their seismic codes. Recently, Turkish Earthquake Code 2007 (TEC'07), which was put into effect in March 2007, also introduced linear and non-linear assessment procedures to be applied prior to building retrofitting. In this paper, a comparative study is performed on the code-based seismic assessment of RC buildings with linear static methods of analysis, selecting an existing RC building. The basic principles dealing the procedure of seismic performance evaluations for existing RC buildings according to Eurocode 8 and TEC'07 will be outlined and compared. Then the procedure is applied to a real case study building is selected which is exposed to 1998 Adana-Ceyhan Earthquake in Turkey, the seismic action of Ms = 6.3 with a maximum ground acceleration of 0.28 g It is a six-storey RC residential building with a total of 14.65 m height, composed of orthogonal frames, symmetrical in y direction and it does not have any significant structural irregularities. The rectangular shaped planar dimensions are 16.40 m×7.80 m = 127.90 m2 with five spans in x and two spans in y directions. It was reported that the building had been moderately damaged during the 1998 earthquake and retrofitting process was suggested by the authorities with adding shear-walls to the system. The computations show that the performing methods of analysis with linear approaches using either Eurocode 8 or TEC'07 independently produce similar performance levels of collapse for the critical storey of the structure. The computed base shear value according to Eurocode is much higher than the requirements of the Turkish Earthquake Code while the selected ground conditions represent the same characteristics. The main reason is that the ordinate of the horizontal elastic response spectrum for Eurocode 8 is increased by the soil factor. In TEC'07 force-based linear assessment, the seismic demands at cross-sections are to be checked with residual moment capacities; however, the chord rotations of primary ductile elements must be checked for Eurocode safety verifications. On the other hand, the demand curvatures from linear methods of analysis of Eurocode 8 together with TEC'07 are almost similar.

[How can the impact of Health Technology Assessment (HTA) in the Austrian healthcare system be assessed? Design of a conceptual framework].

PubMed

Schumacher, I; Zechmeister, I

2012-04-01

In Austria research in Health Technology Assessment (HTA) has been conducted since the 1990s. Research in HTA aims at supporting an adequate and efficient use of health care resources in order to sustain a publicly financed and solidary health care system. Ultimately, HTA research should result in better health of the population. Research results should provide independent information for decision makers. For legitimizing further research resources and for prioritizing future HTA research and guaranteeing the value of future research, HTA research needs itself to undergo evaluation. Aim of the study is to design a conceptual framework for evaluating the impact of HTA research in Austria on the basis of the existing literature. An already existing review which presents methods and concepts how to evaluate HTA-impact was updated by a systematic research including literature of the years 2004-January 2010. Results were analysed in regard to 4 categories: definition of the term impact, target groups and system levels, operationalisation of indicators and evaluation methods. Overall, 19 publications were included. Referring to the 4 categories, an explanation of impact has to take into account HTAs multidisciplinary setting and needs a context related definition. Target groups, system levels, indicators and methods depend on the impact defined. Studies investigated direct and indirect impact and were focused on different target groups like physicians, nurses and decision makers on the micro-, and meso level, as well as politicians and reimbursement institutions on the macro level. Except for one reference all studies applied already known and mostly qualitative methods for measuring the impact of HTA research. Thus, an appropriate pool of instruments seems to be available. There is a lack of information about validity of applied methods and indicators. By adapting adequate methods and concepts a conceptual framework for the Austrian HTA-Impact evaluation has been designed. The paper presents an overview of existing methods for the evaluation of the HTA research. This has been used to identify useful approaches for measuring the HTA-impact in Austria. By providing a context sensitive framework for impact evaluation in Austria the Austrian HTA-research contributes to the international trend of impact-evaluation. © Georg Thieme Verlag KG Stuttgart · New York.

Clinical Biophysics; A New Concept in Undergraduate Medical Education.

ERIC Educational Resources Information Center

Anbar, Michael

1981-01-01

The abilities to understand medical technology, to evaluate new devices and procedures, and to assess their effectiveness, reliability, costs, and risks in comparison with existing methods are discussed. A course in clinical biophysics offered at the State University of New York at Buffalo is described. (Author/MLW)

Defining Learning Disability: Does IQ Have Anything Significant to Say?

ERIC Educational Resources Information Center

Dunn, Michael W.

2010-01-01

A debate exists in the research community about replacing the traditional IQ/achievement discrepancy method for learning disability identification with a "response-to-intervention model". This new assessment paradigm uses a student's level of improvement with small-group or individual programming to determine a possible need for…

Courseware Authoring and Delivering System for Chinese Language Instruction. Final Report.

ERIC Educational Resources Information Center

Mao, Tang

A study investigated technical methods for simplifying and improving the creation of software for teaching uncommonly taught languages such as Chinese. Research consisted of assessment of existing authoring systems, domestic and overseas, available hardware, peripherals, and software packages that could be integrated into this project. Then some…

The Impact of Missing Background Data on Subpopulation Estimation

ERIC Educational Resources Information Center

Rutkowski, Leslie

2011-01-01

Although population modeling methods are well established, a paucity of literature appears to exist regarding the effect of missing background data on subpopulation achievement estimates. Using simulated data that follows typical large-scale assessment designs with known parameters and a number of missing conditions, this paper examines the extent…

Emerging Tools to Estimate and to Predict Exposures to Chemicals

EPA Science Inventory

The timely assessment of the human and ecological risk posed by thousands of existing and emerging commercial chemicals is a critical challenge facing EPA in its mission to protect public health and the environment The US EPA has been conducting research to enhance methods used t...

Assessing the Damage Potential in Pretensioned Bridges Caused by Increased Truck Loads Due to Freight Movements (Phase 1)

DOT National Transportation Integrated Search

2010-05-01

When evaluating the condition of existing bridges determining in situ stresses in the members provides valuable information about the condition of the structures. In this study, a method of surface strain relief was investigated whereby the change in...

Student Perceptions of University Physical Activity Instruction Courses Taught Utilizing Sport Education

ERIC Educational Resources Information Center

Mohr, Derek J.; Sibley, Benjamin A.; Townsend, J. Scott

2012-01-01

Limited research exists on effective teaching methods in university physical activity instruction (PAI) program courses. The purpose of this study was to evaluate PAI courses taught utilizing a sport education curriculum and instructional model. The Individual Development and Educational Assessment (IDEA) teaching evaluation was administered to…

Measuring School Psychology Trainee Self-Efficacy

ERIC Educational Resources Information Center

Lockwood, Adam B.; Mcclure, John; Sealander, Karen; Baker, Courtney N.

2017-01-01

There is an ever-increasing need for school psychology training programs to demonstrate their ability to produce competent practitioners. One method of addressing this need is through the assessment of self-efficacy. However, little research on self-efficacy in school psychology exists likely due to the lack of a psychometrically sound measure of…

Field assessment of the effects of roadside vegetation on near-road black carbon and particulate matter

EPA Science Inventory

One proposed method for reducing exposure to mobile-source air pollution is the construction or preservation of vegetation barriers between major roads and nearby populations. This study combined stationary and mobile monitoring approaches to determine the effects of an existing,...

Applications of statistical physics methods in economics: Current state and perspectives

NASA Astrophysics Data System (ADS)

Lux, Thomas

2016-12-01

This note discusses the development of applications of statistical physics to economics since the beginning of the `econophysics' movement about twenty years ago. I attempt to assess which of these applications appear particularly valuable and successful, and where important overlaps exist between research conducted by economist and `econophysicists'.

Assessing the effectiveness of green infrastructure stormwater best management practices in New England at the small watershed scale.

EPA Science Inventory

Methods are needed to evaluate the effectiveness of existing Stormwater Best Management Practices (BMPs) and Low Impact Development and to predict the relative effectiveness of proposed stormwater management plans in maintaining the habitat and biotic integrity of streams in New ...

Application of geosites assessment method in geopark context

NASA Astrophysics Data System (ADS)

Martin, Simon; Perret, Amandine; Renau, Pierre; Cartier-Moulin, Olivier; Regolini-Bissig, Géraldine

2014-05-01

The regional natural park of the Monts d'Ardèche (Ardèche and Haute-Loire departments, France) is candidate to the European Geopark Network (EGN) in 2014. The area has a wide geodiversity - with rocks from Cambrian to Pleistocene (basalt flows) - and interesting features like phonolitic protrusions, maars and granite boulders fields. Around 115 sites were selected and documented through a geosites inventory carried out in the territory. This pre-selection was supervised by the Ardèche Geological Society and is therefore expert advice based. In the context of EGN candidature, these potential geosites were assessed with a simplified method. It follows the spirit of the method from the University of Lausanne (Reynard et al., 2007) and its recent developments: assessment of the scientific (central) value and of a set of additional values (ecological and cultural). As this assessment aimed to offer a management tool to the future geopark's authorities, a special focus was given to management aspects. In particular, the opportunities to use the site for education (from schools to universities) and for tourism as well as the existence of protection and of interpretive facilities were documented and assessed. Several interesting conclusions may be drawn from this case study: (1) expert assessment is effective when it is based on a pre-existing inventory which is well structured and documented; (2) even simplified, an assessment method is a very useful framework to expert assessment as it focuses the discussions on most important points and helps to balance the assessment; (3) whereas the inventory can be extensively detailed and partly academic, the assessment in the geopark context is objective-driven in order to answer management needs. The place of the geosites assessment among the three key players of a geopark construction process (i.e. territory's managers, local geoscientists and EGN) is also discussed. This place can be defined as the point of consensus of needs and wishes of all stakeholders. For instance, the local geoscientists are most interested in conservation and scientific interests whereas managers aim to develop and promote the tourist (and economic) dimension. The definition and application of the assessment method is the outcome of constant discussion with both local key players; it therefore reflects and moderates the - sometimes antagonistic - interests. All the discussions around geosites assessment can be considered as the prime mover at local scale of the geopark construction process. This example shows that geosites assessment can not be considered only as an academic operation, but also as an essential step to initiate a local dynamic and consensus that help to achieve some of the objectives of a geopark defined by EGN like local involvement, sustainable development, or cooperation with local communities.

How Magnetic Disturbance Influences the Attitude and Heading in Magnetic and Inertial Sensor-Based Orientation Estimation.

PubMed

Fan, Bingfei; Li, Qingguo; Liu, Tao

2017-12-28

With the advancements in micro-electromechanical systems (MEMS) technologies, magnetic and inertial sensors are becoming more and more accurate, lightweight, smaller in size as well as low-cost, which in turn boosts their applications in human movement analysis. However, challenges still exist in the field of sensor orientation estimation, where magnetic disturbance represents one of the obstacles limiting their practical application. The objective of this paper is to systematically analyze exactly how magnetic disturbances affects the attitude and heading estimation for a magnetic and inertial sensor. First, we reviewed four major components dealing with magnetic disturbance, namely decoupling attitude estimation from magnetic reading, gyro bias estimation, adaptive strategies of compensating magnetic disturbance and sensor fusion algorithms. We review and analyze the features of existing methods of each component. Second, to understand each component in magnetic disturbance rejection, four representative sensor fusion methods were implemented, including gradient descent algorithms, improved explicit complementary filter, dual-linear Kalman filter and extended Kalman filter. Finally, a new standardized testing procedure has been developed to objectively assess the performance of each method against magnetic disturbance. Based upon the testing results, the strength and weakness of the existing sensor fusion methods were easily examined, and suggestions were presented for selecting a proper sensor fusion algorithm or developing new sensor fusion method.

Assessing culture via the Internet: methods and techniques for psychological research.

PubMed

Barry, D T

2001-02-01

This study examines the acculturation experiences of Arabic immigrants and assesses the utility of the Internet as a data collection tool. Based on in-depth pilot interview data from 10 male Arabic immigrants and items selected from pre-existing measures, the Male Arabic Ethnic Identity Measure (MAEIM) was developed. Male Arab immigrants (115 males) were solicited through traditional methods in addition to the Internet. Satisfactory reliability and validity were reported for the MAEIM. No significant differences emerged between the Internet and Midwestern samples. The Internet proved to be an effective method for soliciting a relatively large, geographically dispersed sample of Arabic immigrants. The use of the Internet as a research tool is examined in the context of anonymity, networking, low-cost, perceived interactive control, methodological rigor, and external validity. The Internet was an effective vehicle for addressing concerns raised by prospective participants. It is suggested that the Internet may be an important method to assess culture-relevant variables in further research on Arab and other immigrant populations.

Limb length inequality: clinical implications for assessment and intervention.

PubMed

Brady, Rebecca J; Dean, John B; Skinner, T Marc; Gross, Michael T

2003-05-01

The purpose of this paper is to review relevant literature concerning limb length inequalities in adults and to make recommendations for assessment and intervention based on the literature and our own clinical experience. Literature searches were conducted in the MEDLINE, PubMed, and CINAHL databases. Limb length inequality and common classification criteria are defined and etiological factors are presented. Common methods of detecting limb length inequality include direct (tape measure methods), indirect (pelvic leveling), and radiological techniques. Interventions include shoe inserts or external shoe lift therapy for mild cases. Surgery may be appropriate in severe cases. Little agreement exists regarding the prevalence of limb length inequality, the degree of limb length inequality that is considered clinically significant, and the reliability and validity of assessment methods. Based on correlational studies, the relationship between limb length inequality and orthopaedic pathologies is questionable. Stronger support for the link between low back pain (LBP) and limb length inequality is provided by intervention studies. Methods involving palpation of pelvic landmarks with block correction have the most support for clinical assessment of limb length inequality. Standing radiographs are suggested when clinical assessment methods are unsatisfactory. Clinicians should exercise caution when undertaking intervention strategies for limb length inequality of less than 5 mm when limb length inequality has been identified with clinical techniques. Recommendations are provided regarding intervention strategies.

Fatigue assessment for selected connections of structural steel bridge components using the finite elements method

NASA Astrophysics Data System (ADS)

Śledziewski, Krzysztof

2018-01-01

Material fatigue it is one of the most frequent causes of steel bridge failures, particularly the bridges already existing. Thus, the procedure of fatigue life assessment is one of the most relevant procedures in a comprehensive assessment of load-carrying capacity and service life of the structure. A reliable assessment of the fatigue life is predominantly decisive for estimation of the remaining service life. Hitherto, calculation methods of welded joints took into account only stresses occurring in cross sections of whole elements and did not take into account stress concentration occurring in the vicinity of the weld, caused by geometrical aspects of the detail. At present, use of the Finite Element Analysis, makes possible looking for more accurate approach to the fatigue design of steel structures. The method of geometrical stresses is just such approach which is based on definition of stresses which take into account geometry of the detail. The study presents fatigue assessment of a representative type of welded joint in welded bridge structures. The testing covered longitudinal attachments. The main analyses were carried out on the basis of FEM and the method of local stresses, so-called "hot-spot" stresses. The obtained values of stresses were compared with the values obtained in accordance with the method of nominal stress.

Systematic evaluation of non-animal test methods for skin sensitisation safety assessment.

PubMed

Reisinger, Kerstin; Hoffmann, Sebastian; Alépée, Nathalie; Ashikaga, Takao; Barroso, Joao; Elcombe, Cliff; Gellatly, Nicola; Galbiati, Valentina; Gibbs, Susan; Groux, Hervé; Hibatallah, Jalila; Keller, Donald; Kern, Petra; Klaric, Martina; Kolle, Susanne; Kuehnl, Jochen; Lambrechts, Nathalie; Lindstedt, Malin; Millet, Marion; Martinozzi-Teissier, Silvia; Natsch, Andreas; Petersohn, Dirk; Pike, Ian; Sakaguchi, Hitoshi; Schepky, Andreas; Tailhardat, Magalie; Templier, Marie; van Vliet, Erwin; Maxwell, Gavin

2015-02-01

The need for non-animal data to assess skin sensitisation properties of substances, especially cosmetics ingredients, has spawned the development of many in vitro methods. As it is widely believed that no single method can provide a solution, the Cosmetics Europe Skin Tolerance Task Force has defined a three-phase framework for the development of a non-animal testing strategy for skin sensitization potency prediction. The results of the first phase – systematic evaluation of 16 test methods – are presented here. This evaluation involved generation of data on a common set of ten substances in all methods and systematic collation of information including the level of standardisation, existing test data,potential for throughput, transferability and accessibility in cooperation with the test method developers.A workshop was held with the test method developers to review the outcome of this evaluation and to discuss the results. The evaluation informed the prioritisation of test methods for the next phase of the non-animal testing strategy development framework. Ultimately, the testing strategy – combined with bioavailability and skin metabolism data and exposure consideration – is envisaged to allow establishment of a data integration approach for skin sensitisation safety assessment of cosmetic ingredients.

Fuzzy architecture assessment for critical infrastructure resilience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muller, George

2012-12-01

This paper presents an approach for the selection of alternative architectures in a connected infrastructure system to increase resilience of the overall infrastructure system. The paper begins with a description of resilience and critical infrastructure, then summarizes existing approaches to resilience, and presents a fuzzy-rule based method of selecting among alternative infrastructure architectures. This methodology includes considerations which are most important when deciding on an approach to resilience. The paper concludes with a proposed approach which builds on existing resilience architecting methods by integrating key system aspects using fuzzy memberships and fuzzy rule sets. This novel approach aids the systemsmore » architect in considering resilience for the evaluation of architectures for adoption into the final system architecture.« less

A novel manifold-manifold distance index applied to looseness state assessment of viscoelastic sandwich structures

NASA Astrophysics Data System (ADS)

Sun, Chuang; Zhang, Zhousuo; Guo, Ting; Luo, Xue; Qu, Jinxiu; Zhang, Chenxuan; Cheng, Wei; Li, Bing

2014-06-01

Viscoelastic sandwich structures (VSS) are widely used in mechanical equipment; their state assessment is necessary to detect structural states and to keep equipment running with high reliability. This paper proposes a novel manifold-manifold distance-based assessment (M2DBA) method for assessing the looseness state in VSSs. In the M2DBA method, a manifold-manifold distance is viewed as a health index. To design the index, response signals from the structure are firstly acquired by condition monitoring technology and a Hankel matrix is constructed by using the response signals to describe state patterns of the VSS. Thereafter, a subspace analysis method, that is, principal component analysis (PCA), is performed to extract the condition subspace hidden in the Hankel matrix. From the subspace, pattern changes in dynamic structural properties are characterized. Further, a Grassmann manifold (GM) is formed by organizing a set of subspaces. The manifold is mapped to a reproducing kernel Hilbert space (RKHS), where support vector data description (SVDD) is used to model the manifold as a hypersphere. Finally, a health index is defined as the cosine of the angle between the hypersphere centers corresponding to the structural baseline state and the looseness state. The defined health index contains similarity information existing in the two structural states, so structural looseness states can be effectively identified. Moreover, the health index is derived by analysis of the global properties of subspace sets, which is different from traditional subspace analysis methods. The effectiveness of the health index for state assessment is validated by test data collected from a VSS subjected to different degrees of looseness. The results show that the health index is a very effective metric for detecting the occurrence and extension of structural looseness. Comparison results indicate that the defined index outperforms some existing state-of-the-art ones.

Comparison of maternal morbidity and medical costs during pregnancy and delivery between patients with gestational diabetes and patients with pre-existing diabetes

PubMed Central

Son, K H; Lim, N-K; Lee, J-W; Cho, M-C; Park, H-Y

2015-01-01

Aims To evaluate the effects of gestational diabetes and pre-existing diabetes on maternal morbidity and medical costs, using data from the Korea National Health Insurance Claims Database of the Health Insurance Review and Assessment Service. Methods Delivery cases in 2010, 2011 and 2012 (459 842, 442 225 and 380 431 deliveries) were extracted from the Health Insurance Review and Assessment Service database. The complications and medical costs were compared among the following three pregnancy groups: normal, gestational diabetes and pre-existing diabetes. Results Although, the rates of pre-existing diabetes did not fluctuate (2.5, 2.4 and 2.7%) throughout the study, the rate of gestational diabetes steadily increased (4.6, 6.2 and 8.0%). Furthermore, the rates of pre-existing diabetes and gestational diabetes increased in conjunction with maternal age, pre-existing hypertension and cases of multiple pregnancy. The risk of pregnancy-induced hypertension, urinary tract infections, premature delivery, liver disease and chronic renal disease were greater in the gestational diabetes and pre-existing diabetes groups than in the normal group. The risk of venous thromboembolism, antepartum haemorrhage, shoulder dystocia and placenta disorder were greater in the pre-existing diabetes group, but not the gestational diabetes group, compared with the normal group. The medical costs associated with delivery, the costs during pregnancy and the number of in-hospital days for the subjects in the pre-existing diabetes group were the highest among the three groups. Conclusions The study showed that the rates of pre-existing diabetes and gestational diabetes increased with maternal age at pregnancy and were associated with increases in medical costs and pregnancy-related complications. PMID:25472691

Devices and tasks involved in the objective assessment of standing dynamic balancing - A systematic literature review.

PubMed

Petró, Bálint; Papachatzopoulou, Alexandra; Kiss, Rita M

2017-01-01

Static balancing assessment is often complemented with dynamic balancing tasks. Numerous dynamic balancing assessment methods have been developed in recent decades with their corresponding balancing devices and tasks. The aim of this systematic literature review is to identify and categorize existing objective methods of standing dynamic balancing ability assessment with an emphasis on the balancing devices and tasks being used. Three major scientific literature databases (Science Direct, Web of Science, PLoS ONE) and additional sources were used. Studies had to use a dynamic balancing device and a task described in detail. Evaluation had to be based on objectively measureable parameters. Functional tests without instrumentation evaluated exclusively by a clinician were excluded. A total of 63 articles were included. The data extracted during full-text assessment were: author and date; the balancing device with the balancing task and the measured parameters; the health conditions, size, age and sex of participant groups; and follow-up measurements. A variety of dynamic balancing assessment devices were identified and categorized as 1) Solid ground, 2) Balance board, 3) Rotating platform, 4) Horizontal translational platform, 5) Treadmill, 6) Computerized Dynamic Posturography, and 7) Other devices. The group discrimination ability of the methods was explored and the conclusions of the studies were briefly summarized. Due to the wide scope of this search, it provides an overview of balancing devices and do not represent the state-of-the-art of any single method. The identified dynamic balancing assessment methods are offered as a catalogue of candidate methods to complement static assessments used in studies involving postural control.

Finding the Perfect Doctor: Identifying Lesbian, Gay, Bisexual, and Transgender–Competent Physicians

PubMed Central

Khalili, Joshua; Leung, Lucinda B.

2015-01-01

Objectives. We assessed the existence of procedures and policies for identifying lesbian, gay, bisexual, and transgender (LGBT)–competent physicians at US academic faculty practices, and sought to identify physician training programs that enhance LGBT competency. Methods. We invited all 138 Liaison Committee on Medical Education–accredited US academic faculty practices to participate in a survey in 2012. We systematically assessed their procedures and policies to identify LGBT-competent physicians and their LGBT-competency training. We also assessed geographic region, funding source, and an LGBT health center in the same state. We performed univariate, bivariate, and multivariate logistic regression analyses. Results. The response rate was 50%. Few participants had existing procedures (9%) or policies (4%) to identify LGBT-competent physicians. Procedures included online directories with self-identified LGBT-competent physicians available to the public. Sixteen percent of participants reported having comprehensive LGBT-competency training, and 52% reported having no training. Of note, 80% of participants indicated interest to do more to address these issues. Conclusions. There exist both need and interest for US academic faculty practices to develop procedures, policies, and programs that improve access to LGBT-competent physicians and to train physicians to become LGBT-competent. PMID:25880937

Gait Analysis Methods for Rodent Models of Osteoarthritis

PubMed Central

Jacobs, Brittany Y.; Kloefkorn, Heidi E.; Allen, Kyle D.

2014-01-01

Patients with osteoarthritis (OA) primarily seek treatment due to pain and disability, yet the primary endpoints for rodent OA models tend to be histological measures of joint destruction. The discrepancy between clinical and preclinical evaluations is problematic, given that radiographic evidence of OA in humans does not always correlate to the severity of patient-reported symptoms. Recent advances in behavioral analyses have provided new methods to evaluate disease sequelae in rodents. Of particular relevance to rodent OA models are methods to assess rodent gait. While obvious differences exist between quadrupedal and bipedal gait sequences, the gait abnormalities seen in humans and in rodent OA models reflect similar compensatory behaviors that protect an injured limb from loading. The purpose of this review is to describe these compensations and current methods used to assess rodent gait characteristics, while detailing important considerations for the selection of gait analysis methods in rodent OA models. PMID:25160712

Checking Equity: Why Differential Item Functioning Analysis Should Be a Routine Part of Developing Conceptual Assessments

PubMed Central

Martinková, Patrícia; Drabinová, Adéla; Liaw, Yuan-Ling; Sanders, Elizabeth A.; McFarland, Jenny L.; Price, Rebecca M.

2017-01-01

We provide a tutorial on differential item functioning (DIF) analysis, an analytic method useful for identifying potentially biased items in assessments. After explaining a number of methodological approaches, we test for gender bias in two scenarios that demonstrate why DIF analysis is crucial for developing assessments, particularly because simply comparing two groups’ total scores can lead to incorrect conclusions about test fairness. First, a significant difference between groups on total scores can exist even when items are not biased, as we illustrate with data collected during the validation of the Homeostasis Concept Inventory. Second, item bias can exist even when the two groups have exactly the same distribution of total scores, as we illustrate with a simulated data set. We also present a brief overview of how DIF analysis has been used in the biology education literature to illustrate the way DIF items need to be reevaluated by content experts to determine whether they should be revised or removed from the assessment. Finally, we conclude by arguing that DIF analysis should be used routinely to evaluate items in developing conceptual assessments. These steps will ensure more equitable—and therefore more valid—scores from conceptual assessments. PMID:28572182

Methods for detecting long-term CNS dysfunction after prenatal exposure to neurotoxins.

PubMed

Vorhees, C V

1997-11-01

Current U.S. Environmental Protection Agency regulatory guidelines for developmental neurotoxicity emphasize functional categories such as motor activity, auditory startle, and learning and memory. A single test of some simple form of learning and memory is accepted to meet the latter category. The rationale for this emphasis has been that sensitive and reliable methods for assessing complex learning and memory are either not available or are too burdensome, and that insufficient data exist to endorse one approach over another. There has been little discussion of the fact that learning and memory is not a single identifiable functional category and no single test can assess all types of learning and memory. Three methods for assessing complex learning and memory are presented that assess two different types of learning and memory, are relatively efficient to conduct, and are sensitive to several known neurobehavioral teratogens. The tests are a 9-unit multiple-T swimming maze, and the Morris and Barnes mazes. The first of these assesses sequential learning, while the latter two assess spatial learning. A description of each test is provided, along with procedures for their use, and data exemplifying effects obtained using developmental exposure to phenytoin, methamphetamine, and MDMA. It is argued that multiple tests of learning and memory are required to ascertain cognitive deficits; something no single method can accomplish. Methods for acoustic startle are also presented.

Scientific evaluation of the safety factor for the acceptable daily intake (ADI). Case study: butylated hydroxyanisole (BHA).

PubMed

Würtzen, G

1993-01-01

The principles of 'data-derived safety factors' are applied to toxicological and biochemical information on butylated hydroxyanisole (BHA). The calculated safety factor for an ADI is, by this method, comparable to the existing internationally recognized safety evaluations. Relevance for humans of forestomach tumours in rodents is discussed. The method provides a basis for organizing data in a way that permits an explicit assessment of its relevance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, Daithi A.; Hansen, Gerrit

Despite being a well-established research field, the detection and attribution of observed climate change to anthropogenic forcing is not yet provided as a climate service. One reason for this is the lack of a methodology for performing tailored detection and attribution assessments on a rapid time scale. Here we develop such an approach, based on the translation of quantitative analysis into the “confidence” language employed in recent Assessment Reports of the Intergovernmental Panel on Climate Change. While its systematic nature necessarily ignores some nuances examined in detailed expert assessments, the approach nevertheless goes beyond most detection and attribution studies inmore » considering contributors to building confidence such as errors in observational data products arising from sparse monitoring networks. When compared against recent expert assessments, the results of this approach closely match those of the existing assessments. Where there are small discrepancies, these variously reflect ambiguities in the details of what is being assessed, reveal nuances or limitations of the expert assessments, or indicate limitations of the accuracy of the sort of systematic approach employed here. Deployment of the method on 116 regional assessments of recent temperature and precipitation changes indicates that existing rules of thumb concerning the detectability of climate change ignore the full range of sources of uncertainty, most particularly the importance of adequate observational monitoring.« less

Application of Gumbel I and Monte Carlo methods to assess seismic hazard in and around Pakistan

NASA Astrophysics Data System (ADS)

Rehman, Khaista; Burton, Paul W.; Weatherill, Graeme A.

2018-05-01

A proper assessment of seismic hazard is of considerable importance in order to achieve suitable building construction criteria. This paper presents probabilistic seismic hazard assessment in and around Pakistan (23° N-39° N; 59° E-80° E) in terms of peak ground acceleration (PGA). Ground motion is calculated in terms of PGA for a return period of 475 years using a seismogenic-free zone method of Gumbel's first asymptotic distribution of extreme values and Monte Carlo simulation. Appropriate attenuation relations of universal and local types have been used in this study. The results show that for many parts of Pakistan, the expected seismic hazard is relatively comparable with the level specified in the existing PGA maps.

A Conceptual and Empirical Review of the Meaning, Measurement, Development, and Teaching of Intervention Competence in Clinical Psychology

PubMed Central

Barber, Jacques P.

2009-01-01

Through the course of this paper we discuss several fundamental issues related to the intervention competence of psychologists. Following definitional clarification and proposals for more strictly distinguishing competence from adherence, we interpret Dreyfus and Dreyfus’s (1986) five stage theory of competence development (from novice to expert) within a strictly clinical framework. Existing methods of competence assessment are then evaluated, and we argue for the use of new and multiple assessment modalities. Next, we utilize the previous sections as a foundation to propose methods for training and evaluating competent psychologists. Lastly, we discuss several potential impediments to large scale competence assessment and education, such as the heterogeneity of therapeutic orientations and what could be termed a lack of transparency in clinical training. PMID:18952334

National assessment of shoreline change: a GIS compilation of vector shorelines and associated shoreline change data for the north coast of Alaska, U.S.-Canadian border to Icy Cape

USGS Publications Warehouse

Gibbs, Ann E.; Karen A. Ohman,; Richmond, Bruce M.

2015-01-01

There is no widely accepted standard for analyzing shoreline change. Existing shoreline data measurements and rate calculation methods vary from study to study and prevent combining results into state-wide or regional assessments. The impetus behind the National Assessment project was to develop a standardized method of measuring changes in shoreline position that is consistent from coast to coast. The goal was to facilitate the process of periodically and systematically updating the results in an internally consistent manner. A detailed report on shoreline change for the north coast of Alaska that contains a discussion of the data presented here is available and cited in section, "Geospatial Data."

The use of rapid review methods in health technology assessments: 3 case studies.

PubMed

Kaltenthaler, Eva; Cooper, Katy; Pandor, Abdullah; Martyn-St James, Marrissa; Chatters, Robin; Wong, Ruth

2016-08-26

Rapid reviews are of increasing importance within health technology assessment due to time and resource constraints. There are many rapid review methods available although there is little guidance as to the most suitable methods. We present three case studies employing differing methods to suit the evidence base for each review and outline some issues to consider when selecting an appropriate method. Three recently completed systematic review short reports produced for the UK National Institute for Health Research were examined. Different approaches to rapid review methods were used in the three reports which were undertaken to inform the commissioning of services within the NHS and to inform future trial design. We describe the methods used, the reasoning behind the choice of methods and explore the strengths and weaknesses of each method. Rapid review methods were chosen to meet the needs of the review and each review had distinctly different challenges such as heterogeneity in terms of populations, interventions, comparators and outcome measures (PICO) and/or large numbers of relevant trials. All reviews included at least 10 randomised controlled trials (RCTs), each with numerous included outcomes. For the first case study (sexual health interventions), very diverse studies in terms of PICO were included. P-values and summary information only were presented due to substantial heterogeneity between studies and outcomes measured. For the second case study (premature ejaculation treatments), there were over 100 RCTs but also several existing systematic reviews. Data for meta-analyses were extracted directly from existing systematic reviews with new RCT data added where available. For the final case study (cannabis cessation therapies), studies included a wide range of interventions and considerable variation in study populations and outcomes. A brief summary of the key findings for each study was presented and narrative synthesis used to summarise results for each pair of interventions compared. Rapid review methods need to be chosen to meet both the nature of the evidence base of a review and the challenges presented by the included studies. Appropriate methods should be chosen after an assessment of the evidence base.

Different Teams, Same Conclusions? A Systematic Review of Existing Clinical Guidelines for the Assessment and Treatment of Tinnitus in Adults

PubMed Central

Fuller, Thomas E.; Haider, Haula F.; Kikidis, Dimitris; Lapira, Alec; Mazurek, Birgit; Norena, Arnaud; Rabau, Sarah; Lardinois, Rachelle; Cederroth, Christopher R.; Edvall, Niklas K.; Brueggemann, Petra G.; Rosing, Susanne N.; Kapandais, Anestis; Lungaard, Dorte; Hoare, Derek J.; Cima, Rilana F. F

2017-01-01

Background: Though clinical guidelines for assessment and treatment of chronic subjective tinnitus do exist, a comprehensive review of those guidelines has not been performed. The objective of this review was to identify current clinical guidelines, and compare their recommendations for the assessment and treatment of subjective tinnitus in adults. Method: We systematically searched a range of sources for clinical guidelines (as defined by the Institute of Medicine, United States) for the assessment and/or treatment of subjective tinnitus in adults. No restrictions on language or year of publication were applied to guidelines. Results: Clinical guidelines from Denmark, Germany, Sweden, The Netherlands, and the United States were included in the review. There was a high level of consistency across the guidelines with regard to recommendations for audiometric assessment, physical examination, use of a validated questionnaire(s) to assess tinnitus related distress, and referral to a psychologist when required. Cognitive behavioral treatment for tinnitus related distress, use of hearing aids in instances of hearing loss and recommendations against the use of medicines were consistent across the included guidelines. Differences between the guidelines centered on the use of imaging in assessment procedures and sound therapy as a form of treatment for tinnitus distress respectively. Conclusion: Given the level of commonality across tinnitus guidelines from different countries the development of a European guideline for the assessment and treatment of subjective tinnitus in adults seems feasible. This guideline would have the potential to benefit the large number of clinicians in countries where clinical guidelines do not yet exist, and would support standardization of treatment for patients across Europe. PMID:28275357

Different Teams, Same Conclusions? A Systematic Review of Existing Clinical Guidelines for the Assessment and Treatment of Tinnitus in Adults.

PubMed

Fuller, Thomas E; Haider, Haula F; Kikidis, Dimitris; Lapira, Alec; Mazurek, Birgit; Norena, Arnaud; Rabau, Sarah; Lardinois, Rachelle; Cederroth, Christopher R; Edvall, Niklas K; Brueggemann, Petra G; Rosing, Susanne N; Kapandais, Anestis; Lungaard, Dorte; Hoare, Derek J; Cima, Rilana F F

2017-01-01

Background: Though clinical guidelines for assessment and treatment of chronic subjective tinnitus do exist, a comprehensive review of those guidelines has not been performed. The objective of this review was to identify current clinical guidelines, and compare their recommendations for the assessment and treatment of subjective tinnitus in adults. Method: We systematically searched a range of sources for clinical guidelines (as defined by the Institute of Medicine, United States) for the assessment and/or treatment of subjective tinnitus in adults. No restrictions on language or year of publication were applied to guidelines. Results: Clinical guidelines from Denmark, Germany, Sweden, The Netherlands, and the United States were included in the review. There was a high level of consistency across the guidelines with regard to recommendations for audiometric assessment, physical examination, use of a validated questionnaire(s) to assess tinnitus related distress, and referral to a psychologist when required. Cognitive behavioral treatment for tinnitus related distress, use of hearing aids in instances of hearing loss and recommendations against the use of medicines were consistent across the included guidelines. Differences between the guidelines centered on the use of imaging in assessment procedures and sound therapy as a form of treatment for tinnitus distress respectively. Conclusion: Given the level of commonality across tinnitus guidelines from different countries the development of a European guideline for the assessment and treatment of subjective tinnitus in adults seems feasible. This guideline would have the potential to benefit the large number of clinicians in countries where clinical guidelines do not yet exist, and would support standardization of treatment for patients across Europe.

Evaluating co-creation of knowledge: from quality criteria and indicators to methods

NASA Astrophysics Data System (ADS)

Schuck-Zöller, Susanne; Cortekar, Jörg; Jacob, Daniela

2017-11-01

Basic research in the natural sciences rests on a long tradition of evaluation. However, since the San Francisco Declaration on Research Assessment (DORA) came out in 2012, there has been intense discussion in the natural sciences, above all amongst researchers and funding agencies in the different fields of applied research and scientific service. This discussion was intensified when climate services and other fields, used to make users participate in research and development activities (co-creation), demanded new evaluation methods appropriate to this new research mode. This paper starts by describing a comprehensive and interdisciplinary literature overview of indicators to evaluate co-creation of knowledge, including the different fields of integrated knowledge production. Then the authors harmonize the different elements of evaluation from literature in an evaluation cascade that scales down from very general evaluation dimensions to tangible assessment methods. They describe evaluation indicators already being documented and include a mixture of different assessment methods for two exemplary criteria. It is shown what can be deduced from already existing methodology for climate services and envisaged how climate services can further to develop their specific evaluation method.

Integrating human behaviour dynamics into flood disaster risk assessment

NASA Astrophysics Data System (ADS)

Aerts, J. C. J. H.; Botzen, W. J.; Clarke, K. C.; Cutter, S. L.; Hall, J. W.; Merz, B.; Michel-Kerjan, E.; Mysiak, J.; Surminski, S.; Kunreuther, H.

2018-03-01

The behaviour of individuals, businesses, and government entities before, during, and immediately after a disaster can dramatically affect the impact and recovery time. However, existing risk-assessment methods rarely include this critical factor. In this Perspective, we show why this is a concern, and demonstrate that although initial efforts have inevitably represented human behaviour in limited terms, innovations in flood-risk assessment that integrate societal behaviour and behavioural adaptation dynamics into such quantifications may lead to more accurate characterization of risks and improved assessment of the effectiveness of risk-management strategies and investments. Such multidisciplinary approaches can inform flood-risk management policy development.

A Novel Eye-Tracking Method to Assess Attention Allocation in Individuals with and without Aphasia Using a Dual-Task Paradigm

PubMed Central

Heuer, Sabine; Hallowell, Brooke

2015-01-01

Numerous authors report that people with aphasia have greater difficulty allocating attention than people without neurological disorders. Studying how attention deficits contribute to language deficits is important. However, existing methods for indexing attention allocation in people with aphasia pose serious methodological challenges. Eye-tracking methods have great potential to address such challenges. We developed and assessed the validity of a new dual-task method incorporating eye tracking to assess attention allocation. Twenty-six adults with aphasia and 33 control participants completed auditory sentence comprehension and visual search tasks. To test whether the new method validly indexes well-documented patterns in attention allocation, demands were manipulated by varying task complexity in single- and dual-task conditions. Differences in attention allocation were indexed via eye-tracking measures. For all participants significant increases in attention allocation demands were observed from single- to dual-task conditions and from simple to complex stimuli. Individuals with aphasia had greater difficulty allocating attention with greater task demands. Relationships between eye-tracking indices of comprehension during single and dual tasks and standardized testing were examined. Results support the validity of the novel eye-tracking method for assessing attention allocation in people with and without aphasia. Clinical and research implications are discussed. PMID:25913549

Research on Operation Assessment Method for Energy Meter

NASA Astrophysics Data System (ADS)

Chen, Xiangqun; Huang, Rui; Shen, Liman; chen, Hao; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Xu, Renheng

2018-03-01

The existing electric energy meter rotation maintenance strategy regularly checks the electric energy meter and evaluates the state. It only considers the influence of time factors, neglects the influence of other factors, leads to the inaccuracy of the evaluation, and causes the waste of resources. In order to evaluate the running state of the electric energy meter in time, a method of the operation evaluation of the electric energy meter is proposed. The method is based on extracting the existing data acquisition system, marketing business system and metrology production scheduling platform that affect the state of energy meters, and classified into error stability, operational reliability, potential risks and other factors according to the influencing factors, based on the above basic test score, inspecting score, monitoring score, score of family defect detection. Then, according to the evaluation model according to the scoring, we evaluate electric energy meter operating state, and finally put forward the corresponding maintenance strategy of rotation.

Physiologic measures of sexual function in women: a review.

PubMed

Woodard, Terri L; Diamond, Michael P

2009-07-01

To review and describe physiologic measures of assessing sexual function in women. Literature review. Studies that use instruments designed to measure female sexual function. Women participating in studies of female sexual function. Various instruments that measure physiologic features of female sexual function. Appraisal of the various instruments, including their advantages and disadvantages. Many unique physiologic methods of evaluating female sexual function have been developed during the past four decades. Each method has its benefits and limitations. Many physiologic methods exist, but most are not well-validated. In addition there has been an inability to correlate most physiologic measures with subjective measures of sexual arousal. Furthermore, given the complex nature of the sexual response in women, physiologic measures should be considered in context of other data, including the history, physical examination, and validated questionnaires. Nonetheless, the existence of appropriate physiologic measures is vital to our understanding of female sexual function and dysfunction.

An Exact Formula for Calculating Inverse Radial Lens Distortions

PubMed Central

Drap, Pierre; Lefèvre, Julien

2016-01-01

This article presents a new approach to calculating the inverse of radial distortions. The method presented here provides a model of reverse radial distortion, currently modeled by a polynomial expression, that proposes another polynomial expression where the new coefficients are a function of the original ones. After describing the state of the art, the proposed method is developed. It is based on a formal calculus involving a power series used to deduce a recursive formula for the new coefficients. We present several implementations of this method and describe the experiments conducted to assess the validity of the new approach. Such an approach, non-iterative, using another polynomial expression, able to be deduced from the first one, can actually be interesting in terms of performance, reuse of existing software, or bridging between different existing software tools that do not consider distortion from the same point of view. PMID:27258288

Monitoring Wetlands Area Using Microwave, Optical And In-Situ Data

NASA Astrophysics Data System (ADS)

Dabrowska, Katarzyna; Zielinska, Maria Budzynska

2011-01-01

The study of Wetlands has been continue within the PECS Project: “Study and implement remote sensing techniques for the assessment of carbon balances for different biomasses and soil moistures within various ecosystems”. The research has been conducted in Biebrza valley, one of the largest wetland in Europe, since 2003. Recently, to existing data base of wetlands monitoring Carbon flux measurements using the Chamber Method and Eddy Correlation Method have been included. The study aims at monitoring and mapping various soil-vegetation variables and the assessment of the level of carbon balance using optical and microwave satellite data along with ground truth observations. Optical images have been used for classification of wetlands vegetation and calculation of LAI and biomass. For the assessment of water balance, energy budget approach has been applied. Microwave images have been used for the assessment of soil moisture and biomass.

Assessment methods for rehabilitation.

PubMed

Biefang, S; Potthoff, P

1995-09-01

Diagnostics and evaluation in medical rehabilitation should be based on methods that are as objective as possible. In this context quantitative methods are an important precondition. We conducted for the German Pensions Insurance Institutions (which are in charge of the medical and vocational rehabilitation of workers and employees) a survey on assessment methods for rehabilitation which included an evaluation of American literature, with the aim to indicate procedures that can be considered for adaptation in Germany and to define further research requirements. The survey identified: (1) standardized procedures and instrumented tests for the assessment of musculoskeletal, cardiopulmonary and neurophysiological function; (2) personality, intelligence, achievement, neuropsychological and alcoholism screening tests for the assessment of mental or cognitive function; (3) rating scales and self-administered questionnaires for the assessment of Activities of Daily Living and Instrumental Activities of Daily Living (ADL/IADL Scales); (4) generic profiles and indexes as well as disease-specific measures for the assessment of health-related quality of life and health status; and (5) rating scales for vocational assessment. German equivalents or German versions exist only for a part of the procedures identified. Translation and testing of Anglo-Saxon procedures should have priority over the development of new German methods. The following procedures will be taken into account: (a) instrumented tests for physical function, (b) IADL Scales, (c) generic indexes of health-related quality of life, (d) specific quality of life and health status measures for disorders of the circulatory system, metabolic system, digestive organs, respiratory tract and for cancer, and (e) vocational rating scales.

32 CFR 651.38 - Existing environmental assessments.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 4 2011-07-01 2011-07-01 false Existing environmental assessments. 651.38...) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Assessment § 651.38 Existing environmental assessments. EAs are dynamic documents. To ensure that the described setting...

Psychological Assessment with the DSM-5 Alternative Model for Personality Disorders: Tradition and Innovation

PubMed Central

Waugh, Mark H.; Hopwood, Christopher J.; Krueger, Robert F.; Morey, Leslie C.; Pincus, Aaron L.; Wright, Aidan G. C.

2016-01-01

The Diagnostic and Statistical Manual of Mental Disorders Fifth Edition (DSM-5) Section III Alternative Model for Personality Disorders (AMPD; APA, 2013) represents an innovative system for simultaneous psychiatric classification and psychological assessment of personality disorders (PD). The AMPD combines major paradigms of personality assessment and provides an original, heuristic, flexible, and practical framework that enriches clinical thinking and practice. Origins, emerging research, and clinical application of the AMPD for diagnosis and psychological assessment are reviewed. The AMPD integrates assessment and research traditions, facilitates case conceptualization, is easy to learn and use, and assists in providing patient feedback. New as well as existing tests and psychometric methods may be used to operationalize the AMPD for clinical assessments. PMID:28450760

Psychological Assessment with the DSM-5 Alternative Model for Personality Disorders: Tradition and Innovation.

PubMed

Waugh, Mark H; Hopwood, Christopher J; Krueger, Robert F; Morey, Leslie C; Pincus, Aaron L; Wright, Aidan G C

2017-04-01

The Diagnostic and Statistical Manual of Mental Disorders Fifth Edition (DSM-5) Section III Alternative Model for Personality Disorders (AMPD; APA, 2013) represents an innovative system for simultaneous psychiatric classification and psychological assessment of personality disorders (PD). The AMPD combines major paradigms of personality assessment and provides an original, heuristic, flexible, and practical framework that enriches clinical thinking and practice. Origins, emerging research, and clinical application of the AMPD for diagnosis and psychological assessment are reviewed. The AMPD integrates assessment and research traditions, facilitates case conceptualization, is easy to learn and use, and assists in providing patient feedback. New as well as existing tests and psychometric methods may be used to operationalize the AMPD for clinical assessments.

Biodiversity in environmental assessment-current practice and tools for prediction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gontier, Mikael; Balfors, Berit; Moertberg, Ulla

Habitat loss and fragmentation are major threats to biodiversity. Environmental impact assessment and strategic environmental assessment are essential instruments used in physical planning to address such problems. Yet there are no well-developed methods for quantifying and predicting impacts of fragmentation on biodiversity. In this study, a literature review was conducted on GIS-based ecological models that have potential as prediction tools for biodiversity assessment. Further, a review of environmental impact statements for road and railway projects from four European countries was performed, to study how impact prediction concerning biodiversity issues was addressed. The results of the study showed the existing gapmore » between research in GIS-based ecological modelling and current practice in biodiversity assessment within environmental assessment.« less

Growing the Field of Health Impact Assessment in the United States: An Agenda for Research and Practice

PubMed Central

Dannenberg, Andrew L.; Bhatia, Rajiv; Cole, Brian L.; Dora, Carlos; Fielding, Jonathan E.; Kraft, Katherine; McClymont-Peace, Diane; Mindell, Jennifer; Onyekere, Chinwe; Roberts, James A.; Ross, Catherine L.; Rutt, Candace D.; Scott-Samuel, Alex; Tilson, Hugh H.

2006-01-01

Health impact assessment (HIA) methods are used to evaluate the impact on health of policies and projects in community design, transportation planning, and other areas outside traditional public health concerns. At an October 2004 workshop, domestic and international experts explored issues associated with advancing the use of HIA methods by local health departments, planning commissions, and other decisionmakers in the United States. Workshop participants recommended conducting pilot tests of existing HIA tools, developing a database of health impacts of common projects and policies, developing resources for HIA use, building workforce capacity to conduct HIAs, and evaluating HIAs. HIA methods can influence decisionmakers to adjust policies and projects to maximize benefits and minimize harm to the public’s health. PMID:16380558

Life cycle assessment for emerging materials: case study of a garden bed constructed from lumber produced with three different copper treatments

EPA Science Inventory

Although important data and methodological challenges facing LCA and emerging materials exist, this LCA captures material and process changes that are important drivers of environmental impacts. LCA methods need to be amended to reflect properties of emerging materials that deter...

The Association of Physical Activity and Academic Behavior: A Systematic Review

ERIC Educational Resources Information Center

Sullivan, Rachel A.; Kuzel, AnnMarie H.; Vaandering, Michael E.; Chen, Weiyun

2017-01-01

Background: In this systematic review, we assessed the existing research describing the effects of physical activity (PA) on academic behavior, with a special focus on the effectiveness of the treatments applied, study designs, outcome measures, and results. Methods: We obtained data from various journal search engines and 218 journal articles…

A Tool for Mapping Research Skills in Undergraduate Curricula

ERIC Educational Resources Information Center

Fraser, Gillian A.; Crook, Anne C.; Park, Julian R.

2007-01-01

There has been considerable interest recently in the teaching of skills to undergraduate students. However, existing methods for collating data on how much, where and when students are taught and assessed skills have often been shown to be time-consuming and ineffective. Here, we outline an electronic research skills audit tool that has been…

The Effectiveness of Community Practice Interventions: A Review of the Literature

ERIC Educational Resources Information Center

Ohmer, Mary L.; Korr, Wynne S.

2006-01-01

Objective: Evidence-based practice is becoming increasingly important in social work and community practice. The authors reviewed existing research to assess the level of evidence available to guide community practice. Method: The authors conducted a review of the literature on community practice intervention research from 1985 to 2002 using…

Metabolic Assessment of Suited Mobility Using Functional Tasks

NASA Technical Reports Server (NTRS)

Norcross, J. R.; McFarland, S. M.; Ploutz-Snyder, Robert

2016-01-01

Existing methods for evaluating extravehicular activity (EVA) suit mobility have typically focused on isolated joint range of motion or torque, but these techniques have little to do with how well a crewmember functionally performs in an EVA suit. To evaluate suited mobility at the system level through measuring metabolic cost (MC) of functional tasks.

A Methodology for Zumbo's Third Generation DIF Analyses and the Ecology of Item Responding

ERIC Educational Resources Information Center

Zumbo, Bruno D.; Liu, Yan; Wu, Amery D.; Shear, Benjamin R.; Olvera Astivia, Oscar L.; Ark, Tavinder K.

2015-01-01

Methods for detecting differential item functioning (DIF) and item bias are typically used in the process of item analysis when developing new measures; adapting existing measures for different populations, languages, or cultures; or more generally validating test score inferences. In 2007 in "Language Assessment Quarterly," Zumbo…

Measurement in Instructional Communication Research: A Decade in Review

ERIC Educational Resources Information Center

Mazer, Joseph P.; Graham, Elizabeth E.

2015-01-01

Periodic assessment and scrutiny of the discipline's measurement practices, instruments, and research findings are necessary to provide clarity and direction by revealing what we know, how we know it, and where the knowledge gaps exist. Reflective reviews have produced ample appraisals of the theory, research, and methods employed in the conduct…

An Investigation of Sample Size Splitting on ATFIND and DIMTEST

ERIC Educational Resources Information Center

Socha, Alan; DeMars, Christine E.

2013-01-01

Modeling multidimensional test data with a unidimensional model can result in serious statistical errors, such as bias in item parameter estimates. Many methods exist for assessing the dimensionality of a test. The current study focused on DIMTEST. Using simulated data, the effects of sample size splitting for use with the ATFIND procedure for…

Practitioner Review: The Assessment of Bipolar Disorder in Children and Adolescents

ERIC Educational Resources Information Center

Baroni, Argelinda; Lunsford, Jessica R.; Luckenbaugh, David A.; Towbin, Kenneth E.; Leibenluft, Ellen

2009-01-01

Background: An increasing number of youth are being diagnosed with, and treated for, bipolar disorder (BD). Controversy exists about whether youth with non-episodic irritability and symptoms of attention deficit hyperactivity disorder (ADHD) should be considered to have a developmental presentation of mania. Method: A selective review of the…

40 CFR 280.21 - Upgrading of existing UST systems.

Code of Federal Regulations, 2011 CFR

2011-07-01

... sound and free of corrosion holes prior to installing the cathodic protection system; or (ii) The tank... for corrosion holes by conducting two (2) tightness tests that meet the requirements of § 280.43(c... operation of the cathodic protection system; or (iv) The tank is assessed for corrosion holes by a method...

40 CFR 280.21 - Upgrading of existing UST systems.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sound and free of corrosion holes prior to installing the cathodic protection system; or (ii) The tank... for corrosion holes by conducting two (2) tightness tests that meet the requirements of § 280.43(c... operation of the cathodic protection system; or (iv) The tank is assessed for corrosion holes by a method...

A Human Factors Engineering Assessment of the Buffalo Mine Protection Clearance Vehicle Roof Hatch

DTIC Science & Technology

2007-10-01

this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data ...sources, gathering and maintaining the data needed, and completing and reviewing the collection information. Send comments regarding this burden...3 2. Method 4 2.1 Anthropometric Data

Projective Drawings of Mothers and Children Exposed to Intimate Partner Violence: A Mixed Methods Analysis

ERIC Educational Resources Information Center

Backos, Amy; Samuelson, Kristin W.

2017-01-01

The Kinetic Family Drawing (KFD) and the Draw-A-Person: Screening Procedure for Emotional Disturbance (DAP:SPED) are intended to facilitate therapeutic discussion and assess emotional disturbance; however, little research exists on their use with victims of trauma or for identifying posttraumatic stress disorder (PTSD). This study examined…

Validation of the Cultural Influence on Helping Scale among Chinese Adolescents

ERIC Educational Resources Information Center

Law, Ben M. F.; Shek, Daniel T. L.

2011-01-01

The influence of culture on adolescent prosocial behavior is a neglected aspect in existing studies. Objectives: This study evaluates the psychometric properties of the Cultural Influence on Helping Scale (CIHS) among Chinese adolescents. CIHS is an instrument that assesses Chinese cultural influence on helping other people. Method: The CIHS was…

Students' Perceptions of a Blended Web-Based Learning Environment

ERIC Educational Resources Information Center

Chandra, Vinesh; Fisher, Darrell L.

2009-01-01

The enhanced accessibility, affordability and capability of the Internet has created enormous possibilities in terms of designing, developing and implementing innovative teaching methods in the classroom. As existing pedagogies are revamped and new ones are added, there is a need to assess the effectiveness of these approaches from the students'…

Linguistic hesitant fuzzy multi-criteria decision-making method based on evidential reasoning

NASA Astrophysics Data System (ADS)

Zhou, Huan; Wang, Jian-qiang; Zhang, Hong-yu; Chen, Xiao-hong

2016-01-01

Linguistic hesitant fuzzy sets (LHFSs), which can be used to represent decision-makers' qualitative preferences as well as reflect their hesitancy and inconsistency, have attracted a great deal of attention due to their flexibility and efficiency. This paper focuses on a multi-criteria decision-making approach that combines LHFSs with the evidential reasoning (ER) method. After reviewing existing studies of LHFSs, a new order relationship and Hamming distance between LHFSs are introduced and some linguistic scale functions are applied. Then, the ER algorithm is used to aggregate the distributed assessment of each alternative. Subsequently, the set of aggregated alternatives on criteria are further aggregated to get the overall value of each alternative. Furthermore, a nonlinear programming model is developed and genetic algorithms are used to obtain the optimal weights of the criteria. Finally, two illustrative examples are provided to show the feasibility and usability of the method, and comparison analysis with the existing method is made.

Adapting Human Reliability Analysis from Nuclear Power to Oil and Gas Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boring, Ronald Laurids

2015-09-01

ABSTRACT: Human reliability analysis (HRA), as currently used in risk assessments, largely derives its methods and guidance from application in the nuclear energy domain. While there are many similarities be-tween nuclear energy and other safety critical domains such as oil and gas, there remain clear differences. This paper provides an overview of HRA state of the practice in nuclear energy and then describes areas where refinements to the methods may be necessary to capture the operational context of oil and gas. Many key distinctions important to nuclear energy HRA such as Level 1 vs. Level 2 analysis may prove insignifi-cantmore » for oil and gas applications. On the other hand, existing HRA methods may not be sensitive enough to factors like the extensive use of digital controls in oil and gas. This paper provides an overview of these con-siderations to assist in the adaptation of existing nuclear-centered HRA methods to the petroleum sector.« less

Research and engineering assessment of biological solubilization of phosphate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, R.D.; McIlwain, M.E.; Losinski, S.J.

This research and engineering assessment examined a microbial phosphate solubilization process as a method of recovering phosphate from phosphorus containing ore compared to the existing wet acid and electric arc methods. A total of 860 microbial isolates, collected from a range of natural environments were tested for their ability to solubilize phosphate from rock phosphate. A bacterium (Pseudomonas cepacia) was selected for extensive characterization and evaluation of the mechanism of phosphate solubilization and of process engineering parameters necessary to recover phosphate from rock phosphate. These studies found that concentration of hydrogen ion and production of organic acids arising from oxidationmore » of the carbon source facilitated microbial solubilization of both pure chemical insoluble phosphate compounds and phosphate rock. Genetic studies found that phosphate solubilization was linked to an enzyme system (glucose dehydrogenase). Process-related studies found that a critical solids density of 1% by weight (ore to liquid) was necessary for optimal solubilization. An engineering analysis evaluated the cost and energy requirements for a 2 million ton per year sized plant, whose size was selected to be comparable to existing wet acid plants.« less

Identification and ranking of environmental threats with ecosystem vulnerability distributions.

PubMed

Zijp, Michiel C; Huijbregts, Mark A J; Schipper, Aafke M; Mulder, Christian; Posthuma, Leo

2017-08-24

Responses of ecosystems to human-induced stress vary in space and time, because both stressors and ecosystem vulnerabilities vary in space and time. Presently, ecosystem impact assessments mainly take into account variation in stressors, without considering variation in ecosystem vulnerability. We developed a method to address ecosystem vulnerability variation by quantifying ecosystem vulnerability distributions (EVDs) based on monitoring data of local species compositions and environmental conditions. The method incorporates spatial variation of both abiotic and biotic variables to quantify variation in responses among species and ecosystems. We show that EVDs can be derived based on a selection of locations, existing monitoring data and a selected impact boundary, and can be used in stressor identification and ranking for a region. A case study on Ohio's freshwater ecosystems, with freshwater fish as target species group, showed that physical habitat impairment and nutrient loads ranked highest as current stressors, with species losses higher than 5% for at least 6% of the locations. EVDs complement existing approaches of stressor assessment and management, which typically account only for variability in stressors, by accounting for variation in the vulnerability of the responding ecosystems.

Assessing and Testing Hydrokinetic Turbine Performance and Effects on Open Channel Hydrodynamics: An Irrigation Canal Case Study.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gunawan, Budi; Neary, Vincent Sinclair; Mortensen, Josh

Hydrokinetic energy from flowing water in open channels has the potential to support local electricity needs with lower regulatory or capital investment than impounding water with more conventional means. MOU agencies involved in federal hydropower development have identified the need to better understand the opportunities for hydrokinetic (HK) energy development within existing canal systems that may already have integrated hydropower plants. This document provides an overview of the main considerations, tools, and assessment methods, for implementing field tests in an open-channel water system to characterize current energy converter (CEC) device performance and hydrodynamic effects. It describes open channel processes relevantmore » to their HK site and perform pertinent analyses to guide siting and CEC layout design, with the goal of streamlining the evaluation process and reducing the risk of interfering with existing uses of the site. This document outlines key site parameters of interest and effective tools and methods for measurement and analysis with examples drawn from the Roza Main Canal, in Yakima, WA to illustrate a site application.« less

Multiple, correlated covariates associated with differential item functioning (DIF): Accounting for language DIF when education levels differ across languages.

PubMed

Gibbons, Laura E; Crane, Paul K; Mehta, Kala M; Pedraza, Otto; Tang, Yuxiao; Manly, Jennifer J; Narasimhalu, Kaavya; Teresi, Jeanne; Jones, Richard N; Mungas, Dan

2011-04-28

Differential item functioning (DIF) occurs when a test item has different statistical properties in subgroups, controlling for the underlying ability measured by the test. DIF assessment is necessary when evaluating measurement bias in tests used across different language groups. However, other factors such as educational attainment can differ across language groups, and DIF due to these other factors may also exist. How to conduct DIF analyses in the presence of multiple, correlated factors remains largely unexplored. This study assessed DIF related to Spanish versus English language in a 44-item object naming test. Data come from a community-based sample of 1,755 Spanish- and English-speaking older adults. We compared simultaneous accounting, a new strategy for handling differences in educational attainment across language groups, with existing methods. Compared to other methods, simultaneously accounting for language- and education-related DIF yielded salient differences in some object naming scores, particularly for Spanish speakers with at least 9 years of education. Accounting for factors that vary across language groups can be important when assessing language DIF. The use of simultaneous accounting will be relevant to other cross-cultural studies in cognition and in other fields, including health-related quality of life.

Multiple, correlated covariates associated with differential item functioning (DIF): Accounting for language DIF when education levels differ across languages

PubMed Central

Gibbons, Laura E.; Crane, Paul K.; Mehta, Kala M.; Pedraza, Otto; Tang, Yuxiao; Manly, Jennifer J.; Narasimhalu, Kaavya; Teresi, Jeanne; Jones, Richard N.; Mungas, Dan

2012-01-01

Differential item functioning (DIF) occurs when a test item has different statistical properties in subgroups, controlling for the underlying ability measured by the test. DIF assessment is necessary when evaluating measurement bias in tests used across different language groups. However, other factors such as educational attainment can differ across language groups, and DIF due to these other factors may also exist. How to conduct DIF analyses in the presence of multiple, correlated factors remains largely unexplored. This study assessed DIF related to Spanish versus English language in a 44-item object naming test. Data come from a community-based sample of 1,755 Spanish- and English-speaking older adults. We compared simultaneous accounting, a new strategy for handling differences in educational attainment across language groups, with existing methods. Compared to other methods, simultaneously accounting for language- and education-related DIF yielded salient differences in some object naming scores, particularly for Spanish speakers with at least 9 years of education. Accounting for factors that vary across language groups can be important when assessing language DIF. The use of simultaneous accounting will be relevant to other cross-cultural studies in cognition and in other fields, including health-related quality of life. PMID:22900138

[Methodological aspects of the assessment of phytotoxicic properties of ice-melter reagents].

PubMed

Sbitnev, A V; Vodianova, M A; Kriatov, I A; Donerian, L G; Evseeva, I S; Ushakova, O V; Ushakov, D I; Matveeva, I S; Rodionova, O M

One of the main criteria which determine the possibility of the use of a particular type of ice-melter reagents (IMR) is the degree of their safety for the environment and human health, which is reflected in the establishment of safe doses and concentrations. In this regard, the current area of research is to improve the ecological and epidemiological principles of risk assessment of modern types of anti-icing agents. Currently available data concerning monitoring soil studies and the snow held in various cities of Russia, show that there is a process of accumulation of the main components of IMR - sodium and chlorine ions in the areas related to the roadway. The article is designated a problem of existing methodological approaches to the assessment of the phytotoxic impact in the investigation of anti-icing agents in the laboratory. There was executed the comparative characteristics of the results of the preliminary pilot studies on the phytotoxic properties of IMR under using different substrates for germination of seeds - soil and filter paper. The data obtained are characterized by differences in the degree of phytotoxic action of the same species depending upon ice-melter reagents methodical setting circuit laboratory experiment. As a result, there was shown the imperfection of the existing method of rapid analysis in relation to ice-melter materials (IMM).

The RFad Method--a new fatigue recovery time assessment for industrial activities.

PubMed

Silva e Santos, Marcello; Vidal, Mario Cesar Rodriguez; Moreira, Sergio Bastos

2012-01-01

This paper presents a study about fatigue recovery time assessment processes in work activities. It came about due to a demand presented by an automotive industry giant, in need of updating existing cycle time sheets and TAKT time parameters. The company decided to hire an Ergonomics Laboratory with ties to a major Brazilian University in order to evaluate current conditions and establish a new method to either calculate recovery times or validate existing assessment criteria, based in the ergonomics evaluation of the work activities. It is clear that there has been evident evolution in the industrial sector in the past two decades. It brought up fast modernization of industrial processes, not only in production but also in terms of management systems. Due to improved computer and robotics systems, combined with overall operational advancements - like the use of lighter hand tools and more effective hoist systems - most work activities have had its physical effort requirements reduced in the past decades. Thus, compensation factors built into production times need to be reviewed in order to avoid unnecessary costs associated to them. By using ergonomics considerations, we prevent simply removing the physical variables built in rest time calculations without taking on account, for example, additional cognitive load represented by the use of more sophisticated pieces of equipment.

The use of virtual environments for percentage view analysis.

PubMed

Schofield, Damian; Cox, Christopher J B

2005-09-01

It is recognised that Visual Impact Assessment (VIA), unlike many other aspects of Environmental Impact Assessments (EIA), relies less upon measurement than upon experience and judgement. Hence, it is necessary for a more structured and consistent approach towards VIA, reducing the amount of bias and subjectivity. For proposed developments, there are very few quantitative techniques for the evaluation of visibility, and these existing methods can be highly inaccurate and time consuming. Percentage view changes are one of the few quantitative techniques, and the use of computer technology can reduce the inaccuracy and the time spent evaluating the visibility of either existing or proposed developments. For over 10 years, research work undertaken by the authors at the University of Nottingham has employed Computer Graphics (CG) and Virtual Reality (VR) in civilian and industrial contexts for environmental planning, design visualisation, accident reconstruction, risk analysis, data visualisation and training simulators. This paper describes a method to quantitatively assess the visual impact of proposed developments on the landscape using CG techniques. This method allows the determination of accurate percentage view changes with the use of a computer-generated model of the environment and the application of specialist software that has been developed at the University of Nottingham. The principles are easy to understand and therefore planners, authorisation agencies and members of the public can use and understand the results. A case study is shown to demonstrate the application and the capabilities of the technology.

[Health assessment and economic assessment in health: introduction to the debate on the points of intersection].

PubMed

Sancho, Leyla Gomes; Dain, Sulamis

2012-03-01

The study aims to infer the existence of a continuum between Health Assessment and Economic Assessment in Health, by highlighting points of intersection of these forms of appraisal. To achieve this, a review of the theoretical foundations, methods and approaches of both forms of assessment was conducted. It was based on the theoretical model of health evaluation as reported by Hartz et al and economic assessment in health approaches reported by Brouwer et al. It was seen that there is a continuum between the theoretical model of evaluative research and the extrawelfarist approach for economic assessment in health, and between the normative theoretical model for health assessment and the welfarist approaches for economic assessment in health. However, in practice the assessment is still conducted using the normative theoretical model and with a welfarist approach.

Applicability of ambient toxicity testing to national or regional water-quality assessment

USGS Publications Warehouse

Elder, J.F.

1989-01-01

Comprehensive assessment of the quality of natural waters requires a multifaceted approach. Based on experimentation designed to monitor responses of organisms to environmental stresses, toxicity testing may have diverse purposes in water quality assessments. These purposes may include identification that warrant further study because of poor water quality or unusual ecological features, verification of other types of monitoring, or assessment of contaminant effects on aquatic communities. A wide variety of toxicity test methods have been developed to fulfill the needs of diverse applications. The methods differ primarily in the full selections made relative to four characteristics: (1) test species, (2) endpoints (acute or chronic), (3) test enclosure type, and (4) test substance (toxicant) that functions as the environmental stress. Toxicity test approachs vary in their capacity to meet the needs of large-scale assessments of existing water quality. Ambient testing is more likely to meet these needs than are the procedures that call for exposure of the test organisms to known concentrations of a single toxicant. However, meaningful interpretation of ambient test results depend on the existence of accompanying chemical analysis of the ambient media. The ambient test substance may be water or sediments. Sediment tests have had limited application, but they are useful because of the fact that most toxicants tend to accumulate in sediments, and many test species either inhabit the sediments or are in frequent contact with them. Biochemical testing methods, which have been developing rapidly in recent years, are likely to be among the most useful procedures for large-scale water quality assessments. They are relatively rapid and simple, and more importantly, they focus on biochemical changes that are the initial responses of virtually all organisms to environmental stimuli. Most species are sensitive to relatively few toxicants and their sensitivities vary as conditions change. One of the most informative approaches for toxicity testing is to combine biochemical tests with other test methods in a ' battery or tests ' that is diversified enough to characterize different types of toxicants and different trophic levels. (Lantz-PTT)

Combinational Reasoning of Quantitative Fuzzy Topological Relations for Simple Fuzzy Regions

PubMed Central

Liu, Bo; Li, Dajun; Xia, Yuanping; Ruan, Jian; Xu, Lili; Wu, Huanyi

2015-01-01

In recent years, formalization and reasoning of topological relations have become a hot topic as a means to generate knowledge about the relations between spatial objects at the conceptual and geometrical levels. These mechanisms have been widely used in spatial data query, spatial data mining, evaluation of equivalence and similarity in a spatial scene, as well as for consistency assessment of the topological relations of multi-resolution spatial databases. The concept of computational fuzzy topological space is applied to simple fuzzy regions to efficiently and more accurately solve fuzzy topological relations. Thus, extending the existing research and improving upon the previous work, this paper presents a new method to describe fuzzy topological relations between simple spatial regions in Geographic Information Sciences (GIS) and Artificial Intelligence (AI). Firstly, we propose a new definition for simple fuzzy line segments and simple fuzzy regions based on the computational fuzzy topology. And then, based on the new definitions, we also propose a new combinational reasoning method to compute the topological relations between simple fuzzy regions, moreover, this study has discovered that there are (1) 23 different topological relations between a simple crisp region and a simple fuzzy region; (2) 152 different topological relations between two simple fuzzy regions. In the end, we have discussed some examples to demonstrate the validity of the new method, through comparisons with existing fuzzy models, we showed that the proposed method can compute more than the existing models, as it is more expressive than the existing fuzzy models. PMID:25775452

Ecotoxicity testing: science, politics and ethics.

PubMed

Walker, Colin H

2008-02-01

Animal welfare organisations have long been concerned about the use of animals for ecotoxicity testing. Ecotoxicity testing is a necessary part of the statutory risk assessment of chemicals that may be released into the environment. It is sometimes also carried out during the development of new chemicals and in the investigation of pollution in the field. This review considers the existing requirements for ecotoxicity testing, with particular reference to practices in the European Union, including the recent REACH system proposals, before discussing criticisms that have been made of existing practices for environmental risk assessment. These criticisms have been made on scientific and ethical grounds, as well as on questions of cost. A case is made for greater investment in the development of alternative testing methods, which could improve the science, as well as serving the cause of animal welfare. It has frequently been suggested that the statutory requirements for environmental risk assessment are too rigid and bureaucratic. A case is made for flexibility and the greater involvement of scientists in the risk assessment procedure, in the interests of both improved science and improved animal welfare.

Environmental control implications of generating electric power from coal. 1977 technology status report. Appendix D. Assessment of NO/sub x/ control technology for coal fired utility boilers. [Low-excess-air, staged combustion, flu gas recirculation and burner design

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1977-12-01

An NOx control technology assessment study was conducted to examine the effectiveness of low-excess-air firing, staged combustion, flue gas recirculation, and current burner/boiler designs as applied to coal-fired utility boilers. Significant variations in NOx emissions exist with boiler type, firing method, and coal type, but a relative comparison of emissions control performance, cost, and operational considerations is presented for each method. The study emphasized the numerous operational factors that are of major importance to the user in selecting and implementing a combustion modification technique. Staged combustion and low-excess-air operation were identified as the most cost-effective methods for existing units. Closemore » control of local air/fuel ratios and rigorous combustion equipment maintenance are essential to the success of both methods. Flue gas recirculation is relatively ineffective and has the added concern of tube erosion. More research is needed to resolve potential corrosion concerns with low-NOx operating modes. Low-NOx burners in conjunction with a compartmentalized windbox are capable of meeting a 0.6-lb/million Btu emission level on new units. Advanced burner designs are being developed to meet research emission goals of approximately 0.25 lb/MBtu.« less

Assessment of the safety of foods derived from genetically modified (GM) crops.

PubMed

König, A; Cockburn, A; Crevel, R W R; Debruyne, E; Grafstroem, R; Hammerling, U; Kimber, I; Knudsen, I; Kuiper, H A; Peijnenburg, A A C M; Penninks, A H; Poulsen, M; Schauzu, M; Wal, J M

2004-07-01

This paper provides guidance on how to assess the safety of foods derived from genetically modified crops (GM crops); it summarises conclusions and recommendations of Working Group 1 of the ENTRANSFOOD project. The paper provides an approach for adapting the test strategy to the characteristics of the modified crop and the introduced trait, and assessing potential unintended effects from the genetic modification. The proposed approach to safety assessment starts with the comparison of the new GM crop with a traditional counterpart that is generally accepted as safe based on a history of human food use (the concept of substantial equivalence). This case-focused approach ensures that foods derived from GM crops that have passed this extensive test-regime are as safe and nutritious as currently consumed plant-derived foods. The approach is suitable for current and future GM crops with more complex modifications. First, the paper reviews test methods developed for the risk assessment of chemicals, including food additives and pesticides, discussing which of these methods are suitable for the assessment of recombinant proteins and whole foods. Second, the paper presents a systematic approach to combine test methods for the safety assessment of foods derived from a specific GM crop. Third, the paper provides an overview on developments in this area that may prove of use in the safety assessment of GM crops, and recommendations for research priorities. It is concluded that the combination of existing test methods provides a sound test-regime to assess the safety of GM crops. Advances in our understanding of molecular biology, biochemistry, and nutrition may in future allow further improvement of test methods that will over time render the safety assessment of foods even more effective and informative. Copryright 2004 Elsevier Ltd.

Rapid systematic assessment of the detection and attribution of regional anthropogenic climate change

DOE PAGES

Stone, Daithi A.; Hansen, Gerrit

2015-11-21

Despite being a well-established research field, the detection and attribution of observed climate change to anthropogenic forcing is not yet provided as a climate service. One reason for this is the lack of a methodology for performing tailored detection and attribution assessments on a rapid time scale. Here we develop such an approach, based on the translation of quantitative analysis into the “confidence” language employed in recent Assessment Reports of the Intergovernmental Panel on Climate Change. While its systematic nature necessarily ignores some nuances examined in detailed expert assessments, the approach nevertheless goes beyond most detection and attribution studies inmore » considering contributors to building confidence such as errors in observational data products arising from sparse monitoring networks. When compared against recent expert assessments, the results of this approach closely match those of the existing assessments. Where there are small discrepancies, these variously reflect ambiguities in the details of what is being assessed, reveal nuances or limitations of the expert assessments, or indicate limitations of the accuracy of the sort of systematic approach employed here. Deployment of the method on 116 regional assessments of recent temperature and precipitation changes indicates that existing rules of thumb concerning the detectability of climate change ignore the full range of sources of uncertainty, most particularly the importance of adequate observational monitoring.« less

Stroke rehabilitation at home using virtual reality, haptics and telemedicine.

PubMed

Rydmark, Martin; Broeren, Jörgen; Pascher, Ragnar

2002-01-01

The objective of this pilot study is to identify the level of difficulty in which subjects with left hemisphere damage in the acute phase after stroke can start practicing in a virtual environment. Second, to test an application of Virtual Reality technology to existing occupational treatment methods in stroke rehabilitation and develop a platform for home rehabilitation controlled telemedically. The findings indicate that the system shows potential as an assessment and training device. The feasibility study setup is working well likewise the assessment method. Developing and increasing the complexity of the tasks must be based on the patient individual neurology, and that the cinematic motion patterns of the patient's are the basis for exercise design.

A critical analysis of the numerical and analytical methods used in the construction of the lunar gravity potential model.

NASA Astrophysics Data System (ADS)

Tuckness, D. G.; Jost, B.

1995-08-01

Current knowledge of the lunar gravity field is presented. The various methods used in determining these gravity fields are investigated and analyzed. It will be shown that weaknesses exist in the current models of the lunar gravity field. The dominant part of this weakness is caused by the lack of lunar tracking data information (farside, polar areas), which makes modeling the total lunar potential difficult. Comparisons of the various lunar models reveal an agreement in the low-order coefficients of the Legendre polynomials expansions. However, substantial differences in the models can exist in the higher-order harmonics. The main purpose of this study is to assess today's lunar gravity field models for use in tomorrow's lunar mission designs and operations.

The development of a primary dental care outreach course.

PubMed

Waterhouse, P; Maguire, A; Tabari, D; Hind, V; Lloyd, J

2008-02-01

The aim of this work was to develop the first north-east based primary dental care outreach (PDCO) course for clinical dental undergraduate students at Newcastle University. The process of course design will be described and involved review of the existing Bachelor of Dental Surgery (BDS) degree course in relation to previously published learning outcomes. Areas were identified where the existing BDS course did not meet fully these outcomes. This was followed by setting the PDCO course aims and objectives, intended learning outcomes, curriculum and structure. The educational strategy and methods of teaching and learning were subsequently developed together with a strategy for overall quality control of the teaching and learning experience. The newly developed curriculum was aligned with appropriate student assessment methods, including summative, formative and ipsative elements.

Assessing the limitations of the existing physician directory for measuring electronic health record (EHR) adoption rates among physicians in Connecticut, USA: cross-sectional study.

PubMed

Tikoo, Minakshi

2012-01-01

To assess the limitations of the existing physician directory in measuring electronic health record adoption rates among a cohort of Connecticut physicians. A population-based mailing assessed the number of physicians practising in Connecticut. Information about practice site, practises pertaining to storing of patient information, sources of revenue and preferred method for receiving survey. Practice status in Connecticut, measured by yes and no. Demographic information was collected on gender, year of birth, race and ethnicity. The response rate for the postcard mailing was 19% (3105/16 462). Of the 16 462 unduplicated consumers, 233 (1%) were retired and 5828 (35%) did not practise in Connecticut. Of the 3105 valid postcard responses we received, 2159 were for physicians practising in Connecticut. Nine (0.4%) of these responses did not specify a preferred method for receiving the full physician survey; 91 physicians refused to participate in the survey; 2159 surveys were sent out using each physician's requested method for receiving the survey, that is, web-based, regular mail or telephone. As of August 2012, 898 physicians had returned surveys, resulting in a response rate of 42%. The postcard response rate based on the unduplicated lists adjusted for exclusions, such as death, retired and do not practise in Connecticut, is 30%, which is low. We may be missing physicians' population which could greatly affect the indicators being used to measure change in electronic health record adoption rates. It is difficult to obtain an accurate physician count of practising physicians in Connecticut from the existing lists. States that are participating in the projects funded under various Office of the National Coordinator for Health Information Technology (ONC) initiatives must focus on getting an accurate count of the physicians practising in their state, since their progress is being measured based on this key number.

Assessment of a simple, novel endoluminal method for gastrotomy closure in NOTES.

PubMed

Lee, Sang Soo; Oelschlager, Brant K; Wright, Andrew S; Soares, Renato V; Sinan, Huseyin; Montenovo, Martin I; Hwang, Joo Ha

2011-10-01

A reliable method for gastrotomy closure in NOTES will be essential for NOTES to become viable clinically. However, methods using existing and widely available endoscopic accessories have been ineffective. The objective of this study was to evaluate the feasibility and safety of a new simple method for gastric closure (retracted clip-assisted loop closure) that uses existing endoscopic accessories with minor modifications. The retracted clip-assisted loop closure technique involves deploying 3-4 Resolution(®) clips (modified by attaching a 90-cm length of suture to the end of each clip) along the margin of the gastrotomy with one jaw on the serosal surface and the other jaw on the mucosal surface. The suture strings are threaded through an endoloop. Traction is then applied to the strings causing the gastric wall to tent. The endoloop is secured below the tip of the clips, completing a full-thickness gastrotomy closure. The main outcome measures were feasibility, efficacy, and safety of the new retracted clip-assisted loop closure technique for NOTES gastrotomy closure. An air-tight seal was achieved in 100% (n = 9) of stomachs. The mean leak pressure was 116.3 (±19.4) mmHg. The retracted clip-assisted loop closure technique can be used to perform NOTES gastrotomy closure by using existing endoscopic accessories with minor modifications.

A novel risk assessment method for landfill slope failure: Case study application for Bhalswa Dumpsite, India.

PubMed

Jahanfar, Ali; Amirmojahedi, Mohsen; Gharabaghi, Bahram; Dubey, Brajesh; McBean, Edward; Kumar, Dinesh

2017-03-01

Rapid population growth of major urban centres in many developing countries has created massive landfills with extraordinary heights and steep side-slopes, which are frequently surrounded by illegal low-income residential settlements developed too close to landfills. These extraordinary landfills are facing high risks of catastrophic failure with potentially large numbers of fatalities. This study presents a novel method for risk assessment of landfill slope failure, using probabilistic analysis of potential failure scenarios and associated fatalities. The conceptual framework of the method includes selecting appropriate statistical distributions for the municipal solid waste (MSW) material shear strength and rheological properties for potential failure scenario analysis. The MSW material properties for a given scenario is then used to analyse the probability of slope failure and the resulting run-out length to calculate the potential risk of fatalities. In comparison with existing methods, which are solely based on the probability of slope failure, this method provides a more accurate estimate of the risk of fatalities associated with a given landfill slope failure. The application of the new risk assessment method is demonstrated with a case study for a landfill located within a heavily populated area of New Delhi, India.

Validation in Support of Internationally Harmonised OECD Test Guidelines for Assessing the Safety of Chemicals.

PubMed

Gourmelon, Anne; Delrue, Nathalie

Ten years elapsed since the OECD published the Guidance document on the validation and international regulatory acceptance of test methods for hazard assessment. Much experience has been gained since then in validation centres, in countries and at the OECD on a variety of test methods that were subjected to validation studies. This chapter reviews validation principles and highlights common features that appear to be important for further regulatory acceptance across studies. Existing OECD-agreed validation principles will most likely generally remain relevant and applicable to address challenges associated with the validation of future test methods. Some adaptations may be needed to take into account the level of technique introduced in test systems, but demonstration of relevance and reliability will continue to play a central role as pre-requisite for the regulatory acceptance. Demonstration of relevance will become more challenging for test methods that form part of a set of predictive tools and methods, and that do not stand alone. OECD is keen on ensuring that while these concepts evolve, countries can continue to rely on valid methods and harmonised approaches for an efficient testing and assessment of chemicals.

Health equity impact assessment.

PubMed

Povall, Susan L; Haigh, Fiona A; Abrahams, Debbie; Scott-Samuel, Alex

2014-12-01

The World Health Organization's Commission on Social Determinants of Health has called for 'health equity impact assessments' of all economic agreements, market regulation and public policies. We carried out an international study to clarify if existing health impact assessment (HIA) methods are adequate for the task of global health equity assessments. We triangulated data from a scoping review of the international literature, in-depth interviews with health equity and HIA experts and an international stakeholder workshop. We found that equity is not addressed adequately in HIAs for a variety of reasons, including inadequate guidance, absence of definitions, poor data and evidence, perceived lack of methods and tools and practitioner unwillingness or inability to address values like fairness and social justice. Current methods can address immediate, 'downstream' factors, but not the root causes of inequity. Extending HIAs to cover macro policy and global equity issues will require new tools to address macroeconomic policies, historical roots of inequities and upstream causes like power imbalances. More sensitive, participatory methods are also required. There is, however, no need for the development of a completely new methodology. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Analysis of Photovoltaic System Energy Performance Evaluation Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurtz, S.; Newmiller, J.; Kimber, A.

2013-11-01

Documentation of the energy yield of a large photovoltaic (PV) system over a substantial period can be useful to measure a performance guarantee, as an assessment of the health of the system, for verification of a performance model to then be applied to a new system, or for a variety of other purposes. Although the measurement of this performance metric might appear to be straight forward, there are a number of subtleties associated with variations in weather and imperfect data collection that complicate the determination and data analysis. A performance assessment is most valuable when it is completed with amore » very low uncertainty and when the subtleties are systematically addressed, yet currently no standard exists to guide this process. This report summarizes a draft methodology for an Energy Performance Evaluation Method, the philosophy behind the draft method, and the lessons that were learned by implementing the method.« less

Suitability of analytical methods to measure solubility for the purpose of nanoregulation.

PubMed

Tantra, Ratna; Bouwmeester, Hans; Bolea, Eduardo; Rey-Castro, Carlos; David, Calin A; Dogné, Jean-Michel; Jarman, John; Laborda, Francisco; Laloy, Julie; Robinson, Kenneth N; Undas, Anna K; van der Zande, Meike

2016-01-01

Solubility is an important physicochemical parameter in nanoregulation. If nanomaterial is completely soluble, then from a risk assessment point of view, its disposal can be treated much in the same way as "ordinary" chemicals, which will simplify testing and characterisation regimes. This review assesses potential techniques for the measurement of nanomaterial solubility and evaluates the performance against a set of analytical criteria (based on satisfying the requirements as governed by the cosmetic regulation as well as the need to quantify the concentration of free (hydrated) ions). Our findings show that no universal method exists. A complementary approach is thus recommended, to comprise an atomic spectrometry-based method in conjunction with an electrochemical (or colorimetric) method. This article shows that although some techniques are more commonly used than others, a huge research gap remains, related with the need to ensure data reliability.

Intrinsic Frequency and the Single Wave Biopsy

PubMed Central

Petrasek, Danny; Pahlevan, Niema M.; Tavallali, Peyman; Rinderknecht, Derek G.; Gharib, Morteza

2015-01-01

Insulin resistance is the hallmark of classical type II diabetes. In addition, insulin resistance plays a central role in metabolic syndrome, which astonishingly affects 1 out of 3 adults in North America. The insulin resistance state can precede the manifestation of diabetes and hypertension by years. Insulin resistance is correlated with a low-grade inflammatory condition, thought to be induced by obesity as well as other conditions. Currently, the methods to measure and monitor insulin resistance, such as the homeostatic model assessment and the euglycemic insulin clamp, can be impractical, expensive, and invasive. Abundant evidence exists that relates increased pulse pressure, pulse wave velocity (PWV), and vascular dysfunction with insulin resistance. We introduce a potential method of assessing insulin resistance that relies on a novel signal-processing algorithm, the intrinsic frequency method (IFM). The method requires a single pulse pressure wave, thus the term “ wave biopsy.” PMID:26183600

Environmental exposure assessment in European birth cohorts: results from the ENRIECO project

PubMed Central

2013-01-01

Environmental exposures during pregnancy and early life may have adverse health effects. Single birth cohort studies often lack statistical power to tease out such effects reliably. To improve the use of existing data and to facilitate collaboration among these studies, an inventory of the environmental exposure and health data in these studies was made as part of the ENRIECO (Environmental Health Risks in European Birth Cohorts) project. The focus with regard to exposure was on outdoor air pollution, water contamination, allergens and biological organisms, metals, pesticides, smoking and second hand tobacco smoke (SHS), persistent organic pollutants (POPs), noise, radiation, and occupational exposures. The review lists methods and data on environmental exposures in 37 European birth cohort studies. Most data is currently available for smoking and SHS (N=37 cohorts), occupational exposures (N=33), outdoor air pollution, and allergens and microbial agents (N=27). Exposure modeling is increasingly used for long-term air pollution exposure assessment; biomonitoring is used for assessment of exposure to metals, POPs and other chemicals; and environmental monitoring for house dust mite exposure assessment. Collaborative analyses with data from several birth cohorts have already been performed successfully for outdoor air pollution, water contamination, allergens, biological contaminants, molds, POPs and SHS. Key success factors for collaborative analyses are common definitions of main exposure and health variables. Our review emphasizes that such common definitions need ideally be arrived at in the study design phase. However, careful comparison of methods used in existing studies also offers excellent opportunities for collaborative analyses. Investigators can use this review to evaluate the potential for future collaborative analyses with respect to data availability and methods used in the different cohorts and to identify potential partners for a specific research question. PMID:23343014

Automation of CT-based haemorrhagic stroke assessment for improved clinical outcomes: study protocol and design.

PubMed

Chinda, Betty; Medvedev, George; Siu, William; Ester, Martin; Arab, Ali; Gu, Tao; Moreno, Sylvain; D'Arcy, Ryan C N; Song, Xiaowei

2018-04-19

Haemorrhagic stroke is of significant healthcare concern due to its association with high mortality and lasting impact on the survivors' quality of life. Treatment decisions and clinical outcomes depend strongly on the size, spread and location of the haematoma. Non-contrast CT (NCCT) is the primary neuroimaging modality for haematoma assessment in haemorrhagic stroke diagnosis. Current procedures do not allow convenient NCCT-based haemorrhage volume calculation in clinical settings, while research-based approaches are yet to be tested for clinical utility; there is a demonstrated need for developing effective solutions. The project under review investigates the development of an automatic NCCT-based haematoma computation tool in support of accurate quantification of haematoma volumes. Several existing research methods for haematoma volume estimation are studied. Selected methods are tested using NCCT images of patients diagnosed with acute haemorrhagic stroke. For inter-rater and intrarater reliability evaluation, different raters will analyse haemorrhage volumes independently. The efficiency with respect to time of haematoma volume assessments will be examined to compare with the results from routine clinical evaluations and planimetry assessment that are known to be more accurate. The project will target the development of an enhanced solution by adapting existing methods and integrating machine learning algorithms. NCCT-based information of brain haemorrhage (eg, size, volume, location) and other relevant information (eg, age, sex, risk factor, comorbidities) will be used in relation to clinical outcomes with future project development. Validity and reliability of the solution will be examined for potential clinical utility. The project including procedures for deidentification of NCCT data has been ethically approved. The study involves secondary use of existing data and does not require new consent of participation. The team consists of clinical neuroimaging scientists, computing scientists and clinical professionals in neurology and neuroradiology and includes patient representatives. Research outputs will be disseminated following knowledge translation plans towards improving stroke patient care. Significant findings will be published in scientific journals. Anticipated deliverables include computer solutions for improved clinical assessment of haematoma using NCCT. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

DNA barcoding a nightmare taxon: assessing barcode index numbers and barcode gaps for sweat bees.

PubMed

Gibbs, Jason

2018-01-01

There is an ongoing campaign to DNA barcode the world's >20 000 bee species. Recent revisions of Lasioglossum (Dialictus) (Hymenoptera: Halictidae) for Canada and the eastern United States were completed using integrative taxonomy. DNA barcode data from 110 species of L. (Dialictus) are examined for their value in identification and discovering additional taxonomic diversity. Specimen identification success was estimated using the best close match method. Error rates were 20% relative to current taxonomic understanding. Barcode Index Numbers (BINs) assigned using Refined Single Linkage Analysis (RESL) and barcode gaps using the Automatic Barcode Gap Discovery (ABGD) method were also assessed. RESL was incongruent for 44.5% of species, although some cryptic diversity may exist. Forty-three of 110 species were part of merged BINs with multiple species. The barcode gap is non-existent for the data set as a whole and ABGD showed levels of discordance similar to the RESL. The viridatum species-group is particularly problematic, so that DNA barcodes alone would be misleading for species delimitation and specimen identification. Character-based methods using fixed nucleotide substitutions could improve specimen identification success in some cases. The use of DNA barcoding for species discovery for standard taxonomic practice in the absence of a well-defined barcode gap is discussed.

Assessment of sedimentary Cu availability: A comparison of biomimetic and AVS approaches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Z.; Mayer, L.M.

1999-02-15

Sedimentary Cu bioavailability during deposit feeding is determined by both the digestive physiology of the organisms and the geochemistry of the sediments. The authors assessed the contribution of these two factors by using a biomimetic approach involving extraction of Cu with digestive fluids of two deposit feeders and one suspension feeder and a geochemical approach measuring Cu associated with acid-volatile sulfide (AVS) in sediments. Cu bioavailability determined by the biomimetic method varied among species with varying digestive physiology but all showed a marked increase when SEM{sub Cu}-AVS {ge} 0, corroborating the premise underlying the AVS method in determining sedimentary Cumore » bioavailability. The existence of a positive SEM{sub Cu}-AVS threshold suggests the existence of additional Cu-binding phases or mixed Cu(I)--Cu(II) sulfides in sediments. In addition, Cu bioavailable to digestive fluids was much less than that measured as SEM{sub Cu}-AVS, indicating that the AVS method overestimates Cu bioavailability to digestive fluid of deposit feeders. Incubation of digestive fluids with two Cu-bound model phases, goethite and sulfide, corroborated the relative unavailability of sulfide-bound Cu. Subsurface deposit feeders feeding on anoxic sediments may be exposed to less Cu than their surface-feeding counterparts in Cu-contaminated environments.« less

How Magnetic Disturbance Influences the Attitude and Heading in Magnetic and Inertial Sensor-Based Orientation Estimation

PubMed Central

Li, Qingguo

2017-01-01

With the advancements in micro-electromechanical systems (MEMS) technologies, magnetic and inertial sensors are becoming more and more accurate, lightweight, smaller in size as well as low-cost, which in turn boosts their applications in human movement analysis. However, challenges still exist in the field of sensor orientation estimation, where magnetic disturbance represents one of the obstacles limiting their practical application. The objective of this paper is to systematically analyze exactly how magnetic disturbances affects the attitude and heading estimation for a magnetic and inertial sensor. First, we reviewed four major components dealing with magnetic disturbance, namely decoupling attitude estimation from magnetic reading, gyro bias estimation, adaptive strategies of compensating magnetic disturbance and sensor fusion algorithms. We review and analyze the features of existing methods of each component. Second, to understand each component in magnetic disturbance rejection, four representative sensor fusion methods were implemented, including gradient descent algorithms, improved explicit complementary filter, dual-linear Kalman filter and extended Kalman filter. Finally, a new standardized testing procedure has been developed to objectively assess the performance of each method against magnetic disturbance. Based upon the testing results, the strength and weakness of the existing sensor fusion methods were easily examined, and suggestions were presented for selecting a proper sensor fusion algorithm or developing new sensor fusion method. PMID:29283432

Controlling the Display of Capsule Endoscopy Video for Diagnostic Assistance

NASA Astrophysics Data System (ADS)

Vu, Hai; Echigo, Tomio; Sagawa, Ryusuke; Yagi, Keiko; Shiba, Masatsugu; Higuchi, Kazuhide; Arakawa, Tetsuo; Yagi, Yasushi

Interpretations by physicians of capsule endoscopy image sequences captured over periods of 7-8 hours usually require 45 to 120 minutes of extreme concentration. This paper describes a novel method to reduce diagnostic time by automatically controlling the display frame rate. Unlike existing techniques, this method displays original images with no skipping of frames. The sequence can be played at a high frame rate in stable regions to save time. Then, in regions with rough changes, the speed is decreased to more conveniently ascertain suspicious findings. To realize such a system, cue information about the disparity of consecutive frames, including color similarity and motion displacements is extracted. A decision tree utilizes these features to classify the states of the image acquisitions. For each classified state, the delay time between frames is calculated by parametric functions. A scheme selecting the optimal parameters set determined from assessments by physicians is deployed. Experiments involved clinical evaluations to investigate the effectiveness of this method compared to a standard-view using an existing system. Results from logged action based analysis show that compared with an existing system the proposed method reduced diagnostic time to around 32.5 ± minutes per full sequence while the number of abnormalities found was similar. As well, physicians needed less effort because of the systems efficient operability. The results of the evaluations should convince physicians that they can safely use this method and obtain reduced diagnostic times.

Somatic coliphages as surrogates for enteroviruses in sludge hygienization treatments.

PubMed

Martín-Díaz, Julia; Casas-Mangas, Raquel; García-Aljaro, Cristina; Blanch, Anicet R; Lucena, Francisco

2016-01-01

Conventional bacterial indicators present serious drawbacks giving information about viral pathogens persistence during sludge hygienization treatments. This calls for the search of alternative viral indicators. Somatic coliphages' (SOMCPH) ability for acting as surrogates for enteroviruses was assessed in 47 sludge samples subjected to novel treatment processes. SOMCPH, infectious enteroviruses and genome copies of enteroviruses were monitored. Only one of these groups, the bacteriophages, was present in the sludge at concentrations that allowed the evaluation of treatment's performance. An indicator/pathogen relationship of 4 log10 (PFU/g dw) was found between SOMCPH and infective enteroviruses and their detection accuracy was assessed. The obtained results and the existence of rapid and standardized methods encourage the inclusion of SOMCPH quantification in future sludge directives. In addition, an existing real-time quantitative polymerase chain reaction (RT-qPCR) for enteroviruses was adapted and applied.

Incorporating Animals in Phenological Assessments: USA National Phenology Network Methods to Observe Animal Phenology

NASA Astrophysics Data System (ADS)

Miller-Rushing, A. J.; Weltzin, J. F.

2009-12-01

Many assessments of phenology, particularly those operating at large scales, focus on the phenology of plants, in part because of the relevance of plants in cycles of leaf greening and browning that are visible from satellite-based remote sensing, and because plants contribute significantly to global and regional biogeochemical cycles. The USA National Phenology Network (USA-NPN), a consortium of individuals, agencies, and organizations, promotes integrated assessments of both plant and animal phenology. The network is currently developing standard methods to add animal phenology to existing assessments of plant phenology. The first phase will of the standard methods will be implemented online in spring 2010. The methods for observing animals will be similar to the standard methods for making on-the-ground observations of plants—observers will be asked to monitor a fixed location regularly throughout the year. During each visit, observers will answer a series of “yes-no” questions that address the phenological state of the species of interest: Is the species present? Is it mating? Is it feeding? And so on. We are currently testing this method in several national parks in the northeastern United States, including Acadia National Park and the Appalachian Trail. By collecting new observations of this sort for a range of animals—amphibians, birds, fish, insects, mammals, and reptiles—we will greatly increase the ability of scientists and natural resource managers to understand how temporal relationships among these species and the plants on which they depend may be changing. To bolster the data available, we are collaborating with existing monitoring programs to develop common monitoring techniques, data sharing technologies, and visualizations. We are also beginning to collect legacy datasets, such as one from North American Bird Phenology Program that includes 90 years of observations of bird migration times from across the continent. We believe that increasing the amount of animal phenology data available for scientists, natural resource managers, and educators, will greatly advance our understanding of phenological changes and their causes and consequences, particularly in this time of rapid environmental change.

Development of a quality instrument for assessing the spontaneous reports of ADR/ADE using Delphi method in China.

PubMed

Chen, Lixun; Jiang, Ling; Shen, Aizong; Wei, Wei

2016-09-01

The frequently low quality of submitted spontaneous reports is of an increasing concern; to our knowledge, no validated instrument exists for assessing case reports' quality comprehensively enough. This work was conducted to develop such a quality instrument for assessing the spontaneous reports of adverse drug reaction (ADR)/adverse drug event (ADE) in China. Initial evaluation indicators were generated using systematic and literature data analysis. Final indicators and their weights were identified using Delphi method. The final quality instrument was developed by adopting the synthetic scoring method. A consensus was reached after four rounds of Delphi survey. The developed quality instrument consisted of 6 first-rank indicators, 18 second-rank indicators, and 115 third-rank indicators, and each rank indicator has been weighted. It evaluates the quality of spontaneous reports of ADR/ADE comprehensively and quantitatively on six parameters: authenticity, duplication, regulatory, completeness, vigilance level, and reporting time frame. The developed instrument was tested with good reliability and validity, which can be used to comprehensively and quantitatively assess the submitted spontaneous reports of ADR/ADE in China.

Assessing ergonomic risks of software: Development of the SEAT.

PubMed

Peres, S Camille; Mehta, Ranjana K; Ritchey, Paul

2017-03-01

Software utilizing interaction designs that require extensive dragging or clicking of icons may increase users' risks for upper extremity cumulative trauma disorders. The purpose of this research is to develop a Self-report Ergonomic Assessment Tool (SEAT) for assessing the risks of software interaction designs and facilitate mitigation of those risks. A 28-item self-report measure was developed by combining and modifying items from existing industrial ergonomic tools. Data were collected from 166 participants after they completed four different tasks that varied by method of input (touch or keyboard and mouse) and type of task (selecting or typing). Principal component analysis found distinct factors associated with stress (i.e., demands) and strain (i.e., response). Repeated measures analyses of variance showed that participants could discriminate the different strain induced by the input methods and tasks. However, participants' ability to discriminate between the stressors associated with that strain was mixed. Further validation of the SEAT is necessary but these results indicate that the SEAT may be a viable method of assessing ergonomics risks presented by software design. Copyright © 2016 Elsevier Ltd. All rights reserved.

Why Measure Outcomes?

PubMed

Kuhn, John E

2016-01-01

The concept of measuring the outcomes of treatment in health care was promoted by Ernest Amory Codman in the early 1900s, but, until recently, his ideas were generally ignored. The forces that have advanced outcome measurement to the forefront of health care include the shift in payers for health care from the patient to large insurance companies or government agencies, the movement toward assessing the care of populations not individuals, and the effort to find value (or cost-effective treatments) amid rising healthcare costs. No ideal method exists to measure outcomes, and the information gathered depends on the reason the outcome information is required. Outcome measures used in research are best able to answer research questions. The methods for assessing physician and hospital performance include process measures, patient-experience measures, structure measures, and measures used to assess the outcomes of treatment. The methods used to assess performance should be validated, be reliable, and reflect a patient's perception of the treatment results. The healthcare industry must measure outcomes to identify which treatments are most effective and provide the most benefit to patients.

Ensemble framework based real-time respiratory motion prediction for adaptive radiotherapy applications.

PubMed

Tatinati, Sivanagaraja; Nazarpour, Kianoush; Tech Ang, Wei; Veluvolu, Kalyana C

2016-08-01

Successful treatment of tumors with motion-adaptive radiotherapy requires accurate prediction of respiratory motion, ideally with a prediction horizon larger than the latency in radiotherapy system. Accurate prediction of respiratory motion is however a non-trivial task due to the presence of irregularities and intra-trace variabilities, such as baseline drift and temporal changes in fundamental frequency pattern. In this paper, to enhance the accuracy of the respiratory motion prediction, we propose a stacked regression ensemble framework that integrates heterogeneous respiratory motion prediction algorithms. We further address two crucial issues for developing a successful ensemble framework: (1) selection of appropriate prediction methods to ensemble (level-0 methods) among the best existing prediction methods; and (2) finding a suitable generalization approach that can successfully exploit the relative advantages of the chosen level-0 methods. The efficacy of the developed ensemble framework is assessed with real respiratory motion traces acquired from 31 patients undergoing treatment. Results show that the developed ensemble framework improves the prediction performance significantly compared to the best existing methods. Copyright © 2016 IPEM. Published by Elsevier Ltd. All rights reserved.

Hot-stage microscopy for determination of API particles in a formulated tablet.

PubMed

Simek, Michal; Grünwaldová, Veronika; Kratochvíl, Bohumil

2014-01-01

Although methods exist to readily determine the particle size distribution (PSD) of an active pharmaceutical ingredient (API) before its formulation into a final product, the primary challenge is to develop a method to determine the PSD of APIs in a finished tablet. To address the limitations of existing PSD methods, we used hot-stage microscopy to observe tablet disintegration during temperature change and, thus, reveal the API particles in a tablet. Both mechanical and liquid disintegration were evaluated after we had identified optimum milling time for mechanical disintegration and optimum volume of water for liquid disintegration. In each case, hot-stage micrographs, taken before and after the API melting point, were compared with image analysis software to obtain the PSDs. Then, the PSDs of the APIs from the disintegrated tablets were compared with the PSDs of raw APIs. Good agreement was obtained, thereby confirming the robustness of our methodology. The availability of such a method equips pharmaceutical scientists with an in vitro assessment method that will more reliably determine the PSD of active substances in finished tablets.

Assessing Consumer Responses to PREPs: A Review of Tobacco Industry and Independent Research Methods

PubMed Central

Rees, Vaughan W.; Kreslake, Jennifer M.; Cummings, K. Michael; O'Connor, Richard J.; Hatsukami, Dorothy K.; Parascandola, Mark; Shields, Peter G.; Connolly, Gregory N.

2009-01-01

Objective Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing CR, and consider how these methods might be applied to evaluate PREPs and new products. Methods Internal industry research reviewed included published papers, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Results Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. Conclusions A model which conceptualizes consumer response as comprising the separate, but interacting domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model, and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of PREPs and new products, to counteract tobacco industry influence on consumers, and enhance the public health. PMID:19959675

Cost-Effectiveness of HBV and HCV Screening Strategies – A Systematic Review of Existing Modelling Techniques

PubMed Central

Geue, Claudia; Wu, Olivia; Xin, Yiqiao; Heggie, Robert; Hutchinson, Sharon; Martin, Natasha K.; Fenwick, Elisabeth; Goldberg, David

2015-01-01

Introduction Studies evaluating the cost-effectiveness of screening for Hepatitis B Virus (HBV) and Hepatitis C Virus (HCV) are generally heterogeneous in terms of risk groups, settings, screening intervention, outcomes and the economic modelling framework. It is therefore difficult to compare cost-effectiveness results between studies. This systematic review aims to summarise and critically assess existing economic models for HBV and HCV in order to identify the main methodological differences in modelling approaches. Methods A structured search strategy was developed and a systematic review carried out. A critical assessment of the decision-analytic models was carried out according to the guidelines and framework developed for assessment of decision-analytic models in Health Technology Assessment of health care interventions. Results The overall approach to analysing the cost-effectiveness of screening strategies was found to be broadly consistent for HBV and HCV. However, modelling parameters and related structure differed between models, producing different results. More recent publications performed better against a performance matrix, evaluating model components and methodology. Conclusion When assessing screening strategies for HBV and HCV infection, the focus should be on more recent studies, which applied the latest treatment regimes, test methods and had better and more complete data on which to base their models. In addition to parameter selection and associated assumptions, careful consideration of dynamic versus static modelling is recommended. Future research may want to focus on these methodological issues. In addition, the ability to evaluate screening strategies for multiple infectious diseases, (HCV and HIV at the same time) might prove important for decision makers. PMID:26689908

Ecotoxicity testing of chemicals with particular reference to pesticides.

PubMed

Walker, Colin H

2006-07-01

Ecotoxicity tests are performed on vertebrates and invertebrates for the environmental risk assessment of pesticides and other chemicals and for a variety of ecotoxicological studies in the laboratory and in the field. Existing practices and strategies in ecotoxicity testing are reviewed, including an account of current requirements of the European Commission for the testing of pesticides and the recent REACH (Registration, Evaluation, Authorisation and Restrictions of Chemicals) proposals for industrial chemicals. Criticisms of existing practices have been made on both scientific and ethical grounds, and these are considered before dealing with the question of possible alternative methods and strategies both for environmental risk assessment and for ecotoxicological studies more generally. New approaches from an ecological point of view are compared with recent developments in laboratory-based methods such as toxicity tests, biomarker assays and bioassays. With regard to the development of new strategies for risk assessment, it is suggested that full consideration should be given to the findings of earlier long-term studies of pollution, which identified mechanisms of action by which environmental chemicals can cause natural populations to decline. Neurotoxicity and endocrine disruption are two cases in point, and biomarker assays for them could have an important role in testing new chemicals suspected of having these properties. In a concluding discussion, possible ways of improving testing protocols are discussed, having regard for current issues in the field of environmental risk assessment as exemplified by the debate over the REACH proposals. The importance of flexibility and the roles of ecologists and ecotoxicologists are stressed in the context of environmental risk assessment.

Assessment of Growth Using Mandibular Canine Calcification Stages and Its Correlation with Modified MP3 Stages

PubMed Central

Nayak, US Krishna; Hegde, Gautam

2010-01-01

Background and objectives Orthodontic diagnosis and treatment planning for growing children must involve growth prediction, especially in the treatment of skeletal problems. Studies have shown that a strong association exists between skeletal maturity and dental calcification stages. The present study was therefore taken up to provide a simple and practical method for assessing skeletal maturity using a dental periapical film and standard dental X-ray machine, to compare the developmental stages of the mandibular canine with that of developmental stages of modified MP3 and to find out if any correlation exists, to determine if the developmental stages of the mandibular canine alone can be used as a reliable indicator for assessment of skeletal maturity. Methods A total of 160 periapical radiographs (80 males and 80 females), of the mandibular right canine and the MP3 region was taken and assessed according to the Dermirjian’s stages of dental calcification and the modified MP3 stages. Results The correlation between the developmental stages of MP3 and the mandibular right canine in male and female groups, is of high statistical significance (p = 0.001). The correlation coefficient between MP3 stages and developmental stages of mandibular canine and chronological age in male and females was found to be not significant. Conclusions The correlation between the mandibular canine calcification stages and MP3 stages was found to be significant. The developmental stages of the mandibular canine could be used very reliably as a sole indicator for assessment of skeletal maturity. PMID:27625553

A new system for assessment of growth using mandibular canine calcification stages and its correlation with modified MP3 stages

PubMed Central

Hegde, Gautham; Hegde, Nanditha; Kumar, Anil; Keshavaraj

2014-01-01

Objective: Orthodontic diagnosis and treatment planning for growing children must involve growth prediction, especially in the treatment of skeletal problems. Studies have shown that a strong association exists between skeletal maturity and dental calcification stages. The present study was therefore taken up to provide a simple and practical method for assessing skeletal maturity using a dental periapical film and standard dental X-ray machine, to compare the developmental stages of the mandibular canine with that of developmental stages of modified MP3 and to find out if any correlation exists, to determine if the developmental stages of the mandibular canine alone can be used as a reliable indicator for assessment of skeletal maturity. Materials and Methods: A total of 160 periapical radiographs, of the mandibular right canine and the MP3 region was taken and assessed according to the Dermirjian's stages of dental calcification and the modified MP3 stages. Results and Discussion: The correlation coefficient between MP3 stages and developmental stages of mandibular canine was found to be significant in both male and female groups. When the canine calcification stages were compared with the MP3 stages it was found that with the exception of the D stage of canine calcification the remaining stages showed a very high correlation with the modified MP3 stages. Conclusion: The correlation between the mandibular canine calcification stages, and the MP3 stages was found to be significant. The canine calcification could be used as a sole indicator for assessment of skeletal maturity. PMID:25210386

Measurement tools and process indicators of patient safety culture in primary care. A mixed methods study by the LINNEAUS collaboration on patient safety in primary care

PubMed Central

Parker, Dianne; Wensing, Michel; Esmail, Aneez; Valderas, Jose M

2015-01-01

ABSTRACT Background: There is little guidance available to healthcare practitioners about what tools they might use to assess the patient safety culture. Objective: To identify useful tools for assessing patient safety culture in primary care organizations in Europe; to identify those aspects of performance that should be assessed when investigating the relationship between safety culture and performance in primary care. Methods: Two consensus-based studies were carried out, in which subject matter experts and primary healthcare professionals from several EU states rated (a) the applicability to their healthcare system of several existing safety culture assessment tools and (b) the appropriateness and usefulness of a range of potential indicators of a positive patient safety culture to primary care settings. The safety culture tools were field-tested in four countries to ascertain any challenges and issues arising when used in primary care. Results: The two existing tools that received the most favourable ratings were the Manchester patient safety framework (MaPsAF primary care version) and the Agency for healthcare research and quality survey (medical office version). Several potential safety culture process indicators were identified. The one that emerged as offering the best combination of appropriateness and usefulness related to the collection of data on adverse patient events. Conclusion: Two tools, one quantitative and one qualitative, were identified as applicable and useful in assessing patient safety culture in primary care settings in Europe. Safety culture indicators in primary care should focus on the processes rather than the outcomes of care. PMID:26339832

Determination of laser cutting process conditions using the preference selection index method

NASA Astrophysics Data System (ADS)

Madić, Miloš; Antucheviciene, Jurgita; Radovanović, Miroslav; Petković, Dušan

2017-03-01

Determination of adequate parameter settings for improvement of multiple quality and productivity characteristics at the same time is of great practical importance in laser cutting. This paper discusses the application of the preference selection index (PSI) method for discrete optimization of the CO2 laser cutting of stainless steel. The main motivation for application of the PSI method is that it represents an almost unexplored multi-criteria decision making (MCDM) method, and moreover, this method does not require assessment of the considered criteria relative significances. After reviewing and comparing the existing approaches for determination of laser cutting parameter settings, the application of the PSI method was explained in detail. Experiment realization was conducted by using Taguchi's L27 orthogonal array. Roughness of the cut surface, heat affected zone (HAZ), kerf width and material removal rate (MRR) were considered as optimization criteria. The proposed methodology is found to be very useful in real manufacturing environment since it involves simple calculations which are easy to understand and implement. However, while applying the PSI method it was observed that it can not be useful in situations where there exist a large number of alternatives which have attribute values (performances) very close to those which are preferred.

Reinforcement learning for resource allocation in LEO satellite networks.

PubMed

Usaha, Wipawee; Barria, Javier A

2007-06-01

In this paper, we develop and assess online decision-making algorithms for call admission and routing for low Earth orbit (LEO) satellite networks. It has been shown in a recent paper that, in a LEO satellite system, a semi-Markov decision process formulation of the call admission and routing problem can achieve better performance in terms of an average revenue function than existing routing methods. However, the conventional dynamic programming (DP) numerical solution becomes prohibited as the problem size increases. In this paper, two solution methods based on reinforcement learning (RL) are proposed in order to circumvent the computational burden of DP. The first method is based on an actor-critic method with temporal-difference (TD) learning. The second method is based on a critic-only method, called optimistic TD learning. The algorithms enhance performance in terms of requirements in storage, computational complexity and computational time, and in terms of an overall long-term average revenue function that penalizes blocked calls. Numerical studies are carried out, and the results obtained show that the RL framework can achieve up to 56% higher average revenue over existing routing methods used in LEO satellite networks with reasonable storage and computational requirements.

Plans for Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Heeg, Jennifer; Ballmann, Josef; Bhatia, Kumar; Blades, Eric; Boucke, Alexander; Chwalowski, Pawel; Dietz, Guido; Dowell, Earl; Florance, Jennifer P.; Hansen, Thorsten;

Assessing the Expected Value of Research Studies in Reducing Uncertainty and Improving Implementation Dynamics.

PubMed

Grimm, Sabine E; Dixon, Simon; Stevens, John W

2017-07-01

With low implementation of cost-effective health technologies being a problem in many health systems, it is worth considering the potential effects of research on implementation at the time of health technology assessment. Meaningful and realistic implementation estimates must be of dynamic nature. To extend existing methods for assessing the value of research studies in terms of both reduction of uncertainty and improvement in implementation by considering diffusion based on expert beliefs with and without further research conditional on the strength of evidence. We use expected value of sample information and expected value of specific implementation measure concepts accounting for the effects of specific research studies on implementation and the reduction of uncertainty. Diffusion theory and elicitation of expert beliefs about the shape of diffusion curves inform implementation dynamics. We illustrate use of the resulting dynamic expected value of research in a preterm birth screening technology and results are compared with those from a static analysis. Allowing for diffusion based on expert beliefs had a significant impact on the expected value of research in the case study, suggesting that mistakes are made where static implementation levels are assumed. Incorporating the effects of research on implementation resulted in an increase in the expected value of research compared to the expected value of sample information alone. Assessing the expected value of research in reducing uncertainty and improving implementation dynamics has the potential to complement currently used analyses in health technology assessments, especially in recommendations for further research. The combination of expected value of research, diffusion theory, and elicitation described in this article is an important addition to the existing methods of health technology assessment.

HEALTH TECHNOLOGY ASSESSMENT OF MEDICAL DEVICES IN EUROPE: PROCESSES, PRACTICES, AND METHODS.

PubMed

Fuchs, Sabine; Olberg, Britta; Panteli, Dimitra; Busse, Reinhard

2016-01-01

To review and compare current Health Technology Assessment (HTA) activities for medical devices (MDs) across European HTA institutions. A comprehensive approach was adopted to identify institutions involved in HTA in European countries. We systematically searched institutional Web sites and other online sources by using a structured tool to extract information on the role and link to decision making, structure, scope, process, methodological approach, and available HTA reports for each included institution. Information was obtained from eighty-four institutions, forty-seven of which were analyzed. Fifty-four methodological documents from twenty-three agencies in eighteen countries were identified. Only five agencies had separate documents for the assessment of MDs. A few agencies made separate provisions for the assessment of MDs in their general methods. The amount of publicly available HTA reports on MDs varied by device category and agency remit. Despite growing consensus on their importance and international initiatives, such as the EUnetHTA Core Model®, specific tools for the assessment of MDs are rarely developed and implemented at the national level. Separate additional signposts incorporated in existing general methods guides may be sufficient for the evaluation of MDs.

A protocol for lifetime energy and environmental impact assessment of building insulation materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shrestha, Som S., E-mail: shresthass@ornl.gov; Biswas, Kaushik; Desjarlais, Andre O.

This article describes a proposed protocol that is intended to provide a comprehensive list of factors to be considered in evaluating the direct and indirect environmental impacts of building insulation materials, as well as detailed descriptions of standardized calculation methodologies to determine those impacts. The energy and environmental impacts of insulation materials can generally be divided into two categories: (1) direct impact due to the embodied energy of the insulation materials and other factors and (2) indirect or environmental impacts avoided as a result of reduced building energy use due to addition of insulation. Standards and product category rules exist,more » which provide guidelines about the life cycle assessment (LCA) of materials, including building insulation products. However, critical reviews have suggested that these standards fail to provide complete guidance to LCA studies and suffer from ambiguities regarding the determination of the environmental impacts of building insulation and other products. The focus of the assessment protocol described here is to identify all factors that contribute to the total energy and environmental impacts of different building insulation products and, more importantly, provide standardized determination methods that will allow comparison of different insulation material types. Further, the intent is not to replace current LCA standards but to provide a well-defined, easy-to-use comparison method for insulation materials using existing LCA guidelines. - Highlights: • We proposed a protocol to evaluate the environmental impacts of insulation materials. • The protocol considers all life cycle stages of an insulation material. • Both the direct environmental impacts and the indirect impacts are defined. • Standardized calculation methods for the ‘avoided operational energy’ is defined. • Standardized calculation methods for the ‘avoided environmental impact’ is defined.« less

Use of a modified GreenScreen tool to conduct a screening-level comparative hazard assessment of conventional silver and two forms of nanosilver.

PubMed

Sass, Jennifer; Heine, Lauren; Hwang, Nina

2016-11-08

Increased concern for potential health and environmental impacts of chemicals, including nanomaterials, in consumer products is driving demand for greater transparency regarding potential risks. Chemical hazard assessment is a powerful tool to inform product design, development and procurement and has been integrated into alternative assessment frameworks. The extent to which assessment methods originally designed for conventionally-sized materials can be used for nanomaterials, which have size-dependent physical and chemical properties, have not been well established. We contracted with a certified GreenScreen profiler to conduct three GreenScreen hazard assessments, for conventional silver and two forms of nanosilver. The contractor summarized publicly available literature, and used defined GreenScreen hazard criteria and expert judgment to assign and report hazard classification levels, along with indications of confidence in those assignments. Where data were not available, a data gap (DG) was assigned. Using the individual endpoint scores, an aggregated benchmark score (BM) was applied. Conventional silver and low-soluble nanosilver were assigned the highest possible hazard score and a silica-silver nanocomposite called AGS-20 could not be scored due to data gaps. AGS-20 is approved for use as antimicrobials by the US Environmental Protection Agency. An existing method for chemical hazard assessment and communication can be used - with minor adaptations- to compare hazards across conventional and nano forms of a substance. The differences in data gaps and in hazard profiles support the argument that each silver form should be considered unique and subjected to hazard assessment to inform regulatory decisions and decisions about product design and development. A critical limitation of hazard assessments for nanomaterials is the lack of nano-specific hazard data - where data are available, we demonstrate that existing hazard assessment systems can work. The work is relevant for risk assessors and regulators. We recommend that regulatory agencies and others require more robust data sets on each novel nanomaterial before granting market approval.

Comparative Study on Code-based Linear Evaluation of an Existing RC Building Damaged during 1998 Adana-Ceyhan Earthquake

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toprak, A. Emre; Guelay, F. Guelten; Ruge, Peter

2008-07-08

Determination of seismic performance of existing buildings has become one of the key concepts in structural analysis topics after recent earthquakes (i.e. Izmit and Duzce Earthquakes in 1999, Kobe Earthquake in 1995 and Northridge Earthquake in 1994). Considering the need for precise assessment tools to determine seismic performance level, most of earthquake hazardous countries try to include performance based assessment in their seismic codes. Recently, Turkish Earthquake Code 2007 (TEC'07), which was put into effect in March 2007, also introduced linear and non-linear assessment procedures to be applied prior to building retrofitting. In this paper, a comparative study is performedmore » on the code-based seismic assessment of RC buildings with linear static methods of analysis, selecting an existing RC building. The basic principles dealing the procedure of seismic performance evaluations for existing RC buildings according to Eurocode 8 and TEC'07 will be outlined and compared. Then the procedure is applied to a real case study building is selected which is exposed to 1998 Adana-Ceyhan Earthquake in Turkey, the seismic action of Ms = 6.3 with a maximum ground acceleration of 0.28 g It is a six-storey RC residential building with a total of 14.65 m height, composed of orthogonal frames, symmetrical in y direction and it does not have any significant structural irregularities. The rectangular shaped planar dimensions are 16.40 mx7.80 m = 127.90 m{sup 2} with five spans in x and two spans in y directions. It was reported that the building had been moderately damaged during the 1998 earthquake and retrofitting process was suggested by the authorities with adding shear-walls to the system. The computations show that the performing methods of analysis with linear approaches using either Eurocode 8 or TEC'07 independently produce similar performance levels of collapse for the critical storey of the structure. The computed base shear value according to Eurocode is much higher than the requirements of the Turkish Earthquake Code while the selected ground conditions represent the same characteristics. The main reason is that the ordinate of the horizontal elastic response spectrum for Eurocode 8 is increased by the soil factor. In TEC'07 force-based linear assessment, the seismic demands at cross-sections are to be checked with residual moment capacities; however, the chord rotations of primary ductile elements must be checked for Eurocode safety verifications. On the other hand, the demand curvatures from linear methods of analysis of Eurocode 8 together with TEC'07 are almost similar.« less

Premium cost optimization of operational and maintenance of green building in Indonesia using life cycle assessment method

NASA Astrophysics Data System (ADS)

Latief, Yusuf; Berawi, Mohammed Ali; Basten, Van; Budiman, Rachmat; Riswanto

2017-06-01

Building has a big impact on the environmental developments. There are three general motives in building, namely the economy, society, and environment. Total completed building construction in Indonesia increased by 116% during 2009 to 2011. It made the energy consumption increased by 11% within the last three years. In fact, 70% of energy consumption is used for electricity needs on commercial buildings which leads to an increase of greenhouse gas emissions by 25%. Green Building cycle costs is known as highly building upfront cost in Indonesia. The purpose of optimization in this research improves building performance with some of green concept alternatives. Research methodology is mixed method of qualitative and quantitative approaches through questionnaire surveys and case study. Assessing the successful of optimization functions in the existing green building is based on the operational and maintenance phase with the Life Cycle Assessment Method. Choosing optimization results were based on the largest efficiency of building life cycle and the most effective cost to refund.

Fan Noise Prediction with Applications to Aircraft System Noise Assessment

NASA Technical Reports Server (NTRS)

Nark, Douglas M.; Envia, Edmane; Burley, Casey L.

2009-01-01

This paper describes an assessment of current fan noise prediction tools by comparing measured and predicted sideline acoustic levels from a benchmark fan noise wind tunnel test. Specifically, an empirical method and newly developed coupled computational approach are utilized to predict aft fan noise for a benchmark test configuration. Comparisons with sideline noise measurements are performed to assess the relative merits of the two approaches. The study identifies issues entailed in coupling the source and propagation codes, as well as provides insight into the capabilities of the tools in predicting the fan noise source and subsequent propagation and radiation. In contrast to the empirical method, the new coupled computational approach provides the ability to investigate acoustic near-field effects. The potential benefits/costs of these new methods are also compared with the existing capabilities in a current aircraft noise system prediction tool. The knowledge gained in this work provides a basis for improved fan source specification in overall aircraft system noise studies.

Chapter 8: US geological survey Circum-Arctic Resource Appraisal (CARA): Introduction and summary of organization and methods

USGS Publications Warehouse

Charpentier, R.R.; Gautier, D.L.

2011-01-01

The USGS has assessed undiscovered petroleum resources in the Arctic through geological mapping, basin analysis and quantitative assessment. The new map compilation provided the base from which geologists subdivided the Arctic for burial history modelling and quantitative assessment. The CARA was a probabilistic, geologically based study that used existing USGS methodology, modified somewhat for the circumstances of the Arctic. The assessment relied heavily on analogue modelling, with numerical input as lognormal distributions of sizes and numbers of undiscovered accumulations. Probabilistic results for individual assessment units were statistically aggregated taking geological dependencies into account. Fourteen papers in this Geological Society volume present summaries of various aspects of the CARA. ?? 2011 The Geological Society of London.

Evaluation of machine learning algorithms for improved risk assessment for Down's syndrome.

PubMed

Koivu, Aki; Korpimäki, Teemu; Kivelä, Petri; Pahikkala, Tapio; Sairanen, Mikko

2018-05-04

Prenatal screening generates a great amount of data that is used for predicting risk of various disorders. Prenatal risk assessment is based on multiple clinical variables and overall performance is defined by how well the risk algorithm is optimized for the population in question. This article evaluates machine learning algorithms to improve performance of first trimester screening of Down syndrome. Machine learning algorithms pose an adaptive alternative to develop better risk assessment models using the existing clinical variables. Two real-world data sets were used to experiment with multiple classification algorithms. Implemented models were tested with a third, real-world, data set and performance was compared to a predicate method, a commercial risk assessment software. Best performing deep neural network model gave an area under the curve of 0.96 and detection rate of 78% with 1% false positive rate with the test data. Support vector machine model gave area under the curve of 0.95 and detection rate of 61% with 1% false positive rate with the same test data. When compared with the predicate method, the best support vector machine model was slightly inferior, but an optimized deep neural network model was able to give higher detection rates with same false positive rate or similar detection rate but with markedly lower false positive rate. This finding could further improve the first trimester screening for Down syndrome, by using existing clinical variables and a large training data derived from a specific population. Copyright © 2018 Elsevier Ltd. All rights reserved.

Neck pain assessment in a virtual environment.

PubMed

Sarig-Bahat, Hilla; Weiss, Patrice L Tamar; Laufer, Yocheved

2010-02-15

Neck-pain and control group comparative analysis of conventional and virtual reality (VR)-based assessment of cervical range of motion (CROM). To use a tracker-based VR system to compare CROM of individuals suffering from chronic neck pain with CROM of asymptomatic individuals; to compare VR system results with those obtained during conventional assessment; to present the diagnostic value of CROM measures obtained by both assessments; and to demonstrate the effect of a single VR session on CROM. Neck pain is a common musculoskeletal complaint with a reported annual prevalence of 30% to 50%. In the absence of a gold standard for CROM assessment, a variety of assessment devices and methodologies exist. Common to these methodologies, assessment of CROM is carried out by instructing subjects to move their head as far as possible. However, these elicited movements do not necessarily replicate functional movements which occur spontaneously in response to multiple stimuli. To achieve a more functional approach to cervical motion assessment, we have recently developed a VR environment in which electromagnetic tracking is used to monitor cervical motion while participants are involved in a simple yet engaging gaming scenario. CROM measures were collected from 25 symptomatic and 42 asymptomatic individuals using VR and conventional assessments. Analysis of variance was used to determine differences between groups and assessment methods. Logistic regression analysis, using a single predictor, compared the diagnostic ability of both methods. Results obtained by both methods demonstrated significant CROM limitations in the symptomatic group. The VR measures showed greater CROM and sensitivity while conventional measures showed greater specificity. A single session exposure to VR resulted in a significant increase in CROM. Neck pain is significantly associated with reduced CROM as demonstrated by both VR and conventional assessment methods. The VR method provides assessment of functional CROM and can be used for CROM enhancement. Assessment by VR has greater sensitivity than conventional assessment and can be used for the detection of true symptomatic individuals.

Towards life cycle sustainability assessent of cities. A review of background knowledge.

PubMed

Albertí, Jaume; Balaguera, Alejandra; Brodhag, Christian; Fullana-I-Palmer, Pere

2017-12-31

This article analyses whether existing LCA and sustainability methods can be used in the assessment of a city or an urban region. The approach is performed through the review of current existing LCA-based and sustainability standards and guidelines. A focus is put into those LCA-based standards specially designed for the built environment. Moreover, a review of non-LCA based standards, indices and guides for the assessment of the sustainability of countries, cities or urban regions is done. The purpose is to check if these assessment tools can provide good results in the absence of LCA-based assessments for cities and urban regions. This review demonstrates the lack of consensus in the definition of both, the city and its boundaries, which hinders the development of useful sustainability standards. Furthermore, it is concluded that current sustainability assessment tools miss, at least, one of these aspects: (i) holistic point of view, (ii) focus on various environmental impacts, (iii) a Life Cycle (LC) perspective, and (iv) the possibility to compare the results among different cities or urban regions. From the LCA perspective, the deficiencies found also include the need for a definition of the function, functional unit (FU), and reference flow (RF) of neighbourhoods, cities, and urban regions. Copyright © 2017 Elsevier B.V. All rights reserved.

Development of Instrumental Techniques for Color Assessment of Camouflage Patterns

ERIC Educational Resources Information Center

Fang, Gang

2012-01-01

Camouflage fabrics are produced on a large scale for use in the US military and other applications. One of the highest volume camouflage fabrics is known as the Universal Camouflage Pattern (UCP) which is produced for the US Department of Defense. At present, no standard measurement-based color quality control method exists for camouflage…

Using Drawing Technology to Assess Students' Visualizations of Chemical Reaction Processes

ERIC Educational Resources Information Center

Chang, Hsin-Yi; Quintana, Chris; Krajcik, Joseph

2014-01-01

In this study, we investigated how students used a drawing tool to visualize their ideas of chemical reaction processes. We interviewed 30 students using thinking-aloud and retrospective methods and provided them with a drawing tool. We identified four types of connections the students made as they used the tool: drawing on existing knowledge,…

A Mixed-Method Approach to the Assessment of Teachers' Emotions: Development and Validation of the Teacher Emotion Questionnaire

ERIC Educational Resources Information Center

Buric, Irena; Sliškovic, Ana; Macuka, Ivana

2018-01-01

Existing research indicates that emotions are integral components of teachers' jobs and lives, but knowledge regarding functional relations between teachers' emotions, their antecedents and their effects on teachers, teaching and students is still quite scarce. One possible reason for this knowledge gap is the lack of adequate operationalisation…

Findings from the 2012 West Virginia Online Writing Scoring Comparability Study

ERIC Educational Resources Information Center

Hixson, Nate; Rhudy, Vaughn

2013-01-01

Student responses to the West Virginia Educational Standards Test (WESTEST) 2 Online Writing Assessment are scored by a computer-scoring engine. The scoring method is not widely understood among educators, and there exists a misperception that it is not comparable to hand scoring. To address these issues, the West Virginia Department of Education…

Developing a Diagnosis System of Work-Related Capabilities for Students: A Computer-Assisted Assessment

ERIC Educational Resources Information Center

Liao, C. H.; Yang, M. H.; Yang, B. C.

2013-01-01

A gap exists between students' employment needs and higher education offerings. Thus, developing the capability to meet the learning needs of students in supporting their future aspirations should be facilitated. To bridge this gap in practice, this study uses multiple methods (i.e., nominal group technique and instructional systems development)…

Optimal Sample Size Determinations for the Heteroscedastic Two One-Sided Tests of Mean Equivalence: Design Schemes and Software Implementations

ERIC Educational Resources Information Center

Jan, Show-Li; Shieh, Gwowen

2017-01-01

Equivalence assessment is becoming an increasingly important topic in many application areas including behavioral and social sciences research. Although there exist more powerful tests, the two one-sided tests (TOST) procedure is a technically transparent and widely accepted method for establishing statistical equivalence. Alternatively, a direct…

Natural and induced variation in tomato fruit: an assessment of substantial equivalence relative to stakeholder acceptable chemical diversity

USDA-ARS?s Scientific Manuscript database

Unintended effects to food quality and composition occur no matter the method of plant improvement. The existence of unintended effects is perhaps not the most important point within the discussion, but rather the identity and significance of the compositional changes observed. Here we report the ex...

The Self Concept.

ERIC Educational Resources Information Center

Fitzgibbon, Ann

The purpose of this paper is to increase awareness of the self concept as a variable, to indicate what is known about the self concept from existing research, to discuss its importance to the school and its effect on learning, and to offer a method of assessment which is tied to a definition arbitrarily made as a starting point for researchers. A…

Fisheries indicators, freshwater

USGS Publications Warehouse

Kwak, Thomas J.

2010-01-01

Freshwater fisheries exist among diverse ecosystems and fauna, provide societal benefits, and are influenced by human activities. Fisheries scientists assess the status and sustainability of fisheries by multiple approaches, including abundance and condition indices, population parameters, community indices, modeling, and surveys of habitat and human dimensions. The future sustainability of freshwater fisheries is limited not by available methods but by society’s will.

Gaps between Knowing and Doing: Understanding and Assessing the Barriers to Optimal Health Care

ERIC Educational Resources Information Center

Cochrane, Lorna J.; Olson, Curtis A.; Murray, Suzanne; Dupuis, Martin; Tooman, Tricia; Hayes, Sean

2007-01-01

Introduction: A significant gap exists between science and clinical practice guidelines, on the one hand, and actual clinical practice, on the other. An in-depth understanding of the barriers and incentives contributing to the gap can lead to interventions that effect change toward optimal practice and thus to better care. Methods: A systematic…

Benchmarking Course Completion Rates: A Method with an Example from the British Columbia Open University

ERIC Educational Resources Information Center

Giguere, Louis

2007-01-01

We report findings on the methodological phase of a research project designed to assess the progress of the British Columbia Open University (BCOU) toward a 1997 goal of increasing distance education course completion rates to British Columbia system levels by adapting existing "off-line" courses for online delivery (a virtualization…

Simultaneous computation of jet turbulence and noise

NASA Technical Reports Server (NTRS)

Berman, C. H.; Ramos, J. I.

1989-01-01

The existing flow computation methods, wave computation techniques, and theories based on noise source models are reviewed in order to assess the capabilities of numerical techniques to compute jet turbulence noise and understand the physical mechanisms governing it over a range of subsonic and supersonic nozzle exit conditions. In particular, attention is given to (1) methods for extrapolating near field information, obtained from flow computations, to the acoustic far field and (2) the numerical solution of the time-dependent Lilley equation.

Developing Best Practices for Capturing As-Built Building Information Models (BIM) for Existing Facilities

DTIC Science & Technology

2010-08-01

students conducting the data capture and data entry, an analytical method known as the Task Load Index ( NASA TLX Version 2.0) was used. This method was...published by the NASA Ames Research Center in December 2003. The entire report can be found at: http://humansystems.arc.nasa.gov/groups/ TLX The...completion of each task in the survey process, surveyors were required to complete a NASA TLX form to report their assessment of the workload for

Electric Power Consumption Coefficients for U.S. Industries: Regional Estimation and Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boero, Riccardo

Economic activity relies on electric power provided by electrical generation, transmission, and distribution systems. This paper presents a method developed at Los Alamos National Laboratory to estimate electric power consumption by different industries in the United States. Results are validated through comparisons with existing literature and benchmarking data sources. We also discuss the limitations and applications of the presented method, such as estimating indirect electric power consumption and assessing the economic impact of power outages based on input-output economic models.

The Costs and Benefits of Compliance with Renewable Portfolio Standards: Reviewing Experience to Date

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heeter, Jenny; Barbose, Galen; Bird, Lori

2014-03-12

More than half of U.S. states have renewable portfolio standards (RPS) in place and have collectively deployed approximately 46,000 MW of new renewable energy capacity through year-end 2012. Most of these policies have five or more years of implementation experience, enabling an assessment of their costs and benefits. Understanding RPS benefits and costs is essential for policymakers evaluating existing RPS policies, assessing the need for modifications, and considering new policies. A key aspect of this study is the comprehensive review of existing RPS cost and benefit estimates, in addition to an examination of the variety of methods used to calculatemore » such estimates. Based on available data and estimates reported by utilities and regulators, this study summarizes RPS costs to date. The study considers how those costs may evolve going forward, given scheduled increases in RPS targets and cost containment mechanisms incorporated into existing policies. The report also summarizes RPS benefits estimates, based on published studies for individual states, and discusses key methodological considerations.« less

Measurement properties of existing clinical assessment methods evaluating scapular positioning and function. A systematic review.

PubMed

Larsen, Camilla Marie; Juul-Kristensen, Birgit; Lund, Hans; Søgaard, Karen

2014-10-01

The aims were to compile a schematic overview of clinical scapular assessment methods and critically appraise the methodological quality of the involved studies. A systematic, computer-assisted literature search using Medline, CINAHL, SportDiscus and EMBASE was performed from inception to October 2013. Reference lists in articles were also screened for publications. From 50 articles, 54 method names were identified and categorized into three groups: (1) Static positioning assessment (n = 19); (2) Semi-dynamic (n = 13); and (3) Dynamic functional assessment (n = 22). Fifteen studies were excluded for evaluation due to no/few clinimetric results, leaving 35 studies for evaluation. Graded according to the COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN checklist), the methodological quality in the reliability and validity domains was "fair" (57%) to "poor" (43%), with only one study rated as "good". The reliability domain was most often investigated. Few of the assessment methods in the included studies that had "fair" or "good" measurement property ratings demonstrated acceptable results for both reliability and validity. We found a substantially larger number of clinical scapular assessment methods than previously reported. Using the COSMIN checklist the methodological quality of the included measurement properties in the reliability and validity domains were in general "fair" to "poor". None were examined for all three domains: (1) reliability; (2) validity; and (3) responsiveness. Observational evaluation systems and assessment of scapular upward rotation seem suitably evidence-based for clinical use. Future studies should test and improve the clinimetric properties, and especially diagnostic accuracy and responsiveness, to increase utility for clinical practice.

New Data Pre-processing on Assessing of Obstructive Sleep Apnea Syndrome: Line Based Normalization Method (LBNM)

NASA Astrophysics Data System (ADS)

Akdemir, Bayram; Güneş, Salih; Yosunkaya, Şebnem

Sleep disorders are a very common unawareness illness among public. Obstructive Sleep Apnea Syndrome (OSAS) is characterized with decreased oxygen saturation level and repetitive upper respiratory tract obstruction episodes during full night sleep. In the present study, we have proposed a novel data normalization method called Line Based Normalization Method (LBNM) to evaluate OSAS using real data set obtained from Polysomnography device as a diagnostic tool in patients and clinically suspected of suffering OSAS. Here, we have combined the LBNM and classification methods comprising C4.5 decision tree classifier and Artificial Neural Network (ANN) to diagnose the OSAS. Firstly, each clinical feature in OSAS dataset is scaled by LBNM method in the range of [0,1]. Secondly, normalized OSAS dataset is classified using different classifier algorithms including C4.5 decision tree classifier and ANN, respectively. The proposed normalization method was compared with min-max normalization, z-score normalization, and decimal scaling methods existing in literature on the diagnosis of OSAS. LBNM has produced very promising results on the assessing of OSAS. Also, this method could be applied to other biomedical datasets.

Assessment of Delirium in Intensive Care Unit Patients: Educational Strategies.

PubMed

Smith, Judith M; Van Aman, M Nancy; Schneiderhahn, Mary Elizabeth; Edelman, Robin; Ercole, Patrick M

2017-05-01

Delirium is an acute brain dysfunction associated with poor outcomes in intensive care unit (ICU) patients. Critical care nurses play an important role in the prevention, detection, and management of delirium, but they must be able to accurately assess for it. The Confusion Assessment Method for the Intensive Care Unit (CAM-ICU) instrument is a reliable and valid method to assess for delirium, but research reveals most nurses need practice to use it proficiently. A pretest-posttest design was used to evaluate the success of a multimodal educational strategy (i.e., online learning module coupled with standardized patient simulation experience) on critical care nurses' knowledge and confidence to assess and manage delirium using the CAM-ICU. Participants (N = 34) showed a significant increase (p < .001) in confidence in their ability to assess and manage delirium following the multimodal education. No statistical change in knowledge of delirium existed following the education. A multimodal educational strategy, which included simulation, significantly added confidence in critical care nurses' performance using the CAM-ICU. J Contin Nurs Educ. 2017;48(5):239-244. Copyright 2017, SLACK Incorporated.

Assessment methods in human body composition.

PubMed

Lee, Seon Yeong; Gallagher, Dympna

2008-09-01

The present study reviews the most recently developed and commonly used methods for the determination of human body composition in vivo with relevance for nutritional assessment. Body composition measurement methods are continuously being perfected with the most commonly used methods being bioelectrical impedance analysis, dilution techniques, air displacement plethysmography, dual energy X-ray absorptiometry, and MRI or magnetic resonance spectroscopy. Recent developments include three-dimensional photonic scanning and quantitative magnetic resonance. Collectively, these techniques allow for the measurement of fat, fat-free mass, bone mineral content, total body water, extracellular water, total adipose tissue and its subdepots (visceral, subcutaneous, and intermuscular), skeletal muscle, select organs, and ectopic fat depots. There is an ongoing need to perfect methods that provide information beyond mass and structure (static measures) to kinetic measures that yield information on metabolic and biological functions. On the basis of the wide range of measurable properties, analytical methods and known body composition models, clinicians and scientists can quantify a number of body components and with longitudinal assessment, can track changes in health and disease with implications for understanding efficacy of nutritional and clinical interventions, diagnosis, prevention, and treatment in clinical settings. With the greater need to understand precursors of health risk beginning in childhood, a gap exists in appropriate in-vivo measurement methods beginning at birth.

Assessment methods in human body composition

PubMed Central

Lee, Seon Yeong; Gallagher, Dympna

2009-01-01

Purpose of review The present study reviews the most recently developed and commonly used methods for the determination of human body composition in vivo with relevance for nutritional assessment. Recent findings Body composition measurement methods are continuously being perfected with the most commonly used methods being bioelectrical impedance analysis, dilution techniques, air displacement plethysmography, dual energy X-ray absorptiometry, and MRI or magnetic resonance spectroscopy. Recent developments include three-dimensional photonic scanning and quantitative magnetic resonance. Collectively, these techniques allow for the measurement of fat, fat-free mass, bone mineral content, total body water, extracellular water, total adipose tissue and its subdepots (visceral, subcutaneous, and intermuscular), skeletal muscle, select organs, and ectopic fat depots. Summary There is an ongoing need to perfect methods that provide information beyond mass and structure (static measures) to kinetic measures that yield information on metabolic and biological functions. On the basis of the wide range of measurable properties, analytical methods and known body composition models, clinicians and scientists can quantify a number of body components and with longitudinal assessment, can track changes in health and disease with implications for understanding efficacy of nutritional and clinical interventions, diagnosis, prevention, and treatment in clinical settings. With the greater need to understand precursors of health risk beginning in childhood, a gap exists in appropriate in-vivo measurement methods beginning at birth. PMID:18685451

A systematic review of methods to assess intake of fruits and vegetables among healthy European adults and children: a DEDIPAC (DEterminants of DIet and Physical Activity) study.

PubMed

Riordan, Fiona; Ryan, Kathleen; Perry, Ivan J; Schulze, Matthias B; Andersen, Lene Frost; Geelen, Anouk; Van't Veer, Pieter; Eussen, Simone; Dagnelie, Pieter; Wijckmans-Duysens, Nicole; Harrington, Janas M

2017-02-01

Evidence suggests that health benefits are associated with consuming recommended amounts of fruits and vegetables (F&V), yet standardised assessment methods to measure F&V intake are lacking. The current review aims to identify methods to assess F&V intake among children and adults in pan-European studies and inform the development of the DEDIPAC (DEterminants of DIet and Physical Activity) toolbox of methods suitable for use in future European studies. A literature search was conducted using three electronic databases and by hand-searching reference lists. English-language studies of any design which assessed F&V intake were included in the review. Studies involving two or more European countries were included in the review. Healthy, free-living children or adults. The review identified fifty-one pan-European studies which assessed F&V intake. The FFQ was the most commonly used (n 42), followed by 24 h recall (n 11) and diet records/diet history (n 7). Differences existed between the identified methods; for example, the number of F&V items on the FFQ and whether potatoes/legumes were classified as vegetables. In total, eight validated instruments were identified which assessed F&V intake among adults, adolescents or children. The current review indicates that an agreed classification of F&V is needed in order to standardise intake data more effectively between European countries. Validated methods used in pan-European populations encompassing a range of European regions were identified. These methods should be considered for use by future studies focused on evaluating intake of F&V.

Improved accuracy of supervised CRM discovery with interpolated Markov models and cross-species comparison

PubMed Central

Kazemian, Majid; Zhu, Qiyun; Halfon, Marc S.; Sinha, Saurabh

2011-01-01

Despite recent advances in experimental approaches for identifying transcriptional cis-regulatory modules (CRMs, ‘enhancers’), direct empirical discovery of CRMs for all genes in all cell types and environmental conditions is likely to remain an elusive goal. Effective methods for computational CRM discovery are thus a critically needed complement to empirical approaches. However, existing computational methods that search for clusters of putative binding sites are ineffective if the relevant TFs and/or their binding specificities are unknown. Here, we provide a significantly improved method for ‘motif-blind’ CRM discovery that does not depend on knowledge or accurate prediction of TF-binding motifs and is effective when limited knowledge of functional CRMs is available to ‘supervise’ the search. We propose a new statistical method, based on ‘Interpolated Markov Models’, for motif-blind, genome-wide CRM discovery. It captures the statistical profile of variable length words in known CRMs of a regulatory network and finds candidate CRMs that match this profile. The method also uses orthologs of the known CRMs from closely related genomes. We perform in silico evaluation of predicted CRMs by assessing whether their neighboring genes are enriched for the expected expression patterns. This assessment uses a novel statistical test that extends the widely used Hypergeometric test of gene set enrichment to account for variability in intergenic lengths. We find that the new CRM prediction method is superior to existing methods. Finally, we experimentally validate 12 new CRM predictions by examining their regulatory activity in vivo in Drosophila; 10 of the tested CRMs were found to be functional, while 6 of the top 7 predictions showed the expected activity patterns. We make our program available as downloadable source code, and as a plugin for a genome browser installed on our servers. PMID:21821659

Time to stabilization in single leg drop jump landings: an examination of calculation methods and assessment of differences in sample rate, filter settings and trial length on outcome values.

PubMed

Fransz, Duncan P; Huurnink, Arnold; de Boode, Vosse A; Kingma, Idsart; van Dieën, Jaap H

2015-01-01

Time to stabilization (TTS) is the time it takes for an individual to return to a baseline or stable state following a jump or hop landing. A large variety exists in methods to calculate the TTS. These methods can be described based on four aspects: (1) the input signal used (vertical, anteroposterior, or mediolateral ground reaction force) (2) signal processing (smoothed by sequential averaging, a moving root-mean-square window, or fitting an unbounded third order polynomial), (3) the stable state (threshold), and (4) the definition of when the (processed) signal is considered stable. Furthermore, differences exist with regard to the sample rate, filter settings and trial length. Twenty-five healthy volunteers performed ten 'single leg drop jump landing' trials. For each trial, TTS was calculated according to 18 previously reported methods. Additionally, the effects of sample rate (1000, 500, 200 and 100 samples/s), filter settings (no filter, 40, 15 and 10 Hz), and trial length (20, 14, 10, 7, 5 and 3s) were assessed. The TTS values varied considerably across the calculation methods. The maximum effect of alterations in the processing settings, averaged over calculation methods, were 2.8% (SD 3.3%) for sample rate, 8.8% (SD 7.7%) for filter settings, and 100.5% (SD 100.9%) for trial length. Differences in TTS calculation methods are affected differently by sample rate, filter settings and trial length. The effects of differences in sample rate and filter settings are generally small, while trial length has a large effect on TTS values. Copyright © 2014 Elsevier B.V. All rights reserved.

A Ranking Approach to Genomic Selection.

PubMed

Blondel, Mathieu; Onogi, Akio; Iwata, Hiroyoshi; Ueda, Naonori

2015-01-01

Genomic selection (GS) is a recent selective breeding method which uses predictive models based on whole-genome molecular markers. Until now, existing studies formulated GS as the problem of modeling an individual's breeding value for a particular trait of interest, i.e., as a regression problem. To assess predictive accuracy of the model, the Pearson correlation between observed and predicted trait values was used. In this paper, we propose to formulate GS as the problem of ranking individuals according to their breeding value. Our proposed framework allows us to employ machine learning methods for ranking which had previously not been considered in the GS literature. To assess ranking accuracy of a model, we introduce a new measure originating from the information retrieval literature called normalized discounted cumulative gain (NDCG). NDCG rewards more strongly models which assign a high rank to individuals with high breeding value. Therefore, NDCG reflects a prerequisite objective in selective breeding: accurate selection of individuals with high breeding value. We conducted a comparison of 10 existing regression methods and 3 new ranking methods on 6 datasets, consisting of 4 plant species and 25 traits. Our experimental results suggest that tree-based ensemble methods including McRank, Random Forests and Gradient Boosting Regression Trees achieve excellent ranking accuracy. RKHS regression and RankSVM also achieve good accuracy when used with an RBF kernel. Traditional regression methods such as Bayesian lasso, wBSR and BayesC were found less suitable for ranking. Pearson correlation was found to correlate poorly with NDCG. Our study suggests two important messages. First, ranking methods are a promising research direction in GS. Second, NDCG can be a useful evaluation measure for GS.

Policy-Led Comparative Environmental Risk Assessment of Genetically Modified Crops: Testing for Increased Risk Rather Than Profiling Phenotypes Leads to Predictable and Transparent Decision-Making

PubMed Central

Raybould, Alan; Macdonald, Phil

2018-01-01

We describe two contrasting methods of comparative environmental risk assessment for genetically modified (GM) crops. Both are science-based, in the sense that they use science to help make decisions, but they differ in the relationship between science and policy. Policy-led comparative risk assessment begins by defining what would be regarded as unacceptable changes when the use a particular GM crop replaces an accepted use of another crop. Hypotheses that these changes will not occur are tested using existing or new data, and corroboration or falsification of the hypotheses is used to inform decision-making. Science-led comparative risk assessment, on the other hand, tends to test null hypotheses of no difference between a GM crop and a comparator. The variables that are compared may have little or no relevance to any previously stated policy objective and hence decision-making tends to be ad hoc in response to possibly spurious statistical significance. We argue that policy-led comparative risk assessment is the far more effective method. With this in mind, we caution that phenotypic profiling of GM crops, particularly with omics methods, is potentially detrimental to risk assessment. PMID:29755975

The Selection and Placement Method of Materialized Views on Big Data Platform of Equipment Condition Assessment

NASA Astrophysics Data System (ADS)

Ma, Yan; Yao, Jinxia; Gu, Chao; Chen, Yufeng; Yang, Yi; Zou, Lida

2017-05-01

With the formation of electric big data environment, more and more big data analyses emerge. In the complicated data analysis on equipment condition assessment, there exist many join operations, which are time-consuming. In order to save time, the approach of materialized view is usually used. It places part of common and critical join results on external storage and avoids the frequent join operation. In the paper we propose the methods of selecting and placing materialized views to reduce the query time of electric transmission and transformation equipment, and make the profits of service providers maximal. In selection method we design a computation way for the value of non-leaf node based on MVPP structure chart. In placement method we use relevance weights to place the selected materialized views, which help reduce the network transmission time. Our experiments show that the proposed selection and placement methods have a high throughput and good optimization ability of query time for electric transmission and transformation equipment.

Surveying immigrants without sampling frames - evaluating the success of alternative field methods.

PubMed

Reichel, David; Morales, Laura

2017-01-01

This paper evaluates the sampling methods of an international survey, the Immigrant Citizens Survey, which aimed at surveying immigrants from outside the European Union (EU) in 15 cities in seven EU countries. In five countries, no sample frame was available for the target population. Consequently, alternative ways to obtain a representative sample had to be found. In three countries 'location sampling' was employed, while in two countries traditional methods were used with adaptations to reach the target population. The paper assesses the main methodological challenges of carrying out a survey among a group of immigrants for whom no sampling frame exists. The samples of the survey in these five countries are compared to results of official statistics in order to assess the accuracy of the samples obtained through the different sampling methods. It can be shown that alternative sampling methods can provide meaningful results in terms of core demographic characteristics although some estimates differ to some extent from the census results.

Application of Entropy Method in River Health Evaluation Based on Aquatic Ecological Function Regionalization

NASA Astrophysics Data System (ADS)

Shi, Yan-ting; Liu, Jie; Wang, Peng; Zhang, Xu-nuo; Wang, Jun-qiang; Guo, Liang

2017-05-01

With the implementation of water environment management in key basins in China, the monitoring and evaluation system of basins are in urgent need of innovation and upgrading. In view of the heavy workload of existing evaluation methods and the cumbersome calculation of multi-factor weighting method, the idea of using entroy method to assess river health based on aquatic ecological function regionalization was put forward. According to the monitoring data of songhua river in the year of 2011-2015, the entropy weight method was used to calculate the weight of 9 evaluation factors of 29 monitoring sections, and the river health assessment was carried out. In the study area, the river health status of the biodiversity conservation function area (4.111 point) was good, the water conservation function area (3.371 point), the habitat maintenance functional area (3.262 point), the agricultural production maintenance functional area (3.695 point) and the urban supporting functional area (3.399 point) was light pollution.

Ensemble-based prediction of RNA secondary structures.

PubMed

Aghaeepour, Nima; Hoos, Holger H

2013-04-24

Accurate structure prediction methods play an important role for the understanding of RNA function. Energy-based, pseudoknot-free secondary structure prediction is one of the most widely used and versatile approaches, and improved methods for this task have received much attention over the past five years. Despite the impressive progress that as been achieved in this area, existing evaluations of the prediction accuracy achieved by various algorithms do not provide a comprehensive, statistically sound assessment. Furthermore, while there is increasing evidence that no prediction algorithm consistently outperforms all others, no work has been done to exploit the complementary strengths of multiple approaches. In this work, we present two contributions to the area of RNA secondary structure prediction. Firstly, we use state-of-the-art, resampling-based statistical methods together with a previously published and increasingly widely used dataset of high-quality RNA structures to conduct a comprehensive evaluation of existing RNA secondary structure prediction procedures. The results from this evaluation clarify the performance relationship between ten well-known existing energy-based pseudoknot-free RNA secondary structure prediction methods and clearly demonstrate the progress that has been achieved in recent years. Secondly, we introduce AveRNA, a generic and powerful method for combining a set of existing secondary structure prediction procedures into an ensemble-based method that achieves significantly higher prediction accuracies than obtained from any of its component procedures. Our new, ensemble-based method, AveRNA, improves the state of the art for energy-based, pseudoknot-free RNA secondary structure prediction by exploiting the complementary strengths of multiple existing prediction procedures, as demonstrated using a state-of-the-art statistical resampling approach. In addition, AveRNA allows an intuitive and effective control of the trade-off between false negative and false positive base pair predictions. Finally, AveRNA can make use of arbitrary sets of secondary structure prediction procedures and can therefore be used to leverage improvements in prediction accuracy offered by algorithms and energy models developed in the future. Our data, MATLAB software and a web-based version of AveRNA are publicly available at http://www.cs.ubc.ca/labs/beta/Software/AveRNA.

Modeling Input Errors to Improve Uncertainty Estimates for Sediment Transport Model Predictions

NASA Astrophysics Data System (ADS)

Jung, J. Y.; Niemann, J. D.; Greimann, B. P.

2016-12-01

Bayesian methods using Markov chain Monte Carlo algorithms have recently been applied to sediment transport models to assess the uncertainty in the model predictions due to the parameter values. Unfortunately, the existing approaches can only attribute overall uncertainty to the parameters. This limitation is critical because no model can produce accurate forecasts if forced with inaccurate input data, even if the model is well founded in physical theory. In this research, an existing Bayesian method is modified to consider the potential errors in input data during the uncertainty evaluation process. The input error is modeled using Gaussian distributions, and the means and standard deviations are treated as uncertain parameters. The proposed approach is tested by coupling it to the Sedimentation and River Hydraulics - One Dimension (SRH-1D) model and simulating a 23-km reach of the Tachia River in Taiwan. The Wu equation in SRH-1D is used for computing the transport capacity for a bed material load of non-cohesive material. Three types of input data are considered uncertain: (1) the input flowrate at the upstream boundary, (2) the water surface elevation at the downstream boundary, and (3) the water surface elevation at a hydraulic structure in the middle of the reach. The benefits of modeling the input errors in the uncertainty analysis are evaluated by comparing the accuracy of the most likely forecast and the coverage of the observed data by the credible intervals to those of the existing method. The results indicate that the internal boundary condition has the largest uncertainty among those considered. Overall, the uncertainty estimates from the new method are notably different from those of the existing method for both the calibration and forecast periods.

Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

PubMed

Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

2009-12-01

Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

Current challenges in bioequivalence, quality, and novel assessment technologies for topical products.

PubMed

Yacobi, Avraham; Shah, Vinod P; Bashaw, Edward D; Benfeldt, Eva; Davit, Barbara; Ganes, Derek; Ghosh, Tapash; Kanfer, Isadore; Kasting, Gerald B; Katz, Lindsey; Lionberger, Robert; Lu, Guang Wei; Maibach, Howard I; Pershing, Lynn K; Rackley, Russell J; Raw, Andre; Shukla, Chinmay G; Thakker, Kailas; Wagner, Nathalie; Zovko, Elizabeta; Lane, Majella E

2014-04-01

This paper summarises the proceedings of a recent workshop which brought together pharmaceutical scientists and dermatologists from academia, industry and regulatory agencies to discuss current regulatory issues and industry practices for establishing therapeutic bioequivalence (BE) of dermatologic topical products. The methods currently available for assessment of BE were reviewed as well as alternatives and the advantages and disadvantages of each method were considered. Guidance on quality and performance of topical products was reviewed and a framework to categorise existing and alternative methods for evaluation of BE was discussed. The outcome of the workshop emphasized both a need for greater attention to quality, possibly, via a Quality-By-Design (QBD) approach and a need to develop a "whole toolkit" approach towards the problem of determination of rate and extent in the assessment of topical bioavailability. The discussion on the BE and clinical equivalence of topical products revealed considerable concerns about the variability present in the current methodologies utilized by the industry and regulatory agencies. It was proposed that academicians, researchers, the pharmaceutical industry and regulators work together to evaluate and validate alternative methods that are based on both the underlying science and are adapted to the drug product itself instead of single "universal" method.

An integrated risk and vulnerability assessment framework for climate change and malaria transmission in East Africa.

PubMed

Onyango, Esther Achieng; Sahin, Oz; Awiti, Alex; Chu, Cordia; Mackey, Brendan

2016-11-11

Malaria is one of the key research concerns in climate change-health relationships. Numerous risk assessments and modelling studies provide evidence that the transmission range of malaria will expand with rising temperatures, adversely impacting on vulnerable communities in the East African highlands. While there exist multiple lines of evidence for the influence of climate change on malaria transmission, there is insufficient understanding of the complex and interdependent factors that determine the risk and vulnerability of human populations at the community level. Moreover, existing studies have had limited focus on the nature of the impacts on vulnerable communities or how well they are prepared to cope. In order to address these gaps, a systems approach was used to present an integrated risk and vulnerability assessment framework for studies of community level risk and vulnerability to malaria due to climate change. Drawing upon published literature on existing frameworks, a systems approach was applied to characterize the factors influencing the interactions between climate change and malaria transmission. This involved structural analysis to determine influential, relay, dependent and autonomous variables in order to construct a detailed causal loop conceptual model that illustrates the relationships among key variables. An integrated assessment framework that considers indicators of both biophysical and social vulnerability was proposed based on the conceptual model. A major conclusion was that this integrated assessment framework can be implemented using Bayesian Belief Networks, and applied at a community level using both quantitative and qualitative methods with stakeholder engagement. The approach enables a robust assessment of community level risk and vulnerability to malaria, along with contextually relevant and targeted adaptation strategies for dealing with malaria transmission that incorporate both scientific and community perspectives.

Comparison of several methods for estimating low speed stability derivatives

NASA Technical Reports Server (NTRS)

Fletcher, H. S.

1971-01-01

Methods presented in five different publications have been used to estimate the low-speed stability derivatives of two unpowered airplane configurations. One configuration had unswept lifting surfaces, the other configuration was the D-558-II swept-wing research airplane. The results of the computations were compared with each other, with existing wind-tunnel data, and with flight-test data for the D-558-II configuration to assess the relative merits of the methods for estimating derivatives. The results of the study indicated that, in general, for low subsonic speeds, no one text appeared consistently better for estimating all derivatives.

Quantile Regression for Recurrent Gap Time Data

PubMed Central

Luo, Xianghua; Huang, Chiung-Yu; Wang, Lan

2014-01-01

Summary Evaluating covariate effects on gap times between successive recurrent events is of interest in many medical and public health studies. While most existing methods for recurrent gap time analysis focus on modeling the hazard function of gap times, a direct interpretation of the covariate effects on the gap times is not available through these methods. In this article, we consider quantile regression that can provide direct assessment of covariate effects on the quantiles of the gap time distribution. Following the spirit of the weighted risk-set method by Luo and Huang (2011, Statistics in Medicine 30, 301–311), we extend the martingale-based estimating equation method considered by Peng and Huang (2008, Journal of the American Statistical Association 103, 637–649) for univariate survival data to analyze recurrent gap time data. The proposed estimation procedure can be easily implemented in existing software for univariate censored quantile regression. Uniform consistency and weak convergence of the proposed estimators are established. Monte Carlo studies demonstrate the effectiveness of the proposed method. An application to data from the Danish Psychiatric Central Register is presented to illustrate the methods developed in this article. PMID:23489055

Development of the Final Version of the Classification and Assessment of Occupational Dysfunction Scale

PubMed Central

Teraoka, Mutsumi; Kyougoku, Makoto

2015-01-01

Occupational therapy is involved in disability prevention and health enhancement through the prevention of occupational dysfunction. Although many occupational dysfunction scales exist, no standard method is available for the assessment and classification of occupational dysfunction, which may include occupational imbalance, occupational deprivation, occupational alienation, and occupational marginalization. The purpose of this study was to develop the final version of Classification and Assessment of Occupational Dysfunction (CAOD). Our study demonstrated the validity and reliability of CAOD in a group of undergraduate students. The CAOD scale includes 16 items and addresses the following 4 domains: occupational imbalance, occupational deprivation, occupational alienation, and occupational marginalization. PMID:26263375

Developing Mathematical Provisions for Assessment of Liquid Hydrocarbon Emissions in Emergency Situations

NASA Astrophysics Data System (ADS)

Zemenkova, M. Yu; Zemenkov, Yu D.; Shantarin, V. D.

2016-10-01

The paper reviews the development of methodology for calculation of hydrocarbon emissions during seepage and evaporation to monitor the reliability and safety of hydrocarbon storage and transportation. The authors have analyzed existing methods, models and techniques for assessing the amount of evaporated oil. Models used for predicting the material balance of multicomponent two-phase systems have been discussed. The results of modeling the open-air hydrocarbon evaporation from an oil spill are provided and exemplified by an emergency pit. Dependences and systems of differential equations have been obtained to assess parameters of mass transfer from the open surface of a liquid multicomponent mixture.

Assessment of SOAP note evaluation tools in colleges and schools of pharmacy.

PubMed

Sando, Karen R; Skoy, Elizabeth; Bradley, Courtney; Frenzel, Jeanne; Kirwin, Jennifer; Urteaga, Elizabeth

2017-07-01

To describe current methods used to assess SOAP notes in colleges and schools of pharmacy. Members of the American Association of Colleges of Pharmacy Laboratory Instructors Special Interest Group were invited to share assessment tools for SOAP notes. Content of submissions was evaluated to characterize overall qualities and how the tools assessed subjective, objective, assessment, and plan information. Thirty-nine assessment tools from 25 schools were evaluated. Twenty-nine (74%) of the tools were rubrics and ten (26%) were checklists. All rubrics included analytic scoring elements, while two (7%) were mixed with holistic and analytic scoring elements. A majority of the rubrics (35%) used a four-item rating scale. Substantial variability existed in how tools evaluated subjective and objective sections. All tools included problem identification in the assessment section. Other assessment items included goals (82%) and rationale (69%). Seventy-seven percent assessed drug therapy; however, only 33% assessed non-drug therapy. Other plan items included education (59%) and follow-up (90%). There is a great deal of variation in the specific elements used to evaluate SOAP notes in colleges and schools of pharmacy. Improved consistency in assessment methods to evaluate SOAP notes may better prepare students to produce standardized documentation when entering practice. Copyright © 2017 Elsevier Inc. All rights reserved.

Microbiome and pancreatic cancer: A comprehensive topic review of literature

PubMed Central

Ertz-Archambault, Natalie; Keim, Paul; Von Hoff, Daniel

2017-01-01

AIM To review microbiome alterations associated with pancreatic cancer, its potential utility in diagnostics, risk assessment, and influence on disease outcomes. METHODS A comprehensive literature review was conducted by all-inclusive topic review from PubMed, MEDLINE, and Web of Science. The last search was performed in October 2016. RESULTS Diverse microbiome alterations exist among several body sites including oral, gut, and pancreatic tissue, in patients with pancreatic cancer compared to healthy populations. CONCLUSION Pilot study successes in non-invasive screening strategies warrant further investigation for future translational application in early diagnostics and to learn modifiable risk factors relevant to disease prevention. Pre-clinical investigations exist in other tumor types that suggest microbiome manipulation provides opportunity to favorably transform cancer response to existing treatment protocols and improve survival. PMID:28348497

Characterization of Adipose Tissue Product Quality Using Measurements of Oxygen Consumption Rate.

PubMed

Suszynski, Thomas M; Sieber, David A; Mueller, Kathryn; Van Beek, Allen L; Cunningham, Bruce L; Kenkel, Jeffrey M

2018-03-14

Fat grafting is a common procedure in plastic surgery but associated with unpredictable graft retention. Adipose tissue (AT) "product" quality is affected by the methods used for harvest, processing and transfer, which vary widely amongst surgeons. Currently, there is no method available to accurately assess the quality of AT. In this study, we present a novel method for the assessment of AT product quality through direct measurements of oxygen consumption rate (OCR). OCR has exhibited potential in predicting outcomes following pancreatic islet transplant. Our study aim was to reapportion existing technology for its use with AT preparations and to confirm that these measurements are feasible. OCR was successfully measured for en bloc and postprocessed AT using a stirred microchamber system. OCR was then normalized to DNA content (OCR/DNA), which represents the AT product quality. Mean (±SE) OCR/DNA values for fresh en bloc and post-processed AT were 149.8 (± 9.1) and 61.1 (± 6.1) nmol/min/mg DNA, respectively. These preliminary data suggest that: (1) OCR and OCR/DNA measurements of AT harvested using conventional protocol are feasible; and (2) standard AT processing results in a decrease in overall AT product quality. OCR measurements of AT using existing technology can be done and enables accurate, real-time, quantitative assessment of the quality of AT product prior to transfer. The availability and further validation of this type of assay could enable optimization of fat grafting protocol by providing a tool for the more detailed study of procedural variables that affect AT product quality.

Characterizing left-right gait balance using footstep-induced structural vibrations

NASA Astrophysics Data System (ADS)

Fagert, Jonathon; Mirshekari, Mostafa; Pan, Shijia; Zhang, Pei; Noh, Hae Young

2017-04-01

In this paper, we introduce a method for estimating human left/right walking gait balance using footstep-induced structural vibrations. Understanding human gait balance is an integral component of assessing gait, neurological and musculoskeletal conditions, overall health status, and risk of falls. Existing techniques utilize pressure- sensing mats, wearable devices, and human observation-based assessment by healthcare providers. These existing methods are collectively limited in their operation and deployment; often requiring dense sensor deployment or direct user interaction. To address these limitations, we utilize footstep-induced structural vibration responses. Based on the physical insight that the vibration energy is a function of the force exerted by a footstep, we calculate the vibration signal energy due to a footstep and use it to estimate the footstep force. By comparing the footstep forces while walking, we determine balance. This approach enables non-intrusive gait balance assessment using sparsely deployed sensors. The primary research challenge is that the floor vibration signal energy is also significantly affected by the distance between the footstep location and the vibration sensor; this function is unclear in real-world scenarios and is a mixed function of wave propagation and structure-dependent properties. We overcome this challenge through footstep localization and incorporating structural factors into an analytical force-energy-distance function. This function is estimated through a nonlinear least squares regression analysis. We evaluate the performance of our method with a real-world deployment in a campus building. Our approach estimates footstep forces with a RMSE of 61.0N (8% of participant's body weight), representing a 1.54X improvement over the baseline.

Plausible combinations: An improved method to evaluate the covariate structure of Cormack-Jolly-Seber mark-recapture models

USGS Publications Warehouse

Bromaghin, Jeffrey F.; McDonald, Trent L.; Amstrup, Steven C.

2013-01-01

Mark-recapture models are extensively used in quantitative population ecology, providing estimates of population vital rates, such as survival, that are difficult to obtain using other methods. Vital rates are commonly modeled as functions of explanatory covariates, adding considerable flexibility to mark-recapture models, but also increasing the subjectivity and complexity of the modeling process. Consequently, model selection and the evaluation of covariate structure remain critical aspects of mark-recapture modeling. The difficulties involved in model selection are compounded in Cormack-Jolly- Seber models because they are composed of separate sub-models for survival and recapture probabilities, which are conceptualized independently even though their parameters are not statistically independent. The construction of models as combinations of sub-models, together with multiple potential covariates, can lead to a large model set. Although desirable, estimation of the parameters of all models may not be feasible. Strategies to search a model space and base inference on a subset of all models exist and enjoy widespread use. However, even though the methods used to search a model space can be expected to influence parameter estimation, the assessment of covariate importance, and therefore the ecological interpretation of the modeling results, the performance of these strategies has received limited investigation. We present a new strategy for searching the space of a candidate set of Cormack-Jolly-Seber models and explore its performance relative to existing strategies using computer simulation. The new strategy provides an improved assessment of the importance of covariates and covariate combinations used to model survival and recapture probabilities, while requiring only a modest increase in the number of models on which inference is based in comparison to existing techniques.

Sensitivity of effective rainfall amount to land use description using GIS tool. Case of a small mediterranean catchment

NASA Astrophysics Data System (ADS)

Payraudeau, S.; Tournoud, M. G.; Cernesson, F.

Distributed modelling in hydrology assess catchment subdivision to take into account physic characteristics. In this paper, we test the effect of land use aggregation scheme on catchment hydrological response. Evolution of intra-subcatchment land use is studied using statistic and entropy methods. The SCS-CN method is used to calculate effective rainfall which is here assimilated to hydrological response. Our purpose is to determine the existence of a critical threshold-area appropriate for the application of hydrological modelling. Land use aggregation effects on effective rainfall is assessed on small mediterranean catchment. The results show that land use aggregation and land use classification type have significant effects on hydrological modelling and in particular on effective rainfall modelling.

Prediction of forces and moments for hypersonic flight vehicle control effectors

NASA Technical Reports Server (NTRS)

Maughmer, Mark D.; Long, Lyle N.; Pagano, Peter J.

1991-01-01

Developing methods of predicting flight control forces and moments for hypersonic vehicles, included a preliminary assessment of subsonic/supersonic panel methods and hypersonic local flow inclination methods for such predictions. While these findings clearly indicate the usefulness of such methods for conceptual design activities, deficiencies exist in some areas. Thus, a second phase of research was proposed in which a better understanding is sought for the reasons of the successes and failures of the methods considered, particularly for the cases at hypersonic Mach numbers. To obtain this additional understanding, a more careful study of the results obtained relative to the methods used was undertaken. In addition, where appropriate and necessary, a more complete modeling of the flow was performed using well proven methods of computational fluid dynamics. As a result, assessments will be made which are more quantitative than those of phase 1 regarding the uncertainty involved in the prediction of the aerodynamic derivatives. In addition, with improved understanding, it is anticipated that improvements resulting in better accuracy will be made to the simple force and moment prediction.

Reliability database development for use with an object-oriented fault tree evaluation program

NASA Technical Reports Server (NTRS)

Heger, A. Sharif; Harringtton, Robert J.; Koen, Billy V.; Patterson-Hine, F. Ann

1989-01-01

A description is given of the development of a fault-tree analysis method using object-oriented programming. In addition, the authors discuss the programs that have been developed or are under development to connect a fault-tree analysis routine to a reliability database. To assess the performance of the routines, a relational database simulating one of the nuclear power industry databases has been constructed. For a realistic assessment of the results of this project, the use of one of existing nuclear power reliability databases is planned.

The need for a standard approach to assessing the functionality of rural community water supplies

NASA Astrophysics Data System (ADS)

Bonsor, Helen; MacDonald, Alan; Casey, Vincent; Carter, Richard; Wilson, Paul

2018-03-01

The Sustainable Development Goals have set an agenda for transformational change in water access, aiming for secure household connections globally. Despite this goal, communal groundwater supplies are likely to remain the main source of improved water supplies for many rural areas in Africa and South Asia for decades to come. Understanding the poor functionality of existing communal supplies remains, therefore, a priority. A critical first step is to establish a sector-wide definition of borehole supply functionality and a standard method of its assessment.

Damage assessment in multilayered MEMS structures under thermal fatigue

NASA Astrophysics Data System (ADS)

Maligno, A. R.; Whalley, D. C.; Silberschmidt, V. V.

2011-07-01

This paper reports on the application of a Physics of Failure (PoF) methodology to assessing the reliability of a micro electro mechanical system (MEMS). Numerical simulations, based on the finite element method (FEM) using a sub-domain approach was used to examine the damage onset due to temperature variations (e.g. yielding of metals which may lead to thermal fatigue). In this work remeshing techniques were employed in order to develop a damage tolerance approach based on the assumption that initial flaws exist in the multi-layered.

Development of a Research Participants’ Perception Survey to Improve Clinical Research

PubMed Central

Yessis, Jennifer L.; Kost, Rhonda G.; Lee, Laura M.; Coller, Barry S.; Henderson, David K.

2012-01-01

Abstract Introduction: Clinical research participants’ perceptions regarding their experiences during research protocols provide outcome‐based insights into the effectiveness of efforts to protect rights and safety, and opportunities to enhance participants’ clinical research experiences. Use of validated surveys measuring patient‐centered outcomes is standard in hospitals, yet no instruments exist to assess outcomes of clinical research processes. Methods: We derived survey questions from data obtained from focus groups comprised of research participants and professionals. We assessed the survey for face/content validity, and privacy/confidentiality protections and fielded it to research participants at 15 centers. We conducted analyses of response rates, sample characteristics, and psychometrics, including survey and item completion and analysis, internal consistency, item internal consistency, criterion‐related validity, and item usefulness. Responses were tested for fit into existing patient‐centered dimensions of care and new clinical research dimensions using Cronbach's alpha coefficient. Results: Surveys were mailed to 18,890 individuals; 4,961 were returned (29%). Survey completion was 89% overall; completion rates exceeded 90% for 88 of 93 evaluable items. Questions fit into three dimensions of patient‐centered care and two novel clinical research dimensions (Cronbach's alpha for dimensions: 0.69–0.85). Conclusions: The validated survey offers a new method for assessing and improving outcomes of clinical research processes. Clin Trans Sci 2012; Volume 5: 452–460 PMID:23253666

Assessing active faulting by hydrogeological modeling and superconducting gravimetry: A case study for Hsinchu Fault, Taiwan

NASA Astrophysics Data System (ADS)

Lien, Tzuyi; Cheng, Ching-Chung; Hwang, Cheinway; Crossley, David

2014-09-01

We develop a new hydrology and gravimetry-based method to assess whether or not a local fault may be active. We take advantage of an existing superconducting gravimeter (SG) station and a comprehensive groundwater network in Hsinchu to apply the method to the Hsinchu Fault (HF) across the Hsinchu Science Park, whose industrial output accounts for 10% of Taiwan's gross domestic product. The HF is suspected to pose seismic hazards to the park, but its existence and structure are not clear. The a priori geometry of the HF is translated into boundary conditions imposed in the hydrodynamic model. By varying the fault's location, depth, and including a secondary wrench fault, we construct five hydrodynamic models to estimate groundwater variations, which are evaluated by comparing groundwater levels and SG observations. The results reveal that the HF contains a low hydraulic conductivity core and significantly impacts groundwater flows in the aquifers. Imposing the fault boundary conditions leads to about 63-77% reduction in the differences between modeled and observed values (both water level and gravity). The test with fault depth shows that the HF's most recent slip occurred in the beginning of Holocene, supplying a necessary (but not sufficient) condition that the HF is currently active. A portable SG can act as a virtual borehole well for model assessment at critical locations of a suspected active fault.

Reliability and Validity of the Footprint Assessment Method Using Photoshop CS5 Software.

PubMed

Gutiérrez-Vilahú, Lourdes; Massó-Ortigosa, Núria; Costa-Tutusaus, Lluís; Guerra-Balic, Myriam

2015-05-01

Several sophisticated methods of footprint analysis currently exist. However, it is sometimes useful to apply standard measurement methods of recognized evidence with an easy and quick application. We sought to assess the reliability and validity of a new method of footprint assessment in a healthy population using Photoshop CS5 software (Adobe Systems Inc, San Jose, California). Forty-two footprints, corresponding to 21 healthy individuals (11 men with a mean ± SD age of 20.45 ± 2.16 years and 10 women with a mean ± SD age of 20.00 ± 1.70 years) were analyzed. Footprints were recorded in static bipedal standing position using optical podography and digital photography. Three trials for each participant were performed. The Hernández-Corvo, Chippaux-Smirak, and Staheli indices and the Clarke angle were calculated by manual method and by computerized method using Photoshop CS5 software. Test-retest was used to determine reliability. Validity was obtained by intraclass correlation coefficient (ICC). The reliability test for all of the indices showed high values (ICC, 0.98-0.99). Moreover, the validity test clearly showed no difference between techniques (ICC, 0.99-1). The reliability and validity of a method to measure, assess, and record the podometric indices using Photoshop CS5 software has been demonstrated. This provides a quick and accurate tool useful for the digital recording of morphostatic foot study parameters and their control.

Addressing unmeasured confounding in comparative observational research.

PubMed

Zhang, Xiang; Faries, Douglas E; Li, Hu; Stamey, James D; Imbens, Guido W

2018-04-01

Observational pharmacoepidemiological studies can provide valuable information on the effectiveness or safety of interventions in the real world, but one major challenge is the existence of unmeasured confounder(s). While many analytical methods have been developed for dealing with this challenge, they appear under-utilized, perhaps due to the complexity and varied requirements for implementation. Thus, there is an unmet need to improve understanding the appropriate course of action to address unmeasured confounding under a variety of research scenarios. We implemented a stepwise search strategy to find articles discussing the assessment of unmeasured confounding in electronic literature databases. Identified publications were reviewed and characterized by the applicable research settings and information requirements required for implementing each method. We further used this information to develop a best practice recommendation to help guide the selection of appropriate analytical methods for assessing the potential impact of unmeasured confounding. Over 100 papers were reviewed, and 15 methods were identified. We used a flowchart to illustrate the best practice recommendation which was driven by 2 critical components: (1) availability of information on the unmeasured confounders; and (2) goals of the unmeasured confounding assessment. Key factors for implementation of each method were summarized in a checklist to provide further assistance to researchers for implementing these methods. When assessing comparative effectiveness or safety in observational research, the impact of unmeasured confounding should not be ignored. Instead, we suggest quantitatively evaluating the impact of unmeasured confounding and provided a best practice recommendation for selecting appropriate analytical methods. Copyright © 2018 John Wiley & Sons, Ltd.

Evaluation of the immunogenicity of the dabigatran reversal agent idarucizumab during Phase I studies

PubMed Central

Norris, Stephen; Ramael, Steven; Ikushima, Ippei; Haazen, Wouter; Harada, Akiko; Moschetti, Viktoria; Imazu, Susumu; Reilly, Paul A.; Lang, Benjamin; Stangier, Joachim

2017-01-01

Aims Idarucizumab, a humanized monoclonal anti‐dabigatran antibody fragment, is effective in emergency reversal of dabigatran anticoagulation. Pre‐existing and treatment‐emergent anti‐idarucizumab antibodies (antidrug antibodies; ADA) may affect the safety and efficacy of idarucizumab. This analysis characterized the pre‐existing and treatment‐emergent ADA and assessed their impact on the pharmacokinetics and pharmacodynamics (PK/PD) of idarucizumab. Methods Data were pooled from three Phase I, randomized, double‐blind idarucizumab studies in healthy Caucasian subjects; elderly, renally impaired subjects; and healthy Japanese subjects. In plasma sampled before and after idarucizumab dosing, ADA were detected and titrated using a validated electrochemiluminescence method. ADA epitope specificities were examined using idarucizumab and two structurally related molecules. Idarucizumab PK/PD data were compared for subjects with and without pre‐existing ADA. Results Pre‐existing ADA were found in 33 out of 283 individuals (11.7%), seven of whom had intermittent ADA. Titres of pre‐existing and treatment‐emergent ADA were low, estimated equivalent to <0.3% of circulating idarucizumab after a 5 g dose. Pre‐existing ADA had no impact on dose‐normalized idarucizumab maximum plasma levels and exposure and, although data were limited, no impact on the reversal of dabigatran‐induced anticoagulation by idarucizumab. Treatment‐emergent ADA were detected in 20 individuals (19 out of 224 treated [8.5%]; 1 out of 59 received placebo [1.7%]) and were transient in ten. The majority had specificity primarily toward the C‐terminus of idarucizumab. There were no adverse events indicative of immunogenic reactions. Conclusion Pre‐existing and treatment‐emergent ADA were present at extremely low levels relative to the idarucizumab dosage under evaluation. The PK/PD of idarucizumab appeared to be unaffected by the presence of pre‐existing ADA. PMID:28230262

The development and evaluation of a program for leg-strengthening exercises and balance assessment using Kinect.

PubMed

Choi, Jin-Seung; Kang, Dong-Won; Seo, Jeong-Woo; Kim, Dae-Hyeok; Yang, Seung-Tae; Tack, Gye-Rae

2016-01-01

[Purpose] In this study, a program was developed for leg-strengthening exercises and balance assessment using Microsoft Kinect. [Subjects and Methods] The program consists of three leg-strengthening exercises (knee flexion, hip flexion, and hip extension) and the one-leg standing test (OLST). The program recognizes the correct exercise posture by comparison with the range of motion of the hip and knee joints and provides a number of correct action examples to improve training. The program measures the duration of the OLST and presents this as the balance-age. The accuracy of the program was analyzed using the data of five male adults. [Results] In terms of the motion recognition accuracy, the sensitivity and specificity were 95.3% and 100%, respectively. For the balance assessment, the time measured using the existing method with a stopwatch had an absolute error of 0.37 sec. [Conclusion] The developed program can be used to enable users to conduct leg-strengthening exercises and balance assessments at home.

The national assessment of shoreline change: A GIS compilation of vector shorelines and associated shoreline change data for the New England and Mid-Atlantic Coasts

USGS Publications Warehouse

Himmelstoss, Emily A.; Kratzmann, Meredith G.; Hapke, Cheryl; Thieler, E. Robert; List, Jeffrey

2010-01-01

Sandy ocean beaches are a popular recreational destination, often surrounded by communities containing valuable real estate. Development is on the rise despite the fact that coastal infrastructure is subjected to flooding and erosion. As a result, there is an increased demand for accurate information regarding past and present shoreline changes. The U.S. Geological Survey's National Assessment of Shoreline Change Project has compiled a comprehensive database of digital vector shorelines and shoreline-change rates for the New England and Mid-Atlantic Coasts. There is currently no widely accepted standard for analyzing shoreline change. Existing measurement and rate-calculation methods vary from study to study and preclude combining results into statewide or regional assessments. The impetus behind the National Assessment project was to develop a standardized method that is consistent from coast to coast for measuring changes in shoreline position. The goal was to facilitate the process of periodically and systematically updating the results in an internally consistent manner.

Weighting Criteria and Prioritizing of Heat stress indices in surface mining using a Delphi Technique and Fuzzy AHP-TOPSIS Method.

PubMed

Asghari, Mehdi; Nassiri, Parvin; Monazzam, Mohammad Reza; Golbabaei, Farideh; Arabalibeik, Hossein; Shamsipour, Aliakbar; Allahverdy, Armin

2017-01-01

Heat stress as a physical harmful agent can increase the risk of health and safety problems in different workplaces such as mining. Although there are different indices to assess the heat stress imposed on workers, choosing the best index for a specific workplace is so important. Since various criteria affect an index applicability, extracting the most effective ones and determining their weights help to prioritize the existing indices and select the optimal index. In order to achieve this aim, present study compared some heat stress indices using effective methods. The viewpoints of occupational health experts and the qualitative Delphi methods were used to extract the most important criteria. Then, the weights of 11 selected criteria were determined by Fuzzy Analytic Hierarchy Process. Finally, fuzzy TOPSIS technique was applied for choosing the most suitable heat stress index. According to result, simplicity, reliability, being low cost, and comprehensiveness were the most determinative criteria for a heat stress index. Based on these criteria and their weights, the existing indices were prioritized. Eventually, wet bulb glob temperature appropriated the first priority and it was proposed as an applicable index for evaluating the heat stress at outdoor hot environments such as surface mines. The use of these strong methods allows introducing the most simple, precise, and applicable tool for evaluation the heat stress in hot environments. It seems that WBGT acts as an appropriate index for assessing the heat stress in mining activities at outdoors.

Rapid Structured Volume Grid Smoothing and Adaption Technique

NASA Technical Reports Server (NTRS)

Alter, Stephen J.

2006-01-01

A rapid, structured volume grid smoothing and adaption technique, based on signal processing methods, was developed and applied to the Shuttle Orbiter at hypervelocity flight conditions in support of the Columbia Accident Investigation. Because of the fast pace of the investigation, computational aerothermodynamicists, applying hypersonic viscous flow solving computational fluid dynamic (CFD) codes, refined and enhanced a grid for an undamaged baseline vehicle to assess a variety of damage scenarios. Of the many methods available to modify a structured grid, most are time-consuming and require significant user interaction. By casting the grid data into different coordinate systems, specifically two computational coordinates with arclength as the third coordinate, signal processing methods are used for filtering the data [Taubin, CG v/29 1995]. Using a reverse transformation, the processed data are used to smooth the Cartesian coordinates of the structured grids. By coupling the signal processing method with existing grid operations within the Volume Grid Manipulator tool, problems related to grid smoothing are solved efficiently and with minimal user interaction. Examples of these smoothing operations are illustrated for reductions in grid stretching and volume grid adaptation. In each of these examples, other techniques existed at the time of the Columbia accident, but the incorporation of signal processing techniques reduced the time to perform the corrections by nearly 60%. This reduction in time to perform the corrections therefore enabled the assessment of approximately twice the number of damage scenarios than previously possible during the allocated investigation time.

Rapid Structured Volume Grid Smoothing and Adaption Technique

NASA Technical Reports Server (NTRS)

Alter, Stephen J.

2004-01-01

A rapid, structured volume grid smoothing and adaption technique, based on signal processing methods, was developed and applied to the Shuttle Orbiter at hypervelocity flight conditions in support of the Columbia Accident Investigation. Because of the fast pace of the investigation, computational aerothermodynamicists, applying hypersonic viscous flow solving computational fluid dynamic (CFD) codes, refined and enhanced a grid for an undamaged baseline vehicle to assess a variety of damage scenarios. Of the many methods available to modify a structured grid, most are time-consuming and require significant user interaction. By casting the grid data into different coordinate systems, specifically two computational coordinates with arclength as the third coordinate, signal processing methods are used for filtering the data [Taubin, CG v/29 1995]. Using a reverse transformation, the processed data are used to smooth the Cartesian coordinates of the structured grids. By coupling the signal processing method with existing grid operations within the Volume Grid Manipulator tool, problems related to grid smoothing are solved efficiently and with minimal user interaction. Examples of these smoothing operations are illustrated for reduction in grid stretching and volume grid adaptation. In each of these examples, other techniques existed at the time of the Columbia accident, but the incorporation of signal processing techniques reduced the time to perform the corrections by nearly 60%. This reduction in time to perform the corrections therefore enabled the assessment of approximately twice the number of damage scenarios than previously possible during the allocated investigation time.

Assessing disease stress and modeling yield losses in alfalfa

NASA Astrophysics Data System (ADS)

Guan, Jie

Alfalfa is the most important forage crop in the U.S. and worldwide. Fungal foliar diseases are believed to cause significant yield losses in alfalfa, yet, little quantitative information exists regarding the amount of crop loss. Different fungicides and application frequencies were used as tools to generate a range of foliar disease intensities in Ames and Nashua, IA. Visual disease assessments (disease incidence, disease severity, and percentage defoliation) were obtained weekly for each alfalfa growth cycle (two to three growing cycles per season). Remote sensing assessments were performed using a hand-held, multispectral radiometer to measure the amount and quality of sunlight reflected from alfalfa canopies. Factors such as incident radiation, sun angle, sensor height, and leaf wetness were all found to significantly affect the percentage reflectance of sunlight reflected from alfalfa canopies. The precision of visual and remote sensing assessment methods was quantified. Precision was defined as the intra-rater repeatability and inter-rater reliability of assessment methods. F-tests, slopes, intercepts, and coefficients of determination (R2) were used to compare assessment methods for precision. Results showed that among the three visual disease assessment methods (disease incidence, disease severity, and percentage defoliation), percentage defoliation had the highest intra-rater repeatability and inter-rater reliability. Remote sensing assessment method had better precision than the percentage defoliation assessment method based upon higher intra-rater repeatability and inter-rater reliability. Significant linear relationships between canopy reflectance (810 nm), percentage defoliation and yield were detected using linear regression and percentage reflectance (810 nm) assessments were found to have a stronger relationship with yield than percentage defoliation assessments. There were also significant linear relationships between percentage defoliation, dry weight, percentage reflectance (810 nm), and green leaf area index (GLAI). Percentage reflectance (810 nm) assessments had a stronger relationship with dry weight and green leaf area index than percentage defoliation assessments. Our research conclusively demonstrates that percentage reflectance measurements can be used to nondestructively assess green leaf area index which is a direct measure of plant health and an indirect measure of productivity. This research conclusively demonstrates that remote sensing is superior to visual assessment method to assess alfalfa stress and to model yield and GLAI in the alfalfa foliar disease pathosystem.

Applicability of ambient toxicity testing to national or regional water-quality assessment

USGS Publications Warehouse

Elder, John F.

1990-01-01

Comprehensive assessment of the quality of natural waters requires a multifaceted approach. Descriptions of existing conditions may be achieved by various kinds of chemical and hydrologic analyses, whereas information about the effects of such conditions on living organisms depends on biological monitoring. Toxicity testing is one type of biological monitoring that can be used to identify possible effects of toxic contaminants. Based on experimentation designed to monitor responses of organisms to environmental stresses, toxicity testing may have diverse purposes in water-quality assessments. These purposes may include identification of areas that warrant further study because of poor water quality or unusual ecological features, verification of other types of monitoring, or assessment of contaminant effects on aquatic communities. Toxicity-test results are most effective when used as a complement to chemical analyses, hydrologic measurements, and other biological monitoring. However, all toxicity-testing procedures have certain limitations that must be considered in developing the methodology and applications of toxicity testing in any large-scale water-quality-assessment program. A wide variety of toxicity-test methods have been developed to fulfill the needs of diverse applications. The methods differ primarily in the selections made relative to four characteristics: (1) test species, (2) endpoint (acute or chronic), (3) test-enclosure type, and (4) test substance (toxicant) that functions as the environmental stress. Toxicity-test approaches vary in their capacity to meet the needs of large-scale assessments of existing water quality. Ambient testing, whereby the test organism is exposed to naturally occurring substances that contain toxicant mixtures in an organic or inorganic matrix, is more likely to meet these needs than are procedures that call for exposure of the test organisms to known concentrations of a single toxicant. However, meaningful interpretation of ambient test results depends on the existence of accompanying chemical analysis of the ambient media. The ambient test substance may be water or sediments. Sediment tests have had limited application, but they are useful because most toxicants tend to accumulate in sediments and many test species either inhabit the sediments or are in frequent contact with them. Biochemical testing methods, which have been developing rapidly in recent years, are likely to be among the most useful procedures for large-scale water-quality assessments. They are relatively rapid and simple, and more. importantly, they focus on biochemical changes that are the initial responses of virtually all organisms to environmental stimuli. Most species are sensitive to relatively few toxicants, and their sensitivities vary as conditions change. Therefore, each test method has particular uses and limitations, and no single test has universal applicability. One of the most informative approaches to toxicity testing is to combine biochemical tests with other test methods in a 'battery of tests' that is diversified enough to characterize different types of toxicants and different trophic levels. However, such an approach can be costly, and if not carefully designed, it may not yield enough additional information to warrant the additional cost. The application of toxicity tests to large-scale water-quality assessments is hampered by a number of difficulties. Toxicity tests often are not sensitive enough to enable detection of most contaminant problems in the natural environment. Furthermore, because sensitivities among different species and test conditions can be highly variable, conclusions about the toxicant problems of an ecosystem are strongly dependent on the test procedure used. In addition, the experimental systems used in toxicity tests cannot replicate the complexity or variability of natural conditions, and positive test results cannot identify the source or nature of

Blending Qualitative and Computational Linguistics Methods for Fidelity Assessment: Experience with the Familias Unidas Preventive Intervention.

PubMed

Gallo, Carlos; Pantin, Hilda; Villamar, Juan; Prado, Guillermo; Tapia, Maria; Ogihara, Mitsunori; Cruden, Gracelyn; Brown, C Hendricks

2015-09-01

Careful fidelity monitoring and feedback are critical to implementing effective interventions. A wide range of procedures exist to assess fidelity; most are derived from observational assessments (Schoenwald and Garland, Psycholog Assess 25:146-156, 2013). However, these fidelity measures are resource intensive for research teams in efficacy/effectiveness trials, and are often unattainable or unmanageable for the host organization to rate when the program is implemented on a large scale. We present a first step towards automated processing of linguistic patterns in fidelity monitoring of a behavioral intervention using an innovative mixed methods approach to fidelity assessment that uses rule-based, computational linguistics to overcome major resource burdens. Data come from an effectiveness trial of the Familias Unidas intervention, an evidence-based, family-centered preventive intervention found to be efficacious in reducing conduct problems, substance use and HIV sexual risk behaviors among Hispanic youth. This computational approach focuses on "joining," which measures the quality of the working alliance of the facilitator with the family. Quantitative assessments of reliability are provided. Kappa scores between a human rater and a machine rater for the new method for measuring joining reached 0.83. Early findings suggest that this approach can reduce the high cost of fidelity measurement and the time delay between fidelity assessment and feedback to facilitators; it also has the potential for improving the quality of intervention fidelity ratings.

Strengthening Methods for Assessing Students' Metahistorical Conceptions: Initial Development of the Historical Account Differences Survey

ERIC Educational Resources Information Center

O'Neill, D. Kevin; Guloy, Sheryl; Sensoy, Özlem

2014-01-01

To prepare students for participation in a pluralistic, democratic society, history curriculum should help them develop mature ideas about why multiple accounts of the same events exist. But how can we know if we are successful? In this article, we describe work on the design, validation, and piloting of a paper-and-pencil instrument called the…

Analyzing Cultural Consensus with Proportional Reduction in Error (PRE): Beyond the Eigenvalue Ratio

ERIC Educational Resources Information Center

Lacy, Michael G.; Snodgrass, Jeffrey G.

2016-01-01

This article provides an alternate method to assess the fit of the cultural consensus model (CCM) of Romney and colleagues to the responses of a group of informants about a domain of knowledge, and thus also to evaluate the extent of shared knowledge within a group. Criteria for judging the existence of singular culture have been articulated…

A Semi-Parametric Bayesian Mixture Modeling Approach for the Analysis of Judge Mediated Data

ERIC Educational Resources Information Center

Muckle, Timothy Joseph

2010-01-01

Existing methods for the analysis of ordinal-level data arising from judge ratings, such as the Multi-Facet Rasch model (MFRM, or the so-called Facets model) have been widely used in assessment in order to render fair examinee ability estimates in situations where the judges vary in their behavior or severity. However, this model makes certain…

Assessing the Impact of Regeneration Spending: Lessons from the United Kingdom and the Wider World

ERIC Educational Resources Information Center

Potts, David

2008-01-01

The government increased the funding for regional development agencies to 2.3 billion British Pounds in 2007/8, yet hard evidence on the effectiveness of the spending is difficult to find. Techniques for valuing benefits in difficult areas have existed for many years. They range from the hedonic methods and contingent valuation studies of…

Motivation to Study Core French: Comparing Recent Immigrants and Canadian-Born Secondary School Students

ERIC Educational Resources Information Center

Mady, Callie J.

2010-01-01

As the number of Allophone students attending public schools in Canada continues to increase (Statistics Canada, 2008), it is clear that a need exists in English-dominant areas to purposefully address the integration of these students into core French. I report the findings of a mixed-method study that was conducted to assess and compare the…

Creating Abbreviated Rating Scales to Monitor Classroom Inattention-Overactivity, Aggression, and Peer Conflict: Reliability, Validity, and Treatment Sensitivity

ERIC Educational Resources Information Center

Volpe, Robert J.; Gadow, Kenneth D.

2010-01-01

Rating scales developed to measure child emotional and behavioral problems typically are so long as to make their use in progress monitoring impractical in typical school settings. This study examined two methods of selecting items from existing rating scales to create shorter instruments for use in assessing response to intervention. The…

Ready or Not? Assessing Change Readiness for Implementation of the Geospatial Technology Competency Model[c

ERIC Educational Resources Information Center

Annulis, Heather M.; Gaudet, Cyndi H.

2007-01-01

A shortage of a qualified and skilled workforce exists to meet the demands of the geospatial industry (NASA, 2002). Solving today's workforce issues requires new and innovative methods and techniques for this high growth, high technology industry. One tool to support workforce development is a competency model which can be used to build a…

Adapting the Community of Inquiry Survey for an Online Graduate Program: Implications for Online Programs

ERIC Educational Resources Information Center

Kumar, Swapna; Ritzhaupt, Albert D.

2014-01-01

A cohort-based online professional doctorate program that consisted of both online coursework and research activities was designed using Garrison et al's community of inquiry (CoI) framework. The evaluation of the program proved a challenge because all existing CoI assessment methods in the past have dealt with online courses, not with online…

Assessing non-uniqueness: An algebraic approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vasco, Don W.

Geophysical inverse problems are endowed with a rich mathematical structure. When discretized, most differential and integral equations of interest are algebraic (polynomial) in form. Techniques from algebraic geometry and computational algebra provide a means to address questions of existence and uniqueness for both linear and non-linear inverse problem. In a sense, the methods extend ideas which have proven fruitful in treating linear inverse problems.

Internet Use in Aphasia: A Case Study Viewed through the International Classification of Functioning, Disability, and Health

ERIC Educational Resources Information Center

Menger, Fion; Morris, Julie; Salis, Christos

2017-01-01

Purpose: This article uses an illustrative case example to discuss a means of producing a holistic profile of Internet use for individuals with aphasia. Methods: The authors used the International Classification of Functioning, Disability, and Health as a framework to select novel and existing assessments to explore the Internet use and skills of…

A Direct Assessment of “Obesogenic” Built Environments: Challenges and Recommendations

PubMed Central

Gasevic, Danijela; Vukmirovich, Ina; Yusuf, Salim; Teo, Koon; Chow, Clara; Dagenais, Gilles; Lear, Scott A.

2011-01-01

This paper outlines the challenges faced during direct built environment (BE) assessments of 42 Canadian communities of various income and urbanization levels. In addition, we recommend options for overcoming such challenges during BE community assessments. Direct BE assessments were performed utilizing two distinct audit methods: (1) modified version of Irvine-Minnesota Inventory in which a paper version of an audit tool was used to assess BE features and (2) a Physical Activity and Nutrition Features audit tool, where the presence and positions of all environmental features of interest were recorded using a Global-Positioning-System (GPS) unit. This paper responds to the call for the need of creators and users of environmental audit tools to share experiences regarding the usability of tools for BE assessments. The outlined BE assessment challenges plus recommendations for overcoming them can help improve and refine the existing audit tools and aid researchers in future assessments of the BE. PMID:22174727

Developing a Performance Assessment Framework and Indicators for Communicable Disease Management in Natural Disasters.

PubMed

Babaie, Javad; Ardalan, Ali; Vatandoost, Hasan; Goya, Mohammad Mehdi; Akbarisari, Ali

2016-02-01

Communicable disease management (CDM) is an important component of disaster public health response operations. However, there is a lack of any performance assessment (PA) framework and related indicators for the PA. This study aimed to develop a PA framework and indicators in CDM in disasters. In this study, a series of methods were used. First, a systematic literature review (SLR) was performed in order to extract the existing PA frameworks and indicators. Then, using a qualitative approach, some interviews with purposively selected experts were conducted and used in developing the PA framework and indicators. Finally, the analytical hierarchy process (AHP) was used for weighting of the developed indicators. The input, process, products, and outcomes (IPPO) framework was found to be an appropriate framework for CDM PA. Seven main functions were revealed to CDM during disasters. Forty PA indicators were developed for the four categories. There is a lack of any existing PA framework in CDM in disasters. Thus, in this study, a PA framework (IPPO framework) was developed for the PA of CDM in disasters through a series of methods. It can be an appropriate framework and its indicators could measure the performance of CDM in disasters.

[Disinfecting contact tonometers - a systematic review].

PubMed

Neubauer, A S; Heeg, P; Kampik, A; Hirneiss, C

2009-05-01

The aim of this study is to provide the best available evidence on how to disinfect contact Goldman tonometers. A systematic review of all articles on disinfection of contact tonometers was conducted. Articles published up to July 2008 were identified in Medline, Embase and references from included articles. Two observers participated in the data retrieval and assessment of the studies identified. A total of 89 articles was retrieved, of which 58 could be included. Of those, 18 were clinical studies, 17 experimental microbiological studies, 8 expert assessments or guidelines and 15 reviews, surveys, descriptions of new methods. The clinical studies illustrate the importance of the problem, possible side effects of some disinfection methods but yield inconclusive results regarding efficacy. Experimental studies investigated a variety of bacterial and virological questions as well as material damage by disinfection. Both chlorine-based and hydrogen peroxide-based liquid disinfection were shown to be effective if applied for 5 min. Inconsistent results exist for alcohol wipes and UV disinfection - material damage has been described for both. The US guidelines and most expert recommendations are supported by evidence of the existing data. Chlorine-based and hydrogen peroxide-based liquid disinfections for 5 minutes are effective and relatively safe for disinfecting contact tonometers.

Current management of overactive bladder.

PubMed

Cartwright, Rufus; Renganathan, Arasee; Cardozo, Linda

2008-10-01

The concept of overactive bladder has helped us address the problem of urgency and urge incontinence from a symptomatic perspective. In this review, we provide a critical summary of clinically relevant recent publications, focusing in particular on advances in our understanding of assessment methods and therapeutic interventions for overactive bladder in women. According to current definitions, the prevalence of overactive bladder in western nations is now estimated as 13.0%. Although the prevalence increases with age, the symptoms of overactive bladder may follow a relapsing and remitting course. There has been a proliferation of validated symptom and quality of life measures and increasing sophistication in the analysis of bladder diaries. The role of urodynamics in the evaluation of urgency remains uncertain, with many trials showing limited benefit as a preoperative investigation. Fluid restriction and bladder retraining remain important first-line interventions. Many new anticholinergic medications have been licensed, with limited benefits compared with existing preparations. Intravesical botulinum toxin has become a popular alternative for patients who fail oral therapies. Although there have been few important therapeutic innovations, recent publications have led to greater sophistication in assessment methods and a clearer understanding of the role of existing interventions.

The Impact of Symptoms and Impairments on Overall Health in US National Health Data

PubMed Central

Stewart, Susan T.; Woodward, Rebecca M.; Rosen, Allison B.; Cutler, David M.

2015-01-01

Objective To assess the effects on overall self-rated health of the broad range of symptoms and impairments that are routinely asked about in national surveys. Data We use data from adults in the nationally representative Medical Expenditure Panel Survey (MEPS) 2002 with validation in an independent sample from MEPS 2000. Methods Regression analysis is used to relate impairments and symptoms to a 100-point self-rating of general health status. The effect of each impairment and symptom on health-related quality of life (HRQOL) is estimated from regression coefficients, accounting for interactions between them. Results Impairments and symptoms most strongly associated with overall health include pain, self-care limitations, and having little or no energy. The most prevalent are moderate pain, severe anxiety, moderate depressive symptoms, and low energy. Effects are stable across different waves of MEPS, and questions cover a broader range of impairments and symptoms than existing health measurement instruments. Conclusions This method makes use of the rich detail on impairments and symptoms in existing national data, quantifying their independent effects on overall health. Given the ongoing availability of these data and the shortcomings of traditional utility methods, it would be valuable to compare existing HRQOL measures to other methods, such as the one presented herein, for use in tracking population health over time. PMID:18725850

A Novel Method to Evaluate the Community Built Environment Using Photographs – Environmental Profile of a Community Health (EPOCH) Photo Neighbourhood Evaluation Tool

PubMed Central

Chow, Clara K.; Corsi, Daniel J.; Lock, Karen; Madhavan, Manisha; Mackie, Pam; Li, Wei; Yi, Sun; Wang, Yang; Swaminathan, Sumathi; Lopez-Jaramillo, Patricio; Gomez-Arbelaez, Diego; Avezum, Álvaro; Lear, Scott A.; Dagenais, Gilles; Teo, Koon; McKee, Martin; Yusuf, Salim

2014-01-01

Background Previous research has shown that environments with features that encourage walking are associated with increased physical activity. Existing methods to assess the built environment using geographical information systems (GIS) data, direct audit or large surveys of the residents face constraints, such as data availability and comparability, when used to study communities in countries in diverse parts of the world. The aim of this study was to develop a method to evaluate features of the built environment of communities using a standard set of photos. In this report we describe the method of photo collection, photo analysis instrument development and inter-rater reliability of the instrument. Methods/Principal Findings A minimum of 5 photos were taken per community in 86 communities in 5 countries according to a standard set of instructions from a designated central point of each community by researchers at each site. A standard pro forma derived from reviewing existing instruments to assess the built environment was developed and used to score the characteristics of each community. Photo sets from each community were assessed independently by three observers in the central research office according to the pro forma and the inter-rater reliability was compared by intra-class correlation (ICC). Overall 87% (53 of 60) items had an ICC of ≥0.70, 7% (4 of 60) had an ICC between 0.60 and 0.70 and 5% (3 of 60) items had an ICC ≤0.50. Conclusions/Significance Analysis of photos using a standardized protocol as described in this study offers a means to obtain reliable and reproducible information on the built environment in communities in very diverse locations around the world. The collection of the photographic data required minimal training and the analysis demonstrated high reliability for the majority of items of interest. PMID:25369366

Shifting attention from objective risk factors to patients' self-assessed health resources: a clinical model for general practice.

PubMed

Hollnagel, H; Malterud, K

1995-12-01

The study was designed to present and apply theoretical and empirical knowledge for the construction of a clinical model intended to shift the attention of the general practitioner from objective risk factors to self-assessed health resources in male and female patients. Review, discussion and analysis of selected theoretical models about personal health resources involving assessing existing theories according to their emphasis concerning self-assessed vs. doctor-assessed health resources, specific health resources vs. life and coping in general, abstract vs. clinically applicable theory, gender perspective explicitly included or not. Relevant theoretical models on health and coping (salutogenesis, coping and social support, control/demand, locus of control, health belief model, quality of life), and the perspective of the underprivileged Other (critical theory, feminist standpoint theory, the patient-centred clinical method) were presented and assessed. Components from Antonovsky's salutogenetic perspective and McWhinney's patient-centred clinical method, supported by gender perspectives, were integrated to a clinical model which is presented. General practitioners are recommended to shift their attention from objective risk factors to self-assessed health resources by means of the clinical model. The relevance and feasibility of the model should be explored in empirical research.

Quality of service provision assessment in the healthcare information and telecommunications infrastructures.

PubMed

Babulak, Eduard

2006-01-01

The continuous increase in the complexity and the heterogeneity of corporate and healthcare telecommunications infrastructures will require new assessment methods of quality of service (QoS) provision that are capable of addressing all engineering and social issues with much faster speeds. Speed and accessibility to any information at any time from anywhere will create global communications infrastructures with great performance bottlenecks that may put in danger human lives, power supplies, national economy and security. Regardless of the technology supporting the information flows, the final verdict on the QoS is made by the end user. The users' perception of telecommunications' network infrastructure QoS provision is critical to the successful business management operation of any organization. As a result, it is essential to assess the QoS Provision in the light of user's perception. This article presents a cost effective methodology to assess the user's perception of quality of service provision utilizing the existing Staffordshire University Network (SUN) by adding a component of measurement to the existing model presented by Walker. This paper presents the real examples of CISCO Networking Solutions for Health Care givers and offers a cost effective approach to assess the QoS provision within the campus network, which could be easily adapted to any health care organization or campus network in the world.

Quantification of ETS exposure in hospitality workers who have never smoked.

PubMed

Kolb, Stefanie; Brückner, Ulrike; Nowak, Dennis; Radon, Katja

2010-08-12

Environmental Tobacco Smoke (ETS) was classified as human carcinogen (K1) by the German Research Council in 1998. According to epidemiological studies, the relative risk especially for lung cancer might be twice as high in persons who have never smoked but who are in the highest exposure category, for example hospitality workers. In order to implement these results in the German regulations on occupational illnesses, a valid method is needed to retrospectively assess the cumulative ETS exposure in the hospitality environment. A literature-based review was carried out to locate a method that can be used for the German hospitality sector. Studies assessing ETS exposure using biological markers (for example urinary cotinine, DNA adducts) or questionnaires were excluded. Biological markers are not considered relevant as they assess exposure only over the last hours, weeks or months. Self-reported exposure based on questionnaires also does not seem adequate for medico-legal purposes. Therefore, retrospective exposure assessment should be based on mathematical models to approximate past exposure. For this purpose a validated model developed by Repace and Lowrey was considered appropriate. It offers the possibility of retrospectively assessing exposure with existing parameters (such as environmental dimensions, average number of smokers, ventilation characteristics and duration of exposure). The relative risk of lung cancer can then be estimated based on the individual cumulative exposure of the worker. In conclusion, having adapted it to the German hospitality sector, an existing mathematical model appears to be capable of approximating the cumulative exposure. However, the level of uncertainty of these approximations has to be taken into account, especially for diseases with a long latency period such as lung cancer.

Methodologies for semiquantitative evaluation of hip osteoarthritis by magnetic resonance imaging: approaches based on the whole organ and focused on active lesions.

PubMed

Jaremko, Jacob L; Lambert, Robert G W; Zubler, Veronika; Weber, Ulrich; Loeuille, Damien; Roemer, Frank W; Cibere, Jolanda; Pianta, Marcus; Gracey, David; Conaghan, Philip; Ostergaard, Mikkel; Maksymowych, Walter P

2014-02-01

As a wider variety of therapeutic options for osteoarthritis (OA) becomes available, there is an increasing need to objectively evaluate disease severity on magnetic resonance imaging (MRI). This is more technically challenging at the hip than at the knee, and as a result, few systematic scoring systems exist. The OMERACT (Outcome Measures in Rheumatology) filter of truth, discrimination, and feasibility can be used to validate image-based scoring systems. Our objective was (1) to review the imaging features relevant to the assessment of severity and progression of hip OA; and (2) to review currently used methods to grade these features in existing hip OA scoring systems. A systematic literature review was conducted. MEDLINE keyword search was performed for features of arthropathy (such as hip + bone marrow edema or lesion, synovitis, cyst, effusion, cartilage, etc.) and scoring system (hip + OA + MRI + score or grade), with a secondary manual search for additional references in the retrieved publications. Findings relevant to the severity of hip OA include imaging markers associated with inflammation (bone marrow lesion, synovitis, effusion), structural damage (cartilage loss, osteophytes, subchondral cysts, labral tears), and predisposing geometric factors (hip dysplasia, femoral-acetabular impingement). Two approaches to the semiquantitative assessment of hip OA are represented by Hip OA MRI Scoring System (HOAMS), a comprehensive whole organ assessment of nearly all findings, and the Hip Inflammation MRI Scoring System (HIMRISS), which selectively scores only active lesions (bone marrow lesion, synovitis/effusion). Validation is presently confined to limited assessment of reliability. Two methods for semiquantitative assessment of hip OA on MRI have been described and validation according to the OMERACT Filter is limited to evaluation of reliability.

Accounting for ecosystem services in life cycle assessment, Part I: a critical review.

PubMed

Zhang, Yi; Singh, Shweta; Bakshi, Bhavik R

2010-04-01

If life cycle oriented methods are to encourage sustainable development, they must account for the role of ecosystem goods and services, since these form the basis of planetary activities and human well-being. This article reviews methods that are relevant to accounting for the role of nature and that could be integrated into life cycle oriented approaches. These include methods developed by ecologists for quantifying ecosystem services, by ecological economists for monetary valuation, and life cycle methods such as conventional life cycle assessment, thermodynamic methods for resource accounting such as exergy and emergy analysis, variations of the ecological footprint approach, and human appropriation of net primary productivity. Each approach has its strengths: economic methods are able to quantify the value of cultural services; LCA considers emissions and assesses their impact; emergy accounts for supporting services in terms of cumulative exergy; and ecological footprint is intuitively appealing and considers biocapacity. However, no method is able to consider all the ecosystem services, often due to the desire to aggregate all resources in terms of a single unit. This review shows that comprehensive accounting for ecosystem services in LCA requires greater integration among existing methods, hierarchical schemes for interpreting results via multiple levels of aggregation, and greater understanding of the role of ecosystems in supporting human activities. These present many research opportunities that must be addressed to meet the challenges of sustainability.

A Framework for Quantitative Assessment of Impacts Related to Energy and Mineral Resource Development

DOE PAGES

Haines, Seth S.; Diffendorfer, Jay E.; Balistrieri, Laurie; ...

2013-05-15

Natural resource planning at all scales demands methods for assessing the impacts of resource development and use, and in particular it requires standardized methods that yield robust and unbiased results. Building from existing probabilistic methods for assessing the volumes of energy and mineral resources, we provide an algorithm for consistent, reproducible, quantitative assessment of resource development impacts. The approach combines probabilistic input data with Monte Carlo statistical methods to determine probabilistic outputs that convey the uncertainties inherent in the data. For example, one can utilize our algorithm to combine data from a natural gas resource assessment with maps of sagemore » grouse leks and pinon-juniper woodlands in the same area to estimate possible future habitat impacts due to possible future gas development. As another example: one could combine geochemical data and maps of lynx habitat with data from a mineral deposit assessment in the same area to determine possible future mining impacts on water resources and lynx habitat. The approach can be applied to a broad range of positive and negative resource development impacts, such as water quantity or quality, economic benefits, or air quality, limited only by the availability of necessary input data and quantified relationships among geologic resources, development alternatives, and impacts. In conclusion, the framework enables quantitative evaluation of the trade-offs inherent in resource management decision-making, including cumulative impacts, to address societal concerns and policy aspects of resource development.« less

A framework for quantitative assessment of impacts related to energy and mineral resource development

USGS Publications Warehouse

Haines, Seth S.; Diffendorfer, James; Balistrieri, Laurie S.; Berger, Byron R.; Cook, Troy A.; Gautier, Donald L.; Gallegos, Tanya J.; Gerritsen, Margot; Graffy, Elisabeth; Hawkins, Sarah; Johnson, Kathleen; Macknick, Jordan; McMahon, Peter; Modde, Tim; Pierce, Brenda; Schuenemeyer, John H.; Semmens, Darius; Simon, Benjamin; Taylor, Jason; Walton-Day, Katherine

2013-01-01

Natural resource planning at all scales demands methods for assessing the impacts of resource development and use, and in particular it requires standardized methods that yield robust and unbiased results. Building from existing probabilistic methods for assessing the volumes of energy and mineral resources, we provide an algorithm for consistent, reproducible, quantitative assessment of resource development impacts. The approach combines probabilistic input data with Monte Carlo statistical methods to determine probabilistic outputs that convey the uncertainties inherent in the data. For example, one can utilize our algorithm to combine data from a natural gas resource assessment with maps of sage grouse leks and piñon-juniper woodlands in the same area to estimate possible future habitat impacts due to possible future gas development. As another example: one could combine geochemical data and maps of lynx habitat with data from a mineral deposit assessment in the same area to determine possible future mining impacts on water resources and lynx habitat. The approach can be applied to a broad range of positive and negative resource development impacts, such as water quantity or quality, economic benefits, or air quality, limited only by the availability of necessary input data and quantified relationships among geologic resources, development alternatives, and impacts. The framework enables quantitative evaluation of the trade-offs inherent in resource management decision-making, including cumulative impacts, to address societal concerns and policy aspects of resource development.

Testing actinide fission yield treatment in CINDER90 for use in MCNP6 burnup calculations

DOE PAGES

Fensin, Michael Lorne; Umbel, Marissa

2015-09-18

Most of the development of the MCNPX/6 burnup capability focused on features that were applied to the Boltzman transport or used to prepare coefficients for use in CINDER90, with little change to CINDER90 or the CINDER90 data. Though a scheme exists for best solving the coupled Boltzman and Bateman equations, the most significant approximation is that the employed nuclear data are correct and complete. Thus, the CINDER90 library file contains 60 different actinide fission yields encompassing 36 fissionable actinides (thermal, fast, high energy and spontaneous fission). Fission reaction data exists for more than 60 actinides and as a result, fissionmore » yield data must be approximated for actinides that do not possess fission yield information. Several types of approximations are used for estimating fission yields for actinides which do not possess explicit fission yield data. The objective of this study is to test whether or not certain approximations of fission yield selection have any impact on predictability of major actinides and fission products. Further we assess which other fission products, available in MCNP6 Tier 3, result in the largest difference in production. Because the CINDER90 library file is in ASCII format and therefore easily amendable, we assess reasons for choosing, as well as compare actinide and major fission product prediction for the H. B. Robinson benchmark for, three separate fission yield selection methods: (1) the current CINDER90 library file method (Base); (2) the element method (Element); and (3) the isobar method (Isobar). Results show that the three methods tested result in similar prediction of major actinides, Tc-99 and Cs-137; however, certain fission products resulted in significantly different production depending on the method of choice.« less

What methods are used to apply positive deviance within healthcare organisations? A systematic review

PubMed Central

Baxter, Ruth; Taylor, Natalie; Kellar, Ian; Lawton, Rebecca

2016-01-01

Background The positive deviance approach focuses on those who demonstrate exceptional performance, despite facing the same constraints as others. ‘Positive deviants’ are identified and hypotheses about how they succeed are generated. These hypotheses are tested and then disseminated within the wider community. The positive deviance approach is being increasingly applied within healthcare organisations, although limited guidance exists and different methods, of varying quality, are used. This paper systematically reviews healthcare applications of the positive deviance approach to explore how positive deviance is defined, the quality of existing applications and the methods used within them, including the extent to which staff and patients are involved. Methods Peer-reviewed articles, published prior to September 2014, reporting empirical research on the use of the positive deviance approach within healthcare, were identified from seven electronic databases. A previously defined four-stage process for positive deviance in healthcare was used as the basis for data extraction. Quality assessments were conducted using a validated tool, and a narrative synthesis approach was followed. Results 37 of 818 articles met the inclusion criteria. The positive deviance approach was most frequently applied within North America, in secondary care, and to address healthcare-associated infections. Research predominantly identified positive deviants and generated hypotheses about how they succeeded. The approach and processes followed were poorly defined. Research quality was low, articles lacked detail and comparison groups were rarely included. Applications of positive deviance typically lacked staff and/or patient involvement, and the methods used often required extensive resources. Conclusion Further research is required to develop high quality yet practical methods which involve staff and patients in all stages of the positive deviance approach. The efficacy and efficiency of positive deviance must be assessed and compared with other quality improvement approaches. PROSPERO registration number CRD42014009365. PMID:26590198

A multi-objective assessment of an air quality monitoring network using environmental, economic, and social indicators and GIS-based models.

PubMed

Pope, Ronald; Wu, Jianguo

2014-06-01

In the United States, air pollution is primarily measured by Air Quality Monitoring Networks (AQMN). These AQMNs have multiple objectives, including characterizing pollution patterns, protecting the public health, and determining compliance with air quality standards. In 2006, the U.S. Environmental Protection Agency issued a directive that air pollution agencies assess the performance of their AQMNs. Although various methods to design and assess AQMNs exist, here we demonstrate a geographic information system (GIS)-based approach that combines environmental, economic, and social indicators through the assessment of the ozone (O3) and particulate matter (PM10) networks in Maricopa County, Arizona. The assessment was conducted in three phases: (1) to evaluate the performance of the existing networks, (2) to identify areas that would benefit from the addition of new monitoring stations, and (3) to recommend changes to the AQMN. A comprehensive set of indicators was created for evaluating differing aspects of the AQMNs' objectives, and weights were applied to emphasize important indicators. Indicators were also classified according to their sustainable development goal. Our results showed that O3 was well represented in the county with some redundancy in terms of the urban monitors. The addition of weights to the indicators only had a minimal effect on the results. For O3, urban monitors had greater social scores, while rural monitors had greater environmental scores. The results did not suggest a need for adding more O3 monitoring sites. For PM10, clustered urban monitors were redundant, and weights also had a minimal effect on the results. The clustered urban monitors had overall low scores; sites near point sources had high environmental scores. Several areas were identified as needing additional PM10 monitors. This study demonstrates the usefulness of a multi-indicator approach to assess AQMNs. Network managers and planners may use this method to assess the performance of air quality monitoring networks in urban regions. The U.S. Environmental Protection Agency issued a directive in 2006 that air pollution agencies assess the performance of their AQMNs; as a result, we developed a GIS-based, multi-objective assessment approach that integrates environmental, economic, and social indicators, and demonstrates its use through assessing the O3 and PM10 monitoring networks in the Phoenix metropolitan area. We exhibit a method of assessing network performance and identifying areas that would benefit from new monitoring stations; also, we demonstrate the effect of adding weights to the indicators. Our study shows that using a multi-indicator approach gave detailed assessment results for the Phoenix AQMN.

Can mixed assessment methods make biology classes more equitable?

PubMed

Cotner, Sehoya; Ballen, Cissy J

2017-01-01

Many factors have been proposed to explain the attrition of women in science, technology, engineering and math fields, among them the lower performance of women in introductory courses resulting from deficits in incoming preparation. We focus on the impact of mixed methods of assessment, which minimizes the impact of high-stakes exams and rewards other methods of assessment such as group participation, low-stakes quizzes and assignments, and in-class activities. We hypothesized that these mixed methods would benefit individuals who otherwise underperform on high-stakes tests. Here, we analyze gender-based performance trends in nine large (N > 1000 students) introductory biology courses in fall 2016. Females underperformed on exams compared to their male counterparts, a difference that does not exist with other methods of assessment that compose course grade. Further, we analyzed three case studies of courses that transitioned their grading schemes to either de-emphasize or emphasize exams as a proportion of total course grade. We demonstrate that the shift away from an exam emphasis consequently benefits female students, thereby closing gaps in overall performance. Further, the exam performance gap itself is reduced when the exams contribute less to overall course grade. We discuss testable predictions that follow from our hypothesis, and advocate for the use of mixed methods of assessments (possibly as part of an overall shift to active learning techniques). We conclude by challenging the student deficit model, and suggest a course deficit model as explanatory of these performance gaps, whereby the microclimate of the classroom can either raise or lower barriers to success for underrepresented groups in STEM.

Can mixed assessment methods make biology classes more equitable?

PubMed Central

Ballen, Cissy J.

2017-01-01

Many factors have been proposed to explain the attrition of women in science, technology, engineering and math fields, among them the lower performance of women in introductory courses resulting from deficits in incoming preparation. We focus on the impact of mixed methods of assessment, which minimizes the impact of high-stakes exams and rewards other methods of assessment such as group participation, low-stakes quizzes and assignments, and in-class activities. We hypothesized that these mixed methods would benefit individuals who otherwise underperform on high-stakes tests. Here, we analyze gender-based performance trends in nine large (N > 1000 students) introductory biology courses in fall 2016. Females underperformed on exams compared to their male counterparts, a difference that does not exist with other methods of assessment that compose course grade. Further, we analyzed three case studies of courses that transitioned their grading schemes to either de-emphasize or emphasize exams as a proportion of total course grade. We demonstrate that the shift away from an exam emphasis consequently benefits female students, thereby closing gaps in overall performance. Further, the exam performance gap itself is reduced when the exams contribute less to overall course grade. We discuss testable predictions that follow from our hypothesis, and advocate for the use of mixed methods of assessments (possibly as part of an overall shift to active learning techniques). We conclude by challenging the student deficit model, and suggest a course deficit model as explanatory of these performance gaps, whereby the microclimate of the classroom can either raise or lower barriers to success for underrepresented groups in STEM. PMID:29281676

Validity of Dietary Assessment in Athletes: A Systematic Review

PubMed Central

Beck, Kathryn L.; Gifford, Janelle A.; Slater, Gary; Flood, Victoria M.; O’Connor, Helen

2017-01-01

Dietary assessment methods that are recognized as appropriate for the general population are usually applied in a similar manner to athletes, despite the knowledge that sport-specific factors can complicate assessment and impact accuracy in unique ways. As dietary assessment methods are used extensively within the field of sports nutrition, there is concern the validity of methodologies have not undergone more rigorous evaluation in this unique population sub-group. The purpose of this systematic review was to compare two or more methods of dietary assessment, including dietary intake measured against biomarkers or reference measures of energy expenditure, in athletes. Six electronic databases were searched for English-language, full-text articles published from January 1980 until June 2016. The search strategy combined the following keywords: diet, nutrition assessment, athlete, and validity; where the following outcomes are reported but not limited to: energy intake, macro and/or micronutrient intake, food intake, nutritional adequacy, diet quality, or nutritional status. Meta-analysis was performed on studies with sufficient methodological similarity, with between-group standardized mean differences (or effect size) and 95% confidence intervals (CI) being calculated. Of the 1624 studies identified, 18 were eligible for inclusion. Studies comparing self-reported energy intake (EI) to energy expenditure assessed via doubly labelled water were grouped for comparison (n = 11) and demonstrated mean EI was under-estimated by 19% (−2793 ± 1134 kJ/day). Meta-analysis revealed a large pooled effect size of −1.006 (95% CI: −1.3 to −0.7; p < 0.001). The remaining studies (n = 7) compared a new dietary tool or instrument to a reference method(s) (e.g., food record, 24-h dietary recall, biomarker) as part of a validation study. This systematic review revealed there are limited robust studies evaluating dietary assessment methods in athletes. Existing literature demonstrates the substantial variability between methods, with under- and misreporting of intake being frequently observed. There is a clear need for careful validation of dietary assessment methods, including emerging technical innovations, among athlete populations. PMID:29207495

Partial corrosion casting to assess cochlear vasculature in mouse models of presbycusis and CMV infection.

PubMed

Carraro, Mattia; Park, Albert H; Harrison, Robert V

2016-02-01

Some forms of sensorineural hearing loss involve damage or degenerative changes to the stria vascularis and/or other vascular structures in the cochlea. In animal models, many methods for anatomical assessment of cochlear vasculature exist, each with advantages and limitations. One methodology, corrosion casting, has proved useful in some species, however in the mouse model this technique is difficult to achieve because digestion of non vascular tissue results in collapse of the delicate cast specimen. We have developed a partial corrosion cast method that allows visualization of vasculature along much of the cochlear length but maintains some structural integrity of the specimen. We provide a detailed step-by-step description of this novel technique. We give some illustrative examples of the use of the method in mouse models of presbycusis and cytomegalovirus (CMV) infection. Copyright © 2015 Elsevier B.V. All rights reserved.

Demonstration and evaluation of a method for assessing mediated moderation.

PubMed

Morgan-Lopez, Antonio A; MacKinnon, David P

2006-02-01

Mediated moderation occurs when the interaction between two variables affects a mediator, which then affects a dependent variable. In this article, we describe the mediated moderation model and evaluate it with a statistical simulation using an adaptation of product-of-coefficients methods to assess mediation. We also demonstrate the use of this method with a substantive example from the adolescent tobacco literature. In the simulation, relative bias (RB) in point estimates and standard errors did not exceed problematic levels of +/- 10% although systematic variability in RB was accounted for by parameter size, sample size, and nonzero direct effects. Power to detect mediated moderation effects appears to be severely compromised under one particular combination of conditions: when the component variables that make up the interaction terms are correlated and partial mediated moderation exists. Implications for the estimation of mediated moderation effects in experimental and nonexperimental research are discussed.

Depleted uranium contamination by inhalation exposure and its detection after approximately 20 years: implications for human health assessment.

PubMed

Parrish, Randall R; Horstwood, Matthew; Arnason, John G; Chenery, Simon; Brewer, Tim; Lloyd, Nicholas S; Carpenter, David O

2008-02-01

Inhaled depleted uranium (DU) aerosols are recognised as a distinct human health hazard and DU has been suggested to be responsible in part for illness in both military and civilian populations that may have been exposed. This study aimed to develop and use a testing procedure capable of detecting an individual's historic milligram-quantity aerosol exposure to DU up to 20 years after the event. This method was applied to individuals associated with or living proximal to a DU munitions plant in Colonie New York that were likely to have had a significant DU aerosol inhalation exposure, in order to improve DU-exposure screening reliability and gain insight into the residence time of DU in humans. We show using sensitive mass spectrometric techniques that when exposure to aerosol has been unambiguous and in sufficient quantity, urinary excretion of DU can be detected more than 20 years after primary DU inhalation contamination ceased, even when DU constitutes only approximately 1% of the total excreted uranium. It seems reasonable to conclude that a chronically DU-exposed population exists within the contamination 'footprint' of the munitions plant in Colonie, New York. The method allows even a modest DU exposure to be identified where other less sensitive methods would have failed entirely. This should allow better assessment of historical exposure incidence than currently exists.

The adenosine triphosphate method as a quality control tool to assess 'cleanliness' of frequently touched hospital surfaces.

PubMed

Knape, L; Hambraeus, A; Lytsy, B

2015-10-01

The adenosine triphosphate (ATP) method is widely accepted as a quality control method to complement visual assessment, in the specifications of requirements, when purchasing cleaning contractors in Swedish hospitals. To examine whether the amount of biological load, as measured by ATP on frequently touched near-patient surfaces, had been reduced after an intervention; to evaluate the correlation between visual assessment and ATP levels on the same surfaces; to identify aspects of the performance of the ATP method as a tool in evaluating hospital cleanliness. A prospective intervention study in three phases was carried out in a medical ward and an intensive care unit (ICU) at a regional hospital in mid-Sweden between 2012 and 2013. Existing cleaning procedures were defined and baseline tests were sampled by visual inspection and ATP measurements of ten frequently touched surfaces in patients' rooms before and after intervention. The intervention consisted of educating nursing staff about the importance of hospital cleaning and direct feedback of ATP levels before and after cleaning. The mixed model showed a significant decrease in ATP levels after the intervention (P < 0.001). Relative light unit values were lower in the ICU. Cleanliness as judged by visual assessments improved. In the logistic regression analysis, there was a significant association between visual assessments and ATP levels. Direct feedback of ATP levels, together with education and introduction of written cleaning protocols, were effective tools to improve cleanliness. Visual assessment correlated with the level of ATP but the correlation was not absolute. The ATP method could serve as an educational tool for staff, but is not enough to assess hospital cleanliness in general as only a limited part of a large area is covered. Copyright © 2015 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

3D motion and strain estimation of the heart: initial clinical findings

NASA Astrophysics Data System (ADS)

Barbosa, Daniel; Hristova, Krassimira; Loeckx, Dirk; Rademakers, Frank; Claus, Piet; D'hooge, Jan

2010-03-01

The quantitative assessment of regional myocardial function remains an important goal in clinical cardiology. As such, tissue Doppler imaging and speckle tracking based methods have been introduced to estimate local myocardial strain. Recently, volumetric ultrasound has become more readily available, allowing therefore the 3D estimation of motion and myocardial deformation. Our lab has previously presented a method based on spatio-temporal elastic registration of ultrasound volumes to estimate myocardial motion and deformation in 3D, overcoming the spatial limitations of the existing methods. This method was optimized on simulated data sets in previous work and is currently tested in a clinical setting. In this manuscript, 10 healthy volunteers, 10 patient with myocardial infarction and 10 patients with arterial hypertension were included. The cardiac strain values extracted with the proposed method were compared with the ones estimated with 1D tissue Doppler imaging and 2D speckle tracking in all patient groups. Although the absolute values of the 3D strain components assessed by this new methodology were not identical to the reference methods, the relationship between the different patient groups was similar.

Virtual reality treatment and assessments for post-stroke unilateral spatial neglect: A systematic literature review.

PubMed

Ogourtsova, Tatiana; Souza Silva, Wagner; Archambault, Philippe S; Lamontagne, Anouk

2017-04-01

Unilateral spatial neglect (USN) is a highly prevalent post-stroke deficit. Currently, there is no gold standard USN assessment which encompasses the heterogeneity of this disorder and that is sensitive to detect mild deficits. Similarly, there is a limited number of high quality studies suggesting that conventional USN treatments are effective in improving functional outcomes and reducing disability. Virtual reality (VR) provides enhanced methods for USN assessment and treatment. To establish best-practice recommendations with respect to its use, it is necessary to appraise the existing evidence. This systematic review aimed to identify and appraise existing VR-based USN assessments; and to determine whether VR is more effective than conventional therapy. Assessment tools were critically appraised using standard criteria. The methodological quality of the treatment trials was rated by two authors. The level of evidence according to stage of recovery was determined. Findings were compiled into a VR-based USN Assessment and Treatment Toolkit (VR-ATT). Twenty-three studies were identified. The proposed VR tools augmented the conventional assessment strategies. However, most studies lacked analysis of psychometric properties. There is limited evidence that VR is more effective than conventional therapy in improving USN symptoms in patients with stroke. It was concluded that VR-ATT could facilitate identification and decision-making as to the appropriateness of VR-based USN assessments and treatments across the continuum of stroke care, but more evidence is required on treatment effectiveness.

Assessing the representativeness of wind data for wind turbine site evaluation

NASA Technical Reports Server (NTRS)

Renne, D. S.; Corotis, R. B.

1982-01-01

Once potential wind turbine sites (either for single installations or clusters) are identified through siting procedures, actual evaluation of the sites must commence. This evaluation is needed to obtain estimates of wind turbine performance and to identify hazards to the machine from the turbulence component of the atmosphere. These estimates allow for more detailed project planning and for preliminary financing arrangements to be secured. The site evaluation process can occur in two stages: (1) utilizing existing nearby data, and (2) establishing and monitoring an onsite measurement program. Since step (2) requires a period of at least 1 yr or more from the time a potential site has been identified, step (1) is often an essential stage in the preliminary evaluation process. Both the methods that have been developed and the unknowns that still exist in assessing the representativeness of available data to a nearby wind turbine site are discussed. How the assessment of the representativeness of available data can be used to develop a more effective onsite meteorological measurement program is also discussed.

Overview of the Aeroelastic Prediction Workshop

NASA Technical Reports Server (NTRS)

Heeg, Jennifer; Chwalowski, Pawel; Schuster, David M.; Dalenbring, Mats

2013-01-01

The AIAA Aeroelastic Prediction Workshop (AePW) was held in April, 2012, bringing together communities of aeroelasticians and computational fluid dynamicists. The objective in conducting this workshop on aeroelastic prediction was to assess state-of-the-art computational aeroelasticity methods as practical tools for the prediction of static and dynamic aeroelastic phenomena. No comprehensive aeroelastic benchmarking validation standard currently exists, greatly hindering validation and state-of-the-art assessment objectives. The workshop was a step towards assessing the state of the art in computational aeroelasticity. This was an opportunity to discuss and evaluate the effectiveness of existing computer codes and modeling techniques for unsteady flow, and to identify computational and experimental areas needing additional research and development. Three configurations served as the basis for the workshop, providing different levels of geometric and flow field complexity. All cases considered involved supercritical airfoils at transonic conditions. The flow fields contained oscillating shocks and in some cases, regions of separation. The computational tools principally employed Reynolds-Averaged Navier Stokes solutions. The successes and failures of the computations and the experiments are examined in this paper.

New approaches in assessing food intake in epidemiology.

PubMed

Conrad, Johanna; Koch, Stefanie A J; Nöthlings, Ute

2018-06-22

A promising direction for improving dietary intake measurement in epidemiologic studies is the combination of short-term and long-term dietary assessment methods using statistical methods. Thereby, web-based instruments are particularly interesting as their application offers several potential advantages such as self-administration and a shorter completion time. The objective of this review is to provide an overview of new web-based short-term instruments and to describe their features. A number of web-based short-term dietary assessment tools for application in different countries and age-groups have been developed so far. Particular attention should be paid to the underlying database and the search function of the tool. Moreover, web-based instruments can improve the estimation of portion sizes by offering several options to the user. Web-based dietary assessment methods are associated with lower costs and reduced burden for participants and researchers, and show a comparable validity with traditional instruments. When there is a need for a web-based tool researcher should consider the adaptation of existing tools rather than developing new instruments. The combination of short-term and long-term instruments seems more feasible with the use of new technology.

A new method to assess damage to RCMRFs from period elongation and Park-Ang damage index using IDA

NASA Astrophysics Data System (ADS)

Aghagholizadeh, Mehrdad; Massumi, Ali

2016-09-01

Despite a significant progress in loading and design codes of seismic resistant structures and technology improvements in building structures, the field of civil engineering is still facing critical challenges. An example of those challenges is the assessment of the state of damage that has been imposed to a structure after earthquakes of different intensities. To determine the operability of a structure and its resistance to probable future earthquakes, quick assessment of damages and determining the operability of a structure after an earthquake are crucial. Present methods to calculate damage to structures are time consuming and do not accurately provide the rate of damage. Damage estimation is important task in the fields of structural health monitoring and decision-making. This study examines the relationship between period elongation and the Park-Ang damage index. A dynamic non-linear analysis is employed with IDARC program to calculate the amount of damage and period of the current state. This new method is shown to be a quick and accurate technique for damage assessment. It is easy to calculate the period of an existing structure and changes in the period which reflects changes in the stiffness matrix.

Educating residents for managed care: report on a multidisciplinary conference.

PubMed

Hewson, M G; Fishleder, A J; Halperin, A K; Henry, C A; Isaacson, J H; Kachur, E; Tresolini, C

1998-05-01

A growing number of residency programs are preparing their graduates for the realities of managed care practice. In 1996, The Cleveland Clinic Foundation, a private, nonprofit academic medical center, hosted a two-day conference on managed care education to develop innovative instructional and evaluative approaches that, where appropriate, would build on existing expertise. The conference was attended by invited national experts who had a stake in residents' education: clinical faculty, residents, medical educators, executives of managed care organizations, and representatives of other interested organizations. Participants spent much of their time in four small break out groups, each focusing on one of the following topics that were judged particularly relevant to managed care: preventive and population-based medicine, appropriate utilization of resources, clinician-patient communication, and interdisciplinary team practice. Participants shared existing materials, discussed teaching goals and objectives, and generated ideas for teaching methods, teaching materials, and evaluative methods for their respective topics. The authors summarize the recommendations from the four groups, with an overview of the issues that emerged during the conference concerning curriculum development, integration of managed care topics into existing curricula, staging of the curriculum, experiential teaching methods, negative attitudes and resistance, evaluation of trainees and profiling, program assessment, faculty development, and cooperation between academic medical centers and managed care organizations.

Assessment of the transportation route of oversize and excessive loads in relation to the load-bearing capacity of existing bridges

NASA Astrophysics Data System (ADS)

Doležel, Jiří; Novák, Drahomír; Petrů, Jan

2017-09-01

Transportation routes of oversize and excessive loads are currently planned in relation to ensure the transit of a vehicle through critical points on the road. Critical points are level-intersection of roads, bridges etc. This article presents a comprehensive procedure to determine a reliability and a load-bearing capacity level of the existing bridges on highways and roads using the advanced methods of reliability analysis based on simulation techniques of Monte Carlo type in combination with nonlinear finite element method analysis. The safety index is considered as a main criterion of the reliability level of the existing construction structures and the index is described in current structural design standards, e.g. ISO and Eurocode. An example of a single-span slab bridge made of precast prestressed concrete girders of the 60 year current time and its load bearing capacity is set for the ultimate limit state and serviceability limit state. The structure’s design load capacity was estimated by the full probability nonlinear MKP analysis using a simulation technique Latin Hypercube Sampling (LHS). Load-bearing capacity values based on a fully probabilistic analysis are compared with the load-bearing capacity levels which were estimated by deterministic methods of a critical section of the most loaded girders.

D Reconstruction from Multi-View Medical X-Ray Images - Review and Evaluation of Existing Methods

NASA Astrophysics Data System (ADS)

Hosseinian, S.; Arefi, H.

2015-12-01

The 3D concept is extremely important in clinical studies of human body. Accurate 3D models of bony structures are currently required in clinical routine for diagnosis, patient follow-up, surgical planning, computer assisted surgery and biomechanical applications. However, 3D conventional medical imaging techniques such as computed tomography (CT) scan and magnetic resonance imaging (MRI) have serious limitations such as using in non-weight-bearing positions, costs and high radiation dose(for CT). Therefore, 3D reconstruction methods from biplanar X-ray images have been taken into consideration as reliable alternative methods in order to achieve accurate 3D models with low dose radiation in weight-bearing positions. Different methods have been offered for 3D reconstruction from X-ray images using photogrammetry which should be assessed. In this paper, after demonstrating the principles of 3D reconstruction from X-ray images, different existing methods of 3D reconstruction of bony structures from radiographs are classified and evaluated with various metrics and their advantages and disadvantages are mentioned. Finally, a comparison has been done on the presented methods with respect to several metrics such as accuracy, reconstruction time and their applications. With regards to the research, each method has several advantages and disadvantages which should be considered for a specific application.

Space Launch System Mission Flexibility Assessment

NASA Technical Reports Server (NTRS)

Monk, Timothy; Holladay, Jon; Sanders, Terry; Hampton, Bryan

2012-01-01

The Space Launch System (SLS) is envisioned as a heavy lift vehicle that will provide the foundation for future beyond low Earth orbit (LEO) missions. While multiple assessments have been performed to determine the optimal configuration for the SLS, this effort was undertaken to evaluate the flexibility of various concepts for the range of missions that may be required of this system. These mission scenarios include single launch crew and/or cargo delivery to LEO, single launch cargo delivery missions to LEO in support of multi-launch mission campaigns, and single launch beyond LEO missions. Specifically, we assessed options for the single launch beyond LEO mission scenario using a variety of in-space stages and vehicle staging criteria. This was performed to determine the most flexible (and perhaps optimal) method of designing this particular type of mission. A specific mission opportunity to the Jovian system was further assessed to determine potential solutions that may meet currently envisioned mission objectives. This application sought to significantly reduce mission cost by allowing for a direct, faster transfer from Earth to Jupiter and to determine the order-of-magnitude mass margin that would be made available from utilization of the SLS. In general, smaller, existing stages provided comparable performance to larger, new stage developments when the mission scenario allowed for optimal LEO dropoff orbits (e.g. highly elliptical staging orbits). Initial results using this method with early SLS configurations and existing Upper Stages showed the potential of capturing Lunar flyby missions as well as providing significant mass delivery to a Jupiter transfer orbit.

Scan-To Output Validation: Towards a Standardized Geometric Quality Assessment of Building Information Models Based on Point Clouds

NASA Astrophysics Data System (ADS)

Bonduel, M.; Bassier, M.; Vergauwen, M.; Pauwels, P.; Klein, R.

2017-11-01

The use of Building Information Modeling (BIM) for existing buildings based on point clouds is increasing. Standardized geometric quality assessment of the BIMs is needed to make them more reliable and thus reusable for future users. First, available literature on the subject is studied. Next, an initial proposal for a standardized geometric quality assessment is presented. Finally, this method is tested and evaluated with a case study. The number of specifications on BIM relating to existing buildings is limited. The Levels of Accuracy (LOA) specification of the USIBD provides definitions and suggestions regarding geometric model accuracy, but lacks a standardized assessment method. A deviation analysis is found to be dependent on (1) the used mathematical model, (2) the density of the point clouds and (3) the order of comparison. Results of the analysis can be graphical and numerical. An analysis on macro (building) and micro (BIM object) scale is necessary. On macro scale, the complete model is compared to the original point cloud and vice versa to get an overview of the general model quality. The graphical results show occluded zones and non-modeled objects respectively. Colored point clouds are derived from this analysis and integrated in the BIM. On micro scale, the relevant surface parts are extracted per BIM object and compared to the complete point cloud. Occluded zones are extracted based on a maximum deviation. What remains is classified according to the LOA specification. The numerical results are integrated in the BIM with the use of object parameters.

Participatory methods for the assessment of the ownership status of free-roaming dogs in Bali, Indonesia, for disease control and animal welfare.

PubMed

Morters, M K; Bharadwaj, S; Whay, H R; Cleaveland, S; Damriyasa, I Md; Wood, J L N

2014-09-01

The existence of unowned, free-roaming dogs capable of maintaining adequate body condition without direct human oversight has serious implications for disease control and animal welfare, including reducing effective vaccination coverage against rabies through limiting access for vaccination, and absolving humans from the responsibility of providing adequate care for a domesticated species. Mark-recapture methods previously used to estimate the fraction of unowned dogs in free-roaming populations have limitations, particularly when most of the dogs are owned. We used participatory methods, described as Participatory Rural Appraisal (PRA), as a novel alternative to mark-recapture methods in two villages in Bali, Indonesia. PRA was implemented at the banjar (or sub-village)-level to obtain consensus on the food sources of the free-roaming dogs. Specific methods included semi-structured discussion, visualisation tools and ranking. The PRA results agreed with the preceding household surveys and direct observations, designed to evaluate the same variables, and confirmed that a population of unowned, free-roaming dogs in sufficiently good condition to be sustained independently of direct human support was unlikely to exist. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.