[Anaesthetic security: evolution of ideas].

PubMed

Cherif, Ali; Daghfous, Mounir; Saîdi, Yosri

2008-11-01

The concept of risk has not clear neither in the media nor in the medical field. It appears important to us to bring details relating some definitions in the field of anaesthesia safety. This work aims to clarify the concepts of safety, of risk in a medical activity like the Anaesthesia. A search was carried out on Medline with the following key words: Risk anaesthetic, anaesthetic Safety, anaesthetic mortality. The definitions of risk, of acceptable risk taking account of social and economic considerations are brought in this text. The ways to evaluate safety and the methods to achieve it was developed. The indicator of quality more used to evaluate safety is anaesthetic mortality. Many difficulties exist with the interpretation of data on mortality. The standards of care are normally established according to the degree of necessary safety. Concurrently to these standards exist certainly the human error which is a phenomenon towards which must direct all the efforts of improvement of safety but more especially the errors of system which are found regularly in the analysis of accidents and incident. The identification of the failures is the mandatory step to achieve safety.

78 FR 5055 - Pattern of Violations

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-23

...The Mine Safety and Health Administration (MSHA) is revising the Agency's existing regulation for pattern of violations (POV). MSHA has determined that the existing regulation does not adequately achieve the intent of the Federal Mine Safety and Health Act of 1977 (Mine Act) that the POV provision be used to address mine operators who have demonstrated a disregard for the health and safety of miners. Congress included the POV provision in the Mine Act so that mine operators would manage health and safety conditions at mines and find and fix the root causes of significant and substantial (S&S) violations, protecting the health and safety of miners. The final rule simplifies the existing POV criteria, improves consistency in applying the POV criteria, and more effectively achieves the Mine Act's statutory intent. It also encourages chronic safety violators to comply with the Mine Act and MSHA's health and safety standards.

75 FR 49536 - Petitions for Modification of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-13

... alternative method of achieving the result of such standard exists which will at all times guarantee no less... for inspection; (8) the proposed alternative method will not be implemented until miners who have been... training plans will apply. The petitioner asserts that the proposed alternative method will at all times...

78 FR 23308 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-18

... electrical condition of the slope conveyor system. (c) Immediate reporting of any hazards or mechanical... Affected: 30 CFR 75.1710-1(a)(4) (Canopies or cabs; self-propelled diesel-powered and electric face... existing standard to permit the use of shuttle cars without canopies in heights less than forty eight...

77 FR 27086 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-08

... data collectors. Other testing and diagnostic equipment may be used if approved in advance by MSHA's.... (6) Except for time necessary to troubleshoot under actual mining conditions, coal production in the... protection afforded by the existing standard. Docket Number: M-2012-063-C. Petitioner: Sebree Mining, LLC...

46 CFR 154.12 - Existing gas vessel: Endorsements and requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.12 Existing gas vessel: Endorsements and requirements. (a) Except an existing gas vessel under paragraph (b... 46 Shipping 5 2012-10-01 2012-10-01 false Existing gas vessel: Endorsements and requirements. 154...

46 CFR 154.12 - Existing gas vessel: Endorsements and requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.12 Existing gas vessel: Endorsements and requirements. (a) Except an existing gas vessel under paragraph (b... 46 Shipping 5 2014-10-01 2014-10-01 false Existing gas vessel: Endorsements and requirements. 154...

49 CFR 229.207 - New locomotive crashworthiness design standards and changes to existing FRA-approved locomotive...

Code of Federal Regulations, 2010 CFR

2010-10-01

... requirements of § 229.205 for the type of locomotive design or provides at least an equivalent level of safety... least an equivalent level of safety. Types of data and analysis to be considered are described in § 229.211(c)(1). (d) Petitions for FRA approval of non-substantive changes to the existing FRA-approved...

Patient Handoffs between Emergency Department and Inpatient Physicians: A Qualitative Study to Inform Standardization of Practice and Organization Theory

ERIC Educational Resources Information Center

Hilligoss, Phillip Brian

2011-01-01

This dissertation is motivated by two problems. First, existing literature characterizes patient handoff as an information transfer activity in which safety and quality are compromised by practice variation. This has prompted a movement to standardize practice. However, existing research has not closely examined how practice variations may be…

Companies' opinions and acceptance of global food safety initiative benchmarks after implementation.

PubMed

Crandall, Phil; Van Loo, Ellen J; O'Bryan, Corliss A; Mauromoustakos, Andy; Yiannas, Frank; Dyenson, Natalie; Berdnik, Irina

2012-09-01

International attention has been focused on minimizing costs that may unnecessarily raise food prices. One important aspect to consider is the redundant and overlapping costs of food safety audits. The Global Food Safety Initiative (GFSI) has devised benchmarked schemes based on existing international food safety standards for use as a unifying standard accepted by many retailers. The present study was conducted to evaluate the impact of the decision made by Walmart Stores (Bentonville, AR) to require their suppliers to become GFSI compliant. An online survey of 174 retail suppliers was conducted to assess food suppliers' opinions of this requirement and the benefits suppliers realized when they transitioned from their previous food safety systems. The most common reason for becoming GFSI compliant was to meet customers' requirements; thus, supplier implementation of the GFSI standards was not entirely voluntary. Other reasons given for compliance were enhancing food safety and remaining competitive. About 54 % of food processing plants using GFSI benchmarked schemes followed the guidelines of Safe Quality Food 2000 and 37 % followed those of the British Retail Consortium. At the supplier level, 58 % followed Safe Quality Food 2000 and 31 % followed the British Retail Consortium. Respondents reported that the certification process took about 10 months. The most common reason for selecting a certain GFSI benchmarked scheme was because it was widely accepted by customers (retailers). Four other common reasons were (i) the standard has a good reputation in the industry, (ii) the standard was recommended by others, (iii) the standard is most often used in the industry, and (iv) the standard was required by one of their customers. Most suppliers agreed that increased safety of their products was required to comply with GFSI benchmarked schemes. They also agreed that the GFSI required a more carefully documented food safety management system, which often required improved company food safety practices and increased employee training. Adoption of a GFSI benchmarked scheme resulted in fewer audits, i.e., one less per year. An educational opportunity exists to acquaint retailers and suppliers worldwide with the benefits of having an internationally recognized certification program such as that recognized by the GFSI.

49 CFR 223.15 - Requirements for existing passenger cars.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

49 CFR 223.15 - Requirements for existing passenger cars.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

49 CFR 223.15 - Requirements for existing passenger cars.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

49 CFR 223.15 - Requirements for existing passenger cars.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

49 CFR 223.15 - Requirements for existing passenger cars.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Repins, Ingrid; Jordan, Dirk; Bosco, Nick

The proposed new IEC standard will address the test temperature requirements in IEC 61215 (module design), IEC 61730 (module safety), IEC 62790 (junction box safety) and IEC 62852 (connectors), and will provide guidelines to modify temperature limits in four existing standards to better describe module performance in hotter climates. This workshop includes four presentations: Special Testing for Modules Deployed in Hot Use Environments - Are We Doing This in a Low-Cost Way?, Experimental Evidence, Why the highest temperatures are the most stressful to PV modules during thermal cycling, and Safety Aspects for Modules Deployed in Hot Use Environments.

Security in Intelligent Transport Systems for Smart Cities: From Theory to Practice.

PubMed

Javed, Muhammad Awais; Ben Hamida, Elyes; Znaidi, Wassim

2016-06-15

Connecting vehicles securely and reliably is pivotal to the implementation of next generation ITS applications of smart cities. With continuously growing security threats, vehicles could be exposed to a number of service attacks that could put their safety at stake. To address this concern, both US and European ITS standards have selected Elliptic Curve Cryptography (ECC) algorithms to secure vehicular communications. However, there is still a lack of benchmarking studies on existing security standards in real-world settings. In this paper, we first analyze the security architecture of the ETSI ITS standard. We then implement the ECC based digital signature and encryption procedures using an experimental test-bed and conduct an extensive benchmark study to assess their performance which depends on factors such as payload size, processor speed and security levels. Using network simulation models, we further evaluate the impact of standard compliant security procedures in dense and realistic smart cities scenarios. Obtained results suggest that existing security solutions directly impact the achieved quality of service (QoS) and safety awareness of vehicular applications, in terms of increased packet inter-arrival delays, packet and cryptographic losses, and reduced safety awareness in safety applications. Finally, we summarize the insights gained from the simulation results and discuss open research challenges for efficient working of security in ITS applications of smart cities.

Safety and health in the construction of fixed offshore installations in the petroleum industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1981-01-01

A meeting convened by the ILO (International Labor Office) on safety problems in the offshore petroleum industry recommended the preparation of a code of practice setting out standards for safety and health during the construction of fixed offshore installations. Such a code, to be prepared by the ILO in co-operation with other bodies, including the Inter-Governmental Maritime Consultative Organisation (IMCO), was to take into consideration existing standards applicable to offshore construction activities and to supplement the ILO codes of practice on safety and health in building and civil engineering work, shipbuilding and ship repairing. (Copyright (c) International Labour Organisation 1981.)

An evaluation of the relative safety of U.S. mining explosion-protected equipment approval requirements versus international standards

PubMed Central

Calder, W.; Snyder, D.; Burr, J.F.

2018-01-01

This paper provides a determination of the equivalent level of protection of the international standards relative to similar criteria used by the U.S. Mine Safety and Health Administration (MSHA) to approve two-fault intrinsically safe (IS) stand-alone equipment. U.S. mining law requires such a determination for MSHA to use alternatives to existing standards. The primary issue is to demonstrate that the international standards for equipment evaluation will provide at least the same level of protection for miners as the document currently used by MSHA. PMID:29780219

Generic FPGA-Based Platform for Distributed IO in Proton Therapy Patient Safety Interlock System

NASA Astrophysics Data System (ADS)

Eichin, Michael; Carmona, Pablo Fernandez; Johansen, Ernst; Grossmann, Martin; Mayor, Alexandre; Erhardt, Daniel; Gomperts, Alexander; Regele, Harald; Bula, Christian; Sidler, Christof

2017-06-01

At the Paul Scherrer Institute (PSI) in Switzerland, cancer patients are treated with protons. Proton therapy at PSI has a long history and started in the 1980s. More than 30 years later, a new gantry has recently been installed in the existing facility. This new machine has been delivered by an industry partner. A big challenge is the integration of the vendor's safety system into the existing PSI environment. Different interface standards and the complexity of the system made it necessary to find a technical solution connecting an industry system to the existing PSI infrastructure. A novel very flexible distributed IO system based on field-programmable gate array (FPGA) technology was developed, supporting many different IO interface standards and high-speed communication links connecting the device to a PSI standard versa module eurocard-bus input output controller. This paper summarizes the features of the hardware technology, the FPGA framework with its high-speed communication link protocol, and presents our first measurement results.

The OSHA standard setting process: role of the occupational health nurse.

PubMed

Klinger, C S; Jones, M L

1994-08-01

1. Occupational health nurses are the health professionals most often involved with the worker who suffers as a result of ineffective or non-existent safety and health standards. 2. Occupational health nurses are familiar with health and safety standards, but may not understand or participate in the rulemaking process used to develop them. 3. Knowing the eight basic steps of rulemaking and actively participating in the process empowers occupational health nurses to influence national policy decisions affecting the safety and health of millions of workers. 4. By actively participating in rulemaking activities, occupational health nurses also improve the quality of occupational health nursing practice and enhance the image of the nursing profession.

Results of EUREKA project STILMED: transfer to standards

NASA Astrophysics Data System (ADS)

Woellmer, Wolfgang

1996-12-01

The final results of the German part of the joint project STILMED 'Safety Technology in Laser Medicine' are available and being prepared for publication. The question is raised, if parts of these results may be subject to international standards. An overview is given for the structure and procedure of national, European and international standardization. Existing standards are considered concerning their relationship to STILMED, which dealt with the chemical, particulate and microbiological composition and possible hazards of laser plume, as well as protection means, like plume evacuators, including the development of nozzles and instruments with integrated evacuation channels, and face masks. Results of basic research and experiences with medical treatment modalities are not matter for standardization. On the other hand, plume evacuators and their technical data should be submitted to standards, which define test procedures for their performance and safety. Also, surgical face masks, for which no international standards exists, could be well suited for standardization, although the multitude of application conditions would make it an excessive task. At least, products that claim 'for laser use' or 'laserproof' or similar should fulfill standardized requirements, and the respective wording needs protection by standard definition.

Radon in the Workplace: the Occupational Safety and Health Administration (OSHA) Ionizing Radiation Standard.

PubMed

Lewis, Robert K

2016-10-01

On 29 December 1970, the Occupational Safety and Health Act of 1970 established the Occupational Safety and Health Administration (OSHA). This article on OSHA, Title 29, Part 1910.1096 Ionizing Radiation standard was written to increase awareness of the employer, the workforce, state and federal governments, and those in the radon industry who perform radon testing and radon mitigation of the existence of these regulations, particularly the radon relevant aspect of the regulations. This review paper was also written to try to explain what can sometimes be complicated regulations. As the author works within the Radon Division of the Pennsylvania Department of Environmental Protection, Bureau of Radiation Protection, the exclusive focus of the article is on radon. The 1910.1096 standard obviously covers many other aspects of radiation and radiation safety in the work place.

Security in Intelligent Transport Systems for Smart Cities: From Theory to Practice

PubMed Central

Javed, Muhammad Awais; Ben Hamida, Elyes; Znaidi, Wassim

2016-01-01

Connecting vehicles securely and reliably is pivotal to the implementation of next generation ITS applications of smart cities. With continuously growing security threats, vehicles could be exposed to a number of service attacks that could put their safety at stake. To address this concern, both US and European ITS standards have selected Elliptic Curve Cryptography (ECC) algorithms to secure vehicular communications. However, there is still a lack of benchmarking studies on existing security standards in real-world settings. In this paper, we first analyze the security architecture of the ETSI ITS standard. We then implement the ECC based digital signature and encryption procedures using an experimental test-bed and conduct an extensive benchmark study to assess their performance which depends on factors such as payload size, processor speed and security levels. Using network simulation models, we further evaluate the impact of standard compliant security procedures in dense and realistic smart cities scenarios. Obtained results suggest that existing security solutions directly impact the achieved quality of service (QoS) and safety awareness of vehicular applications, in terms of increased packet inter-arrival delays, packet and cryptographic losses, and reduced safety awareness in safety applications. Finally, we summarize the insights gained from the simulation results and discuss open research challenges for efficient working of security in ITS applications of smart cities. PMID:27314358

49 CFR 1155.27 - Board determinations under 49 U.S.C. 10909.

Code of Federal Regulations, 2010 CFR

2010-10-01

... determines that the facility at the existing or proposed location would not pose an unreasonable risk to... risk to public health, safety, or the environment, the Board shall weigh the particular facility's... comply with an environmental, public health, or public safety standard that falls under the traditional...

14 CFR 35.15 - Safety analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single propeller elements (for example...

14 CFR 35.15 - Safety analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single elements (for example, blades...

14 CFR 35.15 - Safety analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single elements (for example, blades...

14 CFR 35.15 - Safety analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... combined with sound design and test philosophies. (b) If significant doubt exists as to the effects of... STANDARDS: PROPELLERS Design and Construction § 35.15 Safety analysis. (a)(1) The applicant must analyze the... to be verified by test. (c) The primary failures of certain single elements (for example, blades...

49 CFR 577.4 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... purposes of this part: Act means 49 U.S.C. Chapter 30101-30169. Administrator means the Administrator of... purchaser in good faith for a purpose other than resale. Leased motor vehicle means any motor vehicle that... existence of a safety-related defect or noncompliance with a Federal motor vehicle safety standard in the...

49 CFR 577.4 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... purposes of this part: Act means 49 U.S.C. Chapter 30101-30169. Administrator means the Administrator of... purchaser in good faith for a purpose other than resale. Leased motor vehicle means any motor vehicle that... existence of a safety-related defect or noncompliance with a Federal motor vehicle safety standard in the...

Development and Psychometric Analysis of a Nurses’ Attitudes and Skills Safety Scale: Initial Results

PubMed Central

Armstrong, Gail E.; Dietrich, Mary; Norman, Linda; Barnsteiner, Jane; Mion, Lorraine

2016-01-01

Health care organizations have incorporated updated safety principles in the analysis of errors and in norms and standards. Yet no research exists that assesses bedside nurses’ perceived skills or attitudes toward updated safety concepts. The aims of this study were to develop a scale assessing nurses’ perceived skills and attitudes toward updated safety concepts, determine content validity, and examine internal consistency of the scale and subscales. Understanding nurses’ perceived skills and attitudes about safety concepts can be used in targeting strategies to enhance their safety practices. PMID:27479518

Development and Psychometric Analysis of a Nurses' Attitudes and Skills Safety Scale: Initial Results.

PubMed

Armstrong, Gail E; Dietrich, Mary; Norman, Linda; Barnsteiner, Jane; Mion, Lorraine

Health care organizations have incorporated updated safety principles in the analysis of errors and in norms and standards. Yet no research exists that assesses bedside nurses' perceived skills or attitudes toward updated safety concepts. The aims of this study were to develop a scale assessing nurses' perceived skills and attitudes toward updated safety concepts, determine content validity, and examine internal consistency of the scale and subscales. Understanding nurses' perceived skills and attitudes about safety concepts can be used in targeting strategies to enhance their safety practices.

Energy Storage System Safety: Plan Review and Inspection Checklist

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Pam C.; Conover, David R.

Codes, standards, and regulations (CSR) governing the design, construction, installation, commissioning, and operation of the built environment are intended to protect the public health, safety, and welfare. While these documents change over time to address new technology and new safety challenges, there is generally some lag time between the introduction of a technology into the market and the time it is specifically covered in model codes and standards developed in the voluntary sector. After their development, there is also a timeframe of at least a year or two until the codes and standards are adopted. Until existing model codes andmore » standards are updated or new ones are developed and then adopted, one seeking to deploy energy storage technologies or needing to verify the safety of an installation may be challenged in trying to apply currently implemented CSRs to an energy storage system (ESS). The Energy Storage System Guide for Compliance with Safety Codes and Standards1 (CG), developed in June 2016, is intended to help address the acceptability of the design and construction of stationary ESSs, their component parts, and the siting, installation, commissioning, operations, maintenance, and repair/renovation of ESS within the built environment.« less

Security, safety, and related technology - the triangle of eHealth service provision.

PubMed

Savastano, Mario; Hovsto, Asbjorn; Pharow, Peter; Blobel, Bernd

2008-01-01

The developing of innovative solutions in the emerging eHealth market requires strong economic efforts which may be justified only in presence of particularly suitable boundary conditions. Among the factors retained of primary importance for the development of eHealth, a correct approach to id-management is unanimously considered fundamental. Three keywords in the id-management context appear particularly important: standardization, security and safety. Standardization may contribute to increase the size and duration of the eHealth market, while security and safety may encourage all the stakeholders to trust in a appropriate and safe management of all the very sensitive personal data involved in the eHealth applications. The aim of the present paper is analyzing some security and safety issues in eHealth from the particular prospective of the identity management and standardization. The paper highlights the mission of the EU funded "BioHealth" project whose mission is to increase the stakeholders' knowledge about existing and emerging standards in eHealth with particular reference to identity management.

Wheelchair transportation safety on school buses: stakeholder recommendations for priority issues and actions.

PubMed

Buning, Mary Ellen; Karg, Patricia E

2011-01-01

This paper presents results from and provides discussion of a state-of-the-science workshop in which highly informed stakeholders in wheelchair transportation safety for students on school buses were participants. The Nominal Group Technique was used to create a process in which the main issues preventing safe transportation of wheelchair-seated students and key strategies to overcome these issues were identified and ranked. These results, along with a synthesis of group discussion and recommendations for action, are presented along with consideration of current policies, regulations, and political realities. Critical safety shortcomings exist in this highly specialized enterprise that varies from state to state. Recommended strategies include implementing wheelchair requirements in federal transportation safety standards, creation of a clearinghouse for wheelchair transportation best practices and education, creation of national standards for training, practices, and monitoring, and increased "buy-in" to voluntary wheelchair standards by wheelchair manufacturers.

76 FR 3175 - Proposed Extension of Existing Information Collection; Hoist Operators' Physical Fitness

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-19

... Extension of Existing Information Collection; Hoist Operators' Physical Fitness AGENCY: Mine Safety and... fitness. DATES: All comments must be received by midnight Eastern Standard Time on March 21, 2011... 56.19057 and 57.19057 require the annual examination and certification of hoist operators' fitness by...

77 FR 9268 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... proposes the following: (a) Non-permissible surveying equipment will be used only when equivalent...-powered non-permissible surveying equipment in or inby the last open crosscut, including in the return airways. The petitioner states that: (1) Equivalent permissible equipment does not exist. (2) Equivalent...

Towards a Formal Basis for Modular Safety Cases

NASA Technical Reports Server (NTRS)

Denney, Ewen; Pai, Ganesh

2015-01-01

Safety assurance using argument-based safety cases is an accepted best-practice in many safety-critical sectors. Goal Structuring Notation (GSN), which is widely used for presenting safety arguments graphically, provides a notion of modular arguments to support the goal of incremental certification. Despite the efforts at standardization, GSN remains an informal notation whereas the GSN standard contains appreciable ambiguity especially concerning modular extensions. This, in turn, presents challenges when developing tools and methods to intelligently manipulate modular GSN arguments. This paper develops the elements of a theory of modular safety cases, leveraging our previous work on formalizing GSN arguments. Using example argument structures we highlight some ambiguities arising through the existing guidance, present the intuition underlying the theory, clarify syntax, and address modular arguments, contracts, well-formedness and well-scopedness of modules. Based on this theory, we have a preliminary implementation of modular arguments in our toolset, AdvoCATE.

40 CFR 63.1159 - Operational and equipment standards for existing, new, or reconstructed sources.

Code of Federal Regulations, 2014 CFR

2014-07-01

... atmosphere shall be equipped with a local fume capture system, ventilated through an air pollution control... pollution control equipment and monitoring equipment in a manner consistent with safety and good air... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS...

40 CFR 63.1159 - Operational and equipment standards for existing, new, or reconstructed sources.

Code of Federal Regulations, 2013 CFR

2013-07-01

... atmosphere shall be equipped with a local fume capture system, ventilated through an air pollution control... pollution control equipment and monitoring equipment in a manner consistent with safety and good air... ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS...

12 CFR Appendix C to Part 30 - OCC Guidelines Establishing Standards for Residential Mortgage Lending Practices

Code of Federal Regulations, 2012 CFR

2012-01-01

... Residential Mortgage Lending Practices C Appendix C to Part 30 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY SAFETY AND SOUNDNESS STANDARDS Pt. 30, App. C Appendix C to Part 30—OCC Guidelines.... Preservation of Existing Authority C. Relationship to Other Legal Requirements D. Definitions II. Standards for...

76 FR 59742 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

... system. The petitioner states that: (1) The heater recaptures kiln gases to preheat the crushed limestone.... Cardox safety heaters are low grade explosives that use CO \\2\\, a gas that is commonly found in fire... diluting and rendering harmless methane gas that is released in the mine atmosphere during the mining cycle...

Inventory of Safety-related Codes and Standards for Energy Storage Systems with some Experiences related to Approval and Acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, David R.

The purpose of this document is to identify laws, rules, model codes, codes, standards, regulations, specifications (CSR) related to safety that could apply to stationary energy storage systems (ESS) and experiences to date securing approval of ESS in relation to CSR. This information is intended to assist in securing approval of ESS under current CSR and to identification of new CRS or revisions to existing CRS and necessary supporting research and documentation that can foster the deployment of safe ESS.

2016 Updated American Society of Clinical Oncology/Oncology Nursing Society Chemotherapy Administration Safety Standards, Including Standards for Pediatric Oncology.

PubMed

Neuss, Michael N; Gilmore, Terry R; Belderson, Kristin M; Billett, Amy L; Conti-Kalchik, Tara; Harvey, Brittany E; Hendricks, Carolyn; LeFebvre, Kristine B; Mangu, Pamela B; McNiff, Kristen; Olsen, MiKaela; Schulmeister, Lisa; Von Gehr, Ann; Polovich, Martha

2016-12-01

Purpose To update the ASCO/Oncology Nursing Society (ONS) Chemotherapy Administration Safety Standards and to highlight standards for pediatric oncology. Methods The ASCO/ONS Chemotherapy Administration Safety Standards were first published in 2009 and updated in 2011 to include inpatient settings. A subsequent 2013 revision expanded the standards to include the safe administration and management of oral chemotherapy. A joint ASCO/ONS workshop with stakeholder participation, including that of the Association of Pediatric Hematology Oncology Nurses and American Society of Pediatric Hematology/Oncology, was held on May 12, 2015, to review the 2013 standards. An extensive literature search was subsequently conducted, and public comments on the revised draft standards were solicited. Results The updated 2016 standards presented here include clarification and expansion of existing standards to include pediatric oncology and to introduce new standards: most notably, two-person verification of chemotherapy preparation processes, administration of vinca alkaloids via minibags in facilities in which intrathecal medications are administered, and labeling of medications dispensed from the health care setting to be taken by the patient at home. The standards were reordered and renumbered to align with the sequential processes of chemotherapy prescription, preparation, and administration. Several standards were separated into their respective components for clarity and to facilitate measurement of adherence to a standard. Conclusion As oncology practice has changed, so have chemotherapy administration safety standards. Advances in technology, cancer treatment, and education and training have prompted the need for periodic review and revision of the standards. Additional information is available at http://www.asco.org/chemo-standards .

A bicycle safety index for evaluating urban street facilities.

PubMed

Asadi-Shekari, Zohreh; Moeinaddini, Mehdi; Zaly Shah, Muhammad

2015-01-01

The objectives of this research are to conceptualize the Bicycle Safety Index (BSI) that considers all parts of the street and to propose a universal guideline with microscale details. A point system method comparing existing safety facilities to a defined standard is proposed to estimate the BSI. Two streets in Singapore and Malaysia are chosen to examine this model. The majority of previous measurements to evaluate street conditions for cyclists usually cannot cover all parts of streets, including segments and intersections. Previous models also did not consider all safety indicators and cycling facilities at a microlevel in particular. This study introduces a new concept of a practical BSI to complete previous studies using its practical, easy-to-follow, point system-based outputs. This practical model can be used in different urban settings to estimate the level of safety for cycling and suggest some improvements based on the standards.

Content of system design descriptions

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all themore » attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective.« less

76 FR 16640 - Petitions for Modification of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... standard to permit an alternative method of compliance to allow additional outby storage caches of Self.... The petitioner further states that: (a) Additional SCSR outby storage caches will be placed a maximum of 2,000 feet apart in beltlines and return air courses; (b) these additional SCSR outby storage...

76 FR 23714 - Railroad Safety Appliance Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-28

... would include each of the elements that would be necessary to allow it to make an informed decision on a... for the review and approval of existing industry standards. This process will permit railroad industry.... Section 238.230 borrows the process set out in Sec. 238.21. It allows a recognized representative of the...

Mobilization and Defense Management Technical Reports Series. The Impact of OSHA (Occupational Safety and Health Administration) and EPA (Environmental Protection Agency) on Defense Industry and the Implications for Mobilization.

DTIC Science & Technology

1983-05-01

mat of the voluntary standards thean in existence (JASI and NVA standards, for wcmmle). fwue affected the broad spectrum of Nm rican industry. As OBIA ...have been funded. As OMA matured, programs, standards, and inspections were significantly improved and gained industry aeptance. OBIA has deleted many

Defense Standardization Program Journal, July/December 2007

DTIC Science & Technology

2007-12-01

during the standard next review cycle, and identified areas where supplemental standards are needed. ENTERPRISE POWER SECURITY AND CONTINUITY Continual...availability of electric power at the enterprise level is essential for busi- ness functions, safety, and the public well-being.Yet many practical...challenges exist related to keeping critical operations, equipment, or facilities powered when the Peieeaeuiyivle ail ad acn teholg tatsnee electric grid is

49 CFR 213.351 - Rail joints.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Train Operations at Track Classes 6 and Higher § 213.351... contraction due to temperature variations. When no-slip, joint-to-rail contact exists by design, the...

New Norwegian HSE standard for the offshore industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huse, J.R.

1996-12-31

NORSOK (The competitive standing of the Norwegian offshore sector) is the Norwegian industry initiative to add value, reduce cost and lead time and remove unnecessary activities in offshore field developments and operations. The NORSOK standards are developed by the Norwegian petroleum industry as a part of the NORSOK initiative and are jointly issued by the Norwegian Oil Industry Association and the Federation of Norwegian Engineering Industries. The purpose of the industry standard is to replace the individual oil company specifications for use in existing and future petroleum industry developments, subject to the individual company`s review and application. The NORSOK Health,more » Safety and Environment (HSE) standards covers: Technical Safety, Working Environment, Environmental Care, HSE during Construction. The standards are now being used in ongoing offshore development projects, and the experience with standards shows that the principle aim is being met. The development of standards continues, implementing experience gained.« less

Assessment of Three “WHO” Patient Safety Solutions: Where Do We Stand and What Can We Do?

PubMed Central

Banihashemi, Sheida; Hatam, Nahid; Zand, Farid; Kharazmi, Erfan; Nasimi, Soheila; Askarian, Mehrdad

2015-01-01

Background: Most medical errors are preventable. The aim of this study was to compare the current execution of the 3 patient safety solutions with WHO suggested actions and standards. Methods: Data collection forms and direct observation were used to determine the status of implementation of existing protocols, resources, and tools. Results: In the field of patient hand-over, there was no standardized approach. In the field of the performance of correct procedure at the correct body site, there were no safety checklists, guideline, and educational content for informing the patients and their families about the procedure. In the field of hand hygiene (HH), although availability of necessary resources was acceptable, availability of promotional HH posters and reminders was substandard. Conclusions: There are some limitations of resources, protocols, and standard checklists in all three areas. We designed some tools that will help both wards to improve patient safety by the implementation of adapted WHO suggested actions. PMID:26900434

Commonalities and Differences in Functional Safety Systems Between ISS Payloads and Industrial Applications

NASA Astrophysics Data System (ADS)

Malyshev, Mikhail; Kreimer, Johannes

2013-09-01

Safety analyses for electrical, electronic and/or programmable electronic (E/E/EP) safety-related systems used in payload applications on-board the International Space Station (ISS) are often based on failure modes, effects and criticality analysis (FMECA). For industrial applications of E/E/EP safety-related systems, comparable strategies exist and are defined in the IEC-61508 standard. This standard defines some quantitative criteria based on potential failure modes (for example, Safe Failure Fraction). These criteria can be calculated for an E/E/EP system or components to assess their compliance to requirements of a particular Safety Integrity Level (SIL). The standard defines several SILs depending on how much risk has to be mitigated by a safety-critical system. When a FMECA is available for an ISS payload or its subsystem, it may be possible to calculate the same or similar parameters as defined in the 61508 standard. One example of a payload that has a dedicated functional safety subsystem is the Electromagnetic Levitator (EML). This payload for the ISS is planned to be operated on-board starting 2014. The EML is a high-temperature materials processing facility. The dedicated subsystem "Hazard Control Electronics" (HCE) is implemented to ensure compliance to failure tolerance in limiting samples processing parameters to maintain generation of the potentially toxic by-products to safe limits in line with the requirements applied to the payloads by the ISS Program. The objective of this paper is to assess the implementation of the HCE in the EML against criteria for functional safety systems in the IEC-61508 standard and to evaluate commonalities and differences with respect to safety requirements levied on ISS Payloads. An attempt is made to assess a possibility of using commercially available components and systems certified for compliance to industrial functional safety standards in ISS payloads.

Design Development Test and Evaluation (DDT and E) Considerations for Safe and Reliable Human Rated Spacecraft Systems

NASA Technical Reports Server (NTRS)

Miller, James; Leggett, Jay; Kramer-White, Julie

2008-01-01

A team directed by the NASA Engineering and Safety Center (NESC) collected methodologies for how best to develop safe and reliable human rated systems and how to identify the drivers that provide the basis for assessing safety and reliability. The team also identified techniques, methodologies, and best practices to assure that NASA can develop safe and reliable human rated systems. The results are drawn from a wide variety of resources, from experts involved with the space program since its inception to the best-practices espoused in contemporary engineering doctrine. This report focuses on safety and reliability considerations and does not duplicate or update any existing references. Neither does it intend to replace existing standards and policy.

75 FR 65151 - Marine Vapor Control Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-21

...The Coast Guard proposes to increase maritime domain safety by revising existing safety regulations for facility and vessel vapor control systems (VCSs). The proposed changes would make VCS requirements more compatible with new Federal and State environmental requirements, reflect industry advancements in VCS technology, and codify the standards for the design and operation of a VCS at tank barge cleaning facilities. These changes would increase the safety of operations by regulating the design, installation, and use of VCSs, but would not require anyone to install or use VCSs.

Organizational Culture for Safety, Security, and Safeguards in New Nuclear Power Countries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kovacic, Donald N

2015-01-01

This chapter will contain the following sections: Existing international norms and standards for developing the infrastructure to support new nuclear power programs The role of organizational culture and how it supports the safe, secure, and peaceful application of nuclear power Identifying effective and efficient strategies for implementing safety, security and safeguards in nuclear operations Challenges identified in the implementation of safety, security and safeguards Potential areas for future collaboration between countries in order to support nonproliferation culture

78 FR 59066 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-25

... employed at the Rock and Roll Coal Company, as the standard. Docket Number: M-2013-040-C. Petitioner... petitions for modification. II. Petitions for Modification Docket Number: M-2013-039-C. Petitioner: Rock N Roll Coal Company, Inc., P.O. Box 142, Justice, West Virginia 24851. Mines: Mine No. 3, MSHA I.D. No...

77 FR 32698 - Proposed Extension of Existing Information Collection; Safety Standards for Roof Bolts in Metal...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... with the Paperwork Reduction Act of 1995. This program helps to assure that requested data can be... approved this information collection request on September 28, 2009. The package expires on September 30... standards related to the integrity of roof bolts. MSHA has updated the data for the number of respondents...

77 FR 4835 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-31

... ingredients, thereby creating a ``filter-cake.'' At the end of the brewing process, following fermentation... process, following fermentation that results in the creation of the alcohol-containing liquid that is...

77 FR 42005 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-17

... will continuously monitor for methane immediately before and during the use of nonpermissible surveying... methane is detected in concentrations at or above one percent for the area being surveyed. [[Page 42006

78 FR 13089 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... for methane immediately before and during the use of nonpermissible surveying equipment in or inby the last open crosscut. (e) Nonpermissible surveying equipment will not be used if methane [[Page 13090

76 FR 16641 - Petitions for Modification of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

... past the evaluation points to determine the methane, oxygen, and carbon monoxide concentrations using a...; (e) if an increase of 0.5 percent methane above the previous reading or a 10 percent unplanned change...

46 CFR 154.3 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.3 Purpose. The purpose of this part is to prescribe rules for new and existing gas vessels. ...

46 CFR 154.3 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.3 Purpose. The purpose of this part is to prescribe rules for new and existing gas vessels. ...

46 CFR 154.3 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.3 Purpose. The purpose of this part is to prescribe rules for new and existing gas vessels. ...

46 CFR 154.3 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.3 Purpose. The purpose of this part is to prescribe rules for new and existing gas vessels. ...

46 CFR 154.3 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.3 Purpose. The purpose of this part is to prescribe rules for new and existing gas vessels. ...

MO-A-BRC-00: TG167: Clinical Recommendations for Innovative Brachytherapy Devices and Applicators

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1)more » dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of requirements of the U.S. NRC, FDA, Department of Transportation, International Electrotechnical Commission Medical Electrical Equipment Standard 60601, European Commission for CE Marking, and institutional review boards and radiation safety committees. Learning Objectives: Understand the necessary dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use. Evaluate risks and benefits from regulatory and safety perspectives. Identify necessary resources and create a plan for clinical introduction of innovative brachytherapy device or applications. Consultant for Theragenics Corp.; R. Nath, Consultant to Theragenics Corp.« less

MO-A-BRC-02: TG167 Report - Detailed Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivard, M.

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1)more » dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of requirements of the U.S. NRC, FDA, Department of Transportation, International Electrotechnical Commission Medical Electrical Equipment Standard 60601, European Commission for CE Marking, and institutional review boards and radiation safety committees. Learning Objectives: Understand the necessary dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use. Evaluate risks and benefits from regulatory and safety perspectives. Identify necessary resources and create a plan for clinical introduction of innovative brachytherapy device or applications. Consultant for Theragenics Corp.; R. Nath, Consultant to Theragenics Corp.« less

MO-A-BRC-01: TG167 Report - Introduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nath, R.

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1)more » dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of requirements of the U.S. NRC, FDA, Department of Transportation, International Electrotechnical Commission Medical Electrical Equipment Standard 60601, European Commission for CE Marking, and institutional review boards and radiation safety committees. Learning Objectives: Understand the necessary dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use. Evaluate risks and benefits from regulatory and safety perspectives. Identify necessary resources and create a plan for clinical introduction of innovative brachytherapy device or applications. Consultant for Theragenics Corp.; R. Nath, Consultant to Theragenics Corp.« less

[Differences and international standardization between acupuncture as therapy and as specialty].

PubMed

Ng, Szetuen

2017-01-12

The purpose of this study is to explore the differences of definition and clinical roles as well as international standardization between acupuncture as therapy and as specialty, which can provide reference evidence for specialization and internationalization of acupuncture. Owing to the clinical efficacy and safety, the credibility and controversy both exist in acupuncture; moreover, there is a lack of fair definition and international precedent regarding acupuncture specialty. Therefore, it is particularly essential to objectively compare the differences of definitions and clinical roles as well as criteria of international standardization for acupuncture as therapy and as specialty. It is believed acupuncture standardization can draw lessons from the international medical standards, evidence-based medicine and acupuncture theory from the following three major projects:acupuncture safety and contraindications; acupuncture indications and treatment guidelines; acupuncture indication classified into 3 levels of evidence-based acupuncture disease spectrum, as objective evidence of indication of acupuncture specialty.

Fire Safety Aspects of Polymeric Materials. Volume 6. Aircraft. Civil and Military

DTIC Science & Technology

1977-01-01

resistance of the existing Polyurethane foam- based seating sys- tems be improved through design, construction, and selection of covering materials. 12. A...aircraft interiors under real fire conditions. To provide the data base for developing improved fire safety standards for aircraft, four types of...the determination of immobilizing effect was based on performance in the swimming test, a simple exercise method also favored by Kimmerle to provide

Agricultural health and safety: incorporating the worker perspective.

PubMed

Liebman, Amy K; Augustave, Wilson

2010-07-01

This commentary offers a worker's perspective on agricultural health and safety and describes (1) the historical exemption of agriculture from regulatory oversight and barriers encountered due to lack of regulations and poor enforcement of the existing standards; (2) the effect of immigration status on worker protections; and (3) the basic desire for economic survival and how this impacts worker health and safety. The commentary describes two models to reduce hazards at work that illustrate how workers' perspectives can be incorporated successfully at the policy level and during the intervention development process and puts forth recommendations for employers, researchers, and funding agencies to facilitate the integration of workers' perspectives into occupational health and safety in agriculture. Ultimately, improved worker protection requires systemic policy and regulatory changes as well as strong enforcement of existing regulations. This commentary summarizes the presentation, "Ground View: Perspectives of Hired Workers," at the Agricultural Safety and Health Council of America/National Institute for Occupational Safety and Health conference, "Be Safe, Be Profitable: Protecting Workers in Agriculture," January 27-28, 2010, Dallas/Fort Worth, Texas.

76 FR 64384 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-18

... flame-resistant material or made with material accepted by MSHA as flame resistant. (9) If mining... alcohol slow-fermented from starch, bearing an alcohol content of less than 10 percent alcohol by volume...

Safety of High Speed Guided Ground Transportation Systems : Review of Existing EMF Guidelines, Standards and Regulations

DOT National Transportation Integrated Search

1993-08-01

To assess the state of knowledge about anticipated electric and magnetic field (EMF) exposures from electrical transportation systems, including electrically powered rail and magnetically levitated (maglev), research concerning biological effects of ...

Changing An Electrical Safety Culture - The Importance of Understanding Why.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Waters, Richard Thomas

2015-12-01

Abstract – Electrical workers, regardless of experience, are faced with a major barrier when first introduced to NFPA 70E, “The Standard for Electrical Safety in the Workplace,” and an erroneous electrical safety culture pre-exists. This paper describes, from the author’s point of view, the barrier that he and other electrical workers have experienced and his insight into overcoming the barrier. The author in conclusion will present a series of techniques that can be used to assist other electrical workers in overcoming the barrier.

78 FR 19021 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

... exclusively for this purpose. The oil will be further checked for water and ethylene glycol in shop storage tanks prior to blending with diesel fuel. If either is observed, the water and or ethylene glycol will...

Development of a Medication Safety and Quality Survey for Small Rural Hospitals.

PubMed

Winterstein, Almut G; Johns, Thomas E; Campbell, Kyle N; Libby, Joel; Pannell, Bob

2017-12-01

We summarize the development and initial implementation of a survey tool to assess medication safety in small rural hospitals. As part of an ongoing rural hospital medication safety improvement program, we developed a survey tool in all 13 critical access hospitals (CAHs) in Florida. The survey was compiled from existing medication safety assessments and standards, clinical practice guidelines, and published literature. Survey items were selected based on considerations regarding practicality and relevance to the CAH setting.The final survey instrument included 134 items representing 17 medication safety domains. Overall hospital scores ranged from 41% to 95%, with a median of 59%. Most hospitals showed large variation in scores across domains, with 5 hospitals having at least 1 domain with scores less than 10%. Highest scores across all facilities were seen for safety procedures concerning high-alert or look-alike medications and the assembly of emergency carts. The lowest median scores included availability and consistent use of standardized order sets and the effective implementation of medication safety committees. Most hospitals used the survey results to identify and prioritize quality improvement activities. The survey can be used to conduct a short medication safety assessment specific to a limited number of areas and services in CAHs. It showed good ability to discriminate medication safety levels across participating sites and highlighted opportunities for improvement. It may need modification if case mix or services differ in other states or if the status quo of medication safety in CAHs or related standards advance. The described process of survey development might be helpful to support such modifications.

77 FR 30555 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

..., oscilloscopes, vibration analysis machines, insulation testers (meggers), and cable fault detectors (impulse... temperature probes; infrared temperature devices and recorders; insulation testers (meggers); voltage, current..., vibration analysis machines, insulation testers (meggers), and cable fault detectors (impulse generators and...

75 FR 57297 - Petitions for Modification of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-20

.... 15-16663 and Mine No. 24, MSHA I.D. No. 15-19296, Rt. 292, P.O. Box 190, Lovely, Kentucky 41231. All....O. Box 148, Vansant, Virginia 24656 . Mine: No. 10 Mine, MSHA I.D. No. 44-07217, located in...

76 FR 37835 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... small quantity of steel turnings, or other small magnetic particles, will be embedded in the top of the..., Cementation USA, to apply the 500 feet per minute requirement to the man-riding conveyance as well as the...

46 CFR 154.1 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.1 Incorporation by reference... Equipment of Ships Carrying Liquefied Gases in Bulk, 1976 Code For Existing Ships Carrying Liquefied Gases...

46 CFR 154.1 - Incorporation by reference.

Code of Federal Regulations, 2012 CFR

2012-10-01

... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.1 Incorporation by reference... Equipment of Ships Carrying Liquefied Gases in Bulk, 1976 Code For Existing Ships Carrying Liquefied Gases...

Application status and its affecting factors of double standard for multinational corporations in Korea.

PubMed

Ki, Myung; Choi, Jaewook; Lee, Juneyoung; Park, Heechan; Yoon, Seokjoon; Kim, Namhoon; Heo, Jungyeon

2004-02-01

We intended to evaluate the double standard status and to identify factors of determining double standard criteria in multinational corporations of Korea, and specifically those in the occupational health and safety area. A postal questionnaire had been sent, between August 2002 and September 2002, to multinational corporations in Korea. A double standard company was defined as those who answered in more than one item as adopting a different standard among the five items regarding double standard identification. By comparing double standard companies with equivalent standard companies, determinants for double standards were then identified using logistic regression analysis. Of multinational corporations, 45.1% had adopted a double standard. Based on the question naire's scale level, the factor of 'characteristic and size of multinational corporation' was found to have the most potent impact on increasing double standard risk. On the variable level, factors of 'number of affiliated companies' and 'existence of an auditing system with the parent company' showed a strong negative impact on double standard risk. Our study suggests that a distinctive approach is needed to manage the occupational safety and health for multinational corporations. This approach should be focused on the specific level of a corporation, not on a country level.

Development of a New Departure Aversion Standard for Light Aircraft

NASA Technical Reports Server (NTRS)

Borer, Nicholas K.

2017-01-01

The Federal Aviation Administration (FAA) and European Aviation Safety Agency (EASA) have recently established new light aircraft certification rules that introduce significant changes to the current regulations. The changes include moving from prescriptive design requirements to performance-based standards, transferring many of the acceptable means of compliance out of the rules and into consensus standards. In addition, the FAA/EASA rules change the performance requirements associated with some of the more salient safety issues regarding light aircraft. One significant change is the elimination of spin recovery demonstration. The new rules now call for enhanced stall warning and aircraft handling characteristics that demonstrate resistance to inadvertent departure from controlled flight. The means of compliance with these changes in a safe, cost-effective manner is a challenging problem. This paper discusses existing approaches to reducing the likelihood of departure from controlled flight and introduces a new approach, dubbed Departure Aversion, which allows applicants to tailor the amount of departure resistance, stall warning, and enhanced safety equipment to meet the new proposed rules. The Departure Aversion approach gives applicants the freedom to select the most cost-effective portfolio for their design, while meeting the safety intent of the new rules, by ensuring that any combination of the selected approaches will be at a higher equivalent level of safety than today's status quo.

Surveying wearable human assistive technology for life and safety critical applications: standards, challenges and opportunities.

PubMed

Alam, Muhammad Mahtab; Ben Hamida, Elyes

2014-05-23

In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently.

Surveying Wearable Human Assistive Technology for Life and Safety Critical Applications: Standards, Challenges and Opportunities

PubMed Central

Alam, Muhammad Mahtab; Ben Hamida, Elyes

2014-01-01

In this survey a new application paradigm life and safety for critical operations and missions using wearable Wireless Body Area Networks (WBANs) technology is introduced. This paradigm has a vast scope of applications, including disaster management, worker safety in harsh environments such as roadside and building workers, mobile health monitoring, ambient assisted living and many more. It is often the case that during the critical operations and the target conditions, the existing infrastructure is either absent, damaged or overcrowded. In this context, it is envisioned that WBANs will enable the quick deployment of ad-hoc/on-the-fly communication networks to help save many lives and ensuring people's safety. However, to understand the applications more deeply and their specific characteristics and requirements, this survey presents a comprehensive study on the applications scenarios, their context and specific requirements. It explores details of the key enabling standards, existing state-of-the-art research studies, and projects to understand their limitations before realizing aforementioned applications. Application-specific challenges and issues are discussed comprehensively from various perspectives and future research and development directions are highlighted as an inspiration for new innovative solutions. To conclude, this survey opens up a good opportunity for companies and research centers to investigate old but still new problems, in the realm of wearable technologies, which are increasingly evolving and getting more and more attention recently. PMID:24859024

78 FR 58567 - Criteria to Certify Coal Mine Rescue Teams

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-24

... to Certify Coal Mine Rescue Teams AGENCY: Mine Safety and Health Administration, Labor. ACTION...) is requesting comments on revised instruction guides for coal mine rescue team training. MSHA prescribes training materials through the issuance of instruction guides. Existing standards for coal mine...

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice; Baggs, Rhoda

2007-01-01

Safety-critical computer systems must be engineered to meet system and software safety requirements. For legacy safety-critical computer systems, software safety requirements may not have been formally specified during development. When process-oriented software safety requirements are levied on a legacy system after the fact, where software development artifacts don't exist or are incomplete, the question becomes 'how can this be done?' The risks associated with only meeting certain software safety requirements in a legacy safety-critical computer system must be addressed should such systems be selected as candidates for reuse. This paper proposes a method for ascertaining formally, a software safety risk assessment, that provides measurements for software safety for legacy systems which may or may not have a suite of software engineering documentation that is now normally required. It relies upon the NASA Software Safety Standard, risk assessment methods based upon the Taxonomy-Based Questionnaire, and the application of reverse engineering CASE tools to produce original design documents for legacy systems.

Deriving exposure limits

NASA Astrophysics Data System (ADS)

Sliney, David H.

1990-07-01

Historically many different agencies and standards organizations have proposed laser occupational exposure limits (EL1s) or maximum permissible exposure (MPE) levels. Although some safety standards have been limited in scope to manufacturer system safety performance standards or to codes of practice most have included occupational EL''s. Initially in the 1960''s attention was drawn to setting EL''s however as greater experience accumulated in the use of lasers and some accident experience had been gained safety procedures were developed. It became clear by 1971 after the first decade of laser use that detailed hazard evaluation of each laser environment was too complex for most users and a scheme of hazard classification evolved. Today most countries follow a scheme of four major hazard classifications as defined in Document WS 825 of the International Electrotechnical Commission (IEC). The classifications and the associated accessible emission limits (AEL''s) were based upon the EL''s. The EL and AEL values today are in surprisingly good agreement worldwide. There exists a greater range of safety requirements for the user for each class of laser. The current MPE''s (i. e. EL''s) and their basis are highlighted in this presentation. 2. 0

78 FR 41837 - Establishment of Class E Airspace; Parkston, SD

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... Instrument Approach Procedures at Parkston Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date... airspace exists to contain new standard instrument approach procedures at the airport. Controlled airspace...

78 FR 41838 - Establishment of Class E Airspace; Colt, AR

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-12

... Instrument Approach Procedures at Delta Regional Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport. DATES: Effective date: 0901... exists to contain new standard instrument approach procedures at the airport. Controlled airspace...

Industry Initiated Core Safety Attributes for Human Spaceflight for the 7th IAASS Conference

NASA Technical Reports Server (NTRS)

Mango, Edward J.

2014-01-01

Now that the NASA Commercial Crew Program (CCP) is beginning its full certification contract for crew transportation to the International Space Station (ISS), is it time for industry to embrace a minimum set of core safety attributes? Those attributes can then be evolved into an industry-led set of basic safety standards and requirements. After 50 years of human space travel sponsored by governments, there are two basic conditions that now exist within the international space industry. The first, there is enough of a space-faring history to encourage the space industry to design, develop and operate human spaceflight systems without government contracts for anything other than services. Second, industry is capable of defining and enforcing a set of industry-based safety attributes and standards for human spaceflight to low-Earth orbit (LEO). This paper will explore both of these basic conditions with a focus on the safety attributes and standards. In the United States, the Federal Aviation Administration (FAA) is now starting to dialogue with industry about the basic safety principles and attributes needed for potential future regulatory oversight. This process is not yet formalized and will take a number of years once approval is given to move forward. Therefore, throughout the next few years, it is an excellent time and opportunity for industry to collaborate together and develop the core set of attributes and standards. As industry engages and embraces a common set of safety attributes, then government agencies, like the FAA and NASA can use that industry-based product to strengthen their efforts on a safe commercial spaceflight foundation for the future. As the commercial space industry takes the lead role in establishing core safety attributes, and then enforcing those attributes, the entire planet can move away from governmental control of design and development and let industry expand safe and successful space operations in LEO. At that point the governmental agencies can focus on oversight of the industries' defined standards and enforcement for common welfare of the space-faring populous and overall public safety.

49 CFR 192.245 - Repair or removal of defects.

Code of Federal Regulations, 2013 CFR

2013-10-01

... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

49 CFR 192.245 - Repair or removal of defects.

Code of Federal Regulations, 2011 CFR

2011-10-01

... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

49 CFR 192.245 - Repair or removal of defects.

Code of Federal Regulations, 2014 CFR

2014-10-01

... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

49 CFR 192.245 - Repair or removal of defects.

Code of Federal Regulations, 2012 CFR

2012-10-01

... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

49 CFR 192.245 - Repair or removal of defects.

Code of Federal Regulations, 2010 CFR

2010-10-01

... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

76 FR 53660 - Federal Motor Vehicle Safety Standards; Seat Belt Assemblies

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-29

... further require integration of electrical signals from existing front and side crash sensor information... require additional crash sensors for rollover and rear-end crash events for vehicles without such sensors. Crash imminent sensors, or sensors that detect an impending crash, may also be needed. It is also...

49 CFR 213.347 - Automotive or railroad crossings at grade.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION TRACK SAFETY STANDARDS Train Operations at Track Classes 6 and.../barrier system to address the protection of highway traffic and high speed trains. Trains shall not...-approved warning/barrier system exists on that track segment; and (2) All elements of that warning/barrier...

77 FR 810 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... 44 govern the application, processing, and disposition of petitions for modification. This notice is... modification. II. Petitions for Modification Docket Number: M-2011-040-C. Petitioner: D & F Deep Mine, 15... Drive, Pine Grove, Pennsylvania 17963, located in Schuylkill County, Pennsylvania. Regulation Affected...

75 FR 81313 - Petitions for Modification of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... for methane, oxygen, and carbon monoxide concentrations using an approved hand-held device; (iv) measure air quantity using an appropriately calibrated anemometer. Methane gas or other harmful, noxious... percent methane above the previous reading or a 10 percent unplanned change in the airflow quantity from...

78 FR 11230 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-15

... for respiratory protection. A sign will be conspicuously posted requiring the use of personal protective equipment when entering the booth. 5. Airflow through the booth will be sufficient to maintain..., located in Schuylkill County, Pennsylvania. Regulation Affected: 30 CFR 75.1400 (Hoisting equipment...

75 FR 39871 - Manufactured Home Construction and Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-13

...) submitted by the MHCC. The MHCC has prepared and submitted to HUD its second group of recommendations to... modify the existing requirements for control of formaldehyde emissions in Sec. 3280.308, by lowering the... emission controls for medium density fiberboard materials (MDF) of 0.3 ppm. These changes recommended by...

77 FR 12105 - 56th Meeting: RTCA Special Committee 186, Automatic Dependent Surveillance-Broadcast (ADS-B)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-28

... Existing Traffic Safety Nets EUORCAE WG51 TSAA Perpective Flight-deck Interval Management (FIM)--Status... Only Agenda Items Document Approval: DO-xxx--Minimum Aviation System Performance Standards (MASPS) for... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 56th Meeting: RTCA Special Committee...

Navigational and vessel inspection circular No. 5-86. Voluntary standards for US uninspected commercial fishing vessels. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1986-08-18

The vessel standards program, which this NVIC addresses, originally consisted of a series of five NVICs; Stability (5-85), Radio and Shipboard Navigation Equipment (6-85), Fire Safety Measures (7-85), Lifesaving Equipment and Protection of the Crew (8-85), and Hull, Machinery, and Electrical Installations (9-85). Many of these NVICs contained specific operational and educational material for fishermen which could be used before the `Vessel Safety Manual` was published; therefore, some material previously contained in any one of the NVICs has been moved to the manual, although some overlap still exists. Since input from the fishing industry and other interested parties was essential,more » the authors published NVICs 5-85 thru 9-85 as proposed standards and distributed them to over 230 individuals, groups and organizations throuoghout the U.S. who have an interest in fishing vessel safety. These groups included safety consultants, marine surveyors, naval architects, insurance underwriters, fishing vessel owners` associations, boat builders, fisheries unions, personnel associated with the National Oceanic and Atmospheric Administration Sea Grant program, and the National Marine Fisheries Service. Several sent detailed comments; all expressed a favorable reaction to the standards. This report is a consolidation of NVICs 5-85 thru 9-85 taking into account the comments and recommendations received. For continuity, certain regulatory requirements (although not voluntary) have been included where appropriate.« less

Motorcycle helmets--a state of the art review.

PubMed

Fernandes, F A O; Alves de Sousa, R J

2013-07-01

This paper tries to make an overview of the work carried out by scientific community in the area of road helmets safety. In an area that is constantly being pushed forward by market competition, self-awareness of danger and tighter standards, several research groups around the world have contributed to safety gear improvement. In this work concepts related to head impact protection and energy absorption are explained. It also makes reference to the theories related to the development of helmets, as well as to the different existing types nowadays. The materials that are typically used in impact situations and new design concepts are also approached. In addition, it is presented a literature review of current--and most commonly used--helmet test standards, along with new tests and helmet concepts to assess the effects of rotational motion. In a non-restrictive, and never up-to-date report, a state-of-art review on road helmets safety is done, with a special insight into brain injury, helmet design and standards. Copyright © 2013 Elsevier Ltd. All rights reserved.

Combined hormonal contraceptive trials: variable data collection and bleeding assessment methodologies influence study outcomes and physician perception.

PubMed

Mishell, Daniel R; Guillebaud, John; Westhoff, Carolyn; Nelson, Anita L; Kaunitz, Andrew M; Trussell, James; Davis, Ann Jeanette

2007-01-01

Initially approved for use in the United States nearly 50 years ago, oral hormonal contraceptives containing both estrogen and progestin have undergone steady improvements in safety and convenience. Concurrent with improvements in safety associated with decreasing doses of both steroids, there has been an increased incidence of unscheduled bleeding and spotting. There exist no standards regarding data collection techniques and methods, and reporting and analysis of bleeding and spotting events during combined hormonal contraceptive (CHC) trials. For the regulatory review of hormonal contraceptives, data regarding the incidence of bleeding and spotting events are not included in either of the traditional categories of efficacy and safety. Standardization of methods for collecting and analyzing data about cycle control in all clinical trials of CHCs is long overdue. Until such standards are developed and implemented, clinicians need to familiarize themselves with the techniques used in each study in order to provide correct information to their patients about the frequency of bleeding and spotting associated with different formulations and delivery systems.

The European space debris safety and mitigation standard

NASA Astrophysics Data System (ADS)

Alby, F.; Alwes, D.; Anselmo, L.; Baccini, H.; Bonnal, C.; Crowther, R.; Flury, W.; Jehn, R.; Klinkrad, H.; Portelli, C.; Tremayne-Smith, R.

2001-10-01

A standard has been proposed as one of the series of ECSS Standards intended to be applied together for the management, engineering and product assurance in space projects and applications. The requirements in the Standard are defined in terms of what must be accomplished, rather than in terms of how to organise and perform the necessary work. This allows existing organisational structures and methods within agencies and industry to be applied where they are effective, and for such structures and methods to evolve as necessary, without the need for rewriting the standards. The Standard comprises management requirements, design requirements and operational requirements. The standard was prepared by the European Debris Mitigation Standard Working Group (EDMSWG) involving members from ASI, BNSC, CNES, DLR and ESA.

International standards for optical wireless communications: state-of-the-art and future directions

NASA Astrophysics Data System (ADS)

Marciniak, Marian

2017-10-01

As the number of active OWC installations is growing fast, the standards for compatibility of co-existing neighbouring systems are being developed. The paper addresses the Laser Safety (IEC standards), ITU-T Study Group 15 standards (G.640 Co-location longitudinally compatible interfaces for free space optical systems), ITU-Radiocommunication Sector standards (P.1817-1 Propagation data required for the design of terrestrial free-space optical links), and the IEEE Work in Progress - standardization activity on Visible Light Communications. International standards of FSO communications have been reviewed and discussed. ITU, IEC, and IEEE International standards for Free-Space Optical links have been reviewed. The system reliability and availability as well as security issues will be addressed as well in the talk.

A Formal Basis for Safety Case Patterns

NASA Technical Reports Server (NTRS)

Denney, Ewen; Pai, Ganesh

2013-01-01

By capturing common structures of successful arguments, safety case patterns provide an approach for reusing strategies for reasoning about safety. In the current state of the practice, patterns exist as descriptive specifications with informal semantics, which not only offer little opportunity for more sophisticated usage such as automated instantiation, composition and manipulation, but also impede standardization efforts and tool interoperability. To address these concerns, this paper gives (i) a formal definition for safety case patterns, clarifying both restrictions on the usage of multiplicity and well-founded recursion in structural abstraction, (ii) formal semantics to patterns, and (iii) a generic data model and algorithm for pattern instantiation. We illustrate our contributions by application to a new pattern, the requirements breakdown pattern, which builds upon our previous work

Safety risks with investigational drugs: Pharmacy practices and perceptions in the veterans affairs health system.

PubMed

Cruz, Jennifer L; Brown, Jamie N

2015-06-01

Rigorous practices for safe dispensing of investigational drugs are not standardized. This investigation sought to identify error-prevention processes utilized in the provision of investigational drug services (IDS) and to characterize pharmacists' perceptions about safety risks posed by investigational drugs. An electronic questionnaire was distributed to an audience of IDS pharmacists within the Veteran Affairs Health System. Multiple facets were examined including demographics, perceptions of medication safety, and standard processes used to support investigational drug protocols. Twenty-one respondents (32.8% response rate) from the Northeast, Midwest, South, West, and Non-contiguous United States participated. The mean number of pharmacist full-time equivalents (FTEs) dedicated to the IDS was 0.77 per site with 0.2 technician FTEs. The mean number of active protocols was 22. Seventeen respondents (81%) indicated some level of concern for safety risks. Concerns related to the packaging of medications were expressed, most notably lack of product differentiation, expiration dating, barcodes, and choice of font size or color. Regarding medication safety practices, the majority of sites had specific procedures in place for storing and securing drug supply, temperature monitoring, and prescription labeling. Repackaging bulk items and proactive error-identification strategies were less common. Sixty-seven percent of respondents reported that an independent double check was not routinely performed. Medication safety concerns exist among pharmacists in an investigational drug service; however, a variety of measures have been employed to improve medication safety practices. Best practices for the safe dispensing of investigational medications should be developed in order to standardize these error-prevention strategies.

Safety risks with investigational drugs: Pharmacy practices and perceptions in the veterans affairs health system

PubMed Central

Brown, Jamie N.

2015-01-01

Objectives: Rigorous practices for safe dispensing of investigational drugs are not standardized. This investigation sought to identify error-prevention processes utilized in the provision of investigational drug services (IDS) and to characterize pharmacists’ perceptions about safety risks posed by investigational drugs. Methods: An electronic questionnaire was distributed to an audience of IDS pharmacists within the Veteran Affairs Health System. Multiple facets were examined including demographics, perceptions of medication safety, and standard processes used to support investigational drug protocols. Results: Twenty-one respondents (32.8% response rate) from the Northeast, Midwest, South, West, and Non-contiguous United States participated. The mean number of pharmacist full-time equivalents (FTEs) dedicated to the IDS was 0.77 per site with 0.2 technician FTEs. The mean number of active protocols was 22. Seventeen respondents (81%) indicated some level of concern for safety risks. Concerns related to the packaging of medications were expressed, most notably lack of product differentiation, expiration dating, barcodes, and choice of font size or color. Regarding medication safety practices, the majority of sites had specific procedures in place for storing and securing drug supply, temperature monitoring, and prescription labeling. Repackaging bulk items and proactive error-identification strategies were less common. Sixty-seven percent of respondents reported that an independent double check was not routinely performed. Conclusions: Medication safety concerns exist among pharmacists in an investigational drug service; however, a variety of measures have been employed to improve medication safety practices. Best practices for the safe dispensing of investigational medications should be developed in order to standardize these error-prevention strategies. PMID:26240744

Capturing the imagination of nurse executives in tracking the quality of nursing care.

PubMed

Kurtzman, Ellen T; Jennings, Bonnie M

2008-01-01

Nurses represent the single largest healthcare profession in the United States. A growing evidence base demonstrates nursing's direct influence on inpatient safety and healthcare outcomes. Support for nursing's essential role in quality and patient safety and mounting interest in publicly reporting performance results have led to efforts to standardized nursing-sensitive performance measures. To this end, in 2004, the National Quality Forum endorsed a set of 15 nursing-sensitive consensus standards intended for use by the public in assessing inpatient nursing care. However, until recently, only anecdotal knowledge existed regarding the implementation of these consensus standards. As a step toward better understanding the interest in and adoption of nursing performance measures, The Robert Wood Johnson Foundation funded a study that concluded in March 2007. In this article, findings from the study are summarized as they apply to nursing leadership and implications for the future role of the nurse executive.

Measuring the Effect of Housing Quality Interventions: The Case of the New Zealand “Rental Warrant of Fitness”

PubMed Central

Telfar-Barnard, Lucy; Bennett, Julie; Howden-Chapman, Philippa; Jacobs, David E.; Ormandy, David; Cutler-Welsh, Matthew; Preval, Nicholas; Baker, Michael G.; Keall, Michael

2017-01-01

In New Zealand, as in many other countries, housing in the private-rental sector is in worse condition than in the owner-occupier housing sector. New Zealand residential buildings have no inspection regime after original construction signoff. Laws and regulations mandating standards for existing residential housing are outdated and spread over a range of instruments. Policies to improve standards in existing housing have been notoriously difficult to implement. In this methods paper, we describe the development and implementation of a rental Warrant of Fitness (WoF) intended to address these problems. Dwellings must pass each of 29 criteria for habitability, insulation, heating, ventilation, safety, amenities, and basic structural soundness to reach the WoF minimum standard. The WoF’s development was based on two decades of research on the impact of housing quality on health and wellbeing, and strongly influenced by the UK Housing Health and Safety Rating System and US federal government housing standards. Criteria were field-tested across a range of dwelling types and sizes, cities, and climate zones. The implementation stage of our WoF research consists of a non-random controlled quasi-experimental study in which we work with two city-level local government councils to implement the rental WoF, recruiting adjoining council areas as controls, and measuring changes in health, economic, and social outcomes. PMID:29112147

Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance.

PubMed

Ibrahim, Shewkar E; Sayed, Tarek; Ismail, Karim

2012-11-01

Several earlier studies have noted the shortcomings with existing geometric design guides which provide deterministic standards. In these standards the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from the standards. To mitigate these shortcomings, probabilistic geometric design has been advocated where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a mechanism for risk measurement to evaluate the safety impact of deviations from design standards. This paper applies reliability analysis for optimizing the safety of highway cross-sections. The paper presents an original methodology to select a suitable combination of cross-section elements with restricted sight distance to result in reduced collisions and consistent risk levels. The purpose of this optimization method is to provide designers with a proactive approach to the design of cross-section elements in order to (i) minimize the risk associated with restricted sight distance, (ii) balance the risk across the two carriageways of the highway, and (iii) reduce the expected collision frequency. A case study involving nine cross-sections that are parts of two major highway developments in British Columbia, Canada, was presented. The results showed that an additional reduction in collisions can be realized by incorporating the reliability component, P(nc) (denoting the probability of non-compliance), in the optimization process. The proposed approach results in reduced and consistent risk levels for both travel directions in addition to further collision reductions. Copyright © 2012 Elsevier Ltd. All rights reserved.

Improving Safety through Human Factors Engineering.

PubMed

Siewert, Bettina; Hochman, Mary G

2015-10-01

Human factors engineering (HFE) focuses on the design and analysis of interactive systems that involve people, technical equipment, and work environment. HFE is informed by knowledge of human characteristics. It complements existing patient safety efforts by specifically taking into consideration that, as humans, frontline staff will inevitably make mistakes. Therefore, the systems with which they interact should be designed for the anticipation and mitigation of human errors. The goal of HFE is to optimize the interaction of humans with their work environment and technical equipment to maximize safety and efficiency. Special safeguards include usability testing, standardization of processes, and use of checklists and forcing functions. However, the effectiveness of the safety program and resiliency of the organization depend on timely reporting of all safety events independent of patient harm, including perceived potential risks, bad outcomes that occur even when proper protocols have been followed, and episodes of "improvisation" when formal guidelines are found not to exist. Therefore, an institution must adopt a robust culture of safety, where the focus is shifted from blaming individuals for errors to preventing future errors, and where barriers to speaking up-including barriers introduced by steep authority gradients-are minimized. This requires creation of formal guidelines to address safety concerns, establishment of unified teams with open communication and shared responsibility for patient safety, and education of managers and senior physicians to perceive the reporting of safety concerns as a benefit rather than a threat. © RSNA, 2015.

The case for regulatory reform in the business and healthcare environments.

PubMed

Younis, Mustafa Z; Barhem, Belal; Hamidi, Samir; Inungu, Joseph; Prater, Gwendolyn S; O'Keefe, Arthur

2009-01-01

Government regulations affect corporations and consumers on a daily basis. For example, environmental and safety regulations in the workplace are administrated by the Occupational Safety and Health Administration (OSHA) under the Department of Labor. OSHA sets and enforces standards in work environment to ensure the safety and health of workers. Other regulatory agencies, such as the National Highway and Transportation Agency (NHTSA), oversee the transportation and the safety of the automobile and truck industry. The U.S. Food and Drug Administration (FDA) plays a major role in approving new drugs on the market and in monitoring drug safety, and it has the power to remove drugs from the market if they are proved to be safety and health problems to the public. However, the mere existence of these regulations often causes impediments to businesses, and the extent of their ultimate usefulness is examined and analyzed in this paper

Plutonium storage criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chung, D.; Ascanio, X.

1996-05-01

The Department of Energy has issued a technical standard for long-term (>50 years) storage and will soon issue a criteria document for interim (<20 years) storage of plutonium materials. The long-term technical standard, {open_quotes}Criteria for Safe Storage of Plutonium Metals and Oxides,{close_quotes} addresses the requirements for storing metals and oxides with greater than 50 wt % plutonium. It calls for a standardized package that meets both off-site transportation requirements, as well as remote handling requirements from future storage facilities. The interim criteria document, {open_quotes}Criteria for Interim Safe Storage of Plutonium-Bearing Solid Materials{close_quotes}, addresses requirements for storing materials with less thanmore » 50 wt% plutonium. The interim criteria document assumes the materials will be stored on existing sites, and existing facilities and equipment will be used for repackaging to improve the margin of safety.« less

Safety assessment in macaques of light exposures for functional two-photon ophthalmoscopy in humans

PubMed Central

Schwarz, Christina; Sharma, Robin; Fischer, William S.; Chung, Mina; Palczewska, Grazyna; Palczewski, Krzysztof; Williams, David R.; Hunter, Jennifer J.

2016-01-01

Two-photon ophthalmoscopy has potential for in vivo assessment of function of normal and diseased retina. However, light safety of the sub-100 fs laser typically used is a major concern and safety standards are not well established. To test the feasibility of safe in vivo two-photon excitation fluorescence (TPEF) imaging of photoreceptors in humans, we examined the effects of ultrashort pulsed light and the required light levels with a variety of clinical and high resolution imaging methods in macaques. The only measure that revealed a significant effect due to exposure to pulsed light within existing safety standards was infrared autofluorescence (IRAF) intensity. No other structural or functional alterations were detected by other imaging techniques for any of the exposures. Photoreceptors and retinal pigment epithelium appeared normal in adaptive optics images. No effect of repeated exposures on TPEF time course was detected, suggesting that visual cycle function was maintained. If IRAF reduction is hazardous, it is the only hurdle to applying two-photon retinal imaging in humans. To date, no harmful effects of IRAF reduction have been detected. PMID:28018732

The three Rs of fire safety, emergency action, and fire prevention planning: promoting safety at the worksite.

PubMed

Thompson, Marcella R

2003-04-01

Fire safety is of paramount importance for everyone. In many workplaces, the occupational health nurse's scope of practice encompasses safety related activities. Included within this role is the responsibility for fire safety, emergency action, and fire prevention planning. The Three Rs of fire safety, emergency action, and fire prevention plans are rules, responsibilities, and resources. Myriad building and fire safety codes, regulations, and standards exist with which an employer must comply. An employer's responsibility for installing, testing, inspecting, and maintaining fire safety related equipment is extensive. Emergency action and fire prevention planning begins with conducting a detailed physical survey and preparing site maps. It includes making key policy decisions, writing procedures, and training employees in those procedures by practicing and executing site drills. The best resources available for emergency planning are the local fire department and the property insurer. Planning ahead means an efficient emergency response if disaster strikes. It saves lives, limits property damage, and preserves the environment.

Implications of human tissue studies for radiation protection.

PubMed

Kathren, R L

1988-08-01

Through radiochemical analysis of voluntary tissue donations, the U.S. Transuranium and Uranium Registries (USTR) are gaining improved understanding of the distribution and biokinetics of actinide elements in occupationally exposed persons. Evaluation of the first two whole-body contributions to the USTR revealed an inverse proportionality between actinide concentration and bone ash. The analysis of a whole body with significant 241Am deposition indicated a significantly shorter half-time in liver and a greater fraction resident in the skeleton than predicted by existing models. Other studies with tissues obtained at autopsy suggest that existing biokinetic models for 238Pu and 241Am and the currently accepted models and limits on intake, which use these models as their basis, may be inaccurately implying that revisions of existing safety standards may be necessary. Other studies of the registries are designed to evaluate in-vivo estimates of actinide deposition with those derived from postmortem tissue analysis, to compare results of animal experiments with human data, and to review histopathologic slides for tissue changes that might be attributable to exposure to transuranic elements. The implications of these recent findings and other work of the registries is discussed from the standpoint of this potential effect on biokinetic modeling, internal dose assessment, and safety standards and operational health physics practices.

Implications of human tissue studies for radiation protection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kathren, R.L.

1988-08-01

Through radiochemical analysis of voluntary tissue donations, the U.S. Transuranium and Uranium Registries (USTR) are gaining improved understanding of the distribution and biokinetics of actinide elements in occupationally exposed persons. Evaluation of the first two whole-body contributions to the USTR revealed an inverse proportionality between actinide concentration and bone ash. The analysis of a whole body with significant /sup 241/Am deposition indicated a significantly shorter half-time in liver and a greater fraction resident in the skeleton than predicted by existing models. Other studies with tissues obtained at autopsy suggest that existing biokinetic models for /sup 238/Pu and /sup 241/Am andmore » the currently accepted models and limits on intake, which use these models as their basis, may be inaccurately implying that revisions of existing safety standards may be necessary. Other studies of the registries are designed to evaluate in-vivo estimates of actinide deposition with those derived from postmortem tissue analysis, to compare results of animal experiments with human data, and to review histopathologic slides for tissue changes that might be attributable to exposure to transuranic elements. The implications of these recent findings and other work of the registries is discussed from the standpoint of this potential effect on biokinetic modeling, internal dose assessment, and safety standards and operational health physics practices.« less

Hemovigilance in Massachusetts and the adoption of statewide hospital blood bank reporting using the National Healthcare Safety Network.

PubMed

Cumming, Melissa; Osinski, Anthony; O'Hearn, Lynne; Waksmonski, Pamela; Herman, Michele; Gordon, Deborah; Griffiths, Elzbieta; Knox, Kim; McHale, Eileen; Quillen, Karen; Rios, Jorge; Pisciotto, Patricia; Uhl, Lynne; DeMaria, Alfred; Andrzejewski, Chester

2017-02-01

A collaboration that grew over time between local hemovigilance stakeholders and the Massachusetts Department of Public Health (MDPH) resulted in the change from a paper-based method of reporting adverse reactions and monthly transfusion activity for regulatory compliance purposes to statewide adoption of electronic reporting via the National Healthcare Safety Network (NHSN). The NHSN is a web-based surveillance system that offers the capacity to capture transfusion-related adverse events, incidents, and monthly transfusion statistics from participating facilities. Massachusetts' hospital blood banks share the data they enter into NHSN with the MDPH to satisfy reporting requirements. Users of the NHSN Hemovigilance Module adhere to specified data entry guidelines, resulting in data that are comparable and standardized. Keys to successful statewide adoption of this reporting method include the fostering of strong partnerships with local hemovigilance champions and experts, engagement of regulatory and epidemiology divisions at the state health department, the leveraging of existing relationships with hospital NHSN administrators, and the existence of a regulatory deadline for implementation. Although limitations exist, successful implementation of statewide use of the NHSN Hemovigilance Module for hospital blood bank reporting is possible. The result is standardized, actionable data at both the hospital and state level that can facilitate interfacility comparisons, benchmarking, and opportunities for practice improvement. © 2016 AABB.

76 FR 50669 - Safety Zones; Eleventh Coast Guard District Annual Fireworks Events

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-16

... occurring, add new unlisted annual fireworks events to the regulations, and standardize the format for all... to be added. In addition, information for those events that continue to occur has changed in some... sections will be updated or added as follows: update with current information existing events, add...

77 FR 14438 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... the Code of Federal Regulations (30 CFR), part 44 govern the application, processing, and disposition.... Regulation Affected: 30 CFR 75.1200(d) & (i) Mine map). Modification Request: The petitioner requests a... affected area. The petitioner asserts that the proposed alternative method will provide no less than the...

78 FR 42977 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-18

...-008-M. Petitioner: U.S. Silver Idaho, Inc., 1801 California Street, Suite 4900, Denver, Colorado 80202... Limited, 1801 California Street, Suite 4900, Denver, Colorado 80202. Mine: Lucky Friday Mine, MSHA I.D. No... ribs' structure stability. (1) The Gold Hunter portion of the Lucky Friday mine is a deep mining...

77 FR 14426 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... Granite Company, LLC, 369 North State Street, Concord, New Hampshire 03301. Mine: Swenson Granite gray... Swenson Granite Gray Quarry is an open dimensional granite quarry operating fixed stiffleg derricks to... granite product if it can not be seen. (6) The quarry employees direct all derrick moves and positioning...

77 FR 38667 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-28

... request. (d) A qualified person as defined in 30 CFR 75.151 will continuously monitor for methane.... (e) Nonpermissible surveying equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while the...

77 FR 19722 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

... request. (d) A qualified person as defined in 30 CFR 75.151 will continuously monitor for methane.... (e) Nonpermissible surveying equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while the...

77 FR 37926 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-25

... defined in 30 CFR 75.151 will continuously monitor for methane immediately before and during the use of... electronic testing and diagnostic equipment will not be used if methane is detected in concentrations at or above one percent. When one percent or more methane is detected while the nonpermissible electronic...

78 FR 3032 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-15

... request. (d) A qualified person as defined in 30 CFR 75.151 will continuously monitor for methane.... (e) Nonpermissible surveying equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while the...

78 FR 55297 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-10

... request. (d) A qualified person as defined in 30 CFR 75.151 will continuously monitor for methane.... (e) Nonpermissible surveying equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while the...

76 FR 37831 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... strata breakage for the mine; (2) to facilitate methane drainage, degasification casing of suitable... on the shift prior to mining through the well. The methane monitor(s) on the continuous mining.... (8) When mining is in progress, tests for methane will be made with a hand-held methane detector at...

75 FR 75498 - Petitions for Modification of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-03

... 75.151 will continuously monitor for methane immediately before and during the use of non... if methane is detected in concentrations at or above 1.0 percent methane; (4) when 1.0 percent or more of methane is detected while the non-permissible electronic equipment is being used, the equipment...

77 FR 38324 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... person as defined in 30 CFR 75.151 will continuously monitor for methane immediately before and during... surveying equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while the nonpermissible surveying...

77 FR 14430 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

....151 will continuously monitor for methane immediately before and during the use of non-permissible... used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while the non- permissible surveying equipment is being used, the...

76 FR 22148 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

..., grounded phase, under-voltage, and ground monitoring protection; (b) the trailing cable short-circuit... activated; (c) the solenoid valves will be connected to the CO monitoring system through PLC programming... surface location, either the CO monitoring room or the security station. Either, two miners on each shift...

46 CFR 154.12 - Existing gas vessel: Endorsements and requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

....12 Section 154.12 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.12...) Section 154.534. (9) Section 154.538. (10) Section 154.540 (c) and (d). (11) Section 154.556. (12) Section...

46 CFR 154.12 - Existing gas vessel: Endorsements and requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

....12 Section 154.12 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.12...) Section 154.534. (9) Section 154.538. (10) Section 154.540 (c) and (d). (11) Section 154.556. (12) Section...

46 CFR 154.12 - Existing gas vessel: Endorsements and requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

....12 Section 154.12 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.12...) Section 154.534. (9) Section 154.538. (10) Section 154.540 (c) and (d). (11) Section 154.556. (12) Section...

76 FR 22152 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... Mine, MSHA I.D. No. 36-08850. Regulation Affected: 30 CFR 75.503 (Permissible electric face equipment... Mobile Bridge Conveyors, Dual Boom Roof Bolters, Continuous Miners, and Shuttle Cars. The petitioner... current to Roof Bolters and Shuttle Cars. The cables will have a 90 degree insulation rating. Additionally...

77 FR 812 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... (Permissible electric face equipment; maintenance). Modification Request: The petitioner requests a... its shuttle cars, roof bolters, and mobile roof supports at the Campbells Creek No. 7 Mine and Blue...-volt shuttle cars, 480-volt roof bolters, and 480-volt mobile roof supports will not exceed 900 feet...

76 FR 31453 - Special Conditions: Gulfstream Model GVI Airplane; Single-Occupant Side-Facing Seats

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-01

.... SID TTI data must be processed as defined in Federal Motor Vehicle Safety Standard (FMVSS) part 571...). Pass/fail injury assessments: TTI and pelvic acceleration. 2. One longitudinal test with the Hybrid II... pelvic acceleration. 3. Vertical (14g) test with modified Hybrid II ATDs using existing pass/fail...

77 FR 75066 - Special Conditions: Airbus, A350-900 Series Airplane; Flight Envelope Protection (Icing and Non...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-19

... Protection (Icing and Non-Icing Conditions); High Incidence Protection and Alpha-Floor Systems AGENCY... or unusual design features associated with flight envelope protection in icing and non- icing... establish a level of safety equivalent to that established by the existing airworthiness standards. DATES...

76 FR 54802 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-02

... well. The active working place will be kept free from accumulations of coal dust and coal spillage... approved mine ventilation plan, whichever is greater, will be delivered to the working place. (19) All..., all equipment in the working place will be deenergized and the place thoroughly examined and...

Development of an Industry Training Strategy for the Abattoir Industry in New South Wales.

ERIC Educational Resources Information Center

Clements, Andrew; Speers, Geoff

The abattoir (meat processing) industry is facing a number of challenges in Australia, including introduction of technology, safety standards, restructuring, and development and implementation of an effective training culture. The training strategy will effectively target existing training resources for the industry and upskill employees in a…

46 CFR 154.22 - Foreign flag vessel: Certificate of Compliance endorsement application.

Code of Federal Regulations, 2012 CFR

2012-10-01

... (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.22 Foreign flag vessel: Certificate of Compliance endorsement application. (a... vessel meets § 154.1725(a) (4), (5), and (7). (9) If the vessel is a new gas vessel, or an existing...

46 CFR 154.22 - Foreign flag vessel: Certificate of Compliance endorsement application.

Code of Federal Regulations, 2011 CFR

2011-10-01

... (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES General § 154.22 Foreign flag vessel: Certificate of Compliance endorsement application. (a... vessel meets § 154.1725(a) (4), (5), and (7). (9) If the vessel is a new gas vessel, or an existing...

Quality assurance for gamma knives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, E.D.; Banks, W.W.; Fischer, L.E.

1995-09-01

This report describes and summarizes the results of a quality assurance (QA) study of the Gamma Knife, a nuclear medical device used for the gamma irradiation of intracranial lesions. Focus was on the physical aspects of QA and did not address issues that are essentially medical, such as patient selection or prescription of dose. A risk-based QA assessment approach was used. Sample programs for quality control and assurance are included. The use of the Gamma Knife was found to conform to existing standards and guidelines concerning radiation safety and quality control of external beam therapies (shielding, safety reviews, radiation surveys,more » interlock systems, exposure monitoring, good medical physics practices, etc.) and to be compliant with NRC teletherapy regulations. There are, however, current practices for the Gamma Knife not covered by existing, formalized regulations, standards, or guidelines. These practices have been adopted by Gamma Knife users and continue to be developed with further experience. Some of these have appeared in publications or presentations and are slowly finding their way into recommendations of professional organizations.« less

Patient Safety Incident Reporting: Current Trends and Gaps Within the Canadian Health System.

PubMed

Boucaud, Sarah; Dorschner, Danielle

2016-01-01

Patient safety incidents are a national-level phenomenon, requiring a pan-Canadian approach to ensure that incidents are reported and lessons are learned and broadly disseminated. This work explores the variation in current provincial and local approaches to reporting through a literature review. Trends are consolidated and recommendations are offered to foster better alignment of existing systems. These include adopting a common terminology, defining the patient role in reporting, increasing system users' perception of safety and further investigating the areas of home and community care in ensuring standard approaches at the local level. These steps can promote alignment, reducing barriers to a future pan-Canadian reporting and learning system.

Nonstandard work arrangements and worker health and safety.

PubMed

Howard, John

2017-01-01

Arrangements between those who perform work and those who provide jobs come in many different forms. Standard work arrangements now exist alongside several nonstandard arrangements: agency work, contract work, and gig work. While standard work arrangements are still the most prevalent types, the rise of nonstandard work arrangements, especially temporary agency, contract, and "gig" arrangements, and the potential effects of these new arrangements on worker health and safety have captured the attention of government, business, labor, and academia. This article describes the major work arrangements in use today, profiles the nonstandard workforce, discusses several legal questions about how established principles of labor and employment law apply to nonstandard work arrangements, summarizes findings published in the past 20 years about the health and safety risks for workers in nonstandard work arrangements, and outlines current research efforts in the area of healthy work design and worker well-being. Am. J. Ind. Med. 60:1-10, 2017. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Regulatory experience in applying a radiological environmental protection framework for existing and planned nuclear facilities.

PubMed

Mihok, S; Thompson, P

2012-01-01

Frameworks and methods for the radiological protection of non-human biota have been evolving rapidly at the International Commission on Radiological Protection and through various European initiatives. The International Atomic Energy Agency has incorporated a requirement for environmental protection in the latest revision of its Basic Safety Standards. In Canada, the Canadian Nuclear Safety Commission has been legally obligated to prevent unreasonable risk to the environment since 2000. Licensees have therefore been meeting generic legal requirements to demonstrate adequate control of releases of radioactive substances for the protection of both people and biota for many years. In the USA, in addition to the generic requirements of the Environmental Protection Agency and the Nuclear Regulatory Commission, Department of Energy facilities have also had to comply with specific dose limits after a standard assessment methodology was finalised in 2002. Canadian regulators developed a similar framework for biota dose assessment through a regulatory assessment under the Canadian Environmental Protection Act in the late 1990s. Since then, this framework has been applied extensively to satisfy legal requirements under the Canadian Environmental Assessment Act and the Nuclear Safety and Control Act. After approximately a decade of experience in applying these methods, it is clear that simple methods are fit for purpose, and can be used for making regulatory decisions for existing and planned nuclear facilities. Copyright © 2012. Published by Elsevier Ltd.

The History of Infant Formula: Quality, Safety, and Standard Methods.

PubMed

Wargo, Wayne F

2016-01-01

Food-related laws and regulations have existed since ancient times. Egyptian scrolls prescribed the labeling needed for certain foods. In ancient Athens, beer and wines were inspected for purity and soundness, and the Romans had a well-organized state food control system to protect consumers from fraud or bad produce. In Europe during the Middle Ages, individual countries passed laws concerning the quality and safety of eggs, sausages, cheese, beer, wine, and bread; some of these laws still exist today. But more modern dietary guidelines and food regulations have their origins in the latter half of the 19th century when the first general food laws were adopted and basic food control systems were implemented to monitor compliance. Around this time, science and food chemistry began to provide the tools to determine "purity" of food based primarily on chemical composition and to determine whether it had been adulterated in any way. Since the key chemical components of mammalian milk were first understood, infant formulas have steadily advanced in complexity as manufacturers attempt to close the compositional gap with human breast milk. To verify these compositional innovations and ensure product quality and safety, infant formula has become one of the most regulated foods in the world. The present paper examines the historical development of nutritional alternatives to breastfeeding, focusing on efforts undertaken to ensure the quality and safety from antiquity to present day. The impact of commercial infant formulas on global regulations is addressed, along with the resulting need for harmonized, fit-for-purpose, voluntary consensus standard methods.

78 FR 69135 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-18

..., because there is a chance that the water can become polluted from some external event such as a fire or...) The nature of any emergency itself could cause an external water supply to be polluted, choked, or... Affected: 30 CFR 75.1101-1(b) (Deluge-type water spray systems). Modification Request: The petitioner...

78 FR 29384 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

... sprinkler system will not be less than 10 psi with any eight sprinklers open. The supply of water will be... in Routt County, Colorado. Regulation Affected: 30 CFR 75.1101-7(a) (Installation of water sprinkler... of 10 psi. The pressure will not exceed 250 psi when the sprays are operating. 4. Each water...

76 FR 48009 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-08

... of the license plate holder. Ford requested that the paragraph be deleted, claiming that the rear license plate holder is not a lamp, reflective device, or piece of associated equipment and is not... the existing incorporation by reference only applied to the lamps, and not to the license plate holder...

76 FR 2722 - Petitions for Modification of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-14

.... Sufficient supplies of ventilation materials will be available near the working face; (7) The methane monitor... points; (9) When mining is in progress, tests for methane will be made with a handheld methane detector... until the well is mined through; (11) If methane is detected 1-foot from the rib and 1-foot above the...

77 FR 77113 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... for methane immediately before and during the use of nonpermissible surveying equipment in or inby the last open crosscut. (e) Nonpermissible surveying equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while...

30 CFR 57.22004 - Category placement or change in placement.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MINES Safety Standards for Methane in Metal and Nonmetal Mines Mine Categorization § 57.22004 Category... conditions set forth in § 57.22003(b) indicate that the hazards of methane exist under circumstances more... events occur: (1) An outburst that results in 0.25 percent or more methane in the mine atmosphere; (2) A...

76 FR 37838 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-28

... may include periodic tests of methane levels and limits on the minimum methane concentrations that may...) Methane monitor(s) will be calibrated on the longwall, continuous mining machine, or cutting machine and... petitioner will test for methane with a hand-held methane detector at least every 10 minutes from the time...

77 FR 57157 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... for methane immediately before and during the use of nonpermissible surveying equipment in or inby the last open crosscut. (e) Nonpermissible surveying equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while...

78 FR 59723 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-27

... person as defined in 30 CFR 75.151 will continuously monitor for methane immediately before and during... equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while the nonpermissible surveying equipment is...

78 FR 49774 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

... the well. (7) Calibrate the methane monitors on the longwall, continuous mining machine, or cutting..., test methane levels with a hand- held methane detector at least every 10 minutes from the time that... methane levels are less than 1.0 percent in all areas that will be exposed to flames and sparks from the...

78 FR 36598 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-18

.... Petitions for Modification Docket No: M-2013-024-C. Petitioner: Wolf Run Mining Company, 99 Edmiston Way.... Docket No: M-2013-025-C. Petitioner: Wolf Run Mining Company, 99 Edmiston Way, Buckhannon, West Virginia.... Docket No: M-2013-026-C. Petitioner: Wolf Run Mining Company, 99 Edmiston Way, Buckhannon, West Virginia...

Advanced bridge safety initiative : phase 2, task 2 - effects of curb and railing inclusion on rating factors of reinforced concrete flat slab bridges using finite element analysis.

DOT National Transportation Integrated Search

2017-03-01

The Maine Department of Transportation (Maine DOT) owns a number of existing reinforced concrete slab : bridges that utilize the standard Maine concrete bridge rail. At issue is the additional stiffening and strengthening : that the curb and this rai...

78 FR 78390 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

.... Regulation Affected: 30 CFR 75.503 (Permissible electric face equipment; maintenance), (18.35(a)(5)(i... equipment. The petitioner states that: 1. Mine cars and locomotives will not be coupled or uncoupled while... installed in lieu of the automatic couplers. 3. Connecting pins used to secure tow bars to mine cars or...

78 FR 50317 - Special Conditions: Cessna Aircraft Company, Model J182T; Diesel Cycle Engine Installation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... equivalent to that established by the existing airworthiness standards. DATES: Effective Date: August 19... addition, the J182T certification basis includes special conditions and equivalent levels of safety. If the... Sec. 23.961 and adds the possibility of testing non- aviation diesel fuels. To ensure fuel system...

77 FR 27092 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-08

... electronic equipment and requires more exposure of surveyors to hazardous mining environments. (2... that the equipment is being maintained in a safe operating condition prior to use in or inby the last... mine workings above and below to those present within 100 feet of the vein(s) being mined unless these...

78 FR 70321 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-25

.... (9) Keep the working place free from accumulations of coal dust and coal spillages, and place rock... been intersected and the working place determined safe, continue mining inby the well at a distance... perforating multiple strings. (3) Place a mechanical bridge plug in the well if a cleaned-out well emits...

77 FR 25205 - Proposed Extension of Existing Information Collection; Roof Control Plans for Underground Coal Mines

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-27

... assure that requested data can be provided in the desired format, reporting burden (time and financial... request on September 28, 2009. The package expires on September 30, 2012. DATES: All comments must be... safety and health standards. MSHA has updated the data in respect to the number of respondents and...

30 CFR 57.22004 - Category placement or change in placement.

Code of Federal Regulations, 2011 CFR

2011-07-01

... MINES Safety Standards for Methane in Metal and Nonmetal Mines Mine Categorization § 57.22004 Category... conditions set forth in § 57.22003(b) indicate that the hazards of methane exist under circumstances more... events occur: (1) An outburst that results in 0.25 percent or more methane in the mine atmosphere; (2) A...

[Expert investigation on food safety standard system framework construction in China].

PubMed

He, Xiang; Yan, Weixing; Fan, Yongxiang; Zeng, Biao; Peng, Zhen; Sun, Zhenqiu

2013-09-01

Through investigating food safety standard framework among food safety experts, to summarize the basic elements and principles of food safety standard system, and provide policy advices for food safety standards framework. A survey was carried out among 415 experts from government, professional institutions and the food industry/enterprises using the National Food Safety Standard System Construction Consultation Questionnaire designed in the name of the Secretariat of National Food Safety Standard Committee. Experts have different advices in each group about the principles of food product standards, food additive product standards, food related product standards, hygienic practice, test methods. According to the results, the best solution not only may reflect experts awareness of the work of food safety standards situation, but also provide advices for setting and revision of food safety standards for the next. Through experts investigation, the framework and guiding principles of food safety standard had been built.

An evaluation of two conducted electrical weapons and two probe designs using a swine comparative cardiac safety model.

PubMed

Dawes, Donald Murray; Ho, Jeffrey D; Moore, Johanna C; Miner, James R

2013-09-01

Despite human laboratory and field studies that have demonstrated a reasonable safety profile for TASER brand conducted electrical weapons (CEW), the results of some swine studies and arrest related deaths temporal to the use of the CEWs continue to raise questions regarding cardiac safety. TASER International, Inc., has released a new CEW, the TASER X2, touted to have a better safety profile than its long-standing predecessor, the TASER X26. We have developed a model to assess the relative cardiac safety of CEWs and used it to compare the TASER X2 and the TASER X26. This safety model was also used to assess the relative safety of an experimental probe design as compared to the standard steel probe. Our results suggest that the TASER X2 has an improved safety margin over the TASER X26. The new probe design also has promise for enhanced cardiac safety, although may have some disadvantages when compared to the existing design which would make field use impractical.

Seismic assessment of Technical Area V (TA-V).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Medrano, Carlos S.

The Technical Area V (TA-V) Seismic Assessment Report was commissioned as part of Sandia National Laboratories (SNL) Self Assessment Requirement per DOE O 414.1, Quality Assurance, for seismic impact on existing facilities at Technical Area-V (TA-V). SNL TA-V facilities are located on an existing Uniform Building Code (UBC) Seismic Zone IIB Site within the physical boundary of the Kirtland Air Force Base (KAFB). The document delineates a summary of the existing facilities with their safety-significant structure, system and components, identifies DOE Guidance, conceptual framework, past assessments and the present Geological and Seismic conditions. Building upon the past information and themore » evolution of the new seismic design criteria, the document discusses the potential impact of the new standards and provides recommendations based upon the current International Building Code (IBC) per DOE O 420.1B, Facility Safety and DOE G 420.1-2, Guide for the Mitigation of Natural Phenomena Hazards for DOE Nuclear Facilities and Non-Nuclear Facilities.« less

Electric fence standards comport with human data and AC limits.

PubMed

Kroll, Mark W; Perkins, Peter E; Panescu, Dorin

2015-08-01

The ubiquitous electric fence is essential to modern agriculture and has saved lives by reducing the number of livestock automobile collisions. Modern safety standards such as IEC 60335-2-76 and UL 69 have played a role in this positive result. However, these standards are essentially based on energy and power (RMS current), which have limited direct relationship to cardiac effects. We compared these standards to bioelectrically more relevant units of charge and average current in view of recent work on VF (ventricular fibrillation) induction and to existing IEC AC current limits. There are 3 limits for normal (low) pulsing rate: IEC energy limit, IEC current limit, and UL current limit. We then calculated the delivered charge allowed for each pulse duration for these limits and then compared them to a charge-based safety model derived from published human ventricular-fibrillation induction data. Both the IEC and UL also allow for rapid pulsing for up to 3 minutes. We calculated maximum outputs for various pulse durations assuming pulsing at 10, 20, and 30 pulses per second. These were then compared to standard utility power safety (AC) limits via the conversion factor of 7.4 to convert average current to RMS current for VF risk. The outputs of TASER electrical weapons (typically < 100 μC and ~100 μs duration) were also compared. The IEC and UL electric fence energizer normal rate standards are conservative in comparison with actual human laboratory experiments. The IEC and UL electric fence energizer rapid-pulsing standards are consistent with accepted IEC AC current limits for commercially used pulse durations.

Applying Human Factors Principles to Mitigate Usability Issues Related to Embedded Assumptions in Health Information Technology Design

PubMed Central

Lowry, Svetlana Z; Patterson, Emily S

2014-01-01

Background There is growing recognition that design flaws in health information technology (HIT) lead to increased cognitive work, impact workflows, and produce other undesirable user experiences that contribute to usability issues and, in some cases, patient harm. These usability issues may in turn contribute to HIT utilization disparities and patient safety concerns, particularly among “non-typical” HIT users and their health care providers. Health care disparities are associated with poor health outcomes, premature death, and increased health care costs. HIT has the potential to reduce these disparate outcomes. In the computer science field, it has long been recognized that embedded cultural assumptions can reduce the usability, usefulness, and safety of HIT systems for populations whose characteristics differ from “stereotypical” users. Among these non-typical users, inappropriate embedded design assumptions may contribute to health care disparities. It is unclear how to address potentially inappropriate embedded HIT design assumptions once detected. Objective The objective of this paper is to explain HIT universal design principles derived from the human factors engineering literature that can help to overcome potential usability and/or patient safety issues that are associated with unrecognized, embedded assumptions about cultural groups when designing HIT systems. Methods Existing best practices, guidance, and standards in software usability and accessibility were subjected to a 5-step expert review process to identify and summarize those best practices, guidance, and standards that could help identify and/or address embedded design assumptions in HIT that could negatively impact patient safety, particularly for non-majority HIT user populations. An iterative consensus-based process was then used to derive evidence-based design principles from the data to address potentially inappropriate embedded cultural assumptions. Results Design principles that may help identify and address embedded HIT design assumptions are available in the existing literature. Conclusions Evidence-based HIT design principles derived from existing human factors and informatics literature can help HIT developers identify and address embedded cultural assumptions that may underlie HIT-associated usability and patient safety concerns as well as health care disparities. PMID:27025349

Applying Human Factors Principles to Mitigate Usability Issues Related to Embedded Assumptions in Health Information Technology Design.

PubMed

Gibbons, Michael C; Lowry, Svetlana Z; Patterson, Emily S

2014-12-18

There is growing recognition that design flaws in health information technology (HIT) lead to increased cognitive work, impact workflows, and produce other undesirable user experiences that contribute to usability issues and, in some cases, patient harm. These usability issues may in turn contribute to HIT utilization disparities and patient safety concerns, particularly among "non-typical" HIT users and their health care providers. Health care disparities are associated with poor health outcomes, premature death, and increased health care costs. HIT has the potential to reduce these disparate outcomes. In the computer science field, it has long been recognized that embedded cultural assumptions can reduce the usability, usefulness, and safety of HIT systems for populations whose characteristics differ from "stereotypical" users. Among these non-typical users, inappropriate embedded design assumptions may contribute to health care disparities. It is unclear how to address potentially inappropriate embedded HIT design assumptions once detected. The objective of this paper is to explain HIT universal design principles derived from the human factors engineering literature that can help to overcome potential usability and/or patient safety issues that are associated with unrecognized, embedded assumptions about cultural groups when designing HIT systems. Existing best practices, guidance, and standards in software usability and accessibility were subjected to a 5-step expert review process to identify and summarize those best practices, guidance, and standards that could help identify and/or address embedded design assumptions in HIT that could negatively impact patient safety, particularly for non-majority HIT user populations. An iterative consensus-based process was then used to derive evidence-based design principles from the data to address potentially inappropriate embedded cultural assumptions. Design principles that may help identify and address embedded HIT design assumptions are available in the existing literature. Evidence-based HIT design principles derived from existing human factors and informatics literature can help HIT developers identify and address embedded cultural assumptions that may underlie HIT-associated usability and patient safety concerns as well as health care disparities.

Report on SARS backfit evaluation, Exxon Donor Solvent Plant, Baytown, Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, A.F. Jr.

1980-07-02

This report provides information on observations, findings, and conclusions arising from a site visit to the Exxon Donor Solvent Plant, Baytown, Texas. That visit was to provide technical assistance and professional services to the DOE/ASFE/OPTA Project Officer regarding verification of his initial determination that this pilot plant is exempt from the SARS backfit requirement (DOE Order 5481.1). A secondary purpose was to obtain further information regarding the occupational safety and health plans and procedures at this new pilot plant facility. It is concluded that a well planned and implemented occupational safety and health program exists at the Exxon Donor Solventmore » Plant. Excellent manuals regarding general safety requirements and protection against carcinogens have been prepared and distributed. A Safe Operations Committee is in effect as is a Risk Management Committee. Adequate safety and industrial hygiene staff has been assigned and an excellent medical surveillance program has been established. Adequate compliance with environmental codes, standards, and regulations is being achieved. Although this plant is not subject to SARS because of the nature of the contract, adequate documentation exists in any case to exempt it from the SARS backfit requirement.« less

Applicability of the Common Safety Method for Risk Evaluation and Assessment (CSM-RA) to the Space Domain

NASA Astrophysics Data System (ADS)

Moreira, Francisco; Silva, Nuno

2016-08-01

Safety systems require accident avoidance. This is covered by application standards, processes, techniques and tools that support the identification, analysis, elimination or reduction to an acceptable level of system risks and hazards. Ideally, a safety system should be free of hazards. However, both industry and academia have been struggling to ensure appropriate risk and hazard analysis, especially in what concerns completeness of the hazards, formalization, and timely analysis in order to influence the specifications and the implementation. Such analysis is also important when considering a change to an existing system. The Common Safety Method for Risk Evaluation and Assessment (CSM- RA) is a mandatory procedure whenever any significant change is proposed to the railway system in a European Member State. This paper provides insights on the fundamentals of CSM-RA based and complemented with Hazard Analysis. When and how to apply them, and the relation and similarities of these processes with industry standards and the system life cycles is highlighted. Finally, the paper shows how CSM-RA can be the basis of a change management process, guiding the identification and management of the hazards helping ensuring the similar safety level as the initial system. This paper will show how the CSM-RA principles can be used in other domains particularly for space system evolution.

A proposal for seismic evaluation index of mid-rise existing RC buildings in Afghanistan

NASA Astrophysics Data System (ADS)

Naqi, Ahmad; Saito, Taiki

2017-10-01

Mid-rise RC buildings gradually rise in Kabul and entire Afghanistan since 2001 due to rapid increase of population. To protect the safety of resident, Afghan Structure Code was issued in 2012. But the building constructed before 2012 failed to conform the code requirements. In Japan, new sets of rules and law for seismic design of buildings had been issued in 1981 and severe earthquake damage was disclosed for the buildings designed before 1981. Hence, the Standard for Seismic Evaluation of RC Building published in 1977 has been widely used in Japan to evaluate the seismic capacity of existing buildings designed before 1981. Currently similar problem existed in Afghanistan, therefore, this research examined the seismic capacity of six RC buildings which were built before 2012 in Kabul by applying the seismic screening procedure presented by Japanese standard. Among three screening procedures with different capability, the less detailed screening procedure, the first level of screening, is applied. The study founds an average seismic index (IS-average=0.21) of target buildings. Then, the results were compared with those of more accurate seismic evaluation procedures of Capacity Spectrum Method (CSM) and Time History Analysis (THA). The results for CSM and THA show poor seismic performance of target buildings not able to satisfy the safety design limit (1/100) of the maximum story drift. The target buildings are then improved by installing RC shear walls. The seismic indices of these retrofitted buildings were recalculated and the maximum story drifts were analyzed by CSM and THA. The seismic indices and CSM and THA results are compared and found that building with seismic index larger than (IS-average =0.4) are able to satisfy the safety design limit. Finally, to screen and minimize the earthquake damage over the existing buildings, the judgement seismic index (IS-Judgment=0.5) for the first level of screening is proposed.

Policy on Hazard Analysis and Critical Control Point (HACCP) and adherence to food preparation guidelines: a cross sectional survey of stakeholders in food service in Kumasi, Ghana.

PubMed

Agyei-Baffour, Peter; Sekyere, Kofi Boateng; Addy, Ernestine Akosua

2013-11-04

Food borne diseases claim more lives and are growing public health concerns. Simple preventive techniques such as adoption and adherence to hazard analysis and critical control point (HACCP) policy can significantly reduce this disease burden. Though food screening and inspection are done, the ultimate regulation, Hazard Analysis and Critical Control Point, which is known and accepted worldwide, appears not to be popular among food operators in Ghana. This paper examines the level of awareness of the existence of policy on hazard analysis and critical control point (HACCP) and its adherence to food preparation guidelines among food service providers in Ghana. The results revealed the mean age of food providers as 33.1 years with a standard deviation of 7.5, range of 18-55 years, more females, in full time employment and with basic education. Of the fifty institutional managers, 42 (84%) were senior officers and had worked for more than five years. Education and type of food operator had strong statistically significant relationship with the implementation of HCCP policy and adherence with food preparation guidelines. The enforcement of HACCP policy and adherence with food safety guidelines was led by the Ghana Tourist Board, Public Health officers, and KMA, respectively. While a majority of food operators 373/450 (83.3%) did not know HACCP policy is part of food safety guidelines, staff of food safety law enforcement 44/50 (88%) confirmed knowing that food operators were not aware of the HACCP policy. The study documents evidence on the practice of food safety principles or HACCP policy or adherence to food preparation guidelines. Existing food safety guidelines incorporate varying principles of HACCP, however, awareness is low among food operators. The implication is that food production is likely to fall short of acceptable standards and not be wholesome putting consumers at health risk. Repeating this study in rural and urban areas in Ghana is necessary to provide much more evidence to inform food safety guidelines. Further studies on chemical analysis of food and implementing training modules on HACCP policy for food producers and law enforcement agencies may be helpful to improve existing situation.

Policy on Hazard Analysis and Critical Control Point (HACCP) and adherence to food preparation guidelines: a cross sectional survey of stakeholders in food service in Kumasi, Ghana

PubMed Central

2013-01-01

Background Food borne diseases claim more lives and are growing public health concerns. Simple preventive techniques such as adoption and adherence to hazard analysis and critical control point (HACCP) policy can significantly reduce this disease burden. Though food screening and inspection are done, the ultimate regulation, Hazard Analysis and Critical Control Point, which is known and accepted worldwide, appears not to be popular among food operators in Ghana. This paper examines the level of awareness of the existence of policy on hazard analysis and critical control point (HACCP) and its adherence to food preparation guidelines among food service providers in Ghana. Results The results revealed the mean age of food providers as 33.1 years with a standard deviation of 7.5, range of 18–55 years, more females, in full time employment and with basic education. Of the fifty institutional managers, 42 (84%) were senior officers and had worked for more than five years. Education and type of food operator had strong statistically significant relationship with the implementation of HCCP policy and adherence with food preparation guidelines. The enforcement of HACCP policy and adherence with food safety guidelines was led by the Ghana Tourist Board, Public Health officers, and KMA, respectively. While a majority of food operators 373/450 (83.3%) did not know HACCP policy is part of food safety guidelines, staff of food safety law enforcement 44/50 (88%) confirmed knowing that food operators were not aware of the HACCP policy. Conclusion The study documents evidence on the practice of food safety principles or HACCP policy or adherence to food preparation guidelines. Existing food safety guidelines incorporate varying principles of HACCP, however, awareness is low among food operators. The implication is that food production is likely to fall short of acceptable standards and not be wholesome putting consumers at health risk. Repeating this study in rural and urban areas in Ghana is necessary to provide much more evidence to inform food safety guidelines. Further studies on chemical analysis of food and implementing training modules on HACCP policy for food producers and law enforcement agencies may be helpful to improve existing situation. PMID:24180236

Updating fire safety standards. Final rule; affirmation.

PubMed

2011-11-16

This document affirms as final, without changes, a provision included in a final rule with request for comments that amended the Department of Veterans Affairs (VA) regulations concerning community residential care facilities, contract facilities for certain outpatient and residential services, and State home facilities. That provision established a five-year period within which all covered buildings with nursing home facilities existing as of June 25, 2001, must conform to the automatic sprinkler requirement of the 2009 edition of the National Fire Protection Association (NFPA) 101. This rule helps ensure the safety of veterans in the affected facilities.

Safety self-efficacy and safety performance: potential antecedents and the moderation effect of standardization.

PubMed

Katz-Navon, Tal; Naveh, Eitan; Stern, Zvi

2007-01-01

The purpose of this paper is to suggest a new safety self-efficacy construct and to explore its antecedents and interaction with standardization to influence in-patient safety. The paper used a survey of 161 nurses using a self-administered questionnaire over a 14-day period in two large Israeli general hospitals. Nurses answered questions relating to four safety self-efficacy antecedents: enactive mastery experiences; managers as safety role models; verbal persuasion; and safety priority, that relate to the perceived level of standardization and safety self-efficacy. Confirmatory factor analysis was used to assess the scale's construct validity. Regression models were used to test hypotheses regarding the antecedents and influence of safety self-efficacy. Results indicate that: managers as safety role models; distributing safety information; and priority given to safety, contributed to safety self-efficacy. Additionally, standardization moderated the effects of safety self-efficacy and patient safety such that safety self-efficacy was positively associated with patient safety when standardization was low rather than high. Hospital managers should be aware of individual motivations as safety self-efficacy when evaluating the potential influence of standardization on patient safety. Theoretically, the study introduces a new safety self-efficacy concept, and captures its antecedents and influence on safety performance. Also, the study suggests safety self-efficacy as a boundary condition for the influence of standardization on safety performance. Implementing standardization in healthcare is problematic because not all processes can be standardized. In this case, self-efficacy plays an important role in securing patient safety. Hence, safety self-efficacy may serve as a "substitute-for-standardization," by promoting staff behaviors that affect patient safety.

78 FR 7458 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-01

.... Petitioner: Sterling Mining Corporation, P.O. Box 217, North Lima, Ohio 44452. Mines: Shean Hill, MSHA I.D... outlets and valves. 6. Due to the thin coal seam and low mining height, the pipes placed along the roof... Granules (Ione) LLC, 1101 Opal Court, Suite 315, Hagerstown, Maryland 21740. Mine: Ione Mine, MSHA I.D. No...

How Can We Provide Safe Playgrounds? = Como podemos proveer lugares con juegos infantiles que no sean peligrosos para los ninos?

ERIC Educational Resources Information Center

ACCESS ERIC, Rockville, MD.

Outdoor playgrounds can be exciting places where children explore their environment and develop motor and social skills; however, they can also pose serious safety hazards. With the exception of California, no mandatory state or federal standards currently exist regarding manufacture or installation of playground equipment or surfaces. The…

78 FR 35976 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-14

.... (4) Training will be provided for operators to lower the grader blade to provide additional stopping... surface: (1) The operator will pump expanding cement slurry down the well to form a plug which runs from... operator will pump expanding cement slurry down the well to form a plug which runs from at least 200 feet...

77 FR 50166 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-20

... less than one shot per 10 feet to permit expanding cement to infiltrate the annulus between the casing... mineable coal seam will be perforated with one shot at the elevation of each coal seam above the lowest... detected. The record will be retained at the mine for one year. The petitioner asserts that the proposed...

78 FR 76775 - Special Conditions: Airbus, Model A350-900 Series Airplane; Lightning Protection of Fuel Tank...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-19

... level of safety equivalent to that established by the existing airworthiness standards. DATES: Send your... finding of regulatory adequacy under Sec. 611 of Public Law 92-574, the ``Noise Control Act of 1972.'' The... intended to control fuel tank flammability for all fuel tanks. This NGS is designed to provide a level of...

77 FR 59673 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... will examine valves and nozzles for damage malfunction and close the door fully before opening the air... failure pressure of 1,300 pounds per square inch, capped at the base, and actuated by an electrically controlled ball valve at the top. 6. Air nozzles must not exceed 30 pounds per square inch gauge. 7. The...

Microhydration of caesium compounds: Cs, CsOH, CsI and Cs₂I₂ complexes with one to three H₂O molecules of nuclear safety interest.

PubMed

Sudolská, Mária; Cantrel, Laurent; Cernušák, Ivan

2014-04-01

Structure and thermodynamic properties (standard enthalpies of formation and Gibbs free energies) of hydrated caesium species of nuclear safety interest, Cs, CsOH, CsI and its dimer Cs₂I₂, with one up to three water molecules, are calculated to assess their possible existence in severe accident occurring to a pressurized water reactor. The calculations were performed using the coupled cluster theory including single, double and non-iterative triple substitutions (CCSD(T)) in conjunction with the basis sets (ANO-RCC) developed for scalar relativistic calculations. The second-order spin-free Douglas-Kroll-Hess Hamiltonian was used to account for the scalar relativistic effects. Thermodynamic properties obtained by these correlated ab initio calculations (entropies and thermal capacities at constant pressure as a function of temperature) are used in nuclear accident simulations using ASTEC/SOPHAEROS software. Interaction energies, standard enthalpies and Gibbs free energies of successive water molecules addition determine the ordering of the complexes. CsOH forms the most hydrated stable complexes followed by CsI, Cs₂I₂, and Cs. CsOH still exists in steam atmosphere even at quite high temperature, up to around 1100 K.

An Investigation of Health and Safety Measures in a Hydroelectric Power Plant.

PubMed

Acakpovi, Amevi; Dzamikumah, Lucky

2016-12-01

Occupational risk management is known as a catalyst in generating superior returns for all stakeholders on a sustainable basis. A number of companies in Ghana implemented health and safety measures adopted from international companies to ensure the safety of their employees. However, there exist great threats to employees' safety in these companies. The purpose of this paper is to investigate the level of compliance of Occupational Health and Safety management systems and standards set by international and local legislation in power producing companies in Ghana. The methodology is conducted by administering questionnaires and in-depth interviews as measuring instruments. A random sampling technique was applied to 60 respondents; only 50 respondents returned their responses. The questionnaire was developed from a literature review and contained questions and items relevant to the initial research problem. A factor analysis was also carried out to investigate the influence of some variables on safety in general. Results showed that the significant factors that influence the safety of employees at the hydroelectric power plant stations are: lack of training and supervision, non-observance of safe work procedures, lack of management commitment, and lack of periodical check on machine operations. The study pointed out the safety loopholes and therefore helped improve the health and safety measures of employees in the selected company by providing effective recommendations. The implementation of the proposed recommendations in this paper, would lead to the prevention of work-related injuries and illnesses of employees as well as property damage and incidents in hydroelectric power plants. The recommendations may equally be considered as benchmark for the Safety and Health Management System with international standards.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Supanich, M.

The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetricmore » safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists.« less

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 5 2011-10-01 2011-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. A motor carrier must meet the safety fitness standard set forth...

Effect of the 2.0 mg/m3 coal mine dust standard on underground environmental dust levels.

PubMed

Parobeck

1975-08-01

The 1969 Federal Coal Mine Health and Safety Act established environmental dust standards for underground coal mines. The Act requires that the average concentration of respirable dust in the active workings of a mine be maintained at or below 3.0 mg/m3; and, that effective December 30, 1972, the 3.0 mg/m3 standard be reduced to 2.0 mg/m3. This paper discusses the current status of dust levels in our underground coal mines, the effect of the 2.0 mg/m3 standard on underground dust levels, and associates the current levels with specific operations and occupations. The comparison is made between current levels and those existing prior to December 30, 1972.

The role of food quality assurance and product certification systems on marketing aspects

NASA Astrophysics Data System (ADS)

Petrović, Z.; Milićević, D.; Nastasijević, I.; Đorđević, V.; Trbović, D.; Velebit, B.

2017-09-01

The level of quality that a product offers to consumers is a fundamental aspect of competition in many markets. Consumers’ confidence in the safety and quality of foods they buy and consume is a significant support to the economic development of production organizations of this type, and therefore the overall economic development. Consumer concerns about food safety as well as the globalization of food production have also led to the existence of a global internationally linked food production and distribution system. The necessity demanded by the consumer population to provide safe food with consistent quality at an attractive price imposes a choice of an appropriate quality assurance model in accordance with the specific properties of the product and the production processes. Modern trends, especially for the last ten years in quality assurance within specific production, such as the food industry, have marked the trend of hyperproduction and a number of production and safety standards, as well as a change of approach in the certification process of organizations according to one or more standards. This can be an additional source of costs for organizations, and can burden the food business operator`s budget in order to ensure their consistent application and maintenance. Quality assurance (QA) standards are considered to be a proven mechanism for delivering quality of product.

Recent Advances in Cigarette Ignition Propensity Research and Development

PubMed Central

O’Connor, Richard J.; Spalletta, Ron; Connolly, Gregory N.

2009-01-01

Major U.S. cigarette companies for decades conducted research and development regarding cigarette ignition propensity which has continued beyond fire safety standards for cigarettes that have recently been legislated. This paper describes recent scientific advances and technological development based on a comprehensive review of the physical, chemical, and engineering sciences, public health, and trade literature, U.S. and international patents, and research in the tobacco industry document libraries. Advancements since the first implementation of standards have made been in: a) understanding the key parameters involved in cigarette smoldering combustion and ignition of substrates; b) developing new cigarette and paper wrapper designs to reduce ignition propensity, including banded and non-banded cigarette paper approaches, c) assessing toxicology, and d) measuring performance. While the implications of manufacturers’ non-safety related aims are of concern, this research indicates possible alternative designs should experience with fire loss and existing technologies on the market suggest need for improvement. PMID:20495669

Advanced approach to information security management system model for industrial control system.

PubMed

Park, Sanghyun; Lee, Kyungho

2014-01-01

Organizations make use of important information in day-to-day business. Protecting sensitive information is imperative and must be managed. Companies in many parts of the world protect sensitive information using the international standard known as the information security management system (ISMS). ISO 27000 series is the international standard ISMS used to protect confidentiality, integrity, and availability of sensitive information. While an ISMS based on ISO 27000 series has no particular flaws for general information systems, it is unfit to manage sensitive information for industrial control systems (ICSs) because the first priority of industrial control is safety of the system. Therefore, a new information security management system based on confidentiality, integrity, and availability as well as safety is required for ICSs. This new ISMS must be mutually exclusive of an ICS. This paper provides a new paradigm of ISMS for ICSs, which will be shown to be more suitable than the existing ISMS.

Advanced Approach to Information Security Management System Model for Industrial Control System

PubMed Central

2014-01-01

Organizations make use of important information in day-to-day business. Protecting sensitive information is imperative and must be managed. Companies in many parts of the world protect sensitive information using the international standard known as the information security management system (ISMS). ISO 27000 series is the international standard ISMS used to protect confidentiality, integrity, and availability of sensitive information. While an ISMS based on ISO 27000 series has no particular flaws for general information systems, it is unfit to manage sensitive information for industrial control systems (ICSs) because the first priority of industrial control is safety of the system. Therefore, a new information security management system based on confidentiality, integrity, and availability as well as safety is required for ICSs. This new ISMS must be mutually exclusive of an ICS. This paper provides a new paradigm of ISMS for ICSs, which will be shown to be more suitable than the existing ISMS. PMID:25136659

77 FR 751 - Federal Motor Vehicle Safety Standards; Matters Incorporated by Reference

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-06

... incorrectly cites 49 U.S.C. 30177. This section does not exist. The correct citation is 49 U.S.C. 30117... revising the citation to read as follows: Authority: 49 U.S.C. 322, 30111, 30115, 30117, and 30166... of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any...

A study of NASA occupational injuries and property damage at Goddard Space Flight Center, Langley Research Center and Headquarters

NASA Technical Reports Server (NTRS)

1976-01-01

Analysis of NASA's accident/injury/illness and health data was performed. The analysis included: (1) an on-site study of the existing data; (2) evaluation of the findings to develop criteria for the subsequent implementation of safety and health standards; (3) preparation of a graphical loss control assessment; and (4) recommendations to reduce accident rates.

Report on SARS backfit evaluation, Catalytic, Inc. Solvent Refined Coal Pilot Plant, Wilsonville, Alabama

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, A.F. Jr.

1980-07-02

A site visit was made in company with the DOE-OPTA-EA Safety and Health Official for the purpose of providing that official with technical assistance in evaluating the validity of an earlier DOE-OPTA recommendation exempting this facility from the Safety and Analysis and Review backfit requirements of DOE Order 5481.1. A further purpose of the visit was to assess and evaluate the occupational safety and health program at this facility, as compared with the criteria and guidelines contained in ASFE Order 5481.1. Adequate documentation regarding compliance with codes, standards, and regulations were observed at this facility. There is in existence anmore » ongoing continuous safety analysis effort for both modifications or additions to this facility. Adequate environmental safeguards and plans and procedures were observed. The SARS backfit exemption is appropriate. The occupational safety and health program is in many ways a model for the scope of work and nature of hazards involved, and is consistent with ASFE guidelines and statutory requirements.« less

Identification of Behavior Based Safety by Using Traffic Light Analysis to Reduce Accidents

NASA Astrophysics Data System (ADS)

Mansur, A.; Nasution, M. I.

2016-01-01

This work present the safety assessment of a case study and describes an important area within the field production in oil and gas industry, namely behavior based safety (BBS). The company set a rigorous BBS and its intervention program that implemented and deployed continually. In this case, observers requested to have discussion and spread a number of determined questions related with work behavior to the workers during observation. Appraisal of Traffic Light Analysis (TLA) as one tools of risk assessment used to determine the estimated score of BBS questionnaire. Standardization of TLA appraisal in this study are based on Regulation of Minister of Labor and Occupational Safety and Health No:PER.05/MEN/1996. The result shown that there are some points under 84%, which categorized in yellow category and should corrected immediately by company to prevent existing bad behavior of workers. The application of BBS expected to increase the safety performance at work time-by-time and effective in reducing accidents.

Research on the management and endorsement of nuclear safety standards in the United States and its revelation for China

NASA Astrophysics Data System (ADS)

Liu, Ting; Tian, Yu; Yang, Lili; Gao, Siyi; Song, Dahu

2018-01-01

This paper introduces the American standard system, the Nuclear Regulatory Commission (NRC)’s responsibility, NRC nuclear safety regulations and standards system, studies on NRC’s standards management and endorsement mode, analyzes the characteristics of NRC standards endorsement management, and points out its disadvantages. This paper draws revelation from the standard management and endorsement model of NRC and points suggestion to China’s nuclear and radiation safety standards management.The issue of the “Nuclear Safety Law”plays an important role in China’s nuclear and radiation safety supervision. Nuclear and radiation safety regulations and standards are strong grips on the implementation of “Nuclear Safety Law”. This paper refers on the experience of international advanced countriy, will effectively promote the improvement of the endorsed management of China’s nuclear and radiation safety standards.

Food safety regulations in Australia and New Zealand Food Standards.

PubMed

Ghosh, Dilip

2014-08-01

Citizens of Australia and New Zealand recognise that food security is a major global issue. Food security also affects Australia and New Zealand's status as premier food exporting nations and the health and wellbeing of the Australasian population. Australia is uniquely positioned to help build a resilient food value chain and support programs aimed at addressing existing and emerging food security challenges. The Australian food governance system is fragmented and less transparent, being largely in the hands of government and semi-governmental regulatory authorities. The high level of consumer trust in Australian food governance suggests that this may be habitual and taken for granted, arising from a lack of negative experiences of food safety. In New Zealand the Ministry of Primary Industries regulates food safety issues. To improve trade and food safety, New Zealand and Australia work together through Food Standards Australia New Zealand (FSANZ) and other co-operative agreements. Although the potential risks to the food supply are dynamic and constantly changing, the demand, requirement and supply for providing safe food remains firm. The Australasian food industry will need to continually develop its system that supports the food safety program with the help of scientific investigations that underpin the assurance of what is and is not safe. The incorporation of a comprehensive and validated food safety program is one of the total quality management systems that will ensure that all areas of potential problems are being addressed by industry. © 2014 Society of Chemical Industry.

Independent data monitoring committees: Preparing a path for the future

PubMed Central

Hess, Connie N.; Roe, Matthew T.; Gibson, C. Michael; Temple, Robert J.; Pencina, Michael J.; Zarin, Deborah A.; Anstrom, Kevin J.; Alexander, John H.; Sherman, Rachel E.; Fiedorek, Fred T.; Mahaffey, Kenneth W.; Lee, Kerry L.; Chow, Shein-Chung; Armstrong, Paul W.; Califf, Robert M.

2014-01-01

Independent data monitoring committees (IDMCs) were introduced to monitor patient safety and study conduct in randomized clinical trials (RCTs), but certain challenges regarding the utilization of IDMCs have developed. First, the roles and responsibilities of IDMCs are expanding, perhaps due to increasing trial complexity and heterogeneity regarding medical, ethical, legal, regulatory, and financial issues. Second, no standard for IDMC operating procedures exists, and there is uncertainty about who should determine standards and whether standards should vary with trial size and design. Third, considerable variability in communication pathways exist across IDMC interfaces with regulatory agencies, academic coordinating centers, and sponsors. Finally, there has been a substantial increase in the number of RCTs using IDMCs, yet there is no set of qualifications to help guide the training and development of the next generation of IDMC members. Recently, an expert panel of representatives from government, industry, and academia assembled at the Duke Clinical Research Institute to address these challenges and to develop recommendations for the future utilization of IDMCs in RCTs. PMID:25066551

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

16 CFR 1205.1 - Scope of the standard.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... subpart A of part 1205 is a consumer product safety standard which prescribes safety requirements for... the standard are subject to the requirements of this standard if they are “consumer products”. “Walk...

Review article: practical current issues in perioperative patient safety.

PubMed

Eichhorn, John H

2013-02-01

This brief review provides an overview and, importantly, a context perspective of relevant current practical issues in perioperative patient safety. The dramatic improvement in anesthesia patient safety over the last 30 years was not initiated by electronic monitors but, rather, largely by a set of behaviours known as "safety monitoring" that were then made decidedly more effective by extending the human senses through electronic monitoring, for example, capnography and pulse oximetry. In the highly developed world, this current success is threatened by complacency and production pressure. In some areas of the developing/underdeveloped world, the challenge is implementing the components of anesthesia practice that will bring safety improvements to parallel the overall current success, for instance, applying the World Federation of Societies of Anaesthesiologists (WFSA) "International Standards for A Safe Practice of Anaesthesia". Generally, expanding the current success in safety involves many practical issues. System issues involve research, effective reporting mechanisms and analysis/broadcasting of results, perioperative communication (including "speaking up to power"), and checklists. Monitoring issues involve enforcing existing published monitoring standards and also recognizing the risk of danger to the patient from hypoventilation during procedural sedation and from postoperative intravenous pain medications. Issues of clinical care include medication errors in the operating room, cerebral hypoperfusion (especially in the head-up position), dangers of airway management, postoperative residual weakness from muscle relaxants, operating room fires, and risks specific in obstetric anesthesia. Recognition of the issues outlined here and empowerment of all anesthesia professionals, from the most senior professors and administrators to the newest practitioners, should help maintain, solidify, and expand the improvements in anesthesia and perioperative patient safety.

45 CFR 156.1110 - Establishment of patient safety standards for QHP issuers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... STANDARDS RELATED TO EXCHANGES Quality Standards § 156.1110 Establishment of patient safety standards for QHP issuers. (a) Patient safety standards. A QHP issuer that contracts with a hospital with greater... 45 Public Welfare 1 2014-10-01 2014-10-01 false Establishment of patient safety standards for QHP...

Software Safety Risk in Legacy Safety-Critical Computer Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.; Baggs, Rhoda

2007-01-01

Safety Standards contain technical and process-oriented safety requirements. Technical requirements are those such as "must work" and "must not work" functions in the system. Process-Oriented requirements are software engineering and safety management process requirements. Address the system perspective and some cover just software in the system > NASA-STD-8719.13B Software Safety Standard is the current standard of interest. NASA programs/projects will have their own set of safety requirements derived from the standard. Safety Cases: a) Documented demonstration that a system complies with the specified safety requirements. b) Evidence is gathered on the integrity of the system and put forward as an argued case. [Gardener (ed.)] c) Problems occur when trying to meet safety standards, and thus make retrospective safety cases, in legacy safety-critical computer systems.

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

29 CFR 1925.2 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Safety and health standards. 1925.2 Section 1925.2 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH STANDARDS FOR FEDERAL SERVICE CONTRACTS § 1925.2 Safety and health standards...

10 CFR 851.23 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Safety and health standards. 851.23 Section 851.23 Energy DEPARTMENT OF ENERGY WORKER SAFETY AND HEALTH PROGRAM Specific Program Requirements § 851.23 Safety and health standards. (a) Contractors must comply with the following safety and health standards that are...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... standards, except the 1966 fire safety standards. (ii) This vessel complies with international safety standards developed prior to 1960. There is (or, is not) an automatic sprinkler system fitted in the... international safety standard. There is (or, is not) an automatic sprinkler system fitted in the passenger...

Perceptions of alcohol-impaired driving and the blood alcohol concentration standard in the United States.

PubMed

Eby, David W; Molnar, Lisa J; Kostyniuk, Lidia P; St Louis, Renée M; Zanier, Nicole; Lepkowski, James M; Bergen, Gwen

2017-12-01

Although the number of alcohol-impaired driving (AID) fatalities has declined over the past several years, AID continues to be a serious public health problem. The purpose of this effort was to gain a better understanding of the U.S. driving population's perceptions and thoughts about the impacts of lowering the blood alcohol concentration (BAC) driving standard below.08% on AID, health, and other outcomes. A questionnaire was administered to a nationally representative sample of licensed drivers in the U.S. (n=1011) who were of age 21 or older on driving habits, alcohol consumption habits, drinking and driving habits, attitudes about drinking and driving, experiences with and opinions of drinking and driving laws, opinions about strategies to reduce drinking and driving, general concerns about traffic safety issues, and demographics. One-third of participants supported lowering the legal BAC standard, and participants rated a BAC standard of .05% to be moderately acceptable on average. 63.9% indicated that lowering 30 the BAC to .05% would have no effect on their decisions to drink and drive. Nearly 60% of respondents lacked accurate knowledge of their state's BAC standard. Public support for lowering the BAC standard was moderate and was partially tied to beliefs about the impacts of a change in the BAC standard. The results suggest that an opportunity for better educating the driving population about existing AID policy and the implications for lowering the BAC level on traffic injury prevention. The study results are useful for state traffic safety professionals and policy makers to have a better understanding of the public's perceptions of and thoughts about BAC standards. There is a clear need for more research into the effects of lowering the BAC standard on crashes, arrests, AID behavior, and alcohol-related behaviors. Copyright © 2017 National Safety Council and Elsevier Ltd. All rights reserved.

Guidelines by the AAPM and GEC-ESTRO on the use of innovative brachytherapy devices and applications: Report of Task Group 167

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nath, Ravinder; Rivard, Mark J., E-mail: mark.j.rivard@gmail.com; DeWerd, Larry A.

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used in the evaluation of innovative devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining the equivalence of the innovative treatment modality to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of innovative radiotherapy devices or applications is a critical part in which physicists should be actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative brachytherapy devices and applications andmore » includes evaluation of (1) dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, (2) risks and benefits from a regulatory and safety perspective, and (3) resource assessment and preparedness. Further, it is suggested that any developed calibration methods be traceable to a primary standards dosimetry laboratory (PSDL) such as the National Institute of Standards and Technology in the U.S. or to other PSDLs located elsewhere such as in Europe. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the Accredited Dosimetry Calibration Laboratories in the U.S. is encouraged before a source is introduced into widespread routine clinical use. The American Association of Physicists in Medicine and the Groupe Européen de Curiethérapie-European Society for Radiotherapy and Oncology (GEC-ESTRO) have developed guidelines for the safe and consistent application of brachytherapy using innovative devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of requirements of the U.S. Nuclear Regulatory Commission, U.S. Department of Transportation, International Electrotechnical Commission Medical Electrical Equipment Standard 60601, U.S. Food and Drug Administration, European Commission for CE Marking (Conformité Européenne), and institutional review boards and radiation safety committees.« less

Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety

Science.gov Websites

Codes, Standards, and Safety to someone by E-mail Share Alternative Fuels Data Center: Biodiesel Codes, Standards, and Safety on Facebook Tweet about Alternative Fuels Data Center: Biodiesel Codes , Standards, and Safety on Twitter Bookmark Alternative Fuels Data Center: Biodiesel Codes, Standards, and

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true General safety and health... Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health standards. (a) Every...

77 FR 76005 - Submission for OMB Review; Comment Request-Safety Standard for Walk-Behind Power Lawn Mowers

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

... Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety Commission... with the Commission's safety standard for walk- behind power lawn mowers. DATES: Written comments on... of approval of the collection of information required in the Safety Standard for Walk-Behind Power...

TU-G-213-00: The International Electrotechnical Commission (IEC): What Is It and Why Should Medical Physicists Care?

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetricmore » safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists.« less

TU-G-213-01: IEC and US Committee Activities and Organizational Structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ibbott, G.

2015-06-15

The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetricmore » safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists.« less

TU-G-213-03: IEC Subcommittee 62C (Equipment for Radiotherapy, Nuclear Medicine and Radiation Dosimetry): Recent and Active Projects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Culberson, W.

The International Electrotechnical Commission (IEC) writes standards that manufacturers of electrical equipment must comply with. Medical electrical equipment, such as medical imaging, radiation therapy, and radiation dosimetry devices, fall under Technical Committee 62. Of particular interest to medical physicists are the standards developed within Subcommittees (SC) 62B, which addresses diagnostic radiological imaging equipment, and 62C, which addresses equipment for radiation therapy, nuclear medicine and dosimetry. For example, a Working Group of SC 62B is responsible for safety and quality assurance standards for CT scanners and a Working Group of SC 62C is responsible for standards that set requirements for dosimetricmore » safety and accuracy of linacs and proton accelerators. IEC standards thus have an impact on every aspect of a medical physicist’s job, including equipment testing, shielding design, room layout, and workflow. Consequently, it is imperative that US medical physicists know about existing standards, as well as have input on those under development or undergoing revision. The structure of the IEC and current standards development work will be described in detail. The presentation will explain how US medical physicists can learn about IEC standards and contribute to their development. Learning Objectives: Learn about the structure of the IEC and the influence that IEC standards have on the design of equipment for radiology and radiation therapy. Learn about the mechanisms by which the US participates in the development and revision of standards. Understand the specific requirements of several standards having direct relevance to diagnostic and radiation therapy physicists.« less

78 FR 37706 - Safety Standards for Infant Walkers and Infant Swings

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-24

... Danny Keysar Child Product Safety Notification Act, if ASTM revises the underlying voluntary standard... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1216 and 1223 Safety Standards for Infant Walkers... the Danny Keysar Child Product Safety Notification Act, the U.S. Consumer Product Safety Commission...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 5 2012-10-01 2012-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 5 2013-10-01 2013-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

49 CFR 385.5 - Safety fitness standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 5 2014-10-01 2014-10-01 false Safety fitness standard. 385.5 Section 385.5... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS SAFETY FITNESS PROCEDURES General § 385.5 Safety fitness standard. The satisfactory safety rating is based on the degree of...

76 FR 43743 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...

Human Factors Engineering Guidelines for Overhead Cranes

NASA Technical Reports Server (NTRS)

Chandler, Faith; Delgado, H. (Technical Monitor)

2001-01-01

This guideline provides standards for overhead crane cabs that can be applied to the design and modification of crane cabs to reduce the potential for human error due to design. This guideline serves as an aid during the development of a specification for purchases of cranes or for an engineering support request for crane design modification. It aids human factors engineers in evaluating existing cranes during accident investigations or safety reviews.

76 FR 10246 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-24

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... regulations and update the standards for VA approval of such facilities, including standards for fire safety... to ``RIN 2900-AN57--Updating Fire Safety [[Page 10247

Developing Methodologies for Evaluating the Earthquake Safety of Existing Buildings.

ERIC Educational Resources Information Center

Bresler, B.; And Others

This report contains four papers written during an investigation of methods for evaluating the safety of existing school buildings under Research Applied to National Needs (RANN) grants. In "Evaluation of Earthquake Safety of Existing Buildings," by B. Bresler, preliminary ideas on the evaluation of the earthquake safety of existing…

[Study on the reorganization of standards related to food contact ceramics and porcelains].

PubMed

Zhang, Jianbo; Zhu, Lei; Zhang, Hong; Liu, Shan; Wang, Zhutian

2014-07-01

To solve the problem of overlap, iterance and conflict among current standards related to food contact ceramics and porcelains. To collect all the current standards related to food contact ceramics and porcelains and reorganize them following the settled principles and method and list the standards that need to be revoked, revised, incorporated, or keep valid and excluded from the food safety standard system. 19 standards were collected in this study and reorganized. The main food safety indexes in these standards were the limits for lead and cadmium that released from food contact ceramics and porcelains. There were released limits for lead and cadmium in 10 standards, including 4 horizontal standards and 6 commodity standards. The provisions in these 10 standards were in conflict. And as a result of this, the 4 horizontal standards were suggested to be incorporated and revised to one food safety standard, while the 6 commodity standards were suggested to be revised and exclude the lead and cadmium provisions. Another 7 commodity standards only referenced provisions for lead and cadmium limits from horizontal standards, and these 7 standards were suggested to be excluded from food safety standard system. There were no food safety indexes in 2 standards of the 19 standards, these standards were considered not related to food safety and no need to be reorganized. There were conflicts about the released limits of lead and cadmium among the current standards related to food contact ceramics and porcelains. So, it is necessary to a set up a new food safety standard for released lead and cadmium permissible limits which can apply to all food contact ceramics and porcelains. This food safety standard should be based on food safety risk assessment and the actual situations of manufacture and usage of food contact ceramics and porcelains. The provisions in international standards and relative standards from other countries can also provide references to this standard.

Criticality safety evaluation for the Advanced Test Reactor enhanced low enriched uranium fuel elements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Montierth, Leland M.

2016-07-19

The Global Threat Reduction Initiative (GTRI) convert program is developing a high uranium density fuel based on a low enriched uranium (LEU) uranium-molybdenum alloy. Testing of prototypic GTRI fuel elements is necessary to demonstrate integrated fuel performance behavior and scale-up of fabrication techniques. GTRI Enhanced LEU Fuel (ELF) elements based on the ATR-Standard Size elements (all plates fueled) are to be fabricated for testing in the Advanced Test Reactor (ATR). While a specific ELF element design will eventually be provided for detailed analyses and in-core testing, this criticality safety evaluation (CSE) is intended to evaluate a hypothetical ELF element designmore » for criticality safety purposes. Existing criticality analyses have analyzed Standard (HEU) ATR elements from which controls have been derived. This CSE documents analysis that determines the reactivity of the hypothetical ELF fuel elements relative to HEU ATR elements and whether the existing HEU ATR element controls bound the ELF element. The initial calculations presented in this CSE analyzed the original ELF design, now referred to as Mod 0.1. In addition, as part of a fuel meat thickness optimization effort for reactor performance, other designs have been evaluated. As of early 2014 the most current conceptual designs are Mk1A and Mk1B, that were previously referred to as conceptual designs Mod 0.10 and Mod 0.11, respectively. Revision 1 evaluates the reactivity of the ATR HEU Mark IV elements for a comparison with the Mark VII elements.« less

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

30 CFR 6.20 - MSHA acceptance of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA acceptance of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.20 MSHA acceptance of equivalent non-MSHA product safety standards. (a) MSHA will accept non-MSHA product safety standards, or groups of standards, as equivalent...

76 FR 57635 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Standards Service Aviation Safety Inspectors; Correction AGENCY: Federal Aviation Administration (FAA), DOT... ``Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors'' (76 FR 52231... of, a Flight Standards Service Aviation Safety Inspector, and had direct responsibility to inspect...

Patient safety and health policy: a history and review.

PubMed

Small, Stephen D; Barach, Paul

2002-12-01

Policy initiatives on many fronts have converged to improve patient safety. A major tension that characterizes this process is the attempt to achieve a balance between learning and control in complex systems with technical, social, and organizational components. Efforts to improve learning are marked by better information flow, discovery, flexibility in thinking, embracing of failures as learning opportunities, and core incentives to promote voluntary participation of all stakeholders in the process. Efforts to improve accountability are traditionally marked by public disclosure, meeting of certain widely disseminated standards, availability of performance measures, exposure to legal liability, and compliance with mandated directives (statutes, regulations, accreditation requirements). In some sense, these directions are mutually exclusive. Although a more collaborative regulatory-improvement model would be helpful in creating an industrywide safety culture, it is likely that learning and accountability functions will follow separate tracks. An exception would be policy that stimulates organizations to comply with regulation by showing how well and by what methods they are learning and how others can profit from these experiences. Any approach to improving patient safety should, at a minimum, include a nonpunitive in-depth mechanism for reporting incidents, postincident evaluations for identification of system changes to prevent subsequent occurrences, and state-guaranteed legislative protection from discovery for all aspects of information gathered to improve patient safety. Nonpunitive approaches have yielded useful results in other industries [43]. State and federal courts, state licensing boards, and accrediting bodies such as JCAHO all function to maintain accountability and standards; however, the very fear of existing legal liability or its misapplication are the greatest hurdles to pioneering patient-safety efforts. The health care system needs to transform the existing culture of blame and punishment that suppresses information about errors and adverse events into a culture of safety that focuses on openness and information sharing to improve health care and prevent adverse outcomes. Education and leadership will be most important to creating and sustaining a strong safety culture and arguably the most important defense against preventable harms. Safety culture cannot be legislated, just as the old adage states that it is easier to pull rather than push a piece of spaghetti. Given the imbalances and inefficiencies of market forces in health care, perverse incentives that have strengthened resistance to change, and secrecy when it comes to adverse event information, however, it is likely that policy initiatives will continue to play an important role in the transformation of the industry to more highly reliable, safer levels of care.

24 CFR 51.203 - Safety standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

41 CFR 50-204.2 - General safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... health standards. 50-204.2 Section 50-204.2 Public Contracts and Property Management Other Provisions Relating to Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 204-SAFETY AND HEALTH STANDARDS FOR FEDERAL SUPPLY CONTRACTS General Safety and Health Standards § 50-204.2 General safety and health...

75 FR 17641 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-07

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Parts 17 and 59 RIN 2900-AN57 Updating Fire Safety Standards... for VA approval of such facilities, including standards for fire safety and heating and cooling... submitted in response to ``RIN 2900-AN57--Updating Fire Safety Standards.'' Copies of comments received will...

24 CFR 51.203 - Safety standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Safety standards. 51.203 Section 51... Conventional Fuels or Chemicals of an Explosive or Flammable Nature § 51.203 Safety standards. The following... from a hazard: (a) Thermal Radiation Safety Standard. Projects shall be located so that: (1) The...

76 FR 8699 - Locomotive Safety Standards; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

.... FRA-2009-0094 and FRA-2009-0095, Notice No. 2] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards notice of proposed... locomotive safety standards. See 76 FR 2200. The NPRM established a public docket to receive comments in...

77 FR 23159 - Locomotive Safety Standards; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-18

.... FRA-2009-0094 and FR-2009-0095, Notice No. 4] RIN 2130-AC16 Locomotive Safety Standards; Correction... notifying the public that the correct docket number for the Locomotive Safety Standards final rule is FRA... rule related to locomotive safety standards. See 77 FR 21312. The final rule established a public...

46 CFR 80.25 - Notification of safety standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Notification of safety standards. 80.25 Section 80.25 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS DISCLOSURE OF SAFETY STANDARDS AND COUNTRY OF REGISTRY § 80.25 Notification of safety standards. (a) Each owner, operator, agent...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2010 CFR

2010-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2011 CFR

2011-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2012 CFR

2012-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2014 CFR

2014-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2013 CFR

2013-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

78 FR 9623 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-11

... [Docket No. NHTSA-2013-0011] RIN 2127-AL11 Federal Motor Vehicle Safety Standards; Air Brake Systems... rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... published a final rule in the Federal Register amending Federal Motor Vehicle Safety Standard (FMVSS) No...

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false National Standard 10-Safety of Life at Sea... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

Patient safety issues in office-based surgery and anaesthesia in Switzerland: a qualitative study.

PubMed

McLennan, Stuart; Schwappach, David; Harder, Yves; Staender, Sven; Elger, Bernice

2017-08-01

To identify the spectrum of patient safety issues in office-based surgery and anaesthesia in Switzerland. Purposive sample of 23 experts in surgery and anaesthesia and quality and regulation in Switzerland. Data were collected via individual qualitative interviews using a researcher-developed semi-structured interview guide between March 2016 and September 2016. Interviews were transcribed and analysed using conventional content analysis. Issues were categorised under the headings "structure", "process", and "outcome". Experts identified two key overarching patient safety and regulatory issues in relation to office-based surgery and anaesthesia in Switzerland. First, experts repeatedly raised the current lack of data and transparency of the setting. It is unknown how many surgeons are operating in offices, how many and what types of operations are being done, and what the outcomes are. Secondly, experts also noted the limited oversight and regulation of the setting. While some standards exists, most experts felt that more minimal safety standards are needed regarding the requirements that must be met to do office-based surgery and what can and cannot be done in the office-based setting are needed, but they advocated a self-regulatory approach. There is a lack of empirical data regarding the quantity and quality office-based surgery and anaesthesia in Switzerland. Further research is needed to address these research gaps and inform health policy in relation to patient safety in office-based surgery and anaesthesia in Switzerland. Copyright © 2017. Published by Elsevier GmbH.

Implementing standardized, inter-unit communication in an international setting: handoff of patients from emergency medicine to internal medicine.

PubMed

Balhara, Kamna S; Peterson, Susan M; Elabd, Mohamed Moheb; Regan, Linda; Anton, Xavier; Al-Natour, Basil Ali; Hsieh, Yu-Hsiang; Scheulen, James; Stewart de Ramirez, Sarah A

2018-04-01

Standardized handoffs may reduce communication errors, but research on handoff in community and international settings is lacking. Our study at a community hospital in the United Arab Emirates characterizes existing handoff practices for admitted patients from emergency medicine (EM) to internal medicine (IM), develops a standardized handoff tool, and assesses its impact on communication and physician perceptions. EM physicians completed a survey regarding handoff practices and expectations. Trained observers utilized a checklist based on the Systems Engineering Initiative for Patient Safety model to observe 40 handoffs. EM and IM physicians collaboratively developed a written tool encouraging bedside handoff of admitted patients. After the intervention, surveys of EM physicians and 40 observations were subsequently repeated. 77.5% of initial observed handoffs occurred face-to-face, with 42.5% at bedside, and in four different languages. Most survey respondents considered face-to-face handoff ideal. Respondents noted 9-13 patients suffering harm due to handoff in the prior month. After handoff tool implementation, 97.5% of observed handoffs occurred face-to-face (versus 77.5%, p = 0.014), with 82.5% at bedside (versus 42.5%, p < 0.001), and all in English. Handoff was streamlined from 7 possible pathways to 3. Most post-intervention survey respondents reported improved workflow (77.8%) and safety (83.3%); none reported patient harm. Respondents and observers noted reduced inefficiency (p < 0.05). Our standardized tool increased face-to-face and bedside handoff, positively impacted workflow, and increased perceptions of safety by EM physicians in an international, non-academic setting. Our three-step approach can be applied towards developing standardized, context-specific inter-specialty handoff in a variety of settings.

Safety of plant-made pharmaceuticals: product development and regulatory considerations based on case studies of two autologous human cancer vaccines.

PubMed

Tusé, Daniel

2011-03-01

Guidelines issued by regulatory agencies for the development of plant-made pharmaceutical (PMP) products provide criteria for product manufacturing and characterization, safety determination, containment and mitigation of environmental risks. Features of plant-made products do not always enable an easy fit within the criteria subscribed to by regulators. The unconventional nature of plant-based manufacturing processes and peculiarities of plant biology relative to that of traditional biological production systems have led to special considerations in the regulatory scrutiny of PMP. Presented in this review are case studies of two plant-made autologous (patient-specific) cancer vaccines, the nature of which introduced challenges to conventional and standardized development and preclinical evaluation routes. The rationale presented to FDA by the sponsors of each vaccine to build consensus and obtain variances to existing guidelines is discussed. While development of many plant-made biologics can be accomplished within the existing regulatory framework, the development of specialized products can be defended with rational arguments based on strong science.

NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for

Science.gov Websites

Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities NREL Provides First-of-its-Kind Guidance Promoting Safety Standards for Natural Gas Vehicle Maintenance Facilities December 1, 2017 The U.S vehicle maintenance facilities with a new handbook and webinar that outline safety factors and standards

Natural Gas Vehicle Cylinder Safety, Training and Inspection Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hank Seiff

2008-12-31

Under the auspices of the National Energy Technology Laboratory and the US Department of Energy, the Clean Vehicle Education Foundation conducted a three-year program to increase the understanding of the safe and proper use and maintenance of vehicular compressed natural gas (CNG) fuel systems. High-pressure fuel systems require periodic inspection and maintenance to insure safe and proper operation. The project addressed the needs of CNG fuel containers (cylinders) and associated high-pressure fuel system components related to existing law, codes and standards (C&S), available training and inspection programs, and assured coordination among vehicle users, public safety officials, fueling station operators andmore » training providers. The program included a public and industry awareness campaign, establishment and administration of a cylinder inspector certification training scholarship program, evaluation of current safety training and testing practices, monitoring and investigation of CNG vehicle incidents, evaluation of a cylinder recertification program and the migration of CNG vehicle safety knowledge to the nascent hydrogen vehicle community.« less

Prevalence and determinants of non-standard motorcycle safety helmets amongst food delivery workers in Selangor and Kuala Lumpur.

PubMed

Kulanthayan, S; See, Lai Git; Kaviyarasu, Y; Nor Afiah, M Z

2012-05-01

Almost half of the global traffic crashes involve vulnerable groups such as pedestrian, cyclists and two-wheeler users. The main objective of this study was to determine the factors that influence standard of the safety helmets used amongst food delivery workers by presence of Standard and Industrial Research Institute of Malaysia (SIRIM) certification label. A cross sectional study was conducted amongst 150 food delivery workers from fast food outlets in the vicinity of Selangor and Kuala Lumpur. During observation, safety helmets were classified as standard safety helmet in the presence of SIRIM label and non-standard in the absence of the label. They were approached for questionnaire participation once consent was obtained and were requested to exchange their safety helmet voluntarily with a new one after the interview. Data analysis was carried out using SPSS. Chi square and logistic regression analysis was applied to determine the significance and odds ratio of the variables studied, respectively (penetration test, age, education level, knowledge, crash history, types of safety helmet, marital status and years of riding experience) against the presence of SIRIM label. The response rate for this study was 85.2%. The prevalence of non-standard helmets use amongst fast food delivery workers was 55.3%. Safety helmets that failed the penetration test had higher odds of being non-standard helmets compared with safety helmets passing the test. Types of safety helmet indicated half-shell safety helmets had higher odds to be non-standard safety helmets compared to full-shell safety helmets. Riders with more years of riding experience were in high odds of wearing non-standard safety helmets compared to riders with less riding experience. Non-standard (non-SIRIM approved) helmets were more likely to be half-shell helmets, were more likely to fail the standards penetration test, and were more likely to be worn by older, more experienced riders. The implications of these findings are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

Protecting Labor Rights: Roles for Public Health

PubMed Central

Gaydos, Megan; Yu, Karen; Weintraub, June

2013-01-01

Federal, state, and local labor laws establish minimum standards for working conditions, including wages, work hours, occupational safety, and collective bargaining. The adoption and enforcement of labor laws protect and promote social, economic, and physical determinants of health, while incomplete compliance undermines these laws and contributes to health inequalities. Using existing legal authorities, some public health agencies may be able to contribute to the adoption, monitoring, and enforcement of labor laws. We describe how routine public health functions have been adapted in San Francisco, California, to support compliance with minimum wage and workers' compensation insurance standards. Based on these experiences, we consider the opportunities and obstacles for health agencies to defend and advance labor standards. Increasing coordinated action between health and labor agencies may be a promising approach to reducing health inequities and efficiently enforcing labor standards. PMID:24179278

Protecting labor rights: roles for public health.

PubMed

Bhatia, Rajiv; Gaydos, Megan; Yu, Karen; Weintraub, June

2013-11-01

Federal, state, and local labor laws establish minimum standards for working conditions, including wages, work hours, occupational safety, and collective bargaining. The adoption and enforcement of labor laws protect and promote social, economic, and physical determinants of health, while incomplete compliance undermines these laws and contributes to health inequalities. Using existing legal authorities, some public health agencies may be able to contribute to the adoption, monitoring, and enforcement of labor laws. We describe how routine public health functions have been adapted in San Francisco, California, to support compliance with minimum wage and workers' compensation insurance standards. Based on these experiences, we consider the opportunities and obstacles for health agencies to defend and advance labor standards. Increasing coordinated action between health and labor agencies may be a promising approach to reducing health inequities and efficiently enforcing labor standards.

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

29 CFR 1910.5 - Applicability of standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General § 1910.5 Applicability of standards. (a) Except as provided in... enforce standards or regulations affecting occupational safety or health. (c)(1) If a particular standard...

Modeling the Relationship between Safety Climate and Safety Performance in a Developing Construction Industry: A Cross-Cultural Validation Study

PubMed Central

Zahoor, Hafiz; Chan, Albert P. C.; Utama, Wahyudi P.; Gao, Ran; Zafar, Irfan

2017-01-01

This study attempts to validate a safety performance (SP) measurement model in the cross-cultural setting of a developing country. In addition, it highlights the variations in investigating the relationship between safety climate (SC) factors and SP indicators. The data were collected from forty under-construction multi-storey building projects in Pakistan. Based on the results of exploratory factor analysis, a SP measurement model was hypothesized. It was tested and validated by conducting confirmatory factor analysis on calibration and validation sub-samples respectively. The study confirmed the significant positive impact of SC on safety compliance and safety participation, and negative impact on number of self-reported accidents/injuries. However, number of near-misses could not be retained in the final SP model because it attained a lower standardized path coefficient value. Moreover, instead of safety participation, safety compliance established a stronger impact on SP. The study uncovered safety enforcement and promotion as a novel SC factor, whereas safety rules and work practices was identified as the most neglected factor. The study contributed to the body of knowledge by unveiling the deviations in existing dimensions of SC and SP. The refined model is expected to concisely measure the SP in the Pakistani construction industry, however, caution must be exercised while generalizing the study results to other developing countries. PMID:28350366

Modeling the Relationship between Safety Climate and Safety Performance in a Developing Construction Industry: A Cross-Cultural Validation Study.

PubMed

Zahoor, Hafiz; Chan, Albert P C; Utama, Wahyudi P; Gao, Ran; Zafar, Irfan

2017-03-28

This study attempts to validate a safety performance (SP) measurement model in the cross-cultural setting of a developing country. In addition, it highlights the variations in investigating the relationship between safety climate (SC) factors and SP indicators. The data were collected from forty under-construction multi-storey building projects in Pakistan. Based on the results of exploratory factor analysis, a SP measurement model was hypothesized. It was tested and validated by conducting confirmatory factor analysis on calibration and validation sub-samples respectively. The study confirmed the significant positive impact of SC on safety compliance and safety participation , and negative impact on number of self-reported accidents/injuries . However, number of near-misses could not be retained in the final SP model because it attained a lower standardized path coefficient value. Moreover, instead of safety participation , safety compliance established a stronger impact on SP. The study uncovered safety enforcement and promotion as a novel SC factor, whereas safety rules and work practices was identified as the most neglected factor. The study contributed to the body of knowledge by unveiling the deviations in existing dimensions of SC and SP. The refined model is expected to concisely measure the SP in the Pakistani construction industry, however, caution must be exercised while generalizing the study results to other developing countries.

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 3 2014-07-01 2014-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 3 2011-07-01 2011-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 3 2012-07-01 2012-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

29 CFR 505.6 - Safety and health standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 3 2013-07-01 2013-07-01 false Safety and health standards. 505.6 Section 505.6 Labor... HUMANITIES § 505.6 Safety and health standards. (a) Standards. Section 5(i)(2) and section 7(g)(2) of the Act... dangerous to the health and safety of the employees engaged in such project or production. Compliance with...

78 FR 73692 - Revisions to Safety Standards for Infant Bath Seats, Toddler Beds, and Full-Size Baby Cribs

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-09

... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision... standard. Section 26(c) of the CPSA also provides that states or political subdivisions of states may apply... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Parts 1215, 1217 and 1219 Revisions to Safety Standards...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

30 CFR 6.30 - MSHA listing of equivalent non-MSHA product safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false MSHA listing of equivalent non-MSHA product... LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.30 MSHA listing of equivalent non-MSHA product safety standards. MSHA evaluated the following non-MSHA product safety standards and determined that they provide...

48 CFR 1352.271-82 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1352.271-82 Section 1352.271-82 Federal Acquisition... of Provisions and Clauses 1352.271-82 Department of Labor occupational safety and health standards... Occupational Safety and Health Standards for Ship Repair (APR 2010) The contractor, in performance of all work...

Evidence Review Conducted for the Agency for Healthcare Research and Quality Safety Program for Improving Surgical Care and Recovery: Focus on Anesthesiology for Colorectal Surgery.

PubMed

Ban, Kristen A; Gibbons, Melinda M; Ko, Clifford Y; Wick, Elizabeth C; Cannesson, Maxime; Scott, Michael J; Grant, Michael C; Wu, Christopher L

2018-04-11

The Agency for Healthcare Research and Quality, in partnership with the American College of Surgeons and the Johns Hopkins Medicine Armstrong Institute for Patient Safety and Quality, has developed the Safety Program for Improving Surgical Care and Recovery (ISCR), which is a national effort to disseminate best practices in perioperative care to more than 750 hospitals across multiple procedures in the next 5 years. The program will integrate evidence-based processes central to enhanced recovery and prevention of surgical site infection, venous thromboembolic events, catheter-associated urinary tract infections with socioadaptive interventions to improve surgical outcomes, patient experience, and perioperative safety culture. The objectives of this review are to evaluate the evidence supporting anesthesiology components of colorectal (CR) pathways and to develop an evidence-based CR protocol for implementation. Anesthesiology protocol components were identified through review of existing CR enhanced recovery pathways from several professional associations/societies and expert feedback. These guidelines/recommendations were supplemented by evidence made further literature searches. Anesthesiology protocol components were identified spanning the immediate preoperative, intraoperative, and postoperative phases of care. Components included carbohydrate loading, reduced fasting, multimodal preanesthesia medication, antibiotic prophylaxis, blood transfusion, intraoperative fluid management/goal-directed fluid therapy, normothermia, a standardized intraoperative anesthesia pathway, and standard postoperative multimodal analgesic regimens.

NASA Occupant Protection Standards Development

NASA Technical Reports Server (NTRS)

Somers, Jeffrey; Gernhardt, Michael; Lawrence, Charles

2012-01-01

Historically, spacecraft landing systems have been tested with human volunteers, because analytical methods for estimating injury risk were insufficient. These tests were conducted with flight-like suits and seats to verify the safety of the landing systems. Currently, NASA uses the Brinkley Dynamic Response Index to estimate injury risk, although applying it to the NASA environment has drawbacks: (1) Does not indicate severity or anatomical location of injury (2) Unclear if model applies to NASA applications. Because of these limitations, a new validated, analytical approach was desired. Leveraging off of the current state of the art in automotive safety and racing, a new approach was developed. The approach has several aspects: (1) Define the acceptable level of injury risk by injury severity (2) Determine the appropriate human surrogate for testing and modeling (3) Mine existing human injury data to determine appropriate Injury Assessment Reference Values (IARV). (4) Rigorously Validate the IARVs with sub-injurious human testing (5) Use validated IARVs to update standards and vehicle requirement

Traceability of Software Safety Requirements in Legacy Safety Critical Systems

NASA Technical Reports Server (NTRS)

Hill, Janice L.

2007-01-01

How can traceability of software safety requirements be created for legacy safety critical systems? Requirements in safety standards are imposed most times during contract negotiations. On the other hand, there are instances where safety standards are levied on legacy safety critical systems, some of which may be considered for reuse for new applications. Safety standards often specify that software development documentation include process-oriented and technical safety requirements, and also require that system and software safety analyses are performed supporting technical safety requirements implementation. So what can be done if the requisite documents for establishing and maintaining safety requirements traceability are not available?

Frontline staff motivation levels and health care quality in rural and urban primary health facilities: a baseline study in the Greater Accra and Western regions of Ghana.

PubMed

Alhassan, Robert Kaba; Nketiah-Amponsah, Edward

2016-12-01

The population of Ghana is increasingly becoming urbanized with about 70 % of the estimated 26.9 million people living in urban and peri-urban areas. Nonetheless, eight out of the ten regions in Ghana remain predominantly rural where only 32.1 % of the national health sector workforce works. Doctor-patient ratio in a predominantly rural region is about 1:18,257 compared to 1:4,099 in an urban region. These rural-urban inequities significantly account for the inability of Ghana to attain the health related Millennium Development Goals (MDGs) before the end of 2015. To ascertain whether or not rural-urban differences exist in health worker motivation levels and quality of health care in health facilities accredited by the National Health Insurance Authority in Ghana. This is a baseline quantitative study conducted in 2012 among 324 health workers in 64 accredited clinics located in 9 rural and 7 urban districts in Ghana. Ordered logistic regression was performed to determine the relationship between facility geographic location (rural/urban) and staff motivation levels, and quality health care standards. Quality health care and patient safety standards were averagely low in the sampled health facilities. Even though health workers in rural facilities were more de-motivated by poor availability of resources and drugs than their counterparts in urban facilities (p < 0.05), quality of health care and patient safety standards were relatively better in rural facilities. For Ghana to attain the newly formulated sustainable development goals on health, there is the need for health authorities to address the existing rural-urban imbalances in health worker motivation and quality health care standards in primary healthcare facilities. Future studies should compare staff motivation levels and quality standards in accredited and non-accredited health facilities since the current study was limited to health facilities accredited by the National Health Insurance Authority.

Safe laser application requires more than laser safety

NASA Astrophysics Data System (ADS)

Frevel, A.; Steffensen, B.; Vassie, L.

1995-02-01

An overview is presented concerning aspects of laser safety in European industrial laser use. Surveys indicate that there is a large variation in the safety strategies amongst industrial laser users. Some key problem areas are highlighted. Emission of hazardous substances is a major problem for users of laser material processing systems where the majority of the particulate is of a sub-micrometre size, presenting a respiratory hazard. Studies show that in many cases emissions are not frequently monitored in factories and uncertainty exists over the hazards. Operators of laser machines do not receive adequate job training or safety training. The problem is compounded by a plethora of regulations and standards which are difficult to interpret and implement, and inspectors who are not conversant with the technology or the issues. A case is demonstrated for a more integrated approach to laser safety, taking into account the development of laser applications, organizational and personnel development, in addition to environmental and occupational health and safety aspects. It is necessary to achieve a harmonization between these elements in any organization involved in laser technology. This might be achieved through establishing technology transfer centres in laser technology.

Toy Age-Labeling: An Overview for Pediatricians of How Toys Receive Their Age Safety and Developmental Designations.

PubMed

Kulak, Shuli; Stein, Ruth E K

2016-07-01

Injuries related to toys continue to cause significant childhood morbidity and mortality, despite considerable government regulation of the toy industry. Recent controversy related to toys that contain strong magnets demonstrate the dangers they pose to children. The pediatric community is often unaware of how toys receive their developmental and safety labeling and the degree to which age-labeling on toys can be discretionary. Toy labeling has 2 basic manifestations. The first, safety labeling for hazards like small parts, balloons, or small balls that may present a choking risk, is mandatory. The second, "developmental" age-labeling, describes the age of the children for which the toy is intended, and sometimes has discretionary components. This article provides a review of the regulations governing toy age-safety standards and how they are reflected on toy packaging to help pediatric practitioners apply safety advice across settings and patient characteristics. We review the existing age-labeling regulations and processes and discuss the major areas where children remain vulnerable despite labeling. Finally, we list some recommendations for counseling parents about toy safety. Copyright © 2016 by the American Academy of Pediatrics.

Discussions about safety criteria and guidelines for radioactive waste management.

PubMed

Yamamoto, Masafumi

2011-07-01

In Japan, the clearance levels for uranium-bearing waste have been established by the Nuclear Safety Commission (NSC). The criteria for uranium-bearing waste disposal are also necessary; however, the NSC has not concluded the discussion on this subject. Meanwhile, the General Administrative Group of the Radiation Council has concluded the revision of its former recommendation 'Regulatory exemption dose for radioactive solid waste disposal', the dose criteria after the institutional control period for a repository. The Standardization Committee on Radiation Protection in the Japan Health Physics Society (The Committee) also has developed the relevant safety criteria and guidelines for existing exposure situations, which are potentially applicable to uranium-bearing waste disposal. A new working group established by The Committee was initially aimed at developing criteria and guidelines specifically for uranium-bearing waste disposal; however, the aim has been shifted to broader criteria applicable to any radioactive wastes.

Traceability of patient records usage: barriers and opportunities for improving user interface design and data management.

PubMed

Cruz-Correia, Ricardo; Lapão, Luís; Rodrigues, Pedro Pereira

2011-01-01

Although IT governance practices (like ITIL, which recommends on the use of audit logs for proper service level management) are being introduced in many Hospitals to cope with increasing levels of information quality and safety requirements, the standard maturity levels of hospital IT departments is still not enough to reach the level of frequent use of audit logs. This paper aims to address the issues related to the existence of AT in patient records, describe the Hospitals scenario and to produce recommendations. Representatives from four hospitals were interviewed regarding the use of AT in their Hospital IS. Very few AT are known to exist in these hospitals (average of 1 per hospital in an estimate of 21 existing IS). CIOs should to be much more concerned with the existence and maintenance of AT. Recommendations include server clock synchronization and using advanced log visualization tools.

29 CFR 1924.1 - Applicable safety standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 29 Labor 7 2011-07-01 2011-07-01 false Applicable safety standards. 1924.1 Section 1924.1 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY STANDARDS APPLICABLE TO WORKSHOPS AND REHABILITATION FACILITIES ASSISTED BY GRANTS § 1924...

49 CFR 212.213 - Motive power and equipment (MP&E) inspector.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of determining compliance with all sections of the Freight Car Safety Standards (49 CFR part 215... maintenance standards accepted in the industry; and (ii) The Freight Car Safety Standards, Safety Glazing... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State...

49 CFR 212.213 - Motive power and equipment (MP&E) inspector.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of determining compliance with all sections of the Freight Car Safety Standards (49 CFR part 215... maintenance standards accepted in the industry; and (ii) The Freight Car Safety Standards, Safety Glazing... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State...

49 CFR 212.213 - Motive power and equipment (MP&E) inspector.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of determining compliance with all sections of the Freight Car Safety Standards (49 CFR part 215... maintenance standards accepted in the industry; and (ii) The Freight Car Safety Standards, Safety Glazing... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State...

49 CFR 212.213 - Motive power and equipment (MP&E) inspector.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of determining compliance with all sections of the Freight Car Safety Standards (49 CFR part 215... maintenance standards accepted in the industry; and (ii) The Freight Car Safety Standards, Safety Glazing... RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION STATE SAFETY PARTICIPATION REGULATIONS State...

Health and safety management systems: liability or asset?

PubMed

Bennett, David

2002-01-01

Health and safety management systems have a background in theory and in various interests among employers and workplace health and safety professionals. These have resulted in a number of national systems emanating from national standard-writing centres and from employers' organizations. In some cases these systems have been recognized as national standards. The contenders for an international standard have been the International Organization of Standardization (ISO) and the International Labour Organization (ILO). The quality and environmental management systems of ISO indicate what an ISO health and safety management standard would look like. The ILO Guidelines on Safety and Health Management Systems, by contrast, are stringent, specific and potentially effective in improving health and safety performance in the workplace.

International Safety Regulation and Standards for Space Travel and Commerce

NASA Astrophysics Data System (ADS)

Pelton, J. N.; Jakhu, R.

The evolution of air travel has led to the adoption of the 1944 Chicago Convention that created the International Civil Aviation Organization (ICAO), headquartered in Montreal, Canada, and the propagation of aviation safety standards. Today, ICAO standardizes and harmonizes commercial air safety worldwide. Space travel and space safety are still at an early stage of development, and the adoption of international space safety standards and regulation still remains largely at the national level. This paper explores the international treaties and conventions that govern space travel, applications and exploration today and analyzes current efforts to create space safety standards and regulations at the national, regional and global level. Recent efforts to create a commercial space travel industry and to license commercial space ports are foreseen as means to hasten a space safety regulatory process.

Systematic Evaluation Program (SEP) at Rocky Flats Plant: An overview of practical management issues for evaluation of natural phenomena hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badwan, F.M.; Herring, K.S.

1993-08-01

Many of the buildings at the Rocky Flats Plant were designed and built before modern standards were developed, including standards for protection against extreme natural phenomenon such as tornadoes, earthquakes, and floods. The purpose of the SEP is to establish an integrated approach to assessing the design adequacy of specific high and moderate hazard Rocky Flats facilities from a safety perspective and to establish a basis for defining any needed facility improvements. The SEP is to be carried out in three Phases. In Phase 1, topics to be evaluated and an evaluation plan for each topic were developed. Any differencesmore » between Current Design Requirements (CDR) or acceptance criteria and the design of existing facilities, will be identified during Phase 2 and assessed using an integrated systematic approach during Phase 3. The integrated assessment performed during Phase 3 provides a process for evaluating the differences between existing facility design and CDRs so that decisions on corrective actions can be made on the basis of relative risk reduction and cost effectiveness. These efforts will ensure that a balanced and integrated level of safety is achieved for long-term operation of these buildings. Through appropriate selection of topics and identification of the structures, systems, and components to be evaluated, the SEP will address outstanding design issues related to the prevention and mitigation of design basis accidents, including those arising from natural phenomena. The objective of the SEP is not to bring these buildings into strict compliance with current requirements, but rather to ensure that an adequate level of safety is achieved in an economical fashion.« less

Pesticide management approach towards protecting the safety and health of farmers in Southeast Asia.

PubMed

Mohammad, Norsyazwani; Abidin, Emilia Zainal; How, Vivien; Praveena, Sarva Mangala; Hashim, Zailina

2018-06-27

It is estimated that pesticide production and use have increased continuously in the countries of Southeast Asia in recent years. Within the context of protecting the safety and health of workers in the agricultural sector, there is an existing gap in the implementation of the pesticide management framework because safety and health effects arising from occupational exposures continue to be reported. This study aims to provide narrative similarities, differences and weaknesses of the existing pesticide management system in Southeast Asian countries (Brunei, Cambodia, Indonesia, Laos, Malaysia, Myanmar, Philippines, Singapore, Thailand and Vietnam) within the context of occupational safety and health. This is preliminary traditional review study. Pesticide regulation and management at the country level were identified using web-based search engines such as Scopus, ScienceDirect, PubMed and Google. Book, reports, legislation document and other documents retrieved were also gathered from international organizations and specific websites of governmental agency in Southeast Asian countries. The scope of this review is only limited to literature written in English. In total, 44 review articles, reports and documents were gathered for this study. The approach of pesticide management in protecting safety and health in the agricultural setting were benchmarked according to the elements introduced by the United States Environmental Protection Agency, namely, (1) the protection of workers and (2) the practice of safety. All countries have assigned a local authority and government organization to manage and control pesticide use in the agricultural sector. The countries with the highest usage of pesticide are Thailand, Philippines and Malaysia. Most Southeast Asian countries have emphasized safety practice in the management of pesticide usage, but there were less emphasis on the element of protection of workers within the framework in Indonesia, Myanmar, Thailand and Vietnam. The governing bodies in the countries of Southeast Asia have placed significant effort to develop framework related to pesticide management at the country level. The implementation of pesticide management based on the existing framework is evident in most of the countries but needs to be improved. It is suggested that emphasis be given to the implementation of diagnosis, health surveillance and reporting system as well as following or adopting standard guidelines for the protection of workers in terms of safety and health in the agricultural sector.

49 CFR 659.15 - System safety program standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program standard. 659.15 Section 659... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the State Oversight Agency § 659.15 System safety program standard. (a) General requirement. Each state...

29 CFR 1910.18 - Changes in established Federal standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 1910.18 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.18 Changes in established Federal standards. Whenever an occupational safety and health...

29 CFR 1910.18 - Changes in established Federal standards.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 1910.18 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.18 Changes in established Federal standards. Whenever an occupational safety and health...

Commercial Motor Vehicle Driver Obstructive Sleep Apnea Screening and Treatment in the United States: An Update and Recommendation Overview.

PubMed

Colvin, Loretta J; Collop, Nancy A

2016-01-01

No regulatory mandate exists in the United States (U.S.) for comprehensive obstructive sleep apnea (OSA) risk assessment and stratification for commercial motor vehicle (CMV) drivers. Current Federal Motor Carrier Safety Administration (FMCSA) requirements are outdated and depend largely on subjective report, a less reliable strategy in an occupational setting. Without FMCSA standards, sleep specialists, occupational medical examiners and employers rely on a collection of medical consensus recommendations to establish standards of care. These recommendations advise OSA risk assessment through a combination of focused medical history, physical examination, questionnaires, and accident history, which increase OSA detection compared to current FMCSA standards. For those diagnosed with OSA, consensus-based risk stratification helps identify CMV drivers who may benefit from OSA treatment and establish minimum standards for assessing treatment efficacy and adherence. Unfortunately no consolidated recommendation exists; rather, publications span medical and governmental literature in a patchwork fashion that no longer fully reflect current practice due to subsequent advances in OSA diagnosis, treatment, and technology. Based on searches of medical literature, internet materials, and reference lists from existing publications, an overview and discussion of key published recommendations regarding OSA assessment and treatment in CMV operators is provided. Suggestions for incorporating these recommendations into clinical sleep medicine practice in the U.S. are presented. The challenge for sleep specialists is maintaining the delicate balance between recommendations impacting standard of care and associated medico-legal impact with stakeholder interests from medical, regulatory, industry and public perspectives while providing high quality and efficient care. © 2016 American Academy of Sleep Medicine.

Risk-based requirements management framework with applications to assurance cases

NASA Astrophysics Data System (ADS)

Feng, D.; Eyster, C.

The current regulatory approach for assuring device safety primarily focuses on compliance with prescriptive safety regulations and relevant safety standards. This approach, however, does not always lead to a safe system design even though safety regulations and standards have been met. In the medical device industry, several high profile recalls involving infusion pumps have prompted the regulatory agency to reconsider how device safety should be managed, reviewed and approved. An assurance case has been cited as a promising tool to address this growing concern. Assurance cases have been used in safety-critical systems for some time. Most assurance cases, if not all, in literature today are developed in an ad hoc fashion, independent from risk management and requirement development. An assurance case is a resource-intensive endeavor that requires additional effort and documentation from equipment manufacturers. Without a well-organized requirements infrastructure in place, such “ additional effort” can be substantial, to the point where the cost of adoption outweighs the benefit of adoption. In this paper, the authors present a Risk-Based Requirements and Assurance Management (RBRAM) methodology. The RBRAM is an elaborate framework that combines Risk-Based Requirements Management (RBRM) with assurance case methods. Such an integrated framework can help manufacturers leverage an existing risk management to present a comprehensive assurance case with minimal additional effort while providing a supplementary means to reexamine the integrity of the system design in terms of the mission objective. Although the example used is from the medical industry, the authors believe that the RBRAM methodology underlines the fundamental principle of risk management, and offers a simple, yet effective framework applicable to aerospace industry, perhaps, to any industry.

Assessment of the Draft AIAA S-119 Flight Dynamic Model Exchange Standard

NASA Technical Reports Server (NTRS)

Jackson, E. Bruce; Murri, Daniel G.; Hill, Melissa A.; Jessick, Matthew V.; Penn, John M.; Hasan, David A.; Crues, Edwin Z.; Falck, Robert D.; McCarthy, Thomas G.; Vuong, Nghia;

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2013 CFR

2013-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

29 CFR 1960.19 - Other Federal agency standards affecting occupational safety and health.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety and health. 1960.19 Section 1960.19 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL... EMPLOYEE OCCUPATIONAL SAFETY AND HEALTH PROGRAMS AND RELATED MATTERS Standards § 1960.19 Other Federal agency standards affecting occupational safety and health. (a) Where employees of different agencies...

78 FR 18965 - Submission for OMB Review; Comment Request: Safety Standard for Cigarette Lighters

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

... Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product Safety Commission. ACTION: Notice... Commission's safety standard for cigarette lighters, 16 CFR part 1210. DATES: Written comments on this... Cigarette Lighters, 16 CFR part 1210. One comment was received in response to that notice. The commenter...

75 FR 38172 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... requirements of its safety standards. The individual petition is described below, including the party seeking... European safety standards for crash-worthiness and related safety measures for use on its proposed high... certain requirements of 49 CFR part 238, Passenger Equipment Safety Standards (Sec. Sec. 238.115, 238.121...

76 FR 52231 - Restrictions on Operators Employing Former Flight Standards Service Aviation Safety Inspectors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... Standards Service Aviation Safety Inspectors AGENCY: Federal Aviation Administration (FAA), DOT. ACTION... responsible for the oversight of, a Flight Standards Service Aviation Safety Inspector, and had direct... . SUPPLEMENTARY INFORMATION: Authority for This Rulemaking The FAA's authority to issue rules on aviation safety...

The International Safety Framework for nuclear power source applications in outer space-Useful and substantial guidance

NASA Astrophysics Data System (ADS)

Summerer, L.; Wilcox, R. E.; Bechtel, R.; Harbison, S.

2015-06-01

In 2009, the International Safety Framework for Nuclear Power Source Applications in Outer Space was adopted, following a multi-year process that involved all major space faring nations under the auspices of a partnership between the UN Committee on the Peaceful Uses of Outer Space and the International Atomic Energy Agency. The Safety Framework reflects an international consensus on best practices to achieve safety. Following the 1992 UN Principles Relevant to the Use of Nuclear Power Sources in Outer Space, it is the second attempt by the international community to draft guidance promoting the safety of applications of nuclear power sources in space missions. NPS applications in space have unique safety considerations compared with terrestrial applications. Mission launch and outer space operational requirements impose size, mass and other space environment limitations not present for many terrestrial nuclear facilities. Potential accident conditions could expose nuclear power sources to extreme physical conditions. The Safety Framework is structured to provide guidance for both the programmatic and technical aspects of safety. In addition to sections containing specific guidance for governments and for management, it contains technical guidance pertinent to the design, development and all mission phases of space NPS applications. All sections of the Safety Framework contain elements directly relevant to engineers and space mission designers for missions involving space nuclear power sources. The challenge for organisations and engineers involved in the design and development processes of space nuclear power sources and applications is to implement the guidance provided in the Safety Framework by integrating it into the existing standard space mission infrastructure of design, development and operational requirements, practices and processes. This adds complexity to the standard space mission and launch approval processes. The Safety Framework is deliberately generic to remain relevantly independent of technological progress, of national organisational setups and of space mission types. Implementing its guidance therefore leaves room for interpretation and adaptation. Relying on reported practices, we analyse the guidance particularly relevant to engineers and space mission designers.

Health and safety programs for art and theater schools.

PubMed

McCann, M

2001-01-01

A wide variety of health and safety hazards exist in schools and colleges of art and theater due to a lack of formal health and safety programs and a failure to include health and safety concerns during planning of new facilities and renovation of existing facilities. This chapter discusses the elements of a health and safety program as well as safety-related structural and equipment needs that should be in the plans for any school of art or theater. These elements include curriculum content, ventilation, storage, housekeeping, waste management, fire and explosion prevention, machine and tool safety, electrical safety, noise, heat stress, and life safety and emergency procedures and equipment. Ideally, these elements should be incorporated into the plans for any new facilities, but ongoing programs can also benefit from a review of existing health and safety programs.

Assessment and Rehabilitation Issues Concerning Existing 70’s Structural Stock

NASA Astrophysics Data System (ADS)

Sabareanu, E.

2017-06-01

The last 30 years were very demanding in terms of norms and standards change concerning the structural calculus for buildings, leaving a large stock of structures erected during 70-90 decades in a weak position concerning seismic loads and loads level for live loads, wind and snow. In the same time, taking into account that a large amount of buildings are in service all over the country, they cannot be demolished, but suitable rehabilitation methods should be proposed, structural durability being achieved. The paper proposes some rehabilitation methods suitable in terms of structural safety and cost optimization for diaphragm reinforced concrete structures, with an example on an existing multi storey building.

Reduction and standardization of surgical instruments in pediatric inguinal hernia repair.

PubMed

Koyle, Martin A; AlQarni, Naif; Odeh, Rakan; Butt, Hissan; Alkahtani, Mohammed M; Konstant, Louis; Pendergast, Lisa; Koyle, Leah C C; Baker, G Ross

2018-02-01

To standardize and reduce surgical instrumentation by >25% within a 9-month period for pediatric inguinal hernia repair (PIHR), using "improvement science" methodology. We prospectively evaluated instruments used for PIHR in 56 consecutive cases by individual surgeons across two separate subspecialties, pediatric surgery (S) and pediatric urology (U), to measure actual number of instruments used compared with existing practice based on preference cards. Based on this evaluation, a single preference card was developed using only instruments that had been used in >50% of all cases. A subsequent series of 52 cases was analyzed to assess whether the new tray contained the ideal instrumentation. Cycle time (CT), to sterilize and package the instruments, and weights of the trays were measured before and after the intervention. A survey of operating room (OR) nurses and U and S surgeons was conducted before and after the introduction of the standardized tray to assess the impact and perception of standardization. Prior to creating the standardized tray, a U PIHR tray contained 96 instruments with a weight of 13.5 lbs, while the S set contained 51, weighing 11.2 lbs. The final standardized set comprised 28 instruments and weighed 7.8 lbs. Of 52 PIHRs performed after standardization, in three (6%) instances additional instruments were requested. CT was reduced from 11 to 8 min (U and S respectively) to <5 min for the single tray. Nurses and surgeons reported that quality, safety, and efficiency were improved, and that efforts should continue to standardize instrumentation for other common surgeries. Standardization of surgical equipment can be employed across disciplines with the potential to reduce costs and positively impact quality, safety, and efficiencies. Copyright © 2017 Journal of Pediatric Urology Company. Published by Elsevier Ltd. All rights reserved.

An analysis of students' perceptions to Just Culture in the aviation industry: A study of a Midwest aviation training program (case study)

NASA Astrophysics Data System (ADS)

Mohammed, Lazo Akram

The research will focus on the discussion of the ways in which the top-down nature of Safety Management Systems (SMS) can be used to create `Just Culture' within the aviation industry. Specific focus will be placed on an aviation program conducted by an accredited university, with the institution in focus being the midwest aviation training program. To this end, a variety of different aspects of safety culture in aviation and aviation management will be considered. The focus on the implementation strategies vital for the existence of a `Just Culture' within the aviation industry in general, and particularly within the aforementioned institution's aerospace program. Some ideas and perspectives will be subsequently suggested and designed for implementation, within the institution's program. The aspect of enhancing the overall safety output gained, from the institution, as per standards set within the greater American Aviation industry will be examined. Overall, the paper will seek to showcase the vital importance of implementing the SMS standardization model in the institution's Aerospace program, while providing some areas of concern. Such concerns will be based on a number of issues, which are pertinent to the overall enhancement of the institution's observance of aviation safety. This will be both in general application of an SMS, as well as personalized/ specific applications in areas in need of improvement. Overall, through the paper, the author hopes to provide a better understanding of the institution's placement, with regard to not only aviation safety, but also the implementation of an effective `Just Culture' within the program.

76 FR 70885 - Updating Fire Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... DEPARTMENT OF VETERANS AFFAIRS 38 CFR Part 59 RIN 2900-AN57 Updating Fire Safety Standards AGENCY... Fire Protection Association (NFPA) 101. This rule helps ensure the safety of veterans in the affected... publications are: NFPA 10, Standard for Portable Fire Extinguishers; NFPA 99, Standard for Health Care...

Protection of Workers and Third Parties during the Construction of Linear Structures

NASA Astrophysics Data System (ADS)

Vlčková, Jitka; Venkrbec, Václav; Henková, Svatava; Chromý, Adam

2017-12-01

The minimization of risk in the workplace through a focus on occupational health and safety (OHS) is one of the primary objectives for every construction project. The most serious accidents in the construction industry occur during work on earthworks and linear structures. The character of such structures places them among those posing the greatest threat to the public (referred to as “third parties”). They can be characterized as large structures whose construction may involve the building site extending in a narrow lane alongside previously constructed objects currently in use by the public. Linear structures are often directly connected to existing objects or buildings, making it impossible to guard the whole construction site. However, many OHS problems related to linear structures can be prevented during the design stage. The aim of this article is to introduce a new methodology which has been implemented into a computer program that deals with safety measures at construction sites where work is performed on linear structures. Based on existing experience with the design of such structures and their execution and supervision by safety coordinators, the basic types of linear structures, their location in the terrain, the conditions present during their execution and other marginal conditions and influences were modelled. Basic safety information has been assigned to this elementary information, which is strictly necessary for the construction process. The safety provisions can be grouped according to type, e.g. technical, organizational and other necessary documentation, or into sets of provisions concerning areas such as construction site safety, transport safety, earthworks safety, etc. The selection of the given provisions takes place using multiple criteria. The aim of creating this program is to provide a practical tool for designers, contractors and construction companies. The model can contribute to the sufficient awareness of these participants about technical and organizational provisions that can help them to meet workplace safety requirements. The software for the selection of safety provisions also contains module that can calculate necessary cost estimates using a calculation formula chosen by the user. All software data conform to European standards harmonized for the Czech Republic.

Application of the Life Safety Code to a Historic Test Stand

NASA Technical Reports Server (NTRS)

Askins, Bruce; Lemke, Paul R.; Lewis, William L.; Covell, Carol C.

2011-01-01

NASA has conducted a study to assess alternatives to refurbishing existing launch vehicle modal test facilities as opposed to developing new test facilities to meet the demands of a very fiscally constrained test and evaluation environment. The results of this study showed that Marshall Space Flight Center (MSFC) Test Stand (TS) 4550 could be made compliant, within reasonable cost and schedule impacts, if safety processes and operational limitations were put in place to meet the safety codes and concerns of the Fire Marshall. Trades were performed with key selection criteria to ensure that appropriate levels of occupant safety are incorporated into test facility design modifications. In preparation for the ground vibration tests that were to be performed on the Ares I launch vehicle, the Ares Flight and Integrated Test Office (FITO) organization evaluated the available test facility options, which included the existing mothballed structural dynamic TS4550 used by Apollo and Shuttle, alternative ground vibration test facilities at other locations, and construction of a new dynamic test stand. After an exhaustive assessment of the alternatives, the results favored modifying the TS4550 because it was the lowest cost option and presented the least schedule risk to the NASA Constellation Program for Ares Integrated Vehicle Ground Vibration Test (IVGVT). As the renovation design plans and drawings were being developed for TS4550, a safety concern was discovered the original design for the construction of the test stand, originally built for the Apollo Program and renovated for the Shuttle Program, was completed before NASA s adoption of the currently imposed safety and building codes per National Fire Protection Association Life Safety Code [NFPA 101] and International Building Codes. The initial FITO assessment of the design changes, required to make TS4550 compliant with current safety and building standards, identified a significant cost increase and schedule impact. An effort was launched to thoroughly evaluate the applicable life safety requirements, examine the context in which they were derived, and determine a means by which the TS4550 modifications could be made within budget and on schedule, while still providing the occupants with appropriate levels of safety.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brunett, A. J.; Fei, T.; Strons, P. S.

The Transient Reactor Test Facility (TREAT), located at Idaho National Laboratory (INL), is a test facility designed to evaluate the performance of reactor fuels and materials under transient accident conditions. The facility, an air-cooled, graphite-moderated reactor designed to utilize fuel containing high-enriched uranium (HEU), has been in non-operational standby status since 1994. Currently, in support of the missions of the Department of Energy (DOE) National Nuclear Security Administration (NNSA) Material Management and Minimization (M3) Reactor Conversion Program, a new core design is being developed for TREAT that will utilize low-enriched uranium (LEU). The primary objective of this conversion effort ismore » to design an LEU core that is capable of meeting the performance characteristics of the existing HEU core. Minimal, if any, changes are anticipated for the supporting systems (e.g. reactor trip system, filtration/cooling system, etc.); therefore, the LEU core must also be able to function with the existing supporting systems, and must also satisfy acceptable safety limits. In support of the LEU conversion effort, a range of ancillary safety analyses are required to evaluate the LEU core operation relative to that of the existing facility. These analyses cover neutronics, shielding, and thermal hydraulic topics that have been identified as having the potential to have reduced safety margins due to conversion to LEU fuel, or are required to support the required safety analyses documentation. The majority of these ancillary tasks have been identified in [1] and [2]. The purpose of this report is to document the ancillary safety analyses that have been performed at Argonne National Laboratory during the early stages of the LEU design effort, and to describe ongoing and anticipated analyses. For all analyses presented in this report, methodologies are utilized that are consistent with, or improved from, those used in analyses for the HEU Final Safety Analysis Report (FSAR) [3]. Depending on the availability of historical data derived from HEU TREAT operation, results calculated for the LEU core are compared to measurements obtained from HEU TREAT operation. While all analyses in this report are largely considered complete and have been reviewed for technical content, it is important to note that all topics will be revisited once the LEU design approaches its final stages of maturity. For most safety significant issues, it is expected that the analyses presented here will be bounding, but additional calculations will be performed as necessary to support safety analyses and safety documentation. It should also be noted that these analyses were completed as the LEU design evolved, and therefore utilized different LEU reference designs. Preliminary shielding, neutronic, and thermal hydraulic analyses have been completed and have generally demonstrated that the various LEU core designs will satisfy existing safety limits and standards also satisfied by the existing HEU core. These analyses include the assessment of the dose rate in the hodoscope room, near a loaded fuel transfer cask, above the fuel storage area, and near the HEPA filters. The potential change in the concentration of tramp uranium and change in neutron flux reaching instrumentation has also been assessed. Safety-significant thermal hydraulic items addressed in this report include thermally-induced mechanical distortion of the grid plate, and heating in the radial reflector.« less

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2013 CFR

2013-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2012 CFR

2012-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2014 CFR

2014-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2011 CFR

2011-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 19 Customs Duties 1 2012-04-01 2012-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 19 Customs Duties 1 2014-04-01 2014-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

19 CFR 12.85 - Coast Guard boat and associated equipment safety standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Coast Guard boat and associated equipment safety... SECURITY; DEPARTMENT OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Safety Standards for Boats and Associated Equipment § 12.85 Coast Guard boat and associated equipment safety standards. (a) Applicability of...

48 CFR 1371.113 - Department of Labor occupational safety and health standards for ship repair.

Code of Federal Regulations, 2010 CFR

2010-10-01

... occupational safety and health standards for ship repair. 1371.113 Section 1371.113 Federal Acquisition... CONSTRUCTION AND SHIP REPAIR Provisions and Clauses 1371.113 Department of Labor occupational safety and health standards for ship repair. Insert clause 1352.271-82, Department of Labor Occupational Safety and Health...

Assuring Rural Hospital Patient Safety: What Should Be the Priorities?

ERIC Educational Resources Information Center

Coburn, Andrew F.; Wakefield, Mary; Casey, Michelle; Moscovice, Ira; Payne, Susan; Loux, Stephenie

2004-01-01

Context: Since reports on patient safety were issued by the Institute of Medicine, a number of interventions have been recommended and standards designed to improve hospital patient safety, including the Leapfrog, evidence-based safety standards. These standards are based on research conducted largely in urban hospitals, and it may not be possible…

49 CFR 571.224 - Standard No. 224; Rear impact protection.

Code of Federal Regulations, 2014 CFR

2014-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.224 Standard No. 224; Rear impact protection. S1. Scope. This... motor vehicle, as defined in 49 CFR 171.8, is certified to carry hazardous materials and has a rear...

49 CFR 571.224 - Standard No. 224; Rear impact protection.

Code of Federal Regulations, 2012 CFR

2012-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.224 Standard No. 224; Rear impact protection. S1. Scope. This... motor vehicle, as defined in 49 CFR 171.8, is certified to carry hazardous materials and has a rear...

49 CFR 571.224 - Standard No. 224; Rear impact protection.

Code of Federal Regulations, 2013 CFR

2013-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE SAFETY STANDARDS Federal Motor Vehicle Safety Standards § 571.224 Standard No. 224; Rear impact protection. S1. Scope. This... motor vehicle, as defined in 49 CFR 171.8, is certified to carry hazardous materials and has a rear...

APhA 2011 REMS white paper: Summary of the REMS stakeholder meeting on improving program design and implementation.

PubMed

American Pharmacists Association; Bough, Marcie

2011-01-01

To develop an improved risk evaluation and mitigation strategies (REMS) system for maximizing effective and safe patient medication use while minimizing burden on the health care delivery system. 34 stakeholders gathered October 6-7, 2010, in Arlington, VA, for the REMS Stakeholder Meeting, convened by the American Pharmacists Association (APhA). Participants included national health care provider associations, including representatives for physicians, physician assistants, nurses, nurse practitioners, and pharmacists, as well as representatives for patient advocates, drug distributors, community pharmacists (chain and independent), drug manufacturer associations (brand, generic, and biologic organizations), and health information technology, standards, and safety organizations. Staff from the Food and Drug Administration (FDA) Center for Drug Evaluation and Research participated as observers. The meeting built on themes from the APhA's 2009 REMS white paper. The current REMS environment presents many challenges for health care providers due to the growing number of REMS programs and the lack of standardization or similarities among various REMS programs. A standardized REMS process that focuses on maximizing patient safety and minimizing impacts on patient access and provider implementation could offset these challenges. A new process that includes effective provider interventions and standardized tools and systems for implementing REMS programs may improve patient care and overcome some of the communication issues providers and patients currently face. Metrics could be put in place to evaluate the effectiveness of REMS elements. By incorporating REMS program components into existing technologies and data infrastructures, achieving REMS implementation that is workflow neutral and minimizes administrative burden may be possible. An appropriate compensation model could ensure providers have adequate resources for patient care and REMS implementation. Overall, stakeholders should continue to work collaboratively with FDA and manufacturers to improve REMS program design and implementation issues. A workable REMS system will require effective patient interventions, standardized elements that limit barriers to implementation for both patients and providers, standardized yet flexible implementation strategies, use of existing technologies in practice settings, increased opportunities for provider input early in REMS design processes, improved communication strategies and awareness of program requirements, and viable provider compensation models needed to offset costs to implement and comply with REMS program requirements.

Ethics and choosing appropriate means to an end: problems with coal mine and nuclear workplace safety.

PubMed

Shrader-Frechette, Kristin; Cooke, Roger

2004-02-01

A common problem in ethics is that people often desire an end but fail to take the means necessary to achieve it. Employers and employees may desire the safety end mandated by performance standards for pollution control, but they may fail to employ the means, specification standards, necessary to achieve this end. This article argues that current (de jure) performance standards, for lowering employee exposures to ionizing radiation, fail to promote de facto worker welfare, in part because employers and employees do not follow the necessary means (practices known as specification standards) to achieve the end (performance standards) of workplace safety. To support this conclusion, the article argues that (1) safety requires attention to specification, as well as performance, standards; (2) coal-mine specification standards may fail to promote performance standards; (3) nuclear workplace standards may do the same; (4) choosing appropriate means to the end of safety requires attention to the ways uncertainties and variations in exposure may mask violations of standards; and (5) correcting regulatory inattention to differences between de jure and de facto is necessary for achievement of ethical goals for safety.

Assessment of Safety Standards for Automotive Electronic Control Systems

DOT National Transportation Integrated Search

2016-06-01

This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

Using Occupational Safety and Health Administration accident investigations to study patterns in work fatalities.

PubMed

Mendeloff, J M; Kagey, B T

1990-11-01

Investigations of fatalities by the Occupational Safety and Health Administration (OSHA) provide the most detailed available information about traumatic workplace deaths that are potentially related to violations of existing safety standards. Comparison of the number of such deaths investigated by OSHA from 1977 to 1986 with the comparable category of deaths reported to the Bureau of Labor Statistics Survey of Occupational Injuries and Illnesses indicates that the overall magnitudes have been roughly similar. The OSHA data contain more information than other sources and are especially valuable for analyses of fatalities at smaller workplaces. The OSHA data show that death rates decline sharply with establishment size; the inverted "U" pattern for lost workday injury rates is absent. Because accident investigations are conducted as part of an administrative system, the OSHA data can be influenced by changes in administrative policies. Changes over time in the percent of fatalities in which violations of OSHA standards were cited have clearly been influenced by changes in OSHA citation policy and thus do not provide a valid measure of the rate of violation-caused deaths. Realization of the epidemiological value of this data source depends upon a commitment from OSHA to maintain consistency in investigating accidents and to improve its data collection methods.

Planning the Unplanned Experiment: Assessing the Efficacy of Standards for Safety Critical Software

NASA Technical Reports Server (NTRS)

Graydon, Patrick J.; Holloway, C. Michael

2015-01-01

We need well-founded means of determining whether software is t for use in safety-critical applications. While software in industries such as aviation has an excellent safety record, the fact that software aws have contributed to deaths illustrates the need for justi ably high con dence in software. It is often argued that software is t for safety-critical use because it conforms to a standard for software in safety-critical systems. But little is known about whether such standards `work.' Reliance upon a standard without knowing whether it works is an experiment; without collecting data to assess the standard, this experiment is unplanned. This paper reports on a workshop intended to explore how standards could practicably be assessed. Planning the Unplanned Experiment: Assessing the Ecacy of Standards for Safety Critical Software (AESSCS) was held on 13 May 2014 in conjunction with the European Dependable Computing Conference (EDCC). We summarize and elaborate on the workshop's discussion of the topic, including both the presented positions and the dialogue that ensued.

Optimization of coastal protection measures on small islands in the northfrisian part of the North Sea

NASA Astrophysics Data System (ADS)

Wöffler, T.; Jensen, J.; Schüttrumpf, H.

2017-12-01

Low lying small islands are among the most vulnerable regions worldwide due to the consequences of climate change. The reasons for this are the concentration of infrastructure, geographical features and their small size. Worldwide special forms and adaptations of coastal protection strategies and measures can be found on small islands. In the northfrisian part of the North Sea worldwide unique strategies and measures have been developed in the last centuries due to the geographic location and the isolation during extreme events. One special feature of their coastal protection strategy is the lack of dikes. For this reason, the houses are built on artificial dwelling mounds in order to protect the inhabitants and their goods against frequently occurring inundations during storm surge seasons (up to 30 times a year). The Hallig islands themselves benefit by these inundations due to sediments, which are accumulated on the island's surfaces. This sedimentation has enabled a natural adaption to sea level rise in the past. Nevertheless, the construction methods of the coastal protection measures are mainly based on tradition and the knowledge of the inhabitants. No resilient design approaches and safety standards for these special structures like dwelling mounds and elevated revetments exist today. For this reason, neither a cost efficient construction nor a prioritization of measures is possible. Main part of this paper is the scientific investigation of the existing coastal protection measures with the objective of the development of design approaches and safety standards. The results will optimize the construction of the existing coastal protection measures and can be transferred to other small islands and low lying areas worldwide.

Success, failures and costs of implementing standards in the USA--lessons for infection control.

PubMed

McGowan, J E

1995-06-01

In the US, extensive standards for performance and 'guidelines for practice' have been instituted by a number of governmental and non-governmental agencies. New governmental plans for health care depend heavily on practice guidelines, and the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) has been especially enthusiastic about continuous quality improvement. Monitoring the appropriateness of care and altering physician practice appeals to insurance carriers and health care management organizations. Some initial data exist to show that the quality of health care has been enhanced by these regulations. The total cost for health care administration in 1990 in the USA was 24.8% of each hospital's spending for health care. Much of this was associated with spending for new initiatives in practice guidelines, physician profiling, quality assurance, and the like. Few data exist to show that the quality of health care or hospital infection control has been enhanced by these expenditures. Regulations and guidelines also have proliferated in infection control. Guides from the JCAHO have been expanded, and recent mandates from the Occupational Health and Safety Administration (OSHA) for protecting employees from blood-borne and respiratory pathogens promise to be especially costly for health care organizations to implement. Little data exist to show that the quality of infection control has been enhanced by these regulations. Standards are difficult to develop, because the science to back them up often is lacking, interpretation of validating data is imprecise, and inherent biological variation makes exceptions common. Seven lessons are important for those developing standards today. These include focusing on objective measures of the impact of the standard, clearly indicating the degree of scientific validity, making the development process inclusive, allowing for local variation, making sure that funding is provided for mandated standards, considering non-scientific implications of standards, and remaining involved in the process after the guideline is developed. Infection control workers should make sure that standards developed take the lessons above into account before they are promulgated.

Hazards To The Eye From UV

NASA Astrophysics Data System (ADS)

Zuclich, Joseph A.

1980-10-01

Ocular effects of ultraviolet radiation, 200-400 nm, are reviewed. Depending upon the exposure parameter involved, UV radiation may be harmful to the cornea, lens and/or retina. Ranges of exposure parameters (wavelength, exposure duration, etc.) for which each of the tissues is susceptible are specified and the nature of the tissue is described. Present understanding of the thermal and photochemical damage mechanism operative for various conditions of exposure are discussed Ocular damage thresholds for wide ranges of exposure parameters are summarized and compared to existing safety standards.

Cannon Air Force base New Mexico, Installation of Digital Airport Surveillance Radar, Final Environmental Assessment

DTIC Science & Technology

2005-07-06

C95.1-1991, American National Standard Safety Levels With Respect to Human Exposure to Radiofrequency Electromagnetic Fields , 300 kHz to 100 GHz. New...Site 4) were evaluated for possible siting of the ASR- 11. All three sites are situated in undeveloped fields on base. Site 2 is located between the...alternative ASR-1 1 sites. 3.12 ELECTROMAGNETIC ENERGY 3.12.1 Existing Conditions Electrical currents and components generate electrical fields and

A critical assessment on the role of sentinel node mapping in endometrial cancer.

PubMed

Bogani, Giorgio; Ditto, Antonino; Martinelli, Fabio; Signorelli, Mauro; Perotto, Stefania; Lorusso, Domenica; Raspagliesi, Francesco

2015-10-01

Endometrial cancer is the most common gynecologic malignancy in the developed countries. Although the high incidence of this occurrence no consensus, about the role of retroperitoneal staging, still exists. Growing evidence support the safety and efficacy of sentinel lymph node mapping. This technique is emerging as a new standard for endometrial cancer staging procedures. In the present paper, we discuss the role of sentinel lymph node mapping in endometrial cancer, highlighting the most controversies features.

Energetic-particle-induced geodesic acoustic mode.

PubMed

Fu, G Y

2008-10-31

A new energetic particle-induced geodesic acoustic mode (EGAM) is shown to exist. The mode frequency and mode structure are determined nonperturbatively by energetic particle kinetic effects. In particular the EGAM frequency is found to be substantially lower than the standard GAM frequency. The radial mode width is determined by the energetic particle drift orbit width and can be fairly large for high energetic particle pressure and large safety factor. These results are consistent with the recent experimental observation of the beam-driven n=0 mode in DIII-D.

2011 Annual Criticality Safety Program Performance Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrea Hoffman

The 2011 review of the INL Criticality Safety Program has determined that the program is robust and effective. The review was prepared for, and fulfills Contract Data Requirements List (CDRL) item H.20, 'Annual Criticality Safety Program performance summary that includes the status of assessments, issues, corrective actions, infractions, requirements management, training, and programmatic support.' This performance summary addresses the status of these important elements of the INL Criticality Safety Program. Assessments - Assessments in 2011 were planned and scheduled. The scheduled assessments included a Criticality Safety Program Effectiveness Review, Criticality Control Area Inspections, a Protection of Controlled Unclassified Information Inspection,more » an Assessment of Criticality Safety SQA, and this management assessment of the Criticality Safety Program. All of the assessments were completed with the exception of the 'Effectiveness Review' for SSPSF, which was delayed due to emerging work. Although minor issues were identified in the assessments, no issues or combination of issues indicated that the INL Criticality Safety Program was ineffective. The identification of issues demonstrates the importance of an assessment program to the overall health and effectiveness of the INL Criticality Safety Program. Issues and Corrective Actions - There are relatively few criticality safety related issues in the Laboratory ICAMS system. Most were identified by Criticality Safety Program assessments. No issues indicate ineffectiveness in the INL Criticality Safety Program. All of the issues are being worked and there are no imminent criticality concerns. Infractions - There was one criticality safety related violation in 2011. On January 18, 2011, it was discovered that a fuel plate bundle in the Nuclear Materials Inspection and Storage (NMIS) facility exceeded the fissionable mass limit, resulting in a technical safety requirement (TSR) violation. The TSR limits fuel plate bundles to 1085 grams U-235, which is the maximum loading of an ATR fuel element. The overloaded fuel plate bundle contained 1097 grams U-235 and was assembled under an 1100 gram U-235 limit in 1982. In 2003, the limit was reduced to 1085 grams citing a new criticality safety evaluation for ATR fuel elements. The fuel plate bundle inventories were not checked for compliance prior to implementing the reduced limit. A subsequent review of the NMIS inventory did not identify further violations. Requirements Management - The INL Criticality Safety program is organized and well documented. The source requirements for the INL Criticality Safety Program are from 10 CFR 830.204, DOE Order 420.1B, Chapter III, 'Nuclear Criticality Safety,' ANSI/ANS 8-series Industry Standards, and DOE Standards. These source requirements are documented in LRD-18001, 'INL Criticality Safety Program Requirements Manual.' The majority of the criticality safety source requirements are contained in DOE Order 420.1B because it invokes all of the ANSI/ANS 8-Series Standards. DOE Order 420.1B also invokes several DOE Standards, including DOE-STD-3007, 'Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities.' DOE Order 420.1B contains requirements for DOE 'Heads of Field Elements' to approve the criticality safety program and specific elements of the program, namely, the qualification of criticality staff and the method for preparing criticality safety evaluations. This was accomplished by the approval of SAR-400, 'INL Standardized Nuclear Safety Basis Manual,' Chapter 6, 'Prevention of Inadvertent Criticality.' Chapter 6 of SAR-400 contains sufficient detail and/or reference to the specific DOE and contractor documents that adequately describe the INL Criticality Safety Program per the elements specified in DOE Order 420.1B. The Safety Evaluation Report for SAR-400 specifically recognizes that the approval of SAR-400 approves the INL Criticality Safety Program. No new source requirements were released in 2011. A revision to LRD-18001 is planned for 2012 to clarify design requirements for criticality alarms. Training - Criticality Safety Engineering has developed training and provides training for many employee positions, including fissionable material handlers, facility managers, criticality safety officers, firefighters, and criticality safety engineers. Criticality safety training at the INL is a program strength. A revision to the training module developed in 2010 to supplement MFC certified fissionable material handlers (operators) training was prepared and presented in August of 2011. This training, 'Applied Science of Criticality Safety,' builds upon existing training and gives operators a better understanding of how their criticality controls are derived. Improvements to 00INL189, 'INL Criticality Safety Principles' are planned for 2012 to strengthen fissionable material handler training.« less

76 FR 24561 - Railroad Safety Advisory Committee; Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-02

... Passenger Hours of Service, Training Standards, Track Safety Standards, Dark Territory, Passenger Safety... FRA on railroad safety matters. The RSAC is composed of 54 voting representatives from 31 member...

Beryllium Health and Safety Committee Data Reporting Task Force White Paper #2 -- Uses of Uncensored Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

MacQueen, D H

2007-10-10

On December 8, 1999, the Department of Energy (DOE) published Title 10 CFR 850 (hereafter referred to as the Rule) to establish a chronic beryllium disease prevention program (CBDPP) to: (1) reduce the number of workers currently exposed to beryllium in the course of their work at DOE facilities managed by DOE or its contractors; (2) minimize the levels of, and potential for, exposure to beryllium; and (3) establish medical surveillance requirements to ensure early detection of the disease. On January 4, 2001, DOE issued DOE G 440.1-7A, Implementation Guide for use with 10 CFR 850, Chronic Beryllium Disease Preventionmore » Program, to assist line managers in meeting their responsibilities for implementing the CBDPP. That guide describes methods and techniques that DOE considers acceptable in complying with the Rule. In 2005 a draft DOE Technical Standard ''Management of Items and Areas Containing Low Levels of Beryllium'' (SAFT 0103; hereafter referred to as the ''TS'') was circulated for comment (http://www.hss.energy.gov/NuclearSafety/techstds/tsdrafts/saft-0103.pdf). DOE technical standards are voluntary consensus standards developed when industry standards do not exist (see http://www.hss.energy.gov/NuclearSafety/techstds/index.html for more information). DOE does not require its field elements to implement DOE technical standards, but field elements may choose to adopt these standards to meet specific needs. This beryllium TS is intended to provide best practices and lessons learned for manageing items and areas that contain low levels of beryllium, which has been a costly and technically challenging component of CBDPPs. The TS is also intended to provide guidance for determining if the Rule's housekeeping and release criteria are met. On challenge the TS addressed was the statistical interpretation of data sets with non-detected results, a topic for which no strong consensus exists. Among the many comments on the draft TS was a suggestion that certain of the statistical comparisons described in the TS could be better implemented if analytical results, even when below a reporting limit, were to be reported by analytical laboratories. See Appendix 1 for a review of terminology related to reporting limits. The Beryllium Health and Safety Committee (BHSC) formed a Sampling and Analysis Subcommittee (SAS) in 2003. The SAS established a working group on accreditation and reporting limits. By 2006 it had become evident that the issues extended to data reporting as a whole. The SAS proposed to the BHSC the formation of a Data Reporting Task Force (DRTF) to consider issues related to data reporting. The BHSC Board agreed, and requested that the DRTF generate a white paper, to be offered by the BHSC to potential interested parties such as the DOE policy office that is responsible for beryllium health and safety policy. It was noted that additional products could include detailed guidance and potentially a journal article in the future. The SAS proposed that DRTF membership represent the affected disciplines (chemists, industrial hygiene professionals and statisticians, and the DOE office that is responsible for beryllium health and safety policy). The BHSC Board decided that DRTF membership should come from DOE sites, since the focus would be on reporting in the context of the TS and the Rule. The DRTF came into existence in late 2006. The DRTF membership includes industrial hygienists, analytical chemists and laboratory managers, members of the regulatory and oversight community, and environmental statisticians. A first White Paper, ''Summary of Issues and Path Forward'', was reviewed by the BHSC in March 2007 and issued by the DRTF in June 2007. It describes the charter of the DRTF, introduces some basic terminology (reproduced here in Appendix 1), lays out the issues the DRTF is expected to address, and describes a path forward for the DRTF's work. This first White Paper is available through the BHSC web site. This White Paper presents recommendations developed by the DRTF following the process laid out in that first White Paper.« less

29 CFR 5.15 - Limitations, variations, tolerances, and exemptions under the Contract Work Hours and Safety...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the Contract Work Hours and Safety Standards Act. 5.15 Section 5.15 Labor Office of the Secretary of... WORK HOURS AND SAFETY STANDARDS ACT) Davis-Bacon and Related Acts Provisions and Procedures § 5.15 Limitations, variations, tolerances, and exemptions under the Contract Work Hours and Safety Standards Act. (a...

77 FR 22564 - Proposed Collection; Comment Request; Safety Standards for Full-Size Baby Cribs and Non-Full-Size...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-16

... child care centers' compliance with the recent CPSC safety standards for full-size and non-full-size... CONSUMER PRODUCT SAFETY COMMISSION [Docket No. CPSC-2012-0019] Proposed Collection; Comment Request; Safety Standards for Full- Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY...

29 CFR 1910.17 - Effective dates.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.17... Harbor Workers' Compensation Act, that occupational safety and health standard as incorporated by...

29 CFR 1910.17 - Effective dates.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.17... Harbor Workers' Compensation Act, that occupational safety and health standard as incorporated by...

76 FR 22019 - Safety Standard for Toddler Beds

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-20

... warnings should increase consumers' understanding of the connection between the relevant behaviors and... CONSUMER PRODUCT SAFETY COMMISSION 16 CFR Part 1217 RIN 3041-AC79 Safety Standard for Toddler Beds AGENCY: Consumer Product Safety Commission. ACTION: Final rule. SUMMARY: The Consumer Product Safety...

75 FR 22303 - Safety Standard for Bassinets and Cradles: Notice of Proposed Rulemaking

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... an infant's development. Once an infant can push up by him/herself, a number of hazards are created... ``Commission'') to promulgate consumer product safety standards for durable infant or toddler products. These... product safety standards for durable infant or toddler products. These standards are to be ``substantially...

50 CFR 600.355 - National Standard 10-Safety of Life at Sea.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Sea. 600.355 Section 600.355 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... Standards § 600.355 National Standard 10—Safety of Life at Sea. (a) Standard 10. Conservation and management measures shall, to the extent practicable, promote the safety of human life at sea. (b) General. (1...

77 FR 71752 - Federal Motor Vehicle Safety Standards; Lamps, Reflective Devices, and Associated Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-04

... [Docket No. NHTSA-2012-0174] RIN 2127-Al27 Federal Motor Vehicle Safety Standards; Lamps, Reflective... less than 30 feet in overall length, to the Federal motor vehicle safety standard (FMVSS) on lamps... final rule reorganizing the standard on December 4, 2007. DATES: Comments to this proposal must be...

Status of Occupational Health and Safety and Related Challenges in Expanding Economy of Tanzania.

PubMed

Mrema, Ezra J; Ngowi, Aiwerasia V; Mamuya, Simon H D

2015-01-01

Occupational health and safety is related with economic activities undertaken in the country. As the economic activities grow and expand, occupational injuries and diseases are more likely to increase among workers in different sectors of economy such as agriculture, mining, transport, and manufacture. This may result in high occupational health and safety services demand, which might be difficult to meet by developing countries that are prioritizing economic expansion without regard to their impact on occupational health and safety. To describe the status of occupational health and safety in Tanzania and outline the challenges in provision of occupational health services under the state of an expanding economy. Tanzania's economy is growing steadily, with growth being driven by communications, transport, financial intermediation, construction, mining, agriculture, and manufacturing. Along with this growth, hazards emanating from work in all sectors of the economy have increased and varied. The workers exposed to these hazards suffer from illness and injuries and yet they are not provided with adequate occupational health services. Services are scanty and limited to a few enterprises that can afford it. Existing laws and regulations are not comprehensive enough to cover the entire population. Implementation of legislation is weak and does not protect the workers. Most Tanzanians are not covered by the occupational health and safety law and do not access occupational health services. Thus an occupational health and safety services strategy, backed by legislations and provided with the necessary resources (competent experts, financial and technological resources), is a necessity in Tanzania. The existing legal provisions require major modifications to meet international requirements and standards. OHS regulations and legislations need refocusing, revision, and strengthening to cover all working population. Capacities should be improved through training and research to enable enforcement. Finally the facilities and resources should be made available for OHS services to match with the growing economy. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Hooked on a feeling: emotional labor as an occupational hazard of the post-industrial age.

PubMed

Andrews, Bonnie K; Karcz, Susan; Rosenberg, Beth

2008-01-01

Emotional labor is a subtle but serious occupational hazard that is likely to spread rapidly as the global service economy continues to grow. Emotional labor requires more than just acting friendly and being helpful to customers; the worker must manage his or her emotions to create a company-dictated experience for customers. The practice of emotional labor in an unsupportive work environment produces work-related stress, which has a wide range of potentially serious health effects. Though many employers do not acknowledge the existence of emotional labor, it is a real occupational hazard that may generate life-altering effects on physical and emotional health. While no official regulations or identification standards specify emotional labor as an occupational hazard, some guidelines exist regarding its outcome: occupational stress. Emotional labor should be recognized as an occupational hazard by the Occupational Safety and Health Administration (OSHA), but this hazard does not lend itself to regulation through standards. The business culture that demands its performance is questioned.

Calculation of the state of safety (SOS) for lithium ion batteries

NASA Astrophysics Data System (ADS)

Cabrera-Castillo, Eliud; Niedermeier, Florian; Jossen, Andreas

2016-08-01

As lithium ion batteries are adopted in electric vehicles and stationary storage applications, the higher number of cells and greater energy densities increases the risks of possible catastrophic events. This paper shows a definition and method to calculate the state of safety of an energy storage system based on the concept that safety is inversely proportional to the concept of abuse. As the latter increases, the former decreases to zero. Previous descriptions in the literature are qualitative in nature but don't provide a numerical quantification of the safety of a storage system. In the case of battery testing standards, they only define pass or fail criteria. The proposed state uses the same range as other commonly used state quantities like the SOC, SOH, and SOF, taking values between 0, completely unsafe, and 1, completely safe. The developed function combines the effects of an arbitrary number of subfunctions, each of which describes a particular case of abuse, in one or more variables such as voltage, temperature, or mechanical deformation, which can be detected by sensors or estimated by other techniques. The state of safety definition can be made more general by adding new subfunctions, or by refining the existing ones.

Recommendation for standardization of haematology reporting units used in the extended blood count.

PubMed

Brereton, M; McCafferty, R; Marsden, K; Kawai, Y; Etzell, J; Ermens, A

2016-10-01

It is desirable in the interest of patient safety that the reporting of laboratory results should be standardized where no valid reason for diversity exists. This study considers the reporting units used for the extended blood cell count and makes a new ICSH recommendation to encourage standardization worldwide. This work is based on a literature review that included the original ICSH recommendations and on data gathered from an international survey of current practice completed by 18 countries worldwide. The survey results show that significant diversity in the use of reporting units for the blood count exists worldwide. The use of either non-SI or other units not recommended by the ICSH in the early 1980s has persisted despite the guidance from that time. The diversity in use of reporting units occurs in three areas: the persistence in use of non-SI units for RBC, WBC and platelet counts, the use of three different units for haemoglobin concentration and the manual reporting of WBC differential, reticulocytes and nucleated RBCs when the latter are available from automated analysis or can be expressed as absolute numbers by calculation. A new recommendation with a rationale for each parameter is made for standardization of the reporting units used for the extended blood count. © 2016 John Wiley & Sons Ltd.

Retinal, functional, and morphological comparisons of two different macaque species, Macaca mulatta and Macaca fasicularis, for models of laser eye injury

NASA Astrophysics Data System (ADS)

DiCarlo, Cheryl D.; Hacker, Henry D.; Brown, Araceli; Cheramie, Rachael; Martinsen, Gary L.; Rockwell, Benjamin; Stuck, Bruce E.

2005-04-01

The past several years has seen a severe shortage of pathogen-free Indian origin rhesus macaques due to the increased requirement for this model in retroviral research. With greater than 30 years of research data accumulated using the Rhesus macaque as the model for laser eye injury there exists a need to bridge to a more readily available nonhuman primate model. Much of the data previously collected from the Rhesus monkey (Macaca mulatta) provided the basis for the American National Standards Institute (ANSI) standards for laser safety. Currently a Tri-service effort is underway to utilize the Cynomolgus monkey (Macaca fasicularis) as a replacement for the Rhesus macaque. Preliminary functional and morphological baseline data collected from multifocal electroretinography (mfERG), optical coherence tomography (OCT) and retinal cell counts were compared from a small group of monkeys and tissues to determine if significant differences existed between the species. Initial functional findings rom mfERG yielded only one difference for the n2 amplitude value which was greater in the Cynomolgus monkey. No significant differences were seen in retinal and foveal thickness, as determined by OCT scans and no significant differences were seen in ganglion cell and inner nuclear cell nuclei counts. A highly significant difference was seen in the numbers of photoreceptor nuclei with greater numbers in the Rhesus macaque. This indicates more studies should be performed to determine the impact that a model change would have on the laser bioeffects community and their ability to continue to provide minimal visible lesion data for laser safety standards. The continued goal of this project will be to provide that necessary baseline information for a seamless transition to a more readily available animal model.

Thimerosal as discrimination: vaccine disparity in the UN Minamata Convention on mercury.

PubMed

Sykes, Lisa K; Geier, David A; King, Paul G; Kern, Janet K; Haley, Boyd E; Chaigneau, Carmen G; Megson, Mary N; Love, James M; Reeves, Robert E; Geier, Mark R

2014-01-01

When addressing toxins, one unmistakable parallel exists between biology and politics: developing children and developing nations are those most vulnerable to toxic exposures. This disturbing parallel is the subject of this critical review, which examines the use and distribution of the mercury (Hg)-based compound, thimerosal, in vaccines. Developed in 1927, thimerosal is 49.55% Hg by weight and breaks down in the body into ethyl-Hg chloride, ethyl-Hg hydroxide and sodium thiosalicylate. Since the early 1930s, there has been evidence indicating that thimerosal poses a hazard to the health of human beings and is ineffective as an antimicrobial agent. While children in the developed and predominantly western nations receive doses of mostly no-thimerosal and reduced-thimerosal vaccines, children in the developing nations receive many doses of several unreduced thimerosal-containing vaccines (TCVs). Thus, thimerosal has continued to be a part of the global vaccine supply and its acceptability as a component of vaccine formulations remained unchallenged until 2010, when the United Nations (UN), through the UN Environment Programme, began negotiations to write the global, legally binding Minamata Convention on Hg. During the negotiations, TCVs were dropped from the list of Hg-containing products to be regulated. Consequently, a double standard in vaccine safety, which previously existed due to ignorance and economic reasons, has now been institutionalised as global policy. Ultimately, the Minamata Convention on Hg has sanctioned the inequitable distribution of thimerosal by specifically exempting TCVs from regulation, condoning a two-tier standard of vaccine safety: a predominantly no-thimerosal and reduced-thimerosal standard for developed nations and a predominantly thimerosal-containing one for developing nations. This disparity must now be evaluated urgently as a potential form of institutionalised discrimination.

Connoted hazard and perceived importance of fluorescent, neon, and standard safety colors.

PubMed

Zielinska, O A; Mayhorn, C B; Wogalter, M S

2017-11-01

The perceived hazard and rated importance of standard safety, fluorescent, and neon colors are investigated. Colors are used in warnings to enhance hazard communication. Red has consistently been rated as the highest in perceived hazard. Orange, yellow, and black are the next highest in connoted hazard; however, there is discrepancy in their ordering. Safety standards, such as ANSI Z535.1, also list colors to convey important information, but little research has examined the perceived importance of colors. In addition to standard safety colors, fluorescent colors are more commonly used in warnings. Understanding hazard and importance perceptions of standard safety and fluorescent colors is necessary to create effective warnings. Ninety participants rated and ranked a total of 33 colors on both perceived hazard and perceived importance. Rated highest were the safety red colors from the American National Standard Institute (ANSI), International Organization for Standardization (ISO), and Federal Highway Administration (FHWA) together with three fluorescent colors (orange, yellow, and yellow-green) from 3 M on both dimensions. Rankings were similar to ratings except that fluorescent orange was the highest on perceived hazard, while fluorescent orange and safety red from the ANSI were ranked as the highest in perceived importance. Fluorescent colors convey hazard and importance levels as high as the standard safety red colors. Implications for conveying hazard and importance in warnings through color are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Guide to the Application of Probability Risk Assessment Methodology and Hazard Risk Frequency Criteria as a Hazard Control for the Use of the Mobile Servicing System on the International Space Station

NASA Astrophysics Data System (ADS)

D'silva, Oneil; Kerrison, Roger

2013-09-01

A key feature for the increased utilization of space robotics is to automate Extra-Vehicular manned space activities and thus significantly reduce the potential for catastrophic hazards while simultaneously minimizing the overall costs associated with manned space. The principal scope of the paper is to evaluate the use of industry standard accepted Probability risk/safety assessment (PRA/PSA) methodologies and Hazard Risk frequency Criteria as a hazard control. This paper illustrates the applicability of combining the selected Probability risk assessment methodology and hazard risk frequency criteria, in order to apply the necessary safety controls that allow for the increased use of the Mobile Servicing system (MSS) robotic system on the International Space Station. This document will consider factors such as component failure rate reliability, software reliability, and periods of operation and dormancy, fault tree analyses and their effects on the probability risk assessments. The paper concludes with suggestions for the incorporation of existing industry Risk/Safety plans to create an applicable safety process for future activities/programs

Physicians Asking Patients About Guns: Promoting Patient Safety, Respecting Patient Rights.

PubMed

Parent, Brendan

2016-10-01

Recent debate on whether physicians should discuss gun ownership with their patients has centered on determining whether gun injuries are an issue of health or safety, and on protecting patient privacy. Yet, physicians' duties span personal health, public health, and safety spheres, and they often must address private patient matters. To prioritize gun safety and reduce gun injuries, the primary policy-driving question should be: will physician counseling on gun ownership effectively reduce gun-related injuries without interfering with the physician's other treatment obligations or compromising the physician-patient relationship? Existing data on physician-initiated conversations with patients about guns support a positive prevention effect. However, it is critical that physician-initiated discussions of safe gun practices are not motivated by, nor convey, disapproval of gun ownership. To be ethical, respectful, and efficient, the conversation should be standard between primary care providers and all of their patients (not limited to patient subsets); questions and education should be limited to topics of gun-ownership risks and storage practices; and the conversation must be framed without bias against gun ownership.

A status review of photovoltaic power conversion equipment reliability, safety, and quality assurance protocols

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hacke, Peter; Lokanath, Sumanth; Williams, Paul

Data indicate that the inverter is the element of the photovoltaic plant that has the highest number of service calls and the greatest operation and maintenance cost burden. This paper describes the projects and relevant background needed in developing design qualification standards that would serve to establish a minimum level of reliability, along with a review of photovoltaic inverter quality and safety standards, most of which are in their infancy. We compare stresses and levels for accelerated testing of inverters proposed in the standard drafts, and those proposed by manufacturers and purchasers of inverters. We also review bases for themore » methods, stress types, and stress levels for durability testing of key inverter components. Many of the test protocols appear to need more comprehensive inclusion of stress factors existing in the natural environment such as wind driven rain, dust, and grid disturbances. Further understanding of how temperature, humidity ingress, and voltage bias affect the inverters and their components is also required. We provide data indicating inconsistent quality of the inverters and the durability of components leading to greater cost for the photovoltaic plant operator. Accordingly, the recommendation for data collection within quality standards for obtaining cost of ownership metrics is made. Design validation testing using realistic operation, environmental, and connection conditions, including under end-use field conditions with feedback for continuous improvement is recommended for inclusion within a quality standard.« less

A status review of photovoltaic power conversion equipment reliability, safety, and quality assurance protocols

DOE PAGES

Hacke, Peter; Lokanath, Sumanth; Williams, Paul; ...

2017-10-10

Data indicate that the inverter is the element of the photovoltaic plant that has the highest number of service calls and the greatest operation and maintenance cost burden. This paper describes the projects and relevant background needed in developing design qualification standards that would serve to establish a minimum level of reliability, along with a review of photovoltaic inverter quality and safety standards, most of which are in their infancy. We compare stresses and levels for accelerated testing of inverters proposed in the standard drafts, and those proposed by manufacturers and purchasers of inverters. We also review bases for themore » methods, stress types, and stress levels for durability testing of key inverter components. Many of the test protocols appear to need more comprehensive inclusion of stress factors existing in the natural environment such as wind driven rain, dust, and grid disturbances. Further understanding of how temperature, humidity ingress, and voltage bias affect the inverters and their components is also required. We provide data indicating inconsistent quality of the inverters and the durability of components leading to greater cost for the photovoltaic plant operator. Accordingly, the recommendation for data collection within quality standards for obtaining cost of ownership metrics is made. Design validation testing using realistic operation, environmental, and connection conditions, including under end-use field conditions with feedback for continuous improvement is recommended for inclusion within a quality standard.« less

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in... delay connectors. [A copy of Title 49 is available at any Metal and Nonmetal Mine Safety and Health...

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in... delay connectors. [A copy of Title 49 is available at any Metal and Nonmetal Mine Safety and Health...

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in... delay connectors. [A copy of Title 49 is available at any Metal and Nonmetal Mine Safety and Health...

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in... delay connectors. [A copy of Title 49 is available at any Metal and Nonmetal Mine Safety and Health...

29 CFR 1910.16 - Longshoring and marine terminals.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.16 Longshoring and marine terminals. (a) Safety and health standards for longshoring. (1...

29 CFR 1910.16 - Longshoring and marine terminals.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.16 Longshoring and marine terminals. (a) Safety and health standards for longshoring. (1...

Fluid-flow-rate metrology: laboratory uncertainties and traceabilities

NASA Astrophysics Data System (ADS)

Mattingly, G. E.

1991-03-01

Increased concerns for improved fluid flowrate measurement are driving the fluid metering community-meter manufacturers and users alike-to search for better verification and documentation for their fluid measurements. These concerns affect both our domestic and international market places they permeate our technologies - aerospace chemical processes automotive bioengineering etc. They involve public health and safety and they impact our national defense. These concerns are based upon the rising value of fluid resources and products and the importance of critical material accountability. These values directly impact the accuracy needs of fluid buyers and sellers in custody transfers. These concerns impact the designers and operators of chemical process systems where control and productivity optimization depend critically upon measurement precision. Public health and safety depend upon the quality of numerous pollutant measurements - both liquid and gaseous. The performance testing of engines - both automotive and aircraft are critically based upon accurate fuel measurements - both liquid and oxidizer streams. Fluid flowrate measurements are established differently from counterparts in length and mass measurement systems because these have the benefits of " identity" standards. For rate measurement systems the metrology is based upon " derived standards" . These use facilities and transfer standards which are designed built characterized and used to constitute basic measurement capabilities and quantify performance - accuracy and precision. Because " identity standards" do not exist for flow measurements facsimiles or equivalents must

Laying the Groundwork for Enterprise-Wide Medical Language Processing Services: Architecture and Process

PubMed Central

Chen, Elizabeth S.; Maloney, Francine L.; Shilmayster, Eugene; Goldberg, Howard S.

2009-01-01

A systematic and standard process for capturing information within free-text clinical documents could facilitate opportunities for improving quality and safety of patient care, enhancing decision support, and advancing data warehousing across an enterprise setting. At Partners HealthCare System, the Medical Language Processing (MLP) services project was initiated to establish a component-based architectural model and processes to facilitate putting MLP functionality into production for enterprise consumption, promote sharing of components, and encourage reuse. Key objectives included exploring the use of an open-source framework called the Unstructured Information Management Architecture (UIMA) and leveraging existing MLP-related efforts, terminology, and document standards. This paper describes early experiences in defining the infrastructure and standards for extracting, encoding, and structuring clinical observations from a variety of clinical documents to serve enterprise-wide needs. PMID:20351830

Laying the groundwork for enterprise-wide medical language processing services: architecture and process.

PubMed

Chen, Elizabeth S; Maloney, Francine L; Shilmayster, Eugene; Goldberg, Howard S

2009-11-14

A systematic and standard process for capturing information within free-text clinical documents could facilitate opportunities for improving quality and safety of patient care, enhancing decision support, and advancing data warehousing across an enterprise setting. At Partners HealthCare System, the Medical Language Processing (MLP) services project was initiated to establish a component-based architectural model and processes to facilitate putting MLP functionality into production for enterprise consumption, promote sharing of components, and encourage reuse. Key objectives included exploring the use of an open-source framework called the Unstructured Information Management Architecture (UIMA) and leveraging existing MLP-related efforts, terminology, and document standards. This paper describes early experiences in defining the infrastructure and standards for extracting, encoding, and structuring clinical observations from a variety of clinical documents to serve enterprise-wide needs.

48 CFR 22.403-3 - Contract Work Hours and Safety Standards Act.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 1 2011-10-01 2011-10-01 false Contract Work Hours and... Standards for Contracts Involving Construction 22.403-3 Contract Work Hours and Safety Standards Act. The Contract Work Hours and Safety Standards Act (40 U.S.C. 3701 et seq.) requires that certain contracts (see...

77 FR 45242 - Revisions to Safety Standards for Durable Infant or Toddler Products: Infant Bath Seats and Full...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-31

... direction in the Danny Keysar Child Product Safety Notification Act to issue standards for durable infant or... not usually subject to CPSC's standards, such as child care facilities, family child care homes, and... standard issued under the Danny Keysar Child Product Safety Notification Act was based, the revision...

77 FR 63800 - Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-17

... CONSUMER PRODUCT SAFETY COMMISSION Proposed Extension of Approval of Information Collection; Comment Request--Safety Standard for Walk-Behind Power Lawn Mowers AGENCY: Consumer Product Safety.... Chapter 35), the Consumer Product Safety Commission (CPSC) requested comments on a proposed extension of...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2010 CFR

2010-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2013 CFR

2013-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2012 CFR

2012-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2011 CFR

2011-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

30 CFR 75.1 - Scope.

Code of Federal Regulations, 2014 CFR

2014-07-01

... SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES General § 75.1 Scope. This part 75 sets forth safety standards compliance with which is mandatory in each underground coal mine subject to the Federal Mine Safety and Health Act...

78 FR 52848 - Occupational Safety and Health Standards for Aircraft Cabin Crewmembers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-27

... [Docket No.: FAA-2012-0953] Occupational Safety and Health Standards for Aircraft Cabin Crewmembers AGENCY... regulation of some occupational safety and health conditions affecting cabin crewmembers on aircraft by the Occupational Safety and Health Administration. This policy statement will enhance occupational safety and...

75 FR 22317 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-28

... 1300 [Docket No. NHTSA-2010-0054] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, incomplete vehicles, motorcycles, and motor vehicle...

77 FR 69586 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-20

... [Docket No. NHTSA-2012-0155] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of..., multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle equipment. DATES: You...

Can fire safety in hotels be improved? Results from the survey of a panel of experts in Spain.

PubMed

Rubio-Romero, Juan Carlos; Márquez-Sierra, Francisco; Suárez-Cebador, Manuel

2016-06-08

The hotel industry is an important driver of the European labour market with over 250,000 hotels employing some 2 million people. In Spain, 240 workers were injured by fires in hotels from 2004 to 2008. Fire is considered to be the most important risk in the hotel industry, but the lack of an EU-wide data recording system for hotels makes it difficult to give exact figures for fire events. We analysed the state of fire prevention systems in hotels in Spain with the aim of proposing strategies to improve fire safety. A 10-item questionnaire was administered from 2007 to 2009 to 15 Spanish experts in fire safety. The questions were measured using a Likert scale and classified into 4 sections: current state of installations, influence of establishment characteristics, application of regulations and priority ranking of actions. Descriptive statistics summarized the data and t-tests evaluated the agreement foreach statement in the questionnaire. The statistical analysis showed homogeneity in the responses by the experts in all four categories: current state of fire safety installations, influence of establishment characteristics, application of regulations, and priority of actions. There was consensus among the experts over the necessity to improve the enforcement of regulations and also regarding the existence of an association between the hotel category (in Spain they are ranked using a 1 to 5 "star" rating system) and the level of fire safety; hotels with a higher category had higher levels of safety. There is a need to identify ways to apply fire safety standards to older hotels so that they comply with new regulations, to standardize regulations for different regions and countries, to improve the maintenance of installations and equipment, to increase the effectiveness of inspections conducted by government bodies, and to raise the general awareness of stakeholders involved in hotel fire prevention.

16 CFR 1203.3 - Referenced documents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Referenced documents. 1203.3 Section 1203.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY... international standard, it has become a consensus national standard because all recent major voluntary standards...

29 CFR 1910.11 - Scope and purpose.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.11... to safety or health are adopted by any incorporations by reference of standards prescribed elsewhere...

29 CFR 1910.11 - Scope and purpose.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.11... to safety or health are adopted by any incorporations by reference of standards prescribed elsewhere...

29 CFR 1910.12 - Construction work.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Adoption and Extension of Established Federal Standards § 1910.12... occupational safety and health standards under section 6 of the Act and shall apply, according to the...

The conception of fashion products for children: reflections on safety parameters.

PubMed

Prete, Lígia Gomes Pereira; Emidio, Lucimar de Fátima Bilmaia; Martins, Suzana Barreto

2012-01-01

The purpose of this study is to reflect on safety requirements for children's clothing, based on the standardization proposed by the ABNT (Technical Standardization Brazilian Association). Bibliographic research and case studies were considered on writing this work. We also discuss the importance of adding other safety requirements to the current standardization, as well as the increasing of the actual age range specified by the ABNT, following the children's clothing safety standardizations in Portugal and the United States, also stated here.

29 CFR 1910.309-1910.330 - [Reserved

Code of Federal Regulations, 2011 CFR

2011-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems §§ 1910.309-1910.330 [Reserved] Safety-Related Work Practices ...

29 CFR 1910.309-1910.330 - [Reserved

Code of Federal Regulations, 2012 CFR

2012-07-01

... Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS Electrical Design Safety Standards for Electrical Systems §§ 1910.309-1910.330 [Reserved] Safety-Related Work Practices ...

Occupational Health and Safety Management and Turnover Intention in the Ghanaian Mining Sector

PubMed Central

Amponsah-Tawiah, Kwesi; Ntow, Michael Akomeah Ofori; Mensah, Justice

2015-01-01

Background The mining industry is considered as one of the most dangerous and hazardous industries and the need for effective and efficient occupational health and safety management is critical to safeguard workers and the industry. Despite the dangers and hazards present in the mining industry, only few studies have focused on how occupational health and safety and turnover intentions in the mines. Method The study suing a cross-sectional survey design collected quantitative data from the 255 mine workers that were conveniently sampled from the Ghanaian mining industry. The data collection tools were standardized questionnaires that measured occupational health and safety management and turnover intentions. These scales were also pretested before their usage in actual data collection. Results The correlation coefficient showed that a negative relationship existed between dimensions of occupational health and safety management and turnover intention; safety leadership (r = −0.33, p < 0.01); supervision (r = −0.26, p < 0.01); safety facilities and equipment (r = −0.32, p < 0.01); safety procedure (r = −0.27, p < 0.01). Among these dimensions, safety leadership and safety facility were significant predictors of turnover intention, (β = −0.28, p < 0.01) and (β = −0.24, p < 0.01) respectively. The study also found that turnover intention of employees is heavily influenced by the commitment of safety leadership in ensuring the effective formulation of policies and supervision of occupational health and safety at the workplace. Conclusion The present study demonstrates that safety leadership is crucial in the administration of occupational health and safety and reducing turnover intention in organizations. PMID:27014486

Occupational Health and Safety Management and Turnover Intention in the Ghanaian Mining Sector.

PubMed

Amponsah-Tawiah, Kwesi; Ntow, Michael Akomeah Ofori; Mensah, Justice

2016-03-01

The mining industry is considered as one of the most dangerous and hazardous industries and the need for effective and efficient occupational health and safety management is critical to safeguard workers and the industry. Despite the dangers and hazards present in the mining industry, only few studies have focused on how occupational health and safety and turnover intentions in the mines. The study suing a cross-sectional survey design collected quantitative data from the 255 mine workers that were conveniently sampled from the Ghanaian mining industry. The data collection tools were standardized questionnaires that measured occupational health and safety management and turnover intentions. These scales were also pretested before their usage in actual data collection. The correlation coefficient showed that a negative relationship existed between dimensions of occupational health and safety management and turnover intention; safety leadership (r = -0.33, p < 0.01); supervision (r = -0.26, p < 0.01); safety facilities and equipment (r = -0.32, p < 0.01); safety procedure (r = -0.27, p < 0.01). Among these dimensions, safety leadership and safety facility were significant predictors of turnover intention, (β = -0.28, p < 0.01) and (β = -0.24, p < 0.01) respectively. The study also found that turnover intention of employees is heavily influenced by the commitment of safety leadership in ensuring the effective formulation of policies and supervision of occupational health and safety at the workplace. The present study demonstrates that safety leadership is crucial in the administration of occupational health and safety and reducing turnover intention in organizations.

Commercial Motor Vehicle Driver Obstructive Sleep Apnea Screening and Treatment in the United States: An Update and Recommendation Overview

PubMed Central

Colvin, Loretta J.; Collop, Nancy A.

2016-01-01

No regulatory mandate exists in the United States (U.S.) for comprehensive obstructive sleep apnea (OSA) risk assessment and stratification for commercial motor vehicle (CMV) drivers. Current Federal Motor Carrier Safety Administration (FMCSA) requirements are outdated and depend largely on subjective report, a less reliable strategy in an occupational setting. Without FMCSA standards, sleep specialists, occupational medical examiners and employers rely on a collection of medical consensus recommendations to establish standards of care. These recommendations advise OSA risk assessment through a combination of focused medical history, physical examination, questionnaires, and accident history, which increase OSA detection compared to current FMCSA standards. For those diagnosed with OSA, consensus-based risk stratification helps identify CMV drivers who may benefit from OSA treatment and establish minimum standards for assessing treatment efficacy and adherence. Unfortunately no consolidated recommendation exists; rather, publications span medical and governmental literature in a patchwork fashion that no longer fully reflect current practice due to subsequent advances in OSA diagnosis, treatment, and technology. Based on searches of medical literature, internet materials, and reference lists from existing publications, an overview and discussion of key published recommendations regarding OSA assessment and treatment in CMV operators is provided. Suggestions for incorporating these recommendations into clinical sleep medicine practice in the U.S. are presented. The challenge for sleep specialists is maintaining the delicate balance between recommendations impacting standard of care and associated medico-legal impact with stakeholder interests from medical, regulatory, industry and public perspectives while providing high quality and efficient care. Citation: Colvin LJ, Collop NA. Commercial motor vehicle driver obstructive sleep apnea screening and treatment in the United States: an update and recommendation overview. J Clin Sleep Med 2016;12(1):113–125. PMID:26094916

How accurate is accident data in road safety research? An application of vehicle black box data regarding pedestrian-to-taxi accidents in Korea.

PubMed

Chung, Younshik; Chang, IlJoon

2015-11-01

Recently, the introduction of vehicle black box systems or in-vehicle video event data recorders enables the driver to use the system to collect more accurate crash information such as location, time, and situation at the pre-crash and crash moment, which can be analyzed to find the crash causal factors more accurately. This study presents the vehicle black box system in brief and its application status in Korea. Based on the crash data obtained from the vehicle black box system, this study analyzes the accuracy of the crash data collected from existing road crash data recording method, which has been recorded by police officers based on accident parties' statements or eyewitness's account. The analysis results show that the crash data observed by the existing method have an average of 84.48m of spatial difference and standard deviation of 157.75m as well as average 29.05min of temporal error and standard deviation of 19.24min. Additionally, the average and standard deviation of crash speed errors were found to be 9.03km/h and 7.21km/h, respectively. Copyright © 2015 Elsevier Ltd. All rights reserved.

[Security aspects on the Internet].

PubMed

Seibel, R M; Kocher, K; Landsberg, P

2000-04-01

Is it possible to use the Internet as a secure media for transport of telemedicine? Which risks exist for routine use? In this article state of the art methods of security were analysed. Telemedicine in the Internet has severe risks, because patient data and hospital data of a secure Intranet can be manipulated by connecting it to the Web. Establishing of a firewall and the introduction of HPC (Health Professional Card) are minimizing the risk of un-authorized access to the hospital server. HPC allows good safety with digital signature and authentication of host and client of medical data. For secure e-mail PGP (Pretty Good Privacy) is easy to use as a standard protocol. Planning all activities exactly as well as following legal regulations are important requisites for reduction of safety risks in Internet.

NASA Software Safety Standard

NASA Technical Reports Server (NTRS)

Rosenberg, Linda

1997-01-01

If software is a critical element in a safety critical system, it is imperative to implement a systematic approach to software safety as an integral part of the overall system safety programs. The NASA-STD-8719.13A, "NASA Software Safety Standard", describes the activities necessary to ensure that safety is designed into software that is acquired or developed by NASA, and that safety is maintained throughout the software life cycle. A PDF version, is available on the WWW from Lewis. A Guidebook that will assist in the implementation of the requirements in the Safety Standard is under development at the Lewis Research Center (LeRC). After completion, it will also be available on the WWW from Lewis.

76 FR 72888 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-28

... pedestrian safety devices. 571.217 Bus emergency exits and window retention and release. 571.220 School bus... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 [Docket No. NHTSA-2011-0160] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor...

78 FR 76265 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-17

... Through 578, Except Parts 571 and 575 [Docket No. NHTSA-2013-0116] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety Administration... passenger cars, multipurpose passenger vehicles, trucks, buses, trailers, motorcycles, and motor vehicle...

75 FR 76692 - Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-09

..., 510, 511, 512, 520, 523, 525, 526, and 571 [Docket No. NHTSA-2010-0159] Federal Motor Vehicle Safety Standards; Small Business Impacts of Motor Vehicle Safety AGENCY: National Highway Traffic Safety... that specifically relate to passenger cars, multipurpose passenger vehicles, trucks, buses, trailers...

78 FR 2662 - Proposed Extension of Approval of Information Collection; Comment Request: Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-14

... Information Collection; Comment Request: Safety Standard for Cigarette Lighters AGENCY: Consumer Product... disposable and novelty cigarette lighters. This collection of information consists of testing and recordkeeping requirements in certification regulations implementing the Safety Standard for Cigarette Lighters...

76 FR 34890 - Track Safety Standards; Concrete Crossties

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-15

...-0007, Notice No. 3] RIN 2130-AC01 Track Safety Standards; Concrete Crossties AGENCY: Federal Railroad... effective concrete crossties, for rail fastening systems connected to concrete crossties, and for automated inspections of track constructed with concrete crossties. The Track Safety Standards were amended via final...

77 FR 52272 - Safety Standard for Play Yards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-29

... Standard for Play Yards AGENCY: Consumer Product Safety Commission. ACTION: Notice of proposed rulemaking... to amend the play yard mandatory standard. This proposed rule would address the hazards associated... Improvement Act of 2008 (CPSIA), also known as the ``Danny Keysar Child Product Safety Notification Act...

International legal regulation of impact of occupational injuries and diseases on agricultural workers' health.

PubMed

Pashkov, Vitalii M; Batyhina, Olena M; Trotska, Maryna V

Agricultural workers' health depends on many factors: working conditions, security arrangements, medicine, quality of drugs, the environment, etc. Occupational injuries and diseases are also among the factors that can negatively affect their health. To analyze provisions of the international legislation and scientific literature concerning existence of restrictions on impact of occupational injuries and diseases on agricultural workers' health. International acts, data of international organizations and conclusions of scientists have been examined and used in the study. The article also integrates information from scientific journals and monographs from a medical and legal point of view with scientific methods. This article is based on dialectical, comparative, analytic, synthetic and comprehensive research methods. Impact of occupational injuries and diseases on agricultural workers' health has been studied within the system approach, as well as analysis and synthesis. The level of occupational morbidity, traumatism and above all standard of agricultural workers' health depends on the way of occupational safety organization. Working conditions and safety in agricultural industry and therefore the appropriate standard of health remain unsatisfactory in many countries.

Administrative goals and safety standards for hazard control on forested recreation sites

Treesearch

Lee A. Paine

1973-01-01

For efficient control of tree hazard on recreation sites, a specific administrative goal must be selected. A safety standard designed to achieve the selected goal and a uniform hazard-rating procedure will then promote a consistent level of safety at an acceptable cost. Safety standards can be established with the aid of data for past years, and dollar evaluations are...

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

30 CFR 6.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... MSHA. Equivalent non-MSHA product safety standards. A non-MSHA product safety standard, or group of... PRODUCTS TESTING AND EVALUATION BY INDEPENDENT LABORATORIES AND NON-MSHA PRODUCT SAFETY STANDARDS § 6.2... manufactures or controls the assembly of a product and applies to MSHA for approval of that product. Approval...

Alternative Fuels Data Center: E85 Codes and Standards

Science.gov Websites

Development Equipment Options Equipment Installation Codes, Standards, & Safety Vehicles Laws & ; Incentives Ethanol Codes, Standards, and Safety The U.S. Environmental Protection Agency's (EPA) Office of -Gasoline Blends. The Occupational Safety and Health Administration (OSHA) regulates some fuel-dispensing

48 CFR 822.305 - Contract clause.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Hours and Safety Standards Act—nursing home care contract supplement, in solicitations and contracts for nursing home care when the FAR clause at 52.222-4, Contract Work Hours and Safety Standards Act—Overtime... PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Contract Work Hours and Safety Standards Act...

48 CFR 822.305 - Contract clause.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Hours and Safety Standards Act—nursing home care contract supplement, in solicitations and contracts for nursing home care when the FAR clause at 52.222-4, Contract Work Hours and Safety Standards Act—Overtime... PROGRAMS APPLICATION OF LABOR LAWS TO GOVERNMENT ACQUISITIONS Contract Work Hours and Safety Standards Act...

76 FR 55825 - Federal Motor Vehicle Safety Standards, Child Restraint Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

... [Docket No. NHTSA-2011-0139] RIN 2127-AJ44 Federal Motor Vehicle Safety Standards, Child Restraint Systems..., amends a provision in Federal Motor Vehicle Safety Standard No. 213, ``Child restraint systems,'' that... forces, accelerations, moments and deflections, which are crucial in evaluating vehicle occupant...

49 CFR Appendix C to Part 238 - Suspension System Safety Performance Standards

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Suspension System Safety Performance Standards C Appendix C to Part 238 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PASSENGER EQUIPMENT SAFETY STANDARDS Pt. 238, App. C...

Fragmentation of care threatens patient safety in peripheral vascular catheter management in acute care--a qualitative study.

PubMed

Castro-Sánchez, Enrique; Charani, Esmita; Drumright, Lydia N; Sevdalis, Nick; Shah, Nisha; Holmes, Alison H

2014-01-01

The use of peripheral vascular catheters (PVCs) is an extremely common and necessary clinical intervention, but inappropriate PVC care poses a major patient safety risk in terms of infection. Quality improvement initiatives have been proposed to reduce the likelihood of adverse events, but a lack of understanding about factors that influence behaviours of healthcare professionals limits the efficacy of such interventions. We undertook qualitative interviews with clinical staff from a large group of hospitals in order to understand influences on PVC care behaviors and subsequent patient safety. Ten doctors, ten clinical pharmacists, 18 nurses and one midwife at a National Health Service hospital group in London (United Kingdom) were interviewed between December 2010 and July 2011 using qualitative methods. Responses were analysed using a thematic framework. FOUR KEY THEMES EMERGED: 1) Fragmentation of management and care, demonstrated with a lack of general overview and insufficient knowledge about expected standards of care or responsibility of different professionals; 2) feelings of resentment and frustration as a result of tensions in the workplace, due to the ambiguity about professional responsibilities; 3) disregard for existing hospital policy due to perceptions of flaws in the evidence used to support it; and 4) low-risk perception for the impact of PVC use on patient safety. Fragmentation of practice resulted in ill-defined responsibilities and interdisciplinary resentment, which coupled with a generally low perception of risk of catheter use, appeared to result in lack of maintaining policy PVC standards which could reduced patient safety. Resolution of these issues through clearly defining handover practice, teaching interdisciplinary duties and increasing awareness of PVC risks could result in preventing thousands of BSIs and other PVC-related infections annually.

Evaluation of human response to blasting vibration from excavation of a large scale rock slope: A case study

NASA Astrophysics Data System (ADS)

Yan, Peng; Lu, Wenbo; Zhang, Jing; Zou, Yujun; Chen, Ming

2017-04-01

Ground vibration, as the most critical public hazard of blasting, has received much attention from the community. Many countries established national standards to suppress vibration impact on structures, but a world-accepted blasting vibration criterion on human safety is still missing. In order to evaluate human response to the vibration from blasting excavation of a large-scale rock slope in China, this study aims to suggest a revised criterion. The vibration frequency was introduced to improve the existing single-factor (peak particle velocity) standard recommended by the United States Bureau of Mines (USBM). The feasibility of the new criterion was checked based on field vibration monitoring and investigation of human reactions. Moreover, the air overpressure or blast effects on human beings have also been discussed. The result indicates that the entire zone of influence can be divided into three subzones: severe-annoyance, light-annoyance and perception zone according to the revised safety standard. Both the construction company and local residents have provided positive comments on this influence degree assessment, which indicates that the presented criterion is suitable for evaluating human response to nearby blasts. Nevertheless, this specific criterion needs more field tests and verifications before it can be

Society of Vascular and Interventional Neurology (SVIN) Stroke Interventional Laboratory Consensus (SILC) Criteria: A 7M Management Approach to Developing a Stroke Interventional Laboratory in the Era of Stroke Thrombectomy for Large Vessel Occlusions

PubMed Central

Shams, Tanzila; Zaidat, Osama; Yavagal, Dileep; Xavier, Andrew; Jovin, Tudor; Janardhan, Vallabh

2016-01-01

Brain attack care is rapidly evolving with cutting-edge stroke interventions similar to the growth of heart attack care with cardiac interventions in the last two decades. As the field of stroke intervention is growing exponentially globally, there is clearly an unmet need to standardize stroke interventional laboratories for safe, effective, and timely stroke care. Towards this goal, the Society of Vascular and Interventional Neurology (SVIN) Writing Committee has developed the Stroke Interventional Laboratory Consensus (SILC) criteria using a 7M management approach for the development and standardization of each stroke interventional laboratory within stroke centers. The SILC criteria include: (1) manpower: personnel including roles of medical and administrative directors, attending physicians, fellows, physician extenders, and all the key stakeholders in the stroke chain of survival; (2) machines: resources needed in terms of physical facilities, and angiography equipment; (3) materials: medical device inventory, medications, and angiography supplies; (4) methods: standardized protocols for stroke workflow optimization; (5) metrics (volume): existing credentialing criteria for facilities and stroke interventionalists; (6) metrics (quality): benchmarks for quality assurance; (7) metrics (safety): radiation and procedural safety practices. PMID:27610118

Standards--the common element in providing the safety, quality and performance of the medical practice.

PubMed

Greabu, Maria

2009-01-01

Knowing and applying standards is an opportunity of the years 2007-2008 in any kind of field where a successful activity is intended and this assures a certain way towards competence and quality. The most recent German studies highlighted, to the surprise of the specialists, that standardization holds the second place, after the material means, in the row of the elements considered to be decisive for the success of a business. The existence of standards and the concern for their implementation in the activity provides a high technical and quality level of the products/services offered to the clients and the increase in the level of competence of the personnel, who will be able to cope with all the challenges. This need comes from the process of Romania's accession to the European Union. There are a lot of reasons why standards represent a fundamental part of our daily life. Practically, we are surrounded by standards. Everything is "working" well and it is efficient if the standards used as a base for manufacturing "things" have been correctly developed and applied. Standards open communication channels and commercial channels, promote the understanding of technical products, the compatibility of products and services, facilitate mass production and, most importantly, they are the necessary base for the achievement of the objectives in the fields of health and safety and a better quality of life. The transition towards the global market needs an instrument for the removal of the barriers to the application of the latest discoveries in the field of medical instruments, materials and manual labor. Each medical device, equipment and material used in the Dental and General Medicine is standardized, in fact that leads to their better knowing and provides controllable treatment for manual labor with predictable and repeatable results. This presentation intends to make a survey of some general aspects on standardization as well as a review of the standards in the medical area.

The Safety of Available Immunotherapy for the Treatment of Glioblastoma

PubMed Central

Farber, S. Harrison; Elsamadicy, Aladine A.; Atik, Fatih; Suryadevara, Carter M.; Chongsathidkiet, Pakawat; Fecci, Peter E.; Sampson, John H.

2017-01-01

Introduction Glioblastoma (GBM) is the most common malignant primary brain tumor in adults. Current standard of care involves maximal surgical resection combined with adjuvant chemoradiation. Growing support exists for a role of immunotherapy in treating these tumors with the goal of targeted cytotoxicity. Here we review data on the safety for current immunotherapies being tested in GBM. Areas covered Safety data from published clinical trials, including ongoing clinical trials were reviewed. Immunotherapeutic classes currently under investigation in GBM include various vaccination strategies, adoptive T cell immunotherapy, immune checkpoint blockade, monoclonal antibodies, and cytokine therapies. Trials include children, adolescents, and adults with either primary or recurrent GBM. Expert commentary Based on the reviewed clinical trials, the current immunotherapies targeting GBM are safe and well-tolerated with minimal toxicities which should be noted. However, the gains in patient survival have been modest. A safe and well-tolerated combinatory immunotherapeutic approach may be essential for optimal efficacy towards GBM. PMID:27989218

Database Design to Ensure Anonymous Study of Medical Errors: A Report from the ASIPS collaborative

PubMed Central

Pace, Wilson D.; Staton, Elizabeth W.; Higgins, Gregory S.; Main, Deborah S.; West, David R.; Harris, Daniel M.

2003-01-01

Medical error reporting systems are important information sources for designing strategies to improve the safety of health care. Applied Strategies for Improving Patient Safety (ASIPS) is a multi-institutional, practice-based research project that collects and analyzes data on primary care medical errors and develops interventions to reduce error. The voluntary ASIPS Patient Safety Reporting System captures anonymous and confidential reports of medical errors. Confidential reports, which are quickly de-identified, provide better detail than do anonymous reports; however, concerns exist about the confidentiality of those reports should the database be subject to legal discovery or other security breaches. Standard database elements, for example, serial ID numbers, date/time stamps, and backups, could enable an outsider to link an ASIPS report to a specific medical error. The authors present the design and implementation of a database and administrative system that reduce this risk, facilitate research, and maintain near anonymity of the events, practices, and clinicians. PMID:12925548

77 FR 43811 - Submission for OMB Review; Comment Request-Safety Standards for Full-Size Baby Cribs and Non-Full...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... CONSUMER PRODUCT SAFETY COMMISSION Submission for OMB Review; Comment Request--Safety Standards for Full-Size Baby Cribs and Non-Full-Size Baby Cribs; Compliance Form AGENCY: Consumer Product Safety Commission. ACTION: Notice. SUMMARY: The Consumer Product Safety Commission (CPSC or Commission) announces...

A review of national policies and strategies to improve quality of health care and patient safety: a case study from Lebanon and Jordan.

PubMed

El-Jardali, Fadi; Fadlallah, Racha

2017-08-16

Improving quality of care and patient safety practices can strengthen health care delivery systems, improve health sector performance, and accelerate attainment of health-related Sustainability Development Goals. Although quality improvement is now prominent on the health policy agendas of governments in low- and middle-income countries (LMICs), including countries of the Eastern Mediterranean Region (EMR), progress to date has not been optimal. The objective of this study is to comprehensively review existing quality improvement and patient safety policies and strategies in two selected countries of the EMR (Lebanon and Jordan) to determine the extent to which these have been institutionalized within existing health systems. We used a mixed methods approach that combined documentation review, stakeholder surveys and key informant interviews. Existing quality improvement and patient safety initiatives were assessed across five components of an analytical framework for assessing health care quality and patient safety: health systems context; national policies and legislation; organizations and institutions; methods, techniques and tools; and health care infrastructure and resources. Both Lebanon and Jordan have made important progress in terms of increased attention to quality and accreditation in national health plans and strategies, licensing requirements for health care professionals and organizations (albeit to varying extents), and investments in health information systems. A key deficiency in both countries is the absence of an explicit national policy for quality improvement and patient safety across the health system. Instead, there is a spread of several (disjointed) pieces of legal measures and national plans leading to fragmentation and lack of clear articulation of responsibilities across the entire continuum of care. Moreover, both countries lack national sets of standardized and applicable quality indicators for performance measurement and benchmarking. Importantly, incentive systems that link contractual agreement, regulations, accreditation, and performance indicators are underutilized in Lebanon and absent in Jordan. At the healthcare organizational level, there is a need to instill a culture of continuous quality improvement and promote professional training in quality improvement and patient safety. Study findings highlight the importance of aligning policies, organizations, methods, capacities and resources in order to institutionalize quality improvement and patient safety practices in health systems. Gaps and dysfunctions identified can help inform national deliberations and dialogues among key stakeholders in each study country. Findings can also inform future quality improvement efforts in the EMR and beyond, with a particular emphasis on LMICs.

16 CFR 1750.7 - Provision for changes in the standard.

Code of Federal Regulations, 2014 CFR

2014-01-01

....7 Section 1750.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR DEVICES TO PERMIT THE OPENING OF HOUSEHOLD REFRIGERATOR DOORS FROM THE INSIDE § 1750... wishing to propose a change in this standard shall submit to the Secretary, Consumer Product Safety...

16 CFR 1750.7 - Provision for changes in the standard.

Code of Federal Regulations, 2012 CFR

2012-01-01

....7 Section 1750.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR DEVICES TO PERMIT THE OPENING OF HOUSEHOLD REFRIGERATOR DOORS FROM THE INSIDE § 1750... wishing to propose a change in this standard shall submit to the Secretary, Consumer Product Safety...

16 CFR 1750.7 - Provision for changes in the standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

....7 Section 1750.7 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION REFRIGERATOR SAFETY ACT REGULATIONS STANDARD FOR DEVICES TO PERMIT THE OPENING OF HOUSEHOLD REFRIGERATOR DOORS FROM THE INSIDE § 1750... wishing to propose a change in this standard shall submit to the Secretary, Consumer Product Safety...

75 FR 52059 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-24

... with certain requirements of 49 CFR part 232 -- Brake System Safety Standards for Freight and Other Non-Passenger Trains and Equipment; End-of Train Devices and CFR Part 215--Railroad Freight Car Safety Standards... requirements of its safety standards. The individual petition is described below, including the party seeking...

30 CFR Appendix I to Subpart C of... - National Consensus Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... Subpart C of Part 56 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Fire... Standards Mine operators seeking further information in the area of fire prevention and control may consult...

Crashworthiness of Small Poststandard School Buses: Safety Study.

ERIC Educational Resources Information Center

National Transportation Safety Board (DOT), Washington, DC.

In 1977, a series of Federal Motor Vehicle Safety Standards (FMVSS) for school buses became effective, mandating different performance standards for school buses compared to other buses. Because data on the crash performance of school buses built to these standards were lacking, the National Transportation Safety Board conducted a series of…

78 FR 14015 - Medical Devices; Exemption From Premarket Notification; Class II Devices; Powered Patient Transport

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-04

... for Safety--Collateral Standard: Electromagnetic Compatibility--Requirements and Tests,'' and ASME A18.1 ``Safety Standard for Platform Lifts and Stairway Chair Lifts'') must validate electromagnetic...: Electromagnetic Compatibility--Requirements and Tests,'' and ASME A18.1 ``Safety Standard for Platform Lifts and...

75 FR 15620 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... fully develop improved brake systems and also to ensure vehicle control and stability while braking... [Docket No. NHTSA 2009-0175] RIN 2127-AK62 Federal Motor Vehicle Safety Standards; Air Brake Systems... Federal motor vehicle safety standard for air brake systems by requiring substantial improvements in...

75 FR 54223 - Petition for Waiver of Compliance

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-03

... requirements of 49 CFR Part 232--Brake System Safety Standards for Freight and Other Non-Passenger Trains and Equipment; End-of Train Devices, CFR Part 229--Railroad Locomotive Safety Standards, and CFR Part 215--Railroad Freight Car Safety Standards. Specifically, UP seeks relief to permit trains received at the U.S...

77 FR 54836 - Federal Motor Vehicle Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... DEPARTMENT OF TRANSPORTATION National Highway Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards CFR Correction 0 In Title 49 of the Code of Federal Regulations... read as follows: Sec. 571.119 Standard No. 119; New pneumatic tires for motor vehicles with a GVWR of...

Improving compliance with Occupational Safety and Health Administration standards.

PubMed

Cuming, Richard; Rocco, Tonette S; McEachern, Adriana G

2008-02-01

Health care facilities can be dangerous places. The mission of the Occupational Safety and Health Administration (OSHA) is to improve the safety of the American workplace by developing and implementing standards that prevent occupational injury, illness, and death. Perioperative services are performed in environments where exposure to bloodborne pathogens is a daily occurrence, making implementation and compliance with OSHA standards very important. Employees and employers must remain current with workplace safety requirements, including use of personal protective equipment. This article presents implications of the OSHA standards for employers, educators, and employees.

A literature review of safety culture.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cole, Kerstan Suzanne; Stevens-Adams, Susan Marie; Wenner, Caren A.

2013-03-01

Workplace safety has been historically neglected by organizations in order to enhance profitability. Over the past 30 years, safety concerns and attention to safety have increased due to a series of disastrous events occurring across many different industries (e.g., Chernobyl, Upper Big-Branch Mine, Davis-Besse etc.). Many organizations have focused on promoting a healthy safety culture as a way to understand past incidents, and to prevent future disasters. There is an extensive academic literature devoted to safety culture, and the Department of Energy has also published a significant number of documents related to safety culture. The purpose of the current endeavormore » was to conduct a review of the safety culture literature in order to understand definitions, methodologies, models, and successful interventions for improving safety culture. After reviewing the literature, we observed four emerging themes. First, it was apparent that although safety culture is a valuable construct, it has some inherent weaknesses. For example, there is no common definition of safety culture and no standard way for assessing the construct. Second, it is apparent that researchers know how to measure particular components of safety culture, with specific focus on individual and organizational factors. Such existing methodologies can be leveraged for future assessments. Third, based on the published literature, the relationship between safety culture and performance is tenuous at best. There are few empirical studies that examine the relationship between safety culture and safety performance metrics. Further, most of these studies do not include a description of the implementation of interventions to improve safety culture, or do not measure the effect of these interventions on safety culture or performance. Fourth, safety culture is best viewed as a dynamic, multi-faceted overall system composed of individual, engineered and organizational models. By addressing all three components of safety culture, organizations have a better chance of understanding, evaluating, and making positive changes towards safety within their own organization.« less

Defining the Ideal Lumbar Total Disc Replacement Patient and Standard of Care.

PubMed

Gornet, Matthew; Buttermann, Glenn; Guyer, Richard; Yue, James; Ferko, Nicole; Hollmann, Sarah

2017-12-15

: Lumbar total disc replacement, now in use since 2004, was determined by the panel to be a standard of care for the treatment of symptomatic single-level lumbar degenerative disc disease in the active patient subpopulation as outlined by the investigational device exemption study criteria. The large body of evidence supporting this statement, including surgeons' experiences, was presented and discussed. Consensus statements focusing on decision-making criteria reflected that efficacy, long-term safety, clinical outcomes with validated measures, and cost-effectiveness should form the basis of decision-making by payers. Diagnostic challenges with lumbar degenerative disc disease patients were discussed among the panel, and it was concluded that although variably used among surgeons, reliable tools exist to appropriately diagnose discogenic back pain.

16 CFR 1213.7 - Findings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR ENTRAPMENT HAZARDS IN BUNK BEDS § 1213.7 Findings. The Consumer Product Safety Act requires that the... there will be substantial compliance with such voluntary standard. (d) The benefits expected from the...

16 CFR 1210.11 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SAFETY STANDARD FOR CIGARETTE LIGHTERS Certification Requirements § 1210.11 General. Section 14(a) of the Consumer Product... product that is subject to a consumer product safety standard and that is distributed in commerce to issue...

29 CFR 1952.320 - Description of the plan as initially approved.

Code of Federal Regulations, 2013 CFR

2013-07-01

... specifically designed to cover the following areas: general industrial safety, construction safety, first aid... Section 1952.320 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... structure, the Occupational Safety Standards Commission has the responsibility to adopt standards and...

29 CFR 1952.320 - Description of the plan as initially approved.

Code of Federal Regulations, 2012 CFR

2012-07-01

... specifically designed to cover the following areas: general industrial safety, construction safety, first aid... Section 1952.320 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... structure, the Occupational Safety Standards Commission has the responsibility to adopt standards and...

29 CFR 1952.320 - Description of the plan as initially approved.

Code of Federal Regulations, 2014 CFR

2014-07-01

... specifically designed to cover the following areas: general industrial safety, construction safety, first aid... Section 1952.320 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... structure, the Occupational Safety Standards Commission has the responsibility to adopt standards and...

[Future trend medical apps. From the apps store directly into medical practice?].

PubMed

Gehring, H; Pramann, O; Imhoff, M; Albrecht, U-V

2014-12-01

In day to day medical care, patients, nursing staff and doctors currently face a bewildering and rapidly growing number of health-related apps running on various "smart" devices and there are also uncountable possibilities for the use of such technology. Concerning regulation, a risk-based approach is applied for development and use (including safety and security considerations) of medical and health-related apps. Considering safety-related issues as well as organizational matters, this is a sensible approach but requires honest self-assessment as well as a high degree of responsibility, networking and good quality management by all those involved. This cannot be taken for granted. Apart from regulatory aspects it is important to not only consider what is reasonable, helpful or profitable. Quality aspects, safety matters, data protection and privacy as well as liability issues must also be considered but are often not adequately respected. If software quality is compromised, this endangers patient safety as well as data protection, privacy and data integrity. This can for example result in unwanted advertising or unauthorized access to the stored data by third parties; therefore, local, regional and international regulatory measures need to be applied in order to ensure safe use of medical apps in all possible areas, including the operating room (OR) with its highly specialized demands. Lawmakers need to include impulses from all stakeholders in their considerations and this should include input from existing private initiatives that already deal with the use and evaluation of apps in a medical context. Of course, this process needs to respect pre-existing national, European as well as international (harmonized) standards.

Fault displacement hazard assessment for nuclear installations based on IAEA safety standards

NASA Astrophysics Data System (ADS)

Fukushima, Y.

2016-12-01

In the IAEA Safety NS-R-3, surface fault displacement hazard assessment (FDHA) is required for the siting of nuclear installations. If any capable faults exist in the candidate site, IAEA recommends the consideration of alternative sites. However, due to the progress in palaeoseismological investigations, capable faults may be found in existing site. In such a case, IAEA recommends to evaluate the safety using probabilistic FDHA (PFDHA), which is an empirical approach based on still quite limited database. Therefore a basic and crucial improvement is to increase the database. In 2015, IAEA produced a TecDoc-1767 on Palaeoseismology as a reference for the identification of capable faults. Another IAEA Safety Report 85 on ground motion simulation based on fault rupture modelling provides an annex introducing recent PFDHAs and fault displacement simulation methodologies. The IAEA expanded the project of FDHA for the probabilistic approach and the physics based fault rupture modelling. The first approach needs a refinement of the empirical methods by building a world wide database, and the second approach needs to shift from kinematic to the dynamic scheme. Both approaches can complement each other, since simulated displacement can fill the gap of a sparse database and geological observations can be useful to calibrate the simulations. The IAEA already supported a workshop in October 2015 to discuss the existing databases with the aim of creating a common worldwide database. A consensus of a unified database was reached. The next milestone is to fill the database with as many fault rupture data sets as possible. Another IAEA work group had a WS in November 2015 to discuss the state-of-the-art PFDHA as well as simulation methodologies. Two groups jointed a consultancy meeting in February 2016, shared information, identified issues, discussed goals and outputs, and scheduled future meetings. Now we may aim at coordinating activities for the whole FDHA tasks jointly.

OSHA Laboratory Standard: Driving Force for Laboratory Safety!

ERIC Educational Resources Information Center

Roy, Kenneth R.

2000-01-01

Discusses the Occupational Safety and Health Administration's (OSHA's) Laboratory Safety Standards as the major driving force in establishing and maintaining a safe working environment for teachers and students. (Author)

30 CFR 57.22002 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Definitions. 57.22002 Section 57.22002 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in...

16 CFR 1115.8 - Compliance with product safety standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... applicable mandatory consumer product safety standards and to report to the Commission any products which do.... 1115.8 Section 1115.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION CONSUMER PRODUCT SAFETY ACT REGULATIONS SUBSTANTIAL PRODUCT HAZARD REPORTS General Interpretation § 1115.8 Compliance with...

76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials... for natural gas pipelines and for hazardous liquid pipelines. Both committees were established under...

78 FR 40443 - Submission for OMB Review; Comment Request-Recordkeeping Requirements Under the Safety Standard...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-05

... Request--Recordkeeping Requirements Under the Safety Standard for Infant Walkers AGENCY: Consumer Product... for infant walkers, 16 CFR part 1216. No comments were received in response to that notice. Therefore... has been incorporated by reference in the safety standard for infant walkers, 16 CFR part 1216...

75 FR 21567 - Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-26

... Federal Motor Vehicle Safety Standard No. 108; Lamp, Reflective Devices and Associated Equipment; Denial... Motor Vehicle Safety Standard (FMVSS) No. 108; Lamps, reflective devices, and associated equipment... physical filaments in the lamp. Specifically, BMW requested that paragraph S10.17.1.1.2 \\4\\ of the...

75 FR 6123 - Federal Motor Vehicle Safety Standards; Occupant Crash Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-08

... motor vehicle safety standard is in effect under this chapter, a State or a political subdivision of a... [Docket No. NHTSA-2009-0156] RIN 2127-AK57 Federal Motor Vehicle Safety Standards; Occupant Crash...'s response to petitions for reconsideration of a November 12, 2008 final rule that amended the child...

Radiation safety of crew and passengers of air transportation in civil aviation. Provisional standards

NASA Technical Reports Server (NTRS)

Aksenov, A. F.; Burnazyan, A. I.

1985-01-01

The purpose and application of the provisional standards for radiation safety of crew and passengers in civil aviation are given. The radiation effect of cosmic radiation in flight on civil aviation air transport is described. Standard levels of radiation and conditions of radiation safety are discussed.

76 FR 44829 - Federal Motor Vehicle Safety Standards; Air Brake Systems

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-27

... [Docket No. NHTSA-2009-0175] RIN 2127-AK84 Federal Motor Vehicle Safety Standards; Air Brake Systems... final rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... July 27, 2009, NHTSA published a final rule in the Federal Register amending Federal Motor Vehicle...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2013 CFR

2013-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2013-10-01 2013-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2014 CFR

2014-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2014-10-01 2014-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2012 CFR

2012-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2012-10-01 2012-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

49 CFR 231.35 - Procedure for modification of an approved industry safety appliance standard for new railcar...

Code of Federal Regulations, 2011 CFR

2011-10-01

... industry safety appliance standard for new construction of railroad cars, locomotives, tenders, or other... 49 Transportation 4 2011-10-01 2011-10-01 false Procedure for modification of an approved industry... TRANSPORTATION RAILROAD SAFETY APPLIANCE STANDARDS § 231.35 Procedure for modification of an approved industry...

34 CFR 75.609 - Comply with safety and health standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 34 Education 1 2014-07-01 2014-07-01 false Comply with safety and health standards. 75.609 Section 75.609 Education Office of the Secretary, Department of Education DIRECT GRANT PROGRAMS What Conditions Must Be Met by a Grantee? Construction § 75.609 Comply with safety and health standards. In...

Hospital ventilation standards and energy conservation: a summary of the literature with conclusions and recommendations. Final report, FY 78

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hollowell, C.; Rosenfeld, A.

1978-09-01

This research examines the basis of current hospital HVAC standards and determines if they can be relaxed on criteria that do not compromise the health, safety, and comfort of patients and staff and has acceptance of the health care community. Chapter 2 summarizes existing standards in use throughout the United States governing hospital ventilation systems and the thermal environment. Chapter 3 explores the role of air in hospital-acquired infections. Chapter 4 explores the realm of indoor air quality within the hospital. Chapter 5 contains a discussion concerning the influence of thermal factors on patient comfort. Chapter 6 discusses the hospitalmore » odor problem with regards to ventilation rates. The final chapter includes conclusions and recommendations developed from the literature review and from a small working conference sponsored by the University of Minnesota School of Public Health.« less

30 CFR 57.22102 - Smoking (I-C mines).

Code of Federal Regulations, 2010 CFR

2010-07-01

... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Safety Standards for Methane in Metal and Nonmetal Mines Fire Prevention and Control § 57.22102 Smoking (I-C mines). (a...

78 FR 14592 - Proposed Extension of Existing Information Collection; Emergency Mine Evacuation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... DEPARTMENT OF LABOR Mine Safety and Health Administration [OMB Control No. 1219-0141] Proposed Extension of Existing Information Collection; Emergency Mine Evacuation AGENCY: Mine Safety and Health... requirements on respondents can be properly assessed. Currently, the Mine Safety and Health Administration is...