Science.gov

Sample records for expandable tubular fixing

  1. Expandable tubulars for use in geologic structures

    DOEpatents

    Spray, Jeffery A.; Svedeman, Steven; Walter, David; Mckeighan, Peter; Siebanaler, Shane; Dewhurst, Peter; Hobson, Steven; Foss, Doug; Wirz, Holger; Sharpe, Aaron; Apostal, Michael

    2014-08-12

    An expandable tubular includes a plurality of leaves formed from sheet material that have curved surfaces. The leaves extend around a portion or fully around the diameter of the tubular structure. Some of the adjacent leaves of the tubular are coupled together. The tubular is compressed to a smaller diameter so that it can be inserted through previously deployed tubular assemblies. Once the tubular is properly positioned, it is deployed and coupled or not coupled to a previously deployed tubular assembly. The tubular is useful for all types of wells and boreholes.

  2. Advanced Monobore Concept, Development of CFEX Self-Expanding Tubular Technology

    SciTech Connect

    Jeff Spray

    2007-09-30

    The Advanced Monobore Concept--CFEX{copyright} Self-Expanding Tubular Technology Development was a successfully executed fundamental research through field demonstration project. This final report is presented as a progression, according to basic technology development steps. For this project, the research and development steps used were: concept development, engineering analysis, manufacturing, testing, demonstration, and technology transfer. The CFEX{copyright} Technology Development--Advanced Monobore Concept Project successfully completed all of the steps for technology development, covering fundamental research, conceptual development, engineering design, advanced-level prototype construction, mechanical testing, and downhole demonstration. Within an approximately two year period, a partially defined, broad concept was evolved into a substantial new technological area for drilling and production engineering applicable a variety of extractive industries--which was also successfully demonstrated in a test well. The demonstration achievement included an actual mono-diameter placement of two self-expanding tubulars. The fundamental result is that an economical and technically proficient means of casing any size of drilling or production well or borehole is indicated as feasible based on the results of the project. Highlighted major accomplishments during the project's Concept, Engineering, Manufacturing, Demonstration, and Technology Transfer phases, are given.

  3. Expanded plug method for developing circumferential mechanical properties of tubular materials

    DOEpatents

    Hendrich, William Ray; McAfee, Wallace Jefferson; Luttrell, Claire Roberta

    2006-11-28

    A method for determining the circumferential properties of a tubular product, especially nuclear fuel cladding, utilizes compression of a polymeric plug within the tubular product to determine strain stress, yield stress and other properties. The process is especially useful in the determination of aging properties such as fuel rod embrittlement after long burn-down.

  4. Technical means for expanding the fixed-satellite service

    NASA Astrophysics Data System (ADS)

    Withers, D. J.

    1985-08-01

    In connection with the rapidly growing use of the geostationary satellite orbit (GSO) for the fixed-satellite service (FSS), there is widespread concern that the medium may become congested. In order to ensure that each country's access to the radio spectrum from the GSO is adequate in capacity, there is a need for progress in two broad areas of concern to the International Telecommunication Union (ITU). A general improvement is required in some of the characteristics of FSS satellite networks, and there must be improvements in the technical means which are employed for managing the use of the GSO by the FSS. A number of aspects regarding these two areas are discussed in a report from a meeting of the Interim Working Party 4/1 (IWP 4/1). The present article provides a brief review of four of these aspects. Attention is given to satellite antenna radiation patterns, earth station antenna side-lobe response, frequency coordination of FSS networks, and flexibility in the positioning of satellites.

  5. Bradyrhizobium japonicum NnrR, a Denitrification Regulator, Expands the FixLJ-FixK2 Regulatory Cascade

    PubMed Central

    Mesa, Socorro; Bedmar, Eulogio J.; Chanfon, Astrid; Hennecke, Hauke; Fischer, Hans-Martin

    2003-01-01

    In Bradyrhizobium japonicum, a gene named nnrR was identified which encodes a protein with high similarity to FNR/CRP-type transcriptional regulators. Mutant strains carrying an nnrR null mutation were unable to grow anaerobically in the presence of nitrate or nitrite, and they lacked both nitrate and nitrite reductase activities. Anaerobic activation of an nnrR′-′lacZ fusion required FixLJ and FixK2. In turn, N oxide-mediated induction of nir and nor genes encoding nitrite and nitric oxide reductase, respectively, depended on NnrR. Thus, NnrR expands the FixLJ-FixK2 regulatory cascade by an additional control level which integrates the N oxide signal required for maximal induction of the denitrification genes. PMID:12813094

  6. Bradyrhizobium japonicum NnrR, a denitrification regulator, expands the FixLJ-FixK2 regulatory cascade.

    PubMed

    Mesa, Socorro; Bedmar, Eulogio J; Chanfon, Astrid; Hennecke, Hauke; Fischer, Hans-Martin

    2003-07-01

    In Bradyrhizobium japonicum, a gene named nnrR was identified which encodes a protein with high similarity to FNR/CRP-type transcriptional regulators. Mutant strains carrying an nnrR null mutation were unable to grow anaerobically in the presence of nitrate or nitrite, and they lacked both nitrate and nitrite reductase activities. Anaerobic activation of an nnrR'-'lacZ fusion required FixLJ and FixK(2). In turn, N oxide-mediated induction of nir and nor genes encoding nitrite and nitric oxide reductase, respectively, depended on NnrR. Thus, NnrR expands the FixLJ-FixK(2) regulatory cascade by an additional control level which integrates the N oxide signal required for maximal induction of the denitrification genes.

  7. Strangeness condensation by expanding about the fixed point of the Harada-Yamawaki vector manifestation.

    PubMed

    Brown, G E; Lee, Chang-Hwan; Park, Hong-Jo; Rho, Mannque

    2006-02-17

    Building on, and extending, the result of a higher-order in-medium chiral perturbation theory combined with renormalization group arguments and a variety of observations of the vector manifestation of Harada-Yamawaki hidden local symmetry theory, we obtain a surprisingly simple description of kaon condensation by fluctuating around the "vector manifestation" fixed point identified to be the chiral restoration point. Our development establishes that strangeness condensation takes place at approximately 3n0 where n0 is nuclear matter density. This result depends only on the renormalization-group (RG) behavior of the vector interactions, other effects involved in fluctuating about the bare vacuum in so many previous calculations being irrelevant in the RG about the fixed point. Our results have major effects on the collapse of neutron stars into black holes.

  8. Fixed-bed column study for Cu2+ removal from solution using expanding rice husk.

    PubMed

    Luo, Xuegang; Deng, Zaifang; Lin, Xiaoyan; Zhang, Chi

    2011-03-15

    This paper deals with removal of copper ions from solution by raw rice husk (RRH) and expanding rice husk (ERH). Different column design parameters like bed depth, flow rate and initial copper concentration were investigated. It was found that the equilibrium uptake (q(eq(exp))) of the ERH and RRH increased with increase in initial copper concentration but decreased with increase in flow rate and bed depth, respectively. The higher adsorption capacity and longer breakthrough time were observed for ERH in comparison with RRH, under the same conditions. Compared to coconut-shell activated carbon (C-AC), ERH was also found more effective in removing Cu(2+). 0.01 mol L(-1) HCl solution was used for desorption of column which was prior to absorb copper ion, and 0.01 mol L(-1) NaOH solution was used for re-activation. Column regeneration and reuse studies were conducted for adsorption-desorption cycle.

  9. Comparison of oral health-related quality of life of patients treated by palatal expanders with patients treated by fixed orthodontic appliances

    PubMed Central

    Alghamdi, Mariana A; Farsi, Nada J; Hassan, Ali H

    2017-01-01

    Introduction and purpose Wearing orthodontic appliances may negatively affect a patient’s oral health-related quality of life (OHRQoL) physiologically, psychologically, and socially. Few studies have assessed the effect of palatal expanders on OHRQoL. The aim of this study was to evaluate the impact of palatal expanders on OHRQoL and to compare it with that of fixed orthodontic appliances. Materials and methods All adolescent and adult orthodontic patients who were undergoing treatment with fixed appliances or palatal expanders between July 2015 and January 2016 in King Abdulaziz University Orthodontc Dental Clinics, were recruited (n=399). The OHRQoL of each participant was assessed using the shortened Arabic version of the Oral Health Impact Profile-14 questionnaire. OHRQoL was compared between users of fixed appliances and users of palatal expanders; it was also compared after stratifying the patients by gender. Chi-squared and Fisher’s exact tests were used, as indicated. Results Palatal expanders had significantly greater negative effects on chewing ability (P≤0.01) and pronunciation (P=0.048). However, fixed orthodontic appliances had significantly greater negative impacts on mouth aching (P=0.003), difficulty in relaxing (P=0.01), irritability (P=0.001), and embarrassment (P≤0.01). Conclusion Palatal expanders had a significantly greater negative impact on some aspects of OHRQoL when compared with fixed orthodontic appliances in adolescents and young adults. PMID:28408807

  10. Comparison of oral health-related quality of life of patients treated by palatal expanders with patients treated by fixed orthodontic appliances.

    PubMed

    Alghamdi, Mariana A; Farsi, Nada J; Hassan, Ali H

    2017-01-01

    Wearing orthodontic appliances may negatively affect a patient's oral health-related quality of life (OHRQoL) physiologically, psychologically, and socially. Few studies have assessed the effect of palatal expanders on OHRQoL. The aim of this study was to evaluate the impact of palatal expanders on OHRQoL and to compare it with that of fixed orthodontic appliances. All adolescent and adult orthodontic patients who were undergoing treatment with fixed appliances or palatal expanders between July 2015 and January 2016 in King Abdulaziz University Orthodontc Dental Clinics, were recruited (n=399). The OHRQoL of each participant was assessed using the shortened Arabic version of the Oral Health Impact Profile-14 questionnaire. OHRQoL was compared between users of fixed appliances and users of palatal expanders; it was also compared after stratifying the patients by gender. Chi-squared and Fisher's exact tests were used, as indicated. Palatal expanders had significantly greater negative effects on chewing ability (P≤0.01) and pronunciation (P=0.048). However, fixed orthodontic appliances had significantly greater negative impacts on mouth aching (P=0.003), difficulty in relaxing (P=0.01), irritability (P=0.001), and embarrassment (P≤0.01). Palatal expanders had a significantly greater negative impact on some aspects of OHRQoL when compared with fixed orthodontic appliances in adolescents and young adults.

  11. Papillary tubular adenoma with marked tubular vacuolization.

    PubMed

    Hattori, N; Imakado, S; Kikuchi, K; Murakami, T; Furue, M

    1997-12-01

    We report a case of papillary tubular adenoma, arising on the knee joint. The overall histologic structure of the tumor is consistent with that of papillary tubular adenoma with slight interluminal papillary changes, but most of the tumor cells present vacuolization outlined by carcinoembryonic antigen staining, suggesting that this adenoma may have resulted from microlumen formation. This is, to our knowledge, the first reported case of a papillary tubular adenoma with marked tubular vacuolization.

  12. Tubular inverse opal scaffolds for biomimetic vessels

    NASA Astrophysics Data System (ADS)

    Zhao, Ze; Wang, Jie; Lu, Jie; Yu, Yunru; Fu, Fanfan; Wang, Huan; Liu, Yuxiao; Zhao, Yuanjin; Gu, Zhongze

    2016-07-01

    There is a clinical need for tissue-engineered blood vessels that can be used to replace or bypass damaged arteries. The success of such grafts depends strongly on their ability to mimic native arteries; however, currently available artificial vessels are restricted by their complex processing, controversial integrity, or uncontrollable cell location and orientation. Here, we present new tubular scaffolds with specific surface microstructures for structural vessel mimicry. The tubular scaffolds are fabricated by rotationally expanding three-dimensional tubular inverse opals that are replicated from colloidal crystal templates in capillaries. Because of the ordered porous structure of the inverse opals, the expanded tubular scaffolds are imparted with circumferentially oriented elliptical pattern microstructures on their surfaces. It is demonstrated that these tailored tubular scaffolds can effectively make endothelial cells to form an integrated hollow tubular structure on their inner surface and induce smooth muscle cells to form a circumferential orientation on their outer surface. These features of our tubular scaffolds make them highly promising for the construction of biomimetic blood vessels.There is a clinical need for tissue-engineered blood vessels that can be used to replace or bypass damaged arteries. The success of such grafts depends strongly on their ability to mimic native arteries; however, currently available artificial vessels are restricted by their complex processing, controversial integrity, or uncontrollable cell location and orientation. Here, we present new tubular scaffolds with specific surface microstructures for structural vessel mimicry. The tubular scaffolds are fabricated by rotationally expanding three-dimensional tubular inverse opals that are replicated from colloidal crystal templates in capillaries. Because of the ordered porous structure of the inverse opals, the expanded tubular scaffolds are imparted with circumferentially

  13. Characterization of a tubular flow chamber for studying platelet interaction with biologic and prosthetic materials: deposition of indium 111-labeled platelets on collagen, subendothelium, and expanded polytetrafluoroethylene

    SciTech Connect

    Badimon, L.; Turitto, V.; Rosemark, J.A.; Badimon, J.J.; Fuster, V.

    1987-12-01

    A plastic (Plexiglas) chamber for evaluating platelet deposition under controlled hemodynamic conditions has been developed. The perfusion chamber has been designed to retain the cylindrical shape typical of the vasculature, to be flexible enough to accept a variety of biologic and prosthetic materials, and to simulate a broad range of physiologic flow conditions in either an ex vivo or in vitro perfusion system. Three type of surfaces were exposed to blood flowing directly from the carotid artery of a heparinized pig through the perfusion chamber: de-endothelialized pig aorta, collagen strips from rabbit Achilles tendon, and an expanded polytetrafluoroethylene material (Gore-Tex). Platelets, previously radiolabeled with indium 111 and injected into the animal, were quantified on the material surface, and the total number of deposited platelets determined for a range of blood flow rates (5 to 40 ml/min) and exposure times (0.5 to 20 minutes). The deposition rates were correlated with theory for describing the mass transport of platelets to the test surface. At the wall shear rates investigated (105 to 850 sec-1), the deposition of platelets on subendothelium was strongly dependent on the local flow conditions. Values of deposition on Gore-Tex obtained at similar flow conditions (105 to 425 sec-1) were reduced compared with that observed on subendothelium and showed a markedly weaker dependence on the shear rate. In contrast, deposition of platelets on collagen was more than an order of magnitude greater than on subendothelium and showed a dependence on flow only at the lowest flow rate studied (10 ml/min). The results indicate that collagen is much more reactive than subendothelium and Gore-Tex with respect to the growth and stability of platelet aggregates and moreover suggest that flow mechanisms for depositing platelets on various surface may be substantially different.

  14. Nonequilibrium fixed points in longitudinally expanding scalar theories: Infrared cascade, Bose condensation, and a challenge for kinetic theory

    NASA Astrophysics Data System (ADS)

    Berges, J.; Boguslavski, K.; Schlichting, S.; Venugopalan, R.

    2015-11-01

    In [Phys. Rev. Lett. 114, 061601 (2015)], we reported on a new universality class for longitudinally expanding systems, encompassing strongly correlated non-Abelian plasmas and N -component self-interacting scalar field theories. Using classical-statistical methods, we showed that these systems share the same self-similar scaling properties for a wide range of momenta in a limit where particles are weakly coupled but their occupancy is high. Here we significantly expand on our previous work and delineate two further self-similar regimes. One of these occurs in the deep infrared (IR) regime of very high occupancies, where the nonequilibrium dynamics leads to the formation of a Bose-Einstein condensate. The universal IR scaling exponents and the spectral index characterizing the isotropic IR distributions are described by an effective theory derived from a systematic large-N expansion at next-to-leading order. Remarkably, this effective theory can be cast as a vertex-resummed kinetic theory. The other novel self-similar regime occurs close to the hard physical scale of the theory, and sets in only at later times. We argue that the important role of the infrared dynamics ensures that key features of our results for scalar and gauge theories cannot be reproduced consistently in conventional kinetic theory frameworks.

  15. Nonequilibrium fixed points in longitudinally expanding scalar theories: Infrared cascade, Bose condensation and a challenge for kinetic theory

    DOE PAGES

    Berges, J.; Schlichting, S.; Boguslavski, K.; ...

    2015-11-05

    In [Phys. Rev. Lett. 114, 061601 (2015)], we reported on a new universality class for longitudinally expanding systems, encompassing strongly correlated non-Abelian plasmas and N-component self-interacting scalar field theories. Using classical-statistical methods, we showed that these systems share the same self-similar scaling properties for a wide range of momenta in a limit where particles are weakly coupled but their occupancy is high. Here we significantly expand on our previous work and delineate two further self-similar regimes. One of these occurs in the deep infrared (IR) regime of very high occupancies, where the nonequilibrium dynamics leads to the formation of amore » Bose-Einstein condensate. The universal IR scaling exponents and the spectral index characterizing the isotropic IR distributions are described by an effective theory derived from a systematic large-N expansion at next-to-leading order. Remarkably, this effective theory can be cast as a vertex-resummed kinetic theory. The other novel self-similar regime occurs close to the hard physical scale of the theory, and sets in only at later times. In this study, we argue that the important role of the infrared dynamics ensures that key features of our results for scalar and gauge theories cannot be reproduced consistently in conventional kinetic theory frameworks.« less

  16. Nonequilibrium fixed points in longitudinally expanding scalar theories: Infrared cascade, Bose condensation and a challenge for kinetic theory

    SciTech Connect

    Berges, J.; Schlichting, S.; Boguslavski, K.; Venugopalan, R.

    2015-11-05

    In [Phys. Rev. Lett. 114, 061601 (2015)], we reported on a new universality class for longitudinally expanding systems, encompassing strongly correlated non-Abelian plasmas and N-component self-interacting scalar field theories. Using classical-statistical methods, we showed that these systems share the same self-similar scaling properties for a wide range of momenta in a limit where particles are weakly coupled but their occupancy is high. Here we significantly expand on our previous work and delineate two further self-similar regimes. One of these occurs in the deep infrared (IR) regime of very high occupancies, where the nonequilibrium dynamics leads to the formation of a Bose-Einstein condensate. The universal IR scaling exponents and the spectral index characterizing the isotropic IR distributions are described by an effective theory derived from a systematic large-N expansion at next-to-leading order. Remarkably, this effective theory can be cast as a vertex-resummed kinetic theory. The other novel self-similar regime occurs close to the hard physical scale of the theory, and sets in only at later times. In this study, we argue that the important role of the infrared dynamics ensures that key features of our results for scalar and gauge theories cannot be reproduced consistently in conventional kinetic theory frameworks.

  17. 30-MM Tubular Projectile

    DTIC Science & Technology

    1984-10-01

    Suiza tubular projectile 20 9. Inspection of Hispano Suiza sabot 21 10. Inspection of GAU-8 sabot 22 11. Firing data - 30-rn tubular projectile (Hispano... Suiza 23 copper banded) 12. Firing data - 30-m tubular projectile (GAU-8 plastic 24 banded) 13. Firing data - 30-m tubular projectile (GAU-8 copper 25...42 13. In-flight Hispano Suiza tubular projectiles 43 14. In-flight C4U-8 (plastic) tubular projectile 44 15. In-flight GCU-8 (copper) tubular

  18. Tubular Coupling

    NASA Technical Reports Server (NTRS)

    Rosenbaum, Bernard J. (Inventor)

    2000-01-01

    A system for coupling a vascular overflow graft or cannula to a heart pump. A pump pipe outlet is provided with an external tapered surface which receives the end of a compressible connula. An annular compression ring with a tapered internal bore surface is arranged about the cannula with the tapered internal surface in a facing relationship to the external tapered surface. The angle of inclination of the tapered surfaces is converging such that the spacing between the tapered surfaces decreases from one end of the external tapered surface to the other end thereby providing a clamping action of the tapered surface on a cannula which increases as a function of the length of cannula segment between the tapered surfaces. The annular compression ring is disposed within a tubular locking nut which threadedly couples to the pump and provides a compression force for urging the annular ring onto the cannula between the tapered surfaces. The nut has a threaded connection to the pump body. The threaded coupling to the pump body provides a compression force for the annular ring. The annular ring has an annular enclosure space in which excess cannula material from the compression between the tapered surfaces to "bunch up" in the space and serve as an enlarged annular ring segment to assist holding the cannula in place. The clamped cannula provides a seamless joint connection to the pump pipe outlet where the clamping force is uniformly applied to the cannula because of self alignment of the tapered surfaces. The nut can be easily disconnected to replace the pump if necessary.

  19. Tubular inverse opal scaffolds for biomimetic vessels.

    PubMed

    Zhao, Ze; Wang, Jie; Lu, Jie; Yu, Yunru; Fu, Fanfan; Wang, Huan; Liu, Yuxiao; Zhao, Yuanjin; Gu, Zhongze

    2016-07-14

    There is a clinical need for tissue-engineered blood vessels that can be used to replace or bypass damaged arteries. The success of such grafts depends strongly on their ability to mimic native arteries; however, currently available artificial vessels are restricted by their complex processing, controversial integrity, or uncontrollable cell location and orientation. Here, we present new tubular scaffolds with specific surface microstructures for structural vessel mimicry. The tubular scaffolds are fabricated by rotationally expanding three-dimensional tubular inverse opals that are replicated from colloidal crystal templates in capillaries. Because of the ordered porous structure of the inverse opals, the expanded tubular scaffolds are imparted with circumferentially oriented elliptical pattern microstructures on their surfaces. It is demonstrated that these tailored tubular scaffolds can effectively make endothelial cells to form an integrated hollow tubular structure on their inner surface and induce smooth muscle cells to form a circumferential orientation on their outer surface. These features of our tubular scaffolds make them highly promising for the construction of biomimetic blood vessels.

  20. Tubular hydrogen permeable metal foil membrane and method of fabrication

    DOEpatents

    Paglieri, Stephen N.; Birdsell, Stephen A.; Barbero, Robert S.; Snow, Ronny C.; Smith, Frank M.

    2006-04-04

    A tubular hydrogen permeable metal membrane and fabrication process comprises obtaining a metal alloy foil having two surfaces, coating the surfaces with a metal or metal alloy catalytic layer to produce a hydrogen permeable metal membrane, sizing the membrane into a sheet with two long edges, wrapping the membrane around an elongated expandable rod with the two long edges aligned and overlapping to facilitate welding of the two together, placing the foil wrapped rod into a surrounding fixture housing with the two aligned and overlapping foil edges accessible through an elongated aperture in the surrounding fixture housing, expanding the elongated expandable rod within the surrounding fixture housing to tighten the foil about the expanded rod, welding the two long overlapping foil edges to one another generating a tubular membrane, and removing the tubular membrane from within the surrounding fixture housing and the expandable rod from with the tubular membrane.

  1. Expanding the regulatory network that controls nitrogen fixation in Sinorhizobium meliloti: elucidating the role of the two-component system hFixL-FxkR.

    PubMed

    Reyes-González, Alma; Talbi, Chouhra; Rodríguez, Susana; Rivera, Patricia; Zamorano-Sánchez, David; Girard, Lourdes

    2016-06-01

    In Sinorhizobium meliloti, nitrogen fixation is regulated in response to oxygen concentration through the FixL-FixJ two-component system (TCS). Besides this conserved TCS, the field isolate SM11 also encodes the hFixL-FxkR TCS, which is responsible for the microoxic response in Rhizobium etli. Through genetic and physiological assays, we evaluated the role of the hFixL-FxkR TCS in S. meliloti SM11. Our results revealed that this regulatory system activates the expression of a fixKf orthologue (fixKa), in response to low oxygen concentration. Null mutations in either hFixL or FxkR promote upregulation of fixK1, a direct target of FixJ. Furthermore, the absence of this TCS translates into higher nitrogen fixation values as well as higher expression of fixN1 in nodules. Individual mutations in each of the fixK-like regulators encoded in the S. meliloti SM11 genome do not completely restrict fixN1 or fixN2 expression, pointing towards redundancy among these regulators. Both copies of fixN are necessary to achieve optimal levels of nitrogen fixation. This work provides evidence that the hFixL-FxkR TCS is activated in response to low oxygen concentration in S. meliloti SM11 and that it negatively regulates the expression of fixK1, fixN1 and nitrogen fixation.

  2. Proximal renal tubular acidosis

    MedlinePlus

    ... References Krapf R, Seldin DW, Alpern RJ. Clinical syndromes of metabolic acidosis. In: Alpern RJ, Caplan M, Moe OW, ... 529. Read More Distal renal tubular acidosis Fanconi syndrome Low potassium level Metabolic acidosis Osteomalacia Respiratory acidosis Rickets Review Date 10/ ...

  3. Distal renal tubular acidosis

    MedlinePlus

    ... get better with treatment. When to Contact a Medical Professional Call your health care provider if you have symptoms of distal renal tubular acidosis. Get medical help right away if you develop emergency symptoms ...

  4. Tubular copper thrust chamber design study

    NASA Technical Reports Server (NTRS)

    Masters, A. I.; Galler, D. E.

    1992-01-01

    The use of copper tubular thrust chambers is particularly important in high performance expander cycle space engines. Tubular chambers have more surface area than flat wall chambers, and this extra surface area provides enhanced heat transfer for additional energy to power the cycle. This paper was divided into two sections: (1) a thermal analysis and sensitivity study; and (2) a preliminary design of a selected thrust chamber configuration. The thermal analysis consisted of a statistical optimization to determine the optimum tube geometry, tube booking, thrust chamber geometry, and cooling routing to achieve the maximum upper limit chamber pressure for a 25,000 pound thrust engine. The preliminary design effort produced a layout drawing of a tubular thrust chamber that is three inches shorter than the Advanced Expander Test Bed (AETB) milled channel chamber but is predicted to provide a five percent increase in heat transfer. Testing this chamber in the AETB would confirm the inherent advantages of tubular chamber construction and heat transfer.

  5. Tubular electric heater with a thermocouple assembly

    DOEpatents

    House, R.K.; Williams, D.E.

    1975-08-01

    This patent relates to a thermocouple or other instrumentation which is installed within the walls of a tubular sheath surrounding a process device such as an electric heater. The sheath comprises two concentric tubes, one or both of which have a longitudinal, concave crease facing the other tube. The thermocouple is fixedly positioned within the crease and the outer tube is mechanically reduced to form an interference fit onto the inner tube. (auth)

  6. Exceptional points in rolled-up tubular microcavities

    NASA Astrophysics Data System (ADS)

    Fang, Yangfu; Li, Shilong; Kiravittaya, Suwit; Mei, Yongfeng

    2017-09-01

    We observe the crossing and anti-crossing behaviors of nearly degenerate mode pairs in a rolled-up tubular microcavity, which can be explained by weak and strong couplings between the modes. Exceptional points (EPs) are thus obtained in the tubular microcavity since they are the critical point where a transition from strong to weak coupling occurs. Rolled-up tubular microcavities with a given resonant mode approaching an EP in parameter space expanded by two continuous variables are also realized without using near-field probes. Microcavities with EPs prepared in a rolled-up way could be mechanically stable and would be used for optofluidic detection.

  7. [Anatomo-pathological alterations of the lung in hemorrhagic shock studied with lungs fixed by classical method and when expanded (author's transl)].

    PubMed

    Dos Santos, M L; Furlaneto, J A; Beppu, O S; Nakatani, J; Ratto, O R

    1979-09-01

    The authors have studied lungs of 14 dogs that have been submitted to hemorrhagic shock. The right lung was fixed in the ordinary way and the left lung in expansion. They examine preparations of a 11 lobes of both lungs. Vacuolar degeneration of the cells of the terminal bronchioles and the respiratory bronchioles, hypertrophy of the cells of the alveolar sac of mild degree were constant findings. Alveolar edema of some intensity was observed in all preparations. Atelectasias of severe degree were only seen in preparations fixed in the ordinary way.

  8. Renal tubular acidosis.

    PubMed

    Chan, J C

    1983-03-01

    In the past decade major advances in our understanding of renal tubular hydrogen ion secretion and bicarbonate reabsorption have provided new insight into the pathophysiology of renal tubular acidosis. Thus "fragment to fragment clings" and the number of disorders categorized within the syndrome grows, until we have come to know and name four types, with many subtypes. We hope this new perspective provides a basis for the physician to recognize renal tubular acidosis in its several forms so that an informed decision may be arrived at in choosing the best therapy. The physician may also be prepared to reasonably project the prognosis for each patient. We also hope that our detailed examination of renal acidification will provide a reference for delineation of new clinical expressions of acid-base disorders and kidney malfunction certain to be described in the years ahead.

  9. Method and tool for contracting tubular members by electro-hydraulic forming before hydroforming

    SciTech Connect

    Golovashchenko, Sergey Fedorovich

    2011-03-15

    A tubular preform is contracted in an electro-hydraulic forming operation. The tubular preform is wrapped with one or more coils of wire and placed in a chamber of an electro-hydraulic forming tool. The electro-hydraulic forming tool is discharged to form a compressed area on a portion of the tube. The tube is then placed in a hydroforming tool that expands the tubular preform to form a part.

  10. Surgical Treatment of Tubular Breast Type II

    PubMed Central

    Dabizha, Oleksii Y.; Kostenko, Alona A.; Gomolyako, Irina V.; Samko, Kristina A.; Borovyk, Denys V.

    2016-01-01

    Background: Tubular breasts are caused by connective tissue malformation and occur in puberty. The main clinical characteristics of the tubular breast are breast asymmetry, dense fibrous ring around the areola, hernia bulging of the areola, megaareola, and hypoplasia of quadrants of the breast. Pathology causes great psychological discomfort to patients. Methods: This study included 17 patients, aged 18 to 34 years, with tubular breast type II who had bilateral pathology and were treated from 2013 to 2016. They had surgical treatment by method of the clinic. Correction technique consisted of mobilization of the central part of the gland and formation of a glandular flap with vertical and horizontal scorings, which looks like a “chessboard,” that was sufficient to cover the lower pole of the implant. The flap was fixed to the submammary folds with stitches that prevented its reduction and accented a new submammary fold. To underscore the importance of the method and to study the structural features of the vascular bed of tubular breast tissue, a morphological study was conducted. Results: Mean follow-up time was 25 months (range between 13 and 37 mo). The proposed technique achieved good results. Complications (hematoma, circumareolar scarring, and “double-bubble” deformity) were identified in 4 patients. Conclusions: Our morphological study confirmed that tubular breast tissue has increased vascularity due to the vessels with characteristic minor malformation and due to the high restorative potential of the vascular bed. Therefore, an extended glandular flap could be freely mobilized without damaging its blood supply; thus, the flap in most cases covered the implant completely and good aesthetic results were achieved. PMID:27826461

  11. Markers of tubular dysfunction.

    PubMed

    Piscator, M

    1989-03-01

    Since the first description of tubular proteinuria in 1958, much progress has been made with regard to diagnostic means for detecting small changes in the function of the proximal tubule. Small increases in the excretion of low-molecular-weight proteins can now be determined with great accuracy. Determination of total protein is an economic way of screening large populations but does not give specific information on the type of damage. Determinations of glucose, phosphate and amino acids are relatively insensitive methods, since their excretion is also dependent on diet and nutritional status. Determination of high-molecular-weight enzymes released from damaged tubular cells may be of use for studies of acute as well as chronic effects of nephrotoxic agents, but more data are needed.

  12. [Inherited tubular renal acidosis].

    PubMed

    Bouzidi, Hassan; Hayek, Donia; Nasr, Dhekra; Daudon, Michel; Fadhel Najjar, Mohamed

    2011-01-01

    Renal tubular acidosis (RTA) is a tubulopathy characterized by metabolic acidosis with normal anion gap secondary to abnormalities of renal acidification. RTA can be classified into four main subtypes: distal RTA, proximal RTA, combined proximal and distal RTA, and hyperkalemic RTA. Distal RTA (type 1) is caused by the defect of H(+) secretion in the distal tubules and is characterized by the inability to acidify the urine below pH 5.5 during systemic acidemia. Proximal RTA (type 2) is caused by an impairment of bicarbonate reabsorption in the proximal tubules and characterized by a decreased renal bicarbonate threshold. Combined proximal and distal RTA (type 3) secondary to a reduction in tubular reclamation of bicarbonate and an inability to acidify the urine in the face of severe acidemia. Hyperkalemic RTA (type 4) may occur as a result of aldosterone deficiency or tubular insensitivity to aldosterone. Clinicians should be alert to the presence of RTA in patients with an unexplained normal anion gap acidosis, hypokalemia, recurrent nephrolithiasis and nephrocalcinosis. The mainstay of treatment of RTA remains alkali replacement.

  13. [Tubular renal acidosis].

    PubMed

    Seidowsky, A; Moulonguet-Doleris, L; Hanslik, T; Yattara, H; Ayari, H; Rouveix, E; Massy, Z A; Prinseau, J

    2014-01-01

    Renal tubular acidosis (RTAs) are a group of metabolic disorders characterized by metabolic acidosis with normal plasma anion gap. There are three main forms of RTA: a proximal RTA called type II and a distal RTA (type I and IV). The RTA type II is a consequence of the inability of the proximal tubule to reabsorb bicarbonate. The distal RTA is associated with the inability to excrete the daily acid load and may be associated with hyperkalaemia (type IV) or hypokalemia (type I). The most common etiology of RTA type IV is the hypoaldosteronism. The RTAs can be complicated by nephrocalcinosis and obstructive nephrolithiasis. Alkalinization is the cornerstone of treatment.

  14. Tubular collagen scaffolds with radial elasticity for hollow organ regeneration.

    PubMed

    Versteegden, Luuk R; van Kampen, Kenny A; Janke, Heinz P; Tiemessen, Dorien M; Hoogenkamp, Henk R; Hafmans, Theo G; Roozen, Edwin A; Lomme, Roger M; van Goor, Harry; Oosterwijk, Egbert; Feitz, Wout F; van Kuppevelt, Toin H; Daamen, Willeke F

    2017-04-01

    Tubular collagen scaffolds have been used for the repair of damaged hollow organs in regenerative medicine, but they generally lack the ability to reversibly expand in radial direction, a physiological characteristic seen in many native tubular organs. In this study, tubular collagen scaffolds were prepared that display a shape recovery effect and therefore exhibit radial elasticity. Scaffolds were constructed by compression of fibrillar collagen around a star-shaped mandrel, mimicking folds in a lumen, a typical characteristic of empty tubular hollow organs, such as ureter or urethra. Shape recovery effect was introduced by in situ fixation using a star-shaped mandrel, 3D-printed clamps and cytocompatible carbodiimide crosslinking. Prepared scaffolds expanded upon increase of luminal pressure and closed to the star-shaped conformation after removal of pressure. In this study, we applied this method to construct a scaffold mimicking the dynamics of human urethra. Radial expansion and closure of the scaffold could be iteratively performed for at least 1000 cycles, burst pressure being 132±22mmHg. Scaffolds were seeded with human epithelial cells and cultured in a bioreactor under dynamic conditions mimicking urination (pulse flow of 21s every 2h). Cells adhered and formed a closed luminal layer that resisted flow conditions. In conclusion, a new type of a tubular collagen scaffold has been constructed with radial elastic-like characteristics based on the shape of the scaffold, and enabling the scaffold to reversibly expand upon increase in luminal pressure. These scaffolds may be useful for regenerative medicine of tubular organs.

  15. Tapered, tubular polyester fabric

    NASA Technical Reports Server (NTRS)

    Lapointe, Donat J. E. (Inventor); Wright, Lawrence T. (Inventor); Vincent, Laurence J. (Inventor)

    1987-01-01

    A tapered tubular polyester sleeve is described to serve as the flexible foundation for a spacesuit limb covering. The tube has a large end and a small end with a length to be determined. The ratio of taper is also determined by scale factors. All the warp yarns extend to the large end. A requisite number of warp yarns extend the full length of the sleeve. Other warp yarns extend from the large end but are terminated along the length of the sleeve. It is then woven with a filling yarn which extends in a full circle along the full length of the sleeve to thereby define the tapered sleeve. The sleeve after fabrication is then placed on a mandrel, heated in an oven, and then attached to the arm or other limb of the spacesuit.

  16. Tapered, tubular polyester fabric

    NASA Technical Reports Server (NTRS)

    LaPointe, Donat J. E. (Inventor); Vincent, Laurence J. (Inventor); Wright, Lawrence T. (Inventor)

    1988-01-01

    A tapered tubular polyester sleeve as set forth. It has a large end 12 and a small end 14 with a length to be determined. The ratio of taper is also determined by scale factors. All the warp yarns extend to the large end 12. A requisite number of warp yarns 16 extend the full length of the sleeve. Other warp yarns exemplified at 18, 22, 26, 28, 30 and 32 extend from the large end but are terminated along the length of the sleeve. It is then woven with a filling yarn 40 which extends in a full circle along the full length of the sleeve to thereby define the tapered sleeve. The sleeve after fabrication is then placed on a mandrel 42, heated in an oven 44 and is thereafter placed on the arm or other limb of a space suit exemplified at 50.

  17. Renal tubular acidosis.

    PubMed

    Rothstein, M; Obialo, C; Hruska, K A

    1990-12-01

    Renal tubular acidosis refers to a group of disorders that result from pure tubular damage without concomitant glomerular damage. They could be hereditary (primary) or acquired (secondary to various disease states like sickle cell disease, obstructive uropathy, postrenal transplant, autoimmune disease, or drugs). The hallmark of the disorder is the presence of hyperchloremic metabolic acidosis with, or without, associated defects in potassium homeostasis, a UpH greater than 5.5 in the presence of systemic acidemia, and absence of an easily identifiable cause of the acidemia. There are three physiologic types whose basic defects are impairment of or a decrease in acid excretion, i.e., type 1 (dRTA); a failure in bicarbonate reabsorption, i.e., type 2 (pRTA); and deficiency of buffer or impaired generation of NH4+, i.e., type 4 RTA. Several pathophysiologic mechanisms have been postulated for these various types. pRTA is the least common of all in the adult population. It rarely occurs as an isolated defect. It is frequently accompanied by diffuse proximal tubule transport defects with aminoaciduria, glycosuria, hyperphosphaturia, and so forth (Fanconi syndrome). dRTA is associated with a high incidence of nephrolithiasis, nephrocalcinosis, osteodystrophy, and growth retardation (in children). Osteodystrophy also occurs in pRTA to a lesser degree and is believed to be secondary to hypophosphatemia. Patients with type 4 RTA usually have mild renal insufficiency from either diabetes mellitus or interstitial nephritis. Acute bicarbonate loading will result in a high fractional excretion of bicarbonate greater than 15% (FEHCO3- greater than 15%) in patients with pRTA, but FEHCO3- less than 3% in patients with dRTA. Type I patients will also have a low (U - B) PCO2 with bicarbonate loading. They are also unable to lower their urine pH to less than 5.5 with NH4Cl loading. The treatment of these patients involves avoidance of precipitating factors when possible, treatment

  18. Tubular organ epithelialisation

    PubMed Central

    Saksena, Rhea; Gao, Chuanyu; Wicox, Mathew; de Mel, Achala

    2016-01-01

    Hollow, tubular organs including oesophagus, trachea, stomach, intestine, bladder and urethra may require repair or replacement due to disease. Current treatment is considered an unmet clinical need, and tissue engineering strategies aim to overcome these by fabricating synthetic constructs as tissue replacements. Smart, functionalised synthetic materials can act as a scaffold base of an organ and multiple cell types, including stem cells can be used to repopulate these scaffolds to replace or repair the damaged or diseased organs. Epithelial cells have not yet completely shown to have efficacious cell–scaffold interactions or good functionality in artificial organs, thus limiting the success of tissue-engineered grafts. Epithelial cells play an essential part of respective organs to maintain their function. Without successful epithelialisation, hollow organs are liable to stenosis, collapse, extensive fibrosis and infection that limit patency. It is clear that the source of cells and physicochemical properties of scaffolds determine the successful epithelialisation. This article presents a review of tissue engineering studies on oesophagus, trachea, stomach, small intestine, bladder and urethral constructs conducted to actualise epithelialised grafts. PMID:28228931

  19. Tubular organ epithelialisation.

    PubMed

    Saksena, Rhea; Gao, Chuanyu; Wicox, Mathew; de Mel, Achala

    2016-01-01

    Hollow, tubular organs including oesophagus, trachea, stomach, intestine, bladder and urethra may require repair or replacement due to disease. Current treatment is considered an unmet clinical need, and tissue engineering strategies aim to overcome these by fabricating synthetic constructs as tissue replacements. Smart, functionalised synthetic materials can act as a scaffold base of an organ and multiple cell types, including stem cells can be used to repopulate these scaffolds to replace or repair the damaged or diseased organs. Epithelial cells have not yet completely shown to have efficacious cell-scaffold interactions or good functionality in artificial organs, thus limiting the success of tissue-engineered grafts. Epithelial cells play an essential part of respective organs to maintain their function. Without successful epithelialisation, hollow organs are liable to stenosis, collapse, extensive fibrosis and infection that limit patency. It is clear that the source of cells and physicochemical properties of scaffolds determine the successful epithelialisation. This article presents a review of tissue engineering studies on oesophagus, trachea, stomach, small intestine, bladder and urethral constructs conducted to actualise epithelialised grafts.

  20. Thermal expander

    NASA Astrophysics Data System (ADS)

    Huang, Junying; Shen, Xiangying; Jiang, Chaoran; Wu, Zuhui; Huang, Jiping

    2017-08-01

    One type of thermal device, named as thermal expander, is proposed and verified through both simulation and experiment. The thermal expander performs an efficient way to expand a heat flow of line-shape front. Moreover, the thermal expander shows an advantage in rectifying a heat flow from crooked front to line-shape front, which indicates that the thermal expander could act as an efficient point-to-line heat source convertor. We suggest that the thermal expander would be of help to energy saving and emission reduction, especially in thermal circuits and thermal management.

  1. Mars Life? - Microscopic Tubular Structures

    NASA Image and Video Library

    1996-08-09

    This electron microscope image shows tubular structures of likely Martian origin. These structures are very similar in size and shape to extremely tiny microfossils found in some Earth rocks. http://photojournal.jpl.nasa.gov/catalog/PIA00287

  2. Hand-Operated Hydraulic Tube Expander

    NASA Technical Reports Server (NTRS)

    Hagan, David W.; Wolff, Edwin D.

    1995-01-01

    Hand-operated tool expands end portion of narrow metal or plastic tube to slightly larger diameter. Used on tubes with original inner diameters as small as 0.060 in. Includes replaceable tip comprising ferrule and tubular expansion sleeve sized for sliding fit into tube to be expanded. Expansion sleeve swells in response to internal hydraulic pressure generated by turning handle and thereby advancing piston.

  3. Renal tubular function in hyperparathyroidism.

    PubMed Central

    van 't Hoff, W.; Bicknell, E. J.

    1989-01-01

    Renal tubular function was assessed in a group of patients with mild hyperparathyroidism before and after a mean period of 2.7 years conservative management. It was also assessed, before and after a mean of 3.3 years following surgery in a group of patients with initially higher plasma calcium concentration. Mean maximum urine osmolality was within the accepted range as was the maximum urine plasma hydrogen ion gradient in both groups at the time of diagnosis. No significant change in renal tubular function was observed in either group over the periods of this study. Although deterioration after a long period cannot be excluded, we do not consider that regular assessment of renal tubular function is necessary in the conservative management of primary hyperparathyroidism. PMID:2616415

  4. Tubular camshaft assemblies and the like

    SciTech Connect

    Arnold, P.D.; Kaywood, R.G.

    1990-05-08

    This patent describes a camshaft assembly for internal combustion engines and the like. It comprises: cam elements each including a nonround axial opening having an odd number of regularly spaced lobes of less than 3.0 percent eccentricity and primarily defined by joined outwardly convex arc of varying radii, the elements being secured in predetermined fixed orientation the spacing, with the openings axially aligned, on a hollow tube expanded into interference engagement with all the element openings.

  5. Mars Life? - Microscopic Tubular Structures

    NASA Image and Video Library

    1996-08-09

    This electron microscope image shows extremely tiny tubular structures that are possible microscopic fossils of bacteria-like organisms that may have lived on Mars more than 3.6 billion years ago. http://photojournal.jpl.nasa.gov/catalog/PIA00285

  6. A Simple Tubular Reactor Experiment.

    ERIC Educational Resources Information Center

    Hudgins, Robert R.; Cayrol, Bertrand

    1981-01-01

    Using the hydrolysis of crystal violet dye by sodium hydroxide as an example, the theory, apparatus, and procedure for a laboratory demonstration of tubular reactor behavior are described. The reaction presented can occur at room temperature and features a color change to reinforce measured results. (WB)

  7. METHOD OF FABRICATING TUBULAR UNITS

    DOEpatents

    Ohlinger, L.A.

    1961-06-20

    A process is described for making a fuel element comprising a tubular jacket and fuel slugs held by the jacket in longitudinally spaced relation to one another. The jacket is lengthened as a result of being drawn down to grip the fuel slugs. As an intentional incident to this operation, the fuel slugs become longitudinally spaced from one another.

  8. A Simple Tubular Reactor Experiment.

    ERIC Educational Resources Information Center

    Hudgins, Robert R.; Cayrol, Bertrand

    1981-01-01

    Using the hydrolysis of crystal violet dye by sodium hydroxide as an example, the theory, apparatus, and procedure for a laboratory demonstration of tubular reactor behavior are described. The reaction presented can occur at room temperature and features a color change to reinforce measured results. (WB)

  9. Tubular reabsorption in normal renal function.

    PubMed

    O'Connor, W J

    1984-01-01

    The purpose here is to examine in relation to normal renal function three factors which might affect tubular reabsorption: (1) The reabsorption of SO4, PO4, K, Cl, HCO3 and water are all linked to the reabsorption of Na. This would amount to the reabsorption by the tubules of a net reabsorbate of a composition similar to Locke's fluid. Fixed linkage of the reabsorption of a substance to the reabsorption of Na would be a very effective way of maintaining its plasma concentration within a narrow range. The substance would be retained unless its plasma concentration exceeds a threshold value and then small increase in plasma concentration determines its excretion. (2) The rate of reabsorption of Na and substances linked to it is increased when the volume of the intraluminal fluid is increased. This would explain why there is only a small increase in the excretion of Na and other electrolytes when glomerular filtration rate is increased after a meal of meat. (3) Plasma protein concentration affects tubular reabsorption. This would explain why fall in plasma protein is a main agent determining Na excretion in normal animals. Trying to see 'how far the observed facts can be brought into accord with a theory' reveals the difficulty of applying critical tests. On the one hand, the theories are not stated quantitatively in reference to the small changes of normal life; rather the evidence is from experiments with large changes. On the other hand, the small changes within the range of normal function, while themselves statistically significant, are too small for effective investigation of circumstances which may modify them. In the examples discussed here, we cannot say more than that the theories could explain the facts and their participation cannot be excluded.

  10. Micro-Tubular Fuel Cells

    NASA Technical Reports Server (NTRS)

    Kimble, Michael C.; Anderson, Everett B.; Jayne, Karen D.; Woodman, Alan S.

    2004-01-01

    Micro-tubular fuel cells that would operate at power levels on the order of hundreds of watts or less are under development as alternatives to batteries in numerous products - portable power tools, cellular telephones, laptop computers, portable television receivers, and small robotic vehicles, to name a few examples. Micro-tubular fuel cells exploit advances in the art of proton-exchange-membrane fuel cells. The main advantage of the micro-tubular fuel cells over the plate-and-frame fuel cells would be higher power densities: Whereas the mass and volume power densities of low-pressure hydrogen-and-oxygen-fuel plate-and-frame fuel cells designed to operate in the targeted power range are typically less than 0.1 W/g and 0.1 kW/L, micro-tubular fuel cells are expected to reach power densities much greater than 1 W/g and 1 kW/L. Because of their higher power densities, micro-tubular fuel cells would be better for powering portable equipment, and would be better suited to applications in which there are requirements for modularity to simplify maintenance or to facilitate scaling to higher power levels. The development of PEMFCs has conventionally focused on producing large stacks of cells that operate at typical power levels >5 kW. The usual approach taken to developing lower-power PEMFCs for applications like those listed above has been to simply shrink the basic plate-and-frame configuration to smaller dimensions. A conventional plate-and-frame fuel cell contains a membrane/electrode assembly in the form of a flat membrane with electrodes of the same active area bonded to both faces. In order to provide reactants to both electrodes, bipolar plates that contain flow passages are placed on both electrodes. The mass and volume overhead of the bipolar plates amounts to about 75 percent of the total mass and volume of a fuel-cell stack. Removing these bipolar plates in the micro-tubular fuel cell significantly increases the power density.

  11. Better understanding of tubular helical buckling

    SciTech Connect

    Wu, J.

    1996-09-01

    Tubular buckling is a significant problem within the oil industry. Although it has been studied for many years, methods to analyze tubular helical buckling continues to appear in the literature. Several criteria have been derived and presented leading to confusion in understanding and correctly predicting tubular helical buckling. The prediction of tubular helical buckling is complicated by the fact that the tubular is confined within the wellbore. The tubular initially buckles sinusoidally, and then changes into the shape of a helix (helical buckling) as the axial load increases. Different approaches in modeling the helical buckling process and the use of energy methods resulted in those different helical buckling criteria. Helical buckling criteria proposed in the literature, as well as their derivations are discussed in this paper, to help better understand and effectively predict tubular helical buckling in engineering operations.

  12. Early detection of tubular dysfunction.

    PubMed

    Piscator, M

    1991-11-01

    The determination of low-molecular-weight proteins in urine as a tool for early detection of damage to the proximal tubules is briefly discussed. Beta 2-microglobulin, retinol-binding protein and alpha 1-microglobulin are at present the most widely used markers for tubular dysfunction. The determination of beta 2-microglobulin has earlier been the method of choice, but due to its instability at low pH there are certain disadvantages. Available data indicate that alpha 1-microglobulin may replace beta 2-microglobulin for screening purposes. The low-molecular-weight proteins are at present the best markers for early detection of tubular dysfunction; other constituents are not as well suited for this, even if the determination of urine enzymes has its supporters.

  13. Tubular aggregates: their association with myalgia.

    PubMed Central

    Niakan, E; Harati, Y; Danon, M J

    1985-01-01

    Three thousand consecutive muscle biopsies were reviewed for the presence of tubular aggregates and their association with clinical symptomatology. Tubular aggregates were detected in 19 patients (0.6%). Twelve of these nineteen patients had severe myalgia, and the most abundant tubular aggregates were found in biopsies of patients with myalgia. Seven patients had only myalgia as their clinical symptomatology with normal physical examination. An additional five patients with tubular aggregates and myalgia had concomitant amyotrophic lateral sclerosis (2) or neuropathy (3). The high incidence of myalgia associated with tubular aggregates in our patients and the fact that tubular aggregates originate from sarcoplasmic reticulum suggest a role played by this structure in the pathogenesis of myalgia. Images PMID:2995591

  14. Renal tubular acidosis type 4 in pregnancy.

    PubMed

    Jakes, Adam Daniel; Baynes, Kevin; Nelson-Piercy, Catherine

    2016-03-17

    We describe the clinical course of renal tubular acidosis (RTA) type 4 in pregnancy, which has not been previously published. Renal tubular acidosis type 4 is a condition associated with increased urinary ammonia secondary to hypoaldosteronism or pseudohypoaldosteronism. Pregnancy may worsen the hyperkalaemia and acidosis of renal tubular acidosis type 4, possibly through an antialdosterone effect. We advise regular monitoring of potassium and pH throughout pregnancy to ensure safe levels are maintained.

  15. Renal tubular secretion of pramipexole.

    PubMed

    Knop, Jana; Hoier, Eva; Ebner, Thomas; Fromm, Martin F; Müller, Fabian

    2015-11-15

    The dopamine agonist pramipexole is cleared predominantly by the kidney with a major contribution of active renal secretion. Previously the organic cation transporter 2 (OCT2) was shown to be involved in the uptake of pramipexole by renal tubular cells, while the mechanism underlying efflux into tubular lumen remains unclear. Cimetidine, a potent inhibitor of multidrug and toxin extrusion proteins 1 (MATE1) and 2-K (MATE2-K), decreases renal pramipexole clearance in humans. We hypothesized that, in addition to OCT2, pramipexole may be a substrate of MATE-mediated transport. Pramipexole uptake was investigated using MDCK or HEK cells overexpressing OCT2, MATE1 or MATE2-K and the respective vector controls (Co). Transcellular pramipexole transport was investigated in MDCK cells single- or double-transfected with OCT2 and/or MATE1 and in Co cells, separating a basal from an apical compartment in a model for renal tubular secretion. Pramipexole uptake was 1.6-, 1.1-, or 1.6-folds in cells overexpressing OCT2, MATE1 or MATE2-K, respectively as compared to Co cells (p<0.05). In transcellular transport experiments, intracellular pramipexole accumulation was 1.7-folds in MDCK-OCT2 (p<0.001), and transcellular pramipexole transport was 2.2- and 4.0-folds in MDCK-MATE1 and MDCK-OCT2-MATE1 cells as compared to Co cells (p<0.001). Transcellular pramipexole transport was pH dependent and inhibited by cimetidine with IC50 values of 12μM and 5.5μM in MATE1 and OCT2-MATE1 cells, respectively. Taken together, coordinate activity of OCT2-mediated uptake and MATE-mediated efflux determines pramipexole renal secretion. Reduced OCT2 or MATE transport activity due to genetic variation or drug-drug interactions may affect pramipexole renal secretion. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. Plastic deformation of tubular crystals by dislocation glide.

    PubMed

    Beller, Daniel A; Nelson, David R

    2016-09-01

    Tubular crystals, two-dimensional lattices wrapped into cylindrical topologies, arise in many contexts, including botany and biofilaments, and in physical systems such as carbon nanotubes. The geometrical principles of botanical phyllotaxis, describing the spiral packings on cylinders commonly found in nature, have found application in all these systems. Several recent studies have examined defects in tubular crystals associated with crystalline packings that must accommodate a fixed tube radius. Here we study the mechanics of tubular crystals with variable tube radius, with dislocations interposed between regions of different phyllotactic packings. Unbinding and separation of dislocation pairs with equal and opposite Burgers vectors allow the growth of one phyllotactic domain at the expense of another. In particular, glide separation of dislocations offers a low-energy mode for plastic deformations of solid tubes in response to external stresses, reconfiguring the lattice step by step. Through theory and simulation, we examine how the tube's radius and helicity affects, and is in turn altered by, the mechanics of dislocation glide. We also discuss how a sufficiently strong bending rigidity can alter or arrest the deformations of tubes with small radii.

  17. Plastic deformation of tubular crystals by dislocation glide

    NASA Astrophysics Data System (ADS)

    Beller, Daniel A.; Nelson, David R.

    2016-09-01

    Tubular crystals, two-dimensional lattices wrapped into cylindrical topologies, arise in many contexts, including botany and biofilaments, and in physical systems such as carbon nanotubes. The geometrical principles of botanical phyllotaxis, describing the spiral packings on cylinders commonly found in nature, have found application in all these systems. Several recent studies have examined defects in tubular crystals associated with crystalline packings that must accommodate a fixed tube radius. Here we study the mechanics of tubular crystals with variable tube radius, with dislocations interposed between regions of different phyllotactic packings. Unbinding and separation of dislocation pairs with equal and opposite Burgers vectors allow the growth of one phyllotactic domain at the expense of another. In particular, glide separation of dislocations offers a low-energy mode for plastic deformations of solid tubes in response to external stresses, reconfiguring the lattice step by step. Through theory and simulation, we examine how the tube's radius and helicity affects, and is in turn altered by, the mechanics of dislocation glide. We also discuss how a sufficiently strong bending rigidity can alter or arrest the deformations of tubes with small radii.

  18. Hydrodynamic drive of tubular centrifuges

    SciTech Connect

    Tsybul'nik, A.P.

    1986-07-01

    A drive has been developed for a tubular centrifuge having a 10 kW ASTs-10-504 high-frequency electric motor with a synchronous rotation speed of 15,000 rpm. Despite a few demerits, the drive met the basic production requirements; simplicity and reliability of design, admissable rotation speed, and explosion resistance. However, this drive for tubular centrifuges had to be abandoned because experimental prototypes of high-frequency motors were used for the industrial tests and lot production of such motors is not probable in the near future. Industrial tests of a new hydrodynamic drive were performed, and the schematic diagram is shown. The hydrodrive was tested during centrifuge operation with polyester lac. It was found that the hydodynamic drive is distinguished by operational reliability and easy serviceability, holds promise for increased centrifuge speed, ensures smooth start of the centrifuge and satisfactory stability of the rotor rotation speed in the steady regime, reliably protects the motor from overloading and is fully explosion-proof.

  19. Design of hybrid composite tubulars

    SciTech Connect

    Ochoa, O.O.; Ross, G.R.; Liggett, G.M.

    1996-12-01

    Hybrid composite tubulars are one of the unique structures that illustrate the tailorability of composites to offshore operating conditions. Herein, the focus is on filament wound composite tubulars that have glass and carbon as reinforcing fibers within the same thermoset matrix. In the present research program, the multiple scales associated with the material constituents and the geometric configuration are analytically and experimentally examined. The first scale is at the micromechanics level where the interaction between the two different fiber types and the matrix are studied in terms of moisture absorption and potential debonds. Experiments are conducted on sea water saturated coupons to capture the aging effect on the material properties. The second scale is at the structural level and focuses on the optimization of the filament wound hybrid composite tube geometry. The global tube response efforts focus on the recommended stacking sequence as well as the degree of hybridization to carry combined axial and pressure loads. ABAQUS{copyright} is used to model the tube subjected to moisture and thermomechanical loads with composite shell elements. The mechanical loads considered are axial tension and internal pressure. The results to date indicate that the implementation of a progressive failure criteria in the finite element procedure accurately captures the response observed in testing of pressurized composite tubes. Structural similitude is used to relate the behavior of model tubes to candidate prototypes capable of withstanding the dynamic loads associated with currents and waves.

  20. High-temperature, high-pressure bonding of nested tubular metallic components

    DOEpatents

    Quinby, Thomas C.

    1980-01-01

    This invention is a tool for effecting high-temperature, high-compression bonding between the confronting faces of nested, tubular, metallic components. In a typical application, the tool is used to produce tubular target assemblies for irradiation in nuclear reactors or particle accelerators, the target assembly comprising a uranium foil and an aluminum-alloy substrate. The tool preferably is composed throughout of graphite. It comprises a tubular restraining member in which a mechanically expandable tubular core is mounted to form an annulus with the member. The components to be bonded are mounted in nested relation in the annulus. The expandable core is formed of individually movable, axially elongated segments whose outer faces cooperatively define a cylindrical pressing surface and whose inner faces cooperatively define two opposed, inwardly tapered, axial bores. Tapered rams extend respectively into the bores. The loaded tool is mounted in a conventional hot-press provided with evacuation means, heaters for maintaining its interior at bonding temperature, and hydraulic cylinders for maintaining a selected inwardly directed pressure on the tapered rams. With the hot-press evacuated and the loaded tool at the desired temperature, the cylinders are actuated to apply the selected pressure to the rams. The rams in turn expand the segmented core to maintain the nested components in compression against the restraining member. These conditions are maintained until the confronting faces of the nested components are joined in a continuous, uniform bond characterized by high thermal conductivity.

  1. High-temperature, high-pressure bonding of nested tubular metallic components

    DOEpatents

    Quinby, T.C.

    A tool is described for effecting high-temperature, high-compression bonding between the confronting faces of nested, tubular, metallic components. In a typical application, the tool is used to produce tubular target assemblies for irradiation in nuclear reactors or particle accelerators. The target assembly comprising a uranum foil and an aluninum-alloy substrate. The tool is composed of graphite. It comprises a tubular restraining member in which a mechanically expandable tubular core is mounted to form an annulus. The components to be bonded are mounted in nested relation in the annulus. The expandable core is formed of individually movable, axially elongated segments whose outer faces cooperatively define a cylindrical pressing surface and whose inner faces cooperatively define two opposed, inwardly tapered, axial bores. Tapered rams extend into the bores. The loaded tool is mounted in a conventional hot-press provided with evacuation means, heaters for maintaining its interior at bonding temperature, and hydraulic cylinders for maintaining a selected inwardly directed pressure on the tapered rams. With the hot-press evacuated and the loaded tool at the desired temperature, the cylinders are actuated to apply the selected pressure to the rams. The rams in turn expand the segmented core to maintain the nested components in compression against the restraining member. These conditions are maintained until the confronting faces of the nested components are joined in a continuous, uniform bond characterized by high thermal conductivity.

  2. Mars Life? - Microscopic Tubular Structures

    NASA Technical Reports Server (NTRS)

    1996-01-01

    This electron microscope image shows tubular structures of likely Martian origin. These structures are very similar in size and shape to extremely tiny microfossils found in some Earth rocks. This photograph is part of a report by a NASA research team published in the Aug. 16, 1996, issue of the journal Science. A two-year investigation by the team found organic molecules, mineral features characteristic of biological activity and possible microscopic fossils such as these inside of an ancient Martian rock that fell to Earth as a meteorite. The largest possible fossils are less than 1/100th the diameter of a human hair in size while most are ten times smaller.

  3. Mars Life? - Microscopic Tubular Structures

    NASA Technical Reports Server (NTRS)

    1996-01-01

    This electron microscope image shows extremely tiny tubular structures that are possible microscopic fossils of bacteria-like organisms that may have lived on Mars more than 3.6 billion years ago. A two-year investigation by a NASA research team found organic molecules, mineral features characteristic of biological activity and possible microscopic fossils such as these inside of an ancient Martian rock that fell to Earth as a meteorite. The largest possible fossils are less than 1/100th the diameter of a human hair in size while most are ten times smaller. The fossil-like structures were found in carbonate minerals formed along pre-existing fractures in the meteorite in a fashion similar to the way fossils occur in limestone on Earth, although on a microscopic scale.

  4. Expanded Dengue.

    PubMed

    Kadam, D B; Salvi, Sonali; Chandanwale, Ajay

    2016-07-01

    The World Health Organization (WHO) has coined the term expanded dengue to describe cases which do not fall into either dengue shock syndrome or dengue hemorrhagic fever. This has incorporated several atypical findings of dengue. Dengue virus has not been enlisted as a common etiological agent in several conditions like encephalitis, Guillain Barre syndrome. Moreover it is a great mimic of co-existing epidemics like Malaria, Chikungunya and Zika virus disease, which are also mosquito-borne diseases. The atypical manifestations noted in dengue can be mutisystemic and multifacetal. In clinical practice, the occurrence of atypical presentation should prompt us to investigate for dengue. Knowledge of expanded dengue helps to clinch the diagnosis of dengue early, especially during ongoing epidemics, avoiding further battery of investigations. Dengue has proved to be the epidemic with the ability to recur and has a diverse array of presentation as seen in large series from India, Srilanka, Indonesia and Taiwan. WHO has given the case definition of dengue fever in their comprehensive guidelines. Accordingly, a probable case is defined as acute febrile illness with two or more of any findings viz. headache, retro-orbital pain, myalgia, arthralgia, rash, hemorrhagic manifestations, leucopenia and supportive serology. There have been cases of patients admitted with fever, altered mentation with or without neck stiffness and pyramidal tract signs. Some had seizures or status epilepticus as presentation. When they were tested for serology, dengue was positive. After ruling out other causes, dengue remained the only culprit. We have come across varied presentations of dengue fever in clinical practice and the present article throws light on atypical manifestations of dengue. © Journal of the Association of Physicians of India 2011.

  5. Hyperammonaemia with distal renal tubular acidosis.

    PubMed

    Miller, S G; Schwartz, G J

    1997-11-01

    The case is reported of an infant with hyperammonaemia secondary to severe distal renal tubular acidosis. A clinical association between increased concentrations of ammonia in serum and renal tubular acidosis has not previously been described. In response to acidosis the infant's kidneys presumably increased ammonia synthesis but did not excrete ammonia, resulting in hyperammonaemia. The patient showed poor feeding, frequent vomiting, and failure to thrive, but did not have an inborn error of metabolism. This case report should alert doctors to consider renal tubular acidosis in the differential diagnosis of severely ill infants with metabolic acidosis and hyperammonaemia.

  6. Tubular discharge in a magnetic field

    SciTech Connect

    Karasev, V.Yu.; Semenov, R.I.; Chaika, M.P.

    1995-04-01

    Visual observations of Xe discharge glow in an axial magnetic field are described. Tubular discharge is detected in a narrow range of the parameters p, I, and H. A qualitative explanation of this effect is proposed.

  7. Treatment of well tubulars with gelatin

    SciTech Connect

    Lowther, F.E.

    1992-08-04

    This patent describes a method for treating a tubular in a well. It comprises: passing a mass of gelatin downward through the tubular; and passing the mass of gelating, upward in the well tubular toward the surface. This patent also describes a method of treating tubulars in a cased well having at least one string of tubing therein. It comprises positioning a mass in the annulus formed between the casing and the at least one string of tubing; and passing the mass downward in the annulus and in contact with both the inner wall of the casing and the outer wall of the tubing to deposit a protective layer on each of the walls.

  8. METHOD AND APPARATUS FOR FABRICATING TUBULAR UNITS

    DOEpatents

    Haldeman, G.W.

    1959-02-24

    A method and apparatus are described for fabricating tubular assemblies such as clad fuel elements for nuclear reactors. According to this method, a plurality of relatively short cylindrical slug-shaped members are inserted in an outer protective tubular jacket, and the assembly is passed through a reducing die to draw the outer tubular member into tight contact with the slug members, the slugs being automatically spaced with respect to each other and helium being inserted during the drawing operation to fill the spaces. The apparatus includes a pusher rod which functions to space the slugelements equidistantly by pushing on them in the direction of drawing but traveling at a slower rate than that of the tubular member.

  9. Genetics Home Reference: tubular aggregate myopathy

    MedlinePlus

    ... in both type I and type II fibers, forming clumps of tube-like structures called tubular aggregates. ... Hyun C, Woo JS, Park CS, Kim do H, Lee EH. Stromal interaction molecule 1 (STIM1) regulates ...

  10. Expandable mixing section gravel and cobble eductor

    DOEpatents

    Miller, Arthur L.; Krawza, Kenneth I.

    1997-01-01

    In a hydraulically powered pump for excavating and transporting slurries in hich it is immersed, the improvement of a gravel and cobble eductor including an expandable mixing section, comprising: a primary flow conduit that terminates in a nozzle that creates a water jet internal to a tubular mixing section of the pump when water pressure is applied from a primary supply flow; a tubular mixing section having a center line in alignment with the nozzle that creates a water jet; a mixing section/exit diffuser column that envelopes the flexible liner; and a secondary inlet conduit that forms an opening at a bas portion of the column and adjacent to the nozzle and water jet to receive water saturated gravel as a secondary flow that mixes with the primary flow inside of the mixing section to form a combined total flow that exits the mixing section and decelerates in the exit diffuser.

  11. 78 FR 37584 - U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-06-21

    ... Employment and Training Administration U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United States Steel Corporation, Mckeesport, Pennsylvania; Notice of Amended... workers of U.S. Steel Tubular Products, McKeesport Tubular Operations Division, a subsidiary of...

  12. Self-expanding/shrinking structures by 4D printing

    NASA Astrophysics Data System (ADS)

    Bodaghi, M.; Damanpack, A. R.; Liao, W. H.

    2016-10-01

    The aim of this paper is to create adaptive structures capable of self-expanding and self-shrinking by means of four-dimensional printing technology. An actuator unit is designed and fabricated directly by printing fibers of shape memory polymers (SMPs) in flexible beams with different arrangements. Experiments are conducted to determine thermo-mechanical material properties of the fabricated part revealing that the printing process introduced a strong anisotropy into the printed parts. The feasibility of the actuator unit with self-expanding and self-shrinking features is demonstrated experimentally. A phenomenological constitutive model together with analytical closed-form solutions are developed to replicate thermo-mechanical behaviors of SMPs. Governing equations of equilibrium are developed for printed structures based on the non-linear Green-Lagrange strain tensor and solved implementing a finite element method along with an iterative incremental Newton-Raphson scheme. The material-structural model is then applied to digitally design and print SMP adaptive lattices in planar and tubular shapes comprising a periodic arrangement of SMP actuator units that expand and then recover their original shape automatically. Numerical and experimental results reveal that the proposed planar lattice as meta-materials can be employed for plane actuators with self-expanding/shrinking features or as structural switches providing two different dynamic characteristics. It is also shown that the proposed tubular lattice with a self-expanding/shrinking mechanism can serve as tubular stents and grippers for bio-medical or piping applications.

  13. Buckling and lockup of tubulars in inclined wellbores

    SciTech Connect

    Wu, J.; Juvkam-Wold, H.C.

    1994-12-31

    This paper describes sinusoidal and helical buckling of tubulars in inclined wellbores and the ``lockup`` of tubulars due to buckling. The results show that tubular buckling starts from the tubular bottom in low-inclination wellbores, where axial compressive load is largest due to tubular weight. In high inclination wellbores it may start from the top portion of the tubular, where axial compressive load is largest due to frictional drag. This clarifies the confusion about whether or not tubulars buckle all at once, in the entire inclined wellbore. New sinusoidal and helical buckling load equations are presented to give better tubular buckling prediction in inclined wellbores (0--90 degrees). They show that the lower the wellbore inclination angle, the smaller the axial compressive load to initiate tubular buckling. But a certain non-zero axial compressive load is still needed to buckle the tubulars in vertical wellbores. When tubulars buckle helically, a large wall contact force will be generated. The `slack-off` weight at the surface will not be fully transmitted to the bottom of the tubulars due to the large resultant frictional drag. The ``lockup`` of tubulars, where the bottom load (bit weight) cannot be increased by slacking-off weight at the surface, usually is approached when a large portion of the tubular buckles helically in the wellbore.

  14. Buckling and lockup of tubulars in inclined wellbores

    SciTech Connect

    Wu, J.; Juvkam-Wold, H.C.

    1995-09-01

    This paper studies sinusoidal and helical buckling of tubulars in inclined wellbores and the ``lockup`` of tubulars due to buckling. The results show that tubular buckling starts from the tubular bottom in low-inclination wellbores, where the axial compressive load is largest due to tubular weight. In high-inclination wellbores it may start from the top portion of the tubular, where the axial compressive load is largest due to frictional drag. This clarifies the confusion on whether or not the tubular buckles at once on it entire length in inclined wellbores. New sinusoidal and helical buckling load equations are presented to better predict tubular buckling in inclined wellbores (0--90 deg). The lower the wellbore inclination angle, the smaller the axial compressive load required to initiate tubular buckling. However, a certain nonzero axial compressive load is still needed to buckle the tubulars in vertical wellbores. When tubulars buckle helically, a large wall contact force will be generated, and the ``slack-off`` weight at the surface will not be fully transmitted to the tubular bottom due to large resultant frictional drag. The ``lockup`` of tubulars may even occur, where the tubular bottom load cannot be increased by slacking-off weight at the surface.

  15. Tubular Colonic Duplication Presenting as Rectovestibular Fistula.

    PubMed

    Karkera, Parag J; Bendre, Pradnya; D'souza, Flavia; Ramchandra, Mukunda; Nage, Amol; Palse, Nitin

    2015-09-01

    Complete colonic duplication is a very rare congenital anomaly that may have different presentations according to its location and size. Complete colonic duplication can occur in about 15% of all gastrointestinal duplications. Double termination of tubular colonic duplication in the perineum is even more uncommon. We present a case of a Y-shaped tubular colonic duplication which presented with a rectovestibular fistula and a normal anus. Radiological evaluation and initial exploration for sigmoidostomy revealed duplicated colons with a common vascular supply. Endorectal mucosal resection of theduplicated distal segment till the colostomy site with division of the septum of the proximal segment and colostomy closure proved curative without compromise of the continence mechanism. Tubular colonic duplication should always be ruled out when a diagnosis of perineal canal is considered in cases of vestibular fistula alongwith a normal anus.

  16. Tubular Colonic Duplication Presenting as Rectovestibular Fistula

    PubMed Central

    Bendre, Pradnya; D'souza, Flavia; Ramchandra, Mukunda; Nage, Amol; Palse, Nitin

    2015-01-01

    Complete colonic duplication is a very rare congenital anomaly that may have different presentations according to its location and size. Complete colonic duplication can occur in about 15% of all gastrointestinal duplications. Double termination of tubular colonic duplication in the perineum is even more uncommon. We present a case of a Y-shaped tubular colonic duplication which presented with a rectovestibular fistula and a normal anus. Radiological evaluation and initial exploration for sigmoidostomy revealed duplicated colons with a common vascular supply. Endorectal mucosal resection of theduplicated distal segment till the colostomy site with division of the septum of the proximal segment and colostomy closure proved curative without compromise of the continence mechanism. Tubular colonic duplication should always be ruled out when a diagnosis of perineal canal is considered in cases of vestibular fistula alongwith a normal anus. PMID:26473141

  17. Deployable and retractable telescoping tubular structure development

    NASA Technical Reports Server (NTRS)

    Thomson, M. W.

    1994-01-01

    A new deployable and retractable telescoping boom capable of high deployed stiffness and strength is described. Deployment and retraction functions are controlled by simple, reliable, and fail-safe latches between the tubular segments. The latch and a BI-STEM (Storable Tubular Extendible Member) actuator work together to eliminate the need for the segments to overlap when deployed. This yields an unusually lightweight boom and compact launch configuration. An aluminum space-flight prototype with three joints displays zero structural deadband, low hysteresis, and high damping. The development approach and difficulties are discussed. Test results provide a joint model for sizing flight booms of any diameter and length.

  18. Tubular membrane bioreactors for biotechnological processes.

    PubMed

    Wolff, Christoph; Beutel, Sascha; Scheper, Thomas

    2013-02-01

    This article is an overview of bioreactors using tubular membranes such as hollow fibers or ceramic capillaries for cultivation processes. This diverse group of bioreactor is described here in regard to the membrane materials used, operational modes, and configurations. The typical advantages of this kind of system such as environments with low shear stress together with high cell densities and also disadvantages like poor oxygen supply are summed up. As the usage of tubular membrane bioreactors is not restricted to a certain organism, a brief overview of various applications covering nearly all types of cells from prokaryotic to eukaryotic cells is also given here.

  19. Tubular solid oxide fuel cell current collector

    DOEpatents

    Bischoff, Brian L.; Sutton, Theodore G.; Armstrong, Timothy R.

    2010-07-20

    An internal current collector for use inside a tubular solid oxide fuel cell (TSOFC) electrode comprises a tubular coil spring disposed concentrically within a TSOFC electrode and in firm uniform tangential electrical contact with the electrode inner surface. The current collector maximizes the contact area between the current collector and the electrode. The current collector is made of a metal that is electrically conductive and able to survive under the operational conditions of the fuel cell, i.e., the cathode in air, and the anode in fuel such as hydrogen, CO, CO.sub.2, H.sub.2O or H.sub.2S.

  20. The effect of wellbore curvature on tubular buckling and lockup

    SciTech Connect

    Wu, J.; Juvkam-Wold, H.C.

    1995-09-01

    This paper studies tubular buckling in curved wellbores (such as the build section of horizontal wells) and its effect on tubular ``lockup`` in horizontal or extended-reach wells. New buckling load equations are derived to properly predict tubular sinusoidal and helical buckling in such wellbores. The results show that the buckling loads to initiate sinusoidal and helical buckling to tubulars in curved wellbores are usually much larger than those in straight wellbores. This is because the curved wellbore tends to hold the axially compressed tubular against the outer-curve side of the wellbore. The tubular becomes less easy to buckle until higher axial compressive loads are applied. Less tubular lockup risk is then predicted for tubulars in horizontal or extended-reach wells by using the new buckling load equations. The new buckling loads in curved wellbores agree with those in straight wellbores when wellbore curvature approaches zero. Small-scale laboratory experiments also confirmed these theoretically derived buckling loads.

  1. Comparative physiology of renal tubular transport mechanisms.

    PubMed Central

    Long, S.; Giebisch, G.

    1979-01-01

    This manuscript discusses current concepts of glomerular filtration and tubular transport of sodium, water, potassium, and urinary acidification by vertebrate kidneys in a comparative context. Work in mammalian and amphibian nephrons receives major emphasis due to our interest in application of new techniques for investigation of cellular mechanisms; when available, data from other vertebrate classes are discussed. Images FIG. 3 PMID:395765

  2. Tubular Membrane Plant-Growth Unit

    NASA Technical Reports Server (NTRS)

    Dreschel, Thomas W.

    1992-01-01

    Hydroponic system controls nutrient solution for growing crops in space. Pump draws nutrient solution along inside of tubular membrane in pipe from reservoir, maintaining negative pressure in pipe. Roots of plants in slot extract nutrient through membrane within pipe. Crop plants such as wheat, rice, lettuce, tomatoes, soybeans, and beans grown successfully with system.

  3. Boron--epoxy tubular structure members

    NASA Technical Reports Server (NTRS)

    Shakespeare, W. B. J.; Nelson, P. T.; Lindkvist, E. C.

    1973-01-01

    Composite materials fabricate thin-walled tubular members which have same load-carrying capabilities as aluminum, titanium, or other metals, but are lighter. Interface between stepped end fitting and tube lends itself to attachments by primary as well as secondary bonding. Interlaminar shear and hoop stress buildup in attachment at end fitting is avoided.

  4. Tubular Membrane Plant-Growth Unit

    NASA Technical Reports Server (NTRS)

    Dreschel, Thomas W.

    1992-01-01

    Hydroponic system controls nutrient solution for growing crops in space. Pump draws nutrient solution along inside of tubular membrane in pipe from reservoir, maintaining negative pressure in pipe. Roots of plants in slot extract nutrient through membrane within pipe. Crop plants such as wheat, rice, lettuce, tomatoes, soybeans, and beans grown successfully with system.

  5. Drill pipes and casings utilizing multi-conduit tubulars

    SciTech Connect

    Curlett, H.B.

    1989-01-24

    A seal adapted for use with a multi-conduit well tubular, or the like, is described which consists of: a plate with fluid passages, each passage corresponding to an opening of a conduit of the multiconduit tubular, and a groove on the plate around each passage; and elastomer means partially embeddable into each groove for sealing each conduit of a tubular to a corresponding conduit of another similar tubular.

  6. TUBULAR AND FIBRILLAR COMPONENTS OF MATURE AND DIFFERENTIATING SIEVE ELEMENTS

    PubMed Central

    Cronshaw, James; Esau, Katherine

    1967-01-01

    An ontogenetic study of the sieve element protoplast of Nicotiana tabacum L. by light and electron microscopy has shown that the P-protein component (slime) arises as small groups of tubules in the cytoplasm. These subsequently enlarge to form comparatively large compact masses of 231 ± 2.5 (SE)A (n = 121) tubules, the P-protein bodies. During subsequent differentiation of the sieve element, the P-protein body disaggregates and the tubules become dispersed throughout the cell. This disaggregation occurs at about the same stage of differentiation of the sieve elements as the breakdown of the tonoplast and nucleus. Later, the tubules of P-protein are reorganized into smaller striated 149 ± 4.5 (SE)A (n = 43) fibrils which are characteristic of the mature sieve elements. The tubular P-protein component has been designated P1-protein and the striated fibrillar component P2-protein. In fixed material, the sieve-plate pores of mature sieve elements are filled with proteinaceous material which frays out into the cytoplasm as striated fibrils of P2-protein. Our observations are compatible with the view that the contents of contiguous mature sieve elements, including the P-protein, are continuous through the sieve-plate pores and that fixing solutions denature the proteins in the pores. They are converted into the electron-opaque material filling the pores. PMID:6050947

  7. Cam shaft with expanded hollow shaft

    SciTech Connect

    Hughes, R.W.; Brisson, R.H.; Brisson, G.R.

    1987-09-15

    This patent describes a camshaft having lobes with irregularly shaped apertures spaced along the longitudinal axis of a hollow tubular shaft. The lobes are orientated radially and axially in predetermined positions along the hollow tubular shaft. The camshaft is characterized by the walls of the hollow shaft expanded outwardly into aperture portions in irregular engagement with the interior of the apertures of the lobes and the walls expanded outwardly radially farther into ballooned portions between adjacent lobes to create corresponding outside and inside shoulders extending between the aperture and ballooned portions. The outside shoulders are disposed immediately adjacent and abutting each side of the lobes circumferentially about the apertures therein to secure the lobes axially upon the shaft, the inside shoulders disposed directly opposite the outside shoulders to that shoulder extend annularly about each end of each of the apertures and the ballooned portions extend between shoulders at adjacent lobes, the exterior circumferences of the lobes being furnished to closer tolerances than the interior apertures and the exterior surfaces of the lobes being positioned radially relative to the longitudinal axis with the radial positions of the interior apertures being offset among adjacent lobes.

  8. Construction of cucurbit[7]uril based tubular nanochannels incorporating associated [CdCl4]2- and lanthanide ions.

    PubMed

    Liang, Li-Li; Ni, Xin-Long; Zhao, Yi; Chen, Kai; Xiao, Xin; Zhang, Yun-Qian; Redshaw, Carl; Zhu, Qian-Jiang; Xue, Sai-Feng; Tao, Zhu

    2013-02-18

    There is intensive interest in the design of tubular channels because of their novel structures and various applications in a variety of research fields. Herein, we present a series of coordination-driven Q[7]-derived organic nanochannels using an anion-induced strategy under different acid concentrations. An advantage of this approach is that the tubular channels not only retain the original character of the parent macrocyclic receptors but also provide deep hydrophobic cavities possessing guest binding sites. Importantly, this study also emphasizes the efficiency of the macrocyclic receptors in providing a tubular hydrophobic cavity by directly stacking on top of one another with the anion-fixed and by acid control. The resulting combination of hydrogen bonding, C-H···Cl, and ion-dipole interactions helps to stabilize these supramolecular architectures. Such systems are both tunable and versatile and allow for interconvertibility in the construction of nanochannels based on these macrocyclic receptors.

  9. 78 FR 14361 - U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-03-05

    ... Employment and Training Administration U.S. Steel Tubular Products, Inc., Mckeesport Tubular Operations Division, Subsidiary of United States Steel Corporation, Mckeesport, PA; Notice of Initiation of...) filed on December 20, 2012 on behalf of workers of U.S. Steel Tubular Products, McKeesport...

  10. Monolithical aspherical beam expanding systems

    NASA Astrophysics Data System (ADS)

    Fuchs, U.

    2014-02-01

    In complex laser systems, such as those for material processing, and in basically all laboratory applications passive optical components are indispensable. Matching beam diameters is a common task, where Galileo type telescopes are preferred for beam expansion. Nevertheless researches and customers have found various limitations when using these systems. Some of them are the complicated adjustment, very small diameter for the incoming beam (1/e2), fixed and non-modifiable magnifications. Above that, diffraction-limitation is only assured within the optical design and not for the real world setup of the beam expanding system. Therefore, we will discuss limitations of currently used beam expanding systems to some extent. We will then present a new monolithical solution, which is based on the usage of only one aspherical component. It will be shown theoretically how the beam quality can be significantly improved by using aspherical lenses. As it is in the nature of things aspheres are working diffraction limited in the design, it will be shown how to combine up to five monolithical beam expanding systems and to keep the beam quality at diffraction limitation. Data of the culminated wavefront error will be presented. Last but not least insights will be given how beam expanding systems based on aspheres will help to use larger incoming beams and to reduce the overall length of such a system.

  11. [Ultrasound monitoring of consolidation processes in fractures of long tubular bones in osteosynthesis using bioactive implants].

    PubMed

    Zavadovskaia, V D; Popov, V P; Akbasheva, O E; Grigor'ev, E G; Druzhinina, T V

    2014-01-01

    To show the capabilities of ultrasound monitoring to assess consolidation processes in fractures of long tubular bones in the use of bioactive material-containing implants. Eighty-two (45.1%) patients whose bone fragments had been fixed with bioactive material-coated plates and 100 (54.9%) patients with bioinert material-coated ones were examined. Consolidation changes were estimated by ultrasound and X-ray studies 2, 4, 6, and 12 months after surgery. Bone metabolic changes were determined by US osteometry 2 months following surgery. Ultrasound data were compared with the biochemical markers: C-terminal telopeptide (CrossLaps) and osteocalcin. Ultrasound monitoring of the rates of consolidation and the time course of changes in bone strength versus the biochemical markers established the positive effect of bioactiveplates on the process of consolidation in fractures of tubular bones and made it possible to consider local osteopenic syndrome to be a prognostically favorable sign of timely callus formation.

  12. A Theoretical Analysis of the Capacitance of Muscle Fibers Using a Distributed Model of the Tubular System

    PubMed Central

    Eisenberg, R. S.; Vaughan, P. C.; Howell, J. N.

    1972-01-01

    A model is developed to predict the changes in total capacitance (i.e. total charge stored divided by surface membrane potential) of the tubular system of muscle fibers. The tubular system is represented as a punctated disc and the area of membrane across which current flows is represented as a punctated annulus, the capacitance of the muscle fiber being proportional to this area. The area can be determined from a distributed model of the tubular system, in which the only resistance to radial current flow is presumed to be in the lumen of the tubules. Calculations are made of the variation of capacitance expected as the conductivity of the bathing solution is varied. These calculations include the effects of fixed charge in the tubular lumen and the effects of changes in the shape and volume of the tubular system in solutions of low conductivity. The calculated results fail to fit comparable experimental data, although they do qualitatively account for the known variation of the radial spread of contraction with conductivity of the bathing medium. It is pointed out that the existence of a significant "access resistance" at the mouth of the tubules might explain the discrepancy between theory and experiment. PMID:5058964

  13. Basement membrane and apocrine epithelial antigens in differential diagnosis between tubular carcinoma and sclerosing adenosis of the breast.

    PubMed Central

    Ekblom, P; Miettinen, M; Forsman, L; Andersson, L C

    1984-01-01

    The distributions of defined basement membrane proteins in nine pure tubular carcinomas, 10 cases of sclerosing adenosis, and 15 ductal adenocarcinomas were compared. Sections of formalin fixed, paraffin embedded specimens were pretreated with pepsin and then immunostained for laminin, type IV collagen, and basement membrane proteoglycan, components specific for basement membranes. In sclerosing adenosis the tubules were surrounded by a continuous intact basement membrane composed of laminin, type IV collagen, and basement membrane proteoglycan, while the epithelium in the tubular carcinomas was negative for these proteins. The tumours were also analysed for the distribution of the apocrine epithelial antigen (AEA). In contrast to the benign lesions the tubular carcinomas expressed the AEA in a distinct non-polar fashion throughout the cell surface. In normal ducts and in adenosis the AEA was confined exclusively to the luminal surface. These studies suggest that there is a disturbance of cell polarity in tubular carcinomas. It is concluded that a combined analysis of basement membrane proteins and luminal surface antigens is a reliable and convenient way to differentiate between tubular carcinoma and sclerosing adenosis of the breast. Images PMID:6323547

  14. Tubular solid oxide fuel cell developments

    NASA Astrophysics Data System (ADS)

    Bratton, R. J.; Singh, P.

    An overview of the tubular solid oxide fuel cell (SOFC) development at Westinghouse is presented in this paper. The basic operating principles of SOFC's, evolution in tubular cell design and performance improvement, selection criteria for cell component materials, and cell processing techniques are discussed. The commercial goal is to develop a cell that can operate for 5 to 10 years. Results of cell test operated for more than 50,000 hours are presented. Since 1986, significant progress has been made in the evolution of cells with higher power, lower cost and improved thermal cyclic capability. Also in this period, successively larger multi-kilowatt electrical generators systems have been built and successfully operated for more than 7000 hours.

  15. Tubular Heart Pumping Mechanisms in Ciona Intestinalis

    NASA Astrophysics Data System (ADS)

    Battista, Nicholas; Miller, Laura

    2015-11-01

    In vertebrate embryogenesis, the first organ to form is the heart, beginning as a primitive heart tube. However, many invertebrates have tubular hearts from infancy through adulthood. Heart tubes have been described as peristaltic and impedance pumps. Impedance pumping assumes a single actuation point of contraction, while traditional peristalsis assumes a traveling wave of actuation. In addition to differences in flow, this inherently implies differences in the conduction system. It is possible to transition from pumping mechanism to the other with a change in the diffusivity of the action potential. In this work we consider the coupling between the fluid dynamics and electrophysiology of both mechanisms, within a basal chordate, the tunicate. Using CFD with a neuro-mechanical model of tubular pumping, we discuss implications of the both mechanisms. Furthermore, we discuss the implications of the pumping mechanism on evolution and development.

  16. Optical analysis of solar energy tubular absorbers.

    PubMed

    Saltiel, C; Sokolov, M

    1982-11-15

    The energy absorbed by a solar energy tubular receiver element for a single incident ray is derived. Two types of receiver elements were analyzed: (1) an inner tube with an absorbing coating surrounded by a semitransparent cover tube, and (2) a semitransparent inner tube filled with an absorbing fluid surrounded by a semitransparent cover tube. The formation of ray cascades in the semitransparent tubes is considered. A numerical simulation to investigate the influence of the angle of incidence, sizing, thickness, and coefficient of extinction of the tubes was performed. A comparison was made between receiver elements with and without cover tubes. Ray tracing analyses in which rays were followed within the tubular receiver element as well as throughout the rest of the collector were performed for parabolic and circular trough concentrating collectors.

  17. Study of hydrodynamic characteristics in tubular photobioreactors.

    PubMed

    Zhang, Qinghua; Wu, Xia; Xue, Shengzhang; Liang, Kehong; Cong, Wei

    2013-02-01

    In this work, the hydrodynamic characteristics in tubular photobioreactors with a series of helical static mixers built-in were numerically investigated using computational fluid dynamics (CFD). The influences of height and screw pitch of the helical static mixer and fluid inlet velocity on the cell trajectories, swirl numbers and energy consumption were examined. In order to verify the actual results for cultivation of microalgae, cultivation experiments of freshwater Chlorella sp. were carried out in photobioreactor with and without helical static mixer built-in at the same time. It was shown that with built-in helical static mixer, the mixing of fluid could be intensified, and the light/dark cycle could also be achieved which is of benefit for the growth of microalgae. The biomass productivity of Chlorella sp. in tubular photobioreactor with helical static mixer built-in was 37.26 % higher than that in the photobioreactor without helical static mixer.

  18. Targeting apoptosis in acute tubular injury.

    PubMed

    Ortiz, Alberto; Justo, Pilar; Sanz, Ana; Lorz, Corina; Egido, Jesús

    2003-10-15

    Recent research has shown that apoptosis and its regulatory mechanisms contribute to cell number regulation in acute renal failure. Acute tubular necrosis is the most frequent form of parenchymal acute renal failure. The main causes are ischemia-reperfusion, sepsis and nephrotoxic drugs. Exogenous factors such as nephrotoxic drugs and bacterial products, and endogenous factors such as lethal cytokines promote tubular cell apoptosis. Such diverse stimuli engage intracellular death pathways that in some cases are stimulus-specific. We now review the role of apoptosis in acute renal failure, the potential molecular targets of therapeutic intervention, the therapeutic weapons to modulate the activity of these targets and the few examples of therapeutic intervention on apoptosis.

  19. Pattern Selection in Growing Tubular Tissues

    NASA Astrophysics Data System (ADS)

    Ciarletta, P.; Balbi, V.; Kuhl, E.

    2014-12-01

    Tubular organs display a wide variety of surface morphologies including circumferential and longitudinal folds, square and hexagonal undulations, and finger-type protrusions. Surface morphology is closely correlated to tissue function and serves as a clinical indicator for physiological and pathological conditions, but the regulators of surface morphology remain poorly understood. Here, we explore the role of geometry and elasticity on the formation of surface patterns. We establish morphological phase diagrams for patterns selection and show that increasing the thickness or stiffness ratio between the outer and inner tubular layers induces a gradual transition from circumferential to longitudinal folding. Our results suggest that physical forces act as regulators during organogenesis and give rise to the characteristic circular folds in the esophagus, the longitudinal folds in the valves of Kerckring, the surface networks in villi, and the crypts in the large intestine.

  20. Tubular lap joints for wind turbine applications

    SciTech Connect

    Reedy, E.D. Jr.; Guess, T.R.

    1990-01-01

    A combined analytical/experimental study of the strength of thick- walled, adhesively bonded PMMA-to-aluminum and E-glass/epoxy composite-to-aluminum tubular lap joints under axial load has been conducted. Test results include strength and failure mode data. Moreover, strain gages placed along the length of the outer tubular adherend characterize load transfer from one adherend to the other. The strain gage data indicate that load transfer is nonuniform and that the relatively compliant PMMA has the shorter load transfer length. Strains determined by a finite element analysis of the tested joints are in excellent agreement with those measured. Calculated bond stresses are highest in the region of observed failure, and extensive bond yielding is predicted in the E- glass/epoxy composite-to-aluminum joint prior to joint failure. 4 refs., 13 figs., 1 tab.

  1. Tubular solid oxide fuel cell developments

    SciTech Connect

    Bratton, R.J.; Singh, P.

    1995-08-01

    An overview of the tubular solid oxide fuel cell (SOFC) development at Westinghouse is presented in this paper. The basic operating principles of SOFCs, evolution in tubular cell design and performance improvement, selection criteria for cell component materials, and cell processing techniques are discussed. The commercial goal is to develop a cell that can operate for 5 to 10 years. Results of cell test operated for more than 50,000 hours are presented. Since 1986, significant progress has been made in the evolution of cells with higher power, lower cost and improved thermal cyclic capability. Also in this period, successively larger multi-kilowatt electrical generators systems have been built and successfully operated for more than 7000 hours.

  2. Mechanisms in hyperkalemic renal tubular acidosis.

    PubMed

    Karet, Fiona E

    2009-02-01

    The form of renal tubular acidosis associated with hyperkalemia is usually attributable to real or apparent hypoaldosteronism. It is therefore a common feature in diabetes and a number of other conditions associated with underproduction of renin or aldosterone. In addition, the close relationship between potassium levels and ammonia production dictates that hyperkalemia per se can lead to acidosis. Here I describe the modern relationship between molecular function of the distal portion of the nephron, pathways of ammoniagenesis, and hyperkalemia.

  3. Self-Cleaning Tubular-Membrane Module

    NASA Technical Reports Server (NTRS)

    Sarbolouki, M. N.

    1983-01-01

    Tubular membranes made self-cleaning with aid of flow reversing valve. Sponge balls scrub membrane surfaces as they travel inside membrane tubes. A four-way flow-reversal valve automatically reverses flow in tubes at preset intervals so sponge balls reciprocate along tubes. Baskets at ends of tubes prevent sponges from escaping. Automatic cleaning feature added to existing membrane processing equipment with minimal modifications.

  4. Self-Cleaning Tubular-Membrane Module

    NASA Technical Reports Server (NTRS)

    Sarbolouki, M. N.

    1983-01-01

    Tubular membranes made self-cleaning with aid of flow reversing valve. Sponge balls scrub membrane surfaces as they travel inside membrane tubes. A four-way flow-reversal valve automatically reverses flow in tubes at preset intervals so sponge balls reciprocate along tubes. Baskets at ends of tubes prevent sponges from escaping. Automatic cleaning feature added to existing membrane processing equipment with minimal modifications.

  5. Stress concentration factors for dented tubular members

    SciTech Connect

    Buitrago, J.; Hsu, T.M.

    1996-12-31

    This paper presents results of a finite element (FE) study conducted on /tubular members with dents of various geometries, including dents with circular and elliptical cross-sectional shapes. The modeling and analysis procedures are discussed, and stress concentration factors (SCFs) are generated for axial and bending loads in the member. Equations that give SCFs as function of the member size and dent geometry are developed for both load conditions. Then, simplified equations are proposed for structural assessment purposes.

  6. Distal renal tubular acidosis with hereditary spherocytosis.

    PubMed

    Sinha, Rajiv; Agarwal, Indira; Bawazir, Waleed M; Bruce, Lesley J

    2013-07-01

    Hereditary spherocytosis (HS) and distal renal tubular acidosis (dRTA), although distinct entities, share the same protein i.e. the anion exchanger1 (AE1) protein. Despite this, their coexistence has been rarely reported. We hereby describe the largest family to date with co-existence of dRTA and HS and discuss the molecular basis for the co-inheritance of these conditions.

  7. Entropy in an expanding universe.

    PubMed

    Frautschi, S

    1982-08-13

    The question of how the observed evolution of organized structures from initial chaos in the expanding universe can be reconciled with the laws of statistical mechanics is studied, with emphasis on effects of the expansion and gravity. Some major sources of entropy increase are listed. An expanding "causal" region is defined in which the entropy, though increasing, tends to fall further and further behind its maximum possible value, thus allowing for the development of order. The related questions of whether entropy will continue increasing without limit in the future, and whether such increase in the form of Hawking radiation or radiation from positronium might enable life to maintain itself permanently, are considered. Attempts to find a scheme for preserving life based on solid structures fail because events such as quantum tunneling recurrently disorganize matter on a very long but fixed time scale, whereas all energy sources slow down progressively in an expanding universe. However, there remains hope that other modes of life capable of maintaining themselves permanently can be found.

  8. Entropy in an expanding universe

    NASA Astrophysics Data System (ADS)

    Frautschi, S.

    1982-08-01

    The evolution of organized structures from initial chaos in the expanding universe is demonstrated to be reconcilable with the second law of thermodynamics, and the effects of expansion and gravity on this problem are emphasized. Numerical estimates of the major sources of entropy increase are calculated, including the entropy increase in stars, the earth, black hole formation and decay, quantum tunneling of matter into black holes, positronium formation and decay, etc. An expanding 'causal' region is defined in which the entropy, though increasing, tends to fall further and further behind its maximum possible value, thus allowing for the development of order. That is, the classical heat death argument does not hold, because an expanding universe never achieves equilibrium and never reaches a constant temperature. Also considered are questions of whether entropy will continue increasing without limit in the future, and whether such increase in the form of Hawking radiation or radiation from positronium might enable life to maintain itself permanently. Attempts to find a scheme for preserving life based on solid structures fail because events such as quantum tunneling recurrently disorganize matter on a very long but fixed time scale.

  9. Behavior of horizontally curved steel tubular-flange bridge girders

    NASA Astrophysics Data System (ADS)

    Fan, Zhuo

    A new type of curved steel bridge girder, called a curved tubular-flange girder, with rectangular tubes as flanges, is proposed and studied in this dissertation. A curved steel tubular-flange girder has much larger torsional stiffness than a curved I-girder and less potential for cross section distortion than a curved box-girder. Therefore, it has potential advantages compared to curved I-girders and box-girders. A theoretical analysis method for systems of curved tubular-flange girders braced by cross frames is presented. A stress analysis method for tubular-flange girders is also provided. The behavior of curved tubular-flange girder systems is studied using the theoretical analysis method and compared to the behavior of the corresponding curved I-girder systems. A parametric study is performed using the theoretical analysis method to investigate the effects of geometric parameters on the behavior of curved tubular-flange girder systems. The studied parameters include tubular-flange width, tubular-flange depth, cross section depth, girder curvature, and the number of cross frames. Finite element analyses are conducted to verify the theoretical analysis method, to study the behavior of a curved tubular-flange girder system under dead load, and to study the behavior of a curved tubular-flange girder system with a composite concrete deck under dead and live load. The study shows that a curved tubular-flange girder system develops much less warping normal stress and cross section rotation than a corresponding curved I-girder system. The difference is especially significant for a single curved girder under its own weight, suggesting that curved tubular-flange girders would be much easier to transport and erect than curved I-girders. As girder curvature increases, the rate of increase in the stresses and displacements for a single I-girder is much greater than for a single curved tubular-flange girder. Smaller cross frame forces develop in a tubular-flange girder

  10. Cyclic process for producing methane in a tubular reactor with effective heat removal

    DOEpatents

    Frost, Albert C.; Yang, Chang-Lee

    1986-01-01

    Carbon monoxide-containing gas streams are converted to methane by a cyclic, essentially two-step process in which said carbon monoxide is disproportionated to form carbon dioxide and active surface carbon deposited on the surface of a catalyst, and said carbon is reacted with steam to form product methane and by-product carbon dioxide. The exothermic heat of reaction generated in each step is effectively removed during each complete cycle so as to avoid a build up of heat from cycle-to-cycle, with particularly advantageous techniques being employed for fixed bed, tubular and fluidized bed reactor operations.

  11. A simple auxetic tubular structure with tuneable mechanical properties

    NASA Astrophysics Data System (ADS)

    Ren, Xin; Shen, Jianhu; Ghaedizadeh, Arash; Tian, Hongqi; Xie, Yi Min

    2016-06-01

    Auxetic materials and structures are increasingly used in various fields because of their unusual properties. Auxetic tubular structures have been fabricated and studied due to their potential to be adopted as oesophageal stents where only tensile auxetic performance is required. However, studies on compressive mechanical properties of auxetic tubular structures are limited in the current literature. In this paper, we developed a simple tubular structure which exhibits auxetic behaviour in both compression and tension. This was achieved by extending a design concept recently proposed by the authors for generating 3D metallic auxetic metamaterials. Both compressive and tensile mechanical properties of the auxetic tubular structure were investigated. It was found that the methodology for generating 3D auxetic metamaterials could be effectively used to create auxetic tubular structures as well. By properly adjusting certain parameters, the mechanical properties of the designed auxetic tubular structure could be easily tuned.

  12. Effect of air flow on tubular solar still efficiency

    PubMed Central

    2013-01-01

    Background An experimental work was reported to estimate the increase in distillate yield for a compound parabolic concentrator-concentric tubular solar still (CPC-CTSS). The CPC dramatically increases the heating of the saline water. A novel idea was proposed to study the characteristic features of CPC for desalination to produce a large quantity of distillate yield. A rectangular basin of dimension 2 m × 0.025 m × 0.02 m was fabricated of copper and was placed at the focus of the CPC. This basin is covered by two cylindrical glass tubes of length 2 m with two different diameters of 0.02 m and 0.03 m. The experimental study was operated with two modes: without and with air flow between inner and outer tubes. The rate of air flow was fixed throughout the experiment at 4.5 m/s. On the basis of performance results, the water collection rate was 1445 ml/day without air flow and 2020 ml/day with air flow and the efficiencies were 16.2% and 18.9%, respectively. Findings The experimental study was operated with two modes: without and with air flow between inner and outer tubes. The rate of air flow was fixed throughout the experiment at 4.5 m/s. Conclusions On the basis of performance results, the water collection rate was 1445 ml/day without air flow and 2020 ml/day with air flow and the efficiencies were 16.2% and 18.9%, respectively. PMID:23587020

  13. Renal tubular acidosis: an immunopathological study on four patients

    PubMed Central

    Pasternack, A.; Linder, E.

    1970-01-01

    Renal biopsies and sera of four patients with distal renal tubular acidosis were examined. The findings consisted of immunoglobulin containing mononuclear cellular infiltrates around the distal tubules, bound immunoglobulin and complement in tubules. The sera of the patients contained antibodies reacting with various tissue antigens, among them renal tubular antigens. The results suggest that autoimmunity was involved in the pathogenesis of the renal tubular acidosis in these patients. ImagesFig. 1Fig. 2 PMID:5202740

  14. What Expands in an Expanding Universe?

    PubMed

    Pacheco, José A De Freitas

    2015-01-01

    In the present investigation, the possible effects of the expansion of the Universe on systems bonded either by gravitational or electromagnetic forces, are reconsidered. It will be shown that the acceleration (positive or negative) of the expanding background, is the determinant factor affecting planetary orbits and atomic sizes. In the presently accepted cosmology (ΛCDM) all bonded systems are expanding at a decreasing rate that tends to be zero as the universe enters in a de Sitter phase. It is worth mentioning that the estimated expansion rates are rather small and they can be neglected for all practical purposes.

  15. Hyaluronan in Tubular and Interstitial Nephrocalcinosis

    NASA Astrophysics Data System (ADS)

    Verkoelen, Carl F.

    2007-04-01

    Hyaluronan (HA) is the major glycosaminoglycan (GAG) component of the renal medullary interstitium. HA is extremely large (up to 104 kDa) and composed of thousands repeating disaccharides of glucuronic acid (GlcUA) and N-acetylglucosamine (GlcNAc). HA is synthesized by hyaluronan synthases (HASs) and degraded by hyaluronidases (Hyals). The production of HA by renomedullary interstitial cells is mediated by local osmolality. When excess water needs to be excreted, increased interstitial HA seems to antagonize water reabsorption, while the opposite occurs during water conservation. Hence, papillary interstitial HA is low and Hyal high during anti-diuresis, whereas during diuresis HA is high and Hyal low. The polyanion HA plays a role in the reabsorption of hypotonic fluid by immobilizing cations (Na+) via the carboxylate (COO-) groups of GlcUA. The binding of Ca2+ to anionic HA is probably also responsible for the fact that the papilla does not become a stone despite the extremely high interstitial phosphate and oxalate. HA is also an excellent crystal binding molecule. The expression of HA at the luminal surface of renal tubular cells leads to tubular nephrocalcinosis (tubular NC). Calcium staining methods (Von Kossa, Yasue) demonstrated that crystallization inhibitors cannot avoid the occasional precipitation of calcium phosphate in the papillary interstitium (interstitial NC). These crystals are probably immediately immobilized by the gel-like HA matrix. After ulcerating through the pelvic wall the calcified matrix becomes a Randall's plaque. The attachment of calcium oxalate crystals from the primary urine to plaque may ultimately lead to the development of clinical stones in the renal calyces (nephrolithiasis).

  16. Treatment of wastewater containing phenol using a tubular ceramic membrane bioreactor.

    PubMed

    Ersu, C B; Ong, S K

    2008-02-01

    The performance of a membrane bioreactor (MBR) with a tubular ceramic membrane for phenol removal was evaluated under varying hydraulic retention times (HRT) and a fixed sludge residence time (SRT) of 30 days. The tubular ceramic membrane was operated with a mode of 15 minutes of filtration followed by 15 seconds of permeate backwashing at a flux of 250 l m(-2)hr(-1) along with an extended backwashing of 30 seconds every 3 hours of operation, which maintained the transmembrane pressure (TMP) below 100 kPa. Using a simulated municipal wastewater with varying phenol concentrations, the chemical oxygen demand (COD) and phenol removals observed were greater than 88% with excellent suspended solids (SS) removal of 100% at low phenol concentrations (approx. 100 mg l(-1) of phenol). Step increases in phenol concentration showed that inhibition was observed between 600 to 800 mg l(-1) of phenol with decreased sludge production rate, mixed liquor suspended solids (MLSS) concentration, and removal performance. The sludge volume index (SVI) of the biomass increased to about 450 ml g(-1) for a phenol input concentration of 800 mg l(-1). When the phenol concentration was decreased to 100 mg l(-1), the ceramic tubular MBR was found to recover rapidly indicating that the MBR is a robust system retaining most of the biomass. Experimental runs using wastewater containing phenol indicated that the MBR can be operated safely without upsets for concentrations up to 600 mg l(-1) of phenol at 2-4 hours HRT and 30 days SRT.

  17. Renal tubular acidosis in chronic liver disease

    PubMed Central

    Golding, Peter L.

    1975-01-01

    Renal tubular acidosis of the gradient or classic type, thought to be due to a disorder of the distal tubule, has been found to occur in 32% of 117 patients with chronic liver disease. Whilst the cause of this disorder is probably multifactorial, immunological mechanisms are considered to play a major role. The presence of this disorder might well be a cause, rather than the result of, the various electrolyte abnormalities seen in patients with chronic liver disease. ImagesFig. 1Fig. 6 PMID:1234340

  18. Connection pad design for underwater tubular structures

    SciTech Connect

    Tsai, C.L.; Feng, Z.; Grantham, J.A. . Dept. of Welding Engineering); Soisson, L. )

    1990-01-01

    This paper reports on research to optimize the connection pad assembly design for different types of loading conditions, which means minimizing the stresses in the wet welds and maximizing the energy absorption of the connection pad. The tubular geometry of the connection pad does not allow stress field analysis by the traditional strength-of-materials method. The authors discuss how, using the finite element method to analyze the stress contributions and the energy absorbed by the pad, the optimum pad dimensions could be determined for different types of loads.

  19. Intraductal tubular neoplasms of the bile ducts.

    PubMed

    Katabi, Nora; Torres, Javiera; Klimstra, David S

    2012-11-01

    Although most tumors of the bile ducts are predominantly invasive, some have an exophytic pattern within the bile ducts; these intraductal papillary neoplasms usually have well-formed papillae at the microscopic level. In this study, however, we describe a novel type of intraductal neoplasm of the bile ducts with a predominantly tubular growth pattern and other distinctive features. Ten cases of biliary intraductal neoplasms with a predominantly tubular architecture were identified in the files of the Pathology Department at Memorial Sloan-Kettering Cancer Center from 1983 to 2006. For each of these cases we studied the clinical presentation, histologic and immunohistochemical features (9 cases only), and the clinical follow-up of the patients. Three male and 7 female patients (38 to 78 y) presented with obstructive jaundice or abdominal pain. Eight of the patients underwent a partial hepatectomy; 2 underwent a laparoscopic bile duct excision, followed by a pancreatoduodenectomy in one of them. The tumors range in size from 0.6 to 8.0 cm. The intraductal portions of the tumors (8 intrahepatic, 1 extrahepatic hilar, 1 common bile duct) were densely cellular and composed of back-to-back tubular glands and solid sheets with minimal papillary architecture. The cells were cuboidal to columnar with mild to moderate cytologic atypia. Foci of necrosis were present in the intraductal component in 6 cases. An extraductal invasive carcinoma component was present in 7 cases, composing <25% of the tumor in 4 cases, and >75% in 1 case. It was observed by immunohistochemical analysis that the tumor cells expressed CK19, CA19-9, MUC1, and MUC6 in most cases and that SMAD4 expression was retained. MUC2, MUC5AC, HepPar1, synaptophysin, chromogranin, p53, and CA125 were negative in all cases and most were negative for CEA-M and B72.3. Four patients were free of tumor recurrence after 7 to 85 months (average, 27 mo). Four patients with an invasive carcinoma component suffered

  20. Tubular solid oxide fuel cell development program

    SciTech Connect

    1995-08-01

    This paper presents an overview of the Westinghouse Solid Oxide Fuel Cell (SOFC) development activities and current program status. The Westinghouse goal is to develop a cost effective cell that can operate for 50,000 to 100,000 hours. Progress toward this goal will be discussed and test results presented for multiple single cell tests which have now successfully exceeded 56,000 hours of continuous power operation at temperature. Results of development efforts to reduce cost and increase power output of tubular SOFCs are described.

  1. Distal Renal Tubular Acidosis and Calcium Nephrolithiasis

    NASA Astrophysics Data System (ADS)

    Moe, Orson W.; Fuster, Daniel G.; Xie, Xiao-Song

    2008-09-01

    Calcium stones are commonly encountered in patients with congenital distal renal tubular acidosis, a disease of renal acidification caused by mutations in either the vacuolar H+-ATPase (B1 or a4 subunit), anion exchanger-1, or carbonic anhydrase II. Based on the existing database, we present two hypotheses. First, heterozygotes with mutations in B1 subunit of H+-ATPase are not normal but may harbor biochemical abnormalities such as renal acidification defects, hypercalciuria, and hypocitraturia which can predispose them to kidney stone formation. Second, we propose at least two mechanisms by which mutant B1 subunit can impair H+-ATPase: defective pump assembly and defective pump activity.

  2. Mesangial cells initiate compensatory tubular cell hypertrophy.

    PubMed

    Sinuani, I; Beberashvili, I; Averbukh, Z; Cohn, M; Gitelman, I; Weissgarten, J

    2010-01-01

    Unilateral nephrectomy results in compensatory renal growth, in which both the size and the functional capacity of the remaining kidney are increased. The functional adaptation to the removal of the contralateral kidney consists mostly of an increase in the glomerular filtration rate of the remaining kidney, and hypertrophy of cells comprising the nephron, mainly of the proximal tubular cells. Although the phenomenon of single kidney hypertrophy has been known for the past thousand years and despite intensive research over the past century, the mechanism of this process still remains unclear. The present article reviews the role of mesangial cells in compensatory renal hypertrophy. 2010 S. Karger AG, Basel.

  3. A Tubular Biomaterial Construct Exhibiting a Negative Poisson’s Ratio

    PubMed Central

    Lee, Jin Woo; Soman, Pranav; Park, Jeong Hun; Chen, Shaochen; Cho, Dong-Woo

    2016-01-01

    Developing functional small-diameter vascular grafts is an important objective in tissue engineering research. In this study, we address the problem of compliance mismatch by designing and developing a 3D tubular construct that has a negative Poisson’s ratio νxy (NPR). NPR constructs have the unique ability to expand transversely when pulled axially, thereby resulting in a highly-compliant tubular construct. In this work, we used projection stereolithography to 3D-print a planar NPR sheet composed of photosensitive poly(ethylene) glycol diacrylate biomaterial. We used a step-lithography exposure and a stitch process to scale up the projection printing process, and used the cut-missing rib unit design to develop a centimeter-scale NPR sheet, which was rolled up to form a tubular construct. The constructs had Poisson’s ratios of -0.6 ≤ νxy ≤ -0.1. The NPR construct also supports higher cellular adhesion than does the construct that has positive νxy. Our NPR design offers a significant advance in the development of highly-compliant vascular grafts. PMID:27232181

  4. Tubular Obstruction Leads to Progressive Proximal Tubular Injury and Atubular Glomeruli in Polycystic Kidney Disease

    PubMed Central

    Galarreta, Carolina I.; Grantham, Jared J.; Forbes, Michael S.; Maser, Robin L.; Wallace, Darren P.; Chevalier, Robert L.

    2015-01-01

    In polycystic kidney disease (PKD), renal parenchyma is destroyed by cysts, hypothesized to obstruct nephrons. A signature of unilateral ureteral obstruction, proximal tubular atrophy leads to formation of atubular glomeruli. To determine whether this process occurs in PKD, kidneys from pcy mice (moderately progressive PKD), kidneys from cpk mice (rapidly progressive PKD), and human autosomal dominant PKD were examined in early and late stages. Integrity of the glomerulotubular junction and proximal tubular mass were determined in sections stained with Lotus tetragonolobus lectin. Development of proximal tubular atrophy and atubular glomeruli was determined in serial sections of individual glomeruli. In pcy mice, most glomerulotubular junctions were normal at 20 weeks, but by 30 weeks, 56% were atrophic and 25% of glomeruli were atubular; glomerulotubular junction integrity decreased with increasing cyst area (r = 0.83, P < 0.05). In cpk mice, all glomerulotubular junctions were normal at 10 days, but by 19 days, 26% had become abnormal. In early-stage autosomal dominant PKD kidneys, 50% of glomeruli were atubular or attached to atrophic tubules; in advanced disease, 100% were abnormal. Thus, proximal tubular injury in cystic kidneys closely parallels that observed with ureteral obstruction. These findings support the hypothesis that, in renal cystic disorders, cyst-dependent obstruction of medullary and cortical tubules initiates a process culminating in widespread destruction of proximal convoluted tubules at the glomerulotubular junction. PMID:24815352

  5. Method and tool for expanding tubular members by electro-hydraulic forming

    DOEpatents

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2013-10-29

    An electro-hydraulic forming tool having one or more electrodes for forming parts with sharp corners. The electrodes may be moved and sequentially discharged several times to form various areas of the tube. Alternatively, a plurality of electrodes may be provided that are provided within an insulating tube that defines a charge area opening. The insulating tube is moved to locate the charge area opening adjacent one of the electrodes to form spaced locations on a preform. In other embodiments, a filament wire is provided in a cartridge or supported by an insulative support.

  6. Role of the glomerular-tubular imbalance with tubular predominance in the arterial hypertension pathophysiology.

    PubMed

    Fox, María Ofelia Barber; Gutiérrez, Ernesto Barber

    2013-09-01

    In previous investigations we caused renal tubular reabsorption preponderance relating to the glomerular filtration (Glomerular-tubular imbalance) and we observed that this fact conducted to volume expansion and development of arterial hypertension, in rats that previously were normotens. We based on this evidence and other which are reflected in the literature arrived at the following hypothesis: a greater proportion of tubular reabsorption relating to the filtered volume is the base of the establishment of the glomerular-tubular imbalance with tubular predominance (GTI-T), which favors to the Na(+)-fluid retention and volume expansion. All of which conduced to arterial hypertension. These facts explain a primary hypertensive role of the kidney, consistent with the results of renal transplants performed in different lines of hypertensive rats and their respective controls and in humans: hypertension can be transferred with the kidney. GTI-T aims to be, a common phenomenon involved in the hypertension development in the multiple ways which is manifested the hypertensive syndrome. In secondary hypertension, GTI-T is caused by significant disruptions of hormone secretions that control renal function, or obvious vascular or parenchymal damage of these organs. In primary hypertension the GTI-T has less obvious causes inherently developed in the kidney, including humoral, cellular and subcellular mechanisms, which may insidiously manifest under environmental factors influence, resulting in insidious development of hypertension. This would explain the state of prehypertension that these individuals suffer. So it has great importance to study GTI-T before the hypertension is established, because when hypertensive state is established, other mechanisms are installed and they contribute to maintain the hypertension. Our hypothesis may explaining the inability of the kidneys to excrete salt and water in hypertension, as Guyton and colleagues have expressed and constitutes a

  7. Gravity-flow open tubular cation chromatography.

    PubMed

    Kubán, Petr; Pelcová, Pavlína; Kubán, Vlastimil; Klakurková, Lenka; Dasgupta, Purnendu K

    2008-08-01

    We describe ion chromatography (IC) on open tubular cation exchange columns with a controllable capacity multilayered stationary phase architecture. The columns of relatively large bore (75 microm id) are fabricated by coating fused-silica capillaries with multiple layers of poly(butadiene-maleic acid) (PBMA) copolymer and crosslinking the deposited layers by thermally initiated radical polymerisation. Column capacity increases in a predictable manner with increase in the number of successively coated layers. Gravity flow with a modest head (< 2 m) can provide the desired separations within a reasonable period. We provide a minimalist configuration where no suppression is used, the sample is injected hydrodynamically as in CE, and detection is accomplished by an inexpensive homebuilt contactless conductivity detector or a capacitance to voltage digital converter. A 1 m long 75 microm bore column coated with two layers of PBMA allows gravity-flow open tubular IC to separate four alkali cations in < 10 min with a 1 mM tartaric acid (TA) eluent. Simultaneous separation of alkali and alkaline earth metal cations can be accomplished in less than 25 min using 1.75 mM pyridinedicarboxylic acid as an eluent. Contactless conductometric detection (C(4)D) allows LODs down to 150 nmol/L, corresponding to 30 fmol injections. Analysis of real water samples is demonstrated.

  8. Tubular photobioreactor design for algal cultures.

    PubMed

    Molina, E; Fernández, J; Acién, F G; Chisti, Y

    2001-12-28

    Principles of fluid mechanics, gas-liquid mass transfer, and irradiance controlled algal growth are integrated into a method for designing tubular photobioreactors in which the culture is circulated by an airlift pump. A 0.2 m(3) photobioreactor designed using the proposed approach was proved in continuous outdoor culture of the microalga Phaeodactylum tricornutum. The culture performance was assessed under various conditions of irradiance, dilution rates and liquid velocities through the tubular solar collector. A biomass productivity of 1.90 g l(-1) d(-1) (or 32 g m(-2) d(-1)) could be obtained at a dilution rate of 0.04 h(-1). Photoinhibition was observed during hours of peak irradiance; the photosynthetic activity of the cells recovered a few hours later. Linear liquid velocities of 0.50 and 0.35 m s(-1) in the solar collector gave similar biomass productivities, but the culture collapsed at lower velocities. The effect of dissolved oxygen concentration on productivity was quantified in indoor conditions; dissolved oxygen levels higher or lower than air saturation values reduced productivity. Under outdoor conditions, for given levels of oxygen supersaturation, the productivity decline was greater outdoors than indoors, suggesting that under intense outdoor illumination photooxidation contributed to loss of productivity in comparison with productivity loss due to oxygen inhibition alone. Dissolved oxygen values at the outlet of solar collector tube were up to 400% of air saturation.

  9. Tubular solid oxide fuel cell prospect

    SciTech Connect

    Veyo, S.E.

    1996-05-01

    Driven by technological achievement and rational projection of commercial product cost, expectations for tubular SOFC commercialization are improving. Tubular SOFCs have surpassed 7 yrs operation and have recently demonstrated remarkable toughness in thermal cycling. Customer-owned systems with 25 kW stacks utilizing air electrode supported (AES) cells continue to operate directly on natural gas without degradation after multiple thermal cycles and over 4000 hrs operation. AES cell operation at elevated pressure corroborates theoretical estimates of performance gain without evidence of deleterious effect. Commercial class AES cell of 22 mm dia and 1500 mm length, is now in production for application to 100 kW, 50% efficient (ac/LHV), atmospheric pressure systems. This same cell applied to pressurized systems in combination with conventional turbo machinery (gas turbines) can yield an efficiency approaching 70% for power plants as small as 5 MW. Total installed system cost for commercial 5 MW SOFC/CT units for distributed power generation and on-site cogeneration should approach $1000/kW. A major challenge is formation of funded projects to demonstrate at the turn of the century prototype MW class SOFC/CT combined cycle power plants and to complete the development of commercial fuel cell manufacturing processes.

  10. The effect of wellbore curvature on tubular buckling and lockup

    SciTech Connect

    Wu, J.; Juvkam-Wold, H.C.

    1994-12-31

    This paper describes sinusoidal and helical buckling of tubulars in curved wellbores (such as the build section of horizontal wells) and the effect on `lockup` of tubulars when drilling horizontal or extended-reach wells. New buckling load equations are derived to properly predict sinusoidal and helical buckling of tubulars in such wellbores. The results show that the buckling loads to ultimate sinusoidal and helical buckling of tubulars in curved wellbores are usually much larger than those in straight wellbores. This is because the curved wellbore tends to hold the axially compressed tubular against the outer-curve side of the wellbore. It is difficult to buckle a tubular into a sinusoidal or helical shape in curved wellbores, unless a very high axial compressive load is applied. The risk of tubular lockup when chilling horizontal or extended-reach wells is therefore reduced, because there is likely to be very little, if any, tubular buckling in the curved wellbore. The buckling loads derived in this paper also agree with those in straight wellbores when wellbore curvature approaches zero. Small scale laboratory experiments confirmed the theoretically derived buckling loads.

  11. The tubular "cookie cutter" bullet: a unique projectile.

    PubMed

    Nolte, K B

    1990-11-01

    Recently marketed PMC (Pan Metal Corporation) Ultramag tubular hollow point ammunition is uniquely constructed with a two-part projectile composed of a tubular copper bullet and a Teflon wad. A fatal gunshot wound with this ammunition is described. A unique radiographic pattern and the results of test firing are also presented.

  12. Flexible tubular replicas of abdominal aortic aneurysms.

    PubMed

    Berry, E; Marsden, A; Dalgarno, K W; Kessel, D; Scott, D J A

    2002-01-01

    The aim of this study was to manufacture life-size, flexible, tubular replicas of human abdominal aortic aneurysms and the associated vasculature, suitable for use in a training simulator for endovascular procedures. Selective laser sintering was used to create a geometrically correct master model for each of ten anatomical variations. The masters were used to generate flexible latex replicas. The use of the replicas in the training simulator was demonstrated. In total ten silicone rubber models were produced. When connected into the training simulator and perfused at arterial pressure it was possible to deploy an endovascular stent under fluoroscopic control and to perform angiography. The study has shown that conventional rapid prototyping technology can be used to manufacture flexible, radiolucent replicas which provide a realistic training environment for endovascular procedures.

  13. Inherited renal tubular defects with hypokalemia.

    PubMed

    Muthukrishnan, J; Modi, K D; Kumar, P Jagdish; Jha, Ratan

    2009-03-01

    Bartter's and Gitelman's syndrome are two ends of a spectrum of inherited renal tubular disorders that present with hypokalemic metabolic alkalosis of varying severity. Clinical features and associated calcium and magnesium ion abnormalities are used to diagnose these cases after excluding other commoner causes. We report on two cases, the first being a young boy, born of pregnancy complicated by polyhydramnios, who had classical dysmorphic features, polyuria, hypokalemia and hypercalciuria and was diagnosed as having Bartter's syndrome. The second patient is a lady who had recurrent tetany as the only manifestation of Gitelman's syndrome, which is an unusual presentation. Potassium replacement with supplementation of other deficient ions led to satisfactory clinical and biochemical response.

  14. Reversal of Thermoelectric Current in Tubular Nanowires

    NASA Astrophysics Data System (ADS)

    Erlingsson, Sigurdur I.; Manolescu, Andrei; Nemnes, George Alexandru; Bardarson, Jens H.; Sanchez, David

    2017-07-01

    We calculate the charge current generated by a temperature bias between the two ends of a tubular nanowire. We show that in the presence of a transversal magnetic field the current can change sign; i.e., electrons can either flow from the hot to the cold reservoir, or in the opposite direction, when the temperature bias increases. This behavior occurs when the magnetic field is sufficiently strong, such that Landau and snaking states are created, and the energy dispersion is nonmonotonic with respect to the longitudinal wave vector. The sign reversal can survive in the presence of impurities. We predict this result for core-shell nanowires, for uniform nanowires with surface states due to the Fermi level pinning, and for topological insulator nanowires.

  15. Renal tubular secretion of glutathione (GSH)

    SciTech Connect

    Scott, R.D.; Curthoys, N.P.

    1986-05-01

    The rapid turnover of renal GSH may require its secretion into the tubular lumen. Renal clearance of plasma GSH was measured in rats anesthetized with Inactin and infused with (/sup 3/H)inulin. Renal ..gamma..-glutamyltranspeptidase (..gamma..GT) was then inactivated (> 97%) by infusion of acivicin and samples were collected for 6-7 h. By 4.5 h arterial and urinary GSH increased from 5..mu..M and 1.3 n mol/h to 23 ..mu..M and 2400-7000 nmol/h, respectively. The ratio of urinary GSH to filtered load increased from < 0.01 to 0.7-2.6. When renal GSH was decreased to 30% of normal by pretreating rats with buthionine sulfoximine (BSO), the subsequent inactivation of ..gamma..GT caused only a slight increase in arterial GSH and urinary GSH increased to only 400-600 nmol/h (60-70% of filtered load). The amount of GSH filtered by the kidney was reduced by initially treating a rat with acivicin and 3 h later infusing purified ..gamma..GT (0.2 mg/h) to degrade plasma GSH. Just before infusion of ..gamma..GT, arterial GSH was 23 ..mu..M and urinary GSH was equal to 90% of the filtered load. At 1 h after infusion of ..gamma..GT, arterial GSH decreased to 0.3 ..mu..M, whereas urinary GSH remained elevated (1200-1800 nmol/h) and now equalled 10-20 times the filtered load. When similar experiments were carried out in BSO treated rats, maximal urinary GSH was reduced to 200 nmol/h, a value that was still 10 times the filtered load. Therefore, secreted GSH constitutes a significant portion of the GSH that is normally catabolized within the tubular lumen.

  16. Functionalized expanded porphyrins

    DOEpatents

    Sessler, Jonathan L; Pantos, Patricia J

    2013-11-12

    Disclosed are functionalized expanded porphyrins that can be used as spectrometric sensors for high-valent actinide cations. The disclosed functionalized expanded porphyrins have the advantage over unfunctionalized systems in that they can be immobilized via covalent attachment to a solid support comprising an inorganic or organic polymer or other common substrates. Substrates comprising the disclosed functionalized expanded porphyrins are also disclosed. Further, disclosed are methods of making the disclosed compounds (immobilized and free), methods of using them as sensors to detect high valent actinides, devices that comprise the disclosed compounds, and kits.

  17. Expanding the Universe

    NASA Astrophysics Data System (ADS)

    Sterken, Christiaan; Leedjärv, Laurits; Tempel, Elmo

    2011-12-01

    Proceedings of the International Conference EXPANDING THE UNIVERSE, On the occasion of the 200th anniversary of the Tartu Observatory, Tartu, Estonia 2011 April 27-29. C. Sterken, L. Leedjarv, E. Tempel (Eds.)

  18. The determinants of transverse tubular volume in resting skeletal muscle

    PubMed Central

    Sim, Jingwei; Fraser, James A

    2014-01-01

    The transverse tubular (t)-system of skeletal muscle couples sarcolemmal electrical excitation with contraction deep within the fibre. Exercise, pathology and the composition of the extracellular fluid (ECF) can alter t-system volume (t-volume). T-volume changes are thought to contribute to fatigue, rhabdomyolysis and disruption of excitation–contraction coupling. However, mechanisms that underlie t-volume changes are poorly understood. A multicompartment, history-independent computer model of rat skeletal muscle was developed to define the minimum conditions for t-volume stability. It was found that the t-system tends to swell due to net ionic fluxes from the ECF across the access resistance. However, a stable t-volume is possible when this is offset by a net efflux from the t-system to the cell and thence to the ECF, forming a net ion cycle ECF→t-system→sarcoplasm→ECF that ultimately depends on Na+/K+-ATPase activity. Membrane properties that maximize this circuit flux decrease t-volume, including PNa(t) > PNa(s), PK(t) < PK(s) and N(t) < N(s) [P, permeability; N, Na+/K+-ATPase density; (t), t-system membrane; (s), sarcolemma]. Hydrostatic pressures, fixed charges and/or osmoles in the t-system can influence the magnitude of t-volume changes that result from alterations in this circuit flux. Using a parameter set derived from literature values where possible, this novel theory of t-volume was tested against data from previous experiments where t-volume was measured during manipulations of ECF composition. Predicted t-volume changes correlated satisfactorily. The present work provides a robust, unifying theoretical framework for understanding the determinants of t-volume. PMID:25384782

  19. The Dynamical Evolution of A Tubular Leonid Persistent Train

    NASA Technical Reports Server (NTRS)

    Jenniskens, Peter; Nugent, David; Plane, John M. C.; DeVincenzi, Donald L. (Technical Monitor)

    2000-01-01

    The dynamical evolution of the persistent train of a bright Leonid meteor was examined for evidence of the source of the luminosity and the physical conditions in the meteor path. The train consisted of two parallel somewhat diffuse luminous tracks, interpreted as the walls of a tube. A general lack of wind shear along the trail allowed these structures to remain intact for nearly 200 s, from which it was possible to determine that the tubular structure expanded at a near constant 10.5 m/s, independent of altitude between 86 and 97 km. An initial fast decrease of train intensity below 90 km was followed by an increase in intensity and then a gradual decrease at longer times, whereas at high attitudes the integrated intensity was nearly constant with time. These results are compared to a model that describes the dynamical evolution of the train by diffusion, following an initial rapid expansion of the hot gaseous trail behind the meteoroid. The train luminosity is produced by O ((sup 1)S) emission at 557 nm, driven by elevated atomic O levels produced by the meteor impact, as well as chemiluminescent reactions of the ablated metals Na and Fe with O3. Ozone is rapidly removed within the train, both by thermal decomposition and catalytic destruction by the metallic species. Hence, the brightest emission occurs at the edge of the train between outwardly diffusing metallic species and inwardly diffusing O3. Although the model is able to account plausibly for a number of characteristic features of the train evolution, significant discrepancies remain that cannot easily be resolved.

  20. The Dynamical Evolution of a Tubular Leonid Persistent Train

    NASA Astrophysics Data System (ADS)

    Jenniskens, Peter; Nugent, David; Plane, John M. C.

    The dynamical evolution of the persistent train of a bright Leonid meteor was examined for evidence of the source of the luminosity and the physical conditions in the meteor path. The train consisted of two parallel somewhat diffuse luminous tracks, interpreted as the walls of a tube. A general lack of wind shear along the trail allowed these structures to remain intact for nearly 200 s, from which it was possible to determine that the tubular structure expanded at a near constant 10.5 ms^-1, independent of altitude between 86 and 97 km. An initial fast decrease of train intensity below 90 km was followed by an increase in intensity and then a gradual decrease at longer times, whereas at high altitudes the integrated intensity was nearly constant with time. These results are compared to a model that describes the dynamical evolution of the train by diffusion, following an initial rapid expansion of the hot gaseous trail behind the meteoroid. The train luminosity is produced by O (^1S) emission at 557 nm, driven by elevated atomic O levels produced by the meteor impact, as well as chemiluminescent reactions of the ablated metals Na and Fe with O_3. Ozone is rapidly removed within the train, both by thermal decomposition and catalytic destruction by the metallic species. Hence, the brightest emission occurs at the edge of the train between outwardly diffusing metallic species and inwardly diffusing O_3. Although the model is able to account plausibly for a number of characteristic features of the train evolution, significant discrepancies remain that cannot casily be resolved.

  1. Adsorption Isotherm Studies of CH4 on Tubular WS2

    NASA Astrophysics Data System (ADS)

    Mackie, Erica; Alkhafaji, Mazin; Migone, Aldo; Galvan, Donald

    1998-03-01

    We have measured adsorption-desorption isotherm cycles of CH4 on both tubular and non-tubular WS2. The tubular WS2 was produced (by Galvan et al.)(D.H.Galvan, R.Rangel and G.A.Nunez, submitted to Appl. Phys. Lett.) by electron irradiation of WS2 powder. The irradiation process results in WS2 tubes and paricles nanometric in diameter. The WS2 powder was manufactured by Alfa Aesar. We measured the surface area of both types of WS2 samples. We found an increase in surface area from 0.46 m^2/g for the non-irradiated, to 2.6 m^2/g for the irradiated WS2. We will present adsorption-desorption cycles for tubular and non-tubular WS2 subjected to different activation treatments: soaking in nitric acid, and, heating under vacuum to 700 C. Sufrace area comparisons between non-tubular and tubular, and between activated and non-activated WS2, will identify increases due to the potential opening of the tubes, the irradiation process itself, and/or the activation treatment.

  2. The endoplasmic reticulum of mung-bean cotyledons: Quantitative morphology of cisternal and tubular ER during seedling growth.

    PubMed

    Harris, N; Chrispeels, M J

    1980-04-01

    The ultrastructure of the endoplasmic reticulum (ER) in storage parenchyma cells in the cotyledons of mung beans (Vigna radiata L.) was examined during germination and seedling growth. Two different methods were used to visualize the ER: thin (0.08 μm) sections of tissue fixed in formaldehyde and glutaraldehyde and post-fixed with osmium tetroxide, and thick (1 μm) sections of tissue fixed in buffered aldehyde and post-fixed with zinc iodide-osmium tetroxide (ZIO). Changes in relative amounts of ER were quantified by morphometry (stereology).The ER occurs in two forms: a cisternal form with associated ribosomes which can be seen at all stages from imbibition to cotyledon senescence, and a tubular form which initially has associated ribosomes. Stereoscopic images of thick sections of cotyledons of 2-day-old seedlings show that the tubular ER consists of a three-dimensional array of interconnecting tubules which have numerous connections with the cisternal ER. The network of tubules and cisternae extends throughout the cytoplasm enveloping the protein bodies. Germination and seedling growth are accompanied by a reduction in the total volume occupied by the ER. This reduction is the result of a preferential loss of tubular ER and occurs largely before protein mobilization. Cisternal ER decreases during the first 48 h of imbibition and seedling growth, but storage cells subsequently show an increase in cisternal ER just prior to and during the period of protein mobilization. Cisternal ER remains conspicuous during the last phase of reserve mobilization when starch is broken down and the cells are starting autophagy.

  3. AKI in early sepsis is a continuum from transient AKI without tubular damage over transient AKI with minor tubular damage to intrinsic AKI with severe tubular damage.

    PubMed

    Vanmassenhove, J; Glorieux, G; Hoste, E; Dhondt, A; Vanholder, R; Van Biesen, W

    2014-10-01

    The pathophysiology of septic acute kidney injury (AKI) is incompletely understood, and there is controversy on the role of renal hypoperfusion in early sepsis. We hypothesized that renal hypoperfusion plays a role in early sepsis and that there is a continuum between transient AKI without tubular damage, transient AKI with minor tubular damage, and intrinsic AKI. A total of 107 consecutive patients with sepsis were included. Fractional excretion of sodium (FENa), urinary, and serum neutrophil gelatinase-associated lipocalin were measured at admission (T0) and 4 h (T4) and 24 h later (T24). Patients were classified according to FENa quartiles (FENaQ). Transient and intrinsic AKI were respectively defined as AKI that did or did not recover to no AKI in the following 5 days. A total of 57 developed transient AKI, 22 developed intrinsic AKI, and 28 did not have AKI. Of the ten patients with transient AKI classified in the two lowest FENa quartiles (FENa < 0.36 %) and without signs of local tubular damage, seven still did not show signs of tubular damage 24 h later. Also, 50 % of patients with intrinsic AKI classified in the same FENaQ did not show signs of local tubular damage at admission but did so 24 h later. There is a continuum between transient AKI without tubular damage, transient AKI with minor tubular damage, and intrinsic AKI in sepsis. Renal hypoperfusion seems to be the instigator for the development of AKI in the majority of patients with early sepsis. Other mechanisms in some patients cannot be excluded.

  4. Tubular duplication of the oesophagus presenting with dysphagia.

    PubMed

    Saha, A K; Kundu, A K

    2014-06-01

    Duplications of the alimentary tract are rare congenital malformations, with the ileum being the most commonly affected site, followed by the oesophagus. Among oesophageal duplications, cystic duplication is the most common and the tubular variety, the rarest. Herein, we report a rare case of tubular oesophageal duplication, complicated by adenosquamous carcinoma at the lower end of the oesophagus, in a 32-year-old man who presented with progressive dysphagia. Although proton pump inhibitors may relieve dysphagia, oesophagectomy and gastric interpositioning should be the first-line treatment for patients with tubular oesophageal duplication, in order to reduce the risk of malignant transformation at the lower end of the oesophagus.

  5. Tubular Peroxiredoxin 3 as a Predictor of Renal Recovery from Acute Tubular Necrosis in Patients with Chronic Kidney Disease

    PubMed Central

    Wu, Chia-Lin; Su, Tzu-Cheng; Chang, Chia-Chu; Kor, Chew-Teng; Chang, Chung-Ho; Yang, Tao-Hsiang; Chiu, Ping-Fang; Tarng, Der-Cherng

    2017-01-01

    Peroxiredoxin 3 (PRX3) is a mitochondrial antioxidant that regulates apoptosis in various cancers. However, whether tubular PRX3 predicts recovery of renal function following acute kidney injury (AKI) remains unknown. This retrospective cohort study included 54 hospitalized patients who had AKI with biopsy-proven acute tubular necrosis (ATN). The study endpoint was renal function recovery within 6 months. Of the 54 enrolled patients, 25 (46.3%) had pre-existing chronic kidney disease (CKD) and 33 (61%) recovered renal function. Tubular PRX3 expression was higher in patients with ATN than in those without renal function recovery. The level of tubular but not glomerular PRX3 expression predicted renal function recovery from AKI (AUROC = 0.76). In multivariate Cox regression analysis, high PRX3 expression was independently associated with a higher probability of renal function recovery (adjusted hazard ratio = 8.99; 95% CI 1.13–71.52, P = 0.04). Furthermore, the discriminative ability of the clinical model for AKI recovery was improved by adding tubular PRX3. High tubular PRX3 expression was associated with a higher probability of renal function recovery from ATN. Therefore, tubular PRX3 in combination with conventional predictors can further improve recovery prediction and may help with risk stratification in AKI patients with pre-existing CKD. PMID:28240739

  6. Tubular Peroxiredoxin 3 as a Predictor of Renal Recovery from Acute Tubular Necrosis in Patients with Chronic Kidney Disease.

    PubMed

    Wu, Chia-Lin; Su, Tzu-Cheng; Chang, Chia-Chu; Kor, Chew-Teng; Chang, Chung-Ho; Yang, Tao-Hsiang; Chiu, Ping-Fang; Tarng, Der-Cherng

    2017-02-27

    Peroxiredoxin 3 (PRX3) is a mitochondrial antioxidant that regulates apoptosis in various cancers. However, whether tubular PRX3 predicts recovery of renal function following acute kidney injury (AKI) remains unknown. This retrospective cohort study included 54 hospitalized patients who had AKI with biopsy-proven acute tubular necrosis (ATN). The study endpoint was renal function recovery within 6 months. Of the 54 enrolled patients, 25 (46.3%) had pre-existing chronic kidney disease (CKD) and 33 (61%) recovered renal function. Tubular PRX3 expression was higher in patients with ATN than in those without renal function recovery. The level of tubular but not glomerular PRX3 expression predicted renal function recovery from AKI (AUROC = 0.76). In multivariate Cox regression analysis, high PRX3 expression was independently associated with a higher probability of renal function recovery (adjusted hazard ratio = 8.99; 95% CI 1.13-71.52, P = 0.04). Furthermore, the discriminative ability of the clinical model for AKI recovery was improved by adding tubular PRX3. High tubular PRX3 expression was associated with a higher probability of renal function recovery from ATN. Therefore, tubular PRX3 in combination with conventional predictors can further improve recovery prediction and may help with risk stratification in AKI patients with pre-existing CKD.

  7. Design of a novel flexible shape memory alloy actuator with multilayer tubular structure for easy integration into a confined space

    NASA Astrophysics Data System (ADS)

    Leng, Jiaming; Yan, Xiaojun; Zhang, Xiaoyong; Huang, Dawei; Gao, Zhenjian

    2016-02-01

    This paper presents a novel flexible shape memory alloy (SMA) actuator, which is mainly composed of an SMA wire and a multilayer tubular structure. The multilayer tubular structure, which consists of a polytetrafluoroethylene tube, a metallic hose and a rubber tube, possesses the properties of good flexibility and high axial stiffness. The flexibility makes the SMA actuator easy to integrate into a compact or thin, narrow space with dimension constraints. The high axial stiffness helps in handling serious bending and prevents buckling of the SMA actuator. To verify the performance of the proposed actuator, a prototype was fabricated and a corresponding experimental setup was established. The effects of critical parameters, including heating current, winding angle, and applied load were experimentally investigated. The result demonstrates the feasibility of the proposed actuator and its easy integration into confined spaces. This work creates expanded opportunities for developing SMA actuators into broader application fields.

  8. Silicon microfabricated beam expander

    SciTech Connect

    Othman, A. Ibrahim, M. N.; Hamzah, I. H.; Sulaiman, A. A.; Ain, M. F.

    2015-03-30

    The feasibility design and development methods of silicon microfabricated beam expander are described. Silicon bulk micromachining fabrication technology is used in producing features of the structure. A high-precision complex 3-D shape of the expander can be formed by exploiting the predictable anisotropic wet etching characteristics of single-crystal silicon in aqueous Potassium-Hydroxide (KOH) solution. The beam-expander consist of two elements, a micromachined silicon reflector chamber and micro-Fresnel zone plate. The micro-Fresnel element is patterned using lithographic methods. The reflector chamber element has a depth of 40 µm, a diameter of 15 mm and gold-coated surfaces. The impact on the depth, diameter of the chamber and absorption for improved performance are discussed.

  9. Characterisation of human tubular cell monolayers as a model of proximal tubular xenobiotic handling

    SciTech Connect

    Brown, Colin D.A. Sayer, Rachel; Windass, Amy S.; Haslam, Iain S.; Broe, Marc E. de; D'Haese, Patrick C.; Verhulst, Anja

    2008-12-15

    The aim of this study was to determine whether primary human tubular cell monolayers could provide a powerful tool with which to investigate the renal proximal tubular handling of xenobiotics. Human proximal and distal tubule/collecting duct cells were grown as monolayers on permeable filter supports. After 10 days in culture, proximal tubule cells remained differentiated and expressed a wide palette of transporters at the mRNA level including NaPi-IIa, SGLT1, SGLT2, OCT2, OCTN2, OAT1, OAT3, OAT4, MDR1, MRP2 and BCRP. At the protein level, the expression of a subset of transporters including NaPi-IIa, OAT1 and OAT3 was demonstrated using immunohistochemistry. Analysis of the expression of the ATP binding cassette efflux pumps MDR1, MRP2 and BCRP confirmed their apical membrane localisation. At the functional level, tubule cell monolayers retain the necessary machinery to mediate the net secretion of the prototypic substrates; PAH and creatinine. PAH secretion across the monolayer consisted of the uptake of PAH across the basolateral membrane by OAT1 and OAT3 and the apical exit of PAH by a probenecid and MK571-sensitive route consistent with actions of MRP2 or MRP4. Creatinine secretion was by OCT2-mediated uptake at the basolateral membrane and via MDR1 at the apical membrane. Functional expression of MDR1 and BCRP at the apical membrane was also demonstrated using a Hoechst 33342 dye. Similarly, measurement of calcein efflux demonstrated the functional expression of MRP2 at the apical membrane of cell monolayers. In conclusion, human tubular cell monolayers provide a powerful tool to investigate renal xenobiotic handling.

  10. Energy production with a tubular propeller turbine

    NASA Astrophysics Data System (ADS)

    Samora, I.; Hasmatuchi, V.; Münch-Alligné, C.; Franca, M. J.; Schleiss, A. J.; Ramos, H. M.

    2016-11-01

    Micro-hydropower is a way of improving the energetic efficiency of existent water systems. In the particular case of drinking water systems, several studies have showed that pressure reducing valves can be by-passed with turbines in order to recover the dissipated hydraulic energy to produce electricity. As conventional turbines are not always cost-effective for power under 20 kW, a new energy converter is studied. A five blade tubular propeller (5BTP), assessed through laboratorial tests on a reduced model with a diameter of 85 mm diameter and a maximal output power of 300 W, is addressed in this work. Having showed promising potential for further development, since global efficiencies of around 60% were observed, the turbine has been further used to estimate the potential for energy production in a real case study. A sub-grid of the drinking water system of the city of Lausanne, Switzerland, has been used to obtain an annual energy production through hourly simulations with several turbines.

  11. Status of tubular SOFC field unit demonstrations

    NASA Astrophysics Data System (ADS)

    George, Raymond A.

    Siemens Westinghouse is in the final stage of its tubular solid oxide fuel cell (SOFC) development program, and the program emphasis has shifted from basic technology development to cost reduction, scale-up and demonstration of pre-commercial power systems at customer sites. This paper describes our field unit demonstration program including the EDB/ELSAM 100-kW e combined heat and power (CHP) system, the Southern California Edison (SCE) 220-kW e pressurized SOFC/gas turbine (PSOFC/GT) power system, and the planned demonstrations of commercial prototype power systems. In the Spring of 1999, the EDB/ELSAM 100-kW e SOFC-CHP system produced 109 kW e net AC to the utility grid at 46% electrical efficiency and 65 kW t to the hot water district heating system, verifying the analytical predictions. The SCE 220-kW e PSOFC/GT power system will undergo factory startup in the Fall of 1999.

  12. Inflatable Tubular Structures Rigidized with Foams

    NASA Technical Reports Server (NTRS)

    Tinker, Michael L.; Schnell, Andrew R.

    2010-01-01

    Inflatable tubular structures that have annular cross sections rigidized with foams, and the means of erecting such structures in the field, are undergoing development. Although the development effort has focused on lightweight structural booms to be transported in compact form and deployed in outer space, the principles of design and fabrication are also potentially applicable to terrestrial structures, including components of ultralightweight aircraft, lightweight storage buildings and shelters, lightweight insulation, and sales displays. The use of foams to deploy and harden inflatable structures was first proposed as early as the 1960s, and has been investigated in recent years by NASA, the U.S. Air Force Research Laboratory, industry, and academia. In cases of deployable booms, most of the investigation in recent years has focused on solid cross sections, because they can be constructed relatively easily. However, solid-section foam-filled booms can be much too heavy for some applications. In contrast, booms with annular cross sections according to the present innovation can be tailored to obtain desired combinations of stiffness and weight through choice of diameters, wall thicknesses, and foam densities. By far the most compelling advantage afforded by this innovation is the possibility of drastically reducing weights while retaining or increasing the stiffnesses, relative to comparable booms that have solid foamfilled cross sections. A typical boom according to this innovation includes inner and outer polyimide film sleeves to contain foam that is injected between them during deployment.

  13. Pressure driven flow in porous tubular membranes

    NASA Astrophysics Data System (ADS)

    Tilton, Nils; Martinand, Denis; Serre, Eric; Lueptow, Richard

    2011-11-01

    We consider the steady laminar flow of a Newtonian incompressible fluid in a porous tubular membrane with pressure-driven transmembrane flow. Due to its fundamental importance to membrane filtration systems, this flow has been studied extensively both analytically and numerically, yet a robust analytic solution has not been found. The problem is challenging due to the coupling between the transmembrane pressure and velocity with the simultaneous coupling between the axial pressure gradient and the axial velocity. We present a robust analytical solution which incorporates Darcy's law on the membrane surface. The solution is in the form of an asymptotic expansion about a small parameter related to the membrane permeability. We verify the analytical solution with comparison to 2-D spectral direct numerical simulations of ultrafiltration and microfiltration systems with typical operating conditions, as well as extreme cases of cross-flow reversal and axial flow exhaustion. In all cases, the agreement between the analytical and numerical results is excellent. Finally, we use the analytical and numerical results to provide guidelines about when common simplifying assumptions about the permeate flow may be made. Specifically, the assumptions of a parabolic axial velocity profile and uniform transmembrane velocity are valid only for small permeabilities.

  14. Renal tubular vasopressin receptors downregulated by dehydration

    SciTech Connect

    Steiner, M.; Phillips, M.I. )

    1988-03-01

    Receptors for arginine vasopressin (AVP) were characterized in tubular epithelial basolateral membranes (BL membranes) prepared from the kidneys of male Spraque-Dawley rats. Association of ({sup 3}H)AVP was rapid, reversible, and specific. Saturation studies revealed a single class of saturable binding sites with a maximal binding (B{sub max}) of 184 {plus minus} 15 fmol/mg protein. The V{sub 2} receptor antagonist was more than 3,700 times as effective in displacing ({sup 3}H)AVP than was the V{sub 1} antagonist. To investigate the physiological regulation of vasopressin receptors, the effects of elevated levels of circulating AVP on receptor characteristics were studied. Seventy-two-hour water deprivation significantly elevated plasma osmolality and caused an 11.5-fold increase in plasma (AVP). Scatchard analysis revealed a 38% decreased in the number of AVP receptors on the BL membranes from dehydrated animals. The high-affinity binding sites on the BL membranes fit the pharmacological profile for adenylate cyclase-linked vasopressin receptors (V{sub 2}), which mediate the antidiuretic action of the hormone. The authors conclude that physiologically elevated levels of AVP can downregulate vasopressin receptors in the kidney.

  15. Tubular Heart Valves from Decellularized Engineered Tissue

    PubMed Central

    Syedain, Zeeshan H.; Meier, Lee A.; Reimer, Jay; Tranquillo, Robert T.

    2013-01-01

    A novel tissue-engineered heart valve (TEHV) was fabricated from a decellularized tissue tube mounted on a frame with three struts, which upon back-pressure cause the tube to collapse into three coapting “leaflets”. The tissue was completely biological, fabricated from ovine fibroblasts dispersed within a fibrin gel, compacted into a circumferentially-aligned tube on a mandrel, and matured using a bioreactor system that applied cyclic distension. Following decellularization, the resulting tissue possessed tensile mechanical properties, mechanical anisotropy, and collagen content that were comparable to native pulmonary valve leaflets. When mounted on a custom frame and tested within a pulse duplicator system, the tubular TEHV displayed excellent function under both aortic and pulmonary conditions, with minimal regurgitant fractions and transvalvular pressure gradients at peak systole, as well as well as effective orifice areas exceeding those of current commercially available valve replacements. Short-term fatigue tests of one million cycles with pulmonary pressure gradients was conducted without significant change in mechanical properties and no observable macroscopic tissue deterioration. This study presents an attractive potential alternative to current tissue valve replacements due to its avoidance of chemical fixation and utilization of a tissue conducive to recellularization by host cell infiltration. PMID:23897047

  16. Tubular filamentation for laser material processing

    PubMed Central

    Xie, Chen; Jukna, Vytautas; Milián, Carles; Giust, Remo; Ouadghiri-Idrissi, Ismail; Itina, Tatiana; Dudley, John M.; Couairon, Arnaud; Courvoisier, Francois

    2015-01-01

    An open challenge in the important field of femtosecond laser material processing is the controlled internal structuring of dielectric materials. Although the availability of high energy high repetition rate femtosecond lasers has led to many advances in this field, writing structures within transparent dielectrics at intensities exceeding 1013 W/cm2 has remained difficult as it is associated with significant nonlinear spatial distortion. This letter reports the existence of a new propagation regime for femtosecond pulses at high power that overcomes this challenge, associated with the generation of a hollow uniform and intense light tube that remains propagation invariant even at intensities associated with dense plasma formation. This regime is seeded from higher order nondiffracting Bessel beams, which carry an optical vortex charge. Numerical simulations are quantitatively confirmed by experiments where a novel experimental approach allows direct imaging of the 3D fluence distribution within transparent solids. We also analyze the transitions to other propagation regimes in near and far fields. We demonstrate how the generation of plasma in this tubular geometry can lead to applications in ultrafast laser material processing in terms of single shot index writing, and discuss how it opens important perspectives for material compression and filamentation guiding in atmosphere. PMID:25753215

  17. Cytocompatibility of a silk fibroin tubular scaffold.

    PubMed

    Wang, Jiannan; Wei, Yali; Yi, Honggen; Liu, Zhiwu; Sun, Dan; Zhao, Huanrong

    2014-01-01

    Regenerated silk fibroin (SF) materials are increasingly used for tissue engineering applications. In order to explore the feasibility of a novel biomimetic silk fibroin tubular scaffold (SFTS) crosslinked by poly(ethylene glycol) diglycidyl ether (PEG-DE), biocompatibility with cells was evaluated. The novel biomimetic design of the SFTS consisted of three distinct layers: a regenerated SF intima, a silk braided media and a regenerated SF adventitia. The SFTS exhibited even silk fibroin penetration throughout the braid, forming a porous layered tube with superior mechanical, permeable and cell adhesion properties that are beneficial to vascular regeneration. Cytotoxicity and cell compatibility were tested on L929 cells and human umbilical vein endothelial cells (EA.hy926). DNA content analysis, scanning electron and confocal microscopies and MTT assay showed no inhibitory effects on DNA replication. Cell morphology, viability and proliferation were good for L929 cells, and satisfactory for EA.hy926 cells. Furthermore, the suture retention strength of the SFTS was about 23N and the Young's modulus was 0.2-0.3MPa. Collectively, these data demonstrate that PEG-DE crosslinked SFTS possesses the appropriate cytocompatibility and mechanical properties for use as vascular scaffolds as an alternative to vascular autografts.

  18. Development of an alternating flat to tubular Kevlar parachute tape

    SciTech Connect

    Ericksen, R.H.; Koch, R.

    1989-01-01

    An alternating flat to tubular Kevlar tape was developed to replace braided suspension lines and woven tape radials on the new crew escape module parachute system for the F-111 aircraft. Weaves were developed which had high strength efficiency and low weight throughout the flat, tubular, and transition sections. A tubular section strength of 535 lbs at a weight of 0.044 oz/yd was achieved. This reduces suspension line weight by 8% compared with that of the most efficient braid which has a strength of 470 lbs and weighs 0.048 oz/yd. Length measuring procedures for production control and inspection were developed. Using these procedures it was possible to produce alternating weave fabric with less than 1% variation in length in the tubular sections. 3 refs., 4 figs., 3 tabs.

  19. Genetics Home Reference: renal tubular acidosis with deafness

    MedlinePlus

    ... to softening and weakening of the bones , called rickets in children and osteomalacia in adults. This bone ... tubular acidosis and sensorineural hearing loss. Clin Genet. 2013 Mar;83(3):274-8. doi: 10.1111/ ...

  20. Numerical Observation of a Tubular Phase in Anisotropic Membranes

    SciTech Connect

    Bowick, M.; Falcioni, M.; Thorleifsson, G.

    1997-08-01

    We provide the first numerical evidence for the existence of a tubular phase, predicted by Radzihovsky and Toner (RT), for anisotropic tethered membranes without self-avoidance. Incorporating anisotropy into the bending rigidity of a simple model of a tethered membrane with free boundary conditions, we show that the model indeed has two phase transitions corresponding to the flat-to-tubular and tubular-to-crumpled transitions. For the tubular phase we measure the Flory exponent {nu}{sub F} and the roughness exponent {zeta} . We find {nu}{sub F}=0.305(14) and {zeta}=0.895(60) , which are in reasonable agreement with the theoretical predictions of RT; {nu}{sub F}=1/4 and {zeta}=1 . {copyright} {ital 1997} {ital The American Physical Society}

  1. Distal Renal Tubular Acidosis in Infancy: A Bicarbonate Wasting State

    ERIC Educational Resources Information Center

    Rodriguez-Soriano, J.; And Others

    1975-01-01

    Studied were three unrelated infants with distal renal tubular acidosis (a condition characterized by an inability to acidify the urine to minimal pH levels resulting in the loss of bicarbonates). (DB)

  2. Distal Renal Tubular Acidosis in Infancy: A Bicarbonate Wasting State

    ERIC Educational Resources Information Center

    Rodriguez-Soriano, J.; And Others

    1975-01-01

    Studied were three unrelated infants with distal renal tubular acidosis (a condition characterized by an inability to acidify the urine to minimal pH levels resulting in the loss of bicarbonates). (DB)

  3. Mechanisms of renal tubular defects in old age.

    PubMed Central

    Dontas, A. S.; Marketos, S. G.; Papanayiotou, P.

    1972-01-01

    The mechanisms of renal tubular dysfunction in old age have been examined in twenty-eight clinically healthy elderly subjects without infection, and in fourteen subjects of similar age with laboratory evidence of intrarenal infection. The data were compared with those from thirteen clinically healthy young subjects. Studied were: proximal tubular (Tm(PAH)) and distal tubular (CH2O) activity, minimal and maximal osmolal U/P ratios, maximal osmolal excretion in hydropenia, and GFR levels under standard hydration and under water-loading. The reduction of GFR in old age is evident particularly in men under conditions of standard hydration: it is accentuated in the presence of renal infection. Proximal tubular activity is also significantly lower in elderly men, especially if they have chronic bacteriuria. The reduction is closely related to GFR levels, with identical Tm(PAH):C(in) ratios in all groups. This supports the intact nephron hypothesis for this part of the nephron. Distal tubular activity is depressed in old age in both sexes proportionately more than proximal tubular activity or the GFR. The lower CH2O: GFR ratios imply a selective distal tubular damage. Maximal osmolal U/P ratios in hydropenia are significantly higher in the young (mean 367) than in either the elderly non-infected (mean 279) or the elderly infected subjects (mean 212). Conversely, minimal U/P ratios in water-loading are lower in the young (mean 0.247) than in either elderly group (means 0.418 and 0.668). Osmolal excretion in hydropenia is not different between the groups, but urine flows in water-loading clearly separate them. The data indicate that simple functions of the distal-collecting tubule (e.g. the CH2O), are less affected in old age than are functions involving several medullary structures (as is the maximal U(osm) or U/P ratio). They suggest that the main impairment of the distal tubular cell involves the failure to achieve a proper osmotic gradient between tubular fluid and

  4. Transient Distal Renal Tubular Acidosis in Organophosphate Poisoning

    PubMed Central

    Narayan, Ram; Abdulla, Mansoor C.; Alungal, Jemshad

    2017-01-01

    Renal complications due to organophosphate poisoning are very rare. We are presenting a unique case of transient distal renal tubular acidosis due to organophosphate poisoning, which to the best of our knowledge is the first of its kind. An elderly female after deliberate self-harm with ingestion of chlorpyrifos had multiple ventricular arrhythmias due to hypokalemia secondary to distal renal tubular acidosis which improved completely after treatment.

  5. Worse Prognosis in Papillary, Compared to Tubular, Early Gastric Carcinoma

    PubMed Central

    Yu, Huiping; Fang, Cheng; Chen, Lin; Shi, Jiong; Fan, Xianshan; Zou, Xiaoping; Huang, Qin

    2017-01-01

    Purpose: Papillary early gastric carcinoma (EGC) is uncommon but shows worse prognosis in our most recent study in a Chinese population with unknown reasons. The aim of the present study was to further investigate risk factors for worse prognosis in patients with papillary adenocarcinoma, compared to those with tubular adenocarcinoma. Methods: We searched the electronic pathology databank for radical gastrectomy cases over an 8-year period at a single medical center in Nanjing, China, and identified consecutive 240 EGC cases that were classified as either papillary (n=59) or tubular (n=181) EGC tumors in accordance with the World Health Organization (WHO) gastric cancer diagnosis criteria. We investigated and compared clinicopathologic risk factors for prognosis between papillary and tubular EGC groups. All patients were followed up and their 5-year survival rate was compared statistically with the Kaplan-Meier method with a log rank test. Results: Compared to tubular EGCs, papillary EGCs were significantly more common in elderly patients, more frequently occurred in the proximal stomach with protruding/elevated growth patterns, submucosal invasion, and a micropapillary component. Although lymphovascular invasion (16.9%), nodal (13.6%) and distant (11.8%) metastases in papillary EGCs were more frequent than those (8.3%, 7.2%, and 3.7%, respectively) in tubular EGCs, the differences approached but did not reach statistically significant levels. Significant risk factors for nodal metastasis included lymphovascular invasion in both EGC groups, but the ulcerative pattern and submucosal invasion only in tubular EGCs. The 5-year survival rate was significantly worse in papillary (80.5%) than in tubular (96.8%) EGCs. Conclusions: Compared to tubular EGCs, papillary EGCs diagnosed with the WHO criteria in Chinese patients were more frequent in elderly patients, proximal stomach and showed the significantly worse 5-year survival rate with more protruding/elevated growth

  6. Tubular Epithelial NF-κB Activity Regulates Ischemic AKI.

    PubMed

    Markó, Lajos; Vigolo, Emilia; Hinze, Christian; Park, Joon-Keun; Roël, Giulietta; Balogh, András; Choi, Mira; Wübken, Anne; Cording, Jimmi; Blasig, Ingolf E; Luft, Friedrich C; Scheidereit, Claus; Schmidt-Ott, Kai M; Schmidt-Ullrich, Ruth; Müller, Dominik N

    2016-09-01

    NF-κB is a key regulator of innate and adaptive immunity and is implicated in the pathogenesis of AKI. The cell type-specific functions of NF-κB in the kidney are unknown; however, the pathway serves distinct functions in immune and tissue parenchymal cells. We analyzed tubular epithelial-specific NF-κB signaling in a mouse model of ischemia-reperfusion injury (IRI)-induced AKI. NF-κB reporter activity and nuclear localization of phosphorylated NF-κB subunit p65 analyses in mice revealed that IRI induced widespread NF-κB activation in renal tubular epithelia and in interstitial cells that peaked 2-3 days after injury. To genetically antagonize tubular epithelial NF-κB activity, we generated mice expressing the human NF-κB super-repressor IκBαΔN in renal proximal, distal, and collecting duct epithelial cells. Compared with control mice, these mice exhibited improved renal function, reduced tubular apoptosis, and attenuated neutrophil and macrophage infiltration after IRI-induced AKI. Furthermore, tubular NF-κB-dependent gene expression profiles revealed temporally distinct functional gene clusters for apoptosis, chemotaxis, and morphogenesis. Primary proximal tubular cells isolated from IκBαΔN-expressing mice and exposed to hypoxia-mimetic agent cobalt chloride exhibited less apoptosis and expressed lower levels of chemokines than cells from control mice did. Our results indicate that postischemic NF-κB activation in renal tubular epithelia aggravates tubular injury and exacerbates a maladaptive inflammatory response.

  7. Irritable bowel syndrome in women undergoing hysterectomy and tubular ligation

    PubMed Central

    Khoshbaten, Manouchehr; Melli, Manigheh Syah; Fattahi, Monireh Jabar; Sharifi, Nasrin; Mostafavi, Seyed Abolfazl

    2011-01-01

    Aim The aim of this study was to assess the incidence of irritable bowel syndrome in women undergoing hysterectomy and tubular ligation. Background The results of previous studies have shown an increased incidence of irritable bowel syndrome after gynecological surgeries. Patients and methods Participants were patients of Alzahra and Taleghani University hospitals in Tabriz. One hundred and seventy two women without gastrointestinal symptoms or a diagnosis of the irritable bowel syndrome underwent tubular ligation and 164 women underwent hysterectomy. Patients were assessed every 3 month after hysterectomy and tubular ligation for 12 months. Irritable bowel syndrome was diagnosed by a questionnaire based on Rome II criteria. Results During 12 months after surgeries, 19 (11%) patients in tubular ligation group and 19 (11%) in hysterectomy group had abdominal pain with at least two symptoms of irritable bowel syndrome. Irritable bowel syndrome was diagnosed in 9 (5%) patients in the tubular ligation and 13 (8%) patients in hysterectomy groups (P>0.05). In both studied groups, the most prevalent symptoms along with abdominal pain were chronic constipation and abnormal bowel movement and the least prevalent were diarrhea and passage of mucus. Conclusion These results suggest that gynecological surgeries (tubular ligation and hysterectomy) may predispose to the development of the irritable bowel syndrome. PMID:24834172

  8. A cut-off tubular geometry of loop space

    NASA Astrophysics Data System (ADS)

    Mukhopadhyay, Partha

    Motivated by the computation of loop space quantum mechanics as indicated in [14], here we seek a better understanding of the tubular geometry of loop space ℒℳ corresponding to a Riemannian manifold ℳ around the submanifold of vanishing loops. Our approach is to first compute the tubular metric of (ℳ2N+1) C around the diagonal submanifold, where (ℳN) C is the Cartesian product of N copies of ℳ with a cyclic ordering. This gives an infinite sequence of tubular metrics such that the one relevant to ℒℳ can be obtained by taking the limit N →∞. Such metrics are computed by adopting an indirect method where the general tubular expansion theorem of [21] is crucially used. We discuss how the complete reparametrization isometry of loop space arises in the large-N limit and verify that the corresponding Killing equation is satisfied to all orders in tubular expansion. These tubular metrics can alternatively be interpreted as some natural Riemannian metrics on certain bundles of tangent spaces of ℳ which, for ℳ×ℳ, is the tangent bundle Tℳ.

  9. Straightening tubular flow for side-by-side visualization.

    PubMed

    Angelelli, Paolo; Hauser, Helwig

    2011-12-01

    Flows through tubular structures are common in many fields, including blood flow in medicine and tubular fluid flows in engineering. The analysis of such flows is often done with a strong reference to the main flow direction along the tubular boundary. In this paper we present an approach for straightening the visualization of tubular flow. By aligning the main reference direction of the flow, i.e., the center line of the bounding tubular structure, with one axis of the screen, we are able to natively juxtapose (1.) different visualizations of the same flow, either utilizing different flow visualization techniques, or by varying parameters of a chosen approach such as the choice of seeding locations for integration-based flow visualization, (2.) the different time steps of a time-dependent flow, (3.) different projections around the center line , and (4.) quantitative flow visualizations in immediate spatial relation to the more qualitative classical flow visualization. We describe how to utilize this approach for an informative interactive visual analysis. We demonstrate the potential of our approach by visualizing two datasets from two different fields: an arterial blood flow measurement and a tubular gas flow simulation from the automotive industry.

  10. Expanding Views on Transition.

    ERIC Educational Resources Information Center

    Repetto, Jeanne B.; Correa, Vivian I.

    1996-01-01

    This position paper proposes an expanded definition of transition, based on common components of early childhood and secondary perspectives. It advocates for a seamless model of transition service delivery for students with disabilities, including program planning, from birth through age 21. The model addresses curriculum, location of services,…

  11. Expanded Roles for HRD.

    ERIC Educational Resources Information Center

    1998

    This document contains three papers from a symposium on expanded roles for human resource development (HRD). "The Roles of Consultants in Gainsharing Firms: Empirical Results" (Eunsang Cho, Gary N. McLean) reports findings that consultants are moderately involved at the separation, preparation, evaluation, and design stages and have low…

  12. Expand Your Hiring Horizons.

    ERIC Educational Resources Information Center

    Leske, Lucy Apthorp; Archer-Martin, Nancy

    1999-01-01

    To succeed in recruiting development officers, colleges and universities must use more aggressive methods to reach alumni, people with ties to the campus, and local business people; expand their selection criteria, perhaps including candidates with little or no experience; streamline the hiring process; and train new professionals. (MSE)

  13. ExpandED Options: Learning beyond High School Walls

    ERIC Educational Resources Information Center

    ExpandED Schools, 2014

    2014-01-01

    Through ExpandED Options by TASC, New York City high school students get academic credit for learning career-related skills that lead to paid summer jobs. Too many high school students--including those most likely to drop out--are bored or see classroom learning as irrelevant. ExpandED Options students live the connection between mastering new…

  14. Acute tubular necrosis associated with mTOR inhibitor therapy: a real entity biopsy-proven.

    PubMed

    Izzedine, H; Escudier, B; Rouvier, P; Gueutin, V; Varga, A; Bahleda, R; Soria, J C

    2013-09-01

    The protein kinase mTOR (mammalian target of rapamycin) is a critical regulator of cellular metabolism, growth, and proliferation. Inhibitors of mTOR have immunosuppressive and anti-cancer effects, but their effects on the progression of kidney disease are not fully understood. Their most common side-effects include stomatitis, rash, dyslipidemia, hyperglycemia, fatigue, and pneumonitis. However, to the best of our knowledge these agents have not been previously reported to cause severe acute kidney injury (AKI). We describe four cases of patients with cancer who developed AKI after starting mTOR inhibitor therapy. A kidney biopsy showed acute tubular necrosis (ATN) with prominent tubular dysfunction. Withdrawal of the drug leads to a rapid recovery in two cases. However, a fixed renal dysfunction was noted in the other two cases, one of which will remain dialysis-dependent. Such patients lead to a broad differential diagnosis of AKI including prerenal AKI, ATN, cancer-related GN, and drug-induced acute interstitial nephritis. Accurate history, physical examination, laboratory data, and kidney biopsy are highlighted in establishing the correct diagnosis in such patients. ATN have not been reported with mTOR inhibitor use. These cases demonstrated a potentially new and serious adverse consequence occurring with the use of an mTOR inhibitor, of which physicians need to be aware.

  15. Factors affecting proximal tubular reabsorption during development

    SciTech Connect

    Kaskel, F.J.; Kumar, A.M.; Lockhart, E.A.; Evan, A.; Spitzer, A.

    1987-01-01

    Studies performed in several animal species have demonstrated that glomerulotubular balance is maintained throughout development despite the many changes that occur in the factors known to control it. In an attempt to understand the nature of this phenomenon the authors quantified the magnitude and described the profile of these changes in guinea pigs. The changes in physical forces were assessed from measurements of hydrostatic and oncotic pressures, whereas those in the permeability characteristics of the proximal tubule epithelium were estimated from permanence to radioactivity-labelled macromolecules of graded radii, histologic measurements of the intercellular channels, and measurements of end-proximal ratio of tubular fluid-to-plasma osmolality (TF/P/sub osm/). Between 1 and 50 days of age the net pressure for reabsorption increased from 15.0 to 30.9 mmHg with the major change occurring during the first 2-3 wk of postnatal life. The urinary recovery of (/sup 3/H)inulin, (/sup 14/C)sucrose, and (/sup 14/C)creatinine, injected in the early segment of proximal tubules did not vary with age. The urinary recovery of (/sup 14/C)mannitol increased from 92% at birth to 100% at 49 days of age. The length of the zonulae occludens and the width of the intercellular channels did not change during this period. The findings support the hypothesis that during early postnatal life glomerulotubular balance is made possible by a high permeability of the proximal tubule, which compensates for the low net reabsorptive pressure. As the animal matures and the proximal tubule epithelium becomes tighter, for glomerulotubular balance to be maintained, an increase in the number of intercellular channels and in the active transport of sodium need to be postulated.

  16. Structural Design Considerations for Tubular Power Tower Receivers Operating at 650 Degrees C: Preprint

    SciTech Connect

    Neises, T. W.; Wagner, M. J.; Gray, A. K.

    2014-04-01

    Research of advanced power cycles has shown supercritical carbon dioxide power cycles may have thermal efficiency benefits relative to steam cycles at temperatures around 500 - 700 degrees C. To realize these benefits for CSP, it is necessary to increase the maximum outlet temperature of current tower designs. Research at NREL is investigating a concept that uses high-pressure supercritical carbon dioxide as the heat transfer fluid to achieve a 650 degrees C receiver outlet temperature. At these operating conditions, creep becomes an important factor in the design of a tubular receiver and contemporary design assumptions for both solar and traditional boiler applications must be revisited and revised. This paper discusses lessons learned for high-pressure, high-temperature tubular receiver design. An analysis of a simplified receiver tube is discussed, and the results show the limiting stress mechanisms in the tube and the impact on the maximum allowable flux as design parameters vary. Results of this preliminary analysis indicate an underlying trade-off between tube thickness and the maximum allowable flux on the tube. Future work will expand the scope of design variables considered and attempt to optimize the design based on cost and performance metrics.

  17. Au Fixed Point Development at NRC

    NASA Astrophysics Data System (ADS)

    Dedyulin, S. N.; Gotoh, M.; Todd, A. D. W.

    2017-04-01

    Two Au fixed points filled using metal of different nominal purities in carbon crucibles have been developed at the National Research Council Canada (NRC). The primary motivation behind this project was to provide the means for direct thermocouple calibrations at the Au freezing point (1064.18°C). Using a Au fixed point filled with the metal of maximum available purity [99.9997 % pure according to glow discharge mass spectroscopy (GDMS)], multiple freezing plateaus were measured in a commercial high-temperature furnace. Four Pt/Pd thermocouples constructed and calibrated in-house were used to measure the freezing plateaus. From the calibration at Sn, Zn, Al and Ag fixed points, the linear deviation function from the NIST-IMGC reference function (IEC 62460:2008 Standard) was determined and extrapolated to the freezing temperature of Au. For all the Pt/Pd thermocouples used in this study, the measured EMF values agree with the extrapolated values within expanded uncertainty, thus substantiating the use of 99.9997 % pure Au fixed point cell for thermocouple calibrations at NRC. Using the Au fixed point filled with metal of lower purity (99.99 % pure according to GDMS), the effect of impurities on the Au freezing temperature measured with Pt/Pd thermocouple was further investigated.

  18. Grazing incidence beam expander

    SciTech Connect

    Akkapeddi, P.R.; Glenn, P.; Fuschetto, A.; Appert, Q.; Viswanathan, V.K.

    1985-01-01

    A Grazing Incidence Beam Expander (GIBE) telescope is being designed and fabricated to be used as an equivalent end mirror in a long laser resonator cavity. The design requirements for this GIBE flow down from a generic Free Electron Laser (FEL) resonator. The nature of the FEL gain volume (a thin, pencil-like, on-axis region) dictates that the output beam be very small. Such a thin beam with the high power levels characteristic of FELs would have to travel perhaps hundreds of meters or more before expanding enough to allow reflection from cooled mirrors. A GIBE, on the other hand, would allow placing these optics closer to the gain region and thus reduces the cavity lengths substantially. Results are presented relating to optical and mechanical design, alignment sensitivity analysis, radius of curvature analysis, laser cavity stability analysis of a linear stable concentric laser cavity with a GIBE. Fabrication details of the GIBE are also given.

  19. Grazing incidence beam expander

    NASA Astrophysics Data System (ADS)

    Akkapeddi, P. R.; Glenn, P.; Fuschetto, A.; Appert, Q.; Viswanathan, V. K.

    1985-01-01

    A Grazing Incidence Beam Expander (GIBE) telescope is being designed and fabricated to be used as an equivalent end mirror in a long laser resonator cavity. The design requirements for this GIBE flow down from a generic Free Electron Laser (FEL) resonator. The nature of the FEL gain volume (a thin, pencil-like, on-axis region) dictates that the output beam be very small. Such a thin beam with the high power levels characteristic of FELs would have to travel perhaps hundreds of meters or more before expanding enough to allow reflection from cooled mirrors. A GIBE, on the other hand, would allow placing these optics closer to the gain region and thus reduces the cavity lengths substantially. Results are presented relating to optical and mechanical design, alignment sensitivity analysis, radius of curvature analysis, laser cavity stability analysis of a linear stable concentric laser cavity with a GIBE. Fabrication details of the GIBE are also given.

  20. Expandable LED array interconnect

    DOEpatents

    Yuan, Thomas Cheng-Hsin; Keller, Bernd

    2011-03-01

    A light emitting device that can function as an array element in an expandable array of such devices. The light emitting device comprises a substrate that has a top surface and a plurality of edges. Input and output terminals are mounted to the top surface of the substrate. Both terminals comprise a plurality of contact pads disposed proximate to the edges of the substrate, allowing for easy access to both terminals from multiple edges of the substrate. A lighting element is mounted to the top surface of the substrate. The lighting element is connected between the input and output terminals. The contact pads provide multiple access points to the terminals which allow for greater flexibility in design when the devices are used as array elements in an expandable array.

  1. Discovering the Expanding Universe

    NASA Astrophysics Data System (ADS)

    Nussbaumer, Harry; Bieri, Lydia; Sandage, Foreword by Allan

    2009-03-01

    Acknowledgments; Foreword; 1. Introduction; 2. Cosmological concepts at the end of the Middle Ages; 3. Nebulae as a new astronomical phenomenon; 4. On the construction of the Heavens; 5. Island universes turn into astronomical facts: a universe of galaxies; 6. The early cosmology of Einstein and de Sitter; 7. The dynamical universe of Friedmann; 8. Redshifts: how to reconcile Slipher and de Sitter?; 9. Lemaître discovers the expanding universe; 10. Hubble's contribution of 1929; 11. The breakthrough for the expanding universe; 12. Hubble's anger about de Sitter; 13. Robertson and Tolman join the game; 14. The Einstein-de Sitter universe; 15. Are Sun and Earth older than the universe?; 16. In search of alternative tracks; 17. The seed for the Big Bang; 18. Summary and Postscript; Appendix; References; Index.

  2. Comprehensive Assessment of the Regulons Controlled by the FixLJ-FixK2-FixK1 Cascade in Bradyrhizobium japonicum▿ †

    PubMed Central

    Mesa, Socorro; Hauser, Felix; Friberg, Markus; Malaguti, Emmanuelle; Fischer, Hans-Martin; Hennecke, Hauke

    2008-01-01

    Symbiotic N2 fixation in Bradyrhizobium japonicum is controlled by a complex transcription factor network. Part of it is a hierarchically arranged cascade in which the two-component regulatory system FixLJ, in response to a moderate decrease in oxygen concentration, activates the fixK2 gene. The FixK2 protein then activates not only a number of genes essential for microoxic respiration in symbiosis (fixNOQP and fixGHIS) but also further regulatory genes (rpoN1, nnrR, and fixK1). The results of transcriptome analyses described here have led to a comprehensive and expanded definition of the FixJ, FixK2, and FixK1 regulons, which, respectively, consist of 26, 204, and 29 genes specifically regulated in microoxically grown cells. Most of these genes are subject to positive control. Particular attention was addressed to the FixK2-dependent genes, which included a bioinformatics search for putative FixK2 binding sites on DNA (FixK2 boxes). Using an in vitro transcription assay with RNA polymerase holoenzyme and purified FixK2 as the activator, we validated as direct targets eight new genes. Interestingly, the adjacent but divergently oriented fixK1 and cycS genes shared the same FixK2 box for the activation of transcription in both directions. This recognition site may also be a direct target for the FixK1 protein, because activation of the cycS promoter required an intact fixK1 gene and either microoxic or anoxic, denitrifying conditions. We present evidence that cycS codes for a c-type cytochrome which is important, but not essential, for nitrate respiration. Two other, unexpected results emerged from this study: (i) specifically FixK1 seemed to exert a negative control on genes that are normally activated by the N2 fixation-specific transcription factor NifA, and (ii) a larger number of genes are expressed in a FixK2-dependent manner in endosymbiotic bacteroids than in culture-grown cells, pointing to a possible symbiosis-specific control. PMID:18689489

  3. Expanding the HAWC Observatory

    SciTech Connect

    Mori, Johanna

    2016-08-17

    The High Altitude Water Cherenkov Gamma-Ray Observatory is expanding its current array of 300 water tanks to include 350 outrigger tanks to increase sensitivity to gamma rays above 10 TeV. This involves creating and testing hardware with which to build the new tanks, including photomultiplier tubes, high voltage supply units, and flash analog to digital converters. My responsibilities this summer included preparing, testing and calibrating that equipment.

  4. Selective uptake of (/sup 3/H)arachidonic acid into the dense tubular system of human platelets

    SciTech Connect

    Laposata, M.; Krueger, C.M.; Saffitz, J.E.

    1987-09-01

    We have used quantitative electron microscopic autoradiography to characterize the subcellular distribution of arachidonoyl phospholipids following brief (5 minutes) exposure of unstimulated human platelets to (/sup 3/H)arachidonic acid. Labeled arachidonate was taken up rapidly and incorporated into phospholipids. Phospholipid radioactivity was preserved and spatially fixed during tissue processing for electron microscopy. Analysis of autoradiographs showed that following a brief exposure to 750 nmol/L (/sup 3/H)arachidonate, there is selective labeling of an internal membrane compartment composed of the dense tubular system and the open canalicular system. The plasma membrane, platelet granules, and nonmembranous cytoplasm were not labeled. Since the open canalicular system is continuous with the plasma membrane and since phospholipids in continuous membranes are freely diffusible, our observations indicate that (/sup 3/H)arachidonate was incorporated into phospholipids within the dense tubular system and not the open canalicular system. Thus, the dense tubular system, known to contain cyclooxygenase activity, incorporates arachidonate selectively following brief exposure to this fatty acid, presumably to concentrate it in proximity to enzymes for icosanoid synthesis.

  5. Autophagy protects renal tubular cells against cyclosporine toxicity.

    PubMed

    Pallet, Nicolas; Bouvier, Nicolas; Legendre, Christophe; Gilleron, Jerome; Codogno, Patrice; Beaune, Philippe; Thervet, Eric; Anglicheau, Dany

    2008-08-01

    A major side effect of the powerful immunosuppressive drug cyclosporine (CsA) is the development of a chronic nephrotoxicity whose mechanisms are not fully understood. Recent data suggest that tubular cells play a central role in the pathogenesis of chronic nephropathies. We have shown that CsA is responsible for endoplasmic reticulum (ER) stress in tubular cells. Autophagy has recently been described to be induced by ER stress and to alleviate its deleterious effects. In this study, we demonstrate that CsA induces autophagy in primary cultured human renal tubular cells through LC3II expression and autophagosomes visualization by electron microscopy. Autophagy is dependant on ER stress because various ER stress inducers activate autophagy, and salubrinal, an inhibitor of eIF2alpha dephosphorylation that protects cells against ER stress, inhibited LC3II expression. Furthermore, autophagy inhibition during CsA treatment with beclin1 siRNA significantly increases tubular cell death. Finally, immunohistochemical analysis of rat kidneys demonstrates a positive LC3 staining on injured tubular cells, suggesting that CsA induces autophagy in vivo. Taken together, these results demonstrate that CsA, through ER stress induction, activates autophagy as a protection against cell death.

  6. Tubular cell apoptosis and cidofovir-induced acute renal failure.

    PubMed

    Ortiz, Alberto; Justo, Pilar; Sanz, Ana; Melero, Rosa; Caramelo, Carlos; Guerrero, Manuel Fernández; Strutz, Frank; Müller, Gerhard; Barat, Antonio; Egido, Jesus

    2005-01-01

    Cidofovir is an antiviral drug with activity against a wide array of DNA viruses including poxvirus. The therapeutic use of cidofovir is marred by a dose-limiting side effect, nephrotoxicity, leading to proximal tubular cell injury and acute renal failure. Treatment with cidofovir requires the routine use of prophylactic measures. A correct knowledge of the cellular and molecular mechanisms of cidofovir toxicity may lead to the development of alternative prophylactic strategies. We recently cared for a patient with irreversible acute renal failure due to cidofovir. Renal biopsy showed tubular cell apoptosis. Cidofovir induced apoptosis in primary cultures of human proximal tubular cells in a temporal (peak apoptosis at 7 days) and concentration (10-40 microg/ml) pattern consistent with that of clinical toxicity. Apoptosis was identified by the presence of hypodiploid cells, by the exposure of annexin V binding sites and by morphological features and was associated with the appearance of active caspase-3 fragments. Cell death was specific as it was also present in a human proximal tubular epithelial cell line (HK-2), but not in a human kidney fibroblast cell line, and was prevented by probenecid. An inhibitor of caspase-3 (DEVD) prevented cidofovir apoptosis. The survival factors present in serum, insulin-like growth factor-1 and hepatocyte growth factor, were also protective. The present data suggest that apoptosis induction is a mechanism contributing to cidofovir nephrotoxicity. The prophylactic administration of factors with survival activity for tubular epithelium should be further explored in cidofovir renal injury.

  7. Urinary proteins of tubular origin: basic immunochemical and clinical aspects.

    PubMed

    Scherberich, J E

    1990-01-01

    A variety of tubular marker proteins, as compared to healthy controls, are excreted at an increased rate in the urine of patients with renal damage. Beside cytoplasmic glutathione-S-transferase and lysosomal beta-N-acetyl-glucosaminidase (beta-NAG) the majority of kidney-related urine proteins derives from membrane surface components of the most vulnerable proximal tubule epithelia, among them ala-(leu-gly)-aminopeptidase, gamma-glutamyl transpeptidase (GGT), the tubular portion of angiotensinase A, the major brush border glycoprotein 'SGP-240' and adenosine-deaminase-binding protein. Urinary tissue proteins, e.g. brush border (BB) microvilli, are immunologically identical with those antigens prepared from cell membranes of the human kidney itself. BB antigens are shed into the urine of patients with glomerulonephritis, interstitial nephritis, systemic diseases, e.g. systemic lupus erythematosus (SLE), diabetes mellitus and multiple myeloma, arterial hypertension, infectious diseases (malaria, AIDS) and after operations, renal grafting and administration of X-ray contrast media, aminoglycosides or certain cytostatics (cis-platinum). Tissue proteinuria of tubular proteins is determined by enzyme-kinetic or quantitative immunological assays applying either poly- or monoclonal antikidney antibodies. Clinical, ultrastructural and histochemical studies support the idea that both 'soluble' and high-molecular-weight membrane particles (vacuolar blebs, greater than 10(6) dalton) as well as microfilamental components of the epithelial cytoskeleton contribute to tubular 'histuria' which appears as a sensitive parameter in monitoring tubular damage under clinical conditions at a very early phase.

  8. Macrophage Stimulating Protein May Promote Tubular Regeneration after Acute Injury

    PubMed Central

    Cantaluppi, Vincenzo; Biancone, Luigi; Romanazzi, Giuseppe Mauriello; Figliolini, Federico; Beltramo, Silvia; Galimi, Francesco; Camboni, Maria Gavina; Deriu, Elisa; Conaldi, Piergiulio; Bottelli, Antonella; Orlandi, Viviana; Herrera, Maria Beatriz; Pacitti, Alfonso; Segoloni, Giuseppe Paolo; Camussi, Giovanni

    2008-01-01

    Macrophage-stimulating protein (MSP) exerts proliferative and antiapoptotic effects, suggesting that it may play a role in tubular regeneration after acute kidney injury. In this study, elevated plasma levels of MSP were found both in critically ill patients with acute renal failure and in recipients of renal allografts during the first week after transplantation. In addition, MSP and its receptor, RON, were markedly upregulated in the regenerative phase after glycerol-induced tubular injury in mice. In vitro, MSP stimulated tubular epithelial cell proliferation and conferred resistance to cisplatin-induced apoptosis by inhibiting caspase activation and modulating Fas, mitochondrial proteins, Akt, and extracellular signal–regulated kinase. MSP also enhanced migration, scattering, branching morphogenesis, tubulogenesis, and mesenchymal de-differentiation of surviving tubular cells. In addition, MSP induced an embryonic phenotype characterized by Pax-2 expression. In conclusion, MSP is upregulated during the regeneration of injured tubular cells, and it exerts multiple biologic effects that may aid recovery from acute kidney injury. PMID:18614774

  9. Autophagy Induces Prosenescent Changes in Proximal Tubular S3 Segments

    PubMed Central

    Baisantry, Arpita; Bhayana, Sagar; Rong, Song; Ermeling, Esther; Wrede, Christoph; Hegermann, Jan; Pennekamp, Petra; Sörensen-Zender, Inga; Haller, Hermann; Melk, Anette

    2016-01-01

    Evidence suggests that autophagy promotes the development of cellular senescence. Because cellular senescence contributes to renal aging and promotes the progression from AKI to CKD, we investigated the potential effect of tubular autophagy on senescence induction. Compared with kidneys from control mice, kidneys from mice with conditional deletion of autophagy-related 5 (Atg5) for selective ablation of autophagy in proximal tubular S3 segments (Atg5Δflox/Δflox) presented with significantly less tubular senescence, reduced interstitial fibrosis, and superior renal function 30 days after ischemia/reperfusion injury. To correlate this long-term outcome with differences in the early injury process, kidneys were analyzed 2 hours and 3 days after reperfusion. Notably, compared with kidneys of control mice, Atg5Δflox/Δflox kidneys showed more cell death in outer medullary S3 segments at 2 hours but less tubular damage and inflammation at day 3. These data suggest that the lack of autophagy prevents early survival mechanisms in severely damaged tubular cells. However, if such compromised cells persist, then they may lead to maladaptive repair and proinflammatory changes, thereby facilitating the development of a senescent phenotype and CKD. PMID:26487561

  10. Generation of kidney tubular organoids from human pluripotent stem cells

    PubMed Central

    Yamaguchi, Shintaro; Morizane, Ryuji; Homma, Koichiro; Monkawa, Toshiaki; Suzuki, Sayuri; Fujii, Shizuka; Koda, Muneaki; Hiratsuka, Ken; Yamashita, Maho; Yoshida, Tadashi; Wakino, Shu; Hayashi, Koichi; Sasaki, Junichi; Hori, Shingo; Itoh, Hiroshi

    2016-01-01

    Recent advances in stem cell research have resulted in methods to generate kidney organoids from human pluripotent stem cells (hPSCs), which contain cells of multiple lineages including nephron epithelial cells. Methods to purify specific types of cells from differentiated hPSCs, however, have not been established well. For bioengineering, cell transplantation, and disease modeling, it would be useful to establish those methods to obtain pure populations of specific types of kidney cells. Here, we report a simple two-step differentiation protocol to generate kidney tubular organoids from hPSCs with direct purification of KSP (kidney specific protein)-positive cells using anti-KSP antibody. We first differentiated hPSCs into mesoderm cells using a glycogen synthase kinase-3β inhibitor for 3 days, then cultured cells in renal epithelial growth medium to induce KSP+ cells. We purified KSP+ cells using flow cytometry with anti-KSP antibody, which exhibited characteristics of all segments of kidney tubular cells and cultured KSP+ cells in 3D Matrigel, which formed tubular organoids in vitro. The formation of tubular organoids by KSP+ cells induced the acquisition of functional kidney tubules. KSP+ cells also allowed for the generation of chimeric kidney cultures in which human cells self-assembled into 3D tubular structures in combination with mouse embryonic kidney cells. PMID:27982115

  11. Power generation characteristics of tubular type SOFC by wet process

    SciTech Connect

    Tajiri, H.; Nakayama, T.; Kuroishi, M.

    1996-12-31

    The development of a practical solid oxide fuel cell requires improvement of a cell performance and a cell manufacturing technology suitable for the mass production. In particular tubular type SOFC is thought to be superior in its reliability because its configuration can avoid the high temperature sealing and reduce the thermal stress resulting from the contact between cells. The authors have fabricated a tubular cell with an air electrode support by a wet processing technique, which is suitable for mass production in improving a power density. To enhance the power output of the module, the Integrated Tubular-Type (ITT) cell has been developed. This paper reports the performance of the single cells with various active anode areas and the bundle with series-connected 9-ITT cells with an active anode area of 840 cm{sup 2}.

  12. Extremely strong tubular stacking of aromatic oligoamide macrocycles

    SciTech Connect

    Kline, Mark A.; Wei, Xiaoxi; Horner, Ian J.; Liu, Rui; Chen, Shuang; Chen, Si; Yung, Ka Yi; Yamato, Kazuhiro; Cai, Zhonghou; Bright, Frank V.; Zeng, Xiao Cheng; Gong, Bing

    2015-01-01

    As the third-generation rigid macrocycles evolved from progenitor 1, cyclic aromatic oligoamides 3, with a backbone of reduced constraint, exhibit extremely strong stacking with an astoundingly high affinity (estimated lower limit of Kdimer > 1013 M-1 in CHCl3), which leads to dispersed tubular stacks that undergo further assembly in solution. Computational study reveals a very large binding energy (-49.77 kcal mol-1) and indicates highly cooperative local dipole interactions that account for the observed strength and directionality for the stacking of 3. In the solid-state, X-ray diffraction (XRD) confirms that the aggregation of 3 results in well-aligned tubular stacks. The persistent tubular assemblies of 3, with their non-deformable sub-nm pore, are expected to possess many interesting functions. One such function, transmembrane ion transport, is observed for 3.

  13. Extremely strong tubular stacking of aromatic oligoamide macrocycles

    DOE PAGES

    Kline, Mark A.; Wei, Xiaoxi; Horner, Ian J.; ...

    2015-01-01

    As the third-generation rigid macrocycles evolved from progenitor 1, cyclic aromatic oligoamides 3, with a backbone of reduced constraint, exhibit extremely strong stacking with an astoundingly high affinity (estimated lower limit of Kdimer > 1013 M-1 in CHCl3), which leads to dispersed tubular stacks that undergo further assembly in solution. Computational study reveals a very large binding energy (-49.77 kcal mol-1) and indicates highly cooperative local dipole interactions that account for the observed strength and directionality for the stacking of 3. In the solid-state, X-ray diffraction (XRD) confirms that the aggregation of 3 results in well-aligned tubular stacks. The persistentmore » tubular assemblies of 3, with their non-deformable sub-nm pore, are expected to possess many interesting functions. One such function, transmembrane ion transport, is observed for 3.« less

  14. Open–closed switching of synthetic tubular pores

    PubMed Central

    Kim, Yongju; Kang, Jiheong; Shen, Bowen; Wang, Yanqiu; He, Ying; Lee, Myongsoo

    2015-01-01

    While encouraging progress has been made on switchable nanopores to mimic biological channels and pores, it remains a great challenge to realize long tubular pores with a dynamic open–closed motion. Here we report μm-long, dynamic tubular pores that undergo rapid switching between open and closed states in response to a thermal signal in water. The tubular walls consist of laterally associated primary fibrils stacked from disc-shaped molecules in which the discs readily tilt by means of thermally regulated dehydration of the oligoether chains placed on the wall surfaces. Notably, this pore switching mediates a controlled water-pumping catalytic action for the dehydrative cyclization of adenosine monophosphate to produce metabolically active cyclic adenosine monophosphate. We believe that our work may allow the creation of a variety of dynamic pore structures with complex functions arising from open–closed motion. PMID:26456695

  15. Klinefelter's syndrome with renal tubular acidosis: impact on height.

    PubMed

    Jebasingh, F; Paul, T V; Spurgeon, R; Abraham, S; Jacob, J J

    2010-02-01

    A 19-year-old Indian man presented with a history of proximal muscle weakness, knock knees and gynaecomastia. On examination he had features of rickets and bilateral small testes. Karyotyping revealed a chromosomal pattern of 47,XXX, confirming the diagnosis of Klinefelter's syndrome. He was also found to have hyperchloraemic metabolic acidosis with hypokalaemia, hypophosphataemia, phosphaturia and glycosuria, which favoured a diagnosis of proximal renal tubular acidosis. Patients with Klinefelter's syndrome typically have a tall stature due to androgen deficiency, resulting in unfused epiphyses and an additional X chromosome. However, this patient had a short stature due to associated proximal renal tubular acidosis. To the best of our knowledge, this is the second case of Klinefelter's syndrome with short stature due to associated renal tubular acidosis reported in the literature. This report highlights the need to consider other causes when patients with Klinefelter's syndrome present with a short stature.

  16. Open-closed switching of synthetic tubular pores

    NASA Astrophysics Data System (ADS)

    Kim, Yongju; Kang, Jiheong; Shen, Bowen; Wang, Yanqiu; He, Ying; Lee, Myongsoo

    2015-10-01

    While encouraging progress has been made on switchable nanopores to mimic biological channels and pores, it remains a great challenge to realize long tubular pores with a dynamic open-closed motion. Here we report μm-long, dynamic tubular pores that undergo rapid switching between open and closed states in response to a thermal signal in water. The tubular walls consist of laterally associated primary fibrils stacked from disc-shaped molecules in which the discs readily tilt by means of thermally regulated dehydration of the oligoether chains placed on the wall surfaces. Notably, this pore switching mediates a controlled water-pumping catalytic action for the dehydrative cyclization of adenosine monophosphate to produce metabolically active cyclic adenosine monophosphate. We believe that our work may allow the creation of a variety of dynamic pore structures with complex functions arising from open-closed motion.

  17. Numerical study of cavitation flows inside a tubular pumping station

    NASA Astrophysics Data System (ADS)

    Tang, X. L.; Huang, W.; Wang, F. J.; Yang, W.; Wu, Y. L.

    2012-11-01

    Based on RNG k-epsilon turbulence model and the full cavitation model, the cavitation flows inside a low-head tubular-pump model were predicted by using the FLUENT software. For a operating case of given flow rate, cavitation happens near the inlet on the suction surfaces of the impeller blades at the initial cavitating stage, and the cavitating area spreads to the impeller passage and hub as NPSH (net positive suction head) decreases, which will affect energy transformation. For various operating cases of cavitation flows at the given flow rates, the predicted velocity and pressure distributions as well as the vapor volumetric fraction are systematically analyzed. Finally, the cavitation performance curve of the tubular-pump model is obtained by means of the further post-processing. All the comparisons and analysis can be further employed to optimize the hydraulic and structural design of the tubular pump and to guide its safe operation.

  18. Future Fixed Target Facilities

    SciTech Connect

    Melnitchouk, Wolodymyr

    2009-01-01

    We review plans for future fixed target lepton- and hadron-scattering facilities, including the 12 GeV upgraded CEBAF accelerator at Jefferson Lab, neutrino beam facilities at Fermilab, and the antiproton PANDA facility at FAIR. We also briefly review recent theoretical developments which will aid in the interpretation of the data expected from these facilities.

  19. Fixing Dataset Search

    NASA Technical Reports Server (NTRS)

    Lynnes, Chris

    2014-01-01

    Three current search engines are queried for ozone data at the GES DISC. The results range from sub-optimal to counter-intuitive. We propose a method to fix dataset search by implementing a robust relevancy ranking scheme. The relevancy ranking scheme is based on several heuristics culled from more than 20 years of helping users select datasets.

  20. Fixed mount wavefront sensor

    DOEpatents

    Neal, Daniel R.

    2000-01-01

    A rigid mount and method of mounting for a wavefront sensor. A wavefront dissector, such as a lenslet array, is rigidly mounted at a fixed distance relative to an imager, such as a CCD camera, without need for a relay imaging lens therebetween.

  1. Rap1 Ameliorates Renal Tubular Injury in Diabetic Nephropathy

    PubMed Central

    Xiao, Li; Zhu, Xuejing; Yang, Shikun; Liu, Fuyou; Zhou, Zhiguang; Zhan, Ming; Xie, Ping; Zhang, Dongshan; Li, Jun; Song, Panai; Kanwar, Yashpal S.; Sun, Lin

    2014-01-01

    Rap1b ameliorates high glucose (HG)-induced mitochondrial dysfunction in tubular cells. However, its role and precise mechanism in diabetic nephropathy (DN) in vivo remain unclear. We hypothesize that Rap1 plays a protective role in tubular damage of DN by modulating primarily the mitochondria-derived oxidative stress. The role and precise mechanisms of Rap1b on mitochondrial dysfunction and of tubular cells in DN were examined in rats with streptozotocin (STZ)-induced diabetes that have Rap1b gene transfer using an ultrasound microbubble-mediated technique as well as in renal proximal epithelial tubular cell line (HK-2) exposed to HG ambiance. The results showed that Rap1b expression decreased significantly in tubules of renal biopsies from patients with DN. Overexpression of a constitutively active Rap1b G12V notably ameliorated renal tubular mitochondrial dysfunction, oxidative stress, and apoptosis in the kidneys of STZ-induced rats, which was accompanied with increased expression of transcription factor C/EBP-β and PGC-1α. Furthermore, Rap1b G12V also decreased phosphorylation of Drp-1, a key mitochondrial fission protein, while boosting the expression of genes related to mitochondrial biogenesis and antioxidants in HK-2 cells induced by HG. These effects were imitated by transfection with C/EBP-β or PGC-1α short interfering RNA. In addition, Rap1b could modulate C/EBP-β binding to the endogenous PGC-1α promoter and the interaction between PGC-1α and catalase or mitochondrial superoxide dismutase, indicating that Rap1b ameliorates tubular injury and slows the progression of DN by modulation of mitochondrial dysfunction via C/EBP-β–PGC-1α signaling. PMID:24353183

  2. Hot fire test results of subscale tubular combustion chambers

    NASA Technical Reports Server (NTRS)

    Kazaroff, John M.; Jankovsky, Robert S.; Pavli, Albert J.

    1992-01-01

    Advanced, subscale, tubular combustion chambers were built and test fired with hydrogen-oxygen propellants to assess the increase in fatigue life that can be obtained with this type of construction. Two chambers were tested: one ran for 637 cycles without failing, compared to a predicted life of 200 cycles for a comparable smooth-wall milled-channel liner configuration. The other chamber failed at 256 cycles, compared to a predicted life of 118 cycles for a comparable smooth-wall milled-channel liner configuration. Posttest metallographic analysis determined that the strain-relieving design (structural compliance) of the tubular configuration was the cause of this increase in life.

  3. Low-cost tubular antenna deployer for WISP-2

    NASA Technical Reports Server (NTRS)

    Warden, Robert M.

    1995-01-01

    A new tubular boom deployment mechanism has been designed, built, and flown as part of the second Waves In Space Program (WISP-2) through Cornell University. For this program, two booms were needed to form a dipole antenna but existing units were found to be too complicated and costly. A low-cost alternative was developed which combined flight-proven tubular boom technology with a new support and deployment mechanism. The simplicity of this new design was a major factor in providing a highly reliable and cost-effective system.

  4. A Case Report of a Giant Tubular Adenoma With a Concurrent Fibroadenoma of the Breast

    PubMed Central

    Kalipatnapu, Sasank; Samuel, Vimalin; Johnson, Martha; Perookavil Daniel, Koshy

    2015-01-01

    Tubular adenomas are rare benign epithelial tumors of the breast. Only a handful of cases have been reported in literature. We describe a very rare case of a giant tubular adenoma with a concurrent fibroadenoma in a young woman.

  5. Expanding hollow metal rings

    DOEpatents

    Peacock, Harold B [Evans, GA; Imrich, Kenneth J [Grovetown, GA

    2009-03-17

    A sealing device that may expand more planar dimensions due to internal thermal expansion of a filler material. The sealing material is of a composition such that when desired environment temperatures and internal actuating pressures are reached, the sealing materials undergoes a permanent deformation. For metallic compounds, this permanent deformation occurs when the material enters the plastic deformation phase. Polymers, and other materials, may be using a sealing mechanism depending on the temperatures and corrosivity of the use. Internal pressures are generated by either rapid thermal expansion or material phase change and may include either liquid or solid to gas phase change, or in the gaseous state with significant pressure generation in accordance with the gas laws. Sealing material thickness and material composition may be used to selectively control geometric expansion of the seal such that expansion is limited to a specific facing and or geometric plane.

  6. Mechanically expandable annular seal

    DOEpatents

    Gilmore, R.F.

    1983-07-19

    A mechanically expandable annular reusable seal assembly to form an annular hermetic barrier between two stationary, parallel, and planar containment surfaces is described. A rotatable ring, attached to the first surface, has ring wedges resembling the saw-tooth array of a hole saw. Matching seal wedges are slidably attached to the ring wedges and have their motion restricted to be perpendicular to the second surface. Each seal wedge has a face parallel to the second surface. An annular elastomer seal has a central annular region attached to the seal wedges' parallel faces and has its inner and outer circumferences attached to the first surface. A rotation of the ring extends the elastomer seal's central region perpendicularly towards the second surface to create the fluid tight barrier. A counter rotation removes the barrier. 6 figs.

  7. Mechanically expandable annular seal

    DOEpatents

    Gilmore, Richard F.

    1983-01-01

    A mechanically expandable annular reusable seal assembly to form an annular hermetic barrier between two stationary, parallel, and planar containment surfaces. A rotatable ring, attached to the first surface, has ring wedges resembling the saw-tooth array of a hole saw. Matching seal wedges are slidably attached to the ring wedges and have their motion restricted to be perpendicular to the second surface. Each seal wedge has a face parallel to the second surface. An annular elastomer seal has a central annular region attached to the seal wedges' parallel faces and has its inner and outer circumferences attached to the first surface. A rotation of the ring extends the elastomer seal's central region perpendicularly towards the second surface to create the fluidtight barrier. A counterrotation removes the barrier.

  8. Fixed solar collection system

    SciTech Connect

    Tipton, H.R.

    1984-07-31

    A fixed solar energy collector system has facing panels of different size forming a Vee-shaped trough open at its base and supporting a plurality of highly reflective convex reflectors strategically disposed upon said panels in reflective relationship to a plurality of Fresnel lenses positioned at the base of the trough. A suitable reflector, disposed beneath the Fresnel lenses, directs the reflected energy to a heat-needy target.

  9. Fixed pitch wind turbines

    NASA Technical Reports Server (NTRS)

    Fenn, D. B.; Viterna, L. A.

    1978-01-01

    Wind turbines designed for fixed pitch operation offer potential reductions in the cost of the machine by eliminating many costly components. It was shown that a rotor can be designed which produces the same energy annually as Mod-0 but which regulates its power automatically by progressively stalling the blades as wind speed increases. Effects of blade twist, taper, root cutout, and airfoil shape on performance are discussed as well as various starting technqiues.

  10. Neutrophilic Fixed Drug Eruption.

    PubMed

    Waldman, Leah; Reddy, Swathi B; Kassim, Andrea; Dettloff, Jennifer; Reddy, Vijaya B

    2015-07-01

    Fixed drug eruption (FDE) is a cutaneous reaction to a medication that recurs in the same fairly localized site with each exposure to the offending drug. The classical histopathologic findings in FDE consist of an interface dermatitis with predominantly lymphocytic inflammatory cell infiltrate. An unusual case of FDE in a 27-year-old pregnant woman who presented with widespread lesions and a predominantly neutrophilic infiltrate on histopathologic examination is reported.

  11. AUTOLOGOUS IMMUNE COMPLEX NEPHRITIS INDUCED WITH RENAL TUBULAR ANTIGEN

    PubMed Central

    Glassock, Richard J.; Edgington, Thomas S.; Watson, J. Ian; Dixon, Frank J.

    1968-01-01

    The pathogenetic mechanism involved in a form of experimental allergic glomerulonephritis induced by immunization of rats with renal tubular antigen has been investigated. A single immunization with less than a milligram of a crude renal tubular preparation, probably containing less than 25 µg of the specific nephritogenic antigen, is effective in the induction of this form of chronic membranous glomerulonephritis. In the nephritic kidney autologous nephritogenic tubular antigen is found in the glomerular deposits along with γ-globulin and complement. When large amounts of antigen are injected during induction of the disease the exogenous immunizing antigen can also be detected in the glomerular deposits. It appears that this disease results from the formation of circulating antibodies capable of reacting with autologous renal tubular antigen(s) and the deposition of these antibodies and antigen(s) plus complement apparently as immune complexes in the glomeruli. This pathogenetic system has been termed an autologous immune complex disease and the resultant glomerulonephritis has been similarly designated. PMID:4169966

  12. Hollow tubular porous covalent organic framework (COF) nanostructures.

    PubMed

    Pachfule, Pradip; Kandmabeth, Sharath; Mallick, Arijit; Banerjee, Rahul

    2015-07-25

    Hollow and tubular TpPa-COF structures have been synthesized by template-assisted replication of nanometer sized ZnO-nanorods. The hollow structures composed of microporous TpPa shells have high periodicity, moderate porosity, chemical stability and capsule shaped morphology as revealed by X-ray diffraction, porosity measurements, and SEM and TEM analyses.

  13. Tubular surface segmentation for extracting anatomical structures from medical imagery.

    PubMed

    Mohan, Vandana; Sundaramoorthi, Ganesh; Tannenbaum, Allen

    2010-12-01

    This work provides a model for tubular structures, and devises an algorithm to automatically extract tubular anatomical structures from medical imagery. Our model fits many anatomical structures in medical imagery, in particular, various fiber bundles in the brain (imaged through diffusion-weighted magnetic resonance (DW-MRI)) such as the cingulum bundle, and blood vessel trees in computed tomography angiograms (CTAs). Extraction of the cingulum bundle is of interest because of possible ties to schizophrenia, and extracting blood vessels is helpful in the diagnosis of cardiovascular diseases. The tubular model we propose has advantages over many existing approaches in literature: fewer degrees-of-freedom over a general deformable surface hence energies defined on such tubes are less sensitive to undesirable local minima, and the tube (in 3-D) can be naturally represented by a 4-D curve (a radius function and centerline), which leads to computationally less costly algorithms and has the advantage that the centerline of the tube is obtained without additional effort. Our model also generalizes to tubular trees, and the extraction algorithm that we design automatically detects and evolves branches of the tree. We demonstrate the performance of our algorithm on 20 datasets of DW-MRI data and 32 datasets of CTA, and quantify the results of our algorithm when expert segmentations are available.

  14. Hemodynamic and tubular changes induced by contrast media.

    PubMed

    Caiazza, Antonella; Russo, Luigi; Sabbatini, Massimo; Russo, Domenico

    2014-01-01

    The incidence of acute kidney injury induced by contrast media (CI-AKI) is the third cause of AKI in hospitalized patients. Contrast media cause relevant alterations both in renal hemodynamics and in renal tubular cell function that lead to CI-AKI. The vasoconstriction of intrarenal vasculature is the main hemodynamic change induced by contrast media; the vasoconstriction is accompanied by a cascade of events leading to ischemia and reduction of glomerular filtration rate. Cytotoxicity of contrast media causes apoptosis of tubular cells with consequent formation of casts and worsening of ischemia. There is an interplay between the negative effects of contrast media on renal hemodynamics and on tubular cell function that leads to activation of renin-angiotensin system and increased production of reactive oxygen species (ROS) within the kidney. Production of ROS intensifies cellular hypoxia through endothelial dysfunction and alteration of mechanisms regulating tubular cells transport. The physiochemical characteristics of contrast media play a critical role in the incidence of CI-AKI. Guidelines suggest the use of either isoosmolar or low-osmolar contrast media rather than high-osmolar contrast media particularly in patients at increased risk of CI-AKI. Older age, presence of atherosclerosis, congestive heart failure, chronic renal disease, nephrotoxic drugs, and diuretics may multiply the risk of CI-AKI.

  15. Cystinosis (ctns) zebrafish mutant shows pronephric glomerular and tubular dysfunction

    PubMed Central

    Elmonem, Mohamed A.; Khalil, Ramzi; Khodaparast, Ladan; Khodaparast, Laleh; Arcolino, Fanny O.; Morgan, Joseph; Pastore, Anna; Tylzanowski, Przemko; Ny, Annelii; Lowe, Martin; de Witte, Peter A.; Baelde, Hans J.; van den Heuvel, Lambertus P.; Levtchenko, Elena

    2017-01-01

    The human ubiquitous protein cystinosin is responsible for transporting the disulphide amino acid cystine from the lysosomal compartment into the cytosol. In humans, Pathogenic mutations of CTNS lead to defective cystinosin function, intralysosomal cystine accumulation and the development of cystinosis. Kidneys are initially affected with generalized proximal tubular dysfunction (renal Fanconi syndrome), then the disease rapidly affects glomeruli and progresses towards end stage renal failure and multiple organ dysfunction. Animal models of cystinosis are limited, with only a Ctns knockout mouse reported, showing cystine accumulation and late signs of tubular dysfunction but lacking the glomerular phenotype. We established and characterized a mutant zebrafish model with a homozygous nonsense mutation (c.706 C > T; p.Q236X) in exon 8 of ctns. Cystinotic mutant larvae showed cystine accumulation, delayed development, and signs of pronephric glomerular and tubular dysfunction mimicking the early phenotype of human cystinotic patients. Furthermore, cystinotic larvae showed a significantly increased rate of apoptosis that could be ameliorated with cysteamine, the human cystine depleting therapy. Our data demonstrate that, ctns gene is essential for zebrafish pronephric podocyte and proximal tubular function and that the ctns-mutant can be used for studying the disease pathogenic mechanisms and for testing novel therapies for cystinosis. PMID:28198397

  16. Molecular tectonics: tubular crystals with controllable channel size and orientation.

    PubMed

    Lin, Mei-Jin; Jouaiti, Abdelaziz; Pocic, David; Kyritsakas, Nathalie; Planeix, Jean-Marc; Hosseini, Mir Wais

    2010-01-07

    The combination of flexible neutral organic tectons based on two pyridines interconnected by a thioether or thioester type spacer with an inorganic ZnSiF(6) pillar leads to the formation of 2-D coordination networks and the packing of the latter generates crystals offering controllable tubular channels with imposed orientation along the pillar axis.

  17. Nonlinear Analysis of Bonded Composite Tubular Lap Joints

    NASA Technical Reports Server (NTRS)

    Oterkus, E.; Madenci, E.; Smeltzer, S. S., III; Ambur, D. R.

    2005-01-01

    The present study describes a semi-analytical solution method for predicting the geometrically nonlinear response of a bonded composite tubular single-lap joint subjected to general loading conditions. The transverse shear and normal stresses in the adhesive as well as membrane stress resultants and bending moments in the adherends are determined using this method. The method utilizes the principle of virtual work in conjunction with nonlinear thin-shell theory to model the adherends and a cylindrical shear lag model to represent the kinematics of the thin adhesive layer between the adherends. The kinematic boundary conditions are imposed by employing the Lagrange multiplier method. In the solution procedure, the displacement components for the tubular joint are approximated in terms of non-periodic and periodic B-Spline functions in the longitudinal and circumferential directions, respectively. The approach presented herein represents a rapid-solution alternative to the finite element method. The solution method was validated by comparison against a previously considered tubular single-lap joint. The steep variation of both peeling and shearing stresses near the adhesive edges was successfully captured. The applicability of the present method was also demonstrated by considering tubular bonded lap-joints subjected to pure bending and torsion.

  18. On the flooding limit in the evaporative, tubular thermosyphon

    NASA Astrophysics Data System (ADS)

    Lock, G. S. H.

    1993-02-01

    The note provides an appraisal of the essential physics accompanying the flooding limit in the evaporative, tubular thermosyphon. It is suggested that flooding is characterized, in general, by a balance between inertial, buoyancy and surface tension forces acting on curved liquid-vapor interfaces. The fundamental role of the Bond, Froude, Weber and Kutateladze numbers is discussed.

  19. Renal tubular leakage complicating microcephalic osteodysplastic primordial dwarfism.

    PubMed Central

    Eason, J; Hall, C M; Trounce, J Q

    1995-01-01

    We describe a male infant with phenotypic and radiological features of microcephalic osteodysplastic primordial dwarfism type I/III. He showed severe osteoporosis and biochemical derangement owing to renal tubular leakage, which has not previously been reported in this condition. He died aged 5 months. Images PMID:7783178

  20. 75 FR 3248 - Certain Oil Country Tubular Goods From China

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-01-20

    ... COMMISSION Certain Oil Country Tubular Goods From China Determination On the basis of the record \\1... industry in the United States is threatened with material injury by reason of imports from China of certain... Commerce ] (Commerce) to be subsidized by the Government of China. 2 3 \\1\\ The record is defined in...

  1. Albumin Is Recycled from the Primary Urine by Tubular Transcytosis

    PubMed Central

    Tenten, Verena; Menzel, Sylvia; Kunter, Uta; Sicking, Eva-Maria; van Roeyen, Claudia R. C.; Sanden, Silja K.; Kaldenbach, Michaela; Boor, Peter; Fuss, Astrid; Uhlig, Sandra; Lanzmich, Regina; Willemsen, Brigith; Dijkman, Henry; Grepl, Martin; Wild, Klemens; Kriz, Wilhelm; Smeets, Bart; Floege, Jürgen

    2013-01-01

    Under physiologic conditions, significant amounts of plasma protein pass the renal filter and are reabsorbed by proximal tubular cells, but it is not clear whether the endocytosed protein, particularly albumin, is degraded in lysosomes or returned to the circulatory system intact. To resolve this question, a transgenic mouse with podocyte-specific expression of doxycycline-inducible tagged murine albumin was developed. To assess potential glomerular backfiltration, two types of albumin with different charges were expressed. On administration of doxycycline, podocytes expressed either of the two types of transgenic albumin, which were secreted into the primary filtrate and reabsorbed by proximal tubular cells, resulting in serum accumulation. Renal transplantation experiments confirmed that extrarenal transcription of transgenic albumin was unlikely to account for these results. Genetic deletion of the neonatal Fc receptor (FcRn), which rescues albumin and IgG from lysosomal degradation, abolished transcytosis of both types of transgenic albumin and IgG in proximal tubular cells. In summary, we provide evidence of a transcytosis within the kidney tubular system that protects albumin and IgG from lysosomal degradation, allowing these proteins to be recycled intact. PMID:23970123

  2. An Improved Design of a Simple Tubular Reactor Experiment.

    ERIC Educational Resources Information Center

    Asfour, Abdul-Fattah A.

    1985-01-01

    Background information, procedures used, and typical results obtained are provided for an experiment which: (1) examines the effect of residence time on conversion in a tubular flow reactor; and (2) compares the experimental conversions with those obtained from plug-flow and laminar-flow reactor models. (JN)

  3. Renal pathophysiologic role of cortical tubular inclusion bodies.

    PubMed

    Radi, Zaher A; Stewart, Zachary S; Grzemski, Felicity A; Bobrowski, Walter F

    2013-01-01

    Renal tubular inclusion bodies are rarely associated with drug administration. The authors describe the finding of renal cortical tubular intranuclear and intracytoplasmic inclusion bodies associated with the oral administration of a norepinephrine/serotonin reuptake inhibitor (NSRI) test article in Sprague-Dawley (SD) rats. Rats were given an NSRI daily for 4 weeks, and kidney histopathologic, ultrastructural pathology, and immunohistochemical examinations were performed. Round eosinophilic intranuclear inclusion bodies were observed histologically in the tubular epithelial cells of the renal cortex in male and female SD rats given the NSRI compound. No evidence of degeneration or necrosis was noted in the inclusion-containing renal cells. By ultrastructural pathology, inclusion bodies consisted of finely granular, amorphous, and uniformly stained nonmembrane-bound material. By immunohistochemistry, inclusion bodies stained positive for d-amino acid oxidase (DAO) protein. In addition, similar inclusion bodies were noted in the cytoplasmic tubular epithelial compartment by ultrastructural and immunohistochemical examination.  This is the first description of these renal inclusion bodies after an NSRI test article administration in SD rats. Such drug-induced renal inclusion bodies are rat-specific, do not represent an expression of nephrotoxicity, represent altered metabolism of d-amino acids, and are not relevant to human safety risk assessment.

  4. Column compression strength of tubular packaging forms made from paper

    Treesearch

    Thomas J. Urbanik; Sung K. Lee; Charles G. Johnson

    2006-01-01

    Tubular packaging forms fabricated and shaped from rolled paper are used as reinforcing corner posts for major appliances packaged in corrugated containers. Tests of column compression strength simulate the expected performance loads from appliances stacked in warehouses. Column strength depends on tube geometry, paper properties, basis weight, and number of...

  5. Osteomalacia associated with increased renal tubular resorption of phosphate (hypohyperparathyroidism)

    PubMed Central

    Kanis, J. A.; Walton, R. J.

    1976-01-01

    A 12-year-old girl, who presented with joint pains, was found to have hypocalcaemia, hyperphosphataemia due to increased renal tubular reabsorption, increased serum alkaline phosphatase activity, and osteomalacia. These features, which resemble those found in so-called hypohyperparathyroidism, were all rapidly reversed by small doses of cholecalciferol. PMID:183195

  6. Tubular Surface Segmentation for Extracting Anatomical Structures From Medical Imagery

    PubMed Central

    Sundaramoorthi, Ganesh; Tannenbaum, Allen

    2011-01-01

    This work provides a model for tubular structures, and devises an algorithm to automatically extract tubular anatomical structures from medical imagery. Our model fits many anatomical structures in medical imagery, in particular, various fiber bundles in the brain (imaged through diffusion-weighted magnetic resonance (DW-MRI)) such as the cingulum bundle, and blood vessel trees in computed tomography angiograms (CTAs). Extraction of the cingulum bundle is of interest because of possible ties to schizophrenia, and extracting blood vessels is helpful in the diagnosis of cardiovascular diseases. The tubular model we propose has advantages over many existing approaches in literature: fewer degrees-of-freedom over a general deformable surface hence energies defined on such tubes are less sensitive to undesirable local minima, and the tube (in 3-D) can be naturally represented by a 4-D curve (a radius function and centerline), which leads to computationally less costly algorithms and has the advantage that the centerline of the tube is obtained without additional effort. Our model also generalizes to tubular trees, and the extraction algorithm that we design automatically detects and evolves branches of the tree. We demonstrate the performance of our algorithm on 20 datasets of DW-MRI data and 32 datasets of CTA, and quantify the results of our algorithm when expert segmentations are available. PMID:21118754

  7. Tubular Ectasia of the Rete Testis: A Diagnostic Dilemma

    PubMed Central

    Nair, Rajesh; Abbaraju, J; Rajbabu, K; Anjum, F; Sriprasad, S

    2008-01-01

    Tubular ectasia of the rete testis is a pathologically benign process with complex and varied aetiology. It must be differentiated from neoplastic disease of the testis clinically with patient age, mode of presentation, tumour marker status and the characteristic ultrasound and Doppler study findings. Awareness and diagnosis of this clinical entity can prevent unnecessary surgical intervention in these patients. PMID:18831860

  8. Nonlinear Analysis of Bonded Composite Tubular Lap Joints

    NASA Technical Reports Server (NTRS)

    Oterkus, E.; Madenci, E.; Smeltzer, S. S., III; Ambur, D. R.

    2005-01-01

    The present study describes a semi-analytical solution method for predicting the geometrically nonlinear response of a bonded composite tubular single-lap joint subjected to general loading conditions. The transverse shear and normal stresses in the adhesive as well as membrane stress resultants and bending moments in the adherends are determined using this method. The method utilizes the principle of virtual work in conjunction with nonlinear thin-shell theory to model the adherends and a cylindrical shear lag model to represent the kinematics of the thin adhesive layer between the adherends. The kinematic boundary conditions are imposed by employing the Lagrange multiplier method. In the solution procedure, the displacement components for the tubular joint are approximated in terms of non-periodic and periodic B-Spline functions in the longitudinal and circumferential directions, respectively. The approach presented herein represents a rapid-solution alternative to the finite element method. The solution method was validated by comparison against a previously considered tubular single-lap joint. The steep variation of both peeling and shearing stresses near the adhesive edges was successfully captured. The applicability of the present method was also demonstrated by considering tubular bonded lap-joints subjected to pure bending and torsion.

  9. Double breasting spongioplasty in tubularized/tubularized incise plate urethroplasty: A new technique

    PubMed Central

    Bhat, Amilal; Bhat, Mahakshit; Kumar, Rajeev; Bhat, Akshita

    2017-01-01

    Introduction: The main disadvantage of currently described techniques of spongioplasty is superimposition of 3 suture lines (neourethra, spongioplasty, and skin closure) which is likely to increase the chances of a fistula. We describe and evaluate the results of a double breasting spongioplasty in urethroplasty. Methods: A prospective study of 60 primary hypospadias was undertaken by double breasting spongioplasty from August 2012 to March 2014. Mobilization of the urethral plate and the spongiosum is done by creating a plane just proximal to the meatus. Double breasting spongioplasty is done after tubularization of urethral plate. First layer of spongiosum is sutured toward lateral side of the neourethra covering the suture line. A second double breasting layer is sutured over the first layer with its suture line toward the opposite side covering the suture line of the first layer; thus avoiding overlapping of suture lines of all the three layers. Results: Age of the patients varied from 10 months to 16 years with a mean and median of 3.73 and 3.50 years, respectively. Hypospadias was distal, mid, and proximal in 38, 10, and 12 cases, respectively. Chordee was noticed in 35 cases and torque in 28 cases. Overall complication rate was 5% and fistula rate was 1.66%. Conclusions: Double breasting spongioplasty avoids superimposition of suture line and adds two layers of spongiosum over neourethra, thus decreases the chances of urethral fistula and gives cylindrical shape to neourethra. PMID:28197032

  10. Geochemical characterization of tubular alteration features in subseafloor basalt glass

    NASA Astrophysics Data System (ADS)

    Knowles, Emily; Staudigel, Hubert; Templeton, Alexis

    2013-07-01

    There are numerous indications that subseafloor basalts may currently host a huge quantity of active microbial cells and contain biosignatures of ancient life in the form of physical and chemical basalt glass alteration. Unfortunately, technological challenges prevent us from observing the formation and mineralization of these alteration features in situ, or reproducing tubular basalt alteration processes in the laboratory. Therefore, comprehensive analysis of the physical and chemical traces retained in mineralized tubules is currently the best approach for deciphering a record of glass alteration. We have used a number of high-resolution spectroscopic and microscopic methods to probe the geochemical and mineralogical characteristics of tubular alteration features in basalt glasses obtained from a suite of subseafloor drill cores that covers a range of different collection locations and ages. By combining three different synchrotron-based X-ray measurements - X-ray fluorescence microprobe mapping, XANES spectroscopy, and μ-XRD - with focused ion beam milling and transmission electron microscopy, we have spatially resolved the major and trace element distributions, as well as the oxidation state of Fe, determined the coordination chemistry of Fe, Mn and Ti at the micron-scale, and constrained the secondary minerals within these features. The tubular alteration features are characterized by strong losses of Fe2+, Mn2+, and Ca2+ compared to fresh glass, oxidation of the residual Fe, and the accumulation of Ti and Cu. The predominant phases infilling the alteration regions are Fe3+-bearing silicates dominated by 2:1 clays, with secondary Fe- and Ti-oxides, and a partially oxidized Mn-silicate phase. These geochemical patterns observed within the tubular alteration features are comparable across a diverse suite of samples formed over the past 5-100 Ma, which shows that the microscale mineralization processes are common and consistent throughout the ocean basins and

  11. 75 FR 28058 - Certain Oil Country Tubular Goods From China; Determination

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-05-19

    ... COMMISSION Certain Oil Country Tubular Goods From China; Determination On the basis of the record \\1... oil country tubular goods (``OCTG''), primarily provided for in subheadings 7304.29, 7305.20, and 7306...), entitled Certain Oil Country Tubular Goods From China: Investigation No. 731-TA- 1159 (Final). By order of...

  12. Lateral Diffusion on Tubular Membranes: Quantification of Measurements Bias

    PubMed Central

    Sandrin, Fanny; Izeddin, Ignacio; Bassereau, Patricia; Triller, Antoine

    2011-01-01

    Single Particle Tracking (SPT) is a powerful technique for the analysis of the lateral diffusion of the lipid and protein components of biological membranes. In neurons, SPT allows the study of the real-time dynamics of receptors for neurotransmitters that diffuse continuously in and out synapses. In the simplest case where the membrane is flat and is parallel to the focal plane of the microscope the analysis of diffusion from SPT data is relatively straightforward. However, in most biological samples the membranes are curved, which complicates analysis and may lead to erroneous conclusions as for the mode of lateral diffusion. Here we considered the case of lateral diffusion in tubular membranes, such as axons, dendrites or the neck of dendritic spines. Monte Carlo simulations allowed us to evaluate the error in diffusion coefficient (D) calculation if the curvature is not taken into account. The underestimation is determined by the diameter of the tubular surface, the frequency of image acquisition and the degree of mobility itself. We found that projected trajectories give estimates that are 25 to 50% lower than the real D in case of 2D-SPT over the tubular surface. The use of 3D-SPT improved the measurements if the frequency of image acquisition was fast enough in relation to the mobility of the molecules and the diameter of the tube. Nevertheless, the calculation of D from the components of displacements in the axis of the tubular structure gave accurate estimate of D, free of geometrical artefacts. We show the application of this approach to analyze the diffusion of a lipid on model tubular membranes and of a membrane-bound GFP on neurites from cultured rat hippocampal neurons. PMID:21980531

  13. Lateral diffusion on tubular membranes: quantification of measurements bias.

    PubMed

    Renner, Marianne; Domanov, Yegor; Sandrin, Fanny; Izeddin, Ignacio; Bassereau, Patricia; Triller, Antoine

    2011-01-01

    Single Particle Tracking (SPT) is a powerful technique for the analysis of the lateral diffusion of the lipid and protein components of biological membranes. In neurons, SPT allows the study of the real-time dynamics of receptors for neurotransmitters that diffuse continuously in and out synapses. In the simplest case where the membrane is flat and is parallel to the focal plane of the microscope the analysis of diffusion from SPT data is relatively straightforward. However, in most biological samples the membranes are curved, which complicates analysis and may lead to erroneous conclusions as for the mode of lateral diffusion. Here we considered the case of lateral diffusion in tubular membranes, such as axons, dendrites or the neck of dendritic spines. Monte Carlo simulations allowed us to evaluate the error in diffusion coefficient (D) calculation if the curvature is not taken into account. The underestimation is determined by the diameter of the tubular surface, the frequency of image acquisition and the degree of mobility itself. We found that projected trajectories give estimates that are 25 to 50% lower than the real D in case of 2D-SPT over the tubular surface. The use of 3D-SPT improved the measurements if the frequency of image acquisition was fast enough in relation to the mobility of the molecules and the diameter of the tube. Nevertheless, the calculation of D from the components of displacements in the axis of the tubular structure gave accurate estimate of D, free of geometrical artefacts. We show the application of this approach to analyze the diffusion of a lipid on model tubular membranes and of a membrane-bound GFP on neurites from cultured rat hippocampal neurons.

  14. Renal tubular function in children with beta-thalassemia minor.

    PubMed

    Kalman, Süleyman; Atay, A Avni; Sakallioglu, Onur; Ozgürtaş, Taner; Gök, Faysal; Kurt, Ismail; Kürekçi, A Emin; Ozcan, Okan; Gökçay, Erdal

    2005-10-01

    beta-thalassemia minor is a common heterozygous haemoglobinopathy that is characterized by both microcytosis and hypochromia. It requires no treatment. It has been postulated that low-grade haemolysis, tubular iron deposition and toxins derived from erythrocytes might cause renal tubular damage in adult patients with beta-thalassemia minor. Our aim was to investigate the renal tubular functions in children with beta-thalassemia minor and to determine its possible harmful effects. The study was conducted on 32 children (14 female and 18 male) at the age of 5.8 +/- 3.1 years (range 2-14 years) with beta-thalassemia minor. The patients were classified as anaemic (haemoglobin (Hb) 11 g/dL) (Group 2, n = 18). A control group was formed with 18 healthy children whose ages and sexes match those in other groups (Group 3, n = 18). Fractional excretion of sodium (FE(Na), %), fractional excretion of magnesium (FE(Mg), %), fractional excretion of uric acid (FE(UA), %) and tubular phosphorus reabsorption (TPR,%) were calculated with standard formulas. Urinary calcium excretion (mg/kg per 24 h), zinc (Zn) (microg/dL), glucosuria (mg/dL), beta-2 microglobulin (mg/dL) and N-acetyl-beta-D-glycosaminidase (NAG, U/mmol creatinine) levels were measured through biochemical methods. There was no statistically significant difference among the three groups in terms of the results of FE(Na) (%), FE(Mg) (%), FE(UA) (%), TPR (%), calciuria (mg/kg per 24 h), NAG, urine Zn, proteinuria, glucosuria or urine beta- 2 microglobulin levels (P > 0.05). On the contrary of children with beta-thalassemia major, renal tubular dysfunction has not been determined in children with beta-thalassemia minor in the present study.

  15. sup 99m Tc renal tubular function agents: Current status

    SciTech Connect

    Eshima, D.; Fritzberg, A.R.; Taylor, A. Jr. )

    1990-01-01

    Orthoiodohippuric (OIH) acid labeled with 131I is a widely used renal radiopharmaceutical agent and has been the standard radiopharmaceutical agent for the measurement of effective renal plasma flow (EPRF). Limitations to the routine clinical use of 131I OIH are related to the suboptimal imaging properties of the 131I radionuclide and its relatively high radiation dose. 123I has been substituted for 131I; however, its high cost and short shelf-life have limited its widespread use. Recent work has centered on the development of a new 99mTc renal tubular function agent, which would use the optimal radionuclidic properties and availability of 99mTc and combine the clinical information provided by OIH. The search for a suitable 99mTc renal tubular function agent has focused on the diamide dithiolate (N2S2), the paraaminohippuric iminodiacetic acid (PAHIDA), and the triamide mercaptide (N3S) donor ligand systems. To date, the most promising 99mTc tubular function agent is the N3S complex: 99mTc mercaptoacetyltriglycine (99mTc MAG3). Studies in animal models in diuresis, dehydration, acid or base imbalance, ischemia, and renal artery stenosis demonstrate that 99mTc MAG3 behaves similarly to 131I OIH. A simple kit formulation is available that yields the 99mTc MAG3 complex in high radiochemical purity. Studies in normal subjects and patients indicate that 99mTc MAG3 is an excellent 99mTc renal tubular agent, but its plasma clearance is only 50% to 60% that of OIH. In an effort to develop an improved 99mTc renal tubular function agent, changes have been made in the core N3S donor ligand system, but to date no agent has been synthesized that is clinically superior to 99mTc MAG3. 61 references.

  16. Soviet gas processing expands

    SciTech Connect

    Sagers, M.J.

    1987-09-01

    The Soviet gas processing industry expanded with the recent completion of two new gas processing plants, the Krasnoleninskiy and Noyabr'sk plants, both located in West Siberia. Both process associated gas from nearby oil fields to remove valuable liquid hydrocarbons before putting the dry gas into pipelines; previously the gas was flared or vented. These plants represent part of a major program, ongoing since the 1970s, to increase the level of utilization of the tremendous amount of valuable associated gas now being produced in West Siberia. Another major effort to develop gas processing is under way in western Kazakhstan at the Tengiz and Zhanazhol' fields. At Zhanazhol', a small gas recovery plant went into operation in late 1984 in conjunction with a separation plant with a processing capacity of 1 million tons of oil per year. A much larger enterprise to refine oil and process associated gas is under construction at the Tengiz field. This enterprise is different from the major petrochemical operation planned to use feedstocks from Tengiz; the petrochemical operation will be constructed at Kulsary, 120 kilometers from Tengiz, and produce polyethylene, polypropylene, and other plastics.

  17. Fixed solar energy concentrator

    SciTech Connect

    Houghton, A.J.; Knasel, T.M.

    1981-01-20

    An apparatus for the concentration of solar energy upon a fixed array of solar cells is disclosed. A transparent material is overlayed upon the cell array, and a diffuse reflective coating is applied to the surface area of the transparent medium in between cells. Radiant light, which reflects through the transparent layer and does not fall directly incident to a cell surface is reflected by the coating layer in an approximate cosine pattern. Thereafter, such light undergoes internal reflection and rediffusion until subsequently it either strikes a solar cell surface or is lost through the upper surface of the transparent material.

  18. Downregulation of renal tubular Wnt/β-catenin signaling by Dickkopf-3 induces tubular cell death in proteinuric nephropathy

    PubMed Central

    Wong, D W L; Yiu, W H; Wu, H J; Li, R X; Liu, Y; Chan, K W; Leung, J C K; Chan, L Y Y; Lai, K N; Tang, S C W

    2016-01-01

    Studies on the role of Wnt/β-catenin signaling in different forms of kidney disease have yielded discrepant results. Here, we report the biphasic change of renal β-catenin expression in mice with overload proteinuria in which β-catenin was upregulated at the early stage (4 weeks after disease induction) but abrogated at the late phase (8 weeks). Acute albuminuria was observed at 1 week after bovine serum albumin injection, followed by partial remission at 4 weeks that coincided with overexpression of renal tubular β-catenin. Interestingly, a rebound in albuminuria at 8 weeks was accompanied by downregulated tubular β-catenin expression and heightened tubular apoptosis. In addition, there was an inverse relationship between Dickkopf-3 (Dkk-3) and renal tubular β-catenin expression at these time points. In vitro, a similar trend in β-catenin expression was observed in human kidney-2 (HK-2) cells with acute (upregulation) and prolonged (downregulation) exposure to albumin. Induction of a proapoptotic phenotype by albumin was significantly enhanced by silencing β-catenin in HK-2 cells. Finally, Dkk-3 expression and secretion was increased after prolonged exposure to albumin, leading to the suppression of intracellular β-catenin signaling pathway. The effect of Dkk-3 on β-catenin signaling was confirmed by incubation with exogenous Dkk-3 in HK-2 cells. Taken together, these data suggest that downregulation of tubular β-catenin signaling induced by Dkk-3 has a detrimental role in chronic proteinuria, partially through the increase in apoptosis. PMID:27010856

  19. Minimally invasive removal of thoracic and lumbar spinal tumors using a nonexpandable tubular retractor.

    PubMed

    Nzokou, Andre; Weil, Alexander G; Shedid, Daniel

    2013-12-01

    Resection of spinal tumors traditionally requires bilateral subperiosteal muscle stripping, extensive laminectomy, and, in cases of foraminal extension, partial or radical facetectomy. Fusion is often warranted in cases of facetectomy to prevent deformity, pain, and neurological deterioration. Recent reports have demonstrated safety and efficacy of mini-open removal of these tumors using expandable tubular retractors. The authors report their experience with the minimally invasive removal of extradural foraminal and intradural-extramedullary tumors using the nonexpandable tubular retractor. A retrospective chart review of consecutive patients who underwent minimally invasive resection of spinal tumors at Notre Dame Hospital was performed. Between December 2005 and March 2012, 13 patients underwent minimally invasive removal of spinal tumors at Notre Dame Hospital, Montreal. There were 6 men and 7 women with a mean age of 55 years (range 20-80 years). There were 2 lumbar and 2 thoracic intradural-extramedullary tumors and 7 thoracic and 2 lumbar extradural foraminal tumors. Gross-total resection was achieved in 12 patients. Subtotal resection (90%) was attained in 1 patient because the tumor capsule was adherent to the diaphragm. The average duration of surgery was 189 minutes (range 75-540 minutes), and the average blood loss was 219 ml (range 25-500 ml). There were no major procedure-related complications. Pathological analysis revealed benign schwannoma in 8 patients and meningioma, metastasis, plasmacytoma, osteoid osteoma, and hemangiopericytoma in 1 patient each. The average equivalent dose of postoperative narcotics after surgery was 66.3 mg of morphine. The average length of hospitalization was 66 hours (range 24-144 hours). All working patients returned to normal activities within 4 weeks. The average MRI and clinical follow-up were 13 and 21 months, respectively (range 2-68 months). At last follow-up, 92% of patients had improvement or resolution of pain

  20. Tenofovir is associated with increased tubular proteinuria and asymptomatic renal tubular dysfunction in Ghana.

    PubMed

    Chadwick, David R; Sarfo, Fred S; Kirk, Elaine S M; Owusu, Dorcas; Bedu-Addo, George; Parris, Victoria; Owusu, Ann Lorraine; Phillips, Richard

    2015-12-01

    HIV infection is associated with increased risk of renal dysfunction, including tubular dysfunction (TD) related to antiretroviral therapy (ART). Tenofovir disoproxil fumarate (TDF) is becoming available for ART in sub-Saharan Africa, although data on its long-term safety there is limited. We aimed to study the prevalence of HIV-associated renal dysfunction in Ghana and explore associations between proteinuria or TD and potential risk factors, including TDF use. A single-centre cross-sectional observational study of patients taking ART was undertaken. Creatinine clearance (CrCl) was calculated and proteinuria detected with dipsticks. Spot urinary albumin and protein:creatinine ratios (uACR/uPCR) were measured and further evidence of TD (defined as having two or more characteristic features) sought. Logistic regression analysis identified factors associated with proteinuria or TD. In 330 patients, of whom 101 were taking TDF (median 20 months), the prevalence of CrCl < 60 ml/min/1.73 m(2), dipstick proteinuria and TD was 7 %, 37 % and 15 %. Factors associated with proteinuria were baseline CD4-count [aOR 0.86/100 cell increment (95 % CI, 0.74-0.99)] and TDF use [aOR 2.74 (95 % CI, 1.38-5.43)]. The only factor associated with TD was TDF use [aOR 3.43 (95 % CI, 1.10-10.69)]. In a subset with uPCR measurements, uPCRs were significantly higher in patients taking TDF than those on other drugs (10.8 vs. 5.7 mg/mmol, p < 0.001), and urinary albuin:protein ratios significantly lower (0.24 vs. 0.58, p < 0.001). Both proteinuria and TD are common and associated with TDF use in Ghana. Further longitudinal studies to determine whether proteinuria, TD or TDF use are linked to progressive decline in renal function or other adverse outcomes are needed in Africa.

  1. Fixed Sagittal Plane Imbalance

    PubMed Central

    Savage, Jason W.; Patel, Alpesh A.

    2014-01-01

    Study Design Literature review. Objective To discuss the evaluation and management of fixed sagittal plane imbalance. Methods A comprehensive literature review was performed on the preoperative evaluation of patients with sagittal plane malalignment, as well as the surgical strategies to address sagittal plane deformity. Results Sagittal plane imbalance is often caused by de novo scoliosis or iatrogenic flat back deformity. Understanding the etiology and magnitude of sagittal malalignment is crucial in realignment planning. Objective parameters have been developed to guide surgeons in determining how much correction is needed to achieve favorable outcomes. Currently, the goals of surgery are to restore a sagittal vertical axis < 5 cm, pelvic tilt < 20 degrees, and lumbar lordosis equal to pelvic incidence ± 9 degrees. Conclusion Sagittal plane malalignment is an increasingly recognized cause of pain and disability. Treatment of sagittal plane imbalance varies according to the etiology, location, and severity of the deformity. Fixed sagittal malalignment often requires complex reconstructive procedures that include osteotomy correction. Reestablishing harmonious spinopelvic alignment is associated with significant improvement in health-related quality-of-life outcome measures and patient satisfaction. PMID:25396111

  2. Fixed sagittal plane imbalance.

    PubMed

    Savage, Jason W; Patel, Alpesh A

    2014-12-01

    Study Design Literature review. Objective To discuss the evaluation and management of fixed sagittal plane imbalance. Methods A comprehensive literature review was performed on the preoperative evaluation of patients with sagittal plane malalignment, as well as the surgical strategies to address sagittal plane deformity. Results Sagittal plane imbalance is often caused by de novo scoliosis or iatrogenic flat back deformity. Understanding the etiology and magnitude of sagittal malalignment is crucial in realignment planning. Objective parameters have been developed to guide surgeons in determining how much correction is needed to achieve favorable outcomes. Currently, the goals of surgery are to restore a sagittal vertical axis < 5 cm, pelvic tilt < 20 degrees, and lumbar lordosis equal to pelvic incidence ± 9 degrees. Conclusion Sagittal plane malalignment is an increasingly recognized cause of pain and disability. Treatment of sagittal plane imbalance varies according to the etiology, location, and severity of the deformity. Fixed sagittal malalignment often requires complex reconstructive procedures that include osteotomy correction. Reestablishing harmonious spinopelvic alignment is associated with significant improvement in health-related quality-of-life outcome measures and patient satisfaction.

  3. Expanding contraceptive options.

    PubMed

    1989-01-01

    The goals of Family Health International (FHI) have been to introduce a variety of birth control options to people in developing countries, and to provide information to the user on the advantages and disadvantages of each method. FHI has worked with many developing countries in clinical trials of established as well as new contraceptive methods. These trials played an important part in making 2 sterilization procedures, laparoscopy and minilaparotomy popular for women. Further research improved the methods and have made them the most popular in the world, chosen by 130 million users. FHI is doing clinical trials on a new IUD, that is a copper bearing T-shaped device called the TCu380A. they have collected data on over 10,000 women using IUD's and early analysis indicates TCu380A is more effective than others. FHI is also evaluating devices such as Norplant that will prevent pregnancy up to 5 years by implanting the capsules in the arm. More than 8,000 women are being tested to determine the acceptability of implants in different geographical locations. Other research groups are doing work in 10 additional countries: Bangladesh will expand its program to 24,000 women and Nepal to 8,000 women. Trials are also being conducted on progestogen pills, since they do not lesson the volume of milk in breast feeding. FHI has also worked to introduce creative community-based distribution channels. In one case, specially trained health workers delivered contraceptives door-to-door in over 150,000 households. They found that 2 of 3 women accepted the pills and in a follow up survey 90% were still using them. FHI is now focusing on ways to improve moving new contraceptives from clinical testing on everyday use. They will coordinate training programs, educational material, media campaigns, and efforts with other international organizations, government agencies, and family planning groups.

  4. The Artful Universe Expanded

    NASA Astrophysics Data System (ADS)

    Barrow, John D.

    2005-07-01

    Our love of art, writes John Barrow, is the end product of millions of years of evolution. How we react to a beautiful painting or symphony draws upon instincts laid down long before humans existed. Now, in this enhanced edition of the highly popular The Artful Universe , Barrow further explores the close ties between our aesthetic appreciation and the basic nature of the Universe. Barrow argues that the laws of the Universe have imprinted themselves upon our thoughts and actions in subtle and unexpected ways. Why do we like certain types of art or music? What games and puzzles do we find challenging? Why do so many myths and legends have common elements? In this eclectic and entertaining survey, Barrow answers these questions and more as he explains how the landscape of the Universe has influenced the development of philosophy and mythology, and how millions of years of evolutionary history have fashioned our attraction to certain patterns of sound and color. Barrow casts the story of human creativity and thought in a fascinating light, considering such diverse topics as our instinct for language, the origins and uses of color in nature, why we divide time into intervals as we do, the sources of our appreciation of landscape painting, and whether computer-generated fractal art is really art. Drawing on a wide variety of examples, from the theological questions raised by St. Augustine and C.S. Lewis to the relationship between the pure math of Pythagoras and the music of the Beatles, The Artful Universe Expanded covers new ground and enters a wide-ranging debate about the meaning and significance of the links between art and science.

  5. Advanced expander test bed program

    NASA Technical Reports Server (NTRS)

    Masters, A. I.; Mitchell, J. C.

    1991-01-01

    The Advanced Expander Test Bed (AETB) is a key element in NASA's Chemical Transfer Propulsion Program for development and demonstration of expander cycle oxygen/hydrogen engine technology component technology for the next space engine. The AETB will be used to validate the high-pressure expander cycle concept, investigate system interactions, and conduct investigations of advanced missions focused components and new health monitoring techniques. The split-expander cycle AETB will operate at combustion chamber pressures up to 1200 psia with propellant flow rates equivalent to 20,000 lbf vacuum thrust.

  6. Advanced expander test bed engine

    NASA Technical Reports Server (NTRS)

    Mitchell, J. P.

    1992-01-01

    The Advanced Expander Test Bed (AETB) is a key element in NASA's Space Chemical Engine Technology Program for development and demonstration of expander cycle oxygen/hydrogen engine and advanced component technologies applicable to space engines as well as launch vehicle upper stage engines. The AETB will be used to validate the high pressure expander cycle concept, study system interactions, and conduct studies of advanced mission focused components and new health monitoring techniques in an engine system environment. The split expander cycle AETB will operate at combustion chamber pressures up to 1200 psia with propellant flow rates equivalent to 20,000 lbf vacuum thrust.

  7. Kinetics of carbendazim degradation in a horizontal tubular biofilm reactor.

    PubMed

    Alvarado-Gutiérrez, María Luisa; Ruiz-Ordaz, Nora; Galíndez-Mayer, Juvencio; Santoyo-Tepole, Fortunata; Curiel-Quesada, Everardo; García-Mena, Jaime; Ahuatzi-Chacón, Deifilia

    2016-12-22

    The fungicide carbendazim is an ecotoxic agent affecting aquatic biota. Due to its suspected hormone-disrupting effects, it is considered a "priority hazard substance" by the Water Framework Directive of the European Commission, and its degradation is of major concern. In this work, a horizontal tubular biofilm reactor (HTBR) operating in plug-flow regime was used to study the kinetics of carbendazim removal by an acclimated microbial consortium. The reactor was operated in steady state continuous culture at eight different carbendazim loading rates. The concentrations of the fungicide were determined at several distances of the HTBR. At the loading rates tested, the highest instantaneous removal rates were observed in the first section of the tubular biofilm reactor. No evidence of inhibition of the catabolic activity of the microbial community was found. Strains of the genera Flectobacillus, Klebsiella, Stenotrophomonas, and Flavobacterium were identified in the biofilm; the last three degrade carbendazim in axenic culture.

  8. A new tubular hot-wire CVD for diamond coating

    NASA Astrophysics Data System (ADS)

    Motahari, Hamid; Bellah, Samad Moemen; Malekfar, Rasoul

    2017-06-01

    A new tubular hot-wire chemical vapor deposition (HWCVD) system using a tubular quartz vacuum chamber has been fabricated. The filaments in this system can heat the substrate and act as a gas activator and thermally activator for gas species at the same time. The nano- and microcrystalline diamond coatings on the surface of steel AISI 316 substrates have been grown. To assess the results, SEM and FESEM images and Raman spectroscopy investigations have been applied. The results reveal that micro- and nanocrystalline diamond structures have been formed in the coatings, but the disordered diamond and some non-diamond phases, such as graphitic carbons, are also present in the coating layers. The analytical measurements show the growth of diamond films with well-faceted crystals in (111) direction. However, intrinsic stress, secondary nucleation, and poor adhesion are the main issues of future research for this new designed HWCVD.

  9. An early Cambrian agglutinated tubular lophophorate with brachiopod characters

    NASA Astrophysics Data System (ADS)

    Zhang, Z.-F.; Li, G.-X.; Holmer, L. E.; Brock, G. A.; Balthasar, U.; Skovsted, C. B.; Fu, D.-J.; Zhang, X.-L.; Wang, H.-Z.; Butler, A.; Zhang, Z.-L.; Cao, C.-Q.; Han, J.; Liu, J.-N.; Shu, D.-G.

    2014-05-01

    The morphological disparity of lophotrochozoan phyla makes it difficult to predict the morphology of the last common ancestor. Only fossils of stem groups can help discover the morphological transitions that occurred along the roots of these phyla. Here, we describe a tubular fossil Yuganotheca elegans gen. et sp. nov. from the Cambrian (Stage 3) Chengjiang Lagerstätte (Yunnan, China) that exhibits an unusual combination of phoronid, brachiopod and tommotiid (Cambrian problematica) characters, notably a pair of agglutinated valves, enclosing a horseshoe-shaped lophophore, supported by a lower bipartite tubular attachment structure with a long pedicle with coelomic space. The terminal bulb of the pedicle provided anchorage in soft sediment. The discovery has important implications for the early evolution of lophotrochozoans, suggesting rooting of brachiopods into the sessile lophotrochozoans and the origination of their bivalved bauplan preceding the biomineralization of shell valves in crown brachiopods.

  10. Phyllotactic transformations as plastic deformations of tubular crystals with defects

    NASA Astrophysics Data System (ADS)

    Beller, Daniel; Nelson, David

    Tubular crystals are 2D lattices in cylindrical topologies, which could be realized as assemblies of colloidal particles, and occur naturally in biological microtubules and in single-walled carbon nanotubes. Their geometry can be understood in the language of phyllotaxis borrowed from botany. We study the mechanics of plastic deformations in tubular crystals in response to tensile stress, as mediated by the formation and separation of dislocation pairs in a triangular lattice. Dislocation motion allows the growth of one phyllotactic arrangement at the expense of another, offering a low-energy, stepwise mode of plastic deformation in response to external stresses. Through theory and simulation, we examine how the tube's radius and helicity affects, and is in turn altered by, dislocation glide. The crystal's bending modulus is found to produce simple but important corrections to the tube's deformation mechanics.

  11. Testing composite-to-metal tubular lap joints

    SciTech Connect

    Guess, T.R.; Reedy, E.D. Jr.; Slavin, A.M.

    1993-11-01

    Procedures were developed to fabricate, nondestructively evaluate, and mechanically test composite-to-metal tubular joints. The axially loaded tubular lap joint specimen consisted of two metal tubes bonded within each end of a fiberglass composite tube. Joint specimens with both tapered and untapered aluminum adherends and a plain weave E-glass/epoxy composite were tested in tension, compression, and flexure. Other specimens with tapered and untapered steel adherends and a triaxially reinforced E-glass/epoxy composite were tested in tension and compression. Test results include joint strength and failure mode data. A finite element analysis of the axially loaded joints explains the effect of adherend geometry and material properties on measured joint strength. The flexural specimen was also analyzed; calculated surface strains are in good agreement with measured values, and joint failure occurs in the region of calculated peak peel stress.

  12. Numerical simulation of premixed H2-air cellular tubular flames

    NASA Astrophysics Data System (ADS)

    Hall, Carl Alan; Wendell Pitz, Robert

    2016-03-01

    The detailed flame structure of laminar premixed cellular flames in the tubular domain is simulated in 2D using a fully-implicit primitive variable finite difference formulation that includes multicomponent transport and detailed chemical kinetics. Numerical results for H2/air flames are presented and compared against spatially resolved experimental measurements of temperature and chemical species including atomic H and OH. The experimental results compare well for flame structure and cell number, despite the numerical model under-predicting the peak temperature by 200 K. Numerical experiments were performed to assess the ability for cellular tubular flames to impact experimental and numerical investigations of practical flames. The cellular flame structure is found to provide a highly sensitive geometry that is useful for validating diffusive transport modelling approximations. This capability is exemplified through the development of a simple and accurate approximation for thermal diffusion (i.e. the Soret effect) that is suitable for practical combustion codes.

  13. Hypophosphatemic rickets due to perturbations in renal tubular function.

    PubMed

    Penido, Maria Goretti M G; Alon, Uri S

    2014-03-01

    The common denominator for all types of rickets is hypophosphatemia, leading to inadequate supply of the mineral to the growing bone. Hypophosphatemia can result from insufficient uptake of the mineral from the gut or its disproportionate losses in the kidney, the latter being caused by either tubular abnormalities per se or the effect on the tubule of circulating factors like fibroblast growth factor-23 and parathyroid hormone (PTH). High serum levels of the latter result in most cases from abnormalities in vitamin D metabolism which lead to decreased calcium absorption in the gut and hypocalcemia, triggering PTH secretion. Rickets is a disorder of the growth plate and hence pediatric by definition. However, it is important to recognize that the effect of hypophosphatemia on other parts of the skeleton results in osteomalacia in both children and adults. This review addresses the etiology, pathophysiologic mechanisms, clinical manifestations and treatment of entities associated with hypophosphatemic rickets due to perturbations in renal tubular function.

  14. An early Cambrian agglutinated tubular lophophorate with brachiopod characters

    PubMed Central

    Zhang, Z.-F.; Li, G.-X.; Holmer, L. E.; Brock, G. A.; Balthasar, U.; Skovsted, C. B.; Fu, D.-J.; Zhang, X.-L.; Wang, H.-Z.; Butler, A.; Zhang, Z.-L.; Cao, C.-Q.; Han, J.; Liu, J.-N.; Shu, D.-G.

    2014-01-01

    The morphological disparity of lophotrochozoan phyla makes it difficult to predict the morphology of the last common ancestor. Only fossils of stem groups can help discover the morphological transitions that occurred along the roots of these phyla. Here, we describe a tubular fossil Yuganotheca elegans gen. et sp. nov. from the Cambrian (Stage 3) Chengjiang Lagerstätte (Yunnan, China) that exhibits an unusual combination of phoronid, brachiopod and tommotiid (Cambrian problematica) characters, notably a pair of agglutinated valves, enclosing a horseshoe-shaped lophophore, supported by a lower bipartite tubular attachment structure with a long pedicle with coelomic space. The terminal bulb of the pedicle provided anchorage in soft sediment. The discovery has important implications for the early evolution of lophotrochozoans, suggesting rooting of brachiopods into the sessile lophotrochozoans and the origination of their bivalved bauplan preceding the biomineralization of shell valves in crown brachiopods. PMID:24828016

  15. Evacuated, displacement compression mold. [of tubular bodies from thermosetting plastics

    NASA Technical Reports Server (NTRS)

    Heier, W. C. (Inventor)

    1974-01-01

    A process of molding long thin-wall tubular bodies from thermosetting plastic molding compounds is described wherein the tubular body lengths may be several times the diameters. The process is accomplished by loading a predetermined quantity of molding compound into a female mold cavity closed at one end by a force mandrel. After closing the other end of the female mold with a balance mandrel, the loaded cavity is evacuated by applying a vacuum of from one-to-five mm pressure for a period of fifteen-to-thirty minutes. The mold temperature is raised to the minimum temperature at which the resin constituent of the compound will soften or plasticize and a pressure of 2500 psi is applied.

  16. Buckling characteristics of hypersonic aircraft wing tubular panels

    NASA Technical Reports Server (NTRS)

    Ko, William L.; Shideler, John L.; Fields, Roger A.

    1986-01-01

    The buckling characteristics of Rene 41 tubular panels installed as wing panels on a hypersonic wing test structure (HWTS) were determined nondestructively through use of a force/stiffness technique. The nondestructive buckling tests were carried out under different combined load conditions and different temperature environments. Two panels were subsequently tested to buckling failure in a universal tension compression testing machine. In spite of some data scattering because of large extrapolations of data points resulting from termination of the test at a somewhat low applied load, the overall test data correlated fairly well with theoretically predicted buckling interaction curves. The structural efficiency of the tubular panels was slightly higher than that of the beaded panels which they replaced.

  17. Apparatus for fixing latency

    DOEpatents

    Hall, David R [Provo, UT; Bartholomew, David B [Springville, UT; Moon, Justin [Bountiful, UT; Koehler, Roger O [Provo, UT

    2009-09-08

    An apparatus for fixing computational latency within a deterministic region on a network comprises a network interface modem, a high priority module and at least one deterministic peripheral device. The network interface modem is in communication with the network. The high priority module is in communication with the network interface modem. The at least one deterministic peripheral device is connected to the high priority module. The high priority module comprises a packet assembler/disassembler, and hardware for performing at least one operation. Also disclosed is an apparatus for executing at least one instruction on a downhole device within a deterministic region, the apparatus comprising a control device, a downhole network, and a downhole device. The control device is near the surface of a downhole tool string. The downhole network is integrated into the tool string. The downhole device is in communication with the downhole network.

  18. Mechanical models for the self-organization of tubular patterns.

    PubMed

    Guo, Chin-Lin

    2013-01-01

    Organogenesis, such as long tubule self-organization, requires long-range coordination of cell mechanics to arrange cell positions and to remodel the extracellular matrix. While the current mainstream in the field of tissue morphogenesis focuses primarily on genetics and chemical signaling, the influence of cell mechanics on the programming of patterning cues in tissue morphogenesis has not been adequately addressed. Here, we review experimental evidence and propose quantitative mechanical models by which cells can create tubular patterns.

  19. The hybrid ring tubular external fixator: a biomechanical study.

    PubMed

    Stein, H; Mosheiff, R; Baumgart, F; Frigg, R; Perren, S M; Cordey, J

    1997-06-01

    OBJECTIVE: To measure and compare the mechanical properties in bending of the four-ring, and three-ring/one-tube hybrid external fixation frames. DESIGN. IN VITRO: measurements of the mechanical behaviour of ring and ring-tubular external fixation frames. In the latter, one ring of the full circular frame was replaced by one tube and Schanz screws. BACKGROUND: The mechanical properties of the classical Ilizarov four-ring external fixation frames has been compared to those of other external fixation frames by various authors. However, in clinical practice the hybrid fixation frame is being used with increasing frequency. Therefore the mechanical properties of the latter are of immediate interest and clinical value. METHODS: On explanted sheep tibiae with single and double osteotomies, frame stiffness in the four-point bending mode was measured at different K-wire tensions, comparing the values obtained from four-ring frames, to those of three-ring-tubular hybrid frames. These measurements were made under conditions of (a) bone distraction (BD), and (b) segment transport (ST), both at the initial and final stages of this procedure. RESULTS: In circular frames, frame stiffness in bending for increasing K-wire tension showed a Gaussian distribution both in distraction and post-ST with an optimum at 1000 N. In ring tubular hybrid frames, however, frame stiffness showed a more linear relationship to K-wire tension. CONCLUSIONS: In the four-ring Ilizarov external fixation frame, the exchange of one ring with one tube and one Schanz screw both reduced frame stiffness in bending and converted to linear its relationship to K-wire tension. RELEVANCE: Under clinical conditions, the use of a similar ring tubular hybrid external fixator allows the adjustment of frame stiffness in a simple and practical way. This is not the case with the original ring fixation frame.

  20. Tubular space truss structure for SKITTER 2 robot

    NASA Technical Reports Server (NTRS)

    Beecham, Richard; Dejulio, Linda; Delorme, Paul; Eck, Eric; Levy, Avi; Lowery, Joel; Radack, Joe; Sheffield, Randy; Stevens, Scott

    1988-01-01

    The Skitter 2 is a three legged transport vehicle designed to demonstrate the principle of a tripod walker in a multitude of environments. The tubular truss model of Skitter 2 is a proof of principal design. The model will replicate the operational capabilities of Skitter 2 including its ability to self-right itself. The project's focus was on the use of light weight tubular members in the final structural design. A strong design for the body was required as it will undergo the most intense loading. Triangular geometry was used extensively in the body, providing the required structural integrity and eliminating the need for cumbersome shear panels. Both the basic femur and tibia designs also relied on the strong geometry of the triangle. An intense literature search aided in the development of the most suitable weld techniques, joints, linkages, and materials required for a durable design. The hinge design features the use of spherical rod end bearings. In order to obtain a greater range of mobility in the tibia, a four-bar linkage was designed which attaches both to the femur and the tibia. All component designs, specifically the body, femur, and the tibia were optimized using the software package IDEAS 3.8A Supertab. The package provided essential deformation and stress analysis information on each component's design. The final structure incurred only a 0.0544 inch deflection in a maximum (worst case) loading situation. The highest stress experienced by any AL6061-T6 tubular member was 1920 psi. The structural integrity of the final design facilitated the use of Aluminum 6061-T6 tubing. The tubular truss structure of Skitter 2 is an effective and highly durable design. All facets of the design are structurally sound and cost effective.

  1. Elastomer liners for geothermal tubulars Y267 EPDM Liner Program:

    SciTech Connect

    Hirasuna, A.R.; Davis, D.L.; Flickinger, J.E.; Stephens, C.A.

    1987-12-01

    The elastomer, Y267 EPDM, has been identified as a hydrothermally stable material which can operate at temperatures in excess of 320/sup 0/C. The goal of the Y267 Liner Program was to demonstrate the feasibility of using this material as a liner for mild steel tubulars to prevent or mitigate corrosion. If successful, the usage of EPDM lined pipe by the geothermal community may have a significant impact on operating costs and serve as a viable alternative to the use of alloyed tubulars. Tooling procedures were developed under this program to mold a 0.64 cm (0.25'') thick Y267 EPDM liner into a tubular test section 61 cm (2') in length and 19.1 cm (7.5'') in diameter (ID). A successful effort was made to identify a potential coupling agent to be used to bond the elastomer to the steel tubular wall. This agent was found to withstand the processing conditions associated with curing the elastomer at 288/sup 0/C and to retain a significant level of adhesive strength following hydrothermal testing in a synthetic brine at 260/sup 0/C for a period of 166 hours. Bonding tests were conducted on specimens of mild carbon steel and several alloys including Hastelloy C-276. An objective of the program was to field test the lined section of pipe mentioned above at a geothermal facility in the Imperial Valley. Though a test was conducted, problems encountered during the lining operation precluded an encouraging outcome. The results of the field demonstration were inconclusive. 6 refs., 13 figs., 13 tabs

  2. Angiotensin II induces apoptosis in renal proximal tubular cells.

    PubMed

    Bhaskaran, Madhu; Reddy, Krishna; Radhakrishanan, Neetu; Franki, Nicholas; Ding, Guohua; Singhal, Pravin C

    2003-05-01

    ANG II has been demonstrated to play a role in the progression of tubulointerstial injury. We studied the direct effect of ANG II on apoptosis of cultured rat renal proximal tubular epithelial cells (RPTECs). ANG II promoted RPTEC apoptosis in a dose- and time-dependent manner. This effect of ANG II was attenuated by anti-transforming growth factor (TGF)-beta antibody. Moreover, TGF-beta triggered RPTEC apoptosis in a dose-dependent manner. ANG II also enhanced RPTEC expression of Fas and Fas ligand (FasL); furthermore, anti-FasL antibody attenuated ANG II-induced RPTEC apoptosis. In addition, ANG II increased RPTEC expression of Bax, a cell death protein. Both ANG II type 1 (AT(1)) and type 2 (AT(2)) receptor blockers inhibited ANG II-induced RPTEC apoptosis. SB-202190, an inhibitor of p38 MAPK phosphorylation, and caspase-3 inhibitor also attenuated ANG II-induced RPTEC apoptosis. ANG II enhanced RPTEC heme oxygenase (HO)-1 expression. Interestingly, pretreatment with hemin as well as curcumin (inducers of HO-1) inhibited the ANG II-induced tubular cell apoptosis; conversely, pretreatment with zinc protoporphyrin, an inhibitor of HO-1 expression, promoted the effect of ANG II. These results suggest that ANG II-induced apoptosis is mediated via both AT(1) and AT(2) receptors through the generation of TGF-beta, followed by the transcription of cell death genes such as Fas, FasL, and Bax. Modulation of tubular cell expression of HO-1 has an inverse relationship with the ANG II-induced tubular cell apoptosis.

  3. Tissue cell assisted fabrication of tubular catalytic platinum microengines

    NASA Astrophysics Data System (ADS)

    Wang, Hong; Moo, James Guo Sheng; Pumera, Martin

    2014-09-01

    We report a facile platform for mass production of robust self-propelled tubular microengines. Tissue cells extracted from fruits of banana and apple, Musa acuminata and Malus domestica, are used as the support on which a thin platinum film is deposited by means of physical vapor deposition. Upon sonication of the cells/Pt-coated substrate in water, microscrolls of highly uniform sizes are spontaneously formed. Tubular microengines fabricated with the fruit cell assisted method exhibit a fast motion of ~100 bodylengths per s (~1 mm s-1). An extremely simple and affordable platform for mass production of the micromotors is crucial for the envisioned swarms of thousands and millions of autonomous micromotors performing biomedical and environmental remediation tasks.We report a facile platform for mass production of robust self-propelled tubular microengines. Tissue cells extracted from fruits of banana and apple, Musa acuminata and Malus domestica, are used as the support on which a thin platinum film is deposited by means of physical vapor deposition. Upon sonication of the cells/Pt-coated substrate in water, microscrolls of highly uniform sizes are spontaneously formed. Tubular microengines fabricated with the fruit cell assisted method exhibit a fast motion of ~100 bodylengths per s (~1 mm s-1). An extremely simple and affordable platform for mass production of the micromotors is crucial for the envisioned swarms of thousands and millions of autonomous micromotors performing biomedical and environmental remediation tasks. Electronic supplementary information (ESI) available: Related video. See DOI: 10.1039/c4nr03720k

  4. Solar energy utilisation and evacuated tubular solar collectors

    NASA Astrophysics Data System (ADS)

    Parand, Foroutan

    Four types of evacuated tubular solar collectors have been constructed and their performance evaluated. The characteristics of the collectors are then compared and their design strengths assessed. One of the designs, a flat absorber with a single glass cover using glass to metal seals was found to have the best performance among the four designs which included a dewar vessel type collector, a heat pipe collector and a black liquid collector with an optical efficiency of 87.7 pct. and an overall heat loss coefficient of 12.3 Wm(exp -2)/C. The performance of the dewar vessel type and black liquid collectors was found to be comparable to the glass to metal seal collector. A detailed analysis of the optical and thermal processes in evacuated tubular collectors was made. On the basis of this analysis a computer simulation model using a finite difference technique has been developed to predict the performance of evacuated tubular collectors. The computer simulation results are then compared with the test results. For the majority of the tests the discrepancy between the simulation and the test results was within the error band of the test results (maximum 12 pct.). For the published test results the maximum discrepancy for operating temperature below 100 C was found to be 6 pct. The computer simulation model was compared with other published models and its advantages and disadvantages discussed. In some analytical and semi-analytical simulation models the energy absorbed by the glass cover and the heat loss from joints and supports has to be ignored. The present model has none of these deficiencies and more complex designs can be simulated. The developed computer simulation program might be used as an aid in the design of evacuated tubular collectors. Using the computer simulation, a parametric study of the three commmercially available collectors was made. The results are discussed and the areas of improvement are identified.

  5. Fixed Access Network Sharing

    NASA Astrophysics Data System (ADS)

    Cornaglia, Bruno; Young, Gavin; Marchetta, Antonio

    2015-12-01

    Fixed broadband network deployments are moving inexorably to the use of Next Generation Access (NGA) technologies and architectures. These NGA deployments involve building fiber infrastructure increasingly closer to the customer in order to increase the proportion of fiber on the customer's access connection (Fibre-To-The-Home/Building/Door/Cabinet… i.e. FTTx). This increases the speed of services that can be sold and will be increasingly required to meet the demands of new generations of video services as we evolve from HDTV to "Ultra-HD TV" with 4k and 8k lines of video resolution. However, building fiber access networks is a costly endeavor. It requires significant capital in order to cover any significant geographic coverage. Hence many companies are forming partnerships and joint-ventures in order to share the NGA network construction costs. One form of such a partnership involves two companies agreeing to each build to cover a certain geographic area and then "cross-selling" NGA products to each other in order to access customers within their partner's footprint (NGA coverage area). This is tantamount to a bi-lateral wholesale partnership. The concept of Fixed Access Network Sharing (FANS) is to address the possibility of sharing infrastructure with a high degree of flexibility for all network operators involved. By providing greater configuration control over the NGA network infrastructure, the service provider has a greater ability to define the network and hence to define their product capabilities at the active layer. This gives the service provider partners greater product development autonomy plus the ability to differentiate from each other at the active network layer.

  6. Vascular versus tubular renin: role in kidney development

    PubMed Central

    Nagalakshmi, Vidya K.; Li, Minghong; Sigmund, Curt D.; Gomez, R. Ariel

    2015-01-01

    Renin, the key regulated enzyme of the renin-angiotensin system regulates blood pressure, fluid-electrolyte homeostasis, and renal morphogenesis. Whole body deletion of the renin gene results in severe morphological and functional derangements, including thickening of renal arterioles, hydronephrosis, and inability to concentrate the urine. Because renin is found in vascular and tubular cells, it has been impossible to discern the relative contribution of tubular versus vascular renin to such a complex phenotype. Therefore, we deleted renin independently in the vascular and tubular compartments by crossing Ren1c fl/fl mice to Foxd1-cre and Hoxb7-cre mice, respectively. Deletion of renin in the vasculature resulted in neonatal mortality that could be rescued with daily injections of saline. The kidneys of surviving mice showed the absence of renin, hypertrophic arteries, hydronephrosis, and negligible levels of plasma renin. In contrast, lack of renin in the collecting ducts did not affect kidney morphology, intra-renal renin, or circulating renin in basal conditions or in response to a homeostatic stress, such as sodium depletion. We conclude that renin generated in the renal vasculature is fundamental for the development and integrity of the kidney, whereas renin in the collecting ducts is dispensable for normal kidney development and cannot compensate for the lack of renin in the vascular compartment. Further, the main source of circulating renin is the kidney vasculature. PMID:26246508

  7. Developmental changes in renal tubular transport-an overview.

    PubMed

    Gattineni, Jyothsna; Baum, Michel

    2015-12-01

    The adult kidney maintains a constant volume and composition of extracellular fluid despite changes in water and salt intake. The neonate is born with a kidney that has a small fraction of the glomerular filtration rate of the adult and immature tubules that function at a lower capacity than that of the mature animal. Nonetheless, the neonate is also able to maintain a constant extracellular fluid volume and composition. Postnatal renal tubular development was once thought to be due to an increase in the transporter abundance to meet the developmental increase in glomerular filtration rate. However, postnatal renal development of each nephron segment is quite complex. There are isoform changes of several transporters as well as developmental changes in signal transduction that affect the capacity of renal tubules to reabsorb solutes and water. This review will discuss neonatal tubular function with an emphasis on the differences that have been found between the neonate and adult. We will also discuss some of the factors that are responsible for the maturational changes in tubular transport that occur during postnatal renal development.

  8. Hierarchically designed electrospun tubular scaffolds for cardiovascular applications.

    PubMed

    Shalumon, K T; Sreerekha, P R; Sathish, D; Tamura, H; Nair, S V; Chennazhi, K P; Jayakumar, R

    2011-10-01

    Hierarchically designed tubular scaffolds with bi-layer and multi-layer structures are expected to mimic native vessels in its structural geometry. A new approach for the fabrication of hierarchically designed tubular scaffold with suitable morphology was introduced through electrospinning technique. Among these scaffolds, bi-layer scaffold had a single inner and outer layer whereas multilayer scaffold had more number of inner layers. The inner layer/layers of the scaffolds were made up of aligned poly (lactic acid) (PLA) fibers for EC adhesion where as outer layers were composed of random fibers of poly (caprolactone) (PCL) and PLA providing larger pores for SMC penetration. The fabricated scaffolds were characterized by FTIR spectroscopy and Differential Thermal Analysis (DTA) and examined by evaluating cellular interactions. Human Umbilical Vein Endothelial Cells (HUVECs) seeded on aligned PLA fibers showed enhanced cellular orientation and cytoskeletal organization. In addition, the PCL-PLA composite random fibers supported SMC adhesion and proliferation sufficiently. The functionality of the endothelial cells grown on the PLA-aligned scaffold was also found to be satisfactory. Lining the constructs with a luminal monolayer of well-organized ECs along with homogenously distributed SMCs surrounding them might result in vascular conduits suitable for in vivo applications. Since this hierarchically designed tubular scaffold closely mimics the morphology of native vessel, this could be a better candidate for vascular tissue engineering.

  9. Gage for measuring fluted oil field tubular members

    SciTech Connect

    Case, W.A.; Burt, J.R.

    1987-03-17

    A gage is described for measuring the nominal diameter of an elongated tubular member having circumferentially spaced apart radially outwardly extending flutes and for calibrating the amount of wear to the flutes and predicting the future wear life of the tubular member. The gage comprises: a first gage part including a pair of spaced apart colinear elongated first handlebar halves with a generally semi-circular first half ring positioned between the first handlebar halves. The first half ring includes at least one flute engaging surface which includes stepped arcuate flute engaging portions positioned at radii from the center of the first ring half corresponding to different diameters to be measured; a second gage part including a pair of spaced apart colinear elongated second handlebar halves with a generally semicircular second half ring positioned between the second handlebar halves. The second half ring includes at least one flute engaging surface which includes stepped arcuate flute engaging portions positioned a radii from the center of the second ring half corresponding to different diameters to be measured. The number of flute engaging surfaces of the first and second ring halves is equal to the number of flutes on the tubular member; and a hinge pivotally connecting together one handlebar half of the first gage part to one handlebar half of the second gage part.

  10. Method and apparatus for forming flues on tubular stock

    DOEpatents

    Beck, D.E.; Carson, C.

    1979-12-21

    The present invention is directed to a die mechanism utilized for forming flues on long, relatively narrow tubular stock. These flues are formed by displacing a die from within the tubular stock through perforations previously drilled through the tubular stock at selected locations. The drawing of the die upsets the material to form the flue of the desired configuration. The die is provided with a lubricating system which enables the lubricant to be dispensed uniformly about the entire periphery of the die in contact with the material being upset so as to assure the formation of the flues. Further, the lubricant is dispensed from within the die onto the peripheral surface of the latter at pressures in the range of about 2000 to 10,000 psi so as to assure the adequate lubrication of the die during the drawing operation. By injecting the lubricant at such high pressures, low viscosity liquid, such as water and/or alcohol, may be efficiently used as a lubricant and also provides a mechanism by which the lubricant may be evaporated from the surface of the flues at ambient conditions so as to negate the cleansing operations previously required prior to joining the flues to other conduit mechanisms by fusion welding and the like.

  11. Helium permeation through a silicalite-1 tubular membrane

    NASA Astrophysics Data System (ADS)

    Hernández, M. G.; Salinas-Rodríguez, E.; Gómez, S. A.; Roa-Neri, J. A. E.; Alfaro, S.; Valdés-Parada, F. J.

    2015-06-01

    A silicalite-1 tubular membrane was prepared on the inner surface of a porous α-alumina support. Helium permeation at different feed volumetric flows (11-41 mL/min) with different sweep flow rates (9-90 mL/min) at STP conditions was measured. The molar fraction was obtained as a function of the residence time ratio. The influences of the geometric parameters of the tubular system and the feed flow rates on the permeation through the membrane were investigated. The dependence of the permeances with the residence time ratio was experimentally obtained and we propose that this dependence is a useful design criterion for tubular membrane permeation systems. The best results in this work were obtained for Q He, in / Q N2, in = 0.22 for V SS / V TS = 7.3. Also, the data showed that an appropriate combination of the flows and the area sections of the system resulted in an optimum value for the Péclet number of 0.3. The experimental data were reproduced by numerically solving the Maxwell-Stefan equations under the assumption that transport across the membrane can be modeled in terms of a Robin-type boundary condition.

  12. Tubular cationized pullulan hydrogels as local reservoirs for plasmid DNA.

    PubMed

    San Juan, Aurélie; Ducrocq, Grégory; Hlawaty, Hanna; Bataille, Isabelle; Guénin, Erwann; Letourneur, Didier; Feldman, Laurent J

    2007-12-01

    In the present study, we measured the ability of various cationized pullulan tubular hydrogels to retain plasmid DNA, and tested the ability of retained plasmid DNA to transfect vascular smooth muscle cells (VSMCs). Cationized pullulans were obtained by grafting at different charge densities ethylamine (EA) or diethylaminoethylamine (DEAE) on the pullulan backbone. Polymers were characterized by elemental analysis, acid-base titration, size exclusion chromatography, Fourier-transform infrared spectroscopy, and proton nuclear magnetic resonance. The complexation of cationized pullulans in solution with plasmid DNA was evidenced by fluorescence quenching with PicoGreen. Cationized pullulans were then chemically crosslinked with phosphorus oxychloride to obtain tubular cationized pullulan hydrogels. Native pullulan tubes did not retain loaded plasmid DNA. In contrast, the ability of cationized pullulan tubes to retain plasmid DNA was dependent on both the amine content and the type of amine. The functional integrity of plasmid DNA in cationized pullulan tubes was demonstrated by in vitro transfection of VSMCs. Hence, cationized pullulan hydrogels can be designed as tubular structures with high affinity for plasmid DNA, which may provide new biomaterials to enhance the efficiency of local arterial gene transfer strategies.

  13. The rebirth of interest in renal tubular function.

    PubMed

    Lowenstein, Jerome; Grantham, Jared J

    2016-06-01

    The measurement of glomerular filtration rate by the clearance of inulin or creatinine has evolved over the past 50 years into an estimated value based solely on plasma creatinine concentration. We have examined some of the misconceptions and misunderstandings of the classification of renal disease and its course, which have followed this evolution. Furthermore, renal plasma flow and tubular function, which in the past were estimated by the clearance of the exogenous aryl amine, para-aminohippurate, are no longer measured. Over the past decade, studies in experimental animals with reduced nephron mass and in patients with reduced renal function have identified small gut-derived, protein-bound uremic retention solutes ("uremic toxins") that are poorly filtered but are secreted into the lumen by organic anion transporters (OATs) in the proximal renal tubule. These are not effectively removed by conventional hemodialysis or peritoneal dialysis. Residual renal function, urine produced in patients with advanced renal failure or undergoing dialysis treatment, may represent, at least in part, secretion of fluid and uremic toxins, such as indoxyl sulfate, mediated by proximal tubule OATs and might serve as a useful survival function. In light of this new evidence of the physiological role of proximal tubule OATs, we suggest that measurement of renal tubular function and renal plasma flow may be of considerable value in understanding and managing chronic kidney disease. Data obtained in normal subjects indicate that renal plasma flow and renal tubular function might be measured by the clearance of the endogenous aryl amine, hippurate.

  14. Augmented reality visualization of deformable tubular structures for surgical simulation.

    PubMed

    Ferrari, Vincenzo; Viglialoro, Rosanna Maria; Nicoli, Paola; Cutolo, Fabrizio; Condino, Sara; Carbone, Marina; Siesto, Mentore; Ferrari, Mauro

    2016-06-01

    Surgical simulation based on augmented reality (AR), mixing the benefits of physical and virtual simulation, represents a step forward in surgical training. However, available systems are unable to update the virtual anatomy following deformations impressed on actual anatomy. A proof-of-concept solution is described providing AR visualization of hidden deformable tubular structures using nitinol tubes sensorized with electromagnetic sensors. This system was tested in vitro on a setup comprised of sensorized cystic, left and right hepatic, and proper hepatic arteries. In the trial session, the surgeon deformed the tubular structures with surgical forceps in 10 positions. The mean, standard deviation, and maximum misalignment between virtual and real arteries were 0.35, 0.22, and 0.99 mm, respectively. The alignment accuracy obtained demonstrates the feasibility of the approach, which can be adopted in advanced AR simulations, in particular as an aid to the identification and isolation of tubular structures. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  15. Exciton Level Structure and Dynamics in Tubular Porphyrin Aggregates

    SciTech Connect

    Wan, Yan; Stradomska, Anna; Fong, Sarah; Guo, Zhi; Schaller, Richard D.; Wiederrecht, Gary P; Knoester, Jasper; Huang, Libai

    2014-10-30

    We present an account of the optical properties of the Frenkel excitons in self-assembled porphyrin tubular aggregates that represent an analog to natural photosynthetic antennae. Using a combination of ultrafast optical spectroscopy and stochastic exciton modeling, we address both linear and nonlinear exciton absorption, relaxation pathways, and the role of disorder. The static disorder-dominated absorption and fluorescence line widths show little temperature dependence for the lowest excitons (Q band), which we successfully simulate using a model of exciton scattering on acoustic phonons in the host matrix. Temperature-dependent transient absorption of and fluorescence from the excitons in the tubular aggregates are marked by nonexponential decays with time scales ranging from a few picoseconds to a few nanoseconds, reflecting complex relaxation mechanisms. Combined experimental and theoretical investigations indicate that nonradiative pathways induced by traps and defects dominate the relaxation of excitons in the tubular aggregates. We model the pumpprobe spectra and ascribe the excited-state absorption to transitions from one-exciton states to a manifold of mixed one- and two-exciton states. Our results demonstrate that while the delocalized Frenkel excitons (over 208 (1036) molecules for the optically dominant excitons in the Q (B) band) resulting from strong intermolecular coupling in these aggregates could potentially facilitate efficient energy transfer, fast relaxation due to defects and disorder probably present a major limitation for exciton transport over large distances.

  16. Renal Primary Cilia Lengthen after Acute Tubular Necrosis

    PubMed Central

    Verghese, Elizabeth; Ricardo, Sharon D.; Weidenfeld, Raphael; Zhuang, Junli; Hill, Prudence A.; Langham, Robyn G.

    2009-01-01

    Renal primary cilia are sensory antennas required for the maintenance of normal epithelial differentiation and proliferation in the kidney, but they also have a potential role in epithelial differentiation during renal injury and repair. In mice, tubular damage causes an increase in the length of renal cilia, which may modify their sensory sensitivity during repair. Here, we investigated whether the alteration of renal cilium length during renal injury is clinically relevant. Using biopsies of human renal transplants that suffered acute tubular necrosis during transplantation, we compared the length of renal primary cilia with renal function. Serial biopsies showed that acute tubular necrosis resulted in more than a doubling of cilium length throughout the nephron and collecting duct approximately 1 wk after injury. Allografts displayed a trend toward normalization of cilium length in later biopsies, and this correlated with functional recovery. A mouse model of renal ischemia-reperfusion confirmed the increase and subsequent regression of cilium length during renal repair, displaying complete normalization of cilium length within 6 wk of injury. These findings demonstrate that the length of renal cilia is a clinically relevant indicator of renal injury and repair. PMID:19608704

  17. Creep effect modeling for a core free tubular actuator

    NASA Astrophysics Data System (ADS)

    Sarban, Rahimullah; Oubaek, Jakob; Jones, Richard W.

    2009-03-01

    Of the range of dielectric EAP-based actuators that currently exist those having a cylindrical configuration are perhaps the most important. Up until now the most popular tubular actuator designs have exploited the exceptional pre-strain performance of the acrylics VHB 2910 and VHB 2905. Unfortunately pre-stained acrylic film rolled tubular actuators with a spring core experience problems concerning reliability and life expectancy. Partly because of these problems research is beginning to be directed towards the design, fabrication and characterisation of core free tubular actuators. This work reviews the Voltage-Strain modeling of core free rolled actuators that are constructed using a dielectric electro active polymer film that employs smart electrode technology. Position response tests, whereby a step input of 1500 V was applied to each actuator, confirmed that time dependent strain influences the Voltage-Strain behaviour of the actuators. To represent the time dependent strain behaviour a creep effect model was combined with Pelrine's electromechanical model to provide a more accurate representation of the Voltage-Strain characteristics of the actuators.

  18. Sex Differences in Renal Proximal Tubular Cell Homeostasis.

    PubMed

    Seppi, Thomas; Prajczer, Sinikka; Dörler, Maria-Magdalena; Eiter, Oliver; Hekl, Daniel; Nevinny-Stickel, Meinhard; Skvortsova, Iraida; Gstraunthaler, Gerhard; Lukas, Peter; Lechner, Judith

    2016-10-01

    Studies in human patients and animals have revealed sex-specific differences in susceptibility to renal diseases. Because actions of female sex hormones on normal renal tissue might protect against damage, we searched for potential influences of the female hormone cycle on basic renal functions by studying excretion of urinary marker proteins in healthy human probands. We collected second morning spot urine samples of unmedicated naturally ovulating women, postmenopausal women, and men daily and determined urinary excretion of the renal tubular enzymes fructose-1,6-bisphosphatase and glutathione-S-transferase-α Additionally, we quantified urinary excretion of blood plasma proteins α1-microglobulin, albumin, and IgG. Naturally cycling women showed prominent peaks in the temporal pattern of urinary fructose-1,6-bisphosphatase and glutathione-S-transferase-α release exclusively within 7 days after ovulation or onset of menses. In contrast, postmenopausal women and men showed consistently low levels of urinary fructose-1,6-bisphosphatase excretion over comparable periods. We did not detect changes in urinary α1-microglobulin, albumin, or IgG excretion. Results of this study indicate that proximal tubular tissue architecture, representing a nonreproductive organ-derived epithelium, undergoes periodical adaptations phased by the female reproductive hormone cycle. The temporally delimited higher rate of enzymuria in ovulating women might be a sign of recurring increases of tubular cell turnover that potentially provide enhanced repair capacity and thus, higher resistance to renal damage.

  19. Ileal bladder substitute: antireflux nipple or afferent tubular segment?

    PubMed

    Studer, U E; Spiegel, T; Casanova, G A; Springer, J; Gerber, E; Ackermann, D K; Gurtner, F; Zingg, E J

    1991-01-01

    Spheroidal bladder substitutes made from double-folded ileal segments, similar to Goodwin's cup-patch technique, are devoid of major coordinated wall contractions. This, together with the reservoir's direct anastomosis to the membranous urethra, prevents major intraluminal pressure peaks and assures a residue-free voiding of sterile urine. In order to determine whether, under these conditions, an afferent tubular isoperistaltic ileal segment of 20-cm length protects the upper urinary tract as efficiently as an antireflux nipple, 60 male patients who were subjected to radical cystectomy were prospectively randomised to groups in which a bladder substitute was formed together with either of these 2 antireflux devices. An analysis of the results obtained in 20 patients from each group who could be followed for more than 1 year (median observation time 30 and 36 months) showed no differences between the groups in metabolic disturbances, kidney size, reservoir capacity, diurnal and nocturnal urinary continence, the incidence of urinary tract infection or episodes of acute pyelonephritis. Later than 1 year postoperatively, intravenous urograms of the renoureteral units of 25% of the patients with antireflux nipples showed persistent but generally slight dilatation of the upper urinary tracts. This observation was significantly more frequent than it was in patients with afferent tubular segments. Urodynamic and radiographic studies showed that the competence of the antireflux nipples was secured by the raised surrounding intravesical pressure. This, however, also resulted in a transient functional obstruction, and a gradual rise of the basal pressure in the upper urinary tracts was recorded. In patients with afferent ileal tubular segments, contrast medium could be forced upwards into the renal pelvis when the bladder substitutes were overfilled. However, despite raised intravesical pressures, peristalsis in the isoperistaltic afferent tubular segment gradually returned

  20. Mathematical modeling of methyl ester concentration distribution in a continuous membrane tubular reactor and comparison with conventional tubular reactor

    NASA Astrophysics Data System (ADS)

    Talaghat, M. R.; Jokar, S. M.; Modarres, E.

    2017-10-01

    The reduction of fossil fuel resources and environmental issues made researchers find alternative fuels include biodiesels. One of the most widely used methods for production of biodiesel on a commercial scale is transesterification method. In this work, the biodiesel production by a transesterification method was modeled. Sodium hydroxide was considered as a catalyst to produce biodiesel from canola oil and methanol in a continuous tubular ceramic membranes reactor. As the Biodiesel production reaction from triglycerides is an equilibrium reaction, the reaction rate constants depend on temperature and related linearly to catalyst concentration. By using the mass balance for a membrane tubular reactor and considering the variation of raw materials and products concentration with time, the set of governing equations were solved by numerical methods. The results clearly show the superiority of membrane reactor than conventional tubular reactors. Afterward, the influences of molar ratio of alcohol to oil, weight percentage of the catalyst, and residence time on the performance of biodiesel production reactor were investigated.

  1. Analysis of constant tissue remodeling in Syrian hamster Harderian gland: intra-tubular and inter-tubular syncytial masses.

    PubMed

    Coto-Montes, Ana; García-Macía, Marina; Caballero, Beatriz; Sierra, Verónica; Rodríguez-Colunga, María J; Reiter, Russel J; Vega-Naredo, Ignacio

    2013-05-01

    The Syrian hamster Harderian gland (HG) has a marked sexual dimorphism and exhibits an extraordinary rate of porphyrinogenesis. The physiological oxidative stress, derived from constant porphyrin production, is so high that the HG needs additional survival autophagic mechanisms to fight against this chronic exposure, provoking the triggering of a holocrine secretion in female glands that forms two types of secretory masses: intra-tubular-syncytial and inter-tubular-syncytial masses. The aim of this work was to study the development of this inter-tubular holocrine secretion. To approach this task, we have considered that the steps developed during the formation of the so-called invasive masses consist of the growth of epithelial cells, cell detachment from the basal lamina and invasion of surrounding tissues. The presence of these masses, particularly in the female HG, are closely linked to sexual dimorphism in redox balance and to alterations in the expression of certain factors such as cytokeratins, P-cadherin, matrix metalloproteinases, cathepsin H, proliferating cell nuclear antigen, p53, CD-31 and vascular endothelial growth factor, which seem to be involved in tissue remodeling. The results document unusual mechanisms of secretion in Syrian hamster HG: an extraordinary system of massive secretion through the conjunctive tissue, disrupting the branched structure of the gland.

  2. Mathematical modeling of methyl ester concentration distribution in a continuous membrane tubular reactor and comparison with conventional tubular reactor

    NASA Astrophysics Data System (ADS)

    Talaghat, M. R.; Jokar, S. M.; Modarres, E.

    2017-04-01

    The reduction of fossil fuel resources and environmental issues made researchers find alternative fuels include biodiesels. One of the most widely used methods for production of biodiesel on a commercial scale is transesterification method. In this work, the biodiesel production by a transesterification method was modeled. Sodium hydroxide was considered as a catalyst to produce biodiesel from canola oil and methanol in a continuous tubular ceramic membranes reactor. As the Biodiesel production reaction from triglycerides is an equilibrium reaction, the reaction rate constants depend on temperature and related linearly to catalyst concentration. By using the mass balance for a membrane tubular reactor and considering the variation of raw materials and products concentration with time, the set of governing equations were solved by numerical methods. The results clearly show the superiority of membrane reactor than conventional tubular reactors. Afterward, the influences of molar ratio of alcohol to oil, weight percentage of the catalyst, and residence time on the performance of biodiesel production reactor were investigated.

  3. Analysis of constant tissue remodeling in Syrian hamster Harderian gland: intra-tubular and inter-tubular syncytial masses

    PubMed Central

    Coto-Montes, Ana; García-Macía, Marina; Caballero, Beatriz; Sierra, Verónica; Rodríguez-Colunga, María J; Reiter, Russel J; Vega-Naredo, Ignacio

    2013-01-01

    The Syrian hamster Harderian gland (HG) has a marked sexual dimorphism and exhibits an extraordinary rate of porphyrinogenesis. The physiological oxidative stress, derived from constant porphyrin production, is so high that the HG needs additional survival autophagic mechanisms to fight against this chronic exposure, provoking the triggering of a holocrine secretion in female glands that forms two types of secretory masses: intra-tubular-syncytial and inter-tubular-syncytial masses. The aim of this work was to study the development of this inter-tubular holocrine secretion. To approach this task, we have considered that the steps developed during the formation of the so-called invasive masses consist of the growth of epithelial cells, cell detachment from the basal lamina and invasion of surrounding tissues. The presence of these masses, particularly in the female HG, are closely linked to sexual dimorphism in redox balance and to alterations in the expression of certain factors such as cytokeratins, P-cadherin, matrix metalloproteinases, cathepsin H, proliferating cell nuclear antigen, p53, CD-31 and vascular endothelial growth factor, which seem to be involved in tissue remodeling. The results document unusual mechanisms of secretion in Syrian hamster HG: an extraordinary system of massive secretion through the conjunctive tissue, disrupting the branched structure of the gland. PMID:23496762

  4. Configurable hot spot fixing system

    NASA Astrophysics Data System (ADS)

    Kajiwara, Masanari; Kobayashi, Sachiko; Mashita, Hiromitsu; Aburada, Ryota; Furuta, Nozomu; Kotani, Toshiya

    2014-03-01

    Hot spot fixing (HSF) method has been used to fix many hot spots automatically. However, conventional HSF based on a biasing based modification is difficult to fix many hot spots under a low-k1 lithography condition. In this paper we proposed a new HSF, called configurable hotspot fixing system. The HSF has two major concepts. One is a new function to utilize vacant space around a hot spot by adding new patterns or extending line end edges around the hot spot. The other is to evaluate many candidates at a time generated by the new functions. We confirmed the proposed HSF improves 73% on the number of fixing hot spots and reduces total fixing time by 50% on a device layout equivalent to 28nm-node. The result shows the proposed HSF is effective for layouts under the low-k1 lithography condition.

  5. Monolithical aspherical beam expanding systems

    NASA Astrophysics Data System (ADS)

    Fuchs, U.; Matthias, Sabrina

    2014-10-01

    Beam expanding is a common task, where Galileo telescopes are preferred. However researches and customers have found limitations when using these systems. A new monolithical solution which is based on the usage of only one aspherical component will be presented. It will be shown how to combine up to five monolithical beam expanding systems and to keep the beam quality at diffraction limitation. Insights will be given how aspherical beam expanding systems will help using larger incoming beams and reducing the overall length of such a system. Additionally an add-on element for divergence and wavelength adaption will be presented.

  6. Bioinspired coupled helical coils for soft tissue engineering of tubular structures - Improved mechanical behavior of tubular collagen type I templates.

    PubMed

    Janke, H P; Bohlin, J; Lomme, R M L M; Mihaila, S M; Hilborn, J; Feitz, W F J; Oosterwijk, E

    2017-09-01

    The design of constructs for tubular tissue engineering is challenging. Most biomaterials need to be reinforced with supporting structures such as knittings, meshes or electrospun material to comply with the mechanical demands of native tissues. In this study, coupled helical coils (CHCs) were manufactured to mimic collagen fiber orientation as found in nature. Monofilaments of different commercially available biodegradable polymers were wound and subsequently fused, resulting in right-handed and left-handed polymer helices fused together in joints where the filaments cross. CHCs of different polymer composition were tested to determine the tensile strength, strain recovery, hysteresis, compressive strength and degradation of CHCs of different composition. Subsequently, seamless and stable hybrid constructs consisting of PDSII® USP 2-0 CHCs embedded in porous collagen type I were produced. Compared to collagen alone, this hybrid showed superior strain recovery (93.5±0.9% vs 71.1±12.6% in longitudinal direction; 87.1±6.6% vs 57.2±4.6% in circumferential direction) and hysteresis (18.9±2.7% vs 51.1±12.0% in longitudinal direction; 11.5±4.6% vs 46.3±6.3% in circumferential direction). Furthermore, this hybrid construct showed an improved Young's modulus in both longitudinal (0.5±0.1MPavs 0.2±0.1MPa; 2.5-fold) and circumferential (1.65±0.07MPavs (2.9±0.3)×10(-2)MPa; 57-fold) direction, respectively, compared to templates created from collagen alone. Moreover, hybrid template characteristics could be modified by changing the CHC composition and CHCs were produced showing a mechanical behavior similar to the native ureter. CHC-enforced templates, which are easily tunable to meet different demands may be promising for tubular tissue engineering. Most tubular constructs lack sufficient strength and tunability to comply with the mechanical demands of native tissues. Therefore, we embedded coupled helical coils (CHCs) produced from biodegradable polymers - to

  7. Simple Robust Fixed Lag Smoothing

    DTIC Science & Technology

    1988-12-02

    SIMPLE ROBUST FIXED LAG SMOOTHING by ~N. D. Le R.D. Martin 4 TECHNICAL RlEPORT No. 149 December 1988 Department of Statistics, GN-22 Accesion For...frLsD1ist Special A- Z Simple Robust Fixed Lag Smoothing With Application To Radar Glint Noise * N. D. Le R. D. Martin Department of Statistics, GN...smoothers. The emphasis here is on fixed-lag smoothing , as opposed to the use of existing robust fixed interval smoothers (e.g., as in Martin, 1979

  8. Advanced expander test bed program

    NASA Technical Reports Server (NTRS)

    Riccardi, D. P.; Mitchell, J. C.

    1993-01-01

    The Advanced Expander Test Bed (AETB) is a key element in NASA's Space Chemical Engine Technology Program for development and demonstration of expander cycle oxygen/hydrogen engine and advanced component technologies applicable to space engines as well as launch vehicle upper stage engines. The AETB will be used to validate the high-pressure expander cycle concept, investigate system interactions, and conduct investigations of advanced mission focused components and new health monitoring techniques in an engine system environment. The split expander cycle AETB will operate at combustion chamber pressures up to 1200 psia with propellant flow rates equivalent to 20,000 lbf vacuum thrust. Contract work began 27 Apr. 1990. During 1992, a major milestone was achieved with the review of the final design of the oxidizer turbopump in Sep. 1992.

  9. Urinary enzymes and low molecular weight proteins as markers of tubular dysfunction.

    PubMed

    Jung, K

    1994-11-01

    Reference intervals of different tubular markers, that is, low molecular weight proteins and urinary enzymes, show divergent data and wide ranges. The problems in establishing reference intervals for the tubular markers are caused by the necessarily different analytical methods. Also, the general rules of determining reference limits as well as the numerous physiological variables influencing tubular function are often not sufficiently taken into consideration. Compared to blood components, urinary tubular markers show a wide variability of values. This is due to the fact that the excretion of enzymes and proteins into urine represents an excretion into an open system. The influences of variables like age, sex, physical exercise, different urine flow rates, and biorhythms are immediately reflected by changed excretion rates of tubular markers. The problems occurring when the second morning urine sample is being used as a "standardized" collection method and the basis to characterize tubular function by analyte/creatinine ratios are discussed in this paper.

  10. Influence of design parameters of discharge passage on the performance of shaft tubular pumping system

    NASA Astrophysics Data System (ADS)

    Zhu, H. G.; Zhang, R. T.; Xia, J.; Zhou, H. B.; Tang, X. C.

    2013-12-01

    Shaft tubular pumping systems with straight discharge passage are more widely adopted because they possesses many advantages such as easier installation of pump sets, better ventilation for motor and transmission devices, open access to inspect pump sets and lower cost for maintenance. The design parameters of a straight discharge passage will directly affect hydraulic loss and energy performance of the shaft pumping system. The optimal hydraulic design of discharge passages is carried out under the guideline of Pump Station Design Code to satisfy optimal design objectives. Computational fluid dynamics is applied to simulate the internal flow of a shaft pumping system the influence of its design parameter on the system performance is investigated. Keeping the shaft and suction box unchanged, six discharge passage design schemes with different length and outlet width are compared based on CFD to analyze the internal flow fields and their energy performances are predicted. The computed results indicate that when the outlet width of discharge passage is fixed, the longer the discharge passage, the better the internal flow fields with smaller backflow and vortex zone inside the passage. When the length of discharge passage is determined, the axial velocity distribution uniformity and bias angle in the outlet section will vary with the value of the outlet width. Optimal hydraulic design of discharge passages can achieve better internal flow and higher pumping efficiency.

  11. Effects of antidiuretic hormone on urinary acidification and on tubular handling of bicarbonate in the rat.

    PubMed Central

    Bichara, M; Mercier, O; Houillier, P; Paillard, M; Leviel, F

    1987-01-01

    Paired micropuncture experiments were carried out in plasma-replete volume-expanded rats to examine the acute effects of 1-desamino-8-D-arginine vasopressin (dDAVP) on urinary acidification and tubular handling of bicarbonate and chloride. No effect was detected on the fractional absorption of water, total CO2, and chloride at end-proximal and early distal sites of superficial nephrons in intact animals; dDAVP, however, inhibited the fractional absorption of total CO2 in Henle's loop while stimulating that of chloride in thyroparathyroidectomized (TPTX) somatostatin-infused rats. In the distal tubule accessible to micropuncture, net total CO2 secretion was observed during hypotonic volume expansion, which reversed to net total CO2 absorption during dDAVP infusion in intact Wistar rats. Marked stimulation of urinary acidification occurred in all animals as attested by a fall in urine pH and bicarbonate excretion. Net acid excretion almost doubled in intact rats. We conclude that (a) antidiuretic hormone (ADH) inhibits fractional bicarbonate absorption in the thick ascending limb while stimulating that of chloride at least in TPTX somatostatin-infused rats, and (b) ADH stimulates proton secretion (or inhibits bicarbonate secretion) in the distal tubule and cortical collecting ducts, which leads to enhanced urinary acidification. PMID:3624481

  12. Competitive inhibition of renal tubular secretion of gemifloxacin by probenecid.

    PubMed

    Landersdorfer, Cornelia B; Kirkpatrick, Carl M J; Kinzig, Martina; Bulitta, Jürgen B; Holzgrabe, Ulrike; Drusano, George L; Sörgel, Fritz

    2009-09-01

    Probenecid interacts with transport processes of drugs at several sites in the body. For most quinolones, renal clearance is reduced by concomitant administration of probenecid. The interaction between gemifloxacin and probenecid has not yet been studied. We studied the extent, time course, site(s), and mechanism of this interaction. Seventeen healthy volunteers participated in a randomized, two-way crossover study. Subjects received 320 mg gemifloxacin as an oral tablet without and with 4.5 g probenecid divided in eight oral doses. Drug concentrations in plasma and urine were analyzed by liquid chromatography-tandem mass spectrometry. WinNonlin was used for noncompartmental analysis, compartmental modeling, and statistics, and NONMEM was used for visual predictive checks. Concomitant administration of probenecid increased plasma gemifloxacin concentrations and amounts excreted in urine compared to baseline amounts. Data are average estimates (percent coefficients of variation). Modeling showed a competitive inhibition of the renal tubular secretion of gemifloxacin by probenecid as the most likely mechanism of the interaction. The estimated K(m) and Vmax for the saturable part of renal elimination were 9.16 mg/liter (20%) and 113 mg/h (21%), respectively. Based on the molar ratio, the affinity for the renal transporter was 10-fold higher for gemifloxacin than for probenecid. Since probenecid reached an approximately 200-times-higher area under the molar concentration-time curve from 0 to 24 h than gemifloxacin, probenecid inhibited the active tubular secretion of gemifloxacin. Probenecid also reduced the nonrenal clearance of gemifloxacin from 25.2 (26%) to 21.0 (23%) liters/h. Probenecid inhibited the renal tubular secretion of gemifloxacin, most likely by a competitive mechanism, and slightly decreased nonrenal clearance of gemifloxacin.

  13. Competitive Inhibition of Renal Tubular Secretion of Gemifloxacin by Probenecid▿

    PubMed Central

    Landersdorfer, Cornelia B.; Kirkpatrick, Carl M. J.; Kinzig, Martina; Bulitta, Jürgen B.; Holzgrabe, Ulrike; Drusano, George L.; Sörgel, Fritz

    2009-01-01

    Probenecid interacts with transport processes of drugs at several sites in the body. For most quinolones, renal clearance is reduced by concomitant administration of probenecid. The interaction between gemifloxacin and probenecid has not yet been studied. We studied the extent, time course, site(s), and mechanism of this interaction. Seventeen healthy volunteers participated in a randomized, two-way crossover study. Subjects received 320 mg gemifloxacin as an oral tablet without and with 4.5 g probenecid divided in eight oral doses. Drug concentrations in plasma and urine were analyzed by liquid chromatography-tandem mass spectrometry. WinNonlin was used for noncompartmental analysis, compartmental modeling, and statistics, and NONMEM was used for visual predictive checks. Concomitant administration of probenecid increased plasma gemifloxacin concentrations and amounts excreted in urine compared to baseline amounts. Data are average estimates (percent coefficients of variation). Modeling showed a competitive inhibition of the renal tubular secretion of gemifloxacin by probenecid as the most likely mechanism of the interaction. The estimated Km and Vmax for the saturable part of renal elimination were 9.16 mg/liter (20%) and 113 mg/h (21%), respectively. Based on the molar ratio, the affinity for the renal transporter was 10-fold higher for gemifloxacin than for probenecid. Since probenecid reached an ∼200-times-higher area under the molar concentration-time curve from 0 to 24 h than gemifloxacin, probenecid inhibited the active tubular secretion of gemifloxacin. Probenecid also reduced the nonrenal clearance of gemifloxacin from 25.2 (26%) to 21.0 (23%) liters/h. Probenecid inhibited the renal tubular secretion of gemifloxacin, most likely by a competitive mechanism, and slightly decreased nonrenal clearance of gemifloxacin. PMID:19564368

  14. High temperature helical tubular receiver for concentrating solar power system

    NASA Astrophysics Data System (ADS)

    Hossain, Nazmul

    In the field of conventional cleaner power generation technology, concentrating solar power systems have introduced remarkable opportunity. In a solar power tower, solar energy concentrated by the heliostats at a single point produces very high temperature. Falling solid particles or heat transfer fluid passing through that high temperature region absorbs heat to generate electricity. Increasing the residence time will result in more heat gain and increase efficiency. A novel design of solar receiver for both fluid and solid particle is approached in this paper which can increase residence time resulting in higher temperature gain in one cycle compared to conventional receivers. The helical tubular solar receiver placed at the focused sunlight region meets the higher outlet temperature and efficiency. A vertical tubular receiver is modeled and analyzed for single phase flow with molten salt as heat transfer fluid and alloy625 as heat transfer material. The result is compared to a journal paper of similar numerical and experimental setup for validating our modeling. New types of helical tubular solar receivers are modeled and analyzed with heat transfer fluid turbulent flow in single phase, and granular particle and air plug flow in multiphase to observe the temperature rise in one cyclic operation. The Discrete Ordinate radiation model is used for numerical analysis with simulation software Ansys Fluent 15.0. The Eulerian granular multiphase model is used for multiphase flow. Applying the same modeling parameters and boundary conditions, the results of vertical and helical receivers are compared. With a helical receiver, higher temperature gain of heat transfer fluid is achieved in one cycle for both single phase and multiphase flow compared to the vertical receiver. Performance is also observed by varying dimension of helical receiver.

  15. Minimally invasive tubular access for posterior cervical foraminotomy

    PubMed Central

    Branch, Byron C.; Hilton, Donald L.; Watts, Clark

    2015-01-01

    Background: Minimally invasive tubular access for posterior cervical foraminotomy can be an effective and safe technique for decompression of the nerve root utilizing minimally invasive muscle splitting with routine outpatient discharge. This technique has come under scrutiny calling into question the associated learning curve, a subjective limited exposure provided, and an argument that the risks and complications are largely unknown. In response to previously published critiques, this study aims to describe the outcomes and complications associated with this technique in a large patient series. Methods: A retrospective chart review was performed from 1999 to 2013 capturing a single surgeon's experience with the minimally invasive tubular access for posterior cervical foraminotomy technique from a single institution, encompassing 463 patients. Surgical outcome documented at follow-up and complications were obtained from this patient series. Additional variables analyzed include: Hospital length of stay, number of levels operated, targeted root for decompression, side operated, length of surgery, and estimated blood loss. Results: Outpatient discharge was achieved in 91.6% of cases. There were 10 complications (2.2%) among the 463 patients undergoing this technique from 1999 to 2013. Patients were followed for an average of 1 year and 2 months postoperatively. Improvement from the preoperative condition was observed in 98.2% of patients and excellent outcomes with patients reporting complete relief of symptoms with no or mild residual discomfort was seen in 92.2%. Conclusions: Compared with open techniques, minimally invasive tubular access for posterior cervical foraminotomy demonstrates comparable, if not superior, complication rates, and patient outcomes. PMID:26009705

  16. Tubular Overexpression of Gremlin Induces Renal Damage Susceptibility in Mice

    PubMed Central

    Droguett, Alejandra; Krall, Paola; Burgos, M. Eugenia; Valderrama, Graciela; Carpio, Daniel; Ardiles, Leopoldo; Rodriguez-Diez, Raquel; Kerr, Bredford; Walz, Katherina; Ruiz-Ortega, Marta; Egido, Jesus; Mezzano, Sergio

    2014-01-01

    A growing number of patients are recognized worldwide to have chronic kidney disease. Glomerular and interstitial fibrosis are hallmarks of renal progression. However, fibrosis of the kidney remains an unresolved challenge, and its molecular mechanisms are still not fully understood. Gremlin is an embryogenic gene that has been shown to play a key role in nephrogenesis, and its expression is generally low in the normal adult kidney. However, gremlin expression is elevated in many human renal diseases, including diabetic nephropathy, pauci-immune glomerulonephritis and chronic allograft nephropathy. Several studies have proposed that gremlin may be involved in renal damage by acting as a downstream mediator of TGF-β. To examine the in vivo role of gremlin in kidney pathophysiology, we generated seven viable transgenic mouse lines expressing human gremlin (GREM1) specifically in renal proximal tubular epithelial cells under the control of an androgen-regulated promoter. These lines demonstrated 1.2- to 200-fold increased GREM1 expression. GREM1 transgenic mice presented a normal phenotype and were without proteinuria and renal function involvement. In response to the acute renal damage cause by folic acid nephrotoxicity, tubule-specific GREM1 transgenic mice developed increased proteinuria after 7 and 14 days compared with wild-type treated mice. At 14 days tubular lesions, such as dilatation, epithelium flattening and hyaline casts, with interstitial cell infiltration and mild fibrosis were significantly more prominent in transgenic mice than wild-type mice. Tubular GREM1 overexpression was correlated with the renal upregulation of profibrotic factors, such as TGF-β and αSMA, and with increased numbers of monocytes/macrophages and lymphocytes compared to wild-type mice. Taken together, our results suggest that GREM1-overexpressing mice have an increased susceptibility to renal damage, supporting the involvement of gremlin in renal damage progression. This

  17. Tubular overexpression of gremlin induces renal damage susceptibility in mice.

    PubMed

    Droguett, Alejandra; Krall, Paola; Burgos, M Eugenia; Valderrama, Graciela; Carpio, Daniel; Ardiles, Leopoldo; Rodriguez-Diez, Raquel; Kerr, Bredford; Walz, Katherina; Ruiz-Ortega, Marta; Egido, Jesus; Mezzano, Sergio

    2014-01-01

    A growing number of patients are recognized worldwide to have chronic kidney disease. Glomerular and interstitial fibrosis are hallmarks of renal progression. However, fibrosis of the kidney remains an unresolved challenge, and its molecular mechanisms are still not fully understood. Gremlin is an embryogenic gene that has been shown to play a key role in nephrogenesis, and its expression is generally low in the normal adult kidney. However, gremlin expression is elevated in many human renal diseases, including diabetic nephropathy, pauci-immune glomerulonephritis and chronic allograft nephropathy. Several studies have proposed that gremlin may be involved in renal damage by acting as a downstream mediator of TGF-β. To examine the in vivo role of gremlin in kidney pathophysiology, we generated seven viable transgenic mouse lines expressing human gremlin (GREM1) specifically in renal proximal tubular epithelial cells under the control of an androgen-regulated promoter. These lines demonstrated 1.2- to 200-fold increased GREM1 expression. GREM1 transgenic mice presented a normal phenotype and were without proteinuria and renal function involvement. In response to the acute renal damage cause by folic acid nephrotoxicity, tubule-specific GREM1 transgenic mice developed increased proteinuria after 7 and 14 days compared with wild-type treated mice. At 14 days tubular lesions, such as dilatation, epithelium flattening and hyaline casts, with interstitial cell infiltration and mild fibrosis were significantly more prominent in transgenic mice than wild-type mice. Tubular GREM1 overexpression was correlated with the renal upregulation of profibrotic factors, such as TGF-β and αSMA, and with increased numbers of monocytes/macrophages and lymphocytes compared to wild-type mice. Taken together, our results suggest that GREM1-overexpressing mice have an increased susceptibility to renal damage, supporting the involvement of gremlin in renal damage progression. This

  18. Fixed points of quantum gravity.

    PubMed

    Litim, Daniel F

    2004-05-21

    Euclidean quantum gravity is studied with renormalization group methods. Analytical results for a nontrivial ultraviolet fixed point are found for arbitrary dimensions and gauge fixing parameters in the Einstein-Hilbert truncation. Implications for quantum gravity in four dimensions are discussed.

  19. Computed tomography in suspected osteoid osteomas of tubular bones

    SciTech Connect

    Herrlin, K.; Ekelund, L.; Loevdahl, R.; Persson, B.

    1982-12-01

    Six cases of suspected osteoid osteoma of tubular bones were evaluated by computed tomography (CT). In all cases a radiolucent nidus was clearly demonstrated. In two cases a radiodense center of the nidus was visualized. It is suggested that CT may replace conventional tomography in the evaluation of these lesions. Due to its ability to locate the lesion in the transverse plane, CT is superior for the exact planning of surgery to avoid unnecessary large or misdirected resections. Adequate window settings are essential in the evaluation of these lesions.

  20. Ibuprofen-related renal tubular acidosis in pregnancy.

    PubMed

    Mallett, Andrew; Lynch, Matthew; John, George T; Healy, Helen; Lust, Karin

    2011-09-01

    Ibuprofen-related renal tubular acidosis (RTA) has not been previously described in pregnancy but its occurrence outside of pregnancy is being increasingly described. In this case, a 34-year-old woman presented in the third trimester of pregnancy with Type 1 or distal RTA related to ibuprofen and codeine abuse. It was complicated by acute on chronic renal dysfunction and hypokalemia. Delivery at 37 weeks gestation due to concerns of evolving preeclampsia resulted in the birth of a healthy neonate. RTA and hypokalemia were remediated and ibuprofen and codeine abuse ceased. Some renal dysfunction however continued. Thorough and repeated history taking as well as vigilance for this condition is suggested.

  1. Control system architecture for robotic welding of tubular joints

    SciTech Connect

    Madsen, O.; Holm, H.; Lauridsen, J.K.

    1996-12-31

    This paper presents the architecture of a geometry model and sensor based control system for robotic welding of tubular joints. The functional architecture of the system is described with the main emphasis on the overall mode of operation of the system. Furthermore, it is described how measurements of the physical seam profile are used to update a reference geometry model, and how welding control variables are generated based on the updated reference geometry. Finally, it is illustrated how the use of a reference geometry can improve the flexibility and robustness of the system.

  2. Type 4 renal tubular acidosis in a kidney transplant recipient.

    PubMed

    Kulkarni, Manjunath

    2016-02-01

    We report a case of a 66-year-old diabetic patient who presented with muscle weakness 2 weeks after kidney transplantation. Her immunosuppressive regimen included tacrolimus, mycophenolate mofetil, and steroids. She was found to have hyperkalemia and normal anion gap metabolic acidosis. Tacrolimus levels were in therapeutic range. All other drugs such as beta blockers and trimethoprim - sulfamethoxazole were stopped. She did not respond to routine antikalemic measures. Further evaluation revealed type 4 renal tubular acidosis. Serum potassium levels returned to normal after starting sodium bicarbonate and fludrocortisone therapy. Though hyperkalemia is common in kidney transplant recipients, determining exact cause can guide specific treatment.

  3. Tubular Bioreactor for Probing Baculovirus Infection and Protein Production.

    PubMed

    Wu, Hsuan-Chen; Hu, Yu-Chen; Bentley, William E

    2016-01-01

    Probing the baculovirus infection process is essential in optimizing recombinant protein production. Typically, researchers monitor the infection process in stirred reactors that contain cells that have been infected at different times after virus inoculation, particularly if cells pass the primary infection and become infected by progeny virus. This chapter describes several alternative bioreactor systems for baculovirus infection. We provide an example alternative system that holds promise to avoid asynchronous distributions in infection time. Namely, we describe a two-stage reactor system consisting of an upstream continuous stirred tank reactor and a downstream tubular reactor with segmented plug flow for probing baculovirus infection and production.

  4. Performance of tubular members under cyclic axial loads

    SciTech Connect

    Shaker, R.E.; Murakawa, Hidekazu; Ueda, Yukio

    1995-12-31

    In this paper the behavior of pin-ended tubular steel members under cyclic axial loads is studied by using Finite Element Method (FEM) considering both geometrical and material non-linearities. The factors considered in this study are the cyclic loading characteristics (displacement amplitude and mean displacement), geometrical parameters (diameter-to-thickness ratio D/t and normalized slenderness ratio {lambda}) and inelastic characteristics of the material. The results of numerical analysis are closely examined with respect to both ultimate strength and energy dissipation capacity.

  5. Friction factors and roughness measurements of tubular mineral membranes

    NASA Astrophysics Data System (ADS)

    René, F.; Leuliet, J. C.; Delplace, F.

    1993-08-01

    No direct measurement of the relative roughness is available for mineral porous media because of the low mechanical resistance of such materials. In this study a method for the experimental determination of the internal diameter and the equivalent roughness is proposed for different commercial membranes used in ultrafiltration and microfiltration processes. The use of classical friction factor correlations is also discussed. The main results are the estimation of the hydraulic diameter of tubular membranes and the use of a quadratic form in order to predict friction factors and the equivalent roughness with an accuracy better than 15%.

  6. Hyperammonaemia in a child with distal renal tubular acidosis.

    PubMed

    Seracini, D; Poggi, G M; Pela, I

    2005-11-01

    A 5-month-old girl with distal renal tubular acidosis (RTA) and hyperammonaemia that had lasted for 12 days, despite metabolic acidosis correction, is presented in this report. The patient showed failure to thrive, poor feeding, hypotonia and vomiting crisis in absence of inborn errors of metabolism. Probably, hyperammonaemia was the result of an imbalance between the increased ammonia synthesis, in response to metabolic acidosis, and the impaired ammonia excretion, typical of distal RTA. Our case confirms that hyperammonaemia may be observed in distal RTA, mimicking an inborn error of metabolism, and it underlines that hyperammonaemia may persist several days after metabolic acidosis correction.

  7. Functionalization of polycarbonate with proteins; open-tubular enzymatic microreactors.

    PubMed

    Ogończyk, D; Jankowski, P; Garstecki, P

    2012-08-07

    This paper examines a set of techniques for the immobilization of enzymes on the surface of microchannels fabricated in polycarbonate (PC). Our experiments identify the method that uses combined physico-chemical immobilization on a layer of polyethyleneimine (PEI) as a reproducible vista for the robust immobilization of proteins. As an example, we demonstrate the fabrication, throughput and stability of an open-tubular reactor draped with alkaline phosphatase (ALP, EC 3.1.3.1) as a model enzyme. As PC is suitable for industrial applications the method could potentially be used to immobilize proteins in numbered-up implementations.

  8. Giant Candida mycetoma in an ascending aorta tubular graft.

    PubMed

    Di Benedetto, Giuseppe; Citro, Rodolfo; Longobardi, Antonio; Mastrogiovanni, Generoso; Panza, Antonio; Iesu, Severino; Bossone, Eduardo

    2013-09-01

    We report the case of a 46-year-old male hospitalized for abdominal pain and fever with history of a David procedure followed by an aortic valve replacement due to severe aortic regurgitation. Transesophageal echocardiography (TEE) and computed tomography showed a large mass floating in the aorta. After surgical excision of the vegetation, attached to the Dacron prosthesis, histological examination revealed Candida hyphae and spores confirming the diagnosis of a mycetoma in an ascending aorta tubular graft. At six-month follow-up, the patient was in good clinical condition without recurrence of the fungal mass on TEE. © 2013 Wiley Periodicals, Inc.

  9. Lethal activity of FADD death domain in renal tubular epithelial cells.

    PubMed

    Justo, P; Sanz, A B; Lorz, C; Egido, J; Ortiz, A

    2006-06-01

    Fas-associated death domain (FADD) is an adaptor protein that is required for the transmission of the death signal from lethal receptors of the tumor necrosis factor superfamily. FADD contains a death domain (DD) and a death effector domain (DED). As death receptors contribute to renal tubular injury and tubular cell FADD increases in acute renal failure, we have studied the function of FADD in tubular epithelium. FADD expression was studied in kidney samples from mice. In order to study the contribution of FADD to renal tubular cell survival, FADD or FADD-DD were overexpressed in murine tubular epithelium. FADD is expressed in renal tubules of the healthy kidney. Both FADD and FADD-DD induce apoptosis in primary cultures of murine tubular epithelium and in the murine cortical tubular cell line. Death induced by FADD-DD has apoptotic morphology, but differs from death receptor-induced apoptosis in that it is not blocked by inhibitors of caspases. Neither an inhibitor of serine proteases nor overexpression of antiapoptotic BclxL prevented cell death. However, the combination of caspase and serine protease inhibition was protective. FADD and FADD-DD overexpression decreased nuclear factor kappa B activity. These data suggest that FADD has a death regulatory function in renal tubular cells that is independent of death receptors. FADD-DD is sufficient to induce apoptosis in these cells. This information is relevant to understanding the role of FADD in tubular injury.

  10. Expression of cleaved caspase-3 in renal tubular cells in Plasmodium falciparum malaria patients.

    PubMed

    Wichapoon, Benjamas; Punsawad, Chuchard; Viriyavejakul, Parnpen

    2017-01-01

    In Plasmodium falciparum malaria, the clinical manifestation of acute kidney injury (AKI) is commonly associated with acute tubular necrosis (ATN) in the kidney tissues. Renal tubular cells often exhibit various degrees of cloudy swelling, cell degeneration, and frank necrosis. To study individual cell death, this study evaluates the degree of renal tubular necrosis in association with apoptosis in malarial kidneys. Kidney tissues from P. falciparum malaria with AKI (10 cases), and without AKI (10 cases) were evaluated for tubular pathology. Normal kidney tissues from 10 cases served as controls. Tubular necrosis was assessed quantitatively in kidney tissues infected with P. falciparum malaria, based on histopathological evaluation. In addition, the occurrence of apoptosis was investigated using cleaved caspase-3 marker. Correlation between tubular necrosis and apoptosis was analyzed. Tubular necrosis was found to be highest in P. falciparum malaria patients with AKI (36.44% ± 3.21), compared to non-AKI (15.88% ± 1.63) and control groups (2.58% ± 0.39) (all p < 0.001). In the AKI group, the distal tubules showed a significantly higher degree of tubular necrosis than the proximal tubules (p = 0.021) and collecting tubules (p = 0.033). Tubular necrosis was significantly correlated with the level of serum creatinine (r = 0.596, p = 0.006), and the occurrence of apoptosis (r = 0.681, p = 0.001). In malarial AKI, the process of apoptosis occurs in ATN. © 2016 Asian Pacific Society of Nephrology.

  11. A comparison of acute hospital charges after tubular versus open microdiskectomy.

    PubMed

    Cahill, Kevin S; Levi, Allan D; Cummock, Matthew D; Liao, Wensheng; Wang, Michael Y

    2013-01-01

    To determine if tubular microdiskectomy is associated with differences in hospital charges compared with open microdiskectomy. A retrospective review of patients who underwent tubular microdiskectomy or open microdiskectomy performed by the senior authors from 2007-2010 was performed. The primary outcome was inflation-adjusted total hospital charges for each procedure using itemized charge data obtained from the hospital finance department. Secondary outcomes included length of stay, complications, and operative times. There were 76 eligible patients (33 open microdiskectomy and 48 tubular microdiskectomy) identified during the study period. The mean total charge was $27,811 (standard deviation $11,198) in the open group compared with $22,358 (standard deviation $8695) in the tubular group. Total charges in the tubular group were on average $5453 less than in the open group (P = 0.02). There were no significant differences in operative times or complications. Length of stay was significantly shorter in the tubular group (mean 1.5 days open vs. 0.9 days tubular, P = 0.01). This analysis revealed significantly lower acute hospital charges associated with tubular microdiskectomy versus open microdiskectomy at an academic tertiary care hospital. These differences appear to the related to decreased use of postoperative resources in the tubular group. Copyright © 2013. Published by Elsevier Inc.

  12. Vibration analysis and sound field characteristics of a tubular ultrasonic radiator.

    PubMed

    Liang, Zhaofeng; Zhou, Guangping; Zhang, Yihui; Li, Zhengzhong; Lin, Shuyu

    2006-12-01

    A sort of tubular ultrasonic radiator used in ultrasonic liquid processing is studied. The frequency equation of the tubular radiator is derived, and its radiated sound field in cylindrical reactor is calculated using finite element method and recorded by means of aluminum foil erosion. The results indicate that sound field of tubular ultrasonic radiator in cylindrical reactor appears standing waves along both its radial direction and axial direction, and amplitudes of standing waves decrease gradually along its radial direction, and the numbers of standing waves along its axial direction are equal to the axial wave numbers of tubular radiator. The experimental results are in good agreement with calculated results.

  13. Expression of the Troponin C at 41C Gene in Adult Drosophila Tubular Muscles Depends upon Both Positive and Negative Regulatory Inputs.

    PubMed

    Chechenova, Maria B; Maes, Sara; Cripps, Richard M

    2015-01-01

    Most animals express multiple isoforms of structural muscle proteins to produce tissues with different physiological properties. In Drosophila, the adult muscles include tubular-type muscles and the fibrillar indirect flight muscles. Regulatory processes specifying tubular muscle fate remain incompletely understood, therefore we chose to analyze the transcriptional regulation of TpnC41C, a Troponin C gene expressed in the tubular jump muscles, but not in the fibrillar flight muscles. We identified a 300-bp promoter fragment of TpnC41C sufficient for the fiber-specific reporter expression. Through an analysis of this regulatory element, we identified two sites necessary for the activation of the enhancer. Mutations in each of these sites resulted in 70% reduction of enhancer activity. One site was characterized as a binding site for Myocyte Enhancer Factor-2. In addition, we identified a repressive element that prevents activation of the enhancer in other muscle fiber types. Mutation of this site increased jump muscle-specific expression of the reporter, but more importantly reporter expression expanded into the indirect flight muscles. Our findings demonstrate that expression of the TpnC41C gene in jump muscles requires integration of multiple positive and negative transcriptional inputs. Identification of the transcriptional regulators binding the cis-elements that we identified will reveal the regulatory pathways controlling muscle fiber differentiation.

  14. Long-term advantages of permanent expandable implants in breast aesthetic surgery.

    PubMed

    Berrino, P; Casabona, F; Santi, P

    1998-06-01

    Permanent expandable implants are widely used in breast reconstructive surgery, but their use in aesthetic surgery is still uncommon. Previous reports on breast expansion-augmentation using permanent expandable implants focused on immediate and early advantages but failed to evaluate long-term benefits, because the reservoir was removed a few months after implantation and the ability to adjust the implant size was lost. Since 1986, we have used permanent expandable implants in 129 women for unilateral or bilateral breast augmentation using the following approach: implants were positioned submuscularly through a transaxillary incision; the filling port was placed a few centimeters below the incision and permanently retained; the implants were positioned underinflated and then overexpanded starting 2 weeks after implantation; after a period of overinflation, deflation to the preoperatively planned volume was scheduled; patients' suggestions regarding final volume adjustments were followed; the effects of repeated overinflations and deflations were investigated in several different conditions. Permanent expandable implants offer unique long-term technical and psychological advantages in the management of highly demanding patients and in the following clinical situations: pregnancy, impending capsular contracture, contralateral progressive ptosis, tubular breasts(s), difficult mammographic examination, spontaneous deflation, and rippling. Disadvantages include economical cost, port-related problems, and repeated requests by patients for volume changes. Saline permanent expandable implants allowed less flexibility in adjusting the breast size and caused discomfort when overexpanded. Permanent expandable implants in breast aesthetic surgery offer several advantages, and because patients can play an active role in deciding volume adjustments, compliance is very high.

  15. Toward automated cochlear implant insertion using tubular manipulators

    NASA Astrophysics Data System (ADS)

    Granna, Josephine; Rau, Thomas S.; Nguyen, Thien-Dang; Lenarz, Thomas; Majdani, Omid; Burgner-Kahrs, Jessica

    2016-03-01

    During manual cochlear implant electrode insertion the surgeon is at risk to damage the intracochlear fine-structure, as the electrode array is inserted through a small opening in the cochlea blindly with little force-feedback. This paper addresses a novel concept for cochlear electrode insertion using tubular manipulators to reduce risks of causing trauma during insertion and to automate the insertion process. We propose a tubular manipulator incorporated into the electrode array composed of an inner wire within a tube, both elastic and helically shaped. It is our vision to use this manipulator to actuate the initially straight electrode array during insertion into the cochlea by actuation of the wire and tube, i.e. translation and slight axial rotation. In this paper, we evaluate the geometry of the human cochlea in 22 patient datasets in order to derive design requirements for the manipulator. We propose an optimization algorithm to automatically determine the tube set parameters (curvature, torsion, diameter, length) for an ideal final position within the cochlea. To prove our concept, we demonstrate that insertion can be realized in a follow-the-leader fashion for 19 out of 22 cochleas. This is possible with only 4 different tube/wire sets.

  16. Numerical investigation of cavitation performance on bulb tubular turbine

    NASA Astrophysics Data System (ADS)

    Sun, L. G.; Guo, P. C.; Zheng, X. B.; Luo, X. Q.

    2016-05-01

    The cavitation flow phenomena may occur in the bulb tubular turbine at some certain operation conditions, which even decrease the performance of units and causes insatiably noise and vibration when it goes worse. A steady cavitating flow numerical simulations study is carried out on the bulb tubular unit with the same blade pitch angle and different guide vane openings by using the commercial code ANSYS CFX in this paper. The phenomena of cavitation induction areas and development process are obtained and draws cavitation performance curves. The numerical results show that the travelling bubble cavity is the main types of cavitation development over a wide operating range of discharge and this type of cavitation begins to sensitive to the value of cavitation number when the discharge exceeding a certain valve, in this condition, it can lead to a severe free bubble formation with the gradually decrement of cavitation number. The reported cavitation performance curves results indicate that the flow blockage incident would happen because of a mount of free bubble formation in the flow passage when the cavity developed to certain extend, which caused head drop behavior and power broken dramatically and influenced the output power.

  17. Friction Mediates Scission of Tubular Membranes Scaffolded by BAR Proteins.

    PubMed

    Simunovic, Mijo; Manneville, Jean-Baptiste; Renard, Henri-François; Evergren, Emma; Raghunathan, Krishnan; Bhatia, Dhiraj; Kenworthy, Anne K; Voth, Gregory A; Prost, Jacques; McMahon, Harvey T; Johannes, Ludger; Bassereau, Patricia; Callan-Jones, Andrew

    2017-06-29

    Membrane scission is essential for intracellular trafficking. While BAR domain proteins such as endophilin have been reported in dynamin-independent scission of tubular membrane necks, the cutting mechanism has yet to be deciphered. Here, we combine a theoretical model, in vitro, and in vivo experiments revealing how protein scaffolds may cut tubular membranes. We demonstrate that the protein scaffold bound to the underlying tube creates a frictional barrier for lipid diffusion; tube elongation thus builds local membrane tension until the membrane undergoes scission through lysis. We call this mechanism friction-driven scission (FDS). In cells, motors pull tubes, particularly during endocytosis. Through reconstitution, we show that motors not only can pull out and extend protein-scaffolded tubes but also can cut them by FDS. FDS is generic, operating even in the absence of amphipathic helices in the BAR domain, and could in principle apply to any high-friction protein and membrane assembly. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Nano-Tubular Cellulose for Bioprocess Technology Development

    PubMed Central

    Koutinas, Athanasios A.; Sypsas, Vasilios; Kandylis, Panagiotis; Michelis, Andreas; Bekatorou, Argyro; Kourkoutas, Yiannis; Kordulis, Christos; Lycourghiotis, Alexis; Banat, Ibrahim M.; Nigam, Poonam; Marchant, Roger; Giannouli, Myrsini; Yianoulis, Panagiotis

    2012-01-01

    Delignified cellulosic material has shown a significant promotional effect on the alcoholic fermentation as yeast immobilization support. However, its potential for further biotechnological development is unexploited. This study reports the characterization of this tubular/porous cellulosic material, which was done by SEM, porosimetry and X-ray powder diffractometry. The results showed that the structure of nano-tubular cellulose (NC) justifies its suitability for use in “cold pasteurization” processes and its promoting activity in bioprocessing (fermentation). The last was explained by a glucose pump theory. Also, it was demonstrated that crystallization of viscous invert sugar solutions during freeze drying could not be otherwise achieved unless NC was present. This effect as well as the feasibility of extremely low temperature fermentation are due to reduction of the activation energy, and have facilitated the development of technologies such as wine fermentations at home scale (in a domestic refrigerator). Moreover, NC may lead to new perspectives in research such as the development of new composites, templates for cylindrical nano-particles, etc. PMID:22496794

  19. Nano-tubular cellulose for bioprocess technology development.

    PubMed

    Koutinas, Athanasios A; Sypsas, Vasilios; Kandylis, Panagiotis; Michelis, Andreas; Bekatorou, Argyro; Kourkoutas, Yiannis; Kordulis, Christos; Lycourghiotis, Alexis; Banat, Ibrahim M; Nigam, Poonam; Marchant, Roger; Giannouli, Myrsini; Yianoulis, Panagiotis

    2012-01-01

    Delignified cellulosic material has shown a significant promotional effect on the alcoholic fermentation as yeast immobilization support. However, its potential for further biotechnological development is unexploited. This study reports the characterization of this tubular/porous cellulosic material, which was done by SEM, porosimetry and X-ray powder diffractometry. The results showed that the structure of nano-tubular cellulose (NC) justifies its suitability for use in "cold pasteurization" processes and its promoting activity in bioprocessing (fermentation). The last was explained by a glucose pump theory. Also, it was demonstrated that crystallization of viscous invert sugar solutions during freeze drying could not be otherwise achieved unless NC was present. This effect as well as the feasibility of extremely low temperature fermentation are due to reduction of the activation energy, and have facilitated the development of technologies such as wine fermentations at home scale (in a domestic refrigerator). Moreover, NC may lead to new perspectives in research such as the development of new composites, templates for cylindrical nano-particles, etc.

  20. Thermal conductivity modeling of core-shell and tubular nanowires.

    PubMed

    Yang, Ronggui; Chen, Gang; Dresselhaus, Mildred S

    2005-06-01

    The heteroepitaxial growth of crystalline core-shell nanostructures of a variety of materials has become possible in recent years, allowing the realization of various novel nanoscale electronic and optoelectronic devices. The increased surface or interface area will decrease the thermal conductivity of such nanostructures and impose challenges for the thermal management of such devices. In the meantime, the decreased thermal conductivity might benefit the thermoelectric conversion efficiency. In this paper, we present modeling results on the lattice thermal conductivity of core-shell and tubular nanowires along the wire axis direction using the phonon Boltzmann equation. We report the dependence of the thermal conductivity on the surface conditions and the core-shell geometry for silicon core-germanium shell and tubular silicon nanowires at room temperature. The results show that the effective thermal conductivity changes not only with the composition of the constituents but also with the radius of the nanowires and nanopores due to the nature of the ballistic phonon transport. The results in this work have implications for the design and operation of a variety of nanoelectronic devices, optoelectronic devices, and thermoelectric materials and devices.

  1. Advances in tubular solid oxide fuel cell technology

    SciTech Connect

    Singhal, S.C.

    1996-12-31

    The design, materials and fabrication processes for the earlier technology Westinghouse tubular geometry cell have been described in detail previously. In that design, the active cell components were deposited in the form of thin layers on a ceramic porous support tube (PST). The tubular design of these cells and the materials used therein have been validated by successful electrical testing for over 65,000 h (>7 years). In these early technology PST cells, the support tube, although sufficiently porous, presented an inherent impedance to air flow toward air electrode. In order to reduce such impedance to air flow, the wall thickness of the PST was first decreased from the original 2 mm (the thick-wall PST) to 1.2 mm (the thin-wall PST). The calcia-stabilized zirconia support tube has now been completely eliminated and replaced by a doped lanthanum manganite tube in state-of-the-art SOFCs. This doped lanthanum manganite tube is extruded and sintered to about 30 to 35 percent porosity, and serves as the air electrode onto which the other cell components are fabricated in thin layer form. These latest technology cells are designated as air electrode supported (AES) cells.

  2. Vibration dampener for dampening vibration of a tubular member

    DOEpatents

    Obermeyer, Franklin D.; Middlebrooks, Willis B.; DeMario, Edmund E.

    1994-01-01

    Vibration dampener for dampening vibration of a tubular member, such as an instrumentation tube of the type found in nuclear reactor pressure vessels. The instrumentation tube is received in an outer tubular member, such as a guide thimble tube. The vibration dampener comprises an annular sleeve which is attachable to the inside surface of the guide thimble tube and which is sized to surround the instrumentation tube. Dimples are attached to the interior wall of the sleeve for radially supporting the instrumentation tube. The wall of the sleeve has a flexible spring member, which is formed from the wall, disposed opposite the dimples for biasing the instrumentation tube into abutment with the dimples. Flow-induced vibration of the instrumentation tube will cause it to move out of contact with the dimples and further engage the spring member, which will flex a predetermined amount and exert a reactive force against the instrumentation tube to restrain its movement. The amount by which the spring member will flex is less than the unrestrained amplitude of vibration of the instrumentation tube. The reactive force exerted against the instrumentation tube will be sufficient to return it to its original axial position within the thimble tube. In this manner, vibration of the instrumentation tube is dampened so that in-core physics measurements are accurate and so that the instrumentation tube will not wear against the inside surface of the guide thimble tube.

  3. Vibration dampener for dampening vibration of a tubular member

    DOEpatents

    Obermeyer, F.D.; Middlebrooks, W.B.; DeMario, E.E.

    1994-10-18

    Vibration dampener for dampening vibration of a tubular member, such as an instrumentation tube of the type found in nuclear reactor pressure vessels is disclosed. The instrumentation tube is received in an outer tubular member, such as a guide thimble tube. The vibration dampener comprises an annular sleeve which is attachable to the inside surface of the guide thimble tube and which is sized to surround the instrumentation tube. Dimples are attached to the interior wall of the sleeve for radially supporting the instrumentation tube. The wall of the sleeve has a flexible spring member, which is formed from the wall, disposed opposite the dimples for biasing the instrumentation tube into abutment with the dimples. Flow-induced vibration of the instrumentation tube will cause it to move out of contact with the dimples and further engage the spring member, which will flex a predetermined amount and exert a reactive force against the instrumentation tube to restrain its movement. The amount by which the spring member will flex is less than the unrestrained amplitude of vibration of the instrumentation tube. The reactive force exerted against the instrumentation tube will be sufficient to return it to its original axial position within the thimble tube. In this manner, vibration of the instrumentation tube is dampened so that in-core physics measurements are accurate and so that the instrumentation tube will not wear against the inside surface of the guide thimble tube. 14 figs.

  4. Dynamic model of microalgal production in tubular photobioreactors.

    PubMed

    Fernández, I; Acién, F G; Fernández, J M; Guzmán, J L; Magán, J J; Berenguel, M

    2012-12-01

    A dynamic model for microalgal culture is presented. The model takes into account the fluid-dynamic and mass transfer, in addition to biological phenomena, it being based on fundamental principles. The model has been calibrated and validated using data from a pilot-scale tubular photobioreactor but it can be extended to other designs. It can be used to determine, from experimental measurements, the values of characteristic parameters. The model also allows a simulation of the system's dynamic behaviour in response to solar radiation, making it a useful tool for design and operation optimization of photobioreactors. Moreover, the model permits the identification of local pH gradients, dissolved oxygen and dissolved carbon dioxide; that can damage microalgae growth. In addition, the developed model can map the different characteristic time scales of phenomena inside microalgae cultures within tubular photobioreactors, meaning it is a valuable tool in the development of advanced control strategies for microalgae cultures. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Tubular aggregates of cyclic oligothiophenes. A theoretical study.

    PubMed

    Flores, Paola; Guadarrama, Patricia; Ramos, Estrella; Fomine, Serguei

    2008-05-01

    The geometries of neutral, mono-, and dioxidized tubular aggregates of cyclo[8]thiophenes containing up to 5 repeating units were fully optimized at the MPWB1K/3-21G* level of theory. Calculated interplane distances between macrocycles were found to be close to 3.1 A for neutral and charged aggregates. The binding energies between macrocycles in neutral intermediates were in the range of 40-45 kcal/mol, increasing for monocations and dropping strongly for dicationic species due to electrostatic repulsion between polarons. It was established that there exists a noticeable interaction between pi-orbitals of individual macrocycles in tubular aggregates as follows from decreasing of the band gap with a number of repeating units in aggregates and the polaron delocalization toward tube axes in oxidized species. A polaron pair is the most stable dicationic state for all studied molecules according to the calculations. A singlet polaron pair is more stable than a triplet one. The energy difference between singlet and triplet states is growing smaller with the size of the system, becoming zero for the pentamer corresponding to a completely dissociated bipolaron.

  6. Clinical review: Renal tubular acidosis – a physicochemical approach

    PubMed Central

    Ring, Troels; Frische, Sebastian; Nielsen, Søren

    2005-01-01

    The Canadian physiologist PA Stewart advanced the theory that the proton concentration, and hence pH, in any compartment is dependent on the charges of fully ionized and partly ionized species, and on the prevailing CO2 tension, all of which he dubbed independent variables. Because the kidneys regulate the concentrations of the most important fully ionized species ([K+], [Na+], and [Cl-]) but neither CO2 nor weak acids, the implication is that it should be possible to ascertain the renal contribution to acid–base homeostasis based on the excretion of these ions. One further corollary of Stewart's theory is that, because pH is solely dependent on the named independent variables, transport of protons to and from a compartment by itself will not influence pH. This is apparently in great contrast to models of proton pumps and bicarbonate transporters currently being examined in great molecular detail. Failure of these pumps and cotransporters is at the root of disorders called renal tubular acidoses. The unquestionable relation between malfunction of proton transporters and renal tubular acidosis represents a problem for Stewart theory. This review shows that the dilemma for Stewart theory is only apparent because transport of acid–base equivalents is accompanied by electrolytes. We suggest that Stewart theory may lead to new questions that must be investigated experimentally. Also, recent evidence from physiology that pH may not regulate acid–base transport is in accordance with the concepts presented by Stewart. PMID:16356241

  7. Additive manufacturing of patient-specific tubular continuum manipulators

    NASA Astrophysics Data System (ADS)

    Amanov, Ernar; Nguyen, Thien-Dang; Burgner-Kahrs, Jessica

    2015-03-01

    Tubular continuum robots, which are composed of multiple concentric, precurved, elastic tubes, provide more dexterity than traditional surgical instruments at the same diameter. The tubes can be precurved such that the resulting manipulator fulfills surgical task requirements. Up to now the only material used for the component tubes of those manipulators is NiTi, a super-elastic shape-memory alloy of nickel and titan. NiTi is a cost-intensive material and fabrication processes are complex, requiring (proprietary) technology, e.g. for shape setting. In this paper, we evaluate component tubes made of 3 different thermoplastic materials (PLA, PCL and nylon) using fused filament fabrication technology (3D printing). This enables quick and cost-effective production of custom, patient-specific continuum manipulators, produced on site on demand. Stress-strain and deformation characteristics are evaluated experimentally for 16 fabricated tubes of each thermoplastic with diameters and shapes equivalent to those of NiTi tubes. Tubes made of PCL and nylon exhibit properties comparable to those made of NiTi. We further demonstrate a tubular continuum manipulator composed of 3 nylon tubes in a transnasal, transsphenoidal skull base surgery scenario in vitro.

  8. Tubular woven narrow fabrics for replacement of cruciate ligaments.

    PubMed

    Gloy, Yves-Simon; Loehrer, M; Lang, B; Rongen, L; Gries, T; Jockenhoevel, S

    2013-09-01

    The human knee is one of the most frequently injured joints. More than half of these injuries are related to a failure of the anterior cruciate ligament. Current treatments (allogeneic and autologous) bear several disadvantages which can be overcome through the use of synthetic structures. Within the scope of this paper the potential of tubular woven fabrics for the use as artificial ligaments has been evaluated. Twelve fabrics made of polyethylene terephthalate and polytetrafluoroethylene were produced using shuttle weaving technology. Mechanical and biological properties of the fabrics were assessed using static tensile testing and cytotoxicity assays. The results obtained within this study show that woven tubular fabrics can be potentially used as artificial ligament structures as they can provide the desired medical and mechanical properties for cruciate ligament replacements. Through the choice of material and weaving parameters the fabrics' tensile properties can imitate the stress-strain characteristic of the human cruciate ligament. Further assessments in terms of cyclic loading behavior and abrasion resistance of the material are needed to evaluate the success in long term implantation.

  9. Tubular dielectric elastomer actuator for active fluidic control

    NASA Astrophysics Data System (ADS)

    McCoul, David; Pei, Qibing

    2015-10-01

    We report a novel low-profile, biomimetic dielectric elastomer tubular actuator capable of actively controlling hydraulic flow. The tubular actuator has been established as a reliable tunable valve, pinching a secondary silicone tube completely shut in the absence of a fluidic pressure bias or voltage, offering a high degree of resistance against fluidic flow, and able to open and completely remove this resistance to flow with an applied low power actuation voltage. The system demonstrates a rise in pressure of ∼3.0 kPa when the dielectric elastomer valve is in the passive, unactuated state, and there is a quadratic fall in this pressure with increasing actuation voltage, until ∼0 kPa is reached at 2.4 kV. The device is reliable for at least 2000 actuation cycles for voltages at or below 2.2 kV. Furthermore, modeling of the actuator and fluidic system yields results consistent with the observed experimental dependence of intrasystem pressure on input flow rate, actuator prestretch, and actuation voltage. To our knowledge, this is the first actuator of its type that can control fluid flow by directly actuating the walls of a tube. Potential applications may include an implantable artificial sphincter, part of a peristaltic pump, or a computerized valve for fluidic or pneumatic control.

  10. Tubular bamboo charcoal for anode in microbial fuel cells

    NASA Astrophysics Data System (ADS)

    Zhang, Jun; Li, Jun; Ye, Dingding; Zhu, Xun; Liao, Qiang; Zhang, Biao

    2014-12-01

    The anode material plays a significant role in determining the performance of microbial fuel cells (MFCs). In this study, the bamboo charcoal tube is proposed as a novel anode substrate by carbonizing the natural bamboo. Its surface functional groups, biocompatibility and internal resistance are thoroughly investigated. Performance of the MFCs with a conventional graphite tube anode and a bamboo charcoal tube anode is also compared. The results indicate that the tubular bamboo charcoal anode exhibits advantages over the graphite tube anode in terms of rougher surface, superior biocompatibility and smaller total internal resistance. Moreover, the X-ray photoelectron spectroscopy (XPS) analysis for the bamboo charcoal reveals that the introduced C-N bonds facilitate the electron transfer between the biofilm and electrodes. As a result, the MFC with a bamboo charcoal tube anode achieves a 50% improvement in the maximum power density over the graphite tube case. Furthermore, scale-up of the bamboo charcoal tube anode is demonstrated by employing a bundle of tubular bamboo charcoal to reach higher power output.

  11. Negative Stains Containing Trehalose: Application to Tubular and Filamentous Structures

    NASA Astrophysics Data System (ADS)

    Harris, J. Robin; Gerber, Max; Gebauer, Wolfgang; Wernicke, Wolfgang; Markl, Jürgen

    1996-02-01

    Several examples are presented that show the successful application of uranyl acetate and ammonium molybdate negative staining in the presence of trehalose for TEM studies of filamentous and tubular structures. The principal benefit to be gained from the inclusion of trehalose stems from the considerably reduced flattening of the large tubular structures and the greater orientational freedom of single molecules due to an increased depth of the negative stain in the presence of trehalose. Trehalose is likely to provide considerable protection to protein molecules and their assemblies during the drying of negatively stained specimens. Some reduction in the excessive density imparted by uranyl acetate around large assemblies is also achieved. Nevertheless, in the presence of 1% (w/v) trehalose, it is desirable to increase the concentration of negative stain to 5% (w/v) for ammonium molybdate and to 4% for uranyl acetate to produce satisfactory image contrast. In general, the ammonium molybdate-trehalose negative stain is more satisfactory than the uranyl acetate-trehalose combination, because of the greater electron beam sensitivity of the uranyl negative stain. Reassembled taxol-stabilized pig brain microtubules, together with collagen fibrils, sperm tails, helical filaments, and reassociated hemocyanin (KLH2), all from the giant keyhole limpet Megathura crenulata, have been studied by negative staining in the presence of trehalose. In all cases satisfactory TEM imaging conditions were readily obtained on the specimens, as long as regions of excessively deep stain were avoided.

  12. Impregnation of tubular self-assemblies into dextran hydrogels.

    PubMed

    Sun, Guoming; Chu, Chih-Chang

    2010-02-16

    Amine groups are the building units of proteins. The incorporation of amine groups into polyethylene glycol diacrylate (PEGDA) hydrogel through dextran-allyl isocyanate-ethylamine (Dex-AE) enhances sustained protein release by introducing effective interactions. To investigate such an interaction effect and to improve protein release, we impregnated self-assembled tubular structures from dextran-bromoethylamine (Dex-BH) and dextran-chloroacetic acid (Dex-CA) into Dex-AE/PEGDA hydrogel. The morphology data obtained from scanning electron microscopy (SEM) reveal that pure PEGDA hydrogel had no effect on the distribution of the self-assembled tubules; the introduction of Dex-AE brought about the dispersion of these tubules, and an increase in Dex-AE content led to more evenly distributed structures. Moreover, the implantation of the self-assembled tubules had no distinct effect on the swelling capacity of the hybrid self-assembly embedded hydrogels. The in vitro albumin release study was carried out in a pH 7.4 buffer solution; the results show that the implantation of the self-assembly into the hydrogels reduced the burst release and prolonged the protein release time. These findings demonstrate that the impregnation of tubular self-assembly into hydrogel makes the hybrid hydrogel an excellent protein delivery system.

  13. Intraductal tubular neoplasms of the pancreas: an overview.

    PubMed

    Chelliah, Adeline; Kalimuthu, Sangeetha; Chetty, Runjan

    2016-10-01

    Intraductal lesions of the pancreas are an uncommon but increasingly recognized group of entities mainly because of advances in imaging technology. In the past, precise categorization and understanding of true pancreatic intraduct neoplasms were hampered not only by their relative rarity but also because of the plethora of terminology and criteria used in nomenclature and diagnosis. Although significant progress has been made in the characterization of some of these lesions, as exemplified by intraductal papillary mucinous neoplasms, understanding of the rare intraductal tubular adenoma (ITA) and intraduct tubular carcinoma (ITC) continues to evolve. By definition, these are a group of intraductal, radiologically detectable neoplasms that can progress to or be associated with invasive adenocarcinoma and, as such, are precursor lesions to pancreatic ductal adenocarcinoma. Their often shared clinical and radiological features make precise histological diagnosis essential for appropriate management and optimal outcome. We provide an overview of these neoplasms and highlight recent developments in the understanding of ITA and ITC which have led to ITA being considered a variant of gastric-type intraductal papillary mucinous neoplasms and ITC being encompassed within the intraductal tubulopapillary neoplasm category. We also emphasize the distinguishing histological features to aid diagnosis of these rare lesions.

  14. Helical DNA origami tubular structures with various sizes and arrangements.

    PubMed

    Endo, Masayuki; Yamamoto, Seigi; Emura, Tomoko; Hidaka, Kumi; Morone, Nobuhiro; Heuser, John E; Sugiyama, Hiroshi

    2014-07-14

    We developed a novel method to design various helical tubular structures using the DNA origami method. The size-controlled tubular structures which have 192, 256, and 320 base pairs for one turn of the tube were designed and prepared. We observed the formation of the expected short tubes and unexpected long ones. Detailed analyses of the surface patterns of the tubes showed that the short tubes had mainly a left-handed helical structure. The long tubes mainly formed a right-handed helical structure and extended to the directions of the double helical axes as structural isomers of the short tubes. The folding pathways of the tubes were estimated by analyzing the proportions of short and long tubes obtained at different annealing conditions. Depending on the number of base pairs involved in one turn of the tube, the population of left-/right-handed and short/long tubes changed. The bending stress caused by the stiffness of the bundled double helices and the non-natural helical pitch determine the structural variety of the tubes. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Dynamic modeling of temperature change in outdoor operated tubular photobioreactors.

    PubMed

    Androga, Dominic Deo; Uyar, Basar; Koku, Harun; Eroglu, Inci

    2017-04-06

    In this study, a one-dimensional transient model was developed to analyze the temperature variation of tubular photobioreactors operated outdoors and the validity of the model was tested by comparing the predictions of the model with the experimental data. The model included the effects of convection and radiative heat exchange on the reactor temperature throughout the day. The temperatures in the reactors increased with increasing solar radiation and air temperatures, and the predicted reactor temperatures corresponded well to the measured experimental values. The heat transferred to the reactor was mainly through radiation: the radiative heat absorbed by the reactor medium, ground radiation, air radiation, and solar (direct and diffuse) radiation, while heat loss was mainly through the heat transfer to the cooling water and forced convection. The amount of heat transferred by reflected radiation and metabolic activities of the bacteria and pump work was negligible. Counter-current cooling was more effective in controlling reactor temperature than co-current cooling. The model developed identifies major heat transfer mechanisms in outdoor operated tubular photobioreactors, and accurately predicts temperature changes in these systems. This is useful in determining cooling duty under transient conditions and scaling up photobioreactors. The photobioreactor design and the thermal modeling were carried out and experimental results obtained for the case study of photofermentative hydrogen production by Rhodobacter capsulatus, but the approach is applicable to photobiological systems that are to be operated under outdoor conditions with significant cooling demands.

  16. Are Urinary Tubular Injury Markers Useful in Chronic Kidney Disease? A Systematic Review and Meta Analysis

    PubMed Central

    Zhou, Le-Ting; Lv, Lin-Li; Pan, Ming-Ming; Cao, Yu-Han; Liu, Hong; Feng, Ye; Ni, Hai-Feng; Liu, Bi-Cheng

    2016-01-01

    Background Adverse outcome of chronic kidney disease, such as end stage renal disease, is a significant burden on personal health and healthcare costs. Urinary tubular injury markers, such as NGAL, KIM-1 and NAG, could provide useful prognostic value for the early identification of high-risk patients. However, discrepancies between recent large prospective studies have resulted in controversy regarding the potential clinical value of these markers. Therefore, we conducted the first meta-analysis to provide a more persuasive argument to this debate. Methods In the current meta-analysis, based on ten prospective studies involving 29366 participants, we evaluated the role of urinary tubular injury markers (NGAL, KIM-1 and NAG) in predicting clinical outcomes including CKD stage 3, end stage renal disease and mortality. The prognostic values of these biomarkers were estimated using relative risks and 95% confidence interval in adjusted models. All risk estimates were normalized to those of 1 standard deviation increase in log-scale concentrations to minimize heterogeneity. Fixed-effects models were adopted to combine risk estimates. The quality of the research and between-study heterogeneity were evaluated. The level of research evidence was identified according to the GRADE profiler. Results uNGAL was identified as an independent risk predictor of ESRD (pooled adjusted relative risk: 1.40[1.21 to 1.61], p<0.001) and of overall mortality (pooled adjusted relative risk: 1.10[1.03 to 1.18], p = 0.001) in patients with chronic kidney disease. A borderline significance of uKIM-1 in predicting CKD stage 3 independently in the community-based population was observed (pooled adjusted relative risk: 1.13[1.00 to 1.27], p = 0.057). Only the prognostic value of uNGAL for ESRD was supported by a grade B level of evidence. Conclusion The concentration of uNGAL can be used in practice as an independent predictor of end stage renal disease among patients with chronic kidney disease

  17. Performance of Serum Creatinine and Kidney Injury Biomarkers for Diagnosing Histologic Acute Tubular Injury.

    PubMed

    Moledina, Dennis G; Hall, Isaac E; Thiessen-Philbrook, Heather; Reese, Peter P; Weng, Francis L; Schröppel, Bernd; Doshi, Mona D; Wilson, F Perry; Coca, Steven G; Parikh, Chirag R

    2017-08-23

    The diagnosis of acute kidney injury (AKI), which is currently defined as an increase in serum creatinine (Scr) concentration, provides little information on the condition's actual cause. To improve phenotyping of AKI, many urinary biomarkers of tubular injury are being investigated. Because AKI cases are not frequently biopsied, the diagnostic accuracy of concentrations of Scr and urinary biomarkers for histologic acute tubular injury is unknown. Cross-sectional analysis from multicenter prospective cohort. Hospitalized deceased kidney donors on whom kidney biopsies were performed at the time of organ procurement for histologic evaluation. (1) AKI diagnosed by change in Scr concentration during donor hospitalization and (2) concentrations of urinary biomarkers (neutrophil gelatinase-associated lipocalin [NGAL], liver-type fatty acid-binding protein [L-FABP], interleukin 18 [IL-18], and kidney injury molecule 1 [KIM-1]) measured at organ procurement. Histologic acute tubular injury. Of 581 donors, 98 (17%) had mild acute tubular injury and 57 (10%) had severe acute tubular injury. Overall, Scr-based AKI had poor diagnostic performance for identifying histologic acute tubular injury and 49% of donors with severe acute tubular injury did not have AKI. The area under the receiver operating characteristic curve (AUROC) of change in Scr concentration for diagnosing severe acute tubular injury was 0.58 (95% CI, 0.49-0.67) and for any acute tubular injury was 0.52 (95% CI, 0.45-0.58). Compared with Scr concentration, NGAL concentration demonstrated higher AUROC for diagnosing both severe acute tubular injury (0.67; 95% CI, 0.60-0.74; P=0.03) and any acute tubular injury (0.60; 95% CI, 0.55-0.66; P=0.005). In donors who did not have Scr-based AKI, NGAL concentrations were higher with increasing severities of acute tubular injury (subclinical AKI). However, compared with Scr concentration, AUROCs for acute tubular injury diagnosis were not significantly higher for urinary L

  18. Fixed drug eruption to sitagliptin.

    PubMed

    Gupta, Mrinal; Gupta, Anish

    2015-01-01

    Fixed drug eruption is a common adverse effect seen with various drugs notably antibiotics, antiepileptics and non-steroidal anti-inflammatory drugs. Herein we report a case of Sitagliptin induced fixed drug eruption in a 46 year old female who developed circumscribed, erythematous macules all over the body within one week of initiation of Sitagliptin. The lesions resolved with residual hyperpigmentation on cessation of the drug. The diagnosis was confirmed by an oral provocation test which led to a reactivation of the lesions. To the best of our knowledge, this is the first case of fixed drug eruption to Sitagliptin reported in the literature.

  19. Fixed drug eruption to propofol.

    PubMed

    Allchurch, L G V; Crilly, H

    2014-11-01

    We present a case of fixed drug eruption to propofol following a series of sedations of a patient for a number of day case procedures. The patient experienced oedema and blistering of his penis, increasing in severity and duration following each subsequent exposure. The diagnosis was confirmed by punch biopsy following an intravenous challenge test with propofol. Whilst reports of fixed drug eruptions to anaesthetic induction agents are uncommon, a number of drugs used commonly by anaesthetists are known triggers. We discuss fixed drug eruptions in relation to anaesthetic practice, aiming to raise awareness of this adverse drug reaction.

  20. Fixed exanthema from systemic tobramycin.

    PubMed

    García-Rubio, I; Martínez-Cócera, C; Robledo Echarren, T; Vázquez Cortés, S

    2006-01-01

    Eye drops contain several ophthalmic medications which can produce allergic reactions. We report the case of a patient with contact dermatitis from neomycin and a probable fixed exanthema after parenteral administration of tobramycin who tolerated topical tobramycin and other aminoglycosides.

  1. Fixed field circular accelerator designs

    SciTech Connect

    Johnstone, C.; Wan, W.; Garren, A.

    2000-01-06

    The rapid rate and cycle time required to efficiently accelerate muons precludes conventional circular accelerators. Recirculating linacs provide one option, but the separate return arcs per acceleration pass may prove costly. Recent work on muon acceleration schemes has concentrated on designing fixed-field circular accelerators whose strong superconducting fields can sustain a factor of 4 increase in energy from injection to extraction. A 4 to 16 GeV fixed-field circular accelerator has been designed which allows large orbit excursions and the tune to vary as a function of momentum. Acceleration is .6 GeV per turn so the entire cycle consists of only 20 turns. In addition, a 16 to 64 GeV fixed-field circular accelerator has been designed which is more in keeping with the traditional Fixed Field Alternating Gradient machines. In this work the two machine designs are described.

  2. Tubular Carcinoma of the Breast: Advantages and Limitations of Breast Tomosynthesis

    PubMed Central

    Rocha, Ana; Reis, Alcinda

    2016-01-01

    Tubular carcinoma of the breast is a rare variant of invasive ductal carcinoma. We report a case of 42-year-old asymptomatic female with a histopathological proven multifocal tubular carcinoma, studied by mammography, Tomosynthesis, Ultrasound, and Magnetic Resonance. Herein, we discuss the advantages and limitations of Tomosynthesis, an emerging imaging technique, in this particular case. PMID:28116205

  3. Responses of proximal tubular cells to injury in congenital renal disease: fight or flight.

    PubMed

    Chevalier, Robert L; Forbes, Michael S; Galarreta, Carolina I; Thornhill, Barbara A

    2014-04-01

    Most chronic kidney disease in children results from congenital or inherited disorders, which can be studied in mouse models. Following 2 weeks of unilateral ureteral obstruction (UUO) in the adult mouse, nephron loss is due to proximal tubular mitochondrial injury and cell death. In neonatal mice, proximal tubular cell death is delayed beyond 2 weeks of complete UUO, and release of partial UUO allows remodeling of remaining nephrons. Progressive cyst expansion develops in polycystic kidney disease (PKD), a common inherited renal disorder. The polycystic kidney and fibrosis (pcy)-mutant mouse (which develops late-onset PKD) develops thinning of the glomerulotubular junction in parallel with growth of cysts in adulthood. Renal insufficiency in nephropathic cystinosis, a rare inherited renal disorder, results from progressive tubular cystine accumulation. In the Ctns knockout mouse (a model of cystinosis), proximal tubular cells become flattened, with loss of mitochondria and thickening of tubular basement membrane. In each model, persistent obstructive or metabolic stress leads ultimately to the formation of atubular glomeruli. The initial "fight" response (proximal tubular survival) switches to a "flight" response (proximal tubular cell death) with ongoing oxidative injury and mitochondrial damage. Therapies should be directed at reducing proximal tubular mitochondrial oxidative injury to enhance repair and regeneration.

  4. 78 FR 77420 - Certain Oil Country Tubular Goods From the Republic of Turkey: Preliminary Negative...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-23

    ... International Trade Administration Certain Oil Country Tubular Goods From the Republic of Turkey: Preliminary... tubular goods (OCTG) from the Republic of Turkey (Turkey). The period of investigation is January 1, 2012... Turkey and several other countries.\\1\\ The CVD investigation and the AD investigations cover the same...

  5. Responses of Proximal Tubular Cells to Injury in Congenital Renal Disease: Fight or Flight

    PubMed Central

    Chevalier, Robert L.; Forbes, Michael S.; Galarreta, Carolina I.; Thornhill, Barbara A.

    2013-01-01

    Most chronic kidney disease in children results from congenital or inherited disorders, which can be studied in mouse models. Following 2 weeks of unilateral ureteral obstruction (UUO) in the adult mouse, nephron loss is due to proximal tubular mitochondrial injury and cell death. In neonatal mice, proximal tubular cell death is delayed beyond 2 weeks of complete UUO, and release of partial UUO allows remodeling of remaining nephrons. Progressive cyst expansion develops in polycystic kidney disease (PKD), a common inherited renal disorder. The PCY mutant mouse (which develops late-onset PKD) develops thinning of the glomerulotubular junction in parallel with growth of cysts in adulthood. Renal insufficiency in nephropathic cystinosis, a rare inherited renal disorder, results from progressive tubular cystine accumulation. In the Ctns knock out mouse (a model of cystinosis), proximal tubular cells become flattened, with loss of mitochondria and thickening of tubular basement membrane. In each model, persistent obstructive or metabolic stress leads ultimately to the formation of atubular glomeruli. The initial “fight” response (proximal tubular survival) switches to a “flight” response (proximal tubular cell death) with ongoing oxidative injury and mitochondrial damage. Therapies should be directed at reducing proximal tubular mitochondrial oxidative injury to enhance repair and regeneration. PMID:23949631

  6. Fixed prosthodontics: avoiding pulp death.

    PubMed

    1995-11-01

    Fixed prostheses & crowns have become a major part of dental services due to aging population & increase in retention of natural teeth. In some practices, alarming numbers of endodontic procedures are necessary because of pulp damage after prosthesis cementation. Third party payment companies show many teeth receiving crowns require endodontic therapy within 5 years. Following report describes: (1) 14 potential causes of endodontic need related to fixed prosthodontics; & (2) state-of-art concepts to prevent pulp damage.

  7. Teleteach Expanded Delivery System: Evaluation.

    ERIC Educational Resources Information Center

    Christopher, G. Ronald; Milam, Alvin L.

    In order to meet the demand for Air Force Institute of Technology (AFIT) professional continuing education (PCE) courses within the School of Systems and Logistics and the School of Engineering, the Teleteach Expanded Delivery System (TEDS) for instruction of Air Force personnel at remote locations was developed and evaluated. TEDS uses a device…

  8. Expanding the eukaryotic genetic code

    SciTech Connect

    Chin, Jason W; Cropp, T. Ashton; Anderson, J. Christopher; Schultz, Peter G

    2015-02-03

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  9. Expanding the eukaryotic genetic code

    DOEpatents

    Chin, Jason W.; Cropp, T. Ashton; Anderson, J. Christopher; Schultz, Peter G.

    2017-02-28

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  10. Expanding Frontiers of Humanoid Robotics

    DTIC Science & Technology

    2000-08-01

    From the IEEE Intelligent Systems Special Issue on Humanoid Robotics , July/August 2000 GUEST EDITORS’ Expanding Frontiers of Humanoid Robotics ...Mark L. Swinson, DARPA David J. Bruemmer, Strategic Analysis Mobile robots pose a unique set of challenges to artificial intelligence researchers...the constraints of logical correctness but also some assortment of crosscutting, physical constraints. Particularly interesting among these robots

  11. Common Ground: Expanding Our Horizons.

    ERIC Educational Resources Information Center

    McDevitt, Michele J.

    In "Common Ground: Dialogue, Understanding, and the Teaching of Composition," Kurt Spellmeyer seeks to familiarize students and teachers with the linguistic and cultural no-man's-land separating them. Reinstating the value of two writing conventions often used by traditional students--expressive and commonplaces--can help expand on the…

  12. Expanding the eukaryotic genetic code

    SciTech Connect

    Chin, Jason W; Cropp, T Ashton; Anderson, J Christopher; Schultz, Peter G

    2012-05-08

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  13. Expanding the eukaryotic genetic code

    SciTech Connect

    Chin, Jason W.; Cropp, T. Ashton; Anderson, J. Christopher; Schultz, Peter G.

    2013-01-22

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  14. Expanding the eukaryotic genetic code

    SciTech Connect

    Chin, Jason W; Cropp, T Ashton; Anderson, J Christopher; Schultz, Peter G

    2012-02-14

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  15. Expanding the eukaryotic genetic code

    SciTech Connect

    Chin, Jason W.; Cropp, T. Ashton; Anderson, J. Christopher; Schultz, Peter G.

    2010-09-14

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  16. Expanding the eukaryotic genetic code

    SciTech Connect

    Chin, Jason W.; Cropp, T. Ashton; Anderson, J. Christopher; Schultz, Peter G.

    2009-12-01

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  17. Expanding the eukaryotic genetic code

    SciTech Connect

    Chin, Jason W; Cropp, T Ashton; Anderson, J Christopher; Schultz, Peter G

    2009-10-27

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  18. Expanding the eukaryotic genetic code

    SciTech Connect

    Chin, Jason W.; Cropp, T. Ashton; Anderson, J. Christopher; Schultz, Peter G.

    2009-11-17

    This invention provides compositions and methods for producing translational components that expand the number of genetically encoded amino acids in eukaryotic cells. The components include orthogonal tRNAs, orthogonal aminoacyl-tRNA synthetases, orthogonal pairs of tRNAs/synthetases and unnatural amino acids. Proteins and methods of producing proteins with unnatural amino acids in eukaryotic cells are also provided.

  19. Expanding the Universe of Education.

    ERIC Educational Resources Information Center

    Parsons, Elizabeth

    1996-01-01

    Definitions of "education" and "rural" are debunked and expanded. The three major tasks of rural education are educating people to understand their own needs, the unavoidable changes that will transform rural Australia within their lifetimes, and the range of technologies that can enhance their well-being. Presents a strategy…

  20. Emotional Giftedness: An Expanded View.

    ERIC Educational Resources Information Center

    Piechowski, Michael M.

    This paper discusses an expanded definition of the concept of emotional giftedness in children as defined by Annemarie Roeper. In contrast to examples of academic and artistic prodigies, cases are reviewed that illustrate less tangibly measured examples of children's giftedness, such as expressions of compassion, moral sensitivity, positive…

  1. Tree Decay - An Expanded Concept

    Treesearch

    Alex L. Shigo

    1979-01-01

    The purpose of this publication is to clarify further the tree decay concept that expands the classical concept to include the orderly response of the tree to wounding and infection-compartmentalization-and the orderly infection of wounds by many microorganisms-successions. The heartrot concept must be abandoned because it deals only with decay-causing fungi and it...

  2. Tree decay an expanded concept

    Treesearch

    Alex L. Shigo

    1979-01-01

    This publication is the final one in a series on tree decay developed in cooperation with Harold G. Marx, Research Application Staff Assistant, U.S. Department of Agriculture, Forest Service, Washington, D.C. The purpose of this publication is to clarify further the tree decay concept that expands the classical concept to include the orderly response of the tree to...

  3. The Expanding Frontier of Pluralism.

    ERIC Educational Resources Information Center

    King, Edmund

    1983-01-01

    Looks at the expanding frontier of pluralism in terms of reappraising the relationship of formal education to the advent of the constant change (occupational and social) accelerated by the microprocessor revolution and readjusting provisions in educational systems to meet the different needs of different populations. (AH)

  4. Expandable Shelter/Container Report.

    DTIC Science & Technology

    1973-06-01

    without removing whatever payload might be in the contai ner. Equ i pment located in the expanded porti on of the ES/C durin g norma l operat i ons is...and Supply BattalIon , Div isi on Support Coianand. In addition , divisional avIation battalions have an A Irc raft Maintenance Company. The TOE

  5. Expanded civil judicial referral procedures

    SciTech Connect

    Not Available

    1986-08-28

    The directive provides guidance on procedures for civil judicial referrals to the Department of Justice. The memorandum expands the current direct referral program, indicates that Headquarters should not establish mandatory requirements for pre-referral negotiations, mandates use of hold action cases only for strategic or tactical reasons and offers guidance on the preparation of bankruptcy cases.

  6. Finite simple groups as expanders

    PubMed Central

    Kassabov, Martin; Lubotzky, Alexander; Nikolov, Nikolay

    2006-01-01

    We prove that there exist k ∈ ℕ and 0 < ε ∈ ℝ such that every non-abelian finite simple group G, which is not a Suzuki group, has a set of k generators for which the Cayley graph Cay(G; S) is an ε-expander. PMID:16601101

  7. Dysfunctional tubular endoplasmic reticulum constitutes a pathological feature of Alzheimer's disease.

    PubMed

    Sharoar, M G; Shi, Q; Ge, Y; He, W; Hu, X; Perry, G; Zhu, X; Yan, R

    2016-09-01

    Pathological features in Alzheimer's brains include mitochondrial dysfunction and dystrophic neurites (DNs) in areas surrounding amyloid plaques. Using a mouse model that overexpresses reticulon 3 (RTN3) and spontaneously develops age-dependent hippocampal DNs, here we report that DNs contain both RTN3 and REEPs, topologically similar proteins that can shape tubular endoplasmic reticulum (ER). Importantly, ultrastructural examinations of such DNs revealed gradual accumulation of tubular ER in axonal termini, and such abnormal tubular ER inclusion is found in areas surrounding amyloid plaques in biopsy samples from Alzheimer's disease (AD) brains. Functionally, abnormally clustered tubular ER induces enhanced mitochondrial fission in the early stages of DN formation and eventual mitochondrial degeneration at later stages. Furthermore, such DNs are abrogated when RTN3 is ablated in aging and AD mouse models. Hence, abnormally clustered tubular ER can be pathogenic in brain regions: disrupting mitochondrial integrity, inducing DNs formation and impairing cognitive function in AD and aging brains.

  8. Differential regulation of fixN-reiterated genes in Rhizobium etli by a novel fixL-fixK cascade.

    PubMed

    Girard, L; Brom, S; Dávalos, A; López, O; Soberón, M; Romero, D

    2000-12-01

    Among the complexities in the regulation of nitrogen fixation in the Rhizobiaceae are reiteration of regulatory components as well as variant roles for each component between species. For Rhizobium etli CFN42, we reported that the symbiotic plasmid (pCFN42d) contains a key regulatory gene (fixKd) and genes for a symbiotic cytochrome oxidase (fixNOQPd). Here we discuss the occurrence of reiteration of these genes (fixKf and fixNOQPf) and the finding of an unusual fixL homolog on a plasmid previously considered cryptic (pCFN42f). The structure of the deduced FixL polypeptide is suggestive of a fusion of the receiver and transmitter modules of a two-component regulatory system as described in R. leguminosarum bv. viciae VF39. Gene fusion analysis, coupled with mutation of each regulatory element, revealed that free-living expression of FixKf was dependent fully on FixL. In contrast, synthesis of FixKd was not detected under the conditions tested. The FixKf protein is needed for microaerobic expression of both fixN reiterations, whereas the FixKd protein appears to be dispensable. Interestingly, expression of the fixN reiterations exhibits a differential dependence for FixL, where transcription of fixNf was suppressed in the absence of FixL but expression of fixNd still showed significant levels. This suggests the existence of a FixL-independent mechanism for expression of the fixNd reiteration. Surprisingly, mutations in fixL, fixKd, or fixKf (either singly or in combination) did not alter symbiotic effectiveness. A mutation in fixNd (but not in fixNf) was, however, severely affected, indicating a differential role for these reiterations in nitrogen fixation.

  9. MDM2 prevents spontaneous tubular epithelial cell death and acute kidney injury

    PubMed Central

    Thomasova, Dana; Ebrahim, Martrez; Fleckinger, Kristina; Li, Moying; Molnar, Jakob; Popper, Bastian; Liapis, Helen; Kotb, Ahmed M; Siegerist, Florian; Endlich, Nicole; Anders, Hans-Joachim

    2016-01-01

    Murine double minute-2 (MDM2) is an E3-ubiquitin ligase and the main negative regulator of tumor suppressor gene p53. MDM2 has also a non-redundant function as a modulator of NF-kB signaling. As such it promotes proliferation and inflammation. MDM2 is highly expressed in the unchallenged tubular epithelial cells and we hypothesized that MDM2 is necessary for their survival and homeostasis. MDM2 knockdown by siRNA or by genetic depletion resulted in demise of tubular cells in vitro. This phenotype was completely rescued by concomitant knockdown of p53, thus suggesting p53 dependency. In vivo experiments in the zebrafish model demonstrated that the tubulus cells of the larvae undergo cell death after the knockdown of mdm2. Doxycycline-induced deletion of MDM2 in tubular cell-specific MDM2-knockout mice Pax8rtTa-cre; MDM2f/f caused acute kidney injury with increased plasma creatinine and blood urea nitrogen and sharp decline of glomerular filtration rate. Histological analysis showed massive swelling of renal tubular cells and later their loss and extensive tubular dilation, markedly in proximal tubules. Ultrastructural changes of tubular epithelial cells included swelling of the cytoplasm and mitochondria with the loss of cristae and their transformation in the vacuoles. The pathological phenotype of the tubular cell-specific MDM2-knockout mouse model was completely rescued by co-deletion of p53. Tubular epithelium compensates only partially for the cell loss caused by MDM2 depletion by proliferation of surviving tubular cells, with incomplete MDM2 deletion, but rather mesenchymal healing occurs. We conclude that MDM2 is a non-redundant survival factor for proximal tubular cells by protecting them from spontaneous p53 overexpression-related cell death. PMID:27882940

  10. Mass and heat transfer model of Tubular Solar Still

    SciTech Connect

    Ahsan, Amimul; Fukuhara, Teruyuki

    2010-07-15

    In this paper, a new mass and heat transfer model of a Tubular Solar Still (TSS) was proposed incorporating various mass and heat transfer coefficients taking account of the humid air properties inside the still. The heat balance of the humid air and the mass balance of the water vapor in the humid air were formulized for the first time. As a result, the proposed model enabled to calculate the diurnal variations of the temperature, water vapor density and relative humidity of the humid air, and to predict the hourly condensation flux besides the temperatures of the water, cover and trough, and the hourly evaporation flux. The validity of the proposed model was verified using the field experimental results carried out in Fukui, Japan and Muscat, Oman in 2008. The diurnal variations of the calculated temperatures and water vapor densities had a good agreement with the observed ones. Furthermore, the proposed model can predict the daily and hourly production flux precisely. (author)

  11. [Renal tubular acidosis with severe hypokalemic tetraparesis after ibuprofen intake].

    PubMed

    Gaul, C; Heckmann, J G; Druschky, A; Schöcklmann, H; Neundörfer, B; Erbguth, F

    1999-04-23

    A 72-year-old woman was admitted because of severe acute tetraparesis, more marked proximally. For six months she had been taking ibuprofen, up to 4800 mg daily, for a painful ulcer of the lower leg. Biochemical tests revealed marked hypokalaemia (serum potassium 1.4 mmol/l) with a metabolic acidosis (pH 7.29). The ECG showed changes of hypokalaemia (ST-segment depression and U wave). Within two days of administering potassium and bicarbonate the pareses completely regressed. Transitorily abnormal renal functions also rapidly normalized after ibuprofen had been discontinued. The biochemical findings suggest renal tubular acidosis, type 2, most likely caused by the excess intake of ibuprofen, a drug which can cause renal dysfunctions with life-threatening electrolyte abnormalities.

  12. Clinical approach to renal tubular acidosis in adult patients.

    PubMed

    Reddy, P

    2011-03-01

    Renal tubular acidosis (RTA) is a group of disorders observed in patients with normal anion gap metabolic acidosis. There are three major forms of RTA: A proximal (type II) RTA and two types of distal RTAs (type I and type IV). Proximal (type II) RTA originates from the inability to reabsorb bicarbonate normally in the proximal tubule. Type I RTA is associated with inability to excrete the daily acid load and may present with hyperkalaemia or hypokalaemia. The most prominent abnormality in type IV RTA is hyperkalaemia caused by hypoaldosteronism. This article extensively reviews the mechanism of hydrogen ion generation from metabolism of normal diet and various forms of RTA leading to disruptions of normal acid-base handling by the kidneys.

  13. Evaluation of composite flattened tubular specimen. [fatigue tests

    NASA Technical Reports Server (NTRS)

    Liber, T.; Daniel, I. M.

    1978-01-01

    Flattened tubular specimens of graphite/epoxy, S-glass/epoxy, Kevlar-49/epoxy, and graphite/S-glass/epoxy hybrid materials were evaluated under static and cyclic uniaxial tensile loading and compared directly with flat coupon data of the same materials generated under corresponding loading conditions. Additional development for the refinement of the flattened specimen configuration and fabrication was required. Statically tested graphite/epoxy, S-glass/epoxy, and Kevlar 49/epoxy flattened tube specimens exhibit somewhat higher average strengths than their corresponding flat coupons. Flattened tube specimens of the graphite/S-glass/epoxy hybrid and the graphite/epoxy flattened tube specimens failed in parasitic modes with consequential lower strength than the corresponding flat coupons. Fatigue tested flattened tube specimens failed in parasitic modes resulting in lower fatigue strengths than the corresponding flat coupons.

  14. Guided growth by a stainless-steel tubular plate.

    PubMed

    Lin, Tung-Yi; Kao, Hsuan-Kai; Li, Wei-Chun; Yang, Wen-E; Chang, Chia-Hsieh

    2013-07-01

    Guided growth using titanium tension band plates is an advancement in the correction of angular deformity. We applied two-hole stainless-steel one-third tubular plates for the same purpose. There were 14 deformities around the knees in eight children, mean age 10.8 years at operation. The success rate was 92.9% (13/14). The average correction rate per month was 0.59° in the femur and 0.65° in the tibia. No premature physeal arrest, overcorrection, or rebound phenomenon was observed. A stainless-steel plate is a safe and effective option for guided growth surgery in countries where only stainless-steel plates are available.

  15. Scavenging energy from human motion with tubular dielectric polymer

    NASA Astrophysics Data System (ADS)

    Jean-Mistral, Claire; Basrour, Skandar

    2010-04-01

    Scavenging energy from human motion is a challenge to supply low consumption systems for sport or medical applications. A promising solution is to use electroactive polymers and especially dielectric polymers to scavenge mechanical energy during walk. In this paper, we present a tubular dielectric generator which is the first step toward an integration of these structures into textiles. For a 10cm length and under a strain of 100%, the structure is able to scavenge 1.5μJ for a poling voltage of 200V and up to 40μJ for a poling voltage of 1000V. A 30cm length structure is finally compared to our previous planar structure, and the power management module for those structures is discussed.

  16. Early onset acute tubular necrosis following single infusion of zoledronate

    PubMed Central

    Yachoui, Ralph

    2016-01-01

    Summary Zoledronate is a highly potent bisphosphonate widely used in the treatment of postmenopausal osteoporosis. We report the first occurrence of toxic acute tubular necrosis (ATN) following treatment with zoledronate in a patient with osteoporosis. A 63-year-old Caucasian female with rheumatoid arthritis on anti-immune agents received a single dose of zoledronic acid (reclast) for worsening osteoporosis. Twelve days later, she developed renal failure with a rise in serum creatinine from a baseline level of 1.1 mg/dL to 5.5 mg/dL. Renal biopsy showed toxic ATN. Zoledronate was discontinued and the patient had subsequent gradual improvement in renal function with final serum creatinine of 1.8 mg/dL at 1 month of follow up. Careful monitoring of serum creatinine and awareness of the potential nephrotoxicity may avert the development of acute renal failure in osteoporosis patients treated with this agent. PMID:27920815

  17. Microscopy-assisted interspinous tubular approach for lumbar spinal stenosis.

    PubMed

    Soriano-Sánchez, José-Antonio; Quillo-Olvera, Javier; Soriano-Solis, Sergio; Soriano-Lopez, Miroslava-Elizabeth; Covarrubias-Rosas, Claudia-Angélica; Quillo-Reséndiz, Javier; Gutiérrez-Partida, Carlos-Francisco; Rodríguez-García, Manuel

    2017-03-01

    Various minimally invasive techniques have been reported as an alternative to conventional lumbar decompression. The major advantage of these minimally invasive procedures lies in their reduction of unnecessary exposure and tissue trauma. Our objective was to describe a minimally invasive procedure for lumbar spinal stenosis decompression by enlarging the lumbar interspinous space, approaching it with a tubular retractor, and assisting with microscopy. Thoracolumbar fascia and paravertebral muscles are preserved throughout the whole procedure. Iatrogenic instability of the spine can be avoided if during the procedure both joints are just undercut in order to decompress the subarticular space. The approach described in this manuscript could be used as an alternate minimally invasive surgical procedure for the treatment of central and lateral lumbar spinal stenosis.

  18. An experimental investigation of fatigue crack growth in drillstring tubulars

    SciTech Connect

    Dale, B.A.

    1986-01-01

    Drill-string failures continue to plague the oil industry, often costing millions of dollars each year. This problem is frequently intensified with the drilling of deep deviated wellbores or ''hard rock'' drilling conditions. The drilling industry attempts to guard against these costly failures by performing periodic nondestructive inspections to remove damaged tubulars from service. This paper describes the results of full-scale fatigue crack growth tests of drill collars under rotating and bending loads. In addition, corrosion fatigue crack growth data are also presented for API drill-pipe steels in air and in three representative water-base drilling fluid environments. Based on this experimental investigation, the test data support the practical application of fatigue crack growth mechanics principles for the development of nondestructive inspection intervals to reduce drill-string failures.

  19. Microscopy-assisted interspinous tubular approach for lumbar spinal stenosis

    PubMed Central

    Soriano-Sánchez, José-Antonio; Soriano-Solis, Sergio; Soriano-Lopez, Miroslava-Elizabeth; Covarrubias-Rosas, Claudia-Angélica; Quillo-Reséndiz, Javier; Gutiérrez-Partida, Carlos-Francisco; Rodríguez-García, Manuel

    2017-01-01

    Various minimally invasive techniques have been reported as an alternative to conventional lumbar decompression. The major advantage of these minimally invasive procedures lies in their reduction of unnecessary exposure and tissue trauma. Our objective was to describe a minimally invasive procedure for lumbar spinal stenosis decompression by enlarging the lumbar interspinous space, approaching it with a tubular retractor, and assisting with microscopy. Thoracolumbar fascia and paravertebral muscles are preserved throughout the whole procedure. Iatrogenic instability of the spine can be avoided if during the procedure both joints are just undercut in order to decompress the subarticular space. The approach described in this manuscript could be used as an alternate minimally invasive surgical procedure for the treatment of central and lateral lumbar spinal stenosis. PMID:28435920

  20. [Diagnostic difficulties in a case of constricted tubular visual field].

    PubMed

    Dogaru, Oana-Mihaela; Rusu, Monica; Hâncu, Dacia; Horvath, Kárin

    2013-01-01

    In the paper below we present the clinical case of a 48 year old female with various symptoms associated with functional visual disturbance -constricted tubular visual fields, wich lasts from 6 years; the extensive clinical and paraclinical ophthalmological investigations ruled out the presence of an organic disorder. In the present, we suspect a diagnosis of hysteria, still uncertain, wich represented over time a big challenge in psychology and ophthalmology. The mechanisms and reasons for hysteria are still not clear and it could represent a fascinating research theme. The tunnel, spiral or star-shaped visual fields are specific findings in hysteria for patients who present visual disturbance. The question of whether or not a patient with hysterical visual impairment can or cannot "see" is still unresolved.

  1. Transient response of a concentric evacuated tubular solar collector

    NASA Astrophysics Data System (ADS)

    Al-Khalil, Kamel M.; Jakubowski, Gerald S.; Springman, Richard A.

    The transient and the steady state performances of an evacuated coaxial tubular solar collector were investigated. A purely implicit central finite differencing numerical technique was used to determine the time-varying temperature distributions in the collector components as well as the fluid exit temperature. Experimental indoor transient tests were conducted in which step inputs of insolation were used. Close agreeement between the experimental and the theoretical results was obtained. The computer model was found to be useful to carry out a complete parametric study. The latter showed that the fluid flow rate had the largest effect on the performance of the collector tube. Lower flow rates resulted in lower efficiencies and longer response times.

  2. Scalable Approach for Extrusion and Perfusion of Tubular, Heterotypic Biomaterials

    NASA Astrophysics Data System (ADS)

    Jeronimo, Mark David

    Soft material tubes are critical in the vasculature of mammalian tissues, forming networks of blood vessels and airways. Homogeneous and heterogeneous hydrogel tubes were extruded in a one-step process using a three layer microfluidic device. Co-axial cylindrical flow of crosslinking solutions and an alginate matrix is generated by a radial arrangement of microfluidic channels at the device's vertical extrusion outlet. The flow is confined and begins a sol-gel transition immediately as it extrudes at velocities upwards of 4 mm/s. This approach allows for predictive control over the dimensions of the rapidly formed tubular structures for outer diameters from 600 microm to 3 mm. A second microfluidic device hosts tube segments for controlled perfusion and pressurization using a reversible vacuum seal. On-chip tube deflection is observed and modeled as a measure of material compliance and circumferential elasticity. I anticipate applications of these devices for perfusion cell culture of cell-laden hydrogel tubes.

  3. Ibuprofen-related renal tubular acidosis in pregnancy

    PubMed Central

    Mallett, Andrew; Lynch, Matthew; John, George T; Healy, Helen; Lust, Karin

    2011-01-01

    Ibuprofen-related renal tubular acidosis (RTA) has not been previously described in pregnancy but its occurrence outside of pregnancy is being increasingly described. In this case, a 34-year-old woman presented in the third trimester of pregnancy with Type 1 or distal RTA related to ibuprofen and codeine abuse. It was complicated by acute on chronic renal dysfunction and hypokalemia. Delivery at 37 weeks gestation due to concerns of evolving preeclampsia resulted in the birth of a healthy neonate. RTA and hypokalemia were remediated and ibuprofen and codeine abuse ceased. Some renal dysfunction however continued. Thorough and repeated history taking as well as vigilance for this condition is suggested. PMID:27579107

  4. Expanding Fixed-Wing Aircraft Capability in US Army Aviation Operations

    DTIC Science & Technology

    2009-06-12

    and passengers utilize supplemental oxygen. The C-27J can carry 16, 350 lbs more max payload than the UH - 60L /M and 10,700 lbs more max payload than...associated with the various series of UH -60 and CH-47 helicopters, operating costs can be compared with the C-27J. The UH - 60L cost per flight hour is $2,291...1997), C-1 to C-9. 116 UH - 60L Blackhawk Utility Helicopter (Medium Lift) Mission: Provide air assault, general support, aeromedical evacuation

  5. Tubular Scaffold with Shape Recovery Effect for Cell Guide Applications

    PubMed Central

    Hossain, Kazi M. Zakir; Zhu, Chenkai; Felfel, Reda M.; Sharmin, Nusrat; Ahmed, Ifty

    2015-01-01

    Tubular scaffolds with aligned polylactic acid (PLA) fibres were fabricated for cell guide applications by immersing rolled PLA fibre mats into a polyvinyl acetate (PVAc) solution to bind the mats. The PVAc solution was also mixed with up to 30 wt % β-tricalcium phosphate (β-TCP) content. Cross-sectional images of the scaffold materials obtained via scanning electron microscopy (SEM) revealed the aligned fibre morphology along with a significant number of voids in between the bundles of fibres. The addition of β-TCP into the scaffolds played an important role in increasing the void content from 17.1% to 25.3% for the 30 wt % β-TCP loading, which was measured via micro-CT (µCT) analysis. Furthermore, µCT analyses revealed the distribution of aggregated β-TCP particles in between the various PLA fibre layers of the scaffold. The compressive modulus properties of the scaffolds increased from 66 MPa to 83 MPa and the compressive strength properties decreased from 67 MPa to 41 MPa for the 30 wt % β-TCP content scaffold. The scaffolds produced were observed to change into a soft and flexible form which demonstrated shape recovery properties after immersion in phosphate buffered saline (PBS) media at 37 °C for 24 h. The cytocompatibility studies (using MG-63 human osteosarcoma cell line) revealed preferential cell proliferation along the longitudinal direction of the fibres as compared to the control tissue culture plastic. The manufacturing process highlighted above reveals a simple process for inducing controlled cell alignment and varying porosity features within tubular scaffolds for potential tissue engineering applications. PMID:26184328

  6. On milling of thin-wall conical and tubular workpieces

    NASA Astrophysics Data System (ADS)

    Tsai, Mu-Ping; Tsai, Nan-Chyuan; Yeh, Cheng-Wei

    2016-05-01

    Thin-wall tubular-geometry workpieces have been widely applied in aircraft and medical industries. However, due to the special geometry of this kind of workpieces and induced poor machinability, the desired accuracy of machining tends to be greatly degraded, no matter what type of metal-cutting task such as milling, drilling or turning is undertaken. Though numerous research reports are available that the tool path can be planned on the basis of preset surface profile before actual milling operation is performed, it is still difficult to predict the real-time surface profile errors for peripheral milling of thin-wall tubular workpieces. Instead of relying on tool path planning, this research is focused on how to real-time formulate the appropriate applied cutting torque via feedback of spindle motor current. On the other hand, a few suitable cutting conditions which are able to prevent potential break/crack of thin-wall workpieces and enhance productivity but almost retain the same cutting quality is proposed in this research. To achieve this goal, estimated surface profile error on machined parts due to deflections caused by both tool and workpiece is studied at first. Traditionally, by adjusting cutting parameters such as feed rate or cut depth, the deflection of tool or workpiece can be expected not to exceed the specified limit. Instead, an effective feedback control loop is proposed by this work for applying real-time appropriate applied cutting torque to prevent potential break/crack of the thin-wall conical workpieces. The torque estimation approach by spindle motor current feedback and the corresponding fuzzy logic controller are employed. Compared with constant cutting torque during milling operation in tradition manner, it is observed that the time consumption of milling cycle by aid of the aforesaid fuzzy logic controller is greatly shortened while the resulted cutting accuracy upon finish of workpiece can be almost retained.

  7. Numerical Simulation of Tubular Pumping Systems with Different Regulation Methods

    NASA Astrophysics Data System (ADS)

    Zhu, Honggeng; Zhang, Rentian; Deng, Dongsheng; Feng, Xusong; Yao, Linbi

    2010-06-01

    Since the flow in tubular pumping systems is basically along axial direction and passes symmetrically through the impeller, most satisfying the basic hypotheses in the design of impeller and having higher pumping system efficiency in comparison with vertical pumping system, they are being widely applied to low-head pumping engineering. In a pumping station, the fluctuation of water levels in the sump and discharge pool is most common and at most time the pumping system runs under off-design conditions. Hence, the operation of pump has to be flexibly regulated to meet the needs of flow rates, and the selection of regulation method is as important as that of pump to reduce operation cost and achieve economic operation. In this paper, the three dimensional time-averaged Navier-Stokes equations are closed by RNG κ-ɛ turbulent model, and two tubular pumping systems with different regulation methods, equipped with the same pump model but with different designed system structures, are numerically simulated respectively to predict the pumping system performances and analyze the influence of regulation device and help designers make final decision in the selection of design schemes. The computed results indicate that the pumping system with blade-adjusting device needs longer suction box, and the increased hydraulic loss will lower the pumping system efficiency in the order of 1.5%. The pumping system with permanent magnet motor, by means of variable speed regulation, obtains higher system efficiency partly for shorter suction box and partly for different structure design. Nowadays, the varied speed regulation is realized by varied frequency device, the energy consumption of which is about 3˜4% of output power of the motor. Hence, when the efficiency of variable frequency device is considered, the total pumping system efficiency will probably be lower.

  8. Tubular Scaffold with Shape Recovery Effect for Cell Guide Applications.

    PubMed

    Hossain, Kazi M Zakir; Zhu, Chenkai; Felfel, Reda M; Sharmin, Nusrat; Ahmed, Ifty

    2015-07-10

    Tubular scaffolds with aligned polylactic acid (PLA) fibres were fabricated for cell guide applications by immersing rolled PLA fibre mats into a polyvinyl acetate (PVAc) solution to bind the mats. The PVAc solution was also mixed with up to 30 wt % β-tricalcium phosphate (β-TCP) content. Cross-sectional images of the scaffold materials obtained via scanning electron microscopy (SEM) revealed the aligned fibre morphology along with a significant number of voids in between the bundles of fibres. The addition of β-TCP into the scaffolds played an important role in increasing the void content from 17.1% to 25.3% for the 30 wt % β-TCP loading, which was measured via micro-CT (µCT) analysis. Furthermore, µCT analyses revealed the distribution of aggregated β-TCP particles in between the various PLA fibre layers of the scaffold. The compressive modulus properties of the scaffolds increased from 66 MPa to 83 MPa and the compressive strength properties decreased from 67 MPa to 41 MPa for the 30 wt % β-TCP content scaffold. The scaffolds produced were observed to change into a soft and flexible form which demonstrated shape recovery properties after immersion in phosphate buffered saline (PBS) media at 37 °C for 24 h. The cytocompatibility studies (using MG-63 human osteosarcoma cell line) revealed preferential cell proliferation along the longitudinal direction of the fibres as compared to the control tissue culture plastic. The manufacturing process highlighted above reveals a simple process for inducing controlled cell alignment and varying porosity features within tubular scaffolds for potential tissue engineering applications.

  9. 75 FR 20335 - Certain Oil Country Tubular Goods from the People's Republic of China: Final Determination of...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-04-19

    ... International Trade Administration Certain Oil Country Tubular Goods from the People's Republic of China: Final... the antidumping investigation of certain oil country tubular goods (``OCTG'') from the People's...'' section of this notice. \\1\\ See Certain Oil Country Tubular Goods From the People's Republic of...

  10. Seal-less cryogenic expander

    SciTech Connect

    Faria, L.E.; Christopher, E.H.

    1987-12-08

    In an expander for use in a split Stirling cycle refrigeration system of the type wherein a displacer moves with reciprocating motion inside an expander housing, and wherein a plunger force and a regenerator force are formed on the displacer, the plunger force cyclically varying and having a time of minimum and maximum plunger force amplitude, and the regenerator force cyclically varying and having a time of minimum and maximum regenerator force amplitude, the improvement is described comprising: (a) means for maintaining displacer forces, such that the maximum plunger force amplitude is substantially equal to the maximum regenerator force amplitude; and (b) means for adjusting a time difference, the time difference being the time between the time of maximum plunger force and the time of maximum regenerator force such that a measure of the cooling power of the refrigeration system is maximized.

  11. Helical screw expander evaluation project

    NASA Technical Reports Server (NTRS)

    Mckay, R.

    1982-01-01

    A one MW helical rotary screw expander power system for electric power generation from geothermal brine was evaluated. The technology explored in the testing is simple, potentially very efficient, and ideally suited to wellhead installations in moderate to high enthalpy, liquid dominated field. A functional one MW geothermal electric power plant that featured a helical screw expander was produced and then tested with a demonstrated average performance of approximately 45% machine efficiency over a wide range of test conditions in noncondensing, operation on two-phase geothermal fluids. The Project also produced a computer equipped data system, an instrumentation and control van, and a 1000 kW variable load bank, all integrated into a test array designed for operation at a variety of remote test sites. Data are presented for the Utah testing and for the noncondensing phases of the testing in Mexico. Test time logged was 437 hours during the Utah tests and 1101 hours during the Mexico tests.

  12. Helical screw expander evaluation project

    NASA Astrophysics Data System (ADS)

    McKay, R.

    1982-03-01

    A one MW helical rotary screw expander power system for electric power generation from geothermal brine was evaluated. The technology explored in the testing is simple, potentially very efficient, and ideally suited to wellhead installations in moderate to high enthalpy, liquid dominated field. A functional one MW geothermal electric power plant that featured a helical screw expander was produced and then tested with a demonstrated average performance of approximately 45% machine efficiency over a wide range of test conditions in noncondensing, operation on two-phase geothermal fluids. The Project also produced a computer equipped data system, an instrumentation and control van, and a 1000 kW variable load bank, all integrated into a test array designed for operation at a variety of remote test sites. Data are presented for the Utah testing and for the noncondensing phases of the testing in Mexico. Test time logged was 437 hours during the Utah tests and 1101 hours during the Mexico tests.

  13. Scale-invariant growth processes in expanding space

    NASA Astrophysics Data System (ADS)

    Ali, Adnan; Ball, Robin C.; Grosskinsky, Stefan; Somfai, Ellák

    2013-02-01

    Many growth processes lead to intriguing stochastic patterns and complex fractal structures which exhibit local scale invariance properties. Such structures can often be described effectively by space-time trajectories of interacting particles, and their large scale behavior depends on the overall growth geometry. We establish an exact relation between statistical properties of structures in uniformly expanding and fixed geometries, which preserves the local scale invariance and is independent of other properties such as the dimensionality. This relation generalizes standard conformal transformations as the natural symmetry of self-affine growth processes. We illustrate our main result numerically for various structures of coalescing Lévy flights and fractional Brownian motions, including also branching and finite particle sizes. One of the main benefits of this approach is a full, explicit description of the asymptotic statistics in expanding domains, which are often nontrivial and random due to amplification of initial fluctuations.

  14. Outflow Propagation in Collapsars: Collimated Jets And Expanding Outflows

    SciTech Connect

    Mizuta, A.; Yamasaki, T.; Nagataki, S.; Mineshige, S.; /Kyoto U., Yukawa Inst., Kyoto /KIPAC, Menlo Park

    2007-06-08

    We investigate the outflow propagation in the collapsar in the context of gamma-ray bursts (GRBs) with 2D relativistic hydrodynamic simulations. We vary the specific internal energy and bulk Lorentz factor of the injected outflow from non-relativistic regime to relativistic one, fixing the power of the outflow to be 10{sup 51}erg s{sup -1}. We observed the collimated outflow, when the Lorentz factor of the injected outflow is roughly greater than 2. To the contrary, when the velocity of the injected outflow is slower, the expanding outflow is observed. The transition from collimated jet to expanding outflow continuously occurs by decreasing the injected velocity. Different features of the dynamics of the outflows would cause the difference between the GRBs and similar phenomena, such as, X-ray flashes.

  15. Echinocandins: The Expanding Antifungal Armamentarium.

    PubMed

    Aguilar-Zapata, Daniel; Petraitiene, Ruta; Petraitis, Vidmantas

    2015-12-01

    The echinocandins are large lipopeptide molecules that, since their discovery approximately 41 years ago, have emerged as important additions to the expanding armamentarium against invasive fungal diseases. Echinocandins exert in vitro and in vivo fungicidal action against most Candida species and fungistatic action against Aspergillus species. However, the population of patients at risk for developing invasive fungal infections continues to increase. New therapeutic strategies using echinocandins are needed to improve clinical outcomes in patients with invasive fungal disease.

  16. Evidence of the big fix

    NASA Astrophysics Data System (ADS)

    Hamada, Yuta; Kawai, Hikaru; Kawana, Kiyoharu

    2014-06-01

    We give an evidence of the Big Fix. The theory of wormholes and multiverse suggests that the parameters of the Standard Model are fixed in such a way that the total entropy at the late stage of the universe is maximized, which we call the maximum entropy principle. In this paper, we discuss how it can be confirmed by the experimental data, and we show that it is indeed true for the Higgs vacuum expectation value vh. We assume that the baryon number is produced by the sphaleron process, and that the current quark masses, the gauge couplings and the Higgs self-coupling are fixed when we vary vh. It turns out that the existence of the atomic nuclei plays a crucial role to maximize the entropy. This is reminiscent of the anthropic principle, however it is required by the fundamental law in our case.

  17. Mobile versus fixed site lithotripsy.

    PubMed Central

    Lewis, C.; Burgess, N. A.; Feneley, R. C.; Matthews, P. N.

    1991-01-01

    The efficacy of a mobile Dornier HM4 lithotriptor, was compared with that of a fixed site Siemens Lithostar. A total of 115 calculi in 98 patients were treated, 55 on the mobile Dornier and 60 on the Lithostar. The groups were similar except for stone size, the mean of the Lithostar group being 11 mm compared with 7.7 mm in the Dornier group. Fragmentation rates were not significantly different, 88% and 75% on the mobile and fixed site machines, respectively and, at 3 months follow-up 66% and 46% were stone free or with fragments of less than 2 mm. There were no serious complications, and the incidence of mild complications was similar in the two groups. We conclude that the mobile Dornier HM4 is an effective lithotriptor and can offer several advantages over fixed site machines. PMID:1929134

  18. Tubular proteinuria is the dominant type of proteinuria in an elderly community population in China.

    PubMed

    Wang, Hua-Bin; Yang, Qing-Hong; Jiang, Xu; Cui, Xiao-Fan; Liu, Rui

    2015-09-01

    To explore the types of proteinuria in the elderly population in China. Seven hundred and fourteen elderly people (≥ 60 years old) from Tianjin, China, were selected for the study. The albumin-to-creatinine ratio and α1-microglobulin-to-creatinine ratio from morning urine samples were used as indicators of proteinuria. The prevalence of proteinuria was evaluated and the proportion of three different types of proteinuria (mixed, glomerular, and tubular) was assessed in the subjects by analyzing these indicators. Of the 714 subjects, 29.13 % had elevated ACR and 46.36 % had elevated MCR. The proportion of subjects with either elevated ACR or MCR was 53.78 %. The correlation between MCR and ACR was moderate (r = 0.58, R (2) = 0.34, P < 0.001). Overall, tubular proteinuria was dominant (45.83 %), followed by mixed glomerular and tubular proteinuria (35.68 %), and significantly higher than glomerular proteinuria. A diet high in salt was the independent risk factor for tubular proteinuria; physical activity was the independent risk factor for glomerular proteinuria. The risk of glomerular proteinuria was lower in males than in females, but the risk of tubular proteinuria was higher in males. The prevalence of tubular proteinuria was higher than that of glomerular proteinuria, and the risk factors are different, in the elderly in China; therefore, tubular damage markers should get more attention in the overall population.

  19. Tweak induces proliferation in renal tubular epithelium: a role in uninephrectomy induced renal hyperplasia

    PubMed Central

    Sanz, Ana B; Sanchez-Niño, Maria Dolores; Izquierdo, Maria Concepcion; Jakubowski, Aniela; Justo, Pilar; Blanco-Colio, Luis M; Ruiz-Ortega, Marta; Egido, Jesús; Ortiz, Alberto

    2009-01-01

    The tumour necrosis factor (TNF) family member TWEAK activates the Fn14 receptor and has pro-apoptotic, proliferative and pro-inflammatory actions that depend on the cell type and the microenvironment. We explored the proliferative actions of TWEAK on cultured tubular cells and in vivo on renal tubules. Additionally, we studied the role of TWEAK in compensatory proliferation following unilateral nephrectomy and in an inflammatory model of acute kidney injury (AKI) induced by a folic acid overdose. TWEAK increased the proliferation, cell number and cyclin D1 expression of cultured tubular cells, in vitro. Exposure to serum increased TWEAK and Fn14 expression and the proliferative response to TWEAK. TWEAK activated the mitogen-activated protein kinases ERK and p38, the phosphatidyl-inositol 3-kinase (PI3K)/Akt pathway and NF-κB. TWEAK-induced proliferation was prevented by inhibitors of these protein kinases and by the NF-κB inhibitor parthenolide. TWEAK-induced tubular cell proliferation as assessed by PCNA and cyclin D1 expression in the kidneys of adult healthy mice in vivo. By contrast, TWEAK knock-out mice displayed lower tubular cell proliferation in the remnant kidney following unilateral nephrectomy, a non-inflammatory model. This is consistent with TWEAK-induced proliferation on cultured tubular cells in the absence of inflammatory cytokines. Consistent with our previously published data, in the presence of inflammatory cytokines TWEAK promoted apoptosis, not proliferation, of cultured tubular cells. In this regard, TWEAK knock-out mice with AKI displayed less tubular apoptosis and proliferation, as well as improved renal function. In conclusion, TWEAK actions in tubular cells are context dependent. In a non-inflammatory milieu TWEAK induces proliferation of tubular epithelium. This may be relevant for compensatory renal hyperplasia following nephrectomy. PMID:19426154

  20. Protective effect of resin adsorption on septic plasma-induced tubular injury

    PubMed Central

    2010-01-01

    Introduction A pro-apoptotic effect of circulating mediators on renal tubular epithelial cells has been involved in the pathogenesis of sepsis-associated acute kidney injury (AKI). Adsorption techniques have been showed to efficiently remove inflammatory cytokines from plasma. The aim of this study was to evaluate the efficiency of the hydrophobic resin Amberchrom CG161 M to adsorb from septic plasma soluble mediators involved in tubular injury. Methods We enrolled in the study 10 critically ill patients with sepsis-associated AKI and we evaluated the effects of their plasma on granulocyte adhesion, apoptosis and functional alterations of cultured human kidney tubular epithelial cells. We established an in vitro model of plasma adsorption and we studied the protective effect of unselective removal of soluble mediators by the Amberchrom CG161 M resin on septic plasma-induced tubular cell injury. Results Plasma from septic patients induced granulocyte adhesion, apoptosis and altered polarity in tubular cells. Plasma adsorption significantly decreased these effects and abated the concentrations of several soluble mediators. The inhibition of granulocyte adhesion to tubular cells was associated with the down-regulation of ICAM-1 and CD40. Resin adsorption inhibited tubular cell apoptosis induced by septic plasma by down-regulating the activation of caspase-3, 8, 9 and of Fas/death receptor-mediated signalling pathways. The alteration of cell polarity, morphogenesis, protein reabsorption and the down-regulation of the tight junction molecule ZO-1, of the sodium transporter NHE3, of the glucose transporter GLUT-2 and of the endocytic receptor megalin all induced by septic plasma were significantly reduced by resin adsorption. Conclusions Septic plasma induced a direct injury of tubular cells by favouring granulocyte adhesion, by inducing cell apoptosis and by altering cell polarity and function. All these biological effects are related to the presence of circulating

  1. Kidney specific protein-positive cells derived from embryonic stem cells reproduce tubular structures in vitro and differentiate into renal tubular cells.

    PubMed

    Morizane, Ryuji; Monkawa, Toshiaki; Fujii, Shizuka; Yamaguchi, Shintaro; Homma, Koichiro; Matsuzaki, Yumi; Okano, Hideyuki; Itoh, Hiroshi

    2014-01-01

    Embryonic stem cells and induced pluripotent stem cells have the ability to differentiate into various organs and tissues, and are regarded as new tools for the elucidation of disease mechanisms as well as sources for regenerative therapies. However, a method of inducing organ-specific cells from pluripotent stem cells is urgently needed. Although many scientists have been developing methods to induce various organ-specific cells from pluripotent stem cells, renal lineage cells have yet to be induced in vitro because of the complexity of kidney structures and the diversity of kidney-component cells. Here, we describe a method of inducing renal tubular cells from mouse embryonic stem cells via the cell purification of kidney specific protein (KSP)-positive cells using an anti-KSP antibody. The global gene expression profiles of KSP-positive cells derived from ES cells exhibited characteristics similar to those of cells in the developing kidney, and KSP-positive cells had the capacity to form tubular structures resembling renal tubular cells when grown in a 3D culture in Matrigel. Moreover, our results indicated that KSP-positive cells acquired the characteristics of each segment of renal tubular cells through tubular formation when stimulated with Wnt4. This method is an important step toward kidney disease research using pluripotent stem cells, and the development of kidney regeneration therapies.

  2. Chronicity following ischaemia-reperfusion injury depends on tubular-macrophage crosstalk involving two tubular cell-derived CSF-1R activators: CSF-1 and IL-34.

    PubMed

    Sanchez-Niño, Maria Dolores; Sanz, Ana Belen; Ortiz, Alberto

    2016-09-01

    Two structurally unrelated ligands activate the macrophage colony stimulating factor receptor (CSF-1R, c-fms, CD115): M-CSF/CSF-1 and interleukin-34 (IL-34). Both ligands promote macrophage proliferation, survival and differentiation. IL-34 also activates the protein-tyrosine phosphatase ζ receptor (PTP-ζ, PTPRZ1). Both receptors and cytokines are increased during acute kidney injury. While tubular cell-derived CSF-1 is required for kidney repair, Baek et al (J Clin Invest 2015; 125: 3198-3214) have now identified tubular epithelial cell-derived IL-34 as a promoter of kidney neutrophil and macrophage infiltration and tubular cell destruction during experimental kidney ischaemia-reperfusion, leading to chronic injury. IL-34 promoted proliferation of both intrarenal macrophages and bone marrow cells, increasing circulating neutrophils and monocytes and their kidney recruitment. Thus, injured tubular cells release two CSF-1R activators, one (CSF-1) that promotes tubular cell survival and kidney repair and another (IL-34) that promotes chronic kidney damage. These results hold promise for the development of IL-34-targeting strategies to prevent ischaemia-reperfusion kidney injury in contexts such as kidney transplantation. However, careful consideration should be given to the recent characterization by Bezie et al. (J Clin Invest 2015; 125: 3952-3964) of IL-34 as a T regulatory cell (Treg) cytokine that modulates macrophage responses so that IL-34-primed macrophages potentiate the immune suppressive capacity of Tregs and promote graft tolerance.

  3. Undulating tubular liposomes through incorporation of a synthetic skin ceramide into phospholipid bilayers

    PubMed Central

    Xu, Peng; Tan, Grace; Zhou, Jia; He, Jibao; Lawson, Louise B.; McPherson, Gary L.; John, Vijay T.

    2009-01-01

    Non-spherical liposomes were prepared by doping L-α-phosphatidylcholine (PC) with ceramide VI (a skin lipid). Cryo-transmission electron microscopy shows the liposome shape changing from spherical to an undulating tubular morphology, when the amount ofceramide VI is increased. The formation of tubular liposomes is energetically favorableand is attributed to the association of ceramide VI with PC creating regions of lower curvature. Since ceramides are the major component of skin lipids inthe stratum corneum, tubular liposomes containing ceramide may potentially serve as self-enhanced nanocarriers for transdermal delivery. PMID:19694462

  4. Undulating tubular liposomes through incorporation of a synthetic skin ceramide into phospholipid bilayers.

    PubMed

    Xu, Peng; Tan, Grace; Zhou, Jia; He, Jibao; Lawson, Louise B; McPherson, Gary L; John, Vijay T

    2009-09-15

    Nonspherical liposomes were prepared by doping L-alpha-phosphatidylcholine (PC) with ceramide VI (a skin lipid). Cryo-transmission electron microscopy shows the liposome shape changing from spherical to an undulating tubular morphology, when the amount of ceramide VI is increased. The formation of tubular liposomes is energetically favorable and is attributed to the association of ceramide VI with PC creating regions of lower curvature. Since ceramides are the major component of skin lipids in the stratum corneum, tubular liposomes containing ceramide may potentially serve as self-enhanced nanocarriers for transdermal delivery.

  5. Development of ultraviolet rigidizable materials. [expandable space erectable structures

    NASA Technical Reports Server (NTRS)

    Salisbury, D. P.

    1979-01-01

    A series of tests was performed to determine an optimum resin to be used as a UV rigidizable matrix in expandable rigidizable space structures. Commercially available resins including several types of polyesters, epoxies, epoxy-acrylics, an acrylic and a urethane were used as well as a polyester, produced by 3M Company's Solar Laboratory facility, which was found the best from the standpoint of physical properties and ability to be 'B' staged. Two other synthesized materials were also tested, but were not found to be superior to the Solar resin. An optimum fabric for use with the preferred resin was not found; however, the 15 ounce fabric from Solar Laboratories has the best combination of physical properties with respect to handling and processing characteristics. Expansion techniques for tubular structures, 'B' staging of the solar resin, and stowage techniques for up to 5 months were developed. A one meter high tetrahedron preprototype structure was prepared to evaluate and demonstrate stowage, deployment, and rigidization techniques.

  6. Fixed Costs and Hours Constraints

    ERIC Educational Resources Information Center

    Johnson, William R.

    2011-01-01

    Hours constraints are typically identified by worker responses to questions asking whether they would prefer a job with more hours and more pay or fewer hours and less pay. Because jobs with different hours but the same rate of pay may be infeasible when there are fixed costs of employment or mandatory overtime premia, the constraint in those…

  7. Fixed Costs and Hours Constraints

    ERIC Educational Resources Information Center

    Johnson, William R.

    2011-01-01

    Hours constraints are typically identified by worker responses to questions asking whether they would prefer a job with more hours and more pay or fewer hours and less pay. Because jobs with different hours but the same rate of pay may be infeasible when there are fixed costs of employment or mandatory overtime premia, the constraint in those…

  8. Fixed drug eruption to tartrazine.

    PubMed

    Orchard, D C; Varigos, G A

    1997-11-01

    An 11-year-old girl with a recurrent fixed drug eruption to tartrazine on the dorsum of the left hand is presented. Oral provocation tests to both the suspected food, an artificially coloured cheese crisp, and to tartrazine were positive. This case highlights fire need to consider artificial flavours, colours and preservatives as potential culprits in classic drug eruptions.

  9. Adhesives for fixed orthodontic bands.

    PubMed

    Millett, D T; Glenny, A M; Mattick, C R; Hickman, J; Mandall, N A

    2007-04-18

    Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of:(1) how often the bands come off during treatment; and(2) whether they protect the banded teeth against decay during fixed appliance treatment. Electronic databases were searched: the Cochrane Oral Health Group's Trials Register (29th January 2007), the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library 2007, Issue 1), MEDLINE (1966 to 29th January 2007) and EMBASE (1980 to 29th January 2007). A search of the internet was also undertaken. There was no restriction with regard to publication status or language of publication. Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. All review authors were involved in study selection, validity assessment and data extraction without blinding to the authors, adhesives used or results

  10. Adhesives for fixed orthodontic bands.

    PubMed

    Millett, Declan T; Glenny, Anne-Marie; Mattick, Rye Cr; Hickman, Joy; Mandall, Nicky A

    2016-10-25

    Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of:(1) how often the bands come off during treatment; and(2) whether they protect the banded teeth against decay during fixed appliance treatment. The following electronic databases were searched: Cochrane Oral Health's Trials Register (searched 2 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 2 June 2016), MEDLINE Ovid (1946 to 2 June 2016) and EMBASE Ovid (1980 to 2 June 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. All review authors

  11. Physiological pH. Effects on posthypoxic proximal tubular injury.

    PubMed

    Zager, R A; Schimpf, B A; Gmur, D J

    1993-04-01

    After O2 deprivation, tissue acidosis rapidly self-corrects. This study assessed the effect of this pH correction on the induction, and pathways, of posthypoxic proximal tubular injury. In addition, ways to prevent the resultant injury were explored. Isolated rat proximal tubular segments (PTSs) were subjected to hypoxia/reoxygenation (50/30 or 30/50 minutes) under the following incubation conditions: 1) continuous pH 7.4, 2) continuous pH 6.8, or 3) hypoxia at pH 6.8 and reoxygenation at pH 7.4 (NaHCO3 or Tris base addition). Continuously oxygenated PTSs maintained under these same pH conditions served as controls. Lethal cell injury was assessed by lactate dehydrogenase (LDH) release. pH effects on several purported pathways of hypoxia/reoxygenation injury were also assessed (ATP depletion, lipid peroxidation, and membrane deacylation). Acidosis blocked hypoxic LDH release (pH 7.4, 50 +/- 2%; pH 6.8, 6 +/- 1%) without mitigating membrane deacylation or ATP depletion. During reoxygenation, minimal LDH was released (3-5%) if pH was held constant. However, if posthypoxic pH was corrected, immediate (< or = 5 minutes) and marked cell death (e.g., 55 +/- 3% with Tris) occurred. This was dissociated from lipid peroxidation or new deacylation, and it was preceded by a depressed ATP/ADP ratio (suggesting an acidosis-associated defect in hypoxic/posthypoxic cell energetics). Realkalinization injury was not inevitable, since it could be substantially blocked by 1) posthypoxic glycine addition, 2) transient posthypoxic hypothermia, or 3) allowing a 10-minute reoxygenation (cell recovery) period before base addition. Neither mannitol nor graded buffer Ca2+ deletion conferred protection. Acute pH correction caused no injury to continuously oxygenated PTSs. Conclusions are as follows: 1) Posthypoxic "pH shock" causes virtually immediate cell death, not by causing de novo injury but, rather, by removing the cytoprotective effect of acidosis. 2) This injury can be prevented by a

  12. 46 CFR 170.235 - Fixed ballast.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 46 Shipping 7 2011-10-01 2011-10-01 false Fixed ballast. 170.235 Section 170.235 Shipping COAST... ALL INSPECTED VESSELS Special Installations § 170.235 Fixed ballast. (a) Fixed ballast, if used, must... shifting of position. (b) Fixed ballast may not be removed from a vessel or relocated unless approved by...

  13. 46 CFR 170.235 - Fixed ballast.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 46 Shipping 7 2013-10-01 2013-10-01 false Fixed ballast. 170.235 Section 170.235 Shipping COAST... ALL INSPECTED VESSELS Special Installations § 170.235 Fixed ballast. (a) Fixed ballast, if used, must... shifting of position. (b) Fixed ballast may not be removed from a vessel or relocated unless approved by...

  14. 29 CFR 1917.120 - Fixed stairways.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 7 2014-07-01 2014-07-01 false Fixed stairways. 1917.120 Section 1917.120 Labor... (CONTINUED) MARINE TERMINALS Terminal Facilities § 1917.120 Fixed stairways. (a) Definition. “Fixed stairway... intergral part of machinery. (b) New installations. (1) Fixed stairs installed after October 3, 1983 shall...

  15. 29 CFR 1917.120 - Fixed stairways.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 7 2012-07-01 2012-07-01 false Fixed stairways. 1917.120 Section 1917.120 Labor... (CONTINUED) MARINE TERMINALS Terminal Facilities § 1917.120 Fixed stairways. (a) Definition. “Fixed stairway... intergral part of machinery. (b) New installations. (1) Fixed stairs installed after October 3, 1983 shall...

  16. 46 CFR 170.235 - Fixed ballast.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 46 Shipping 7 2012-10-01 2012-10-01 false Fixed ballast. 170.235 Section 170.235 Shipping COAST... ALL INSPECTED VESSELS Special Installations § 170.235 Fixed ballast. (a) Fixed ballast, if used, must... shifting of position. (b) Fixed ballast may not be removed from a vessel or relocated unless approved by...

  17. Shell may expand detergent alcohols

    SciTech Connect

    1996-10-23

    Shell Chemical is studying plans to expand detergent alcohols capacity in the US, CW has learned. The company is considering adding capacity for about 80 million lbs/year. If the project is approved, it would be implemented at the company`s Geismar, LA site. Shell will make a final decision on whether to proceed with the project within six months. It has been rumored to be considering a capacity addition as a result of tightening supply of natural and synthetic detergent alcohols.

  18. Advanced Expander Test Bed Engine

    DTIC Science & Technology

    1992-03-01

    performance data will be provided to NASA -LeRC for verifying the ROCETS computer model and evaluating various RLI0 modifications. 22 SECTION IV CURRENT...RL10 modeling data for the ROCETS computer program. 23 NASA Report Documentation Page Nafi~aj AfWflWuIC Wd Sow@ Ad-lvhlsto, 1 eport No. 2. Government... NASA have identified the need for a new Space Transfer Vehicle (STV) Propulsion System. The new system will be an oxygen/hydrogen expander cycle engine

  19. Unconventional microfluidics: expanding the discipline.

    PubMed

    Nawaz, Ahmad Ahsan; Mao, Xiaole; Stratton, Zackary S; Huang, Tony Jun

    2013-04-21

    Since its inception, the discipline of microfluidics has been harnessed for innovations in the biomedicine/chemistry fields-and to great effect. This success has had the natural side-effect of stereotyping microfluidics as a platform for medical diagnostics and miniaturized lab processes. But microfluidics has more to offer. And very recently, some researchers have successfully applied microfluidics to fields outside its traditional domains. In this Focus article, we highlight notable examples of such "unconventional" microfluidics applications (e.g., robotics, electronics). It is our hope that these early successes in unconventional microfluidics prompt further creativity, and inspire readers to expand the microfluidics discipline.

  20. Semigroup Actions of Expanding Maps

    NASA Astrophysics Data System (ADS)

    Carvalho, Maria; Rodrigues, Fagner B.; Varandas, Paulo

    2017-01-01

    We consider semigroups of Ruelle-expanding maps, parameterized by random walks on the free semigroup, with the aim of examining their complexity and exploring the relation between intrinsic properties of the semigroup action and the thermodynamic formalism of the associated skew-product. In particular, we clarify the connection between the topological entropy of the semigroup action and the growth rate of the periodic points, establish the main properties of the dynamical zeta function of the semigroup action and relate these notions to recent research on annealed and quenched thermodynamic formalism. Meanwhile, we examine how the choice of the random walk in the semigroup unsettles the ergodic properties of the action.

  1. Unconventional microfluidics: expanding the discipline

    PubMed Central

    Nawaz, Ahmad Ahsan; Mao, Xiaole; Stratton, Zackary S.; Huang, Tony Jun

    2014-01-01

    Since its inception, the discipline of microfluidics has been harnessed for innovations in the biomedicine/chemistry fields—and to great effect. This success has had the natural side-effect of stereotyping microfluidics as a platform for medical diagnostics and miniaturized lab processes. But microfluidics has more to offer. And very recently, some researchers have successfully applied microfluidics to fields outside its traditional domains. In this Focus article, we highlight notable examples of such “unconventional” microfluidics applications (e.g., robotics, electronics). It is our hope that these early successes in unconventional microfluidics prompt further creativity, and inspire readers to expand the microfluidics discipline. PMID:23478651

  2. Expanding the repertoire of deadenylases.

    PubMed

    Skeparnias, Ilias; Αnastasakis, Dimitrios; Shaukat, Athanasios-Nasir; Grafanaki, Katerina; Stathopoulos, Constantinos

    2017-03-07

    Deadenylases belong to an expanding family of exoribonucleases involved mainly in mRNA stability and turnover, with the exception of PARN which has additional roles in the biogenesis of several important non-coding RNAs, including miRNAs and piRNAs. Recently, PARN in C. elegans and its homolog PNLDC1 in B. mori were reported as the elusive trimmers mediating piRNA biogenesis. In addition, characterization of mammalian PNLDC1 in comparison to PARN, showed that is specifically expressed in embryonic stem and germ cells, as well as during early embryo development. Moreover, its expression is correlated with epigenetic events mediated by the de novo DNMT3b methyltransferase and knockdown in stem cells upregulates important genes that regulate multipotency. The recent data suggest that at least some new deadenylases may have expanded roles in cell metabolism as regulators of gene expression, through mRNA deadenylation, ncRNAs biogenesis and ncRNA-mediated mRNA targeting, linking essential mechanisms that regulate epigenetic control and transition events during differentiation. The possible roles of mammalian PNLDC1 along those dynamic networks are discussed in the light of new extremely important findings.

  3. Soft tubular microfluidics for 2D and 3D applications.

    PubMed

    Xi, Wang; Kong, Fang; Yeo, Joo Chuan; Yu, Longteng; Sonam, Surabhi; Dao, Ming; Gong, Xiaobo; Lim, Chwee Teck

    2017-09-18

    Microfluidics has been the key component for many applications, including biomedical devices, chemical processors, microactuators, and even wearable devices. This technology relies on soft lithography fabrication which requires cleanroom facilities. Although popular, this method is expensive and labor-intensive. Furthermore, current conventional microfluidic chips precludes reconfiguration, making reiterations in design very time-consuming and costly. To address these intrinsic drawbacks of microfabrication, we present an alternative solution for the rapid prototyping of microfluidic elements such as microtubes, valves, and pumps. In addition, we demonstrate how microtubes with channels of various lengths and cross-sections can be attached modularly into 2D and 3D microfluidic systems for functional applications. We introduce a facile method of fabricating elastomeric microtubes as the basic building blocks for microfluidic devices. These microtubes are transparent, biocompatible, highly deformable, and customizable to various sizes and cross-sectional geometries. By configuring the microtubes into deterministic geometry, we enable rapid, low-cost formation of microfluidic assemblies without compromising their precision and functionality. We demonstrate configurable 2D and 3D microfluidic systems for applications in different domains. These include microparticle sorting, microdroplet generation, biocatalytic micromotor, triboelectric sensor, and even wearable sensing. Our approach, termed soft tubular microfluidics, provides a simple, cheaper, and faster solution for users lacking proficiency and access to cleanroom facilities to design and rapidly construct microfluidic devices for their various applications and needs.

  4. Tubular Overexpression of Angiopoietin-1 Attenuates Renal Fibrosis

    PubMed Central

    Lee, Heedoo; Kim, Yeawon; Liu, Tuoen; Guo, Qiusha; Geminiani, Julio J.; Austin, Paul F.; Chen, Ying Maggie

    2016-01-01

    Emerging evidence has highlighted the pivotal role of microvasculature injury in the development and progression of renal fibrosis. Angiopoietin-1 (Ang-1) is a secreted vascular growth factor that binds to the endothelial-specific Tie2 receptor. Ang-1/Tie2 signaling is critical for regulating blood vessel development and modulating vascular response after injury, but is dispensable in mature, quiescent vessels. Although dysregulation of vascular endothelial growth factor (VEGF) signaling has been well studied in renal pathologies, much less is known about the role of the Ang-1/Tie2 pathway in renal interstitial fibrosis. Previous studies have shown contradicting effects of overexpressing Ang-1 systemically on renal tubulointerstitial fibrosis when different engineered forms of Ang-1 are used. Here, we investigated the impact of site-directed expression of native Ang-1 on the renal fibrogenic process and peritubular capillary network by exploiting a conditional transgenic mouse system [Pax8-rtTA/(TetO)7 Ang-1] that allows increased tubular Ang-1 production in adult mice. Using a murine unilateral ureteral obstruction (UUO) fibrosis model, we demonstrate that targeted Ang-1 overexpression attenuates myofibroblast activation and interstitial collagen I accumulation, inhibits the upregulation of transforming growth factor β1 and subsequent phosphorylation of Smad 2/3, dampens renal inflammation, and stimulates the growth of peritubular capillaries in the obstructed kidney. Our results suggest that Ang-1 is a potential therapeutic agent for targeting microvasculature injury in renal fibrosis without compromising the physiologically normal vasculature in humans. PMID:27454431

  5. Macroscopic, freestanding, and tubular graphene architectures fabricated via thermal annealing.

    PubMed

    Nguyen, Duc Dung; Suzuki, Seiya; Kato, Shuji; To, Bao Dong; Hsu, Chia Chen; Murata, Hidekazu; Rokuta, Eiji; Tai, Nyan-Hwa; Yoshimura, Masamichi

    2015-03-24

    Manipulation of individual graphene sheets/films into specific architectures at macroscopic scales is crucially important for practical uses of graphene. We present herein a versatile and robust method based on annealing of solid carbon precursors on nickel templates and thermo-assisted removal of poly(methyl methacrylate) under low vacuum of ∼0.6 Pa for fabrication of macroscopic, freestanding, and tubular graphene (TG) architectures. Specifically, the TG architectures can be obtained as individual and woven tubes with a diameter of ∼50 μm, a wall thickness in the range of 2.1-2.9 nm, a density of ∼1.53 mg·cm(-3), a thermal stability up to 600 °C in air, an electrical conductivity of ∼1.48 × 10(6) S·m(-1), and field emission current densities on the order of 10(4) A·cm(-2) at low applied electrical fields of 0.6-0.7 V·μm(-1). These properties show great promise for applications in flexible and lightweight electronics, electron guns, or X-ray tube sources.

  6. Characterization of anti-tubular basement membrane antibodies in rats.

    PubMed

    Zanetti, M; Wilson, C B

    1983-05-01

    Autoimmune tubulointerstitial nephritis was induced in Brown-Norway (BN) rats by immunization with bovine (Bov) tubular basement membrane (TBM) in complete Freund's adjuvant. Serum antibodies thus produced reacted to a greater extent with Bov than BN TBM antigens by indirect immunofluorescence and by radioimmunoassay with particulate (P) and collagenase-solubilized (CS) TBM. The quantities of antibodies reactive with CS TBM correlated with the intensity of tubulointerstitial pathologic changes. Antibodies eluted from kidneys reactive with BN TBM by indirect immunofluorescence were 508 times more concentrated in the kidney than in the serum, compared with 15 times for Bov TBM-reactive antibodies. The reactivity of eluted antibodies to P BN TBM was inhibited by 70% after absorption with BN CS TBM. A major CS TBM antigen of 42,000 m.w. was identified by polyacrylamide gel electrophoresis. This antigen was present in both Bov and BN TBM, and may be important in triggering autoantibody formation in this model. Lewis rats immunized under the same conditions produced antibodies reactive with BN TBM by immunofluorescence but failed to develop immune deposits in TBM of their own kidneys. Analysis of serum anti-TBM antibodies in Lewis rats revealed a selective lack of reactivity with either homologous or autologous CS TBM. These results suggest that the ability to make an immune response to one or more elements of CS TBM plays a major role in the development of autoimmune tubulointerstitial nephritis in rats.

  7. Bioprocess kinetics in a horizontal rotating tubular bioreactor.

    PubMed

    Ivancić, M; Santek, B; Novak, S; Horvat, P; Marić, V

    2004-04-01

    A horizontal rotating tubular bioreactor (HRTB) is a plug flow bioreactor whose interior is provided with O-ring-shaped partition walls that serve as carriers for microbial biomass. During this investigation, microbial biomass was grown in suspension and on the bioreactor inner surface as a microbial biofilm with average mass that was considerably higher than suspended biomass. The dynamics of bioprocess in HRTB was studied by different combinations of process parameters (bioreactor rotation speed and mean residence time) and it was monitored by withdrawing the samples from five positions along the bioreactor. During this investigation it was also observed that mean residence time had a more pronounced effect on the bioprocess dynamics than bioreactor rotation speed. For the description of bioprocess kinetics in HRTB an unstructured kinetic model was established that defines biomass growth, product formations and substrate consumption rate by using a modified Monod (Levenspiel) model. This kinetic model defines changes in suspension and in microbial biofilm, and it shows relatively good agreement with experimental data.

  8. Probing chirality of a lipid tubular by confocal Raman microscopy.

    PubMed

    Kiang-ia, Jarinee; Hailong, Hu; Bin, Yan; Jantippana, Yuwathida; Pantu, Piboon; Limtrakul, Jumras; Chattham, Nattaporn; Zexiang, Shen; Ting, Yu

    2010-11-01

    The chiral phospholipids 1,2-bis-(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DC8,9 PC) can self assemble into lipid nanotubules. This hollow cylindrical supramolecular structure shows promise in a number of biotechnological applications. The mechanism of lipid tubule formation was initiated by assembling of lipid bilayer sheets from amphiphilic solution. Upon cooling, small ribbons were detached from the sheets and rolled up into helical tubules. The lipid tubules obtained were 0.6-0.8 microm in diameter and approximately 50 microm in length. Raman spectra of individual polymerized lipid tubules were measured by focused laser excitation of 532 nm leading to intense and reproducible Raman spectra. The chirality of lipid tubules was investigated by atomic force microscopy (AFM) and confocal Raman microscopy. We report the Raman mapping images revealing helical tubular profiles of C=C stretching and C[triple bond]C stretching of lipid tubules. Circular dichroism property of lipid tubules has also been probed with a 532 nm laser.

  9. HIGH-TEMPERATURE TUBULAR SOLID OXIDE FUEL CELL GENERATOR DEVELOPMENT

    SciTech Connect

    S.E. Veyo

    1998-09-01

    During the Westinghouse/USDOE Cooperative Agreement period of November 1, 1990 through November 30, 1997, the Westinghouse solid oxide fuel cell has evolved from a 16 mm diameter, 50 cm length cell with a peak power of 1.27 watts/cm to the 22 mm diameter, 150 cm length dimensions of today's commercial prototype cell with a peak power of 1.40 watts/cm. Accompanying the increase in size and power density was the elimination of an expensive EVD step in the manufacturing process. Demonstrated performance of Westinghouse's tubular SOFC includes a lifetime cell test which ran for a period in excess of 69,000 hours, and a fully integrated 25 kWe-class system field test which operated for over 13,000 hours at 90% availability with less than 2% performance degradation over the entire period. Concluding the agreement period, a 100 kW SOFC system successfully passed its factory acceptance test in October 1997 and was delivered in November to its demonstration site in Westervoort, The Netherlands.

  10. Design and Analysis of Tubular Permanent Magnet Linear Wave Generator

    PubMed Central

    Si, Jikai; Feng, Haichao; Su, Peng; Zhang, Lufeng

    2014-01-01

    Due to the lack of mature design program for the tubular permanent magnet linear wave generator (TPMLWG) and poor sinusoidal characteristics of the air gap flux density for the traditional surface-mounted TPMLWG, a design method and a new secondary structure of TPMLWG are proposed. An equivalent mathematical model of TPMLWG is established to adopt the transformation relationship between the linear velocity of permanent magnet rotary generator and the operating speed of TPMLWG, to determine the structure parameters of the TPMLWG. The new secondary structure of the TPMLWG contains surface-mounted permanent magnets and the interior permanent magnets, which form a series-parallel hybrid magnetic circuit, and their reasonable structure parameters are designed to get the optimum pole-arc coefficient. The electromagnetic field and temperature field of TPMLWG are analyzed using finite element method. It can be included that the sinusoidal characteristics of air gap flux density of the new secondary structure TPMLWG are improved, the cogging force as well as mechanical vibration is reduced in the process of operation, and the stable temperature rise of generator meets the design requirements when adopting the new secondary structure of the TPMLWG. PMID:25050388

  11. Design and analysis of tubular permanent magnet linear wave generator.

    PubMed

    Si, Jikai; Feng, Haichao; Su, Peng; Zhang, Lufeng

    2014-01-01

    Due to the lack of mature design program for the tubular permanent magnet linear wave generator (TPMLWG) and poor sinusoidal characteristics of the air gap flux density for the traditional surface-mounted TPMLWG, a design method and a new secondary structure of TPMLWG are proposed. An equivalent mathematical model of TPMLWG is established to adopt the transformation relationship between the linear velocity of permanent magnet rotary generator and the operating speed of TPMLWG, to determine the structure parameters of the TPMLWG. The new secondary structure of the TPMLWG contains surface-mounted permanent magnets and the interior permanent magnets, which form a series-parallel hybrid magnetic circuit, and their reasonable structure parameters are designed to get the optimum pole-arc coefficient. The electromagnetic field and temperature field of TPMLWG are analyzed using finite element method. It can be included that the sinusoidal characteristics of air gap flux density of the new secondary structure TPMLWG are improved, the cogging force as well as mechanical vibration is reduced in the process of operation, and the stable temperature rise of generator meets the design requirements when adopting the new secondary structure of the TPMLWG.

  12. Protein-Mediated Transformation of Lipid Vesicles into Tubular Networks

    PubMed Central

    Simunovic, Mijo; Mim, Carsten; Marlovits, Thomas C.; Resch, Guenter; Unger, Vinzenz M.; Voth, Gregory A.

    2013-01-01

    Key cellular processes are frequently accompanied by protein-facilitated shape changes in the plasma membrane. N-BAR-domain protein modules generate curvature by means of complex interactions with the membrane surface. The way they assemble and the mechanism by which they operate are largely dependent on their binding density. Although the mechanism at lower densities has recently begun to emerge, how membrane scaffolds form at high densities remains unclear. By combining electron microscopy and multiscale simulations, we show that N-BAR proteins at high densities can transform a lipid vesicle into a 3D tubular network. We show that this process is a consequence of excess adhesive energy combined with the local stiffening of the membrane, which occurs in a narrow range of mechanical properties of both the membrane and the protein. We show that lipid diffusion is significantly reduced by protein binding at this density regime and even more in areas of high Gaussian curvature, indicating a potential effect on molecular transport in cells. Finally, we reveal that the breaking of the bilayer topology is accompanied by the nematic arrangement of the protein on the surface, a structural motif that likely drives the formation of reticular structures in living cells. PMID:23931319

  13. The fouling in the tubular heat exchanger of Algiers refinery

    NASA Astrophysics Data System (ADS)

    Harche, Rima; Mouheb, Abdelkader; Absi, Rafik

    2016-05-01

    Crude oil fouling in refinery preheat exchangers is a chronic operational problem that compromises energy recovery in these systems. Progress is hindered by the lack of quantitative knowledge of the dynamic effects of fouling on heat exchanger transfer and pressure drops. In subject of this work is an experimental determination of the thermal fouling resistance in the tubular heat exchanger of the crude oil preheats trains installed in an Algiers refinery. By measuring the inlet and outlet temperatures and mass flows of the two fluids, the overall heat transfer coefficient has been determined. Determining the overall heat transfer coefficient for the heat exchanger with clean and fouled surfaces, the fouling resistance was calculated. The results obtained from the two cells of exchangers studies, showed that the fouling resistance increased with time presented an exponential evolution in agreement with the model suggested by Kern and Seaton, with the existence of fluctuation caused by the instability of the flow rate and the impact between the particles. The bad cleaning of the heat exchangers involved the absence of the induction period and caused consequently, high values of the fouling resistance in a relatively short period of time.

  14. Standing wave brass-PZT square tubular ultrasonic motor.

    PubMed

    Park, Soonho; He, Siyuan

    2012-09-01

    This paper reports a standing wave brass-PZT tubular ultrasonic motor. The motor is composed of a brass square tube with two teeth on each tube end. Four PZT plates are attached to the outside walls of the brass tube. The motor requires only one driving signal to excite vibration in a single bending mode to generate reciprocating diagonal trajectories of teeth on the brass tube ends, which drive the motor to rotate. Bi-directional rotation is achieved by exciting different pairs of PZT plates to switch the bending vibration direction. Through using the brass-PZT tube structure, the motor can take high magnitude vibration to achieve a high output power in comparison to PZT tube based ultrasonic motors. Prototypes are fabricated and tested. The dimension of the brass-PZT tube is 3.975mm×3.975mm×16mm. Measured performance is a no-load speed of >1000RPM, a stall torque of 370μNm and a maximum output power of 16 mW when a sinusoidal driving voltage of 50V is applied. The working frequencies of the motor are 46,050Hz (clockwise) and 46,200Hz (counter-clockwise).

  15. A single vibration mode tubular piezoelectric ultrasonic motor.

    PubMed

    He, Siyuan; Chiarot, Paul R; Park, Soonho

    2011-05-01

    A novel tubular ultrasonic motor is presented that uses only a single vibration bending mode of a piezoelectric tube to generate rotation. When the piezoelectric tube bends, the diagonal motion of points on selected areas at the ends of the tube generates forces with tangential components along the same circumferential direction, driving the rotors to rotate. Bi-directional motion is achieved by simply switching the direction of bending. Because only one vibration mode is used, the motor requires only one driving signal and no vibration mode coupling is needed, simplifying the design, fabrication, assembly, and operation of the device. Two prototypes [one with cut-in lead zirconate titanate (PZT) teeth and one with added metal teeth] were built and tested using PZT tubes available to the authors. The tubes have an outside diameter of 6.6 mm, inner diameter of 5.0 mm, and length of 25.4 mm. The working frequencies of the two motors are 27.6 and 23.5 kHz. The motors achieved a maximum no-load speed of 400 rpm and a stall torque of 300 μN·m.

  16. Tubular silk scaffolds for small diameter vascular grafts

    PubMed Central

    Kluge, Jonathan A; Cannizzaro, Christopher; Kaplan, David L

    2010-01-01

    Vascular surgeries such as coronary artery bypass require small diameter vascular grafts with properties that are not available at this time. Approaches using synthetic biomaterials have not been completely successful in producing non-thrombogenic grafts with inner diameters less than 6 mm, and there is a need for new biomaterials and graft designs. We propose silk fibroin as a microvascular graft material and describe tubular silk scaffolds that demonstrate improved properties over existing vascular graft materials. Silk tubes produced using an aqueous gel spinning technique were first assessed in vitro in terms of thrombogenicity (thrombin and fibrinogen adsorption, platelet adhesion) and vascular cell responses (endothelial and smooth muscle cell attachment and proliferation) in comparison with polytetrafluoroethylene (PTFE), a synthetic material most frequently used for vascular grafts. Silk tubes were then implanted into the abdominal aortas of Sprague-Dawley rats. At time points of 2 weeks and 4 weeks post-implantation, tissue outcomes were assessed through gross observation (acute thrombosis, patency) and histological staining (H&E, Factor VIII, smooth muscle actin). Over the 4-week time period, we observed graft patency and endothelial cell lining of the lumen surfaces. These results demonstrate the feasibility of using silk fibroin as a vascular graft material and some advantages of silk tubes over the currently used synthetic grafts. PMID:21220960

  17. Tubular silk scaffolds for small diameter vascular grafts.

    PubMed

    Lovett, Michael; Eng, George; Kluge, Jonathan A; Cannizzaro, Christopher; Vunjak-Novakovic, Gordana; Kaplan, David L

    2010-01-01

    Vascular surgeries such as coronary artery bypass require small diameter vascular grafts with properties that are not available at this time. Approaches using synthetic biomaterials have been not completely successful in producing non-thrombogenic grafts with inner diameters less than 6 mm, and there is a need for new biomaterials and graft designs. We propose silk fibroin as a microvascular graft material and describe tubular silk scaffolds that demonstrate improved properties over existing vascular graft materials. Silk tubes produced using an aqueous gel spinning technique were first assessed in vitro in terms of thrombogenicity (thrombin and fibrinogen adsorption, platelet adhesion) and vascular cell responses (endothelial and smooth muscle cell attachment and proliferation) in comparison with polytetrafluoroethylene (PTFE), a synthetic material most frequently used for vascular grafts. Silk tubes were then implanted into the abdominal aortas of Sprague-Dawley rats. At time points of 2 weeks and 4 weeks post implantation, tissue outcomes were assessed through gross observation (acute thrombosis, patency) and histological staining (H&E, Factor VIII, smooth muscle actin). Over the 4-week time period, we observed graft patency and endothelial cell lining of the lumen surfaces. These results demonstrate the feasibility of using silk fibroin as a vascular graft material and some advantages of silk tubes over the currently used synthetic grafts.

  18. Wastewater containing Cr(VI) treatment using solar tubular reactor.

    PubMed

    Machado, Tiele Caprioli; Lansarin, Marla Azário

    2016-10-01

    The hexavalent chromium, Cr(VI), which is generated in the electroplating process, is toxic to most organisms and potentially harmful to human health. The method generally used for remediation of wastewater containing Cr(VI) employs chemicals with high toxicity. This work proposes an alternative technology for the treatment of these wastewaters, based on photochemical reduction of Cr(VI) by alcohols under radiation, which is environmentally sustainable and economically viable. Initially, a batch reactor in laboratory scale was used to determine the best experimental conditions and its specific reaction rate was calculated. Based on these results, a tubular reactor (artificial radiation and sunlight) was designed and built in semi-pilot scale. Tests were carried out with real wastewater from an electroplating industry containing Cr(VI). Tests conducted under sunlight showed a higher total Cr(VI) reduction than the tests with artificial radiation. The remediation of Cr(VI) from wastewater was 86.7% after 6 h of reaction under sunlight, indicating the high efficiency of the developed process.

  19. Apical targeting of the formin Diaphanous in Drosophila tubular epithelia

    PubMed Central

    Rousso, Tal; Shewan, Annette M; Mostov, Keith E; Schejter, Eyal D; Shilo, Ben-Zion

    2013-01-01

    Apical secretion from epithelial tubes of the Drosophila embryo is mediated by apical F-actin cables generated by the formin-family protein Diaphanous (Dia). Apical localization and activity of Dia are at the core of restricting F-actin formation to the correct membrane domain. Here we identify the mechanisms that target Dia to the apical surface. PI(4,5)P2 levels at the apical membrane regulate Dia localization in both the MDCK cyst model and in Drosophila tubular epithelia. An N-terminal basic domain of Dia is crucial for apical localization, implying direct binding to PI(4,5)P2. Dia apical targeting also depends on binding to Rho1, which is critical for activation-induced conformational change, as well as physically anchoring Dia to the apical membrane. We demonstrate that binding to Rho1 facilitates interaction with PI(4,5)P2 at the plane of the membrane. Together these cues ensure efficient and distinct restriction of Dia to the apical membrane. DOI: http://dx.doi.org/10.7554/eLife.00666.001 PMID:23853710

  20. Combined hot-spot stress procedures for tubular joints

    SciTech Connect

    Buitrayo, J.; Kahlich, J.L.; Zettlemoyer, N.

    1984-05-01

    An alternative procedure for predicting the combined hot-spot stress (CHSS) at tubular K and Y joints under combined branch loading is presented. The procedure makes use of influence factor (IF) equations developed, as a function of the joint geometry and branch loading, for various potential hot-spot locations on the branch and chord sides of the weld. The CHSS is obtained by lineraly superimposing, at a point, the effects of the axial force and bending moments acting on each branch. The resulting CHSS, therefore, reflects location, orientation and sign of each branch load contribution. Comparisons of predicted CHSS obtained via the new and other procedures to stresses from finite element analyses were made on a large sample of joints. Result show that (1) the new procedure is substantially more reliable than the other procedures studied, (2) none of the procedures consistently predicts conservative CHSS values, and (3) the overriding factor influencing the accuracy of the CHSS calculations appears to be the accuracy of the parametric equations. Although a better stress predictor can be expected to yield more reliable fatigue damage estimates, damage calculations will exhibit broad scatter due to the power function relating damage to stress. Unfortunately, further improvements in the accuracy of CHSS based on parametric equations are not likely to be easily achieved, given the large number of variables and locations that need to be considered.

  1. COPI acts in both vesicular and tubular transport

    PubMed Central

    Yang, Jia-Shu; Valente, Carmen; Polishchuk, Roman S.; Turacchio, Gabriele; Layre, Emilie; Moody, D. Branch; Leslie, Christina C.; Gelb, Michael H.; Brown, William J.; Corda, Daniela; Luini, Alberto; Hsu, Victor W.

    2011-01-01

    Intracellular transport is now appreciated to occur through two general types of carriers, either vesicles 1, 2 or tubules 3, 4. Coat proteins act as the core machinery that initiates vesicle formation 1, 2, but the counterpart that initiates tubule formation has been unclear. Here, we find that the Coat Protein I (COPI) complex initially drives the formation of Golgi buds. Subsequently, a set of opposing lipid enzymatic activities determines whether these buds become vesicles or tubules. Lysophosphatidic acid (LPA) acyltransferase type γ (LPAAT–γ) promotes COPI vesicle fission for retrograde vesicular transport. In contrast, cytosolic phospholipase A2 type α (cPLA2–α) inhibits this fission event to induce COPI tubules, which act in anterograde intra-Golgi transport and Golgi ribbon formation. These findings not only advance a molecular understanding of how COPI vesicle fission is achieved, but also shed new insight into how COPI acts in intra-Golgi transport and reveal an unexpected mechanistic relationship between vesicular and tubular transport. PMID:21725317

  2. Tubular microbial fuel cells for efficient electricity generation.

    PubMed

    Rabaey, Korneel; Clauwaert, Peter; Aelterman, Peter; Verstraete, Willy

    2005-10-15

    A tubular, single-chambered, continuous microbial fuel cell (MFC) that generates high power outputs using a granular graphite matrix as the anode and a ferricyanide solution as the cathode is described. The maximal power outputs obtained were 90 and 66 W m(-3) net anodic compartment (NAC) (48 and 38 W m(-3) total anodic compartment (TAC)) for feed streams based on acetate and glucose, respectively, and 59 and 48 W m(-3) NAC for digester effluent and domestic wastewater, respectively. For acetate and glucose, the total Coulombic conversion efficiencies were 75 +/- 5% and 59 +/- 4%, respectively, at loading rates of 1.1 kg chemical oxygen demand m(-3) NAC volume day(-1). When wastewater was used, of the organic matter effectively removed (i.e., 22% at a loading of 2 kg organic matter m(-3) NAC day(-1)), up to 96% was converted to electricity on a Coulombic basis. The lower overall efficiency of the wastewater-treating reactors is related to the presence of nonreadily biodegradable organics and the interference of alternative electron acceptors such as sulfate present in the wastewater. To further improve MFCs, focus has to be placed on the enhanced conversion of nonrapidly biodegradable material and the better directing of the anode flow toward the electrode instead of to alternative electron acceptors. Also the use of sustainable, open-air cathodes is a critical issue for practical implementation.

  3. Etiopathology of chronic tubular, glomerular and renovascular nephropathies: clinical implications.

    PubMed

    López-Novoa, José M; Rodríguez-Peña, Ana B; Ortiz, Alberto; Martínez-Salgado, Carlos; López Hernández, Francisco J

    2011-01-20

    Chronic kidney disease (CKD) comprises a group of pathologies in which the renal excretory function is chronically compromised. Most, but not all, forms of CKD are progressive and irreversible, pathological syndromes that start silently (i.e. no functional alterations are evident), continue through renal dysfunction and ends up in renal failure. At this point, kidney transplant or dialysis (renal replacement therapy, RRT) becomes necessary to prevent death derived from the inability of the kidneys to cleanse the blood and achieve hydroelectrolytic balance. Worldwide, nearly 1.5 million people need RRT, and the incidence of CKD has increased significantly over the last decades. Diabetes and hypertension are among the leading causes of end stage renal disease, although autoimmunity, renal atherosclerosis, certain infections, drugs and toxins, obstruction of the urinary tract, genetic alterations, and other insults may initiate the disease by damaging the glomerular, tubular, vascular or interstitial compartments of the kidneys. In all cases, CKD eventually compromises all these structures and gives rise to a similar phenotype regardless of etiology. This review describes with an integrative approach the pathophysiological process of tubulointerstitial, glomerular and renovascular diseases, and makes emphasis on the key cellular and molecular events involved. It further analyses the key mechanisms leading to a merging phenotype and pathophysiological scenario as etiologically distinct diseases progress. Finally clinical implications and future experimental and therapeutic perspectives are discussed.

  4. Contactless two-stage solar concentrators for tubular absorber

    NASA Astrophysics Data System (ADS)

    Benitez, Pablo; Minano, Juan C.; Garcia, Raphael; Mohedano Arroyo, Ruben

    1997-10-01

    Two new types of two-mirror solar concentrator for tubular receiver, the snail concentrator and the helmet concentrator , are presented. The main feature of these concentrators is that they have a sizable gap between the secondary mirror and the absorber, and they still achieve concentrations close to the thermodynamic limit with high collection efficiencies. This characteristic makes them unique and, on the contrary to the present two-stage designs, allows for the location of the secondary outside the evacuated tube. One of the differences between the snail and the helmet concentrators is that the last is symmetric (as the conventional parabolic trough) but the first is not. For an acceptance angle of (alpha) equals +/- 0.73 degs and a collection efficiency of 96.8% (i.e. 3.2% of the rays incident on the primary mirror within the acceptance angle are rejected), the snail concentrator and the helmet concentrator achieve an average flux concentration of 91.1% and 72.8% of the thermodynamic limit, respectively. The gap between the absorber and the secondary mirror is 6.8 and 12.1 times the absorber radius for each concentrator. Moreover, both concentrators have also high rim angles of the primary mirror: +/- 86.2 degs (helmet) and 3.1 - 98.8 degs (snail). This is of interest for a good mechanical stability of the collector.

  5. The thermal decomposition of methane in a tubular reactor

    SciTech Connect

    Kobayashi, Atsushi; Steinberg, M.

    1992-01-01

    The reaction rate of methane decomposition using a tubular reactor having a 1 inch inside diameter with an 8 foot long heated zone was investigated in the temperature range of 700 to 900 C with pressures ranging from 28.2 to 56.1 atm. Representing the rate by a conventional model, {minus}dC{sub CH4}/dt= k1 C{sub CH4} {minus}k2 C{sub H2}{sup 2}, the rate constant k1 for methane decomposition was determined. The activation energy, 31.3 kcal/mol, calculated by an Arrhenius Plot was lower than for previously published results for methane decomposition. This result indicates that submicron particles found in the reactor adhere to the inside of the reactor and these submicron high surface area carbon particles tend to catalyze the methane decomposition. The rate constant has been found to be approximately constant at 900 C with pressure range cited above. The rate of methane decomposition increases with methane partial pressure in first-order. The rate of the methane decomposition is favored by higher temperatures and pressures while the thermochemical equilibrium of methane decomposition is favored by lower pressures. 8 refs., 7 figs., 2 tabs.

  6. Design and characterization of a hyperelastic tubular soft composite.

    PubMed

    Shaheen, Robert; Doumit, Marc; Helal, Alexander

    2017-11-01

    Research in the field of human mobility assistive devices, aiming to reduce the metabolic cost of daily activities, is seeing the benefits of the exclusive use of passive actuators to store and release energy during the gait cycle. Current devices commonly employ either mechanical springs or Pneumatic Artificial Muscles as the primary method of passive actuation. The Pneumatic Artificial Muscle has proven to be a superior actuation choice for these devices, when compared to its alternatives. However, challenges regarding muscle pressure loss and limited elongation potential have been identified. This paper presents a hyperelastic tubular Soft Composite that replicates the distinctive mechanical behaviour of the Pneumatic Artificial Muscle without the need for internal pressurization. The proposed Soft Composite solution is achieved by impregnating a prefabricated polyethylene terephthalate braided sleeve, held at a high initial fibre angle, with a silicone prepolymer. A comprehensive experimental evaluation is achieved on numerous prototypes for a variety of customizable design parameters including: the initial fibre angle, the silicone stiffness, and the braided sleeve style. This research has successfully developed, tested, and validated a novel Soft Composite that can achieve the desired nonlinear stiffness and elongation potential for optimal use as passive actuation in human mobility assistive devices. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. An asymmetric tubular ceramic-carbonate dual phase membrane for high temperature CO2 separation.

    PubMed

    Dong, Xueliang; Ortiz Landeros, José; Lin, Y S

    2013-10-25

    For the first time, a tubular asymmetric ceramic-carbonate dual phase membrane was prepared by a centrifugal casting technique and used for high temperature CO2 separation. This membrane shows high CO2 permeation flux and permeance.

  8. Bubble-Free Propulsion of Ultrasmall Tubular Nanojets Powered by Biocatalytic Reactions.

    PubMed

    Ma, Xing; Hortelao, Ana C; Miguel-López, Albert; Sánchez, Samuel

    2016-10-26

    The motion of self-propelled tubular micro- and nanojets has so far been achieved by bubble propulsion, e.g., O2 bubbles formed by catalytic decomposition of H2O2, which renders future biomedical applications inviable. An alternative self-propulsion mechanism for tubular engines on the nanometer scale is still missing. Here, we report the fabrication and characterization of bubble-free propelled tubular nanojets (as small as 220 nm diameter), powered by an enzyme-triggered biocatalytic reaction using urea as fuel. We studied the translational and rotational dynamics of the nanojets as functions of the length and location of the enzymes. Introducing tracer nanoparticles into the system, we demonstrated the presence of an internal flow that extends into the external fluid via the cavity opening, leading to the self-propulsion. One-dimensional nanosize, longitudinal self-propulsion, and biocompatibility make the tubular nanojets promising for future biomedical applications.

  9. 75 FR 49527 - Metaldyne Corporation, Metaldyne Tubular Products, Currently Known as Flexible Metal, Inc...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-08-13

    ... Flexible Metal, Inc., Powertrain Division, Hamburg, MI; Amended Certification Regarding Eligibility To... automotive industry. Information shows that on June 10, 2010, Flexible Metals, Inc. purchased Metaldyne Corporation, Metaldyne Tubular Products, Powertrain Div. and is currently known as Flexible Metals, Inc...

  10. Novel tubular and crystalline structures in purified preparations of Newcastle disease virus. Brief report.

    PubMed

    Gowans, E J; McNulty, M S

    1979-01-01

    Hitherto undescribed tubular and crystalline structures were detected by negative contrast electron microscopy in purified preparations of Newcastle disease virus. It is suggested that these are viral in origin and are composed of aggregates of viral glycoprotein.

  11. A dynamic physics-based model for tubular IPMC sensors under torsional excitation

    NASA Astrophysics Data System (ADS)

    Lei, Hong; Sharif, Montassar Aidi; Tan, Xiaobo

    2016-04-01

    Ionic polymer-metal composites (IPMCs) have intrinsic sensing and actuation properties. An IPMC sensor typically has the beam shape and responds to bending deflections only. Recently tubular IPMCs have been proposed for omnidirectional sensing of bending stimuli. In this paper we report, to our best knowledge, the first study on torsion sensing with tubular IPMCs. In particular, a dynamic, physics-based model is presented for a tubular IPMC sensor under pure torsional stimulus. With the symmetric tubular structure and the pure torsion condition, the stress distribution inside the polymer only varies along the radial direction, resulting in a one-dimensional model. The dynamic model is derived by analytically solving the governing partial differential equation, accommodating the assumed boundary condition that the charge density is proportional to the mechanically induced stress. Experiments are further conducted to estimate the physical parameters of the proposed model.

  12. 78 FR 45502 - Certain Oil Country Tubular Goods From India and Turkey: Initiation of Countervailing Duty...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-07-29

    ... International Trade Administration Certain Oil Country Tubular Goods From India and Turkey: Initiation of Countervailing Duty Investigations AGENCY: Import Administration, International Trade Administration, Department..., International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue...

  13. Bubble-Free Propulsion of Ultrasmall Tubular Nanojets Powered by Biocatalytic Reactions

    PubMed Central

    2016-01-01

    The motion of self-propelled tubular micro- and nanojets has so far been achieved by bubble propulsion, e.g., O2 bubbles formed by catalytic decomposition of H2O2, which renders future biomedical applications inviable. An alternative self-propulsion mechanism for tubular engines on the nanometer scale is still missing. Here, we report the fabrication and characterization of bubble-free propelled tubular nanojets (as small as 220 nm diameter), powered by an enzyme-triggered biocatalytic reaction using urea as fuel. We studied the translational and rotational dynamics of the nanojets as functions of the length and location of the enzymes. Introducing tracer nanoparticles into the system, we demonstrated the presence of an internal flow that extends into the external fluid via the cavity opening, leading to the self-propulsion. One-dimensional nanosize, longitudinal self-propulsion, and biocompatibility make the tubular nanojets promising for future biomedical applications. PMID:27718566

  14. Expanding Your School. Is It Worth It?

    ERIC Educational Resources Information Center

    Friedberg, Richard; And Others

    1986-01-01

    Identifies concerns and potential problems that will surface while trying to expand a school. The decision to expand and the criterion to be considered in reaching that critical judgment is comprehensively discussed. (CT)

  15. Expanding Your School. Is It Worth It?

    ERIC Educational Resources Information Center

    Friedberg, Richard; And Others

    1986-01-01

    Identifies concerns and potential problems that will surface while trying to expand a school. The decision to expand and the criterion to be considered in reaching that critical judgment is comprehensively discussed. (CT)

  16. Hypokalemic quadriparesis and rhabdomyolysis as a rare presentation of distal renal tubular acidosis

    PubMed Central

    Ahmad Bhat, Manzoor; Ahmad Laway, Bashir; Mustafa, Farhat; Shafi Kuchay, Mohammad; Mubarik, Idrees; Ahmad Palla, Nazir

    2014-01-01

    Distal renal tubular acidosis is a syndrome of abnormal urine acidification and is characterized by hyperchloremic metabolic acidosis, hypokalemia, hypercalciurea, nephrocalcinosis and nephrolithiasis. Despite the presence of persistent hypokalemia, acute muscular paralysis is rarely encountered in males. Here, we will report an eighteen year old male patient who presented with flaccid quadriparesis and was subsequently found to have rhabdomyolysis, severe short stature, skeletal deformities and primary distal renal tubular acidosis. PMID:25250276

  17. [Forensic medical characteristic of sawed injuries inflicted to the long tubular bones by a power jigsaw].

    PubMed

    Nazarov, Iu V; Tolmachev, I A

    2013-01-01

    The main aspects of investigations devoted to forensic medical characteristic of sawed injuries inflicted to the long tubular bones by a power jigsaw are considered. The mathematical model has been developed making it possible to determine the frequency of backward and forward movements of the jigsaw blade from the morphological features of the injuries to long tubular bones of man and to estimate the sawing rate for the further identification of the instrument of crime.

  18. Design and performance of tubular flat-plate solid oxide fuel cell

    SciTech Connect

    Matsushima, T.; Ikeda, D.; Kanagawa, H.

    1996-12-31

    With the growing interest in conserving the environmental conditions, much attention is being paid to Solid Oxide Fuel Cell (SOFC), which has high energy-conversion efficiency. Many organizations have conducted studies on tubular and flat type SOFCs. Nippon Telegraph and Telephone Corporation (NTT) has studied a combined tubular flat-plate SOFC, and already presented the I-V characteristics of a single cell. Here, we report the construction of a stack of this SOFC cell and successful generation tests results.

  19. Protective Role of Apelin Against Cyclosporine-Induced Renal Tubular Injury in Rats.

    PubMed

    Kim, J S; Yang, J W; Han, B G; Kwon, H J; Kim, J H; Choi, S O

    Cyclosporine (CsA) usually reduces glomerular filtration rate (GFR) but also can induce tubular injury without resulting in GFR reduction. Apelin is an endogenous ligand for the apelin receptor and has diverse physiologic roles related to hemodynamic or metabolic processes. We investigated the renoprotective role of apelin against CsA-induced tubular toxicity in rats. Rats were given CsA (15 mg/kg/day) and/or apelin-13 (15 μg/kg/day) for 7 days via subcutaneous injection. We performed serum and urinary assays of creatinine and neutrophil gelatinase-associated lipocalin (NGAL) to estimate renal injury and performed Western blotting for endothelial nitric oxide synthase and nuclear factor of activated T-cell cytoplasmic 1 (NFATc1) to document the underlying mechanism. The CsA-treated group showed increased urinary creatinine excretion, polyuria, and renal glycosuria without GFR reduction, suggesting adequate CsA-induced renal tubular injury. Urinary NGAL excretion also increased significantly in the CsA group. Conversely, apelin attenuated CsA-induced tubular injury and had no effect on urinary NGAL excretion. In histopathologic examination, the apelin-treated group had lower tubulo-interstitial injury scores compared with those in the CsA group. Regarding the effects of apelin, our results indicate that apelin provides protection against CsA-induced tubular injury by activating nitric oxide and/or the NFATc1 pathway. Notably, we also found that CsA inhibits renal glucose reabsorption by reducing Na(+)-K(+) ATPase expression and that apelin reverses reduced renal glucose reabsorption by CsA in tubular cells. Our study demonstrates the renoprotective effect of apelin against CsA-induced renal tubular toxicity and provides novel insights into the effects of CsA and apelin on renal tubular cells. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Renal tubular dysfunction presenting as recurrent hypokalemic periodic quadriparesis in systemic lupus erythematosus

    PubMed Central

    Prasad, D.; Agarwal, D.; Malhotra, V.; Beniwal, P.

    2014-01-01

    We report recurrent hypokalemic periodic quadriparesis in a 30-year-old woman. Patient had also symptoms of multiple large and small joint pain, recurrent oral ulceration, photosensitivity and hair loss that were persisting since last 6 months and investigations revealed systemic lupus erythematosus (SLE) with distal tubular acidosis. Our patient was successfully treated with oral potassium chloride, sodium bicarbonate, hydroxychloroquine and a short course of steroids. Thus, tubular dysfunction should be carefully assessed in patients with SLE. PMID:25249723

  1. Bigelow Expandable Activity Module (BEAM) Monitoring System

    NASA Technical Reports Server (NTRS)

    Wells, Nathan

    2017-01-01

    What is Bigelow Expandable Activity Module (BEAM)? The Bigelow Expandable Activity Module (BEAM) is an expandable habitat technology demonstration on ISS; increase human-rated inflatable structure Technology Readiness Level (TRL) to level 9. NASA managed ISS payload project in partnership with Bigelow Aerospace. Launched to ISS on Space X 8 (April 8th, 2016). Fully expanded on May 28th, 2016. Jeff Williams/Exp. 48 Commander first entered BEAM on June 5th, 2016.

  2. Variable delivery, fixed displacement pump

    DOEpatents

    Sommars, Mark F.

    2001-01-01

    A variable delivery, fixed displacement pump comprises a plurality of pistons reciprocated within corresponding cylinders in a cylinder block. The pistons are reciprocated by rotation of a fixed angle swash plate connected to the pistons. The pistons and cylinders cooperate to define a plurality of fluid compression chambers each have a delivery outlet. A vent port is provided from each fluid compression chamber to vent fluid therefrom during at least a portion of the reciprocal stroke of the piston. Each piston and cylinder combination cooperates to close the associated vent port during another portion of the reciprocal stroke so that fluid is then pumped through the associated delivery outlet. The delivery rate of the pump is varied by adjusting the axial position of the swash plate relative to the cylinder block, which varies the duration of the piston stroke during which the vent port is closed.

  3. [High-Definition Exoscope System for Microneurosurgery:Use of an Exoscope in Combination with Tubular Retraction and Frameless Neuronavigation for Microsurgical Resection of Deep Brain Lesions].

    PubMed

    Nagatani, Kimihiro; Takeuchi, Satoru; Feng, Dongxia; Mori, Kentaro; Day, J Diaz

    2015-07-01

    The high-definition exoscope (VITOM®, Karl Storz GmbH & Co., Tuttlingen, Germany) is a new equipment that can be used as an alternative to the operating microscope in neurosurgery. Several neurosurgeons have recently reported that the exoscope allows for long working distances and great depth of field. Herein, we review reported cases of exoscope use in neurosurgery. We also describe the advantages of the exoscope compared to the operating microscope and endoscope. Furthermore, we introduce a novel technique for microsurgical resection of deep brain lesions, in which the exoscope is used along with tubular retraction and frameless neuronavigation. Before the operation, neuronavigation is registered and the surgical trajectory is planned to avoid damaging the functional cortex and eloquent white matter tracts. By using intraoperative neuronavigation, the tubular retractor (NICO BrainPath®, NICO Corporation, Indianapolis, US), which is designed to split the white matter when gently inserted, is inserted transcortically into the brain to reach the lesion, along the preplanned trajectory. After insertion, the tubular retractor is fixed in place using a self-retaining arm. This creates a narrow corridor that enables the use of the exoscope (for optimum visualization), bimanual dissection technique, and long bayoneted surgical instruments. The large focal distance of the exoscope allows it to be placed sufficiently further away from the surgical site, permitting the passage of long surgical instruments under the scope. Although obtaining surgical access to deep-seated brain lesions is challenging, we consider that this technique facilitates a safe surgical approach for lesions in deep locations.

  4. Comparison between small radiation therapy electron beams collimated by Cerrobend and tubular applicators.

    PubMed

    Di Venanzio, Cristina; Marinelli, Marco; Tonnetti, Alessia; Verona-Rinati, Gianluca; Bagalà, Paolo; Falco, Maria Daniela; Guerra, Antonio Stefano; Pimpinella, Maria

    2015-01-08

    The purpose of this study was to compare the dosimetric properties of small field electron beams shaped by circular Cerrobend blocks and stainless steel tubular applicators. Percentage depth dose curves, beam profiles, and output factors of small-size circular fields from 2 to 5 cm diameter, obtained either by tubular applicators and Cerrobend blocks, were measured for 6, 10, and 15 MeV electron beam energies. All measurements were performed using a PTW microDiamond 60019 premarket prototype. An overall similar behavior between the two collimating systems can be observed in terms of PDD and beam profiles. However, Cerrobend collimators produce a higher bremsstrahlung background under irradiation with high-energy electrons. In such irradiation condition, larger output factors are observed for tubular applicators. Similar dosimetric properties are observed using circular Cerrobend blocks and stainless steel tubular applicators at lower beam energies. However, Cerrobend collimators allow the delivery of specific beam shapes, conformed to the target area. On the other hand, in high-energy irradiation conditions, tubular applicators produce a lower bremsstrahlung contribution, leading to lower doses outside the target volume. In addition, the higher output factors observed at high energies for tubular applicators lead to reduced treatment times.

  5. The effect of acyclovir on the tubular secretion of creatinine in vitro

    PubMed Central

    2010-01-01

    Background While generally well tolerated, severe nephrotoxicity has been observed in some children receiving acyclovir. A pronounced elevation in plasma creatinine in the absence of other clinical manifestations of overt nephrotoxicity has been frequently documented. Several drugs have been shown to increase plasma creatinine by inhibiting its renal tubular secretion rather than by decreasing glomerular filtration rate (GFR). Creatinine and acyclovir may be transported by similar tubular transport mechanisms, thus, it is plausible that in some cases, the observed increase in plasma creatinine may be partially due to inhibition of tubular secretion of creatinine, and not solely due to decreased GFR. Our objective was to determine whether acyclovir inhibits the tubular secretion of creatinine. Methods Porcine (LLC-PK1) and human (HK-2) renal proximal tubular cell monolayers cultured on microporous membrane filters were exposed to [2-14C] creatinine (5 μM) in the absence or presence of quinidine (1E+03 μM), cimetidine (1E+03 μM) or acyclovir (22 - 89 μM) in incubation medium. Results Results illustrated that in evident contrast to quinidine, acyclovir did not inhibit creatinine transport in LLC-PK1 and HK-2 cell monolayers. Conclusions The results suggest that acyclovir does not affect the renal tubular handling of creatinine, and hence, the pronounced, transient increase in plasma creatinine is due to decreased GFR, and not to a spurious increase in plasma creatinine. PMID:21192814

  6. Catalase overexpression prevents hypertension and tubular apoptosis in angiotensinogen transgenic mice.

    PubMed

    Godin, Nicolas; Liu, Fang; Lau, Garnet J; Brezniceanu, Marie-Luise; Chénier, Isabelle; Filep, Janos G; Ingelfinger, Julie R; Zhang, Shao-Ling; Chan, John S D

    2010-06-01

    Transgenic mice that overexpress angiotensinogen, the sole precursor of angiotensins, in their renal proximal tubular cells develop hypertension, albuminuria, and tubular apoptosis. These pathological changes are due to enhanced generation of reactive oxygen species in the proximal tubule cells. Here, we determined whether overexpression of catalase to decrease oxidant injury in the proximal tubular cells could reverse these abnormalities. Double-transgenic mice specifically overexpressing angiotensinogen and catalase in their renal proximal tubular cells were created by cross-breeding the single transgenics. Non-transgenic littermates served as controls. Overexpression of catalase prevented hypertension, albuminuria, tubulointerstitial fibrosis, and tubular apoptosis in the angiotensinogen transgenic mice. Furthermore, the double transgenics had lower reactive oxygen species generation and reduced pro-fibrotic and apoptotic gene expression in the renal proximal tubular cells. Renal angiotensin converting enzyme-2 expression and urinary angiotensin 1-7 levels were downregulated in the single but normal in the double-transgenic mice. Thus, we suggest that the intrarenal renin-angiotensin system and reactive oxygen species generation have an important role in the development of hypertension and renal injury.

  7. Human embryonic stem cells differentiate into functional renal proximal tubular-like cells.

    PubMed

    Narayanan, Karthikeyan; Schumacher, Karl M; Tasnim, Farah; Kandasamy, Karthikeyan; Schumacher, Annegret; Ni, Ming; Gao, Shujun; Gopalan, Began; Zink, Daniele; Ying, Jackie Y

    2013-04-01

    Renal cells are used in basic research, disease models, tissue engineering, drug screening, and in vitro toxicology. In order to provide a reliable source of human renal cells, we developed a protocol for the differentiation of human embryonic stem cells into renal epithelial cells. The differentiated stem cells expressed markers characteristic of renal proximal tubular cells and their precursors, whereas markers of other renal cell types were not expressed or expressed at low levels. Marker expression patterns of these differentiated stem cells and in vitro cultivated primary human renal proximal tubular cells were comparable. The differentiated stem cells showed morphological and functional characteristics of renal proximal tubular cells, and generated tubular structures in vitro and in vivo. In addition, the differentiated stem cells contributed in organ cultures for the formation of simple epithelia in the kidney cortex. Bioreactor experiments showed that these cells retained their functional characteristics under conditions as applied in bioartificial kidneys. Thus, our results show that human embryonic stem cells can differentiate into renal proximal tubular-like cells. Our approach would provide a source for human renal proximal tubular cells that are not affected by problems associated with immortalized cell lines or primary cells.

  8. mTORC1 maintains renal tubular homeostasis and is essential in response to ischemic stress.

    PubMed

    Grahammer, Florian; Haenisch, Nora; Steinhardt, Frederic; Sandner, Lukas; Sander, Lukas; Roerden, Malte; Arnold, Frederic; Cordts, Tomke; Wanner, Nicola; Reichardt, Wilfried; Kerjaschki, Dontscho; Ruegg, Markus A; Hall, Michael N; Moulin, Pierre; Busch, Hauke; Boerries, Melanie; Walz, Gerd; Artunc, Ferruh; Huber, Tobias B

    2014-07-08

    Mammalian target of rapamycin complex 1 (mTORC1) is a key regulator of cell metabolism and autophagy. Despite widespread clinical use of mTORC1 inhibitors, the role of mTORC1 in renal tubular function and kidney homeostasis remains elusive. By using constitutive and inducible deletion of conditional Raptor alleles in renal tubular epithelial cells, we discovered that mTORC1 deficiency caused a marked concentrating defect, loss of tubular cells, and slowly progressive renal fibrosis. Transcriptional profiling revealed that mTORC1 maintains renal tubular homeostasis by controlling mitochondrial metabolism and biogenesis as well as transcellular transport processes involved in countercurrent multiplication and urine concentration. Although mTORC2 partially compensated for the loss of mTORC1, exposure to ischemia and reperfusion injury exaggerated the tubular damage in mTORC1-deficient mice and caused pronounced apoptosis, diminished proliferation rates, and delayed recovery. These findings identify mTORC1 as an important regulator of tubular energy metabolism and as a crucial component of ischemic stress responses.

  9. mTORC1 maintains renal tubular homeostasis and is essential in response to ischemic stress

    PubMed Central

    Grahammer, Florian; Haenisch, Nora; Steinhardt, Frederic; Sandner, Lukas; Roerden, Malte; Arnold, Frederic; Cordts, Tomke; Wanner, Nicola; Reichardt, Wilfried; Kerjaschki, Dontscho; Ruegg, Markus A.; Hall, Michael N.; Moulin, Pierre; Busch, Hauke; Boerries, Melanie; Walz, Gerd; Artunc, Ferruh; Huber, Tobias B.

    2014-01-01

    Mammalian target of rapamycin complex 1 (mTORC1) is a key regulator of cell metabolism and autophagy. Despite widespread clinical use of mTORC1 inhibitors, the role of mTORC1 in renal tubular function and kidney homeostasis remains elusive. By using constitutive and inducible deletion of conditional Raptor alleles in renal tubular epithelial cells, we discovered that mTORC1 deficiency caused a marked concentrating defect, loss of tubular cells, and slowly progressive renal fibrosis. Transcriptional profiling revealed that mTORC1 maintains renal tubular homeostasis by controlling mitochondrial metabolism and biogenesis as well as transcellular transport processes involved in countercurrent multiplication and urine concentration. Although mTORC2 partially compensated for the loss of mTORC1, exposure to ischemia and reperfusion injury exaggerated the tubular damage in mTORC1-deficient mice and caused pronounced apoptosis, diminished proliferation rates, and delayed recovery. These findings identify mTORC1 as an important regulator of tubular energy metabolism and as a crucial component of ischemic stress responses. PMID:24958889

  10. Inner Surface Chirality of Single-Handed Twisted Carbonaceous Tubular Nanoribbons.

    PubMed

    Liu, Dan; Li, Baozong; Guo, Yongmin; Li, Yi; Yang, Yonggang

    2015-11-01

    Single-handed twisted 4,4'-biphenylene-bridged polybissilsesquioxane tubular nanoribbons and single-layered nanoribbons were prepared by tuning the water/ethanol volume ratio in the reaction mixture at pH = 11.6 through a supramolecular templating approach. The single-layered nanoribbons were formed by shrinking tubular nanoribbons after the removal of the templates. In addition, solvent-induced handedness inversion was achieved. The handedness of the polybissilsesquioxanes could be controlled by changing the ethanol/water volume ratio in the reaction mixture. After carbonization at 900 °C for 4.0 h and removal of silica, single-handed twisted carbonaceous tubular nanoribbons and single-layered nanoribbons with micropores in the walls were obtained. X-ray diffraction and Raman spectroscopy analyses indicated that the carbon is predominantly amorphous. The circular dichroism spectra show that the twisted tubular nanoribbons exhibit optical activity, while the twisted single-layered nanoribbons do not. The results shown here indicate that chirality is transferred from the organic self-assemblies to the inner surfaces of the 4,4'-biphenylene-bridged polybissilsesquioxane tubular nanoribbons and subsequently to those of the carbonaceous tubular nanoribbons.

  11. Matrigel-induced tubular morphogenesis of human eccrine sweat gland epithelial cells.

    PubMed

    Lei, Xia; Liu, Bo; Wu, Jinjin; Lu, Yuangang; Yang, Yadong

    2011-09-01

    Human eccrine sweat glands are tubule-structured glands of the skin that are vital in thermoregulation, secretion, and excretion of water and electrolytes. A study of tubular morphogenesis in vitro would facilitate the development of a tissue engineering model for eccrine sweat glands and other tubule-structured glands. Matrigel, a basement membrane matrix, has been shown to promote differentiation and morphogenesis of many different cell types, including tubular cells. This study investigated the growth, differentiation, and tubular morphogenesis of human eccrine sweat gland epithelial cells cultured in Matrigel. Human eccrine gland epithelial cells were isolated and cultured in vitro. The cell growth in Matrigel was evidenced by the formation of cell clusters, which were observed under an inverted microscope. The internal structure of the cell clusters was further investigated by hematoxylin-eosin (HE) staining and confocal laser scanning microscopy (CLSM) of propidium iodide-stained nuclei. The results demonstrated that although on a plastic surface or in a collagen gel the cells could not form tubular structures, they formed tubular structures when cultured in Matrigel. Consequently, we conclude that Matrigel can promote tubular morphogenesis of human eccrine sweat gland epithelial cells.

  12. Changes in Proximal and Distal Tubular Reabsorption Produced by Rapid Expansion of Extracellular Fluid*

    PubMed Central

    Hayslett, John P.; Kashgarian, Michael; Epstein, Franklin H.

    1967-01-01

    Acute infusions of isotonic saline in the rat cause an increase in glomerular filtration rate and in the excretion of salt and water. The kidney swells, due to expansion of tubular and interstitial volume. Despite the increase in tubular diameter, transit time through the proximal tubules and loops of Henle is decreased, presumably owing to a greatly accelerated rate of tubular flow. Proximal tubular reabsorption, measured in blocked tubules, is inhibited in a way that cannot be ascribed to changes in tubular diameter. The prolongation of proximal reabsorptive half-time is not affected by the administration of aldosterone. It occurs equally in rats chronically loaded with or deprived of salt, and it is therefore not likely that it is influenced by the renal content of renin. In contrast, reabsorption from the distal convoluted tubule is enhanced by saline infusion. This change is observed in segments of tubules blocked with oil and isolated from their glomeruli and thus appears to occur independently of changes in glomerular filtration or tubular flow. Images PMID:6027087

  13. Expandable Lunar Habitat (X-Hab)

    NASA Image and Video Library

    2010-09-23

    Expandable Lunar Habitat (X-Hab).ILC Dover, under contract by NASA Langley Research Center, and in cooperation with NASA Johnson Space Center has designed and manufactured an expandable lunar habitat. This cylindrical habitat, or Expandable Lunar Habitat (X-Hab) is a hybrid system with two hard end caps and a deployable softgoods section in the center.

  14. Fixed-film biological processes

    SciTech Connect

    Josephson, J.

    1982-07-01

    During the 1970's, interest in fixed-film biological (FFB) processes for wastewater treatment has increased markedly. One reason for this is that these systems have a potential for considerable energy savings, as compared to conventional suspended-growth or activated-sludge systems, and certain FFB processes may eventually become energy producers. In this article, FFB processes are reviewed. Aerobic and anaerobic FFB systems are discussed and compared, along with a discussion of the toxic substances produced by FFB processes.

  15. Fixed target flammable gas upgrades

    SciTech Connect

    Schmitt, R.; Squires, B.; Gasteyer, T.; Richardson, R.

    1996-12-01

    In the past, fixed target flammable gas systems were not supported in an organized fashion. The Research Division, Mechanical Support Department began to support these gas systems for the 1995 run. This technical memo describes the new approach being used to supply chamber gasses to fixed target experiments at Fermilab. It describes the engineering design features, system safety, system documentation and performance results. Gas mixtures provide the medium for electron detection in proportional and drift chambers. Usually a mixture of a noble gas and a polyatomic quenching gas is used. Sometimes a small amount of electronegative gas is added as well. The mixture required is a function of the specific chamber design, including working voltage, gain requirements, high rate capability, aging and others. For the 1995 fixed target run all the experiments requested once through gas systems. We obtained a summary of problems from the 1990 fixed target run and made a summary of the operations logbook entries from the 1991 run. These summaries primarily include problems involving flammable gas alarms, but also include incidents where Operations was involved or informed. Usually contamination issues were dealt with by the experimenters. The summaries are attached. We discussed past operational issues with the experimenters involved. There were numerous incidents of drift chamber failure where contaminated gas was suspect. However analyses of the gas at the time usually did not show any particular problems. This could have been because the analysis did not look for the troublesome component, the contaminant was concentrated in the gas over the liquid and vented before the sample was taken, or that contaminants were drawn into the chambers directly through leaks or sub-atmospheric pressures. After some study we were unable to determine specific causes of past contamination problems, although in argon-ethane systems the problems were due to the ethane only.

  16. Zirconia in fixed implant prosthodontics.

    PubMed

    Guess, Petra Christine; Att, Wael; Strub, Joerg Rudolf

    2012-10-01

    CAD/CAM technology in combination with zirconia ceramic has increasingly gained popularity in implant dentistry. This narrative review presents the current knowledge on zirconia utilized as framework material for implant-borne restorations and implant abutments, laboratory tests and developments, clinical performance, and possible future trends for implant dentistry are addressed. A review of available literature from 1990 through 2010 was conducted with search terms zirconia,"implants,"abutment,"crown," and "fixed dental prosthesis" using electronic databases (PubMed) and manual searching. Latest applications of zirconia in implant dentistry include implant abutments, multiple unit and full-arch frameworks as well as custom-made bars to support fixed and removable prostheses. High biocompatibility, low bacterial surface adhesion as well as favorable chemical properties of zirconia ceramics are reported. Zirconia stabilized with yttrium oxide exhibits high flexural strength and fracture toughness due to a transformation toughening mechanism. Preliminary clinical data confirmed the high stability of zirconia for abutments and as a framework material for implant borne crowns and fixed dental prostheses. Zirconia abutment or framework damage has rarely been encountered. However, veneering porcelain fractures are the most common technical complication in implant-supported zirconia restorations. These porcelain veneer failures have led to concerns regarding differences in coefficient of thermal expansions between core and veneering porcelain and their respective processing techniques. As presently evidence of clinical long-term data is missing, caution with regard to especially extensive implant-borne zirconia frameworks is recommended. © 2010 Wiley Periodicals, Inc.

  17. Peroxisome proliferator-activated receptor alpha protects renal tubular cells from gentamicin-induced apoptosis via upregulating Na(+)/H(+) exchanger NHE1.

    PubMed

    Chen, Cheng-Hsien; Chen, Tso-Hsiao; Wu, Mei-Yi; Chen, Jia-Rung; Tsai, Hwei-Fang; Hong, Li-Yu; Zheng, Cai-Mei; Chiu, I-Jen; Lin, Yuh-Feng; Hsu, Yung-Ho

    2015-11-23

    Peroxisome proliferator-activated receptor alpha (PPARα) is a transcription factor which has been reported to inhibit gentamicin-induced apoptosis in renal tubular cells. However, the antiapoptotic mechanism of PPARα is still unknown. In this study, we found that PPARα overexpression induced Na(+)/H(+) exchanger NHE1 expression in the rat renal tubular cells NRK-52E. Beraprost, a PPARα ligand, also increased NHE1 expression in the renal tubules in normal mice, but not in PPARα knockout mice. Chromatin immunoprecipitation assays revealed that two PPARα binding elements were located in the rat NHE1 promoter region. Na(+)/H(+) exchanger activity also increased in the PPARα-overexpressed cells. Flow cytometry showed that the PPARα-overexpressed cells were resistant to apoptosis-induced shrinkage. Cariporide, a selective NHE1 inhibitor, inhibited the antiapoptotic effect of PPARα in the gentamicin-treated cells. The interaction between NHE1 and ezrin/radixin/moesin (ERM) and between ERM and phosphatidylinositol 4,5-bisphosphate in the PPARα-overexpressed cells was more than in the control cells. ERM siRNA transfection inhibited the PPARα-induced antiapoptotic effect. PPARα overexpression also increased the phosphoinositide 3-kinase (PI3K) expression, which is dependent on NHE1 activity. Increased PI3K further increased the phosphorylation of the pro-survival kinase Akt in the PPARα-overexpressed cells. Wortmannin, a PI3K inhibitor, inhibited PPARα-induced Akt activity and the antiapoptotic effect. We conclude that PPARα induces NHE1 expression, and then recruits ERM to promote PI3K/Akt-mediated cell survival in renal tubular cells. The application of PPARα activation reduces the nephrotoxicity of gentamicin and may expand the clinical use of gentamicin.

  18. Influence of cooling design on fixed-bed reactors dynamics

    SciTech Connect

    Buccala, V.; Borio, D.O.; Romagnoli, J.A.; Porras, J.A. )

    1992-12-01

    Tubular fixed-bed reactors of the heat-exchanger type are selected commonly in industrial plants to carry out highly exothermic reactions. Due to the important heat effects involved, these units usually exhibit the well-known problems of a pronounced maximum in the axial temperature profile (hot spot), combined with high parametric sensitivity. The authors analyzed the response of axial temperature and concentration profiles to changes in the reactant's inlet conditions for the cocurrent design. Nevertheless, more critical disturbances are changes at the inlet coolant temperature which is often used as an indirect manipulated variable for control purposes. Therefore, the influence of this variable on the reactor dynamics will be studied in this paper. Recent steady-state simulation results have shown that the behavior of this type of reactors depends strongly on the mutual direction of the reacting fluid and coolant streams. As optimal operation conditions cannot be defined only on the basis of steady-state analysis, this work complements the above-mentioned works by means of a similar development, performed under nonsteady-state conditions. The underlying idea is that to be confirmed as the best choice, the optimal design found from steady-state analysis should demonstrate also to exhibit an acceptable dynamic performance.

  19. Leak detection with expandable coatings

    NASA Technical Reports Server (NTRS)

    1971-01-01

    Developed and evaluated is a system for leak detection that can be easily applied over separable connectors and that expands into a bubble or balloon if a leak is present. This objective is accomplished by using thin films of Parafilm tape wrapped over connectors, which are then overcoated with a special formulation. The low yield strength and the high elongation of the envelope permit bubble formation if leakage occurs. This system is appropriate for welds and other hardware besides separable connectors. The practical limit of this system appears to be for leaks exceeding 0.000001 cc/sec. If this envelope is used to trap gases for mass spectrometer inspection, leaks in the range of ten to the minus 8th power cc/sec. may be detectable.

  20. OCT Expanded Clinical Data Analysis

    NASA Technical Reports Server (NTRS)

    Van Baalen, Mary; Tafreshi, Ali; Patel, Nimesh; Young, Millennia; Mason, Sara; Otto, Christian; Samuels, Brian; Koslovsky, Matthew; Schaefer, Caroline; Taiym, Wafa; hide

    2017-01-01

    Vision changes identified in long duration space fliers has led to a more comprehensive clinical monitoring protocol. Optical Coherence Tomography (OCT) was recently implemented on board the International Space Station in 2013. NASA is collaborating with Heidelberg Engineering to expand our current OCT data analysis capability by implementing a volumetric approach. Volumetric maps will be created by combining the circle scan, the disc block scan, and the radial scan. This assessment may provide additional information about the optic nerve and further characterize changes related microgravity exposure. We will discuss challenges with collection and analysis of OCT data, present the results of this reanalysis and outline the potential benefits and limitations of the additional data.

  1. Expanding Human Cognition and Communication

    SciTech Connect

    Spohrer, Jim; Pierce, Brian M.; Murray, Cherry A.; Golledge, Reginald G.; Horn, Robert E.; Turkle, Sherry; Yonas, Gerold; Glicken Turnley, Jessica; Pollack, Jordan; Burger, Rudy; Robinett, Warren; Wilson, Larry Todd; Bainbridge, W. S.; Canton, J.; Kuekes, P.; Loomis, J.; Penz, P.

    2013-01-01

    To be able to chart the most profitable future directions for societal transformation and corresponding scientific research, five multidisciplinary themes focused on major goals have been identified to fulfill the overall motivating vision of convergence described in the previous pages. The first, “Expanding Human Cognition and Communication,” is devoted to technological breakthroughs that have the potential to enhance individuals’ mental and interaction abilities. Throughout the twentieth century, a number of purely psychological techniques were offered for strengthening human character and personality, but evaluation research has generally failed to confirm the alleged benefits of these methods (Druckman and Bjork 1992; 1994). Today, there is good reason to believe that a combination of methods, drawing upon varied branches of converging science and technology, would be more effective than attempts that rely upon mental training alone.

  2. Shear Acceleration in Expanding Flows

    NASA Astrophysics Data System (ADS)

    Rieger, F. M.; Duffy, P.

    2016-12-01

    Shear flows are naturally expected to occur in astrophysical environments and potential sites of continuous non-thermal Fermi-type particle acceleration. Here we investigate the efficiency of expanding relativistic outflows to facilitate the acceleration of energetic charged particles to higher energies. To this end, the gradual shear acceleration coefficient is derived based on an analytical treatment. The results are applied to the context of the relativistic jets from active galactic nuclei. The inferred acceleration timescale is investigated for a variety of conical flow profiles (i.e., power law, Gaussian, Fermi-Dirac) and compared to the relevant radiative and non-radiative loss timescales. The results exemplify that relativistic shear flows are capable of boosting cosmic-rays to extreme energies. Efficient electron acceleration, on the other hand, requires weak magnetic fields and may thus be accompanied by a delayed onset of particle energization and affect the overall jet appearance (e.g., core, ridge line, and limb-brightening).

  3. Deep Brain Stimulation: Expanding Applications

    PubMed Central

    TEKRIWAL, Anand; BALTUCH, Gordon

    2015-01-01

    For over two decades, deep brain stimulation (DBS) has shown significant efficacy in treatment for refractory cases of dyskinesia, specifically in cases of Parkinson's disease and dystonia. DBS offers potential alleviation from symptoms through a well-tolerated procedure that allows personalized modulation of targeted neuroanatomical regions and related circuitries. For clinicians contending with how to provide patients with meaningful alleviation from often debilitating intractable disorders, DBSs titratability and reversibility make it an attractive treatment option for indications ranging from traumatic brain injury to progressive epileptic supra-synchrony. The expansion of our collective knowledge of pathologic brain circuitries, as well as advances in imaging capabilities, electrophysiology techniques, and material sciences have contributed to the expanding application of DBS. This review will examine the potential efficacy of DBS for neurologic and psychiatric disorders currently under clinical investigation and will summarize findings from recent animal models. PMID:26466888

  4. Preventive Ethics Through Expanding Education.

    PubMed

    Ho, Anita; MacDonald, Lisa Mei-Hwa; Unger, David

    2016-03-01

    Healthcare institutions have been making increasing efforts to standardize consultation methodology and to accredit both bioethics training programs and the consultants accordingly. The focus has traditionally been on the ethics consultation as the relevant unit of ethics intervention. Outcome measures are studied in relation to consultations, and the hidden assumption is that consultations are the preferred or best way to address day-to-day ethical dilemmas. Reflecting on the data from an internal quality improvement survey and the literature, we argue that having general ethics education as a key function of ethics services may be more important in meeting the contemporaneous needs of acute care settings. An expanded and varied ethics education, with attention to the time constraints of healthcare workers' schedules, was a key recommendation brought forward by survey respondents. Promoting ethical reflection and creating a culture of ethics may serve to prevent ethical dilemmas or mitigate their effects.

  5. Expanding the Trilinos developer community.

    SciTech Connect

    Heroux, Michael Allen

    2010-10-01

    The Trilinos Project started approximately nine years ago as a small effort to enable research, development and ongoing support of small, related solver software efforts. The 'Tri' in Trilinos was intended to indicate the eventual three packages we planned to develop. In 2007 the project expanded its scope to include any package that was an enabling technology for technical computing. Presently the Trilinos repository contains over 55 packages covering a broad spectrum of reusable tools for constructing full-featured scalable scientific and engineering applications. Trilinos usage is now worldwide, and many applications have an explicit dependence on Trilinos for essential capabilities. Users come from other US laboratories, universities, industry and international research groups. Awareness and use of Trilinos is growing rapidly outside of Sandia. Members of the external research community are becoming more familiar with Trilinos, its design and collaborative nature. As a result, the Trilinos project is receiving an increasing number of requests from external community members who want to contribute to Trilinos as developers. To-date we have worked with external developers in an ad hoc fashion. Going forward, we want to develop a set of policies, procedures, tools and infrastructure to simplify interactions with external developers. As we go forward with multi-laboratory efforts such as CASL and X-Stack, and international projects such as IESP, we will need a more streamlined and explicit process for making external developers 'first-class citizens' in the Trilinos development community. This document is intended to frame the discussion for expanding the Trilinos community to all strategically important external members, while at the same time preserving Sandia's primary leadership role in the project.

  6. Expanded retroauricular skin and fascial flap in congenital microtia reconstruction.

    PubMed

    Zhang, Qingguo; Quan, Yuzhu; Su, Yuanda; Shi, Lei; Xie, Yangchun; Liu, Xinhai

    2010-04-01

    The aim of this article is to report the application of expanding retroauricular skin fascia flap, and autogenous costal cartilage for congenital microtia reconstruction. Microtia reconstruction was generally completed in 3 surgical stages. In the first surgical stage, a 50 or 80 mL kidney-shaped tissue expander was inserted subcutaneously in the retroauricular mastoid region. Inflation of saline volume increased up to 60 to 80 mL, and skin flap was expanded for 2 to 3 months postoperatively. In the second surgical stage, removal of tissue expander, formation of retroauricular skin flap, elevation of retroauricular fascia flap, and pedicles of both flaps in remnant ear side were performed. Costal cartilage was harvested from ipsilateral side chest to the ear for reconstruction. The 3D ear framework was sculpted with stabilization of structure, contour and erection. Simultaneously, intermediate full thickness skin graft of 4 x 8 cm was obtained from previous incision site from where costal cartilage was harvested. Cartilage ear framework was anchored between skin flap and fascia flap, and fixed it symmetrically to the opposite normal ear, inferior portion of the ear framework was wrapped by remnant ear lobule, expanded skin flap covered the anterior portion of the framework, fascial flap was draped to the posterior side of framework and helical rim, then fascial flap was surfaced by intermediate full thickness skin graft. Suction drain was inserted and coated between skin flap and framework, drain was removed fifth postoperative day. Tragus construction and conchal excavation with skin graft was performed in the third stage of microtia reconstruction. Between October 2000 and October 2007, 426 cases were diagnosed as unilateral microtia patients and 22 cases were bilateral microtia patients. Therefore, 448 microtia ears were treated with tissue expander and autogenous costal cartilage. In 262 cases, structure of the helix, tragus, conchal excavation

  7. [Itai-itai disease: cadmium-induced renal tubular osteomalacia].

    PubMed

    Aoshima, Keiko

    2012-01-01

    Cadmium (Cd) is one of the most toxic elements to which humans could be exposed at work or in the environment. The outbreak of itai-itai disease, which is the most severe stage of chronic Cd poisoning, occurred in the Cd-polluted Jinzu River basin in Toyama. In this area, the river was contaminated by slag from a mine upstream; as a consequence, the soil in rice paddies was polluted with heavy metals including Cd through irrigation water from around 1910 to the 1960s. The government of Toyama prefecture carried out an extensive survey on Cd concentration in rice and soil of the paddy fields and declared that the upper layer of a total of 1500 ha of paddy fields should be replaced by nonpolluted soil. Then, an intervention program of soil replacement in the polluted paddy fields was continually carried out from 1980 to 2011. As a result, Cd concentration in rice markedly decreased. The kidney is the organ critically affected after long-term exposure to Cd. Proximal tubular dysfunction (RTD) has been found among the inhabitants of the Jinzu River basin. The very recent report by the Environmental Agency in Japan in 2009 has disclosed that b2-microglobulinuria with RTD is still found at a high prevalence among the inhabitants of the Jinzu River basin of both sexes. Twenty patients with itai-itai disease (1 male and 19 females), who attended our hospital and received medical examination during 2000 to 2008, had applied for recognition as itai-itai disease patients to the government of Toyama prefecture. In this paper, the recent epidemiological and clinical features of itai-itai disease are discussed on the basis of a review of the cases of these 19 female patients.

  8. Design, construction and evaluation of solarized airlift tubular photobioreactor

    NASA Astrophysics Data System (ADS)

    Bahadur, A.; Zubair, M.; Khan, M. B.

    2013-06-01

    An innovative photobioreactor is developed for growing algae in simulated conditions. The proposed design comprises of a continuous tubular irradiance loop and air induced liquid circulation with gas separation through air lift device. The unique features of air lift system are to ensure the shear free circulation of sensitive algal culture and induce light/dark cycles to the photosynthetic micro-organisms. The design strategy employs to model and construct a 20-liter laboratory scale unit using Boro-silicate glass tubing. The material is selected to ensure maximum photon transmission. All components of the device are designed to have flexibility to be replaced with an alternative design, providing fair chance of modification for future investigators. The principles of fluid mechanics are applied to describe geometrical attributes of the air lift system. Combination of LEDs and Florescent tube lights (Warm white) were used to illuminate the photosynthesis reaction area providing a possibility to control both illumination duration and light intensity. 200 Watt Solar PV system is designed to power up the device which included air pump (100 Watt) and illumination system (100 Watt). Algal strain Chlorella sp was inoculated in photobioreactor which was sparged with air and carbon dioxide. The growth was sustained in the batch mode with daily monitoring of temperature, pH and biomass concentration. The novel photobioreactor recorded a maximum experimental average yield of 0.65 g/l.day (11.3 g/m2.day) as compared to theoretical modeled yield of 0.82 g/l.day (14.26 g/m2.day), suggesting the device can be efficiently and cost-effectively employed in the production of algal biomass for biofuels, concomitantly mitigating CO2.

  9. Renal tubular acidosis is highly prevalent in critically ill patients.

    PubMed

    Brunner, Richard; Drolz, Andreas; Scherzer, Thomas-Matthias; Staufer, Katharina; Fuhrmann, Valentin; Zauner, Christian; Holzinger, Ulrike; Schneeweiß, Bruno

    2015-04-06

    Hyperchloremic acidosis is frequent in critically ill patients. Renal tubular acidosis (RTA) may contribute to acidemia in the state of hyperchloremic acidosis, but the prevalence of RTA has never been studied in critically ill patients. Therefore, we aimed to investigate the prevalence, type, and possible risk factors of RTA in critically ill patients using a physical-chemical approach. This prospective, observational trial was conducted in a medical ICU of a university hospital. One hundred consecutive critically ill patients at the age ≥18, expected to stay in the ICU for ≥24 h, with the clinical necessity for a urinary catheter and the absence of anuria were included. Base excess (BE) subset calculation based on a physical-chemical approach on the first 7 days after ICU admission was used to compare the effects of free water, chloride, albumin, and unmeasured anions on the standard base excess. Calculation of the urine osmolal gap (UOG)--as an approximate measure of the unmeasured urine cation NH4(+)--served as determinate between renal and extrarenal bicarbonate loss in the state of hyperchloremic acidosis. During the first week of ICU stay 43 of the patients presented with hyperchloremic acidosis on one or more days represented as pronounced negative BEChloride. In 31 patients hyperchloremic acidosis was associated with RTA characterized by a UOG ≤150 mosmol/kg in combination with preserved renal function. However, in 26 of the 31 patients with RTA metabolic acidosis was neutralized by other acid-base disturbances leading to a normal arterial pH. RTA is highly prevalent in critically ill patients with hyperchloremic acidosis, whereas it is often neutralized by the simultaneous occurrence of other acid-base disturbances. Clinicaltrials.gov NCT02392091. Registered 17 March 2015.

  10. An experimental reciprocating expander for cryocooler application

    NASA Technical Reports Server (NTRS)

    Minta, M.; Smith, J. L., Jr.

    1985-01-01

    An experimental reciprocating expander was designed with features appropriate for cryocooler cycles. The expander has a displacer piston, simple valves, and a hydraulic/pneumatic stroking mechanism. The expander has a valve in head configuration with the valves extending out the bottom of the vacuum enclosure while the piston extends out the top. The expander was tested using a CTI 1400 liquefier to supply 13 atm in the temperature range 4.2 to 12 K. Expander efficiency was measured in the range 84 to 93% while operating the apparatus as a supercritical wet expander and in the range 91 to 93% aa a single phase expander. The apparatus can also be modified to operate as a compressor for saturated helium vapor.

  11. Production of biodiesel using expanded gas solvents

    SciTech Connect

    Ginosar, Daniel M; Fox, Robert V; Petkovic, Lucia M

    2009-04-07

    A method of producing an alkyl ester. The method comprises providing an alcohol and a triglyceride or fatty acid. An expanding gas is dissolved into the alcohol to form a gas expanded solvent. The alcohol is reacted with the triglyceride or fatty acid in a single phase to produce the alkyl ester. The expanding gas may be a nonpolar expanding gas, such as carbon dioxide, methane, ethane, propane, butane, pentane, ethylene, propylene, butylene, pentene, isomers thereof, and mixtures thereof, which is dissolved into the alcohol. The gas expanded solvent may be maintained at a temperature below, at, or above a critical temperature of the expanding gas and at a pressure below, at, or above a critical pressure of the expanding gas.

  12. Urinary excretion of beta 2-glycoprotein-1 (apolipoprotein H) and other markers of tubular malfunction in "non-tubular" renal disease.

    PubMed Central

    Flynn, F. V.; Lapsley, M.; Sansom, P. A.; Cohen, S. L.

    1992-01-01

    AIM: To determine whether urinary beta 2-glycoprotein-1 assays can provide improved discrimination between chronic renal diseases which are primarily of tubular or glomerular origin. METHODS: Urinary beta 2-glycoprotein-1, retinol-binding protein, alpha 1-microglobulin, beta 2-microglobulin, N-acetyl-beta-D-glucosa-minidase and albumin were measured in 51 patients with primary glomerular disease, 23 with obstructive nephropathy, and 15 with polycystic kidney disease, and expressed per mmol of creatinine. Plasma beta 2-glycoprotein-1 was assayed in 52 patients and plasma creatinine in all 89. The findings were compared between the diagnostic groups and with previously published data relating to primary tubular disorders. RESULTS: All 31 patients with plasma creatinine greater than 200 mumol/l excreted increased amounts of beta 2-glycoprotein-1, retinol-binding protein, and alpha 1-microglobulin, and 29 had increased N-acetyl-beta-D-glucosaminidase; the quantities were generally similar to those found in comparable patients with primary tubular pathology. Among 58 with plasma creatinine concentrations under 200 mumol/l, increases in beta 2-glycoprotein-1, retinol-binding protein, and alpha 1-microglobulin excretion were less common and much smaller, especially in those with obstructive nephropathy and polycystic disease. The ratios of the excretion of albumin to the other proteins provided the clearest discrimination between the patients with glomerular or tubular malfunction, but an area of overlap was present which embraced those with obstructive nephropathy and polycystic disease. CONCLUSIONS: Increased excretion of beta 2-glycoprotein-1 due to a raised plasma concentration or diminution of tubular reabsorption, or both, is common in all the forms of renal disease investigated, and both plasma creatinine and urinary albumin must be taken into account when interpreting results. Ratios of urinary albumin: beta 2-glycoprotein-1 greater than 1000 are highly suggestive

  13. Model of An Expanding Heliosphere

    NASA Astrophysics Data System (ADS)

    Song, P.; Vasyliunas, V. M.

    2015-12-01

    Conventional models of the heliosphere assume that the heliopause is formed, similarly to the magnetopause of a planet, at the location where the total pressure of the exterior (interstellar) medium is balanced by the total pressure of the interior (heliospheric) medium. The heliosphere, however, differs greatly from a planetary magnetosphere in being dominated by a continuous interior source of mass (present in some planetary magnetospheres, notably Jupiter and Saturn, but not to anything like the same extent), and it differs as well from systems with large interior mass sources such as comets (to which it has also been compared) in being threaded by magnetic flux from its central object (the Sun). The heliosphere must thus expand continually as more and more mass is put into it by the solar wind, with the heliopause marching into the interstellar medium at some non-zero speed while maintaining the plasma total (thermal plus magnetic) pressure equal to that of the interstellar medium. A steady state heliosphere is, strictly speaking, impossible unless and until the distinction between the heliospheric and the interstellar medium has disappeared. The geometry of the expansion can be visualized in different ways. Conventionally it is taken for granted that the expansion is deflected by interstellar flow sideways and channeled into an extended wake/tail region, the rest of the heliosphere being in apparently steady state. Even if this may occur, it would be at a distance much larger than commonly assumed. We explore the alternative possibility of a heliosphere expanding predominantly in the radial direction and describe some of its properties. The input from solar wind and interplanetary magnetic field during each solar cycle forms a shell, with subsequent cycles adding shells of alternating magnetic polarities. The ultimate extent of the heliosphere (in all directions) and the number of shells can be limited by the time until either the solar output or the

  14. Shear Stress-Induced Alteration of Epithelial Organization in Human Renal Tubular Cells

    PubMed Central

    Belloy, Marcy; Saulnier-Blache, Jean-Sébastien; Casemayou, Audrey; Ducasse, Laure; Grès, Sandra; Bellière, Julie; Caubet, Cécile; Bascands, Jean-Loup; Schanstra, Joost P.; Buffin-Meyer, Bénédicte

    2015-01-01

    Tubular epithelial cells in the kidney are continuously exposed to urinary fluid shear stress (FSS) generated by urine movement and recent in vitro studies suggest that changes of FSS could contribute to kidney injury. However it is unclear whether FSS alters the epithelial characteristics of the renal tubule. Here, we evaluated in vitro and in vivo the influence of FSS on epithelial characteristics of renal proximal tubular cells taking the organization of junctional complexes and the presence of the primary cilium as markers of epithelial phenotype. Human tubular cells (HK-2) were subjected to FSS (0.5 Pa) for 48h. Control cells were maintained under static conditions. Markers of tight junctions (Claudin-2, ZO-1), Par polarity complex (Pard6), adherens junctions (E-Cadherin, β-Catenin) and the primary cilium (α-acetylated Tubulin) were analysed by quantitative PCR, Western blot or immunocytochemistry. In response to FSS, Claudin-2 disappeared and ZO-1 displayed punctuated and discontinuous staining in the plasma membrane. Expression of Pard6 was also decreased. Moreover, E-Cadherin abundance was decreased, while its major repressors Snail1 and Snail2 were overexpressed, and β-Catenin staining was disrupted along the cell periphery. Finally, FSS subjected-cells exhibited disappeared primary cilium. Results were confirmed in vivo in a uninephrectomy (8 months) mouse model where increased FSS induced by adaptive hyperfiltration in remnant kidney was accompanied by both decreased epithelial gene expression including ZO-1, E-cadherin and β-Catenin and disappearance of tubular cilia. In conclusion, these results show that proximal tubular cells lose an important number of their epithelial characteristics after long term exposure to FSS both in vitro and in vivo. Thus, the changes in urinary FSS associated with nephropathies should be considered as potential insults for tubular cells leading to disorganization of the tubular epithelium. PMID:26146837

  15. Shear Stress-Induced Alteration of Epithelial Organization in Human Renal Tubular Cells.

    PubMed

    Maggiorani, Damien; Dissard, Romain; Belloy, Marcy; Saulnier-Blache, Jean-Sébastien; Casemayou, Audrey; Ducasse, Laure; Grès, Sandra; Bellière, Julie; Caubet, Cécile; Bascands, Jean-Loup; Schanstra, Joost P; Buffin-Meyer, Bénédicte

    2015-01-01

    Tubular epithelial cells in the kidney are continuously exposed to urinary fluid shear stress (FSS) generated by urine movement and recent in vitro studies suggest that changes of FSS could contribute to kidney injury. However it is unclear whether FSS alters the epithelial characteristics of the renal tubule. Here, we evaluated in vitro and in vivo the influence of FSS on epithelial characteristics of renal proximal tubular cells taking the organization of junctional complexes and the presence of the primary cilium as markers of epithelial phenotype. Human tubular cells (HK-2) were subjected to FSS (0.5 Pa) for 48 h. Control cells were maintained under static conditions. Markers of tight junctions (Claudin-2, ZO-1), Par polarity complex (Pard6), adherens junctions (E-Cadherin, β-Catenin) and the primary cilium (α-acetylated Tubulin) were analysed by quantitative PCR, Western blot or immunocytochemistry. In response to FSS, Claudin-2 disappeared and ZO-1 displayed punctuated and discontinuous staining in the plasma membrane. Expression of Pard6 was also decreased. Moreover, E-Cadherin abundance was decreased, while its major repressors Snail1 and Snail2 were overexpressed, and β-Catenin staining was disrupted along the cell periphery. Finally, FSS subjected-cells exhibited disappeared primary cilium. Results were confirmed in vivo in a uninephrectomy (8 months) mouse model where increased FSS induced by adaptive hyperfiltration in remnant kidney was accompanied by both decreased epithelial gene expression including ZO-1, E-cadherin and β-Catenin and disappearance of tubular cilia. In conclusion, these results show that proximal tubular cells lose an important number of their epithelial characteristics after long term exposure to FSS both in vitro and in vivo. Thus, the changes in urinary FSS associated with nephropathies should be considered as potential insults for tubular cells leading to disorganization of the tubular epithelium.

  16. Tubular carcinoma of the breast: prognosis and response to adjuvant systemic therapy.

    PubMed

    Kitchen, P R; Smith, T H; Henderson, M A; Goldhirsch, A; Castiglione-Gertsch, M; Coates, A S; Gusterson, B; Brown, R W; Gelber, R D; Collins, J P

    2001-01-01

    Tubular carcinoma of the breast is an uncommon and usually small tumour, and is thought to have a favourable prognosis. The present study examined the long-term prognosis of patients with tubular breast carcinoma and the roles of axillary dissection and adjuvant therapy. Eighty-six tubular cases were identified from a large worldwide database of 9520 breast carcinoma patients entered into randomized adjuvant therapy trials run by the International Breast Cancer Study Group from 1978 to 1999. These patients were followed for a median of 12 years. Forty-two (49%) cases were node-positive, of which 33 (79%) had 1-3 nodes involved. Ten (32%) of the 31 smaller tumours (< or = 1 cm in size) were node-positive. Patients with node-positive tubular carcinoma had a significantly better 10-year relapse-free survival (P = 0.006) and survival (P < 0.0001) compared with non-tubular node-positive cases. Overall survival was similar for node-positive and node-negative tubular carcinoma. Overall, 71 patients (83%) received some form of adjuvant systemic therapy. Of the 86 cases, 43 (50%) received more than one course of chemotherapy. There was an 85% decrease in the risk of death for patients who received more than one course of chemotherapy compared to those who did not (hazard ratio 0.15, 95% confidence interval (CI): 0.03-0.82; P = 0.03). Compared to other histological types of breast cancer, tubular carcinoma has a better long-term prognosis. Adjuvant chemotherapy may further improve prognosis and involvement of axillary nodes may not be an indicator for early death due to breast carcinoma.

  17. Elimination of etimicin in rat kidneys and alterations of its cytotoxicity to tubular epithelial cells.

    PubMed

    Li, Z-D; Zhang, X-L; Yi, N; Zhang, F-C

    2015-05-01

    Etimicin (ETM) can accumulate in kidneys and cause tubular epithelial cell cytotoxicity. This article aims to study ETM elimination in kidneys and its nephrotoxicity, apoptosis, and histopathological insults of renal tubular epithelial cells, after repeated administration. A total of 36 rats were randomly divided into ETM-treated group and vehicle control group. Rats in ETM-treated group were treated intraperitoneally (i.p.) with 100 mg/kg/day ETM and rats in control group received physiological saline (i.p.) for 5 consecutive days. Determination of ETM concentrations accumulated in rat kidneys was carried out by high-performance liquid chromatography on the basis of derivatization with o-phthalaldehyde and by ultraviolet detector. Apoptotic renal tubular epithelial cells were identified by a terminal deoxynucleotidyl transferase deoxyuridine triphosphate nick-end labeling assay. Histopathological insults in kidneys were evaluated by hematoxylin and eosin staining. On day 1 after cessation of ETM administration, the accumulation concentration was 347.50 ± 193.30 μg/g tissue; on day 15, ETM concentration became 16.71 ± 9.99 μg/g tissue. Elimination half-life of ETM in rat kidney was about 3.05 days. Apoptotic renal tubular epithelial cells induced by etimicin was recovered gradually from 1544 ± 138 n/mm(2) on day 1 to 716 ± 208 n/mm(2) on day 15. Histopathological damage was also gradually recovered from vacuolation of tubular epithelial cells as well as renal tubular edema on days 1, 3, and 7 to nearly normal on day 15. From these results, we concluded that renal tubular epithelial cell cytotoxicity induced by ETM can gradually restore with its decreasing concentration in rat kidneys.

  18. Widespread bullous fixed drug eruption.

    PubMed

    Patell, Rushad D; Dosi, Rupal V; Shah, Purav C; Joshi, Harshal S

    2014-02-07

    A 53-year-old man developed a widespread erythematous eruption which rapidly evolved into fluid-filled bulla mostly involving the distal areas of all four limbs and erosions on the oral as well as anogenital mucosa. Based on clinical presentation, chronology of drug exposure, past events and histopathology as diagnosis of widespread bullous fixed drug eruption was made over Steven Johnson-toxic epidermal necrolysis syndrome. Steroids were deferred and the lesions healed with minimal pigmentation within a week. Differentiating between the two entities has been historically difficult, and yet can have significant therapeutic and prognostic implications.

  19. Cat Scratch Disease: Expanded Spectrum

    PubMed Central

    Aziz, Hassan A.; Plesec, Thomas P.; Sabella, Camille; Udayasankar, Unni K.; Singh, Arun D.

    2016-01-01

    Background To expand the spectrum of ophthalmic manifestations in cat scratch disease. Methods Case report. Results A 7-year-old male was referred for evaluation of his left optic disc after failing vision screening test at school. His visual acuity was 20/20 OD and light perception OS. Fundus examination showed a left optic disc lesion associated with an exudative retinal detachment and vitreous seeding. Ultrasonography revealed a 7 × 7.5 × 3.8 mm lesion with a possible 6.3 mm of retrolaminar extension into the substance of the optic nerve. Brain MRI did not show evidence of optic nerve involvement but revealed a 6-mm nodule of the pineal gland suggestive of a pineoblastoma. Enucleation was performed and histopathology revealed a suppurative granulomatous inflammation suggestive of Bartonella infection. Upon further questioning, the patient had recent exposure to kittens with areas of cat scratches along both of his arms. He was subsequently referred to and treated with a 2-week course of trimethoprim-sulfamethoxazole and rifampin by the pediatric infectious disease specialist. Repeat brain MRI showed interval total resolution of enlarged pineal gland. Conclusion: Optic nerve granulomas are a rare presentation of cat scratch disease and could potentially masquerade as retinoblastoma. PMID:27843905

  20. Male contraception: expanding reproductive choice.

    PubMed

    Rajalakshmi, M

    2005-11-01

    The development of steroid-based oral contraceptives had revolutionized the availability of contraceptive choice for women. In order to expand the contraceptive options for couples by developing an acceptable, safe and effective male contraceptive, scientists have been experimenting with various steroidal/non-steroidal regimens to suppress testicular sperm production. The non-availability of a long-acting androgen was a limiting factor in the development of a male contraceptive regimen since all currently tested anti-spermatogenic agents also concurrently decrease circulating testosterone levels. A combination regimen of long-acting progestogen and androgen would have advantage over an androgen-alone modality since the dose of androgen required would be much smaller in the combination regimen, thereby decreasing the adverse effects of high steroid load. The progestogen in the combination regimen would act as the primary anti-spermatogenic agent. Currently, a number of combination regimens using progestogen or GnRH analogues combined with androgen are undergoing trials. The side effects of long-term use of androgens and progestogens have also undergone evaluation in primate models and the results of these studies need to be kept in view, while considering steroidal regimens for contraceptive use in men. Efforts are also being made to popularize non-scalpel vasectomy and to develop condoms of greater acceptability. The development of contraceptive vaccines for men, using sperm surface epitopes not expressed in female reproductive tract as source, still requires considerable research efforts.