ERIC Educational Resources Information Center
Sullivan, Ellen Wahl
This document contains chapter 9 of the final report of the Project on Social Architecture in Education. Chapter 9 is about a regional experimental high school program for the arts. Several features distinguished Arts Co-op from the other schools in the study. For one, it was a special purpose school, focused on the arts, and not offering a…
Tips for Plant-Incorporated Protectant (PIP) Experimental Use Permit (EUP) Program Submission
Includes information to include in program description and final program report, recommendations for calculating acreage, use of seed produced under PIP EUPs, consultation with Biopesticides and Pollution Prevention Division.
Interactive program for analysis and design problems in advanced composites technology
NASA Technical Reports Server (NTRS)
Cruse, T. A.; Swedlow, J. L.
1971-01-01
During the past year an experimental program in the fracture of advanced fiber composites has been completed. The experimental program has given direction to additional experimental and theoretical work. A synthesis program for designing low weight multifastener joints in composites is proposed, based on extensive analytical background. A number of failed joints have been thoroughly analyzed to evaluate the failure hypothesis used in the synthesis procedure. Finally, a new solution is reported for isotropic and anisotropic laminates using the boundary-integral method. The solution method offers significant savings of computer core and time for important problems.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Turner, L.R.; Praeg, W.F.
1982-03-01
The experimental requirements, test-bed design, and computational requirements are reviewed and updated. Next, in Sections 3, 4 and 5, the experimental plan, instrumentation, and computer plan, respectively, are described. Finally, Section 6 treats other considerations, such as personnel, outside participation, and distribution of results.
ERIC Educational Resources Information Center
Simon, Charles W.
A major part of the Naval Training Equipment Center's Aviation Wide Angle Visual System (AWAVS) program involves behavioral research to provide a basis for establishing design criteria for flight trainers. As part of the task of defining the purpose and approach of this program, the applications of advanced experimental methods are explained and…
ERIC Educational Resources Information Center
Tekerci, Hacer; Kandir, Adalet
2017-01-01
Purpose: This study aimed to examine the effects of the Sense-Based Science Education Program on 60-66 months old children's scientific process skills. Research Methods: In this study, which carries experimental attribute features, the pre-test/final-test/observing-test control grouped experimental pattern, and qualitative research were used.…
ERIC Educational Resources Information Center
Miles, David T.
The purpose of this first phase of a continuing research program was the development of a test of creative problem solving in general design. A design class of 186 members was divided into an experimental and control group; a non-design control group (an educational psychology class) of 45 was also tested. Multivariate interpretation of creative…
ERIC Educational Resources Information Center
Griffith, William S.; And Others
This document, consisting of seven chapters and 12 appendixes, is a full final report of the Doolittle Family Education Center Experimental In-Service Training Project. Chapter II consists of the history and plan of the project including an explanation of the framework of the model that was used to conceptualize the project. Chapter III is a…
ERIC Educational Resources Information Center
Coleman, Thomas; Langberg, George
An experimental public school speech therapy program is described, which offers automated, programed instruction in sound production and auditory training. The experiment includes self-teaching methods, as well as utilization of paraprofessional personnel under the supervision of a qualified speech therapist. Although the automated program was…
Experimental Characterization of Nonlinear Viscoelastic and Adhesive Properties of Elastomers
2006-07-27
Final report to the Office of Naval Research on the Experimental Characterization of Nonlinear Viscoelastic and Adhesive Properties of Elastomers ...Experimental Characterization of Nonlinear Viscoelastic and Adhesive Properties of Elastomers 5b. GRANT NUMBER N000 14-1-0400 5c. PROGRAM ELEMENT...Experimental Characterization of Nonlinear Viscoelastic and Adhesive Properties of Elastomers Principal Investigator K. Ravi-Chandar Organization The University
ERIC Educational Resources Information Center
Boettcher, Kenneth D.
American River College (Calif.) devised an experimental program in remedial English intended to better prepare entering freshmen. It was given by open-circuit TV simultaneously to high school seniors and junior college freshmen in the hope that, in subsequent years, there would be fewer inadequately prepared freshmen and that more could enroll…
Workshop of the Experimental Project on Programmed Instruction in Asia. Final Report.
ERIC Educational Resources Information Center
United Nations Educational, Scientific, and Cultural Organization, Paris (France).
The present situation and future trends of programed learning in Ceylon, Republic of China, India, Indonesia, Japan, Republic of Korea, Malaysia, Pakistan, Philippines, Singapore, Thailand, and Republic of Viet-Nam are described by the Workshop participants. Some of the unique features of programed learning are examined with respect to the…
Quiet Clean Short-Haul Experimental Engine (QCSEE) Under-the-Wing (UTW) Final Design Report
NASA Technical Reports Server (NTRS)
1977-01-01
The QCSEE Program provides for the design, fabrication, and testing of two experimental high-bypass geared turbofan engines and propulsion systems for short-haul passenger aircraft. The overall objective of the program is to develop the propulsion technology required for future externally blown flap types of aircraft with engines located both under-the-wing and over-the-wing. This technology includes work in composite structures and digital engine controls.
ERIC Educational Resources Information Center
Bernstein, Lawrence; Rappaport, Catherine Dun; Olsho, Lauren; Hunt, Dana; Levin, Marjorie
2009-01-01
This report summarizes the findings from a national evaluation of mentoring programs funded under the U.S. Department of Education's Student Mentoring Program. The impact evaluation used an experimental design in which students were randomly assigned to a treatment or control group. Thirty-two purposively selected School Mentoring Programs and…
ERIC Educational Resources Information Center
GOHEEN, ROYAL L.
THREE PHYSICAL EDUCATION PROGRAMS, SKILL-ORIENTED, PLAY- ORIENTED, AND FREE-PLAY ORIENTED WERE DEVELOPED. THESE PROGRAMS WERE EXAMINED, INITIALLY, BY SEVEN EXPERTS AND THEN SUBJECTED TO A PILOT STUDY. THE REVISED PROGRAMS WERE TAUGHT BY RESEARCH ASSISTANTS TO SIX EXPERIMENTAL GROUPS WHICH INCLUDED 82 BOYS AT TWO STATE SCHOOLS FOR THE MENTALLY…
Experimental aeroelasticity history, status and future in brief
NASA Technical Reports Server (NTRS)
Ricketts, Rodney H.
1990-01-01
NASA conducts wind tunnel experiments to determine and understand the aeroelastic characteristics of new and advanced flight vehicles, including fixed-wing, rotary-wing and space-launch configurations. Review and assessments are made of the state-of-the-art in experimental aeroelasticity regarding available facilities, measurement techniques, and other means and devices useful in testing. In addition, some past experimental programs are described which assisted in the development of new technology, validated new analysis codes, or provided needed information for clearing flight envelopes of unwanted aeroelastic response. Finally, needs and requirements for advances and improvements in testing capabilities for future experimental research and development programs are described.
78 FR 36677 - Radio Experimentation and Market Trials-Streamlining Rules
Federal Register 2010, 2011, 2012, 2013, 2014
2013-06-19
... Experimentation and Market Trials--Streamlining Rules AGENCY: Federal Communications Commission. ACTION: Final rule. SUMMARY: In this document the Commission modifies on its own motion the rules adopted in this... being conducted under a program, medical testing, and compliance testing license. Thus, this action will...
High Alpha Technology Program (HATP) ground test to flight comparisons
NASA Technical Reports Server (NTRS)
Hall, R. M.; Banks, D. W.; Fisher, David F.; Ghaffari, F.; Murri, D. G.; Ross, J. C.; Lanser, Wendy R.
1994-01-01
This status paper reviews the experimental ground test program of the High Alpha Technology Program (HATP). The reasons for conducting this ground test program had their origins during the 1970's when several difficulties were experienced during the development programs of both the F-18 and F-16. A careful assessment of ground test to flight correlations appeared to be important for reestablishing a high degree of confidence in our ground test methodology. The current paper will then focus on one aspect of the HATP program that is intended to improve the correlation between ground test and flight, high-alpha gritting. The importance of this work arises from the sensitivity of configurations with smooth-sided forebodies to Reynolds number. After giving examples of the effects of Reynolds number, the paper will highlight efforts at forebody gritting. Finally, the paper will conclude by summarizing the charter of the HATP Experimental Aerodynamics Working Group and future experimental testing plans.
WTO — a deterministic approach to 4-fermion physics
NASA Astrophysics Data System (ADS)
Passarino, Giampiero
1996-09-01
The program WTO, which is designed for computing cross sections and other relevant observables in the e+e- annihilation into four fermions, is described. The various quantities are computed over both a completely inclusive experimental set-up and a realistic one, i.e. with cuts on the final state energies, final state angles, scattering angles and final state invariant masses. Initial state QED corrections are included by means of the structure function approach while final state QCD corrections are applicable in their naive formulation. A gauge restoring mechanism is included according to the Fermion-Loop scheme. The program structure is highly modular and particular care has been devoted to computing efficiency and speed.
DOT National Transportation Integrated Search
1982-01-01
This study evaluated the impact of the four basic treatment combinations of the rehabilitation component of the Virginia driver improvement program. This was accomplished through a comparison of the driving records of experimental group subjects who ...
HUMAN DEVELOPMENT PROJECT, 1965-1966. FINAL REPORT.
ERIC Educational Resources Information Center
Richmond Public Schools, VA.
THIS FINAL REPORT IS AN EVALUATION OF A COMPENSATORY EDUCATION PROJECT IN RICHMOND, VIRGINIA. DATA ARE DERIVED FROM TEACHERS' RESPONSES TO A QUESTIONNAIRE, FROM A REPORT ON THE ACADEMIC PERFORMANCE OF PUPILS IN THE 1965 SUMMER PROGRAM, AND FROM AN ANALYSIS OF STANDARDIZED ACHIEVEMENT TEST RESULTS IN EXPERIMENTAL AND CONTROL SCHOOLS. THE REPORT…
Final Report May 1, 2012 to May 31, 2015: "Theoretical Studies in Elementary Particle Physics"
DOE Office of Scientific and Technical Information (OSTI.GOV)
Collins, John C.; Roiban, Radu
2015-08-19
This final report summarizes work at Penn State University from May 1, 2012 to May 31, 2015. The work was in theoretical elementary particle physics. Many new results in perturbative QCD, in string theory, and in related areas were obtained, with a substantial impact on the experimental program.
ESEA Title III Special Education Projects: Fiscal Year 1970. Final Evaluation Report.
ERIC Educational Resources Information Center
Vails, Lavolia W.; And Others
Five experimental programs in the District of Columbia, which were implemented in 1968-69 and have served 116 handicapped children, are evaluated. The programs provided individualized instruction for aphasic, rubella, severely mentally retarded, seriously emotionally handicapped, and multiply handicapped children. A summary and a consultant's…
ERIC Educational Resources Information Center
Stewart, Joseph L.
Two groups of hard of hearing children entered educational audiology programs between the ages of 6 to 42 months. Of these, 12 children in a unisensory program (U-) and 16 in a multisensory program (M-) were evaluated for speech and language development after they had reached their fifth birthdays. Children in the experimental U-group were first…
ERIC Educational Resources Information Center
Syracuse Univ., NY. Div. of Special Education and Rehabilitation.
An evaluation of the costs of serving handicapped children in Head Start was based on information collected in conjunction with on-site visits to regular Head Start programs, experimental programs, and specially selected model preschool programs, and from questionnaires completed by 1,353 grantees and delegate agencies of regular Head Start…
Study of the Vermont Manpower Experimental and Demonstration Program. Final Report.
ERIC Educational Resources Information Center
Vermont State Employment Service, Montpelier. Dept. of Employment Security.
The purpose of this experimental and demonstration project was to provide work experience to unemployed, low-income clients to improve their employability so they can be moved into permanent, unsubsidized employment. Changes of attitudes and motivations as a result of project experience were studied. Study findings indicated that the post-project…
Apollo LM guidance computer software for the final lunar descent.
NASA Technical Reports Server (NTRS)
Eyles, D.
1973-01-01
In all manned lunar landings to date, the lunar module Commander has taken partial manual control of the spacecraft during the final stage of the descent, below roughly 500 ft altitude. This report describes programs developed at the Charles Stark Draper Laboratory, MIT, for use in the LM's guidance computer during the final descent. At this time computational demands on the on-board computer are at a maximum, and particularly close interaction with the crew is necessary. The emphasis is on the design of the computer software rather than on justification of the particular guidance algorithms employed. After the computer and the mission have been introduced, the current configuration of the final landing programs and an advanced version developed experimentally by the author are described.
ERIC Educational Resources Information Center
Vera Inst. of Justice, New York, NY.
The final report of an experimental pre-trial intervention program of intensive manpower services (individual and group counseling and job, training, or academic placement with the help of career developers) for selected defendants in Manhattan covers the period November 1967 through October 1970. After three years and 1,300 participants,…
DOT National Transportation Integrated Search
1978-12-01
This study is the final phase of a muck pipeline program begun in 1973. The objective of the study was to evaluate a pneumatic pipeline system for muck haulage from a tunnel excavated by a tunnel boring machine. The system was comprised of a muck pre...
Object-oriented programming for the biosciences.
Wiechert, W; Joksch, B; Wittig, R; Hartbrich, A; Höner, T; Möllney, M
1995-10-01
The development of software systems for the biosciences is always closely connected to experimental practice. Programs must be able to handle the inherent complexity and heterogeneous structure of biological systems in combination with the measuring equipment. Moreover, a high degree of flexibility is required to treat rapidly changing experimental conditions. Object-oriented methodology seems to be well suited for this purpose. It enables an evolutionary approach to software development that still maintains a high degree of modularity. This paper presents experience with object-oriented technology gathered during several years of programming in the fields of bioprocess development and metabolic engineering. It concentrates on the aspects of experimental support, data analysis, interaction and visualization. Several examples are presented and discussed in the general context of the experimental cycle of knowledge acquisition, thus pointing out the benefits and problems of object-oriented technology in the specific application field of the biosciences. Finally, some strategies for future development are described.
ERIC Educational Resources Information Center
Manpower Administration (DOL), Washington, DC.
The capabilities of Title I of the Manpower Development and Training Act have been used for several years to fund experimental and demonstration projects for the prerelease training of prisoners. Four conferences on Manpower Development and Training in correctional institutions were sponsored to bring together the basic groups of people charged…
Slurry combustion. Volume 2: Appendices, Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Essenhigh, R.
1993-06-01
Volume II contains the following appendices: coal analyses and slurryability characteristics; listings of programs used to call and file experimental data, and to reduce data in enthalpy and efficiency calculations; and tabulated data sets.
NASA Technical Reports Server (NTRS)
Freeman, Delman C., Jr.; Reubush, Daivd E.; McClinton, Charles R.; Rausch, Vincent L.; Crawford, J. Larry
1997-01-01
This paper provides an overview of NASA's Hyper-X Program; a focused hypersonic technology effort designed to move hypersonic, airbreathing vehicle technology from the laboratory environment to the flight environment. This paper presents an overview of the flight test program, research objectives, approach, schedule and status. Substantial experimental database and concept validation have been completed. The program is currently concentrating on the first, Mach 7, vehicle development, verification and validation in preparation for wind-tunnel testing in 1998 and flight testing in 1999. Parallel to this effort the Mach 5 and 10 vehicle designs are being finalized. Detailed analytical and experimental evaluation of the Mach 7 vehicle at the flight conditions is nearing completion, and will provide a database for validation of design methods once flight test data are available.
Evaluation Reports of ESEA, Title III Projects: Final Report, FY 1972.
ERIC Educational Resources Information Center
District of Columbia Public Schools, Washington, DC. Dept. of Research and Evaluation.
Through Title III of the Elementary Secondary Education Act of 1965, six programs were funded in Washington, D.C. public schools to meet the educational needs of handicapped disadvantaged children. One of the programs, the Columbia Road Pre-School Pilot Project was designed to serve as an experimental model for early childhood education for…
2001-08-30
Body with Thermo-Chemical destribution of Heat-Protected System . In: Physical and Gasdynamic Phenomena in Supersonic Flows Over Bodies. Edit. By...Final Report on ISTC Contract # 1809p Parametric Study of Advanced Mixing of Fuel/Oxidant System in High Speed Gaseous Flows and Experimental...of Advanced Mixing of Fuel/Oxidant System in High Speed Gaseous Flows and Experimental Validation Planning 5c. PROGRAM ELEMENT NUMBER 5d. PROJECT
Wolchik, Sharlene A; Schenck, Clorinda E; Sandler, Irwin N
2009-12-01
This article focuses on the contributions that the program of research on the New Beginnings Program (NBP) has made to understanding pathways to resilience in youth who experience parental divorce. First, the research demonstrating that divorce increases risk for mental health, physical health, and social adaptation problems is reviewed. Next, theory and research linking social environmental-level and youth-level modifiable risk factors and resilience resources to youth's postdivorce adjustment are presented. The conceptual framework underlying the NBP and the risk factors and resilience resources targeted in this program are described next. The short-term and long-term results of two experimental, randomized efficacy trials of the NBP and moderators and mediators of its effects are then presented. Analyses that examine whether youth self-systems beliefs account for the links between program-induced changes in family-level resilience resources and positive long-term program on adaptation outcomes are presented and how experimental trials can be used to further theories of resilience for youth facing adversities is discussed. The final section describes directions for future research on the NBP.
Wolchik, Sharlene A.; Schenck, Clorinda E.; Sandler, Irwin N.
2009-01-01
This article focuses on the contributions that the program of research on the New Beginnings Program (NBP) has made to understanding pathways to resilience in youth who experience parental divorce. First, the research demonstrating that divorce increases risk for mental health, physical health and social adaptation problems is reviewed. Next, theory and research linking social environmental-level and youth-level modifiable risk factors and resilience resources to youth’s post-divorce adjustment are presented. The conceptual framework underlying the NBP and the risk factors and resilience resources targeted in this program are described next. The short-term and long-term results of two experimental, randomized efficacy trials of the NBP and moderators and mediators of its effects are then presented. Analyses that examine whether youth self-systems beliefs account for the links between program-induced changes in family-level resilience resources and positive long-term program on adaptation outcomes are presented and how experimental trials can be used to further theories of resilience for youth facing adversities is discussed. The final section describes directions for future research on the NBP. PMID:19807862
Zero Robotics at Kennedy Space Center Visitor Complex
2017-08-11
Students and their sponsors gather for a commemorative photo in the Center for Space Education at NASA’s Kennedy Space Center in Florida after participating in the finals of the Zero Robotics Middle School Summer Program national championship. The five-week program allows rising sixth- through ninth-graders to write programs for small satellites called SPHERES (Synchronized, Position, Hold, Engage, Reorient, Experimental Satellites). Finalists saw their code tested aboard the International Space Station.
ERIC Educational Resources Information Center
Corrin, William; Lindsay, James J.; Somers, Marie-Andree; Myers, Nathan E.; Meyers, Coby V.; Condon, Christopher A.; Smith, Janell K.
2012-01-01
This report presents the findings of a rigorous experimental impact evaluation and implementation study of one such intervention, the Content Literacy Continuum (CLC), developed by researchers at the University of Kansas Center for Research on Learning. This evaluation of CLC was conducted by three partnering organizations: REL Midwest, MDRC, and…
ERIC Educational Resources Information Center
Toby, Megan; Jaciw, Andrew; Ma, Boya; Lipton, Akiko
2011-01-01
PCI Education conducted a three-year longitudinal study to determine the comparative effectiveness of the "PCI Reading Program" ("PCI") for students with severe disabilities as implemented in Florida's Brevard Public Schools and Miami-Dade County Public Schools. The primary question addressed by the study is whether students…
An Evaluation of the Language Arts Program of the District of Columbia. Final Report.
ERIC Educational Resources Information Center
Dailey, John T.; Neyman, Clinton A., Jr.
In an evaluation of a language arts program for oral and written facility and comprehension among children of an urban culture, 262 children in kindergarten comprised the experimental group, and 369 students served as controls. Children in both groups were presented with three pictures and instructed to tell a story about each. Observers rated…
ERIC Educational Resources Information Center
Medical and Health Research Association of New York City, Inc., NY.
To arrange a program that would enable nurse's aides to undertake licensed practical nurse (LPN) training without financial sacrifice, a 3-year experimental and demonstration project, funded by the Manpower Administration, was conducted in New York City between October 1967 and September 1969. Through a work-study arrangement, 422 nurse's aides in…
ERIC Educational Resources Information Center
JAQUITH, CHARLES E.; AND OTHERS
BASIC OBJECTIVES OF THIS EXPERIMENT WERE TO USE TEAM TEACHING BY TV TO HELP STUDENTS GAIN A REALISTIC VIEW OF THE INDUSTRIAL PROCESS AND OF THE IMPORTANCE OF EDUCATION AND TRAINING FOR PARTICIPATION IN THAT PROCESS. GRADE EIGHT STUDENTS IN AN INDUSTRIAL COMMUNITY WERE PLACED IN AN EXPERIMENTAL AND A CONTROL GROUP, AND EXPOSED TO INSTRUCTION FROM…
AeroValve Experimental Test Data Final Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Noakes, Mark W.
This report documents the collection of experimental test data and presents performance characteristics for the AeroValve brand prototype pneumatic bidirectional solenoid valves tested at the Oak Ridge National Laboratory (ORNL) in July/August 2014 as part of a validation of AeroValve energy efficiency claims. The test stand and control programs were provided by AeroValve. All raw data and processing are included in the report attachments.
Castilho, Aline Rogéria Freire de; Marta, Sara Nader
2010-10-01
The objective of this work was to verify the incidence of dental caries by means of the CPO-D, CPO-S, ceo-d and ceo-s indexes in patients with Down syndrome regularly enrolled in a preventive program. Twenty four Down syndrome patients of both sexes age range of one to 48 years were examined. The prevalence (initial experimental situation) and incidence (final experimental situation) of dental caries were verified using of the initial and final CPO-D, CPO-S, ceo-d and ceo-s indexes of the participants. From 24 individual examined, 10 (42.0%) were free of caries. The prevalence of dental caries showed values of CPO-D= 2.33; CPO-S= 3.60; ceo-d= 1.75 e ceo-s= 2.80; while the incidence of caries showed values of 2.33; 3.80; 1.10 e 1.90, respectively. Down syndrome individuals evaluated in this study presented low level of caries and small incidence of new lesions, emphasizing the importance of the maintenance of these patients at preventive programs.
Ma, Wei-Fen; Wu, Po-Lun; Su, Chia-Hsien; Yang, Tzu-Ching
2017-05-01
The purpose of this study was to evaluate the effects of a home-based (HB) exercise program on anxiety levels and metabolic functions in patients with anxiety disorders in Taiwan. Purposive sampling was used to recruit 86 participants for this randomized, experimental study. Participants were asked to complete a pretest before the 3-month exercise program, a posttest at 1 week, and a follow-up test at 3 months after the exercise program. Study measures included four Self-Report Scales and biophysical assessments to collect and assess personal data, lifestyle behaviors, anxiety levels, and metabolic control functions. Of the 86 study participants, 83 completed the posttest and the 3-month follow-up test, including 41 in the experimental group and 42 in the control group. Participants in the experimental group showed significant improvements in body mass index, high-density lipoprotein cholesterol levels, and the level of moderate exercise after the program relative to the control group, as analyzed by generalized estimating equations mixed-model repeated measures. State and trait anxiety levels were also significantly improved from pretest to follow-up test in the experimental group. Finally, the prevalence of metabolic syndrome declined for participants in the experimental group. The HB exercise program produced positive effects on the metabolic indicators and anxiety levels of Taiwanese adults with anxiety disorders. Health providers should consider using similar HB exercise programs to help improve the mental and physical health of patients with anxiety disorders in their communities.
A Report on the 2007 Outfield Variety Test
USDA-ARS?s Scientific Manuscript database
Outfield variety trials, the final testing stage in the Louisiana Variety Development Program, are evaluated cooperatively by the USDA Agricultural Research Service, Louisiana State University Agricultural Center, and American Sugar Cane League. Advanced experimental varieties as well as current co...
ERIC Educational Resources Information Center
Wesche, Marjorie; MacFarlane, Alina; Peters, Martine
This report describes an experimental intensive core French program for grades 5 and 6 at Churchill Alternative School in Ottawa (Canada). The aim was to improve the oral French skills of core French students by providing a period of intensive exposure to French and by increasing the total number of hours in French during one program year from 120…
ERIC Educational Resources Information Center
Weinstock, Phyllis; Bos, Johannes; Tseng, Fannie; Rosenthal, Emily; Ortiz, Lorena; Dowsett, Chantelle; Huston, Aletha; Bentley, Alison
2012-01-01
Little research has been conducted on the effectiveness of training strategies for child care providers. The current study used an experimental intent-to-treat design to measure the impact of an established intervention, the on-site caregiver training component of the Program for Infant/Toddler Care (PITC), on child development and child care…
ERIC Educational Resources Information Center
Smetana, Frederick O.; Phillips, Dennis M.
In an effort to increase dissemination of scientific and technological information, a program was undertaken whereby graduate students in science and engineering could request a computer-produced bibliography and/or abstracts of documents identified by the computer. The principal resource was the National Aeronautics and Space Administration…
García, Juan P. F.; Giraldo, Víctor M. A.; Barrado, José J. G.; Casasola, César D.
2013-01-01
The aims of this study were to measure the effects of a cardiac rehabilitation program based on a modification of a sport (tennis) on quality of life, on various laboratory test parameters and on an exercise stress test, and to determine if the results of this novel activity are equivalent to those of traditional programs (i.e., the use of the bicycle ergometer). The sample consisted of 79 patients with a low-risk acute coronary syndrome. They were divided into three groups: two experimental groups and one control group. One of the experimental groups used the bicycle ergometer as its main physical activity, whereas the other received training in a modified form of tennis lesson. By the end of the 3-month program, triglycerides, cholesterol LDL, cholesterol HDL, (-25 mg·dl-1 and 32.3 mg·dl-1 final, and 15.7 mg·dl-1 and 23.3 mg·dl-1 LDL final, respectively) and exercise capacity improved significantly (by 1.1 metabolic equivalents (METs) and 1.2 METs, respectively), in both experimental groups. We conclude that the application of a comprehensive cardiac rehabilitation program in patients with low-risk acute coronary syndrome based on a program of modified tennis improves exercise tolerance and metabolic parameters, as well as certain physical characteristics that reduce cardiovascular risk. Key Points Cardiac rehabilitation of low risk patients with acute coronary syndrome based on a program of modified tennis produces an improvement in quality of life, lipid profiles and in exercise tolerance A cardiac rehabilitation program based on a modification of tennis produces favourable changes in various anthropometric parameters related to the reduction of cardiovascular risk The development of programs of cardiac rehabilitation based on modified versions of various sports would advantage the adherence to physical exercise. PMID:24149811
Zero Robotics at Kennedy Space Center Visitor Complex
2017-08-11
NASA Kennedy Space Center Associate Director Kelvin Manning speaks to students and sponsors in the spaceport’s Center for Space Education. Teams from across the state of Florida were gathered at Kennedy for the finals of the Zero Robotics Middle School Summer Program national championship. The five-week program allows rising sixth- through ninth-graders to write programs for small satellites called SPHERES (Synchronized, Position, Hold, Engage, Reorient, Experimental Satellites). Finalists saw their code tested aboard the International Space Station.
Zero Robotics at Kennedy Space Center Visitor Complex
2017-08-11
Students and sponsors hear from astronauts aboard the International Space Station on a big screen in the Center for Space Education at NASA’s Kennedy Space Center in Florida. Teams from across the state of Florida were gathered at Kennedy for the finals of the Zero Robotics Middle School Summer Program national championship. The five-week program allows rising sixth- through ninth-graders to write programs for small satellites called SPHERES (Synchronized, Position, Hold, Engage, Reorient, Experimental Satellites). Finalists saw their code tested aboard the orbiting laboratory.
The Midden Mound Project. Report of Investigations Number 6
1987-01-01
SUMAR OF THE RSEARCH DMIGN In the six and one-half years of this project, there have been tmo developmental stages or refinements of the research design ...character of the finished tool assemblage. The midden mound experimental program was designed , in part, to document the manufacturing strategies for...not have been the same during various prehistoric time periods and in the experimental design ; and, finally, sampling may be a problem. USE-WEAR
DOT National Transportation Integrated Search
2002-05-01
A two part laboratory experimental program was conducted to evaluate strength and durability of various concrete mix : designs. In Part I of the study, the influence of using Grade 120 ground granulated blast furnace slag (GGBFS) on the : strength an...
Mayorga-Vega, Daniel; Merino-Marban, Rafael; Manzano-Lagunas, Jorge; Blanco, Humberto; Viciana, Jesús
2016-01-01
The main purpose of the present study was to examine the effects of a physical education-based stretching development and maintenance program on hamstring extensibility in schoolchildren. A sample of 150 schoolchildren aged 7-10 years old from a primary school participated in the present study (140 participants were finally included). The six classes balanced by grade were cluster randomly assigned to the experimental group 1 (n = 51), experimental group 2 (n = 51) or control group (n = 49) (i.e., a cluster randomized controlled trial design was used). During the physical education classes, the students from the experimental groups 1 and 2 performed a four-minute stretching program twice a week for nine weeks (first semester). Then, after a five-week period of detraining coinciding with the Christmas holidays, the students from the experimental groups 1 and 2 completed another stretching program twice a week for eleven weeks (second semester). The students from the experimental group 1 continued performing the stretching program for four minutes while those from the experimental group 2 completed a flexibility maintenance program for only one minute. The results of the two-way analysis of variance showed that the physical education-based stretching development program significantly improved the students’ hamstring extensibility (p < 0.001), as well as that these gains obtained remained after the stretching maintenance program (p < 0.001). Additionally, statistically significant differences between the two experimental groups were not found (p > 0.05). After a short-term stretching development program, a physical education-based stretching maintenance program of only one-minute sessions twice a week is effective in maintaining hamstring extensibility among schoolchildren. This knowledge could help and guide teachers to design programs that allow a feasible and effective development and maintenance of students’ flexibility in the physical education setting. Key points A physical education-based stretching maintenance program of only one-minute sessions twice a week is effective in maintaining hamstring extensibility among schoolchildren. A four-minute maintenance program shows similar effects that the one-minute maintenance program on hamstring extensibility among schoolchildren. Physical education teachers and other practitioners could carry out one-minute programs for a feasible and effective maintenance of students’ flexibility. PMID:26957928
NASA Technical Reports Server (NTRS)
Campbell, D. B.
1973-01-01
This study reports the design, implementation, and evaluation of a program attempting to reduce job stress by improving person-environment fit with respect to job aspects such as work load, responsibility, and interpersonal relationships. In order to assess the effects of the program, measures of both stress and strain were collected at three points in time--just prior to the program, immediately after the program, and three months after completion of the program. Measures of strain included systolic and diastolic blood pressure, determinations of glucose, cholesterol, and uric acid in the plasma, job satisfaction, and job related self-esteem. The findings were interpreted in light of both program incidents within specific experimental groups and general aspects of the program common to the experimental groups. Additional analyses indicated that both good person-environment fit with respect to participation predicts to good fit with respect to other job aspects over a three month interval and that stress causes strain, rather than the reverse.
NASA Technical Reports Server (NTRS)
Hudson, Susan T.; Zoladz, Thomas F.; Griffin, Lisa W.; Turner, James E. (Technical Monitor)
2000-01-01
Understanding the unsteady aspects of turbine rotor flowfields is critical to successful future turbine designs. A technology program was conducted at NASA's Marshall Space Flight Center to increase the understanding of unsteady environments for rocket engine turbines. The experimental program involved instrumenting turbine rotor blades with surface-mounted high frequency response pressure transducers. The turbine model was then tested to measure the unsteady pressures on the rotor blades. The data obtained from the experimental program is unique in three respects. First, much more unsteady data was obtained (several minutes per set point) than has been possible in the past. Also, two independent unsteady data acquisition systems and fundamental signal processing approaches were used. Finally, an extensive steady performance database existed for the turbine model. This allowed an evaluation of the effect of the on-blade instrumentation on the turbine's performance. This unique data set, the lessons learned for acquiring this type of data, and the improvements made to the data analysis and prediction tools will contribute to future turbine programs such as those for reusable launch vehicles.
Roadmap for the Hypersonics Programs of the Department of Defense
2008-02-01
development and integration of a 1MW e-bean system to provide the necessary energy into the wind tunnel flow field to enable longer duration experiments at...acquired. Finally, “Test and Evaluation” (T&E) is defined as tests and experiments in support of research development and acquisition of systems...Research Experimentation (HIFiRE) project, the DARPA/AF Falcon program, and the DoD Next Generation Launch planning activities. 13 Joint
DOE Office of Scientific and Technical Information (OSTI.GOV)
Syring, R.P.; Grubb, R.L.
1979-09-30
This document reports on the following: (1) experimental determination of the response of 16 basic structural elements and 7 B-52 components to simulated nuclear overpressure environments (utilizing Sandia Corporation's Thunderpipe Shock Tube), (2) analysis of these test specimens utilizing the NOVA-2 computer program, and (3) correlation of test and analysis results.
ERIC Educational Resources Information Center
Zumbrunn, Karen Lee Fanta
A study was conducted to determine the effect of a taped, guided listening program of contemporary music on students' understanding of other styles of music. Of the 720 students selected for the study from San Francisco junior high schools, 226 were placed in an experimental group which received 18 one-half hour taped listening lessons of…
Kirag, Nukhet; Temel, Ayla Bayik
2018-01-01
INTRODUCTION: Undiagnosed and uncorrected refractive errors in childhood can negatively affect the development of vision and cause students to have low academic success and even quit school before graduation. This study aims to determine the effects of an eye health promotion program on the health protective behaviors of primary school students. MATERIALS AND METHODS: This experimental study using a pretest-posttest design with a control group was conducted in three public primary schools in Aydın, a city in the Western Anatolia Region of Turkey, between April and November 2014. The eye health promotion program was provided by the researchers to the experimental Group 2 days in 4 weeks. The data were analyzed using the t-test, Chi-square analysis, the Mann–Whitney U-test, the Wilcoxon signed-rank test, and the McNemar test. RESULTS: The average age of the students was identified as 9.0 ± 3.64 years. The students wearing glasses all in the experimental group and 53.3% in the control group were found to always wear their glasses after the education program was completed (P < 0.05). These students, 97.9% in the experimental group and 58.1% in the control group underwent eye examinations from an ophthalmologist (P < 0.05). The eye health protective behaviors of the experimental group were found to have positively changed in the final follow-up, compared to the control group (P < 0.05). CONCLUSION: The eye health promotion program was found to be effective in improving eye health protective behaviors within the experimental group. PMID:29619388
Zero Robotics at Kennedy Space Center Visitor Complex
2017-08-11
Darth Vader and other Star Wars characters from the 501st Legion address students and sponsors in the Center for Space Education at NASA’s Kennedy Space Center in Florida. Teams from across the state of Florida were gathered at Kennedy for the finals of the Zero Robotics Middle School Summer Program national championship. The five-week program allows rising sixth- through ninth-graders to write programs for small satellites called SPHERES (Synchronized, Position, Hold, Engage, Reorient, Experimental Satellites). Finalists saw their code tested aboard the International Space Station.
Zero Robotics at Kennedy Space Center Visitor Complex
2017-08-11
A middle-school student high-fives a Star Wars character from the 501st Legion in the Center for Space Education at NASA’s Kennedy Space Center in Florida. Teams from across the state of Florida were gathered at Kennedy for the finals of the Zero Robotics Middle School Summer Program national championship. The five-week program allows rising sixth- through ninth-graders to write programs for small satellites called SPHERES (Synchronized, Position, Hold, Engage, Reorient, Experimental Satellites). Finalists saw their code tested aboard the International Space Station.
Penetration with Long Rods: A Theoretical Framework and Comparison with Instrumented Impacts,
1980-06-01
theoretical framework for an experimental program is described. The theory of one dimensional wave propagation is used to show how data from instrumented long rods and targets may be fitted together to give a...the theoretical framework . In the final section the results to date are discussed.
MEDICAL LABORATORY ASSISTANT TEACHER EDUCATION INSTITUTE--PILOT PROGRAM. FINAL REPORT.
ERIC Educational Resources Information Center
COUCH, REX D.
AN INTERDISCIPLINARY GROUP COOPERATED IN PLANNING, CONDUCTING, AND EVALUATING A TEACHER EDUCATION INSTITUTE THAT WOULD OFFER THE OPPORTUNITY FOR TEACHER PARTICIPANTS TO IMPROVE THEIR TEACHING, PROVIDE AN EXPERIMENTAL APPROACH TO TEACHER TRAINING, AND SERVE AS A MODEL FOR OTHER TEACHER TRAINING INSTITUTES. BEHAVIORAL OBJECTIVES AND PARTICIPANT…
Production Techniques for Computer-Based Learning Material.
ERIC Educational Resources Information Center
Moonen, Jef; Schoenmaker, Jan
Experiences in the development of educational software in the Netherlands have included the use of individual and team approaches, the determination of software content and how it should be presented, and the organization of the entire development process, from experimental programs to prototype to final product. Because educational software is a…
DOT National Transportation Integrated Search
2009-03-01
"The primary objective of this research study was to evaluate the fracture mechanics properties of HMA concrete for Superpave mixtures. An experimental program was performed on asphalt mixtures with various types of materials. The laboratory testing ...
ILLINOIS VOCATIONAL EDUCATION OCCUPATIONAL RESEARCH AND DEVELOPMENT COORDINATING UNIT FINAL REPORT.
ERIC Educational Resources Information Center
BURGENER, V.E.
AN OCCUPATIONAL RESEARCH AND DEVELOPMENT UNIT WAS CREATED TO PROVIDE ASSISTANCE IN A STATEWIDE PROGRAM OF VOCATIONAL RESEARCH TO DEVELOP RESEARCH PERSONNEL, TO EVALUATE EXPERIMENTAL CURRICULUM AND INSTRUCTIONAL PROCEDURES, TO DEVELOP AN OVERVIEW OF SURVEY PROCEDURES RELATED TO OCCUPATIONAL OPPORTUNITIES AND TRAINING NEEDS, TO REFINE THE OPERATING…
DOT National Transportation Integrated Search
1975-02-01
This technical appendix presents an overview of the national pedestrian safety effort. The appendix also reports the results of a survey of 48 ongoing educational programs being conducted in eight U.S. urban centers. A final chapter suggests procedur...
Computer Assisted Teaching Comparisons with Handicapped. Final Report.
ERIC Educational Resources Information Center
Main, JoDell K.
A project was conducted to see if computer-assisted instruction could be used successfully with the low-level, non-reading adult. The experimental classroom group consisted of mentally handicapped and other educationally handicapped adults in adult basic education (ABE) programs. (Long-range implementation is aimed at ABE students who have a…
Educational Programming for Pupils with Neurologically Based Language Disorders. Final Report.
ERIC Educational Resources Information Center
Zedler, Empress Y.
To investigate procedures whereby schools may achieve maximal results with otherwise normal underachieving pupils with neurologically based language-learning disorders, 100 such subjects were studied over a 2-year period. Fifty experimental subjects remained in regular classes in school and received individualized teaching outside of school hours…
DOT National Transportation Integrated Search
2001-05-01
In 1995 and 1996 the Ohio Department of Transportation, in cooperation with the Federal Highway Administration and the Strategic Highway Research Program (SHRP), built a nearly 3.5 mile long Experimental Test Road in the median of the existing U.S. 2...
DOE R&D Accomplishments Database
1998-08-01
As noted in the historical summary, this program encountered a number of changes in direction, schedule, and scope over the period 11 January 1991 to 31 December 1998. The report provides a comprehensive summary of all the varied aspects of the program over its seven and a quarter years, and highlights those aspects that provide information beneficial to future radioisotope programs. In addition to summarizing the scope of the Cassini GPHS RTG Program provided as background, the introduction includes a discussion of the scope of the final report and offers reference sources for information on those topics not covered. Much of the design heritage of the GPHS RTG comes from the Multi Hundred Watt (MHW) RTGs used on the Lincoln Experimental Satellites (LES) 8/9 and Voyager spacecraft. The design utilized for the Cassini program was developed, in large part, under the GPHS RTG program which produced the Galileo and Ulysses RTGs. Reports from those programs included detailed documentation of the design, development, and testing of converter components and full converters that were identical to, or similar to, components used in the Cassini program.
Experimental Program Final Technical Progress Report: 15 February 2007 to 30 September 2012
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kinney, Edward R.
2014-09-12
This is the final technical report of the grant DE-FG02-04ER41301 to the University of Colorado at Boulder entitled "Intermediate Energy Nuclear Physics" and describes the results of our funded activities during the period 15 February 2007 to 30 September 2012. These activities were primarily carried out at Fermilab, RHIC, and the German lab DESY. Significant advances in these experiments were carried out by members of the Colorado group and are described in detail.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Syring, R.P.; Grubb, R.L.
1979-09-30
This document reports on the following: (1) experimental determination of the response of 16 basic structural elements and 7 B-52 components to simulated nuclear overpressure environments (utilizing Sandia Corporation's Thunderpipe Shock Tube), (2) analysis of these test specimens utilizing the NOVA-2 computer program, and (3) correlation of test and analysis results.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Humphrey, J.A.C.
1982-01-01
A summary is provided of the first of three years of experimental and theoretical research on free-forced convection flows in cavity-type solar receivers. New experimental and theoretical results are presented and discussed. The implication of these findings, with respect to the future thrust of the research program, is clarified as well as is possible at the present time. Following various related conclusions a summary and tentative schedule of work projected for year two of research are presented.
Thomann, J M; Gasser, P; Bres, E F; Voegel, J C; Gramain, P
1990-02-01
An ion-selective electrode and microcomputer-based experimental setup for the study of ionic-exchange kinetics between a powdered solid and the solution is described. The equipment is composed of easily available commercial devices and a data acquisition and regularization computer program is presented. The system, especially developed to investigate the ionic adsorption, equilibrium attainment and dissolution of hard mineralized tissues, provides good reliable results by taking into account the volume changes of the reacting solution and the electrode behaviour under different experimental conditions, and by avoiding carbonation of the solution. A second computer program, using the regularized data and the experimental parameters, calculates the quantities of protons consumed and calcium released in the case of equilibrium attainment and dissolution of apatite-like compounds. Finally, typical examples of ion-exchange and dissolution kinetics under constant pH of enamel and synthetic hydroxyapatite are examined.
Zero Robotics at Kennedy Space Center Visitor Complex
2017-08-11
A trio of programmable off-the-shelf Sphero robots are shown at the Center for Space Education at NASA's Kennedy Space Center in Florida. The Spheros were available for students to practice their programming skills during "loss of signal" times when the connection to the International Space Station was temporarily unavailable. Teams from across the state of Florida were gathered at Kennedy for the finals of the Zero Robotics Middle School Summer Program national championship. The five-week program allows rising sixth- through ninth-graders to write programs for small satellites called SPHERES (Synchronized, Position, Hold, Engage, Reorient, Experimental Satellites). Finalists saw their code tested aboard the orbiting laboratory.
The impact of football training on motor development in male children.
Erceg, Marko; Zagorac, Nebojsa; Katić, Ratko
2008-03-01
The aim of the study was to determine the effect of football school program and physical education curriculum on changes in the motor abilities of 7- and 8-year-old boys. The study included a sample of 180 boys divided into group 1 (7-year-old boys), subdivided to experimental (n = 40) and control (n = 50) groups, and group 2 (8-year-old boys), subdivided to experimental (n = 40) and control (n = 50) groups. Experimental groups included children attending three training units of football training over a 9-month period, in addition to the conventional physical education curriculum. Control groups included children attending only conventional physical education curriculum. All study subjects underwent testing with a battery of 12 motor tests at the beginning and at the end of the study. Results obtained by discriminative canonic analysis showed no statistically significant between-group difference in motor abilities at the beginning of the study. However, significant differences in favor of experimental groups were recorded at the end of the study. Favorable changes in all motor variables were observed in both experimental and control groups of children from the initial through the final state. These changes were more pronounced in experimental groups. Analysis of variance for difference variables (final to initial measurement) indicated programmed education in the form of football training in addition to regular physical education curriculum to predominantly influence the development of aerobic endurance, agility, speed and flexibility in 7-year-old boys, and of explosive strength, aerobic endurance, flexibility and speed in 8-year-old boys. In the latter, football training led to the formation of a motor complex integrating explosiveness, speed, coordination, endurance and flexibility as a general motor factor determining future quality development in football.
2014-08-15
CAPE CANAVERAL, Fla. – The Kennedy Space Center Visitor Complex Spaceperson poses for a photo with Carver Middle School students and their teacher from Orlando, Florida, during the Zero Robotics finals competition at NASA Kennedy Space Center's Space Station Processing Facility in Florida. The team, members of the After School All-Stars, were regional winners and advanced to the final competition. For the competition, students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
Gaming via Computer Simulation Techniques for Junior College Economics Education. Final Report.
ERIC Educational Resources Information Center
Thompson, Fred A.
A study designed to answer the need for more attractive and effective economics education involved the teaching of one junior college economics class by the conventional (lecture) method and an experimental class by computer simulation techniques. Econometric models approximating the "real world" were computer programed to enable the experimental…
ERIC Educational Resources Information Center
Merrill, E.L.; Russell, Wendell H.
Over a 31-month period from June 1966 to December 1968, the University of Tennessee and Union Carbide Corporation conducted preservice and inservice institutes for 160 industrial education teachers. These institutes carried college credit and covered Mechanical Technology and Drafting, Industrial Electronics Technology, Machine Shop and…
Enhancement of Productive Thinking in Institutionalized Mental Retardates. Final Report.
ERIC Educational Resources Information Center
Ladner, Judith L.
The purpose of the study was to evaluate the effectiveness of a supplementary program of 30 lessons to increase the productive thinking abilities (divergent thinking) of educable mentally handicapped students. An experimental group of 30 institutionalized children were given the supplementary lessons at a rate of three per week. The lessons, based…
Manpower Training Coordinators Project. Final Report. Experimental Project in Vocational Education.
ERIC Educational Resources Information Center
Smith, E. Jimmy
On June 1, 1980, the South Carolina Department of Education, Office of Vocational Education, entered into a contractual agreement with the Governor's Office, CETA Division, for the purpose of operating a Manpower Training Coordinators Program in 10 school districts serving rural areas. The project was designed to establish and maintain effective…
ERIC Educational Resources Information Center
Datnow, Amanda; Hubbard, Lea; Woody, Elisabeth
In 1997, California became the first state to conduct large-scale experimentation with single gender public education. This longitudinal study examined the impact of single gender academies in six California districts, focusing on equity implications. Data from observations and interviews with educators, policymakers, and students indicated that…
Texas Labor Mobility, Experimental and Demonstration Project. Final Report.
ERIC Educational Resources Information Center
Texas Employment Commission, Austin.
The Texas Labor Mobility Project's purpose was to demonstrate the effectiveness of using financial assistance to create stability in migrant workers and to reduce unemployment. The program was designed as a research project to gather information about all phases of the Mobility Project. This was handled through the Texas Employment Commission. In…
NASIC at MIT. Final Report, 1 March 1974 through 28 February 1975.
ERIC Educational Resources Information Center
Benenfeld, Alan R.; And Others
Computer-based reference search services were provided to users on a fee-for-service basis at the Massachusetts Institute of Technology as the first, and experimental, note in the development of the Northeast Academic Science Information Center (NASIC). Development of a training program for information specialists and training materials is…
Follow Through Classroom Process Measurement and Pupil Growth (1970-71). Final Report.
ERIC Educational Resources Information Center
Soar, Robert S.
This study presents results from the last year of a three-year adjunctive evaluation of classroom process measurement and pupil growth. A total of 289 classrooms involving eight experimental programs, ranging from open classrooms to contingency management classes, along with a comparison sample, were observed. Four observation instruments were…
[The use of systematic review to develop a self-management program for CKD].
Lee, Yu-Chin; Wu, Shu-Fang Vivienne; Lee, Mei-Chen; Chen, Fu-An; Yao, Yen-Hong; Wang, Chin-Ling
2014-12-01
Chronic kidney disease (CKD) has become a public health issue of international concern due to its high prevalence. The concept of self-management has been comprehensively applied in education programs that address chronic diseases. In recent years, many studies have used self-management programs in CKD interventions and have investigated the pre- and post-intervention physiological and psychological effectiveness of this approach. However, a complete clinical application program in the self-management model has yet to be developed for use in clinical renal care settings. A systematic review is used to develop a self-management program for CKD. Three implementation steps were used in this study. These steps include: (1) A systematic literature search and review using databases including CEPS (Chinese Electronic Periodical Services) of Airiti, National Digital Library of Theses and Dissertations in Taiwan, CINAHL, Pubmed, Medline, Cochrane Library, and Joanna Briggs Institute. A total of 22 studies were identified as valid and submitted to rigorous analysis. Of these, 4 were systematic literature reviews, 10 were randomized experimental studies, and 8 were non-randomized experimental studies. (2) Empirical evidence then was used to draft relevant guidelines on clinical application. (3) Finally, expert panels tested the validity of the draft to ensure the final version was valid for application in practice. This study designed a self-management program for CKD based on the findings of empirical studies. The content of this program included: design principles, categories, elements, and the intervention measures used in the self-management program. This program and then was assessed using the content validity index (CVI) and a four-point Liker's scale. The content validity score was .98. The guideline of self-management program to CKD was thus developed. This study developed a self-management program applicable to local care of CKD. It is hoped that the guidelines developed in this study offer a reference for clinical caregivers to improve their healthcare practices.
Beam dynamics issues in linear colliders
DOE Office of Scientific and Technical Information (OSTI.GOV)
Seeman, J.T.
1989-06-01
The primary goal of present and future linear colliders is to maximize the integrated luminosity for the experimental program. Beam dynamics plays a central role in the maximization of integrated luminosity. It is the major issue in the production of small beam sizes and low experimental backgrounds and is also an important factor in the production of particle numbers, in the acceleration process, and in the number of bunches. The beam dynamics effects on bunches which are extracted from the damping rings, accelerated in the linac, collimated, momentum analyzed, and finally delivered to the final focus are reviewed. The effectsmore » of bunch compression, transverse and longitudinal wakefields, BNS damping, energy definition, dispersion, emittance, bunch aspect ratio, feedback, and stability are all important. 11 refs., 1 tab.« less
NASA Technical Reports Server (NTRS)
Jackson, J. E.
1978-01-01
Scientific results from OGO-5 and OGO-6 experiments are summarized and approximately 200 citations are included to update the 1975 OGO bibliography. Personal author, subject, and corporate source indexes are included. The supplement follows the same format as that of the OGO Program Summary; it does not repeat the finalized information in the original publication, which should be consulted for indexes of experiments, experimenters, institutions, and the glossary of abbreviations and acronyms.
Ray-trace analysis of glancing-incidence X-ray optical systems
NASA Technical Reports Server (NTRS)
Foreman, J. W., Jr.; Cardone, J. M.
1976-01-01
The results of a ray-trace analysis of several glancing-incidence X-ray optical systems are presented. The object of the study was threefold. First, the vignetting characteristics of the S-056 X-ray telescope were calculated using experimental data to determine mirror reflectivities. Second, a small Wolter Type I X-ray telescope intended for possible use in the Geostationary Operational Environmental Satellite program was designed and ray traced. Finally, a ray-trace program was developed for a Wolter-Schwarzschild X-ray telescope.
International Piping Integrity Research Group (IPIRG) Program. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wilkowski, G.; Schmidt, R.; Scott, P.
1997-06-01
This is the final report of the International Piping Integrity Research Group (IPIRG) Program. The IPIRG Program was an international group program managed by the U.S. Nuclear Regulatory Commission and funded by a consortium of organizations from nine nations: Canada, France, Italy, Japan, Sweden, Switzerland, Taiwan, the United Kingdom, and the United States. The program objective was to develop data needed to verify engineering methods for assessing the integrity of circumferentially-cracked nuclear power plant piping. The primary focus was an experimental task that investigated the behavior of circumferentially flawed piping systems subjected to high-rate loadings typical of seismic events. Tomore » accomplish these objectives a pipe system fabricated as an expansion loop with over 30 meters of 16-inch diameter pipe and five long radius elbows was constructed. Five dynamic, cyclic, flawed piping experiments were conducted using this facility. This report: (1) provides background information on leak-before-break and flaw evaluation procedures for piping, (2) summarizes technical results of the program, (3) gives a relatively detailed assessment of the results from the pipe fracture experiments and complementary analyses, and (4) summarizes advances in the state-of-the-art of pipe fracture technology resulting from the IPIRG program.« less
Zero Robotics at Kennedy Space Center Visitor Complex
2017-08-11
NASA Kennedy Space Center's Trent Smith conducts a quantum levitation demonstration, using liquid nitrogen, metal and a magnetic track, for students and their sponsors in the Center for Space Education at NASA’s Kennedy Space Center in Florida. Teams from across the state of Florida were gathered at Kennedy for the finals of the Zero Robotics Middle School Summer Program national championship. The five-week program allows rising sixth- through ninth-graders to write programs for small satellites called SPHERES (Synchronized, Position, Hold, Engage, Reorient, Experimental Satellites). Finalists saw their code tested aboard the International Space Station.
The impact of dance-aerobics training on the morpho-motor status in female high-schoolers.
Viskić-Stalec, Natasa; Stalec, Janez; Katić, Ratko; Podvorac, Durda; Katović, Darko
2007-03-01
The aim of the study was to analyze the impact of special programmed physical education including dance, aerobics and rhythmic gymnastics on the development of motor and functional abilities and morphological characteristics of female fourth-grade high-schoolers in Zagreb. A total sample of 220 high-schoolers aged 16-18 years were divided into two groups: experimental group of 115 students attending the program composed of dance structures and aerobics, and control group of 105 students attending classic program of physical education. A set of 3 morphological variables, 6 motor variables and one functional variable were applied in both groups on three occasions during an academic year (initial, transient and final measurements). Two-factor analysis of variance (MANOVA repeated measure design) showed the experimental program to significantly influence the development of coordination/agility and specific rhythm coordination, functional aerobic ability, repetitive and explosive strength and flexibility, along with significant reduction of overweight and adipose tissue. Study results clearly indicate that the existing programs of physical education should be revised and replaced by more appropriate ones.
Cook, Judith A; Leff, H Stephen; Blyler, Crystal R; Gold, Paul B; Goldberg, Richard W; Mueser, Kim T; Toprac, Marcia G; McFarlane, William R; Shafer, Michael S; Blankertz, Laura E; Dudek, Ken; Razzano, Lisa A; Grey, Dennis D; Burke-Miller, Jane
2005-05-01
National probability surveys indicate that most individuals with schizophrenia and other severe mental illnesses are not employed. This multisite study tested the effectiveness of supported employment (SE) models combining clinical and vocational rehabilitation services to establish competitive employment. We randomly assigned 1273 outpatients with severe mental illness from 7 states in the United States to an experimental SE program or to a comparison or a services-as-usual condition, with follow-up for 24 months. Participants were interviewed semiannually, paid employment was tracked weekly, and vocational and clinical services were measured monthly. Mixed-effects random regression analysis was used to predict the likelihood of competitive employment, working 40 or more hours in a given month, and monthly earnings. Cumulative results during 24 months show that experimental group participants (359/648 [55%]) were more likely than those in the comparison programs (210/625 [34%]) to achieve competitive employment (chi(2) = 61.17; P<.001). Similarly, patients in experimental group programs (330/648 [51%]) were more likely than those in comparison programs (245/625 [39%]) to work 40 or more hours in a given month (chi(2) = 17.66; P<.001). Finally, participants in experimental group programs had significantly higher monthly earnings than those in the comparison programs (mean, US 122 dollars/mo [n=639] vs US 99 dollars/mo [n=622]); t(1259) = -2.04; P<.05). In the multivariate longitudinal analysis, experimental condition subjects were more likely than comparison group subjects to be competitively employed, work 40 or more hours in a given month, and have higher earnings, despite controlling for demographic, clinical, work history, disability beneficiary status, and study site confounders. Moreover, the advantage of experimental over comparison group participants increased during the 24-month study period. The SE models tailored by integrating clinical and vocational services were more effective than services as usual or unenhanced services.
Collaborative Testing in Practical Laboratories: An Effective Teaching-Learning Method in Histology.
Guo, Yuping; Li, Enzhong
2016-01-01
This article presents an experimental teaching and learning program used in histology with first-year students in the second term in the Faculty of Biology at Huanghuai University, China. Eighty-six students were divided randomly into two groups (n=43 per group). Tests were conducted at the end of each practical laboratory (10 laboratories in total) in which collaborative testing was used in the experimental group and traditional testing in the control group. To assess achievement, a final examination in histology was carried out at the end of the course. To determine students' attitude to the teaching styles, a questionnaire survey was conducted at the end of the term. Results showed that students preferred the collaborative testing format. In the experimental group, students' scores were significantly higher than those of students in the control group in final examinations. These findings indicate that collaborative testing enhances student learning and understanding of the material taught, and suggest that collaborative testing is an effective teaching-learning method in histology.
Design of a motor-generator for an energy storage flywheel
NASA Astrophysics Data System (ADS)
Niemeyer, W. Leland; Studer, Philip A.
1988-10-01
The paper examines motor/generator designs in which the rotor is integrated into the flywheel. Rotational loss considerations tend to dominate the design tradeoffs to maintain high system storage efficiency with a directly coupled unit. Some of the design alternatives are described as a guide to the experimental and analytical program needed to finalize a design.
Computational Performance of Group IV Personnel in Vocational Training Programs. Final Report.
ERIC Educational Resources Information Center
Main, Ray E.; Harrigan, Robert J.
The document evaluates Navy Group Four personnel gains in basic arithmetic skills after taking experimental courses in linear measurement and recipe conversion. Categorized as Mental Group Four by receiving scores from the 10th to the 30th percentile of the Armed Forces Qualification Test, trainees received instruction tailored to the level of…
Upgrading the Household Worker. Final Report (January 1967-September 1968).
ERIC Educational Resources Information Center
Willmart Services, Inc., Washington, DC.
A total of 108 women from low-income families who were underemployed and unemployed and who needed to develop marketable skills were selected for a 9-week training course offered by an agency which was established to upgrade the economic and social status of the household worker. The experimental program combined attitudinal training with training…
High-performance space shuttle auxiliary propellant valve system
NASA Technical Reports Server (NTRS)
Smith, G. M.
1973-01-01
Several potential valve closures for the space shuttle auxiliary propulsion system (SS/APS) were investigated analytically and experimentally in a modeling program. The most promising of these were analyzed and experimentally evaluated in a full-size functional valve test fixture of novel design. The engineering investigations conducted for both model and scale evaluations of the SS/APS valve closures and functional valve fixture are described. Preliminary designs, laboratory tests, and overall valve test fixture designs are presented, and a final recommended flightweight SS/APS valve design is presented.
Noise characteristics of upper surface blown configurations: Analytical Studies
NASA Technical Reports Server (NTRS)
Reddy, N. N.; Tibbetts, J. G.; Pennock, A. P.; Tam, C. K. W.
1978-01-01
Noise and flow results of upper surface blown configurations were analyzed. The dominant noise source mechanisms were identified from experimental data. From far-field noise data for various geometric and operational parameters, an empirical noise prediction program was developed and evaluated by comparing predicted results with experimental data from other tests. USB aircraft compatibility studies were conducted using the described noise prediction and a cruise performance data base. A final design aircraft was selected and theory was developed for the noise from the trailing edge wake assuming it as a highly sheared layer.
NASA Technical Reports Server (NTRS)
Domack, M. S.
1985-01-01
A research program was conducted to critically assess the effects of precracked specimen configuration, stress intensity solutions, compliance relationships and other experimental test variables for stress corrosion testing of 7075-T6 aluminum alloy plate. Modified compact and double beam wedge-loaded specimens were tested and analyzed to determine the threshold stress intensity factor and stress corrosion crack growth rate. Stress intensity solutions and experimentally determined compliance relationships were developed and compared with other solutions available in the literature. Crack growth data suggests that more effective crack length measurement techniques are necessary to better characterize stress corrosion crack growth. Final load determined by specimen reloading and by compliance did not correlate well, and was considered a major source of interlaboratory variability. Test duration must be determined systematically, accounting for crack length measurement resolution, time for crack arrest, and experimental interferences. This work was conducted as part of a round robin program sponsored by ASTM committees G1.06 and E24.04 to develop a standard test method for stress corrosion testing using precracked specimens.
NASA Astrophysics Data System (ADS)
Bogdanchikov, A.; Zhaparov, M.; Suliyev, R.
2013-04-01
Today we have a lot of programming languages that can realize our needs, but the most important question is how to teach programming to beginner students. In this paper we suggest using Python for this purpose, because it is a programming language that has neatly organized syntax and powerful tools to solve any task. Moreover it is very close to simple math thinking. Python is chosen as a primary programming language for freshmen in most of leading universities. Writing code in python is easy. In this paper we give some examples of program codes written in Java, C++ and Python language, and we make a comparison between them. Firstly, this paper proposes advantages of Python language in relation to C++ and JAVA. Then it shows the results of a comparison of short program codes written in three different languages, followed by a discussion on how students understand programming. Finally experimental results of students' success in programming courses are shown.
Optical synthesizer for a large quadrant-array CCD camera: Center director's discretionary fund
NASA Technical Reports Server (NTRS)
Hagyard, Mona J.
1992-01-01
The objective of this program was to design and develop an optical device, an optical synthesizer, that focuses four contiguous quadrants of a solar image on four spatially separated CCD arrays that are part of a unique CCD camera system. This camera and the optical synthesizer will be part of the new NASA-Marshall Experimental Vector Magnetograph, and instrument developed to measure the Sun's magnetic field as accurately as present technology allows. The tasks undertaken in the program are outlined and the final detailed optical design is presented.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Biancardi, F.R.; Michels, H.H.; Sienel, T.H.
1996-10-01
The purpose of this program was to conduct experimental and analytical efforts to determine lubricant circulation characteristics of new HFC/POE pairs and HFC/mineral oil pairs in a representative central residential HVAC system and to compare their behavior with the traditional HCFC-22/mineral oil (refrigerant/lubricant) pair. A dynamic test facility was designed and built to conduct the experimental efforts. This facility provided a unique capability to visually and physically measure oil circulation rates, on-line, in operating systems. A unique on-line ultraviolet-based measurement device was used to obtain detailed data on the rate and level of lubricant oil circulated within the operating heatmore » pump system. The experimental and analytical data developed during the program are presented as a function of vapor velocity, refrigerant/lubricant viscosity, system features and equipment. Both visual observations and instrumentation were used to understand ``worst case`` oil circulation situations. This report is presented in two volumes. Volume 1 contains a complete description of the program scope, objective, test results summary, conclusions, description of test facility and recommendations for future effort. Volume 2 contains all of the program test data essentially as taken from the laboratory dynamic test facility during the sequence of runs.« less
1992-07-01
methodologies ; software performance analysis; software testing; and concurrent languages. Finally, efforts in algorithms, which are primarily designed to upgrade...These codes provide a powerful research tool for testing new concepts and designs prior to experimental implementation. DoE’s laser program has also...development, and specially designed production facilities. World leadership in bth non -fluorinated and fluorinated materials resides in the U.S. but Japan
ERIC Educational Resources Information Center
Sergeant, Harold A.
The population of the study consisted of 15 high school industrial arts students, 10 freshman and sophomore college students, and 10 adults. A polysensory, self-pacing instructional system was developed which included (1) pretests and post tests, (2) a general instruction book, (3) equipment to practice arc welding, (4) programed instruction…
ERIC Educational Resources Information Center
Morford, John A.; Swegan, Donald B.
This three-volume report describes a research project which had the following objectives: 1) to improve the orientation programs for cooperating teachers who work with student teachers; 2) to improve procedures for selection and utilization of cooperating teachers in schools which accept student teachers; and 3) to develop experimental, innovative…
ERIC Educational Resources Information Center
Miller, Melvin D.; Wilkins, Sandra
A third-party evaluation was designed to document the processes undertaken to implement a Memphis, Tennessee, experience-based career education (EBCE) program. It also intended to assess project effects on student outcomes. Evaluation included pre- and post-testing of a control group and experimental group of tenth grade students enrolled in the…
ERIC Educational Resources Information Center
Israel, Benjamin L.; Litwin, Zelda
This progress report covers a 6-month period in the second year of an experimental research project to test the utility of the Edison Responsive Environment Talking Typewriter as a major tool for teaching both initial and remedial reading to educationally disadvantaged youth. Conducted in six schools in Brooklyn, New York, the study included…
PV Systems Reliability Final Technical Report: Ground Fault Detection
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lavrova, Olga; Flicker, Jack David; Johnson, Jay
We have examined ground faults in PhotoVoltaic (PV) arrays and the efficacy of fuse, current detection (RCD), current sense monitoring/relays (CSM), isolation/insulation (Riso) monitoring, and Ground Fault Detection and Isolation (GFID) using simulations based on a Simulation Program with Integrated Circuit Emphasis SPICE ground fault circuit model, experimental ground faults installed on real arrays, and theoretical equations.
Me and My Environment. Unit IV: Transfer and Cycling of Materials in My Environment.
ERIC Educational Resources Information Center
Biological Sciences Curriculum Study, Boulder, CO.
Presented is the experimental edition of Unit IV: Transfer and Cycling of Materials in My Environment, which consists of 29 life science curriculum activities intended for the 13-to-15-year-old educable mentally retarded child. The curriculum guide is being used in the final field test prior to revision. Stressed throughout the program are…
Polarized 3He target and Final State Interactions in SiDIS
Del Dotto, Alessio; Kaptari, Leonid; Pace, Emanuele; ...
2017-01-03
Jefferson Lab is starting a wide experimental program aimed at studying the neutron’s structure, with a great emphasis on the extraction of the parton transverse-momentum distributions (TMDs). To this end, Semi-inclusive deep-inelastic scattering (SiDIS) experiments on polarized $^3$He will be carried out, providing, together with proton and deuteron data, a sound flavor decomposition of the TMDs. Here, given the expected high statistical accuracy, it is crucial to disentangle nuclear and partonic degrees of freedom to get an accurate theoretical description of both initial and final states. In this contribution, a preliminary study of the Final State Interaction (FSI) in themore » standard SiDIS, where a pion (or a Kaon) is detected in the final state is presented, in view of constructing a realistic description of the nuclear initial and final states.« less
Project EX: A Program of Empirical Research on Adolescent Tobacco Use Cessation
Sussman, Steve; McCuller, William J; Zheng, Hong; Pfingston, Yvonne M; Miyano, James; Dent, Clyde W
2004-01-01
This paper presents the Project EX research program. The historical background for Project EX is presented, including a brief summary of reasons youth fail to quit tobacco use, the disappointing status of previous cessation research, and the teen cessation trial that provided the template for the current project (Project TNT). Next, program development studies for Project EX are described. Through use of focus groups, a theme study (concept evaluation of written activity descriptions), a component study, and pilot studies, an eight-session program was developed. This program involves novel activities (e.g., "talk show enactments," games, and alternative medicine-type activities such as yoga and meditation) in combination with motivation enhancement and cognitive-behavioral strategies to motivate and instruct in cessation initiation and maintenance efforts. The outcomes of the first experimental trial of Project EX, a school-based clinic program, are described, followed by a posthoc analysis of its effects mediation. A second EX study, a multiple baseline single group pilot study design in Wuhan, China, is described next. Description of a second experimental trial follows, which tested EX with nicotine gum versus a natural herb. A third experimental trial that tests a classroom prevention/cessation version of EX is then introduced. Finally, the implications of this work are discussed. The intent-to-treat quit rate for Project EX is approximately 15% across studies, double that of a standard care comparison. Effects last up to a six-month post-program at regular and alternative high schools. Through a systematic protocol of empirical program development and field trials, an effective and replicable model teen tobacco use cessation program is established. Future cessation work might expand on this work.
Project EX: A Program of Empirical Research on Adolescent Tobacco Use Cessation
Sussman, Steve; McCuller, William J; Zheng, Hong; Pfingston, Yvonne M; Miyano, James; Dent, Clyde W
2004-01-01
This paper presents the Project EX research program. The historical background for Project EX is presented, including a brief summary of reasons youth fail to quit tobacco use, the disappointing status of previous cessation research, and the teen cessation trial that provided the template for the current project (Project TNT). Next, program development studies for Project EX are described. Through use of focus groups, a theme study (concept evaluation of written activity descriptions), a component study, and pilot studies, an eight-session program was developed. This program involves novel activities (e.g., "talk show enactments," games, and alternative medicine-type activities such as yoga and meditation) in combination with motivation enhancement and cognitive-behavioral strategies to motivate and instruct in cessation initiation and maintenance efforts. The outcomes of the first experimental trial of Project EX, a school-based clinic program, are described, followed by a posthoc analysis of its effects mediation. A second EX study, a multiple baseline single group pilot study design in Wuhan, China, is described next. Description of a second experimental trial follows, which tested EX with nicotine gum versus a natural herb. A third experimental trial that tests a classroom prevention/cessation version of EX is then introduced. Finally, the implications of this work are discussed. The intent-to-treat quit rate for Project EX is approximately 15% across studies, double that of a standard care comparison. Effects last up to a six-month post-program at regular and alternative high schools. Through a systematic protocol of empirical program development and field trials, an effective and replicable model teen tobacco use cessation program is established. Future cessation work might expand on this work. PMID:19570278
Fromm-Haidenberger, Sabine; Pohl, Gudrun; Widder, Joachim; Kren, Gerhard; Fitzal, Florian; Bartsch, Rupert; de Vries, Jakob; Zielinski, Christoph; Pötter, Richard
2010-03-01
The "International Summer School on Experimental and Clinical Oncology for Medical Students" is organised at the Medical University of Vienna to teach a multidisciplinary approach to oncology to medical students in the final phase of their studies. The program includes biology, diagnosis, clinical and psycho-oncology. Lectures are given by medical, radiation and surgical oncologists. Teaching includes case reports, poster presentations and role-play. As part of the organising committee, Austrian students organise a social program. Since 1999, six courses have been held (147 students from 19 countries). Students recorded high satisfaction with organisation, scientific content and topic range. Case presentations, poster presentations and role-play were very useful. Early criticism that the program was too intense (long lectures and little interaction) has been answered. The summer school has a high degree of acceptance and is a very useful tool to teach medical students about oncology and approaching a cancer patient.
Flexibility of nucleic acids: From DNA to RNA
NASA Astrophysics Data System (ADS)
Lei, Bao; Xi, Zhang; Lei, Jin; Zhi-Jie, Tan
2016-01-01
The structural flexibility of nucleic acids plays a key role in many fundamental life processes, such as gene replication and expression, DNA-protein recognition, and gene regulation. To obtain a thorough understanding of nucleic acid flexibility, extensive studies have been performed using various experimental methods and theoretical models. In this review, we will introduce the progress that has been made in understanding the flexibility of nucleic acids including DNAs and RNAs, and will emphasize the experimental findings and the effects of salt, temperature, and sequence. Finally, we will discuss the major unanswered questions in understanding the flexibility of nucleic acids. Project supported by the National Basic Research Program of China (Grant No. 2011CB933600), the National Natural Science Foundation of China (Grant Nos. 11175132, 11575128, and 11374234), and the Program for New Century Excellent Talents, China (Grant No. NCET 08-0408).
Maciel, Felipe Jucá; Jucá, José Fernando Thomé
2011-05-01
Landfill gas (LFG) emissions from municipal solid waste (MSW) landfills are an important environmental concern in Brazil due to the existence of several uncontrolled disposal sites. A program of laboratory and field tests was conducted to investigate gas generation in and emission from an Experimental Cell with a 36,659-ton capacity in Recife/PE - Brazil. This investigation involved waste characterisation, gas production and emission monitoring, and geotechnical and biological evaluations and was performed using three types of final cover layers. The results obtained in this study showed that waste decomposes 4-5 times faster in a tropical wet climate than predicted by traditional first-order models using default parameters. This fact must be included when considering the techniques and economics of projects developed in tropical climate countries. The design of the final cover layer and its geotechnical and biological behaviour proved to have an important role in minimising gas emissions to the atmosphere. Capillary and methanotrophic final cover layers presented lower CH(4) flux rates than the conventional layer. Copyright © 2011 Elsevier Ltd. All rights reserved.
ERIC Educational Resources Information Center
Meckstroth, Alicia; Burwick, Andrew; Ponza, Michael; Marsh, Shawn; Novak, Tim; Phillips, Shannon; Diaz-Tena, Nuria; Ng, Judy
2006-01-01
Helping low-income families in rural areas find gainful employment and achieve economic self-sufficiency is an ongoing policy concern. The Rural Welfare-to-Work Strategies demonstration is using rigorous experimental designs to build knowledge about how to help low-income families in rural areas strive toward sustained employment and…
ERIC Educational Resources Information Center
Kushman, Jim; Hanita, Makoto; Raphael, Jacqueline
2011-01-01
Students entering high school face many new academic challenges. One of the most important is their ability to read and understand more complex text in literature, mathematics, science, and social studies courses as they navigate through a rigorous high school curriculum. The Regional Educational Laboratory (REL) Northwest conducted a study to…
ERIC Educational Resources Information Center
Axelrod, Joseph
In this report of a project on curriculum planning, a new language is developed for analyzing and describing "the curricular-instructional subsystem." Some of the data come from the author's experiences in planning and directing the Experimental Freshman-Year Program (EFP) at San Francisco State College, but most were collected at the…
ERIC Educational Resources Information Center
Tuskegee Inst., AL.
A project to provide basic education, counseling and occupational training to 125 unemployed or underemployed heads of families or households from rural areas of Alabama, and to secure employment for them at the conclusion of the program was conducted at Tuskegee. The four technical areas in which training was offered were brickmasonry, carpentry,…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Woods, Brian; Gutowska, Izabela; Chiger, Howard
Computer simulations of nuclear reactor thermal-hydraulic phenomena are often used in the design and licensing of nuclear reactor systems. In order to assess the accuracy of these computer simulations, computer codes and methods are often validated against experimental data. This experimental data must be of sufficiently high quality in order to conduct a robust validation exercise. In addition, this experimental data is generally collected at experimental facilities that are of a smaller scale than the reactor systems that are being simulated due to cost considerations. Therefore, smaller scale test facilities must be designed and constructed in such a fashion tomore » ensure that the prototypical behavior of a particular nuclear reactor system is preserved. The work completed through this project has resulted in scaling analyses and conceptual design development for a test facility capable of collecting code validation data for the following high temperature gas reactor systems and events— 1. Passive natural circulation core cooling system, 2. pebble bed gas reactor concept, 3. General Atomics Energy Multiplier Module reactor, and 4. prismatic block design steam-water ingress event. In the event that code validation data for these systems or events is needed in the future, significant progress in the design of an appropriate integral-type test facility has already been completed as a result of this project. Where applicable, the next step would be to begin the detailed design development and material procurement. As part of this project applicable scaling analyses were completed and test facility design requirements developed. Conceptual designs were developed for the implementation of these design requirements at the Oregon State University (OSU) High Temperature Test Facility (HTTF). The original HTTF is based on a ¼-scale model of a high temperature gas reactor concept with the capability for both forced and natural circulation flow through a prismatic core with an electrical heat source. The peak core region temperature capability is 1400°C. As part of this project, an inventory of test facilities that could be used for these experimental programs was completed. Several of these facilities showed some promise, however, upon further investigation it became clear that only the OSU HTTF had the power and/or peak temperature limits that would allow for the experimental programs envisioned herein. Thus the conceptual design and feasibility study development focused on examining the feasibility of configuring the current HTTF to collect validation data for these experimental programs. In addition to the scaling analyses and conceptual design development, a test plan was developed for the envisioned modified test facility. This test plan included a discussion on an appropriate shakedown test program as well as the specific matrix tests. Finally, a feasibility study was completed to determine the cost and schedule considerations that would be important to any test program developed to investigate these designs and events.« less
NASA Technical Reports Server (NTRS)
1988-01-01
The fifth year of the Center for Advanced Materials was marked primarily by the significant scientific accomplishments of the research programs. The Electronics Materials program continued its work on the growth and characterization of gallium arsenide crystals, and the development of theories to understand the nature and distribution of defects in the crystals. The High Tc Superconductivity Program continued to make significant contributions to the field in theoretical and experimental work on both bulk materials and thin films and devices. The Ceramic Processing group developed a new technique for cladding YBCO superconductors for high current applications in work with the Electric Power Research Institute. The Polymers and Composites program published a number of important studies involving atomistic simulations of polymer surfaces with excellent correlations to experimental results. The new Enzymatic Synthesis of Materials project produced its first fluorinated polymers and successfully began engineering enzymes designed for materials synthesis. The structural Materials Program continued work on novel alloys, development of processing methods for advanced ceramics, and characterization of mechanical properties of these materials, including the newly documented characterization of cyclic fatigue crack propagation behavior in toughened ceramics. Finally, the Surface Science and Catalysis program made significant contributions to the understanding of microporous catalysts and the nature of surface structures and interface compounds.
Hyper-X: Flight Validation of Hypersonic Airbreathing Technology
NASA Technical Reports Server (NTRS)
Rausch, Vincent L.; McClinton, Charles R.; Crawford, J. Larry
1997-01-01
This paper provides an overview of NASA's focused hypersonic technology program, i.e. the Hyper-X program. This program is designed to move hypersonic, air breathing vehicle technology from the laboratory environment to the flight environment, the last stage preceding prototype development. This paper presents some history leading to the flight test program, research objectives, approach, schedule and status. Substantial experimental data base and concept validation have been completed. The program is concentrating on Mach 7 vehicle development, verification and validation in preparation for wind tunnel testing in 1998 and flight testing in 1999. It is also concentrating on finalization of the Mach 5 and 10 vehicle designs. Detailed evaluation of the Mach 7 vehicle at the flight conditions is nearing completion, and will provide a data base for validation of design methods once flight test data are available.
Programmed temperature gasification study. Final report, October 1, 1979-November 30, 1980
DOE Office of Scientific and Technical Information (OSTI.GOV)
Spoon, M.J.; Gardner, M.P.; Starkovich, J.A.
An experimental, modeling and conceptual engineering analysis study has been performed to assess the feasibility of TRW's Programmed Temperature Gasification (PTG) concept for carbonizing caking coals without severe agglomeration. The concept involves control of carbonizing heating rate to maintain metaplast concentration at a level equal to or slightly below that which causes agglomeration. The experimental studies required the contruction of a novel programmed temperature, elevated pressure, hot stage video microscope for observation of coal particle changes during heating. This system was used to develop a minimum-time heating schedule capable of carbonizing the coal at elevated pressures in the presence ofmore » hydrogen without severe agglomeration. Isothermal fixed heating rate data for a series of coals were subsequently used to calibrate and verify the mathematical model for the PTG process. These results showed good correlation between experimental data and mathematical predictions. Commercial application of the PTG concept to batch, moving bed and fluid bed processing schemes was then evaluated. Based on the calibrated model programmed temperature gasification of the coal without severe agglomeration could be carried out on a commercial batch reaction in 4 to 12 minutes. The next step in development of the PTG concept for commercial application would require testing on a bench scale (3-inch diameter) gasifier coupled with a full commercial assessment to determine size and cost of various gasification units.« less
Chen, Shu-Ching; Huang, Bing-Shen; Lin, Chien-Yu; Fan, Kang-Hsing; Chang, Joseph Tung-Chien; Wu, Shu-Chen; Lai, Yeur-Hur
2017-09-01
The purpose of this study was to evaluate the effects of a skin camouflage program on disfigurement, self-esteem, social interaction, and body image in female head and neck cancer (HNC) survivors. A prospective, repeated-measures, randomized controlled therapeutic intervention design was used. A total of 66 participants were randomly assigned to each group, with 32 in the experimental group and 34 in the control group. The experimental group received a 4-session skin camouflage program, and the control group received routine care. Patients were assessed at 3 time points: baseline assessment (T0) and then at 1, 2, and 3 months (T1, T2, and T3, respectively) after participating in the skin camouflage program. Patients in the experimental group had significantly less facial disfigurement, depression, fear of social interaction, and anxiety regarding social interaction compared with those in the control group. Participants in both groups had significantly lower levels of facial disfigurement, depression, fear of social interaction, anxiety of social interaction, and body image at the final posttest assessment than at the pretest assessment. There were no differences between the groups and within groups with respect to self-esteem. The 3-month skin camouflage program effectively improved facial disfigurement, fear of social interaction, anxiety of social interaction, and body image of female HNC survivors. A survival care plan should include a skin camouflage program to improve body image perception and decrease anxiety after treatment of HNC. Copyright © 2016 John Wiley & Sons, Ltd.
Selmanović, Aleksandar; Milanović, Dragan; Custonja, Zrinko
2013-06-01
The aim was to evaluate the transformational effects of an additional weekly PE session based on team sports (basketball and volleyball) on students' motor status. The research was conducted on a sample of 125 eleven-year-old boys divided into three groups (two experimental and one control) which were examined by 12 motor tests at the beginning and at the end of the 9-month period. The tests included evaluation of explosive power dynamic and static strength endurance, co-ordination, flexibility and hand frequency motion. Although all three treatments together, complemented by the natural growth and developmental factors, induced significant quantitative changes, the results showed the highest motor improvements in the basketball experimental group, followed by the volleyball experimental group. While explosive power mainly contributed toward significant difference between the control and experimental groups in the final measurement, univarate test results also showed distinctive improvements in dynamic strength, hand frequency motion and various factors of co-ordination within experimental groups. The general conclusion points to the fact that even one additional PE session per week of the given program is sufficient to produce significant changes in motor abilities of elementary school fifth graders. Therefore the authors' support the legal provisions of mandatory implementation of extra-curricular forms of physical activity in elementary schools.
Aerodynamics of advanced axial-flow turbomachinery
NASA Technical Reports Server (NTRS)
Serovy, G. K.; Kavanagh, P.; Kiishi, T. H.
1980-01-01
A multi-task research program on aerodynamic problems in advanced axial-flow turbomachine configurations was carried out at Iowa State University. The elements of this program were intended to contribute directly to the improvement of compressor, fan, and turbine design methods. Experimental efforts in intra-passage flow pattern measurements, unsteady blade row interaction, and control of secondary flow are included, along with computational work on inviscid-viscous interaction blade passage flow techniques. This final report summarizes the results of this program and indicates directions which might be taken in following up these results in future work. In a separate task a study was made of existing turbomachinery research programs and facilities in universities located in the United States. Some potentially significant research topics are discussed which might be successfully attacked in the university atmosphere.
Zero Robotics at Kennedy Space Center Visitor Complex
2017-08-11
A programmable off-the-shelf Sphero robot is shown on a Mars mat at the Center for Space Education at NASA's Kennedy Space Center in Florida. The Spheros were available for students to practice their programming skills by navigating the robots around a challenge course on the mat. Students used the mat and Sphero robots during "loss of signal" times when the connection to the International Space Station was temporarily unavailable. Teams from across the state of Florida were gathered at Kennedy for the finals of the Zero Robotics Middle School Summer Program national championship. The five-week program allows rising sixth- through ninth-graders to write programs for small satellites called SPHERES (Synchronized, Position, Hold, Engage, Reorient, Experimental Satellites). Finalists saw their code tested aboard the orbiting laboratory.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Jarillo-Herrero, Pablo
This is the final report of our research program on electronic transport experiments on Topological Insulator (TI) devices, funded by the DOE Office of Basic Energy Sciences. TI-based electronic devices are attractive as platforms for spintronic applications, and for detection of emergent properties such as Majorana excitations , electron-hole condensates , and the topological magneto-electric effect . Most theoretical proposals envision geometries consisting of a planar TI device integrated with materials of distinctly different physical phases (such as ferromagnets and superconductors). Experimental realization of physics tied to the surface states is a challenge due to the ubiquitous presence of bulkmore » carriers in most TI compounds as well as degradation during device fabrication.« less
Biomedical and Human Factors Requirements for a Manned Earth Orbiting Station
NASA Technical Reports Server (NTRS)
Helvey, W.; Martell, C.; Peters, J.; Rosenthal, G.; Benjamin, F.; Albright, G.
1964-01-01
The primary objective of this study is to determine which biomedical and human factors measurements must be made aboard a space station to assure adequate evaluation of the astronaut's health and performance during prolonged space flights. The study has employed, where possible, a medical and engineering systems analysis to define the pertinent life sciences and space station design parameters and their influence on a measurement program. The major areas requiring evaluation in meeting the study objectives include a definition of the space environment, man's response to the environment, selection of measurement and data management techniques, experimental program, space station design requirements, and a trade-off analysis with final recommendations. The space environment factors that are believed to have a significant effect on man were evaluated. This includes those factors characteristic of the space environment (e. g. weightlessness, radiation) as well as those created within the space station (e. g. toxic contaminants, capsule atmosphere). After establishing the general features of the environment, an appraisal was made of the anticipated response of the astronaut to each of these factors. For thoroughness, the major organ systems and functions of the body were delineated, and a determination was made of their anticipated response to each of the environmental categories. A judgment was then made on the medical significance or importance of each response, which enabled a determination of which physiological and psychological effects should be monitored. Concurrently, an extensive list of measurement techniques and methods of data management was evaluated for applicability to the space station program. The various space station configurations and design parameters were defined in terms of the biomedical and human factors requirements to provide the measurements program. Research design of experimental programs for various station configurations, mission durations, and crew sizes were prepared, and, finally, a trade-off analysis of the critical variables in the station planning was completed with recommendations to enhance the confidence in the measurement program.
RESEARCH AND DEVELOPMENT ON ADVANCED GRAPHITE MATERIALS. Final Report
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
1962-04-01
A review is given of activities over the period October 15, 1960 to October 15, 1961 on a three year program for the research and development of materials, experimental techniques, and equipment for development of premium quality, reproducible graphite-base materials suitable for missile and astronautic applications. Progress is reported on research and development in the study areas of raw materials, fabrication, and material characterization and evaluation. (auth)
NASA/USRA advanced design program
NASA Technical Reports Server (NTRS)
1992-01-01
This report analyzes and presents a preliminary design for an experimental hypersonic vehicle. This plane will have a cruise speed of Mach 12 for one minute at an altitude of 120,000 feet. The major design areas of aerodynamics, propulsion, and weights are discussed in depth. An elementary analysis of thermal protection, trajectory, and cost is also presented. Finally, a discussion of future plans and recommendations is given, and overall conclusions are drawn.
ERIC Educational Resources Information Center
Bertoldi, Arthur; Duphiney, Lorna
A differentiated staffing model involving the use of adult educational assistants to work with the kindergarten teacher and children within the classroom was utilized as the experimental concept for an Early Childhood project funded under Title I of the 1965 Elementary Secondary Education Act in the 1970-71 school year. The primary purpose of the…
DOE Office of Scientific and Technical Information (OSTI.GOV)
Joshi, Chan; Mori, W.
2013-10-21
This is the final report on the DOE grant number DE-FG02-92ER40727 titled, “Experimental, Theoretical and Computational Studies of Plasma-Based Concepts for Future High Energy Accelerators.” During this grant period the UCLA program on Advanced Plasma Based Accelerators, headed by Professor C. Joshi has made many key scientific advances and trained a generation of students, many of whom have stayed in this research field and even started research programs of their own. In this final report however, we will focus on the last three years of the grant and report on the scientific progress made in each of the four tasksmore » listed under this grant. Four tasks are focused on: Plasma Wakefield Accelerator Research at FACET, SLAC National Accelerator Laboratory, In House Research at UCLA’s Neptune and 20 TW Laser Laboratories, Laser-Wakefield Acceleration (LWFA) in Self Guided Regime: Experiments at the Callisto Laser at LLNL, and Theory and Simulations. Major scientific results have been obtained in each of the four tasks described in this report. These have led to publications in the prestigious scientific journals, graduation and continued training of high quality Ph.D. level students and have kept the U.S. at the forefront of plasma-based accelerators research field.« less
Park, SoMi; Hur, Hea Kung; Kim, Ki Kyong; Song, Hee Young
2017-08-01
This study was undertaken to develop and test a mastery learning program of nursing skills for undergraduate nursing students. In this methodological study, first, the preliminary draft of a mastery learning program to provide training for nursing skills was developed based on Bloom's framework for mastery learning. Second, to test the developed program, a single-blinded, nonequivalent control group nonsynchronized study was conducted on 50 senior nursing students in a University selected by convenient sampling. Thirteen students were assigned to a control group; 13, 12, and 13 of them were assigned to intravenous therapy, transfusion, and patient transfer groups, respectively. The achievement levels and performance scores of the selected nursing skills were measured before and after the completion of the program in all the groups. Lastly, the final program was confirmed based on the results of the program testing. Intravenous therapy, transfusion, and patient transfer were selected as essential nursing skills for the program based on the priorities rated by clinical instructors and staff nurses. The achievement levels of selected nursing skills were determined by Angoff scores. After participating in the program, the proportion of passers and performance scores of the nursing skills in the experimental groups were significantly higher than those in the control group. The final program was confirmed which included a diagnostic test, enrichment activities for the passers and three repetitions of corrective activities and formative assessments for non-passers. The results suggest that a mastery learning program for undergraduate students can lead to better improvement and performance of essential nursing skills. © 2017 Korean Society of Nursing Science
The RAI DBS experiment with Olympus
NASA Astrophysics Data System (ADS)
Castelli, Enzo
The Italian broadcasting network (RAI) has studied the development of a national DBS service in an effort to outline a proposal for a space segment configuration compatible with development of new services, including HDTV. Proposals so far considered feature the integration of RAI's channel on Olympus in a future operational system and after extensive experimental use. Contents of the experimental program are discussed, and need for a broadcasting standard which considers projected introduction of HDTV is noted. The debate between RAI and consumer electronic industries on the use of broadcasting standards is outlined. The position of RAI in the context of HDTV and DBS is defined and the issue of determining the most effective transmission standard during the experimental stage is raised. It is pointed out that, in the absence of new production facilities for HDTV, the maximum quality which MAC will yield will be that of PAL since programs must be produced in PAL and then converted into MAC. Two alternatives for strategy on the use of broadcasting standards for DBS are offered. Finally, technical experiments and a market survey are discussed.
Low-rank regularization for learning gene expression programs.
Ye, Guibo; Tang, Mengfan; Cai, Jian-Feng; Nie, Qing; Xie, Xiaohui
2013-01-01
Learning gene expression programs directly from a set of observations is challenging due to the complexity of gene regulation, high noise of experimental measurements, and insufficient number of experimental measurements. Imposing additional constraints with strong and biologically motivated regularizations is critical in developing reliable and effective algorithms for inferring gene expression programs. Here we propose a new form of regulation that constrains the number of independent connectivity patterns between regulators and targets, motivated by the modular design of gene regulatory programs and the belief that the total number of independent regulatory modules should be small. We formulate a multi-target linear regression framework to incorporate this type of regulation, in which the number of independent connectivity patterns is expressed as the rank of the connectivity matrix between regulators and targets. We then generalize the linear framework to nonlinear cases, and prove that the generalized low-rank regularization model is still convex. Efficient algorithms are derived to solve both the linear and nonlinear low-rank regularized problems. Finally, we test the algorithms on three gene expression datasets, and show that the low-rank regularization improves the accuracy of gene expression prediction in these three datasets.
NASA Technical Reports Server (NTRS)
Wang, T.; Simon, T. W.
1988-01-01
Development of a recent experimental program to investigate the effects of streamwise curvature on boundary layer transition required making a bendable, heated and instrumented test wall, a rather nonconventional surface. The present paper describes this surface, the design choices made in its development and how uncertainty analysis was used, beginning early in the test program, to make such design choices. Published uncertainty analysis techniques were found to be of great value; but, it became clear that another step, one herein called the pre-test analysis, would aid the program development. Finally, it is shown how the uncertainty analysis was used to determine whether the test surface was qualified for service.
Configuration Aerodynamics: Past - Present - Future
NASA Technical Reports Server (NTRS)
Wood, Richard M.; Agrawal, Shreekant; Bencze, Daniel P.; Kulfan, Robert M.; Wilson, Douglas L.
1999-01-01
The Configuration Aerodynamics (CA) element of the High Speed Research (HSR) program is managed by a joint NASA and Industry team, referred to as the Technology Integration Development (ITD) team. This team is responsible for the development of a broad range of technologies for improved aerodynamic performance and stability and control characteristics at subsonic to supersonic flight conditions. These objectives are pursued through the aggressive use of advanced experimental test techniques and state of the art computational methods. As the HSR program matures and transitions into the next phase the objectives of the Configuration Aerodynamics ITD are being refined to address the drag reduction needs and stability and control requirements of High Speed Civil Transport (HSCT) aircraft. In addition, the experimental and computational tools are being refined and improved to meet these challenges. The presentation will review the work performed within the Configuration Aerodynamics element in 1994 and 1995 and then discuss the plans for the 1996-1998 time period. The final portion of the presentation will review several observations of the HSR program and the design activity within Configuration Aerodynamics.
Lin, Chien-Lin; Lin, Chin-Kai; Yu, Jia-Jhen
2018-01-01
Introduction This study aims to explore the impact of Parent Participation Program on the development of developmental delay children. Methods Pretest-posttest equivalent-group experimental design study was used in this paper. A total of 30 pairs of developmental delay children aged 0–72 months and their parents participated into this study. They were divided into two groups, namely control group and experimental group, according to parents’ wishes. The objects of study in control group received 16 courses of direct rehabilitation therapy; those in experimental group received 8 courses of direct rehabilitation therapy and 8 courses of instruction and tracking of Parent Participation Program. The duration of the intervention was 8 weeks. All cases should be evaluated before and after the intervention, to analyze the difference before and after intervention and among groups. The statistical methods in this paper included descriptive analysis, Chi-square test, independent sample t-test, pair-sample t-test. Results and conclusion The intervention of Parent Participation Occupational Program has positive impact on the development of developmental delay children in various fields. Among all the intervention results, the progress of the experimental group is 1.895 times more than that of the control group. With parent involvement, Parent Participation Occupational Therapy can promote the cognitive ability, language ability, action ability (gross and fine movement), social competence and self-care ability of children with developmental delay. Finally, the researcher presents suggestions and directions for future research in accordance with the results. PMID:29503546
1988-01-01
nerve and blister agents evaluated in this appendix have been especially formulated to cause -major injuries or death to enemy forces in wartime...days. Hallucinations, particularly of visual type. Patients may exhibit selfdestructive acts l Seizures may occur, but true convulsions arc rare l Rare...lesions produced in experimental animals by GB and interprets the damage as caused by convulsions or seizure activity that kill neurons (nerve cells
ERIC Educational Resources Information Center
Dunn, Lloyd M.; And Others
The Cooperative Reading Project's purpose was to examine the relative effectiveness of three approaches to the teaching of beginning reading and the effectiveness of oral stimulation. This monograph reports the results of the last year of the project. The experimental reading treatments were: (1) the Initial Teaching Alphabet (ITA), (2) the Words…
2014-08-15
CAPE CANAVERAL, Fla. – Kennedy Space Center Director and former astronaut Bob Cabana, talks to Florida middle school students and their teachers during the Zero Robotics finals competition at the center's Space Station Processing Facility in Florida. Students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
2014-08-15
CAPE CANAVERAL, Fla. – Kennedy Space Center Director and former astronaut Bob Cabana, talks to Florida middle school students and their teachers during the Zero Robotics finals competition at the center's Space Station Processing Facility in Florida. Students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
2014-08-15
CAPE CANAVERAL, Fla. – Kennedy Space Center Director and former astronaut Bob Cabana, talks to Florida middle school students and their teachers during the Zero Robotics finals competition at the center's Space Station Processing Facility in Florida. Students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
Thermal Destruction Of CB Contaminants Bound On Building ...
Symposium Paper An experimental and theoretical program has been initiated by the U.S. EPA to investigate issues of chemical/biological agent destruction in incineration systems when the agent in question is bound on common porous building interior materials. This program includes 3-dimensional computational fluid dynamics modeling with matrix-bound agent destruction kinetics, bench-scale experiments to determine agent destruction kinetics while bound on various matrices, and pilot-scale experiments to scale-up the bench-scale experiments to a more practical scale. Finally, model predictions are made to predict agent destruction and combustion conditions in two full-scale incineration systems that are typical of modern combustor design.
Development of a nondestructive vibration technique for bond assessment of Space Shuttle tiles
NASA Technical Reports Server (NTRS)
Moslehy, Faissal A.
1994-01-01
This final report describes the achievements of the above titled project. The project is funded by NASA-KSC (Grant No. NAG 10-0117) for the period of 1 Jan. to 31 Dec. 1993. The purpose of this project was to develop a nondestructive, noncontact technique based on 'vibration signature' of tile systems to quantify the bond conditions of the thermal protection system) tiles of Space Shuttle orbiters. The technique uses a laser rapid scan system, modal measurements, and finite element modeling. Finite element models were developed for tiles bonded to both clamped and deformable integrated skin-stringer orbiter mid-fuselage. Results showed that the size and location of a disbonded tile can be determined from frequency and mode shape information. Moreover, a frequency response survey was used to quickly identify the disbonded tiles. The finite element results were compared with experimentally determined frequency responses of a 17-tile test panel, where a rapidscan laser system was employed. An excellent degree of correlation between the mathematical simulation and experimental results was realized. An inverse solution for single-tile assemblies was also derived and is being implemented into a computer program that can interact with the modal testing software. The output of the program displays the size and location of disbond. This program has been tested with simulated input (i.e., finite element data), and excellent agreement between predicted and simulated disbonds was shown. Finally, laser vibration imaging and acoustic emission techniques were shown to be well suited for detecting and monitoring the progressive damage in Graphite/Epoxy composite materials.
Thermalization, Freeze-out, and Noise: Deciphering Experimental Quantum Annealers
NASA Astrophysics Data System (ADS)
Marshall, Jeffrey; Rieffel, Eleanor G.; Hen, Itay
2017-12-01
By contrasting the performance of two quantum annealers operating at different temperatures, we address recent questions related to the role of temperature in these devices and their function as "Boltzmann samplers." Using a method to reliably calculate the degeneracies of the energy levels of large-scale spin-glass instances, we are able to estimate the instance-dependent effective temperature from the output of annealing runs. Our results corroborate the "freeze-out" picture which posits two regimes, one in which the final state corresponds to a Boltzmann distribution of the final Hamiltonian with a well-defined "effective temperature" determined at a freeze-out point late in the annealing schedule, and another regime in which such a distribution is not necessarily expected. We find that the output distributions of the annealers do not, in general, correspond to a classical Boltzmann distribution for the final Hamiltonian. We also find that the effective temperatures at different programing cycles fluctuate greatly, with the effect worsening with problem size. We discuss the implications of our results for the design of future quantum annealers to act as more-effective Boltzmann samplers and for the programing of such annealers.
The Advanced Communications Technology Satellite - Performance, Reliability and Lessons Learned
NASA Technical Reports Server (NTRS)
Krawczyk, Richard J.; Ignaczak, Louis R.
2000-01-01
The Advanced Communications Satellite (ACTS) was conceived and developed in the mid- 1980s as an experimental satellite to demonstrate unproven Ka-band technology, and potential new commercial applications and services. Since launch into geostationary orbit in September 1993. ACTS has accumulated almost seven years of essentially trouble-free operation and met all program objectives. The unique technology, service experiments. and system level demonstrations accomplished by ACTS have been reported in many forums over the past several years. As ACTS completes its final experiments activity, this paper will relate the top-level program goals that have been achieved in the design, operation, and performance of the particular satellite subsystems. Pre-launch decisions to ensure satellite reliability and the subsequent operational experiences contribute to lessons learned that may be applicable to other comsat programs.
Highlights of Transient Plume Impingement Model Validation and Applications
NASA Technical Reports Server (NTRS)
Woronowicz, Michael
2011-01-01
This paper describes highlights of an ongoing validation effort conducted to assess the viability of applying a set of analytic point source transient free molecule equations to model behavior ranging from molecular effusion to rocket plumes. The validation effort includes encouraging comparisons to both steady and transient studies involving experimental data and direct simulation Monte Carlo results. Finally, this model is applied to describe features of two exotic transient scenarios involving NASA Goddard Space Flight Center satellite programs.
EMMA, a Recoil Mass Spectrometer for TRIUMF's ISAC-II Facility
NASA Astrophysics Data System (ADS)
Davids, Barry; EMMA Collaboration
2016-09-01
EMMA is a recoil mass spectrometer for TRIUMF's ISAC-II facility in the final stages of installation and commissioning. In this talk I will briefly review the spectrometer's design capabilities, describe recent progress in its installation and commissioning, and discuss plans for its initial experimental program. This work was supported by the Natural Sciences and Engineering Council of Canada. TRIUMF receives federal funds through a contribution agreement with the National Research Council of Canada.
Geostationary platform systems concepts definition study. Volume 2: Technical, book 3
NASA Technical Reports Server (NTRS)
1980-01-01
The supporting research and technology, and space demonstrations required to support the 1990s operational geostationary platforms are identified. Also the requirements on and interfaces with the Space Transportation System hardware elements supporting the geostationary platform program, including the shuttle, orbital transfer vehicles, teleoperator, etc., are investigated to provide integrated support requirements. Finally, a preliminary evaluation of the practicability and capabilities of an experimental platform from the standpoint of technology, schedule, and cost is given.
2014-08-15
CAPE CANAVERAL, Fla. – Former astronaut Greg Johnson, executive director of the Center for the Advancement of Science in Space, talks to Florida middle school students and their teachers before the start of the Zero Robotics finals competition at NASA Kennedy Space Center's Space Station Processing Facility in Florida. Students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
2014-08-15
CAPE CANAVERAL, Fla. – Former astronaut Greg Johnson, executive director of the Center for the Advancement of Science in Space, talks to Florida middle school students and their teachers before the start of the Zero Robotics finals competition at NASA Kennedy Space Center's Space Station Processing Facility in Florida. Students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
2014-08-15
CAPE CANAVERAL, Fla. – Former astronaut Greg Johnson, executive director of the Center for the Advancement of Science in Space, talks to Florida middle school students and their teachers before the start of the Zero Robotics finals competition at NASA Kennedy Space Center's Space Station Processing Facility in Florida. Students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
2014-08-15
CAPE CANAVERAL, Fla. – Florida middle school students and their teachers greet students from other locations via webex before the start of the Zero Robotics finals competition. The Florida teams are at the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. Students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
2014-08-15
CAPE CANAVERAL, Fla. – Florida middle school students and their teachers watch the Zero Robotics finals competition broadcast live via webex from the International Space Station. The Florida teams are at the Space Station Processing Facility at NASA's Kennedy Space Center in Florida. Students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
Technical basis for external dosimetry at the Waste Isolation Pilot Plant (WIPP)
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bradley, E.W.; Wu, C.F.; Goff, T.E.
1993-12-31
The WIPP External Dosimetry Program, administered by Westinghouse Electric Corporation, Waste Isolation Division, for the US Department of Energy (DOE), provides external dosimetry support services for operations at the Waste Isolation Pilot Plant (WIPP) Site. These operations include the receipt, experimentation with, storage, and disposal of transuranic (TRU) wastes. This document describes the technical basis for the WIPP External Radiation Dosimetry Program. The purposes of this document are to: (1) provide assurance that the WIPP External Radiation Dosimetry Program is in compliance with all regulatory requirements, (2) provide assurance that the WIPP External Radiation Dosimetry Program is derived from amore » sound technical base, (3) serve as a technical reference for radiation protection personnel, and (4) aid in identifying and planning for future needs. The external radiation exposure fields are those that are documented in the WIPP Final Safety Analysis Report.« less
Genome-wide alterations of the DNA replication program during tumor progression
NASA Astrophysics Data System (ADS)
Arneodo, A.; Goldar, A.; Argoul, F.; Hyrien, O.; Audit, B.
2016-08-01
Oncogenic stress is a major driving force in the early stages of cancer development. Recent experimental findings reveal that, in precancerous lesions and cancers, activated oncogenes may induce stalling and dissociation of DNA replication forks resulting in DNA damage. Replication timing is emerging as an important epigenetic feature that recapitulates several genomic, epigenetic and functional specificities of even closely related cell types. There is increasing evidence that chromosome rearrangements, the hallmark of many cancer genomes, are intimately associated with the DNA replication program and that epigenetic replication timing changes often precede chromosomic rearrangements. The recent development of a novel methodology to map replication fork polarity using deep sequencing of Okazaki fragments has provided new and complementary genome-wide replication profiling data. We review the results of a wavelet-based multi-scale analysis of genomic and epigenetic data including replication profiles along human chromosomes. These results provide new insight into the spatio-temporal replication program and its dynamics during differentiation. Here our goal is to bring to cancer research, the experimental protocols and computational methodologies for replication program profiling, and also the modeling of the spatio-temporal replication program. To illustrate our purpose, we report very preliminary results obtained for the chronic myelogeneous leukemia, the archetype model of cancer. Finally, we discuss promising perspectives on using genome-wide DNA replication profiling as a novel efficient tool for cancer diagnosis, prognosis and personalized treatment.
NASA Technical Reports Server (NTRS)
Spring, Samuel D.
2006-01-01
This report documents the results of an experimental program conducted on two advanced metallic alloy systems (Rene' 142 directionally solidified alloy (DS) and Rene' N6 single crystal alloy) and the characterization of two distinct internal state variable inelastic constitutive models. The long term objective of the study was to develop a computational life prediction methodology that can integrate the obtained material data. A specialized test matrix for characterizing advanced unified viscoplastic models was specified and conducted. This matrix included strain controlled tensile tests with intermittent relaxtion test with 2 hr hold times, constant stress creep tests, stepped creep tests, mixed creep and plasticity tests, cyclic temperature creep tests and tests in which temperature overloads were present to simulate actual operation conditions for validation of the models. The selected internal state variable models where shown to be capable of representing the material behavior exhibited by the experimental results; however the program ended prior to final validation of the models.
Evolutionary-based approaches for determining the deviatoric stress of calcareous sands
NASA Astrophysics Data System (ADS)
Shahnazari, Habib; Tutunchian, Mohammad A.; Rezvani, Reza; Valizadeh, Fatemeh
2013-01-01
Many hydrocarbon reservoirs are located near oceans which are covered by calcareous deposits. These sediments consist mainly of the remains of marine plants or animals, so calcareous soils can have a wide variety of engineering properties. Due to their local expansion and considerable differences from terrigenous soils, the evaluation of engineering behaviors of calcareous sediments has been a major concern for geotechnical engineers in recent years. Deviatoric stress is one of the most important parameters directly affecting important shearing characteristics of soils. In this study, a dataset of experimental triaxial tests was gathered from two sources. First, the data of previous experimental studies from the literature were gathered. Then, a series of triaxial tests was performed on calcareous sands of the Persian Gulf to develop the dataset. This work resulted in a large database of experimental results on the maximum deviatoric stress of different calcareous sands. To demonstrate the capabilities of evolutionary-based approaches in modeling the deviatoric stress of calcareous sands, two promising variants of genetic programming (GP), multigene genetic programming (MGP) and gene expression programming (GEP), were applied to propose new predictive models. The models' input parameters were the physical and in-situ condition properties of soil and the output was the maximum deviatoric stress (i.e., the axial-deviator stress). The results of statistical analyses indicated the robustness of these models, and a parametric study was also conducted for further verification of the models, in which the resulting trends were consistent with the results of the experimental study. Finally, the proposed models were further simplified by applying a practical geotechnical correlation.
Experimental and analytical research on the aerodynamics of wind driven turbines. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rohrbach, C.; Wainauski, H.; Worobel, R.
1977-12-01
This aerodynamic research program was aimed at providing a reliable, comprehensive data base on a series of wind turbine models covering a broad range of the prime aerodynamic and geometric variables. Such data obtained under controlled laboratory conditions on turbines designed by the same method, of the same size, and tested in the same wind tunnel had not been available in the literature. Moreover, this research program was further aimed at providing a basis for evaluating the adequacy of existing wind turbine aerodynamic design and performance methodology, for assessing the potential of recent advanced theories and for providing a basismore » for further method development and refinement.« less
Hou, Yi-You
2017-09-01
This article addresses an evolutionary programming (EP) algorithm technique-based and proportional-integral-derivative (PID) control methods are established to guarantee synchronization of the master and slave Rikitake chaotic systems. For PID synchronous control, the evolutionary programming (EP) algorithm is used to find the optimal PID controller parameters k p , k i , k d by integrated absolute error (IAE) method for the convergence conditions. In order to verify the system performance, the basic electronic components containing operational amplifiers (OPAs), resistors, and capacitors are used to implement the proposed chaotic Rikitake systems. Finally, the experimental results validate the proposed Rikitake chaotic synchronization approach. Copyright © 2017. Published by Elsevier Ltd.
LDRD Final Report 15-ERD-037 Matthews
DOE Office of Scientific and Technical Information (OSTI.GOV)
Matthews, Manyalibo J.
2017-10-26
The physics and materials science involved in laser materials processing of metals was studied experimentally using custom-built test beds and in situ diagnostics. Special attention was given to laser-based powder bed fusion additive manufacturing processes, a technology critically important to the stockpile stewardship program in NNSA. New light has been shed on several phenomena such as laser-driven spatter, material displacement and morphology changes. The results presented here and in publications generated by this work have proven impactful and useful to both internal and external communities. New directions in additive manufacturing research at LLNL have been enabled, along with new scientificmore » capabilities that can serve future program needs.« less
Utilization of the Building-Block Approach in Structural Mechanics Research
NASA Technical Reports Server (NTRS)
Rouse, Marshall; Jegley, Dawn C.; McGowan, David M.; Bush, Harold G.; Waters, W. Allen
2005-01-01
In the last 20 years NASA has worked in collaboration with industry to develop enabling technologies needed to make aircraft safer and more affordable, extend their lifetime, improve their reliability, better understand their behavior, and reduce their weight. To support these efforts, research programs starting with ideas and culminating in full-scale structural testing were conducted at the NASA Langley Research Center. Each program contained development efforts that (a) started with selecting the material system and manufacturing approach; (b) moved on to experimentation and analysis of small samples to characterize the system and quantify behavior in the presence of defects like damage and imperfections; (c) progressed on to examining larger structures to examine buckling behavior, combined loadings, and built-up structures; and (d) finally moved to complicated subcomponents and full-scale components. Each step along the way was supported by detailed analysis, including tool development, to prove that the behavior of these structures was well-understood and predictable. This approach for developing technology became known as the "building-block" approach. In the Advanced Composites Technology Program and the High Speed Research Program the building-block approach was used to develop a true understanding of the response of the structures involved through experimentation and analysis. The philosophy that if the structural response couldn't be accurately predicted, it wasn't really understood, was critical to the progression of these programs. To this end, analytical techniques including closed-form and finite elements were employed and experimentation used to verify assumptions at each step along the way. This paper presents a discussion of the utilization of the building-block approach described previously in structural mechanics research and development programs at NASA Langley Research Center. Specific examples that illustrate the use of this approach are included from recent research and development programs for both subsonic and supersonic transports.
Quantum-Enhanced Cyber Security: Experimental Computation on Quantum-Encrypted Data
2017-03-02
AFRL-AFOSR-UK-TR-2017-0020 Quantum-Enhanced Cyber Security: Experimental Computation on Quantum-Encrypted Data Philip Walther UNIVERSITT WIEN Final...REPORT TYPE Final 3. DATES COVERED (From - To) 15 Oct 2015 to 31 Dec 2016 4. TITLE AND SUBTITLE Quantum-Enhanced Cyber Security: Experimental Computation...FORM SF 298 Final Report for FA9550-1-6-1-0004 Quantum-enhanced cyber security: Experimental quantum computation with quantum-encrypted data
Laser program annual report, 1980
DOE Office of Scientific and Technical Information (OSTI.GOV)
Coleman, L.W.; Krupke, W.F.; Strack, J.R.
1981-06-01
Volume 2 contains five sections that cover the areas of target design, target fabrication, diagnostics, and fusion experiments. Section 3 reports on target design activities, plasma theory and simulation, code development, and atomic theory. Section 4 presents the accomplishments of the Target Fabrication Group, Section 5 contains the results of our diagnostics development, and Section 6 describes advances made in the management and analysis of experimental data. Finally, Section 7 in Volume 2 reports the results of laser target experiments conducted during the year.
ERIC Educational Resources Information Center
National Committee for Children and Youth, Washington, DC.
This report contains an analysis of the efforts in 1965 and 1966 of the National Committee for Children and Youth (NCCY) to help the youth in Baltimore and Washington, D.C. who failed to meet the educational requirements for military enlistment. A description of the program includes: (1) background of the NCCY, (2) intake and followup process, (3)…
2016-09-01
focus of early research was the effects of acoustics on droplet burning in turbine engines and combustion chambers.5,21–23 The results of this... Wire Anemometer. Time-resolved mass readings were made using a model MS4002S Mettler Toledo Precision Balance. 5. Acoustic Extinction This section...nanotube sound projectors. Nanotechnology. 2013;24(23):235501. 40. Hu L, Liu S, Xu Y, Li D. A wind tunnel experimental study on burning rate
A survey of experiments and experimental facilities for active control of flexible structures
NASA Technical Reports Server (NTRS)
Sparks, Dean W., Jr.; Horner, Garnett C.; Juang, Jer-Nan; Klose, Gerhard
1989-01-01
A brief survey of large space structure control related experiments and facilities was presented. This survey covered experiments performed before and up to 1982, and those of the present period (1982-...). Finally, the future planned experiments and facilities in support of the control-structure interaction (CSI) program were reported. It was stated that new, improved ground test facilities are needed to verify the new CSI design techniques that will allow future space structures to perform planned NASA missions.
NASA Technical Reports Server (NTRS)
Hall, Nancy R.; Stocker, Dennis P.; DeLombard, Richard
2011-01-01
This paper describes two student competition programs that allow student teams to conceive a science or engineering experiment for a microgravity environment. Selected teams design and build their experimental hardware, conduct baseline tests, and ship their experiment to NASA where it is operated in the 2.2 Second Drop Tower. The hardware and acquired data is provided to the teams after the tests are conducted so that the teams can prepare their final reports about their findings.
NASA Technical Reports Server (NTRS)
Pearson, Steven D.; Clifton, K. Stuart
1999-01-01
ABSTRACT The return of the Long Duration Exposure Facility (LDEF) in 1990 brought a wealth of space exposure data on materials, paints, solar cells, etc. and data on the many space environments. The effects of the harsh space environments can provide damaging or even disabling effects on spacecraft, its materials, and its instruments. In partnership with industry, academia, and other government agencies, National Aeronautics & Space Administration's (NASA's) Space Environments & Effects (SEE) Program defines the space environments and provides technology development to accommodate or mitigate these harmful environments on the spacecraft. This program provides a very comprehensive and focused approach to understanding the space environment, to define the best techniques for both flight and ground-based experimentation, to update the models which predict both the environments and the environmental effects on spacecraft, and finally to ensure that this information is properly maintained and inserted into spacecraft design programs. This paper will describe the current SEE Program and will present SEE contamination engineering technology development and risk mitigation for future spacecraft design.
NASA Astrophysics Data System (ADS)
Pearson, Steven D.; Clifton, K. Stuart
1999-10-01
The return of the Long Duration Exposure Facility (LDEF) in 1990 brought a wealth of space exposure data on materials, paints, solar cells, etc. and data on the many space environments. The effects of the harsh space environments can provide damaging or even disabling effects on spacecraft, its materials, and its instruments. In partnership with industry, academia, and other government agencies, National Aeronautics & Space Administration's (NASA's) Space Environments & Effects (SEE) Program defines the space environments and provides technology development to accommodate or mitigate these harmful environments on the spacecraft. This program provides a very comprehensive and focused approach to understanding the space environment, to define the best techniques for both flight and ground-based experimentation, to update the models which predict both the environments and the environmental effects on spacecraft, and finally to ensure that this information is properly maintained and inserted into spacecraft design programs. This paper will describe the current SEE Program and will present SEE contamination engineering technology development and risk mitigation for future spacecraft design.
The development and preliminary effectiveness of a nursing case management e-learning program.
Liu, Wen-I; Chu, Kuo-Chung; Chen, Shing-Chia
2014-07-01
The purpose of this article was to describe the development and preliminary effectiveness of a digital case management education program. The e-learning program was built through the collaboration of a nurse educator and an informatics professor. The program was then developed according to the following steps: (1) building a visual interface, (2) scripting each unit, (3) preparing the course material and assessment tests, (4) using teaching software to record audio and video courses, (5) editing the audio recordings, (6) using instructional media or hyperlinks to finalize the interactions, (7) creating the assessment and obtaining feedback, and (8) testing the overall operation. The digital program consisted of five learning modules, self-assessment questions, learning cases, sharing experiences, and learning resources. Forty nurses participated in this study and fully completed the questionnaires both before and after the program. The knowledge and confidence levels in the experimental group were significantly higher over time than those of the comparison group. The results supported the use of educational technology to provide a more flexible and effective presentation method for continuing education programs.
Experimental determination of dynamic parameters of an industrial robot
NASA Astrophysics Data System (ADS)
Banas, W.; Cwikła, G.; Foit, K.; Gwiazda, A.; Monica, Z.; Sekala, A.
2017-08-01
In an industry increasingly used are industrial robots. Commonly used are two basic methods of programming, on-line programming and off-line programming. In both cases, the programming consists in getting to the selected points record this position, and set the order of movement of the robot, and the introduction of logical tests. Such a program is easy to write, and it is suitable for most industrial applications. Especially when the process is known, respectively slow and unchanging. In this case, the program is being prepared for a universal model of the robot with the appropriate geometry and are checked only collisions. Is not taken into account the dynamics of the robot and how it will really behave while in motion. For this reason, the robot programmed to be tested at a reduced speed, which is raised gradually to the final value. Depending on the complexity of the move and the proximity of the elements it takes a lot of time. It is easy to notice that the robot at different speeds have different trajectories and behaves differently.
A brief introduction to PYTHIA 8.1
NASA Astrophysics Data System (ADS)
Sjöstrand, Torbjörn; Mrenna, Stephen; Skands, Peter
2008-06-01
The PYTHIA program is a standard tool for the generation of high-energy collisions, comprising a coherent set of physics models for the evolution from a few-body hard process to a complex multihadronic final state. It contains a library of hard processes and models for initial- and final-state parton showers, multiple parton-parton interactions, beam remnants, string fragmentation and particle decays. It also has a set of utilities and interfaces to external programs. While previous versions were written in Fortran, PYTHIA 8 represents a complete rewrite in C++. The current release is the first main one after this transition, and does not yet in every respect replace the old code. It does contain some new physics aspects, on the other hand, that should make it an attractive option especially for LHC physics studies. Program summaryProgram title:PYTHIA 8.1 Catalogue identifier: ACTU_v3_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ACTU_v3_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GPL version 2 No. of lines in distributed program, including test data, etc.: 176 981 No. of bytes in distributed program, including test data, etc.: 2 411 876 Distribution format: tar.gz Programming language: C++ Computer: Commodity PCs Operating system: Linux; should also work on other systems RAM: 8 megabytes Classification: 11.2 Does the new version supersede the previous version?: yes, partly Nature of problem: High-energy collisions between elementary particles normally give rise to complex final states, with large multiplicities of hadrons, leptons, photons and neutrinos. The relation between these final states and the underlying physics description is not a simple one, for two main reasons. Firstly, we do not even in principle have a complete understanding of the physics. Secondly, any analytical approach is made intractable by the large multiplicities. Solution method: Complete events are generated by Monte Carlo methods. The complexity is mastered by a subdivision of the full problem into a set of simpler separate tasks. All main aspects of the events are simulated, such as hard-process selection, initial- and final-state radiation, beam remnants, fragmentation, decays, and so on. Therefore events should be directly comparable with experimentally observable ones. The programs can be used to extract physics from comparisons with existing data, or to study physics at future experiments. Reasons for new version: Improved and expanded physics models, transition from Fortran to C++. Summary of revisions: New user interface, transverse-momentum-ordered showers, interleaving with multiple interactions, and much more. Restrictions: Depends on the problem studied. Running time: 10-1000 events per second, depending on process studied. References: [1] T. Sjöstrand, P. Edén, C. Friberg, L. Lönnblad, G. Miu, S. Mrenna, E. Norrbin, Comput. Phys. Comm. 135 (2001) 238.
78 FR 29117 - After Final Consideration Pilot Program 2.0
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-17
...] After Final Consideration Pilot Program 2.0 AGENCY: United States Patent and Trademark Office, Commerce... Final Consideration Pilot Program (AFCP) to create the After Final Consideration Pilot Program 2.0 (AFCP... without modifications) depending on feedback from the participants and the effectiveness of the pilot...
Experimental and theoretical IR and Raman spectra of picolinic, nicotinic and isonicotinic acids
NASA Astrophysics Data System (ADS)
Koczoń, P.; Dobrowolski, J. Cz.; Lewandowski, W.; Mazurek, A. P.
2003-07-01
The experimental and theoretical (B3PW91/6-311++G**) vibrational (IR and Raman) spectra of picolinic, nicotinic and isonicotinic acids (pyridine-2-, -3-, and -4-carboxylic acid, respectively) were studied. Three stable calculated structures were found for picolinic acid: the structure with intramolecular hydrogen COOH⋯N bond, and the two without hydrogen bond. For the nicotinic acid two stable theoretical structures differ in orientation of the COOH group with respect to the nitrogen atom, whereas for the isonicotinic acid only one form was stable. The theoretical vibrational spectra of the three acids were interpreted by means of potential energy distributions (PEDs) using VEDA 3 program. Next, selected experimental bands were assigned based on the scaled theoretical wavenumbers. Finally, the wavenumbers and intensities for the three isomeric acids were compared and discussed in terms of location of the carboxylic group.
NASA Technical Reports Server (NTRS)
Andrews, E. H., Jr.; Mackley, E. A.
1976-01-01
An aerodynamic engine inlet analysis was performed on the experimental results obtained at nominal Mach numbers of 5, 6, and 7 from the NASA Hypersonic Research Engine (HRE) Aerothermodynamic Integration Model (AIM). Incorporation on the AIM of the mixed-compression inlet design represented the final phase of an inlet development program of the HRE Project. The purpose of this analysis was to compare the AIM inlet experimental results with theoretical results. Experimental performance was based on measured surface pressures used in a one-dimensional force-momentum theorem. Results of the analysis indicate that surface static-pressure measurements agree reasonably well with theoretical predictions except in the regions where the theory predicts large pressure discontinuities. Experimental and theoretical results both based on the one-dimensional force-momentum theorem yielded inlet performance parameters as functions of Mach number that exhibited reasonable agreement. Previous predictions of inlet unstart that resulted from pressure disturbances created by fuel injection and combustion appeared to be pessimistic.
Performance of the NASA Airborne Radar with the Windshear Database for Forward-Looking Systems
NASA Technical Reports Server (NTRS)
Switzer, George F.; Britt, Charles L.
1996-01-01
This document describes the simulation approach used to test the performance of the NASA airborne windshear radar. An explanation of the actual radar hardware and processing algorithms provides an understanding of the parameters used in the simulation program. This report also contains a brief overview of the NASA airborne windshear radar experimental flight test results. A description of the radar simulation program shows the capabilities of the program and the techniques used for certification evaluation. Simulation of the NASA radar is comprised of three steps. First, the choice of the ground clutter data must be made. The ground clutter is the return from objects in or nearby an airport facility. The choice of the ground clutter also dictates the aircraft flight path since ground clutter is gathered while in flight. The second step is the choice of the radar parameters and the running of the simulation program which properly combines the ground clutter data with simulated windshear weather data. The simulated windshear weather data is comprised of a number of Terminal Area Simulation System (TASS) model results. The final step is the comparison of the radar simulation results to the known windshear data base. The final evaluation of the radar simulation is based on the ability to detect hazardous windshear with the aircraft at a safe distance while at the same time not displaying false alerts.
,
2008-01-01
Executive Summary Glen Canyon Dam is located in the lower reaches of Glen Canyon National Recreation Area on the Colorado River, approximately 15 miles upriver from Grand Canyon National Park (fig. 1). In 1992, Congress passed and the President signed into law the Grand Canyon Protection Act (GCPA; title XVIII, sec. 1801?1809, of Public Law 102-575), which seeks ?to protect, mitigate adverse impacts to, and improve the values for which Grand Canyon National Park and Glen Canyon National Recreation Area were established.? The Glen Canyon Dam Adaptive Management Program (GCDAMP) was implemented as a result of the 1996 Record of Decision on the Operation of Glen Canyon Dam Final Environmental Impact Statement to ensure that the primary mandate of the GCPA is met through advances in information and resources management (U.S. Department of the Interior, 1995). On November 3, 2006, the Bureau of Reclamation (Reclamation) announced it would develop a long-term experimental plan environmental impact statement (LTEP EIS) for operational activities at Glen Canyon Dam and other management actions on the Colorado River. The purpose of the long-term experimental plan is twofold: (1) to increase the scientific understanding of the ecosystem and (2) to improve and protect important downstream resources. The proposed plan would implement a structured, longterm program of experimentation to include dam operations, potential modifications to Glen Canyon Dam intake structures, and other management actions such as removal of nonnative fish species. The development of the long-term experimental plan continues efforts begun by the GCDAMP to protect resources downstream of Glen Canyon Dam, including Grand Canyon, through adaptive management and scientific experimentation. The LTEP EIS will rely on the extensive scientific studies that have been undertaken as part of the adaptive management program by the U.S. Geological Survey?s (USGS) Grand Canyon Monitoring and Research Center (GCMRC), one of the four research stations within the USGS Southwest Biological Science Center. On April 10 and 11, 2007, at the behest of Reclamation, the GCMRC convened a workshop with scientific experts to identify one or more scientifically credible, long-term experimental options for Reclamation to consider for the LTEP EIS that would be consistent with the purpose and need for the plan. Workshop participants included government, academic, and private scientists with broad experience in the Colorado River in Grand Canyon and regulated rivers around the world. Resource managers and GCDAMP participants were also present on the second day of the workshop. In advance of the workshop, Reclamation and LTEP EIS cooperating agencies identified 14 core scientific questions. Workshop participants were asked to consider how proposed options would address these questions, which fall primarily into four areas: (1) conservation of endangered humpback chub (Gila cypha) and other high-priority biological resources, (2) conservation of sediment resources, (3) enhancement of recreational resources, and (4) preservation of cultural resources. A secondary objective of the workshop was the evaluation of four long-term experimental options developed by the GCDAMP Science Planning Group (SPG) (appendix B). The flow and nonflow treatments called for in the four experimental options were an important starting point for workshop discussions. At the beginning of the workshop, participants were provided with the final LTEP EIS scoping report prepared by Reclamation. Participants were also advised that Reclamation had committed to ?make every effortEto ensure that a new population of humpback chub is established in the mainstem or one or more of the tributaries within Grand Canyon? in the 1995 Operation of Glen Canyon Dam Final Environmental Impact Statement (U.S. Department of the Interior, 1995). This decision was consistent with the U.S. Fish and Wildlife Service?s 1995 bi
Design requirements for plasma facing materials in ITER
NASA Astrophysics Data System (ADS)
Matera, R.; Federici, G.; ITER Joint Central Team
1996-10-01
After the official approval of the Interim Design Report, the ITER project enters the final phase of the EDA. With the definition of the design requirements of the high heat flux components, the structural and armor materials' working domain is better specified, allowing to focus the R & D program on the most critical issues and to orient the design of divertor and first wall components towards those concepts which potentially have a better chance to withstand normal and off-normal operating conditions. Among the latter, slow, high-power, high recycling transient are at present driving the design of high heat flux components. Examples of possible design solution under experimental validation in the R & D program are presented and discussed in this paper.
Kang, Yune Sik; Choi, So Young; Ryu, Eunjung
2009-07-01
This study examined the effectiveness of a stress coping program based on mindfulness meditation on the stress, anxiety, and depression experienced by nursing students in Korea. A nonequivalent, control group, pre-posttest design was used. A convenience sample of 41 nursing students were randomly assigned to experimental (n=21) and control groups (n=20). Stress was measured with the PWI-SF (5-point) developed by Chang. Anxiety was measured with Spieberger's state anxiety inventory. Depression was measured with the Beck depression inventory. The experimental group attended 90-min sessions for eight weeks. No intervention was administered to the control group. Nine participants were excluded from the analysis because they did not complete the study due to personal circumstances, resulting in 16 participants in each group for the final analysis. Results for the two groups showed (1) a significant difference in stress scores (F=6.145, p=0.020), (2) a significant difference in anxiety scores (F=6.985, p=0.013), and (3) no significant difference in depression scores (t=1.986, p=0.056). A stress coping program based on mindfulness meditation was an effective intervention for nursing students to decrease their stress and anxiety, and could be used to manage stress in student nurses. In the future, long-term studies should be pursued to standardize and detail the program, with particular emphasis on studies to confirm the effects of the program in patients with diseases, such as cancer.
Kutz, D F; Marzocchi, N; Fattori, P; Cavalcanti, S; Galletti, C
2005-06-01
A new method is presented based on trinary logic able to check the state of different control variables and synchronously record the physiological and behavioral data of behaving animals and humans. The basic information structure of the method is a time interval of defined maximum duration, called time slice, during which the supervisor system periodically checks the status of a specific subset of input channels. An experimental condition is a sequence of time slices subsequently executed according to the final status of the previous time slice. The proposed method implements in its data structure the possibility to branch like an if-else cascade and the possibility to repeat parts of it recursively like the while-loop. Therefore its data structure contains the most basic control structures of programming languages. The method was implemented using a real-time version of LabVIEW programming environment to program and control our experimental setup. Using this supervision system, we synchronously record four analog data channels at 500 Hz (including eye movements) and the time stamps of up to six neurons at 100 kHz. The system reacts with a resolution within 1 ms to changes of state of digital input channels. The system is set to react to changes in eye position with a resolution within 4 ms. The time slices, experimental conditions, and data are handled by relational databases. This facilitates the construction of new experimental conditions and data analysis. The proposed implementation allows continuous recording without an inter-trial gap for data storage or task management. The implementation can be used to drive electrophysiological experiments of behaving animals and psychophysical studies with human subjects.
NASA Technical Reports Server (NTRS)
Johnson, R. L.; Young, Donald L. (Technical Monitor)
1967-01-01
This report contains the results of a fifteen month analytical and experimental study of the leakage rate of the pressurant gases (N2, He) and the propellant vapors (N2O4,N2H4) through bladder structures consisting of two layers of Teflon separated by a metallic foil diffusion barrier containing microscopic or larger holes. Results were obtained for the steady state leakage rate through circular holes and long rectangular openings in the barrier for arbitrary thicknesses of the two Teflon layers. The effect of hole shape and relative hole position on the leakage rate were studied. The transient problem was analyzed and it was shown that steady state calculations are adequate for estimating the leakage rate. A computer program entitled "Diffusion Analyzer Program" was developed to calculate the leakage rate, both transient and steady state. Finally, the analytical results were compared to experimentally determined values of the leakage rate through a model laminated bladder structure. The results of the analysis are in good agreement with experiment. The experimental effort (Part II of the Bladder Permeation Program) measured the solubility, diffusion coefficient and permeability of helium, nitrogen and nitrogen tetroxide vapor through Teflon TFE and FEP membranes. Data were obtained in the temperature range of 25 to 100 C at pressures ranging from near vacuum to about 20 atmospheres. Results of the experimental effort were compared with the limited data previously reported. As a verification to the applicability of results to actual bladder systems, counter diffusion tests were performed with a laminated sample containing aluminum foil with a selected group of holes.
[Evaluation of preliminary grades and credits in nurse training programs].
Darmann-Finck, Ingrid; Duveneck, Nicole
2016-01-01
In the federal state of Bremen preliminary grades were included to the extent of 25 % in written, oral and practical final grades during the time period 2009-2014. The evaluation focuses on the effects of preliminary grades on the scale of final grades and the performance of learners as well as on the assessment of the appropriateness of final grades. A mixed-methods design was employed that consisted of a quasi-experimental study comprising of surveys of students and teachers of comparative and model courses as well as a qualitative study using group discussions. The results confirm that preliminary grades lead to a minimal improvement of the final grades of some exclusively low-achieving students. The assessment of appropriateness hardly changed. From both learners' and teachers' point of view there is still great dissatisfaction concerning the practical final grades. With regard to learning habits an increased willingness to learn new skills on the one hand and a partly increased performance pressure on the other hand were demonstrated. On the basis of these research results, the authors recommend the regular introduction of preliminary marks into the nursing training. Copyright © 2016. Published by Elsevier GmbH.
Microstructure Modeling of 3rd Generation Disk Alloys
NASA Technical Reports Server (NTRS)
Jou, Herng-Jeng
2010-01-01
The objective of this program is to model, validate, and predict the precipitation microstructure evolution, using PrecipiCalc (QuesTek Innovations LLC) software, for 3rd generation Ni-based gas turbine disc superalloys during processing and service, with a set of logical and consistent experiments and characterizations. Furthermore, within this program, the originally research-oriented microstructure simulation tool will be further improved and implemented to be a useful and user-friendly engineering tool. In this report, the key accomplishment achieved during the second year (2008) of the program is summarized. The activities of this year include final selection of multicomponent thermodynamics and mobility databases, precipitate surface energy determination from nucleation experiment, multiscale comparison of predicted versus measured intragrain precipitation microstructure in quench samples showing good agreement, isothermal coarsening experiment and interaction of grain boundary and intergrain precipitates, primary microstructure of subsolvus treatment, and finally the software implementation plan for the third year of the project. In the following year, the calibrated models and simulation tools will be validated against an independently developed experimental data set, with actual disc heat treatment process conditions. Furthermore, software integration and implementation will be developed to provide material engineers valuable information in order to optimize the processing of the 3rd generation gas turbine disc alloys.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Cappers, Peter; Scheer, Rich
Time-based rate programs, enabled by utility investments in advanced metering infrastructure (AMI), are increasingly being considered by utilities as tools to reduce peak demand and enable customers to better manage consumption and costs. Under the Smart Grid Investment Grant Program (SGIG), the U.S. Department of Energy (DOE) partnered with several electric utilities to conduct consumer behavior studies (CBS). The goals involved applying randomized and controlled experimental designs for estimating customer responses more precisely and credibly to advance understanding of time-based rates and customer systems, and provide new information for improving program designs, implementation strategies, and evaluations. The intent was tomore » produce more robust and credible analysis of impacts, costs, benefits, and lessons learned and assist utility and regulatory decision makers in evaluating investment opportunities involving time-based rates.« less
Stabilized Liner Compressor: The Return of Linus
NASA Astrophysics Data System (ADS)
Turchi, Peter; Frese, Sherry; Frese, Michael; Mielke, Charles; Hinrichs, Mark; Nguyen, Doan
2015-11-01
To access the lower cost regime of magneto-inertial fusion at megagauss magnetic field-levels requires the use of dynamic conductors in the form of imploding cylindrical shells, aka, liners. Such liner implosions can compress magnetic flux and plasma to attain fusion conditions, but are subject to Rayleigh-Taylor instabilities, both in the launch and recovery of the liner material and in the final few diameters of implosion. These instabilities were overcome in the Linus program at the Naval Research Laboratory, c. 1979, providing the experimentally-demonstrated basis for repetitive operation and leading to an economical reactor concept at low fusion gain. The recent ARPA-E program for low-cost fusion technology has revived interest in this approach. We shall discuss progress in modeling and design of a Stabilized Liner Compressor (SLC) that extends the earlier work to higher pressures and liner speeds appropriate to potential plasma targets. Sponsored by ARPA-E ALPHA Program.
High temperature static strain gage alloy development program
NASA Technical Reports Server (NTRS)
Hulse, C. O.; Bailey, R. S.; Lemkey, F. D.
1985-01-01
The literature, applicable theory and finally an experimental program were used to identify new candidate alloy systems for use as the electrical resistance elements in static strain gages up to 1250K. The program goals were 50 hours of use in the environment of a test stand gas turbine engine with measurement accuracies equal to or better than 10 percent of full scale for strains up to + or - 2000 microstrain. As part of this effort, a computerized electrical resistance measurement system was constructed for use at temperatures between 300K and 1250K and heating and cooling rates of 250K/min and 10K/min. The two best alloys were an iron-chromium-aluminum alloy and a palladium base alloy. Although significant progress was made, it was concluded that a considerable additional effort would be needed to fully optimize and evaluate these candidate systems.
Nonlinear-programming mathematical modeling of coal blending for power plant
DOE Office of Scientific and Technical Information (OSTI.GOV)
Tang Longhua; Zhou Junhu; Yao Qiang
At present most of the blending works are guided by experience or linear-programming (LP) which can not reflect the coal complicated characteristics properly. Experimental and theoretical research work shows that most of the coal blend properties can not always be measured as a linear function of the properties of the individual coals in the blend. The authors introduced nonlinear functions or processes (including neural network and fuzzy mathematics), established on the experiments directed by the authors and other researchers, to quantitatively describe the complex coal blend parameters. Finally nonlinear-programming (NLP) mathematical modeling of coal blend is introduced and utilized inmore » the Hangzhou Coal Blending Center. Predictions based on the new method resulted in different results from the ones based on LP modeling. The authors concludes that it is very important to introduce NLP modeling, instead of NL modeling, into the work of coal blending.« less
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-24
... experimental design, duration of the study, and the method of barred owl removal. Background The Service listed... and nonlethal), and the type of experimental design (demography vs. occupancy). All action...-FF01E00000] Experimental Removal of Barred Owls To Benefit Threatened Northern Spotted Owls; Final...
On program restructuring, scheduling, and communication for parallel processor systems
DOE Office of Scientific and Technical Information (OSTI.GOV)
Polychronopoulos, Constantine D.
1986-08-01
This dissertation discusses several software and hardware aspects of program execution on large-scale, high-performance parallel processor systems. The issues covered are program restructuring, partitioning, scheduling and interprocessor communication, synchronization, and hardware design issues of specialized units. All this work was performed focusing on a single goal: to maximize program speedup, or equivalently, to minimize parallel execution time. Parafrase, a Fortran restructuring compiler was used to transform programs in a parallel form and conduct experiments. Two new program restructuring techniques are presented, loop coalescing and subscript blocking. Compile-time and run-time scheduling schemes are covered extensively. Depending on the program construct, thesemore » algorithms generate optimal or near-optimal schedules. For the case of arbitrarily nested hybrid loops, two optimal scheduling algorithms for dynamic and static scheduling are presented. Simulation results are given for a new dynamic scheduling algorithm. The performance of this algorithm is compared to that of self-scheduling. Techniques for program partitioning and minimization of interprocessor communication for idealized program models and for real Fortran programs are also discussed. The close relationship between scheduling, interprocessor communication, and synchronization becomes apparent at several points in this work. Finally, the impact of various types of overhead on program speedup and experimental results are presented.« less
2014-08-15
CAPE CANAVERAL, Fla. – Former astronaut Greg Johnson, at left, executive director of the Center for the Advancement of Science in Space, and NASA Kennedy Space Center Director Bob Cabana, visit with Florida middle school students and their teachers before the start of the Zero Robotics finals competition at NASA Kennedy Space Center's Space Station Processing Facility in Florida. Students designed software to control Synchronized Position Hold Engage and Reorient Experimental Satellites, or SPHERES, and competed with other teams locally. The Zero Robotics is a robotics programming competition where the robots are SPHERES. The competition starts online, where teams program the SPHERES to solve an annual challenge. After several phases of virtual competition in a simulation environment that mimics the real SPHERES, finalists are selected to compete in a live championship aboard the space station. Students compete to win a technically challenging game by programming their strategies into the SPHERES satellites. The programs are autonomous and the students cannot control the satellites during the test. Photo credit: NASA/Daniel Casper
Doctoral training in behavior analysis: Training generalized problem-solving skills
Chase, Philip N.; Wylie, Ruth G.
1985-01-01
This essay provides guidelines for designing a doctoral program in behavior analysis. First, we propose a general accomplishment for all behavior analytic doctoral students: that they be able to solve problems concerning individual behavior within a range of environments. Second, in order to achieve this goal, we propose that students be trained in conceptual and experimental analysis of behavior, the application of behavioral principles and the administration of behavioral programs. This training should include class work, but it should emphasize the immersion of students in a variety of environments in which they are required to use behavior analytic strategies. Third, we provide an example of a hypothetical graduate program that involves the proposed training. Finally, an evaluation plan is suggested for determining whether a training program is in fact producing students who are generalized problem-solvers. At each step, we justify our point of view from a perspective that combines principles from behavior analysis and educational systems design. PMID:22478633
Single Axis Flywheel IPACS @1300W, 0.8 N-m
NASA Technical Reports Server (NTRS)
Jansen, Ralph; Kenny, Barbara; Kascak, Peter; Dever, Tim; Santiago, Walter
2005-01-01
NASA Glenn Research Center is developing flywheels for space systems. A single axis laboratory version of an integrated power and attitude control (IPACs) system has been experimentally demonstrated. This is a significant step on the road to a flight qualified three axes IPACS system. The presentation outlines the flywheel development process at NASA GRC, the experimental hardware and approach, the IPACS control algorithm that was formulated and the results of the test program and then proposes a direction for future work. GRC has made progress on flywheel module design in terms of specific energy density and capability through a design and test program resulting in three flywheel module designs. Two of the flywheels are used in the 1D-IPACS experiment with loads and power sources to simulate a satellite power system. The system response is measured in three power modes: charge, discharge, and charge reduction while simultaneously producing a net output torque which could be used for attitude control. Finally, recommendations are made for steps that should be taken to evolve from this laboratory demonstration to a flight like system.
Automated solar panel assembly line
NASA Technical Reports Server (NTRS)
Somberg, H.
1981-01-01
The initial stage of the automated solar panel assembly line program was devoted to concept development and proof of approach through simple experimental verification. In this phase, laboratory bench models were built to demonstrate and verify concepts. Following this phase was machine design and integration of the various machine elements. The third phase was machine assembly and debugging. In this phase, the various elements were operated as a unit and modifications were made as required. The final stage of development was the demonstration of the equipment in a pilot production operation.
Structure Functions of Bound Neutrons
DOE Office of Scientific and Technical Information (OSTI.GOV)
Sebastian Kuhn
2005-04-01
We describe an experiment measuring electron scattering on a neutron bound in deuterium with coincident detection of a fast, backward-going spectator proton. Our data map out the relative importance of the pure PWIA spectator mechanism and final state interactions in various kinematic regions, and give a first glimpse of the modification of the structure function of a bound neutron as a function of its off-shell mass. We also discuss a new experimental program to study the structure of a free neutron by extending the same technique to much lower spectator momenta.
Skylab SO71/SO72 circadian periodicity experiment. [experimental design and checkout of hardware
NASA Technical Reports Server (NTRS)
Fairchild, M. K.; Hartmann, R. A.
1973-01-01
The circadian rhythm hardware activities from 1965 through 1973 are considered. A brief history of the programs leading to the development of the combined Skylab SO71/SO72 Circadian Periodicity Experiment (CPE) is given. SO71 is the Skylab experiment number designating the pocket mouse circadian experiment, and SO72 designates the vinegar gnat circadian experiment. Final design modifications and checkout of the CPE, integration testing with the Apollo service module CSM 117 and the launch preparation and support tasks at Kennedy Space Center are reported.
Langley Aerothermodynamic Facilities Complex: Enhancements and Testing Capabilities
NASA Technical Reports Server (NTRS)
Micol, J. R.
1998-01-01
Description, capabilities, recent upgrades, and utilization of the NASA Langley Research Center (LaRC) Aerothermodynamic Facilities Complex (AFC) are presented. The AFC consists of five hypersonic, blow-down-to-vacuum wind tunnels that collectively provide a range of Mach number from 6 to 20, unit Reynolds number from 0.04 to 22 million per foot and, most importantly for blunt configurations, normal shock density ratio from 4 to 12. These wide ranges of hypersonic simulation parameters are due, in part, to the use of three different test gases (air, helium, and tetrafluoromethane), thereby making several of the facilities unique. The Complex represents nearly three-fourths of the conventional (as opposed to impulse)-type hypersonic wind tunnels operational in this country. AFC facilities are used to assess and optimize the hypersonic aerodynamic performance and aeroheating characteristics of aerospace vehicle concepts and to provide benchmark aerodynamic/aeroheating data fr generating the flight aerodynamic databook and final design of the thermal protection system (TPS) (e.g., establishment of flight limitations not to exceed TPS design limits). Modifications and enhancements of AFC hardware components and instrumentation have been pursued to increase capability, reliability, and productivity in support of programmatic goals. Examples illustrating facility utilization in recent years to generate essentially all of the experimental hypersonic aerodynamic and aeroheating information for high-priority, fast-paced Agency programs are presented. These programs include Phase I of the Reusable Launch Vehicle (RLV) Advanced Technology Demonstrator, X-33 program, PHase II of the X-33 program, X-34 program, the Hyper-X program ( a Mach 5,7, and 10 airbreathing propulsion flight experiment), and the X-38 program (Experimental Crew Return Vehicle, X-CRV). Current upgrades/enchancements and future plans for the AFC are discussed.
78 FR 79613 - Final Requirement-Migrant Education Program Consortium Incentive Grant Program
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-31
... DEPARTMENT OF EDUCATION 34 CFR Chapter II [CFDA Number 84.144F] Final Requirement--Migrant Education Program Consortium Incentive Grant Program AGENCY: Office of Elementary and Secondary Education, Department of Education. ACTION: Final requirement. SUMMARY: The Assistant Secretary for Elementary and...
KAVEH, MOHAMMAD HOSSIEN; MORADI, LEILA; GHAHREMANI, LEILA; TABATABAEE, HAMID REZA
2014-01-01
Introduction: One of the main determinants of adolescents’ life satisfaction is parenting skills. Due to the lack of educational trials in this field, this research was done to evaluate the effect of a parenting education program on girls’ life satisfaction in governmental guidance schools of Shiraz. Methods: This study is an educational randomized controlled trial. At first, 152 female students in 2nd grade of governmental guidance schools and 304 parents (152 mother and 152 father) were selected by multistage random cluster sampling method. Then, they were categorized into experimental and control groups. Before and after the intervention, data were collected from two groups using multidimensional students’ life satisfaction scale with stability (Cronbach's alpha=0.89), test–retest and correlation coefficient (r=0.70). Educational intervention for parents was performed in the experimental group through presentations with question and answer, discussion in small groups and distribution of educational booklets in 5 volumes. Finally, the data were analyzed using SPSS 14 and through Mann-Whitney test, Chi-square test, Fisher’s Exact test, Wilcoxon test. Results: Before the intervention, the experimental and control groups did not show a statistically significant difference based on the demographic variables. Thetotal of life satisfaction scores and also its subscales in the experimental and controlgroup, before and six weeks afterthe educational interventiondid showstatisticallysignificant difference (p<0.001). The scores of differences (pre-test/post-test) in total life satisfaction between the experimental and control groups were statistically significant difference (p<0.001). Conclusion: According to low scores of the students in the pre-test, especially in the control group which didn’t undergo any educational program, holding scheduled educational intervention is necessary. This study not only supports the effectiveness of educational intervention but also recommends further educational research to develop knowledge regarding patterns of parenting education. PMID:25512913
Coal technology program progress report, February 1976
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
Final testing of the 20-atm bench-scale system is underway in preparation for experiments with hydrogen. Laboratory-scale testing of a number of inexpensive pure compounds to improve the settling rate of solids in Solvent Refined Coal (SRC) unfiltered oil (UFO), bench-scale testing of the effect of the Tretolite additive on settling, and characterization tests on a new sample of UFO from the PAMCO-SRC process are reported. Experimental engineering support of an in situ gasification process include low-temperature pyrolyses at exceptionally low heating rates (0.3/sup 0/C/min). Highly pyrophoric chars were consistently produced. Aqueous by-products from coal conversion technologies and oil shale retortingmore » have been analyzed directly to determine major organic components. A report is being prepared discussing various aspects of the engineering evaluations of nuclear process heat for coal. A bench-scale test program on thermochemical water splitting for hydrogen production is under consideration. In the coal-fueled MIUS program, preparations for procurement of tubing for the matrix in the fluidized-bed furnace and for fabrication of the furnace continued. Analyses of the AiResearch gas turbine and recuperator under coal-fueled MIUS operating conditions are near completion. Process flow diagrams and heat and material balances were completed for most of the units in the synthoil process. Overall utilities requirements were calculated and the coal preparation flowsheets were finalized. For hydrocarbonization, the flowsheet was revised to include additional coal data. Flowsheets were finalized for the acid gas separation and recycle, and the oil-solids separation. (LTN)« less
Fernandez, Elizabeth; Bergado Rosado, Jorge A.; Rodriguez Perez, Daymi; Salazar Santana, Sonia; Torres Aguilar, Maydane; Bringas, Maria Luisa
2017-01-01
Many training programs have been designed using modern software to restore the impaired cognitive functions in patients with acquired brain damage (ABD). The objective of this study was to evaluate the effectiveness of a computer-based training program of attention and memory in patients with ABD, using a two-armed parallel group design, where the experimental group (n = 50) received cognitive stimulation using RehaCom software, and the control group (n = 30) received the standard cognitive stimulation (non-computerized) for eight weeks. In order to assess the possible cognitive changes after the treatment, a post-pre experimental design was employed using the following neuropsychological tests: Wechsler Memory Scale (WMS) and Trail Making test A and B. The effectiveness of the training procedure was statistically significant (p < 0.05) when it established the comparison between the performance in these scales, before and after the training period, in each patient and between the two groups. The training group had statistically significant (p < 0.001) changes in focused attention (Trail A), two subtests (digit span and logical memory), and the overall score of WMS. Finally, we discuss the advantages of computerized training rehabilitation and further directions of this line of work. PMID:29301194
Wen, L; Wang, T M; Wu, G H; Liang, J H
2012-09-01
We implement a mackerel (Scomber scombrus) body-shaped robot, programmed to display the three most typical body/caudal fin undulatory kinematics (i.e. anguilliform, carangiform and thunniform), in order to biomimetically investigate hydrodynamic issues not easily tackled experimentally with live fish. The robotic mackerel, mounted on a servo towing system and initially at rest, can determine its self-propelled speed by measuring the external force acting upon it and allowing for the simultaneous measurement of power, flow field and self-propelled speed. Experimental results showed that the robotic swimmer with thunniform kinematics achieved a faster final swimming speed (St = 0.424) relative to those with carangiform (St = 0.43) and anguilliform kinematics (St = 0.55). The thrust efficiency, estimated from a digital particle image velocimetry (DPIV) flow field, showed that the robotic swimmer with thunniform kinematics is more efficient (47.3%) than those with carangiform (31.4%) and anguilliform kinematics (26.6%). Furthermore, the DPIV measurements illustrate that the large-scale characteristics of the flow pattern generated by the robotic swimmer with both anguilliform and carangiform kinematics were wedge-like, double-row wake structures. Additionally, a typical single-row reverse Karman vortex was produced by the robotic swimmer using thunniform kinematics. Finally, we discuss this novel force-feedback-controlled experimental method, and review the relative self-propelled hydrodynamic results of the robot when utilizing the three types of undulatory kinematics.
A Data Analysis Center for Electromagnetic and Hadronic Interaction. Products of the DAC members
DOE Office of Scientific and Technical Information (OSTI.GOV)
Briscoe, William John; Strakovsky, Igor I.; Workman, Ronald L.
The Data Analysis Center (DAC) of the Center for Nuclear Studies (CNS) at the George Washington University (GW) has made significant progress in its program to enhance and expand the partial-wave (and multipole) analyses of fundamental two- and three-body reactions (such as pion-nucleon, photon-nucleon, and nucleon-nucleon scattering) by maintaining and augmenting the analysis codes and databases associated with these reactions. These efforts provide guidance to experimental groups at the international level, forming an important link between theory and experiment. A renaissance in light hadron spectroscopy is underway as a continuous stream of polarization data issues from existing precision electromagnetic facilitiesmore » and the coming Jefferson Lab 12 GeV Upgrade. Our principal goals have been focused on supporting the national N* resonance physics program. We have also continued to study topics more generally related to the problems associated with partial-wave analysis. On the Experimental side of the CNS DAC. Its primary goal is the enhancement of the body of data necessary for our analyses of fundamental γ - N reactions. We perform experiments that study the dynamics responsible for the internal structure of the nucleon and its excitations. Our principal focus is on the N* programs at JLab and MAMI. At JLab we study spin-polarization observables using polarized photons, protons and neutrons and yielding charged final states. Similarly at MAMI we study neutral meson photoproduction off polarized protons and neutrons. We use the Crystal Ball and TAPS spectrometers (CBT) to detect photons and neutrons to measure the photoproduction of π0, η, 2π0, π0η, and K0 off the neutron. The CBT program complements our program at JLab, which studies reactions resulting in charged final states. We are also involved in a renewed effort to make neutral pion photoproduction measurements close to threshold at Mainz. In addition to the programs underway, we are contributing to the future by participation in preparations for the coming JLab 12 GeV Upgrade. GW students are involved in tests of the detectors proposed to be used with CLAS12, i.e., for the CentralTime-of-Flight Barrel (CTOF). WJB is heavily involved in the MUSE quest at PSI to solve the Proton Radius Puzzle.« less
NASA's Space Environments and Effects Program: Technology for the New Millennium
NASA Technical Reports Server (NTRS)
Hardage, Donna M.; Pearson, Steven D.
2000-01-01
Current trends in spacecraft development include the use of advanced technologies while maintaining the "faster, better, cheaper" philosophy. Spacecraft designers are continually designing with smaller and faster electronics as well as lighter and thinner materials providing better performance, lower weight, and ultimately lower costs. Given this technology trend, spacecraft will become increasingly susceptible to the harsh space environments, causing damaging or even disabling effects on space systems. NASA's Space Environments and Effects (SEE) Program defines the space environments and provides advanced technology development to support the design, development, and operation of spacecraft systems that will accommodate or mitigate effects due to the harsh space environments. This Program provides a comprehensive and focused approach to understanding the space environment, to define the best techniques for both flight and ground-based experimentation, to update the models which predict both the environments and the environmental effects on spacecraft, and finally to ensure that this multitudinous information is properly maintained and inserted into spacecraft design programs. A description of the SEE Program, its accomplishments, and future activities is provided.
77 FR 69788 - Colorado: Final Authorization of State Hazardous Waste Management Program Revisions
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-21
...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... authorization of changes to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA). The EPA proposes to grant final authorization to the hazardous waste program changes submitted by the...
An open experimental database for exploring inorganic materials
Zakutayev, Andriy; Wunder, Nick; Schwarting, Marcus; ...
2018-04-03
The use of advanced machine learning algorithms in experimental materials science is limited by the lack of sufficiently large and diverse datasets amenable to data mining. If publicly open, such data resources would also enable materials research by scientists without access to expensive experimental equipment. Here, we report on our progress towards a publicly open High Throughput Experimental Materials (HTEM) Database (htem.nrel.gov). This database currently contains 140,000 sample entries, characterized by structural (100,000), synthetic (80,000), chemical (70,000), and optoelectronic (50,000) properties of inorganic thin film materials, grouped in >4,000 sample entries across >100 materials systems; more than a half ofmore » these data are publicly available. This article shows how the HTEM database may enable scientists to explore materials by browsing web-based user interface and an application programming interface. This paper also describes a HTE approach to generating materials data, and discusses the laboratory information management system (LIMS), that underpin HTEM database. Finally, this manuscript illustrates how advanced machine learning algorithms can be adopted to materials science problems using this open data resource.« less
An open experimental database for exploring inorganic materials.
Zakutayev, Andriy; Wunder, Nick; Schwarting, Marcus; Perkins, John D; White, Robert; Munch, Kristin; Tumas, William; Phillips, Caleb
2018-04-03
The use of advanced machine learning algorithms in experimental materials science is limited by the lack of sufficiently large and diverse datasets amenable to data mining. If publicly open, such data resources would also enable materials research by scientists without access to expensive experimental equipment. Here, we report on our progress towards a publicly open High Throughput Experimental Materials (HTEM) Database (htem.nrel.gov). This database currently contains 140,000 sample entries, characterized by structural (100,000), synthetic (80,000), chemical (70,000), and optoelectronic (50,000) properties of inorganic thin film materials, grouped in >4,000 sample entries across >100 materials systems; more than a half of these data are publicly available. This article shows how the HTEM database may enable scientists to explore materials by browsing web-based user interface and an application programming interface. This paper also describes a HTE approach to generating materials data, and discusses the laboratory information management system (LIMS), that underpin HTEM database. Finally, this manuscript illustrates how advanced machine learning algorithms can be adopted to materials science problems using this open data resource.
An open experimental database for exploring inorganic materials
Zakutayev, Andriy; Wunder, Nick; Schwarting, Marcus; Perkins, John D.; White, Robert; Munch, Kristin; Tumas, William; Phillips, Caleb
2018-01-01
The use of advanced machine learning algorithms in experimental materials science is limited by the lack of sufficiently large and diverse datasets amenable to data mining. If publicly open, such data resources would also enable materials research by scientists without access to expensive experimental equipment. Here, we report on our progress towards a publicly open High Throughput Experimental Materials (HTEM) Database (htem.nrel.gov). This database currently contains 140,000 sample entries, characterized by structural (100,000), synthetic (80,000), chemical (70,000), and optoelectronic (50,000) properties of inorganic thin film materials, grouped in >4,000 sample entries across >100 materials systems; more than a half of these data are publicly available. This article shows how the HTEM database may enable scientists to explore materials by browsing web-based user interface and an application programming interface. This paper also describes a HTE approach to generating materials data, and discusses the laboratory information management system (LIMS), that underpin HTEM database. Finally, this manuscript illustrates how advanced machine learning algorithms can be adopted to materials science problems using this open data resource. PMID:29611842
An open experimental database for exploring inorganic materials
DOE Office of Scientific and Technical Information (OSTI.GOV)
Zakutayev, Andriy; Wunder, Nick; Schwarting, Marcus
The use of advanced machine learning algorithms in experimental materials science is limited by the lack of sufficiently large and diverse datasets amenable to data mining. If publicly open, such data resources would also enable materials research by scientists without access to expensive experimental equipment. Here, we report on our progress towards a publicly open High Throughput Experimental Materials (HTEM) Database (htem.nrel.gov). This database currently contains 140,000 sample entries, characterized by structural (100,000), synthetic (80,000), chemical (70,000), and optoelectronic (50,000) properties of inorganic thin film materials, grouped in >4,000 sample entries across >100 materials systems; more than a half ofmore » these data are publicly available. This article shows how the HTEM database may enable scientists to explore materials by browsing web-based user interface and an application programming interface. This paper also describes a HTE approach to generating materials data, and discusses the laboratory information management system (LIMS), that underpin HTEM database. Finally, this manuscript illustrates how advanced machine learning algorithms can be adopted to materials science problems using this open data resource.« less
NASA Astrophysics Data System (ADS)
Wilcox, William Edward, Jr.
1995-01-01
A computer program (LIDAR-PC) and associated atmospheric spectral databases have been developed which accurately simulate the laser remote sensing of the atmosphere and the system performance of a direct-detection Lidar or tunable Differential Absorption Lidar (DIAL) system. This simulation program allows, for the first time, the use of several different large atmospheric spectral databases to be coupled with Lidar parameter simulations on the same computer platform to provide a real-time, interactive, and easy to use design tool for atmospheric Lidar simulation and modeling. LIDAR -PC has been used for a range of different Lidar simulations and compared to experimental Lidar data. In general, the simulations agreed very well with the experimental measurements. In addition, the simulation offered, for the first time, the analysis and comparison of experimental Lidar data to easily determine the range-resolved attenuation coefficient of the atmosphere and the effect of telescope overlap factor. The software and databases operate on an IBM-PC or compatible computer platform, and thus are very useful to the research community for Lidar analysis. The complete Lidar and atmospheric spectral transmission modeling program uses the HITRAN database for high-resolution molecular absorption lines of the atmosphere, the BACKSCAT/LOWTRAN computer databases and models for the effects of aerosol and cloud backscatter and attenuation, and the range-resolved Lidar equation. The program can calculate the Lidar backscattered signal-to-noise for a slant path geometry from space and simulate the effect of high resolution, tunable, single frequency, and moderate line width lasers on the Lidar/DIAL signal. The program was used to model and analyze the experimental Lidar data obtained from several measurements. A fixed wavelength, Ho:YSGG aerosol Lidar (Sugimoto, 1990) developed at USF and a tunable Ho:YSGG DIAL system (Cha, 1991) for measuring atmospheric water vapor at 2.1 μm were analyzed. The simulations agreed very well with the measurements, and also yielded, for the first time, the ability to easily deduce the atmospheric attentuation coefficient, alpha, from the Lidar data. Simulations and analysis of other Lidar measurements included that of a 1.57 mu m OPO aerosol Lidar system developed at USF (Harrell, 1995) and of the NASA LITE (Laser-in-Space Technology Experiment) Lidar recently flown in the Space shuttle. Finally, an extensive series of laboratory experiments were made with the 1.57 μm OPO Lidar system to test calculations of the telescope/laser overlap and the effect of different telescope sizes and designs. The simulations agreed well with the experimental data for the telescope diameter and central obscuration test cases. The LIDAR-PC programs are available on the Internet from the USAF Lidar Home Page Web site, http://www.cas.usf.edu/physics/lidar.html/.
Cooled variable-area radial turbine technology program
NASA Technical Reports Server (NTRS)
Large, G. D.; Meyer, L. J.
1982-01-01
The objective of this study was a conceptual evaluation and design analyses of a cooled variable-area radial turbine capable of maintaining nearly constant high efficiency when operated at a constant speed and pressure ratio over a range of flows corresponding to 50- to 100-percent maximum engine power. The results showed that a 1589K (2400 F) turbine was feasible that would satisfy a 4000-hour duty cycle life goal. The final design feasibility is based on 1988 material technology goals. A peak aerodynamic stage total efficiency of 0.88 was predicted at 100 percent power. Two candidate stators were identified: an articulated trailing-edge and a locally movable sidewall. Both concepts must be experimentally evaluated to determine the optimum configuration. A follow-on test program is proposed for this evaluation.
IOTA (Integrable Optics Test Accelerator): Facility and experimental beam physics program
DOE Office of Scientific and Technical Information (OSTI.GOV)
Antipov, Sergei; Broemmelsiek, Daniel; Bruhwiler, David
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning andmore » research. Finally, the physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.« less
IOTA (Integrable Optics Test Accelerator): Facility and experimental beam physics program
Antipov, Sergei; Broemmelsiek, Daniel; Bruhwiler, David; ...
2017-03-06
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning andmore » research. Finally, the physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.« less
CFD Analysis in Advance of the NASA Juncture Flow Experiment
NASA Technical Reports Server (NTRS)
Lee, H. C.; Pulliam, T. H.; Neuhart, D. H.; Kegerise, M. A.
2017-01-01
NASA through its Transformational Tools and Technologies Project (TTT) under the Advanced Air Vehicle Program, is supporting a substantial effort to investigate the formation and origin of separation bubbles found on wing-body juncture zones. The flow behavior in these regions is highly complex, difficult to measure experimentally, and challenging to model numerically. Multiple wing configurations were designed and evaluated using Computational Fluid Dynamics (CFD), and a series of wind tunnel risk reduction tests were performed to further down-select the candidates for the final experiment. This paper documents the CFD analysis done in conjunction with the 6 percent scale risk reduction experiment performed in NASA Langley's 14- by 22-Foot Subsonic Tunnel. The combined CFD and wind tunnel results ultimately helped the Juncture Flow committee select the wing configurations for the final experiment.
A study of the stress wave factor technique for the characterization of composite materials
NASA Technical Reports Server (NTRS)
Henneke, E. G., II; Duke, J. C., Jr.; Stinchcomb, W. W.; Govada, A.; Lemascon, A.
1983-01-01
A testing program was undertaken to provide an independent investigation and evaluation of the stress wave factor for characterizing the mechanical behavior of composite laminates. Some of the data which was obtained after performing a very large number of tests to determine the reproducibility of the SWF measurement is presented. It was determined that, with some optimizing of experimental parameters, the SWF value can be reproduced to within + or - 10%. Results are also given which show that, after careful calibration procedures, the lowest SWF value along the length of a specimen will correlate very closely to the site of final failure when the specimen is loaded in tension. Finally, using a moire interferometry technique, it was found that local regions having the highest in plane strains under tensile loading also had the lowest SWF values.
DOT National Transportation Integrated Search
2015-05-01
The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP composite piles for load-bearing in bridges. This report covers Task 7, Final Report - Thesis. : This final report covers Tasks 1, 2, 3, 5 ...
An experimental study of factors affecting the selective inhibition of sintering process
NASA Astrophysics Data System (ADS)
Asiabanpour, Bahram
Selective Inhibition of Sintering (SIS) is a new rapid prototyping method that builds parts in a layer-by-layer fabrication basis. SIS works by joining powder particles through sintering in the part's body, and by sintering inhibition of some selected powder areas. The objective of this research has been to improve the new SIS process, which has been invented at USC. The process improvement is based on statistical design of experiments. To conduct the needed experiments a working machine and related path generator software were needed. The machine and its control software were made available prior to this research. The path generator algorithms and software had to be created. This program should obtain model geometry data from a CAD file and generate an appropriate path file for the printer nozzle. Also, the program should generate a simulation file for path file inspection using virtual prototyping. The activities related to path generator constitute the first part of this research, which has resulted in an efficient path generator. In addition, to reach an acceptable level of accuracy, strength, and surface quality in the fabricated parts, all effective factors in the SIS process should be identified and controlled. Simultaneous analytical and experimental studies were conducted to recognize effective factors and to control the SIS process. Also, it was known that polystyrene was the most appropriate polymer powder and saturated potassium iodide was the most effective inhibitor among the available candidate materials. In addition, statistical tools were applied to improve the desirable properties of the parts fabricated by the SIS process. An investigation of part strength was conducted using the Response Surface Methodology (RSM) and a region of acceptable operating conditions for the part strength was found. Then, through analysis of the experimental results, the impact of the factors on the final part surface quality and dimensional accuracy was modeled. After developing a desirability function model, process operating conditions for maximum desirability were identified. Finally, the desirability model was validated.
DOT National Transportation Integrated Search
1991-06-01
This report documents the construction, initial evaluation and final evaluation of several experimental features which were incorporated as part of an overlay of an existing PCC pavement in order to determine the feasibility of extending the asphalti...
34 CFR 387.1 - What is the Experimental and Innovative Training Program?
Code of Federal Regulations, 2014 CFR
2014-07-01
... 34 Education 2 2014-07-01 2013-07-01 true What is the Experimental and Innovative Training Program...) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EXPERIMENTAL AND INNOVATIVE TRAINING General § 387.1 What is the Experimental and Innovative Training Program? This program is...
34 CFR 387.1 - What is the Experimental and Innovative Training Program?
Code of Federal Regulations, 2011 CFR
2011-07-01
... 34 Education 2 2011-07-01 2010-07-01 true What is the Experimental and Innovative Training Program...) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EXPERIMENTAL AND INNOVATIVE TRAINING General § 387.1 What is the Experimental and Innovative Training Program? This program is...
A small Unix-based data acquisition system
DOE Office of Scientific and Technical Information (OSTI.GOV)
Engberg, D.; Glanzman, T.
1994-02-01
The proposed SLAC B Factory detector plans to use Unix-based machines for all aspects of computing, including real-time data acquisition and experimental control. A R and D program has been established to investigate the use of Unix in the various aspects of experimental computation. Earlier R and D work investigated the basic real-time aspects of the IBM RS/6000 workstation running AIX, which claims to be a real-time operating system. The next step in this R and D is the construction of a prototype data acquisition system which attempts to exercise many of the features needed in the final on-line systemmore » in a realistic situation. For this project, the authors have combined efforts with a team studying the use of novel cell designs and gas mixtures in a new prototype drift chamber.« less
Energy Minimization of Molecular Features Observed on the (110) Face of Lysozyme Crystals
NASA Technical Reports Server (NTRS)
Perozzo, Mary A.; Konnert, John H.; Li, Huayu; Nadarajah, Arunan; Pusey, Marc
1999-01-01
Molecular dynamics and energy minimization have been carried out using the program XPLOR to check the plausibility of a model lysozyme crystal surface. The molecular features of the (110) face of lysozyme were observed using atomic force microscopy (AFM). A model of the crystal surface was constructed using the PDB file 193L, and was used to simulate an AFM image. Molecule translations, van der Waals radii, and assumed AFM tip shape were adjusted to maximize the correlation coefficient between the experimental and simulated images. The highest degree of 0 correlation (0.92) was obtained with the molecules displaced over 6 A from their positions within the bulk of the crystal. The quality of this starting model, the extent of energy minimization, and the correlation coefficient between the final model and the experimental data will be discussed.
Cultivation and breeding of Chinese medicinal plants in Germany.
Heuberger, Heidi; Bauer, Rudolf; Friedl, Fritz; Heubl, Günther; Hummelsberger, Josef; Nögel, Rainer; Seidenberger, Rebecca; Torres-Londoño, Paula
2010-12-01
Chinese herbal medicine (CHM) is increasingly used in Germany and Europe. Due to the need for herbal drugs of consistent quality and reliable supply, methods for commercial field cultivation and post-harvest processing under south German conditions have been developed for selected plant species used in CHM since 1999. The project used an interdisciplinary approach covering all aspects from seed sourcing to medicinal application. This paper describes the outcome of the agricultural seed and field experiments, breeding program, botanical and chemical characterization of the experimental material, comparison of experimental and imported herbal material with respect to their pharmaceutical quality, transfer of production methods and plant material to specialized farmers, medicinal application and, finally, information for users along the chain of distribution about the benefits of the locally produced herbal material. © Georg Thieme Verlag KG Stuttgart · New York.
MatLab program for precision calibration of optical tweezers
NASA Astrophysics Data System (ADS)
Tolić-Nørrelykke, Iva Marija; Berg-Sørensen, Kirstine; Flyvbjerg, Henrik
2004-06-01
Optical tweezers are used as force transducers in many types of experiments. The force they exert in a given experiment is known only after a calibration. Computer codes that calibrate optical tweezers with high precision and reliability in the ( x, y)-plane orthogonal to the laser beam axis were written in MatLab (MathWorks Inc.) and are presented here. The calibration is based on the power spectrum of the Brownian motion of a dielectric bead trapped in the tweezers. Precision is achieved by accounting for a number of factors that affect this power spectrum. First, cross-talk between channels in 2D position measurements is tested for, and eliminated if detected. Then, the Lorentzian power spectrum that results from the Einstein-Ornstein-Uhlenbeck theory, is fitted to the low-frequency part of the experimental spectrum in order to obtain an initial guess for parameters to be fitted. Finally, a more complete theory is fitted, a theory that optionally accounts for the frequency dependence of the hydrodynamic drag force and hydrodynamic interaction with a nearby cover slip, for effects of finite sampling frequency (aliasing), for effects of anti-aliasing filters in the data acquisition electronics, and for unintended "virtual" filtering caused by the position detection system. Each of these effects can be left out or included as the user prefers, with user-defined parameters. Several tests are applied to the experimental data during calibration to ensure that the data comply with the theory used for their interpretation: Independence of x- and y-coordinates, Hooke's law, exponential distribution of power spectral values, uncorrelated Gaussian scatter of residual values. Results are given with statistical errors and covariance matrix. Program summaryTitle of program: tweezercalib Catalogue identifier: ADTV Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland. Program Summary URL:http://cpc.cs.qub.ac.uk/summaries/ADTV Computer for which the program is designed and others on which it has been tested: General computer running MatLab (MathWorks Inc.). Programming language used: MatLab (MathWorks Inc.). Uses "Optimization Toolbox" and "Statistics Toolbox". Memory required to execute with typical data: Of order 4 times the size of the data file. High speed storage required: None No. of lines in distributed program, including test data, etc.: 133 183 No. of bytes in distributed program, including test data, etc.: 1 043 674 Distribution format: tar gzip file Nature of physical problem: Calibrate optical tweezers with precision by fitting theory to experimental power spectrum of position of bead doing Brownian motion in incompressible fluid, possibly near microscope cover slip, while trapped in optical tweezers. Thereby determine spring constant of optical trap and conversion factor for arbitrary-units-to-nanometers for detection system. Method of solution: Elimination of cross-talk between quadrant photo-diode's output channels for positions (optional). Check that distribution of recorded positions agrees with Boltzmann distribution of bead in harmonic trap. Data compression and noise reduction by blocking method applied to power spectrum. Full accounting for hydrodynamic effects: Frequency-dependent drag force and interaction with nearby cover slip (optional). Full accounting for electronic filters (optional), for "virtual filtering" caused by detection system (optional). Full accounting for aliasing caused by finite sampling rate (optional). Standard non-linear least-squares fitting. Statistical support for fit is given, with several plots suitable for inspection of consistency and quality of data and fit. Restrictions on the complexity of the problem: Data should be positions of bead doing Brownian motion while held by optical tweezers. For high precision in final results, data should be time series measured over a long time, with sufficiently high experimental sampling rate: The sampling rate should be well above the characteristic frequency of the trap, the so-called corner frequency. Thus, the sampling frequency should typically be larger than 10 kHz. The Fast Fourier Transform applied requires the time series to contain 2 n data points, and long measurement time is obtained with n>12-15. Finally, the optics should be set to ensure a harmonic trapping potential in the range of positions visited by the bead. The fitting procedure checks for harmonic potential. Typical running time: (Tens of) minutes Unusual features of the program: None References: The theoretical underpinnings for the procedure are found in [K. Berg-Sørensen, H. Flyvbjerg, Rev. Sci. Instrum. 75 (3) (2004) 594].
Kramer, Christopher D; Koch, William H; Fritz, Julie M
2013-01-01
Objectives: To describe a program to translate evidence into practice for the use of manipulation with a sub-group of patients with low back pain and report the program's outcomes following implementation. We compared outcomes based on appropriate inclusion in the program and compliance with the evidence being translated. Methods: The evidence translation program was based on evidence that patients meeting two criteria (duration of symptoms <16 days, no symptoms distal to knee) were likely to respond to a physical therapy that included manipulation in the first two visits. Implementation addressed potential barriers with referring physicians, physical therapists, and scheduling staff to this evidence. Outcomes for patients in the program were tracked following implementation. Process outcomes were appropriateness of inclusion (met both criteria), compliance with evidence for providing thrust manipulation in the first two visits, and number of physical therapy visits. Clinical outcomes were based on Oswestry scores from the first, interim (after two to three visits), and final visit. Results: A total of 577 patients entered the evidence translation program (mean age = 43.0, 56.8% female); 79.5% were appropriate inclusions and 83.0% received manipulation. The use of manipulation was associated with fewer visits (mean difference = 0.54 visits, 95% CI: 0.037, 1.04, P = 0.035), and appropriate inclusion was associated with greater Oswestry change (mean difference at the final visit = 6.6 points, 95% CI: 1.6, 11.6; P = 0.010). Discussion: Implementing evidence into practice is difficult; however, barriers can be anticipated and overcome. Tracking the outcomes of an implementation program is critical to evaluating its benefit to patients. Additional research using experimental designs are necessary to evaluate the effectiveness of various treatments implemented in physical therapy practice. PMID:24421630
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-07
... 507 acres of real estate containing the CDC/NIOSH's Lake Lynn Experimental Mine located in Springhill... mine tunnels servicing the Experimental Mine. The purpose and need of the proposed acquisition and construction improvements secures the currently leased Experimental Mine for the long-term continuation of mine...
Performance Evaluation in Network-Based Parallel Computing
NASA Technical Reports Server (NTRS)
Dezhgosha, Kamyar
1996-01-01
Network-based parallel computing is emerging as a cost-effective alternative for solving many problems which require use of supercomputers or massively parallel computers. The primary objective of this project has been to conduct experimental research on performance evaluation for clustered parallel computing. First, a testbed was established by augmenting our existing SUNSPARCs' network with PVM (Parallel Virtual Machine) which is a software system for linking clusters of machines. Second, a set of three basic applications were selected. The applications consist of a parallel search, a parallel sort, a parallel matrix multiplication. These application programs were implemented in C programming language under PVM. Third, we conducted performance evaluation under various configurations and problem sizes. Alternative parallel computing models and workload allocations for application programs were explored. The performance metric was limited to elapsed time or response time which in the context of parallel computing can be expressed in terms of speedup. The results reveal that the overhead of communication latency between processes in many cases is the restricting factor to performance. That is, coarse-grain parallelism which requires less frequent communication between processes will result in higher performance in network-based computing. Finally, we are in the final stages of installing an Asynchronous Transfer Mode (ATM) switch and four ATM interfaces (each 155 Mbps) which will allow us to extend our study to newer applications, performance metrics, and configurations.
BEST (Better Educational Skills Training). Final Report.
ERIC Educational Resources Information Center
Vermont Adult Learning, Rutland.
This document contains a final report, evaluation report, and materials from the Better Educational Skills Training (BEST) workplace literacy program in Vermont. The seven-page final report describes program components: (1) expanding and institutionalizing the workplace literacy program developed through two previous national workplace literacy…
75 FR 71325 - Wildlife Habitat Incentive Program
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-23
... Wildlife Habitat Incentive Program AGENCY: Commodity Credit Corporation, Natural Resources Conservation... final rule for the Wildlife Habitat Incentive Program (WHIP). This final rule sets forth how NRCS, using... Albert Cerna, National Wildlife Habitat Incentive Program Manager, Financial Assistance Programs Division...
NASA Astrophysics Data System (ADS)
Križan, Peter; Matúš, Miloš; Beniak, Juraj; Šooš, Ľubomír
2018-01-01
During the biomass densification can be recognized various technological variables and also material parameters which significantly influences the final solid biofuels (pellets) quality. In this paper, we will present the research findings concerning relationships between technological and material variables during densification of sunflower hulls. Sunflower hulls as an unused source is a typical product of agricultural industry in Slovakia and belongs to the group of herbaceous biomass. The main goal of presented experimental research is to determine the impact of compression pressure, compression temperature and material particle size distribution on final biofuels quality. Experimental research described in this paper was realized by single-axis densification, which was represented by experimental pressing stand. The impact of mentioned investigated variables on the final briquettes density and briquettes dilatation was determined. Mutual interactions of these variables on final briquettes quality are showing the importance of mentioned variables during the densification process. Impact of raw material particle size distribution on final biofuels quality was also proven by experimental research on semi-production pelleting plant.
Advanced high temperature static strain sensor development
NASA Technical Reports Server (NTRS)
Hulse, C. O.; Stetson, K. A.; Grant, H. P.; Jameikis, S. M.; Morey, W. W.; Raymondo, P.; Grudkowski, T. W.; Bailey, R. S.
1986-01-01
An examination was made into various techniques to be used to measure static strain in gas turbine liners at temperatures up to 1150 K (1600 F). The methods evaluated included thin film and wire resistive devices, optical fibers, surface acoustic waves, the laser speckle technique with a heterodyne readout, optical surface image and reflective approaches and capacitive devices. A preliminary experimental program to develop a thin film capacitive device was dropped because calculations showed that it would be too sensitive to thermal gradients. In a final evaluation program, the laser speckle technique appeared to work well up to 1150 K when it was used through a relatively stagnant air path. The surface guided acoustic wave approach appeared to be interesting but to require too much development effort for the funds available. Efforts to develop a FeCrAl resistive strain gage system were only partially successful and this part of the effort was finally reduced to a characterization study of the properties of the 25 micron diameter FeCrAl (Kanthal A-1) wire. It was concluded that this particular alloy was not suitable for use as the resistive element in a strain gage above about 1000 K.
Advanced high temperature static strain sensor development
NASA Astrophysics Data System (ADS)
Hulse, C. O.; Stetson, K. A.; Grant, H. P.; Jameikis, S. M.; Morey, W. W.; Raymondo, P.; Grudkowski, T. W.; Bailey, R. S.
1986-08-01
An examination was made into various techniques to be used to measure static strain in gas turbine liners at temperatures up to 1150 K (1600 F). The methods evaluated included thin film and wire resistive devices, optical fibers, surface acoustic waves, the laser speckle technique with a heterodyne readout, optical surface image and reflective approaches and capacitive devices. A preliminary experimental program to develop a thin film capacitive device was dropped because calculations showed that it would be too sensitive to thermal gradients. In a final evaluation program, the laser speckle technique appeared to work well up to 1150 K when it was used through a relatively stagnant air path. The surface guided acoustic wave approach appeared to be interesting but to require too much development effort for the funds available. Efforts to develop a FeCrAl resistive strain gage system were only partially successful and this part of the effort was finally reduced to a characterization study of the properties of the 25 micron diameter FeCrAl (Kanthal A-1) wire. It was concluded that this particular alloy was not suitable for use as the resistive element in a strain gage above about 1000 K.
Digital image profilers for detecting faint sources which have bright companions, phase 2
NASA Technical Reports Server (NTRS)
Morris, Elena; Flint, Graham
1991-01-01
A breadboard image profiling system developed for the first phase of this project demonstrated the potential for detecting extremely faint optical sources in the presence of light companions. Experimental data derived from laboratory testing of the device supports the theory that image profilers of this type may approach the theoretical limit imposed by photon statistics. The objective of Phase 2 of this program is the development of a ground-based multichannel image profiling system capable of detecting faint stellar objects slightly displaced from brighter stars. We have finalized the multichannel image profiling system and attempted three field tests.
NASA Astrophysics Data System (ADS)
Bantes, B.; Bayadilov, D.; Beck, R.; Becker, M.; Bella, A.; Bieling, J.; Böse, S.; Braglieri, A.; Brinkmann, K.; Burdeynyi, D.; Curciarello, F.; de Leo, V.; di Salvo, R.; Dutz, H.; Elsner, D.; Fantini, A.; Frese, T.; Friedrick, S.; Frommberger, F.; Ganenko, V.; Gervino, G.; Ghio, F.; Giardina, G.; Girolami, B.; Glazier, D.; Goertz, S.; Gridnev, A.; Gutz, E.; Hammann, D.; Hannappel, J.; Hillert, W.; Ignatov, A.; Jahn, O.; Jahn, R.; Joosten, R.; Jude, T. C.; Klein, F.; Koop, K.; Krusche, B.; Lapik, A.; Levi Sandri, P.; Lopatin, I.; Mandaglio, G.; Messi, F.; Messi, R.; Metag, V.; Moricciani, D.; Nanova, M.; Nedorezov, V.; Noviskiy, D.; Pedroni, P.; Romaniuk, M.; Rostomyan, T.; Schaerf, C.; Schmieden, H.; Sumachev, V.; Tarakonov, V.; Vegna, V.; Vlasov, P.; Walther, D.; Watts, D.; Zaunick, H.-G.; Zimmermann, T.
2014-01-01
Meson photoproduction is a key tool for the experimental investigation of the nucleon excitation spectrum. To disentangle the specific couplings of resonances, in addition to the rather well measured pion and eta photoproduction channels it is mandatory to obtain information on channels involving strange and vector mesons and higher mass pseudoscalar mesons, and the associated multi-particle final states with both charged and neutral particles. In this respect, the new BGO-OD experiment at the ELSA accelerator of the University of Bonn's Physikalisches Institut provides unique instrumentation. We describe the experiment, present its status and the initial program of measurements.
Study and design of cryogenic propellant acquisition systems. Volume 1: Design studies
NASA Technical Reports Server (NTRS)
Burge, G. W.; Blackmon, J. B.
1973-01-01
An in-depth study and selection of practical propellant surface tension acquisition system designs for two specific future cryogenic space vehicles, an advanced cryogenic space shuttle auxiliary propulsion system and an advanced space propulsion module is reported. A supporting laboratory scale experimental program was also conducted to provide design information critical to concept finalization and selection. Designs using localized pressure isolated surface tension screen devices were selected for each application and preliminary designs were generated. Based on these designs, large scale acquisition prototype hardware was designed and fabricated to be compatible with available NASA-MSFC feed system hardware.
Small Unix data acquisition system
NASA Astrophysics Data System (ADS)
Engberg, D.; Glanzman, T.
1994-02-01
A R&D program has been established to investigate the use of Unix in the various aspects of experimental computation. Earlier R&D work investigated the basic real-time aspects of the IBMRS/6000 workstation running AIX, which claims to be a real-time operating system. The next step in this R&D is the construction of prototype data acquisition system which attempts to exercise many of the features needed in the final on-line system in a realistic situation. For this project, we have combined efforts with a team studying the use of novel cell designs and gas mixtures in a new prototype drift chamber.
NASA Technical Reports Server (NTRS)
Bailey, F. R.; Kutler, Paul
1988-01-01
Discussed are the capabilities of NASA's Numerical Aerodynamic Simulation (NAS) Program and its application as an advanced supercomputing system for computational fluid dynamics (CFD) research. First, the paper describes the NAS computational system, called the NAS Processing System Network, and the advanced computational capabilities it offers as a consequence of carrying out the NAS pathfinder objective. Second, it presents examples of pioneering CFD research accomplished during NAS's first operational year. Examples are included which illustrate CFD applications for predicting fluid phenomena, complementing and supplementing experimentation, and aiding in design. Finally, pacing elements and future directions for CFD and NAS are discussed.
TTI (Texas Transportation Institute) track/dynamometer study. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Reineman, M.; Thompson, G.
1983-01-01
Seven passenger cars and one light truck were operated over the EPA urban and highway driving cycles to compare fuel economy measurements obtained on a test track with the fuel economy results obtained on a chassis dynamometer. The test program was designed to duplicate, as closely as possible, the track force loading (as determined by standard EPA road coastdown procedures) on the dynamometer. Experimental parameters which were investigated included loading differences between front- and rear-wheel drive vehicles, volumetric versus carbon balance fuel measurement techniques, coupled versus uncoupled roll dynamometer tests, and curved track versus straight track coastdowns.
Phase 0 study for a geothermal superheated water proof of concept facility
NASA Technical Reports Server (NTRS)
Douglass, R. H.; Pearson, R. O.
1974-01-01
A Phase 0 study for the selection of a representative liquid-dominated geothermal resource of moderate salinity and temperature is discussed. Selection and conceptual design of a nominal 10-MWe energy conversion system, and implementation planning for Phase 1: subsystem (component, experiments) and Phase 2: final design, construction, and operation of experimental research facilities are reported. The objective of the overall program is to demonstrate the technical and economic viability of utilizing moderate temperature and salinity liquid-dominated resources with acceptable environmental impact, and thus encourage commercial scale development of geothermal electrical power generation.
This final rule establishes consolidated permit program requirements governing the Hazardous Waste Management program under the Resource Conservation and Recovery Act (RCRA) and other related programs.
Silva, Luciana C; Teixeira, Maria C T V; Ribeiro, Edith L; Paula, Cristiane S
2017-12-18
To develop, implement, and verify the impact of a training program for health care providers working with children with autism spectrum disorder (ASD) in psychosocial care centers for children and adolescents (Centro de Atenção Psicossocial à Infância e à Adolescência - CAPSi) in São Paulo, Brazil. This quasi-experimental study was conducted with 14 professionals from four CAPSi units. The training program consisted of six phases: 1) pre-intervention observation; 2) meeting with staff to assess the main needs of the training program; 3) developing materials for training and evaluation; 4) meetings to discuss program implementation; 5) a final meeting for case discussion and evaluation; and 6) distance supervision. Three measures were used to evaluate the training program: i) the Knowledge, Attitudes, and Practices (KAP) questionnaire; ii) videos containing questions designed to assess program comprehension; and iii) a satisfaction survey. Thirteen videos were produced to as visual aids for use during the training program, and a further 26 videos were developed to evaluate it. The program was well evaluated by the participants. The video responses and KAP questionnaire scores suggest that staff knowledge and attitudes improved after training. The positive findings of this study suggest that the tested training program is feasible for use with multidisciplinary teams working in the CAPSi environment.
An Investigation of the Outward Bound Final Expedition
ERIC Educational Resources Information Center
Bobilya, Andrew J.; Kalisch, Ken; Daniel, Brad
2011-01-01
Research of wilderness programs indicates a clear need for additional investigation of specific program components and their influence on participant outcomes. This study examines one component of the Outward Bound wilderness program--the Final Expedition. The Final Expedition is a student-led wilderness expedition and is also referred to as an…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-11-25
... Department of Environmental Protection, (WVDEP), Division of Water and Waste Management, 601 57th Street SE...] West Virginia: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY... for final authorization of revisions to its hazardous waste program under the Resource Conservation...
Final environmental statement, Liquid Metal Fast Breeder Reactor Program. Volume 1
DOE Office of Scientific and Technical Information (OSTI.GOV)
None
1975-12-01
Information is presented under the following section headings: LMFBR program options and their compatibility with the major issues affecting commercial development, Proposed Final Environmental Statement for the LMFBR program, December 1974, WASH-1535, supplemental material, and material relating to Proposed Final Environmental Statement review. (DG)
The NASA/National Space Science Data Center trapped radiation environment model program, 1964 - 1991
NASA Technical Reports Server (NTRS)
Vette, James I.
1991-01-01
The major effort that NASA, initially with the help of the United States Air Force (USAF), carried out for 27 years to synthesize the experimental and theoretical results of space research related to energetic charged particles into a quantitative description of the terrestrial trapped radiation environment in the form of model environments is detailed. The effort is called the Trapped Radiation Environment Modeling Program (TREMP). In chapter 2 the historical background leading to the establishment of this program is given. Also, the purpose of this modeling program as established by the founders of the program is discussed. This is followed in chapter 3 by the philosophy and approach that was applied in this program throughout its lifetime. As will be seen, this philosophy led to the continuation of the program long after it would have expired. The highlights of the accomplishments are presented in chapter 4. A view to future possible efforts in this arena is given in chapter 5, mainly to pass on to future workers the differences that are perceived from these many years of experience. Chapter 6 is an appendix that details the chronology of the development of TREMP. Finally, the references, which document the work accomplished over these years, are presented in chapter 7.
Correlation Energies from the Two-Component Random Phase Approximation.
Kühn, Michael
2014-02-11
The correlation energy within the two-component random phase approximation accounting for spin-orbit effects is derived. The resulting plasmon equation is rewritten-analogously to the scalar relativistic case-in terms of the trace of two Hermitian matrices for (Kramers-restricted) closed-shell systems and then represented as an integral over imaginary frequency using the resolution of the identity approximation. The final expression is implemented in the TURBOMOLE program suite. The code is applied to the computation of equilibrium distances and vibrational frequencies of heavy diatomic molecules. The efficiency is demonstrated by calculation of the relative energies of the Oh-, D4h-, and C5v-symmetric isomers of Pb6. Results within the random phase approximation are obtained based on two-component Kohn-Sham reference-state calculations, using effective-core potentials. These values are finally compared to other two-component and scalar relativistic methods, as well as experimental data.
NASA Technical Reports Server (NTRS)
Davidian, Kenneth J.; Dieck, Ronald H.; Chuang, Isaac
1987-01-01
A preliminary uncertainty analysis was performed for the High Area Ratio Rocket Nozzle test program which took place at the altitude test capsule of the Rocket Engine Test Facility at the NASA Lewis Research Center. Results from the study establish the uncertainty of measured and calculated parameters required for the calculation of rocket engine specific impulse. A generalized description of the uncertainty methodology used is provided. Specific equations and a detailed description of the analysis is presented. Verification of the uncertainty analysis model was performed by comparison with results from the experimental program's data reduction code. Final results include an uncertainty for specific impulse of 1.30 percent. The largest contributors to this uncertainty were calibration errors from the test capsule pressure and thrust measurement devices.
NASA Technical Reports Server (NTRS)
Symons, Pat
1991-01-01
The topics presented are covered in viewgraph form. The concluded remarks are: (1) advanced cryogenic fluid systems technology is enhancing or enabling to all known transportation scenarios for space exploration; (2) an integrated/coordinated program involving LeRC/MSFC has been formulated to address all known CFM needs - new needs should they develop, can be accommodated within available skills/facilities; (3) all required/experienced personnel and facilities are finally in place - data from initial ground-based experiments is being collected and analyzed - small scale STS experiments are nearing flight - program is beginning to yield significant results; (4) future proposed funding to primarily come from two sources; and (5) cryogenic fluid experimentation is essential to provide required technology and assure implementation in future NASA missions.
NASA Technical Reports Server (NTRS)
Davidian, Kenneth J.; Dieck, Ronald H.; Chuang, Isaac
1987-01-01
A preliminary uncertainty analysis has been performed for the High Area Ratio Rocket Nozzle test program which took place at the altitude test capsule of the Rocket Engine Test Facility at the NASA Lewis Research Center. Results from the study establish the uncertainty of measured and calculated parameters required for the calculation of rocket engine specific impulse. A generalized description of the uncertainty methodology used is provided. Specific equations and a detailed description of the analysis are presented. Verification of the uncertainty analysis model was performed by comparison with results from the experimental program's data reduction code. Final results include an uncertainty for specific impulse of 1.30 percent. The largest contributors to this uncertainty were calibration errors from the test capsule pressure and thrust measurement devices.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Knebel, J.U.; Kuhn, D.; Mueller, U.
1997-12-01
This article presents the basic physical phenomena and scaling criteria of passive decay heat removal from a large coolant pool by single-phase and two-phase natural circulation. The physical significance of the dimensionless similarity groups derived is evaluated. The above results are applied to the SUCO program that is performed at the Forschungszentrum Karlsruhe. The SUCO program is a three-step series of scaled model experiments investigating the possibility of a sump cooling concept for future light water reactors. The sump cooling concept is based on passive safety features within the containment. The work is supported by the German utilities and themore » Siemens AG. The article gives results of temperature and velocity measurements in the 1:20 linearly scaled SUCOS-2D test facility. The experiments are backed up by numerical calculations using the commercial software package Fluent. Finally, using the similarity analysis from above, the experimental results of the model geometry are scaled-up to the conditions in the prototype, allowing a first statement with regard to the feasibility of the sump cooling concept. 11 refs., 9 figs., 3 tabs.« less
78 FR 25678 - Georgia: Final Authorization of State Hazardous Waste Management Program Revisions
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-02
...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... of changes to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA... Gwendolyn Gleaton, Permits and State Programs Section, RCRA Programs and Materials Management Branch, RCRA...
Hsiao, Ya-Chu; Chiang, Hui-Ying; Lee, Hsiang-Chun; Chen, Su-Hui
2012-12-01
Numerous studies have indicated an association between spirituality and health outcomes. However, little information is available about interventions that have been shown to enhance spiritual health and decrease stress. This study examined the effects of a spiritual learning program (SLP) on nursing student-perceived spiritual health and clinical practice stress. A convenience sample of nursing students currently enrolled at a nursing school in northern Taiwan were recruited to participate in this quasiexperimental study as participants to experimental and control groups via simple random sampling. Results from a spiritual health scale and a perceived clinical practice stress scale, together with the score for clinical nursing practice, were compared between the groups. Baseline data were collected from all participants. The experimental group participated in 8 weeks of 50-minute per week SLP, which included lectures, discussion, reflection, and spiritual practices. A second data set was collected from all participants after the intervention. A third data set was collected after all participants had performed 4 weeks of nursing clinical practice. Participants were all women. Average age was 19.4 years (SD = 1.3 years). Generalized estimating equation analysis showed SLP to have a significant short-term effect on improving the total score for spiritual health (p < .01). Significantly greater improvement in clinical practice stress scores was also seen in the experimental group as compared with the control group (all p < .05). The experimental group obtained a higher score of the final clinical practice than the control group (t = 3.771, p < .001). The SLP may encourage participants to see stressors as meaningful events that are connected to individual life purposes. The program developed in this study may be used to improve spiritual health and reduce stress in nursing students' clinical practice. This SLP may be referenced when designing similar spirituality-related courses and applied to nursing student counseling.
ERIC Educational Resources Information Center
National Archives and Records Administration, 2006
2006-01-01
The Secretary is adopting as final, with changes, interim final regulations in: 34 CFR part 691 for the Academic Competitiveness Grant (ACG) and National Science and Mathematics Access to Retain Talent Grant (National SMART Grant) programs; 34 CFR part 668 (Student Assistance General Provisions); and 34 CFR part 690 (Federal Pell Grant Program).…
NASA Technical Reports Server (NTRS)
Koch, L. Danielle
1998-01-01
Reported here is a design study of a propeller for a vehicle capable of subsonic flight in Earth's stratosphere. All propellers presented were required to absorb 63.4 kW (85 hp) at 25.9 km (85,000 ft) while aircraft cruise velocity was maintained at Mach 0.40. To produce the final design, classic momentum and blade-element theories were combined with two and three-dimensional results from the Advanced Ducted Propfan Analysis Code (ADPAC), a numerical Navier-Stokes analysis code. The Eppler 387 airfoil was used for each of the constant section propeller designs compared. Experimental data from the Langley Low-Turbulence Pressure Tunnel was used in the strip theory design and analysis programs written. The experimental data was also used to validate ADPAC at a Reynolds numbers of 60,000 and a Mach number of 0.20. Experimental and calculated surface pressure coefficients are compared for a range of angles of attack. Since low Reynolds number transonic experimental data was unavailable, ADPAC was used to generate two-dimensional section performance predictions for Reynolds numbers of 60,000 and 100,000 and Mach numbers ranging from 0.45 to 0.75. Surface pressure coefficients are presented for selected angles of attack. in addition to the variation of lift and drag coefficients at each flow condition. A three-dimensional model of the final design was made which ADPAC used to calculated propeller performance. ADPAC performance predictions were compared with strip-theory calculations at design point. Propeller efficiency predicted by ADPAC was within 1.5% of that calculated by strip theory methods, although ADPAC predictions of thrust, power, and torque coefficients were approximately 5% lower than the strip theory results. Simplifying assumptions made in the strip theory account for the differences seen.
7 CFR 1493.250 - Final application and issuance of a facility payment guarantee.
Code of Federal Regulations, 2014 CFR
2014-01-01
...) COMMODITY CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE EXPORT PROGRAMS CCC EXPORT CREDIT GUARANTEE PROGRAMS CCC Facility Guarantee Program (FGP) Operations § 1493.250 Final application and issuance of a... commitment may, within six months of the date of such letter, submit a final application to CCC for a...
7 CFR 1493.250 - Final application and issuance of a facility payment guarantee.
Code of Federal Regulations, 2013 CFR
2013-01-01
...) COMMODITY CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE EXPORT PROGRAMS CCC EXPORT CREDIT GUARANTEE PROGRAMS CCC Facility Guarantee Program (FGP) Operations § 1493.250 Final application and issuance of a... commitment may, within six months of the date of such letter, submit a final application to CCC for a...
7 CFR 1493.250 - Final application and issuance of a facility payment guarantee.
Code of Federal Regulations, 2012 CFR
2012-01-01
...) COMMODITY CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE EXPORT PROGRAMS CCC EXPORT CREDIT GUARANTEE PROGRAMS CCC Facility Guarantee Program (FGP) Operations § 1493.250 Final application and issuance of a... commitment may, within six months of the date of such letter, submit a final application to CCC for a...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-09-21
... Activities; Proposed Collection; Comment Request; Final Authorization for Hazardous Waste Management Programs... Request (ICR) concerning final authorization for State Hazardous Waste Management Programs. This ICR is... potentially affected by this action are States. Title: Final Authorization for Hazardous Waste Management...
76 FR 6594 - Florida: Final Authorization of State Hazardous Waste Management Program Revisions
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-07
...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... of the changes to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA... and State Programs Section, RCRA Programs and Materials Management Branch, RCRA Division, U.S...
77 FR 60963 - Tennessee: Final Authorization of State Hazardous Waste Management Program Revisions
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-05
...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... of the changes to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA... Johnson, Permits and State Programs Section, RCRA Programs and Materials Management Branch, RCRA Division...
MEKS: A program for computation of inclusive jet cross sections at hadron colliders
NASA Astrophysics Data System (ADS)
Gao, Jun; Liang, Zhihua; Soper, Davison E.; Lai, Hung-Liang; Nadolsky, Pavel M.; Yuan, C.-P.
2013-06-01
EKS is a numerical program that predicts differential cross sections for production of single-inclusive hadronic jets and jet pairs at next-to-leading order (NLO) accuracy in a perturbative QCD calculation. We describe MEKS 1.0, an upgraded EKS program with increased numerical precision, suitable for comparisons to the latest experimental data from the Large Hadron Collider and Tevatron. The program integrates the regularized patron-level matrix elements over the kinematical phase space for production of two and three partons using the VEGAS algorithm. It stores the generated weighted events in finely binned two-dimensional histograms for fast offline analysis. A user interface allows one to customize computation of inclusive jet observables. Results of a benchmark comparison of the MEKS program and the commonly used FastNLO program are also documented. Program SummaryProgram title: MEKS 1.0 Catalogue identifier: AEOX_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOX_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland. Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 9234 No. of bytes in distributed program, including test data, etc.: 51997 Distribution format: tar.gz Programming language: Fortran (main program), C (CUBA library and analysis program). Computer: All. Operating system: Any UNIX-like system. RAM: ˜300 MB Classification: 11.1. External routines: LHAPDF (https://lhapdf.hepforge.org/) Nature of problem: Computation of differential cross sections for inclusive production of single hadronic jets and jet pairs at next-to-leading order accuracy in perturbative quantum chromodynamics. Solution method: Upon subtraction of infrared singularities, the hard-scattering matrix elements are integrated over available phase space using an optimized VEGAS algorithm. Weighted events are generated and filled into a finely binned two-dimensional histogram, from which the final cross sections with typical experimental binning and cuts are computed by an independent analysis program. Monte Carlo sampling of event weights is tuned automatically to get better efficiency. Running time: Depends on details of the calculation and sought numerical accuracy. See benchmark performance in Section 4. The tests provided take approximately 27 min for the jetbin run and a few seconds for jetana.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Seapan, M.; Crynes, B.L.; Dale, S.
The objectives of this study were to analyze alternate crudes kinetic hydrotreatment data in the literature, develop a mathematical model for interpretation of these data, develop an experimental procedure and apparatus to collect accurate kinetic data, and finally, to combine the model and experimental data to develop a general model which, with a few experimental parameters, could be used in design of future hydrotreatment processes. These objectives were to cover a four year program (1980 to 1984) and were subjective to sufficient funding. Only partial funding has been available thus far to cover activities for two years. A hydrotreatment datamore » base is developed which contains over 2000 citations, stored in a microcomputer. About 50% of these are reviewed, classified and can be identified by feedstock, catalyst, reactor type and other process characteristics. Tests of published hydrodesulfurization data indicate the problems with simple n-th order, global kinetic models, and point to the value of developing intrinsic reaction kinetic models to describe the reaction processes. A Langmuir-Hinshelwood kinetic model coupled with a plug flow reactor design equation has been developed and used for published data evaluation. An experimental system and procedure have been designed and constructed, which can be used for kinetic studies. 30 references, 4 tables.« less
Incentives for nondiscriminatory wellness programs in group health plans. Final rule.
2013-06-03
This document contains final regulations, consistent with the Affordable Care Act, regarding nondiscriminatory wellness programs in group health coverage. Specifically, these final regulations increase the maximum permissible reward under a health-contingent wellness program offered in connection with a group health plan (and any related health insurance coverage) from 20 percent to 30 percent of the cost of coverage. The final regulations further increase the maximum permissible reward to 50 percent for wellness programs designed to prevent or reduce tobacco use. These regulations also include other clarifications regarding the reasonable design of health-contingent wellness programs and the reasonable alternatives they must offer in order to avoid prohibited discrimination.
The Texas A&M Radioisotope Production and Radiochemistry Program
DOE Office of Scientific and Technical Information (OSTI.GOV)
Akabani, Gamal
The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostic and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoreticalmore » projects and two experimental target systems. These were for At-211 production and for Zn- 62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using (a) a subcritical aqueous target system and (b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011; due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.« less
The Texas A&M Radioisotope Production and Radiochemistry Program
DOE Office of Scientific and Technical Information (OSTI.GOV)
Akabani, Gamal
The main motivation of the project at Texas A&M University was to carry out the production of critically needed radioisotopes used in medicine for diagnostics and therapy, and to establish an academic program in radionuclide production and separation methods. After a lengthy battle with the Texas A&M University Radiation Safety Office, the Texas Department of State Health Services granted us a license for the production of radionuclides in July 2015, allowing us to work in earnest in our project objectives. Experiments began immediately after licensing, and we started the assembly and testing of our target systems. There were four analytical/theoreticalmore » projects and two experimental target systems. These were for At-211 production and for Zn-62/Cu-62 production. The theoretical projects were related to the production of Mo-99/Tc-99m using a) a subcritical aqueous target system and b) production of Tc-99m from accelerator-generated Mo-99 utilizing a photon-neutron interaction with enriched Mo-100 targets. The two experimental projects were the development of targetry systems and production of At-211 and Zn-62/Cu-62 generator. The targetry system for At-211 has been tested and production of At-211 is chronic depending of availability of beam time at the cyclotron. The installation and testing of the targetry system for the production of Zn-62/Cu-62 has not been finalized. A description of the systems is described. The academic program in radionuclide production and separation methods was initiated in the fall of 2011 and, due to the lack of a radiochemistry laboratory, it was suspended. We expect to re-start the academic program at the Texas A&M Institute for Preclinical Studies under the Molecular Imaging Program.« less
The design of a commercial space infrastructure
NASA Technical Reports Server (NTRS)
1989-01-01
Space Services and Logistics, Inc. represents the complete engineering design of a technically and financially viable commercial space company. The final proposal offers an economically sound program of space vehicles and systems designed to substantially affect a variety of space markets and produce a vertically integrated structure within the next 20 years. Throughout this design process, particular stress has been placed on attaining the highest possible levels of safety and reliability. The final program financial design requires a considerable initial outlay, but promises a relatively quick return on invested capital, culminating in large annual profits by the end of the 20-year scope of the cost outlook. The overall design has been extensively researched and was primarily driven by the present and near-term projected market demands for services uniquely or competitively offered only by space-oriented operations. Heretofore, available capabilities, rather than these market demands, have determined the degree and type of commercial market access. Removing this limitation through extensive use of modularity and reconfigurability allows the company to gear itself to the market, while still remaining extremely competitive with existing systems. The markets identified as lucrative, and that have governed much of the design requirements, are: low-cost launch services to LEO over a wide range of payload masses and inclinations; upper stage payload delivery from LEO to GEO; manned space operations and human transport to and from orbit; EVA assembly and maintenance of large space structures; satellite servicing and repair by both humans and telerobotic operations; a line of customized satellites designed for extended life and capable of reconfiguration or technology upgrade on orbit; small-scale microgravity experimentation and manufacturing supported by spacecraft retrieval capabilities for experimental specimens and manufactured goods; and a full-range of payload integration, testing, design, and support services before launch and once in orbit.
Consensus Prediction of Charged Single Alpha-Helices with CSAHserver.
Dudola, Dániel; Tóth, Gábor; Nyitray, László; Gáspári, Zoltán
2017-01-01
Charged single alpha-helices (CSAHs) constitute a rare structural motif. CSAH is characterized by a high density of regularly alternating residues with positively and negatively charged side chains. Such segments exhibit unique structural properties; however, there are only a handful of proteins where its existence is experimentally verified. Therefore, establishing a pipeline that is capable of predicting the presence of CSAH segments with a low false positive rate is of considerable importance. Here we describe a consensus-based approach that relies on two conceptually different CSAH detection methods and a final filter based on the estimated helix-forming capabilities of the segments. This pipeline was shown to be capable of identifying previously uncharacterized CSAH segments that could be verified experimentally. The method is available as a web server at http://csahserver.itk.ppke.hu and also a downloadable standalone program suitable to scan larger sequence collections.
White, Harold B.; Benore, Marilee A.; Sumter, Takita F.; Caldwell, Benjamin D.; Bell, Ellis
2014-01-01
Biochemistry and molecular biology (BMB) students should demonstrate proficiency in the foundational concepts of the discipline and possess the skills needed to practice as professionals. To ascertain the skills that should be required, groups of BMB educators met in several focused workshops to discuss the expectations with the ultimate goal of clearly articulating the skills required. The results of these discussions highlight the critical importance of experimental, mathematical, and interpersonal skills including collaboration, teamwork, safety, and ethics. The groups also found experimental design, data interpretation and analysiand the ability to communicate findings to diverse audience to be essential skills. To aid in the development of appropriate assessments these skills are grouped into three categories, 1) Process of Science, 2) Communication and Comprehension of Science, and 3) Community of Practice Aspects of Science. Finally, the groups worked to align these competencies with the best practices in both teaching and in skills assessment. PMID:24019246
Deformation Response and Life of Metallic Composites
NASA Technical Reports Server (NTRS)
Lissenden, Cliff J.
2005-01-01
The project was initially funded for one year (for $100,764) to investigate the potential of particulate reinforced metals for aeropropulsion applications and to generate fatigue results that quantify the mean stress effect for a titanium alloy matrix material (TIMETAL 21S). The project was continued for a second year (for $85,000) to more closely investigate cyclic deformation, especially ratcheting, of the titanium alloy matrix at elevated temperature. Equipment was purchased (for $19,000) to make the experimental program feasible; this equipment included an extensometer calibrator and a multi-channel signal conditioning amplifier. The project was continued for a third year ($50,000) to conduct cyclic relaxation experiments aimed at validating the elastic-viscoelastic-viscoplastic model that NASA GRC had developed for the titanium alloy. Finally, a one-year no cost extension was granted to enable continued analysis of the experimental results and model comparisons.
NASA Technical Reports Server (NTRS)
Siegel, W. H.
1978-01-01
As part of NASA's continuing research into hypersonics and 85 square foot hypersonic wing test section of a proposed hypersonic research airplane was laboratory tested. The project reported on in this paper has carried the hypersonic wing test structure project one step further by testing a single beaded panel to failure. The primary interest was focused upon the buckling characteristics of the panel under pure compression with boundary conditions similar to those found in a wing mounted condition. Three primary phases of analysis are included in the report. These phases include: experimental testing of the beaded panel to failure; finite element structural analysis of the beaded panel with the computer program NASTRAN; a summary of the semiclassical buckling equations for the beaded panel under purely compressive loads. Comparisons between each of the analysis methods are also included.
DFT, FT-IR, FT-Raman and vibrational studies of 3-methoxyphenyl boronic acid
NASA Astrophysics Data System (ADS)
Patil, N. R.; Hiremath, Sudhir M.; Hiremath, C. S.
2018-05-01
The aim of this work is to study the possible stable, geometrical molecular structure, experimental and theoretical FT-IR and FT-Raman spectroscopic methods of 3-Methoxyphenyl boronic acid (3MPBA). FT-IR and FT-Raman spectra were recorded in the region of 4000-400 cm-1 and 40000-50 cm-1 respectively. The optimized geometric structure and vibrational wavenumbers of the title compound were searched by B3LYP hybrid density functional theory method with 6-311++G (d, p) basis set. The Selectedexperimentalbandswereassignedandcharacterizedonthebasisofthescaledtheoreticalwavenumbersby their potential energy distribution (PED) of the vibrational modes obtained from VEDA 4 program. Finally, the predicted calculation results were applied to simulated FT-IR and FT-Raman spectra of the title compound, which show agreement with the observed spectra. Whereas, it is observed that, the theoretical frequencies are more than the experimental one for O-H stretching vibration modes of the title molecule.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Graham, C.D.; Kulkarni, S.; Louis, E.
1976-05-01
Results of a program to study process routes leading to a low cost large area integrated silicon solar array manufacture for terrestrial applications are reported. Potential processes for the production of solar-grade silicon are evaluated from thermodynamic, economic, and technical feasibility points of view. Upgrading of the present arc-furnace process is found most favorable. Experimental studies of the Si/SiF/sub 4/ transport and purification process show considerable impurity removal and reasonable transport rates. Silicon deformation experiments indicate production of silicon sheet by rolling at 1350/sup 0/C is feasible. Significant recrystallization by strain-anneal technique has been observed. Experimental recrystallization studies using anmore » electron beam line source are discussed. A maximum recrystallization velocity of approximately 9 m/hr is calculated for silicon sheet. A comparative process rating technique based on detailed cost analysis is presented.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Potter, R.A.
1981-09-01
Eighteen heat-up tests were run on nine standard and experimental dual component monolithic refractory concrete linings. These tests were run with a five foot diameter by 14-ft high Pressure Vessel/Test Furnace designed to accommodate a 12-inch thick by 5-ft high refractory lining, heat the hot face to 2000/sup 0/F and expose the lining to air or steam pressures up to 150 psig. Results obtained from standard type linings in the test facility indicated that lining degradation duplicated that observed in field installations. The lining performance was significantly improved due to information gained from a systematic study of the cracking thatmore » occurred in the linings; the analysis of the lining strains, shell stresses and acoustic emission results; and the stress analyses performed on the standard and experimental lining designs with the finite element analysis computer programs, REFSAM and RESGAP.« less
Theory and Experimental Program for p-B11 Fusion with the Dense Plasma Focus
NASA Astrophysics Data System (ADS)
Lerner, Eric J.; Krupakar Murali, S.; Haboub, A.
2011-10-01
Lawrenceville Plasma Physics Inc. has initiated a 2-year-long experimental project to test the scientific feasibility of achieving controlled fusion using the dense plasma focus (DPF) device with hydrogen-boron (p-B11) fuel. The goals of the experiment are: first, to confirm the achievement of high ion and electron energies observed in previous experiments from 2001; second, to greatly increase the efficiency of energy transfer into the plasmoid where the fusion reactions take place; third, to achieve the high magnetic fields (>1 GG) needed for the quantum magnetic field effect, which will reduce cooling of the plasma by X-ray emission; and finally, to use p-B11 fuel to demonstrate net energy gain. The experiments are being conducted with a newly constructed dense plasma focus in Middlesex, NJ which is expected to generate peak currents in excess of 2 MA. Some preliminary results are reported.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bilello, J C; Liu, J M
Progress in an investigation of the application of microdynamics and lattice mechanics to the problems in plastic flow and fracture is described. The research program consisted of both theoretical formulations and experimental measurements of a number of intrinsic material parameters in bcc metals and alloys including surface energy, phonon-dispersion curves for dislocated solids, dislocation-point defect interaction energy, slip initiation and microplastic flow behavior. The study has resulted in an improved understanding in the relationship among the experimentally determined fracture surface energy, the intrinsic cohesive energy between atomic planes, and the plastic deformation associated with the initial stages of crack propagation.more » The values of intrinsic surface energy of tungsten, molybdenum, niobium and niobium-molybdenum alloys, deduced from the measurements, serve as a starting point from which fracture toughness of these materials in engineering service may be intelligently discussed.« less
2016-08-05
This final rule updates the payment rates used under the prospective payment system (PPS) for skilled nursing facilities (SNFs) for fiscal year (FY) 2017. In addition, it specifies a potentially preventable readmission measure for the Skilled Nursing Facility Value-Based Purchasing Program (SNF VBP), and implements requirements for that program, including performance standards, a scoring methodology, and a review and correction process for performance information to be made public, aimed at implementing value-based purchasing for SNFs. Additionally, this final rule includes additional polices and measures in the Skilled Nursing Facility Quality Reporting Program (SNF QRP). This final rule also responds to comments on the SNF Payment Models Research (PMR) project.
ERIC Educational Resources Information Center
Bricker, Diane; Squires, Jane
This final report discusses the activities and outcomes of the early intervention interdisciplinary preservice program at the University of Oregon. This master's degree program used both "measurement of" and "reflection about" preservice efforts to address important questions regarding program effectiveness and identify…
34 CFR 387.1 - What is the Experimental and Innovative Training Program?
Code of Federal Regulations, 2010 CFR
2010-07-01
... 34 Education 2 2010-07-01 2010-07-01 false What is the Experimental and Innovative Training... (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EXPERIMENTAL AND INNOVATIVE TRAINING General § 387.1 What is the Experimental and Innovative Training Program? This program is...
34 CFR 387.1 - What is the Experimental and Innovative Training Program?
Code of Federal Regulations, 2012 CFR
2012-07-01
... 34 Education 2 2012-07-01 2012-07-01 false What is the Experimental and Innovative Training... (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EXPERIMENTAL AND INNOVATIVE TRAINING General § 387.1 What is the Experimental and Innovative Training Program? This program is...
34 CFR 387.1 - What is the Experimental and Innovative Training Program?
Code of Federal Regulations, 2013 CFR
2013-07-01
... 34 Education 2 2013-07-01 2013-07-01 false What is the Experimental and Innovative Training... (Continued) OFFICE OF SPECIAL EDUCATION AND REHABILITATIVE SERVICES, DEPARTMENT OF EDUCATION EXPERIMENTAL AND INNOVATIVE TRAINING General § 387.1 What is the Experimental and Innovative Training Program? This program is...
1994-12-01
Research Program Phillips Laboratory Kirtland Air Force Base Albuquerque, New Mexico Sponsored by: Air ...Summer Research Program Phillips Laboratory Sponsored by. Air Force Office of Scientific Research Kirtland Air Force Base, Albuquerque, New Mexico...UNITED STATES AIR FORCE SUMMER RESEARCH PROGRAM -- 1993 SUMMER RESEARCH PROGRAM FINAL REPORTS VOLUME 8
Inertial Confinement Fusion Annual Report 1999
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kauffman, Robert L.
The ICF Program has undergone a significant change in 1999 with the decommissioning of the Nova laser and the transfer of much of the experimental program to the OMEGA laser at the University of Rochester. The Nova laser ended operations with the final experiment conducted on May 27, 1999. This marked the end to one of DOE's most successful experimental facilities. Since its commissioning in 1985, Nova performed 13,424 experiments supporting ICF, Defense Sciences, high-power laser research, and basic science research. At the time of its commissioning, Nova was the world's most powerful laser. Its early experiments demonstrated that 3ωmore » light could produce high-drive, low-preheat environment required for indirect-drive ICE. In the early 1990s, the technical program on Nova for indirect drive ignition was defined by the Nova technical contract established by National Academy Review of ICF in 1990. Successful completion of this research program contributed significantly to the recommendation by the ICF Advisory Committee in 1995 to proceed with the construction of the National Ignition Facility? Nova experiments also demonstrated the utility of high-powered lasers for studying the physics of interest to Defense Sciences. Now, high-powered lasers along with pulsed-power machines are the principal facilities for studying high energy density science in DOE's Stockpile Stewardship Program (SSP). In 1997, one beam of Nova was converted to a short pulsed beam producing a petawatt of power in subpicosecond pulses. The petawatt beam was used for pioneering research in short-pulse laser-matter interactions relevant to fast ignitor ICF and short pulsed x-ray, electron, and particle production for use as probes. Nova is being disassembled and the space is being used to support NIF construction. Nova components are being distributed to a number of other laser laboratories around the world for reuse as determined by DOE. This report summarizes the research performed by the ICF Program in FY1999. The report is divided into five sections corresponding to the major areas of program activities. These are sections on (1) ignition target physics experiments theory and modeling, (2) high energy density experimental science, (3) target development, fabrication, and handling, (4) NIF laser development, and (5) optics technology development.« less
2016-07-29
This rule adopts as final, with some modifications, the National School Lunch Program and School Breakfast Program regulations set forth in the interim final rule published in the Federal Register on June 28, 2013. The requirements addressed in this rule conform to the provisions in the Healthy, Hunger-Free Kids Act of 2010 regarding nutrition standards for all foods sold in schools, other than food sold under the lunch and breakfast programs. Most provisions of this final rule were implemented on July 1, 2014, a full year subsequent to publication of the interim final rule. This was in compliance with section 208 of the Healthy, Hunger-Free Kids Act of 2010, which required that State and local educational agencies have at least one full school year from the date of publication of the interim final rule to implement the competitive food provisions. Based on comments received on the interim final rule and implementation experience, this final rule makes a few modifications to the nutrition standards for all foods sold in schools implemented on July 1, 2014. In addition, this final rule codifies specific policy guidance issued after publication of the interim rule. Finally, this rule retains the provision related to the standard for total fat as interim and requests further comment on this single standard.
76 FR 64085 - Post-2014 Resource Pool-Loveland Area Projects, Final Power Allocation
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-17
... power allocation. SUMMARY: The Western Area Power Administration (Western), a Federal power marketing..., Final Power Allocation developed under the requirements of subpart C-Power Marketing Initiative of the Energy Planning and Management Program (Program) Final Rule, 10 CFR part 905. These final power...
2016-08-24
08-24-2016 2. REPORT TYPE Final 3. DATES COVERED (From - To) July 2011 - May 2016 4. TITLE AND SUBTITLE Experimental Confirmation of an Aquatic...Unlimited) or SAR (Same as Report). An entry in this block is necessary if the abstract is to be limited. 1 FINAL REPORT Title: Experimental ...expounds on: the robot’s propulsive wake is being investigated in order to determine whether the theoretical hydrodynamics compare to the experimentally
2018-02-15
models and approaches are also valid using other invasive and non - invasive technologies. Finally, we illustrate and experimentally evaluate this...2017 Project Outline q Pattern formation diversity in wild microbial societies q Experimental and mathematical analysis methodology q Skeleton...chemotaxis, nutrient degradation, and the exchange of amino acids between cells. Using both quantitative experimental methods and several theoretical
Recent Results of NASA's Space Environments and Effects Program
NASA Technical Reports Server (NTRS)
Minor, Jody L.; Brewer, Dana S.
1998-01-01
The Space Environments and Effects (SEE) Program is a multi-center multi-agency program managed by the NASA Marshall Space Flight Center. The program evolved from the Long Duration Exposure Facility (LDEF), analysis of LDEF data, and recognition of the importance of the environments and environmental effects on future space missions. It is a very comprehensive and focused approach to understanding the space environments, to define the best techniques for both flight and ground-based experimentation, to update the models which predict both the environments and the environmental effects on spacecraft, and finally to ensure that this information is properly maintained and inserted into spacecraft design programs. Formal funding of the SEE Program began initially in FY95. A NASA Research Announcement (NRA) solicited research proposals in the following categories: 1) Engineering environment definitions; 2) Environments and effects design guidelines; 3) Environments and effects assessment models and databases; and, 4) Flight/ground simulation/technology assessment data. This solicitation resulted in funding for eighteen technology development activities (TDA's). This paper will present and describe technical results rom the first set of TDA's of the SEE Program. It will also describe the second set of technology development activities which are expected to begin in January 1998. These new technology development activities will enable the SEE Program to start numerous new development activities in support of mission customer needs.
NASA Technical Reports Server (NTRS)
Sutter, Thomas R.; Wu, K. Chauncey; Riutort, Kevin T.; Laufer, Joseph B.; Phelps, James E.
1992-01-01
A first-generation space crane articulated-truss joint was statically and dynamically characterized in a configuration that approximated an operational environment. The articulated-truss joint was integrated into a test-bed for structural characterization. Static characterization was performed by applying known loads and measuring the corresponding deflections to obtain load-deflection curves. Dynamic characterization was performed using modal testing to experimentally determine the first six mode shapes, frequencies, and modal damping values. Static and dynamic characteristics were also determined for a reference truss that served as a characterization baseline. Load-deflection curves and experimental frequency response functions are presented for the reference truss and the articulated-truss joint mounted in the test-bed. The static and dynamic experimental results are compared with analytical predictions obtained from finite element analyses. Load-deflection response is also presented for one of the linear actuators used in the articulated-truss joint. Finally, an assessment is presented for the predictability of the truss hardware used in the reference truss and articulated-truss joint based upon hardware stiffness properties that were previously obtained during the Precision Segmented Reflector (PSR) Technology Development Program.
NASA Astrophysics Data System (ADS)
Giardina, G.; Mandaglio, G.; Nasirov, A. K.; Anastasi, A.; Curciarello, F.; Fazio, G.
2018-05-01
The sensitivity of reaction mechanism in the formation of compound nucleus (CN) by the analysis of kinetic energy spectra of light particles and of reaction products are shown. The dependence of the P CN fusion probability of reactants and W sur survival probability of CN against fission at its deexcitation on the mass and charge symmetries in the entrance channel of heavy-ion collisions, as well as on the neutron numbers is discussed. The possibility of conducting a complex program of investigations of the complete fusion by reliable ways depends on the detailed and refined methods of experimental and theoretical analyses.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Srivastava, V.J.; Hill, A.H.
1993-06-01
The goal of the project was to determine the technical feasibility of utilizing a novel concept in anaerobic digestion, in-situ methane enrichment digestion or MED for producing utility-grade gas from a pilot-scale anaerobic digester. MED tests conducted during this program consistently achieved digester product gas with a methane (CH4) content of greater than 90% (on a dry-, nitrogen-free basis). The MED concept, because it requires relatively simple equipment and modest energy input, has the potential to simplify gas cleanup requirements and substantially reduce the cost of converting wastes and biomass to pipeline quality gas.
Author index to published ERTS-1 reports
Bidwell, Timothy C.; Mitchell, Cheryl A.
1975-01-01
This index has been compiled to assist the reader in locating and obtaining reports on the 334 scientific experiments conducted under the National Aeronautics and Space Administration (NASA) Earth Resources Technology Satellite-1 (ERTS-1) (renamed Landsat) program. Each NASA-designated experimenter was required to submit written reports on his investigation: these were designated type 1, type 2, and type 3 reports. Type 1 reports were periodic (monthly or bimonthly) progress summaries; type 2 were comprehensive scientific and technical reports; and type 3 were final report. Investigators were also encourage to present their more significant findings in professional or technical journals and proceedings of symposia.
Physics through the 1990s: Gravitation, cosmology and cosmic-ray physics
NASA Technical Reports Server (NTRS)
1986-01-01
The volume contains recommendations for space-and ground-based programs in gravitational physics, cosmology, and cosmic-ray physics. The section on gravitation examines current and planned experimental tests of general relativity; the theory behind, and search for, gravitational waves, including sensitive laser-interferometric tests and other observations; and advances in gravitation theory (for example, incorporating quantum effects). The section on cosmology deals with the big-bang model, the standard model from elementary-particle theory, the inflationary model of the Universe. Computational needs are presented for both gravitation and cosmology. Finally, cosmic-ray physics theory (nucleosynthesis, acceleration models, high-energy physics) and experiment (ground and spaceborne detectors) are discussed.
Life prediction and constitutive models for engine hot section anisotropic materials program
NASA Technical Reports Server (NTRS)
Nissley, D. M.; Meyer, T. G.; Walker, K. P.
1992-01-01
This report presents a summary of results from a 7 year program designed to develop generic constitutive and life prediction approaches and models for nickel-based single crystal gas turbine airfoils. The program was composed of a base program and an optional program. The base program addressed the high temperature coated single crystal regime above the airfoil root platform. The optional program investigated the low temperature uncoated single crystal regime below the airfoil root platform including the notched conditions of the airfoil attachment. Both base and option programs involved experimental and analytical efforts. Results from uniaxial constitutive and fatigue life experiments of coated and uncoated PWA 1480 single crystal material formed the basis for the analytical modeling effort. Four single crystal primary orientations were used in the experiments: group of zone axes (001), group of zone axes (011), group of zone axes (111), and group of zone axes (213). Specific secondary orientations were also selected for the notched experiments in the optional program. Constitutive models for an overlay coating and PWA 1480 single crystal materials were developed based on isothermal hysteresis loop data and verified using thermomechanical (TMF) hysteresis loop data. A fatigue life approach and life models were developed for TMF crack initiation of coated PWA 1480. A life model was developed for smooth and notched fatigue in the option program. Finally, computer software incorporating the overlay coating and PWA 1480 constitutive and life models was developed.
Paradox of vaccination: is vaccination really effective against avian flu epidemics?
Iwami, Shingo; Suzuki, Takafumi; Takeuchi, Yasuhiro
2009-01-01
Although vaccination can be a useful tool for control of avian influenza epidemics, it might engender emergence of a vaccine-resistant strain. Field and experimental studies show that some avian influenza strains acquire resistance ability against vaccination. We investigated, in the context of the emergence of a vaccine-resistant strain, whether a vaccination program can prevent the spread of infectious disease. We also investigated how losses from immunization by vaccination imposed by the resistant strain affect the spread of the disease. We designed and analyzed a deterministic compartment model illustrating transmission of vaccine-sensitive and vaccine-resistant strains during a vaccination program. We investigated how the loss of protection effectiveness impacts the program. Results show that a vaccination to prevent the spread of disease can instead spread the disease when the resistant strain is less virulent than the sensitive strain. If the loss is high, the program does not prevent the spread of the resistant strain despite a large prevalence rate of the program. The epidemic's final size can be larger than that before the vaccination program. We propose how to use poor vaccines, which have a large loss, to maximize program effects and describe various program risks, which can be estimated using available epidemiological data. We presented clear and simple concepts to elucidate vaccination program guidelines to avoid negative program effects. Using our theory, monitoring the virulence of the resistant strain and investigating the loss caused by the resistant strain better development of vaccination strategies is possible.
76 FR 43571 - Small Business HUBZone Program; Government Contracting Programs
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-21
... SMALL BUSINESS ADMINISTRATION 13 CFR Part 126 RIN 3245-AG45 Small Business HUBZone Program; Government Contracting Programs AGENCY: U.S. Small Business Administration. ACTION: Interim final rule with request for comments. SUMMARY: This interim final rule amends the U.S. Small Business Administration's...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-07
... Carolina: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... authorization of the changes to its hazardous waste program under the Resource Conservation and Recovery Act... Section, RCRA Programs and Materials Management Branch, RCRA Division, U.S. Environmental Protection...
77 FR 60919 - Tennessee: Final Authorization of State Hazardous Waste Management Program Revisions
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-05
...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental..., Division of Solid Waste Management, 5th Floor, L & C Tower, 401 Church Street, Nashville, Tennessee 37243... RCRA hazardous waste management program. We granted authorization for changes to Tennessee's program on...
Awareness Programs and Change in Taste-Based Caste Prejudice
Banerjee, Ritwik; Datta Gupta, Nabanita
2015-01-01
Becker's theory of taste-based discrimination predicts that relative employment of the discriminated social group will improve if there is a decrease in the level of prejudice for the marginally discriminating employer. In this paper we experimentally test this prediction offered by Garry Becker in his seminal work on taste based discrimination, in the context of caste in India, with management students (potential employers in the near future) as subjects. First, we measure caste prejudice and show that awareness through a TV social program reduces implicit prejudice against the lower caste and the reduction is sustained over time. Second, we find that the treatment reduces the prejudice levels of those in the left tail of the prejudice distribution - the group which can potentially affect real outcomes as predicted by the theory. And finally, a larger share of the treatment group subjects exhibit favorable opinion about reservation in jobs for the lower caste. PMID:25902290
El-Qulity, Said Ali; Mohamed, Ali Wagdy
2016-01-01
This paper proposes a nonlinear integer goal programming model (NIGPM) for solving the general problem of admission capacity planning in a country as a whole. The work aims to satisfy most of the required key objectives of a country related to the enrollment problem for higher education. The system general outlines are developed along with the solution methodology for application to the time horizon in a given plan. The up-to-date data for Saudi Arabia is used as a case study and a novel evolutionary algorithm based on modified differential evolution (DE) algorithm is used to solve the complexity of the NIGPM generated for different goal priorities. The experimental results presented in this paper show their effectiveness in solving the admission capacity for higher education in terms of final solution quality and robustness. PMID:26819583
El-Qulity, Said Ali; Mohamed, Ali Wagdy
2016-01-01
This paper proposes a nonlinear integer goal programming model (NIGPM) for solving the general problem of admission capacity planning in a country as a whole. The work aims to satisfy most of the required key objectives of a country related to the enrollment problem for higher education. The system general outlines are developed along with the solution methodology for application to the time horizon in a given plan. The up-to-date data for Saudi Arabia is used as a case study and a novel evolutionary algorithm based on modified differential evolution (DE) algorithm is used to solve the complexity of the NIGPM generated for different goal priorities. The experimental results presented in this paper show their effectiveness in solving the admission capacity for higher education in terms of final solution quality and robustness.
Advanced technology for reducing aircraft engine pollution
NASA Technical Reports Server (NTRS)
Jones, R. E.
1973-01-01
The proposed EPA regulations covering emissions of gas turbine engines will require extensive combustor development. The NASA is working to develop technology to meet these goals through a wide variety of combustor research programs conducted in-house, by contract, and by university grant. In-house efforts using the swirl-can modular combustor have demonstrated sizable reduction in NO emission levels. Testing to reduce idle pollutants has included the modification of duplex fuel nozzles to air-assisted nozzles and an exploration of the potential improvements possible with combustors using fuel staging and variable geometry. The Experimental Clean Combustor Program, a large contracted effort, is devoted to the testing and development of combustor concepts designed to achieve a large reduction in the levels of all emissions. This effort is planned to be conducted in three phases with the final phase to be an engine demonstration of the best reduced emission concepts.
Acoustic emission non-destructive testing of structures using source location techniques.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Beattie, Alan G.
2013-09-01
The technology of acoustic emission (AE) testing has been advanced and used at Sandia for the past 40 years. AE has been used on structures including pressure vessels, fire bottles, wind turbines, gas wells, nuclear weapons, and solar collectors. This monograph begins with background topics in acoustics and instrumentation and then focuses on current acoustic emission technology. It covers the overall design and system setups for a test, with a wind turbine blade as the object. Test analysis is discussed with an emphasis on source location. Three test examples are presented, two on experimental wind turbine blades and one onmore » aircraft fire extinguisher bottles. Finally, the code for a FORTRAN source location program is given as an example of a working analysis program. Throughout the document, the stress is on actual testing of real structures, not on laboratory experiments.« less
Awareness programs and change in taste-based caste prejudice.
Banerjee, Ritwik; Datta Gupta, Nabanita
2015-01-01
Becker's theory of taste-based discrimination predicts that relative employment of the discriminated social group will improve if there is a decrease in the level of prejudice for the marginally discriminating employer. In this paper we experimentally test this prediction offered by Garry Becker in his seminal work on taste based discrimination, in the context of caste in India, with management students (potential employers in the near future) as subjects. First, we measure caste prejudice and show that awareness through a TV social program reduces implicit prejudice against the lower caste and the reduction is sustained over time. Second, we find that the treatment reduces the prejudice levels of those in the left tail of the prejudice distribution--the group which can potentially affect real outcomes as predicted by the theory. And finally, a larger share of the treatment group subjects exhibit favorable opinion about reservation in jobs for the lower caste.
United States Air Force Summer Research Program -- 1993. Volume 8. Phillips Laboratory
1993-12-01
Research Program Phillips Laboratory Kirtland Air Force Base Albuquerque. New Mexico Sponsored by...Best Available Copy UNITED STATES AIR FORCE SUMMER RESEARCH PROGRAM -- 1993 SUMMER RESEARCH PROGRAM FINAL REPORTS VOLUME 8 PHILLIPS LABORATORY ...Alabama Box 870344 Tuscaloosa, AL 35487-0344 Final Report for: Graduate Student Research Program Phillips Laboratory , Hanscom AFB Sponsored by: Air
2017-11-15
This major final rule addresses changes to the Medicare physician fee schedule (PFS) and other Medicare Part B payment policies such as changes to the Medicare Shared Savings Program, to ensure that our payment systems are updated to reflect changes in medical practice and the relative value of services, as well as changes in the statute. In addition, this final rule includes policies necessary to begin offering the expanded Medicare Diabetes Prevention Program model.
40 CFR Appendix C to Part 97 - Final Section 126 Rule: Trading Budget
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 21 2011-07-01 2011-07-01 false Final Section 126 Rule: Trading Budget... PROGRAMS (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS Pt. 97, App. C Appendix C to Part 97—Final Section 126 Rule: Trading Budget ST F126-EGU F126-NEGU Total DC 207 26...
40 CFR Appendix C to Part 97 - Final Section 126 Rule: Trading Budget
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 21 2014-07-01 2014-07-01 false Final Section 126 Rule: Trading Budget... PROGRAMS (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS Pt. 97, App. C Appendix C to Part 97—Final Section 126 Rule: Trading Budget ST F126-EGU F126-NEGU Total DC 207 26...
40 CFR Appendix C to Part 97 - Final Section 126 Rule: Trading Budget
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 22 2013-07-01 2013-07-01 false Final Section 126 Rule: Trading Budget... PROGRAMS (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS Pt. 97, App. C Appendix C to Part 97—Final Section 126 Rule: Trading Budget ST F126-EGU F126-NEGU Total DC 207 26...
40 CFR Appendix C to Part 97 - Final Section 126 Rule: Trading Budget
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 22 2012-07-01 2012-07-01 false Final Section 126 Rule: Trading Budget... PROGRAMS (CONTINUED) FEDERAL NOX BUDGET TRADING PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS Pt. 97, App. C Appendix C to Part 97—Final Section 126 Rule: Trading Budget ST F126-EGU F126-NEGU Total DC 207 26...
Reactivity loss validation of high burn-up PWR fuels with pile-oscillation experiments in MINERVE
DOE Office of Scientific and Technical Information (OSTI.GOV)
Leconte, P.; Vaglio-Gaudard, C.; Eschbach, R.
2012-07-01
The ALIX experimental program relies on the experimental validation of the spent fuel inventory, by chemical analysis of samples irradiated in a PWR between 5 and 7 cycles, and also on the experimental validation of the spent fuel reactivity loss with bum-up, obtained by pile-oscillation measurements in the MINERVE reactor. These latter experiments provide an overall validation of both the fuel inventory and of the nuclear data responsible for the reactivity loss. This program offers also unique experimental data for fuels with a burn-up reaching 85 GWd/t, as spent fuels in French PWRs never exceeds 70 GWd/t up to now.more » The analysis of these experiments is done in two steps with the APOLLO2/SHEM-MOC/CEA2005v4 package. In the first one, the fuel inventory of each sample is obtained by assembly calculations. The calculation route consists in the self-shielding of cross sections on the 281 energy group SHEM mesh, followed by the flux calculation by the Method Of Characteristics in a 2D-exact heterogeneous geometry of the assembly, and finally a depletion calculation by an iterative resolution of the Bateman equations. In the second step, the fuel inventory is used in the analysis of pile-oscillation experiments in which the reactivity of the ALIX spent fuel samples is compared to the reactivity of fresh fuel samples. The comparison between Experiment and Calculation shows satisfactory results with the JEFF3.1.1 library which predicts the reactivity loss within 2% for burn-up of {approx}75 GWd/t and within 4% for burn-up of {approx}85 GWd/t. (authors)« less
40 CFR 272.1201 - Minnesota State-administered program; Final authorization.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Minnesota State-administered program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS Minnesota § 272.1201 Minnesota State-administered program; Final authorization. Pursuant to section 3006(b) of RCRA, 42 U.S.C...
40 CFR 272.1201 - Minnesota State-administered program; Final authorization.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Minnesota State-administered program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS Minnesota § 272.1201 Minnesota State-administered program; Final authorization. Pursuant to section 3006(b) of RCRA, 42 U.S.C...
40 CFR 272.1201 - Minnesota State-administered program; Final authorization.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Minnesota State-administered program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS Minnesota § 272.1201 Minnesota State-administered program; Final authorization. Pursuant to section 3006(b) of RCRA, 42 U.S.C...
40 CFR 272.1201 - Minnesota State-administered program; Final authorization.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Minnesota State-administered program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS Minnesota § 272.1201 Minnesota State-administered program; Final authorization. Pursuant to section 3006(b) of RCRA, 42 U.S.C...
40 CFR 272.1651 - New York State-Administered Program: final authorization.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 26 2010-07-01 2010-07-01 false New York State-Administered Program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS New York § 272.1651 New York State-Administered Program: final authorization. (a) Pursuant to section 3006(b) of RCRA, 42...
Final Evaluation Report. 1976-1977. Title I Migrant Program. Publication Number: 76.59.
ERIC Educational Resources Information Center
Austin Independent School District, TX. Office of Research and Evaluation.
The final evaluation of the Elementary and Secondary Education Act Title I Migrant Program in the Austin, Texas Independent School District is reported. The program consisted of instructional, student recruitment, parental involvement, health services, and clothing components. The instructional component included programs for pre-kindergarten…
The Impact of Prior Programming Knowledge on Lecture Attendance and Final Exam
ERIC Educational Resources Information Center
Veerasamy, Ashok Kumar; D'Souza, Daryl; Lindén, Rolf; Laakso, Mikko-Jussi
2018-01-01
In this article, we report the results of the impact of prior programming knowledge (PPK) on lecture attendance (LA) and on subsequent final programming exam performance in a university level introductory programming course. This study used Spearman's rank correlation coefficient, multiple regression, Kruskal-Wallis, and Bonferroni correction…
40 CFR 272.1601 - New Mexico State-Administered Program: Final Authorization.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 28 2012-07-01 2012-07-01 false New Mexico State-Administered Program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS New Mexico § 272.1601 New Mexico State-Administered Program: Final Authorization. (a) Pursuant to section 3006(b) of RCRA...
40 CFR 272.1601 - New Mexico State-Administered Program: Final Authorization.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 27 2011-07-01 2011-07-01 false New Mexico State-Administered Program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS New Mexico § 272.1601 New Mexico State-Administered Program: Final Authorization. (a) Pursuant to section 3006(b) of RCRA...
40 CFR 272.1601 - New Mexico State-Administered Program: Final Authorization.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 27 2014-07-01 2014-07-01 false New Mexico State-Administered Program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS New Mexico § 272.1601 New Mexico State-Administered Program: Final Authorization. (a) Pursuant to section 3006(b) of RCRA...
40 CFR 272.1601 - New Mexico State-Administered Program: Final Authorization.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 28 2013-07-01 2013-07-01 false New Mexico State-Administered Program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS New Mexico § 272.1601 New Mexico State-Administered Program: Final Authorization. (a) Pursuant to section 3006(b) of RCRA...
40 CFR 272.2501 - Wisconsin State-administered program: Final authorization.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Wisconsin State-administered program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS Wisconsin § 272.2501 Wisconsin State-administered program: Final authorization. (a) Pursuant to section 3006(b) of RCRA, 42 U.S.C...
40 CFR 272.2501 - Wisconsin State-administered program; final authorization.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 27 2011-07-01 2011-07-01 false Wisconsin State-administered program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS Wisconsin § 272.2501 Wisconsin State-administered program; final authorization. Pursuant to section 3006(b) of RCRA, 42 U.S.C...
40 CFR 272.2501 - Wisconsin State-administered program: Final authorization.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 27 2014-07-01 2014-07-01 false Wisconsin State-administered program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS Wisconsin § 272.2501 Wisconsin State-administered program: Final authorization. (a) Pursuant to section 3006(b) of RCRA, 42 U.S.C...
40 CFR 272.2501 - Wisconsin State-administered program: Final authorization.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 28 2012-07-01 2012-07-01 false Wisconsin State-administered program... (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS Wisconsin § 272.2501 Wisconsin State-administered program: Final authorization. (a) Pursuant to section 3006(b) of RCRA, 42 U.S.C...
ERIC Educational Resources Information Center
Kniefel, Tanya M.
An evaluation design created to provide information for a multiple-project program of educational experimentation is presented. Project SEED (State Experimentation in Educational Development) became an official education effort in North Carolina on July 1, 1971. Model for the program was that of the State's ESEA Title III program with certain…
Bueno, Cleuber Rodrigo de Souza; Pereira, Mizael; Favaretto, Idvaldo Aparecido; Bortoluci, Carlos Henrique Fachin; Santos, Thais Caroline Pereira Dos; Dias, Daniel Ventura; Daré, Letícia Rossi; Rosa, Geraldo Marco
2017-01-01
To investigate if electrical stimulation through Russian current is able to maintain morphology of the cranial tibial muscle of experimentally denervated rats. Thirty-six Wistar rats were divided into four groups: the Initial Control Group, Final Control Group, Experimental Denervated and Treated Group, Experimental Denervated Group. The electrostimulation was performed with a protocol of Russian current applied three times per week, for 45 days. At the end, the animals were euthanized and histological and morphometric analyses were performed. Data were submitted to statistical analysis with a significance level of p<0.05. The Experimental Denervated Group and the Experimental Denervated and Treated Group had cross-sectional area of smaller fiber compared to the Final Control Group. However, there was significant difference between the Experimental Denervated Group and Experimental Denervated and Treated Group, showing that electrical stimulation minimized muscle atrophy. The Experimental Denervated and Treated Group and Initial Control Group showed similar results. Electrical stimulation through Russian current acted favorably in maintaining morphology of the cranial tibial muscle that was experimentally denervated, minimizing muscle atrophy. Investigar se a estimulação elétrica pela corrente russa é capaz de manter a morfologia do músculo tibial cranial de ratos desnervados experimentalmente. Foram utilizados 36 ratos Wistar, distribuídos em quatro grupos: Grupo Controle Inicial, Grupo Controle Final, Grupo Experimental Desnervado Tratado, Grupo Experimental Desnervado. A eletroestimulação foi realizada com um protocolo de corrente russa aplicada três vezes por semanas, durante 45 dias. Ao final, os animais foram eutanasiados e, em seguida, foram realizadas as análises histológica e morfométrica. Os dados foram submetidos à análise estatística, com nível de significância de p<0,05. Os Grupos Experimental Desnervado e o Grupo Experimental Desnervado Tratado apresentaram área de secção transversal da fibra menor quando comparados ao Grupo Controle Final. Entretanto, constatou-se diferença significativa entre o Grupo Experimental Desnervado e o Grupo Experimental Desnervado Tratado, mostrando que a estimulação elétrica minimizou atrofia muscular. Ainda, observou-se que o Grupo Experimental Desnervado Tratado apresentou resultados semelhantes ao Grupo Controle Inicial. A estimulação elétrica por meio da corrente russa foi favorável na manutenção da morfologia do músculo tibial cranial desnervado experimentalmente, minimizando a atrofia muscular.
2016-08-05
This final rule will update the hospice wage index, payment rates, and cap amount for fiscal year (FY) 2017. In addition, this rule changes the hospice quality reporting program, including adopting new quality measures. Finally, this final rule includes information regarding the Medicare Care Choices Model (MCCM).
2017-07-05
This final rule updates the Medicaid Eligibility Quality Control (MEQC) and Payment Error Rate Measurement (PERM) programs based on the changes to Medicaid and the Children's Health Insurance Program (CHIP) eligibility under the Patient Protection and Affordable Care Act. This rule also implements various other improvements to the PERM program.
ERIC Educational Resources Information Center
Little, Priscilla M. D.; Harris, Erin
As the amount of resources allocated to out-of-school (OST) programming and policymakers' demands for research-based results increase, there is increasing interest in rigorous research designs to examine OST program outcomes. This issue of "Out-of-School Time Evaluation Snapshots" reviews 27 quasi-experimental and experimental OST…
2014-01-06
The U.S. Office of Personnel Management (OPM) is issuing an interim final regulation to update the Federal Employees Health Benefits Program (FEHBP) and the Federal Employees Dental and Vision Insurance Program (FEDVIP) regulations to reflect updated election opportunities for participants in the Pathways Programs. The Pathways Programs were created by Executive Order (E.O.) 13562, signed by the President on December 27, 2010, and are designed to enable the Federal Government to compete effectively for students and recent graduates by improving its recruitment efforts through internships and similar programs with Federal agencies. This interim final rule furthers these recruitment and retention efforts by providing health insurance, as well as dental and vision benefits, to eligible program participants and their families.
finalized amendments to the New Source Review (NSR) Prevention of Significant Deterioration (PSD) permitting program that will allow the EPA to delegate administration of the program to interested and qualified tribal agencies.
ERIC Educational Resources Information Center
Boyter-Escalona, Margaret
Final evaluation of the Workplace Education Program, funded by the National Workplace Literacy Program to provide workplace literacy education programs to 425 members of Chicago (Illinois) area clothing and textile workers union members, is presented. The program's goal was to enhance workers' basic literacy skills for present job stabilization…
Renewable Fuel Standard Program (RFS1): Final Rule Additional Resources
The final rule of fuels and fuel additives: renewable fuel standard program is published on May 1, 2007 and is effective on September 1, 2007. You will find the links to this final rule and technical amendments supporting this rule.
1987-06-15
001 GENERAL DYNAMICS 00 FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY MODERNIZATION PROGRAM Phase 2 Final Project Repc t JUNG 0 ?7 PROJECT 28 AUTOMATION...DYNAMICS FORT WORTH DIVISION INDUSTRIAL TECHNOLOGY MODERNIZATION PROGRAM Phase 2 Final Project Report PROJECT 28 AUTOMATION OF RECEIVING, RECEIVING...13 6 PROJECT ASSUMPTIONS 20 7 PRELIMINARY/FINAL DESIGN AND FINDINGS 21 8 SYSTEM/EQUIPMENT/MACHINING SPECIFICATIONS 37 9 VENDOR/ INDUSTRY ANALYSIS
Requirements Doc for Refurb of JASPER Facility in B131HB
DOE Office of Scientific and Technical Information (OSTI.GOV)
Knittel, Kenn M.
The Joint Actinide Shock Physics Experimental Research (JASPER) Program target fabrication facility is currently located in building 131 (B131) of the Lawrence Livermore National Laboratory (LLNL). A portion of this current facility has been committed to another program as part of a larger effort to consolidate LLNL capabilities into newer facilities. This facility assembles precision targets for scientific studies at the Nevada National Security Site (NNSS). B131 is also going through a modernization project to upgrade the infrastructure and abate asbestos. These activities will interrupt the continuous target fabrication efforts for the JASPER Program. Several options are explored to meetmore » the above conflicting requirements, with the final recommendation to prepare a new facility for JASPER target fabrication operations before modernization efforts begin in the current facility assigned to JASPER. This recommendation fits within all schedule constraints and minimizes the disruption to the JASPER Program. This option is not without risk, as it requires moving an aged, precision coordinate measuring machine, which is essential to the JASPER Program’s success. The selected option balances the risk to the machine with continuity of operations.« less
Quantum steering: a review with focus on semidefinite programming.
Cavalcanti, D; Skrzypczyk, P
2017-02-01
Quantum steering refers to the non-classical correlations that can be observed between the outcomes of measurements applied on half of an entangled state and the resulting post-measured states that are left with the other party. From an operational point of view, a steering test can be seen as an entanglement test where one of the parties performs uncharacterised measurements. Thus, quantum steering is a form of quantum inseparability that lies in between the well-known notions of Bell nonlocality and entanglement. Moreover, quantum steering is also related to several asymmetric quantum information protocols where some of the parties are considered untrusted. Because of these facts, quantum steering has received a lot of attention both theoretically and experimentally. The main goal of this review is to give an overview of how to characterise quantum steering through semidefinite programming. This characterisation provides efficient numerical methods to address a number of problems, including steering detection, quantification, and applications. We also give a brief overview of some important results that are not directly related to semidefinite programming. Finally, we make available a collection of semidefinite programming codes that can be used to study the topics discussed in this article.
Head Start Program and Cost Data Analysis: Final Report - Volume II.
ERIC Educational Resources Information Center
Cordes, Joseph; And Others
This second volume of the Head Start Program and Cost Data Analysis Final Report analyzes data from sources other than the Head Start Program Information Report (PIR). The report is divided into three sections: Distributional Impact of Head Start Financing, Pilot Study of Program Compliance, and Recommendations for Secondary Data Analysis. The…
76 FR 6564 - Florida: Final Authorization of State Hazardous Waste Management Program Revisions
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-07
...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... implement the RCRA hazardous waste management program. We granted authorization for changes to their program..., 06/ 62-730.185(1) F.A.C. Universal Waste Management. 29/07. State Initiated Changes to the 62-730.210...
Selection and Validation of Model Early Childhood Projects: Final Report.
ERIC Educational Resources Information Center
Stock, John R.; And Others
Presented is the final report of a research program to select and describe outstanding Handicapped Children's Early Education Program (HCEEP) projects. Projects were analyzed in terms of 14 components of an HCEEP program (such as screening, programing, and inservice training). A detailed discussion of model selection and validation is appendixed.)…
76 FR 23795 - Low-Power Television and Translator Upgrade Program: Notice of Final Closing Date
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-28
.... 110418247-1247-01] Low-Power Television and Translator Upgrade Program: Notice of Final Closing Date AGENCY... receipt of applications for the Low-Power Television and Translator Upgrade Program (Upgrade Program) will... Rules to Establish Rules for Digital Low Power Television, Television Translator, and Television Booster...
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Final Section 126 Rule: State Compliance supplement pools for the Section 126 Final Rule (Tons) D Appendix D to Part 97 Protection of... PROGRAM AND CAIR NOX AND SO2 TRADING PROGRAMS Pt. 97, App. D Appendix D to Part 97—Final Section 126 Rule...
Methodological convergence of program evaluation designs.
Chacón-Moscoso, Salvador; Anguera, M Teresa; Sanduvete-Chaves, Susana; Sánchez-Martín, Milagrosa
2014-01-01
Nowadays, the confronting dichotomous view between experimental/quasi-experimental and non-experimental/ethnographic studies still exists but, despite the extensive use of non-experimental/ethnographic studies, the most systematic work on methodological quality has been developed based on experimental and quasi-experimental studies. This hinders evaluators and planners' practice of empirical program evaluation, a sphere in which the distinction between types of study is changing continually and is less clear. Based on the classical validity framework of experimental/quasi-experimental studies, we carry out a review of the literature in order to analyze the convergence of design elements in methodological quality in primary studies in systematic reviews and ethnographic research. We specify the relevant design elements that should be taken into account in order to improve validity and generalization in program evaluation practice in different methodologies from a practical methodological and complementary view. We recommend ways to improve design elements so as to enhance validity and generalization in program evaluation practice.
Numerical simulation of liquid-layer breakup on a moving wall due to an impinging jet
NASA Astrophysics Data System (ADS)
Yu, Taejong; Moon, Hojoon; You, Donghyun; Kim, Dokyun; Ovsyannikov, Andrey
2014-11-01
Jet wiping, which is a hydrodynamic method for controlling the liquid film thickness in coating processes, is constrained by a rather violent film instability called splashing. The instability is characterized by the ejection of droplets from the runback flow and results in an explosion of the film. The splashing phenomenon degrades the final coating quality. In the present research, a volume-of-fluid (VOF)-based method, which is developed at Cascade Technologies, is employed to simulate the air-liquid multiphase flow dynamics. The present numerical method is based on an unstructured-grid unsplit geometric VOF scheme and guarantees strict conservation of mass of two-phase flow, The simulation results are compared with experimental measurements such as the liquid-film thickness before and after the jet wiping, wall pressure and shear stress distributions. The trajectories of liquid droplets due to the fluid motion entrained by the gas-jet operation, are also qualitatively compared with experimental visualization. Physical phenomena observed during the liquid-layer breakup due to an impinging jet is characterized in order to develop ideas for controlling the liquid-layer instability and resulting splash generation and propagation. Supported by the Grant NRF-2012R1A1A2003699, the Brain Korea 21+ program, POSCO, and 2014 CTR Summer Program.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-06-29
...-identified research designs to generate reliable and valid findings. Changes: None. Final Priorities Priority... DEPARTMENT OF EDUCATION Final Priorities; Disability and Rehabilitation Research Projects and Centers Program--Disability Rehabilitation Research Projects, etc. AGENCY: Office of Special Education and...
Research Laboratory for Engineering and Tehnology (ReLEnT)-Summer Program
NASA Technical Reports Server (NTRS)
Okhio, Cyril B.
1996-01-01
During the fiscal years 1994-1995 students at Central State University (CSU) have worked diligently under the supervision of the PI and associates to plan, design and conduct a four-week hands on summer program for high school students in grades 9 to 12. These workshops consists of experiments and computer aided design and manufacturing, designed to constructively stimulate interests in engineering and technology, and promote enrollment at CSU after they matriculate from high school. The experience gained in two years will be utilized to realize one of the deliverables for CSU engineering program during 1996. In FY-96 a new total of 30 students are now being interviewed for the 1996 program. This grant also provides resource for students enrolled in CSU's engineering program to work as undergraduate research assistants and ReLEnT tuition scholarship awards. These students are involved in the development of research, design projects, workshop procedures, laboratory exercises and seminars. Undergraduate students receiving tuition scholarships are required to maintain a cumulative grade point average of 3.0 or higher. Finally, the ReLEnT award has made it possible for CSU to acquire some experimental and CFD capability which now provides us with the opportunity to compete and respond to RFP's on a competitive basis and a timely manner.
Effective Management of Ocean Biogeochemistry and Ecological Data: the BCO-DMO Story
NASA Astrophysics Data System (ADS)
Chandler, C. L.; Groman, R. C.; Allison, M. D.; Wiebe, P. H.; Glover, D. M.; Gegg, S. R.
2012-04-01
Data availability expectations of the research community, environmental management decision makers, and funding agency representatives are changing. Consequently, data management practices in many science communities are changing as well. In an effort to improve access to data generated by ocean biogeochemistry and ecological researchers funded by the United States (US) National Science Foundation (NSF) Division of Ocean Sciences (OCE), the Biological and Chemical Oceanography Data Management Office (BCO-DMO) was created in late 2006. Currently, the main BCO-DMO objective is to ensure availability of data resulting from select OCE and Office of Polar Programs (OPP) research awards granted by the US NSF. An important requirement for the BCO-DMO data management system is that it provides open access to data that are supported by sufficient metadata to enable data discovery and accurate reuse. The office manages and serves all types of oceanographic data (in situ, experimental, model results) generated during the research process and contributed by the originating investigators from large national programs and medium-sized collaborative research projects, as well as researchers with single investigator awards. BCO-DMO staff members have made strategic use of standards and use of terms from controlled vocabularies while balancing the need to maintain flexible data ingest systems that accommodate the heterogeneous nature of ocean biogeochemistry and ecological research data. Many of the discrete ocean biogeochemistry data sets managed by BCO-DMO are still acquired manually, often with prototype sensor systems. Data sets such as these that are not "born-digital" present a significant management challenge. Use of multiple levels of term-mappings and development of an ontology has enabled BCO-DMO to incorporate a semantically enabled faceted search into the data access system that will improve data access through enhanced data discovery. BCO-DMO involves an ongoing collaboration between data managers and marine scientists funded by the US NSF. BCO-DMO staff members work with investigators throughout the data life cycle, beginning with the data management plan that is part of the original proposal, during cruise planning and experimental design, through data reporting to meet funding agency requirements and finally to submission of final data sets for publication and final archive in a permanent data center. It is important to note that support from and continued active involvement of the NSF program managers has been a significant contributor to the success of this developing system. URL: http://bco-dmo.org/
ERIC Educational Resources Information Center
Indiana Univ., Bloomington.
This paper presents the final report on a project that brought African social studies education leaders to Indiana University (Bloomington) to take part in a Master's Degree program. The report contains a brief history of the program, a description of the program, a discussion of issues relating to acculturation, an evaluation, a list of…
Adiabatically-controlled two-qubit gates using quantum dot hybrid qubits
NASA Astrophysics Data System (ADS)
Frees, Adam; Gamble, John King; Friesen, Mark; Coppersmith, S. N.
With its recent success in experimentally performing single-qubit gates, the quantum dot hybrid qubit is an excellent candidate for two-qubit gating. Here, we propose an operational scheme which exploits the electrostatic properties of such qubits to yield a tunable effective coupling in a system with a static capacitive coupling between the dots. We then use numerically calculated fidelities to demonstrate the effect of charge noise on single- and two-qubit gates with this scheme. Finally, we show steps towards optimizing the gates fidelities, and discuss ways that the scheme could be further improved. This work was supported in part by ARO (W911NF-12-0607) (W911NF-12-R-0012), NSF (PHY-1104660), ONR (N00014-15-1-0029). The authors gratefully acknowledge support from the Sandia National Laboratories Truman Fellowship Program, which is funded by the Laboratory Directed Research and Development (LDRD) Program. Sandia is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the US Department of Energy's National Nuclear Security Administration under Contract No. DE-AC04-94AL85000.
NASA Astrophysics Data System (ADS)
Lin, Hanxuan; Liu, Hao; Bai, Yu; Miao, Tian; Yu, Yang; Zhu, Yinyan; Chen, Hongyan; Kou, Yunfang; Niu, Jiebin; Wang, Wenbin; Yin, Lifeng; Shen, Jian
First order metal-insulator transition, accounting for various intriguing phenomena, is one of the most important phase transitions in condensed matter systems. Aside from the initial and final states, i.e. the metallic and insulating phases, no stable intermediate phase has been experimentally identified in such first order phase transition, though some transient phases do exist at the ultrafast time scale. Here, using our unique low-temperature, high-field magnetic force microscopy with photoexcitation, we directly observed a stable intermediate phase emerging and mediating the photoinduced first order metal-insulator transition in manganites. This phase is characteristic of low net magnetization and high resistivity. Our observations unveil the microscopic details of the photoinduced metal-insulator transition in manganites, which may be insightful to study first order metal-insulator transition in other condensed matter systems. This work was supported by National Key Research Program of China (2016YFA0300702), National Basic Research Program of China (973 Program) under the Grant No. 2013CB932901 and 2014CB921104; National Natural Science Foundation of China (11274071, 11504053).
Nu-Way Snaps and Snap Leads: an Important Connection in the History of Behavior Analysis.
Escobar, Rogelio; Lattal, Kennon A
2014-10-01
Beginning in the early 1950s, the snap lead became an integral and ubiquitous component of the programming of electromechanical modules used in behavioral experiments. It was composed of a Nu-Way snap connector on either end of a colored electrical wire. Snap leads were used to connect the modules to one another, thereby creating the programs that controlled contingencies, arranged reinforcers, and recorded behavior in laboratory experiments. These snap leads populated operant conditioning laboratories from their inception until the turn of the twenty-first century. They allowed quick and flexible programming because of the ease with which they could be connected, stacked, and removed. Thus, the snap lead was integral to the research activity that constituted the experimental analysis of behavior for more than five decades. This review traces the history of the snap lead from the origins of the snap connector in Birmingham, England, in the late eighteenth century, through the use of snaps connected to wires during the Second World War, to its adoption in operant laboratories, and finally to its demise in the digital age.
76 FR 19909 - International Terrorism Victim Expense Reimbursement Program
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-11
... 1121-AA78 International Terrorism Victim Expense Reimbursement Program AGENCY: Office of Justice... promulgating this interim-final rule for its International Terrorism Victim Expense Reimbursement Program... international terrorism. DATES: Effective date: This interim-final rule is effective April 11, 2011. Comment...
76 FR 18624 - Research, Technical Assistance and Training Programs: Notice of Final Circular
Federal Register 2010, 2011, 2012, 2013, 2014
2011-04-04
... to FTA Circular 6100.1D, Research and Technical Assistance Training Program: Application Instructions... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Research, Technical Assistance and Training Programs: Notice of Final Circular AGENCY: Federal Transit Administration (FTA), DOT. ACTION...
Medicaid program; health care-related taxes. Final rule.
2009-06-30
This rule finalizes our proposal to delay enforcement of certain clarifications regarding standards for determining hold harmless arrangements in the final rule entitled, "Medicaid Program; Health Care-Related Taxes" from the expiration of a Congressional moratorium on enforcement from July 1, 2009 to June 30, 2010.
Attitudes of College Freshmen in an Experimental Program.
ERIC Educational Resources Information Center
Smith, M. Daniel
This report describes the results of 2 questionnaires designed to measure students' perceptions of and satisfaction with aspects of their small liberal arts college environment. The test was administered to samples of students enrolled in the experimental program, alternates (students who had volunteered for the experimental program but were not…
Computational modeling of RNA 3D structures, with the aid of experimental restraints
Magnus, Marcin; Matelska, Dorota; Łach, Grzegorz; Chojnowski, Grzegorz; Boniecki, Michal J; Purta, Elzbieta; Dawson, Wayne; Dunin-Horkawicz, Stanislaw; Bujnicki, Janusz M
2014-01-01
In addition to mRNAs whose primary function is transmission of genetic information from DNA to proteins, numerous other classes of RNA molecules exist, which are involved in a variety of functions, such as catalyzing biochemical reactions or performing regulatory roles. In analogy to proteins, the function of RNAs depends on their structure and dynamics, which are largely determined by the ribonucleotide sequence. Experimental determination of high-resolution RNA structures is both laborious and difficult, and therefore, the majority of known RNAs remain structurally uncharacterized. To address this problem, computational structure prediction methods were developed that simulate either the physical process of RNA structure formation (“Greek science” approach) or utilize information derived from known structures of other RNA molecules (“Babylonian science” approach). All computational methods suffer from various limitations that make them generally unreliable for structure prediction of long RNA sequences. However, in many cases, the limitations of computational and experimental methods can be overcome by combining these two complementary approaches with each other. In this work, we review computational approaches for RNA structure prediction, with emphasis on implementations (particular programs) that can utilize restraints derived from experimental analyses. We also list experimental approaches, whose results can be relatively easily used by computational methods. Finally, we describe case studies where computational and experimental analyses were successfully combined to determine RNA structures that would remain out of reach for each of these approaches applied separately. PMID:24785264
2016-11-14
This final rule with comment period revises the Medicare hospital outpatient prospective payment system (OPPS) and the Medicare ambulatory surgical center (ASC) payment system for CY 2017 to implement applicable statutory requirements and changes arising from our continuing experience with these systems. In this final rule with comment period, we describe the changes to the amounts and factors used to determine the payment rates for Medicare services paid under the OPPS and those paid under the ASC payment system. In addition, this final rule with comment period updates and refines the requirements for the Hospital Outpatient Quality Reporting (OQR) Program and the ASC Quality Reporting (ASCQR) Program. Further, in this final rule with comment period, we are making changes to tolerance thresholds for clinical outcomes for solid organ transplant programs; to Organ Procurement Organizations (OPOs) definitions, outcome measures, and organ transport documentation; and to the Medicare and Medicaid Electronic Health Record Incentive Programs. We also are removing the HCAHPS Pain Management dimension from the Hospital Value-Based Purchasing (VBP) Program. In addition, we are implementing section 603 of the Bipartisan Budget Act of 2015 relating to payment for certain items and services furnished by certain off-campus provider-based departments of a provider. In this document, we also are issuing an interim final rule with comment period to establish the Medicare Physician Fee Schedule payment rates for the nonexcepted items and services billed by a nonexcepted off-campus provider-based department of a hospital in accordance with the provisions of section 603.
Process development for automated solar cell and module production. Task 4: Automated array assembly
NASA Technical Reports Server (NTRS)
Hagerty, J. J.
1981-01-01
Progress in the development of automated solar cell and module production is reported. The unimate robot is programmed for the final 35 cell pattern to be used in the fabrication of the deliverable modules. The mechanical construction of the automated lamination station and final assembly station phases are completed and the first operational testing is underway. The final controlling program is written and optimized. The glass reinforced concrete (GRC) panels to be used for testing and deliverables are in production. Test routines are grouped together and defined to produce the final control program.
The National Evaluation of School Nutrition Programs. Final Report - Executive Summary.
ERIC Educational Resources Information Center
Radzikowski, Jack
This is a summary of the final report of a study (begun in 1979) of the National School Lunch, School Breakfast, and Special Milk Programs. The major objectives of the evaluation were to (1) identify existing information on the school nutrition programs; (2) identify determinants of participation in the programs and develop statistical models for…
CSMP Mathematics for Kindergarten, Teacher's Guide [and] Worksheets. Final Experimental Version.
ERIC Educational Resources Information Center
Vandeputte, Christiane
This guide represents the final experimental version of an extended pilot project which was conducted in the United States between 1973 and 1976. The manner of presentation and the pedagogical ideas and tools are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings…
NASA Astrophysics Data System (ADS)
Murray, Kimberly
The purpose of this study was to determine the effects of online learning aids on student performance and engagement. The thirty-five participants of the current study were students enrolled in two sections of a junior level Medical Microbiology laboratory. The experimental section was required to spend ten minutes each week on an online learning aid. The online program, StudyMate(TM), was used to present text and images in the form of flash cards, multiple choice questions, matching, and crossword puzzles. Both groups completed the Index of Learning Style survey, an initial engagement survey at the start of the course, and a final engagement survey at the end of the course. Statistical analysis showed no significant differences between the groups at the start of the course or after the course was completed for learning style, science grade point average, overall grade point average, initial engagement or final engagement. A moderate correlation was found between microbiology course and laboratory grades and a reflective learning style.
NEET-AMM Final Technical Report on Laser Direct Manufacturing (LDM) for Nuclear Power Components
DOE Office of Scientific and Technical Information (OSTI.GOV)
Anderson, Scott; Baca, Georgina; O'Connor, Michael
2015-12-31
Final technical report summarizes the program progress and technical accomplishments of the Laser Direct Manufacturing (LDM) for Nuclear Power Components project. A series of experiments varying build process parameters (scan speed and laser power) were conducted at the outset to establish the optimal build conditions for each of the alloys. Fabrication was completed in collaboration with Quad City Manufacturing Laboratory (QCML). The density of all sample specimens was measured and compared to literature values. Optimal build process conditions giving fabricated part densities close to literature values were chosen for making mechanical test coupons. Test coupons whose principal axis is onmore » the x-y plane (perpendicular to build direction) and on the z plane (parallel to build direction) were built and tested as part of the experimental build matrix to understand the impact of the anisotropic nature of the process.. Investigations are described 316L SS, Inconel 600, 718 and 800 and oxide dispersion strengthed 316L SS (Yttria) alloys.« less
Monitoring of Air Pollution by Satellites (MAPS), phase 1
NASA Technical Reports Server (NTRS)
Ludwig, C. B.; Malkmus, W.; Griggs, M.; Bartle, E. R.
1972-01-01
Results are reported upon which the design of a satellite remote gas filter correlation (RGFC) instrument can be based. Although a final decision about the feasibility of measuring some of the pollutants with the required accuracy is still outstanding and subject to further theoretical and experimental verifications, viable concepts are presented which permit the initiation of the design phase. The pollutants which are of concern in the troposphere and stratosphere were selected. The infrared bands of these pollutants were identified, together with the bands of interfering gases, and the line parameters of the pollutants as well as interfering gases were generated through a computer program. Radiative transfer calculations (line-by-line) were made to establish the radiation levels at the top of the atmosphere and the signal levels at the detector of the RGFC instrument. Based upon these results the channels for the RGFC were selected. Finally, the problem areas, which need further investigations, were delineated and the supporting data requirements were established.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lee, S.Y.
1999-06-01
The report discusses a joint US/Mexican program to establish a reliable emissions inventory for street vendor cooking devices (charcoal grilling), a significant source of air pollutants in the Mexicali-Imperial Valley area of Mexico. Emissions from these devices, prevalent in the streets of Mexicali, Mexico, were investigated experimentally by measuring levels of particulate matter, particle size distributions, volatile and semivolatile organic compounds, aldehydes, and oxides of nitrogen and sulfur, emitted when meat is cooked on a grill over a charcoal fire. To investigate the emission rate, both beef and chicken were tested. Furthermore, both meats were marinated with a mixture similarmore » to that used by the street vendors. Some tests were conducted with non-marinated beef for comparison. Two blank runs were performed sampling charcoal fires without meat. Finally, a simple control device, normally used in an exhaust fan to trap grease over a kitchen stove, was evaluated for its effectiveness in reducing emissions.« less
Appendices for EPAct/V2/E-89 Final Report on Program Design and Data Collection
This page contains the appendices A through P for EPAct/V2/E-89 Final Report on Program Design and Data Collection - First Report (PDF).Program design and data collection activities are described in the above report.
77 FR 60581 - Compensation, Retirement Programs, and Related Benefits
Federal Register 2010, 2011, 2012, 2013, 2014
2012-10-03
..., 612, 619 et al. Compensation, Retirement Programs, and Related Benefits; Final Rule #0;#0;Federal... Programs, and Related Benefits AGENCY: Farm Credit Administration. ACTION: Final rule. SUMMARY: The Farm... and associations to require disclosure of pension benefit and supplemental retirement plans and a...
40 CFR 272.951 - Louisiana state-administered program: Final authorization.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 28 2013-07-01 2013-07-01 false Louisiana state-administered program: Final authorization. 272.951 Section 272.951 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED) APPROVED STATE HAZARDOUS WASTE MANAGEMENT PROGRAMS Louisiana § 272.951...
This final rule describes EPA’s evaluation of biofuels derived from biogas fuel pathways under the RFS program and other minor amendments related to survey requirements associated with ULSD program and misfueling mitigation regulations for E15.
2016-11-15
This major final rule addresses changes to the physician fee schedule and other Medicare Part B payment policies, such as changes to the Value Modifier, to ensure that our payment systems are updated to reflect changes in medical practice and the relative value of services, as well as changes in the statute. This final rule also includes changes related to the Medicare Shared Savings Program, requirements for Medicare Advantage Provider Networks, and provides for the release of certain pricing data from Medicare Advantage bids and of data from medical loss ratio reports submitted by Medicare health and drug plans. In addition, this final rule expands the Medicare Diabetes Prevention Program model.
ERIC Educational Resources Information Center
Wight, Byron W.
The document contains the final report of the Special Programs for Individualized Needs (SPIN) program designed to develop a demonstration model for training day care personnel to identify developmentally delayed or emotionally disturbed children and to program for them within the regular day care setting. Major objectives were to develop…
NASA's Space Environments and Effects (SEE) Program: The Pursuit of Tomorrow's Space Technology
NASA Technical Reports Server (NTRS)
Pearson, Steven D.; Hardage, Donna M.
1998-01-01
A hazard to all spacecraft orbiting the earth and exploring the unknown in deep space is the existence of a harsh and ever changing environment with its subsequent effects. Some of these environmental hazards, such as plasma, extreme thermal excursions, meteoroids, and ionizing radiation result from natural sources, whereas others, such as orbital debris and neutral contamination are induced by the presence of spacecraft themselves. The subsequent effects can provide damaging or even disabling effects on spacecraft, its materials, and its instruments. In partnership with industry, academia, and other government agencies, National Aeronautics & Space Administration's (NASA's) Space Environments & Effects (SEE) Program defines the space environments and advocates technology development to accommodate or mitigate these harmful environments on the spacecraft. This program provides a very comprehensive and focused approach to understanding the space environment, to define the best techniques for both flight and ground-based experimentation, to update the models which predict both the environments and the environmental effects on spacecraft, and finally to ensure that this information is properly maintained and inserted into spacecraft design programs. This paper will provide an overview of the Program's purpose, goals, database management and technical activities. In particular, the SEE Program has been very active in developing improved ionizing radiation models and developing related flight experiments which should aid in determining the effect of the radiation environment on modern electronics.
Nondestructive analysis and development
NASA Technical Reports Server (NTRS)
Moslehy, Faissal A.
1993-01-01
This final report summarizes the achievements of project #4 of the NASA/UCF Cooperative Agreement from January 1990 to December 1992. The objectives of this project are to review NASA's NDE program at Kennedy Space Center (KSC) and recommend means for enhancing the present testing capabilities through the use of improved or new technologies. During the period of the project, extensive development of a reliable nondestructive, non-contact vibration technique to determine and quantify the bond condition of the thermal protection system (TPS) tiles of the Space Shuttle Orbiter was undertaken. Experimental modal analysis (EMA) is used as a non-destructive technique for the evaluation of Space Shuttle thermal protection system (TPS) tile bond integrity. Finite element (FE) models for tile systems were developed and were used to generate their vibration characteristics (i.e. natural frequencies and mode shapes). Various TPS tile assembly configurations as well as different bond conditions were analyzed. Results of finite element analyses demonstrated a drop in natural frequencies and a change in mode shapes which correlate with both size and location of disbond. Results of experimental testing of tile panels correlated with FE results and demonstrated the feasibility of EMA as a viable technique for tile bond verification. Finally, testing performed on the Space Shuttle Columbia using a laser doppler velocimeter demonstrated the application of EMA, when combined with FE modeling, as a non-contact, non-destructive bond evaluation technique.
2014-03-12
This final rule establishes the Basic Health Program (BHP), as required by section 1331 of the Affordable Care Act. The BHP provides states the flexibility to establish a health benefits coverage program for low-income individuals who would otherwise be eligible to purchase coverage through the Affordable Insurance Exchange (Exchange, also called Health Insurance Marketplace). The BHP complements and coordinates with enrollment in a QHP through the Exchange, as well as with enrollment in Medicaid and the Children's Health Insurance Program (CHIP). This final rule also sets forth a framework for BHP eligibility and enrollment, benefits, delivery of health care services, transfer of funds to participating states, and federal oversight. Additionally, this final rule amends another rule issued by the Secretary of the Department of Health and Human Services (Secretary) in order to clarify the applicability of that rule to the BHP.
75 FR 12003 - Investing in Innovation Fund
Federal Register 2010, 2011, 2012, 2013, 2014
2010-03-12
..., Proposed Practice, Strategy, or implemented experimental implemented strategy, or program, Program. study or well-designed experimental or quasi- or one similar to it, and well-implemented experimental study, has been attempted quasi-experimental with small sample sizes previously, albeit on a study; or (2...
Uzunovic, Slavoljub; Kostic, Radmila; Zivkovic, Dobrica
2010-09-01
This study aimed to determine the effects of two different programs of modern sports dancing on coordination, strength, and speed in 60 beginner-level female dancers, aged 13 and 14 yrs. The subjects were divided into two experimental groups (E1 and E2), each numbering 30 subjects, drawn from local dance clubs. In order to determine motor coordination, strength, and speed, we used 15 measurements. The groups were tested before and after the experimental programs. Both experimental programs lasted for 18 wks, with training sessions twice a week for 60 minutes. The subjects from the E1 group trained according to a new experimental program of disco dance (DD) modern sports dance, and the E2 group trained according to the classic DD program of the same kind for beginner selections. The obtained results were assessed by statistical analysis: a paired-samples t-test and MANCOVA/ANCOVA. The results indicated that following the experimental programs, both groups showed a statistically significant improvement in the evaluated skills, but the changes among the E1 group subjects were more pronounced. The basic assumption of this research was confirmed, that the new experimental DD program has a significant influence on coordination, strength, and speed. In relation to these changes, the application of the new DD program was recommended for beginner dancers.
2015-02-27
This final rule sets forth payment parameters and provisions related to the risk adjustment, reinsurance, and risk corridors programs; cost sharing parameters and cost-sharing reductions; and user fees for Federally-facilitated Exchanges. It also finalizes additional standards for the individual market annual open enrollment period for the 2016 benefit year, essential health benefits, qualified health plans, network adequacy, quality improvement strategies, the Small Business Health Options Program, guaranteed availability, guaranteed renewability, minimum essential coverage, the rate review program, the medical loss ratio program, and other related topics.
NASA Astrophysics Data System (ADS)
Shorikov, A. F.
2017-10-01
In this paper we study the problem of optimization of guaranteed result for program control by the final state of regional social and economic system in the presence of risks. For this problem we propose a mathematical model in the form of two-level hierarchical minimax program control problem of the final state of this process with incomplete information. For solving of its problem we constructed the common algorithm that has a form of a recurrent procedure of solving a linear programming and a finite optimization problems.
Kamravamanesh, Mastaneh; Kohan, Shahnaz; Rezavand, Negin; Farajzadegan, Ziba
2018-05-18
Long-term postpartum follow-up is of great importance since women with preeclampsia history are at high risk of upcoming health complications. However, postpartum follow-up rates are poor. According to evidences, preeclampsia is not just a transient health problem; rather it causes short term and long term complications, which affect women's life for years after delivery. Although it seems the problem is solved by the end of pregnancy, the follow-up of subjects should not be stopped after delivery. Postpartum is the best possible time to provide necessary care to these women who are at the risk of future complications. Due to importance of well-designed follow-up plan for women suffering preeclampsia, this study will carry out to provide a postpartum follow-up health care program for subjected women. This study is a qualitative-quantitative mixed sequencing exploratory study that consists of three consecutive phases. In this study, following a qualitative approach, the researcher will explain the needs and strategies related to promoting the health of women with preeclampsia history in the postpartum period. By entering the second phase, the researcher will design a comprehensive follow-up health care program in the postpartum period in which, in addition to using the qualitative study results, related papers and texts will be also used. The proposed program is designed by a panel of experts based on prioritization guidelines. Finally, after passing different stages of program finalizing, its effectiveness on the lifestyle of women with preeclampsia history will be investigated in a semi-experimental study in the third phase of the study. It is expected conducting a mixed method study to design and execute an interventional program to follow up women with preeclampsia history improve their health status and well-being, while reducing their health care costs through prevention in various levels within the current structure of health care services. If this program is effective, it could be included in the postpartum health care guidelines. IRCT20170927036445N2 Registered 10 March 2018.
2003-01-01
AFRL-IF-RS-TR-2002-315 Final Technical Report January 2003 THE EMERALD MISSION-BASED CORRELATION SYSTEM – AN EXPERIMENTAL DATA...2003 3. REPORT TYPE AND DATES COVERED Final Jan 02 – Jul 02 4. TITLE AND SUBTITLE THE EMERALD MISSION-BASED CORRELATION SYSTEM – AN EXPERIMENTAL...DISTRIBUTION CODE 13. ABSTRACT (Maximum 200 Words) This project was established to experiment on the efficacy of the SRI EMERALD Mission-based
2013-07-29
: We are extending our pilot program that authorizes the agency to set the time and place for a hearing before an administrative law judge (ALJ). This final rule will extend the pilot program for 1 year. The extension of the pilot program continues our commitment to improve the efficiency of our hearing process and maintain a hearing process that results in accurate, high-quality decisions for claimants. The current pilot program will expire on August 9, 2013. In this final rule, we are extending the effective date to August 9, 2014. We are making no other substantive changes.
2006-11-17
The Office of Personnel Management is issuing a final regulation to allow Peace Corps volunteers who are FEHB Program enrolled annuitants, survivors, and former spouses to suspend their FEHB enrollments and then return to the FEHB Program during the Open Season, or return to FEHB coverage immediately, if they involuntarily lose health benefits coverage under the Peace Corps. The intent of this final rule is to allow these beneficiaries to avoid the expense of continuing to pay FEHB Program premiums while they have other health coverage as Peace Corps volunteers, without endangering their ability to return to the FEHB Program in the future.
78 FR 25579 - Georgia: Final Authorization of State Hazardous Waste Management Program Revisions
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-02
... prohibitions imposed by Federal regulations that EPA promulgates pursuant to the Hazardous and Solid Waste...: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... authorization of changes to its hazardous waste program under the Resource Conservation and Recovery Act (RCRA...
7 CFR 1493.280 - Evidence of export report.
Code of Federal Regulations, 2013 CFR
2013-01-01
... OF AGRICULTURE EXPORT PROGRAMS CCC EXPORT CREDIT GUARANTEE PROGRAMS CCC Facility Guarantee Program... to provide CCC an evidence of export report for each shipment of goods or provision of services... provided were included in the final application for a final commitment as approved by CCC for coverage...
7 CFR 1493.280 - Evidence of export report.
Code of Federal Regulations, 2012 CFR
2012-01-01
... OF AGRICULTURE EXPORT PROGRAMS CCC EXPORT CREDIT GUARANTEE PROGRAMS CCC Facility Guarantee Program... to provide CCC an evidence of export report for each shipment of goods or provision of services... provided were included in the final application for a final commitment as approved by CCC for coverage...
7 CFR 1493.280 - Evidence of export report.
Code of Federal Regulations, 2014 CFR
2014-01-01
... OF AGRICULTURE EXPORT PROGRAMS CCC EXPORT CREDIT GUARANTEE PROGRAMS CCC Facility Guarantee Program... to provide CCC an evidence of export report for each shipment of goods or provision of services... provided were included in the final application for a final commitment as approved by CCC for coverage...
Primary lithium organic electrolyte battery BA-5588
NASA Astrophysics Data System (ADS)
Rosansky, M. G.
1982-07-01
This program concerns the development, fabrication and evaluation of a Lithium organic electrolyte battery designated BA-5588 ()/U which incorporates five series connected, hermetically sealed cells housed in a plastic case. Significant effort was directed towards cell optimization through controlled experimentation and evaluation of various design parameters. Demonstration of the effectiveness of the finalized design was accomplished by the performance of various electrical and abuse tests which included environmental exposure, prolonged thermal storage, electrical discharge under various thermal profiles, short circuit and discharge to zero volts as well as forced discharge. The resulting evaluation demonstrated the batteries ability to operate safely under all of the specified abusive environments and provide 100% of the specified service life requirements.
Stochastic switching of TiO2-based memristive devices with identical initial memory states
2014-01-01
In this work, we show that identical TiO2-based memristive devices that possess the same initial resistive states are only phenomenologically similar as their internal structures may vary significantly, which could render quite dissimilar switching dynamics. We experimentally demonstrated that the resistive switching of practical devices with similar initial states could occur at different programming stimuli cycles. We argue that similar memory states can be transcribed via numerous distinct active core states through the dissimilar reduced TiO2-x filamentary distributions. Our hypothesis was finally verified via simulated results of the memory state evolution, by taking into account dissimilar initial filamentary distribution. PMID:24994953
Condition Monitoring of Large-Scale Facilities
NASA Technical Reports Server (NTRS)
Hall, David L.
1999-01-01
This document provides a summary of the research conducted for the NASA Ames Research Center under grant NAG2-1182 (Condition-Based Monitoring of Large-Scale Facilities). The information includes copies of view graphs presented at NASA Ames in the final Workshop (held during December of 1998), as well as a copy of a technical report provided to the COTR (Dr. Anne Patterson-Hine) subsequent to the workshop. The material describes the experimental design, collection of data, and analysis results associated with monitoring the health of large-scale facilities. In addition to this material, a copy of the Pennsylvania State University Applied Research Laboratory data fusion visual programming tool kit was also provided to NASA Ames researchers.
Development of a green bipropellant hydrogen peroxide thruster for attitude control on satellites
NASA Astrophysics Data System (ADS)
Woschnak, A.; Krejci, D.; Schiebl, M.; Scharlemann, C.
2013-03-01
This document describes the selection assessment of propellants for a 1-newton green bipropellant thruster for attitude control on satellites. The development of this thruster was conducted as a part of the project GRASP (Green Advanced Space Propellants) within the European FP7 research program. The green propellant combinations hydrogen peroxide (highly concentrated with 87.5 %(wt.)) with kerosene or hydrogen peroxide (87.5 %(wt.)) with ethanol were identified as interesting candidates and were investigated in detail with the help of an experimental combustion chamber in the chemical propulsion laboratory at the Forschungsund Technologietransfer GmbH ― Fotec. Based on the test results, a final selection of propellants was performed.
Development of heat flux sensors for turbine airfoils
NASA Astrophysics Data System (ADS)
Atkinson, William H.; Cyr, Marcia A.; Strange, Richard R.
1985-10-01
The objectives of this program are to develop heat flux sensors suitable for installation in hot section airfoils of advanced aircraft turbine engines and to experimentally verify the operation of these heat flux sensors in a cylinder in a cross flow experiment. Embedded thermocouple and Gardon gauge sensors were developed and fabricated into both blades and vanes. These were then calibrated using a quartz lamp bank heat source and finally subjected to thermal cycle and thermal soak testing. These sensors were also fabricated into cylindrical test pieces and tested in a burner exhaust to verify heat flux measurements produced by these sensors. The results of the cylinder in cross flow tests are given.
Development of heat flux sensors for turbine airfoils
NASA Technical Reports Server (NTRS)
Atkinson, William H.; Cyr, Marcia A.; Strange, Richard R.
1985-01-01
The objectives of this program are to develop heat flux sensors suitable for installation in hot section airfoils of advanced aircraft turbine engines and to experimentally verify the operation of these heat flux sensors in a cylinder in a cross flow experiment. Embedded thermocouple and Gardon gauge sensors were developed and fabricated into both blades and vanes. These were then calibrated using a quartz lamp bank heat source and finally subjected to thermal cycle and thermal soak testing. These sensors were also fabricated into cylindrical test pieces and tested in a burner exhaust to verify heat flux measurements produced by these sensors. The results of the cylinder in cross flow tests are given.
Lana chimpanzee learns to count by 'numath' - A summary of a videotaped experimental report
NASA Technical Reports Server (NTRS)
Rumbaugh, Duane M.; Hopkins, William D.; Washburn, David A.; Savage-Rumbaugh, E. Sue
1989-01-01
Computerized training programs whereby an adult female chimpanzee learned to use a joystick to remove from a screen the number of boxes appropriate to the value of a randomly selected Arabic numeral 1, 2, or 3, are studied. Initial training provided a variety of cues, both numeric and otherwise, to support correct performance. In the final test, the ape was correct on over 80 percent of trials in which there was no residual feedback of intratrial events and where only her memory of those events could provide the cue to indicate that she had removed boxes in accordance with the value of the target numbers and should terminate the trial.
First satellite mobile communication trials using BLQS-CDMA
NASA Technical Reports Server (NTRS)
Luzdemateo, Maria; Johns, Simon; Dothey, Michel; Vanhimbeeck, Carl; Deman, Ivan; Wery, Bruno
1993-01-01
In this paper, technical results obtained in the first MSBN Land mobile technical trial are reported. MSBN (Mobile Satellite Business Network) is a new program undertaken by the European Space Agency (ESA) to promote mobile satellite communication in Europe, in particular voice capability. The first phase of the MSBN system implementation plan is an experimental phase. Its purpose is to evaluate through field experiments the performance of the MSBN system prior to finalization of its specifications. Particularly, the objective is to verify in the field and possibly improve the performance of the novel satellite access technique BLQS-CDMA (Band Limited Quasi-Synchronous-Code Division Multiple Access), which is proposed as baseline for the MSBN.
Space station wardroom habitability and equipment study
NASA Technical Reports Server (NTRS)
Nixon, David; Miller, Christopher; Fauquet, Regis
1989-01-01
Experimental designs in life-size mock-up form for the wardroom facility for the Space Station Habitability Module are explored and developed. In Phase 1, three preliminary concepts for the wardroom configuration are fabricated and evaluated. In Phase 2, the results of Phase 1 are combined with a specific range of program design requirements to provide the design criteria for the fabrication of an innovative medium-fidelity mock-up of a wardrobe configuration. The study also focuses on the design and preliminary prototyping of selected equipment items including crew exercise compartments, a meal/meeting table and a portable workstation. Design criteria and requirements are discussed and documented. Preliminary and final mock-ups and equipment prototypes are described and illustrated.
Dislocation dynamics: simulation of plastic flow of bcc metals
DOE Office of Scientific and Technical Information (OSTI.GOV)
Lassila, D H
This is the final report for the LDRD strategic initiative entitled ''Dislocation Dynamic: Simulation of Plastic Flow of bcc Metals'' (tracking code: 00-SI-011). This report is comprised of 6 individual sections. The first is an executive summary of the project and describes the overall project goal, which is to establish an experimentally validated 3D dislocation dynamics simulation. This first section also gives some information of LLNL's multi-scale modeling efforts associated with the plasticity of bcc metals, and the role of this LDRD project in the multiscale modeling program. The last five sections of this report are journal articles that weremore » produced during the course of the FY-2000 efforts.« less
Practical application of computer programs for supersonic combustion
NASA Technical Reports Server (NTRS)
Groves, F. R., Jr.
1972-01-01
Experimental data were interpreted using two supersonic combustion computer programs. The P1 program is based on a conventional boundary layer treatment of the mixing of concentric gas streams and complete combustion chemistry. The H1 program is based on a modified boundary layer approach which accounts for radial pressure gradients in the flow and also incorporates a finite rate chemistry calculation. The objective of the investigation was to compare the experimental data with theoretical predictions of the two programs with special emphasis on the prediction of radial pressure gradients by the H1 program. A test of the H1 program was also desired through comparison with the experimental data and with the P1 program.
1994-12-01
Research Group at the Phillips Laboratory at Kirtland Air Force Base...for Summer Graduate Student Research Program Phillips Laboratory Sponsored by: Air Force Office of Scientific Research Boiling Air Force Base, DC...2390 S. York Street Denver, CO 80208-0177 Final Report for: Summer Faculty Research Program Phillips Laboratory Sponsored by: Air Force
ERIC Educational Resources Information Center
North Central Technical Inst., Wausau, WI.
This final report contains the program proposal with supporting data for developing curriculum materials for and implementing an associate-degree laser technology program at the North Central Technical Institute. The proposal outline provides this information: (1) objectives for the program designed to prepare a technician to safely operate,…
ERIC Educational Resources Information Center
Tobias, Robert; And Others
Evaluation of the sixth and final year of operation for a preplacement program for 13 severely multiply handicapped deaf blind children, located in the Industrial Home for the Blind, is reported. The program is explained to prepare students for entrance into their existing special education programs. Qualitative findings on the physical setting,…
Mehra, Mamta; Vahidi, Farhad; Berg, Robert W
2014-06-01
The purpose of the study was to survey program directors of postdoctoral prosthodontic programs in the United States regarding their programs' complete denture impression techniques. The key objectives of the survey were to identify the current trends in complete denture impression making and to determine which techniques and materials are taught in US postdoctoral prosthodontic programs. An online survey was sent to all program directors of US postdoctoral prosthodontic programs. The survey comprised two sections: preliminary impressions and final impressions. The survey contained 22 questions that would take approximately 5 minutes to complete. All responses remained anonymous throughout the survey. The response rate for the survey was 87%. A majority of the programs did not separately border mold the tray prior to making the preliminary impressions (82%). The impression material of choice for the preliminary impression was irreversible hydrocolloid (88%). Selective pressure was the predominantly used impression philosophy (80%). All programs border molded the custom tray, and 95% recorded the borders in sections. The material of choice for border molding the custom tray was modeling plastic impression compound (71%). The most commonly used impression material for the final impressions was polyvinylsiloxane (PVS) (42%), and the second most commonly used impression material was polysulphide (32%). The most common technique for locating the posterior palatal seal was marking intraorally and transferring onto the final impression (65%). Most programs routinely advised their patients not to wear their existing dentures for at least 24 hours before the final impressions were made (83%). Based on the results of this study, the following conclusions can be drawn: (1) The most commonly used material for the preliminary impression was irreversible hydrocolloid and for the final impression was PVS. (2) Modeling plastic impression compound was used by most programs to border mold the custom trays. (3) Selective pressure was the predominantly used impression philosophy. (4) A majority of the programs made a special consideration for excessive movable (flabby) tissue. (5) Most programs routinely advised their patients to not wear their existing dentures for at least 24 hours before the final impressions were made. © 2013 by the American College of Prosthodontists.
2017-05-19
The Health Resources and Services Administration (HRSA) administers section 340B of the Public Health Service Act (PHSA), referred to as the "340B Drug Pricing Program" or the "340B Program." HRSA published a final rule on January 5, 2017, that set forth the calculation of the ceiling price and application of civil monetary penalties. The final rule applied to all drug manufacturers that are required to make their drugs available to covered entities under the 340B Program. In accordance with a January 20, 2017, memorandum from the Assistant to the President and Chief of Staff, entitled "Regulatory Freeze Pending Review," HRSA issued an interim final rule that delayed the effective date of the final rule published in the Federal Register (82 FR 1210, (January 5, 2017)) to May 22, 2017. HHS invited commenters to provide their views on whether a longer delay of the effective date to October 1, 2017, would be more appropriate. After consideration of the comments received on the interim final rule, HHS is delaying the effective date of the January 5, 2017 final rule, to October 1, 2017.
Annual Research Briefs - 2000: Center for Turbulence Research
NASA Technical Reports Server (NTRS)
2000-01-01
This report contains the 2000 annual progress reports of the postdoctoral Fellows and visiting scholars of the Center for Turbulence Research (CTR). It summarizes the research efforts undertaken under the core CTR program. Last year, CTR sponsored sixteen resident Postdoctoral Fellows, nine Research Associates, and two Senior Research Fellows, hosted seven short term visitors, and supported four doctoral students. The Research Associates are supported by the Departments of Defense and Energy. The reports in this volume are divided into five groups. The first group largely consists of the new areas of interest at CTR. It includes efficient algorithms for molecular dynamics, stability in protoplanetary disks, and experimental and numerical applications of evolutionary optimization algorithms for jet flow control. The next group of reports is in experimental, theoretical, and numerical modeling efforts in turbulent combustion. As more challenging computations are attempted, the need for additional theoretical and experimental studies in combustion has emerged. A pacing item for computation of nonpremixed combustion is the prediction of extinction and re-ignition phenomena, which is currently being addressed at CTR. The third group of reports is in the development of accurate and efficient numerical methods, which has always been an important part of CTR's work. This is the tool development part of the program which supports our high fidelity numerical simulations in such areas as turbulence in complex geometries, hypersonics, and acoustics. The final two groups of reports are concerned with LES and RANS prediction methods. There has been significant progress in wall modeling for LES of high Reynolds number turbulence and in validation of the v(exp 2) - f model for industrial applications.
Validation of NASA Thermal Ice Protection Computer Codes. Part 1; Program Overview
NASA Technical Reports Server (NTRS)
Miller, Dean; Bond, Thomas; Sheldon, David; Wright, William; Langhals, Tammy; Al-Khalil, Kamel; Broughton, Howard
1996-01-01
The Icing Technology Branch at NASA Lewis has been involved in an effort to validate two thermal ice protection codes developed at the NASA Lewis Research Center. LEWICE/Thermal (electrothermal deicing & anti-icing), and ANTICE (hot-gas & electrothermal anti-icing). The Thermal Code Validation effort was designated as a priority during a 1994 'peer review' of the NASA Lewis Icing program, and was implemented as a cooperative effort with industry. During April 1996, the first of a series of experimental validation tests was conducted in the NASA Lewis Icing Research Tunnel(IRT). The purpose of the April 96 test was to validate the electrothermal predictive capabilities of both LEWICE/Thermal, and ANTICE. A heavily instrumented test article was designed and fabricated for this test, with the capability of simulating electrothermal de-icing and anti-icing modes of operation. Thermal measurements were then obtained over a range of test conditions, for comparison with analytical predictions. This paper will present an overview of the test, including a detailed description of: (1) the validation process; (2) test article design; (3) test matrix development; and (4) test procedures. Selected experimental results will be presented for de-icing and anti-icing modes of operation. Finally, the status of the validation effort at this point will be summarized. Detailed comparisons between analytical predictions and experimental results are contained in the following two papers: 'Validation of NASA Thermal Ice Protection Computer Codes: Part 2- The Validation of LEWICE/Thermal' and 'Validation of NASA Thermal Ice Protection Computer Codes: Part 3-The Validation of ANTICE'
DOE Office of Scientific and Technical Information (OSTI.GOV)
Richman, R.H.; McNaughton, W.P.
1996-09-01
This report is the second of a two-volume set addressing the state-of-the-art and outlook for the application of biomimetic materials. The first volume examined achievements in mimicking novel aspects of biological systems in five broad categories: (1) Mimicking of Natural Material Designs, (2) Biomimetic Materials Processing, (3) Artificial Photosynthesis, (4) Biomimetic Molecular Electronics, and (5) Biomimetic Catalysis. Each topic was examined as to current activities and approaches, key aspects, unresolved issues, and implications for the power industry. Key researchers, their organizations, the main thrusts of investigation, achievements, and funding agencies were also summarized. This volume highlights opportunities for future researchmore » activities in biomimetics that could be valuable to the U.S. utility industry. Nineteen specific research projects have been identified. These opportunities are outlined in four classes: (1) technology awareness, (2) modeling and experimental studies, (3) state-of-the-art and outlook studies: developing experimental plans, and (4) concept feasibility studies.« less
RAINIER: A simulation tool for distributions of excited nuclear states and cascade fluctuations
Kirsch, L. E.; Bernstein, L. A.
2018-03-04
In this paper, a new code has been developed named RAINIER that simulates the γ-ray decay of discrete and quasi-continuum nuclear levels for a user-specified range of energy, angular momentum, and parity including a realistic treatment of level spacing and transition width fluctuations. A similar program, DICEBOX, uses the Monte Carlo method to simulate level and width fluctuations but is restricted in its initial level population algorithm. On the other hand, modern reaction codes such as TALYS and EMPIRE populate a wide range of states in the residual nucleus prior to γ-ray decay, but do not go beyond the usemore » of deterministic functions and therefore neglect cascade fluctuations. This combination of capabilities allows RAINIER to be used to determine quasi-continuum properties through comparison with experimental data. Finally, several examples are given that demonstrate how cascade fluctuations influence experimental high-resolution γ-ray spectra from reactions that populate a wide range of initial states.« less
RAINIER: A simulation tool for distributions of excited nuclear states and cascade fluctuations
DOE Office of Scientific and Technical Information (OSTI.GOV)
Kirsch, L. E.; Bernstein, L. A.
In this paper, a new code has been developed named RAINIER that simulates the γ-ray decay of discrete and quasi-continuum nuclear levels for a user-specified range of energy, angular momentum, and parity including a realistic treatment of level spacing and transition width fluctuations. A similar program, DICEBOX, uses the Monte Carlo method to simulate level and width fluctuations but is restricted in its initial level population algorithm. On the other hand, modern reaction codes such as TALYS and EMPIRE populate a wide range of states in the residual nucleus prior to γ-ray decay, but do not go beyond the usemore » of deterministic functions and therefore neglect cascade fluctuations. This combination of capabilities allows RAINIER to be used to determine quasi-continuum properties through comparison with experimental data. Finally, several examples are given that demonstrate how cascade fluctuations influence experimental high-resolution γ-ray spectra from reactions that populate a wide range of initial states.« less
Preliminary Tritium Management Design Activities at ORNL
DOE Office of Scientific and Technical Information (OSTI.GOV)
Harrison, Thomas J.; Felde, David K.; Logsdon, Randall J.
2016-09-01
Interest in salt-cooled and salt-fueled reactors has increased over the last decade (Forsberg et al. 2016). Several private companies and universities in the United States, as well as governments in other countries, are developing salt reactor designs and/or technology. Two primary issues for the development and deployment of many salt reactor concepts are (1) the prevention of tritium generation and (2) the management of tritium to prevent release to the environment. In 2016, the US Department of Energy (DOE) initiated a research project under the Advanced Reactor Technology Program to (1) experimentally assess the feasibility of proposed methods for tritiummore » mitigation and (2) to perform an engineering demonstration of the most promising methods. This document describes results from the first year’s efforts to define, design, and build an experimental apparatus to test potential methods for tritium management. These efforts are focused on producing a final design document as the basis for the apparatus and its scheduled completion consistent with available budget and approvals for facility use.« less
Study of the linearity of CABRI experimental ionization chambers during RIA transients
NASA Astrophysics Data System (ADS)
Lecerf, J.; Garnier, Y.; Hudelot, JP.; Duc, B.; Pantera, L.
2018-01-01
CABRI is an experimental pulse reactor operated by CEA at the Cadarache research center and funded by the French Nuclear Safety and Radioprotection Institute (IRSN). For the purpose of the CABRI International Program (CIP), operated and managed by IRSN under an OECD/NEA framework it has been refurbished since 2003 to be able to provide experiments in prototypical PWR conditions (155 bar, 300 °C) in order to study the fuel behavior under Reactivity Initiated Accident (RIA) conditions. This paper first reminds the objectives of the power commissioning tests performed on the CABRI facility. The design and location of the neutron detectors monitoring the core power are also presented. Then it focuses on the different methodologies used to calibrate the detectors and check the consistency and co-linearity of the measurements. Finally, it presents the methods used to check the linearity of the neutron detectors up to the high power levels ( 20 GW) reached during power transients. Some results obtained during the power tests campaign are also presented.
Experimental projects in graduate theoretical physics courses
DOE Office of Scientific and Technical Information (OSTI.GOV)
Rosner, J.L.
1996-10-01
Some beginning graduate courses in physics at the University of Chicago have been taught with final projects in addition to or in place of written final examinations. Although these courses and many of the projects are theoretical, experimental projects have been encouraged, with some success. A few examples are discussed. {copyright} {ital 1996 American Association of Physics Teachers.}
76 FR 1261 - Establishment of the Permanent Certification Program for Health Information Technology
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-07
...This final rule establishes a permanent certification program for the purpose of certifying health information technology (HIT). This final rule is issued pursuant to the authority granted to the National Coordinator for Health Information Technology (the National Coordinator) by section 3001(c)(5) of the Public Health Service Act (PHSA), as added by the Health Information Technology for Economic and Clinical Health (HITECH) Act. The permanent certification program will eventually replace the temporary certification program that was previously established by a final rule. The National Coordinator will use the permanent certification program to authorize organizations to certify electronic health record (EHR) technology, such as Complete EHRs and/or EHR Modules. The permanent certification program could also be expanded to include the certification of other types of HIT.
NASA Technical Reports Server (NTRS)
Simon, Terrence W.; Adolfson, David
2006-01-01
The work to be presented herein was motivated largely by a desire to improve the understanding of oscillatory fluid mechanics inside a Stirling engine. To this end, a CFD project was undertaken at Cleveland State University with the goal of accurately predicting the fluid dynamics within an engine or engine component. Along with the CFD efforts, a code validation project was undertaken at the University of Minnesota. The material covered herein consists of four main parts. In section 1, an experimental investigation of a small aspect ratio impinging jet is discussed. Included in this discussion is a description of the test facilities and instrumentation. A presentation of the collected data is given and comments are made. Next, in section 2, a parallel experimental investigation is presented in which the same geometry as that of section 1 is used, but the flow conditions are changed from steady unidirectional flow to sinusoidally oscillating flow. In section Two, collected data are presented and comments are made. In section 3, a comparison is made between the results of sections 1 and 2, namely, sinusoidally oscillating flow results are compared to steady, unidirectional flow results from the same geometry. Finally, in section 4, a comparison is made between experimentally collected data (the main subject of this work) and CFD generated results. Furthermore, in appendix A, an introductory description of the primary measurement tool used in the experimental process the hot wire anemometer is given for the unfamiliar. The anemometer calibration procedure is described in appendix B. A portfolio of data reduction and data processing codes is provided in appendix C and lastly, a DVD and a roadmap of its contents is provided in an appendix D. 1.0 Unidirectional Flow Investigations 1.1 Introduction This unidirectional experimental program was undertaken to complement an oscillatory flow investigation conducted at the University of Minnesota. The oscillatory investigation is discussed thoroughly in section 2. We defer the description of the motivation behind these experiments until the introduction of section 2. The work that is discussed in this thesis began (chronologically) with oscillatory flow visualization experiments. It was decided that it would be valuable and important to investigate the flow under unidirectional conditions in the same geometry as that of the oscillatory experiments. The thought was that the unidirectional case would be less complicated to model with a CFD program (a moving boundary would be replaced with a steady state boundary condition). Thus, a series of unidirectional experiments were carried out to capture the important features of the flow within the test section. The purpose of these experiments was to provide a data set for comparison to CFD generated velocity fields. Hot-wire anemometry data were taken and flow visualization was conducted as a standard for code validation. The flow geometry was simple, such that it could be easily gridded in a CFD program. However, the geometry provided separation and transition zones, shear layers and recirculation zones. These characteristics made the flow complex and challenging for CFD computation. We comment that the order of experiments that produced this report is as follows: experimental flow visualization under oscillatory flow conditions was carried out; this was followed by unidirectional flow visualization and hot wire anemometry; finally, oscillatory hot wire anemometry was conducted. We present the results out of chronological order for the following reason: the unidirectional results are easier
76 FR 63151 - Small Business Jobs Act: 504 Loan Program Debt Refinancing
Federal Register 2010, 2011, 2012, 2013, 2014
2011-10-12
... SMALL BUSINESS ADMINISTRATION 13 CFR Part 120 RIN 3245-AG17 Small Business Jobs Act: 504 Loan Program Debt Refinancing AGENCY: U.S. Small Business Administration. ACTION: Final rule. SUMMARY: This rule finalizes the interim final rule that implemented section 1122 of the Small Business Jobs Act of...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-23
... DEPARTMENT OF EDUCATION Native Hawaiian Career and Technical Education Program; Final Waiver and.... ACTION: Notice. Overview Information Final Waiver and Extension of Project Period for the Native Hawaiian.... SUMMARY: For 36-month projects funded in fiscal year (FY) 2009 under the Native Hawaiian Career and...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-02-07
... Carolina: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental... authorization of the changes to its hazardous waste program under the Resource Conservation and Recovery Act... authorization during the comment period, the decision to authorize North Carolina's changes to its hazardous...
75 FR 45563 - Terrorism Risk Insurance Program; Final Netting
Federal Register 2010, 2011, 2012, 2013, 2014
2010-08-03
... DEPARTMENT OF THE TREASURY 31 CFR Part 50 RIN 1505-AC24 Terrorism Risk Insurance Program; Final... Title I of the Terrorism Risk Insurance Act of 2002 (``TRIA'' or ``the Act''), as amended by the Terrorism Risk Insurance Extension Act of 2005 (``Extension Act'') and the Terrorism Risk Insurance Program...
40 CFR 123.45 - Noncompliance and program reporting by the Director.
Code of Federal Regulations, 2014 CFR
2014-07-01
... (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS Transfer of Information and Permit Review § 123.45... schedule report for final compliance or a monitoring report. This applies when the permittee has failed to submit a final compliance schedule progress report, pretreatment report, or a Discharge Monitoring Report...
40 CFR 123.45 - Noncompliance and program reporting by the Director.
Code of Federal Regulations, 2012 CFR
2012-07-01
... (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS Transfer of Information and Permit Review § 123.45... schedule report for final compliance or a monitoring report. This applies when the permittee has failed to submit a final compliance schedule progress report, pretreatment report, or a Discharge Monitoring Report...
40 CFR 123.45 - Noncompliance and program reporting by the Director.
Code of Federal Regulations, 2011 CFR
2011-07-01
... (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS Transfer of Information and Permit Review § 123.45... schedule report for final compliance or a monitoring report. This applies when the permittee has failed to submit a final compliance schedule progress report, pretreatment report, or a Discharge Monitoring Report...
40 CFR 123.45 - Noncompliance and program reporting by the Director.
Code of Federal Regulations, 2013 CFR
2013-07-01
... (CONTINUED) WATER PROGRAMS STATE PROGRAM REQUIREMENTS Transfer of Information and Permit Review § 123.45... schedule report for final compliance or a monitoring report. This applies when the permittee has failed to submit a final compliance schedule progress report, pretreatment report, or a Discharge Monitoring Report...
13 CFR 143.25 - Program income.
Code of Federal Regulations, 2010 CFR
2010-01-01
... ending date of the award reflected in the final financial report. (c) Cost of generating program income... copyrighted material, patents, and inventions developed by a grantee or subgrantee is program income only if... date of the final financial report, see paragraph (a) of this section), unless the terms of the...
78 FR 15299 - New York: Final Authorization of State Hazardous Waste Management Program Revision
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-11
... authorization of changes to its hazardous waste program under the Solid Waste Disposal Act, as amended, commonly... Solid Waste Amendments of 1984 (HSWA). New Federal requirements and prohibitions imposed by Federal...: Final Authorization of State Hazardous Waste Management Program Revision AGENCY: Environmental...
75 FR 81187 - South Dakota: Final Authorization of State Hazardous Waste Management Program Revision
Federal Register 2010, 2011, 2012, 2013, 2014
2010-12-27
...: Final Authorization of State Hazardous Waste Management Program Revision AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed Rule. SUMMARY: The Solid Waste Disposal Act, as amended, commonly... Agency (EPA) to authorize states to operate their hazardous waste management programs in lieu of the...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-15
... Administration (HRSA), HHS. ACTION: Interim final rule with request for comments. SUMMARY: The Public Readiness and Emergency Preparedness Act (PREP Act) authorizes the Secretary of Health and Human Services (the Secretary) to establish the Countermeasures Injury Compensation Program (CICP or Program). The Department of...
Children in Hospitals: A Model Program. Final Report.
ERIC Educational Resources Information Center
Brill, Nancy; Cohen, Sarale
This final report describes the rationale, goals and activities of a federally funded project that was designed to develop a model intervention program for hospitalized chronically ill children between birth and five years. The focus of the program was to promote optimal emotional development: attachment, separation, individualization, and…
20 CFR 411.660 - Is SSA's decision final?
Code of Federal Regulations, 2012 CFR
2012-04-01
... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Is SSA's decision final? 411.660 Section 411.660 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Ticket to Work Program Dispute Resolution Disputes Between Employment Networks and Program Managers § 411...
20 CFR 411.660 - Is SSA's decision final?
Code of Federal Regulations, 2010 CFR
2010-04-01
... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Is SSA's decision final? 411.660 Section 411.660 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Ticket to Work Program Dispute Resolution Disputes Between Employment Networks and Program Managers § 411...
20 CFR 411.660 - Is SSA's decision final?
Code of Federal Regulations, 2014 CFR
2014-04-01
... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Is SSA's decision final? 411.660 Section 411.660 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Ticket to Work Program Dispute Resolution Disputes Between Employment Networks and Program Managers § 411...
20 CFR 411.660 - Is SSA's decision final?
Code of Federal Regulations, 2011 CFR
2011-04-01
... 20 Employees' Benefits 2 2011-04-01 2011-04-01 false Is SSA's decision final? 411.660 Section 411.660 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Ticket to Work Program Dispute Resolution Disputes Between Employment Networks and Program Managers § 411...
20 CFR 411.660 - Is SSA's decision final?
Code of Federal Regulations, 2013 CFR
2013-04-01
... 20 Employees' Benefits 2 2013-04-01 2013-04-01 false Is SSA's decision final? 411.660 Section 411.660 Employees' Benefits SOCIAL SECURITY ADMINISTRATION THE TICKET TO WORK AND SELF-SUFFICIENCY PROGRAM Ticket to Work Program Dispute Resolution Disputes Between Employment Networks and Program Managers § 411...
77 FR 53967 - Medicare and Medicaid Programs; Electronic Health Record Incentive Program-Stage 2
Federal Register 2010, 2011, 2012, 2013, 2014
2012-09-04
...This final rule specifies the Stage 2 criteria that eligible professionals (EPs), eligible hospitals, and critical access hospitals (CAHs) must meet in order to qualify for Medicare and/or Medicaid electronic health record (EHR) incentive payments. In addition, it specifies payment adjustments under Medicare for covered professional services and hospital services provided by EPs, eligible hospitals, and CAHs failing to demonstrate meaningful use of certified EHR technology (CEHRT) and other program participation requirements. This final rule revises certain Stage 1 criteria, as finalized in the July 28, 2010 final rule, as well as criteria that apply regardless of Stage.
Southern Regional Center for Lightweight Innovative Design
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wang, Paul T.
The Southern Regional Center for Lightweight Innovative Design (SRCLID) has developed an experimentally validated cradle-to-grave modeling and simulation effort to optimize automotive components in order to decrease weight and cost, yet increase performance and safety in crash scenarios. In summary, the three major objectives of this project are accomplished: To develop experimentally validated cradle-to-grave modeling and simulation tools to optimize automotive and truck components for lightweighting materials (aluminum, steel, and Mg alloys and polymer-based composites) with consideration of uncertainty to decrease weight and cost, yet increase the performance and safety in impact scenarios; To develop multiscale computational models that quantifymore » microstructure-property relations by evaluating various length scales, from the atomic through component levels, for each step of the manufacturing process for vehicles; and To develop an integrated K-12 educational program to educate students on lightweighting designs and impact scenarios. In this final report, we divided the content into two parts: the first part contains the development of building blocks for the project, including materials and process models, process-structure-property (PSP) relationship, and experimental validation capabilities; the second part presents the demonstration task for Mg front-end work associated with USAMP projects.« less
Composition of web services using Markov decision processes and dynamic programming.
Uc-Cetina, Víctor; Moo-Mena, Francisco; Hernandez-Ucan, Rafael
2015-01-01
We propose a Markov decision process model for solving the Web service composition (WSC) problem. Iterative policy evaluation, value iteration, and policy iteration algorithms are used to experimentally validate our approach, with artificial and real data. The experimental results show the reliability of the model and the methods employed, with policy iteration being the best one in terms of the minimum number of iterations needed to estimate an optimal policy, with the highest Quality of Service attributes. Our experimental work shows how the solution of a WSC problem involving a set of 100,000 individual Web services and where a valid composition requiring the selection of 1,000 services from the available set can be computed in the worst case in less than 200 seconds, using an Intel Core i5 computer with 6 GB RAM. Moreover, a real WSC problem involving only 7 individual Web services requires less than 0.08 seconds, using the same computational power. Finally, a comparison with two popular reinforcement learning algorithms, sarsa and Q-learning, shows that these algorithms require one or two orders of magnitude and more time than policy iteration, iterative policy evaluation, and value iteration to handle WSC problems of the same complexity.
NASA Astrophysics Data System (ADS)
Zhang, Jingchuan; Zhang, Wen; Lv, Jianfeng; Liang, Shuo; Wang, Lei; Li, Xiyuan
2018-01-01
To satisfy the application of fiber grating sensor technology in high vacuum thermal environment, FBG on sleeve compactly single model fiber with two typical different kind of connection such as fiber splicing and optical fiber connector are researched. Influence of the different connection to the characteristic of FBG reflectance spectrum in high vacuum thermal environment is analyzed and verified. First, experimental program of influence on FBG reflection spectrum characteristics is designed. Then, a hardware-in-the-loop detection platform is set up. Finally, the influence of temperature and vacuum on the reflection peak power of FBG with two typical different connections under high vacuum thermal environment is studied and verified. Experimental results indicate that: when vacuum varied from normal pressure to 10-4Pa level and then return to normal pressure, temperature of two different single-mode optical fiber connection dropped to -196 °C from room temperature and then returned to room temperature, after 224 hours, the peak power of the FBG reflectance spectrum did not change. It provided the experimental basis for the application of optical fiber sensing technology in high vacuum (pressure about 10-4Pa level) and thermal environment (-196 °C temperature cycle).
McCreath, Heather E; Norris, Keith C; Calderόn, Nancy E; Purnell, Dawn L; Maccalla, Nicole M G; Seeman, Teresa E
2017-01-01
The National Institutes of Health (NIH)-funded Diversity Program Consortium (DPC) includes a Coordination and Evaluation Center (CEC) to conduct a longitudinal evaluation of the two signature, national NIH initiatives - the Building Infrastructure Leading to Diversity (BUILD) and the National Research Mentoring Network (NRMN) programs - designed to promote diversity in the NIH-funded biomedical, behavioral, clinical, and social sciences research workforce. Evaluation is central to understanding the impact of the consortium activities. This article reviews the role and function of the CEC and the collaborative processes and achievements critical to establishing empirical evidence regarding the efficacy of federally-funded, quasi-experimental interventions across multiple sites. The integrated DPC evaluation is particularly significant because it is a collaboratively developed Consortium Wide Evaluation Plan and the first hypothesis-driven, large-scale systemic national longitudinal evaluation of training programs in the history of NIH/National Institute of General Medical Sciences. To guide the longitudinal evaluation, the CEC-led literature review defined key indicators at critical training and career transition points - or Hallmarks of Success. The multidimensional, comprehensive evaluation of the impact of the DPC framed by these Hallmarks is described. This evaluation uses both established and newly developed common measures across sites, and rigorous quasi-experimental designs within novel multi-methods (qualitative and quantitative). The CEC also promotes shared learning among Consortium partners through working groups and provides technical assistance to support high-quality process and outcome evaluation internally of each program. Finally, the CEC is responsible for developing high-impact dissemination channels for best practices to inform peer institutions, NIH, and other key national and international stakeholders. A strong longitudinal evaluation across programs allows the summative assessment of outcomes, an understanding of factors common to interventions that do and do not lead to success, and elucidates the processes developed for data collection and management. This will provide a framework for the assessment of other training programs and have national implications in transforming biomedical research training.
Program to Promote Personal and Social Responsibility in the Secondary Classroom.
Carbonero, Miguel A; Martín-Antón, Luis J; Otero, Lourdes; Monsalvo, Eugenio
2017-01-01
The performance of school children has been studied by considering partial relationships between several personal variables such as the link between cognition and motivation. However, contextual variables, such as a child's willingness to accept social responsibility, also influence students' social and academic performance. Thus, students with greater responsibility have a better attitude toward their studies, resulting in higher academic achievement. This 2-year study aims to reveal to what extent an intervention program affects student performance and is based on the Theory of Positive Action among young people proposed by Don Hellison and the Theory of Reasoned Action by Fishbein and Ajzen. The program focuses on positive influences on social and personal responsibility, taking into consideration parental styles, gender, and academic performance. The program was a part of the educational curricula in participating schools and it targeted four main areas: (a) teaching units using academic texts about social responsibility, (b) student training in mediation processes, (c) teacher training, and (d) family training and involvement. A total of 271 students took part from first and second year of Secondary Education (12-14 years old). The experimental group was made up of 132 students while the remaining 139 formed the control group. All participants completed the Assessment Scale of Social Responsibility Attitudes in Secondary Education and the Parent-Adolescent Communication Scale. Results show that students in the experimental group performed significantly better than those in the control group. Additionally, the issue of social responsibility seems to be related to commitment, self-discipline and perseverance. Regarding gender, males appear to score higher in the factor for well-mannered, friendly and tidy. Finally, a positive relationship has been identified between social responsibility attitudes and parenting with an open communicational style. This paper discusses the results so that schools can include programs aimed at improving social and personal responsibility.
Program to Promote Personal and Social Responsibility in the Secondary Classroom
Carbonero, Miguel A.; Martín-Antón, Luis J.; Otero, Lourdes; Monsalvo, Eugenio
2017-01-01
The performance of school children has been studied by considering partial relationships between several personal variables such as the link between cognition and motivation. However, contextual variables, such as a child’s willingness to accept social responsibility, also influence students’ social and academic performance. Thus, students with greater responsibility have a better attitude toward their studies, resulting in higher academic achievement. This 2-year study aims to reveal to what extent an intervention program affects student performance and is based on the Theory of Positive Action among young people proposed by Don Hellison and the Theory of Reasoned Action by Fishbein and Ajzen. The program focuses on positive influences on social and personal responsibility, taking into consideration parental styles, gender, and academic performance. The program was a part of the educational curricula in participating schools and it targeted four main areas: (a) teaching units using academic texts about social responsibility, (b) student training in mediation processes, (c) teacher training, and (d) family training and involvement. A total of 271 students took part from first and second year of Secondary Education (12–14 years old). The experimental group was made up of 132 students while the remaining 139 formed the control group. All participants completed the Assessment Scale of Social Responsibility Attitudes in Secondary Education and the Parent–Adolescent Communication Scale. Results show that students in the experimental group performed significantly better than those in the control group. Additionally, the issue of social responsibility seems to be related to commitment, self-discipline and perseverance. Regarding gender, males appear to score higher in the factor for well-mannered, friendly and tidy. Finally, a positive relationship has been identified between social responsibility attitudes and parenting with an open communicational style. This paper discusses the results so that schools can include programs aimed at improving social and personal responsibility. PMID:28588529
tweezercalib 2.0: Faster version of MatLab package for precise calibration of optical tweezers
NASA Astrophysics Data System (ADS)
Hansen, Poul Martin; Tolić-Nørrelykke, Iva Marija; Flyvbjerg, Henrik; Berg-Sørensen, Kirstine
2006-03-01
We present a vectorized version of the MatLab (MathWorks Inc.) package tweezercalib for calibration of optical tweezers with precision. The calibration is based on the power spectrum of the Brownian motion of a dielectric bead trapped in the tweezers. Precision is achieved by accounting for a number of factors that affect this power spectrum, as described in vs. 1 of the package [I.M. Tolić-Nørrelykke, K. Berg-Sørensen, H. Flyvbjerg, Matlab program for precision calibration of optical tweezers, Comput. Phys. Comm. 159 (2004) 225-240]. The graphical user interface allows the user to include or leave out each of these factors. Several "health tests" are applied to the experimental data during calibration, and test results are displayed graphically. Thus, the user can easily see whether the data comply with the theory used for their interpretation. Final calibration results are given with statistical errors and covariance matrix. New version program summaryTitle of program: tweezercalib Catalogue identifier: ADTV_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADTV_v2_0 Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Reference in CPC to previous version: I.M. Tolić-Nørrelykke, K. Berg-Sørensen, H. Flyvbjerg, Comput. Phys. Comm. 159 (2004) 225 Catalogue identifier of previous version: ADTV Does the new version supersede the original program: Yes Computer for which the program is designed and others on which it has been tested: General computer running MatLab (Mathworks Inc.) Operating systems under with the program has been tested: Windows2000, Windows-XP, Linux Programming language used: MatLab (Mathworks Inc.), standard license Memory required to execute with typical data: Of order four times the size of the data file High speed storage required: none No. of lines in distributed program, including test data, etc.: 135 989 No. of bytes in distributed program, including test data, etc.: 1 527 611 Distribution format: tar. gz Nature of physical problem: Calibrate optical tweezers with precision by fitting theory to experimental power spectrum of position of bead doing Brownian motion in incompressible fluid, possibly near microscope cover slip, while trapped in optical tweezers. Thereby determine spring constant of optical trap and conversion factor for arbitrary-units-to-nanometers for detection system. Method of solution: Elimination of cross-talk between quadrant photo-diode's output channels for positions (optional). Check that distribution of recorded positions agrees with Boltzmann distribution of bead in harmonic trap. Data compression and noise reduction by blocking method applied to power spectrum. Full accounting for hydrodynamic effects: Frequency-dependent drag force and interaction with nearby cover slip (optional). Full accounting for electronic filters (optional), for "virtual filtering" caused by detection system (optional). Full accounting for aliasing caused by finite sampling rate (optional). Standard non-linear least-squares fitting. Statistical support for fit is given, with several plots facilitating inspection of consistency and quality of data and fit. Summary of revisions: A faster fitting routine, adapted from [J. Nocedal, Y.x. Yuan, Combining trust region and line search techniques, Technical Report OTC 98/04, Optimization Technology Center, 1998; W.H. Press, B.P. Flannery, S.A. Teukolsky, W.T. Vetterling, Numerical Recipes. The Art of Scientific Computing, Cambridge University Press, Cambridge, 1986], is applied. It uses fewer function evaluations, and the remaining function evaluations have been vectorized. Calls to routines in Toolboxes not included with a standard MatLab license have been replaced by calls to routines that are included in the present package. Fitting parameters are rescaled to ensure that they are all of roughly the same size (of order 1) while being fitted. Generally, the program package has been updated to comply with MatLab, vs. 7.0, and optimized for speed. Restrictions on the complexity of the problem: Data should be positions of bead doing Brownian motion while held by optical tweezers. For high precision in final results, data should be time series measured over a long time, with sufficiently high experimental sampling rate: The sampling rate should be well above the characteristic frequency of the trap, the so-called corner frequency. Thus, the sampling frequency should typically be larger than 10 kHz. The Fast Fourier Transform used works optimally when the time series contain 2 data points, and long measurement time is obtained with n>12-15. Finally, the optics should be set to ensure a harmonic trapping potential in the range of positions visited by the bead. The fitting procedure checks for harmonic potential. Typical running time: Seconds Unusual features of the program: None References: The theoretical underpinnings for the procedure are found in [K. Berg-Sørensen, H. Flyvbjerg, Power spectrum analysis for optical tweezers, Rev. Sci. Ins. 75 (2004) 594-612].
Nuclear Test-Experimental Science: Annual report, fiscal year 1988
DOE Office of Scientific and Technical Information (OSTI.GOV)
Struble, G.L.; Donohue, M.L.; Bucciarelli, G.
1988-01-01
Fiscal year 1988 has been a significant, rewarding, and exciting period for Lawrence Livermore National Laboratory's nuclear testing program. It was significant in that the Laboratory's new director chose to focus strongly on the program's activities and to commit to a revitalized emphasis on testing and the experimental science that underlies it. It was rewarding in that revolutionary new measurement techniques were fielded on recent important and highly complicated underground nuclear tests with truly incredible results. And it was exciting in that the sophisticated and fundamental problems of weapons science that are now being addressed experimentally are yielding new challengesmore » and understanding in ways that stimulate and reward the brightest and best of scientists. During FY88 the program was reorganized to emphasize our commitment to experimental science. The name of the program was changed to reflect this commitment, becoming the Nuclear Test-Experimental Science (NTES) Program.« less
Chronic beryllium disease prevention program; worker safety and health program. Final rule.
2006-02-09
The Department of Energy (DOE) is today publishing a final rule to implement the statutory mandate of section 3173 of the Bob Stump National Defense Authorization Act (NDAA) for Fiscal Year 2003 to establish worker safety and health regulations to govern contractor activities at DOE sites. This program codifies and enhances the worker protection program in operation when the NDAA was enacted.
ERIC Educational Resources Information Center
Terry, David R.; Evans, Rupert N.
The document is the final report of a project to develop a suitable method for studying the task content of accredited dental auxiliary education programs and the relationship between the tasks taught in such programs and the tasks involved in a professional situation. The set of instruments developed and pilot tested in 63 programs was used to…
ERIC Educational Resources Information Center
National Archives and Records Administration, 2015
2015-01-01
The Assistant Secretary for Elementary and Secondary Education adopts final requirements for the School Improvement Grants (SIG) program, authorized under section 1003(g) of title I of the Elementary and Secondary Education Act of 1965, as amended (ESEA). These final requirements make changes to the current SIG program requirements and implement…
ERIC Educational Resources Information Center
Lin, Yu-Tzu; Wu, Cheng-Chih; Chiu, Chiung-Fang
2018-01-01
This article explores the feasibility of employing cooperative program editing tools in teaching programming. A quasi-experimental study was conducted, in which the experimental group co-edited the programs with peers using the wiki. The control group co-edited the programs with peers using only the face-to-face approach. The findings show that…
47 CFR 5.305 - Program license not permitted.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 47 Telecommunication 1 2013-10-01 2013-10-01 false Program license not permitted. 5.305 Section 5.305 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL EXPERIMENTAL RADIO SERVICE Program Experimental Radio Licenses § 5.305 Program license not permitted. Experiments are not permitted under this...
47 CFR 5.305 - Program license not permitted.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 47 Telecommunication 1 2014-10-01 2014-10-01 false Program license not permitted. 5.305 Section 5.305 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL EXPERIMENTAL RADIO SERVICE Program Experimental Radio Licenses § 5.305 Program license not permitted. Experiments are not permitted under this...
2012-09-04
With this final rule, the Secretary of Health and Human Services adopts certification criteria that establish the technical capabilities and specify the related standards and implementation specifications that Certified Electronic Health Record (EHR) Technology will need to include to, at a minimum, support the achievement of meaningful use by eligible professionals, eligible hospitals, and critical access hospitals under the Medicare and Medicaid EHR Incentive Programs beginning with the EHR reporting periods in fiscal year and calendar year 2014. This final rule also makes changes to the permanent certification program for health information technology, including changing the program's name to the ONC HIT Certification Program.
Moreno, M Perla; Moreno, Alberto; García-González, Luis; Ureña, Aurelio; Hernández, César; Del Villar, Fernando
2016-06-01
This study applied an intervention program, based on video feedback and questioning, to expert female volleyball players to improve their tactical knowledge. The sample consisted of eight female attackers (26 ± 2.6 years old) from the Spanish National Volleyball Team, who were divided into an experimental group (n = 4) and a control group (n = 4). The video feedback and questioning program applied in the study was developed over eight reflective sessions and consisted of three phases: viewing of the selected actions, self-analysis and reflection by the attacker, and joint player-coach analysis. The attackers were videotaped in an actual game and four clips (situations) of each of the attackers were chosen for each reflective session. Two of the clips showed a correct action by the attacker, and two showed an incorrect decision. Tactical knowledge was measured by problem representation with a verbal protocol. The members of the experimental group showed adaptations in long-term memory, significantly improving their tactical knowledge. With respect to conceptual content, there was an increase in the total number of conditions verbalized by the players; with respect to conceptual sophistication, there was an increase in the indication of appropriate conditions with two or more details; and finally, with respect to conceptual structure, there was an increase in the use of double or triple conceptual structures. The intervention program, based on video feedback and questioning, in addition to on-court training sessions of expert volleyball players, appears to improve the athletes' tactical knowledge. © The Author(s) 2016.
Bottini, Silvia; Hamouda-Tekaya, Nedra; Tanasa, Bogdan; Zaragosi, Laure-Emmanuelle; Grandjean, Valerie; Repetto, Emanuela; Trabucchi, Michele
2017-05-19
Experimental evidence indicates that about 60% of miRNA-binding activity does not follow the canonical rule about the seed matching between miRNA and target mRNAs, but rather a non-canonical miRNA targeting activity outside the seed or with a seed-like motifs. Here, we propose a new unbiased method to identify canonical and non-canonical miRNA-binding sites from peaks identified by Ago2 Cross-Linked ImmunoPrecipitation associated to high-throughput sequencing (CLIP-seq). Since the quality of peaks is of pivotal importance for the final output of the proposed method, we provide a comprehensive benchmarking of four peak detection programs, namely CIMS, PIPE-CLIP, Piranha and Pyicoclip, on four publicly available Ago2-HITS-CLIP datasets and one unpublished in-house Ago2-dataset in stem cells. We measured the sensitivity, the specificity and the position accuracy toward miRNA binding sites identification, and the agreement with TargetScan. Secondly, we developed a new pipeline, called miRBShunter, to identify canonical and non-canonical miRNA-binding sites based on de novo motif identification from Ago2 peaks and prediction of miRNA::RNA heteroduplexes. miRBShunter was tested and experimentally validated on the in-house Ago2-dataset and on an Ago2-PAR-CLIP dataset in human stem cells. Overall, we provide guidelines to choose a suitable peak detection program and a new method for miRNA-target identification. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.
Bottini, Silvia; Hamouda-Tekaya, Nedra; Tanasa, Bogdan; Zaragosi, Laure-Emmanuelle; Grandjean, Valerie; Repetto, Emanuela
2017-01-01
Abstract Experimental evidence indicates that about 60% of miRNA-binding activity does not follow the canonical rule about the seed matching between miRNA and target mRNAs, but rather a non-canonical miRNA targeting activity outside the seed or with a seed-like motifs. Here, we propose a new unbiased method to identify canonical and non-canonical miRNA-binding sites from peaks identified by Ago2 Cross-Linked ImmunoPrecipitation associated to high-throughput sequencing (CLIP-seq). Since the quality of peaks is of pivotal importance for the final output of the proposed method, we provide a comprehensive benchmarking of four peak detection programs, namely CIMS, PIPE-CLIP, Piranha and Pyicoclip, on four publicly available Ago2-HITS-CLIP datasets and one unpublished in-house Ago2-dataset in stem cells. We measured the sensitivity, the specificity and the position accuracy toward miRNA binding sites identification, and the agreement with TargetScan. Secondly, we developed a new pipeline, called miRBShunter, to identify canonical and non-canonical miRNA-binding sites based on de novo motif identification from Ago2 peaks and prediction of miRNA::RNA heteroduplexes. miRBShunter was tested and experimentally validated on the in-house Ago2-dataset and on an Ago2-PAR-CLIP dataset in human stem cells. Overall, we provide guidelines to choose a suitable peak detection program and a new method for miRNA-target identification. PMID:28108660
SSVEP-based Experimental Procedure for Brain-Robot Interaction with Humanoid Robots.
Zhao, Jing; Li, Wei; Mao, Xiaoqian; Li, Mengfan
2015-11-24
Brain-Robot Interaction (BRI), which provides an innovative communication pathway between human and a robotic device via brain signals, is prospective in helping the disabled in their daily lives. The overall goal of our method is to establish an SSVEP-based experimental procedure by integrating multiple software programs, such as OpenViBE, Choregraph, and Central software as well as user developed programs written in C++ and MATLAB, to enable the study of brain-robot interaction with humanoid robots. This is achieved by first placing EEG electrodes on a human subject to measure the brain responses through an EEG data acquisition system. A user interface is used to elicit SSVEP responses and to display video feedback in the closed-loop control experiments. The second step is to record the EEG signals of first-time subjects, to analyze their SSVEP features offline, and to train the classifier for each subject. Next, the Online Signal Processor and the Robot Controller are configured for the online control of a humanoid robot. As the final step, the subject completes three specific closed-loop control experiments within different environments to evaluate the brain-robot interaction performance. The advantage of this approach is its reliability and flexibility because it is developed by integrating multiple software programs. The results show that using this approach, the subject is capable of interacting with the humanoid robot via brain signals. This allows the mind-controlled humanoid robot to perform typical tasks that are popular in robotic research and are helpful in assisting the disabled.
SSVEP-based Experimental Procedure for Brain-Robot Interaction with Humanoid Robots
Zhao, Jing; Li, Wei; Mao, Xiaoqian; Li, Mengfan
2015-01-01
Brain-Robot Interaction (BRI), which provides an innovative communication pathway between human and a robotic device via brain signals, is prospective in helping the disabled in their daily lives. The overall goal of our method is to establish an SSVEP-based experimental procedure by integrating multiple software programs, such as OpenViBE, Choregraph, and Central software as well as user developed programs written in C++ and MATLAB, to enable the study of brain-robot interaction with humanoid robots. This is achieved by first placing EEG electrodes on a human subject to measure the brain responses through an EEG data acquisition system. A user interface is used to elicit SSVEP responses and to display video feedback in the closed-loop control experiments. The second step is to record the EEG signals of first-time subjects, to analyze their SSVEP features offline, and to train the classifier for each subject. Next, the Online Signal Processor and the Robot Controller are configured for the online control of a humanoid robot. As the final step, the subject completes three specific closed-loop control experiments within different environments to evaluate the brain-robot interaction performance. The advantage of this approach is its reliability and flexibility because it is developed by integrating multiple software programs. The results show that using this approach, the subject is capable of interacting with the humanoid robot via brain signals. This allows the mind-controlled humanoid robot to perform typical tasks that are popular in robotic research and are helpful in assisting the disabled. PMID:26650051
Karabourniotis, Dimitrios; Evaggelinou, Christina; Tzetzis, George; Kourtessis, Thomas
2002-06-01
The purpose of this study was to investigate the effect of self-testing activities on the development of fundamental movement skills in first-grade children in Greece. Two groups of children were tested. The Control group (n = 23 children) received the regular 12-wk. physical education school program and the Experimental group (n = 22 children) received a 12-wk. skill-oriented program with an increasing allotment of self-testing activities. The Test of Gross Motor Development was used to assess fundamental movement skills, while the content areas of physical education courses were estimated with an assessment protocol, based on the interval recording system called the Academic Learning Time-Physical Education. A 2 x 2 repeated measures analysis of variance with group as the between factor and testing time (pretest vs posttest) as the repeated-measures factor was performed to assess differences between the two groups. A significant interaction of group with testing time was found for the Test of Gross Motor Development total score, with the Experimental group scoring higher then the Control group. A significant main effect was also found for test but not for group. This study provides evidence supporting the notion that a balanced allotment of the self-testing and game activities beyond the usual curriculum increases the fundamental motor-skill development of children. Also, it stresses the necessity for content and performance standards for the fundamental motor skills in educational programs. Finally, it seems that the Test of Gross Motor Development is a useful tool for the assessment of children's fundamental movement skills.
2006-04-21
This final rule requires that all providers and suppliers (other than physicians or practitioners who have elected to "opt-out" of the Medicare program) complete an enrollment form and submit specific information to us. This final rule also requires that all providers and suppliers periodically update and certify the accuracy of their enrollment information to receive and maintain billing privileges in the Medicare program. In addition, this final rule implements provisions in the statute that require us to ensure that all Medicare providers and suppliers are qualified to provide the appropriate health care services. These statutory provisions include requirements meant to protect beneficiaries and the Medicare Trust Funds by preventing unqualified, fraudulent, or excluded providers and suppliers from providing items or services to Medicare beneficiaries or billing the Medicare program or its beneficiaries.
Sub-Project 7 of Wisconsin 553, Part F, EPDA--Industry/Exchange Program: Final Report.
ERIC Educational Resources Information Center
Wisconsin Univ. - Stout, Menomonie. Center for Vocational, Technical and Adult Education.
The final report describes a study to develop a statewide teacher/industry exchange program in Wisconsin that would provide vocational-technical instructors with occupational experience opportunities. Three plans for implementing the program were developed: (A) swapping the positions of a business or industrial person with that of a vocational…
Exemplary Programs for the Handicapped. Volume I. Final Report.
ERIC Educational Resources Information Center
Freedman, Ruth; And Others
Presented is the final report of a study which assessed the effectiveness of 50 Bureau of Education for the Handicapped programs and selected 17 of the programs as providing exemplary services for handicapped people in the areas of career education, early childhood education, and manpower development. Considered separately are the three phases of…
ERIC Educational Resources Information Center
Lamont, Ann; Fowler, Clifford F.
Two 1980 surveys of school staff, team member interviews, and examination of project films and documents supplied information for final evaluation of the ROCTAPUS (Really Outstanding Color Television About Practically Unlimited Subjects) program, a closed-circuit, magazine format, videotaped, television series intended to enrich the experiential…
76 FR 74076 - Notice of Random Assignment Study To Evaluate the YouthBuild Program; Final Notice
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-30
... Evaluate the YouthBuild Program; Final Notice AGENCY: Employment and Training Administration (ETA), Labor... rigorous, nationally-representative estimates of the net impacts of the YouthBuild program. The Department... study. In the sites randomly selected to participate in this evaluation, all applicants for YouthBuild...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-18
... for a Programmatic Environmental Assessment Implementing a Wind Energy Program at Marine Forces... Wind Energy Program at Marine Forces Reserve (MARFORRES) Facilities Located Across the United States... final notice that the FONSI for the PEA implementing the MARFORRES Wind Energy Program will not have a...
78 FR 75961 - Energy Conservation Program: Test Procedures for Electric Motors
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-13
... Conservation Program: Test Procedures for Electric Motors; Final Rule #0;#0;Federal Register / Vol. 78 , No... CFR Part 431 [Docket No. EERE-2012-BT-TP-0043] RIN 1904-AC89 Energy Conservation Program: Test.... ACTION: Final rule. SUMMARY: The U.S. Department of Energy (DOE) is amending the energy efficiency test...
78 FR 15338 - New York: Final Authorization of State Hazardous Waste Management Program Revisions
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-11
... authorization of changes to its hazardous waste program under the Solid Waste Disposal Act, as amended, commonly... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 271 [EPA-R02-RCRA-2013-0144; FRL-9693-3] New York: Final Authorization of State Hazardous Waste Management Program Revisions AGENCY: Environmental...
Federal Register 2010, 2011, 2012, 2013, 2014
2011-12-28
.... FSIS-2008-0039] RIN 0583-AD37 Cooperative Inspection Programs: Interstate Shipment of Meat and Poultry... to ship meat and poultry products in interstate commerce. The final rule was published in the Federal... the Federal Register, the final rule, ``Cooperative Inspection Programs; Interstate Shipment of Meat...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-05-23
... DEPARTMENT OF EDUCATION Native American Career and Technical Education Program; Final Waivers and... American Career and Technical Education Program Catalog of Federal Domestic Assistance (CFDA) Number: 84.101A. SUMMARY: For 60-month projects funded in fiscal year (FY) 2007 under the Native American Career...
Abeid, Muzdalifat; Muganyizi, Projestine; Mpembeni, Rose; Darj, Elisabeth; Axemo, Pia
2016-01-01
Sexual violence against women and children in Tanzania and globally is a human rights violation and a developmental challenge. The aim of this study was to assess the impact of training health professionals on rape management. The specific objectives were to evaluate the changes of knowledge and attitudes toward sexual violence among a selected population of health professionals at primary health care level. A quasi-experimental design using cross-sectional surveys was conducted to evaluate health care workers' knowledge, attitude, and clinical practice toward sexual violence before and after the training program. The study involved the Kilombero (intervention) and Ulanga (comparison) districts in Morogoro region. A total of 151 health professionals at baseline (2012) and 169 in the final assessment (2014) participated in the survey. Data were collected using the same structured questionnaire. The amount of change in key indicators from baseline to final assessment in the two areas was compared using composite scores in the pre- and post-interventions, and the net intervention effect was calculated by the difference in difference method. Overall, there was improved knowledge in the intervention district from 55% at baseline to 86% and a decreased knowledge from 58.5 to 36.2% in the comparison area with a net effect of 53.7% and a p-value less than 0.0001. The proportion of participants who exhibited an accepting attitude toward violence declined from 15.3 to 11.2% in the intervention area but increased from 13.2 to 20.0% in the comparison area. Training on the management of sexual violence is feasible and the results indicate improvement in healthcare workers' knowledge and practice but not attitudes. Lessons learned from this study for successful replication of such an intervention in similar settings require commitment from those at strategic level within the health service to ensure that adequate resources are made available.
Abeid, Muzdalifat; Muganyizi, Projestine; Mpembeni, Rose; Darj, Elisabeth; Axemo, Pia
2016-01-01
Background Sexual violence against women and children in Tanzania and globally is a human rights violation and a developmental challenge. Objective The aim of this study was to assess the impact of training health professionals on rape management. The specific objectives were to evaluate the changes of knowledge and attitudes toward sexual violence among a selected population of health professionals at primary health care level. Design A quasi-experimental design using cross-sectional surveys was conducted to evaluate health care workers’ knowledge, attitude, and clinical practice toward sexual violence before and after the training program. The study involved the Kilombero (intervention) and Ulanga (comparison) districts in Morogoro region. A total of 151 health professionals at baseline (2012) and 169 in the final assessment (2014) participated in the survey. Data were collected using the same structured questionnaire. The amount of change in key indicators from baseline to final assessment in the two areas was compared using composite scores in the pre- and post-interventions, and the net intervention effect was calculated by the difference in difference method. Results Overall, there was improved knowledge in the intervention district from 55% at baseline to 86% and a decreased knowledge from 58.5 to 36.2% in the comparison area with a net effect of 53.7% and a p-value less than 0.0001. The proportion of participants who exhibited an accepting attitude toward violence declined from 15.3 to 11.2% in the intervention area but increased from 13.2 to 20.0% in the comparison area. Conclusions Training on the management of sexual violence is feasible and the results indicate improvement in healthcare workers’ knowledge and practice but not attitudes. Lessons learned from this study for successful replication of such an intervention in similar settings require commitment from those at strategic level within the health service to ensure that adequate resources are made available. PMID:27435570
NASA Astrophysics Data System (ADS)
Gautam, Girish Dutt; Pandey, Arun Kumar
2018-03-01
Kevlar is the most popular aramid fiber and most commonly used in different technologically advanced industries for various applications. But the precise cutting of Kevlar composite laminates is a difficult task. The conventional cutting methods face various defects such as delamination, burr formation, fiber pullout with poor surface quality and their mechanical performance is greatly affected by these defects. The laser beam machining may be an alternative of the conventional cutting processes due to its non-contact nature, requirement of low specific energy with higher production rate. But this process also faces some problems that may be minimized by operating the machine at optimum parameters levels. This research paper examines the effective utilization of the Nd:YAG laser cutting system on difficult-to-cut Kevlar-29 composite laminates. The objective of the proposed work is to find the optimum process parameters settings for getting the minimum kerf deviations at both sides. The experiments have been conducted on Kevlar-29 composite laminates having thickness 1.25 mm by using Box-Benkhen design with two center points. The experimental data have been used for the optimization by using the proposed methodology. For the optimization, Teaching learning Algorithm based approach has been employed to obtain the minimum kerf deviation at bottom and top sides. A self coded Matlab program has been developed by using the proposed methodology and this program has been used for the optimization. Finally, the confirmation tests have been performed to compare the experimental and optimum results obtained by the proposed methodology. The comparison results show that the machining performance in the laser beam cutting process has been remarkably improved through proposed approach. Finally, the influence of different laser cutting parameters such as lamp current, pulse frequency, pulse width, compressed air pressure and cutting speed on top kerf deviation and bottom kerf deviation during the Nd:YAG laser cutting of Kevlar-29 laminates have been discussed.
EPA Finalizes Voluntary Quality Assurance Plan for Renewable Fuel Standard Program
The rule finalizes a voluntary third-party quality assurance program option for RINs that regulated parties may exercise as a supplement to the “buyer beware” liability as prescribed under existing regulations.
FINAL Progress Report DOE Grant DE-FG02-04ER15587
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mullins, Charles Buddie
Catalysis Program - Viviane Schwartz Program Manager This Final Report discusses several archival journal articles that have been published that present and discuss the results that were discovered through this DOE grant.
Development of guidelines for optimum baghouse fluid-dynamic-system design. Final report
DOE Office of Scientific and Technical Information (OSTI.GOV)
Eskinazi, D.; Gilbert, G.B.
1982-06-01
In recent years, the utility industry has turned to fabric filters as an alternative technology to electrostatic precipitators for particulate emission control from pulverized coal-fired power plants. One aspect of baghouse technology which appears to be of major importance in minimizing the size, cost, and operating pressure drop is the development of ductwork and compartment designs which achieve uniform gas and dust flow distribution to individual compartments and bags within a compartment. The objective of this project was to perform an experimental modeling program to develop design guidelines for optimizing the fluid mechanic performance of baghouses. Tasks included formulation ofmore » the appropriate modeling techniques for analysis of the flow of dust-laden gas through the collector system and extensive experimental analysis of fabric filter duct system design. A matrix of geometric configurations and operating conditions was experimentally investigated to establish the characteristics of an optimum system, to identify the level of fluid mechanic sophistication in current designs, and to experimentally develop new ideas and improved designs. Experimental results indicate that the design of the inlet and outlet manifolds, hopper entrance, hopper region below the tubesheet, and the compartment outlet have not been given sufficient attention. Unsteady flow patterns, poor velocity profiles, recirculation zones, and excessive pressure losses may be associated with these regions. It is evident from the results presented here that the fluid mechanic design of fabric filter systems can be improved significantly.« less
EVALUATION OF EXPERIMENTAL PRESCHOOL PROGRAM FOR EDUCATIONALLY DEPRIVED CHILDREN (1964).
ERIC Educational Resources Information Center
STEWART, LUCILLE M.
THE AIM OF AN EXPERIMENTAL PRESCHOOL PROGRAM FOR EDUCATIONALLY DEPRIVED CHILDREN WAS TO PREPARE THEM FOR REGULAR KINDERGARTEN CLASSES. ACTIVITIES AND EXPERIENCES WERE PROVIDED WHICH HELPED THE CHILDREN EXPRESS THEMSELVES VERBALLY AND BECOME AWARE OF THEIR ENVIRONMENT. THE BUDGET FOR A 6-WEEK PROGRAM, INCLUDING STAFF, PROGRAM SUPPLIES, AND…
Laptop Use, Interactive Science Software, and Science Learning Among At-Risk Students
NASA Astrophysics Data System (ADS)
Zheng, Binbin; Warschauer, Mark; Hwang, Jin Kyoung; Collins, Penelope
2014-08-01
This year-long, quasi-experimental study investigated the impact of the use of netbook computers and interactive science software on fifth-grade students' science learning processes, academic achievement, and interest in further science, technology, engineering, and mathematics (STEM) study within a linguistically diverse school district in California. Analysis of students' state standardized science test scores indicated that the program helped close gaps in scientific achievement between at-risk learners (i.e., English learners, Hispanics, and free/reduced-lunch recipients) and their counterparts. Teacher and student interviews and classroom observations suggested that computer-supported visual representations and interactions supported diverse learners' scientific understanding and inquiry and enabled more individualized and differentiated instruction. Finally, interviews revealed that the program had a positive impact on students' motivation in science and on their interest in pursuing science-related careers. This study suggests that technology-facilitated science instruction is beneficial for improving at-risk students' science achievement, scaffolding students' scientific understanding, and strengthening students' motivation to pursue STEM-related careers.
A subgradient approach for constrained binary optimization via quantum adiabatic evolution
NASA Astrophysics Data System (ADS)
Karimi, Sahar; Ronagh, Pooya
2017-08-01
Outer approximation method has been proposed for solving the Lagrangian dual of a constrained binary quadratic programming problem via quantum adiabatic evolution in the literature. This should be an efficient prescription for solving the Lagrangian dual problem in the presence of an ideally noise-free quantum adiabatic system. However, current implementations of quantum annealing systems demand methods that are efficient at handling possible sources of noise. In this paper, we consider a subgradient method for finding an optimal primal-dual pair for the Lagrangian dual of a constrained binary polynomial programming problem. We then study the quadratic stable set (QSS) problem as a case study. We see that this method applied to the QSS problem can be viewed as an instance-dependent penalty-term approach that avoids large penalty coefficients. Finally, we report our experimental results of using the D-Wave 2X quantum annealer and conclude that our approach helps this quantum processor to succeed more often in solving these problems compared to the usual penalty-term approaches.
Physics through the 1990s: Elementary-particle physics
NASA Astrophysics Data System (ADS)
The volume begins with a non-mathematical discussion of the motivation behind, and basic ideas of, elementary-particle physics theory and experiment. The progress over the past two decades with the quark model and unification of the electromagnetic and weak interactions is reviewed. Existing theoretical problems in the field, such as the origin of mass and the unification of the fundamental forces, are detailed, along with experimental programs to test the new theories. Accelerators, instrumentation, and detectors are described for both current and future facilities. Interactions with other areas of both theoretical and applied physics are presented. The sociology of the field is examined regarding the education of graduate students, the organization necessary in large-scale experiments, and the decision-making process involved in high-cost experiments. Finally, conclusions and recommendations for maintaining US excellence in theory and experiment are given. Appendices list both current and planned accelerators, and present statistical data on the US elementary-particle physics program. A glossary is included.
Magnetic field effects on microwave absorbing materials
NASA Technical Reports Server (NTRS)
Goldberg, Ira; Hollingsworth, Charles S.; Mckinney, Ted M.
1991-01-01
The objective of this program was to gather information to formulate a microwave absorber that can work in the presence of strong constant direct current (DC) magnetic fields. The program was conducted in four steps. The first step was to investigate the electrical and magnetic properties of magnetic and ferrite microwave absorbers in the presence of strong magnetic fields. This included both experimental measurements and a literature survey of properties that may be applicable to finding an appropriate absorbing material. The second step was to identify those material properties that will produce desirable absorptive properties in the presence of intense magnetic fields and determine the range of magnetic field in which the absorbers remain effective. The third step was to establish ferrite absorber designs that will produce low reflection and adequate absorption in the presence of intense inhomogeneous static magnetic fields. The fourth and final step was to prepare and test samples of such magnetic microwave absorbers if such designs seem practical.
Physics through the 1990s: elementary-particle physics
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
1986-01-01
The volume begins with a non-mathematical discussion of the motivation behind, and basic ideas of, elementary-particle physics theory and experiment. The progress over the past two decades with the quark model and unification of the electromagnetic and weak interactions is reviewed. Existing theoretical problems in the field, such as the origin of mass and the unification of the fundamental forces, are detailed, along with experimental programs to test the new theories. Accelerators, instrumentation, and detectors are described for both current and future facilities. Interactions with other areas of both theoretical and applied physics are presented. The sociology of the fieldmore » is examined regarding the education of graduate students, the organization necessary in large-scale experiments, and the decision-making process involved in high-cost experiments. Finally, conclusions and recommendations for maintaining US excellence in theory and experiment are given. Appendices list both current and planned accelerators, and present statistical data on the US elementary-particle physics program. A glossary is included.« less
NASA Astrophysics Data System (ADS)
Zarindast, Atousa; Seyed Hosseini, Seyed Mohamad; Pishvaee, Mir Saman
2017-06-01
Robust supplier selection problem, in a scenario-based approach has been proposed, when the demand and exchange rates are subject to uncertainties. First, a deterministic multi-objective mixed integer linear programming is developed; then, the robust counterpart of the proposed mixed integer linear programming is presented using the recent extension in robust optimization theory. We discuss decision variables, respectively, by a two-stage stochastic planning model, a robust stochastic optimization planning model which integrates worst case scenario in modeling approach and finally by equivalent deterministic planning model. The experimental study is carried out to compare the performances of the three models. Robust model resulted in remarkable cost saving and it illustrated that to cope with such uncertainties, we should consider them in advance in our planning. In our case study different supplier were selected due to this uncertainties and since supplier selection is a strategic decision, it is crucial to consider these uncertainties in planning approach.
Physics through the 1990s: Elementary-particle physics
NASA Technical Reports Server (NTRS)
1986-01-01
The volume begins with a non-mathematical discussion of the motivation behind, and basic ideas of, elementary-particle physics theory and experiment. The progress over the past two decades with the quark model and unification of the electromagnetic and weak interactions is reviewed. Existing theoretical problems in the field, such as the origin of mass and the unification of the fundamental forces, are detailed, along with experimental programs to test the new theories. Accelerators, instrumentation, and detectors are described for both current and future facilities. Interactions with other areas of both theoretical and applied physics are presented. The sociology of the field is examined regarding the education of graduate students, the organization necessary in large-scale experiments, and the decision-making process involved in high-cost experiments. Finally, conclusions and recommendations for maintaining US excellence in theory and experiment are given. Appendices list both current and planned accelerators, and present statistical data on the US elementary-particle physics program. A glossary is included.
A superconducting CW-LINAC for heavy ion acceleration at GSI
NASA Astrophysics Data System (ADS)
Barth, Winfried; Aulenbacher, Kurt; Basten, Markus; Dziuba, Florian; Gettmann, Viktor; Miski-Oglu, Maksym; Podlech, Holger; Yaramyshev, Stepan
2017-03-01
Recently the Universal Linear Accelerator (UNILAC) serves as a powerful high duty factor (25%) heavy ion beam accelerator for the ambitious experiment program at GSI. Beam time availability for SHE (Super Heavy Element)-research will be decreased due to the limitation of the UNILAC providing Uranium beams with an extremely high peak current for FAIR simultaneously. To keep the GSI-SHE program competitive on a high level and even beyond, a standalone superconducting continuous wave (100% duty factor) LINAC in combination with the upgraded GSI High Charge State injector is envisaged. In preparation for this, the first LINAC section (financed by HIM and GSI) will be tested with beam in 2017, demonstrating the future experimental capabilities. Further on the construction of an extended cryo module comprising two shorter Crossbar-H cavities is foreseen to test until end of 2017. As a final R&D step towards an entire LINAC three advanced cryo modules, each comprising two CH cavities, should be built until 2019, serving for first user experiments at the Coulomb barrier.
Adaptive learning and control for MIMO system based on adaptive dynamic programming.
Fu, Jian; He, Haibo; Zhou, Xinmin
2011-07-01
Adaptive dynamic programming (ADP) is a promising research field for design of intelligent controllers, which can both learn on-the-fly and exhibit optimal behavior. Over the past decades, several generations of ADP design have been proposed in the literature, which have demonstrated many successful applications in various benchmarks and industrial applications. While many of the existing researches focus on multiple-inputs-single-output system with steepest descent search, in this paper we investigate a generalized multiple-input-multiple-output (GMIMO) ADP design for online learning and control, which is more applicable to a wide range of practical real-world applications. Furthermore, an improved weight-updating algorithm based on recursive Levenberg-Marquardt methods is presented and embodied in the GMIMO approach to improve its performance. Finally, we test the performance of this approach based on a practical complex system, namely, the learning and control of the tension and height of the looper system in a hot strip mill. Experimental results demonstrate that the proposed approach can achieve effective and robust performance.
What do we mean by Human-Centered Design of Life-Critical Systems?
Boy, Guy A
2012-01-01
Human-centered design is not a new approach to design. Aerospace is a good example of a life-critical systems domain where participatory design was fully integrated, involving experimental test pilots and design engineers as well as many other actors of the aerospace engineering community. This paper provides six topics that are currently part of the requirements of the Ph.D. Program in Human-Centered Design of the Florida Institute of Technology (FIT.) This Human-Centered Design program offers principles, methods and tools that support human-centered sustainable products such as mission or process control environments, cockpits and hospital operating rooms. It supports education and training of design thinkers who are natural leaders, and understand complex relationships among technology, organizations and people. We all need to understand what we want to do with technology, how we should organize ourselves to a better life and finally find out whom we are and have become. Human-centered design is being developed for all these reasons and issues.
DOE Office of Scientific and Technical Information (OSTI.GOV)
SEDLACEK,III, A.J.FINFROCK,C.
As a member of the science-support part of the ITT-lead LISA development program, BNL is tasked with the acquisition of UV Raman spectral fingerprints and associated scattering cross-sections for those chemicals-of-interest to the program's sponsor. In support of this role, the present report contains the first installment of UV Raman spectral fingerprint data on the initial subset of chemicals. Because of the unique nature associated with the acquisition of spectral fingerprints for use in spectral pattern matching algorithms (i.e., CLS, PLS, ANN) great care has been undertaken to maximize the signal-to-noise and to minimize unnecessary spectral subtractions, in an effortmore » to provide the highest quality spectral fingerprints. This report is divided into 4 sections. The first is an Experimental section that outlines how the Raman spectra are performed. This is then followed by a section on Sample Handling. Following this, the spectral fingerprints are presented in the Results section where the data reduction process is outlined. Finally, a Photographs section is included.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Burns, Heather; Flach, Greg; Smith, Frank
2015-01-27
The U.S. Department of Energy Environmental Management (DOE-EM) Office of Tank Waste Management-sponsored Cementitious Barriers Partnership (CBP) is chartered with providing the technical basis for implementing cement-based waste forms and radioactive waste containment structures for long-term disposal. DOE needs in this area include the following to support progress in final treatment and disposal of legacy waste and closure of High-Level Waste (HLW) tanks in the DOE complex: long-term performance predictions, flow sheet development and flow sheet enhancements, and conceptual designs for new disposal facilities. The DOE-EM Cementitious Barriers Partnership is producing software and experimental programs resulting in new methods andmore » data needed for end-users involved with environmental cleanup and waste disposal. Both the modeling tools and the experimental data have already benefited the DOE sites in the areas of performance assessments by increasing confidence backed up with modeling support, leaching methods, and transport properties developed for actual DOE materials. In 2014, the CBP Partnership released the CBP Software Toolbox –“Version 2.0” which provides concrete degradation models for 1) sulfate attack, 2) carbonation, and 3) chloride initiated rebar corrosion, and includes constituent leaching. These models are applicable and can be used by both DOE and the Nuclear Regulatory Commission (NRC) for service life and long-term performance evaluations and predictions of nuclear and radioactive waste containment structures across the DOE complex, including future SRS Saltstone and HLW tank performance assessments and special analyses, Hanford site HLW tank closure projects and other projects in which cementitious barriers are required, the Advanced Simulation Capability for Environmental Management (ASCEM) project which requires source terms from cementitious containment structures as input to their flow simulations, regulatory reviews of DOE performance assessments, and Nuclear Regulatory Commission reviews of commercial nuclear power plant (NPP) structures which are part of the overall US Energy Security program to extend the service life of NPPs. In addition, the CBP experimental programs have had a significant impact on the DOE complex by providing specific data unique to DOE sodium salt wastes at Hanford and SRS which are not readily available in the literature. Two recent experimental programs on cementitious phase characterization and on technetium (Tc) mobility have provided significant conclusions as follows: recent mineralogy characterization discussed in this paper illustrates that sodium salt waste form matrices are somewhat similar to but not the same as those found in blended cement matrices which to date have been used in long-term thermodynamic modeling and contaminant sequestration as a first approximation. Utilizing the CBP generated data in long-term performance predictions provides for a more defensible technical basis in performance evaluations. In addition, recent experimental studies related to technetium mobility indicate that conventional leaching protocols may not be conservative for direct disposal of Tc-containing waste forms in vadose zone environments. These results have the potential to influence the current Hanford supplemental waste treatment flow sheet and disposal conceptual design.« less
Solar energy program evaluation: an introduction
DOE Office of Scientific and Technical Information (OSTI.GOV)
deLeon, P.
The Program Evaluation Methodology provides an overview of the practice and methodology of program evaluation and defines more precisely the evaluation techniques and methodologies that would be most appropriate to government organizations which are actively involved in the research, development, and commercialization of solar energy systems. Formal evaluation cannot be treated as a single methodological approach for assessing a program. There are four basic types of evaluation designs - the pre-experimental design; the quasi-experimental design based on time series; the quasi-experimental design based on comparison groups; and the true experimental design. This report is organized to first introduce the rolemore » and issues of evaluation. This is to provide a set of issues to organize the subsequent sections detailing the national solar energy programs. Then, these two themes are integrated by examining the evaluation strategies and methodologies tailored to fit the particular needs of the various individual solar energy programs. (MCW)« less
78 FR 79654 - Vermont: Proposed Authorization of State Hazardous Waste Management Program Revisions
Federal Register 2010, 2011, 2012, 2013, 2014
2013-12-31
...EPA proposes to grant final authorization to the State of Vermont for changes to its hazardous waste program. In the ``Rules and Regulations'' section of this Federal Register we are authorizing the changes to the Vermont hazardous waste program under the Resource Conservation and Recovery Act (RCRA) as a direct final rule without prior proposed rule. EPA has determined that these changes satisfy all requirements needed to qualify for final authorization. If we receive no adverse comment, we will not take further action on this proposed rule.
2011-11-30
This final rule with comment period revises the Medicare hospital outpatient prospective payment system (OPPS) for CY 2012 to implement applicable statutory requirements and changes arising from our continuing experience with this system. In this final rule with comment period, we describe the changes to the amounts and factors used to determine the payment rates for Medicare hospital outpatient services paid under the OPPS. In addition, this final rule with comment period updates the revised Medicare ambulatory surgical center (ASC) payment system to implement applicable statutory requirements and changes arising from our continuing experience with this system. In this final rule with comment period, we set forth the relative payment weights and payment amounts for services furnished in ASCs, specific HCPCS codes to which these changes apply, and other ratesetting information for the CY 2012 ASC payment system. We are revising the requirements for the Hospital Outpatient Quality Reporting (OQR) Program, adding new requirements for ASC Quality Reporting System, and making additional changes to provisions of the Hospital Inpatient Value-Based Purchasing (VBP) Program. We also are allowing eligible hospitals and CAHs participating in the Medicare Electronic Health Record (EHR) Incentive Program to meet the clinical quality measure reporting requirement of the EHR Incentive Program for payment year 2012 by participating in the 2012 Medicare EHR Incentive Program Electronic Reporting Pilot. Finally, we are making changes to the rules governing the whole hospital and rural provider exceptions to the physician self-referral prohibition for expansion of facility capacity and changes to provider agreement regulations on patient notification requirements.
Mars Science Laboratory Entry Capsule Aerothermodynamics and Thermal Protection System
NASA Technical Reports Server (NTRS)
Edquist, Karl T.; Hollis, Brian R.; Dyakonov, Artem A.; Laub, Bernard; Wright, Michael J.; Rivellini, Tomasso P.; Slimko, Eric M.; Willcockson, William H.
2007-01-01
The Mars Science Laboratory (MSL) spacecraft is being designed to carry a large rover (greater than 800 kg) to the surface of Mars using a blunt-body entry capsule as the primary decelerator. The spacecraft is being designed for launch in 2009 and arrival at Mars in 2010. The combination of large mass and diameter with non-zero angle-of-attack for MSL will result in unprecedented convective heating environments caused by turbulence prior to peak heating. Navier-Stokes computations predict a large turbulent heating augmentation for which there are no supporting flight data1 and little ground data for validation. Consequently, an extensive experimental program has been established specifically for MSL to understand the level of turbulent augmentation expected in flight. The experimental data support the prediction of turbulent transition and have also uncovered phenomena that cannot be replicated with available computational methods. The result is that the flight aeroheating environments predictions must include larger uncertainties than are typically used for a Mars entry capsule. Finally, the thermal protection system (TPS) being used for MSL has not been flown at the heat flux, pressure, and shear stress combinations expected in flight, so a test program has been established to obtain conditions relevant to flight. This paper summarizes the aerothermodynamic definition analysis and TPS development, focusing on the challenges that are unique to MSL.
Essay: Robert H. Siemann As Leader of the Advanced Accelerator Research Department
DOE Office of Scientific and Technical Information (OSTI.GOV)
Colby, Eric R.; Hogan, Mark J.; /SLAC
Robert H. Siemann originally conceived of the Advanced Accelerator Research Department (AARD) as an academic, experimental group dedicated to probing the technical limitations of accelerators while providing excellent educational opportunities for young scientists. The early years of the Accelerator Research Department B, as it was then known, were dedicated to a wealth of mostly student-led experiments to examine the promise of advanced accelerator techniques. High-gradient techniques including millimeter-wave rf acceleration, beam-driven plasma acceleration, and direct laser acceleration were pursued, including tests of materials under rf pulsed heating and short-pulse laser radiation, to establish the ultimate limitations on gradient. As themore » department and program grew, so did the motivation to found an accelerator research center that brought experimentalists together in a test facility environment to conduct a broad range of experiments. The Final Focus Test Beam and later the Next Linear Collider Test Accelerator provided unique experimental facilities for AARD staff and collaborators to carry out advanced accelerator experiments. Throughout the evolution of this dynamic program, Bob maintained a department atmosphere and culture more reminiscent of a university research group than a national laboratory department. His exceptional ability to balance multiple roles as scientist, professor, and administrator enabled the creation and preservation of an environment that fostered technical innovation and scholarship.« less
Leadership Program in the Care of Infants and Toddlers: A Training Model. Final Report.
ERIC Educational Resources Information Center
Shigaki, Irene S.; Zorn, Vera
New York University's Leadership Program in the Care of Infants and Toddlers, an interdisciplinary training model, is described in this final report covering the program's three-year grant period from the National Institute of Mental Health. Focusing primarily on training individuals for leadership positions in the area of infant and toddler care,…
[Evaluation of an education program for patients with asthma who use inhalers].
Lee, Jong Kyung; Yang, Young Hee
2010-04-01
This study was done to evaluate the effectiveness of an education program for patients with asthma who use inhalers. The research design for this study was a non-equivalent control group quasi-experimental study. Participants in this study were 36 patients for the control group, and 43 patients for the experimental group. The experimental group participated in the education program. The control group received the usual care. Data were collected before and 1 month and 2 months after the program finished and were analyzed using the SPSS 12.0 program. The experimental group had significantly higher scores of knowledge of inhalers, and inhalation technique compared to the control group. However, no significant differences were found between two groups for PEFR, asthma instability, and satisfaction with inhalers. According to the results, the education program was effective in improving knowledge of inhalers, and inhalation technique. Therefore, it is recommended that this education program be used in clinical practice as an effective nursing intervention for patients with asthma on inhalers.
2011 Standards for the Renewable Fuel Standard Program: Final Rulemaking
EPA is finalizing the volume requirements and associated percentage standards that will apply under the RFS2 program in calendar year 2011 for cellulosic biofuel, biomass-based diesel, advanced biofuel, and total renewable fuel.
Federal Employees Health Benefits Program: members of Congress and Congressional staff. Final rule.
2013-10-02
The U.S. Office of Personnel Management (OPM) is issuing a final rule to amend the Federal Employees Health Benefits (FEHB) Program regulations regarding coverage for Members of Congress and congressional staff.
User's guide to four-body and three-body trajectory optimization programs
NASA Technical Reports Server (NTRS)
Pu, C. L.; Edelbaum, T. N.
1974-01-01
A collection of computer programs and subroutines written in FORTRAN to calculate 4-body (sun-earth-moon-space) and 3-body (earth-moon-space) optimal trajectories is presented. The programs incorporate a variable step integration technique and a quadrature formula to correct single step errors. The programs provide capability to solve initial value problem, two point boundary value problem of a transfer from a given initial position to a given final position in fixed time, optimal 2-impulse transfer from an earth parking orbit of given inclination to a given final position and velocity in fixed time and optimal 3-impulse transfer from a given position to a given final position and velocity in fixed time.
ERIC Educational Resources Information Center
Heidema, Clare; Schweitzer, Janis
This guide represents the final experimental version of a pilot project conducted in the United States between 1973 and 1976. The ideas and manner of presentation are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and models of our numeration system (the…
ERIC Educational Resources Information Center
Heidema, Clare; Schweitzer, Janis
This guide represents the final experimental version of a pilot project conducted in the United States between 1973 and 1976. The ideas and manner of presentation are based on the works of Georges and Frederique Papy. They are recognized as having introduced colored arrow drawings ("papygrams") and models of our numeration system (the…
2017-03-30
experimental evaluations for hosting DDDAS-like applications in public cloud infrastructures . Finally, we report on ongoing work towards using the DDDAS...developed and their experimental evaluations for hosting DDDAS-like applications in public cloud infrastructures . Finally, we report on ongoing work towards...Dynamic resource management, model learning, simulation-based optimizations, cloud infrastructures for DDDAS applications. I. INTRODUCTION Critical cyber