Technique and interpretation in tree seed radiography

Treesearch

Howard B. Kriebel

1966-01-01

The study of internal seed structure by radiography requires techniques which will give good definition. To establish the best procedures, we conducted a series of experiments in which we manipulated the principal controllable variables affecting the quality of X-radiographs: namely, focus-to-film distance, film speed (grain), exposure time, kilovoltage, and...

Nano-metal oxides: Exposure and engineering control assessment.

PubMed

Garcia, Alberto; Eastlake, Adrienne; Topmiller, Jennifer L; Sparks, Christopher; Martinez, Kenneth; Geraci, Charles L

2017-09-01

In January 2007, the National Institute for Occupational Safety and Health (NIOSH) conducted a field study to evaluate process specific emissions during the production of ENMs. This study was performed using the nanoparticle emission assessment technique (NEAT). During this study, it was determined that ENMs were released during production and cleaning of the process reactor. Airborne concentrations of silver, nickel, and iron were found both in the employee's personal breathing zone and area samples during reactor cleaning. At the completion of this initial survey, it was suggested that a flanged attachment be added to the local exhaust ventilation system.  NIOSH re-evaluated the facility in December 2011 to assess worker exposures following an increase in production rates. This study included a fully comprehensive emissions, exposure, and engineering control evaluation of the entire process. This study made use of the nanoparticle exposure assessment technique (NEAT 2.0). Data obtained from filter-based samples and direct reading instruments indicate that reactor cleanout increased the overall particle concentration in the immediate area. However, it does not appear that these concentrations affect areas outside of the production floor. As the distance between the reactor and the sample location increased, the observed particle number concentration decreased, creating a concentration gradient with respect to the reactor. The results of this study confirm that the flanged attachment on the local exhaust ventilation system served to decrease exposure potential.  Given the available toxicological data of the metals evaluated, caution is warranted. One should always keep in mind that occupational exposure levels were not developed specifically for nanoscale particles. With data suggesting that certain nanoparticles may be more toxic than the larger counterparts of the same material; employers should attempt to control emissions of these particles at the source, to limit the potential for exposure.

Anti-vibration gloves?

PubMed

Hewitt, Sue; Dong, Ren G; Welcome, Daniel E; McDowell, Thomas W

2015-03-01

For exposure to hand-transmitted vibration (HTV), personal protective equipment is sold in the form of anti-vibration (AV) gloves, but it remains unclear how much these gloves actually reduce vibration exposure or prevent the development of hand-arm vibration syndrome in the workplace. This commentary describes some of the issues that surround the classification of AV gloves, the assessment of their effectiveness and their applicability in the workplace. The available information shows that AV gloves are unreliable as devices for controlling HTV exposures. Other means of vibration control, such as using alternative production techniques, low-vibration machinery, routine preventative maintenance regimes, and controlling exposure durations are far more likely to deliver effective vibration reductions and should be implemented. Furthermore, AV gloves may introduce some adverse effects such as increasing grip force and reducing manual dexterity. Therefore, one should balance the benefits of AV gloves and their potential adverse effects if their use is considered. © Crown copyright 2014.

Potential Surgical Exposure of the Parapharyngeal Internal Carotid Artery by Endonasal, Transoral, and Transcervical Approaches.

PubMed

Tanjararak, Kangsadarn; Upadhyay, Smita; Thiensri, Thanakorn; Muto, Jun; Roongpuvapaht, Boonsam; Prevedello, Daniel M; Carrau, Ricardo L

2018-06-01

Objectives  Endoscopic and endoscopic-assisted approaches to the parapharyngeal space have been reported; however, their potential for vascular exposure has not been previously assessed. This study aims to compare the potential exposure and control of the parapharyngeal internal carotid artery (ppICA) via various approaches. Design and Main Outcome Measures  Ten cadaveric specimens were dissected bilaterally, exposing the ppICA via endonasal, transoral, and transcervical approaches. Length of the exposed vessel and potential control were assessed (feasibility and time required to place an encircling suture). Results  Endoscopic transoral and transcervical-transmandibular approaches expose a significantly longer segment of the ppICA (6.89 and 7.09 cm) than the transoral and endonasal approaches. Vascular control was achieved via endoscopic-endonasal, endoscopic-transoral, and open techniques in 121.6, 64.8, and 5.2 seconds, respectively. Conclusion  Histopathology, goals of surgery, and familiarity of the surgeon with each technique may ultimately determine the choice of approach; however, this study suggests that exposure of the ppICA by endoscopic-assisted transoral approach is comparable to that of a transcervical-transmandibular approach. Vascular control was feasible under elective circumstances. However, the difficulty varied widely, potentially reflecting the challenges of controlling an injured ppICA. However, one must note that active bleeding obscures the surgical field in ways that may impair ppICA control. Furthermore, the results may not reflect clinical scenarios where tumor distorts the surgical field. Nonetheless, the study suggests that, in properly selected patients, the endoscopic-assisted transoral approach avoids problems associated with unsightly scars, mandibular osteotomy, and facial nerve manipulation, whereas, the transcervical-transmandibular approach offers the swiftest vascular control.

Randomized Control Trial of a CBT Trauma Recovery Program in Palestinian Schools

ERIC Educational Resources Information Center

Barron, Ian G.; Abdallah, Ghassan; Smith, Patrick

2013-01-01

The current study aimed to assess the Teaching Recovery Techniques (TRT) trauma recovery program within the context of ongoing violence. Utilizing a randomized controlled trial, 11-14-year-old students in Nablus, Palestine, were allocated by class to intervention or wait-list control conditions. Standardized measures assessed trauma exposure,…

The use of FT-IR reflection-absorbance spectroscopy to study photochemical degradation of polymeric coatings on mirrors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Webb, J.D.; Chughtai, A.R.; Czanderna, A.W.

1981-10-01

A technique is presented for in situ study of degradative changes in polymeric coatings on metallic substrates. The technique uses a controlled environment chamber in conjunction with a Fourier-transform infrared (FT-IR) spectrophotometer. The chamber design permits collection of IR reflection-absorbance spectra from a sample undergoing exposure to controlled ultraviolet (UV) radiation, gas mixtures, and temperatures. Initial data presented confirm the ability of the technique to provide information regarding the bulk photochemistry of bisphenol-A polycarbonate coatings on gold and aluminum substrates. Refinements of this technique should allow a detailed kinetic study of degradative reactions at the polymer/metal interface.

Use of FT-IR reflection-absorbance spectroscopy to study photochemical degradation of polymeric coatings on mirrors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Webb, J D; Schissel, P; Czanderna, A W

1981-01-01

A technique is presented for in situ study of degradative changes in polymeric coatings on metallic substrates. The technique uses a controlled environment chamber in conjunction with a Fourier-transform infrared (FT-IR) spectrophotometer. The chamber design permits collection of IR reflection-absorbance spectra from a sample undergoing exposure to controlled ultraviolet (uv) radiation, gas mixtures, and temperatures. Initial data presented confirm the ability of the technique to provide information regarding the bulk photochemistry of bisphenol-A polycarbonate coatings on gold and aluminum substrates. Refinements of this technique should allow a detailed kinetic study of degradative reactions at the polymer/metal interface.

Development and application of non-invasive biomarkers for carcinogen-DNA adduct analysis in occupationally exposed populations.

PubMed

Talaska, G; Cudnik, J; Jaeger, M; Rothman, N; Hayes, R; Bhatnagar, V J; Kayshup, S J

1996-07-17

Biological monitoring of exposures to carcinogenic compounds in the workplace can be a valuable adjunct to environmental sampling and occupational medicine. Carcinogen-DNA adduct analysis has promise as a biomarker of effective dose if target organ samples can be obtained non-invasively. We have developed non-invasive techniques using exfoliated urothelial and bronchial cells collected in urine and sputum, respectively. First morning urine samples were collected from 33 workers exposed to benzidine or benzidine-based dyes and controls matched for age, education, and smoking status. Sufficient DNA for 32P-postlabelling analysis was obtained from every sample. Mean levels of a specific DNA adduct (which co-chromatographed with standard characterized by MS) were elevated significantly in the benzidine-exposed workers relative to controls. In addition, workers exposed to benzidine had higher adduct levels than those exposed to benzidine-based dyes. This study demonstrates the usefulness of these non-invasive techniques for exposure/effect assessment. To be useful in occupational studies, biomarkers must also be sensitive to exposure interventions. We have conducted topical application studies of used gasoline engine oils in mice and found that the levels of carcinogen-DNA adducts in skin and lung can be significantly lowered if skin cleaning is conducted in a timely manner. The combination of useful, non-invasive techniques to monitor exposure and effect and industrial hygiene interventions can be used to detect and prevent exposures to a wide range of carcinogens including those found in used gasoline engine oils and jet exhausts.

Seeing Green: Mere Exposure to Money Triggers a Business Decision Frame and Unethical Outcomes

ERIC Educational Resources Information Center

Kouchaki, Maryam; Smith-Crowe, Kristin; Brief, Arthur P.; Sousa, Carlos

2013-01-01

Can mere exposure to money corrupt? In four studies, we examined the likelihood of unethical outcomes when the construct of money was activated through the use of priming techniques. The results of Study 1 demonstrated that individuals primed with money were more likely to demonstrate unethical intentions than those in the control group. In Study…

Multifactorial analysis of human blood cell responses to clinical total body irradiation

NASA Technical Reports Server (NTRS)

Yuhas, J. M.; Stokes, T. R.; Lushbaugh, C. C.

1972-01-01

Multiple regression analysis techniques are used to study the effects of therapeutic radiation exposure, number of fractions, and time on such quantal responses as tumor control and skin injury. The potential of these methods for the analysis of human blood cell responses is demonstrated and estimates are given of the effects of total amount of exposure and time of protraction in determining the minimum white blood cell concentration observed after exposure of patients from four disease groups.

[Multivisceral organ procurement for transplantation derived mobilization maneouvres: very helpful auxiliary techniques in the excision of large retroperitoneal masses].

PubMed

González, Javier; Shirodkar, S P; Ciancio, G

2011-04-01

The excision of large retroperitoneal masses poses a challenge for every surgeon. Sometimes the urologist must face situations that do not fit to any conventional approach or technique previously described. Obtaining adequate exposure for safe and oncologically correct management of these masses is based, on many cases, in the mobilization of anatomical adjacent structures to generate a sufficient field in abdominal areas of difficult access. Complex visceral mobilization maneuvers derived from multivisceral transplantation organ procurement surgery provides ancillary techniques that used properly facilitate their successful resolution. The main purpose of this paper is the description of these surgical maneuvers essential to increase both exposure and vascular control in addressing the ever-dreaded high-volume retroperitoneal masses.

A comparison between self-reported and GIS-based proxies of residential exposure to environmental pollution in a case-control study on lung cancer.

PubMed

Cordioli, M; Ranzi, A; Freni Sterrantino, A; Erspamer, L; Razzini, G; Ferrari, U; Gatti, M G; Bonora, K; Artioli, F; Goldoni, C A; Lauriola, P

2014-06-01

In epidemiological studies both questionnaire results and GIS modeling have been used to assess exposure to environmental risk factors. Nevertheless, few studies have used both these techniques to evaluate the degree of agreement between different exposure assessment methodologies. As part of a case-control study on lung cancer, we present a comparison between self-reported and GIS-derived proxies of residential exposure to environmental pollution. 649 subjects were asked to fill out a questionnaire and give information about residential history and perceived exposure. Using GIS, for each residence we evaluated land use patterns, proximity to major roads and exposure to industrial pollution. We then compared the GIS exposure-index values among groups created on the basis of questionnaire responses. Our results showed a relatively high agreement between the two methods. Although none of these methods is the "exposure gold standard", understanding similarities, weaknesses and strengths of each method is essential to strengthen epidemiological evidence. Copyright © 2014 Elsevier Ltd. All rights reserved.

Arbitrary shape region-of-interest fluoroscopy system

NASA Astrophysics Data System (ADS)

Xu, Tong; Le, Huy; Molloi, Sabee Y.

2002-05-01

Region-of-interest (ROI) fluoroscopy has previously been investigated as a method to reduce x-ray exposure to the patient and the operator. This ROI fluoroscopy technique allows the operator to arbitrarily determine the shape, size, and location of the ROI. A device was used to generate patient specific x-ray beam filters. The device is comprised of 18 step-motors that control a 16 X 16 matrix of pistons to form the filter from a deformable attenuating material. Patient exposure reductions were measured to be 84 percent for a 65 kVp beam. Operator exposure reduction was measured to be 69 percent. Due to the reduced x-ray scatter, image contrast was improved by 23 percent inside the ROI. The reduced gray level in the periphery was corrected using an experimentally determined compensation ratio. A running average interpolation technique was used to eliminate the artifacts from the ROI edge. As expected, the final corrected images show increased noise in the periphery. However, the anatomical structures in the periphery could still be visualized. This arbitrary shaped region of interest fluoroscopic technique was shown to be effective in terms of its ability to reduce patient and operator exposure without significant reduction in image quality. The ability to define an arbitrary shaped ROI should make the technique more clinically feasible.

USB video image controller used in CMOS image sensor

NASA Astrophysics Data System (ADS)

Zhang, Wenxuan; Wang, Yuxia; Fan, Hong

2002-09-01

CMOS process is mainstream technique in VLSI, possesses high integration. SE402 is multifunction microcontroller, which integrates image data I/O ports, clock control, exposure control and digital signal processing into one chip. SE402 reduces the number of chips and PCB's room. The paper studies emphatically on USB video image controller used in CMOS image sensor and give the application on digital still camera.

A new method to precisely control the depth of percutaneous screws into the pedicle by counting the rotation number of the screw with low radiation exposure: technical note.

PubMed

Li, Xu; Zhang, Feng; Zhang, Wenzhi; Shang, Xifu; Han, Jintao; Liu, Pengfei

2017-03-01

Technique note. To report a new method for precisely controlling the depth of percutaneous pedicle screws (PPS)-without radiation exposure to surgeons and less fluoroscopy exposure to patients than with conventional methods. PPS is widely used in minimal invasive spine surgery; the advantages include reduced muscle damage, pain, and hospital stays. However, placement of PPS demands repeated checking with fluoroscopy. Thus, radiation exposure is considerable for both surgeons and patients. The PPS depth was determined by counting rotations of the screws. The distance between screw threads can be measured for particular screws; thus, full rotations of the PPS results in the screw advancing in the pedicle the distance between screw threads. To fully insert screws into the pedicle, the number of full rotations is equal to the number of threads in the PPS. We applied this technique in 58 patients with thoracolumbar fracture. The position and depth of the screws was checked during the operation with the C-arm and after operation by anteroposterior X-ray film or computed tomography. No additional procedures were required to correct the screws; we observed no neurological deficits or malpositioning of the screws. In the screw placement procedure, the radiation exposure for surgeons is zero, and the patient is well protected from extensive radiation exposure. This method of counting rotation of screws is a safe way to precisely determine the depth of PPS in the placement procedure. IV.

Optical micromanipulation of active cells with minimal perturbations: direct and indirect pushing.

PubMed

Wang, Chenlu; Chowdhury, Sagar; Gupta, Satyandra K; Losert, Wolfgang

2013-04-01

The challenge to wide application of optical tweezers in biological micromanipulation is the photodamage caused by high-intensity laser exposure to the manipulated living systems. While direct exposure to infrared lasers is less likely to kill cells, it can affect cell behavior and signaling. Pushing cells with optically trapped objects has been introduced as a less invasive alternative, but the technique includes some exposure of the biological object to parts of the optical tweezer beam. To keep the cells farther away from the laser, we introduce an indirect pushing-based technique for noninvasive manipulation of sensitive cells. We compare how cells respond to three manipulation approaches: direct manipulation, pushing, and indirect pushing. We find that indirect manipulation techniques lessen the impact of manipulation on cell behavior. Cell survival increases, as does the ability of cells to maintain shape and wiggle. Our experiments also demonstrate that indirect pushing allows cell-cell contacts to be formed in a controllable way, while retaining the ability of cells to change shape and move.

Estimating occupational exposure to the pyrethroid termiticide bifenthrin by measuring metabolites in urine.

PubMed

Smith, P A; Thompson, M J; Edwards, J W

2002-10-05

The control of subterranean termites in Australia is predominantly through the application of chemical barriers in the soil beneath and surrounding buildings. The chemicals used to repel or kill termites are the organophosphorus insecticide, chlorpyrifos, and the synthetic pyrethroid, bifenthrin. These are applied through surface sprays and subfloor injection by licensed pest control operators. To determine the exposure of these personnel to these pesticides it is most usual to measure airborne concentrations or dermal deposition rates. However, to support information obtained from these methods it is often appropriate to determine the amount of the chemicals absorbed, using biological monitoring techniques including measurement of the chemicals or their metabolites in urine. While there are effective techniques for the monitoring of chlorpyrifos exposure by measuring either the alkyl phosphate or trichloropyridinol metabolites, there have been no published reports of suitable methods to measure bifenthrin metabolites in urine. This paper describes an extraction and HPLC-UV method used to simultaneously measure the urinary excretion of 2-methyl-3-phenylbenzoic acid (MPA), a metabolite of bifenthrin, and 3-phenoxybenzoic acid (PBA), a metabolite of several other common pyrethroid insecticides, with a detection limit for each of 2.5 ng/ml. The paper also describes the pilot application of this method to a study of South Australian pest control operators handling bifenthrin. MPA ranged from 1.8 to 31.9 microg/g creatinine and PBA from 1.3 to 30.0 microg/g in the urine of pest control workers. MPA was detected in urine of control workers without bifenthrin exposure only at low levels (1.0-1.4 microg/g creatinine), but PBA was found in both at higher levels (1.2-61.1 microg/g creatinine). Copyright 2002 Elsevier Science B.V.

Respiratory tract toxicity in rats exposed to Mexico City air.

PubMed

Moss, O R; Gross, E A; James, R A; Janszen, D B; Ross, P W; Roberts, K C; Howard, A M; Harkema, J R; Calderón-Garcidueñas, L; Morgan, K T

2001-03-01

The rat has been used extensively as a health sentinel, indicator, or monitor of environmental health hazards, but this model has not been directly validated against human exposures. Humans in Mexico City show upper respiratory tract lesions and evidence of pulmonary damage related to their environmental inhalation exposure. In this study, male and female F344 rats were exposed (23 hr/day) in Mexico City to local Mexico City air (MCA)* for up to seven weeks. Controls were maintained at the same location under filtered air. Prior to these exposures, several steps were taken. First, the nasal passages of normal male rats shipped from the United States and housed in Mexico City were examined for mycoplasma infection; no evidence of infection was found. In addition, a mobile exposure and monitoring system was assembled and, with an ozone (O3) exposure atmosphere, was tested along with supporting histopathology techniques and analysis of rat nasal and lung tissues. Last, the entire exposure model (equipment and animals) was transported to Mexico City and validated for a three-week period. During the seven-week study there were 18 one-hour intervals during which the average O3 concentration of MCA in the exposure chamber exceeded the US National Ambient Air Quality Standard (NAAQS) of 0.120 ppm 03 (hourly average, not to be exceeded more than once per year). This prolonged exposure of healthy F344 rats to MCA containing episodically low to moderate concentrations of 03 (as well as other urban air pollutants) did not induce inflammatory or epithelial lesions in the nasal airways or lung as measured by qualitative histologic techniques or quantitative morphometric techniques. These findings agree with those of previous controlled O3 inhalation studies, but they are in contrast to reports indicating that O3-polluted MCA causes significant nasal mucosal injury in adults and children living in southwestern Mexico City. Taken together, these findings may suggest that human airways are markedly more susceptible to the toxic effects of MCA than are the airways of the F344 rat.

Inhibition of the expression of aquaporin‑1 by RNA interference in pulmonary epithelial cells and its effects on water transport.

PubMed

Zhang, Qiuyue; Fu, Jianhua; Xue, Xindong

2016-01-01

In the present study, the effect of aquaporin‑1 (AQP1) on fluid transportation in pulmonary epithelial cells, and the role of AQP1 in alveolar fluid clearance were investigated to provide an experimental foundation to elucidate the pathogenesis of hyperoxic lung edema. An siRNA transfection technique was used to silence AQP1 in the A549 cell line. The transfected cells were randomized into a hyperoxia exposure and an air control group, with a negative control group set for each group. Cell volume was determined using flow cytometry, and Pf values were used to determine osmotic water permeability. Cell volume was found to be reduced in the AQP1‑silenced A549 cells, compared with the negative control group 72 h following air exposure. In addition, cell volume was reduced in the AQP1‑silenced A549 cells, compared with the negative control group 48 and 72 h following hyperoxia exposure. The osmotic water permeability of the AQP1‑silenced cells was reduced in the air control and hyperoxia exposure groups, compared with the negative control group 48 and 72 h following exposure. The volume and cell membrane osmotic water permeability of the A549 cells were reduced, compared with those in the control group following AQP1‑silencing, which indicated that the downregulation of AQP1 impedes extracellular to intracellular fluid transportation. Therefore, the disturbance in alveolar fluid clearance resulting from the downregulation of AQP1 following hyperoxia exposure may be one of the key mechanisms responsible for hyperoxic lung edema.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Che, Magnus M.; Conti, Michele; Chanda, Soma

We evaluated the protective efficacy of nasal atropine methyl bromide (AMB) which does not cross the blood-brain barrier against sarin inhalation exposure. Age and weight matched male guinea pigs were exposed to 846.5 mg/m{sup 3} sarin using a microinstillation inhalation exposure technique for 4 min. The survival rate at this dose was 20%. Post-exposure treatment with nasal AMB (2.5 mg/kg, 1 min) completely protected against sarin induced toxicity (100% survival). Development of muscular tremors was decreased in animals treated with nasal AMB. Post-exposure treatment with nasal AMB also normalized acute decrease in blood oxygen saturation and heart rate following sarinmore » exposure. Inhibition of blood AChE and BChE activities following sarin exposure was reduced in animals treated with nasal AMB, indicating that survival increases the metabolism of sarin or expression of AChE. The body weight loss of animals exposed to sarin and treated with nasal AMB was similar to saline controls. No differences were observed in lung accessory lobe or tracheal edema following exposure to sarin and subsequent treatment with nasal AMB. Total bronchoalveolar lavage fluid (BALF) protein, a biomarker of lung injury, showed trends similar to saline controls. Surfactant levels post-exposure treatment with nasal AMB returned to normal, similar to saline controls. Alkaline phosphatase levels post-exposure treatment with nasal AMB were decreased. Taken together, these data suggest that nasal AMB blocks the copious airway secretion and peripheral cholinergic effects and protects against lethal inhalation exposure to sarin thus increasing survival.« less

Guidelines for safe handling, use and disposal of nanoparticles

NASA Astrophysics Data System (ADS)

Amoabediny, G. H.; Naderi, A.; Malakootikhah, J.; Koohi, M. K.; Mortazavi, S. A.; Naderi, M.; Rashedi, H.

2009-05-01

Health, safety and environmental (HSE) risks of a technology is an inseparable part of it which threatens all exposed employees. It has been proved for many years that exposure to particles, in an occupational setting, could be linked with the onset of lung diseases, such as pneumoconiosis, chronic obstructive pulmonary disease (COPD), and mesotelioma and lung cancer. Nanoparticles, due to their unique characteristics including; small size, shape, high surface area, charge, chemical properties, solubility, and degree of agglomeration can cross cell boundaries or pass directly from the lungs into the blood stream and ultimately reach to all of the organs in the body. This is the reason why they may pose higher risk than the same mass and material of larger particles. Moreover, biodegradation of nanoparticles by some kinds of fungi (like wood decay fungi) may result in metabolites which may be toxic to microorganisms under aerobic and anaerobic conditions. Bacteria and living cells can take up nanoparticles, providing the basis for potential bioaccumulation in the food chain. Considering Iran's prominent position in nanotechnologies and fast-growing in research and industrial activities, controlling nanoparticles related HSE risks should be highly considered. In general, there are three main approaches to risk and exposure control: engineering techniques, administrative means and personal protective equipments. These complementary approaches especially engineering techniques should be considered starting with the design stage of an industrial process. Administrative means of control constitute an additional approach when the other methods have not achieved the expected control levels. Administrative means of control must never substitute for engineering techniques, which always be performed according to standard practices. In some situations, due to insufficiently advanced technology and prohibitive costs, engineering measerus can not be implemended. In these situations, performing administrative means of control constitute other ways of limiaiting the occupational exposure risks. Accordingly, to minimize the risks from know and unknown health, safety and invironment hazards in research and occupational setting of the country, guideline for safe handling, use and disposal of manopractical has provided.

Electron-beam lithography with character projection technique for high-throughput exposure with line-edge quality control

NASA Astrophysics Data System (ADS)

Ikeno, Rimon; Maruyama, Satoshi; Mita, Yoshio; Ikeda, Makoto; Asada, Kunihiro

2016-07-01

The high throughput of character projection (CP) electron-beam (EB) lithography makes it a promising technique for low-to-medium volume device fabrication with regularly arranged layouts, such as for standard-cell logics and memory arrays. However, non-VLSI applications such as MEMS and MOEMS may not be able to fully utilize the benefits of the CP method due to the wide variety of layout figures including curved and oblique edges. In addition, the stepwise shapes that appear because of the EB exposure process often result in intolerable edge roughness, which degrades device performances. In this study, we propose a general EB lithography methodology for such applications utilizing a combination of the CP and variable-shaped beam methods. In the process of layout data conversion with CP character instantiation, several control parameters were optimized to minimize the shot count, improve the edge quality, and enhance the overall device performance. We have demonstrated EB shot reduction and edge-quality improvement with our methodology by using a leading-edge EB exposure tool, ADVANTEST F7000S-VD02, and a high-resolution hydrogen silsesquioxane resist. Atomic force microscope observations were used to analyze the resist edge profiles' quality to determine the influence of the control parameters used in the data conversion process.

MERCURY MEASUREMENTS USING DIRECT-ANALYZER METHODOLOGY

EPA Science Inventory

Under EPA's Water Quality Research Program, exposure studies are needed to determine how well control strategies and guidance are working. Consequently, reliable and convenient techniques that minimize waste production are of special interest. While traditional methods for determ...

Radiation Induced Degradation of the White Thermal Control Paints Z-93 and Z-93P

NASA Technical Reports Server (NTRS)

Edwards, D. L.; Zwiener, J. M.; Wertz, G. E.; Vaughn, J. A.; Kamenetzky, R. R.; Finckenor, M. M.; Meshishnek, M. J.

1996-01-01

This paper details a comparison analysis of the zinc oxide pigmented white thermal control paints Z-93 and Z-93P. Both paints were simultaneously exposed to combined space environmental effects and analyzed using an in-vacuo reflectance technique. The dose applied to the paints was approximately equivalent to 5 years in a geosynchronous orbit. This comparison analysis showed that Z-93P is an acceptable substitute for Z-93. Irradiated samples of Z-93 and Z-93P were subjected to additional exposures of ultraviolet (UV) radiation and analyzed using the in-vacuo reflectance technique to investigate UV activated reflectance recovery. Both samples showed minimal UV activated reflectance recovery after an additional 190 equivalent sun hour (ESH) exposure. Reflectance response utilizing nitrogen as a repressurizing gas instead of air was also investigated. This investigation found the rates of reflectance recovery when repressurized with nitrogen are slower than when repressurized with air.

Radiation Induced Degradation of White Thermal Control Paint

NASA Technical Reports Server (NTRS)

Edwards, D. L.; Zwiener, J. M.; Wertz, G. E.; Vaughn, Jason A.; Kamenetzky, Rachel R.; Finckenor, M. M.; Meshishnek, M. J.

1999-01-01

This paper details a comparison analysis of the zinc-oxide pigmented white thermal control paints Z-93 and Z-93P. Both paints were simultaneously exposed to combined space environmental effects and analyzed using an in-vacuo reflectance technique. The dose applied to the paints was approximately equivalent to 5 yr in a geosynchronous orbit. This comparison analysis showed that Z-93P is an acceptable substitute for Z-93. Irradiated samples of Z-93 and Z-93P were subjected to additional exposures of ultraviolet (UV) radiation and analyzed using the in-vacuo reflectance technique to investigate UV activated reflectance recovery. Both samples showed minimal UV activated reflectance recovery after an additional 190 equivalent Sun hour (ESH) exposure. Reflectance response utilizing nitrogen as a repressurizing gas instead of air was also investigated. This investigation found the rates of reflectance recovery when repressurized with nitrogen are slower than when repressurized with air.

Increased incidence of micronuclei assessed with the micronucleus assay and the fluorescence in situ hybridization (FISH) technique in peripheral blood lymphocytes of nurses exposed to nitrous oxide.

PubMed

Lewińska, D; Stepnik, M; Krajewski, W; Arkusz, J; Stańczyk, M; Wrońska-Nofer, T

2005-03-07

It has been postulated that exposure to nitrous oxide and halogenated anaesthetics is associated with various adverse health effects such as neurological and reproductive abnormalities or impairment of hepatic functions. In spite of the quite well known genotoxic effects of exposure to nitrous oxide in vivo, the mechanisms of these effects are still not clear. The aim of this study was to assess the frequency of micronuclei and to identify the type of chromosomal damage (clastogenic or aneugenic) in peripheral blood lymphocytes of operating-room nurses exposed to nitrous oxide. The study group comprised 46 women working at departments where the concentration of nitrous oxide ranged from 14 to 2308 mg/m3. The control population was composed of 28 women employed in the same hospitals but in non-surgical departments. The clastogenic/aneugenic effect of nitrous oxide was evaluated in lymphocytes using the standard micronucleus (MN) assay in combination with the fluorescence in situ hybridization (FISH) technique with pancentromeric probes. The results show a significant increase of the MN frequency in lymphocytes of exposed nurses compared with the control group (4.36+/-2.23 versus 9.02+/-4.67). The multiple regression analysis revealed a statistically significant relationship (p=0.0009) between MN frequency and exposure status, indicating that the level of exposure was the main factor affecting chromosomal damage. As assessed by FISH analysis, the overall frequencies of centromere-positive MN in the control and exposed groups were 43 and 49%, respectively. The increase observed in the exposed group may suggest a slight, statistically insignificant pro-aneugenic effect of exposure to nitrous oxide.

Risk assessments using the Strain Index and the TLV for HAL, Part I: Task and multi-task job exposure classifications.

PubMed

Kapellusch, Jay M; Bao, Stephen S; Silverstein, Barbara A; Merryweather, Andrew S; Thiese, Mathew S; Hegmann, Kurt T; Garg, Arun

2017-12-01

The Strain Index (SI) and the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value for Hand Activity Level (TLV for HAL) use different constituent variables to quantify task physical exposures. Similarly, time-weighted-average (TWA), Peak, and Typical exposure techniques to quantify physical exposure from multi-task jobs make different assumptions about each task's contribution to the whole job exposure. Thus, task and job physical exposure classifications differ depending upon which model and technique are used for quantification. This study examines exposure classification agreement, disagreement, correlation, and magnitude of classification differences between these models and techniques. Data from 710 multi-task job workers performing 3,647 tasks were analyzed using the SI and TLV for HAL models, as well as with the TWA, Typical and Peak job exposure techniques. Physical exposures were classified as low, medium, and high using each model's recommended, or a priori limits. Exposure classification agreement and disagreement between models (SI, TLV for HAL) and between job exposure techniques (TWA, Typical, Peak) were described and analyzed. Regardless of technique, the SI classified more tasks as high exposure than the TLV for HAL, and the TLV for HAL classified more tasks as low exposure. The models agreed on 48.5% of task classifications (kappa = 0.28) with 15.5% of disagreement between low and high exposure categories. Between-technique (i.e., TWA, Typical, Peak) agreement ranged from 61-93% (kappa: 0.16-0.92) depending on whether the SI or TLV for HAL was used. There was disagreement between the SI and TLV for HAL and between the TWA, Typical and Peak techniques. Disagreement creates uncertainty for job design, job analysis, risk assessments, and developing interventions. Task exposure classifications from the SI and TLV for HAL might complement each other. However, TWA, Typical, and Peak job exposure techniques all have limitations. Part II of this article examines whether the observed differences between these models and techniques produce different exposure-response relationships for predicting prevalence of carpal tunnel syndrome.

[Assessment of the surgeon radiation exposure during a minimally invasive TLIF: Comparison between fluoroscopy and O-arm system].

PubMed

Grelat, M; Zairi, F; Quidet, M; Marinho, P; Allaoui, M; Assaker, R

2015-08-01

Transforaminal lumbar interbody fusion with a minimally invasive approach (MIS TLIF) has become a very popular technique in the treatment of degenerative diseases of the lumbar spine, as it allows a decrease in muscle iatrogenic. However, iterative radiological controls inherent to this technique are responsible for a significant increase in exposure to ionizing radiation for the surgeon. New techniques for radiological guidance (O-arm navigation-assisted) would overcome this drawback, but this remains unproven. To analyze the exposure of the surgeon to intraoperative X-ray during a MIS TLIF under fluoroscopy and under O-arm navigation-assisted. This prospective study was conducted at the University Hospital of Lille from February to May 2013. Twelve patients underwent a MIS TLIF for the treatment of low-grade spondylolisthesis; six under standard fluoroscopy (group 1) and six under O-arm system (group 2). Passive dosimeters (rings and glasses) and active dosimeters for thorax were used to measure the radiation exposure of the surgeon. For group 1, the average time of fluoroscopy was 3.718 minutes (3.13-4.56) while no radioscopy was perform on group 2. For the first group, the average exposure dose was 12 μSv (5-20 μSv) on the thorax, 1168 μSv (510-2790 μSv) on the main hand and 179 μSv (103-486 μSv) on the lens. The exposure dose was measured zero on the second group. The maximum recommended doses can be reached, mainly for the lens. In addition to the radioprotection measures, O-arm navigation systems are safe alternatives to significantly reduce surgeon exposure. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Exposure of healthy subjects with emissions from a gas metal arc welding process: part 1--exposure technique and external exposure.

PubMed

Brand, P; Havlicek, P; Steiners, M; Holzinger, K; Reisgen, U; Kraus, T; Gube, M

2013-01-01

Studies concerning welding fume-related adverse health effects in welders are hampered by the heterogeneity of workplace situations, resulting in complex and non-standardized exposure conditions. In order to carry out welding fume exposure studies under controlled and standardized conditions, the Aachen Workplace Simulation Laboratory was developed. This laboratory consists of an emission room, in which welding fume is produced, and an exposure room in which human subjects are exposed to these fumes. Both rooms are connected by a ventilation system which allows the welding fume concentration to be regulated. Particle mass concentration was measured with a TEOM microbalance and the particle number-size distribution using a Grimm SMPS device. In a study, which is the subject of this paper, it has been shown that welding fume concentration can easily be regulated between 1 and about 3 mg m(-3). The chosen concentration can be kept constant for more than 8 h. However, transport of the particles from the emission room into the exposure room leads to a change in particle size distribution, which is probably due to coagulation of the fraction of smallest particles. The Aachen Workplace Simulation Laboratory is suitable for controlled exposure studies with human subjects.

An industrial radiography exposure device based on measurement of transmitted gamma-ray intensity

NASA Astrophysics Data System (ADS)

Polee, C.; Chankow, N.; Srisatit, S.; Thong-Aram, D.

2015-05-01

In film radiography, underexposure and overexposure may happen particularly when lacking information of specimen material and hollowness. This paper describes a method and a device for determining exposure in industrial gamma-ray radiography based on quick measurement of transmitted gamma-ray intensity with a small detector. Application software was developed for Android mobile phone to remotely control the device and to display counting data via Bluetooth communication. Prior to film exposure, the device is placed behind a specimen to measure transmitted intensity which is inversely proportional to the exposure. Unlike in using the conventional exposure curve, correction factors for source decay, source-to- film distance, specimen thickness and kind of material are not needed. The developed technique and device make radiographic process economic, convenient and more reliable.

Automated diagnosis of fetal alcohol syndrome using 3D facial image analysis

PubMed Central

Fang, Shiaofen; McLaughlin, Jason; Fang, Jiandong; Huang, Jeffrey; Autti-Rämö, Ilona; Fagerlund, Åse; Jacobson, Sandra W.; Robinson, Luther K.; Hoyme, H. Eugene; Mattson, Sarah N.; Riley, Edward; Zhou, Feng; Ward, Richard; Moore, Elizabeth S.; Foroud, Tatiana

2012-01-01

Objectives Use three-dimensional (3D) facial laser scanned images from children with fetal alcohol syndrome (FAS) and controls to develop an automated diagnosis technique that can reliably and accurately identify individuals prenatally exposed to alcohol. Methods A detailed dysmorphology evaluation, history of prenatal alcohol exposure, and 3D facial laser scans were obtained from 149 individuals (86 FAS; 63 Control) recruited from two study sites (Cape Town, South Africa and Helsinki, Finland). Computer graphics, machine learning, and pattern recognition techniques were used to automatically identify a set of facial features that best discriminated individuals with FAS from controls in each sample. Results An automated feature detection and analysis technique was developed and applied to the two study populations. A unique set of facial regions and features were identified for each population that accurately discriminated FAS and control faces without any human intervention. Conclusion Our results demonstrate that computer algorithms can be used to automatically detect facial features that can discriminate FAS and control faces. PMID:18713153

Development of a New Technique to Assess Susceptibility to Predation Resulting from Sublethal Stresses (Indirect Mortality)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cada, G.F.

2003-08-25

Fish that pass through a hydroelectric turbine may not be killed directly, but may nonetheless experience sublethal stresses that will increase their susceptibility to predators (indirect mortality). There is a need to develop reliable tests for indirect mortality so that the full consequences of passage through turbines (and other routes around a hydroelectric dam) can be assessed. We evaluated a new technique for assessing indirect mortality, based on a behavioral response to a startling stimulus (akin to perceiving an approaching predator). We compare this technique to the standard predator preference test. The behavioral response is a rapid movement commonly referredmore » to as a startle response, escape response, or C-shape, based on the characteristic body position assumed by the fish. When viewed from above, a startled fish bends into a C-shape, then springs back and swims away in a direction different from its original orientation. This predator avoidance (escape) behavior can be compromised by sublethal stresses that temporarily stun or disorient the fish. We subjected striped shiners and fathead minnows to varying intensities of either turbulence (10-, 20- or 30-min) or 2-min exposures to a fish anesthetic (100 or 200 mg/L of tricaine methanesulfonate), and evaluated their subsequent behavior. Individual fish were given a startle stimulus and filmed with a high-speed video camera. Each fish was startled and filmed twice before being stressed, and then at 1-, 5-, 15-, and 30-min post-exposure. The resulting image files were analyzed for a variety of behavioral measures including: presence of a response, time to first reaction, duration of reaction, time to formation of maximum C-shape, time to completion of C-shape, and completeness of C-shape. The most immediate measure of potential changes in fish behavior was whether stressed fish exhibited a startle response. For striped shiners, the number of fish not responding to the stimulus was significantly different from controls at 1-min post-exposure and for fathead minnows at 1- and 5-min post-exposure. The greatest effects occurred with exposure to the fish anesthetic; in fathead minnows all of the recorded measures were significantly different from controls at 1-min and 5-min post-exposure at the 100 mg/L dose. For striped shiners all recorded behavioral measures were significantly different from controls at 1-min at the 200 and 100 mg/L doses and for selected behavioral measures at 5-min. Turbulence also had significant effects on striped shiner startle responses following 20- and 30-min exposures for all behavioral measures at 1-min. The patterns suggest that any effects on startle response due to turbulence or low doses of anesthetic are short-lived, but can be evaluated using the escape behavior technique. The most useful indication of changes in escape behavior in these tests was the simple reaction/no reaction to the startle stimulus. The startle response occurred reliably among unstressed fish, and was frequently reduced or eliminated in fish exposed to turbulence or anesthesia. The other behavioral parameters observed were often altered by the sublethal stresses as well. A standard predator preference test was also conducted with largemouth bass as the predators and fathead minnows as prey. In this test design, groups of 10 unstressed fish (controls) and 10 stressed fish were put in a tank with a predator. The stressed fathead minnows were exposed to turbulence or fish anesthetic. The predator was allowed to eat half of the prey, and the data were evaluated to determine whether predators consumed greater proportions of stressed minnows than control minnows. The predation test indicated that exposure to MS-222 resulted in significant predation in fathead minnows, but exposure to turbulence did not. This pattern was the same as seen in fathead minnows using the startle response (escape behavior) test. For the sublethal stresses we applied, evaluation of changes in fish escape behavior yielded results comparable to traditional predator preference tests. Because this fish behavior test is simpler and quicker to conduct than predator preference tests, it shows promise as a useful technique for assessing indirect mortality resulting from sublethal stresses.« less

Adaptation of the neutral bacterial comet assay to assess antimicrobial-mediated DNA double-strand breaks in Escherichia coli

PubMed Central

SOLANKY, DIPESH; HAYDEL, SHELLEY E.

2012-01-01

This study aimed to determine the mechanism of action of a natural antibacterial clay mineral mixture, designated CB, by investigating the induction of DNA double-strand breaks (DSBs) in Escherichia coli. To quantify DNA damage upon exposure to soluble antimicrobial compounds, we modified a bacterial neutral comet assay, which primarily associates the general length of an electrophoresed chromosome, or comet, with the degree of DSB-associated DNA damage. To appropriately account for antimicrobial-mediated strand fragmentation, suitable control reactions consisting of exposures to water, ethanol, kanamycin, and bleomycin were developed and optimized for the assay. Bacterial exposure to the CB clay resulted in significantly longer comet lengths, compared to water and kanamycin exposures, suggesting that the induction of DNA DSBs contributes to the killing activity of this antibacterial clay mineral mixture. The comet assay protocol described herein provides a general technique for evaluating soluble antimicrobial-derived DNA damage and for comparing DNA fragmentation between experimental and control assays. PMID:22940101

Single-cell optoporation and transfection using femtosecond laser and optical tweezers.

PubMed

Waleed, Muhammad; Hwang, Sun-Uk; Kim, Jung-Dae; Shabbir, Irfan; Shin, Sang-Mo; Lee, Yong-Gu

2013-01-01

In this paper, we demonstrate a new single-cell optoporation and transfection technique using a femtosecond Gaussian laser beam and optical tweezers. Tightly focused near-infrared (NIR) femtosecond laser pulse was employed to transiently perforate the cellular membrane at a single point in MCF-7 cancer cells. A distinct technique was developed by trapping the microparticle using optical tweezers to focus the femtosecond laser precisely on the cell membrane to puncture it. Subsequently, an external gene was introduced in the cell by trapping and inserting the same plasmid-coated microparticle into the optoporated cell using optical tweezers. Various experimental parameters such as femtosecond laser exposure power, exposure time, puncture hole size, exact focusing of the femtosecond laser on the cell membrane, and cell healing time were closely analyzed to create the optimal conditions for cell viability. Following the insertion of plasmid-coated microparticles in the cell, the targeted cells exhibited green fluorescent protein (GFP) under the fluorescent microscope, hence confirming successful transfection into the cell. This new optoporation and transfection technique maximizes the level of selectivity and control over the targeted cell, and this may be a breakthrough method through which to induce controllable genetic changes in the cell.

COMPARING PESTICIDE TRANSFERS FROM RESIDENTIAL SURFACE USING TRANSFERABLE RESIDUE SAMPLING TECHNIQUES AND VIDEO-FLUORESCENT IMAGING

EPA Science Inventory

The recent change from organophosphate (OP) to pyrethroid insecticides for indoor residential pest control may significantly affect the relative importance of different exposure routes because of differences in physical/chemical properties of these two classes of compounds. In...

Research in Computer Forensics

DTIC Science & Technology

2002-06-01

systems and how they can aid in the recovery of digital evidence in a forensic analysis. Exposures to hacking techniques and tools in CS3675—Internet...cryptography, access control, authentication, biometrics, actions to be taken during an attack and case studies of hacking and information warfare. 11...chat, surfing, instant messaging and hacking with powerful access control and filter capabilities. The monitor can operates in a Prevention mode to

Risk assessments using the Strain Index and the TLV for HAL, Part II: Multi-task jobs and prevalence of CTS.

PubMed

Kapellusch, Jay M; Silverstein, Barbara A; Bao, Stephen S; Thiese, Mathew S; Merryweather, Andrew S; Hegmann, Kurt T; Garg, Arun

2018-02-01

The Strain Index (SI) and the American Conference of Governmental Industrial Hygienists (ACGIH) threshold limit value for hand activity level (TLV for HAL) have been shown to be associated with prevalence of distal upper-limb musculoskeletal disorders such as carpal tunnel syndrome (CTS). The SI and TLV for HAL disagree on more than half of task exposure classifications. Similarly, time-weighted average (TWA), peak, and typical exposure techniques used to quantity physical exposure from multi-task jobs have shown between-technique agreement ranging from 61% to 93%, depending upon whether the SI or TLV for HAL model was used. This study compared exposure-response relationships between each model-technique combination and prevalence of CTS. Physical exposure data from 1,834 workers (710 with multi-task jobs) were analyzed using the SI and TLV for HAL and the TWA, typical, and peak multi-task job exposure techniques. Additionally, exposure classifications from the SI and TLV for HAL were combined into a single measure and evaluated. Prevalent CTS cases were identified using symptoms and nerve-conduction studies. Mixed effects logistic regression was used to quantify exposure-response relationships between categorized (i.e., low, medium, and high) physical exposure and CTS prevalence for all model-technique combinations, and for multi-task workers, mono-task workers, and all workers combined. Except for TWA TLV for HAL, all model-technique combinations showed monotonic increases in risk of CTS with increased physical exposure. The combined-models approach showed stronger association than the SI or TLV for HAL for multi-task workers. Despite differences in exposure classifications, nearly all model-technique combinations showed exposure-response relationships with prevalence of CTS for the combined sample of mono-task and multi-task workers. Both the TLV for HAL and the SI, with the TWA or typical techniques, appear useful for epidemiological studies and surveillance. However, the utility of TWA, typical, and peak techniques for job design and intervention is dubious.

Active and passive ozone samplers based on a reaction with a binary reagent.

PubMed

Hackney, J D; Avol, E L; Linn, W S; Anderson, K R

1994-02-01

Ozone is one of the most toxic common air pollutants (judging from short-term animal and human exposure studies at realistic concentrations) and one of the most difficult and expensive pollutants to control. Because of ozone's high chemical reactivity, its concentrations may vary greatly over short distances, and fixed-site air quality monitors may not accurately estimate exposures of human populations. Epidemiologic research on ozone's long-term health effects has been inconclusive, partly because of the lack of reliable personal exposure information. The objective of this project was to develop a practical personal ozone exposure monitoring technique, and to document its precision and accuracy in actual use by representatives of freely ranging, ozone-exposed populations. The project site, Los Angeles, is the nation's metropolitan area with the highest level of ozone pollution and, thus, probably the most important locale for personal exposure assessment. Our overall strategy was (1) to select the most promising laboratory technique for ozone detection from published literature and private communications; (2) to design and test personal monitors using this technique; and (3) when feasible, to evaluate concurrently alternative methodologies developed by others. As indicated below, parts 1 and 2 of our strategy yielded a limited success with respect to short-term active sampling, i.e., measuring personal ozone exposure levels during one to two hours with a monitor incorporating a battery-powered air pump of the type used in industrial hygiene investigations. The same approach was not successful in passive sampling, i.e., measuring exposure levels during multihour or multiday periods with a light-weight, diffusion-controlled "badge" sampler having no moving parts. Passive badge samplers could be calibrated reasonably well in laboratory exposures to ozone in otherwise pure air, but they greatly overestimated ozone levels in outdoor ambient air. Part 3 of our strategy yielded more promising information on an alternative passive badge design. After testing and rejecting two other possibilities, we chose a binary organic reagents, 3-methyl-2-benzothiazolinone acetone azine with 2-phenylphenol, as the most promising chemical detector of ozone. Filter papers impregnated with the binary reagent develop a characteristic intense pink color when exposed to ozone. The inventors, J.E. Lambert and associates of Kansas State University, had intended only to develop a rough qualitative ozone monitor (Lambert et al. 1989). However, our initial laboratory testing (in exposure chambers containing ozone in otherwise very clean air, away from humans), revealed fairly accurate quantitative response.(ABSTRACT TRUNCATED AT 400 WORDS)

The Mediating Effect of Self-Control on Parenting and Delinquency: A Gendered Approach With a Multinational Sample.

PubMed

Muftić, Lisa R; Updegrove, Alexander H

2017-08-01

This study aims to clarify the relationships between parenting techniques, low self-control, and juvenile delinquency in Gottfredson and Hirschi's general theory of crime while controlling for alternative explanations of delinquency. We relied on a sample of 35,511 adolescent students from 31 countries from the International Self-Report Delinquency 2 Study. Results indicate that parenting exhibits a direct effect on adolescents' violence perpetration and property offending, and that while self-control weakens the strength of this relationship, it fails to fully mediate it. Males reported lower levels of self-control, exposure to poorer parenting techniques, and higher rates of violence perpetration and property offending. The relationship between parenting, self-control, and juvenile delinquency was similar for females and males. These results provide evidence that parenting has important implications for adolescents' involvement in delinquency above and beyond its influence on their level of self-control.

Computed tomography and patient risk: Facts, perceptions and uncertainties

PubMed Central

Power, Stephen P; Moloney, Fiachra; Twomey, Maria; James, Karl; O’Connor, Owen J; Maher, Michael M

2016-01-01

Since its introduction in the 1970s, computed tomography (CT) has revolutionized diagnostic decision-making. One of the major concerns associated with the widespread use of CT is the associated increased radiation exposure incurred by patients. The link between ionizing radiation and the subsequent development of neoplasia has been largely based on extrapolating data from studies of survivors of the atomic bombs dropped in Japan in 1945 and on assessments of the increased relative risk of neoplasia in those occupationally exposed to radiation within the nuclear industry. However, the association between exposure to low-dose radiation from diagnostic imaging examinations and oncogenesis remains unclear. With improved technology, significant advances have already been achieved with regards to radiation dose reduction. There are several dose optimization strategies available that may be readily employed including omitting unnecessary images at the ends of acquired series, minimizing the number of phases acquired, and the use of automated exposure control as opposed to fixed tube current techniques. In addition, new image reconstruction techniques that reduce radiation dose have been developed in recent years with promising results. These techniques use iterative reconstruction algorithms to attain diagnostic quality images with reduced image noise at lower radiation doses. PMID:28070242

Surgical Exposure to Control the Distal Internal Carotid Artery at the Base of the Skull during Carotid Aneurysm Repair.

PubMed

Davis, Laura; Zeitouni, Anthony; Makhoul, Nicholas; Steinmetz, Oren K

2016-07-01

Extracranial carotid artery aneurysms are rare. Treatment options for these lesions include endovascular interventions, such as coiling and stenting, or surgical reconstruction, such as resection and primary reanastomosis, or interposition bypass grafting. In this report, we describe the surgical technique used to perform surgical repair of an internal carotid artery aneurysm extending up to the base of the skull. Anterior exposure of the infratemporal fossa and distal control of the carotid artery at the level of the carotid canal was achieved through a transcervical approach, performing double mandibular osteotomies with superior reflection of the middle mandibular section. Copyright © 2016 Elsevier Inc. All rights reserved.

Creative Film-Making.

ERIC Educational Resources Information Center

Smallman, Kirk

The fundamentals of motion picture photography are introduced with a physiological explanation for the illusion of motion in a film. Film stock formats and emulsions, camera features, and lights are listed and described. Various techniques of exposure control are illustrated in terms of their effects. Photographing action with a stationary or a…

The development and use of respirator response functions as part of a workplace exposure monitoring program for control of potential respiratory hazards.

PubMed

Maxim, L D; Allshouse, J N; Chen, S H; Treadway, J; Venturin, D

1998-04-01

The traditional hierarchy of measures for control of potential respiratory hazards in the workplace includes (in order of preference) engineering controls, workplace practices, and use of respiratory protection. Although third in this hierarchy, respirators can be an important component of the control mix-particularly for difficult-to-control jobs, as an interim measure (pending implementation of other controls), and in cases where exposure is intermittent. One of the problems associated with the use of respirators as a control measure is that valid and adequate data on respirator usage are often not available. Absent these data it is difficult to determine the practical effectiveness of respirators and exposure calculations which include the protective effect of respirators are speculative. This paper presents models (and appropriate statistical fitting techniques) suitable for quantification of respirator usage and defines three potentially useful measures of effectiveness for a respirator program. These models are illustrated with monitoring data on refractory ceramic fiber (RCF) developed as part of a Consent Agreement between the RCF industry and the U.S. Environmental Protection Agency. For this substance there are extensive and comprehensive monitoring data available. The models and methods of analysis may prove applicable for other potential respiratory hazards in the workplace. Copyright 1998 Academic Press.

Can poison control data be used for pharmaceutical poisoning surveillance?

PubMed

Naun, Christopher A; Olsen, Cody S; Dean, J Michael; Olson, Lenora M; Cook, Lawrence J; Keenan, Heather T

2011-05-01

To determine the association between the frequencies of pharmaceutical exposures reported to a poison control center (PCC) and those seen in the emergency department (ED). A statewide population-based retrospective comparison of frequencies of ED pharmaceutical poisonings with frequencies of pharmaceutical exposures reported to a regional PCC. ED poisonings, identified by International Classification of Diseases, Version 9 (ICD-9) codes, were grouped into substance categories. Using a reproducible algorithm facilitated by probabilistic linkage, codes from the PCC classification system were mapped into the same categories. A readily identifiable subset of PCC calls was selected for comparison. Correlations between frequencies of quarterly exposures by substance categories were calculated using Pearson correlation coefficients and partial correlation coefficients with adjustment for seasonality. PCC reported exposures correlated with ED poisonings in nine of 10 categories. Partial correlation coefficients (r(p)) indicated strong associations (r(p)>0.8) for three substance categories that underwent large changes in their incidences (opiates, benzodiazepines, and muscle relaxants). Six substance categories were moderately correlated (r(p)>0.6). One category, salicylates, showed no association. Limitations Imperfect overlap between ICD-9 and PCC codes may have led to miscategorization. Substances without changes in exposure frequency have inadequate variability to detect association using this method. PCC data are able to effectively identify trends in poisonings seen in EDs and may be useful as part of a pharmaceutical poisoning surveillance system. The authors developed an algorithm-driven technique for mapping American Association of Poison Control Centers codes to ICD-9 codes and identified a useful subset of poison control exposures for analysis.

Assessment of occupational exposure to asbestos fibers: Contribution of analytical transmission electron microscopy analysis and comparison with phase-contrast microscopy.

PubMed

Eypert-Blaison, Céline; Romero-Hariot, Anita; Clerc, Frédéric; Vincent, Raymond

2018-03-01

From November 2009 to October 2010, the French general directorate for labor organized a large field-study using analytical transmission electron microscopy (ATEM) to characterize occupational exposure to asbestos fibers during work on asbestos containing materials (ACM). The primary objective of this study was to establish a method and to validate the feasibility of using ATEM for the analysis of airborne asbestos of individual filters sampled in various occupational environments. For each sampling event, ATEM data were compared to those obtained by phase-contrast optical microscopy (PCOM), the WHO-recommended reference technique. A total of 265 results were obtained from 29 construction sites where workers were in contact with ACM. Data were sorted depending on the combination of the ACM type and the removal technique. For each "ACM-removal technique" combination, ATEM data were used to compute statistical indicators on short, fine and WHO asbestos fibers. Moreover, exposure was assessed taking into account the use of respiratory protective devices (RPD). As in previous studies, no simple relationship was found between results by PCOM and ATEM counting methods. Some ACM, such as asbestos-containing plasters, generated very high dust levels, and some techniques generated considerable levels of dust whatever the ACM treated. On the basis of these observations, recommendations were made to measure and control the occupational exposure limit. General prevention measures to be taken during work with ACM are also suggested. Finally, it is necessary to continue acquiring knowledge, in particular regarding RPD and the dust levels measured by ATEM for the activities not evaluated during this study.

[Health protection for rural workers: the need to standardize techniques for quantifying dermal exposure to pesticides].

PubMed

Selmi, Giuliana da Fontoura Rodrigues; Trapé, Angelo Zanaga

2014-05-01

Quantification of dermal exposure to pesticides in rural workers, used in risk assessment, can be performed with different techniques such as patches or whole body evaluation. However, the wide variety of methods can jeopardize the process by producing disparate results, depending on the principles in sample collection. A critical review was thus performed on the main techniques for quantifying dermal exposure, calling attention to this issue and the need to establish a single methodology for quantification of dermal exposure in rural workers. Such harmonization of different techniques should help achieve safer and healthier working conditions. Techniques that can provide reliable exposure data are an essential first step towards avoiding harm to workers' health.

Patient radiation exposure during different kyphoplasty techniques.

PubMed

Panizza, Denis; Barbieri, Massimo; Parisoli, Francesco; Moro, Luca

2014-01-01

The scope of this study was to quantify patient radiation exposure during two different techniques of kyphoplasty (KP), which differ by a cement delivery method, in order to assess whether or not one of the two used methods can reduce the patient dose. Twenty patients were examined for this investigation. One X-ray fluoroscopy unit was used for localization, navigation and monitoring of cement delivery. The patient biometric data, the setting of the fluoroscope, the exposure time and the kerma-area product (KAP) were monitored in all the procedures for anteroposterior (AP) and lateral (LL) fluoroscopic projections in order to assess the range of radiation doses imparted to the patient. Theoretical entrance skin dose (ESD) and effective dose (E) were calculated from intraoperatively measured KAP. An average ET per procedure was 1.5±0.5 min for the manual injection technique (study A) and 1.4±0.4 min for the distance delivery technique (study B) in the AP plane, while 3.2±0.7 and 5.1±0.6 min in the lateral plane, respectively. ESD was estimated as an average of 0.10±0.06 Gy for study A and 0.13±0.13 Gy for study B in the AP or/and 0.59±0.46 and 1.05±0.36 Gy in the lateral view, respectively. The cumulative mean E was 1.9±1.0 mSv procedure(-1) for study A and 3.6±0.9 mSv procedure(-1) for study B. Patient radiation exposure and associated effective dose from KP may be considerable. The technique of distance cement delivery appears to be slower than the manual injection technique and it requires a more protracted fluoroscopic control in the lateral projection, so that this system entails a higher amount of dose to the patient.

Breast Cancer Detection

NASA Technical Reports Server (NTRS)

1976-01-01

NASA's Jet Propulsion Laboratory has come up with a technique to decrease exposure to harmful x-rays in mammographies or breast radiography. Usually, physicians make more than one exposure to arrive at an x-ray film of acceptable density. Now the same solar cells used to convert sunlight into electricity on space satellites can make a single exposure sufficient. When solar cell sensor is positioned directly beneath x-ray film, it can determine exactly when film has received sufficient radiation and has been exposed to optimum density. At that point associated electronic equipment sends signal to cut off x-ray source. Reduction of mammography to single exposures not only reduced x-ray hazard significantly, but doubled the number of patient examinations handled by one machine. The NASA laboratory used this control system at the Huntington Memorial Hospital with overwhelming success.

A practical method to standardise and optimise the Philips DoseRight 2.0 CT automatic exposure control system.

PubMed

Wood, T J; Moore, C S; Stephens, A; Saunderson, J R; Beavis, A W

2015-09-01

Given the increasing use of computed tomography (CT) in the UK over the last 30 years, it is essential to ensure that all imaging protocols are optimised to keep radiation doses as low as reasonably practicable, consistent with the intended clinical task. However, the complexity of modern CT equipment can make this task difficult to achieve in practice. Recent results of local patient dose audits have shown discrepancies between two Philips CT scanners that use the DoseRight 2.0 automatic exposure control (AEC) system in the 'automatic' mode of operation. The use of this system can result in drifting dose and image quality performance over time as it is designed to evolve based on operator technique. The purpose of this study was to develop a practical technique for configuring examination protocols on four CT scanners that use the DoseRight 2.0 AEC system in the 'manual' mode of operation. This method used a uniform phantom to generate reference images which form the basis for how the AEC system calculates exposure factors for any given patient. The results of this study have demonstrated excellent agreement in the configuration of the CT scanners in terms of average patient dose and image quality when using this technique. This work highlights the importance of CT protocol harmonisation in a modern Radiology department to ensure both consistent image quality and radiation dose. Following this study, the average radiation dose for a range of CT examinations has been reduced without any negative impact on clinical image quality.

Occupational physical activity assessment for chronic disease prevention and management: A review of methods for both occupational health practitioners and researchers.

PubMed

Scott, Kenneth A; Browning, Raymond C

2016-01-01

Occupational physical activity (OPA) is an occupational exposure that impacts worker health. OPA is amenable to measurement and modification through the hierarchy of controls. Occupational exposure scientists have roles in addressing inadequate physical activity, as well as excessive or harmful physical activity. Occupational health researchers can contribute to the development of novel OPA exposure assessment techniques and to epidemiologic studies examining the health impacts of physical activity at work. Occupational health practitioners stand to benefit from understanding the strengths and limitations of physical activity measurement approaches, such as accelerometers in smartphones, which are already ubiquitous in many workplaces and in some worksite health programs. This comprehensive review of the literature provides an overview of physical activity monitoring for occupational exposure scientists. This article summarizes data on the public health implications of physical activity at work, highlighting complex relationships with common chronic diseases. This article includes descriptions of several techniques that have been used to measure physical activity at work and elsewhere, focusing in detail on pedometers, accelerometers, and Global Positioning System technology. Additional subjective and objective measurement strategies are described as well.

Comparison of dual and single exposure techniques in dual-energy chest radiography.

PubMed

Ho, J T; Kruger, R A; Sorenson, J A

1989-01-01

Conventional chest radiography is the most effective tool for lung cancer detection and diagnosis; nevertheless, a high percentage of lung cancer tumors are missed because of the overlap of lung nodule image contrast with bone image contrast in a chest radiograph. Two different energy subtraction strategies, dual exposure and single exposure techniques, were studied for decomposing a radiograph into bone-free and soft tissue-free images to address this problem. For comparing the efficiency of these two techniques in lung nodule detection, the performances of the techniques were evaluated on the basis of residual tissue contrast, energy separation, and signal-to-noise ratio. The evaluation was based on both computer simulation and experimental verification. The dual exposure technique was found to be better than the single exposure technique because of its higher signal-to-noise ratio and greater residual tissue contrast. However, x-ray tube loading and patient motion are problems.

Use of EPR Spin-Trapping Techniques to Detect Radicals from Rat Lung Lavage Fluid Following Sulfur Mustard Vapor Exposure

DTIC Science & Technology

1993-05-13

lung injury. Anesthetized rats were intratracheally intubated and exposed to 0.35 mg HD vapor over 50 min, Immediately, 1 hr or 24 hr after exposure...lungs were lavaged with the spin trap, alpha-phenyl-t-butyl nitrone (PBN; 0.35 mg/ml). Recovered lavage fluid was assayed by EPR spectroscopy for...in EtOH (100 Ml), or EtOH alone (control), was placed in a water Jacketed (37° C) vapor generator and the rats .ere exposed for 50 min. by which time

Maternal mobile phone exposure alters intrinsic electrophysiological properties of CA1 pyramidal neurons in rat offspring.

PubMed

Razavinasab, Moazamehosadat; Moazzami, Kasra; Shabani, Mohammad

2016-06-01

Some studies have shown that exposure to electromagnetic field (EMF) may result in structural damage to neurons. In this study, we have elucidated the alteration in the hippocampal function of offspring Wistar rats (n = 8 rats in each group) that were chronically exposed to mobile phones during their gestational period by applying behavioral, histological, and electrophysiological tests. Rats in the EMF group were exposed to 900 MHz pulsed-EMF irradiation for 6 h/day. Whole cell recordings in hippocampal pyramidal cells in the mobile phone groups did show a decrease in neuronal excitability. Mobile phone exposure was mostly associated with a decrease in the number of action potentials fired in spontaneous activity and in response to current injection in both male and female groups. There was an increase in the amplitude of the afterhyperpolarization (AHP) in mobile phone rats compared with the control. The results of the passive avoidance and Morris water maze assessment of learning and memory performance showed that phone exposure significantly altered learning acquisition and memory retention in male and female rats compared with the control rats. Light microscopy study of brain sections of the control and mobile phone-exposed rats showed normal morphology.Our results suggest that exposure to mobile phones adversely affects the cognitive performance of both female and male offspring rats using behavioral and electrophysiological techniques. © The Author(s) 2014.

Emesis, radiation exposure, and local cerebral blood flow in the ferret

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tuor, U.I.; Kondysar, M.H.; Harding, R.K.

1988-06-01

We examined the sensitivity of the ferret to emetic stimuli and the effect of radiation exposure near the time of emesis on local cerebral blood flow. Ferrets vomited following the administration of either apomorphine (approx 45% of the ferrets tested) or peptide YY (approx 36% of those tested). Exposure to radiation was a very potent emetic stimulus, but vomiting could be prevented by restraint of the hindquarters of the ferret. Local cerebral blood flow was measured using a quantitative autoradiographic technique and with the exception of several regions in the telencephalon and cerebellum, local cerebral blood flow in the ferretmore » was similar to that in the rat. In animals with whole-body exposure to moderate levels of radiation (4 Gy of /sup 137/Cs), mean arterial blood pressure was similar to that in the control group. However, 15-25 min following irradiation there was a general reduction of local cerebral blood flow ranging from 7 to 33% of that in control animals. These cerebral blood flow changes likely correspond to a reduced activation of the central nervous system.« less

PCB remediation in schools: a review.

PubMed

Brown, Kathleen W; Minegishi, Taeko; Cummiskey, Cynthia Campisano; Fragala, Matt A; Hartman, Ross; MacIntosh, David L

2016-02-01

Growing awareness of polychlorinated biphenyls (PCBs) in legacy caulk and other construction materials of schools has created a need for information on best practices to control human exposures and comply with applicable regulations. A concise review of approaches and techniques for management of building-related PCBs is the focus of this paper. Engineering and administrative controls that block pathways of PCB transport, dilute concentrations of PCBs in indoor air or other exposure media, or establish uses of building space that mitigate exposure can be effective initial responses to identification of PCBs in a building. Mitigation measures also provide time for school officials to plan a longer-term remediation strategy and to secure the necessary resources. These longer-term strategies typically involve removal of caulk or other primary sources of PCBs as well as nearby masonry or other materials contaminated with PCBs by the primary sources. The costs of managing PCB-containing building materials from assessment through ultimate disposal can be substantial. Optimizing the efficacy and cost-effectiveness of remediation programs requires aligning a thorough understanding of sources and exposure pathways with the most appropriate mitigation and abatement methods.

Real-time measurement of dust in the workplace using video exposure monitoring: Farming to pharmaceuticals

NASA Astrophysics Data System (ADS)

Walsh, P. T.; Forth, A. R.; Clark, R. D. R.; Dowker, K. P.; Thorpe, A.

2009-02-01

Real-time, photometric, portable dust monitors have been employed for video exposure monitoring (VEM) to measure and highlight dust levels generated by work activities, illustrate dust control techniques, and demonstrate good practice. Two workplaces, presenting different challenges for measurement, were used to illustrate the capabilities of VEM: (a) poultry farming activities and (b) powder transfer operations in a pharmaceutical company. For the poultry farm work, the real-time monitors were calibrated with respect to the respirable and inhalable dust concentrations using cyclone and IOM reference samplers respectively. Different rankings of exposure for typical activities were found on the small farm studied here compared to previous exposure measurements at larger poultry farms: these were mainly attributed to the different scales of operation. Large variations in the ratios of respirable, inhalable and real-time monitor TWA concentrations of poultry farm dust for various activities were found. This has implications for the calibration of light-scattering dust monitors with respect to inhalable dust concentration. In the pharmaceutical application, the effectiveness of a curtain barrier for dust control when dispensing powder in a downflow booth was rapidly demonstrated.

Measurement techniques of exposure to nanomaterials in the workplace for low- and medium-income countries: A systematic review.

PubMed

Boccuni, Fabio; Gagliardi, Diana; Ferrante, Riccardo; Rondinone, Bruna Maria; Iavicoli, Sergio

2017-10-01

Nanotechnology offers many opportunities but there is still considerable uncertainty about the health risks and how to assess these.In the field of risk analysis for workers potentially exposed to nano-objects and their agglomerates and aggregates (NOAA) different methodological approaches to measure airborne NOAA have been proposed.This study proposes a systematic review of scientific literature on occupational exposure to NOAA in the workplace with the aim to identify techniques of exposure measurement to be recommended in low- and medium-income countries.We gathered scientific papers reporting techniques of NOAA exposure measurements in the workplace, we summarized the data for each eligible technique according to PRISMA guidelines, and we rated the quality of evidence following an adapted GRADE approach.We found 69 eligible studies to be included in qualitative synthesis: the majority of studies reported a moderate quality and only two studies demonstrated the use of a high quality exposure measurement technique.The review demonstrates that a basic exposure measurement, i.e. evidence for the presence or absence of NOAA in the workplace air, can be achieved with moderate (40 techniques) to high (2 techniques) quality; comprehensive exposure measurement, that allow the quantification of NOAA in the workplace, can be achieved with moderate (11 techniques) to high (2 techniques) quality.The findings of the study also allowed to finalize a list of requirements that must be fulfilled by an effective measurement technique (either basic or comprehensive) and to highlight the main weaknesses that need to be tackled for an effective affordability evaluation of measurement techniques to be recommended in low- and medium-income countries. Copyright © 2017 Elsevier GmbH. All rights reserved.

An environmental transfer hub for multimodal atom probe tomography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perea, Daniel E.; Gerstl, Stephan S. A.; Chin, Jackson

Environmental control during transfer between instruments is required for specimens sensitive to air or thermal exposure to prevent morphological or chemical changes. Atom Probe Tomography is an expanding technique but commercial instruments remain limited to loading under ambient conditions. Here we describe a multifunctional environmental transfer hub allowing controlled cryogenic, atmospheric and vacuum transfer between an Atom Probe and other instruments containing separate chambers to allow downstream time-resolved in-situ studies.

Automating Microbial Directed Evolution For Bioengineering Applications

NASA Astrophysics Data System (ADS)

Lee, A.; Demachkie, I. S.; Sardesh, N.; Arismendi, D.; Ouandji, C.; Wang, J.; Blaich, J.; Gentry, D.

2016-12-01

From a micro-biology perspective, directed evolution is a technique that uses controlled environmental pressures to select for a desired phenotype. Directed evolution has the distinct advantage over rational design of not needing extensive knowledge of the genome or pathways associated with a microorganism to induce phenotypes. However, there are currently limitations to the applicability of this technique including being time-consuming, error-prone, and dependent on existing assays that may lack selectivity for the given phenotype. The AADEC (Autonomous Adaptive Directed Evolution Chamber) system is a proof-of-concept instrument to automate and improve the technique such that directed evolution can be used more effectively as a general bioengineering tool. A series of tests using the automated system and comparable by-hand survival assay measurements have been carried out using UV-C radiation and Escherichia coli cultures in order to demonstrate the advantages of the AADEC versus traditional implementations of directed evolution such as random mutagenesis. AADEC uses UV-C exposure as both a source of environmental stress and mutagenesis, so in order to evaluate the UV-C tolerance obtained from the cultures, a manual UV-C exposure survival assay was developed alongside the device to compare the survival fractions at a fixed dosage. This survival assay involves exposing E.coli to UV-C radiation using a custom-designed exposure hood to control the flux and dose. Surviving cells are counted then transferred to the next iteration and so on for several iterations to calculate the survival fractions for each exposure iteration. This survival assay primarily serves as a baseline for the AADEC device, allowing quantification of the differences between the AADEC system over the manual approach. The primary data of comparison is survival fractions; this is obtained by optical density and plate counts in the manual assay and by optical density growth curve fits pre- and post-exposure in the automated case. This data can then be compiled to calculate trends over the iterations to characterize increasing UV-C resistance of the E.coli strains. The observed trends are statistically indistinguishable through several iterations from both sources.

Dose Estimating Application Software Modification: Additional Function of a Size-Specific Effective Dose Calculator and Auto Exposure Control.

PubMed

Kobayashi, Masanao; Asada, Yasuki; Matsubara, Kosuke; Suzuki, Shouichi; Matsunaga, Yuta; Haba, Tomonobu; Kawaguchi, Ai; Daioku, Tomihiko; Toyama, Hiroshi; Kato, Ryoichi

2017-05-01

Adequate dose management during computed tomography is important. In the present study, the dosimetric application software ImPACT was added to a functional calculator of the size-specific dose estimate and was part of the scan settings for the auto exposure control (AEC) technique. This study aimed to assess the practicality and accuracy of the modified ImPACT software for dose estimation. We compared the conversion factors identified by the software with the values reported by the American Association of Physicists in Medicine Task Group 204, and we noted similar results. Moreover, doses were calculated with the AEC technique and a fixed-tube current of 200 mA for the chest-pelvis region. The modified ImPACT software could estimate each organ dose, which was based on the modulated tube current. The ability to perform beneficial modifications indicates the flexibility of the ImPACT software. The ImPACT software can be further modified for estimation of other doses. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Prenatal exposure to ethanol during late gestation facilitates operant self-administration of the drug in 5-day-old rats

PubMed Central

Miranda-Morales, Roberto Sebastián; Nizhnikov, Michael E.; Spear, Norman E.

2014-01-01

Prenatal ethanol exposure modifies postnatal affinity to the drug, increasing the probability of ethanol use and abuse. The present study tested developing rats (5-day-old) in a novel operant technique to assess the degree of ethanol self-administration as a result of prenatal exposure to low ethanol doses during late gestation. On a single occasion during each of gestational days 17–20, pregnant rats were intragastrically administered ethanol 1 g/kg, or water (vehicle). On postnatal day 5, pups were tested on a novel operant conditioning procedure in which they learned to touch a sensor to obtain 0.1% saccharin, 3% ethanol, or 5% ethanol. Immediately after a 15-min training session, a 6-min extinction session was given in which operant behavior had no consequence. Pups were positioned on a smooth surface and had access to a touch-sensitive sensor. Physical contact with the sensor activated an infusion pump, which served to deliver an intraoral solution as reinforcement (Paired group). A Yoked control animal evaluated at the same time received the reinforcer when its corresponding Paired pup touched the sensor. Operant behavior to gain access to 3% ethanol was facilitated by prenatal exposure to ethanol during late gestation. In contrast, operant learning reflecting ethanol reinforcement did not occur in control animals prenatally exposed to water only. Similarly, saccharin reinforcement was not affected by prenatal ethanol exposure. These results suggest that in 5-day-old rats, prenatal exposure to a low ethanol dose facilitates operant learning reinforced by intraoral administration of a low-concentration ethanol solution. This emphasizes the importance of intrauterine experiences with ethanol in later susceptibility to drug reinforcement. The present operant conditioning technique represents an alternative tool to assess self-administration and seeking behavior during early stages of development. PMID:24355072

Prenatal exposure to ethanol during late gestation facilitates operant self-administration of the drug in 5-day-old rats.

PubMed

Miranda-Morales, Roberto Sebastián; Nizhnikov, Michael E; Spear, Norman E

2014-02-01

Prenatal ethanol exposure modifies postnatal affinity to the drug, increasing the probability of ethanol use and abuse. The present study tested developing rats (5-day-old) in a novel operant technique to assess the degree of ethanol self-administration as a result of prenatal exposure to low ethanol doses during late gestation. On a single occasion during each of gestational days 17-20, pregnant rats were intragastrically administered ethanol 1 g/kg, or water (vehicle). On postnatal day 5, pups were tested on a novel operant conditioning procedure in which they learned to touch a sensor to obtain 0.1% saccharin, 3% ethanol, or 5% ethanol. Immediately after a 15-min training session, a 6-min extinction session was given in which operant behavior had no consequence. Pups were positioned on a smooth surface and had access to a touch-sensitive sensor. Physical contact with the sensor activated an infusion pump, which served to deliver an intraoral solution as reinforcement (Paired group). A Yoked control animal evaluated at the same time received the reinforcer when its corresponding Paired pup touched the sensor. Operant behavior to gain access to 3% ethanol was facilitated by prenatal exposure to ethanol during late gestation. In contrast, operant learning reflecting ethanol reinforcement did not occur in control animals prenatally exposed to water only. Similarly, saccharin reinforcement was not affected by prenatal ethanol exposure. These results suggest that in 5-day-old rats, prenatal exposure to a low ethanol dose facilitates operant learning reinforced by intraoral administration of a low-concentration ethanol solution. This emphasizes the importance of intrauterine experiences with ethanol in later susceptibility to drug reinforcement. The present operant conditioning technique represents an alternative tool to assess self-administration and seeking behavior during early stages of development. Published by Elsevier Inc.

Occupational exposure to silica in construction workers: a literature-based exposure database.

PubMed

Beaudry, Charles; Lavoué, Jérôme; Sauvé, Jean-François; Bégin, Denis; Senhaji Rhazi, Mounia; Perrault, Guy; Dion, Chantal; Gérin, Michel

2013-01-01

We created an exposure database of respirable crystalline silica levels in the construction industry from the literature. We extracted silica and dust exposure levels in publications reporting silica exposure levels or quantitative evaluations of control effectiveness published in or after 1990. The database contains 6118 records (2858 of respirable crystalline silica) extracted from 115 sources, summarizing 11,845 measurements. Four hundred and eighty-eight records represent summarized exposure levels instead of individual values. For these records, the reported summary parameters were standardized into a geometric mean and a geometric standard deviation. Each record is associated with 80 characteristics, including information on trade, task, materials, tools, sampling strategy, analytical methods, and control measures. Although the database was constructed in French, 38 essential variables were standardized and translated into English. The data span the period 1974-2009, with 92% of the records corresponding to personal measurements. Thirteen standardized trades and 25 different standardized tasks are associated with at least five individual silica measurements. Trade-specific respirable crystalline silica geometric means vary from 0.01 (plumber) to 0.30 mg/m³ (tunnel construction skilled labor), while tasks vary from 0.01 (six categories, including sanding and electrical maintenance) to 1.59 mg/m³ (abrasive blasting). Despite limitations associated with the use of literature data, this database can be analyzed using meta-analytical and multivariate techniques and currently represents the most important source of exposure information about silica exposure in the construction industry. It is available on request to the research community.

Working group written presentation: Solar radiation

NASA Technical Reports Server (NTRS)

Slemp, Wayne S.

1989-01-01

The members of the Solar Radiation Working Group arrived at two major solar radiation technology needs: (1) generation of a long term flight data base; and (2) development of a standardized UV testing methodology. The flight data base should include 1 to 5 year exposure of optical filters, windows, thermal control coatings, hardened coatings, polymeric films, and structural composites. The UV flux and wavelength distribution, as well as particulate radiation flux and energy, should be measured during this flight exposure. A standard testing methodology is needed to establish techniques for highly accelerated UV exposure which will correlate well with flight test data. Currently, UV can only be accelerated to about 3 solar constants and can correlate well with flight exposure data. With space missions to 30 years, acceleration rates of 30 to 100X are needed for efficient laboratory testing.

Susceptibility of linear and nonlinear otoacoustic emission components to low-dose styrene exposure.

PubMed

Tognola, G; Chiaramello, E; Sisto, R; Moleti, A

2015-03-01

To investigate potential susceptibility of active cochlear mechanisms to low-level styrene exposure by comparing TEOAEs in workers and controls. Two advanced analysis techniques were applied to detect sub-clinical changes in linear and nonlinear cochlear mechanisms of OAE generation: the wavelet transform to decompose TEOAEs into time-frequency components and extract signal-to-noise ratio and latency of each component, and the bispectrum to detect and extract nonlinear TEOAE contributions as quadratic frequency couplings (QFCs). Two cohorts of workers were examined: subjects exposed exclusively to styrene (N = 9), and subjects exposed to styrene and noise (N = 6). The control group was perfectly matched by age and sex to the exposed group. Exposed subjects showed significantly lowered SNR in TEOAE components at mid-to-high frequencies (above 1.6 kHz) and a shift of QFC distribution towards lower frequencies than controls. No systematic differences were observed in latency. Low-level styrene exposure may have induced a modification of cochlear functionality as concerns linear and nonlinear OAE generation mechanisms. The lack of change in latency seems to suggest that the OAE components, where generation region and latency are tightly coupled, may not have been affected by styrene and noise exposure levels considered here.

Dual hologram design study

NASA Technical Reports Server (NTRS)

Liu, H. K.

1978-01-01

A phase modulated triple exposure technique was incorporated into a holographic nondestructive test (HNDT) system. The technique was able to achieve a goal of simultaneously identifying the zero-order fringe and determining the direction of motion (or displacement). Basically, the technique involves the addition of one more exposure, during the loading of the tested object, to the conventional double-exposure hologram. A phase shifter is added to either the object beam or the reference beam during the second and third exposure. Theoretical analysis with the assistance of computer simulation illustrated the feasibility of implementing the phase modulation and triple-exposure in the HNDT systems. Main advantages of the technique are the enhancement of accuracy in data interpretation and a better determination of the nature of the flaws in the tested object.

Thermoelectric technique to precisely control hyperthermic exposures of human whole blood.

PubMed

DuBose, D A; Langevin, R C; Morehouse, D H

1996-12-01

The need in military research to avoid exposing humans to harsh environments and reduce animal use requires the development of in vitro models for the study of hyperthermic injury. A thermoelectric module (TEM) system was employed to heat human whole blood (HWB) in a manner similar to that experienced by heat-stroked rats. This system precisely and accurately replicated mild, moderate, and extreme heat-stress exposures. Temperature changes could be monitored without the introduction of a test sample thermistor, which reduced contamination problems. HWB with hematocrits of 45 or 50% had similar heating curves, indicating that the system compensated for differences in sample character. The unit's size permitted its containment within a standard carbon dioxide incubator to further control sample environment. These results indicate that the TEM system can precisely control temperature change in this heat stress in vitro model employing HWB. Information obtained from such a model could contribute to military preparedness.

Robot-assisted and conventional freehand pedicle screw placement: a systematic review and meta-analysis of randomized controlled trials.

PubMed

Gao, Shutao; Lv, Zhengtao; Fang, Huang

2018-04-01

Several studies have revealed that robot-assisted technique might improve the pedicle screw insertion accuracy, but owing to the limited sample sizes in the individual study reported up to now, whether or not robot-assisted technique is superior to conventional freehand technique is indefinite. Thus, we performed this systematic review and meta-analysis based on randomized controlled trials to assess which approach is better. Electronic databases including PubMed, EMBASE, CENTRAL, ISI Web of Science, CNKI and WanFang were systematically searched to identify potentially eligible articles. Main endpoints containing the accuracy of pedicle screw implantation and proximal facet joint violation were evaluated as risk ratio (RR) and the associated 95% confidence intervals (95% CIs), while radiation exposure and surgical duration were presented as mean difference (MD) or standard mean difference (SMD). Meta-analyses were performed using RevMan 5.3 software. Six studies involving 158 patients (688 pedicle screws) in robot-assisted group and 148 patients (672 pedicle screws) in freehand group were identified matching our study. The Grade A accuracy rate in robot-assisted group was superior to freehand group (RR 1.03, 95% CI 1.00, 1.06; P = 0.04), but the Grade A + B accuracy rate did not differ between the two groups (RR 1.01, 95% CI 0.99, 1.02; P = 0.29). With regard to proximal facet joint violation, the combined results suggested that robot-assisted group was associated with significantly fewer proximal facet joint violation than freehand group (RR 0.07, 95% CI 0.01, 0.55; P = 0.01). As was the radiation exposure, our findings suggested that robot-assisted technique could significantly reduce the intraoperative radiation time (MD - 12.38, 95% CI - 17.95, - 6.80; P < 0.0001) and radiation dosage (SMD - 0.64, 95% CI - 0.85, - 0.43; P < 0.00001). But the overall surgical duration was longer in robot-assisted group than conventional freehand group (MD 20.53, 95% CI 5.17, 35.90; P = 0.009). The robot-assisted technique was associated with equivalent accuracy rate of pedicle screw implantation, fewer proximal facet joint violation, less intraoperative radiation exposure but longer surgical duration than freehand technique. Powerful evidence relies on more randomized controlled trials with high quality and larger sample size in the future.

Overcoming Dynamic Disturbances in Imaging Systems

NASA Technical Reports Server (NTRS)

Young, Eric W.; Dente, Gregory C.; Lyon, Richard G.; Chesters, Dennis; Gong, Qian

2000-01-01

We develop and discuss a methodology with the potential to yield a significant reduction in complexity, cost, and risk of space-borne optical systems in the presence of dynamic disturbances. More robust systems almost certainly will be a result as well. Many future space-based and ground-based optical systems will employ optical control systems to enhance imaging performance. The goal of the optical control subsystem is to determine the wavefront aberrations and remove them. Ideally reducing an aberrated image of the object under investigation to a sufficiently clear (usually diffraction-limited) image. Control will likely be distributed over several elements. These elements may include telescope primary segments, telescope secondary, telescope tertiary, deformable mirror(s), fine steering mirror(s), etc. The last two elements, in particular, may have to provide dynamic control. These control subsystems may become elaborate indeed. But robust system performance will require evaluation of the image quality over a substantial range and in a dynamic environment. Candidate systems for improvement in the Earth Sciences Enterprise could include next generation Landsat systems or atmospheric sensors for dynamic imaging of individual, severe storms. The technology developed here could have a substantial impact on the development of new systems in the Space Science Enterprise; such as the Next Generation Space Telescope(NGST) and its follow-on the Next NGST. Large Interferometric Systems of non-zero field, such as Planet Finder and Submillimeter Probe of the Evolution of Cosmic Structure, could benefit. These systems most likely will contain large, flexible optomechanical structures subject to dynamic disturbance. Furthermore, large systems for high resolution imaging of planets or the sun from space may also benefit. Tactical and Strategic Defense systems will need to image very small targets as well and could benefit from the technology developed here. We discuss a novel speckle imaging technique with the potential to separate dynamic aberrations from static aberrations. Post-processing of a set of image data, using an algorithm based on this technique, should work for all but the lowest light levels and highest frequency dynamic environments. This technique may serve to reduce the complexity of the control system and provide for robust, fault-tolerant, reduced risk operation. For a given object, a short exposure image is "frozen" on the focal plane in the presence of the environmental disturbance (turbulence, jitter, etc.). A key factor is that this imaging data exhibits frame-to-frame linear shift invariance. Therefore, although the Point Spread Function is varying from frame to frame, the source is fixed; and each short exposure contains object spectrum data out to the diffraction limit of the imaging system. This novel speckle imaging technique uses the Knox-Thompson method. The magnitude of the complex object spectrum is straightforward to determine by well-established approaches. The phase of the complex object spectrum is decomposed into two parts. One is a single-valued function determined by the divergence of the optical phase gradient. The other is a multi-valued function determined by the circulation of the optical phase gradient-"hidden phase." Finite difference equations are developed for the phase. The novelty of this approach is captured in the inclusion of this "hidden phase." This technique allows the diffraction-limited reconstruction of the object from the ensemble of short exposure frames while simultaneously estimating the phase as a function of time from a set of exposures.

Overcoming Dynamic Disturbances in Imaging Systems

NASA Technical Reports Server (NTRS)

Young, Eric W.; Dente, Gregory C.; Lyon, Richard G.; Chesters, Dennis; Gong, Qian

2000-01-01

We develop and discuss a methodology with the potential to yield a significant reduction in complexity, cost, and risk of space-borne optical systems in the presence of dynamic disturbances. More robust systems almost certainly will be a result as well. Many future space-based and ground-based optical systems will employ optical control systems to enhance imaging performance. The goal of the optical control subsystem is to determine the wavefront aberrations and remove them. Ideally reducing an aberrated image of the object under investigation to a sufficiently clear (usually diffraction-limited) image. Control will likely be distributed over several elements. These elements may include telescope primary segments, telescope secondary, telescope tertiary, deformable mirror(s), fine steering mirror(s), etc. The last two elements, in particular, may have to provide dynamic control. These control subsystems may become elaborate indeed. But robust system performance will require evaluation of the image quality over a substantial range and in a dynamic environment. Candidate systems for improvement in the Earth Sciences Enterprise could include next generation Landsat systems or atmospheric sensors for dynamic imaging of individual, severe storms. The technology developed here could have a substantial impact on the development of new systems in the Space Science Enterprise; such as the Next Generation Space Telescope(NGST) and its follow-on the Next NGST. Large Interferometric Systems of non-zero field, such as Planet Finder and Submillimeter Probe of the Evolution of Cosmic Structure, could benefit. These systems most likely will contain large, flexible optormechanical structures subject to dynamic disturbance. Furthermore, large systems for high resolution imaging of planets or the sun from space may also benefit. Tactical and Strategic Defense systems will need to image very small targets as well and could benefit from the technology developed here. We discuss a novel speckle imaging technique with the potential to separate dynamic aberrations from static aberrations. Post-processing of a set of image data, using an algorithm based on this technique, should work for all but the lowest light levels and highest frequency dynamic environments. This technique may serve to reduce the complexity of the control system and provide for robust, fault-tolerant, reduced risk operation. For a given object, a short exposure image is "frozen" on the focal plane in the presence of the environmental disturbance (turbulence, jitter, etc.). A key factor is that this imaging data exhibits frame-to-frame linear shift invariance. Therefore, although the Point Spread Function is varying from frame to frame, the source is fixed; and each short exposure contains object spectrum data out to the diffraction limit of the imaging system. This novel speckle imaging technique uses the Knox-Thompson method. The magnitude of the complex object spectrum is straightforward to determine by well-established approaches. The phase of the complex object spectrum is decomposed into two parts. One is a single-valued function determined by the divergence of the optical phase gradient. The other is a multi-valued function determined by, the circulation of the optical phase gradient-"hidden phase." Finite difference equations are developed for the phase. The novelty of this approach is captured in the inclusion of this "hidden phase." This technique allows the diffraction-limited reconstruction of the object from the ensemble of short exposure frames while simultaneously estimating the phase as a function of time from a set of exposures.

Emotional Freedom Techniques for Anxiety: A Systematic Review With Meta-analysis.

PubMed

Clond, Morgan

2016-05-01

Emotional Freedom Technique (EFT) combines elements of exposure and cognitive therapies with acupressure for the treatment of psychological distress. Randomized controlled trials retrieved by literature search were assessed for quality using the criteria developed by the American Psychological Association's Division 12 Task Force on Empirically Validated Treatments. As of December 2015, 14 studies (n = 658) met inclusion criteria. Results were analyzed using an inverse variance weighted meta-analysis. The pre-post effect size for the EFT treatment group was 1.23 (95% confidence interval, 0.82-1.64; p < 0.001), whereas the effect size for combined controls was 0.41 (95% confidence interval, 0.17-0.67; p = 0.001). Emotional freedom technique treatment demonstrated a significant decrease in anxiety scores, even when accounting for the effect size of control treatment. However, there were too few data available comparing EFT to standard-of-care treatments such as cognitive behavioral therapy, and further research is needed to establish the relative efficacy of EFT to established protocols.

Exposure of healthy subjects with emissions from a gas metal arc welding process: part 3--biological effect markers and lung function.

PubMed

Brand, P; Bischof, K; Siry, L; Bertram, J; Schettgen, T; Reisgen, U; Kraus, T; Gube, M

2013-01-01

Metal active gas welding (MAG) is a widely-used welding technique resulting in high emissions of welding fume particles. This study investigated whether short-term exposure to these fume particles results in changes in lung function and early stages of inflammatory reactions. Twelve healthy, young male subjects were exposed to MAG fumes for 6 h with three different exposure concentrations in a three-fold cross-over study design. Exposure was performed in the "Aachen Workplace Simulation Laboratory" under controlled conditions with constant fume concentration. Fume concentrations were 0, 1, and 2.5 mg m(-3) in randomized order. Before and after each exposure, spirometry, and impulse oscillometry were performed and breath condensate samples were collected in order to quantify inflammatory markers like Nitrate, Nitrite, Nitrotyrosine, Hydroxyprolin and Malondialdehyde. A significant dependency on the exposure concentration could not be established for any of the endpoint parameters. In healthy, young subjects neither changes in spirometry nor changes in inflammatory markers measured in exhaled breath condensate could be detected after short-term exposure.

Disparities in Exposure to Automobile and Truck Traffic and Vehicle Emissions Near the Los Angeles–Long Beach Port Complex

PubMed Central

Li, Wei; Wu, Jun

2014-01-01

Objectives. We assessed how traffic and mobile-source air pollution impacts are distributed across racial/ethnic and socioeconomically diverse groups in port-adjacent communities in southern Los Angeles County, which may experience divergent levels of exposure to port-related heavy-duty diesel truck traffic because of existing residential and land use patterns. Methods. We used spatial regression techniques to assess the association of neighborhood racial/ethnic and socioeconomic composition with residential parcel-level traffic and vehicle-related fine particulate matter exposure after accounting for built environment and land use factors. Results. After controlling for factors associated with traffic generation, we found that a higher percentage of nearby Black and Asian/Pacific Islander residents was associated with higher exposure, a higher percentage of Hispanic residents was associated with higher traffic exposure but lower vehicle particulate matter exposure, and areas with lower socioeconomic status experienced lower exposure. Conclusions. Disparities in traffic and vehicle particulate matter exposure are nuanced depending on the exposure metric used, the distribution of the traffic and emissions, and pollutant dispersal patterns. Future comparative research is needed to assess potential disparities in other transportation and goods movement corridors. PMID:23678919

Disparities in exposure to automobile and truck traffic and vehicle emissions near the Los Angeles-Long Beach port complex.

PubMed

Houston, Douglas; Li, Wei; Wu, Jun

2014-01-01

We assessed how traffic and mobile-source air pollution impacts are distributed across racial/ethnic and socioeconomically diverse groups in port-adjacent communities in southern Los Angeles County, which may experience divergent levels of exposure to port-related heavy-duty diesel truck traffic because of existing residential and land use patterns. We used spatial regression techniques to assess the association of neighborhood racial/ethnic and socioeconomic composition with residential parcel-level traffic and vehicle-related fine particulate matter exposure after accounting for built environment and land use factors. After controlling for factors associated with traffic generation, we found that a higher percentage of nearby Black and Asian/Pacific Islander residents was associated with higher exposure, a higher percentage of Hispanic residents was associated with higher traffic exposure but lower vehicle particulate matter exposure, and areas with lower socioeconomic status experienced lower exposure. Disparities in traffic and vehicle particulate matter exposure are nuanced depending on the exposure metric used, the distribution of the traffic and emissions, and pollutant dispersal patterns. Future comparative research is needed to assess potential disparities in other transportation and goods movement corridors.

Preliminary Evidence Supports Modification of Retraction Technique to Prevent Needlestick Injuries

PubMed Central

Fa, Bernadette Alvear; Cuny, Eve

2016-01-01

A modified retraction technique was introduced into the DDS degree preclinical anesthesia course in 2011 with the goal of reducing needlestick exposure incidents. In numerous studies of dental exposures, injuries from dental anesthetic needles account for the highest proportion of all exposures. The purpose of this study was to assess the preliminary impact of a modified retraction technique on the incidence of blood and body fluids (BBF) exposure incidents associated with needles during injection. Data from evaluations of students from 2014 and 2015 were obtained and tracked to determine whether the modified retraction technique was “excellent,” “clinically acceptable,” or “clinically unacceptable.” Data were collected to determine if the patient perceived the modified retraction technique as “comfortable” or “correctable when addressed” to help improve student technique for future injections. Likewise, data from the blood-borne exposure database where all information related to BBF exposures is recorded were reviewed and the information separated by year and class. This study presents preliminary data only and because of the small sample size does not lend itself to validation by statistical analysis. However, the technique effectively removes the operator's hand from the field during injection, reducing the risk of accidental intraoral needlestick to the nondominant hand of the operator. PMID:27973940

Double exposure technique for 45nm node and beyond

NASA Astrophysics Data System (ADS)

Hsu, Stephen; Park, Jungchul; Van Den Broeke, Douglas; Chen, J. Fung

2005-11-01

The technical challenges in using F2 lithography for the 45nm node, along with the insurmountable difficulties in EUV lithography, has driven the semiconductor chipmaker into the low k1 lithography era under the pressure of ever decreasing feature sizes. Extending lithography towards lower k1 puts heavy demand on the resolution enhancement technique (RET), exposure tool, and the need for litho friendly design. Hyper numerical aperture (NA) exposure tools, immersion, and double exposure techniques (DET's) are the promising methods to extend lithography manufacturing to the 45nm node at k1 factors below 0.3. Scattering bars (SB's) have become an integral part of the lithography process as chipmakers move to production at ever lower k1 factors. To achieve better critical dimension (CD) control, polarization is applied to enhance the image contrast in the preferential imaging orientation, which increases the risk of SB printability. The optimum SB width is approximately (0.20 ~ 0.25)*(λ/NA). When the SB width becomes less than the exposure wavelength on the 4X mask, Kirchhoff's scalar theory under predicts the SB intensity. The optical weighting factor of the SB increases (Figure 1b) and the SB's become more susceptible to printing. Meanwhile, under hyper NA conditions, the effectiveness of "subresolution" SB's is significantly diminished. A full-sized scattering bars (FSB) scheme becomes necessary. Double exposure methods, such as using ternary 6% attenuated PSM (attPSM) for DDL, are good imaging solutions that can reach and likely go beyond the 45nm node. Today DDL, using binary chrome masks, is capable of printing 65 nm device patterns. In this work, we investigate the use of DET with 6% attPSM masks to target 45nm node device. The SB scalability and printability issues can be taken cared of by using "mutual trimming", i.e., with the combined energy from the two exposures. In this study, we share our findings of using DET to pattern a 45nm node device design with polarization and immersion. We also explore other double patterning methods which in addition to having two exposures, incorporates double coat/developing/etch processing to break the 0.25 k1 barrier.

Electronic Flash In Data Acquisition

NASA Astrophysics Data System (ADS)

Miller, C. E.

1982-02-01

Photographic acquisition of data often may be simplified, or the data quality improved upon by employing electronic flash sources with traditional equipment or techniques. The relatively short flash duration compared to movie camera shutters, or to the long integration time of video camera provides improved spatial resolution through blur reduction, particularly important as image movement becomes a significant fraction of film format dimension. Greater accuracy typically is achieved in velocity and acceleration determinations by using a stroboscopic light source rather than a movie camera frame-rate control as a time standard. Electrical efficiency often is an important advantage of electronic flash sources since almost any necessary light level for exposure may be produced, yet the source typically is "off" most of the time. Various synchronization techniques greatly expand the precise control of exposure. Biomechanical and sports equipment studies may involve velocities up to 200 feet-per-second, and often will have associated very rapid actions of interest. The need for brief exposures increases H.s one "ZOOMS in on the action." In golf, for example, the swing may be examined using 100 microsecond (Us) flashes at rates of 60 or 120 flashes-per-second (FPS). Accurate determination of linear and rotational velocity of the ball requires 10 Us flashes at 500-1,000 FPS, while sub-Us flashes at 20,000-50,000 FPS are required to resolve the interaction of the ball and the club, head. Some seldom. used techniques involving streak photography are described, with enhanced results obtained by combining strobe with the usual continuous light source. The combination of strobe and a fast electro-mechanical shutter is considered for Us photography under daylight conditions.

CT Dose Optimization in Pediatric Radiology: A Multiyear Effort to Preserve the Benefits of Imaging While Reducing the Risks.

PubMed

Greenwood, Taylor J; Lopez-Costa, Rodrigo I; Rhoades, Patrick D; Ramírez-Giraldo, Juan C; Starr, Matthew; Street, Mandie; Duncan, James; McKinstry, Robert C

2015-01-01

The marked increase in radiation exposure from medical imaging, especially in children, has caused considerable alarm and spurred efforts to preserve the benefits but reduce the risks of imaging. Applying the principles of the Image Gently campaign, data-driven process and quality improvement techniques such as process mapping and flowcharting, cause-and-effect diagrams, Pareto analysis, statistical process control (control charts), failure mode and effects analysis, "lean" or Six Sigma methodology, and closed feedback loops led to a multiyear program that has reduced overall computed tomographic (CT) examination volume by more than fourfold and concurrently decreased radiation exposure per CT study without compromising diagnostic utility. This systematic approach involving education, streamlining access to magnetic resonance imaging and ultrasonography, auditing with comparison with benchmarks, applying modern CT technology, and revising CT protocols has led to a more than twofold reduction in CT radiation exposure between 2005 and 2012 for patients at the authors' institution while maintaining diagnostic utility. (©)RSNA, 2015.

Impacts of Mercury Pollution Controls on Atmospheric Mercury Concentration and Occupational Mercury Exposure in a Hospital.

PubMed

Li, Ping; Yang, Yan; Xiong, Wuyan

2015-12-01

Mercury (Hg) and Hg-containing products are used in a wide range of settings in hospitals. Hg pollution control measures were carried out in the pediatric ward of a hospital to decrease the possibility of Hg pollution occurring and to decrease occupational Hg exposure. Total gaseous Hg (TGM) concentrations in the pediatric ward and hair and urine Hg concentrations for the pediatric staff were determined before and after the Hg pollution control measures had been implemented. A questionnaire survey performed indicated that the pediatric staff had little understanding of Hg pollution and that appropriate disposal techniques were not always used after Hg leakage. TGM concentrations in the pediatric ward and urine Hg (UHg) concentrations for the pediatric staff were 25.7 and 22.2% lower, respectively, after the Hg pollution control measures had been implemented than before, which indicated that the control measures were effective. However, TGM concentrations in the pediatric ward remained significantly higher than background concentrations and UHg concentrations for the pediatric staff were remained significantly higher than the concentrations in control group, indicating continued existence of certain Hg pollution.

Changes in Serum Triiodothyronine Kinetics and Hepatic Type I 5’- Deiodinase Activity of Cold-Exposed Swine

DTIC Science & Technology

1994-01-01

A cold stimulus and control swine that we provide using NC techniques are fixed T4 replacement in hypothyroid animals increases similar to canine and...accounted hyperthyroidism, decreased with hypothyroidism , and for in earlier reports (Fig. 2) (5, 9). The values for variable with cold exposure (20, 21

Counterbalancing in smoking cue research: a critical analysis.

PubMed

Sayette, Michael A; Griffin, Kasey M; Sayers, W Michael

2010-11-01

Cue exposure research has been used to examine key issues in smoking research, such as predicting relapse, testing new medications, investigating the neurobiology of nicotine dependence, and examining reactivity among smokers with comorbid psychopathologies. Determining the order that cues are presented is one of the most critical steps in the design of these investigations. It is widely assumed that cue exposure studies should counterbalance the order in which smoking and control (neutral) cues are presented. This article examines the premises underlying the use of counterbalancing in experimental research, and it evaluates the degree to which counterbalancing is appropriate in smoking cue exposure studies. We reviewed the available literature on the use of counterbalancing techniques in human smoking cue exposure research. Many studies counterbalancing order of cues have not provided critical analyses to determine whether this approach was appropriate. Studies that have reported relevant data, however, suggest that order of cue presentation interacts with type of cue (smoking vs. control), which raises concerns about the utility of counterbalancing. Primarily, this concern arises from potential carryover effects, in which exposure to smoking cues affects subsequent responding to neutral cues. Cue type by order of cue interactions may compromise the utility of counterbalancing. Unfortunately, there is no obvious alternative that is optimal across studies. Strengths and limitations of several alternative designs are considered, and key questions are identified to advance understanding of the optimal conditions for conducting smoking cue exposure studies.

Cardiac remodeling in preterm infants with prolonged exposure to a patent ductus arteriosus.

PubMed

de Waal, Koert; Phad, Nilkant; Collins, Nick; Boyle, Andrew

2017-05-01

Sustained volume load due to a patent ductus arteriosus (PDA) leads to cardiac remodeling. Remodeling changes can become pathological and are associated with cardiovascular disease progression. Data on remodeling changes in preterm infants is not available. Clinical and echocardiography data were collected in preterm infants <30 weeks gestation on postnatal day 3 and then every 7-14 days until closure of the ductus arteriosus. Images were analyzed using conventional techniques and speckle tracking. Remodeling changes of infants with prolonged (>14 days) exposure to a PDA were compared to control infants without a PDA. Thirty out of 189 infants had prolonged exposure to a PDA. The left heart remodeled to a larger and more spherical shape and thus significantly increased in volume. Most changes occurred in the first 4 weeks, plateaued, and then returned to control values. Systolic function and estimates of filling pressure increased and effective arterial elastance reduced with a PDA, however contractility was unchanged. Wall thickness increased after 4 weeks of increased volume exposure. The preterm PDA induces early and significant remodeling of the left heart. A compensated cardiac physiology was seen with preserved systolic function, suggesting adaptive rather than pathological remodeling changes with prolonged exposure to a PDA. © 2017 Wiley Periodicals, Inc.

Elucidating Microbial Adaptation Dynamics via Autonomous Exposure and Sampling

NASA Technical Reports Server (NTRS)

Grace, Joseph M.; Verseux, Cyprien; Gentry, Diana; Moffet, Amy; Thayabaran, Ramanen; Wong, Nathan; Rothschild, Lynn

2013-01-01

The adaptation of micro-organisms to their environments is a complex process of interaction between the pressures of the environment and of competition. Reducing this multifactorial process to environmental exposure in the laboratory is a common tool for elucidating individual mechanisms of evolution, such as mutation rates. Although such studies inform fundamental questions about the way adaptation and even speciation occur, they are often limited by labor-intensive manual techniques. Current methods for controlled study of microbial adaptation limit the length of time, the depth of collected data, and the breadth of applied environmental conditions. Small idiosyncrasies in manual techniques can have large effects on outcomes; for example, there are significant variations in induced radiation resistances following similar repeated exposure protocols. We describe here a project under development to allow rapid cycling of multiple types of microbial environmental exposure. The system allows continuous autonomous monitoring and data collection of both single species and sampled communities, independently and concurrently providing multiple types of controlled environmental pressure (temperature, radiation, chemical presence or absence, and so on) to a microbial community in dynamic response to the ecosystem's current status. When combined with DNA sequencing and extraction, such a controlled environment can cast light on microbial functional development, population dynamics, inter- and intra-species competition, and microbe-environment interaction. The project's goal is to allow rapid, repeatable iteration of studies of both natural and artificial microbial adaptation. As an example, the same system can be used both to increase the pH of a wet soil aliquot over time while periodically sampling it for genetic activity analysis, or to repeatedly expose a culture of bacteria to the presence of a toxic metal, automatically adjusting the level of toxicity based on the number or growth rate of surviving cells. We are on our second prototype iteration, with demonstrated functions of microbial growth monitoring and dynamic exposure to UV-C radiation and temperature. We plan to add functionality for general chemical presence or absence by Nov. 2013. By making the project low-cost and open-source, we hope to encourage others to use it as a basis for future development of a common microbial environmental adaptation testbed.

New developments in exposure assessment: the impact on the practice of health risk assessment and epidemiological studies.

PubMed

Nieuwenhuijsen, Mark; Paustenbach, Dennis; Duarte-Davidson, Raquel

2006-12-01

The field of exposure assessment has matured significantly over the past 10-15 years. Dozens of studies have measured the concentrations of numerous chemicals in many media to which humans are exposed. Others have catalogued the various exposure pathways and identified typical values which can be used in the exposure calculations for the general population such as amount of water or soil ingested per day or the percent of a chemical than can pass through the skin. In addition, studies of the duration of exposure for many tasks (e.g. showering, jogging, working in the office) have been conducted which allow for more general descriptions of the likely range of exposures. All of this information, as well as the development of new and better models (e.g. air dispersion or groundwater models), allow for better estimates of exposure. In addition to identifying better exposure factors, and better mathematical models for predicting the aerial distribution of chemicals, the conduct of simulation studies and dose-reconstruction studies can offer extraordinary opportunities for filling in data gaps regarding historical exposures which are critical to improving the power of epidemiology studies. The use of probabilistic techniques such as Monte Carlo analysis and Bayesian statistics have revolutionized the practice of exposure assessment and has greatly enhanced the quality of the risk characterization. Lastly, the field of epidemiology is about to undergo a sea change with respect to the exposure component because each year better environmental and exposure models, statistical techniques and new biological monitoring techniques are being introduced. This paper reviews these techniques and discusses where additional research is likely to pay a significant dividend. Exposure assessment techniques are now available which can significantly improve the quality of epidemiology and health risk assessment studies and vastly improve their usefulness. As more quantitative exposure components can now be incorporated into these studies, they can be better used to identify safe levels of exposure using customary risk assessment methodologies. Examples are drawn from both environmental and occupational studies illustrating how these techniques have been used to better understand exposure to specific chemicals. Some thoughts are also presented on what lessons have been learned about conducting exposure assessment for health risk assessments and epidemiological studies.

Evidence for Altered Hippocampal Volume and Brain Metabolites in Workers Occupationally Exposed to Lead: A Study by Magnetic Resonance Imaging and 1H Magnetic Resonance Spectroscopy

PubMed Central

Jiang, Yue-Ming; Long, Li-Ling; Zhu, Xia-Yan; Zheng, Hong; Fu, Xue; Ou, Shi-Yan; Wei, Dong-Lu; Zhou, Hai-Lin; Zheng, Wei

2008-01-01

Environmental and occupational exposure to lead (Pb) remains to be a major public health issue. The purpose of this cross-sectional study was to use non-invasive magnetic resonance imaging (MRI) and proton magnetic resonance spectroscopy (1H MRS) techniques to investigate whether chronic exposure to Pb in an occupational setting altered brain structure and function of Pb-exposed workers. The Pb-exposed group consisted of 15 workers recruited from either a Pb-smelting factory or a Pb-battery manufacturer. The control group had 19 healthy volunteers who had no history of Pb exposure in working environment or at home. The average airborne Pb concentrations in fume and dust were 0.43 mg/m3 and 0.44 mg/m3, respectively in the smeltery, and 0.10 mg/m3 and 1.06 mg/m3, respectively in the Pb battery workshop. The average blood Pb concentrations (BPb) in Pb-exposed and control workers were 63.5 µg/dL and 8.7 µg/dL, respectively. The MRI examination showed that brain hippocampal volume among Pb-exposed workers was significantly diminished in comparison to age-matched control subjects (p<0.01), although the extent of this reduction was relatively small (5–6% of the control values). Linear regression analyses revealed significant inverse associations between BPb and the decreased hippocampal volume on both sides of brain hemisphere. Among five brain metabolites investigated by MRS, i.e., N-acetyl-aspartate (NAA), creatine (Cr), choline (Cho), inosine (mI), glutamate/glutamine (Glx) and lipids (Lip), a significant decrease in NAA/Cr ratio (7% of controls, p<0.05) and a remarkable increase in Lip/Cr ratio (40%, p<0.01) were observed in the brains of Pb-exposed workers as compared to controls. Furthermore, the increased Lip/Cr ratio was significantly associated with BPb (r = 0.46, p<0.01). Taken together, this study suggests that occupational exposure to Pb may cause subtle structural and functional alteration in human brains. The MRI and MRS brain imaging techniques can be used as the noninvasive means to evaluate Pb-induced neurotoxicity. PMID:18692119

Synchrotron macro ATR-FTIR microspectroscopic analysis of silica nanoparticle-embedded polyester coated steel surfaces subjected to prolonged UV and humidity exposure

PubMed Central

Vongsvivut, Jitraporn; Truong, Vi Khanh; Al Kobaisi, Mohammad; Maclaughlin, Shane; Tobin, Mark J.; Crawford, Russell J.

2017-01-01

Surface modification of polymers and paints is a popular and effective way to enhance the properties of these materials. This can be achieved by introducing a thin coating that preserves the bulk properties of the material, while protecting it from environmental exposure. Suitable materials for such coating technologies are inorganic oxides, such as alumina, titania and silica; however, the fate of these materials during long-term environmental exposure is an open question. In this study, polymer coatings that had been enhanced with the addition of silica nanoparticles (SiO2NPs) and subsequently subjected to environmental exposure, were characterized both before and after the exposure to determine any structural changes resulting from the exposure. High-resolution synchrotron macro ATR-FTIR microspectroscopy and surface topographic techniques, including optical profilometry and atomic force microscopy (AFM), were used to determine the long-term effect of the environment on these dual protection layers after 3 years of exposure to tropical and sub-tropical climates in Singapore and Queensland (Australia). Principal component analysis (PCA) based on the synchrotron macro ATR-FTIR spectral data revealed that, for the 9% (w/w) SiO2NP/polymer coating, a clear discrimination was observed between the control group (no environmental exposure) and those samples subjected to three years of environmental exposure in both Singapore and Queensland. The PCA loading plots indicated that, over the three year exposure period, a major change occurred in the triazine ring vibration in the melamine resins. This can be attributed to the triazine ring being very sensitive to hydrolysis under the high humidity conditions in tropical/sub-tropical environments. This work provides the first direct molecular evidence, acquired using a high-resolution mapping technique, of the climate-induced chemical evolution of a polyester coating. The observed changes in the surface topography of the coating are consistent with the changes in chemical composition. PMID:29253012

Synchrotron macro ATR-FTIR microspectroscopic analysis of silica nanoparticle-embedded polyester coated steel surfaces subjected to prolonged UV and humidity exposure.

PubMed

Vongsvivut, Jitraporn; Truong, Vi Khanh; Al Kobaisi, Mohammad; Maclaughlin, Shane; Tobin, Mark J; Crawford, Russell J; Ivanova, Elena P

2017-01-01

Surface modification of polymers and paints is a popular and effective way to enhance the properties of these materials. This can be achieved by introducing a thin coating that preserves the bulk properties of the material, while protecting it from environmental exposure. Suitable materials for such coating technologies are inorganic oxides, such as alumina, titania and silica; however, the fate of these materials during long-term environmental exposure is an open question. In this study, polymer coatings that had been enhanced with the addition of silica nanoparticles (SiO2NPs) and subsequently subjected to environmental exposure, were characterized both before and after the exposure to determine any structural changes resulting from the exposure. High-resolution synchrotron macro ATR-FTIR microspectroscopy and surface topographic techniques, including optical profilometry and atomic force microscopy (AFM), were used to determine the long-term effect of the environment on these dual protection layers after 3 years of exposure to tropical and sub-tropical climates in Singapore and Queensland (Australia). Principal component analysis (PCA) based on the synchrotron macro ATR-FTIR spectral data revealed that, for the 9% (w/w) SiO2NP/polymer coating, a clear discrimination was observed between the control group (no environmental exposure) and those samples subjected to three years of environmental exposure in both Singapore and Queensland. The PCA loading plots indicated that, over the three year exposure period, a major change occurred in the triazine ring vibration in the melamine resins. This can be attributed to the triazine ring being very sensitive to hydrolysis under the high humidity conditions in tropical/sub-tropical environments. This work provides the first direct molecular evidence, acquired using a high-resolution mapping technique, of the climate-induced chemical evolution of a polyester coating. The observed changes in the surface topography of the coating are consistent with the changes in chemical composition.

Laser-induced fluorescence of space-exposed polyurethane

NASA Technical Reports Server (NTRS)

Hill, Ralph H., Jr.

1993-01-01

The object of this work was to utilize laser-induced fluorescence technique to characterize several samples of space-exposed polyurethane. These samples were flown on the Long Duration Exposure Facility (LDEF), which was in a shuttle-like orbit for nearly 6 years. Because of our present work to develop laser-induced-fluorescence inspection techniques for polymers, space-exposed samples and controls were lent to us for evaluation. These samples had been attached to the outer surface of LDEF; therefore, they were subjected to thermal cycling, solar ultraviolet radiation, vacuum, and atomic oxygen. It is well documented that atomic oxygen and ultraviolet exposure have detrimental effects on many polymers. This was a unique opportunity to make measurements on material that had been naturally degraded by an unusual environment. During our past work, data have come from artificially degraded samples and generally have demonstrated a correlation between laser-induced fluorescence and tensile strength or elasticity.

'Mendelian randomization': an approach for exploring causal relations in epidemiology.

PubMed

Gupta, V; Walia, G K; Sachdeva, M P

2017-04-01

To assess the current status of Mendelian randomization (MR) approach in effectively influencing the observational epidemiology for examining causal relationships. Narrative review on studies related to principle, strengths, limitations, and achievements of MR approach. Observational epidemiological studies have repeatedly produced several beneficiary associations which were discarded when tested by standard randomized controlled trials (RCTs). The technique which is more feasible, highly similar to RCTs, and has the potential to establish a causal relationship between modifiable exposures and disease outcomes is known as MR. The technique uses genetic variants related to modifiable traits/exposures as instruments for detecting causal and directional associations with outcomes. In the last decade, the approach of MR has methodologically developed and progressed to a stage of high acceptance among the epidemiologists and is gradually expanding the landscape of causal relationships in non-communicable chronic diseases. Copyright © 2016 The Royal Society for Public Health. Published by Elsevier Ltd. All rights reserved.

Wind-induced contaminant transport in near-surface soils with application to radon entry into buildings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riley, William Jowett

1996-05-01

Indoor air exposures to gaseous contaminants originating in soil can cause large human health risks. To predict and control these exposures, the mechanisms that affect vapor transport in near-surface soils need to be understood. In particular, radon exposure is a concern since average indoor radon concentrations lead to much higher risks than are generally accepted for exposure to other environmental contaminants. This dissertation examines an important component of the indoor radon problem: the impacts of wind on soil-gas and radon transport and entry into buildings. The research includes experimental and modeling studies of wind`s interactions with a building`s superstructure andmore » the resulting soil-gas and radon flows in the surrounding soil. In addition to exploring the effects of steady winds, a novel modeling technique is developed to examine the impacts of fluctuating winds on soil-gas and radon transport.« less

Assessment of Carbon- and Metal-Based Nanoparticle DNA Damage with Microfluidic Electrophoretic Separation Technology.

PubMed

Schrand, Amanda M; Powell, Thomas; Robertson, Tiffany; Hussain, Saber M

2015-02-01

In this study, we examined the feasibility of extracting DNA from whole cell lysates exposed to nanoparticles using two different methodologies for evaluation of fragmentation with microfluidic electrophoretic separation. Human lung macrophages were exposed to five different carbon- and metal-based nanoparticles at two different time points (2 h, 24 h) and two different doses (5 µg/ml, 100 µg/ml). The primary difference in the banding patterns after 2 h of nanoparticle exposure is more DNA fragmentation at the higher NP concentration when examining cells exposed to nanoparticles of the same composition. However, higher doses of carbon and silver nanoparticles at both short and long dosing periods can contribute to erroneous or incomplete data with this technique. Also comparing DNA isolation methodologies, we recommend the centrifugation extraction technique, which provides more consistent banding patterns in the control samples compared to the spooling technique. Here we demonstrate that multi-walled carbon nanotubes, 15 nm silver nanoparticles and the positive control cadmium oxide cause similar DNA fragmentation at the short time point of 2 h with the centrifugation extraction technique. Therefore, the results of these studies contribute to elucidating the relationship between nanoparticle physicochemical properties and DNA fragmentation results while providing the pros and cons of altering the DNA isolation methodology. Overall, this technique provides a high throughput way to analyze subcellular alterations in DNA profiles of cells exposed to nanomaterials to aid in understanding the consequences of exposure and mechanistic effects. Future studies in microfluidic electrophoretic separation technologies should be investigated to determine the utility of protein or other assays applicable to cellular systems exposed to nanoparticles.

Control of insects and mites in grain using a high temperature/short time (HTST) technique.

PubMed

Mourier; Poulsen

2000-07-01

Wheat infested with grain mites (Acari) and Sitophilus granarius, and maize infested with Prostephanus truncatus, were exposed to hot air in a CIMBRIA HTST Microline toaster((R)). Inlet temperatures of the hot air were in the range of 150-750 degrees C decreasing to outlet temperatures in the range of 100-300 degrees C during the exposure period. A rotating drum, connected to a natural-gas burner was fed with grain which was in constant movement along the drum and thereby mixed thoroughly during the process. The capacity of the toaster was 1000 kg per hour.Complete control of grain mites and adult S. granarius in wheat was obtained with an inlet temperature of 300-350 degrees C and an average residence time in the drum of 6 s. More than 99% mortality was obtained for all stages of S. granarius with an inlet temperature of 300-350 degrees C and an average exposure period of 40 s. For control of P. truncatus in maize, an inlet temperature of 700 degrees C resulted in a complete disinfestation when the exposure time was 19 s.The reduction in grain moisture content was 0.5-1% at treatments giving 100% control. Germination tests indicate that it is possible to choose a combination of inlet temperatures and exposure periods which effectively kills mites and insects in small grains, without harming the functional properties of the grain.Economy of the method was considered to be competitive with fumigation using phosphine.

Environmental exposure to arsenic and chromium in an industrial area.

PubMed

Vimercati, Luigi; Gatti, Maria F; Gagliardi, Tommaso; Cuccaro, Francesco; De Maria, Luigi; Caputi, Antonio; Quarato, Marco; Baldassarre, Antonio

2017-04-01

Arsenic and chromium are widespread environmental contaminants that affect global health due to their toxicity and carcinogenicity. To date, few studies have investigated exposure to arsenic and chromium in a population residing in a high-risk environmental area. The aim of this study is to evaluate the exposure to arsenic and chromium in the general population with no occupational exposure to these metals, resident in the industrial area of Taranto, Southern Italy, through biological monitoring techniques. We measured the levels of chromium, inorganic arsenic, and methylated metabolites, in the urine samples of 279 subjects residing in Taranto and neighboring areas. Qualified health staff administered a standardized structured questionnaire investigating lifestyle habits and controlling for confounding factors. The biological monitoring data showed high urinary concentrations of both the heavy metals investigated, particularly Cr. On this basis, it will be necessary to carry out an organized environmental monitoring program, taking into consideration all exposure routes so as to correlate the environmental concentrations of these metals with the biomonitoring results.

Differential effect of exposure-based therapy and cognitive therapy on post-traumatic stress disorder symptom clusters: A randomized controlled trial.

PubMed

Horesh, Danny; Qian, Meng; Freedman, Sara; Shalev, Arieh

2017-06-01

A question remains regarding differential effects of exposure-based versus non-exposure-based therapies on specific post-traumatic stress disorder (PTSD) symptom clusters. Traumatized emergency room patients were randomized to receive prolonged exposure (PE) or cognitive therapy (CT) without exposure. PE/CT had no differential effect on individual symptom clusters, and change in total PTSD score remained significant even after controlling for the reductions in all three symptom clusters. In addition, baseline levels of PTSD avoidance/intrusion/hyperarousal did not moderate the effects of PE and CT on total PTSD symptom scores. Taken together, these findings challenge the notion that PE and CT are specifically, and differentially, useful in treating one particular PTSD symptom cluster. Despite their different theoretical backgrounds and techniques, the notion that PE and CT (without exposure) target different PTSD symptoms was not confirmed in this study. Thus, both interventions may in fact be equally effective for treating intrusion, avoidance and hyperarousal symptoms. Baseline levels of avoidance, intrusion and hyperarousal may not be good a priori indicators for PTSD treatment selection. The effect of PE and CT on PTSD as a whole does not seem to depend on a reduction in any specific symptom cluster. These findings indicate that exposure and non-exposure interventions may lead to similar results in terms of reductions in specific PTSD symptoms. It is quite possible that individual PTSD clusters may respond to therapy in an inter-related fashion, with one cluster affecting the other. © 2016 The British Psychological Society.

RECRUITING, RETAINING, AND REPORTING EXPOSURE STUDY RESULTS TO PARTICIPANTS AND THE PUBLIC

EPA Science Inventory

EPA's National Exposure Research Laboratory (NERL) is developing techniques and capabilities to recruit and retain participants in exposure measurement studies and to effectively report study results to participants and the public. These techniques are being applied in three N...

Consumption of Substances of Abuse during Pregnancy Increases Consumption in Offspring: Possible Underlying Mechanisms

PubMed Central

Poon, Kinning; Leibowitz, Sarah F.

2016-01-01

Correlative human observational studies on substances of abuse have been highly dependent on the use of rodent models to determine the neuronal and molecular mechanisms that control behavioral outcomes. This is particularly true for gestational exposure to non-illicit substances of abuse, such as excessive dietary fat, ethanol, and nicotine, which are commonly consumed in our society. Exposure to these substances during the prenatal period has been shown in offspring to increase their intake of these substances, induce other behavioral changes, and affect neurochemical systems in several brain areas that are known to control behavior. More importantly, emerging studies are linking the function of the immune system to these neurochemicals and ingestion of these abused substances. This review article will summarize the prenatal rodent models used to study developmental changes in offspring caused by prenatal exposure to dietary fat, ethanol, or nicotine. We will discuss the various techniques used for the administration of these substances into rodents and summarize the published outcomes induced by prenatal exposure to these substances. Finally, this review will cover some of the recent evidence for the role of immune factors in causing these behavioral and neuronal changes. PMID:27148536

Evaluation of maxillary growth: is there any difference using relief incision during palatoplasty?

PubMed

Maluf, Ivan; Doro, Ubiratan; Fuchs, Taíse; dos Santos, Diego Esteves; dos Santos Sacomam, Franserg; da Silva Freitas, Renato; Roca, Guilherme Berto

2014-05-01

Scar retraction due to exposed bone in palatoplasty is the leading cause of constricted maxilla. Modern techniques have focused on minimizing the effects of scarring by reducing the exposure of the bone area. The objective of the study was to compare the palatal mucoperiosteal detachment with minimal lateral incision, followed by their synthesis, with the maintenance of lateral areas for relaxation (similar to the von Langenbeck technique) and evaluate the transversal development of the maxilla. A prospective, randomized study was conducted, in which the molding of the dental arch of 14 pigs in 2 stages (at 1 month and 5 months) was performed. The pigs were divided into 3 groups: group 1 underwent lateral incision of the palate for mucoperiosteal detachment and maintenance of bone exposure; group 2 underwent mucoperiosteal palatal detachment with lateral access and no bone exposure; and group 3, the control animals, did not undergo any surgical procedures. Measurements of the dental arches were compared between the groups to assess differences in the development of the maxillary transverse diameter. There were no animals lost during the study. Group 1 showed greater growth restriction of the transverse diameter of the maxilla (36%) when compared with groups 2 (56%) and 3 (59%). Groups 2 and 3 showed similar transverse maxillary development, with no statistical difference. The technique of mucoperiosteal detachment without lateral relief incision has the advantage of reducing future morbidity of a constricted maxilla. This study demonstrated that the technique described can reduce rates of maxillary underdevelopment, a significant complication inherent in the procedure for palatoplasty. The lateral incisions reduce maxillary growth by approximately 20% as compared with this technique. Level II of evidence.

Development of a microinstillation model of inhalation exposure to assess lung injury following exposure to toxic chemicals and nerve agents in Guinea pigs.

PubMed

Nambiar, Madhusoodana P; Wright, Benjamin S; Rezk, Peter E; Smith, Kelvin B; Gordon, Richard K; Moran, Theodore S; Richards, Shannon M; Sciuto, Alfred M

2006-01-01

Respiratory disturbances due to chemical warfare nerve agents (CWNAs) are the starting point of mass casualty and the primary cause of death by these weapons of terror and mass destruction. However, very few studies have been implemented to assess respiratory toxicity and exacerbation induced by CWNAs, especially methylphosphonothioic acid S-(2-(bis(1-methylethyl)amino)ethyl)O-ethyl ester (VX). In this study, we developed a microinstillation technique of inhalation exposure to assess lung injury following exposure to CWNAs and toxic chemicals. Guinea pigs were gently intubated by placing a microcatheter into the trachea 1.5 to 2.0 cm centrally above the bifurcation. This location is crucial to deliver aerosolized agents uniformly to the lung's lobes. The placement of the tube is calculated by measuring the distance from the upper front teeth to the tracheal bifurcation, which is typically 8.5 cm for guinea pigs of equivalent size and a weight range of 250 g to 300 g. The catheter is capable of withstanding 100 psi pressure; the terminus has five peripheral holes to pump air that aerosolizes the nerve agent that is delivered in the central hole. The microcatheter is regulated by a central control system to deliver the aerosolized agent in a volume lower than the tidal volume of the guinea pigs. The average particle size of the nerve agent delivered was 1.48 +/- 0.07 micrometer. The microinstillation technology has been validated by exposing the animals to Coomassie brilliant blue, which showed a uniform distribution of the dye in different lung lobes. In addition, the concentration of the dye in the lungs correlated with the dose/time of exposure. Furthermore, histopathological analysis confirmed the absence of barotraumas following micoinstillation. This novel technique delivers the agent safely, requires less amount of agent, avoids exposure to skin, pelt, and eye, and circumvents the concern of deposition of the particles in the nasal and palette due to the switching of breathing from nasal to oronasal in whole-body dynamic chamber or nose only exposure. Currently, we are using this inhalation exposure technique to investigate lung injuries and respiratory disturbances following direct exposure to VX.

Using virtual reality to improve the efficacy of cognitive-behavioral therapy (CBT) in the treatment of late-life anxiety: preliminary recommendations for future research.

PubMed

Grenier, Sébastien; Forget, Hélène; Bouchard, Stéphane; Isere, Sébastien; Belleville, Sylvie; Potvin, Olivier; Rioux, Marie-Ève; Talbot, Mélissa

2015-07-01

Cognitive-behavioral therapy (CBT) using traditional exposure techniques (i.e. imaginal and in vivo) seems less effective to treat anxiety in older adults than in younger ones. This is particularly true when imaginal exposure is used to confront the older patient to inaccessible (e.g. fear of flying) or less tangible/controllable anxiety triggers (e.g. fear of illness). Indeed, imaginal exposure may become less effective as the person gets older since normal aging is characterized by the decline in cognitive functions involved in the creation of vivid/detailed mental images. One way to circumvent this difficulty is to expose the older patient to a virtual environment that does not require the ability to imagine the frightening situation. In virtuo exposure has proven to be efficient to treat anxiety in working-age people. In virtuo exposure could be employed to improve the efficacy of CBT with exposure sessions in the treatment of late-life anxiety? The current paper explores this question and suggests new research avenues.

[Role of biometric analysis in the retrospective assessment of exposure to asbestos].

PubMed

Pairon, J C; Dumortier, P

1999-12-01

Despite intrinsic limitations due to differences in the bio-persistence of the various asbestos types, in the definition of control populations and in analytical techniques used by the laboratories, mineralogical analysis of biological samples is useful in the assessment of past exposure to asbestos. It provides additional information to occupational and environmental questionnaires, particularly when exposure to asbestos is doubtful, unknown or forgotten by a subject. Results should be interpreted taking into account clinical information. A positive result does not mean existence of asbestos-related disease. A negative result does not exclude previous significant asbestos exposure, clearly identified by an occupational questionnaire (particularly for exposure to chrysotile). Threshold values indicative of a high probability of previous asbestos exposure have been established for bronchoalveolar lavage fluid (BALF) samples and lung tissue samples. Quantification of asbestos bodies by light microscopy is easy to perform. Sensitivity and specificity of this analysis towards the total pulmonary asbestos fiber burden is good. Therefore this analysis should be performed first. Mineralogical analysis in BALF or lung tissue should be considered only when sampling is supported by diagnostic or therapeutic implications.

Elemental mercury contamination survey in a chlor-alkali plant by the use of transplanted Spanish moss, Tillandsia usneoides (L.).

PubMed

Calasans, C F; Malm, O

1997-12-22

Atmospheric Hg0 contamination and the potential risk of occupational exposure were evaluated in a chlor-alkali facility by the use of transplanted Tillandsia usneoides. This plant species was selected since it presents some features that makes it useful for air monitoring purposes. After short-term exposure (15 days), control plants showed a mean concentration of 0.2 microgram Hg.g-1 whereas Hg values in transplants ranged from 1 to 10,400 micrograms.g-1. This latter value was observed near an elemental Hg spillage. Even after exposure to toxic conditions plant metabolism was still operative, allowing the transplant technique to be employed to assess both Hg taken up through the stomata and Hg associated with particles deposited on the biomonitor.

Use of logistic regression for modelling risk factors: with application to non-melanoma skin cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vitaliano, P.P.

Logistic regression was used to estimate the relative risk of basal and squamous skin cancer for such factors as cumulative lifetime solar exposure, age, complexion, and tannability. In previous reports, a subject's exposure was estimated indirectly, by latitude, or by the number of sun days in a subject's habitat. In contrast, these results are based on interview data gathered for each subject. A relatively new technique was used to estimate relative risk by controlling for confounding and testing for effect modification. A linear effect for the relative risk of cancer versus exposure was found. Tannability was shown to be amore » more important risk factor than complexion. This result is consistent with the work of Silverstone and Searle.« less

Computed tomography automatic exposure control techniques in 18F-FDG oncology PET-CT scanning.

PubMed

Iball, Gareth R; Tout, Deborah

2014-04-01

Computed tomography (CT) automatic exposure control (AEC) systems are now used in all modern PET-CT scanners. A collaborative study was undertaken to compare AEC techniques of the three major PET-CT manufacturers for fluorine-18 fluorodeoxyglucose half-body oncology imaging. An audit of 70 patients was performed for half-body CT scans taken on a GE Discovery 690, Philips Gemini TF and Siemens Biograph mCT (all 64-slice CT). Patient demographic and dose information was recorded and image noise was calculated as the SD of Hounsfield units in the liver. A direct comparison of the AEC systems was made by scanning a Rando phantom on all three systems for a range of AEC settings. The variation in dose and image quality with patient weight was significantly different for all three systems, with the GE system showing the largest variation in dose with weight and Philips the least. Image noise varied with patient weight in Philips and Siemens systems but was constant for all weights in GE. The z-axis mA profiles from the Rando phantom demonstrate that these differences are caused by the nature of the tube current modulation techniques applied. The mA profiles varied considerably according to the AEC settings used. CT AEC techniques from the three manufacturers yield significantly different tube current modulation patterns and hence deliver different doses and levels of image quality across a range of patient weights. Users should be aware of how their system works and of steps that could be taken to optimize imaging protocols.

Diffusion Tensor Imaging of the Cerebellum and Eyeblink Conditioning in Fetal Alcohol Spectrum Disorder

PubMed Central

Spottiswoode, B.S.; Meintjes, E.M.; Anderson, A.W.; Molteno, C.D.; Stanton, M.E.; Dodge, N.C.; Gore, J.C.; Peterson, B.S.; Jacobson, J.L.; Jacobson, S.W.

2011-01-01

Background Prenatal alcohol exposure is related to a wide range of neurocognitive effects. Eyeblink conditioning (EBC), which involves temporal pairing of a conditioned with an unconditioned stimulus, has been shown to be a potential biomarker of fetal alcohol exposure. A growing body of evidence suggests that white matter may be a specific target of alcohol teratogenesis, and the neural circuitry underlying EBC is known to involve the cerebellar peduncles. Diffusion tensor imaging (DTI) is a magnetic resonance imaging (MRI) technique which has proven useful for assessing central nervous system white matter integrity. This study used DTI to examine the degree to which the fetal alcohol-related deficit in EBC may be mediated by structural impairment in the cerebellar peduncles. Methods 13 children with fetal alcohol spectrum disorder (FASD) and 12 matched controls were scanned using DTI and structural MRI sequences. The DTI data were processed using a voxelwise technique, and the structural data were used for volumetric analyses. Prenatal alcohol exposure group and EBC performance were examined in relation to brain volumes and outputs from the DTI analysis. Results FA and perpendicular diffusivity group differences between alcohol-exposed and nonexposed children were identified in the left middle cerebellar peduncle. Alcohol exposure correlated with lower fractional anisotropy (FA) and greater perpendicular diffusivity in this region, and these correlations remained significant even after controlling for total brain and cerebellar volume. Conversely, trace conditioning performance was related to higher FA and lower perpendicular diffusivity in the left middle peduncle. The effect of prenatal alcohol exposure on trace conditioning was partially mediated by lower FA in this region. Conclusions This study extends recent findings that have used DTI to reveal microstructural deficits in white matter in children with FASD. This is the first DTI study to demonstrate mediation of a fetal alcohol-related effect on neuropsychological function by deficits in white matter integrity. PMID:21790667

Breaking the acoustic diffraction limit via nonlinear effect and thermal confinement for potential deep-tissue high-resolution imaging

PubMed Central

Yuan, Baohong; Pei, Yanbo; Kandukuri, Jayanth

2013-01-01

Our recently developed ultrasound-switchable fluorescence (USF) imaging technique showed that it was feasible to conduct high-resolution fluorescence imaging in a centimeter-deep turbid medium. Because the spatial resolution of this technique highly depends on the ultrasound-induced temperature focal size (UTFS), minimization of UTFS becomes important for further improving the spatial resolution USF technique. In this study, we found that UTFS can be significantly reduced below the diffraction-limited acoustic intensity focal size via nonlinear acoustic effects and thermal confinement by appropriately controlling ultrasound power and exposure time, which can be potentially used for deep-tissue high-resolution imaging. PMID:23479498

Application of Hyphenated Techniques in Speciation Analysis of Arsenic, Antimony, and Thallium

PubMed Central

Michalski, Rajmund; Szopa, Sebastian; Jabłońska, Magdalena; Łyko, Aleksandra

2012-01-01

Due to the fact that metals and metalloids have a strong impact on the environment, the methods of their determination and speciation have received special attention in recent years. Arsenic, antimony, and thallium are important examples of such toxic elements. Their speciation is especially important in the environmental and biomedical fields because of their toxicity, bioavailability, and reactivity. Recently, speciation analytics has been playing a unique role in the studies of biogeochemical cycles of chemical compounds, determination of toxicity and ecotoxicity of selected elements, quality control of food products, control of medicines and pharmaceutical products, technological process control, research on the impact of technological installation on the environment, examination of occupational exposure, and clinical analysis. Conventional methods are usually labor intensive, time consuming, and susceptible to interferences. The hyphenated techniques, in which separation method is coupled with multidimensional detectors, have become useful alternatives. The main advantages of those techniques consist in extremely low detection and quantification limits, insignificant interference, influence as well as high precision and repeatability of the determinations. In view of their importance, the present work overviews and discusses different hyphenated techniques used for arsenic, antimony, and thallium species analysis, in different clinical, environmental and food matrices. PMID:22654649

Use of scatterometry for resist process control

NASA Astrophysics Data System (ADS)

Bishop, Kenneth P.; Milner, Lisa-Michelle; Naqvi, S. Sohail H.; McNeil, John R.; Draper, B. L.

1992-06-01

The formation of resist lines having submicron critical dimensions (CDs) is a complex multistep process, requiring precise control of each processing step. Optimization of parameters for each processing step may be accomplished through theoretical modeling techniques and/or the use of send-ahead wafers followed by scanning electron microscope measurements. Once the optimum parameters for any process having been selected, (e.g., time duration and temperature for post-exposure bake process), no in-situ CD measurements are made. In this paper we describe the use of scatterometry to provide this essential metrology capability. It involves focusing a laser beam on a periodic grating and predicting the shape of the grating lines from a measurement of the scattered power in the diffraction orders. The inverse prediction of lineshape from a measurement of the scatter power is based on a vector diffraction analysis used in conjunction with photolithography simulation tools to provide an accurate scatter model for latent image gratings. This diffraction technique has previously been applied to looking at latent image grating formation, as exposure is taking place. We have broadened the scope of the application and consider the problem of determination of optimal focus.

Variable anodic thermal control coating on aluminum

NASA Technical Reports Server (NTRS)

Duckett, R. J.; Gilliland, C. S.

1983-01-01

A variable thermal control coating (modified chromic acid anodizing) has been developed to meet the needs for the thermal control of spacecraft. This coating, with controlled variable ranges of 0.10 to 0.72 thermal emittance and 0.2 to 0.4 solar absorptance, allows the user to select any value of thermal emittance and solar absorptance within the range specified and obtain both values within + or - 0.02. Preliminary solar stability has shown less than 15 percent degradation over 2000 hours of vacuum solar exposure. The technique has been determined to be sensitive to the parameters of voltage, rate of voltage application, time, temperature, acid concentration, and material pretreatment.

Minimizing radiation exposure during percutaneous nephrolithotomy.

PubMed

Chen, T T; Preminger, G M; Lipkin, M E

2015-12-01

Given the recent trends in growing per capita radiation dose from medical sources, there have been increasing concerns over patient radiation exposure. Patients with kidney stones undergoing percutaneous nephrolithotomy (PNL) are at particular risk for high radiation exposure. There exist several risk factors for increased radiation exposure during PNL which include high Body Mass Index, multiple access tracts, and increased stone burden. We herein review recent trends in radiation exposure, radiation exposure during PNL to both patients and urologists, and various approaches to reduce radiation exposure. We discuss incorporating the principles of As Low As reasonably Achievable (ALARA) into clinical practice and review imaging techniques such as ultrasound and air contrast to guide PNL access. Alternative surgical techniques and approaches to reducing radiation exposure, including retrograde intra-renal surgery, retrograde nephrostomy, endoscopic-guided PNL, and minimally invasive PNL, are also highlighted. It is important for urologists to be aware of these concepts and techniques when treating stone patients with PNL. The discussions outlined will assist urologists in providing patient counseling and high quality of care.

[GERD: endoscopic antireflux therapies].

PubMed

Caca, K

2006-08-02

A couple of minimally-invasive, endoscopic antireflux procedures have been developed during the last years. Beside endoscopic suturing these included injection/implantation technique of biopolymers and application of radiofrequency. Radiofrequency (Stretta) has proved only a very modest effect, while implantation techniques have been abandoned due to lack of long-term efficacy (Gatekeeper) or serious side effects (Enteryx). While first generation endoluminal suturing techniques (EndoCinch, ESD) demonstrated a proof of principle their lack of durability, due to suture loss, led to the development of a potentially durable transmural plication technique (Plicator). In a prospective-randomized, sham-controlled trial the Plicator procedure proved superiority concerning reflux symptoms, medication use and esophageal acid exposure (24-h-pH-metry). While long-term data have to be awaited to draw final conclusions, technical improvements will drive innovation in this field.

A technology roadmap of smart biosensors from conventional glucose monitoring systems.

PubMed

Shende, Pravin; Sahu, Pratiksha; Gaud, Ram

2017-06-01

The objective of this review article is to focus on technology roadmap of smart biosensors from a conventional glucose monitoring system. The estimation of glucose with commercially available devices involves analysis of blood samples that are obtained by pricking finger or extracting blood from the forearm. Since pain and discomfort are associated with invasive methods, the non-invasive measurement techniques have been investigated. The non-invasive methods show advantages like non-exposure to sharp objects such as needles and syringes, due to which there is an increase in testing frequency, improved control of glucose concentration and absence of pain and biohazard materials. This review study is aimed to describe recent invasive techniques and major noninvasive techniques, viz. biosensors, optical techniques and sensor-embedded contact lenses for glucose estimation.

Use and effectiveness of commercial flit-spray insecticides in control of mosquito population in Sagamu, Southwest Nigeria.

PubMed

Adedeji, A A; Ahmed, I A; Akinwunmi, M; Aina, S A; Tikare, O; Adeboye, A F; Badmos, S O; Adedeji, K A; Fehintola, F A; Amoo, A O J

2012-06-01

Control of mosquito vector is crucial to reducing the burden of malaria in endemic region. In the present study, we investigated the use of commercial insecticides in families and their effectiveness in control of mosquito population in Sagamu, southwest Nigeria. A pretested structured questionnaire was used to determine mosquito adulticides techniques employed in the community and most commonly used adulticides were evaluated for effectiveness by exposing adult mosquitoes to varying concentrations of the insecticides and responses monitored. Families differ in methods adopted to prevent mosquito and use of flit-spray insecticide was commoner. Although parents constitute 64% of those applying the insecticide, 22.2% were children. Household pyrethroid insecticide products of Baygon (Imiprothrin, Prallethrin plus Cyfluthrin), Mobil (Neopynamin, Prallethrin plus Cyphenothrin) and Raid (Pynamin forte, Neopynamin plus Deltimethrin) were three commonly used in the community. The exposure tie interval for eath of osquitoes was shorter with Raid (100% at 8 minutes) when compared with Mobil (80%) and Baygon (85%) at 10 minutes (p = 0.005). Kaplan-Meier survival curve of cumulative probability of surviving exposure to insecticide was lowest with Raid (log rank 2 = 14.56, P = 0.001). Although flit-spray insecticides are affordable with simple application tool, inexplicit use-instruction on labels may cause discrepancies in application. Monitoring responses of mosquitoes to commercial flit-spray insecticide may support effective control technique and prevention of vector resistance in poor resource communities.

Review of various liver retraction techniques in single incision laparoscopic surgery for the exposure of hiatus.

PubMed

Palanivelu, Praveenraj; Patil, Kedar Pratap; Parthasarathi, Ramakrishnan; Viswambharan, Jaiganesh K; Senthilnathan, Palanisami; Palanivelu, Chinnusamy

2015-01-01

The main aspect of concern for upper GI procedures has been the retraction of the liver especially large left lobes as commonly encountered in Bariatric surgery. Not doing so would compromise the view of the hiatus, hence theoretically reducing the quality of the surgery and increasing the possibility of complications. The aim of this study was to review the various liver retraction techniques in single incision surgery being done at our institute and analyze them. A retrospective study of the various techniques and a subsequent analysis was made based on advantages and disadvantages of each method. Objectively a quantitative measure of hiatal exposure was done using a scoring system based on the grade of exposure after reviewing the surgical videos. From January 2011 to January 2013 total 104 patients underwent single incision surgery with the various liver retraction techniques with following grades of exposure -liver suspension tube technique with naso gastric tubing (2.11) and with corrugated drain (2.09) needlescopic method (1.2), Umbilical tape sling (1.95), crural stitch method (2.5). Needeloscopic method has the best grade of exposure and is the easiest to start with. The average time to create the liver retraction was 2.8 to 8.6 min.There was no procedure related morbidity or mortality. The mentioned liver retraction techniques are cost effective and easy to learn. We recommend using these techniques to have a good exposure of hiatus, without compromising the safety of surgery in single incision surgery.

Cholinergic synaptic transmissions were altered after single sevoflurane exposure in Drosophila pupa.

PubMed

Chen, Rongfa; Zhang, Tao; Kuang, Liting; Chen, Zhen; Ran, Dongzhi; Niu, Yang; Xu, Kangqing; Gu, Huaiyu

2015-01-01

. Sevoflurane, one of the most used general anesthetics, is widely used in clinical practice all over the world. Previous studies indicated that sevoflurane could induce neuron apoptosis and neural deficit causing query in the safety of anesthesia using sevoflurane. The present study was designed to investigate the effects of sevoflurane on electrophysiology in Drosophila pupa whose excitatory neurotransmitter is acetylcholine early after sevoflurane exposure using whole brain recording technique. Wide types of Drosophila (canton-s flies) were allocated to control and sevoflurane groups randomly. Sevoflurane groups (1% sevoflurane; 2% sevoflurane; 3% sevoflurane) were exposed to sevoflurane and the exposure lasted 5 hours, respectively. All flies were subjected to electrophysiology experiment using patch clamp 24 hours after exposure. The results showed that, 24 hours after sevoflurane exposure, frequency but not the amplitude of miniature excitatory postsynaptic currents (mEPSCs) was significantly reduced (P < 0.05). Furthermore, we explored the underlying mechanism and found that calcium currents density, which partially regulated the frequency of mEPSCs, was significantly reduced after sevoflurane exposure (P < 0.05). All these suggested that sevoflurane could alter the mEPSCs that are related to synaptic plasticity partially through modulating calcium channel early after sevoflurane exposure.

Underwater temporary threshold shift in pinnipeds: effects of noise level and duration.

PubMed

Kastak, David; Southall, Brandon L; Schusterman, Ronald J; Kastak, Colleen Reichmuth

2005-11-01

Behavioral psychophysical techniques were used to evaluate the residual effects of underwater noise on the hearing sensitivity of three pinnipeds: a California sea lion (Zalophus californianus), a harbor seal (Phoca vitulina), and a northern elephant seal (Mirounga angustirostris). Temporary threshold shift (TTS), defined as the difference between auditory thresholds obtained before and after noise exposure, was assessed. The subjects were exposed to octave-band noise centered at 2500 Hz at two sound pressure levels: 80 and 95 dB SL (re: auditory threshold at 2500 Hz). Noise exposure durations were 22, 25, and 50 min. Threshold shifts were assessed at 2500 and 3530 Hz. Mean threshold shifts ranged from 2.9-12.2 dB. Full recovery of auditory sensitivity occurred within 24 h of noise exposure. Control sequences, comprising sham noise exposures, did not result in significant mean threshold shifts for any subject. Threshold shift magnitudes increased with increasing noise sound exposure level (SEL) for two of the three subjects. The results underscore the importance of including sound exposure metrics (incorporating sound pressure level and exposure duration) in order to fully assess the effects of noise on marine mammal hearing.

Parental occupational exposures and risk of childhood cancer.

PubMed Central

Colt, J S; Blair, A

1998-01-01

Occupational exposures of parents might be related to cancer in their offspring. Forty-eight published studies on this topic have reported relative risks for over 1000 specific occupation/cancer combinations. Virtually all of the studies employed the case-control design. Occupations and exposures of fathers were investigated much more frequently than those of the mother. Information about parental occupations was derived through interviews or from birth certificates and other administrative records. Specific exposures were typically estimated by industrial hygienists or were self-reported. The studies have several limitations related to the quality of the exposure assessment, small numbers of exposed cases, multiple comparisons, and possible bias toward the reporting of positive results. Despite these limitations, they provide evidence that certain parental exposures may be harmful to children and deserve further study. The strongest evidence is for childhood leukemia and paternal exposure to solvents, paints, and employment in motor vehicle-related occupations; and childhood nervous system cancers and paternal exposure to paints. To more clearly evaluate the importance of these and other exposures in future investigations, we need improvements in four areas: a) more careful attention must be paid to maternal exposures; b) studies should employ more sophisticated exposure assessment techniques; c) careful attention must be paid to the postulated mechanism, timing, and route of exposure; and d) if postnatal exposures are evaluated, studies should provide evidence that the exposure is actually transferred from the workplace to the child's environment. PMID:9646055

Counterbalancing in Smoking Cue Research: A Critical Analysis

PubMed Central

Griffin, Kasey M.; Sayers, W. Michael

2010-01-01

Introduction: Cue exposure research has been used to examine key issues in smoking research, such as predicting relapse, testing new medications, investigating the neurobiology of nicotine dependence, and examining reactivity among smokers with comorbid psychopathologies. Determining the order that cues are presented is one of the most critical steps in the design of these investigations. It is widely assumed that cue exposure studies should counterbalance the order in which smoking and control (neutral) cues are presented. This article examines the premises underlying the use of counterbalancing in experimental research, and it evaluates the degree to which counterbalancing is appropriate in smoking cue exposure studies. Methods: We reviewed the available literature on the use of counterbalancing techniques in human smoking cue exposure research. Results: Many studies counterbalancing order of cues have not provided critical analyses to determine whether this approach was appropriate. Studies that have reported relevant data, however, suggest that order of cue presentation interacts with type of cue (smoking vs. control), which raises concerns about the utility of counterbalancing. Primarily, this concern arises from potential carryover effects, in which exposure to smoking cues affects subsequent responding to neutral cues. Conclusions: Cue type by order of cue interactions may compromise the utility of counterbalancing. Unfortunately, there is no obvious alternative that is optimal across studies. Strengths and limitations of several alternative designs are considered, and key questions are identified to advance understanding of the optimal conditions for conducting smoking cue exposure studies. PMID:20884695

Mild carbon monoxide exposure diminishes selectively the integrity of the cochlea of the developing rat.

PubMed

Lopez, Ivan; Acuna, Dora; Webber, Douglas S; Korsak, Rose A; Edmond, John

2003-12-01

Rat pups were chronically exposed to carbon monoxide (CO) concentrations (12 or 25 ppm) in air starting at day 8, through 22 days of age, to examine the changes in the peripheral auditory system. Gastrostomy-reared rat pups, with or without CO exposure, were used and compared with mother-reared pups. The organ of Corti and the neurons of the spiral ganglion were analyzed for their morphology by using immunochemical and histological techniques. The inner and outer hair cells in the organ of Corti of animals exposed to 12 and 25 ppm CO were not different from the controls. However, at 25 ppm CO exposure, the nerve terminals innervating the inner hair cells were swollen. The somata of neurons in the spiral ganglion showed mild changes in the cytoplasm, and signs of mild vacuolization were observed in myelin covering their central processes. Synaptophysin, a marker for synaptic vesicles, and choline acetyltransferase, a marker for cholinergic terminals, showed no difference in immunoreactivity in CO exposed animals at 12 and at 25 ppm when compared with their age-matched controls. Also, Na(+)K(+) ATPase immunoreactivity patterns were normal compared with controls. Three enzymes were significantly reduced at the 25 ppm CO exposure: Cytochrome oxidase, NADH-TR, and calcium ATPase were decreased in both the organ of Corti and the neurons of the spiral ganglion, and decreased immunostaining for the neurofilament and myelin basic proteins was found. We conclude that components of the cochlea are selectively affected by mild chronic CO exposure during development. Copyright 2003 Wiley-Liss, Inc.

Cell viability test after laser guidance

NASA Astrophysics Data System (ADS)

Rosenbalm, Tabitha N.; Owens, Sarah; Bakken, Daniel; Gao, Bruce Z.

2006-02-01

To precisely control the position of multiple types of cells in a coculture for the study of cell-cell interactions, we have developed a laser micropatterning technique. The technique employs the optical forces generated by a weakly focused laser beam. In the beam's focal region, the optical force draws microparticles, such as cells, into the center of the beam, propels them along the beam axis, and guides them onto a target surface. Specific patterns are created through computercontrolled micromanipulation of the substrate relative to the laser beam. Preliminary data have demonstrated cell viability after laser guidance. This project was designed to systematically vary the controllable laser parameters, namely, intensity and exposure time of the laser on single cells, and thus determine the laser parameters that allow negligible cell damage with functional cellular position control. To accomplish this goal, embryonic day 7 (E7) chick forebrain neurons were cultured in 35 mm petri dishes. Control and test cells were selected one hour after cell placement to allow cell attachment. Test cells were subjected to the laser at the focal region. The experimental parameters were chosen as: wavelength - 800 nm, intensities - 100 mW, 200 mW, and 300 mW, and exposure times - 10 s and 60 s. Results were analyzed based on neurite outgrowth and the Live/Dead assay (Viability/Cytoxicity kit from Molecular Probes). No statistical difference (p >> 0.1, student t-test) in viability or function was found between the control neurons and those exposed to the laser. This confirms that laser guidance seems to be a promising method for cellular manipulation.

Extending the Distributed Lag Model framework to handle chemical mixtures.

PubMed

Bello, Ghalib A; Arora, Manish; Austin, Christine; Horton, Megan K; Wright, Robert O; Gennings, Chris

2017-07-01

Distributed Lag Models (DLMs) are used in environmental health studies to analyze the time-delayed effect of an exposure on an outcome of interest. Given the increasing need for analytical tools for evaluation of the effects of exposure to multi-pollutant mixtures, this study attempts to extend the classical DLM framework to accommodate and evaluate multiple longitudinally observed exposures. We introduce 2 techniques for quantifying the time-varying mixture effect of multiple exposures on an outcome of interest. Lagged WQS, the first technique, is based on Weighted Quantile Sum (WQS) regression, a penalized regression method that estimates mixture effects using a weighted index. We also introduce Tree-based DLMs, a nonparametric alternative for assessment of lagged mixture effects. This technique is based on the Random Forest (RF) algorithm, a nonparametric, tree-based estimation technique that has shown excellent performance in a wide variety of domains. In a simulation study, we tested the feasibility of these techniques and evaluated their performance in comparison to standard methodology. Both methods exhibited relatively robust performance, accurately capturing pre-defined non-linear functional relationships in different simulation settings. Further, we applied these techniques to data on perinatal exposure to environmental metal toxicants, with the goal of evaluating the effects of exposure on neurodevelopment. Our methods identified critical neurodevelopmental windows showing significant sensitivity to metal mixtures. Copyright © 2017 Elsevier Inc. All rights reserved.

Prenatal Tobacco Exposure and Brain Morphology: A Prospective Study in Young Children

PubMed Central

El Marroun, Hanan; Schmidt, Marcus N; Franken, Ingmar H A; Jaddoe, Vincent W V; Hofman, Albert; van der Lugt, Aad; Verhulst, Frank C; Tiemeier, Henning; White, Tonya

2014-01-01

It is well known that smoking during pregnancy can affect offspring health. Prenatal tobacco exposure has been associated with negative behavioral and cognitive outcomes in childhood, adolescence, and young adulthood. These associations between prenatal tobacco exposure and psychopathology in offspring could possibly be explained by the influence of prenatal tobacco exposure on brain development. In this prospective study, we investigated the association between prenatal tobacco exposure, behavioral and emotional functioning and brain morphology in young children. On the basis of age and gender, we matched 113 children prenatally exposed to tobacco with 113 unexposed controls. These children were part of a population-based study in the Netherlands, the Generation R Study, and were followed from pregnancy onward. Behavioral and emotional functioning was assessed at age 6 with the Child Behavior Checklist. We assessed brain morphology using magnetic resonance imaging techniques in children aged 6–8 years. Children exposed to tobacco throughout pregnancy have smaller total brain volumes and smaller cortical gray matter volumes. Continued prenatal tobacco exposure was associated with cortical thinning, primarily in the superior frontal, superior parietal, and precentral cortices. These children also demonstrated increased scores of affective problems. In addition, thickness of the precentral and superior frontal cortices was associated with affective problems. Importantly, brain development in offspring of mothers who quit smoking during pregnancy resembled that of nonexposed controls (no smaller brain volumes and no thinning of the cortex). Our findings suggest an association between continued prenatal tobacco exposure and brain structure and function in school-aged children. PMID:24096296

A new technique to assess dermal absorption of volatile chemicals in vitro by thermal gravimetric analysis.

PubMed

Rauma, Matias; Isaksson, Tina S; Johanson, Gunnar

2006-10-01

Potential health hazards of dermal exposure, variability in reported dermal absorption rates and potential losses from the skin by evaporation indicate a need for a simple, inexpensive and standardized procedure to measure dermal absorption and desorption of chemical substances. The aim of this study was to explore the possibility to measure dermal absorption and desorption of volatile chemicals using a new gravimetric technique, namely thermal gravimetric analysis (TGA), and trypsinated stratum corneum from pig. Changes in skin weight were readily detected before, during and after exposure to vapours of water, 2-propanol, methanol and toluene. The shape and height of the weight curves differed between the four chemicals, reflecting differences in diffusivity and partial pressure and skin:air partitioning, respectively. As the skin weight is highly sensitive to the partial pressure of volatile chemicals, including water, this technique requires carefully controlled conditions with respect to air flow, temperature, chemical vapour generation and humidity. This new technique may help in the assessment of dermal uptake of volatile chemicals. Only a small piece of skin is needed and skin integrity is not necessary, facilitating the use of human samples. The high resolution weight-time curves obtained may also help to elucidate the characteristics of absorption, desorption and diffusion of chemicals in skin.

Three Dimensional Microfabrication On Thick Film Photoresist Mandrels

NASA Astrophysics Data System (ADS)

Salmre, William

1984-05-01

Small, three-dimensional structures are fabricated by the use of thick film photoresist mandrels as substrates for electoforming or other deposition techniques. Novel methods have been developed for the sculpting of the resist to desired shapes. These techniques rely heavily on the use of glass or other substrates coated with layers of metal. The metal serves both as a photomask and as a conductor of electricity. Commercially available chrome-on-glass photomasks are convenient for this purpose although other substrates have also been used. By controlling the thickness and light transmission of the metal layer, the amount of exposure of the resist can also be controlled to produce the desired shapes in the resist. For even more complex mandrels the resist can be exposed from both sides using self-aligned photomasks.

Exposure to enteroviruses and hepatitis A virus among divers in environmental waters in France, first biological and serological survey of a controlled cohort.

PubMed Central

Garin, D.; Fuchs, F.; Crance, J. M.; Rouby, Y.; Chapalain, J. C.; Lamarque, D.; Gounot, A. M.; Aymard, M.

1994-01-01

An epidemiological study of hepatitis A and enteroviruses was conducted in a military diving training school, by evaluating the viral contamination of water using an ultrafiltration concentration technique, and assessing seroconversion and the presence of virus in stool specimens obtained from 109 divers and 48 controls. Three of 29 water specimens were positive for enterovirus by cell culture and 9 by molecular hybridization. There was little or no risk of virus infection during the training course (49 h exposure) because there was no significant difference between divers and controls for both viral isolation and seroconversion. However, a higher percentage of coxsackievirus B4 and B5 seropositive divers suggests that these were more exposed during previous water training. No hepatitis A virus (HAV) detection and no seroconversion to HAV was observed. The rate of HAV seropositive subjects was 17% in this 24.5-year-old population. PMID:7995363

Bayes and empirical Bayes methods for reduced rank regression models in matched case-control studies.

PubMed

Satagopan, Jaya M; Sen, Ananda; Zhou, Qin; Lan, Qing; Rothman, Nathaniel; Langseth, Hilde; Engel, Lawrence S

2016-06-01

Matched case-control studies are popular designs used in epidemiology for assessing the effects of exposures on binary traits. Modern studies increasingly enjoy the ability to examine a large number of exposures in a comprehensive manner. However, several risk factors often tend to be related in a nontrivial way, undermining efforts to identify the risk factors using standard analytic methods due to inflated type-I errors and possible masking of effects. Epidemiologists often use data reduction techniques by grouping the prognostic factors using a thematic approach, with themes deriving from biological considerations. We propose shrinkage-type estimators based on Bayesian penalization methods to estimate the effects of the risk factors using these themes. The properties of the estimators are examined using extensive simulations. The methodology is illustrated using data from a matched case-control study of polychlorinated biphenyls in relation to the etiology of non-Hodgkin's lymphoma. © 2015, The International Biometric Society.

Methodology Series Module 2: Case-control Studies.

PubMed

Setia, Maninder Singh

2016-01-01

Case-Control study design is a type of observational study. In this design, participants are selected for the study based on their outcome status. Thus, some participants have the outcome of interest (referred to as cases), whereas others do not have the outcome of interest (referred to as controls). The investigator then assesses the exposure in both these groups. The investigator should define the cases as specifically as possible. Sometimes, definition of a disease may be based on multiple criteria; thus, all these points should be explicitly stated in case definition. An important aspect of selecting a control is that they should be from the same 'study base' as that of the cases. We can select controls from a variety of groups. Some of them are: General population; relatives or friends; and hospital patients. Matching is often used in case-control control studies to ensure that the cases and controls are similar in certain characteristics, and it is a useful technique to increase the efficiency of the study. Case-Control studies can usually be conducted relatively faster and are inexpensive - particularly when compared with cohort studies (prospective). It is useful to study rare outcomes and outcomes with long latent periods. This design is not very useful to study rare exposures. Furthermore, they may also be prone to certain biases - selection bias and recall bias.

Evaluating Equating Results in the Non-Equivalent Groups with Anchor Test Design Using Equipercentile and Equity Criteria

ERIC Educational Resources Information Center

Duong, Minh Quang

2011-01-01

Testing programs often use multiple test forms of the same test to control item exposure and to ensure test security. Although test forms are constructed to be as similar as possible, they often differ. Test equating techniques are those statistical methods used to adjust scores obtained on different test forms of the same test so that they are…

Photographic consulting services to the Earth Resources program. [using aerial photography as a tool for scientific measurement

NASA Technical Reports Server (NTRS)

1976-01-01

The recommendations, procedures, and techniques are summarized which provided by the Kodak Apparatus Division to the Ames Research Center to support the Earth Resources Aircraft Program at that facility. Recommendations, procedures, and calibration data are included for sensitometry, densitometry, laboratory cleanliness, and determination of camera exposure. Additional comments are made regarding process control procedures and general laboratory operations.

The Effects of the 1999 Turkish Earthquake on Young Children: Analyzing Traumatized Children's Completion of Short Stories

ERIC Educational Resources Information Center

Oncu, Elif Celebi; Wise, Aysegul Metindogan

2010-01-01

The purpose of this exploratory study was to determine whether projective techniques could identify long-term consequences among children stemming from exposure to a traumatic event. The first group of children (n = 53; 26 female, 27 male) experienced 2 major earthquakes at age 7, 3 months apart, in Turkey, while a similarly matched control group…

LDEF mechanical systems

NASA Technical Reports Server (NTRS)

Spear, W. Steve; Dursch, Harry W.

1992-01-01

Following LDEF retrieval, a number of studies were made of mechanical hardware and structure flown on the LDEF. The primary objectives are to determine the effects of long term space exposure on (1) mechanisms either used on LDEF or as part of individual experiments; (2) LDEF structural components; and (3) fasteners. Results from examination and testing of LDEF structure, fasteners, LDEF end support beam, environment exposure control canisters, experiment tray clamps, LDEF grapple fixtures, and viscous damper are presented. The most significant finding is the absence of space exposure related cold welding. The instances of seizure or removal difficulties initially attributed to cold welding were shown to have resulted from installation galling damage or improper removal techniques. Widespread difficulties encountered with removal of stainless steel fasteners underscore the need for effective thread lubrication schemes to ensure successful application of proposed orbital replacement units onboard Space Station Freedom.

Exhaled human breath measurement method for assessing exposure to halogenated volatile organic compounds.

PubMed

Pleil, J D; Lindstrom, A B

1997-05-01

The organic constituents of exhaled human breath are representative of blood-borne concentrations through gas exchange in the blood/breath interface in the lungs. The presence of specific compounds can be an indicator of recent exposure or represent a biological response of the subject. For volatile organic compounds (VOCs), sampling and analysis of breath is preferred to direct measurement from blood samples because breath collection is noninvasive, potentially infectious waste is avoided, and the measurement of gas-phase analytes is much simpler in a gas matrix rather than in a complex biological tissue such as blood. To exploit these advantages, we have developed the "single breath canister" (SBC) technique, a simple direct collection method for individual alveolar breath samples, and adapted conventional gas chromatography-mass spectrometry analytical methods for trace-concentration VOC analysis. The focus of this paper is to describe briefly the techniques for making VOC measurements in breath, to present some specific applications for which these methods are relevant, and to demonstrate how to estimate exposure to example VOCs on the basis of breath elimination. We present data from three different exposure scenarios: (a) vinyl chloride and cis-1,2-dichloroethene from showering with contaminated water from a private well, (b) chloroform and bromodichloromethane from high-intensity swimming in chlorinated pool water, and (c) trichloroethene from a controlled exposure chamber experiment. In all cases, for all subjects, the experiment is the same: preexposure breath measurement, exposure to halogenated VOC, and a postexposure time-dependent series of breath measurements. Data are presented only to demonstrate the use of the method and how to interpret the analytical results.

Analyzing workplace exposures using direct reading instruments and video exposure monitoring techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gressel, M.G.; Heitbrink, W.A.; Jensen, P.A.

1992-08-01

The techniques for conducting video exposure monitoring were described along with the equipment required to monitor and record worker breathing zone concentrations, the analysis of the real time exposure data using video recordings, and the use of real time concentration data from a direct reading instrument to determine the effective ventilation rate and the mixing factor of a given room at a specific time. Case studies which made use of video exposure monitoring techniques to provide information not available through integrated sampling were also discussed. The process being monitored and the methodology used to monitor the exposures were described formore » each of the case studies. The case studies included manual material weigh out, ceramic casting cleaning, dumping bags of powdered materials, furniture stripping, administration of nitrous-oxide during dental procedures, hand held sanding operation, methanol exposures in maintenance garages, brake servicing, bulk loading of railroad cars and trucks, and grinding operations.« less

FEASIBILITY STUDY FOR IDENTIFICATION OF STATIC AND DYNAMIC EXPOSURE USING CCD IMAGING TECHNIQUE FOR Caso4:Dy TL DOSEMETERS.

PubMed

Srivastava, Kshama; Soin, Seepika; Sapra, B K; Ratna, P; Datta, D

2017-11-01

The occupational exposure incurred by the radiation workers due to the external radiation is estimated using personal dosemeter placed on the human body during the monitoring period. In certain situations, it is required to determine whether the dosemeter alone was exposed accidentally/intentionally in radiation field (static exposure) or was exposed while being worn by a worker moving in his workplace (dynamic exposure). The present thermoluminscent (TL) based personnel monitoring systems are not capable of distinguishing between the above stated (static and dynamic) exposure conditions. The feasibility of a new methodology developed using the charge coupled device based imaging technique for identification of the static/dynamic exposure of CaSO4:Dy based TL detectors for low energy photons has been investigated. The techniques for the qualitative and the quantitative assessments of the exposure conditions are presented in this paper. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Influence of Surgical Technique, Performance Status, and Peritonitis Exposure on Surgical Site Infection in Acute Complicated Diverticulitis: A Matched Case-Control Study.

PubMed

Zonta, Sandro; De Martino, Michela; Podetta, Michele; Viganò, Jacopo; Dominioni, Tommaso; Picheo, Roberto; Cobianchi, Lorenzo; Alessiani, Mario; Dionigi, Paolo

2015-10-01

Acute generalized peritonitis secondary to complicated diverticulitis is a life-threatening condition; the standard treatment is surgery. Despite advances in peri-operative care, this condition is accompanied by a high peri-operative complication rate (22%-25%). No definitive evidence is available to recommend a preferred surgical technique in patients with Hinchey stage III/IV disease. A matched case-control study enrolling patients from four surgical units at Italian university hospital was planned to assess the most appropriate surgical treatment on the basis of patient performance status and peritonitis exposure, with the aim of minimizing the surgical site infection (SSI). A series of 1,175 patients undergoing surgery for Hinchey III/IV peritonitis in 2003-2013 were analyzed. Cases (n=145) were selected from among those patients who developed an SSI. control ratio was 1:3. Cases and control groups were matched by age, gender, body mass index, and Hinchey grade. We considered three surgical techniques: T1=Hartman's procedure; T2=sigmoid resection, anastomosis, and ileostomy; and T3=sigmoid resection and anastomosis. Six scoring systems were analyzed to assess performance status; subsequently, patients were divided into low, mild, and high risk (LR, MR, HR) according to the system producing the highest area under the curve. We classified peritonitis exposition as P1=<12 h; P2=12-24 h; P3=>24 h. Univariable and multivariable analyses were performed. The Apgar scoring system defined the risk groups according to performance status. Lowest SSI risk was expected when applying T3 in P1 (OR=0.22), P2 (OR=0.5) for LR and in P1 (OR=0.63) for MR; T2 in P2 (OR=0.5) in LR and in P1 (OR=0.61) in MR; T1 in P3 (OR=0.56) in LR; in P2 (OR=0.63) and P3 (OR=0.54) in MR patients, and in each P subgroup (OR=0.93;0.97;1.01) in HR. Pre-operative assessment based on Apgar scoring system integrated with peritonitis exposure in complicated diverticulitis may offer a ready-to-use tool for reducing SSI-related complications and applying appropriate treatment, reducing the need for disabling ostomy.

Characterization of fluid flow by digital correlation of scattered light

NASA Technical Reports Server (NTRS)

Gilbert, John A.; Matthys, Donald R.

1989-01-01

The objective is to produce a physical system suitable for a space environment that can measure fluid velocities in a three-dimensional volume by the development of a particle correlation velocimetry technique. Experimental studies were conducted on a field test cell to demonstrate the suitability and accuracy of digital correlation techniques for measuring two-dimensional fluid flows. This objective was satisfied by: (1) the design of an appropriate illumination and detection system for making velocity measurements within a test cell; (2) the design and construction of a test cell; (3) the preliminary evaluations on fluid and seeding requirements; and (4) the performance of controlled tests using a multiple exposure correlation technique. This presentation is represented by viewgraphs with very little text.

Exposure therapy for youth with anxiety: Utilization rates and predictors of implementation in a sample of practicing clinicians from across the United States.

PubMed

Reid, Adam M; Guzick, Andrew G; Fernandez, Alyka Glor; Deacon, Brett; McNamara, Joseph P H; Geffken, Gary R; McCarty, Ryan; Striley, Catherine W

2018-06-18

Exposure therapy is a highly effective, evidence-based treatment technique for children and adolescents with anxiety disorders. Regardless, therapists in the community are reported to use exposure relatively rarely compared with other approaches. The goal of the present study was to identify how practicing clinicians treat youth with anxiety disorders across the United States and what factors contribute to their use of exposure therapy. Recruited from public directories, 257 private practice therapists who treat anxious youth were surveyed. Non-exposure cognitive-behavioral techniques like cognitive restructuring and relaxation techniques were used significantly more frequently than exposure. Providers with more training in exposure therapy and fewer negative beliefs about this approach reported using exposure significantly more in the treatment of youth with social anxiety, obsessive-compulsive, and panic disorders. Self-identification as an anxiety disorder specialist significantly predicted exposure use for youth with posttraumatic stress disorder. Most therapists in private practice have minimal training in exposure therapy, perceive a lack of training options, and believe there would be a benefit to acquiring more training. The implications of these findings are discussed, including how to optimally design training opportunities in exposure therapy. Copyright © 2018 Elsevier Ltd. All rights reserved.

Membrane-aerated biofilm proton and oxygen flux during chemical toxin exposure.

PubMed

McLamore, E S; Zhang, W; Porterfield, D M; Banks, M K

2010-09-15

Bioreactors containing sessile bacteria (biofilms) grown on hollow fiber membranes have been used for treatment of many wastestreams. Real time operational control of bioreactor performance requires detailed knowledge of the relationship between bulk liquid water quality and physiological transport at the biofilm-liquid interface. Although large data sets exist describing membrane-aerated bioreactor effluent quality, very little real time data is available characterizing boundary layer transport under physiological conditions. A noninvasive, microsensor technique was used to quantify real time (≈1.5 s) changes in oxygen and proton flux for mature Nitrosomonas europaea and Pseudomonas aeruginosa biofilms in membrane-aerated bioreactors following exposure to environmental toxins. Stress response was characterized during exposure to toxins with known mode of action (chlorocarbonyl cyanide phenyl-hydrazone and potassium cyanide), and four environmental toxins (rotenone, 2,4-dinitrophenol, cadmium chloride, and pentachlorophenol). Exposure to sublethal concentrations of all environmental toxins caused significant increases in O(2) and/or H(+) flux (depending on the mode of action). These real time microscale signatures (i.e., fingerprints) of O(2) and H(+) flux can be coupled with bulk liquid analysis to improve our understanding of physiology in counter-diffusion biofilms found within membrane aerated bioreactors; leading to enhanced monitoring/modeling strategies for bioreactor control.

A PERSISTENT BONE GROWTH DEFICIT IN THE X-IRRADIATED RAT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, R.D.; Kimeldorf, D.J.

1964-02-10

ABS>A critical assessment of the roentgenographic technique was made for a quantitative determination of bone and tail length in the rat. The method was found to be very reliable if error sources were controlled and minimized. The early and long term effects of x irradiation on skeletal growth were investigated with respect to the age at exposure. Rats exposed at a juvenile age (37 days) to a sublethal dose (430 rad) exhibited a retardation in femur, tibia, and tail growth within 14 days after exposure. The maximum deficit was attained within 30 days after exposure and remained approximately constant formore » the next 300 days. Femur and tibia length of animals which were exposed to x rays as young adults (101 days of age) did not differ from those of controls for the first two months after exposure. However, there was a deficit in femur and tibia length in these animals at the end of life span. The magnitude of the bone length reduction at the end of life span was dose dependent. The two major differences in response between the two age groups were the time course of the radiation effect on growth and the magnitude of the deficit. The reduction in bone length occurred faster and was greater in the younger irradiated group. (auth)« less

Whole-body Cryotherapy as a Recovery Technique after Exercise: A Review of the Literature.

PubMed

Rose, Catriona; Edwards, Kate M; Siegler, Jason; Graham, Kenneth; Caillaud, Corinne

2017-12-01

This review aims to evaluate the current body of literature investigating the effect of whole body cryotherapy on recovery after exercise. A systematic search was conducted to investigate the effect of whole body cryotherapy (WBC, exposure to temperatures between -110 to -190°C) on markers of recovery after damaging exercise in healthy, physically active subjects. Of the 16 eligible articles extracted, ten induced muscle damage using controlled exercise in a laboratory setting, while six induced damage during sport-specific training. Results indicated that muscle pain was reduced in 80% of studies following WBC. Two applied studies found recovery of athletic capacity and performance with WBC improved, variables of this nature were also improved in 71% of studies using controlled exercise. Further benefits of WBC treatment included reduction of systemic inflammation and lower concentrations of markers for muscle cell damage. These results suggest that WBC may improve recovery from muscle damage, with multiple exposures more consistently exhibiting improvements in recovery from pain, loss of muscle function, and markers of inflammation and damage. The diversity in muscle damage protocols, exposure timing with regards to exercise, as well as temperatures, duration and frequencies of exposure, make specific recommendations preliminary at present. © Georg Thieme Verlag KG Stuttgart · New York.

Exposures of Sus scrofa to a TASER(®) conducted electrical weapon: no effects on 2-dimensional gel electrophoresis patterns of plasma proteins.

PubMed

Jauchem, James R; Cerna, Cesario Z; Lim, Tiffany Y; Seaman, Ronald L

2014-12-01

In an earlier study, we found significant changes in red-blood-cell, leukocyte, and platelet counts, and in red-blood-cell membrane proteins, following exposures of anesthetized pigs to a conducted electrical weapon. In the current study, we examined potential changes in plasma proteins [analyzed via two-dimensional gel electrophoresis (2-DGE)] following two 30 s exposures of anesthetized pigs (Sus scrofa) to a TASER (®) C2 conducted electrical weapon. Patterns of proteins, separated by 2-DGE, were consistent and reproducible between animals and between times of sampling. We determined that the blood plasma collection, handling, storage, and processing techniques we used are suitable for swine blood. There were no statistically significant changes in plasma proteins following the conducted-electrical-weapon exposures. Overall gel patterns of fibrinogen were similar to results of other studies of both pigs and humans (in control settings, not exposed to conducted electrical weapons). The lack of significant changes in plasma proteins may be added to the body of evidence regarding relative safety of TASER C2 device exposures.

Irradiation resistance of intravolume shading elements embedded in photomasks used for CD uniformity control by local intra-field transmission attenuation

NASA Astrophysics Data System (ADS)

Zait, Eitan; Ben-Zvi, Guy; Dmitriev, Vladimir; Oshemkov, Sergey; Pforr, Rainer; Hennig, Mario

2006-05-01

Intra-field CD variation is, besides OPC errors, a main contributor to the total CD variation budget in IC manufacturing. It is caused mainly by mask CD errors. In advanced memory device manufacturing the minimum features are close to the resolution limit resulting in large mask error enhancement factors hence large intra-field CD variations. Consequently tight CD Control (CDC) of the mask features is required, which results in increasing significantly the cost of mask and hence the litho process costs. Alternatively there is a search for such techniques (1) which will allow improving the intrafield CD control for a given moderate mask and scanner imaging performance. Currently a new technique (2) has been proposed which is based on correcting the printed CD by applying shading elements generated in the substrate bulk of the mask by ultrashort pulsed laser exposure. The blank transmittance across a feature is controlled by changing the density of light scattering pixels. The technique has been demonstrated to be very successful in correcting intra-field CD variations caused by the mask and the projection system (2). A key application criterion of this technique in device manufacturing is the stability of the absorbing pixels against DUV light irradiation being applied during mask projection in scanners. This paper describes the procedures and results of such an investigation. To do it with acceptable effort a special experimental setup has been chosen allowing an evaluation within reasonable time. A 193nm excimer laser with pulse duration of 25 ns has been used for blank irradiation. Accumulated dose equivalent to 100,000 300 mm wafer exposures has been applied to Half Tone PSM mask areas with and without CDC shadowing elements. This allows the discrimination of effects appearing in treated and untreated glass regions. Several intensities have been investigated to define an acceptable threshold intensity to avoid glass compaction or generation of color centers in the glass. The impact of the irradiation on the mask transmittance of both areas has been studied by measurements of the printed CD on wafer using a wafer scanner before and after DUV irradiation.

Reinforcing the role of the conventional C-arm--a novel method for simplified distal interlocking.

PubMed

Windolf, Markus; Schroeder, Josh; Fliri, Ladina; Dicht, Benno; Liebergall, Meir; Richards, R Geoff

2012-01-25

The common practice for insertion of distal locking screws of intramedullary nails is a freehand technique under fluoroscopic control. The process is technically demanding, time-consuming and afflicted to considerable radiation exposure of the patient and the surgical personnel. A new concept is introduced utilizing information from within conventional radiographic images to help accurately guide the surgeon to place the interlocking bolt into the interlocking hole. The newly developed technique was compared to conventional freehand in an operating room (OR) like setting on human cadaveric lower legs in terms of operating time and radiation exposure. The proposed concept (guided freehand), generally based on the freehand gold standard, additionally guides the surgeon by means of visible landmarks projected into the C-arm image. A computer program plans the correct drilling trajectory by processing the lens-shaped hole projections of the interlocking holes from a single image. Holes can be drilled by visually aligning the drill to the planned trajectory. Besides a conventional C-arm, no additional tracking or navigation equipment is required.Ten fresh frozen human below-knee specimens were instrumented with an Expert Tibial Nail (Synthes GmbH, Switzerland). The implants were distally locked by performing the newly proposed technique as well as the conventional freehand technique on each specimen. An orthopedic resident surgeon inserted four distal screws per procedure. Operating time, number of images and radiation time were recorded and statistically compared between interlocking techniques using non-parametric tests. A 58% reduction in number of taken images per screw was found for the guided freehand technique (7.4 ± 3.4) (mean ± SD) compared to the freehand technique (17.6 ± 10.3) (p < 0.001). Total radiation time (all 4 screws) was 55% lower for the guided freehand technique compared to conventional freehand (p = 0.001). Operating time per screw (from first shot to screw tightened) was on average 22% reduced by guided freehand (p = 0.018). In an experimental setting, the newly developed guided freehand technique for distal interlocking has proven to markedly reduce radiation exposure when compared to the conventional freehand technique. The method utilizes established clinical workflows and does not require cost intensive add-on devices or extensive training. The underlying principle carries potential to assist implant positioning in numerous other applications within orthopedics and trauma from screw insertions to placement of plates, nails or prostheses.

A study of the diffusional behavior of a two-phase metal matrix composite exposed to a high temperature environment

NASA Technical Reports Server (NTRS)

Tenney, D. R.

1974-01-01

The progress of diffusion-controlled filament-matrix interaction in a metal matrix composite where the filaments and matrix comprise a two-phase binary alloy system was studied by mathematically modeling compositional changes resulting from prolonged elevated temperature exposure. The analysis treats a finite, diffusion-controlled, two-phase moving-interface problem by means of a variable-grid finite-difference technique. The Ni-W system was selected as an example system. Modeling was carried out for the 1000 to 1200 C temperature range for unidirectional composites containing from 6 to 40 volume percent tungsten filaments in a Ni matrix. The results are displayed to show both the change in filament diameter and matrix composition as a function of exposure time. Compositional profiles produced between first and second nearest neighbor filaments were calculated by superposition of finite-difference solutions of the diffusion equations.

Lysosomal membrane stability of the mussel, Mytilus galloprovincialis (L.), as a biomarker of tributyltin exposure.

PubMed

Okoro, Hussein K; Snyman, Reinette G; Fatoki, Olalekan S; Adekola, Folahan A; Ximba, Bhekumusa J; Slabber, Michelle Y

2015-05-01

The effect of tributyltin (TBT) on the stability of hemocytic lysosome membranes of the mussel, Mytilus galloprovincialis, and the use thereof as a biomarker of TBT-induced stress, was investigated. Mussels were exposed to 0.1 and 1.0 µg/L tributyltin respectively for 4 weeks. Lysosomal membrane stability of hemocytes was tested weekly by means of the neutral red retention time (NRRT) assay, after which the mussel samples were analyzed for TBT content. The two exposed groups exhibited significantly increased (p < 0.05) whole body TBT concentrations with concomitant significant decreases (p < 0.05) in NRRT (R(2) values of 0.85 and 0.971 for lower and higher exposure groups, respectively). The higher exposure group showed a typical dose-response curve. For the control, no TBT was detected and NRRT remained stable. It was concluded that the NRRT assay could be considered as a useful technique, and lysosomal membrane destabilization a useful early warning and cellular biomarker of stress due to TBT exposure in M. galloprovincialis.

EXTRAPOLATION TECHNIQUES EVALUATING 24 HOURS OF AVERAGE ELECTROMAGNETIC FIELD EMITTED BY RADIO BASE STATION INSTALLATIONS: SPECTRUM ANALYZER MEASUREMENTS OF LTE AND UMTS SIGNALS.

PubMed

Mossetti, Stefano; de Bartolo, Daniela; Veronese, Ivan; Cantone, Marie Claire; Cosenza, Cristina; Nava, Elisa

2017-04-01

International and national organizations have formulated guidelines establishing limits for occupational and residential electromagnetic field (EMF) exposure at high-frequency fields. Italian legislation fixed 20 V/m as a limit for public protection from exposure to EMFs in the frequency range 0.1 MHz-3 GHz and 6 V/m as a reference level. Recently, the law was changed and the reference level must now be evaluated as the 24-hour average value, instead of the previous highest 6 minutes in a day. The law refers to a technical guide (CEI 211-7/E published in 2013) for the extrapolation techniques that public authorities have to use when assessing exposure for compliance with limits. In this work, we present measurements carried out with a vectorial spectrum analyzer to identify technical critical aspects in these extrapolation techniques, when applied to UMTS and LTE signals. We focused also on finding a good balance between statistically significant values and logistic managements in control activity, as the signal trend in situ is not known. Measurements were repeated several times over several months and for different mobile companies. The outcome presented in this article allowed us to evaluate the reliability of the extrapolation results obtained and to have a starting point for defining operating procedures. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Electromagnetic navigation reduces surgical time and radiation exposure for proximal interlocking in retrograde femoral nailing.

PubMed

Somerson, Jeremy S; Rowley, David; Kennedy, Chad; Buttacavoli, Frank; Agarwal, Animesh

2014-07-01

To compare the time required for proximal locking screw placement between a standard freehand technique and the navigated technique, and to quantify the reduction in ionizing radiation exposure. A fresh frozen cadaver model was used for 48 proximal interlocking screw procedures. Each procedure consisted of insertion of 2 anteroposterior locking screws. Standard fluoroscopic technique was used for 24 procedures, and an electromagnetic navigation system was used for the remaining 24 procedures. Procedure duration was recorded using an electronic timer and radiation doses were documented. Mean total insertion time for both proximal interlocking screws was 405 ± 165.7 seconds with the freehand technique and 311 ± 78.3 seconds in the navigation group (P = 0.002). All procedures resulted in successful locking screw placement. Mean ionizing radiation exposure time for proximal locking was 29.5 ± 12.8 seconds. Proximal locking screw insertion using the navigation technique evaluated in this work was significantly faster than the standard fluoroscopic method. The navigated technique is effective and has the potential to prevent ionizing radiation exposure.

[Virtual reality therapy in anxiety disorders].

PubMed

Mitrousia, V; Giotakos, O

2016-01-01

During the last decade a number of studies have been conducted in order to examine if virtual reality exposure therapy can be an alternative form of therapy for the treatment of mental disorders and particularly for the treatment of anxiety disorders. Imaginal exposure therapy, which is one of the components of Cognitive Behavioral Therapy, cannot be easily applied to all patients and in cases like those virtual reality can be used as an alternative or a supportive psychotherapeutic technique. Most studies using virtual reality have focused on anxiety disorders, mainly in specific phobias, but some extend to other disorders such as eating disorders, drug dependence, pain control and palliative care and rehabilitation. Main characteristics of virtual reality therapy are: "interaction", "immersion", and "presence". High levels of "immersion" and "presence" are associated with increased response to exposure therapy in virtual environments, as well as better therapeutic outcomes and sustained therapeutic gains. Typical devices that are used in order patient's immersion to be achieved are the Head-Mounted Displays (HMD), which are only for individual use, and the computer automatic virtual environment (CAVE), which is a multiuser. Virtual reality therapy's disadvantages lie in the difficulties that arise due to the demanded specialized technology skills, devices' cost and side effects. Therapists' training is necessary in order for them to be able to manipulate the software and the hardware and to adjust it to each case's needs. Devices' cost is high but as technology continuously improves it constantly decreases. Immersion during virtual reality therapy can induce mild and temporary side effects such as nausea, dizziness or headache. Until today, however, experience shows that virtual reality offers several advantages. Patient's avoidance to be exposed in phobic stimuli is reduced via the use of virtual reality since the patient is exposed to them as many times as he wishes and under the supervision of the therapist. The technique takes place in the therapist's office which ensures confidentiality and privacy. The therapist is able to control unpredicted events that can occur during patient's exposure in real environments. Mainly the therapist can control the intensity of exposure and adapt it to the patient's needs. Virtual reality can be proven particularly useful in some specific psychological states. For instance, patients with post-traumatic stress disorder (PTSD) who prone to avoid the reminders of the traumatic events. Exposure in virtual reality can solve this problem providing to the patient a large number of stimuli that activate the senses causing the necessary physiological and psychological anxiety reactions, regardless of his willingness or ability to recall in his imagination the traumatic event.

Therapists' and patients' stress responses during graduated versus flooding in vivo exposure in the treatment of specific phobia: A preliminary observational study.

PubMed

Schumacher, Sarah; Miller, Robert; Fehm, Lydia; Kirschbaum, Clemens; Fydrich, Thomas; Ströhle, Andreas

2015-12-15

Exposure therapy is considered an effective treatment strategy for phobic anxiety, however, it is rarely applied in clinical practice. The under-usage might be due to various factors of which heightened stress levels not only in patients but also in therapists are presumed to be of particular relevance. The present study aimed to investigate whether different forms of exposure might lead to varying physiological and psychological stress responses in therapists and phobic patients. 25 patients with specific phobia underwent individual cognitive behavioural therapy, performed by 25 psychotherapist trainees, applying exposure sessions in graduated form or the flooding technique. Patients and therapists provided subjective evaluations of stress and five saliva samples for analysis of salivary cortisol and alpha-amylase either during two graduated exposure sessions or during one flooding session, while a regular therapy session served as control condition. Therapists displayed heightened salivary alpha-amylase release during exposure of the flooding, but not the graduated, type. Patients showed elevated salivary cortisol during flooding exposure numerically, however, not on a statistically significant level. Therapists reported more pronounced subjective stress during flooding compared to graduated exposure. Elevated stress levels should be addressed in clinical training in order to improve application of exposure in routine practice. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Analytical methods in multivariate highway safety exposure data estimation

DOT National Transportation Integrated Search

1984-01-01

Three general analytical techniques which may be of use in : extending, enhancing, and combining highway accident exposure data are : discussed. The techniques are log-linear modelling, iterative propor : tional fitting and the expectation maximizati...

Evaluation of Ahmed glaucoma valve implantation through a needle-generated scleral tunnel in Mexican children with glaucoma.

PubMed

Albis-Donado, Oscar; Gil-Carrasco, Félix; Romero-Quijada, Rafael; Thomas, Ravi

2010-01-01

To evaluate the results and extrusion rates of the Ahmed glaucoma valve (AGV) implantation through a needle-generated scleral tunnel, without a tube-covering patch, in children. A retrospective review of the charts of 106 Mexican children implanted with 128 AGVs operated between 1994 and 2002, with the needle track technique, at our institution, with at least six months follow up was done. Main outcome measures were intraocular pressure (IOP) control, tube extrusions or exposure and other complications. Kaplan-Meier analysis demonstrated a 96.9% survival rate at six months, 82.4% at one year, 78.7% at two years, 70% at three years and 41.6% at four years. Total success at the last follow-up (IOP between 6 and 21 mm Hg without medications) was achieved in 30 eyes (23.5%), 58 eyes (45.3%) had qualified success (only topical hypotensive drugs) and 40 eyes (31.3%) were failures. The mean pre- and post-operative IOP at the last follow up was 28.4 mmHg (SD 9.3) and 14.5 mmHg (SD 6.3), respectively. No tube extrusions or exposures were observed. Tube-related complications included five retractions, a lens touch and a transitory endothelial touch. The risk of failure increased if the eye had any complication or previous glaucoma surgeries. Medium-term IOP control in Mexican children with glaucoma can be achieved with AGV implantation using a needle-generated tunnel, without constructing a scleral flap or using a patch to cover the tube. There were no tube extrusions, nor any tube exposures with this technique.

Sensitivity analysis for direct and indirect effects in the presence of exposure-induced mediator-outcome confounders

PubMed Central

Chiba, Yasutaka

2014-01-01

Questions of mediation are often of interest in reasoning about mechanisms, and methods have been developed to address these questions. However, these methods make strong assumptions about the absence of confounding. Even if exposure is randomized, there may be mediator-outcome confounding variables. Inference about direct and indirect effects is particularly challenging if these mediator-outcome confounders are affected by the exposure because in this case these effects are not identified irrespective of whether data is available on these exposure-induced mediator-outcome confounders. In this paper, we provide a sensitivity analysis technique for natural direct and indirect effects that is applicable even if there are mediator-outcome confounders affected by the exposure. We give techniques for both the difference and risk ratio scales and compare the technique to other possible approaches. PMID:25580387

Exploring Surface Analysis Techniques for the Detection of Molecular Contaminants on Spacecraft

NASA Technical Reports Server (NTRS)

Rutherford, Gugu N.; Seasly, Elaine; Thornblom, Mark; Baughman, James

2016-01-01

Molecular contamination is a known area of concern for spacecraft. To mitigate this risk, projects involving space flight hardware set requirements in a contamination control plan that establishes an allocation budget for the exposure of non-volatile residues (NVR) onto critical surfaces. The purpose of this work will focus on non-contact surface analysis and in situ monitoring to mitigate molecular contamination on space flight hardware. By using Scanning Electron Microscopy and Energy Dispersive Spectroscopy (SEM-EDS) with Raman Spectroscopy, an unlikely contaminant was identified on space flight hardware. Using traditional and surface analysis methods provided the broader view of the contamination sources allowing for best fit solutions to prevent any future exposure.

Influence of infrasound exposure on the whole L-type calcium currents in rat ventricular myocytes.

PubMed

Pei, Zhaohui; Zhuang, Zhiqiang; Xiao, Pingxi; Chen, Jingzao; Sang, Hanfei; Ren, Jun; Wu, Zhenbiao; Yan, Guangmei

2009-06-01

This study was designed to examine the effect of infrasound exposure (5 Hz at 130 dB) on whole-cell L-type Ca2+ currents (WLCC) in rat ventricular myocytes and the underlying mechanism(s) involved. Thirty-two adult Sprague-Dawley rats were randomly assigned to infrasound exposure and control groups. [Ca2+](i), WLCC, mRNA expression of the a(1c) subunit of L-type Ca2+ channels (LCC), and SERCA2 protein were examined on day 1, 7, and 14 after initiation of infrasound exposure. Fluo-3/AM fluorescence and the laser scanning confocal microscope techniques were used to measure [Ca2+](i) in freshly isolated ventricular myocytes. The Ca2+ fluorescence intensity (FI), denoting [Ca2+](i) in cardiomyocytes, was significantly elevated in a time-dependent manner in the exposure groups. There was a significant increase in WLCC in the 1-day group and a further significant increase in the 7- and 14-day groups. LCC mRNA expression measured by RT-PCR revealed a significant rise in the 1-day group and a significant additional rise in the 7- and 14-day groups compared with control group. SERCA2 expression was significantly upregulated in the 1-day group followed by an overt decrease in the 7- and 14-day groups. Prolonged exposure of infrasound altered WLCC in rat cardiomyocytes by shifting the steady-state inactivation curves to the right (more depolarized direction) without altering the slope and biophysical properties of I (Ca,L). Taken together, our data suggest that changes in [Ca2+](I) levels as well as expression of LCC and SERCA2 may contribute to the infrasound exposure-elicited cardiac response.

An investigation of the source of air Ar contamination in KAr dating

USGS Publications Warehouse

Mussett, A.E.; Brent, Dalrymple G.

1968-01-01

Precision of young KAr ages is limited by air argon contamination. A series of experiments in which the exposure of basalt and sanidine samples to air argon was controlled, shows that most of the air contamination does not arise in the laboratory. Because of this, it seems unlikely that air argon contamination can be significantly reduced by special sample handling and preparation techniques. ?? 1968.

Human rabies surveillance and control in China, 2005-2012.

PubMed

Song, Miao; Tang, Qing; Rayner, Simon; Tao, Xiao-Yan; Li, Hao; Guo, Zhen-Yang; Shen, Xin-Xin; Jiao, Wen-Tao; Fang, Wei; Wang, Jun; Liang, Guo-Dong

2014-04-18

Rabies reemerged in China during the 1990s with a gradual increase in the number and geographical dispersion of cases. As a consequence, a national surveillance program was introduced in 2005 to investigate the outbreak in terms of vaccination coverage, PEP treatment, and geographical and social composition. The surveillance program was coordinated at the national level by the Chinese Center for Disease Control (CCDC) with data collected by regional health centres and provincial CCDCs, and from other official sources. Various statistical and multivariate analysis techniques were then used to evaluate the role and significance of implemented policies and strategies related to rabies prevention and control over this period. From 2005-2012, 19,221 cases were reported across 30 provinces, but these primarily occurred in rural areas of southern and eastern China, and were predominantly associated with farmers, students and preschool children. In particular, detailed analysis of fatalities reported from 2010 to 2011 shows they were associated with very low rates of post exposure treatment compared to the cases with standard PEP. Nevertheless, regulation of post-exposure prophylaxis quality, together with improved management and vaccination of domesticated animals, has improved prevention and control of rabies. The various control policies implemented by the government has played a key role in reducing rabies incidences in China. However, level of PEP treatment varies according to sex, age, degree and site of exposure, as well as the source of infection. Regulation of PEP quality together with improved management and vaccination of domesticated animals have also helped to improve prevention and control of rabies.

Human rabies surveillance and control in China, 2005–2012

PubMed Central

2014-01-01

Background Rabies reemerged in China during the 1990s with a gradual increase in the number and geographical dispersion of cases. As a consequence, a national surveillance program was introduced in 2005 to investigate the outbreak in terms of vaccination coverage, PEP treatment, and geographical and social composition. Methods The surveillance program was coordinated at the national level by the Chinese Center for Disease Control (CCDC) with data collected by regional health centres and provincial CCDCs, and from other official sources. Various statistical and multivariate analysis techniques were then used to evaluate the role and significance of implemented policies and strategies related to rabies prevention and control over this period. Results From 2005–2012, 19,221 cases were reported across 30 provinces, but these primarily occurred in rural areas of southern and eastern China, and were predominantly associated with farmers, students and preschool children. In particular, detailed analysis of fatalities reported from 2010 to 2011 shows they were associated with very low rates of post exposure treatment compared to the cases with standard PEP. Nevertheless, regulation of post-exposure prophylaxis quality, together with improved management and vaccination of domesticated animals, has improved prevention and control of rabies. Conclusions The various control policies implemented by the government has played a key role in reducing rabies incidences in China. However, level of PEP treatment varies according to sex, age, degree and site of exposure, as well as the source of infection. Regulation of PEP quality together with improved management and vaccination of domesticated animals have also helped to improve prevention and control of rabies. PMID:24742224

[Principles of antisepsis, disinfection and sterilization].

PubMed

Hernández-Navarrete, María-Jesús; Celorrio-Pascual, José-Miguel; Lapresta Moros, Carlos; Solano Bernad, Victor-Manuel

2014-12-01

This article aims to provide a brief review of the main concepts on which the prevention and control of infection are based. Antisepsis comprises a set of techniques aimed at the total sterilization, or at most, disinfection, removing germs that contaminate an environment. Both procedures must be preceded by an environmental cleanup in the location in which they intend to be applied. The disinfection is carried out using biocides or germicides. Antimicrobial chemicals, that have mechanisms of action and resistances very similar to antibiotics, are generating concern due to the possibility of crossing genetic information that aggravates the problem of bacterial resistance. Most biocides can act as antiseptics, and applied to skin tissue, or disinfectants on inanimate materials. The spectrum of action of germicides depends on the product itself and external controllable factors: temperature, concentration, exposure time, etc. Sterilization techniques are primarily physical, by exposing the material to steam, or sterilizing gas, using autoclaves. Major advances are the use of low temperatures with shorter exposure times, in parallel with technological advances in instrumentation in order to avoid high temperatures and high use rotations due to workload. Copyright © 2014 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

Mutation rates at the glycophorin A and HPRT loci in uranium miners exposed to radon progeny.

PubMed Central

Shanahan, E M; Peterson, D; Roxby, D; Quintana, J; Morely, A A; Woodward, A

1996-01-01

OBJECTIVES--To find whether a relation exists between estimated levels of exposure to radon and its progeny and mutations in hypoxanthine phosphoribosyl transferase (HPRT) and glycophorin A in a cohort of former uranium miners. METHODS--A cohort study involving a sample of miners from the Radium Hill uranium mine in South Australia, which operated from 1952 to 1961. Radiation exposures underground at Radium Hill were estimated from historical radon gas measures with a job exposure matrix. Workers from the mine who worked exclusively above ground according to mine records were selected as controls. In 1991-2 miners were interviewed and blood taken for measurement of somatic mutations. Mutation rates for HPRT and glycophorin A were estimated with standard assay techniques. RESULTS--Homozygous mutations of glycophorin A were increased in underground miners (P = 0.0027) and the mutation rate tended to rise with increasing exposure with the exception of the highest exposure (> 10 working level months). However, there was no association between place of work and either the hemizygous mutations of glycophorin A or the HPRT mutation. CONCLUSIONS--There may be an association between glycophorin A mutations and previous occupational exposure to ionising radiation. However, not enough is known at present to use these assays as biomarkers for historical exposure in underground mining cohorts. PMID:8704866

Cholinergic Synaptic Transmissions Were Altered after Single Sevoflurane Exposure in Drosophila Pupa

PubMed Central

Chen, Rongfa; Zhang, Tao; Kuang, Liting; Chen, Zhen; Ran, Dongzhi; Niu, Yang; Gu, Huaiyu

2015-01-01

Purpose. Sevoflurane, one of the most used general anesthetics, is widely used in clinical practice all over the world. Previous studies indicated that sevoflurane could induce neuron apoptosis and neural deficit causing query in the safety of anesthesia using sevoflurane. The present study was designed to investigate the effects of sevoflurane on electrophysiology in Drosophila pupa whose excitatory neurotransmitter is acetylcholine early after sevoflurane exposure using whole brain recording technique. Methods. Wide types of Drosophila (canton-s flies) were allocated to control and sevoflurane groups randomly. Sevoflurane groups (1% sevoflurane; 2% sevoflurane; 3% sevoflurane) were exposed to sevoflurane and the exposure lasted 5 hours, respectively. All flies were subjected to electrophysiology experiment using patch clamp 24 hours after exposure. Results. The results showed that, 24 hours after sevoflurane exposure, frequency but not the amplitude of miniature excitatory postsynaptic currents (mEPSCs) was significantly reduced (P < 0.05). Furthermore, we explored the underlying mechanism and found that calcium currents density, which partially regulated the frequency of mEPSCs, was significantly reduced after sevoflurane exposure (P < 0.05). Conclusions. All these suggested that sevoflurane could alter the mEPSCs that are related to synaptic plasticity partially through modulating calcium channel early after sevoflurane exposure. PMID:25705662

Impact of Hurricane Exposure on Reproductive Health Outcomes, Florida, 2004.

PubMed

Grabich, Shannon C; Robinson, Whitney R; Konrad, Charles E; Horney, Jennifer A

2017-08-01

Prenatal hurricane exposure may be an increasingly important contributor to poor reproductive health outcomes. In the current literature, mixed associations have been suggested between hurricane exposure and reproductive health outcomes. This may be due, in part, to residual confounding. We assessed the association between hurricane exposure and reproductive health outcomes by using a difference-in-difference analysis technique to control for confounding in a cohort of Florida pregnancies. We implemented a difference-in-difference analysis to evaluate hurricane weather and reproductive health outcomes including low birth weight, fetal death, and birth rate. The study population for analysis included all Florida pregnancies conceived before or during the 2003 and 2004 hurricane season. Reproductive health data were extracted from vital statistics records from the Florida Department of Health. In 2004, 4 hurricanes (Charley, Frances, Ivan, and Jeanne) made landfall in rapid succession; whereas in 2003, no hurricanes made landfall in Florida. Overall models using the difference-in-difference analysis showed no association between exposure to hurricane weather and reproductive health. The inconsistency of the literature on hurricane exposure and reproductive health may be in part due to biases inherent in pre-post or regression-based county-level comparisons. We found no associations between hurricane exposure and reproductive health. (Disaster Med Public Health Preparedness. 2017;11:407-411).

Pleomorphic Adenoma of Base of Tongue: Is Midline Mandibulotomy Necessary for Approaching Benign Base Tongue Lesions?

PubMed Central

Bansal, Sandeep; Kalsotra, Gopika; Mohammed, Abdul Wadood; Bahl, Amanjit; Gupta, Ashok K.

2012-01-01

Objective. To report a rare presentation of pleomorphic adenoma, at base tongue, excised surgically by a transoral midline glossotomy technique without mandibulotomy. Case Report. Pleomorphic adenoma is a benign tumor of the salivary gland found rarely in the base of tongue. Surgery is the definitive treatment for this tumor, and different approaches have been mentioned in the literature. In our case we surgically excised the tumor by a transoral midline glossotomy technique without mandibulotomy where we combined the cosmetic advantage of transoral technique and the exposure advantage of a glossotomy technique. Discussion. We discuss the different approaches to oropharynx, their advantages and disadvantages. Primary transoral approach provides better cosmesis but less exposure whereas median labiomandibuloglossotomy approach provides more exposure but is cosmetically unacceptable. Conclusion. A transoral midline glossotomy approach without mandibulotomy provides wide exposure with acceptable cosmesis. PMID:22953125

Control of methicillin-resistant Staphylococcus aureus in planktonic form and biofilms: a biocidal efficacy study of nonthermal dielectric-barrier discharge plasma.

PubMed

Joshi, Suresh G; Paff, Michelle; Friedman, Gary; Fridman, Greg; Fridman, Alexander; Brooks, Ari D

2010-05-01

Bacterial contamination of surfaces with methicillin-resistant Staphylococcus aureus (MRSA) is a serious problem in the hospital environment and is responsible for significant nosocomial infections. The pathogenic contaminants form biofilms, which are difficult to treat with routine biocides. Thus, a continuous search for novel disinfection methods is essential for effective infection control measures. This demonstration of a novel technique for the control of virulent pathogens in planktonic form as well as in established biofilms may provide a progressive alternative to standard methodology. We evaluated a novel technique of normal atmospheric nonthermal plasma known as floating-electrode dielectric-barrier discharge (FE-DBD) plasma against a control of planktonic and biofilm forms of Escherichia coli, S aureus, multidrug-resistant methicillin-resistant S aureus (MRSA) -95 (clinical isolate), -USA300, and -USA400, using widely accepted techniques such as colony count assay, LIVE/DEAD BacLight Bacterial Viability assay, and XTT (2,3-Bis(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) assay. Exposure of free living planktonic forms of E coli, S aureus, and MRSA were rapidly inactivated by DBD plasma. Approximately 10(7) bacterial cells were completely (100%) killed, whereas 10(8) and 10(9) were reduced by approximately 90% to 95% and 40% to 45%, respectively, in less than 60 seconds (7.8 J/cm(2)) and completely disinfected in < or =120 seconds. In established biofilms, the susceptibility of MRSA USA400 was comparable with USA300 but less susceptible than MRSA95 (clinical isolate), S aureus, and E coli (P < .05) to FE-DBD plasma, and plasma was able to kill MRSA more than 60% within 15 seconds (1.95 J/cm(2)). The killing responses were plasma exposure-time dependent, and cell density dependent. The plasma was able disinfect surfaces in a less than 120 seconds. Application of DBD plasma can be a valuable decontamination technique for the removal of planktonic and biofilm-embedded bacteria such as MRSA -USA 300, -USA 400, methicillin-sensitive S aureus (MSSA), and E coli, the more common hospital contaminants. Of interest, E coli was more resistant than S aureus phenotypes. Copyright (c) 2010 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

High brightness--multiple beamlets source for patterned X-ray production

DOEpatents

Leung, Ka-Ngo [Hercules, CA; Ji, Qing [Albany, CA; Barletta, William A [Oakland, CA; Jiang, Ximan [El Cerrito, CA; Ji, Lili [Albany, CA

2009-10-27

Techniques for controllably directing beamlets to a target substrate are disclosed. The beamlets may be either positive ions or electrons. It has been shown that beamlets may be produced with a diameter of 1 .mu.m, with inter-aperture spacings of 12 .mu.m. An array of such beamlets, may be used for maskless lithography. By step-wise movement of the beamlets relative to the target substrate, individual devices may be directly e-beam written. Ion beams may be directly written as well. Due to the high brightness of the beamlets from extraction from a multicusp source, exposure times for lithographic exposure are thought to be minimized. Alternatively, the beamlets may be electrons striking a high Z material for X-ray production, thereafter collimated to provide patterned X-ray exposures such as those used in CAT scans. Such a device may be used for remote detection of explosives.

VizieR Online Data Catalog: Extrasolar planet HD 189733b whitelight curve (Crouzet+, 2014)

NASA Astrophysics Data System (ADS)

Crouzet, N.; McCullough, P. R.; Deming, D.; Madhusudhan, N.

2017-05-01

We used HST WFC3 with the newly implemented spatial scanning mode, developed in part to enable observations such as these (McCullough & MacKenty, 2012wfc..rept....8M). In this mode, a controlled scan is applied to the telescope during the exposure in a direction perpendicular to the wavelength dispersion direction (Figure 1). This technique is particularly efficient for bright stars such as HD 189733 (see McCullough et al. 2014ApJ...791...55M, for more details). One eclipse of HD 189733b was observed on 2013 June 24. The observations are divided into five HST orbits, the planetary eclipse occurring during the fourth orbit. In total, 159 exposures of 5.97 s each were acquired, corresponding to 32 exposures per orbit (except for the first orbit in which the first image is a direct image). (1 data file).

Survival of infectious microorganisms in space cabin environments

NASA Technical Reports Server (NTRS)

Vana, S. C.; Ehrlich, R.

1974-01-01

Aerosol survival and virulence of S. aureus and P. aeruginosa cultures isolated during exposure to simulated space cabin environment was studied using the microthread captured aerosol technique. The aerosol survival of P. aeruginosa isolates did not differ significantly from that of the original culture from which the isolates were obtained. The mean death rate of the isolates was 1.03%/min and that of the controls 1.10%/min. Similarly exposure to the 5 psi environment did not affect the virulence of P. aeruginosa. Both strains of S. aureus (IITRI and NASA) after exposure to 5 psi environment showed some degree of adaptation to this environmental stress. The aerosol death rates of the isolated organisms were 5 to 10-fold lower than of the original cultures. At the same time the virulence of the isolates was approximately 5-fold higher than that of the original culture.

Hair as an alternative matrix in bioanalysis.

PubMed

Barbosa, Joana; Faria, Juliana; Carvalho, Félix; Pedro, Madalena; Queirós, Odília; Moreira, Roxana; Dinis-Oliveira, Ricardo Jorge

2013-04-01

Alternative matrices are steadily gaining recognition as biological samples for toxicological analyses. Hair presents many advantages over traditional matrices, such as urine and blood, since it provides retrospective information regarding drug exposure, can distinguish between chronic and acute or recent drug use by segmental analysis, is easy to obtain, and has considerable stability for long periods of time. For this reason, it has been employed in a wide variety of contexts, namely to evaluate workplace drug exposure, drug-facilitated sexual assault, pre-natal drug exposure, anti-doping control, pharmacological monitoring and alcohol abuse. In this article, issues concerning hair structure, collection, storage and analysis are reviewed. The mechanisms of drug incorporation into hair are briefly discussed. Analytical techniques for simultaneous drug quantification in hair are addressed. Finally, representative examples of drug quantification using hair are summarized, emphasizing its potentialities and limitations as an alternative biological matrix for toxicological analyses.

Radiation-modified natural zeolites for cleaning liquid nuclear waste (irradiation against radioactivity)

PubMed Central

Yeritsyan, Hrant; Sahakyan, Aram; Harutyunyan, Vachagan; Nikoghosyan, Sergey; Hakhverdyan, Eleonora; Grigoryan, Norair; Hovhannisyan, Aghasi; Atoyan, Vovik; Keheyan, Yeghis; Rhodes, Christopher

2013-01-01

There have been comparatively few investigations reported of radiation effects in zeolites, although it is known that these materials may be modified substantially by exposure to ionizing radiation. Thus, by exposure to γ-rays or high-energy particles, the charge states of atoms may be changed so to create, and accumulate, lattice point defects, and to form structurally disordered regions. Such a technique may permit the creation, in a controlled fashion, of additionally useful properties of the material while preserving its essential stoichiometry and structure. Accordingly, we present an application, in which the cation-exchange capacity of a natural zeolite (clinoptilolite) is substantially enhanced, for the treatment/decontamination of water contaminated with radionuclides e.g. 134Cs, 137Cs and 90Sr, by its exposure to high-energy (8 MeV) electrons, and to different total doses. PMID:24132177

Tenon advancement and duplication technique to prevent postoperative Ahmed valve tube exposure in patients with refractory glaucoma.

PubMed

Tamcelik, Nevbahar; Ozkok, Ahmet; Sarıcı, Ahmet Murat; Atalay, Eray; Yetik, Huseyin; Gungor, Kivanc

2013-07-01

To present and compare the long-term results of Dr. Tamcelik's previously described technique of Tenon advancement and duplication with the conventional Ahmed glaucoma valve (AGV) implantation technique in patients with refractory glaucoma. This study was a multicenter, retrospective case series that included 303 eyes of 276 patients with refractory glaucoma who underwent glaucoma valve implantation surgery. The patients were divided into three groups according to the surgical technique applied and the outcomes compared. In group 1, 96 eyes of 86 patients underwent AGV implant surgery without patch graft; in group 2, 78 eyes of 72 patients underwent AGV implant surgery with donor scleral patch; in group 3, 129 eyes of 118 patients underwent Ahmed valve implant surgery with "combined short scleral tunnel with Tenon advancement and duplication technique". The endpoint assessed was tube exposure through the conjunctiva. In group 1, conjunctival tube exposure was seen in 11 eyes (12.9 %) after a mean 9.2 ± 3.7 years of follow-up. In group 2, conjunctival tube exposure was seen in six eyes (2.2 %) after a mean 8.9 ± 3.3 years of follow-up. In group 3, there was no conjunctival exposure after a mean 7.8 ± 2.8 years of follow-up. The difference between the groups was statistically significant. (P = 0.0001, Chi-square test). This novel surgical technique combining a short scleral tunnel with Tenon advancement and duplication was found to be effective and safe to prevent conjunctival tube exposure after AGV implantation surgery in patients with refractory glaucoma.

UNCERTAINTY ON RADIATION DOSES ESTIMATED BY BIOLOGICAL AND RETROSPECTIVE PHYSICAL METHODS.

PubMed

Ainsbury, Elizabeth A; Samaga, Daniel; Della Monaca, Sara; Marrale, Maurizio; Bassinet, Celine; Burbidge, Christopher I; Correcher, Virgilio; Discher, Michael; Eakins, Jon; Fattibene, Paola; Güçlü, Inci; Higueras, Manuel; Lund, Eva; Maltar-Strmecki, Nadica; McKeever, Stephen; Rääf, Christopher L; Sholom, Sergey; Veronese, Ivan; Wieser, Albrecht; Woda, Clemens; Trompier, Francois

2018-03-01

Biological and physical retrospective dosimetry are recognised as key techniques to provide individual estimates of dose following unplanned exposures to ionising radiation. Whilst there has been a relatively large amount of recent development in the biological and physical procedures, development of statistical analysis techniques has failed to keep pace. The aim of this paper is to review the current state of the art in uncertainty analysis techniques across the 'EURADOS Working Group 10-Retrospective dosimetry' members, to give concrete examples of implementation of the techniques recommended in the international standards, and to further promote the use of Monte Carlo techniques to support characterisation of uncertainties. It is concluded that sufficient techniques are available and in use by most laboratories for acute, whole body exposures to highly penetrating radiation, but further work will be required to ensure that statistical analysis is always wholly sufficient for the more complex exposure scenarios.

Genotoxicity of cadmium chloride in the marine gastropod Nerita chamaeleon using comet assay and alkaline unwinding assay.

PubMed

Sarkar, Anupam; Bhagat, Jacky; Ingole, Baban S; Rao, Durga P; Markad, Vijaykumar L

2015-02-01

This paper presents an evaluation of the genotoxic effects of cadmium chloride (CdCl2 ) on marine gastropod, Nerita chamaeleon following the technique of comet assay and the DNA alkaline unwinding assay (DAUA). In this study, the extent of DNA damage in gill cells of N. chamaeleon was measured after in vivo exposure to four different concentrations (10, 25, 50, and 75 µg/L) of CdCl2 . In vitro exposure of hydrogen peroxide (H2 O2 ; 1, 10, 25, and 50 µM) of the gill cells showed a significant increase in the percentage tail DNA, Olive tail moment, and tail length (TL). Significant changes in percentage tail DNA by CdCl2 exposure were observed in all exposed groups of snails with respect to those in control. Exposure to 75 µg/L of CdCl2 produced significant decrease in DNA integrity as measured by DAUA at all duration with respect to control. In vivo exposure to different concentrations of CdCl2 (10, 25, 50, and 75 µg/L) to N. chamaeleon showed considerable increase in DNA damage as observed by both alkaline comet assay and the DAUA. The extent of DNA damage in marine gastropods determined by the application of alkaline comet assay and DAUA clearly indicated the genotoxic responses of marine gastropod, N. chamaeleon to a wide range of cadmium concentration in the marine environment. © 2013 Wiley Periodicals, Inc.

Biological indicators of exposure to total and respirable aluminium dust fractions in a primary aluminium smelter.

PubMed Central

Röllin, H B; Theodorou, P; Cantrell, A C

1996-01-01

OBJECTIVES: The study attempts to define biological indicators of aluminium uptake and excretion in workers exposed to airborne aluminium compounds in a primary aluminium smelter. Also, this study defines the total and respirable aluminium dust fractions in two different potrooms, and correlates their concentrations with biological indicators in this group of workers. METHODS: Air was sampled at defined work sites. Non-destructive and conventional techniques were used to find total and respirable aluminium content of the dust. Blood and urine was collected from 84 volunteers employed at various work stations throughout the smelter and from two different cohorts of controls matched for sex, age, and socioeconomic status. Aluminium in serum samples and urine specimens was measured by flameless atomic absorption with a PE 4100 ZL spectrometer. RESULTS: The correlation of aluminium concentrations in serum and urine samples with the degree of exposure was assessed for three arbitrary exposure categories; low (0.036 mg Al/m3), medium (0.35 mg Al/m3) and high (1.47 mg Al/m3) as found in different areas of the smelter. At medium and high exposure, the ratio of respirable to total aluminium in the dust samples varied significantly. At high exposure, serum aluminium, although significantly raised, was still within the normal range of an unexposed population. The workers with low exposure excreted aluminium in urine at levels significantly higher than the controls, but still within the normal range of the population. However, potroom workers with medium and high exposure had significantly higher urinary aluminium than the normal range. CONCLUSIONS: It is concluded that only urinary aluminium constitutes a practical index of occupational exposure at or above 0.35 mg Al/m3, and that the respirable fraction of the dust may play a major role in the biological response to exposure to aluminium in a smelter environment. PMID:8758038

Marine disposal of radioactive wastes

NASA Astrophysics Data System (ADS)

Woodhead, D. S.

1980-03-01

In a general sense, the main attraction of the marine environment as a repository for the wastes generated by human activities lies in the degree of dispersion and dilution which is readily attainable. However, the capacity of the oceans to receive wastes without unacceptable consequences is clearly finite and this is even more true of localized marine environments such as estuaries, coastal waters and semi-enclosed seas. Radionuclides have always been present in the marine environment and marine organisms and humans consuming marine foodstuffs have always been exposed, to some degree, to radiation from this source. The hazard associated with ionizing radiations is dependent upon the absorption of energy from the radiation field within some biological entity. Thus any disposal of radioactive wastes into the marine environment has consequences, the acceptability of which must be assessed in terms of the possible resultant increase in radiation exposure of human and aquatic populations. In the United Kingdom the primary consideration has been and remains the safe-guarding of public health. The control procedures are therefore designed to minimize as far as practicable the degree of human exposure within the overall limits recommended as acceptable by the International Commission on Radiological Protection. There are several approaches through which control could be exercised and the strengths and weaknesses of each are considered. In this review the detailed application of the critical path technique to the control of the discharge into the north-east Irish Sea from the fuel reprocessing plant at Windscale is given as a practical example. It will be further demonstrated that when human exposure is controlled in this way no significant risk attaches to the increased radiation exposure experienced by populations of marine organisms in the area.

Determinants of dermal exposure among Nicaraguan subsistence farmers during pesticide applications with backpack sprayers.

PubMed

Blanco, Luis E; Aragón, Aurora; Lundberg, Ingvar; Lidén, Carola; Wesseling, Catharina; Nise, Gun

2005-01-01

Identification of pesticide exposure determinants has become an issue in explaining exposure variability and improving control measures. Most studies have been conducted in industrialized countries. The aim of this study was to identify relevant dermal exposure determinants among Nicaraguan subsistence farmers. Field data on possible determinants were collected during 32 pesticide applications through observation and supplementary videorecording. A multistep reduction strategy brought down the 110 potential exposure determinants to 27 variables, which were grouped as worksite, spray equipment, working practices, clothing or hygiene practices related. Dermal exposure was quantified with a modification of Fenske's visual scoring method. Multivariate linear regression modeling within groups and across groups was performed. In the within-group analyses, work practices, spray equipment and worksite related determinants explained 52, 33 and 25% of the exposure variability, respectively. Clothing and hygiene practices were weaker determinants and did not always reduce the exposure. The final model included determinants from all groups except hygiene practices and explained 69% of the exposure variability. A less restricted model increased the explained variability to 75%. Several novel determinants were identified, including spraying on a muddy terrain, dew on plants, sealing the tank lid with a cloth and wiping sweat from the face. This study showed that a combination of observation and visual scoring techniques can provide valuable information on determinants of pesticide exposure and affected body parts under developing country conditions. The results could be used to develop job-specific questionnaires and to design training and preventive programs.

Radiation- and reference base-free navigation procedure for placement of instruments and implants: application to retrograde drilling of osteochondral lesions of the knee joint.

PubMed

Müller, Matthias; Gras, Florian; Marintschev, Ivan; Mückley, Thomas; Hofmann, Gunter O

2009-01-01

A novel, radiation- and reference base-free procedure for placement of navigated instruments and implants was developed and its practicability and precision in retrograde drillings evaluated in an experimental setting. Two different guidance techniques were used: One experimental group was operated on using the radiation- and reference base-free navigation technique (Fluoro Free), and the control group was operated on using standard fluoroscopy for guidance. For each group, 12 core decompressions were simulated by retrograde drillings in different artificial femurs following arthroscopic determination of the osteochondral lesions. The final guide-wire position was evaluated by postoperative CT analysis using vector calculation. High precision was achieved in both groups, but operating time was significantly reduced in the navigated group as compared to the control group. This was due to a 100% first-pass accuracy of drilling in the navigated group; in the control group a mean of 2.5 correction maneuvers per drilling were necessary. Additionally, the procedure was free of radiation in the navigated group, whereas 17.2 seconds of radiation exposure time were measured in the fluoroscopy-guided group. The developed Fluoro Free procedure is a promising and simplified approach to navigating different instruments as well as implants in relation to visually or tactilely placed pointers or objects without the need for radiation exposure or invasive fixation of a dynamic reference base in the bone.

Treatment adherence among low-income, African American children with persistent asthma.

PubMed

Celano, Marianne P; Linzer, Jeffrey F; Demi, Alice; Bakeman, Roger; Smith, Chaundrissa Oyeshiku; Croft, Shannon; Kobrynski, Lisa J

2010-04-01

The study aims to assess medication adherence and asthma management behaviors and their modifiable predictors in low-income children with persistent asthma. The authors conducted a cohort study of 143 children ages 6 to 11 prescribed a daily inhaled controller medicine that could be electronically monitored. Children were recruited from clinics or the emergency department of an urban children's hospital. Data were collected at baseline (T1) and 1 year later (T2). Outcome measures were adherence to controller medications as measured by electronic monitoring devices, observed metered-dose inhaler and spacer technique, exposure to environmental tobacco smoke, and attendance at appointments with primary health care provider. Medication adherence rates varied across medications, with higher rates for montelukast than for fluticasone. Eleven percent to 15% of children demonstrated metered dose inhaler and spacer technique suggesting no drug delivery, and few (5% to 6%) evidenced significant exposure to environmental tobacco smoke. Less than half of recommended health care visits were attended over the study interval. Few psychosocial variables were associated with adherence at T1 or in the longitudinal analyses. Fluticasone adherence at T2 was predicted by caregiver asthma knowledge. A substantial number of low-income children with persistent asthma receive less than half of their prescribed inhaled controller agent. Patients without Medicaid, with low levels of caregiver asthma knowledge, or with caregivers who began childrearing at a young age may be at highest risk for poor medication adherence.

Biomarkers of human exposure to pesticides.

PubMed Central

Anwar, W A

1997-01-01

For centuries, several hundred pesticides have been used to control insects. These pesticides differ greatly in their mode of action, uptake by the body, metabolism, elimination from the body, and toxicity to humans. Potential exposure from the environment can be estimated by environmental monitoring. Actual exposure (uptake) is measured by the biological monitoring of human tissues and body fluids. Biomarkers are used to detect the effects of pesticides before adverse clinical health effects occur. Pesticides and their metabolites are measured in biological samples, serum, fat, urine, blood, or breast milk by the usual analytical techniques. Biochemical responses to environmental chemicals provide a measure of toxic effect. A widely used biochemical biomarker, cholinesterase depression, measures exposure to organophosphorus insecticides. Techniques that measure DNA damage (e.g., detection of DNA adducts) provide a powerful tool in measuring environmental effects. Adducts to hemoglobin have been detected with several pesticides. Determination of chromosomal aberration rates in cultured lymphocytes is an established method of monitoring populations occupationally or environmentally exposed to known or suspected mutagenic-carcinogenic agents. There are several studies on the cytogenetic effects of work with pesticide formulations. The majority of these studies report increases in the frequency of chromosomal aberrations and/or sister chromatid exchanges among the exposed workers. Biomarkers will have a major impact on the study of environmental risk factors. The basic aim of scientists exploring these issues is to determine the nature and consequences of genetic change or variation, with the ultimate purpose of predicting or preventing disease. PMID:9255564

Methodology Series Module 2: Case-control Studies

PubMed Central

Setia, Maninder Singh

2016-01-01

Case-Control study design is a type of observational study. In this design, participants are selected for the study based on their outcome status. Thus, some participants have the outcome of interest (referred to as cases), whereas others do not have the outcome of interest (referred to as controls). The investigator then assesses the exposure in both these groups. The investigator should define the cases as specifically as possible. Sometimes, definition of a disease may be based on multiple criteria; thus, all these points should be explicitly stated in case definition. An important aspect of selecting a control is that they should be from the same ‘study base’ as that of the cases. We can select controls from a variety of groups. Some of them are: General population; relatives or friends; and hospital patients. Matching is often used in case-control control studies to ensure that the cases and controls are similar in certain characteristics, and it is a useful technique to increase the efficiency of the study. Case-Control studies can usually be conducted relatively faster and are inexpensive – particularly when compared with cohort studies (prospective). It is useful to study rare outcomes and outcomes with long latent periods. This design is not very useful to study rare exposures. Furthermore, they may also be prone to certain biases – selection bias and recall bias. PMID:27057012

IDENTIFICATION OF TIME-INTEGRATED SAMPLING AND MEASUREMENT TECHNIQUES TO SUPPORT HUMAN EXPOSURE STUDIES

EPA Science Inventory

Accurate exposure classification tools are required to link exposure with health effects in epidemiological studies. Long-term, time-integrated exposure measures would be desirable to address the problem of developing appropriate residential childhood exposure classifications. ...

An Experimental Comparison of Techniques: Cognitive Defusion, Cognitive Restructuring, and in-vivo Exposure for Social Anxiety.

PubMed

Barrera, Terri L; Szafranski, Derek D; Ratcliff, Chelsea G; Garnaat, Sarah L; Norton, Peter J

2016-03-01

One of the primary differences between Cognitive Behavioral Therapy (CBT) and Acceptance and Commitment Therapy (ACT) for anxiety is the approach to managing negative thoughts. CBT focuses on challenging the accuracy of dysfunctional thoughts through cognitive restructuring exercises, whereas ACT attempts to foster acceptance of such thoughts through cognitive defusion exercises. Previous research suggests that both techniques reduce the distress associated with negative thoughts, though questions remain regarding the benefit of these techniques above and beyond exposure to feared stimuli. In the present study, we conducted a brief experimental intervention to examine the utility of cognitive defusion + in-vivo exposure, cognitive restructuring + in-vivo exposure, and in-vivo exposure alone in reducing the impact of negative thoughts in patients with social anxiety disorder. All participants completed a brief public speaking exposure and those in the cognitive conditions received training in the assigned cognitive technique. Participants returned a week later to complete a second exposure task and self-report measures. All three conditions resulted in similar decreases in discomfort related to negative thoughts. ANOVA models failed to find an interaction between change in accuracy or importance and assignment to condition in predicting decreased distress of negative thoughts. These preliminary results suggest that changes in perceived importance and accuracy of negative thoughts may not be the mechanisms by which cognitive defusion and cognitive restructuring affect distress in the short-term.

Atomic Oxygen Treatment Technique for Removal of Smoke Damage from Paintings

NASA Technical Reports Server (NTRS)

Rutledge, S. K.; Banks, B. A.

1997-01-01

Soot deposits that can accumulate on surfaces of a painting during a fire can be difficult to clean from some types of paintings without damaging the underlying paint layers. A non-contact technique has been developed which can remove the soot by allowing a gas containing atomic oxygen to flow over the surface and chemically react with the soot to form carbon monoxide and carbon dioxide. The reaction is limited to the surface, so the underlying paint is not touched. The process can be controlled so that the cleaning can be stopped once the paint surface is reached. This paper describes the smoke exposure and cleaning of untreated canvas, acrylic gesso, and sections of an oil painting using this technique. The samples were characterized by optical microscopy and reflectance spectroscopy.

Brain magnetic resonance imaging and manganese concentrations in red blood cells of smelting workers: Search for biomarkers of manganese exposure

PubMed Central

Jiang, Yueming; Zheng, Wei; Long, Liling; Zhao, Weijia; Li, Xiangrong; Mo, Xuean; Lu, Jipei; Fu, Xue; Li, Wenmei; Liu, Shouting; Long, Quanyong; Huang, Jinli; Pira, Enrico

2014-01-01

The MRI technique has been used in diagnosis of manganism in humans and non-human primates. This cross-sectional study was designed to explore whether the pallidal signal intensity in T1-weighted MRI correlated with Mn levels in the blood compartment among Mn-exposed workers and to understand to what extent the MRI signal could reflect Mn exposure. A group of 18 randomly selected male Mn-exposed workers of which 13 were smelting workers with high exposure (mean of airborne Mn in work place: 1.26 mg/m3; range: 0.31–2.93 mg/m3), and 5 power distribution control workers with low exposure (0.66 mg/m3 and 0.23–0.77 mg/m3) from a ferroalloy factory, and another group of 9 male subjects as controls from a non-smelting factory who were office or cafeteria workers (0.01 mg/m3 and 0–0.03 mg/m3) were recruited for neurological tests, MRI examination, and analysis of Mn in whole blood (MnB), plasma (MnP) or red blood cells (MnRBC). No clinical symptoms and signs of manganism were observed among these workers. MRI data showed average increases of 7.4% (p < 0.05) and 16.1% (p < 0.01) in pallidal index (PI) among low- and high-exposed workers, respectively, as compared to controls. Fourteen out of 18 Mn-exposed workers (78%) had intensified PI values, while this proportion was even higher (85%) among the high Mn-exposed workers. Among exposed workers, the PI values were significantly associated with MnRBC (r = 0.55, p = 0.02). Our data suggest that the workers exposed to airborne Mn, but without clinical symptoms, display an exposure-related, intensified MRI signal. The MRI, as well as MnRBC, may be useful in early diagnosis of Mn exposure. PMID:16978697

Brain magnetic resonance imaging and manganese concentrations in red blood cells of smelting workers: search for biomarkers of manganese exposure.

PubMed

Jiang, Yueming; Zheng, Wei; Long, Liling; Zhao, Weijia; Li, Xiangrong; Mo, Xuean; Lu, Jipei; Fu, Xue; Li, Wenmei; Liu, Shouting; Long, Quanyong; Huang, Jinli; Pira, Enrico

2007-01-01

The MRI technique has been used in diagnosis of manganism in humans and non-human primates. This cross-sectional study was designed to explore whether the pallidal signal intensity in T1-weighted MRI correlated with Mn levels in the blood compartment among Mn-exposed workers and to understand to what extent the MRI signal could reflect Mn exposure. A group of 18 randomly selected male Mn-exposed workers of which 13 were smelting workers with high exposure (mean of airborne Mn in work place: 1.26 mg/m3; range: 0.31-2.93 mg/m3), and 5 power distribution control workers with low exposure (0.66 mg/m3 and 0.23-0.77 mg/m3) from a ferroalloy factory, and another group of 9 male subjects as controls from a non-smelting factory who were office or cafeteria workers (0.01 mg/m3 and 0-0.03 mg/m3) were recruited for neurological tests, MRI examination, and analysis of Mn in whole blood (MnB), plasma (MnP) or red blood cells (MnRBC). No clinical symptoms and signs of manganism were observed among these workers. MRI data showed average increases of 7.4% (p<0.05) and 16.1% (p<0.01) in pallidal index (PI) among low- and high-exposed workers, respectively, as compared to controls. Fourteen out of 18 Mn-exposed workers (78%) had intensified PI values, while this proportion was even higher (85%) among the high Mn-exposed workers. Among exposed workers, the PI values were significantly associated with MnRBC (r=0.55, p=0.02). Our data suggest that the workers exposed to airborne Mn, but without clinical symptoms, display an exposure-related, intensified MRI signal. The MRI, as well as MnRBC, may be useful in early diagnosis of Mn exposure.

A comparative physical evaluation of four X-ray films.

PubMed

Egyed, M; Shearer, D R

1981-09-01

In this study, four general purpose radiographic films (Agfa Gevaert Curix RP-1, duPont Cronex 4, Fuji RX, and Kodak XRP-1) were compared using three independent techniques. By examining the characteristic curves for the four films, film speed and contrast were compared over the diagnostically useful density range. These curves were generated using three methods: (1) irradiation of a standard film cassette lined with high-speed screens, covered by a twelve-step aluminum wedge; (2) direct exposure of film strips to an electro-luminescent sensitometer; and (3) direct irradiation of a standard film cassette lined with high-speed screens. The latter technique provided quantitative values for film speed and relative contrast. All three techniques provided virtually properly identical results and indicate that under properly controlled conditions simplified methods of film testing can give results equivalent to those obtained by more sophisticated techniques.

Abnormal Canine Bone Development Associated with Hypergravity Exposure

NASA Technical Reports Server (NTRS)

Morgan, J. P.; Fisher, G. L.; McNeill, K. L.; Oyama, J.

1979-01-01

Chronic centrifugation of 85- to 92-day-old Beagles at 2.0 x g and 2.6 x g for 26 weeks during the time of active skeletal growth caused skeletal abnormalities in the radius and the ulna of ten of 11 dogs. The pattern of change mimicked that found in naturally occurring and experimentally induced premature distal ulnar physeal closure or delayed growth at this physis. Minimal changes in bone density were detected by sensitive photon absorptiometric techniques. Skeletal abnormalities also were found in five of the six cage-control dogs, although the run-control dogs were radiographically normal.

Tracking live cell response to cadmium (II) concentrations by scanning electrochemical microscopy.

PubMed

Henderson, Jeffrey D; Filice, Fraser P; Li, Michelle S M; Ding, Zhifeng

2016-05-01

The biological chemistry of toxic heavy metals, such as Cd (II), has become an active area of research due to connections with increased oxidative stress, cytotoxicity, and human/animal carcinogenicity. In this study, scanning electrochemical microscopy (SECM) was used as a noninvasive technique to monitor membrane permeability of single live human bladder cancer cells (T24) subjected to exposure of Cd (II) at various concentrations. The addition of a membrane permeable redox mediator, ferrocenemethanol (FcMeOH), in combination with depth scan imaging provided probe approach curves (PACs) to reveal changes in membrane homeostasis. To demonstrate the strength of SECM as a bioanalytical technique for cell physiology and pathology, we tested responses of live cells after 1h incubations with various concentrations of Cd (II). For the first time, a trend in membrane permeability of Cd (II) treated live T24 cells was discovered. Dependent on the incubation concentration, the trend displayed an initial decrease in membrane permeability coefficient from 75μm/s for control cells to 25μm/s for cells incubated with 75μM Cd (II). This was followed by an eventual return to the permeability coefficient of control cells (75μm/s) with further increases in Cd (II) exposure. The cells were found to respond at as little as 10μM Cd (II) concentrations. This work further demonstrates the use of SECM as a bioanalytical technique to monitor cell physiology and topography. A greater insight into the complex mechanisms behind Cd (II) toxicity is anticipated. Copyright © 2015 Elsevier Inc. All rights reserved.

Effects of Presowing Pulsed Electromagnetic Treatment of Tomato Seed on Growth, Yield, and Lycopene Content

PubMed Central

Efthimiadou, Aspasia; Katsenios, Nikolaos; Papastylianou, Panayiota; Triantafyllidis, Vassilios; Travlos, Ilias; Bilalis, Dimitrios J.

2014-01-01

The use of magnetic field as a presowing treatment has been adopted by researchers as a new environmental friendly technique. The aim of this study was to determine the effect of magnetic field exposure on tomato seeds covering a range of parameters such as transplanting percentage, plant height, shoot diameter, number of leaves per plant, fresh weight, dry weight, number of flowers, yield, and lycopene content. Pulsed electromagnetic field was used for 0, 5, 10, and 15 minutes as a presowing treatment of tomato seeds in a field experiment for two years. Papimi device (amplitude on the order of 12.5 mT) has been used. The use of pulsed electromagnetic field as a presowing treatment was found to enhance plant growth in tomato plants at certain duration of exposure. Magnetic field treatments and especially the exposure of 10 and 15 minutes gave the best results in all measurements, except plant height and lycopene content. Yield per plant was higher in magnetic field treatments, compared to control. MF-15 treatment yield was 80.93% higher than control treatment. Lycopene content was higher in magnetic field treatments, although values showed no statistically significant differences. PMID:25097875

Stereoselective bioaccumulation of chiral PCB 91 in earthworm and its metabolomic and lipidomic responses.

PubMed

He, Zeying; Wang, Yuehua; Zhang, Yanwei; Cheng, Haiyan; Liu, Xiaowei

2018-07-01

Stereoselective bioaccumulation, elimination, metabolomic and lipidomic responses of earthworm Eisenia fetida exposed to chiral polychlorinated biphenyl (PCB) 91 in an earthworm-soil system were investigated. Preferential bioaccumulation of (-)-PCB 91 and elimination of (+)-PCB 91 were observed following 50 and 500 μg/kg dwt exposures. Enantiomer fraction (EF) values decreased over time during the uptake and elimination periods. Metabolomics and lipidomics techniques based on ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS) revealed significant changes in 108 metabolites after earthworms exposure to (+)-, (-)-, and (±)-PCB 91, compared to control groups. Forty two of these metabolites were identified as amino acids, nucleosides, fatty acids, dicarboxylic acids, vitamins or others. Lysophospholipids including six lysophosphatidylcholines (LPC), six lysophosphatidylethanolamine (LPE), eight lysophosphatidylinositol (LPI) and five lysophosphatidylserine (LPS) were also differentially expressed between exposure and control groups. Alterations in the levels of metabolites and lipids indicated stereoselective effects of chiral PCB 91 on earthworm amino acid, energy, and nucleotide metabolism, neurodevelopment and gene expression. Overall, the effects of (+)-PCB 91 were more pronounced than that of (-)- and (±)-PCB 91. Copyright © 2018 Elsevier Ltd. All rights reserved.

Experience With Laser Safety In The USA--A Review

NASA Astrophysics Data System (ADS)

Sliney, David H.

1986-10-01

Following several research programs in the 1960's aimed at studying the adverse biological effects of lasers and other optical radiation sources, laser occupational exposure limits were set and general safety standards were developed. Today, the experience from laser accidents and the development of new lasers and new applications have altered the format of the exposure limits and the safety procedures. It is critically important to distinguish between different biological injury mechanisms. The biological effects of ultraviolet radiation upon the skin and eye are additive over a period of at least one workday, and require different safety procedures. The scattered UV irradiance from excimer lasers may be quite hazardous, depending upon wavelength and action spectra. Since laser technology is young, the exposure of an individual in natural sunlight must be studied to evaluate the potential for chronic effects. The safety measures necessary in the use of lasers depend upon a hazard evaluation. The appropriate control measures and alternate means of enclosure, baffling, and operational control measures are presented. Present laser safety standards are explained briefly. Eye protective techniques and eyewear are considered for a variety of sources. The optical properties of enclosure materials are also discussed.

A prospective randomised trial of probiotics in critically ill patients.

PubMed

McNaught, Clare E; Woodcock, Nicholas P; Anderson, Alexander D G; MacFie, John

2005-04-01

Probiotics exert a beneficial effect on the host through modulation of gastrointestinal microflora. The aim of this study was to investigate the effect of the probiotic Lactobacillus plantarum 299v on gut barrier function and the systemic inflammatory response in critically ill patients. One hundred and three critically ill patients were randomised to receive an oral preparation containing L. plantarum 299v (ProViva) in addition to conventional therapy (treatment group, n = 52) or conventional therapy alone (control group, n = 51). Serial outcome measures included gastric colonisation, intestinal permeability (lactulose/rhamnose dual-sugar probe technique), endotoxin exposure (IgM EndoCAb), C-reactive protein and Interleukin 6 levels. L. plantarum had no identifiable effect on gastric colonisation, intestinal permeability, endotoxin exposure or serum CRP levels. There were no differences between the groups in terms of septic morbidity or mortality. On day 15 serum IL-6 levels were significantly lower in the treatment group compared to controls. The enteral administration of L. plantarum 299v to critically ill patients was associated with a late attenuation of the systemic inflammatory response. This was not accompanied by any significant changes in the intestinal microflora, intestinal permeability, endotoxin exposure, septic morbidity or mortality.

A new 9T global shutter pixel with CDS technique

NASA Astrophysics Data System (ADS)

Liu, Yang; Ma, Cheng; Zhou, Quan; Wang, Xinyang

2015-04-01

Benefiting from motion blur free, Global shutter pixel is very widely used in the design of CMOS image sensors for high speed applications such as motion vision, scientifically inspection, etc. In global shutter sensors, all pixel signal information needs to be stored in the pixel first and then waiting for readout. For higher frame rate, we need very fast operation of the pixel array. There are basically two ways for the in pixel signal storage, one is in charge domain, such as the one shown in [1], this needs complicated process during the pixel fabrication. The other one is in voltage domain, one example is the one in [2], this pixel is based on the 4T PPD technology and normally the driving of the high capacitive transfer gate limits the speed of the array operation. In this paper we report a new 9T global shutter pixel based on 3-T partially pinned photodiode (PPPD) technology. It incorporates three in-pixel storage capacitors allowing for correlated double sampling (CDS) and pipeline operation of the array (pixel exposure during the readout of the array). Only two control pulses are needed for all the pixels at the end of exposure which allows high speed exposure control.

Electron Beam Lithography Double Step Exposure Technique for Fabrication of Mushroom-Like Profile in Bilayer Resist System

NASA Astrophysics Data System (ADS)

Kornelia, Indykiewicz; Bogdan, Paszkiewicz; Tomasz, Szymański; Regina, Paszkiewicz

2015-01-01

The Hi/Lo bilayer resist system exposure in e-beam lithography (EBL) process, intended for mushroom-like profile fabrication, was studied. Different exposure parameters and theirs influence on the resist layers were simulated in CASINO software and the obtained results were compared with the experimental data. The AFM technique was used for the estimation of the e-beam penetration depth in the resist stack. Performed numerical and experimental results allow us to establish the useful ranges of the exposure parameters.

Biochemical effects of lead exposure on battery manufacture workers with reference to blood pressure, calcium metabolism and bone mineral density.

PubMed

Dongre, Nilima N; Suryakar, Adinath N; Patil, Arun J; Hundekari, Indira A; Devarnavadagi, Basavaraj B

2013-01-01

Lead is one of the most widely scattered toxic metals in the environment and used by mankind for over 9,000 years. Lead in the environment may be derived from natural or anthropogenic sources. In humans, lead can cause a wide range of biological effects depending upon the level and duration of exposure. The purpose of this study was to find out the effect of lead exposure on systolic and diastolic blood pressure, serum calcium, ionized calcium, phosphorus, parathyroid hormone and vitamin D and examine the overall effect of all these parameters on the bone mineral density of battery manufacture workers. For this study ninety battery manufacture workers were selected and divided in three groups depending upon duration of lead exposure. Group I-workers with duration of lead exposure 1-5 years, Group II-workers with duration of lead exposure 6-10 years and Group III-workers with duration of lead exposure more than 10 years. Each group consisted of thirty workers. Thirty age matched healthy control subjects were taken for comparison. Demographic, occupational and clinical data were collected by using questionnaire and interview. The venous blood samples were collected from the study groups and normal healthy control group. At the time of blood collection random urine samples were collected in amber coloured bottles. The biochemical parameters were estimated by using standard assay procedures. Statistical analysis of the data was done using independent student't' test for parametric variables. Values were expressed as mean ± standard deviation (SD). P values of 0.05 or less were considered to be statistically significant. The blood lead levels and urinary lead levels of all workers were significantly increased (P < 0.001) in proportion to the duration of lead exposure as compared to controls. Systolic and diastolic blood pressure were significantly raised (P < 0.001) in all three study groups of battery manufacture workers as compared to controls. Serum Calcium, Ionized calcium, phosphorus were significantly decreased (P < 0.001) in all the three study groups. Serum vitamin D levels were lowered (P < 0.01) and serum PTH was increased (P < 0.01) in workers as compared to controls. The results of this study clearly indicate that the absorption of lead is more in these workers which adversely affects blood pressure, disturbs calcium and phosphorus metabolism which further impairs mineralization of bone resulting in decreased bone mineral density observed in these workers. Lead toxicity is still persistent in battery manufacture workers though they are using sophisticated techniques in these industries. There is a need to protect the workers from the health hazards of occupational lead exposure.

Survey report: control technology for autobody repair and painting shops at Church Brother's Collision Repair, Greenwood, Indiana, October 10-11, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heitbrink, W.A.; Cooper, T.C.; Edmonds, M.A.

1992-03-01

A study was made to evaluate and document the effectiveness of a metal inert gas (MIG) welder with built in ventilation to control potentially hazardous conditions at Church Brother's Collision Repair (SIC-7531), Greenwood, Indiana. Air contaminant exposures were measured during a 1 hour repair job while using a ventilated MIG welder and while using a conventional MIG welder. The ventilation system of the MIG did reduce worker exposure to welding fumes. However, the sampling was done on a single repair job, thus limiting the conclusions which can be drawn from the study. Some welding fumes were not captured by themore » ventilated welder, suggesting that the MIG with ventilation provided incomplete control of the generated fumes. In some cases the metal on the other side of the welding area became sufficiently hot to generate its own fumes. The car body itself appears to block the capture of these fumes by the ventilated MIG welder. When welding inside the car without the ventilated welder, the fumes generated were more concentrated than those generated by welding outside of the car under similar conditions. There is a decreased dilution of the fumes inside the car due to a lack of air movement. The authors conclude that while the control technique appeared to lessen exposure to welding fumes, additional investigation is needed to verify the data.« less

A pilot study investigating whether focusing on body functionality can protect women from the potential negative effects of viewing thin-ideal media images.

PubMed

Alleva, Jessica M; Veldhuis, Jolanda; Martijn, Carolien

2016-06-01

This pilot study explored whether focusing on body functionality (i.e., everything the body can do) can protect women from potential harmful effects of exposure to thin-ideal images. Seventy women (Mage=20.61) completed an assignment wherein they either described the functionality of their body or the routes that they often travel (control). Afterward, participants were exposed to a series of thin-ideal images. Appearance and functionality satisfaction were measured before the assignment; appearance and functionality satisfaction, self-objectification, and body appreciation were measured after exposure. Results showed that participants who focused on body functionality experienced greater functionality satisfaction and body appreciation compared to control participants. Therefore, focusing on body functionality could be a beneficial individual-level technique that women can use to protect and promote a positive body image in the face of thin-ideal images. Research including a condition wherein participants are exposed to (product-only) control images is necessary to draw firmer conclusions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Cytogenetic effects in workers occupationally exposed to tobacco dust.

PubMed

Umadevi, B; Swarna, M; Padmavathi, P; Jyothi, A; Reddy, P P

2003-03-03

Tobacco dust mainly contains nitrosamines, which are readily absorbed by the body tissues like skin, respiratory epithelium, and mucous membrane of mouth, nose and intestines. Exposure to tobacco dust is known to affect the respiratory tracts in humans. In the present study, cytogenetic effects of exposure to tobacco dust are evaluated in 154 male tobacco factory workers and 138 age and sex matched controls by analysing chromosomal aberrations in their peripheral blood lymphocytes. The workers were in the age group of 20-55 years and were employed in the tobacco processing factory for 1-32 years. Heparinised blood samples were collected from workers and control subjects and lymphocyte cultures were carried out by using standard technique. Slides were prepared and 150 metaphases were screened for each sample for various structural and numerical types of abnormalities. A statistically significant increase was observed in the frequencies of chromosomal aberrations in non-smoking and smoking exposed groups when compared to the respective controls. An increase in the frequencies of chromosomal aberrations was also observed with increase in years of service in the exposed subjects.

Engineering out the noise.

PubMed

Yankaskas, Kurt; Fischer, Raymond; Spence, Jesse; Komrower, Jeffrey

2017-06-01

The US Navy, through an Office of Naval Research (ONR) lead effort on Noise Induced Hearing Loss (NIHL), is investigating methods and techniques to mitigate hearing loss for the crews and warfighters. Hearing protection is a viable and increasingly popular method of reducing hearing exposure for many ship crew members; however, it has limitations on comfort and low frequency effectiveness. Furthermore, Personal Hearing Protection (PHP) is often used improperly. Proper vessel planning, programmatic changes and advances in noise control engineering can also have significant impacts by inherently reducing noise exposure through ship design and use of noise control treatments. These impacts go beyond hearing loss mitigation since they can improve quality of life onboard vessels and provide enhanced warfighter performance. Such approaches also can be made to work in the lower frequency range where hearing protection is not as effective. This paper describes non-hearing protection methods being implemented to mitigate and control noise within the US Navy and US Marine Corps. These approaches reflect the latest changes to Mil-Std 1474E, Appendix F. Copyright © 2017 Elsevier B.V. All rights reserved.

Mortality among Canadian military personnel exposed to low-dose radiation.

PubMed

Raman, S; Dulberg, C S; Spasoff, R A; Scott, T

1987-05-15

We carried out a cohort study of mortality among 954 Canadian military personnel exposed to low-dose ionizing radiation during nuclear reactor clean-up operations at Chalk River Nuclear Laboratories, Chalk River, Ont., and during observation of atomic test blasts in the United States and Australia in the 1950s. Two controls matched for age, service, rank and trade were selected for each exposed subject. Mortality among the exposed and control groups was ascertained by means of record linkage with the Canadian Mortality Data Base. Survival analysis with life-table techniques did not reveal any difference in overall mortality between the exposed and control groups. Analysis of cause-specific mortality showed similar mortality patterns in the two groups; there was no elevation in the exposed group in the frequency of death from leukemia or thyroid cancer, the causes of death most often associated with radiation exposure. Analysis of survival by recorded gamma radiation dose also did not show any effect of radiation dose on mortality. The findings are in agreement with the current scientific literature on the risk of death from exposure to low-dose radiation.

Biological effects of low-dose ionizing radiation exposure on interventional cardiologists.

PubMed

Zakeri, F; Hirobe, T; Akbari Noghabi, K

2010-09-01

Interventional cardiologists (ICs) are likely to receive high radiation exposure as a result of procedures they undertake. To assess the effects of low-dose X-ray radiation exposure on chromosomal damage and on selected indices of cellular and humoral immunity in ICs. The study population consisted of 37 ICs and 37 clinical physicians as the control group with similar age, sex and duration of employment, without any work-related exposure to ionizing radiation. Cytogenetic studies were performed by chromosome aberration analysis and immunological studies by flow cytometry, enzyme-linked immunosorbent assay and immunodiffusion techniques. The frequencies of aberrant cells, chromosome breaks and dicentrics plus centric rings were significantly higher in the exposed group compared to the control group (P < 0.05; P < 0.01; P < 0.001, respectively), without positive correlation between the frequency of dicentric and centric ring aberrations and the cumulative doses of the ICs (r = 0.24, not significant). A significant increase was observed in the expression of activation marker CD69 on TCD4(+) stimulated cells in serum immunoglobulin G and interleukin (IL)-2 (P < 0.05) and a significant decrease in serum IL-10 (P < 0.05) in the ICs compared with that of the control group. There was no statistical difference between the two groups in terms of number of white blood cells and lymphocytes, CD3(+), CD4(+) and CD8(+) T cells, CD19(+) and CD16(+) 56(+) cells and concentrations of interferon (IFN)-gamma, IL-4, IL-6 and IL-8 cytokines. While cytogenetic results show higher chromosomal damage, some immune responses are stimulated or modulated immunologically in ICs.

Evaluation of digital radiography practice using exposure index tracking

PubMed Central

Zhou, Yifang; Allahverdian, Janet; Nute, Jessica L.; Lee, Christina

2016-01-01

Some digital radiography (DR) detectors and software allow for remote download of exam statistics, including image reject status, body part, projection, and exposure index (EI). The ability to have automated data collection from multiple DR units is conducive to a quality control (QC) program monitoring institutional radiographic exposures. We have implemented such a QC program with the goal to identify outliers in machine radiation output and opportunities for improvement in radiation dose levels. We studied the QC records of four digital detectors in greater detail on a monthly basis for one year. Although individual patient entrance skin exposure varied, the radiation dose levels to the detectors were made to be consistent via phototimer recalibration. The exposure data stored on each digital detector were periodically downloaded in a spreadsheet format for analysis. EI median and standard deviation were calculated for each protocol (by body part) and EI histograms were created for torso protocols. When histograms of EI values for different units were compared, we observed differences up to 400 in average EI (representing 60% difference in radiation levels to the detector) between units nominally calibrated to the same EI. We identified distinct components of the EI distributions, which in some cases, had mean EI values 300 apart. Peaks were observed at the current calibrated EI, a previously calibrated EI, and an EI representing computed radiography (CR) techniques. Our findings in this ongoing project have allowed us to make useful interventions, from emphasizing the use of phototimers instead of institutional memory of manual techniques to improvements in our phototimer calibration. We believe that this QC program can be implemented at other sites and can reveal problems with radiation levels in the aggregate that are difficult to identify on a case‐by‐case basis. PACS number(s): 87.59.bf PMID:27929507

Prenatal coke: what's behind the smoke? Prenatal cocaine/alcohol exposure and school-age outcomes: the SCHOO-BE experience.

PubMed

Delaney-Black, V; Covington, C; Templin, T; Ager, J; Martier, S; Compton, S; Sokol, R

1998-06-21

Despite media reports and educators' concerns, little substantive data have been published to document or refute the emerging reports that children prenatally exposed to cocaine have serious behavioral problems in school. Recent pilot data from this institution have indeed demonstrated teacher-reported problem behaviors following prenatal cocaine exposure after controlling for the effects of prenatal alcohol use and cigarette exposure. Imperative in the study of prenatal exposure and child outcome is an acknowledgement of the influence of other control factors such as postnatal environment, secondary exposures, and parenting issues. We report preliminary evaluation from a large ongoing historical prospective study of prenatal cocaine exposure on school-age outcomes. The primary aim of this NIDA-funded study is to determine if a relationship exists between prenatal cocaine/alcohol exposures and school behavior and, if so, to determine if the relationship is characterized by a dose-response relationship. A secondary aim evaluates the relationship between prenatal cocaine/alcohol exposures and school achievement. Both relationships will be assessed in a black, urban sample of first grade students using multivariate statistical techniques for confounding as well as mediating and moderating prenatal and postnatal variables. A third aim is to evaluate the relationship between a general standardized classroom behavioral measure and a tool designed to tap the effects thought to be specific to prenatal cocaine exposure. This interdisciplinary research team can address these aims because of the existence of a unique, prospectively collected perinatal Database, funded in part by NIAAA and NICHD. The database includes repeated measures of cocaine, alcohol, and other substances for over 3,500 births since 1986. Information from this database is combined with information from the database of one of the largest public school systems in the nation. The final sample will be composed of over 600 first grade students for whom the independent variables, prenatal cocaine/alcohol exposures, were prospectively assessed and quantified at the university maternity center. After informed consent, the primary dependent variable, school behavior, is assessed, using the PROBS-14 (a teacher consensus developed instrument), the Child Behavior Check List, and the Conners' Teacher Rating Scale. The secondary dependent measure, school achievement, is measured by the Metropolitan Achievement Text and the Test of Early Reading Ability. Control variables, such as the environment and parenting, are measured by several instruments aimed at capturing the child and family ecology since birth. All analyses will be adjusted as appropriate for prospectively gathered control variables such as perinatal risk, neonatal risk, and other prenatal drug and cigarette exposures. Further adjustment will be made for postnatal social risk factors which may influence outcome. Of particular concern are characteristics of the home (adaptation of HOME), parent (depression, stress), and neighborhood (violence exposure). Finally, postnatal exposure to lead and other drugs is being considered.

Recent developments in radiation field control technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wood, C.J.

1995-03-01

The U.S. nuclear power industry has been remarkably successful in reducing worker radiation exposures over the past ten years. There has been over a fourfold reduction in the person-rem incurred for each MW.year of electric power generated: from 1.8 in 1980, to only 0.39 person-rems in 1991 and 1992. Preliminary data for 1993 are even lower: approximately 0.37 person-rem.MW.year. Despite this substantial improvement, challenges for the industry remain. Individual exposure limits have been tightened in ICRP 60 and there will be increased requirements for special maintenance work as plants age, suggesting that vigorous efforts with be increased requirements for specialmore » maintenance work as plants age, suggesting that vigorous efforts will be required to meet the industry goals for 1995. Reducing out-of-core radiation fields offer the best chance of continuing the downward trend in exposures. To assist utilities select the most economic technology for their specific plants, EPRI has published a manual capturing worldwide operating experience with radiation-field control techniques (TR-100265). No one method will suffice, but implementing suitable combinations from this collection will enable utilities to achieve their exposure goals. Radiation reduction is generally cost-effective: outages are shorter, manpower requirements are reduced and work quality is improved. Despite the up front costs, the benefits over the following 1-3 years typically outweigh the expenses.« less

No Association between Mycotoxin Exposure and Autism: A Pilot Case-Control Study in School-Aged Children

PubMed Central

Duringer, Jennifer; Fombonne, Eric; Craig, Morrie

2016-01-01

Evaluation of environmental risk factors in the development of autism spectrum disorder (ASD) is needed for a more complete understanding of disease etiology and best approaches for prevention, diagnosis, and treatment. A pilot experiment in 54 children (n = 25 ASD, n = 29 controls; aged 12.4 ± 3.9 years) screened for 87 urinary mycotoxins via liquid chromatography-tandem mass spectrometry to assess current exposure. Zearalenone, zearalenone-4-glucoside, 3-acetyldeoxynivalenol, and altenuene were detected in 9/54 (20%) samples, most near the limit of detection. No mycotoxin/group of mycotoxins was associated with ASD-diagnosed children. To identify potential correlates of mycotoxin presence in urine, we further compared the nine subjects where a urinary mycotoxin was confirmed to the remaining 45 participants and found no difference based on the presence or absence of mycotoxin for age (t-test; p = 0.322), gender (Fisher’s exact test; p = 0.456), exposure or not to selective serotonin reuptake inhibitors (Fisher’s exact test; p = 0.367), or to other medications (Fisher’s exact test; p = 1.00). While no positive association was found, more sophisticated sample preparation techniques and instrumentation, coupled with selectivity for a smaller group of mycotoxins, could improve sensitivity and detection. Further, broadening sampling to in utero (mothers) and newborn-toddler years would cover additional exposure windows. PMID:27447670

Natural orifice transendoluminal surgery and laparoendoscopic single-site surgery: the future of laparoscopic radical prostatectomy.

PubMed

Barret, Eric; Sanchez-Salas, Rafael; Ercolani, Matthew C; Rozet, Francois; Galiano, Marc; Cathelineau, Xavier

2011-03-01

Techniques for minimally invasive radical prostatectomy (RP) have been carefully reviewed by surgical teams worldwide in order to identify possible weaknesses and facilitate further improvement in their overall performance. The initial plan of action has been to carefully study the best-practice techniques for open RP in order to reproduce and standardize performance from the laparoscopic perspective. Similar to open surgery, the learning curve of minimally invasive RP has been well documented in terms of objective evaluation of outcomes for cancer control and functional results. Natural orifice transluminal endoscopic surgery (NOTES) and laparoendoscopic single-site surgery (LESS) have recently gained momentum as feasible techniques for minimal access urological surgery. NOTES-LESS drastically limit the surgeon's ability to choose the site of entry for operative instruments; therefore, the advantages of NOTES-LESS are gained with the understanding that the surgical procedure is more technically challenging. There are several key elements in RP techniques (in particular, dorsal vein control, apex exposure and cavernosal nerve sparing) that can have significant implications on oncologic and functional results. These steps are hard to perform in a limited working field. LESS radical prostatectomy can clearly be facilitated by using robotic technology.

Negative control exposure studies in the presence of measurement error: implications for attempted effect estimate calibration

PubMed Central

Sanderson, Eleanor; Macdonald-Wallis, Corrie; Davey Smith, George

2018-01-01

Abstract Background Negative control exposure studies are increasingly being used in epidemiological studies to strengthen causal inference regarding an exposure-outcome association when unobserved confounding is thought to be present. Negative control exposure studies contrast the magnitude of association of the negative control, which has no causal effect on the outcome but is associated with the unmeasured confounders in the same way as the exposure, with the magnitude of the association of the exposure with the outcome. A markedly larger effect of the exposure on the outcome than the negative control on the outcome strengthens inference that the exposure has a causal effect on the outcome. Methods We investigate the effect of measurement error in the exposure and negative control variables on the results obtained from a negative control exposure study. We do this in models with continuous and binary exposure and negative control variables using analysis of the bias of the estimated coefficients and Monte Carlo simulations. Results Our results show that measurement error in either the exposure or negative control variables can bias the estimated results from the negative control exposure study. Conclusions Measurement error is common in the variables used in epidemiological studies; these results show that negative control exposure studies cannot be used to precisely determine the size of the effect of the exposure variable, or adequately adjust for unobserved confounding; however, they can be used as part of a body of evidence to aid inference as to whether a causal effect of the exposure on the outcome is present. PMID:29088358

Negative control exposure studies in the presence of measurement error: implications for attempted effect estimate calibration.

PubMed

Sanderson, Eleanor; Macdonald-Wallis, Corrie; Davey Smith, George

2018-04-01

Negative control exposure studies are increasingly being used in epidemiological studies to strengthen causal inference regarding an exposure-outcome association when unobserved confounding is thought to be present. Negative control exposure studies contrast the magnitude of association of the negative control, which has no causal effect on the outcome but is associated with the unmeasured confounders in the same way as the exposure, with the magnitude of the association of the exposure with the outcome. A markedly larger effect of the exposure on the outcome than the negative control on the outcome strengthens inference that the exposure has a causal effect on the outcome. We investigate the effect of measurement error in the exposure and negative control variables on the results obtained from a negative control exposure study. We do this in models with continuous and binary exposure and negative control variables using analysis of the bias of the estimated coefficients and Monte Carlo simulations. Our results show that measurement error in either the exposure or negative control variables can bias the estimated results from the negative control exposure study. Measurement error is common in the variables used in epidemiological studies; these results show that negative control exposure studies cannot be used to precisely determine the size of the effect of the exposure variable, or adequately adjust for unobserved confounding; however, they can be used as part of a body of evidence to aid inference as to whether a causal effect of the exposure on the outcome is present.

Health effects of welding.

PubMed

Antonini, James M

2003-01-01

Many of the epidemiology studies performed are difficult to compare because of differences in worker populations, industrial settings, welding techniques, duration of exposure, and other occupational exposures besides welding fumes. Some studies were conducted in carefully controlled work environments, others during actual workplace conditions, and some in laboratories. Epidemiology studies have shown that a large number of welders experience some type of respiratory illness. Respiratory effects seen in full-time welders have included bronchitis, airway irritation, lung function changes, and a possible increase in the incidence of lung cancer. Pulmonary infections are increased in terms of severity, duration, and frequency among welders. Although epidemiological studies have demonstrated an increase in pulmonary illness after exposure to welding fumes, little information of the causality, dose-response, and possible underlying mechanisms regarding the inhalation of welding fumes exists. Even less information is available about the neurological, reproductive, and dermal effects after welding fume exposure. Moreover, carcinogenicity and short-term and long-term toxicology studies of welding fumes in animals are lacing or incomplete. Therefore, an understanding of possible adverse health effects of exposure to welding fumes is essential to risk assessment and the development of prevention strategies and will impact a large population of workers.

CARL: a LabVIEW 3 computer program for conducting exposure therapy for the treatment of dental injection fear.

PubMed

Coldwell, S E; Getz, T; Milgrom, P; Prall, C W; Spadafora, A; Ramsay, D S

1998-04-01

This paper describes CARL (Computer Assisted Relaxation Learning), a computerized, exposure-based therapy program for the treatment of dental injection fear. The CARL program operates primarily in two different modes; in vitro, which presents a video-taped exposure hierarchy, and in vivo, which presents scripts for a dentist or hygienist to use while working with a subject. Two additional modes are used to train subjects to use the program and to administer behavioral assessment tests. The program contains five different modules, which function to register a subject, train subjects to use physical and cognitive relaxation techniques, deliver an exposure hierarchy, question subjects about the helpfulness of each of the therapy components, and test for memory effects of anxiolytic medication. Nine subjects have completed the CARL therapy program and 1-yr follow-up as participants in a placebo-controlled clinical trial examining the effects of alprazolam on exposure therapy for dental injection phobia. All nine subjects were able to receive two dental injections, and all reduced their general fear of dental injections. Initial results therefore indicate that the CARL program successfully reduces dental injection fear.

Multiple exposure photographic (MEP) technique: an objective assessment of sperm motility in infertility management.

PubMed

Adetoro, O O

1988-06-01

Multiple exposure photography (MEP), an objective technique, was used in determining the percentage of motile sperms in the semen samples from 41 males being investigated for infertility. This technique was compared with the conventional subjective ordinary microscopy method of spermatozoal motility assessment. A satisfactory correlation was observed in percentage sperm motility assessment using the two methods but the MEP estimation was more consistent and reliable. The value of this technique of sperm motility study in the developing world is discussed.

Brief Group Intervention Using Emotional Freedom Techniques for Depression in College Students: A Randomized Controlled Trial

PubMed Central

Church, Dawson; De Asis, Midanelle A.; Brooks, Audrey J.

2012-01-01

Two hundred thirty-eight first-year college students were assessed using the Beck Depression Inventory (BDI). Thirty students meeting the BDI criteria for moderate to severe depression were randomly assigned to either a treatment or control group. The treatment group received four 90-minute group sessions of EFT (Emotional Freedom Techniques), a novel treatment that combines exposure, cognitive reprocessing, and somatic stimulation. The control group received no treatment. Posttests were conducted 3 weeks later on those that completed all requirements (N = 18). The EFT group (n = 9) had significantly more depression at baseline than the control group (n = 9) (EFT BDI mean = 23.44, SD = 2.1 versus control BDI mean = 20.33, SD = 2.1). After controlling for baseline BDI score, the EFT group had significantly less depression than the control group at posttest, with a mean score in the “nondepressed” range (P = .001; EFT BDI mean = 6.08, SE = 1.8 versus control BDI mean = 18.04, SE = 1.8). Cohen's d was 2.28, indicating a very strong effect size. These results are consistent with those noted in other studies of EFT that included an assessment for depression and indicate the clinical usefulness of EFT as a brief, cost-effective, and efficacious treatment. PMID:22848802

Brief group intervention using emotional freedom techniques for depression in college students: a randomized controlled trial.

PubMed

Church, Dawson; De Asis, Midanelle A; Brooks, Audrey J

2012-01-01

Two hundred thirty-eight first-year college students were assessed using the Beck Depression Inventory (BDI). Thirty students meeting the BDI criteria for moderate to severe depression were randomly assigned to either a treatment or control group. The treatment group received four 90-minute group sessions of EFT (Emotional Freedom Techniques), a novel treatment that combines exposure, cognitive reprocessing, and somatic stimulation. The control group received no treatment. Posttests were conducted 3 weeks later on those that completed all requirements (N = 18). The EFT group (n = 9) had significantly more depression at baseline than the control group (n = 9) (EFT BDI mean = 23.44, SD = 2.1 versus control BDI mean = 20.33, SD = 2.1). After controlling for baseline BDI score, the EFT group had significantly less depression than the control group at posttest, with a mean score in the "nondepressed" range (P = .001; EFT BDI mean = 6.08, SE = 1.8 versus control BDI mean = 18.04, SE = 1.8). Cohen's d was 2.28, indicating a very strong effect size. These results are consistent with those noted in other studies of EFT that included an assessment for depression and indicate the clinical usefulness of EFT as a brief, cost-effective, and efficacious treatment.

Long-life mission reliability for outer planet atmospheric entry probes

NASA Technical Reports Server (NTRS)

Mccall, M. T.; Rouch, L.; Maycock, J. N.

1976-01-01

The results of a literature analysis on the effects of prolonged exposure to deep space environment on the properties of outer planet atmospheric entry probe components are presented. Materials considered included elastomers and plastics, pyrotechnic devices, thermal control components, metal springs and electronic components. The rates of degradation of each component were determined and extrapolation techniques were used to predict the effects of exposure for up to eight years to deep space. Pyrotechnic devices were aged under accelerated conditions to an equivalent of eight years in space and functionally tested. Results of the literature analysis of the selected components and testing of the devices indicated that no severe degradation should be expected during an eight year space mission.

The immunotoxicological pattern of subchronic and chronic benzene exposure in rats.

PubMed

Karaulov, Alexander V; Mikhaylova, Irina V; Smolyagin, Alexander I; Boev, Viktor M; Kalogeraki, Alexandra; Tsatsakis, Aristides M; Engin, Ayse Basak

2017-06-05

Exposure to benzene and its inevitable metabolites can result in deleterious effects on human health, including lymphocytopenia, hematotoxicity and cancer. However, the duration of exposure might alter the effects including immune consequences. The aim of this study was to determine whether benzene could modulate lymphocyte proliferation induced by the T cell mitogen concanavalin A, in rats, at different exposure durations. 386 Wistar rats were assigned into control and treatment groups which were subdivided into groups for 45, 90 and 135days for 0,6mL/kg of drinking water mixed benzene treatment. The percentage of CD3+, CD4+, CD8+ spleen lymphocytes was defined using the flow cytometer. Interleukin (IL)-4, IL-6, IL-10 and interferon-gamma, in supernatants of splenocyte cultures stimulated with Concanavalin A, were assessed by enzyme-linked immunosorbent assay (ELISA) technique. The decrease in the total lymphocyte and T cell counts were associated with increased benzene exposure duration. Th2-type cytokine, IL-4 significantly increased, whereas IL-6, CD4+T cells, CD4+/CD8+ ratio and CD3+ T cells decreased. Despite the positive correlation between benzene toxicity and indicated increased immune responses, 45-day exposure to benzene appeared to be the most sensitive time point for evaluating benzene cytotoxicity. Copyright © 2017 Elsevier B.V. All rights reserved.

Thermally assisted nanosecond laser generation of ferric nanoparticles

NASA Astrophysics Data System (ADS)

Kurselis, K.; Kozheshkurt, V.; Kiyan, R.; Chichkov, B.; Sajti, L.

2018-03-01

A technique to increase nanosecond laser based production of ferric nanoparticles by elevating temperature of the iron target and controlling its surface exposure to oxygen is reported. High power near-infrared laser ablation of the iron target heated up to 600 °C enhances the particle generation efficiency by more than tenfold exceeding 6 μg/J. Temporal and thermal dependencies of the particle generation process indicate correlation of this enhancement with the oxidative processes that take place on the iron surface during the per spot interpulse delay. Nanoparticles, produced using the heat-assisted ablation technique, are examined using scanning electron and transmission electron microscopy confirming the presence of 1-100 nm nanoparticles with an exponential size distribution that contain multiple randomly oriented magnetite nanocrystallites. The described process enables the application of high power lasers and facilitates precise, uniform, and controllable direct deposition of ferric nanoparticle coatings at the industry-relevant rates.

Characterizing Exposures of Fish to Wastewater Treatment Plant Effluent: An Integrated Metabolite and Lipid Profiling Approach

EPA Science Inventory

Metabolite and lipid profiling are well established techniques for studying chemical-induced alterations to normal biological function in numerous organisms. These techniques have been used successfully to identify biomarkers of chemical exposure, screen for chemical potency, or ...

Neuroimaging is a novel tool to understand the impact of environmental chemicals on neurodevelopment.

PubMed

Horton, Megan K; Margolis, Amy E; Tang, Cheuk; Wright, Robert

2014-04-01

The prevalence of childhood neurodevelopmental disorders has been increasing over the last several decades. Prenatal and early childhood exposure to environmental toxicants is increasingly recognized as contributing to the growing rate of neurodevelopmental disorders. Very little information is known about the mechanistic processes by which environmental chemicals alter brain development. We review the recent advances in brain imaging modalities and discuss their application in epidemiologic studies of prenatal and early childhood exposure to environmental toxicants. Neuroimaging techniques (volumetric and functional MRI, diffusor tensor imaging, and magnetic resonance spectroscopy) have opened unprecedented access to study the developing human brain. These techniques are noninvasive and free of ionization radiation making them suitable for research applications in children. Using these techniques, we now understand much about structural and functional patterns in the typically developing brain. This knowledge allows us to investigate how prenatal exposure to environmental toxicants may alter the typical developmental trajectory. MRI is a powerful tool that allows in-vivo visualization of brain structure and function. Used in epidemiologic studies of environmental exposure, it offers the promise to causally link exposure with behavioral and cognitive manifestations and ultimately to inform programs to reduce exposure and mitigate adverse effects of exposure.

Towards the methodological optimization of the moss bag technique in terms of contaminants concentrations and replicability values

NASA Astrophysics Data System (ADS)

Ares, A.; Fernández, J. A.; Carballeira, A.; Aboal, J. R.

2014-09-01

The moss bag technique is a simple and economical environmental monitoring tool used to monitor air quality. However, routine use of the method is not possible because the protocols involved have not yet been standardized. Some of the most variable methodological aspects include (i) selection of moss species, (ii) ratio of moss weight to surface area of the bag, (iii) duration of exposure, and (iv) height of exposure. In the present study, the best option for each of these aspects was selected on the basis of the mean concentrations and data replicability of Cd, Cu, Hg, Pb and Zn measured during at least two exposure periods in environments affected by different degrees of contamination. The optimal choices for the studied aspects were the following: (i) Sphagnum denticulatum, (ii) 5.68 mg of moss tissue for each cm-2 of bag surface, (iii) 8 weeks of exposure, and (iv) 4 m height of exposure. Duration of exposure and height of exposure accounted for most of the variability in the data. The aim of this methodological study was to provide data to help establish a standardized protocol that will enable use of the moss bag technique by public authorities.

Evaluation of Ahmed glaucoma valve implantation through a needle-generated scleral tunnel in Mexican children with glaucoma

PubMed Central

Albis-Donado, Oscar; Gil-Carrasco, Félix; Romero-Quijada, Rafael; Thomas, Ravi

2010-01-01

Purpose: To evaluate the results and extrusion rates of the Ahmed glaucoma valve (AGV) implantation through a needle-generated scleral tunnel, without a tube-covering patch, in children. Materials and Methods: A retrospective review of the charts of 106 Mexican children implanted with 128 AGVs operated between 1994 and 2002, with the needle track technique, at our institution, with at least six months follow up was done. Main outcome measures were intraocular pressure (IOP) control, tube extrusions or exposure and other complications. Results: Kaplan-Meier analysis demonstrated a 96.9% survival rate at six months, 82.4% at one year, 78.7% at two years, 70% at three years and 41.6% at four years. Total success at the last follow-up (IOP between 6 and 21 mm Hg without medications) was achieved in 30 eyes (23.5%), 58 eyes (45.3%) had qualified success (only topical hypotensive drugs) and 40 eyes (31.3%) were failures. The mean pre- and post-operative IOP at the last follow up was 28.4 mmHg (SD 9.3) and 14.5 mmHg (SD 6.3), respectively. No tube extrusions or exposures were observed. Tube-related complications included five retractions, a lens touch and a transitory endothelial touch. The risk of failure increased if the eye had any complication or previous glaucoma surgeries. Conclusion: Medium-term IOP control in Mexican children with glaucoma can be achieved with AGV implantation using a needle-generated tunnel, without constructing a scleral flap or using a patch to cover the tube. There were no tube extrusions, nor any tube exposures with this technique. PMID:20689189

Characterization and control of EUV scanner dose uniformity and stability

NASA Astrophysics Data System (ADS)

Robinson, Chris; Corliss, Dan; Meli, Luciana; Johnson, Rick

2018-03-01

The EUV source is an impressive feat of engineering that provides 13.5 nm radiation by vaporizing tin droplets with a high power CO2 laser and focusing the photons produced in the resultant plasma into the scanner illumination system. Great strides have been made in addressing the many potential stability challenges, but there are still residual spatial and temporal dose non-uniformity signatures. Since even small dose errors can impact the yieldable process window for the advanced lithography products that are exposed on EUV scanners it is crucial to monitor and control the dose variability. Using on-board metrology, the EUV scanner outputs valuable metrics that provide real time insight into the dose performance. We have supplemented scanner data collection with a wafer based methodology that provides high throughput, high sensitivity, quantitative characterization of the EUV scanner dose delivery. The technique uses open frame EUV exposures, so it is exclusive of lithographic pattern imaging, exclusive of lithographic mask pattern and not limited by placement of metrology features. Processed wafers are inspected rapidly, providing 20,000 pixels of detail per exposure field in approximately one minute. Exposing the wafer on the scanner with a bit less than the resist E0 (open frame clearing dose) results in good sensitivity to small variations in the EUV dose delivered. The nominal exposure dose can be modulated by field to calibrate the inspection results and provide quantitative assessment of variations with < 1% sensitivity. This technique has been used for dose uniformity assessments. It is also being used for long term dose stability monitoring and has proven valuable for short term dose stability follow up investigations.

Use of automatic exposure control in multislice computed tomography of the coronaries: comparison of 16‐slice and 64‐slice scanner data with conventional coronary angiography

PubMed Central

Deetjen, Anja; Möllmann, Susanne; Conradi, Guido; Rolf, Andreas; Schmermund, Axel; Hamm, Christian W; Dill, Thorsten

2007-01-01

Objective To evaluate the radiation‐dose‐reduction potential of automatic exposure control (AEC) in 16‐slice and 64‐slice multislice computed tomography (MSCT) of the coronary arteries (computed tomography angiography, CTA) in patients. The rapid growth in MSCT CTA emphasises the necessity of adjusting technique factors to reduce radiation dose exposure. Design A retrospective data analysis was performed for 154 patients who had undergone MSCT CTA. Group 1 (n = 56) had undergone 16‐slice MSCT without AEC, and group 2 (n = 51), with AEC. In group 1, invasive coronary angiography (ICA) had been performed in addition. Group 3 (n = 47) had been examined using a 64‐slice scanner (with AEC, without ECG‐triggered tube current modulation). Results In group 1, the mean (SD) effective dose (ED) for MSCT CTA was 9.76 (1.84) mSv and for ICA it was 2.6 (1.27) mSv. In group 2, the mean ED for MSCT CTA was 5.83 (1.73) mSv, which signifies a 42.8% dose reduction for CTA by the use of AEC. In comparison to ICA, MSCT CTA without AEC shows a 3.8‐fold increase in radiation dose, and the radiation dose of CTA with AEC was increased by a factor of 1.9. In group 3, the mean ED for MSCT CTA was 13.58 (2.80) mSV. Conclusions This is the first study to show the significant dose‐reduction potential (42.8%) of AEC in MSCT CTA in patients. This relatively new technique can be used to optimise the radiation dose levels in MSCT CTA. PMID:17395667

Studies of the transmissibility of the agent of bovine spongiform encephalopathy to the domestic chicken

PubMed Central

2011-01-01

Background Transmission of the prion disease bovine spongiform encephalopathy (BSE) occurred accidentally to cattle and several other mammalian species via feed supplemented with meat and bone meal contaminated with infected bovine tissue. Prior to United Kingdom controls in 1996 on the feeding of mammalian meat and bone meal to farmed animals, the domestic chicken was potentially exposed to feed contaminated with the causal agent of BSE. Although confirmed prion diseases are unrecorded in avian species a study was undertaken to transmit BSE to the domestic chicken by parenteral and oral inoculations. Transmissibility was assessed by clinical monitoring, histopathological examinations, detection of a putative disease form of an avian prion protein (PrP) in recipient tissues and by mouse bioassay of tissues. Occurrence of a progressive neurological syndrome in the primary transmission study was investigated by sub-passage experiments. Results No clinical, pathological or bioassay evidence of transmission of BSE to the chicken was obtained in the primary or sub-passage experiments. Survival data showed no significant differences between control and treatment groups. Neurological signs observed, not previously described in the domestic chicken, were not associated with significant pathology. The diagnostic techniques applied failed to detect a disease associated form of PrP. Conclusion Important from a risk assessment perspective, the present study has established that the domestic chicken does not develop a prion disease after large parenteral exposures to the BSE agent or after oral exposures equivalent to previous exposures via commercial diets. Future investigations into the potential susceptibility of avian species to mammalian prion diseases require species-specific immunochemical techniques and more refined experimental models. PMID:22093239

The effect of low- and high-power microwave irradiation on in vitro grown Sequoia plants and their recovery after cryostorage.

PubMed

Halmagyi, A; Surducan, E; Surducan, V

2017-09-01

Two distinct microwave power levels and techniques have been studied in two cases: low-power microwave (LPM) irradiation on in vitro Sequoia plants and high-power microwave (HPM) exposure on recovery rates of cryostored (-196°C) Sequoia shoot apices. Experimental variants for LPM exposure included: (a) in vitro plants grown in regular conditions (at 24 ± 1°C during a 16-h light photoperiod with a light intensity of 39.06 μEm -2 s -1 photosynthetically active radiation), (b) in vitro plants grown in the anechoic chamber with controlled environment without microwave irradiation, and (c) in vitro plants grown in the anechoic chamber with LPM irradiation for various times (5, 15, 30, 40 days). In comparison to control plants, significant differences in shoot multiplication and growth parameters (length of shoots and roots) were observed after 40 days of LPM exposure. An opposite effect was achieved regarding the content of total soluble proteins, which decreased with increasing exposure time to LPM. HPM irradiation was tested as a novel rewarming method following storage in liquid nitrogen. To our knowledge, this is the first report using this type of rewarming method. Although, shoot tips subjected to HPM exposure showed 28% recovery following cryostorage compared to 44% for shoot tips rewarmed in liquid medium at 22 ± 1 °C, we consider that the method represent a basis and can be further improved. The results lead to the overall conclusion that LPM had a stimulating effect on growth and multiplication of in vitro Sequoia plants, while the HPM used for rewarming of cryopreserved apices was not effective to achieve high rates of regrowth after liquid nitrogen exposure.

NIOSH field studies team assessment: Worker exposure to aerosolized metal oxide nanoparticles in a semiconductor fabrication facility.

PubMed

Brenner, Sara A; Neu-Baker, Nicole M; Eastlake, Adrienne C; Beaucham, Catherine C; Geraci, Charles L

2016-11-01

The ubiquitous use of engineered nanomaterials-particulate materials measuring approximately 1-100 nanometers (nm) on their smallest axis, intentionally engineered to express novel properties-in semiconductor fabrication poses unique issues for protecting worker health and safety. Use of new substances or substances in a new form may present hazards that have yet to be characterized for their acute or chronic health effects. Uncharacterized or emerging occupational health hazards may exist when there is insufficient validated hazard data available to make a decision on potential hazard and risk to exposed workers under condition of use. To advance the knowledge of potential worker exposure to engineered nanomaterials, the National Institute for Occupational Safety and Health Nanotechnology Field Studies Team conducted an on-site field evaluation in collaboration with on-site researchers at a semiconductor research and development facility on April 18-21, 2011. The Nanomaterial Exposure Assessment Technique (2.0) was used to perform a complete exposure assessment. A combination of filter-based sampling and direct-reading instruments was used to identify, characterize, and quantify the potential for worker inhalation exposure to airborne alumina and amorphous silica nanoparticles associated with th e chemical mechanical planarization wafer polishing process. Engineering controls and work practices were evaluated to characterize tasks that might contribute to potential exposures and to assess existing engineering controls. Metal oxide structures were identified in all sampling areas, as individual nanoparticles and agglomerates ranging in size from 60 nm to >1,000 nm, with varying structure morphology, from long and narrow to compact. Filter-based samples indicated very little aerosolized material in task areas or worker breathing zone. Direct-reading instrument data indicated increased particle counts relative to background in the wastewater treatment area; however, particle counts were very low overall, indicating a well-controlled working environment. Recommendations for employees handling or potentially exposed to engineered nanomaterials include hazard communication, standard operating procedures, conservative ventilation systems, and prevention through design in locations where engineered nanomaterials are used or stored, and routine air sampling for occupational exposure assessment and analysis.

Reinforcing the role of the conventional C-arm - a novel method for simplified distal interlocking

PubMed Central

2012-01-01

Background The common practice for insertion of distal locking screws of intramedullary nails is a freehand technique under fluoroscopic control. The process is technically demanding, time-consuming and afflicted to considerable radiation exposure of the patient and the surgical personnel. A new concept is introduced utilizing information from within conventional radiographic images to help accurately guide the surgeon to place the interlocking bolt into the interlocking hole. The newly developed technique was compared to conventional freehand in an operating room (OR) like setting on human cadaveric lower legs in terms of operating time and radiation exposure. Methods The proposed concept (guided freehand), generally based on the freehand gold standard, additionally guides the surgeon by means of visible landmarks projected into the C-arm image. A computer program plans the correct drilling trajectory by processing the lens-shaped hole projections of the interlocking holes from a single image. Holes can be drilled by visually aligning the drill to the planned trajectory. Besides a conventional C-arm, no additional tracking or navigation equipment is required. Ten fresh frozen human below-knee specimens were instrumented with an Expert Tibial Nail (Synthes GmbH, Switzerland). The implants were distally locked by performing the newly proposed technique as well as the conventional freehand technique on each specimen. An orthopedic resident surgeon inserted four distal screws per procedure. Operating time, number of images and radiation time were recorded and statistically compared between interlocking techniques using non-parametric tests. Results A 58% reduction in number of taken images per screw was found for the guided freehand technique (7.4 ± 3.4) (mean ± SD) compared to the freehand technique (17.6 ± 10.3) (p < 0.001). Total radiation time (all 4 screws) was 55% lower for the guided freehand technique compared to conventional freehand (p = 0.001). Operating time per screw (from first shot to screw tightened) was on average 22% reduced by guided freehand (p = 0.018). Conclusions In an experimental setting, the newly developed guided freehand technique for distal interlocking has proven to markedly reduce radiation exposure when compared to the conventional freehand technique. The method utilizes established clinical workflows and does not require cost intensive add-on devices or extensive training. The underlying principle carries potential to assist implant positioning in numerous other applications within orthopedics and trauma from screw insertions to placement of plates, nails or prostheses. PMID:22276698

Optimizing focal plane electric field estimation for detecting exoplanets

NASA Astrophysics Data System (ADS)

Groff, T.; Kasdin, N. J.; Riggs, A. J. E.

Detecting extrasolar planets with angular separations and contrast levels similar to Earth requires a large space-based observatory and advanced starlight suppression techniques. This paper focuses on techniques employing an internal coronagraph, which is highly sensitive to optical errors and must rely on focal plane wavefront control techniques to achieve the necessary contrast levels. To maximize the available science time for a coronagraphic mission we demonstrate an estimation scheme using a discrete time Kalman filter. The state estimate feedback inherent to the filter allows us to minimize the number of exposures required to estimate the electric field. We also show progress including a bias estimate into the Kalman filter to eliminate incoherent light from the estimate. Since the exoplanets themselves are incoherent to the star, this has the added benefit of using the control history to gain certainty in the location of exoplanet candidates as the signal-to-noise between the planets and speckles improves. Having established a purely focal plane based wavefront estimation technique, we discuss a sensor fusion concept where alternate wavefront sensors feedforward a time update to the focal plane estimate to improve robustness to time varying speckle. The overall goal of this work is to reduce the time required for wavefront control on a target, thereby improving the observatory's planet detection performance by increasing the number of targets reachable during the lifespan of the mission.

N-halamine biocidal coatings via a layer-by-layer assembly technique.

PubMed

Cerkez, Idris; Kocer, Hasan B; Worley, S D; Broughton, R M; Huang, T S

2011-04-05

Two N-halamine copolymer precursors, poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-acrylic acid potassium salt) and poly(2,2,6,6-tetramethyl-4-piperidyl methacrylate-co-trimethyl-2-methacryloxyethylammonium chloride) have been synthesized and successfully coated onto cotton fabric via a layer-by-layer (LbL) assembly technique. A multilayer thin film was deposited onto the fiber surfaces by alternative exposure to polyelectrolyte solutions. The coating was rendered biocidal by a dilute household bleach treatment. The biocidal efficacies of tested swatches composed of treated fibers were evaluated against Staphylococcus aureus and Escherichia coli. It was determined that chlorinated samples inactivated both S. aureus and E. coli O157:H7 within 15 min of contact time, whereas the unchlorinated control samples did not exhibit significant biocidal activities. Stabilities of the coatings toward washing and ultraviolet light exposure have also been studied. It was found that the stability toward washing was superior, whereas the UVA light stability was moderate compared to previously studied N-halamine moieties. The layer-by-layer assembly technique can be used to attach N-halamine precursor polymers onto cellulose surfaces without using covalently bonding tethering groups which limit the structure designs. In addition, ionic precursors are very soluble in water, thus promising for biocidal coatings without the use of organic solvents.

An egg injection technique to evaluate the effect of polychlorinated biphenyls on the hatching success of the snapping turtle (Chelydra serpentina serpentina).

PubMed

Schnars, Jeanette L; Voss, Margaret A; Stauffer, Jay R

2011-04-01

Embryos of oviparous organisms are exposed to contaminants by two pathways: contaminant uptake from the surrounding environment, and the transfer from female to offspring (maternal transfer). The initial source of contaminant exposure for most embryos is likely to be maternal transfer; therefore, maternal transfer studies are critical in determining the effects of contaminants on future populations. Injection of contaminants directly into eggs is one route of experimental contaminant exposure that permits controlled doses and potential reliable replication. This technique, however, has been used in the past with little success in reptiles. The objective of the present study was to evaluate egg injection as a means of mimicking maternal transfer of polychlorinated biphenyls (PCBs) to snapping turtle eggs. Eggs from several clutches were injected with a PCB solution and incubated at several temperatures and moisture levels to measure interactive effects of injection, environmental condition, and contaminant load on hatching success. The injection technique allowed for application of consistent and specific doses among replicates. Overall hatching success in this study was 61% and was as high as 71% within specific treatments. Hatching success was much higher in this study than in other studies using egg injections to mimic maternal transfer in chelonians and crocodilians. Copyright © 2010 SETAC.

Exposure assessment of a cyclist to PM10 and ultrafine particles.

PubMed

Berghmans, P; Bleux, N; Int Panis, L; Mishra, V K; Torfs, R; Van Poppel, M

2009-02-01

Estimating personal exposure to air pollution is a crucial component in identifying high-risk populations and situations. It will enable policy makers to determine efficient control strategies. Cycling is again becoming a favorite mode of transport both in developing and in developed countries due to increasing traffic congestion and environmental concerns. In Europe, it is also seen as a healthy sports activity. However, due to high levels of hazardous pollutants in the present day road microenvironment the cyclist might be at a higher health risk due to higher breathing rate and proximity to the vehicular exhaust. In this paper we present estimates of the exposure of a cyclist to particles of various size fractions including ultrafine particles (UFP) in the town of Mol (Flanders, Belgium). The results indicate relatively higher UFP concentration exposure during morning office hours and moderate UFP levels during afternoon. The major sources of UFP and PM(10) were identified, which are vehicular emission and construction activities, respectively. We also present a dust mapping technique which can be a useful tool for town planners and local policy makers.

Precise fabrication of a 5 nm graphene nanopore with a helium ion microscope for biomolecule detection

NASA Astrophysics Data System (ADS)

Deng, Yunsheng; Huang, Qimeng; Zhao, Yue; Zhou, Daming; Ying, Cuifeng; Wang, Deqiang

2017-01-01

We report a scalable method to fabricate high-quality graphene nanopores for biomolecule detection using a helium ion microscope (HIM). HIM milling shows promising capabilities for precisely controlling the size and shape, and may allow for the potential production of nanopores at wafer scale. Nanopores could be fabricated at different sizes ranging from 5 to 30 nm in diameter in few minutes. Compared with the current solid-state nanopore fabrication techniques, e.g. transmission electron microscopy, HIM is fast. Furthermore, we investigated the exposure-time dependence of graphene nanopore formation: the rate of pore expansion did not follow a simple linear relationship with exposure time, but a fast expansion rate at short exposure time and a slow rate at long exposure time. In addition, we performed biomolecule detection with our patterned graphene nanopore. The ionic current signals induced by 20-base single-stranded DNA homopolymers could be used as a basis for homopolymer differentiation. However, the charge interaction of homopolymer chains with graphene nanopores, and the conformations of homopolymer chains need to be further considered to improve the accuracy of discrimination.

Cellular damage suffered by equine embryos after exposure to cryoprotectants or cryopreservation by slow-freezing or vitrification.

PubMed

Hendriks, W K; Roelen, B A J; Colenbrander, B; Stout, T A E

2015-11-01

Equine embryos are cryopreserved by slow-freezing or vitrification. While small embryos (<300 μm) survive cryopreservation reasonably well, larger embryos do not. It is not clear if slow-freezing or vitrification is less damaging to horse embryos. To compare the type and extent of cellular damage suffered by small and large embryos during cryopreservation by slow-freezing vs. vitrification. Sixty-three Day 6.5-7 embryos were subdivided by size and assigned to one of 5 treatments: control, exposure to slow-freezing or vitrification cryoprotectants (CPs), and cryopreservation by either technique. After thawing/CP removal, embryos were stained with fluorescent stains for various parameters of cellular integrity, and assessed by multiphoton microscopy. Exposing large embryos to vitrification CPs resulted in more dead cells (6.8 ± 1.3%: 95% confidence interval [CI], 3.1-10.4%) than exposure to slow-freezing media (0.3 ± 0.1%; 95% CI 0.0-0.6%: P = 0.001). Cryopreservation by either technique induced cell death and cytoskeleton disruption. Vitrification of small embryos resulted in a higher proportion of cells with fragmented or condensed (apoptotic) nuclei (P = 0.002) than slow-freezing (6.7 ± 1.5%, 95% CI 3.0-10.4% vs. 5.0 ± 2.1%, 95% CI 4.0-14.0%). Slow-freezing resulted in a higher incidence of disintegrated embryos (P = 0.01) than vitrification. Mitochondrial activity was low in control embryos, and was not differentially affected by cryopreservation technique, whereas vitrification changed mitochondrial distribution from a homogenous crystalline pattern in control embryos to a heterogeneous granulated distribution in vitrified embryos (P = 0.05). Cryopreservation caused more cellular damage to large embryos than smaller ones. While vitrification is more practical, it is not advisable for large embryos due to a higher incidence of dead cells. The choice is less obvious for small embryos, as vitrification led to occasionally very high percentages of dead or damaged cells, but a lower incidence of embryo disintegration. Modifications that reduce the level of cellular damage induced by vitrification are required before it can be considered the method of choice for cryopreserving equine embryos. © 2014 EVJ Ltd.

Improved functionality of graphene and carbon nanotube hybrid foam architecture by UV-ozone treatment

NASA Astrophysics Data System (ADS)

Wang, Wei; Ruiz, Isaac; Lee, Ilkeun; Zaera, Francisco; Ozkan, Mihrimah; Ozkan, Cengiz S.

2015-04-01

Optimization of the electrode/electrolyte double-layer interface is a key factor for improving electrode performance of aqueous electrolyte based supercapacitors (SCs). Here, we report the improved functionality of carbon materials via a non-invasive, high-throughput, and inexpensive UV generated ozone (UV-ozone) treatment. This process allows precise tuning of the graphene and carbon nanotube hybrid foam (GM) transitionally from ultrahydrophobic to hydrophilic within 60 s. The continuous tuning of surface energy can be controlled by simply varying the UV-ozone exposure time, while the ozone-oxidized carbon nanostructure maintains its integrity. Symmetric SCs based on the UV-ozone treated GM foam demonstrated enhanced rate performance. This technique can be readily applied to other CVD-grown carbonaceous materials by taking advantage of its ease of processing, low cost, scalability, and controllability.Optimization of the electrode/electrolyte double-layer interface is a key factor for improving electrode performance of aqueous electrolyte based supercapacitors (SCs). Here, we report the improved functionality of carbon materials via a non-invasive, high-throughput, and inexpensive UV generated ozone (UV-ozone) treatment. This process allows precise tuning of the graphene and carbon nanotube hybrid foam (GM) transitionally from ultrahydrophobic to hydrophilic within 60 s. The continuous tuning of surface energy can be controlled by simply varying the UV-ozone exposure time, while the ozone-oxidized carbon nanostructure maintains its integrity. Symmetric SCs based on the UV-ozone treated GM foam demonstrated enhanced rate performance. This technique can be readily applied to other CVD-grown carbonaceous materials by taking advantage of its ease of processing, low cost, scalability, and controllability. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr06795a

Application of Foam-gel Technique to Control CO Exposure Generated During Spontaneous Combustion of Coal in Coal Mines.

PubMed

Ren, Xing W; Wang, Feng Z; Guo, Qing; Zuo, Zhao B; Fang, Qi S

2015-01-01

In China, 47.3% of state-owned coal mines are located in coal seams that are prone to spontaneous combustion. The spontaneous combustion of coal is the main cause of the generation of a large amount of carbon monoxide, which can cause serious health issues to miners. A new technique using foam-gel formation was developed to effectively control the spontaneous combustion of coal. The gel can capture more than 90% of the water in the grout and at the same time the foam can cover dangerous areas in the goaf by stacking and cooling of foam in all directions. In this study, a mechanism of foam-gel formation was introduced and the optimal proportions of additives were defined based on experiments of different foaming properties, gelling time and water loss rate as the main index parameters. The results of a field application in a coal mine promise that this new technique would effectively prevent coal oxidation in the goaf and reduce the generation of carbon monoxide.

High dynamic range adaptive real-time smart camera: an overview of the HDR-ARTiST project

NASA Astrophysics Data System (ADS)

Lapray, Pierre-Jean; Heyrman, Barthélémy; Ginhac, Dominique

2015-04-01

Standard cameras capture only a fraction of the information that is visible to the human visual system. This is specifically true for natural scenes including areas of low and high illumination due to transitions between sunlit and shaded areas. When capturing such a scene, many cameras are unable to store the full Dynamic Range (DR) resulting in low quality video where details are concealed in shadows or washed out by sunlight. The imaging technique that can overcome this problem is called HDR (High Dynamic Range) imaging. This paper describes a complete smart camera built around a standard off-the-shelf LDR (Low Dynamic Range) sensor and a Virtex-6 FPGA board. This smart camera called HDR-ARtiSt (High Dynamic Range Adaptive Real-time Smart camera) is able to produce a real-time HDR live video color stream by recording and combining multiple acquisitions of the same scene while varying the exposure time. This technique appears as one of the most appropriate and cheapest solution to enhance the dynamic range of real-life environments. HDR-ARtiSt embeds real-time multiple captures, HDR processing, data display and transfer of a HDR color video for a full sensor resolution (1280 1024 pixels) at 60 frames per second. The main contributions of this work are: (1) Multiple Exposure Control (MEC) dedicated to the smart image capture with alternating three exposure times that are dynamically evaluated from frame to frame, (2) Multi-streaming Memory Management Unit (MMMU) dedicated to the memory read/write operations of the three parallel video streams, corresponding to the different exposure times, (3) HRD creating by combining the video streams using a specific hardware version of the Devebecs technique, and (4) Global Tone Mapping (GTM) of the HDR scene for display on a standard LCD monitor.

Non-invasive, quantitative, and remote detection of early radiation cataracts for applications in bio-astronautics and bio-informatics

NASA Astrophysics Data System (ADS)

Ansari, Rafat R.; Giblin, Frank J.; King, James F.

2001-02-01

Human exploration of Mars may be a possibility in the next twenty years. Maintaining good vision is an essential aspect of achieving a successful mission. Continuous radiation exposure is a risk factor for radiation-induced cataracts in astronauts. A compact device based on the technique of dynamic light scattering (DLS) is designed for monitoring an astronaut's ocular health during long-duration space travel. Preliminary data on the simulated effects of ionizing radiation exposure to the ocular tissues of non-human animals and results on the sensitivity of DLS over established clinical procedures in investigating cataracts are presented. This capability of early diagnosis, unmatched by any other clinical technique in use today, may enable prompt initiation of preventive/curative therapy. An inter-net web based system integrating photon correlation data and controlling the hardware to monitor cataract development in vivo at a remote site in real time (tele-ophthalmology) is currently being developed. Cataract studies on-board the International Space Station (ISS) will be helpful in designing better protective radiation shields for future space vehicles and space suits. .

Hydroxyapatite and bioactive glass surfaces for fiber reinforced composite implants via surface ablation by Excimer laser.

PubMed

Kulkova, Julia; Moritz, Niko; Huhtinen, Hannu; Mattila, Riina; Donati, Ivan; Marsich, Eleonora; Paoletti, Sergio; Vallittu, Pekka K

2017-11-01

In skeletal reconstructions, composites, such as bisphenol-A-glycidyldimethacrylate resin reinforced with glass fibers, are potentially useful alternatives to metallic implants. Recently, we reported a novel method to prepare bioactive surfaces for these composites. Surface etching by Excimer laser was used to expose bioactive glass granules embedded in the resin. The purpose of this study was to analyze two types of bioactive surfaces created by this technique. The surfaces contained bioactive glass and hydroxyapatite granules. The selected processing parameters were adequate for the creation of the surfaces. However, the use of porous hydroxyapatite prevented the complete exposure the granules. In cell culture, for bioactive glass coatings, the pattern of proliferation of MG63 cells was comparable to that in the positive control group (Ti6Al4V) while inferior cell proliferation was observed on the surfaces containing hydroxyapatite granules. Scanning electron microscopy revealed osteointegration of implants with both types of surfaces. The technique is suitable for the exposure of solid bioactive glass granules. However, the long-term performance of the surfaces needs further assessment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Non-Invasive, Quantitative, and Remote Detection of Early Radiation Cataracts for Applications in Bio-Astronautics and Bio-Informatics

NASA Technical Reports Server (NTRS)

Ansari, Rafat R.; Giblin, Frank J.; King, James F.; Singh, B. (Technical Monitor)

2002-01-01

Human exploration of Mars may be a possibility in the next twenty years. Maintaining good vision is an essential aspect of achieving a successful mission. Continuous radiation exposure is a risk factor for radiation-induced cataracts in astronauts. A compact device based on the technique of dynamic light scattering (DLS) is designed for monitoring an astronaut's ocular health during long-duration space travel. Preliminary data on the simulated effects of ionizing radiation exposure to the ocular tissues of nonhuman animals and results on the sensitivity of DLS over established clinical procedures in investigating cataracts are presented. This capability of early diagnosis, unmatched by any other clinical technique in use today, may enable prompt initiation of preventive/curative therapy. An internet web based system integrating photon correlation data and controlling the hardware to monitor cataract development in vivo at a remote site in real time (teleophthalmology) is currently being developed. Cataract studies on-board the International Space Station (ISS) will be helpful in designing better protective radiation shields for future space vehicles and space suits.

A method for the in vivo measurement of americium-241 at long times post-exposure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neton, J.W.

1988-01-01

This study investigated an improved method for the quantitative measurement, calibration and calculation of {sup 241}Am organ burdens in humans. The techniques developed correct for cross-talk or count-rate contributions from surrounding and adjacent organ burdens and assures for the proper assignment of activity to the lungs, liver and skeleton. In order to predict the net count-rates for the measurement geometries of the skull, liver and lung, a background prediction method was developed. This method utilizes data obtained from the measurement of a group of control subjects. Based on this data, a linear prediction equation was developed for each measurement geometry.more » In order to correct for the cross-contributions among the various deposition loci, a series of surrogate human phantom structures were measured. The results of measurements of {sup 241}Am depositions in six exposure cases have been evaluated using these new techniques and have indicated that lung burden estimates could be in error by as much as 100 percent when corrections are not made for contributions to the count-rate from other organs.« less

Analytical and environmental aspects of the flame retardant tetrabromobisphenol-A and its derivatives.

PubMed

Covaci, Adrian; Voorspoels, Stefan; Abdallah, Mohamed Abou-Elwafa; Geens, Tinne; Harrad, Stuart; Law, Robin J

2009-01-16

The present article reviews the available literature on the analytical and environmental aspects of tetrabromobisphenol-A (TBBP-A), a currently intensively used brominated flame retardant (BFR). Analytical methods, including sample preparation, chromatographic separation, detection techniques, and quality control are discussed. An important recent development in the analysis of TBBP-A is the growing tendency for liquid chromatographic techniques. At the detection stage, mass-spectrometry is a well-established and reliable technology in the identification and quantification of TBBP-A. Although interlaboratory exercises for BFRs have grown in popularity in the last 10 years, only a few participating laboratories report concentrations for TBBP-A. Environmental levels of TBBP-A in abiotic and biotic matrices are low, probably due to the major use of TBBP-A as reactive FR. As a consequence, the expected human exposure is low. This is in agreement with the EU risk assessment that concluded that there is no risk for humans concerning TBBP-A exposure. Much less analytical and environmental information exists for the various groups of TBBP-A derivatives which are largely used as additive flame retardants.

What's better than the pill, vasectomy, celibacy and rhythm?

PubMed

Rorvik, D M

1975-01-01

A report of a new technique of male contraception involves the use of heat which lowers the sperm count. Early reports of lowered sperm counts in men wearing jockstraps or increased sperm counts in men whose testicles have been cooled several degrees have led to the experimentation in the male rat of the effects of heat and ultrasound on the sperm count and the ability to fertilize the female. 250 male rats were divided into 5 groups: 1) control, 2) a 60 degree C water circulating testicle cup with 15 minutes exposure, 3) exposure to radiant energy for 15 minutes and raising scrotal temperatures to 60 degrees C, 4) exposure to microwaves of varying powers, and 5) exposure to ultrasound of 1 w/cm to 2 w/cm for 1 minute. Group 2 results indicated that libido was uninhibited, testosterone levels undisturbed a nd organ sizes unaffected by the hot-water treatment. It took 30-35 days for any pregnancies to occur after a single treatment. In group 3, results were substantially the same except that it took 60-75 days for any pregnancies to occur. In group 4, a 20% exposure to radiation for 5 minutes impaired fertility for 65-80 days, while those exposed to 20% for 15 minutes were still infertile at the end of the 10-month study. In these cases libido was also unimpaired. Animals in group 5, exposed to 1 w/cm for 1 minute had impaired fertility for 150-210 days although testicular temperature rose to only 38 degrees C. When exposure to ultr asound was doubled, fertility was impaired throughout the study. In all cases where fertility was restored, resulting offspring appeared normal and were themselves capable of reproducing normal-appearing offspring. Ultrasound was considered the most promising heat source. In all cases the germinal epithelium function is arrested. Future research should be directed to making the ultrasound technique more finely tuned to a contraceptive function.

Highlighting media modifications: can a television commercial mitigate the effects of music videos on female appearance satisfaction?

PubMed

Quigg, Stephanie L; Want, Stephen C

2011-03-01

Exposure to idealized media portrayals of women induces appearance dissatisfaction in females, in the short term. Interventions that highlight the artificial nature of media portrayals can mitigate this effect. The present research investigated whether a 75 second television commercial, that demonstrates behind-the-scenes techniques used to artificially enhance media models, could be similarly effective. Eighty-seven Caucasian female undergraduates were randomly assigned to one of three conditions. The first group viewed music videos and ordinary television commercials. A second group viewed the same music videos and the "intervention" commercial. A final, control, group viewed television and commercials featuring no people. Viewing music videos resulted in significantly lower levels of self-reported appearance satisfaction compared to viewing control television, p<.05, d=-.67. However, exposure to the intervention commercial counter-acted this effect. Demonstrating the extent to which media portrayals of women are artificially enhanced can mitigate detrimental effects on female appearance satisfaction. Copyright © 2010 Elsevier Ltd. All rights reserved.

Use of anticoagulant rodenticides in outdoor urban areas: considerations and proposals for the protection of public health and non-target species.

PubMed

Dutto, M; Di Domenico, D; Rubbiani, M

2018-01-01

Rodent control operations represent an important tool for the prevention and management of infestations, in outdoor environments, by synanthropic rodents (Rattus rattus and R. norvegicus), which are a source of economic and environmental damage with significant sanitary implications. Although the use of anticoagulants is safer to humans and pets compared to the use of acute poisoning substances, an intrinsic hazard of the active ingredients exists, i.e. the possible poisoning of non-target organisms (e.g., children, pets and wildlife) following exposure. The risks arising from the use of anticoagulants for rodent control operations in anthropic contexts can therefore only be mitigated by a proper selection of the active ingredient, bait formulation and administration techniques, since an active ingredient with selective action towards non-target species does not currently exist on the market. This document lists practical proposals aimed at reducing the possibility of toxic exposure to anticoagulant rodenticides and mitigate the toxicological risk of human baits and non-target species.

Line-edge quality optimization of electron beam resist for high-throughput character projection exposure utilizing atomic force microscope analysis

NASA Astrophysics Data System (ADS)

Ikeno, Rimon; Mita, Yoshio; Asada, Kunihiro

2017-04-01

High-throughput electron-beam lithography (EBL) by character projection (CP) and variable-shaped beam (VSB) methods is a promising technique for low-to-medium volume device fabrication with regularly arranged layouts, such as standard-cell logics and memory arrays. However, non-VLSI applications like MEMS and MOEMS may not fully utilize the benefits of CP method due to their wide variety of layout figures including curved and oblique edges. In addition, the stepwise shapes that appear on such irregular edges by VSB exposure often result in intolerable edge roughness, which may degrade performances of the fabricated devices. In our former study, we proposed a general EBL methodology for such applications utilizing a combination of CP and VSB methods, and demonstrated its capabilities in electron beam (EB) shot reduction and edge-quality improvement by using a leading-edge EB exposure tool, ADVANTEST F7000S-VD02, and high-resolution Hydrogen Silsesquioxane resist. Both scanning electron microscope and atomic force microscope observations were used to analyze quality of the resist edge profiles to determine the influence of the control parameters used in the exposure-data preparation process. In this study, we carried out detailed analysis of the captured edge profiles utilizing Fourier analysis, and successfully distinguish the systematic undulation by the exposed CP character profiles from random roughness components. Such capability of precise edge-roughness analysis is useful to our EBL methodology to maintain both the line-edge quality and the exposure throughput by optimizing the control parameters in the layout data conversion.

Diffusion measures indicate fight exposure-related damage to cerebral white matter in boxers and mixed martial arts fighters.

PubMed

Shin, W; Mahmoud, S Y; Sakaie, K; Banks, S J; Lowe, M J; Phillips, M; Modic, M T; Bernick, C

2014-02-01

Traumatic brain injury is common in fighting athletes such as boxers, given the frequency of blows to the head. Because DTI is sensitive to microstructural changes in white matter, this technique is often used to investigate white matter integrity in patients with traumatic brain injury. We hypothesized that previous fight exposure would predict DTI abnormalities in fighting athletes after controlling for individual variation. A total of 74 boxers and 81 mixed martial arts fighters were included in the analysis and scanned by use of DTI. Individual information and data on fight exposures, including number of fights and knockouts, were collected. A multiple hierarchical linear regression model was used in region-of-interest analysis to test the hypothesis that fight-related exposure could predict DTI values separately in boxers and mixed martial arts fighters. Age, weight, and years of education were controlled to ensure that these factors would not account for the hypothesized effects. We found that the number of knockouts among boxers predicted increased longitudinal diffusivity and transversal diffusivity in white matter and subcortical gray matter regions, including corpus callosum, isthmus cingulate, pericalcarine, precuneus, and amygdala, leading to increased mean diffusivity and decreased fractional anisotropy in the corresponding regions. The mixed martial arts fighters had increased transversal diffusivity in the posterior cingulate. The number of fights did not predict any DTI measures in either group. These findings suggest that the history of fight exposure in a fighter population can be used to predict microstructural brain damage.

USAFSAM (USAF School of Aerospace Medicine) Review and Analysis of Radiofrequency Radiation Bioeffects Literature: Fourth Report.

DTIC Science & Technology

1984-05-01

TEST CHART ?NATIONAL BUREAU OF STANDARDS-1963-A AD)A142 961 Repor USAFSAM-TR-84-17 USAFSAM REVIEW AND ANALYSIS OF RADIOFREQUENCY RADIATION BIOEFFECTS...1983a) AUTHOR ABSTRACT: Normal mouse B lymphocytes were tested for the ability to cap plasma antigen-antibody complexes following exposure to 2.45-GHz...treatment, the irradiated cells and the nonirradiated controls were tested for capping by the direct immunofluorescence technique. First, the cells

Surface Acoustic Waves Grant Superior Spatial Control of Cells Embedded in Hydrogel Fibers.

PubMed

Lata, James P; Guo, Feng; Guo, Jinshan; Huang, Po-Hsun; Yang, Jian; Huang, Tony Jun

2016-10-01

By exploiting surface acoustic waves and a coupling layer technique, cells are patterned within a photosensitive hydrogel fiber to mimic physiological cell arrangement in tissues. The aligned cell-polymer matrix is polymerized with short exposure to UV light and the fiber is extracted. These patterned cell fibers are manipulated into simple and complex architectures, demonstrating feasibility for tissue-engineering applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Monitoring asthma in childhood: management-related issues.

PubMed

Rottier, Bart L; Eber, Ernst; Hedlin, Gunilla; Turner, Steve; Wooler, Edwina; Mantzourani, Eva; Kulkarni, Neeta

2015-06-01

Management-related issues are an important aspect of monitoring asthma in children in clinical practice. This review summarises the literature on practical aspects of monitoring including adherence to treatment, inhalation technique, ongoing exposure to allergens and irritants, comorbid conditions and side-effects of treatment, as agreed by the European Respiratory Society Task Force on Monitoring Asthma in Childhood. The evidence indicates that it is important to discuss adherence to treatment in a non-confrontational way at every clinic visit, and take into account a patient's illness and medication beliefs. All task force members teach inhalation techniques at least twice when introducing a new inhalation device and then at least annually. Exposure to second-hand tobacco smoke, combustion-derived air pollutants, house dust mites, fungal spores, pollens and pet dander deserve regular attention during follow-up according to most task force members. In addition, allergic rhinitis should be considered as a cause for poor asthma control. Task force members do not screen for gastro-oesophageal reflux and food allergy. Height and weight are generally measured at least annually to identify individuals who are susceptible to adrenal suppression and to calculate body mass index, even though causality between obesity and asthma has not been established. In cases of poor asthma control, before stepping up treatment the above aspects of monitoring deserve closer attention. Copyright ©ERS 2015.

Laparoscopic anatomy of the autonomic nerves of the pelvis and the concept of nerve-sparing surgery by direct visualization of autonomic nerve bundles.

PubMed

Lemos, Nucelio; Souza, Caroline; Marques, Renato Moretti; Kamergorodsky, Gil; Schor, Eduardo; Girão, Manoel J B C

2015-11-01

To demonstrate the laparoscopic neuroanatomy of the autonomic nerves of the pelvis using the laparoscopic neuronavigation technique, as well as the technique for a nerve-sparing radical endometriosis surgery. Step-by-step explanation of the technique using videos and pictures (educational video) to demonstrate the anatomy of the intrapelvic bundles of the autonomic nerve system innervating the bladder, rectum, and pelvic floor. Tertiary referral center. One 37-year-old woman with an infiltrative endometriotic nodule on the anterior third of the left uterosacral ligament and one 34-year-old woman with rectovaginal endometriosis. Exposure and preservation by direct visualization of the hypogastric nerve and the inferior hypogastric plexus. Visual control and identification of the autonomic nerve branches of the posterior pelvis. Exposure and preservation of the hypogastric nerve and the superficial part of the left hypogastric nerve were achieved on the first patient. Nerve roots S2, S3, and S4 were identified on the second patient, allowing for the exposure and preservation of the pelvic splanchnic nerves and the deep portion inferior hypogastric plexus. Radical surgery for endometriosis can induce urinary dysfunction in 2.4%-17.5% of patients owing to lesion of the autonomic nerves. The surgeon's knowledge of the anatomy of these nerves is the main factor for preserving postoperative urinary function. The following nerves are the intrapelvic part of the autonomic nervous system: the hypogastric nerves, which derive from the superior hypogastric plexus and carry the sympathetic signals to the internal urethral and anal sphincters as well as to the pelvic visceral proprioception; and the pelvic splanchnic nerves, which arise from S2 to S4 and carry nociceptive and parasympathetic signals to the bladder, rectum, and the sigmoid and left colons. The hypogastric and pelvic splanchnic nerves merge into the pararectal fossae to form the inferior hypogastric plexus. Most of the nerve-sparing techniques involve the dissection and exposure of the pelvic splanchnic nerves and the inferior hypogastric plexus. However, knowledge of the topographic anatomy and awareness of the landmarks for avoiding intraoperative nerve injuries seem to be the most important factors in avoiding postoperative bladder and bowel dysfunction, although this latter nerve-sparing technique seems to be associated with reduced radicality and symptom persistence. This video demonstrates a technique to expose the sympathetic and parasympathetic nerves of the pelvis to preserve them in radical pelvic surgery, by means of direct visualization, in a similar fashion to the technique used to preserve the ureters. An alternative to this technique is to use landmarks for limiting dissection and avoiding intraoperative nerve injury. Despite being safe and more easily reproducible, this latter technique is associated with a higher rate of symptom persistence. Copyright © 2015 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Low-Temperature Ozone Exposure Technique to Modulate the Stoichiometry of WO(x) Nanorods and Optimize the Electrochromic Performance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, F.; Li, C. P.; Chen, G.

A low-temperature ozone exposure technique was employed for the post-treatment of WO{sub x} nanorod thin films fabricated from hot-wire chemical vapor deposition (HWCVD) and ultrasonic spray deposition (USD) techniques. The resulting films were characterized with x-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, UV-vis-NIR spectroscopy and x-ray photoelectron spectroscopy (XPS). The stoichiometry and surface crystallinity of the WO{sub x} thin films were subsequently modulated upon ozone exposure and thermal annealing without particle growth. The electrochromic performance was studied in a LiClO{sub 4}-propylene carbonate electrolyte, and the results suggest that the low-temperature ozone exposure technique is superior to the traditionalmore » high-temperature thermal annealing (employed to more fully oxidize the WO{sub x}). The optical modulation at 670 nm was improved from 35% for the as-deposited film to 57% for the film after ozone exposure at 150 C. The coloration efficiency was improved and the switching speed to the darkened state was significantly accelerated from 18.0 s for the as-deposited film to 11.8 s for the film after the ozone exposure. The process opens an avenue for low-temperature and cost-effective manufacturing of electrochromic films, especially on flexible polymer substrates.« less

Assay techniques for detection of exposure to sulfur mustard, cholinesterase inhibitors, sarin, soman, GF, and cyanide. Technical bulletin

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-05-01

This technical bulletin provides analytical techniques to identify toxic chemical agents in urine or blood samples. It is intended to provide the clinician with laboratory tests to detect exposure to sulfur mustard, cholinesterase inhibitors, sarin, soman, GF, and cyanide.

Optimization of dual-energy subtraction chest radiography by use of a direct-conversion flat-panel detector system.

PubMed

Fukao, Mari; Kawamoto, Kiyosumi; Matsuzawa, Hiroaki; Honda, Osamu; Iwaki, Takeshi; Doi, Tsukasa

2015-01-01

We aimed to optimize the exposure conditions in the acquisition of soft-tissue images using dual-energy subtraction chest radiography with a direct-conversion flat-panel detector system. Two separate chest images were acquired at high- and low-energy exposures with standard or thick chest phantoms. The high-energy exposure was fixed at 120 kVp with the use of an auto-exposure control technique. For the low-energy exposure, the tube voltages and entrance surface doses ranged 40-80 kVp and 20-100 % of the dose required for high-energy exposure, respectively. Further, a repetitive processing algorithm was used for reduction of the image noise generated by the subtraction process. Seven radiology technicians ranked soft-tissue images, and these results were analyzed using the normalized-rank method. Images acquired at 60 kVp were of acceptable quality regardless of the entrance surface dose and phantom size. Using a repetitive processing algorithm, the minimum acceptable doses were reduced from 75 to 40 % for the standard phantom and to 50 % for the thick phantom. We determined that the optimum low-energy exposure was 60 kVp at 50 % of the dose required for the high-energy exposure. This allowed the simultaneous acquisition of standard radiographs and soft-tissue images at 1.5 times the dose required for a standard radiograph, which is significantly lower than the values reported previously.

Exposure control strategies in the carbonaceous nanomaterial industry.

PubMed

Dahm, Matthew M; Yencken, Marianne S; Schubauer-Berigan, Mary K

2011-06-01

Little is known about exposure control strategies currently being implemented to minimize exposures during the production or use of nanomaterials in the United States. Our goal was to estimate types and quantities of materials used and factors related to workplace exposure reductions among companies manufacturing or using engineered carbonaceous nanomaterials (ECNs). Information was collected through phone surveys on work practices and exposure control strategies from 30 participating producers and users of ECN. The participants were classified into three groups for further examination. We report here the use of exposure control strategies. Observed patterns suggest that large-scale manufacturers report greater use of nanospecific exposure control strategies particularly for respiratory protection. Workplaces producing or using ECN generally report using engineering and administrative controls as well as personal protective equipment to control workplace employee exposure.

Photocrosslinked Tyramine-Substituted Hyaluronate Hydrogels with Tunable Mechanical Properties Improve Immediate Tissue‐Hydrogel Interfacial Strength in Articular Cartilage

PubMed Central

Donnelly, Patrick E.; Chen, Tony; Finch, Anthony; Brial, Caroline; Maher, Suzanne A.; Torzilli, Peter A.

2017-01-01

Articular cartilage lacks the ability to self-repair and a permanent solution for cartilage repair remains elusive. Hydrogel implantation is a promising technique for cartilage repair; however for the technique to be successful hydrogels must interface with the surrounding tissue. The objective of this study was to investigate the tunability of mechanical properties in a hydrogel system using a phenol-substituted polymer, tyramine-substituted hyaluronate (TA-HA), and to determine if the hydrogels could form an interface with cartilage. We hypothesized that tyramine moieties on hyaluronate could crosslink to aromatic amino acids in the cartilage extracellular matrix. Ultraviolet (UV) light and a riboflavin photosensitizer were used to create a hydrogel by tyramine self‐crosslinking. The gel mechanical properties were tuned by varying riboflavin concentration, TA-HA concentration, and UV exposure time. Hydrogels formed with a minimum of 2.5 min of UV exposure. The compressive modulus varied from 5–16 kPa. Fluorescence spectroscopy analysis found differences in dityramine content. Cyanine-3 labelled tyramide reactivity at the surface of cartilage was dependent on the presence of riboflavin and UV exposure time. Hydrogels fabricated within articular cartilage defects had increasing peak interfacial shear stress at the cartilage-hydrogel interface with increasing UV exposure time, reaching a maximum shear stress 3.5× greater than a press‐fit control. Our results found that phenol-substituted polymer/riboflavin systems can be used to fabricate hydrogels with tunable mechanical properties and can interface with the surface tissue, such as articular cartilage. PMID:28134036

Comparison of the safety and efficacy of one-shot and telescopic metal dilatation in percutaneous nephrolithotomy: a randomized controlled trial.

PubMed

Amirhassani, Shahriar; Mousavi-Bahar, Seyed Habibollah; Iloon Kashkouli, Abdolmajid; Torabian, Saadat

2014-06-01

Minimizing X-ray exposure during percutaneous nephrolithotomy (PCNL) is challenging. Using the single semirigid dilator, also called "one-shot" or "one-stage" is a good alternative to routine telescopic metal dilators to reduce X-ray exposure. Our aim was to compare the single semirigid one-shot dilator with a telescopic metal dilator in PCNL. The intraoperative status was evaluated in 100 consecutive patients randomly assigned to two equal groups undergoing PCNL either with the one-shot (group A) or telescopic technique (group B). No significant difference in stone burden and location existed between the groups (P > 0.05). The mean age of group A and group B was 44.8 ± 15 and 45.6 ± 14 years, respectively (P = 0.78). The mean operation time was 51.14 ± 40.85 min in group A and 57.00 ± 38.85 min in group B (P = 0.46). The mean X-ray exposure time was 41.2 ± 17 and 48.4 ± 15 s in group A and group B, respectively (P = 0.03). The stone-free rate was 94 % (n = 47) in group A and 84 % (n = 42) in group B (P = 0.10). The mean hemoglobin drop was 1.26 ± 0.09 and 1.44 ± 0.11 g/dl in group A and group B, respectively (P = 0.09). The one-shot technique is feasible, safe, and well tolerated in patients undergoing PCNL. In addition to lack of complications, the method also provides less radiation exposure for urologists and nursing teams.

Impact of geocoding methods on associations between long-term exposure to urban air pollution and lung function.

PubMed

Jacquemin, Bénédicte; Lepeule, Johanna; Boudier, Anne; Arnould, Caroline; Benmerad, Meriem; Chappaz, Claire; Ferran, Joane; Kauffmann, Francine; Morelli, Xavier; Pin, Isabelle; Pison, Christophe; Rios, Isabelle; Temam, Sofia; Künzli, Nino; Slama, Rémy; Siroux, Valérie

2013-09-01

Errors in address geocodes may affect estimates of the effects of air pollution on health. We investigated the impact of four geocoding techniques on the association between urban air pollution estimated with a fine-scale (10 m × 10 m) dispersion model and lung function in adults. We measured forced expiratory volume in 1 sec (FEV1) and forced vital capacity (FVC) in 354 adult residents of Grenoble, France, who were participants in two well-characterized studies, the Epidemiological Study on the Genetics and Environment on Asthma (EGEA) and the European Community Respiratory Health Survey (ECRHS). Home addresses were geocoded using individual building matching as the reference approach and three spatial interpolation approaches. We used a dispersion model to estimate mean PM10 and nitrogen dioxide concentrations at each participant's address during the 12 months preceding their lung function measurements. Associations between exposures and lung function parameters were adjusted for individual confounders and same-day exposure to air pollutants. The geocoding techniques were compared with regard to geographical distances between coordinates, exposure estimates, and associations between the estimated exposures and health effects. Median distances between coordinates estimated using the building matching and the three interpolation techniques were 26.4, 27.9, and 35.6 m. Compared with exposure estimates based on building matching, PM10 concentrations based on the three interpolation techniques tended to be overestimated. When building matching was used to estimate exposures, a one-interquartile range increase in PM10 (3.0 μg/m3) was associated with a 3.72-point decrease in FVC% predicted (95% CI: -0.56, -6.88) and a 3.86-point decrease in FEV1% predicted (95% CI: -0.14, -3.24). The magnitude of associations decreased when other geocoding approaches were used [e.g., for FVC% predicted -2.81 (95% CI: -0.26, -5.35) using NavTEQ, or 2.08 (95% CI -4.63, 0.47, p = 0.11) using Google Maps]. Our findings suggest that the choice of geocoding technique may influence estimated health effects when air pollution exposures are estimated using a fine-scale exposure model.

Risk Assessment Strategies and Techniques for Combined Exposures

EPA Science Inventory

Author: Cynthia V. Rider, Ph.D., and Jane Ellen Simmons, Ph.D.Abstract: Consideration of cumulative risk is necessary to evaluate properly the safety of, and the risks associated with, combined exposures. These combined exposures ("mixtures") commonly occur from exposure to: envi...

Doppler ultrasound surveillance in deep tunneling compressed-air work with Trimix breathing: bounce dive technique compared to saturation-excursion technique.

PubMed

Vellinga, T P van Rees; Sterk, W; de Boer, A G E M; van der Beek, A J; Verhoeven, A C; van Dijk, F J H

2008-01-01

The Western Scheldt Tunneling Project in The Netherlands provided a unique opportunity to evaluate two deep-diving techniques with Doppler ultrasound surveillance. Divers used the bounce diving techniques for repair and maintenance of the TBM. The tunnel boring machine jammed at its deepest depth. As a result the work time was not sufficient. The saturation diving technique was developed and permitted longer work time at great depth. Thirty-one divers were involved in this project. Twenty-three divers were examined using Doppler ultrasound. Data analysis addressed 52 exposures to Trimix at 4.6-4.8 bar gauge using the bounce technique and 354 exposures to Trimix at 4.0-6.9 bar gauge on saturation excursions. No decompression incidents occurred with either technique during the described phase of the project. Doppler ultrasound revealed that the bubble loads assessed in both techniques were generally low. We find out, that despite longer working hours, shorter decompression times and larger physical workloads, the saturation-excursion technique was associated with significant lower bubble grades than in the bounce technique using Doppler Ultrasound. We conclude that the saturation-excursion technique with Trimix is a good option for deep and long exposures in caisson work. The Doppler technique proved valuable, and it should be incorporated in future compressed-air work.

Solvent-free optical recording of structural colours on pre-imprinted photocrosslinkable nanostructures

NASA Astrophysics Data System (ADS)

Jiang, Hao; Rezaei, Mohamad; Abdolahi, Mahssa; Kaminska, Bozena

2017-09-01

Optical digital information storage media, despite their ever-increasing storage capacity and data transfer rate, are vulnerable to the potential risk of turning inaccessible. For this reason, long-term eye-readable full-colour optical archival storage is in high demand for preserving valuable information from cultural, intellectual, and scholarly resources. However, the concurrent requirements in recording colours inexpensively and precisely, and preserving colours for the very long term (for at least 100 years), have not yet been met by existing storage techniques. Structural colours hold the promise to overcome such challenges. However, there is still the lack of an inexpensive, rapid, reliable, and solvent-free optical patterning technique for recording structural colours. In this paper, we introduce an enabling technique based on optical and thermal patterning of nanoimprinted SU-8 nanocone arrays. Using photocrosslinking and thermoplastic flow of SU-8, diffractive structural colours of nanocone arrays are recorded using ultra-violet (UV) exposure followed by the thermal development and reshaping of nanocones. Different thermal treatment procedures in reshaping nanocones are investigated and compared, and two-step progressive baking is found to allow the controllable reshaping of nanocones. The height of the nanocones and brightness of diffractive colours are modulated by varying the UV exposure dose to enable grey-scale patterning. An example of recorded full-colour image through half-tone patterning is also demonstrated. The presented technique requires only low-power continuous-wave UV light and is very promising to be adopted for professional and consumer archival storage applications.

Legal requirements and guidelines for the control of harmful laser generated particles, vapours and gases

NASA Astrophysics Data System (ADS)

Horsey, John

2015-07-01

This paper is a review of the Health and Safety laws and guidelines relating to laser generated emissions into the workplace and outside environment with emphasis on the differences between legal requirements and guideline advice. The types and nature of contaminants released by various laser processes (i.e. cutting, coding, engraving, marking etc) are discussed, together with the best methods for controlling them to within legal exposure limits. A brief description of the main extract air filtration techniques, including the principles of particulate removal and the action of activated carbon for gas/vapour/odour filtration, is given.

Neuroimaging is a novel tool to understand the impact of environmental chemicals on neurodevelopment

PubMed Central

Horton, Megan K.; Margolis, Amy E.; Tang, Cheuk; Wright, Robert

2014-01-01

Purpose of review The prevalence of childhood neurodevelopmental disorders (ND) has been increasing over the last several decades. Prenatal and early childhood exposure to environmental toxicants is increasingly recognized as contributing to the growing rate of NDs. Very little is known about the mechanistic processes by which environmental chemicals alter brain development. We review recent advances in brain imaging modalities and discuss their application in epidemiologic studies of prenatal and early childhood exposure to environmental toxicants. Recent findings Neuroimaging techniques (volumetric and functional magnetic resonance imaging (MRI), diffusor tensor imaging (DTI), magnetic resonance spectroscopy (MRS)) have opened unprecedented access to study the developing human brain. These techniques are non-invasive and free of ionization radiation making them suitable for research applications in children. Using these techniques, we now understand much about structural and functional patterns in the typically developing brain. This knowledge allows us to investigate how prenatal exposure to environmental toxicants may alter the typical developmental trajectory. Summary MRI is a powerful tool that allows in vivo visualization of brain structure and function. Used in epidemiologic studies of environmental exposure, it offers the promise to causally link exposure with behavioral and cognitive manifestations and ultimately to inform programs to reduce exposure and mitigate adverse effects of exposure. PMID:24535497

Time reducing exposure containing 18 fluorine flourodeoxyglucose master vial dispensing in hot lab: Omega technique

PubMed Central

Rao, Vatturi Venkata Satya Prabhakar; Manthri, Ranadheer; Hemalatha, Pottumuthu; Kumar, Vuyyuru Navin; Azhar, Mohammad

2016-01-01

Hot lab dispensing of large doses of 18 fluorine fluorodeoxyglucose in master vials supplied from the cyclotrons requires high degrees of skill to handle high doses. Presently practiced conventional method of fractionating from the inverted tiltable vial pig mounted on a metal frame has its own limitations such as increasing isotope handling times and exposure to the technologist. Innovative technique devised markedly improves the fractionating efficiency along with speed, precision, and reduced dose exposure. PMID:27095872

Image information content and patient exposure.

PubMed

Motz, J W; Danos, M

1978-01-01

Presently, patient exposure and x-ray tube kilovoltage are determined by image visibility requirements on x-ray film. With the employment of image-processing techniques, image visibility may be manipulated and the exposure may be determined only by the desired information content, i.e., by the required degree of tissue-density descrimination and spatial resolution. This work gives quantitative relationships between the image information content and the patient exposure, give estimates of the minimum exposures required for the detection of image signals associated with particular radiological exams. Also, for subject thickness larger than approximately 5 cm, the results show that the maximum information content may be obtained at a single kilovoltage and filtration with the simultaneous employment of image-enhancement and antiscatter techniques. This optimization may be used either to reduce the patient exposure or to increase the retrieved information.

X-ray intravital microscopy for functional imaging in rat hearts using synchrotron radiation coronary microangiography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Umetani, K.; Fukushima, K.

2013-03-15

An X-ray intravital microscopy technique was developed to enable in vivo visualization of the coronary, cerebral, and pulmonary arteries in rats without exposure of organs and with spatial resolution in the micrometer range and temporal resolution in the millisecond range. We have refined the system continually in terms of the spatial resolution and exposure time. X-rays transmitted through an object are detected by an X-ray direct-conversion type detector, which incorporates an X-ray SATICON pickup tube. The spatial resolution has been improved to 6 {mu}m, yielding sharp images of small arteries. The exposure time has been shortened to around 2 msmore » using a new rotating-disk X-ray shutter, enabling imaging of beating rat hearts. Quantitative evaluations of the X-ray intravital microscopy technique were extracted from measurements of the smallest-detectable vessel size and detection of the vessel function. The smallest-diameter vessel viewed for measurements is determined primarily by the concentration of iodinated contrast material. The iodine concentration depends on the injection technique. We used ex vivo rat hearts under Langendorff perfusion for accurate evaluation. After the contrast agent is injected into the origin of the aorta in an isolated perfused rat heart, the contrast agent is delivered directly into the coronary arteries with minimum dilution. The vascular internal diameter response of coronary arterial circulation is analyzed to evaluate the vessel function. Small blood vessels of more than about 50 {mu}m diameters were visualized clearly at heart rates of around 300 beats/min. Vasodilation compared to the control was observed quantitatively using drug manipulation. Furthermore, the apparent increase in the number of small vessels with diameters of less than about 50 {mu}m was observed after the vasoactive agents increased the diameters of invisible small blood vessels to visible sizes. This technique is expected to offer the potential for direct investigation of mechanisms of vascular dysfunctions.« less

An experiment on the dynamics of ion implantation and sputtering of surfaces

NASA Astrophysics Data System (ADS)

Wright, G. M.; Barnard, H. A.; Kesler, L. A.; Peterson, E. E.; Stahle, P. W.; Sullivan, R. M.; Whyte, D. G.; Woller, K. B.

2014-02-01

A major impediment towards a better understanding of the complex plasma-surface interaction is the limited diagnostic access to the material surface while it is undergoing plasma exposure. The Dynamics of ION Implantation and Sputtering Of Surfaces (DIONISOS) experiment overcomes this limitation by uniquely combining powerful, non-perturbing ion beam analysis techniques with a steady-state helicon plasma exposure chamber, allowing for real-time, depth-resolved in situ measurements of material compositions during plasma exposure. Design solutions are described that provide compatibility between the ion beam analysis requirements in the presence of a high-intensity helicon plasma. The three primary ion beam analysis techniques, Rutherford backscattering spectroscopy, elastic recoil detection, and nuclear reaction analysis, are successfully implemented on targets during plasma exposure in DIONISOS. These techniques measure parameters of interest for plasma-material interactions such as erosion/deposition rates of materials and the concentration of plasma fuel species in the material surface.

Space Shuttle and Space Station Radio Frequency (RF) Exposure Analysis

NASA Technical Reports Server (NTRS)

Hwu, Shian U.; Loh, Yin-Chung; Sham, Catherine C.; Kroll, Quin D.

2005-01-01

This paper outlines the modeling techniques and important parameters to define a rigorous but practical procedure that can verify the compliance of RF exposure to the NASA standards for astronauts and electronic equipment. The electromagnetic modeling techniques are applied to analyze RF exposure in Space Shuttle and Space Station environments with reasonable computing time and resources. The modeling techniques are capable of taking into account the field interactions with Space Shuttle and Space Station structures. The obtained results illustrate the multipath effects due to the presence of the space vehicle structures. It's necessary to include the field interactions with the space vehicle in the analysis for an accurate assessment of the RF exposure. Based on the obtained results, the RF keep out zones are identified for appropriate operational scenarios, flight rules and necessary RF transmitter constraints to ensure a safe operating environment and mission success.

An experiment on the dynamics of ion implantation and sputtering of surfaces.

PubMed

Wright, G M; Barnard, H A; Kesler, L A; Peterson, E E; Stahle, P W; Sullivan, R M; Whyte, D G; Woller, K B

2014-02-01

A major impediment towards a better understanding of the complex plasma-surface interaction is the limited diagnostic access to the material surface while it is undergoing plasma exposure. The Dynamics of ION Implantation and Sputtering Of Surfaces (DIONISOS) experiment overcomes this limitation by uniquely combining powerful, non-perturbing ion beam analysis techniques with a steady-state helicon plasma exposure chamber, allowing for real-time, depth-resolved in situ measurements of material compositions during plasma exposure. Design solutions are described that provide compatibility between the ion beam analysis requirements in the presence of a high-intensity helicon plasma. The three primary ion beam analysis techniques, Rutherford backscattering spectroscopy, elastic recoil detection, and nuclear reaction analysis, are successfully implemented on targets during plasma exposure in DIONISOS. These techniques measure parameters of interest for plasma-material interactions such as erosion/deposition rates of materials and the concentration of plasma fuel species in the material surface.

Automatic exposure control at single- and dual-heartbeat CTCA on a 320-MDCT volume scanner: effect of heart rate, exposure phase window setting, and reconstruction algorithm.

PubMed

Funama, Yoshinori; Utsunomiya, Daisuke; Taguchi, Katsuyuki; Oda, Seitaro; Shimonobo, Toshiaki; Yamashita, Yasuyuki

2014-05-01

To investigate whether electrocardiogram (ECG)-gated single- and dual-heartbeat computed tomography coronary angiography (CTCA) with automatic exposure control (AEC) yields images with uniform image noise at reduced radiation doses. Using an anthropomorphic chest CT phantom we performed prospectively ECG-gated single- and dual-heartbeat CTCA on a second-generation 320-multidetector CT volume scanner. The exposure phase window was set at 75%, 70-80%, 40-80%, and 0-100% and the heart rate at 60 or 80 or corr80 bpm; images were reconstructed with filtered back projection (FBP) or iterative reconstruction (IR, adaptive iterative dose reduction 3D). We applied AEC and set the image noise level to 20 or 25 HU. For each technique we determined the image noise and the radiation dose to the phantom center. With half-scan reconstruction at 60 bpm, a 70-80% phase window- and a 20-HU standard deviation (SD) setting, the imagenoise level and -variation along the z axis manifested similar curves with FBP and IR. With half-scan reconstruction, the radiation dose to the phantom center with 70-80% phase window was 18.89 and 12.34 mGy for FBP and 4.61 and 3.10 mGy for IR at an SD setting SD of 20 and 25 HU, respectively. At 80 bpm with two-segment reconstruction the dose was approximately twice that of 60 bpm at both SD settings. However, increasing radiation dose at corr80 bpm was suppressed to 1.39 times compared to 60 bpm. AEC at ECG-gated single- and dual-heartbeat CTCA controls the image noise at different radiation dose. Copyright © 2013 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

Efficient in vitro photodynamic inactivation of Candida albicans by repetitive light doses

NASA Astrophysics Data System (ADS)

Torres-Hurtado, S. A.; Ramírez Ramírez, J.; Ramos-García, R.; Ramírez-San-Juan, J. C.; Spezzia-Mazzocco, T.

2018-02-01

The aim of this study was to compare the effectiveness of Rose Bengal (RB) and Methylene Blue (MB) as photosensitizers (PS) in Photodynamic Inactivation (PDI) on planktonic cultures of Candida albicans, a well-known opportunistic pathogen. RB and MB at concentrations ranging from 0.5 to 60 μM and fluences of 10, 30, 45 and 60 J/cm2 were tested. The light sources consist of an array of 12 led diodes with 30 mW of optical power each; 490-540 nm (green light) to activate RB and 600 -650 nm (red light) to activate MB. We first optimize the in vitro PDI technique using a single light dose and the optimum PS concentration. The novelty of our approach consist in reducing further the PS concentration than the optimum obtained with a single light exposure and using smaller light fluence doses by using repetitive light exposures (two to three times). MB and RB were tested for repetitive exposures at concentrations ranging from 0.1 to 10 μM, with fluences of 3 to 20 J/cm2, doses well below than those reported previously. All experiments were done in triplicate with the corresponding controls; cells without treatment, light control and dark toxicity control. RB-PDI and MB-PDI significantly reduced the number of CFU/mL when compared to the control groups. The results showed that RB was more effective than MB for C. albicans inactivation. Thus, we show that is possible to reduce significantly the amount of PS and light fluence requirements using repetitive light doses of PDI in vitro.

Parenting Control in Contexts of Political Violence: Testing Bi-directional Relations between Violence Exposure and Control in Post-Accord Belfast

PubMed Central

Merrilees, Christine E.; Cummings, E. Mark; Goeke-Morey, Marcie C.; Schermerhorn, Alice C.; Shirlow, Peter; Cairns, Ed

2012-01-01

SYNOPSIS Objective The goal of the present study is to examine bi-directional relations between youth exposure to sectarian and nonsectarian antisocial behavior and mothers’ efforts to control youth’s exposure to community violence in Belfast, Northern Ireland. Design Mother-child dyads (N=773) were interviewed in their homes twice over 2 years regarding youth’s exposure to sectarian (SAB) and nonsectarian (NAB) community antisocial behavior and mothers’ use of control strategies, including behavioral and psychological control. Results Youth’s exposure to NAB was related to increases in mothers’ use of both behavioral and psychological control strategies over time, controlling for earlier levels of these constructs. Reflecting bi-directional relations, mothers’ behavioral control strategies were associated with youth’s reduced exposure to both NAB and SAB over time, whereas psychological control was not related to reduced exposure. Conclusion Only nonsectarian community violence was associated longitudinally with mothers’ increased use of control strategies, and only behavioral control strategies were effective in reducing youth’s exposure to community antisocial behavior, including both sectarian and nonsectarian antisocial behavior. PMID:22523479

Salivary cortisol day curves in Addison's disease in patients on hydrocortisone replacement.

PubMed

Ross, I L; Levitt, N S; Van der Walt, J S; Schatz, D A; Johannsson, G; Haarburger, D H; Pillay, T S

2013-01-01

Using salivary cortisol (SC) measurements, cortisol exposure in Addison's disease patients on hydrocortisone replacement was determined and compared with healthy controls. Cortisol pharmacokinetics was assessed in 31 patients with Addison's disease on replacement hydrocortisone doses (median daily dose 20 mg; range 5-50 mg) and 30 healthy control subjects. Saliva samples (n=16) were collected between 08:00 and 00:00 h in 1 day, using a passive drool technique. Cortisol exposure was evaluated by noncompartmental approach. In the patients, cortisol exposure was significantly higher than in controls: median inter-quartile range (IQR) peak cortisol (C(max)) 174.5 (59.3-837.0) vs. 6.50 (4.7-19.3) nmol/l, p=0.0001; area under the curve (AUC) 390.1 (177.1-928.9) vs. 21.4 (14.6-28.4) minutes*nmol/l, p=0.0001, trough cortisol level (C(min)) 0.49 (0.49-0.96) vs. 0.49 (0.49-0.49) nmol/l, p=0.02, occurring at 480.0 (0.1-660.0) vs. 405.0 (180.0-570.0) min, p=0.56. First peak cortisol was 174.5 (53.0-754.7) vs. 6.27 (3.90-8.47) nmol/l, p=0.0001 and second peak cortisol 18.90 (5.22-76.9) vs. 3.12 (1.76-4.79) nmol/l, p=0.0001. The time to first peak cortisol differed between the 2 groups, 30 (30-75) vs. 0.1 (0.1-30) minutes; p=0.0001. At doses studied, hydrocortisone replacement therapy results in cortisol pharmacokinetics being markedly different from endogenous cortisol profiles in healthy control subjects. Addison's disease patients had significantly higher SC levels compared to healthy control subjects. © Georg Thieme Verlag KG Stuttgart · New York.

Environmental arsenic exposure and risk of diabetes type 2 in Ron Phibun subdistrict, Nakhon Si Thammarat Province, Thailand: unmatched and matched case–control studies

PubMed Central

Sripaoraya, Kwanyuen; Siriwong, Wattasit; Pavittranon, Sumol; Chapman, Robert S

2017-01-01

Background There are inconsistent findings on associations between low-to-moderate level of arsenic in water and diabetes risk from previous epidemiological reports. In Ron Phibun subdistrict, Nakhon Si Thammarat Province, Thailand, a low level of arsenic exposure among population was observed and increased diabetes mellitus (DM) rate was identified. Objectives We aimed to investigate the association between determinants (including low-level water arsenic exposure) of DM type 2 risk among residents of three villages of Ron Phibun subdistrict, Nakhon Si Thammarat Province. Materials and methods Secondary data from two previous community based-studies, conducted in 2000 and 2008, were utilized. Data on independent variables relating to arsenic exposure and sociodemographic characteristics were taken from questionnaires and worksheets for health-risk screening. Water samples collected during household visit were sent for analysis of arsenic level at certified laboratories. Diabetes cases (N=185) were those who had been diagnosed with DM type 2. Two groups of controls, one unmatched to cases (n=200) and one pair matched on age and gender (n=200), were selected for analysis as unmatched and matched case–control studies, respectively. A multiple imputation technique was used to impute missing values of independent variables. Multivariable logistic regression models, with independent variables for arsenic exposure and sociodemographic characteristics, were constructed. The unmatched and matched data sets were analyzed using unconditional and conditional logistic analyses, respectively. Results Older age, body mass index (BMI), having a history of illness in siblings and parents, and drinking were associated with increased DM type 2 risk. We found no convincing association between DM type 2 risk and water arsenic concentration in either study. Conclusion We did not observe meaningful association between diabetes risk and the low-to-moderate arsenic levels observed in this study. Further research is needed to confirm this finding in the study area and elsewhere in Thailand. PMID:28442938

Acute effects of mobile phone radiations on subtle energy levels of teenagers using electrophotonic imaging technique: A randomized controlled study

PubMed Central

Bhargav, Hemant; Srinivasan, TM; Bista, Suman; Mooventhan, A; Suresh, Vandana; Hankey, Alex; Nagendra, HR

2017-01-01

Background: Mobile phones induce radio frequency electromagnetic field (RF-EMF) which has been found to affect subtle energy levels of adults through Electrophotonic Imaging (EPI) technique in a previous pilot study. Materials and Methods: We enrolled 61 healthy right-handed healthy teenagers (22 males and 39 females) in the age range of 17.40 ± 0.24 years from educational institutes in Bengaluru. Subjects were randomly divided into two groups: (1) (mobile phone in ON mode [MPON] at right ear) and (2) mobile phone in OFF mode (MPOF). Subtle energy levels of various organs of the subjects were measured using gas discharge visualization Camera Pro device, in double-blind conditions, at two points of time: (1) baseline and (2) after 15 min of MPON/MPOF exposure. As the data were found normally distributed, paired and independent samples t-test were applied to perform within and between group comparisons, respectively. Results: The subtle energy levels were significantly reduced after RF-EMF exposure in MPON group as compared to MPOF group for following areas: (a) Pancreas (P = 0.001), (b) thyroid gland (P = 0.002), (c) cerebral cortex (P < 0.01), (d) cerebral vessels (P < 0.05), (e) hypophysis (P = 0.013), (f) left ear and left eye (P < 0.01), (g) liver (P < 0.05), (h) right kidney (P < 0.05), (i) spleen (P < 0.04), and (j) immune system (P < 0.02). Conclusion: Fifteen minutes of RF-EMF exposure exerted quantifiable effects on subtle energy levels of endocrine glands, nervous system, liver, kidney, spleen, and immune system of healthy teenagers. Future studies should try to correlate these findings with respective biochemical markers and standard radio-imaging techniques. PMID:28149063

Industrial hygiene walk-through survey report of E. I. Dupont de Nemours and Company, Inc. , Chocolate Bayou Plant, Alvin, Texas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fajen, J.M.

1985-05-01

A walkthrough survey of EI duPont deNemours and Company, Incorporated, Alvin, Texas was conducted in November, 1984. The purpose of the survey was to obtain information on the 1,3-butadiene monomer manufacturing process and the potential for exposure. The facility manufactured a crude product stream containing 1,3-butadiene as a coproduct of its ethylene process. The crude was refined to a 99.5% 1,3-butadiene product. The refining process occurred in a closed system, tightly maintained for economic, fire, and health-hazard reasons. The product was transferred by way of a pipeline to storage spheres for later transport off site. The facility used an open-loopmore » cylinder (bomb) technique for quality control sampling. All pumps were equipped with single mechanical seals, which were in the process of being replaced by tandem seals. Since 1962, the facility had experienced process changes and three changes of ownership. Because of these changes, records from previous owners of industrial hygiene monitoring were not available. Job titles identified as having potential exposure were processors, wage employee supervisors, production engineers, and laboratory technicians. The author concludes that a closed-loop manual quality-control sampling system should be installed to reduce exposure from this source.« less

Pulmonary function in workers exposed to diesel exhausts: the effect of control measures.

PubMed

Ulfvarson, U; Alexandersson, R; Dahlqvist, M; Ekholm, U; Bergström, B

1991-01-01

To assess the protective effect of exhausts pipe filters or respirators on pulmonary function, 15 workers in a tunnel construction site, truck and loading machine drivers, rock workers, and others were studied. The total and respirable dust, combustible matter in respirable dust, carbon monoxide, nitrogen monoxide and nitrogen dioxide were measured for each subject during entire work shifts. The effect of the exposure on the lung function variables was measured by dynamic spirometry, carbon monoxide single breath technique, and nitrogen single breath wash-out. The exhaust pipe filtering had a protective effect, directly discernible in the drivers on vital capacity and FEV1.0 and for the whole group on FEV% and TLco. The dust respirators had no effect, probably because of the difficulties in correctly using personal protection under the circumstances in the tunnel. In the absence of a true exposure assessment, control measures for diesel exhausts can be tested by medical effect studies. Catalytic particle filters of diesel exhausts are one method of rendering the emissions less irritant, although they will not remove irritant gases. An indicator of diesel exhaust exposure should include the particle fraction of the diesel exhausts, but a discrimination between different sources of organic dust must be possible.

Cardiac tissue injury resistance during myocardial infarction at adulthood by developmental exposure to cadmium.

PubMed

Zepeda, Ramiro; Castillo, Paula; Sáez, Daniel; Llanos, Miguel N; Ronco, Ana M

2012-03-01

It has been suggested that prenatal exposure to cadmium may alter the cardiovascular function during adulthood. Using the left coronary artery ligation model of acute myocardial infarction, we studied the cardiac function of female adult offspring rats exposed to cadmium (30 ppm) during gestation. The cardiac ischemic zone in the control and cadmium-exposed groups was measured 72 h post-ligation using the TPT staining technique. Offspring from cadmium-treated dams showed a significantly smaller infarcted area compared with the control group (7.1 ± 1.5 vs. 19.6 ± 2.8%, P ≤ 0.05). We also performed echocardiographic and biochemical studies, which positively correlated with the differences observed previously. To evaluate whether the effects were associated to pre-infarct tissue damage and/or angiogenic molecules, we performed histological studies and measured the expression of vascular endothelial growth factor (VEGF), and platelet endothelial cellular adhesion molecule-1 (PECAM-1). Results revealed a higher heart vascularization in the exposed offspring that was associated with an increase in PECAM and a decrease in VEGF expression. We conclude that prenatal exposure to cadmium induces fetal adaptive responses involving changes in the expression of some cardiac angiogenic molecules resulting in long-term resistance to infarction.

Induction of Salivary Proteins Modifies Measures of Both Orosensory and Postingestive Feedback during Exposure to a Tannic Acid Diet

PubMed Central

Torregrossa, Ann-Marie; Nikonova, Larissa; Bales, Michelle B.; Villalobos Leal, Maria; Smith, James C.; Contreras, Robert J.; Eckel, Lisa A.

2014-01-01

There are hundreds of proteins in saliva. Although it has long been hypothesized that these proteins modulate taste by interacting with taste receptors or taste stimuli, the functional impact of these proteins on feeding remains relatively unexplored. We have developed a new technique for saliva collection that does not interfere with daily behavioral testing and allows us to explore the relationship between feeding behavior and salivary protein expression. First, we monitored the alterations in salivary protein expression while simultaneously monitoring the animals' feeding behavior and meal patterns on a custom control diet or on the same diet mixed with 3% tannic acid. We demonstrated that six protein bands increased in density with dietary tannic acid exposure. Several of these bands were significantly correlated with behaviors thought to represent both orosensory and postingestive signaling. In a follow-up experiment, unconditioned licking to 0.01–3% tannic acid solutions was measured during a brief-access taste test before and after exposure to the tannic acid diet. In this experiment, rats with salivary proteins upregulated found the tannin solution less aversive (i.e., licked more) than those in the control condition. These data suggest a role for salivary proteins in mediating changes in both orosensory and postingestive feedback. PMID:25162297

Exposure to 50 Hz electromagnetic radiation promote early maturation and differentiation in newborn rat cerebellar granule neurons.

PubMed

Lisi, A; Ciotti, M T; Ledda, M; Pieri, M; Zona, C; Mercanti, D; Rieti, S; Giuliani, L; Grimaldi, S

2005-08-01

The wish of this work is the study of the effect of electromagnetic (EMF) radiations at a frequency of 50 Hz on the development of cerebellar granule neurons (CGN). Granule neurons, prepared from newborn rat cerebellum (8 days after birth), were cultured after plate-seeding in the presence of EMF radiations, with the plan of characterizing their cellular and molecular biochemistry, after exposure to the electromagnetic stimulus. Five days challenge to EMF radiations showed, by the cytotoxic glutamate (Glu) pulse test, a 30% decrease of cells survival, while only 5% of mortality was reported for unexposed sample. Moreover, blocking the glutamate receptor (GluR) with the Glu competitor MK-801, no toxicity effect after CGN challenge to EMF radiations and Glu was detected. By patch-clamp recording technique, the Kainate-induced currents from 6 days old exposed CGN exhibited a significant increase with respect to control cells. Western blot and reverse transcription-polymerase chain reaction (RT-PCR) analyses show that EMF exposure of rats CGN, induces a change in both GluRs proteins and mRNAs expression with respect to control. In addition, the use of monoclonal antibody raised against neurofilament protein (NF-200) reveals an increase in NF-200 synthesis in the exposed CGN. All these results indicate that exposure to non-ionizing radiations contribute to a premature expression of GluRs reducing the life span of CGN, leading to a more rapid cell maturation. (c) 2005 Wiley-Liss, Inc.

Dissecting innate immune responses with the tools of systems biology.

PubMed

Smith, Kelly D; Bolouri, Hamid

2005-02-01

Systems biology strives to derive accurate predictive descriptions of complex systems such as innate immunity. The innate immune system is essential for host defense, yet the resulting inflammatory response must be tightly regulated. Current understanding indicates that this system is controlled by complex regulatory networks, which maintain homoeostasis while accurately distinguishing pathogenic infections from harmless exposures. Recent studies have used high throughput technologies and computational techniques that presage predictive models and will be the foundation of a systems level understanding of innate immunity.

Human mutagens: evidence from paternal exposure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Narod, S.A.; Douglas, G.R.; Nestmann, E.R.

1988-01-01

The importance of inherited mutations as a cause of human disease has been established clearly through examples of well-defined genetic anomalies, such as Down syndrome and retinoblastoma. Furthermore, it is suspected that environmental contaminants induce mutations resulting in increased risk for such defects in subsequent generations of persons exposed. The present lack of direct evidence for induced inherited genetic disorders in human beings hampers the development of risk estimation techniques for extrapolation from animal models. The most extensive prospective epidemiologic studies of inherited genetic effects have involved survivors of atomic bomb detonations and patients treated with cancer chemotherapy. In neithermore » case has a significant elevation in inherited genetic effects or cancer been detected in the offspring of exposed individuals. Epidemiologic studies of subjects receiving chronic exposure may be confounded by the effect of maternal exposure during pregnancy. Consideration of only paternal exposure can minimize the confounding influence of teratogenicity, enhancing the resolving power of studies for inherited effects. Using this approach, retrospective (case-control) studies of childhood cancer patients have provided limited but suggestive evidence for inheritance of induced effects. Endpoints, such as congenital malformations and spontaneous abortion following paternal exposure, can also be considered as indicators of heritable mutagenic effects. For example, there is limited evidence suggesting that paternal exposure to anaesthetic gases may cause miscarriage and congenital abnormalities as a result of induced male germ cell mutations. 104 references.« less

Lyme disease and conservation

USGS Publications Warehouse

Ginsberg, H.

1994-01-01

Lyme disease is a tick-borne illness that is wide-spread in North America, especially in the northeastern and northcentral United States. This disease could negatively influence efforts to conserve natural populations in two ways: (1) the disease could directly affect wild animal health; and (2) tick control efforts could adversely affect natural populations and communities. Lyme disease affects several domestic animals, but symptoms have been reported in only a few wild species. Direct effects of Lyme disease on wild animal populations have not been reported, but the disease should be considered as a possible cause in cases of unexplained population declines in endemic areas. Methods available to manage ticks and Lyme disease include human self-protection techniques, manipulation of habitats and hosts species populations, biological control, and pesticide applications. The diversity of available techniques allows selection of approaches to minimize environmental effects by (1) emphasizing personal protection techniques, (2) carefully targeting management efforts to maximize efficiency, and (3) integrating environmentally benign techniques to improve management while avoiding broad-scale environmentally destructive approaches. The environmental effects of Lyme disease depend, to a large extent, on the methods chosen to minimize human exposure to infected ticks. Conservation biologists can help design tick management programs that effectively lower the incidence of human Lyme disease while simultaneously minimizing negative effects on natural populations.

Histological observation of hairless mice skin after exposure to Simulated Solar Light: Comparison between the histological findings with different methodologies and 3R principle correlations.

PubMed

Hossy, Bryan Hudson; Leitão, Alvaro Augusto da Costa; Torres, Renata Bosco; Ramos-E-Silva, Marcia; Miguel, Nádia Campos de Oliveira; de Pádula, Marcelo

2018-03-01

Albino hairless mouse (AHM) has been used as a biological model in photodermatology. However, the experimental landscape is diverse to follow and need particular attention. Irradiation parameters were investigated for the development of a protocol to assess alterations in the AHM skin using Simulated Solar Light (SSL). The present study was compared with published articles (last 15 years) according to irradiation protocols, morphological findings to minimize animal suffering and UV exposure. Three groups: Control (G1), experimental - sunburn (G2) and skin photodamage assay (G3). G2 were immobilized and exposed to SSL once for 15, 30 and 45min. G3 were exposed to SSL, without immobilization, for 15min once a day for one week. The dorsal skin was analyzed using hematoxylin and eosin technique. G2 displayed different sunburn degrees. Based on the profile of the observed morphological alterations, a 15min irradiation was chosen as the exposure time to expose G3, without immobilization, for 5 consecutive days. These conditions produced the same morphological changes in the AHM with a shorter solar exposure time, without immobilizing the animals but using environmental exposure fluences, conforming to 3R (reduction - refinement - replacement) recommendations. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

MTV's "Staying Alive" global campaign promoted interpersonal communication about HIV and positive beliefs about HIV prevention.

PubMed

Geary, Cynthia Waszak; Burke, Holly McClain; Castelnau, Laure; Neupane, Shailes; Sall, Yacine Ba; Wong, Emily; Tucker, Heidi Toms

2007-02-01

In 2002 MTV launched a global multicomponent HIV prevention campaign, "Staying Alive," reaching over 166 countries worldwide. An evaluation of this campaign focused on three diverse sites: Kathmandu, Nepal; São Paulo, Brazil; and Dakar, Senegal. Data were collected before and after campaign implementation through population-based household surveys. Using linear regression techniques, our evaluation examined the effects of campaign exposure on interpersonal communication about HIV and the effects of campaign exposure and interpersonal communication on beliefs about HIV prevention. We found a consistent positive effect of exposure on interpersonal communication across all sites, though there were differences among sites with regard to whom the respondent talked about HIV. We also found a consistent positive effect of exposure on HIV prevention beliefs across sites when interpersonal communication was simultaneously entered into the model. Finally, in two sites we found a relationship between interpersonal communication and HIV prevention beliefs, controlling for exposure, though again, the effects differed by the type of person the communication was with. These similar findings in three diverse sites provide ecological validity of the findings that "Staying Alive" promoted interpersonal communication and influenced young people's beliefs about HIV prevention in a positive way, evidence for the potential of a global media campaign to have an impact on social norms.

INTEGRATED PROBABILISTIC AND DETERMINISTIC MODELING TECHNIQUES IN ESTIMATING EXPOSURE TO WATER-BORNE CONTAMINANTS: PART 2 PHARMACOKINETIC MODELING

EPA Science Inventory

The Total Exposure Model (TEM) uses deterministic and stochastic methods to estimate the exposure of a person performing daily activities of eating, drinking, showering, and bathing. There were 250 time histories generated, by subject with activities, for the three exposure ro...

INTEGRATED PROBABILISTIC AND DETERMINISTIC MODELING TECHNIQUES IN ESTIMATING EXPOSURE TO WATER-BORNE CONTAMINANTS: PART 1 EXPOSURE MODELING

EPA Science Inventory

Exposure to contaminants originating in the domestic water supply is influenced by a number of factors, including human activities, water use behavior, and physical and chemical processes. The key role of human activities is very apparent in exposure related to volatile water-...

Enhanced methodology of focus control and monitoring on scanner tool

NASA Astrophysics Data System (ADS)

Chen, Yen-Jen; Kim, Young Ki; Hao, Xueli; Gomez, Juan-Manuel; Tian, Ye; Kamalizadeh, Ferhad; Hanson, Justin K.

2017-03-01

As the demand of the technology node shrinks from 14nm to 7nm, the reliability of tool monitoring techniques in advanced semiconductor fabs to achieve high yield and quality becomes more critical. Tool health monitoring methods involve periodic sampling of moderately processed test wafers to detect for particles, defects, and tool stability in order to ensure proper tool health. For lithography TWINSCAN scanner tools, the requirements for overlay stability and focus control are very strict. Current scanner tool health monitoring methods include running BaseLiner to ensure proper tool stability on a periodic basis. The focus measurement on YIELDSTAR by real-time or library-based reconstruction of critical dimensions (CD) and side wall angle (SWA) has been demonstrated as an accurate metrology input to the control loop. The high accuracy and repeatability of the YIELDSTAR focus measurement provides a common reference of scanner setup and user process. In order to further improve the metrology and matching performance, Diffraction Based Focus (DBF) metrology enabling accurate, fast, and non-destructive focus acquisition, has been successfully utilized for focus monitoring/control of TWINSCAN NXT immersion scanners. The optimal DBF target was determined to have minimized dose crosstalk, dynamic precision, set-get residual, and lens aberration sensitivity. By exploiting this new measurement target design, 80% improvement in tool-to-tool matching, >16% improvement in run-to-run mean focus stability, and >32% improvement in focus uniformity have been demonstrated compared to the previous BaseLiner methodology. Matching <2.4 nm across multiple NXT immersion scanners has been achieved with the new methodology of set baseline reference. This baseline technique, with either conventional BaseLiner low numerical aperture (NA=1.20) mode or advanced illumination high NA mode (NA=1.35), has also been evaluated to have consistent performance. This enhanced methodology of focus control and monitoring on multiple illumination conditions, opens an avenue to significantly reduce Focus-Exposure Matrix (FEM) wafer exposure for new product/layer best focus (BF) setup.

A randomised-controlled trial investigating potential underlying mechanisms of a functionality-based approach to improving women's body image.

PubMed

Alleva, Jessica M; Diedrichs, Phillippa C; Halliwell, Emma; Martijn, Carolien; Stuijfzand, Bobby G; Treneman-Evans, Georgia; Rumsey, Nichola

2018-06-01

Focusing on body functionality is a promising technique for improving women's body image. This study replicates prior research in a large novel sample, tests longer-term follow-up effects, and investigates underlying mechanisms of these effects (body complexity and body-self integration). British women (N = 261) aged 18-30 who wanted to improve their body image were randomised to Expand Your Horizon (three online body functionality writing exercises) or an active control. Trait body image was assessed at Pretest, Posttest, 1-week, and 1-month Follow-Up. To explore whether changes in body complexity and body-self integration 'buffer' the impact of negative body-related experiences, participants also completed beauty-ideal media exposure. Relative to the control, intervention participants experienced improved appearance satisfaction, functionality satisfaction, body appreciation, and body complexity at Posttest, and at both Follow-Ups. Neither body complexity nor body-self integration mediated intervention effects. Media exposure decreased state body satisfaction among intervention and control participants, but neither body complexity nor body-self integration moderated these effects. The findings underscore the value of focusing on body functionality for improving body image and show that effects persist one month post-intervention. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effect of Two Oil Dispersants on Larval Grass Shrimp (Palaemonetes pugio) Development.

NASA Astrophysics Data System (ADS)

Betancourt, P.; Key, P. B.; Chung, K. W.; DeLorenzo, M. E.

2015-12-01

The study focused on the effects that two oil dispersants, Corexit® EC9500A and Finasol® OSR52, have on the development of larval grass shrimp, (Palaemonetes pugio). The hypothesis was that Finasol would have a greater effect on larval grass shrimp development than Corexit. The experiment was conducted using 300 grass shrimp larvae that were 24 hours old. Each larva was exposed individually. In total, five sub-lethal concentrations were tested for each dispersant (control, 1.25, 2.50, 5.0,10.0 mg/L). The larvae were exposed for five days then transferred to clean seawater until metamorphosis into the juvenile stage. Key data measurements recorded included number of days to become juveniles, number of instars, length, dry weight, and mortality. Data from exposed shrimp was compared to the results of the control for each dispersant concentration. Corexit and Finasol exposure treatments of 5 mg/L and 10 mg/L showed significantly higher values for number of days and number of instars to reach juvenile status than values obtained from unexposed, control shrimp. Overall, mortality was higher in the Finasol treatments but the two dispersants did not respond significantly different from one another. Future studies are needed to determine the long term effects of dispersant exposure on all grass shrimp life stages and how any dispersant exposure impacts grass shrimp populations. Grass shrimp serve as excellent toxicity indicators of estuaries, and further studies will help to develop better oil spill mitigation techniques.

Dissemination of evidence-based practices for anxiety disorders in Wyoming: a survey of practicing psychotherapists.

PubMed

Hipol, Leilani J; Deacon, Brett J

2013-03-01

Despite the well-established effectiveness of exposure-based cognitive-behavioral therapy (CBT) in the treatment of anxiety disorders, therapists have been slow to adopt CBT into their clinical practice. The present study was conducted to examine the utilization of psychotherapy techniques for anxiety disorders among community practitioners in a rural setting in order to determine the current status of the dissemination of CBT. A sample of 51 licensed psychotherapists from various mental health professions was recruited from online practice listings in the state of Wyoming. Participants completed a survey assessing their use of various psychotherapy techniques in the past 12 months for clients with obsessive-compulsive disorder, post-traumatic stress disorder, panic disorder, and social phobia. Nearly all psychotherapists reported providing CBT, and techniques such as cognitive restructuring, arousal-reduction strategies, and mindfulness were used by the vast majority of respondents. Therapist-assisted exposure was rarely utilized, and providers who delivered exposure therapy often did so alongside other techniques of questionable compatibility with this approach. Non-evidence-based techniques were frequently used, particularly by self-proclaimed anxiety specialists. Our findings highlight the successes and failures of efforts to disseminate exposure-based CBT to community practitioners. Implications for clinical training and practice are discussed.

Application of optical correlation techniques to particle imaging velocimetry

NASA Technical Reports Server (NTRS)

Wernet, Mark P.; Edwards, Robert V.

1988-01-01

Pulsed laser sheet velocimetry yields nonintrusive measurements of velocity vectors across an extended 2-dimensional region of the flow field. The application of optical correlation techniques to the analysis of multiple exposure laser light sheet photographs can reduce and/or simplify the data reduction time and hardware. Here, Matched Spatial Filters (MSF) are used in a pattern recognition system. Usually MSFs are used to identify the assembly line parts. In this application, the MSFs are used to identify the iso-velocity vector contours in the flow. The patterns to be recognized are the recorded particle images in a pulsed laser light sheet photograph. Measurement of the direction of the partical image displacements between exposures yields the velocity vector. The particle image exposure sequence is designed such that the velocity vector direction is determined unambiguously. A global analysis technique is used in comparison to the more common particle tracking algorithms and Young's fringe analysis technique.

Health and immunology study following exposure to toxigenic fungi (Stachybotrys chartarum) in a water-damaged office environment.

PubMed

Johanning, E; Biagini, R; Hull, D; Morey, P; Jarvis, B; Landsbergis, P

1996-01-01

There is growing concern about adverse health effects of fungal bio-aerosols on occupants of water-damaged buildings. Accidental, occupational exposure in a nonagricultural setting has not been investigated using modern immunological laboratory tests. The objective of this study was to evaluate the health status of office workers after exposure to fungal bio-aerosols, especially Stachybotrys chartarum (atra) (S. chartarum) and its toxigenic metabolites (satratoxins), and to study laboratory parameters or biomarkers related to allergic or toxic human health effects. Exposure characterization and quantification were performed using microscopic, culture, and chemical techniques. The study population (n = 53) consisted of 39 female and 14 male employees (mean age 34.8 years) who had worked for a mean of 3.1 years at a problem office site; a control group comprised 21 persons (mean age 37.5 years) without contact with the problem office site. Health complaints were surveyed with a 187-item standardized questionnaire. A comprehensive test battery was used to study the red and white blood cell system, serum chemistry, immunology/antibodies, lymphocyte enumeration and function. Widespread fungal contamination of water-damaged, primarily cellulose material with S. chartarum was found. S. chartarum produced a macrocyclic trichothecene, satratoxin H, and spirocyclic lactones. Strong associations with exposure indicators and significant differences between employees (n = 53) and controls (n = 21) were found for lower respiratory system symptoms, dermatological symptoms, eye symptoms, constitutional symptoms, chronic fatigue symptoms and several enumeration and function laboratory tests, mainly of the white blood cell system. The proportion of mature T-lymphocyte cells (CD3%) was lower in employees than in controls, and regression analyses showed significantly lower CD3% among those reporting a history of upper respiratory infections. Specific S. chartarum antibody tests (IgE and IgG) showed small differences (NS). It is concluded that prolonged and intense exposure to toxigenic S. chartarum and other atypical fungi was associated with reported disorders of the respiratory and central nervous systems, reported disorders of the mucous membranes and a few parameters pertaining to the cellular and humoral immune system, suggesting a possible immune competency dysfunction.

Enhancing inhibitory learning to reduce overeating: Design and rationale of a cue exposure therapy trial in overweight and obese women.

PubMed

van den Akker, Karolien; Schyns, Ghislaine; Jansen, Anita

2016-07-01

The prevalence of overweight and obesity has increased substantially over the last decades. Weight loss attempts in overweight individuals are common, though they seldom result in successful long-term weight loss. One very promising treatment is food cue exposure therapy, during which overweight individuals are repeatedly exposed to food-associated cues (e.g., the sight, smell and taste of high-calorie foods, overeating environments) without eating in order to extinguish cue-elicited appetitive responses to food cues. However, only few studies have tested the effectiveness of cue exposure, especially with regards to weight loss. For exposure treatment of anxiety disorders, it has been proposed that inhibitory learning is critical for exposure to be effective. In this RCT, we translated techniques proposed by Craske et al. (2014) to the appetitive domain and developed a novel cue exposure therapy for overeating aimed at maximizing inhibitory learning. The current RCT tested the effectiveness of this 8-session cue exposure intervention relative to a control intervention in 45 overweight adult (aged 18-60) females at post-treatment and 3-month follow-up, of which 39 participants completed the study. Weight loss, eating psychopathology, food cue reactivity, and snacking behaviour were studied as main treatment outcomes, and mediators and moderators of treatment effects were studied. The presented study design represents an innovative effort to provide valuable clinical recommendations for the treatment of overeating and obesity. Copyright © 2016 Elsevier Inc. All rights reserved.

Biologic fixation through bridge plating for comminuted shaft fracture of the clavicle: technical aspects and prospective clinical experience with a minimum of 12-month follow-up.

PubMed

Jung, Gu Hee; Park, Chang-Min; Kim, Jae-Do

2013-12-01

For comminuted shaft fracture of clavicle, the operative goal, aside from sound bone healing without complications of direct reduction, is maintenance of the original length in order to maintain the normal biomechanics of adjacent joint. Our bridge plating technique utilizing distraction through a lumbar spreader was expected to be effective for restoring clavicular length with soft tissue preservation. However, there are two disadvantages. First, there is more exposure to radiation compared to conventional plating; and second, it is difficult to control the rotational alignment. Despite these disadvantages, our technique has important benefits, in particular, the ability to preserve clavicular length without soft tissue injury around the fracture site.

A New Radiofrequency Ablation Procedure to Treat Sacroiliac Joint Pain.

PubMed

Cheng, Jianguo; Chen, See Loong; Zimmerman, Nicole; Dalton, Jarrod E; LaSalle, Garret; Rosenquist, Richard

2016-01-01

Low back pain may arise from disorders of the sacroiliac joint in up to 30% of patients. Radiofrequency ablation (RFA) of the nerves innervating the sacroiliac joint has been shown to be a safe and efficacious strategy. We aimed to develop a new RFA technique to relieve low back pain secondary to sacroiliac joint disorders. Methodology development with validation through prospective observational non-randomized trial (PONRT). Academic multidisciplinary health care system, Ohio, USA. We devised a guide-block to facilitate accurate placement of multiple electrodes to simultaneously ablate the L5 dorsal ramus and lateral branches of the S1, S2, and S3 dorsal rami. This was achieved by bipolar radiofrequency ablation (b-RFA) to create a strip lesion from the lateral border of the base of the sacral superior articular process (L5-S1 facet joint) to the lateral border of the S3 sacral foramen. We applied this technique in 31 consecutive patients and compared the operating time, x-ray exposure time and dose, and clinical outcomes with patients (n = 62) who have been treated with the cooled radiofrequency technique. Patients' level of pain relief was reported as < 50%, 50 - 80%, and > 80% pain relief at one, 3, 6, and 12 months after the procedure. The relationship between RFA technique and duration of pain relief was evaluated using interval-censored multivariable Cox regression. The new technique allowed reduction of operating time by more than 50%, x-ray exposure time and dose by more than 80%, and cost by more than $1,000 per case. The percent of patients who achieved > 50% pain reduction was significantly higher in the b-RFA group at 3, 6, and 12 months follow-up, compared to the cooled radiofrequency group. No complications were observed in either group. Although the major confounding factors were taken into account in the analysis, use of historical controls does not balance observed and unobserved potential confounding variables between groups so that the reported results are potentially confounded. Compared to the cooled radiofrequency ablation (c-RFA) technique, the new b-RFA technique reduced operating time by more than 50%, decreased x-ray exposure by more than 80%, and cut the cost by more than $1000 per case. The new method was associated with significantly improved clinical outcomes despite the limitations of the study design. Thus this new technique appeared to be safe, efficacious, and cost-effective. Key words: Sacroiliac joint pain, sacroiliac joint, low back pain, radiofrequency ablation (RFA), bipolar radiofrequency ablation (b-RFA), cooled radiofrequency ablation (c-RFA), cost-effectiveness.

30 CFR 56.5005 - Control of exposure to airborne contaminants.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Control of exposure to airborne contaminants... Air Quality and Physical Agents Air Quality § 56.5005 Control of exposure to airborne contaminants. Control of employee exposure to harmful airborne contaminants shall be, insofar as feasible, by prevention...

30 CFR 57.5005 - Control of exposure to airborne contaminants.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Control of exposure to airborne contaminants... Underground § 57.5005 Control of exposure to airborne contaminants. Control of employee exposure to harmful airborne contaminants shall be, insofar as feasible, by prevention of contamination, removal by exhaust...

New technologies in treatment of atrial fibrillation in cardiosurgical patients

NASA Astrophysics Data System (ADS)

Evtushenko, A. V.; Evtushenko, V. V.; Bykov, A. N.; Sergeev, V. S.; Syryamkin, V. I.; Kistenev, Yu. V.; Anfinogenova, Ya. D.; Smyshlyaev, K. A.; Kurlov, I. O.

2015-11-01

The article is devoted to the evaluation of the results of clinical application of penetrating radiofrequency ablation techniques on atrial myocardium. Total operated on 241 patients with valvular heart disease and coronary heart disease complicated with atrial fibrillation. All operations were performed under cardiopulmonary bypass and cardioplegia. The main group consists of 141 patients which were operated using penetrating technique radiofrequency exposure. The control group consisted of 100 patients who underwent surgery with the use of "classical" monopolar RF-ablation technique. Both groups were not significantly different on all counts before surgery. Patients with previous heart surgery were excluded during the selection of candidates for the procedure, due to the presence of adhesions in the pericardium, that do not allow good visualization of left atrium, sufficient to perform this procedure. Penetrating technique has significantly higher efficiency compared to the "classic" technique in the early and long-term postoperative periods. In the early postoperative period, its efficiency is 93%, and in the long term is 88%. The efficacy of "classical" monopolar procedure is below: 86% and 68% respectively.

Self-reported Lupus flare: Association with everyday home and personal product exposure.

PubMed

Squance, Marline L; Reeves, Glenn; Attia, John; Bridgman, Howard; Guest, Maya

2015-01-01

The number of chemicals in household products has driven concern about potential adverse health through their use. Most research concentrates on product chemicals with reproductive and carcinogenic consequences, however some evidence exists that immune effects can lead to exacerbation of autoimmune illnesses such as lupus (SLE). This paper examines household and personal product exposure patterns in a pilot case/control study of female Australians. We also examined associations between common product exposure and SLE symptom exacerbation over a year period. We enrolled 41 control and 80 SLE participants aged 18-80 years. Qualitative techniques of structured interview and thematic analysis retrospectively explored patterns of product use, and flare history data of SLE participants. Negative binomial regression models explored associations between self-reported flare (SRF) days and exposure to 34 common home product groups. Mean product counts did not differ between participant groups (mean 33.1: SD 11.8), or flare groups (flare mean 32.6:SD 12, no-flare 31.8:SD 6.6). Products used for personal hygiene and general house cleaning were most frequently used.Significant association with increased SRF day relative risk (IRR) was seen for bath oil use (IRR 1.008, CI 1.00-1.02). Paradoxical "protective" effects, (reduced SRF days) were found for cleansing beauty (IRR 0.999, CI 0.998-0.999), make-up (IRR 0.998, CI 0.997-0.999); adhesives (IRR 0.994, CI 0.991-0.997) and paint (IRR 0.99, CI 0.986-0.995). Everyday product exposures can impact on symptom exacerbation in SLE. Some offering protection and others increased health risk. Identifying environmental associations offer the possibility of life-style interventions to reduce illness impact.

Efficacy of Pseudomonas fluorescens (Pf-CL145A) spray dried powder for controlling zebra mussels adhering to test substrates

USGS Publications Warehouse

Luoma, James A.; Severson, Todd J.; Weber, Kerry L.; Mayer, Denise A.

2015-01-01

Approximately 30 days after exposure, zebra mussels were sorted into live and dead, and enumerated. Mean survival of zebra mussels in control treatments exceeded 95 percent. Mean survival of zebra mussels in the Lake Carlos WWC SDP-treated groups ranged from 0.5 to 2.1 percent and when compared at the same exposure duration, no difference was detected in survival between the 50 and 100 milligrams per liter (mg/L) treatment groups. Similarly, mean survival of zebra mussels in the Shawano Lake WWC SDP-treated groups ranged from 2.0 to 12.6 percent and when compared at the same exposure duration, no difference was detected in survival between the 50- and 100-mg/L treatment groups. Mean survival of zebra mussels in the Lake Carlos BI trial SDP-treated groups did not differ (p = 0.93) and was 18.1 and 18.0 percent in the 50- and 100-mg/L treatment groups, respectively. Mean survival of zebra mussels in the Shawano Lake BI trial SDP-treated groups differed (p < 0.01) and was 2.9 and 0.9 percent in the 50- and 100-mg/L treatment groups, respectively. Survival of zebra mussels assigned to the SDP-treated groups in the Lake Carlos WWC trial (12-hour exposure duration) differed from the survival of zebra mussels assigned to the SDP-treated groups in the Lake Carlos BI trial; however, after modification of the BI application technique, no difference (p = 0.22) was detected between the survival of zebra mussel in the Shawano Lake WWC (12-hour exposure duration) and BI trials.

PARP-1 depletion in combination with carbon ion exposure significantly reduces MMPs activity and overall increases TIMPs expression in cultured HeLa cells.

PubMed

Ghorai, Atanu; Sarma, Asitikantha; Chowdhury, Priyanka; Ghosh, Utpal

2016-09-22

Hadron therapy is an innovative technique where cancer cells are precisely killed leaving surrounding healthy cells least affected by high linear energy transfer (LET) radiation like carbon ion beam. Anti-metastatic effect of carbon ion exposure attracts investigators into the field of hadron biology, although details remain poor. Poly(ADP-ribose) polymerase-1 (PARP-1) inhibitors are well-known radiosensitizer and several PARP-1 inhibitors are in clinical trial. Our previous studies showed that PARP-1 depletion makes the cells more radiosensitive towards carbon ion than gamma. The purpose of the present study was to investigate combining effects of PARP-1 inhibition with carbon ion exposure to control metastatic properties in HeLa cells. Activities of matrix metalloproteinases-2, 9 (MMP-2, MMP-9) were measured using the gelatin zymography after 85 MeV carbon ion exposure or gamma irradiation (0- 4 Gy) to compare metastatic potential between PARP-1 knock down (HsiI) and control cells (H-vector - HeLa transfected with vector without shRNA construct). Expression of MMP-2, MMP-9, tissue inhibitor of MMPs such as TIMP-1, TIMP-2 and TIMP-3 were checked by immunofluorescence and western blot. Cell death by trypan blue, apoptosis and autophagy induction were studied after carbon ion exposure in each cell-type. The data was analyzed using one way ANOVA and 2-tailed paired-samples T-test. PARP-1 silencing significantly reduced MMP-2 and MMP-9 activities and carbon ion exposure further diminished their activities to less than 3 % of control H-vector. On the contrary, gamma radiation enhanced both MMP-2 and MMP-9 activities in H-vector but not in HsiI cells. The expression of MMP-2 and MMP-9 in H-vector and HsiI showed different pattern after carbon ion exposure. All three TIMPs were increased in HsiI, whereas only TIMP-1 was up-regulated in H-vector after irradiation. Notably, the expressions of all TIMPs were significantly higher in HsiI than H-vector at 4 Gy. Apoptosis was the predominant mode of cell death and no autophagic death was observed. Our study demonstrates for the first time that PARP-1 inhibition in combination with carbon ion synergistically decreases MMPs activity along with overall increase of TIMPs. These data open up the possibilities of improvement of carbon ion therapy with PARP-1 inhibition to control highly metastatic cancers.

An evaluation of retrofit engineering control interventions to reduce perchloroethylene exposures in commercial dry-cleaning shops.

PubMed

Earnest, G Scott; Ewers, Lynda M; Ruder, Avima M; Petersen, Martin R; Kovein, Ronald J

2002-02-01

Real-time monitoring was used to evaluate the ability of engineering control devices retrofitted on two existing dry-cleaning machines to reduce worker exposures to perchloroethylene. In one dry-cleaning shop, a refrigerated condenser was installed on a machine that had a water-cooled condenser to reduce the air temperature, improve vapor recovery, and lower exposures. In a second shop, a carbon adsorber was retrofitted on a machine to adsorb residual perchloroethylene not collected by the existing refrigerated condenser to improve vapor recovery and reduce exposures. Both controls were successful at reducing the perchloroethylene exposures of the dry-cleaning machine operator. Real-time monitoring was performed to evaluate how the engineering controls affected exposures during loading and unloading the dry-cleaning machine, a task generally considered to account for the highest exposures. The real-time monitoring showed that dramatic reductions occurred in exposures during loading and unloading of the dry-cleaning machine due to the engineering controls. Peak operator exposures during loading and unloading were reduced by 60 percent in the shop that had a refrigerated condenser installed on the dry-cleaning machine and 92 percent in the shop that had a carbon adsorber installed. Although loading and unloading exposures were dramatically reduced, drops in full-shift time-weighted average (TWA) exposures were less dramatic. TWA exposures to perchloroethylene, as measured by conventional air sampling, showed smaller reductions in operator exposures of 28 percent or less. Differences between exposure results from real-time and conventional air sampling very likely resulted from other uncontrolled sources of exposure, differences in shop general ventilation before and after the control was installed, relatively small sample sizes, and experimental variability inherent in field research. Although there were some difficulties and complications with installation and maintenance of the engineering controls, this study showed that retrofitting engineering controls may be a feasible option for some dry-cleaning shop owners to reduce worker exposures to perchloroethylene. By installing retrofit controls, a dry-cleaning facility can reduce exposures, in some cases dramatically, and bring operators into compliance with the Occupational Safety and Health Administration (OSHA) peak exposure limit of 300 ppm. Retrofit engineering controls are also likely to enable many dry-cleaning workers to lower their overall personal TWA exposures to perchloroethylene.

Use of direct versus indirect preparation data for assessing risk associated with airborne exposures at asbestos-contaminated sites.

PubMed

Goldade, Mary Patricia; O'Brien, Wendy Pott

2014-01-01

At asbestos-contaminated sites, exposure assessment requires measurement of airborne asbestos concentrations; however, the choice of preparation steps employed in the analysis has been debated vigorously among members of the asbestos exposure and risk assessment communities for many years. This study finds that the choice of preparation technique used in estimating airborne amphibole asbestos exposures for risk assessment is generally not a significant source of uncertainty. Conventionally, the indirect preparation method has been less preferred by some because it is purported to result in false elevations in airborne asbestos concentrations, when compared to direct analysis of air filters. However, airborne asbestos sampling in non-occupational settings is challenging because non-asbestos particles can interfere with the asbestos measurements, sometimes necessitating analysis via indirect preparation. To evaluate whether exposure concentrations derived from direct versus indirect preparation techniques differed significantly, paired measurements of airborne Libby-type amphibole, prepared using both techniques, were compared. For the evaluation, 31 paired direct and indirect preparations originating from the same air filters were analyzed for Libby-type amphibole using transmission electron microscopy. On average, the total Libby-type amphibole airborne exposure concentration was 3.3 times higher for indirect preparation analysis than for its paired direct preparation analysis (standard deviation = 4.1), a difference which is not statistically significant (p = 0.12, two-tailed, Wilcoxon signed rank test). The results suggest that the magnitude of the difference may be larger for shorter particles. Overall, neither preparation technique (direct or indirect) preferentially generates more precise and unbiased data for airborne Libby-type amphibole concentration estimates. The indirect preparation method is reasonable for estimating Libby-type amphibole exposure and may be necessary given the challenges of sampling in environmental settings. Relative to the larger context of uncertainties inherent in the risk assessment process, uncertainties associated with the use of airborne Libby-type amphibole exposure measurements derived from indirect preparation analysis are low. Use of exposure measurements generated by either direct or indirect preparation analyses is reasonable to estimate Libby-type Amphibole exposures in a risk assessment.

In vitro cytogenetic studies of organic chemicals found as contaminants in spacecraft cabin atmospheres

NASA Technical Reports Server (NTRS)

Torres, J.

1986-01-01

Astronauts can be exposed during spaceflight to organic chemical contaminants in the spacecraft cabin atmosphere. Toxic exposures may cause lesions in the cellular DNA which are subsequently expressed as sister-chromatid exchanges (SCE). Analysis of SCE is a sensitive short-term assay technique to detect and quantitate exposures to DNA-damaging (mutagenic) substances. The increase in SCE incidence over baseline (control) levels is generally proportional to the concentration of the mutagen and to the duration of exposure. Dichloromethane (methylene chloride) was chosen for this study since it occurred as an atmospheric contaminant in ten of the first 12 STS flights, and has been reported to have toxic and mutagenic effects in various test systems. Glutaraldehyde was chosen because relatively few data are available on the toxicity or mutagenicity of this common biological fixative, which is carried on STS flights for use in biological experiments. The BHK-21 baby hamster kidney cell line was the in vitro test system used in this study. Neither dichloromethane (10 ppm to 500 ppm) nor glutaraldehyde (1 ppm to 10 ppm) increased SCE levels following 20-hour exposure of BHK-21 cells to the test chemicals.

Sobol' sensitivity analysis for stressor impacts on honeybee ...

EPA Pesticide Factsheets

We employ Monte Carlo simulation and nonlinear sensitivity analysis techniques to describe the dynamics of a bee exposure model, VarroaPop. Daily simulations are performed of hive population trajectories, taking into account queen strength, foraging success, mite impacts, weather, colony resources, population structure, and other important variables. This allows us to test the effects of defined pesticide exposure scenarios versus controlled simulations that lack pesticide exposure. The daily resolution of the model also allows us to conditionally identify sensitivity metrics. We use the variancebased global decomposition sensitivity analysis method, Sobol’, to assess firstand secondorder parameter sensitivities within VarroaPop, allowing us to determine how variance in the output is attributed to each of the input variables across different exposure scenarios. Simulations with VarroaPop indicate queen strength, forager life span and pesticide toxicity parameters are consistent, critical inputs for colony dynamics. Further analysis also reveals that the relative importance of these parameters fluctuates throughout the simulation period according to the status of other inputs. Our preliminary results show that model variability is conditional and can be attributed to different parameters depending on different timescales. By using sensitivity analysis to assess model output and variability, calibrations of simulation models can be better informed to yield more

Evaluation of thermal and non-thermal effects of UHF RFID exposure on biological drugs.

PubMed

Calcagnini, Giovanni; Censi, Federica; Maffia, Michele; Mainetti, Luca; Mattei, Eugenio; Patrono, Luigi; Urso, Emanuela

2012-11-01

The Radio Frequency Identification (RFID) technology promises to improve several processes in the healthcare scenario, especially those related to traceability of people and things. Unfortunately, there are still some barriers limiting the large-scale deployment of these innovative technologies in the healthcare field. Among these, the evaluation of potential thermal and non-thermal effects due to the exposure of biopharmaceutical products to electromagnetic fields is very challenging, but still slightly investigated. This paper aims to setup a controlled RF exposure environment, in order to reproduce a worst-case exposure of pharmaceutical products to the electromagnetic fields generated by the UHF RFID devices placed along the supply chain. Radiated powers several times higher than recommended by current normative limits were applied (10 W and 20 W). The electric field strength at the exposed sample location, used in tests, was as high as 100 V/m. Non-thermal effects were evaluated by chromatography techniques and in vitro assays. The results obtained for a particular case study, the ActrapidTM human insulin preparation, showed temperature increases lower than 0.5 °C and no significant changes in the structure and performance of the considered drug.

Contamination control research activities for space optics in JAXA RANDD

NASA Astrophysics Data System (ADS)

Kimoto, Y.

2017-11-01

Contamination control research activities for space optics projects in JAXA R&D are described. More accurate contamination control techniques are requested because of intensified recent science mission requirements. One approach to control the contamination effects is analysis by software. JAXA has been developing a contamination analytical tool "J-SPICE" (Japanese Spacecraft Induced Contamination analysis software) as well as experiment facilities to improve the J-SPICE. A reflection model in J-SPICE has been experimentally verified and outgassing model data has been acquired by a facility. JAXA has developed a facility which could determine the influence of the contamination at a specific wavelength by combining a vacuum chamber with an I-R spectrometer and performed an experiment to inspect the effect of baking. Space material exposure experiment results reveal the actual thickness of the contamination layer in ISS orbit.

Control technology for Richard Klinger, Inc. , Sidney, Ohio. Indepth survey report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heitbrink, W.A.

1984-06-25

Environmental and breathing zone samples were analyzed for asbestos (1332214) at Richard Klinger Incorporated (SIC-3069), Sidney, Ohio in August 1983 as part of an in depth study of dust control during bag opening, dumping, and disposal. Asbestos control technology was inspected. Control of asbestos at the facility was achieved by using an automatic cleaner to clean spills and routinely remove settled and spilled asbestos from the floor. During periods of peak exposure, workers wore NIOSH approved respirators and disposable coveralls. Air sampling was used to identify any asbestos control problems. Closed bales of asbestos were torn. The author concludes thatmore » operation of the bag slitter does not increase asbestos concentrations. Closed bales of asbestos may be an emission source. Improving the quality of the wrapping around the bales and handling techniques during shipment are recommended.« less

Mold growth on gypsum wallboard--a summary of three techniques.

PubMed

Menetrez, M Y; Foarde, K K; Webber, T D; Dean, T R; Betancourt, D A

2009-01-01

Reducing occupant exposure to mold growing on damp gypsum wallboard and controlling mold contamination in the indoor environment was studied through 1) delineation of environmental conditions required to promote and avoid mold growth and 2) efficacy testing of antimicrobial products, specifically cleaners and paints, on gypsum wallboard (GWB) surfaces. The effects of moisture and relative humidity (RH) on mold growth and transport are important in avoiding and eliminating problems. These effects have been demonstrated on GWB and are discussed in this article for use as control guidance. The authors discuss the efficacy of antimicrobial cleaners and paints to remove, eliminate, or control mold growth on GWB. Research to control Stachybotrys chartarum growth using 13 separate antimicrobial cleaners and nine varieties of antimicrobial paint on contaminated GWB was performed in laboratory testing. GWB surfaces were subjected to high RH. GWB control measures are summarized and combined, and the antimicrobial product results are explained.

Fine PM measurements: personal and indoor air monitoring.

PubMed

Jantunen, M; Hänninen, O; Koistinen, K; Hashim, J H

2002-12-01

This review compiles personal and indoor microenvironment particulate matter (PM) monitoring needs from recently set research objectives, most importantly the NRC published "Research Priorities for Airborne Particulate Matter (1998)". Techniques and equipment used to monitor PM personal exposures and microenvironment concentrations and the constituents of the sampled PM during the last 20 years are then reviewed. Development objectives are set and discussed for personal and microenvironment PM samplers and monitors, for filter materials, and analytical laboratory techniques for equipment calibration, filter weighing and laboratory climate control. The progress is leading towards smaller sample flows, lighter, silent, independent (battery powered) monitors with data logging capacity to store microenvironment or activity relevant sensor data, advanced flow controls and continuous recording of the concentration. The best filters are non-hygroscopic, chemically pure and inert, and physically robust against mechanical wear. Semiautomatic and primary standard equivalent positive displacement flow meters are replacing the less accurate methods in flow calibration, and also personal sampling flow rates should become mass flow controlled (with or without volumetric compensation for pressure and temperature changes). In the weighing laboratory the alternatives are climatic control (set temperature and relative humidity), and mechanically simpler thermostatic heating, air conditioning and dehumidification systems combined with numerical control of temperature, humidity and pressure effects on flow calibration and filter weighing.

High-speed imaging and small-scale explosive characterization techniques to understand effects of primary blast-induced injury on nerve cell structure and function

NASA Astrophysics Data System (ADS)

Piehler, T.; Banton, R.; Zander, N.; Duckworth, J.; Benjamin, R.; Sparks, R.

2018-01-01

Traumatic brain injury (TBI) is often associated with blast exposure. Even in the absence of penetrating injury or evidence of tissue injury on imaging, blast TBI may trigger a series of neural/glial cellular and functional changes. Unfortunately, the diagnosis and proper treatment of mild traumatic brain injury (mTBI) caused by explosive blast is challenging, as it is not easy to clinically distinguish blast from non-blast TBI on the basis of patient symptoms. Damage to brain tissue, cell, and subcellular structures continues to occur slowly and in a manner undetectable by conventional imaging techniques. The threshold shock impulse levels required to induce damage and the cumulative effects upon multiple exposures are not well characterized. Understanding how functional and structural damage from realistic blast impact at cellular and tissue levels at variable timescales after mTBI events may be vital for understanding this injury phenomenon and for linking mechanically induced structural changes with measurable effects on the nervous system. Our working hypothesis is that there is some transient physiological dysfunction occurring at cellular and subcellular levels within the central nervous system due to primary blast exposure. We have developed a novel in vitro indoor experimental system that uses real military explosive charges to more accurately represent military blast exposure and to probe the effects of primary explosive blast on dissociated neurons. We believe this system offers a controlled experimental method to analyze and characterize primary explosive blast-induced cellular injury and to understand threshold injury phenomenon. This paper will also focus on the modeling aspect of our work and how it relates to the experimental work.

The survival of micro-organisms in space. Further rocket and balloon-borne exposure experiments.

PubMed

Hotchin, J; Lorenz, P; Markusen, A; Hemenway, C

1967-01-01

This report describes the results of survival studies of terrestrial micro-organisms exposed directly to the space environment on two balloons and in two rocket flights. The work is part of a program to develop techniques for the collection of micro-organisms in the size range of micrometeorite particles in space or non-terrestrial atmospheres, and their return to earth in a viable state for further study. Previous survival studies were reported (J. Hotchin, P. Lorenz and C. Hemenway, Nature 206 (1965) 442) in which a few relatively large area samples of micro-organisms were exposed on millipore filter cemented to aluminum plates. In the present series of experiments, newly developed techniques have resulted in a 25-fold miniaturization resulting in a corresponding increase in the number of experiments performed. This has enabled a statistical evaluation of the results to be made. A total of 756 separate exposure units (each approximately 5 x 5 mm in size) were flown in four experiments, and organisms used were coliphage T1, penicillium roqueforti (THOM) mold spores, poliovirus type I (Pfizer attenuated Sabin vaccine strain), and bacillus subtilis spores. The organisms were deposited either by spraying directly upon the vinyl-coated metal units, or by droplet seeding into shallow depressions in the millipore filter membrane-coated units. Groups of units were prepared comprising fully exposed, inverted (screened by 2 mm of Al), and filter-protected organisms. All of these were included in the flight set, the back up set, and a laboratory control set. The altitude of the exposures varied from 35 km in the balloon experiments to 150 km in the rocket experiments. Times of exposures at altitude were approximately 6 hours for the balloon flights and about 3 minutes for the rocket experiments.

Evaluating the reliability of Late Quaternary landform ages: Integrating 10Be cosmogenic surface exposure dating with U-series dating of pedogenic carbonate on alluvial and fluvial deposits, Sonoran desert, California

NASA Astrophysics Data System (ADS)

Blisniuk, K.; Sharp, W. D.

2015-12-01

To assess the reliability of Quaternary age determinations of alluvial and fluvial deposits across the Sonoran Desert (Coachella Valley and Anza Borrego) in southern California, we applied both 10Be exposure age dating of surface clasts and U-series dating of pedogenic carbonate from subsurface clast-coatings to the same deposits. We consider agreement between dates from the two techniques to indicate reliable age estimates because each technique is subject to distinct assumptions and therefore their systematic uncertainties are largely independent. 10Be exposure dates should yield maximum ages when no correction is made for inheritance and post-depositional erosion is negligible. U-series dating, in contrast, provides minimum dates because pedogenic carbonate forms after deposition. Our results show that: (1) For deposits ca. 70 ka or younger, 10Be and U-series dates were generally concordant. We note, however, that in most cases U-series soil dates exceed 10Be exposure dates that are corrected for inheritance when using 10Be in modern alluvium. This suggests that 10Be concentrations of modern alluvium may exceed the 10Be acquired by late Pleistocene deposits during fluvial transport and hillslope residence (i.e., Pleistocene inherited 10Be). (2) For deposits older than ~70 ka, U-series dates are significantly younger than the 10Be dates. This implies that U-series dates in this region may significantly underestimate the depositional age of older alluvium, probably because of delayed onset of deposition, slow accumulation, or poor preservation of secondary carbonate in response to climatic controls. Thus, whenever possible, multiple dating methods should be applied to obtain reliable ages for late Quaternary deposits.

Single-session gamified virtual reality exposure therapy for spider phobia vs. traditional exposure therapy: study protocol for a randomized controlled non-inferiority trial.

PubMed

Miloff, Alexander; Lindner, Philip; Hamilton, William; Reuterskiöld, Lena; Andersson, Gerhard; Carlbring, Per

2016-02-02

Traditional one-session exposure therapy (OST) in which a patient is gradually exposed to feared stimuli for up to 3 h in a one-session format has been found effective for the treatment of specific phobias. However, many individuals with specific phobia are reluctant to seek help, and access to care is lacking due to logistic challenges of accessing, collecting, storing, and/or maintaining stimuli. Virtual reality (VR) exposure therapy may improve upon existing techniques by facilitating access, decreasing cost, and increasing acceptability and effectiveness. The aim of this study is to compare traditional OST with in vivo spiders and a human therapist with a newly developed single-session gamified VR exposure therapy application with modern VR hardware, virtual spiders, and a virtual therapist. Participants with specific phobia to spiders (N = 100) will be recruited from the general public, screened, and randomized to either VR exposure therapy (n = 50) or traditional OST (n = 50). A behavioral approach test using in vivo spiders will serve as the primary outcome measure. Secondary outcome measures will include spider phobia questionnaires and self-reported anxiety, depression, and quality of life. Outcomes will be assessed using a non-inferiority design at baseline and at 1, 12, and 52 weeks after treatment. VR exposure therapy has previously been evaluated as a treatment for specific phobias, but there has been a lack of high-quality randomized controlled trials. A new generation of modern, consumer-ready VR devices is being released that are advancing existing technology and have the potential to improve clinical availability and treatment effectiveness. The VR medium is also particularly suitable for taking advantage of recent phobia treatment research emphasizing engagement and new learning, as opposed to physiological habituation. This study compares a market-ready, gamified VR spider phobia exposure application, delivered using consumer VR hardware, with the current gold standard treatment. Implications are discussed. ClinicalTrials.gov identifier NCT02533310. Registered on 25 August 2015.

Low Earth orbit atomic oxygen simulation for durability evaluation of solar reflector surfaces

NASA Technical Reports Server (NTRS)

Degroh, Kim K.; Banks, Bruce A.

1992-01-01

To evaluate the performance and durability of solar reflector surfaces in the atomic oxygen environment typical of low Earth orbit (LEO), one must expose the reflector surface either directly to LEO or to ground-laboratory atomic oxygen environments. Although actual LEO exposures are most desired, such opportunities are typically scarce, expensive, and of limited duration. As a result, ground-laboratory exposures must be relied upon as the most practical long-term durability evaluation technique. Plasma ashers are widely used as LEO simulation facilities by producing atomic oxygen environments for durability evaluation of potential spacecraft materials. Atomic oxygen arrival differs between ground and space exposure in that plasma asher exposure produces isotropic arrival and space solar tracking produces sweeping arrival. Differences in initial impact reaction probability occur, dependent upon the energy and species existing in these environments. Due to the variations in ground-laboratory and space atomic oxygen, quantification of in-space performance based on plasma asher testing is not straightforward. The various atomic oxygen interactions that can occur with reflector surfaces, such as undercutting in organic substrates at protective coating defect sites, ground-laboratory techniques recommended for evaluating the atomic oxygen durability of reflectors based on asher exposures, and computational techniques which make use of ground-laboratory atomic oxygen exposure to predict in-space LEO durability are addressed.

Strategies for Establishing a Rearing Technique for the Fruit Fly Parasitoid: Doryctobracon brasiliensis (Hymenoptera: Braconidae).

PubMed

Poncio, S; Nunes, A M; Gonçalves, R D S; Lisboa, H; Manica-Berto, R; Garcia, M S; Nava, D E

2018-05-28

Anastrepha fraterculus (Wiedemann) (Diptera: Tephritidae) is the most important pest in South American orchards. When control measures are not adopted, this pest can cause losses of up to 100%. Doryctobracon brasiliensis (Szépligeti) (Hymenoptera: Braconidae) is a larval-pupal endoparasitoid that can be used as a native biological control agent against A. fraterculus. This study aimed to develop a rearing technique for D. brasiliensis in larvae of A. fraterculus. Trials were carried out to: 1) determine the optimal instar for parasitism, 2) define the exposure time of larvae to parasitoids, 3) determine the density requirements of A. fraterculus larvae offered to each parasitoid, and 4) evaluate the effect of diet on adults of D. brasiliensis. In all trials, we evaluated the number of offspring, parasitism rate, and sex ratio. Moreover, in the experiment to investigate the effects of diet, we determined the longevity of males and females. In both choice and nonchoice parasitism tests, the parasitoids preferred third-instar larvae of A. fraterculus over second- and first-instar larvae. An exposure time of 12 h of A. fraterculus larvae produced larger numbers of parasitoids and higher parasitism rates. The density of 15 larvae of A. fraterculus to each female of D. brasiliensis produced a larger number of offspring. A supply of honey solution (20 and 50%) to the parasitoids yielded the highest number offspring and resulted in greater longevity. Our findings can be used to support the development of a mass rearing protocol for D. brasiliensis.

A study of DNA damage in buccal cells of consumers of well- and/or tap-water using the comet assay: Assessment of occupational exposure to genotoxicants.

PubMed

Vazquez Boucard, Celia; Lee-Cruz, Larisa; Mercier, Laurence; Ramírez Orozco, Martín; Serrano Pinto, Vania; Anguiano, Gerardo; Cazares, Linette; Díaz, Daniel

2017-10-01

Because of concerns that natural aquifers in the region of Todos Santos (Baja California Sur, Mexico) might be contaminated by organochlorine pesticides and heavy metals, a case-control study was conducted among consumers and non-consumers of well- and/or tap-water to determine risks to human health. This study was based on a genotoxic evaluation of buccal cells using the Comet assay technique. Levels of DNA damage in the consumers group were significantly higher than those of the control group. However, occupational exposure to genotoxicants showed to be the critical factor rather than water consumption. Taking into account the professions of well- and/or tap-water consumers, agricultural workers exposed directly (those who fumigated) or indirectly (those not involved in fumigating) to agrochemicals showed greater genetic damage than controls. This difference persisted even when age, and whether the person smoked or consumed alcoholic drinks were considered. These factors were not associated with the level of genetic damage observed. Chemical analyses of organochlorine pesticides and heavy metals were carried out to evaluate the water quality of wells, faucets, and surface water of canals consumed by the population and/or used for irrigation. High concentrations of α and β endosulfan were detected in water of surface canals. Although our inventory of agrochemicals employed in the region showed the use of products considered carcinogenic and/or mutagenic, they were not detected by the analytical techniques used. Heavy metals (arsenic, mercury, and lead) were detected in water of some wells used for irrigation and human consumption. Environ. Mol. Mutagen. 58:619-627, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paul, I.R.

A pilot study in two states led to the establishment of the Dental Exposure Normalization Technique (DENT) program. This, in brief, is an exposure reduction and quality assurance program for radiological health agencies. The health agency sends X-ray exposure cards to dental X-ray facilities. These are exposed by the dentist and returned for analysis. Facilities which show excessive exposure are then visited to demonstrate the changes in exposure and processing necessary to produce diagnostic quality radiographs with minimum patient exposure.

The effect of exposure to missile attacks on posttraumatic stress disorder symptoms as a function of perceived media control and locus of control.

PubMed

Hoffman, Yaakov S G; Shrira, Amit; Cohen-Fridel, Sara; Grossman, Ephraim S; Bodner, Ehud

2016-10-30

Exposure is one of the most robust predictors of post-traumatic stress disorder (PTSD) symptoms in warfare situations. Yet, while many are sensitive to exposure, others do not develop PTSD. In the current study, we address how perceived media control along with external locus of control moderate effects of exposure on PTSD symptoms among 1268 individuals exposed to missile attacks (mean age=36.97). We expected that the coupling of low perceived media control, whereby one feels poor control over media consumption (an inability to stop), especially when irrelevant and non-informative (e.g., involuntarily viewing the same terror incident shown repeatedly in a looped fashion) along with a self-perception of external locus of control, will render participants highly vulnerable to exposure. As expected, results suggest that effects of exposure on PTSD are not automatic, rather, the coupling of both low media control along with believing that life event are controlled by external factors exacerbates effects of exposure. These findings bear practical implications, as both media control and locus of control can be modified by therapeutic interventions, rendering one less vulnerable to the detrimental effects of traumatic exposure. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

USE OF EXHALED BREATH CONDENSATE IN A HUMAN EXPOSURE STUDY

EPA Science Inventory

Exhaled breath condensate (EBC) is a noninvasive, repeatable collection technique to sample biomarkers of lung inflammation, oxidative stress, and environmental exposure. It is unclear whether EBC is an effective tool in human environmental exposure studies with multi-day samplin...

Medical countermeasure against respiratory toxicity and acute lung injury following inhalation exposure to chemical warfare nerve agent VX

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nambiar, Madhusoodana P.; Gordon, Richard K.; Rezk, Peter E.

2007-03-15

To develop therapeutics against lung injury and respiratory toxicity following nerve agent VX exposure, we evaluated the protective efficacy of a number of potential pulmonary therapeutics. Guinea pigs were exposed to 27.03 mg/m{sup 3} of VX or saline using a microinstillation inhalation exposure technique for 4 min and then the toxicity was assessed. Exposure to this dose of VX resulted in a 24-h survival rate of 52%. There was a significant increase in bronchoalveolar lavage (BAL) protein, total cell number, and cell death. Surprisingly, direct pulmonary treatment with surfactant, liquivent, N-acetylcysteine, dexamethasone, or anti-sense syk oligonucleotides 2 min post-exposure didmore » not significantly increase the survival rate of VX-exposed guinea pigs. Further blocking the nostrils, airway, and bronchioles, VX-induced viscous mucous secretions were exacerbated by these aerosolized treatments. To overcome these events, we developed a strategy to protect the animals by treatment with atropine. Atropine inhibits muscarinic stimulation and markedly reduces the copious airway secretion following nerve agent exposure. Indeed, post-exposure treatment with atropine methyl bromide, which does not cross the blood-brain barrier, resulted in 100% survival of VX-exposed animals. Bronchoalveolar lavage from VX-exposed and atropine-treated animals exhibited lower protein levels, cell number, and cell death compared to VX-exposed controls, indicating less lung injury. When pulmonary therapeutics were combined with atropine, significant protection to VX-exposure was observed. These results indicate that combinations of pulmonary therapeutics with atropine or drugs that inhibit mucous secretion are important for the treatment of respiratory toxicity and lung injury following VX exposure.« less

Acute respiratory toxicity following inhalation exposure to soman in guinea pigs.

PubMed

Perkins, Michael W; Pierre, Zdenka; Rezk, Peter; Sabnekar, Praveena; Kabra, Kareem; Chanda, Soma; Oguntayo, Samuel; Sciuto, Alfred M; Doctor, Bhupendra P; Nambiar, Madhusoodana P

2010-06-01

Respiratory toxicity and lung injury following inhalation exposure to chemical warfare nerve agent soman was examined in guinea pigs without therapeutics to improve survival. A microinstillation inhalation exposure technique that aerosolizes the agent in the trachea was used to administer soman to anesthetized age and weight matched male guinea pigs. Animals were exposed to 280, 561, 841, and 1121 mg/m(3) concentrations of soman for 4 min. Survival data showed that all saline controls and animals exposed to 280 and 561 mg/m(3) soman survived, while animals exposed to 841, and 1121 mg/m(3) resulted in 38% and 13% survival, respectively. The microinstillation inhalation exposure LCt(50) for soman determined by probit analysis was 827.2mg/m(3). A majority of the animals that died at 1121 mg/m(3) developed seizures and died within 15-30 min post-exposure. There was a dose-dependent decrease in pulse rate and blood oxygen saturation of animals exposed to soman at 5-6.5 min post-exposure. Body weight loss increased with the dose of soman exposure. Bronchoalveolar lavage (BAL) fluid and blood acetylcholinesterase and butyrylcholinesterase activity was inhibited dose-dependently in soman treated groups at 24h. BAL cells showed a dose-dependent increase in cell death and total cell counts following soman exposure. Edema by wet/dry weight ratio of the accessory lung lobe and trachea was increased slightly in soman exposed animals. An increase in total bronchoalveolar lavage fluid protein was observed in soman exposed animals at all doses. Differential cell counts of BAL and blood showed an increase in total lymphocyte counts and percentage of neutrophils. These results indicate that microinstillation inhalation exposure to soman causes respiratory toxicity and acute lung injury in guinea pigs. (c) 2010 Elsevier Inc. All rights reserved.

Advanced plasma etch technologies for nanopatterning

NASA Astrophysics Data System (ADS)

Wise, Rich

2013-10-01

Advances in patterning techniques have enabled the extension of immersion lithography from 65/45 nm through 14/10 nm device technologies. A key to this increase in patterning capability has been innovation in the subsequent dry plasma etch processing steps. Multiple exposure techniques, such as litho-etch-litho-etch, sidewall image transfer, line/cut mask, and self-aligned structures, have been implemented to solution required device scaling. Advances in dry plasma etch process control across wafer uniformity and etch selectivity to both masking materials have enabled adoption of vertical devices and thin film scaling for increased device performance at a given pitch. Plasma etch processes, such as trilayer etches, aggressive critical dimension shrink techniques, and the extension of resist trim processes, have increased the attainable device dimensions at a given imaging capability. Precise control of the plasma etch parameters affecting across-design variation, defectivity, profile stability within wafer, within lot, and across tools has been successfully implemented to provide manufacturable patterning technology solutions. IBM has addressed these patterning challenges through an integrated total patterning solutions team to provide seamless and synergistic patterning processes to device and integration internal customers. We will discuss these challenges and the innovative plasma etch solutions pioneered by IBM and our alliance partners.

Advanced plasma etch technologies for nanopatterning

NASA Astrophysics Data System (ADS)

Wise, Rich

2012-03-01

Advances in patterning techniques have enabled the extension of immersion lithography from 65/45nm through 14/10nm device technologies. A key to this increase in patterning capability has been innovation in the subsequent dry plasma etch processing steps. Multiple exposure techniques such as litho-etch-litho-etch, sidewall image transfer, line/cut mask and self-aligned structures have been implemented to solution required device scaling. Advances in dry plasma etch process control, across wafer uniformity and etch selectivity to both masking materials and have enabled adoption of vertical devices and thin film scaling for increased device performance at a given pitch. Plasma etch processes such as trilayer etches, aggressive CD shrink techniques, and the extension of resist trim processes have increased the attainable device dimensions at a given imaging capability. Precise control of the plasma etch parameters affecting across design variation, defectivity, profile stability within wafer, within lot, and across tools have been successfully implemented to provide manufacturable patterning technology solutions. IBM has addressed these patterning challenges through an integrated Total Patterning Solutions team to provide seamless and synergistic patterning processes to device and integration internal customers. This paper will discuss these challenges and the innovative plasma etch solutions pioneered by IBM and our alliance partners.

Survival of shovelnose sturgeon after abdominally invasive endoscopic evaluation

USGS Publications Warehouse

Trested, D.G.; Goforth, Reuben R.; Kirk, J.P.; Isely, J.J.

2010-01-01

The development of effective and minimally invasive techniques to determine gender and gonad developmental stage is particularly important in performing accurate fisheries assessments for use in conservation and restoration. The initial and latent survival of shovelnose sturgeon Scaphirhynchus platorynchus was assessed after exposure to a modified endoscopic technique designed to collect that biological information. Rather than inserting the endoscope through the urogenital canal or directly into the body cavity, we inserted a threaded trocar through a ventral incision and used a low-pressure air supply attached to the trocar to gently insufflate the body cavity. The initial survival of both experimental and control shovelnose sturgeon was 100%. Latent survival was 100% and 90% for the experimental and control fish, respectively. Our study suggests that incision endoscopy coupled with insufflation of the body cavity through the use of a trocar and an air supply is a safe and effective way to determine gender and examine the gonad developmental stage of shovelnose sturgeon. The short duration of the procedure and the high postprocedure survival suggest that this technique is suitable for shovelnose sturgeon and perhaps for the evaluation of other endangered fish species (e.g., pallid sturgeon S. alba) as well.

Behavioral Activation and Therapeutic Exposure: An Investigation of Relative Symptom Changes in PTSD and Depression during the Course of Integrated Behavioral Activation, Situational Exposure, and Imaginal Exposure Techniques

ERIC Educational Resources Information Center

Gros, Daniel F.; Price, Matthew; Strachan, Martha; Yuen, Erica K.; Milanak, Melissa E.; Acierno, Ron

2012-01-01

Effectiveness of exposure therapy for posttraumatic stress disorder (PTSD) may be adversely influenced by comorbid disorders. The present study investigated behavioral activation and therapeutic exposure (BA-TE), a new integrated treatment designed specifically for comorbid symptoms of PTSD and depression. Combat veterans with PTSD (N = 117)…

Road traffic air and noise pollution exposure assessment - A review of tools and techniques.

PubMed

Khan, Jibran; Ketzel, Matthias; Kakosimos, Konstantinos; Sørensen, Mette; Jensen, Steen Solvang

2018-09-01

Road traffic induces air and noise pollution in urban environments having negative impacts on human health. Thus, estimating exposure to road traffic air and noise pollution (hereafter, air and noise pollution) is important in order to improve the understanding of human health outcomes in epidemiological studies. The aims of this review are (i) to summarize current practices of modelling and exposure assessment techniques for road traffic air and noise pollution (ii) to highlight the potential of existing tools and techniques for their combined exposure assessment for air and noise together with associated challenges, research gaps and priorities. The study reviews literature about air and noise pollution from urban road traffic, including other relevant characteristics such as the employed dispersion models, Geographic Information System (GIS)-based tool, spatial scale of exposure assessment, study location, sample size, type of traffic data and building geometry information. Deterministic modelling is the most frequently used assessment technique for both air and noise pollution of short-term and long-term exposure. We observed a larger variety among air pollution models as compared to the applied noise models. Correlations between air and noise pollution vary significantly (0.05-0.74) and are affected by several parameters such as traffic attributes, building attributes and meteorology etc. Buildings act as screens for the dispersion of pollution, but the reduction effect is much larger for noise than for air pollution. While, meteorology has a greater influence on air pollution levels as compared to noise, although also important for noise pollution. There is a significant potential for developing a standard tool to assess combined exposure of traffic related air and noise pollution to facilitate health related studies. GIS, due to its geographic nature, is well established and has a significant capability to simultaneously address both exposures. Copyright © 2018 Elsevier B.V. All rights reserved.

Guidance on individual monitoring programmes for radioisotopic techniques in molecular and cellular biology.

PubMed

Macías, M T; Navarro, T; Lavara, A; Robredo, L M; Sierra, I; Lopez, M A

2003-01-01

The radioisotope techniques used in molecular and cellular biology involve external and internal irradiation risk. The personal dosemeter may be a reasonable indicator for external irradiation. However, it is necessary to control the possible internal contamination associated with the development of these techniques. The aim of this project is to analyse the most usual techniques and to establish programmes of internal monitoring for specific radionuclides (32P, 35S, 14C, 3H, 125I and 131I). To elaborate these programmes it was necessary to analyse the radioisotope techniques. Two models have been applied (NRPB and IAEA) to the more significant techniques, according to the physical and chemical nature of the radionuclides, their potential importance in occupational exposure and the possible injury to the genetic material of the cell. The results allowed the identification of the techniques with possible risk of internal contamination. It was necessary to identify groups of workers that require individual monitoring. The risk groups have been established among the professionals exposed, according to different parameters: the general characteristics of receptor, the radionuclides used (the same user can work with one, two or three radionuclides at the same time) and the results of the models applied. Also a control group was established. The study of possible intakes in these groups has been made by urinalysis and whole-body counter. The theoretical results are coherent with the experimental results. They have allowed guidance to individual monitoring to be proposed. Basically, the document shows: (1) the analysis of the radiosotopic techniques, taking into account the special containment equipment; (2) the establishment of the need of individual monitoring; and (3) the required frequency of measurements in a routine programme.

Strategies for Controlling Item Exposure in Computerized Adaptive Testing with the Generalized Partial Credit Model

ERIC Educational Resources Information Center

Davis, Laurie Laughlin

2004-01-01

Choosing a strategy for controlling item exposure has become an integral part of test development for computerized adaptive testing (CAT). This study investigated the performance of six procedures for controlling item exposure in a series of simulated CATs under the generalized partial credit model. In addition to a no-exposure control baseline…

Comparison of prometaphase chromosome techniques with emphasis on the role of colcemid.

PubMed

Wiley, J E; Sargent, L M; Inhorn, S L; Meisner, L F

1984-12-01

Six different techniques were evaluated to define better those technical factors that are most critical for obtaining prometaphase cells for banding analysis. Our results demonstrate: colcemid exposures of 30 min or less have no effect on increasing the yield of prometaphase cells, colcemid exposures of greater than 0.1 microgram/ml can be toxic, methotrexate depresses the mitotic index significantly and seems to increase the incidence of prometaphase cells only because it suppresses later forms; and (d) the optimum number of cytogenetically satisfactory prometaphase cells can be obtained with a 4-h exposure to a combination of low concentration actinomycin D (0.5 microgram/ml) and colcemid (0.1 microgram/ml). This technique inhibits chromosome condensation while permitting prometaphase cells to accumulate for 4 h.

Materials screening chamber for testing materials resistance to atomic oxygen

NASA Technical Reports Server (NTRS)

Pippin, H. G.; Carruth, Ralph

1989-01-01

A unique test chamber for exposing material to a known flux of oxygen atoms is described. The capabilities and operating parameters of the apparatus include production of an oxygen atom flux in excess of 5 x 10 to the 16th atoms/sq cm-sec, controlled heating of the sample specimen, RF circuitry to contain the plasma within a small volume, and long exposure times. Flux measurement capabilities include a calorimetric probe and a light titration system. Accuracy and limitations of these techniques are discussed. An extension to the main chamber to allow simultaneous ultraviolet and atomic oxygen exposure is discussed. The oxygen atoms produced are at thermal energies. Sample specimens are maintained at any selected temperature between ambient and 200 C, to within + or - 2 C. A representative example of measurements made using the chamber is presented.

Capillary plasma jet: A low volume plasma source for life science applications

NASA Astrophysics Data System (ADS)

Topala, I.; Nagatsu, M.

2015-02-01

In this letter, we present results from multispectroscopic analysis of protein films, after exposure to a peculiar plasma source, i.e., the capillary plasma jet. This plasma source is able to generate very small pulsed plasma volumes, in kilohertz range, with characteristic dimensions smaller than 1 mm. This leads to specific microscale generation and transport of all plasma species. Plasma diagnosis was realized using general electrical and optical methods. Depending on power level and exposure duration, this miniature plasma jet can induce controllable modifications to soft matter targets. Detailed discussions on protein film oxidation and chemical etching are supported by results from absorption, X-ray photoelectron spectroscopy, and microscopy techniques. Further exploitation of principles presented here may consolidate research interests involving plasmas in biotechnologies and plasma medicine, especially in patterning technologies, modified biomolecule arrays, and local chemical functionalization.

Aldehyde disinfectants and health in endoscopy units. British Society of Gastroenterology Endoscopy Committee.

PubMed

Cowan, R E; Manning, A P; Ayliffe, G A; Axon, A T; Causton, J S; Cripps, N F; Hall, R; Hanson, P J; Harrison, J; Leicester, R J

1993-11-01

Summary of main recommendations(1) Glutaraldehyde, used in most endoscopy units in the United Kingdom for the disinfection of flexible gastrointestinal endoscopes, is a toxic substance being an irritant and a sensitiser; symptoms associated with glutaraldehyde exposure are common among staff working in endoscopy units.(2) The Control of Substances Hazardous to Health Regulations 1988 (COSHH) obliges the employer to make a systematic assessment of risk to staff of exposure to glutaraldehyde and institute measures to deal effectively with exposure.(3) At present glutaraldehyde remains the first line agent for the disinfection of flexible gastrointestinal endoscopes. Other agents are being developed; a standard means of assessment for flexible endoscope disinfectants should be devised.(4) Equipment and accessories that are heat stable should be sterilised by autoclaving; disposable accessories should be used wherever possible.(5) Flexible gastrointestinal endoscopes should be disinfected within automated washer/disinfectors; trays, bowls or buckets for this purpose are unacceptable.(6) Local exhaust ventilation must be used to control glutaraldehyde vapour. Extracted air may be discharged direct to the atmosphere or passed over special absorbent filters and recirculated. Such control measures must be regularly tested and records retained.(7) Endoscope cleaning and disinfection should be carried out in a room dedicated to the purpose, equipped with control measures to maintain the concentration of glutaraldehyde vapour at a level certainly below the current occupational exposure standard of 0.2 ppm and preferably below the commonly used working limit of 0.1 ppm. Sites other than the endoscopy unit where endoscopy is regularly performed, such as the radiology department, should have their own fully equipped cleaning and disinfection room.(8) COSHH limits the use of personal protective equipment to those situations where other measures cannot adequately control exposure. Such equipment includes nitrile rubber gloves, apron, chemical grade eye protection, and respiratory protective equipment for organic vapours.(9) Monitoring of atmospheric levels of glutaraldehyde should be performed by a competent person such as an occupational hygienist; the currently preferred method of sampling uses a filtration technique, the commercially available meters being less reliable.(10) Health surveillance of staff is mandatory; occupational health records must be retained for 30 years.(11) Endoscopy staff must be informed of the risks of exposure to glutaraldehyde and trained in safe methods of its control. Only staff who have completed such an education and training programme should be allowed to disinfect endoscopes.(12) The unsafe use of glutaraldehyde has significant health and legal consequences; the safe use of glutaraldehyde may have revenue consequences that contribute significantly to the cost of gastrointestinal endoscopy.

Attenuation and image noise level based online z-axis tube current modulation for CT scans independent with localizer radiograph: simulation study and results

NASA Astrophysics Data System (ADS)

Tian, Yi; Chen, Mahao; Kong, Jun

2009-02-01

With the online z-axis tube current modulation (OZTCM) technique proposed by this work, full automatic exposure control (AEC) for CT systems could be realized with online feedback not only for angular tube current modulation (TCM) but also for z-axis TCM either. Then the localizer radiograph was not required for TCM any more. OZTCM could be implemented with 2 schemes as attenuation based μ-OZTCM and image noise level based μ-OZTCM. Respectively the maximum attenuation of projection readings and standard deviation of reconstructed images can be used to modulate the tube current level in z-axis adaptively for each half (180 degree) or full (360 degree) rotation. Simulation results showed that OZTCM achieved better noise level than constant tube current scan case by using same total dose in mAs. The OZTCM can provide optimized base tube current level for angular TCM to realize an effective auto exposure control when localizer radiograph is not available or need to be skipped for simplified scan protocol in case of emergency procedure or children scan, etc.

Effects of Exposure to Welding Fume on Lung Function: Results from the German WELDOX Study.

PubMed

Lehnert, M; Hoffmeyer, F; Gawrych, K; Lotz, A; Heinze, E; Berresheim, H; Merget, R; Harth, V; Van Gelder, R; Hahn, J-U; Hartwig, A; Weiß, T; Pesch, B; Brüning, T

2015-01-01

The association between exposure to welding fume and chronic obstructive pulmonary disease (COPD) has been insufficiently clarified. In this study we assessed the influence of exposure to welding fume on lung function parameters. We investigated forced expiratory volume in 1 s (FEV1), forced vital capacity (FVC), FEV1/FVC, and expiratory flow rates in 219 welders. We measured current exposure to respirable particles and estimated a worker's lifetime exposure considering welding techniques, working conditions and protective measures at current and former workplaces. Multiple regression models were applied to estimate the influence of exposure to welding fume, age, and smoking on lung function. We additionally investigated the duration of working as a welder and the predominant welding technique. The findings were that age- and smoking-adjusted lung function parameters showed no decline with increasing duration, current exposure level, and lifetime exposure to welding fume. However, 15% of the welders had FEV1/FVC below the lower limit of normal, but we could not substantiate the presence of an association with the measures of exposure. Adverse effects of cigarette smoking were confirmed. In conclusion, the study did not support the notion of a possible detrimental effect of exposure to welding fume on lung function in welders.

Swimmer illness associated with marine water exposure and water quality indicators: impact of widely used assumptions

EPA Science Inventory

Studies of health risks associated with recreational water exposure require investigators to make choices about water quality indicator averaging techniques, exposure definitions, follow-up periods, and model specifications; but, investigators seldom describe the impact of these ...

Digital Compositing Techniques for Coronal Imaging (Invited review)

NASA Astrophysics Data System (ADS)

Espenak, F.

2000-04-01

The solar corona exhibits a huge range in brightness which cannot be captured in any single photographic exposure. Short exposures show the bright inner corona and prominences, while long exposures reveal faint details in equatorial streamers and polar brushes. For many years, radial gradient filters and other analog techniques have been used to compress the corona's dynamic range in order to study its morphology. Such techniques demand perfect pointing and tracking during the eclipse, and can be difficult to calibrate. In the past decade, the speed, memory and hard disk capacity of personal computers have rapidly increased as prices continue to drop. It is now possible to perform sophisticated image processing of eclipse photographs on commercially available CPU's. Software programs such as Adobe Photoshop permit combining multiple eclipse photographs into a composite image which compresses the corona's dynamic range and can reveal subtle features and structures. Algorithms and digital techniques used for processing 1998 eclipse photographs will be discussed which are equally applicable to the recent eclipse of 1999 August 11.

Impact of aggregating exposure information from cases and controls when building a population-based job-exposure matrix from past expert evaluations.

PubMed

Kirkham, Tracy L; Siemiatycki, Jack; Labrèche, France; Lavoué, Jérôme

2016-07-01

To assess whether the inclusion of data from cases would bias a job-exposure matrix (JEM), we evaluated whether exposures were systematically different between cases and controls from a large historical case-control study. Data included 10 381 jobs assessed for occupational exposure to 294 agents within a lung cancer case-control study. For each sex, 1 JEM was developed from case jobs, and 1 from control jobs: with occupation (four-digit occupational codes), time period (1945-1959, 1960-1984, 1985-1995) and agent axes. We estimated concordance in exposure status (defined as probability of exposure threshold ≥5%) and exposure metrics of probability and intensity of exposure, between the 2 JEMs. Of all hypothetical occupation-period-agent combinations, most had no or few observations. Among males there were 8136 common cells (24-occupational codes, 3-periods, 226-agents), containing sufficient observations for comparison with 92% concordance in exposure status; discordance was equally likely to be towards cases or controls. Females had 1710 common cells (9-occupational codes, 3-periods, 114-agents) with 93% concordance in exposure status; discordant cells were more likely to reflect greater exposure among cases. Among concordantly exposed cells, probability and intensity of exposures were highly correlated between the case JEM and control JEM (Kendall τ>0.50), and absolute differences were small (median difference in probability <1.5%, median ratio in intensity=1.00) for both sexes. Agreement between the case JEM and control JEM was high, suggesting that aggregating the case and control information in our study into a single JEM is justifiable given the benefits of increased sample size. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Exposure to crystalline silica at Alberta work sites: review of controls.

PubMed

Radnoff, Diane; Todor, Maria S; Beach, Jeremy

2015-01-01

From 2009 to 2013, Alberta Jobs, Skills, Training, and Labour (JSTL) conducted a project to evaluate exposure to crystalline silica and assess controls to protect workers. Information on exposure results has been previously reported; this article discusses the data collected on workplace controls. Information on work site controls was collected during exposure assessments consisting of qualitative information on controls in place and used by workers at the time of the assessments. Where there was sufficient data, the information was further analyzed to evaluate the impact of a particular control. While many types of controls were observed, they were not always effective or in use. The control available most often was respiratory protective equipment (RPE). Generally, when respirators were used, they were correctly selected for the level of measured exposure. However, not all workers who were potentially overexposed wore respirators at the time of the assessments. When the use of respirators was taken into account, about one-third of workers were still potentially exposed over the Alberta occupational exposure limit. The industries with the highest levels of exposure tended to be those with the most unprotected workers. Issues were identified with the use of improper work practices such as dry cleaning methods, lack of documented work procedures, poor housekeeping, and lack of training which may have contributed to worker exposure levels. There is a wide range in the efficacy of controls, particularly engineering controls. Most of the literature focuses on engineering controls; however administrative controls also play a role in reducing worker exposure. Data collected in this work indicated that simple changes to work procedures and behavior (such as improved housekeeping) may be effective, low-cost ways to reduce workplace exposure. More study is required to evaluate the impact and efficacy of administrative controls such as housekeeping and training. Employers must select and evaluate controls in the context of overall workplace health and safety programs and ensure that they are supported by supervision, good work practices. and training.

NIAID, NIEHS, NHLBI, and MCAN Workshop Report: The indoor environment and childhood asthma-implications for home environmental intervention in asthma prevention and management.

PubMed

Gold, Diane R; Adamkiewicz, Gary; Arshad, Syed Hasan; Celedón, Juan C; Chapman, Martin D; Chew, Ginger L; Cook, Donald N; Custovic, Adnan; Gehring, Ulrike; Gern, James E; Johnson, Christine C; Kennedy, Suzanne; Koutrakis, Petros; Leaderer, Brian; Mitchell, Herman; Litonjua, Augusto A; Mueller, Geoffrey A; O'Connor, George T; Ownby, Dennis; Phipatanakul, Wanda; Persky, Victoria; Perzanowski, Matthew S; Ramsey, Clare D; Salo, Päivi M; Schwaninger, Julie M; Sordillo, Joanne E; Spira, Avrum; Suglia, Shakira F; Togias, Alkis; Zeldin, Darryl C; Matsui, Elizabeth C

2017-10-01

Environmental exposures have been recognized as critical in the initiation and exacerbation of asthma, one of the most common chronic childhood diseases. The National Institute of Allergy and Infectious Diseases; National Institute of Environmental Health Sciences; National Heart, Lung, and Blood Institute; and Merck Childhood Asthma Network sponsored a joint workshop to discuss the current state of science with respect to the indoor environment and its effects on the development and morbidity of childhood asthma. The workshop included US and international experts with backgrounds in allergy/allergens, immunology, asthma, environmental health, environmental exposures and pollutants, epidemiology, public health, and bioinformatics. Workshop participants provided new insights into the biologic properties of indoor exposures, indoor exposure assessment, and exposure reduction techniques. This informed a primary focus of the workshop: to critically review trials and research relevant to the prevention or control of asthma through environmental intervention. The participants identified important limitations and gaps in scientific methodologies and knowledge and proposed and prioritized areas for future research. The group reviewed socioeconomic and structural challenges to changing environmental exposure and offered recommendations for creative study design to overcome these challenges in trials to improve asthma management. The recommendations of this workshop can serve as guidance for future research in the study of the indoor environment and on environmental interventions as they pertain to the prevention and management of asthma and airway allergies. Published by Elsevier Inc.

A geographical information system-based analysis of cancer mortality and population exposure to coal mining activities in West Virginia, United States of America.

PubMed

Hendryx, Michael; Fedorko, Evan; Anesetti-Rothermel, Andrew

2010-05-01

Cancer incidence and mortality rates are high in West Virginia compared to the rest of the United States of America. Previous research has suggested that exposure to activities of the coal mining industry may contribute to elevated cancer mortality, although exposure measures have been limited. This study tests alternative specifications of exposure to mining activity to determine whether a measure based on location of mines, processing plants, coal slurry impoundments and underground slurry injection sites relative to population levels is superior to a previously-reported measure of exposure based on tons mined at the county level, in the prediction of age-adjusted cancer mortality rates. To this end, we utilize two geographical information system (GIS) techniques--exploratory spatial data analysis and inverse distance mapping--to construct new statistical analyses. Total, respiratory and "other" age-adjusted cancer mortality rates in West Virginia were found to be more highly associated with the GIS-exposure measure than the tonnage measure, before and after statistical control for smoking rates. The superior performance of the GIS measure, based on where people in the state live relative to mining activity, suggests that activities of the industry contribute to cancer mortality. Further confirmation of observed phenomena is necessary with person-level studies, but the results add to the body of evidence that coal mining poses environmental risks to population health in West Virginia.

Meeting Report: Atmospheric Pollution and Human Reproduction

PubMed Central

Slama, Rémy; Darrow, Lyndsey; Parker, Jennifer; Woodruff, Tracey J.; Strickland, Matthew; Nieuwenhuijsen, Mark; Glinianaia, Svetlana; Hoggatt, Katherine J.; Kannan, Srimathi; Hurley, Fintan; Kalinka, Jaroslaw; Šrám, Radim; Brauer, Michael; Wilhelm, Michelle; Heinrich, Joachim; Ritz, Beate

2008-01-01

Background There is a growing body of epidemiologic literature reporting associations between atmospheric pollutants and reproductive outcomes, particularly birth weight and gestational duration. Objectives The objectives of our international workshop were to discuss the current evidence, to identify the strengths and weaknesses of published epidemiologic studies, and to suggest future directions for research. Discussion Participants identified promising exposure assessment tools, including exposure models with fine spatial and temporal resolution that take into account time–activity patterns. More knowledge on factors correlated with exposure to air pollution, such as other environmental pollutants with similar temporal variations, and assessment of nutritional factors possibly influencing birth outcomes would help evaluate importance of residual confounding. Participants proposed a list of points to report in future publications on this topic to facilitate research syntheses. Nested case–control studies analyzed using two-phase statistical techniques and development of cohorts with extensive information on pregnancy behaviors and biological samples are promising study designs. Issues related to the identification of critical exposure windows and potential biological mechanisms through which air pollutants may lead to intrauterine growth restriction and premature birth were reviewed. Conclusions To make progress, this research field needs input from toxicology, exposure assessment, and clinical research, especially to aid in the identification and exposure assessment of feto-toxic agents in ambient air, in the development of early markers of adverse reproductive outcomes, and of relevant biological pathways. In particular, additional research using animal models would help better delineate the biological mechanisms underpinning the associations reported in human studies. PMID:18560536

Meeting report: atmospheric pollution and human reproduction.

PubMed

Slama, Rémy; Darrow, Lyndsey; Parker, Jennifer; Woodruff, Tracey J; Strickland, Matthew; Nieuwenhuijsen, Mark; Glinianaia, Svetlana; Hoggatt, Katherine J; Kannan, Srimathi; Hurley, Fintan; Kalinka, Jaroslaw; Srám, Radim; Brauer, Michael; Wilhelm, Michelle; Heinrich, Joachim; Ritz, Beate

2008-06-01

There is a growing body of epidemiologic literature reporting associations between atmospheric pollutants and reproductive outcomes, particularly birth weight and gestational duration. The objectives of our international workshop were to discuss the current evidence, to identify the strengths and weaknesses of published epidemiologic studies, and to suggest future directions for research. Participants identified promising exposure assessment tools, including exposure models with fine spatial and temporal resolution that take into account time-activity patterns. More knowledge on factors correlated with exposure to air pollution, such as other environmental pollutants with similar temporal variations, and assessment of nutritional factors possibly influencing birth outcomes would help evaluate importance of residual confounding. Participants proposed a list of points to report in future publications on this topic to facilitate research syntheses. Nested case-control studies analyzed using two-phase statistical techniques and development of cohorts with extensive information on pregnancy behaviors and biological samples are promising study designs. Issues related to the identification of critical exposure windows and potential biological mechanisms through which air pollutants may lead to intrauterine growth restriction and premature birth were reviewed. To make progress, this research field needs input from toxicology, exposure assessment, and clinical research, especially to aid in the identification and exposure assessment of feto-toxic agents in ambient air, in the development of early markers of adverse reproductive outcomes, and of relevant biological pathways. In particular, additional research using animal models would help better delineate the biological mechanisms underpinning the associations reported in human studies.

PROGRAMMABLE EXPOSURE CONTROL SYSTEM FOR DETERMINATION OF THE EFFECTS OF POLLUTANT EXPOSURE REGIMES ON PLANT GROWTH

EPA Science Inventory

A field-exposure research facility was constructed to provide a controlled environment to determine the influence of the various components of ozone exposure on plant response. The facility uses modified open-top chambers and an automated control system for continuous delivery an...

Bloodborne Pathogens Exposure Control Plan.

ERIC Educational Resources Information Center

National Child Care Association, Atlanta, GA.

This sample exposure control plan is a guide to assist child care providers in complying with the blood-borne pathogens standard issued by the Occupational Safety and Health Administration (OSHA). The standard requires employers to establish a written exposure control plan by May 5, 1992 (for exposure to microorganisms in human blood that cause…

Coherent Bragg nanodiffraction at the hard X-ray Nanoprobe beamline.

PubMed

Hruszkewycz, S O; Holt, M V; Maser, J; Murray, C E; Highland, M J; Folkman, C M; Fuoss, P H

2014-03-06

Bragg coherent diffraction with nanofocused hard X-ray beams provides unique opportunities for quantitative in situ studies of crystalline structure in nanoscale regions of complex materials and devices by a variety of diffraction-based techniques. In the case of coherent diffraction imaging, a major experimental challenge in using nanoscale coherent beams is maintaining a constant scattering volume such that coherent fringe visibility is maximized and maintained over the course of an exposure lasting several seconds. Here, we present coherent Bragg diffraction patterns measured from different nanostructured thin films at the Sector 26 Nanoprobe beamline at the Advanced Photon Source and demonstrate that with nanoscale positional control, coherent diffraction patterns can be measured with source-limited fringe visibilities more than 50% suitable for imaging by coherent Bragg ptychography techniques.

Coherent Bragg nanodiffraction at the hard X-ray Nanoprobe beamline

PubMed Central

Hruszkewycz, S. O.; Holt, M. V.; Maser, J.; Murray, C. E.; Highland, M. J.; Folkman, C. M.; Fuoss, P. H.

2014-01-01

Bragg coherent diffraction with nanofocused hard X-ray beams provides unique opportunities for quantitative in situ studies of crystalline structure in nanoscale regions of complex materials and devices by a variety of diffraction-based techniques. In the case of coherent diffraction imaging, a major experimental challenge in using nanoscale coherent beams is maintaining a constant scattering volume such that coherent fringe visibility is maximized and maintained over the course of an exposure lasting several seconds. Here, we present coherent Bragg diffraction patterns measured from different nanostructured thin films at the Sector 26 Nanoprobe beamline at the Advanced Photon Source and demonstrate that with nanoscale positional control, coherent diffraction patterns can be measured with source-limited fringe visibilities more than 50% suitable for imaging by coherent Bragg ptychography techniques. PMID:24470418

Direct hip joint distraction during acetabular fracture surgery using the AO universal manipulator.

PubMed

Calafi, L Afshin; Routt, M L Chip

2010-02-01

Certain acetabular fractures may necessitate distraction of the hip joint for removal of intra-articular debris and assessment of reduction. Distraction can be accomplished by manual traction, using a traction table or an AO universal manipulator (UM). The UM is a relatively simple and an inexpensive device that can provide focal distraction in a controlled manner without the risks associated with the use of a traction table. We describe a technique using the UM for hip joint distraction during acetabular fracture surgery through a Kocher-Langenbeck surgical exposure.

Serum Zinc, Iron, and Copper Concentrations during Typhoid Fever in Man: Effect of Chloramphenicol Therapy

DTIC Science & Technology

1974-11-12

automated colori- exposure. In those volunteers who became clinically metric technique (13, 14). ill and were hospitalized, blood samples were ob- Monkey ...study. Two adult female rhesus monkeys tained for an additional seven days. were inoculated intravenously with 1 x 1010 viable S. Serum zinc, iron, and...on Serum Transferrin and am0 at-Macroglebullfl Concentrations zoo D a ft T r peora laa r mr U ea n b Uoac t o o Control 283 * 7 ml339 :L 13 10 di 120

DNA adducts: Mass spectrometry methods and future prospects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farmer, P.B.; Brown, K.; Tompkins, E.

2005-09-01

Detection of DNA adducts is widely used for the monitoring of exposure to genotoxic carcinogens. Knowledge of the nature and amounts of DNA adducts formed in vivo also gives valuable information regarding the mutational effects that may result from particular exposures. The power of mass spectrometry (MS) to achieve qualitative and quantitative analyses of human DNA adducts has increased greatly in recent years with the development of improved chromatographic interfaces and ionisation sources. Adducts have been detected on nucleic acid bases, 2'-deoxynucleosides or 2'-deoxynucleotides, with LC-MS/MS being the favoured technique for many of these analyses. Our current applications of thismore » technique include the determination of N7-(2-carbamoyl-2-hydroxyethyl)-guanine, which was postulated to be found as a DNA repair product in urine following exposure to acrylamide, and of 8-oxo-7,8-dihydro-2'-deoxyguanosine and 8-oxo-7,8-dihydro-2'-deoxyadenosine, as markers of oxidative damage in human lymphocyte DNA. Higher sensitivity (with a detection limit of 1-10 adducts/10{sup 12} nucleotides) may be achieved by the use of accelerator mass spectrometry (AMS), although this requires the presence of certain isotopes, such as [{sup 14}C], in the material being analysed. In order to make this technique more amenable for studies of human exposure to environmental carcinogens, new postlabelling techniques, incorporating [{sup 14}C] into specific DNA adducts after formation, are being developed. It is expected that combining the use of advanced MS techniques with existing {sup 32}P-postlabelling and immunochemical methodologies will contribute greatly to the understanding of the burden of human exposure to environmental carcinogens.« less

Unraveling atomic-level self-organization at the plasma-material interface

NASA Astrophysics Data System (ADS)

Allain, J. P.; Shetty, A.

2017-07-01

The intrinsic dynamic interactions at the plasma-material interface and critical role of irradiation-driven mechanisms at the atomic scale during exposure to energetic particles require a priori the use of in situ surface characterization techniques. Characterization of ‘active’ surfaces during modification at atomic-scale levels is becoming more important as advances in processing modalities are limited by an understanding of the behavior of these surfaces under realistic environmental conditions. Self-organization from exposure to non-equilibrium and thermalized plasmas enable dramatic control of surface morphology, topography, composition, chemistry and structure yielding the ability to tune material properties with an unprecedented level of control. Deciphering self-organization mechanisms of nanoscale morphology (e.g. nanodots, ripples) and composition on a variety of materials including: compound semiconductors, semiconductors, ceramics, polymers and polycrystalline metals via low-energy ion-beam assisted plasma irradiation are critical to manipulate functionality in nanostructured systems. By operating at ultra-low energies near the damage threshold, irradiation-driven defect engineering can be optimized and surface-driven mechanisms controlled. Tunability of optical, electronic, magnetic and bioactive properties is realized by reaching metastable phases controlled by atomic-scale irradiation-driven mechanisms elucidated by novel in situ diagnosis coupled to atomistic-level computational tools. Emphasis will be made on tailored surface modification from plasma-enhanced environments on particle-surface interactions and their subsequent modification of hard and soft matter interfaces. In this review, we examine current trends towards in situ and in operando surface and sub-surface characterization to unravel atomic-scale mechanisms at the plasma-material interface. This work will emphasize on recent advances in the field of plasma and ion-induced nanopatterning and nanostructuring as well as ultra-thin film deposition. Future outlook will examine the critical role of complementary surface-sensitive techniques and trends towards advances in both in situ and in operando tooling.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Narod, S.A.; Douglas, G.R.; Nestmann, E.R.

The importance of inherited mutations as a cause of human disease has been established clearly through examples of well-defined genetic anomalies, such as Down syndrome and retinoblastoma. Furthermore, it is suspected that environmental contaminants induce mutations resulting in increased risk for such defects in subsequent generations of persons exposed. The present lack of direct evidence for induced inherited genetic disorders in human beings hampers the development of risk estimation techniques for extrapolation from animal models. The most extensive prospective epidemiologic studies of inherited genetic effects have involved survivors of atomic bomb detonations and patients treated with cancer chemotherapy. In neithermore » case has a significant elevation in inherited genetic effects or cancer been detected in the offspring of exposed individuals. Epidemiologic studies of subjects receiving chronic exposure may be confounded by the effect of maternal exposure during pregnancy. Consideration of only paternal exposure can minimize the confounding influence of teratogenicity, enhancing the resolving power of studies for inherited effects. Using this approach, retrospective (case-control) studies of childhood cancer patients have provided limited but suggestive evidence for inheritance of induced effects. Endpoints, such as congenital malformations and spontaneous abortion following paternal exposure, can also be considered as indicators of heritable mutagenic effects. For example, there is limited evidence suggesting that paternal exposure to anaesthetic gases may cause miscarriage and congenital abnormalities as a result of induced male germ cell mutations. 104 references.« less

Effects of Various Wavelength Ranges of Vacuum Ultraviolet Radiation on Teflon FEP Film Investigated

NASA Technical Reports Server (NTRS)

Dever, Joyce A.; McCracken, Cara A.

2004-01-01

Teflon Fluorinated Ethylene Propylene (FTP) films (DuPont) have been widely used for spacecraft thermal control and have been observed to become embrittled and cracked upon exposure to the space environment. This degradation has been attributed to a synergistic combination of radiation and thermal effects. A research study was undertaken at the NASA Glenn Research Center to examine the effects of different wavelength ranges of vacuum ultraviolet (VUV) radiation on the degradation of the mechanical properties of FEP. This will contribute to an overall understanding of space radiation effects on Teflon FEP, and will provide information necessary to determine appropriate techniques for using laboratory tests to estimate space VUV degradation. Research was conducted using inhouse facilities at Glenn and was carried out, in part, through a grant with the Cleveland State University. Samples of Teflon FEP film of 50.8 microns thickness were exposed to radiation from a VUV lamp from beneath different cover windows to provide different exposure wavelength ranges: MgF2 (115 to 400 nm), crystalline quartz (140 to 400 nm), and fused silica (FS, 155 to 400 nm). Following exposure, FEP film specimens were tensile tested to determine the ultimate tensile strength and elongation at failure as a function of the exposure duration for each wavelength range. The graphs show the effect of ultraviolet exposure on the mechanical properties of the FEP samples.

Pulmonary Responses of Sprague-Dawley Rats in Single Inhalation Exposure to Graphene Oxide Nanomaterials

PubMed Central

Han, Sung Gu; Kim, Jin Kwon; Shin, Jae Hoon; Hwang, Joo Hwan; Lee, Jong Seong; Kim, Tae-Gyu; Lee, Ji Hyun; Lee, Gun Ho; Kim, Keun Soo; Song, Nam Woong; Ahn, Kangho

2015-01-01

Graphene is receiving increased attention due to its potential widespread applications in future. However, the health effects of graphene have not yet been well studied. Therefore, this study examined the pulmonary effects of graphene oxide using male Sprague-Dawley rats and a single 6-hour nose-only inhalation technique. Following the exposure, the rats were allowed to recover for 1 day, 7 days, or 14 days. A total of three groups were compared: control (fresh air), low concentration (0.46 ± 0.06 mg/m3), and high concentration (3.76 ± 0.24 mg/m3). The exposure to graphene oxide did not induce significant changes in the body weights, organ weights, and food consumption during the 14 days of recovery time. The microalbumin and lactate dehydrogenase levels in the bronchoalveolar lavage (BAL) fluid were not significantly changed due to the exposure. Similarly, total cell count, macrophages, polymorphonuclear leukocytes, and lymphocytes were not significantly altered in the BAL fluid. Plus, the histopathological examination of the rat lungs only showed an uptake of graphene oxide in the alveolar macrophages of the high-concentration group. Therefore, these results demonstrate that the single inhalation exposure to graphene oxide induce minimal toxic responses in rat lungs at the concentrations and time points used in the present study. PMID:26295037

Exposure to Electrical Contact Currents and the Risk of Childhood Leukemia

PubMed Central

Does, Monique; Scélo, Ghislaine; Metayer, Catherine; Selvin, Steve; Kavet, Robert; Buffler, Patricia

2011-01-01

The objectives of this study were to examine the association between contact current exposure and the risk of childhood leukemia and to investigate the relationship between residential contact currents and magnetic fields. Indoor and outdoor contact voltage and magnetic-field measurements were collected for the diagnosis residence of 245 cases and 269 controls recruited in the Northern California Childhood Leukemia Study (2000–2007). Logistic regression techniques produced odds ratios (OR) adjusted for age, sex, Hispanic ethnicity, mother’s race and household income. No statistically significant associations were seen between childhood leukemia and indoor contact voltage level [exposure ≥90th percentile (10.5 mV): OR = 0.83, 95% confidence interval (CI): 0.45, 1.54], outdoor contact voltage level [exposure ≥90th percentile (291.2 mV): OR = 0.89, 95% CI: 0.48, 1.63], or indoor magnetic-field levels (>0.20 μT: OR = 0.76, 95% CI: 0.30, 1.93). Contact voltage was weakly correlated with magnetic field; correlation coefficients were r = 0.10 (P = 0.02) for indoor contact voltage and r = 0.15 (P = 0.001) for outdoor contact voltage. In conclusion, in this California population, there was no evidence of an association between childhood leukemia and exposure to contact currents or magnetic fields and a weak correlation between measures of contact current and magnetic fields. PMID:21388283

Airborne Exposures to Polycyclic Aromatic Compounds Among Workers in Asphalt Roofing Manufacturing Facilities.

PubMed

Trumbore, David C; Osborn, Linda V; Johnson, Kathleen A; Fayerweather, William E

2015-01-01

We studied exposure of 151 workers to polycyclic aromatic compounds and asphalt emissions during the manufacturing of asphalt roofing products-including 64 workers from 10 asphalt plants producing oxidized, straight-run, cutback, and wax- or polymer-modified asphalts, and 87 workers from 11 roofing plants producing asphalt shingles and granulated roll roofing. The facilities were located throughout the United States and used asphalt from many refiners and crude oils. This article helps fill a gap in exposure data for asphalt roofing manufacturing workers by using a fluorescence technique that targets biologically active 4-6 ring polycyclic aromatic compounds and is strongly correlated with carcinogenic activity in animal studies. Worker exposures to polycyclic aromatic compounds were compared between manufacturing plants, at different temperatures and using different raw materials, and to important external benchmarks. High levels of fine limestone particulate in the plant air during roofing manufacturing increased polycyclic aromatic compound exposure, resulting in the hypothesis that the particulate brought adsorbed polycyclic aromatic compounds to the worker breathing zone. Elevated asphalt temperatures increased exposures during the pouring of asphalt. Co-exposures in these workplaces which act as confounders for both the measurement of total organic matter and fluorescence were detected and their influence discussed. Exposures to polycyclic aromatic compounds in asphalt roofing manufacturing facilities were lower than or similar to those reported in hot-mix paving application studies, and much below those reported in studies of hot application of built-up roofing asphalt. These relatively low exposures in manufacturing are primarily attributed to air emission controls in the facilities, and the relatively moderate temperatures, compared to built-up roofing, used in these facilities for oxidized asphalt. The exposure to polycyclic aromatic compounds was a very small part of the overall worker exposure to asphalt fume, on average less than 0.07% of the benzene-soluble fraction. Measurements of benzene-soluble fraction were uniformly below the American Conference of Governmental Industrial Hygienists' Threshold Limit Value for asphalt fume.

Holographic digital microscopy in on-line process control

NASA Astrophysics Data System (ADS)

Osanlou, Ardeshir

2011-09-01

This article investigates the feasibility of real-time three-dimensional imaging of microscopic objects within various emulsions while being produced in specialized production vessels. The study is particularly relevant to on-line process monitoring and control in chemical, pharmaceutical, food, cleaning, and personal hygiene industries. Such processes are often dynamic and the materials cannot be measured once removed from the production vessel. The technique reported here is applicable to three-dimensional characterization analyses on stirred fluids in small reaction vessels. Relatively expensive pulsed lasers have been avoided through the careful control of the speed of the moving fluid in relation to the speed of the camera exposure and the wavelength of the continuous wave laser used. The ultimate aim of the project is to introduce a fully robust and compact digital holographic microscope as a process control tool in a full size specialized production vessel.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perkins, Michael W.; Pierre, Zdenka; Rezk, Peter

Respiratory toxicity and lung injury following inhalation exposure to chemical warfare nerve agent soman was examined in guinea pigs without therapeutics to improve survival. A microinstillation inhalation exposure technique that aerosolizes the agent in the trachea was used to administer soman to anesthetized age and weight matched male guinea pigs. Animals were exposed to 280, 561, 841, and 1121 mg/m{sup 3} concentrations of soman for 4 min. Survival data showed that all saline controls and animals exposed to 280 and 561 mg/m{sup 3} soman survived, while animals exposed to 841, and 1121 mg/m{sup 3} resulted in 38% and 13% survival,more » respectively. The microinstillation inhalation exposure LCt{sub 50} for soman determined by probit analysis was 827.2 mg/m{sup 3}. A majority of the animals that died at 1121 mg/m{sup 3} developed seizures and died within 15-30 min post-exposure. There was a dose-dependent decrease in pulse rate and blood oxygen saturation of animals exposed to soman at 5-6.5 min post-exposure. Body weight loss increased with the dose of soman exposure. Bronchoalveolar lavage (BAL) fluid and blood acetylcholinesterase and butyrylcholinesterase activity was inhibited dose-dependently in soman treated groups at 24 h. BAL cells showed a dose-dependent increase in cell death and total cell counts following soman exposure. Edema by wet/dry weight ratio of the accessory lung lobe and trachea was increased slightly in soman exposed animals. An increase in total bronchoalveolar lavage fluid protein was observed in soman exposed animals at all doses. Differential cell counts of BAL and blood showed an increase in total lymphocyte counts and percentage of neutrophils. These results indicate that microinstillation inhalation exposure to soman causes respiratory toxicity and acute lung injury in guinea pigs.« less

Evidence for a causative role of N-methyl-D-aspartate receptors in an in vitro model of alcohol withdrawal hyperexcitability.

PubMed

Thomas, M P; Monaghan, D T; Morrisett, R A

1998-10-01

Synaptic mechanisms underlying hyperexcitability due to withdrawal from chronic ethanol exposure were investigated in a hippocampal explant model system using electrophysiological techniques. Whole-cell voltage clamp recordings from CA1 pyramidal cells demonstrated that acute ethanol exposure inhibited N-methyl-D-aspartate receptor (NMDAR)-mediated excitatory postsynaptic currents by over 40%. Chronic ethanol exposure for 6 to 11 days at 35 or 75 mM induced no differences from control explants in the fast component of the population synaptic response (non-NMDAR-mediated). Prolonged field potential recordings (to 10 hr) were used to monitor the withdrawal process in vitro. Ethanol-exposed explants from both 35 and 75 mM groups displayed an increase (60% and 89%, respectively) in the NMDAR-mediated component of synaptic transmission on withdrawal from chronic exposure. Prolonged tonic-clonic electrographic seizure activity was consistently observed after ethanol withdrawal only after the increase in NMDAR function. This hyperexcitability was inhibited by the NMDAR antagonist D-2-amino-5-phosphonovaleric acid and returned once the NMDAR component was reestablished after antagonist washout. In situ hybridization studies suggest that expression of NR2B subunit mRNA may be enhanced in explants after chronic ethanol exposure. No lasting differences were observed in the NMDAR component after acute in vitro ethanol exposure and withdrawal. These data suggest that the occurance of ethanol withdrawal hyperexcitability in this system may be directly dependent on alterations in NMDAR function after chronic exposure. Since this region and others that contain ethanol sensitive NMDARs may serve as epileptic foci, long term alterations in NMDAR function may be expected to generate paroxysmal depolarizing shifts underlying ictal events after withdrawal from ethanol exposure.

For good measure: Origins and prospects of exposure science (2007 Wesolowski Award Lecture).

PubMed

Fenske, Richard A

2010-09-01

Measurement is the foundation of exposure science. Associations between illness and environmental agents have been observed for millennia, but the ability to quantify exposure and dose has been possible only in the last century. Improved means of measurement and refined concepts of who, what, when, where, and why to measure have been the seminal contributions of exposure science to the study of disease causation and prevention. This paper examines critical advancements in exposure assessment associated with workplace health and safety, and the groundbreaking work of the US Public Health Service. Many of the key concepts of modern exposure science have their origin in these early studies. Occupational hygiene scientists have conducted receptor-based exposure analyses for more than 80 years, evaluating indoor air, defining microenvironments, and developing personal sampling techniques. Biological monitoring of community populations including children, dermal exposure monitoring, duplicate diet studies, and multi-pathway, aggregate exposure assessments can be traced to early public health studies. As we look to the future, we see that new technologies and techniques are expanding the scope of exposure science dramatically. We need to ensure that the highest of scientific standards are maintained, make a greater effort to include occupational hygiene scientists, microbiologists, and behavioral scientists in the field, and promote new sources of training and research support. Exposure science has a critical role to play in the prevention strategy that is central to public health.

Image Alignment for Multiple Camera High Dynamic Range Microscopy.

PubMed

Eastwood, Brian S; Childs, Elisabeth C

2012-01-09

This paper investigates the problem of image alignment for multiple camera high dynamic range (HDR) imaging. HDR imaging combines information from images taken with different exposure settings. Combining information from multiple cameras requires an alignment process that is robust to the intensity differences in the images. HDR applications that use a limited number of component images require an alignment technique that is robust to large exposure differences. We evaluate the suitability for HDR alignment of three exposure-robust techniques. We conclude that image alignment based on matching feature descriptors extracted from radiant power images from calibrated cameras yields the most accurate and robust solution. We demonstrate the use of this alignment technique in a high dynamic range video microscope that enables live specimen imaging with a greater level of detail than can be captured with a single camera.

Image Alignment for Multiple Camera High Dynamic Range Microscopy

PubMed Central

Eastwood, Brian S.; Childs, Elisabeth C.

2012-01-01

This paper investigates the problem of image alignment for multiple camera high dynamic range (HDR) imaging. HDR imaging combines information from images taken with different exposure settings. Combining information from multiple cameras requires an alignment process that is robust to the intensity differences in the images. HDR applications that use a limited number of component images require an alignment technique that is robust to large exposure differences. We evaluate the suitability for HDR alignment of three exposure-robust techniques. We conclude that image alignment based on matching feature descriptors extracted from radiant power images from calibrated cameras yields the most accurate and robust solution. We demonstrate the use of this alignment technique in a high dynamic range video microscope that enables live specimen imaging with a greater level of detail than can be captured with a single camera. PMID:22545028

Assessment of skin exposure to nickel, chromium and cobalt by acid wipe sampling and ICP-MS.

PubMed

Lidén, Carola; Skare, Lizbet; Lind, Birger; Nise, Gun; Vahter, Marie

2006-05-01

There is a great need to accurately assess skin exposure to contact allergens. We have developed a technique for assessment of skin exposure to nickel, chromium and cobalt using acid wipe sampling by cellulose wipes with 1% nitric acid. Chemical analysis was performed by inductively coupled plasma mass spectrometry (ICP-MS). The recovery of nickel, chromium and cobalt from arms and palms was 93%. The analytical result is expressed in terms of mass per unit area (microg/cm(2)). The developed acid wipe sampling technique is suitable for determination of nickel, chromium and cobalt deposited on the skin. The technique may be used in workplace studies, in studies of individuals in the general population, in dermatitis patients, in identification of risk groups, as well as in developing preventive strategies and in follow-up after intervention.

Constraints on Exposure Ages of Lunar and Asteroidal Regolith Particles

NASA Technical Reports Server (NTRS)

Berger, Eve L.; Keller, Lindsay P

2014-01-01

Mineral grains in lunar and asteroidal regolith samples provide a unique record of their interaction with the space environment. Exposure to the solar wind results in implantation effects that are preserved in the rims of grains (typically the outermost 100 nm), while impact processes result in the accumulation of vapor-deposited elements, impact melts and adhering grains on particle surfaces. These processes are collectively referred to as space weathering. A critical element in the study of these processes is to determine the rate at which these effects accumulate in the grains during their space exposure. For small particulate samples, one can use the density of solar flare particle tracks to infer the length of time the particle was at the regolith surface (i.e., its exposure age). We have developed a new technique that enables more accurate determination of solar flare particle track densities in mineral grains <50 micron in size that utilizes focused ion beam (FIB) sample preparation combined with transmission electron microscopy (TEM) imaging. We have applied this technique to lunar soil grains from the Apollo 16 site (soil 64501) and most recently to samples from asteroid 25143 Itokawa returned by the Hayabusa mission. Our preliminary results show that the Hayabusa grains have shorter exposure ages compared to typical lunar soil grains. We will use these techniques to re-examine the track density-exposure age calibration from lunar samples reported by Blanford et al. (1975).

Promoting early exposure monitoring for respirable crystalline silica: Taking the laboratory to the mine site

PubMed Central

Cauda, Emanuele; Miller, Arthur; Drake, Pamela

2017-01-01

The exposure to respirable crystalline silica (RCS) in the mining industry is a recognized occupational hazard. The assessment and monitoring of the exposure to RCS is limited by two main factors: (1) variability of the silica percent in the mining dust and (2) lengthy off-site laboratory analysis of collected samples. The monitoring of respirable dust via traditional or real-time techniques is not adequate. A solution for on-site quantification of RCS in dust samples is being investigated by the Office of Mine Safety and Health Research, a division of the National Institute for Occupational Safety and Health. The use of portable Fourier transform infrared analyzers in conjunction with a direct-on-filter analysis approach is proposed. The progress made so far, the necessary steps in progress, and the application of the monitoring solution to a small data set is presented. When developed, the solution will allow operators to estimate RCS immediately after sampling, resulting in timelier monitoring of RCS for self-assessment of compliance at the end of the shift, more effective engineering monitoring, and better evaluation of control technologies. PMID:26558490

Past Exposure to Densely Ionizing Radiation Leaves a Unique Permanent Signature in the Genome

PubMed Central

Hande, M. Prakash; Azizova, Tamara V.; Geard, Charles R.; Burak, Ludmilla E.; Mitchell, Catherine R.; Khokhryakov, Valentin F.; Vasilenko, Evgeny K.; Brenner, David J.

2003-01-01

Speculation has long surrounded the question of whether past exposure to ionizing radiation leaves a unique permanent signature in the genome. Intrachromosomal rearrangements or deletions are produced much more efficiently by densely ionizing radiation than by chemical mutagens, x-rays, or endogenous aging processes. Until recently, such stable intrachromosomal aberrations have been very hard to detect, but a new chromosome band painting technique has made their detection practical. We report the detection and quantification of stable intrachromosomal aberrations in lymphocytes of healthy former nuclear-weapons workers who were exposed to plutonium many years ago. Even many years after occupational exposure, more than half the blood cells of the healthy plutonium workers contain large (>6 Mb) intrachromosomal rearrangements. The yield of these aberrations was highly correlated with plutonium dose to the bone marrow. The control groups contained very few such intrachromosomal aberrations. Quantification of this large-scale chromosomal damage in human populations exposed many years earlier will lead to new insights into the mechanisms and risks of cytogenetic damage. PMID:12679897

Optimum Water Chemistry in radiation field buildup control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Chien, C.

1995-03-01

Nuclear utilities continue to face the challenGE of reducing exposure of plant maintenance personnel. GE Nuclear Energy has developed the concept of Optimum Water Chemistry (OWC) to reduce the radiation field buildup and minimize the radioactive waste production. It is believed that reduction of radioactive sources and improvement of the water chemistry quality should significantly reduce both the radiation exposure and radwaste production. The most important source of radioactivity is cobalt and replacement of cobalt containing alloy in the core region as well as in the entire primary system is considered the first priority to achieve the goal of lowmore » exposure and minimized waste production. A plant specific computerized cobalt transport model has been developed to evaluate various options in a BWR system under specific conditions. Reduction of iron input and maintaining low ionic impurities in the coolant have been identified as two major tasks for operators. Addition of depleted zinc is a proven technique to reduce Co-60 in reactor water and on out-of-core piping surfaces. The effect of HWC on Co-60 transport in the primary system will also be discussed.« less

Factors Affecting Comparative Resistance of Naturally Occurring and Subcultured Pseudomonas aeruginosa to Disinfectants

PubMed Central

Carson, L. A.; Favero, M. S.; Bond, W. W.; Petersen, N. J.

1972-01-01

A strain of Pseudomonas aeruginosa was isolated in pure culture from the reservoir of a hospital mist therapy unit by an extinction-dilution technique; its natural distilled water environment was used as a growth and maintenance medium. After a single subculture on Trypticase soy agar, the strain showed a marked decrease in resistance to inactivation by acetic acid, glutaraldehyde, chlorine dioxide, and a quaternary ammonium compound when compared with naturally occurring cells grown in mist therapy unit water. The following factors were observed to affect the relative resistances of naturally occurring and subcultured cells of the P. aeruginosa strain: (i) temperature at which the cultures were incubated prior to exposure to disinfectants, (ii) growth phase of the cultures at the time of exposure to disinfectants, (iii) nature of the suspending menstruum for disinfectants, and (iv) exposure to fluorescent light during incubation of inocula prior to testing. The applied significance of these findings may alter the present concepts of disinfectant testing as well as routine control procedures in the hospital environment. PMID:4624209

In-Situ Swelling For Holographic Color Control

NASA Astrophysics Data System (ADS)

Walker Parker, Julie L.; Benton, Stephen A.

1989-05-01

Deliberate variations of the emulsion thickness between holographic exposures and reconstruction produce a range of output wavelengths from a fixed exposure wavelength, a technique known as "pseudo-color" multi-color reflection holography. Usual methods require the removal of the film or plate from the holographic setup between exposures for imbibition of a swelling agent, followed by drying and replacement, so that a retention of the swelling agent forces a physical increase in the thickness of the emulsion. The density (and hence the thickness) of the gelatin binder can also be varied by changing its electrolytic environment. By immersing the holographic emulsion in a suitable solution, allowing it to come to a new equilibrium thickness, and exposing with a long-wavelength laser, shorter wavelength reconstructions can be obtained without removing the film or plate from the setup. Accurate changes of solution can make a precise sequence of swellings possible, producing multiple reconstruction colors from a set of constant-wavelength recordings. Here we describe pre-treatments of the emulsion that make rapid and stable equilibria possible, and swelling bath sequences that produce color primaries suitable for full-color computer-graphic holographic imagery.

[Validation of measurement methods and estimation of uncertainty of measurement of chemical agents in the air at workstations].

PubMed

Dobecki, Marek

2012-01-01

This paper reviews the requirements for measurement methods of chemical agents in the air at workstations. European standards, which have a status of Polish standards, comprise some requirements and information on sampling strategy, measuring techniques, type of samplers, sampling pumps and methods of occupational exposure evaluation at a given technological process. Measurement methods, including air sampling and analytical procedure in a laboratory, should be appropriately validated before intended use. In the validation process, selected methods are tested and budget of uncertainty is set up. The validation procedure that should be implemented in the laboratory together with suitable statistical tools and major components of uncertainity to be taken into consideration, were presented in this paper. Methods of quality control, including sampling and laboratory analyses were discussed. Relative expanded uncertainty for each measurement expressed as a percentage, should not exceed the limit of values set depending on the type of occupational exposure (short-term or long-term) and the magnitude of exposure to chemical agents in the work environment.

Preservation of tumour oxygen after hyperbaric oxygenation monitored by magnetic resonance imaging

PubMed Central

Kinoshita, Y; Kohshi, K; Kunugita, N; Tosaki, T; Yokota, A

1999-01-01

Hyperbaric oxygen (HBO) has been proposed to reduce tumour hypoxia by increasing the dissolved molecular oxygen in tissue. Using a non-invasive magnetic resonance imaging (MRI) technique, we monitored the changes in MRI signal intensity after HBO exposure because dissolved paramagnetic molecular oxygen itself shortens the T1 relation time. SCCVII tumour cells transplanted in mice were used. The molecular oxygen-enhanced MR images were acquired using an inversion recovery-preparation fast low angle shot (IR-FLASH) sequence sensitizing the paramagnetic effects of molecular oxygen using a 4.7 tesla MR system. MR signal of muscles decreased rapidly and returned to the control level within 40 min after decompression, whereas that of tumours decreased gradually and remained at a high level 60 min after HBO exposure. In contrast, the signal from the tumours in the normobaric oxygen group showed no significant change. Our data suggested that MR signal changes of tumours and muscles represent an alternation of extravascular oxygenation. The preserving tumour oxygen concentration after HBO exposure may be important regarding adjuvant therapy for cancer patients. © 2000 Cancer Research Campaign PMID:10638972

The Relative Effects of Manual Versus Automatic Exposure Control on Radiation Dose to Vital Organs in Total Hip Arthroplasty.

PubMed

Harper, Katharine D; Li, Shidong; Jennings, Rachel; Amer, Kamil M; Haydel, Christopher; Ali, Sayed

2018-01-01

Technologic advances have reduced medical radiation exposure while maintaining image quality. The purpose of this study was to determine the effects of the presence of total hip arthroplasty implants, compared with native hips, on radiation exposure of the most radiosensitive organs when manual and automatic exposure control settings are used. Detection probes were placed at six locations (stomach, sigmoid colon, right pelvic wall, left pelvic wall, pubic symphysis, and anterior pubic skin) in a cadaver. Radiographs were obtained with the use of manual and automatic exposure control protocols, with exposures recorded. A total hip arthroplasty implant was placed in the cadaver, probe positioning was confirmed, and the radiographs were repeated, with exposure values recorded. The control probe placed at the stomach had values ranging from 0.00 mSv to 0.01 mSv in protocols with and without implants. With the manual protocol, exposures in the pelvis ranged from 0.36 mSv to 2.74 mSv in the native hip and from 0.33 mSv to 2.24 mSv after implant placement. The increases in exposure after implant placement, represented as relative risk, were as follows: stomach, 1.000; pubic symphysis, 0.818; left pelvic wall, 1.381; sigmoid colon, 1.550; right pelvic wall, 0.917; and anterior pubic skin, 1.015. With automatic exposure control, exposures in the pelvis ranged from 0.07 mSv to 0.89 mSv in the native hip and from 0.21 mSv to 1.15 mSv after implant placement. With automatic exposure control, the increases in exposure after implant placement, represented as relative risk, were as follows: stomach, 1.000; pubic symphysis, 1.292; left pelvic wall, 1.476; sigmoid colon, 2.182; right pelvic wall, 3.000; and anterior pubic skin, 1.378. The amount of radiation to which patients are exposed as a result of medical procedures or imaging, and whether exposure is associated with an increased risk of malignant transformation, are the subject of ongoing debate. We found that after insertion of a total hip arthroplasty implant, exposure values increased threefold at some anatomic locations and surpassed 1 mSv, the generally accepted threshold for concern. Radiation exposure to radiosensitive organs increased up to threefold after total hip implantation with automatic exposure control and up to approximately 1.5 times with the manual protocol. Doses were greater with manual exposures than with automatic exposure control (except at the control probe on the stomach, where exposure was negligible, as expected). However, after implant placement, doses increased more with automatic exposure control than with manual exposure. This difference can be attributed to increased scatter and the difficulty of dose modification because of the density of the implant. Current radiographic protocols should be reassessed to determine if the benefits of frequent radiographs outweigh the newly demonstrated risks.

[The application of a synthetic index of exposure in the manual lifting of patients: the initial validation experiences].

PubMed

Battevi, N; Consonni, D; Menoni, O; Ricci, M G; Occhipinti, E; Colombini, D

1999-01-01

Via a multicentre study coordinated by the EPM research group carried out in 216 wards in a total of 56 hospitals, old peoples homes and geriatric departments, it was possible to quantify exposure to patient handling (classified in 4 classes: 0-1.5 negligible, 1.51-5 slight to average, 5.01-10 average to high, > 10 elevated), and at the same time identify the damage to the lumbosacral spine thus caused. Both assessment of exposure and identification of health impairment were carried out using homogeneous methods. Subjects with work seniority in the job of less than 6 months and subjects who had been transferred because of back trouble were excluded from the study. It was therefore possible to carry out two types of study to assess the association between exposure and impairment. In study A, covering 3021 subjects, an analysis was performed of the association between exposure index, positive response to the anamnestic threshold for lumbosacral disorders and acute low back pain using the method of logistic analysis to obtain the prevalence odds ratios. In study B, covering 418 subjects, the analysis of association was performed on the incidence rates of episodes of acute low back pain and pharmacologically controlled acute low back pain, assuming that exposure in the wards had remained constant. The technique used was Poisson regression, thereby calculating the relative incidence rate ratios. Both for PORs and IRRs the reference group consisted of the exposure class judged as negligible (exposure index 0-1.5). The results showed that the PORs calculated for positive lumbar threshold were significant for increasing exposure classes with a positive trend for the second and third exposure class but not for the last, presumably due to a healthy worker selection effect. Neither in Study A nor in Study B were any associations observed between exposure and acute low back pain occurring in the previous 12 months: this may be due to the fact that the impairment indicator does not appear to be appropriate in terms of latency period. A different result was obtained in Study B which showed a good association between exposure and incidence rates of episodes of acute low back pain and pharmacologically controlled acute low back pain according to department. The IRRs showed a positive trend both for acute episodes (IRR: 1.932, 2.439, 2.847) and for acute plus pharmacologically controlled acute episodes (1.798, 1.830, 4.523). On the basis of these results, even with the caution required for the reasons explained in the text, it seems to be possible to identify three grades of exposure which correspond to increasing probability of impairment of the lumbosacral region of the spine: the first where risk seems negligible corresponds to an exposure level between 0 and 1.5. The second, where the episodes of low back pain may occur with an incidence 3.8 times greater, corresponds to an exposure level between 1.51 and 5, and the third corresponds to exposure levels exceeding 5, where the episodes of low back pain may occur with an incidence up to 5.6 times greater than expected.

Effects of exposure equalization on image signal-to-noise ratios in digital mammography: A simulation study with an anthropomorphic breast phantom

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu Xinming; Lai Chaojen; Whitman, Gary J.

Purpose: The scan equalization digital mammography (SEDM) technique combines slot scanning and exposure equalization to improve low-contrast performance of digital mammography in dense tissue areas. In this study, full-field digital mammography (FFDM) images of an anthropomorphic breast phantom acquired with an anti-scatter grid at various exposure levels were superimposed to simulate SEDM images and investigate the improvement of low-contrast performance as quantified by primary signal-to-noise ratios (PSNRs). Methods: We imaged an anthropomorphic breast phantom (Gammex 169 ''Rachel,'' Gammex RMI, Middleton, WI) at various exposure levels using a FFDM system (Senographe 2000D, GE Medical Systems, Milwaukee, WI). The exposure equalization factorsmore » were computed based on a standard FFDM image acquired in the automatic exposure control (AEC) mode. The equalized image was simulated and constructed by superimposing a selected set of FFDM images acquired at 2, 1, 1/2, 1/4, 1/8, 1/16, and 1/32 times of exposure levels to the standard AEC timed technique (125 mAs) using the equalization factors computed for each region. Finally, the equalized image was renormalized regionally with the exposure equalization factors to result in an appearance similar to that with standard digital mammography. Two sets of FFDM images were acquired to allow for two identically, but independently, formed equalized images to be subtracted from each other to estimate the noise levels. Similarly, two identically but independently acquired standard FFDM images were subtracted to estimate the noise levels. Corrections were applied to remove the excess system noise accumulated during image superimposition in forming the equalized image. PSNRs over the compressed area of breast phantom were computed and used to quantitatively study the effects of exposure equalization on low-contrast performance in digital mammography. Results: We found that the highest achievable PSNR improvement factor was 1.89 for the anthropomorphic breast phantom used in this study. The overall PSNRs were measured to be 79.6 for the FFDM imaging and 107.6 for the simulated SEDM imaging on average in the compressed area of breast phantom, resulting in an average improvement of PSNR by {approx}35% with exposure equalization. We also found that the PSNRs appeared to be largely uniform with exposure equalization, and the standard deviations of PSNRs were estimated to be 10.3 and 7.9 for the FFDM imaging and the simulated SEDM imaging, respectively. The average glandular dose for SEDM was estimated to be 212.5 mrad, {approx}34% lower than that of standard AEC-timed FFDM (323.8 mrad) as a result of exposure equalization for the entire breast phantom. Conclusions: Exposure equalization was found to substantially improve image PSNRs in dense tissue regions and result in more uniform image PSNRs. This improvement may lead to better low-contrast performance in detecting and visualizing soft tissue masses and micro-calcifications in dense tissue areas for breast imaging tasks.« less

MEASUREMENT OF NATURAL RADIONUCLIDES AND EXTERNAL RADIATION EXPOSURE DUE TO FLY ASH FROM A COAL-FIRED POWER PLANT (SPAIN) DEPOSITED ON SOILS. COMPARISON USING TWO DIFFERENT MEASUREMENT TECHNIQUES.

PubMed

Corbacho, J A; Baeza, A

2018-05-17

The evaluation of the radiological impact in soils due to the fly-ash ponds using both in situ techniques and laboratory based measurements is presented. In order to check the in situ techniques capabilities for monitoring this type of industries, a comparison between both techniques was performed. A characterization of external radiation exposure in the fly-ash pond and in its surrounding soils was made. The associated external radiological hazard due to the fly-ash pond has been evaluated. In situ techniques could be used to determine the radiological impact on soils due to fly-ash deposition, but its use could be limited due to the associated uncertainties.

Efficacy of long scleral tunnel technique in preventing Ahmed glaucoma valve tube exposure through conjunctiva.

PubMed

Kugu, Suleyman; Erdogan, Gurkan; Sevim, M Sahin; Ozerturk, Yusuf

2015-01-01

To evaluate the efficacy of long scleral tunnel technique used in Ahmed glaucoma valve (AGV) implantation in preventing tube exposure through conjunctiva. Patients of adult age, who were unresponsive to maximum medical treatment and underwent AGV implantation, were divided into two groups and investigated retrospectively. Group 1 consisted of 40 eyes of 38 patients that underwent surgery by long scleral tunnel technique and Group 2 consisted of 38 eyes of 35 patients that underwent implantation by processed pericardium patch graft method. The mean age was 54.8 ± 14.6 years (range 26-68 years) and the mean follow-up duration was 46.7 ± 19.4 months (range 18-76 months) for the patients in Group 1, whereas the mean age was 58.6 ± 16.7 years (range 32-74 years) and mean follow-up period was 43.6 ± 15.7 months (range 20-72 months) for the patients in Group 2 (p > 0.05). In the course of follow-up, tube exposure was detected in one (2.5%) eye in Group 1 and in three (7.9%) eyes in Group 2 (p = 0.042). Long scleral tunnel technique is beneficial in preventing conjunctival tube exposure in AGV implantation surgery.

Analytical techniques for mechanistic characterization of EUV photoresists

NASA Astrophysics Data System (ADS)

Grzeskowiak, Steven; Narasimhan, Amrit; Murphy, Michael; Ackerman, Christian; Kaminsky, Jake; Brainard, Robert L.; Denbeaux, Greg

2017-03-01

Extreme ultraviolet (EUV, 13.5 nm) lithography is the prospective technology for high volume manufacturing by the microelectronics industry. Significant strides towards achieving adequate EUV source power and availability have been made recently, but a limited rate of improvement in photoresist performance still delays the implementation of EUV. Many fundamental questions remain to be answered about the exposure mechanisms of even the relatively well understood chemically amplified EUV photoresists. Moreover, several groups around the world are developing revolutionary metal-based resists whose EUV exposure mechanisms are even less understood. Here, we describe several evaluation techniques to help elucidate mechanistic details of EUV exposure mechanisms of chemically amplified and metal-based resists. EUV absorption coefficients are determined experimentally by measuring the transmission through a resist coated on a silicon nitride membrane. Photochemistry can be evaluated by monitoring small outgassing reaction products to provide insight into photoacid generator or metal-based resist reactivity. Spectroscopic techniques such as thin-film Fourier transform infrared (FTIR) spectroscopy can measure the chemical state of a photoresist system pre- and post-EUV exposure. Additionally, electrolysis can be used to study the interaction between photoresist components and low energy electrons. Collectively, these techniques improve our current understanding of photomechanisms for several EUV photoresist systems, which is needed to develop new, better performing materials needed for high volume manufacturing.

Needlestick and Sharps Injuries in Dermatologic Surgery: A Review of Preventative Techniques and Post-exposure Protocols

PubMed Central

Monroe, Holly; Orengo, Ida; Rosen, Theodore

2016-01-01

Background: Needlestickand sharps injuries are the leading causes of morbidity in the dermatologicfield. Among medical specialties, surgeons and dermatologists have the highest rates of needlestickand sharps injuries.The high rates of needlestickand sharps injuries in dermatology not only apply to physicians, but also to nurses, physician assistants, and technicians in the demnatologic field. Needlestickand sharps injuries are of great concern due to the monetary, opportunity, social, and emotional costs associated with their occurrence. Objective: A review of preventative techniques and post-exposure protocols for the majortypes of sharps injuries encountered in dermatologic practice. Design: The terms “needle-stick injuryT’sharps injuryTdermatologic surgery? “post-exposure prophylaxis,”and “health-care associated injury” were used in combinations to search the PubMed database. Relevant studies were reviewed for validity and included. Results The authors discuss the major types of sharps injuries that occur in the dermatologic surgery setting and summarize preventative techniques with respect to each type of sharps injury.The authors also summarize and discuss relevant post-exposure protocols in the event of a sharps injury. Conclusion: The adoption of the discussed methods, techniques, practices, and attire can result in the elimination of the vast majority of dermatologic sharps injuries. PMID:27847548

Cadmium: Simulation of environmental control strategies to reduce exposure

NASA Astrophysics Data System (ADS)

Yost, K. J.; Miles, L. J.; Greenkorn, R. A.

1981-07-01

The effects of selected environmental control strategies on human dietary and respiratory exposure to environmental cadmium (Cd) have been simulated. For each control strategy, mean Cd dietary and respiratory exposures are presented for a twenty-year simulation period. Human exposures related to cadmium are associated with both process waste disposal and product disposal. Dietary exposure is by far the dominant mechanism for Cd intake. Dietary exposure related to aqueous discharges is primarily a result of municipal sludge landspreading, whereas that associated with emissions to the atmosphere derives mainly from the deposition on cropland of airborne particulates from product incineration. Only relatively small dietary exposure reductions are possible through restrictions on any single Cd use. Combinations of waste management and environmental control measures promise greater reductions in dietary and respiratory exposure than those achievable through use restrictions.

Arrays of quasi-hexagonally ordered silica nanopillars with independently controlled areal density, diameter and height gradients

NASA Astrophysics Data System (ADS)

Özdemir, Burcin; Huang, Wenting; Plettl, Alfred; Ziemann, Paul

2015-03-01

A consecutive fabrication approach of independently tailored gradients of the topographical parameters distance, diameter and height in arrays of well-ordered nanopillars on smooth SiO2-Si-wafers is presented. For this purpose, previously reported preparation techniques are further developed and combined. First, self-assembly of Au-salt loaded micelles by dip-coating with computer-controlled pulling-out velocities and subsequent hydrogen plasma treatment produce quasi-hexagonally ordered, 2-dimensional arrays of Au nanoparticles (NPs) with unidirectional variations of the interparticle distances along the pulling direction between 50-120 nm. Second, the distance (or areal density) gradient profile received in this way is superimposed with a diameter-controlled gradient profile of the NPs applying a selective photochemical growth technique. For demonstration, a 1D shutter is used for locally defined UV exposure times to prepare Au NP size gradients varying between 12 and 30 nm. Third, these double-gradient NP arrangements serve as etching masks in a following reactive ion etching step delivering arrays of nanopillars. For height gradient generation, the etching time is locally controlled by applying a shutter made from Si wafer piece. Due to the high flexibility of the etching process, the preparation route works on various materials such as cover slips, silicon, silicon oxide, silicon nitride and silicon carbide.

Effects of Lifetime Occupational Pesticide Exposure on Postural Control Among Farmworkers and Non-Farmworkers.

PubMed

Sunwook, Kim; Nussbaum, Maury A; Quandt, Sara A; Laurienti, Paul J; Arcury, Thomas A

2016-02-01

The aim of the study was to assess potential chronic effects of pesticide exposure on postural control, by examining postural balance of farmworkers and non-farmworkers diverse self-reported lifetime exposures. Balance was assessed during quiet upright stance under four experimental conditions (2 visual × 2 cognitive difficulty). Significant differences in baseline balance performance (eyes open without cognitive task) between occupational groups were apparent in postural sway complexity. When adding a cognitive task to the eyes open condition, the influence of lifetime exposure on complexity ratios appeared different between occupational groups. Removing visual information revealed a negative association of lifetime exposure with complexity ratios. Farmworkers and non-farmworkers may use different postural control strategies even when controlling for the level of lifetime pesticide exposure. Long-term exposure can affect somatosensory/vestibular sensory systems and the central processing of sensory information for postural control.

Effects of lifetime occupational pesticide exposure on postural control among farmworkers and non-farmworkers

PubMed Central

Sunwook, Kim; Nussbaum, Maury A.; Quandt, Sara A.; Laurienti, Paul J.; Arcury, Thomas A.

2015-01-01

Objective Assess potential chronic effects of pesticide exposure on postural control, by examining postural balance of farmworkers and non-farmworkers diverse self-reported lifetime exposures. Methods Balance was assessed during quiet upright stance under four experimental conditions (2 visual × 2 cognitive difficulty). Results Significant differences in baseline balance performance (eyes open without cognitive task) between occupational groups were apparent in postural sway complexity. When adding a cognitive task to the eyes open condition, the influence of lifetime exposure on complexity ratios appeared different between occupational groups. Removing visual information revealed a negative association of lifetime exposure with complexity ratios. Conclusions Farmworkers and non-farmworkers may use different postural control strategies even when controlling for the level of lifetime pesticide exposure. Long-term exposure can affect somatosensory/vestibular sensory systems and the central processing of sensory information for postural control. PMID:26849257

REFERENCE VALUES FOR FISH EXPOSURE TO PAH CONTAMINANTS: COMPARISON OF OHIO AND THE MID-ATLANTIC REGION

EPA Science Inventory

Reference values for exposure of wildlife to contaminants are needed to cost effectively determine if a site is contaminated and to rank sites that are above background levels. Epidemiological techniques originally developed for clinical chemistry and for determining exposures t...

ORD research and results using biological end points to detect exposures to contaminants of emerging concern

EPA Science Inventory

For the past nine years the Ecological Exposure Research Division (EERD) has been developing methods for the assessment of EDCs and other contaminants of emerging concern (CECs). These methods include genomic techniques for detecting the presence and potential exposure to human p...

Metal Pollutant Exposure and Behavior Disorders: Implications for School Practices.

ERIC Educational Resources Information Center

Marlowe, Mike

1986-01-01

The article summarizes research on relationships between low (below metal poisoning) metal exposure and childhood behavior disorders. Symptoms, assessment techniques (hair analysis), and environmental and dietary factors that may increase the risk of metal pollutant exposure are described. School programs emphasizing education and the role of…

Intra-field on-product overlay improvement by application of RegC and TWINSCAN corrections

NASA Astrophysics Data System (ADS)

Sharoni, Ofir; Dmitriev, Vladimir; Graitzer, Erez; Perets, Yuval; Gorhad, Kujan; van Haren, Richard; Cekli, Hakki E.; Mulkens, Jan

2015-03-01

The on product overlay specification and Advanced Process Control (APC) is getting extremely challenging particularly after the introduction of multi-patterning applications like Spacer Assisted Double Patterning (SADP) and multipatterning techniques like N-repetitive Litho-Etch steps (LEN, N >= 2). When the latter is considered, most of the intrafield overlay contributors drop out of the overlay budget. This is a direct consequence of the fact that the scanner settings (like dose, illumination settings, etc.) as well as the subsequent processing steps can be made very similar for two consecutive Litho-Etch layers. The major overlay contributor that may require additional attention is the Image Placement Error (IPE). When the inter-layer overlay is considered, controlling the intra-field overlay contribution gets more complicated. In addition to the IPE contribution, the TWINSCANTM lens fingerprint in combination with the exposure settings is going to play a role as well. Generally speaking, two subsequent functional layers have different exposure settings. This results in a (non-reticle) additional overlay contribution. In this paper, we have studied the wafer overlay correction capability by RegC® in addition to the TWINSCANTM intrafield corrections to improve the on product overlay performance. RegC® is a reticle intra-volume laser writing technique that causes a predictable deformation element (RegC® deformation element) inside the quartz (Qz) material of a reticle. This technique enables to post-process an existing reticle to correct for instance for IPE. Alternatively, a pre-determined intra-field fingerprint can be added to the reticle such that it results in a straight field after exposure. This second application might be very powerful to correct for instance for (cold) lens fingerprints that cannot be corrected by the scanner itself. Another possible application is the intra-field processing fingerprint. One should realize that a RegC® treatment of a reticle generally results in global distortion of the reticle. This is not a problem as long as these global distortions can be corrected by the TWINSCANTM system (currently up to the third order). It is anticipated that the combination of the RegC® and the TWINSCANTM corrections act as complementary solutions. These solutions perfectly fit into the ASML Litho InSight (LIS) product in which feedforward and feedback corrections based on YieldStar overlay measurements are used to improve the on product overlay.

Short-term techniques for monitoring coral reefs: Review, results, and recommendations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, G.S.; Hunte, W.

1994-12-31

The health of coral reefs is in question on a global scale. The degradation of reefs has been attributed to both natural (e.g., el nino, crown-of-thorns, and hurricanes) and anthropogenic (e.g., sedimentation, nutrient overloading, oil spills, and thermal pollution) factors. Demonstrating the deleterious effects of lethal factors has not been difficult. However, it has been more difficult to quantitatively link those factors which do not cause rapid coral mortality to reef degradation. Classic techniques, such as cross-transplantation and x-ray analysis of growth bands, have proven to be successful bioassessments of chronic exposure to stressful conditions. The resolution of these techniquesmore » generally limits their usefulness as only long-term exposure (months to years) can provide quantitative differences between impacted and controlled conditions. Short-term monitoring techniques using corals have received relatively little attention from researchers. Two short-term methods have been successfully used to discriminated polluted from less-polluted sites in Barbados. The first is based on adult growth in several coral species. The second focuses on growth and survival of newly-settled juvenile corals. Both methods allowed discrimination in less than two weeks. These methods and others need to be evaluated and standardized in order to permit better, more efficient monitoring of the worlds reefs. Recommendations will be made on what life-history characteristics should be considered when choosing a coral species for use in bioassessment studies.« less

Comparative techniques of medial rectus muscle retraction for endoscopic exposure of the medial intraconal space.

PubMed

Lin, Giant C; Freitag, Suzanne K; Kocharyan, Armine; Yoon, Michael K; Lefebvre, Daniel R; Bleier, Benjamin S

2016-05-01

The medial rectus muscle (MRM) is the medial boundary to the intraconal space of the orbit, and retraction of the MRM is oftentimes necessary for endoscopic removal of intraconal tumors, e.g., orbital hemangioma. We evaluated each of the reported methods of MRM retraction for endoscopic orbital surgery and quantified the degree of intraconal exposure conferred by each method. Eight orbits from four cadaver heads were dissected. In each orbit, medial orbital decompression was performed and the MRM was retracted by using four previously described techniques: (1) external MRM retraction at the globe insertion point by using vessel loop (external group), (2) transseptal MRM retraction by using vessel loop (transseptal group), (3) transchoanal retraction of the MRM by using vessel loop (choanal group), and (4) transseptal four-handed technique by using double ball retraction by a second surgeon (transseptal double ball group). The length, height, and area of exposure of the medial intraconal space were quantified and compared. The average ± standard deviation (SD) anterior-posterior exposures for the external group, transseptal group, and transseptal double ball group were 17.51 ± 3.39 mm, 16.59 ± 4.16 mm, and 18.0 ± 15.25 mm, respectively. The choanal group provided significantly less exposure (12.39 ± 3.44 mm, p = 0.049) than the other groups. The average ± SD vertical exposures for the transseptal group, choanal group, and transseptal double ball group were 12.53 ± 4.38 mm, 13.05 ± 5.86 mm, and 13.57 ± 3.74 mm, respectively. The external group provided significantly less exposure (4.51 ± 1.56 mm, p = 0.0072) than the other groups. The transseptal and transseptal double ball groups provided the greatest total access by surface area (58.88 ± 26.96 mm(2) and 62.94 ± 34.74 mm(2), respectively) compared with the external and choanal groups (34.82 ± 23.37 mm(2) and 43.10 ± 23.68 mm(2), respectively). Although the transseptal trajectory of MRM retraction was optimal, the difference in total area of exposure between the static vessel loop retraction and the dynamic, four-handed technique with double ball instrument retraction was not significant. Of note, the exposure provided by the choanal technique required the surgeon to work both above and below the muscle. Retraction of the MRM toward the choanae provided the least length of exposure, and external retraction exposed the least height and total area. Transseptal MRM retraction was most favorable and provided the largest endoscopic corridor to the medial intraconal space. A four-handed approach for endoscopic intraconal surgery of the orbit may offer advantages in dynamic adjustments in retraction.

Impact of Geocoding Methods on Associations between Long-term Exposure to Urban Air Pollution and Lung Function

PubMed Central

Jacquemin, Bénédicte; Lepeule, Johanna; Boudier, Anne; Arnould, Caroline; Benmerad, Meriem; Chappaz, Claire; Ferran, Joane; Kauffmann, Francine; Morelli, Xavier; Pin, Isabelle; Pison, Christophe; Rios, Isabelle; Temam, Sofia; Künzli, Nino; Slama, Rémy

2013-01-01

Background: Errors in address geocodes may affect estimates of the effects of air pollution on health. Objective: We investigated the impact of four geocoding techniques on the association between urban air pollution estimated with a fine-scale (10 m × 10 m) dispersion model and lung function in adults. Methods: We measured forced expiratory volume in 1 sec (FEV1) and forced vital capacity (FVC) in 354 adult residents of Grenoble, France, who were participants in two well-characterized studies, the Epidemiological Study on the Genetics and Environment on Asthma (EGEA) and the European Community Respiratory Health Survey (ECRHS). Home addresses were geocoded using individual building matching as the reference approach and three spatial interpolation approaches. We used a dispersion model to estimate mean PM10 and nitrogen dioxide concentrations at each participant’s address during the 12 months preceding their lung function measurements. Associations between exposures and lung function parameters were adjusted for individual confounders and same-day exposure to air pollutants. The geocoding techniques were compared with regard to geographical distances between coordinates, exposure estimates, and associations between the estimated exposures and health effects. Results: Median distances between coordinates estimated using the building matching and the three interpolation techniques were 26.4, 27.9, and 35.6 m. Compared with exposure estimates based on building matching, PM10 concentrations based on the three interpolation techniques tended to be overestimated. When building matching was used to estimate exposures, a one-interquartile range increase in PM10 (3.0 μg/m3) was associated with a 3.72-point decrease in FVC% predicted (95% CI: –0.56, –6.88) and a 3.86-point decrease in FEV1% predicted (95% CI: –0.14, –3.24). The magnitude of associations decreased when other geocoding approaches were used [e.g., for FVC% predicted –2.81 (95% CI: –0.26, –5.35) using NavTEQ, or 2.08 (95% CI –4.63, 0.47, p = 0.11) using Google Maps]. Conclusions: Our findings suggest that the choice of geocoding technique may influence estimated health effects when air pollution exposures are estimated using a fine-scale exposure model. Citation: Jacquemin B, Lepeule J, Boudier A, Arnould C, Benmerad M, Chappaz C, Ferran J, Kauffmann F, Morelli X, Pin I, Pison C, Rios I, Temam S, Künzli N, Slama R, Siroux V. 2013. Impact of geocoding methods on associations between long-term exposure to urban air pollution and lung function. Environ Health Perspect 121:1054–1060; http://dx.doi.org/10.1289/ehp.1206016 PMID:23823697

The mouse mammary gland as a sentinel organ: distinguishing 'control' populations with diverse environmental histories.

PubMed

Kolla, SriDurgaDevi; Pokharel, Aastha; Vandenberg, Laura N

2017-03-09

There are numerous examples of laboratory animals that were inadvertently exposed to endocrine disrupting chemicals (EDCs) during the process of conducting experiments. Controlling contaminations in the laboratory is challenging, especially when their source is unknown. Unfortunately, EDC contaminations can interfere with the interpretation of data during toxicological evaluations. We propose that the male CD-1 mouse mammary gland is a sensitive bioassay to evaluate the inadvertent contamination of animal colonies. We evaluated mammary glands collected from two CD-1 mouse populations with distinct environmental histories. Population 1 was born and raised in a commercial laboratory with unknown EDC exposures; Population 2 was the second generation raised in an animal facility with limited exposures to xenoestrogens from caging, feed, etc. Mammary glands were collected from all animals and evaluated using morphometric techniques to quantify morphological characteristics of the mammary gland. Population 1 (with suspected history of environmental chemical exposure) and Population 2 (with known limited history of xenoestrogen exposure) were morphologically distinguishable in adult males, prepubertal females, and pubertal females. Mammary glands from males raised in the commercial animal facility were significantly more developed, with larger ductal trees and more branching points. The appearance of these mammary glands was consistent with prior reports of male mice exposed to low doses of bisphenol A (BPA) during early development. In females, the two populations were morphologically distinct at both prepuberty and puberty, with the most striking differences observed in the number, size, and density of terminal end buds, e.g. highly proliferative structures found in the developing mammary gland. Collectively, these results suggest that the mouse mammary gland has the potential to be used as a sentinel organ to evaluate and distinguish animal colonies raised in different environmental conditions including potential EDC exposures. Our findings could help researchers that wish to perform a posteriori evaluations to determine whether inadvertent contamination with xenoestrogens (and potentially other EDCs) has occurred in their animal colonies, especially after new materials (feed, caging, water bottles) have been introduced. Finally, our results challenge the relatively common practice of using historical controls in toxicological experiments.

High dynamic grayscale lithography with an LED-based micro-image stepper

NASA Astrophysics Data System (ADS)

Eckstein, Hans-Christoph; Zeitner, Uwe D.; Leitel, Robert; Stumpf, Marko; Schleicher, Philipp; Bräuer, Andreas; Tünnermann, Andreas

2016-03-01

We developed a novel LED projection based direct write grayscale lithography system for the generation of optical surface profiles such as micro-lenses, diffractive elements, diffusors, and micro freeforms. The image formation is realized by a LCoS micro-display which is illuminated by a 405 nm UV High Power LED. The image on the display can be demagnified from factors 5x to 100x with an exchangeable lens. By controlling exposure time and LED power, the presented technique enables a highly dynamic dosage control for the exposure of h-line sensitive photo resist. In addition, the LCoS micro-display allows for an intensity control within the micro-image which is particularly advantageous to eliminate surface profile errors from stitching and limited homogeneity from LED illumination. Together with an accurate calibration of the resist response this leads to a superior low surface error of realized profiles below <0.2% RMS. The micro-display is mounted on a 3-axis (XYθ) stage for precise alignment. The substrate is brought into position with an air bearing stage which addresses an area of 500 × 500 mm2 with a positioning accuracy of <100 nm. As the exposure setup performs controlled motion in the z-direction the system to maintain the focal distance and lithographic patterning on non-planar surfaces to some extent. The exposure concept allows a high structure depth of more than 100 μm and a spatial resolution below 1 μm as well as the possibility of very steep sidewalls with angles larger than >80°. Another benefit of the approach is a patterning speed up to 100 cm2/h, which allows fabricating large-scale optics and microstructures in an acceptable time. We present the setup and show examples of micro-structures to demonstrate the performance of the system, namely a refractive freeform array, where the RMS surface deviation does not exceed 0.2% of the total structure depth of 75 μm. Furthermore, we show that this exposure tool is suitable to generate diffractive optical elements as well as freeform optics and arrays with a high aspect ratio and structure depth showing a superior optical performance. Lastly we demonstrate a multi-level diffraction grating on a curved substrate.

SU-F-I-31: Reproducibility of An Automatic Exposure Control Technique in the Low-Dose CT Scan of Cardiac PET/CT Exams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, M; Rosica, D; Agarwal, V

Purpose: Two separate low-dose CT scans are usually performed for attenuation correction of rest and stress N-13 ammonia PET/CT myocardial perfusion imaging (PET/CT). We utilize an automatic exposure control (AEC) technique to reduce CT radiation dose while maintaining perfusion image quality. Our goal is to assess the reproducibility of displayed CT dose index (CTDI) on same-day repeat CT scans (CT1 and CT2). Methods: Retrospectively, we reviewed CT images of PET/CT studies performed on the same day. Low-dose CT utilized AEC technique based on tube current modulation called Smart-mA. The scan parameters were 64 × 0.625mm collimation, 5mm slice thickness, 0.984more » pitch, 1-sec rotation time, 120 kVp, and noise index 50 with a range of 10–200 mA. The scan length matched with PET field of view (FOV) with the heart near the middle of axial FOV. We identified the reference slice number (RS) for an anatomical landmark (carina) and used it to estimate axial shift between two CTs. For patient size, we measured an effective diameter on the reference slice. The effect of patient positioning to CTDI was evaluated using the table height. We calculated the absolute percent difference of the CTDI (%diff) for estimation of the reproducibility. Results: The study included 168 adults with an average body-mass index of 31.72 ± 9.10 (kg/m{sup 2}) and effective diameter was 32.72 ± 4.60 cm. The average CTDI was 1.95 ± 1.40 mGy for CT1 and 1.97 ± 1.42mGy for CT2. The mean %diff was 7.8 ± 6.8%. Linear regression analysis showed a significant correlation between the table height and %diff CTDI. (r=0.82, p<0.001) Conclusion: We have shown for the first time in human subjects, using two same-day CT images, that the AEC technique in low-dose CT is reproducible within 10% and significantly depends on the patient centering.« less

Practical semen analysis: from A to Z

PubMed Central

Brazil, Charlene

2010-01-01

Accurate semen analysis is critical for decisions about patient care, as well as for studies addressing overall changes in semen quality, contraceptive efficacy and effects of toxicant exposure. The standardization of semen analysis is very difficult for many reasons, including the use of subjective techniques with no standards for comparison, poor technician training, problems with proficiency testing and a reluctance to change techniques. The World Health Organization (WHO) Semen handbook (2010) offers a vastly improved set of standardized procedures, all at a level of detail that will preclude most misinterpretations. However, there is a limit to what can be learned from words and pictures alone. A WHO-produced DVD that offers complete demonstrations of each technique along with quality assurance standards for motility, morphology and concentration assessments would enhance the effectiveness of the manual. However, neither the manual nor a DVD will help unless there is general acknowledgement of the critical need to standardize techniques and rigorously pursue quality control to ensure that laboratories actually perform techniques 'according to WHO' instead of merely reporting that they have done so. Unless improvements are made, patient results will continue to be compromised and comparison between studies and laboratories will have limited merit. PMID:20111076

The contribution of Raman spectroscopy to the analytical quality control of cytotoxic drugs in a hospital environment: eliminating the exposure risks for staff members and their work environment.

PubMed

Bourget, Philippe; Amin, Alexandre; Vidal, Fabrice; Merlette, Christophe; Troude, Pénélope; Baillet-Guffroy, Arlette

2014-08-15

The purpose of the study was to perform a comparative analysis of the technical performance, respective costs and environmental effect of two invasive analytical methods (HPLC and UV/visible-FTIR) as compared to a new non-invasive analytical technique (Raman spectroscopy). Three pharmacotherapeutic models were used to compare the analytical performances of the three analytical techniques. Statistical inter-method correlation analysis was performed using non-parametric correlation rank tests. The study's economic component combined calculations relative to the depreciation of the equipment and the estimated cost of an AQC unit of work. In any case, analytical validation parameters of the three techniques were satisfactory, and strong correlations between the two spectroscopic techniques vs. HPLC were found. In addition, Raman spectroscopy was found to be superior as compared to the other techniques for numerous key criteria including a complete safety for operators and their occupational environment, a non-invasive procedure, no need for consumables, and a low operating cost. Finally, Raman spectroscopy appears superior for technical, economic and environmental objectives, as compared with the other invasive analytical methods. Copyright © 2014 Elsevier B.V. All rights reserved.

Histopathological changes in Wistar albino rats exposed to aqueous extract of unripe Carica papaya.

PubMed

Oduola, Taofeeq; Bello, Ibrahim; Idowu, Thomas; Avwioro, Godwin; Adeosun, Ganiyu; Olatubosun, Luqman

2010-05-01

Exposure of animals to xenobiotics may or may not trigger adverse response at cellular levels. Aqueous extract of unripe Carica papaya is consumed by sickle cell patients as antisickling agent in Western Nigeria. This study was undertaken to investigate the effects of Carica papaya on certain organs in Wister albino rats exposed to aqueous extract of unripe Carica papaya. Different doses of aqueous extract of unripe Carica papaya were administered orally daily for 42 days to six groups of rats. At the end of exposure, the animals were sacrificed and tissue sections were prepared from livers, kidneys, hearts and small intestines using standard techniques. Histopathological results showed that no pathological changes were observed in tissue sections of experimental animals when compared with tissue sections of the same organs in control animals. No pathological changes were elicited in the organs of rats exposed to aqueous extract of unripe Carica papaya.

Adaptive DOF for plenoptic cameras

NASA Astrophysics Data System (ADS)

Oberdörster, Alexander; Lensch, Hendrik P. A.

2013-03-01

Plenoptic cameras promise to provide arbitrary re-focusing through a scene after the capture. In practice, however, the refocusing range is limited by the depth of field (DOF) of the plenoptic camera. For the focused plenoptic camera, this range is given by the range of object distances for which the microimages are in focus. We propose a technique of recording light fields with an adaptive depth of focus. Between multiple exposures { or multiple recordings of the light field { the distance between the microlens array (MLA) and the image sensor is adjusted. The depth and quality of focus is chosen by changing the number of exposures and the spacing of the MLA movements. In contrast to traditional cameras, extending the DOF does not necessarily lead to an all-in-focus image. Instead, the refocus range is extended. There is full creative control about the focus depth; images with shallow or selective focus can be generated.

Effects of Copper Oxide Nanoparticles on Antioxidant Enzyme Activities and on Tissue Accumulation of Oreochromis niloticus.

PubMed

Tunçsoy, Mustafa; Duran, Servet; Ay, Özcan; Cicik, Bedii; Erdem, Cahit

2017-09-01

Accumulation of copper oxide nanoparticles (CuO NPs) in gill, liver and muscle tissues of Oreochromis niloticus and its effects on superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GPx) activities in gill and liver tissues were studied after exposing the fish to 20 µg/L Cu over 15 days. Copper levels and enzyme activities in tissues were determined using spectrophotometric (ICP-AES and UV) techniques respectively. No mortality was observed during the experiments. Copper levels increased in gill and liver tissues of O. niloticus compared to control when exposed to CuO NPs whereas exposure to metal had no effect on muscle level at the end of the exposure period. Highest accumulation of copper was observed in liver while no accumulation was detected in muscle tissue. SOD, CAT activities decreased and GPx activity increased in gill and liver tissues when exposed to CuO NPs.

Mediation Analysis: A Practitioner's Guide.

PubMed

VanderWeele, Tyler J

2016-01-01

This article provides an overview of recent developments in mediation analysis, that is, analyses used to assess the relative magnitude of different pathways and mechanisms by which an exposure may affect an outcome. Traditional approaches to mediation in the biomedical and social sciences are described. Attention is given to the confounding assumptions required for a causal interpretation of direct and indirect effect estimates. Methods from the causal inference literature to conduct mediation in the presence of exposure-mediator interactions, binary outcomes, binary mediators, and case-control study designs are presented. Sensitivity analysis techniques for unmeasured confounding and measurement error are introduced. Discussion is given to extensions to time-to-event outcomes and multiple mediators. Further flexible modeling strategies arising from the precise counterfactual definitions of direct and indirect effects are also described. The focus throughout is on methodology that is easily implementable in practice across a broad range of potential applications.

Assessing the Risks for Modern Diagnostic Ultrasound Imaging

NASA Astrophysics Data System (ADS)

William, Jr.

1998-05-01

Some 35 years after Paul-Jacques and Pierre Curie discovered piezoelectricity, ultrasonic imaging was developed by Paul Langevin. During this work, ultrasonic energy was observed to have a detrimental biological effect. These observations were confirmed a decade later by R. W. Wood and A. L. Loomis. It was not until the early 1950s that ultrasonic exposure conditions were controlled and specified so that studies could focus on the mechanisms by which ultrasound influenced biological materials. In the late 1940s, pioneering work was initiated to image the human body by ultrasonic techniques. These engineers and physicians were aware of the deleterious ultrasound effects at sufficiently high levels; this endeavored them to keep the exposure levels reasonably low. Over the past three decades, diagnostic ultrasound has become a sophisticated technology. Yet, our understanding of the potential risks has not changed appreciably. It is very encouraging that human injury has never been attributed to clinical practice of diagnostic ultrasound.

Company-level, semi-quantitative assessment of occupational styrene exposure when individual data are not available.

PubMed

Kolstad, Henrik A; Sønderskov, Jette; Burstyn, Igor

2005-03-01

In epidemiological research, self-reported information about determinants and levels of occupational exposures is difficult to obtain, especially if the disease under study has a high mortality rate or follow-up has exceeded several years. In this paper, we present a semi-quantitative exposure assessment strategy for nested case-control studies of styrene exposure among workers of the Danish reinforced plastics industry when no information on job title, task or other indicators of individual exposure were readily available from cases and controls. The strategy takes advantage of the variability in styrene exposure level and styrene exposure probability across companies. The study comprised 1522 cases of selected malignancies and neurodegenerative diseases and controls employed in 230 reinforced plastics companies and other related industries. Between 1960 and 1996, 3057 measurements of styrene exposure level obtained from 191 companies, were identified. Mixed effects models were used to estimate expected styrene exposure levels by production characteristics for all companies. Styrene exposure probability within each company was estimated for all but three cases and controls from the fraction of laminators, which was reported by a sample of 945 living colleagues of the cases and controls and by employers and dealers of plastic raw materials. The estimates were validated from a subset of 427 living cases and controls that reported their own work as laminators in the industry. We computed styrene exposure scores that integrated estimated styrene exposure level and styrene exposure probability. Product (boats), process (hand and spray lamination) and calendar year period were the major determinants of styrene exposure level. Within-company styrene exposure variability increased by calendar year and was accounted for when computing the styrene exposure scores. Exposure probability estimates based on colleagues' reports showed the highest predictive values in the validation test, which also indicated that up to 67% of the workers were correctly classified into a styrene-exposed job. Styrene exposure scores declined about 10-fold from the 1960s-1990s. This exposure assessment approach may be justified in other industries, and especially in industries dominated by small companies with simple exposure conditions.

Strategies for controlling item exposure in computerized adaptive testing with the partial credit model.

PubMed

Davis, Laurie Laughlin; Dodd, Barbara G

2008-01-01

Exposure control research with polytomous item pools has determined that randomization procedures can be very effective for controlling test security in computerized adaptive testing (CAT). The current study investigated the performance of four procedures for controlling item exposure in a CAT under the partial credit model. In addition to a no exposure control baseline condition, the Kingsbury-Zara, modified-within-.10-logits, Sympson-Hetter, and conditional Sympson-Hetter procedures were implemented to control exposure rates. The Kingsbury-Zara and the modified-within-.10-logits procedures were implemented with 3 and 6 item candidate conditions. The results show that the Kingsbury-Zara and modified-within-.10-logits procedures with 6 item candidates performed as well as the conditional Sympson-Hetter in terms of exposure rates, overlap rates, and pool utilization. These two procedures are strongly recommended for use with partial credit CATs due to their simplicity and strength of their results.

Assessing residential exposure to urban noise using environmental models: does the size of the local living neighborhood matter?

PubMed

Tenailleau, Quentin M; Bernard, Nadine; Pujol, Sophie; Houot, Hélène; Joly, Daniel; Mauny, Frédéric

2015-01-01

Environmental epidemiological studies rely on the quantification of the exposure level in a surface defined as the subject's exposure area. For residential exposure, this area is often the subject's neighborhood. However, the variability of the size and nature of the neighborhoods makes comparison of the findings across studies difficult. This article examines the impact of the neighborhood's definition on environmental noise exposure levels obtained from four commonly used sampling techniques: address point, façade, buffers, and official zoning. A high-definition noise model, built on a middle-sized French city, has been used to estimate LAeq,24 h exposure in the vicinity of 10,825 residential buildings. Twelve noise exposure indicators have been used to assess inhabitants' exposure. Influence of urban environmental factors was analyzed using multilevel modeling. When the sampled area increases, the average exposure increases (+3.9 dB), whereas the SD decreases (-1.6 dB) (P<0.01). Most of the indicators differ statistically. When comparing indicators from the 50-m and 400-m radius buffers, the assigned LAeq,24 h level varies across buildings from -9.4 to +22.3 dB. This variation is influenced by urban environmental characteristics (P<0.01). On the basis of this study's findings, sampling technique, neighborhood size, and environmental composition should be carefully considered in further exposure studies.

Plasma impact on structural, morphological and optical properties of copper acetylacetonate thin films

NASA Astrophysics Data System (ADS)

Abdel-Khalek, H.; El-Samahi, M. I.; El-Mahalawy, Ahmed M.

2018-06-01

The influence of plasma exposure on structural, morphological and optical properties of copper (II) acetylacetonate thin films deposited by thermal evaporation technique was investigated. Copper (II) acetylacetonate as-grown thin films were exposed to the atmospheric plasma for different times. The exposure of as-grown cu(acac)2 thin film to atmospheric plasma for 5 min modified its structural, morphological and optical properties. The effect of plasma exposure on structure and roughness of cu(acac)2 thin films was evaluated by XRD and AFM techniques, respectively. The XRD results showed an increment in crystallinity due to exposure for 5 min, but, when the exposure time reaches 10 min, the film was transformed to an amorphous state. The AFM results revealed a strong modification of films roughness when the average roughness decreased from 63.35 nm to 1 nm as a result of interaction with plasma. The optical properties of as-grown and plasma exposured cu(acac)2 thin films were studied using spectrophotometric method. The exposure of cu(acac)2 thin films to plasma produced the indirect energy gap decrease from 3.20 eV to 2.67 eV for 10 min exposure time. The dispersion parameters were evaluated in terms of single oscillator model for as-grown and plasma exposured thin films. The influence of plasma exposure on third order optical susceptibility was studied.

Exposure to pesticides and the associated human health effects.

PubMed

Kim, Ki-Hyun; Kabir, Ehsanul; Jahan, Shamin Ara

2017-01-01

Pesticides are used widely to control weeds and insect infestation in agricultural fields and various pests and disease carriers (e.g., mosquitoes, ticks, rats, and mice) in houses, offices, malls, and streets. As the modes of action for pesticides are not species-specific, concerns have been raised about environmental risks associated with their exposure through various routes (e.g., residues in food and drinking water). Although such hazards range from short-term (e.g., skin and eye irritation, headaches, dizziness, and nausea) to chronic impacts (e.g., cancer, asthma, and diabetes), their risks are difficult to elucidate due to the involvement of various factors (e.g., period and level of exposure, type of pesticide (regarding toxicity and persistence), and the environmental characteristics of the affected areas). There are no groups in the human population that are completely unexposed to pesticides while most diseases are multi-causal to add considerable complexity to public health assessments. Hence, development of eco-friendly pesticide alternatives (e.g., EcoSMART) and Integrated Pest Management (IPM) techniques is desirable to reduce the impacts of pesticides. This paper was hence organized to present a comprehensive review on pesticides with respect to their types, environmental distribution, routes of exposure, and health impacts. Copyright © 2016 Elsevier B.V. All rights reserved.

Effects of subchronic malathion exposure on the pharmacokinetic disposition of pefloxacin.

PubMed

Suresh Babu, N; Malik, J K; Rao, G S; Aggarwal, Manoj; Ranganathan, V

2006-09-01

Malathion is one of the most extensively used organophosphorus pesticides applied in agriculture, mosquito eradication and in the control of animal ectoparasites and human body lice. The widespread use of malathion has raised concern over its potential to cause untoward health effects in humans, animals and birds. Malathion inhibits cytochrome P450 monooxygenases and has the potential to alter pharmacokinetic profiles of therapeutic agents that are metabolized in the liver. The present study was undertaken to evaluate the impact of subchronic exposure of malathion on the pharmacokinetic disposition of pefloxacin. Chickens were given either normal diet or malathion through food at a concentration of 1000ppm for 28 days. Subsequently, pefloxacin was administered either intravenously or orally (control) to birds fed normal diet and orally to malathion-exposed chickens at a dosage of 10mgkg(-1) body weight. Blood samples were drawn from the brachial vein at predetermined time intervals after drug administration. Plasma was separated and analyzed for pefloxacin by reverse-phase high performance liquid chromatography. The plasma concentration-time data were analyzed by non-compartmental techniques. Following intravenous administration of pefloxacin, elimination half-life (t(1/2β)), area under the plasma concentration-time curve (AUC) and mean residence time (MRT) were 8.2±0.7h, 66±9μghml(-1) and 10.5±1.1h, respectively, and when the drug was administered orally, the respective values of pharmacokinetic parameters were 8.2±0.4h, 31±3.1μghml(-1) and 11.7±0.6h. Malathion exposure significantly increased maximum plasma drug concentration, t(1/2β), AUC and MRT of pefloxacin to 54, 22, 117 and 37% of control, respectively. These findings provide evidence that subchronic malathion exposure markedly influences the elimination kinetics of pefloxacin which may be due to malathion-mediated inhibition of metabolism of pefloxacin.

Characterization of nanosecond pulse electrical field shock waves using imaging techniques

NASA Astrophysics Data System (ADS)

Mimun, L. Chris; Ibey, Bennett L.; Roth, Caleb C.; Barnes, Ronald A.; Sardar, Dhiraj K.; Beier, Hope T.

2015-03-01

Nanosecond pulsed electric fields (nsPEF) cause the formation of small pores, termed nanopores, in the membrane of cells. Current nanoporation models treat nsPEF exposure as a purely electromagnetic phenomenon, but recent publications showing pressure transients, ROS production, temperature gradients, and pH waves suggest the stimulus may be physically and chemically multifactorial causing elicitation of diverse biological conditions and stressors. Our research group's goal is to quantify the breadth and participation of these stressors generated during nsPEF exposure and determine their relative importance to the observed cellular response. In this paper, we used advanced imaging techniques to identify a possible source of nsPEF-induced acoustic shock waves. nsPEFs were delivered in an aqueous media via a pair of 125 μm tungsten electrodes separated by 100 μm, mirroring our previously published cellular exposure experiments. To visualize any pressure transients emanating from the electrodes or surrounding medium, we used the Schlieren imaging technique. Resulting images and measurements confirmed that mechanical pressure waves and electrode-based stresses are formed during nsPEF, resulting in a clearer understanding of the whole exposure dosimetry. This information will be used to better quantify the impact of nsPEF-induced acoustic shock waves on cells, and has provided further evidence of non-electrical-field induced exposures for elicitation of bioieffects.

An overview of the characterization of occupational exposure to nanoaerosols in workplaces

NASA Astrophysics Data System (ADS)

Castellano, Paola; Ferrante, Riccardo; Curini, Roberta; Canepari, Silvia

2009-05-01

Currently, there is a lack of standardized sampling and metric methods that can be applied to measure the level of exposure to nanosized aerosols. Therefore, any attempt to characterize exposure to nanoparticles (NP) in a workplace must involve a multifaceted approach characterized by different sampling and analytical techniques to measure all relevant characteristics of NP exposure. Furthermore, as NP aerosols are always complex mixtures of multiple origins, sampling and analytical methods need to be improved to selectively evaluate the apportionment from specific sources to the final nanomaterials. An open question at the world's level is how to relate specific toxic effects of NP with one or more among several different parameters (such as particle size, mass, composition, surface area, number concentration, aggregation or agglomeration state, water solubility and surface chemistry). As the evaluation of occupational exposure to NP in workplaces needs dimensional and chemical characterization, the main problem is the choice of the sampling and dimensional separation techniques. Therefore a convenient approach to allow a satisfactory risk assessment could be the contemporary use of different sampling and measuring techniques for particles with known toxicity in selected workplaces. Despite the lack of specific NP exposure limit values, exposure metrics, appropriate to nanoaerosols, are discussed in the Technical Report ISO/TR 27628:2007 with the aim to enable occupational hygienists to characterize and monitor nanoaerosols in workplaces. Moreover, NIOSH has developed the Document Approaches to Safe Nanotechnology (intended to be an information exchange with NIOSH) in order to address current and future research needs to understanding the potential risks that nanotechnology may have to workers.

Prevention and management of intraoperative crisis in VATS and open chest surgery: how to avoid emergency conversion.

PubMed

Safdie, Fernando M; Sanchez, Manuel Villa; Sarkaria, Inderpal S

2017-01-01

Video assisted thoracic surgery (VATS) has become a routinely utilized approach to complex procedures of the chest, such as pulmonary resection. It has been associated with decreased postoperative pain, shorter length of stay and lower incidence of complications such as pneumonia. Limitations to this modality may include limited exposure, lack of tactile feedback, and a two-dimensional view of the surgical field. Furthermore, the lack of an open incision may incur technical challenges in preventing and controlling operative misadventures leading to major hemorrhage or other intraoperative emergencies. While these events may occur in the best of circumstances, prevention strategies are the primary means of avoiding these injuries. Unplanned conversions for major intraoperative bleeding or airway injury during general thoracic surgical procedures are relatively rare and often can be avoided with careful preoperative planning, review of relevant imaging, and meticulous surgical technique. When these events occur, a pre-planned, methodical response with initial control of bleeding, assessment of injury, and appropriate repair and/or salvage procedures are necessary to maximize outcomes. The surgeon should be well versed in injury-specific incisions and approaches to maximize adequate exposure and when feasible, allow completion of the index operation. Decisions to continue with a minimally invasive approach should consider the comfort and experience level of the surgeon with these techniques, and the relative benefit gained against the risk incurred to the patient. These algorithms may be expected to shift in the future with increasing sophistication and capabilities of minimally invasive technologies and approaches.

Anaesthesia for electroconvulsive therapy: An overview with an update on its role in potentiating electroconvulsive therapy

PubMed Central

Kadiyala, Pavan Kumar; Kadiyala, Lakshmi Deepthi

2017-01-01

Despite advances in pharmacotherapy, electroconvulsive therapy (ECT) remains a mainstay treatment option in psychiatry since its introduction in 1930s. It can be used primarily in severe illnesses when there is an urgent need for treatment or secondarily after failure or intolerance to pharmacotherapy. The 'unmodified' technique of ECT was practised initially, with a high incidence of musculoskeletal complications. Several modifications including general anaesthesia and muscle relaxation are used to increase the safety and patient acceptability of ECT. Various anaesthetic techniques including medications are considered to provide adequate therapeutic seizure, simultaneously controlling seizure-induced haemodynamic changes and side effects. A brief review of literature on choice of these anaesthetic techniques is discussed. This article is intended to reinforce the knowledge of clinicians, who may have limited exposure to ECT procedure. Importance is given to the recent updates on the role of induction agents in potentiating therapeutic response to ECT in psychiatric disorders. PMID:28584345

Analysis of leading edge and trailing edge cover glass samples before and after treatment with advanced satellite contamination removal techniques

NASA Technical Reports Server (NTRS)

Hotaling, S. P.

1993-01-01

Two samples from Long Duration Exposure Facility (LDEF) experiment M0003-4 were analyzed for molecular and particulate contamination prior to and following treatment with advanced satellite contamination removal techniques (CO2 gas/solid jet spray and oxygen ion beam). The pre- and post-cleaning measurements and analyses are presented. The jet spray removed particulates in seconds. The low energy reactive oxygen ion beam removed 5,000 A of photo polymerized organic hydrocarbon contamination in less than 1 hour. Spectroscopic analytical techniques were applied to the analysis of cleaning efficiency including: Fourier transform infrared, Auger, x ray photoemissions, energy dispersive x ray, and ultraviolet/visible. The results of this work suggest that the contamination studied here was due to spacecraft self-contamination enhanced by atomic oxygen plasma dynamics and solar UV radiation. These results also suggest the efficacy for the jet spray and ion beam contamination control technologies for spacecraft optical surfaces.

[A comprehensive approach to designing of magnetotherapy techniques based on the Atos device].

PubMed

Raĭgorodskiĭ, Iu M; Semiachkin, G P; Tatarenko, D A

1995-01-01

The paper determines how to apply a comprehensive approach to designing magnetic therapeutical techniques based on concomitant exposures to two or more physical factors. It shows the advantages of the running pattern of a magnetic field and photostimuli in terms of optimization of physiotherapeutical exposures. An Atos apparatus with an Amblio-1 attachment is used as an example to demonstrate how to apply the comprehensive approach for ophthalmology.

Evaluation of protective gloves and working techniques for reducing hand-arm vibration exposure in the workplace.

PubMed

Milosevic, Matija; McConville, Kristiina M Valter

2012-01-01

Operation of handheld power tools results in exposure to hand-arm vibrations, which over time lead to numerous health complications. The objective of this study was to evaluate protective equipment and working techniques for the reduction of vibration exposure. Vibration transmissions were recorded during different work techniques: with one- and two-handed grip, while wearing protective gloves (standard, air and anti-vibration gloves) and while holding a foam-covered tool handle. The effect was examined by analyzing the reduction of transmitted vibrations at the wrist. The vibration transmission was recorded with a portable device using a triaxial accelerometer. The results suggest large and significant reductions of vibration with appropriate safety equipment. Reductions of 85.6% were achieved when anti-vibration gloves were used. Our results indicated that transmitted vibrations were affected by several factors and could be measured and significantly reduced.

Is Weight-Based Adjustment of Automatic Exposure Control Necessary for the Reduction of Chest CT Radiation Dose?

PubMed Central

Prakash, Priyanka; Gilman, Matthew D.; Shepard, Jo-Anne O.; Digumarthy, Subba R.

2010-01-01

Objective To assess the effects of radiation dose reduction in the chest CT using a weight-based adjustment of the automatic exposure control (AEC) technique. Materials and Methods With Institutional Review Board Approval, 60 patients (mean age, 59.1 years; M:F = 35:25) and 57 weight-matched patients (mean age, 52.3 years, M:F = 25:32) were scanned using a weight-adjusted AEC and non-weight-adjusted AEC, respectively on a 64-slice multidetector CT with a 0.984:1 pitch, 0.5 second rotation time, 40 mm table feed/rotation, and 2.5 mm section thickness. Patients were categorized into 3 weight categories; < 60 kg (n = 17), 60-90 kg (n = 52), and > 90 kg (n = 48). Patient weights, scanning parameters, CT dose index volumes (CTDIvol) and dose length product (DLP) were recorded, while effective dose (ED) was estimated. Image noise was measured in the descending thoracic aorta. Data were analyzed using a standard statistical package (SAS/STAT) (Version 9.1, SAS institute Inc, Cary, NC). Results Compared to the non-weight-adjusted AEC, the weight-adjusted AEC technique resulted in an average decrease of 29% in CTDIvol and a 27% effective dose reduction (p < 0.0001). With weight-adjusted AEC, the CTDIvol decreased to 15.8, 15.9, and 27.3 mGy for the < 60, 60-90 and > 91 kg weight groups, respectively, compared to 20.3, 27.9 and 32.8 mGy, with non-weight-adjusted AEC. No significant difference was observed for objective image noise between the chest CT acquired with the non-weight-adjusted (15.0 ± 3.1) and weight-adjusted (16.1 ± 5.6) AEC techniques (p > 0.05). Conclusion The results of this study suggest that AEC should be tailored according to patient weight. Without weight-based adjustment of AEC, patients are exposed to a 17 - 43% higher radiation-dose from a chest CT. PMID:20046494

Is weight-based adjustment of automatic exposure control necessary for the reduction of chest CT radiation dose?

PubMed

Prakash, Priyanka; Kalra, Mannudeep K; Gilman, Matthew D; Shepard, Jo-Anne O; Digumarthy, Subba R

2010-01-01

To assess the effects of radiation dose reduction in the chest CT using a weight-based adjustment of the automatic exposure control (AEC) technique. With Institutional Review Board Approval, 60 patients (mean age, 59.1 years; M:F = 35:25) and 57 weight-matched patients (mean age, 52.3 years, M:F = 25:32) were scanned using a weight-adjusted AEC and non-weight-adjusted AEC, respectively on a 64-slice multidetector CT with a 0.984:1 pitch, 0.5 second rotation time, 40 mm table feed/rotation, and 2.5 mm section thickness. Patients were categorized into 3 weight categories; < 60 kg (n = 17), 60-90 kg (n = 52), and > 90 kg (n = 48). Patient weights, scanning parameters, CT dose index volumes (CTDIvol) and dose length product (DLP) were recorded, while effective dose (ED) was estimated. Image noise was measured in the descending thoracic aorta. Data were analyzed using a standard statistical package (SAS/STAT) (Version 9.1, SAS institute Inc, Cary, NC). Compared to the non-weight-adjusted AEC, the weight-adjusted AEC technique resulted in an average decrease of 29% in CTDIvol and a 27% effective dose reduction (p < 0.0001). With weight-adjusted AEC, the CTDIvol decreased to 15.8, 15.9, and 27.3 mGy for the < 60, 60-90 and > 91 kg weight groups, respectively, compared to 20.3, 27.9 and 32.8 mGy, with non-weight-adjusted AEC. No significant difference was observed for objective image noise between the chest CT acquired with the non-weight-adjusted (15.0 +/- 3.1) and weight-adjusted (16.1 +/- 5.6) AEC techniques (p > 0.05). The results of this study suggest that AEC should be tailored according to patient weight. Without weight-based adjustment of AEC, patients are exposed to a 17 - 43% higher radiation-dose from a chest CT.

Effectiveness of the bucco-lingual technique within a school-based supervised toothbrushing program on preventing caries: a randomized controlled trial

PubMed Central

2011-01-01

Background Supervised toothbrushing programs using fluoride dentifrice have reduced caries increment. However there is no information about the effectiveness of the professional cross-brushing technique within a community intervention. The aim was to assess if the bucco-lingual technique can increase the effectiveness of a school-based supervised toothbrushing program on preventing caries. Methods A randomized double-blinded controlled community intervention trial to be analyzed at an individual level was conducted in a Brazilian low-income fluoridated area. Six preschools were randomly assigned to the test and control groups and 284 five-year-old children presenting at least one permanent molar with emerged/sound occlusal surface participated. In control group, oral health education and dental plaque dying followed by toothbrushing with fluoride dentifrice supervised directly by a dental assistant, was developed four times per year. At the remaining school days the children brushed their teeth under indirect supervising of the teachers. In test group, children also underwent a professional cross-brushing on surfaces of first permanent molar rendered by a specially trained dental assistant five times per year. Enamel and dentin caries were recorded on buccal, occlusal and lingual surfaces of permanent molars during 18-month follow-up. Exposure time of surfaces was calculated and incidence density ratio was estimated using Poisson regression model. Results Difference of 21.6 lesions per 1,000 children between control and test groups was observed. Among boys whose caries risk was higher compared to girls, incidence density was 50% lower in test group (p = 0.016). Conclusion Modified program was effective among the boys. It is licit to project a relevant effect in a larger period suggesting in a broader population substantial reduction of dental care needs. Trial registration ISRCTN18548869. PMID:21426572

Effects of Graduated Exposure with Feedback of Exposure Times on Snake Phobias

ERIC Educational Resources Information Center

Becker, Horst G.; Costello, C. G.

1975-01-01

The subject-controlled graduated exposure of a snake with feedback of exposure times resulted in significantly less avoidance behaviors for snake-phobic subjects than for control snake-phobic subjects who did not receive therapy. (Author)

Hydrogels with Spatially and Temporally Controlled Properties to Control Cellular Interactions

NASA Astrophysics Data System (ADS)

Burdick, Jason

2011-03-01

Stem cells (e.g., mesenchymal stem cells, MSCs) respond to many cues from their microenvironment, which may include chemical signals, mechanics, and topography. Importantly, these cues may be incorporated into scaffolding to control stem cell differentiation and optimize their ability to produce tissues in regenerative medicine. Despite the significant amount of work in this area, the materials have been primarily static and uniform. To this end, we have developed a sequential crosslinking process that relies on our ability to crosslinked functional biopolymers (e.g., methacrylated hyaluronic acid, HA) in two steps, namely a Michael-type addition reaction to partially consume reactive groups and then a light-initiated free-radical polymerization to further crosslink the material. With light exposure during the second step comes control over the material in space (via masks and lasers) and time (via intermittent light exposure). We are applying this technique for numerous applications. For example, when the HA hydrogels are crosslinked with MMP degradable peptides with thiol termini during the first step, a material that can be degraded by cells is obtained. However, cell-mediated degradation is obstructed with the introduction of kinetic chains during the second step, leading to spatially controlled cell degradability. Due to the influence of cellular spreading on MSC differentiation, we have controlled cell fates by controlling their spread ability, for instance towards osteoblasts in spread areas and adipocytes when cell remained rounded. We are also using the process of stiffening with time to investigate mechanically induced differentiation, particularly in materials with evolving mechanics. Overall, these advanced HA hydrogels provide us the opportunity to investigate diverse and controlled material properties on MSC interactions.

Impact of organic solvents and environmental pollutants on the physiological function in petrol filling workers.

PubMed

Uzma, Nazia; Salar, B M Khaja Mohinuddin; Kumar, B Santhosh; Aziz, Nusrat; David, M Anthony; Reddy, V Devender

2008-09-01

Long term exposure to solvents and air pollutants can lead to deleterious effects on respiratory, haematological and thyroid functioning. The aim of this study was to investigate whether chronic exposure to solvents like benzene and pollutants like carbon monoxide in petrol filling workers had adverse effect on blood parameters, thyroid and respiratory functions. The study group consisted of 42 healthy, non-smoker petrol filling workers, aged 20-50 years with work (exposure) duration from 2-15 years while 36 healthy subjects of the same age group served as controls. Physical examination and measurement of pulmonary functions by portable electronic spirometer were performed. Complete blood pictures (CBP) were determined by normal haematology lab procedure and hormones by Chemiluminescence immunoassay (CLIA) light absorption techniques. There was a significant decrease in the lung volumes and capacities; the restrictive pattern was more prevalent in the workers when compared with the control groups. But in the workers exposed for long period (more than 10 years) the restrictive pattern was changed to mixed pattern. A significant increase in haemoglobin (Hb) (>16 mg %) and red blood cells (RBC) (5.4 million cells/mm3) were observed in workers with longer period of exposure when compared with the control subjects (14.483 mg% and 4.83 million cells/mm3 for Hb and RBC respectively). White blood cell count except eosinophils and platelets were significantly lower in workers compared to controls. Marked increase in the tetra iodothyroinine (T4), free thyroxine (T4F) level and significant decrease in thyroid stimulating hormones (TSH), and tri-iodothyronine (T3) were observed between long term exposed and non-exposed groups. Till now researchers focused only on the effect of solvents in workers professionally exposed to solvents without considering the effect of concomittant air pollution. The result obtained from present study indicates that there is a significant toxic effect of solvents and air pollutants on workers exposed for longer duration. Improved detection and prevention technologies are needed to answer environmentally related health questions for petrol filling workers.

Mammalian Toxicology Testing: Problem Definition Study, Technical Plan.

DTIC Science & Technology

1981-03-01

Acute Oral Exposure Area, Rzdent 2. Subchrcnic Oral Exposure Area, .odent 3. Chronic Oral Exposure Area, Rodent 4. Subchronic Oral Eposure Area, "og...Alarms Fire Extinguisher First Aid Fiscal Year Record Fixtures (See Jigs, Fixtures & Molds Control System) Food Preparation/Blending Forms Control...Insurance Invoicing (See Bookkeeping) Janitorial Service Jigs, Fixtures & Molds Control System Key Control System Keypunch Control System Label

Elucidating Microbial Adaptation Dynamics via Autonomous Exposure and Sampling

NASA Astrophysics Data System (ADS)

Grace, J. M.; Verseux, C.; Gentry, D.; Moffet, A.; Thayabaran, R.; Wong, N.; Rothschild, L.

2013-12-01

The adaptation of micro-organisms to their environments is a complex process of interaction between the pressures of the environment and of competition. Reducing this multifactorial process to environmental exposure in the laboratory is a common tool for elucidating individual mechanisms of evolution, such as mutation rates[Wielgoss et al., 2013]. Although such studies inform fundamental questions about the way adaptation and even speciation occur, they are often limited by labor-intensive manual techniques[Wassmann et al., 2010]. Current methods for controlled study of microbial adaptation limit the length of time, the depth of collected data, and the breadth of applied environmental conditions. Small idiosyncrasies in manual techniques can have large effects on outcomes; for example, there are significant variations in induced radiation resistances following similar repeated exposure protocols[Alcántara-Díaz et al., 2004; Goldman and Travisano, 2011]. We describe here a project under development to allow rapid cycling of multiple types of microbial environmental exposure. The system allows continuous autonomous monitoring and data collection of both single species and sampled communities, independently and concurrently providing multiple types of controlled environmental pressure (temperature, radiation, chemical presence or absence, and so on) to a microbial community in dynamic response to the ecosystem's current status. When combined with DNA sequencing and extraction, such a controlled environment can cast light on microbial functional development, population dynamics, inter- and intra-species competition, and microbe-environment interaction. The project's goal is to allow rapid, repeatable iteration of studies of both natural and artificial microbial adaptation. As an example, the same system can be used both to increase the pH of a wet soil aliquot over time while periodically sampling it for genetic activity analysis, or to repeatedly expose a culture of bacteria to the presence of a toxic metal, automatically adjusting the level of toxicity based on the number or growth rate of surviving cells. We are on our second prototype iteration, with demonstrated functions of microbial growth monitoring and dynamic exposure to UV-C radiation and temperature. We plan to add functionality for general chemical presence or absence by Nov. 2013. By making the project low-cost and open-source, we hope to encourage others to use it as a basis for future development of a common microbial environmental adaptation testbed. References: Alcantara-Diaz, D. et al. (2004), Divergent adaptation of Escherichia coli to cyclic ultraviolet light exposures, Mutagenesis, 19(5), 349-354, doi:10.1093/mutage/geh039. Goldman, R. P., and Travisano, M. (2011), Experimental evolution of ultraviolet radiation resistance in Escherichia coli, Evolution, 65(12), 3486-3498, doi:10.1111/j.1558-5646.2011.01438.x. Wassmann, M. et al. (2010), Adaptation of Bacillus subtilis cells to Archean-like UV climate: relevant hints of microbial evolution to remarkably increased radiation resistance, Astrobiology, 10(6), 605-615, doi:10.1089/ast.2009.0455. Wielgoss, S. et al. (2013), Mutation rate dynamics in a bacterial population reflect tension between adaptation and genetic load, Proc Natl Acad Sci USA, 110(1), 222-227, doi:10.1073/pnas.1219574110.

Comparative Benchmark Dose Modeling as a Tool to Make the First Estimate of Safe Human Exposure Levels to Lunar Dust

NASA Technical Reports Server (NTRS)

James, John T.; Lam, Chiu-wing; Scully, Robert R.

2013-01-01

Brief exposures of Apollo Astronauts to lunar dust occasionally elicited upper respiratory irritation; however, no limits were ever set for prolonged exposure ot lunar dust. Habitats for exploration, whether mobile of fixed must be designed to limit human exposure to lunar dust to safe levels. We have used a new technique we call Comparative Benchmark Dose Modeling to estimate safe exposure limits for lunar dust collected during the Apollo 14 mission.

A Bayesian Semiparametric Approach for Incorporating Longitudinal Information on Exposure History for Inference in Case-Control Studies

PubMed Central

Bhadra, Dhiman; Daniels, Michael J.; Kim, Sungduk; Ghosh, Malay; Mukherjee, Bhramar

2014-01-01

In a typical case-control study, exposure information is collected at a single time-point for the cases and controls. However, case-control studies are often embedded in existing cohort studies containing a wealth of longitudinal exposure history on the participants. Recent medical studies have indicated that incorporating past exposure history, or a constructed summary measure of cumulative exposure derived from the past exposure history, when available, may lead to more precise and clinically meaningful estimates of the disease risk. In this paper, we propose a flexible Bayesian semiparametric approach to model the longitudinal exposure profiles of the cases and controls and then use measures of cumulative exposure based on a weighted integral of this trajectory in the final disease risk model. The estimation is done via a joint likelihood. In the construction of the cumulative exposure summary, we introduce an influence function, a smooth function of time to characterize the association pattern of the exposure profile on the disease status with different time windows potentially having differential influence/weights. This enables us to analyze how the present disease status of a subject is influenced by his/her past exposure history conditional on the current ones. The joint likelihood formulation allows us to properly account for uncertainties associated with both stages of the estimation process in an integrated manner. Analysis is carried out in a hierarchical Bayesian framework using Reversible jump Markov chain Monte Carlo (RJMCMC) algorithms. The proposed methodology is motivated by, and applied to a case-control study of prostate cancer where longitudinal biomarker information is available for the cases and controls. PMID:22313248

Radiation exposure in X-ray-based imaging techniques used in osteoporosis

PubMed Central

Adams, Judith E.; Guglielmi, Giuseppe; Link, Thomas M.

2010-01-01

Recent advances in medical X-ray imaging have enabled the development of new techniques capable of assessing not only bone quantity but also structure. This article provides (a) a brief review of the current X-ray methods used for quantitative assessment of the skeleton, (b) data on the levels of radiation exposure associated with these methods and (c) information about radiation safety issues. Radiation doses associated with dual-energy X-ray absorptiometry are very low. However, as with any X-ray imaging technique, each particular examination must always be clinically justified. When an examination is justified, the emphasis must be on dose optimisation of imaging protocols. Dose optimisation is more important for paediatric examinations because children are more vulnerable to radiation than adults. Methods based on multi-detector CT (MDCT) are associated with higher radiation doses. New 3D volumetric hip and spine quantitative computed tomography (QCT) techniques and high-resolution MDCT for evaluation of bone structure deliver doses to patients from 1 to 3 mSv. Low-dose protocols are needed to reduce radiation exposure from these methods and minimise associated health risks. PMID:20559834

Modulate chopper technique used in pyroelectric uncooled focal plane array thermal imager

NASA Astrophysics Data System (ADS)

He, Yuqing; Jin, Weiqi; Liu, Guangrong; Gao, Zhiyun; Wang, Xia; Wang, Lingxue

2002-09-01

Pyroelectric uncooled focal plane array (FPA) thermal imager has the advantages of low cost, small size, high responsibility and can work under room temperature, so it has great progress in recent years. As a matched technique, the modulate chopper has become one of the key techniques in uncooled FPA thermal imaging system. Now the Archimedes spiral cord chopper technique is mostly used. When it works, the chopper pushing scans the detector's pixel array, thus makes the pixels being exposed continuously. This paper simulates the shape of this kind of chopper, analyses the exposure time of the detector's every pixel, and also analyses the whole detector pixels' exposure sequence. From the analysis we can get the results: the parameter of Archimedes spiral cord, the detector's thermal time constant, the detector's geometrical dimension, the relative position of the detector to the chopper's spiral cord are the system's important parameters, they will affect the chopper's exposure efficiency and uniformity. We should design the chopper's relevant parameter according to the practical request to achieve the chopper's appropriate structure.

Linking India Global Health Professions Student Survey data to the World Health Organization Framework Convention on Tobacco Control.

PubMed

Sinha, D N; Singh, G; Gupta, P C; Pednekar, M; Warrn, C W; Asma, S; Lee, J

2010-07-01

The 2003 India Tobacco Control Act (ITCA) includes provisions designed to reduce tobacco consumption and protect citizens from exposure to secondhand smoke. India ratified the World Health Organization Framework Convention on Tobacco Control (WHO FCTC) on February 27, 2005. The WHO FCTC is the world's first public health treaty that aims to promote and protect public health and reduce the devastating health and economic impact of tobacco. The Global Health Professions Student Survey (GHPSS) was developed to track tobacco use among third-year dental, medical, nursing, and pharmacy students across countries. Data from the dental (2005), medical (2006), nursing(2007), and pharmacy (2008) GHPSS conducted in India showed high prevalence of tobacco use and a general lack of training by health professionals in patient cessation counseling techniques. The Ministry of Health and Family Welfare could use this information to monitor and evaluate the existing tobacco control program effort in India as well as to develop and implement new tobacco control program initiatives.

Spatially-controlled illumination with rescan confocal microscopy enhances image quality, resolution and reduces photodamage

NASA Astrophysics Data System (ADS)

Krishnaswami, Venkataraman; De Luca, Giulia M. R.; Breedijk, Ronald M. P.; Van Noorden, Cornelis J. F.; Manders, Erik M. M.; Hoebe, Ron A.

2017-02-01

Fluorescence microscopy is an important tool in biomedical imaging. An inherent trade-off lies between image quality and photodamage. Recently, we have introduced rescan confocal microscopy (RCM) that improves the lateral resolution of a confocal microscope down to 170 nm. Previously, we have demonstrated that with controlled-light exposure microscopy, spatial control of illumination reduces photodamage without compromising image quality. Here, we show that the combination of these two techniques leads to high resolution imaging with reduced photodamage without compromising image quality. Implementation of spatially-controlled illumination was carried out in RCM using a line scanning-based approach. Illumination is spatially-controlled for every line during imaging with the help of a prediction algorithm that estimates the spatial profile of the fluorescent specimen. The estimation is based on the information available from previously acquired line images. As a proof-of-principle, we show images of N1E-115 neuroblastoma cells, obtained by this new setup with reduced illumination dose, improved resolution and without compromising image quality.

Developing COSHH Essentials: dermal exposure, personal protective equipment and first aid.

PubMed

Garrod, A N I; Rajan-Sithamparanadarajah, R

2003-10-01

The 'control banding' approach in COSHH Essentials combines the potential for harm with the potential for exposure by inhalation to band measures to control exposure at source, as generic strategies. These are simply adapted to specific tasks and circumstances to produce specific control advice. Where it is not possible or practical to use this control advice, the control bands can suggest adequate respiratory protective equipment using 'protection factors'. Proposals in the paper enable the user to identify the right level of respiratory protective equipment (RPE), and to begin selecting suitable RPE. Selection is made through a formatted questionnaire, enabling the user to give the right facts to the supplier. COSHH Essentials applies mainly to exposure by inhalation. However, skin exposure is very common and uptake via the skin can be an important contributor to body dose. This paper examines the factors concerning skin exposure, and the options for banding the potential for harm to the skin or via the skin. Proposals have then been made for dermal exposure control. Planning for emergencies is an important facet of risk control. Proposals are outlined to band chemical hazards for emergency planning according to a minimum of information, i.e. the danger symbol on a product label.

Dispersant use as a response to oil spills: toxicological effects on fish cardiac performance.

PubMed

Milinkovitch, Thomas; Thomas-Guyon, Hélène; Lefrançois, Christel; Imbert, Nathalie

2013-04-01

Dispersant use is a controversial technique used to respond to oil spills in nearshore areas. In order to assess the toxicity of this technique, this study evaluated the cardiac toxicological effects on juvenile golden grey mullets Liza aurata exposed for 48 h to either dispersant alone, chemically dispersed oil, mechanically dispersed oil, the water-soluble fraction of oil or a control condition. Following exposure, the positive inotropic effects of adrenaline were assessed in order to evaluate a potential impairment on the cardiac performance. The results revealed an impairment of the positive inotropic effects of adrenaline for all the contaminants (single dispersant, dispersed and undispersed oil, water-soluble fraction of oil). This suggests that: (1) cardiac performance is a valuable parameter to study the physiopathological effects of dispersed oil; (2) dispersant application is likely to impair cardiac performance.

Caged mudsnail Potamopyrgus antipodarum (Gray) as an integrated field biomonitoring tool: exposure assessment and reprotoxic effects of water column contamination.

PubMed

Gust, M; Gagné, F; Berlioz-Barbier, A; Besse, J P; Buronfosse, T; Tournier, M; Tutundjian, R; Garric, J; Cren-Olivé, C

2014-05-01

This study highlights the usefulness of gastropods for water quality monitoring. Gastropods were caged upstream and downstream of an effluent discharge. Exposure was assessed by measurement of organic contaminants in water. Contamination of the Potamopyrgus antipodarum mudsnail was also measured using innovative techniques at the end of the 42 days of exposure. Biological effects were measured at the individual level (growth, reproduction) and subindividual level (energy reserves, vitellin-like proteins, steroid levels, expression of genes involved in estrogen signaling pathways), thus providing a better understanding of reprotoxic effects. The effluent was mainly contaminated by pharmaceutical compounds, as was the mudsnail. The highest concentrations were measured for oxazepam and were higher than 2 mg/kg downstream of the effluent discharge. Alkylphenols, bisphenol A, and vertebrate-like sex-steroid hormones were also bioaccumulated by the mudsnail downstream of the effluent. The combined use of water and snail contamination provided a complete exposure assessment. Exposure was further linked to biological effects. The mudsnail was shown to be a better adapted species for in situ exposures than Valvata piscinalis. Reproduction was sharply decreased after 6 weeks of exposure in the mudsnail. Feeding issues were excluded, confirming the toxic origin. These effects were related to estrogen signaling pathways using genomic analysis. Genes coding for proteins involved in nongenomic signaling pathways were inhibited, and those of genomic pathway repressors were induced. These results suggest that the chemical contamination due to the effluent discharge altered steroid control of reproduction and blocked the transition between oocyte and unshelled embryo, resulting in a drastic decrease of embryo production, while survival was not affected. Copyright © 2014 Elsevier Ltd. All rights reserved.

Does extinction of responses to cigarette cues occur during smoking cessation?

PubMed

O'Connell, Kathleen A; Shiffman, Saul; Decarlo, Lawrence T

2011-02-01

This study investigated whether Pavlovian extinction occurs during smoking cessation by determining whether experience abstaining from smoking in the presence of cigarette cues leads to decreased probability of lapsing and whether this effect is mediated by craving. Secondary analyses were carried out with data sets from two studies with correlational/observational designs. Data were collected in smokers' natural environments using ecological momentary assessment techniques. Sixty-one and 207 smokers who were attempting cessation participated. Multi-level path models were used to examine effects of prior experience abstaining in the presence of available cigarettes and while others were smoking on subsequent craving intensity and the probability of lapsing. Control variables included current cigarette availability, current exposure to others smoking, number of prior lapses and time in the study. Both currently available cigarettes [odds ratios (OR) = 36.60, 11.59] and the current presence of other smoking (OR = 5.00, 1.52) were powerful predictors of smoking lapse. Repeated exposure to available cigarettes without smoking was associated with a significantly lower probability of lapse in subsequent episodes (OR = 0.44, 0.52). However, exposure to others smoking was not a reliable predictor, being significant only in the smaller study (OR = 0.30). Craving functioned as a mediator between extinction of available cigarettes and lapsing only in the smaller study and was not a mediator for extinction of others smoking in either study. This study showed that exposure to available cigarettes is a large risk factor for lapsing, but that this risk can also be reduced over time by repeated exposures without smoking. Smoking cessation interventions should attempt to reduce cigarette exposure (by training cigarette avoidance) but recognize the potential advantage of unreinforced exposure to available cigarettes. © 2010 The Authors, Addiction © 2010 Society for the Study of Addiction.

Effects of low-level exposure to sarin and cyclosarin during the 1991 Gulf War on brain function and brain structure in US veterans

PubMed Central

Chao, Linda L.; Rothlind, Johannes C.; Cardenas, Valerie A.; Meyerhoff, Dieter J.; Weiner, Michael W.

2010-01-01

Background Potentially more than 100,000 US troops may have been exposed to the organophosphate chemical warfare agents sarin (GB) and cyclosarin (GF) when a munitions dump at Khamisiyah, Iraq was destroyed during the Gulf War (GW) in 1991. Although little is known about the long-term neurobehavioral or neurophysiological effects of low-dose exposure to GB/GF in humans, recent studies of GW veterans from the Devens Cohort suggest decrements in certain cognitive domains and atrophy in brain white matter occur individuals with higher estimated levels of presumed GB/GF exposure. The goal of the current study is to determine the generalizability of these findings in another cohort of GW veterans with suspected GB/GF exposure. Methods Neurobehavioral and imaging data collected in a study on Gulf War Illness between 2002–2007 were used in this study. We focused on the data of 40 GW-deployed veterans categorized as having been exposed to GB/GF at Khamisiyah, Iraq and 40 matched controls. Magnetic resonance images (MRI) of the brain were analyzed using automated and semi-automated image processing techniques that produced volumetric measurements of gray matter (GM), white matter (WM), cerebrospinal fluid (CSF) and hippocampus. Results GW veterans with suspected GB/GF exposure had reduced total GM and hippocampal volumes compared to their unexposed peers (p≤0.01). Although there were no group differences in measures of cognitive function or total WM volume, there were significant, positive correlations between total WM volume and measures of executive function and visuospatial abilities in veterans with suspected GB/GF exposure. Conclusions These findings suggest that low-level exposure to GB/GF can have deleterious effects on brain structure and brain function more than decade later. PMID:20580739

Reduction of I(Ca,L) and I(to1) density in hypertrophied right ventricular cells by simulated high altitude in adult rats.

PubMed

Chouabe, C; Espinosa, L; Megas, P; Chakir, A; Rougier, O; Freminet, A; Bonvallet, R

1997-01-01

The present paper describes the effect of a simulated hypobaric condition (at the altitude of 4500 m) on morphological characteristics and on some ionic currents in ventricular cells of adult rats. According to current data, chronic high-altitude exposure led to mild right ventricular hypertrophy. Increase in right ventricular weight appeared to be due wholly or partly to an enlargement of myocytes. The whole-cell patch-clamp technique was used and this confirmed, by cell capacitance measurement, that chronic high-altitude exposure induced an increase in the size of the right ventricular cells. Hypertrophied cells showed prolongation of action potential (AP). Four ionic currents, playing a role along with many others in the precise balance of inward and outward currents that control the duration of cardiac AP, were investigated. We report a significant decrease in the transient outward (I(to1)) and in the L-type calcium current (I(Ca,L)) densities while there was no significant difference in the delayed rectifier current (I(K)) or in the inward rectifier current (I(K1)) densities in hypertrophied right ventricular cells compared to control cells. At a given potential the decrease in I(to 1) density was relatively more important than the decrease in I(Ca,L) density. In both cell types, all the currents displayed the same voltage dependence. The inactivation kinetics of I(to 1) and I(Ca,L) or the steady-state activation and inactivation relationships were not significantly modified by chronic high-altitude exposure. We conclude that chronic high-altitude exposure induced true right ventricular myocyte hypertrophy and that the decrease in I(to 1) density might account for the lengthened action potential, or have a partial effect.

Good research practices for comparative effectiveness research: approaches to mitigate bias and confounding in the design of nonrandomized studies of treatment effects using secondary data sources: the International Society for Pharmacoeconomics and Outcomes Research Good Research Practices for Retrospective Database Analysis Task Force Report--Part II.

PubMed

Cox, Emily; Martin, Bradley C; Van Staa, Tjeerd; Garbe, Edeltraut; Siebert, Uwe; Johnson, Michael L

2009-01-01

The goal of comparative effectiveness analysis is to examine the relationship between two variables, treatment, or exposure and effectiveness or outcome. Unlike data obtained through randomized controlled trials, researchers face greater challenges with causal inference with observational studies. Recognizing these challenges, a task force was formed to develop a guidance document on methodological approaches to addresses these biases. The task force was commissioned and a Chair was selected by the International Society for Pharmacoeconomics and Outcomes Research Board of Directors in October 2007. This report, the second of three reported in this issue of the Journal, discusses the inherent biases when using secondary data sources for comparative effectiveness analysis and provides methodological recommendations to help mitigate these biases. The task force report provides recommendations and tools for researchers to mitigate threats to validity from bias and confounding in measurement of exposure and outcome. Recommendations on design of study included: the need for data analysis plan with causal diagrams; detailed attention to classification bias in definition of exposure and clinical outcome; careful and appropriate use of restriction; extreme care to identify and control for confounding factors, including time-dependent confounding. Design of nonrandomized studies of comparative effectiveness face several daunting issues, including measurement of exposure and outcome challenged by misclassification and confounding. Use of causal diagrams and restriction are two techniques that can improve the theoretical basis for analyzing treatment effects in study populations of more homogeneity, with reduced loss of generalizability.

Evaluation of COSHH essentials: methylene chloride, isopropanol, and acetone exposures in a small printing plant.

PubMed

Lee, Eun Gyung; Harper, Martin; Bowen, Russell B; Slaven, James

2009-07-01

The current study evaluated the Control of Substances Hazardous to Health (COSHH) Essentials model for short-term task-based exposures and full-shift exposures using measured concentrations of three volatile organic chemicals at a small printing plant. A total of 188 exposure measurements of isopropanol and 187 measurements of acetone were collected and each measurement took approximately 60 min. Historically, collected time-weighted average concentrations (seven results) were evaluated for methylene chloride. The COSHH Essentials model recommended general ventilation control for both isopropanol and acetone. There was good agreement between the task-based exposure measurements and the COSHH Essentials predicted exposure range (PER) for cleaning and print preparation with isopropanol and for cleaning with acetone. For the other tasks and for full-shift exposures, agreement between the exposure measurements and the PER was either moderate or poor. However, for both isopropanol and acetone, our findings suggested that the COSHH Essentials model worked reasonably well because the probabilities of short-term exposure measurements exceeding short-term occupational exposure limits (OELs) or full-shift exposures exceeding the corresponding full-shift OELs were <0.05 under the recommended control strategy. For methylene chloride, the COSHH Essentials recommended containment control but a follow-up study was not able to be performed because it had already been replaced with a less hazardous substance (acetone). This was considered a more acceptable alternative to increasing the level of control.

A case-control study of chronic neuropsychiatric disease and organic solvent exposure in automobile assembly plant workers.

PubMed Central

Nelson, N A; Robins, T G; White, R F; Garrison, R P

1994-01-01

A case-control study of chronic neurological and psychiatric disease and occupational exposure to solvents was carried out in eight automobile assembly plants. Cases included 299 subjects who were granted medical disability retirement in 1980-8. Two control groups were selected, the first from those granted retirement in the same period because of medical disability from causes unrelated to solvent exposure. The second included hourly employees from the plant population. In these facilities, solvent exposures tended to be short term and low level, although common: the average duration of exposure was 2.3 years; about 41% experienced at least one day of exposure. Of those exposed, 46% had less than one year of exposure. Results for all psychiatric disease combined (273 cases) suggested that cases had lower exposures than either control group, regardless of how exposure was expressed. Results could not be explained by conventional confounding exposures or characteristics or by usual manifestations of the healthy worker effect. By contrast, chronic neurological disease, and multiple sclerosis in particular, seemed to be associated with exposure, although few cases were identified and observed increases in risk were not statistically significant. PMID:8199679

75 FR 68200 - Medical Devices; Radiology Devices; Reclassification of Full-Field Digital Mammography System

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-05

... exposure control, image processing and reconstruction programs, patient and equipment supports, component..., acquisition workstation, automatic exposure control, image processing and reconstruction programs, patient and... may include was revised by adding automatic exposure control, image processing and reconstruction...

Upscaling heterogeneity in aquifer reactivity via exposure-time concept: forward model.

PubMed

Seeboonruang, Uma; Ginn, Timothy R

2006-03-20

Reactive properties of aquifer solid phase materials play an important role in solute fate and transport in the natural subsurface on time scales ranging from years in contaminant remediation to millennia in dynamics of aqueous geochemistry. Quantitative tools for dealing with the impact of natural heterogeneity in solid phase reactivity on solute fate and transport are limited. Here we describe the use of a structural variable to keep track of solute flux exposure to reactive surfaces. With this approach, we develop a non-reactive tracer model that is useful for determining the signature of multi-scale reactive solid heterogeneity in terms of solute flux distributions at the field scale, given realizations of three-dimensional reactive site density fields. First, a governing Eulerian equation for the non-reactive tracer model is determined by an upscaling technique in which it is found that the exposure time of solution to reactive surface areas evolves via both a macroscopic velocity and a macroscopic dispersion in the artificial dimension of exposure time. Second, we focus on the Lagrangian approach in the context of a streamtube ensemble and demonstrate the use of the distribution of solute flux over the exposure time dimension in modeling two-dimensional transport of a solute undergoing simplified linear reversible reactions, in hypothetical conditions following prior laboratory experiments. The distribution of solute flux over exposure time in a given case is a signature of the impact of heterogeneous aquifer reactivity coupled with a particular physical heterogeneity, boundary conditions, and hydraulic gradient. Rigorous application of this approach in a simulation sense is limited here to linear kinetically controlled reactions.

Inferring ultraviolet anatomical exposure patterns while distinguishing the relative contribution of radiation components

NASA Astrophysics Data System (ADS)

Vuilleumier, Laurent; Milon, Antoine; Bulliard, Jean-Luc; Moccozet, Laurent; Vernez, David

2013-05-01

Exposure to solar ultraviolet (UV) radiation is the main causative factor for skin cancer. UV exposure depends on environmental and individual factors, but individual exposure data remain scarce. While ground UV irradiance is monitored via different techniques, it is difficult to translate such observations into human UV exposure or dose because of confounding factors. A multi-disciplinary collaboration developed a model predicting the dose and distribution of UV exposure on the basis of ground irradiation and morphological data. Standard 3D computer graphics techniques were adapted to develop a simulation tool that estimates solar exposure of a virtual manikin depicted as a triangle mesh surface. The amount of solar energy received by various body locations is computed for direct, diffuse and reflected radiation separately. Dosimetric measurements obtained in field conditions were used to assess the model performance. The model predicted exposure to solar UV adequately with a symmetric mean absolute percentage error of 13% and half of the predictions within 17% range of the measurements. Using this tool, solar UV exposure patterns were investigated with respect to the relative contribution of the direct, diffuse and reflected radiation. Exposure doses for various body parts and exposure scenarios of a standing individual were assessed using erythemally-weighted UV ground irradiance data measured in 2009 at Payerne, Switzerland as input. For most anatomical sites, mean daily doses were high (typically 6.2-14.6 Standard Erythemal Dose, SED) and exceeded recommended exposure values. Direct exposure was important during specific periods (e.g. midday during summer), but contributed moderately to the annual dose, ranging from 15 to 24% for vertical and horizontal body parts, respectively. Diffuse irradiation explained about 80% of the cumulative annual exposure dose.

Sun exposure and protection behaviors among long-term melanoma survivors and non-cancer controls

PubMed Central

Vogel, Rachel Isaksson; Strayer, Lori G.; Engelman, Leah; Nelson, Heather H.; Blaes, Anne H.; Anderson, Kristin E.; Lazovich, DeAnn

2016-01-01

Introduction Melanoma is considered a generally preventable cancer, with excessive ultraviolet radiation (UVR) exposure being a strong causal factor. UVR exposure following a melanoma diagnosis can be modified to reduce risk of second primary melanomas. The goal of this study was to compare measures of UVR exposure and protection behaviors between long-term melanoma survivors and controls. Methods Participants from a previously conducted case-control study were recruited for a cross-sectional survey. Melanoma cases were 25–59 years old at diagnosis; controls were age and sex matched. Participants were asked about UVR exposure and protection measures used in the past year and comparisons between melanoma survivors and controls were conducted using logistic regression models, adjusting for potential confounders. Results A total of 726 (67.7%) long-term melanoma survivors and 657 (60.9%) controls completed the follow-up survey. Melanoma survivors were significantly less likely to report high sun exposure on a typical weekday (OR=0.72 [0.55–0.94]), sunburns (OR=0.40 [0.30–0.53]), or indoor tanning (OR=0.20 [0.09–0.44]) than controls; however high sun exposure on a typical weekend day was similar. Report of optimal sun protection behaviors were higher in melanoma survivors compared to controls. However, a few melanoma survivors reported indoor tanning, 10% reported intentionally seeking sun to tan, and 20% reported sunburns. Conclusion Although long term melanoma survivors reported healthier UVR exposure and protection behaviors compared to controls, a sizeable proportion still reported elevated sun exposure, sunburns, and suboptimal UVR protection behaviors. Impact Opportunities remain for improving sun protection to reduce future melanoma risk among melanoma survivors. PMID:28254810

RIR-MAPLE deposition of conjugated polymers and hybrid nanocomposites for application to optoelectronic devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stiff-Roberts, Adrienne D.; Pate, Ryan; McCormick, Ryan

2012-07-30

Resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) is a variation of pulsed laser deposition that is useful for organic-based thin films because it reduces material degradation by selective absorption of infrared radiation in the host matrix. A unique emulsion-based RIR-MAPLE approach has been developed that reduces substrate exposure to solvents and provides controlled and repeatable organic thin film deposition. In order to establish emulsion-based RIR-MAPLE as a preferred deposition technique for conjugated polymer or hybrid nanocomposite optoelectronic devices, studies have been conducted to demonstrate the value added by the approach in comparison to traditional solution-based deposition techniques, and this workmore » will be reviewed. The control of hybrid nanocomposite thin film deposition, and the photoconductivity in such materials deposited using emulsion-based RIR-MAPLE, will also be reviewed. The overall result of these studies is the demonstration of emulsion-based RIR-MAPLE as a viable option for the fabrication of conjugated polymer and hybrid nanocomposite optoelectronic devices that could yield improved device performance.« less

Automatic Exposure Control Device for Digital Mammography

DTIC Science & Technology

2001-08-01

developing innovative approaches for controlling DM exposures. These approaches entail using the digital detector and an artificial neural network to...of interest that determine the exposure parameters for the fully exposed image; and (2) to use an artificial neural network to select exposure

Automatic Exposure Control Device for Digital Mammography

DTIC Science & Technology

2004-08-01

developing innovative approaches for controlling DM exposures. These approaches entail using the digital detector and an artificial neural network to...of interest that determine the exposure parameters for the fully exposed image; and (2) to use an artificial neural network to select exposure

Grey-scale ultrasonography for monitoring industrial exposure to hepatotoxic agents.

PubMed

Taylor, K J; Williams, D M; Smith, P M; Duck, B W

1975-05-31

Industrial exposure to several potentially hepatotoxic agents, such as vinyl-chloride monomer may occur, and there is a need for non-vasive, diagnostic techniques to detect and monitor progressive pathological processes in liver or spleen. Grey-scale ultrasonography permits display of detailed anatomy and pathology in the liver, portal veins, and spleen. The combination of fine resolution, non-invasiveness, absence of ionising radiation hazard, and portable equipment makes the technique ideal for screening populations at risk.

The impact of natural sunlight exposure on the UVB-sun protection factor (UVB-SPF) and UVA protection factor (UVA-PF) of a UVA/UVB SPF 50 sunscreen.

PubMed

Stephens, Thomas J; Herndon, James H; Colón, Luz E; Gottschalk, Ronald W

2011-02-01

To compare the functional stability of Cetaphil UVA/UVB Defense SPF 50 as measured by its ultraviolet B sun protection factor (UVB-SPF) and ultraviolet A protection factor (UVA-PF) values following exposure to natural sunlight versus the UVB-SPF and UVA-PF values of unexposed product. These two randomized, controlled, evaluator-blinded, single-center trials were conducted according to the methods outlined in the 2007 Proposed Amendment to the Final Monograph, “Sunscreen Drug Products for Over-the-Counter Human Use.” Sunscreen samples were applied to glass plates and exposed to ultraviolet radiation in the form of natural sunlight in four minimal erythemal doses (MED) ranging from 2–6 MED (42–36 mJ/cm2). Three test sites were identified on the back of each study subject. Exposed sunscreen (one of four doses), unexposed sunscreen, and a UVB-SPF 15 control sunscreen were applied to the three test sites in a randomized fashion, followed by UV irradiation of incremental doses. Erythema and pigment darkening responses were assessed immediately following UV exposure and again 16–24 hours (erythema) or three to 24 hours (pigment darkening) after exposure. UVB-SPF and UVA-PF values were calculated for the exposed and unexposed samples. The calculated UVB-SPF and UVA-PF values for all test samples (exposed and unexposed) were >50 and >9, respectively, which were greater than the stated UVB-SPF and UVA-PF values on the product label. No differences were observed between the exposed and unexposed samples in UVB-SPF or UVA-PF. The UVA and UVB protection using standard evaluation techniques of Cetaphil UVA/UVB Defense SPF 50 remains stable despite exposure of the sunscreen to natural sunlight containing UVB ranging from 2–16 MED (41–336 mJ/cm2) and coexistent UVA.

Relationship between exposure to pesticides and occurrence of acute leukemia in Iran.

PubMed

Maryam, Zakerinia; Sajad, Amirghofran; Maral, Namdari; Zahra, Lesan; Sima, Pooralimohamad; Zeinab, Attabac; Zahra, Mehravar; Fariba, Ebrahimi; Sezaneh, Haghpanah; Davood, Mehrabani

2015-01-01

One of the causes of acute leukemia can be exposure to certain chemicals such as pesticides. This study determined the relationship between exposure to pesticides and the occurrence of acute leukemia in Fars province, south of Iran. Between April 2011 and April 2013 in a case-control study conducted in Nemazee Hospital in Shiraz, Southern Iran; 314 subjects diagnosed with acute leukemia (94 pediatric cases and 220 adults) were enrolled to determine any correlation between exposure to pesticides and the occurrence. Controls (n=314) were matched by sex and age. There was a history of exposure to pesticides among 85% of pediatric cases and 69% of their controls and 83% of adult cases and 75% of their controls while 87.5% of pediatric cases and 90% of adult cases reported exposure to intermediate and high doses of pesticides and among the controls, the exposure to low doses of pesticides was 70.5% and 65%, respectively. Exposure to indoor pesticides was seen among most of cases and controls. Being a farmer was at a significantly more increased risk of developing acute leukemia in comparison to other jobs, especially for their children. Exposure to pesticides was shown to be one of the most important causes of acute leukemia. It seems that there is a need to educate the people on public health importance of exposure to pesticides especially during school time to reduce the risk of malignancies during childhood.

Development and evaluation of a technique for in vivo monitoring of 60Co in human liver

NASA Astrophysics Data System (ADS)

Gomes, GH; Silva, MC; Mello, JQ; Dantas, ALA; Dantas, BM

2018-03-01

60Co is an artificial radioactive metal produced by activation of iron with neutrons. It decays by beta particles and gamma radiation and represents a risk of internal exposure of workers involved in the maintenance of nuclear power reactors. Intakes can be quantified through in vivo monitoring. This work describes the development of a technique for the quantification of 60Co in human liver. The sensitivity of the method is evaluated based on the minimum detectable effective doses. The results allow to state that the technique is suitable either for monitoring of occupational exposures or evaluation of accidental intakes.

Can control banding be useful for the safe handling of nanomaterials? A systematic review

NASA Astrophysics Data System (ADS)

Eastlake, Adrienne; Zumwalde, Ralph; Geraci, Charles

2016-06-01

Control banding (CB) is a risk management strategy that has been used to identify and recommend exposure control measures to potentially hazardous substances for which toxicological information is limited. The application of CB and level of expertise required for implementation and management can differ depending on knowledge of the hazard potential, the likelihood of exposure, and the ability to verify the effectiveness of exposure control measures. A number of different strategies have been proposed for using CB in workplaces where exposure to engineered nanomaterials (ENMs) can occur. However, it is unclear if the use of CB can effectively reduce worker exposure to nanomaterials. A systematic review of studies was conducted to answer the question "can control banding be useful to ensure adequate controls for the safe handling of nanomaterials." A variety of databases were searched to identify relevant studies pertaining to CB. Database search terms included `control,' `hazard,' `exposure,' and `risk' banding as well as the use of these terms in the context of nanotechnology or nanomaterials. Other potentially relevant studies were identified during the review of articles obtained in the systematic review process. Identification of studies and the extraction of data were independently conducted by the reviewers. Quality of the studies was assessed using the methodological index for nonrandomized studies. The quality of the evidence was evaluated using grading of recommendations assessment, development and evaluation (GRADE). A total of 235 records were identified in the database search in which 70 records were determined to be eligible for full-text review. Only two studies were identified that met the inclusion criteria. These studies evaluated the application of the CB Nanotool in workplaces where ENMs were being handled. A total of 32 different nanomaterial handling activities were evaluated in these studies by comparing the recommended exposure controls using CB to existing exposure controls previously recommended by an industrial hygienist. It was determined that the selection of exposure controls using CB were consistent with those recommended by an industrial hygienist for 19 out of 32 (59.4 %) job activities. A higher level of exposure control was recommended for nine out of 32 (28.1 %) job activities using CB, while four out of 32 (12.5 %) job activities had in-place exposure controls that were more stringent than those recommended using CB. After evaluation using GRADE, evidence indicated that the use of CB Nanotool can recommend exposure controls for many ENM job activities that would be consistent with those recommended by an experienced industrial hygienist. The use of CB for reducing exposures to ENMs has the potential to be an effective risk management strategy when information is limited on the health risk to the nanomaterial and/or there is an absence of an occupational exposure limit. However, there remains a lack of evidence to conclude that the use of CB can provide adequate exposure control in all work environments. Additional validation work is needed to provide more data to support the use of CB for the safe handling of ENMs.

Chronic ethanol administration inhibits calmodulin-dependent Ca++ uptake in synaptosomal membranes.

PubMed

Ross, D H

1986-06-01

Chronic ethanol administration inhibits ATP-dependent Ca++ uptake in a preparation of synaptic membranes prepared from mice following 1, 4 and 7 days of ethanol exposure in a liquid diet. Addition of calmodulin (2.5 micrograms) to membranes from mice receiving the control diet produced a slight stimulation of ATP dependent Ca++ uptake. Membranes from ETOH treated mice exhibited reduced capacity to take up Ca++ in ATP-dependent fashion. When calmodulin was added to membranes isolated from mice receiving ETOH on Days 1, 4 and 7 ATP-dependent Ca++ uptake was significantly stimulated (p less than 0.01) compared to (1) ETOH treated membranes in absence of calmodulin, and (2) control membranes. Behavioral tolerance as estimated by bar holding technique was found to be 25, 65 and 91 percent complete for Days 1, 4 and 7 respectively. These studies demonstrate that continued exposure of mice to ethanol via consumption of an ethanol containing liquid diet inhibits one of the mechanisms involving the cytosolic buffering of intracellular Ca++ in nerve terminals. This biochemical effect seen in parallel with the development of tolerance to ethanol impairment of bar holding suggests that increased cytosolic Ca++ may aid in central nervous system adaptation to ethanol.

Daily diaries of respiratory symptoms and air pollution: Methodological issues and results

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwartz, J.; Wypij, D.; Dockery D.

1991-01-01

Daily diaries of respiratory symptoms are a powerful technique for detecting acute effects of air pollution exposure. While conceptually simple, these diary studies can be difficult to analyze. The daily symptom rates are highly correlated, even after adjustment for covariates, and this lack of independence must be considered in the analysis. Possible approaches include the use of incidence instead of prevalence rates and autoregressive models. Heterogeneity among subjects also induces dependencies in the data. These can be addressed by stratification and by two-stage models such as those developed by Korn and Whittemore. These approaches have been applied to two datamore » sets: a cohort of school children participating in the Harvard Six Cities Study and a cohort of student nurses in Los Angeles. Both data sets provide evidence of autocorrelation and heterogeneity. Controlling for autocorrelation corrects the precision estimates, and because diary data are usually positively autocorrelated, this leads to larger variance estimates. Controlling for heterogeneity among subjects appears to increase the effect sizes for air pollution exposure. Preliminary results indicate associations between sulfur dioxide and cough incidence in children and between nitrogen dioxide and phlegm incidence in student nurses.« less

Occupational hazards among the abattoir workers associated with noncompliance to the meat processing and waste disposal laws in Malaysia

PubMed Central

Abdullahi, Auwalu; Hassan, Azmi; Kadarman, Norizhar; Junaidu, Yakubu Muhammad; Adeyemo, Olanike Kudrat; Lua, Pei Lin

2016-01-01

Purpose This study aims to investigate the occupational hazards among the abattoir workers associated with noncompliance to the meat processing and waste disposal laws in Terengganu State, Malaysia. Occupational hazards are the major source of morbidity and mortality among the animal workers due to exposure to many hazardous situations in their daily practices. Occupational infections mostly contracted by abattoir workers could be caused by iatrogenic or transmissible agents, including viruses, bacteria, fungi, and parasites and the toxins produced by these organisms. Materials and methods The methodology was based on a cross-sectional survey using cluster sampling technique in the four districts of Terengganu State, Malaysia. One hundred and twenty-one abattoir workers from five abattoirs were assessed using a validated structured questionnaire and an observation checklist. Results The mean and standard deviation of occupational hazards scores of the workers were 2.32 (2.721). Physical, chemical, biological, psychosocial, musculoskeletal, and ergonomics hazards were the major findings of this study. However, the highest prevalence of occupational hazards identified among the workers was injury by sharp equipment such as a knife (20.0%), noise exposure (17.0%), and due to offensive odor within the abattoir premises (12.0%). Conclusion The major occupational hazards encountered by the workers in the study area were physical, chemical, biological, psychosocial, musculoskeletal, and ergonomics hazards. To ensure proper control of occupational health hazards among the abattoir workers, standard design and good environmental hygiene must be taken into consideration all the time. Exposure control plan, which includes risk identification, risk characterization, assessment of workers at risk, risk control, workers’ education/training, and implementation of safe work procedures, should be implemented by the government and all the existing laws governing the abattoir operation in the country should be enforced. PMID:27471416

Intussusception reduction: Effect of air vs. liquid enema on radiation dose.

PubMed

Kaplan, Summer L; Magill, Dennise; Felice, Marc A; Edgar, J Christopher; Anupindi, Sudha A; Zhu, Xiaowei

2017-10-01

Both air and radiopaque liquid contrast are used to reduce ileocolic intussusception under fluoroscopy. Some suggest air lowers radiation dose due to shorter procedure times. However, air enema likely lowers radiation dose regardless of fluoroscopy time due to less density over the automatic exposure control cells. We test the hypothesis that air enema reduction of ileocolic intussusception results in lower radiation dose than liquid contrast enema independent of fluoroscopy time. We describe a role for automatic exposure control in this dose difference. We retrospectively evaluated air and liquid intussusception reductions performed on a single digital fluoroscopic unit during a 26-month period. We compared patient age, weight, gender, exam time of day and year, performing radiologist(s), radiographic image acquisitions, grid and magnification use, fluoroscopy time and dose area product. We compared categorical and continuous variables statistically using chi-square and Mann-Whitney U tests, respectively. The mean dose area product was 2.7-fold lower for air enema, 1.3 ± 0.9 dGy·cm 2 , than for liquid, 3.5 ± 2.5 dGy·cm 2 (P<0.005). The mean fluoroscopy time was similar between techniques. The mean dose area product/min was 2.3-fold lower for air, 0.6 ± 0.2 dGy·cm 2 /min, than for liquid, 1.4 ± 0.5 dGy·cm 2 /min (P<0.001). No group differences were identified in other measured dose parameters. Fluoroscopic intussusception reduction using air enema uses less than half the radiation dose of liquid contrast enema. Dose savings are independent of fluoroscopy time and are likely due to automatic exposure control interaction.

Recolonization of laser-ablated bacterial biofilm.

PubMed

Nandakumar, Kanavillil; Obika, Hideki; Utsumi, Akihiro; Toshihiko, Ooie; Yano, Tetsuo

2004-01-20

The recolonization of laser-ablated bacterial monoculture biofilm was studied in the laboratory by using a flow-cytometer system. The marine biofilm-forming bacterium Pseudoalteromonas carrageenovora was used to develop biofilms on titanium coupons. Upon exposure to a low-power pulsed irradiation from an Nd:YAG laser, the coupons with biofilm were significantly reduced both in terms of total viable count (TVC) and area cover. The energy density used for a pulse of 5 ns was 0.1 J/cm(2) and the durations of irradiation exposure were 5 and 10 min. When placed in a flow of dilute ZoBell marine broth medium (10%) the laser-destructed bacterial film in a flow-cytometer showed significant recovery over a period of time. The flow of medium was regulated at 3.2 ml/min. The increase in area cover and TVC, however, was significantly less than that observed for nonirradiated control (t-test, P< 0.05). The coupons were observed for biofilm area cover and TVC at different intervals (3, 6, and 9 h) after irradiation. While the biofilm in the control coupon at the end of 9 h of exposure showed 95.6 +/- 4.1% cover, the 5- and 10-min irradiated samples after 9 h showed 60.3 +/- 6.5 and 37.4 +/- 12.1% area cover, respectively. The reduced rate of recolonization compared to control was thought be due to the lethal and sublethal impacts of laser irradiation on bacteria. This observation thus provided data on the online recolonization speed of biofilm, which is important when considering pulsed laser irradiation as an ablating technique of biofilm formation and removal in natural systems. Copyright 2003 Wiley Periodicals, Inc.

Cognitive Control Dysfunction in Workers Exposed to Manganese-Containing Welding Fume

PubMed Central

Al-Lozi, A; Nielsen, SS; Hershey, T; Birke, A; Checkoway, H; Criswell, SR; Racette, BA

2017-01-01

Background Chronic exposure to manganese (Mn) is a health concern in occupations such as welding because of well-established motor effects due to basal ganglia dysfunction. We hypothesized that cognitive control (the ability to monitor, manipulate, and regulate ongoing cognitive demands) would also be affected by chronic Mn exposure. Methods We examined the relationship between Mn exposure and cognitive control performance in 95 workers with varying intensity and duration (median 15.5 years) of exposure to welding fume. We performed linear regression to assess the association between exposure to Mn-containing welding fume and cognitive control tasks. Results Overall performance was inversely related to intensity of welding exposure (p=0.009) and was driven by the Two-Back and Letter Number Sequencing tests that assess working memory (both p=0.02). Conclusions Occupational exposure to Mn-containing welding fume may be associated with poorer working memory performance, and workers may benefit from practices that reduce exposure intensity. PMID:27862095

A case-control study of airways obstruction among construction workers: Airways Obstruction Among Construction Workers

DOE PAGES

Dement, John; Welch, Laura; Ringen, Knut; ...

2015-06-29

Background: While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case-control study estimated the risk of COPD attributable to occupational exposures among construction workers. Methods: The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. Results: Approximately 18% (95%CI=2–24%) of COPD risk can be attributed to construction-related exposures, which are additive to the risk contributed by smoking. Amore » measure of all VGDF exposures combined was a strong predictor of COPD risk. Conclusions: Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted« less

A case-control study of airways obstruction among construction workers: Airways Obstruction Among Construction Workers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dement, John; Welch, Laura; Ringen, Knut

Background: While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case-control study estimated the risk of COPD attributable to occupational exposures among construction workers. Methods: The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. Results: Approximately 18% (95%CI=2–24%) of COPD risk can be attributed to construction-related exposures, which are additive to the risk contributed by smoking. Amore » measure of all VGDF exposures combined was a strong predictor of COPD risk. Conclusions: Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted« less

A case-control study of airways obstruction among construction workers.

PubMed

Dement, John; Welch, Laura; Ringen, Knut; Quinn, Patricia; Chen, Anna; Haas, Scott

2015-10-01

While smoking is the major cause of chronic obstructive pulmonary disease (COPD), occupational exposures to vapors, gases, dusts, and fumes (VGDF) increase COPD risk. This case-control study estimated the risk of COPD attributable to occupational exposures among construction workers. The study population included 834 cases and 1243 controls participating in a national medical screening program for older construction workers between 1997 and 2013. Qualitative exposure indices were developed based on lifetime work and exposure histories. Approximately 18% (95% CI = 2-24%) of COPD risk can be attributed to construction-related exposures, which are additive to the risk contributed by smoking. A measure of all VGDF exposures combined was a strong predictor of COPD risk. Construction workers are at increased risk of COPD as a result of broad and complex effects of many exposures acting independently or interactively. Control methods should be implemented to prevent worker exposures, and smoking cessation should be promoted. © 2015 The Authors. American Journal of Industrial Medicine Published by Wiley Periodicals, Inc.

Plasma impact on structural, morphological and optical properties of copper acetylacetonate thin films.

PubMed

Abdel-Khalek, H; El-Samahi, M I; El-Mahalawy, Ahmed M

2018-06-15

The influence of plasma exposure on structural, morphological and optical properties of copper (II) acetylacetonate thin films deposited by thermal evaporation technique was investigated. Copper (II) acetylacetonate as-grown thin films were exposed to the atmospheric plasma for different times. The exposure of as-grown cu(acac) 2 thin film to atmospheric plasma for 5min modified its structural, morphological and optical properties. The effect of plasma exposure on structure and roughness of cu(acac) 2 thin films was evaluated by XRD and AFM techniques, respectively. The XRD results showed an increment in crystallinity due to exposure for 5min, but, when the exposure time reaches 10min, the film was transformed to an amorphous state. The AFM results revealed a strong modification of films roughness when the average roughness decreased from 63.35nm to ~1nm as a result of interaction with plasma. The optical properties of as-grown and plasma exposured cu(acac) 2 thin films were studied using spectrophotometric method. The exposure of cu(acac) 2 thin films to plasma produced the indirect energy gap decrease from 3.20eV to 2.67eV for 10min exposure time. The dispersion parameters were evaluated in terms of single oscillator model for as-grown and plasma exposured thin films. The influence of plasma exposure on third order optical susceptibility was studied. Copyright © 2018 Elsevier B.V. All rights reserved.

The effect of hydrogen on the parameters of plastic deformation localization in low carbon steel

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lunev, Aleksey G., E-mail: agl@ispms.tsc.ru, E-mail: nadjozhkin@ispms.tsc.ru; Nadezhkin, Mikhail V., E-mail: agl@ispms.tsc.ru, E-mail: nadjozhkin@ispms.tsc.ru; Shlyakhova, Galina V., E-mail: shgv@ispms.tsc.ru

2014-11-14

In the present study, the effect of interstitial hydrogen atoms on the mechanical properties and plastic strain localization patterns in tensile tested polycrystals of low-carbon steel Fe-0.07%C has been studied using double exposure speckle photography technique. The main parameters of plastic flow localization at various stages of deformation hardening have been determined in polycrystals of steel electrolytically saturated with hydrogen in a three-electrode electrochemical cell at a controlled constant cathode potential. Also, the effect of hydrogen on changing of microstructure by using optical microscopy has been demonstrated.

Exposure to Local Homicides and Early Educational Achievement in Mexico

ERIC Educational Resources Information Center

Caudillo, Mónica L.; Torche, Florencia

2014-01-01

We investigate the effect of children's exposure to local violence on grade failure in Mexico. We construct an annual panel of all elementary schools from 1990 to 2010 and merge municipality-level homicide rates to analyze the effect of exposure to local homicide. Using a variety of causal inference techniques, we consistently find that exposure…

Techniques to Assess and Mitigate the Environmental Risk Posed by use of Airguns: Recent Advances from Academic Research Programs

NASA Astrophysics Data System (ADS)

Miller, P. J.; Tyack, P. L.; Johnson, M. P.; Madsen, P. T.; King, R.

2006-05-01

There is considerable uncertainty about the ways in which marine mammals might react to noise, the biological significance of reactions, and the effectiveness of planning and real-time mitigation techniques. A planning tool commonly used to assess environmental risk of acoustic activities uses simulations to predict acoustic exposures received by animals, and translates exposure to response using a dose-response function to yield an estimate of the undesired impact on a population. Recent advances show promise to convert this planning tool into a real-time mitigation tool, using Bayesian statistical methods. In this approach, being developed for use by the British Navy, the environmental risk simulation is updated continuously during field operations. The distribution of exposure, set initially based on animal density, is updated in real-time using animal sensing data or environmental data known to correlate with the absence or presence of marine mammals. This conditional probability of animal presence should therefore be more accurate than prior probabilities used during planning, which enables a more accurate and quantitative assessment of both the impact of activities and reduction of impact via mitigation decisions. Two key areas of uncertainty in addition to animal presence/absence are 1.) how biologically-relevant behaviours are affected by exposure to noise, and 2.) whether animals avoid loud noise sources, which is the basis of ramp-up as a mitigation tool. With support from MMS and industry partners, we assessed foraging behaviour and avoidance movements of 8 tagged sperm whales in the Gulf of Mexico during experimental exposure to airguns. The whale that was approached most closely prolonged a surface resting bout hours longer than typical, but resumed foraging immediately after the airguns ceased, suggesting avoidance of deep diving necessary for foraging near active airguns. Behavioral indices of foraging rate (echolocation buzzes produced during prey capture) and locomotion (from pitching movements generated by active swimming) of the 7 remaining exposed whales were compared to sham exposure and post-exposure control periods in 13 unexposed whales. Pitching movements were 6% lower during exposure (P=0.014) with all 7 whales reducing pitching movements. Buzz rates were 19% lower during the exposure condition, but this difference was not statistically significant (P=0.141). The substantial change in mean buzz rate from this small sample motivated a Bayesian analysis, which determined that a model of reduced buzz rate had roughly 3x more posterior support than no effect. Despite the likely impact of airguns on foraging, no avoidance by tagged sperm whales was observed during gradual ramp-up at distances of 7-13km, or full array exposures at 1-13km, calling into question the effectiveness of ramp-up. These results demonstrate that response data can be collected at measured exposure levels, and should motivate additional studies of the effects of airguns on foraging, particularly in waters without such a long history of seismic exploration as the Gulf of Mexico.

Selenium Preferentially Accumulates in the Eye Lens Following Embryonic Exposure: A Confocal X-ray Fluorescence Imaging Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choudhury, Sanjukta; Thomas, Jith; Sylvain, Nicole J.

Maternal transfer of elevated selenium (Se) to offspring is an important route of Se exposure for fish in the natural environment. However, there is a lack of information on the tissue specific spatial distribution and speciation of Se in the early developmental stages of fish, which provide important information about Se toxicokinetics. The effect of maternal transfer of Se was studied by feeding adult zebrafish a Se-elevated or a control diet followed by collection of larvae from both groups. Novel confocal synchrotron-based techniques were used to investigate Se within intact preserved larvae. Confocal X-ray fluorescence imaging was used to comparemore » Se distributions within specific planes of an intact larva from each of the two groups. The elevated Se treatment showed substantially higher Se levels than the control; Se preferentially accumulated to highest levels in the eye lens, with lower levels in the retina, yolk and other tissues. Confocal X-ray absorption spectroscopy was used to determine that the speciation of Se within the eye lens of the intact larva was a selenomethionine-like species. Preferential accumulation of Se in the eye lens may suggest a direct cause-and-effect relationship between exposure to elevated Se and Se-induced ocular impairments reported previously. This study illustrates the effectiveness of confocal X-ray fluorescence methods for investigating trace element distribution and speciation in intact biological specimens« less

The study of the changes in the biochemical and mineral contents of bones of Catla catla due to lead intoxication.

PubMed

Palaniappan, P L R M; Krishnakumar, N; Vadivelu, M; Vijayasundaram, V

2010-02-01

In the present study, an attempt has been made to analyze the changes in the biochemical and mineral contents of lead-intoxicated bones of Catla catla at subchronic (15.5 ppm) exposure, and also to determine whether the effects of Pb intoxication can be reversed with the chelating agent meso 2, 3-dimercaptosuccinic acid (DMSA) on the bones of freshwater fingerlings Catla catla by using Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), and atomic absorption spectrophotometer techniques. The FT-IR spectra of the lead-exposed bones show significant alteration in the biochemical constituents. The XRD analysis showed a decrease in crystallinity due to lead exposure. Further, the Ca, Mg, and P contents of the lead-exposed bones were less than those of the control group, and there was an increase in the mineral contents of the bones after DMSA treatment. In conclusion, the present study suggests that the subchronic lead exposure results in severe loss of bone minerals. The overall decrease in the FT-IR band intensity of Pb-exposed bones relative to the control indicates a decrease in the biochemical constituents like proteins and lipids. The increase in the band intensity after treatment with chelating agent DMSA indicates increased biochemical constituents, showing that the subchronic effects of lead can be reversed by DMSA. The amide I bands observed at 1654 cm(-1) in the present study suggest that the protein is dominated by alpha-helical structure.

Research priorities for the development and implementation of serological tools for malaria surveillance.

PubMed

Elliott, Salenna R; Fowkes, Freya J I; Richards, Jack S; Reiling, Linda; Drew, Damien R; Beeson, James G

2014-01-01

Surveillance is a key component of control and elimination programs. Malaria surveillance has been typically reliant on case reporting by health services, entomological estimates and parasitemia (Plasmodium species) point prevalence. However, these techniques become less sensitive and relatively costly as transmission declines. There is great potential for the development and application of serological biomarkers of malaria exposure as sero-surveillance tools to strengthen malaria control and elimination. Antibodies to malaria antigens are sensitive biomarkers of population-level malaria exposure and can be used to identify hotspots of malaria transmission, estimate transmission levels, monitor changes over time or the impact of interventions on transmission, confirm malaria elimination, and monitor re-emergence of malaria. Sero-surveillance tools could be used in reference laboratories or developed as simple point-of-care tests for community-based surveillance, and different applications and target populations dictate the technical performance required from assays that are determined by properties of antigens and antibody responses. To advance the development of sero-surveillance tools for malaria elimination, major gaps in our knowledge need to be addressed through further research. These include greater knowledge of potential antigens, the sensitivity and specificity of antibody responses, and the longevity of these responses and defining antigens and antibodies that differentiate between exposure to Plasmodium falciparum and P. vivax. Additionally, a better understanding of the influence of host factors, such as age, genetics, and comorbidities on antibody responses in different populations is needed.

Research priorities for the development and implementation of serological tools for malaria surveillance

PubMed Central

Elliott, Salenna R.; Fowkes, Freya J.I.; Richards, Jack S.; Reiling, Linda; Drew, Damien R.

2014-01-01

Surveillance is a key component of control and elimination programs. Malaria surveillance has been typically reliant on case reporting by health services, entomological estimates and parasitemia (Plasmodium species) point prevalence. However, these techniques become less sensitive and relatively costly as transmission declines. There is great potential for the development and application of serological biomarkers of malaria exposure as sero-surveillance tools to strengthen malaria control and elimination. Antibodies to malaria antigens are sensitive biomarkers of population-level malaria exposure and can be used to identify hotspots of malaria transmission, estimate transmission levels, monitor changes over time or the impact of interventions on transmission, confirm malaria elimination, and monitor re-emergence of malaria. Sero-surveillance tools could be used in reference laboratories or developed as simple point-of-care tests for community-based surveillance, and different applications and target populations dictate the technical performance required from assays that are determined by properties of antigens and antibody responses. To advance the development of sero-surveillance tools for malaria elimination, major gaps in our knowledge need to be addressed through further research. These include greater knowledge of potential antigens, the sensitivity and specificity of antibody responses, and the longevity of these responses and defining antigens and antibodies that differentiate between exposure to Plasmodium falciparum and P. vivax. Additionally, a better understanding of the influence of host factors, such as age, genetics, and comorbidities on antibody responses in different populations is needed. PMID:25580254

Evaluation of ultrasonics and optimized radiography for 2219-T87 aluminum weldments

NASA Technical Reports Server (NTRS)

Clotfelter, W. N.; Hoop, J. M.; Duren, P. C.

1975-01-01

Ultrasonic studies are described which are specifically directed toward the quantitative measurement of randomly located defects previously found in aluminum welds with radiography or with dye penetrants. Experimental radiographic studies were also made to optimize techniques for welds of the thickness range to be used in fabricating the External Tank of the Space Shuttle. Conventional and innovative ultrasonic techniques were applied to the flaw size measurement problem. Advantages and disadvantages of each method are discussed. Flaw size data obtained ultrasonically were compared to radiographic data and to real flaw sizes determined by destructive measurements. Considerable success was achieved with pulse echo techniques and with 'pitch and catch' techniques. The radiographic work described demonstrates that careful selection of film exposure parameters for a particular application must be made to obtain optimized flaw detectability. Thus, film exposure techniques can be improved even though radiography is an old weld inspection method.

Automatic irradiation control by an optical feedback technique for selective retina treatment (SRT) in a rabbit model

NASA Astrophysics Data System (ADS)

Seifert, Eric; Roh, Young-Jung; Fritz, Andreas; Park, Young Gun; Kang, Seungbum; Theisen-Kunde, Dirk; Brinkmann, Ralf

2013-06-01

Selective Retina Therapy (SRT) targets the Retinal Pigment Epithelium (RPE) without effecting neighboring layers as the photoreceptors or the choroid. SRT related RPE defects are ophthalmoscopically invisible. Owing to this invisibility and the variation of the threshold radiant exposure for RPE damage the treating physician does not know whether the treatment was successful or not. Thus measurement techniques enabling a correct dosing are a demanded element in SRT devices. The acquired signal can be used for monitoring or automatic irradiation control. Existing monitoring techniques are based on the detection of micro-bubbles. These bubbles are the origin of RPE cell damage for pulse durations in the ns and μs time regime 5μs. The detection can be performed by optical or acoustical approaches. Monitoring based on an acoustical approach has already been used to study the beneficial effects of SRT on diabetic macula edema and central serous retinopathy. We have developed a first real time feedback technique able to detect micro-bubble induced characteristics in the backscattered laser light fast enough to cease the laser irradiation within a burst. Therefore the laser energy within a burst of at most 30 pulses is increased linearly with every pulse. The laser irradiation is ceased as soon as micro-bubbles are detected. With this automatic approach it was possible to observe invisible lesions, an intact photoreceptor layer and a reconstruction of the RPE within one week.

Fuzzy logic particle tracking velocimetry

NASA Technical Reports Server (NTRS)

Wernet, Mark P.

1993-01-01

Fuzzy logic has proven to be a simple and robust method for process control. Instead of requiring a complex model of the system, a user defined rule base is used to control the process. In this paper the principles of fuzzy logic control are applied to Particle Tracking Velocimetry (PTV). Two frames of digitally recorded, single exposure particle imagery are used as input. The fuzzy processor uses the local particle displacement information to determine the correct particle tracks. Fuzzy PTV is an improvement over traditional PTV techniques which typically require a sequence (greater than 2) of image frames for accurately tracking particles. The fuzzy processor executes in software on a PC without the use of specialized array or fuzzy logic processors. A pair of sample input images with roughly 300 particle images each, results in more than 200 velocity vectors in under 8 seconds of processing time.

An environmental transfer hub for multimodal atom probe tomography.

PubMed

Perea, Daniel E; Gerstl, Stephan S A; Chin, Jackson; Hirschi, Blake; Evans, James E

2017-01-01

Environmental control during transfer between instruments is required for samples sensitive to air or thermal exposure to prevent morphological or chemical changes prior to analysis. Atom probe tomography is a rapidly expanding technique for three-dimensional structural and chemical analysis, but commercial instruments remain limited to loading specimens under ambient conditions. In this study, we describe a multifunctional environmental transfer hub allowing controlled cryogenic or room-temperature transfer of specimens under atmospheric or vacuum pressure conditions between an atom probe and other instruments or reaction chambers. The utility of the environmental transfer hub is demonstrated through the acquisition of previously unavailable mass spectral analysis of an intact organic molecule made possible via controlled cryogenic transfer into the atom probe using the hub. The ability to prepare and transfer specimens in precise environments promises a means to access new science across many disciplines from untainted samples and allow downstream time-resolved in situ atom probe studies.

Environmental monitoring using acetylcholinesterase inhibition in vitro. A case study in two Mexican lagoons.

PubMed

Rodríguez-Fuentes, G; Gold-Bouchot, G

2000-01-01

Cholinesterase inhibition is considered a specific biomarker of exposure and effect for organophosphorous pesticides. Its use for monitoring has been hindered, particularly in tropical countries where organophosphates are widely used for malaria and dengue control, because of the frequent lack of suitable controls. An in vitro technique is proposed as a biochemical method for monitoring pollutant mixtures in sediment toxicity tests. Brain homogenate from the fish Oreochromis niloticus is used as the enzyme source. Optimum incubation time, extraction solvent and effect of crude oil on acetylcholinesterase (AChE) are reported. The method described was used in sediments from two Mexican lagoons, located in an oil extraction area where pesticides are used in agriculture and vector control campaigns. AChE inhibitions from 3 to 21% were found in these lagoons, even in the presence of high concentrations of petroleum.

Direct laser writing of a low-loss waveguide with independent control over the transverse dimension and the refractive index contrast between the core and the cladding.

PubMed

Masselin, Pascal; Bychkov, Eugène; Coq, David Le

2016-08-01

In this Letter, we present the realization of a low-loss waveguide in a chalcogenide glass by direct laser writing technique in a particular configuration that allows the independent control over the diameter of the core and the magnitude of the refractive index contrast with the cladding. The waveguide is of multicore type and composed of 19 channels arranged on a hexagonal lattice. Each channel is obtained by stacking voxels of refractive index variation obtained by static exposure to femtosecond laser pulse burst. The distance between the channels can be used to vary the diameter of the waveguide, while the duration of laser burst controls the magnitude of the effective index and the propagation loss. We demonstrate that it can be reduced down to 0.11 dB/cm.

COPD and occupational exposures: a case-control study.

PubMed

Weinmann, Sheila; Vollmer, William M; Breen, Victor; Heumann, Michael; Hnizdo, Eva; Villnave, Jacqueline; Doney, Brent; Graziani, Monica; McBurnie, Mary Ann; Buist, A Sonia

2008-05-01

Evidence demonstrates that occupational exposures are causally linked with chronic obstructive pulmonary disease (COPD). This case-control study evaluated the association between occupational exposures and prevalent COPD based on lifetime occupational history. Cases (n = 388) aged 45 years and older with COPD were compared with controls (n = 356), frequency matched on age, sex, and cigarette smoking history. Odds ratios for exposure to each of eight occupational hazard categories and three composite measures of exposure were computed using logistic regression. RESULTSOccupational exposures most strongly associated with COPD were diesel exhaust, irritant gases and vapors, mineral dust, and metal dust. The composite measures describing aggregate exposure to gases, vapors, solvents, or sensitizers (GVSS) and aggregate exposure to dust, GVSS, or diesel exhaust were also associated with COPD. In the small group of never-smokers, a similar pattern was evident. These population-based findings add to the literature linking occupational exposures to COPD.

Comparison of dust related respiratory effects in Dutch and Canadian grain handling industries: a pooled analysis.

PubMed Central

Peelen, S J; Heederik, D; Dimich-Ward, H D; Chan-Yeung, M; Kennedy, S M

1996-01-01

OBJECTIVES: Four previously conducted epidemiological studies in more than 1200 grain workers were used to compare exposure-response relations between exposure to grain dust and respiratory health. METHODS: The studies included Dutch workers from an animal feed mill and a transfer grain elevator and Canadian workers from a terminal grain elevator and the docks. Relations between forced expiratory volume in one second (FEV1) and exposure were analysed with multiple regression analysis corrected for smoking, age, and height. Exposure variables examined included cumulative and current dust exposure and the numbers of years a subject was employed in the industry. Sampling efficiencies of the Dutch and Canadian measurement techniques were compared in a pilot study. Results of this study were used to correct slopes of exposure-response relations for differences in dust fractions sampled by Dutch and Canadian personal dust samplers. RESULTS: Negative exposure-response relations were shown for regressions of FEV1 on cumulative and current exposure and years employed. Slopes of the exposure-response relations differed by a factor of three to five between industries, apart from results for cumulative exposure. Here the variation in slopes differed by a factor of 100, from -1 to -0.009 ml/mg.y/m3. The variation in slopes between industries reduced to between twofold to fivefold when the Dutch transfer elevator workers were not considered. There was evidence that the small exposure-response slope found for this group is caused by misclassification of exposure and a strong healthy worker effect. Alternative, but less likely explanations for the variation in slopes were differences in exposure concentrations, composition of grain dust, exposure characteristics, and measurement techniques. CONCLUSION: In conclusion, this study showed moderately similar negative exposure-response relations for four different populations from different countries, despite differences in methods of exposure assessment and exposure estimation. PMID:8983468

Comparison of dust related respiratory effects in Dutch and Canadian grain handling industries: a pooled analysis.

PubMed

Peelen, S J; Heederik, D; Dimich-Ward, H D; Chan-Yeung, M; Kennedy, S M

1996-08-01

Four previously conducted epidemiological studies in more than 1200 grain workers were used to compare exposure-response relations between exposure to grain dust and respiratory health. The studies included Dutch workers from an animal feed mill and a transfer grain elevator and Canadian workers from a terminal grain elevator and the docks. Relations between forced expiratory volume in one second (FEV1) and exposure were analysed with multiple regression analysis corrected for smoking, age, and height. Exposure variables examined included cumulative and current dust exposure and the numbers of years a subject was employed in the industry. Sampling efficiencies of the Dutch and Canadian measurement techniques were compared in a pilot study. Results of this study were used to correct slopes of exposure-response relations for differences in dust fractions sampled by Dutch and Canadian personal dust samplers. Negative exposure-response relations were shown for regressions of FEV1 on cumulative and current exposure and years employed. Slopes of the exposure-response relations differed by a factor of three to five between industries, apart from results for cumulative exposure. Here the variation in slopes differed by a factor of 100, from -1 to -0.009 ml/mg.y/m3. The variation in slopes between industries reduced to between twofold to fivefold when the Dutch transfer elevator workers were not considered. There was evidence that the small exposure-response slope found for this group is caused by misclassification of exposure and a strong healthy worker effect. Alternative, but less likely explanations for the variation in slopes were differences in exposure concentrations, composition of grain dust, exposure characteristics, and measurement techniques. In conclusion, this study showed moderately similar negative exposure-response relations for four different populations from different countries, despite differences in methods of exposure assessment and exposure estimation.

Variability in the skin exposure of machine operators exposed to cutting fluids.

PubMed

Wassenius, O; Järvholm, B; Engström, T; Lillienberg, L; Meding, B

1998-04-01

This study describes a new technique for measuring skin exposure to cutting fluids and evaluates the variability of skin exposure among machine operators performing cyclic (repetitive) work. The technique is based on video recording and subsequent analysis of the video tape by means of computer-synchronized video equipment. The time intervals at which the machine operator's hand was exposed to fluid were registered, and the total wet time of the skin was calculated by assuming different evaporation times for the fluid. The exposure of 12 operators with different work methods was analyzed in 6 different workshops, which included a range of machine types, from highly automated metal cutting machines (ie, actual cutting and chip removal machines) requiring operator supervision to conventional metal cutting machines, where the operator was required to maneuver the machine and manually exchange products. The relative wet time varied between 0% and 100%. A significant association between short cycle time and high relative wet time was noted. However, there was no relationship between the degree of automatization of the metal cutting machines and wet time. The study shows that skin exposure to cutting fluids can vary considerably between machine operators involved in manufacturing processes using different types of metal cutting machines. The machine type was not associated with dermal wetness. The technique appears to give objective information about dermal wetness.

Multiple exposure to metals in eight types of welding.

PubMed

Apostoli, P; Porru, S; Brunelli, E; Alessio, L

1997-01-01

This article evaluates multiple exposures to metals in different types of metal welding such as manual metal arc for mild and stainless steel, continuous wire, submerged arc, laser and brazing. Environmental monitoring was carried out in eight different occupational situations and the inductively coupled plasma mass spectrometry technique was adopted in order to characterize exposure to several elements simultaneously and with high accuracy. The results showed that up to 23 elements could be measured. The highest concentrations were found for Al, Mn, Fr, Ni, Cr, Cu and Zn. For some elements such as In, Nd, I, Rb the concentrations were very low. A qualitative and quantitative variation in fume composition was observed at a certain distance from the welding point, which should be to taken into account when evaluating indirect exposures. It would also be possible, with this technique, to identify specific elements in the mixture which could also be measured in biological fluids.

Effects of the use of multi-layer filter on radiation exposure and the quality of upper airway radiographs compared to the traditional copper filter.

PubMed

Klandima, Somphan; Kruatrachue, Anchalee; Wongtapradit, Lawan; Nithipanya, Narong; Ratanaprakarn, Warangkana

2014-06-01

The problem of image quality in a large number of upper airway obstructed patients is the superimposition of the airway over the bone of the spine on the AP view. This problem was resolved by increasing KVp to high KVp technique and adding extra radiographic filters (copper filter) to reduce the sharpness of the bone and increase the clarity of the airway. However, this raises a concern that patients might be receiving an unnecessarily higher dose of radiation, as well as the effectiveness of the invented filter compared to the traditional filter. To evaluate the level of radiation dose that patients receive with the use of multi-layer filter compared to non-filter and to evaluate the image quality of the upper airways between using the radiographic filter (multi-layer filter) and the traditional filter (copperfilter). The attenuation curve of both filter materials was first identified. Then, both the filters were tested with Alderson Rando phantom to determine the appropriate exposure. Using the method described, a new type of filter called the multi-layer filter for imaging patients was developed. A randomized control trial was then performed to compare the effectiveness of the newly developed multi-layer filter to the copper filter. The research was conducted in patients with upper airway obstruction treated at Queen Sirikit National Institute of Child Health from October 2006 to September 2007. A total of 132 patients were divided into two groups. The experimental group used high kVp technique with multi-layer filter, while the control group used copper filter. A comparison of film interpretation between the multi-layer filter and the copper filter was made by a number of radiologists who were blinded to both to the technique and type of filter used. Patients had less radiation from undergoing the kVp technique with copper filter and multi-layer filter compared to the conventional technique, where no filter is used. Patients received approximately 65.5% less radiation dose using high kVp technique with multi-layer filter compared to the conventional technique, and 25.9% less than using the traditional copper filter 45% of the radiologists who participated in this study reported that the high kVp technique with multi-layer filter was better for diagnosing stenosis, or narrowing of the upper airways. 33% reported that, both techniques were equal, while 22% reported that the traditional copper filter allowed for better details of airway obstruction. These findings showed that the multi-layered filter was comparable to the copper filter in terms of film interpretation. Using the multi-layer filter resulted in patients receiving a lower dose of radiation, as well as similar film interpretation when compared to the traditional copper filter.

Childhood Leukemia and 50 Hz Magnetic Fields: Findings from the Italian SETIL Case-Control Study

PubMed Central

Salvan, Alberto; Ranucci, Alessandra; Lagorio, Susanna; Magnani, Corrado

2015-01-01

We report on an Italian case-control study on childhood leukemia and exposure to extremely low frequency magnetic fields (ELF-MF). Eligible for inclusion were 745 leukemia cases, aged 0–10 years at diagnosis in 1998–2001, and 1475 sex- and age-matched population controls. Parents of 683 cases and 1044 controls (92% vs. 71%) were interviewed. ELF-MF measurements (24–48 h), in the child’s bedroom of the dwelling inhabited one year before diagnosis, were available for 412 cases and 587 controls included in the main conditional regression analyses. The magnetic field induction was 0.04 μT on average (geometric mean), with 0.6% of cases and 1.6% of controls exposed to >0.3 μT. The impact of changes in the statistical model, exposure metric, and data-set restriction criteria was explored via sensitivity analyses. No exposure-disease association was observed in analyses based on continuous exposure, while analyses based on categorical variables were characterized by incoherent exposure-outcome relationships. In conclusion, our results may be affected by several sources of bias and they are noninformative at exposure levels >0.3 μT. Nonetheless, the study may contribute to future meta- or pooled analyses. Furthermore, exposure levels among population controls are useful to estimate attributable risk. PMID:25689995

The use of VR in the treatment of panic disorders and agoraphobia.

PubMed

Botella, Cristina; Villa, Helena; García Palacios, Azucena; Quero, Soledad; Baños, Rosa M; Alcaniz, Mariano

2004-01-01

Panic disorder with agoraphobia (PDA) is considered an important public health problem. The efficacy of cognitive-behavioral therapy (CBT) for PDA has been widely demonstrated. The American National Institute of Health recommended Cognitive-Behavioral programs as the treatment of choice for this disorder. This institution also recommended that researchers develop treatments whose mode of delivery increases the availability of these programs. Virtual Reality based treatments can help to achieve this goal. VR has several advantages compared with conventional techniques. One of the essential components to treat these disorders is exposure. In VR the therapist can control the feared situations at will and with a high degree of safety for the patient, as it is easier to grade the feared situations. Another advantage is that VR is more confidential because treatment takes place in the therapist's office. It is also less time consuming as it takes place in the therapist's office. Considering the wide number of situations and activities that agoraphobic patients use to avoid, VR can save time and money significantly. Another advantage in treating PDA using VR is the possibility of doing VR interoceptive. VR could be a more natural setting for interoceptive exposure than the consultation room because we can elicit bodily sensations while the patient is immerse in VR agoraphobic situations. Finally, we think that VR exposure can be a useful intermediate step for those patients who refuse in vivo exposure because the idea of facing the real agoraphobic situations is too aversive for them. In this chapter we offer the work done by our research team at the VEPSY-UPDATED project. We describe the VR program we have developed for the treatment of PDA and we summarize the efficacy and effectiveness data of a study where we compare a cognitive-behavioral program including VR for the exposure component with a standard cognitive-behavioral program including in vivo exposure and with a waiting list control condition. Our findings support the efficacy and effectiveness of VR for the treatment of PDA.

Activation of prefrontal cortex and anterior thalamus in alcoholic subjects on exposure to alcohol-specific cues.

PubMed

George, M S; Anton, R F; Bloomer, C; Teneback, C; Drobes, D J; Lorberbaum, J P; Nahas, Z; Vincent, D J

2001-04-01

Functional imaging studies have recently demonstrated that specific brain regions become active in cocaine addicts when they are exposed to cocaine stimuli. To test whether there are regional brain activity differences during alcohol cue exposure between alcoholic subjects and social drinkers, we designed a functional magnetic resonance imaging (fMRI) protocol involving alcohol-specific cues. Ten non-treatment-seeking adult alcoholic subjects (2 women) (mean [SD] age, 29.9 [9.9] years) as well as 10 healthy social drinking controls of similar age (2 women) (mean [SD] age, 29.4 [8.9] years) were recruited, screened, and scanned. In the 1.5-T magnetic resonance imaging scanner, subjects were serially rated for alcohol craving before and after a sip of alcohol, and after a 9-minute randomized presentation of pictures of alcoholic beverages, control nonalcoholic beverages, and 2 different visual control tasks. During picture presentation, changes in regional brain activity were measured with the blood oxygen level-dependent technique. Alcoholic subjects, compared with the social drinking subjects, reported higher overall craving ratings for alcohol. After a sip of alcohol, while viewing alcohol cues compared with viewing other beverage cues, only the alcoholic subjects had increased activity in the left dorsolateral prefrontal cortex and the anterior thalamus. The social drinkers exhibited specific activation only while viewing the control beverage pictures. When exposed to alcohol cues, alcoholic subjects have increased brain activity in the prefrontal cortex and anterior thalamus-brain regions associated with emotion regulation, attention, and appetitive behavior.

Tumor-based case-control studies of infection and cancer: muddling the when and where of molecular epidemiology.

PubMed

Engels, Eric A; Wacholder, Sholom; Katki, Hormuzd A; Chaturvedi, Anil K

2014-10-01

We describe the "tumor-based case-control" study as a type of epidemiologic study used to evaluate associations between infectious agents and cancer. These studies assess exposure using diseased tissues from affected individuals (i.e., evaluating tumor tissue for cancer cases), but they must utilize nondiseased tissues to assess control subjects, who do not have the disease of interest. This approach can lead to exposure misclassification in two ways. First, concerning the "when" of exposure assessment, retrospective assessment of tissues may not accurately measure exposure at the key earlier time point (i.e., during the etiologic window). Second, concerning the "where" of exposure assessment, use of different tissues in cases and controls can have different accuracy for detecting the exposure (i.e., differential exposure misclassification). We present an example concerning the association of human papillomavirus with various cancers, where tumor-based case-control studies likely overestimate risk associated with infection. In another example, we illustrate how tumor-based case-control studies of Helicobacter pylori and gastric cancer underestimate risk. Tumor-based case-control studies can demonstrate infection within tumor cells, providing qualitative information about disease etiology. However, measures of association calculated in tumor-based case-control studies are prone to over- or underestimating the relationship between infections and subsequent cancer risk. ©2014 American Association for Cancer Research.

An experimental test of the role of control in spider fear.

PubMed

Healey, Andrew; Mansell, Warren; Tai, Sara

2017-06-01

It is well established that uncontrollable adverse experiences lead to increased distress, but the role of client control during psychological interventions such as exposure is less clear. Earlier studies reported inconsistent findings, most likely owing to variations in the way client control was manipulated, degree of exposure, the outcome variables chosen and the follow-up periods used. Importantly, studies to date had suggested to participants that approaching their fears was beneficial thereby biasing their choices and these studies had not measured change beyond the laboratory. We recruited 96 spider-fearful student participants (mean age=22; SD=5.9; Range=18-45; 86 female). The experimental design allowed full choice over their degree of exposure, and manipulated the degree of control as the extent to which their movement of a joystick influenced their virtual distance from a moving spider image. Those with high control were yoked with a low control counterpart to ensure equal amounts of exposure. Measures were elicited at baseline, post-exposure, and at follow-up. As predicted, compared to low control participants, those with high control over exposure approached closer toward a spider post-exposure and reported less spider avoidance after an average of 17days. No group differences were found in physiological or subjective distress during the task, nor in distress and dysfunction. Copyright © 2017 Elsevier Ltd. All rights reserved.

Symptoms in Response to Controlled Diesel Exhaust More Closely Reflect Exposure Perception Than True Exposure

PubMed Central

Carlsten, Chris; Oron, Assaf P.; Curtiss, Heidi; Jarvis, Sara; Daniell, William; Kaufman, Joel D.

2013-01-01

Background Diesel exhaust (DE) exposures are very common, yet exposure-related symptoms haven’t been rigorously examined. Objective Describe symptomatic responses to freshly generated and diluted DE and filtered air (FA) in a controlled human exposure setting; assess whether such responses are altered by perception of exposure. Methods 43 subjects participated within three double-blind crossover experiments to order-randomized DE exposure levels (FA and DE calibrated at 100 and/or 200 micrograms/m3 particulate matter of diameter less than 2.5 microns), and completed questionnaires regarding symptoms and dose perception. Results For a given symptom cluster, the majority of those exposed to moderate concentrations of diesel exhaust do not report such symptoms. The most commonly reported symptom cluster was of the nose (29%). Blinding to exposure is generally effective. Perceived exposure, rather than true exposure, is the dominant modifier of symptom reporting. Conclusion Controlled human exposure to moderate-dose diesel exhaust is associated with a range of mild symptoms, though the majority of individuals will not experience any given symptom. Blinding to DE exposure is generally effective. Perceived DE exposure, rather than true DE exposure, is the dominant modifier of symptom reporting. PMID:24358296

Occupational factors and pancreatic cancer.

PubMed Central

Norell, S; Ahlbom, A; Olin, R; Erwald, R; Jacobson, G; Lindberg-Navier, I; Wiechel, K L

1986-01-01

The relation between occupational factors and pancreatic cancer has been studied by two different approaches: a population based case-control study with two series of controls and a retrospective cohort study based on register data. With both approaches, some support was found for an association with occupational exposure to petroleum products. Associations were also indicated with exposure to paint thinner (case-control study) and work in painting and in paint and varnish factories (cohort study), for exposure to detergents, floor cleaning agents, or polish (case-control study) and with floor polishing or window cleaning (cohort study), and for exposure to refuse (case-control study) and work in refuse disposal plants (cohort study). PMID:3790458

[Health survey of plant workers for an occupational exposure to ammonium perchlorate].

PubMed

Chen, Hong-xia; Shao, Yuan-peng; Wu, Feng-hong; Li, Yang-ping; Peng, Kai-liang

2013-01-01

To understand the occupational hazards of ammonium perchlorate dust on operating workers and to provide the basis preventive measures for protecting the workers' health. 36 workers exposed to ammonium perchlorate dust and 48 unexposed workers from one factory were selected as the exposure and control groups. Investigations on the general condition, sampling of dust in the workplaces and a special medical examination were conducted for two groups, including occupational history, clinical manifestations, blood routine test, hepatic and renal functions, indexes of thyroid hormone, spirometric test and chest X-ray. The total dust concentration of AP in the batch plant reached to 51.63 ± 43.27 mg/m(3), exceeding the U.S. Occupational Safety and Health Administration (OSHA) permission exposure limits. The systolic blood pressure in the exposure group was higher than that of the control group (146.14 ± 21.03 VS 134.67 ± 18.58), and the difference was statistically significant (P < 0.05). The detection rates of the cumulative total symptoms, short of breath and skin itch symptoms in the exposure group were significantly higher than those in the control group (86.11% VS 66.67%; 30.56% VS 12.50%) (P < 0.05), respectively. FT(3) level in the exposure group significantly lowered than the control group, and the difference was statistically significant (P < 0.01); The pulmonary function result showed that FEV1/FVC% in the exposure group was lower than that in the control group (106.50 ± 28.99 VS 111.70 ± 19.72), but the difference was not significant. X-ray examination revealed one case of pulmonary X-ray abnormalities in the exposure group, diagnosis of pneumoconiosis, and one case with about 1.0 × 1.0 small nodules detected on the left of lung door area in the control group. The systolic blood pressure of workers in the exposure group was significantly higher, which could not exclude related to the exposure to AP dust; The T(3) levels in the exposure workers were lower than those in the control group, which may due to AP exposure, suggesting that long-term chronic exposure to AP dust may affect thyroid function.