Science.gov

Sample records for exposure scheme separates

  1. Coastal exposure to oil spill impacts from the Finisterre Traffic Separation Scheme.

    PubMed

    Otero, P; Ruiz-Villarreal, M; Allen-Perkins, S; Vila, B; Cabanas, J M

    2014-08-15

    This study analyzes the coastal exposure to potential oil spills coming from the various corridors that constitute the Finisterre Traffic Separation Scheme (NW Iberia). A Lagrangian model was executed with results from a realistic configuration of an ocean model during 2012, validated here against High-Frequency (HF) radar-derived surface currents. Virtual particles were released each hour and followed during the next 4 days. A series of maps summarize which regions would be impacted and when. We have learnt, for example, that Cape Finisterre is the most affected area under a wide range of scenarios and that a sensitive area such as the National Park of the Atlantic Islands would require protective actions in less than 24 h if oil spills from the south eventually occurred. A complete analysis by corridor and during specific wind events is available through a web tool, which could be useful for decision makers in case of contingency.

  2. Exposure scheme separates effects of electric shock and electric field for honey bees, Apis mellifera L

    SciTech Connect

    Bindokas, V.P.; Gauger, J.R.; Greenberg, B.

    1988-01-01

    Mechanisms to explain disturbance of honey bee colonies under a 765-kV, 60-Hz transmission line (electric (E) field = 7 kV/m) fall into two categories: direct bee perception of enhanced in-hive E fields, and perception of shock from induced currents. The same adverse biological effects previously observed in honey bee colonies exposed under a 765-kV transmission line can be reproduced by exposing worker bees to shock or E field within elongated hive entranceways (= tunnels). Exposure to intense E field caused disturbance only if bees were in contact with a conductive substrate. E-field and shock exposure can be separated and precisely defined within tunnels, eliminating dosimetric vagaries that occur when entire hives are exposed to E field.

  3. Apiary B-Factory separation scheme

    SciTech Connect

    Garren, A. ); Sullivan, M. )

    1991-04-01

    A magnetic beam-separation scheme for an asymmetric-energy B-Factory based on the SLAC electron-positron collider PEP is described that has the following properties: the beams collide head-on and are separated magnetically with sufficient clearance at the parasitic crossing points and at the septum, the magnets have large beam-stay-clear apertures, synchrotron radiation produces low detector backgrounds and acceptable heat loads, and the peak {beta}-function values and contributions to the chromaticities in the IR quadrupoles are moderate. 8 figs., 2 tabs.

  4. APIARY B-Factory Separation Scheme

    SciTech Connect

    Garren, A.; Sullivan, M.

    1991-05-03

    A magnetic beam-separation scheme for an asymmetric-energy B Factory based on the SLAC electron-positron collider PEP is described that has the following properties: the beams collide head-on and are separated magnetically with sufficient clearance at the parasitic crossing points and at the septum, the magnets have large beam-stay-clear apertures, synchrotron radiation produces low detector backgrounds and acceptable heat loads, and the peak {beta}-function values and contributions to the chromaticities in the IR quadrupoles are moderate.

  5. 33 CFR 83.10 - Traffic separation schemes (Rule 10).

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 1 2013-07-01 2013-07-01 false Traffic separation schemes (Rule... Visibility § 83.10 Traffic separation schemes (Rule 10). (a) Obligations under other Rules unaffected. This Rule applies to traffic separation schemes and does not relieve any vessel of her obligation under...

  6. 33 CFR 83.10 - Traffic separation schemes (Rule 10).

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 1 2014-07-01 2014-07-01 false Traffic separation schemes (Rule... Visibility § 83.10 Traffic separation schemes (Rule 10). (a) Obligations under other Rules unaffected. This Rule applies to traffic separation schemes and does not relieve any vessel of her obligation under...

  7. 33 CFR 83.10 - Traffic separation schemes (Rule 10).

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 1 2011-07-01 2011-07-01 false Traffic separation schemes (Rule... Visibility § 83.10 Traffic separation schemes (Rule 10). (a) Obligations under other Rules unaffected. This Rule applies to traffic separation schemes and does not relieve any vessel of her obligation under...

  8. 33 CFR 83.10 - Traffic separation schemes (Rule 10).

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 1 2012-07-01 2012-07-01 false Traffic separation schemes (Rule... Visibility § 83.10 Traffic separation schemes (Rule 10). (a) Obligations under other Rules unaffected. This Rule applies to traffic separation schemes and does not relieve any vessel of her obligation under...

  9. 33 CFR 83.10 - Traffic separation schemes (Rule 10).

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Traffic separation schemes (Rule... Visibility § 83.10 Traffic separation schemes (Rule 10). (a) Obligations under other Rules unaffected. This Rule applies to traffic separation schemes and does not relieve any vessel of her obligation under...

  10. On applications of chimera grid schemes to store separation

    NASA Technical Reports Server (NTRS)

    Cougherty, F. C.; Benek, J. A.; Steger, J. L.

    1985-01-01

    A finite difference scheme which uses multiple overset meshes to simulate the aerodynamics of aircraft/store interaction and store separation is described. In this chimera, or multiple mesh, scheme, a complex configuration is mapped using a major grid about the main component of the configuration, and minor overset meshes are used to map each additional component such as a store. As a first step in modeling the aerodynamics of store separation, two dimensional inviscid flow calculations were carried out in which one of the minor meshes is allowed to move with respect to the major grid. Solutions of calibrated two dimensional problems indicate that allowing one mesh to move with respect to another does not adversely affect the time accuracy of an unsteady solution. Steady, inviscid three dimensional computations demonstrate the capability to simulate complex configurations, including closely packed multiple bodies.

  11. 33 CFR 167.400 - Off San Francisco Traffic Separation Scheme: General.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Separation Scheme: General. 167.400 Section 167.400 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Pacific West Coast § 167.400 Off...

  12. 33 CFR 167.400 - Off San Francisco Traffic Separation Scheme: General.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Separation Scheme: General. 167.400 Section 167.400 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Pacific West Coast § 167.400 Off...

  13. 33 CFR 167.450 - In the Santa Barbara Channel Traffic Separation Scheme: General.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false In the Santa Barbara Channel... Description of Traffic Separation Schemes and Precautionary Areas Pacific West Coast § 167.450 In the Santa Barbara Channel Traffic Separation Scheme: General. The Traffic Separation Scheme in the Santa...

  14. 33 CFR 167.1703 - In Prince William Sound: Valdez Arm Traffic Separation Scheme.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false In Prince William Sound: Valdez Arm Traffic Separation Scheme. 167.1703 Section 167.1703 Navigation and Navigable Waters COAST GUARD... William Sound: Valdez Arm Traffic Separation Scheme. The Valdez Arm Traffic Separation Scheme consists...

  15. 33 CFR 167.1703 - In Prince William Sound: Valdez Arm Traffic Separation Scheme.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false In Prince William Sound: Valdez Arm Traffic Separation Scheme. 167.1703 Section 167.1703 Navigation and Navigable Waters COAST GUARD... William Sound: Valdez Arm Traffic Separation Scheme. The Valdez Arm Traffic Separation Scheme consists...

  16. 33 CFR 167.1703 - In Prince William Sound: Valdez Arm Traffic Separation Scheme.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false In Prince William Sound: Valdez Arm Traffic Separation Scheme. 167.1703 Section 167.1703 Navigation and Navigable Waters COAST GUARD... William Sound: Valdez Arm Traffic Separation Scheme. The Valdez Arm Traffic Separation Scheme consists...

  17. 33 CFR 167.1703 - In Prince William Sound: Valdez Arm Traffic Separation Scheme.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false In Prince William Sound: Valdez Arm Traffic Separation Scheme. 167.1703 Section 167.1703 Navigation and Navigable Waters COAST GUARD... William Sound: Valdez Arm Traffic Separation Scheme. The Valdez Arm Traffic Separation Scheme consists...

  18. 33 CFR 167.1703 - In Prince William Sound: Valdez Arm Traffic Separation Scheme.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false In Prince William Sound: Valdez Arm Traffic Separation Scheme. 167.1703 Section 167.1703 Navigation and Navigable Waters COAST GUARD... William Sound: Valdez Arm Traffic Separation Scheme. The Valdez Arm Traffic Separation Scheme consists...

  19. 33 CFR 167.150 - Off New York Traffic Separation Scheme: General.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Off New York Traffic Separation... HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Atlantic East Coast § 167.150 Off New York...

  20. 33 CFR 167.150 - Off New York Traffic Separation Scheme: General.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false Off New York Traffic Separation... HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Atlantic East Coast § 167.150 Off New York...

  1. 33 CFR 167.150 - Off New York Traffic Separation Scheme: General.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Off New York Traffic Separation... HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Atlantic East Coast § 167.150 Off New York...

  2. 33 CFR 167.150 - Off New York Traffic Separation Scheme: General.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Off New York Traffic Separation... HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Atlantic East Coast § 167.150 Off New York...

  3. 33 CFR 167.150 - Off New York Traffic Separation Scheme: General.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Off New York Traffic Separation... HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Atlantic East Coast § 167.150 Off New York...

  4. 33 CFR 167.252 - In the approaches to the Cape Fear River: Traffic separation scheme.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false In the approaches to the Cape Fear River: Traffic separation scheme. 167.252 Section 167.252 Navigation and Navigable Waters COAST... § 167.252 In the approaches to the Cape Fear River: Traffic separation scheme. (a) A traffic...

  5. 33 CFR 167.252 - In the approaches to the Cape Fear River: Traffic separation scheme.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false In the approaches to the Cape Fear River: Traffic separation scheme. 167.252 Section 167.252 Navigation and Navigable Waters COAST... § 167.252 In the approaches to the Cape Fear River: Traffic separation scheme. (a) A traffic...

  6. 33 CFR 167.252 - In the approaches to the Cape Fear River: Traffic separation scheme.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false In the approaches to the Cape Fear River: Traffic separation scheme. 167.252 Section 167.252 Navigation and Navigable Waters COAST... § 167.252 In the approaches to the Cape Fear River: Traffic separation scheme. (a) A traffic...

  7. 33 CFR 167.252 - In the approaches to the Cape Fear River: Traffic separation scheme.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false In the approaches to the Cape Fear River: Traffic separation scheme. 167.252 Section 167.252 Navigation and Navigable Waters COAST... § 167.252 In the approaches to the Cape Fear River: Traffic separation scheme. (a) A traffic...

  8. 33 CFR 167.450 - In the Santa Barbara Channel Traffic Separation Scheme: General.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false In the Santa Barbara Channel... Barbara Channel Traffic Separation Scheme: General. The Traffic Separation Scheme in the Santa Barbara Channel is described in §§ 167.451 and 167.452. The geographic coordinates in §§ 167.451 and 167.452...

  9. 33 CFR 167.400 - Off San Francisco Traffic Separation Scheme: General.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Off San Francisco Traffic... OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Pacific West Coast § 167.400 Off...

  10. 33 CFR 167.400 - Off San Francisco Traffic Separation Scheme: General.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false Off San Francisco Traffic... OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Pacific West Coast § 167.400 Off...

  11. 33 CFR 167.400 - Off San Francisco Traffic Separation Scheme: General.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Off San Francisco Traffic... OF HOMELAND SECURITY (CONTINUED) PORTS AND WATERWAYS SAFETY OFFSHORE TRAFFIC SEPARATION SCHEMES Description of Traffic Separation Schemes and Precautionary Areas Pacific West Coast § 167.400 Off...

  12. 33 CFR 167.200 - In the approaches to Chesapeake Bay Traffic Separation Scheme: General.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false In the approaches to Chesapeake... § 167.200 In the approaches to Chesapeake Bay Traffic Separation Scheme: General. (a) The traffic separation scheme in the approaches to Chesapeake Bay consists of three parts: a Precautionary Area,...

  13. 33 CFR 167.1702 - In Prince William Sound: Prince William Sound Traffic Separation Scheme.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 33 Navigation and Navigable Waters 2 2013-07-01 2013-07-01 false In Prince William Sound: Prince William Sound Traffic Separation Scheme. 167.1702 Section 167.1702 Navigation and Navigable Waters COAST....1702 In Prince William Sound: Prince William Sound Traffic Separation Scheme. The Prince William...

  14. 33 CFR 167.1702 - In Prince William Sound: Prince William Sound Traffic Separation Scheme.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false In Prince William Sound: Prince William Sound Traffic Separation Scheme. 167.1702 Section 167.1702 Navigation and Navigable Waters COAST....1702 In Prince William Sound: Prince William Sound Traffic Separation Scheme. The Prince William...

  15. 33 CFR 167.1702 - In Prince William Sound: Prince William Sound Traffic Separation Scheme.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false In Prince William Sound: Prince William Sound Traffic Separation Scheme. 167.1702 Section 167.1702 Navigation and Navigable Waters COAST....1702 In Prince William Sound: Prince William Sound Traffic Separation Scheme. The Prince William...

  16. 33 CFR 167.1702 - In Prince William Sound: Prince William Sound Traffic Separation Scheme.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false In Prince William Sound: Prince William Sound Traffic Separation Scheme. 167.1702 Section 167.1702 Navigation and Navigable Waters COAST....1702 In Prince William Sound: Prince William Sound Traffic Separation Scheme. The Prince William...

  17. 33 CFR 167.1702 - In Prince William Sound: Prince William Sound Traffic Separation Scheme.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 33 Navigation and Navigable Waters 2 2011-07-01 2011-07-01 false In Prince William Sound: Prince William Sound Traffic Separation Scheme. 167.1702 Section 167.1702 Navigation and Navigable Waters COAST....1702 In Prince William Sound: Prince William Sound Traffic Separation Scheme. The Prince William...

  18. 33 CFR 167.500 - In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ...-Long Beach Traffic Separation Scheme: General. 167.500 Section 167.500 Navigation and Navigable Waters....500 In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General. The Traffic Separation Scheme in the approaches to Los Angeles-Long Beach consists of three parts: a Precautionary...

  19. 33 CFR 167.500 - In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...-Long Beach Traffic Separation Scheme: General. 167.500 Section 167.500 Navigation and Navigable Waters....500 In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General. The Traffic Separation Scheme in the approaches to Los Angeles-Long Beach consists of three parts: a Precautionary...

  20. 33 CFR 167.500 - In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...-Long Beach Traffic Separation Scheme: General. 167.500 Section 167.500 Navigation and Navigable Waters....500 In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General. The Traffic Separation Scheme in the approaches to Los Angeles-Long Beach consists of three parts: a Precautionary...

  1. 33 CFR 167.500 - In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-Long Beach Traffic Separation Scheme: General. 167.500 Section 167.500 Navigation and Navigable Waters....500 In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General. The Traffic Separation Scheme in the approaches to Los Angeles-Long Beach consists of three parts: a Precautionary...

  2. 33 CFR 167.500 - In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...-Long Beach Traffic Separation Scheme: General. 167.500 Section 167.500 Navigation and Navigable Waters....500 In the approaches to Los Angeles-Long Beach Traffic Separation Scheme: General. The Traffic Separation Scheme in the approaches to Los Angeles-Long Beach consists of three parts: a Precautionary...

  3. 76 FR 23191 - Traffic Separation Schemes: In the Strait of Juan de Fuca and Its Approaches; in Puget Sound and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-26

    ... SECURITY Coast Guard 33 CFR Part 167 RIN 1625-AA48 Traffic Separation Schemes: In the Strait of Juan de... without change its November 19, 2010, interim rule codifying traffic separation schemes in the Strait of..., and the Strait of Georgia. The Coast Guard established these traffic separation schemes...

  4. 76 FR 23193 - Traffic Separation Schemes: In the Approaches to Portland, ME; Boston, MA; Narragansett Bay, RI...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-26

    ... SECURITY Coast Guard 33 CFR Part 167 RIN 1625-AB55 Traffic Separation Schemes: In the Approaches to... change its December 13, 2010, interim rule codifying traffic separation schemes in the approaches to... the traffic separation scheme in the approaches to Chesapeake Bay, VA. The Coast Guard...

  5. 75 FR 77529 - Traffic Separation Schemes: In the Approaches to Portland, ME; Boston, MA; Narragansett Bay, RI...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-12-13

    ... SECURITY Coast Guard 33 CFR Part 167 RIN 1625-AB55 Traffic Separation Schemes: In the Approaches to... rule, the Coast Guard codifies traffic separation schemes in the approaches to Portland, ME; in the... traffic separation scheme in the approaches to Chesapeake Bay, VA. The Coast Guard established...

  6. 75 FR 70818 - Traffic Separation Schemes: In the Strait of Juan de Fuca and Its Approaches; in Puget Sound and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-19

    ... SECURITY Coast Guard 33 CFR Part 167 RIN 1625-AA48 Traffic Separation Schemes: In the Strait of Juan de... this interim rule with request for comments, the Coast Guard codifies traffic separation schemes in the..., Boundary Pass, and the Strait of Georgia. These traffic separation schemes (TSSs) were validated by a...

  7. Precipitation phase separation schemes in the Naqu River basin, eastern Tibetan plateau

    NASA Astrophysics Data System (ADS)

    Liu, Shaohua; Yan, Denghua; Qin, Tianling; Weng, Baisha; Lu, Yajing; Dong, Guoqiang; Gong, Boya

    2016-11-01

    Precipitation phase has a profound influence on the hydrological processes in the Naqu River basin, eastern Tibetan plateau. However, there are only six meteorological stations with precipitation phase (rainfall/snowfall/sleet) before 1979 within and around the basin. In order to separate snowfall from precipitation, a new separation scheme with S-shaped curve of snowfall proportion as an exponential function of daily mean temperature was developed. The determinations of critical temperatures in the single/two temperature threshold (STT/TTT2) methods were explored accordingly, and the temperature corresponding to the 50 % snowfall proportion (SP50 temperature) is an efficiently critical temperature for the STT, and two critical temperatures in TTT2 can be determined based on the exponential function and SP50 temperature. Then, different separation schemes were evaluated in separating snowfall from precipitation in the Naqu River basin. The results show that the S-shaped curve methods outperform other separation schemes. Although the STT and TTT2 slightly underestimate and overestimate the snowfall when the temperature is higher and colder than SP50 temperature respectively, the monthly and annual separation snowfalls are generally consistent with the observed snowfalls. On the whole, S-shaped curve methods, STT, and TTT2 perform well in separating snowfall from precipitation with the Pearson correlation coefficient of annual separation snowfall above 0.8 and provide possible approaches to separate the snowfall from precipitation for hydrological modelling.

  8. Separate O-grouping schemes for serotyping clinical isolates of Proteus vulgaris and Proteus mirabilis.

    PubMed

    Penner, J L; Hennessy, J N

    1980-09-01

    Antisera were prepared against type strains of the original scheme of B. Perch (Acta Pathol. Microbiol. Scand. 25:703-714, 1948) and against newly defined types to produce separate schemes for O-grouping Proteus vulgaris and Proteus mirabilis. In assessing the schemes for their effectiveness it was found that 82% of 208 P. vulgaris isolates and 88% of 194 P. mirabilis isolates from two hospitals were typable. Only 3.4% of the P. vulgaris isolates agglutinated in P. mirabilis antisera, and 1.5% of the P. mirabilis agglutinated in P. vulgaris antisera, indicating that separation of the schemes would be more advantageous in routine typing. P. mirabilis of groups O3, O6, O10, O29, and O30 were most frequently isolated. Of the P. vulgaris isolates, 25% belonged to newly defined O-groups, and one of these was the largest with 14% of all isolates of this species. The application of serotyping using separate schemes for each species was advocated in epidemiological studies.

  9. Adolescent alcohol exposure: Are there separable vulnerable periods within adolescence?

    PubMed

    Spear, Linda Patia

    2015-09-01

    There are two key alcohol use patterns among human adolescents that confer increased vulnerability for later alcohol abuse/dependence, along with neurocognitive alterations: (a) early initiation of use during adolescence, and (b) high rates of binge drinking that are particularly prevalent late in adolescence. The central thesis of this review is that lasting neurobehavioral outcomes of these two adolescent exposure patterns may differ. Although it is difficult to disentangle consequences of early use from later binge drinking in human studies given the substantial overlap between groups, these two types of problematic adolescent use are differentially heritable and hence separable to some extent. Although few studies using animal models have manipulated alcohol exposure age, those studies that have have typically observed timing-specific exposure effects, with more marked (or at least different patterns of) lasting consequences evident after exposures during early-mid adolescence than late-adolescence/emerging adulthood, and effects often restricted to male rats in those few instances where sex differences have been explored. As one example, adult male rats exposed to ethanol during early-mid adolescence (postnatal days [P] 25-45) were found to be socially anxious and to retain adolescent-typical ethanol-induced social facilitation into adulthood, effects that were not evident after exposure during late-adolescence/emerging adulthood (P45-65); exposure at the later interval, however, induced lasting tolerance to ethanol's social inhibitory effects that was not evident after exposure early in adolescence. Females, in contrast, were little influenced by ethanol exposure at either interval. Exposure timing effects have likewise been reported following social isolation as well as after repeated exposure to other drugs such as nicotine (and cannabinoids), with effects often, although not always, more pronounced in males where studied. Consistent with these timing

  10. 33 CFR 167.350 - In the approaches to Galveston Bay Traffic Separation Scheme and precautionary areas.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false In the approaches to Galveston Bay Traffic Separation Scheme and precautionary areas. 167.350 Section 167.350 Navigation and... Atlantic Gulf Coast § 167.350 In the approaches to Galveston Bay Traffic Separation Scheme...

  11. Actuator fault tolerant multi-controller scheme using set separation based diagnosis

    NASA Astrophysics Data System (ADS)

    Seron, María M.; De Doná, José A.

    2010-11-01

    We present a fault tolerant control strategy based on a new principle for actuator fault diagnosis. The scheme employs a standard bank of observers which match the different fault situations that can occur in the plant. Each of these observers has an associated estimation error with distinctive dynamics when an estimator matches the current fault situation of the plant. Based on the information from each observer, a fault detection and isolation (FDI) module is able to reconfigure the control loop by selecting the appropriate control law from a bank of controllers, each of them designed to stabilise and achieve reference tracking for one of the given fault models. The main contribution of this article is to propose a new FDI principle which exploits the separation of sets that characterise healthy system operation from sets that characterise transitions from healthy to faulty behaviour. The new principle allows to provide pre-checkable conditions for guaranteed fault tolerance of the overall multi-controller scheme.

  12. Optimization of separation and detection schemes for DNA with pulsed field slab gel and capillary electrophoresis

    SciTech Connect

    McGregor, David A.

    1993-07-01

    The purpose of the Human Genome Project is outlined followed by a discussion of electrophoresis in slab gels and capillaries and its application to deoxyribonucleic acid (DNA). Techniques used to modify electroosmotic flow in capillaries are addressed. Several separation and detection schemes for DNA via gel and capillary electrophoresis are described. Emphasis is placed on the elucidation of DNA fragment size in real time and shortening separation times to approximate real time monitoring. The migration of DNA fragment bands through a slab gel can be monitored by UV absorption at 254 nm and imaged by a charge coupled device (CCD) camera. Background correction and immediate viewing of band positions to interactively change the field program in pulsed-field gel electrophoresis are possible throughout the separation. The use of absorption removes the need for staining or radioisotope labeling thereby simplifying sample preparation and reducing hazardous waste generation. This leaves the DNA in its native state and further analysis can be performed without de-staining. The optimization of several parameters considerably reduces total analysis time. DNA from 2 kb to 850 kb can be separated in 3 hours on a 7 cm gel with interactive control of the pulse time, which is 10 times faster than the use of a constant field program. The separation of ΦX174RF DNA-HaeIII fragments is studied in a 0.5% methyl cellulose polymer solution as a function of temperature and applied voltage. The migration times decreased with both increasing temperature and increasing field strength, as expected. The relative migration rates of the fragments do not change with temperature but are affected by the applied field. Conditions were established for the separation of the 271/281 bp fragments, even without the addition of intercalating agents. At 700 V/cm and 20°C, all fragments are separated in less than 4 minutes with an average plate number of 2.5 million per meter.

  13. Integrated separation scheme for coal-derived liquids using ion-exchange and adsorption chromatography

    SciTech Connect

    Strachan, M.G.; Johns, R.B.

    1986-02-01

    A separation scheme for coal-derived liquids has been developed that separates by functionality into discrete compound classes using ion-exchange resins; neutrals are further subdivided into fractions differing in polarity, structure, and molecular weight by adsorption chromatography. Sufficient material can be separated to allow further characterization at both gross structural and molecular levels. It gives excellent overall reproducibility (+/- 4%) and recovery (>97%). Removal of acidic and base species prior to recovery of the liquefaction solvent by distillation is a major advantage of the method because it leads to a reduction both in the loss of lower boiling components and in the potential thermal alteration of the sample. The selectivity and discrimination of the procedure are demonstrated for a Victorian brown coal (Loy Yang field) liquefaction product as shown by spectroscopic and chemical analyses of its major fractions. The use of this method as a chemical probe can facilitate investigation of liquefaction mechanisms by enabling a ready selection for analysis of components varying according to a choice of parameters encompassing functionality, polarity, and structure. 29 references, 7 figures, 5 tables.

  14. Efficient Z-scheme charge separation in novel vertically aligned ZnO/CdSSe nanotrees

    NASA Astrophysics Data System (ADS)

    Li, Zhengxin; Nieto-Pescador, Jesus; Carson, Alexander J.; Blake, Jolie C.; Gundlach, Lars

    2016-04-01

    A new tree-like ZnO/CdSSe nanocomposite with CdSSe branches grown on ZnO nanowires prepared via a two-step chemical vapor deposition is presented. The nanotrees (NTs) are vertically aligned on a substrate. The CdSSe branches result in strong visible light absorption and form a type-II heterojunction with the ZnO stem that facilitates efficient electron transfer. A combination of photoluminescence spectroscopy and lifetime measurements indicates that the NTs are promising materials for applications that benefit from a Z-scheme charge transfer mechanism. Vertically aligned branched ZnO nanowires can provide direct electron transport pathways to substrates and allow for efficient charge separation. These advantages of nanoscale hierarchical heterostructures make ZnO/CdSSe NTs a promising semiconductor material for solar cells, and other opto-electronic devices.

  15. Exposure History of Separated Phases from the Kapoeta Meteorite

    SciTech Connect

    Caffee, M W; Nishiizumi, K; Mazarik, J

    2000-01-14

    The cosmogenic radionuclides, {sup 10}Be (1.5 Ma), {sup 26}Al (0.705 Ma), {sup 36}Cl (0.301 Ma), and {sup 53}Mn (3.7 Ma) were measured in selected clasts and matrix samples from the howardite Kapoeta. This work is an extension of that based on {sup 10}Be and {sup 26}Al [1]. Recent work based on measurements of cosmogenic {sup 21}Ne suggest the possibility of a complex recent exposure history for Kapoeta. The measurement of these radionuclides, in conjunction with production rates based on Monte Carlo calculations, can constrain exposure conditions and durations. Taken together, the radionuclide data are entirely consistent with a single stage 4{pi} exposure lasting {approximately} 3 Ma.

  16. Accurate thermochemistry of hydrocarbon radicals via an extended generalized bond separation reaction scheme.

    PubMed

    Wodrich, Matthew D; Corminboeuf, Clémence; Wheeler, Steven E

    2012-04-05

    Detailed knowledge of hydrocarbon radical thermochemistry is critical for understanding diverse chemical phenomena, ranging from combustion processes to organic reaction mechanisms. Unfortunately, experimental thermochemical data for many radical species tend to have large errors or are lacking entirely. Here we develop procedures for deriving high-quality thermochemical data for hydrocarbon radicals by extending Wheeler et al.'s "generalized bond separation reaction" (GBSR) scheme (J. Am. Chem. Soc., 2009, 131, 2547). Moreover, we show that the existing definition of hyperhomodesmotic reactions is flawed. This is because transformation reactions, in which one molecule each from the predefined sets of products and reactants can be converted to a different product and reactant molecule, are currently allowed. This problem is corrected via a refined definition of hyperhomodesmotic reactions in which there are equal numbers of carbon-carbon bond types inclusive of carbon hybridization and number of hydrogens attached. Ab initio and density functional theory (DFT) computations using the expanded GBSRs are applied to a newly derived test set of 27 hydrocarbon radicals (HCR27). Greatly reduced errors in computed reaction enthalpies are seen for hyperhomodesmotic and other highly balanced reactions classes, which benefit from increased matching of hybridization and bonding requirements. The best performing DFT methods for hyperhomodesmotic reactions, M06-2X and B97-dDsC, give average deviations from benchmark computations of only 0.31 and 0.44 (±0.90 and ±1.56 at the 95% confidence level) kcal/mol, respectively, over the test set. By exploiting the high degree of error cancellation provided by hyperhomodesmotic reactions, accurate thermochemical data for hydrocarbon radicals (e.g., enthalpies of formation) can be computed using relatively inexpensive computational methods.

  17. Enhanced sub-micron colloidal particle separation with interdigitated microelectrode arrays using mixed AC/DC dielectrophoretic scheme.

    PubMed

    Swaminathan, Vikhram V; Shannon, Mark A; Bashir, Rashid

    2015-04-01

    Dielectrophoretic separation of particles finds a variety of applications in the capture of species such as cells, viruses, proteins, DNA from biological systems, as well as other organic and inorganic contaminants from water. The ability to capture particles is constrained by poor volumetric scaling of separation force with respect to particle diameter, as well as the weak penetration of electric fields in the media. In order to improve the separation of sub-micron colloids, we present a scheme based on multiple interdigitated electrode arrays under mixed AC/DC bias. The use of high frequency longitudinal AC bias breaks the shielding effects through electroosmotic micromixing to enhance electric fields through the electrolyte, while a transverse DC bias between the electrode arrays enables penetration of the separation force to capture particles from the bulk of the microchannel. We determine the favorable biasing conditions for field enhancement with the help of analytical models, and experimentally demonstrate the improved capture from sub-micron colloidal suspensions with the mixed AC/DC electrostatic excitation scheme over conventional AC-DEP methods.

  18. Comparative study of MacCormack and TVD MacCormack schemes for three-dimensional separation at wing/body junctions in supersonic flows

    NASA Technical Reports Server (NTRS)

    Lakshmanan, Balakrishnan; Tiwari, Surendra N.

    1992-01-01

    A robust, discontinuity-resolving TVD MacCormack scheme containing no dependent parameters requiring adjustment is presently used to investigate the 3D separation of wing/body junction flows at supersonic speeds. Many production codes employing MacCormack schemes can be adapted to use this method. A numerical simulation of laminar supersonic junction flow is found to yield improved separation location predictions, as well as the axial velocity profiles in the separated flow region.

  19. External Quality Assessment Scheme for Biological Monitoring of Occupational Exposure to Toxic Chemicals

    PubMed Central

    Lee, Mi-Young; Kang, Seong-Kyu

    2011-01-01

    Objectives In this study, we summarized the External Quality Assessment Scheme (EQAS) for the biological monitoring of occupational exposure to toxic chemicals which started in 1995 and continued until a 31st round robin in the spring of 2010. The program was performed twice per year until 2009, and this was changed to once a year since 2010. The objective of the program is to ensure the reliability of the data related to biological monitoring from analytical laboratories. Methods One hundred and eighteen laboratories participated in the 31st round robin. The program offers 5 items for inorganic analysis: lead in blood, cadmium in blood, manganese in blood, cadmium in urine, and mercury in urine. It also offers 10 items for organic analysis, including hippuric acid, methylhippuric acid, mandelic acid, phenylglyoxylic acid, N-methylformamide, N-methylacetamide, trichloroacetic acid, total trichloro-compounds, trans,trans-muconic acid, and 2,5-hexanedione in urine. Target values were determined by statistical analysis using consensus values. All the data, such as chromatograms and calibration curves, were reviewed by the committee. Results The proficiency rate was below 70% prior to the first round robin and improved to over 90% for common items, such as PbB and HA, while those for other items still remained in the range of 60-90% and need to be improved up to 90%. Conclusion The EQAS has taken a primary role in improving the reliability of analytical data. A total quality assurance scheme is suggested, including the validation of technical documentation for the whole analytical procedure. PMID:22953206

  20. A Study of Flow Separation in Transonic Flow Using Inviscid and Viscous Computational Fluid Dynamics (CFD) Schemes

    NASA Technical Reports Server (NTRS)

    Rhodes, J. A.; Tiwari, S. N.; Vonlavante, E.

    1988-01-01

    A comparison of flow separation in transonic flows is made using various computational schemes which solve the Euler and the Navier-Stokes equations of fluid mechanics. The flows examined are computed using several simple two-dimensional configurations including a backward facing step and a bump in a channel. Comparison of the results obtained using shock fitting and flux vector splitting methods are presented and the results obtained using the Euler codes are compared to results on the same configurations using a code which solves the Navier-Stokes equations.

  1. Effective beam separation schemes for the measurement of the electric Aharonov-Bohm effect in an ion interferometer.

    PubMed

    Schütz, G; Rembold, A; Pooch, A; Prochel, H; Stibor, A

    2015-11-01

    We propose an experiment for the first proof of the type I electric Aharonov-Bohm effect in an ion interferometer for hydrogen. The performances of three different beam separation schemes are simulated and compared. The coherent ion beam is generated by a single atom tip (SAT) source and separated by either two biprisms with a quadrupole lens, two biprisms with an einzel-lens or three biprisms. The beam path separation is necessary to introduce two metal tubes that can be pulsed with different electric potentials. The high time resolution of a delay line detector allows to work with a continuous ion beam and circumvents the pulsed beam operation as originally suggested by Aharonov and Bohm. We demonstrate that the higher mass and therefore lower velocity of ions compared to electrons combined with the high expected SAT ion emission puts the direct proof of this quantum effect for the first time into reach of current technical possibilities. Thereby a high detection rate of coherent ions is crucial to avoid long integration times that allow the influence of dephasing noise from the environment. We can determine the period of the expected matter wave interference pattern and the signal on the detector by determining the superposition angle of the coherent partial beams. Our simulations were tested with an electron interferometer setup and agree with the experimental results. We determine the separation scheme with three biprisms to be most efficient and predict a total signal acquisition time of only 80s to measure a phase shift from 0 to 2π due to the electric Aharonov-Bohm effect.

  2. Issues of incompatibility of dipole beam separation schemes with EIC physics

    SciTech Connect

    Aschenauer, E.; Kiselev, A.; Parker, B.; Petti, R.

    2015-11-17

    This report addresses the question can the risk of an eRHIC machine be reduced by replacing the crab-cavities through a dipole field in the IR to separate the electron and hadron beams. In the following several scenarios to integrate a separation dipole in the IR design will be described. For each of the scenarios the challenges and problems to realize this in practice will be detailed. In addition the impact on the detector design and the EIC physics program will also be discussed. Several physics requirements need to be integrated into the interaction region design, in order to perform the physics program as described in the EIC White Paper and in the RHIC Design Study. These requirements are also described in detail on a dedicated page of the eRHIC-wiki. The main requirements are described here.

  3. 33 CFR 167.77 - In the approach to Boston, MA: Traffic separation scheme.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... following geographic positions: Latitude Longitude 42°20.73′ N 70°39.06′ W. 42°18.28′ N 70°01.14′ W. 40°49... zone and a line connecting the following geographical positions: Latitude Longitude 40°50.47′ N 68°58... established between the separation zone and a line connecting the following geographical positions:...

  4. 33 CFR 167.77 - In the approach to Boston, MA: Traffic separation scheme.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... following geographic positions: Latitude Longitude 42°20.73′ N 70°39.06′ W. 42°18.28′ N 70°01.14′ W. 40°49... zone and a line connecting the following geographical positions: Latitude Longitude 40°50.47′ N 68°58... established between the separation zone and a line connecting the following geographical positions:...

  5. Exposure to Trauma and Separation Anxiety in Children after the WTC Attack

    ERIC Educational Resources Information Center

    Hoven, Christina W.; Duarte, Cristiane S.; Wu, Ping; Erickson, Elizabeth A.; Musa, George J.; Mandell, Donald J.

    2004-01-01

    The impact of exposure to the World Trade Center attack on children presenting separation anxiety disorder (SAD) 6 months after the attack was studied in a representative sample of New York City public school students (N = 8,236). Probable SAD occurred in 12.3% of the sample and was more frequent in girls, young children, and children who…

  6. Chronic back disability: USAF officers at separation and exposure to +Gz.

    PubMed

    Voge, V M; Tolan, G D; Nixon, W E

    1996-04-01

    This is the second of two studies done to determine whether moderate Gz exposure facilitates back disability. Cumulative trauma (repeated moderate to high G) exposures could be a precipitant of back pain in the military population. There is at present no reliable method of predicting who will suffer from back pain. We looked at officer back disability rates at separation from the Air Force (1972-1993). We compared non-rated Air Force officers to pilots and navigators exposed to low G and moderate to high G. We found no significant differences between aircrew and non-aircrew individuals until 1985, when the rates for aircrew fell below those of non-rated officers. Moderate G exposure does not seem to be a predictor of subsequent back disability. We recommend a larger prospective study of all rated and non-rated officers. We recommend that each separating officer undergo a detailed physical examination and answer a detailed back questionnaire.

  7. Separating sensitivity from exposure in assessing extinction risk from climate change.

    PubMed

    Dickinson, Maria G; Orme, C David L; Suttle, K Blake; Mace, Georgina M

    2014-11-04

    Predictive frameworks of climate change extinction risk generally focus on the magnitude of climate change a species is expected to experience and the potential for that species to track suitable climate. A species' risk of extinction from climate change will depend, in part, on the magnitude of climate change the species experiences, its exposure. However, exposure is only one component of risk. A species' risk of extinction will also depend on its intrinsic ability to tolerate changing climate, its sensitivity. We examine exposure and sensitivity individually for two example taxa, terrestrial amphibians and mammals. We examine how these factors are related among species and across regions and how explicit consideration of each component of risk may affect predictions of climate change impacts. We find that species' sensitivities to climate change are not congruent with their exposures. Many highly sensitive species face low exposure to climate change and many highly exposed species are relatively insensitive. Separating sensitivity from exposure reveals patterns in the causes and drivers of species' extinction risk that may not be evident solely from predictions of climate change. Our findings emphasise the importance of explicitly including sensitivity and exposure to climate change in assessments of species' extinction risk.

  8. Phase separation kinetics in amorphous solid dispersions upon exposure to water.

    PubMed

    Purohit, Hitesh S; Taylor, Lynne S

    2015-05-04

    The purpose of this study was to develop a novel fluorescence technique employing environment-sensitive fluorescent probes to study phase separation kinetics in hydrated matrices of amorphous solid dispersions (ASDs) following storage at high humidity and during dissolution. The initial miscibility of the ASDs was confirmed using infrared (IR) spectroscopy and differential scanning calorimetry (DSC). Fluorescence spectroscopy, as an independent primary technique, was used together with conventional confirmatory techniques including DSC, X-ray diffraction (XRD), fluorescence microscopy, and IR spectroscopy to study phase separation phenomena. By monitoring the emission characteristics of the environment-sensitive fluorescent probes, it was possible to successfully monitor amorphous-amorphous phase separation (AAPS) as a function of time in probucol-poly(vinylpyrrolidone) (PVP) and ritonavir-PVP ASDs after exposure to water. In contrast, a ritonavir-hydroxypropylmethylcellulose acetate succinate (HPMCAS) ASD, did not show AAPS and was used as a control to demonstrate the capability of the newly developed fluorescence method to differentiate systems that showed no phase separation following exposure to water versus those that did. The results from the fluorescence studies were in good agreement with results obtained using various other complementary techniques. Thus, fluorescence spectroscopy can be utilized as a fast and efficient tool to detect and monitor the kinetics of phase transformations in amorphous solid dispersions during hydration and will help provide mechanistic insight into the stability and dissolution behavior of amorphous solid dispersions.

  9. Hybrid isotope separation scheme

    DOEpatents

    Maya, J.

    1991-06-18

    A method is described for yielding selectively a desired enrichment in a specific isotope including the steps of inputting into a spinning chamber a gas from which a scavenger, radiating the gas with a wave length or frequency characteristic of the absorption of a particular isotope of the atomic or molecular gas, thereby inducing a photochemical reaction between the scavenger, and collecting the specific isotope-containing chemical by using a recombination surface or by a scooping apparatus. 2 figures.

  10. Hybrid isotope separation scheme

    DOEpatents

    Maya, Jakob

    1991-01-01

    A method of yielding selectively a desired enrichment in a specific isotope including the steps of inputting into a spinning chamber a gas from which a scavenger, radiating the gas with a wave length or frequency characteristic of the absorption of a particular isotope of the atomic or molecular gas, thereby inducing a photochemical reaction between the scavenger, and collecting the specific isotope-containing chemical by using a recombination surface or by a scooping apparatus.

  11. Chronic Exposure to Particulate Chromate Induces Premature Centrosome Separation and Centriole Disengagement in Human Lung Cells

    PubMed Central

    Martino, Julieta; Holmes, Amie L.; Xie, Hong; Wise, Sandra S.; Wise, John Pierce

    2015-01-01

    Particulate hexavalent chromium (Cr(VI)) is a well-established human lung carcinogen. Lung tumors are characterized by structural and numerical chromosome instability. Centrosome amplification is a phenotype commonly found in solid tumors, including lung tumors, which strongly correlates with chromosome instability. Human lung cells exposed to Cr(VI) exhibit centrosome amplification but the underlying phenotypes and mechanisms remain unknown. In this study, we further characterize the phenotypes of Cr(VI)-induced centrosome abnormalities. We show that Cr(VI)-induced centrosome amplification correlates with numerical chromosome instability. We also show chronic exposure to particulate Cr(VI) induces centrosomes with supernumerary centrioles and acentriolar centrosomes in human lung cells. Moreover, chronic exposure to particulate Cr(VI) affects the timing of important centriolar events. Specifically, chronic exposure to particulate Cr(VI) causes premature centriole disengagement in S and G2 phase cells. It also induces premature centrosome separation in interphase. Altogether, our data suggest that chronic exposure to particulate Cr(VI) targets the protein linkers that hold centrioles together. These centriolar linkers are important for key events of the centrosome cycle and their premature disruption might underlie Cr(VI)-induced centrosome amplification. PMID:26293554

  12. A benchmark for numerical scheme validation of airborne particle exposure in street canyons.

    PubMed

    Marini, S; Buonanno, G; Stabile, L; Avino, P

    2015-02-01

    Measurements of particle concentrations and distributions in terms of number, surface area, and mass were performed simultaneously at eight sampling points within a symmetric street canyon of an Italian city. The aim was to obtain a useful benchmark for validation of wind tunnel experiments and numerical schemes: to this purpose, the influence of wind directions and speeds was considered. Particle number concentrations (PNCs) were higher on the leeward side than the windward side of the street canyon due to the wind vortex effect. Different vertical PNC profiles were observed between the two canyon sides depending on the wind direction and speed at roof level. A decrease in particle concentrations was observed with increasing rooftop wind speed, except for the coarse fraction indicating a possible particle resuspension due to the traffic and wind motion. This study confirms that particle concentration fields in urban street canyons are strongly influenced by traffic emissions and meteorological parameters, especially wind direction and speed.

  13. Separation scheme for selective and quantitative isolation of cobalt from neutron-irradiated biological materials by ion exchange and extraction chromatography

    SciTech Connect

    Dybczynski, R.; Danko, B.; Maleszewska, H.

    1994-01-01

    Highly reliable radiochemical separation scheme for selective and quantitative isolation of trace amounts of cobalt from neutron-irradiated biological materials was elaborated. The method consists in wet-ashing of the sample with HNO{sub 3} + HClO{sub 4} (1:1) mixture plus vanadium salt (oxidation catalyst), removal of silica by evaporation with HF and separation of cobalt from accompanying ions successively on 3 columns with Dowex 1-X8[Cl{sup -}] from 0.5 M HCl, Dowex 1-X8[Cl{sup -}] from 8 M HCl + 2 M MgCl{sub 2} and tri-n-octylphosphine oxide (TOPO) supported on styrene-divinylbenzene copolymer, from 7 M HCl solution, respectively. Cobalt of very high radiochemical purity is finally recovered in 1.2 M HCl solution with practically 100% yield. The separation scheme is universally applicable, to biological samples of both animal and plant origin and was devised to become an integral part of the very accurate ({open_quotes}definitive{close_quotes}) method of cobalt determination by neutron activation analysis (NAA). Preliminary results on Co determination by NAA in some certified reference materials confirmed high reliability of the devised separation scheme.

  14. Integrated separation scheme for measuring a suite of fission and activation products from a fresh mixed fission and activation product sample

    SciTech Connect

    Morley, Shannon M.; Seiner, Brienne N.; Finn, Erin C.; Greenwood, Lawrence R.; Smith, Steven C.; Gregory, Stephanie J.; Haney, Morgan M.; Lucas, Dawn D.; Arrigo, Leah M.; Beacham, Tere A.; Swearingen, Kevin J.; Friese, Judah I.; Douglas, Matthew; Metz, Lori A.

    2015-05-01

    Mixed fission and activation materials resulting from various nuclear processes and events contain a wide range of isotopes for analysis spanning almost the entire periodic table. In some applications such as environmental monitoring, nuclear waste management, and national security a very limited amount of material is available for analysis and characterization so an integrated analysis scheme is needed to measure multiple radionuclides from one sample. This work describes the production of a complex synthetic sample containing fission products, activation products, and irradiated soil and determines the percent recovery of select isotopes through the integrated chemical separation scheme. Results were determined using gamma energy analysis of separated fractions and demonstrate high yields of Ag (76 ± 6%), Au (94 ± 7%), Cd (59 ± 2%), Co (93 ± 5%), Cs (88 ± 3%), Fe (62 ± 1%), Mn (70 ± 7%), Np (65 ± 5%), Sr (73 ± 2%) and Zn (72 ± 3%). Lower yields (< 25%) were measured for Ga, Ir, Sc, and W. Based on the results of this experiment, a complex synthetic sample can be prepared with low atom/fission ratios and isotopes of interest accurately and precisely measured following an integrated chemical separation method.

  15. Improved solar-driven photocatalytic performance of Ag3PO4/ZnO composites benefiting from enhanced charge separation with a typical Z-scheme mechanism

    NASA Astrophysics Data System (ADS)

    Zhong, Junbo; Li, Jianzhang; Wang, Tao; Zeng, Jun; Si, Yujun; Cheng, Chaozhu; Li, Minjiao; Wang, Pei; Ding, Jie

    2016-01-01

    In this work, efficient simulated solar-driven Ag3PO4/ZnO photocatalysts with different molar ratios of Ag/Zn have been prepared by a precipitation method and characterized by X-ray diffraction, UV-Vis diffuse reflectance spectroscopy, scanning electron microscopy, energy-dispersive spectroscopy and surface photovoltage (SPV) spectroscopy. Under simulated sunlight illumination, the Ag3PO4/ZnO composites exhibit enhanced photocatalytic activity compared with the pure ZnO toward the decolorization of rhodamine B (RhB) aqueous solution, and the Ag3PO4/ZnO composite with 4 % Ag/Zn molar ratio exhibits the highest activity. The quenching effects of scavengers indicate that O2•- plays the major role in RhB decolorization. Ag3PO4 deposited on the ZnO surface can promote the separation rate of photoinduced charge carriers, proven by the SPV results. Based on all the observations, the charge separation mechanism with a typical Z-scheme was proposed.

  16. Impact of boundary-layer separation on local exhaust design and worker exposure

    SciTech Connect

    George, D.K.; Flynn, M.R.; Goodman, R.

    1990-01-01

    Flow visualization and tracer gas studies were conducted in a wind tunnel with a mannequin, to examine the phenomenon of boundary layer separation as it relates to a worker's breathing zone concentration. A simple conceptual model was used which was based on mass transport by vortex shedding. The model provided a reasonable estimate of the mannequin breathing zone concentration. An empirical model was developed which then related the measured concentration to the distance from the source to the breathing zone for conditions where the contaminant was released downstream in a uniform flow. The results of the mannequin experiments suggested that boundary layer separation plays a significant part in determining the concentration of contaminant in the breathing zone. The interaction of the separated boundary layer with a contaminant source downstream of a person in uniform flow can pull contaminant back into the breathing zone of the person. The amount of contaminant observed in the breathing zone was much less when the mannequin was positioned such that the air could flow from the side. The turbulent mixing zone was formed more to the side of the mannequin and thus has less opportunity to interact with the contaminant source. These results suggested that in situations such as paint booths where a worker is immersed in a uniform flow, a higher level of control may be achieved by standing to the side of the workpiece.

  17. Assembly of g-C3N4-based type II and Z-scheme heterojunction anodes with improved charge separation for photoelectrojunction water oxidation.

    PubMed

    Wang, Cai-He; Qin, Dong-Dong; Shan, Duo-Liang; Gu, Jing; Yan, Yong; Chen, Jing; Wang, Qiu-Hong; He, Cai-Hua; Li, Yang; Quan, Jing-Jing; Lu, Xiao-Quan

    2017-02-08

    Graphitic carbon nitride (g-C3N4) has been widely studied as a metal-free photocatalyst, leading to some excellent results; however, the rapid recombination of photogenerated charge carriers substantially limits its performance. Here, we establish two types of g-C3N4-based heterojunction (type II and nonmediator assisted Z-scheme) photoanodes on a transparent conducting substrate via coupling with rod-like and nanoparticulate WO3, respectively. In these composites, g-C3N4 film grown by electrophoretic deposition of exfoliated g-C3N4 serves as the host or guest material. The optimized type II WO3/g-C3N4 composite exhibits an enhanced photocurrent of 0.82 mA cm(-2) at 1.23 V vs. RHE and an incident photo-to-current conversion efficiency (IPCE) of 33% as compared with pure WO3 nanorods (0.22 mA cm(-2) for photocurrent and 15% for IPCE). Relative to pure g-C3N4 film (with a photocurrent of several microampere and an IPCE of 2%), a largely improved photocurrent of 0.22 mA cm(-2) and an IPCE of 20% were acquired for the Z-scheme g-C3N4/WO3 composite. The enhancement can be attributed to accelerated charge separation in the heterointerface because of the suitably aligned band gap between WO3 and g-C3N4, as confirmed by optical spectroscopy and ultraviolet photoelectron spectroscopy (UPS) analysis. The photocatalytic process and mechanism of the g-C3N4-based heterojunctions are proposed herein, which potentially explain the origin of the enhanced photoelectrochemical performance. This achievement and the fundamental information supplied here indicate the importance of rationally designing heterojunction photoelectrodes to improve the performance of semiconductors. This is particularly important for materials such as pure g-C3N4 and WO3, as their photoactivities are strongly restricted by high recombination rates.

  18. Effects of maternal separation and methamphetamine exposure on protein expression in the nucleus accumbens shell and core.

    PubMed

    Dimatelis, J J; Russell, V A; Stein, D J; Daniels, W M

    2012-09-01

    Early life adversity has been suggested to predispose an individual to later drug abuse. The core and shell sub-regions of the nucleus accumbens are differentially affected by both stressors and methamphetamine. This study aimed to characterize and quantify methamphetamine-induced protein expression in the shell and core of the nucleus accumbens in animals exposed to maternal separation during early development. Isobaric tagging (iTRAQ) which enables simultaneous identification and quantification of peptides with tandem mass spectrometry (MS/MS) was used. We found that maternal separation altered more proteins involved in structure and redox regulation in the shell than in the core of the nucleus accumbens, and that maternal separation and methamphetamine had differential effects on signaling proteins in the shell and core. Compared to maternal separation or methamphetamine alone, the maternal separation/methamphetamine combination altered more proteins involved in energy metabolism, redox regulatory processes and neurotrophic proteins. Methamphetamine treatment of rats subjected to maternal separation caused a reduction of cytoskeletal proteins in the shell and altered cytoskeletal, signaling, energy metabolism and redox proteins in the core. Comparison of maternal separation/methamphetamine to methamphetamine alone resulted in decreased cytoskeletal proteins in both the shell and core and increased neurotrophic proteins in the core. This study confirms that both early life stress and methamphetamine differentially affect the shell and core of the nucleus accumbens and demonstrates that the combination of early life adversity and later methamphetamine use results in more proteins being affected in the nucleus accumbens than either treatment alone.

  19. Effect of X-ray and ethylnitrosourea exposures separated by 24 h on specific-locus mutation frequency in mouse stem-cell spermatogonia.

    PubMed

    Russell, W L; Carpenter, D A; Hitotsumachi, S

    1988-04-01

    Specific-locus mutation frequencies in mouse stem-cell spermatogonia were determined in 3 experiments in which mature male mice were exposed to 100,m 300, or 500 R of X-rays followed, 24 h later, by intraperitoneal injection of 100 mg/kg of ethylnitrosourea (ENU). The purpose was to find out if the mutation frequencies would be augmented over those expected on the basis of additivity of the effects of the separate treatments. Such augmentation had been observed in earlier work in which exposure to 100 or 500 R of X-rays was followed 24 h later by a second exposure of 500 R. No augmentation was observed for X-rays followed by ENU. The mutation frequencies in all 3 experiments actually fell below those expected on the basis of additivity, although the reductions were not statistically significant.

  20. Assessment of heavy metals exposure, noise and thermal safety in the ambiance of a vacuum metallurgy separation system for recycling heavy metals from crushed e-wastes.

    PubMed

    Zhan, Lu; Xu, Zhenming

    2014-12-01

    Vacuum metallurgy separation (VMS) is a technically feasible method to recover Pb, Cd and other heavy metals from crushed e-wastes. To further determine the environmental impacts and safety of this method, heavy metals exposure, noise and thermal safety in the ambiance of a vacuum metallurgy separation system are evaluated in this article. The mass concentrations of total suspended particulate (TSP) and PM10 are 0.1503 and 0.0973 mg m(-3) near the facilities. The concentrations of Pb, Cd and Sn in TSP samples are 0.0104, 0.1283 and 0.0961 μg m(-3), respectively. Health risk assessments show that the hazard index of Pb is 3.25 × 10(-1) and that of Cd is 1.09 × 10(-1). Carcinogenic risk of Cd through inhalation is 1.08 × 10(-5). The values of the hazard index and risk indicate that Pb and Cd will not cause non-cancerous effects or carcinogenic risk on workers. The noise sources are mainly the mechanical vacuum pump and the water cooling pump. Both of them have the noise levels below 80 dB (A). The thermal safety assessment shows that the temperatures of the vacuum metallurgy separation system surface are all below 303 K after adopting the circulated water cooling and heat insulation measures. This study provides the environmental information of the vacuum metallurgy separation system, which is of assistance to promote the industrialisation of vacuum metallurgy separation for recovering heavy metals from e-wastes.

  1. Exposure to environmental tobacco smoke in restaurants without separate ventilation systems for smoking and nonsmoking dining areas.

    PubMed

    Akbar-Khanzadeh, Farhang

    2003-02-01

    In this study, the author examined (a) levels of airborne pollutants from environmental tobacco smoke in 8 restaurants, and (b) changes in urinary cotinine and nicotine levels among 97 nonsmoking subjects (i.e., 40 restaurant employees, 37 patrons, and 20 referents). Airborne pollutant levels were significantly lower in the control environments than in the nonsmoking dining rooms in which smoking was not permitted, and the levels were significantly lower in the dining rooms in which smoking was not permitted than in the dining rooms in which smoking was permitted. Levels of urinary cotinine and nicotine increased among subjects in the dining rooms in which smoking was permitted, and the increase was significantly greater in employees than patrons. There was a significant positive correlation between levels of urinary nicotine increase and the levels of airborne nicotine and solanesol. The results of this study support the restriction of smoking to designated areas that have separate ventilation systems, or the prohibition of smoking in restaurants.

  2. Phytoremediation of lead (Pb) and arsenic (As) by Melastoma malabathricum L. from contaminated soil in separate exposure.

    PubMed

    Selamat, S Norleela; Abdullah, S Rozaimah Sheikh; Idris, M

    2014-01-01

    This study was conducted to investigate the uptake of lead (Pb) and arsenic (As) from contaminated soil using Melastoma malabathricum L. species. The cultivated plants were exposed to As and Pb in separate soils for an observation period of 70 days. From the results of the analysis, M. malabathricum accumulated relatively high range of As concentration in its roots, up to a maximum of 2800 mg/kg. The highest accumulation of As in stems and leaves was 570 mg/kg of plant. For Pb treatment, the highest concentration (13,800 mg/kg) was accumulated in the roots of plants. The maximum accumulation in stems was 880 mg/kg while maximum accumulation in leaves was 2,200 mg/kg. Only small amounts of Pb were translocated from roots to above ground plant parts (TF < 1). However, a wider range of TF values (0.01-23) for As treated plants proved that the translocation of As from root to above ground parts was greater. However, the high capacity of roots to take up Pb and As (BF > 1) is indicative this plants is a good bioaccumulator for these metals. Therefore, phytostabilisation is the mechanism at work in M. malabathricum's uptake of Pb, while phytoextraction is the dominant mechanism with As.

  3. Novel hybrid isotope separation scheme and apparatus

    DOEpatents

    Maya, Jakob

    1991-01-01

    A method of yielding selectively a desired enrichment in a specific isotope including the steps of inputting into a spinning chamber a gas from which the specific isotope is to be isolated, radiating the gas with frequencies characteristic of the absorption of a particular isotope of the atomic or molecular gas, thereby inducing a photoionization reaction of the desired isotope, and collecting the specific isotope ion by suitable ion collection means.

  4. Novel hybrid isotope separation scheme and apparatus

    DOEpatents

    Maya, J.

    1991-06-18

    A method is described for yielding selectively a desired enrichment in a specific isotope including the steps of inputting into a spinning chamber a gas from which the specific isotope is to be isolated, radiating the gas with frequencies characteristic of the absorption of a particular isotope of the atomic or molecular gas, thereby inducing a photoionization reaction of the desired isotope, and collecting the specific isotope ion by suitable ion collection means. 3 figures.

  5. Development of a new flux splitting scheme

    NASA Technical Reports Server (NTRS)

    Liou, Meng-Sing; Steffen, Christopher J., Jr.

    1991-01-01

    The successful use of a novel splitting scheme, the advection upstream splitting method, for model aerodynamic problems where Van Leer and Roe schemes had failed previously is discussed. The present scheme is based on splitting in which the convective and pressure terms are separated and treated differently depending on the underlying physical conditions. The present method is found to be both simple and accurate.

  6. Development of a new flux splitting scheme

    NASA Technical Reports Server (NTRS)

    Liou, Meng-Sing; Steffen, Christopher J., Jr.

    1991-01-01

    The use of a new splitting scheme, the advection upstream splitting method, for model aerodynamic problems where Van Leer and Roe schemes had failed previously is discussed. The present scheme is based on splitting in which the convective and pressure terms are separated and treated differently depending on the underlying physical conditions. The present method is found to be both simple and accurate.

  7. The Influence of Second-Hand Cigarette Smoke Exposure during Childhood and Active Cigarette Smoking on Crohn’s Disease Phenotype Defined by the Montreal Classification Scheme in a Western Cape Population, South Africa

    PubMed Central

    Chivese, Tawanda; Esterhuizen, Tonya M.; Basson, Abigail Raffner

    2015-01-01

    Background Smoking may worsen the disease outcomes in patients with Crohn’s disease (CD), however the effect of exposure to second-hand cigarette smoke during childhood is unclear. In South Africa, no such literature exists. The aim of this study was to investigate whether disease phenotype, at time of diagnosis of CD, was associated with exposure to second-hand cigarette during childhood and active cigarette smoking habits. Methods A cross sectional examination of all consecutive CD patients seen during the period September 2011-January 2013 at 2 large inflammatory bowel disease centers in the Western Cape, South Africa was performed. Data were collected via review of patient case notes, interviewer-administered questionnaire and clinical examination by the attending gastroenterologist. Disease phenotype (behavior and location) was evaluated at time of diagnosis, according to the Montreal Classification scheme. In addition, disease behavior was stratified as ‘complicated’ or ‘uncomplicated’, using predefined definitions. Passive cigarette smoke exposure was evaluated during 3 age intervals: 0–5, 6–10, and 11–18 years. Results One hundred and ninety four CD patients were identified. Cigarette smoking during the 6 months prior to, or at time of diagnosis was significantly associated with ileo-colonic (L3) disease (RRR = 3.63; 95%CI, 1.32–9.98, p = 0.012) and ileal (L1) disease (RRR = 3.54; 95%CI, 1.06–11.83, p = 0.040) compared with colonic disease. In smokers, childhood passive cigarette smoke exposure during the 0–5 years age interval was significantly associated with ileo-colonic CD location (RRR = 21.3; 95%CI, 1.16–391.55, p = 0.040). No significant association between smoking habits and disease behavior at diagnosis, whether defined by the Montreal scheme, or stratified as ‘complicated’ vs ‘uncomplicated’, was observed. Conclusion Smoking habits were associated with ileo-colonic (L3) and ileal (L1) disease at time of diagnosis in

  8. Separation system

    DOEpatents

    Rubin, Leslie S.

    1986-01-01

    A separation system for dewatering radioactive waste materials includes a disposal container, drive structure for receiving the container, and means for releasably attaching the container to the drive structure. Separation structure disposed in the container adjacent the inner surface of the side wall structure retains solids while allowing passage of liquids. Inlet port structure in the container top wall is normally closed by first valve structure that is centrifugally actuated to open the inlet port and discharge port structure at the container periphery receives liquid that passes through the separation structure and is normally closed by second valve structure that is centrifugally actuated to open the discharge ports. The container also includes coupling structure for releasable engagement with the centrifugal drive structure. Centrifugal force produced when the container is driven in rotation by the drive structure opens the valve structures, and radioactive waste material introduced into the container through the open inlet port is dewatered, and the waste is compacted. The ports are automatically closed by the valves when the container drum is not subjected to centrifugal force such that containment effectiveness is enhanced and exposure of personnel to radioactive materials is minimized.

  9. ATTENUATION OF STATISTICAL RELATIONSHIPS FROM PM COMMUNITY TIME-SERIES EPIDEMIOLOGY DUE TO USE OF COMBINED, RATHER THAN SEPARATE, INDICATORS OF EXPOSURE AND MORTALITY

    EPA Science Inventory

    Attenuation of the statistical relationships between PM and health outcomes may arise from 1) combining exposure indicators, e.g., PM10 instead of PM2.5 and PM10-2.5 or 2) from combining different types of mortality. The Phoenix, AZ data base on air quality offers an opportunity...

  10. Optimal probabilistic dense coding schemes

    NASA Astrophysics Data System (ADS)

    Kögler, Roger A.; Neves, Leonardo

    2017-04-01

    Dense coding with non-maximally entangled states has been investigated in many different scenarios. We revisit this problem for protocols adopting the standard encoding scheme. In this case, the set of possible classical messages cannot be perfectly distinguished due to the non-orthogonality of the quantum states carrying them. So far, the decoding process has been approached in two ways: (i) The message is always inferred, but with an associated (minimum) error; (ii) the message is inferred without error, but only sometimes; in case of failure, nothing else is done. Here, we generalize on these approaches and propose novel optimal probabilistic decoding schemes. The first uses quantum-state separation to increase the distinguishability of the messages with an optimal success probability. This scheme is shown to include (i) and (ii) as special cases and continuously interpolate between them, which enables the decoder to trade-off between the level of confidence desired to identify the received messages and the success probability for doing so. The second scheme, called multistage decoding, applies only for qudits ( d-level quantum systems with d>2) and consists of further attempts in the state identification process in case of failure in the first one. We show that this scheme is advantageous over (ii) as it increases the mutual information between the sender and receiver.

  11. Lasting effects of nicotine treatment and withdrawal on serotonergic systems and cell signaling in rat brain regions: separate or sequential exposure during fetal development and adulthood.

    PubMed

    Slotkin, Theodore A; Ryde, Ian T; Tate, Charlotte A; Seidler, Frederic J

    2007-07-12

    Neurodevelopmental vulnerability to nicotine extends from fetal stages through adolescence. The recently proposed "sensitization-homeostasis" model postulates that, even in adulthood, nicotine treatment permanently reprograms synaptic activity. We administered nicotine to rats throughout gestation or in adulthood (postnatal days PN90-107), using regimens that reproduce plasma levels in smokers, assessing effects on serotonin (5HT) receptors, the 5HT transporter and responses mediated through adenylyl cyclase (AC). Evaluations were then made on PN105, PN110, PN120 and PN180. Prenatal nicotine exposure elicited persistent suppression of 5HT1A receptors and upregulation of 5HT2 receptors, effects that were selective for males and that first emerged in young adulthood. In addition, AC activity was reduced and there was uncoupling of receptor-mediated responses. With nicotine exposure restricted to adulthood, there were few changes in 5HT synaptic proteins during treatment or in the first 2 weeks post-treatment, distinctly different from the robust alterations seen earlier with similar nicotine regimens given in adolescence. Nevertheless, there was long-term upregulation of the proteins in males at 6 months of age; females were unaffected. Exposure to prenatal nicotine followed by adult nicotine overcame the protection of females, so that they, too showed long-term effects not seen with either treatment alone; the effects in males were exacerbated in an additive manner. Our results indicate that the effects of nicotine during prenatal or adolescent stages are indeed distinct from the effects in adults, but that even adults show persistent changes after nicotine exposure, commensurate with the sensitization-homeostasis model. These effects may contribute to lifelong vulnerability to readdiction.

  12. Induction of anchorage-independent growth in primary human cells exposed to protons or HZE ions separately or in dual exposures.

    PubMed

    Sutherland, B M; Cuomo, N C; Bennett, P V

    2005-10-01

    Travelers on space missions will be exposed to a complex radiation environment that includes protons and heavy charged particles. Since protons are present at much higher levels than are heavy ions, the most likely scenario for cellular radiation exposure will be proton exposure followed by a hit by a heavy ion. Although the effects of individual ion species on human cells are being investigated extensively, little is known about the effects of exposure to both radiation types. One useful measure of mammalian cell damage is induction of the ability to grow in a semi-solid agar medium highly inhibitory to the growth of normal human cells, termed neoplastic transformation. Using primary human cells, we evaluated induction of soft-agar growth and survival of cells exposed to protons only or to heavy charged particles (600 MeV/nucleon silicon) only as well as of cells exposed to protons followed after a 4-day interval by silicon ions. Both ions alone efficiently transformed the human cells to anchorage-independent growth. Initial experiments indicate that the dose responses for neoplastic transformation of cells exposed to protons and then after 4 days to silicon ions appear similar to that of cells exposed to silicon ions alone.

  13. Separated Shoulder

    MedlinePlus

    Separated shoulder Overview By Mayo Clinic Staff A separated shoulder is an injury to the ligaments that hold your collarbone (clavicle) to your shoulder blade. In a mild separated shoulder, the ligaments ...

  14. Ultracapacitor separator

    DOEpatents

    Wei, Chang; Jerabek, Elihu Calvin; LeBlanc, Jr., Oliver Harris

    2001-03-06

    An ultracapacitor includes two solid, nonporous current collectors, two porous electrodes separating the collectors, a porous separator between the electrodes and an electrolyte occupying the pores in the electrodes and separator. The electrolyte is a polar aprotic organic solvent and a salt. The porous separator comprises a wet laid cellulosic material.

  15. Simplified Learning Scheme For Analog Neural Network

    NASA Technical Reports Server (NTRS)

    Eberhardt, Silvio P.

    1991-01-01

    Synaptic connections adjusted one at a time in small increments. Simplified gradient-descent learning scheme for electronic neural-network processor less efficient than better-known back-propagation scheme, but offers two advantages: easily implemented in circuitry because data-access circuitry separated from learning circuitry; and independence of data-access circuitry makes possible to implement feedforward as well as feedback networks, including those of multiple-attractor type. Important in such applications as recognition of patterns.

  16. Efficient DSMC collision-partner selection schemes.

    SciTech Connect

    Gallis, Michail A.; Torczynski, John Robert

    2010-07-01

    The effect of collision-partner selection schemes on the accuracy and the efficiency of the Direct Simulation Monte Carlo (DSMC) method of Bird is investigated. Several schemes to reduce the total discretization error as a function of the mean collision separation and the mean collision time are examined. These include the historically first sub-cell scheme, the more recent nearest-neighbor scheme, and various near-neighbor schemes, which are evaluated for their effect on the thermal conductivity for Fourier flow. Their convergence characteristics as a function of spatial and temporal discretization and the number of simulators per cell are compared to the convergence characteristics of the sophisticated and standard DSMC algorithms. Improved performance is obtained if the population from which possible collision partners are selected is an appropriate fraction of the population of the cell.

  17. Efficient DSMC collision-partner selection schemes.

    SciTech Connect

    Gallis, Michail A.; Torczynski, John Robert

    2010-05-01

    The effect of collision-partner selection schemes on the accuracy and the efficiency of the Direct Simulation Monte Carlo (DSMC) method of Bird is investigated. Several schemes to reduce the total discretization error as a function of the mean collision separation and the mean collision time are examined. These include the historically first sub-cell scheme, the more recent nearest-neighbor scheme, and various near-neighbor schemes, which are evaluated for their effect on the thermal conductivity for Fourier flow. Their convergence characteristics as a function of spatial and temporal discretization and the number of simulators per cell are compared to the convergence characteristics of the sophisticated and standard DSMC algorithms. Improved performance is obtained if the population from which possible collision partners are selected is an appropriate fraction of the population of the cell.

  18. Chiral Separations

    NASA Astrophysics Data System (ADS)

    Stalcup, A. M.

    2010-07-01

    The main goal of this review is to provide a brief overview of chiral separations to researchers who are versed in the area of analytical separations but unfamiliar with chiral separations. To researchers who are not familiar with this area, there is currently a bewildering array of commercially available chiral columns, chiral derivatizing reagents, and chiral selectors for approaches that span the range of analytical separation platforms (e.g., high-performance liquid chromatography, gas chromatography, supercritical-fluid chromatography, and capillary electrophoresis). This review begins with a brief discussion of chirality before examining the general strategies and commonalities among all of the chiral separation techniques. Rather than exhaustively listing all the chiral selectors and applications, this review highlights significant issues and differences between chiral and achiral separations, providing salient examples from specific classes of chiral selectors where appropriate.

  19. Water separator

    NASA Technical Reports Server (NTRS)

    Dunn, W. F.; Austin, I. G. (Inventor)

    1964-01-01

    An apparatus for separating liquids from gases or gaseous fluids is described. Features of the apparatus include: (1) the collection and removal of the moisture in the fluid is not dependent upon, or affected by gravity; (2) all the collected water is cyclically drained from the apparatus irrespective of the attitude of the separator; and (3) a fluid actuator is utilized to remove the collected water from the separator.

  20. Battery separators.

    PubMed

    Arora, Pankaj; Zhang, Zhengming John

    2004-10-01

    The ideal battery separator would be infinitesimally thin, offer no resistance to ionic transport in electrolytes, provide infinite resistance to electronic conductivity for isolation of electrodes, be highly tortuous to prevent dendritic growths, and be inert to chemical reactions. Unfortunately, in the real world the ideal case does not exist. Real world separators are electronically insulating membranes whose ionic resistivity is brought to the desired range by manipulating the membranes thickness and porosity. It is clear that no single separator satisfies all the needs of battery designers, and compromises have to be made. It is ultimately the application that decides which separator is most suitable. We hope that this paper will be a useful tool and will help the battery manufacturers in selecting the most appropriate separators for their batteries and respective applications. The information provided is purely technical and does not include other very important parameters, such as cost of production, availability, and long-term stability. There has been a continued demand for thinner battery separators to increase battery power and capacity. This has been especially true for lithiumion batteries used in portable electronics. However, it is very important to ensure the continued safety of batteries, and this is where the role of the separator is greatest. Thus, it is essential to optimize all the components of battery to improve the performance while maintaining the safety of these cells. Separator manufacturers should work along with the battery manufacturers to create the next generation of batteries with increased reliability and performance, but always keeping safety in mind. This paper has attempted to present a comprehensive review of literature on separators used in various batteries. It is evident that a wide variety of separators are available and that they are critical components in batteries. In many cases, the separator is one of the major factors

  1. Methylation of NR3C1 is related to maternal PTSD, parenting stress and maternal medial prefrontal cortical activity in response to child separation among mothers with histories of violence exposure

    PubMed Central

    Schechter, Daniel S.; Moser, Dominik A.; Paoloni-Giacobino, Ariane; Stenz, Ludwig; Gex-Fabry, Marianne; Aue, Tatjana; Adouan, Wafae; Cordero, María I.; Suardi, Francesca; Manini, Aurelia; Sancho Rossignol, Ana; Merminod, Gaëlle; Ansermet, Francois; Dayer, Alexandre G.; Rusconi Serpa, Sandra

    2015-01-01

    Prior research has shown that mothers with Interpersonal violence-related posttraumatic stress disorder (IPV-PTSD) report greater difficulty in parenting their toddlers. Relative to their frequent early exposure to violence and maltreatment, these mothers display dysregulation of their hypothalamic pituitary adrenal axis (HPA-axis), characterized by hypocortisolism. Considering methylation of the promoter region of the glucocorticoid receptor gene NR3C1 as a marker for HPA-axis functioning, with less methylation likely being associated with less circulating cortisol, the present study tested the hypothesis that the degree of methylation of this gene would be negatively correlated with maternal IPV-PTSD severity and parenting stress, and positively correlated with medial prefrontal cortical (mPFC) activity in response to video-stimuli of stressful versus non-stressful mother–child interactions. Following a mental health assessment, 45 mothers and their children (ages 12–42 months) participated in a behavioral protocol involving free-play and laboratory stressors such as mother–child separation. Maternal DNA was extracted from saliva. Interactive behavior was rated on the CARE-Index. During subsequent fMRI scanning, mothers were shown films of free-play and separation drawn from this protocol. Maternal PTSD severity and parenting stress were negatively correlated with the mean percentage of methylation of NR3C1. Maternal mPFC activity in response to video-stimuli of mother–child separation versus play correlated positively to NR3C1 methylation, and negatively to maternal IPV-PTSD and parenting stress. Among interactive behavior variables, child cooperativeness in play was positively correlated with NR3C1 methylation. Thus, the present study is the first published report to our knowledge, suggesting convergence of behavioral, epigenetic, and neuroimaging data that form a psychobiological signature of parenting-risk in the context of early life stress and PTSD

  2. Twin Signature Schemes, Revisited

    NASA Astrophysics Data System (ADS)

    Schäge, Sven

    In this paper, we revisit the twin signature scheme by Naccache, Pointcheval and Stern from CCS 2001 that is secure under the Strong RSA (SRSA) assumption and improve its efficiency in several ways. First, we present a new twin signature scheme that is based on the Strong Diffie-Hellman (SDH) assumption in bilinear groups and allows for very short signatures and key material. A big advantage of this scheme is that, in contrast to the original scheme, it does not require a computationally expensive function for mapping messages to primes. We prove this new scheme secure under adaptive chosen message attacks. Second, we present a modification that allows to significantly increase efficiency when signing long messages. This construction uses collision-resistant hash functions as its basis. As a result, our improvements make the signature length independent of the message size. Our construction deviates from the standard hash-and-sign approach in which the hash value of the message is signed in place of the message itself. We show that in the case of twin signatures, one can exploit the properties of the hash function as an integral part of the signature scheme. This improvement can be applied to both the SRSA based and SDH based twin signature scheme.

  3. Scheme for atomic-state teleportation between two bad cavities

    SciTech Connect

    Zheng Shibiao; Guo Guangcan

    2006-03-15

    A scheme is presented for the long-distance teleportation of an unknown atomic state between two separated cavities. Our scheme works in the regime where the atom-cavity coupling strength is smaller than the cavity decay rate. Thus the requirement on the quality factor of the cavities is greatly relaxed. Furthermore, the fidelity of our scheme is not affected by the detection inefficiency and atomic decay. These advantages are important in view of experiments.

  4. Stereoisomers Separation

    NASA Astrophysics Data System (ADS)

    Wieczorek, Piotr

    The use of capillary electrophoresis for enantiomer separation and optical purity determination is presented. The contents start with basic information about the nature of stereoizomers and the mechanism of enantioseparation using capillary electrophoresis techniques. The molecules to be separated show identical chemical structure and electrochemical behavior. Therefore, the chiral recognition of enantiomers is possible only by bonding to chiral selector and the separation based on very small differences in complexation energies of diastereomer complexes formed. This method is useful for this purpose due to the fact that different compounds can be used as chiral selectors. The mostly used chiral selectors like cyclodextrins, crown ethers, chiral surfactants, macrocyclic antibiotics, transition metal complexes, natural, and synthetic polymers and their application for this purpose is also discussed. Finally, examples of practical applications of electromigration techniques for enantiomers separation and determination are presented.

  5. Mist separator

    SciTech Connect

    Moran, T.M.

    1984-04-17

    An apparatus for the removal of particulates from a flowing gas stream and a process for its use are provided. A perforated screen separator formed as a plate having parallel rows of perforations formed by pushing alternating strips of the plate material forward and backward from the plane of the plate is used. The perforated screen separator may be used alone or with a fiber bed mist eliminator for increased particulate removal.

  6. Product separator

    DOEpatents

    Welsh, Robert A.; Deurbrouck, Albert W.

    1976-01-20

    A secondary light sensitive photoelectric product separator for use with a primary product separator that concentrates a material so that it is visually distinguishable from adjacent materials. The concentrate separation is accomplished first by feeding the material onto a vibratory inclined surface with a liquid flow, such as a wet concentrating table. Vibrations generally perpendicular to the stream direction of flow cause the concentrate to separate from its mixture according to its color. When the concentrate and its surrounding stream reach the recovery end of the table, a detecting device notes the line of color demarcation and triggers a signal if it differs from a normal condition. If no difference is noted nothing moves on the second separator. However, if a difference is detected in the constant monitoring of the color line's location, a product splitter and recovery unit normally positioned near the color line at the recovery end, moves to a new position. In this manner the selected separated concentrate is recovered at a maximum rate regardless of variations in the flow stream or other conditions present.

  7. Tabled Execution in Scheme

    SciTech Connect

    Willcock, J J; Lumsdaine, A; Quinlan, D J

    2008-08-19

    Tabled execution is a generalization of memorization developed by the logic programming community. It not only saves results from tabled predicates, but also stores the set of currently active calls to them; tabled execution can thus provide meaningful semantics for programs that seemingly contain infinite recursions with the same arguments. In logic programming, tabled execution is used for many purposes, both for improving the efficiency of programs, and making tasks simpler and more direct to express than with normal logic programs. However, tabled execution is only infrequently applied in mainstream functional languages such as Scheme. We demonstrate an elegant implementation of tabled execution in Scheme, using a mix of continuation-passing style and mutable data. We also show the use of tabled execution in Scheme for a problem in formal language and automata theory, demonstrating that tabled execution can be a valuable tool for Scheme users.

  8. Map Separates

    USGS Publications Warehouse

    ,

    2001-01-01

    U.S. Geological Survey (USGS) topographic maps are printed using up to six colors (black, blue, green, red, brown, and purple). To prepare your own maps or artwork based on maps, you can order separate black-and-white film positives or negatives for any color printed on a USGS topographic map, or for one or more of the groups of related features printed in the same color on the map (such as drainage and drainage names from the blue plate.) In this document, examples are shown with appropriate ink color to illustrate the various separates. When purchased, separates are black-and-white film negatives or positives. After you receive a film separate or composite from the USGS, you can crop, enlarge or reduce, and edit to add or remove details to suit your special needs. For example, you can adapt the separates for making regional and local planning maps or for doing many kinds of studies or promotions by using the features you select and then printing them in colors of your choice.

  9. On Choosing Multicomponent Multiphase System Separation Progress Optimization Criteria

    NASA Astrophysics Data System (ADS)

    Kulikov, A. M.

    2016-10-01

    The article describes the existing criteria of separation processes optimization. The possibility of application of the general theory of separation for calculation of technological schemes is being justified. The technological, thermodynamical, statistical and economic criteria of separation processes, methods of their analysis and comparison are briefly described. The method of selection of optimization process criteria with technology research, installation engineering schemes and under automatic control of separation processes, as well as statistical planning of extreme experiments was offered.

  10. Simplification of the unified gas kinetic scheme

    NASA Astrophysics Data System (ADS)

    Chen, Songze; Guo, Zhaoli; Xu, Kun

    2016-08-01

    The unified gas kinetic scheme (UGKS) is an asymptotic preserving (AP) scheme for kinetic equations. It is superior for transition flow simulation and has been validated in the past years. However, compared to the well-known discrete ordinate method (DOM), which is a classical numerical method solving the kinetic equations, the UGKS needs more computational resources. In this study, we propose a simplification of the unified gas kinetic scheme. It allows almost identical numerical cost as the DOM, but predicts numerical results as accurate as the UGKS. In the simplified scheme, the numerical flux for the velocity distribution function and the numerical flux for the macroscopic conservative quantities are evaluated separately. The equilibrium part of the UGKS flux is calculated by analytical solution instead of the numerical quadrature in velocity space. The simplification is equivalent to a flux hybridization of the gas kinetic scheme for the Navier-Stokes (NS) equations and the conventional discrete ordinate method. Several simplification strategies are tested, through which we can identify the key ingredient of the Navier-Stokes asymptotic preserving property. Numerical tests show that, as long as the collision effect is built into the macroscopic numerical flux, the numerical scheme is Navier-Stokes asymptotic preserving, regardless the accuracy of the microscopic numerical flux for the velocity distribution function.

  11. ISOTOPE SEPARATORS

    DOEpatents

    Bacon, C.G.

    1958-08-26

    An improvement is presented in the structure of an isotope separation apparatus and, in particular, is concerned with a magnetically operated shutter associated with a window which is provided for the purpose of enabling the operator to view the processes going on within the interior of the apparatus. The shutier is mounted to close under the force of gravity in the absence of any other force. By closing an electrical circuit to a coil mouated on the shutter the magnetic field of the isotope separating apparatus coacts with the magnetic field of the coil to force the shutter to the open position.

  12. Isotope separation

    DOEpatents

    Bartlett, Rodney J.; Morrey, John R.

    1978-01-01

    A method and apparatus is described for separating gas molecules containing one isotope of an element from gas molecules containing other isotopes of the same element in which all of the molecules of the gas are at the same electronic state in their ground state. Gas molecules in a gas stream containing one of the isotopes are selectively excited to a different electronic state while leaving the other gas molecules in their original ground state. Gas molecules containing one of the isotopes are then deflected from the other gas molecules in the stream and thus physically separated.

  13. SEPARATION PROCESS

    DOEpatents

    Stoughton, R.W.

    1961-10-24

    A process for separating tetravalent plutonium from aqueous solutions and from niobium and zirconium by precipitation on lanthanum oxalate is described. The oxalate ions of the precipitate may be decomposed by heating in the presence of an oxidizing agent, forming a plutonium compound readily soluble in acid. (AEC)

  14. Plasma separation

    NASA Technical Reports Server (NTRS)

    Steurer, Wolfgang

    1992-01-01

    This process employs a thermal plasma for the separation and production of oxygen and metals. It is a continuous process that requires no consumables and relies entirely on space resources. The almost complete absence of waste renders it relatively clean. It can be turned on or off without any undesirable side effects or residues. The prime disadvantage is its high power consumption.

  15. Compact Spreader Schemes

    SciTech Connect

    Placidi, M.; Jung, J. -Y.; Ratti, A.; Sun, C.

    2014-07-25

    This paper describes beam distribution schemes adopting a novel implementation based on low amplitude vertical deflections combined with horizontal ones generated by Lambertson-type septum magnets. This scheme offers substantial compactness in the longitudinal layouts of the beam lines and increased flexibility for beam delivery of multiple beam lines on a shot-to-shot basis. Fast kickers (FK) or transverse electric field RF Deflectors (RFD) provide the low amplitude deflections. Initially proposed at the Stanford Linear Accelerator Center (SLAC) as tools for beam diagnostics and more recently adopted for multiline beam pattern schemes, RFDs offer repetition capabilities and a likely better amplitude reproducibility when compared to FKs, which, in turn, offer more modest financial involvements both in construction and operation. Both solutions represent an ideal approach for the design of compact beam distribution systems resulting in space and cost savings while preserving flexibility and beam quality.

  16. Compact spreader schemes

    NASA Astrophysics Data System (ADS)

    Placidi, M.; Jung, J.-Y.; Ratti, A.; Sun, C.

    2014-12-01

    This paper describes beam distribution schemes adopting a novel implementation based on low amplitude vertical deflections combined with horizontal ones generated by Lambertson-type septum magnets. This scheme offers substantial compactness in the longitudinal layouts of the beam lines and increased flexibility for beam delivery of multiple beam lines on a shot-to-shot basis. Fast kickers (FK) or transverse electric field RF Deflectors (RFD) provide the low amplitude deflections. Initially proposed at the Stanford Linear Accelerator Center (SLAC) as tools for beam diagnostics and more recently adopted for multiline beam pattern schemes, RFDs offer repetition capabilities and a likely better amplitude reproducibility when compared to FKs, which, in turn, offer more modest financial involvements both in construction and operation. Both solutions represent an ideal approach for the design of compact beam distribution systems resulting in space and cost savings while preserving flexibility and beam quality.

  17. Gas separating

    DOEpatents

    Gollan, Arye Z.

    1990-12-25

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing.

  18. Gas separating

    DOEpatents

    Gollan, Arye

    1988-01-01

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing.

  19. Dust separator

    SciTech Connect

    Borow, H.

    1987-01-27

    This patent describes a gas filter apparatus for separating solids from a gas stream comprising a housing having a top, base, and side walls defining a chamber, a partition wall extending across the chamber and separating the chamber into an upper compartment and a lower compartment. A gas inlet conveyor tube in the chamber passes downwardly of the partition and into the lower compartment, the portion of the conveyor tube passing through the upper compartment being impervious and the portion of the conveyor tube extending downwardly into the lower compartment being provided with exit means including exit apertures at least in the area of the conveyor tube adjacent the partition wall. The partition wall is provided with openings surrounding the conveyor tube and communicates the lower compartment with the upper compartment. A filter means in the form of filter tubes covers each opening in the partition wall and extends downwardly in the lower compartment and parallel to the conveyor tube, at least one gas outlet communicating with the upper compartment. A suction means is associated with the gas outlet to provide a reduced pressure within the chamber. A discharge means at the base of the housing is associated with the lower compartment for discharging solid matter separated from the gas stream. The solid laden gas is conveyed into the lower compartment downwardly by the conveying tube and the gas of the stream is drawn from the conveyor tube immediately past the partition, through the surrounding filter tubes in order to prevent the formation of counter gas flows to the gravity discharge of the solids being separated from the gas stream.

  20. Check-Digit Schemes.

    ERIC Educational Resources Information Center

    Wheeler, Mary L.

    1994-01-01

    Discusses the study of identification codes and check-digit schemes as a way to show students a practical application of mathematics and introduce them to coding theory. Examples include postal service money orders, parcel tracking numbers, ISBN codes, bank identification numbers, and UPC codes. (MKR)

  1. A generalized well management scheme for reservoir simulation

    SciTech Connect

    Fang, W.Y.; Lo, K.K.

    1995-12-31

    A new generalized well management scheme has been formulated to maximize oil production under multiple facility constraints. The scheme integrates reserve performance, wellbore hydraulics, surface facility constraints and lift-gas allocation o maximize oil production. It predicts well performance based on up-to-date hydraulics and reservoir conditions. The scheme has been implemented in a black oil simulator by using Separable programming and Simplex algorithm. This production optimization scheme has been applied to two full-field models. The oil production of these two full-field models is limited by water, gas and liquid haling limits at both field- and flow station-levels. The gas production is limited by injectivity as well as gas handling limits. For a 12-year production forecast on Field A, the new scheme increased oil production by 3 to 9%. For a 12-year production forecast on field B, the new scheme increased oil production by 7 to 9%.

  2. Gas separating

    DOEpatents

    Gollan, A.

    1988-03-29

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing. 3 figs.

  3. Gas separating

    DOEpatents

    Gollan, A.Z.

    1990-12-25

    Feed gas is directed tangentially along the non-skin surface of gas separation membrane modules comprising a cylindrical bundle of parallel contiguous hollow fibers supported to allow feed gas to flow from an inlet at one end of a cylindrical housing through the bores of the bundled fibers to an outlet at the other end while a component of the feed gas permeates through the fibers, each having the skin side on the outside, through a permeate outlet in the cylindrical casing. 3 figs.

  4. Hybridization schemes for clusters

    NASA Astrophysics Data System (ADS)

    Wales, David J.

    The concept of an optimum hybridization scheme for cluster compounds is developed with particular reference to electron counting. The prediction of electron counts for clusters and the interpretation of the bonding is shown to depend critically upon the presumed hybridization pattern of the cluster vertex atoms. This fact has not been properly appreciated in previous work, particularly in applications of Stone's tensor surface harmonic (TSH) theory, but is found to be a useful tool when dealt with directly. A quantitative definition is suggested for the optimum cluster hybridization pattern based directly upon the ease of interpretation of the molecular orbitals, and results are given for a range of species. The relationship of this scheme to the detailed cluster geometry is described using Löwdin's partitioned perturbation theory, and the success and range of application of TSH theory are discussed.

  5. Particle separator

    DOEpatents

    Hendricks, Charles D.

    1990-01-01

    Method and apparatus (10) are provided for separating and classifying particles (48,50,56) by dispersing the particles within a fluid (52) that is upwardly flowing within a cone-shaped pipe (12) that has its large end (20) above its small end (18). Particles of similar size and shape (48,50) migrate to individual levels (A,B) within the flowing fluid. As the fluid is deflected by a plate (42) at the top end of the pipe (12), the smallest particles are collected on a shelf-like flange (40). Ever larger particles are collected as the flow rate of the fluid is increased. To prevent particle sticking on the walls (14) of the pipe (12), additional fluid is caused to flow into the pipe (12) through holes (68) that are specifically provided for that purpose. Sticking is further prevented by high frequency vibrators (70) that are positioned on the apparatus (10).

  6. Particle separation

    DOEpatents

    Moosmuller, Hans [Reno, NV; Chakrabarty, Rajan K [Reno, NV; Arnott, W Patrick [Reno, NV

    2011-04-26

    Embodiments of a method for selecting particles, such as based on their morphology, is disclosed. In a particular example, the particles are charged and acquire different amounts of charge, or have different charge distributions, based on their morphology. The particles are then sorted based on their flow properties. In a specific example, the particles are sorted using a differential mobility analyzer, which sorts particles, at least in part, based on their electrical mobility. Given a population of particles with similar electrical mobilities, the disclosed process can be used to sort particles based on the net charge carried by the particle, and thus, given the relationship between charge and morphology, separate the particles based on their morphology.

  7. Particle separation

    NASA Technical Reports Server (NTRS)

    Moosmuller, Hans (Inventor); Chakrabarty, Rajan K. (Inventor); Arnott, W. Patrick (Inventor)

    2011-01-01

    Embodiments of a method for selecting particles, such as based on their morphology, is disclosed. In a particular example, the particles are charged and acquire different amounts of charge, or have different charge distributions, based on their morphology. The particles are then sorted based on their flow properties. In a specific example, the particles are sorted using a differential mobility analyzer, which sorts particles, at least in part, based on their electrical mobility. Given a population of particles with similar electrical mobilities, the disclosed process can be used to sort particles based on the net charge carried by the particle, and thus, given the relationship between charge and morphology, separate the particles based on their morphology.

  8. Scalable Nonlinear Compact Schemes

    SciTech Connect

    Ghosh, Debojyoti; Constantinescu, Emil M.; Brown, Jed

    2014-04-01

    In this work, we focus on compact schemes resulting in tridiagonal systems of equations, specifically the fifth-order CRWENO scheme. We propose a scalable implementation of the nonlinear compact schemes by implementing a parallel tridiagonal solver based on the partitioning/substructuring approach. We use an iterative solver for the reduced system of equations; however, we solve this system to machine zero accuracy to ensure that no parallelization errors are introduced. It is possible to achieve machine-zero convergence with few iterations because of the diagonal dominance of the system. The number of iterations is specified a priori instead of a norm-based exit criterion, and collective communications are avoided. The overall algorithm thus involves only point-to-point communication between neighboring processors. Our implementation of the tridiagonal solver differs from and avoids the drawbacks of past efforts in the following ways: it introduces no parallelization-related approximations (multiprocessor solutions are exactly identical to uniprocessor ones), it involves minimal communication, the mathematical complexity is similar to that of the Thomas algorithm on a single processor, and it does not require any communication and computation scheduling.

  9. Pentagraph image fusion scheme for motion blur prevention using multiple monochromatic images.

    PubMed

    Volfman, Alon A; Mendlovic, David; Raz, Ariel

    2016-04-10

    This paper introduces the pentagraph image fusion (PIF) scheme for motion-related blur prevention in images. The PIF algorithm processes five monochromatic images into a single, low-noise, no-blur color image. The images are acquired using a new photography scheme, sequential filter photography (SFP), where instead of using a stationary Bayer pattern color filter array in front of the image sensor, a tunable color filter array is used. Using this approach, several monochromatic images are captured one by one and later fused into one color image. The SFP introduces various advantages such as higher resolution, better SNR, and the ability to control both exposure time and color filter separately for each image. The PIF algorithm harnesses all the advantages of SFP for the first time, to the best of our knowledge, in the field of blur-free image acquisition. Five images are taken with controllable exposure time and color filter, three images for the color bands, and two high-signal panchromatic images. These images are fused together to be a single, low-noise, no-blur color image. The algorithm presents a generic approach of dealing with both local and global motion blur and does not require any user intervention.

  10. Modulation scheme for electron-electron double resonance spectroscopy

    NASA Astrophysics Data System (ADS)

    Mehlkopf, A. F.; Kuiper, F. G.; Smidt, J.; Tiggelman, T. A.

    1983-06-01

    A modulation scheme for electron-electron double resonance (ELDOR) spectrometers is presented. With this scheme an optimum stabilization signal for locking the pump microwave generator to the pumped electron paramagnetic resonance (EPR) line is generated. A separate pump power level and a separate magnetic field modulation amplitude are used for the purpose of locking. In general, such a modulation scheme introduces false ELDOR lines. These false lines disturb the real ELDOR signals, or introduce an ELDOR signal in the absence of any communication between the observed EPR line and the pumped EPR line. With the described modulation scheme the frequencies of the false ELDOR signals are limited to even multiples of the frequency of the wanted ELDOR signals. This makes a suppression of the false ELDOR lines easy.

  11. Massive momentum-subtraction scheme

    NASA Astrophysics Data System (ADS)

    Boyle, Peter; Del Debbio, Luigi; Khamseh, Ava

    2017-03-01

    A new renormalization scheme is defined for fermion bilinears in QCD at nonvanishing quark masses. This new scheme, denoted RI/mSMOM, preserves the benefits of the nonexceptional momenta introduced in the RI/SMOM scheme and allows a definition of renormalized composite fields away from the chiral limit. Some properties of the scheme are investigated by performing explicit one-loop computation in dimensional regularization.

  12. ESCAP mobile training scheme.

    PubMed

    Yasas, F M

    1977-01-01

    In response to a United Nations resolution, the Mobile Training Scheme (MTS) was set up to provide training to the trainers of national cadres engaged in frontline and supervisory tasks in social welfare and rural development. The training is innovative in its being based on an analysis of field realities. The MTS team consisted of a leader, an expert on teaching methods and materials, and an expert on action research and evaluation. The country's trainers from different departments were sent to villages to work for a short period and to report their problems in fulfilling their roles. From these grass roots experiences, they made an analysis of the job, determining what knowledge, attitude and skills it required. Analysis of daily incidents and problems were used to produce indigenous teaching materials drawn from actual field practice. How to consider the problems encountered through government structures for policy making and decisions was also learned. Tasks of the students were to identify the skills needed for role performance by job analysis, daily diaries and project histories; to analyze the particular community by village profiles; to produce indigenous teaching materials; and to practice the role skills by actual role performance. The MTS scheme was tried in Nepal in 1974-75; 3 training programs trained 25 trainers and 51 frontline workers; indigenous teaching materials were created; technical papers written; and consultations were provided. In Afghanistan the scheme was used in 1975-76; 45 participants completed the training; seminars were held; and an ongoing Council was created. It is hoped that the training program will be expanded to other countries.

  13. Collaborative Protection and Control Schemes for Shipboard Electrical Systems

    DTIC Science & Technology

    2007-03-26

    Based System Protection The envisioned scheme uses the converters (which are voltage source type) as switches ( circuit breakers ) to limit and interrupt...use of VSC as CB ( circuit breaker ) is significant, mainly: i) It eliminates the need to use separate circuit breakers that need to be developed...this fast acting VSC based circuit breakers however introduces a new challenge, that the protection scheme should be able to detect and locate the

  14. New LNG process scheme

    SciTech Connect

    Foglietta, J.H.

    1999-07-01

    A new LNG cycle has been developed for base load liquefaction facilities. This new design offers a different technical and economical solution comparing in efficiency with the classical technologies. The new LNG scheme could offer attractive business opportunities to oil and gas companies that are trying to find paths to monetize gas sources more effectively; particularly for remote or offshore locations where smaller scale LNG facilities might be applicable. This design offers also an alternative route to classic LNG projects, as well as alternative fuel sources. Conceived to offer simplicity and access to industry standard equipment, This design is a hybrid result of combining a standard refrigeration system and turboexpander technology.

  15. A Secure and Efficient Threshold Group Signature Scheme

    NASA Astrophysics Data System (ADS)

    Zhang, Yansheng; Wang, Xueming; Qiu, Gege

    The paper presents a secure and efficient threshold group signature scheme aiming at two problems of current threshold group signature schemes: conspiracy attack and inefficiency. Scheme proposed in this paper takes strategy of separating designed clerk who is responsible for collecting and authenticating each individual signature from group, the designed clerk don't participate in distribution of group secret key and has his own public key and private key, designed clerk needs to sign part information of threshold group signature after collecting signatures. Thus verifier has to verify signature of the group after validating signature of the designed clerk. This scheme is proved to be secure against conspiracy attack at last and is more efficient by comparing with other schemes.

  16. Improved-efficiency DSMC collision-partner selection schemes.

    SciTech Connect

    Gallis, Michail A.; Torczynski, John Robert

    2010-11-01

    The effect of collision-partner selection schemes on the accuracy and the efficiency of the Direct Simulation Monte Carlo (DSMC) method of Bird is investigated. Several schemes to reduce the total discretization error as a function of the mean collision separation and the mean collision time are examined. These include the historically first sub-cell scheme, the more recent nearest-neighbor scheme, and various near-neighbor schemes, which are evaluated for their effect on the thermal conductivity for Fourier flow. Their convergence characteristics as a function of spatial and temporal discretization and the number of simulators per cell are compared to the convergence characteristics of the sophisticated and standard DSMC algorithms. Improved performance is obtained if the population from which possible collision partners are selected is an appropriate fraction of the population of the cell.

  17. 40 CFR 63.1042 - Standards-Separator fixed roof.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... its vapors managed in the separator; the effects of outdoor exposure to wind, moisture, and sunlight... be made of suitable materials that will minimize exposure of the regulated-material to the...

  18. On Some Numerical Dissipation Schemes

    NASA Technical Reports Server (NTRS)

    Swanson, R. C.; Radespiel, R.; Turkel, E.

    1998-01-01

    Several schemes for introducing an artificial dissipation into a central difference approximation to the Euler and Navier Stokes equations are considered. The focus of the paper is on the convective upwind and split pressure (CUSP) scheme, which is designed to support single interior point discrete shock waves. This scheme is analyzed and compared in detail with scalar dissipation and matrix dissipation (MATD) schemes. Resolution capability is determined by solving subsonic, transonic, and hypersonic flow problems. A finite-volume discretization and a multistage time-stepping scheme with multigrid are used to compute solutions to the flow equations. Numerical solutions are also compared with either theoretical solutions or experimental data. For transonic airfoil flows the best accuracy on coarse meshes for aerodynamic coefficients is obtained with a simple MATD scheme. The coarse-grid accuracy for the original CUSP scheme is improved by modifying the limiter function used with the scheme, giving comparable accuracy to that obtained with the MATD scheme. The modifications reduce the background dissipation and provide control over the regions where the scheme can become first order.

  19. Permanent, sex-selective effects of prenatal or adolescent nicotine exposure, separately or sequentially, in rat brain regions: indices of cholinergic and serotonergic synaptic function, cell signaling, and neural cell number and size at 6 months of age.

    PubMed

    Slotkin, Theodore A; MacKillop, Emiko A; Rudder, Charles L; Ryde, Ian T; Tate, Charlotte A; Seidler, Frederic J

    2007-05-01

    Nicotine is a neuroteratogen that disrupts neurodevelopment and synaptic function, with vulnerability extending into adolescence. We assessed the permanence of effects in rats on indices of neural cell number and size, and on acetylcholine and serotonin (5HT) systems, conducting assessments at 6 months of age, after prenatal nicotine exposure, adolescent exposure, or sequential exposure in both periods. For prenatal nicotine, indices of cell number and size showed few abnormalities by 6 months, but there were persistent deficits in cerebrocortical choline acetyltransferase activity and hemicholinium-3 binding to the presynaptic choline transporter, a pattern consistent with cholinergic hypoactivity; these effects were more prominent in males than females. The expression of 5HT receptors also showed permanent effects in males, with suppression of the 5HT(1A) subtype and upregulation of 5HT(2) receptors. In addition, cell signaling through adenylyl cyclase showed heterologous uncoupling of neurotransmitter responses. Nicotine exposure in adolescence produced lasting effects that were similar to those of prenatal nicotine. However, when animals were exposed to prenatal nicotine and received nicotine subsequently in adolescence, the adverse effects then extended to females, whereas the net effect in males was similar to that of prenatal nicotine by itself. Our results indicate that prenatal or adolescent nicotine exposure evoke permanent changes in synaptic function that transcend the recovery of less-sensitive indices of structural damage; further, prenatal exposure sensitizes females to the subsequent adverse effects of adolescent nicotine, thus creating a population that may be especially vulnerable to the lasting behavioral consequences of nicotine intake in adolescence.

  20. SIMULATING ATMOSPHERIC EXPOSURE USING AN INNOVATIVE METEOROLOGICAL SAMPLING SCHEME

    EPA Science Inventory

    Multimedia Risk assessments require the temporal integration of atmospheric concentration and deposition estimates with other media modules. However, providing an extended time series of estimates is computationally expensive. An alternative approach is to substitute long-ter...

  1. SIMULATING ATMOSPHERIC EXPOSURE USING AN INNOVATIVE METEOROLOGICAL SAMPLING SCHEME

    EPA Science Inventory

    Multimedia risk assessments require the temporal integration of atmospheric concentration and deposition with other media modules. However, providing an extended time series of estimates is computationally expensive. An alternative approach is to substitute long-term average at...

  2. Shoulder separation - aftercare

    MedlinePlus

    Separated shoulder - aftercare; Acromioclavicular joint separation - aftercare; A/C separation - aftercare ... Most shoulder separation injuries are caused by falling onto the shoulder. This causes a tear in the tissue that connects the ...

  3. Three-dimensional marginal separation

    NASA Technical Reports Server (NTRS)

    Duck, Peter W.

    1988-01-01

    The three dimensional marginal separation of a boundary layer along a line of symmetry is considered. The key equation governing the displacement function is derived, and found to be a nonlinear integral equation in two space variables. This is solved iteratively using a pseudo-spectral approach, based partly in double Fourier space, and partly in physical space. Qualitatively, the results are similar to previously reported two dimensional results (which are also computed to test the accuracy of the numerical scheme); however quantitatively the three dimensional results are much different.

  4. A new flux splitting scheme for Euler equations of gas dynamics

    SciTech Connect

    Li, Xindong; Hu, Zongmin; Jiang, Zonglin

    2015-03-10

    A new flux splitting method named K-CUSP scheme is proposed in the paper. The major difference between K-CUSP and two traditional CUSP schemes (H-CUSP and E-CUSP) is that all kinematic quantities and all thermodynamic quantities in total enthalpy will be separately split into convective term and pressure term. The present scheme adopts the cell-face Mach number splitting method of AUSM+ scheme and the interface flux of pressure term is given a new way in the subsonic regime. Numerical solutions demonstrate that the new scheme inherits the simplicity and robustness of FVS schemes, which overcomes the shortcomings of pressure overshoot of shock wave in H-CUSP and E-CUSP schemes, but also retains the high-resolution of FDS schemes, which achieves the high accuracy of contact discontinuity and shock discontinuity.

  5. Chaotic communication scheme with multiplication

    NASA Astrophysics Data System (ADS)

    Bobreshov, A. M.; Karavaev, A. A.

    2007-05-01

    A new scheme of data transmission with nonlinear admixing is described, in which the two mutually inverse operations (multiplication and division) ensure multiplicative mixing of the informative and chaotic signals that provides a potentially higher degree of security. A special feature of the proposed scheme is the absence of limitations (related to the division by zero) imposed on the types of informative signals.

  6. Experiments with a Class of Nonlinear Anti-Diffusion Schemes

    NASA Astrophysics Data System (ADS)

    Moini-Yekta, Shayan

    The use of artificial viscosity in the simulation of viscous flows with separation, as well as inviscid flows with shocks is demonstrated first, based on standard central difference schemes. The effects of a class of nonlinear anti-diffusion schemes are studied. Furthermore, the anti-diffusion scheme is used to simulate turbulent flows over a flat plate and an ellipse, based on a primitive variable formulation in curvilinear coordinates and the artificial compressibility method. Both Baldwin-Lomax and Spalart-Allamaras models are implemented and the results are compared to those of the NASA CFL3D code. The results based on the anti-diffusion scheme are encouraging as third order upwinding results are recovered with first order upwinding with anti-diffusion.

  7. A Novel, Simplified Scheme for Plastics Identification: "JCE" Classroom Activity 104

    ERIC Educational Resources Information Center

    Harris, Mary E.; Walker, Barbara

    2010-01-01

    In this Activity, students identify samples of seven types of recyclable plastic by using a flowchart scheme. The flowchart procedure includes making density comparisons of the plastic samples in water and alcohol and observing physical changes of plastic samples subjected to boiling water temperatures and exposure to acetone. This scheme is…

  8. A new flux splitting scheme

    NASA Technical Reports Server (NTRS)

    Liou, Meng-Sing; Steffen, Christopher J., Jr.

    1991-01-01

    A new flux splitting scheme is proposed. The scheme is remarkably simple and yet its accuracy rivals and in some cases surpasses that of Roe's solver in the Euler and Navier-Stokes solutions performed in this study. The scheme is robust and converges as fast as the Roe splitting. An approximately defined cell-face advection Mach number is proposed using values from the two straddling cells via associated characteristic speeds. This interface Mach number is then used to determine the upwind extrapolation for the convective quantities. Accordingly, the name of the scheme is coined as Advection Upstream Splitting Method (AUSM). A new pressure splitting is introduced which is shown to behave successfully, yielding much smoother results than other existing pressure splittings. Of particular interest is the supersonic blunt body problem in which the Roe scheme gives anomalous solutions. The AUSM produces correct solutions without difficulty for a wide range of flow conditions as well as grids.

  9. Exposure Nomographs

    NASA Astrophysics Data System (ADS)

    Zissell, Ronald E.

    Correct exposure times may be determined from nomographs relating signal-to-noise ratio, exposure time, color, seeing, and magnitude. The equations needed to construct the nomographs are developed. Calibration techniques are discussed.

  10. Ferrofluid separator for nonferrous scrap separation

    NASA Technical Reports Server (NTRS)

    Kaiser, R.; Mir, L.

    1974-01-01

    Behavior of nonmagnetic objects within separator is essentially function of density, and independent of size or shape of objects. Results show close agreement between density of object and apparent density of ferrofluid required to float it. Results also demonstrate that very high separation rates are achievable by ferrofluid sink-float separation.

  11. An efficient and provable secure revocable identity-based encryption scheme.

    PubMed

    Wang, Changji; Li, Yuan; Xia, Xiaonan; Zheng, Kangjia

    2014-01-01

    Revocation functionality is necessary and crucial to identity-based cryptosystems. Revocable identity-based encryption (RIBE) has attracted a lot of attention in recent years, many RIBE schemes have been proposed in the literature but shown to be either insecure or inefficient. In this paper, we propose a new scalable RIBE scheme with decryption key exposure resilience by combining Lewko and Waters' identity-based encryption scheme and complete subtree method, and prove our RIBE scheme to be semantically secure using dual system encryption methodology. Compared to existing scalable and semantically secure RIBE schemes, our proposed RIBE scheme is more efficient in term of ciphertext size, public parameters size and decryption cost at price of a little looser security reduction. To the best of our knowledge, this is the first construction of scalable and semantically secure RIBE scheme with constant size public system parameters.

  12. An Efficient and Provable Secure Revocable Identity-Based Encryption Scheme

    PubMed Central

    Wang, Changji; Li, Yuan; Xia, Xiaonan; Zheng, Kangjia

    2014-01-01

    Revocation functionality is necessary and crucial to identity-based cryptosystems. Revocable identity-based encryption (RIBE) has attracted a lot of attention in recent years, many RIBE schemes have been proposed in the literature but shown to be either insecure or inefficient. In this paper, we propose a new scalable RIBE scheme with decryption key exposure resilience by combining Lewko and Waters’ identity-based encryption scheme and complete subtree method, and prove our RIBE scheme to be semantically secure using dual system encryption methodology. Compared to existing scalable and semantically secure RIBE schemes, our proposed RIBE scheme is more efficient in term of ciphertext size, public parameters size and decryption cost at price of a little looser security reduction. To the best of our knowledge, this is the first construction of scalable and semantically secure RIBE scheme with constant size public system parameters. PMID:25238418

  13. All optical labeling scheme with vestigial sideband payload.

    PubMed

    Chen, Hongwei; Chen, Minghua; Dai, Yitang; Xie, Shizhong; Zhou, Bingkun

    2005-04-04

    A novel scheme based on 40Gb/s vestigial sideband modulation for optical payload and label multiplex and separation in all optical label switching (AOLS) networks is firstly proposed and experimentally demonstrated. The payload is combined and separated with wavelength labels by optical filters. The experiment results show that after label separation, the power penalties of payload and label are both very little. The influence of the wavelength difference between label and payload is also discussed. The power penalty of payload can be less than 1dB as long as the wavelength difference is larger than 0.1nm. This scheme highly reduces the channel bandwidth of payload and label and is proposing to be used in future optical Internet.

  14. A new semiclassical decoupling scheme for electronic transitions in molecular collisions - Application to vibrational-to-electronic energy transfer

    NASA Technical Reports Server (NTRS)

    Lee, H.-W.; Lam, K. S.; Devries, P. L.; George, T. F.

    1980-01-01

    A new semiclassical decoupling scheme (the trajectory-based decoupling scheme) is introduced in a computational study of vibrational-to-electronic energy transfer for a simple model system that simulates collinear atom-diatom collisions. The probability of energy transfer (P) is calculated quasiclassically using the new scheme as well as quantum mechanically as a function of the atomic electronic-energy separation (lambda), with overall good agreement between the two sets of results. Classical mechanics with the new decoupling scheme is found to be capable of predicting resonance behavior whereas an earlier decoupling scheme (the coordinate-based decoupling scheme) failed. Interference effects are not exhibited in P vs lambda results.

  15. Measuring combined exposure to environmental pressures in urban areas: an air quality and noise pollution assessment approach.

    PubMed

    Vlachokostas, Ch; Achillas, Ch; Michailidou, A V; Moussiopoulos, Nu

    2012-02-01

    This study presents a methodological scheme developed to provide a combined air and noise pollution exposure assessment based on measurements from personal portable monitors. Provided that air and noise pollution are considered in a co-exposure approach, they represent a significant environmental hazard to public health. The methodology is demonstrated for the city of Thessaloniki, Greece. The results of an extensive field campaign are presented and the variations in personal exposure between modes of transport, routes, streets and transport microenvironments are evaluated. Air pollution and noise measurements were performed simultaneously along several commuting routes, during the morning and evening rush hours. Combined exposure to environmental pollutants is highlighted based on the Combined Exposure Factor (CEF) and Combined Dose and Exposure Factor (CDEF). The CDEF takes into account the potential relative uptake of each pollutant by considering the physical activities of each citizen. Rather than viewing environmental pollutants separately for planning and environmental sustainability considerations, the possibility of an easy-to-comprehend co-exposure approach based on these two indices is demonstrated. Furthermore, they provide for the first time a combined exposure assessment to these environmental pollutants for Thessaloniki and in this sense they could be of importance for local public authorities and decision makers. A considerable environmental burden for the citizens of Thessaloniki, especially for VOCs and noise pollution levels is observed. The material herein points out the importance of measuring public health stressors and the necessity of considering urban environmental pollution in a holistic way.

  16. Separable approximations of two-body interactions

    NASA Astrophysics Data System (ADS)

    Haidenbauer, J.; Plessas, W.

    1983-01-01

    We perform a critical discussion of the efficiency of the Ernst-Shakin-Thaler method for a separable approximation of arbitrary two-body interactions by a careful examination of separable 3S1-3D1 N-N potentials that were constructed via this method by Pieper. Not only the on-shell properties of these potentials are considered, but also a comparison is made of their off-shell characteristics relative to the Reid soft-core potential. We point out a peculiarity in Pieper's application of the Ernst-Shakin-Thaler method, which leads to a resonant-like behavior of his potential 3SD1D. It is indicated where care has to be taken in order to circumvent drawbacks inherent in the Ernst-Shakin-Thaler separable approximation scheme. NUCLEAR REACTIONS Critical discussion of the Ernst-Shakin-Thaler separable approximation method. Pieper's separable N-N potentials examined on shell and off shell.

  17. Relaxation schemes for Chebyshev spectral multigrid methods

    NASA Technical Reports Server (NTRS)

    Kang, Yimin; Fulton, Scott R.

    1993-01-01

    Two relaxation schemes for Chebyshev spectral multigrid methods are presented for elliptic equations with Dirichlet boundary conditions. The first scheme is a pointwise-preconditioned Richardson relaxation scheme and the second is a line relaxation scheme. The line relaxation scheme provides an efficient and relatively simple approach for solving two-dimensional spectral equations. Numerical examples and comparisons with other methods are given.

  18. Separation Anxiety (For Parents)

    MedlinePlus

    ... Old Feeding Your 1- to 2-Year-Old Separation Anxiety KidsHealth > For Parents > Separation Anxiety Print A ... help both of you get through it. About Separation Anxiety Babies adapt pretty well to other caregivers. ...

  19. Spacecraft -- Capsule Separation (Animation)

    NASA Technical Reports Server (NTRS)

    2005-01-01

    [figure removed for brevity, see original site] Click on the image for Spacecraft -- Capsule Separation animation

    This animation shows the return capsule separating from the Stardust spacecraft.

  20. A rotationally biased upwind difference scheme for the Euler equations

    NASA Technical Reports Server (NTRS)

    Davis, S. F.

    1983-01-01

    The upwind difference schemes of Godunov, Osher, Roe and van Leer are able to resolve one dimensional steady shocks for the Euler equations within one or two mesh intervals. Unfortunately, this resolution is lost in two dimensions when the shock crosses the computing grid at an oblique angle. To correct this problem, a numerical scheme was developed which automatically locates the angle at which a shock might be expected to cross the computing grid and then constructs separate finite difference formulas for the flux components normal and tangential to this direction. Numerical results which illustrate the ability of this method to resolve steady oblique shocks are presented.

  1. Military Exposures

    MedlinePlus

    ... Chemicals (Agent Orange, contaminated water…) Radiation (nuclear weapons, X-rays…) Air Pollutants (burn pit smoke, dust…) Occupational Hazards (asbestos, lead…) Warfare Agents (chemical and biological weapons) Exposure ...

  2. Hydrocyclone separation system

    SciTech Connect

    Worrell, J.R.; Wakley, W.D.; Young, G.A.

    1990-05-22

    This patent describes a hydrocyclone separation system for separating a fluid mixture into at least two components having differing densities. It comprises: a first hydrocyclone separator and a second hydrocyclone separator contained within an elongated protective conduit and each being substantially parallel to a longitudinal axis of the conduit, each hydrocyclone separator having a tangential fluid inlet, an overflow fluid outlet and an underflow fluid outlet; and the first hydrocyclone separator and the second hydrocyclone separator being oppositely disposed with respect to each other with the underflow fluid outlet of the first hydrocyclone separator being spaced immediately adjacent to the tangential fluid inlet of the second hydrocyclone separator and the overflow fluid outlet of the first hydrocyclone separator being spaced immediately adjacent the underflow fluid outlet of the second hydrocyclone separator.

  3. Simulation model based approach for long exposure atmospheric point spread function reconstruction for laser guide star multiconjugate adaptive optics.

    PubMed

    Gilles, Luc; Correia, Carlos; Véran, Jean-Pierre; Wang, Lianqi; Ellerbroek, Brent

    2012-11-01

    This paper discusses an innovative simulation model based approach for long exposure atmospheric point spread function (PSF) reconstruction in the context of laser guide star (LGS) multiconjugate adaptive optics (MCAO). The approach is inspired from the classical scheme developed by Véran et al. [J. Opt. Soc. Am. A14, 3057 (1997)] and Flicker et al. [Astron. Astrophys.400, 1199 (2003)] and reconstructs the long exposure optical transfer function (OTF), i.e., the Fourier transformed PSF, as a product of separate long-exposure tip/tilt removed and tip/tilt OTFs, each estimated by postprocessing system and simulation telemetry data. Sample enclosed energy results assessing reconstruction accuracy are presented for the Thirty Meter Telescope LGS MCAO system currently under design and show that percent level absolute and differential photometry over a 30 arcsec diameter field of view are achievable provided the simulation model faithfully represents the real system.

  4. High resolution schemes for hyperbolic conservation laws

    NASA Technical Reports Server (NTRS)

    Harten, A.

    1983-01-01

    A class of new explicit second order accurate finite difference schemes for the computation of weak solutions of hyperbolic conservation laws is presented. These highly nonlinear schemes are obtained by applying a nonoscillatory first order accurate scheme to an appropriately modified flux function. The so-derived second order accurate schemes achieve high resolution while preserving the robustness of the original nonoscillatory first order accurate scheme. Numerical experiments are presented to demonstrate the performance of these new schemes.

  5. EXPOSURE ANALYSIS

    EPA Science Inventory

    This proceedings chapter presents the state of the science regarding the evaluation of exposure as it relates to WQC, SQGs, and wildlife criteria (WC). . . . In summary, the exposure workgroup concluded the following: There should be greater use of mechanistic models to predict b...

  6. Nonlinear Secret Image Sharing Scheme

    PubMed Central

    Shin, Sang-Ho; Yoo, Kee-Young

    2014-01-01

    Over the past decade, most of secret image sharing schemes have been proposed by using Shamir's technique. It is based on a linear combination polynomial arithmetic. Although Shamir's technique based secret image sharing schemes are efficient and scalable for various environments, there exists a security threat such as Tompa-Woll attack. Renvall and Ding proposed a new secret sharing technique based on nonlinear combination polynomial arithmetic in order to solve this threat. It is hard to apply to the secret image sharing. In this paper, we propose a (t, n)-threshold nonlinear secret image sharing scheme with steganography concept. In order to achieve a suitable and secure secret image sharing scheme, we adapt a modified LSB embedding technique with XOR Boolean algebra operation, define a new variable m, and change a range of prime p in sharing procedure. In order to evaluate efficiency and security of proposed scheme, we use the embedding capacity and PSNR. As a result of it, average value of PSNR and embedding capacity are 44.78 (dB) and 1.74t⌈log2⁡m⌉ bit-per-pixel (bpp), respectively. PMID:25140334

  7. Nonlinear secret image sharing scheme.

    PubMed

    Shin, Sang-Ho; Lee, Gil-Je; Yoo, Kee-Young

    2014-01-01

    Over the past decade, most of secret image sharing schemes have been proposed by using Shamir's technique. It is based on a linear combination polynomial arithmetic. Although Shamir's technique based secret image sharing schemes are efficient and scalable for various environments, there exists a security threat such as Tompa-Woll attack. Renvall and Ding proposed a new secret sharing technique based on nonlinear combination polynomial arithmetic in order to solve this threat. It is hard to apply to the secret image sharing. In this paper, we propose a (t, n)-threshold nonlinear secret image sharing scheme with steganography concept. In order to achieve a suitable and secure secret image sharing scheme, we adapt a modified LSB embedding technique with XOR Boolean algebra operation, define a new variable m, and change a range of prime p in sharing procedure. In order to evaluate efficiency and security of proposed scheme, we use the embedding capacity and PSNR. As a result of it, average value of PSNR and embedding capacity are 44.78 (dB) and 1.74t⌈log2 m⌉ bit-per-pixel (bpp), respectively.

  8. Probabilistic exposure fusion.

    PubMed

    Song, Mingli; Tao, Dacheng; Chen, Chun; Bu, Jiajun; Luo, Jiebo; Zhang, Chengqi

    2012-01-01

    The luminance of a natural scene is often of high dynamic range (HDR). In this paper, we propose a new scheme to handle HDR scenes by integrating locally adaptive scene detail capture and suppressing gradient reversals introduced by the local adaptation. The proposed scheme is novel for capturing an HDR scene by using a standard dynamic range (SDR) device and synthesizing an image suitable for SDR displays. In particular, we use an SDR capture device to record scene details (i.e., the visible contrasts and the scene gradients) in a series of SDR images with different exposure levels. Each SDR image responds to a fraction of the HDR and partially records scene details. With the captured SDR image series, we first calculate the image luminance levels, which maximize the visible contrasts, and then the scene gradients embedded in these images. Next, we synthesize an SDR image by using a probabilistic model that preserves the calculated image luminance levels and suppresses reversals in the image luminance gradients. The synthesized SDR image contains much more scene details than any of the captured SDR image. Moreover, the proposed scheme also functions as the tone mapping of an HDR image to the SDR image, and it is superior to both global and local tone mapping operators. This is because global operators fail to preserve visual details when the contrast ratio of a scene is large, whereas local operators often produce halos in the synthesized SDR image. The proposed scheme does not require any human interaction or parameter tuning for different scenes. Subjective evaluations have shown that it is preferred over a number of existing approaches.

  9. One-qubit fingerprinting schemes

    SciTech Connect

    Beaudrap, J. Niel de

    2004-02-01

    Fingerprinting is a technique in communication complexity in which two parties (Alice and Bob) with large data sets send short messages to a third party (a referee), who attempts to compute some function of the larger data sets. For the equality function, the referee attempts to determine whether Alice's data and Bob's data are the same. In this paper, we consider the extreme scenario of performing fingerprinting where Alice and Bob both send either one bit (classically) or one qubit (in the quantum regime) messages to the referee for the equality problem. Restrictive bounds are demonstrated for the error probability of one-bit fingerprinting schemes, and show that it is easy to construct one-qubit fingerprinting schemes which can outperform any one-bit fingerprinting scheme. The author hopes that this analysis will provide results useful for performing physical experiments, which may help to advance implementations for more general quantum communication protocols.

  10. Analysis of airfoil transitional separation bubbles

    NASA Technical Reports Server (NTRS)

    Davis, R. L.; Carter, J. E.

    1984-01-01

    A previously developed local inviscid-viscous interaction technique for the analysis of airfoil transitional separation bubbles, ALESEP (Airfoil Leading Edge Separation) has been modified to utilize a more accurate windward finite difference procedure in the reversed flow region, and a natural transition/turbulence model has been incorporated for the prediction of transition within the separation bubble. Numerous calculations and experimental comparisons are presented to demonstrate the effects of the windward differencing scheme and the natural transition/turbulence model. Grid sensitivity and convergence capabilities of this inviscid-viscous interaction technique are briefly addressed. A major contribution of this report is that with the use of windward differencing, a second, counter-rotating eddy has been found to exist in the wall layer of the primary separation bubble.

  11. Evolution of the Z-scheme of photosynthesis: a perspective.

    PubMed

    Govindjee; Shevela, Dmitriy; Björn, Lars Olof

    2017-02-03

    The concept of the Z-scheme of oxygenic photosynthesis is in all the textbooks. However, its evolution is not. We focus here mainly on some of the history of its biophysical aspects. We have arbitrarily divided here the 1941-2016 period into three sub-periods: (a) Origin of the concept of two light reactions: first hinted at, in 1941, by James Franck and Karl Herzfeld; described and explained, in 1945, by Eugene Rabinowitch; and a clear hypothesis, given in 1956 by Rabinowitch, of the then available cytochrome experiments: one light oxidizing it and another reducing it; (b) Experimental discovery of the two light reactions and two pigment systems and the Z-scheme of photosynthesis: Robert Emerson's discovery, in 1957, of enhancement in photosynthesis when two light beams (one in the far-red region, and the other of shorter wavelengths) are given together than when given separately; and the 1960 scheme of Robin Hill & Fay Bendall; and

  12. Suboptimal greedy power allocation schemes for discrete bit loading.

    PubMed

    Al-Hanafy, Waleed; Weiss, Stephan

    2013-01-01

    We consider low cost discrete bit loading based on greedy power allocation (GPA) under the constraints of total transmit power budget, target BER, and maximum permissible QAM modulation order. Compared to the standard GPA, which is optimal in terms of maximising the data throughput, three suboptimal schemes are proposed, which perform GPA on subsets of subchannels only. These subsets are created by considering the minimum SNR boundaries of QAM levels for a given target BER. We demonstrate how these schemes can significantly reduce the computational complexity required for power allocation, particularly in the case of a large number of subchannels. Two of the proposed algorithms can achieve near optimal performance including a transfer of residual power between subsets at the expense of a very small extra cost. By simulations, we show that the two near optimal schemes, while greatly reducing complexity, perform best in two separate and distinct SNR regions.

  13. Suboptimal Greedy Power Allocation Schemes for Discrete Bit Loading

    PubMed Central

    2013-01-01

    We consider low cost discrete bit loading based on greedy power allocation (GPA) under the constraints of total transmit power budget, target BER, and maximum permissible QAM modulation order. Compared to the standard GPA, which is optimal in terms of maximising the data throughput, three suboptimal schemes are proposed, which perform GPA on subsets of subchannels only. These subsets are created by considering the minimum SNR boundaries of QAM levels for a given target BER. We demonstrate how these schemes can significantly reduce the computational complexity required for power allocation, particularly in the case of a large number of subchannels. Two of the proposed algorithms can achieve near optimal performance including a transfer of residual power between subsets at the expense of a very small extra cost. By simulations, we show that the two near optimal schemes, while greatly reducing complexity, perform best in two separate and distinct SNR regions. PMID:24501578

  14. An ICA based MIMO-OFDM VLC scheme

    NASA Astrophysics Data System (ADS)

    Jiang, Fangqing; Deng, Honggui; Xiao, Wei; Tao, Shaohua; Zhu, Kaicheng

    2015-07-01

    In this paper, we propose a novel ICA based MIMO-OFDM VLC scheme, where ICA is applied to convert the MIMO-OFDM channel into several SISO-OFDM channels to reduce computational complexity in channel estimation, without any spectral overhead. Besides, the FM is first investigated to further modulate the OFDM symbols to eliminate the correlation of the signals, so as to improve the separation performance of the ICA algorithm. In the 4×4MIMO-OFDM VLC simulation experiment, LOS path and NLOS paths are both considered, each transmitting signal at 100 Mb/s. Simulation results show that the BER of the proposed scheme reaches the 10-5 level at SNR=20 dB, which is a large improvement compared to the traditional schemes.

  15. Extension of 193 nm dry lithography to 45-nm half-pitch node: double exposure and double processing technique

    NASA Astrophysics Data System (ADS)

    Biswas, Abani M.; Li, Jianliang; Hiserote, Jay A.; Melvin, Lawrence S., III

    2006-10-01

    Immersion lithography and multiple exposure techniques are the most promising methods to extend lithography manufacturing to the 45nm node. Although immersion lithography has attracted much attention recently as a promising optical lithography extension, it will not solve all the problems at the 45-nm node. The 'dry' option, (i.e. double exposure/etch) which can be realized with standard processing practice, will extend 193-nm lithography to the end of the current industry roadmap. Double exposure/etch lithography is expensive in terms of cost, throughput time, and overlay registration accuracy. However, it is less challenging compared to other possible alternatives and has the ability to break through the κ I barrier (0.25). This process, in combination with attenuated PSM (att-PSM) mask, is a good imaging solution that can reach, and most likely go beyond, the 45-nm node. Mask making requirements in a double exposure scheme will be reduced significantly. This can be appreciated by the fact that the separation of tightly-pitched mask into two less demanding pitch patterns will reduce the stringent specifications for each mask. In this study, modeling of double exposure lithography (DEL) with att-PSM masks to target 45-nm node is described. In addition, mask separation and implementation issues of optical proximity corrections (OPC) to improve process window are studied. To understand the impact of OPC on the process window, Fourier analysis of the masks has been carried out as well.

  16. On symmetric and upwind TVD schemes

    NASA Technical Reports Server (NTRS)

    Yee, H. C.

    1985-01-01

    A class of explicit and implicit total variation diminishing (TVD) schemes for the compressible Euler and Navier-Stokes equations was developed. They do not generate spurious oscillations across shocks and contact discontinuities. In general, shocks can be captured within 1 to 2 grid points. For the inviscid case, these schemes are divided into upwind TVD schemes and symmetric (nonupwind) TVD schemes. The upwind TVD scheme is based on the second-order TVD scheme. The symmetric TVD scheme is a generalization of Roe's and Davis' TVD Lax-Wendroff scheme. The performance of these schemes on some viscous and inviscid airfoil steady-state calculations is investigated. The symmetric and upwind TVD schemes are compared.

  17. Upwind Compact Finite Difference Schemes

    NASA Astrophysics Data System (ADS)

    Christie, I.

    1985-07-01

    It was shown by Ciment, Leventhal, and Weinberg ( J. Comput. Phys.28 (1978), 135) that the standard compact finite difference scheme may break down in convection dominated problems. An upwinding of the method, which maintains the fourth order accuracy, is suggested and favorable numerical results are found for a number of test problems.

  18. A physical classification scheme for blazars

    NASA Astrophysics Data System (ADS)

    Landt, Hermine; Padovani, Paolo; Perlman, Eric S.; Giommi, Paolo

    2004-06-01

    Blazars are currently separated into BL Lacertae objects (BL Lacs) and flat spectrum radio quasars based on the strength of their emission lines. This is performed rather arbitrarily by defining a diagonal line in the Ca H&K break value-equivalent width plane, following Marchã et al. We readdress this problem and put the classification scheme for blazars on firm physical grounds. We study ~100 blazars and radio galaxies from the Deep X-ray Radio Blazar Survey (DXRBS) and 2-Jy radio survey and find a significant bimodality for the narrow emission line [OIII]λ5007. This suggests the presence of two physically distinct classes of radio-loud active galactic nuclei (AGN). We show that all radio-loud AGN, blazars and radio galaxies, can be effectively separated into weak- and strong-lined sources using the [OIII]λ5007-[OII]λ3727 equivalent width plane. This plane allows one to disentangle orientation effects from intrinsic variations in radio-loud AGN. Based on DXRBS, the strongly beamed sources of the new class of weak-lined radio-loud AGN are made up of BL Lacs at the ~75 per cent level, whereas those of the strong-lined radio-loud AGN include mostly (~97 per cent) quasars.

  19. Efficient lossless compression scheme for multispectral images

    NASA Astrophysics Data System (ADS)

    Benazza-Benyahia, Amel; Hamdi, Mohamed; Pesquet, Jean-Christophe

    2001-12-01

    Huge amounts of data are generated thanks to the continuous improvement of remote sensing systems. Archiving this tremendous volume of data is a real challenge which requires lossless compression techniques. Furthermore, progressive coding constitutes a desirable feature for telebrowsing. To this purpose, a compact and pyramidal representation of the input image has to be generated. Separable multiresolution decompositions have already been proposed for multicomponent images allowing each band to be decomposed separately. It seems however more appropriate to exploit also the spectral correlations. For hyperspectral images, the solution is to apply a 3D decomposition according to the spatial and to the spectral dimensions. This approach is not appropriate for multispectral images because of the reduced number of spectral bands. In recent works, we have proposed a nonlinear subband decomposition scheme with perfect reconstruction which exploits efficiently both the spatial and the spectral redundancies contained in multispectral images. In this paper, the problem of coding the coefficients of the resulting subband decomposition is addressed. More precisely, we propose an extension to the vector case of Shapiro's embedded zerotrees of wavelet coefficients (V-EZW) with achieves further saving in the bit stream. Simulations carried out on SPOT images indicate the outperformance of the global compression package we performed.

  20. Fabrication and efficient visible light photocatalytic properties of novel zinc indium sulfide (ZnIn2S4) - graphitic carbon nitride (g-C3N4)/bismuth vanadate (BiVO4) nanorod-based ternary nanocomposites with enhanced charge separation via Z-scheme transfer.

    PubMed

    Jo, Wan-Kuen; Natarajan, Thillai Sivakumar

    2016-11-15

    Novel ZnIn2S4-g-C3N4/BiVO4 nanorod-based ternary nanocomposite photocatalysts with enhanced visible light absorption were synthesized and systematically characterized to confirm the formation of ZnIn2S4 marigold flowers, the layered structure of the g-C3N4, BiVO4 nanorods, and the formation of binary and ternary nanocomposites. The visible light absorption of BiVO4 was significantly improved after coupling with g-C3N4 and ZnIn2S4, which was confirmed by UV-visible diffuse reflectance spectroscopic analysis. Ternary ZnIn2S4-g-C3N4/BiVO4 nanocomposites exhibited excellent visible light photocatalytic decomposition efficiency (VL-PDE) when used for the degradation of congo red (CR) dye and metronidazole (MTZ) pharmaceutical, as well as excellent stability and reusability. The ternary 5%ZnIn2S4-50%-g-C3N4/BiVO4 nanocomposite showed higher VL-PDE for CR (81.5%) and MTZ (59%) degradation than the binary composites, g-C3N4 and BiVO4. Radical quenching experiments showed that h(+), OH, and O2(-) were the reactive radicals, validating that the Z-scheme charge carrier transfer mechanism was responsible for the enhanced VL-PDE of the ternary ZnIn2S4-g-C3N4/BiVO4 nanocomposites, which was further confirmed by photoluminescence analysis. Furthermore, kinetic studies showed that the degradation followed pseudo-first-order kinetics, and that the ternary photocatalysts could be reused up to three times with good stability. The enhanced visible light absorption, high surface area, high adsorption capacity, Z-scheme charge carrier transfer, and increased lifetime of photo-produced electron-hole pairs were responsible for the increased visible light photocatalytic decomposition efficiency.

  1. A New Improving Quantum Secret Sharing Scheme

    NASA Astrophysics Data System (ADS)

    Xu, Ting-Ting; Li, Zhi-Hui; Bai, Chen-Ming; Ma, Min

    2017-01-01

    An improving quantum secret sharing scheme (IQSS scheme) was introduced by Nascimento et al. (Phys. Rev. A 64, 042311 (2001)), which was analyzed by the improved quantum access structure. In this paper, we propose a new improving quantum secret sharing scheme, and more quantum access structures can be realized by this scheme than the previous one. For example, we prove that any threshold and hypercycle quantum access structures can be realized by the new scheme.

  2. A New Improving Quantum Secret Sharing Scheme

    NASA Astrophysics Data System (ADS)

    Xu, Ting-Ting; Li, Zhi-Hui; Bai, Chen-Ming; Ma, Min

    2017-04-01

    An improving quantum secret sharing scheme (IQSS scheme) was introduced by Nascimento et al. (Phys. Rev. A 64, 042311 (2001)), which was analyzed by the improved quantum access structure. In this paper, we propose a new improving quantum secret sharing scheme, and more quantum access structures can be realized by this scheme than the previous one. For example, we prove that any threshold and hypercycle quantum access structures can be realized by the new scheme.

  3. Magnetic separation of algae

    SciTech Connect

    Nath, Pulak; Twary, Scott N.

    2016-04-26

    Described herein are methods and systems for harvesting, collecting, separating and/or dewatering algae using iron based salts combined with a magnetic field gradient to separate algae from an aqueous solution.

  4. Separation anxiety in children

    MedlinePlus

    ... this page: //medlineplus.gov/ency/article/001542.htm Separation anxiety in children To use the sharing features on this page, please enable JavaScript. Separation anxiety in children is a developmental stage in ...

  5. Ionene membrane battery separator

    NASA Technical Reports Server (NTRS)

    Moacanin, J.; Tom, H. Y.

    1969-01-01

    Ionic transport characteristics of ionenes, insoluble membranes from soluble polyelectrolyte compositions, are studied for possible application in a battery separator. Effectiveness of the thin film of separator membrane essentially determines battery lifetime.

  6. Robust creation of entanglement between ions in spatially separate cavities.

    PubMed

    Browne, Daniel E; Plenio, Martin B; Huelga, Susana F

    2003-08-08

    We present a protocol that allows the generation of a maximally entangled state between individual atoms held in spatially separate cavities. Assuming perfect detectors and neglecting spontaneous emission from the atoms, the resulting idealized scheme is deterministic. Under more realistic conditions, when the atom-cavity interaction departs from the strong coupling regime, and considering imperfect detectors, we show that the scheme is robust against experimental inefficiencies and yields probabilistic entanglement of very high fidelity.

  7. An Advanced Leakage Scheme for Neutrino Treatment in Astrophysical Simulations

    NASA Astrophysics Data System (ADS)

    Perego, A.; Cabezón, R. M.; Käppeli, R.

    2016-04-01

    We present an Advanced Spectral Leakage (ASL) scheme to model neutrinos in the context of core-collapse supernovae (CCSNe) and compact binary mergers. Based on previous gray leakage schemes, the ASL scheme computes the neutrino cooling rates by interpolating local production and diffusion rates (relevant in optically thin and thick regimes, respectively) separately for discretized values of the neutrino energy. Neutrino trapped components are also modeled, based on equilibrium and timescale arguments. The better accuracy achieved by the spectral treatment allows a more reliable computation of neutrino heating rates in optically thin conditions. The scheme has been calibrated and tested against Boltzmann transport in the context of Newtonian spherically symmetric models of CCSNe. ASL shows a very good qualitative and a partial quantitative agreement for key quantities from collapse to a few hundreds of milliseconds after core bounce. We have proved the adaptability and flexibility of our ASL scheme, coupling it to an axisymmetric Eulerian and to a three-dimensional smoothed particle hydrodynamics code to simulate core collapse. Therefore, the neutrino treatment presented here is ideal for large parameter-space explorations, parametric studies, high-resolution tests, code developments, and long-term modeling of asymmetric configurations, where more detailed neutrino treatments are not available or are currently computationally too expensive.

  8. AN ADVANCED LEAKAGE SCHEME FOR NEUTRINO TREATMENT IN ASTROPHYSICAL SIMULATIONS

    SciTech Connect

    Perego, A.; Cabezón, R. M.; Käppeli, R.

    2016-04-15

    We present an Advanced Spectral Leakage (ASL) scheme to model neutrinos in the context of core-collapse supernovae (CCSNe) and compact binary mergers. Based on previous gray leakage schemes, the ASL scheme computes the neutrino cooling rates by interpolating local production and diffusion rates (relevant in optically thin and thick regimes, respectively) separately for discretized values of the neutrino energy. Neutrino trapped components are also modeled, based on equilibrium and timescale arguments. The better accuracy achieved by the spectral treatment allows a more reliable computation of neutrino heating rates in optically thin conditions. The scheme has been calibrated and tested against Boltzmann transport in the context of Newtonian spherically symmetric models of CCSNe. ASL shows a very good qualitative and a partial quantitative agreement for key quantities from collapse to a few hundreds of milliseconds after core bounce. We have proved the adaptability and flexibility of our ASL scheme, coupling it to an axisymmetric Eulerian and to a three-dimensional smoothed particle hydrodynamics code to simulate core collapse. Therefore, the neutrino treatment presented here is ideal for large parameter-space explorations, parametric studies, high-resolution tests, code developments, and long-term modeling of asymmetric configurations, where more detailed neutrino treatments are not available or are currently computationally too expensive.

  9. Evaluation of ozone exposure indices in exposure-response modeling.

    PubMed

    Lee, E H; Tingey, D T; Hogsett, W E

    1988-01-01

    In exposure-response modeling, a major concern is the numerical definition of exposure in relating crop loss to O3, yet few indices have been considered. This paper addresses research in which plant growth was regressed for soybean, wheat, cotton, corn, and sorghum against 613 numerical exposure indices using the Box-Tidwell model. When the minimum sum of squared errors criterion was used, optimum performance was not attained for any single index; however, near optimum performances were achieved by two censored cumulative indices and from a class of indices called the generalized, phenologically weighted, cumulative impact indices (GPWCIs). The top-performing GPWCIs accumulated concentrations, used sigmoid weighting schemes emphasizing O3 concentrations of 0.06 ppm (118 microg m(-3)) or higher, and had phenological weighting schemes with greatest weight occurring 20 to 40 days prior to crop maturity. These findings indicate that (1) peak concentrations are important, but lower concentrations should be included in the calculations, (2) increased plant sensitivity occurs between flowering and maturity, and (3) plants respond to cumulative exposure impact.

  10. Meniscus Membranes For Separation

    DOEpatents

    Dye, Robert C.; Jorgensen, Betty; Pesiri, David R.

    2005-09-20

    Gas separation membranes, especially meniscus-shaped membranes for gas separations are disclosed together with the use of such meniscus-shaped membranes for applications such as thermal gas valves, pre-concentration of a gas stream, and selective pre-screening of a gas stream. In addition, a rapid screening system for simultaneously screening polymer materials for effectiveness in gas separation is provided.

  11. Meniscus membranes for separations

    DOEpatents

    Dye, Robert C.; Jorgensen, Betty; Pesiri, David R.

    2004-01-27

    Gas separation membranes, especially meniscus-shaped membranes for gas separations are disclosed together with the use of such meniscus-shaped membranes for applications such as thermal gas valves, pre-concentration of a gas stream, and selective pre-screening of a gas stream. In addition, a rapid screening system for simultaneously screening polymer materials for effectiveness in gas separation is provided.

  12. Separation in Binary Alloys

    NASA Technical Reports Server (NTRS)

    Frazier, D. O.; Facemire, B. R.; Kaukler, W. F.; Witherow, W. K.; Fanning, U.

    1986-01-01

    Studies of monotectic alloys and alloy analogs reviewed. Report surveys research on liquid/liquid and solid/liquid separation in binary monotectic alloys. Emphasizes separation processes in low gravity, such as in outer space or in free fall in drop towers. Advances in methods of controlling separation in experiments highlighted.

  13. Methods of separation of variables in turbulence theory

    NASA Technical Reports Server (NTRS)

    Tsuge, S.

    1978-01-01

    Two schemes of closing turbulent moment equations are proposed both of which make double correlation equations separated into single-point equations. The first is based on neglected triple correlation, leading to an equation differing from small perturbed gasdynamic equations where the separation constant appears as the frequency. Grid-produced turbulence is described in this light as time-independent, cylindrically-isotropic turbulence. Application to wall turbulence guided by a new asymptotic method for the Orr-Sommerfeld equation reveals a neutrally stable mode of essentially three dimensional nature. The second closure scheme is based on an assumption of identity of the separated variables through which triple and quadruple correlations are formed. The resulting equation adds, to its equivalent of the first scheme, an integral of nonlinear convolution in the frequency describing a role due to triple correlation of direct energy-cascading.

  14. High-Order Hyperbolic Residual-Distribution Schemes on Arbitrary Triangular Grids

    NASA Technical Reports Server (NTRS)

    Mazaheri, Alireza; Nishikawa, Hiroaki

    2015-01-01

    In this paper, we construct high-order hyperbolic residual-distribution schemes for general advection-diffusion problems on arbitrary triangular grids. We demonstrate that the second-order accuracy of the hyperbolic schemes can be greatly improved by requiring the scheme to preserve exact quadratic solutions. We also show that the improved second-order scheme can be easily extended to third-order by further requiring the exactness for cubic solutions. We construct these schemes based on the LDA and the SUPG methodology formulated in the framework of the residual-distribution method. For both second- and third-order-schemes, we construct a fully implicit solver by the exact residual Jacobian of the second-order scheme, and demonstrate rapid convergence of 10-15 iterations to reduce the residuals by 10 orders of magnitude. We demonstrate also that these schemes can be constructed based on a separate treatment of the advective and diffusive terms, which paves the way for the construction of hyperbolic residual-distribution schemes for the compressible Navier-Stokes equations. Numerical results show that these schemes produce exceptionally accurate and smooth solution gradients on highly skewed and anisotropic triangular grids, including curved boundary problems, using linear elements. We also present Fourier analysis performed on the constructed linear system and show that an under-relaxation parameter is needed for stabilization of Gauss-Seidel relaxation.

  15. Algorithms to get the maximum operation frequency for skew-tolerant clocking schemes

    NASA Astrophysics Data System (ADS)

    Guerrero, D.; Bellido, M.; Juan, J.; Millan, A.; Ruiz, P.; Ostua, E.; Viejo, J.

    2005-06-01

    Nowadays it is not possible to neglect the delay of interconnection lines. The die size is rising very fast, and the delay of the interconnection lines grows quadrically with it. Also, the fact that the gate delay keeps getting smaller increases the importance of the delay of the interconnection lines. The delay of the clock lines is specially important: If the clock skew is underestimated and the clocking scheme is not properly designed, then the system may not work under any clock frequency. In this paper we evaluate the timing performance of three skew-tolerant clocking schemes. These schemes are the well known Master-Slave clocking scheme (MS) and two schemes developed by the authors: Parallel Alternating Latches Clocking Scheme (PALACS) and four-phase Parallel Alternating Latches Clocking Scheme (four-phase PALACS). To carry out these analysis, the authors introduce new algorithms to obtain the clock waveforms required by a synchronous sequential circuit. Separated algorithms were developed for every clocking scheme. The algorithms take a set of timing parameters as input and generate a chronogram of the circuit trying to minimise the clock period but ensuring the timing restrictions of the circuit are met for a given clock skew. Using these algorithms is it possible to draw a representation of the computation frequency as a function of the clock skew for every clock scheme. Once we have estimated the timing parameters and the skew, these representations can help us to choose the best clocking scheme for our design.

  16. Safety shutdown separators

    DOEpatents

    Carlson, Steven Allen; Anakor, Ifenna Kingsley; Farrell, Greg Robert

    2015-06-30

    The present invention pertains to electrochemical cells which comprise (a) an anode; (b) a cathode; (c) a solid porous separator, such as a polyolefin, xerogel, or inorganic oxide separator; and (d) a nonaqueous electrolyte, wherein the separator comprises a porous membrane having a microporous coating comprising polymer particles which have not coalesced to form a continuous film. This microporous coating on the separator acts as a safety shutdown layer that rapidly increases the internal resistivity and shuts the cell down upon heating to an elevated temperature, such as 110.degree. C. Also provided are methods for increasing the safety of an electrochemical cell by utilizing such separators with a safety shutdown layer.

  17. Acoustofluidic bacteria separation

    NASA Astrophysics Data System (ADS)

    Li, Sixing; Ma, Fen; Bachman, Hunter; Cameron, Craig E.; Zeng, Xiangqun; Huang, Tony Jun

    2017-01-01

    Bacterial separation from human blood samples can help with the identification of pathogenic bacteria for sepsis diagnosis. In this work, we report an acoustofluidic device for label-free bacterial separation from human blood samples. In particular, we exploit the acoustic radiation force generated from a tilted-angle standing surface acoustic wave (taSSAW) field to separate Escherichia coli from human blood cells based on their size difference. Flow cytometry analysis of the E. coli separated from red blood cells shows a purity of more than 96%. Moreover, the label-free electrochemical detection of the separated E. coli displays reduced non-specific signals due to the removal of blood cells. Our acoustofluidic bacterial separation platform has advantages such as label-free separation, high biocompatibility, flexibility, low cost, miniaturization, automation, and ease of in-line integration. The platform can be incorporated with an on-chip sensor to realize a point-of-care sepsis diagnostic device.

  18. Subranging scheme for SQUID sensors

    NASA Technical Reports Server (NTRS)

    Penanen, Konstantin I. (Inventor)

    2008-01-01

    A readout scheme for measuring the output from a SQUID-based sensor-array using an improved subranging architecture that includes multiple resolution channels (such as a coarse resolution channel and a fine resolution channel). The scheme employs a flux sensing circuit with a sensing coil connected in series to multiple input coils, each input coil being coupled to a corresponding SQUID detection circuit having a high-resolution SQUID device with independent linearizing feedback. A two-resolution configuration (course and fine) is illustrated with a primary SQUID detection circuit for generating a fine readout, and a secondary SQUID detection circuit for generating a course readout, both having feedback current coupled to the respective SQUID devices via feedback/modulation coils. The primary and secondary SQUID detection circuits function and derive independent feedback. Thus, the SQUID devices may be monitored independently of each other (and read simultaneously) to dramatically increase slew rates and dynamic range.

  19. [PICS: pharmaceutical inspection cooperation scheme].

    PubMed

    Morénas, J

    2009-01-01

    The pharmaceutical inspection cooperation scheme (PICS) is a structure containing 34 participating authorities located worldwide (October 2008). It has been created in 1995 on the basis of the pharmaceutical inspection convention (PIC) settled by the European free trade association (EFTA) in1970. This scheme has different goals as to be an international recognised body in the field of good manufacturing practices (GMP), for training inspectors (by the way of an annual seminar and experts circles related notably to active pharmaceutical ingredients [API], quality risk management, computerized systems, useful for the writing of inspection's aide-memoires). PICS is also leading to high standards for GMP inspectorates (through regular crossed audits) and being a room for exchanges on technical matters between inspectors but also between inspectors and pharmaceutical industry.

  20. A biometric signcryption scheme without bilinear pairing

    NASA Astrophysics Data System (ADS)

    Wang, Mingwen; Ren, Zhiyuan; Cai, Jun; Zheng, Wentao

    2013-03-01

    How to apply the entropy in biometrics into the encryption and remote authentication schemes to simplify the management of keys is a hot research area. Utilizing Dodis's fuzzy extractor method and Liu's original signcryption scheme, a biometric identity based signcryption scheme is proposed in this paper. The proposed scheme is more efficient than most of the previous proposed biometric signcryption schemes for that it does not need bilinear pairing computation and modular exponentiation computation which is time consuming largely. The analysis results show that under the CDH and DL hard problem assumption, the proposed scheme has the features of confidentiality and unforgeability simultaneously.

  1. Charge Separation for Muon Collider Cooling

    SciTech Connect

    Palmer, R.B.; Fernow; R.C.

    2011-03-28

    Most schemes for six dimensional muon ionization cooling work for only one sign. It is then necessary to have charge separation prior to that cooling. Schemes of charge separation using bent solenoids are described, and their simulated performances reported. It is found that for efficient separation, it should take place at somewhat higher momenta than commonly used for the cooling. Charge separation using bent solenoids can be effective if carefully designed. Bent solenoids can generate dispersion from 'momentum drift', but can spoil emittance from 'amplitude drift'. Abrupt entry into a bent solenoid causes emittance growth, but matching using integral {lambda} lengths, or Norem's method, corrects this problem. Reverse bending removes the dispersion and reduces 'amplitude drift', but only if there is no rf until after all bending. The main problem is bunch lengthening and distortion from the long transports without rf. At 230 MeV/c, even with a higher field of 3 T, non-linearities increase the 6D emittance by 117% and give 13% loss, which is not acceptable. Raising the momentum from 230 to 300 MeV gives a 6D emittance growth of 38% and the loss 5%, which may be acceptable. Raising the momentum further to 400 MeV/c gives very good results: 6D growth of 24% and 2.5% loss. Further optimization should include the acceleration to the higher momenta prior to the separation, and the higher momentum cooling immediately after it. The longitudinal phase space prior to the separation should be rotated to minimize the total bunch lengthening.

  2. EXPOSURE ANALYSIS

    EPA Science Inventory

    This proceedings chapter will discuss the state-of-the-science regarding the evaluation of exposure as it relates to water quality criteria (WQC), sediment quality guidelines (SQG), and wildlife criteria (WC). Throughout this discussion, attempts are made to identify the methods ...

  3. [Separation anxiety. Theoretical considerations].

    PubMed

    Blandin, N; Parquet, P J; Bailly, D

    1994-01-01

    The interest in separation anxiety is nowadays increasing: this disorder appearing during childhood may predispose to the occurrence of anxiety disorders (such as panic disorder and agoraphobia) and major depression into adulthood. Psychoanalytic theories differ on the nature of separation anxiety and its place in child development. For some authors, separation anxiety must be understood as resulting from the unconscious internal conflicts inherent in the individuation process and gradual attainment of autonomy. From this point of view, the fear of loss of mother by separation is not regarded as resulting from a real danger. However, Freud considers the primary experience of separation from protecting mother as the prototype situation of anxiety and compares the situations generating fear to separation experiences. For him, anxiety originates from two factors: the physiological fact is initiated at the time of birth but the primary traumatic situation is the separation from mother. This point of view may be compared with behavioral theories. Behavioral theories suggest that separation anxiety may be conditioned or learned from innate fears. In Freud's theory, the primary situation of anxiety resulting from the separation from mother plays a role comparable to innate fears. Grappling with the problem of separation anxiety, Bowlby emphasizes then the importance of the child's attachment to one person (mother or primary caregiver) and the fact that this attachment is instinctive. This point of view, based on the watch of infants, is akin to ethological theories on behaviour of non human primates. Bowlby especially shows that the reactions of infant separated from mother evolve on three stages: the phase of protestation which may constitute the prototype of adulthood anxiety, the phase of desperation which may be the prototype of depression, and the phase of detachment. He emphasizes so the role of early separations in the development of vulnerability to depression

  4. Isotope separation by photochromatography

    DOEpatents

    Suslick, K.S.

    1975-10-03

    A photochromatographic method for isotope separation is described. An isotopically mixed molecular species is adsorbed on an adsorptive surface, and the adsorbed molecules are irradiated with radiation of a predetermined wavelength which will selectively excite desired isotopic species. Sufficient energy is transferred to the excited molecules to desorb them from the surface and thus separate them from the undesired isotopic species. The method is particularly applicable to the separation of hydrogen isotopes. (BLM)

  5. Isotope separation by photochromatography

    DOEpatents

    Suslick, Kenneth S.

    1977-01-01

    An isotope separation method which comprises physically adsorbing an isotopically mixed molecular species on an adsorptive surface and irradiating the adsorbed molecules with radiation of a predetermined wavelength which will selectively excite a desired isotopic species. Sufficient energy is transferred to the excited molecules to desorb them from the surface and thereby separate them from the unexcited undesired isotopic species. The method is particularly applicable to the separation of hydrogen isotopes.

  6. Decoupling schemes for the SSC Collider

    SciTech Connect

    Cai, Y.; Bourianoff, G.; Cole, B.; Meinke, R.; Peterson, J.; Pilat, F.; Stampke, S.; Syphers, M.; Talman, R.

    1993-05-01

    A decoupling system is designed for the SSC Collider. This system can accommodate three decoupling schemes by using 44 skew quadrupoles in the different configurations. Several decoupling schemes are studied and compared in this paper.

  7. Membrane separation systems

    SciTech Connect

    Baker, R.W.; Cussler, E.L.; Eykamp, W.; Koros, W.J.; Riley, R.L.; Strathman, R.H.

    1991-01-01

    This book discusses developments and future directions in the field of membrane separation systems. It describes research needed to bring energy-saving membrane separation processes to technical and commercial readiness for commercial acceptance within the next 5 to 20 years. The assessment was conducted by a group of six internationally known membrane separations experts who examined the worldwide status of research in seven major membrane areas. These encompassed four mature technology areas: reverse osmosis, microfiltration, ultrafiltration, and electrodialysis; two developing areas: gas separation and pervaporation; and one emerging technology; facilitated transport.

  8. The ADvanced SEParation (ADSEP)

    NASA Technical Reports Server (NTRS)

    1998-01-01

    The ADvanced SEParation (ADSEP) commercial payload is making use of major advances in separation technology: The Phase Partitioning Experiment (PPE); the Micorencapsulation experiment; and the Hemoglobin Separation Experiment (HSE). Using ADSEP, commercial researchers will attempt to determine the partition coefficients for model particles in a two-phase system. With this information, researchers can develop a higher resolution, more effective cell isolation procedure that can be used for many different types of research and for improved health care. The advanced separation technology is already being made available for use in ground-based laboratories.

  9. Environmental endocrine disruptors: A proposed classification scheme

    SciTech Connect

    Fur, P.L. de; Roberts, J.

    1995-12-31

    A number of chemicals known to act on animal systems through the endocrine system have been termed environmental endocrine disruptors. This group includes some of the PCBs and TCDDs, as well as lead, mercury and a large number of pesticides. The common feature is that the chemicals interact with endogenous endocrine systems at the cellular and/or molecular level to alter normal processes that are controlled or regulated by hormones. Although the existence of artificial or environmental estrogens (e.g. chlordecone and DES) has been known for some time, recent data indicate that this phenomenon is widespread. Indeed, anti-androgens have been held responsible for reproductive dysfunction in alligator populations in Florida. But the significance of endocrine disruption was recognized by pesticide manufacturers when insect growth regulators were developed to interfere with hormonal control of growth. Controlling, regulating or managing these chemicals depends in no small part on the ability to identify, screen or otherwise know that a chemical is an endocrine disrupter. Two possible classifications schemes are: using the effects caused in an animal, or animals as an exposure indicator; and using a known screen for the point of contact with the animal. The former would require extensive knowledge of cause and effect relationships in dozens of animal groups; the latter would require a screening tool comparable to an estrogen binding assay. The authors present a possible classification based on chemicals known to disrupt estrogenic, androgenic and ecdysone regulated hormonal systems.

  10. Comparative study of numerical schemes of TVD3, UNO3-ACM and optimized compact scheme

    NASA Technical Reports Server (NTRS)

    Lee, Duck-Joo; Hwang, Chang-Jeon; Ko, Duck-Kon; Kim, Jae-Wook

    1995-01-01

    Three different schemes are employed to solve the benchmark problem. The first one is a conventional TVD-MUSCL (Monotone Upwind Schemes for Conservation Laws) scheme. The second scheme is a UNO3-ACM (Uniformly Non-Oscillatory Artificial Compression Method) scheme. The third scheme is an optimized compact finite difference scheme modified by us: the 4th order Runge Kutta time stepping, the 4th order pentadiagonal compact spatial discretization with the maximum resolution characteristics. The problems of category 1 are solved by using the second (UNO3-ACM) and third (Optimized Compact) schemes. The problems of category 2 are solved by using the first (TVD3) and second (UNO3-ACM) schemes. The problem of category 5 is solved by using the first (TVD3) scheme. It can be concluded from the present calculations that the Optimized Compact scheme and the UN03-ACM show good resolutions for category 1 and category 2 respectively.

  11. Current terminology and diagnostic classification schemes.

    PubMed

    Okeson, J P

    1997-01-01

    This article reviews the current terminology and classification schemes available for temporomandibular disorders. The origin of each term is presented, and the classification schemes that have been offered for temporomandibular disorders are briefly reviewed. Several important classifications are presented in more detail, with mention of advantages and disadvantages. Final recommendations are provided for future direction in the area of classification schemes.

  12. Implementation of a conservative two-step shape-preserving advection scheme on a spherical icosahedral hexagonal geodesic grid

    NASA Astrophysics Data System (ADS)

    Zhang, Yi; Yu, Rucong; Li, Jian

    2017-03-01

    An Eulerian flux-form advection scheme, called the Two-step Shape-Preserving Advection Scheme (TSPAS), was generalized and implemented on a spherical icosahedral hexagonal grid (also referred to as a geodesic grid) to solve the transport equation. The C grid discretization was used for the spatial discretization. To implement TSPAS on an unstructured grid, the original finite-difference scheme was further generalized. The two-step integration utilizes a combination of two separate schemes (a low-order monotone scheme and a high-order scheme that typically cannot ensure monotonicity) to calculate the fluxes at the cell walls (one scheme corresponds to one cell wall). The choice between these two schemes for each edge depends on a pre-updated scalar value using slightly increased fluxes. After the determination of an appropriate scheme, the final integration at a target cell is achieved by summing the fluxes that are computed by the different schemes. The conservative and shape-preserving properties of the generalized scheme are demonstrated. Numerical experiments are conducted at several horizontal resolutions. TSPAS is compared with the Flux Corrected Transport (FCT) approach to demonstrate the differences between the two methods, and several transport tests are performed to examine the accuracy, efficiency and robustness of the two schemes.

  13. Three-dimensional separated flows past ground vehicles

    NASA Technical Reports Server (NTRS)

    Chometon, F.; Fontanet, P.

    1981-01-01

    The separated flow past a thick body is calculated using a theoretical model based on a discrete wake-vortex representation. Rehbach's unsteady inviscid scheme (1977) was used in the three-dimensional analysis. The obstacle is represented by singularities, and the wake is modeled by vortex particles emitted at the separation line. Calculated results for an axisymmetric body are compared with flow visualization results.

  14. Adventures in maceral separation

    SciTech Connect

    Dyrkacz, G.R.

    1994-02-01

    Progress has been made in recent years in the science of maceral separation. However, there are many areas that can be improved and new areas investigated. Power of density gradient centrifugation to physically resolve macerals and submaceral species coupled with other instrumental techniques is attractive for defining the limits of coal heterogeneity as well as investigating the ability of other separation methods.

  15. Method for separating isotopes

    DOEpatents

    Jepson, B.E.

    1975-10-21

    Isotopes are separated by contacting a feed solution containing the isotopes with a cyclic polyether wherein a complex of one isotope is formed with the cyclic polyether, the cyclic polyether complex is extracted from the feed solution, and the isotope is thereafter separated from the cyclic polyether.

  16. URANIUM SEPARATION PROCESS

    DOEpatents

    McVey, W.H.; Reas, W.H.

    1959-03-10

    The separation of uranium from an aqueous solution containing a water soluble uranyl salt is described. The process involves adding an alkali thiocyanate to the aqueous solution, contacting the resulting solution with methyl isobutyl ketons and separating the resulting aqueous and organic phase. The uranium is extracted in the organic phase as UO/sub 2/(SCN)/sub/.

  17. Vanguard Satellite Separation Mechanisms

    NASA Technical Reports Server (NTRS)

    Baumann, Robert C.

    1961-01-01

    Early in the Vanguard program it became apparent that a thoroughly reliable means of separating the satellite packages from the third-stage rocket would be required. A completely self -contained standard mechanism was developed with redundant firing circuits for use on both test vehicles and satellite-launching vehicles. A change in the experimental objectives of the test-vehicle payload units necessitated modification of some of the standard separation mechanisms. A strap, pull-pin, girth-ring separation device was developed which employed the basic actuation of the standard mechanisms. Evidence of residual burning of the third stage made it necessary to delay separation longer than the time designed into the long-delay separation device. The standard separation mechanism was modified and integrated with the satellite command receiver system so that a ground command after third-stage burnout would cause separation. Flight performance of the various separation mechanisms proved their reliability; they performed without failure in all Vanguard launchings.

  18. Working with Separation

    ERIC Educational Resources Information Center

    Krugman, Dorothy C.

    1971-01-01

    Discusses the role of the caseworker in providing support to children experiencing separation from their families and emphasizes the need to recognize that there are differences between those separation experiences dictated by the needs of children and those dictated by arbitrary or noncasework factors. (AJ)

  19. Overview of membrane separations

    SciTech Connect

    Noble, R.D.

    1987-01-01

    The field of membrane separations is discussed. The major membrane types and applications are outlined. The outlook with respect to research activities and commercial applications is surveyed. The advantages and disadvantages of this separation process are discussed. Certain applications where membranes may save energy and improve productivity are also discussed.

  20. A scheme of pulse compression lidar with enhanced modulated bandwidth for detection through scattering media

    NASA Astrophysics Data System (ADS)

    Yang, Cheng-hua; Zhang, Yong; Jin, Chen-fei; Xu, Lu; Yang, Xu; Wang, Qiang; Liu, Yue-hao; Zhao, Yuan

    2016-12-01

    This paper presents a scheme of pulse compression lidar with enhanced electrical modulated bandwidth. An ultra-wideband linear frequency modulated signal with a bandwidth of 50 GHz is generated using femtosecond laser and superimposed linear chirp fiber Bragg gratings in the transmitter, which separates the echo of the target from the backward scattered noise with low modulated frequency. An optical pulse compression system based on a negative dispersion fiber Bragg grating is used to compress the ultra-wideband linear frequency modulated signal in the receiver. SNR and range resolution of the proposed scheme are numerically simulated to prove its feasibility. The simulation results indicate that an enhancement of SNR by 15.8 dB can be achieved using the scheme, and the range resolution of the scheme increases from 0.68 m to 0.0027 m. It is therefore concluded that the proposed scheme is suitable for detection through scattering media.

  1. Comparison of Direct Eulerian Godunov and Lagrange Plus Remap, Artificial Viscosity Schemes

    SciTech Connect

    Pember, R B; Anderson, R W

    2001-03-30

    The authors compare two algorithms for solving the equations of unsteady inviscid compressible flow in an Eulerian frame: a staggered grid, Lagrange plus remap artificial viscosity scheme and a cell-centered, direct Eulerian higher-order Godunov scheme. They use the two methods to compute solutions to a number of one- and two-dimensional problems. The results show the accuracy of the two schemes to be generally equivalent. In a 1984 survey paper by Woodward and Colella, the Lagrange plus remap approach did not compare favorably with the higher-order Godunov methodology. They examine, therefore, how certain features of the staggered grid scheme considered here contribute to its improved accuracy. The critical features are shown to be the use of a monotonic artificial viscosity in the Lagrange step and, in the remap step, the use of a corner transport upwind scheme with van Leer limiters in conjunction with separate advection of internal and kinetic energies.

  2. Breaking and Fixing of an Identity Based Multi-Signcryption Scheme

    NASA Astrophysics Data System (ADS)

    Selvi, S. Sharmila Deva; Vivek, S. Sree; Rangan, C. Pandu

    Signcryption is a cryptographic primitive that provides authentication and confidentiality simultaneously in a single logical step. It is often required that multiple senders have to signcrypt a single message to a certain receiver. Obviously, it is inefficient to signcrypt the messages separately. An efficient alternative is to go for multi-signcryption. The concept of multi-signcryption is similar to that of multi-signatures with the added property - confidentiality. Recently, Jianhong et al. proposed an identity based multi-signcryption scheme. They claimed that their scheme is secure against adaptive chosen ciphertext attack and it is existentially unforgeable. In this paper, we show that their scheme is not secure against chosen plaintext attack and is existentially forgeable, we also provide a fix for the scheme and prove formally that the improved scheme is secure against both adaptive chosen ciphertext attack and existential forgery.

  3. Separators for flywheel rotors

    DOEpatents

    Bender, D.A.; Kuklo, T.C.

    1998-07-07

    A separator forms a connection between the rotors of a concentric rotor assembly. This separator allows for the relatively free expansion of outer rotors away from inner rotors while providing a connection between the rotors that is strong enough to prevent disassembly. The rotor assembly includes at least two rotors referred to as inner and outer flywheel rings or rotors. This combination of inner flywheel ring, separator, and outer flywheel ring may be nested to include an arbitrary number of concentric rings. The separator may be a segmented or continuous ring that abuts the ends of the inner rotor and the inner bore of the outer rotor. It is supported against centrifugal loads by the outer rotor and is affixed to the outer rotor. The separator is allowed to slide with respect to the inner rotor. It is made of a material that has a modulus of elasticity that is lower than that of the rotors. 10 figs.

  4. Separators for flywheel rotors

    DOEpatents

    Bender, Donald A.; Kuklo, Thomas C.

    1998-01-01

    A separator forms a connection between the rotors of a concentric rotor assembly. This separator allows for the relatively free expansion of outer rotors away from inner rotors while providing a connection between the rotors that is strong enough to prevent disassembly. The rotor assembly includes at least two rotors referred to as inner and outer flywheel rings or rotors. This combination of inner flywheel ring, separator, and outer flywheel ring may be nested to include an arbitrary number of concentric rings. The separator may be a segmented or continuous ring that abuts the ends of the inner rotor and the inner bore of the outer rotor. It is supported against centrifugal loads by the outer rotor and is affixed to the outer rotor. The separator is allowed to slide with respect to the inner rotor. It is made of a material that has a modulus of elasticity that is lower than that of the rotors.

  5. Substituted polyacetylene separation membrane

    DOEpatents

    Pinnau, I.; Morisato, Atsushi

    1998-01-13

    A separation membrane is described which is useful for gas separation, particularly separation of C{sub 2+} hydrocarbons from natural gas. The invention encompasses the membrane itself, methods of making it and processes for using it. The membrane comprises a polymer having repeating units of a hydrocarbon-based, disubstituted polyacetylene, having the general formula shown in the accompanying diagram, wherein R{sub 1} is chosen from the group consisting of C{sub 1}-C{sub 4} alkyl and phenyl, and wherein R{sub 2} is chosen from the group consisting of hydrogen and phenyl. In the most preferred embodiment, the membrane comprises poly(4-methyl-2-pentyne) [PMP]. The membrane exhibits good chemical resistance and has super-glassy properties with regard to separating certain large, condensable permeant species from smaller, less-condensable permeant species. The membranes may also be useful in other fluid separations. 4 figs.

  6. Substituted polyacetylene separation membrane

    DOEpatents

    Pinnau, Ingo; Morisato, Atsushi

    1998-01-13

    A separation membrane useful for gas separation, particularly separation of C.sub.2+ hydrocarbons from natural gas. The invention encompasses the membrane itself, methods of making it and processes for using it. The membrane comprises a polymer having repeating units of a hydrocarbon-based, disubstituted polyacetylene, having the general formula: ##STR1## wherein R.sub.1 is chosen from the group consisting of C.sub.1 -C.sub.4 alkyl and phenyl, and wherein R.sub.2 is chosen from the group consisting of hydrogen and phenyl. In the most preferred embodiment, the membrane comprises poly(4-methyl-2-pentyne) ›PMP!. The membrane exhibits good chemical resistance and has super-glassy properties with regard to separating certain large, condensable permeant species from smaller, less-condensable permeant species. The membranes may also be useful in other fluid separations.

  7. Isothermal separation processes

    NASA Technical Reports Server (NTRS)

    England, C.

    1982-01-01

    The isothermal processes of membrane separation, supercritical extraction and chromatography were examined using availability analysis. The general approach was to derive equations that identified where energy is consumed in these processes and how they compare with conventional separation methods. These separation methods are characterized by pure work inputs, chiefly in the form of a pressure drop which supplies the required energy. Equations were derived for the energy requirement in terms of regular solution theory. This approach is believed to accurately predict the work of separation in terms of the heat of solution and the entropy of mixing. It can form the basis of a convenient calculation method for optimizing membrane and solvent properties for particular applications. Calculations were made on the energy requirements for a membrane process separating air into its components.

  8. Exposure chamber

    DOEpatents

    Moss, Owen R.; Briant, James K.

    1983-01-01

    An exposure chamber includes an imperforate casing having a fluid inlet at the top and an outlet at the bottom. A single vertical series of imperforate trays is provided. Each tray is spaced on all sides from the chamber walls. Baffles adjacent some of the trays restrict and direct the flow to give partial flow back and forth across the chambers and downward flow past the lowermost pan adjacent a central plane of the chamber.

  9. Numerical solution of 3D Navier-Stokes equations with upwind implicit schemes

    NASA Technical Reports Server (NTRS)

    Marx, Yves P.

    1990-01-01

    An upwind MUSCL type implicit scheme for the three-dimensional Navier-Stokes equations is presented. Comparison between different approximate Riemann solvers (Roe and Osher) are performed and the influence of the reconstructions schemes on the accuracy of the solution as well as on the convergence of the method is studied. A new limiter is introduced in order to remove the problems usually associated with non-linear upwind schemes. The implementation of a diagonal upwind implicit operator for the three-dimensional Navier-Stokes equations is also discussed. Finally the turbulence modeling is assessed. Good prediction of separated flows are demonstrated if a non-equilibrium turbulence model is used.

  10. High-Order Energy Stable WENO Schemes

    NASA Technical Reports Server (NTRS)

    Yamaleev, Nail K.; Carpenter, Mark H.

    2008-01-01

    A new third-order Energy Stable Weighted Essentially NonOscillatory (ESWENO) finite difference scheme for scalar and vector linear hyperbolic equations with piecewise continuous initial conditions is developed. The new scheme is proven to be stable in the energy norm for both continuous and discontinuous solutions. In contrast to the existing high-resolution shock-capturing schemes, no assumption that the reconstruction should be total variation bounded (TVB) is explicitly required to prove stability of the new scheme. A rigorous truncation error analysis is presented showing that the accuracy of the 3rd-order ESWENO scheme is drastically improved if the tuning parameters of the weight functions satisfy certain criteria. Numerical results show that the new ESWENO scheme is stable and significantly outperforms the conventional third-order WENO finite difference scheme of Jiang and Shu in terms of accuracy, while providing essentially nonoscillatory solutions near strong discontinuities.

  11. Generalized Ramsey excitation scheme with suppressed light shift.

    PubMed

    Huntemann, N; Lipphardt, B; Okhapkin, M; Tamm, Chr; Peik, E; Taichenachev, A V; Yudin, V I

    2012-11-21

    We experimentally investigate a recently proposed optical excitation scheme V. I. Yudin et al. [Phys. Rev. A 82, 011804(R) (2010)] that is a generalization of Ramsey's method of separated oscillatory fields and consists of a sequence of three excitation pulses. The pulse sequence is tailored to produce a resonance signal that is immune to the light shift and other shifts of the transition frequency that are correlated with the interaction with the probe field. We investigate the scheme using a single trapped ^{171}Yb^{+} ion and excite the highly forbidden (2)S(1/2) - (2)F(7/2) electric-octupole transition under conditions where the light shift is much larger than the excitation linewidth, which is in the hertz range. The experiments demonstrate a suppression of the light shift by four orders of magnitude and an immunity against its fluctuations.

  12. Vector lifting scheme for phase-shifting holographic data compression

    NASA Astrophysics Data System (ADS)

    Xing, Yafei; Kaaniche, Mounir; Pesquet-Popescu, Béatrice; Dufaux, Frédéric

    2014-11-01

    With the increasing interest in holography in three-dimensional imaging applications, the use of hologram compression techniques is mandatory for storage and transmission purposes. The state-of-the-art approach aims at encoding separately each interference pattern by resorting to common still-image compression techniques. Contrary to such an independent scheme, a joint hologram coding scheme is investigated in this paper. More precisely, instead of encoding all the interference patterns, it is proposed that only two sets of data be compressed by taking into account the redundancies existing among them. The resulting data are encoded by applying a joint multiscale decomposition based on the vector lifting concept. Experimental results show the benefits that can be drawn from the proposed hologram compression approach.

  13. Process for phase separation

    DOEpatents

    Comolli, Alfred G.

    1979-01-01

    This invention provides a continuous process for separating a gaseous phase from a hydrocarbon liquid containing carbonaceous particulates and gases. The liquid is fed to a cylindrical separator, with the gaseous phase being removed therefrom as an overhead product, whereas the hydrocarbon liquid and the particulates are withdrawn as a bottoms product. By feeding the liquid tangentially to the separator and maintaining a particulate-liquid slurry downward velocity of from about 0.01 to about 0.25 fps in the separator, a total solids weight percent in the slurry of from about 0.1 to about 30%, a slurry temperature of from about 550.degree. to about 900.degree. F., a slurry residence time in the separator of from about 30 to about 360 seconds, and a length/diameter ratio for the separator of from about 20/1 to about 50/1, so that the characterization factor, .alpha., defined as ##STR1## DOES NOT EXCEED ABOUT 48 (.degree.R sec.sup.2)/ft, the deposit of carbonaceous materials on the interior surface of the separator may be substantially eliminated.

  14. Efficient implementation of weighted ENO schemes

    NASA Technical Reports Server (NTRS)

    Jiang, Guang-Shan; Shu, Chi-Wang

    1995-01-01

    In this paper, we further analyze, test, modify and improve the high order WENO (weighted essentially non-oscillatory) finite difference schemes of Liu, Osher and Chan. It was shown by Liu et al. that WENO schemes constructed from the r-th order (in L1 norm) ENO schemes are (r+1)-th order accurate. We propose a new way of measuring the smoothness of a numerical solution, emulating the idea of minimizing the total variation of the approximation, which results in a 5-th order WENO scheme for the case r = 3, instead of the 4-th order with the original smoothness measurement by Liu et al. This 5-th order WENO scheme is as fast as the 4-th order WENO scheme of Liu et al., and both schemes are about twice as fast as the 4-th order ENO schemes on vector supercomputers and as fast on serial and parallel computers. For Euler systems of gas dynamics, we suggest computing the weights from pressure and entropy instead of the characteristic values to simplify the costly characteristic procedure. The resulting WENO schemes are about twice as fast as the WENO schemes using the characteristic decompositions to compute weights, and work well for problems which do not contain strong shocks or strong reflected waves. We also prove that, for conservation laws with smooth solutions, all WENO schemes are convergent. Many numerical tests, including the 1D steady state nozzle flow problem and 2D shock entropy wave interaction problem, are presented to demonstrate the remarkable capability of the WENO schemes, especially the WENO scheme using the new smoothness measurement, in resolving complicated shock and flow structures. We have also applied Yang's artificial compression method to the WENO schemes to sharpen contact discontinuities.

  15. Chromatographic hydrogen isotope separation

    DOEpatents

    Aldridge, Frederick T.

    1981-01-01

    Intermetallic compounds with the CaCu.sub.5 type of crystal structure, particularly LaNiCo.sub.4 and CaNi.sub.5, exhibit high separation factors and fast equilibrium times and therefore are useful for packing a chromatographic hydrogen isotope separation colum. The addition of an inert metal to dilute the hydride improves performance of the column. A large scale mutli-stage chromatographic separation process run as a secondary process off a hydrogen feedstream from an industrial plant which uses large volumes of hydrogen can produce large quantities of heavy water at an effective cost for use in heavy water reactors.

  16. Chromatographic hydrogen isotope separation

    DOEpatents

    Aldridge, F.T.

    Intermetallic compounds with the CaCu/sub 5/ type of crystal structure, particularly LaNiCo/sub 4/ and CaNi/sub 5/, exhibit high separation factors and fast equilibrium times and therefore are useful for packing a chromatographic hydrogen isotope separation column. The addition of an inert metal to dilute the hydride improves performance of the column. A large scale multi-stage chromatographic separation process run as a secondary process off a hydrogen feedstream from an industrial plant which uses large volumes of hydrogen cn produce large quantities of heavy water at an effective cost for use in heavy water reactors.

  17. Asymmetric gas separation membranes

    SciTech Connect

    Malon, R. F.; Zampini, A.

    1984-12-04

    Asymmetric gas separation membranes of materials having selective permeation of at least one gas of a gaseous mixture over that of one or more remaining gases of the gaseous mixture, exhibit significantly improved permeation selectivities for the at least one gas when the asymmetric membrane is contacted on one or both surfaces with an effective amount of a Lewis acid. The improved asymmetric gas separation membranes, process for producing the improved membrane, and processes utilizing such membranes for selectively separating at least one gas from a gaseous mixture by permeation are disclosed.

  18. Asymmetric gas separation membranes

    SciTech Connect

    Malon, R. F.; Zampini, A.

    1984-09-18

    Asymmetric gas separation membranes of materials having selective permeation of at least one gas of a gaseous mixture over that of one or more remaining gases of the gaseous mixture, exhibit significantly improved permeation selectivities for the at least one gas when the asymmetric membrane is contacted on one or both surfaces with an effective amount of a Br nsted-Lowry acid. The improved asymmetric gas separation membranes, process for producing the improved membrane, and processes utilizing such membranes for selectively separating at least one gas from a gaseous mixture by permeation are disclosed.

  19. Enhance separations with electricity

    SciTech Connect

    Muralidhara, H.S.

    1994-05-01

    To satisfy growing environmental regulations, control energy costs, or just to stay competitive, one must improve existing separation technologies and make them more efficient. New challenges in food processing and requirements for novel purification technologies in the biotech industry also will require more efficient separation techniques. This paper discusses some enhanced separation processes based on the application of an electric field in the combined-fields approach. In a combined-fields approach, the emphasis is on the generation of additional driving forces to work simultaneously with the conventional driving force of the process. Here the authors concentrate on the application of an electric field to generate the additional driving force.

  20. Managing Flap Vortices via Separation Control

    NASA Technical Reports Server (NTRS)

    Greenblatt, David

    2006-01-01

    A pilot study was conducted on a flapped semi-span model to investigate the concept and viability of near-wake vortex management by means of boundary layer separation control. Passive control was achieved using a simple fairing and active control was achieved via zero mass-flux blowing slots. Vortex sheet strength, estimated by integrating surface pressures, was used to predict vortex characteristics based on inviscid rollup relations and vortices trailing the flaps were mapped using a seven-hole probe. Separation control was found to have a marked effect on vortex location, strength, tangential velocity, axial velocity and size over a wide range of angles of attack and control conditions. In general, the vortex trends were well predicted by the inviscid rollup relations. Manipulation of the separated flow near the flap edges exerted significant control over either outboard or inboard edge vortices while producing small lift and moment excursions. Unsteady surface pressures indicated that dynamic separation and attachment control can be exploited to perturb vortices at wavelengths shorter than a typical wingspan. In summary, separation control has the potential for application to time-independent or time-dependent wake alleviation schemes, where the latter can be deployed to minimize adverse effects on ride-quality and dynamic structural loading.

  1. Laser Isotope Separation Employing Condensation Repression

    SciTech Connect

    Eerkens, Jeff W.; Miller, William H.

    2004-09-15

    Molecular laser isotope separation (MLIS) techniques using condensation repression (CR) harvesting are reviewed and compared with atomic vapor laser isotope separation (AVLIS), gaseous diffusion (DIF), ultracentrifuges (UCF), and electromagnetic separations (EMS). Two different CR-MLIS or CRISLA (Condensation Repression Isotope Separation by Laser Activation) approaches have been under investigation at the University of Missouri (MU), one involving supersonic super-cooled free jets and dimer formation, and the other subsonic cold-wall condensation. Both employ mixtures of an isotopomer (e.g. {sup i}QF{sub 6}) and a carrier gas, operated at low temperatures and pressures. Present theories of VT relaxation, dimerization, and condensation are found to be unsatisfactory to explain/predict experimental CRISLA results. They were replaced by fundamentally new models that allow ab-initio calculation of isotope enrichments and predictions of condensation parameters for laser-excited and non-excited vapors which are in good agreement with experiment. Because of supersonic speeds, throughputs for free-jet CRISLA are a thousand times higher than cold-wall CRISLA schemes, and thus preferred for large-quantity Uranium enrichments. For small-quantity separations of (radioactive) medical isotopes, the simpler coldwall CRISLA method may be adequate.

  2. Readout scheme for Majorana parity states using a quantum dot

    NASA Astrophysics Data System (ADS)

    Hoving, Darryl; Gharavi, Kaveh; Baugh, Jonathan

    We propose and numerically study a scheme for reading out the parity state of a pair of Majorana bound states using a tunnel coupled quantum dot. The dot is coupled to one end of the topological wire but isolated from any reservoir, and is capacitively coupled to a charge sensor for measurement. The combined parity of the MBS-dot system is conserved and charge transfer between MBS and dot only occurs through resonant tunnelling. Resonance is controlled by the dot potential through a local gate and by the MBS splitting due to the overlap of the MBS pair wavefunctions. The latter splitting can be controlled by changing the position of the spatially separated, uncoupled MBS via a set of keyboard gates. Our simulations show that the oscillatory nature of the MBS splitting versus separation does not prevent high-fidelity readout. Indeed, the scheme can also be applied to measure the splitting versus separation, which would yield a clear signature of the topological state. With experimentally realistic parameters we find parity readout fidelities >99% should be feasible. This work was supported by the Natural Sciences and Engineering Research Council of Canada.

  3. Criminal exposure.

    PubMed

    1999-09-03

    In August, an HIV-positive man plead guilty to sexually assaulting a 14-year-old boy. The sleeping boy awoke to find [name removed] sexually assaulting him, while watching a pornographic video. [Name removed] plead guilty to the assault with intent to rape a child. In addition, [name removed] received three counts of indecent assault and battery on a child, and exposure of pornographic material to a minor. [Name removed] will remain on probation for five years, although the prosecution had recommended sentencing [name removed] to four or five years in prison. The boy continues to be tested for HIV.

  4. Scheme of thinking quantum systems

    NASA Astrophysics Data System (ADS)

    Yukalov, V. I.; Sornette, D.

    2009-11-01

    A general approach describing quantum decision procedures is developed. The approach can be applied to quantum information processing, quantum computing, creation of artificial quantum intelligence, as well as to analyzing decision processes of human decision makers. Our basic point is to consider an active quantum system possessing its own strategic state. Processing information by such a system is analogous to the cognitive processes associated to decision making by humans. The algebra of probability operators, associated with the possible options available to the decision maker, plays the role of the algebra of observables in quantum theory of measurements. A scheme is advanced for a practical realization of decision procedures by thinking quantum systems. Such thinking quantum systems can be realized by using spin lattices, systems of magnetic molecules, cold atoms trapped in optical lattices, ensembles of quantum dots, or multilevel atomic systems interacting with electromagnetic field.

  5. Molten salt electrolyte separator

    DOEpatents

    Kaun, Thomas D.

    1996-01-01

    A molten salt electrolyte/separator for battery and related electrochemical systems including a molten electrolyte composition and an electrically insulating solid salt dispersed therein, to provide improved performance at higher current densities and alternate designs through ease of fabrication.

  6. Inorganic separator technology program

    NASA Technical Reports Server (NTRS)

    Smatko, J. S.; Weaver, R. D.; Kalhammer, F. R.

    1973-01-01

    Testing and failure analyses of silver zinc cells with largely inorganic separators were performed. The results showed that the wet stand and cycle life objective of the silver-zinc cell development program were essentially accomplished and led to recommendations for cell composition, design, and operation that should yield further improvement in wet and cycle life. A series of advanced inorganic materials was successfully developed and formulated into rigid and semiflexible separator samples. Suitable screening tests for evaluation of largely inorganic separators were selected and modified for application to the separator materials. The results showed that many of these formulations are potentially superior to previously used materials and permitted selection of three promising materials for further evaluation in silver-zinc cells.

  7. Laminar-Separation Sensor

    NASA Technical Reports Server (NTRS)

    Manuel, G. S.; Carraway, D. L.; Lee, C. C.

    1991-01-01

    Reduction of viscous drag on airplanes explores limits of practical applications of natural laminar flow. Wind-tunnel and flight tests conducted to explore abilities of hot-film sensors to identify separation of laminar flow as principal mode of amplification of instability leading to transition from laminar to turbulent flow. Two different laminar-separation-sensor configurations developed and used to detect boundary-layer transitions. Results show hot-film laminar-separation-sensor technique viable means for detecting existence of transition as well as for indicating reversed flow in laminar-separation bubble. Refinement of sensor configurations provides tools necessary to explore, in all speed regimes, practical limits of laminar-flow applications and viscous-drag-reduction technology.

  8. Separable Arrowhead Microneedles

    PubMed Central

    Chu, Leonard Y.; Prausnitz, Mark R.

    2010-01-01

    Hypodermic needles cause pain and bleeding, produce biohazardous sharp waste and require trained personnel. To address these issues, we introduce separable arrowhead microneedles that rapidly and painlessly deliver drugs and vaccines to the skin. These needles are featured by micron-size sharp tips mounted on blunt shafts. Upon insertion in the skin, the sharp-tipped polymer arrowheads encapsulating drug separate from their metal shafts and remain embedded in the skin for subsequent dissolution and drug release. The blunt metal shafts can then be discarded. Due to rapid separation of the arrowhead tips from the shafts within seconds, administration using arrowhead microneedles can be carried out rapidly, while drug release kinetics can be independently controlled based on separable arrowhead formulation. Thus, drug and vaccine delivery using arrowhead microneedles are designed to offer a quick, convenient, safe and potentially self-administered method of drug delivery as an alternative to hypodermic needles. PMID:21047538

  9. Booster separation motor

    NASA Technical Reports Server (NTRS)

    1981-01-01

    The design, development, fabrication, testing, evaluation and flight qualification of the space shuttle booster separation motor is discussed. Delivery of flight hardware to support the research and development flights of the space shuttle is discussed.

  10. Separation by solvent extraction

    DOEpatents

    Holt, Jr., Charles H.

    1976-04-06

    17. A process for separating fission product values from uranium and plutonium values contained in an aqueous solution, comprising adding an oxidizing agent to said solution to secure uranium and plutonium in their hexavalent state; contacting said aqueous solution with a substantially water-immiscible organic solvent while agitating and maintaining the temperature at from -1.degree. to -2.degree. C. until the major part of the water present is frozen; continuously separating a solid ice phase as it is formed; separating a remaining aqueous liquid phase containing fission product values and a solvent phase containing plutonium and uranium values from each other; melting at least the last obtained part of said ice phase and adding it to said separated liquid phase; and treating the resulting liquid with a new supply of solvent whereby it is practically depleted of uranium and plutonium.

  11. Microsystem capillary separations

    DOEpatents

    TeGrotenhuis, Ward E [Kennewick, WA; Wegeng, Robert S [Richland, WA; Whyatt, Greg A [West Richland, WA; Stenkamp, Victoria S [Richland, WA; Gauglitz, Phillip A [Richland, WA

    2003-12-23

    Laminated, multiphase separators and contactors having wicking structures and gas flow channels are described. Some preferred embodiments are combined with microchannel heat exchange. Integrated systems containing these components are also part of the present invention.

  12. Separator for alkaline batteries

    NASA Technical Reports Server (NTRS)

    Hoyt, H. W.; Pfluger, H. L.

    1968-01-01

    Separator compositions have been tested as components of three-plate silver-zinc oxide cells in a standard cycling test. Six materials meet imposed requirements, giving cycling performance superior to cellophane.

  13. Monitored separation device

    NASA Technical Reports Server (NTRS)

    Jackson, George William (Inventor); Willson, Richard Coale (Inventor); Fox, George Edward (Inventor)

    2011-01-01

    A device for separating and purifying useful quantities of particles comprises: a. an anolyte reservoir connected to an anode, the anolyte reservoir containing an electrophoresis buffer; b. a catholyte reservoir connected to a cathode, the catholyte reservoir also containing the electrophoresis buffer; c. a power supply connected to the anode and to the cathode; d. a column having a first end inserted into the anolyte reservoir, a second end inserted into the catholyte reservoir, and containing a separation medium; e. a light source; f. a first optical fiber having a first fiber end inserted into the separation medium, and having a second fiber end connected to the light source; g. a photo detector; h. a second optical fiber having a third fiber end inserted into the separation medium, and having a fourth fiber end connected to the photo detector; and i. an ion-exchange membrane in the anolyte reservoir.

  14. Separation of Craniopagus Twins.

    PubMed

    Johnson, Reuben; Weir, Philip

    2016-01-01

    Separation of craniopagus twins is fraught by ethical issues. The surgery is high risk and may involve the sacrifice of one twin. We review surgical successes in separation of craniopagus twins and consider ethical and legal concepts affecting the decision to undertake such procedures. Our discussion considers how Gillett's potentiality principle and the concept of moral permissibility may be used to arrive at fair and realistic decisions.

  15. Hydrogen separation process

    DOEpatents

    Mundschau, Michael; Xie, Xiaobing; Evenson, IV, Carl; Grimmer, Paul; Wright, Harold

    2011-05-24

    A method for separating a hydrogen-rich product stream from a feed stream comprising hydrogen and at least one carbon-containing gas, comprising feeding the feed stream, at an inlet pressure greater than atmospheric pressure and a temperature greater than 200.degree. C., to a hydrogen separation membrane system comprising a membrane that is selectively permeable to hydrogen, and producing a hydrogen-rich permeate product stream on the permeate side of the membrane and a carbon dioxide-rich product raffinate stream on the raffinate side of the membrane. A method for separating a hydrogen-rich product stream from a feed stream comprising hydrogen and at least one carbon-containing gas, comprising feeding the feed stream, at an inlet pressure greater than atmospheric pressure and a temperature greater than 200.degree. C., to an integrated water gas shift/hydrogen separation membrane system wherein the hydrogen separation membrane system comprises a membrane that is selectively permeable to hydrogen, and producing a hydrogen-rich permeate product stream on the permeate side of the membrane and a carbon dioxide-rich product raffinate stream on the raffinate side of the membrane. A method for pretreating a membrane, comprising: heating the membrane to a desired operating temperature and desired feed pressure in a flow of inert gas for a sufficient time to cause the membrane to mechanically deform; decreasing the feed pressure to approximately ambient pressure; and optionally, flowing an oxidizing agent across the membrane before, during, or after deformation of the membrane. A method of supporting a hydrogen separation membrane system comprising selecting a hydrogen separation membrane system comprising one or more catalyst outer layers deposited on a hydrogen transport membrane layer and sealing the hydrogen separation membrane system to a porous support.

  16. SEPARATIONS BY ELECTRODIALYSIS

    DOEpatents

    Webb, W.H.; Vie, J.D.

    1962-06-12

    A method is given for separating cesium, cerium, zirconium, and uranyl ions frora a common solution by electrodialysis. An anion exchange membrane and a cation exchange membrane are placed on either side of the feed solution compartment; the former is in electrolytic contact with an anode and the latter with cathode. On acidification of the feed solution to a critical value of 0.5 N and passage of a current from the anode to the cathode, the desired separations tske place. (AEC)

  17. Matroids and quantum-secret-sharing schemes

    SciTech Connect

    Sarvepalli, Pradeep; Raussendorf, Robert

    2010-05-15

    A secret-sharing scheme is a cryptographic protocol to distribute a secret state in an encoded form among a group of players such that only authorized subsets of the players can reconstruct the secret. Classically, efficient secret-sharing schemes have been shown to be induced by matroids. Furthermore, access structures of such schemes can be characterized by an excluded minor relation. No such relations are known for quantum secret-sharing schemes. In this paper we take the first steps toward a matroidal characterization of quantum-secret-sharing schemes. In addition to providing a new perspective on quantum-secret-sharing schemes, this characterization has important benefits. While previous work has shown how to construct quantum-secret-sharing schemes for general access structures, these schemes are not claimed to be efficient. In this context the present results prove to be useful; they enable us to construct efficient quantum-secret-sharing schemes for many general access structures. More precisely, we show that an identically self-dual matroid that is representable over a finite field induces a pure-state quantum-secret-sharing scheme with information rate 1.

  18. A Linearized Prognostic Cloud Scheme in NASAs Goddard Earth Observing System Data Assimilation Tools

    NASA Technical Reports Server (NTRS)

    Holdaway, Daniel; Errico, Ronald M.; Gelaro, Ronald; Kim, Jong G.; Mahajan, Rahul

    2015-01-01

    A linearized prognostic cloud scheme has been developed to accompany the linearized convection scheme recently implemented in NASA's Goddard Earth Observing System data assimilation tools. The linearization, developed from the nonlinear cloud scheme, treats cloud variables prognostically so they are subject to linearized advection, diffusion, generation, and evaporation. Four linearized cloud variables are modeled, the ice and water phases of clouds generated by large-scale condensation and, separately, by detraining convection. For each species the scheme models their sources, sublimation, evaporation, and autoconversion. Large-scale, anvil and convective species of precipitation are modeled and evaporated. The cloud scheme exhibits linearity and realistic perturbation growth, except around the generation of clouds through large-scale condensation. Discontinuities and steep gradients are widely used here and severe problems occur in the calculation of cloud fraction. For data assimilation applications this poor behavior is controlled by replacing this part of the scheme with a perturbation model. For observation impacts, where efficiency is less of a concern, a filtering is developed that examines the Jacobian. The replacement scheme is only invoked if Jacobian elements or eigenvalues violate a series of tuned constants. The linearized prognostic cloud scheme is tested by comparing the linear and nonlinear perturbation trajectories for 6-, 12-, and 24-h forecast times. The tangent linear model performs well and perturbations of clouds are well captured for the lead times of interest.

  19. Technical note: Improving the AWAT filter with interpolation schemes for advanced processing of high resolution data

    NASA Astrophysics Data System (ADS)

    Peters, Andre; Nehls, Thomas; Wessolek, Gerd

    2016-06-01

    Weighing lysimeters with appropriate data filtering yield the most precise and unbiased information for precipitation (P) and evapotranspiration (ET). A recently introduced filter scheme for such data is the AWAT (Adaptive Window and Adaptive Threshold) filter (Peters et al., 2014). The filter applies an adaptive threshold to separate significant from insignificant mass changes, guaranteeing that P and ET are not overestimated, and uses a step interpolation between the significant mass changes. In this contribution we show that the step interpolation scheme, which reflects the resolution of the measuring system, can lead to unrealistic prediction of P and ET, especially if they are required in high temporal resolution. We introduce linear and spline interpolation schemes to overcome these problems. To guarantee that medium to strong precipitation events abruptly following low or zero fluxes are not smoothed in an unfavourable way, a simple heuristic selection criterion is used, which attributes such precipitations to the step interpolation. The three interpolation schemes (step, linear and spline) are tested and compared using a data set from a grass-reference lysimeter with 1 min resolution, ranging from 1 January to 5 August 2014. The selected output resolutions for P and ET prediction are 1 day, 1 h and 10 min. As expected, the step scheme yielded reasonable flux rates only for a resolution of 1 day, whereas the other two schemes are well able to yield reasonable results for any resolution. The spline scheme returned slightly better results than the linear scheme concerning the differences between filtered values and raw data. Moreover, this scheme allows continuous differentiability of filtered data so that any output resolution for the fluxes is sound. Since computational burden is not problematic for any of the interpolation schemes, we suggest always using the spline scheme.

  20. A Cartesian scheme for compressible multimaterial models in 3D

    NASA Astrophysics Data System (ADS)

    de Brauer, Alexia; Iollo, Angelo; Milcent, Thomas

    2016-05-01

    We model the three-dimensional interaction of compressible materials separated by sharp interfaces. We simulate fluid and hyperelastic solid flows in a fully Eulerian framework. The scheme is the same for all materials and can handle large deformations and frictionless contacts. Necessary conditions for hyperbolicity of the hyperelastic neohookean model in three dimensions are proved thanks to an explicit computation of the characteristic speeds. We present stiff multimaterial interactions including air-helium and water-air shock interactions, projectile-shield impacts in air and rebounds.

  1. Rapid Parameterization Schemes for Aircraft Shape Optimization

    NASA Technical Reports Server (NTRS)

    Li, Wu

    2012-01-01

    A rapid shape parameterization tool called PROTEUS is developed for aircraft shape optimization. This tool can be applied directly to any aircraft geometry that has been defined in PLOT3D format, with the restriction that each aircraft component must be defined by only one data block. PROTEUS has eight types of parameterization schemes: planform, wing surface, twist, body surface, body scaling, body camber line, shifting/scaling, and linear morphing. These parametric schemes can be applied to two types of components: wing-type surfaces (e.g., wing, canard, horizontal tail, vertical tail, and pylon) and body-type surfaces (e.g., fuselage, pod, and nacelle). These schemes permit the easy setup of commonly used shape modification methods, and each customized parametric scheme can be applied to the same type of component for any configuration. This paper explains the mathematics for these parametric schemes and uses two supersonic configurations to demonstrate the application of these schemes.

  2. Curvilinear bicubic spline fit interpolation scheme

    NASA Technical Reports Server (NTRS)

    Chi, C.

    1973-01-01

    Modification of the rectangular bicubic spline fit interpolation scheme so as to make it suitable for use with a polar grid pattern. In the proposed modified scheme the interpolation function is expressed in terms of the radial length and the arc length, and the shape of the patch, which is a wedge or a truncated wedge, is taken into account implicitly. Examples are presented in which the proposed interpolation scheme was used to reproduce the equations of a hemisphere.

  3. Short Signature Scheme From Bilinear Pairings

    DTIC Science & Technology

    2010-11-01

    model. 3.3 Efficiency We compare our signature scheme with the BLS scheme and ZSS scheme from the implementation point of view. PO, SM , PA, Squ, Inv, MTP ...1 SM 1 SM 2 SM Signing 1 MTP , 1 SM 1 H, 1 Inv, 1 SM 1 H, 1 Squ, 1 Inv, 1 SM Verification 1 MTP , 2 PO 1 H, 1 SM , 1 PO 1 H, 1 Squ, 1 SM , 2 PA, 1 PO

  4. A cascaded coding scheme for error control

    NASA Technical Reports Server (NTRS)

    Shu, L.; Kasami, T.

    1985-01-01

    A cascade coding scheme for error control is investigated. The scheme employs a combination of hard and soft decisions in decoding. Error performance is analyzed. If the inner and outer codes are chosen properly, extremely high reliability can be attained even for a high channel bit-error-rate. Some example schemes are evaluated. They seem to be quite suitable for satellite down-link error control.

  5. Gulf stream separation dynamics

    NASA Astrophysics Data System (ADS)

    Schoonover, Joseph

    Climate models currently struggle with the more traditional, coarse ( O(100 km) ) representation of the ocean. In these coarse ocean simulations, western boundary currents are notoriously difficult to model accurately. The modeled Gulf Stream is typically seen exhibiting a mean pathway that is north of observations, and is linked to a warm sea-surface temperature bias in the Mid-Atlantic Bight. Although increased resolution ( O(10 km) ) improves the modeled Gulf Stream position, there is no clean recipe for obtaining the proper pathway. The 70 year history of literature on the Gulf Stream separation suggests that we have not reached a resolution on the dynamics that control the current's pathway just south of the Mid-Atlantic Bight. Without a concrete knowledge on the separation dynamics, we cannot provide a clean recipe for accurately modeling the Gulf Stream at increased resolutions. Further, any reliable parameterization that yields a realistic Gulf Stream path must express the proper physics of separation. The goal of this dissertation is to determine what controls the Gulf Stream separation. To do so, we examine the results of a model intercomparison study and a set of numerical regional terraforming experiments. It is argued that the separation is governed by local dynamics that are most sensitive to the steepening of the continental shelf, consistent with the topographic wave arrest hypothesis of Stern (1998). A linear extension of Stern's theory is provided, which illustrates that wave arrest is possible for a continuously stratified fluid.

  6. Carter separable electromagnetic fields

    NASA Astrophysics Data System (ADS)

    Lynden-Bell, D.

    2000-02-01

    The purely electromagnetic analogue in flat space of Kerr's metric in general relativity is only rarely considered. Here we carry out in flat space a programme similar to Carter's investigation of metrics in general relativity in which the motion of a charged particle is separable. We concentrate on the separability of the motion (be it classical, relativistic or quantum) of a charged particle in electromagnetic fields that lie in planes through an axis of symmetry. In cylindrical polar coordinates (t,R,φ,z) the four-vector potential takes the form [formmu2] is the unit toroidal vector. The forms of the functions Φ(R,z) and A(R,z) are sought that allow separable motion. This occurs for relativistic motion only when AR,Φ and A2-Φ2 are all of the separable form ζ(λ)-η(μ)]/(λ-μ), where ζ and η are arbitrary functions, and λ and μ are spheroidal coordinates or degenerations thereof. The special forms of A and Φ that allow this are deduced. They include the Kerr metric analogue, with E+iB=-∇{q[(r-ia).(r-ia)]-1/2}. Rather more general electromagnetic fields allow separation when the motion is non-relativistic. The investigation is extended to fields that lie in parallel planes. Connections to Larmor's theorem are remarked upon.

  7. Organic Separation Test Results

    SciTech Connect

    Russell, Renee L.; Rinehart, Donald E.; Peterson, Reid A.

    2014-09-22

    Separable organics have been defined as “those organic compounds of very limited solubility in the bulk waste and that can form a separate liquid phase or layer” (Smalley and Nguyen 2013), and result from three main solvent extraction processes: U Plant Uranium Recovery Process, B Plant Waste Fractionation Process, and Plutonium Uranium Extraction (PUREX) Process. The primary organic solvents associated with tank solids are TBP, D2EHPA, and NPH. There is concern that, while this organic material is bound to the sludge particles as it is stored in the tanks, waste feed delivery activities, specifically transfer pump and mixer pump operations, could cause the organics to form a separated layer in the tank farms feed tank. Therefore, Washington River Protection Solutions (WRPS) is experimentally evaluating the potential of organic solvents separating from the tank solids (sludge) during waste feed delivery activities, specifically the waste mixing and transfer processes. Given the Hanford Tank Waste Treatment and Immobilization Plant (WTP) waste acceptance criteria per the Waste Feed Acceptance Criteria document (24590-WTP-RPT-MGT-11-014) that there is to be “no visible layer” of separable organics in the waste feed, this would result in the batch being unacceptable to transfer to WTP. This study is of particular importance to WRPS because of these WTP requirements.

  8. On Tenth Order Central Spatial Schemes

    SciTech Connect

    Sjogreen, B; Yee, H C

    2007-05-14

    This paper explores the performance of the tenth-order central spatial scheme and derives the accompanying energy-norm stable summation-by-parts (SBP) boundary operators. The objective is to employ the resulting tenth-order spatial differencing with the stable SBP boundary operators as a base scheme in the framework of adaptive numerical dissipation control in high order multistep filter schemes of Yee et al. (1999), Yee and Sj{umlt o}green (2002, 2005, 2006, 2007), and Sj{umlt o}green and Yee (2004). These schemes were designed for multiscale turbulence flows including strong shock waves and combustion.

  9. Nonlinearly stable compact schemes for shock calculations

    NASA Technical Reports Server (NTRS)

    Cockburn, Bernardo; Shu, Chi-Wang

    1992-01-01

    The applications of high-order, compact finite difference methods in shock calculations are discussed. The main concern is to define a local mean which will serve as a reference for introducing a local nonlinear limiting to control spurious numerical oscillations while maintaining the formal accuracy of the scheme. For scalar conservation laws, the resulting schemes can be proven total-variation stable in one space dimension and maximum-norm stable in multiple space dimensions. Numerical examples are shown to verify accuracy and stability of such schemes for problems containing shocks. These ideas can also be applied to other implicit schemes such as the continuous Galerkin finite element methods.

  10. Flow separation detector

    NASA Technical Reports Server (NTRS)

    Mateer, G. C.; Brosh, A. (Inventor)

    1977-01-01

    An arrangement for sensing the fluid separation along a surface which employs a thermally insulating element having a continuous surface blending into and forming a part of the fluid flow surface is described. A sudden decrease in the temperature of the downstream sensor conductor and concomitant increase in the temperature of the upstream sensor conductor is an indication of the separation. When the temperatures are returned to the state achieved during normal flow, the indicator thereby indicates the normal, attached fluid flow. The conductors may be, for example, wires or thin films, and should be within the viscous sub-layer of the expected fluid flow. A single heater and several pairs of sensors and corresponding sensor conductors may be used to detect not only the fluid flow and the separation, but the direction of the fluid flow, over the fluid flow surface.

  11. Membrane separation of hydrocarbons

    DOEpatents

    Chang, Y. Alice; Kulkarni, Sudhir S.; Funk, Edward W.

    1986-01-01

    Mixtures of heavy oils and light hydrocarbons may be separated by passing the mixture through a polymeric membrane. The membrane which is utilized to effect the separation comprises a polymer which is capable of maintaining its integrity in the presence of hydrocarbon compounds and which has been modified by being subjected to the action of a sulfonating agent. Sulfonating agents which may be employed will include fuming sulfuric acid, chlorosulfonic acid, sulfur trioxide, etc., the surface or bulk modified polymer will contain a degree of sulfonation ranging from about 15 to about 50%. The separation process is effected at temperatures ranging from about ambient to about 100.degree. C. and pressures ranging from about 50 to about 1000 psig.

  12. Mass Separation by Metamaterials

    NASA Astrophysics Data System (ADS)

    Restrepo-Flórez, Juan Manuel; Maldovan, Martin

    2016-02-01

    Being able to manipulate mass flow is critically important in a variety of physical processes in chemical and biomolecular science. For example, separation and catalytic systems, which requires precise control of mass diffusion, are crucial in the manufacturing of chemicals, crystal growth of semiconductors, waste recovery of biological solutes or chemicals, and production of artificial kidneys. Coordinate transformations and metamaterials are powerful methods to achieve precise manipulation of molecular diffusion. Here, we introduce a novel approach to obtain mass separation based on metamaterials that can sort chemical and biomolecular species by cloaking one compound while concentrating the other. A design strategy to realize such metamaterial using homogeneous isotropic materials is proposed. We present a practical case where a mixture of oxygen and nitrogen is manipulated using a metamaterial that cloaks nitrogen and concentrates oxygen. This work lays the foundation for molecular mass separation in biophysical and chemical systems through metamaterial devices.

  13. Optimal separable bases and molecular collisions

    SciTech Connect

    Poirier, Lionel W.

    1997-12-01

    A new methodology is proposed for the efficient determination of Green`s functions and eigenstates for quantum systems of two or more dimensions. For a given Hamiltonian, the best possible separable approximation is obtained from the set of all Hilbert space operators. It is shown that this determination itself, as well as the solution of the resultant approximation, are problems of reduced dimensionality for most systems of physical interest. Moreover, the approximate eigenstates constitute the optimal separable basis, in the sense of self-consistent field theory. These distorted waves give rise to a Born series with optimized convergence properties. Analytical results are presented for an application of the method to the two-dimensional shifted harmonic oscillator system. The primary interest however, is quantum reactive scattering in molecular systems. For numerical calculations, the use of distorted waves corresponds to numerical preconditioning. The new methodology therefore gives rise to an optimized preconditioning scheme for the efficient calculation of reactive and inelastic scattering amplitudes, especially at intermediate energies. This scheme is particularly suited to discrete variable representations (DVR`s) and iterative sparse matrix methods commonly employed in such calculations. State to state and cumulative reactive scattering results obtained via the optimized preconditioner are presented for the two-dimensional collinear H + H2 → H2 + H system. Computational time and memory requirements for this system are drastically reduced in comparison with other methods, and results are obtained for previously prohibitive energy regimes.

  14. Separation of organic liquids

    SciTech Connect

    Pasternak, M.; Bartels, C.R.; Reale, J. Jr.

    1989-01-17

    The method is described comprising: concentrating a charge solution containing methanol and either dimethyl carbonate or methyl t-butyl ether oxygenate by, maintaining a membrane of non-porous separating layer of cast polyvinyl alcohol which has been crosslinked with an aliphatic polyaldehyde containing at least three carbon atoms including those in the aldehyde groups; maintaining a pressure drop across the non-porous separating layer of polyvinyl alcohol; passing a charge aqueous solution containing methanol and either dimethyl carbonate or methyl t-butyl ether oxygenate into contact with the high pressure side of the non-porous separating layer of polyvinyl alcohol having properties which enable at least a portion of the methanol in the charge solution and a lesser portion of oxygenate to pass by pervaporation through the non-porous separating layer of polyvinyl alcohol as a lean mixture containing more methanol and less oxygenate than are present in the charge solution and the charge solution is converted to a rich liquid containing less methanol and more oxygenate than are present in the charge solution; recovering as permeate from the low pressure side of the non-porous separating layer of polyvinyl alcohol the lean mixture containing more methanol and less oxygenate than are present in the charge solution, the lean mixture being recovered in vapor phase at a pressure below the vapor pressure thereof; and recovering as retentate from the high pressure side of the non-porous separating layer the rich liquid containing a lower methanol content and a higher oxygenate content than are present in the charge solution.

  15. Separation membrane development

    SciTech Connect

    Lee, M.W.

    1998-08-01

    A ceramic membrane has been developed to separate hydrogen from other gases. The method used is a sol-gel process. A thin layer of dense ceramic material is coated on a coarse ceramic filter substrate. The pore size distribution in the thin layer is controlled by a densification of the coating materials by heat treatment. The membrane has been tested by permeation measurement of the hydrogen and other gases. Selectivity of the membrane has been achieved to separate hydrogen from carbon monoxide. The permeation rate of hydrogen through the ceramic membrane was about 20 times larger than Pd-Ag membrane.

  16. SULFIDE METHOD PLUTONIUM SEPARATION

    DOEpatents

    Duffield, R.B.

    1958-08-12

    A process is described for the recovery of plutonium from neutron irradiated uranium solutions. Such a solution is first treated with a soluble sullide, causing precipitation of the plutoniunn and uraniunn values present, along with those impurities which form insoluble sulfides. The precipitate is then treated with a solution of carbonate ions, which will dissolve the uranium and plutonium present while the fission product sulfides remain unaffected. After separation from the residue, this solution may then be treated by any of the usual methods, such as formation of a lanthanum fluoride precipitate, to effect separation of plutoniunn from uranium.

  17. Gas separation membranes

    DOEpatents

    Schell, William J.

    1979-01-01

    A dry, fabric supported, polymeric gas separation membrane, such as cellulose acetate, is prepared by casting a solution of the polymer onto a shrinkable fabric preferably formed of synthetic polymers such as polyester or polyamide filaments before washing, stretching or calendering (so called griege goods). The supported membrane is then subjected to gelling, annealing, and drying by solvent exchange. During the processing steps, both the fabric support and the membrane shrink a preselected, controlled amount which prevents curling, wrinkling or cracking of the membrane in flat form or when spirally wound into a gas separation element.

  18. WET FLUORIDE SEPARATION METHOD

    DOEpatents

    Seaborg, G.T.; Gofman, J.W.; Stoughton, R.W.

    1958-11-25

    The separation of U/sup 233/ from thorium, protactinium, and fission products present in neutron-irradiated thorium is accomplished by dissolving the irradiated materials in aqueous nitric acid, adding either a soluble fluoride, iodate, phosphate, or oxalate to precipltate the thorium, separating the precipltate from the solution, and then precipitating uranlum and protactinium by alkalizing the solution. The uranium and protactinium precipitate is removcd from the solution and dissolved in nitric acid. The uranyl nitrate may then be extracted from the acid solution by means of ether, and the protactinium recovered from the aqueous phase.

  19. SEPARATION OF FLUID MIXTURES

    DOEpatents

    Lipscomb, R.; Craig, A.; Labrow, S.; Dunn, J.F.

    1958-10-28

    An apparatus is presented for separating gaseous mixtures by selectively freezing a constituent of the mixture and subsequently separating the frozen gas. The gas mixture is passed through a cylinder fltted with a cooling jacket, causing one gas to freeze on the walls of the cylinder. A set of scraper blades are provided in the interior of the cyllnder, and as the blades oscillate, the frozen gas is scraped to the bottom of the cylinder. Means are provided for the frozen material to pass into a heating chamber where it is vaporized and the product gas collected.

  20. Multistage Electrophoretic Separators

    NASA Technical Reports Server (NTRS)

    Thomas, Nathan; Doyle, John F.; Kurk, Andy; Vellinger, John C.; Todd, Paul

    2006-01-01

    A multistage electrophoresis apparatus has been invented for use in the separation of cells, protein molecules, and other particles and solutes in concentrated aqueous solutions and suspensions. The design exploits free electrophoresis but overcomes the deficiencies of prior free-electrophoretic separators by incorporating a combination of published advances in mathematical modeling of convection, sedimentation, electro-osmotic flow, and the sedimentation and aggregation of droplets. In comparison with other electrophoretic separators, these apparatuses are easier to use and are better suited to separation in relatively large quantities characterized in the art as preparative (in contradistinction to smaller quantities characterized in the art as analytical). In a multistage electrophoretic separator according to the invention, an applied vertical steady electric field draws the electrically charged particles of interest from within a cuvette to within a collection cavity that has been moved into position of the cuvette. There are multiple collection cavities arranged in a circle; each is aligned with the cuvette for a prescribed short time. The multistage, short-migration-path character of the invention solves, possibly for the first time, the fluid-instability problems associated with free electrophoresis. The figure shows a prototype multistage electrophoretic separator that includes four sample stations and five collection stages per sample. At each sample station, an aqueous solution or suspension containing charged species to be separated is loaded into a cuvette, which is machined into a top plate. The apparatus includes a lower plate, into which 20 collection cavities have been milled. Each cavity is filled with an electrophoresis buffer solution. For the collection of an electrophoretic fraction, the lower plate is rotated to move a designated collection cavity into alignment with the opening of the cuvette. An electric field is then applied between a non

  1. Separation techniques: Chromatography

    PubMed Central

    Coskun, Ozlem

    2016-01-01

    Chromatography is an important biophysical technique that enables the separation, identification, and purification of the components of a mixture for qualitative and quantitative analysis. Proteins can be purified based on characteristics such as size and shape, total charge, hydrophobic groups present on the surface, and binding capacity with the stationary phase. Four separation techniques based on molecular characteristics and interaction type use mechanisms of ion exchange, surface adsorption, partition, and size exclusion. Other chromatography techniques are based on the stationary bed, including column, thin layer, and paper chromatography. Column chromatography is one of the most common methods of protein purification. PMID:28058406

  2. Separators for electrochemical cells

    DOEpatents

    Carlson, Steven Allen; Anakor, Ifenna Kingsley

    2014-11-11

    Provided are separators for use in an electrochemical cell comprising (a) an inorganic oxide and (b) an organic polymer, wherein the inorganic oxide comprises organic substituents. Preferably, the inorganic oxide comprises an hydrated aluminum oxide of the formula Al.sub.2O.sub.3.xH.sub.2O, wherein x is less than 1.0, and wherein the hydrated aluminum oxide comprises organic substituents, preferably comprising a reaction product of a multifunctional monomer and/or organic carbonate with an aluminum oxide, such as pseudo-boehmite and an aluminum oxide. Also provided are electrochemical cells comprising such separators.

  3. Spiral fluid separator

    NASA Technical Reports Server (NTRS)

    Robertson, Glen A. (Inventor)

    1993-01-01

    A fluid separator for separating particulate matter such as contaminates is provided which includes a series of spiral tubes of progressively decreasing cross sectional area connected in series. Each tube has an outlet on the outer curvature of the spiral. As fluid spirals down a tube, centrifugal force acts to force the heavier particulate matter to the outer wall of the tube, where it exits through the outlet. The remaining, and now cleaner, fluid reaches the next tube, which is smaller in cross sectional area, where the process is repeated. The fluid which comes out the final tube is diminished of particulate matter.

  4. Electrochromatographic separation of proteins

    NASA Technical Reports Server (NTRS)

    Basak, S. K.; Velayudhan, A.; Kohlmann, K.; Ladisch, M. R.; Mitchell, C. A. (Principal Investigator)

    1995-01-01

    We have developed a modified electrochromatography system which minimizes Joule heating at electric field strengths up to 125 V/cm. A non-linear equilibrium model is described which incorporates electrophoretic mobility, hydrodynamic flow velocity, and an electrically induced concentration polarization at the surface of the stationary phase. This model is able to provide useful estimates of protein retention time and velocity in a column packed with Sephadex gel and subjected to an electric field. A correlation of electrophoretic mobility of peptide and proteins with respect to their charge, molecular mass, and asymmetry enables the selection of solute target molecules for electrochromatographic separations. Good separation of protein mixtures have been obtained.

  5. All-solid-state Z-scheme photocatalytic systems.

    PubMed

    Zhou, Peng; Yu, Jiaguo; Jaroniec, Mietek

    2014-08-06

    The current rapid industrial development causes the serious energy and environmental crises. Photocatalyts provide a potential strategy to solve these problems because these materials not only can directly convert solar energy into usable or storable energy resources but also can decompose organic pollutants under solar-light irradiation. However, the aforementioned applications require photocatalysts with a wide absorption range, long-term stability, high charge-separation efficiency and strong redox ability. Unfortunately, it is often difficult for a single-component photocatalyst to simultaneously fulfill all these requirements. The artificial heterogeneous Z-scheme photocatalytic systems, mimicking the natural photosynthesis process, overcome the drawbacks of single-component photocatalysts and satisfy those aforementioned requirements. Such multi-task systems have been extensively investigated in the past decade. Especially, the all-solid-state Z-scheme photocatalytic systems without redox pair have been widely used in the water splitting, solar cells, degradation of pollutants and CO2 conversion, which have a huge potential to solve the current energy and environmental crises facing the modern industrial development. Thus, this review gives a concise overview of the all-solid-state Z-scheme photocatalytic systems, including their composition, construction, optimization and applications.

  6. Blood plasma separation in elevated dimension T-shaped microchannel.

    PubMed

    Tripathi, Siddhartha; Prabhakar, Amit; Kumar, Nishant; Singh, Shiv Govind; Agrawal, Amit

    2013-06-01

    In recent years, microfluidic chips have proven ideal tools for biochemical analysis, which, however, demands a unique and compatible plasma separation scheme. Various research groups have established continuous flow separation methods in microfluidic devices; however, they have worked with relatively small dimension microchannels (similar to the blood cell diameter). The present work demonstrates separation of plasma by utilizing the hydrodynamic separation techniques in microchannels with size of the order of mm. The separation process exploits the phenomenon, which is very similar to that of plasma skimming explained under Zweifach-Fung bifurcation law. The present experiments demonstrates for, the first time, that applicability of the Zweifach-Fung bifurcation law can be extended to dimensions much higher than the suspended particle size. The T-microchannel device (comprising perpendicularly connected blood and plasma channels) were micro-fabricated using conventional PDMS micro-molding techniques. Three variables (feed hematocrit, main channel width, and flow rate distributions) were identified as the important parameters which define the device's efficiency for the blood plasma separation. A plasma separation efficiency of 99.7 % was achieved at a high flow ratio. Novel concepts of 2-stage or multiple plasma channel designs are also proposed to yield high separation efficiency with undiluted blood. The possible underlying principle causing plasma separation (viz. aggregation and shear thinning) are investigated in detail as part of this work. The results are significant because they show nearly 100 % separations in microchannels which are much easier to fabricate than previously designed devices.

  7. SEPARATION BY ADSORPTION

    DOEpatents

    Lowe, C.S.

    1959-06-16

    Separation of Pu from fission products by adsorption on hydrous aluminum silicate is described. The Pu in a HNO/sub 3/ solution is oxidized to the hexavalent state and contacted with the silicate which adsorbs fission products. (T.R.H.)

  8. Molten salt electrolyte separator

    DOEpatents

    Kaun, T.D.

    1996-07-09

    The patent describes a molten salt electrolyte/separator for battery and related electrochemical systems including a molten electrolyte composition and an electrically insulating solid salt dispersed therein, to provide improved performance at higher current densities and alternate designs through ease of fabrication. 5 figs.

  9. Chemotactic separation of enzymes.

    PubMed

    Dey, Krishna Kanti; Das, Sambeeta; Poyton, Matthew F; Sengupta, Samudra; Butler, Peter J; Cremer, Paul S; Sen, Ayusman

    2014-12-23

    We demonstrate a procedure for the separation of enzymes based on their chemotactic response toward an imposed substrate concentration gradient. The separation is observed within a two-inlet, five-outlet microfluidic network, designed to allow mixtures of active (ones that catalyze substrate turnover) and inactive (ones that do not catalyze substrate turnover) enzymes, labeled with different fluorophores, to flow through one of the inlets. Substrate solution prepared in phosphate buffer was introduced through the other inlet of the device at the same flow rate. The steady-state concentration profiles of the enzymes were obtained at specific positions within the outlets of the microchannel using fluorescence microscopy. In the presence of a substrate concentration gradient, active enzyme molecules migrated preferentially toward the substrate channel. The excess migration of the active enzyme molecules was quantified in terms of an enrichment coefficient. Experiments were carried out with different pairs of enzymes. Coupling the physics of laminar flow of liquid and molecular diffusion, multiphysics simulations were carried out to estimate the extent of the chemotactic separation. Our results show that, with appropriate microfluidic arrangement, molecular chemotaxis leads to spontaneous separation of active enzyme molecules from their inactive counterparts of similar charge and size.

  10. METHOD OF SEPARATING NEPTUNIUM

    DOEpatents

    Seaborg, G.T.

    1961-10-24

    plutonium in an aqueous solution containing sulfate ions. The process consists of contacting the solution with an alkali metal bromate, digesting the resulting mixture at 15 to 25 deg C for a period of time not more than that required to oxidize the neptunium, adding lanthanum ions and fluoride ions, and separating the plutonium-containing precipitate thus formed from the supernatant solution. (AEC)

  11. Hydrogen isotope separation

    DOEpatents

    Bartlit, J.R.; Denton, W.H.; Sherman, R.H.

    Disclosed is a system of four cryogenic fractional distillation columns interlinked with two equilibrators for separating a DT and hydrogen feed stream into four product streams, consisting of a stream of high purity D/sub 2/, DT, T/sub 2/, and a tritium-free stream of HD for waste disposal.

  12. Hydrogen isotope separation

    DOEpatents

    Bartlit, John R.; Denton, William H.; Sherman, Robert H.

    1982-01-01

    A system of four cryogenic fractional distillation columns interlinked with two equilibrators for separating a DT and hydrogen feed stream into four product streams, consisting of a stream of high purity D.sub.2, DT, T.sub.2, and a tritium-free stream of HD for waste disposal.

  13. Separation of Powers.

    ERIC Educational Resources Information Center

    Bill of Rights in Action, 1987

    1987-01-01

    The dimensions of the separation of powers principle are explored through three lessons in the subject areas of U.S. history, U.S. government, and world history. In 1748, a French nobleman, Baron de Montesquieu, wrote a book called "The Spirit of the Laws," in which he argued that there could be no liberty when all government power was…

  14. Polymide gas separation membranes

    DOEpatents

    Ding, Yong; Bikson, Benjamin; Nelson, Joyce Katz

    2004-09-14

    Soluble polyamic acid salt (PAAS) precursors comprised of tertiary and quaternary amines, ammonium cations, sulfonium cations, or phosphonium cations, are prepared and fabricated into membranes that are subsequently imidized and converted into rigid-rod polyimide articles, such as membranes with desirable gas separation properties. A method of enhancing solubility of PAAS polymers in alcohols is also disclosed.

  15. Lunar Soil Particle Separator

    NASA Technical Reports Server (NTRS)

    Berggren, Mark

    2010-01-01

    The Lunar Soil Particle Separator (LSPS) beneficiates soil prior to in situ resource utilization (ISRU). It can improve ISRU oxygen yield by boosting the concentration of ilmenite, or other iron-oxide-bearing materials found in lunar soils, which can substantially reduce hydrogen reduction reactor size, as well as drastically decreasing the power input required for soil heating

  16. Separation and Attachment

    ERIC Educational Resources Information Center

    Honig, Alice Sterling

    2005-01-01

    Developing secure attachments with babies gives them a very special gift--the foundation for good infant mental health! In this article, the author discusses how to develop secure attachments with babies. Babies who are in the care of others during the day often suffer from separations from their special adults. Thirteen "tips" to ensure that…

  17. Alkaline battery, separator therefore

    NASA Technical Reports Server (NTRS)

    Schmidt, George F. (Inventor)

    1980-01-01

    An improved battery separator for alkaline battery cells has low resistance to electrolyte ion transfer and high resistance to electrode ion transfer. The separator is formed by applying an improved coating to an electrolyte absorber. The absorber, preferably, is a flexible, fibrous, and porous substrate that is resistant to strong alkali and oxidation. The coating composition includes an admixture of a polymeric binder, a hydrolyzable polymeric ester and inert fillers. The coating composition is substantially free of reactive fillers and plasticizers commonly employed as porosity promoting agents in separator coatings. When the separator is immersed in electrolyte, the polymeric ester of the film coating reacts with the electrolyte forming a salt and an alcohol. The alcohol goes into solution with the electrolyte while the salt imbibes electrolyte into the coating composition. When the salt is formed, it expands the polymeric chains of the binder to provide a film coating substantially permeable to electrolyte ion transfer but relatively impermeable to electrode ion transfer during use.

  18. Separable Representation of Nucleon-Nucleus Optical Potentials as Input to (d; p) Reaction Calculations

    NASA Astrophysics Data System (ADS)

    Hlophe, Linda D.

    The three-body description of deuteron-induced nuclear reactions requires the nucleon-nucleon (NN) and effective nucleon-nucleus interactions as input. The latter are given by Optical Model Potentials (OMPs), which are complex as well as energy-dependent. While a lot of effort has been dedicated to creating separable NN potentials, the same is not true for the nucleon-nucleus OMPs. In this work, separable representations of nucleon-nucleus OMPs are presented. To construct separable representations of neutron-nucleus OMPs, a scheme due to Ernst, Shakin, and Thaler (EST) is adopted as a starting point. It is shown that, by including both incoming and outgoing scattering states in the EST scheme, separable expansions for complex neutron-nucleus potentials that partially obey reciprocity are obtained. For the application to neutron-nucleus potentials that are complex as well as energy-dependent, a further generalization is carried out leading to an energy-dependent separable expansion that exactly fulfills reciprocity. By working exclusively with half-shell transition matrices in momentum space, the implementation of these separable representation schemes is straightforward. The proton-nucleus interaction consists of a short-ranged nuclear piece as well as the long-ranged point-Coulomb potential. After separating the point-Coulomb piece via the Gell-Mann-Goldberger relation, one is left with the short-ranged potential in the Coulomb basis. An extension of the separable representation schemes for neutron-nucleus OMPs to proton-nucleus systems thus requires scattering solutions in the Coulomb basis. This complicates a momentum space implementation of the aforementioned separable expansions. However, by employing the techniques first suggested by Elster, Liu, and Thaler, the separable representation schemes generalized for proton-nucleus OMPs are implemented in a similar manner to neutron-nucleus OMPs. Taking into account the internal structure of the nucleus leads to

  19. Modeling Students' Mathematics Using Steffe's Fraction Schemes

    ERIC Educational Resources Information Center

    Norton, Anderson H.; McCloskey, Andrea V.

    2008-01-01

    Each year, more teachers learn about the successful intervention program known as Math Recovery (USMRC 2008; Wright 2003). The program uses Steffe's whole-number schemes to model, understand, and support children's development of whole-number reasoning. Readers are probably less familiar with Steffe's fraction schemes, which have proven similarly…

  20. Finite volume renormalization scheme for fermionic operators

    SciTech Connect

    Monahan, Christopher; Orginos, Kostas

    2013-11-01

    We propose a new finite volume renormalization scheme. Our scheme is based on the Gradient Flow applied to both fermion and gauge fields and, much like the Schr\\"odinger functional method, allows for a nonperturbative determination of the scale dependence of operators using a step-scaling approach. We give some preliminary results for the pseudo-scalar density in the quenched approximation.

  1. Practical formulation of a positively conservative scheme

    NASA Astrophysics Data System (ADS)

    Obayashi, Shigeru; Wada, Yasuhiro

    1994-05-01

    Approximate Riemann solvers have been highly successful for computing the Euler/Navier-Stokes equations, but linearized Riemann solvers are known to fail occasionally by predicting non-physical states with negative density or internal energy. Positively conservative schemes, in contrast, guarantee physical solutions from realistic input. The Harten-Lax-van Leer-Einfeldt (HLLE) scheme is a typical example of a positively conservative scheme. However, the HLLE scheme is highly dissipative at contact discontinuities and shear layers and thus it is not applicable to practicle simulations. An existing modification to the HLLE scheme, known as HLLEM, enhances the resolution to that of the Roe scheme. However, this modification violates the positivity of density and internal energy. Precise derivation of the modification yields a quatratic inequality and thus requires a case-by-case treatment. This Note describes a new, modified HLLE scheme that satisfies the positively conservative condition approximately. Sample computationa are included to demonstrate the resolution and the robustness of the scheme.

  2. Eno-Osher schemes for Euler equations

    NASA Technical Reports Server (NTRS)

    Vandervegt, Jacobus J.

    1992-01-01

    The combination of the Osher approximate Riemann solver for the Euler equations and various ENO schemes is discussed for one-dimensional flow. The three basic approaches, viz. the ENO scheme using primitive variable reconstruction, either with Cauchy-Kowalewski procedure for time integration or the TVD Runge-Kutta scheme, and the flux-ENO method are tested on different shock tube cases. The shock tube cases were chosen to present a serious challenge to the ENO schemes in order to test their ability to capture flow discontinuities, such as shocks. Also the effect of the ordering of the eigen values, viz. natural or reversed ordering, in the Osher scheme is investigated. The ENO schemes are tested up to fifth order accuracy in space and time. The ENO-Osher scheme using the Cauchy-Kowalewski procedure for time integration is found to be the most accurate and robust compared with the other methods and is also computationally efficient. The tests showed that the ENO schemes perform reasonably well, but have problems in cases where two discontinuities are close together. In that case there are not enough points in the smooth part of the flow to create a non-oscillatory interpolation.

  3. Practical formulation of a positively conservative scheme

    NASA Technical Reports Server (NTRS)

    Obayashi, Shigeru; Wada, Yasuhiro

    1994-01-01

    Approximate Riemann solvers have been highly successful for computing the Euler/Navier-Stokes equations, but linearized Riemann solvers are known to fail occasionally by predicting non-physical states with negative density or internal energy. Positively conservative schemes, in contrast, guarantee physical solutions from realistic input. The Harten-Lax-van Leer-Einfeldt (HLLE) scheme is a typical example of a positively conservative scheme. However, the HLLE scheme is highly dissipative at contact discontinuities and shear layers and thus it is not applicable to practicle simulations. An existing modification to the HLLE scheme, known as HLLEM, enhances the resolution to that of the Roe scheme. However, this modification violates the positivity of density and internal energy. Precise derivation of the modification yields a quatratic inequality and thus requires a case-by-case treatment. This Note describes a new, modified HLLE scheme that satisfies the positively conservative condition approximately. Sample computationa are included to demonstrate the resolution and the robustness of the scheme.

  4. Phase calibration scheme for a ``T'' array

    NASA Astrophysics Data System (ADS)

    Ramesh, R.; Subramanian, K. R.; Sastry, Ch. V.

    1999-10-01

    A calibration scheme based on closure and redundancy techniques is described for correcting the phase errors in the complex visibilities observed with a T-shaped radio interferometer array. Practical details of the scheme are illustrated with reference to the Gauribidanur radioheliograph (GRH).

  5. A Resilient Quantum Secret Sharing Scheme

    NASA Astrophysics Data System (ADS)

    Maitra, Arpita; Paul, Goutam

    2015-02-01

    A resilient secret sharing scheme is supposed to generate the secret correctly even after some shares are damaged. In this paper, we show how quantum error correcting codes can be exploited to design a resilient quantum secret sharing scheme, where a quantum state is shared among more than one parties.

  6. On Space-Time Inversion Invariance and its Relation to Non-Dissipatedness of a CESE Core Scheme

    NASA Technical Reports Server (NTRS)

    Chang, Sin-Chung

    2006-01-01

    The core motivating ideas of the space-time CESE method are clearly presented and critically analyzed. It is explained why these ideas result in all the simplifying and enabling features of the CESE method. A thorough discussion of the a scheme, a two-level non-dissipative CESE solver of a simple advection equation with two independent mesh variables and two equations per mesh point is also presented. It is shown that the scheme possesses some rather intriguing properties such as: (i) its two independent mesh variables separately satisfy two decoupled three-level leapfrog schemes and (ii) it shares with the leapfrog scheme the same amplification factors, even though the a scheme and the leapfrog scheme have completely different origins and structures. It is also explained why the leapfrog scheme is not as robust as the a scheme. The amplification factors/matrices of several non-dissipative schemes are carefully studied and the key properties that contribute to their non-dissipatedness are clearly spelled out. Finally we define and establish space-time inversion (STI) invariance for several non-dissipative schemes and show that their non-dissipatedness is a result of their STI invariance.

  7. Exposure chamber

    DOEpatents

    Moss, Owen R.

    1980-01-01

    A chamber for exposing animals, plants, or materials to air containing gases or aerosols is so constructed that catch pans for animal excrement, for example, serve to aid the uniform distribution of air throughout the chamber instead of constituting obstacles as has been the case in prior animal exposure chambers. The chamber comprises the usual imperforate top, bottom and side walls. Within the chamber, cages and their associated pans are arranged in two columns. The pans are spaced horizontally from the walls of the chamber in all directions. Corresponding pans of the two columns are also spaced horizontally from each other. Preferably the pans of one column are also spaced vertically from corresponding pans of the other column. Air is introduced into the top of the chamber and withdrawn from the bottom. The general flow of air is therefore vertical. The effect of the horizontal pans is based on the fact that a gas flowing past the edge of a flat plate that is perpendicular to the flow forms a wave on the upstream side of the plate. Air flows downwardly between the chamber walls and the outer edges of the pan. It also flows downwardly between the inner edges of the pans of the two columns. It has been found that when the air carries aerosol particles, these particles are substantially uniformly distributed throughout the chamber.

  8. Separation science and technology

    SciTech Connect

    Smith, B.F.; Sauer, N.; Chamberlin, R.M.; Gottesfeld, S.; Mattes, B.R.; Li, D.Q.; Swanson, B.

    1998-12-31

    The focus of this project is the demonstration and advancement of membrane-based separation and destruction technologies. The authors are exploring development of membrane systems for gas separations, selective metal ion recovery, and for separation or destruction of hazardous organics. They evaluated existing polymers and polymer formulations for recovery of toxic oxyanionic metals such as chromate and arsenate from selected waste streams and developed second-generation water-soluble polymeric systems for highly selective oxyanion removal and recovery. They optimized the simultaneous removal of radioactive strontium and cesium from aqueous solutions using the new nonhazardous separations agents, and developed recyclable, redox-active extractants that permitted recovery of the radioactive ions into a minimal waste volume. They produced hollow fibers and fabricated prototype hollow-fiber membrane modules for applications to gas separations and the liquid-liquid extraction and recovery of actinides and nuclear materials from process streams. They developed and fabricated cyclodextrin-based microporous materials that selectively absorb organic compounds in an aqueous environment; the resultant products gave pure water with organics at less than 0.05 parts per billion. They developed new, more efficient, membrane-based electrochemical reactors for use in organic destruction in process waste treatment. They addressed the need for advanced oxidation technologies based on molecular-level materials designs that selectively remove or destroy target species. They prepared and characterized surface-modified TiO{sub 2} thin films using different linking approaches to attach ruthenium photosensitizers, and they started the measurement of the photo-degradation products generated using surface modified TiO{sub 2} films in reaction with chlorophenol.

  9. Localization scheme for relativistic spinors

    NASA Astrophysics Data System (ADS)

    Ciupka, J.; Hanrath, M.; Dolg, M.

    2011-12-01

    A new method to determine localized complex-valued one-electron functions in the occupied space is presented. The approach allows the calculation of localized orbitals regardless of their structure and of the entries in the spinor coefficient matrix, i.e., one-, two-, and four-component Kramers-restricted or unrestricted one-electron functions with real or complex expansion coefficients. The method is applicable to localization schemes that maximize (or minimize) a functional of the occupied spinors and that use a localization operator for which a matrix representation is available. The approach relies on the approximate joint diagonalization (AJD) of several Hermitian (symmetric) matrices which is utilized in electronic signal processing. The use of AJD in this approach has the advantage that it allows a reformulation of the localization criterion on an iterative 2 × 2 pair rotating basis in an analytical closed form which has not yet been described in the literature for multi-component (complex-valued) spinors. For the one-component case, the approach delivers the same Foster-Boys or Pipek-Mezey localized orbitals that one obtains from standard quantum chemical software, whereas in the multi-component case complex-valued spinors satisfying the selected localization criterion are obtained. These localized spinors allow the formulation of local correlation methods in a multi-component relativistic framework, which was not yet available. As an example, several heavy and super-heavy element systems are calculated using a Kramers-restricted self-consistent field and relativistic two-component pseudopotentials in order to investigate the effect of spin-orbit coupling on localization.

  10. Z‐Scheme Photocatalytic Systems for Promoting Photocatalytic Performance: Recent Progress and Future Challenges

    PubMed Central

    Li, Haijin; Tu, Wenguang

    2016-01-01

    Semiconductor photocatalysts have attracted increased attention due to their great potential for solving energy and environmental problems. The formation of Z‐scheme photocatalytic systems that mimic natural photosynthesis is a promising strategy to improve photocatalytic activity that is superior to single component photocatalysts. The connection between photosystem I (PS I) and photosystem II (PS II) are crucial for constructing efficient Z‐scheme photocatalytic systems using two photocatalysts (PS I and PS II). The present review concisely summarizes and highlights recent state‐of‐the‐art accomplishments of Z‐scheme photocatalytic systems with diverse connection modes, including i) with shuttle redox mediators, ii) without electron mediators, and iii) with solid‐state electron mediators, which effectively increase visible‐light absorption, promote the separation and transportation of photoinduced charge carriers, and thus enhance the photocatalytic efficiency. The challenges and prospects for future development of Z‐scheme photocatalytic systems are also presented. PMID:27980982

  11. Controls modelling and verification for the Pacific Intertie HVDC 4 terminal scheme

    SciTech Connect

    Hammad, A.; Minghetti, R.; Hasler, J.; Eicher, P. ); Bunch, R.; Goldsworthy, D. )

    1993-01-01

    A detailed digital model for the actual control system of the Pacific Intertie HVDC scheme is presented. The scheme is operated as multi-terminal bipole HVDC with four terminals in parallel. Each pole comprises two separately located converter station with independent converter controls at each end of the transmission line. The control model includes bipole, pole, station and converter control systems. Special control techniques for providing safe and stable operation of the parallel converters are described. The techniques also result in fast recovery of the HVDC transmission scheme following severe ac and dc system disturbances. Verification of the completeness and accuracy of the model are made using field tests made on the actual HVDC scheme.

  12. An efficient anonymous authentication scheme for wireless body area networks using elliptic curve cryptosystem.

    PubMed

    Zhao, Zhenguo

    2014-02-01

    With the development of wireless networks and medical sensors, wireless body area networks are playing more and more important role in the field of healthcare service. The data transmitted in WBANs is very sensitive since it will be used in clinical diagnoses or measurements. Therefore, security and privacy of communication in WBANs derive increasing attentions from the academia and industry. In this paper, we propose an identity (ID)-based efficient anonymous authentication scheme for WBANs using elliptic curve cryptosystem (ECC). Due to the ID-based concept, there is no certificate is needed in the proposed scheme. Moreover, the proposed scheme not only provides mutual authentication between the client and the application provider but also provides client anonymity. Performance analysis shows that improvements of 50.58% and 3.87% in the client side and the application provider side separately. Then the proposed scheme is more suitable for WBANs.

  13. The incremental unknowns-a multilevel scheme for the simulation of turbulent channel flows

    NASA Technical Reports Server (NTRS)

    Chen, M.; Choi, H.; Dubois, T.; Shen, J.; Temam, R.

    1996-01-01

    In numerical simulation of complex flows, it is important to identify different length scales of the flow and treat them differently. In this report, we introduce a new multilevel scheme for simulating turbulent channel flows. Two different versions of the scheme, namely the spectral and finite difference versions, are presented. The spectral version of the scheme is based on a spectral-Galerkin formulation which provides a natural decomposition of the flow into small and large wavelength parts, and which leads to linear systems that can be solved with quasi-optimal computational complexity. In the finite difference version, the Incremental Unknown (IU) is used to separate the length scales. Preliminary numerical results indicate that the scheme is well suited for turbulence computations and provides results which are comparable to that by Direct Numerical Simulation (DNS) but with significantly less CPU time.

  14. Runoff prediction using an integrated hybrid modelling scheme

    NASA Astrophysics Data System (ADS)

    Remesan, Renji; Shamim, Muhammad Ali; Han, Dawei; Mathew, Jimson

    2009-06-01

    SummaryRainfall runoff is a very complicated process due to its nonlinear and multidimensional dynamics, and hence difficult to model. There are several options for a modeller to consider, for example: the type of input data to be used, the length of model calibration (training) data and whether or not the input data be treated as signals with different frequency bands so that they can be modelled separately. This paper describes a new hybrid modelling scheme to answer the above mentioned questions. The proposed methodology is based on a hybrid model integrating wavelet transformation, a modelling engine (Artificial Neural Network) and the Gamma Test. First, the Gamma Test is used to decide the required input data dimensions and its length. Second, the wavelet transformation decomposes the input signals into different frequency bands. Finally, a modelling engine (ANN in this study) is used to model the decomposed signals separately. The proposed scheme was tested using the Brue catchment, Southwest England, as a case study and has produced very positive results. The hybrid model outperforms all other models tested. This study has a wider implication in the hydrological modelling field since its general framework could be applied to other model combinations (e.g., model engine could be Support Vector Machines, neuro-fuzzy systems, or even a conceptual model. The signal decomposition could be carried out by Fourier transformation).

  15. Large-eddy simulation/Reynolds-averaged Navier-Stokes hybrid schemes for high speed flows

    NASA Astrophysics Data System (ADS)

    Xiao, Xudong

    Three LES/RANS hybrid schemes have been proposed for the prediction of high speed separated flows. Each method couples the k-zeta (Enstrophy) BANS model with an LES subgrid scale one-equation model by using a blending function that is coordinate system independent. Two of these functions are based on turbulence dissipation length scale and grid size, while the third one has no explicit dependence on the grid. To implement the LES/RANS hybrid schemes, a new rescaling-reintroducing method is used to generate time-dependent turbulent inflow conditions. The hybrid schemes have been tested on a Mach 2.88 flow over 25 degree compression-expansion ramp and a Mach 2.79 flow over 20 degree compression ramp. A special computation procedure has been designed to prevent the separation zone from expanding upstream to the recycle-plane. The code is parallelized using Message Passing Interface (MPI) and is optimized for running on IBM-SP3 parallel machine. The scheme was validated first for a flat plate. It was shown that the blending function has to be monotonic to prevent the RANS region from appearing in the LES region. In the 25 deg ramp case, the hybrid schemes provided better agreement with experiment in the recovery region. Grid refinement studies demonstrated the importance of using a grid independent blend function and further improvement with experiment in the recovery region. In the 20 deg ramp case, with a relatively finer grid, the hybrid scheme characterized by grid independent blending function well predicted the flow field in both the separation region and the recovery region. Therefore, with "appropriately" fine grid, current hybrid schemes are promising for the simulation of shock wave/boundary layer interaction problems.

  16. A Novel Quantum Proxy Blind Signature Scheme

    NASA Astrophysics Data System (ADS)

    Guo, Wei; Xie, Shu-Cui; Zhang, Jian-Zhong

    2017-02-01

    A novel quantum proxy blind signature scheme is proposed. In this scheme, a special type of non-maximally entangled three-qubit state is introduced as a quantum channel, which can realize perfect teleportation. The message sender U blinds his message by means of preparing two groups of non-orthogonal single-photon states. According to the original signer Charlie's delegation message, the proxy signer Alice generates a corresponding signature. The arbitrator Trent can help the receiver Bob verify the signature, and also prevent Bob from doing any damage. The above-mentioned advantages make this scheme different from some existing schemes. It is showed that our scheme has the properties of undeniability, unforgeability, blindness, untraceability. Moreover, it is free from intercept-resend attack.

  17. A novel key management scheme using biometrics

    NASA Astrophysics Data System (ADS)

    Sui, Yan; Yang, Kai; Du, Yingzi; Orr, Scott; Zou, Xukai

    2010-04-01

    Key management is one of the most important issues in cryptographic systems. Several important challenges in such a context are represented by secure and efficient key generation, key distribution, as well as key revocation. Addressing such challenges requires a comprehensive solution which is robust, secure and efficient. Compared to traditional key management schemes, key management using biometrics requires the presence of the user, which can reduce fraud and protect the key better. In this paper, we propose a novel key management scheme using iris based biometrics. Our newly proposed scheme outperforms traditional key management schemes as well as some existing key-binding biometric schemes in terms of security, diversity and/or efficiency.

  18. The basic function scheme of polynomial type

    SciTech Connect

    WU, Wang-yi; Lin, Guang

    2009-12-01

    A new numerical method---Basic Function Method is proposed. This method can directly discrete differential operator on unstructured grids. By using the expansion of basic function to approach the exact function, the central and upwind schemes of derivative are constructed. By using the second-order polynomial as basic function and applying the technique of flux splitting method and the combination of central and upwind schemes to suppress the non-physical fluctuation near the shock wave, the second-order basic function scheme of polynomial type for solving inviscid compressible flow numerically is constructed in this paper. Several numerical results of many typical examples for two dimensional inviscid compressible transonic and supersonic steady flow illustrate that it is a new scheme with high accuracy and high resolution for shock wave. Especially, combining with the adaptive remeshing technique, the satisfactory results can be obtained by these schemes.

  19. A family of high-order targeted ENO schemes for compressible-fluid simulations

    NASA Astrophysics Data System (ADS)

    Fu, Lin; Hu, Xiangyu Y.; Adams, Nikolaus A.

    2016-01-01

    Although classical WENO schemes have achieved great success and are widely accepted, they exhibit several shortcomings. They are too dissipative for direct simulations of turbulence and lack robustness when very-high-order versions are applied to complex flows. In this paper, we propose a family of high-order targeted ENO schemes which are applicable for compressible-fluid simulations involving a wide range of flow scales. In order to increase the numerical robustness as compared to very-high-order classical WENO schemes, the reconstruction dynamically assembles a set of low-order candidate stencils with incrementally increasing width. While discontinuities and small-scale fluctuations are efficiently separated, the numerical dissipation is significantly diminished by an ENO-like stencil selection, which either applies a candidate stencil with its original linear weight, or removes its contribution when it is crossed by a discontinuity. The background linear scheme is optimized under the constraint of preserving an approximate dispersion-dissipation relation. By means of quasi-linear analyses and practical numerical experiments, a set of case-independent parameters is determined. The general formulation of arbitrarily high-order schemes is presented in a straightforward way. A variety of benchmark-test problems, including broadband waves, strong shock and contact discontinuities are studied. Compared to well-established classical WENO schemes, the present schemes exhibit significantly improved robustness, low numerical dissipation and sharp discontinuity capturing. They are particularly suitable for DNS and LES of shock-turbulence interactions.

  20. Workgroup report: base stations and wireless networks-radiofrequency (RF) exposures and health consequences.

    PubMed

    Valberg, Peter A; van Deventer, T Emilie; Repacholi, Michael H

    2007-03-01

    Radiofrequency (RF) waves have long been used for different types of information exchange via the air waves--wireless Morse code, radio, television, and wireless telephone (i.e., construction and operation of telephones or telephone systems). Increasingly larger numbers of people rely on mobile telephone technology, and health concerns about the associated RF exposure have been raised, particularly because the mobile phone handset operates in close proximity to the human body, and also because large numbers of base station antennas are required to provide widespread availability of service to large populations. The World Health Organization convened an expert workshop to discuss the current state of cellular-telephone health issues, and this article brings together several of the key points that were addressed. The possibility of RF health effects has been investigated in epidemiology studies of cellular telephone users and workers in RF occupations, in experiments with animals exposed to cell-phone RF, and via biophysical consideration of cell-phone RF electric-field intensity and the effect of RF modulation schemes. As summarized here, these separate avenues of scientific investigation provide little support for adverse health effects arising from RF exposure at levels below current international standards. Moreover, radio and television broadcast waves have exposed populations to RF for > 50 years with little evidence of deleterious health consequences. Despite unavoidable uncertainty, current scientific data are consistent with the conclusion that public exposures to permissible RF levels from mobile telephone and base stations are not likely to adversely affect human health.

  1. Workgroup Report: Base Stations and Wireless Networks—Radiofrequency (RF) Exposures and Health Consequences

    PubMed Central

    Valberg, Peter A.; van Deventer, T. Emilie; Repacholi, Michael H.

    2007-01-01

    Radiofrequency (RF) waves have long been used for different types of information exchange via the airwaves—wireless Morse code, radio, television, and wireless telephony (i.e., construction and operation of telephones or telephonic systems). Increasingly larger numbers of people rely on mobile telephone technology, and health concerns about the associated RF exposure have been raised, particularly because the mobile phone handset operates in close proximity to the human body, and also because large numbers of base station antennas are required to provide widespread availability of service to large populations. The World Health Organization convened an expert workshop to discuss the current state of cellular-telephone health issues, and this article brings together several of the key points that were addressed. The possibility of RF health effects has been investigated in epidemiology studies of cellular telephone users and workers in RF occupations, in experiments with animals exposed to cell-phone RF, and via biophysical consideration of cell-phone RF electric-field intensity and the effect of RF modulation schemes. As summarized here, these separate avenues of scientific investigation provide little support for adverse health effects arising from RF exposure at levels below current international standards. Moreover, radio and television broadcast waves have exposed populations to RF for > 50 years with little evidence of deleterious health consequences. Despite unavoidable uncertainty, current scientific data are consistent with the conclusion that public exposures to permissible RF levels from mobile telephony and base stations are not likely to adversely affect human health. PMID:17431492

  2. Microgravity Passive Phase Separator

    NASA Technical Reports Server (NTRS)

    Paragano, Matthew; Indoe, William; Darmetko, Jeffrey

    2012-01-01

    A new invention disclosure discusses a structure and process for separating gas from liquids in microgravity. The Microgravity Passive Phase Separator consists of two concentric, pleated, woven stainless- steel screens (25-micrometer nominal pore) with an axial inlet, and an annular outlet between both screens (see figure). Water enters at one end of the center screen at high velocity, eventually passing through the inner screen and out through the annular exit. As gas is introduced into the flow stream, the drag force exerted on the bubble pushes it downstream until flow stagnation or until it reaches an equilibrium point between the surface tension holding bubble to the screen and the drag force. Gas bubbles of a given size will form a front that is moved further down the length of the inner screen with increasing velocity. As more bubbles are added, the front location will remain fixed, but additional bubbles will move to the end of the unit, eventually coming to rest in the large cavity between the unit housing and the outer screen (storage area). Owing to the small size of the pores and the hydrophilic nature of the screen material, gas does not pass through the screen and is retained within the unit for emptying during ground processing. If debris is picked up on the screen, the area closest to the inlet will become clogged, so high-velocity flow will persist farther down the length of the center screen, pushing the bubble front further from the inlet of the inner screen. It is desired to keep the velocity high enough so that, for any bubble size, an area of clean screen exists between the bubbles and the debris. The primary benefits of this innovation are the lack of any need for additional power, strip gas, or location for venting the separated gas. As the unit contains no membrane, the transport fluid will not be lost due to evaporation in the process of gas separation. Separation is performed with relatively low pressure drop based on the large surface

  3. Improved photoelectrochemical performance of Z-scheme g-C3N4/Bi2O3/BiPO4 heterostructure and degradation property

    NASA Astrophysics Data System (ADS)

    Li, Junqi; Yuan, Huan; Zhu, Zhenfeng

    2016-11-01

    In g-C3N4/Bi2O3/BiPO4, the p-n junction between p-type Bi2O3 and n-type BiPO4 was encapsulated by g-C3N4 and a direct Z-scheme was built between g-C3N4 and Bi2O3. The optical, morphological and photoelectrochemical (PEC) properties of BiPO4, g-C3N4/BiPO4, Bi2O3/BiPO4 and g-C3N4/Bi2O3/BiPO4 hierarchical Z-scheme system were studied. More than 90% photodegradation of methyl orange (MO) with the exposure of simulated solar light was achieved within 160 min with the g-C3N4/Bi2O3/BiPO4, which displayed remarkably promoted photocatalytic activities than other samples. The electrochemical impedance spectra and photocurrent results also proved that efficient charge separation and better electron transport properties were achieved by g-C3N4/Bi2O3/BiPO4. In general, the addition of g-C3N4 can guide the residual electrons on p-type Bi2O3 to recombine with photoholes of g-C3N4 and make sure the left carries exhibit stronger oxidation and reduction ability to boost the production of active groups.

  4. Separation of Climate Signals

    SciTech Connect

    Kamath, C; Fodor, I

    2002-11-13

    Understanding changes in global climate is a challenging scientific problem. Simulated and observed data include signals from many sources, and untangling their respective effects is difficult. In order to make meaningful comparisons between different models, and to understand human effects on global climate, we need to isolate the effects of different sources. Recent eruptions of the El Chichon and Mt. Pinatubo volcanoes coincided with large El Nino and Southern Oscillation (ENSO) events, which complicates the separation of their contributions on global temperatures. Current approaches for separating volcano and ENSO signals in global mean data involve parametric models and iterative techniques [3]. We investigate alternative methods based on principal component analysis (PCA) [2] and independent component analysis (ICA) [1]. Our goal is to determine if such techniques can automatically identify the signals corresponding to the different sources, without relying on parametric models.

  5. Hydrocyclone separation hydrodynamics

    SciTech Connect

    Ivanov, A.A.; Ruzanov, S.R.; Lunyushkina, I.A.

    1987-10-20

    The lack of an adequate hydrodynamic model for a hydrocyclone has so far been the main obstacle to devising a general method for designing such apparatus. The authors present a method of calculating the liquid flow in the working zone. The results have been used to calculate the separating power in application to dilute suspensions. The Navier-Stokes equations and the equation of continuity are used in examining the behavior together with assumptions based on experiment: the conditions for stationary axisymmetric flow, constant turbulent viscosity, and a constant radial profile for the tangential low speed at all the heights. The boundary conditions are those for liquid slip at the side walls and absence of vortex drainage at the axis. The results enable one to choose the dimensions for particular separations.

  6. Tooth separation potential problems.

    PubMed

    Vishwanath, A E; Sharmada, B K; Pai, Sandesh S; Nandini, Nelvigi; Roopa, Tubaki

    2014-01-01

    A displaced orthodontic elastic separator was proposed as being the source of a gingival abscess that progresses to severe bone loss and exfoliation in a healthy adolescent patient with sound periodontal status prior to commencement of orthodontic treatment. After one year of undergoing orthodontic treatment, the patient presented with dull pain and mobility in the left upper permanent molar for which there was no apparent etiology. On clinical examination the patient had gingival inflammation, associated with a deep pocket and severe mobility (Grade III) in relation to the same teeth. Radiographic examination ofan Orthopantomogram (OPG) and IntraOral Periapical Radiograph (IOPAR) revealed a chronic periodontal abscess with severe necrosis of the periodontal ligament and severe alveolar bone loss. On curettage it was found that there was orthodontic elastic separator which was displaced sub gingivally. Active orthodontic forces were temporarily removed and splinting was done. 6 month follow up showed no mobility and significant improvement of alveolar bone height.

  7. Advanced Separation Consortium

    SciTech Connect

    2006-01-01

    The Center for Advanced Separation Technologies (CAST) was formed in 2001 under the sponsorship of the US Department of Energy to conduct fundamental research in advanced separation and to develop technologies that can be used to produce coal and minerals in an efficient and environmentally acceptable manner. The CAST consortium consists of seven universities - Virginia Tech, West Virginia University, University of Kentucky, Montana Tech, University of Utah, University of Nevada-Reno, and New Mexico Tech. The consortium brings together a broad range of expertise to solve problems facing the US coal industry and the mining sector in general. At present, a total of 60 research projects are under way. The article outlines some of these, on topics including innovative dewatering technologies, removal of mercury and other impurities, and modelling of the flotation process. 1 photo.

  8. Laser isotope separation

    DOEpatents

    Robinson, C.P.; Reed, J.J.; Cotter, T.P.; Boyer, K.; Greiner, N.R.

    1975-11-26

    A process and apparatus for separating isotopes by selective excitation of isotopic species of a volatile compound by tuned laser light is described. A highly cooled gas of the volatile compound is produced in which the isotopic shift is sharpened and defined. Before substantial condensation occurs, the cooled gas is irradiated with laser light precisely tuned to a desired wavelength to selectively excite a particular isotopic species in the cooled gas. The laser light may impart sufficient energy to the excited species to cause it to undergo photolysis, photochemical reaction or even to photoionize. Alternatively, a two-photon irradiation may be applied to the cooled gas to induce photolysis, photochemical reaction or photoionization. The process is particularly applicable to the separation of isotopes of uranium.

  9. Steam separator latch assembly

    DOEpatents

    Challberg, R.C.; Kobsa, I.R.

    1994-02-01

    A latch assembly removably joins a steam separator assembly to a support flange disposed at a top end of a tubular shroud in a nuclear reactor pressure vessel. The assembly includes an annular head having a central portion for supporting the steam separator assembly thereon, and an annular head flange extending around a perimeter thereof for supporting the head to the support flange. A plurality of latches are circumferentially spaced apart around the head flange with each latch having a top end, a latch hook at a bottom end thereof, and a pivot support disposed at an intermediate portion therebetween and pivotally joined to the head flange. The latches are pivoted about the pivot supports for selectively engaging and disengaging the latch hooks with the support flange for fixedly joining the head to the shroud or for allowing removal thereof. 12 figures.

  10. Steam separator latch assembly

    DOEpatents

    Challberg, Roy C.; Kobsa, Irvin R.

    1994-01-01

    A latch assembly removably joins a steam separator assembly to a support flange disposed at a top end of a tubular shroud in a nuclear reactor pressure vessel. The assembly includes an annular head having a central portion for supporting the steam separator assembly thereon, and an annular head flange extending around a perimeter thereof for supporting the head to the support flange. A plurality of latches are circumferentially spaced apart around the head flange with each latch having a top end, a latch hook at a bottom end thereof, and a pivot support disposed at an intermediate portion therebetween and pivotally joined to the head flange. The latches are pivoted about the pivot supports for selectively engaging and disengaging the latch hooks with the support flange for fixedly joining the head to the shroud or for allowing removal thereof.

  11. Nylon separators. [thermal degradation

    NASA Technical Reports Server (NTRS)

    Lim, H. S.

    1977-01-01

    A nylon separator was placed in a flooded condition in K0H solution and heated at various high temperatures ranging from 60 C to 110 C. The weight decrease was measured and the molecular weight and decomposition product were analyzed to determine: (1) the effect of K0H concentration on the hydrolysis rate; (2) the effect of K0H concentration on nylon degradation; (3) the activation energy at different K0H concentrations; and (4) the effect of oxygen on nylon degradation. The nylon hydrolysis rate is shown to increase as K0H concentration is decreased 34%, giving a maximum rate at about 16%. Separator hydrolysis is confirmed by molecular weight decrease in age of the batteries, and the reaction of nylon with molecular oxygen is probably negligible, compared to hydrolysis. The extrapolated rate value from the high temperature experiment correlates well with experimental values at 35 degrees.

  12. Laser isotope separation

    DOEpatents

    Robinson, C. Paul; Jensen, Reed J.; Cotter, Theodore P.; Boyer, Keith; Greiner, Norman R.

    1988-01-01

    A process and apparatus for separating isotopes by selective excitation of isotopic species of a volatile compound by tuned laser light. A highly cooled gas of the volatile compound is produced in which the isotopic shift is sharpened and defined. Before substantial condensation occurs, the cooled gas is irradiated with laser light precisely tuned to a desired wavelength to selectively excite a particular isotopic species in the cooled gas. The laser light may impart sufficient energy to the excited species to cause it to undergo photolysis, photochemical reaction or even to photoionize. Alternatively, a two-photon irradiation may be applied to the cooled gas to induce photolysis, photochemical reaction or photoionization. The process is particularly applicable to the separation of isotopes of uranium.

  13. Photochemical isotope separation

    DOEpatents

    Robinson, C. Paul; Jensen, Reed J.; Cotter, Theodore P.; Greiner, Norman R.; Boyer, Keith

    1987-01-01

    A process for separating isotopes by selective excitation of isotopic species of a volatile compound by tuned laser light. A highly cooled gas of the volatile compound is produced in which the isotopic shift is sharpened and defined. Before substantial condensation occurs, the cooled gas is irradiated with laser light precisely tuned to a desired wavelength to selectively excite a particular isotopic species in the cooled gas. The laser light may impart sufficient energy to the excited species to cause it to undergo photochemical reaction or even to photoionize. Alternatively, a two-photon irradiation may be applied to the cooled gas to induce photochemical reaction or photoionization. The process is particularly applicable to the separation of isotopes of uranium and plutonium.

  14. Theory of electrophoretic separations. II - Construction of a numerical simulation scheme and its applications

    NASA Technical Reports Server (NTRS)

    Palusinski, O. A.; Graham, A.; Mosher, R. A.; Bier, M.; Saville, D. A.

    1986-01-01

    The implementation of a previously derived model describing electrophoretic transport processes is reformulated, and its usefulness is demonstrated by simulating moving boundary electrophoresis and isoelectric focusing with immobilized species. The resulting solution is stable, evolves smoothly when suitable small step sizes are used, and has a loosely defined convergence as the step sizes are made smaller. The major computational problem involves a need to use small spatial step sizes at high current levels.

  15. Towards a genuinely multi-dimensional upwind scheme

    NASA Technical Reports Server (NTRS)

    Powell, Kenneth G.; Vanleer, Bram; Roe, Philip L.

    1990-01-01

    Methods of incorporating multi-dimensional ideas into algorithms for the solution of Euler equations are presented. Three schemes are developed and tested: a scheme based on a downwind distribution, a scheme based on a rotated Riemann solver and a scheme based on a generalized Riemann solver. The schemes show an improvement over first-order, grid-aligned upwind schemes, but the higher-order performance is less impressive. An outlook for the future of multi-dimensional upwind schemes is given.

  16. METHOD OF SEPARATING PLUTONIUM

    DOEpatents

    Heal, H.G.

    1960-02-16

    BS>A method of separating plutonium from aqueous nitrate solutions of plutonium, uranium. and high beta activity fission products is given. The pH of the aqueous solution is adjusted between 3.0 to 6.0 with ammonium acetate, ferric nitrate is added, and the solution is heated to 80 to 100 deg C to selectively form a basic ferric plutonium-carrying precipitate.

  17. Acromioclavicular Joint Separations

    DTIC Science & Technology

    2013-01-01

    non-surgical measures, high-grade inju- ries frequently warrant surgical intervention to minimize pain and maximize shoulder function. Factors such as...sports [1–3]. While most injuries can be managed non-operatively, high-grade separations may result in per- sistent pain or functional decline and...joint pathology (cross arm adduction and loading of the AC joint) can be helpful to localize shoulder pain to the AC joint. These tests are especial- ly

  18. Enlisted Administrative Separations

    DTIC Science & Technology

    1993-12-21

    1 16. Sexual Orientation . A sexual attraction to individuals of a particular sex. 17. Show-Cause Authority. Any of the following as determined by the...homosexual acts is grounds for separation not because it reflects the member’s sexual orientation , but because the statement indicates a likelihood that the...member engages in or will engage in homosexual acts. Sexual orientation is considered a personal and private matter, and homosexual orientation is not

  19. URANIUM SEPARATION PROCESS

    DOEpatents

    Lyon, W.L.

    1962-04-17

    A method of separating uranium oxides from PuO/sub 2/, ThO/sub 2/, and other actinide oxides is described. The oxide mixture is suspended in a fused salt melt and a chlorinating agent such as chlorine gas or phosgene is sparged through the suspension. Uranium oxides are selectively chlorinated and dissolve in the melt, which may then be filtered to remove the unchlorinated oxides of the other actinides. (AEC)

  20. SEPARATION OF PLUTONYL IONS

    DOEpatents

    Connick, R.E.; McVey, Wm.H.

    1958-07-15

    A process is described for separating plutonyl ions from the acetate ions with which they are associated in certaln carrier precipitation methods of concentrating plutonium. The method consists in adding alkaline earth metal ions and subsequently alkalizing the solution, causing formation of an alkaltne earth plutonate precipitate. Barium hydroxide is used in a preferred embodiment since it provides alkaline earth metal ion and alkalizes the solution in one step forming insoluble barium platonate.

  1. Membrane separation of hydrocarbons

    DOEpatents

    Funk, Edward W.; Kulkarni, Sudhir S.; Chang, Y. Alice

    1986-01-01

    Mixtures of heavy oils and light hydrocarbons may be separated by passing the mixture over a polymeric membrane which comprises a polymer capable of maintaining its integrity in the presence of hydrocarbon compounds at temperature ranging from about ambient to about 100.degree. C. and pressures ranging from about 50 to about 1000 psi. The membranes which possess pore sizes ranging from about 10 to about 500 Angstroms are cast from a solvent solution and recovered.

  2. ISOTOPE SEPARATING APPARATUS CONTROL

    DOEpatents

    Barnes, S.W.

    1959-08-25

    An improved isotope separating apparatus of the electromagnetic type, commonly referred to as a calutron, is described. Improvements in detecting and maintaining optimum position and focus of the ion beam are given. The calutron collector is provided with an additional electrode insulated from and positioned between the collecting pockets. The ion beams are properly positioned and focused until the deionizing current which flows from ground to this additional electrode ts a minimum.

  3. Color separation gratings

    NASA Technical Reports Server (NTRS)

    Farn, Michael W.; Knowlden, Robert E.

    1993-01-01

    In this paper, we describe the theory, fabrication and test of a binary optics 'echelon'. The echelon is a grating structure which separates electromagnetic radiation of different wavelengths, but it does so according to diffraction order rather than by dispersion within one diffraction order, as is the case with conventional gratings. A prototype echelon, designed for the visible spectrum, is fabricated using the binary optics process. Tests of the prototype show good agreement with theoretical predictions.

  4. Separation of sulfur isotopes

    DOEpatents

    DeWitt, Robert; Jepson, Bernhart E.; Schwind, Roger A.

    1976-06-22

    Sulfur isotopes are continuously separated and enriched using a closed loop reflux system wherein sulfur dioxide (SO.sub.2) is reacted with sodium hydroxide (NaOH) or the like to form sodium hydrogen sulfite (NaHSO.sub.3). Heavier sulfur isotopes are preferentially attracted to the NaHSO.sub.3, and subsequently reacted with sulfuric acid (H.sub.2 SO.sub.4) forming sodium hydrogen sulfate (NaHSO.sub.4) and SO.sub.2 gas which contains increased concentrations of the heavier sulfur isotopes. This heavy isotope enriched SO.sub.2 gas is subsequently separated and the NaHSO.sub.4 is reacted with NaOH to form sodium sulfate (Na.sub.2 SO.sub.4) which is subsequently decomposed in an electrodialysis unit to form the NaOH and H.sub.2 SO.sub.4 components which are used in the aforesaid reactions thereby effecting sulfur isotope separation and enrichment without objectionable loss of feed materials.

  5. Innovative Separations Technologies

    SciTech Connect

    J. Tripp; N. Soelberg; R. Wigeland

    2011-05-01

    Reprocessing used nuclear fuel (UNF) is a multi-faceted problem involving chemistry, material properties, and engineering. Technology options are available to meet a variety of processing goals. A decision about which reprocessing method is best depends significantly on the process attributes considered to be a priority. New methods of reprocessing that could provide advantages over the aqueous Plutonium Uranium Reduction Extraction (PUREX) and Uranium Extraction + (UREX+) processes, electrochemical, and other approaches are under investigation in the Fuel Cycle Research and Development (FCR&D) Separations Campaign. In an attempt to develop a revolutionary approach to UNF recycle that may have more favorable characteristics than existing technologies, five innovative separations projects have been initiated. These include: (1) Nitrogen Trifluoride for UNF Processing; (2) Reactive Fluoride Gas (SF6) for UNF Processing; (3) Dry Head-end Nitration Processing; (4) Chlorination Processing of UNF; and (5) Enhanced Oxidation/Chlorination Processing of UNF. This report provides a description of the proposed processes, explores how they fit into the Modified Open Cycle (MOC) and Full Recycle (FR) fuel cycles, and identifies performance differences when compared to 'reference' advanced aqueous and fluoride volatility separations cases. To be able to highlight the key changes to the reference case, general background on advanced aqueous solvent extraction, advanced oxidative processes (e.g., volumetric oxidation, or 'voloxidation,' which is high temperature reaction of oxide UNF with oxygen, or modified using other oxidizing and reducing gases), and fluorination and chlorination processes is provided.

  6. Apparatus for electrophoresis separation

    DOEpatents

    Anderson, Norman L.

    1978-01-01

    An apparatus is disclosed for simultaneously performing electrophoresis separations on a plurality of slab gels containing samples of protein, protein subunits or nucleic acids. A reservoir of buffer solution is divided into three compartments by two parallel partitions having vertical slots spaced along their length. A sheet of flexible, electrically insulative material is attached to each partition and is provided with vertical slits aligned with the slots. Slab-gel holders are received within the slots with the flexible material folded outwardly as flaps from the slits to overlay portions of the holder surfaces and thereby act as electrical and liquid seals. An elongated, spaghetti-like gel containing a sample of specimen that was previously separated by isoelectric focusing techniques is vertically positioned along a marginal edge portion of the slab gel. On application of an electrical potential between the two outer chambers of buffer solution, a second dimensional electrophoresis separation in accordance with molecular weight occurs as the specimen molecules migrate across the slab gel.

  7. Airborne rotary separator study

    NASA Technical Reports Server (NTRS)

    Drnevich, R. F.; Nowobilski, J. J.

    1992-01-01

    Several air breathing propulsion concepts for future earth-to-orbit transport vehicles utilize air collection and enrichment, and subsequent storage of liquid oxygen for later use in the vehicle mission. Work performed during the 1960's established the feasibility of substantially reducing weight and volume of a distillation type air separator system by operating the distillation elements in high 'g' fields obtained by rotating the separator assembly. The purpose of this study was to evaluate various fuels and fuel combinations with the objective of minimizing the weight and increase the ready alert capability of the plane. Fuels will be used to provide energy as well as act as heat sinks for the on-board heat rejection system. Fuel energy was used to provide power for air separation as well as to produce refrigeration for liquefaction of oxygen enriched air, besides its primary purpose of vehicle propulsion. The heat generated in the cycle was rejected to the fuel and water which is also carried on board the vehicle.The fuels that were evaluated include JP4, methane, and hydrogen. Hydrogen served as a comparison to the JP4 and methane cases.

  8. A Real Quantum Designated Verifier Signature Scheme

    NASA Astrophysics Data System (ADS)

    Shi, Wei-Min; Zhou, Yi-Hua; Yang, Yu-Guang

    2015-09-01

    The effectiveness of most quantum signature schemes reported in the literature can be verified by a designated person, however, those quantum signature schemes aren't the real traditional designated verifier signature schemes, because the designated person hasn't the capability to efficiently simulate a signature which is indistinguishable from a signer, which cannot satisfy the requirements in some special environments such as E-voting, call for tenders and software licensing. For solving this problem, a real quantum designated verifier signature scheme is proposed in this paper. According to the property of unitary transformation and quantum one-way function, only a verifier designated by a signer can verify the "validity of a signature" and the designated verifier cannot prove to a third party that the signature was produced by the signer or by himself through a transcript simulation algorithm. Moreover, the quantum key distribution and quantum encryption algorithm guarantee the unconditional security of this scheme. Analysis results show that this new scheme satisfies the main security requirements of designated verifier signature scheme and the major attack strategies.

  9. Symmetric weak ternary quantum homomorphic encryption schemes

    NASA Astrophysics Data System (ADS)

    Wang, Yuqi; She, Kun; Luo, Qingbin; Yang, Fan; Zhao, Chao

    2016-03-01

    Based on a ternary quantum logic circuit, four symmetric weak ternary quantum homomorphic encryption (QHE) schemes were proposed. First, for a one-qutrit rotation gate, a QHE scheme was constructed. Second, in view of the synthesis of a general 3 × 3 unitary transformation, another one-qutrit QHE scheme was proposed. Third, according to the one-qutrit scheme, the two-qutrit QHE scheme about generalized controlled X (GCX(m,n)) gate was constructed and further generalized to the n-qutrit unitary matrix case. Finally, the security of these schemes was analyzed in two respects. It can be concluded that the attacker can correctly guess the encryption key with a maximum probability pk = 1/33n, thus it can better protect the privacy of users’ data. Moreover, these schemes can be well integrated into the future quantum remote server architecture, and thus the computational security of the users’ private quantum information can be well protected in a distributed computing environment.

  10. Towards an "All Speed" Unstructured Upwind Scheme

    NASA Technical Reports Server (NTRS)

    Loh, Ching Y.; Jorgenson, Philip C.E.

    2009-01-01

    In the authors previous studies [1], a time-accurate, upwind finite volume method (ETAU scheme) for computing compressible flows on unstructured grids was proposed. The scheme is second order accurate in space and time and yields high resolution in the presence of discontinuities. The scheme features a multidimensional limiter and multidimensional numerical dissipation. These help to stabilize the numerical process and to overcome the annoying pathological behaviors of upwind schemes. In the present paper, it will be further shown that such multidimensional treatments also lead to a nearly all-speed or Mach number insensitive upwind scheme. For flows at very high Mach number, e.g., 10, local numerical instabilities or the pathological behaviors are suppressed, while for flows at very low Mach number, e.g., 0.02, computation can be directly carried out without invoking preconditioning. For flows in different Mach number regimes, i.e., low, medium, and high Mach numbers, one only needs to adjust one or two parameters in the scheme. Several examples with low and high Mach numbers are demonstrated in this paper. Thus, the ETAU scheme is applicable to a broad spectrum of flow regimes ranging from high supersonic to low subsonic, appropriate for both CFD (computational fluid dynamics) and CAA (computational aeroacoustics).

  11. A Spatial Domain Quantum Watermarking Scheme

    NASA Astrophysics Data System (ADS)

    Wei, Zhan-Hong; Chen, Xiu-Bo; Xu, Shu-Jiang; Niu, Xin-Xin; Yang, Yi-Xian

    2016-07-01

    This paper presents a spatial domain quantum watermarking scheme. For a quantum watermarking scheme, a feasible quantum circuit is a key to achieve it. This paper gives a feasible quantum circuit for the presented scheme. In order to give the quantum circuit, a new quantum multi-control rotation gate, which can be achieved with quantum basic gates, is designed. With this quantum circuit, our scheme can arbitrarily control the embedding position of watermark images on carrier images with the aid of auxiliary qubits. Besides reversely acting the given quantum circuit, the paper gives another watermark extracting algorithm based on quantum measurements. Moreover, this paper also gives a new quantum image scrambling method and its quantum circuit. Differ from other quantum watermarking schemes, all given quantum circuits can be implemented with basic quantum gates. Moreover, the scheme is a spatial domain watermarking scheme, and is not based on any transform algorithm on quantum images. Meanwhile, it can make sure the watermark be secure even though the watermark has been found. With the given quantum circuit, this paper implements simulation experiments for the presented scheme. The experimental result shows that the scheme does well in the visual quality and the embedding capacity. Supported by the National Natural Science Foundation of China under Grant Nos. 61272514, 61170272, 61373131, 61121061, 61411146001, the program for New Century Excellent Talents under Grant No. NCET-13-0681, the National Development Foundation for Cryptological Research (Grant No. MMJJ201401012) and the Fok Ying Tung Education Foundation under Grant No. 131067, and the Shandong Provincial Natural Science Foundation of China under Grant No. ZR2013FM025

  12. Prediction of fluctuating pressure environments associated with plume-induced separated flow fields

    NASA Technical Reports Server (NTRS)

    Plotkin, K. J.

    1973-01-01

    The separated flow environment induced by underexpanded rocket plumes during boost phase of rocket vehicles has been investigated. A simple semi-empirical model for predicting the extent of separation was developed. This model offers considerable computational economy as compared to other schemes reported in the literature, and has been shown to be in good agreement with limited flight data. The unsteady pressure field in plume-induced separated regions was investigated. It was found that fluctuations differed from those for a rigid flare only at low frequencies. The major difference between plume-induced separation and flare-induced separation was shown to be an increase in shock oscillation distance for the plume case. The prediction schemes were applied to PRR shuttle launch configuration. It was found that fluctuating pressures from plume-induced separation are not as severe as for other fluctuating environments at the critical flight condition of maximum dynamic pressure.

  13. Chaotic cryptographic scheme and its randomness evaluation

    NASA Astrophysics Data System (ADS)

    Stoyanov, B. P.

    2012-10-01

    We propose a new cryptographic scheme based on the Lorenz chaos attractor and 32 bit bent Boolean function. We evaluated the keystream generated by the scheme with batteries of the NIST statistical tests. We also applied a number of statistical analysis techniques, such as calculating histograms, correlations between two adjacent pixels, information entropy, and differential resistance, all refer to images encrypted by the proposed system. The results of the analysis show that the new cryptographic scheme ensures a secure way for sending digital data with potential applications in real-time image encryption.

  14. Finite-volume scheme for anisotropic diffusion

    SciTech Connect

    Es, Bram van; Koren, Barry; Blank, Hugo J. de

    2016-02-01

    In this paper, we apply a special finite-volume scheme, limited to smooth temperature distributions and Cartesian grids, to test the importance of connectivity of the finite volumes. The area of application is nuclear fusion plasma with field line aligned temperature gradients and extreme anisotropy. We apply the scheme to the anisotropic heat-conduction equation, and compare its results with those of existing finite-volume schemes for anisotropic diffusion. Also, we introduce a general model adaptation of the steady diffusion equation for extremely anisotropic diffusion problems with closed field lines.

  15. The Overseas Doctors Training Scheme: failing expectations.

    PubMed Central

    Richards, T.

    1994-01-01

    The Overseas Doctors Training Scheme needs appraisal. Set up 10 years ago to improve the quality of postgraduate training that overseas (non-European) doctors receive in Britain, the scheme has been popular, but it is questionable how far it has achieved its aims. If Britain is to continue to employ large numbers of overseas doctors in training grades, both through the scheme and through independent arrangements, the apparent mismatch between their expectations and the reality of what Britain offers must be tackled. Images p1629-a PMID:7993422

  16. The GEMPAK Barnes objective analysis scheme

    NASA Technical Reports Server (NTRS)

    Koch, S. E.; Desjardins, M.; Kocin, P. J.

    1981-01-01

    GEMPAK, an interactive computer software system developed for the purpose of assimilating, analyzing, and displaying various conventional and satellite meteorological data types is discussed. The objective map analysis scheme possesses certain characteristics that allowed it to be adapted to meet the analysis needs GEMPAK. Those characteristics and the specific adaptation of the scheme to GEMPAK are described. A step-by-step guide for using the GEMPAK Barnes scheme on an interactive computer (in real time) to analyze various types of meteorological datasets is also presented.

  17. A diagonally inverted LU implicit multigrid scheme

    NASA Technical Reports Server (NTRS)

    Yokota, Jeffrey W.; Caughey, David A.; Chima, Rodrick V.

    1988-01-01

    A new Diagonally Inverted LU Implicit scheme is developed within the framework of the multigrid method for the 3-D unsteady Euler equations. The matrix systems that are to be inverted in the LU scheme are treated by local diagonalizing transformations that decouple them into systems of scalar equations. Unlike the Diagonalized ADI method, the time accuracy of the LU scheme is not reduced since the diagonalization procedure does not destroy time conservation. Even more importantly, this diagonalization significantly reduces the computational effort required to solve the LU approximation and therefore transforms it into a more efficient method of numerically solving the 3-D Euler equations.

  18. A classification scheme for chimera states

    NASA Astrophysics Data System (ADS)

    Kemeth, Felix P.; Haugland, Sindre W.; Schmidt, Lennart; Kevrekidis, Ioannis G.; Krischer, Katharina

    2016-09-01

    We present a universal characterization scheme for chimera states applicable to both numerical and experimental data sets. The scheme is based on two correlation measures that enable a meaningful definition of chimera states as well as their classification into three categories: stationary, turbulent, and breathing. In addition, these categories can be further subdivided according to the time-stationarity of these two measures. We demonstrate that this approach is both consistent with previously recognized chimera states and enables us to classify states as chimeras which have not been categorized as such before. Furthermore, the scheme allows for a qualitative and quantitative comparison of experimental chimeras with chimeras obtained through numerical simulations.

  19. Galilean invariant resummation schemes of cosmological perturbations

    NASA Astrophysics Data System (ADS)

    Peloso, Marco; Pietroni, Massimo

    2017-01-01

    Many of the methods proposed so far to go beyond Standard Perturbation Theory break invariance under time-dependent boosts (denoted here as extended Galilean Invariance, or GI). This gives rise to spurious large scale effects which spoil the small scale predictions of these approximation schemes. By using consistency relations we derive fully non-perturbative constraints that GI imposes on correlation functions. We then introduce a method to quantify the amount of GI breaking of a given scheme, and to correct it by properly tailored counterterms. Finally, we formulate resummation schemes which are manifestly GI, discuss their general features, and implement them in the so called Time-Flow, or TRG, equations.

  20. A concatenated coding scheme for error control

    NASA Technical Reports Server (NTRS)

    Lin, S.

    1985-01-01

    A concatenated coding scheme for error contol in data communications was analyzed. The inner code is used for both error correction and detection, however the outer code is used only for error detection. A retransmission is requested if either the inner code decoder fails to make a successful decoding or the outer code decoder detects the presence of errors after the inner code decoding. Probability of undetected error of the proposed scheme is derived. An efficient method for computing this probability is presented. Throughout efficiency of the proposed error control scheme incorporated with a selective repeat ARQ retransmission strategy is analyzed.

  1. Performance assessment of three convective parameterization schemes in WRF for downscaling summer rainfall over South Africa

    NASA Astrophysics Data System (ADS)

    Ratna, Satyaban B.; Ratnam, J. V.; Behera, S. K.; Rautenbach, C. J. deW.; Ndarana, T.; Takahashi, K.; Yamagata, T.

    2014-06-01

    Austral summer rainfall over the period 1991/1992 to 2010/2011 was dynamically downscaled by the weather research and forecasting (WRF) model at 9 km resolution for South Africa. Lateral boundary conditions for WRF were provided from the European Centre for medium-range weather (ECMWF) reanalysis (ERA) interim data. The model biases for the rainfall were evaluated over the South Africa as a whole and its nine provinces separately by employing three different convective parameterization schemes, namely the (1) Kain-Fritsch (KF), (2) Betts-Miller-Janjic (BMJ) and (3) Grell-Devenyi ensemble (GDE) schemes. All three schemes have generated positive rainfall biases over South Africa, with the KF scheme producing the largest biases and mean absolute errors. Only the BMJ scheme could reproduce the intensity of rainfall anomalies, and also exhibited the highest correlation with observed interannual summer rainfall variability. In the KF scheme, a significantly high amount of moisture was transported from the tropics into South Africa. The vertical thermodynamic profiles show that the KF scheme has caused low level moisture convergence, due to the highly unstable atmosphere, and hence contributed to the widespread positive biases of rainfall. The negative bias in moisture, along with a stable atmosphere and negative biases of vertical velocity simulated by the GDE scheme resulted in negative rainfall biases, especially over the Limpopo Province. In terms of rain rate, the KF scheme generated the lowest number of low rain rates and the maximum number of moderate to high rain rates associated with more convective unstable environment. KF and GDE schemes overestimated the convective rain and underestimated the stratiform rain. However, the simulated convective and stratiform rain with BMJ scheme is in more agreement with the observations. This study also documents the performance of regional model in downscaling the large scale climate mode such as El Niño Southern Oscillation

  2. Signal processing schemes for optical voltage transducer

    NASA Astrophysics Data System (ADS)

    Chen, Jinling; Xie, Delin; Chen, Hongbin; Xie, Latang; Song, Jianhe; Luo, Xiaoni

    2006-02-01

    This paper describes an optical voltage transducer(OVT) for a 35kV system based on Pockels effect in a BGO(Bi 4Ge 3O 12) crystal. OVT used to measure the voltage of power are superior to conventional electromagnet-induced voltage transducer in many aspects, thus it has great potential to applications. It has some advantages. These advantages are: 1)Optics provides total galvanic separation between the measuring point at high voltage (HV) potential and the measuring equipment at ground potential. 2)Transmission of measuring signals in optical fibers is immune to induced electromagnetic noise even in EMI-environment of switchyards and other high voltage installations. 3)Optics and especially optical fibers make the insulation costs independent of voltage levels thus giving an economical advantage at voltage levels above 100kV. 4)The use of optics is expected to reduce the weight of the transducers. 5)Optical transducers are expected to have a large bandwidth than conventional transducers. 6)The output-signals from an optical transducer are easily interfaced with computers and electronically operated equipment such as digital relays. New techniques developed in electronics and optical field including fiber optic technology bring new contributions to the measurement of voltage and electric field. A Pockels voltage sensor has been widely introduced to electrical power transmission and distribution systems and some advantage of the optical voltage measuring techniques are reported. In this paper, a brief summary of electro-optic effects and the principle of OVT is proposed. The signal processing schemes of different optical path and features are analyzed. The basic principle of OVT is to modulate the irradiance of the light-directed to OVT by an optical fiber-according to the potential difference between the HV-line and the ground potential. The modulation of the light is accomplished by placing a material-that has an optical property (the birefringence), which is

  3. NIOBIUM-TANTALUM SEPARATION

    DOEpatents

    Wilhelm, H.A.; Foos, R.A.

    1959-01-27

    The usual method for the separation of tantalum and niobium consists of a selective solvent extraction from an aqueous hydrofluoric acid solution of the metals. A difficulty encountered in this process is the fact that the corrosion problems associated with hydrofluoric acid are serious. It has been found that the corrosion caused by the hydrofluoric acid may be substantially reduced by adding to the acidic solution an amine, such as phenyl diethanolamine or aniline, and adjusting pH value to between 4 and 6.

  4. Cyclic membrane separation process

    DOEpatents

    Bowser, John

    2004-04-13

    A cyclic process for controlling environmental emissions of volatile organic compounds (VOC) from vapor recovery in storage and dispensing operations of liquids maintains a vacuum in the storage tank ullage. In one of a two-part cyclic process ullage vapor is discharged through a vapor recovery system in which VOC are stripped from vented gas with a selectively gas permeable membrane. In the other part, the membrane is inoperative while gas pressure rises in the ullage. Ambient air is charged to the membrane separation unit during the latter part of the cycle.

  5. Cyclic membrane separation process

    DOEpatents

    Nemser, Stuart M.

    2005-05-03

    A cyclic process for controlling environmental emissions of volatile organic compounds (VOC) from vapor recovery in storage and dispensing operations of liquids maintains a vacuum in the storage tank ullage. In the first part of a two-part cyclic process ullage vapor is discharged through a vapor recovery system in which VOC are stripped from vented gas with a selectively gas permeable membrane. In the second part, the membrane is inoperative while gas pressure rises in the ullage. In one aspect of this invention, a vacuum is drawn in the membrane separation unit thus reducing overall VOC emissions.

  6. POLONIUM SEPARATION PROCESS

    DOEpatents

    Karraker, D.G.

    1959-07-14

    A liquid-liquid extraction process is presented for the recovery of polonium from lead and bismuth. According to the invention an acidic aqueous chloride phase containing the polonium, lead, and bismuth values is contacted with a tributyl phosphate ether phase. The polonium preferentially enters the organic phase which is then separated and washed with an aqueous hydrochloric solution to remove any lead or bismuth which may also have been extracted. The now highly purified polonium in the organic phase may be transferred to an aqueous solution by extraction with aqueous nitric acid.

  7. Membrane separation processes

    SciTech Connect

    Rautenbach, R.; Albrecht, R.

    1989-01-01

    The success of two membrane processes, reverse osmosis and ultrafiltration, has helped make membrane processes a central technique in solving separation problems for fluid systems. This book discusses the various applications and developments in membrane technology and shows how accurate membrane processes can be designed. Starting with the local transport phenomena, the behavior of individual elements such as tube or plate membrane and the behavior of the technical unit - the module - are discussed in detail. The book goes on to demonstrate the most effective ways of arranging modules for forming an optimal plant.

  8. Medical Separation Among Careerists

    DTIC Science & Technology

    2013-03-01

    Ammunition6and6Explosive6Ordnance6Disposal Logistics+Combat+Element 01XX Personnel6&6Administration 02XX Intelligence 04XX Logistics 05XX Plans 06XX/25XX/40XX...INSIDE$US3DISEASE INVOL$DIS$( PARENTHOOD $OR$CUSTODY$OF$MIN TERM3SPECIAL$ENL$PROG$INITIAL$PERIOD$AC VOL$DIS$(ACC$COMM$OR$WARRANT33RES) DEATH$OUTSIDE$US...0.019% Other 0.018% Other 0.018% Other 0.018% Other 0.018% Other 0.018% Other 0.015% Other 0.015% 82 OTHER&CODES Separation VOL$DIS$( PARENTHOOD

  9. PLUTONIUM SEPARATION METHOD

    DOEpatents

    Beaufait, L.J. Jr.; Stevenson, F.R.; Rollefson, G.K.

    1958-11-18

    The recovery of plutonium ions from neutron irradiated uranium can be accomplished by bufferlng an aqueous solutlon of the irradiated materials containing tetravalent plutonium to a pH of 4 to 7, adding sufficient acetate to the solution to complex the uranyl present, adding ferric nitrate to form a colloid of ferric hydroxide, plutonlum, and associated fission products, removing and dissolving the colloid in aqueous nitric acid, oxldizlng the plutonium to the hexavalent state by adding permanganate or dichromate, treating the resultant solution with ferric nitrate to form a colloid of ferric hydroxide and associated fission products, and separating the colloid from the plutonlum left in solution.

  10. On separate universes

    SciTech Connect

    Dai, Liang; Pajer, Enrico; Schmidt, Fabian E-mail: enrico.pajer@gmail.com

    2015-10-01

    The separate universe conjecture states that in General Relativity a density perturbation behaves locally (i.e. on scales much smaller than the wavelength of the mode) as a separate universe with different background density and curvature. We prove this conjecture for a spherical compensated tophat density perturbation of arbitrary amplitude and radius in ΛCDM. We then use Conformal Fermi Coordinates to generalize this result to scalar perturbations of arbitrary configuration and scale in a general cosmology with a mixture of fluids, but to linear order in perturbations. In this case, the separate universe conjecture holds for the isotropic part of the perturbations. The anisotropic part on the other hand is exactly captured by a tidal field in the Newtonian form. We show that the separate universe picture is restricted to scales larger than the sound horizons of all fluid components. We then derive an expression for the locally measured matter bispectrum induced by a long-wavelength mode of arbitrary wavelength, a new result which in standard perturbation theory is equivalent to a relativistic second-order calculation. We show that nonlinear gravitational dynamics does not generate observable contributions that scale like local-type non-Gaussianity f{sup loc}{sub NL}, and hence does not contribute to a scale-dependent galaxy bias Δ b ∝ k{sup −2} on large scales; rather, the locally measurable long-short mode coupling assumes a form essentially identical to subhorizon perturbation theory results, once the long-mode density perturbation is replaced by the synchronous-comoving gauge density perturbation. Apparent f{sup loc}{sub NL}-type contributions arise through projection effects on photon propagation, which depend on the specific large-scale structure tracer and observable considered, and are in principle distinguishable from the local mode coupling induced by gravity. We conclude that any observation of f{sup loc}{sub NL} beyond these projection effects

  11. URANIUM SEPARATION PROCESS

    DOEpatents

    Hyde, E.K.; Katzin, L.I.; Wolf, M.J.

    1959-07-14

    The separation of uranium from a mixture of uranium and thorium by organic solvent extraction from an aqueous solution is described. The uranium is separrted from an aqueous mixture of uranium and thorium nitrates 3 N in nitric acid and containing salting out agents such as ammonium nitrate, so as to bring ihe total nitrate ion concentration to a maximum of about 8 N by contacting the mixture with an immiscible aliphatic oxygen containing organic solvent such as diethyl carbinol, hexone, n-amyl acetate and the like. The uranium values may be recovered from the organic phase by back extraction with water.

  12. SEPARATION OF PLUTONIUM

    DOEpatents

    Maddock, A.G.; Smith, F.

    1959-08-25

    A method is described for separating plutonium from uranium and fission products by treating a nitrate solution of fission products, uranium, and hexavalent plutonium with a relatively water-insoluble fluoride to adsorb fission products on the fluoride, treating the residual solution with a reducing agent for plutonium to reduce its valence to four and less, treating the reduced plutonium solution with a relatively insoluble fluoride to adsorb the plutonium on the fluoride, removing the solution, and subsequently treating the fluoride with its adsorbed plutonium with a concentrated aqueous solution of at least one of a group consisting of aluminum nitrate, ferric nitrate, and manganous nitrate to remove the plutonium from the fluoride.

  13. SEPARATING HAFNIUM FROM ZIRCONIUM

    DOEpatents

    Lister, B.A.J.; Duncan, J.F.; Hutcheon, J.M.

    1956-08-21

    Substantially complete separation of zirconium from hafnium may be obtained by elution of ion exchange material, on which compounds of the elements are adsorbed, with an approximately normal solution of sulfuric acid. Preferably the acid concentration is between 0.8 N amd 1.2 N, amd should not exceed 1.5 N;. Increasing the concentration of sulfate ion in the eluting solution by addition of a soluble sulfate, such as sodium sulfate, has been found to be advantageous. The preferred ion exchange materials are sulfonated polystyrene resins such as Dowex 50,'' and are preferably arranged in a column through which the solutions are passed.

  14. Enhancing Centrifugal Separation With Electrophoresis

    NASA Technical Reports Server (NTRS)

    Herrmann, F. T.

    1986-01-01

    Separation of biological cells by coil-planet centrifuge enhanced by electrophoresis. By itself, coil-planet centrifuge offers relatively gentle method of separating cells under low centrifugal force in physiological medium that keeps cells alive. With addition of voltage gradient to separation column of centrifuge, separation still gentle but faster and more complete. Since separation apparatus contains no rotary seal, probability of leakage, contamination, corrosion, and short circuits reduced.

  15. Integration of current identity-based district-varied health insurance schemes in China: implications and challenges.

    PubMed

    Wang, Hai-Qiang; Liu, Zhi-Heng; Zhang, Yong-Zhao; Luo, Zhuo-Jing

    2012-03-01

    With China's great efforts to improve public health insurance, clear progress has been achieved toward the ambitious full health insurance coverage strategy for all. The current health insurance schemes in China fall into three categories: urban employee basic health insurance scheme, urban resident scheme, and new rural cooperative medical system. Despite their phasic success, these substantially identity-based, district-varied health insurance schemes have separate operation mechanisms, various administrative institutions, and consequently poor connections. On the other hand, the establishment and implementation of various health insurance schemes provide the preconditioning of more sophisticated social health insurance schemes, the increase in the income of urban and rural people, and the great importance attached by the government. Moreover, the reform of the "Hukou" (household register) system provides economical, official, and institutional bases. Therefore, the establishment of an urban-rural integrated, citizen-based, and nationwide-universal health insurance scheme by the government is critically important to attain equality and national connection. Accordingly, the differences between urban and rural areas should be minimized. In addition, the current schemes, administrative institutions, and networks should be integrated and interconnected. Moreover, more expenditure on health insurance might be essential for the integration despite the settings of global financial crisis. Regardless of the possible challenges in implementation, the proposed new scheme is promising and may be applied in the near future for the benefit of the Chinese people and global health.

  16. Separability of dynamical and nonlocal correlations in three dimensions

    NASA Astrophysics Data System (ADS)

    Schäfer, T.; Toschi, A.; Tomczak, Jan M.

    2015-03-01

    While second-order phase transitions always cause strong nonlocal fluctuations, their effect on spectral properties crucially depends on the dimensionality. For the important case of three dimensions, we show that the electron self-energy is well separable into a local dynamical part and static nonlocal contributions. In particular, our nonperturbative many-body calculations for the three-dimensional Hubbard model at different fillings demonstrate that the quasiparticle weight remains essentially momentum independent, including in the presence of overall large nonlocal corrections to the self-energy. Relying on this insight, we propose a "space-time-separated" scheme for many-body perturbation theory that is up to ten times more efficient than current implementations. Besides these far-reaching implications for state-of-the-art electronic structure schemes, our analysis will also provide guidance to the quest of going beyond them.

  17. ONU Power Saving Scheme for EPON System

    NASA Astrophysics Data System (ADS)

    Mukai, Hiroaki; Tano, Fumihiko; Tanaka, Masaki; Kozaki, Seiji; Yamanaka, Hideaki

    PON (Passive Optical Network) achieves FTTH (Fiber To The Home) economically, by sharing an optical fiber among plural subscribers. Recently, global climate change has been recognized as a serious near term problem. Power saving techniques for electronic devices are important. In PON system, the ONU (Optical Network Unit) power saving scheme has been studied and defined in XG-PON. In this paper, we propose an ONU power saving scheme for EPON. Then, we present an analysis of the power reduction effect and the data transmission delay caused by the ONU power saving scheme. According to the analysis, we propose an efficient provisioning method for the ONU power saving scheme which is applicable to both of XG-PON and EPON.

  18. Optimal Symmetric Ternary Quantum Encryption Schemes

    NASA Astrophysics Data System (ADS)

    Wang, Yu-qi; She, Kun; Huang, Ru-fen; Ouyang, Zhong

    2016-11-01

    In this paper, we present two definitions of the orthogonality and orthogonal rate of an encryption operator, and we provide a verification process for the former. Then, four improved ternary quantum encryption schemes are constructed. Compared with Scheme 1 (see Section 2.3), these four schemes demonstrate significant improvements in term of calculation and execution efficiency. Especially, under the premise of the orthogonal rate ɛ as secure parameter, Scheme 3 (see Section 4.1) shows the highest level of security among them. Through custom interpolation functions, the ternary secret key source, which is composed of the digits 0, 1 and 2, is constructed. Finally, we discuss the security of both the ternary encryption operator and the secret key source, and both of them show a high level of security and high performance in execution efficiency.

  19. Robust Synchronization Schemes for Dynamic Channel Environments

    NASA Technical Reports Server (NTRS)

    Xiong, Fugin

    2003-01-01

    Professor Xiong will investigate robust synchronization schemes for dynamic channel environment. A sliding window will be investigated for symbol timing synchronizer and an open loop carrier estimator for carrier synchronization. Matlab/Simulink will be used for modeling and simulations.

  20. A concatenated coding scheme for error control

    NASA Technical Reports Server (NTRS)

    Kasami, T.; Fujiwara, T.; Lin, S.

    1986-01-01

    In this paper, a concatenated coding scheme for error control in data communications is presented and analyzed. In this scheme, the inner code is used for both error correction and detection; however, the outer code is used only for error detection. A retransmission is requested if either the inner code decoder fails to make a successful decoding or the outer code decoder detects the presence of errors after the inner code decoding. Probability of undetected error (or decoding error) of the proposed scheme is derived. An efficient method for computing this probability is presented. Throughput efficiency of the proposed error control scheme incorporated with a selective-repeat ARQ retransmission strategy is also analyzed. Three specific examples are presented. One of the examples is proposed for error control in the NASA Telecommand System.

  1. High-Order Energy Stable WENO Schemes

    NASA Technical Reports Server (NTRS)

    Yamaleev, Nail K.; Carpenter, Mark H.

    2009-01-01

    A third-order Energy Stable Weighted Essentially Non-Oscillatory (ESWENO) finite difference scheme developed by Yamaleev and Carpenter was proven to be stable in the energy norm for both continuous and discontinuous solutions of systems of linear hyperbolic equations. Herein, a systematic approach is presented that enables 'energy stable' modifications for existing WENO schemes of any order. The technique is demonstrated by developing a one-parameter family of fifth-order upwind-biased ESWENO schemes; ESWENO schemes up to eighth order are presented in the appendix. New weight functions are also developed that provide (1) formal consistency, (2) much faster convergence for smooth solutions with an arbitrary number of vanishing derivatives, and (3) improved resolution near strong discontinuities.

  2. A robust coding scheme for packet video

    NASA Technical Reports Server (NTRS)

    Chen, Yun-Chung; Sayood, Khalid; Nelson, Don J.

    1992-01-01

    A layered packet video coding algorithm based on a progressive transmission scheme is presented. The algorithm provides good compression and can handle significant packet loss with graceful degradation in the reconstruction sequence. Simulation results for various conditions are presented.

  3. Renormalization scheme dependence with renormalization group summation

    NASA Astrophysics Data System (ADS)

    McKeon, D. G. C.

    2015-08-01

    We consider all perturbative radiative corrections to the total e+e- annihilation cross section Re+e- showing how the renormalization group (RG) equation associated with the radiatively induced mass scale μ can be used to sum the logarithmic contributions in two ways. First of all, one can sum leading-log, next-to-leading-log, etc., contributions to Re+e- using in turn the one-loop, two-loop, etc., contributions to the RG function β . A second summation shows how all logarithmic corrections to Re+e- can be expressed entirely in terms of the log-independent contributions when one employs the full β -function. Next, using Stevenson's characterization of any choice of renormalization scheme by the use of the contributions to the β -function arising beyond two-loop order, we examine the RG scheme dependence in Re+e- when using the second way of summing logarithms. The renormalization scheme invariants that arise are then related to the renormalization scheme invariants found by Stevenson. We next consider two choices of the renormalization scheme, one which can be used to express Re+e- solely in terms of two powers of a running coupling, and the second which can be used to express Re+e- as an infinite series in the two-loop running coupling (i.e., a Lambert W -function). In both cases, Re+e- is expressed solely in terms of renormalization scheme invariant parameters that are to be computed by a perturbative evaluation of Re+e-. We then establish how in general the coupling constant arising in one renormalization scheme can be expressed as a power series of the coupling arising in any other scheme. We then establish how, by using a different renormalization mass scale at each order of perturbation theory, all renormalization scheme dependence can be absorbed into these mass scales when one uses the second way of summing logarithmic corrections to Re+e-. We then employ the approach to renormalization scheme dependency that we have applied to Re+e- to a RG summed

  4. A new method for separating first row transition metals and actinides from synthetic melt glass

    SciTech Connect

    Roman, Audrey Rae; Bond, Evelyn M.

    2016-01-14

    A new method was developed for separating Co, Fe, and Sc from complex debris matrices using the extraction chromatography resin DGA. The activation products Co-58, Mn-54, and Sc-46 were used to characterize the separation of the synthetic melt glass solutions. In the separation scheme that was developed, Au, Co, Cu, Fe, Sc, and Ti were separated from the rest of the sample constituents. In this paper, the synthetic melt glass separation method, efficiency, recoveries, and the length of procedure will be discussed. In conclusion, batch contact adsorption studies for Na and Sc for DGA resin are discussed as well.

  5. Asynchronous Communication Scheme For Hypercube Computer

    NASA Technical Reports Server (NTRS)

    Madan, Herb S.

    1988-01-01

    Scheme devised for asynchronous-message communication system for Mark III hypercube concurrent-processor network. Network consists of up to 1,024 processing elements connected electrically as though were at corners of 10-dimensional cube. Each node contains two Motorola 68020 processors along with Motorola 68881 floating-point processor utilizing up to 4 megabytes of shared dynamic random-access memory. Scheme intended to support applications requiring passage of both polled or solicited and unsolicited messages.

  6. Dynamic Restarting Schemes for Eigenvalue Problems

    SciTech Connect

    Wu, Kesheng; Simon, Horst D.

    1999-03-10

    In studies of restarted Davidson method, a dynamic thick-restart scheme was found to be excellent in improving the overall effectiveness of the eigen value method. This paper extends the study of the dynamic thick-restart scheme to the Lanczos method for symmetric eigen value problems and systematically explore a range of heuristics and strategies. We conduct a series of numerical tests to determine their relative strength and weakness on a class of electronic structure calculation problems.

  7. Finance schemes for funding private orthodontic treatment.

    PubMed

    Perks, S

    1997-02-01

    Over the last ten years there has been a steady increase in the volume of private dental treatment and numerous finance schemes have been developed to help both patients and dentists. Private orthodontic treatment is increasing and the purpose of this article is to summarise the main features of the schemes currently available to fund private orthodontic treatment and to provide a source of reference.

  8. Particle separation options for emergency water treatment.

    PubMed

    Dorea, C C; Bertrand, S; Clarke, B A

    2006-01-01

    Emergencies can result from the effects of unpredictable natural forces or from the cruelty of conflicts. The affected population is often left vulnerable to increased health risks. The victims' exposure to these risks can be reduced by timely public health interventions. Often, one of the first basic mitigations is the provision of water for essential needs. The quickest option, and generally more polluted, is of surface waters. We have reviewed particle separation options for emergency water treatment of surface waters. These vary from granular filtration package treatment facilities to ceramic candle filters and have therefore been broadly classified in three categories: modular, mobile and point-of-use (or household). The operational requirements and process limitations that can influence the choice of each option are discussed alongside with their underlying particle separation mechanisms and performance data.

  9. Separation of ions in acidic solution by capillary electrophoresis

    SciTech Connect

    Thornton, Michelle

    1997-10-08

    Capillary electrophoresis (CE) is an effective method for separating ionic species according to differences in their electrophoretic mobilities. CE separations of amino acids by direct detection are difficult due to their similar electrophoretic mobilities and low absorbances. However, native amino acids can be separated by CE as cations at a low pH by adding an alkanesulfonic acid to the electrolyte carrier which imparts selectivity to the system. Derivatization is unnecessary when direct UV detection is used at 185 nm. Simultaneous speciation of metal cations such as vanadium (IV) and vanadium (V) can easily be performed without complexation prior to analysis. An indirect UV detection scheme for acidic conditions was also developed using guanidine as the background carrier electrolyte (BCE) for the indirect detection of metal cations. Three chapters have been removed for separate processing. This report contains introductory material, references, and general conclusions. 80 refs.

  10. Low pressure hydrocyclone separator

    SciTech Connect

    Flanigan, D.A.; Stolhand, J.E.

    1989-07-04

    This patent describes a method of separating a dispersed phase liquid from a bulk phase liquid of a liquid-liquid mixture, the dispersed phase and bulk phase liquids having different densities. The method comprises the steps of: providing a supply of the liquid-liquid mixture at a first pressure; providing a pump means including means for minimizing degradation of the volumetric means size of droplets of the dispersed phase further including a pump size for maintaining the pump means at substantially near maximum flow rate capacity; pumping the liquid-liquid mixture with at least one pump means to a second pressure such that a differential between the first and second pressures is not substantially greater than a differential pressure at which the pump means begins to substantially degrade the volumetric mean size of droplets of the dispersed phase liquid passing therethrough, the pumping without substantial droplet degradation being achieved by operating the pump means at relatively near its maximum flow rate capacity to substantially reduce on a percentage basis the effect of fluid slippage within the pump means; directing the liquid-liquid mixture from the pump means to a hydrocyclone; and separating a substantial portion of the dispersed phase liquid from the liquid-liquid mixture in the hydrocyclone.

  11. Explosively separable casing

    DOEpatents

    Jacobson, A.K.; Rychnovsky, R.E.; Visbeck, C.N.

    An explosively separable casing including a cylindrical afterbody and a circular cover for one end of the afterbody is disclosed. The afterbody has a cylindrical tongue extending longitudinally from one end which is matingly received in a corresponding groove in the cover. The groove is sized to provide a picket between the end of the tongue and the remainder of the groove so that an explosive can be located therein. A seal is also provided between the tongue and the groove for sealing the pocket from the atmosphere. A frangible holding device is utilized to hold the cover to the afterbody. When the explosive is ignited, the increase in pressure in the pocket causes the cover to be accelerated away from the afterbody. Preferably, the inner wall of the afterbody is in the same plane as the inner wall of the tongue to provide a maximum space for storage in the afterbody and the side wall of the cover is thicker than the side wall of the afterbody so as to provide a sufficiently strong surrounding portion for the pocket in which the explosion takes place. The detonator for the explosive is also located on the cover and is carried away with the cover during separation. The seal is preferably located at the longitudinal end of the tongue and has a chevron cross section.

  12. Explosively separable casing

    DOEpatents

    Jacobson, Albin K.; Rychnovsky, Raymond E.; Visbeck, Cornelius N.

    1985-01-01

    An explosively separable casing including a cylindrical afterbody and a circular cover for one end of the afterbody is disclosed. The afterbody has a cylindrical tongue extending longitudinally from one end which is matingly received in a corresponding groove in the cover. The groove is sized to provide a pocket between the end of the tongue and the remainder of the groove so that an explosive can be located therein. A seal is also provided between the tongue and the groove for sealing the pocket from the atmosphere. A frangible holding device is utilized to hold the cover to the afterbody. When the explosive is ignited, the increase in pressure in the pocket causes the cover to be accelerated away from the afterbody. Preferably, the inner wall of the afterbody is in the same plane as the inner wall of the tongue to provide a maximum space for storage in the afterbody and the side wall of the cover is thicker than the side wall of the afterbody so as to provide a sufficiently strong surrounding portion for the pocket in which the explosion takes place. The detonator for the explosive is also located on the cover and is carried away with the cover during separation. The seal is preferably located at the longitudinal end of the tongue and has a chevron cross section.

  13. Wax separation process

    SciTech Connect

    Broadhurst, T.E.

    1980-06-03

    Particles of solid wax are separated from a slurry comprising said wax particles and a hydrocarbon oil by filtering the slurry through a cloth filter medium. It has been found that using, as the filter medium, a needled-felt cloth fabricated from fibers fusible by means of an open flame and having a singed surface on which the wax is collected results in an unexpected reduction in filter cloth blinding thereby yielding up to 30% increased throughput through the filter cloth and greatly reducing the frequency of washing the filter cloth. The cloth is further characterized in that it has a permeability to air in excess of about 3 cubic feet per minute per square foot of cloth surface at a differential pressure of 0.5 inches of water, a root mean square surface roughness in excess of 500 rms microinches and a fouling factor in excess of about 75%. This improved process has been found to be particularly useful for separating wax particles from a dewaxed lube oil slurry.

  14. Printed Spacecraft Separation System

    SciTech Connect

    Holmans, Walter; Dehoff, Ryan

    2016-10-01

    In this project Planetary Systems Corporation proposed utilizing additive manufacturing (3D printing) to manufacture a titanium spacecraft separation system for commercial and US government customers to realize a 90% reduction in the cost and energy. These savings were demonstrated via “printing-in” many of the parts and sub-assemblies into one part, thus greatly reducing the labor associated with design, procurement, assembly and calibration of mechanisms. Planetary Systems Corporation redesigned several of the components of the separation system based on additive manufacturing principles including geometric flexibility and the ability to fabricate complex designs, ability to combine multiple parts of an assembly into a single component, and the ability to optimize design for specific mechanical property targets. Shock absorption was specifically targeted and requirements were established to attenuate damage to the Lightband system from shock of initiation. Planetary Systems Corporation redesigned components based on these requirements and sent the designs to Oak Ridge National Laboratory to be printed. ORNL printed the parts using the Arcam electron beam melting technology based on the desire for the parts to be fabricated from Ti-6Al-4V based on the weight and mechanical performance of the material. A second set of components was fabricated from stainless steel material on the Renishaw laser powder bed technology due to the improved geometric accuracy, surface finish, and wear resistance of the material. Planetary Systems Corporation evaluated these components and determined that 3D printing is potentially a viable method for achieving significant cost and savings metrics.

  15. Virus separation using membranes.

    PubMed

    Grein, Tanja A; Michalsky, Ronald; Czermak, Peter

    2014-01-01

    Industrial manufacturing of cell culture-derived viruses or virus-like particles for gene therapy or vaccine production are complex multistep processes. In addition to the bioreactor, such processes require a multitude of downstream unit operations for product separation, concentration, or purification. Similarly, before a biopharmaceutical product can enter the market, removal or inactivation of potential viral contamination has to be demonstrated. Given the complexity of biological solutions and the high standards on composition and purity of biopharmaceuticals, downstream processing is the bottleneck in many biotechnological production trains. Membrane-based filtration can be an economically attractive and efficient technology for virus separation. Viral clearance, for instance, of up to seven orders of magnitude has been reported for state of the art polymeric membranes under best conditions.This chapter summarizes the fundamentals of virus ultrafiltration, diafiltration, or purification with adsorptive membranes. In lieu of an impractical universally applicable protocol for virus filtration, application of these principles is demonstrated with two examples. The chapter provides detailed methods for production, concentration, purification, and removal of a rod-shaped baculovirus (Autographa californica M nucleopolyhedrovirus, about 40 × 300 nm in size, a potential vector for gene therapy, and an industrially important protein expression system) or a spherical parvovirus (minute virus of mice, 22-26 nm in size, a model virus for virus clearance validation studies).

  16. Apparatus for diffusion separation

    DOEpatents

    Nierenberg, William A.

    1976-08-10

    1. A diffuser separator apparatus which comprises a plurality of flow channels in a single stage, each of said channels having an inlet port and an outlet port and a constant cross sectional area between said ports, at least a portion of the defining surface of each of said channels being a diffusion separation membrane, and each of said channels having a different cross sectional area, means for connecting said channels in series so that each successive channel of said series has a smaller cross sectional area than the previous channel of said series, a source of gaseous mixture, individual means for flowing said gaseous mixture to the inlet port of each of said channels, gas receiving and analyzing means, individual means for flowing gas passing from each of said outlet ports and means for flowing gas passing through said membranes to said receiving and analyzing means, and individual means for connecting the outlet port of each channel with the inlet port of the channel having the next smaller cross sectional area.

  17. Separable fastening device

    DOEpatents

    Harvey, Andrew C.; Ribich, William A.; Marinaccio, Paul J.; Sawaf, Bernard E.

    1987-12-01

    A separable fastener system has a first separable member that includes a series of metal hook sheets disposed in stacked relation that defines an array of hook elements on its broad surface. Each hook sheet is a planar metal member of uniform thickness and has a body portion with a series of hook elements formed along one edge of the body. Each hook element includes a stem portion, a deflecting surface portion, and a latch portion. Metal spacer sheets are disposed between the hook sheets and may be varied in thickness and in number to control the density of the hook elements on the broad surface of the first fastener member. The hook and spacer sheets are secured together in stacked relation. A second fastener member has a surface of complementary engaging elements extending along its broad surface which are releasably interengageable with the hook elements of the first fastener member, the deflecting surfaces of the hook elements of the first fastener member tending to deflect hook engaging portions of the second fastener member and the latch portions of the hook elements of the first fastener member engaging portions of the second fastener member in fastening relation.

  18. Efficient multiparty quantum-secret-sharing schemes

    SciTech Connect

    Xiao Li; Deng Fuguo; Long Guilu; Pan Jianwei

    2004-05-01

    In this work, we generalize the quantum-secret-sharing scheme of Hillery, Buzek, and Berthiaume [Phys. Rev. A 59, 1829 (1999)] into arbitrary multiparties. Explicit expressions for the shared secret bit is given. It is shown that in the Hillery-Buzek-Berthiaume quantum-secret-sharing scheme the secret information is shared in the parity of binary strings formed by the measured outcomes of the participants. In addition, we have increased the efficiency of the quantum-secret-sharing scheme by generalizing two techniques from quantum key distribution. The favored-measuring-basis quantum-secret-sharing scheme is developed from the Lo-Chau-Ardehali technique [H. K. Lo, H. F. Chau, and M. Ardehali, e-print quant-ph/0011056] where all the participants choose their measuring-basis asymmetrically, and the measuring-basis-encrypted quantum-secret-sharing scheme is developed from the Hwang-Koh-Han technique [W. Y. Hwang, I. G. Koh, and Y. D. Han, Phys. Lett. A 244, 489 (1998)] where all participants choose their measuring basis according to a control key. Both schemes are asymptotically 100% in efficiency, hence nearly all the Greenberger-Horne-Zeilinger states in a quantum-secret-sharing process are used to generate shared secret information.

  19. FRESCO: flexible alignment with rectangle scoring schemes.

    PubMed

    Dalca, A V; Brudno, M

    2008-01-01

    While the popular DNA sequence alignment tools incorporate powerful heuristics to allow for fast and accurate alignment of DNA, most of them still optimize the classical Needleman Wunsch scoring scheme. The development of novel scoring schemes is often hampered by the difficulty of finding an optimizing algorithm for each non-trivial scheme. In this paper we define the broad class of rectangle scoring schemes, and describe an algorithm and tool that can align two sequences with an arbitrary rectangle scoring scheme in polynomial time. Rectangle scoring schemes encompass some of the popular alignment scoring metrics currently in use, as well as many other functions. We investigate a novel scoring function based on minimizing the expected number of random diagonals observed with the given scores and show that it rivals the LAGAN and Clustal-W aligners, without using any biological or evolutionary parameters. The FRESCO program, freely available at http://compbio.cs.toronto.edu/fresco, gives bioinformatics researchers the ability to quickly compare the performance of other complex scoring formulas without having to implement new algorithms to optimize them.

  20. Plasma separation: physical separation at the molecular level

    NASA Astrophysics Data System (ADS)

    Gueroult, Renaud; Rax, Jean-Marcel; Fisch, Nathaniel J.

    2016-09-01

    Separation techniques are usually divided in two categories depending on the nature of the discriminating property: chemical or physical. Further to this difference, physical and chemical techniques differ in that chemical separation typically occurs at the molecular level, while physical separation techniques commonly operate at the macroscopic scale. Separation based on physical properties can in principle be realized at the molecular or even atomic scale by ionizing the mixture. This is in essence plasma based separation. Due to this fundamental difference, plasma based separation stands out from other separation techniques, and features unique properties. In particular, plasma separation allows separating different elements or chemical compounds based on physical properties. This could prove extremely valuable to separate macroscopically homogeneous mixtures made of substances of similar chemical formulation. Yet, the realization of plasma separation techniques' full potential requires identifying and controlling basic mechanisms in complex plasmas which exhibit suitable separation properties. In this paper, we uncover the potential of plasma separation for various applications, and identify the key physics mechanisms upon which hinges the development of these techniques.

  1. LLRF System for the CEBAF Separator Upgrade

    SciTech Connect

    Plawski, Tomasz E.; Bachimanchi, Ramakrishna; Hovater, J. Curt; Seidman, David J.; Wissmann, Mark J.

    2014-12-01

    The Continuous Electron Beam Accelerator Facility (CEBAF) energy upgrade from 6 GeV to 12 GeV includes the installation of four new 748.5 MHz normal conducting deflecting cavities in the 5th pass extraction region. This system will work together with the existing 499 MHz RF Separator in order to allow simultaneous delivery of the beam to four CEBAF experimental halls. The RF system employs two digital LLRF systems controlling four cavities in a vector sum. Cavity tune information of the individual cavities is also obtained using a multiplexing scheme of the forward and reflected RF signals. In this paper we will present detailed LLRF design and the current status of the CEBAF 748.5/499 MHz beam extraction system.

  2. Very low bit streaming image compression coder based on lift scheme

    NASA Astrophysics Data System (ADS)

    Tao, Hongjiu; Tian, Jinwen; Liu, Jianguo; Yu, Qiuzhe; Xu, Hongbo

    2001-09-01

    This paper presents a novel compression encoding/decoding method based on lift scheme for I-VOP. In traditional coding I-VOP algorithm, the textures and shapes are separately coded, and the macro-block DCT coding method is adopted in the coding texture and 16x16 BAB(Binary Alpha Block) coding method is employed in shape coding. The texture and shape coding method is not of embed feature. The algorithm based on lift scheme for I-VOP, the texture and shape at same time is coded and the bit streaming is of embed feature.

  3. Bladder tumours and occupation: a coroner's notification scheme

    PubMed Central

    Veys, C. A.

    1974-01-01

    Veys, C. A. (1974).British Journal of Industrial Medicine,31, 65-71. Bladder tumours and occupation: a coroner's notification scheme. The disease of bladder cancer accounted for 2 763 male and 1 107 female deaths in England and Wales during 1971. How much of this total is influenced by aetiological factors in the working environment is still largely unknown and is only now beginning to be studied. In order to elucidate this question further, a coroner's notification scheme for all bladder tumours occuring within a defined geographical area was started in 1965. Details of all persons dying, on whose death certificate a bladder tumour was mentioned, were notified to the coroner's office within a six-year period (1965-70). A necropsy was carried out in almost all cases. A subsequent searching enquiry into the lifetime occupational history was conducted and this was then related to two industrial check-lists previously drawn up, on which the occupations listed exhibited either a true cause and effect relationship, or were merely associated in statistical terms. The finding that about 20% of persons dying of this disease had a suspicious occupational history of exposure to a carcinogen was broadly in agreement with some other recent surveys whose methodology was different. In only one third of these cases, however, could the working environment be directly and realistically implicated. The study supports the conclusion that the importance of occupational factors in the aetiology of bladder tumours has hitherto been underestimated. PMID:4821412

  4. A New Framework to Compare Mass-Flux Schemes Within the AROME Numerical Weather Prediction Model

    NASA Astrophysics Data System (ADS)

    Riette, Sébastien; Lac, Christine

    2016-08-01

    In the Application of Research to Operations at Mesoscale (AROME) numerical weather forecast model used in operations at Météo-France, five mass-flux schemes are available to parametrize shallow convection at kilometre resolution. All but one are based on the eddy-diffusivity-mass-flux approach, and differ in entrainment/detrainment, the updraft vertical velocity equation and the closure assumption. The fifth is based on a more classical mass-flux approach. Screen-level scores obtained with these schemes show few discrepancies and are not sufficient to highlight behaviour differences. Here, we describe and use a new experimental framework, able to compare and discriminate among different schemes. For a year, daily forecast experiments were conducted over small domains centred on the five French metropolitan radio-sounding locations. Cloud base, planetary boundary-layer height and normalized vertical profiles of specific humidity, potential temperature, wind speed and cloud condensate were compared with observations, and with each other. The framework allowed the behaviour of the different schemes in and above the boundary layer to be characterized. In particular, the impact of the entrainment/detrainment formulation, closure assumption and cloud scheme were clearly visible. Differences mainly concerned the transport intensity thus allowing schemes to be separated into two groups, with stronger or weaker updrafts. In the AROME model (with all interactions and the possible existence of compensating errors), evaluation diagnostics gave the advantage to the first group.

  5. A novel simplified Bernoulli trials collision scheme in the direct simulation Monte Carlo with intelligence over particle distances

    NASA Astrophysics Data System (ADS)

    Goshayeshi, Bijan; Roohi, Ehsan; Stefanov, Stefan

    2015-10-01

    This work deals with the development of an intelligent inter-particle collision scheme using the Direct Simulation Monte Carlo (DSMC) method. Conventional DSMC collision schemes cannot perceive collision distances by their own routines and, consequently, must rely on other techniques to provide a choice of collision pairs with a smaller inter-particle space. Here, we propose a modification of the Simplified Bernoulli Trials (SBT) scheme, called the Intelligent Simplified Bernoulli Trials (ISBT) scheme, which can create pseudo-circular subcells that reduce approximately 25%-32% of the mean collision separation distance. The ISBT scheme tries to arrange the particle indexing and collision acceptance-rejection of the SBT scheme in a way that leads to the formation of virtual clusters. These inner-cell clusters then will cause the selection of the "near-neighbor" pair, which leads to smaller mean collision separation distances. Different low- and high-speed test cases, e.g., lid-driven cavity flow, steady hypersonic flow over a two-dimensional cylinder, and Mach 15.6 nitrogen flow over a 25°-55° axisymmetric biconic, are selected to assess the accuracy and efficiency of the ISBT collision scheme.

  6. METHOD OF SEPARATING PLUTONIUM

    DOEpatents

    Brown, H.S.; Hill, O.F.

    1958-02-01

    Plutonium hexafluoride is a satisfactory fluorinating agent and may be reacted with various materials capable of forming fluorides, such as copper, iron, zinc, etc., with consequent formation of the metal fluoride and reduction of the plutonium to the form of a lower fluoride. In accordance with the present invention, it has been found that the reactivity of plutonium hexafluoride with other fluoridizable materials is so great that the process may be used as a method of separating plutonium from mixures containing plutonium hexafluoride and other vaporized fluorides even though the plutonium is present in but minute quantities. This process may be carried out by treating a mixture of fluoride vapors comprising plutonium hexafluoride and fluoride of uranium to selectively reduce the plutonium hexafluoride and convert it to a less volatile fluoride, and then recovering said less volatile fluoride from the vapor by condensation.

  7. METHOD OF SEPARATION

    DOEpatents

    Boyd, G.E.

    1958-08-26

    A process is presented fer separating uranium, plutonium, and fission products ions from uranyl nitrate solutions having a pH value between 1 and 3 obtained by dissolving neutron irradiated uranium. The method consists in passing such solutions through a bed of cation exchange resin, which may be a sulfonated phenol formaidehyde type. Following the adsorption step the resin is first treated with a solution of 0.2M to 0.3M sulfuric acid to desorb the uranium. Fission product ions are then desorbed by treating the resin in phosphoric acid and 1M in nitric acid. Lastly, the plutonium may be desorbed by treating the resin with a solution approximately 0.8M in phosphoric acid and 1M in nitric acid.

  8. Apparatus for diffusion separation

    DOEpatents

    Nierenberg, William A.; Pontius, Rex B.

    1976-08-10

    1. The method of testing the separation efficiency of porous permeable membranes which comprises causing a stream of a gaseous mixture to flow into contact with one face of a finely porous permeable membrane under such conditions that a major fraction of the mixture diffuses through the membrane, maintaining a rectangular cross section of the gaseous stream so flowing past said membrane, continuously recirculating the gas that diffuses through said membrane and continuously withdrawing the gas that does not diffuse through said membrane and maintaining the volume of said recirculating gas constant by continuously introducing into said continuously recirculating gas stream a mass of gas equivalent to that which is continuously withdrawn from said gas stream and comparing the concentrations of the light component in the entering gas, the withdrawn gas and the recirculated gas in order to determine the efficiency of said membrane.

  9. Isotope separation apparatus

    DOEpatents

    Arnush, Donald; MacKenzie, Kenneth R.; Wuerker, Ralph F.

    1980-01-01

    Isotope separation apparatus consisting of a plurality of cells disposed adjacent to each other in an evacuated container. A common magnetic field is established extending through all of the cells. A source of energetic electrons at one end of the container generates electrons which pass through the cells along the magnetic field lines. Each cell includes an array of collector plates arranged in parallel or in tandem within a common magnetic field. Sets of collector plates are disposed adjacent to each other in each cell. Means are provided for differentially energizing ions of a desired isotope by applying energy at the cyclotron resonant frequency of the desired isotope. As a result, the energized desired ions are preferentially collected by the collector plates.

  10. DRY FLUORINE SEPARATION METHOD

    DOEpatents

    Seaborg, G.T.; Gofman, J.W.; Stoughton, R.W.

    1959-05-19

    Preparation and separation of U/sup 233/ by irradiation of ThF/sub 4/ is described. During the neutron irradiation to produce Pa/sup 233/ a fluorinating agent such as HF, F/sub 2/, or HF + F/sub 2/ is passed through the ThF/sub 4/ powder to produce PaF/sub 5/. The PaF/sub 5/, being more volatile, is removed as a gas and allowed to decay radioactively to U/sup 233/ fluoride. A batch procedure in which ThO/sub 2/ or Th metal is irradiated and fluorinated is suggested. Some Pa and U fluoride volatilizes away. Then the remainder is fluorinated with F/sub 2/ to produce very volatile UF/sub 6/ which is recovered. (T.R.H.)

  11. Organic contaminant separator

    DOEpatents

    Del Mar, Peter; Hemberger, Barbara J.

    1991-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a polyolefin tube having an internal diameter of from about 0.01 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the tube, (b) passing a solvent through the tube, said solvent capable of separating the adhered organic contaminant from the tube. Further, a chromatographic apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a polyolefin tube having an internal diameter of from about 0.01 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the tube is disclosed.

  12. Precision gap particle separator

    DOEpatents

    Benett, William J.; Miles, Robin; Jones, II., Leslie M.; Stockton, Cheryl

    2004-06-08

    A system for separating particles entrained in a fluid includes a base with a first channel and a second channel. A precision gap connects the first channel and the second channel. The precision gap is of a size that allows small particles to pass from the first channel into the second channel and prevents large particles from the first channel into the second channel. A cover is positioned over the base unit, the first channel, the precision gap, and the second channel. An port directs the fluid containing the entrained particles into the first channel. An output port directs the large particles out of the first channel. A port connected to the second channel directs the small particles out of the second channel.

  13. Block copolymer battery separator

    SciTech Connect

    Wong, David; Balsara, Nitash Pervez

    2016-04-26

    The invention herein described is the use of a block copolymer/homopolymer blend for creating nanoporous materials for transport applications. Specifically, this is demonstrated by using the block copolymer poly(styrene-block-ethylene-block-styrene) (SES) and blending it with homopolymer polystyrene (PS). After blending the polymers, a film is cast, and the film is submerged in tetrahydrofuran, which removes the PS. This creates a nanoporous polymer film, whereby the holes are lined with PS. Control of morphology of the system is achieved by manipulating the amount of PS added and the relative size of the PS added. The porous nature of these films was demonstrated by measuring the ionic conductivity in a traditional battery electrolyte, 1M LiPF.sub.6 in EC/DEC (1:1 v/v) using AC impedance spectroscopy and comparing these results to commercially available battery separators.

  14. PRICE: primitive centred schemes for hyperbolic systems

    NASA Astrophysics Data System (ADS)

    Toro, E. F.; Siviglia, A.

    2003-08-01

    We present first- and higher-order non-oscillatory primitive (PRI) centred (CE) numerical schemes for solving systems of hyperbolic partial differential equations written in primitive (or non-conservative) form. Non-conservative systems arise in a variety of fields of application and they are adopted in that form for numerical convenience, or more importantly, because they do not posses a known conservative form; in the latter case there is no option but to apply non-conservative methods. In addition we have chosen a centred, as distinct from upwind, philosophy. This is because the systems we are ultimately interested in (e.g. mud flows, multiphase flows) are exceedingly complicated and the eigenstructure is difficult, or very costly or simply impossible to obtain. We derive six new basic schemes and then we study two ways of extending the most successful of these to produce second-order non-oscillatory methods. We have used the MUSCL-Hancock and the ADER approaches. In the ADER approach we have used two ways of dealing with linear reconstructions so as to avoid spurious oscillations: the ADER TVD scheme and ADER with ENO reconstruction. Extensive numerical experiments suggest that all the schemes are very satisfactory, with the ADER/ENO scheme being perhaps the most promising, first for dealing with source terms and secondly, because higher-order extensions (greater than two) are possible. Work currently in progress includes the application of some of these ideas to solve the mud flow equations. The schemes presented are generic and can be applied to any hyperbolic system in non-conservative form and for which solutions include smooth parts, contact discontinuities and weak shocks. The advantage of the schemes presented over upwind-based methods is simplicity and efficiency, and will be fully realized for hyperbolic systems in which the provision of upwind information is very costly or is not available.

  15. Combining image-processing and image compression schemes

    NASA Technical Reports Server (NTRS)

    Greenspan, H.; Lee, M.-C.

    1995-01-01

    An investigation into the combining of image-processing schemes, specifically an image enhancement scheme, with existing compression schemes is discussed. Results are presented on the pyramid coding scheme, the subband coding scheme, and progressive transmission. Encouraging results are demonstrated for the combination of image enhancement and pyramid image coding schemes, especially at low bit rates. Adding the enhancement scheme to progressive image transmission allows enhanced visual perception at low resolutions. In addition, further progressing of the transmitted images, such as edge detection schemes, can gain from the added image resolution via the enhancement.

  16. Inhalation exposure of animals.

    PubMed Central

    Phalen, R F

    1976-01-01

    Relative advantages and disadvantages and important design criteria for various exposure methods are presented. Five types of exposures are discussed: whole-body chambers, head-only exposures, nose or mouth-only methods, lung-only exposures, and partial-lung exposures. Design considerations covered include: air cleaning and conditioning; construction materials; losses of exposure materials; evenness of exposure; sampling biases; animal observation and care; noise and vibration control, safe exhausts, chamber loading, reliability, pressure fluctuations; neck seals, masks, animal restraint methods; and animal comfort. Ethical considerations in use of animals in inhalation experiments are also discussed. PMID:1017420

  17. Medium wave exposure characterisation using exposure quotients.

    PubMed

    Paniagua, Jesús M; Rufo, Montaña; Jiménez, Antonio; Antolín, Alicia; Pinar, Iván

    2010-06-01

    One of the aspects considered in the International Commission on Non-Ionizing Radiation Protection guidelines is that, in situations of simultaneous exposure to fields of different frequencies, exposure quotients for thermal and electrical stimulation effects should be examined. The aim of the present work was to analyse the electromagnetic radiation levels and exposure quotients for exposure to multiple-frequency sources in the vicinity of medium wave radio broadcasting antennas. The measurements were made with a spectrum analyser and a monopole antenna. Kriging interpolation was used to prepare contour maps and to estimate the levels in the towns and villages of the zone. The results showed that the exposure quotient criterion based on electrical stimulation effects to be more stringent than those based on thermal effects or power density levels. Improvement of dosimetry evaluations requires the spectral components of the radiation to be quantified, followed by application of the criteria for exposure to multiple-frequency sources.

  18. Tropical cyclone intensity change. A quantitative forecasting scheme

    NASA Technical Reports Server (NTRS)

    Dropco, K. M.; Gray, W. M.

    1981-01-01

    One to two day future tropical cyclone intensity change from both a composite and an individual case point-of-view are discussed. Tropical cyclones occurring in the Gulf of Mexico during the period 1957-1977 form the primary data source. Weather charts of the NW Atlantic were initially examined, but few differences were found between intensifying and non-intensifying cyclones. A rawinsonde composite analysis detected composite differences in the 200 mb height fields, the 850 mb temperature fields, the 200 mb zonal wind and the vertical shears of the zonal wind. The individual cyclones which make up the composite study were then separately examined using this composite case knowledge. Similar parameter differences were found in a majority of individual cases. A cyclone intensity change forecast scheme was tested against independent storm cases. Correct predictions of intensification or non-intensification could be made approximately 75% of the time.

  19. An Intrinsically Digital Amplification Scheme for Hearing Aids

    NASA Astrophysics Data System (ADS)

    Blamey, Peter J.; Macfarlane, David S.; Steele, Brenton R.

    2005-12-01

    Results for linear and wide-dynamic range compression were compared with a new 64-channel digital amplification strategy in three separate studies. The new strategy addresses the requirements of the hearing aid user with efficient computations on an open-platform digital signal processor (DSP). The new amplification strategy is not modeled on prior analog strategies like compression and linear amplification, but uses statistical analysis of the signal to optimize the output dynamic range in each frequency band independently. Using the open-platform DSP processor also provided the opportunity for blind trial comparisons of the different processing schemes in BTE and ITE devices of a high commercial standard. The speech perception scores and questionnaire results show that it is possible to provide improved audibility for sound in many narrow frequency bands while simultaneously improving comfort, speech intelligibility in noise, and sound quality.

  20. CAISO flicks switch on nodal scheme and lights stay on

    SciTech Connect

    2009-06-15

    In 2000-01, two years after introducing a competitive wholesale power auction in California - with a separate day-ahead zonal market operated by the California Power Exchange and a zonal market for ancillary services and balancing energy operated by the California Independent System Operator (CAISO) - the California market collapsed from exorbitant prices, flagrant gaming, and abuse of market power. Nine years later, CAISO introduced a nodal pricing auction for the wholesale market in April, replacing the zonal scheme, which was among many causes of the original market's demise. With nearly 3,000 nodes on the network, high prices in one region do not affect prices everywhere on the system. After investing some $200 million to upgrade the software, countless delays, and 18 months of market simulation and testing, the new auction was introduced and nothing unusual happened.

  1. Multiuser CSK scheme for indoor visible light communications.

    PubMed

    Luna-Rivera, J M; Perez-Jimenez, R; Rabadan-Borjes, J; Rufo-Torres, J; Guerra, V; Suarez-Rodriguez, C

    2014-10-06

    Color Shift Keying (CSK) is a new modulation scheme for visible light communication systems using RGB LEDs which has been standardized in the PHY III level of the IEEE 802.15.7. This paper proposes some modifications so as to include multiuser capabilities provided by a time-based multiplexing, with the modulation constellation symbols being adapted to encode data with the luminux powers of the red, green and blue color bands respectively. This is achieved by employing a simple and low-complexity time-based pulse signals structure to separate the users' data symbols, while a three-dimensional signal constellation design is merged to improve data throughput. Numerical simulations are carried out to assess the performance of this novel architecture. The statistical properties of the transmitted RGB signals ensure dimming capabilities and that the illumination function is unaffected by flickering.

  2. High Atomic Weight Isotope Separator.

    DTIC Science & Technology

    This patent discusses a method of separating one isotopic species of a given element from a mixture. Collisionless plasma instabilities slow down the ions and oppositely charged electrodes separate the isotopes.

  3. A classification scheme for risk assessment methods.

    SciTech Connect

    Stamp, Jason Edwin; Campbell, Philip LaRoche

    2004-08-01

    This report presents a classification scheme for risk assessment methods. This scheme, like all classification schemes, provides meaning by imposing a structure that identifies relationships. Our scheme is based on two orthogonal aspects--level of detail, and approach. The resulting structure is shown in Table 1 and is explained in the body of the report. Each cell in the Table represent a different arrangement of strengths and weaknesses. Those arrangements shift gradually as one moves through the table, each cell optimal for a particular situation. The intention of this report is to enable informed use of the methods so that a method chosen is optimal for a situation given. This report imposes structure on the set of risk assessment methods in order to reveal their relationships and thus optimize their usage.We present a two-dimensional structure in the form of a matrix, using three abstraction levels for the rows and three approaches for the columns. For each of the nine cells in the matrix we identify the method type by name and example. The matrix helps the user understand: (1) what to expect from a given method, (2) how it relates to other methods, and (3) how best to use it. Each cell in the matrix represent a different arrangement of strengths and weaknesses. Those arrangements shift gradually as one moves through the table, each cell optimal for a particular situation. The intention of this report is to enable informed use of the methods so that a method chosen is optimal for a situation given. The matrix, with type names in the cells, is introduced in Table 2 on page 13 below. Unless otherwise stated we use the word 'method' in this report to refer to a 'risk assessment method', though often times we use the full phrase. The use of the terms 'risk assessment' and 'risk management' are close enough that we do not attempt to distinguish them in this report. The remainder of this report is organized as follows. In Section 2 we provide context for this report

  4. Carbon footprint assessment of Western Australian Groundwater Recycling Scheme.

    PubMed

    Simms, Andrew; Hamilton, Stacey; Biswas, Wahidul K

    2017-04-01

    This research has determined the carbon footprint or the carbon dioxide equivalent (CO2 eq) of potable water production from a groundwater recycling scheme, consisting of the Beenyup wastewater treatment plant, the Beenyup groundwater replenishment trial plant and the Wanneroo groundwater treatment plant in Western Australia, using a life cycle assessment approach. It was found that the scheme produces 1300 tonnes of CO2 eq per gigalitre (GL) of water produced, which is 933 tonnes of CO2 eq higher than the desalination plant at Binningup in Western Australia powered by 100% renewable energy generated electricity. A Monte Carlo Simulation uncertainty analysis calculated a Coefficient of Variation value of 5.4%, thus confirming the accuracy of the simulation. Electricity input accounts for 83% of the carbon dioxide equivalent produced during the production of potable water. The chosen mitigation strategy was to consider the use of renewable energy to generate electricity for carbon intensive groundwater replenishment trial plant. Depending on the local situation, a maximum of 93% and a minimum of 21% greenhouse gas saving from electricity use can be attained at groundwater replenishment trial plant by replacing grid electricity with renewable electricity. In addition, the consideration of vibrational separation (V-Sep) that helps reduce wastes generation and chemical use resulted in a 4.03 tonne of CO2 eq saving per GL of water produced by the plant.

  5. Carbon footprint assessment of Western Australian Groundwater Recycling Scheme

    NASA Astrophysics Data System (ADS)

    Simms, Andrew; Hamilton, Stacey; Biswas, Wahidul K.

    2017-04-01

    This research has determined the carbon footprint or the carbon dioxide equivalent (CO2 eq) of potable water production from a groundwater recycling scheme, consisting of the Beenyup wastewater treatment plant, the Beenyup groundwater replenishment trial plant and the Wanneroo groundwater treatment plant in Western Australia, using a life cycle assessment approach. It was found that the scheme produces 1300 tonnes of CO2 eq per gigalitre (GL) of water produced, which is 933 tonnes of CO2 eq higher than the desalination plant at Binningup in Western Australia powered by 100% renewable energy generated electricity. A Monte Carlo Simulation uncertainty analysis calculated a Coefficient of Variation value of 5.4%, thus confirming the accuracy of the simulation. Electricity input accounts for 83% of the carbon dioxide equivalent produced during the production of potable water. The chosen mitigation strategy was to consider the use of renewable energy to generate electricity for carbon intensive groundwater replenishment trial plant. Depending on the local situation, a maximum of 93% and a minimum of 21% greenhouse gas saving from electricity use can be attained at groundwater replenishment trial plant by replacing grid electricity with renewable electricity. In addition, the consideration of vibrational separation (V-Sep) that helps reduce wastes generation and chemical use resulted in a 4.03 tonne of CO2 eq saving per GL of water produced by the plant.

  6. Identification Schemes from Key Encapsulation Mechanisms

    NASA Astrophysics Data System (ADS)

    Anada, Hiroaki; Arita, Seiko

    We propose a generic conversion from a key encapsulation mechanism (KEM) to an identification (ID) scheme. The conversion derives the security for ID schemes against concurrent man-in-the-middle (cMiM) attacks from the security for KEMs against adaptive chosen ciphertext attacks on one-wayness (one-way-CCA2). Then, regarding the derivation as a design principle of ID schemes, we develop a series of concrete one-way-CCA2 secure KEMs. We start with El Gamal KEM and prove it secure against non-adaptive chosen ciphertext attacks on one-wayness (one-way-CCA1) in the standard model. Then, we apply a tag framework with the algebraic trick of Boneh and Boyen to make it one-way-CCA2 secure based on the Gap-CDH assumption. Next, we apply the CHK transformation or a target collision resistant hash function to exit the tag framework. And finally, as it is better to rely on the CDH assumption rather than the Gap-CDH assumption, we apply the Twin DH technique of Cash, Kiltz and Shoup. The application is not “black box” and we do it by making the Twin DH technique compatible with the algebraic trick. The ID schemes obtained from our KEMs show the highest performance in both computational amount and message length compared with previously known ID schemes secure against concurrent man-in-the-middle attacks.

  7. Co-Channel Speaker Separation

    DTIC Science & Technology

    1992-09-01

    Segment Classification .................... 2-8 2.3.3 Comb Filtering. . I. 2-0 2.4 Co-Channel Speaker Separation Algorithms ........... 2-9 i11 Page...4-7 4.4 Test Results ........ ......................... 4-8 4.4.1 Pitch Deviation Method of Assigning Separated Segments ...developed that if given that a segment of co-channel speech is separated into a "stronger" and "weaker" segment , the corrxt assignment of these separated

  8. Preliminary Characterization and Classification Scheme for Tectonic Structures on Enceladus

    NASA Astrophysics Data System (ADS)

    Nahm, A.; Kattenhorn, S. A.

    2013-12-01

    The ice shell of Enceladus has experienced widespread and diverse tectonic deformation. Its leading and trailing hemispheres are pervasively fractured and these are separated by older cratered terrains on the sub- and anti-Saturnian hemispheres that exhibit relatively little tectonic deformation. The south polar terrain (SPT) is tectonically complex, geologically active, and is separated from the rest of Enceladus by the south polar dichotomy. The diversity of structures visible on the surface attests to a complicated and perhaps long-lived tectonic history. Currently, no fundamental classification scheme based on formation mechanisms exists for the tectonic structures on Enceladus, as does for Europa, which limits analysis and discussion of tectonic structures and the regional and global tectonic history. Characterization and classification of structures based on their formation mechanisms allows for the stress states (orientation, magnitude, and sense) responsible for their formation to be inferred. Thus, characterizing and classifying structures on Enceladus is a major first step in understanding its tectonic history. Here, we present a preliminary global classification scheme for tectonic structures on Enceladus. The basemap used for our preliminary structure classification was the global Imaging Science Subsystem (ISS) mosaic obtained from Ciclops (110 mpp; http://www.ciclops.org/view/7590/Map_of_Enceladus_-_December_2011?js=1). The structures observed on the surface have been divided into fifteen classes based on morphology. These classes represent the diversity of structure morphology on Enceladus and include the 'tiger stripes' in the SPT, the arcuate ridges that make up the south polar dichotomy, wide fracture complexes, several classes of narrow fractures, curvilinear subparallel fractures, rifts that extend north from the SPT boundary, terrain reminiscent of Ganymede's grooved terrain, and topographic ridges with multiple orientations. The preliminary

  9. Composite separators and redox flow batteries based on porous separators

    DOEpatents

    Li, Bin; Wei, Xiaoliang; Luo, Qingtao; Nie, Zimin; Wang, Wei; Sprenkle, Vincent L.

    2016-01-12

    Composite separators having a porous structure and including acid-stable, hydrophilic, inorganic particles enmeshed in a substantially fully fluorinated polyolefin matrix can be utilized in a number of applications. The inorganic particles can provide hydrophilic characteristics. The pores of the separator result in good selectivity and electrical conductivity. The fluorinated polymeric backbone can result in high chemical stability. Accordingly, one application of the composite separators is in redox flow batteries as low cost membranes. In such applications, the composite separator can also enable additional property-enhancing features compared to ion-exchange membranes. For example, simple capacity control can be achieved through hydraulic pressure by balancing the volumes of electrolyte on each side of the separator. While a porous separator can also allow for volume and pressure regulation, in RFBs that utilize corrosive and/or oxidizing compounds, the composite separators described herein are preferable for their robustness in the presence of such compounds.

  10. Method for separating boron isotopes

    DOEpatents

    Rockwood, Stephen D.

    1978-01-01

    A method of separating boron isotopes .sup.10 B and .sup.11 B by laser-induced selective excitation and photodissociation of BCl.sub.3 molecules containing a particular boron isotope. The photodissociation products react with an appropriate chemical scavenger and the reaction products may readily be separated from undissociated BCl.sub.3, thus effecting the desired separation of the boron isotopes.

  11. Does exposure prediction bias health-effect estimation?: The relationship between confounding adjustment and exposure prediction.

    PubMed

    Cefalu, Matthew; Dominici, Francesca

    2014-07-01

    In environmental epidemiology, we are often faced with 2 challenges. First, an exposure prediction model is needed to estimate the exposure to an agent of interest, ideally at the individual level. Second, when estimating the health effect associated with the exposure, confounding adjustment is needed in the health-effects regression model. The current literature addresses these 2 challenges separately. That is, methods that account for measurement error in the predicted exposure often fail to acknowledge the possibility of confounding, whereas methods designed to control confounding often fail to acknowledge that the exposure has been predicted. In this article, we consider exposure prediction and confounding adjustment in a health-effects regression model simultaneously. Using theoretical arguments and simulation studies, we show that the bias of a health-effect estimate is influenced by the exposure prediction model, the type of confounding adjustment used in the health-effects regression model, and the relationship between these 2. Moreover, we argue that even with a health-effects regression model that properly adjusts for confounding, the use of a predicted exposure can bias the health-effect estimate unless all confounders included in the health-effects regression model are also included in the exposure prediction model. While these results of this article were motivated by studies of environmental contaminants, they apply more broadly to any context where an exposure needs to be predicted.

  12. All-optical packet header and payload separation based on two TOADs for optical packet switched networks

    NASA Astrophysics Data System (ADS)

    Ji, Wei; Zhang, Min; Ye, Peida

    2006-09-01

    We present a novel all-optical header and payload separation technique that can be utilized in Un-Slotted optical packet switched networks. The technique uses two modified TOADs, one is for packet header extraction with differential modulation scheme and the other performs a simple XOR operation between the packet and its self-derived header to get the separated payload. The main virtue of this system is simple structure and low power consumption. Through numerical simulations, the operating characteristics of the scheme are illustrated. In addition, the system parameters are discussed and designed to optimize the performance of the proposed scheme.

  13. RESONATOR PARTICLE SEPARATOR

    DOEpatents

    Blewett, J.P.; Kiesling, J.D.

    1963-06-11

    A wave-guide resonator structure is designed for use in separating particles of equal momentum but differing in mass, having energies exceeding one billion eiectron volts. The particles referred to are those of sub-atomic size and are generally produced as a result of the bombardment of a target by a beam such as protons produced in a high energy accelerator. In the resonator a travelling electric wave is produced which travels at the same rate of speed as the unwanted particle which is thus deflected continuously over the length of the resonator. The wanted particle is slightly out of phase with the travelling wave so that over the whole length of the resonator it has a net deflection of substantially zero. The travelling wave is established in a wave guide of rectangular cross section in which stubs are provided to store magnetic wave energy leaving the electric wave energy in the main structure to obtain the desired travelling wave and deflection. The stubs are of such shape and spacing to establish a critical mathemitical relationship. (AEC)

  14. RESONATOR PARTICLE SEPARATOR

    DOEpatents

    Blewett, J.P.

    1962-01-01

    A wave guide resonator structure is described for use in separating particles of equal momentum but differing in mass and having energies exceeding one billion electron volts. The particles are those of sub-atomic size and are generally produced as a result of the bombardment of a target by a beam such as protons produced in a high-energy accelerator. In this wave guide construction, the particles undergo preferential deflection as a result of the presence of an electric field. The boundary conditions established in the resonator are such as to eliminate an interfering magnetic component, and to otherwise phase the electric field to obtain a traveling wave such as one which moves at the same speed as the unwanted particle. The latter undergoes continuous deflection over the whole length of the device and is, therefore, eliminated while the wanted particle is deflected in opposite directions over the length of the resonator and is thus able to enter an exit aperture. (AEC)

  15. Organic contaminant separator

    DOEpatents

    Del Mar, P.

    1993-12-28

    A process is presented of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube. The solvent is capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus is presented for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium. The apparatus includes a composite tube comprised of a blend of a polyolefin and a polyester. The composite tube has an internal diameter of from about 0.1 to about 2.0 millimeters and has sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube. 2 figures.

  16. Organic contaminant separator

    DOEpatents

    Del Mar, Peter

    1995-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube, said solvent capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube is disclosed.

  17. Organic containment separator

    DOEpatents

    Del Mar, Peter

    1995-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube, said solvent capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube is disclosed.

  18. Organic contaminant separator

    DOEpatents

    Del Mar, Peter

    1993-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube, said solvent capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a composite tube comprised of a blend of a polyolefin and a polyester, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube is disclosed.

  19. Organic contaminant separator

    DOEpatents

    Mar, Peter D.

    1994-01-01

    A process of sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium by (a) passing an initial aqueous medium including a minor amount of the organic contaminant through a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit the organic contaminant to adhere to the composite tube, (b) passing a solvent through the composite tube, said solvent capable of separating the adhered organic contaminant from the composite tube. Further, an extraction apparatus for sample preparation prior to analysis for the concentration of an organic contaminant in an aqueous medium, said apparatus including a composite tube including a polymeric base material selected from the group of polyolefins and polyfluorocarbons and particles of a carbon allotrope material adfixed to the inner wall of the polymeric base material, the composite tube having an internal diameter of from about 0.1 to about 2.0 millimeters and being of sufficient length to permit an organic contaminant contained within an aqueous medium passed therethrough to adhere to the composite tube is disclosed.

  20. High order well-balanced schemes

    SciTech Connect

    Noelle, Sebastian; Xing, Yulong; Shu, Chi-wang

    2010-01-01

    In this paper the authors review some recent work on high-order well-balanced schemes. A characteristic feature of hyperbolic systems of balance laws is the existence of non-trivial equilibrium solutions, where the effects of convective fluxes and source terms cancel each other. Well-balanced schemes satisfy a discrete analogue of this balance and are therefore able to maintain an equilibrium state. They discuss two classes of schemes, one based on high-order accurate, non-oscillatory finite difference operators which are well-balanced for a general class of equilibria, and the other one based on well-balanced quadratures, which can - in principle - be applied to all equilibria. Applications include equilibria at rest, where the flow velocity vanishes, and also the more challenging moving flow equilibria. Numerical experiments show excellent resolution of unperturbed as well as slightly perturbed equilibria.

  1. Cooling scheme for turbine hot parts

    DOEpatents

    Hultgren, Kent Goran; Owen, Brian Charles; Dowman, Steven Wayne; Nordlund, Raymond Scott; Smith, Ricky Lee

    2000-01-01

    A closed-loop cooling scheme for cooling stationary combustion turbine components, such as vanes, ring segments and transitions, is provided. The cooling scheme comprises: (1) an annular coolant inlet chamber, situated between the cylinder and blade ring of a turbine, for housing coolant before being distributed to the turbine components; (2) an annular coolant exhaust chamber, situated between the cylinder and the blade ring and proximate the annular coolant inlet chamber, for collecting coolant exhaust from the turbine components; (3) a coolant inlet conduit for supplying the coolant to said coolant inlet chamber; (4) a coolant exhaust conduit for directing coolant from said coolant exhaust chamber; and (5) a piping arrangement for distributing the coolant to and directing coolant exhaust from the turbine components. In preferred embodiments of the invention, the cooling scheme further comprises static seals for sealing the blade ring to the cylinder and flexible joints for attaching the blade ring to the turbine components.

  2. Progressive classification scheme for document layout recognition

    NASA Astrophysics Data System (ADS)

    Minguillon, Julian; Pujol, Jaume; Zeger, Kenneth

    1999-06-01

    In this paper, we present a progressive classification scheme for a document layout recognition system using three stages. The first stages, preprocessing, extracts statistical information that may be used for background detection and removal. The second stage, a tree based classified, uses a variable block size and a set of probabilistic rules to classify segmented blocks that are independently classified. The third, state, postprocessing, uses the label map generated in the second state with a set of context rules to label unclassified blocks, trying also to solve some of the misclassification errors that may have been generated during the previous stage. The progressive scheme used in the second and third stages allows the user to stop the classification process at any block size, depending on this requirements. Experiments show that a progressive scheme combined with a set of postprocessing rules increases the percentage of correctly classified blocks and reduces the number of block computations.

  3. Scheme variations of the QCD coupling

    NASA Astrophysics Data System (ADS)

    Boito, Diogo; Jamin, Matthias; Miravitllas, Ramon

    2017-03-01

    The Quantum Chromodynamics (QCD) coupling αs is a central parameter in the Standard Model of particle physics. However, it depends on theoretical conventions related to renormalisation and hence is not an observable quantity. In order to capture this dependence in a transparent way, a novel definition of the QCD coupling, denoted by â, is introduced, whose running is explicitly renormalisation scheme invariant. The remaining renormalisation scheme dependence is related to transformations of the QCD scale Λ, and can be parametrised by a single parameter C. Hence, we call â the C-scheme coupling. The dependence on C can be exploited to study and improve perturbative predictions of physical observables. This is demonstrated for the QCD Adler function and hadronic decays of the τ lepton.

  4. Upwind and symmetric shock-capturing schemes

    NASA Technical Reports Server (NTRS)

    Yee, H. C.

    1987-01-01

    The development of numerical methods for hyperbolic conservation laws has been a rapidly growing area for the last ten years. Many of the fundamental concepts and state-of-the-art developments can only be found in meeting proceedings or internal reports. This review paper attempts to give an overview and a unified formulation of a class of shock-capturing methods. Special emphasis is on the construction of the basic nonlinear scalar second-order schemes and the methods of extending these nonlinear scalar schemes to nonlinear systems via the extact Riemann solver, approximate Riemann solvers, and flux-vector splitting approaches. Generalization of these methods to efficiently include real gases and large systems of nonequilibrium flows is discussed. The performance of some of these schemes is illustrated by numerical examples for one-, two- and three-dimensional gas dynamics problems.

  5. Vector lifting schemes for stereo image coding.

    PubMed

    Kaaniche, Mounir; Benazza-Benyahia, Amel; Pesquet-Popescu, Béatrice; Pesquet, Jean-Christophe

    2009-11-01

    Many research efforts have been devoted to the improvement of stereo image coding techniques for storage or transmission. In this paper, we are mainly interested in lossy-to-lossless coding schemes for stereo images allowing progressive reconstruction. The most commonly used approaches for stereo compression are based on disparity compensation techniques. The basic principle involved in this technique first consists of estimating the disparity map. Then, one image is considered as a reference and the other is predicted in order to generate a residual image. In this paper, we propose a novel approach, based on vector lifting schemes (VLS), which offers the advantage of generating two compact multiresolution representations of the left and the right views. We present two versions of this new scheme. A theoretical analysis of the performance of the considered VLS is also conducted. Experimental results indicate a significant improvement using the proposed structures compared with conventional methods.

  6. High efficient key-insulated attribute based encryption scheme without bilinear pairing operations.

    PubMed

    Hong, Hanshu; Sun, Zhixin

    2016-01-01

    Attribute based encryption (ABE) has been widely applied for secure data protection in various data sharing systems. However, the efficiency of existing ABE schemes is not high enough since running encrypt and decrypt algorithms need frequent bilinear pairing operations, which may occupy too much computing resources on terminal devices. What's more, since different users may share the same attributes in the system, a single user's private key exposure will threaten the security and confidentiality of the whole system. Therefore, to further decrease the computation cost in attribute based cryptosystem as well as provide secure protection when key exposure happens, in this paper, we firstly propose a high efficient key-insulated ABE algorithm without pairings. The key-insulated mechanism guarantees both forward security and backward security when key exposure or user revocation happens. Besides, during the running of algorithms in our scheme, users and attribute authority needn't run any bilinear pairing operations, which will increase the efficiency to a large extent. The high efficiency and security analysis indicate that our scheme is more appropriate for secure protection in data sharing systems.

  7. Multiscale/fractional step schemes for the numerical simulation of the rotating shallow water flows with complex periodic topography

    NASA Astrophysics Data System (ADS)

    Jauberteau, F.; Temam, R. M.; Tribbia, J.

    2014-08-01

    In this paper, we study several multiscale/fractional step schemes for the numerical solution of the rotating shallow water equations with complex topography. We consider the case of periodic boundary conditions (f-plane model). Spatial discretization is obtained using a Fourier spectral Galerkin method. For the schemes presented in this paper we consider two approaches. The first approach (multiscale schemes) is based on topography scale separation and the numerical time integration is function of the scales. The second approach is based on a splitting of the operators, and the time integration method is function of the operator considered (fractional step schemes). The numerical results obtained are compared with the explicit reference scheme (Leap-Frog scheme). With these multiscale/fractional step schemes the objective is to propose new schemes giving numerical results similar to those obtained using only one uniform fine grid N×N and a time step Δt, but with a CPU time near the CPU time needed when using only one coarse grid N1×N1, N1Δt.

  8. Generation of two-mode squeezed states for two separated atomic ensembles via coupled cavities

    SciTech Connect

    Zheng Shibiao; Yang Zhenbiao; Xia Yan

    2010-01-15

    We propose an efficient scheme for the generation of two-mode squeezed states for two separated atomic ensembles trapped in distant cavities. The scheme is based on selective couplings between the collective atomic modes and two linearly transformed common field modes mediated by an optical fiber or a third cavity. The quanta of the transformed atomic modes are exhausted due to the linear coupling with the transformed field modes, bringing the original atomic modes into the two-mode squeezed states. The experimental implementation of the scheme would be an important step toward quantum communication and networking with continuous variables.

  9. Adaptive multiresolution WENO schemes for multi-species kinematic flow models

    SciTech Connect

    Buerger, Raimund . E-mail: rburger@ing-mat.udec.cl; Kozakevicius, Alice . E-mail: alicek@smail.ufsm.br

    2007-06-10

    Multi-species kinematic flow models lead to strongly coupled, nonlinear systems of first-order, spatially one-dimensional conservation laws. The number of unknowns (the concentrations of the species) may be arbitrarily high. Models of this class include a multi-species generalization of the Lighthill-Whitham-Richards traffic model and a model for the sedimentation of polydisperse suspensions. Their solutions typically involve kinematic shocks separating areas of constancy, and should be approximated by high resolution schemes. A fifth-order weighted essentially non-oscillatory (WENO) scheme is combined with a multiresolution technique that adaptively generates a sparse point representation (SPR) of the evolving numerical solution. Thus, computational effort is concentrated on zones of strong variation near shocks. Numerical examples from the traffic and sedimentation models demonstrate the effectiveness of the resulting WENO multiresolution (WENO-MRS) scheme.

  10. A novel scheme for curved moving boundaries in the lattice Boltzmann method

    NASA Astrophysics Data System (ADS)

    Xu, Lina; Rao, Parthib; Schaefer, Laura

    2016-06-01

    We propose a novel scheme to handle moving boundaries, both straight and curved, within the lattice Boltzmann method (LBM). In this scheme, which is broadly based on the Chapman-Enskog expansion, the fictitious distributions are constructed exactly on the moving boundary. This is in contrast to existing methods where such distributions are constructed on neighboring nodes which may not lie on the moving boundary. The post-collisional distributions on the fluid nodes near the moving boundary are then constructed using first- or second-order interpolations. The proposed scheme also overcomes the requirement to have separate interpolation formulations for different values of the intersection parameter. Several validation tests presented here indicate improved accuracy and numerical stability, compliance with Galilean invariance principle, an ability to preserve the geometric fidelity of curved surfaces.

  11. Use of high-resolution upwind scheme for vortical flow simulations

    NASA Technical Reports Server (NTRS)

    Fujii, Kozo; Obayashi, Shigeru

    1988-01-01

    For vortical flow simulations at high Reynolds numbers, it is important to keep the artificial dissipation as small as possible since it induces unphysical decay of the vortex strength. One way to accomplish this is to decrease the grid spacing. Another way is to use computational schemes having little dissipation. Here, one of the high-resolution upwind schemes called MUSCL with Roe's average is applied to vortical flow fields. Two examples are considered. One is the leading-edge separation-vortex flow over a strake-delta wing. The other is a high-angle of attack supersonic flow over a spaceplane-like geometry. Comparison with the central difference solutions indicates that the present upwind scheme is less dissipative and thus has better resolution for the vortical flows.

  12. Improved second-order hyperbolic residual-distribution scheme and its extension to third-order on arbitrary triangular grids

    NASA Astrophysics Data System (ADS)

    Mazaheri, Alireza; Nishikawa, Hiroaki

    2015-11-01

    In this paper, we construct second- and third-order hyperbolic residual-distribution schemes for general advection-diffusion problems on arbitrary triangular grids. We demonstrate that the accuracy of the second-order hyperbolic schemes in [J. Comput. Phys. 227 (2007) 315-352] and [J. Comput. Phys. 229 (2010) 3989-4016] can be greatly improved by requiring the scheme to preserve exact quadratic solutions. The improved second-order scheme can be easily extended to a third-order scheme by further requiring the exactness for cubic solutions. These schemes are constructed based on the SUPG methodology formulated in the framework of the residual-distribution method, and thus can be considered as economical and powerful alternatives to high-order finite-element methods. For both second- and third-order schemes, we construct a fully implicit solver by the exact residual Jacobian of the proposed second-order scheme, and demonstrate rapid convergence, typically with no more than 10-15 Newton iterations (and about 200-800 linear relaxations per Newton iteration), to reduce the residuals by ten orders of magnitude. We also demonstrate that these schemes can be constructed based on a separate treatment of the advective and diffusive terms, which paves the way for the construction of hyperbolic residual-distribution schemes for the compressible Navier-Stokes equations. Numerical results show that these schemes produce exceptionally accurate and smooth solution gradients on highly skewed and anisotropic triangular grids even for a curved boundary problem, without introducing curved elements. A quadratic reconstruction of the curved boundary normals and a high-order integration technique on curved boundaries are also provided in details.

  13. Nickel-hydrogen separator development

    NASA Technical Reports Server (NTRS)

    Gonzalez-Sanabria, O. D.

    1986-01-01

    The separator technology is a critical element in the nickel-hydrogen (Ni-H2) systems. Previous research and development work carried out at NASA Lewis Research Center has determined that separators made from zirconium oxide (ZrO2) and potassium titanate (PKT) fibers will function satisfactorily in Ni-H2 cells without exhibiting the problems associated with the asbestos separators. These separators and their characteristics were previously discussed. A program was established to transfer the separator technology into a commercial production line. A detailed plan of this program will be presented and the preliminary results will be discussed.

  14. Rigid separator lead acid batteries

    SciTech Connect

    Cannone, A.G.; Salkind, A.J.; Stempin, J.L.; Wexell, D.R.

    1996-11-01

    Lead acid cells assembled with extruded separators displayed relatively uniform capacity and voltage parameters through 100{sup +} cycles of charge/discharge. This contrasts to failure of control cells with glass mat separators after 60 cycles. The mullite/alumina separators with 50, 60, and 70% porosity separators appear suitable for both flooded and sealed lead acid cell applications. The advantages of the rigid ceramic separators over fiber mat materials are in the uniformity of capacity and voltage, the ease of cell assembly, and the probability that firm stacking pressure on the active material will yield greater cycle life, especially at elevated temperatures.

  15. DEMONSTRATION OF HUMAN EXPOSURE TOOLS

    EPA Science Inventory

    The Human Exposure and Atmospheric Sciences Division (HEASD) of the National Exposure Research Laboratory (NERL) conducts research on exposure measurements, human activity patterns, exposure and dose models, and cumulative exposures critical for the Agency to make scientificall...

  16. Some numerical analyses of flows with separation

    NASA Astrophysics Data System (ADS)

    Kuwahara, K.

    Computational study of high Reynolds number flow with large separation is the most important problem now in computational aerodynamics. Some examples of recent results of studies of such flows are presented. The methods used are finite-difference methods and vortex methods. The first example is that of an incompressible flow past two cylinders computed by the finite-difference method based on a stream function-vorticity formulation of the Navier-Stokes equations. It is pointed out that special care must be taken to determine the boundary values of the stream function on the bodies when using this method. The second example is that of an incompressible flow past a circular cylinder at a critical Reynolds number computed by the MAC method using an improved upwind difference. The sharp drag reduction is first captured numerically by this computation. Third is an example of the simplest version of the new vortex methods without conformal mapping, which enables us to compute incompressible flows with large separation very easily and economically. The last example is of a transonic flow past an oscillating airfoil computed by the Beam-Warming scheme.

  17. Characteristics of Academic Language Register Occurring in Caretaker-Child Interaction: Development and Validation of a Coding Scheme

    ERIC Educational Resources Information Center

    Aarts, Rian; Demir, Serpil; Vallen, Ton

    2011-01-01

    This article aims at validating a coding scheme designed to investigate the precursors of academic language occurring in early caretaker-child interactions. Exposure to the academic dimensions of language is an important asset for children to be successful in academic settings. The proposed analytical framework, based on systemic functional…

  18. A COMPLETE SCHEME FOR A MUON COLLIDER.

    SciTech Connect

    PALMER,R.B.; BERG, J.S.; FERNOW, R.C.; GALLARDO, J.C.; KIRK, H.G.; ALEXAHIN, Y.; NEUFFER, D.; KAHN, S.A.; SUMMERS, D.

    2007-09-01

    A complete scheme for production, cooling, acceleration, and ring for a 1.5 TeV center of mass muon collider is presented, together with parameters for two higher energy machines. The schemes starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Six dimensional cooling in long-period helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids.

  19. High resolution schemes and the entropy condition

    NASA Technical Reports Server (NTRS)

    Osher, S.; Chakravarthy, S.

    1983-01-01

    A systematic procedure for constructing semidiscrete, second order accurate, variation diminishing, five point band width, approximations to scalar conservation laws, is presented. These schemes are constructed to also satisfy a single discrete entropy inequality. Thus, in the convex flux case, convergence is proven to be the unique physically correct solution. For hyperbolic systems of conservation laws, this construction is used formally to extend the first author's first order accurate scheme, and show (under some minor technical hypotheses) that limit solutions satisfy an entropy inequality. Results concerning discrete shocks, a maximum principle, and maximal order of accuracy are obtained. Numerical applications are also presented.

  20. Security problem on arbitrated quantum signature schemes

    SciTech Connect

    Choi, Jeong Woon; Chang, Ku-Young; Hong, Dowon

    2011-12-15

    Many arbitrated quantum signature schemes implemented with the help of a trusted third party have been developed up to now. In order to guarantee unconditional security, most of them take advantage of the optimal quantum one-time encryption based on Pauli operators. However, in this paper we point out that the previous schemes provide security only against a total break attack and show in fact that there exists an existential forgery attack that can validly modify the transmitted pair of message and signature. In addition, we also provide a simple method to recover security against the proposed attack.

  1. Fixed Wordsize Implementation of Lifting Schemes

    NASA Astrophysics Data System (ADS)

    Karp, Tanja

    2006-12-01

    We present a reversible nonlinear discrete wavelet transform with predefined fixed wordsize based on lifting schemes. Restricting the dynamic range of the wavelet domain coefficients due to a fixed wordsize may result in overflow. We show how this overflow has to be handled in order to maintain reversibility of the transform. We also perform an analysis on how large a wordsize of the wavelet coefficients is needed to perform optimal lossless and lossy compressions of images. The scheme is advantageous to well-known integer-to-integer transforms since the wordsize of adders and multipliers can be predefined and does not increase steadily. This also results in significant gains in hardware implementations.

  2. A Trade-off Traitor Tracing Scheme

    NASA Astrophysics Data System (ADS)

    Ohtake, Go; Ogawa, Kazuto; Hanaoka, Goichiro; Imai, Hideki

    There has been a wide-ranging discussion on the issue of content copyright protection in digital content distribution systems. Fiat and Tassa proposed the framework of dynamic traitor tracing. Their framework requires dynamic computation transactions according to the real-time responses of the pirate, and it presumes real-time observation of content redistribution. Therefore, it cannot be simply utilized in an application where such an assumption is not valid. In this paper, we propose a new scheme that provides the advantages of dynamic traitor tracing schemes and also overcomes their problems.

  3. How the Pharmaceutical Benefits Scheme began.

    PubMed

    Goddard, Martyn S

    2014-07-07

    Seventy years ago, the Curtin wartime government introduced legislation for a Pharmaceutical Benefits Scheme (PBS). It was a response to the need to provide access to a wave of antibiotic drugs - sulfonamides, streptomycin, penicillin - to the whole population, not only to the minority able to afford them. The scheme was immediately and successfully opposed by doctors and the conservative opposition, which saw in universal health care an underhand plan to nationalise medicine. There were two High Court challenges, two referendums and a constitutional amendment; but it was not until 1960 that Australians had the comprehensive PBS envisaged by Curtin in 1944.

  4. Persistent Neural Membrane Protein Misregulation Following Neurotoxicant Exposure

    DTIC Science & Technology

    2015-12-01

    Objectives: 1) Improve an animal model of GW chronic pain. 2) Characterize molecular changes that occur in nociceptors following exposure to pesticides...weeks after exposure to GW chemicals ended. This finding was replicated in a second group of animals . Only some of this data was reported last year...intensified protocol, in separate groups of rats, for exposures lasting either 30 or 60 days. Animals exposed to the intensified protocol for 30 days

  5. Separation of organic liquids

    SciTech Connect

    Pasternak, M.

    1993-08-24

    The method is described for concentrating a charge solution containing methanol and methyl t-butyl ether which comprises maintaining, as pervaporation membrane, a high molecular weight ion exchange resin bearing a pendant acid group, which resin is characterized by the formula: -(CF[sub 2]CF[sub 2])[sub m]-C(-CF[sub 2]-)FO(CF[sub 2]C(-CF[sub 3])FO)[sub n]CF[sub 2]CF[sub 2]SO[sub 3]-M[sup +] wherein M is a metal, said membrane having been contacted with an aqueous solution sodium chloride; maintaining a pressure drop across said pervaporation membrane; passing a charge solution containing methanol and methyl t-butyl into contact with the high pressure side of said pervaporation membrane whereby at least a portion of said methanol in said charge solution and an lesser portion of said methyl t-butyl ether pass by pervaporation through said pervaporation membrane as a lean mixture containing more methanol and less methyl t-butyl ether than are present in said charge solution and said charge solution is converted to a rich mixture containing less methanol and more methyl t-butyl ether than are present in said charge solution; recovering as permeate from the low pressure side of said pervaporation membrane said lean mixture containing a lower methanol content and a higher methyl t-butyl ether content than are present in said charge solution; recovering as retentate from the high pressure side of said pervaporation membrane said rich mixture containing less methanol and more methyl t-butyl ether than are present in said charge solution, said method enabling attainment of a balance between separation factor and flux.

  6. Student Loans Schemes in Mauritius: Experience, Analysis and Scenarios

    ERIC Educational Resources Information Center

    Mohadeb, Praveen

    2006-01-01

    This study makes a comprehensive review of the situation of student loans schemes in Mauritius, and makes recommendations, based on best practices, for setting up a national scheme that attempts to avoid weaknesses identified in some of the loans schemes of other countries. It suggests that such a scheme would be cost-effective and beneficial both…

  7. Evaluation of strategies for size based separation of polydisperse vesicle suspensions

    NASA Astrophysics Data System (ADS)

    Storslett, Kari J.; Muller, Susan J.

    2016-11-01

    Microfluidic devices can be used to separate suspensions of deformable particles with different intrinsic characteristics (e.g. size) with reasonable throughputs and without external labeling. Using vesicle suspensions to test microfluidic separation schemes provides insight into cell separation. Two schemes for separating vesicle suspensions by size are discussed: filtration and inertial focusing. The filter physically prevents most large vesicles from passing through. The filtrate is collected at one outlet and the larger vesicles are collected at another. This device showed good size separation between the two collected suspensions and was able to reduce the polydispersity of the collected suspensions relative to the original suspension. The inertial separation device was based on a design studied by Di Carlo et al.. This design was modified for our suspension and showed an ability to separate the suspension by size; however, the separated suspension's polydispersity was only slightly reduced. The advantage of the inertial separation device was its greatly increased throughput. A separation strategy may be selected based on the relative importance of high throughput vs. reduced polydispersity.

  8. All-optical packet header and payload separation for un-slotted optical packet switched networks

    NASA Astrophysics Data System (ADS)

    Ji, Wei; Zhang, Min; Ye, Peida

    2005-11-01

    A novel all-optical header and payload separation technique that can be utilized in un-slotted optical packet switched networks is presented. The technique uses a modified TOAD for packet header extraction with differential modulation scheme and two SOAs that perform a simple XOR operation between the packet and its self-derived header to get the separated payload. The main virtue of this system is simple structure and need not any additional continuous pulses. Through numerical simulations, the operating characteristics of the scheme are illustrated. In addition, the parameters of the system are discussed and designed to optimize the operation performance.

  9. Cross-ontological analytics for alignment of different classification schemes

    DOEpatents

    Posse, Christian; Sanfilippo, Antonio P; Gopalan, Banu; Riensche, Roderick M; Baddeley, Robert L

    2010-09-28

    Quantification of the similarity between nodes in multiple electronic classification schemes is provided by automatically identifying relationships and similarities between nodes within and across the electronic classification schemes. Quantifying the similarity between a first node in a first electronic classification scheme and a second node in a second electronic classification scheme involves finding a third node in the first electronic classification scheme, wherein a first product value of an inter-scheme similarity value between the second and third nodes and an intra-scheme similarity value between the first and third nodes is a maximum. A fourth node in the second electronic classification scheme can be found, wherein a second product value of an inter-scheme similarity value between the first and fourth nodes and an intra-scheme similarity value between the second and fourth nodes is a maximum. The maximum between the first and second product values represents a measure of similarity between the first and second nodes.

  10. Strong authentication scheme for telecare medicine information systems.

    PubMed

    Pu, Qiong; Wang, Jian; Zhao, Rongyong

    2012-08-01

    The telecare medicine information system enables or supports health-care delivery services. A secure authentication scheme will thus be needed to safeguard data integrity, confidentiality, and availability. In this paper, we propose a generic construction of smart-card-based password authentication protocol and prove its security. The proposed framework is superior to previous schemes in three following aspects : (1) our scheme is a true two-factor authentication scheme. (2) our scheme can yield a forward secure two-factor authentication scheme with user anonymity when appropriately instantiated. (3) our scheme utilizes each user's unique identity to accomplish the user authentication and does not need to store or verify others's certificates. And yet, our scheme is still reasonably efficient and can yield such a concrete scheme that is even more efficient than previous schemes. Therefore the end result is more practical for the telecare medicine system.

  11. Tank waste remediation system optimized processing strategy with an altered treatment scheme

    SciTech Connect

    Slaathaug, E.J.

    1996-03-01

    This report provides an alternative strategy evolved from the current Hanford Site Tank Waste Remediation System (TWRS) programmatic baseline for accomplishing the treatment and disposal of the Hanford Site tank wastes. This optimized processing strategy with an altered treatment scheme performs the major elements of the TWRS Program, but modifies the deployment of selected treatment technologies to reduce the program cost. The present program for development of waste retrieval, pretreatment, and vitrification technologies continues, but the optimized processing strategy reuses a single facility to accomplish the separations/low-activity waste (LAW) vitrification and the high-level waste (HLW) vitrification processes sequentially, thereby eliminating the need for a separate HLW vitrification facility.

  12. Creating Culturally Sustainable Agri-Environmental Schemes

    ERIC Educational Resources Information Center

    Burton, Rob J. F.; Paragahawewa, Upananda Herath

    2011-01-01

    Evidence is emerging from across Europe that contemporary agri-environmental schemes are having only limited, if any, influence on farmers' long-term attitudes towards the environment. In this theoretical paper we argue that these approaches are not "culturally sustainable," i.e. the actions are not becoming embedded within farming…

  13. Tunneling and the Emergent Universe Scheme

    NASA Astrophysics Data System (ADS)

    Labraña, Pedro

    We present an alternative scheme for an Emergent Universe scenario, developed previously in Phys. Rev. D 86, 083524 (2012), where the universe is initially in a static state supported by a scalar field located in a false vacuum. The universe begins to evolve when, by quantum tunneling, the scalar field decays into a state of true vacuum.

  14. [Modern scheme for the diagnosis of staphylococci].

    PubMed

    Skalka, B

    1985-08-01

    A simplified scheme for the subdivision of coagulase-positive staphylococci and another simplified scheme for the diagnostics of coagulase-negative species were worked out. On the basis of the production of staphylokinase, coagulation of human and bovine plasma, acetoin production from glucose, and growth on agar with crystal violet, it is possible to identify S. aureus with its biovars A, B, C1, C2, D, as well as S. intermedius. The coagulase-negative species can be diagnosed according to their sensitivity to novobiocin, nitrate reduction, fermentation of maltose, sucrose, salicin, xylose, trehalose, mannitol and mannose, and haemolytic activity. The proposed diagnostic schemes were verified with success on the collection strains and on the 1305 staphylococci strains isolated largely from the bovine mammary gland, from dogs, man and domestic fowl. In S. aureus strains a close correlation was demonstrated between their biotype characteristics and the host species. A similar correlation was determined for S. intermedius. As to the coagulase-negative species, S. epidermidis, S. hominis and S. haemolyticus were diagnosed most frequently. Both schemes represent a reliable, prompt and technically simple method of the diagnostics of the Staphylococcus microorganisms.

  15. Experimental Evaluation of LIDAR Data Visualization Schemes

    NASA Astrophysics Data System (ADS)

    Ghosh, S.; Lohan, B.

    2012-07-01

    LiDAR (Light Detection and Ranging) has attained the status of an industry standard method of data collection for gathering three dimensional topographic information. Datasets captured through LiDAR are dense, redundant and are perceivable from multiple directions, which is unlike other geospatial datasets collected through conventional methods. This three dimensional information has triggered an interest in the scientific community to develop methods for visualizing LiDAR datasets and value added products. Elementary schemes of visualization use point clouds with intensity or colour, triangulation and tetrahedralization based terrain models draped with texture. Newer methods use feature extraction either through the process of classification or segmentation. In this paper, the authors have conducted a visualization experience survey where 60 participants respond to a questionnaire. The questionnaire poses six different questions on the qualities of feature perception and depth for 12 visualization schemes. The answers to these questions are obtained on a scale of 1 to 10. Results are thus presented using the non-parametric Friedman's test, using post-hoc analysis for hypothetically ranking the visualization schemes based on the rating received and finally confirming the rankings through the Page's trend test. Results show that a heuristic based visualization scheme, which has been developed by Ghosh and Lohani (2011) performs the best in terms of feature and depth perception.

  16. A new scheme of force reflecting control

    NASA Technical Reports Server (NTRS)

    Kim, Won S.

    1992-01-01

    A new scheme of force reflecting control has been developed that incorporates position-error-based force reflection and robot compliance control. The operator is provided with a kinesthetic force feedback which is proportional to the position error between the operator-commanded and the actual position of the robot arm. Robot compliance control, which increases the effective compliance of the robot, is implemented by low pass filtering the outputs of the force/torque sensor mounted on the base of robot hand and using these signals to alter the operator's position command. This position-error-based force reflection scheme combined with shared compliance control has been implemented successfully to the Advanced Teleoperation system consisting of dissimilar master-slave arms. Stability measurements have demonstrated unprecedentedly high force reflection gains of up to 2 or 3, even though the slave arm is much stiffer than operator's hand holding the force reflecting hand controller. Peg-in-hole experiments were performed with eight different operating modes to evaluate the new force-reflecting control scheme. Best task performance resulted with this new control scheme.

  17. A Simplified Scheme for Kinematic Source Inversion

    NASA Astrophysics Data System (ADS)

    Iglesias, A.; Castro-Artola, O.; Singh, S.; Hjorleifsdottir, V.; Legrand, D.

    2013-05-01

    It is well known that different kinematic source inversion schemes lead to non-unique solutions. For this reason, a simplified scheme, which yields the main characteristics of the rupture process, rather than the details, may be desirable. In this work we propose a modification of the frequency-domain inversion scheme of Cotton & Campillo (1995) to extract kinematic parameters using simplified geometries (ellipses). The forward problem is re-parameterized by including one or two ellipses in which the displacement is smoothly distributed. For the ellipses we invert for the position of the centers within the fault plane, the major and minor semi-axes, the maximum displacements, the angles of rotation and a parameter that controls the distribution of slip. A simulated annealing scheme is used to invert near-source displacements. We first test the method on synthetic displacement records corresponding to the Guerrero-Oaxaca earthquake (20/03/2012, Mw=7.5) by comparing the results obtained from the modified technique with the original method. In the next step, we use displacements obtained by double numerical integration of recorded accelerograms. We find that, in spite of the simple geometry, the modified method leads to a good fit between observed and synthetic displacements and recovers the main rupture characteristics.

  18. High Order Semi-Lagrangian Advection Scheme

    NASA Astrophysics Data System (ADS)

    Malaga, Carlos; Mandujano, Francisco; Becerra, Julian

    2014-11-01

    In most fluid phenomena, advection plays an important roll. A numerical scheme capable of making quantitative predictions and simulations must compute correctly the advection terms appearing in the equations governing fluid flow. Here we present a high order forward semi-Lagrangian numerical scheme specifically tailored to compute material derivatives. The scheme relies on the geometrical interpretation of material derivatives to compute the time evolution of fields on grids that deform with the material fluid domain, an interpolating procedure of arbitrary order that preserves the moments of the interpolated distributions, and a nonlinear mapping strategy to perform interpolations between undeformed and deformed grids. Additionally, a discontinuity criterion was implemented to deal with discontinuous fields and shocks. Tests of pure advection, shock formation and nonlinear phenomena are presented to show performance and convergence of the scheme. The high computational cost is considerably reduced when implemented on massively parallel architectures found in graphic cards. The authors acknowledge funding from Fondo Sectorial CONACYT-SENER Grant Number 42536 (DGAJ-SPI-34-170412-217).

  19. Configuration-Control Scheme Copes With Singularities

    NASA Technical Reports Server (NTRS)

    Seraji, Homayoun; Colbaugh, Richard D.

    1993-01-01

    Improved configuration-control scheme for robotic manipulator having redundant degrees of freedom suppresses large joint velocities near singularities, at expense of small trajectory errors. Provides means to enforce order of priority of tasks assigned to robot. Basic concept of configuration control of redundant robot described in "Increasing The Dexterity Of Redundant Robots" (NPO-17801).

  20. Harmonic generation with multiple wiggler schemes

    SciTech Connect

    Bonifacio, R.; De Salvo, L.; Pierini, P.

    1995-02-01

    In this paper the authors give a simple theoretical description of the basic physics of the single pass high gain free electron laser (FEL), describing in some detail the FEL bunching properties and the harmonic generation technique with a multiple-wiggler scheme or a high gain optical klystron configuration.

  1. A relocation-based initialization scheme to improve track-forecasting of tropical cyclones

    NASA Astrophysics Data System (ADS)

    Gao, Feng; Childs, Peter P.; Huang, Xiang-Yu; Jacobs, Neil A.; Min, Jinzhong

    2014-01-01

    A relocation procedure to initialize tropical cyclones was developed to improve the representation of the initial conditions and the track forecast for Panasonic Weather Solutions Tropical Operational Forecasts. This scheme separates the vortex perturbation and environment field from the first guess, then relocates the initial vortex perturbations to the observed position by merging them with the environment field. The relationships of wind vector components with stream function and velocity potential are used for separating the vortex disturbance from first guess. For the separation of scalars, a low-pass Barnes filter is employed. The irregular-shaped relocation area corresponding to the specific initial conditions is determined by mapping the edge of the vortex radius in 36 directions. Then, the non-vortex perturbations in the relocation area are removed by a two-pass Barnes filter to retain the vortex perturbations, while the variable fields outside the perimeter of the modified vortex are kept identical to the original first guess. The potential impacts of this scheme on track forecasts were examined for three hurricane cases in the 2011-12 hurricane season. The experimental results demonstrate that the initialization scheme is able to effectively separate the vortex field from the environment field and maintain a relatively balanced and accurate relocated first guess. As the initial track error is reduced, the following track forecasts are considerably improved. The 72-h average track forecast error was reduced by 32.6% for the cold-start cases, and by 38.4% when using the full-cycling data assimilation because of the accumulated improvements from the initialization scheme.

  2. Monitoring and modelling of exposure to ethanol in hairdressing salons.

    PubMed

    van Muiswinkel, W J; Kromhout, H; Onos, T; Kersemaekers, W

    1997-04-01

    Personal exposure to solvents was studied among hairdressers in 28 salons in two regions during two seasons in The Netherlands. Ethanol was used as a marker for solvent exposure. Auxiliary data, such as salon and work characteristics, meteorological conditions and information on the presence of control measures, were collected during the measurements. The average exposure to ethanol was almost a factor of 200 below the occupational exposure limit, but differences in average ethanol concentrations up to a factor of 30 were present between salons. Exposure concentrations were significantly higher on Fridays than on other days of the week. Contrary to expectation, exposures were somewhat lower in the spring than in the summer and in an urban than a semi-rural area. An empirical statistical model based on exposure data collected during the first measurement period appeared not to be valid for the encountered circumstances in the second measurement period. An alternative classification scheme based on two easily obtainable salon and task characteristics was elaborated. This scheme will be applied in an ongoing epidemiological study on reproductive disorders among hairdressers and their offspring.

  3. Quantum Walk Schemes for Universal Quantum Computation

    NASA Astrophysics Data System (ADS)

    Underwood, Michael S.

    Random walks are a powerful tool for the efficient implementation of algorithms in classical computation. Their quantum-mechanical analogues, called quantum walks, hold similar promise. Quantum walks provide a model of quantum computation that has recently been shown to be equivalent in power to the standard circuit model. As in the classical case, quantum walks take place on graphs and can undergo discrete or continuous evolution, though quantum evolution is unitary and therefore deterministic until a measurement is made. This thesis considers the usefulness of continuous-time quantum walks to quantum computation from the perspectives of both their fundamental power under various formulations, and their applicability in practical experiments. In one extant scheme, logical gates are effected by scattering processes. The results of an exhaustive search for single-qubit operations in this model are presented. It is shown that the number of distinct operations increases exponentially with the number of vertices in the scattering graph. A catalogue of all graphs on up to nine vertices that implement single-qubit unitaries at a specific set of momenta is included in an appendix. I develop a novel scheme for universal quantum computation called the discontinuous quantum walk, in which a continuous-time quantum walker takes discrete steps of evolution via perfect quantum state transfer through small 'widget' graphs. The discontinuous quantum-walk scheme requires an exponentially sized graph, as do prior discrete and continuous schemes. To eliminate the inefficient vertex resource requirement, a computation scheme based on multiple discontinuous walkers is presented. In this model, n interacting walkers inhabiting a graph with 2n vertices can implement an arbitrary quantum computation on an input of length n, an exponential savings over previous universal quantum walk schemes. This is the first quantum walk scheme that allows for the application of quantum error correction

  4. Three-dimensional compression scheme based on wavelet transform

    NASA Astrophysics Data System (ADS)

    Yang, Wu; Xu, Hui; Liao, Mengyang

    1999-03-01

    In this paper, a 3D compression method based on separable wavelet transform is discussed in detail. The most commonly used digital modalities generate multiple slices in a single examination, which are normally anatomically or physiologically correlated to each other. 3D wavelet compression methods can achieve more efficient compression by exploring the correlation between slices. The first step is based on a separable 3D wavelet transform. Considering the difference between pixel distances within a slice and those between slices, one biorthogonal Antoninin filter bank is applied within 2D slices and a second biorthogonal Villa4 filter bank on the slice direction. Then, S+P transform is applied in the low-resolution wavelet components and an optimal quantizer is presented after analysis of the quantization noise. We use an optimal bit allocation algorithm, which, instead of eliminating the coefficients of high-resolution components in smooth areas, minimizes the system reconstruction distortion at a given bit-rate. Finally, to remain high coding efficiency and adapt to different properties of each component, a comprehensive entropy coding method is proposed, in which arithmetic coding method is applied in high-resolution components and adaptive Huffman coding method in low-resolution components. Our experimental results are evaluated by several image measures and our 3D wavelet compression scheme is proved to be more efficient than 2D wavelet compression.

  5. Finite difference schemes for long-time integration

    NASA Technical Reports Server (NTRS)

    Haras, Zigo; Taasan, Shlomo

    1993-01-01

    Finite difference schemes for the evaluation of first and second derivatives are presented. These second order compact schemes were designed for long-time integration of evolution equations by solving a quadratic constrained minimization problem. The quadratic cost function measures the global truncation error while taking into account the initial data. The resulting schemes are applicable for integration times fourfold, or more, longer than similar previously studied schemes. A similar approach was used to obtain improved integration schemes.

  6. Simple Numerical Schemes for the Korteweg-deVries Equation

    SciTech Connect

    C. J. McKinstrie; M. V. Kozlov

    2000-12-01

    Two numerical schemes, which simulate the propagation of dispersive non-linear waves, are described. The first is a split-step Fourier scheme for the Korteweg-de Vries (KdV) equation. The second is a finite-difference scheme for the modified KdV equation. The stability and accuracy of both schemes are discussed. These simple schemes can be used to study a wide variety of physical processes that involve dispersive nonlinear waves.

  7. High-resolution schemes for hyperbolic conservation laws

    NASA Technical Reports Server (NTRS)

    Harten, A.

    1982-01-01

    A class of new explicit second order accurate finite difference schemes for the computation of weak solutions of hyperbolic conservation laws is presented. These highly nonlinear schemes are obtained by applying a nonoscillatory first order accurae scheme to an appropriately modified flux function. The so derived second order accurate schemes achieve high resolution while preserving the robustness of the original nonoscillatory first order accurate scheme.

  8. Dioxin Exposure Initiative

    EPA Pesticide Factsheets

    The Dioxin Exposure Initiative (DEI) is no longer active. This page contains a summary of the dioxin exposure initiative with illustrations, contact and background information.Originally supported by scientist Matthew Lorber, who retired in Mar 2017.

  9. National Exposure Research Laboratory

    EPA Pesticide Factsheets

    The Ecosystems Research Division of EPA’s National Exposure Research Laboratory, conducts research on organic and inorganic chemicals, greenhouse gas biogeochemical cycles, and land use perturbations that create stressor exposures and potentia risk

  10. CHAPTER ONE: EXPOSURE MEASUREMENTS.

    EPA Science Inventory

    Determining human exposure to suspended particualte concentrations requires measurements that quantify different particle properties in microenvironments where people live, work, and play. Particle mass, size, and chemical composition are important exposure variables, and these ...

  11. Integrated Exposure Assessment Monitoring.

    ERIC Educational Resources Information Center

    Behar, Joseph V.; And Others

    1979-01-01

    Integrated Exposure Assessment Monitoring is the coordination of environmental (air, water, land, and crops) monitoring networks to collect systematically pollutant exposure data for a specific receptor, usually man. (Author/BB)

  12. Particle exposures and infections

    EPA Science Inventory

    Particle exposures increase the risk for human infections. Particles can deposit in the nose, pharynx, larynx, trachea, bronchi, and distal lung and, accordingly, the respiratory tract is the system most frequently infected after such exposure; however, meningitis also occurs. Ci...

  13. Occupational Noise Exposure

    MedlinePlus

    ... is pervasive. It is also preventable. More Exposure & Controls Exposure to loud noise kills the nerve endings ... endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or ...

  14. EPIDEMIOLOGY AND EXPOSURE ASSESSMENT

    EPA Science Inventory

    Research collaborations between the National Health and Environmental Effects Research Laboratory (NHEERL) and the National Exposure Research Laboratory (NERL) centered on the development and application of exposure analysis tools in environmental epidemiology include the El Paso...

  15. Prenatal radiation exposure: dose calculation.

    PubMed

    Scharwächter, C; Röser, A; Schwartz, C A; Haage, P

    2015-05-01

    The unborn child requires special protection. In this context, the indication for an X-ray examination is to be checked critically. If thereupon radiation of the lower abdomen including the uterus cannot be avoided, the examination should be postponed until the end of pregnancy or alternative examination techniques should be considered. Under certain circumstances, either accidental or in unavoidable cases after a thorough risk assessment, radiation exposure of the unborn may take place. In some of these cases an expert radiation hygiene consultation may be required. This consultation should comprise the expected risks for the unborn while not perturbing the mother or the involved medical staff. For the risk assessment in case of an in-utero x-ray exposition deterministic damages with a defined threshold dose are distinguished from stochastic damages without a definable threshold dose. The occurrence of deterministic damages depends on the dose and the developmental stage of the unborn at the time of radiation. To calculate the risks of an in-utero radiation exposure a three-stage concept is commonly applied. Depending on the amount of radiation, the radiation dose is either estimated, roughly calculated using standard tables or, in critical cases, accurately calculated based on the individual event. The complexity of the calculation thereby increases from stage to stage. An estimation based on stage one is easily feasible whereas calculations based on stages two and especially three are more complex and often necessitate execution by specialists. This article demonstrates in detail the risks for the unborn child pertaining to its developmental phase and explains the three-stage concept as an evaluation scheme. It should be noted, that all risk estimations are subject to considerable uncertainties. • Radiation exposure of the unborn child can result in both deterministic as well as stochastic damage und hitherto should be avoided or reduced to a minimum

  16. Uplink Access Schemes for LTE-Advanced

    NASA Astrophysics Data System (ADS)

    Liu, Le; Inoue, Takamichi; Koyanagi, Kenji; Kakura, Yoshikazu

    The 3GPP LTE-Advanced has been attracting much attention recently, where the channel bandwidth would be beyond the maximum bandwidth of LTE, 20MHz. In LTE, single carrier-frequency division multiple access (SC-FDMA) was accepted as the uplink access scheme due to its advantage of very low cubic metric (CM). For LTE-A wideband transmission, multicarrier access would be more effective than single carrier access to make use of multi-user diversity and can maintain the physical channel structure of LTE, where the control information is transmitted on the edges of each 20MHz. In this paper, we discuss the access schemes in bandwidth under 20MHz as well as over 20MHz. In the case of bandwidth under 20MHz, we propose the access schemes allowing discontinuous resource allocation to enhance average throughput while maintaining cell-edge user throughput, that is, DFT-spread-OFDM with spectrum division control (SDC) and adaptive selection of SC-FDMA and OFDM (SC+OFDM). The number of discontinuous spectrums is denoted as spectrum division (SD). For DFT-S-OFDM, we define a parameter max SD as the upper limit of SD. We evaluate our proposed schemes in bandwidth under 20MHz and find that SC+OFDM as well as SDC with common max SD or UE-specific max SD can improve average throughput while their cell-edge user throughput can approach that of SC-FDMA. In the case of bandwidth over 20MHz, we consider key factors to decide a feasible access scheme for aggregating several 20MHz-wide bands.

  17. Electricity storage using a thermal storage scheme

    NASA Astrophysics Data System (ADS)

    White, Alexander

    2015-01-01

    The increasing use of renewable energy technologies for electricity generation, many of which have an unpredictably intermittent nature, will inevitably lead to a greater demand for large-scale electricity storage schemes. For example, the expanding fraction of electricity produced by wind turbines will require either backup or storage capacity to cover extended periods of wind lull. This paper describes a recently proposed storage scheme, referred to here as Pumped Thermal Storage (PTS), and which is based on "sensible heat" storage in large thermal reservoirs. During the charging phase, the system effectively operates as a high temperature-ratio heat pump, extracting heat from a cold reservoir and delivering heat to a hot one. In the discharge phase the processes are reversed and it operates as a heat engine. The round-trip efficiency is limited only by process irreversibilities (as opposed to Second Law limitations on the coefficient of performance and the thermal efficiency of the heat pump and heat engine respectively). PTS is currently being developed in both France and England. In both cases, the schemes operate on the Joule-Brayton (gas turbine) cycle, using argon as the working fluid. However, the French scheme proposes the use of turbomachinery for compression and expansion, whereas for that being developed in England reciprocating devices are proposed. The current paper focuses on the impact of the various process irreversibilities on the thermodynamic round-trip efficiency of the scheme. Consideration is given to compression and expansion losses and pressure losses (in pipe-work, valves and thermal reservoirs); heat transfer related irreversibility in the thermal reservoirs is discussed but not included in the analysis. Results are presented demonstrating how the various loss parameters and operating conditions influence the overall performance.

  18. Electricity storage using a thermal storage scheme

    SciTech Connect

    White, Alexander

    2015-01-22

    The increasing use of renewable energy technologies for electricity generation, many of which have an unpredictably intermittent nature, will inevitably lead to a greater demand for large-scale electricity storage schemes. For example, the expanding fraction of electricity produced by wind turbines will require either backup or storage capacity to cover extended periods of wind lull. This paper describes a recently proposed storage scheme, referred to here as Pumped Thermal Storage (PTS), and which is based on “sensible heat” storage in large thermal reservoirs. During the charging phase, the system effectively operates as a high temperature-ratio heat pump, extracting heat from a cold reservoir and delivering heat to a hot one. In the discharge phase the processes are reversed and it operates as a heat engine. The round-trip efficiency is limited only by process irreversibilities (as opposed to Second Law limitations on the coefficient of performance and the thermal efficiency of the heat pump and heat engine respectively). PTS is currently being developed in both France and England. In both cases, the schemes operate on the Joule-Brayton (gas turbine) cycle, using argon as the working fluid. However, the French scheme proposes the use of turbomachinery for compression and expansion, whereas for that being developed in England reciprocating devices are proposed. The current paper focuses on the impact of the various process irreversibilities on the thermodynamic round-trip efficiency of the scheme. Consideration is given to compression and expansion losses and pressure losses (in pipe-work, valves and thermal reservoirs); heat transfer related irreversibility in the thermal reservoirs is discussed but not included in the analysis. Results are presented demonstrating how the various loss parameters and operating conditions influence the overall performance.

  19. An optimal nonorthogonal separation of the anisotropic Gaussian convolution filter.

    PubMed

    Lampert, Christoph H; Wirjadi, Oliver

    2006-11-01

    We give an analytical and geometrical treatment of what it means to separate a Gaussian kernel along arbitrary axes in R(n), and we present a separation scheme that allows us to efficiently implement anisotropic Gaussian convolution filters for data of arbitrary dimensionality. Based on our previous analysis we show that this scheme is optimal with regard to the number of memory accesses and interpolation operations needed. The proposed method relies on nonorthogonal convolution axes and works completely in image space. Thus, it avoids the need for a fast Fourier transform (FFT)-subroutine. Depending on the accuracy and speed requirements, different interpolation schemes and methods to implement the one-dimensional Gaussian (finite impulse response and infinite impulse response) can be integrated. Special emphasis is put on analyzing the performance and accuracy of the new method. In particular, we show that without any special optimization of the source code, it can perform anisotropic Gaussian filtering faster than methods relying on the FFT.

  20. Optical subcarrier generation and multiplexing scheme for all-optical networks

    NASA Astrophysics Data System (ADS)

    Sanchez, Sonia; Donkor, Eric

    2001-07-01

    There is demand for high-sped all-optical networks for the next generation internet that can transport the data header and packet of information at rates of between 40-100 Gb/s. Such networks will require high bandwidth and high-speed data transport. DWFM has been proposed as a viable scheme to implement such networks. Recently we reported the generation of optical subcarrier frequencies having bandwidth of the order of 2.5-3 terahertz. We prose a scheme for the design of high-density optical networks, in which the header is carried over the subcarrier frequencies and the packets are carried over the optical wavelengths. This scheme has many advantages, for example, it can allow for separate processing of header and packet, as well as provide higher bandwidth and high-speed data transport. We shall discuss the generation scheme for the terahertz optical subcarriers, a modulation scheme for these carriers, and how they are multiplexed in an all-optical network architecture.