Influence of mobile phone traffic on base station exposure of the general public.

PubMed

Joseph, Wout; Verloock, Leen

2010-11-01

The influence of mobile phone traffic on temporal radiofrequency exposure due to base stations during 7 d is compared for five different sites with Erlang data (representing average mobile phone traffic intensity during a period of time). The time periods of high exposure and high traffic during a day are compared and good agreement is obtained. The minimal required measurement periods to obtain accurate estimates for maximal and average long-period exposure (7 d) are determined. It is shown that these periods may be very long, indicating the necessity of new methodologies to estimate maximal and average exposure from short-period measurement data. Therefore, a new method to calculate the fields at a time instant from fields at another time instant using normalized Erlang values is proposed. This enables the estimation of maximal and average exposure during a week from short-period measurements using only Erlang data and avoids the necessity of long measurement times.

Impacts of environment on human diseases: a web service for the human exposome

NASA Astrophysics Data System (ADS)

Karssenberg, Derek; Vaartjes, Ilonca; Kamphuis, Carlijn; Strak, Maciek; Schmitz, Oliver; Soenario, Ivan; de Jong, Kor

2017-04-01

The exposome is the totality of human environmental exposures from conception onwards. Identifying the contribution of the exposome to human diseases and health is a key issue in health research. Examples include the effect of air pollution exposure on cardiovascular diseases, the impact of disease vectors (mosquitos) and surface hydrology exposure on malaria, and the effect of fast food restaurant exposure on obesity. Essential to health research is to disentangle the effects of the exposome and genome on health. Ultimately this requires quantifying the totality of all human exposures, for each individual in the studied human population. This poses a massive challenge to geoscientists, as environmental data are required at a high spatial and temporal resolution, with a large spatial and temporal coverage representing the area inhabited by the population studied and the time span representing several decades. Then, these data need to be combined with space-time paths of individuals to calculate personal exposures for each individual in the population. The Global and Geo Health Data Centre is taking this challenge by providing a web service capable of enriching population data with exposome information. Our web service can generate environmental information either from archived national (up to 5 m spatial and 1 h temporal resolution) and global environmental information or generated on the fly using environmental models running as microservices. On top of these environmental data services runs an individual exposure service enabling health researchers to select different spatial and temporal aggregation methods and to upload space-time paths of individuals. These are then enriched with personal exposures and eventually returned to the user. We illustrate the service in an example of individual exposures to air pollutants calculated from hyper resolution air pollution data and various approaches to estimate space-time paths of individuals.

Wait, are you sad or angry? Large exposure time differences required for the categorization of facial expressions of emotion

PubMed Central

Du, Shichuan; Martinez, Aleix M.

2013-01-01

Abstract Facial expressions of emotion are essential components of human behavior, yet little is known about the hierarchical organization of their cognitive analysis. We study the minimum exposure time needed to successfully classify the six classical facial expressions of emotion (joy, surprise, sadness, anger, disgust, fear) plus neutral as seen at different image resolutions (240 × 160 to 15 × 10 pixels). Our results suggest a consistent hierarchical analysis of these facial expressions regardless of the resolution of the stimuli. Happiness and surprise can be recognized after very short exposure times (10–20 ms), even at low resolutions. Fear and anger are recognized the slowest (100–250 ms), even in high-resolution images, suggesting a later computation. Sadness and disgust are recognized in between (70–200 ms). The minimum exposure time required for successful classification of each facial expression correlates with the ability of a human subject to identify it correctly at low resolutions. These results suggest a fast, early computation of expressions represented mostly by low spatial frequencies or global configural cues and a later, slower process for those categories requiring a more fine-grained analysis of the image. We also demonstrate that those expressions that are mostly visible in higher-resolution images are not recognized as accurately. We summarize implications for current computational models. PMID:23509409

Time reducing exposure containing 18 fluorine flourodeoxyglucose master vial dispensing in hot lab: Omega technique

PubMed Central

Rao, Vatturi Venkata Satya Prabhakar; Manthri, Ranadheer; Hemalatha, Pottumuthu; Kumar, Vuyyuru Navin; Azhar, Mohammad

2016-01-01

Hot lab dispensing of large doses of 18 fluorine fluorodeoxyglucose in master vials supplied from the cyclotrons requires high degrees of skill to handle high doses. Presently practiced conventional method of fractionating from the inverted tiltable vial pig mounted on a metal frame has its own limitations such as increasing isotope handling times and exposure to the technologist. Innovative technique devised markedly improves the fractionating efficiency along with speed, precision, and reduced dose exposure. PMID:27095872

Measurement errors in the assessment of exposure to solar ultraviolet radiation and its impact on risk estimates in epidemiological studies.

PubMed

Dadvand, Payam; Basagaña, Xavier; Barrera-Gómez, Jose; Diffey, Brian; Nieuwenhuijsen, Mark

2011-07-01

To date, many studies addressing long-term effects of ultraviolet radiation (UVR) exposure on human health have relied on a range of surrogates such as the latitude of the city of residence, ambient UVR levels, or time spent outdoors to estimate personal UVR exposure. This study aimed to differentiate the contributions of personal behaviour and ambient UVR levels on facial UVR exposure and to evaluate the impact of using UVR exposure surrogates on detecting exposure-outcome associations. Data on time-activity, holiday behaviour, and ambient UVR levels were obtained for adult (aged 25-55 years old) indoor workers in six European cities: Athens (37°N), Grenoble (45°N), Milan (45°N), Prague (50°N), Oxford (52°N), and Helsinki (60°N). Annual UVR facial exposure levels were simulated for 10,000 subjects for each city, using a behavioural UVR exposure model. Within-city variations of facial UVR exposure were three times larger than the variation between cities, mainly because of time-activity patterns. In univariate models, ambient UVR levels, latitude and time spent outdoors, each accounted for less than one fourth of the variation in facial exposure levels. Use of these surrogates to assess long-term exposure to UVR resulted in requiring more than four times more participants to achieve similar statistical power to the study that applied simulated facial exposure. Our results emphasise the importance of integrating both personal behaviour and ambient UVR levels/latitude in exposure assessment methodologies.

Euthanasia of neonatal mice with carbon dioxide

USGS Publications Warehouse

Pritchett, K.; Corrow, D.; Stockwell, J.; Smith, A.

2005-01-01

Exposure to carbon dioxide (CO2) is the most prevalent method used to euthanize rodents in biomedical research. The purpose of this study was to determine the time of CO2 exposure required to euthanize neonatal mice (0 to 10 days old). Multiple groups of mice were exposed to 100% CO 2 for time periods between 5 and 60 min. Mice were placed in room air for 10 or 20 min after CO2 exposure, to allow for the chance of recovery. If mice recovered at one time point, a longer exposure was examined. Inbred and outbred mice were compared. Results of the study indicated that time to death varied with the age of the animals and could be as long as 50 min on the day of birth and differed between inbred and outbred mice. Institutions euthanizing neonatal mice with CO2 may wish to adjust their CO 2 exposure time periods according the age of the mice and their genetic background. Copyright 2005 by the American Association for Laboratory Animal Science.

Analyzing workplace exposures using direct reading instruments and video exposure monitoring techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gressel, M.G.; Heitbrink, W.A.; Jensen, P.A.

1992-08-01

The techniques for conducting video exposure monitoring were described along with the equipment required to monitor and record worker breathing zone concentrations, the analysis of the real time exposure data using video recordings, and the use of real time concentration data from a direct reading instrument to determine the effective ventilation rate and the mixing factor of a given room at a specific time. Case studies which made use of video exposure monitoring techniques to provide information not available through integrated sampling were also discussed. The process being monitored and the methodology used to monitor the exposures were described formore » each of the case studies. The case studies included manual material weigh out, ceramic casting cleaning, dumping bags of powdered materials, furniture stripping, administration of nitrous-oxide during dental procedures, hand held sanding operation, methanol exposures in maintenance garages, brake servicing, bulk loading of railroad cars and trucks, and grinding operations.« less

Modelling survival: exposure pattern, species sensitivity and uncertainty.

PubMed

Ashauer, Roman; Albert, Carlo; Augustine, Starrlight; Cedergreen, Nina; Charles, Sandrine; Ducrot, Virginie; Focks, Andreas; Gabsi, Faten; Gergs, André; Goussen, Benoit; Jager, Tjalling; Kramer, Nynke I; Nyman, Anna-Maija; Poulsen, Veronique; Reichenberger, Stefan; Schäfer, Ralf B; Van den Brink, Paul J; Veltman, Karin; Vogel, Sören; Zimmer, Elke I; Preuss, Thomas G

2016-07-06

The General Unified Threshold model for Survival (GUTS) integrates previously published toxicokinetic-toxicodynamic models and estimates survival with explicitly defined assumptions. Importantly, GUTS accounts for time-variable exposure to the stressor. We performed three studies to test the ability of GUTS to predict survival of aquatic organisms across different pesticide exposure patterns, time scales and species. Firstly, using synthetic data, we identified experimental data requirements which allow for the estimation of all parameters of the GUTS proper model. Secondly, we assessed how well GUTS, calibrated with short-term survival data of Gammarus pulex exposed to four pesticides, can forecast effects of longer-term pulsed exposures. Thirdly, we tested the ability of GUTS to estimate 14-day median effect concentrations of malathion for a range of species and use these estimates to build species sensitivity distributions for different exposure patterns. We find that GUTS adequately predicts survival across exposure patterns that vary over time. When toxicity is assessed for time-variable concentrations species may differ in their responses depending on the exposure profile. This can result in different species sensitivity rankings and safe levels. The interplay of exposure pattern and species sensitivity deserves systematic investigation in order to better understand how organisms respond to stress, including humans.

Modelling survival: exposure pattern, species sensitivity and uncertainty

NASA Astrophysics Data System (ADS)

Ashauer, Roman; Albert, Carlo; Augustine, Starrlight; Cedergreen, Nina; Charles, Sandrine; Ducrot, Virginie; Focks, Andreas; Gabsi, Faten; Gergs, André; Goussen, Benoit; Jager, Tjalling; Kramer, Nynke I.; Nyman, Anna-Maija; Poulsen, Veronique; Reichenberger, Stefan; Schäfer, Ralf B.; van den Brink, Paul J.; Veltman, Karin; Vogel, Sören; Zimmer, Elke I.; Preuss, Thomas G.

2016-07-01

The General Unified Threshold model for Survival (GUTS) integrates previously published toxicokinetic-toxicodynamic models and estimates survival with explicitly defined assumptions. Importantly, GUTS accounts for time-variable exposure to the stressor. We performed three studies to test the ability of GUTS to predict survival of aquatic organisms across different pesticide exposure patterns, time scales and species. Firstly, using synthetic data, we identified experimental data requirements which allow for the estimation of all parameters of the GUTS proper model. Secondly, we assessed how well GUTS, calibrated with short-term survival data of Gammarus pulex exposed to four pesticides, can forecast effects of longer-term pulsed exposures. Thirdly, we tested the ability of GUTS to estimate 14-day median effect concentrations of malathion for a range of species and use these estimates to build species sensitivity distributions for different exposure patterns. We find that GUTS adequately predicts survival across exposure patterns that vary over time. When toxicity is assessed for time-variable concentrations species may differ in their responses depending on the exposure profile. This can result in different species sensitivity rankings and safe levels. The interplay of exposure pattern and species sensitivity deserves systematic investigation in order to better understand how organisms respond to stress, including humans.

Localization, characterization and candidate gene discovery for genes controlling dormancy, chilling requirement, bloom time, and heat requirement in Prunus species.

USDA-ARS?s Scientific Manuscript database

Perennial fruiting trees require sustained exposure to low, near freezing, temperatures before vigorous floral and vegetative bud break is possible after the resumption of warm temperatures in the spring. The depth of dormancy, duration of chilling required (the chilling requirement, CR) blooming da...

Norepinephrine transporter function and desipramine: residual drug effects versus short-term regulation.

PubMed

Ordway, Gregory A; Jia, Weihong; Li, Jing; Zhu, Meng-Yang; Mandela, Prashant; Pan, Jun

2005-04-30

Previous research has shown that exposure of norepinephrine transporter (NET)-expressing cells to desipramine (DMI) downregulates the norepinephrine transporter, although changes in the several transporter parameters do not demonstrate the same time course. Exposures to desipramine for <1 day reduces only radioligand binding and uptake capacity while transporter-immunoreactivity is unaffected. Recent demonstration of persistent drug retention in cells following desipramine exposures raises the possibility that previous reported changes in the norepinephrine transporter may be partly accountable by residual drug. In this study, potential effects of residual desipramine on norepinephrine transporter binding and uptake were re-evaluated following exposures of PC12 cells to desipramine using different methods to remove residual drug. Using a method that minimizes residual drug, exposure of intact PC12 cells to desipramine for 4h had no effect on uptake capacity or [(3)H]nisoxetine binding to the norepinephrine transporter, while exposures for > or =16 h reduced uptake capacity. Desipramine-induced reductions in binding to the transporter required >24 h or greater periods of desipramine exposure. This study confirms that uptake capacity of the norepinephrine transporter is reduced earlier than changes in radioligand binding, but with a different time course than originally shown. Special pre-incubation procedures are required to abolish effects of residual transporter inhibitor when studying inhibitor-induced transporter regulation.

75 FR 45671 - Submission for OMB Review: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... previously approved collection. Title of Collection: Asbestos in General Industry (29 CFR 1910.1001). OMB... hazardous asbestos exposure. Asbestos exposure results in asbestosis, an emphysema-like condition; lung... requirement to prevent release of airborne asbestos above the time-weighted average and excursion limit. Other...

A rat model of nerve agent exposure applicable to the pediatric population: The anticonvulsant efficacies of atropine and GluK1 antagonists

PubMed Central

Miller, Steven L.; Aroniadou-Anderjaska, Vassiliki; Figueiredo, Taiza H.; Prager, Eric M.; Almeida-Suhett, Camila P.; Apland, James P.; Braga, Maria F.M.

2015-01-01

Inhibition of acetylcholinesterase (AChE) after nerve agent exposure induces status epilepticus (SE), which causes brain damage or death. The development of countermeasures appropriate for the pediatric population requires testing of anticonvulsant treatments in immature animals. In the present study, exposure of 21-day-old (P21) rats to different doses of soman, followed by probit analysis, produced an LD50 of 62 μg/kg. The onset of behaviorally-observed SE was accompanied by a dramatic decrease in brain AChE activity; rats who did not develop SE had significantly less reduction of AChE activity in the basolateral amygdala than rats who developed SE. Atropine sulfate (ATS) at 2 mg/kg, administered 20 min after soman exposure (1.2XLD50), terminated seizures. ATS at 0.5 mg/kg, given along with an oxime within 1 min after exposure, allowed testing of anticonvulsants at delayed time-points. The AMPA/GluK1 receptor antagonist LY293558, or the specific GluK1 antagonist UBP302, administered 1 h post-exposure, terminated SE. There were no degenerating neurons in soman-exposed P21 rats, but both the amygdala and the hippocampus were smaller than in control rats at 30 and 90 days post-exposure; this pathology was not present in rats treated with LY293558. Behavioral deficits present at 30 days post-exposure, were also prevented by LY293558 treatment. Thus, in immature animals, a single injection of atropine is sufficient to halt nerve agent-induced seizures, if administered timely. Testing anticonvulsants at delayed time-points requires early administration of ATS at a low dose, sufficient to counteract only peripheral toxicity. LY293558 administered 1 h post-exposure, prevents brain pathology and behavioral deficits. PMID:25689173

Instrument for Study of Microbial Thermal Inactivation

PubMed Central

Dickerson, R. W.; Read, R. B.

1968-01-01

An instrument was designed for the study of thermal inactivation of microorganisms using heating times of less than 1 sec. The instrument operates on the principle of rapid automatic displacement of the microorganism to and from a saturated steam atmosphere, and the operating temperature range is 50 to 90 C. At a temperature of 70 C, thermometric lag (time required to respond to 63.2% of a step change) of the fluid sample containing microorganisms was 0.12 sec. Heating time required to heat the sample to within 0.1 C of the exposure temperature was less than 1 sec, permitting exposure periods as brief as 1 sec, provided the proper corrections are made for the lethal effect of heating. The instrument is most useful for heat exposure periods of less than 5 min, and, typically, more than 500 samples can be processed for microbial inactivation determinations within an 8-hr period. Images Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 7 Fig. 8 PMID:4874466

Exposure Time Distributions reveal Denitrification Rates along Groundwater Flow Path of an Agricultural Unconfined Aquifer

NASA Astrophysics Data System (ADS)

Kolbe, T.; Abbott, B. W.; Thomas, Z.; Labasque, T.; Aquilina, L.; Laverman, A.; Babey, T.; Marçais, J.; Fleckenstein, J. H.; Peiffer, S.; De Dreuzy, J. R.; Pinay, G.

2016-12-01

Groundwater contamination by nitrate is nearly ubiquitous in agricultural regions. Nitrate is highly mobile in groundwater and though it can be denitrified in the aquifer (reduced to inert N2 gas), this process requires the simultaneous occurrence of anoxia, an electron donor (e.g. organic carbon, pyrite), nitrate, and microorganisms capable of denitrification. In addition to this the ratio of the time groundwater spent in a denitrifying environment (exposure time) to the characteristic denitrification reaction time plays an important role, because denitrification can only occur if the exposure time is longer than the characteristic reaction time. Despite a long history of field studies and numerical models, it remains exceedingly difficult to measure or model exposure times in the subsurface at the catchment scale. To approach this problem, we developed a unified modelling approach combining measured environmental proxies with an exposure time based reactive transport model. We measured groundwater age, nitrogen and sulfur isotopes, and water chemistry from agricultural wells in an unconfined aquifer in Brittany, France, to quantify changes in nitrate concentration due to dilution and denitrification. Field data showed large differences in nitrate concentrations among wells, associated with differences in the exposure time distributions. By constraining a catchment-scale characteristic reaction time for denitrification with water chemistry proxies and exposure times, we were able to assess rates of denitrification along groundwater flow paths. This unified modeling approach is transferable to other catchments and could be further used to investigate how catchment structure and flow dynamics interact with biogeochemical processes such as denitrification.

Modelling survival: exposure pattern, species sensitivity and uncertainty

PubMed Central

Ashauer, Roman; Albert, Carlo; Augustine, Starrlight; Cedergreen, Nina; Charles, Sandrine; Ducrot, Virginie; Focks, Andreas; Gabsi, Faten; Gergs, André; Goussen, Benoit; Jager, Tjalling; Kramer, Nynke I.; Nyman, Anna-Maija; Poulsen, Veronique; Reichenberger, Stefan; Schäfer, Ralf B.; Van den Brink, Paul J.; Veltman, Karin; Vogel, Sören; Zimmer, Elke I.; Preuss, Thomas G.

2016-01-01

The General Unified Threshold model for Survival (GUTS) integrates previously published toxicokinetic-toxicodynamic models and estimates survival with explicitly defined assumptions. Importantly, GUTS accounts for time-variable exposure to the stressor. We performed three studies to test the ability of GUTS to predict survival of aquatic organisms across different pesticide exposure patterns, time scales and species. Firstly, using synthetic data, we identified experimental data requirements which allow for the estimation of all parameters of the GUTS proper model. Secondly, we assessed how well GUTS, calibrated with short-term survival data of Gammarus pulex exposed to four pesticides, can forecast effects of longer-term pulsed exposures. Thirdly, we tested the ability of GUTS to estimate 14-day median effect concentrations of malathion for a range of species and use these estimates to build species sensitivity distributions for different exposure patterns. We find that GUTS adequately predicts survival across exposure patterns that vary over time. When toxicity is assessed for time-variable concentrations species may differ in their responses depending on the exposure profile. This can result in different species sensitivity rankings and safe levels. The interplay of exposure pattern and species sensitivity deserves systematic investigation in order to better understand how organisms respond to stress, including humans. PMID:27381500

Acute inhalative exposure assessment: derivation of guideline levels with special regard to sensitive subpopulations and time scaling.

PubMed

Mielke, Hans; Gundert, Anna; Abraham, Klaus; Gundert-Remy, Ursula

2005-10-30

Risk assessment for acute airborne exposure to volatile organic compounds (VOCs), including exposure to chemical warfare agents, requires consideration of local and systemic effects at high concentrations. The operating procedure developed by the US Acute Exposure Guideline Level (AEGL) committee has gained special attention, in part because of the international collaboration in the project. The procedure defines three levels (AEGL-1: discomfort; AEGL-2: irreversible or other serious, long-lasting adverse effects; AEGL-3: life-threatening effects or death) for different exposure times (10 and 30 min, and 1, 4 and 8 h). In this article, the methodology for deriving AEGL values is reported. Extending the areas covered by the existing AEGL methodology, sensitive subpopulations are dealt with in more detail. Sensitive persons are expected to suffer from stronger effects when exposed to a given external concentration. Using a kinetic model with the sample substance dichloromethane (DCM), the higher internal exposure of children is quantified and compared to a healthy, young adult. The difference is shown to depend on age, on dose, and on duration of exposure. Furthermore, several ways are presented to derive AEGL values for exposure times which differ from the exposure duration in animal studies ('time scaling'). In comparison to the conventional procedure, the alternative approaches are based on mechanistic models of the toxicodynamic effect. Use of these models results in AEGL values which are biologically justified.

Cognitive effects of radiation emitted by cellular phones: the influence of exposure side and time.

PubMed

Luria, Roy; Eliyahu, Ilan; Hareuveny, Ronen; Margaliot, Menachem; Meiran, Nachshon

2009-04-01

This study examined the time dependence effects of exposure to radiofrequency radiation (RFR) emitted by standard GSM cellular phones on the cognitive functions of humans. A total of 48 healthy right-handed male subjects performed a spatial working memory task (that required either a left-hand or a right-hand response) while being exposed to one of two GSM phones placed at both sides of the head. The subjects were randomly divided into three groups. Each group was exposed to one of three exposure conditions: left-side of the head, right-side, or sham-exposure. The experiment consisted of 12 blocks of trials. Response times (RTs) and accuracy of the responses were recorded. It was found that the average RT of the right-hand responses under left-side exposure condition was significantly longer than those of the right-side and sham-exposure groups averaged together during the first two time blocks. These results confirmed the existence of an effect of exposure on RT, as well as the fact that exposure duration (together with the responding hand and the side of exposure) may play an important role in producing detectable RFR effects on performance. Differences in these parameters might be the reason for the failure of certain studies to detect or replicate RFR effects. (c) 2008 Wiley-Liss, Inc.

Multi-exposure speckle imaging of cerebral blood flow: a pilot clinical study (Conference Presentation)

NASA Astrophysics Data System (ADS)

Richards, Lisa M.; Kazmi, S. M. S.; Olin, Katherine E.; Waldron, James S.; Fox, Douglas J.; Dunn, Andrew K.

2017-03-01

Monitoring cerebral blood flow (CBF) during neurosurgery is essential for detecting ischemia in a timely manner for a wide range of procedures. Multiple clinical studies have demonstrated that laser speckle contrast imaging (LSCI) has high potential to be a valuable, label-free CBF monitoring technique during neurosurgery. LSCI is an optical imaging method that provides blood flow maps with high spatiotemporal resolution requiring only a coherent light source, a lens system, and a camera. However, the quantitative accuracy and sensitivity of LSCI is limited and highly dependent on the exposure time. An extension to LSCI called multi-exposure speckle imaging (MESI) overcomes these limitations, and was evaluated intraoperatively in patients undergoing brain tumor resection. This clinical study (n = 7) recorded multiple exposure times from the same cortical tissue area, and demonstrates that shorter exposure times (≤1 ms) provide the highest dynamic range and sensitivity for sampling flow rates in human neurovasculature. This study also combined exposure times using the MESI model, demonstrating high correlation with proper image calibration and acquisition. The physiological accuracy of speckle-estimated flow was validated using conservation of flow analysis on vascular bifurcations. Flow estimates were highly conserved in MESI and 1 ms exposure LSCI, with percent errors at 6.4% ± 5.3% and 7.2% ± 7.2%, respectively, while 5 ms exposure LSCI had higher errors at 21% ± 10% (n = 14 bifurcations). Results from this study demonstrate the importance of exposure time selection for LSCI, and that intraoperative MESI can be performed with high quantitative accuracy.

The Canadian Human Activity Pattern Survey: report of methods and population surveyed.

PubMed

Leech, J A; Wilby, K; McMullen, E; Laporte, K

1996-01-01

The assessment of health risk due to environmental contaminants depends upon accurate estimates of the distribution of population exposures. Exposure assessment, in turn, requires information on the time people spend in micro-environments and their activities during periods of exposure. This paper describes preliminary results including study methodology and population sampled in a large Canadian survey of time-activity patterns. A 24-hour diary recall survey was performed in 2381 households (representing a 65% response rate) to describe in detail the timing, location and activity pattern of one household member (the adult or child with the next birthday). Four cities (Toronto, Vancouver, Edmonton and Saint John, NB) and their suburbs were sampled by random-digit dialling over a nine-month period in 1994/1995. Supplemental questionnaires inquiring about sociodemographic information, house and household characteristics and potential exposure to toxins in the air and water were also administered. In general, the results show that respondents spend the majority of their time indoors (88.6%) with smaller proportions of time outdoors (6.1%) and in vehicles (5.3%). Children under the age of 12 spend more time both indoors and outdoors and less time in transit than do adults. The data from this study will be used to define more accurately the exposure of Canadians to a variety of toxins in exposure assessment models and to improve upon the accuracy of risk assessment for a variety of acute and chronic health effects known or suspected to be related to environmental exposures.

Elimination of water pathogens with solar radiation using an automated sequential batch CPC reactor.

PubMed

Polo-López, M I; Fernández-Ibáñez, P; Ubomba-Jaswa, E; Navntoft, C; García-Fernández, I; Dunlop, P S M; Schmid, M; Byrne, J A; McGuigan, K G

2011-11-30

Solar disinfection (SODIS) of water is a well-known, effective treatment process which is practiced at household level in many developing countries. However, this process is limited by the small volume treated and there is no indication of treatment efficacy for the user. Low cost glass tube reactors, together with compound parabolic collector (CPC) technology, have been shown to significantly increase the efficiency of solar disinfection. However, these reactors still require user input to control each batch SODIS process and there is no feedback that the process is complete. Automatic operation of the batch SODIS process, controlled by UVA-radiation sensors, can provide information on the status of the process, can ensure the required UVA dose to achieve complete disinfection is received and reduces user work-load through automatic sequential batch processing. In this work, an enhanced CPC photo-reactor with a concentration factor of 1.89 was developed. The apparatus was automated to achieve exposure to a pre-determined UVA dose. Treated water was automatically dispensed into a reservoir tank. The reactor was tested using Escherichia coli as a model pathogen in natural well water. A 6-log inactivation of E. coli was achieved following exposure to the minimum uninterrupted lethal UVA dose. The enhanced reactor decreased the exposure time required to achieve the lethal UVA dose, in comparison to a CPC system with a concentration factor of 1.0. Doubling the lethal UVA dose prevented the need for a period of post-exposure dark inactivation and reduced the overall treatment time. Using this reactor, SODIS can be automatically carried out at an affordable cost, with reduced exposure time and minimal user input. Copyright © 2011 Elsevier B.V. All rights reserved.

Practice does make perfect. A longitudinal look at repeated taste exposure.

PubMed

Williams, Keith E; Paul, Candace; Pizzo, Bianca; Riegel, Katherine

2008-11-01

Previous research has found that 10-15 exposures to a novel food found can increase liking and consumption. This research has been, however, largely limited cross-sectional studies in which participants are offered only one or a few novel foods. The goal of the current study uses a small clinical sample to demonstrate the number of exposures required for consumption of novel foods decreases as a greater number of foods are added to the diet. Evidence that fewer exposures are needed over time may make interventions based upon repeated exposure more acceptable to parents and clinicians.

Marijuana Exposure Among Children Younger Than Six Years in the United States.

PubMed

Onders, Bridget; Casavant, Marcel J; Spiller, Henry A; Chounthirath, Thiphalak; Smith, Gary A

2016-05-01

This study investigates marijuana exposures among children <6 years old in the United States using data from the National Poison Data System. From 2000 through 2013, there were 1969 marijuana exposures among children <6 years old and an exposure rate of 5.90 per million children. The mean age of an exposed child was 1.81 years (median = 1.58 years). The majority of the children were exposed through ingestion (75.0%), and 18.5% of exposures required admission to a health care facility. The rate of marijuana exposure was significantly (2.82 times) higher in states where its use was legalized prior to 2000 compared with states where its use is not legal. Because more states are likely to pass legislation legalizing medical and recreational use of marijuana, increased efforts to establish child-focused safety requirements regarding packaging of commercially sold marijuana products are needed to help prevent more children from being exposed to this schedule I substance. © The Author(s) 2015.

Occupational Exposure to Respirable Crystalline Silica. Final rule.

PubMed

2016-03-25

The Occupational Safety and Health Administration (OSHA) is amending its existing standards for occupational exposure to respirable crystalline silica. OSHA has determined that employees exposed to respirable crystalline silica at the previous permissible exposure limits face a significant risk of material impairment to their health. The evidence in the record for this rulemaking indicates that workers exposed to respirable crystalline silica are at increased risk of developing silicosis and other non-malignant respiratory diseases, lung cancer, and kidney disease. This final rule establishes a new permissible exposure limit of 50 micrograms of respirable crystalline silica per cubic meter of air (50 [mu]g/m\\3\\) as an 8-hour time-weighted average in all industries covered by the rule. It also includes other provisions to protect employees, such as requirements for exposure assessment, methods for controlling exposure, respiratory protection, medical surveillance, hazard communication, and recordkeeping. OSHA is issuing two separate standards--one for general industry and maritime, and the other for construction--in order to tailor requirements to the circumstances found in these sectors.

13 CFR 120.847 - Requirements for the Loan Loss Reserve Fund (LLRF).

Code of Federal Regulations, 2011 CFR

2011-01-01

... by all parties in a timely fashion, and that all required deposits are made. (b) PCLP CDC Exposure... establish and maintain an LLRF equal to one percent of the original principal amount (the face amount) of...

13 CFR 120.847 - Requirements for the Loan Loss Reserve Fund (LLRF).

Code of Federal Regulations, 2010 CFR

2010-01-01

... by all parties in a timely fashion, and that all required deposits are made. (b) PCLP CDC Exposure... establish and maintain an LLRF equal to one percent of the original principal amount (the face amount) of...

Design considerations for case series models with exposure onset measurement error.

PubMed

Mohammed, Sandra M; Dalrymple, Lorien S; Sentürk, Damla; Nguyen, Danh V

2013-02-28

The case series model allows for estimation of the relative incidence of events, such as cardiovascular events, within a pre-specified time window after an exposure, such as an infection. The method requires only cases (individuals with events) and controls for all fixed/time-invariant confounders. The measurement error case series model extends the original case series model to handle imperfect data, where the timing of an infection (exposure) is not known precisely. In this work, we propose a method for power/sample size determination for the measurement error case series model. Extensive simulation studies are used to assess the accuracy of the proposed sample size formulas. We also examine the magnitude of the relative loss of power due to exposure onset measurement error, compared with the ideal situation where the time of exposure is measured precisely. To facilitate the design of case series studies, we provide publicly available web-based tools for determining power/sample size for both the measurement error case series model as well as the standard case series model. Copyright © 2012 John Wiley & Sons, Ltd.

Inhalation toxicology. IV., Times to incapacitation and death for rats exposed continuously to atmospheric hydrogen chloride gas.

DOT National Transportation Integrated Search

1985-05-01

Laboratory rats were exposed continuously to measured atmospheric concentrations of hydrogen chloride (HC1) gas until they expired. The exposure time required to produce lethality was measured, as was the time at which physical incapacitation occurre...

Investigations of high-speed digital imaging of low-light-level events using pulsed near-infrared laser light sources

NASA Astrophysics Data System (ADS)

Jantzen, Connie; Slagle, Rick

1997-05-01

The distinction between exposure time and sample rate is often the first point raised in any discussion of high speed imaging. Many high speed events require exposure times considerably shorter than those that can be achieved solely by the sample rate of the camera, where exposure time equals 1/sample rate. Gating, a method of achieving short exposure times in digital cameras, is often difficult to achieve for exposure time requirements shorter than 100 microseconds. This paper discusses the advantages and limitations of using the short duration light pulse of a near infrared laser with high speed digital imaging systems. By closely matching the output wavelength of the pulsed laser to the peak near infrared response of current sensors, high speed image capture can be accomplished at very low (visible) light levels of illumination. By virtue of the short duration light pulse, adjustable to as short as two microseconds, image capture of very high speed events can be achieved at relatively low sample rates of less than 100 pictures per second, without image blur. For our initial investigations, we chose a ballistic subject. The results of early experimentation revealed the limitations of applying traditional ballistic imaging methods when using a pulsed infrared lightsource with a digital imaging system. These early disappointing results clarified the need to further identify the unique system characteristics of the digital imager and pulsed infrared combination. It was also necessary to investigate how the infrared reflectance and transmittance of common materials affects the imaging process. This experimental work yielded a surprising, successful methodology which will prove useful in imaging ballistic and weapons tests, as well as forensics, flow visualizations, spray pattern analyses, and nocturnal animal behavioral studies.

Occupational Exposure to Beryllium. Final rule.

PubMed

2017-01-09

The Occupational Safety and Health Administration (OSHA) is amending its existing standards for occupational exposure to beryllium and beryllium compounds. OSHA has determined that employees exposed to beryllium at the previous permissible exposure limits face a significant risk of material impairment to their health. The evidence in the record for this rulemaking indicates that workers exposed to beryllium are at increased risk of developing chronic beryllium disease and lung cancer. This final rule establishes new permissible exposure limits of 0.2 micrograms of beryllium per cubic meter of air (0.2 [mu]g/m\\3\\) as an 8-hour time-weighted average and 2.0 [mu]g/m\\3\\ as a short-term exposure limit determined over a sampling period of 15 minutes. It also includes other provisions to protect employees, such as requirements for exposure assessment, methods for controlling exposure, respiratory protection, personal protective clothing and equipment, housekeeping, medical surveillance, hazard communication, and recordkeeping. OSHA is issuing three separate standards--for general industry, for shipyards, and for construction--in order to tailor requirements to the circumstances found in these sectors.

Systematic Evaluation of the Efficacy of Chlorine Dioxide in Decontamination of Building Interior Surfaces Contaminated with Anthrax Spores▿

PubMed Central

Rastogi, Vipin K.; Ryan, Shawn P.; Wallace, Lalena; Smith, Lisa S.; Shah, Saumil S.; Martin, G. Blair

2010-01-01

Efficacy of chlorine dioxide (CD) gas generated by two distinct generation systems, Sabre (wet system with gas generated in water) and ClorDiSys (dry system with gas generated in air), was evaluated for inactivation of Bacillus anthracis spores on six building interior surfaces. The six building materials included carpet, acoustic ceiling tile, unpainted cinder block, painted I-beam steel, painted wallboard, and unpainted pinewood. There was no statistically significant difference in the data due to the CD generation technology at a 95% confidence level. Note that a common method of CD gas measurement was used for both wet and dry CD generation types. Doses generated by combinations of different concentrations of CD gas (500, 1,000, 1,500, or 3,000 parts per million of volume [ppmv]) and exposure times (ranging between 0.5 and 12 h) were used to evaluate the relative role of fumigant exposure period and total dose in the decontamination of building surfaces. The results showed that the time required to achieve at least a 6-log reduction in viable spores is clearly a function of the material type on which the spores are inoculated. The wood and cinder block coupons required a longer exposure time to achieve a 6-log reduction. The only material showing a clear statistical difference in rate of decay of viable spores as a function of concentration was cinder block. For all other materials, the profile of spore kill (i.e., change in number of viable spores with exposure time) was not dependent upon fumigant concentration (500 to 3,000 ppmv). The CD dose required for complete spore kill on biological indicators (typically, 1E6 spores of Bacillus atrophaeus on stainless steel) was significantly less than that required for decontamination of most of the building materials tested. PMID:20305025

Systematic evaluation of the efficacy of chlorine dioxide in decontamination of building interior surfaces contaminated with anthrax spores.

PubMed

Rastogi, Vipin K; Ryan, Shawn P; Wallace, Lalena; Smith, Lisa S; Shah, Saumil S; Martin, G Blair

2010-05-01

Efficacy of chlorine dioxide (CD) gas generated by two distinct generation systems, Sabre (wet system with gas generated in water) and ClorDiSys (dry system with gas generated in air), was evaluated for inactivation of Bacillus anthracis spores on six building interior surfaces. The six building materials included carpet, acoustic ceiling tile, unpainted cinder block, painted I-beam steel, painted wallboard, and unpainted pinewood. There was no statistically significant difference in the data due to the CD generation technology at a 95% confidence level. Note that a common method of CD gas measurement was used for both wet and dry CD generation types. Doses generated by combinations of different concentrations of CD gas (500, 1,000, 1,500, or 3,000 parts per million of volume [ppmv]) and exposure times (ranging between 0.5 and 12 h) were used to evaluate the relative role of fumigant exposure period and total dose in the decontamination of building surfaces. The results showed that the time required to achieve at least a 6-log reduction in viable spores is clearly a function of the material type on which the spores are inoculated. The wood and cinder block coupons required a longer exposure time to achieve a 6-log reduction. The only material showing a clear statistical difference in rate of decay of viable spores as a function of concentration was cinder block. For all other materials, the profile of spore kill (i.e., change in number of viable spores with exposure time) was not dependent upon fumigant concentration (500 to 3,000 ppmv). The CD dose required for complete spore kill on biological indicators (typically, 1E6 spores of Bacillus atrophaeus on stainless steel) was significantly less than that required for decontamination of most of the building materials tested.

A rat model of nerve agent exposure applicable to the pediatric population: The anticonvulsant efficacies of atropine and GluK1 antagonists.

PubMed

Miller, Steven L; Aroniadou-Anderjaska, Vassiliki; Figueiredo, Taiza H; Prager, Eric M; Almeida-Suhett, Camila P; Apland, James P; Braga, Maria F M

2015-04-15

Inhibition of acetylcholinesterase (AChE) after nerve agent exposure induces status epilepticus (SE), which causes brain damage or death. The development of countermeasures appropriate for the pediatric population requires testing of anticonvulsant treatments in immature animals. In the present study, exposure of 21-day-old (P21) rats to different doses of soman, followed by probit analysis, produced an LD50 of 62μg/kg. The onset of behaviorally-observed SE was accompanied by a dramatic decrease in brain AChE activity; rats who did not develop SE had significantly less reduction of AChE activity in the basolateral amygdala than rats who developed SE. Atropine sulfate (ATS) at 2mg/kg, administered 20 min after soman exposure (1.2×LD50), terminated seizures. ATS at 0.5mg/kg, given along with an oxime within 1 min after exposure, allowed testing of anticonvulsants at delayed time-points. The AMPA/GluK1 receptor antagonist LY293558, or the specific GluK1 antagonist UBP302, administered 1h post-exposure, terminated SE. There were no degenerating neurons in soman-exposed P21 rats, but both the amygdala and the hippocampus were smaller than in control rats at 30 and 90days post-exposure; this pathology was not present in rats treated with LY293558. Behavioral deficits present at 30 days post-exposure, were also prevented by LY293558 treatment. Thus, in immature animals, a single injection of atropine is sufficient to halt nerve agent-induced seizures, if administered timely. Testing anticonvulsants at delayed time-points requires early administration of ATS at a low dose, sufficient to counteract only peripheral toxicity. LY293558 administered 1h post-exposure, prevents brain pathology and behavioral deficits. Published by Elsevier Inc.

The Effect of Ongoing Exposure Dynamics in Dose Response Relationships

PubMed Central

Pujol, Josep M.; Eisenberg, Joseph E.; Haas, Charles N.; Koopman, James S.

2009-01-01

Characterizing infectivity as a function of pathogen dose is integral to microbial risk assessment. Dose-response experiments usually administer doses to subjects at one time. Phenomenological models of the resulting data, such as the exponential and the Beta-Poisson models, ignore dose timing and assume independent risks from each pathogen. Real world exposure to pathogens, however, is a sequence of discrete events where concurrent or prior pathogen arrival affects the capacity of immune effectors to engage and kill newly arriving pathogens. We model immune effector and pathogen interactions during the period before infection becomes established in order to capture the dynamics generating dose timing effects. Model analysis reveals an inverse relationship between the time over which exposures accumulate and the risk of infection. Data from one time dose experiments will thus overestimate per pathogen infection risks of real world exposures. For instance, fitting our model to one time dosing data reveals a risk of 0.66 from 313 Cryptosporidium parvum pathogens. When the temporal exposure window is increased 100-fold using the same parameters fitted by our model to the one time dose data, the risk of infection is reduced to 0.09. Confirmation of this risk prediction requires data from experiments administering doses with different timings. Our model demonstrates that dose timing could markedly alter the risks generated by airborne versus fomite transmitted pathogens. PMID:19503605

Measuring sun exposure in epidemiological studies: Matching the method to the research question.

PubMed

King, Laura; Xiang, Fan; Swaminathan, Ashwin; Lucas, Robyn M

2015-12-01

Sun exposure has risks and benefits for health. Testing these associations requires tools for measuring sun exposure that are feasible and relevant to the time-course of the health outcome. Recent sun exposure, e.g. the last week, is best captured by dosimeters and sun diaries. These can also be used for medium-term sun exposure e.g. over several weeks, but incur a high participant burden. Self-reported data on "typical time outdoors" for working and non-working days, is less detailed and not influenced by day-to-day variation. Over a longer period, e.g. the lifetime, or for particular life stages, proxies of sun exposure, such as latitude of residence or ambient ultraviolet (UV) radiation levels (from satellites or ground-level monitoring) can be used, with additional detail provided by lifetime sun exposure calendars that include locations of residence, usual time outdoors, and detail of sunburn episodes. Objective measures of lifetime sun exposure include microtopography of sun-exposed skin (e.g. using silicone casts) or conjunctival UV autofluorescence. Potential modifiers of the association between sun exposure and the health outcome, such as clothing coverage and skin colour, may also need to be measured. We provide a systematic approach to selecting sun exposure measures for use in epidemiological health research. Copyright © 2015 Elsevier B.V. All rights reserved.

NIOSH comments to DOL on the Mine Safety and Health Administration's proposed rule on air quality, chemical substances, and respiratory protection standards by J. D. Millar, March 1, 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The testimony concerns the views of NIOSH regarding the Mine Safety and Health Administration (MSHA) proposed rule on permissible exposure limits; exposure monitoring, abrasive blasting; drill dust control; dangerous atmospheres; and prohibited areas for food and beverages. NIOSH continues to endorse the recommended exposure limit of 1 part per million (ppm) as a 15 minute short term exposure limit for nitrogen-dioxide (10102440). NIOSH supports MSHA in proposing an 8 hour time weighted average of 25ppm for nitric-oxide (10102439). NIOSH supports MSHA in proposing a limit of 35ppm as an 8 hour time weighted average (TWA) for carbon-monoxide (630080) and recommendsmore » that sulfur-dioxide (7446095) exposure be limited to 0.5ppm as an 8 hour TWA. NIOSH recommends that routine air monitoring be required on a periodic basis. NIOSH recommends that mine operators be required to establish a written exposure monitoring plan for each facility that outlines where area and personal samples should be taken, how many samples should be taken, and the implementation of the remaining portions of the proposed rule change. NIOSH supports the rules for abrasive blasting for both coal and metal/nonmetal mines and has identified several substitutive materials for silica sand that could be used in abrasive blasting.« less

Erosive Effect of Different Soft Drinks on Enamel Surface in vitro: Application of Stylus Profilometry

PubMed Central

Barac, Radomir; Gasic, Jovanka; Trutic, Natasa; Sunaric, Slavica; Popovic, Jelena; Djekic, Petar; Radenkovic, Goran; Mitic, Aleksandar

2015-01-01

Objective To assess the erosive potential of various soft drinks by measuring initial pH and titratable acidity (TA) and to evaluate enamel surface roughness using different exposure times. Materials and Methods The initial pH of the soft drinks (group 1: Coca-Cola; group 2: orange juice; group 3: Cedevita; group 4: Guarana, and group 5: strawberry yoghurt) was measured using a pH meter, and TA was measured by titration with NaOH. Enamel samples (n = 96), cut from unerupted human third molars, were randomly assigned to 6 groups: experimental (groups 1–5) and control (filtered saliva). The samples were exposed to 50 ml of soft drinks for 15, 30 and 60 min, 3 times daily, during 10 days. Between immersions, the samples were kept in filtered saliva. Enamel surface roughness was measured by diamond stylus profilometer using the following roughness parameters: Ra, Rq, Rz, and Ry. Data were analyzed by one-way ANOVA, Tukey's post hoc and Student-Newman-Keuls post hoc tests. Results The pH values of the soft drinks ranged from 2.52 (Guarana) to 4.21 (strawberry yoghurt). Orange juice had the highest TA, requiring 5.70 ml of NaOH to reach pH 7.0, whereas Coca-Cola required only 1.87 ml. Roughness parameters indicated that Coca-Cola had the strongest erosion potential during the 15 min of exposure, while Coca-Cola and orange juice were similar during 30- and 60-min exposures. There were no significant differences related to all exposure times between Guarana and Cedevita. Strawberry yoghurt did not erode the enamel surface regardless of the exposure time. Conclusion All of the tested soft drinks except yoghurt were erosive. Erosion of the enamel surfaces exposed to Coca-Cola, orange juice, Cedevita, and Guarana was directly proportional to the exposure time. PMID:26111496

Erosive Effect of Different Soft Drinks on Enamel Surface in vitro: Application of Stylus Profilometry.

PubMed

Barac, Radomir; Gasic, Jovanka; Trutic, Natasa; Sunaric, Slavica; Popovic, Jelena; Djekic, Petar; Radenkovic, Goran; Mitic, Aleksandar

2015-01-01

To assess the erosive potential of various soft drinks by measuring initial pH and titratable acidity (TA) and to evaluate enamel surface roughness using different exposure times. The initial pH of the soft drinks (group 1: Coca-Cola; group 2: orange juice; group 3: Cedevita; group 4: Guarana, and group 5: strawberry yoghurt) was measured using a pH meter, and TA was measured by titration with NaOH. Enamel samples (n = 96), cut from unerupted human third molars, were randomly assigned to 6 groups: experimental (groups 1-5) and control (filtered saliva). The samples were exposed to 50 ml of soft drinks for 15, 30 and 60 min, 3 times daily, during 10 days. Between immersions, the samples were kept in filtered saliva. Enamel surface roughness was measured by diamond stylus profilometer using the following roughness parameters: Ra, Rq, Rz, and Ry. Data were analyzed by one-way ANOVA, Tukey's post hoc and Student-Newman-Keuls post hoc tests. The pH values of the soft drinks ranged from 2.52 (Guarana) to 4.21 (strawberry yoghurt). Orange juice had the highest TA, requiring 5.70 ml of NaOH to reach pH 7.0, whereas Coca-Cola required only 1.87 ml. Roughness parameters indicated that Coca-Cola had the strongest erosion potential during the 15 min of exposure, while Coca-Cola and orange juice were similar during 30- and 60-min exposures. There were no significant differences related to all exposure times between Guarana and Cedevita. Strawberry yoghurt did not erode the enamel surface regardless of the exposure time. All of the tested soft drinks except yoghurt were erosive. Erosion of the enamel surfaces exposed to Coca-Cola, orange juice, Cedevita, and Guarana was directly proportional to the exposure time. © 2015 S. Karger AG, Basel.

Immortal time bias in drug safety cohort studies: spontaneous abortion following nonsteroidal antiinflammatory drug exposure.

PubMed

Daniel, Sharon; Koren, Gideon; Lunenfeld, Eitan; Levy, Amalia

2015-03-01

Experimental research of drug safety in pregnancy is generally not feasible because of ethical issues. Therefore, most of the information about drug safety in general and teratogenicity in particular is obtained through observational studies, which require careful methodologic design to obtain unbiased results. Immortal time bias occurs when some cases do not "survive" sufficient time in the study, and as such, they have reduced chances of being defined as "exposed" simply because the durations of their follow-ups were shorter. For example, studies that examine the risk for spontaneous abortions in women exposed to a drug during pregnancy are susceptible to immortal time bias because the chance of drug exposure increases the longer a pregnancy lasts. Therefore, the drug tested may falsely be found protective against the outcome tested. The objective of the current study was to illustrate the extent of immortal time bias using a cohort study of pregnancies assessing the risk for spontaneous abortions following nonsteroidal antiinflammatory drug exposure. We assembled 3 databases containing data on spontaneous abortions, births and drug dispensions to create the present study's cohort. The risk for spontaneous abortion was assessed using 2 statistical analysis methods that were compared for 2 definitions of exposure (dichotomous, exposed vs unexposed, regular Cox regression vs Cox regression with time-varying exposure). Significant differences were found in the risk for spontaneous abortions between the 2 statistical methods, both for groups and for most specific nonsteroidal antiinflammatory drugs (nonselective Cox inhibitors - hazard ratio, 0.70; 95% confidence interval, 0.61-0.94 vs hazard ratio, 1.10; 95% confidence interval, 0.99-1.22 for dichotomous vs time-varying exposure analyses, respectively). Furthermore, a significant correlation was found between the median misclassified immortal time for each drug and the extent of the bias. Immortal time bias can easily occur in cohort studies assessing the risk for adverse pregnancy outcomes following exposure to drugs. One way to prevent such a bias is by defining exposure only from the time of exposure during follow-up onward using a time-varying exposure analysis. Copyright © 2015 Elsevier Inc. All rights reserved.

Cationic peptide exposure enhances pulsed-electric-field-mediated membrane disruption.

PubMed

Kennedy, Stephen M; Aiken, Erik J; Beres, Kaytlyn A; Hahn, Adam R; Kamin, Samantha J; Hagness, Susan C; Booske, John H; Murphy, William L

2014-01-01

The use of pulsed electric fields (PEFs) to irreversibly electroporate cells is a promising approach for destroying undesirable cells. This approach may gain enhanced applicability if the intensity of the PEF required to electrically disrupt cell membranes can be reduced via exposure to a molecular deliverable. This will be particularly impactful if that reduced PEF minimally influences cells that are not exposed to the deliverable. We hypothesized that the introduction of charged molecules to the cell surfaces would create regions of enhanced transmembrane electric potential in the vicinity of each charged molecule, thereby lowering the PEF intensity required to disrupt the plasma membranes. This study will therefore examine if exposure to cationic peptides can enhance a PEF's ability to disrupt plasma membranes. We exposed leukemia cells to 40 μs PEFs in media containing varying concentrations of a cationic peptide, polyarginine. We observed the internalization of a membrane integrity indicator, propidium iodide (PI), in real time. Based on an individual cell's PI fluorescence versus time signature, we were able to determine the relative degree of membrane disruption. When using 1-2 kV/cm, exposure to >50 μg/ml of polyarginine resulted in immediate and high levels of PI uptake, indicating severe membrane disruption, whereas in the absence of peptide, cells predominantly exhibited signatures indicative of no membrane disruption. Additionally, PI entered cells through the anode-facing membrane when exposed to cationic peptide, which was theoretically expected. Exposure to cationic peptides reduced the PEF intensity required to induce rapid and irreversible membrane disruption. Critically, peptide exposure reduced the PEF intensities required to elicit irreversible membrane disruption at normally sub-electroporation intensities. We believe that these cationic peptides, when coupled with current advancements in cell targeting techniques will be useful tools in applications where targeted destruction of unwanted cell populations is desired.

Cationic Peptide Exposure Enhances Pulsed-Electric-Field-Mediated Membrane Disruption

PubMed Central

Kennedy, Stephen M.; Aiken, Erik J.; Beres, Kaytlyn A.; Hahn, Adam R.; Kamin, Samantha J.; Hagness, Susan C.; Booske, John H.; Murphy, William L.

2014-01-01

Background The use of pulsed electric fields (PEFs) to irreversibly electroporate cells is a promising approach for destroying undesirable cells. This approach may gain enhanced applicability if the intensity of the PEF required to electrically disrupt cell membranes can be reduced via exposure to a molecular deliverable. This will be particularly impactful if that reduced PEF minimally influences cells that are not exposed to the deliverable. We hypothesized that the introduction of charged molecules to the cell surfaces would create regions of enhanced transmembrane electric potential in the vicinity of each charged molecule, thereby lowering the PEF intensity required to disrupt the plasma membranes. This study will therefore examine if exposure to cationic peptides can enhance a PEF’s ability to disrupt plasma membranes. Methodology/Principal Findings We exposed leukemia cells to 40 μs PEFs in media containing varying concentrations of a cationic peptide, polyarginine. We observed the internalization of a membrane integrity indicator, propidium iodide (PI), in real time. Based on an individual cell’s PI fluorescence versus time signature, we were able to determine the relative degree of membrane disruption. When using 1–2 kV/cm, exposure to >50 μg/ml of polyarginine resulted in immediate and high levels of PI uptake, indicating severe membrane disruption, whereas in the absence of peptide, cells predominantly exhibited signatures indicative of no membrane disruption. Additionally, PI entered cells through the anode-facing membrane when exposed to cationic peptide, which was theoretically expected. Conclusions/Significance Exposure to cationic peptides reduced the PEF intensity required to induce rapid and irreversible membrane disruption. Critically, peptide exposure reduced the PEF intensities required to elicit irreversible membrane disruption at normally sub-electroporation intensities. We believe that these cationic peptides, when coupled with current advancements in cell targeting techniques will be useful tools in applications where targeted destruction of unwanted cell populations is desired. PMID:24671150

Vulnerability of Quick Disconnect Connectors to Carbon Fibers

NASA Technical Reports Server (NTRS)

Meyers, J. A.

1979-01-01

Unprotected quick disconnect electrical connectors were exposed to fibers of 3mm, 7mm, and 12mm lengths. The average exposure to failure was determined. Results indicate that when the fiber length divided by the airgap is less than one, multiple fibers are required to bridge the gap, and the exposure time to failure rises rapidly.

A Simplified Diagnostic Method for Elastomer Bond Durability

NASA Technical Reports Server (NTRS)

White, Paul

2009-01-01

A simplified method has been developed for determining bond durability under exposure to water or high humidity conditions. It uses a small number of test specimens with relatively short times of water exposure at elevated temperature. The method is also gravimetric; the only equipment being required is an oven, specimen jars, and a conventional laboratory balance.

Physical and environmental hazards in the prosthetics and orthotics workshop: a pilot study

PubMed Central

ANDERSON, Sarah; STUCKEY, Rwth; POOLE, Diana; OAKMAN, Jodi

2017-01-01

Prosthetists and Orthotists (P&O) are exposed to physical hazards within the workshop environment. Concern regarding these exposures has been expressed by P&Os; however, little research has been undertaken. Exposures to noise and volatile organic compounds in amounts larger than statutorily allowed can have adverse short and long term consequences on people’s health. To identify and quantify hazardous noise and chemical exposures in a typical P&O workplace. Noise and volatile organic compound testing was undertaken in 2011 and 2013. Modifications to the workshop occurred between these testing times and the impact of these changes examined. The levels of volatile organic compounds was very low in all areas in 2011 and 2013. Noise levels were high and staff require the use of PPE to prevent exposure beyond levels prescribed in the Australian Standards. Conclusions. Occupational environmental exposures in P&O are of concern to the profession. A pilot study of one facility demonstrated that Occupational Noise exposures are high and may result in hearing loss and other adverse health outcomes. Occupational chemical exposures through volatile organic compound exposures are relatively low. Further, systematic investigation is required to develop evidence-based control strategies. PMID:28179609

Anesthetic exposure in the treatment of symptomatic urinary calculi in pregnant women.

PubMed

Rivera, Marcelino E; McAlvany, Kelly L; Brinton, Thomas S; Gettman, Matthew T; Krambeck, Amy E

2014-12-01

To assess the duration and total number of anesthetic exposures required for the treatment of urolithiasis during pregnancy, specifically comparing temporizing measures with active treatment because urolithiasis and its management may pose potential theoretical risks for the mother and fetus. We retrospectively reviewed patients with a confirmed diagnosis of urolithiasis during pregnancy who underwent surgical intervention from 1997 to 2012 at our institution. The number and duration of anesthetic exposures were assessed. We identified 26 women with urolithiasis during pregnancy, of which 15 (58%) were treated with temporizing stents and 11 (42%) with ureteroscopic stone extraction. In the ureteroscopy group, the median number of anesthetic exposures was 1.18 (interquartile range [IQR], 1-2), and the median total anesthetic time was 80 minutes (IQR, 37-126 minutes). In the stent group, 6 (40%) required multiple stent exchanges for a median of 1.47 (IQR, 1-3) anesthetic events and a median total anesthetic time of 70 minutes (IQR, 29-208 minutes). In the ureteral stent group, 7 women (47%) were induced before spontaneous labor due to inability to tolerate the stent. There was no difference in the number of anesthetic events (P = .208) or anesthesia time (P = .503) between stenting and ureteroscopy. Women undergoing ureteroscopic surgical intervention during pregnancy were at no greater risk in the number or cumulative duration of anesthesia exposure than women managed with temporizing ureteral stent placement and subsequent exchanges. Copyright © 2014 Elsevier Inc. All rights reserved.

30 CFR 701.5 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., animal stocking requirements, scheduling of activities and design of sedimentation ponds in accordance... practice giving rise to the peril, would avoid exposure to the danger during the time necessary for... establishments. (g) Recreation. Land used for public or private leisure-time activities, including developed...

30 CFR 701.5 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

..., animal stocking requirements, scheduling of activities and design of sedimentation ponds in accordance... practice giving rise to the peril, would avoid exposure to the danger during the time necessary for... establishments. (g) Recreation. Land used for public or private leisure-time activities, including developed...

30 CFR 701.5 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., animal stocking requirements, scheduling of activities and design of sedimentation ponds in accordance... practice giving rise to the peril, would avoid exposure to the danger during the time necessary for... establishments. (g) Recreation. Land used for public or private leisure-time activities, including developed...

30 CFR 701.5 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., animal stocking requirements, scheduling of activities and design of sedimentation ponds in accordance... practice giving rise to the peril, would avoid exposure to the danger during the time necessary for... establishments. (g) Recreation. Land used for public or private leisure-time activities, including developed...

30 CFR 701.5 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., animal stocking requirements, scheduling of activities and design of sedimentation ponds in accordance... practice giving rise to the peril, would avoid exposure to the danger during the time necessary for... establishments. (g) Recreation. Land used for public or private leisure-time activities, including developed...

Measurement of fluid properties using rapid-double-exposure and time-average holographic interferometry

NASA Technical Reports Server (NTRS)

Decker, A. J.

1984-01-01

The holographic recording of the time history of a flow feature in three dimensions is discussed. The use of diffuse illumination holographic interferometry or the three dimensional visualization of flow features such as shock waves and turbulent eddies is described. The double-exposure and time-average methods are compared using the characteristic function and the results from a flow simulator. A time history requires a large hologram recording rate. Results of holographic cinematography of the shock waves in a flutter cascade are presented as an example. Future directions of this effort, including the availability and development of suitable lasers, are discussed.

Optimization of dual-energy subtraction chest radiography by use of a direct-conversion flat-panel detector system.

PubMed

Fukao, Mari; Kawamoto, Kiyosumi; Matsuzawa, Hiroaki; Honda, Osamu; Iwaki, Takeshi; Doi, Tsukasa

2015-01-01

We aimed to optimize the exposure conditions in the acquisition of soft-tissue images using dual-energy subtraction chest radiography with a direct-conversion flat-panel detector system. Two separate chest images were acquired at high- and low-energy exposures with standard or thick chest phantoms. The high-energy exposure was fixed at 120 kVp with the use of an auto-exposure control technique. For the low-energy exposure, the tube voltages and entrance surface doses ranged 40-80 kVp and 20-100 % of the dose required for high-energy exposure, respectively. Further, a repetitive processing algorithm was used for reduction of the image noise generated by the subtraction process. Seven radiology technicians ranked soft-tissue images, and these results were analyzed using the normalized-rank method. Images acquired at 60 kVp were of acceptable quality regardless of the entrance surface dose and phantom size. Using a repetitive processing algorithm, the minimum acceptable doses were reduced from 75 to 40 % for the standard phantom and to 50 % for the thick phantom. We determined that the optimum low-energy exposure was 60 kVp at 50 % of the dose required for the high-energy exposure. This allowed the simultaneous acquisition of standard radiographs and soft-tissue images at 1.5 times the dose required for a standard radiograph, which is significantly lower than the values reported previously.

Objective and automated measurement of dynamic vision functions

NASA Technical Reports Server (NTRS)

Flom, M. C.; Adams, A. J.

1976-01-01

A phoria stimulus array and electro-oculographic (EOG) arrangements for measuring motor and sensory responses of subjects subjected to stress or drug conditions are described, along with experimental procedures. Heterophoria (as oculomotor function) and glare recovery time (time required for photochemical and neural recovery after exposure to a flash stimulus) are measured, in research aimed at developing automated objective measurement of dynamic vision functions. Onset of involuntary optokinetic nystagmus in subjects attempting to track moving stripes (while viewing through head-mounted binocular eyepieces) after exposure to glare serves as an objective measure of glare recovery time.

Exposure to nature gardens has time-dependent associations with mood improvements for people with mid- and late-stage dementia: Innovative practice.

PubMed

White, Piran Cl; Wyatt, Jonathan; Chalfont, Garuth; Bland, J Martin; Neale, Christopher; Trepel, Dominic; Graham, Hilary

2017-01-01

Exposure to green space and nature has a potential role to play in the care of people with dementia, with possible benefits including improved mood and slower disease progression. In this observational study at a dementia care facility in the UK, we used carer-assessed measures to evaluate change in mood of residents with mid- to late-stage dementia following exposure to a nature garden. We found that exposure to nature was associated with a beneficial change in patient mood. There was a non-linear relationship between time spent outdoors and mood outcome. Improvements in patient mood were associated with relatively short duration exposures to nature, and no additional measureable increases in mood were found with exposures beyond 80-90 minutes duration. Whilst further investigation is required before causality can be determined, these results raise important questions for policy about the integration of outdoor space into the design of dementia care facilities and programmes.

Computer program for diagnostic X-ray exposure conversion.

PubMed

Lewis, S

1984-01-01

Presented is a computer program designed to convert any given set of exposure factors sequentially into another, yielding either an equivalent photographic density or one increased or decreased by a specifiable proportion. In addition to containing the wherewithal with which to manipulate a set of exposure factors, the facility to print hard (paper) copy is included enabling the results to be pasted into a notebook and used at any time. This program was originally written as an investigative exercise into examining the potential use of computers for practical radiographic purposes as conventionally encountered. At the same time, its possible use as an educational tool was borne in mind. To these ends, the current version of this program may be used as a means whereby exposure factors used in a diagnostic department may be altered to suit a particular requirement or may be used in the school as a mathematical model to describe the behaviour of exposure factors under manipulation without patient exposure.

Protection from radon exposure at home and at work in the directive 2013/59/Euratom.

PubMed

Bochicchio, F

2014-07-01

In recent years, international organisations involved in radiation protection and public health have produced new guidance, recommendations and requirements aiming better protection from radon exposure. These organisations have often worked in close collaboration in order to facilitate the establishment of harmonised standards. This paper deals with such standards and specifically with the new European Council Directive of 5 December 2013 on basic safety standards for protection against the dangers arising from exposure to ionising radiation (2013/59/Euratom). This new Directive has established a harmonised framework for the protection against ionising radiations, including protection from radon exposure. Requirements for radon in workplace are much more tightening than in previous Directive, and exposures to radon in dwellings are regulated for the first time in a Directive. Radon-related articles of this Directive are presented and discussed in this paper, along with some comparisons with other relevant international standards. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The Trend-in-trend Research Design for Causal Inference.

PubMed

Ji, Xinyao; Small, Dylan S; Leonard, Charles E; Hennessy, Sean

2017-07-01

Cohort studies can be biased by unmeasured confounding. We propose a hybrid ecologic-epidemiologic design called the trend-in-trend design, which requires a strong time trend in exposure, but is unbiased unless there are unmeasured factors affecting outcome for which there are time trends in prevalence that are correlated with time trends in exposure across strata with different exposure trends. Thus, the conditions under which the trend-in-trend study is biased are a subset of those under which a cohort study is biased. The trend-in-trend design first divides the study population into strata based on the cumulative probability of exposure given covariates, which effectively stratifies on time trend in exposure, provided there is a trend. Next, a covariates-free maximum likelihood model estimates the odds ratio (OR) using data on exposure prevalence and outcome frequency within cumulative probability of exposure strata, across multiple periods. In simulations, the trend-in-trend design produced ORs with negligible bias in the presence of unmeasured confounding. In empiric applications, trend-in-trend reproduced the known positive association between rofecoxib and myocardial infarction (observed OR: 1.2, 95% confidence interval: 1.1, 1.4), and known null associations between rofecoxib and severe hypoglycemia (OR = 1.1 [0.92, 1.3]) and nonvertebral fracture (OR = 0.84 [0.64, 1.1]). The trend-in-trend method may be useful in settings where there is a strong time trend in exposure, such as a newly approved drug or other medical intervention. See video abstract at, http://links.lww.com/EDE/B178.

The effects of some hydrophobic gases on the pulmonary surfactant system.

PubMed Central

Daniels, S; Paton, W D; Smith, E B

1979-01-01

1. Decompression from exposures to raised ambient pressure of sulphur hexafluoride, carbon tetrafluoride, hexafluoro-ethane and nitrous oxide results in the formation of dense foam and pulmonary oedema. 2. The degree of pulmonary oedema produced is dependent on the exposure pressure, although the exposure time required is short in comparison to tissue saturation times. 3. The effect is not prevented by atropine, ephedrine or hydrocortisone. 4. The effect is also produced in vitro by saturated solutions of halothane, chloroform and ether. 5. It is suggested that the mechanism of action is physical with physico-chemical factor involved being a differential partition of these gases within the surfactant: membrane complex. PMID:581651

SMARTS 0.9-m Telescope | CTIO

Science.gov Websites

Travel Information Questionnaire Vistor Support Questionaire Telescope Schedules Astronomer's Tools Contact Acknowledgments TS4 History ISPI ISPI Exposure Time Calculator OSIRIS Spartan Optical Imagers Filter list for more information on the available filters. Time Synchronization For projects that require

Optimising use of the mini C-arm in foot and ankle surgery.

PubMed

Gangopadhyay, Soham; Scammell, Brigitte E

2009-01-01

The mini C-arm reduces exposure to ionising radiation compared to the conventional C-arm. Optimising radiation exposure is not only desirable, but also a legal requirement and protocols should be in place to achieve this. Since 2004, all elective foot surgery requiring intraoperative imaging was performed using the mini C-arm. Screening times and radiation doses were recorded for each procedure. Following a learning curve, the screening times stabilised around the median value for the individual procedures. For subtalar or triple arthrodesis this was less than 60 s, for ankle arthrodesis, less than 90 s, for hindfoot arthrodesis using a nail, less than 100 s and for joint injections less than 12 s. Screening time can be used as an audit tool to measure optimum use of the mini C-arm. A protocol is presented including an audit form for every operation where the mini C-arm is used. Radiation protection issues are addressed.

Exposure information in environmental health research: Current opportunities and future directions for particulate matter, ozone, and toxic air pollutants

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKone, Thomas E.; Ryan, P. Barry; Ozkaynak, Haluk

2007-02-01

Understanding and quantifying outdoor and indoor sources of human exposure are essential but often not adequately addressed in health-effects studies for air pollution. Air pollution epidemiology, risk assessment, health tracking and accountability assessments are examples of health-effects studies that require but often lack adequate exposure information. Recent advances in exposure modeling along with better information on time-activity and exposure factors data provide us with unique opportunities to improve the assignment of exposures for both future and ongoing studies linking air pollution to health impacts. In September 2006, scientists from the US Environmental Protection Agency (EPA) and the Centers for Diseasemore » Control and Prevention (CDC) along with scientists from the academic community and state health departments convened a symposium on air pollution exposure and health in order to identify, evaluate, and improve current approaches for linking air pollution exposures to disease. This manuscript presents the key issues, challenges and recommendations identified by the exposure working group, who used cases studies of particulate matter, ozone, and toxic air pollutant exposure to evaluate health-effects for air pollution. One of the over-arching lessons of this workshop is that obtaining better exposure information for these different health-effects studies requires both goal-setting for what is needed and mapping out the transition pathway from current capabilities to meeting these goals. Meeting our long-term goals requires definition of incremental steps that provide useful information for the interim and move us toward our long-term goals. Another over-arching theme among the three different pollutants and the different health study approaches is the need for integration among alternate exposure assessment approaches. For example, different groups may advocate exposure indicators, biomonitoring, mapping methods (GIS), modeling, environmental media monitoring, and/or personal exposure modeling. However, emerging research reveals that the greatest progress comes from integration among two or more of these efforts.« less

42 CFR 102.21 - Smallpox (Vaccinia) Vaccine Injury Table.

Code of Federal Regulations, 2010 CFR

2010-10-01

...) vaccine in recipients (R); or (2) exposure to vaccinia in contacts (C). Please note that these time... contact requires sufficient evidence in the medical records of the occurrence of a significant local skin... recipient or contact requires sufficient evidence in the medical records of the occurrence of SJS. The SJS...

LIGHT EXPOSURE AMONG ADOLESCENTS WITH DELAYED SLEEP PHASE DISORDER: A PROSPECTIVE COHORT STUDY

PubMed Central

Auger, R. Robert; Burgess, Helen J.; Dierkhising, Ross A.; Sharma, Ruchi G.; Slocumb, Nancy L.

2012-01-01

Our study objective was to compare light exposure and sleep parameters between adolescents with delayed sleep phase disorder (n=16, 15.3 ± 1.8 years) and unaffected controls (n=22, 13.7 ± 2.4 years) using a prospective cohort design. Participants wore wrist actigraphs with photosensors for 14 days. Mean hourly lux levels from 20:00-05:00 h and 05:00-14:00 h were examined, in addition to the 9-hour intervals prior to sleep onset and after sleep offset. Sleep parameters were compared separately, and were also included as covariates within models that analyzed associations with specified light intervals. Additional covariates included group and school night status. Adolescent subjects with delayed sleep phase disorder received more evening (p<0.02, 22:00-02:00 h) and less morning light (p<0.05, 08:00-09:00 h and 10:00-12:00 h) than controls, but had less pre-sleep exposure with adjustments for the time of sleep onset (p<0.03, fifth-seventh hours prior to onset hour). No differences were identified with respect to the sleep offset interval. Increased total sleep time and later sleep offset times were associated with decreased evening (p<0.001 and p=0.02, respectively) and morning (p=0.01 and p<0.001, respectively) exposure, and later sleep onset times were associated with increased evening exposure (p<0.001). Increased total sleep time also correlated with increased exposure during the 9 hours before sleep-onset (p=0.01), and a later sleep onset time corresponded with decreased exposure during the same interval (p<0.001). Outcomes persisted regardless of school night status. In conclusion, light exposure interpretation requires adjustments for sleep timing among adolescents with delayed sleep phase disorder. Pre- and post-sleep exposure do not appear to contribute directly to phase delays. Sensitivity to morning light may be reduced among adolescents with delayed sleep phase disorder. PMID:22080736

Examining the Contemporaneous, Short-Term, and Long-Term Effects of Secondary Exposure to Violence on Adolescent Substance Use.

PubMed

Zimmerman, Gregory M; Kushner, Mackenzie

2017-09-01

The relationship between secondary exposure to violence-defined as witnessing violence in the home, community, or school-and adolescent substance use is well-documented. Yet, multi-wave empirical studies examining this relationship are sparse. In addition, studies have only begun to examine whether this relationship varies by the situational components of the violent event. Using data from the Project on Human Development in Chicago Neighborhoods (PHDCN), this study examines the contemporaneous, short-term, and long-term effects of secondary exposure to violence on substance use, and whether witnessing violence in which a weapon is present has a different impact on adolescent substance use than does witnessing violence without a weapon. Hierarchical logistic regression models on a racially and ethnically diverse sample of 1670 youth (51.5% female) residing in 79 neighborhoods indicated that: (1) the effects of secondary exposure to violence on alcohol and marijuana use were enduring, albeit attenuated, over time; (2) the effect of secondary exposure to violence on illicit drug use was suppressed in the short-term but significant in the long-term; (3) witnessing violence without a weapon was salient for alcohol and marijuana use at all time points; and (4) witnessing violence with a weapon impacted illicit drug use in the long-term. The results suggest that addressing the consequences of secondary exposure to violence requires prolonged intervention efforts and that the study of secondary exposure to violence requires a more nuanced approach that accounts for situational aspects of the violent event.

Photothermal damage is correlated to the delivery rate of time-integrated temperature

NASA Astrophysics Data System (ADS)

Denton, Michael L.; Noojin, Gary D.; Gamboa, B. Giovanna; Ahmed, Elharith M.; Rockwell, Benjamin A.

2016-03-01

Photothermal damage rate processes in biological tissues are usually characterized by a kinetics approach. This stems from experimental data that show how the transformation of a specified biological property of cells or biomolecule (plating efficiency for viability, change in birefringence, tensile strength, etc.) is dependent upon both time and temperature. However, kinetic methods require determination of kinetic rate constants and knowledge of substrate or product concentrations during the reaction. To better understand photothermal damage processes we have identified temperature histories of cultured retinal cells receiving minimum lethal thermal doses for a variety of laser and culture parameters. These "threshold" temperature histories are of interest because they inherently contain information regarding the fundamental thermal dose requirements for damage in individual cells. We introduce the notion of time-integrated temperature (Tint) as an accumulated thermal dose (ATD) with units of °C s. Damaging photothermal exposure raises the rate of ATD accumulation from that of the ambient (e.g. 37 °C) to one that correlates with cell death (e.g. 52 °C). The degree of rapid increase in ATD (ΔATD) during photothermal exposure depends strongly on the laser exposure duration and the ambient temperature.

60-Hz electric-field effects on pineal melatonin rhythms: time course for onset and recovery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, B.W.; Chess, E.K.; Anderson, L.E.

Rats exposed for 3 weeks to uniform 60-Hz electric fields of 39 kV/m (effective field strength) failed to show normal pineal gland circadian rhythms in serotonin N-acetyl transferase activity and melatonin concentrations. The time required for recovery of the melatonin rhythm after cessation of field exposure was determined to be less than 3 days. The rapid recovery suggests that the overall metabolic competence of the pineal is not permanently compromised by electric-field exposure, and that the circadian rhythm effect may be neuronally mediated.

Benzocaine as an anesthetic for striped bass

USGS Publications Warehouse

Gilderhus, Philip A.; Lemm, Carol A.; Woods, L. Curry

1991-01-01

Benzocaine was tested as an anesthetic on juvenile and mature adult striped bass (Morone saxatilis ). Concentrations of 55 mg/L at 22 degree C to 80 mg/L at 11 degree C effectively anesthetized fish in about 3 min. Recovery was more rapid as temperature increased. Fish survived concentrations of twice the effective concentration and exposure times up to 60 min at the effective concentration. Striped bass required higher concentrations for anesthetization than had been previously demonstrated for salmonid fishes, but safety margins for both concentration and exposure time were wider than for the salmonids.

A Quantitative Spectroscopic Comparison of Distant and Nearby Type Ia Supernovae: Tests for Homogeneity and Implications for Cosmology

DTIC Science & Technology

2006-11-14

Spectroscopic Data- Observations Longslit spectra of SNLS SN candidates were taken at the Gemini telescopes with the Gemini Multi-Object Spectrograph [ GMOS ...typical i’ magnitudes ranged from 21.8 to 24.5), and required exposure times of 1 to 2 hours over two to four exposures. The GMOS R400 grating (400 lines...extra 360 seconds. The extra overhead time is often minimised by choosing a small nod distance, or by employing the Electronic N&S mode. The GMOS

Comparisons of discrete and integrative sampling accuracy in estimating pulsed aquatic exposures.

PubMed

Morrison, Shane A; Luttbeg, Barney; Belden, Jason B

2016-11-01

Most current-use pesticides have short half-lives in the water column and thus the most relevant exposure scenarios for many aquatic organisms are pulsed exposures. Quantifying exposure using discrete water samples may not be accurate as few studies are able to sample frequently enough to accurately determine time-weighted average (TWA) concentrations of short aquatic exposures. Integrative sampling methods that continuously sample freely dissolved contaminants over time intervals (such as integrative passive samplers) have been demonstrated to be a promising measurement technique. We conducted several modeling scenarios to test the assumption that integrative methods may require many less samples for accurate estimation of peak 96-h TWA concentrations. We compared the accuracies of discrete point samples and integrative samples while varying sampling frequencies and a range of contaminant water half-lives (t 50  = 0.5, 2, and 8 d). Differences the predictive accuracy of discrete point samples and integrative samples were greatest at low sampling frequencies. For example, when the half-life was 0.5 d, discrete point samples required 7 sampling events to ensure median values > 50% and no sampling events reporting highly inaccurate results (defined as < 10% of the true 96-h TWA). Across all water half-lives investigated, integrative sampling only required two samples to prevent highly inaccurate results and measurements resulting in median values > 50% of the true concentration. Regardless, the need for integrative sampling diminished as water half-life increased. For an 8-d water half-life, two discrete samples produced accurate estimates and median values greater than those obtained for two integrative samples. Overall, integrative methods are the more accurate method for monitoring contaminants with short water half-lives due to reduced frequency of extreme values, especially with uncertainties around the timing of pulsed events. However, the acceptability of discrete sampling methods for providing accurate concentration measurements increases with increasing aquatic half-lives. Copyright © 2016 Elsevier Ltd. All rights reserved.

Field experience with remote monitoring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Desrosiers, A.E.

1995-03-01

The Remote Monitoring System (RMS) is a combination of Merlin Gerin detection hardware, digital data communications hardware, and computer software from Bartlett Services, Inc. (BSI) that can improve the conduct of reactor plant operations in several areas. Using the RMS can reduce radiation exposures to radiation protection technicians (RPTs), reduce radiation exposures to plant maintenance and operations personnel, and reduce the time required to complete maintenance and inspections during outages. The number of temporary RPTs required during refueling outages can also be reduced. Data from use of the RMS at a two power plants are presented to illustrate these points.

Electromagnetic navigation reduces surgical time and radiation exposure for proximal interlocking in retrograde femoral nailing.

PubMed

Somerson, Jeremy S; Rowley, David; Kennedy, Chad; Buttacavoli, Frank; Agarwal, Animesh

2014-07-01

To compare the time required for proximal locking screw placement between a standard freehand technique and the navigated technique, and to quantify the reduction in ionizing radiation exposure. A fresh frozen cadaver model was used for 48 proximal interlocking screw procedures. Each procedure consisted of insertion of 2 anteroposterior locking screws. Standard fluoroscopic technique was used for 24 procedures, and an electromagnetic navigation system was used for the remaining 24 procedures. Procedure duration was recorded using an electronic timer and radiation doses were documented. Mean total insertion time for both proximal interlocking screws was 405 ± 165.7 seconds with the freehand technique and 311 ± 78.3 seconds in the navigation group (P = 0.002). All procedures resulted in successful locking screw placement. Mean ionizing radiation exposure time for proximal locking was 29.5 ± 12.8 seconds. Proximal locking screw insertion using the navigation technique evaluated in this work was significantly faster than the standard fluoroscopic method. The navigated technique is effective and has the potential to prevent ionizing radiation exposure.

Meeting Vitamin D Requirements in White Caucasians at UK Latitudes: Providing a Choice.

PubMed

Webb, Ann R; Kazantzidis, Andreas; Kift, Richard C; Farrar, Mark D; Wilkinson, Jack; Rhodes, Lesley E

2018-04-17

The body gains vitamin D through both oral intake (diet/supplementation) and synthesis in skin upon exposure to ultraviolet radiation (UVR). Sun exposure is the major source for most people even though sun exposure is complex and limited by climate and culture. We aimed to quantify the sun exposure required to meet vitamin D targets year-round and determine whether this can be safely achieved in a simply defined manner in the UK as an alternative to increasing vitamin D oral intake. Data from observation (sun exposure, diet, and vitamin D status) and UVR intervention studies performed with white Caucasian adults were combined with modeled all-weather UVR climatology. Daily vitamin D effective UVR doses (all-weather) were calculated across the UK based on ten-year climatology for pre-defined lunchtime exposure regimes. Calculations then determined the time necessary to spend outdoors for the body to gain sufficient vitamin D levels for year-round needs without being sunburnt under differing exposure scenarios. Results show that, in specified conditions, white Caucasians across the UK need nine minutes of daily sunlight at lunchtime from March to September for 25(OH)D levels to remain ≥25 nmol/L throughout the winter. This assumes forearms and lower legs are exposed June-August, while in the remaining, cooler months only hands and face need be exposed. Exposing only the hands and face throughout the summer does not meet requirements.

Measurement of fluid properties using rapid-double-exposure and time-average holographic interferometry

NASA Technical Reports Server (NTRS)

Decker, A. J.

1984-01-01

The holographic recording of the time history of a flow feature in three dimensions is discussed. The use of diffuse illumination holographic interferometry or the three-dimensional visualization of flow features such as shock waves and turbulent eddies is described. The double-exposure and time-average methods are compared using the characteristic function and the results from a flow simulator. A time history requires a large hologram recording rate. Results of holographic cinematography of the shock waves in a flutter cascade are presented as an example. Future directions of this effort, including the availability and development of suitable lasers, are discussed. Previously announced in STAR as N84-21849

Some implications of an event-based definition of exposure to the risk of road accident.

PubMed

Elvik, Rune

2015-03-01

This paper proposes a new definition of exposure to the risk of road accident as any event, limited in space and time, representing a potential for an accident to occur by bringing road users close to each other in time or space of by requiring a road user to take action to avoid leaving the roadway. A typology of events representing a potential for an accident is proposed. Each event can be interpreted as a trial as defined in probability theory. Risk is the proportion of events that result in an accident. Defining exposure as events demanding the attention of road users implies that road users will learn from repeated exposure to these events, which in turn implies that there will normally be a negative relationship between exposure and risk. Four hypotheses regarding the relationship between exposure and risk are proposed. Preliminary tests support these hypotheses. Advantages and disadvantages of defining exposure as specific events are discussed. It is argued that developments in vehicle technology are likely to make events both observable and countable, thus ensuring that exposure is an operational concept. Copyright © 2014 Elsevier Ltd. All rights reserved.

Variable population exposure and distributed travel speeds in least-cost tsunami evacuation modelling

NASA Astrophysics Data System (ADS)

Fraser, S. A.; Wood, N. J.; Johnston, D. M.; Leonard, G. S.; Greening, P. D.; Rossetto, T.

2014-11-01

Evacuation of the population from a tsunami hazard zone is vital to reduce life-loss due to inundation. Geospatial least-cost distance modelling provides one approach to assessing tsunami evacuation potential. Previous models have generally used two static exposure scenarios and fixed travel speeds to represent population movement. Some analyses have assumed immediate departure or a common evacuation departure time for all exposed population. Here, a method is proposed to incorporate time-variable exposure, distributed travel speeds, and uncertain evacuation departure time into an existing anisotropic least-cost path distance framework. The method is demonstrated for hypothetical local-source tsunami evacuation in Napier City, Hawke's Bay, New Zealand. There is significant diurnal variation in pedestrian evacuation potential at the suburb level, although the total number of people unable to evacuate is stable across all scenarios. Whilst some fixed travel speeds approximate a distributed speed approach, others may overestimate evacuation potential. The impact of evacuation departure time is a significant contributor to total evacuation time. This method improves least-cost modelling of evacuation dynamics for evacuation planning, casualty modelling, and development of emergency response training scenarios. However, it requires detailed exposure data, which may preclude its use in many situations.

Variable population exposure and distributed travel speeds in least-cost tsunami evacuation modelling

USGS Publications Warehouse

Fraser, Stuart A.; Wood, Nathan J.; Johnston, David A.; Leonard, Graham S.; Greening, Paul D.; Rossetto, Tiziana

2014-01-01

Evacuation of the population from a tsunami hazard zone is vital to reduce life-loss due to inundation. Geospatial least-cost distance modelling provides one approach to assessing tsunami evacuation potential. Previous models have generally used two static exposure scenarios and fixed travel speeds to represent population movement. Some analyses have assumed immediate departure or a common evacuation departure time for all exposed population. Here, a method is proposed to incorporate time-variable exposure, distributed travel speeds, and uncertain evacuation departure time into an existing anisotropic least-cost path distance framework. The method is demonstrated for hypothetical local-source tsunami evacuation in Napier City, Hawke's Bay, New Zealand. There is significant diurnal variation in pedestrian evacuation potential at the suburb level, although the total number of people unable to evacuate is stable across all scenarios. Whilst some fixed travel speeds approximate a distributed speed approach, others may overestimate evacuation potential. The impact of evacuation departure time is a significant contributor to total evacuation time. This method improves least-cost modelling of evacuation dynamics for evacuation planning, casualty modelling, and development of emergency response training scenarios. However, it requires detailed exposure data, which may preclude its use in many situations.

Baseline requirements for detecting biosignatures with the HabEx and LUVOIR mission concepts

NASA Astrophysics Data System (ADS)

Wang, Ji; Mawet, Dimitri; Ruane, Garreth; Delorme, Jacques-Robert; Klimovich, Nikita; Hu, Renyu

2017-09-01

A milestone in understanding life in the universe is the detection of biosignature gases in the atmospheres of habitable exoplanets. Future mission concepts under study by the 2020 decadal survey, e.g., HabEx and LUVOIR, have the potential of achieving this goal. We investigate the baseline requirements for detecting four molecular species, H2O, O2, CH4, and CO2. These molecules are highly relevant to habitability and life activity on Earth and other planets. Through numerical simulations, we find the minimum requirement for spectral resolution (R) and starlight suppression level (C) for a given exposure time. We consider scenarios in which different molecules are detected. For example, R = 6400 (400) and C = 5 × 10-10 (2 × 10-9 ) are required for HabEx (LUVOIR) to detect O2 and H2O for an exposure time of 400 hours for an Earth analog around a solar-type star at a distance of 5 pc. The full results are given in Table 2. The impact of exo-zodiacal contamination and thermal background is also discussed

The performance of a prototype device designed to evaluate general quality parameters of X-ray equipment

NASA Astrophysics Data System (ADS)

Murata, C. H.; Fernandes, D. C.; Lavínia, N. C.; Caldas, L. V. E.; Pires, S. R.; Medeiros, R. B.

2014-02-01

The performance of radiological equipment can be assessed using non-invasive methods and portable instruments that can analyze an X-ray beam with just one exposure. These instruments use either an ionization chamber or a state solid detector (SSD) to evaluate X-ray beam parameters. In Brazil, no such instruments are currently being manufactured; consequently, these instruments come at a higher cost to users due to importation taxes. Additionally, quality control tests are time consuming and impose a high workload on the X-ray tubes when evaluating their performance parameters. The assessment of some parameters, such as the half-value layer (HVL), requires several exposures; however, this can be reduced by using a SSD that requires only a single exposure. One such SSD uses photodiodes designed for high X-ray sensitivity without the use of scintillation crystals. This sensitivity allows one electron-hole pair to be created per 3.63 eV of incident energy, resulting in extremely high and stable quantum efficiencies. These silicon photodiodes operate by absorbing photons and generating a flow of current that is proportional to the incident power. The aim of this study was to show the response of the solid sensor PIN RD100A detector in a multifunctional X-ray analysis system that is designed to evaluate the average peak voltage (kVp), exposure time, and HVL of radiological equipment. For this purpose, a prototype board that uses four SSDs was developed to measure kVp, exposure time, and HVL using a single exposure. The reproducibility and accuracy of the results were compared to that of different X-ray beam analysis instruments. The kVp reproducibility and accuracy results were 2% and 3%, respectively; the exposure time reproducibility and accuracy results were 2% and 1%, respectively; and the HVL accuracy was ±2%. The prototype's methodology was able to calculate these parameters with appropriate reproducibility and accuracy. Therefore, the prototype can be considered a multifunctional instrument that can appropriately evaluate the performance of radiological equipment.

Contribution of individual components of a job cycle on overall severity of whole-body vibration exposure: a study in Indian mines.

PubMed

Mandal, Bibhuti B; Mansfield, Neil J

2016-01-01

Drivers of earth-moving machines are exposed to whole-body vibration (WBV). In mining operations there can be a combination of relatively high magnitudes of vibration and long exposure times. Effective risk mitigation requires understanding of the main aspects of a task that pose a hazard to health. There are very few published studies of WBV exposure from India. This paper reports on a study that considered the contribution of the component phases of dumper operations, on the overall vibration exposure of the drivers. It shows that vibration magnitudes are relatively high, and that haulage tasks are the main contributor to the exposure. It is recommended that driver speed, haul road surfaces and vehicle maintenance/selection are optimized to ensure minimization of vibration. If this is not sufficient, operation times might need to be reduced in order to ensure that the health guidance caution zone from Standard No. ISO 2631-1:1997 is not exceeded.

The contributions of emissions and spatial microenvironments to exposure to indoor air pollution from biomass combustion in Kenya.

PubMed Central

Ezzati, M; Saleh, H; Kammen, D M

2000-01-01

Acute and chronic respiratory diseases, which are causally linked to exposure to indoor air pollution in developing countries, are the leading cause of global morbidity and mortality. Efforts to develop effective intervention strategies and detailed quantification of the exposure-response relationship for indoor particulate matter require accurate estimates of exposure. We used continuous monitoring of indoor air pollution and individual time-activity budget data to construct detailed profiles of exposure for 345 individuals in 55 households in rural Kenya. Data for analysis were from two hundred ten 14-hour days of continuous real-time monitoring of concentrations of particulate matter [less than/equal to] 10 microm in aerodynamic diameter and the location and activities of household members. These data were supplemented by data on the spatial dispersion of pollution and from interviews. Young and adult women had not only the highest absolute exposure to particulate matter (2, 795 and 4,898 microg/m(3) average daily exposure concentrations, respectively) but also the largest exposure relative to that of males in the same age group (2.5 and 4.8 times, respectively). Exposure during brief high-intensity emission episodes accounts for 31-61% of the total exposure of household members who take part in cooking and 0-11% for those who do not. Simple models that neglect the spatial distribution of pollution within the home, intense emission episodes, and activity patterns underestimate exposure by 3-71% for different demographic subgroups, resulting in inaccurate and biased estimations. Health and intervention impact studies should therefore consider in detail the critical role of exposure patterns, including the short periods of intense emission, to avoid spurious assessments of risks and benefits. PMID:11017887

Contrasting Causal Effects of Workplace Interventions.

PubMed

Izano, Monika A; Brown, Daniel M; Neophytou, Andreas M; Garcia, Erika; Eisen, Ellen A

2018-07-01

Occupational exposure guidelines are ideally based on estimated effects of static interventions that assign constant exposure over a working lifetime. Static effects are difficult to estimate when follow-up extends beyond employment because their identifiability requires additional assumptions. Effects of dynamic interventions that assign exposure while at work, allowing subjects to leave and become unexposed thereafter, are more easily identifiable but result in different estimates. Given the practical implications of exposure limits, we explored the drivers of the differences between static and dynamic interventions in a simulation study where workers could terminate employment because of an intermediate adverse health event that functions as a time-varying confounder. The two effect estimates became more similar with increasing strength of the health event and outcome relationship and with increasing time between health event and employment termination. Estimates were most dissimilar when the intermediate health event occurred early in employment, providing an effective screening mechanism.

A preliminary study into performing routine tube output and automatic exposure control quality assurance using radiology information system data.

PubMed

Charnock, P; Jones, R; Fazakerley, J; Wilde, R; Dunn, A F

2011-09-01

Data are currently being collected from hospital radiology information systems in the North West of the UK for the purposes of both clinical audit and patient dose audit. Could these data also be used to satisfy quality assurance (QA) requirements according to UK guidance? From 2008 to 2009, 731 653 records were submitted from 8 hospitals from the North West England. For automatic exposure control QA, the protocol from Institute of Physics and Engineering in Medicine (IPEM) report 91 recommends that milliamperes per second can be monitored for repeatability and reproducibility using a suitable phantom, at 70-81 kV. Abdomen AP and chest PA examinations were analysed to find the most common kilovoltage used with these records then used to plot average monthly milliamperes per second with time. IPEM report 91 also recommends that a range of commonly used clinical settings is used to check output reproducibility and repeatability. For each tube, the dose area product values were plotted over time for two most common exposure factor sets. Results show that it is possible to do performance checks of AEC systems; however more work is required to be able to monitor tube output performance. Procedurally, the management system requires work and the benefits to the workflow would need to be demonstrated.

BK/TD models for analyzing in vitro impedance data on cytotoxicity.

PubMed

Teng, S; Barcellini-Couget, S; Beaudouin, R; Brochot, C; Desousa, G; Rahmani, R; Pery, A R R

2015-06-01

The ban of animal testing has enhanced the development of new in vitro technologies for cosmetics safety assessment. Impedance metrics is one such technology which enables monitoring of cell viability in real time. However, analyzing real time data requires moving from static to dynamic toxicity assessment. In the present study, we built mechanistic biokinetic/toxicodynamic (BK/TD) models to analyze the time course of cell viability in cytotoxicity assay using impedance. These models account for the fate of the tested compounds during the assay. BK/TD models were applied to analyze HepaRG cell viability, after single (48 h) and repeated (4 weeks) exposures to three hepatotoxic compounds (coumarin, isoeugenol and benzophenone-2). The BK/TD models properly fit the data used for their calibration that was obtained for single or repeated exposure. Only for one out of the three compounds, the models calibrated with a single exposure were able to predict repeated exposure data. We therefore recommend the use of long-term exposure in vitro data in order to adequately account for chronic hepatotoxic effects. The models we propose here are capable of being coupled with human biokinetic models in order to relate dose exposure and human hepatotoxicity. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Lead exposure in US worksites: A literature review and development of an occupational lead exposure database from the published literature

PubMed Central

Koh, Dong-Hee; Locke, Sarah J.; Chen, Yu-Cheng; Purdue, Mark P.; Friesen, Melissa C.

2016-01-01

Background Retrospective exposure assessment of occupational lead exposure in population-based studies requires historical exposure information from many occupations and industries. Methods We reviewed published US exposure monitoring studies to identify lead exposure measurement data. We developed an occupational lead exposure database from the 175 identified papers containing 1,111 sets of lead concentration summary statistics (21% area air, 47% personal air, 32% blood). We also extracted ancillary exposure-related information, including job, industry, task/location, year collected, sampling strategy, control measures in place, and sampling and analytical methods. Results Measurements were published between 1940 and 2010 and represented 27 2-digit standardized industry classification codes. The majority of the measurements were related to lead-based paint work, joining or cutting metal using heat, primary and secondary metal manufacturing, and lead acid battery manufacturing. Conclusions This database can be used in future statistical analyses to characterize differences in lead exposure across time, jobs, and industries. PMID:25968240

Biological Response to SPE Exposures

NASA Technical Reports Server (NTRS)

Wilson, J. W.; Cucinotta, F. A.; Kim, M.; Shinn, J. L.; Jones, T. D.; Chang, C. K.

2004-01-01

It has long been recognized that a single solar particle event (SPE) can produce, over a short period of time, exposures on the order of LD50 for humans under normal physiological conditions. It is further recognized that recovery from injury over the period of exposure would greatly increase the chances of survival (dose rate effects) although such effects were left unquantified. In the present report we use the bioresponse model derived from a broad range of animal and human exposure data for evaluation of troop readiness in tactical nuclear warfare to evaluate the biological risk posed by the solar event of 4 August 1972. The astronaut blood forming organ (BFO) exposure in deep space would have been 2.2 Sv (1.6 Gy) in a space suit, 1.8 Sv (1.3 Gy) in an aluminum pressure vessel, and 0.7 Sv (0.5 Gy) in an equipment room compared to an X-ray mortality threshold of 1.5 Gy (assuming high dose rate). We find BFO dose rate effectiveness factors for this SPE on the order of 3 to 4, greatly reducing the mortality risks for this event. There is an approximate 3 percent chance that an even larger event may occur for which exposures could be 2-4 times higher. Assured survival of the astronaut requires added shelter shielding and a warning system for this event. The required mass of the shelter shield can be greatly reduced by using hydrogenous materials such as polymers, water, food, and other biological materials in its construction. Limitations of the current bioresponse model arise from the exposures taking place in the microgravity environment wherein the immune system is already challenged and the effective mortality threshold may be reduced by a factor of two. Such microgravity effects could greatly affect astronaut risks.

Current methods of monitoring radiation exposure from CT.

PubMed

Talati, Ronak K; Dunkin, Jared; Parikh, Shrujal; Moore, William H

2013-09-01

Increased public and regulatory scrutiny of imaging-related radiation exposure requires familiarity with current dose-monitoring techniques and best practices. CT-related ionizing radiation exposure has been cited as the largest and fastest growing source of population-wide iatrogenic ionizing radiation exposure. Upcoming federal regulations require imaging centers to familiarize themselves with available dose-monitoring techniques and implement comprehensive strategies to track patient dose, with particular emphasis on CT. Because of institution-specific and vendor-specific technologies, there are significant barriers to adoption and implementation. In this article, the authors outline the core components of a universal dose-monitoring strategy and detail a few of the many available commercial platforms. In addition, the authors introduce a cloud-based hybrid model dose-tracking system with the goal of rapid implementation, multicenter scalability, real-time dose feedback for technologists, cumulative dose monitoring, and optional dose communication to patients and into the record; doing so results in improved patient loyalty, referring physician satisfaction, and opportunity for repeat business. Copyright © 2013 American College of Radiology. All rights reserved.

Estimation of resist sensitivity for extreme ultraviolet lithography using an electron beam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oyama, Tomoko Gowa, E-mail: ohyama.tomoko@qst.go.jp; Oshima, Akihiro; Tagawa, Seiichi, E-mail: tagawa@sanken.osaka-u.ac.jp

2016-08-15

It is a challenge to obtain sufficient extreme ultraviolet (EUV) exposure time for fundamental research on developing a new class of high sensitivity resists for extreme ultraviolet lithography (EUVL) because there are few EUV exposure tools that are very expensive. In this paper, we introduce an easy method for predicting EUV resist sensitivity by using conventional electron beam (EB) sources. If the chemical reactions induced by two ionizing sources (EB and EUV) are the same, the required absorbed energies corresponding to each required exposure dose (sensitivity) for the EB and EUV would be almost equivalent. Based on this theory, wemore » calculated the resist sensitivities for the EUV/soft X-ray region. The estimated sensitivities were found to be comparable to the experimentally obtained sensitivities. It was concluded that EB is a very useful exposure tool that accelerates the development of new resists and sensitivity enhancement processes for 13.5 nm EUVL and 6.x nm beyond-EUVL (BEUVL).« less

Risks, risk assessment and risk competence in toxicology.

PubMed

Stahlmann, Ralf; Horvath, Aniko

2015-01-01

Understanding the toxic effects of xenobiotics requires sound knowledge of physiology and biochemistry. The often described lack of understanding pharmacology/toxicology is therefore primarily caused by the general absence of the necessary fundamental knowledge. Since toxic effects depend on exposure (or dosage) assessing the risks arising from toxic substances also requires quantitative reasoning. Typically public discussions nearly always neglect quantitative aspects and laypersons tend to disregard dose-effect-relationships. One of the main reasons for such disregard is the fact that exposures often occur at extremely low concentrations that can only be perceived intellectually but not by the human senses. However, thresholds in the low exposure range are often scientifically disputed. At the same time, ignorance towards known dangers is wide-spread. Thus, enhancing the risk competence of laypersons will have to be initially restricted to increasing the awareness of existing problems.

Derivation of an occupational exposure limit for an inhalation analgesic methoxyflurane (Penthrox(®)).

PubMed

Frangos, John; Mikkonen, Antti; Down, Christin

2016-10-01

Methoxyflurane (MOF) a haloether, is an inhalation analgesic agent for emergency relief of pain by self administration in conscious patients with trauma and associated pain. It is administered under supervision of personnel trained in its use. As a consequence of supervised use, intermittent occupational exposure can occur. An occupational exposure limit has not been established for methoxyflurane. Human clinical and toxicity data have been reviewed and used to derive an occupational exposure limit (referred to as a maximum exposure level, MEL) according to modern principles. The data set for methoxyflurane is complex given its historical use as anaesthetic. Distinguishing clinical investigations of adverse health effects following high and prolonged exposure during anaesthesia to assess relatively low and intermittent exposure during occupational exposure requires an evidence based approach to the toxicity assessment and determination of a critical effect and point of departure. The principal target organs are the kidney and the central nervous system and there have been rare reports of hepatotoxicity, too. Methoxyflurane is not genotoxic based on in vitro bacterial mutation and in vivo micronucleus tests and it is not classifiable (IARC) as a carcinogenic hazard to humans. The critical effect chosen for development of a MEL is kidney toxicity. The point of departure (POD) was derived from the concentration response relationship for kidney toxicity using the benchmark dose method. A MEL of 15 ppm (expressed as an 8 h time weighted average (TWA)) was derived. The derived MEL is at least 50 times higher than the mean observed TWA (0.23 ppm) for ambulance workers and medical staff involved in supervising use of Penthrox. In typical treatment environments (ambulances and treatment rooms) that meet ventilation requirements the derived MEL is at least 10 times higher than the modelled TWA (1.5 ppm or less) and the estimated short term peak concentrations are within the MEL. The odour threshold for MOF of 0.13-0.19 ppm indicates that the odour is detectable well below the MEL. Given the above considerations the proposed MEL is health protective. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.

A rat model of nerve agent exposure applicable to the pediatric population: The anticonvulsant efficacies of atropine and GluK1 antagonists

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, Steven L., E-mail: stevenmiller17@gmail.com; Program in Neuroscience, Uniformed Services University of the Health Sciences, 4301 Jones Bridge Road, Bethesda, MD 20814; Aroniadou-Anderjaska, Vassiliki, E-mail: vanderjaska@usuhs.edu

Inhibition of acetylcholinesterase (AChE) after nerve agent exposure induces status epilepticus (SE), which causes brain damage or death. The development of countermeasures appropriate for the pediatric population requires testing of anticonvulsant treatments in immature animals. In the present study, exposure of 21-day-old (P21) rats to different doses of soman, followed by probit analysis, produced an LD{sub 50} of 62 μg/kg. The onset of behaviorally-observed SE was accompanied by a dramatic decrease in brain AChE activity; rats who did not develop SE had significantly less reduction of AChE activity in the basolateral amygdala than rats who developed SE. Atropine sulfate (ATS)more » at 2 mg/kg, administered 20 min after soman exposure (1.2 × LD{sub 50}), terminated seizures. ATS at 0.5 mg/kg, given along with an oxime within 1 min after exposure, allowed testing of anticonvulsants at delayed time-points. The AMPA/GluK1 receptor antagonist LY293558, or the specific GluK1 antagonist UBP302, administered 1 h post-exposure, terminated SE. There were no degenerating neurons in soman-exposed P21 rats, but both the amygdala and the hippocampus were smaller than in control rats at 30 and 90 days post-exposure; this pathology was not present in rats treated with LY293558. Behavioral deficits present at 30 days post-exposure, were also prevented by LY293558 treatment. Thus, in immature animals, a single injection of atropine is sufficient to halt nerve agent-induced seizures, if administered timely. Testing anticonvulsants at delayed time-points requires early administration of ATS at a low dose, sufficient to counteract only peripheral toxicity. LY293558 administered 1 h post-exposure, prevents brain pathology and behavioral deficits. - Highlights: • The LD{sub 50} of soman was determined in postnatal-day-21 rats. • Rats with no seizures after 1.2XLD{sub 50} soman had less reduction of AChE in the amygdala. • Atropine sulfate (ATS) at 2 mg/kg, given at 20 min after soman, blocked seizures. • With ATS at 0.5 mg/kg, LY293558 or UBP302 at 1 h after exposure terminated seizures. • LY293558 prevented brain pathology and behavioral deficits.« less

Life sciences research in space: The requirement for animal models

NASA Technical Reports Server (NTRS)

Fuller, C. A.; Philips, R. W.; Ballard, R. W.

1987-01-01

Use of animals in NASA space programs is reviewed. Animals are needed because life science experimentation frequently requires long-term controlled exposure to environments, statistical validation, invasive instrumentation or biological tissue sampling, tissue destruction, exposure to dangerous or unknown agents, or sacrifice of the subject. The availability and use of human subjects inflight is complicated by the multiple needs and demands upon crew time. Because only living organisms can sense, integrate and respond to the environment around them, the sole use of tissue culture and computer models is insufficient for understanding the influence of the space environment on intact organisms. Equipment for spaceborne experiments with animals is described.

Ultraviolet spectral distribution and erythema-weighted irradiance from indoor tanning devices compared with solar radiation exposures.

PubMed

Sola, Yolanda; Baeza, David; Gómez, Miguel; Lorente, Jerónimo

2016-08-01

Concern regarding the impact of indoor tanning devices on human health has led to different regulations and recommendations, which set limits on erythema-weighted irradiance. Here, we analyze spectral emissions from 52 tanning devices in Spanish facilities and compare them with surface solar irradiance for different solar zenith angles. Whereas most of the devices emitted less UV-B radiation than the midday summer sun, the unweighted UV-A irradiance was 2-6 times higher than solar radiation. Moreover, the spectral distributions of indoor devices were completely different from that of solar radiation, differing in one order of magnitude at some UV-A wavelengths, depending on the lamp characteristics. In 21% of the devices tested, the erythema-weighted irradiance exceeded 0.3Wm(-2): the limit fixed by the European standard and the Spanish regulation. Moreover, 29% of the devices fall within the UV type 4 classification, for which medical advice is required. The high variability in erythema-weighted irradiance results in a wide range of exposure times to reach 1 standard erythemal dose (SED: 100Jm(-2)), with 62% of devices requiring exposures of <10min to reach 1 SED. Nevertheless, the unweighted UV-A dose during this time period would be from 1.4 to 10.3 times more than the solar UV-A dose. Copyright © 2016 Elsevier B.V. All rights reserved.

Effects of age, season, gender and urban-rural status on time-activity: CanadianHuman Activity Pattern Survey 2 (CHAPS 2).

PubMed

Matz, Carlyn J; Stieb, David M; Davis, Karelyn; Egyed, Marika; Rose, Andreas; Chou, Benedito; Brion, Orly

2014-02-19

Estimation of population exposure is a main component of human health risk assessment for environmental contaminants. Population-level exposure assessments require time-activity pattern distributions in relation to microenvironments where people spend their time. Societal trends may have influenced time-activity patterns since previous Canadian data were collected 15 years ago. The Canadian Human Activity Pattern Survey 2 (CHAPS 2) was a national survey conducted in 2010-2011 to collect time-activity information from Canadians of all ages. Five urban and two rural locations were sampled using telephone surveys. Infants and children, key groups in risk assessment activities, were over-sampled. Survey participants (n = 5,011) provided time-activity information in 24-hour recall diaries and responded to supplemental questionnaires concerning potential exposures to specific pollutants, dwelling characteristics, and socio-economic factors. Results indicated that a majority of the time was spent indoors (88.9%), most of which was indoors at home, with limited time spent outdoors (5.8%) or in a vehicle (5.3%). Season, age, gender and rurality were significant predictors of time activity patterns. Compared to earlier data, adults reported spending more time indoors at home and adolescents reported spending less time outdoors, which could be indicative of broader societal trends. These findings have potentially important implications for assessment of exposure and risk. The CHAPS 2 data also provide much larger sample sizes to allow for improved precision and are more representative of infants, children and rural residents.

Travelers' Health: Immunocompromised Travelers

MedlinePlus

... clinical and epidemiologic studies are insufficient at this time to evaluate the actual risk of severe adverse effects associated with YF vaccine among recipients with limited immune deficits. If international travel requirements, and not true exposure risk, are the ...

Developmental timing of child maltreatment and symptoms of depression and suicidal ideation in young adulthood: Results from the National Longitudinal Study on Adolescent Health

PubMed Central

Dunn, Erin C.; McLaughlin, Katie A.; Slopen, Natalie; Rosand, Jonathan; Smoller, Jordan W.

2013-01-01

Background Child maltreatment is a potent risk factor for psychopathology. Although the developmental timing of first exposure to maltreatment is considered important in shaping risk of future psychopathology, no consensus exists on whether earlier or later exposures are more deleterious. This study examines whether age at first exposure to abuse is associated with subsequent depression and suicidal ideation. Methods Data were drawn from the National Longitudinal Study on Adolescent Health (n=15,701). Timing of first maltreatment exposure was classified using: (1) a crude measure capturing early childhood (0–5), middle childhood (6–10), or adolescence (11–17); and (2) a refined measure capturing infancy (0–2), preschool (3–5), latency (6–8), prepubertal (9–10), pubertal (11–13), or adolescence (14–17). We examined whether timing of first exposure was associated with depression and suicidal ideation in early adulthood in the entire sample and among those exposed to maltreatment. Results Respondents exposed to physical abuse at any age had a higher odds of depression and suicidal ideation in young adulthood than non-maltreated respondents. Among maltreated respondents, exposure during early childhood (0–5), particularly pre-school (3–5), was most strongly associated with depression. Respondents first exposed to physical abuse during preschool had a 77% increase in the odds of depression and those first exposed to sexual abuse during early childhood had a 146% increase in the odds of suicidal ideation compared to respondents maltreated as adolescents. Conclusions Developmental timing of first exposure to maltreatment influences risk for depression and suicidal ideation. Whether these findings are evidence for biologically-based sensitive periods requires further study. PMID:23592532

TREXMO: A Translation Tool to Support the Use of Regulatory Occupational Exposure Models.

PubMed

Savic, Nenad; Racordon, Dimitri; Buchs, Didier; Gasic, Bojan; Vernez, David

2016-10-01

Occupational exposure models vary significantly in their complexity, purpose, and the level of expertise required from the user. Different parameters in the same model may lead to different exposure estimates for the same exposure situation. This paper presents a tool developed to deal with this concern-TREXMO or TRanslation of EXposure MOdels. TREXMO integrates six commonly used occupational exposure models, namely, ART v.1.5, STOFFENMANAGER(®) v.5.1, ECETOC TRA v.3, MEASE v.1.02.01, EMKG-EXPO-TOOL, and EASE v.2.0. By enabling a semi-automatic translation between the parameters of these six models, TREXMO facilitates their simultaneous use. For a given exposure situation, defined by a set of parameters in one of the models, TREXMO provides the user with the most appropriate parameters to use in the other exposure models. Results showed that, once an exposure situation and parameters were set in ART, TREXMO reduced the number of possible outcomes in the other models by 1-4 orders of magnitude. The tool should manage to reduce the uncertain entry or selection of parameters in the six models, improve between-user reliability, and reduce the time required for running several models for a given exposure situation. In addition to these advantages, registrants of chemicals and authorities should benefit from more reliable exposure estimates for the risk characterization of dangerous chemicals under Regulation, Evaluation, Authorisation and restriction of CHemicals (REACH). © The Author 2016. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Environmental Exposure and Design Criteria for Offshore Oil and Gas Structures

DTIC Science & Technology

1980-05-01

reliability ar_alysis. Because there are no clear lines of demarcation between them, these methods are often used in varying combinations. Sound ...cludes that OCSEA-P not now effe.tively contribute...to the accrual of sound scientific information adequate for OCS management." One reason for such a...procedures for resolving differences need to be developed. Sound and timely assessments of environmental exposure risks will require: 1) adequate levels of

Overlay improvements using a real time machine learning algorithm

NASA Astrophysics Data System (ADS)

Schmitt-Weaver, Emil; Kubis, Michael; Henke, Wolfgang; Slotboom, Daan; Hoogenboom, Tom; Mulkens, Jan; Coogans, Martyn; ten Berge, Peter; Verkleij, Dick; van de Mast, Frank

2014-04-01

While semiconductor manufacturing is moving towards the 14nm node using immersion lithography, the overlay requirements are tightened to below 5nm. Next to improvements in the immersion scanner platform, enhancements in the overlay optimization and process control are needed to enable these low overlay numbers. Whereas conventional overlay control methods address wafer and lot variation autonomously with wafer pre exposure alignment metrology and post exposure overlay metrology, we see a need to reduce these variations by correlating more of the TWINSCAN system's sensor data directly to the post exposure YieldStar metrology in time. In this paper we will present the results of a study on applying a real time control algorithm based on machine learning technology. Machine learning methods use context and TWINSCAN system sensor data paired with post exposure YieldStar metrology to recognize generic behavior and train the control system to anticipate on this generic behavior. Specific for this study, the data concerns immersion scanner context, sensor data and on-wafer measured overlay data. By making the link between the scanner data and the wafer data we are able to establish a real time relationship. The result is an inline controller that accounts for small changes in scanner hardware performance in time while picking up subtle lot to lot and wafer to wafer deviations introduced by wafer processing.

SIMULATING ATMOSPHERIC EXPOSURE USING AN INNOVATIVE METEOROLOGICAL SAMPLING SCHEME

EPA Science Inventory

Multimedia Risk assessments require the temporal integration of atmospheric concentration and deposition estimates with other media modules. However, providing an extended time series of estimates is computationally expensive. An alternative approach is to substitute long-ter...

Biomedical and Human Factors Requirements for a Manned Earth-Orbiting Station

NASA Technical Reports Server (NTRS)

Reynolds, J. B.

1963-01-01

The study reported here has presented a measurement data pool for the determination of biomedical and behavioral effects of long-term exposure to weightlessness. This includes measures, techniques, equipment, and requirements in terms of weight, power, volume, time, crew activities, subsystem interfaces and experimental programs and designs, and confidence ratings for their effectiveness for determining weightlessness effects.

Characterizing the weathering induced changes in optical performance and properties of poly(ethylene-terephthalate) via MaPd:RTS spectroscopy

NASA Astrophysics Data System (ADS)

Gordon, Devin A.; DeNoyer, Lin; Meyer, Corey W.; Sweet, Noah W.; Burns, David M.; Bruckman, Laura S.; French, Roger H.

2017-08-01

Poly(ethylene-terephthalate) (PET) film is widely used in photovoltaic module backsheets for its dielectric break- down strength, and in applications requiring high optical clarity for its high transmission in the visible region. However, PET degrades and loses optical clarity under exposure to ultraviolet (UV) irradiance, heat, and moisture. Stabilizers are often included in PET formulation to increase its longevity; however, even these are subject to degradation and further reduce optical clarity. To study the weathering induced changes in the optical properties in PET films, samples of a UV-stabilized grade of PET were exposed to heat, moisture, and UV irradiance as prescribed by ASTM-G154 Cycle 4 for 168 hour time intervals. UV-Vis reflection and transmission spectra were collected via Multi-Angle, Polarization-Dependent, Reflection, Transmission, and Scattering (MaPd:RTS) spectroscopy after each exposure interval. The resulting spectra were used to calculate the complex index of refraction throughout the UV-Vis spectral region via an iterative optimization process based upon the Fresnel equations. The index of refraction and extinction coefficient were found to vary throughout the UV-Vis region with time under exposure. The spectra were also used to investigate changes in light scattering behavior with increasing exposure time. The intensity of scattered light was found to increase at higher angles with time under exposure.

Biologic Monitoring of Exposure to Environmental Chemicals throughout the Life Stages: Requirements and Issues for Consideration for the National Children’s Study

PubMed Central

Barr, Dana B.; Wang, Richard Y.; Needham, Larry L.

2005-01-01

Biomonitoring of exposure is a useful tool for assessing environmental exposures. The matrices available for analyses include blood, urine, breast milk, adipose tissue, and saliva, among others. The sampling can be staged to represent the particular time period of concern: preconceptionally from both parents, from a pregnant woman during each of the three trimesters, during and immediately after childbirth, from the mother postnatally, and from the child as it develops to 21 years of age. The appropriate sample for biomonitoring will depend upon matrix availability, the time period of concern for a particular exposure or health effect, and the different classes of environmental chemicals to be monitored. This article describes the matrices available for biomonitoring during the life stages being evaluated in the National Children’s Study; the best biologic matrices for exposure assessment for each individual chemical class, including consideration of alternative matrices; the analytical methods used for analysis, including quality control procedures and less costly alternatives; the costs of analysis; optimal storage conditions; and chemical and matrix stability during long-term storage. PMID:16079083

Inside the black box: starting to uncover the underlying decision rules used in one-by-one expert assessment of occupational exposure in case-control studies

PubMed Central

Wheeler, David C.; Burstyn, Igor; Vermeulen, Roel; Yu, Kai; Shortreed, Susan M.; Pronk, Anjoeka; Stewart, Patricia A.; Colt, Joanne S.; Baris, Dalsu; Karagas, Margaret R.; Schwenn, Molly; Johnson, Alison; Silverman, Debra T.; Friesen, Melissa C.

2014-01-01

Objectives Evaluating occupational exposures in population-based case-control studies often requires exposure assessors to review each study participants' reported occupational information job-by-job to derive exposure estimates. Although such assessments likely have underlying decision rules, they usually lack transparency, are time-consuming and have uncertain reliability and validity. We aimed to identify the underlying rules to enable documentation, review, and future use of these expert-based exposure decisions. Methods Classification and regression trees (CART, predictions from a single tree) and random forests (predictions from many trees) were used to identify the underlying rules from the questionnaire responses and an expert's exposure assignments for occupational diesel exhaust exposure for several metrics: binary exposure probability and ordinal exposure probability, intensity, and frequency. Data were split into training (n=10,488 jobs), testing (n=2,247), and validation (n=2,248) data sets. Results The CART and random forest models' predictions agreed with 92–94% of the expert's binary probability assignments. For ordinal probability, intensity, and frequency metrics, the two models extracted decision rules more successfully for unexposed and highly exposed jobs (86–90% and 57–85%, respectively) than for low or medium exposed jobs (7–71%). Conclusions CART and random forest models extracted decision rules and accurately predicted an expert's exposure decisions for the majority of jobs and identified questionnaire response patterns that would require further expert review if the rules were applied to other jobs in the same or different study. This approach makes the exposure assessment process in case-control studies more transparent and creates a mechanism to efficiently replicate exposure decisions in future studies. PMID:23155187

Occupational noise exposure of nightclub bar employees in Ireland.

PubMed

Kelly, Aoife C; Boyd, Sara M; Henehan, Gary T M; Chambers, Gordon

2012-01-01

Due to the transposition of the EU Directive 2003/10/EC into Irish Law, the entertainment sector was obligated to comply with the requirements of the Safety, Health and Welfare at Work (General Application) Regulations 2007, Chapter 1 Part 5: Control of Noise at Work since February 2008. Compliance with the Noise Regulations was examined in 9 nightclubs in Ireland. The typical daily noise exposure of 19 bar employees was measured using 2 logging dosimeters and a Type 1 fixed position sound level meter. Physical site inspections identified nightclub noise control measures. Interviews and questionnaires were used to assess the managers and employees awareness of the noise legislation. The average bar employee daily noise exposure (L(EX, 8h)) was 92 dBA, almost 4 times more than the accepted legal limit. None of the venues examined were fully compliant with the requirements of the 2007 Noise Regulations, and awareness of this legislation was limited.

Risks, risk assessment and risk competence in toxicology

PubMed Central

Stahlmann, Ralf; Horvath, Aniko

2015-01-01

Understanding the toxic effects of xenobiotics requires sound knowledge of physiology and biochemistry. The often described lack of understanding pharmacology/toxicology is therefore primarily caused by the general absence of the necessary fundamental knowledge. Since toxic effects depend on exposure (or dosage) assessing the risks arising from toxic substances also requires quantitative reasoning. Typically public discussions nearly always neglect quantitative aspects and laypersons tend to disregard dose-effect-relationships. One of the main reasons for such disregard is the fact that exposures often occur at extremely low concentrations that can only be perceived intellectually but not by the human senses. However, thresholds in the low exposure range are often scientifically disputed. At the same time, ignorance towards known dangers is wide-spread. Thus, enhancing the risk competence of laypersons will have to be initially restricted to increasing the awareness of existing problems. PMID:26195922

The Epigenetic Link between Prenatal Adverse Environments and Neurodevelopmental Disorders

PubMed Central

Kundakovic, Marija; Jaric, Ivana

2017-01-01

Prenatal adverse environments, such as maternal stress, toxicological exposures, and viral infections, can disrupt normal brain development and contribute to neurodevelopmental disorders, including schizophrenia, depression, and autism. Increasing evidence shows that these short- and long-term effects of prenatal exposures on brain structure and function are mediated by epigenetic mechanisms. Animal studies demonstrate that prenatal exposure to stress, toxins, viral mimetics, and drugs induces lasting epigenetic changes in the brain, including genes encoding glucocorticoid receptor (Nr3c1) and brain-derived neurotrophic factor (Bdnf). These epigenetic changes have been linked to changes in brain gene expression, stress reactivity, and behavior, and often times, these effects are shown to be dependent on the gestational window of exposure, sex, and exposure level. Although evidence from human studies is more limited, gestational exposure to environmental risks in humans is associated with epigenetic changes in peripheral tissues, and future studies are required to understand whether we can use peripheral biomarkers to predict neurobehavioral outcomes. An extensive research effort combining well-designed human and animal studies, with comprehensive epigenomic analyses of peripheral and brain tissues over time, will be necessary to improve our understanding of the epigenetic basis of neurodevelopmental disorders. PMID:28335457

Emergency Dose Estimation Using Optically Stimulated Luminescence from Human Tooth Enamel.

PubMed

Sholom, S; Dewitt, R; Simon, S L; Bouville, A; McKeever, S W S

2011-09-01

Human teeth were studied for potential use as emergency Optically Stimulated Luminescence (OSL) dosimeters. By using multiple-teeth samples in combination with a custom-built sensitive OSL reader, (60)Co-equivalent doses below 0.64 Gy were measured immediately after exposure with the lowest value being 27 mGy for the most sensitive sample. The variability of OSL sensitivity, from individual to individual using multiple-teeth samples, was determined to be 53%. X-ray and beta exposure were found to produce OSL curves with the same shape that differed from those due to ultraviolet (UV) exposure; as a result, correlation was observed between OSL signals after X-ray and beta exposure and was absent if compared to OSL signals after UV exposure. Fading of the OSL signal was "typical" for most teeth with just a few of incisors showing atypical behavior. Typical fading dependences were described by a bi-exponential decay function with "fast" (decay time around of 12 min) and "slow" (decay time about 14 h) components. OSL detection limits, based on the techniques developed to-date, were found to be satisfactory from the point-of-view of medical triage requirements if conducted within 24 hours of the exposure.

Are Canadian youth still exposed to second-hand smoke in homes and in cars?

PubMed

Barisic, A; Leatherdale, S T; Burkhalter, R; Ahmed, R

2014-07-01

The objective of this manuscript is to examine the prevalence of youth exposed to second-hand smoke (SHS) in homes and cars, changes in SHS exposure over time, and factors associated with beliefs youth hold regarding SHS exposure among a nationally representative sample of Canadian youth. Descriptive analysis of SHS exposure in homes and cars was conducted using data from the Canadian Youth Smoking Survey (2004, 2006 and 2008). Logistic regression was conducted to examine factors associated with beliefs youth had about SHS exposure in 2008. In 2008, 21.5% of youth reported being exposed to SHS in their home on a daily or almost daily basis, while 27.3% reported being exposed to SHS while riding in a car at least once in the previous week. Between 2004 and 2008, the prevalence of daily SHS exposure in the home and cars decreased by 4.7% and 18.0% respectively. Despite reductions in SHS exposure over time, a substantial number of Canadian youth continue to be exposed to SHS in homes and cars. Further effort is required to implement and evaluate policies designed to protect youth from SHS.

Giving cosmic redshift drift a whirl

NASA Astrophysics Data System (ADS)

Kim, Alex G.; Linder, Eric V.; Edelstein, Jerry; Erskine, David

2015-03-01

Redshift drift provides a direct kinematic measurement of cosmic acceleration but it occurs with a characteristic time scale of a Hubble time. Thus redshift observations with a challenging precision of 10-9 require a 10 year time span to obtain a signal-to-noise of 1. We discuss theoretical and experimental approaches to address this challenge, potentially requiring less observer time and having greater immunity to common systematics. On the theoretical side we explore allowing the universe, rather than the observer, to provide long time spans; speculative methods include radial baryon acoustic oscillations, cosmic pulsars, and strongly lensed quasars. On the experimental side, we explore beating down the redshift precision using differential interferometric techniques, including externally dispersed interferometers and spatial heterodyne spectroscopy. Low-redshift emission line galaxies are identified as having high cosmology leverage and systematics control, with an 8 h exposure on a 10-m telescope (1000 h of exposure on a 40-m telescope) potentially capable of measuring the redshift of a galaxy to a precision of 10-8 (few ×10-10). Low-redshift redshift drift also has very strong complementarity with cosmic microwave background measurements, with the combination achieving a dark energy figure of merit of nearly 300 (1400) for 5% (1%) precision on drift.

Heat wave exposure in India in current, 1.5 °C, and 2.0 °C worlds

NASA Astrophysics Data System (ADS)

Mishra, Vimal; Mukherjee, Sourav; Kumar, Rohini; Stone, Dáithí A.

2017-12-01

Heatwaves with large impacts have increased in the recent past and will continue to increase under future warming. However, the implication for population exposure to severe heatwaves remains unexplored. Here, we characterize maximum potential human exposure (without passive/active reduction measures) to severe heatwaves in India. We show that if the global mean temperature is limited to 2.0 °C above pre-industrial conditions, the frequency of severe heatwaves will rise by 30 times the current climate by the end-21st century. In contrast, the frequency is projected to be about 2.5 times more (than the low-warming scenario of 2 °C) under conditions expected if the RCP8.5 ‘business-as-usual’ emissions scenario is followed. Under the 2.0 °C low-warming target, population exposure to severe heatwaves is projected to increase by about 15 and 92 times the current level by the mid and end-21st century respectively. Strategies to reduce population growth in India during the 21st century may provide only limited mitigation of heatwave exposure mostly late in the century. Limiting global temperatures to 1.5 °C above preindustrial would reduce the exposure by half relative to RCP8.5 by the mid-21st century. If global temperatures are to exceed 1.5 °C then substantial measures will be required to offset the large increase in exposure to severe heatwaves in India.

Environmental Enrichment Duration Differentially Affects Behavior and Neuroplasticity in Adult Mice.

PubMed

Leger, Marianne; Paizanis, Eleni; Dzahini, Kwamivi; Quiedeville, Anne; Bouet, Valentine; Cassel, Jean-Christophe; Freret, Thomas; Schumann-Bard, Pascale; Boulouard, Michel

2015-11-01

Environmental enrichment is a powerful way to stimulate brain and behavioral plasticity. However the required exposure duration to reach such changes has not been substantially analyzed. We aimed to assess the time-course of appearance of the beneficial effects of enriched environment. Thus, different behavioral tests and neurobiological parameters (such as neurogenesis, brain monoamines levels, and stress-related hormones) were concomitantly realized after different durations of enriched environment (24 h, 1, 3, or 5 weeks). While short enrichment exposure (24 h) was sufficient to improve object recognition memory performances, a 3-week exposure was required to improve aversive stimulus-based memory performances and to reduce anxiety-like behavior; effects that were not observed with longer duration. The onset of behavioral changes after a 3-week exposure might be supported by higher serotonin levels in the frontal cortex, but seems independent of neurogenesis phenomenon. Additionally, the benefit of 3-week exposure on memory was not observed 3 weeks after cessation of enrichment. Thus, the 3-week exposure appears as an optimal duration in order to induce the most significant behavioral effects and to assess the underlying mechanisms. Altogether, these results suggest that the duration of exposure is a keystone of the beneficial behavioral and neurobiological effects of environmental enrichment. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

FDTD computation of human eye exposure to ultra-wideband electromagnetic pulses.

PubMed

Simicevic, Neven

2008-03-21

With an increase in the application of ultra-wideband (UWB) electromagnetic pulses in the communications industry, radar, biotechnology and medicine, comes an interest in UWB exposure safety standards. Despite an increase of the scientific research on bioeffects of exposure to non-ionizing UWB pulses, characterization of those effects is far from complete. A numerical computational approach, such as a finite-difference time domain (FDTD) method, is required to visualize and understand the complexity of broadband electromagnetic interactions. The FDTD method has almost no limits in the description of the geometrical and dispersive properties of the simulated material, it is numerically robust and appropriate for current computer technology. In this paper, a complete calculation of exposure of the human eye to UWB electromagnetic pulses in the frequency range of 3.1-10.6, 22-29 and 57-64 GHz is performed. Computation in this frequency range required a geometrical resolution of the eye of 0.1 mm and an arbitrary precision in the description of its dielectric properties in terms of the Debye model. New results show that the interaction of UWB pulses with the eye tissues exhibits the same properties as the interaction of the continuous electromagnetic waves (CWs) with the frequencies from the pulse's frequency spectrum. It is also shown that under the same exposure conditions the exposure to UWB pulses is from one to many orders of magnitude safer than the exposure to CW.

Evaluation of the Combined Effects of Heat and Lighting on the Level of Attention and Reaction Time: Climate Chamber Experiments in Iran.

PubMed

Mohebian, Zohreh; Farhang Dehghan, Somayeh; Dehghan, Habiballah

2018-01-01

Heat exposure and unsuitable lighting are two physical hazardous agents in many workplaces for which there are some evidences regarding their mental effects. The purpose of this study was to assess the combined effect of heat exposure and different lighting levels on the attention rate and reaction time in a climatic chamber. This study was conducted on 33 healthy students (17 M/16 F) with a mean (±SD) age of 22.1 ± 2.3 years. The attention and reaction time test were done by continuous performance test and the RT meter, respectively, in different exposure conditions including the dry temperatures (22°C and 37°C) and lighting levels (200, 500, and 1500 lux). Findings demonstrated that increase in heat and lighting level caused a decrease in average attention percentage and correct responses and increase in commission error, omission error, and response time ( P < 0.05). The average of simple, diagnostic, two-color selective, and two-sound selective reaction times increased after combined exposure to heat and lighting ( P < 0.05). The results of this study indicated that, in job task which requires using cognitive functions like attention, vigilance, concentration, cautiousness, and reaction time, the work environment must be optimized in terms of heat and lighting level.

Relation of concentration and exposure time to the efficacy of niclosamide against larval sea lampreys (Petromyzon marinus)

USGS Publications Warehouse

Scholefield, R.J.; Bergstedt, R.A.; Bills, T.D.

2003-01-01

The efficacy of 2’, 5-dichloro-4’-nitrosalicylanilide (niclosamide) at various concentrations and exposure times was tested against free-swimming larval sea lampreys (Petromyzon marinus) at 12°C and 17°C in Lake Huron water. Concentrations of niclosamide in test solutions ranged from 0.46 to 4.7 mg/L with pH 7.8 to 8.3, total alkalinity 78 to 88 mg/L as CaCO3, and total hardness 95 to 105 mg/L as CaCO3. In each test, six groups of larvae were exposed to a single concentration of niclosamide for times ranging from 30 s to 30 min. Exposure time was treated as the dose and, for each concentration tested, the exposure time necessary to kill 50 and 99.9% of larvae (ET50 and ET99.9) was determined. Linear regressions of the log10-transformed ET50 and ET99.9 on the log10-transformed niclosamide concentrations were significant at both temperatures with r2ranging from 0.94 to 0.98. The predicted ET50 ranged from 58 sec to 21.7 min and the ET99.9 ranged from 2.5 to 43.5 min across the concentrations and temperatures tested. Niclosamide required a significantly longer time to kill larvae at 12°C than at 17°C.

Environmental asbestos exposure sources in Korea

PubMed Central

2016-01-01

Background Because of the long asbestos-related disease latencies (10–50 years), detection, diagnosis, and epidemiologic studies require asbestos exposure history. However, environmental asbestos exposure source (EAES) data are lacking. Objectives To survey the available data for past EAES and supplement these data with interviews. Methods We constructed an EAES database using a literature review and interviews of experts, former traders, and workers. Exposure sources by time period and type were visualized using a geographic information system (ArcGIS), web-based mapping (Google Maps), and OpenWeatherMap. The data were mounted in the GIS to show the exposure source location and trend. Results The majority of asbestos mines, factories, and consumption was located in Chungnam; Gyeonggi, Busan, and Gyeongnam; and Gyeonggi, Daejeon, and Busan, respectively. Shipbuilding and repair companies were mostly located in Busan and Gyeongnam. Conclusions These tools might help evaluate past exposure from EAES and estimate the future asbestos burden in Korea. PMID:27726756

Environmental asbestos exposure sources in Korea.

PubMed

Kang, Dong-Mug; Kim, Jong-Eun; Kim, Ju-Young; Lee, Hyun-Hee; Hwang, Young-Sik; Kim, Young-Ki; Lee, Yong-Jin

2016-10-01

Because of the long asbestos-related disease latencies (10-50 years), detection, diagnosis, and epidemiologic studies require asbestos exposure history. However, environmental asbestos exposure source (EAES) data are lacking. To survey the available data for past EAES and supplement these data with interviews. We constructed an EAES database using a literature review and interviews of experts, former traders, and workers. Exposure sources by time period and type were visualized using a geographic information system (ArcGIS), web-based mapping (Google Maps), and OpenWeatherMap. The data were mounted in the GIS to show the exposure source location and trend. The majority of asbestos mines, factories, and consumption was located in Chungnam; Gyeonggi, Busan, and Gyeongnam; and Gyeonggi, Daejeon, and Busan, respectively. Shipbuilding and repair companies were mostly located in Busan and Gyeongnam. These tools might help evaluate past exposure from EAES and estimate the future asbestos burden in Korea.

Personal exposure to ultrafine particles: the influence of time-activity patterns.

PubMed

Buonanno, G; Stabile, L; Morawska, L

2014-01-15

Exposure to ultrafine particles (UFPs) is deemed to be a major risk affecting human health. Therefore, airborne particle studies were performed in the recent years to evaluate the most critical micro-environments, as well as identifying the main UFP sources. Nonetheless, in order to properly evaluate the UFP exposure, personal monitoring is required as the only way to relate particle exposure levels to the activities performed and micro-environments visited. To this purpose, in the present work, the results of experimental analysis aimed at showing the effect of the time-activity patterns on UFP personal exposure are reported. In particular, 24 non-smoking couples (12 during winter and summer time, respectively), comprised of a man who worked full-time and a woman who was a homemaker, were analyzed using personal particle counter and GPS monitors. Each couple was investigated for a 48-h period, during which they also filled out a diary reporting the daily activities performed. Time activity patterns, particle number concentration exposure and the related dose received by the participants, in terms of particle alveolar-deposited surface area, were measured. The average exposure to particle number concentration was higher for women during both summer and winter (Summer: women 1.8 × 10(4) part. cm(-3); men 9.2 × 10(3) part. cm(-3); Winter: women 2.9 × 10(4) part. cm(-3); men 1.3 × 10(4) part. cm(-3)), which was likely due to the time spent undertaking cooking activities. Staying indoors after cooking also led to higher alveolar-deposited surface area dose for both women and men during the winter time (9.12 × 10(2) and 6.33 × 10(2) mm(2), respectively), when indoor ventilation was greatly reduced. The effect of cooking activities was also detected in terms of women's dose intensity (dose per unit time), being 8.6 and 6.6 in winter and summer, respectively. On the contrary, the highest dose intensity activity for men was time spent using transportation (2.8 in both winter and summer). © 2013.

Efficient storage, computation, and exposure of computer-generated holograms by electron-beam lithography.

PubMed

Newman, D M; Hawley, R W; Goeckel, D L; Crawford, R D; Abraham, S; Gallagher, N C

1993-05-10

An efficient storage format was developed for computer-generated holograms for use in electron-beam lithography. This method employs run-length encoding and Lempel-Ziv-Welch compression and succeeds in exposing holograms that were previously infeasible owing to the hologram's tremendous pattern-data file size. These holograms also require significant computation; thus the algorithm was implemented on a parallel computer, which improved performance by 2 orders of magnitude. The decompression algorithm was integrated into the Cambridge electron-beam machine's front-end processor.Although this provides much-needed ability, some hardware enhancements will be required in the future to overcome inadequacies in the current front-end processor that result in a lengthy exposure time.

Long Duration Exposure Facility (LDEF) structural verification test report

NASA Technical Reports Server (NTRS)

Jones, T. C.; Lucy, M. H.; Shearer, R. L.

1983-01-01

Structural load tests on the Long Duration Exposure Facility's (LDEF) primary structure were conducted. These tests had three purposes: (1) demonstrate structural adequacy of the assembled LDEF primary structure when subjected to anticipated flight loads; (2) verify analytical models and methods used in loads and stress analysis; and (3) perform tests to comply with the Space Transportation System (STS) requirements. Test loads were based on predicted limit loads which consider all flight events. Good agreement is shown between predicted and observed load, strain, and deflection data. Test data show that the LDEF structure was subjected to 1.2 times limit load to meet the STS requirements. The structural adequacy of the LDEF is demonstrated.

DESIGN OF EXPOSURE MEASUREMENTS FOR EPIDEMIOLOGIC STUDIES

EPA Science Inventory

This presentation will describe the following items: (1) London daily air pollution and deaths that demonstrate how time series epidemiology can indicate that air pollution caused death; (2) Sophisticated statistical models required to establish this relationship for lower pollut...

HYDROCARBON SPILL EXPOSURE ASSESSMENT MODELING

EPA Science Inventory

Hydrocarbon spills impact drinking water supplies at down gradient locations. onventional finite difference and finite element models of multiphase, multicomponent flow have extreme requirements for both computer time and site data. ite data and the intent of the modeling often d...

EXPOSURE ASSESSMENT MODELING FOR HYDROCARBON SPILLS INTO THE SUBSURFACE

EPA Science Inventory

Hydrocarbons which enter the subsurface through spills or leaks may create serious, long-lived ground-water contamination problems. onventional finite difference and finite element models of multiphase, multicomponent flow often have extreme requirements for both computer time an...

A methyltransferase required for proper timing of the vernalization response in Arabidopsis

DOE PAGES

Lee, Joohyun; Yun, Jae-Young; Zhao, Wei; ...

2015-01-20

Prolonged exposure to winter cold enables flowering in many plant species through a process called vernalization. In Arabidopsis, vernalization results from the epigenetic silencing of the floral repressor FLOWERING LOCUS C (FLC) via a Polycomb Repressive Complex 2 (PRC2)-mediated increase in the density of the epigenetic silencing mark H3K27me3 at FLC chromatin. During cold exposure, a gene encoding a unique, cold-specific PRC2 component, VERNALIZATION INSENSITIVE 3 (VIN3), which is necessary for PRC2-mediated silencing of FLC, is induced. In this paper, we show that SET DOMAIN GROUP 7 (SDG7) is required for proper timing of VIN3 induction and of the vernalizationmore » process. Loss of SDG7 results in a vernalization-hypersensitive phenotype, as well as more rapid cold-mediated up-regulation of VIN3. In the absence of cold, loss of SDG7 results in elevated levels of long noncoding RNAs, which are thought to participate in epigenetic repression of FLC. Furthermore, loss of SDG7 results in increased H3K27me3 deposition on FLC chromatin in the absence of cold exposure and enhanced H3K27me3 spreading during cold treatment. In conclusion, SDG7 is a negative regulator of vernalization, and loss of SDG7 creates a partially vernalized state without cold exposure.« less

40 CFR 158.1050 - Post-application exposure-general requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1050 Post-application exposure... by the Occupational Safety and Health Administration, provide adequate protection for a particular pesticide use pattern, post-application exposure data may not be required for that use pattern. Applicants...

40 CFR 158.1050 - Post-application exposure-general requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1050 Post-application exposure... by the Occupational Safety and Health Administration, provide adequate protection for a particular pesticide use pattern, post-application exposure data may not be required for that use pattern. Applicants...

40 CFR 158.1050 - Post-application exposure-general requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1050 Post-application exposure... by the Occupational Safety and Health Administration, provide adequate protection for a particular pesticide use pattern, post-application exposure data may not be required for that use pattern. Applicants...

40 CFR 158.1050 - Post-application exposure-general requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1050 Post-application exposure... by the Occupational Safety and Health Administration, provide adequate protection for a particular pesticide use pattern, post-application exposure data may not be required for that use pattern. Applicants...

40 CFR 158.1050 - Post-application exposure-general requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1050 Post-application exposure... by the Occupational Safety and Health Administration, provide adequate protection for a particular pesticide use pattern, post-application exposure data may not be required for that use pattern. Applicants...

Effects of Age, Season, Gender and Urban-Rural Status on Time-Activity: Canadian Human Activity Pattern Survey 2 (CHAPS 2)

PubMed Central

Matz, Carlyn J.; Stieb, David M.; Davis, Karelyn; Egyed, Marika; Rose, Andreas; Chou, Benedito; Brion, Orly

2014-01-01

Estimation of population exposure is a main component of human health risk assessment for environmental contaminants. Population-level exposure assessments require time-activity pattern distributions in relation to microenvironments where people spend their time. Societal trends may have influenced time-activity patterns since previous Canadian data were collected 15 years ago. The Canadian Human Activity Pattern Survey 2 (CHAPS 2) was a national survey conducted in 2010–2011 to collect time-activity information from Canadians of all ages. Five urban and two rural locations were sampled using telephone surveys. Infants and children, key groups in risk assessment activities, were over-sampled. Survey participants (n = 5,011) provided time-activity information in 24-hour recall diaries and responded to supplemental questionnaires concerning potential exposures to specific pollutants, dwelling characteristics, and socio-economic factors. Results indicated that a majority of the time was spent indoors (88.9%), most of which was indoors at home, with limited time spent outdoors (5.8%) or in a vehicle (5.3%). Season, age, gender and rurality were significant predictors of time activity patterns. Compared to earlier data, adults reported spending more time indoors at home and adolescents reported spending less time outdoors, which could be indicative of broader societal trends. These findings have potentially important implications for assessment of exposure and risk. The CHAPS 2 data also provide much larger sample sizes to allow for improved precision and are more representative of infants, children and rural residents. PMID:24557523

Operational risk assessment.

PubMed

McKim, Vicky L

2017-06-01

In the world of risk management, which encompasses the business continuity disciplines, many types of risk require evaluation. Financial risk is most often the primary focus, followed by product and market risks. Another critical area, which typically lacks a thorough review or may be overlooked, is operational risk. This category encompasses many risk exposure types including those around building structures and systems, environmental issues, nature, neighbours, clients, regulatory compliance, network, data security and so on. At times, insurance carriers will assess internal hazards, but seldom do these assessments include more than a cursory look at other types of operational risk. In heavily regulated environments, risk assessments are required but may not always include thorough assessments of operational exposures. Vulnerabilities may linger or go unnoticed, only to become the catalyst for a business disruption at a later time, some of which are so severe that business recovery becomes nearly impossible. Businesses may suffer loss of clients as the result of a prolonged disruption of services. Comprehensive operational risk assessments can assist in identifying such vulnerabilities, exposures and threats so that the risk can be minimised or removed. This paper lays out how an assessment of this type can be successfully conducted.

33 CFR 149.327 - What are the approval requirements for work vests and anti-exposure (deck) suits?

Code of Federal Regulations, 2012 CFR

2012-07-01

... requirements for work vests and anti-exposure (deck) suits? 149.327 Section 149.327 Navigation and Navigable... approval requirements for work vests and anti-exposure (deck) suits? All work vests and anti-exposure (deck... as a work vest; (b) Approval series 160.053 or 160.153 as an anti-exposure suit; or (c) Approval...

33 CFR 149.327 - What are the approval requirements for work vests and anti-exposure (deck) suits?

Code of Federal Regulations, 2013 CFR

2013-07-01

... requirements for work vests and anti-exposure (deck) suits? 149.327 Section 149.327 Navigation and Navigable... approval requirements for work vests and anti-exposure (deck) suits? All work vests and anti-exposure (deck... as a work vest; (b) Approval series 160.053 or 160.153 as an anti-exposure suit; or (c) Approval...

33 CFR 149.327 - What are the approval requirements for work vests and anti-exposure (deck) suits?

Code of Federal Regulations, 2010 CFR

2010-07-01

... requirements for work vests and anti-exposure (deck) suits? 149.327 Section 149.327 Navigation and Navigable... approval requirements for work vests and anti-exposure (deck) suits? All work vests and anti-exposure (deck... as a work vest; (b) Approval series 160.053 or 160.153 as an anti-exposure suit; or (c) Approval...

33 CFR 149.327 - What are the approval requirements for work vests and anti-exposure (deck) suits?

Code of Federal Regulations, 2014 CFR

2014-07-01

... requirements for work vests and anti-exposure (deck) suits? 149.327 Section 149.327 Navigation and Navigable... approval requirements for work vests and anti-exposure (deck) suits? All work vests and anti-exposure (deck... as a work vest; (b) Approval series 160.053 or 160.153 as an anti-exposure suit; or (c) Approval...

33 CFR 149.327 - What are the approval requirements for work vests and anti-exposure (deck) suits?

Code of Federal Regulations, 2011 CFR

2011-07-01

... requirements for work vests and anti-exposure (deck) suits? 149.327 Section 149.327 Navigation and Navigable... approval requirements for work vests and anti-exposure (deck) suits? All work vests and anti-exposure (deck... as a work vest; (b) Approval series 160.053 or 160.153 as an anti-exposure suit; or (c) Approval...

Utilising shade to optimize UV exposure for vitamin D

NASA Astrophysics Data System (ADS)

Turnbull, D. J.; Parisi, A. V.

2008-01-01

Numerous studies have stated that humans need to utilise full sun radiation, at certain times of the day, to assist the body in synthesising the required levels of vitamin D3. The time needed to be spent in the full sun depends on a number of factors, for example, age, skin type, latitude, solar zenith angle. Current Australian guidelines suggest exposure to approximately 1/6 to 1/3 of a minimum erythemal dose (MED), depending on age, would be appropriate to provide adequate vitamin D3 levels. The aim of the study was to determine the exposure times to diffuse solar UV to receive exposures of 1/6 and 1/3 MED for a changing solar zenith angle in order to assess the possible role that diffuse UV (scattered radiation) may play in vitamin D3 effective UV exposures (UVD3). Diffuse and global erythemal UV measurements were conducted at five minute intervals over a twelve month period for a solar zenith angle range of 4° to 80° at a latitude of 27.6° S. For diffuse UV exposures of 1/6 and 1/3 MED, solar zenith angles smaller than 60° and 50° respectively can be utilised for exposure times of less than 10 min. Spectral measurements showed that, for a solar zenith angle of 40°, the UVA (315-400 nm) in the diffuse component of the solar UV is reduced by approximately 62% compared to the UVA in the global UV, whereas UVD3 wavelengths are only reduced by approximately 43%. At certain latitudes, diffuse UV under shade may play an important role in providing the human body with adequate levels of UVD3 (290-330 nm) radiation without experiencing the high levels of damaging UVA observed in full sun.

Utilising shade to optimize UV exposure for vitamin D

NASA Astrophysics Data System (ADS)

Turnbull, D. J.; Parisi, A. V.

2008-06-01

Numerous studies have stated that humans need to utilise full sun radiation, at certain times of the day, to assist the body in synthesising the required levels of vitamin D3. The time needed to be spent in the full sun depends on a number of factors, for example, age, skin type, latitude, solar zenith angle. Current Australian guidelines suggest exposure to approximately 1/6 to 1/3 of a minimum erythemal dose (MED), depending on age, would be appropriate to provide adequate vitamin D3 levels. The aim of the study was to determine the exposure times to diffuse solar UV to receive exposures of 1/6 and 1/3 MED for a changing solar zenith angle in order to assess the possible role that diffuse UV (scattered radiation) may play in vitamin D3 effective UV exposures (UVD3). Diffuse and global erythemal UV measurements were conducted at five minute intervals over a twelve month period for a solar zenith angle range of 4° to 80° at a latitude of 27.6° S. For a diffuse UV exposure of 1/3 MED, solar zenith angles smaller than approximately 50° can be utilised for exposure times of less than 10 min. Spectral measurements showed that, for a solar zenith angle of 40°, the UVA (315-400 nm) in the diffuse component of the solar UV is reduced by approximately 62% compared to the UVA in the global UV, whereas UVD3 wavelengths are only reduced by approximately 43%. At certain latitudes, diffuse UV under shade may play an important role in providing the human body with adequate levels of UVD3 (290-315 nm) radiation without experiencing the high levels of UVA observed in full sun.

Atmospheric Ionizing Radiation and Human Exposure

NASA Technical Reports Server (NTRS)

Wilson, John W.; Mertens, Christopher J.; Goldhagen, Paul; Friedberg, W.; DeAngelis, G.; Clem, J. M.; Copeland, K.; Bidasaria, H. B.

2005-01-01

Atmospheric ionizing radiation is of interest, apart from its main concern of aircraft exposures, because it is a principal source of human exposure to radiations with high linear energy transfer (LET). The ionizing radiations of the lower atmosphere near the Earth s surface tend to be dominated by the terrestrial radioisotopes. especially along the coastal plain and interior low lands, and have only minor contributions from neutrons (11 percent). The world average is substantially larger but the high altitude cities especially have substantial contributions from neutrons (25 to 45 percent). Understanding the world distribution of neutron exposures requires an improved understanding of the latitudinal, longitudinal, altitude and spectral distribution that depends on local terrain and time. These issues are being investigated in a combined experimental and theoretical program. This paper will give an overview of human exposures and describe the development of improved environmental models.

Atmospheric Ionizing Radiation and Human Exposure

NASA Technical Reports Server (NTRS)

Wilson, J. W.; Goldhagen, P.; Friedberg, W.; DeAngelis, G.; Clem, J. M.; Copeland, K.; Bidasaria, H. B.

2004-01-01

Atmospheric ionizing radiation is of interest, apart from its main concern of aircraft exposures, because it is a principal source of human exposure to radiations with high linear energy transfer (LET). The ionizing radiations of the lower atmosphere near the Earth s surface tend to be dominated by the terrestrial radioisotopes especially along the coastal plain and interior low lands and have only minor contributions from neutrons (11 percent). The world average is substantially larger but the high altitude cities especially have substantial contributions from neutrons (25 to 45 percent). Understanding the world distribution of neutron exposures requires an improved understanding of the latitudinal, longitudinal, altitude and spectral distribution that depends on local terrain and time. These issues are being investigated in a combined experimental and theoretical program. This paper will give an overview of human exposures and describe the development of improved environmental models.

Mars 520-d mission simulation reveals protracted crew hypokinesis and alterations of sleep duration and timing.

PubMed

Basner, Mathias; Dinges, David F; Mollicone, Daniel; Ecker, Adrian; Jones, Christopher W; Hyder, Eric C; Di Antonio, Adrian; Savelev, Igor; Kan, Kevin; Goel, Namni; Morukov, Boris V; Sutton, Jeffrey P

2013-02-12

The success of interplanetary human spaceflight will depend on many factors, including the behavioral activity levels, sleep, and circadian timing of crews exposed to prolonged microgravity and confinement. To address the effects of the latter, we used a high-fidelity ground simulation of a Mars mission to objectively track sleep-wake dynamics in a multinational crew of six during 520 d of confined isolation. Measurements included continuous recordings of wrist actigraphy and light exposure (4.396 million min) and weekly computer-based neurobehavioral assessments (n = 888) to identify changes in the crew's activity levels, sleep quantity and quality, sleep-wake periodicity, vigilance performance, and workload throughout the record-long 17 mo of mission confinement. Actigraphy revealed that crew sedentariness increased across the mission as evident in decreased waking movement (i.e., hypokinesis) and increased sleep and rest times. Light exposure decreased during the mission. The majority of crewmembers also experienced one or more disturbances of sleep quality, vigilance deficits, or altered sleep-wake periodicity and timing, suggesting inadequate circadian entrainment. The results point to the need to identify markers of differential vulnerability to hypokinesis and sleep-wake changes during the prolonged isolation of exploration spaceflight and the need to ensure maintenance of circadian entrainment, sleep quantity and quality, and optimal activity levels during exploration missions. Therefore, successful adaptation to such missions will require crew to transit in spacecraft and live in surface habitats that instantiate aspects of Earth's geophysical signals (appropriately timed light exposure, food intake, exercise) required for temporal organization and maintenance of human behavior.

40 CFR 158.250 - Experimental use permit data requirements for human exposure.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Experimental use permit data requirements for human exposure. 158.250 Section 158.250 Protection of Environment ENVIRONMENTAL PROTECTION... Experimental use permit data requirements for human exposure. No data for applicator exposure and post...

40 CFR 158.250 - Experimental use permit data requirements for human exposure.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Experimental use permit data requirements for human exposure. 158.250 Section 158.250 Protection of Environment ENVIRONMENTAL PROTECTION... Experimental use permit data requirements for human exposure. No data for applicator exposure and post...

40 CFR 158.250 - Experimental use permit data requirements for human exposure.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Experimental use permit data requirements for human exposure. 158.250 Section 158.250 Protection of Environment ENVIRONMENTAL PROTECTION... Experimental use permit data requirements for human exposure. No data for applicator exposure and post...

40 CFR 158.250 - Experimental use permit data requirements for human exposure.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Experimental use permit data requirements for human exposure. 158.250 Section 158.250 Protection of Environment ENVIRONMENTAL PROTECTION... Experimental use permit data requirements for human exposure. No data for applicator exposure and post...

Limits of Active Laser Triangulation as an Instrument for High Precision Plant Imaging

PubMed Central

Paulus, Stefan; Eichert, Thomas; Goldbach, Heiner E.; Kuhlmann, Heiner

2014-01-01

Laser scanning is a non-invasive method for collecting and parameterizing 3D data of well reflecting objects. These systems have been used for 3D imaging of plant growth and structure analysis. A prerequisite is that the recorded signals originate from the true plant surface. In this paper we studied the effects of species, leaf chlorophyll content and sensor settings on the suitability and accuracy of a commercial 660 nm active laser triangulation scanning device. We found that surface images of Ficus benjamina leaves were inaccurate at low chlorophyll concentrations and a long sensor exposure time. Imaging of the rough waxy leaf surface of leek (Allium porrum) was possible using very low exposure times, whereas at higher exposure times penetration and multiple refraction prevented the correct imaging of the surface. A comparison of scans with varying exposure time enabled the target-oriented analysis to identify chlorotic, necrotic and healthy leaf areas or mildew infestations. We found plant properties and sensor settings to have a strong influence on the accuracy of measurements. These interactions have to be further elucidated before laser imaging of plants is possible with the high accuracy required for e.g., the observation of plant growth or reactions to water stress. PMID:24504106

Membrane-aerated biofilm proton and oxygen flux during chemical toxin exposure.

PubMed

McLamore, E S; Zhang, W; Porterfield, D M; Banks, M K

2010-09-15

Bioreactors containing sessile bacteria (biofilms) grown on hollow fiber membranes have been used for treatment of many wastestreams. Real time operational control of bioreactor performance requires detailed knowledge of the relationship between bulk liquid water quality and physiological transport at the biofilm-liquid interface. Although large data sets exist describing membrane-aerated bioreactor effluent quality, very little real time data is available characterizing boundary layer transport under physiological conditions. A noninvasive, microsensor technique was used to quantify real time (≈1.5 s) changes in oxygen and proton flux for mature Nitrosomonas europaea and Pseudomonas aeruginosa biofilms in membrane-aerated bioreactors following exposure to environmental toxins. Stress response was characterized during exposure to toxins with known mode of action (chlorocarbonyl cyanide phenyl-hydrazone and potassium cyanide), and four environmental toxins (rotenone, 2,4-dinitrophenol, cadmium chloride, and pentachlorophenol). Exposure to sublethal concentrations of all environmental toxins caused significant increases in O(2) and/or H(+) flux (depending on the mode of action). These real time microscale signatures (i.e., fingerprints) of O(2) and H(+) flux can be coupled with bulk liquid analysis to improve our understanding of physiology in counter-diffusion biofilms found within membrane aerated bioreactors; leading to enhanced monitoring/modeling strategies for bioreactor control.

Potential exposure to Australian bat lyssavirus in south east Queensland: what has changed in 12 years?

PubMed

Young, Megan K; McCall, Bradley J

2010-09-01

Public health measures have been targeting potential exposure to Australian bat lyssavirus (ABLV) since the first recognised human cases, more than a decade ago. The effect of these measures on the epidemiology of notifications of potential exposure has not been investigated since 2003. Trends in notifications of potential exposure to ABLV reported to the Brisbane Southside Public Health Unit between November 1996 and October 2008 were examined. During the study period notification rates declined among all population groups and potential exposures were notified more promptly. The proportion of female notifications and the proportion of notifications from volunteer bat carers and their families and professional groups decreased over time. These changes over 12 years may indicate success of public health measures, under-reporting of potential exposure or both. Intentional handling of bats by untrained members of the public continues to be an important source of potential exposure to ABLV and requires a sustained public health response.

Strategies for Proximal Femoral Nailing of Unstable Intertrochanteric Fractures: Lateral Decubitus Position or Traction Table.

PubMed

Sonmez, Mesut Mehmet; Camur, Savas; Erturer, Erden; Ugurlar, Meric; Kara, Adnan; Ozturk, Irfan

2017-03-01

The aim of this prospective randomized study was to compare the traction table and lateral decubitus position techniques in the management of unstable intertrochanteric fractures. Eighty-two patients with unstable intertrochanteric fractures between 2011 and 2013 were included in this study. All patients were treated surgically with the Proximal Femoral Nail Antirotation implant (DePuy Synthes). Patients were randomized to undergo the procedure in the lateral decubitus position (42 patients) or with the use of a traction table (40 patients). Patients whose procedure was not performed entirely with a semi-invasive method or who required the use of additional fixation materials, such as cables, were excluded from the study. The groups were compared on the basis of the setup time, surgical time, fluoroscopic exposure time, tip-to-apex distance, collodiaphyseal angle, and modified Baumgaertner criteria for radiologic reduction. The setup time, surgical time, and fluoroscopic exposure time were lower and the differences were statistically significant in the lateral decubitus group compared with the traction table group. The collodiaphyseal angles were significantly different between the groups in favor of the lateral decubitus method. The tip-to-apex distance and the classification of reduction according to the modified Baumgaertner criteria did not demonstrate a statistically significant difference between the groups. The lateral decubitus position is used for most open procedures of the hip. We found that this position facilitates exposure for the surgical treatment of unstable intertrochanteric fractures and has advantages over the traction table in terms of set up time, surgical time and fluoroscopic exposure time.

Exploring the time course of face matching: temporal constraints impair unfamiliar face identification under temporally unconstrained viewing.

PubMed

Ozbek, Müge; Bindemann, Markus

2011-10-01

The identification of unfamiliar faces has been studied extensively with matching tasks, in which observers decide if pairs of photographs depict the same person (identity matches) or different people (mismatches). In experimental studies in this field, performance is usually self-paced under the assumption that this will encourage best-possible accuracy. Here, we examined the temporal characteristics of this task by limiting display times and tracking observers' eye movements. Observers were required to make match/mismatch decisions to pairs of faces shown for 200, 500, 1000, or 2000ms, or for an unlimited duration. Peak accuracy was reached within 2000ms and two fixations to each face. However, intermixing exposure conditions produced a context effect that generally reduced accuracy on identity mismatch trials, even when unlimited viewing of faces was possible. These findings indicate that less than 2s are required for face matching when exposure times are variable, but temporal constraints should be avoided altogether if accuracy is truly paramount. The implications of these findings are discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

SNR-based queue observations at CFHT

NASA Astrophysics Data System (ADS)

Devost, Daniel; Moutou, Claire; Manset, Nadine; Mahoney, Billy; Burdullis, Todd; Cuillandre, Jean-Charles; Racine, René

2016-07-01

In an effort to optimize the night time utilizing the exquisite weather on Maunakea, CFHT has equipped its dome with vents and is now moving its Queued Scheduled Observing (QSO)1 based operations toward Signal to Noise Ratio (SNR) observing. In this new mode, individual exposure times for a science program are estimated using a model that uses measurements of the weather conditions as input and the science program is considered completed when the depth required by the scientific requirements are reached. These changes allow CFHT to make better use of the excellent seeing conditions provided by Maunakea, allowing us to complete programs in a shorter time than allocated to the science programs.

Space Life Sciences at NASA: Spaceflight Health Policy and Standards

NASA Technical Reports Server (NTRS)

Davis, Jeffrey R.; House, Nancy G.

2006-01-01

In January 2005, the President proposed a new initiative, the Vision for Space Exploration. To accomplish the goals within the vision for space exploration, physicians and researchers at Johnson Space Center are establishing spaceflight health standards. These standards include fitness for duty criteria (FFD), permissible exposure limits (PELs), and permissible outcome limits (POLs). POLs delineate an acceptable maximum decrement or change in a physiological or behavioral parameter, as the result of exposure to the space environment. For example cardiovascular fitness for duty standards might be a measurable clinical parameter minimum that allows successful performance of all required duties. An example of a permissible exposure limit for radiation might be the quantifiable limit of exposure over a given length of time (e.g. life time radiation exposure). An example of a permissible outcome limit might be the length of microgravity exposure that would minimize bone loss. The purpose of spaceflight health standards is to promote operational and vehicle design requirements, aid in medical decision making during space missions, and guide the development of countermeasures. Standards will be based on scientific and clinical evidence including research findings, lessons learned from previous space missions, studies conducted in space analog environments, current standards of medical practices, risk management data, and expert recommendations. To focus the research community on the needs for exploration missions, NASA has developed the Bioastronautics Roadmap. The Bioastronautics Roadmap, NASA's approach to identification of risks to human space flight, revised baseline was released in February 2005. This document was reviewed by the Institute of Medicine in November 2004 and the final report was received in October 2005. The roadmap defines the most important research and operational needs that will be used to set policy, standards (define acceptable risk), and implement an overall Risk Management and Analysis process. Currently NASA is drafting spaceflight health standards for neurosensory alterations, space radiation exposure, behavioral health, muscle atrophy, cardiovascular fitness, immunological compromise, bone demineralization, and nutrition.

Effects of genistein in the maternal diet on reproductive development and spatial learning in male rats.

PubMed

Ball, Evan R; Caniglia, Mary Kay; Wilcox, Jenna L; Overton, Karla A; Burr, Marra J; Wolfe, Brady D; Sanders, Brian J; Wisniewski, Amy B; Wrenn, Craige C

2010-03-01

Endocrine disruptors, chemicals that disturb the actions of endogenous hormones, have been implicated in birth defects associated with hormone-dependent development. Phytoestrogens are a class of endocrine disruptors found in plants. In the current study we examined the effects of exposure at various perinatal time periods to genistein, a soy phytoestrogen, on reproductive development and learning in male rats. Dams were fed genistein-containing (5 mg/kg feed) food during both gestation and lactation, during gestation only, during lactation only, or during neither period. Measures of reproductive development and body mass were taken in the male offspring during postnatal development, and learning and memory performance was assessed in adulthood. Genistein exposure via the maternal diet decreased body mass in the male offspring of dams fed genistein during both gestation and lactation, during lactation only, but not during gestation only. Genistein decreased anogenital distance when exposure was during both gestation and lactation, but there was no effect when exposure was limited to one of these time periods. Similarly, spatial learning in the Morris water maze was impaired in male rats exposed to genistein during both gestation and lactation, but not in rats exposed during only one of these time periods. There was no effect of genistein on cued or contextual fear conditioning. In summary, the data indicate that exposure to genistein through the maternal diet significantly impacts growth in male offspring if exposure is during lactation. The effects of genistein on reproductive development and spatial learning required exposure throughout the pre- and postnatal periods. Copyright 2009 Elsevier Inc. All rights reserved.

ESTIMATION OF GIARDIA CT VALUES AT HIGH PH FOR THE SURFACE WATER TREATMENT RULE

EPA Science Inventory

The U.S. Environmental Protection Agency currently recommends Ct (disinfectant concentration multiplied by the exposure time) values to achieve required levels of inactivation of Giardia lamblia cysts by different disinfectants including free chlorine. Current guidance covers ina...

SIMULATING ATMOSPHERIC EXPOSURE IN A NATIONAL RISK ASSESSMENT USING AN INNOVATIVE METEOROLOGICAL SAMPLING SCHEME

EPA Science Inventory

Multimedia risk assessments require the temporal integration of atmospheric concentration and deposition with other media modules. However, providing an extended time series of estimates is computationally expensive. An alternative approach is to substitute long-term average a...

Scale models: A proven cost-effective tool for outage planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, R.; Segroves, R.

1995-03-01

As generation costs for operating nuclear stations have risen, more nuclear utilities have initiated efforts to improve cost effectiveness. Nuclear plant owners are also being challenged with lower radiation exposure limits and new revised radiation protection related regulations (10 CFR 20), which places further stress on their budgets. As source term reduction activities continue to lower radiation fields, reducing the amount of time spent in radiation fields becomes one of the most cost-effective ways of reducing radiation exposure. An effective approach for minimizing time spent in radiation areas is to use a physical scale model for worker orientation planning andmore » monitoring maintenance, modifications, and outage activities. To meet the challenge of continued reduction in the annual cumulative radiation exposures, new cost-effective tools are required. One field-tested and proven tool is the physical scale model.« less

[Development of a monitor for quantifying personal eye exposure to visible and ultraviolet radiation and its application in epidemiology].

PubMed

Eto, Norihito; Tsubota, Kazuo; Tanaka, Taichiro; Nishiwaki, Yuji

2013-01-01

Eye diseases including cataract, keratitis and pterygium have been reported to be sun-exposure-related. The association between macular degeneration and blue light has also been discussed. Moreover, it is hypothesized that retinal exposure to blue light may influence the human circadian rhythm. However, no monitoring devices exist that can measure eye exposure to visible and ultraviolet (UV) radiation over time. To measure the exact dose at specific times, we have developed a novel sensing system (ray-sensing glass system: RaySeG). RaySeG can continuously measure and record the composition and intensity of light with a time-stamped system. Subjects wearing RaySeG were instructed to walk under various light conditions such as indoor and outdoor. RaySeG consists of two sensors embedded in the eyeglasses. These sensors are for UV (260-400 nm), visible lights (red, 615 nm; green, 540 nm; and blue, 465 nm: peak wavelength for each). The total weight of the system is about 100 g, and the size is comparable to that of a digital audio player. The system continuously recorded changes in visible and UV light exposure under various conditions. After accuracy validation, further experiments with a larger number of subjects are required. Our final goal is to apply the system to evaluating personal eye exposure to UV and visible light in epidemiological studies of eye diseases and circadian rhythm abnormality.

THE EPA NATIONAL EXPOSURE RESEARCH LABORATORY CHILDREN'S PESTICIDE EXPOSURE MEASUREMENT PROGRAM

EPA Science Inventory

The U.S. EPA's National Exposure Research Laboratory (NERL) conducts research in support of the Food Quality Protection Act (FQPA) of 1996. FQPA requires that children's risks to pesticide exposures be considered during the tolerance-setting process. The Act requires exposure...

Focused and shifting attention in children with heavy prenatal alcohol exposure.

PubMed

Mattson, Sarah N; Calarco, Katherine E; Lang, Aimée R

2006-05-01

Attention deficits are a hallmark of the teratogenic effects of alcohol. However, characterization of these deficits remains inconclusive. Children with heavy prenatal alcohol exposure and nonexposed controls were evaluated using a paradigm consisting of three conditions: visual focus, auditory focus, and auditory-visual shift of attention. For the focus conditions, participants responded manually to visual or auditory targets. For the shift condition, participants alternated responses between visual targets and auditory targets. For the visual focus condition, alcohol-exposed children had lower accuracy and slower reaction time for all intertarget intervals (ITIs), while on the auditory focus condition, alcohol-exposed children were less accurate but displayed slower reaction time only on the longest ITI. Finally, for the shift condition, the alcohol-exposed group was accurate but had slowed reaction times. These results indicate that children with heavy prenatal alcohol exposure have pervasive deficits in visual focused attention and deficits in maintaining auditory attention over time. However, no deficits were noted in the ability to disengage and reengage attention when required to shift attention between visual and auditory stimuli, although reaction times to shift were slower. Copyright (c) 2006 APA, all rights reserved.

Considerations for the design and technical setup of a human whole-body exposure chamber.

PubMed

Monsé, Christian; Sucker, Kirsten; van Thriel, Christoph; Broding, Horst Christoph; Jettkant, Birger; Berresheim, Hans; Wiethege, Thorsten; Käfferlein, Heiko; Merget, Rolf; Bünger, Jürgen; Brüning, Thomas

2012-01-01

Exposures to air contaminants, such as chemical vapors and particulate matter, pose important health hazards at workplaces. Short-term experimental exposures to chemical vapors and particles in humans are a promising attempt to investigate acute effects of such hazards. However, a significant challenge in this field is the determination of effects of co-exposures to more than one chemical or mixtures of chemical vapors and/or particles. To overcome such a challenge, studies have to be conducted under standardized exposure characterization and real time measurements, if possible. A new exposure laboratory (ExpoLab) was installed at IPA, combining sophisticated engineering designs with new analytical techniques, to fulfill these requirements. Low-dose as well as high-dose exposure scenarios are achieved by means of a calibration-gas-generator. Exposure monitoring can be carried out with a high performance real time mass spectrometer and other suitable analyzers (e.g. gas chromatograph). Numerous automated security facilities guarantee the physical integrity of the volunteers, and the waste atmosphere is removed using either charcoal filtration or catalytic post-combustion. Measurements of sulfur hexafluoride, carbon dioxide, aniline and carbon black are presented to demonstrate the performance of the exposure unit with respect to the temporal and spatial stability of generated atmospheres. The variations of generated contents in the atmospheres at steady state are slightly higher than the measurement precision of the analyzers (the typical standard deviation of generated atmospheres is < 2%). The technical components of ExpoLab and its monitoring systems ensure high quality standards in validity and reliability of generating and measuring exposure atmospheres.

Pharmacodynamics of levofloxacin in a murine pneumonia model of Pseudomonas aeruginosa infection: determination of epithelial lining fluid targets.

PubMed

Louie, Arnold; Fregeau, Christine; Liu, Weiguo; Kulawy, Robert; Drusano, G L

2009-08-01

The dose choice for Pseudomonas aeruginosa remains a matter of debate. The actual exposure targets required for multilog killing of organisms at the primary infection site have not been delineated. We studied Pseudomonas aeruginosa PAO1 using a murine model of pneumonia. We employed a large mathematical model to fit all the concentration-time data in plasma and epithelial lining fluid (ELF) as well as colony counts in lung simultaneously for all drug doses. Penetration into ELF was calculated to be approximately 77.7%, as indexed to the ratio of the area under the concentration-time curve for ELF (AUC(ELF)) to the AUC(plasma). We determined the ELF concentration-time profile required to drive a stasis response as well as 1-, 2-, or 3-log(10)(CFU/g) kill. AUC/MIC ratios of 12.4, 31.2, 62.8, and 127.6 were required to drive these bacterial responses. Emergence of resistance was seen only at the two lowest doses (three of five animals at 50 mg/kg [body weight] and one of five animals at 100 mg/kg). The low exposure targets were likely driven by a low mutational frequency to resistance. Bridging to humans was performed using Monte Carlo simulation. With a 750-mg levofloxacin dose, target attainment rates fell below 90% at 4 mg/liter, 1 mg/liter, and 0.5 mg/liter for 1-, 2-, and 3-log kills, respectively. Given the low exposure targets seen with this strain, we conclude that levofloxacin at a 750-mg dose is not adequate for serious Pseudomonas aeruginosa pneumonia as a single agent. More isolates need to be studied to make these observations more robust.

Pharmacodynamics of Levofloxacin in a Murine Pneumonia Model of Pseudomonas aeruginosa Infection: Determination of Epithelial Lining Fluid Targets▿

PubMed Central

Louie, Arnold; Fregeau, Christine; Liu, Weiguo; Kulawy, Robert; Drusano, G. L.

2009-01-01

The dose choice for Pseudomonas aeruginosa remains a matter of debate. The actual exposure targets required for multilog killing of organisms at the primary infection site have not been delineated. We studied Pseudomonas aeruginosa PAO1 using a murine model of pneumonia. We employed a large mathematical model to fit all the concentration-time data in plasma and epithelial lining fluid (ELF) as well as colony counts in lung simultaneously for all drug doses. Penetration into ELF was calculated to be approximately 77.7%, as indexed to the ratio of the area under the concentration-time curve for ELF (AUCELF) to the AUCplasma. We determined the ELF concentration-time profile required to drive a stasis response as well as 1-, 2-, or 3-log10(CFU/g) kill. AUC/MIC ratios of 12.4, 31.2, 62.8, and 127.6 were required to drive these bacterial responses. Emergence of resistance was seen only at the two lowest doses (three of five animals at 50 mg/kg [body weight] and one of five animals at 100 mg/kg). The low exposure targets were likely driven by a low mutational frequency to resistance. Bridging to humans was performed using Monte Carlo simulation. With a 750-mg levofloxacin dose, target attainment rates fell below 90% at 4 mg/liter, 1 mg/liter, and 0.5 mg/liter for 1-, 2-, and 3-log kills, respectively. Given the low exposure targets seen with this strain, we conclude that levofloxacin at a 750-mg dose is not adequate for serious Pseudomonas aeruginosa pneumonia as a single agent. More isolates need to be studied to make these observations more robust. PMID:19364849

Emergency Dose Estimation Using Optically Stimulated Luminescence from Human Tooth Enamel

PubMed Central

Sholom, S.; DeWitt, R.; Simon, S.L.; Bouville, A.; McKeever, S.W.S.

2011-01-01

Human teeth were studied for potential use as emergency Optically Stimulated Luminescence (OSL) dosimeters. By using multiple-teeth samples in combination with a custom-built sensitive OSL reader, 60Co-equivalent doses below 0.64 Gy were measured immediately after exposure with the lowest value being 27 mGy for the most sensitive sample. The variability of OSL sensitivity, from individual to individual using multiple-teeth samples, was determined to be 53%. X-ray and beta exposure were found to produce OSL curves with the same shape that differed from those due to ultraviolet (UV) exposure; as a result, correlation was observed between OSL signals after X-ray and beta exposure and was absent if compared to OSL signals after UV exposure. Fading of the OSL signal was “typical” for most teeth with just a few of incisors showing atypical behavior. Typical fading dependences were described by a bi-exponential decay function with “fast” (decay time around of 12 min) and “slow” (decay time about 14 h) components. OSL detection limits, based on the techniques developed to-date, were found to be satisfactory from the point-of-view of medical triage requirements if conducted within 24 hours of the exposure. PMID:21949479

An efficient multiple exposure image fusion in JPEG domain

NASA Astrophysics Data System (ADS)

Hebbalaguppe, Ramya; Kakarala, Ramakrishna

2012-01-01

In this paper, we describe a method to fuse multiple images taken with varying exposure times in the JPEG domain. The proposed algorithm finds its application in HDR image acquisition and image stabilization for hand-held devices like mobile phones, music players with cameras, digital cameras etc. Image acquisition at low light typically results in blurry and noisy images for hand-held camera's. Altering camera settings like ISO sensitivity, exposure times and aperture for low light image capture results in noise amplification, motion blur and reduction of depth-of-field respectively. The purpose of fusing multiple exposures is to combine the sharp details of the shorter exposure images with high signal-to-noise-ratio (SNR) of the longer exposure images. The algorithm requires only a single pass over all images, making it efficient. It comprises of - sigmoidal boosting of shorter exposed images, image fusion, artifact removal and saturation detection. Algorithm does not need more memory than a single JPEG macro block to be kept in memory making it feasible to be implemented as the part of a digital cameras hardware image processing engine. The Artifact removal step reuses the JPEGs built-in frequency analysis and hence benefits from the considerable optimization and design experience that is available for JPEG.

Pregnant Women Models Analyzed for RF Exposure and Temperature Increase in 3T RF Shimmed Birdcages

PubMed Central

Murbach, Manuel; Neufeld, Esra; Samaras, Theodoros; Córcoles, Juan; Robb, Fraser J.; Kainz, Wolfgang; Kuster, Niels

2017-01-01

Purpose MRI is increasingly used to scan pregnant patients. We investigated the effect of 3 Tesla (T) two-port radiofrequency (RF) shimming in anatomical pregnant women models. Theory and Methods RF shimming improves B1+ uniformity, but may at the same time significantly alter the induced current distribution and result in large changes in both the level and location of the absorbed RF energy. In this study, we evaluated the electrothermal exposure of pregnant women in the third, seventh, and ninth month of gestation at various imaging landmarks in RF body coils, including modes with RF shimming. Results Although RF shimmed configurations may lower the local RF exposure for the mother, they can increase the thermal load on the fetus. In worst-case configurations, whole-body exposure and local peak temperatures—up to 40.8°C—are equal in fetus and mother. Conclusions Two-port RF shimming can significantly increase the fetal exposure in pregnant women, requiring further research to derive a very robust safety management. For the time being, restriction to the CP mode, which reduces fetal SAR exposure compared with linear-horizontal polarization modes, may be advisable. Results from this study do not support scanning pregnant patients above the normal operating mode. PMID:27174499

Indoor air quality in hospitality venues before and after implementation of a clean indoor air law--Western New York, 2003.

PubMed

2004-11-12

Secondhand smoke (SHS) contains more than 50 carcinogens. SHS exposure is responsible for an estimated 3,000 lung cancer deaths and more than 35,000 coronary heart disease deaths among never smokers in the United States each year, and for lower respiratory infections, asthma, sudden infant death syndrome, and chronic ear infections among children. Even short-term exposures to SHS, such as those that might be experienced by a patron in a restaurant or bar that allows smoking, can increase the risk of experiencing an acute cardiovascular event. Although population-based data indicate declining SHS exposure in the United States over time, SHS exposure remains a common but preventable public health hazard. Policies requiring smoke-free environments are the most effective method of reducing SHS exposure. Effective July 24, 2003, New York implemented a comprehensive state law requiring almost all indoor workplaces and public places (e.g., restaurants, bars, and other hospitality venues) to be smoke-free. This report describes an assessment of changes in indoor air quality that occurred in 20 hospitality venues in western New York where smoking or indirect SHS exposure from an adjoining room was observed at baseline. The findings indicate that, on average, levels of respirable suspended particles (RSPs), an accepted marker for SHS levels, decreased 84% in these venues after the law took effect. Comprehensive clean indoor air policies can rapidly and effectively reduce SHS exposure in hospitality venues.

Fabrication of cylindrical micro-parts using synchronous rotary scan-projection lithography and chemical etching

NASA Astrophysics Data System (ADS)

Ito, Kaiki; Suzuki, Yuta; Horiuchi, Toshiyuki

2017-07-01

Lithographical patterning on the surface of a fine pipe with a thin wall is required for fabricating three-dimensional micro-parts. For this reason, a new exposure system for printing patterns on a cylindrical pipe by synchronous rotary scan-projection exposure was developed. Using the exposure system, stent-like resist patterns with a width of 251 μm were printed on a surface of stainless-steel pipe with an outer diameter of 2 mm. The exposure time was 30 s. Next, the patterned pipe was chemically etched. As a result, a stent-like mesh pipe with a line width of 230 μm was fabricated. It was demonstrated that the new method had a potential to be applied to fabrications of stent and other cylindrical micro-parts.

A fast double shutter for CCD-based metrology

NASA Astrophysics Data System (ADS)

Geisler, R.

2017-02-01

Image based metrology such as Particle Image Velocimetry (PIV) depends on the comparison of two images of an object taken in fast succession. Cameras for these applications provide the so-called `double shutter' mode: One frame is captured with a short exposure time and in direct succession a second frame with a long exposure time can be recorded. The difference in the exposure times is typically no problem since illumination is provided by a pulsed light source such as a laser and the measurements are performed in a darkened environment to prevent ambient light from accumulating in the long second exposure time. However, measurements of self-luminous processes (e.g. plasma, combustion ...) as well as experiments in ambient light are difficult to perform and require special equipment (external shutters, highspeed image sensors, multi-sensor systems ...). Unfortunately, all these methods incorporate different drawbacks such as reduced resolution, degraded image quality, decreased light sensitivity or increased susceptibility to decalibration. In the solution presented here, off-the-shelf CCD sensors are used with a special timing to combine neighbouring pixels in a binning-like way. As a result, two frames of short exposure time can be captured in fast succession. They are stored in the on-chip vertical register in a line-interleaved pattern, read out in the common way and separated again by software. The two resultant frames are completely congruent; they expose no insensitive lines or line shifts and thus enable sub-pixel accurate measurements. A third frame can be captured at the full resolution analogue to the double shutter technique. Image based measurement techniques such as PIV can benefit from this mode when applied in bright environments. The third frame is useful e.g. for acceleration measurements or for particle tracking applications.

Optimization of camera exposure durations for multi-exposure speckle imaging of the microcirculation

PubMed Central

Kazmi, S. M. Shams; Balial, Satyajit; Dunn, Andrew K.

2014-01-01

Improved Laser Speckle Contrast Imaging (LSCI) blood flow analyses that incorporate inverse models of the underlying laser-tissue interaction have been used to develop more quantitative implementations of speckle flowmetry such as Multi-Exposure Speckle Imaging (MESI). In this paper, we determine the optimal camera exposure durations required for obtaining flow information with comparable accuracy with the prevailing MESI implementation utilized in recent in vivo rodent studies. A looping leave-one-out (LOO) algorithm was used to identify exposure subsets which were analyzed for accuracy against flows obtained from analysis with the original full exposure set over 9 animals comprising n = 314 regional flow measurements. From the 15 original exposures, 6 exposures were found using the LOO process to provide comparable accuracy, defined as being no more than 10% deviant, with the original flow measurements. The optimal subset of exposures provides a basis set of camera durations for speckle flowmetry studies of the microcirculation and confers a two-fold faster acquisition rate and a 28% reduction in processing time without sacrificing accuracy. Additionally, the optimization process can be used to identify further reductions in the exposure subsets for tailoring imaging over less expansive flow distributions to enable even faster imaging. PMID:25071956

NIOSH testimony to DOL on the Occupational Safety And Health Administration's proposed rule on occupational exposure to asbestos, tremolite, anthophyllite, and actinolite by J. D. Millar, January 24, 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1991-01-24

The testimony contains the comments of NIOSH regarding the proposed rule on occupational exposure to asbestos (1332214), tremolite (14567738), anthophyllite (17068789) and actinolite (77536664) exposures. NIOSH supports OSHA in proposing changes to the existing asbestos standard to minimize the risk of asbestos related diseases in workers. The current standard is insufficient to protect the health of workers exposed to asbestos, and the proposed changes represent a prudent and necessary approach to accomplish this goal. Specific topics addressed in the testimony include exposure limits for asbestos; methods for sampling and analysis of airborne fibers; use of time weighted averages to measuremore » exposure; use of engineering controls, good work practices and personal protective equipment; use of engineering controls and work practices for brake and clutch repair and service; required use of specific work practices during maintenance of vinyl asbestos floor tile; housekeeping; definitions of small scale and short duration operations; exemption of roofing operations from the requirement for negative pressure enclosures; communication among employers and owners; regulated areas for asbestos removal, maintenance, demolition, and renovation operations; use of glove bags; definition of competent person; and notification to OSHA and method of notification.« less

Speckle-field propagation in 'frozen' turbulence: brightness function approach

NASA Astrophysics Data System (ADS)

Dudorov, Vadim V.; Vorontsov, Mikhail A.; Kolosov, Valeriy V.

2006-08-01

Speckle-field long- and short-exposure spatial correlation characteristics for target-in-the-loop (TIL) laser beam propagation and scattering in atmospheric turbulence are analyzed through the use of two different approaches: the conventional Monte Carlo (MC) technique and the recently developed brightness function (BF) method. Both the MC and the BF methods are applied to analysis of speckle-field characteristics averaged over target surface roughness realizations under conditions of 'frozen' turbulence. This corresponds to TIL applications where speckle-field fluctuations associated with target surface roughness realization updates occur within a time scale that can be significantly shorter than the characteristic atmospheric turbulence time. Computational efficiency and accuracy of both methods are compared on the basis of a known analytical solution for the long-exposure mutual correlation function. It is shown that in the TIL propagation scenarios considered the BF method provides improved accuracy and requires significantly less computational time than the conventional MC technique. For TIL geometry with a Gaussian outgoing beam and Lambertian target surface, both analytical and numerical estimations for the speckle-field long-exposure correlation length are obtained. Short-exposure speckle-field correlation characteristics corresponding to propagation in 'frozen' turbulence are estimated using the BF method. It is shown that atmospheric turbulence-induced static refractive index inhomogeneities do not significantly affect the characteristic correlation length of the speckle field, whereas long-exposure spatial correlation characteristics are strongly dependent on turbulence strength.

Speckle-field propagation in 'frozen' turbulence: brightness function approach.

PubMed

Dudorov, Vadim V; Vorontsov, Mikhail A; Kolosov, Valeriy V

2006-08-01

Speckle-field long- and short-exposure spatial correlation characteristics for target-in-the-loop (TIL) laser beam propagation and scattering in atmospheric turbulence are analyzed through the use of two different approaches: the conventional Monte Carlo (MC) technique and the recently developed brightness function (BF) method. Both the MC and the BF methods are applied to analysis of speckle-field characteristics averaged over target surface roughness realizations under conditions of 'frozen' turbulence. This corresponds to TIL applications where speckle-field fluctuations associated with target surface roughness realization updates occur within a time scale that can be significantly shorter than the characteristic atmospheric turbulence time. Computational efficiency and accuracy of both methods are compared on the basis of a known analytical solution for the long-exposure mutual correlation function. It is shown that in the TIL propagation scenarios considered the BF method provides improved accuracy and requires significantly less computational time than the conventional MC technique. For TIL geometry with a Gaussian outgoing beam and Lambertian target surface, both analytical and numerical estimations for the speckle-field long-exposure correlation length are obtained. Short-exposure speckle-field correlation characteristics corresponding to propagation in 'frozen' turbulence are estimated using the BF method. It is shown that atmospheric turbulence-induced static refractive index inhomogeneities do not significantly affect the characteristic correlation length of the speckle field, whereas long-exposure spatial correlation characteristics are strongly dependent on turbulence strength.

Exposure of the surgeon's hands to radiation during hand surgery procedures.

PubMed

Żyluk, Andrzej; Puchalski, Piotr; Szlosser, Zbigniew; Dec, Paweł; Chrąchol, Joanna

2014-01-01

The objective of the study was to assess the time of exposure of the surgeon's hands to radiation and calculate of the equivalent dose absorbed during surgery of hand and wrist fractures with C-arm fluoroscope guidance. The necessary data specified by the objective of the study were acquired from operations of 287 patients with fractures of fingers, metacarpals, wrist bones and distal radius. 218 operations (78%) were percutaneous procedures and 60 (22%) were performed by open method. Data on the time of exposure and dose of radiation were acquired from the display of the fluoroscope, where they were automatically generated. These data were assigned to the individual patient, type of fracture, method of surgery and the operating surgeon. Fixations of distal radial fractures required longer times of radiation exposure (mean 61 sec.) than fractures of the wrist/metacarpals and fingers (38 and 32 sec., respectively), which was associated with absorption of significantly higher equivalent doses. Fixations of distal radial fractures by open method were associated with statistically significantly higher equivalent doses (0.41 mSv) than percutaneous procedures (0.3 mSv). Fixations of wrist and metacarpal bone fractures by open method were associated with lower equivalent doses (0.34 mSv) than percutaneous procedures (0.37 mSv),but the difference was not significant. Fixations of finger fractures by open method were associated with lower equivalent doses (0.13 mSv) than percutaneous procedures (0.24 mSv), the difference being statistically non-significant. Statistically significant differences in exposure time and equivalent doses were noted between 4 surgeons participating in the study, but no definitive relationship was found between these parameters and surgeons' employment time. 1. Hand surgery procedures under fluoroscopic guidance are associated with mild exposure of the surgeons' hands to radiation. 2. The equivalent dose was related to the type of fracture, operative technique and - to some degree - to the time of employment of the surgeon.

Shuttle to space station transfer of the materials exposure facility

NASA Technical Reports Server (NTRS)

Shannon, David T., Jr.; Klich, Phillip J.

1995-01-01

The Materials Exposure Facility (MEF) is being proposed by LaRC as the first long-term space materials exposure facility with real-time interaction with materials experiments in actual conditions of orbital space flight. The MEF is proposed as a Space Station external payload dedicated to technology advancement in spacecraft materials and coatings research. This paper will define a set of potential logistics for removing the MEF from the Shuttle cargo bay and the process required for transferring the MEF to a specific external payload site on Space Station Freedom (SSF). The SSF UF-2 configuration is used for this study. The kinematics and ability to successfully perform the appropriate MEF maneuvers required were verified. During completion of this work, the Space Station was redesigned and the International Space Station Alpha (ISSA) configuration evolved. The transfer procedure for SSF was valid for ISSA; however, a verification of kinematics and clearances was essential. Also, SSF and ISSA robotic interfaces with the Orbiter were different.

Exploring exposure to Agent Orange and increased mortality due to bladder cancer.

PubMed

Mossanen, Matthew; Kibel, Adam S; Goldman, Rose H

2017-11-01

During the Vietnam War, many veterans were exposed to Agent Orange (AO), a chemical defoliant containing varying levels of the carcinogen dioxin. The health effects of AO exposure have been widely studied in the VA population. Here we review and interpret data regarding the association between AO exposure and bladder cancer (BC) mortality. Data evaluating the association between AO and BC is limited. Methods characterizing exposure have become more sophisticated over time. Several studies support the link between AO exposure and increased mortality due to BC, including the Korean Veterans Health Study. Available data suggest an association with exposure to AO and increased mortality due to BC. In patients exposed to AO, increased frequency of cystoscopic surveillance and potentially more aggressive therapy for those with BC may be warranted but utility of these strategies remains to be proven. Additional research is required to better understand the relationship between AO and BC. Copyright © 2017 Elsevier Inc. All rights reserved.

EPA CHILDREN'S PESTICIDE EXPOSURE MEASUREMENT PROGRAM

EPA Science Inventory

The U.S. EPA's National Exposure Research Laboratory conducts research in support of the Food Quality Protection Act (FQPA) of 1996. FQPA requires that children's risks to pesticide exposures be considered during the tolerance-setting process. FQPA requires exposure assessme...

THE EPA CHILDREN'S PESTICIDE EXPOSURE MEASUREMENT PROGRAM

EPA Science Inventory

The U.S. EPA's National Exposure Research Laboratory conducts research in support of the Food Quality Protection Act (FQPA)) of 1996. FQPA requires that children's risks to pesticide exposures be considered during the tolerance-setting process. FQPA requires exposure assessme...

Timing of decontamination and treatment in case of percutaneous VX poisoning: a mini review.

PubMed

Joosen, Marloes J A; van der Schans, Marcel J; Kuijpers, Willem C; van Helden, Herman P M; Noort, Daan

2013-03-25

Low volatile organophosphorous nerve agents such as VX, will most likely enter the body via the skin. The pharmacokinetics of drugs such as oximes, atropine and diazepam, are not aligned with the variable and persistent toxicokinetics of the agent. Repeated administration of these drugs showed to improve treatment efficacy compared to a single injection treatment. Because of the effectiveness of continuous treatment, it was investigated to what extent a subchronic pretreatment with carbamate (pyridostigmine or physostigmine combined with either procyclidine or scopolamine) would protect against percutaneous VX exposure. Inclusion of scopolamine in the pretreatment prevented seizures in all animals, but none of the pretreatments affected survival time or the onset time of cholinergic signs. These results indicate that percutaneous poisoning with VX requires additional conventional treatment in addition to the current pretreatment regimen. Decontamination of VX-exposed skin is one of the most important countermeasures to mitigate the effects of the exposure. To evaluate the window of opportunity for decontamination, the fielded skin decontaminant Reactive Skin Decontaminant Lotion (RSDL) was tested at different times in hairless guinea pigs percutaneously challenged with 4× LD50 VX in IPA. The results showed that RSDL decontamination at 15 min after exposure could not prevent progressive blood cholinesterase inhibition and therefore would still require additional treatment. A similar decontamination regimen with RSDL at 90 min showed that it still might effectively increase the time window of opportunity for treatment. In conclusion, the delay in absorption presents a window of opportunity for decontamination and treatment. The continuous release of VX from the skin presents a significant challenge for efficacious therapy, which should ideally consist of thorough decontamination and continuous treatment. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Relative toxicity of the pyrolysis products from some thermoplastic and thermoset polymers

NASA Technical Reports Server (NTRS)

Kourtides, D. A.; Gilwee, W. J., Jr.; Hilado, C. J.

1978-01-01

Relative toxicity data on the pyrolysis products of a variety of thermoplastic and thermoset polymers are presented. The data are presented in terms of time to incapacitation and time to death with a fixed sample weight of 1.0 g, and in terms of the apparent lethal concentration required to produce 50 percent mortality within a fixed exposure period of 30 min.

SMC Standard: Evaluation and Test Requirements for Liquid Rocket Engines

DTIC Science & Technology

2017-07-26

Run -Time Trends .................................................................................................... 53 7.2.4 Steady State Analytical...Administration, 2008. 22. M. Singh, J. Vargo, D. Schiffer and J. Dello, “Safe Diagram – A Design and Reliability Tool for Turbine Blading ,” Dresser-Rand...allowed starts and run ‐time including ground acceptance testing, on‐pad firings/aborts, and flight exposure. Part: A single piece (or two or more

Can Lessons from Public Health Disease Surveillance Be Applied to Environmental Public Health Tracking?

PubMed Central

Ritz, Beate; Tager, Ira; Balmes, John

2005-01-01

Disease surveillance has a century-long tradition in public health, and environmental data have been collected at a national level by the U.S. Environmental Protection Agency for several decades. Recently, the Centers for Disease Control and Prevention announced an initiative to develop a national environmental public health tracking (EPHT) network with “linkage” of existing environmental and chronic disease data as a central goal. On the basis of experience with long-established disease surveillance systems, in this article we suggest how a system capable of linking routinely collected disease and exposure data should be developed, but caution that formal linkage of data is not the only approach required for an effective EPHT program. The primary operational goal of EPHT has to be the “treatment” of the environment to prevent and/or reduce exposures and minimize population risk for developing chronic diseases. Chronic, multifactorial diseases do not lend themselves to data-driven evaluations of intervention strategies, time trends, exposure patterns, or identification of at-risk populations based only on routinely collected surveillance data. Thus, EPHT should be synonymous with a dynamic process requiring regular system updates to a) incorporate new technologies to improve population-level exposure and disease assessment, b) allow public dissemination of new data that become available, c) allow the policy community to address new and emerging exposures and disease “threads,” and d) evaluate the effectiveness of EPHT over some appropriate time interval. It will be necessary to weigh the benefits of surveillance against its costs, but the major challenge will be to maintain support for this important new system. PMID:15743709

Army medical laboratory telemedicine: role of mass spectrometry in telediagnosis for chemical and biological defense.

PubMed

Smith, J R; Shih, M L; Price, E O; Platoff, G E; Schlager, J J

2001-12-01

An army medical field laboratory presently has the capability of performing standard protocols developed at the US Army Medical Research Institute of Chemical Defense for verification of nerve agent or sulfur mustard exposure. The protocols analyze hydrolysis products of chemical warfare agents using gas chromatography/mass spectrometry. Additionally, chemical warfare agents can produce alkylated or phosphorylated proteins following human exposure that have long biological half-lives and can be used as diagnostic biomarkers of chemical agent exposure. An analytical technique known as matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF/MS) currently is being examined for its potential to analyze these biomarkers. The technique is capable of detecting large biomolecules and modifications made to them. Its fast analysis time makes MALDI-TOF/MS technology suitable for screening casualties from chemical or biological attacks. Basic operation requires minimal training and the instrument has the potential to become field-portable. The limitation of the technique is that the generated data may require considerable expertise from knowledgeable personnel for consultation to ensure correct interpretation. The interaction between research scientists and field personnel in the acquisition of data and its interpretation via advanced digital telecommunication technologies can enhance rapid diagnosis and subsequently improve patient care in remote areas. Copyright 2001 John Wiley & Sons, Ltd.

Device for timing and power level setting for microwave applications

NASA Astrophysics Data System (ADS)

Ursu, M.-P.; Buidoş, T.

2016-08-01

Nowadays, the microwaves are widely used for various technological processes. The microwaves are emitted by magnetrons, which have strict requirements concerning power supplies for anode and filament cathodes, intensity of magnetic field, cooling and electromagnetic shielding. The magnetrons do not tolerate any alteration of their required voltages, currents and magnetic fields, which means that their output microwave power is fixed, so the only way to alter the power level is to use time-division, by turning the magnetron on and off by repetitive time patterns. In order to attain accurate and reproducible results, as well as correct and safe operation of the microwave device, all these requirements must be fulfilled. Safe, correct and reproducible operation of the microwave appliance can be achieved by means of a specially built electronic device, which ensures accurate and reproducible exposure times, interlocking of the commands and automatic switch off when abnormal operating conditions occur. This driving device, designed and realized during the completion of Mr.Ursu's doctoral thesis, consists of a quartz time-base, several programmable frequency and duration dividers, LED displays, sensors and interlocking gates. The active and passive electronic components are placed on custom-made PCB's, designed and made by means of computer-aided applications and machines. The driving commands of the electronic device are delivered to the magnetron power supplies by means of optic zero-passing relays. The inputs of the electronic driving device can sense the status of the microwave appliance. The user is able to enter the total exposure time, the division factor that sets the output power level and, as a novelty, the clock frequency of the time divider.

Solar ultraviolet and the occupational radiant exposure of Queensland school teachers: A comparative study between teaching classifications and behavior patterns.

PubMed

Downs, Nathan J; Harrison, Simone L; Chavez, Daniel R Garzon; Parisi, Alfio V

2016-05-01

Classroom teachers located in Queensland, Australia are exposed to high levels of ambient solar ultraviolet as part of the occupational requirement to provide supervision of children during lunch and break times. We investigated the relationship between periods of outdoor occupational radiant exposure and available ambient solar radiation across different teaching classifications and schools relative to the daily occupational solar ultraviolet radiation (HICNIRP) protection standard of 30J/m(2). Self-reported daily sun exposure habits (n=480) and personal radiant exposures were monitored using calibrated polysulphone dosimeters (n=474) in 57 teaching staff from 6 different schools located in tropical north and southern Queensland. Daily radiant exposure patterns among teaching groups were compared to the ambient UV-Index. Personal sun exposures were stratified among teaching classifications, school location, school ownership (government vs non-government), and type (primary vs secondary). Median daily radiant exposures were 15J/m(2) and 5J/m(2)HICNIRP for schools located in northern and southern Queensland respectively. Of the 474 analyzed dosimeter-days, 23.0% were found to exceed the solar radiation protection standard, with the highest prevalence found among physical education teachers (57.4% dosimeter-days), followed by teacher aides (22.6% dosimeter-days) and classroom teachers (18.1% dosimeter-days). In Queensland, peak outdoor exposure times of teaching staff correspond with periods of extreme UV-Index. The daily occupational HICNIRP radiant exposure standard was exceeded in all schools and in all teaching classifications. Copyright © 2016 Elsevier B.V. All rights reserved.

Atmospheric constituents and surface-level UVB: Implications for a paleoaltimetry proxy and attempts to reconstruct UV exposure during volcanic episodes

NASA Astrophysics Data System (ADS)

Thomas, Brian C.; Goracke, Byron D.; Dalton, Sean M.

2016-11-01

Chemical and morphological features of spores and pollens have been linked to changes in solar ultraviolet radiation (specifically UVB, 280-315 nm) at Earth's surface. Variation in UVB exposure as inferred from these features has been suggested as a proxy for paleoaltitude; such proxies are important in understanding the uplift history of high altitude plateaus, which in turn is important for testing models of the tectonic processes responsible for such uplift. While UVB irradiance does increase with altitude above sea level, a number of other factors affect the irradiance at any given place and time. In this modeling study we use the TUV atmospheric radiative transfer model to investigate dependence of surface-level UVB irradiance and relative biological impact on a number of constituents in Earth's atmosphere that are variable over long and short time periods. We consider changes in O3 column density, and SO2 and sulfate aerosols due to periods of volcanic activity, including that associated with the formation of the Siberian Traps. We find that UVB irradiance may be highly variable under volcanic conditions and variations in several of these atmospheric constituents can easily mimic or overwhelm changes in UVB irradiance due to changes in altitude. On the other hand, we find that relative change with altitude is not very sensitive to different sets of atmospheric conditions. Any paleoaltitude proxy based on UVB exposure requires confidence that the samples under comparison were located at roughly the same latitude, under very similar O3 and SO2 columns, with similar atmospheric aerosol conditions. In general, accurate estimates of the surface-level UVB exposure at any time and location require detailed radiative transfer modeling taking into account a number of atmospheric factors; this result is important for paleoaltitude proxies as well as attempts to reconstruct the UV environment through geologic time and to tie extinctions, such as the end-Permian mass extinction, to UVB irradiance changes.

Occupational noise exposure and regulatory adherence in music venues in the United Kingdom.

PubMed

Barlow, Christopher; Castilla-Sanchez, Francisco

2012-01-01

Noise in most working environments is an unwanted by-product of the process. In most countries, noise exposure for workers has been controlled by legislation for many years. In the music industry the "noise" is actually the "desired" product, and for a long time the UK entertainment industry was exempt from these regulations. From April 2008, however, it became regulated under the Noise at Work Regulations 2005, meaning that employers from orchestras to nightclubs are legally required to adhere to the same requirements (based on ISO 9612:2009) for controlling noise exposure for their staff that have been applied to other industries for many years. A key question is to what degree, 2 years after implementation, these employers are complying with their legal responsibilities to protect the staff from noise? This study assessed four public music venues where live and/or recorded music is regularly played. Thirty staff members in different roles in the venues were monitored using noise dosimetry to determine noise exposure. Questionnaires were used to determine work patterns, attitudes to noise and hearing loss, and levels of training about noise risk. Results showed that the majority of staff (70%) in all venues exceeded the daily noise exposure limit value in their working shift. Use of hearing protection was rare (<30%) and not enforced by most venues. The understanding of the hazard posed by noise was low, and implementation of the noise regulations was haphazard, with staff regularly exceeding regulatory limits. The implication is that the industry is failing to meet regulatory requirements.

Accounting for patient size in the optimization of dose and image quality of pelvis cone beam CT protocols on the Varian OBI system.

PubMed

Wood, Tim J; Moore, Craig S; Horsfield, Carl J; Saunderson, John R; Beavis, Andrew W

2015-01-01

The purpose of this study was to develop size-based radiotherapy kilovoltage cone beam CT (CBCT) protocols for the pelvis. Image noise was measured in an elliptical phantom of varying size for a range of exposure factors. Based on a previously defined "small pelvis" reference patient and CBCT protocol, appropriate exposure factors for small, medium, large and extra-large patients were derived which approximate the image noise behaviour observed on a Philips CT scanner (Philips Medical Systems, Best, Netherlands) with automatic exposure control (AEC). Selection criteria, based on maximum tube current-time product per rotation selected during the radiotherapy treatment planning scan, were derived based on an audit of patient size. It has been demonstrated that 110 kVp yields acceptable image noise for reduced patient dose in pelvic CBCT scans of small, medium and large patients, when compared with manufacturer's default settings (125 kVp). Conversely, extra-large patients require increased exposure factors to give acceptable images. 57% of patients in the local population now receive much lower radiation doses, whereas 13% require higher doses (but now yield acceptable images). The implementation of size-based exposure protocols has significantly reduced radiation dose to the majority of patients with no negative impact on image quality. Increased doses are required on the largest patients to give adequate image quality. The development of size-based CBCT protocols that use the planning CT scan (with AEC) to determine which protocol is appropriate ensures adequate image quality whilst minimizing patient radiation dose.

40 CFR 158.1000 - Applicator exposure-general requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1000 Applicator exposure—general... Occupational Safety and Health Administration (OSHA), provide adequate protection from risk under FIFRA for a particular pesticide use pattern, exposure data may not be required for that use pattern. Applicants should...

40 CFR 158.1000 - Applicator exposure-general requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1000 Applicator exposure—general... Occupational Safety and Health Administration (OSHA), provide adequate protection from risk under FIFRA for a particular pesticide use pattern, exposure data may not be required for that use pattern. Applicants should...

40 CFR 158.1000 - Applicator exposure-general requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1000 Applicator exposure—general... Occupational Safety and Health Administration (OSHA), provide adequate protection from risk under FIFRA for a particular pesticide use pattern, exposure data may not be required for that use pattern. Applicants should...

40 CFR 158.1000 - Applicator exposure-general requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1000 Applicator exposure—general... Occupational Safety and Health Administration (OSHA), provide adequate protection from risk under FIFRA for a particular pesticide use pattern, exposure data may not be required for that use pattern. Applicants should...

40 CFR 158.1000 - Applicator exposure-general requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1000 Applicator exposure—general... Occupational Safety and Health Administration (OSHA), provide adequate protection from risk under FIFRA for a particular pesticide use pattern, exposure data may not be required for that use pattern. Applicants should...

THE NEED FOR SPEED-RAPID METHODOLOGIES TO DETERMINE BATHING BEACH WATER QUALITY

EPA Science Inventory

Current methods for determining fecal contamination of recreational waters rely on the culture of bacterial indicators and require at least 24 hours to determine whether the water is unsafe for use. By the time monitoring results are available, exposures have already occurred. N...

Detection strategies for the first supernovae with JWST

NASA Astrophysics Data System (ADS)

Hartwig, Tilman; Bromm, Volker; Loeb, Abraham

2018-06-01

Pair-instability supernovae (PISNe) are very luminous explosions of massive, low metallicity stars. They can potentially be observed out to high redshifts due to their high explosion energies, thus providing a probe of the Universe prior to reionization. The near-infrared camera, NIRCam, on board the James Webb Space Telescope is ideally suited for detecting their redshifted ultraviolet emission. We calculate the photometric signature of high-redshift PISNe and derive the optimal detection strategy for identifying their prompt emission and possible afterglow. We differentiate between PISNe and other sources that could have a similar photometric signature, such as active galactic nuclei or high-redshift galaxies. We demonstrate that the optimal strategy, which maximizes the visibility time of the PISN lightcurve per invested exposure time, consists of the two wide-band filters F200W and F356W with an exposure time of 600 s. For such exposures, we expect one PISN at z ≲ 7.5 per at least 50,000 different field of view, which can be accomplished with parallel observations and an extensive archival search. The PISN afterglow, caused by nebular emission and reverberation, is very faint and requires unfeasibly long exposure times to be uniquely identified. However, this afterglow would be visible for several hundred years, about two orders of magnitude longer than the prompt emission, rendering PISNe promising targets for future, even more powerful telescopes.

Cerebellar White Matter Abnormalities following Primary Blast Injury in US Military Personnel

PubMed Central

Mac Donald, Christine; Johnson, Ann; Cooper, Dana; Malone, Thomas; Sorrell, James; Shimony, Joshua; Parsons, Matthew; Snyder, Abraham; Raichle, Marcus; Fang, Raymond; Flaherty, Stephen; Russell, Michael; Brody, David L.

2013-01-01

Little is known about the effects of blast exposure on the human brain in the absence of head impact. Clinical reports, experimental animal studies, and computational modeling of blast exposure have suggested effects on the cerebellum and brainstem. In US military personnel with isolated, primary blast-related ‘mild’ traumatic brain injury and no other known insult, we found diffusion tensor MRI abnormalities consistent with cerebellar white matter injury in 3 of 4 subjects. No abnormalities in other brain regions were detected. These findings add to the evidence supporting the hypothesis that primary blast exposure contributes to brain injury in the absence of head impact and that the cerebellum may be particularly vulnerable. However, the clinical effects of these abnormalities cannot be determined with certainty; none of the subjects had ataxia or other detected evidence of cerebellar dysfunction. The details of the blast events themselves cannot be disclosed at this time, thus additional animal and computational modeling will be required to dissect the mechanisms underlying primary blast-related traumatic brain injury. Furthermore, the effects of possible subconcussive impacts and other military-related exposures cannot be determined from the data presented. Thus many aspects of topic will require further investigation. PMID:23409052

With "big data" comes big responsibility: outreach to North Carolina Medicaid patients with 10 or more computed tomography scans in 12 months.

PubMed

Biola, Holly; Best, Randall M; Lahlou, Rita M; Burke, Lauren M; Dewar, Charles; Jackson, Carlos T; Broder, Joshua; Grey, Linda; Semelka, Richard C; Dobson, Allen

2014-01-01

Patients are being exposed to increasing levels of ionizing radiation, much of it from computed tomography (CT) scans. Adults without a cancer diagnosis who received 10 or more CT scans in 2010 were identified from North Carolina Medicaid claims data and were sent a letter in July 2011 informing them of their radiation exposure; those who had undergone 20 or more CT scans in 2010 were also telephoned. The CT scan exposure of these high-exposure patients during the 12 months following these interventions was compared with that of adult Medicaid patients without cancer who had at least 1 CT scan but were not in the intervention population. The average number of CT scans per month for the high-exposure population decreased over time, but most of that reduction occurred 6-9 months before our interventions took place. At about the same time, the number of CT scans per month also decreased in adult Medicaid patients without cancer who had at least 1 CT scan but were not in the intervention population. Our data do not include information about CT scans that may have been performed during times when patients were not covered by Medicaid. Some of our letters may not have been received or understood. Some high-exposure patients were unintentionally excluded from our study because organization of data on Medicaid claims varies by setting of care. Our patient education intervention was not temporally associated with significant decreases in subsequent CT exposure. Effecting behavior change to reduce exposure to ionizing radiation requires more than an educational letter or telephone call.

Calibration and validation of toxicokinetic-toxicodynamic models for three neonicotinoids and some aquatic macroinvertebrates.

PubMed

Focks, Andreas; Belgers, Dick; Boerwinkel, Marie-Claire; Buijse, Laura; Roessink, Ivo; Van den Brink, Paul J

2018-05-01

Exposure patterns in ecotoxicological experiments often do not match the exposure profiles for which a risk assessment needs to be performed. This limitation can be overcome by using toxicokinetic-toxicodynamic (TKTD) models for the prediction of effects under time-variable exposure. For the use of TKTD models in the environmental risk assessment of chemicals, it is required to calibrate and validate the model for specific compound-species combinations. In this study, the survival of macroinvertebrates after exposure to the neonicotinoid insecticide was modelled using TKTD models from the General Unified Threshold models of Survival (GUTS) framework. The models were calibrated on existing survival data from acute or chronic tests under static exposure regime. Validation experiments were performed for two sets of species-compound combinations: one set focussed on multiple species sensitivity to a single compound: imidacloprid, and the other set on the effects of multiple compounds for a single species, i.e., the three neonicotinoid compounds imidacloprid, thiacloprid and thiamethoxam, on the survival of the mayfly Cloeon dipterum. The calibrated models were used to predict survival over time, including uncertainty ranges, for the different time-variable exposure profiles used in the validation experiments. From the comparison between observed and predicted survival, it appeared that the accuracy of the model predictions was acceptable for four of five tested species in the multiple species data set. For compounds such as neonicotinoids, which are known to have the potential to show increased toxicity under prolonged exposure, the calibration and validation of TKTD models for survival needs to be performed ideally by considering calibration data from both acute and chronic tests.

Children's exposure assessment: a review of factors influencing Children's exposure, and the data available to characterize and assess that exposure.

PubMed Central

Cohen Hubal, E A; Sheldon, L S; Burke, J M; McCurdy, T R; Berry, M R; Rigas, M L; Zartarian, V G; Freeman, N C

2000-01-01

We review the factors influencing children's exposure to environmental contaminants and the data available to characterize and assess that exposure. Children's activity pattern data requirements are demonstrated in the context of the algorithms used to estimate exposure by inhalation, dermal contact, and ingestion. Currently, data on children's exposures and activities are insufficient to adequately assess multimedia exposures to environmental contaminants. As a result, regulators use a series of default assumptions and exposure factors when conducting exposure assessments. Data to reduce uncertainty in the assumptions and exposure estimates are needed to ensure chemicals are regulated appropriately to protect children's health. To improve the database, advancement in the following general areas of research is required: identification of appropriate age/developmental benchmarks for categorizing children in exposure assessment; development and improvement of methods for monitoring children's exposures and activities; collection of activity pattern data for children (especially young children) required to assess exposure by all routes; collection of data on concentrations of environmental contaminants, biomarkers, and transfer coefficients that can be used as inputs to aggregate exposure models. PMID:10856019

THE EPA/ORD/NERL'S HUMAN EXPOSURE MEASUREMENTS PROGRAM - CHILDREN'S FOCUS

EPA Science Inventory

The U.S. EPA's National Exposure Research Laboratory (NERL) conducts research in support of the Food Quality Protection Act (FQPA) of 1996. FQPA requires that children's risks to pesticide exposures be considered during the tolerance-setting process. The Act requires exposure...

75 FR 27239 - Revising the Notification Requirements in the Exposure Determination Provisions of the Hexavalent...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... Exposure Determination Provisions of the Hexavalent Chromium Standards AGENCY: Occupational Safety and... employee notification requirements in the exposure determination provisions of the Hexavalent Chromium (Cr... 1910 Exposure determination, General industry employment, Health, Hexavalent chromium (Cr(VI...

Exposure to crystalline silica in abrasive blasting operations where silica and non-silica abrasives are used.

PubMed

Radnoff, Diane L; Kutz, Michelle K

2014-01-01

Exposure to respirable crystalline silica is a hazard common to many industries in Alberta but particularly so in abrasive blasting. Alberta occupational health and safety legislation requires the consideration of silica substitutes when conducting abrasive blasting, where reasonably practicable. In this study, exposure to crystalline silica during abrasive blasting was evaluated when both silica and non-silica products were used. The crystalline silica content of non-silica abrasives was also measured. The facilities evaluated were preparing metal products for the application of coatings, so the substrate should not have had a significant contribution to worker exposure to crystalline silica. The occupational sampling results indicate that two-thirds of the workers assessed were potentially over-exposed to respirable crystalline silica. About one-third of the measurements over the exposure limit were at the work sites using silica substitutes at the time of the assessment. The use of the silica substitute, by itself, did not appear to have a large effect on the mean airborne exposure levels. There are a number of factors that may contribute to over-exposures, including the isolation of the blasting area, housekeeping, and inappropriate use of respiratory protective equipment. However, the non-silica abrasives themselves also contain silica. Bulk analysis results for non-silica abrasives commercially available in Alberta indicate that many contain crystalline silica above the legislated disclosure limit of 0.1% weight of silica per weight of product (w/w) and this information may not be accurately disclosed on the material safety data sheet for the product. The employer may still have to evaluate the potential for exposure to crystalline silica at their work site, even when silica substitutes are used. Limited tests on recycled non-silica abrasive indicated that the silica content had increased. Further study is required to evaluate the impact of product recycling on crystalline silica content for non-silica abrasives. Measurement of blaster exposure was challenging in this study as the blasters evaluated conducted this task intermittently throughout the work shift, frequently removing their blasting helmets. In spite of the challenges in accurately measuring blaster exposure, the measurements were still, for the most part, over the 8-h OEL. Further work is required to develop more effective sampling strategies to evaluate blaster exposure over the full work shift when task-based monitoring is not practical.

Natural and Induced Environment in Low Earth Orbit

NASA Technical Reports Server (NTRS)

Wilson, John W.; Badavi, Francis F.; Kim, Myung-Hee Y.; Clowdsley, Martha S.; Heinbockel, John H.; Cucinotta, Francis A.; Badhwar, Gautam D.; Atwell, William; Huston, Stuart L.

2002-01-01

The long-term exposure of astronauts on the developing International Space Station (ISS) requires an accurate knowledge of the internal exposure environment for human risk assessment and other onboard processes. The natural environment is moderated by the solar wind which varies over the solar cycle. The neutron environment within the Shuttle in low Earth orbit has two sources. A time dependent model for the ambient environment is used to evaluate the natural and induced environment. The induced neutron environment is evaluated using measurements on STS-31 and STS-36 near the 1990 solar maximum.

Advances in biological dosimetry

NASA Astrophysics Data System (ADS)

Ivashkevich, A.; Ohnesorg, T.; Sparbier, C. E.; Elsaleh, H.

2017-01-01

Rapid retrospective biodosimetry methods are essential for the fast triage of persons occupationally or accidentally exposed to ionizing radiation. Identification and detection of a radiation specific molecular ‘footprint’ should provide a sensitive and reliable measurement of radiation exposure. Here we discuss conventional (cytogenetic) methods of detection and assessment of radiation exposure in comparison to emerging approaches such as gene expression signatures and DNA damage markers. Furthermore, we provide an overview of technical and logistic details such as type of sample required, time for sample preparation and analysis, ease of use and potential for a high throughput analysis.

General Factors of the Korean Exposure Factors Handbook

PubMed Central

Kim, So-Yeon; Kim, Sun-Ja; Lee, Kyung-Eun; Cheong, Hae-Kwan; Kim, Eun-Hye; Choi, Kyung-Ho; Kim, Young-Hee

2014-01-01

Risk assessment considers the situations and characteristics of the exposure environment and host. Various physiological variables of the human body reflects the characteristics of the population that can directly influence risk exposure. Therefore, identification of exposure factors based on the Korean population is required for appropriate risk assessment. It is expected that a handbook about general exposure factors will be used by professionals in many fields as well as the risk assessors of the health department. The process of developing the exposure factors handbook for the Korean population will be introduced in this article, with a specific focus on the general exposure factors including life expectancy, body weight, surface area, inhalation rates, amount of water intake, and soil ingestion targeting the Korean population. The researchers used national databases including the Life Table and the 2005 Time Use Survey from the National Statistical Office. The anthropometric study of size in Korea used the resources provided by the Korean Agency for Technology and Standards. In addition, direct measurement and questionnaire surveys of representative samples were performed to calculate the inhalation rate, drinking water intake, and soil ingestion. PMID:24570802

Magnetic field exposure stiffens regenerating plant protoplast cell walls.

PubMed

Haneda, Toshihiko; Fujimura, Yuu; Iino, Masaaki

2006-02-01

Single suspension-cultured plant cells (Catharanthus roseus) and their protoplasts were anchored to a glass plate and exposed to a magnetic field of 302 +/- 8 mT for several hours. Compression forces required to produce constant cell deformation were measured parallel to the magnetic field by means of a cantilever-type force sensor. Exposure of intact cells to the magnetic field did not result in any changes within experimental error, while exposure of regenerating protoplasts significantly increased the measured forces and stiffened regenerating protoplasts. The diameters of intact cells or regenerating protoplasts were not changed after exposure to the magnetic field. Measured forces for regenerating protoplasts with and without exposure to the magnetic field increased linearly with incubation time, with these forces being divided into components based on the elasticity of synthesized cell walls and cytoplasm. Cell wall synthesis was also measured using a cell wall-specific fluorescent dye, and no changes were noted after exposure to the magnetic field. Analysis suggested that exposure to the magnetic field roughly tripled the Young's modulus of the newly synthesized cell wall without any lag.

40 CFR 158.1070 - Post-application exposure data requirements table.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Post-application exposure data... (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1070 Post-application... table to determine the post-application data requirements for a particular pesticide product. Notes that...

40 CFR 158.1070 - Post-application exposure data requirements table.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Post-application exposure data... (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1070 Post-application... table to determine the post-application data requirements for a particular pesticide product. Notes that...

40 CFR 158.1070 - Post-application exposure data requirements table.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Post-application exposure data... (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1070 Post-application... table to determine the post-application data requirements for a particular pesticide product. Notes that...

A study on quantitative analysis of exposure dose caused by patient depending on time and distance in nuclear medicine examination

NASA Astrophysics Data System (ADS)

Kim, H. S.; Cho, J. H.; Shin, S. G.; Dong, K. R.; Chung, W. K.; Chung, J. E.

2013-01-01

This study evaluated possible actions that can help protect against and reduce radiation exposure by measuring the exposure dose for each type of isotope that is used frequently in nuclear medicine before performing numerical analysis of the effective half-life based on the measurement results. From July to August in 2010, the study targeted 10, 6 and 5 people who underwent an 18F-FDG (fludeoxyglucose) positron emission tomography (PET) scan, 99mTc-HDP bone scan, and 201Tl myocardial single-photon emission computed tomography (SPECT) scan, respectively, in the nuclear medicine department. After injecting the required medicine into the subjects, a survey meter was used to measure the dose depending on the distance from the heart and time elapsed. For the 18F-FDG PET scan, the dose decreased by approximately 66% at 90 min compared to that immediately after the injection and by 78% at a distance of 1 m compared to that at 0.3 m. In the 99mTc-HDP bone scan, the dose decreased by approximately 71% in 200 min compared to that immediately after the injection and by approximately 78% at a distance of 1 m compared to that at 0.3 m. In the 201Tl myocardial SPECT scan, the dose decreased by approximately 30% in 250 min compared to that immediately after the injection and by approximately 55% at a distance of 1 m compared to that at 0.3 m. In conclusion, the dose decreases by a large margin depending on the distance and time. In conclusion, this study measured the exposure doses by isotopes, distance from the heart and exposure time, and found that the doses were reduced significantly according the distance and the time.

Vehicle Exposure and Spinal Musculature Fatigue in Military Warfighters: A Meta-Analysis.

PubMed

Kollock, Roger O; Games, Kenneth E; Wilson, Alan E; Sefton, JoEllen M

2016-11-01

 Spinal musculature fatigue from vehicle exposure may place warfighters at risk for spinal injuries and pain. Research on the relationship between vehicle exposure and spinal musculature fatigue is conflicting. A better understanding of the effect of military duty on musculoskeletal function is needed before sports medicine teams can develop injury-prevention programs.  To determine if the literature supports a definite effect of vehicle exposure on spinal musculature fatigue.  We searched the MEDLINE, Military & Government Collection (EBSCO), National Institute for Occupational Safety and Health Technical Information Center, PubMed, and Web of Science databases for articles published between January 1990 and September 2015.  To be included, a study required a clear sampling method, preexposure and postexposure assessments of fatigue, a defined objective measurement of fatigue, a defined exposure time, and a study goal of exposing participants to forces related to vehicle exposure.  Sample size, mean preexposure and postexposure measures of fatigue, vehicle type, and exposure time.  Six studies met the inclusion criteria. We used the Scottish Intercollegiate Guidelines Network algorithm to determine the appropriate tool for quality appraisal of each article. Unweighted random-effects model meta-analyses were conducted, and a natural log response ratio was used as the effect metric. The overall meta-analysis demonstrated that vehicle exposure increased fatigue of the spinal musculature (P = .03; natural log response ratio = -0.22, 95% confidence interval = -0.42, -0.02). Using the spinal region as a moderator, we observed that vehicle ride exposure significantly increased fatigue at the lumbar musculature (P = .02; natural log response ratio = -0.27, 95% confidence interval = -0.50, -0.04) but not at the cervical or thoracic region.  Vehicle exposure increased fatigue at the lumbar region.

Vehicle Exposure and Spinal Musculature Fatigue in Military Warfighters: A Meta-Analysis

PubMed Central

Kollock, Roger O.; Games, Kenneth E.; Wilson, Alan E.; Sefton, JoEllen M.

2016-01-01

Context: Spinal musculature fatigue from vehicle exposure may place warfighters at risk for spinal injuries and pain. Research on the relationship between vehicle exposure and spinal musculature fatigue is conflicting. A better understanding of the effect of military duty on musculoskeletal function is needed before sports medicine teams can develop injury-prevention programs. Objective: To determine if the literature supports a definite effect of vehicle exposure on spinal musculature fatigue. Data Sources: We searched the MEDLINE, Military & Government Collection (EBSCO), National Institute for Occupational Safety and Health Technical Information Center, PubMed, and Web of Science databases for articles published between January 1990 and September 2015. Study Selection: To be included, a study required a clear sampling method, preexposure and postexposure assessments of fatigue, a defined objective measurement of fatigue, a defined exposure time, and a study goal of exposing participants to forces related to vehicle exposure. Data Extraction: Sample size, mean preexposure and postexposure measures of fatigue, vehicle type, and exposure time. Data Synthesis: Six studies met the inclusion criteria. We used the Scottish Intercollegiate Guidelines Network algorithm to determine the appropriate tool for quality appraisal of each article. Unweighted random-effects model meta-analyses were conducted, and a natural log response ratio was used as the effect metric. The overall meta-analysis demonstrated that vehicle exposure increased fatigue of the spinal musculature (P = .03; natural log response ratio = −0.22, 95% confidence interval = −0.42, −0.02). Using the spinal region as a moderator, we observed that vehicle ride exposure significantly increased fatigue at the lumbar musculature (P = .02; natural log response ratio = −0.27, 95% confidence interval = −0.50, −0.04) but not at the cervical or thoracic region. Conclusions: Vehicle exposure increased fatigue at the lumbar region. PMID:28068167

Keratinocyte Motility Is Affected by UVA Radiation-A Comparison between Normal and Dysplastic Cells.

PubMed

Niculiţe, Cristina M; Nechifor, Marina T; Urs, Andreea O; Olariu, Laura; Ceafalan, Laura C; Leabu, Mircea

2018-06-07

UVA radiation induces multiple and complex changes in the skin, affecting epidermal cell behavior. This study reports the effects of UVA exposure on normal (HaCaT) and dysplastic (DOK) keratinocytes. The adherence, spreading and proliferation were investigated by time-lapse measurement of cell layer impedance on different matrix proteins. Prior to UVA exposure, the time required for adherence and spreading did not differ significantly for HaCaT and DOK cells, while spreading areas were larger for HaCaT cells. Under UVA exposure, HaCaT and DOK cells behavior differed in terms of movement and proliferation. The cells' ability to cover the denuded surface and individual cell trajectories were recorded by time-lapse videomicroscopy, during wound healing experiments. Dysplastic keratinocytes showed more sensitivity to UVA, exhibiting transient deficiencies in directionality of movement and a delay in re-coating the denuded area. The actin cytoskeleton displayed a cortical organization immediately after irradiation, in both cell lines, similar to mock-irradiated cells. Post-irradiation, DOK cells displayed a better organization of stress fibers, persistent filopodia, and new, stronger focal contacts. In conclusion, after UVA exposure HaCaT and DOK cells showed a different behavior in terms of adherence, spreading, motility, proliferation, and actin cytoskeleton dynamics, with the dyplastic keratinocytes being more sensitive.

[Solar exposure time for sunburn in Mexican population].

PubMed

Castanedo Cázares, Juan Pablo; Torres Álvarez, Bertha; Sobrevilla Ondarza, Salvador; Ehnis Pérez, Adriana; Gordillo Moscoso, Antonio

2012-01-01

THe minimal erythemal dose (MED) quantifies an individual's sensitivity to UV radiation (UVR). To estimate it in our population and establish the time of exposure inducing it during daily activities would allow us to calculate risk intervals. From 2005-2012, the UV solar radiation was measured with terrestrial radiometry and compared to public UV index (UVI). We determined the MED in 90 individuals with the prevalent phototypes in Mexico (III, IV, V), and estimated the time needed for the development of sunburn. The average MED for phototype III was 39 (IC 95%: 35-42) mJ/cm2, for IV 48 (IC 95%:42-53) mJ/cm2, and for V was 84 (IC 95%:75-92) mJ/cm2 (ANOVA, p ≤ 0.001). Approximately, 80% of the daily UVR was accumulated between 10:00-16:00 h, and 77% of the annual UV dose is received between March-October. The public UVI had a high correlation with the one quantified at terrestrial level (r = 0.89; p ≤ 0.001). Mexico receives continuously high levels of UVR. Phototype III will present sunburn after 22-33 min in a summer day, while phototype V will require over one hour of exposure. This last group is at risk of chronic exposure without considering consequences.

THE US EPA'S DERMAL EXPOSURE RESEARCH PROGRAM IN SUPPORT OF THE FOOD QUALITY PROTECTION ACT

EPA Science Inventory

The Food Quality Protection Act of 1996 (FQPA) requires that children's risks to pesticide exposures be considered during the tolerance-setting process. FQPA requires exposure assessments to be conducted for all pesticides sources, not just food sources. It also requires tha...

Data-driven nonlinear optimisation of a simple air pollution dispersion model generating high resolution spatiotemporal exposure

NASA Astrophysics Data System (ADS)

Yuval; Bekhor, Shlomo; Broday, David M.

2013-11-01

Spatially detailed estimation of exposure to air pollutants in the urban environment is needed for many air pollution epidemiological studies. To benefit studies of acute effects of air pollution such exposure maps are required at high temporal resolution. This study introduces nonlinear optimisation framework that produces high resolution spatiotemporal exposure maps. An extensive traffic model output, serving as proxy for traffic emissions, is fitted via a nonlinear model embodying basic dispersion properties, to high temporal resolution routine observations of traffic-related air pollutant. An optimisation problem is formulated and solved at each time point to recover the unknown model parameters. These parameters are then used to produce a detailed concentration map of the pollutant for the whole area covered by the traffic model. Repeating the process for multiple time points results in the spatiotemporal concentration field. The exposure at any location and for any span of time can then be computed by temporal integration of the concentration time series at selected receptor locations for the durations of desired periods. The methodology is demonstrated for NO2 exposure using the output of a traffic model for the greater Tel Aviv area, Israel, and the half-hourly monitoring and meteorological data from the local air quality network. A leave-one-out cross-validation resulted in simulated half-hourly concentrations that are almost unbiased compared to the observations, with a mean error (ME) of 5.2 ppb, normalised mean error (NME) of 32%, 78% of the simulated values are within a factor of two (FAC2) of the observations, and the coefficient of determination (R2) is 0.6. The whole study period integrated exposure estimations are also unbiased compared with their corresponding observations, with ME of 2.5 ppb, NME of 18%, FAC2 of 100% and R2 that equals 0.62.

Biochemical and Medical Information for Marine Hazardous Substances. Volume 3. Marine Hazardous Chemical Worker.

DTIC Science & Technology

1985-12-01

and respiratory tract; CNS depression .. at high concentrations. chronic: Dermatitis BIOL. FATE/METABOLITES: N/A . 1 MEDICAL MONITORIG : Medical exam...accidental: N/A chronic: Silicosis, pulmonary fibrosis, normally years of exposure are required, but in very heavy dust clouds disease developes in less time

9 CFR 93.209 - Quarantine requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., other than eggs for hatching, imported, except as provided in § 93.216 of this part, shall be... from exposure to such diseases. (b) Poultry eggs for hatching imported, except from regions designated..., shall be quarantined from time of arrival at the port of entry until hatched and the poultry from such...

9 CFR 93.209 - Quarantine requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., other than eggs for hatching, imported, except as provided in § 93.216 of this part, shall be... from exposure to such diseases. (b) Poultry eggs for hatching imported, except from regions designated... influenza, shall be quarantined from time of arrival at the port of entry until hatched and the poultry from...

9 CFR 93.209 - Quarantine requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., other than eggs for hatching, imported, except as provided in § 93.216 of this part, shall be... from exposure to such diseases. (b) Poultry eggs for hatching imported, except from regions designated... influenza, shall be quarantined from time of arrival at the port of entry until hatched and the poultry from...

Technique and interpretation in tree seed radiography

Treesearch

Howard B. Kriebel

1966-01-01

The study of internal seed structure by radiography requires techniques which will give good definition. To establish the best procedures, we conducted a series of experiments in which we manipulated the principal controllable variables affecting the quality of X-radiographs: namely, focus-to-film distance, film speed (grain), exposure time, kilovoltage, and...

40 CFR 26.1101 - To what does this subpart apply?

Code of Federal Regulations, 2012 CFR

2012-07-01

... HUMAN SUBJECTS Basic Ethical Requirements for Third-Party Human Research for Pesticides Involving... initiated after April 7, 2006 involving intentional exposure of a human subject if, at any time prior to... additional protections for human subjects. (e) This subpart does not affect any State or local laws or...

40 CFR 26.1101 - To what does this subpart apply?

Code of Federal Regulations, 2011 CFR

2011-07-01

... HUMAN SUBJECTS Basic Ethical Requirements for Third-Party Human Research for Pesticides Involving... initiated after April 7, 2006 involving intentional exposure of a human subject if, at any time prior to... additional protections for human subjects. (e) This subpart does not affect any State or local laws or...

21 CFR 1020.31 - Radiographic equipment.

Code of Federal Regulations, 2010 CFR

2010-04-01

... time, but means may be provided to permit completion of any single exposure of the series in process.... Radiation therapy simulation systems are exempt from this requirement. (iii) The edge of the light field at..., except when the spot-film device is provided for use with a radiation therapy simulation system: (1...

Correlation of fermentation characteristics with intake and digestibility of alfalfa silage in gestating ewes

USDA-ARS?s Scientific Manuscript database

Baled silage production provides benefits to farmers because it reduces leaf losses, and requires a shorter wilting time, thereby limiting risks of exposure to rain compared with making hay. Our objective was to investigate the correlation of alfalfa silage fermentation parameters with intake and di...

RAPID MEASUREMENT OF BACTERIAL FECAL INDICATORS IN SURFACE WATERS BY QUANTITATIVE POLYMERASE CHAIN REACTION (QPCR) ANALYSIS

EPA Science Inventory

Current methods for determining fecal contamination of recreational waters rely on the culture of bacterial indicators and require at least 24 hours to determine whether the water is unsafe for use. By the time monitoring results are available, exposures have already occurred. N...

Sharing the knowledge gained from occupational cohort studies: a call for action.

PubMed

Behrens, Thomas; Mester, Birte; Fritschi, Lin

2012-06-01

An immense body of knowledge has been created by establishing various job-exposure matrices (JEMs) to assess occupational exposures in community- and industry-based cohort studies. These JEMs could be made available to occupational epidemiologists using knowledge-sharing technologies, thereby saving considerable amounts of time and money for researchers investigating occupation-related research questions. In this paper, the authors give an example of how a detailed JEM can be easily transformed into a job-specific module (JSM) for use in community-based studies. OccIDEAS is operationalised as a web-based software, combining the use of JSMs with an individual expert exposure assessment to assess occupational exposures in various industries according to a set of predefined rules. The authors used a JEM focusing on endocrine-disrupting chemicals from a German study on testicular cancer in the automobile industry to create a JSM in OccIDEAS. The JEM was easily translated into OccIDEAS requiring about 50 h of work by an epidemiologist familiar with the German JEM to learn about the OccIDEAS structure, establish the required set of exposure rules and to translate the JEM into OccIDEAS. Language did not represent an obstacle for translation either. To make the data available in an international context, an interpreter had to translate the German tasks and exposures after they were coded into OccIDEAS. JEMs which are constructed based on identifying tasks that determine exposure can be easily transformed into a JSM. Occupational epidemiologists are invited to contribute to the international scope of OccIDEAS by providing their previously established JEMs to make existing data on occupational exposures widely available to the epidemiological community.

Pregnant women models analyzed for RF exposure and temperature increase in 3T RF shimmed birdcages.

PubMed

Murbach, Manuel; Neufeld, Esra; Samaras, Theodoros; Córcoles, Juan; Robb, Fraser J; Kainz, Wolfgang; Kuster, Niels

2017-05-01

MRI is increasingly used to scan pregnant patients. We investigated the effect of 3 Tesla (T) two-port radiofrequency (RF) shimming in anatomical pregnant women models. RF shimming improves B 1 + uniformity, but may at the same time significantly alter the induced current distribution and result in large changes in both the level and location of the absorbed RF energy. In this study, we evaluated the electrothermal exposure of pregnant women in the third, seventh, and ninth month of gestation at various imaging landmarks in RF body coils, including modes with RF shimming. Although RF shimmed configurations may lower the local RF exposure for the mother, they can increase the thermal load on the fetus. In worst-case configurations, whole-body exposure and local peak temperatures-up to 40.8°C-are equal in fetus and mother. Two-port RF shimming can significantly increase the fetal exposure in pregnant women, requiring further research to derive a very robust safety management. For the time being, restriction to the CP mode, which reduces fetal SAR exposure compared with linear-horizontal polarization modes, may be advisable. Results from this study do not support scanning pregnant patients above the normal operating mode. Magn Reson Med 77:2048-2056, 2017. © 2016 International Society for Magnetic Resonance in Medicine. © 2016 International Society for Magnetic Resonance in Medicine.

Effect of bright light at night on core temperature, subjective alertness and performance as a function of exposure time.

PubMed

Foret, J; Daurat, A; Tirilly, G

1998-01-01

This simulated night shift study measured the effects of moderate bright light (a 4-hour pulse starting at 2000 or 0400) during the exposure night and subsequent night (dim light). Eight young males remained confined with little physical activity to a laboratory in groups of 4. After a night of reference, they were active for 24 hours; then after a morning recovery sleep, they were active again for 16 hours. Continuously measured rectal temperature proved to be immediately sensitive to 4 hours of bright light, particularly when given at the end of the night. Self-assessed alertness and also performance on a task with a high requirement for short-term memory were improved by the exposure to bright light. During the subsequent night the subjects were exposed only to dim light. Core temperature, subjective alertness and performance continued to show a time course depending on the preceding bright light exposure. Probably because evening exposure to bright light and morning sleep both had a phase-delaying effect, the effects on the circadian pacemaker were more pronounced. Thus, for practical applications in long night shifts, bright light can be considered to improve mood and alertness immediately but the possibility of modifying the circadian "clock" during subsequent nights should be taken into consideration, in particular after exposure to bright light in the evening.

Evaluation of new aquatic toxicity test methods for oil dispersants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pace, C.B.; Clark, J.R.; Bragin, G.E.

1994-12-31

Current aquatic toxicity test methods used for dispersant registration do not address real world exposure scenarios. Current test methods require 48 or 96 hour constant exposure conditions. In contrast, environmentally realistic exposures can be described as a pulse in which the initial concentration declines over time. Recent research using a specially designed testing apparatus (the California system) has demonstrated that exposure to Corexit 9527{reg_sign} under pulsed exposure conditions may be 3 to 22 times less toxic compared to continuous exposure scenarios. The objectives of this study were to compare results of toxicity tests using the California test system to resultsmore » from standardized tests, evaluate sensitivity of regional (Holmesimysis cast and Atherinops affinis) vs. standard test species (Mysidopsis bahia and Menidia beryllina) and determine if tests using the California test system and method are reproducible. All tests were conducted using Corexit 9527{reg_sign} as the test material. Standard toxicity tests conducted with M. bahia and H. cast resulted in LC50s similar to those from tests using the California apparatus. LC50s from tests conducted in the authors` laboratory with the California system and standard test species were within a factor of 2 to 6 of data previously reported for west coast species. Results of tests conducted with H. cast in the laboratory compared favorably to data reported by Singer et al. 1991.« less

On negative outcome control of unobserved confounding as a generalization of difference-in-differences

PubMed Central

Sofer, Tamar; Richardson, David B.; Colicino, Elena; Schwartz, Joel; Tchetgen Tchetgen, Eric J.

2016-01-01

The difference-in-differences (DID) approach is a well known strategy for estimating the effect of an exposure in the presence of unobserved confounding. The approach is most commonly used when pre-and post-exposure outcome measurements are available, and one can assume that the association of the unobserved confounder with the outcome is equal in the two exposure groups, and constant over time. Then, one recovers the treatment effect by regressing the change in outcome over time on the exposure. In this paper, we interpret the difference-in-differences as a negative outcome control (NOC) approach. We show that the pre-exposure outcome is a negative control outcome, as it cannot be influenced by the subsequent exposure, and it is affected by both observed and unobserved confounders of the exposure-outcome association of interest. The relation between DID and NOC provides simple conditions under which negative control outcomes can be used to detect and correct for confounding bias. However, for general negative control outcomes, the DID-like assumption may be overly restrictive and rarely credible, because it requires that both the outcome of interest and the control outcome are measured on the same scale. Thus, we present a scale-invariant generalization of the DID that may be used in broader NOC contexts. The proposed approach is demonstrated in simulations and on a Normative Aging Study data set, in which Body Mass Index is used for NOC of the relationship between air pollution and inflammatory outcomes. PMID:28239233

Lower Limits on Aperture Size for an ExoEarth Detecting Coronagraphic Mission

NASA Technical Reports Server (NTRS)

Stark, Christopher C.; Roberge, Aki; Mandell, Avi; Clampin, Mark; Domagal-Goldman, Shawn D.; McElwain, Michael W.; Stapelfeldt, Karl R.

2015-01-01

The yield of Earth-like planets will likely be a primary science metric for future space-based missions that will drive telescope aperture size. Maximizing the exoEarth candidate yield is therefore critical to minimizing the required aperture. Here we describe a method for exoEarth candidate yield maximization that simultaneously optimizes, for the first time, the targets chosen for observation, the number of visits to each target, the delay time between visits, and the exposure time of every observation. This code calculates both the detection time and multiwavelength spectral characterization time required for planets. We also refine the astrophysical assumptions used as inputs to these calculations, relying on published estimates of planetary occurrence rates as well as theoretical and observational constraints on terrestrial planet sizes and classical habitable zones. Given these astrophysical assumptions, optimistic telescope and instrument assumptions, and our new completeness code that produces the highest yields to date, we suggest lower limits on the aperture size required to detect and characterize a statistically motivated sample of exoEarths.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee Cadwallader

The safety of personnel at existing fusion experiments is an important concern that requires diligence. Looking to the future, fusion experiments will continue to increase in power and operating time until steady state power plants are achieved; this causes increased concern for personnel safety. This paper addresses four important aspects of personnel safety in the present and extrapolates these aspects to future power plants. The four aspects are personnel exposure to ionizing radiation, chemicals, magnetic fields, and radiofrequency (RF) energy. Ionizing radiation safety is treated well for present and near-term experiments by the use of proven techniques from other nuclearmore » endeavors. There is documentation that suggests decreasing the annual ionizing radiation exposure limits that have remained constant for several decades. Many chemicals are used in fusion research, for parts cleaning, as use as coolants, cooling water cleanliness control, lubrication, and other needs. In present fusion experiments, a typical chemical laboratory safety program, such as those instituted in most industrialized countries, is effective in protecting personnel from chemical exposures. As fusion facilities grow in complexity, the chemical safety program must transition from a laboratory scale to an industrial scale program that addresses chemical use in larger quantity. It is also noted that allowable chemical exposure concentrations for workers have decreased over time and, in some cases, now pose more stringent exposure limits than those for ionizing radiation. Allowable chemical exposure concentrations have been the fastest changing occupational exposure values in the last thirty years. The trend of more restrictive chemical exposure regulations is expected to continue into the future. Other issues of safety importance are magnetic field exposure and RF energy exposure. Magnetic field exposure limits are consensus values adopted as best practices for worker safety; a typical exposure value is ~1000 times the Earth’s magnetic field, but the Earth’s field is a very low value. Allowable static magnetic field exposure limits have remained constant over the recent past and would appear to remain constant for the foreseeable future. Some existing fusion experiments have suffered from RF energy leakage from waveguides, the typical practice to protect personnel is establishing personnel exclusion areas when systems are operating. RF exposure limits have remained fairly constant for overall body exposures, but have become more specific in the exposure frequency values. This paper describes the occupational limits for those types of exposure, how these exposures are managed, and also discusses the likelihood of more restrictive regulations being promulgated that will affect the design of future fusion power plants and safety of their personnel.« less

The exposome concept: a challenge and a potential driver for environmental health research.

PubMed

Siroux, Valérie; Agier, Lydiane; Slama, Rémy

2016-06-01

The exposome concept was defined in 2005 as encompassing all environmental exposures from conception onwards, as a new strategy to evidence environmental disease risk factors. Although very appealing, the exposome concept is challenging in many respects. In terms of assessment, several hundreds of time-varying exposures need to be considered, but increasing the number of exposures assessed should not be done at the cost of increased exposure misclassification. Accurately assessing the exposome currently requires numerous measurements, which rely on different technologies; resulting in an expensive set of protocols. In the future, high-throughput 'omics technologies may be a promising technique to integrate a wide range of exposures from a small numbers of biological matrices. Assessing the association between many exposures and health raises statistical challenges. Due to the correlation structure of the exposome, existing statistical methods cannot fully and efficiently untangle the exposures truly affecting the health outcome from correlated exposures. Other statistical challenges relate to accounting for exposure misclassification or identifying synergistic effects between exposures. On-going exposome projects are trying to overcome technical and statistical challenges. From a public health perspective, a better understanding of the environmental risk factors should open the way to improved prevention strategies. Copyright ©ERS 2016.

ESTIMATION OF INTERNAL EXPOSURE TO URANIUM WITH UNCERTAINTY FROM URINALYSIS DATA USING THE InDEP COMPUTER CODE

PubMed Central

Anderson, Jeri L.; Apostoaei, A. Iulian; Thomas, Brian A.

2015-01-01

The National Institute for Occupational Safety and Health (NIOSH) is currently studying mortality in a cohort of 6409 workers at a former uranium processing facility. As part of this study, over 220 000 urine samples were used to reconstruct organ doses due to internal exposure to uranium. Most of the available computational programs designed for analysis of bioassay data handle a single case at a time, and thus require a significant outlay of time and resources for the exposure assessment of a large cohort. NIOSH is currently supporting the development of a computer program, InDEP (Internal Dose Evaluation Program), to facilitate internal radiation exposure assessment as part of epidemiological studies of both uranium- and plutonium-exposed cohorts. A novel feature of InDEP is its batch processing capability which allows for the evaluation of multiple study subjects simultaneously. InDEP analyses bioassay data and derives intakes and organ doses with uncertainty estimates using least-squares regression techniques or using the Bayes’ Theorem as applied to internal dosimetry (Bayesian method). This paper describes the application of the current version of InDEP to formulate assumptions about the characteristics of exposure at the study facility that were used in a detailed retrospective intake and organ dose assessment of the cohort. PMID:22683620

Occupational UVR skin protection by make-up.

PubMed

Bonner, R; Khazova, M; O'Hagan, J B; Squire, H

2012-03-01

New legislation has been introduced in the Member States of the European Union, covering worker exposure to artificial optical radiation. Use of make-up could reduce the ultraviolet hazard level and provide additional protection for skin against UV radiation (UVR). This is particularly important in entertainment and filming where intentional exposure of the actors and presenters to the very intense light sources may be required for extended periods of time. This document presents the assessment of UVR protection of make-up used in entertainment and demonstrates that the protection level varies considerably for different luminaires and application techniques. An important practical implication of this finding is that make-up alone cannot be considered as a reliable protection measure against skin exposure to actinic UV.

[Radiation exposure of radiologists during angiography: dose measurements outside the lead apron].

PubMed

Fischer, H; Przetak, C; Teubert, G; Ewen, K; Mödder, U

1995-02-01

The aim of this study was to provide practical information to angiographers concerning radiation exposure to body parts not covered by lead aprons. Individual doses to the neck and hands of radiologists measured in micro-Sieverts were obtained during the course of 80 angiographies of various types. The number of diagnostic and interventional procedures, which might lead to exceeding permissible doses, have been calculated. Possibilities of estimating doses during angiography by means of parameters such as screening times were examined statistically. Especially with regard to the hands, estimations of the doses are insufficient (correlation r = 0.21). Radiologists who undertake much angiographic and particularly interventional work may reach exposure levels requiring protective measures in addition to lead aprons.

Blood manganese as an exposure biomarker: State of the evidence

PubMed Central

Baker, Marissa G.; Simpson, Christopher D.; Stover, Bert; Sheppard, Lianne; Checkoway, Harvey; Racette, Brad A.; Seixas, Noah S.

2014-01-01

Despite evidence of adverse health effects resulting from exposure to manganese (Mn), biomarkers of exposure are poorly understood. To enhance understanding, mean blood Mn (MnB) and mean air Mn (MnA) were extracted from 63 exposure groups in 24 published papers, and the relationship was modeled using segmented regression. On a log/log scale, a positive association between MnA and MnB was observed among studies reporting MnA concentrations above about 10 μg/m3, although interpretation is limited by largely cross-sectional data, study design variability, and differences in exposure monitoring methods. Based on the results of the segmented regression, we hypothesize that below the concentration of about 10 μg/m3, Mn in the body is dominated by dietary Mn, and additional inhaled Mn only causes negligible changes in Mn levels unless the inhaled amount is substantial. However, stronger study designs are required to account for temporal characteristics of the MnA to MnB relationships which reflect the underlying physiology and toxicokinetics of Mn uptake and distribution. Thus, we present an inception cohort study design we have conducted among apprentice welders, and the analytical strengths this study design offers. To determine if blood could be a useful biomarker for Mn to be utilized by industrial hygienists in general industry requires additional time-specific analyses, which our inception cohort study design will allow. PMID:24579750

The Frequency of Unhealthy Food Advertising on Mainland Chinese Television (TV) and Children and Adolescents' Risk of Exposure to Them.

PubMed

Zhou, Zhenghua; Diao, Qinqin; Shao, Nan; Liang, Youke; Lin, Li; Lei, Yan; Zheng, Lingmei

2015-01-01

To conduct an analysis of the frequency of unhealthy food advertising on mainland Chinese television (TV) and children and adolescents' risk of exposure to them. The frequencies of all types of advertisements (ads) on forty TV channels in mainland China, the exact ad broadcast times, and the name and brand of all snacks and western fast foods advertised were recorded from 0800 hours to 2400 hours on both a weekday and a weekend day in a week. The difference in the frequencies of the diverse types of ads over eight time intervals (each time interval was 2 hours) were compared, and the trends in ad frequencies during the time intervals were described. The TV channels broadcast 155 (91-183) (expressed as median [P25-P75]) food ads, 87 (38-123) snack ads, 49 (11-85) beverage ads, and 58 (25-76) ads of snacks suitable for limited consumption (SSLCs) in a day. The proportion of snack ads among food ads (SPF%) was 55.5% (40.3%-71.0%), and the proportion of SSLC ads among snack ads (LPS%) was 67.4% (55.4%-79.3%). The ad frequencies for food, snacks, SSLCs, and beverages demonstrated significant differences among the eight time intervals (all P=0.000). TV channels broadcast the most frequent ads for food, snacks, SSLCs, and beverages during the time interval from 2000 hours to 2200 hours among the eight time intervals. Chinese children and adolescents may be at a high risk of exposure to unhealthy food advertising on TV. Reducing the exposure risk strongly requires multisectoral cooperation.

The Frequency of Unhealthy Food Advertising on Mainland Chinese Television (TV) and Children and Adolescents’ Risk of Exposure to Them

PubMed Central

Zhou, Zhenghua; Diao, Qinqin; Shao, Nan; Liang, Youke; Lin, Li; Lei, Yan; Zheng, Lingmei

2015-01-01

Objective To conduct an analysis of the frequency of unhealthy food advertising on mainland Chinese television (TV) and children and adolescents’ risk of exposure to them. Methods The frequencies of all types of advertisements (ads) on forty TV channels in mainland China, the exact ad broadcast times, and the name and brand of all snacks and western fast foods advertised were recorded from 0800 hours to 2400 hours on both a weekday and a weekend day in a week. The difference in the frequencies of the diverse types of ads over eight time intervals (each time interval was 2 hours) were compared, and the trends in ad frequencies during the time intervals were described. Results The TV channels broadcast 155 (91-183) (expressed as median [P 25-P 75]) food ads, 87 (38-123) snack ads, 49 (11-85) beverage ads, and 58 (25-76) ads of snacks suitable for limited consumption (SSLCs) in a day. The proportion of snack ads among food ads (SPF%) was 55.5% (40.3%-71.0%), and the proportion of SSLC ads among snack ads (LPS%) was 67.4% (55.4%-79.3%). The ad frequencies for food, snacks, SSLCs, and beverages demonstrated significant differences among the eight time intervals (all P=0.000). TV channels broadcast the most frequent ads for food, snacks, SSLCs, and beverages during the time interval from 2000 hours to 2200 hours among the eight time intervals. Conclusions Chinese children and adolescents may be at a high risk of exposure to unhealthy food advertising on TV. Reducing the exposure risk strongly requires multisectoral cooperation. PMID:26133984

Toxicological safeguards in the manned Mars missions

NASA Technical Reports Server (NTRS)

Coleman, Martin E.

1986-01-01

Safeguards against toxic chemical exposures during manned Mars missions (MMMs) will be important for the maintenance of crew health and the accomplishment of mission objectives. Potential sources include offgassing, thermodegradation or combustion of materials, metabolic products of crew members, and escape of chemical from containment. Spacecraft maximum allowable concentration (SMAC) limits will have to be established for potential contaminants during the MMMs. The following factors will be used in establishing these limits: duration of mission, simultaneous exposure to other contaminants, deconditioning of crew members after long periods of reduced gravity, and simultaneous exposure to ionizing radiation. Atmospheric contaminant levels in all compartments of the transit spacecraft and Manned Mars Station (MMS) will be monitored at frequent intervals with a real time analyzer. This analyzer will be highly automated, requiring minimal crew time and expertise. The atmospheric analyzer will find other usages during the MMMs such as analyzing Martian atmospheres and soils, exhaled breath and body fluids of crew members, and reaction products in chemical processing facilities.

Use of land surface remotely sensed satellite and airborne data for environmental exposure assessment in cancer research

USGS Publications Warehouse

Maxwell, S.K.; Meliker, J.R.; Goovaerts, P.

2010-01-01

In recent years, geographic information systems (GIS) have increasingly been used for reconstructing individual-level exposures to environmental contaminants in epidemiological research. Remotely sensed data can be useful in creating space-time models of environmental measures. The primary advantage of using remotely sensed data is that it allows for study at the local scale (e.g., residential level) without requiring expensive, time-consuming monitoring campaigns. The purpose of our study was to identify how land surface remotely sensed data are currently being used to study the relationship between cancer and environmental contaminants, focusing primarily on agricultural chemical exposure assessment applications. We present the results of a comprehensive literature review of epidemiological research where remotely sensed imagery or land cover maps derived from remotely sensed imagery were applied. We also discuss the strengths and limitations of the most commonly used imagery data (aerial photographs and Landsat satellite imagery) and land cover maps.

The influence of street layouts and viaduct settings on daily carbon monoxide exposure and intake fraction in idealized urban canyons.

PubMed

Hang, Jian; Luo, Zhiwen; Wang, Xuemei; He, Lejian; Wang, Baomin; Zhu, Wei

2017-01-01

Environmental concerns have been raised on the adverse health effects of vehicle emissions in micro-scale traffic-crowded street canyons, especially for pedestrians and residents living in near-road buildings. Viaduct design is sometimes used to improve transportation efficiency but possibly affects urban airflow and the resultant exposure risk, which have been rarely investigated so far. The personal intake fraction (P_IF) is defined as the average fraction of total emissions that is inhaled by each person of a population (1 ppm = 1 × 10 -6 ), and the daily carbon monoxide (CO) pollutant exposure (E t ) is estimated by multiplying the average concentration of a specific micro-environment within one day. As a novelty, by considering time activity patterns and breathing rates in various micro-environments for three age groups, this paper introduces IF and E t into computational fluid dynamic (CFD) simulation to quantify the impacts of street layouts (street width/building height W/H = 1, 1.5, 2), source location, viaduct settings and noise barriers on the source-exposure correlation when realistic CO sources are defined. Narrower streets experience larger P_IF (1.51-5.21 ppm) and CO exposure, and leeward-side buildings always attain higher vehicular pollutant exposure than windward-side. Cases with a viaduct experience smaller P_IF (3.25-1.46 ppm) than cases without a viaduct (P_IF = 5.21-2.23 ppm) if the single ground-level CO source is elevated onto the viaduct. With two CO sources (both ground-level and viaduct-level), daily CO exposure rises 2.80-3.33 times but P_IF only change slightly. Noise barriers above a viaduct raise concentration between barriers, but slightly reduce vehicular exposure in near-road buildings. Because people spend most of their time indoors, vehicular pollutant exposure within near-road buildings can be 6-9 times that at pedestrian level. Although further studies are still required to provide practical guidelines, this paper provides effective methodologies to quantify the impacts of street/viaduct configurations on human exposure for urban design purpose. Copyright © 2016 Elsevier Ltd. All rights reserved.

Formaldehyde Exposures in a University Anatomy Laboratory

NASA Astrophysics Data System (ADS)

Winkler, Kyle William

Air sampling studies were conducted within a university anatomical laboratory during the embalmment of a cadaver in order to determine if dangerous concentrations of formaldehyde existed. Three air sampling studies were conducted in the anatomical laboratory on three separate days that a cadaver was being embalmed. Samples were collected and analyzed using the Occupational Safety and Health Administration (OSHA) Sampling and Analytical Methods: Method 52. Each air sampling study sampled for short term exposure limit (STEL) and time weighted mean (TWA) breathing zone formaldehyde concentrations as well as area TWA formaldehyde concentrations. A personal aldehyde monitor was also used in each air sampling study to sample for breathing zone formaldehyde concentrations. Measured TWA mean exposures to formaldehyde ranged from 0.15--1.3 parts per million (ppm), STEL formaldehyde exposures ranged from 0.019--0.64 ppm, and eight-hour TWAs ranged from 0.03 to 3.6 ppm. All 8-hour TWA formaldehyde concentrations sampled in the anatomy laboratory during an embalmment were less than the permissible exposure limit (PEL) required by OSHA.

Accounting for patient size in the optimization of dose and image quality of pelvis cone beam CT protocols on the Varian OBI system

PubMed Central

Moore, Craig S; Horsfield, Carl J; Saunderson, John R; Beavis, Andrew W

2015-01-01

Objective: The purpose of this study was to develop size-based radiotherapy kilovoltage cone beam CT (CBCT) protocols for the pelvis. Methods: Image noise was measured in an elliptical phantom of varying size for a range of exposure factors. Based on a previously defined “small pelvis” reference patient and CBCT protocol, appropriate exposure factors for small, medium, large and extra-large patients were derived which approximate the image noise behaviour observed on a Philips CT scanner (Philips Medical Systems, Best, Netherlands) with automatic exposure control (AEC). Selection criteria, based on maximum tube current–time product per rotation selected during the radiotherapy treatment planning scan, were derived based on an audit of patient size. Results: It has been demonstrated that 110 kVp yields acceptable image noise for reduced patient dose in pelvic CBCT scans of small, medium and large patients, when compared with manufacturer's default settings (125 kVp). Conversely, extra-large patients require increased exposure factors to give acceptable images. 57% of patients in the local population now receive much lower radiation doses, whereas 13% require higher doses (but now yield acceptable images). Conclusion: The implementation of size-based exposure protocols has significantly reduced radiation dose to the majority of patients with no negative impact on image quality. Increased doses are required on the largest patients to give adequate image quality. Advances in knowledge: The development of size-based CBCT protocols that use the planning CT scan (with AEC) to determine which protocol is appropriate ensures adequate image quality whilst minimizing patient radiation dose. PMID:26419892

An experiment on the dynamics of ion implantation and sputtering of surfaces

NASA Astrophysics Data System (ADS)

Wright, G. M.; Barnard, H. A.; Kesler, L. A.; Peterson, E. E.; Stahle, P. W.; Sullivan, R. M.; Whyte, D. G.; Woller, K. B.

2014-02-01

A major impediment towards a better understanding of the complex plasma-surface interaction is the limited diagnostic access to the material surface while it is undergoing plasma exposure. The Dynamics of ION Implantation and Sputtering Of Surfaces (DIONISOS) experiment overcomes this limitation by uniquely combining powerful, non-perturbing ion beam analysis techniques with a steady-state helicon plasma exposure chamber, allowing for real-time, depth-resolved in situ measurements of material compositions during plasma exposure. Design solutions are described that provide compatibility between the ion beam analysis requirements in the presence of a high-intensity helicon plasma. The three primary ion beam analysis techniques, Rutherford backscattering spectroscopy, elastic recoil detection, and nuclear reaction analysis, are successfully implemented on targets during plasma exposure in DIONISOS. These techniques measure parameters of interest for plasma-material interactions such as erosion/deposition rates of materials and the concentration of plasma fuel species in the material surface.

An experiment on the dynamics of ion implantation and sputtering of surfaces.

PubMed

Wright, G M; Barnard, H A; Kesler, L A; Peterson, E E; Stahle, P W; Sullivan, R M; Whyte, D G; Woller, K B

2014-02-01

A major impediment towards a better understanding of the complex plasma-surface interaction is the limited diagnostic access to the material surface while it is undergoing plasma exposure. The Dynamics of ION Implantation and Sputtering Of Surfaces (DIONISOS) experiment overcomes this limitation by uniquely combining powerful, non-perturbing ion beam analysis techniques with a steady-state helicon plasma exposure chamber, allowing for real-time, depth-resolved in situ measurements of material compositions during plasma exposure. Design solutions are described that provide compatibility between the ion beam analysis requirements in the presence of a high-intensity helicon plasma. The three primary ion beam analysis techniques, Rutherford backscattering spectroscopy, elastic recoil detection, and nuclear reaction analysis, are successfully implemented on targets during plasma exposure in DIONISOS. These techniques measure parameters of interest for plasma-material interactions such as erosion/deposition rates of materials and the concentration of plasma fuel species in the material surface.

Lethal exposure: An integrated approach to pathogen transmission via environmental reservoirs.

PubMed

Turner, Wendy C; Kausrud, Kyrre L; Beyer, Wolfgang; Easterday, W Ryan; Barandongo, Zoë R; Blaschke, Elisabeth; Cloete, Claudine C; Lazak, Judith; Van Ert, Matthew N; Ganz, Holly H; Turnbull, Peter C B; Stenseth, Nils Chr; Getz, Wayne M

2016-06-06

To mitigate the effects of zoonotic diseases on human and animal populations, it is critical to understand what factors alter transmission dynamics. Here we assess the risk of exposure to lethal concentrations of the anthrax bacterium, Bacillus anthracis, for grazing animals in a natural system over time through different transmission mechanisms. We follow pathogen concentrations at anthrax carcass sites and waterholes for five years and estimate infection risk as a function of grass, soil or water intake, age of carcass sites, and the exposure required for a lethal infection. Grazing, not drinking, seems the dominant transmission route, and transmission is more probable from grazing at carcass sites 1-2 years of age. Unlike most studies of virulent pathogens that are conducted under controlled conditions for extrapolation to real situations, we evaluate exposure risk under field conditions to estimate the probability of a lethal dose, showing that not all reservoirs with detectable pathogens are significant transmission pathways.

Prior exposure to a reverberant listening environment improves speech intelligibility in adult cochlear implant listeners.

PubMed

Srinivasan, Nirmal Kumar; Tobey, Emily A; Loizou, Philipos C

2016-01-01

The goal of this study is to investigate whether prior exposure to reverberant listening environment improves speech intelligibility of adult cochlear implant (CI) users. Six adult CI users participated in this study. Speech intelligibility was measured in five different simulated reverberant listening environments with two different speech corpuses. Within each listening environment, prior exposure was varied by either having the same environment across all trials (blocked presentation) or having different environment from trial to trial (unblocked). Speech intelligibility decreased as reverberation time increased. Although substantial individual variability was observed, all CI listeners showed an increase in the blocked presentation condition as compared to the unblocked presentation condition for both speech corpuses. Prior listening exposure to a reverberant listening environment improves speech intelligibility in adult CI listeners. Further research is required to understand the underlying mechanism of adaptation to listening environment.

10 CFR 35.70 - Surveys of ambient radiation exposure rate.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the surveys required by paragraph (a) of this section in an area(s) where patients or human research... 10 Energy 1 2013-01-01 2013-01-01 false Surveys of ambient radiation exposure rate. 35.70 Section... Requirements § 35.70 Surveys of ambient radiation exposure rate. (a) In addition to the surveys required by...

10 CFR 35.70 - Surveys of ambient radiation exposure rate.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the surveys required by paragraph (a) of this section in an area(s) where patients or human research... 10 Energy 1 2014-01-01 2014-01-01 false Surveys of ambient radiation exposure rate. 35.70 Section... Requirements § 35.70 Surveys of ambient radiation exposure rate. (a) In addition to the surveys required by...

10 CFR 35.70 - Surveys of ambient radiation exposure rate.

Code of Federal Regulations, 2010 CFR

2010-01-01

... the surveys required by paragraph (a) of this section in an area(s) where patients or human research... 10 Energy 1 2010-01-01 2010-01-01 false Surveys of ambient radiation exposure rate. 35.70 Section... Requirements § 35.70 Surveys of ambient radiation exposure rate. (a) In addition to the surveys required by...

10 CFR 35.70 - Surveys of ambient radiation exposure rate.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the surveys required by paragraph (a) of this section in an area(s) where patients or human research... 10 Energy 1 2012-01-01 2012-01-01 false Surveys of ambient radiation exposure rate. 35.70 Section... Requirements § 35.70 Surveys of ambient radiation exposure rate. (a) In addition to the surveys required by...

10 CFR 35.70 - Surveys of ambient radiation exposure rate.

Code of Federal Regulations, 2011 CFR

2011-01-01

... the surveys required by paragraph (a) of this section in an area(s) where patients or human research... 10 Energy 1 2011-01-01 2011-01-01 false Surveys of ambient radiation exposure rate. 35.70 Section... Requirements § 35.70 Surveys of ambient radiation exposure rate. (a) In addition to the surveys required by...

[Accumulative effects and long-term persistence of subliminal mere exposure].

PubMed

Kawakami, Naoaki; Yoshida, Fujio

2011-10-01

We examined the accumulative effects and long-term persistence of subliminal mere exposure. An accumulative exposure condition (100 exposures distributed over five days) and a massed exposure condition (100 exposures in one day) were used in a Go/No-go Association Task (GNAT), with assessments of likability from Time 1 (just after) to Time 6 (after three months). First, a single stimulus was shown subliminally for a total of 100 times. The results indicated that mere exposure effects occurred equally often at Time 1. However, after Time 2, likability gradually decreased under the massed exposure condition, while it did not decrease under the accumulative exposure condition until Time 6. Second, in order to investigate the effect of multiple exposure, five stimuli belonging to a common category were shown 20 times each, for a total of 100 times. An ANOVA suggested that massed exposure had an instantaneous effect on likability, whereas accumulative exposure had a long-term persistence effect. Also, multiple exposures strengthened the mere exposure effect.

Deposition, clearance, and shortening of Kevlar para-aramid fibrils in acute, subchronic, and chronic inhalation studies in rats.

PubMed

Kelly, D P; Merriman, E A; Kennedy, G L; Lee, K P

1993-10-01

The deposition and clearance of lung-deposited Kevlar para-aramid fibrils (subfibers) have been investigated as part of a subchronic and chronic inhalation toxicity testing program. Fibrils recovered from lung tissue in para-aramid-exposed Sprague-Dawley rats were microscopically counted and measured after exposures to airborne fibrils which were about 12 microns median length (ML) and < 0.3 micron median diameter. In each of three studies lung-recovered fibrils were progressively shorter with increasing residence time in the lungs. Twenty-eight days after a single 6-hr exposure at 400 respirable fibrils per cubic centimeter (f/cm3) the ML of recovered fibrils decreased to about 5 microns. Twenty-four months after a 3-week exposure to 25 or 400 f/cm3, fibrils reached about 2 microns ML. After 2 years of continuous exposure at 2.5, 25, or 100 f/cm3 or 1 year exposure plus 1 year recovery at 400 f/cm3, fibril ML approached 4 microns. In the 2-year study, the lung-fiber accumulation rate/exposure concentration was similar for the three highest concentrations and was about 3 x greater than that seen at 2.5 f/cm3, indicating that concentrations of about 25 f/cm3 or more may overwhelm clearance mechanisms. Time required for fibrils to be reduced to < 5 microns in the lung was markedly less at lower exposure concentration and shorter exposure time. The primary shortening mechanism is proposed to be long fibril cutting by enzymatic attack at fibril defects. However, length-selective fibril deposition and clearance may contribute to shortening in the first few days after exposure. The enzymatic cutting hypothesis is supported by measured increases in numbers of short fibers following cessation of exposures, continued shortening of the fibril length distribution up to 2 years following exposure, and in vitro fibril shortening after 3 months in a proteolytic enzyme preparation. The conclusion is that para-aramid fibrils are less durable in the lungs of rats than expected from the known chemical resistance of commercial yarn. These data suggest that at the low para-aramid fibril exposures found in the workplace, this fibril-shortening mechanism may limit the residence time of long fibers in the lungs of exposed workers. In addition, associated cascade impactor aerodynamic measurements indicate that due to their ribbon shape and curly nature, para-aramid fibrils behave aerodynamically larger than straight fibers.

Evaluating outcomes of endoscopic full-thickness plication for gastroesophageal reflux disease (GERD) with impedance monitoring.

PubMed

von Renteln, Daniel; Schmidt, Arthur; Riecken, Bettina; Caca, Karel

2010-05-01

Endoscopic full-thickness plication allows transmural suturing at the gastroesophageal junction to recreate the antireflux barrier. Multichannel intraluminal impedance monitoring (MII) can be used to detect nonacid or weakly acidic reflux, acidic swallows, and esophageal clearance time. This study used MII to evaluate the outcome of endoscopic full-thickness plication. In this study, 12 subsequent patients requiring maintenance proton pump inhibitor therapy underwent endoscopic full-thickness plication for treatment of gastroesophageal reflux disease. With patients off medication, MII was performed before and 6-months after endoscopic full-thickness plication. The total median number of reflux episodes was significantly reduced from 105 to 64 (p = 0.016). The median number of acid reflux episodes decreased from 73 to 43 (p = 0.016). Nonacid reflux episodes decreased from 23 to 21 (p = 0.306). The median bolus clearance time was 12 s before treatment and 11 s at 6 months (p = 0.798). The median acid exposure time was reduced from 6.8% to 3.4% (p = 0.008), and the DeMeester scores were reduced from 19 to 12 (p = 0.008). Endoscopic full-thickness plication significantly reduced total reflux episodes, acid reflux episodes, and total reflux exposure time. The DeMeester scores and total acid exposure time for the distal esophagus were significantly improved. No significant changes in nonacid reflux episodes and median bolus clearance time were encountered.

Modeling cumulative dose and exposure duration provided insights regarding the associations between benzodiazepines and injuries.

PubMed

Abrahamowicz, Michal; Bartlett, Gillian; Tamblyn, Robyn; du Berger, Roxane

2006-04-01

Accurate assessment of medication impact requires modeling cumulative effects of exposure duration and dose; however, postmarketing studies usually represent medication exposure by baseline or current use only. We propose new methods for modeling various aspects of medication use history and employment of them to assess the adverse effects of selected benzodiazepines. Time-dependent measures of cumulative dose or duration of use, with weighting of past exposures by recency, were proposed. These measures were then included in alternative versions of the multivariable Cox model to analyze the risk of fall related injuries among the elderly new users of three benzodiazepines (nitrazepam, temazepam, and flurazepam) in Quebec. Akaike's information criterion (AIC) was used to select the most predictive model for a given benzodiazepine. The best-fitting model included a combination of cumulative duration and current dose for temazepam, and cumulative dose for flurazepam and nitrazepam, with different weighting functions. The window of clinically relevant exposure was shorter for flurazepam than for the two other products. Careful modeling of the medication exposure history may enhance our understanding of the mechanisms underlying their adverse effects.

Changes in the provision of post-exposure prophylaxis for HIV after sexual exposure following introduction of guidelines and publicity campaigns.

PubMed

Roedling, S; Reeves, I; Copas, A J; Beattie, A; Edwards, S G; Fisher, M; Benn, P

2008-04-01

In July 2004, British Association of Sexual Health and HIV (BASHH) published guidelines for post-exposure prophylaxis following sexual exposure (PEPSE) and the Terence Higgins Trust (THT) launched a campaign promoting PEPSE among men who have sex with men (MSM). We evaluated subsequent changes in PEPSE attendances. Individuals requesting PEPSE in 2004 were identified from clinic databases. Comparisons of clinical data, exposure characteristics and follow-up were made pre and post campaign. Data were available for 197/216 (91%) PEP attendances. The proportion requesting PEP following sexual exposure increased significantly following the campaign. The majority commencing PEPSE were MSM, with the proportion of MSM increasing significantly from 36/46 (78%) pre to 76/80 (95%) following the campaign. Most prescriptions were in high-risk groups and within guidelines. Times to initiation and completion rates were unchanged. Access to PEPSE following the THT campaign and introduction of BASHH guidelines increased. Promotion of earlier initiation of PEPSE and improvement of completion and follow-up is required.

Work-related musculoskeletal complaints: some ergonomics challenges upon the start of a new century.

PubMed

Westgaard, R H

2000-12-01

Three themes likely to be important within health-related ergonomics in the coming years are discussed. The first two themes concern methods for risk analysis of low-level biomechanical and psychosocial exposures. The third theme is approaches to successful implementation of ergonomics interventions. Evidence on the assessment of low-level biomechanical and psychosocial exposures by instrumented measurements is discussed. It is concluded that, despite recent advances in our understanding of exposure-effect associations under these exposure conditions, we must at present rely on more subjective methods, employed in a collaboration between expert and worker. This approach to risk analysis identifies in most cases critical exposures in a work situation. The focus should then be on the successful implementation of measures against those exposures, as identification alone does not solve problems. The aim of improved health for the workers further requires that the full complement of risk factors be considered, including work, leisure time and person-based risk factors. Finally, the need to put ergonomics intervention initiatives in an organisational context is emphasised, and examples of approaches used by Norwegian companies are presented.

A review of air exchange rate models for air pollution exposure assessments.

PubMed

Breen, Michael S; Schultz, Bradley D; Sohn, Michael D; Long, Thomas; Langstaff, John; Williams, Ronald; Isaacs, Kristin; Meng, Qing Yu; Stallings, Casson; Smith, Luther

2014-11-01

A critical aspect of air pollution exposure assessments is estimation of the air exchange rate (AER) for various buildings where people spend their time. The AER, which is the rate of exchange of indoor air with outdoor air, is an important determinant for entry of outdoor air pollutants and for removal of indoor-emitted air pollutants. This paper presents an overview and critical analysis of the scientific literature on empirical and physically based AER models for residential and commercial buildings; the models highlighted here are feasible for exposure assessments as extensive inputs are not required. Models are included for the three types of airflows that can occur across building envelopes: leakage, natural ventilation, and mechanical ventilation. Guidance is provided to select the preferable AER model based on available data, desired temporal resolution, types of airflows, and types of buildings included in the exposure assessment. For exposure assessments with some limited building leakage or AER measurements, strategies are described to reduce AER model uncertainty. This review will facilitate the selection of AER models in support of air pollution exposure assessments.

Visualization of electromagnetic exposure near LTE antennae

NASA Astrophysics Data System (ADS)

Zvezdina, M. Yu; Shokova, Yu A.; Nazarova, O. Yu; Al-Ali, H. T. A.; Al-Farhan, G. H. A.

2018-01-01

Technical progress in wireless data transfer has given an opportunity to apply information and communication technologies in various areas of economics. Digital economy is linked to the 4th and 5th generation mobile network deployment. The peculiarities of the abovementioned standards decrease BTS antenna range three times in dense developed areas and worsen electromagnetic background in big cities. In the paper the comparative assessment results for rooftop electromagnetic exposure near BTS LTE and BTS GSM antennae are given. It is shown, that at the same level of transmitter power, energy flux density for LTE standard is three times less than the one for GSM. Moreover, the conclusion is made that the rooftop could be considered safe for people for indefinite time if antenna is placed more than 5 meters above the rooftop. The value of antenna height is taken to be on the safe side, as it is required by an application of “preventive principle”.

The Human Exposure Model (HEM): A Tool to Support Rapid ...

EPA Pesticide Factsheets

The US EPA is developing an open and publically available software program called the Human Exposure Model (HEM) to provide near-field exposure information for Life Cycle Impact Assessments (LCIAs). Historically, LCIAs have often omitted impacts from near-field sources of exposure. The use of consumer products often results in near-field exposures (exposures that occur directly from the use of a product) that are larger than environmentally mediated exposures (i.e. far-field sources)1,2. Failure to consider near-field exposures could result in biases in LCIA-based determinations of the relative sustainability of consumer products. HEM is designed to provide this information.Characterizing near-field sources of chemical exposures present a challenge to LCIA practitioners. Unlike far-field sources, where multimedia mass balance models have been used to determine human exposure, near-field sources require product-specific models of human exposure and considerable information on product use and product composition. Such information is difficult and time-consuming to gather and curate. The HEM software will characterize the distribution of doses and product intake fractions2 across populations of product users and bystanders, allowing for differentiation by various demographic characteristics. The tool incorporates a newly developed database of the composition of more than 17,000 products, data on physical and chemical properties for more than 2,000 chemicals, and mo

Clinical recommendation for treatment planning of sinus augmentation procedures by using presurgical CAT scan images: a preliminary report.

PubMed

Kutkut, Ahmad M; Andreana, Sebastiano; Kim, Hyeong-Ll; Monaco, Edward

2011-12-01

To propose a clinical recommendation based on anatomy of maxillary sinus before sinus augmentation procedure using presurgical computerized axial tomography (CAT) scan images. CAT scan images were randomly selected from previous completed implant cases. Proposed area for the lateral window osteotomy was outlined on the panorex image of the CAT scan. Sagittal section on the CAT scan that was in the center of the outlined window was selected for sinus measurement analysis. On CAT scan, 2 lines were drawn to measure the dimensions of sinus. One line measured the horizontal width and the other line measured the vertical height. Based on the measurement data, a classification of the maxillary sinus anatomy was proposed. Narrow sinus cavity indicates favorable type anatomy in terms of bone regeneration healing and wide sinus cavity as less favorable anatomy for patient treatment planning. A narrow sinus and greater exposure to the blood supply should require shorter healing times after grafting. Conversely, wider sinus cavities and less exposure to the blood supply would require a longer healing time before implant placement.

Assessment of long-term spatio-temporal radiofrequency electromagnetic field exposure.

PubMed

Aerts, Sam; Wiart, Joe; Martens, Luc; Joseph, Wout

2018-02-01

As both the environment and telecommunications networks are inherently dynamic, our exposure to environmental radiofrequency (RF) electromagnetic fields (EMF) at an arbitrary location is not at all constant in time. In this study, more than a year's worth of measurement data collected in a fixed low-cost exposimeter network distributed over an urban environment was analysed and used to build, for the first time, a full spatio-temporal surrogate model of outdoor exposure to downlink Global System for Mobile Communications (GSM) and Universal Mobile Telecommunications System (UMTS) signals. Though no global trend was discovered over the measuring period, the difference in measured exposure between two instances could reach up to 42dB (a factor 12,000 in power density). Furthermore, it was found that, taking into account the hour and day of the measurement, the accuracy of the surrogate model in the area under study was improved by up to 50% compared to models that neglect the daily temporal variability of the RF signals. However, further study is required to assess the extent to which the results obtained in the considered environment can be extrapolated to other geographic locations. Copyright © 2017 Elsevier Inc. All rights reserved.

Panel 2: anticipatory risk assessment: identifying, assessing, and mitigating exposure risks before they occur.

PubMed

Guidotti, Tee L; Pacha, Laura

2011-07-01

Health threats place the military mission and deployed service members at risk. A commander's focus is on preventing acute health risks, such as diarrhea, because these quickly compromise the mission. However, in recent conflicts chronic and long-term illness risks have emerged as concerns. Department of Defense and Joint Chiefs of Staff mandates require documentation of exposures and environmental conditions to reconstruct exposures and evaluate future health risks. Current processes for identifying and assessing hazards, including identification and assessment before deployment and in time to take action to prevent or reduce exposures, when followed, are generally adequate for known hazards. Identifying and addressing novel, unexpected risks remain challenges. Armed conflicts are associated with rapidly changing conditions, making ongoing hazard identification and assessment difficult. Therefore, surveillance of the environment for hazards and surveillance of personnel for morbidity must be practiced at all times. Communication of risk information to decision makers is critical but problematic. Preventive Medicine (PM) personnel should take responsibility for communicating this information to non-PM military medical people and to military commanders. Communication of risks identified and lessons learned between PM personnel of different military units is extremely important when one military unit replaces another in a deployed environment.

The relationship between exposure to alcohol advertising in stores, owning alcohol promotional items, and adolescent alcohol use.

PubMed

Hurtz, Shannon Q; Henriksen, Lisa; Wang, Yun; Feighery, Ellen C; Fortmann, Stephen P

2007-01-01

This paper describes adolescents' exposure to alcohol advertising in stores and to alcohol-branded promotional items and their association with self-reported drinking. A cross-sectional survey was administered in non-tracked required courses to sixth, seventh, and eighth graders (n = 2125) in three California middle schools. Logistic regressions compared the odds of ever (vs. never) drinking and current (vs. ever) drinking after controlling for psychosocial and other risk factors for adolescent alcohol use. Two-thirds of middle school students reported at least weekly visits to liquor, convenience, or small grocery stores where alcohol advertising is widespread. Such exposure was associated with higher odds of ever drinking, but was not associated with current drinking. One-fifth of students reported owning at least one alcohol promotional item. These students were three times more likely to have ever tried drinking and 1.5 times more likely to report current drinking than students without such items. This study provides clear evidence of an association of adolescent drinking with weekly exposure to alcohol advertising in stores and with ownership of alcohol promotional items. Given their potential influence on adolescent drinking behaviour, retail ads, and promotional items for alcohol deserve further study.

Design of the Experimental Exposure Conditions to Simulate Ionizing Radiation Effects on Candidate Replacement Materials for the Hubble Space Telescope

NASA Technical Reports Server (NTRS)

Smith, L. Montgomery

1998-01-01

In this effort, experimental exposure times for monoenergetic electrons and protons were determined to simulate the space radiation environment effects on Teflon components of the Hubble Space Telescope. Although the energy range of the available laboratory particle accelerators was limited, optimal exposure times for 50 keV, 220 keV, 350 keV, and 500 KeV electrons were calculated that produced a dose-versus-depth profile that approximated the full spectrum profile, and were realizable with existing equipment. For the case of proton exposure, the limited energy range of the laboratory accelerator restricted simulation of the dose to a depth of .5 mil. Also, while optimal exposure times were found for 200 keV, 500 keV and 700 keV protons that simulated the full spectrum dose-versus-depth profile to this depth, they were of such short duration that the existing laboratory could not be controlled to within the required accuracy. In addition to the obvious experimental issues, other areas exist in which the analytical work could be advanced. Improved computer codes for the dose prediction- along with improved methodology for data input and output- would accelerate and make more accurate the calculational aspects. This is particularly true in the case of proton fluxes where a paucity of available predictive software appears to exist. The dated nature of many of the existing Monte Carlo particle/radiation transport codes raises the issue as to whether existing codes are sufficient for this type of analysis. Other areas that would result in greater fidelity of laboratory exposure effects to the space environment is the use of a larger number of monoenergetic particle fluxes and improved optimization algorithms to determine the weighting values.

High Speed Photomicrography

NASA Astrophysics Data System (ADS)

Hyzer, William G.

1983-03-01

One of the most challenging areas in applying high-speed photography and videography in the plant and laboratory is in the recording of rapid events at macro and microscopic scales. Depth of field, exposure efficiency, working distance, and required exposure time are all reduced as optical magnification is increased, which severely taxes the skill and ingenuity of workers interested in recording any fast moving phenomena through the microscope or with magnifying lenses. This paper defines the problems inherent in photographing within macro and microscopic ranges and offers a systematic approach to optimizing the selection of equipment and choice of applicable techniques.

40 CFR 158.2260 - Applicator exposure.

Code of Federal Regulations, 2014 CFR

2014-07-01

... exposure data, provided the human pharmacokinetics of the pesticide or metabolite/analog compounds (i.e... 158.2260 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Antimicrobial Pesticide Data Requirements § 158.2260 Applicator exposure. (a...

40 CFR 158.2260 - Applicator exposure.

Code of Federal Regulations, 2013 CFR

2013-07-01

... exposure data, provided the human pharmacokinetics of the pesticide or metabolite/analog compounds (i.e... 158.2260 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Antimicrobial Pesticide Data Requirements § 158.2260 Applicator exposure. (a...

Data Collection and Administration Procedures for the Job Performance Measurement System

DTIC Science & Technology

1992-10-01

acceptable to the MAJCC4s and would allow data collection to proceed smoothly with effective use of time and resources. Table 2 lists the number of bases...WTPT, but this was not required. Previous exposure to the JPM project was also beneficial, though not required. Finally, to ensure an effective line of...PDCIKR 1. Provide team leadership to facilitate effective operation and the collection of quality data. 2. Serve as the liaison between team and AFHRL

Teen driving exposure in Michigan: demographic and behavioral characteristics.

PubMed

Ehsani, J P; Bingham, C R; Shope, J T; Sunbury, T M; Kweon, B

2010-07-01

Motor vehicle crashes are the leading cause of death and a leading cause of non-fatal injury for teenagers in the United States. Understanding teen crashes requires a good measure of crash risk. The measure of exposure that is used in the calculation of risk estimates determines what information the resulting rates and rate ratios provide and the conclusions that can be drawn about teen driver crash risk. The purpose of this study is to provide an initial description of three measures of individual-level exposure to driving for 16-17-year-olds in the state of Michigan, using data from the state-wide Michigan Travel Counts survey conducted in 2004 and 2005. The total miles, minutes, and trips driven within the 48-h survey period were calculated for each respondent using self-reported measures and geo-spatial mapping. Young drivers who worked and those with greater access to a vehicle drove significantly more than their peers who did not work and those who had less access to a vehicle. Those from urban residences spent more time driving than those from rural residences. All 16-17-year-olds drove substantially more during the day than at night, and on their own than with passengers. There was little difference in overall driving exposure and driving behavior between young men and young women. This study provides an initial description of driving exposure and behavior for a population for which there is very little specific information about amounts and patterns of individual driving exposure. The relationship between individual driving exposure and risk of motor vehicle crash, injury or fatality requires further investigation. Copyright 2010 Elsevier Ltd. All rights reserved.

Congenital Dandy Walker malformation associated with first trimester warfarin: a case report and literature review.

PubMed

Kaplan, L C

1985-12-01

While the warfarin embryopathy is well defined, central nervous system abnormalities associated with gestational warfarin exposure require further definition. Based on the timing of warfarin exposure in humans, it has been proposed that second- and third-trimester exposure predisposes to CNS abnormalities while first-trimester exposure more typically is associated with the warfarin embryopathy. A case is presented of a liveborn male with Dandy Walker malformation, agenesis of the corpus callosum, and Peter anomaly of the right eye who was exposed to warfarin between the 8th and 12th weeks of gestation who had none of the stigmata of the warfarin embryopathy. His is the first known case of exposure confined to the first trimester, and the fifth case of Dandy Walker malformation among a total of 15 CNS cases associated with this drug. This case offers evidence that Dandy Walker malformation may represent a distinct complication of in utero first-trimester exposure, and consideration of these particular abnormalities with exposure limited to a period prior to the known appearance of vitamin K-dependent clotting factors suggests that warfarin has a direct teratogenic effect on central nervous system morphogenesis.

Immediate, but no delayed, behavioral response to a snake model by captive black tufted-ear marmosets.

PubMed

Cagni, Priscila; Sampaio, Ana Cristhina; Ribeiro, Natália B; Barros, Marilia

2011-07-01

Whether callitrichids are naturally capable of detecting and responding to predators - or if such skills are learned - remains a controversial issue, with results differing in terms of species, predator and encounter conditions. Therefore, the behavioral response of naïve adult captive black tufted-ear marmosets (Callithrix penicillata) was assessed before, during, 0 and 4 h after a 5-min encounter with a snake and flower model. Using a two-phase cross-over design, marmosets (n = 16) were submitted to one trial for each stimulus, divided into four 5-min intervals: pre-exposure, exposure and post-exposure observations held 0 and 4h later. The snake exposure increased the number of gazes made towards the stimulus and the time cage-mates spent close to each other, as well as induced tsik-tsik alarm/mobbing calls, while inhibiting foraging and decreasing the time spent near the snake's location. After the snake was removed, all changes were immediately reversed. Mobbing was not observed. The flower stimulus only increased direct gazes and time spent in proximity during its presentation. All marmosets were captive-born and snake-naïve yet had recently been confronted with a cat stimulus in a previous experiment. Thus, previous experiences with snakes may be required for marmosets to fully develop appropriate immediate and long-term responses. Copyright © 2011 Elsevier B.V. All rights reserved.

A comparative ecological risk assessment of Orimulsion and Fuel Oil No. 6 in the coastal marine environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harwell, M.; Ault, J.; Gentile, J.

1995-12-31

The conduct of comparative ecological risk assessments (CERA) resulting from the release of anthropogenic stressors into coastal marine environments requires theoretical and methodological innovations to integrate contaminant exposure with populations at risk over time and space scales. Consequently, predicted risks must be scaled to allow comparisons of relative ecological impacts in three physical dimensions plus time. This study was designed to compare the risks from hypothetical spills of Orimulsion and Fuel Oil No. 6 into the Tampa Bay ecosystem. The CERA framework used in this study integrates numerical hydrodynamic and transport-and-fate, toxicological, and biological models with extensive spatially explicit databasesmore » that describe the distributions of critical species and habitats. The presentation of the comparative ecological risks is facilitated by visualization and GIS techniques to allow realistic comparisons of toxicant exposures and their co-occurrence with key biological resources over time and across the seascape. A scaling methodology is presented that uses toxicological data as scalars for graphically representing the ecological effects associated with exposure levels for each scenario simulation. The CERA model serves as an interactive tool for assessing the relative ecological consequences of a range of potential exposure scenarios and for forecasting the longer-term productivity of critical biological resources and habitats that are key to ecosystem structure and function.« less

Numerical simulation of high intensity focused ultrasound temperature distribution for transcranial brain therapy

NASA Astrophysics Data System (ADS)

Zhang, Qian; Wang, Yizhe; Zhou, Wenzheng; Zhang, Ji; Jian, Xiqi

2017-03-01

To provide a reference for the HIFU clinical therapeutic planning, the temperature distribution and lesion volume are analyzed by the numerical simulation. The adopted numerical simulation is based on a transcranial ultrasound therapy model, including an 8 annular-element curved phased array transducer. The acoustic pressure and temperature elevation are calculated by using the approximation of Westervelt Formula and the Pennes Heat Transfer Equation. In addition, the Time Reversal theory and eliminating hot spot technique are combined to optimize the temperature distribution. With different input powers and exposure times, the lesion volume is evaluated based on temperature threshold theory. The lesion region could be restored at the expected location by the time reversal theory. Although the lesion volume reduces after eliminating the peak temperature in the skull and more input power and exposure time is required, the injury of normal tissue around skull could be reduced during the HIFU therapy. The prediction of thermal deposition in the skull and the lesion region could provide a reference for clinical therapeutic dose.

Clenbuterol toxicity: a NSW poisons information centre experience.

PubMed

Brett, Jonathan; Dawson, Andrew H; Brown, Jared A

2014-03-03

To describe the epidemiology and toxicity of clenbuterol in exposures reported to the NSW Poisons Information Centre (NSWPIC). Retrospective observational study analysing data from all calls about clenbuterol exposure recorded in the NSWPIC database from 1 January 2004 to 31 December 2012. The NSWPIC coversthe Australian jurisdictions New South Wales, Tasmania and the Australian Capital Territory 24 hours a day and provides after-hours cover for the rest of Australia for 7 nights each fortnight. Total number of exposures, source of call (hospital, health care worker, member of the public), time from exposure to call, reasons for drug use, clinical features and advice given. Callers reported 63 exposures to clenbuterol, with a dramatic increase from three in 2008 to 27 in 2012. Of the 63 calls, 35 were from hospital, two from paramedics, one from general practice and 21 direct from the public. At least 53 patients (84%) required hospitalisation. The commonest reasons for use were bodybuilding and slimming. The most common features were tachycardia (24 patients), gastrointestinal disturbance (16) and tremor (11). Exposure was also associated with cardiotoxicity including one cardiac arrest in a 21-year-old man. Although a well recognised doping issue among elite athletes, clenbuterol use has spread out into the general public, especially during 2012, and should be considered in patients using bodybuilding or slimming products who present with protracted sympathomimetic features. The potential for misuse of this substance requires reconsideration of its current poison schedule registration and its availability.

Design considerations for a new, high resolution Micro-Angiographic Fluoroscope based on a CMOS sensor (MAF-CMOS).

PubMed

Loughran, Brendan; Swetadri Vasan, S N; Singh, Vivek; Ionita, Ciprian N; Jain, Amit; Bednarek, Daniel R; Titus, Albert; Rudin, Stephen

2013-03-06

The detectors that are used for endovascular image-guided interventions (EIGI), particularly for neurovascular interventions, do not provide clinicians with adequate visualization to ensure the best possible treatment outcomes. Developing an improved x-ray imaging detector requires the determination of estimated clinical x-ray entrance exposures to the detector. The range of exposures to the detector in clinical studies was found for the three modes of operation: fluoroscopic mode, high frame-rate digital angiographic mode (HD fluoroscopic mode), and DSA mode. Using these estimated detector exposure ranges and available CMOS detector technical specifications, design requirements were developed to pursue a quantum limited, high resolution, dynamic x-ray detector based on a CMOS sensor with 50 μm pixel size. For the proposed MAF-CMOS, the estimated charge collected within the full exposure range was found to be within the estimated full well capacity of the pixels. Expected instrumentation noise for the proposed detector was estimated to be 50-1,300 electrons. Adding a gain stage such as a light image intensifier would minimize the effect of the estimated instrumentation noise on total image noise but may not be necessary to ensure quantum limited detector operation at low exposure levels. A recursive temporal filter may decrease the effective total noise by 2 to 3 times, allowing for the improved signal to noise ratios at the lowest estimated exposures despite consequent loss in temporal resolution. This work can serve as a guide for further development of dynamic x-ray imaging prototypes or improvements for existing dynamic x-ray imaging systems.

Nuclear Thermal Propulsion Development Risks

NASA Technical Reports Server (NTRS)

Kim, Tony

2015-01-01

There are clear advantages of development of a Nuclear Thermal Propulsion (NTP) for a crewed mission to Mars. NTP for in-space propulsion enables more ambitious space missions by providing high thrust at high specific impulse ((is) approximately 900 sec) that is 2 times the best theoretical performance possible for chemical rockets. Missions can be optimized for maximum payload capability to take more payload with reduced total mass to orbit; saving cost on reduction of the number of launch vehicles needed. Or missions can be optimized to minimize trip time significantly to reduce the deep space radiation exposure to the crew. NTR propulsion technology is a game changer for space exploration to Mars and beyond. However, 'NUCLEAR' is a word that is feared and vilified by some groups and the hostility towards development of any nuclear systems can meet great opposition by the public as well as from national leaders and people in authority. The public often associates the 'nuclear' word with weapons of mass destruction. The development NTP is at risk due to unwarranted public fears and clear honest communication of nuclear safety will be critical to the success of the development of the NTP technology. Reducing cost to NTP development is critical to its acceptance and funding. In the past, highly inflated cost estimates of a full-scale development nuclear engine due to Category I nuclear security requirements and costly regulatory requirements have put the NTP technology as a low priority. Innovative approaches utilizing low enriched uranium (LEU). Even though NTP can be a small source of radiation to the crew, NTP can facilitate significant reduction of crew exposure to solar and cosmic radiation by reducing trip times by 3-4 months. Current Human Mars Mission (HMM) trajectories with conventional propulsion systems and fuel-efficient transfer orbits exceed astronaut radiation exposure limits. Utilizing extra propellant from one additional SLS launch and available energy in the NTP fuel, HMM radiation exposure can be reduced significantly.

Outcomes of chlorine exposure: a 5-year poison center experience in 598 patients.

PubMed

LoVecchio, Frank; Blackwell, Scott; Stevens, Donna

2005-06-01

The outcome after chlorine exposures has been poorly described. We conducted a 5-year retrospective poison control center review of chlorine exposure cases. The inclusion criteria were self (or surrogate) reported concentrated 'chlorine' liquid (> or =10% concentration of sodium hypochorite) or tablet (> or =90% concentration) exposure. Two reviewers blinded to the main purpose of the study reviewed charts and a third reviewed 10% of the charts, and a kappa score was calculated. Parameters reviewed included the type of exposure (tablets, liquid or both), symptoms (cough, chest pain, etc.), time to symptom onset, treatment received, hospital referral rate and outcomes. A total of 598 patient records were reviewed, with a mean age of 29.63 years (range 11-82); 41.5% (248) were exposures to tablets and 53.5% (320) were exposed to liquid chlorine, with the remainder exposed to both. Complaints included shortness of breath, eye irritation, nasal complaints, cough, and skin complaints. Sixty-nine patients were evaluated at a healthcare facility (11 referred by a poison control center and 58 were self-referrals). Five patients were admitted and four out of the five had a history of reactive airway disease. The mean time to peak symptoms was 94.4 min, 63.2% reached peak symptoms within 30 min, and 82% within 120 min, with 74% of all patients asymptomatic within 150 min. All five admitted patients were discharged within 48 h, and all others remained clinically well at a 24 h telephone follow-up. Exposure to chlorine tablets and liquid rarely requires hospital referral with almost all symptoms resolving within 24 h.

Causal mediation analysis for longitudinal data with exogenous exposure

PubMed Central

Bind, M.-A. C.; Vanderweele, T. J.; Coull, B. A.; Schwartz, J. D.

2016-01-01

Mediation analysis is a valuable approach to examine pathways in epidemiological research. Prospective cohort studies are often conducted to study biological mechanisms and often collect longitudinal measurements on each participant. Mediation formulae for longitudinal data have been developed. Here, we formalize the natural direct and indirect effects using a causal framework with potential outcomes that allows for an interaction between the exposure and the mediator. To allow different types of longitudinal measures of the mediator and outcome, we assume two generalized mixed-effects models for both the mediator and the outcome. The model for the mediator has subject-specific random intercepts and random exposure slopes for each cluster, and the outcome model has random intercepts and random slopes for the exposure, the mediator, and their interaction. We also expand our approach to settings with multiple mediators and derive the mediated effects, jointly through all mediators. Our method requires the absence of time-varying confounding with respect to the exposure and the mediator. This assumption is achieved in settings with exogenous exposure and mediator, especially when exposure and mediator are not affected by variables measured at earlier time points. We apply the methodology to data from the Normative Aging Study and estimate the direct and indirect effects, via DNA methylation, of air pollution, and temperature on intercellular adhesion molecule 1 (ICAM-1) protein levels. Our results suggest that air pollution and temperature have a direct effect on ICAM-1 protein levels (i.e. not through a change in ICAM-1 DNA methylation) and that temperature has an indirect effect via a change in ICAM-1 DNA methylation. PMID:26272993

Teaching surgical exposures to undergraduate medical students: an integration concept for anatomical and surgical education.

PubMed

Hammer, Niels; Hepp, Pierre; Löffler, Sabine; Schleifenbaum, Stefan; Steinke, Hanno; Klima, Stefan

2015-06-01

Decreasing numbers of students are interested in starting a surgical career, posing substantial challenges to patient care in the next years. The anatomy course is one of the key subjects in medical training, especially in surgical disciplines. Innovative teaching concepts that integrate surgically relevant anatomy and manual dexterity might help boost student interest in surgery. A preclinical workshop entitled "Surgical exposures" was developed. A team of anatomists and surgeons introduced the surgical exposures, demonstrating the procedures on Thiel-fixed body donors. Following this introduction, students practiced the exposures in an operating room-like manner. A six-point Likert scale was used to evaluate the workshop and to compare it to the first-year dissection course. The overall evaluation result for the surgical exposures was excellent, proving to be a significantly better result when compared to the first-year dissection course. The students were more satisfied with the teaching time invested by the peers and regarded the workshop as clinically highly relevant. Furthermore, they felt that questions were addressed better and that the overall atmosphere was better than in the gross anatomy course. Subject to criticism was the course size and practicing time in both cases. The surgical exposures workshop provides preclinical students with clinically relevant anatomy and manual dexterity. It may positively influence the decision to follow a surgical career. This course, however, requires extensive teaching resources. The given concept may help implement practical medical skills in the preclinical curriculum, strengthening the professional identity of surgeons and anatomists.

Status: Crewmember Noise Exposures on the International Space Station

NASA Technical Reports Server (NTRS)

Limardo-Rodriguez, Jose G.; Allen, Christopher S.; Danielson, Richard W.

2015-01-01

The International Space Station (ISS) provides a unique environment where crewmembers from the US and our international partners work and live for as long as 6 to 12 consecutive months. During these long-durations ISS missions, noise exposures from onboard equipment are posing concerns for human factors and crewmember health risks, such as possible reductions in hearing sensitivity, disruptions of crew sleep, interference with speech intelligibility and voice communications, interference with crew task performance, and reduced alarm audibility. It is crucial to control acoustical noise aboard ISS to acceptable noise exposure levels during the work-time period, and to also provide a restful sleep environment during the sleep-time period. Acoustic dosimeter measurements, obtained when the crewmember wears the dosimeter for 24-hour periods, are conducted onboard ISS every 60 days and compared to ISS flight rules. NASA personnel then assess the acoustic environment to which the crewmembers are exposed, and provide recommendations for hearing protection device usage. The purpose of this paper is to provide an update on the status of ISS noise exposure monitoring and hearing conservation strategies, as well as to summarize assessments of acoustic dosimeter data collected since the Increment 36 mission (April 2013). A description of the updated noise level constraints flight rule, as well as the Noise Exposure Estimation Tool and the Noise Hazard Inventory implementation for predicting crew noise exposures and recommending to ISS crewmembers when hearing protection devices are required, will be described.

Comparison of air pollution exposures in active vs. passive travel modes in European cities: A quantitative review.

PubMed

de Nazelle, Audrey; Bode, Olivier; Orjuela, Juan Pablo

2017-02-01

Transport microenvironments tend to have higher air pollutant concentrations than other settings most people encounter in their daily lives. The choice of travel modes may affect significantly individuals' exposures; however such considerations are typically not accounted for in exposure assessment used in environmental health studies. In particular, with increasing interest in the promotion of active travel, health impact studies that attempt to estimate potential adverse consequences of potential increased pollutant inhalation during walking or cycling have emerged. Such studies require a quantification of relative exposures in travel modes. The literature on air pollution exposures in travel microenvironments in Europe was reviewed. Studies which measured various travel modes including at least walking or cycling in a simultaneous or quasi-simultaneous design were selected. Data from these studies were harmonized to allow for a quantitative synthesis of the estimates. Ranges of ratios and 95% confidence interval (CI) of air pollution exposure between modes and between background and transportation modes were estimated. Ten studies measuring fine particulate matter (PM 2.5 ), black carbon (BC), ultrafine particles (UFP), and/or carbon monoxide (CO) in the walk, bicycle, car and/or bus modes were included in the analysis. Only three reported on CO and BC and results should be interpreted with caution. Pedestrians were shown to be the most consistently least exposed of all across studies, with the bus, bicycle and car modes on average 1.3 to 1.5 times higher for PM 2.5 ; 1.1 to 1.7 times higher for UFP; and 1.3 to 2.9 times higher for CO; however the 95% CI included 1 for the UFP walk to bus ratio. Only for BC were pedestrians more exposed than bus users on average (bus to walk ratio 0.8), but remained less exposed than those on bicycles or in cars. Car users tended to be the most exposed (from 2.9 times higher than pedestrians for BC down to similar exposures to cyclists for UFP on average). Bus exposures tended to be similar to that of cyclists (95% CI including 1 for PM 2.5 , CO and BC), except for UFP where they were lower (ratio 0.7). A quantitative method that synthesizes the literature on air pollution exposure in travel microenvironments for use in health impact assessments or potentially for epidemiology was conducted. Results relevant for the European context are presented, showing generally greatest exposures in car riders and lowest exposure in pedestrians. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of Temperature Cycling and Exposure to Extreme Temperatures on Reliability of Solid Tantalum Capacitors

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander

2007-01-01

In this work, results of multiple temperature cycling (TC) (up to 1,000 cycles) of different types of solid tantalum capacitors are analyzed and reported. Deformation of chip tantalum during temperature variations simulating reflow soldering conditions was measured to evaluate the possibility of the pop-corning effect in the parts. To simulate the effect of short-time exposures to solder reflow temperatures on the reliability of tantalum capacitors, several part types were subjected to multiple cycles (up to 100) between room temperature and 240 C with periodical measurements of electrical characteristics of the parts. Mechanisms of degradation caused by temperature cycling and exposure to high temperatures, and the requirements of MIL-PRF-55365 for assessment of the resistance of the parts to soldering heat are discussed.

DEVELOPMENT OF CHEMICAL METHODS TO CHARACTERIZE EXPOSURE TO EDCS IN THE NEUSE RIVER BASIN

EPA Science Inventory

To develop a quantitative health and environmental risk assessment of endocrine disrupting compounds (EDCs), information on exposures is essential. A full exposure assessment has complex requirements that require preliminary information to direct further research in this area....

Does a patent foramen ovale matter when using a remote-controlled magnetic system for pulmonary vein isolation?

PubMed

Gate-Martinet, Alexie; Da Costa, Antoine; Romeyer-Bouchard, Cécile; Bisch, Laurence; Levallois, Marie; Isaaz, Karl

2014-02-01

Pulmonary vein isolation (PVI) takes longer when using a patent foramen ovale (PFO) compared with a transseptal puncture in paroxysmal atrial fibrillation (AF) with manual catheter ablation. To our knowledge, no data exist concerning the impact of a PFO on AF ablation procedure variables when using a remote magnetic navigation (RMN) system. To assess the impact of a PFO when using an RMN system in patients requiring AF ablation. Between December 2011 and December 2012, catheter ablation was performed remotely using the CARTO(®) 3 system in 167 consecutive patients who underwent PVI for symptomatic drug-refractory AF. The radiofrequency generator was set to a fixed power ≤ 35 W. The primary endpoint was wide-area circumferential PVI confirmed by spiral catheter recording during ablation for all patients and including additional lesion lines (left atrial roof) or complex fractionated atrial electrograms for persistent AF. Secondary endpoints included procedural data. Mean age 58±10 years; 18% women; 107 (64%) patients with symptomatic paroxysmal AF; 60 (36%) with persistent AF; CHA2DS2-VASc score 1.2 ± 1. The PFO presence was evidenced in 49/167 (29.3%) patients during the procedure but in only 26/167 (16%) by transoesophageal echocardiography. Median procedure time 2.5 ± 1 hours; median total X-ray exposure time 14 ± 7 minutes; transseptal puncture and catheter positioning time 7.5 ± 5 minutes; left atrium electroanatomical reconstruction time 3 ± 2.3 minutes; catheter ablation time 3 ± 3 minutes. No procedure time or X-ray exposure differences were observed between patients with or without a PFO during magnetic navigation catheter ablation. X-ray exposure time was significantly reduced using a PFO compared with double transseptal puncture access. A PFO does not affect magnetic navigation during AF ablation; procedure times and X-ray exposure were similar. Septal catheter probing is mandatory to limit X-ray exposure and prevent potential complications. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Mass carbon monoxide poisoning among television viewers of a football match.

PubMed

Godoy, P; Pont, C; Artigues, A; Alsedà, M

2016-11-01

The objective was to study a mass carbon monoxide (CO) poisoning and the characteristics of the asymptomatic cases. On the 2nd of February, 2015, a group of more than 30 television viewers of a football match contacted the emergency department due to suspected CO poisoning from a butane stove. A visual inspection of the location of the exposure and a descriptive epidemiological study were conducted. Based on the type of variable, the presence of a statistical association was studied with Fisher's exact test or the Kruskal-Wallis test. Thirty-four of the 39 individuals were affected (87.2%). The exposed individuals had a mean age of 43.8 years (SD, 22.1), and 28.2% (11/39) were women. The time of exposure was 52.4min (SD, 21.0), and the mean distance from the oven was 4.2m (SD, 2.5). The most common symptoms were headache (50%), nausea (20.6%), weakness (20.6%) and dizziness (14.7%). The carboxyhaemoglobin (COHb) levels were very high (13.8% ±5.8%). Some 97.1% of the individuals required oxygen therapy, and 39.4% required hyperbaric chamber treatment. Some 29.5% of the cases had no symptoms but showed COHb levels similar to those that did have symptoms (13.6% vs. 15.3%, nonsignificant difference). The asymptomatic cases had a shorter exposure time (38.3min vs. 53.3min; P<.036). Almost a third of the exposed individuals were asymptomatic, even with COHb levels similar to those of the symptomatic patients, and the majority of these asymptomatic patients even required oxygen treatment in a hyperbaric chamber. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Medicina Interna (SEMI). All rights reserved.

Temporal Effects of Message Congruency on Attention to and Recall of Pictorial Health Warning Labels on Cigarette Packages.

PubMed

Lochbuehler, Kirsten; Wileyto, E Paul; Mercincavage, Melissa; Souprountchouk, Valentina; Burdge, Jordan Z; Tang, Kathy Z; Cappella, Joseph N; Strasser, Andrew A

2018-06-16

Recent research has shown that message congruency is beneficial to recall of pictorial health warning label (PWL) content after initial exposure. Despite less attention to the text warning, smokers exposed to congruent PWLs were more likely to recall the text and the message. This study aimed to replicate these findings and to examine whether congruency also affects recall after multiple exposures over time. 320 daily smokers (39.7% female; cigarettes/day: M = 15.31, SD = 7.15) were randomized to one congruent or incongruent PWL and attended 4 laboratory sessions over 10 days. During each session, eye-movements were recorded while viewing the PWL and open-ended recall of label content was assessed after exposure. Smokers who were exposed to a congruent PWL were more likely to recall the text (p = .01) and the message (p = .02) and less likely to recall the image (p = .003) of the PWL after initial exposure. By day 4, incongruent PWLs were recalled equally well as congruent PWLs. Independent of condition, image recall was initially high and remained high while text and message recall was relatively low initially but increased over time. It was not until day 7 that about 80% of text and message recall was observed. Even when exposed to the same PWL over time, smokers require multiple exposures to recall the text and the message of a PWL. More research on the effects of congruency in the natural environment, where smokers are exposed to multiple PWLs, is needed.

The difficulties in establishing an occupational exposure limit for carbon nanotubes

NASA Astrophysics Data System (ADS)

Ellenbecker, M.; Tsai, S.-J.; Jacobs, M.; Riediker, M.; Peters, T.; Liou, S.; Avila, A.; FossHansen, S.

2018-05-01

Concern over the health effects from the inhalation of carbon nanotubes (CNTs) has been building for some time, and adverse health effects found in animal studies include acute and chronic respiratory damage, cardiac inflammation, and cancer including mesothelioma, heretofore only associated with asbestos exposure. The strong animal evidence of toxicity requires that the occupational hygiene community develops strategies for reducing or eliminating worker exposures to CNTs; part of this strategy involves the setting of occupational exposure limits (OELs) for CNTs. A number of government agencies and private entities have established OELs for CNTs; some are mass-based, while others rely on number concentration. We review these various proposed standards and discuss the pros and cons of each approach. We recommend that specific action be taken, including intensified outreach to employers and employees concerning the potential adverse health effects from CNT inhalation, the development of more nuanced OELs that reflect the complex nature of CNT exposure, a broader discussion of these issues among all interested parties, and further research into important unanswered questions including optimum methods to evaluate CNT exposures. We conclude that current animal toxicity evidence suggests that strong action needs to be taken to minimize exposures to CNTs, and that any CNT OEL should be consistent with the need to minimize exposures.

Estimation of respirable dust exposure among coal miners in South Africa.

PubMed

Naidoo, Rajen; Seixas, Noah; Robins, Thomas

2006-06-01

The use of retrospective occupational hygiene data for epidemiologic studies is useful in determining exposure-outcome relationships, but the potential for exposure misclassification is high. Although dust sampling in the South African coal industry has been a legal requirement for several decades, these historical data are not readily adequate for estimating past exposures. This study describes the respirable coal mine dust levels in three South African coal mines over time. Each of the participating mining operations had well-documented dust sampling information that was used to describe historical trends in dust exposure. Investigator-collected personal dust samples were taken using standardized techniques from the face, backbye (underground jobs not at the coal face), and surface from 50 miners at each mine, repeated over three sampling cycles. Job histories and exposure information was obtained from a sample of 684 current miners and 188 ex-miners. Linear models were developed to estimate the exposure levels associated with work in each mine, exposure zone, and over time using a combination of operator-collected historical data and investigator-collected samples. The estimated levels were then combined with work history information to calculate cumulative exposure metrics for the miner cohort. The mean historical and investigator-collected respirable dust levels were within international norms and South African standards. Silica content of the dust samples was also below the 5% regulatory action level. Mean respirable dust concentrations at the face, based on investigator-collected samples, were 0.9 mg/m(3), 1.3 mg/m(3), and 1.9 mg/m(3) at Mines 1, 2, and 3, respectively. The operator-collected samples showed considerable variability across exposure zones, mines, and time, with the annual means at the face ranging from 0.4 mg/m(3) to 2.9 mg/m(3). Statistically significant findings were found between operator- and investigator-collected dust samples. Model-based arithmetic mean dust estimates at the face were 1.2 mg/m(3), 2.0 mg/m(3), and 0.9 mg/m(3) for Mines 1, 2, and 3, respectively. Using these levels, the mean cumulative exposure for the cohort was 56.8 mg-years/m(3). Current miners had a mean cumulative exposure of 66.5 mg-years/m(3), compared with ex-miners of 26.8 mg-years/m(3). Improvements in dust management or the use of different sampling equipment could account for the significant differences seen between operator- and investigator-collected data. Regression modeling for estimating mean dust levels over time using combined historical and investigator-collected data seems a reasonable method and useful in constructing models to describe cumulative exposures in a cohort of current and ex-miners.

Outcome-Dependent Sampling with Interval-Censored Failure Time Data

PubMed Central

Zhou, Qingning; Cai, Jianwen; Zhou, Haibo

2017-01-01

Summary Epidemiologic studies and disease prevention trials often seek to relate an exposure variable to a failure time that suffers from interval-censoring. When the failure rate is low and the time intervals are wide, a large cohort is often required so as to yield reliable precision on the exposure-failure-time relationship. However, large cohort studies with simple random sampling could be prohibitive for investigators with a limited budget, especially when the exposure variables are expensive to obtain. Alternative cost-effective sampling designs and inference procedures are therefore desirable. We propose an outcome-dependent sampling (ODS) design with interval-censored failure time data, where we enrich the observed sample by selectively including certain more informative failure subjects. We develop a novel sieve semiparametric maximum empirical likelihood approach for fitting the proportional hazards model to data from the proposed interval-censoring ODS design. This approach employs the empirical likelihood and sieve methods to deal with the infinite-dimensional nuisance parameters, which greatly reduces the dimensionality of the estimation problem and eases the computation difficulty. The consistency and asymptotic normality of the resulting regression parameter estimator are established. The results from our extensive simulation study show that the proposed design and method works well for practical situations and is more efficient than the alternative designs and competing approaches. An example from the Atherosclerosis Risk in Communities (ARIC) study is provided for illustration. PMID:28771664

How Does Patient Radiation Exposure Compare With Low-dose O-arm Versus Fluoroscopy for Pedicle Screw Placement in Idiopathic Scoliosis?

PubMed

Su, Alvin W; McIntosh, Amy L; Schueler, Beth A; Milbrandt, Todd A; Winkler, Jennifer A; Stans, Anthony A; Larson, A Noelle

Intraoperative C-arm fluoroscopy and low-dose O-arm are both reasonable means to assist in screw placement for idiopathic scoliosis surgery. Both using pediatric low-dose O-arm settings and minimizing the number of radiographs during C-arm fluoroscopy guidance decrease patient radiation exposure and its deleterious biological effect that may be associated with cancer risk. We hypothesized that the radiation dose for C-arm-guided fluoroscopy is no less than low-dose O-arm scanning for placement of pedicle screws. A multicenter matched-control cohort study of 28 patients in total was conducted. Fourteen patients who underwent O-arm-guided pedicle screw insertion for spinal fusion surgery in 1 institution were matched to another 14 patients who underwent C-arm fluoroscopy guidance in the other institution in terms of the age of surgery, body weight, and number of imaged spine levels. The total effective dose was compared. A low-dose pediatric protocol was used for all O-arm scans with an effective dose of 0.65 mSv per scan. The effective dose of C-arm fluoroscopy was determined using anthropomorphic phantoms that represented the thoracic and lumbar spine in anteroposterior and lateral views, respectively. The clinical outcome and complications of all patients were documented. The mean total effective dose for the O-arm group was approximately 4 times higher than that of the C-arm group (P<0.0001). The effective dose for the C-arm patients had high variability based on fluoroscopy time and did not correlate with the number of imaged spine levels or body weight. The effective dose of 1 low-dose pediatric O-arm scan approximated 85 seconds of the C-arm fluoroscopy time. All patients had satisfactory clinical outcomes without major complications that required returning to the operating room. Radiation exposure required for O-arm scans can be higher than that required for C-arm fluoroscopy, but it depends on fluoroscopy time. Inclusion of more medical centers and surgeons will better account for the variability of C-arm dose due to distinct patient characteristics, surgeon's preference, and individual institution's protocol. Level III-case-control study.

Assessing workplace chemical exposures: the role of exposure monitoring.

PubMed

Harper, Martin

2004-05-01

Occupational exposure is the condition of being subjected through employment to a chemical, physical, or biological agent, or to a specific process, practice, behavior, or organization of work. Exposure to a chemical agent is typically the contact of that agent with the outer boundary of a subject, such as the respiratory system, skin, or digestive system. In occupational hygiene we are most concerned with exposure through the respiratory system, although, increasingly we are concerned with the results of dermal exposures, including those exposures to the skin that can be transferred to the mouth and digestive system. This presentation will detail methods available for assessing personal exposures to chemicals through monitoring. The results from monitoring can then be compared to established guidelines and regulations, although this is not the only rationale for making measurements. These monitoring methods are currently used around the world to establish the benchmark hazard from which risk to the worker can be predicted. The presentation will describe the general techniques for assessing exposures to the respiratory system from chemical gases and vapors, chemical dusts, and exposures to the skin from bulk chemicals or chemical contamination of surfaces. For respiratory exposures, direct-reading instruments are available for spot measurements, and for monitoring short-term fluctuations in concentration. However, most standards and regulations are based on time-integrated (time-weighted average) exposures, requiring longer-term integrative methods. Therefore, the specific focus of this review will be the methods available for full work-shift sampling. For gases and vapors this will include taking whole-air samples in canisters or polymer bags, or concentration of chemicals by absorption in liquids or adsorption on solid sorbents, with subsequent chemical analysis. Chemical concentration can take place by pumping air through the sorbing media, or by allowing molecules to diffuse to the sorbent surface. Transfer of the collected chemicals to the analytical instrumentation can be accomplished using solvent displacement and injection, or through the application of heat to bring the collected molecules back into the vapor phase. For particles, the particle size is important as this determines the site of deposition in the lungs, and so time-integrated sampling on filters using various types of size-selective samplers is preferred. Finally, some techniques that have been used to assess the potential for chemical contamination of the skin are presented. Biomonitoring is another tool that can be used to assess exposure, and the results are more relevant to dosimetric considerations than exposure. Biomonitoring is a complex subject worthy of a separate review, and will be considered only briefly here.

A critical test of Drosophila anaesthetics: Isoflurane and sevoflurane are benign alternatives to cold and CO2.

PubMed

MacMillan, Heath A; Nørgård, Mikkel; MacLean, Heidi J; Overgaard, Johannes; Williams, Catherine J A

2017-08-01

Anaesthesia is often a necessary step when studying insects like the model organism Drosophila melanogaster. Most studies of Drosophila and other insects that require anaesthesia use either cold exposure or carbon dioxide exposure to induce a narcotic state. These anaesthetic methods are known to disrupt physiology and behavior with increasing exposure, and thus ample recovery time is required prior to experimentation. Here, we examine whether two halogenated ethers commonly used in vertebrate anaesthesia, isoflurane and sevoflurane, may serve as alternative means of insect anaesthesia. Using D. melanogaster, we generated dose-response curves to identify exposure times for each anaesthetic (cold, CO 2 , isoflurane and sevoflurane) that allow for five-minutes of experimental manipulation of the animals after the anaesthetic was removed (i.e. 5min recovery doses). We then compared the effects of this practical dose on high temperature, low temperature, starvation, and desiccation tolerance, as well as locomotor activity and fecundity of female flies following recovery from anaesthesia. Cold, CO 2 and isoflurane each had significant or near significant effects on the traits measured, but the specific effects of each anaesthetic differed, and effects on stress tolerance generally did not persist if the flies were given 48h to recover from anaesthesia. Sevoflurane had no measureable effect on any of the traits examined. Care must be taken when choosing an anaesthetic in Drosophila research, as the impacts of specific anaesthetics on stress tolerance, behavior and reproduction can widely differ. Sevoflurane may be a practical alternative to cold and CO 2 anaesthesia in insects - particularly if flies are to be used for experiments shortly after anesthesia. Copyright © 2017 Elsevier Ltd. All rights reserved.

Applications of Cosmogenic He-3 and Ne-21 Dating to Glacial Moraines in Antarctica and California

NASA Astrophysics Data System (ADS)

Sams, S.; Morgan, D. J.; Balco, G.; Putkonen, J.; Bibby, T.

2015-12-01

The depositional age of moraines can be determined through cosmogenic nuclide exposure dating. These ages are useful in establishing a glacial history of an area and ascribing age constraints to transport processes. Be-10 is the most common nuclide used for exposure dating today, but this method is both expensive and time consuming because it requires analysis by accelerator mass spectrometry (AMS). He-3 and Ne-21 can be analyzed using noble gas mass spectrometry, which is more cost efficient than AMS and requires less chemical preparation. We collected samples from areas in Moraine Canyon, Antarctica (86.10° S, 157.75° W), which is a dry valley in the Transantarctic Mountains. Dolerite boulders along a transect of recessional moraines were sampled in the typical fashion of using a large piece of the boulder for analysis. Pyroxene minerals have been separated from these samples following the method of Bromley et al. (2014) using hydrofluoric acid. Exposure ages will be calculated from the He-3 concentrations in them. In the Mono Lake area of California, moraines were sampled from Bloody Canyon and McGee Creek sites. Instead of collecting a sample from an individual boulder, we collected approximately 25 granitic pebbles (1-3 cm) from 4-6 sites along the crest of the moraines following the method of Briner (2009). Each suite of pebbles was crushed together, and quartz minerals were separated from the agglomeration of pebbles. Cosmogenic Ne-21 will be measured from these samples to determine their exposure age. From these two field sites, we will use He-3 and Ne-21 to better understand the timing and extent of glaciation in these areas.

Hepatitis A outbreak on a floating restaurant in Florida, 1986.

PubMed

Lowry, P W; Levine, R; Stroup, D F; Gunn, R A; Wilder, M H; Konigsberg, C

1989-01-01

In April and May 1986, the largest reported foodborne outbreak of hepatitis A in Florida state history occurred among patrons and employees of a floating restaurant. A total of 103 cases (97 patrons and six employees) were identified. The exposure period lasted 31 days (March 20-April 19), making this the most prolonged hepatitis A outbreak to occur in a restaurant that to date has been reported to the Centers for Disease Control. The exposure period was divided into time intervals (peak, early, late, and total) for calculation of food-specific attack rates. The authors showed that green salad was an important vehicle of transmission for each phase of the exposure period, with the highest adjusted odds ratio for the three-day peak exposure interval (March 28-30), 6.8 (p = 0.001). Non-salad pantry items and mixed bar drinks were also identified as vehicles of transmission; both were more important during the early interval of the exposure period than during the late interval. Two of six infected employees worked in the pantry and may have sequentially infected patrons. Though rare, this outbreak suggests that hepatitis A infection among employees may allow for transmission to patrons for prolonged periods of time. Prevention of such outbreaks requires prompt reporting of ill patrons with rapid identification of infected employees and correction of food handling practices.

TSK 6498 - DEVELOPMENT OF MOLECULAR INDICATORS OF EXPOSURE TO ENDOCRINE DISRUPTING COMPOUNDS, PESTICIDES & OTHER XENOBIOTIC AGENTS.

EPA Science Inventory

Accurate and precise characterization of exposure of aquatic ecological resources to chemical stressors is required for ecological risk assessment. Within this assessment, the study of the vulnerability of these resources requires comparative exposure assessments across watershe...

The sensitivity of an hydroponic lettuce root elongation bioassay to metals, phenol and wastewaters.

PubMed

Park, Jihae; Yoon, Jeong-Hyun; Depuydt, Stephen; Oh, Jung-Woo; Jo, Youn-Min; Kim, Kyungtae; Brown, Murray T; Han, Taejun

2016-04-01

The root elongation bioassay is one of the most straightforward test methods used for environmental monitoring in terms of simplicity, rapidity and economy since it merely requires filter paper, distilled water and Petri dishes. However, filter paper as a support material is known to be problematic as it can reduce the sensitivity of the test. The newly developed hydroponic method reported here differs from the conventional root elongation method (US EPA filter paper method) in that no support material is used and the exposure time is shorter (48 h in this test versus 120 h in the US EPA test). For metals, the hydroponic test method was 3.3 (for Hg) to 57 (for Cu) times more sensitive than the US EPA method with the rank orders of sensitivity, estimated from EC50 values, being Cu≥Cd>Ni≥Zn≥Hg for the former and Hg≥Cu≥Ni≥Cd≥Zn for the latter methods. For phenol, the results did not differ significantly; EC50 values were 124 mg L(-1) and 108-180 mg L(-1) for the hydroponic and filter paper methods, respectively. Lettuce was less sensitive than daphnids to wastewaters, but the root elongation response appears to be wastewater-specific and is especially sensitive for detecting the presence of fluorine. The new hydroponic test thus provides many practical advantages, especially in terms of cost and time-effectiveness requiring only a well plate, a small volume of distilled water and short exposure period; furthermore, no specialist expertise is required. The method is simpler than the conventional EPA technique in not using filter paper which can influence the sensitivity of the test. Additionally, plant seeds have a long shelf-life and require little or no maintenance. Copyright © 2015 Elsevier Inc. All rights reserved.

Word Learning in 6-Month-Olds: Fast Encoding-Weak Retention

ERIC Educational Resources Information Center

Friedrich, Manuela; Friederici, Angela D.

2011-01-01

There has been general consensus that initial word learning during early infancy is a slow and time-consuming process that requires very frequent exposure, whereas later in development, infants are able to quickly learn a novel word for a novel meaning. From the perspective of memory maturation, this shift in behavioral development might represent…

Safety testing of lithium cells

NASA Technical Reports Server (NTRS)

Liberto, Nick

1991-01-01

Safety testing is intended to simulate, under laboratory conditions and controls, situations that will subject a cell to externally induced stress. The stresses can occur at any time during the useful life of the cell, from the time of manufacture until it is expended during mission deployment. Abuse testing can be divided into three major categories: Electrical, Mechanical, and Thermal. Although electrical abuses are generally found to occur during handling or deployment, Mechanical and Thermal stresses can be induced during transportation and storage. Therefore, it would be prudent to include predicted environmental exposure as part of the test plan. In the selection of a test program. specific test requirements should be tailored to meet the predicted mission requirements.

Safety testing of lithium cells

NASA Astrophysics Data System (ADS)

Liberto, Nick

1991-05-01

Safety testing is intended to simulate, under laboratory conditions and controls, situations that will subject a cell to externally induced stress. The stresses can occur at any time during the useful life of the cell, from the time of manufacture until it is expended during mission deployment. Abuse testing can be divided into three major categories: Electrical, Mechanical, and Thermal. Although electrical abuses are generally found to occur during handling or deployment, Mechanical and Thermal stresses can be induced during transportation and storage. Therefore, it would be prudent to include predicted environmental exposure as part of the test plan. In the selection of a test program. specific test requirements should be tailored to meet the predicted mission requirements.

Impact of Early Postnatal Androgen Exposure on Voice Development

PubMed Central

Grisa, Leila; Leonel, Maria L.; Gonçalves, Maria I. R.; Pletsch, Francisco; Sade, Elis R.; Custódio, Gislaine; Zagonel, Ivete P. S.; Longui, Carlos A.; Figueiredo, Bonald C.

2012-01-01

Background The impact of early postnatal androgen exposure on female laryngeal tissue may depend on certain characteristics of this exposure. We assessed the impact of the dose, duration, and timing of early androgen exposure on the vocal development of female subjects who had been treated for adrenocortical tumor (ACT) in childhood. Methods The long-term effects of androgen exposure on the fundamental vocal frequency (F0), vocal pitch, and final height and the presence of virilizing signs were examined in 9 adult (age, 18.4 to 33.5 years) and 10 adolescent (13.6 to 17.8 years) female ACT patients. We also compared the current values with values obtained 0.9 years to 7.4 years after these subjects had undergone ACT surgery, a period during which they had shown normal androgen levels. Results Of the 19 subjects, 17 (89%) had been diagnosed with ACT before 4 years of age, 1 (5%) at 8.16 years, and 1 (5%) at 10.75 years. Androgen exposure (2 to 30 months) was sufficiently strong to cause pubic hair growth in all subjects and clitoromegaly in 74% (14/19) of the subjects, but did not reduce their height from the target value. Although androgen exposure induced a remarkable reduction in F0 (132 Hz) and moderate pitch virilization in 1 subject and partial F0 virilization, resulting in F0 of 165 and 169 Hz, in 2 subjects, the majority had normal F0 ranging from 189 to 245 Hz. Conclusions Female laryngeal tissue is less sensitive to androgen exposure between birth and adrenarche than during other periods. Differential larynx sensitivity to androgen exposure in childhood and F0 irreversibility in adulthood are age-, concentration-, duration-, and timing-dependent events that may also be affected by exposure to inhibitory or stimulatory hormones. Further studies are required to better characterize each of these factors. PMID:23284635

Exposure to crystalline silica at Alberta work sites: review of controls.

PubMed

Radnoff, Diane; Todor, Maria S; Beach, Jeremy

2015-01-01

From 2009 to 2013, Alberta Jobs, Skills, Training, and Labour (JSTL) conducted a project to evaluate exposure to crystalline silica and assess controls to protect workers. Information on exposure results has been previously reported; this article discusses the data collected on workplace controls. Information on work site controls was collected during exposure assessments consisting of qualitative information on controls in place and used by workers at the time of the assessments. Where there was sufficient data, the information was further analyzed to evaluate the impact of a particular control. While many types of controls were observed, they were not always effective or in use. The control available most often was respiratory protective equipment (RPE). Generally, when respirators were used, they were correctly selected for the level of measured exposure. However, not all workers who were potentially overexposed wore respirators at the time of the assessments. When the use of respirators was taken into account, about one-third of workers were still potentially exposed over the Alberta occupational exposure limit. The industries with the highest levels of exposure tended to be those with the most unprotected workers. Issues were identified with the use of improper work practices such as dry cleaning methods, lack of documented work procedures, poor housekeeping, and lack of training which may have contributed to worker exposure levels. There is a wide range in the efficacy of controls, particularly engineering controls. Most of the literature focuses on engineering controls; however administrative controls also play a role in reducing worker exposure. Data collected in this work indicated that simple changes to work procedures and behavior (such as improved housekeeping) may be effective, low-cost ways to reduce workplace exposure. More study is required to evaluate the impact and efficacy of administrative controls such as housekeeping and training. Employers must select and evaluate controls in the context of overall workplace health and safety programs and ensure that they are supported by supervision, good work practices. and training.

Glycemic control of diabetes patients under continuous rocket attacks.

PubMed

Soskolne, Varda; Dekel, Rachel; Vinker, Shlomo

2016-01-01

Evidence regarding the detrimental effects of exposure to stress on glycemic control among diabetes patients has mainly focused on personal life events or acute trauma. However, the effects of continuous exposure to extreme stress on type 2 diabetes patients have rarely been studied. The aim of the current study was to examine the association of continuous exposure to rocket attacks with glycemic control and with risk factors for diabetes complications among civilian type 2 diabetes patients. We focus on patients residing in the Western Negev in the south of Israel that has been subjected to rocket attacks fired from Gaza since the end of 2001. A two-arm retrospective cohort study of type 2 diabetes patients, aged 35-70 years, residing in a region with chronic exposure to rocket attacks (N = 1697) and in a non-exposed comparison region in Israel (N = 3000). Data were retrieved from the Health Maintenance Organization (HMO)'s database for four time periods representing exposure: chronic-2008; elevated-2009 (post'Cast Lead' operation); return to chronic-2010, 2011. Data included socio-demographic variables, HbA 1c , BMI, LDL cholesterol, blood pressure. General Linear Models (GLM) were used for analysis. For HbA 1c , the model yielded a significant main effect for time, a borderline significance main effect for region, and a significant time by region interaction: no differences in HbA 1c levels between the regions in 2008 and 2009, followed by significant differences between the regions in 2010 and 2011 when HbA 1c continued to increase in the exposed region but decreased in the comparison region. Regarding risk factors, a significant main effect for time for LDL cholesterol only, and significant main effects for region were found in all factors: BMI and LDL cholesterol were higher in the exposed than in the comparison region, but blood pressure values were lower. Continuous exposure to rocket attacks is associated with glycemic control and risk factors in a complex pattern. These preliminary findings require further studies of diverse types of civilian exposure to continuous extreme stress.

Advances in EPA’s Rapid Exposure and Dosimetry Project (Interagency Alternatives Assessment Webinar)

EPA Science Inventory

Estimates of human and ecological exposures are required as critical input to risk-based prioritization and screening of chemicals. The CSS Rapid Exposure and Dosimetry project seeks to develop the data, tools, and evaluation approaches required to generate rapid and scientifical...

Survival distributions impact the power of randomized placebo-phase design and parallel groups randomized clinical trials.

PubMed

Abrahamyan, Lusine; Li, Chuan Silvia; Beyene, Joseph; Willan, Andrew R; Feldman, Brian M

2011-03-01

The study evaluated the power of the randomized placebo-phase design (RPPD)-a new design of randomized clinical trials (RCTs), compared with the traditional parallel groups design, assuming various response time distributions. In the RPPD, at some point, all subjects receive the experimental therapy, and the exposure to placebo is for only a short fixed period of time. For the study, an object-oriented simulation program was written in R. The power of the simulated trials was evaluated using six scenarios, where the treatment response times followed the exponential, Weibull, or lognormal distributions. The median response time was assumed to be 355 days for the placebo and 42 days for the experimental drug. Based on the simulation results, the sample size requirements to achieve the same level of power were different under different response time to treatment distributions. The scenario where the response times followed the exponential distribution had the highest sample size requirement. In most scenarios, the parallel groups RCT had higher power compared with the RPPD. The sample size requirement varies depending on the underlying hazard distribution. The RPPD requires more subjects to achieve a similar power to the parallel groups design. Copyright © 2011 Elsevier Inc. All rights reserved.

40 CFR 158.1070 - Post-application exposure data requirements table.

Code of Federal Regulations, 2011 CFR

2011-07-01

... applicable residue dissipation data to dermal exposure data is required. 3. Turf grass transferable residue dissipation data are required when pesticides are applied to turf grass. Dislodgeable foliar residue dissipation data are required when pesticides are applied to the foliage of plants other than turf grass. 4...

40 CFR 158.1070 - Post-application exposure data requirements table.

Code of Federal Regulations, 2010 CFR

2010-07-01

... applicable residue dissipation data to dermal exposure data is required. 3. Turf grass transferable residue dissipation data are required when pesticides are applied to turf grass. Dislodgeable foliar residue dissipation data are required when pesticides are applied to the foliage of plants other than turf grass. 4...

Secondhand smoke avoidance by preteens living with smokers: To leave or stay?

PubMed Central

Ding, Ding; Wahlgren, Dennis R.; Liles, Sandy; Jones, Jennifer A.; Hughes, Suzanne C.; Hovell, Melbourne F.

2010-01-01

Introduction Secondhand smoke (SHS) is hazardous to children’s health. Designing interventions to reduce exposure requires understanding children’s behavior in the presence of smokers, yet little is known about this behavior. Purpose To determine whether children’s avoidance of SHS is associated with lower exposure and to explore predictors of avoidance based on a behavioral ecological model. Method Preteens aged 8–13 (N=358) living with a smoker identified their primary source of SHS exposure, and reported whether they left (avoided exposure) or stayed the last time they were exposed to that person’s smoke. The SHS avoidance measure was validated by examining associations with SHS exposure. Multivariable Logistic Regression was used to determine predictors of SHS avoidance. Results Based on urine cotinine and reported exposure, preteens who left the presence of SHS had lower exposure than those who stayed. Preteens were more likely to leave SHS if they were less physically mature, had not tried smoking, had a firm commitment not to smoke, did not assist family smoking, had family/friends who discouraged breathing SHS, or had friends who disliked smoking. Discussion Most SHS exposure reduction interventions have targeted changes in smokers’ behavior. Reductions can also be achieved by changing exposed nonsmokers’ behavior, such as avoiding the exposure. Future studies should measure young people’s SHS avoidance and test interventions to increase their avoidance practices. PMID:20634003

Increase of Long-chain Branching by Thermo-oxidative Treatment of LDPE

NASA Astrophysics Data System (ADS)

Rolón-Garrido, Víctor H.; Luo, Jinji; Wagner, Manfred H.

2011-07-01

Low-density polyethylene (LDPE) was exposed to thermal and thermo-oxidative treatment at 170 °C, and subsequently characterized by linear-viscoelastic measurements and in uniaxial extension. The Molecular Stress Function (MSF) model was used to quantify the elongational viscosities measured. For the thermally treated samples, exposure times between 2 and 6 hours were applied. Formation of long-chain branching (LCB) was found to occur only during the first two hours of thermal treatment. At longer exposure times, no difference in the level of strain hardening was observed. This was quantified by use of the MSF model: the nonlinear parameter fmax2 increased from fmax2 = 14 for the virgin sample to fmax2 = 22 for the samples thermally treated between 2 and 6 hours. For the thermo-oxidatively treated samples, which were exposed to air during thermal treatment between 30 and 90 minutes, the level of strain hardening increases drastically up to fmax2 = 55 with increasing exposure times from 30 up to 75 min due to LCB formation, and then decreases for an exposure time of 90 minutes due to chain scission dominating LCB formation. The nonlinear parameter β of the MSF model was found to be β = 2 for all samples, indicating that the general type of the random branching structure remains the same under all thermal conditions. Consequently only the parameter fmax2 of the MSF model and the linear-viscoelastic spectra were required to describe quantitatively the experimental observations. The strain hardening index, which is sometimes used to quantify strain hardening, follows accurately the trend of the MSF model parameter fmax2.

Image information content and patient exposure.

PubMed

Motz, J W; Danos, M

1978-01-01

Presently, patient exposure and x-ray tube kilovoltage are determined by image visibility requirements on x-ray film. With the employment of image-processing techniques, image visibility may be manipulated and the exposure may be determined only by the desired information content, i.e., by the required degree of tissue-density descrimination and spatial resolution. This work gives quantitative relationships between the image information content and the patient exposure, give estimates of the minimum exposures required for the detection of image signals associated with particular radiological exams. Also, for subject thickness larger than approximately 5 cm, the results show that the maximum information content may be obtained at a single kilovoltage and filtration with the simultaneous employment of image-enhancement and antiscatter techniques. This optimization may be used either to reduce the patient exposure or to increase the retrieved information.

Exploratory study on a statistical method to analyse time resolved data obtained during nanomaterial exposure measurements

NASA Astrophysics Data System (ADS)

Clerc, F.; Njiki-Menga, G.-H.; Witschger, O.

2013-04-01

Most of the measurement strategies that are suggested at the international level to assess workplace exposure to nanomaterials rely on devices measuring, in real time, airborne particles concentrations (according different metrics). Since none of the instruments to measure aerosols can distinguish a particle of interest to the background aerosol, the statistical analysis of time resolved data requires special attention. So far, very few approaches have been used for statistical analysis in the literature. This ranges from simple qualitative analysis of graphs to the implementation of more complex statistical models. To date, there is still no consensus on a particular approach and the current period is always looking for an appropriate and robust method. In this context, this exploratory study investigates a statistical method to analyse time resolved data based on a Bayesian probabilistic approach. To investigate and illustrate the use of the this statistical method, particle number concentration data from a workplace study that investigated the potential for exposure via inhalation from cleanout operations by sandpapering of a reactor producing nanocomposite thin films have been used. In this workplace study, the background issue has been addressed through the near-field and far-field approaches and several size integrated and time resolved devices have been used. The analysis of the results presented here focuses only on data obtained with two handheld condensation particle counters. While one was measuring at the source of the released particles, the other one was measuring in parallel far-field. The Bayesian probabilistic approach allows a probabilistic modelling of data series, and the observed task is modelled in the form of probability distributions. The probability distributions issuing from time resolved data obtained at the source can be compared with the probability distributions issuing from the time resolved data obtained far-field, leading in a quantitative estimation of the airborne particles released at the source when the task is performed. Beyond obtained results, this exploratory study indicates that the analysis of the results requires specific experience in statistics.

20171003 - Exposure Research in EPA’s Chemical Safety for Sustainability Research Program (ACC LRI SST Science Discussion)

EPA Science Inventory

Estimates of human and ecological exposures are required as critical input to risk-based prioritization and screening of chemicals. This project seeks to develop the data, tools, and evaluation approaches required to generate rapid and scientifically-defensible exposure predictio...

Study on the association between residential exposure to N, N-dimethylformamide and hospitalization for respiratory disease

NASA Astrophysics Data System (ADS)

Wang, Cui; Tian, WeiLi; Wei, YuMei; Li, XiaoXiao; Zhang, QingYu; Huang, ChanKe

2013-10-01

Some studies have confirmed the adverse effects of N, N-dimethylformamide (DMF) on the different organs in occupational exposure workers. However, to the best of our knowledge, risk assessment in the general population has not been available. In this study, a time series analysis of the relationship between DMF exposure and respiratory hospitalization was performed in Longwan district of China in 2008. Generalized additive model (GAMs) reflected that a 101.0 μg m-3 (inter-quartile range) increase in the 1-day lag concentration of DMF resulted in a 1.17 (95% CI: 1.09-1.25) increased relative risk of hospitalization for respiratory problems. The dose-response curve representing the relationship between DMF and the logarithm of the number of hospitalization was adequately linear at 4-200 μg m-3. We proposed a risk on respiratory disease in non-occupational DMF exposure. More information is required to verify this observation and the other endpoints to general population should be investigated during long-term DMF exposure.

Effect of time of day and duration into shift on hazardous exposures to biological fluids.

PubMed

Macias, D J; Hafner, J; Brillman, J C; Tandberg, D

1996-06-01

To determine whether hospital employee biological hazardous exposure rates varied with time of day or increased with time interval into shift. This was a retrospective occurrence report review conducted at a university hospital with an emergency medicine residency program. Health care worker biological hazardous exposure data over a 30-month period were reviewed. Professional status, date, time, and type of exposure (needlestick, laceration, splash), time interval into shift of exposure, and hospital location of exposure were recorded. Hourly employee counts and risky procedure counts were matched by location with each reported exposure, to determine hourly rates of biological hazardous exposures. Analysis of 411 recorded exposures demonstrated that more people were exposed between 9:00 AM and 11:00 AM (p < 0.05), yet the exposure risk did not vary significantly when expressed as the number of exposures per worker or per procedure. Of the 393 exposures with data describing time interval into shift when the exposure occurred, significant numbers of exposures occurred during the first hour and at shift's end [when corrected for exposures per worker (p < 0.05) or exposures per procedure (p < 0.05)]. While the number of exposures are increased in the AM hours, the exposure rate (as a function of workers or procedures) does not vary with time of the day. However, the exposure rate is increased during the first hour and last 2 hours of a shift. Efforts to increase worker precautions at the beginning and end of shifts are warranted.

Minimum exposure limits and measured relationships between the vitamin D, erythema and international commission on non-ionizing radiation protection solar ultraviolet.

PubMed

Downs, Nathan; Parisi, Alfio; Butler, Harry; Turner, Joanna; Wainwright, Lisa

2015-01-01

The International Commission on Non-Ionizing Radiation Protection (ICNIRP) has established guidelines for exposure to ultraviolet radiation in outdoor occupational settings. Spectrally weighted ICNIRP ultraviolet exposures received by the skin or eye in an 8 h period are limited to 30 J m(-2). In this study, the time required to reach the ICNIRP exposure limit was measured daily in 10 min intervals upon a horizontal plane at a subtropical Australian latitude over a full year and compared with the effective Vitamin D dose received to one-quarter of the available skin surface area for all six Fitzpatrick skin types. The comparison of measured solar ultraviolet exposures for the full range of sky conditions in the 2009 measurement period, including a major September continental dust event, show a clear relationship between the weighted ICNIRP and the effective vitamin D dose. Our results show that the horizontal plane ICNIRP ultraviolet exposure may be used under these conditions to provide minimum guidelines for the healthy moderation of vitamin D, scalable to each of the six Fitzpatrick skin types. © 2014 The American Society of Photobiology.

Environmental lead exposure: a public health problem of global dimensions.

PubMed Central

Tong, S.; von Schirnding, Y. E.; Prapamontol, T.

2000-01-01

Lead is the most abundant of the heavy metals in the Earth's crust. It has been used since prehistoric times, and has become widely distributed and mobilized in the environment. Exposure to and uptake of this non-essential element have consequently increased. Both occupational and environmental exposures to lead remain a serious problem in many developing and industrializing countries, as well as in some developed countries. In most developed countries, however, introduction of lead into the human environment has decreased in recent years, largely due to public health campaigns and a decline in its commercial usage, particularly in petrol. Acute lead poisoning has become rare in such countries, but chronic exposure to low levels of the metal is still a public health issue, especially among some minorities and socioeconomically disadvantaged groups. In developing countries, awareness of the public health impact of exposure to lead is growing but relatively few of these countries have introduced policies and regulations for significantly combating the problem. This article reviews the nature and importance of environmental exposure to lead in developing and developed countries, outlining past actions, and indicating requirements for future policy responses and interventions. PMID:11019456

Toward a Stress Process Model of Children’s Exposure to Physical Family and Community Violence

PubMed Central

Brooks-Gunn, Jeanne

2011-01-01

Theoretically informed models are required to further the comprehensive understanding of children’s ETV. We draw on the stress process paradigm to forward an overall conceptual model of ETV (ETV) in childhood and adolescence. Around this conceptual model, we synthesize research in four dominant areas of the literature which are detailed but often disconnected including: (1) exposure to three forms of physical violence (e.g., child physical maltreatment, interparental violence, and community ETV); (2) the multilevel correlates and causes of ETV (e.g., neighborhood characteristics including concentrated disadvantage; family characteristics including socio-economic status and family stressors); (3) a range of consequences of ETV (e.g., internalizing and externalizing mental health problems, role transitions, and academic outcomes); and (4) multilevel and cross domain mediators and moderators of ETV influences (e.g., school and community factors, family social support, and individual coping resources). We highlight the range of interconnected processes through which violence exposures may influence children and suggest opportunities for prevention and intervention. We further identify needed future research on children’s ETV including coping resources as well as research on cumulative contributions of violence exposure, violence exposure modifications, curvilinearity, and timing of exposure. PMID:19434492

[Evaluation of dental X-ray apparatus in terms of patient exposure to ionizing radiation].

PubMed

Olszewski, Jerzy; Wrzesień, Małgorzata

2017-06-27

The use of X-ray in dental procedures causes exposure of the patient to ionizing radiation. This exposure depends primarily on the parameters used in tooth examination. The aim of the study was to determine the patients exposure and to assess the technical condition of X-ray tubes. Seventeen hundred dental offices were covered by the questionnaire survey and 740 questionnaires were sent back. Direct measurements were performed in 100 units by using the thermoluminescent detectors and X-ray films. The results showed that the most commonly used exposure time is 0.22±0.16 s. The average entrance dose for the parameters used most commonly by dentists is 1.7±1.4 mGy. The average efficiency of X-ray tube estimated on the basis of exposures is 46.5±23.7 μGy/mAs. The study results indicate that the vast majority of X-ray tubes meet the requirements specified in the binding regulations. Med Pr 2017;67(4):491-496. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Determination of methyltetrahydrophthalic anhydride in air using gas chromatography with electron-capture detection.

PubMed

Johyama, Y; Yokota, K; Fujiki, Y; Takeshita, T; Morimoto, K

1999-10-01

Methyltetrahydrophthalic anhydride (MTHPA) stimulates the production of specific IgE antibodies which can cause occupational allergy even at extremely low levels of exposure (15-22 micrograms/m3). Safe use in industry demands control of the levels of exposure causing allergic diseases. Thus, the air monitoring of MTHPA is very important, and sensitive methods are required to measure low air concentrations or short-time peak exposures. This paper outlines the use of silica-gel tubes for sampling airborne MTHPA vapour, followed by analysis using gas chromatography with electron-capture detection. No breakthrough was observed at 113, 217, 673 and 830 micrograms/m3 (sampling volume 30, 60, 60 and 20 l, respectively; relative humidity 40-55%). Concentrations > 1.0 microgram/m3 could be quantified at 20-min sampling with a sampling rate of 1 l/min. The present method can also be applied to measurements of exposure to hexahydrophthalic and methylhexahydrophthalic anhydride. The risk of MTHPA exposure in two condenser plants was also assessed by determining MTHPA levels in air of the workplace. In conclusion, our method was found to be reliable and sensitive, and can be applied to the evaluation of MTHPA exposure.

Copper-Based Aquatic Algaecide Adsorption and Accumulation Kinetics: Influence of Exposure Concentration and Duration for Controlling the Cyanobacterium Lyngbya wollei.

PubMed

Bishop, West M; Lynch, Clayton L; Willis, Ben E; Cope, W Gregory

2017-09-01

Filamentous mat-forming cyanobacteria are increasingly impairing uses of freshwater resources. To effectively manage, a better understanding of control measures is needed. Copper (Cu)-based algaecide formulations are often applied to reactively control nuisance cyanobacterial blooms. This laboratory research assessed typical field exposure scenarios for the ability of Cu to partition to, and accumulate in Lyngbya wollei. Exposure factors (Cu concentration × duration) of 4, 8, 16, 24, 32 h were tested across three aqueous Cu concentrations (1, 2, 4 ppm). Results indicated that internally accumulated copper correlated with control of L. wollei, independent of adsorbed copper. L. wollei control was determined by filament viability and chlorophyll a concentrations. Similar exposure factors elicited similar internalized copper levels and consequent responses of L. wollei. Ultimately, a "concentration-exposure-time" (CET) model was created to assist water resource managers in selecting an appropriate treatment regime for a specific in-water infestation. By assessing the exposure concentration and duration required to achieve the internal threshold of copper (i.e., critical burden) that elicits control, water management objectives can be achieved while simultaneously decreasing the environmental loading of copper and potential for non-target species risks.

Terrestrial and exposure histories of Antarctic meteorites

NASA Technical Reports Server (NTRS)

Nishiizumi, K.

1986-01-01

Records of cosmogenic effects were studied in a large suite of Antarctic meteorites. The cosmogenic nuclide measurements together with cosmic ray track measurements on Antartic meteorites provide information such as exposure age, terrestrial age, size and depth in meteoroid or parent body, influx rate in the past, and pairing. The terrestrail age is the time period between the fall of the meteorite on the Earth and the present. To define terrestrial age, two or more nuclides with different half-lives and possibly noble gases are required. The cosmogenic radionuclides used are C-14, Kr-81, Cl-36, Al-26, Be-10, Mn-53, and K-40.

Regression Analysis of a Disease Onset Distribution Using Diagnosis Data

PubMed Central

Young, Jessica G.; Jewell, Nicholas P.; Samuels, Steven J.

2008-01-01

Summary We consider methods for estimating the effect of a covariate on a disease onset distribution when the observed data structure consists of right-censored data on diagnosis times and current status data on onset times amongst individuals who have not yet been diagnosed. Dunson and Baird (2001, Biometrics 57, 306–403) approached this problem using maximum likelihood, under the assumption that the ratio of the diagnosis and onset distributions is monotonic nondecreasing. As an alternative, we propose a two-step estimator, an extension of the approach of van der Laan, Jewell, and Petersen (1997, Biometrika 84, 539–554) in the single sample setting, which is computationally much simpler and requires no assumptions on this ratio. A simulation study is performed comparing estimates obtained from these two approaches, as well as that from a standard current status analysis that ignores diagnosis data. Results indicate that the Dunson and Baird estimator outperforms the two-step estimator when the monotonicity assumption holds, but the reverse is true when the assumption fails. The simple current status estimator loses only a small amount of precision in comparison to the two-step procedure but requires monitoring time information for all individuals. In the data that motivated this work, a study of uterine fibroids and chemical exposure to dioxin, the monotonicity assumption is seen to fail. Here, the two-step and current status estimators both show no significant association between the level of dioxin exposure and the hazard for onset of uterine fibroids; the two-step estimator of the relative hazard associated with increasing levels of exposure has the least estimated variance amongst the three estimators considered. PMID:17680832

Electronic Flash In Data Acquisition

NASA Astrophysics Data System (ADS)

Miller, C. E.

1982-02-01

Photographic acquisition of data often may be simplified, or the data quality improved upon by employing electronic flash sources with traditional equipment or techniques. The relatively short flash duration compared to movie camera shutters, or to the long integration time of video camera provides improved spatial resolution through blur reduction, particularly important as image movement becomes a significant fraction of film format dimension. Greater accuracy typically is achieved in velocity and acceleration determinations by using a stroboscopic light source rather than a movie camera frame-rate control as a time standard. Electrical efficiency often is an important advantage of electronic flash sources since almost any necessary light level for exposure may be produced, yet the source typically is "off" most of the time. Various synchronization techniques greatly expand the precise control of exposure. Biomechanical and sports equipment studies may involve velocities up to 200 feet-per-second, and often will have associated very rapid actions of interest. The need for brief exposures increases H.s one "ZOOMS in on the action." In golf, for example, the swing may be examined using 100 microsecond (Us) flashes at rates of 60 or 120 flashes-per-second (FPS). Accurate determination of linear and rotational velocity of the ball requires 10 Us flashes at 500-1,000 FPS, while sub-Us flashes at 20,000-50,000 FPS are required to resolve the interaction of the ball and the club, head. Some seldom. used techniques involving streak photography are described, with enhanced results obtained by combining strobe with the usual continuous light source. The combination of strobe and a fast electro-mechanical shutter is considered for Us photography under daylight conditions.

Shotgun metabolomic approach based on mass spectrometry for hepatic mitochondria of mice under arsenic exposure.

PubMed

García-Sevillano, M A; García-Barrera, T; Navarro, F; Montero-Lobato, Z; Gómez-Ariza, J L

2015-04-01

Mass spectrometry (MS)-based toxicometabolomics requires analytical approaches for obtaining unbiased metabolic profiles. The present work explores the general application of direct infusion MS using a high mass resolution analyzer (a hybrid systems triple quadrupole-time-of-flight) and a complementary gas chromatography-MS analysis to mitochondria extracts from mouse hepatic cells, emphasizing on mitochondria isolation from hepatic cells with a commercial kit, sample treatment after cell lysis, comprehensive metabolomic analysis and pattern recognition from metabolic profiles. Finally, the metabolomic platform was successfully checked on a case-study based on the exposure experiment of mice Mus musculus to inorganic arsenic during 12 days. Endogenous metabolites alterations were recognized by partial least squares-discriminant analysis. Subsequently, metabolites were identified by combining MS/MS analysis and metabolomics databases. This work reports for the first time the effects of As-exposure on hepatic mitochondria metabolic pathways based on MS, and reveals disturbances in Krebs cycle, β-oxidation pathway, amino acids degradation and perturbations in creatine levels. This non-target analysis provides extensive metabolic information from mitochondrial organelle, which could be applied to toxicology, pharmacology and clinical studies.

Assessing effects of military aircraft noise on residential property values near airbases

NASA Astrophysics Data System (ADS)

Fidell, Sanford; Tabachnick, Barbara; Silvati, Laura; Cook, Brenda

The question, 'Does military aircraft noise exposure affect residential property values in the vicinity of Air Force bases?', can be asked and answered with varying degrees of generality and tolerable errors of inference. Definitive answers are difficult to develop because the question itself may not be meaningful in some circumstances: property values are affected by many factors other than aircraft noise which can fluctuate greatly in different areas and during different time periods; credible attribution of causality for changes in property values uniquely to aircraft noise requires many costly study design measures; and prior findings suggest that if a relationship exists, it is not a large or especially strong one. Thus, evidence of a simple geographic association between aircraft noise exposure and residential property values does not provide a conclusive answer to the question. In an effort to develop more compelling evidence, the US Air Force is planning to compare historical records of sale prices of properties in areas of differential aircraft noise exposure during specific time periods with predictions of sale prices derived from a validated statistical model of residential property values.

Radiation exposure levels within timber industries in Calabar, Nigeria

PubMed Central

Inyang, S. O.; Inyang, I. S.; Egbe, N. O.

2009-01-01

The UNSCEAR (2000) observed that there could be some exposure at work which would require regulatory control but is not really considered. This study was, therefore, set up to evaluate the effective dose in timber industries in Calabar, Nigeria to determine if the evaluated dose levels could lead to any radiological health effect in the workers, and also determine if the industries require regulatory control. The gamma ray exposure at four timber industries measured using an exposure meter were converted to effective dose and compared with the public and occupational values. The evaluated effective dose values in the timber industries were below public and occupational exposure limits and may not necessarily result in any radiological health hazard. Therefore, they may not require regulatory control. PMID:20098544

In-situ hydrogen in metal determination using a minimum neutron source strength and exposure time.

PubMed

Hatem, M; Agamy, S; Khalil, M Y

2013-08-01

Water is frequently present in the environment and is a source of hydrogen that can interact with many materials. Because of its small atomic size, a hydrogen atom can easily diffuse into a host metal, and though the metal may appear unchanged for a time, the metal will eventually abruptly lose its strength and ductility. Thus, measuring the hydrogen content in metals is important in many fields, such as in the nuclear industry, in automotive and aircraft fabrication, and particularly, in offshore oil and gas fields. It has been demonstrated that the use of nuclear methods to measure the hydrogen content in metals can achieve sensitivity levels on the order of parts per million. However, the use of nuclear methods in the field has not been conducted for two reasons. The first reason is due to exposure limitations. The second reason is due to the hi-tech instruments required for better accuracy. In this work, a new method using a low-strength portable neutron source is explored in conjunction with detectors based on plastic nuclear detection films. The following are the in-situ requirements: simplicity in setup, high reliability, minimal exposure dose, and acceptable accuracy at an acceptable cost. A computer model of the experimental setup is used to reproduce the results of a proof-of-concept experiment and to predict the sensitivity levels under optimised experimental conditions. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effects of Temperature on the Termination of Egg Diapause and Post-Diapause Embryonic Development of Galeruca daurica (Coleoptera: Chrysomelidae).

PubMed

Zhou, Xiao-Rong; Gao, Jing-Chun; Pang, Bao-Ping

2016-08-01

Galeruca daurica (Joannis) is a new pest on the grasslands of Inner Mongolia, China. It is univoltine and overwinters in the egg stage. Larvae and adults feed on the foliage of Allium plants. To assess the requirements to terminate egg diapause and subsequent effects on post-diapause development rate, eggs were held at different temperature regimes. Exposure to low temperatures was required to terminate egg diapause. Prolonged exposure (2 mo vs 1 mo) to 5°C and outside ambient conditions (mean temperature: 10.5°C; range: -7.1-21.6°C) enhanced the termination of egg diapause. Prolonged exposure also reduced the time to egg hatch; e.g., eggs held for 2 mo versus 1 mo at 5°C developed more quickly when subsequently placed at warmer temperatures. Egg hatch was observed at 17, 21, 25, and 29°C, but not at 15°C. Regression analysis identified 16.2°C as the minimum temperature for post-diapause development. The temperature requirement to complete embryonic development (from diapause termination to egg hatch) was calculated to be 103.1 to 140.9 degree-days. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

[Measures of occupational exposure to time-varying low frequency magnetic fields of non-uniform spatial distribution in the light of international guidelines and electrodynamic exposure effects in the human body].

PubMed

Karpowicz, Jolanta; Zradziński, Patryk; Gryz, Krzysztof

2012-01-01

The aim of study was to analyze by computer simulations the electrodynamic effects of magnetic field (MF) on workers, to harmonize the principles of occupational hazards assessment with international guidelines. Simulations involved 50 Hz MF of various spatial distributions, representing workers' exposure in enterprises. Homogeneous models of sigma = 0.2 S/m conductivity and dimensions of body parts - palm, head and trunk - were located at 50 cm ("hand-distance") or 5 cm (adjacent) from the source (circle conductor of 20 cm or 200 cm in diameter). Parameters of magnetic flux density (B(i)) affecting the models were the exposure measures, and the induced electric field strength (E(in)) was the measure of MF exposure effects. The ratio E(in)/B(i) in the analyzed cases ranged from 2.59 to 479 (V/m)/T. The strongest correlation (p < 0.001) between B(i) and E(in) was found for parameters characterizing MF at the surface of body models. Parameters characterizing the averaged value of the field affecting models (measures of non-uniform field exposure following ICNIRP guidelines), were less correlated with exposure effects (p < 0.005). E(in)(trunk)/E(in) (palm) estimated from E(in) calculations was 3.81-4.56 but estimated from parameters representing B(i) measurement accounted for 3.96-9.74. It is justified to accept 3.96-9.74 times higher exposure to limb than that to trunk. This supports the regulation of labor law in Poland, which provides that the ceiling value for limb exposure to MF below 800 kHz is fivefold higher than that of the trunk. High uncertainty in assessing the effects of non-uniform fields exposure, resulting from a strong dependence of the E(in)/B(i) ratio on the conditions of exposure and its applied measures, requires special caution when defining the permissible MF levels and the principles of exposure assessment at workplace.

A generic multi-hazard and multi-risk framework and its application illustrated in a virtual city

NASA Astrophysics Data System (ADS)

Mignan, Arnaud; Euchner, Fabian; Wiemer, Stefan

2013-04-01

We present a generic framework to implement hazard correlations in multi-risk assessment strategies. We consider hazard interactions (process I), time-dependent vulnerability (process II) and time-dependent exposure (process III). Our approach is based on the Monte Carlo method to simulate a complex system, which is defined from assets exposed to a hazardous region. We generate 1-year time series, sampling from a stochastic set of events. Each time series corresponds to one risk scenario and the analysis of multiple time series allows for the probabilistic assessment of losses and for the recognition of more or less probable risk paths. Each sampled event is associated to a time of occurrence, a damage footprint and a loss footprint. The occurrence of an event depends on its rate, which is conditional on the occurrence of past events (process I, concept of correlation matrix). Damage depends on the hazard intensity and on the vulnerability of the asset, which is conditional on previous damage on that asset (process II). Losses are the product of damage and exposure value, this value being the original exposure minus previous losses (process III, no reconstruction considered). The Monte Carlo method allows for a straightforward implementation of uncertainties and for implementation of numerous interactions, which is otherwise challenging in an analytical multi-risk approach. We apply our framework to a synthetic data set, defined by a virtual city within a virtual region. This approach gives the opportunity to perform multi-risk analyses in a controlled environment while not requiring real data, which may be difficultly accessible or simply unavailable to the public. Based on the heuristic approach, we define a 100 by 100 km region where earthquakes, volcanic eruptions, fluvial floods, hurricanes and coastal floods can occur. All hazards are harmonized to a common format. We define a 20 by 20 km city, composed of 50,000 identical buildings with a fixed economic value. Vulnerability curves are defined in terms of mean damage ratio as a function of hazard intensity. All data are based on simple equations found in the literature and on other simplifications. We show the impact of earthquake-earthquake interaction and hurricane-storm surge coupling, as well as of time-dependent vulnerability and exposure, on aggregated loss curves. One main result is the emergence of low probability-high consequences (extreme) events when correlations are implemented. While the concept of virtual city can suggest the theoretical benefits of multi-risk assessment for decision support, identifying their real-world practicality will require the study of real test sites.

Temporal changes in artificial light exposure of marine turtle nesting areas.

PubMed

Kamrowski, Ruth L; Limpus, Col; Jones, Rhondda; Anderson, Sharolyn; Hamann, Mark

2014-08-01

Artificial light at night poses a significant threat to multiple taxa across the globe. In coastal regions, artificial lighting close to marine turtle nesting beaches is disruptive to their breeding success. Prioritizing effective management of light pollution requires an understanding of how the light exposure of nesting areas changes over time in response to changing temporal and spatial distributions of coastal development. We analyzed multitemporal, satellite night-light data, in combination with linear mixed model analysis, to determine broadscale changes in artificial light exposure at Australian marine turtle nesting areas between 1993 and 2010. We found seven marine turtle management units (MU), from five species, have experienced significant increases in light exposure over time, with flatback turtles nesting in east Australia experiencing the fastest increases. The remaining 12 MUs showed no significant change in light exposure. Unchanging MUs included those previously identified as having high exposure to light pollution (located in western Australia and southern Queensland), indicating that turtles in these areas have been potentially exposed to high light levels since at least the early nineties. At a finer geographic scale (within-MU), nine MUs contained nesting areas with significant increases in light exposure. These nesting areas predominantly occurred close to heavily industrialized coastal areas, thus emphasizing the importance of rigorous light management in industry. Within all MUs, nesting areas existed where light levels were extremely low and/or had not significantly increased since 1993. With continued coastal development, nesting females may shift to these darker/unchanging 'buffer' areas in the future. This is valuable information that informs our understanding of the capacity and resilience of marine turtles faced with coastal development: an understanding that is essential for effective marine turtle conservation. © 2013 John Wiley & Sons Ltd.

Heat exposure in cities: combining the dynamics of temperature and population

NASA Astrophysics Data System (ADS)

Hu, L.; Wilhelmi, O.; Uejio, C. K.

2017-12-01

Assessment of human exposure to extreme heat requires the distributions of temperature and population. However, both variables are dynamic, thus presenting many challenges in capturing temperature and population patterns spatially and over time in an urban context. This study aims to improve the understanding of spatiotemporal patterns of urban population exposure to heat, taking Chicago, USA as an example. We estimate the hourly, geographically variable, population distribution considering commute of workers and students in a regular weekday and analyze the diurnal air temperature patterns during different meteorological conditions from satellite observations. The results show a relatively larger temperature increase in less urbanized areas during extreme heat events (EHEs), resulting in a spatially homogeneous temperature distribution over Chicago Metropolitan area. A lake cooling effect is weaker during EHEs. Population dynamics due to daily commute determine higher population density in more urbanized areas during daytime. The city-wide analysis reveals that the exposure is more sensitive to the nighttime temperature increases, and EHEs enhance this sensitivity. The high exposure hotspots are identified at the northwest Chicago, Cicero and Oak Park areas, where the influence from Lake Michigan is weakened, while the spatial extent of high outdoor exposure areas varies diurnally. This study's findings have potential to better inform general heat mitigation strategies during hot summer months and facilitate emergency response during EHEs. Availability of remotely-sensed temperature observations as well as the workers and students commute-adjusted population data allows for the adoption of this study's methodology in other major metropolitan areas. A better understanding of space-time patterns of urban population's exposure to heat will further enable local decision makers to mitigate extreme heat health risks and develop more targeted heat preparedness and response strategies.

Occupational exposure to indoor air pollution among bakery workers in Ethiopia; A comparison of electric and biomass cookstoves.

PubMed

Downward, George S; van der Zwaag, Hugo P; Simons, Leon; Meliefste, Kees; Tefera, Yifokire; Carreon, J Rosales; Vermeulen, Roel; Smit, Lidwien A M

2018-02-01

The indoor air pollution (IAP) produced by the domestic combustion of solid fuels is responsible for up to 4 million deaths annually, especially among low and middle income countries. Occupational exposure within the food preparation industries of these nations remains underexplored. We investigated occupational exposure to the IAP produced during the commercial production of injera, a staple of the Ethiopian diet, from bakeries in Addis Ababa, Ethiopia. Measurements of PM 2.5 , black carbon (via the proxy measure PM 2.5 absorbance) and CO were collected from 30 bakeries and their employees for an average of 4-h per working day. Measurements were compared between bakeries using biomass and electric cookstoves. Further, the respiratory health data of 35 bakery employees were collected by interview-based questionnaire. Personal exposure to PM2.5 from biomass cookstoves was double that of electric cookstoves (430 μg/m3 vs. 216 μg/m3), black carbon exposure was four times higher among biomass users (67 × 10-5m-1 vs. 15 × 10-5m-1), and CO exposure was twenty times higher among biomass users (22 ppm vs. 1 ppm). Mixed effect models indicated that the number of stoves in use and additional solid fuel usage (e.g. coffee brewing) also contributed to exposure levels. These findings indicate that the use of biomass powered cookstoves during commercial injera production significantly contributes to IAP and self-reported respiratory symptoms. As injera is the staple foodstuff of Ethiopia, a widespread conversion to electric cookstoves is likely to have a significant impact. However, as high levels of IAP were also observed within the electric bakeries, further identification of pollution sources is required. Copyright © 2017 Elsevier Ltd. All rights reserved.

Causal mediation analysis for longitudinal data with exogenous exposure.

PubMed

Bind, M-A C; Vanderweele, T J; Coull, B A; Schwartz, J D

2016-01-01

Mediation analysis is a valuable approach to examine pathways in epidemiological research. Prospective cohort studies are often conducted to study biological mechanisms and often collect longitudinal measurements on each participant. Mediation formulae for longitudinal data have been developed. Here, we formalize the natural direct and indirect effects using a causal framework with potential outcomes that allows for an interaction between the exposure and the mediator. To allow different types of longitudinal measures of the mediator and outcome, we assume two generalized mixed-effects models for both the mediator and the outcome. The model for the mediator has subject-specific random intercepts and random exposure slopes for each cluster, and the outcome model has random intercepts and random slopes for the exposure, the mediator, and their interaction. We also expand our approach to settings with multiple mediators and derive the mediated effects, jointly through all mediators. Our method requires the absence of time-varying confounding with respect to the exposure and the mediator. This assumption is achieved in settings with exogenous exposure and mediator, especially when exposure and mediator are not affected by variables measured at earlier time points. We apply the methodology to data from the Normative Aging Study and estimate the direct and indirect effects, via DNA methylation, of air pollution, and temperature on intercellular adhesion molecule 1 (ICAM-1) protein levels. Our results suggest that air pollution and temperature have a direct effect on ICAM-1 protein levels (i.e. not through a change in ICAM-1 DNA methylation) and that temperature has an indirect effect via a change in ICAM-1 DNA methylation. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

High Altitude Radiations Relevant to the High Speed Civil Transport (HSCT)

NASA Technical Reports Server (NTRS)

Wilson, J. W.; Goldhagan, P.; Maiden, D. L.; Tai, H.

2004-01-01

The Langley Research Center (LaRC) performed atmospheric radiation studies under the SST development program in which important ionizing radiation components were measured and extended by calculations to develop the existing atmospheric ionizing radiation (AIR) model. In that program the measured neutron spectrum was limited to less than 10 MeV by the available 1960-1970 instrumentation. Extension of the neutron spectrum to high energies was made using the LaRC PROPER-3C monte carlo code. It was found that the atmospheric neutrons contributed about half of the dose equivalent and approximately half of the neutron contribution was from high energy neutrons above 10 MeV. Furthermore, monte carlo calculations of solar particle events showed that potential exposures as large as 10-100 mSv/hr may occur on important high latitude routes but acceptable levels of exposure could be obtained if timely descent to subsonic altitudes could be made. The principal concern was for pregnant occupants onboard the aircraft. As a result of these studies the FAA Advisory Committee on the Radiobiological Aspects of the SST recommended: 1. Crew members will have to be informed of their exposure levels 2. Maximum exposures on any flight to be limited to 5 mSv 3. Airborne radiation detection devices for total exposure and exposure rates 4. Satellite monitoring system to provide SST aircraft real-time information on atmospheric radiation levels for exposure mitigation 5. A solar forecasting system to warn flight operations of an impending solar event for flight scheduling and alert status. These recommendations are a reasonable starting point to requirements for the HSCT with some modification reflecting new standards of protection as a result of changing risk coefficients.

Postexposure bake characteristics of a chemically amplified deep-ultraviolet resist

NASA Astrophysics Data System (ADS)

Sturtevant, John L.; Holmes, Steven J.; Rabidoux, Paul A.

1992-06-01

In the processing of chemically amplified resist systems, two `dose' parameters must be considered. The exposure dose dictates the amount of photoacid generated, and the thermal dose that is administered during the post-exposure bake (PEB) governs the extent to which the resin is chemically transformed by the acid. An Arrhenius relationship exists between these two dose variables, and the magnitude of the effective activation energy determines the degree of PEB temperature control required for a particular linewidth budget. PEB characteristics are presented for a chemically amplified positive-tone DUV resist used by IBM in the manufacture of 0.5 micrometers 16 Mb DRAMs. The effect of PEB temperature and time on resist sensitivity, contrast, resolution, and process latitude is presented. The influence of exposure and thermal dose on the chemical contamination effect is also discussed.

Risk Assessment of Radiation Exposure using Molecular Biodosimetry

NASA Technical Reports Server (NTRS)

Elliott, Todd F.; George, K.; Hammond, D. K.; Cucinotta, F. A.

2007-01-01

Current cytogenetic biodosimetry methods would be difficult to adapt to spaceflight operations, because they require toxic chemicals and a substantial amount of time to perform. In addition, current biodosimetry techniques are limited to whole body doses over about 10cGy. Development of new techniques that assess radiation exposure response at the molecular level could overcome these limitations and have important implications in the advancement of biodosimetry. Recent technical advances include expression profiling at the transcript and protein level to assess multiple biomarkers of exposure, which may lead to the development of a radiation biomarker panel revealing possible fingerprints of individual radiation sensitivity. So far, many biomarkers of interest have been examined in their response to ionizing radiation, such as cytokines and members of the DNA repair pathway. New technology, such as the Luminex system can analyze many biomarkers simultaneously in one sample.

Within and between Individual Variability of Exposure to Work-Related Musculoskeletal Disorder Risk Factors.

PubMed

Zare, Mohsen; Sagot, Jean-Claude; Roquelaure, Yves

2018-05-17

Industrial companies indicate a tendency to eliminate variations in operator strategies, particularly following implementation of the lean principle. Companies believe when the operators perform the same prescribed tasks, they have to execute them in the same manner (completing the same gestures and being exposed to the same risk factors). They attempt to achieve better product quality by standardizing and reducing operational leeway. However, operators adjust and modify ways of performing tasks to balance between their abilities and the requirements of the job. This study aims to investigate the variability of exposure to physical risk factors within and between operators when executing the same prescribed tasks. The Ergonomic Standard method was used to evaluate two workstations. Seven operators were observed thirty times between repeated cycle times at those workstations. The results revealed the variability of exposure to risk factors between and within operators in the repeated execution of the same tasks. Individual characteristics and operators' strategies might generate the variability of exposure to risk factors that may be an opportunity to reduce the risks of work-related musculoskeletal disorders (WR-MSDs). However, sometimes operators' strategies may cause overexposure to risk factors; operators most often adopt such strategies to undertake their tasks while reducing the workload.

THE RELATIONSHIP BETWEEN EXPOSURE TO ALCOHOL ADVERTISING IN STORES, OWNING ALCOHOL PROMOTIONAL ITEMS, AND ADOLESCENT ALCOHOL USE

PubMed Central

HURTZ, SHANNON Q.; HENRIKSEN, LISA; WANG, YUN; FEIGHERY, ELLEN C.; FORTMANN, STEPHEN P.

2014-01-01

Aim This paper describes adolescents’ exposure to alcohol advertising in stores and to alcohol-branded promotional items and their association with self-reported drinking. Methods A cross-sectional survey was administered in non-tracked required courses to sixth, seventh, and eighth graders (n = 2125) in three California middle schools. Logistic regressions compared the odds of ever (vs. never) drinking and current (vs. ever) drinking after controlling for psychosocial and other risk factors for adolescent alcohol use. Results Two-thirds of middle school students reported at least weekly visits to liquor, convenience, or small grocery stores where alcohol advertising is widespread. Such exposure was associated with higher odds of ever drinking, but was not associated with current drinking. One-fifth of students reported owning at least one alcohol promotional item. These students were three times more likely to have ever tried drinking and 1.5 times more likely to report current drinking than students without such items. Conclusions This study provides clear evidence of an association of adolescent drinking with weekly exposure to alcohol advertising in stores and with ownership of alcohol promotional items. Given their potential influence on adolescent drinking behaviour, retail ads, and promotional items for alcohol deserve further study. PMID:17218364

Personal exposure of children and adults to airborne benzene in four French cities

NASA Astrophysics Data System (ADS)

Gonzalez-Flesca, Norbert; Nerriere, Eléna; Leclerc, Nathalie; Le Meur, Sébastien; Marfaing, Hélène; Hautemanière, Alexis; Zmirou-Navier, Denis

Atmospheric concentrations of and personal exposure to benzene have been measured in four French metropolitan areas for 210 subjects over two seasons. Half of the volunteers were 6-13-year-old children. The adult subjects were non-smokers, not occupationally exposed and they live and work in the monitored areas. Measurements were performed using diffusive samplers followed by GC-FID analysis. The average values for ambient air concentrations (μg m -3) were: Rouen: 1.5; Île de France (Paris area): 1.6; Grenoble: 2.3 and Strasbourg: 2.6, showing that benzene concentrations in the ambient air of the four cities satisfy the requirements of the European Directive 2000/69EC of the European Parliament which stipulates a limit value of 5 μg m -3. However, the 48 h exposures measured were found to be between 2.7 and 3.5 times higher than ambient air concentrations. As a consequence, 60% of the subjects investigated, including children, were exposed to concentrations higher than the ambient air limit value. This work confirms that air monitoring data collected by fixed stations should be used with caution when assessing population exposure to benzene, especially given the influence of indoor sources and other polluted microenvironments where people spend part of their time.

In Vitro Exposures in Diesel Exhaust Atmospheres: Resuspension of PM from Filters Verses Direct Deposition of PM from Air

PubMed Central

Lichtveld, Kim M.; Ebersviller, Seth M.; Sexton, Kenneth G.; Vizuete, William; Jaspers, Ilona; Jeffries, Harvey E.

2012-01-01

One of the most widely used in vitro particulate matter (PM) exposures methods is the collection of PM on filters, followed by resuspension in a liquid medium, with subsequent addition onto a cell culture. To avoid disruption of equilibria between gases and PM, we have developed a direct in vitro sampling and exposure method (DSEM) capable of PM-only exposures. We hypothesize that the separation of phases and post-treatment of filter-collected PM significantly modifies the toxicity of the PM compared to direct deposition, resulting in a distorted view of the potential PM health effects. Controlled test environments were created in a chamber that combined diesel exhaust with an urban-like mixture. The complex mixture was analyzed using both the DSEM and concurrently-collected filter samples. The DSEM showed that PM from test atmospheres produced significant inflammatory response, while the resuspension exposures at the same exposure concentration did not. Increasing the concentration of resuspended PM sixteen times was required to yield measurable IL-8 expression. Chemical analysis of the resuspended PM indicated a total absence of carbonyl compounds compared to the test atmosphere during the direct-exposures. Therefore, collection and resuspension of PM into liquid modifies its toxicity and likely leads to underestimating toxicity. PMID:22834915

Erythemal irradiances of filtered ultraviolet radiation

NASA Astrophysics Data System (ADS)

Parisi, A. V.; Wong, J. C. F.

1997-07-01

A spectrum evaluator employing four passive dosimeters has been used to evaluate the time averaged spectrum to allow calculation of the erythemal exposures resulting from the predominantly UVA component of filtered solar ultraviolet radiation. An exposure interval of approximately 20 min to autumn and spring sunshine was required for the spectrum evaluator to allow evaluation of the filtered source spectrum. For a clear spring day an erythemal exposure of 0.85 MED (minimum erythemal dose) to a horizontal plane and 0.38 MED to a vertical plane over a 6 h period was measured within a glass enclosure. For a partially cloudy day six weeks later, these were 0.89 and 0.44 MED for the horizontal and the vertical planes respectively. The ratios of the filtered to the unfiltered erythemal exposures within and outside the enclosure respectively ranged from 0.08 to 0.18 throughout the two days.

Lethal exposure: An integrated approach to pathogen transmission via environmental reservoirs

PubMed Central

Turner, Wendy C.; Kausrud, Kyrre L.; Beyer, Wolfgang; Easterday, W. Ryan; Barandongo, Zoë R.; Blaschke, Elisabeth; Cloete, Claudine C.; Lazak, Judith; Van Ert, Matthew N.; Ganz, Holly H.; Turnbull, Peter C. B.; Stenseth, Nils Chr.; Getz, Wayne M.

2016-01-01

To mitigate the effects of zoonotic diseases on human and animal populations, it is critical to understand what factors alter transmission dynamics. Here we assess the risk of exposure to lethal concentrations of the anthrax bacterium, Bacillus anthracis, for grazing animals in a natural system over time through different transmission mechanisms. We follow pathogen concentrations at anthrax carcass sites and waterholes for five years and estimate infection risk as a function of grass, soil or water intake, age of carcass sites, and the exposure required for a lethal infection. Grazing, not drinking, seems the dominant transmission route, and transmission is more probable from grazing at carcass sites 1–2 years of age. Unlike most studies of virulent pathogens that are conducted under controlled conditions for extrapolation to real situations, we evaluate exposure risk under field conditions to estimate the probability of a lethal dose, showing that not all reservoirs with detectable pathogens are significant transmission pathways. PMID:27265371

Posterior subscapular dissection: An improved approach to the brachial plexus for human anatomy students.

PubMed

Hager, Shaun; Backus, Timothy Charles; Futterman, Bennett; Solounias, Nikos; Mihlbachler, Matthew C

2014-05-01

Students of human anatomy are required to understand the brachial plexus, from the proximal roots extending from spinal nerves C5 through T1, to the distal-most branches that innervate the shoulder and upper limb. However, in human cadaver dissection labs, students are often instructed to dissect the brachial plexus using an antero-axillary approach that incompletely exposes the brachial plexus. This approach readily exposes the distal segments of the brachial plexus but exposure of proximal and posterior segments require extensive dissection of neck and shoulder structures. Therefore, the proximal and posterior segments of the brachial plexus, including the roots, trunks, divisions, posterior cord and proximally branching peripheral nerves often remain unobserved during study of the cadaveric shoulder and brachial plexus. Here we introduce a subscapular approach that exposes the entire brachial plexus, with minimal amount of dissection or destruction of surrounding structures. Lateral retraction of the scapula reveals the entire length of the brachial plexus in the subscapular space, exposing the brachial plexus roots and other proximal segments. Combining the subscapular approach with the traditional antero-axillary approach allows students to observe the cadaveric brachial plexus in its entirety. Exposure of the brachial dissection in the subscapular space requires little time and is easily incorporated into a preexisting anatomy lab curriculum without scheduling additional time for dissection. Copyright © 2014 Elsevier GmbH. All rights reserved.

Examining Exposure Assessment in Shift Work Research: A Study on Depression Among Nurses.

PubMed

Hall, Amy L; Franche, Renée-Louise; Koehoorn, Mieke

2018-02-13

Coarse exposure assessment and assignment is a common issue facing epidemiological studies of shift work. Such measures ignore a number of exposure characteristics that may impact on health, increasing the likelihood of biased effect estimates and masked exposure-response relationships. To demonstrate the impacts of exposure assessment precision in shift work research, this study investigated relationships between work schedule and depression in a large survey of Canadian nurses. The Canadian 2005 National Survey of the Work and Health of Nurses provided the analytic sample (n = 11450). Relationships between work schedule and depression were assessed using logistic regression models with high, moderate, and low-precision exposure groupings. The high-precision grouping described shift timing and rotation frequency, the moderate-precision grouping described shift timing, and the low-precision grouping described the presence/absence of shift work. Final model estimates were adjusted for the potential confounding effects of demographic and work variables, and bootstrap weights were used to generate sampling variances that accounted for the survey sample design. The high-precision exposure grouping model showed the strongest relationships between work schedule and depression, with increased odds ratios [ORs] for rapidly rotating (OR = 1.51, 95% confidence interval [CI] = 0.91-2.51) and undefined rotating (OR = 1.67, 95% CI = 0.92-3.02) shift workers, and a decreased OR for depression in slow rotating (OR = 0.79, 95% CI = 0.57-1.08) shift workers. For the low- and moderate-precision exposure grouping models, weak relationships were observed for all work schedule categories (OR range 0.95 to 0.99). Findings from this study support the need to consider and collect the data required for precise and conceptually driven exposure assessment and assignment in future studies of shift work and health. Further research into the effects of shift rotation frequency on depression is also recommended. © The Author(s) 2018. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Occupational health and safety assessment of exposure to jet fuel combustion products in air medical transport.

PubMed

MacDonald, Russell D; Thomas, Laura; Rusk, Frederick C; Marques, Shauna D; McGuire, Dan

2010-01-01

Transport medicine personnel are potentially exposed to jet fuel combustion products. Setting-specific data are required to determine whether this poses a risk. This study assessed exposure to jet fuel combustion products, compared various engine ignition scenarios, and determined methods to minimize exposure. The Beechcraft King Air B200 turboprop aircraft equipped with twin turbine engines, using a kerosene-based jet fuel (Jet A-1), was used to measure products of combustion during boarding, engine startup, and flight in three separate engine start scenarios ("shielded": internal engine start, door closed; "exposed": ground power unit start, door open; and "minimized": ground power unit right engine start, door open). Real-time continuous monitoring equipment was used for oxygen, carbon dioxide, carbon monoxide, nitrogen dioxide, hydrogen sulfide, sulfur dioxide, volatile organic compounds, and particulate matter. Integrated methods were used for aldehydes, polycyclic aromatic hydrocarbons, volatile organic compounds, and aliphatic hydrocarbons. Samples were taken in the paramedic breathing zone for approximately 60 minutes, starting just before the paramedics boarded the aircraft. Data were compared against regulated time-weighted exposure thresholds to determine the presence of potentially harmful products of combustion. Polycyclic aromatic hydrocarbons, aldehydes, volatile organic compounds, and aliphatic hydrocarbons were found at very low concentrations or beneath the limits of detection. There were significant differences in exposures to particulates, carbon monoxide, and total volatile organic compound between the "exposed" and "minimized" scenarios. Elevated concentrations of carbon monoxide and total volatile organic compounds were present during the ground power unit-assisted dual-engine start. There were no appreciable exposures during the "minimized" or "shielded" scenarios. Air medical personnel exposures to jet fuel combustion products were generally low and did not exceed established U.S. or Canadian health and safety exposure limits. Avoidance of ground power unit-assisted dual-engine starts and closing the hangar door prior to start minimize or eliminate the occupational exposure.

Knowledge of outdoor workers on the effects of natural UV radiation and methods of protection against exposure.

PubMed

Hault, K; Rönsch, H; Beissert, S; Knuschke, P; Bauer, A

2016-04-01

The most important but influenceable risk factor in the development of skin cancer is the unprotected exposure to solar ultraviolet (UV) radiation. In order to assure adequate and effective protection against UV exposure, a level of knowledge about solar radiation and its effects is required. The objective of this study was to assess the knowledge of workers in outdoor professions on the effects of natural UV radiation and methods of protection against exposure. Forty outdoor workers were given a standardized questionnaire designed to ascertain their level of knowledge. The majority of participants knew exposure to solar radiation can be detrimental depending on exposure time. Eighty-three percentage recognized that people working regularly in an outdoor environment may be at risk due to high exposure. Long-sleeved clothing plus headgear and sunscreen containing sun-protecting substances were deemed adequate methods of protection by 83% and 85% respectively. Seventy percentage of the outdoor workers were familiar with the definition of the sun protection factor (SPF), yet only 25% correctly identified the amount of sunscreen needed to achieve the SPF as indicated on the product. A mere 8% of participants knew that symptoms of a sunburn first became apparent 3 h after sun exposure and only 18% were able to accurately gauge the amount of time they could spend in the sun before developing one. Although 30% had heard of the ultraviolet index (UVI), only 13% understood that protecting your skin using additional measures is recommended as of UVI 3. Overall, 30% of the outdoor workers thought themselves sufficiently protected against the harmful effects of the sun. While the participants of this study had a basic fundamental understanding of the effects of solar radiation and methods of protection against exposure, there remains an urgent need for further clarification across all demographic groups. © 2016 European Academy of Dermatology and Venereology.

LENS (lithography enhancement toward nano scale): a European project to support double exposure and double patterning technology development

NASA Astrophysics Data System (ADS)

Cantu, Pietro; Baldi, Livio; Piacentini, Paolo; Sytsma, Joost; Le Gratiet, Bertrand; Gaugiran, Stéphanie; Wong, Patrick; Miyashita, Hiroyuki; Atzei, Luisa R.; Buch, Xavier; Verkleij, Dick; Toublan, Olivier; Perez-Murano, Francesco; Mecerreyes, David

2010-04-01

In 2009 a new European initiative on Double Patterning and Double Exposure lithography process development was started in the framework of the ENIAC Joint Undertaking. The project, named LENS (Lithography Enhancement Towards Nano Scale), involves twelve companies from five different European Countries (Italy, Netherlands, France, Belgium Spain; includes: IC makers (Numonyx and STMicroelectronics), a group of equipment and materials companies (ASML, Lam Research srl, JSR, FEI), a mask maker (Dai Nippon Photomask Europe), an EDA company (Mentor Graphics) and four research and development institutes (CEA-Leti, IMEC, Centro Nacional de Microelectrónica, CIDETEC). The LENS project aims to develop and integrate the overall infrastructure required to reach patterning resolutions required by 32nm and 22nm technology nodes through the double patterning and pitch doubling technologies on existing conventional immersion exposure tools, with the purpose to allow the timely development of 32nm and 22nm technology nodes for memories and logic devices, providing a safe alternative to EUV, Higher Refraction Index Fluids Immersion Lithography and maskless lithography, which appear to be still far from maturity. The project will cover the whole lithography supply chain including design, masks, materials, exposure tools, process integration, metrology and its final objective is the demonstration of 22nm node patterning on available 1.35 NA immersion tools on high complexity mask set.

Totally laparoscopic aortic surgery: comparison of the apron and retrocolic techniques in a porcine model.

PubMed

Huynh, Hai; Elkouri, Stephane; Beaudoin, Nathalie; Bruneau, Luc; Guimond, Cathie; Daniel, Véronique; Blair, Jean-François

2007-01-01

This study evaluated the learning curve for a second-year general surgery resident and compared 2 totally laparoscopic aortic surgery techniques in 10 pigs: the transretroperitoneal apron approach and the transperitoneal retrocolic approach. Five end points were compared: success rate, percentage of conversion, time required, laparoscopic anastomosis quality, and learning curve. The first 3 interventions required an open conversion. The last 7 were done without complications. Mean dissection time was significantly higher with the apron approach compared with the retrocolic approach. The total times for operation, clamping, and arteriotomy time were similar. All laparoscopic anastomoses were patent and without stenosis. The initial learning curve for laparoscopic anastomosis was relatively short for a second-year surgery resident. Both techniques resulted in satisfactory exposure of the aorta and similar mean operative and clamping time. Training on an ex vivo laparoscopic box trainer and on an animal model seems to be complementary to decrease laparoscopic anastomosis completion time.

Estimating the time and temperature relationship for causation of deep-partial thickness skin burns.

PubMed

Abraham, John P; Plourde, Brian; Vallez, Lauren; Stark, John; Diller, Kenneth R

2015-12-01

The objective of this study is to develop and present a simple procedure for evaluating the temperature and exposure-time conditions that lead to causation of a deep-partial thickness burn and the effect that the immediate post-burn thermal environment can have on the process. A computational model has been designed and applied to predict the time required for skin burns to reach a deep-partial thickness level of injury. The model includes multiple tissue layers including the epidermis, dermis, hypodermis, and subcutaneous tissue. Simulated exposure temperatures ranged from 62.8 to 87.8°C (145-190°F). Two scenarios were investigated. The first and worst case scenario was a direct exposure to water (characterized by a large convection coefficient) with the clothing left on the skin following the exposure. A second case consisted of a scald insult followed immediately by the skin being washed with cool water (20°C). For both cases, an Arrhenius injury model was applied whereby the extent and depth of injury were calculated and compared for the different post-burn treatments. In addition, injury values were compared with experiment data from the literature to assess verification of the numerical methodology. It was found that the clinical observations of injury extent agreed with the calculated values. Furthermore, inundation with cool water decreased skin temperatures more quickly than the clothing insulating case and led to a modest decrease in the burn extent. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Dose — response relationship between noise exposure and the risk of occupational injury

PubMed Central

Yoon, Jin-Ha; Hong, Jeong-Suk; Roh, Jaehoon; Kim, Chi-Nyon; Won, Jong-Uk

2015-01-01

Many workers worldwide experience fatality and disability caused by occupational injuries. This study examined the relationship between noise exposure and occupational injuries at factories in Korea. A total of 1790 factories located in northern Gyeonggi Province, Korea was evaluated. The time-weighted average levels of dust and noise exposure were taken from Workplace Exposure Assessment data. Apart occupational injuries, sports events, traffic accidents, and other accidents occurring outside workplaces were excluded. The incidences of occupational injury in each factory were calculated by data from the Korea Workers’ Compensation and Welfare Services. Workplaces were classified according to the incidence of any occupational injuries (incident or nonincident workplaces, respectively). Workplace dust exposure was classified as <1 or ≥1 mg/m3, and noise exposure as <80, 80-89, or >90 dB. Workplaces with high noise exposure were significantly associated with being incident workplaces, whereas workplaces with high dust exposure were not. The odds ratios (95% confidence intervals) derived from a logistic regression model were 1.68 (1.27-2.24) and 3.42 (2.26-5.17) at 80-89 dB and ≥90 dB versus <80 dB. These associations remained significant when in a separate analysis according to high or low dust exposure level. Noise exposure increases the risk of occupational injury in the workplace. Furthermore, the risk of occupational injury increases with noise exposure level in a dose-response relationship. Therefore, strategies for reducing noise exposure level are required to decrease the risk of occupational injury. PMID:25599757

Changes in blood manganese concentration and MRI t1 relaxation time during 180 days of stainless steel welding-fume exposure in cynomolgus monkeys.

PubMed

Sung, Jae Hyuck; Kim, Choong Yong; Yang, Seoung Oh; Khang, Hyun Soo; Cheong, Hae Kwan; Lee, Jong Seong; Song, Chang-Woo; Park, Jung Duck; Han, Jeong Hee; Chung, Yong Hyun; Choi, Byung Sun; Kwon, Il Hoon; Cho, Myung Haeng; Yu, Il Je

2007-01-01

Welders are at risk of being exposed to high concentrations of welding fumes and developing pneumoconiosis or other welding-fume exposure-related diseases. Among such diseases, manganism resulting from welding-fume exposure remains a controversial issue, as although the movement of manganese into specific brain regions has been established, the similar movement of manganese presented with other metals, such as welding fumes, has not been clearly demonstrated as being similar to that of manganese alone. Meanwhile, the competition between Mn and iron for iron transporters, such as transferrin and DMT-1, to the brain has also been implicated in the welding-fume exposure. Thus, the increased signal intensities in the basal ganglia, including the globus pallidus and subcortical frontal white matter, based on T1-weighted magnetic resonances in welders, require further examination as regards the correspondence with an increased manganese concentration. Accordingly, to investigate the movement of manganese after welding-fume exposure, 6 cynomolgus monkeys were acclimated for 1 mo and assigned to 3 dose groups: unexposed, low dose of (total suspended particulate [TSP] 31 mg/m3, 0.9 mg/m3 of Mn), and high dose of total suspended particulate (62 mg/m3 TSP, 1.95 mg/m3 of Mn). The primates were exposed to manual metal-arc stainless steel (MMA-SS) welding fumes for 2 h/day in an inhalation chamber system equipped with an automatic fume generator for 6 mo. Magnetic resonance imaging (MRI) studies of the basal ganglia were conducted before the initiation of exposure and thereafter every month. During the exposure, the blood chemistry was monitored every 2 wk and the concentrations of metal components in the blood were measured every 2 wk and compared with ambient manganese concentrations. The manganese concentrations in the blood did not show any significant increase until after 2 mo of exposure, and then reached a plateau after 90 days of exposure, showing that an exposure period of at least 60 days was required to build up the blood Mn concentration. Furthermore, as the blood Mn concentration continued to build, a continued decrease in the MRI T1 relaxation time in the basal ganglia was also detected. These data suggested that prolonged inhalation of welding fumes induces a high MRI T1 signal intensity with an elevation of the blood manganese level. The presence of a certain amount of iron or other metals, such as Cr and Ni, in the inhaled welding fumes via inhalation was not found to have a significant effect on the uptake of Mn into the brain or the induction of a high MRI T1 signal intensity.

Sunlight Exposure and Vitamin D Status in Breastfed Infants.

PubMed

Meena, Pinky; Dabas, Aashima; Shah, Dheeraj; Malhotra, Rajeev Kumar; Madhu, S V; Gupta, Piyush

2017-02-15

To correlate the sunlight exposure in first 6 months to vitamin D status at 6 months of age in predominantly breastfed infants; and to quantify the sunlight exposure required to achieve serum 25(OH)D level >20 ng/mL, by 6 months of age. Design: Prospective cohort. Tertiary-care hospital predominantly catering to urban poor population in Delhi. 132 healthy infants, delivered at term, and predominantly breastfed were enrolled at 6-8 weeks of age. Of these, 100 infants were available for final evaluation at 6 months of age (mean (SD) follow-up: 126 (17) days). Baseline maternal vitamin D (serum 25(OH)D) levels were obtained at enrolment. The mothers were asked to maintain a daily record of duration of sunlight exposure, timing of exposure, and body surface area exposed, for the infant, on a pre-designed proforma, till the child was 6 months of age. Infant's serum 25(OH)D was measured at 6 months of age. Cumulative Sun Index was calculated as a composite measure of overall duration/time/body surface area exposed to sunlight; and correlated with the infant serum 25(OH)D after adjusting for baseline maternal serum 25(OH)D levels, season of exposure, and skin color of the infant. Sun index for exposure in morning (before 10 am) and afternoon (10 am-3 pm) were also correlated to vitamin D status. Of 100 mother-infant pairs completing the study, 90 mothers had vitamin D deficiency (serum 25(OH)D <12 ng/mL). The median duration of exposure of infants to sunlight was 17 min per week, on 6% of body surface area. Vitamin D levels of 67 (67%) infants at 6 months were less than 12 ng/mL and another 23% had insufficient levels (12-20 ng/mL). Cumulative sun index correlated positively to infant's serum 25(OH)D level at 6 months of age (r= 0.461, P<0.001). Increment in afternoon sun index by 1 unit increased the serum 25(OH)D level by 1.07 ng/mL (95% CI 0.37, 1.78; P= 0.003). A minimum 30 minute weekly afternoon sunlight exposure, between 10 am and 3 pm, over 40% body area (infant clothed in diapers, in prone position) for at least 16 weeks, was estimated requirement to achieve sufficient vitamin D levels (>20 ng/mL) by 6 months of age. There is a significant positive correlation between afternoon sunlight exposure and infant's vitamin D levels, independent of maternal vitamin D status. Randomized controlled trials are suggested to explore the effectiveness of this simple intervention to prevent or treat vitamin D deficiency in children.

UV-B light contributes directly to the synthesis of chiloglottone floral volatiles

PubMed Central

Amarasinghe, Ranamalie; Poldy, Jacqueline; Matsuba, Yuki; Barrow, Russell A.; Hemmi, Jan M.; Pichersky, Eran; Peakall, Rod

2015-01-01

Background and Aims Australian sexually deceptive Chiloglottis orchids attract their specific male wasp pollinators by means of 2,5-dialkylcyclohexane-1,3-diones or ‘chiloglottones’, representing a newly discovered class of volatiles with unique structures. This study investigated the hypothesis that UV-B light at low intensities is directly required for chiloglottone biosynthesis in Chiloglottis trapeziformis. Methods Chiloglottone production occurs only in specific tissue (the callus) of the labellum. Cut buds and flowers, and whole plants with buds and flowers, sourced from the field, were kept in a growth chamber and interactions between growth stage of the flowers and duration and intensity of UV-B exposure on chiloglottone production were studied. The effects of the protein synthesis inhibitor cycloheximide were also examined. Key Results Chiloglottone was not present in buds, but was detected in buds that were manually opened and then exposed to sunlight, or artificial UV-B light for ≥5 min. Spectrophotometry revealed that the sepals and petals blocked UV-B light from reaching the labellum inside the bud. Rates of chiloglottone production increased with developmental stage, increasing exposure time and increasing UV-B irradiance intensity. Cycloheximide did not inhibit the initial production of chiloglottone within 5 min of UV-B exposure. However, inhibition of chiloglottone production by cycloheximide occurred over 2 h of UV-B exposure, indicating a requirement for de novo protein synthesis to sustain chiloglottone production under UV-B. Conclusions The sepals and petals of Chiloglottis orchids strongly block UV-B wavelengths of light, preventing chiloglottone production inside the bud. While initiation of chiloglottone biosynthesis requires only UV-B light, sustained chiloglottone biosynthesis requires both UV-B and de novo protein biosynthesis. The internal amounts of chiloglottone in a flower reflect the interplay between developmental stage, duration and intensity of UV-B exposure, de novo protein synthesis, and feedback loops linked to the starting amount of chiloglottone. It is concluded that UV-B light contributes directly to chiloglottone biosynthesis. These findings suggest an entirely new and unexpected biochemical reaction that might also occur in taxa other than these orchids. PMID:25649114

Epidemiologic tools to study the influence of environmental factors on fecundity and pregnancy-related outcomes.

PubMed

Slama, Rémy; Ballester, Ferran; Casas, Maribel; Cordier, Sylvaine; Eggesbø, Merete; Iniguez, Carmen; Nieuwenhuijsen, Mark; Philippat, Claire; Rey, Sylvie; Vandentorren, Stéphanie; Vrijheid, Martine

2014-01-01

Adverse pregnancy outcomes entail a large health burden for the mother and offspring; a part of it might be avoided by better understanding the role of environmental factors in their etiology. Our aims were to review the assessment tools to characterize fecundity troubles and pregnancy-related outcomes in human populations and their sensitivity to environmental factors. For each outcome, we reviewed the possible study designs, main sources of bias, and their suggested cures. In terms of study design, for most pregnancy outcomes, cohorts with recruitment early during or even before pregnancy allow efficient characterization of pregnancy-related events, time-varying confounders, and in utero exposures that may impact birth outcomes and child health. Studies on congenital anomalies require specific designs, assessment of anomalies in medical pregnancy terminations, and, for congenital anomalies diagnosed postnatally, follow-up during several months after birth. Statistical analyses should take into account environmental exposures during the relevant time windows; survival models are an appropriate approach for fecundity, fetal loss, and gestational duration/preterm delivery. Analysis of gestational duration could distinguish pregnancies according to delivery induction (and possibly pregnancy-related conditions). In conclusion, careful design and analysis are required to better characterize environmental effects on human reproduction.

First impressions: making up your mind after a 100-ms exposure to a face.

PubMed

Willis, Janine; Todorov, Alexander

2006-07-01

People often draw trait inferences from the facial appearance of other people. We investigated the minimal conditions under which people make such inferences. In five experiments, each focusing on a specific trait judgment, we manipulated the exposure time of unfamiliar faces. Judgments made after a 100-ms exposure correlated highly with judgments made in the absence of time constraints, suggesting that this exposure time was sufficient for participants to form an impression. In fact, for all judgments-attractiveness, likeability, trustworthiness, competence, and aggressiveness-increased exposure time did not significantly increase the correlations. When exposure time increased from 100 to 500 ms, participants' judgments became more negative, response times for judgments decreased, and confidence in judgments increased. When exposure time increased from 500 to 1,000 ms, trait judgments and response times did not change significantly (with one exception), but confidence increased for some of the judgments; this result suggests that additional time may simply boost confidence in judgments. However, increased exposure time led to more differentiated person impressions.

Radiation exposure and performance of multiple burn LEO-GEO orbit transfer trajectories

NASA Technical Reports Server (NTRS)

Gorland, S. H.

1985-01-01

Many potential strategies exist for the transfer of spacecraft from low Earth orbit (LEO) to geosynchronous (GEO) orbit. One strategy has generally been utilized, that being a single impulsive burn at perigee and a GEO insertion burn at apogee. Multiple burn strategies were discussed for orbit transfer vehicles (OTVs) but the transfer times and radiation exposure, particularly for potentially manned missions, were used as arguments against those options. Quantitative results concerning the trip time and radiation encountered by multiple burn orbit transfer missions in order to establish the feasibility of manned missions, the vulnerability of electronics, and the shielding requirements are presented. The performance of these multiple burn missions is quantified in terms of the payload and propellant variances from the minimum energy mission transfer. The missions analyzed varied from one to eight perigee burns and ranged from a high thrust, 1 g acceleration, cryogenic hydrogen-oxygen chemical prpulsion system to a continuous burn, 0.001 g acceleration, hydrogen fueled resistojet propulsion system with a trip time of 60 days.

Biomarkers of oxidative stress study V: ozone exposure of rats and its effect on lipids, proteins, and DNA in plasma and urine.

PubMed

Kadiiska, Maria B; Basu, Samar; Brot, Nathan; Cooper, Christopher; Saari Csallany, A; Davies, Michael J; George, Magdalene M; Murray, Dennis M; Jackson Roberts, L; Shigenaga, Mark K; Sohal, Rajindar S; Stocker, Roland; Van Thiel, David H; Wiswedel, Ingrid; Hatch, Gary E; Mason, Ronald P

2013-08-01

Ozone exposure effect on free radical-catalyzed oxidation products of lipids, proteins, and DNA in the plasma and urine of rats was studied as a continuation of the international Biomarker of Oxidative Stress Study (BOSS) sponsored by NIEHS/NIH. The goal was to identify a biomarker for ozone-induced oxidative stress and to assess whether inconsistent results often reported in the literature might be due to the limitations of the available methods for measuring the various types of oxidative products. The time- and dose-dependent effects of ozone exposure on rat plasma lipid hydroperoxides, malondialdehyde, F2-isoprostanes, protein carbonyls, methionine oxidation, and tyrosine- and phenylalanine oxidation products, as well as urinary malondialdehyde and F2-isoprostanes were investigated with various techniques. The criterion used to recognize a marker in the model of ozone exposure was that a significant effect could be identified and measured in a biological fluid seen at both doses at more than one time point. No statistically significant differences between the experimental and the control groups at either ozone dose and time point studied could be identified in this study. Tissue samples were not included. Despite all the work accomplished in the BOSS study of ozone, no available product of oxidation in biological fluid has yet met the required criteria of being a biomarker. The current negative findings as a consequence of ozone exposure are of great importance, because they document that in complex systems, as the present in vivo experiment, the assays used may not provide meaningful data of ozone oxidation, especially in human studies. Published by Elsevier Inc.

Biomarkers of Oxidative Stress Study V: Ozone exposure of rats and its effect on lipids, proteins and DNA in plasma and urine

PubMed Central

Kadiiska, Maria B.; Basu, Samar; Brot, Nathan; Cooper, Christopher; Csallany, A. Saari; Davies, Michael J.; George, Magdalene M.; Murray, Dennis M.; Roberts, L. Jackson; Shigenaga, Mark K.; Sohal, Rajindar S.; Stocker, Roland; Van Thiel, David H.; Wiswedel, Ingrid; Hatch, Gary E.; Mason, Ronald P.

2014-01-01

Ozone exposure effect on free radical-catalyzed oxidation products of lipids, proteins and DNA in the plasma and urine of rats was studied as a continuation of the international Biomarker of Oxidative Stress Study (BOSS) sponsored by NIEHS/NIH. The goal was to identify a biomarker for ozone-induced oxidative stress and to assess whether inconsistent results often reported in the literature might be due to the limitations of the available methods for measuring the various types of oxidative products. The time and dose-dependent effects of ozone exposure on rat plasma lipid hydroperoxides, malondialdehyde, F2-isoprostanes, protein carbonyls, methionine oxidation, tyrosine- and phenylalanine oxidation products, as well as urinary malondialdehyde and F2-isoprostanes were investigated with various techniques. The criterion used to recognize a marker in the model of ozone exposure was that a significant effect could be identified and measured in a biological fluid seen at both doses at more than one time point. No statistically significant differences between the experimental and control groups at either ozone dose and time point studied could be identified in this study. Tissue samples were not included. Despite all the work accomplished in the BOSS study of ozone, no available product of oxidation in biological fluid has yet met the required criteria of being a biomarker. The current negative findings as a consequence of ozone exposure are of great importance, because they document that in complex systems, as the present in vivo experiment, the assays used may not provide meaningful data of ozone oxidation, especially in human studies. PMID:23608465

Real-Time Aircraft Cosmic Ray Radiation Exposure Predictions from the NAIRAS Model

NASA Astrophysics Data System (ADS)

Mertens, C. J.; Tobiska, W.; Kress, B. T.; Xu, X.

2012-12-01

The Nowcast of Atmospheric Ionizing Radiation for Aviation Safety (NAIRAS) is a prototype operational model for predicting commercial aircraft radiation exposure from galactic and solar cosmic rays. NAIRAS predictions are currently streaming live from the project's public website, and the exposure rate nowcast is also available on the SpaceWx smartphone app for iPhone, IPad, and Android. Cosmic rays are the primary source of human exposure to high linear energy transfer radiation at aircraft altitudes, which increases the risk of cancer and other adverse health effects. Thus, the NAIRAS model addresses an important national need with broad societal, public health and economic benefits. There is also interest in extending NAIRAS to the LEO environment to address radiation hazard issues for the emerging commercial spaceflight industry. The processes responsible for the variability in the solar wind, interplanetary magnetic field, solar energetic particle spectrum, and the dynamical response of the magnetosphere to these space environment inputs, strongly influence the composition and energy distribution of the atmospheric ionizing radiation field. Real-time observations are required at a variety of locations within the geospace environment. The NAIRAS model is driven by real-time input data from ground-, atmospheric-, and space-based platforms. During the development of the NAIRAS model, new science questions and observational data gaps were identified that must be addressed in order to obtain a more reliable and robust operational model of atmospheric radiation exposure. The focus of this talk is to present the current capabilities of the NAIRAS model, discuss future developments in aviation radiation modeling and instrumentation, and propose strategies and methodologies of bridging known gaps in current modeling and observational capabilities.

A passive ozone sampler based on a reaction with iodide.

PubMed

Yanagisawa, Y

1994-02-01

A new passive sampler for ozone and its simple analytical system have been developed. Because it is small and sensitive, the sampler can be used for determining personal exposures to ozone and oxidants and for multilocation measurements. The sampler consists of an electrode, a spacer, and several layers of membrane filters and Teflon meshes. The electrode is a carbon paper disk coated with nylon-6 polymer and potassium iodide. The membrane filters are used to remove interferences. A sampling rate of ozone is controlled by the spacer and Teflon meshes. Iodine is liberated by an oxidation reaction of potassium iodide with ozone. The iodine is stabilized by forming a charge transfer complex with nylon-6 and is accumulated in the nylon-6 layer. The amount of iodine, which is proportional to the level of ozone exposure, is quantified by constant current coulometry. The discharge time of a galvanic battery is measured using the electrode as a positive electrode and a zinc plate as a counter electrode. A time-weighted average concentration of ozone is derived from the discharge time after exposing the electrode to ozone. The effects of various environmental conditions on the sampler's performance were investigated. The results indicated that the sampler showed a linear response to ozone exposure up to 1,450 parts per billion for every hour of use (ppb.hour). The minimum detectable exposure was about 400 ppb.hour. The effects of surface wind velocity, temperature, and humidity were small. However, a relative humidity below 20% resulted in an underestimation of the ozone concentration. Because the electrode requires no pretreatment and the analytical method is very simple, this method is suitable for large-scale studies of personal exposures to ozone and oxidants using multilocation measurements.

The effect of low-intensity pulsed ultrasound on wound healing using scratch assay in epithelial cells.

PubMed

Iwanabe, Yujiro; Masaki, Chihiro; Tamura, Akiko; Tsuka, Shintaro; Mukaibo, Taro; Kondo, Yusuke; Hosokawa, Ryuji

2016-10-01

Low-intensity pulsed ultrasound (LIPUS) is widely used in medical fields because it shortens the time required for biologic wound healing in fracture treatment. Also, in dental fields, LIPUS should be effectively employed for implant treatment. However, most of the relevant reports have been published on its effects on bone formation around implants, and the effects of LIPUS on soft tissue healing remain unclear. In the present study, we examined the effects of LIPUS on soft tissue healing using gingival epithelial cells. Gingival epithelial cells were cultured on a dish, followed by LIPUS exposure at a frequency of 3MHz for 15min. The cells were counted with a hemocytometer, and a scratch assay was conducted by measuring the closing area of the scratch wound using a microscope. Following LIPUS exposure, total RNA was collected for microarray analysis. In addition, real-time PCR was performed to examine the mRNA expression level of integrin α6β4. Furthermore, total protein was collected to examine the protein expression level of integrin α6β4 by western blotting. The cell count and scratch assay demonstrated that LIPUS exposure promoted cell proliferation and scratch-wound closure. Microarray analysis demonstrated the increased expression levels of adhesion-related genes, including integrin. Real-time PCR analysis demonstrated that LIPUS exposure significantly up-regulated the mRNA expression level of integrin α6β4. Western blotting showed intense staining of integrin α6β4. LIPUS exposure promotes wound closure in the scratch assay and up-regulates the expression level of integrin α6β4 as compared with the control. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Is Exposure Necessary? A Randomized Clinical Trial of Interpersonal Psychotherapy for PTSD

PubMed Central

Markowitz, John C.; Petkova, Eva; Neria, Yuval; Van Meter, Page E.; Zhao, Yihong; Hembree, Elizabeth; Lovell, Karina; Biyanova, Tatyana; Marshall, Randall D.

2015-01-01

Background Exposure to trauma reminders has been considered imperative in psychotherapy for posttraumatic stress disorder (PTSD). No treatment benefits all patients, however. We tested Interpersonal Psychotherapy, which has demonstrated antidepressant efficacy and showed promise in pilot PTSD research, as a non-exposure-based, non-cognitive behavioral PTSD treatment. Methods A randomized, fourteen-week trial compared Interpersonal Psychotherapy; Prolonged Exposure, an exposure-based exemplar; and Relaxation Therapy, an active control psychotherapy. Subjects were 110 unmedicated patients having DSM-IV chronic PTSD and Clinician-Administered PTSD Scale (CAPS) score >50. Randomization stratified for comorbid major depression. We hypothesized Interpersonal Psychotherapy would be no more than minimally inferior (CAPS difference <12.5 points) to Prolonged Exposure. Results All therapies had large within-group pre/post effect sizes (d=1.32–1.88). Response rates (>30% CAPS improvement) were: Interpersonal Psychotherapy 63%, Prolonged Exposure 47%, Relaxation Therapy 38% (n.s.). Interpersonal psychotherapy and Prolonged Exposure CAPS outcome differed by 5.5 points (n.s.); the null hypothesis of more than minimal Interpersonal Psychotherapy inferiority was rejected (p=0.035). Patients with comorbid major depression dropped out from Prolonged Exposure nine times more than non-depressed Prolonged Exposure patients. Interpersonal Psychotherapy and Prolonged Exposure improved quality of life and social functioning more than Relaxation Therapy. Conclusions This first controlled study of individual Interpersonal Psychotherapy for PTSD demonstrated non-inferiority to the “gold standard” PTSD treatment. Interpersonal Psychotherapy had (non-significantly) lower attrition and higher response rates than Prolonged Exposure. Contradicting a widespread clinical belief, PTSD treatment may not require cognitive behavioral exposure to trauma reminders. Moreover, as differential therapeutics, patients with comorbid major depression may fare better in Interpersonal Psychotherapy than Prolonged Exposure. PMID:25677355

Human exposure to power frequency magnetic fields up to 7.6 mT: An integrated EEG/fMRI study.

PubMed

Modolo, Julien; Thomas, Alex W; Legros, Alexandre

2017-09-01

We assessed the effects of power-line frequency (60 Hz in North America) magnetic fields (MF) in humans using simultaneous electroencephalography (EEG) and functional magnetic resonance imaging (fMRI). Twenty-five participants were enrolled in a pseudo-double-blind experiment involving "real" or "sham" exposure to sinusoidal 60 Hz MF exposures delivered using the gradient coil of an MRI scanner following two conditions: (i) 10 s exposures at 3 mT (10 repetitions); (ii) 2 s exposures at 7.6 mT (100 repetitions). Occipital EEG spectral power was computed in the alpha range (8-12 Hz, reportedly the most sensitive to MF exposure in the literature) with/without exposure. Brain functional activation was studied using fMRI blood oxygen level-dependent (BOLD, inversely correlated with EEG alpha power) maps. No significant effects were detected on occipital EEG alpha power during or post-exposure for any exposure condition. Consistent with EEG results, no effects were observed on fMRI BOLD maps in any brain region. Our results suggest that acute exposure (2-10 s) to 60 Hz MF from 3 to 7.6 mT (30,000 to 76,000 times higher than average public exposure levels for 60 Hz MF) does not induce detectable changes in EEG or BOLD signals. Combined with previous findings in which effects were observed on the BOLD signal after 1 h exposure to 3 mT, 60 Hz MF, this suggests that MF exposure in the low mT range (<10 mT) might require prolonged durations of exposure to induce detectable effects. Bioelectromagnetics. 38:425-435, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Channel-Island Connectivity Affects Water Exposure Time Distributions in a Coastal River Delta

NASA Astrophysics Data System (ADS)

Hiatt, Matthew; Castañeda-Moya, Edward; Twilley, Robert; Hodges, Ben R.; Passalacqua, Paola

2018-03-01

The exposure time is a water transport time scale defined as the cumulative amount of time a water parcel spends in the domain of interest regardless of the number of excursions from the domain. Transport time scales are often used to characterize the nutrient removal potential of aquatic systems, but exposure time distribution estimates are scarce for deltaic systems. Here we analyze the controls on exposure time distributions using a hydrodynamic model in two domains: the Wax Lake delta in Louisiana, USA, and an idealized channel-island complex. In particular, we study the effects of river discharge, vegetation, network geometry, and tides and use a simple model for the fractional removal of nitrate. In both domains, we find that channel-island hydrological connectivity significantly affects exposure time distributions and nitrate removal. The relative contributions of the island and channel portions of the delta to the overall exposure time distribution are controlled by island vegetation roughness and network geometry. Tides have a limited effect on the system's exposure time distribution but can introduce significant spatial variability in local exposure times. The median exposure time for the WLD model is 10 h under the conditions tested and water transport within the islands contributes to 37-50% of the network-scale exposure time distribution and 52-73% of the modeled nitrate removal, indicating that islands may account for the majority of nitrate removal in river deltas.

Context memory formation requires activity-dependent protein degradation in the hippocampus.

PubMed

Cullen, Patrick K; Ferrara, Nicole C; Pullins, Shane E; Helmstetter, Fred J

2017-11-01

Numerous studies have indicated that the consolidation of contextual fear memories supported by an aversive outcome like footshock requires de novo protein synthesis as well as protein degradation mediated by the ubiquitin-proteasome system (UPS). Context memory formed in the absence of an aversive stimulus by simple exposure to a novel environment requires de novo protein synthesis in both the dorsal (dHPC) and ventral (vHPC) hippocampus. However, the role of UPS-mediated protein degradation in the consolidation of context memory in the absence of a strong aversive stimulus has not been investigated. In the present study, we used the context preexposure facilitation effect (CPFE) procedure, which allows for the dissociation of context learning from context-shock learning, to investigate the role of activity-dependent protein degradation in the dHPC and vHPC during the formation of a context memory. We report that blocking protein degradation with the proteasome inhibitor clasto-lactacystin β-lactone (βLac) or blocking protein synthesis with anisomycin (ANI) immediately after context preexposure significantly impaired context memory formation. Additionally, we examined 20S proteasome activity at different time points following context exposure and saw that the activity of proteasomes in the dHPC increases immediately after stimulus exposure while the vHPC exhibits a biphasic pattern of proteolytic activity. Taken together, these data suggest that the requirement of increased proteolysis during memory consolidation is not driven by processes triggered by the strong aversive outcome (i.e., shock) normally used to support fear conditioning. © 2017 Cullen et al.; Published by Cold Spring Harbor Laboratory Press.

Time-integrated directional detection of dark matter

NASA Astrophysics Data System (ADS)

O'Hare, Ciaran A. J.; Kavanagh, Bradley J.; Green, Anne M.

2017-10-01

The analysis of signals in directional dark matter (DM) detectors typically assumes that the directions of nuclear recoils can be measured in the Galactic rest frame. However, this is not possible with all directional detection technologies. In nuclear emulsions, for example, the recoil events must be detected and measured after the exposure time of the experiment. Unless the entire detector is mounted and rotated with the sidereal day, the recoils cannot be reoriented in the Galactic rest frame. We examine the effect of this "time integration" on the primary goals of directional detection, namely: (1) confirming that the recoils are anisotropic; (2) measuring the median recoil direction to confirm their Galactic origin; and (3) probing below the neutrino floor. We show that after time integration the DM recoil distribution retains a preferred direction and is distinct from that of Solar neutrino-induced recoils. Many of the advantages of directional detection are therefore preserved and it is not crucial to mount and rotate the detector. Rejecting isotropic backgrounds requires a factor of 2 more signal events compared with an experiment with event time information, whereas a factor of 1.5-3 more events are needed to measure a median direction in agreement with the expectation for DM. We also find that there is still effectively no neutrino floor in a time-integrated directional experiment. However to reach a cross section an order of magnitude below the floor, a factor of ˜8 larger exposure is required than with a conventional directional experiment. We also examine how the sensitivity is affected for detectors with only 2D recoil track readout, and/or no head-tail measurement. As for non-time-integrated experiments, 2D readout is not a major disadvantage, though a lack of head-tail sensitivity is.

Mechanism of the Antimicrobial Action of Pyrithione: Effects on Membrane Transport, ATP Levels, and Protein Synthesis

PubMed Central

Chandler, Carol J.; Segel, Irwin H.

1978-01-01

Pyrithione is a general inhibitor of membrane transport processes in fungi. A brief preincubation of Penicillium mycelia with pyrithione resulted in a marked decrease in the activities of a variety of independently regulated transport systems, including those for inorganic sulfate, inorganic phosphate, methylamine (actually, the NH4+ permease), choline-O-sulfate, glucose, l-methionine (a specific system), and several hydrophobic l-α-amino acids (the general amino acid permease). The degree of inhibition at any fixed pyrithione concentration and exposure time increased as the pH of the incubation medium was decreased. This result strongly suggests that the active species is the un-ionized molecule and that pyrithione acts by collapsing a transmembrane ΔpH driving force. The degree of transport inhibition caused by a given concentration of pyrithione increased with increasing time of exposure to the inhibitor. However, exposure time and pyrithione concentration were not reciprocally related. At “low” pyrithione concentrations, transport inhibition plateaued at some finite value. This observation suggests that the fungi can detoxify low levels of the inhibitor. The concentration of pyrithione required for a given degree of growth inhibition increased as the experimental mycelial density increased. This phenomenon was consistent with the suggestion that the fungi are capable of inactivating pyrithione. PMID:28693

Stability of human sera collected for clinical chemistry determinations

NASA Technical Reports Server (NTRS)

Townsend, F. M.

1969-01-01

Problems in collecting and shipping human sera for clinical chemical analyses affect their stability and require proper preservation methods. It is shown that glutamic pyruvate transaminase is very unstable and serum cannot be shipped unless the shipping time is carefully controlled and is less than two days under refrigeration. A limit of four days handling time and avoidance of light exposure are required in bilirubin testing of specimens. Addition of 11 mg of a 10 to 1 mixture of finely powdered sodium fluoride and thymol per ml of blood to preserve specimen stability en route to a central laboratory prevents glycolysis. A citrate buffer at pH 6.2 in serum to be tested for alkaline phosphatase lessens decline at room temperature.

The Arrival of Robotics in Spine Surgery: A Review of the Literature.

PubMed

Ghasem, Alexander; Sharma, Akhil; Greif, Dylan N; Alam, Milad; Maaieh, Motasem Al

2018-04-18

Systematic Review. The authors aim to review comparative outcome measures between robotic and free-hand spine surgical procedures including: accuracy of spinal instrumentation, radiation exposure, operative time, hospital stay, and complication rates. Misplacement of pedicle screws in conventional open as well as minimally invasive surgical procedures has prompted the need for innovation and allowed the emergence of robotics in spine surgery. Prior to incorporation of robotic surgery in routine practice, demonstration of improved instrumentation accuracy, operative efficiency, and patient safety is required. A systematic search of the PubMed, OVID-MEDLINE, and Cochrane databases was performed for papers relevant to robotic assistance of pedicle screw placement. Inclusion criteria were constituted by English written randomized control trials, prospective and retrospective cohort studies involving robotic instrumentation in the spine. Following abstract, title, and full-text review, 32 articles were selected for study inclusion. Intrapedicular accuracy in screw placement and subsequent complications were at least comparable if not superior in the robotic surgery cohort. There is evidence supporting that total operative time is prolonged in robot assisted surgery compared to conventional free-hand. Radiation exposure appeared to be variable between studies; radiation time did decrease in the robot arm as the total number of robotic cases ascended, suggesting a learning curve effect. Multi-level procedures appeared to tend toward earlier discharge in patients undergoing robotic spine surgery. The implementation of robotic technology for pedicle screw placement yields an acceptable level of accuracy on a highly consistent basis. Surgeons should remain vigilant about confirmation of robotic assisted screw trajectory, as drilling pathways have been shown to be altered by soft tissue pressures, forceful surgical application, and bony surface skiving. However, the effective consequence of robot-assistance on radiation exposure, length of stay, and operative time remains unclear and requires meticulous examination in future studies. 4.

Summary of ionizing radiation analysis on the Long Duration Exposure Facility

NASA Technical Reports Server (NTRS)

Parnell, T. A.

1992-01-01

The ionizing radiation measurements flown on the Long Duration Exposure Facility (LDEF) were contained in 15 experiments which utilized passive detectors to pursue objectives in astrophysics and to measure the radiation environment and dosimetric quantities. The spacecraft structure became sufficiently radioactive to permit additional important studies. The induced activity allows extensive radiation mapping in the structure, and independent comparison with experiment dosimetric techniques, and significant studies of secondary effects. The long exposure time, attitude stability, and number and types of measurements produced a unique and critical set of data for low Earth orbit that will not be duplicated for more than a decade. The data allow an unprecedented test, and improvement if required, of models of the radiation environment and the radiation transport methods that are used to calculate the internal radiation and its effects in spacecraft. Results of measurements in the experiments, as well as from radioactivity in the structure, have clearly shown effects from the directional properties of the radiation environment, and progress was made in the dosimetric mapping of LDEF. These measurements have already influenced some Space Station Freedom design requirements. Preliminary results from experiments, reported at this symposium and in earlier papers, show that the 5.8 years exposure considerably enhanced the scientific return of the radiation measurements. The early results give confidence that the experiments will make significant advances in the knowledge of ultra heavy cosmic rays, anomalous cosmic rays, and heavy ions trapped in the radiation belts. Unexpected phenomena were observed, which require explanation. These include stopping iron group ions between the energy ranges anticipated for anomalous and galactic cosmic rays in the LDEF orbit. A surprising concentration of the Be-7 nuclide was discovered on the 'front' surface of LDEF, apparently transported up from the stratosphere with exceptional efficiency.

Modeling adverse environmental impacts on the reproductive system.

PubMed

Sussman, N B; Mazumdar, S; Mattison, D R

1999-03-01

When priority topics are being established for the study of women's health, it is generally agreed that one important area on which to focus research is reproduction. For example, increasing attention has been directed to environmental exposures that disrupt the endocrine system and alter reproduction. These concerns also suggest the need to give greater attention to the use of animal toxicologic testing to draw inferences about human reproductive risks. Successful reproduction requires multiple simultaneous and sequential processes in both the male and female, and the effect of toxicity on reproduction-related processes is time dependent. Currently, however, the risk assessment approach does not allow for the use of multiple processes or for considering the reproductive process response as a function of time. We discuss several issues in modeling exposure effects on reproductive function for risk assessment and present an overview of approaches for reproductive risk assessment. Recommendations are provided for an effective animal study design for determining reproductive risk that addresses optimization of the duration of dosing, observation of the effects of exposure on validated biomarkers, analysis of several biomarkers for complete characterization of the exposure on the underlying biologic processes, the need for longitudinally observed exposure effects, and a procedure for estimating human reproductive risk from the animal findings. An approach to characterizing reproductive toxicity to estimate the increased fertility risks in a dibromochloropropane (DBCP)-exposed human population is illustrated, using several reproductive biomarkers simultaneously from a longitudinal rabbit inhalation study of DBCP and an interspecies extrapolation method.

Multi-GPU Accelerated Admittance Method for High-Resolution Human Exposure Evaluation.

PubMed

Xiong, Zubiao; Feng, Shi; Kautz, Richard; Chandra, Sandeep; Altunyurt, Nevin; Chen, Ji

2015-12-01

A multi-graphics processing unit (GPU) accelerated admittance method solver is presented for solving the induced electric field in high-resolution anatomical models of human body when exposed to external low-frequency magnetic fields. In the solver, the anatomical model is discretized as a three-dimensional network of admittances. The conjugate orthogonal conjugate gradient (COCG) iterative algorithm is employed to take advantage of the symmetric property of the complex-valued linear system of equations. Compared against the widely used biconjugate gradient stabilized method, the COCG algorithm can reduce the solving time by 3.5 times and reduce the storage requirement by about 40%. The iterative algorithm is then accelerated further by using multiple NVIDIA GPUs. The computations and data transfers between GPUs are overlapped in time by using asynchronous concurrent execution design. The communication overhead is well hidden so that the acceleration is nearly linear with the number of GPU cards. Numerical examples show that our GPU implementation running on four NVIDIA Tesla K20c cards can reach 90 times faster than the CPU implementation running on eight CPU cores (two Intel Xeon E5-2603 processors). The implemented solver is able to solve large dimensional problems efficiently. A whole adult body discretized in 1-mm resolution can be solved in just several minutes. The high efficiency achieved makes it practical to investigate human exposure involving a large number of cases with a high resolution that meets the requirements of international dosimetry guidelines.

Fast exposure time decision in multi-exposure HDR imaging

NASA Astrophysics Data System (ADS)

Piao, Yongjie; Jin, Guang

2012-10-01

Currently available imaging and display system exists the problem of insufficient dynamic range, and the system cannot restore all the information for an high dynamic range (HDR) scene. The number of low dynamic range(LDR) image samples and fastness of exposure time decision impacts the real-time performance of the system dramatically. In order to realize a real-time HDR video acquisition system, this paper proposed a fast and robust method for exposure time selection in under and over exposure area which is based on system response function. The method utilized the monotony of the imaging system. According to this characteristic the exposure time is adjusted to an initial value to make the median value of the image equals to the middle value of the system output range; then adjust the exposure time to make the pixel value on two sides of histogram be the middle value of the system output range. Thus three low dynamic range images are acquired. Experiments show that the proposed method for adjusting the initial exposure time can converge in two iterations which is more fast and stable than average gray control method. As to the exposure time adjusting in under and over exposed area, the proposed method can use the dynamic range of the system more efficiently than fixed exposure time method.

Proficiency or Exposure? Rethinking Foreign Language Requirements within College Curriculum Reviews

ERIC Educational Resources Information Center

Rios-Font, Wadda C.

2017-01-01

This article analyzes the growing trend among US higher education institutions to replace four-semester, proficiency-oriented language requirement models with shorter exposure-oriented sequences frequently restricting exemptions and aimed at bringing languages into distribution requirement structures. By contrasting the history, strengths, and…

The reduction of retinal autofluorescence caused by light exposure.

PubMed

Morgan, Jessica I W; Hunter, Jennifer J; Merigan, William H; Williams, David R

2009-12-01

A prior study showed that long exposure to 568-nm light at levels below the maximum permissible exposure safety limit produces retinal damage preceded by a transient reduction in the autofluorescence of retinal pigment epithelial (RPE) cells in vivo. The present study shows how the effects of exposure power and duration combine to produce this autofluorescence reduction and find the minimum exposure causing a detectable autofluorescence reduction. Macaque retinas were imaged using a fluorescence adaptive optics scanning laser ophthalmoscope to resolve individual RPE cells in vivo. The retina was exposed to 568-nm light over a square subtending 0.5 degrees with energies ranging from 1 to 788 J/cm(2), where power and duration were independently varied. In vivo exposures of 5 J/cm(2) and higher caused an immediate decrease in autofluorescence followed by either full autofluorescence recovery (exposures or= 247 J/cm(2)). No significant autofluorescence reduction was observed for exposures of 2 J/cm(2) and lower. Reciprocity of exposure power and duration held for the exposures tested, implying that the total energy delivered to the retina, rather than its distribution in time, determines the amount of autofluorescence reduction. That reciprocity held is consistent with a photochemical origin, which may or may not cause retinal degeneration. The implementation of safe methods for delivering light to the retina requires a better understanding of the mechanism causing autofluorescence reduction. Finally, RPE imaging was demonstrated using light levels that do not cause a detectable reduction in autofluorescence.

The Reduction of Retinal Autofluorescence Caused by Light Exposure

PubMed Central

Morgan, Jessica I. W.; Hunter, Jennifer J.; Merigan, William H.; Williams, David R.

2009-01-01

Purpose We have previously shown that long exposure to 568 nm light at levels below the maximum permissible exposure safety limit produces retinal damage preceded by a transient reduction in the autofluorescence of retinal pigment epithelial (RPE) cells in vivo. Here, we determine how the effects of exposure power and duration combine to produce this autofluorescence reduction and find the minimum exposure causing a detectable autofluorescence reduction. Methods Macaque retinas were imaged using a fluorescence adaptive optics scanning laser ophthalmoscope to resolve individual RPE cells in vivo. The retina was exposed to 568 nm light over a square subtending 0.5° with energies ranging from 1 J/cm2 to 788 J/cm2, where power and duration were independently varied. Results In vivo exposures of 5 J/cm2 and higher caused an immediate decrease in autofluorescence followed by either full autofluorescence recovery (exposures ≤ 210 J/cm2) or permanent RPE cell damage (exposures ≥ 247 J/cm2). No significant autofluorescence reduction was observed for exposures of 2 J/cm2 and lower. Reciprocity of exposure power and duration held for the exposures tested, implying that the total energy delivered to the retina, rather than its distribution in time, determines the amount of autofluorescence reduction. Conclusions That reciprocity holds is consistent with a photochemical origin, which may or may not cause retinal degeneration. The implementation of safe methods for delivering light to the retina requires a better understanding of the mechanism causing autofluorescence reduction. Finally, RPE imaging was demonstrated using light levels that do not cause a detectable reduction in autofluorescence. PMID:19628734

Type I interleukin-1 receptor is required for pulmonary responses to subacute ozone exposure in mice.

PubMed

Johnston, Richard A; Mizgerd, Joseph P; Flynt, Lesley; Quinton, Lee J; Williams, Erin S; Shore, Stephanie A

2007-10-01

Interleukin (IL)-1, a proinflammatory cytokine, is expressed in the lung after ozone (O(3)) exposure. IL-1 mediates its effects through the type I IL-1 receptor (IL-1RI), the only signaling receptor for both IL-1alpha and IL-1beta. The purpose of this study was to determine the role of IL-1RI in pulmonary responses to O(3.) To that end, wild-type, C57BL/6 (IL-1RI(+/+)) mice and IL-1RI-deficient (IL-1RI(-/-)) mice were exposed to O(3) either subacutely (0.3 ppm for 72 h) or acutely (2 ppm for 3 h). Subacute O(3) exposure increased bronchoalveolar lavage fluid (BALF) protein, interferon-gamma-inducible protein (IP)-10, soluble tumor necrosis factor receptor 1 (sTNFR1), and neutrophils in IL-1RI(+/+) and IL-1RI(-/-) mice. With the exception of IP-10, all outcome indicators were reduced in IL-1RI(-/-) mice. Furthermore, subacute O(3) exposure increased IL-6 mRNA expression in IL-1RI(+/+), but not IL-1RI(-/-) mice. Acute (2 ppm) O(3) exposure increased BALF protein, IL-6, eotaxin, KC, macrophage inflammatory protein (MIP)-2, IP-10, monocyte chemotactic protein-1, sTNFR1, neutrophils, and epithelial cells in IL-1RI(+/+) and IL-1RI(-/-) mice. For IL-6, eotaxin, MIP-2, and sTNFR1, there were small but significant reductions of these outcome indicators in IL-1RI(-/-) versus IL-1RI(+/+) mice at 6 hours after exposure, but not at other time points, whereas other outcome indicators were unaffected by IL-1RI deficiency. These results suggest that IL-1RI is required for O(3)-induced pulmonary inflammation during subacute O(3) exposure, but plays a more minor role during acute O(3) exposure. In addition, these results suggest that the induction of IL-6 via IL-1RI may be important in mediating the effects of O(3) during subacute exposure.

Validation of a semi-quantitative job exposure matrix at a Söderberg aluminum smelter.

PubMed

Friesen, M C; Demers, P A; Spinelli, J J; Le, N D

2003-08-01

We tested the validity of a job exposure matrix (JEM) for coal tar pitch volatiles (CTPV) at a Söderberg aluminum smelter. The JEM had been developed by a committee of company hygienists and union representatives for an earlier study of cancer incidence and mortality. Our aim was to test the validity and reliability of the expert-based assignments. Personal CTPV exposure measurements (n = 1879) overlapped 11 yr of the JEM. The arithmetic mean was calculated for 35 job/time period combinations (35% of the exposed work history), categorized using the original exposure intervals, and compared with the expert-based assignments. The expert-based and the measurement-based exposure assignments were only moderately correlated (Spearman's rho = 0.42; weighted kappa = 0.39, CI 0.10-0.69). Only 40% of the expert-based medium category assignments were correctly assigned, with better agreement in the low (84%) and high (100%) categories. Pot operation jobs exhibited better agreement (rho = 0.60) than the maintenance and pot shell repair jobs (rho = 0.25). The mid-point value of the medium category was overestimated by 0.3 mg/m(3). The expert-based exposure assignments may be improved by better characterizing the transitions between exposure categories, by accounting for exposure differences between pot lines and by re-examining the category mid-point values used in calculating the cumulative exposure. Lack of historical exposure measurements often requires reliance on expert knowledge to assess exposure levels. Validating the experts' estimates against available exposure measurements may help to identify weaknesses in the exposure assessment where improvements may be possible, as was shown here.

LONGITUDINAL COHORT METHODS STUDIES

EPA Science Inventory

Accurate exposure classification tools are required to link exposure with health effects in epidemiological studies. Exposure classification for occupational studies is relatively easy compared to predicting residential childhood exposures. Recent NHEXAS (Maryland) study articl...

The Effect of a Mechanical Arm System on Portable Grinder Vibration Emissions.

PubMed

McDowell, Thomas W; Welcome, Daniel E; Warren, Christopher; Xu, Xueyan S; Dong, Ren G

2016-04-01

Mechanical arm systems are commonly used to support powered hand tools to alleviate ergonomic stressors related to the development of workplace musculoskeletal disorders. However, the use of these systems can increase exposure times to other potentially harmful agents such as hand-transmitted vibration. To examine how these tool support systems affect tool vibration, the primary objectives of this study were to characterize the vibration emissions of typical portable pneumatic grinders used for surface grinding with and without a mechanical arm support system at a workplace and to estimate the potential risk of the increased vibration exposure time afforded by the use of these mechanical arm systems. This study also developed a laboratory-based simulated grinding task based on the ISO 28927-1 (2009) standard for assessing grinder vibrations; the simulated grinding vibrations were compared with those measured during actual workplace grinder operations. The results of this study demonstrate that use of the mechanical arm may provide a health benefit by reducing the forces required to lift and maneuver the tools and by decreasing hand-transmitted vibration exposure. However, the arm does not substantially change the basic characteristics of grinder vibration spectra. The mechanical arm reduced the average frequency-weighted acceleration by about 24% in the workplace and by about 7% in the laboratory. Because use of the mechanical arm system can increase daily time-on-task by 50% or more, the use of such systems may actually increase daily time-weighted hand-transmitted vibration exposures in some cases. The laboratory acceleration measurements were substantially lower than the workplace measurements, and the laboratory tool rankings based on acceleration were considerably different than those from the workplace. Thus, it is doubtful that ISO 28927-1 is useful for estimating workplace grinder vibration exposures or for predicting workplace grinder acceleration rank orders. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2015.

The Effect of a Mechanical Arm System on Portable Grinder Vibration Emissions

PubMed Central

McDowell, Thomas W.; Welcome, Daniel E.; Warren, Christopher; Xu, Xueyan S.; Dong, Ren G.

2016-01-01

Mechanical arm systems are commonly used to support powered hand tools to alleviate ergonomic stressors related to the development of workplace musculoskeletal disorders. However, the use of these systems can increase exposure times to other potentially harmful agents such as hand-transmitted vibration. To examine how these tool support systems affect tool vibration, the primary objectives of this study were to characterize the vibration emissions of typical portable pneumatic grinders used for surface grinding with and without a mechanical arm support system at a workplace and to estimate the potential risk of the increased vibration exposure time afforded by the use of these mechanical arm systems. This study also developed a laboratory-based simulated grinding task based on the ISO 28927-1 (2009) standard for assessing grinder vibrations; the simulated grinding vibrations were compared with those measured during actual workplace grinder operations. The results of this study demonstrate that use of the mechanical arm may provide a health benefit by reducing the forces required to lift and maneuver the tools and by decreasing hand-transmitted vibration exposure. However, the arm does not substantially change the basic characteristics of grinder vibration spectra. The mechanical arm reduced the average frequency-weighted acceleration by about 24% in the workplace and by about 7% in the laboratory. Because use of the mechanical arm system can increase daily time-on-task by 50% or more, the use of such systems may actually increase daily time-weighted hand-transmitted vibration exposures in some cases. The laboratory acceleration measurements were substantially lower than the workplace measurements, and the laboratory tool rankings based on acceleration were considerably different than those from the workplace. Thus, it is doubtful that ISO 28927-1 is useful for estimating workplace grinder vibration exposures or for predicting workplace grinder acceleration rank orders. PMID:26628522

DEARS particulate matter relationships for personal, indoor, outdoor, and central site settings for a general population

NASA Astrophysics Data System (ADS)

Rodes, Charles E.; Lawless, Phil A.; Thornburg, Jonathan W.; Williams, Ronald W.; Croghan, Carry W.

2010-04-01

This analysis provides the initial summary of PM 2.5 mass concentrations relationships for all seasons and participants for a general population in the Detroit Exposure and Aerosol Research Study (DEARS). The summary presented highlights the utility of the new methodologies applied, in addition to summarizing the particulate matter (PM) data. Results include the requirement to adjust the exposure data for monitor wearing compliance and measured environmental tobacco smoke (ETS) levels, even though the study design specified a non-smoking household. A 40% wearing compliance acceptance level was suggested as necessary to balance minimizing exposure misclassification (from poor compliance) and having sufficient data to conduct robust statistical analyses. An ETS threshold level equivalent to adding more than 1.5 μg m -3 to the collected sample was found to be necessary to detect changes in the personal exposure factor ( Fpex). It is not completely clear why such a large threshold level was necessary. Statistically significant spatial PM 2.5 gradients were identified in three of the six DEARS neighborhoods in Wayne County. These were expected, given the number of strong, localized PM sources in the Detroit (Michigan) metro area. Some residential outdoor bias levels compared with the central site at Allen Park exceeded 15%. After adjusting for ETS biases, the outdoor contributions to the personal exposure were typically larger by factors from 1.75 to 2.2 compared with those of the non-outdoor sources. The outdoor contribution was larger in the summer than in the winter, which is consistent with the fractions of time spent outdoors in the summer vs. the winter (6.7% vs. 1.1% of the time). Mean personal PM 2.5 cloud levels for the general population DEARS cohort ranged from 1.5 to 3.8 (after ETS adjustment) and were comparable to those reported previously. The personal exposure collections indoors were typically at least 13 times greater than those contributed outdoors.

Satellite-based PM concentrations and their application to COPD in Cleveland, OH

PubMed Central

Kumar, Naresh; Liang, Dong; Comellas, Alejandro; Chu, Allen D.; Abrams, Thad

2014-01-01

A hybrid approach is proposed to estimate exposure to fine particulate matter (PM2.5) at a given location and time. This approach builds on satellite-based aerosol optical depth (AOD), air pollution data from sparsely distributed Environmental Protection Agency (EPA) sites and local time–space Kriging, an optimal interpolation technique. Given the daily global coverage of AOD data, we can develop daily estimate of air quality at any given location and time. This can assure unprecedented spatial coverage, needed for air quality surveillance and management and epidemiological studies. In this paper, we developed an empirical relationship between the 2 km AOD and PM2.5 data from EPA sites. Extrapolating this relationship to the study domain resulted in 2.3 million predictions of PM2.5 between 2000 and 2009 in Cleveland Metropolitan Statistical Area (MSA). We have developed local time–space Kriging to compute exposure at a given location and time using the predicted PM2.5. Daily estimates of PM2.5 were developed for Cleveland MSA between 2000 and 2009 at 2.5 km spatial resolution; 1.7 million (~79.8%) of 2.13 million predictions required for multiyear and geographic domain were robust. In the epidemiological application of the hybrid approach, admissions for an acute exacerbation of chronic obstructive pulmonary disease (AECOPD) was examined with respect to time–space lagged PM2.5 exposure. Our analysis suggests that the risk of AECOPD increases 2.3% with a unit increase in PM2.5 exposure within 9 days and 0.05° (~5 km) distance lags. In the aggregated analysis, the exposed groups (who experienced exposure to PM2.5 >15.4 μg/m3) were 54% more likely to be admitted for AECOPD than the reference group. The hybrid approach offers greater spatiotemporal coverage and reliable characterization of ambient concentration than conventional in situ monitoring-based approaches. Thus, this approach can potentially reduce exposure misclassification errors in the conventional air pollution epidemiology studies. PMID:24045428

A Framework for Widespread Replication of a Highly Spatially Resolved Childhood Lead Exposure Risk Model

PubMed Central

Kim, Dohyeong; Galeano, M. Alicia Overstreet; Hull, Andrew; Miranda, Marie Lynn

2008-01-01

Background Preventive approaches to childhood lead poisoning are critical for addressing this longstanding environmental health concern. Moreover, increasing evidence of cognitive effects of blood lead levels < 10 μg/dL highlights the need for improved exposure prevention interventions. Objectives Geographic information system–based childhood lead exposure risk models, especially if executed at highly resolved spatial scales, can help identify children most at risk of lead exposure, as well as prioritize and direct housing and health-protective intervention programs. However, developing highly resolved spatial data requires labor-and time-intensive geocoding and analytical processes. In this study we evaluated the benefit of increased effort spent geocoding in terms of improved performance of lead exposure risk models. Methods We constructed three childhood lead exposure risk models based on established methods but using different levels of geocoded data from blood lead surveillance, county tax assessors, and the 2000 U.S. Census for 18 counties in North Carolina. We used the results to predict lead exposure risk levels mapped at the individual tax parcel unit. Results The models performed well enough to identify high-risk areas for targeted intervention, even with a relatively low level of effort on geocoding. Conclusions This study demonstrates the feasibility of widespread replication of highly spatially resolved childhood lead exposure risk models. The models guide resource-constrained local health and housing departments and community-based organizations on how best to expend their efforts in preventing and mitigating lead exposure risk in their communities. PMID:19079729

Introduction: circadian rhythm and its disruption: impact on reproductive function.

PubMed

Casper, Robert F; Gladanac, Bojana

2014-08-01

Almost all forms of life have predictable daily or circadian rhythms in molecular, endocrine, and behavioral functions. In mammals, a central pacemaker located in the suprachiasmatic nuclei coordinates the timing of these rhythms. Daily light exposure that affects the retina of the eye directly influences this area, which is required to align endogenous processes to the appropriate time of day. The present "Views and Reviews" articles discuss the influence of circadian rhythms, especially nightly secretion of melatonin, on reproductive function and parturition. In addition, an examination is made of problems that arise from recurrent circadian rhythm disruption associated with changes in light exposure patterns common to modern day society. Finally, a possible solution to prevent disruptions in circadian phase markers by filtering out short wavelengths from nocturnal light is reviewed. Copyright © 2014 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Using Theory to Design Evaluations of Communication Campaigns: The Case of the National Youth Anti-Drug Media Campaign.

PubMed

Hornik, Robert C; Yanovitzky, Itzhak

2003-05-01

We present a general theory about how campaigns can have effects and suggest that the evaluation of communication campaigns must be driven by a theory of effects. The National Youth Anti-Drug Media Campaign illustrates both the theory of campaign effects and implications that theory has for the evaluation design. Often models of effect assume that individual exposure affects cognitions that continue to affect behavior over a short term. Contrarily, effects may operate through social or institutional paths as well as through individual learning, require substantial levels of exposure achieved through multiple channels over time, take time to accumulate detectable change, and affect some members of the audience but not others. Responsive evaluations will choose appropriate units of analysis and comparison groups, data collection schedules sensitive to lagged effects, samples able to detect subgroup effects, and analytic strategies consistent with the theory of effects that guides the campaign.

40 CFR 270.10 - General application requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... associated with transportation to or from the unit; (ii) The potential pathways of human exposure to... resulting from both direct and indirect exposure pathways. The Director may also require a permittee or...

Rapid time-resolved diffraction studies of protein structures using synchrotron radiation

NASA Astrophysics Data System (ADS)

Bartunik, Hans D.; Bartunik, Lesley J.

1992-07-01

The crystal structure of intermediate states in biological reactions of proteins of multi-protein complexes may be studied by time-resolved X-ray diffraction techniques which make use of the high spectral brilliance, continuous wavelength distribution and pulsed time structure of synchrotron radiation. Laue diffraction methods provide a means of investigating intermediate structures with lifetimes in the millisecond time range at presently operational facilities. Third-generation storage rings which are under construction may permit one to reach a time resolution of one microsecond for non-cyclic and one nanosecond for cyclic reactions. The number of individual exposures required for exploring reciprocal space and hence the total time scale strongly depend on the lattice order that may be affected, e.g., by conformational changes. Time-resolved experiments require high population of a specific intermediate which has to be homogeneous over the crystal volume. A number of external excitation techniques have been developed including in situ liberation of active metabolites by laser pulse photolysis of photolabile inactive precursors. First applications to crystal structure analysis of catalytic intermediates of enzymes demonstrate the potential of time-resolved protein crystallography.

Paper-based microfluidics with an erodible polymeric bridge giving controlled release and timed flow shutoff.

PubMed

Jahanshahi-Anbuhi, Sana; Henry, Aleah; Leung, Vincent; Sicard, Clémence; Pennings, Kevin; Pelton, Robert; Brennan, John D; Filipe, Carlos D M

2014-01-07

Water soluble pullulan films were formatted into paper-based microfluidic devices, serving as a controlled time shutoff valve. The utility of the valve was demonstrated by a one-step, fully automatic implementation of a complex pesticide assay requiring timed, sequential exposure of an immobilized enzyme layer to separate liquid streams. Pullulan film dissolution and the capillary wicking of aqueous solutions through the device were measured and modeled providing valve design criteria. The films dissolve mainly by surface erosion, meaning the film thickness mainly controls the shutoff time. This method can also provide time-dependent sequential release of reagents without compromising the simplicity and low cost of paper-based devices.

Schooling Increases Risk Exposure for Fish Navigating Past Artificial Barriers

PubMed Central

Lemasson, Bertrand H.; Haefner, James W.; Bowen, Mark D.

2014-01-01

Artificial barriers have become ubiquitous features in freshwater ecosystems and they can significantly impact a region's biodiversity. Assessing the risk faced by fish forced to navigate their way around artificial barriers is largely based on assays of individual swimming behavior. However, social interactions can significantly influence fish movement patterns and alter their risk exposure. Using an experimental flume, we assessed the effects of social interactions on the amount of time required for juvenile palmetto bass (Morone chrysops × M. saxatilis) to navigate downstream past an artificial barrier. Fish were released either individually or in groups into the flume using flow conditions that approached the limit of their expected swimming stamina. We compared fish swimming behaviors under solitary and schooling conditions and measured risk as the time individuals spent exposed to the barrier. Solitary fish generally turned with the current and moved quickly downstream past the barrier, while fish in groups swam against the current and displayed a 23-fold increase in exposure time. Solitary individuals also showed greater signs of skittish behavior than those released in groups, which was reflected by larger changes in their accelerations and turning profiles. While groups displayed fission-fusion dynamics, inter-individual positions were highly structured and remained steady over time. These spatial patterns align with theoretical positions necessary to reduce swimming exertion through either wake capturing or velocity sheltering, but diverge from any potential gains from channeling effects between adjacent neighbors. We conclude that isolated performance trials and projections based on individual behaviors can lead to erroneous predictions of risk exposure along engineered structures. Our results also suggest that risk perception and behavior may be more important than a fish's swimming stamina in artificially modified systems. PMID:25268736

Schooling increases risk exposure for fish navigating past artificial barriers.

PubMed

Lemasson, Bertrand H; Haefner, James W; Bowen, Mark D

2014-01-01

Artificial barriers have become ubiquitous features in freshwater ecosystems and they can significantly impact a region's biodiversity. Assessing the risk faced by fish forced to navigate their way around artificial barriers is largely based on assays of individual swimming behavior. However, social interactions can significantly influence fish movement patterns and alter their risk exposure. Using an experimental flume, we assessed the effects of social interactions on the amount of time required for juvenile palmetto bass (Morone chrysops × M. saxatilis) to navigate downstream past an artificial barrier. Fish were released either individually or in groups into the flume using flow conditions that approached the limit of their expected swimming stamina. We compared fish swimming behaviors under solitary and schooling conditions and measured risk as the time individuals spent exposed to the barrier. Solitary fish generally turned with the current and moved quickly downstream past the barrier, while fish in groups swam against the current and displayed a 23-fold increase in exposure time. Solitary individuals also showed greater signs of skittish behavior than those released in groups, which was reflected by larger changes in their accelerations and turning profiles. While groups displayed fission-fusion dynamics, inter-individual positions were highly structured and remained steady over time. These spatial patterns align with theoretical positions necessary to reduce swimming exertion through either wake capturing or velocity sheltering, but diverge from any potential gains from channeling effects between adjacent neighbors. We conclude that isolated performance trials and projections based on individual behaviors can lead to erroneous predictions of risk exposure along engineered structures. Our results also suggest that risk perception and behavior may be more important than a fish's swimming stamina in artificially modified systems.

Cytotoxic Effects of Nonionic Iodinated Contrast Agent on Human Adipose-derived Mesenchymal Stem Cells.

PubMed

Wu, Tao; Nie, Hai; Dietz, Allan B; Salek, David R; Smith, Jay; van Wijnen, Andre J; Qu, Wenchun

2018-05-31

Transplantation of mesenchymal stem cells (MSCs) is a promising therapy for degenerative spine conditions. However, cell therapy for painful spine degeneration presently requires use of contrast agents during fluoroscopy-guided injections and the effects of these agents on MSCs represents a gap in knowledge. To investigate the biological effects of contrast media that are co-injected with MSCs. Prospective observational study. Academic medical center. Patient-derived clinical-grade culture expanded MSCs. Iohexol(Omnipaque300) was reduced to 12.5%, 25%, 50% and 100% of the stock solution and incubated with MSCs for 30 minutes, 4 hours and 48 hours. We also used complete media and 12.5%, 25%, 50%, 100% of phosphate buffered saline (PBS) as control group. We examined cytotoxicity of Iohexol at different concentrations and exposure duration, as well as the potential for recovery over time. Cell counts, mitochondrial activity, and quantitative real time reverse-transcriptase polymerase chain reaction (qRT-PCR) of related genes were analyzed immediately after exposure (day 0) and after two days of exposure (day 2). Human MSCs exhibit a time- and concentration-dependent cytotoxic response to iodinated CM. A brief 30min exposure did not affect MSCs function and viability. However, extended treatment with iohexol for 4 hours at 50% or higher concentration had a significant impact on both viability and gene expression in MSCs. CM (Omnipaque300) is cytotoxic to MSCs in a time-and concentration-dependent manner. Hence, the concentration of CM that accompanies MSC injections should be carefully considered during mesenchymal stem cell therapy for disc degenerative diseases. Copyright © 2018 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Modeling personal particle-bound polycyclic aromatic hydrocarbon (pb-pah) exposure in human subjects in Southern California.

PubMed

Wu, Jun; Tjoa, Thomas; Li, Lianfa; Jaimes, Guillermo; Delfino, Ralph J

2012-07-11

Exposure to polycyclic aromatic hydrocarbon (PAH) has been linked to various adverse health outcomes. Personal PAH exposures are usually measured by personal monitoring or biomarkers, which are costly and impractical for a large population. Modeling is a cost-effective alternative to characterize personal PAH exposure although challenges exist because the PAH exposure can be highly variable between locations and individuals in non-occupational settings. In this study we developed models to estimate personal inhalation exposures to particle-bound PAH (PB-PAH) using data from global positioning system (GPS) time-activity tracking data, traffic activity, and questionnaire information. We conducted real-time (1-min interval) personal PB-PAH exposure sampling coupled with GPS tracking in 28 non-smoking women for one to three sessions and one to nine days each session from August 2009 to November 2010 in Los Angeles and Orange Counties, California. Each subject filled out a baseline questionnaire and environmental and behavior questionnaires on their typical activities in the previous three months. A validated model was used to classify major time-activity patterns (indoor, in-vehicle, and other) based on the raw GPS data. Multiple-linear regression and mixed effect models were developed to estimate averaged daily and subject-level PB-PAH exposures. The covariates we examined included day of week and time of day, GPS-based time-activity and GPS speed, traffic- and roadway-related parameters, meteorological variables (i.e. temperature, wind speed, relative humidity), and socio-demographic variables and occupational exposures from the questionnaire. We measured personal PB-PAH exposures for 180 days with more than 6 h of valid data on each day. The adjusted R2 of the model was 0.58 for personal daily exposures, 0.61 for subject-level personal exposures, and 0.75 for subject-level micro-environmental exposures. The amount of time in vehicle (averaging 4.5% of total sampling time) explained 48% of the variance in daily personal PB-PAH exposure and 39% of the variance in subject-level exposure. The other major predictors of PB-PAH exposures included length-weighted traffic count, work-related exposures, and percent of weekday time. We successfully developed regression models to estimate PB-PAH exposures based on GPS-tracking data, traffic data, and simple questionnaire information. Time in vehicle was the most important determinant of personal PB-PAH exposure in this population. We demonstrated the importance of coupling real-time exposure measures with GPS time-activity tracking in personal air pollution exposure assessment.

Prediction of thermal coagulation from the instantaneous strain distribution induced by high-intensity focused ultrasound

NASA Astrophysics Data System (ADS)

Iwasaki, Ryosuke; Takagi, Ryo; Tomiyasu, Kentaro; Yoshizawa, Shin; Umemura, Shin-ichiro

2017-07-01

The targeting of the ultrasound beam and the prediction of thermal lesion formation in advance are the requirements for monitoring high-intensity focused ultrasound (HIFU) treatment with safety and reproducibility. To visualize the HIFU focal zone, we utilized an acoustic radiation force impulse (ARFI) imaging-based method. After inducing displacements inside tissues with pulsed HIFU called the push pulse exposure, the distribution of axial displacements started expanding and moving. To acquire RF data immediately after and during the HIFU push pulse exposure to improve prediction accuracy, we attempted methods using extrapolation estimation and applying HIFU noise elimination. The distributions going back in the time domain from the end of push pulse exposure are in good agreement with tissue coagulation at the center. The results suggest that the proposed focal zone visualization employing pulsed HIFU entailing the high-speed ARFI imaging method is useful for the prediction of thermal coagulation in advance.

Too much of a good thing? Nitrate from nitrogen fertilizers and cancer.

PubMed

Ward, Mary H

2009-01-01

Nitrate levels in water supplies have been increasing in many areas of the world; therefore, additional studies of populations with well-characterized exposures are urgently needed to further our understanding of cancer risk associated with nitrate ingestion. Future studies should assess exposure for individuals (e.g., case-control, cohort studies) in a time frame relevant to disease development, and evaluate factors affecting nitrosation. Estimating N-nitroso compounds formation via nitrate ingestion requires information on dietary and drinking water sources of nitrate, inhibitors of nitrosation (e.g., vitamin C), nitrosation precursors (e.g., red meat, nitrosatable drugs), and medical conditions that may increase nitrosation (e.g., inflammatory bowel disease). Studies should account for the potentially different effects of dietary and water sources of nitrate and should include the population using private wells for whom exposure levels are often higher than public supplies.

A novel nanometric DNA thin film as a sensor for alpha radiation

PubMed Central

Kulkarni, Atul; Kim, Byeonghoon; Dugasani, Sreekantha Reddy; Joshirao, Pranav; Kim, Jang Ah; Vyas, Chirag; Manchanda, Vijay; Kim, Taesung; Park, Sung Ha

2013-01-01

The unexpected nuclear accidents have provided a challenge for scientists and engineers to develop sensitive detectors, especially for alpha radiation. Due to the high linear energy transfer value, sensors designed to detect such radiation require placement in close proximity to the radiation source. Here we report the morphological changes and optical responses of artificially designed DNA thin films in response to exposure to alpha radiation as observed by an atomic force microscope, a Raman and a reflectance spectroscopes. In addition, we discuss the feasibility of a DNA thin film as a radiation sensing material. The effect of alpha radiation exposure on the DNA thin film was evaluated as a function of distance from an 241Am source and exposure time. Significant reflected intensity changes of the exposed DNA thin film suggest that a thin film made of biomolecules can be one of promising candidates for the development of online radiation sensors. PMID:23792924

Plasma Vehicle Charging Analysis for Orion Flight Test 1

NASA Technical Reports Server (NTRS)

Lallement, L.; McDonald, T.; Norgard, J.; Scully, B.

2014-01-01

In preparation for the upcoming experimental test flight for the Orion crew module, considerable interest was raised over the possibility of exposure to elevated levels of plasma activity and vehicle charging both externally on surfaces and internally on dielectrics during the flight test orbital operations. Initial analysis using NASCAP-2K indicated very high levels of exposure, and this generated additional interest in refining/defining the plasma and spacecraft models used in the analysis. This refinement was pursued, resulting in the use of specific AE8 and AP8 models, rather than SCATHA models, as well as consideration of flight trajectory, time duration, and other parameters possibly affecting the levels of exposure and the magnitude of charge deposition. Analysis using these refined models strongly indicated that, for flight test operations, no special surface coatings were necessary for the thermal protection system, but would definitely be required for future GEO, trans-lunar, and extra-lunar missions...

Sharpening the focus on occupational safety and health in nanotechnology.

PubMed

Schulte, Paul; Geraci, Charles; Zumwalde, Ralph; Hoover, Mark; Castranova, Vincent; Kuempel, Eileen; Murashov, Vladimir; Vainio, Harri; Savolainen, Kai

2008-12-01

Increasing numbers of workers are involved with the production, use, distribution, and disposal of nanomaterials. At the same time, there is a growing number of reports of adverse biological effects of engineered nanoparticles in test systems. It is useful, at this juncture, to identify critical questions that will help address knowledge gaps concerning the potential occupational hazards of these materials. The questions address (i) hazard classification of engineered nanoparticles, (ii) exposure metrics, (iii) the actual exposures to the different engineered nanoparticles in the workplace, (iv) the limits of engineering controls and personal protective equipment with respect to engineered nanoparticles, (v) the kinds of surveillance programs that may be required at workplaces to protect potentially exposed workers, (vi) whether exposure registers should be established for workers potentially exposed to engineered nanoparticles, and, (vii) whether engineered nanoparticles should be treated as "new" substances and evaluated for safety and hazards?

Plasma Vehicle Charging Analysis for Orion Flight Test 1

NASA Technical Reports Server (NTRS)

Scully, B.; Norgard, J.

2015-01-01

In preparation for the upcoming experimental test flight for the Orion crew module, considerable interest was raised over the possibility of exposure to elevated levels of plasma activity and vehicle charging both externally on surfaces and internally on dielectrics during the flight test orbital operations. Initial analysis using NASCAP-2K indicated very high levels of exposure, and this generated additional interest in refining/defining the plasma and spacecraft models used in the analysis. This refinement was pursued, resulting in the use of specific AE8 and AP8 models, rather than SCATHA models, as well as consideration of flight trajectory, time duration, and other parameters possibly affecting the levels of exposure and the magnitude of charge deposition. Analysis using these refined models strongly indicated that, for flight test operations, no special surface coatings were necessary for the Thermal Protection System (TPS), but would definitely be required for future GEO, trans-lunar, and extra-lunar missions.

Just the right age: well-clustered exposure ages from a global glacial 10Be compilation

NASA Astrophysics Data System (ADS)

Heyman, Jakob; Margold, Martin

2017-04-01

Cosmogenic exposure dating has been used extensively for defining glacial chronologies, both in ice sheet and alpine settings, and the global set of published ages today reaches well beyond 10,000 samples. Over the last few years, a number of important developments have improved the measurements (with well-defined AMS standards) and exposure age calculations (with updated data and methods for calculating production rates), in the best case enabling high precision dating of past glacial events. A remaining problem, however, is the fact that a large portion of all dated samples have been affected by prior and/or incomplete exposure, yielding erroneous exposure ages under the standard assumptions. One way to address this issue is to only use exposure ages that can be confidently considered as unaffected by prior/incomplete exposure, such as groups of samples with statistically identical ages. Here we use objective statistical criteria to identify groups of well-clustered exposure ages from the global glacial "expage" 10Be compilation. Out of ˜1700 groups with at least 3 individual samples ˜30% are well-clustered, increasing to ˜45% if allowing outlier rejection of a maximum of 1/3 of the samples (still requiring a minimum of 3 well-clustered ages). The dataset of well-clustered ages is heavily dominated by ages <30 ka, showing that well-defined cosmogenic chronologies primarily exist for the last glaciation. We observe a large-scale global synchronicity in the timing of the last deglaciation from ˜20 to 10 ka. There is also a general correlation between the timing of deglaciation and latitude (or size of the individual ice mass), with earlier deglaciation in lower latitudes and later deglaciation towards the poles. Grouping the data into regions and comparing with available paleoclimate data we can start to untangle regional differences in the last deglaciation and the climate events controlling the ice mass loss. The extensive dataset and the statistical analysis enables an unprecedented global view on the last deglaciation.

Catalog of Wargaming and Military Simulation Models.

DTIC Science & Technology

1982-05-01

ix War Games and Simulations ............................ 1-823 Functional Index ................................ Appendix A Data Collection Sheet...34AGTM (An Air and Ground Theatre Model); User’s Guide and Program Description," Jan 1974 (NU) TIME REQUIREMENTS: Collection of the data base can be...to exposures. Facilities can be provided in any series to collect and output data on any specific subject, appropriate to the level of the game. 97

A Comparison of Three IRT Approaches to Examinee Ability Change Modeling in a Single-Group Anchor Test Design

ERIC Educational Resources Information Center

Paek, Insu; Park, Hyun-Jeong; Cai, Li; Chi, Eunlim

2014-01-01

Typically a longitudinal growth modeling based on item response theory (IRT) requires repeated measures data from a single group with the same test design. If operational or item exposure problems are present, the same test may not be employed to collect data for longitudinal analyses and tests at multiple time points are constructed with unique…

Minimum health and safety requirements for workers exposed to hand-transmitted vibration and whole-body vibration in the European Union; a review

PubMed Central

Griffin, M

2004-01-01

In 2002, the Parliament and Commission of the European Community agreed "minimum health and safety requirements" for the exposure of workers to the risks arising from vibration. The Directive defines qualitative requirements and also quantitative requirements in the form of "exposure action values" and "exposure limit values". The quantitative guidance is based on, but appears to conflict with, the guidance in International Standards for hand-transmitted vibration (ISO 5349) and whole-body vibration (ISO 2631). There is a large internal inconsistency within the Directive for short duration exposures to whole-body vibration: the two alternative methods give very different values. It would appear prudent to base actions on the qualitative guidance (i.e. reducing risk to a minimum) and only refer to the quantitative guidance where there is no other reasonable basis for the identification of risk (i.e. similar exposures are not a suspected cause of injury). Health surveillance and other precautions will be appropriate wherever there is reason to suspect a risk and will not be restricted to conditions where the exposure action value is exceeded. PMID:15090658

Action spectrum for phototherapy of psoriasis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parrish, J.A.; Jaenicke, K.F.

1981-05-01

Using a monochromator the action spectrum for ultraviolet phototherapy of psoriasis was determined for radiation between 254 and 313 nm and compared to the action spectrum for erythema of uninvolved adjacent skin. Daily exposures of different doses of 254, 280, 290, 296, 300, 304 and 313 nm radiation were observed. Wavelengths of 254, 280, 290 nm were erythemogenic but not therapeutic even at 10 to 50 times the minimal erythema dose. At the other wavelengths studied, the 2 action spectra were similar. In general, fixed daily doses cleared at lower cumulative dose than did incrementally increased daily doses. The smallmore » number of suberythemogenic exposure doses required suggests that monochromatic radiation may have advantages over broadband sources.« less

Production, Delivery and Application of Vibration Energy in Healthcare

NASA Astrophysics Data System (ADS)

Abundo, Paolo; Trombetta, Chiara; Foti, Calogero; Rosato, Nicola

2011-02-01

In Rehabilitation Medicine therapeutic application of vibration energy in specific clinical treatments and in sport rehabilitation is being affirmed more and more.Vibration exposure can have positive or negative effects on the human body depending on the features and time of the characterizing wave. The human body is constantly subjected to different kinds of vibrations, inducing bones and muscles to actively modify their structure and metabolism in order to fulfill the required functions. Like every other machine, the body supports only certain vibration energy levels over which long term impairments can be recognized. As shown in literature anyway, short periods of vibration exposure and specific frequency values can determine positive adjustments.

Inhalation testing of toiletries in animals.

PubMed

Wells, A B

1979-06-01

Synopsis The purpose of testing is to establish the safety of ingredients to be handled in the factory and of the products to be used by the consumer. Inhalation tests tend to require much time and are expensive; the number of inhalation tests may be reduced by preliminary measurement of the respirable fraction of an aerosol or powder, by toxicity tests on macrophages in culture, and by instillation of suspensions into the lung via the trachea. Inhalation exposures may be in whole body exposure chambers or the head only may be exposed; the techniques are discussed. The criteria of a satisfactory inhalation test are considered and histological features which should be investigated are reviewed.

Hubble Space Telescope: Fine guidance sensors instrument handbook. Version 2.1

NASA Technical Reports Server (NTRS)

Taff, Larry (Editor)

1990-01-01

The Fine Guidance Sensors (FGS) are a system of photomultiplier tubes and white light amplitude interferometers (Koester's prism) which are used for the fine guidance of the Hubble Space Telescope (HST). The purpose of the handbook is to provide information to a potential user of the FGS so that he may explore the feasibility of performing various observations. A brief overview is given of how the FGS works, along with an explanation of the instrument in some detail. The procedure for estimating exposure times is explained. The observing modes are described. Some details needed to specify the exposures and observation requirements on the proposal forms are explained. Data reduction procedures are outlined.

High Throughput Exposure Estimation Using NHANES Data (SOT)

EPA Science Inventory

In the ExpoCast project, high throughput (HT) exposure models enable rapid screening of large numbers of chemicals for exposure potential. Evaluation of these models requires empirical exposure data and due to the paucity of human metabolism/exposure data such evaluations includ...

Historical reconstruction of wastewater and land use impacts to groundwater used for public drinking water: exposure assessment using chemical data and GIS.

PubMed

Swartz, Christopher H; Rudel, Ruthann A; Kachajian, Jennifer R; Brody, Julia G

2003-09-01

Land use in geographic areas that replenish groundwater and surface water resources is increasingly recognized as an important factor affecting drinking water quality. Efforts to understand the implications for health, particularly outcomes with long latency or critical exposure windows, have been hampered by lack of historical exposure data for unregulated pollutants. This limitation has hindered studies of the possible links between breast cancer risk and drinking water impacted by endocrine disrupting compounds and mammary carcinogens, for example. This paper describes a methodology to assess potential historical exposure to a broad range of chemicals associated with wastewater and land use impacts to 132 groundwater wells and one surface water body supplying drinking water to 18 public distribution systems on Cape Cod, MA. We calculated annual measures of impact to each distribution system and used the measures as exposure estimates for the residential addresses of control women in the Cape Cod Breast Cancer and Environment Study (Cape Cod Study). Impact was assessed using (1) historical chemical measurements of nitrate at the water supply sources (performed as required by the Safe Water Drinking Act) and (2) a geographic information system analysis of land use within the zones of contribution (ZOCs) delineated for each well in a state-mandated wellhead protection program. The period for which these impact estimates were developed (1972-1995) was constrained by the availability of chemical measurements and land use data and consideration of time required for groundwater transport of contaminants to the water supply wells. Trends in these estimates for Cape Cod suggest increasing impact to drinking water quality for land use over the study period. Sensitivity analyses were conducted to assess the effect on the distribution of controls' cumulative exposure estimates from (1) reducing the area of the ZOCs to reflect typical well operating conditions rather than extreme pumping conditions used for the regulatory ZOCs, (2) assuming residences received their drinking water entirely from the closest well or cluster of wells rather than a volume-weighted annual district-wide average, and (3) changing the travel time considered for contaminants to reach wells from land use sources. We found that the rank and distribution of controls' cumulative exposure estimates were affected most by the assumption concerning district mixing; in particular, assignment of exposure estimates based on impact values for the closest well(s) consistently produced a larger number of unexposed controls than when a district-wide average impact value was used. As expected, the results suggest that adequate characterization of water quality heterogeneity within water supplies is an important component of exposure assessment methodologies in health studies investigating impacted drinking water.

An introduction to the indirect exposure assessment approach: modeling human exposure using microenvironmental measurements and the recent National Human Activity Pattern Survey.

PubMed Central

Klepeis, N E

1999-01-01

Indirect exposure approaches offer a feasible and accurate method for estimating population exposures to indoor pollutants, including environmental tobacco smoke (ETS). In an effort to make the indirect exposure assessment approach more accessible to people in the health and risk assessment fields, this paper provides examples using real data from (italic>a(/italic>) a week-long personal carbon monoxide monitoring survey conducted by the author; and (italic>b(/italic>) the 1992 to 1994 National Human Activity Pattern Survey (NHAPS) for the United States. The indirect approach uses measurements of exposures in specific microenvironments (e.g., homes, bars, offices), validated microenvironmental models (based on the mass balance equation), and human activity pattern data obtained from questionnaires to predict frequency distributions of exposure for entire populations. This approach requires fewer resources than the direct approach to exposure assessment, for which the distribution of monitors to a representative sample of a given population is necessary. In the indirect exposure assessment approach, average microenvironmental concentrations are multiplied by the total time spent in each microenvironment to give total integrated exposure. By assuming that the concentrations encountered in each of 10 location categories are the same for different members of the U.S. population (i.e., the NHAPS respondents), the hypothetical contribution that ETS makes to the average 24-hr respirable suspended particle exposure for Americans working their main job is calculated in this paper to be 18 microg/m3. This article is an illustrative review and does not contain an actual exposure assessment or model validation. Images Figure 3 Figure 4 PMID:10350522

IR Imager Exposure Calculator

Science.gov Websites

CTIO Infrared Imager Exposure Time Calculator Note: ISPI throughput values updated 12 March 2005 S/N ratio 10 Exposure Time 1 (seconds) Calculate S/N for specified Total Integration Time Calculate Total Integration Time to reach Desired S/N Submit Exposure Calculation Request [CTIO Home] [CTIO IR

Risk-based indicators of Canadians' exposures to environmental carcinogens.

PubMed

Setton, Eleanor; Hystad, Perry; Poplawski, Karla; Cheasley, Roslyn; Cervantes-Larios, Alejandro; Keller, C Peter; Demers, Paul A

2013-02-12

Tools for estimating population exposures to environmental carcinogens are required to support evidence-based policies to reduce chronic exposures and associated cancers. Our objective was to develop indicators of population exposure to selected environmental carcinogens that can be easily updated over time, and allow comparisons and prioritization between different carcinogens and exposure pathways. We employed a risk assessment-based approach to produce screening-level estimates of lifetime excess cancer risk for selected substances listed as known carcinogens by the International Agency for Research on Cancer. Estimates of lifetime average daily intake were calculated using population characteristics combined with concentrations (circa 2006) in outdoor air, indoor air, dust, drinking water, and food and beverages from existing monitoring databases or comprehensive literature reviews. Intake estimates were then multiplied by cancer potency factors from Health Canada, the United States Environmental Protection Agency, and the California Office of Environmental Health Hazard Assessment to estimate lifetime excess cancer risks associated with each substance and exposure pathway. Lifetime excess cancer risks in excess of 1 per million people are identified as potential priorities for further attention. Based on data representing average conditions circa 2006, a total of 18 carcinogen-exposure pathways had potential lifetime excess cancer risks greater than 1 per million, based on varying data quality. Carcinogens with moderate to high data quality and lifetime excess cancer risk greater than 1 per million included benzene, 1,3-butadiene and radon in outdoor air; benzene and radon in indoor air; and arsenic and hexavalent chromium in drinking water. Important data gaps were identified for asbestos, hexavalent chromium and diesel exhaust in outdoor and indoor air, while little data were available to assess risk for substances in dust, food and beverages. The ability to track changes in potential population exposures to environmental carcinogens over time, as well as to compare between different substances and exposure pathways, is necessary to support comprehensive, evidence-based prevention policy. We used estimates of lifetime excess cancer risk as indicators that, although based on a number of simplifying assumptions, help to identify important data gaps and prioritize more detailed data collection and exposure assessment needs.

Effective biological dose from occupational exposure during nanoparticle synthesis

NASA Astrophysics Data System (ADS)

Demou, Evangelia; Tran, Lang; Housiadas, Christos

2009-02-01

Nanomaterial and nanotechnology safety require the characterization of occupational exposure levels for completing a risk assessment. However, equally important is the estimation of the effective internal dose via lung deposition, transport and clearance mechanisms. An integrated source-to-biological dose assessment study is presented using real monitoring data collected during nanoparticle synthesis. Experimental monitoring data of airborne exposure levels during nanoparticle synthesis of CaSO4 and BiPO4 nanoparticles in a research laboratory is coupled with a human lung transport and deposition model, which solves in an Eulerian framework the general dynamic equation for polydisperse aerosols using particle specific physical-chemical properties. Subsequently, the lung deposition model is coupled with a mathematical particle clearance model providing the effective biological dose as well as the time course of the biological dose build-up after exposure. The results for the example of BiPO4 demonstrate that even short exposures throughout the day can lead to particle doses of 1.10·E+08#/(kg-bw·8h-shift), with the majority accumulating in the pulmonary region. Clearance of particles is slow and is not completed within a working shift following a 1 hour exposure. It mostly occurs via macrophage activity in the alveolar region, with small amounts transported to the interstitium and less to the lymph nodes.

The child health exposure analysis resource as a vehicle to measure environment in the environmental influences on child health outcomes program.

PubMed

Wright, Robert O; Teitelbaum, Susan; Thompson, Claudia; Balshaw, David

2018-04-01

Demonstrate the role of environment as a predictor of child health. The children's health exposure analysis resource (CHEAR) assists the Environmental influences on child health outcomes (ECHO) program in understanding the time sensitive and dynamic nature of perinatal and childhood environment on developmental trajectories by providing a central infrastructure for the analysis of biological samples from the ECHO cohort awards. CHEAR will assist ECHO cohorts in defining the critical or sensitive period for effects associated with environmental exposures. Effective incorporation of these principles into multiple existing cohorts requires extensive multidisciplinary expertise, creativity, and flexibility. The pursuit of life course - informed research within the CHEAR/ECHO structure represents a shift in focus from single exposure inquiries to one that addresses multiple environmental risk factors linked through shared vulnerabilities. CHEAR provides ECHO both targeted analyses of inorganic and organic toxicants, nutrients, and social-stress markers and untargeted analyses to assess the exposome and discovery of exposure-outcome relationships. Utilization of CHEAR as a single site for characterization of environmental exposures within the ECHO cohorts will not only support the investigation of the influence of environment on children's health but also support the harmonization of data across the disparate cohorts that comprise ECHO.

Endoclip Magnetic Resonance Imaging Screening: A Local Practice Review.

PubMed

Accorsi, Fabio; Lalonde, Alain; Leswick, David A

2018-05-01

Not all endoscopically placed clips (endoclips) are magnetic resonance imaging (MRI) compatible. At many institutions, endoclip screening is part of the pre-MRI screening process. Our objective is to determine the contribution of each step of this endoclip screening protocol in determining a patient's endoclip status at our institution. A retrospective review of patients' endoscopic histories on general MRI screening forms for patients scanned during a 40-day period was performed to assess the percentage of patients that require endoclip screening at our institution. Following this, a prospective evaluation of 614 patients' endoclip screening determined the percentage of these patients ultimately exposed to each step in the protocol (exposure), and the percentage of patients whose endoclip status was determined with reasonable certainty by each step (determination). Exposure and determination values for each step were calculated as follows (exposure, determination): verbal interview (100%, 86%), review of past available imaging (14%, 36%), review of endoscopy report (9%, 57%), and new abdominal radiograph (4%, 96%), or CT (0.2%, 100%) for evaluation of potential endoclips. Only 1 patient did not receive MRI because of screening (in situ gastrointestinal endoclip identified). Verbal interview is invaluable to endoclip screening, clearing 86% of patients with minimal monetary and time investment. Conversely, the limited availability of endoscopy reports and relevant past imaging somewhat restricts the determination rates of these. New imaging (radiograph or computed tomography) is required <5% of the time, and although costly and associated with patient irradiation, has excellent determination rates (above 96%) when needed. Copyright © 2017 Canadian Association of Radiologists. Published by Elsevier Inc. All rights reserved.

Posttraumatic stress two years after the Oklahoma City bombing in youths geographically distant from the explosion.

PubMed

Pfefferbaum, B; Seale, T W; McDonald, N B; Brandt, E N; Rainwater, S M; Maynard, B T; Meierhoefer, B; Miller, P D

2000-01-01

This article describes Posttraumatic Stress Disorder (PTSD) symptomatology in 69 sixth-grade youths who resided within 100 miles of Oklahoma City at the time of the 1995 bombing of the Alfred P. Murrah Federal Building. These youths neither had any direct physical exposure nor personally knew anyone killed or injured in the explosion. A survey conducted two years after the bombing assessed exposure, PTSD symptoms, and functioning. PTSD symptom frequency was measured with the Impact of Event Scale--Revised. Our BCD criteria for defining PTSD caseness was modeled after DSM-IV B, C, and D criteria requiring one reexperiencing, three avoidance/numbing, and two arousal symptoms for diagnosis. Those who met our BCD criteria had significantly higher PTSD symptom scores than those who did not. Both increased mean PTSD symptom score and meeting our caseness definition were associated with increased functioning difficulties. Media exposure and indirect interpersonal exposure (having a friend who knew someone killed or injured) were significant predictors of symptomatology. These findings suggest that children geographically distant from disaster who have not directly experienced an interpersonal loss report PTSD symptoms and functional impairment associated with increased media exposure and indirect loss.

Animal studies of life shortening and cancer risk from space radiation

NASA Astrophysics Data System (ADS)

Wood, D. H.; Yochmowitz, M. G.; Hardy, K. A.; Salmon, Y. L.

The U. S. Air Force study of the delayed effects of single, total body exposures to simulated space radiation in rhesus monkeys is now in its 21st year. Observations on 301 irradiated and 57 age-matched control animals indicate that life expectancy loss from exposure to protons in the energy range encountered in the Van Allen belts and solar proton events can be expressed as a logarithmic function of the dose. The primary causes of life shortening are cancer and endometriosis (an abnormal proliferation of the lining of the uterus in females). Life shortening estimates permit comparison of the risk associated with space radiation exposures to be compared with that of other occupational and environmental hazards, thereby facilitating risk/benefit decisions in the planning and operational phases of manned space missions. Calculations of the relative risk of fatal cancers in the irradiated subjects reveal that the total body surface dose required to double the risk of death from cancer over a 20-year post exposure period varies with the linear energy transfer (LET) of the radiation. The ability to determine the integrated dose and LET spectrum in space radiation exposures of human is, therefore, critical to the assessment of life-time cancer risk.

Validation of the analysis of respirable crystalline silica (quartz) in foams used with CIP 10-R samplers.

PubMed

Eypert-Blaison, Céline; Moulut, Jean-Claude; Lecaque, Thierry; Marc, Florian; Kauffer, Edmond

2011-05-01

Sampling the respirable fraction to measure exposure to crystalline silica is most often carried out using cyclones. However, low flow rates (<4 l min(-1)) and continuing improvement in workplace hygiene means less and less material is sampled for analysis, resulting in increased analytical uncertainty. Use of the CIP 10-R sampler, working at a flow rate of 10 l min(-1), is one attempt to solve current analytical difficulties. To check the ability of the analysis of quartz sampled on foams, known amounts of quartz associated with a matrix have been injected into foams. The results obtained show that the proposed protocol, with prior acid attack and ashing of the foams, satisfies the recommendations of EN 482 Standard [CEN. (2006) Workplace atmospheres-general requirements for the performance of procedures for the measurements of chemical agents. Brussels, Belgium: EN 482 Comité Européen de normalization (CEN).], namely an expanded uncertainty of <50% for quartz weights between 0.1 and 0.5 times the 8-h exposure limit value and <30% for quartz weights between 0.5 and 2 times the 8-h exposure limit value, assuming an exposure limit value equal to 0.1 mg m(-3). Results obtained show that the 101 reflection line allows a quartz quantity of the order of 25 μg to be satisfactorily measured, which corresponds to a 10th of the exposure limit value, assuming an exposure limit value of 0.05 mg m(-3). In this case, the 100 and 112 reflection lines with expanded uncertainties of ~50% would also probably lead to satisfactory quantification. Particular recommendations are also proposed for the preparation of calibration curves to improve the method.

The Effect of Route, Vehicle, and Divided Doses on the Pharmacokinetics of Chlorpyrifos and its Metabolite Trichloropyridinol in Neonatal Sprague-Dawley Rats

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marty, M. S.; Domoradzki, J. Y.; Hansen, S. C.

2007-12-01

There is a paucity of data on neonatal systemic exposure using different dosing paradigms. Male CD (Sprague-Dawley derived) rats at postnatal day (PND) 5 were dosed with chlorpyrifos (CPF, 1 mg/kg) using different routes of exposure, vehicles, and single vs. divided doses. Blood concentrations of CPF and its primary metabolite, trichloropyridinol (TCP), were measured at multiple times through 24 h. Groups included: single gavage bolus vs. divided gavage doses in corn oil (1 vs 3 times in 24 h), single gavage bolus vs. divided gavage doses in rat milk, and subcutaneous administration in DMSO. These data were compared with lactationalmore » exposure of PND 5 pups from dams exposed to CPF in the diet at 5 mg/kg/day for four weeks or published data from dams exposed to daily gavage with CPF at 5 mg/kg/day. Maternal blood CPF levels were an order of magnitude lower from dietary exposure than gavage (1.1 vs 14.8 ng/g), and blood CPF levels in PND 5 pups that nursed dietary-exposed or gavage-exposed dams were below the limit of detection. Single gavage doses of 1 mg/kg CPF in corn oil vehicle in pups resulted in CPF blood levels of 49 ng/g, and in milk vehicle about 9 ng/g. Divided doses led to lower peak CPF levels. A bolus dose of 1 mg/kg CPF in DMSO administered sc appeared to have substantially altered pharmacokinetics from orally administered chlorpyrifos. To be meaningful for risk assessment, neonatal studies require attention to the exposure scenario, since route, vehicle, dose and frequency of administration result in different systemic exposure to the test chemical and its metabolites.« less

Acidic sulfate aerosols: characterization and exposure.

PubMed Central

Lioy, P J; Waldman, J M

1989-01-01

Exposures to acidic aerosol in the atmosphere are calculated from data reported in the scientific literature. The majority of date was not derived from studies necessarily designed to examine human exposures. Most of the studies were designed to investigate the characteristics of the atmosphere. However, the measurements were useful in defining two potential exposure situations: regional stagnation and transport conditions and local plume impacts. Levels of acidic aerosol in excess of 20 to 40 micrograms/m3 (as H2SO4) have been observed for time durations ranging from 1 to 12 hr. These were associated with high, but not necessarily the highest, atmospheric SO4(2)- levels. Exposures of 100 to 900 micrograms/m3/hr were calculated for the acid events that were monitored. In contrast, earlier London studies indicated that apparent acidity in excess of 100 micrograms/m3 (as H2SO4) was present in the atmosphere, and exposures less than 2000 micrograms/m3/hr were possible. Our present knowledge about the frequency, magnitude, and duration of acidic sulfate aerosol events and episodes is insufficient. Efforts must be made to gather more data, but these should be done in such a way that evaluation of human exposure is the focus of the research. In addition, further data are required on the mechanisms of formation of H2SO4 and on what factors can be used to predict acidic sulfate episodes. PMID:2651103

Non-thermal Plasma Exposure Rapidly Attenuates Bacterial AHL-Dependent Quorum Sensing and Virulence.

PubMed

Flynn, Padrig B; Busetti, Alessandro; Wielogorska, Ewa; Chevallier, Olivier P; Elliott, Christopher T; Laverty, Garry; Gorman, Sean P; Graham, William G; Gilmore, Brendan F

2016-05-31

The antimicrobial activity of atmospheric pressure non-thermal plasma has been exhaustively characterised, however elucidation of the interactions between biomolecules produced and utilised by bacteria and short plasma exposures are required for optimisation and clinical translation of cold plasma technology. This study characterizes the effects of non-thermal plasma exposure on acyl homoserine lactone (AHL)-dependent quorum sensing (QS). Plasma exposure of AHLs reduced the ability of such molecules to elicit a QS response in bacterial reporter strains in a dose-dependent manner. Short exposures (30-60 s) produce of a series of secondary compounds capable of eliciting a QS response, followed by the complete loss of AHL-dependent signalling following longer exposures. UPLC-MS analysis confirmed the time-dependent degradation of AHL molecules and their conversion into a series of by-products. FT-IR analysis of plasma-exposed AHLs highlighted the appearance of an OH group. In vivo assessment of the exposure of AHLs to plasma was examined using a standard in vivo model. Lettuce leaves injected with the rhlI/lasI mutant PAO-MW1 alongside plasma treated N-butyryl-homoserine lactone and n-(3-oxo-dodecanoyl)-homoserine lactone, exhibited marked attenuation of virulence. This study highlights the capacity of atmospheric pressure non-thermal plasma to modify and degrade AHL autoinducers thereby attenuating QS-dependent virulence in P. aeruginosa.

Risk factors for tube exposure as a late complication of glaucoma drainage implant surgery.

PubMed

Chaku, Meenakshi; Netland, Peter A; Ishida, Kyoko; Rhee, Douglas J

2016-01-01

The purpose of this study was to evaluate the risk factors for tube exposure after glaucoma drainage implant surgery. This was a retrospective case-controlled observational study of 64 eyes from 64 patients. Thirty-two eyes of 32 patients with tube erosion requiring surgical revision were compared with 32 matched control eyes of 32 patients. Univariate and multivariate risk factor analyses were performed. Mean age was significantly younger in the tube exposure group compared with the control group (48.2±28.1 years versus 67.3±18.0 years, respectively; P=0.003). The proportion of diabetic patients (12.5%) in the tube exposure group was significantly less (P=0.041) compared with the control group (37.5%). Comparisons of the type and position of the drainage implant were not significantly different between the two groups. The average time to tube exposure was 17.2±18.0 months after implantation of the drainage device. In both univariate and multivariate analyses, younger age (P=0.005 and P=0.027) and inflammation prior to tube exposure (P≤0.001 and P=0.004) were significant risk factors. Diabetes was a significant risk factor only in the univariate analysis (P=0.027). Younger age and inflammation were significant risk factors for tube exposure after drainage implant surgery.

Non-thermal Plasma Exposure Rapidly Attenuates Bacterial AHL-Dependent Quorum Sensing and Virulence

PubMed Central

Flynn, Padrig B.; Busetti, Alessandro; Wielogorska, Ewa; Chevallier, Olivier P.; Elliott, Christopher T.; Laverty, Garry; Gorman, Sean P.; Graham, William G.; Gilmore, Brendan F.

2016-01-01

The antimicrobial activity of atmospheric pressure non-thermal plasma has been exhaustively characterised, however elucidation of the interactions between biomolecules produced and utilised by bacteria and short plasma exposures are required for optimisation and clinical translation of cold plasma technology. This study characterizes the effects of non-thermal plasma exposure on acyl homoserine lactone (AHL)-dependent quorum sensing (QS). Plasma exposure of AHLs reduced the ability of such molecules to elicit a QS response in bacterial reporter strains in a dose-dependent manner. Short exposures (30–60 s) produce of a series of secondary compounds capable of eliciting a QS response, followed by the complete loss of AHL-dependent signalling following longer exposures. UPLC-MS analysis confirmed the time-dependent degradation of AHL molecules and their conversion into a series of by-products. FT-IR analysis of plasma-exposed AHLs highlighted the appearance of an OH group. In vivo assessment of the exposure of AHLs to plasma was examined using a standard in vivo model. Lettuce leaves injected with the rhlI/lasI mutant PAO-MW1 alongside plasma treated N-butyryl-homoserine lactone and n-(3-oxo-dodecanoyl)-homoserine lactone, exhibited marked attenuation of virulence. This study highlights the capacity of atmospheric pressure non-thermal plasma to modify and degrade AHL autoinducers thereby attenuating QS-dependent virulence in P. aeruginosa. PMID:27242335

One Isotope, Two Tales: using plant and cosmogenic 14C to constrain Holocene glacier activity on Baffin Island.

NASA Astrophysics Data System (ADS)

Pendleton, S.; Miller, G. H.; Lifton, N. A.; Young, N. E.

2017-12-01

As the cryosphere continues to undergo rapid and accelerating change, it is more important than ever to understand past glacier activity to predict the future of the cryosphere. However, continuous Holocene glacier records are notoriously difficult to reconstruct because an advancing glacier will re-incorporate previous deposits so that moraines typically only record the farthest downvalley glacier expansion. Here we combine dates of ice margin advance from in situ dead vegetation with in situ cosmogenic 14C (in situ 14C) from preserved bedrock surfaces at the same locations to further constrain the timing of ice-free episodes during the Holocene following deglaciation on southern Baffin Island. Radiocarbon ages from recently exposed in situ plants suggest that ice last advanced over sample locations at 9.4, 9.2, 9.0, and 3.7 ka and that they remained ice covered until modern times. Associated in situ 14C inventories are variable, but well above background levels, suggesting some amount of Holocene in situ 14C production. Using plant 14C ages representing the beginning of ice coverage and in situ 14C inventories representative of exposure prior to ice coverage, a simple model of cosmogenic in situ 14C production (accounting for muon production through ice) provides constraints timing and duration of ice-free times at sample locations prior to their most recent burial. Using conservative Holocene ice thicknesses, the locations buried at 9.4, 9.2, and 9.0 ka require, at minimum, 1000 years of pre-burial exposure to match the observed in situ 14C inventory. This suggests these locations were ice free by at least 10 ka and likely earlier. The in situ 14C inventory at the location buried at 3.7 ka limits prior exposure to 2000 years, suggesting that this location experienced more complex Holocene ice cover/burial history. These pilot data show that valuable information regarding periods of exposure is contained within in situ 14C inventories. Additional paired plant and in situ 14C analyses currently underway will provide further constraints on the timing and duration of Holocene exposure. The combination of these two dating techniques supplies some of the first constraints on both ice cover and exposure and provides much needed information about the evolution of glaciers on southern Baffin Island following deglaciation.

Lagged kernel machine regression for identifying time windows of susceptibility to exposures of complex mixtures.

PubMed

Liu, Shelley H; Bobb, Jennifer F; Lee, Kyu Ha; Gennings, Chris; Claus Henn, Birgit; Bellinger, David; Austin, Christine; Schnaas, Lourdes; Tellez-Rojo, Martha M; Hu, Howard; Wright, Robert O; Arora, Manish; Coull, Brent A

2018-07-01

The impact of neurotoxic chemical mixtures on children's health is a critical public health concern. It is well known that during early life, toxic exposures may impact cognitive function during critical time intervals of increased vulnerability, known as windows of susceptibility. Knowledge on time windows of susceptibility can help inform treatment and prevention strategies, as chemical mixtures may affect a developmental process that is operating at a specific life phase. There are several statistical challenges in estimating the health effects of time-varying exposures to multi-pollutant mixtures, such as: multi-collinearity among the exposures both within time points and across time points, and complex exposure-response relationships. To address these concerns, we develop a flexible statistical method, called lagged kernel machine regression (LKMR). LKMR identifies critical exposure windows of chemical mixtures, and accounts for complex non-linear and non-additive effects of the mixture at any given exposure window. Specifically, LKMR estimates how the effects of a mixture of exposures change with the exposure time window using a Bayesian formulation of a grouped, fused lasso penalty within a kernel machine regression (KMR) framework. A simulation study demonstrates the performance of LKMR under realistic exposure-response scenarios, and demonstrates large gains over approaches that consider each time window separately, particularly when serial correlation among the time-varying exposures is high. Furthermore, LKMR demonstrates gains over another approach that inputs all time-specific chemical concentrations together into a single KMR. We apply LKMR to estimate associations between neurodevelopment and metal mixtures in Early Life Exposures in Mexico and Neurotoxicology, a prospective cohort study of child health in Mexico City.

Elevated plus-maze performance of Fischer-344 rats as a function of age and of exposure to 56Fe particles

NASA Astrophysics Data System (ADS)

Rabin, Bernard M.; Carrihill-Knoll, Kirsty L.; Carey, Amanda N.; Shukitt-Hale, Barbara; Joseph, James A.; Foster, Brian C.

The aging process is characterized by a series of changes in neurochemical functioning and in motor and cognitive performance. In addition to changes in cognitive/behavioral performance, aged rats also show an increase in baseline anxiety measured using the elevated plus-maze. Exposure to 56Fe particles, a component of cosmic rays, produces neurochemical and behavioral changes in young animals which are characteristic of aged organisms. The present study was designed to determine the relationships between aging and exposure to 56Fe particles on anxiety. Fischer-344 (F-344), which were 2, 7, 12, and 16 months of age at the time of irradiation, were exposed to 56Fe particles (50 200 cGy). Concordant with previous results, the oldest rats spent less time exploring the open arms of the maze. Exposure to 56Fe particles also produced decreased exploration of the open arms of the plus-maze. The dose needed to produce increased levels of anxiety was a function of age at the time of irradiation. The dose of 56Fe particles needed to produce a decrease in open arm exploration was significantly lower in the rats that were irradiated at 7 and 12 months of age than in the rats irradiated at 2 months of age. These results suggest the possibility that exposing middle-aged astronauts to cosmic rays during exploratory class missions outside the magnetosphere, and the resultant effects on exploration-induced anxiety, may affect their ability to successfully complete mission requirements.

The medical implications of space tourism.

PubMed

Tarzwell, R

2000-06-01

Commercial space travel may soon be a reality. If so, microgravity, high acceleration, and radiation exposure, all known hazards, will be accessible to the general public. Therefore, space tourism has medical implications. Even though the first flights will feature space exposure times of only a few minutes, the potential may someday exist for exposure times long enough to warrant careful consideration of the potential hazards to the space-faring public. The effects of acceleration and microgravity exposure are well known on the corps of astronauts and cosmonauts. The effects of space radiation are partially known on astronauts, but much remains to be discovered. However, there are problems using astronaut data to make inferences about the general public. Astronauts are not necessarily representative of the general public, since they are highly fit, highly screened individuals. Astronaut data can tell us very little about the potential hazards of microgravity in pediatric, obstetric and geriatric populations, all of whom are potential space tourists. Key issues in standard setting will be determining acceptable limits of pre-existing disease and inferring medical standards from mission profiles. It will not be a trivial task drafting minimal medical standards for commercial space travel. It will require the collaboration of space medicine physicians, making the best guesses possible, based on limited amounts of data, with limited applicability. A helpful departure point may be the USAF Class 3 medical standard, applicable to NASA payload specialists. It is time to begin preliminary discussions toward defining those standards. acceleration, aerospace medicine, medical standards, microgravity, radiation, space, space tourism, environmental hazards, environmental medicine.

Effects of total sleep deprivation on divided attention performance

PubMed Central

2017-01-01

Dividing attention across two tasks performed simultaneously usually results in impaired performance on one or both tasks. Most studies have found no difference in the dual-task cost of dividing attention in rested and sleep-deprived states. We hypothesized that, for a divided attention task that is highly cognitively-demanding, performance would show greater impairment during exposure to sleep deprivation. A group of 30 healthy males aged 21–30 years was exposed to 40 h of continuous wakefulness in a laboratory setting. Every 2 h, subjects completed a divided attention task comprising 3 blocks in which an auditory Go/No-Go task was 1) performed alone (single task); 2) performed simultaneously with a visual Go/No-Go task (dual task); and 3) performed simultaneously with both a visual Go/No-Go task and a visually-guided motor tracking task (triple task). Performance on all tasks showed substantial deterioration during exposure to sleep deprivation. A significant interaction was observed between task load and time since wake on auditory Go/No-Go task performance, with greater impairment in response times and accuracy during extended wakefulness. Our results suggest that the ability to divide attention between multiple tasks is impaired during exposure to sleep deprivation. These findings have potential implications for occupations that require multi-tasking combined with long work hours and exposure to sleep loss. PMID:29166387

Effects of total sleep deprivation on divided attention performance.

PubMed

Chua, Eric Chern-Pin; Fang, Eric; Gooley, Joshua J

2017-01-01

Dividing attention across two tasks performed simultaneously usually results in impaired performance on one or both tasks. Most studies have found no difference in the dual-task cost of dividing attention in rested and sleep-deprived states. We hypothesized that, for a divided attention task that is highly cognitively-demanding, performance would show greater impairment during exposure to sleep deprivation. A group of 30 healthy males aged 21-30 years was exposed to 40 h of continuous wakefulness in a laboratory setting. Every 2 h, subjects completed a divided attention task comprising 3 blocks in which an auditory Go/No-Go task was 1) performed alone (single task); 2) performed simultaneously with a visual Go/No-Go task (dual task); and 3) performed simultaneously with both a visual Go/No-Go task and a visually-guided motor tracking task (triple task). Performance on all tasks showed substantial deterioration during exposure to sleep deprivation. A significant interaction was observed between task load and time since wake on auditory Go/No-Go task performance, with greater impairment in response times and accuracy during extended wakefulness. Our results suggest that the ability to divide attention between multiple tasks is impaired during exposure to sleep deprivation. These findings have potential implications for occupations that require multi-tasking combined with long work hours and exposure to sleep loss.

Effect of mold diameter on the depth of cure of a resin-based composite material.

PubMed

Erickson, Robert L; Barkmeier, Wayne W

2017-02-01

The purpose of this study was to examine the effect of mold diameter on depth of cure of a resin-based composite material for varying amounts of irradiation. A resin-based composite was light-cured for 10-80 s in stainless-steel molds of either 6 mm or 4 mm in diameter and then dark-stored for 24 h. Specimens were then scraped back and the length of the cured specimens was measured to provide depth of cure (D SB ). Radiant exposure to each of the mold diameters was determined by measuring the power. The D SB values using the 4-mm molds were lower than those of the 6-mm molds. The average difference between the two groups for each irradiation time was 0.45 ± 0.02 mm. A fixed depth of cure required about 39% more irradiation time for the 4-mm mold than for the 6-mm mold but 75% more radiant exposure. The difference in cure depth for a fixed radiant exposure was 0.79 mm. A better comparison of depth of cure is obtained by using identical radiant exposures for different mold diameters. It is believed that greater loss of light by absorption at the stainless-steel cylinder walls for the 4-mm-diameter cylinders accounts for the lower depth of cure when compared with the 6-mm molds. © 2017 Eur J Oral Sci.

Sustainability of radiologically contaminated territories.

PubMed

Mück, Konrad

2003-01-01

Decisions on appropriate countermeasures in the case of a contamination of large areas due to fallout from a weapon's detonations or a serious reactor or reprocessing plant accident depend on fallout level and the time period required for the exposure levels to fall below a given intervention limit. This is particularly relevant for countermeasures with high costs and substantial consequences to the population involved, such as relocation or soil perturbation. Natural processes which result in a decrease in activity concentrations in foodstuffs and external exposure with time, are least detrimental to the soil among all countermeasures proposed for rehabilitation of contaminated areas. The impact of these natural self-healing effects (soil sustainability) on the temporal activity reduction in foodstuffs, as well as their effect on the time period required for exposure levels to decrease to sufficiently low levels to allow unrestricted re-utilization and re-settlement of the land, are discussed. Depending on the type of foodstuff, in Central Europe this temporal decrease follows an effective half life of about 0.25-1.3 y from first to second year after fallout, followed by a decrease in milk with an effective half-life of 1-2 y in the next 7 y and about 5 y thereafter, while in cereals and vegetables in Austria a decrease by 2.3 y and in fruit by 1.3 y over a period of more than a decade is observed. In contrast, the decrease in foodstuffs derived from semi-natural environs is much slower by an effective half-life of roughly 8 y. The time-span for adequate recovery of a contaminated territory, therefore, depends on the fallout level and the radionuclides involved and the contribution of natural and semi-natural derived foodstuffs to the diet. It is shown that for 137Cs and a typical Central European diet the time span amounts to about 1 y for a deposition of 300 kBq m(-2) and to about 10 y for a deposition of 10,000 kBq m(-2). Thus it is demonstrated that natural restoration effects may contribute significantly to the environmentally safe and sustainable resettlement of an area substantially contaminated with fission products.

On the Performance of X-ray Imaging Plates in Gamma Radiography employing Reactor-produced Radioisotopes

NASA Astrophysics Data System (ADS)

Silvani, Maria Ines; de Almeida, Gevaldo L.; Furieri, Rosanne C.; Lopes, Ricardo T.

2011-08-01

Gamma-radiography employing radiographic films is a well established technique for non-destructive assays. The advent of X-ray sensitive Imaging Plates opens up new possibilities to apply this technique thanks to the advantages exhibited by this new device. Indeed, besides a sensitivity about 20 times higher then the conventional photographic film, requiring thus a shorter exposure time, it does not require a dark room for a cumbersome and time-consuming chemical processing associated to the development, an can be erased to be reused many times. Moreover, its development carried out by means of a laser beam produces digitalized images which can be promptly stored in a computer. Although its resolution is still poorer than that of the conventional film, those advantages overwhelms this specific parameter when it is not an essential feature for the intended application. This work evaluates the feasibility of employing X-ray Imaging Plates as detector for higher photon energies as those emitted by reactor-produced radioisotopes. Within this frame, radioisotopes such as 198Au and 56Mn, produced at the Argonauta research reactor in the Instituto de Engenharia Nuclear-CNEN have been employed as sources to acquire radiographic images of several pieces of equipment, devices and components. In order to keep the source appearance—with regard to the detector—as punctual as possible, reducing hence the penumbra effect, the mass of the irradiated material had to be limited. Therefore, due to the low neutron flux available at the main port of the reactor, the exposure times have to be extended along several hours or even a couple of days in order to reach an image with adequate contrast. This demand, nevertheless, does not constitute a serious hindrance as the exposure process can be carried out without any intervention or surveillance. Results have shown that in spite of the higher photon energies used, surpassing the X-ray range for which the imaging plates have been designed, it is feasible to use these devices for gamma-radiography.

GIS Modeling of Air Toxics Releases from TRI-Reporting and Non-TRI-Reporting Facilities: Impacts for Environmental Justice

PubMed Central

Dolinoy, Dana C.; Miranda, Marie Lynn

2004-01-01

The Toxics Release Inventory (TRI) requires facilities with 10 or more full-time employees that process > 25,000 pounds in aggregate or use > 10,000 pounds of any one TRI chemical to report releases annually. However, little is known about releases from non-TRI-reporting facilities, nor has attention been given to the very localized equity impacts associated with air toxics releases. Using geographic information systems and industrial source complex dispersion modeling, we developed methods for characterizing air releases from TRI-reporting as well as non-TRI-reporting facilities at four levels of geographic resolution. We characterized the spatial distribution and concentration of air releases from one representative industry in Durham County, North Carolina (USA). Inclusive modeling of all facilities rather than modeling of TRI sites alone significantly alters the magnitude and spatial distribution of modeled air concentrations. Modeling exposure receptors at more refined levels of geographic resolution reveals localized, neighborhood-level exposure hot spots that are not apparent at coarser geographic scales. Multivariate analysis indicates that inclusive facility modeling at fine levels of geographic resolution reveals exposure disparities by income and race. These new methods significantly enhance the ability to model air toxics, perform equity analysis, and clarify conflicts in the literature regarding environmental justice findings. This work has substantial implications for how to structure TRI reporting requirements, as well as methods and types of analysis that will successfully elucidate the spatial distribution of exposure potentials across geographic, income, and racial lines. PMID:15579419

Approach to the Treatment of Methanol Intoxication.

PubMed

Kraut, Jeffrey A

2016-07-01

Methanol intoxication is an uncommon but serious poisoning. Its adverse effects are due primarily to the impact of its major metabolite formic acid and lactic acid resulting from cellular hypoxia. Symptoms including abdominal pain and loss of vision can appear a few hours to a few days after exposure, reflecting the time necessary for accumulation of the toxic byproducts. In addition to a history of exposure, increases in serum osmolal and anion gaps can be clues to its presence. However, increments in both parameters can be absent depending on the nature of the toxic alcohol, time of exposure, and coingestion of ethanol. Definitive diagnosis requires measurement with gas or liquid chromatography, which are laborious and expensive procedures. Tests under study to detect methanol or its metabolite formate might facilitate the diagnosis of this poisoning. Treatment can include administration of ethanol or fomepizole, both inhibitors of the enzyme alcohol dehydrogenase to prevent formation of its metabolites, and hemodialysis to remove methanol and formate. In this Acid-Base and Electrolyte Teaching Case, a patient with methanol intoxication due to ingestion of model airplane fuel is described, and the value and limitations of current and new diagnostic and treatment measures are discussed. Published by Elsevier Inc.

Concentrated sodium chloride brine solutions as an additional treatment for preventing the introduction of nonindigenous species in the ballast tanks of ships declaring no ballast on board.

PubMed

Santagata, Scott; Bacela, Karolina; Reid, David F; Mclean, Kevin A; Cohen, Jill S; Cordell, Jeffery R; Brown, Christopher W; Johengen, Thomas H; Ruiz, Gregory M

2009-02-01

Currently, seawater flushing is the only management strategy for reducing the number of viable organisms in residual sediments and water of ballast tanks of vessels declaring no ballast on board (NOBOB) that traffic ports of the eastern United States. Previously, we identified several species of freshwater and brackish-water peracarid crustaceans able to survive the osmotic shock that occurs during open-ocean ballast water exchange and, potentially, to disperse over long distances via ballasted ships and NOBOB vessels. We tested the efficacy of concentrated sodium chloride brine solutions as an additional treatment for eradicating the halotolerant taxa often present in the ballast tanks of NOBOB ships. The lowest brine treatments (30 ppt for 1 h) caused 100% mortality in several species of cladocerans and copepods collected from oligohaline habitats. Several brackish-water peracarid crustaceans, however, including some that can survive in freshwater as well, required higher brine concentrations and longer exposure durations (45-60 ppt for 3-24 h). The most resilient animals were widely introduced peracarid crustaceans that generally prefer mesohaline habitats but do not tolerate freshwater (required brine treatments of 60-110 ppt for 3-24 h). Brine treatments (30 ppt) also required less time to cause 100% mortality for eight taxa compared with treatments using 34 ppt seawater. Based on these experiments and published data, we present treatment strategies for the ballast tank biota often associated with NOBOB vessels entering the Great Lakes region. We estimate the lethal dosage of brine for 95% of the species in our experiments to be 110 ppt (95% confidence interval, 85-192 ppt) when the exposure time is 1 h and 60 ppt (95% confidence interval, 48-98 ppt) when the exposure duration is 6 h or longer.

Incorporating High-Dimensional Exposure Modelling into Studies of Air Pollution and Health.

PubMed

Liu, Yi; Shaddick, Gavin; Zidek, James V

2017-01-01

Performing studies on the risks of environmental hazards on human health requires accurate estimates of exposures that might be experienced by the populations at risk. Often there will be missing data and in many epidemiological studies, the locations and times of exposure measurements and health data do not match. To a large extent this will be due to the health and exposure data having arisen from completely different data sources and not as the result of a carefully designed study, leading to problems of both 'change of support' and 'misaligned data'. In such cases, a direct comparison of the exposure and health outcome is often not possible without an underlying model to align the two in the spatial and temporal domains. The Bayesian approach provides the natural framework for such models; however, the large amounts of data that can arise from environmental networks means that inference using Markov Chain Monte Carlo might not be computationally feasible in this setting. Here we adapt the integrated nested Laplace approximation to implement spatio-temporal exposure models. We also propose methods for the integration of large-scale exposure models and health analyses. It is important that any model structure allows the correct propagation of uncertainty from the predictions of the exposure model through to the estimates of risk and associated confidence intervals. The methods are demonstrated using a case study of the levels of black smoke in the UK, measured over several decades, and respiratory mortality.

Biomarkers of exposure and dose: state of the art.

PubMed

Brooks, A L

2001-01-01

Biomarkers provide methods to measure changes in biological systems and to relate them to environmental insults and disease processes. Biomarkers can be classified as markers of exposure and dose, markers of sensitivity, and markers of disease. It is important that the differences and applications of the various types of biomarkers be clearly understood. The military is primarily interested in early biomarkers of exposure and dose that do not require high levels of sensitivity but can be used to rapidly triage war fighters under combat or terrorist conditions and determine which, if any, require medical attention. Biomarkers of long-term radiation risk represent the second area of interest for the military. Biomarkers of risk require high sensitivity and specificity for the disease and insult but do not require rapid data turnaround. Biomarkers will help provide information for quick command decisions in the field, characterise long-term troop risks and identify early stages of radiation-induced diseases. This information provides major positive reassurances about individual exposures and risk that will minimise the physical and psychological impact of wartime radiation exposures.

Comparison of modeling approaches to prioritize chemicals based on estimates of exposure and exposure potential

PubMed Central

Mitchell, Jade; Arnot, Jon A.; Jolliet, Olivier; Georgopoulos, Panos G.; Isukapalli, Sastry; Dasgupta, Surajit; Pandian, Muhilan; Wambaugh, John; Egeghy, Peter; Cohen Hubal, Elaine A.; Vallero, Daniel A.

2014-01-01

While only limited data are available to characterize the potential toxicity of over 8 million commercially available chemical substances, there is even less information available on the exposure and use-scenarios that are required to link potential toxicity to human and ecological health outcomes. Recent improvements and advances such as high throughput data gathering, high performance computational capabilities, and predictive chemical inherency methodology make this an opportune time to develop an exposure-based prioritization approach that can systematically utilize and link the asymmetrical bodies of knowledge for hazard and exposure. In response to the US EPA’s need to develop novel approaches and tools for rapidly prioritizing chemicals, a “Challenge” was issued to several exposure model developers to aid the understanding of current systems in a broader sense and to assist the US EPA’s effort to develop an approach comparable to other international efforts. A common set of chemicals were prioritized under each current approach. The results are presented herein along with a comparative analysis of the rankings of the chemicals based on metrics of exposure potential or actual exposure estimates. The analysis illustrates the similarities and differences across the domains of information incorporated in each modeling approach. The overall findings indicate a need to reconcile exposures from diffuse, indirect sources (far-field) with exposures from directly, applied chemicals in consumer products or resulting from the presence of a chemical in a microenvironment like a home or vehicle. Additionally, the exposure scenario, including the mode of entry into the environment (i.e. through air, water or sediment) appears to be an important determinant of the level of agreement between modeling approaches. PMID:23707726

Comparison of modeling approaches to prioritize chemicals based on estimates of exposure and exposure potential.

PubMed

Mitchell, Jade; Arnot, Jon A; Jolliet, Olivier; Georgopoulos, Panos G; Isukapalli, Sastry; Dasgupta, Surajit; Pandian, Muhilan; Wambaugh, John; Egeghy, Peter; Cohen Hubal, Elaine A; Vallero, Daniel A

2013-08-01

While only limited data are available to characterize the potential toxicity of over 8 million commercially available chemical substances, there is even less information available on the exposure and use-scenarios that are required to link potential toxicity to human and ecological health outcomes. Recent improvements and advances such as high throughput data gathering, high performance computational capabilities, and predictive chemical inherency methodology make this an opportune time to develop an exposure-based prioritization approach that can systematically utilize and link the asymmetrical bodies of knowledge for hazard and exposure. In response to the US EPA's need to develop novel approaches and tools for rapidly prioritizing chemicals, a "Challenge" was issued to several exposure model developers to aid the understanding of current systems in a broader sense and to assist the US EPA's effort to develop an approach comparable to other international efforts. A common set of chemicals were prioritized under each current approach. The results are presented herein along with a comparative analysis of the rankings of the chemicals based on metrics of exposure potential or actual exposure estimates. The analysis illustrates the similarities and differences across the domains of information incorporated in each modeling approach. The overall findings indicate a need to reconcile exposures from diffuse, indirect sources (far-field) with exposures from directly, applied chemicals in consumer products or resulting from the presence of a chemical in a microenvironment like a home or vehicle. Additionally, the exposure scenario, including the mode of entry into the environment (i.e. through air, water or sediment) appears to be an important determinant of the level of agreement between modeling approaches. Copyright © 2013 Elsevier B.V. All rights reserved.

Working conditions and occupational risk exposure in employees driving for work.

PubMed

Fort, Emmanuel; Ndagire, Sheba; Gadegbeku, Blandine; Hours, Martine; Charbotel, Barbara

2016-04-01

An analysis of the occupational constraints and exposures to which employees facing road risk at work are subject was performed, with comparison versus non-exposed employees. Objective was to improve knowledge of the characteristics of workers exposed to road risk in France and of the concomitant occupational constraints. The descriptive study was based on data from the 2010 SUMER survey (Medical Monitoring of Occupational Risk Exposure: Surveillance Médicale des Expositions aux Risques professionnels), which included data not only on road risk exposure at work but also on a range of socio-occupational factors and working conditions. The main variable of interest was "driving (car, truck, bus, coach, etc.) on public thoroughfares" for work (during the last week of work). This was a dichotomous "Yes/No" variable, distinguishing employees who drove for work; it also comprised 4-step weekly exposure duration: <2h, 2-10h, 10-20h and ≥20h. 75% of the employees with driving exposure were male. Certain socio-occupational categories were found significantly more frequently: professional drivers (INSEE occupations and socio-occupational categories (PCS) 64), skilled workers (PCS 61), intermediate professions and teaching, health, civil service (functionaries) and assimilated (PCS 46) and company executives (PCS 36). Employees with driving exposure more often worked in small businesses or establishments. Constraints in terms of schedule and work-time were more frequent in employees with driving exposure. Constraints in terms of work rhythm were more frequent in non-exposed employees, with the exception of external demands requiring immediate response. On the Karasek's Job Demand-Control Model, employees with driving exposure less often had low decision latitude. Prevalence of job-strain was also lower, as was prevalence of "iso-strain" (combination of job-strain and social isolation). Employees with driving exposure were less often concerned by hostile behavior and, when they did report such psychological violence (inspired on the Leymann questionnaire), it was significantly more frequently due to clients, users or patients. Employees with driving exposure at work showed several specificities. The present study, based on a representative nationwide survey of employees, confirmed the existence of differences in working conditions between employees with and without driving exposure at work. In employees with driving exposure, constraints in terms of work-time and rhythm increased with weekly exposure duration, as did tension at work and exposure to hostile behavior. Copyright © 2016 Elsevier Ltd. All rights reserved.

Automatic tracking of cells for video microscopy in patch clamp experiments

PubMed Central

2014-01-01

Background Visualisation of neurons labeled with fluorescent proteins or compounds generally require exposure to intense light for a relatively long period of time, often leading to bleaching of the fluorescent probe and photodamage of the tissue. Here we created a technique to drastically shorten light exposure and improve the targeting of fluorescent labeled cells that is specially useful for patch-clamp recordings. We applied image tracking and mask overlay to reduce the time of fluorescence exposure and minimise mistakes when identifying neurons. Methods Neurons are first identified according to visual criteria (e.g. fluorescence protein expression, shape, viability etc.) and a transmission microscopy image Differential Interference Contrast (DIC) or Dodt contrast containing the cell used as a reference for the tracking algorithm. A fluorescence image can also be acquired later to be used as a mask (that can be overlaid on the target during live transmission video). As patch-clamp experiments require translating the microscope stage, we used pattern matching to track reference neurons in order to move the fluorescence mask to match the new position of the objective in relation to the sample. For the image processing we used the Open Source Computer Vision (OpenCV) library, including the Speeded-Up Robust Features (SURF) for tracking cells. The dataset of images (n = 720) was analyzed under normal conditions of acquisition and with influence of noise (defocusing and brightness). Results We validated the method in dissociated neuronal cultures and fresh brain slices expressing Enhanced Yellow Fluorescent Protein (eYFP) or Tandem Dimer Tomato (tdTomato) proteins, which considerably decreased the exposure to fluorescence excitation, thereby minimising photodamage. We also show that the neuron tracking can be used in differential interference contrast or Dodt contrast microscopy. Conclusion The techniques of digital image processing used in this work are an important addition to the set of microscopy tools used in modern electrophysiology, specially in experiments with neuron cultures and brain slices. PMID:24946774

Automatic tracking of cells for video microscopy in patch clamp experiments.

PubMed

Peixoto, Helton M; Munguba, Hermany; Cruz, Rossana M S; Guerreiro, Ana M G; Leao, Richardson N

2014-06-20

Visualisation of neurons labeled with fluorescent proteins or compounds generally require exposure to intense light for a relatively long period of time, often leading to bleaching of the fluorescent probe and photodamage of the tissue. Here we created a technique to drastically shorten light exposure and improve the targeting of fluorescent labeled cells that is specially useful for patch-clamp recordings. We applied image tracking and mask overlay to reduce the time of fluorescence exposure and minimise mistakes when identifying neurons. Neurons are first identified according to visual criteria (e.g. fluorescence protein expression, shape, viability etc.) and a transmission microscopy image Differential Interference Contrast (DIC) or Dodt contrast containing the cell used as a reference for the tracking algorithm. A fluorescence image can also be acquired later to be used as a mask (that can be overlaid on the target during live transmission video). As patch-clamp experiments require translating the microscope stage, we used pattern matching to track reference neurons in order to move the fluorescence mask to match the new position of the objective in relation to the sample. For the image processing we used the Open Source Computer Vision (OpenCV) library, including the Speeded-Up Robust Features (SURF) for tracking cells. The dataset of images (n = 720) was analyzed under normal conditions of acquisition and with influence of noise (defocusing and brightness). We validated the method in dissociated neuronal cultures and fresh brain slices expressing Enhanced Yellow Fluorescent Protein (eYFP) or Tandem Dimer Tomato (tdTomato) proteins, which considerably decreased the exposure to fluorescence excitation, thereby minimising photodamage. We also show that the neuron tracking can be used in differential interference contrast or Dodt contrast microscopy. The techniques of digital image processing used in this work are an important addition to the set of microscopy tools used in modern electrophysiology, specially in experiments with neuron cultures and brain slices.

Development and implementation of a pharmacist-run comprehensive medication review program in Wisconsin.

PubMed

Schoenrock, Danielle L; Hartkopf, Katherine; Boeckelman, Carrie

2016-12-01

The development and implementation of a centralized, pharmacist-run population health program were pursued within a health system to increase patient exposure to comprehensive medication reviews (CMRs) and improve visit processes. Program implementation included choosing appropriate pilot pharmacy locations, developing a feasible staffing model, standardizing the workflow, and creating a patient referral process. The impact on patient exposure, specific interventions, and the sustainability of the program were evaluated over a seven-month period. A total of 96 CMRs were scheduled during the data collection period. Attendance at scheduled CMRs was 54% (52 visits); there were 25 cancellations (26%) and 19 no-shows (20%). Since program implementation, there has been more than a twofold increase (2.08) in the number of CMRs completed within the health system. On average, all aspects of each patient visit took 1.78 hours to complete. Pharmacists spent 28% of scheduled time on CMR tasks and 72% of time on telephone calls and technical tasks to maintain appointments. A pharmacist-run CMR program helped to elevate the role of the community pharmacist in a health system and to improve patient exposure to CMRs. Sustaining a centralized CMR program requires support from other members of the health-system team so that pharmacists can spend more time providing patient care and less time on the technical tasks involved. Copyright © 2016 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

METHODS STUDIES FOR THE NATIONAL CHILDREN'S STUDY: SEMIPERMEABLE MEMBRANE DEVICE (SPMD)

EPA Science Inventory

Accurate exposure classification tools are required to link exposure with health effects in epidemiological studies. Although long-term integrated exposure measurements are a critical component of exposure assessment, the ability to include these measurements into epidemiologic...

METHODS STUDIES FOR THE NATIONAL CHILDREN'S STUDY: MOLECULARLY IMPRINTED POLYMERS

EPA Science Inventory

Accurate exposure classification tools are required to link exposure with health effects in epidemiological studies. Although long-term integrated exposure measurements are a critical component of exposure assessment, the ability to include these measurements into epidemiologic...

Do PCDD/PCDF standard solutions used in dioxin analysis pose a risk as potentially acutely toxic to lab personnel?

PubMed

Malisch, Rainer; Denison, Michael S; Fiedler, Heidelore; Fürst, Peter; Hoogenboom, Ron L A P; Schaechtele, Alexander; Schrenk, Dieter; van den Berg, Martin

2017-10-01

Laboratory safety requires protecting personnel from chemical exposures. Working with stock solutions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs) in routine analysis of feed and food with bioanalytical or physicochemical methods raises some concerns. Since PCDD/PCDFs are considered as possibly acutely toxic, the potential risks were evaluated to determine whether supervision of their use is necessary. Based on LD 50 -data for oral or dermal intake, hazard classification of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) as a substance (category 1) and in commercially available TCDD standard solutions (category 4) is different. As worst case exposure scenario during routine laboratory work it was assumed that a dose of 100 ng TCDD gets onto the skin and is absorbed. This would result in the total body burden of a 70 kg person with 15 kg fat increasing from 10 (upper range of current background levels) to ∼17 pg of toxic equivalents (TEQs) of PCDD/PCDFs per g lipid, a level commonly observed over past decades. Chloracne, the main acute effect occurring weeks after exposure, is observed at much higher blood concentrations than estimated from accidental laboratory exposure. Immunotoxicity, developmental effects and other toxic effects may occur at lower blood levels, but require longer periods to develop. Since acute toxic symptoms don't occur within an "8 h acute time window", no supervision is necessary when working with standard solutions in routine analysis. Nevertheless, precautionary measures are needed regarding long-term adverse health effects and appropriate workplace conditions must exist to ensure that additional occupational exposure to PCDD/PCDFs by laboratory personnel is negligible. Copyright © 2017 Elsevier Ltd. All rights reserved.

Intercostal high intensity focused ultrasound for liver ablation: The influence of beam shaping on sonication efficacy and near-field risks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greef, M. de, E-mail: m.degreef@umcutrecht.nl; Wijlemans, J. W.; Bartels, L. W.

2015-08-15

Purpose: One of the major issues in high intensity focused ultrasound ablation of abdominal lesions is obstruction of the ultrasound beam by the thoracic cage. Beam shaping strategies have been shown by several authors to increase focal point intensity while limiting rib exposure. However, as rib obstruction leaves only part of the aperture available for energy transmission, conserving total emitted acoustic power, the intensity in the near-field tissues inherently increases after beam shaping. Despite of effective rib sparing, those tissues are therefore subjected to increased risk of thermal damage. In this study, for a number of clinically representative intercostal sonicationmore » geometries, modeling clinically available hardware, the effect of beam shaping on both the exposure of the ribs and near-field to acoustic energy was evaluated and the implications for the volumetric ablation rate were addressed. Methods: A relationship between rib temperature rise and acoustic energy density was established by means of in vivo MR thermometry and simulations of the incident acoustic energy for the corresponding anatomies. This relationship was used for interpretation of rib exposure in subsequent numerical simulations in which rib spacing, focal point placement, and the focal point trajectory were varied. The time required to heat a targeted region to 65 °C was determined without and with the application of beam shaping. The required sonication time was used to calculate the acoustic energy density at the fat–muscle interface and at the surface of the ribs. At the fat–muscle interface, exposure was compared to available literature data and rib exposure was interpreted based on the earlier obtained relation between measured temperature rise and simulated acoustic energy density. To estimate the volumetric ablation rate, the cool-down time between periods of energy exposure was estimated using a time-averaged power limit of 100 kJ/h. Results: At the level of the ribs, the temperature rise–energy density proportionality constant was estimated to be 6.0–7.6 °C/(J/mm{sup 2}). Beam shaping by the geometric shadow method typically reduces the acoustic intensity a factor of 2, considering the 1 cm{sup 2} with the highest exposure. For a 4 mm diameter circular sonication trajectory, the near-field energy limit of 2.5 J/mm{sup 2} was exceeded for all considered geometries. The estimated rib temperature was in all but one (sonication 50 mm behind the ribs, with 15 mm rib spacing and a 4 mm diameter circular sonication trajectory) of the considered scenarios within acceptable limits. For those sonication scenarios where a single sonication is considered safe both in terms of near-field as well as rib heating, volumetric ablation rates in the order of 1 ml/h are estimated. Conclusions: Intercostal sonication is associated with an increased risk of near-field overheating. This risk is strongly dependent on the considered rib spacing, the placement of the focus behind the ribs, and the selected sonication trajectory. For the hardware under simulation, obstruction by the thoracic cage renders ablations of clinically relevant volumes within a practical time-frame unfeasible in a large part of the liver. Improvements maybe expected from transducer designs with a larger active surface and/or nonlinear sonication strategies.« less

40 CFR 158.1060 - Post-application exposure-criteria for testing

Code of Federal Regulations, 2012 CFR

2012-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1060 Post-application exposure...) Occupational human post-application exposure to pesticide residues on plants or in soil could occur as the...) Residential human post-application exposure to pesticide residues on plants or in soil could occur. Such uses...

40 CFR 158.1060 - Post-application exposure-criteria for testing

Code of Federal Regulations, 2011 CFR

2011-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1060 Post-application exposure...) Occupational human post-application exposure to pesticide residues on plants or in soil could occur as the...) Residential human post-application exposure to pesticide residues on plants or in soil could occur. Such uses...

40 CFR 158.1060 - Post-application exposure-criteria for testing.

Code of Federal Regulations, 2014 CFR

2014-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1060 Post-application exposure...) Occupational human post-application exposure to pesticide residues on plants or in soil could occur as the...) Residential human post-application exposure to pesticide residues on plants or in soil could occur. Such uses...

40 CFR 158.1060 - Post-application exposure-criteria for testing

Code of Federal Regulations, 2010 CFR

2010-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1060 Post-application exposure...) Occupational human post-application exposure to pesticide residues on plants or in soil could occur as the...) Residential human post-application exposure to pesticide residues on plants or in soil could occur. Such uses...

40 CFR 158.1060 - Post-application exposure-criteria for testing.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Human Exposure § 158.1060 Post-application exposure...) Occupational human post-application exposure to pesticide residues on plants or in soil could occur as the...) Residential human post-application exposure to pesticide residues on plants or in soil could occur. Such uses...

PROTECTING OUR CHILDREN FROM HARM: MEASURING ENVIRONMENTAL RISKS TO CHILDREN REQUIRES UNDERSTANDING THEIR UNIQUE MEANS OF EXPOSURE

EPA Science Inventory

Children's exposures to consumer products and environmental contaminants are expected to be different and, in some cases, much higher than adult's exposures. The objectives of our children's exposure research at the National Exposure Research Laboratory are to make use of exis...

Safety assessment in macaques of light exposures for functional two-photon ophthalmoscopy in humans

PubMed Central

Schwarz, Christina; Sharma, Robin; Fischer, William S.; Chung, Mina; Palczewska, Grazyna; Palczewski, Krzysztof; Williams, David R.; Hunter, Jennifer J.

2016-01-01

Two-photon ophthalmoscopy has potential for in vivo assessment of function of normal and diseased retina. However, light safety of the sub-100 fs laser typically used is a major concern and safety standards are not well established. To test the feasibility of safe in vivo two-photon excitation fluorescence (TPEF) imaging of photoreceptors in humans, we examined the effects of ultrashort pulsed light and the required light levels with a variety of clinical and high resolution imaging methods in macaques. The only measure that revealed a significant effect due to exposure to pulsed light within existing safety standards was infrared autofluorescence (IRAF) intensity. No other structural or functional alterations were detected by other imaging techniques for any of the exposures. Photoreceptors and retinal pigment epithelium appeared normal in adaptive optics images. No effect of repeated exposures on TPEF time course was detected, suggesting that visual cycle function was maintained. If IRAF reduction is hazardous, it is the only hurdle to applying two-photon retinal imaging in humans. To date, no harmful effects of IRAF reduction have been detected. PMID:28018732

PCB remediation in schools: a review.

PubMed

Brown, Kathleen W; Minegishi, Taeko; Cummiskey, Cynthia Campisano; Fragala, Matt A; Hartman, Ross; MacIntosh, David L

2016-02-01

Growing awareness of polychlorinated biphenyls (PCBs) in legacy caulk and other construction materials of schools has created a need for information on best practices to control human exposures and comply with applicable regulations. A concise review of approaches and techniques for management of building-related PCBs is the focus of this paper. Engineering and administrative controls that block pathways of PCB transport, dilute concentrations of PCBs in indoor air or other exposure media, or establish uses of building space that mitigate exposure can be effective initial responses to identification of PCBs in a building. Mitigation measures also provide time for school officials to plan a longer-term remediation strategy and to secure the necessary resources. These longer-term strategies typically involve removal of caulk or other primary sources of PCBs as well as nearby masonry or other materials contaminated with PCBs by the primary sources. The costs of managing PCB-containing building materials from assessment through ultimate disposal can be substantial. Optimizing the efficacy and cost-effectiveness of remediation programs requires aligning a thorough understanding of sources and exposure pathways with the most appropriate mitigation and abatement methods.

Guidance on health effects of toxic chemicals. Safety Analysis Report Update Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foust, C.B.; Griffin, G.D.; Munro, N.B.

1994-02-01

Martin Marietta Energy Systems, Inc. (MMES), and Martin Marietta Utility Services, Inc. (MMUS), are engaged in phased programs to update the safety documentation for the existing US Department of Energy (DOE)-owned facilities. The safety analysis of potential toxic hazards requires a methodology for evaluating human health effects of predicted toxic exposures. This report provides a consistent set of health effects and documents toxicity estimates corresponding to these health effects for some of the more important chemicals found within MMES and MMUS. The estimates are based on published toxicity information and apply to acute exposures for an ``average`` individual. The healthmore » effects (toxicological endpoints) used in this report are (1) the detection threshold; (2) the no-observed adverse effect level; (3) the onset of irritation/reversible effects; (4) the onset of irreversible effects; and (5) a lethal exposure, defined to be the 50% lethal level. An irreversible effect is defined as a significant effect on a person`s quality of life, e.g., serious injury. Predicted consequences are evaluated on the basis of concentration and exposure time.« less

An empirical analysis of thermal protective performance of fabrics used in protective clothing.

PubMed

Mandal, Sumit; Song, Guowen

2014-10-01

Fabric-based protective clothing is widely used for occupational safety of firefighters/industrial workers. The aim of this paper is to study thermal protective performance provided by fabric systems and to propose an effective model for predicting the thermal protective performance under various thermal exposures. Different fabric systems that are commonly used to manufacture thermal protective clothing were selected. Laboratory simulations of the various thermal exposures were created to evaluate the protective performance of the selected fabric systems in terms of time required to generate second-degree burns. Through the characterization of selected fabric systems in a particular thermal exposure, various factors affecting the performances were statistically analyzed. The key factors for a particular thermal exposure were recognized based on the t-test analysis. Using these key factors, the performance predictive multiple linear regression and artificial neural network (ANN) models were developed and compared. The identified best-fit ANN models provide a basic tool to study thermal protective performance of a fabric. © The Author 2014. Published by Oxford University Press on behalf of the British Occupational Hygiene Society.

Assessing the Impact of Exposure Time and Incapacitation on Longitudinal Trajectories of Criminal Offending.

ERIC Educational Resources Information Center

Piquero, Alex; Blumstein, Alfred; Brame, Robert; Haapanen, Rudy; Mulvey, Edward P.; Nagin, Daniel S.

2001-01-01

Examined effect of accounting for exposure (incarceration) time on arrest rate of 272 paroled serious offenders followed through age 33. Analysis without exposure time adjustments suggested that over 92 percent exhibited highest arrest activity in late teens and early 20s. Adjusted for exposure time, about 72 percent showed a decline in arrest…

Label-free imaging to study phenotypic behavioural traits of cells in complex co-cultures

NASA Astrophysics Data System (ADS)

Suman, Rakesh; Smith, Gabrielle; Hazel, Kathryn E. A.; Kasprowicz, Richard; Coles, Mark; O'Toole, Peter; Chawla, Sangeeta

2016-02-01

Time-lapse imaging is a fundamental tool for studying cellular behaviours, however studies of primary cells in complex co-culture environments often requires fluorescent labelling and significant light exposure that can perturb their natural function over time. Here, we describe ptychographic phase imaging that permits prolonged label-free time-lapse imaging of microglia in the presence of neurons and astrocytes, which better resembles in vivo microenvironments. We demonstrate the use of ptychography as an assay to study the phenotypic behaviour of microglial cells in primary neuronal co-cultures through the addition of cyclosporine A, a potent immune-modulator.

Cerium Oxide Nanoparticle Nose-Only Inhalation Exposures ...

EPA Pesticide Factsheets

There is a critical need to assess the health effects associated with exposure of commercially produced NPs across the size ranges reflective of that detected in the industrial sectors that are generating, as well as incorporating, NPs into products. Generation of stable and low concentrations of size-fractionated nanoscale aerosols in nose-only chambers can be difficult, and when the aerosol agglomerates during generation, the problems are significantly increased. One problem is that many nanoscale aerosol generators have higher aerosol output and/or airflow than can be accommodated by a nose-only inhalation chamber, requiring much of the generated aerosol to be diverted to exhaust. Another problem is that mixing vessels used to modulate the fluctuating output from aerosol generators can cause substantial wall losses, consuming much of the generated aerosol. Other available aerosol generation systems can produce nanoscale aerosols from nanoparticles (NPs), however these NPs are generated in real time and do not approximate the physical and chemical characteristics of NPs that are commercially produced exposing the workers and the public. The health effects associated with exposure to commercial NP production, which are more morphologically and size heterogeneous, is required for risk assessment. To overcome these problems, a low-consumption dry-particulate nanoscale aerosol generator was developed to deliver stable concentrations in the range of 10–5000 µg

In Vivo and In Vitro Nitinol Corrosion Properties

NASA Astrophysics Data System (ADS)

Lonn, Melissa K.; Metcalf, Justin M.; Choules, Brian D.

2015-09-01

Regulatory authorities often require in vitro testing on medical devices prior to approval. Current standardized corrosion testing methods (ASTM F2129) require testing in a non-physiologic, de-oxygenated solution for a pre-exposure time of ≤1 h; however, no correlations between the prescribed simulated environment and whole blood conditions have been elucidated. This study compared open circuit potential (OCP), breakdown potentials (Eb), Eb - OCP, and cyclic polarization curves tested in vivo (OCP only) and in vitro in whole blood to those tested in phosphate-buffered saline (PBS). Two oxide thicknesses of Nitinol, two solution oxygen contents (deaerated and aerated solutions), and two pre-exposure durations (acute and chronic) were investigated. The in vitro OCP in whole blood was not significantly different than the in vivo OCP, suggesting that whole blood in vitro can be used to determine baseline corrosion behavior of medical implants. Eb - OCP tested per ASTM F2129 was comparable to acute whole blood and was conservative compared to chronic whole blood for both oxide thicknesses. However, OCP, Eb, and cyclic polarization curves were not always comparable to whole blood. Testing in aerated PBS achieved Eb, Eb - OCP, and cyclic polarization curves that were comparable to or more conservative than whole blood testing, regardless of pre-exposure duration and oxide thickness.

The effect of personalized versus standard patient protocols for radiostereometric analysis (RSA).

PubMed

Muharemovic, O; Troelsen, A; Thomsen, M G; Kallemose, T; Gosvig, K K

2018-05-01

Increasing pressure in the clinic requires a more standardized approach to radiostereometric analysis (RSA) imaging. The aim of this study was to investigate whether implementation of personalized RSA patient protocols could increase image quality and decrease examination time and the number of exposure repetitions. Forty patients undergoing primary total hip arthroplasty were equally randomized to either a case or a control group. Radiographers in the case group were assisted by personalized patient protocols containing information about each patient's post-operative RSA imaging. Radiographers in the control group used a standard RSA protocol. At three months, radiographers in the case group significantly reduced (p < 0.001) the number of exposures by 1.6, examination time with 19.2 min, and distance between centrum of prosthesis and centrum of calibration field with 34.1 mm when compared to post-operative (baseline) results. At twelve months, the case group significantly reduced (p < 0.001) number of exposures by two, examination time with 22.5 min, and centrum of prosthesis to centrum of calibration field distance with 43.1 mm when compared to baseline results. No significant improvements were found in the control group at any time point. There is strong evidence that personalized RSA patient protocols have a positive effect on image quality and radiation dose savings. Implementation of personal patient protocols as a RSA standard will contribute to the reduction of examination time, thus ensuring a cost benefit for department and patient safety. Copyright © 2017 The College of Radiographers. Published by Elsevier Ltd. All rights reserved.

A classical regression framework for mediation analysis: fitting one model to estimate mediation effects.

PubMed

Saunders, Christina T; Blume, Jeffrey D

2017-10-26

Mediation analysis explores the degree to which an exposure's effect on an outcome is diverted through a mediating variable. We describe a classical regression framework for conducting mediation analyses in which estimates of causal mediation effects and their variance are obtained from the fit of a single regression model. The vector of changes in exposure pathway coefficients, which we named the essential mediation components (EMCs), is used to estimate standard causal mediation effects. Because these effects are often simple functions of the EMCs, an analytical expression for their model-based variance follows directly. Given this formula, it is instructive to revisit the performance of routinely used variance approximations (e.g., delta method and resampling methods). Requiring the fit of only one model reduces the computation time required for complex mediation analyses and permits the use of a rich suite of regression tools that are not easily implemented on a system of three equations, as would be required in the Baron-Kenny framework. Using data from the BRAIN-ICU study, we provide examples to illustrate the advantages of this framework and compare it with the existing approaches. © The Author 2017. Published by Oxford University Press.

Uptake of a Dashboard Designed to Give Realtime Feedback to a Sentinel Network About Key Data Required for Influenza Vaccine Effectiveness Studies.

PubMed

Pathirannehelage, Sameera; Kumarapeli, Pushpa; Byford, Rachel; Yonova, Ivelina; Ferreira, Filipa; de Lusignan, Simon

2018-01-01

Dashboards are technologies that bringing together a range of data sources for observational or analytical purposes. We have created a customised dashboard that includes all the key data elements required for monitoring flu vaccine effectiveness (FVE). This delivers a unique dashboard for each primary care provider (general practice) providing data to the Royal College of General Practitioners (RCGP) Research and Surveillance Centre (RSC), one of the oldest European surveillance systems. These FVE studies use a test negative case control (TNCC) design. TNCC requires knowledge of practice denominator; vaccine exposure, and results of influenza virology swabs carried out to identify in an influenza-like-illness (ILI), a clinical diagnosis, really is influenza. The dashboard displays the denominator uploaded each week into the surveillance system, compared with the nationally known practice size (providing face-validity for the denominator); it identifies those exposed to the vaccine (by age group and risk category) and virology specimens taken and missed opportunities for surveillance (again by category). All sentinel practices can access in near real time (4 working days in areas) their rates of vaccine exposure and swabs conducted. Initial feedback is positive; 80% (32/40) practices responded positively.

Personal carbon monoxide exposure in Helsinki, Finland

NASA Astrophysics Data System (ADS)

Scotto di Marco, Greta; Kephalopoulos, Stylianos; Ruuskanen, Juhani; Jantunen, Matti

Personal exposure concentrations of carbon monoxide (CO) were measured for the adult urban population of Helsinki, Finland, as part of the multi-centre European EXPOLIS study. The arithmetic mean of the 48 h average personal CO exposure concentration was 1.3 mg m -3 for participants not exposed to environmental tobacco smoke (ETS) and 1.6 mg m -3 for those exposed to ETS at any time and in any microenvironment. The maximum 8 and 1 h exposure values were 2.0 and 2.6 mg m -3, and 4.3 and 5.7 mg m -3, respectively. As tobacco smoke is one of the major sources of CO, therefore the personal mean exposures of ETS participants were higher than the non-ETS participants for all averaging times. The long- and short-term personal exposures were higher in winter than in summer for all participants. In order to analyse in more detail the correlation between the time-activity patterns and exposure levels, cluster analysis was performed using 24 h personal exposure profiles of 1 h moving averages. The results showed clearly that the major source of CO for non-ETS exposed participants are traffic emissions. The majority of the diurnal exposure profiles showed two notable exposure peaks corresponding to the morning and evening traffic rush hours. The time spent in street traffic was the most relevant factor for describing the short-term personal exposures. The more time was spent commuting by car the higher were the exposures. The long-term exposure levels were linked both to the time spent commuting and home location. People living in low-traffic suburban areas and working in downtown spent more time commuting and ended up experiencing similar long-term exposure levels than people who lived in heavy-traffic downtown areas, but spent little time commuting. For ETS exposed participants the personal exposure profiles were dominated by both tobacco smoke and traffic emissions.

Molecular films associated with LDEF

NASA Technical Reports Server (NTRS)

Crutcher, E. R.; Warner, K. J.

1992-01-01

The molecular films deposited on the surface of the Long Duration Exposure Facility (LDEF) originated from the paints and room-temperature-vulcanized (RTV) silicone materials intentionally used on the satellite and not from residual contaminants. The high silicone content of most of the films and the uniformity of the films indicates a homogenization process in the molecular deposition and suggests a chemically most favored composition for the final film. The deposition on interior surfaces and vents indicated multiple bounce trajectories or repeated deposition-reemission cycles. Exterior surface deposits indicated a significant return flux. Ultraviolet light exposure was required to fix the deposited film as is indicated by the distribution of the films on interior surfaces and the thickness of films at the vent locations. Thermal conditions at the time of exposure to ultraviolet light seems to be an important factor in the thickness of the deposit. Sunrise facing (ram direction) surfaces always had the thicker film. These were the coldest surfaces at the time of their exposure to ultraviolet light. The films have a layered structure suggesting cyclic deposition. As many as 34 distinct layers were seen in the films. The cyclic nature of the deposition and the chemical uniformity of the film one layer to the next suggest an early deposition of the films though there is evidence for the deposition of molecular films throughout the nearly six year exposure of the satellite. A final 'spray' of an organic material associated with water soluble salts occurred very late in the mission. This may have been the result of one of the shuttle dump activities.

Child Care Exposure Influences Childhood Adiposity at 2 Years: Analysis from the ROLO Study.

PubMed

Scully, Helena; Alberdi, Goiuri; Segurado, Ricardo; McNamara, Aoife; Lindsay, Karen; Horan, Mary; Hennessy, Eilis; Gibney, Eileen; McAuliffe, Fionnuala

2017-04-01

The first 2 years of life are instrumental for childhood physical development. Factors contributing to childhood obesity are difficult to determine; child care exposure is one to consider, by influencing food preference and physical activity development. To investigate the association of child care exposure with adiposity at 2 years. Data were collected as part of the secondary analysis of the prospective ROLO study (randomized control trial of low glycemic index diet) in Dublin, Ireland. Mothers were recruited antenatally and followed up at 2 years postpartum. Maternal and childhood anthropometric data and lifestyle questionnaires, reporting on child care attendance (defined as nonparental care), exposure (weeks), and infant-feeding practices, were collected. Anthropometric measures and lifestyle data were collected for 273 mothers and children aged 2 years, 52.7% of whom attended child care. Child care was predominately provided by a nonrelative (83.7%), either in a crèche (57%) or by a childminder (26.7%). More than half (56.2%) of the children attended child care part-time (≤30 hours/week). Central adiposity measures (abdominal circumference, waist:height ratio) and total adiposity (sum of all skin folds) were significantly elevated in children with increasing time in child care. Children provided with "meals and snacks" had elevated adiposity measures versus those given "snacks or no food." No difference in the infant-feeding practices was identified between the child care groups. Children attending child care have higher total and central adiposity, proportional to exposure. More research is required to investigate this link to appropriately design health promotion and obesity prevention programs targeting children at 2 years.

Cholinesterase Structure: Identification of Mechanisms and Residues Involved in Organophosphate Inhibition and Enzyme Reactivation

DTIC Science & Technology

2005-05-01

nerve agents , soman is the great- terrorist acts. At the same time, OP pesticides , such as est challenge since both the rapid aging of the soman- paraoxon...also from enzyme very slowly (requiring hours, days, or weeks used as nerve warfare agents . Similar to pesticides , nerve for complete dissociation...TERMS acetylcholinesterase, nerve agent antidotes and propylaxis, organophosphate scavenging , oxime reactivation fluorescence spectroscopy, exposure

A rapid method for quantification of 242Pu in urine using extraction chromatography and ICP-MS

DOE PAGES

Gallardo, Athena Marie; Than, Chit; Wong, Carolyn; ...

2017-01-01

Occupational exposure to plutonium is generally monitored through analysis of urine samples. Typically, plutonium is separated from the sample and other actinides, and the concentration is determined using alpha spectroscopy. Current methods for separations and analysis are lengthy and require long count times. A new method for monitoring occupational exposure levels of plutonium has been developed, which requires fewer steps and overall less time than the alpha spectroscopy method. In this method, the urine is acidified, and a 239Pu internal standard is added. The urine is digested in a microwave oven, and plutonium is separated using an Eichrom TRU Resinmore » column. The plutonium is eluted, and the eluant is injected directly into the Inductively Coupled Plasma–Mass Spectrometer (ICP-MS). Compared to a direct “dilute and shoot” method, a 30-fold improvement in sensitivity is achieved. This method was validated by analyzing several batches of spiked samples. Based on these analyses, a combined standard uncertainty plot, which relates uncertainty to concentration, was produced. As a result, the MDA 95 was calculated to be 7.0 × 10 –7 μg L –1, and the Lc95 was calculated to be 3.5 × 10 –7 μg L –1 for this method.« less

Epidemiologic Tools to Study the Influence of Environmental Factors on Fecundity and Pregnancy-related Outcomes

PubMed Central

Slama, Rémy; Ballester, Ferran; Casas, Maribel; Cordier, Sylvaine; Eggesbø, Merete; Iniguez, Carmen; Nieuwenhuijsen, Mark; Philippat, Claire; Rey, Sylvie; Vandentorren, Stéphanie; Vrijheid, Martine

2014-01-01

Adverse pregnancy outcomes entail a large health burden for the mother and offspring; a part of it might be avoided by better understanding the role of environmental factors in their etiology. Our aims were to review the assessment tools to characterize fecundity troubles and pregnancy-related outcomes in human populations and their sensitivity to environmental factors. For each outcome, we reviewed the possible study designs, main sources of bias, and their suggested cures. In terms of study design, for most pregnancy outcomes, cohorts with recruitment early during or even before pregnancy allow efficient characterization of pregnancy-related events, time-varying confounders, and in utero exposures that may impact birth outcomes and child health. Studies on congenital anomalies require specific designs, assessment of anomalies in medical pregnancy terminations, and, for congenital anomalies diagnosed postnatally, follow-up during several months after birth. Statistical analyses should take into account environmental exposures during the relevant time windows; survival models are an appropriate approach for fecundity, fetal loss, and gestational duration/preterm delivery. Analysis of gestational duration could distinguish pregnancies according to delivery induction (and possibly pregnancy-related conditions). In conclusion, careful design and analysis are required to better characterize environmental effects on human reproduction. PMID:24363355

Extinction of relapsed fear does not require the basolateral amygdala.

PubMed

Lingawi, Nura W; Westbrook, R Frederick; Laurent, Vincent

2017-03-01

It is well established that extinguished fears are restored with the passage of time or a change in physical context. These fear restoration phenomena are believed to mimic the conditions under which relapse occurs in patients that have been treated for anxiety disorders by means of cue-exposure therapy. Here, we used a rodent model to extinguish relapsed fear and assess whether this new extinction prevents further relapse. We found that activity in the basolateral amygdala (BLA) is required to initially extinguish conditioned fear, but this activity was not necessary to subsequently extinguish relapsed fear. That is, extinction of spontaneously recovered or renewed fear was spared by BLA inactivation. Yet, this BLA-independent learning of extinction did not protect against further relapse: extinction of relapsed fear conducted without BLA activity was still likely to return after the passage of time or a shift in physical context. These findings have important clinical implications. They indicate that pharmacological agents with anxiolytic properties may disrupt initial cue-exposure therapy but may be useful when therapy is again needed due to relapse. However, they also suggest that these agents will not protect against further relapse, implying the need for developing drugs that target other brain regions involved in fear inhibition. Copyright © 2017 Elsevier Inc. All rights reserved.

Multilayer Microfluidic Devices Created From A Single Photomask

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kelly, Ryan T.; Sheen, Allison M.; Jambovane, Sachin R.

2013-08-28

The time and expense associated with high quality photomask production can discourage the creation of multilayer microfluidic devices, as each layer currently requires a separate photomask. Here we describe an approach in which multilayer microfabricated devices can be created from a single photomask. The separate layers and their corresponding alignment marks are arranged in separate halves of the mask for two layer devices or quadrants for four layer devices. Selective exposure of the photomask features and rotation of the device substrate between exposures result in multiple copies of the devices on each wafer. Subsequent layers are aligned to patterned featuresmore » on the substrate with the same alignment accuracy as when multiple photomasks are used. We demonstrate this approach for fabricating devices employing multilayer soft lithography (MSL) for pneumatic valving. MSL devices containing as many as 5 layers (4 aligned fluidic layers plus a manually aligned control layer) were successfully created using this approach. Device design is also modularized, enabling the presence or absence of features as well as channel heights to be selected independently from one another. The use of a single photomask to create multilayer devices results in a dramatic savings of time and/or money required to advance from device design to completed prototype.« less

Optimization of the fiber laser parameters for local high-temperature impact on metal

NASA Astrophysics Data System (ADS)

Yatsko, Dmitrii S.; Polonik, Marina V.; Dudko, Olga V.

2016-11-01

This paper presents the local laser heating process of surface layer of the metal sample. The aim is to create the molten pool with the required depth by laser thermal treatment. During the heating the metal temperature at any point of the molten zone should not reach the boiling point of the main material. The laser power, exposure time and the spot size of a laser beam are selected as the variable parameters. The mathematical model for heat transfer in a semi-infinite body, applicable to finite slab, is used for preliminary theoretical estimation of acceptable parameters values of the laser thermal treatment. The optimization problem is solved by using an algorithm based on the scanning method of the search space (the zero-order method of conditional optimization). The calculated values of the parameters (the optimal set of "laser radiation power - exposure time - spot radius") are used to conduct a series of natural experiments to obtain a molten pool with the required depth. A two-stage experiment consists of: a local laser treatment of metal plate (steel) and then the examination of the microsection of the laser irradiated region. According to the experimental results, we can judge the adequacy of the ongoing calculations within the selected models.

Adenylyl cylases 1 and 8 mediate select striatal-dependent behaviors and sensitivity to ethanol stimulation in the adolescent period following acute neonatal ethanol exposure.

PubMed

Susick, Laura L; Lowing, Jennifer L; Bosse, Kelly E; Hildebrandt, Clara C; Chrumka, Alexandria C; Conti, Alana C

2014-08-01

Neonatal alcohol exposure in rodents causes dramatic neurodegenerative effects throughout the developing nervous system, particularly in the striatum, acutely after exposure. These acute neurodegenerative effects are augmented in mice lacking adenylyl cyclases 1 and 8 (AC1/8) as neonatal mice with a genetic deletion of both AC isoforms (DKO) have increased vulnerability to ethanol-induced striatal neurotoxicity compared to wild type (WT) controls. While neonatal ethanol exposure is known to negatively impact cognitive behaviors, such as executive functioning and working memory in adolescent and adult animals, the threshold of ethanol exposure required to impinge upon developmental behaviors in mice has not been extensively examined. Therefore, the purpose of this study was to determine the behavioral effects of neonatal ethanol exposure using various striatal-dependent developmental benchmarks and to assess the impact of AC1/8 deletion on this developmental progression. WT and DKO mice were treated with 2.5 g/kg ethanol or saline on postnatal day (P)6 and later subjected to the wire suspension, negative geotaxis, postural reflex, grid hang, tail suspension and accelerating rotarod tests at various time points. At P30, mice were evaluated for their hypnotic responses to 4.0 g/kg ethanol by using the loss of righting reflex assay and ethanol-induced stimulation of locomotor activity after 2.0 g/kg ethanol. Ethanol exposure significantly impaired DKO performance in the negative geotaxis test while genetic deletion of AC1/8 alone increased grid hang time and decreased immobility time in the tail suspension test with a concomitant increase in hindlimb clasping behavior. Locomotor stimulation was significantly increased in animals that received ethanol as neonates, peaking significantly in ethanol-treated DKO mice compared to ethanol-treated WT controls, while sedation duration following high-dose ethanol challenge was unaffected. These data indicate that the maturational parameters examined in the current study may not be sensitive enough to detect effects of a single ethanol exposure during the brain growth spurt period. Genetic deletion of AC1/8 reveals a role for these cylases in attenuating ethanol-induced behavioral effects in the neonatally-exposed adolescent. Published by Elsevier B.V.

Assessment of the potential human health risks from exposure to complex substances in accordance with REACH requirements. "White spirit" as a case study.

PubMed

McKee, Richard H; Tibaldi, Rosalie; Adenuga, Moyinoluwa D; Carrillo, Juan-Carlos; Margary, Alison

2018-02-01

The European chemical control regulation (REACH) requires that data on physical/chemical, toxicological and environmental hazards be compiled. Additionally, REACH requires formal assessments to ensure that substances can be safely used for their intended purposes. For health hazard assessments, reference values (Derived No Effect levels, DNELs) are calculated from toxicology data and compared to estimated exposure levels. If the ratio of the predicted exposure level to the DNEL, i.e. the Risk Characterization Ratio (RCR), is less than 1, the risk is considered controlled; otherwise, additional Risk Management Measures (RMM) must be applied. These requirements pose particular challenges for complex substances. Herein, "white spirit", a complex hydrocarbon solvent, is used as an example to illustrate how these procedures were applied. Hydrocarbon solvents were divided into categories of similar substances. Representative substances were identified for DNEL determinations. Adjustment factors were applied to the no effect levels to calculate the DNELs. Exposure assessments utilized a standardized set of generic exposure scenarios (GES) which incorporated exposure predictions for solvent handling activities. Computer-based tools were developed to automate RCR calculations and identify appropriate RMMs, allowing consistent communications to users via safety data sheets. Copyright © 2017 ExxonMobil Biomedical Sciences Inc. Published by Elsevier Inc. All rights reserved.

Sampling strategies for estimating acute and chronic exposures of pesticides in streams

USGS Publications Warehouse

Crawford, Charles G.

2004-01-01

The Food Quality Protection Act of 1996 requires that human exposure to pesticides through drinking water be considered when establishing pesticide tolerances in food. Several systematic and seasonally weighted systematic sampling strategies for estimating pesticide concentrations in surface water were evaluated through Monte Carlo simulation, using intensive datasets from four sites in northwestern Ohio. The number of samples for the strategies ranged from 4 to 120 per year. Sampling strategies with a minimal sampling frequency outside the growing season can be used for estimating time weighted mean and percentile concentrations of pesticides with little loss of accuracy and precision, compared to strategies with the same sampling frequency year round. Less frequent sampling strategies can be used at large sites. A sampling frequency of 10 times monthly during the pesticide runoff period at a 90 km 2 basin and four times monthly at a 16,400 km2 basin provided estimates of the time weighted mean, 90th, 95th, and 99th percentile concentrations that fell within 50 percent of the true value virtually all of the time. By taking into account basin size and the periodic nature of pesticide runoff, costs of obtaining estimates of time weighted mean and percentile pesticide concentrations can be minimized.

Experience of plastic surgery registrars in a European Working Time Directive compliant rota.

PubMed

de Blacam, Catherine; Tierney, Sean; Shelley, Odhran

2017-08-01

Surgical training requires exposure to clinical decision-making and operative experience in a supervised environment. It is recognised that learning ability is compromised when fatigued. The European Working Time Directive requires a decrease in working hours, but compliance reduces trainees' clinical exposure, which has profound implications for plastic surgery training. The aim of this study was to evaluate plastic surgery registrars' experience of an EWTD-compliant rota, and to examine its impact on patient care, education, and logbook activity. An electronic survey was distributed to plastic surgery registrars in a university teaching hospital. Registrars were asked to rate 31 items on a five-point Likert scale, including statements on patient care, clinical and operative duties, training, and quality-of-life. Interquartile deviations explored consensus among responses. Operative caseload was objectively evaluated using eLogbook data to compare activity at equal time points before and after implementation of the EWTD rota. Highest levels of consensus among respondents were found in positive statements addressing alertness and preparation for theatre, as well as time to read and study for exams. Registrars agreed that EWTD compliance improved their quality-of-life. However, it was felt that continuity of patient care was compromised by work hours restriction. Registrars were concerned about their operative experience. eLogbook data confirmed a fall-off in mean caseload of 31.8% compared to activity prior to EWTD rota implementation. While EWTD compliant rotas promote trainee quality-of-life and satisfaction with training, attention needs to be paid to optimising operative opportunities.

In utero bisphenol A exposure disrupts germ cell nest breakdown and reduces fertility with age in the mouse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Wei, E-mail: weiwang2@illinois.edu; Hafner, Katlyn S., E-mail: katlynhafner@gmail.com; Flaws, Jodi A., E-mail: jflaws@illinois.edu

Bisphenol A (BPA) is a known reproductive toxicant in rodents. However, the effects of in utero BPA exposure on early ovarian development and the consequences of such exposure on female reproduction in later reproductive life are unclear. Thus, we determined the effects of in utero BPA exposure during a critical developmental window on germ cell nest breakdown, a process required for establishment of the finite primordial follicle pool, and on female reproduction. Pregnant FVB mice (F0) were orally dosed daily with tocopherol-striped corn oil (vehicle), diethylstilbestrol (DES; 0.05 μg/kg, positive control), or BPA (0.5, 20, and 50 μg/kg) from gestationalmore » day 11 until birth. Ovarian morphology and gene expression profiles then were examined in F1 female offspring on postnatal day (PND) 4 and estrous cyclicity was examined daily after weaning for 30 days. F1 females were also subjected to breeding studies with untreated males at three to nine months. The results indicate that BPA inhibits germ cell nest breakdown via altering expression of selected apoptotic factors. BPA also significantly advances the age of first estrus, shortens the time that the females remain in estrus, and increases the time that the females remain in metestrus and diestrus compared to controls. Further, F1 females exposed to low doses of BPA exhibit various fertility problems and have a significantly higher percentage of dead pups compared to controls. These results indicate that in utero exposure to low doses of BPA during a critical ovarian developmental window interferes with early ovarian development and reduces fertility with age. - Highlights: • In utero BPA exposure inhibits germ cell nest breakdown in female mouse offspring. • In utero BPA exposure alters expression of apoptosis regulators in the ovaries of mouse offspring. • In utero BPA exposure advances first estrus age and alters cyclicity in mouse offspring. • In utero BPA exposure causes various fertility problems in female mouse offspring.« less