Confluence or independence of microwave plasma bullets in atmospheric argon plasma jet plumes

NASA Astrophysics Data System (ADS)

Li, Ping; Chen, Zhaoquan; Mu, Haibao; Xu, Guimin; Yao, Congwei; Sun, Anbang; Zhou, Yuming; Zhang, Guanjun

2018-03-01

Plasma bullet is the formation and propagation of a guided ionization wave (streamer), normally generated in atmospheric pressure plasma jet (APPJ). In most cases, only an ionization front produces in a dielectric tube. The present study shows that two or three ionization fronts can be generated in a single quartz tube by using a microwave coaxial resonator. The argon APPJ plumes with a maximum length of 170 mm can be driven by continuous microwaves or microwave pulses. When the input power is higher than 90 W, two or three ionization fronts propagate independently at first; thereafter, they confluence to form a central plasma jet plume. On the other hand, the plasma bullets move independently as the lower input power is applied. For pulsed microwave discharges, the discharge images captured by a fast camera show the ionization process in detail. Another interesting finding is that the strongest lightening plasma jet plumes always appear at the shrinking phase. Both the discharge images and electromagnetic simulations suggest that the confluence or independent propagation of plasma bullets is resonantly excited by the local enhanced electric fields, in terms of wave modes of traveling surface plasmon polaritons.

A Molecular-line Study of the Interstellar Bullet Engine IRAS05506+2414

NASA Astrophysics Data System (ADS)

Sahai, Raghvendra; Lee, Chin-Fei; Sánchez Contreras, Carmen; Patel, Nimesh; Morris, Mark R.; Claussen, Mark

2017-12-01

We present interferometric and single-dish molecular line observations of the interstellar bullet-outflow source IRAS 05506+2414, whose wide-angle bullet spray is similar to the Orion BN/KL explosive outflow and likely arises from an entirely different mechanism than the classical accretion-disk-driven bipolar flows in young stellar objects. The bullet-outflow source is associated with a large pseudo-disk and three molecular outflows—a high-velocity outflow (HVO), a medium-velocity outflow (MVO), and a slow, extended outflow (SEO). The size (mass) of the pseudo-disk is 10,350 au × 6400 au (0.64-0.17 M ⊙) from a model-fit assuming infall and rotation, we derive a central stellar mass of 8-19 M ⊙. The HVO (MVO) has an angular size ˜5180 (˜3330) au and a projected outflow velocity of ˜140 km s-1 (˜30 km s-1). The SEO size (outflow speed) is ˜0.9 pc (˜6 km s-1). The HVO’s axis is aligned with (orthogonal to) that of the SEO (pseudo-disk). The velocity structure of the MVO is unresolved. The scalar momenta in the HVO and SEO are very similar, suggesting that the SEO has resulted from the HVO interacting with ambient-cloud material. The bullet spray shares a common axis with the pseudo-disk and has an age comparable to that of MVO (few hundred years), suggesting that these three structures are intimately linked. We discuss several models for the outflows in IRAS 05506+2414 (including dynamical decay of a stellar cluster, chance encounter of a runaway star with a dense cloud, and close passage of two protostars), and conclude that second-epoch imaging to derive proper motions of the bullets and nearby stars can help to discriminate between them.

Defense Travel Management Office (DTMO)

Science.gov Websites

) Bullet Allowance Tables Bullet Allowance Calculators Bullet Restricted Fares Training Resources Training Resources Bullet Training Resource Lookup Bullet Listing of Available Training Resources Bullet New and Updated Training Resources Bullet Instructions for Accessing Training in Travel Explorer Bullet Enterprise

A Comparison of Simplified-Visually Rich and Traditional Presentation Styles

ERIC Educational Resources Information Center

Johnson, Douglas A.; Christensen, Jack

2011-01-01

Microsoft PowerPoint and similar presentation tools have become commonplace in higher education, yet there is very little research on the effectiveness of different PowerPoint formats for implementing this software. This study compared two PowerPoint presentation techniques: a more traditional format employing heavy use of bullet points with text…

Path length and spectrum of single-cycle mid-IR light bullets in transparent dielectrics

NASA Astrophysics Data System (ADS)

Chekalin, S. V.; Kompanets, V. O.; Dormidonov, A. E.; Kandidov, V. P.

2018-04-01

Filamentation of femtosecond laser radiation with a wavelength of 800 – 3900 nm and a power slightly exceeding the critical self-focusing power is studied using the spectral method and the method of laser coloration in LiF crystal. It is found that the length of a filament formed in the single-pulse regime increases with increasing excitation wavelength from a few tens of micrometres at 80 nm to hundreds of micrometres at 3900 nm. In the spectral region of anomalous group velocity dispersion, starting from 2600 nm, the initially smooth luminescence profile of the long-lived induced colour centres acquires a periodic structure, demonstrating the formation of a light bullet with a duration of about one cycle of the light field oscillation and a diameter smaller than 10 μm. The path length of such bullets does not exceed 0.5 mm in the single-pulse regime and 2.7 mm in the waveguide regime. A consequence of periodic modulation of the bullet light field in the process of propagation, observed experimentally and confirmed by calculations, is the appearance of sidebands near the excitation wavelength, as well as the appearance of visible spectral components in the supercontinuum radiation, whose angular divergence increases with increasing wavelength.

A Death Involving a Fired and Deflected Bullet: A Case Report from Lyon University Institute of Forensic Science, France.

PubMed

Maujean, Géraldine; Guinet, Tiphaine; Malicier, Daniel

2016-01-01

In case of gunshot deaths, atypical wounds can make the distinction between entrance and exit wounds harder. They may be due either to anatomical reasons or to diverse cogent ballistic arguments. The reported case pertains to a fatal hunting accident involving an expanded conical point bullet against the neck with both atypical entrance and exit wounds. Ballistic analyses including test firings allowed a better understanding of the external and internal findings. Upon premature impact with an intermediary target, the bullet experienced expansion in the formation of sharp brass petals responsible for a star-shaped entry wound. The trajectory of the deformed high energy projectile through the victim's body was then deviated by the cervical column, causing it to be tangential to the skin when exiting the body. The description of such atypical cases may benefit other experts and may assist in their investigation into similar cases. © 2015 American Academy of Forensic Sciences.

Kinematics of Ultra-high-velocity Gas in the Expanding Molecular Shell Adjacent to the W44 Supernova Remnant

NASA Astrophysics Data System (ADS)

Yamada, Masaya; Oka, Tomoharu; Takekawa, Shunya; Iwata, Yuhei; Tsujimoto, Shiho; Tokuyama, Sekito; Furusawa, Maiko; Tanabe, Keisuke; Nomura, Mariko

2017-01-01

We mapped the ultra-high-velocity feature (the “Bullet”) detected in the expanding molecular shell associated with the W44 supernova remnant using the Nobeyama Radio Observatory 45 m telescope and the Atacama Submillimeter Telescope Experiment 10 m telescope. The Bullet clearly appears in the CO J = 1-0, CO J = 3-2, CO J = 4-3, and HCO+ J = 1-0 maps with a compact appearance (0.5 × 0.8 pc2) and an extremely broad-velocity width (ΔV ≃ 100 km s-1). The line intensities indicate that the Bullet has a higher density and temperature than those in the expanding molecular shell. The kinetic energy of the Bullet amounts to 1048.0 erg, which is approximately 1.5 orders of magnitude greater than the kinetic energy shared to the small solid angle of it. Two possible formation scenarios with an inactive isolated black hole are presented.

Planar light bullets under conditions of second-harmonic generation.

PubMed

Sazonov, Sergey V; Mamaikin, Mikhail S; Komissarova, Maria V; Zakharova, Irina G

2017-08-01

We study solutions to second-harmonic-generation equations in two-dimensional media with anomalous dispersion. The analytical solution is obtained in an approximate form of the planar spatiotemporal two-component soliton by means of the averaged Lagrangian method. It is shown that a decrease in the amplitudes of both soliton components and an increase in the value of the transverse coordinate are accompanied by an increase in their temporal duration. Within this variational approach, we have managed to find a stability criterion for the light bullet and a period of oscillations of soliton parameters. Then, we use the obtained form as an initial configuration to carry out the direct numerical simulation of soliton dynamics. We demonstrate stable propagation of spatiotemporal solitons undergoing small oscillations predicted analytically for a long distance. The formation of a two-component light bullet is shown when we launch a pulse only at the fundamental frequency. In addition, we investigate the phase and group-velocity mismatch effects on the propagation of pulses.

Application of a XMM-Newton EPIC Monte Carlo to Analysis And Interpretation of Data for Abell 1689, RXJ0658-55 And the Centaurus Clusters of Galaxies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andersson, Karl E.; /Stockholm U. /SLAC; Peterson, J.R.

2007-04-17

We propose a new Monte Carlo method to study extended X-ray sources with the European Photon Imaging Camera (EPIC) aboard XMM Newton. The Smoothed Particle Inference (SPI) technique, described in a companion paper, is applied here to the EPIC data for the clusters of galaxies Abell 1689, Centaurus and RXJ 0658-55 (the ''bullet cluster''). We aim to show the advantages of this method of simultaneous spectral-spatial modeling over traditional X-ray spectral analysis. In Abell 1689 we confirm our earlier findings about structure in temperature distribution and produce a high resolution temperature map. We also confirm our findings about velocity structuremore » within the gas. In the bullet cluster, RXJ 0658-55, we produce the highest resolution temperature map ever to be published of this cluster allowing us to trace what looks like the motion of the bullet in the cluster. We even detect a south to north temperature gradient within the bullet itself. In the Centaurus cluster we detect, by dividing up the luminosity of the cluster in bands of gas temperatures, a striking feature to the north-east of the cluster core. We hypothesize that this feature is caused by a subcluster left over from a substantial merger that slightly displaced the core. We conclude that our method is very powerful in determining the spatial distributions of plasma temperatures and very useful for systematic studies in cluster structure.« less

Hydrodynamics of back spatter by blunt bullet gunshot with a link to bloodstain pattern analysis

NASA Astrophysics Data System (ADS)

Comiskey, P. M.; Yarin, A. L.; Attinger, D.

2017-07-01

A theoretical model describing the blood spatter pattern resulting from a blunt bullet gunshot is proposed. The predictions are compared to experimental data acquired in the present work. This hydrodynamic problem belongs to the class of the impact hydrodynamics with the pressure impulse generating the blood flow. At the free surface, the latter is directed outwards and accelerated toward the surrounding air. As a result, the Rayleigh-Taylor instability of the flow of blood occurs, which is responsible for the formation of blood drops of different sizes and initial velocities. Thus, the initial diameter, velocity, and acceleration of the atomized blood drops can be determined. Then, the equations of motion are solved, describing drop trajectories in air accounting for gravity, and air drag. Also considered are the drop-drop interactions through air, which diminish air drag on the subsequent drops. Accordingly, deposition of two-phase (blood-drop and air) jets on a vertical cardstock sheet located between the shooter and the target (and perforated by the bullet) is predicted and compared with experimental data. The experimental data were acquired with a porous polyurethane foam sheet target impregnated with swine blood, and the blood drops were collected on a vertical cardstock sheet which was perforated by the blunt bullet. The highly porous target possesses a low hydraulic resistance and therefore resembles a pool of blood shot by a blunt bullet normally to its free surface. The back spatter pattern was predicted numerically and compared to the experimental data for the number of drops, their area, the total stain area, and the final impact angle as functions of radial location from the bullet hole in the cardstock sheet (the collection screen). Comparisons of the predicted results with the experimental data revealed satisfactory agreement. The predictions also allow one to find the impact Weber number on the collection screen, which is necessary to predict stain shapes and sizes.

21 CFR 358.650 - Labeling of pediculicide drug products.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) of this chapter. (2) “Do not use [bullet] 1 near eyes [bullet] inside nose, mouth, or vagina [bullet... [bullet] keep eyes tightly closed and protect eyes with a washcloth or towel [bullet] if product gets in eyes, flush with water right away [bullet] scalp itching or redness may occur”. (5) “Stop use and ask a...

Diagnostics of an AC driven atmospheric pressure non-thermal plasma jet and its use for radially directed jet array

NASA Astrophysics Data System (ADS)

Zhu, W.; Wang, R.

2017-08-01

An alternating current atmospheric pressure plasma jet is generated with noble gas or noble gas/oxygen admixture as working gas. A "core plasma filament" is observed at the center of the dielectric tube and extends to the plasma jet at higher peak-to-peak voltages. This type of plasma jet is believed to be of the same nature with the reported plasma bullet driven by pulsed DC power sources. Double current probes are used to assess the speed of the plasma bullet and show that the speed is around 104-105 m/s. The time dependence of the downstream bullet speed is attributed to the gas heating and in turn the increase of the reduced electric field E/N. Optical emission spectra show the dependence of helium and oxygen emission intensities on the concentration of oxygen additive in the carrier gas, with peak values found at 0.5% O2. Multiple radial jets are realized on dielectric tubes of different sizes. As a case study, one of these multi-jet devices is used to treat B. aureus on the inner surface of a plastic beaker and is shown to be more effective than a single jet.

Discrimination of bullet types using analysis of lead isotopes deposited in gunshot entry wounds.

PubMed

Wunnapuk, Klintean; Minami, Takeshi; Durongkadech, Piya; Tohno, Setsuko; Ruangyuttikarn, Werawan; Moriwake, Yumi; Vichairat, Karnda; Sribanditmongkol, Pongruk; Tohno, Yoshiyuki

2009-01-01

In order to discriminate bullet types used in firearms, of which the victims died, the authors investigated lead isotope ratios in gunshot entry wounds from nine lead (unjacketed) bullets, 15 semi-jacketed bullets, and 14 full-jacketed bullets by inductively coupled plasma-mass spectrometry. It was found that the lead isotope ratio of 207/206 in gunshot entry wounds was the highest with lead bullets, and it decreased in order from full-jacketed to semi-jacketed bullets. Lead isotope ratios of 208/206 or 208/207 to 207/206 at the gunshot entry wound were able to discriminate semi-jacketed bullets from lead and full-jacketed ones, but it was difficult to discriminate between lead and full-jacketed bullets. However, a combination of element and lead isotope ratio analyses in gunshot entry wounds enabled discrimination between lead, semi-jacketed, and full-jacketed bullets.

21 CFR 347.50 - Labeling of skin protectant drug products.

Code of Federal Regulations, 2010 CFR

2010-04-01

... states “dries the oozing and weeping of poison: [bullet] ivy [bullet] oak [bullet] sumac”. (4) For...) “When using this product [bullet] do not get into eyes”. (3) “Stop use and ask a doctor if [bullet... doctor [bullet] pat dry (do not rub) to keep a thin layer on the skin”. (B) For products used as a...

Body models in forensic ballistics: reconstruction of a gunshot injury to the chest by bullet fragmentation after shooting through a finger.

PubMed

Thali, M J; Kneubuehl, B P; Dirnhofer, R; Zollinger, U

2001-11-15

Forensic science uses substitutes to reconstruct injury patterns in order to answer questions regarding the dynamic formation of unusual injuries. Using a case study, an experimental simulation of a finger was designed, for the first time with a combination of hard wood and glycerin soap. With this model as an intermediate target simulation, it was possible not only to demonstrate the "bullet-body (finger) interaction", but also to recreate the wound pattern found in the victim. This case demonstrates that by using ballistic models and body-part substitutes, gunshot cases can be reproduced simply and economically, without coming into conflict with ethical guidelines.

Clothing increases the risk of indirect ballistic fractures

PubMed Central

2013-01-01

Background Current literature has shown the mechanism of how indirect fractures occur but has not determined what factors increase the risks of such fractures. The objective of this study is thus to determine the effect of clothing and soft tissue thickness on the risk of indirect fracture formation. Methods Twenty-five fresh red deer femora embedded in ballistic gelatine were shot with varying distances off their medial cortex with a 5.56 × 45 mm North Atlantic Treaty Organization (NATO) bullet while being filmed with a slow-motion video. We compared the effect of two different gelatine depths and the effect of denim cloth laid onto the impact surface of the moulds. Results Bullet passage in thinner moulds failed to cause fracture because the bullet exited the mould before a large expanding temporary cavity was produced. Clothing dramatically altered the size and depth of the expanding cavity, as well as increased lateral pressures, resulting in more severe fractures with greater bullet distances from the bone that can cause fracture. Conclusions Clothing increases the risk of indirect fracture and results in larger, more superficial temporary cavities, with greater lateral pressures than are seen in unclothed specimens, resulting in more comminuted fractures. Greater tissue depth affords the 5.56 × 45 mm NATO a chance to yaw and thus develop an enlarging temporary cavity that is sufficient to cause fracture. PMID:24267379

[A change in the direction of the wound channel in the case of the combined injury inflicted by a shot from the 9.0 mm Makarov pistol].

PubMed

Gusarov, A A; Makarov, I Yu; Fetisov, V A

2018-01-01

The authors present an example from the expert practice demonstrating the influence of such factors as the properties of the ammunition fired from a weapon (including its weight, size, shape, and speed) as well as the anatomical features of the body tissues being affected on the mechanism of formation of a gunshot wound in the human body. The investigation of the suicide of subject P. has demonstrated the penetrating bullet wound of the neck and the head. The entrance wound was located at the anterior neck surface and the exit one in the left half of the occipital region. The examination of the cranial bones revealed perforating fractures of the cribriform and occipital bones. A specific feature of the case under consideration was a change in the bullet direction during its passage through the cribriform bone that made up the internal osseous barrier. A result the initially vertical wound canal turned into the horizontal one within the cerebral cranium and looked on the whole like a zigzag line. The present observation confirms the possibility of a marked change in the direction of the bullet's trajectory in the cranial cavity even when a 9.0 mm bullet fired from the Makarov pistol hits a relatively soft internal bone structure.

A shot through the window.

PubMed

Burnett, B R

2001-03-01

At issue in this case was whether an unusual window defect seen in two of the crime scene photographs was due to a bullet and if so, if that same bullet fatally wounded the victim. The window appeared to have been cracked prior to the apparent shot through it. A .22 bullet recovered from autopsy, when examined only by light microscopy, failed to show associated glass fragments. A previously cracked test window was shot a number of times with .22 caliber bullets near the cracks in an effort to simulate the window defect seen in the crime scene photographs. Several of the defects produced by the test window shots appeared similar to the crime scene window defect. The .22 bullet taken from the victim and several of the test bullets (collected by a cotton box) were examined by scanning electron microscopy/energy dispersive X-ray spectroscopy. The test bullets showed glass particles on and embedded in their surfaces. Particles of similar size and composition were found embedded in the surface of the bullet from the victim. The bullet likely struck the window prior to hitting the victim. It was apparent by the morphology of some of the mushroomed test .22 bullets that they hit the window crack. These bullets showed that the glass on one side of a crack often fails before the other side during the strike. Aggregations of powdered glass on many of the mushroomed surfaces of the .22 bullets suggest that as the bullet mushrooms during impact on the window surface, the glass in contact with the bullet powderizes and coats the mushroomed surface of the bullet with a layer of fine glass particles.

Simulation of impact ballistic of Cu-10wt%Sn frangible bullet using smoothed particle hydrodynamics

NASA Astrophysics Data System (ADS)

Hidayat, Mas Irfan P.; Widyastuti, Simaremare, Peniel

2018-04-01

Frangible bullet is designed to disintegrate upon impact against a hard target. Understanding the impact response and performance of frangible bullet is therefore of highly interest. In this paper, simulation of impact ballistic of Cu-IOwt%Sn frangible bullet using smoothed particle hydrodynamics (SPH) method is presented. The frangible bullet is impacted against a hard, cylindrical stainless steel target. Effect of variability of the frangible bullet material properties due to the variation of sintering temperature in its manufacturing process to the bullet frangibility factor (FF) is investigated numerically. In addition, the bullet kinetic energy during impact as well as its ricochet and fragmentation are also examined and simulated. Failure criterion based upon maximum strain is employed in the simulation. It is shown that the SPH simulation can produce good estimation for kinetic energy of bullet after impact, thus giving the FF prediction with respect to the variation of frangible bullet material properties. In comparison to explicit finite element (FE) simulation, in which only material/element deletion is shown, convenience in showing frangible bullet fragmentation is shown using the SPH simulation. As a result, the effect of sintering temperature to the way of the frangible bullet fragmented can be also observed clearly.

Performance of lead-free versus lead-based hunting ammunition in ballistic soap.

PubMed

Gremse, Felix; Krone, Oliver; Thamm, Mirko; Kiessling, Fabian; Tolba, René Hany; Rieger, Siegfried; Gremse, Carl

2014-01-01

Lead-free hunting bullets are an alternative to lead-containing bullets which cause health risks for humans and endangered scavenging raptors through lead ingestion. However, doubts concerning the effectiveness of lead-free hunting bullets hinder the wide-spread acceptance in the hunting and wildlife management community. We performed terminal ballistic experiments under standardized conditions with ballistic soap as surrogate for game animal tissue to characterize dimensionally stable, partially fragmenting, and deforming lead-free bullets and one commonly used lead-containing bullet. The permanent cavities created in soap blocks are used as a measure for the potential wound damage. The soap blocks were imaged using computed tomography to assess the volume and shape of the cavity and the number of fragments. Shots were performed at different impact speeds, covering a realistic shooting range. Using 3D image segmentation, cavity volume, metal fragment count, deflection angle, and depth of maximum damage were determined. Shots were repeated to investigate the reproducibility of ballistic soap experiments. All bullets showed an increasing cavity volume with increasing deposited energy. The dimensionally stable and fragmenting lead-free bullets achieved a constant conversion ratio while the deforming copper and lead-containing bullets showed a ratio, which increases linearly with the total deposited energy. The lead-containing bullet created hundreds of fragments and significantly more fragments than the lead-free bullets. The deflection angle was significantly higher for the dimensionally stable bullet due to its tumbling behavior and was similarly low for the other bullets. The deforming bullets achieved higher reproducibility than the fragmenting and dimensionally stable bullets. The deforming lead-free bullet closely resembled the deforming lead-containing bullet in terms of energy conversion, deflection angle, cavity shape, and reproducibility, showing that similar terminal ballistic behavior can be achieved. Furthermore, the volumetric image processing allowed superior analysis compared to methods that involve cutting of the soap blocks.

Performance of Lead-Free versus Lead-Based Hunting Ammunition in Ballistic Soap

PubMed Central

Gremse, Felix; Krone, Oliver; Thamm, Mirko; Kiessling, Fabian; Tolba, René Hany; Rieger, Siegfried; Gremse, Carl

2014-01-01

Background Lead-free hunting bullets are an alternative to lead-containing bullets which cause health risks for humans and endangered scavenging raptors through lead ingestion. However, doubts concerning the effectiveness of lead-free hunting bullets hinder the wide-spread acceptance in the hunting and wildlife management community. Methods We performed terminal ballistic experiments under standardized conditions with ballistic soap as surrogate for game animal tissue to characterize dimensionally stable, partially fragmenting, and deforming lead-free bullets and one commonly used lead-containing bullet. The permanent cavities created in soap blocks are used as a measure for the potential wound damage. The soap blocks were imaged using computed tomography to assess the volume and shape of the cavity and the number of fragments. Shots were performed at different impact speeds, covering a realistic shooting range. Using 3D image segmentation, cavity volume, metal fragment count, deflection angle, and depth of maximum damage were determined. Shots were repeated to investigate the reproducibility of ballistic soap experiments. Results All bullets showed an increasing cavity volume with increasing deposited energy. The dimensionally stable and fragmenting lead-free bullets achieved a constant conversion ratio while the deforming copper and lead-containing bullets showed a ratio, which increases linearly with the total deposited energy. The lead-containing bullet created hundreds of fragments and significantly more fragments than the lead-free bullets. The deflection angle was significantly higher for the dimensionally stable bullet due to its tumbling behavior and was similarly low for the other bullets. The deforming bullets achieved higher reproducibility than the fragmenting and dimensionally stable bullets. Conclusion The deforming lead-free bullet closely resembled the deforming lead-containing bullet in terms of energy conversion, deflection angle, cavity shape, and reproducibility, showing that similar terminal ballistic behavior can be achieved. Furthermore, the volumetric image processing allowed superior analysis compared to methods that involve cutting of the soap blocks. PMID:25029572

Thermodynamic modeling of solid solutions between monosulfate and monochromate 3CaO Bullet Al{sub 2}O{sub 3} Bullet Ca[(CrO{sub 4}){sub x}(SO{sub 4}){sub 1-x}] Bullet nH{sub 2}O

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leisinger, Sabine M., E-mail: sabine.leisinger@eawag.ch; Institute of Biogeochemistry and Pollutant Dynamics, ETH, CH-8092 Zurich; Lothenbach, Barbara

2012-01-15

In hydrated cement paste AFm-phases are regarded to play an important role in the binding of the toxic contaminant chromate through isomorphic substitution with sulfate. Solid solutions formation can lower the solubility of the solids, thus reducing chromate leaching concentrations. Solid solutions between monosulfate and monochromate were synthesized and characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX) and inductive coupled plasma optical emission spectroscopy (ICP-OES). Based on the measured ion concentrations in solution total solubility products of the solid solution series were determined. For pure monochromate a logK = - 28.4more » {+-} 0.7 was determined. Results from solid and solution analysis showed that limited solid solutions exist. Based on XRD diffractograms a solid solution with a miscibility gap 0.15 < Crx < 0.85 with a dimensionless Guggenheim parameter of 2.43 was proposed.« less

KINEMATICS OF ULTRA-HIGH-VELOCITY GAS IN THE EXPANDING MOLECULAR SHELL ADJACENT TO THE W44 SUPERNOVA REMNANT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamada, Masaya; Oka, Tomoharu; Takekawa, Shunya

We mapped the ultra-high-velocity feature (the “Bullet”) detected in the expanding molecular shell associated with the W44 supernova remnant using the Nobeyama Radio Observatory 45 m telescope and the Atacama Submillimeter Telescope Experiment 10 m telescope. The Bullet clearly appears in the CO J = 1–0, CO J = 3–2, CO J = 4–3, and HCO{sup +} J = 1–0 maps with a compact appearance (0.5 × 0.8 pc{sup 2}) and an extremely broad-velocity width (Δ V ≃ 100 km s{sup −1}). The line intensities indicate that the Bullet has a higher density and temperature than those in the expandingmore » molecular shell. The kinetic energy of the Bullet amounts to 10{sup 48.0} erg, which is approximately 1.5 orders of magnitude greater than the kinetic energy shared to the small solid angle of it. Two possible formation scenarios with an inactive isolated black hole are presented.« less

SRM 2460/2461 Standard Bullets and Casings Project

PubMed Central

Song, J.; Whitenton, E.; Kelley, D.; Clary, R.; Ma, L.; Ballou, S.; Ols, M.

2004-01-01

The National Institute of Standards and Technology Standard Reference Material (SRM) 2460/2461 standard bullets and casings project will provide support to firearms examiners and to the National Integrated Ballistics Information Network (NIBIN) in the United States. The SRM bullet is designed as both a virtual and a physical bullet profile signature standard. The virtual standard is a set of six digitized bullet profile signatures originally traced from six master bullets fired at the Bureau of Alcohol, Tobacco and Firearms (ATF) and the Federal Bureau of Investigation (FBI). By using the virtual signature standard to control the tool path on a numerically controlled diamond turning machine, 40 SRM bullets were produced. A profile signature measurement system was established for the SRM bullets. The profile signature differences are quantified by the maximum of the cross correlation function and by the signature difference between pairs of compared profile signatures measured on different SRM bullets. Initial measurement results showed high reproducibility for both the measurement system and production process of the SRM bullets. A traceability scheme has been proposed to establish the measurement traceability for nationwide bullet signature measurements to NIST, ATF and FBI. Prototype SRM casings have also been developed. PMID:27366632

Fiber fuse behavior in kW-level continuous-wave double-clad field laser

NASA Astrophysics Data System (ADS)

Jun-Yi, Sun; Qi-Rong, Xiao; Dan, Li; Xue-Jiao, Wang; Hai-Tao, Zhang; Ma-Li, Gong; Ping, Yan

2016-01-01

In this study, original experimental data for fiber fuse in kW-level continuous-wave (CW) high power double-clad fiber (DCF) laser are reported. The propagating velocity of the fuse is 9.68 m/s in a 3.1-kW Yb-doped DCF laser. Three other cases in Yb-doped DCF are also observed. We think that the ignition of fiber fuse is caused by thermal mechanism, and the formation of bullet-shaped tracks is attributed to the optical discharge and temperature gradient. The inducements of initial fuse and formation of bullet-shaped voids are analyzed. This investigation of fiber fuse helps better understand the fiber fuse behavior, in order to avoid the catastrophic destruction caused by fiber fuse in high power fiber laser. Project supported by the Key Laboratory of Science and Technology on High Energy Laser and China Academy of Engineering Physics (Grant No. 2014HEL02) and the National Natural Science Foundation of China (Grant No. 61307057).

Optical bullets and "rockets" in nonlinear dissipative systems and their transformations and interactions.

PubMed

Soto-Crespo, J M; Grelu, Philippe; Akhmediev, Nail

2006-05-01

We demonstrate the existence of stable optical light bullets in nonlinear dissipative media for both cases of normal and anomalous chromatic dispersion. The prediction is based on direct numerical simulations of the (3+1)-dimensional complex cubic-quintic Ginzburg-Landau equation. We do not impose conditions of spherical or cylindrical symmetry. Regions of existence of stable bullets are determined in the parameter space. Beyond the domain of parameters where stable bullets are found, unstable bullets can be transformed into "rockets" i.e. bullets elongated in the temporal domain. A few examples of the interaction between two optical bullets are considered using spatial and temporal interaction planes.

Plasma bullet current measurements in a free-stream helium capillary jet

NASA Astrophysics Data System (ADS)

Oh, Jun-Seok; Walsh, James L.; Bradley, James W.

2012-06-01

A commercial current monitor has been used to measure the current associated with plasma bullets created in both the positive and negative half cycles of the sinusoidal driving voltage sustaining a plasma jet. The maximum values of the positive bullet current are typically ˜750 µA and persist for 10 µs, while the peaks in the negative current of several hundred μA are broad, persisting for about 40 µs. From the time delay of the current peaks with increasing distance from the jet nozzle, an average bullet propagation speed has been measured; the positive and negative bullets travel at 17.5 km s-1 and 3.9 km s-1 respectively. The net space charge associated with the bullet(s) has also been calculated; the positive and negative bullets contain a similar net charge of the order of 10-9 C measured at all monitor positions, with estimated charged particle densities nb of ˜1010-1011 cm-3 in the bullet.

21 CFR 358.350 - Labeling of ingrown toenail relief drug products.

Code of Federal Regulations, 2011 CFR

2011-04-01

... product [bullet] use with a retainer ring”. (5) “Stop use and ask a doctor if [bullet] redness or swelling... years and over:” (i) “[Bullet] wash the affected area and dry thoroughly [bullet] place retainer ring on toe with slot over the area where the ingrown nail and the skin meet. Smooth ring down firmly. [bullet...

Differences in the element contents between gunshot entry wounds with full-jacketed bullet and lead bullet.

PubMed

Wunnapuk, Klintean; Durongkadech, Piya; Minami, Takeshi; Ruangyuttikarn, Werawan; Tohno, Setsuko; Vichairat, Karnda; Azuma, Cho; Sribanditmongkol, Pongruk; Tohno, Yoshiyuki

2007-01-01

To elucidate characteristics of gunshot residues in gunshot entry wounds with full-jacketed and lead bullets, element contents in entry gunshot wounds and control skins were analyzed by inductively coupled plasma-atomic emission spectrometry (ICP-AES). It was found that a high content of Fe and Zn was deposited in the gunshot entry wounds with full-jacketed bullet, whereas a high content of Pb was deposited in the gunshot entry wounds with lead (unjacked) bullet. It should be noted that the content of Pb was significantly higher in the gunshot entry wounds with lead bullet than in those with full-jacketed bullet. Regarding the relationships among elements, it was found that there were significant direct correlations between Pb and either Sb or Ba contents in both gunshot entry wounds with full-jacketed and lead bullets. As Pb increased in both gunshot entry wounds, Sb and Ba also increased in the wounds.

An Elusive Bullet in the Gastrointestinal Tract: A Rare Case of Bullet Embolism in the Gastrointestinal Tract and a Review of Relevant Literature

PubMed Central

Biswas, Saptarshi

2014-01-01

Bullet embolism within the gastrointestinal system is extremely rare. Such bullet injuries are infrequently covered in the general literature, but the surgeon should be aware of the phenomenon. Smaller caliber bullets are more common in civilian gunshot wound (GSW) events. These bullets are able to tumble through the gastrointestinal tract and cause perforation of the intestinal lumen which is small enough to be easily missed. Bullets retained in the abdominal cavity should not be dismissed as fixed and should be carefully monitored to ensure that they do not embolize within the bowel and cause occult lesions during their migration. We present a unique case wherein a bullet caused a minute perforation in the small bowel, before migrating to the distal colon, which resulted in late presentation of sepsis secondary to peritonitis. PMID:24829839

The origin of the fan of "bullets" in OMC-1

NASA Astrophysics Data System (ADS)

Gvaramadze, Vasilii

A possible mechanism for the formation of linear features radially diverging from the common origin in the Orion molecular cloud OMC-1 is considered. It is shown that a fan of ejections may arise by interaction of a spherical shock wave with dense cloudlets situated in the neighbourhood of the shock's source. The mechanism of formation of ejections is based on the well-known cumulative effect arising in converging conical flows.

Wounding capacity of muzzle-gas pressure.

PubMed

Schyma, Christian

2012-05-01

Suicidal gunshot wounds that are caused by ammunition fired from a 9-mm Luger pistol, with direct contact between the gun muzzle and the victim's head, present a serious injury pattern even with full metal jacket bullets. Wound ballistic experiments were performed to clarify whether muzzle gases from the firearm have an additional wounding potential. Fifteen head models were prepared as follows: an acryl sphere measuring 14 cm in diameter was completely covered with a layer of silicon that was 3 mm thick. These spheres were filled with 10% gelatine. At 4°C, these models were fired at with a 9-mm Luger pistol, loaded with Quick Defense 1 expanding bullets. Five shots were fired with direct muzzle contact, one shot was fired from a distance of 10 cm, four shots were fired from a distance of 2 m, and five shots were fired from a distance of 4 m. Each projectile penetrated the model; all but one projectile deformed regularly. Each acryl sphere shattered into comminuted pieces but was held together by the silicon cover. The gelatine filling was then cut into slices 1 cm thick, and each slice was optically scanned. An evaluation was performed following both Fackler's Wound Profile method and the polygon procedure method. The pattern of gelatine disruption did not differ in shots from intermediate ranges, but the amount of gelatine destruction was always more extended in the case of muzzle contact shots. Depending on the section of the bullet path, crack lengths were 31% to 133% longer in contact shots. The first centimetre and the second half of the bullet path showed the greatest increase. The experimental findings prove the wounding capacity of muzzle gases.

21 CFR 347.50 - Labeling of skin protectant drug products.

Code of Federal Regulations, 2011 CFR

2011-04-01

...: ‘[bullet] rashes’ ‘[bullet] eczema’ ‘[bullet] poison ivy, oak, or sumac’ ‘[bullet] insect bites’].” (5) For... irritation and itching due to: [select one or more of the following: ‘rashes’ or ‘eczema’].” [If both...

21 CFR 347.50 - Labeling of skin protectant drug products.

Code of Federal Regulations, 2012 CFR

2012-04-01

...: ‘[bullet] rashes’ ‘[bullet] eczema’ ‘[bullet] poison ivy, oak, or sumac’ ‘[bullet] insect bites’].” (5) For... irritation and itching due to: [select one or more of the following: ‘rashes’ or ‘eczema’].” [If both...

21 CFR 347.50 - Labeling of skin protectant drug products.

Code of Federal Regulations, 2013 CFR

2013-04-01

...: ‘[bullet] rashes’ ‘[bullet] eczema’ ‘[bullet] poison ivy, oak, or sumac’ ‘[bullet] insect bites’].” (5) For... irritation and itching due to: [select one or more of the following: ‘rashes’ or ‘eczema’].” [If both...

21 CFR 347.50 - Labeling of skin protectant drug products.

Code of Federal Regulations, 2014 CFR

2014-04-01

...: ‘[bullet] rashes’ ‘[bullet] eczema’ ‘[bullet] poison ivy, oak, or sumac’ ‘[bullet] insect bites’].” (5) For... irritation and itching due to: [select one or more of the following: ‘rashes’ or ‘eczema’].” [If both...

Ballistics reviews: mechanisms of bullet wound trauma.

PubMed

Maiden, Nicholas

2009-01-01

The location of an entrance wound (bullet placement) and the projectile path are the most important factors in causing significant injury or death following a shooting. The head followed by the torso are the most vulnerable areas, with incapacitation resulting from central nervous system (brain or cord) disruption, or massive organ destruction with hemorrhage. Tissue and organ trauma result from the permanent wound cavity caused by direct destruction by the bullet, and also from radial stretching of surrounding tissues causing a temporary wound cavity. The extent of tissue damage is influenced by the type of bullet, its velocity and mass, as well as the physical characteristics of the tissues. The latter includes resistance to strain, physical dimensions of an organ, and the presence or absence of surrounding anatomical constraints. Bullet shape and construction will also affect tissue damage and bullets which display greater yaw will be associated with increased temporary cavitation. Military bullet designs do not include bullets that will expand or flatten as these cause greater wound trauma and are regulated by convention.

Ballistic Reconstruction of a Migrating Bullet in the Parapharyngeal Space

PubMed Central

Bächinger, David; Bolliger, Stephan; Huber, Gerhard F.; Laske, Roman D.

2015-01-01

A 21-year-old male suffering from severe throat pain after being hit by a bullet in Syria claimed that he was shot through his eye and that the bullet subsequently descended behind his throat. Even though the first medical report stated that this course is implausible, meticulous workup provided evidence that the bullet might have entered the parapharyngeal space in a more cranial position than the one it was found eight months later. Our case highlights that bullets are able to move within the body, rendering ballistic reconstruction difficult. However, after removal of the bullet the patient's symptoms completely resolved. PMID:26770857

[The forensic medical characteristics of the entrance bullet holes created by the shots from pneumatic rifles].

PubMed

Legin, G A; Bondarchuk, A O; Perebetjuk, A N

2015-01-01

The objective of the present study was to compare the injurious action of three types of the bullets for the pneumatic weapons shot from different distances using the Gamo pump air pistol and the BAM B22-1 pneumatic rifle. The following four kinds of the bullets were tested: "the fireball", "Luman cap 0.3", "Luman Field Target 0.68" and "DIABOLO". It was experimentally shown that the injurious action of the bullets fired from the same distance from the pneumatic weapons depends on the type of both the bullet and the weapon, as well as the properties of the target material. Specifically, the action of bullets fired from the piston pneumatic rifle remained stable whereas that of the bullets shot from the gas-balloon air pistol decreased as the gas was exhausted. The studies by the contact-diffusion method have demonstrated that the entrance bullet holes created by the shots from pneumatic weapons are surrounded by dispersed metal particles which makes it possible to estimate the shooting distance. Moreover, the bullets fired from the pneumatic weapons leave the muzzle face imprint on certain target materials.

Ballistics of the 30-06 Rifle Cartridge

DTIC Science & Technology

2012-11-30

manuals for common bullet weights. Hodgdon, Nosler, and Barnes report velocities for 24" barrels . Hornady and Speer report velocoties for 22" barrels ...The data are all for barrels with a twist rate of 1 turn in 10” which is needed to stabilize the heaviest bullets. The higher muzzle velocities...are available that provide 2900 fps for 150 grain bullets, 2800 fps for 165 grain bullets, and 2700 fps for 180 grain bullets (in a 24 inch barrel

A systematic review on ricochet gunshot injuries.

PubMed

Yong, Yuw-Er

2017-05-01

Ricocheted bullets may still retain sufficient kinetic energy to cause gunshot injuries. Accordingly, this paper reviews the literature surrounding gunshot injuries caused by ricocheted bullets. In doing so, it discusses the characteristics of ricochet entrance wounds and wound tracks, noting several important considerations for assessment of a possible ricochet incident. The shapes of ricochet entrance wounds vary, ranging from round holes to elliptical, large and irregular shapes. Pseudo-stippling or pseudo-gunpowder tattooing, pseudo-soot blackening and tumbling abrasions seen on the skin surrounding the bullet hole are particularly associated with ricochet incidents. Ricocheted bullets have a reduced capability for tissue penetration. Most of the resulting wound tracks are short, of large diameter and irregular-all artefacts of the instability of a bullet that has ricocheted. A ricocheted hollow-point bullet, in particular, may overpenetrate the tissue when the bullet nose is deformed or fails to enter the body in a nose-forward orientation. Similarly, internal ricochet may occur when a bullet strikes hard tissue. Postmortem computed tomographic imaging is useful for localising a bullet and its fragments in the body and characterising the wound track. Ricochet cannot be ruled out in normal-appearing entrance wounds unless that finding is supported by other evidence, including the geometrical constraints of the shooting scene and the absence of ricochet marks and a ricocheted bullet. Copyright © 2017 Elsevier B.V. All rights reserved.

A systematic examination of the bone destruction pattern of the two-shot technique

PubMed Central

Stoetzer, Marcus; Stoetzer, Carsten; Rana, Majeed; Zeller, Alexander; Hanke, Alexander; Gellrich, Nils-Claudius; von See, Constantin

2014-01-01

Introduction: The two-shot technique is an effective stopping power method. The precise mechanisms of action on the bone and soft-tissue structures of the skull; however, remain largely unclear. The aim of this study is to compare the terminal ballistics of the two-shot and single-shot techniques. Materials and Methods: 40 fresh pigs’ heads were randomly divided into 4 groups (n = 10). Either a single shot or two shots were fired at each head with a full metal jacket or a semi-jacketed bullet. Using thin-layer computed tomography and photography, the diameter of the destruction pattern and the fractures along the bullet path were then imaged and assessed. Results: A single shot fired with a full metal jacket bullet causes minor lateral destruction along the bullet path. With two shots fired with a full metal jacket bullet, however, the maximum diameter of the bullet path is significantly greater (P < 0.05) than it is with a single shot fired with a full metal jacket bullet. In contrast, the maximum diameter with a semi-jacketed bullet is similar with the single-shot and two-shot techniques. Conclusion: With the two-shot technique, a full metal jacket bullet causes a destruction pattern that is comparable to that of a single shot fired with a semi-jacketed bullet. PMID:24812454

Developing Battery Computer Aided Engineering Tools for Military Vehicles

DTIC Science & Technology

2013-12-01

Task 1.b Modeling Bullet penetration. The purpose of Task 1.a was to extend the chemical kinetics models of CoO2 cathodes developed under CAEBAT to...lithium- ion batteries. The new finite element model captures swelling/shrinking in cathodes /anodes due to thermal expansion and lithium intercalation...Solid Electrolyte Interphase (SEI) layer decomposition 80 2 Anode — electrolyte 100 3 Cathode — electrolyte 130 4 Electrolyte decomposition 180

Possible influences on bullet trajectory deflection in ballistic gelatine.

PubMed

Riva, Fabiano; Kerkhoff, Wim; Bolck, Annabel; Mattijssen, Erwin J A T

2017-02-01

The influence of the distance to the top and bottom of a gelatine block and to bullet tracks from previously fired shots on a bullet's trajectory, when passing through ballistic gelatine, was studied. No significant difference in deflection was found when trajectories of 9mm Luger bullets, fired at a 3.5cm distance to the top and bottom of a gelatine block and to bullet tracks from previously fired shots, were compared to trajectories of bullets fired 7cm or more away from any of the aforementioned aspects. A surprisingly consistent 6.5° absolute deflection angle was found when these bullets passed through 22.5 to 23.5cm of ballistic gelatine. The projection angle, determined by the direction of the deflection, appeared to be random. The consistent absolute angle, in combination with the random projection angle, resulted in a cone-like deflection pattern. Copyright © 2017 Elsevier Ireland Ltd. All rights reserved.

The experimental and numerical investigation of pistol bullet penetrating soft tissue simulant.

PubMed

Wang, Yongjuan; Shi, Xiaoning; Chen, Aijun; Xu, Cheng

2015-04-01

Gelatin, a representative simulant for soft tissue of the human body, was used to study the effects of 9 mm pistol bullet's penetration. The behavior of a bullet penetrating gelatin was quantified by the temporary cavity sizes in ballistic gelatin and the pressure values of bullet's impact. A numerical simulation model of a bullet penetrating the soft tissue simulant gelatin was built using the finite element method (FEM). The model was validated by the comparison between the numerical results and the experimental results. During a bullet penetrating ballistic gelatin, four stages were clearly observed in both the experiment and the numerical simulation: a smooth attenuation stage, a rolling stage, a full penetration stage, and a stage of expansion and contraction. The cavity evolution, equivalent stress field and the strain field in gelatin were analyzed by numerical simulation. Moreover, the effects of the bullet's impact velocities and angles of incidence on the temporary cavity in gelatin, its velocity attenuation, and its rolling angle were investigated, as well as the bullet's resistance and energy variation. The physical process and the interactive mechanism during a pistol bullet penetrating gelatin were comprehensively revealed. This may be significant for research in wound ballistics. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Viability of Bismuth as a Green Substitute for Lead in Jacketed .357 Magnum Revolver Bullets

NASA Astrophysics Data System (ADS)

Jenkins, Joel

In seeking to develop environmentally friendly lead-free non-toxic bullets, the research ballistically evaluated the performance of copper-jacketed handgun bullets containing a pure bismuth core. The lead was first removed from 140 grain Hornady(TM) XTPRTM bullets of 38 caliber (.357 diameter) by melting. The empty jackets were then refilled with pure bismuth, including the forming of a correctly sized hollow-point cavity. Due to the lower density of bismuth as compared to lead, the bismuth-cored bullets consistently weighed 125 gains. Conveniently this allowed direct comparison to commercially available 125 grain Hornady(TM) XTPRTM lead-cored bullets of 38 caliber. Both bismuth-cored and lead-cored versions of the 125 grain bullets had identical nose dimensions and jacket material, the only dimensional difference being the bullet length below the cannelure. Shooting took place at an outdoor range using a 357 Magnum Ruger(TM) SP101RTM revolver with 3" barrel as the test weapon. FBI protocols were followed when firing through clothing, wallboard, plywood, steel plates and laminated glass. Wound paths and bullets were captured in ballistic gelatin, with data collected for velocity, penetration, expansion, and weight retention. Bismuth compared favorably with lead in all but the laminated glass test, where it under penetrated due to jacket separation.

21 CFR 358.650 - Labeling of pediculicide drug products.

Code of Federal Regulations, 2012 CFR

2012-04-01

... hair at a time [bullet] unlike dandruff which moves when touched, nits stick to the hair [bullet] if... products “Treat [in bold type] [bullet] apply thoroughly to (optional, may add “dry”) hair or other... [bullet] for head lice, towel dry hair and comb out tangles”. (ii) For nonshampoo products “Treat [in bold...

21 CFR 358.650 - Labeling of pediculicide drug products.

Code of Federal Regulations, 2011 CFR

2011-04-01

... hair at a time [bullet] unlike dandruff which moves when touched, nits stick to the hair [bullet] if... products “Treat [in bold type] [bullet] apply thoroughly to (optional, may add “dry”) hair or other... [bullet] for head lice, towel dry hair and comb out tangles”. (ii) For nonshampoo products “Treat [in bold...

21 CFR 358.650 - Labeling of pediculicide drug products.

Code of Federal Regulations, 2013 CFR

2013-04-01

... hair at a time [bullet] unlike dandruff which moves when touched, nits stick to the hair [bullet] if... products “Treat [in bold type] [bullet] apply thoroughly to (optional, may add “dry”) hair or other... [bullet] for head lice, towel dry hair and comb out tangles”. (ii) For nonshampoo products “Treat [in bold...

21 CFR 358.650 - Labeling of pediculicide drug products.

Code of Federal Regulations, 2014 CFR

2014-04-01

... hair at a time [bullet] unlike dandruff which moves when touched, nits stick to the hair [bullet] if... products “Treat [in bold type] [bullet] apply thoroughly to (optional, may add “dry”) hair or other... [bullet] for head lice, towel dry hair and comb out tangles”. (ii) For nonshampoo products “Treat [in bold...

34 CFR Appendix C to Part 300 - National Instructional Materials Accessibility Standard (NIMAS)

Code of Federal Regulations, 2013 CFR

2013-07-01

... + “-NIMAS”—exact format to be determined). dc:Language (one instance, or multiple in the case of a foreign.../ c. Block elements author Identifies the writer of a work other than this one. Contrast with , which... heading (generally only one, possibly with ), and an intermixture of list items and . If bullets and...

34 CFR Appendix C to Part 300 - National Instructional Materials Accessibility Standard (NIMAS)

Code of Federal Regulations, 2012 CFR

2012-07-01

... + “-NIMAS”—exact format to be determined). dc:Language (one instance, or multiple in the case of a foreign.../ c. Block elements author Identifies the writer of a work other than this one. Contrast with , which... heading (generally only one, possibly with ), and an intermixture of list items and . If bullets and...

34 CFR Appendix C to Part 300 - National Instructional Materials Accessibility Standard (NIMAS)

Code of Federal Regulations, 2014 CFR

2014-07-01

... + “-NIMAS”—exact format to be determined). dc:Language (one instance, or multiple in the case of a foreign.../ c. Block elements author Identifies the writer of a work other than this one. Contrast with , which... heading (generally only one, possibly with ), and an intermixture of list items and . If bullets and...

Three-dimensional light bullets in a Bragg medium with carbon nanotubes

NASA Astrophysics Data System (ADS)

Zhukov, Alexander V.; Bouffanais, Roland; Belonenko, Mikhail B.; Dvuzhilov, Ilya S.; Nevzorova, Yulia V.

2017-07-01

We present a theoretical study of the propagation of three-dimensional extremely short electromagnetic pulses (a.k.a. light bullets) through a Bragg medium containing an immersed array of carbon nanotubes. We demonstrate the possible stable propagation of such light bullets. In particular, our results suggest these light bullets can carry information about the Bragg medium itself.

Curvilinear trajectory estimation of a supersonic bullet using ballistic shock wave arrivals at asynchronous acoustic sensor nodes.

PubMed

Lo, Kam W

2017-06-01

The trajectory of a supersonic bullet, which is subjected to drag and gravity, is curvilinear and the supersonic flight of the bullet generates a ballistic shock wave (SW). A model for the differential time of arrival (DTOA) of the SW at a pair of acoustic sensors is derived for a given bullet trajectory, which is fully described by seven parameters including the drag coefficient exponent and ballistic constant of the bullet. Assuming that the drag coefficient exponent is 0.5, the DTOA model is used to develop a nonlinear least-squares (NLS) method to estimate the other six trajectory parameters using DTOA of SW measurements from each node (which comprises a small acoustic sensor array) of an asynchronous sensor network. The position of the shooter and the muzzle speed of the bullet are then determined by tracing the estimated bullet trajectory back to topographic or man-made obstructions on a digital map. The effectiveness of the NLS method is verified using simulated data for different types of real bullets, and the error standard deviations in the parameter estimates are close to the Cramer-Rao lower bounds.

A Ballistics Examination of Firearm Injuries Involving Breast Implants.

PubMed

Pannucci, Christopher J; Cyr, Adam J; Moores, Neal G; Young, Jason B; Szegedi, Martin

2018-03-01

This ballistics study examines whether saline breast implants can decrease tissue penetration in firearm injuries. We hypothesize that the fluid column within a saline breast implant can alter bullet velocity and/or bullet pattern of mushrooming. The two experimental groups included saline implants with 7.4 cm projection and a no implant group. The experimental design allowed the bullet to pass-through an implant and into ballistics gel (n = 10) or into ballistics gel without passage through an implant (n = 11). Shots that passed through an implant had 20.6% decreased penetration distance when compared to shots that did not pass-through an implant; this difference was statistically significant (31.9 cm vs. 40.2 cm, p < 0.001). Implant group bullets mushroomed prior to gel entry, but the no implant group mushroomed within the gel. Bullet passage through a saline breast implant results in direct bullet velocity reduction and earlier bullet mushrooming; this causes significantly decreased ballistics gel penetration. © 2017 American Academy of Forensic Sciences.

Rubber bullet injury: case report with autopsy observation and literature review.

PubMed

Kobayashi, Masahiko; Mellen, Paul F

2009-09-01

Rubber bullets are one of the less-lethal (nonlethal) weapons, which are increasingly used to incapacitate dangerous individuals, avoiding use of firearms. An autopsy examination of a man who was shot with improved rubber bullets revealed that the bullet caused pulmonary contusion. The bullet was 30 g in weight and consisted of a sponge foam nose with 40-mm diameter and a plastic body. He was not incapacitated and died of suicidal gunshot wound. The case raised a question as to how severe an injury is necessary to deter a person without causing death. A variety of rubber bullets have been used in the world, and they have occasionally produced severe or lethal injuries. A review of the literature demonstrated that the feature of injuries appeared to be related to the type of missile. It becomes more important for a forensic pathologist to be familiar with rubber bullets and injuries caused by them as the use of less-lethal weapon increases.

EDITORIAL: Fluctuations and noise in photonics and quantum optics: a special issue in memory of Hermann Haus

NASA Astrophysics Data System (ADS)

Abbott, Derek; Shapiro, Jeffrey H.; Yamamoto, Yoshihisa

2004-08-01

This Special Issue of Journal of Optics B: Quantum and Semiclassical Optics brings together the contributions of various researchers working on theoretical and experimental aspects of fluctuational phenomena in photonics and quantum optics. The topics discussed in this issue extend from fundamental physics to applications of noise and fluctuational methods from quantum to classical systems, and include: bullet Quantum measurement bullet Quantum squeezing bullet Solitons and fibres bullet Gravitational wave inferometers bullet Fluorescence phenomena bullet Cavity QED bullet Photon statistics bullet Noise in lasers and laser systems bullet Quantum computing and information bullet Quantum lithography bullet Teleportation. This Special Issue is published in connection with the SPIE International Symposium on Fluctuations and Noise, held in Santa Fe, New Mexico, on 1-4 June 2003. The symposium contained six parallel conferences, and the papers in this Special Issue are connected to the conference entitled `Fluctuations and Noise in Photonics and Quantum Optics'. This was the first in a series of symposia organized with the support of the SPIE that have greatly contributed to progress in this area. The co-founders of the symposium series were Laszlo B Kish (Texas A&M University) and Derek Abbott (The University of Adelaide). The Chairs of the `Fluctuations and Noise in Photonics and Quantum Optics' conference were Derek Abbott, Jeffrey H Shapiro and Yoshihisa Yamamoto. The practical aspects of the organization were ably handled by Kristi Kelso and Marilyn Gorsuch of the SPIE, USA. Sadly, less than two weeks before the conference, Hermann A Haus passed away. Hermann Haus was a founding father of the field of noise in optics and quantum optics. He submitted three papers to the conference and was very excited to attend; as can be seen in the collection of papers, he was certainly present in spirit. In honour of his creativity and pioneering work in this field, we have dedicated this Special Issue to him. The first item is an obituary reflecting on his life and work. The first technical paper in this issue represents Hermann’s last sole author publication; a special thanks is due to A P Flitney for organizing this manuscript into publishable form. We thank the members of the International Programme Committee, listed below, and all those who contributed to making the event such a success. At this point we take the opportunity to express our gratitude to both the authors and reviewers, for their unfailing efforts in preparing and ensuring the high quality of the papers in this Special Issue. International Programme Committee David A Cardimona Air Force Research Laboratory, USA Howard Carmichael University of Auckland, New Zealand Carlton M Caves University of New Mexico, Albuquerque, USA Peter D Drummond University of Queensland, St Lucia, Australia Paul J Edwards University of Canberra, Australia Luca Gammaitoni Università degli Studi di Perugia, Italy Brage Golding Michigan State University, East Lansing, USA Gabriela Gonzalez Louisiana State University, Baton Rouge, USA Guangcan Guo University of Science and Technology of China, Hefei, China Salman Habib Los Alamos National Laboratory, NM, USA Murray Hamilton University of Adelaide, Australia Bei-Lok Hu University of Maryland/College Park, USA Daniel K Johnstone Virginia Commonwealth University, Richmond, USA Franz X Kärtner Massachusetts Institute of Technology, Cambridge, USA Prem Kumar Northwestern University, Evanston, IL, USA Zachary Lemnios DARPA, Arlington, VA, USA Gerd Leuchs Friedrich-Alexander Universität Erlangen--Nürnberg, Germany Hideo Mabuchi California Institute of Technology, Pasadena, USA Peter W Milonni Los Alamos National Laboratory, NM, USA Adrian C Ottewill University College Dublin, Ireland Martin B Plenio Imperial College, London, UK Rajeev J Ram Massachusetts Institute of Technology, Cambridge, USA Farhan Rana Massachusetts Institute of Technology, Cambridge, USA Peter R Smith Loughborough University of Technology, UK Rodney S Tucker University of Melbourne, Australia Howard M Wiseman Griffith University, Brisbane, Australia Stuart A Wolf DARPA, Arlington, VA, USA Anton Zeilinger University of Vienna, Austria Xi-Cheng Zhang Rensselaer Polytechnic Institute, Troy, NY, USA

Determining tissue-lead levels in large game mammals harvested with lead bullets: human health concerns.

PubMed

Tsuji, L J S; Wainman, B C; Jayasinghe, R K; VanSpronsen, E P; Liberda, E N

2009-04-01

Recently, the use of lead isotope ratios has definitively identified lead ammunition as a source of lead exposure for First Nations people, but the isotope ratios for lead pellets and bullets were indistinguishable. Thus, lead-contaminated meat from game harvested with lead bullets may also be contributing to the lead body burden; however, few studies have determined if lead bullet fragments are present in big game carcasses. We found elevated tissue-lead concentrations (up to 5,726.0 microg/g ww) in liver (5/9) and muscle (6/7) samples of big game harvested with lead bullets and radiographic evidence of lead fragments. Thus, we would advise that the tissue surrounding the wound channel be removed and discarded, as this tissue may be contaminated by lead bullet fragments.

CALL FOR PAPERS: Optical solitons

NASA Astrophysics Data System (ADS)

Drummond, P. D.; Haelterman, Marc; Vilaseca, R.

2003-06-01

A topical issue of Journal of Optics B: Quantum and Semiclassical Optics will be devoted to recent advances in optical solitons. The topics to be covered will include, but are not limited to: bulletProperties, control and dynamics of temporal solitons bulletProperties, control and dynamics of spatial solitons bulletCavity solitons in passive and active resonators bulletThree-dimensional spatial solitons bulletDark, bright, grey solitons; interface dynamics bulletCompound or vector solitons; incoherent solitons bulletLight and matter solitons in BEC bulletNonlinear localized structures in microstructured and nanostructured materials (photonic crystals, etc) bulletAngular momentum effects associated with localized light structures; vortex solitons bulletQuantum effects associated with localized light structures bulletInteraction of solitons with atoms and other media bulletApplications of optical solitons The DEADLINE for submission of contributions is 31 July 2003 to allow the topical issue to appear in about February 2004. All papers will be peer-reviewed in accordance with the normal refereeing procedures and standards of Journal of Optics B: Quantum and Semiclassical Optics. Advice on publishing your work in the journal may be found at www.iop.org/journals/authors/jopb. Submissions should ideally be in either standard LaTeX form or Microsoft Word. There are no page charges for publication. In addition to the usual 50 free reprints, the corresponding author of each paper published will receive a complimentary copy of the topical issue. Contributions to the topical issue should if possible be submitted electronically at www.iop.org/journals/jopb. or by e-mail to jopb@iop.org. Authors unable to submit online or by e-mail may send hard copy contributions (enclosing the electronic code) to: Dr Claire Bedrock (Publisher), Journal of Optics B: Quantum and Semiclassical Optics, Institute of Physics Publishing, Dirac House, Temple Back, Bristol BS1 6BE, UK. All contributions should be accompanied by a readme file or covering letter, quoting `JOPB topical issue - Optical Solitons', giving the postal and e-mail addresses for correspondence. Any subsequent change of address should be notified to the publishing office. We look forward to receiving your contribution to this topical issue.

Inconsistency in 9 mm bullets: correlation of jacket thickness to post-impact geometry measured with non-destructive X-ray computed tomography.

PubMed

Thornby, John; Landheer, Dirk; Williams, Tim; Barnes-Warden, Jane; Fenne, Paul; Norman, Danielle G; Attridge, Alex; Williams, Mark A

2014-01-01

Fundamental to any ballistic armour standard is the reference projectile to be defeated. Typically, for certification purposes, a consistent and symmetrical bullet geometry is assumed, however variations in bullet jacket dimensions can have far reaching consequences. Traditionally, characteristics and internal dimensions have been analysed by physically sectioning bullets--an approach which is of restricted scope and which precludes subsequent ballistic assessment. The use of a non-destructive X-ray computed tomography (CT) method has been demonstrated and validated (Kumar et al., 2011 [15]); the authors now apply this technique to correlate bullet impact response with jacket thickness variations. A set of 20 bullets (9 mm DM11) were selected for comparison and an image-based analysis method was employed to map jacket thickness and determine the centre of gravity of each specimen. Both intra- and inter-bullet variations were investigated, with thickness variations of the order of 200 μm commonly found along the length of all bullets and angular variations of up to 50 μm in some. The bullets were subsequently impacted against a rigid flat plate under controlled conditions (observed on a high-speed video camera) and the resulting deformed projectiles were re-analysed. The results of the experiments demonstrate a marked difference in ballistic performance between bullets from different manufacturers and an asymmetric thinning of the jacket is observed in regions of pre-impact weakness. The conclusions are relevant for future soft armour standards and provide important quantitative data for numerical model correlation and development. The implications of the findings of the work on the reliability and repeatability of the industry standard V50 ballistic test are also discussed. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

[Morphology of bullet wounds when using police ammunition, type QD-P.E.P].

PubMed

Stein, Kirsten Marion; Wagner, Thomas; Ain, Stephan

2006-01-01

6 years after introduction of the police ammunition QD-P.E.P. (9 mm caliber), 9 bullet wounds are presented from forensic investigations along with the results of experimental shots at pig carcasses. The evaluation reveals the characteristic pattern of such bullet wounds: a skin defect which is almost as large as the caliber and has a sharp-edged border thus looking like it has been punched out; the contusion ring ("abrasion ring") is conspicuously narrow. These findings can be explained by the shape and design of the projectile. In regular police work immediate incapacitation has not always been achieved, depending on the entry location of the bullet. Experimental shots at pig carcasses showed that in the case of shots at extremities, the residual energy of the exiting bullet may be sufficient to generate another penetrating bullet wound.

A study of ignition by rifle bullets

Treesearch

Mark A. Finney; Trevor B. Maynard; Sara S. McAllister; Ian J. Grob

2013-01-01

Experiments were conducted to examine the potential for rifle bullets to ignite organic matter after impacting a hard surface. The tests were performed using a variety of common cartridges (7.62x51, 7.62x39, 7.62x54R, and 5.56x45) and bullet materials (steel core, lead core, solid copper, steel jacket, and copper jacket). Bullets were fired at a steel plate that...

Polarization resolved electric field measurements on plasma bullets in N2 using four-wave mixing

NASA Astrophysics Data System (ADS)

van der Schans, Marc; Boehm, Patrick; Nijdam, Sander; Ijzerman, Wilbert; Czarnetzki, Uwe

2016-09-01

Atmospheric pressure plasma jets generated by kHz AC or pulsed DC voltages typically consist of discrete guided ionization waves called plasma bullets. In this work, the electric field of plasma bullets generated in a pulsed DC jet with N2 as feed gas is investigated using the four-wave mixing method. In this diagnostic two laser beams, where one is Stokes shifted from the other, non-linearly interact with the N2 molecules and the bullet's electric field. As a result of the interaction a coherent anti-Stokes Raman scattered (CARS) beam and an infrared beam are generated from which the electric field can be determined. Compared to emission-based methods, this technique has the advantage of being able to also probe the electric field in regions around the plasma bullet where no photons are emitted. The four-wave mixing method and its analysis have been adapted to work with the non-uniform electric field of plasma bullets. In addition, an ex-situ calibration procedure using an electrode geometry different from the discharge geometry has been developed. An experimentally obtained radial profile of the axial electric field component of a plasma bullet in N2 is presented. The position of this profile is related to the location of the propagating bullet from temporally resolved images.

21 CFR 347.52 - Labeling of astringent drug products.

Code of Federal Regulations, 2011 CFR

2011-04-01

... states “[bullet] dissolve 1 to 3 packets in [insert volume] of cool or warm water [bullet] stir until... [bullet] stir until fully dissolved; do not strain or filter. The resulting mixture contains [insert...

The forensic aspects of contemporary disintegrating rifle bullets.

PubMed

Haag, Lucien C

2013-03-01

A relatively new type of rifle bullet has appeared in the last few years that contains no lead and rapidly disintegrates into very small particles and jacket fragments immediately upon entry into soft tissue. These bullets are intended for use by 'varmint' hunters in high-velocity centerfire rifles where the effect on such animals as prairie dogs, gophers, ground hogs, and other similarly sized animals is nothing short of explosive. The shooting of much larger animals to include human beings will typically result in nonperforating wounds with short wound paths. X-ray views of a decedent or gunshot victim will lack any recognizable bullet or projectile. Only 1 jacket fragment among the many present in the wound tract is suitable for subsequent firearms identification purposes, namely, the small copper disc that represents the base or heel of the bullet jacket. This small circular fragment bears vestiges of the rifling marks of the responsible firearm.This article will aid the forensic pathologist in recognizing gunshot wounds produced by these atypical bullets and the importance of recovering the base portion of the disintegrated bullet jacket.

21 CFR 201.66 - Format and content requirements for over-the-counter (OTC) drug product labeling.

Code of Federal Regulations, 2013 CFR

2013-04-01

...: “[Bullet] side effects occur. You may report side effects to FDA at 1-800-FDA-1088.” The telephone number... means any component that is intended to furnish pharmacological activity or other direct effect in the... specified activity or effect. (3) Approved drug application means a new drug (NDA) or abbreviated new drug...

21 CFR 201.66 - Format and content requirements for over-the-counter (OTC) drug product labeling.

Code of Federal Regulations, 2012 CFR

2012-04-01

...: “[Bullet] side effects occur. You may report side effects to FDA at 1-800-FDA-1088.” The telephone number... means any component that is intended to furnish pharmacological activity or other direct effect in the... specified activity or effect. (3) Approved drug application means a new drug (NDA) or abbreviated new drug...

The Quick-Reference Handbook for School Leaders: A Practical Guide for Principals

ERIC Educational Resources Information Center

Corwin Press, 2005

2005-01-01

This ready-reference school management tool is a practical guide that provides an answer to the questions "Where do I start?" and "Where do I look for direction?" Written in an easy-to-read, bulleted format, the handbook is an excellent resource for all principals, assistant principals, and aspiring school administrators. With words of wisdom from…

Ballistics Modeling for Non-Axisymmetric Hypervelocity Smart Bullets

DTIC Science & Technology

2014-06-03

can in principle come from experiments or computational fluid dynamics ( CFD ) calculations. CFD calculations are carried out for a standard bullet...come from experiments or com- putational fluid dynamics ( CFD ) calculations. CFD calculations are carried out for a standard bullet (0.308” 168 grain...11 2. Spin and Pitch Damping 11 3. Magnus Moment 12 IV. CFD Simulations and Ballistic Trajectories 12 A. CFD Modeling of a Standard Bullet 12 B

Complete endoscopic management of a retained bullet in the bladder.

PubMed

Friedman, Ariella A; Trinh, Quoc-Dien; Kaul, Sanjeev; Bhandari, Akshay

2013-01-01

A 25-year-old male gunshot victim presented at our institution with gross hematuria following Foley catheter insertion. Computed tomography and cystogram did not show a bladder perforation, but were notable for a left ischial fracture and the presence of a bullet within the bladder. After failed attempts at retrieving the bullet with a resectoscope and loop, as well as a cystoscope and stone crusher, a 26 French nephroscope was inserted transurethrally, and the bullet was successfully engaged and removed using a Perc NCircle (Cook Medical, Bloomington, IN) grasper. The extra-peritoneal injury was managed conservatively with catheter drainage. To our knowledge, this represents the first case of successful transurethral management of a retained intravesical bullet. Such an approach may benefit patients with retained intravesical bullets or other challenging intravesical foreign bodies and may be helpful in select circumstances to spare patients from more extensive surgeries.

On the reliable probing of discrete ‘plasma bullet’ propagation

NASA Astrophysics Data System (ADS)

Svarnas, P.; Gazeli, K.; Gkelios, A.; Amanatides, E.; Mataras, D.

2018-04-01

This report is devoted to the imaging of the spatiotemporal evolution of ‘plasma bullets’ during their propagation at atmospheric pressure. Although numerous studies have been realized on this topic with high gating rate cameras, triggering issues and statistical analyses of single-shot events over different cycles of the driving high voltage have not been discussed properly. The present work demonstrates the related difficulties faced due to the inherently erratic propagation of the bullets. A way of capturing and statistically analysing discrete bullet events is introduced, which is reliable even when low gating rate cameras are used and multiple bullets are formed within the voltage cycle. The method is based on plasma observations by means of two photoelectron multiplier tubes. It is suggested that these signals correlate better with bullet propagation events than the driving voltage or bullet current waveforms do, and allow either the elimination of issues arising from erratic propagation and hardware delays or at least the quantification of certain uncertainties. Herein, the entire setup, the related concept and the limits of accuracy are discussed in detail. Snapshots of the bullets are captured and commented on, with the bullets being produced by a sinusoidally driven single-electrode plasma jet reactor operating with helium. Finally, the instantaneous velocities of bullets on the order of 104-105 m s-1 are measured and propagation phases are distinguished in good agreement with the bibliography.

Quantitative/Statistical Approach to Bullet-to-Firearm Identification with Consecutively Manufactured Barrels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peter Striupaitis; R.E. Gaensslen

Efforts to use objective image comparison and bullet scanning technologies to distinguish bullets from consecutively manufactured handgun barrels from two manufacturers gave mixed results. The ability of a technology to reliably distinguish between matching and non-matching bullets, where the non-matching bullets were as close in pattern to the matching ones as is probably possible, would provide evidence that the distinctions could be made ''objectively'', and independently of human eyes. That evidence is identical or very close to what seems to be needed to satisfy Daubert standards. It is fair to say that the FTI IBIS image comparison technology correctly distinguishedmore » between all the Springfield barrel bullets, and between most but not all of the HiPoint barrel bullets. In the HiPoint cases that were not distinguished 100% of the time, they would he distinguished correctly at least 83% of the time. These results, although obviously limited to the materials used in the comparisons, provide strong evidence that barrel-to-bullet matching is objectively reliable. The results with SciClops were less compelling. The results do not mean that bullet-to-barrel matching is not objectively reliable--rather, they mean that this version of the particular technology could not quite distinguish between these extremely similar yet different bullets as well as the image comparison technology did. In a number of cases, the numerical results made the correct distinctions, although they were close to one another. It is hard to say from this data that this technology differs in its ability to make distinctions between the manufacturers, because the results are very similar with both. The human examiner results were as expected. We did not expect any misidentifications, and there were not any. It would have been preferable to have a higher return rate, and thus more comparisons in the overall sample. As noted, the ''consecutively manufactured barrel exercise'' has been done before, with the same outcome.« less

[The determination of the ballistics of a hunting rifle loaded with a Poleva-3 bullet].

PubMed

Svetlakov, A V; Sotin, A V; Nagornov, M N

2014-01-01

Various approaches are considered to determine the shooting range of a hunting rifle loaded with a Poleva-3 bullet from the specific features of gunshot injuries inflicted by container-type Poleba-3 bullets for hunting rifles.

Long Wavelength Electromagnetic Light Bullets Generated by a 10.6 micron CO2 Ultrashort Pulsed Source

DTIC Science & Technology

2016-11-29

AFRL-AFOSR-VA-TR-2016-0365 Long Wavelength Electromagnetic Light Bullets Generated by a 10.6 micron CO2 Ultrashort Pulsed Source Jerome Moloney...SUBTITLE "Long Wavelength Electromagnetic Light Bullets Generated by a 10.6 micron CO2 Ultrashort Pulsed Source 5a. CONTRACT NUMBER FA9550-15-1-0272 5b...afosr.reports.sgizmo.com/s3/> Subject: Final Report to Dr. Arje Nachman Contract/Grant Title: Long Wavelength Electromagnetic Light Bullets Generated by a 10.6

Hunting of roe deer and wild boar in Germany: Is non-lead ammunition suitable for hunting?

PubMed

Martin, Annett; Gremse, Carl; Selhorst, Thomas; Bandick, Niels; Müller-Graf, Christine; Greiner, Matthias; Lahrssen-Wiederholt, Monika

2017-01-01

Non-lead hunting ammunition is an alternative to bullets that contain lead. The use of lead ammunition can result in severe contamination of game meat, thus posing a health risk to consumers. With any kind of ammunition for hunting, the terminal effectiveness of bullets is an animal welfare issue. Doubts about the effectiveness of non-lead bullets for a humane kill of game animals in hunting have been discussed. The length of the escape distance after the shot has been used previously as an indicator for bullet performance. The object of this study was to determine how the bullet material (lead or non-lead) influences the observed escape distances. 1,234 records of the shooting of roe deer (Capreolus capreolus) and 825 records of the shooting of wild boar (Sus scrofa) were evaluated. As the bullet material cannot be regarded as the sole cause of variability of escape distances, interactions of other potential influencing variables like shot placement, shooting distance, were analyzed using conditional regression trees and two-part hurdle models. The length of the escape distance is not influenced by the use of lead or non-lead ammunition with either roe deer or wild boar. With roe deer, the length of the escape distance is influenced significantly by the shot placement and the type of hunting. Increasing shooting distances increased the length of the escape distance. With wild boar, shot placement and the age of the animals were found to be a significant influencing factor on the length of the escape distance. The length of the escape distance can be used as an indicator for adequate bullet effectiveness for humane killings of game animals in hunting.Non-lead bullets already exist which have an equally reliable killing effect as lead bullets.

Processing Time and Cognitive Effort of Longhand Note Taking When Reading and Summarizing a Structured or Linear Text

ERIC Educational Resources Information Center

Olive, Thierry; Barbier, Marie-Laure

2017-01-01

We examined longhand note taking strategies when reading and summarizing a source text that was formatted with bullets or that was presented in a single paragraph. We analyzed cognitive effort when reading the source text, when jotting notes, when reading the notes, and when composing the summary, as well as time spent in these activities and the…

The Silver Bullet Syndrome.

ERIC Educational Resources Information Center

Dehne, George C.

1995-01-01

Many colleges address complex problems with a single "silver bullet" strategy. Because value shifts according to the consumer's situation or goal, private colleges should become more aware of their "situational value" and exploit it. This requires an understanding of how students choose colleges. In contrast, popular silver bullets target…

Lead arthritis and lead poisoning following bullet wounds: a clinicopathologic, ultrastructural, and microanalytic study of two cases.

PubMed

Slavin, R E; Swedo, J; Cartwright, J; Viegas, S; Custer, E M

1988-02-01

Bullet wounds causing lead synovitis in the wrist and knee are reported in two patients, one of whom also developed clinical plumbism. Very high lead levels in the synovial fluid are believed to be responsible for toxicity changes that occurred in the synovium and bone. Ultrastructurally, these alterations included the formation of nuclear lead inclusions, dilation, and degranulation of the rough endoplasmic reticulum and deposition of crystalline precipitates in the matrix of the mitochondria in macrophages, osteoclasts, and synoviocytes, as well as the development of cytoplasmic lead inclusions in osteoclasts. Energy-dispersive x-ray elemental analysis (EDXEA) indicated that the nuclear inclusions contained only lead, whereas precipitates within the mitochondria and elsewhere in the cytoplasm were composed of complexes containing lead, calcium, and phosphorus. Similarly constituted extracellular complexes were incorporated into newly formed trabecular bone laid down as a physiologic response to the bullet lodged within the wrist bones. This bone subsequently exhibited defects in bone resorption, which were characterized by depressed osteoclastic function and a unique lesion termed incomplete osteocytic osteolysis. The genesis of this latter lesion is uncertain. The sequestration of the partially degraded bone fragments containing lead complexes into the marrow and eventually into the joint spaces and synovium permitted the recycling of bone lead, and this may have played an important role in inducing clinical plumbism in one of the patients in this study.

Laser-scanning techniques for rapid ballistics identification

NASA Technical Reports Server (NTRS)

Woodburgy, R. C.; Nakich, R. B.

1974-01-01

Two different laser-scanning methods may be utilized. In each case scanned cylindrical bullet surface is displayed ""unwrapped'' on oscilloscope screen. Bullets are compared by photographing each display and superimposing negatives of two images. With some modifications bullets can be scanned and compared by superimposing images on screen of dual-beam oscilloscope.

Firearms, bullets, and wound ballistics: an imaging primer.

PubMed

Hanna, Tarek N; Shuaib, Waqas; Han, Tatiana; Mehta, Ajeet; Khosa, Faisal

2015-07-01

Based on its intrinsic mass and velocity, a bullet has an upper limit of wounding potential. Actual wound severity is a function of the bullet construction and trajectory, as well as the properties of the tissues traversed. Interpreting physicians must evaluate the bullet trajectory and describe patterns of injury resulting from the effect of energy transfer from the projectile into living tissue. A basic understanding of firearms, projectiles, and wound ballistics can help the interpreting physicians in conceptualizing these injuries and interpreting these cases. Copyright © 2015 Elsevier Ltd. All rights reserved.

Lead isotope ratios for bullets, a descriptive approach for investigative purposes and a new method for sampling of bullet lead.

PubMed

Sjåstad, Knut-Endre; Simonsen, Siri Lene; Andersen, Tom H

2014-11-01

To establish a link between a bullet fired from a suspected firearm, investigation of striation marks are one of the corner stones in the forensic laboratory. Nevertheless, on some occasions, the bullet may be deformed to such extent that traditional investigation of striation marks will be impossible. Fragments of lead can be investigated by lead isotope ratio determination in order to distinguish between bullets with different origin. This approach initially seems reasonable, since the abundance of lead isotopes varies significantly in nature. To make a method valid for forensic purposes, it is important to have a fundamental understanding of the variation within a box of lead bullets and the expected variation between boxes. Studies of variability within and between boxes of ammunition are imperative to perform any type of forensic interpretation, both in an investigative and evaluative context. This work presents an extensive study of variability within and between boxes of ammunition by use of multicollector inductive coupled mass spectrometry. As a first approximation to classify bullets to any given source, a simple and robust graphical method is presented. In addition, an easy-to-use sampling procedure of lead is presented. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Terminal ballistics of the 9mm with Action Safety bullet or Blitz-Action-Trauma (BAT) ammunition.

PubMed

Lantz, P E; Stone, R S; Broudy, D; Morgan, T M

1994-05-01

Specialty ammunition creating atypical gunshot wounds of entrance can create confusion and may be misinterpreted by pathologists unfamiliar with the terminal ballistics of these projectiles. The previously unreported wound ballistics caused by the 9mm with Action Safety bullet described in a homicide highlights the atypical entrance wound(s) and wounding capacity of this novel ammunition. Manufactured by Geco division of Dynamit Nobel, the bullet consists of a nonjacketed solid copper alloy bullet body without a conventional lead core. The large deformation well and part of the smaller central channel is filled with a hard plastic core and post that creates a round nose bullet. The internal ballistics and unique design allow the plastic nose cap and post to separate from the copper alloy base while still in the barrel. The radiolucent nose cap leaves the bullet's path but can still penetrate tissue giving the appearance of a separate but smaller entrance wound. The sharp leading edge of the deformation well and relative high velocity of the bullet body creates a punched out entrance wound with minimal marginal abrasion. When the plastic nose cap or fragments of the plastic post impact the subject, test firings may allow an inference to the muzzle-target distance even in the absence of soot deposition or stippling.

Bullet trajectory reconstruction - Methods, accuracy and precision.

PubMed

Mattijssen, Erwin J A T; Kerkhoff, Wim

2016-05-01

Based on the spatial relation between a primary and secondary bullet defect or on the shape and dimensions of the primary bullet defect, a bullet's trajectory prior to impact can be estimated for a shooting scene reconstruction. The accuracy and precision of the estimated trajectories will vary depending on variables such as, the applied method of reconstruction, the (true) angle of incidence, the properties of the target material and the properties of the bullet upon impact. This study focused on the accuracy and precision of estimated bullet trajectories when different variants of the probing method, ellipse method, and lead-in method are applied on bullet defects resulting from shots at various angles of incidence on drywall, MDF and sheet metal. The results show that in most situations the best performance (accuracy and precision) is seen when the probing method is applied. Only for the lowest angles of incidence the performance was better when either the ellipse or lead-in method was applied. The data provided in this paper can be used to select the appropriate method(s) for reconstruction and to correct for systematic errors (accuracy) and to provide a value of the precision, by means of a confidence interval of the specific measurement. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Call for Papers: Cavity QED

NASA Astrophysics Data System (ADS)

Lange, W.; Gerard, J.-M.

2003-06-01

Cavity QED interactions of light and matter have been investigated in a wide range of systems covering the spectrum from microwaves to optical frequencies, using media as diverse as single atoms and semiconductors. Impressive progress has been achieved technologically as well as conceptually. This topical issue of Journal of Optics B: Quantum and Semiclassical Optics is intended to provide a comprehensive account of the current state of the art of cavity QED by uniting contributions from researchers active across this field. As Guest Editors of this topical issue, we invite manuscripts on current theoretical and experimental work on any aspects of cavity QED. The topics to be covered will include, but are not limited to: bulletCavity QED in optical microcavities bulletSemiconductor cavity QED bulletQuantum dot cavity QED bulletRydberg atoms in microwave cavities bulletPhotonic crystal cavity QED bulletMicrosphere resonators bulletMicrolasers and micromasers bulletMicrodroplets bulletDielectric cavity QED bulletCavity QED-based quantum information processing bulletQuantum state engineering in cavities The DEADLINE for submission of contributions is 31 July 2003 to allow the topical issue to appear in about February 2004. All papers will be peer-reviewed in accordance with the normal refereeing procedures and standards of Journal of Optics B: Quantum and Semiclassical Optics. Advice on publishing your work in the journal may be found at www.iop.org/journals/authors/jopb. Submissions should ideally be in either standard LaTeX form or Microsoft Word. There are no page charges for publication. In addition to the usual 50 free reprints, the corresponding author of each paper published will receive a complimentary copy of the topical issue. Contributions to the topical issue should if possible be submitted electronically at www.iop.org/journals/jopb. or by e-mail to jopb@iop.org. Authors unable to submit online or by e-mail may send hard copy contributions (enclosing the electronic code) to: Dr Claire Bedrock (Publisher), Journal of Optics B: Quantum and Semiclassical Optics, Institute of Physics Publishing, Dirac House, Temple Back, Bristol BS1 6BE, UK. All contributions should be accompanied by a readme file or covering letter, quoting `JOPB topical issue - Cavity QED', giving the postal and e-mail addresses for correspondence. Any subsequent change of address should be notified to the publishing office. We look forward to receiving your contribution to this topical issue.

CALL FOR PAPERS: Special Issue on `Singular Interactions in Quantum Mechanics: Solvable Models'

NASA Astrophysics Data System (ADS)

Dell'Antonio, G.; Exner, P.; Geyler, V.

2004-07-01

This is a call for contributions to a special issue of Journal of Physics A: Mathematical and General entitled `Singular Interactions in Quantum Mechanics: Solvable Models'. This issue should be a repository for high quality original work. We are interested in having the topic interpreted broadly, that is, to include contributions dealing with point-interaction models, one- and many-body, quantum graphs, including graph-like structures coupling different dimensions, interactions supported by curves, manifolds, and more complicated sets, random and nonlinear couplings, etc., as well as approximations helping us to understand the meaning of singular couplings and applications of such models on different parts of quantum mechanics. We believe that when the second printing of the `bible' of the field, the book Solvable Models in Quantum Mechanics by S Albeverio, F Gesztesy, the late R Høegh-Krohn and H Holden, appears it is the right moment to review new developments in this area, with the hope of stimulating further development of these extremely useful techniques. The Editorial Board has invited G Dell'Antonio, P Exner and V Geyler to serve as Guest Editors for the special issue. Their criteria for acceptance of contributions are as follows: bullet The subject of the paper should relate to singular interactions in quantum mechanics in the sense described above. bullet Contributions will be refereed and processed according to the usual procedure of the journal. bullet Papers should be original; reviews of a work published elsewhere will not be accepted. The guidelines for the preparation of contributions are as follows: bullet The DEADLINE for submission of contributions is 31 October 2004. This deadline will allow the special issue to appear in about April 2005. bullet There is a nominal page limit of 15 printed pages (approximately 9000 words) per contribution. Papers exceeding these limits may be accepted at the discretion of the Guest Editors. Further advice on publishing your work in Journal of Physics A: Mathematical and General may be found at www.iop.org/Journals/jphysa. bullet Contributions to the Special Issue should if possible be submitted electronically by web upload at {www.iop.org/Journals/jphysa or by e-mail to jphysa@iop.org, quoting `JPhysA Special Issue-Quantum Mechanics: Solvable Models'. Submissions should ideally be in standard LaTeX form; we are, however, able to accept most formats including Microsoft Word. Please see the web site for further information on electronic submissions. bullet Authors unable to submit electronically may send hard copy contributions to: Publishing Administrators, Journal of Physics A, Institute of Physics Publishing, Dirac House, Temple Back, Bristol BS1 6BE, UK, enclosing the electronic code on floppy disk if available and quoting `JPhysA Special Issue-Quantum Mechanics: Solvable Models'. bullet All contributions should be accompanied by a read-me file or covering letter giving the postal and e-mail addresses for correspondence. The Publishing Office should be notified of any subsequent change of address. This special issue will be published in the paper and online version of the journal. The corresponding author of each contribution will receive a complimentary copy of the issue. G Dell'Antonio, P Exner and V Geyler Guest Editors

Designing the ideal model for assessment of wound contamination after gunshot injuries: a comparative experimental study

PubMed Central

2012-01-01

Background Modern high-velocity projectiles produce temporary cavities and can thus cause extensive tissue destruction along the bullet path. It is still unclear whether gelatin blocks, which are used as a well-accepted tissue simulant, allow the effects of projectiles to be adequately investigated and how these effects are influenced by caliber size. Method Barium titanate particles were distributed throughout a test chamber for an assessment of wound contamination. We fired .22-caliber Magnum bullets first into gelatin blocks and then into porcine hind limbs placed behind the chamber. Two other types of bullets (.222-caliber bullets and 6.5 × 57 mm cartridges) were then shot into porcine hind limbs. Permanent and temporary wound cavities as well as the spatial distribution of barium titanate particles in relation to the bullet path were evaluated radiologically. Results A comparison of the gelatin blocks and hind limbs showed significant differences (p < 0.05) in the mean results for all parameters. There were significant differences between the bullets of different calibers in the depth to which barium titanate particles penetrated the porcine hind limbs. Almost no particles, however, were found at a penetration depth of 10 cm or more. By contrast, gas cavities were detected along the entire bullet path. Conclusion Gelatin is only of limited value for evaluating the path of high-velocity projectiles and the contamination of wounds by exogenous particles. There is a direct relationship between the presence of gas cavities in the tissue along the bullet path and caliber size. These cavities, however, are only mildly contaminated by exogenous particles. PMID:22490236

The Math Emporium: Higher Education's Silver Bullet

ERIC Educational Resources Information Center

Twigg, Carol A.

2011-01-01

Throughout the 1990's, many people saw information technology as a silver bullet that could solve many of higher education's problems, among them the need to improve learning outcomes and control the ever-upward trajectory of higher education costs. The term "silver bullet" connotes a direct and effortless solution to a problem.…

Energized Learning

Science.gov Websites

Energized Learning Students Lessons Bullet Getting Started Bullet Bringing It Home Bullet Unit activities with keys to subject matter standards. As students work through one or more of the standards-based Why Use the Energized Learning Site? How will teachers and Students Use the Energized Learning Site

Firearm suppressor having enhanced thermal management for rapid heat dissipation

DOEpatents

Moss, William C.; Anderson, Andrew T.

2014-08-19

A suppressor is disclosed for use with a weapon having a barrel through which a bullet is fired. The suppressor has an inner portion having a bore extending coaxially therethrough. The inner portion is adapted to be secured to a distal end of the barrel. A plurality of axial flow segments project radially from the inner portion and form axial flow paths through which expanding propellant gasses discharged from the barrel flow through. The axial flow segments have radially extending wall portions that define sections which may be filled with thermally conductive material, which in one example is a thermally conductive foam. The conductive foam helps to dissipate heat deposited within the suppressor during firing of the weapon.

Hunting of roe deer and wild boar in Germany: Is non-lead ammunition suitable for hunting?

PubMed Central

Gremse, Carl; Selhorst, Thomas; Bandick, Niels; Müller-Graf, Christine; Greiner, Matthias; Lahrssen-Wiederholt, Monika

2017-01-01

Background Non-lead hunting ammunition is an alternative to bullets that contain lead. The use of lead ammunition can result in severe contamination of game meat, thus posing a health risk to consumers. With any kind of ammunition for hunting, the terminal effectiveness of bullets is an animal welfare issue. Doubts about the effectiveness of non-lead bullets for a humane kill of game animals in hunting have been discussed. The length of the escape distance after the shot has been used previously as an indicator for bullet performance. Objective The object of this study was to determine how the bullet material (lead or non-lead) influences the observed escape distances. Methods 1,234 records of the shooting of roe deer (Capreolus capreolus) and 825 records of the shooting of wild boar (Sus scrofa) were evaluated. As the bullet material cannot be regarded as the sole cause of variability of escape distances, interactions of other potential influencing variables like shot placement, shooting distance, were analyzed using conditional regression trees and two-part hurdle models. Results The length of the escape distance is not influenced by the use of lead or non-lead ammunition with either roe deer or wild boar. With roe deer, the length of the escape distance is influenced significantly by the shot placement and the type of hunting. Increasing shooting distances increased the length of the escape distance. With wild boar, shot placement and the age of the animals were found to be a significant influencing factor on the length of the escape distance. Conclusions The length of the escape distance can be used as an indicator for adequate bullet effectiveness for humane killings of game animals in hunting.Non-lead bullets already exist which have an equally reliable killing effect as lead bullets. PMID:28926620

Fatal contact shot to the chest caused by the gas jet from a muzzle-loading pistol discharging only black powder and no bullet: case study and experimental simulation of the wounding effect.

PubMed

Große Perdekamp, Markus; Glardon, Matthieu; Kneubuehl, Beat P; Bielefeld, Lena; Nadjem, Hadi; Pollak, Stefan; Pircher, Rebecca

2015-01-01

In modern medico-legal literature, only a small number of publications deal with fatal injuries from black powder guns. Most of them focus on the morphological features such as intense soot soiling, blast tattooing and burn effects in close-range shots or describe the wound ballistics of spherical lead bullets. Another kind of "unusual" and potentially lethal weapons are handguns destined for firing only blank cartridges such as starter and alarm pistols. The dangerousness of these guns is restricted to very close and contact range shots and results from the gas jet produced by the deflagration of the propellant. The present paper reports on a suicide committed with a muzzle-loading percussion pistol cal. 45. An unusually large stellate entrance wound was located in the precordial region, accompanied by an imprint mark from the ramrod and a faint greenish discoloration (apparently due to the formation of sulfhemoglobin). Autopsy revealed an oversized powder cavity, multiple fractures of the anterior thoracic wall as well as ruptures of the heart, the aorta, the left hepatic lobe and the diaphragm. In total, the zone of mechanical destruction had a diameter of approx. 15 cm. As there was no exit wound and no bullet lodged in the body, the injury was caused exclusively by the inrushing combustion gases of the propellant (black powder) comparable with the gas jet of a blank cartridge gun. In contact shots to ballistic gelatine using the suicide's pistol loaded with black powder but no projectile, the formation of a nearly spherical cavity could be demonstrated by means of a high-speed camera. The extent of the temporary cavity after firing with 5 g of black powder roughly corresponded to the zone of destruction found in the suicide's body.

Magnetic Field Interactions of Military and Law Enforcement Bullets at 1.5 and 3 Tesla.

PubMed

Diallo, Idris; Auffret, Mathieu; Attar, Lakdar; Bouvard, Elise; Rousset, Jean; Ben Salem, Douraied

2016-07-01

There are significant numbers of military and law enforcement bullets containing ferromagnetic materials. This study aimed to assess the magnetic field interactions for a representative sample of military and law enforcement ballistic objects at 1.5 and 3 tesla (T) to create a magnetic resonance imaging (MRI) compatibility database. Twenty-nine different bullets underwent MRI evaluation. The deflection angle method and a qualitative torque scale were used. The samples were representative of those commonly used in the North Atlantic Treaty Organization (NATO) military forces (e.g., 5.56 mm NATO), law enforcement agencies (e.g., 9 mm Parabellum), and encountered in war injuries and crime-related trauma (e.g., 7.62 mm Kalashnikov). At all static magnetic field strengths, all non-nickel- and nonsteel-containing bullets exhibited no movement (deflection angle = 0°; torque = 0), whereas eight bullets containing steel core, steel jacket, or nickel jacket exhibited substantial magnetic field interactions over and above what might be regarded as safe in vivo (deflection angle = 90°; torque = 4+). Military and law enforcement non-nickel- or nonsteel-containing bullets appear to be safe for patients in MRI system at 1.5 and 3 T. On the other hand, nickel- and steel-containing bullets exhibit movements that are considered potentially unsafe for patients in an MRI environment. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

A Bullet Fired in Dry Water: An Investigative Activity to Learn Hydrodynamics Concepts

ERIC Educational Resources Information Center

Leitão, Ulisses Azevedo; dos Anjos Pinheiro da Silva, Antonio; Trindade do Nascimento, Natália Cristina; da Cruz Gervásio, Lilian Mara Benedita

2017-01-01

In this paper we report an investigative activity on hydrodynamics, in the context of an inquiry-based learning project. The aim is to analyse the experiment of a bullet shot underwater. Using "Tracker," a video analysing and modelling software, the displacement of the bullet was measured as function of time, processing a slow motion…

Large Spin-Wave Bullet in a Ferrimagnetic Insulator Driven by the Spin Hall Effect

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jungfleisch, M. B.; Zhang, W.; Sklenar, J.

2016-02-01

Due to its transverse nature, spin Hall effects (SHE) provide the possibility to excite and detect spin currents and magnetization dynamics even in magnetic insulators. Magnetic insulators are outstanding materials for the investigation of nonlinear phenomena and for novel low power spintronics applications because of their extremely low Gilbert damping. Here, we report on the direct imaging of electrically driven spin-torque ferromagnetic resonance (ST-FMR) in the ferrimagnetic insulator Y 3Fe 5O 12 based on the excitation and detection by SHEs. The driven spin dynamics in Y 3Fe 5O 12 is directly imaged by spatially-resolved microfocused Brillouin light scattering (BLS) spectroscopy.more » Previously, ST-FMR experiments assumed a uniform precession across the sample, which is not valid in our measurements. A strong spin-wave localization in the center of the sample is observed indicating the formation of a nonlinear, self-localized spin-wave `bullet'.« less

The rise and fall of a challenger: the Bullet Cluster in Λ cold dark matter simulations

NASA Astrophysics Data System (ADS)

Thompson, Robert; Davé, Romeel; Nagamine, Kentaro

2015-09-01

The Bullet Cluster has provided some of the best evidence for the Λ cold dark matter (ΛCDM) model via direct empirical proof of the existence of collisionless dark matter, while posing a serious challenge owing to the unusually high inferred pairwise velocities of its progenitor clusters. Here, we investigate the probability of finding such a high-velocity pair in large-volume N-body simulations, particularly focusing on differences between halo-finding algorithms. We find that algorithms that do not account for the kinematics of infalling groups yield vastly different statistics and probabilities. When employing the ROCKSTAR halo finder that considers particle velocities, we find numerous Bullet-like pair candidates that closely match not only the high pairwise velocity, but also the mass, mass ratio, separation distance, and collision angle of the initial conditions that have been shown to produce the Bullet Cluster in non-cosmological hydrodynamic simulations. The probability of finding a high pairwise velocity pair among haloes with Mhalo ≥ 1014 M⊙ is 4.6 × 10-4 using ROCKSTAR, while it is ≈34 × lower using a friends-of-friends (FoF)-based approach as in previous studies. This is because the typical spatial extent of Bullet progenitors is such that FoF tends to group them into a single halo despite clearly distinct kinematics. Further requiring an appropriately high average mass among the two progenitors, we find the comoving number density of potential Bullet-like candidates to be of the order of ≈10-10 Mpc-3. Our findings suggest that ΛCDM straightforwardly produces massive, high relative velocity halo pairs analogous to Bullet Cluster progenitors, and hence the Bullet Cluster does not present a challenge to the ΛCDM model.

Management of migrating intracranial bullets: lessons learned from surviving an AK-47 bullet through the lateral brainstem.

PubMed

Rammo, Richard A; DeFazio, Michael V; Bullock, M Ross

2012-01-01

Survival after a gunshot wound (GSW) to the head is becoming more common, with an accompanying increase in spontaneous migration of these intracranial bullet fragments. This phenomenon is well described in current literature and is a potentially life-threatening delayed complication of GSW to the head. We present the case of a 17-year-old boy who survived a penetrating GSW to the cranium and cerebellum after an accident involving an AK (Automatic Kalashnikov)-47 (7.62 mm). Following initial attempts to remove the bullet and associated hematoma from the cerebellar hemisphere, intraoperative fluoroscopy revealed that the bullet had migrated to lie within the right middle cerebellar peduncle with the development of intraoperative cardiac arrhythmia. The bullet could not be retrieved without risk of damage to the superior and inferior cerebellar arteries. The patient then developed bacterial meningitis, and further imaging revealed the bullet had again migrated under the cerebellar cortex to an accessible location. The infection was treated with aggressive antibiotic therapy and the bullet was removed from the posterior fossa, thus preventing recurrence of infection and further migration. The patient regained full motor, speech, and proprioceptive function within months after injury. The potential for spontaneous migration exists with any penetrating brain injury involving a retained foreign body. When a retained intracranial foreign body is unable to be safely extracted during initial debridement, close clinical evaluation is essential and plain-film or computed tomographic imaging should be considered in order to enhance the early detection of delayed-onset life-threatening deterioration, such as meningitis and occlusion of cerebrospinal fluid drainage, because of spontaneous migration. Copyright © 2012 Elsevier Inc. All rights reserved.

Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nguyen Minh

2002-03-31

This report summarizes the work performed by Honeywell during the January 2002 to March 2002 reporting period under Cooperative Agreement DE-FC26-01NT40779 for the U. S. Department of Energy, National Energy Technology Laboratory (DOE/NETL) entitled ''Solid Oxide Fuel Cell Hybrid System for Distributed Power Generation''. The main objective of this project is to develop and demonstrate the feasibility of a highly efficient hybrid system integrating a planar Solid Oxide Fuel Cell (SOFC) and a turbogenerator. For this reporting period the following activities have been carried out: {lg_bullet} Conceptual system design trade studies were performed {lg_bullet} System-level performance model was created {lg_bullet}more » Dynamic control models are being developed {lg_bullet} Mechanical properties of candidate heat exchanger materials were investigated {lg_bullet} SOFC performance mapping as a function of flow rate and pressure was completed« less

A Fortunate Story of an Unusual AK-47 Bullet Trajectory: Always Keep a Smartphone in Your Pocket.

PubMed

Thabouillot, Oscar; Perrier, Pierre; Roche, Nicolas-Charles; Agard, David; Barbier, Olivier; Martin, Guillaume; Viant, Eric; Leclere, Jean-Baptiste

2016-06-01

This is a report of a fortunate story of an unusual AK-47 bullet trajectory which took place during the Paris (France) attack of November 13th, 2015. A young man, trying to protect his girlfriend, interfered between her and a shooter. He had been wounded in the posterior compartment of the thigh. The bullet penetrated him and, instead of exiting, rebound against his Smartphone, which was in the front pocket of his pants. Thanks to that, the missile bullet did not injure his girlfriend but ended its trajectory in the fat tissue of his thigh. Thabouillot O , Perrier P , Roche NC , Agard D , Barbier O , Martin G , Viant E , Leclere JB . A fortunate story of an unusual AK-47 bullet trajectory: always keep a Smartphone in your pocket. Prehosp Disaster Med, 2016;31(3):343-345.

Endoscopic Removal of a Bullet That Migrated to the Third Ventricle Causing Hydrocephalus.

PubMed

Aydoseli, Aydın; Unal, Tugrul Cem; Aras, Yavuz; Sabanci, Pulat Akın; Altunrende, Emre; Izgi, Nail

2017-09-01

Hydrocephalus caused by an intraventricular bullet is a rare event. We report a case of endoscopic removal of an intraventricular bullet. A 66-year-old man was admitted with a gunshot wound to the head after a suicide attempt. The bullet migrated from the frontal parenchyma to the third ventricle day 4 of admission. On day 21 of admission, the patient developed hydrocephalus with obstruction of the cerebral aqueduct. The bullet was accessed through an endoscopic third ventriculostomy and removed using an endoscope. Hydrocephalus may develop in patients with intraventricular foreign objects. When such objects must be removed, the endoscopic approach is a safe, efficient, and minimally invasive procedure. To our knowledge, this is the first case in the literature of foreign object removal from the ventricle via a transcortical endoscopic approach. Copyright © 2017 Elsevier Inc. All rights reserved.

Ballistic fractures: indirect fracture to bone.

PubMed

Dougherty, Paul J; Sherman, Don; Dau, Nathan; Bir, Cynthia

2011-11-01

Two mechanisms of injury, the temporary cavity and the sonic wave, have been proposed to produce indirect fractures as a projectile passes nearby in tissue. The purpose of this study is to evaluate the temporal relationship of pressure waves using strain gauge technology and high-speed video to elucidate whether the sonic wave, the temporary cavity, or both are responsible for the formation of indirect fractures. Twenty-eight fresh frozen cadaveric diaphyseal tibia (2) and femurs (26) were implanted into ordnance gelatin blocks. Shots were fired using 9- and 5.56-mm bullets traversing through the gelatin only, passing close to the edge of the bone, but not touching, to produce an indirect fracture. High-speed video of the impact event was collected at 20,000 frames/s. Acquisition of the strain data were synchronized with the video at 20,000 Hz. The exact time of fracture was determined by analyzing and comparing the strain gauge output and video. Twenty-eight shots were fired, 2 with 9-mm bullets and 26 with 5.56-mm bullets. Eight indirect fractures that occurred were of a simple (oblique or wedge) pattern. Comparison of the average distance of the projectile from the bone was 9.68 mm (range, 3-20 mm) for fractured specimens and 15.15 mm (range, 7-28 mm) for nonfractured specimens (Student's t test, p = 0.036). In this study, indirect fractures were produced after passage of the projectile. Thus, the temporary cavity, not the sonic wave, was responsible for the indirect fractures.

A Bullet-Block Experiment That Explains the Chain Fountain

ERIC Educational Resources Information Center

Pantaleone, J.; Smith, R.

2018-01-01

It is common in science for two phenomena to appear to be very different, but in fact follow from the same basic principles. Here we consider such a case, the connection between the chain fountain and a bullet-block collision experiment. When an upward moving bullet strikes a wooden block resting on a horizontal table, the block will rise to a…

75 FR 70246 - Lead Fishing Sinkers; Disposition of TSCA Section 21 Petition

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... distribution in commerce of (1) lead bullets and shot; and (2) lead fishing sinkers. On August 27, 2010, EPA denied the first request due to a lack of authority to regulate lead in bullets and shot under TSCA. EPA... commerce of (1) lead bullets and shot; and (2) lead fishing gear. With respect to fishing gear, petitioners...

Alternative Fuels Data Center: Diversity of Fuels Supports Sustainability

Science.gov Websites

Supports Sustainability in Fort Collins " We don't believe there is going to be one silver bullet to understanding that there is no "silver bullet" that will work in every case. Modeling Leadership in . energy independence. "We don't believe there is going to be one silver bullet to help us become more

Short report of an unusual ballistic trauma

PubMed Central

Inchingolo, Francesco; Tatullo, Marco; Marrelli, Massimo; Inchingolo, Alessio D.; Pinto, Giorgia; Inchingolo, Angelo M.; Dipalma, Gianna

2011-01-01

INTRODUCTION Portable firearms have a relevant medico-legal interest, being a major cause of injury. Bullet entry wounds generally have a particular appearance, including contusion, skin introflection, and simple or excoriated ecchymosis. The skin wound is typically a hole with frayed margins, whose diameter is smaller than that of the bullet. PRESENTATION OF CASE We report the case of a 19-year-old man with ballistic trauma. Examination of the patient's lesions indicated that the bullet had entered from the left mandibular parasymphysis, creating a small hole without the typical bullet wipe and blackening. Subsequently, the bullet seemed to have fractured the left chin region immediately below the lower alveolar process, and it finally stopped in the submandibular area in the suprahyoid region of the neck. DISCUSSION This case is peculiar because the distinctive features of a firearm injury were absent; the lack of bleeding and edema made the case difficult to interpret without additional diagnostic investigations. CONCLUSION Ballistic trauma can manifest in different ways; therefore, internal trauma should be suspected even in the absence of clear external signs. This case report shows how an unusual bullet entry hole can mask quite serious injuries. PMID:22096751

China's bullet trains facilitate market integration and mitigate the cost of megacity growth.

PubMed

Zheng, Siqi; Kahn, Matthew E

2013-04-02

Megacity growth in the developing world is fueled by a desire to access their large local labor markets. Growing megacities suffer from high levels of traffic congestion and pollution, which degrade local quality of life. Transportation technology that allows individuals to access the megacity without living within its boundaries offers potentially large social benefits, because individuals can enjoy the benefits of urban agglomeration while not paying megacity real estate rents and suffering from the city's social costs. This paper presents evidence supporting the claim that China's bullet trains are playing this role. The bullet train is regarded as one of the most significant technological breakthroughs in passenger transportation developed in the second half of the 20th century. Starting in 2007, China has introduced several new bullet trains that connect megacities such as Beijing, Shanghai, and Guangzhou with nearby cities. Through facilitating market integration, bullet trains will stimulate the development of second- and third-tier cities. By offering households and firms a larger menu of location alternatives, bullet trains help to protect the quality of life of the growing urban population. We document that this transport innovation is associated with rising real estate prices in the nearby secondary cities.

Intracranial surgical operative apparatus

NASA Technical Reports Server (NTRS)

Sheldon, Charles H. (Inventor); Frazer, Robert E. (Inventor); Lutes, Harold R. (Inventor)

1983-01-01

Apparatus for operating on the brain with minimal disturbances thereto, including a bullet-shaped expandable device with an end that can be closed for insertion through a small hole in the brain. The device can be expanded after insertion to leave an air pocket through which to extend viewing and cutting devices which enable operation on tumors or the like that lie at the end of the expanded device. A set of probes of varying diameters are also provided, to progressively enlarge a passage leading to the tumor, prior to inserting the expandable device.

Endoscopic ultrasound-guided biliary drainage using a newly designed metal stent with a thin delivery system: a preclinical study in phantom and porcine models.

PubMed

Minaga, Kosuke; Kitano, Masayuki; Itonaga, Masahiro; Imai, Hajime; Miyata, Takeshi; Yamao, Kentaro; Tamura, Takashi; Nuta, Junya; Warigaya, Kenji; Kudo, Masatoshi

2017-12-08

This study was designed to evaluate the feasibility and safety of a newly designed self-expandable metal stent for endoscopic ultrasound-guided biliary drainage (EUS-BD) when it was delivered via three different stent delivery systems: a 7.5Fr delivery catheter with a bullet-shaped tip (7.5Fr-bullet), a 7Fr catheter with a bullet-shaped tip (7Fr-bullet), or a 7Fr catheter with a tee-shaped tip (7Fr-tee). This experimental study utilized a porcine model of biliary dilatation involving ten pigs. In the animal study, technical feasibility and clinical outcomes of the stent when placed with each of the delivery systems were examined. In addition, a phantom model was used to measure the resistance of these delivery systems to advancement. Phantom experiments showed that, compared with 7Fr-bullet, 7Fr-tee had less resistance force to the advancement of the stent delivery system. EUS-BD was technically successful in all ten pigs. Fistulous tract dilation was necessary in 100% (2/2), 75% (3/4), and 0% (0/4) of the pigs that underwent EUS-BD using 7.5Fr-bullet, 7Fr-bullet, and 7Fr-tee, respectively. There were no procedure-related complications. Our newly designed metal stent may be feasible and safe for EUS-BD, particularly when delivered by 7Fr-tee, because it eliminates the need for fistulous tract dilation.

MRI issues for ballistic objects: information obtained at 1.5-, 3- and 7-Tesla.

PubMed

Dedini, Russell D; Karacozoff, Alexandra M; Shellock, Frank G; Xu, Duan; McClellan, R Trigg; Pekmezci, Murat

2013-07-01

Few studies exist for magnetic resonance imaging (MRI) issues and ballistics, and there are no studies addressing movement, heating, and artifacts associated with ballistics at 3-tesla (T). Movement because of magnetic field interactions and radiofrequency (RF)-induced heating of retained bullets may injure nearby critical structures. Artifacts may also interfere with the diagnostic use of MRI. To investigate these potential hazards of MRI on a sample of bullets and shotgun pellets. Laboratory investigation, ex vivo. Thirty-two different bullets and seven different shotgun pellets, commonly encountered in criminal trauma, were assessed relative to 1.5-, 3-, and 7-T magnetic resonance systems. Magnetic field interactions, including translational attraction and torque, were measured. A representative sample of five bullets were then tested for magnetic field interactions, RF-induced heating, and the generation of artifacts at 3-T. At all static magnetic field strengths, non-steel-containing bullets and pellets exhibited no movement, whereas one steel core bullet and two steel pellets exhibited movement in excess of what might be considered safe for patients in MRI at 1.5-, 3- and 7-Tesla. At 3-T, the maximum temperature increase of five bullets tested was 1.7°C versus background heating of 1.5°C. Of five bullets tested for artifacts, those without a steel core exhibited small signal voids, whereas a single steel core bullet exhibited a very large signal void. Ballistics made of lead with copper or alloy jackets appear to be safe with respect to MRI-related movement at 1.5-, 3-, and 7-T static magnetic fields, whereas ballistics containing steel may pose a danger if near critical body structures because of strong magnetic field interactions. Temperature increases of selected ballistics during 3-T MRI was not clinically significant, even for the ferromagnetic projectiles. Finally, ballistics containing steel generated larger artifacts when compared with ballistics made of lead with copper and alloy jackets and may impair the diagnostic use of MRI. Copyright © 2013 Elsevier Inc. All rights reserved.

[A singular bullet run in a firearm wound in the neck. A case report].

PubMed

Martino, Antonio; De Rienzo, Dino; Evangelista, Marco; La Rocca, Francesco; Maharajan, Gautam; Martino, Giovanni; Sacco, Maria Lucia; Scaglione, Mariano

2009-01-01

The paper deals with the peculiarities of a firearm wound regarding the dynamic of the accident and particularly considering the path followed by the bullet. The patient's firearm wound is described on the basis of the instrumental examinations done. These last give us a precious help to confirm the thesis, already guessed on the clinical examination of an introduction and path followed through the digestive tract, and to show the dynamics and the still positions of the bullet inside the patient's body. The bullet was expelled spontaneously by defecation. After control of no internal damages this firearm wound has been treated simply as a normal tip wound.

A bullet fired in dry water: an investigative activity to learn hydrodynamics concepts

NASA Astrophysics Data System (ADS)

Azevedo Leitão, Ulisses; dos Anjos Pinheiro da Silva, Antonio; Trindade do Nascimento, Natália Cristina; Mara Benedita da Cruz Gervásio, Lilian

2017-01-01

In this paper we report an investigative activity on hydrodynamics, in the context of an inquiry-based learning project. The aim is to analyse the experiment of a bullet shot underwater. Using Tracker, a video analysing and modelling software, the displacement of the bullet was measured as function of time, processing a slow motion video from YouTube. It was found that the displacement of the bullet is well described in the first 20 ms by the inviscid flow regime, where the Newtonian drag force overcomes the viscous drag. This behaviour is discussed in the context of what Richard Feynman’s famous Lectures on Physics describes as ‘The Flow of Dry Water’.

Masked urinary bladder injury with a bullet expulsed spontaneously during voiding.

PubMed

Calışkan, Müjgan; Evren, Ismail; Kabak, Ismail; Atak, Ibrahim; Gökcan, Recai

2011-09-01

We report a case with gunshot to the pelvis. The injury site was the soft tissue between the rectum and urinary bladder. Several days later, the bullet was expulsed spontaneously during voiding. In the literature, only a few case reports have described spontaneous expulsion of an intravesical bullet. A 19-year-old male was wounded on the left hip by gunshot. Radiographic examinations showed a bullet in the pelvis, which was localized in the soft tissue between the rectum and urinary bladder, with no accompanying visceral injury on abdominopelvic computerized tomography. Macroscopic hematuria was noticed after urethral catheterization. Rectosigmoidoscopy and retrograde cystoscopic examinations were both negative. The patient was monitored closely and treated conservatively with no surgical intervention. The urinary catheter was removed on the fifth postoperative day, and the bullet was expulsed spontaneously via the urethra during normal voiding three hours after catheter removal. Thereafter, a retrograde urethrography was performed, which showed no evidence of urinary tract or bladder injury.

Proper assessment of the JFK assassination bullet lead evidence from metallurgical and statistical perspectives.

PubMed

Randich, Erik; Grant, Patrick M

2006-07-01

The bullet evidence in the JFK assassination investigation was reexamined from metallurgical and statistical standpoints. The questioned specimens are comprised of soft lead, possibly from full-metal-jacketed Mannlicher-Carcano (MC), 6.5-mm ammunition. During lead refining, contaminant elements are removed to specified levels for a desired alloy or composition. Microsegregation of trace and minor elements during lead casting and processing can account for the experimental variabilities measured in various evidentiary and comparison samples by laboratory analysts. Thus, elevated concentrations of antimony and copper at crystallographic grain boundaries, the widely varying sizes of grains in MC bullet lead, and the 5-60 mg bullet samples analyzed for assassination intelligence effectively resulted in operational sampling error for the analyses. This deficiency was not considered in the original data interpretation and resulted in an invalid conclusion in favor of the single-bullet theory of the assassination. Alternate statistical calculations, based on the historic analytical data, incorporating weighted averaging and propagation of experimental uncertainties also considerably weaken support for the single-bullet theory. In effect, this assessment of the material composition of the lead specimens from the assassination concludes that the extant evidence is consistent with any number between two and five rounds fired in Dealey Plaza during the shooting.

Proper Assessment of the JFK Assassination Bullet Lead Evidence from Metallurgical and Statistical Perspectives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Randich, E; Grant, P M

2006-08-29

The bullet evidence in the JFK assassination investigation was reexamined from metallurgical and statistical standpoints. The questioned specimens are comprised of soft lead, possibly from full-metal-jacketed Mannlicher-Carcano, 6.5-mm ammunition. During lead refining, contaminant elements are removed to specified levels for a desired alloy or composition. Microsegregation of trace and minor elements during lead casting and processing can account for the experimental variabilities measured in various evidentiary and comparison samples by laboratory analysts. Thus, elevated concentrations of antimony and copper at crystallographic grain boundaries, the widely varying sizes of grains in Mannlicher-Carcano bullet lead, and the 5-60 mg bullet samples analyzedmore » for assassination intelligence effectively resulted in operational sampling error for the analyses. This deficiency was not considered in the original data interpretation and resulted in an invalid conclusion in favor of the single-bullet theory of the assassination. Alternate statistical calculations, based on the historic analytical data, incorporating weighted averaging and propagation of experimental uncertainties also considerably weaken support for the single-bullet theory. In effect, this assessment of the material composition of the lead specimens from the assassination concludes that the extant evidence is consistent with any number between two and five rounds fired in Dealey Plaza during the shooting.« less

Bullet trajectory predicts the need for damage control: an artificial neural network model.

PubMed

Hirshberg, Asher; Wall, Matthew J; Mattox, Kenneth L

2002-05-01

Effective use of damage control in trauma hinges on an early decision to use it. Bullet trajectory has never been studied as a marker for damage control. We hypothesize that this decision can be predicted by an artificial neural network (ANN) model based on the bullet trajectory and the patient's blood pressure. A multilayer perceptron ANN predictive model was developed from a data set of 312 patients with single abdominal gunshot injuries. Input variables were the bullet path, trajectory patterns, and admission systolic pressure. The output variable was either a damage control laparotomy or intraoperative death. The best performing ANN was implemented on prospectively collected data from 34 patients. The model achieved a correct classification rate of 0.96 and area under the receiver operating characteristic curve of 0.94. External validation showed the model to have a sensitivity of 88% and specificity of 96%. Model implementation on the prospectively collected data had a correct classification rate of 0.91. Sensitivity analysis showed that systolic pressure, bullet path across the midline, and trajectory involving the right upper quadrant were the three most important input variables. Bullet trajectory is an important, hitherto unrecognized, factor that should be incorporated into the decision to use damage control.

Photonic Switching Devices Using Light Bullets

NASA Technical Reports Server (NTRS)

Goorjian, Peter M. (Inventor)

1997-01-01

The present invention is directed toward a unique ultra-fast, all-optical switching device or switch made with readily available, relatively inexpensive, highly nonlinear photonic glasses. These photonic glasses have a sufficiently negative group velocity dispersion and high nonlinear index of refraction to support stable light bullets. The light bullets counterpropagate through, and interact within the waveguide to selectively change each others' directions of propagation into predetermined channels. In one embodiment, the switch utilizes a rectangularly planar slab waveguide, and further includes two central channels and a plurality of lateral channels for guiding the light bullets into and out of the waveguide. One advantage presented by the present all-optical switching device lies in its practical use of light bullets, thus preventing the degeneration of the pulses due to dispersion and diffraction at the front and back of the pulses. Another feature of the switching device is the relative insensitivity of the collision process to the time difference in which the counter-propagating pulses enter the waveguide. since. contrary to conventional co-propagating spatial solitons, the relative phase of the colliding pulses does not affect the interaction of these pulses. Yet another feature of the present all-optical switching device is the selection of the light pulse parameters which enables the generation of light bullets in highly nonlinear glasses.

Fractures Due to Gunshot Wounds: Do Retained Bullet Fragments Affect Union?

PubMed

Riehl, John T; Connolly, Keith; Haidukewych, George; Koval, Ken

2015-01-01

Many types of projectiles, including modern hollow point bullets, fragment into smaller pieces upon impact, particularly when striking bone. This study was performed to examine the effect on time to union with retained bullet material near a fracture site in cases of gunshot injury. All gunshot injuries operatively treated with internal fixation at a Level 1 Trauma Center between March 2008 and August 2011 were retrospectively reviewed. Retained bullet load near the fracture site was calculated based on percentage of material retained compared to the cortical diameter of the involved bone. Analyses were performed to assess the effect of the lead-cortical ratio and amount of comminution on time to fracture union. Thirty-two patients (34 fractures) met the inclusion criteria, with an equal number of comminuted (17) and non-comminuted fractures (17). Seventeen of 34 fractures (50%) united within 4 months, 16/34 (47%) developed a delayed union, and 1/34 (3%) developed a nonunion requiring revision surgery. Sixteen of 17 fractures (94%) that united by 4 months had a cumulative amount of bullet fragmentation retained near the fracture site of less than 20% of the cortical diameter. Nine out of 10 fractures (90%) with retained fragments near the fracture site was equal to or exceeding 20% of the cortical diameter had delayed or nonunion. Fracture comminution had no effect on time to union. The quantity of retained bullet material near the fracture site was more predictive of the rate of fracture union than was comminution. Fractures with bullet fragmentation equal to or exceeding 20% of the cortical width demonstrated a significantly higher rate of delayed union/nonunion compared to those fractures with less retained bullet material, which may indicate a local cytotoxic effect from lead on bone healing. These findings may influence decisions on timing of secondary surgeries. Level III.

Fractures Due to Gunshot Wounds: Do Retained Bullet Fragments Affect Union?

PubMed Central

Riehl, John T.; Connolly, Keith; Haidukewych, George; Koval, Ken

2015-01-01

Background Many types of projectiles, including modern hollow point bullets, fragment into smaller pieces upon impact, particularly when striking bone. This study was performed to examine the effect on time to union with retained bullet material near a fracture site in cases of gunshot injury. Methods All gunshot injuries operatively treated with internal fixation at a Level 1 Trauma Center between March 2008 and August 2011 were retrospectively reviewed. Retained bullet load near the fracture site was calculated based on percentage of material retained compared to the cortical diameter of the involved bone. Analyses were performed to assess the effect of the lead-cortical ratio and amount of comminution on time to fracture union. Results Thirty-two patients (34 fractures) met the inclusion criteria, with an equal number of comminuted (17) and non-comminuted fractures (17). Seventeen of 34 fractures (50%) united within 4 months, 16/34 (47%) developed a delayed union, and 1/34 (3%) developed a nonunion requiring revision surgery. Sixteen of 17 fractures (94%) that united by 4 months had a cumulative amount of bullet fragmentation retained near the fracture site of less than 20% of the cortical diameter. Nine out of 10 fractures (90%) with retained fragments near the fracture site was equal to or exceeding 20% of the cortical diameter had delayed or nonunion. Fracture comminution had no effect on time to union. Conclusions The quantity of retained bullet material near the fracture site was more predictive of the rate of fracture union than was comminution. Fractures with bullet fragmentation equal to or exceeding 20% of the cortical width demonstrated a significantly higher rate of delayed union/nonunion compared to those fractures with less retained bullet material, which may indicate a local cytotoxic effect from lead on bone healing. These findings may influence decisions on timing of secondary surgeries. Level of Evidence Level III PMID:26361445

Genomic insights into the uncultured genus 'Candidatus Magnetobacterium' in the phylum Nitrospirae.

PubMed

Lin, Wei; Deng, Aihua; Wang, Zhang; Li, Ying; Wen, Tingyi; Wu, Long-Fei; Wu, Martin; Pan, Yongxin

2014-12-01

Magnetotactic bacteria (MTB) of the genus 'Candidatus Magnetobacterium' in phylum Nitrospirae are of great interest because of the formation of hundreds of bullet-shaped magnetite magnetosomes in multiple bundles of chains per cell. These bacteria are worldwide distributed in aquatic environments and have important roles in the biogeochemical cycles of iron and sulfur. However, except for a few short genomic fragments, no genome data are available for this ecologically important genus, and little is known about their metabolic capacity owing to the lack of pure cultures. Here we report the first draft genome sequence of 3.42 Mb from an uncultivated strain tentatively named 'Ca. Magnetobacterium casensis' isolated from Lake Miyun, China. The genome sequence indicates an autotrophic lifestyle using the Wood-Ljungdahl pathway for CO2 fixation, which has not been described in any previously known MTB or Nitrospirae organisms. Pathways involved in the denitrification, sulfur oxidation and sulfate reduction have been predicted, indicating its considerable capacity for adaptation to variable geochemical conditions and roles in local biogeochemical cycles. Moreover, we have identified a complete magnetosome gene island containing mam, mad and a set of novel genes (named as man genes) putatively responsible for the formation of bullet-shaped magnetite magnetosomes and the arrangement of multiple magnetosome chains. This first comprehensive genomic analysis sheds light on the physiology, ecology and biomineralization of the poorly understood 'Ca. Magnetobacterium' genus.

Destabilization and intracranial fragmentation of a full metal jacket bullet.

PubMed

Farrugia, A; Raul, J S; Geraut, A; Tortel, M C; Ludes, B

2009-10-01

We report a case with an atypical entrance wound as a result of a destabilized full metal jacket bullet penetration. The destabilized bullet by an impact with the dorsal hand experiences a yawing to tumbling motion in flight. The large angle of yaw induces a larger presenting profile upon impact that contributes, associated to a rapid deceleration, to a greater mechanical force on the projectile structure and a fragmentation into core and jacket. Forensic pathologists have to be aware that the metal jacket bullet could tend to break up outside or inside the body particularly after a shooting through a target. This phenomenon induces atypical entrance wounds and atypical X-ray presentation. 2009 Elsevier Ltd and Faculty of Forensic and Legal Medicine.

Self-accelerating Airy-Ince-Gaussian and Airy-Helical-Ince-Gaussian light bullets in free space.

PubMed

Peng, Yulian; Chen, Bo; Peng, Xi; Zhou, Meiling; Zhang, Liping; Li, Dongdong; Deng, Dongmei

2016-08-22

The evolution of the three-dimensional (3D) self-accelerating Airy-Ince-Gaussian (AiIG) and Airy-Helical-Ince-Gaussian (AiHIG) light bullets is investigated by solving the (3+1)D linear spatiotemporal evolution equation of an optical field analytically. As far as we know, the numerical experimental demonstrations of the Ince-Gaussian (IG) and Helical-Ince-Gaussian (HIG) beams in various modes are first developed to study the evolution characteristics of the different 3D spatiotemporal light bullets. A conclusion can be drawn that the different photoelastics, pulse stacked, boundary, elliptical ring and physically separated in-line vortices can be achieved by adjusting the ellipticity, the evolution distance and the mode-number of light bullets.

Atypical gunshot injury to the right side of the face with the bullet lodged in the carotid sheath: a case report.

PubMed

Ongom, Peter A; Kijjambu, Stephen C; Jombwe, Josephat

2014-01-27

Gunshot injuries of the head and neck from the AK-47 rifle (a common assault rifle, submachine gun type) are a significant contributor to morbidity and mortality among civilians in Sub-Saharan Africa. They may cause significant damage to the closely arranged structures in this region, and the bullet's trajectory can be very difficult to determine. We present an unusual case of gunshot injury with an atypical bullet entry wound, profound injury to the face, lodgment in the right carotid sheath, and 'wandering'; a first of its kind in East Africa. A 27-year-old African-Ugandan woman of Nilotic ethnicity was referred to the Accident and Emergency Department of a tertiary hospital in Uganda, having sustained complex injuries due to an inadvertent AK-47 rifle gunshot injury. The gunshot injury was to the right side of her face with a large ragged entry wound and no exit wound. Prior basic wound care and radiological imaging showed a comminuted fracture of her mandible with lodgment of the bullet in her neck, anterior to her sixth and seventh cervical vertebrae. Standard debridement of her wound was done. A computed tomography scan showed an apparent cephalad shift ('wandering') of the bullet, leaving it lying partially anterior to her fifth cervical vertebra as well as within her carotid sheath. Other injuries were to her facial and trigeminal nerves, and her middle ear. The 'wandering' bullet was successfully removed surgically. It had caused no damage to any part of her neck structure. AK-47 rifle bullet injuries may present with uncharacteristically large entry wounds and cause complex structural injuries at the area of impact. The consequent trajectory is difficult to predict making regional examination and radiological investigations essential in management. Bullets may be retained, leaving no exit wound. Securing the airway, controlling hemorrhage and identifying other injuries are the first vital steps. This case illustrates all these interventions and the important decision to extract the entrapped bullet from the patient's neck because it had started to 'wander' and could have caused grave injury over time with further migration. Maxillofacial, plastic, trauma, general and military surgeons, otorhinolaryngologists and emergency physicians can gain from this experience because it calls for a multidisciplinary team approach.

Xyce Parallel Electronic Simulator : users' guide, version 2.0.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoekstra, Robert John; Waters, Lon J.; Rankin, Eric Lamont

2004-06-01

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator capable of simulating electrical circuits at a variety of abstraction levels. Primarily, Xyce has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability the current state-of-the-art in the following areas: {sm_bullet} Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). Note that this includes support for most popular parallel and serial computers. {sm_bullet} Improved performance for allmore » numerical kernels (e.g., time integrator, nonlinear and linear solvers) through state-of-the-art algorithms and novel techniques. {sm_bullet} Device models which are specifically tailored to meet Sandia's needs, including many radiation-aware devices. {sm_bullet} A client-server or multi-tiered operating model wherein the numerical kernel can operate independently of the graphical user interface (GUI). {sm_bullet} Object-oriented code design and implementation using modern coding practices that ensure that the Xyce Parallel Electronic Simulator will be maintainable and extensible far into the future. Xyce is a parallel code in the most general sense of the phrase - a message passing of computing platforms. These include serial, shared-memory and distributed-memory parallel implementation - which allows it to run efficiently on the widest possible number parallel as well as heterogeneous platforms. Careful attention has been paid to the specific nature of circuit-simulation problems to ensure that optimal parallel efficiency is achieved as the number of processors grows. One feature required by designers is the ability to add device models, many specific to the needs of Sandia, to the code. To this end, the device package in the Xyce These input formats include standard analytical models, behavioral models look-up Parallel Electronic Simulator is designed to support a variety of device model inputs. tables, and mesh-level PDE device models. Combined with this flexible interface is an architectural design that greatly simplifies the addition of circuit models. One of the most important feature of Xyce is in providing a platform for computational research and development aimed specifically at the needs of the Laboratory. With Xyce, Sandia now has an 'in-house' capability with which both new electrical (e.g., device model development) and algorithmic (e.g., faster time-integration methods) research and development can be performed. Ultimately, these capabilities are migrated to end users.« less

Bullet fragmentation preceding a contour shot: case study and experimental simulation.

PubMed

Sterzik, V; Kneubuehl, B P; Bohnert, M; Riva, F; Glardon, M

2017-01-01

In medico-legal literature, only a small number of publications deal with lethal injuries caused by shots with modified guns. This might lead to the conclusion that such cases are extremely rare. However, there are cases again and yet again. During the investigation process, the modified gun is of particular importance since it can show an unusual ballistic behaviour. The present paper reports on a suicide of a 60-year-old man, committed with a modified revolver and a lead bullet. The man had a single gunshot wound with entrance at the right temporal bone. Autopsy revealed that the bullet had fragmented into two major parts. The smaller one stood outside the cranial cavity and pushed its way alongside between the cranial bone and scalp to its end position in the left temporal area. The bigger part entered the cranial cavity and ended in the left parietal lobe. In shots on ballistic soap and on a head-model, the ballistics of the weapon and lead bullet were characterized. The angle necessary for bullet fragmentation was determined by shots on ballistic soap and turned out to be 55°-60° at a velocity of around 200 m/s. This knowledge was transferred to contact shots on a head-model consisting of a layered polyurethane sphere filled with 10 % ballistic gelatine and covered with a skin-like cap almost all around. The resulting injury pattern corresponded to the one of the suicide person. The bigger bullet part entered the skull while the smaller part pushed its way alongside between skin and skull causing an outer contour shot. Furthermore, the revolver was documented firing off two bullets by one trigger pull-a phenomenon of importance for forensic casework the authors have not found reported in forensic literature.

CALL FOR PAPERS: Optical implementation of quantum computers

NASA Astrophysics Data System (ADS)

Rarity, John; Weinfurter, Harald

2004-09-01

A topical issue of Journal of Optics B: Quantum and Semiclassical Optics will be devoted to recent advances in optical implementation of quantum computers. The topics to be covered will include, but are not limited to: bullet Linear optics quantum gates bullet Progress towards nonlinear optics quantum gates bullet Interface between optical qubits and atomic/solid state qubits bullet Novel architectures bullet Single-photon sources and detectors bullet Photonic quantum networks bullet Few-qubit applications The DEADLINE for submission of contributions is 15 January 2005 to allow the topical issue to be published in about October 2005. All contributions will be peer-reviewed in accordance with the normal refereeing procedures and standards of Journal of Optics B: Quantum and Semiclassical Optics. Submissions should preferably be in either standard LaTeX form or Microsoft Word. Advice on publishing your work in the journal may be found at www.iop.org/journals/authors/jopb. There are no page charges for publication. The corresponding author of each paper published will receive a complimentary copy of the topical issue. Contributions to the topical issue should preferably be submitted electronically at www.iop.org/journals/authors/jopb or by e-mail to jopb@iop.org. Authors unable to submit online or by e-mail may send hard copy contributions (enclosing the electronic code) to: Dr Claire Bedrock (Publisher), Journal of Optics B: Quantum and Semiclassical Optics, Institute of Physics Publishing, Dirac House, Temple Back, Bristol BS1 6BE, UK. All contributions should be accompanied by a readme file or covering letter, quoting `JOPB Topical Issue - Optical implementation of quantum computers', giving the postal and e-mail addresses for correspondence. Any subsequent change of address should be notified to the publishing office. We look forward to receiving your contribution to this topical issue.

Terminal Performance of Lead Free Pistol Bullets in Ballistic Gelatin Using Retarding Force Analysis from High Speed Video

DTIC Science & Technology

2016-04-04

Terminal Performance of Lead-Free Pistol Bullets in Ballistic Gelatin Using Retarding Force Analysis from High Speed Video ELIJAH COURTNEY, AMY...quantified using high speed video . The temporary stretch cavities and permanent wound cavities are also characterized. Two factors tend to re- duce the...Performance of Lead-Free Pistol Bullets in Ballistic Gelatin Using Retarding Force Analysis from High Speed Video cavity. In addition, stretching can also

The Balsa bullet: A high speed, low-cost general aviation aircraft for Aeroworld

NASA Technical Reports Server (NTRS)

Eastland, Kevin; Greenwood, Sean; Kelly, Dan; Leonard, Chuck; Rooff, John; Scherock, Jeff

1994-01-01

The Balsa Bullet is a high speed, low cost six passenger general aviation aircraft. It will cruise at a speed of 55 ft/s with a maximum speed of 75 ft/s for distances in excess of 27000 feet. This range and speed combination provide The Balsa Bullet with the capability to service any two existing airports in Aeroworld in an efficient and timely manner. Overall, three major design drivers have been identified by the design team. The first is to provide a low cost airplane to the Aeroworld market. Maintaining the low cost objective will not simply meet the mission objective, but will also make the Bullet an economically viable option for a wide number of consumers. The Balsa Bullet has a total manufacturing cost of $1000 with a price to the consumer of only $2562. The second major driver is high speed performance. Once again this driver exists not only to meet the mission objective given Long Shot Aeronautics but it provides a desirable feature to the consumer, pride in owning the fastest aircraft in Aeroworld. The third design driver identified is the capability to service any runway in Aeroworld necessitating the ability to takeoff within 28 ft, the length of the shortest runways in Aeroworld. These design drivers provide three great reasons for the general public to purchase a Bullet.

Direction, site and the muzzle target distance of bullet in the head and neck at close range as an indication of suicide or homicide.

PubMed

Suwanjutha, T

1988-05-01

Direction, site and muzzle target distance can indicate suicide or homicide. This conclusion can be drawn from autopsies of 57 cases of suicide and 68 cases of homicide by handgun fired at close range to the head and neck together with going to the crimescene in some cases. This study was carried out in Bangkok during the period from January 1983 to January 1986. In order to determine whether it was suicide or homicide, the path of the bullet, the site, the muzzle target distance must be considered. The angle of the bullet would be either elevated (from below upward), horizontal or an angle of depression (from above downward). For suicide, the direction of the bullet should be at an angle of elevation in the majority of cases. The position of the handgun in relation to the head in suicide was most often in tight contact and near contact. For homicide, the direction of the bullet should be horizontal in most cases. The bullet was at close range in the majority of the cases. There are 8 common sites for suicide and homicide and 10 different sites in the case of homicide which are at neck, left cheek, left aural region, lip, left occipital area orbit, chin, left eyebrow, submental and nose.

An Analysis of the Characteristics of Thoracic and Abdominal Injuries Due to Gunshot Homicides in Israel.

PubMed

Maiden, Nicholas R; Hiss, Jehuda; Gips, Hadas; Hocherman, Gil; Levin, Nadav; Kosachevsky, Olga; Vinokurov, Asya; Zelkowicz, Avraham; Byard, Roger W

2016-01-01

De-identified wound data from 197 homicidal gunshot postmortems were obtained between 2000 and 2008. Forensic ballistics data were only available for cases between 2004 and 2008. Males represent 91% of gunshot victims and were struck in the thorax/abdomen with an average of 2.3 bullets. The type of firearms involved were semi-automatic pistols in the predominant caliber 9-mm Luger and assault rifles in caliber 5.56 × 45 mm and caliber 7.62 × 39 mm Soviet, using full metal jacket bullets. The majority of shootings occurred at ranges of 1 m or greater. The most common bullet path was front to back in 66% of cases. Entry wounds occurred more often on the left side of the thorax, abdomen, and back. The most common critical organs/tissues to sustain bullet trauma in descending order were as follows: heart, lungs, liver, aorta, spleen, kidneys, and vena cava. Ribs were struck by most bullets that entered the thorax. © 2015 American Academy of Forensic Sciences.

A Bullet-Block Experiment that Explains the Chain Fountain

NASA Astrophysics Data System (ADS)

Pantaleone, J.; Smith, R.

2018-05-01

It is common in science for two phenomena to appear to be very different, but in fact follow from the same basic principles. Here we consider such a case, the connection between the chain fountain and a bullet-block collision experiment. When an upward moving bullet strikes a wooden block resting on a horizontal table, the block will rise to a higher height when the bullet strikes near the end of the block. This is because the quickly rotating block experiences an additional upward "reaction" force from its contact with the table. Such a reaction force also explains the chain fountain. When a chain falls from a pile in a container to the floor below, the chain rises up above the container. This rise occurs because the quickly rotating links in the container push off of the surface beneath them. We derive a model that accurately describes our measurements in the bullet-block experiment, and then use this same model to calculate an approximate expression for the distance the chain rises above the container. More extensive discussions of the chain fountain are available elsewhere.

Interaction of Supernova Blast Waves with Wind-Driven Shells: Formation of "Jets", "Bullets", "Ears", Etc.

NASA Astrophysics Data System (ADS)

Gvaramadze, V. V.

Most of middle-aged supernova remnants (SNRs) have a distorted and complicated appearance which cannot be explained in the framework of the Sedov-Taylor model. We consider three typical examples of such SNRs (Vela SNR, MSH15-52, G309.2-00.6) and show that their structure could be explained as a result of interaction of a supernova (SN) blast wave with the ambient medium preprocessed by the action of the SN progenitor's wind and ionized emission.

Methane fluxes, microbes and carbonate mounds: insights from asin modelling of the porcupine basin, ireland

NASA Astrophysics Data System (ADS)

Naeth, J.; di Primio, R.; Schäfer, R. G.; Horsfield, B.

2003-04-01

Our broad task has been to investigate the origin and growth of large carbonate mounds within the Porcupine Basin offshore Ireland. Specifically, the project aims at determining the timing and magnitude of chemical degradation and physical redistribution processes which are likely to have played a key role in the formation of carbonate mounds. We addressed these issues using 2D basin modelling the results of which were used for map-based migration modelling. The overall sedimentary basin architecture of the basin facilitates up-dip fluid migration towards the western, eastern and especially the northern margins of the basin. Potential fluid migration pathways are available through a variety of stratal surfaces, unconformities, faults and detachments. The spatial association of deep water carbonate mounds with underlying fluid pathways is compatible with the provision of a basin-derived nutrient source (e.g. hydrocarbons). Numerical simulations lie at the centre of the investigation using three seismic lines covering the Hovland-Magellan mound area in the northern part of the basin and the Belgica mound area in the western part. The calibration of the thermal history was performed by iteratively using putative heat-flow scenarios in compliance with the known geologic evolution of the basin, present-day temperatures, organic maturity parameters, overpressure occurrence and assigned lithologies. After optimisation of the model, the generation and migration history of potential source units were modelled using, inter alia, the source richness and quality assignments referred to above and kinetic parameters of hydrocarbon generation determined experimentally. The results achieved indicate that: bullet hydrocarbon generation and expulsion is currently taking place in the vicinity of the mound locations bullet stratigraphic pinch outs and shallow structural closures underly most mounds bullet a high temporal and spatial resolution of the latest Tertiary and Quaternary events in combination with accurate paleo-water depth reconstructions are of critical importance for recognition of leakage pathways leading to the sea floor bullet the onset of carbonate mound growth coincides with the predicted timing of maximum thermogenic methane fluxes to the sea floor

Ames Lab 101: osgBullet

ScienceCinema

McCorkle, Doug

2017-12-27

Ames Laboratory scientist Doug McCorkle explains osgBullet, a 3-D virtual simulation software, and how it helps engineers design complex products and systems in a realistic, real-time virtual environment.

Beyond magic bullets: true innovation in health care.

PubMed

Narayan, Vaibhav A; Mohwinckel, Marco; Pisano, Gary; Yang, Michael; Manji, Husseini K

2013-02-01

The time has come to move beyond product-focused 'magic bullet' therapeutic development strategies towards models that can also incorporate devices, tools and services to provide integrated health-care solutions.

The Impact of the Method of Gunshot Injury: War Injuries vs. Stray Bullets vs. Civilian Fighting.

PubMed

Mansor, Salah; Bodalal, Zuhir

2015-04-01

To analyze the impact of the method of Gunshot Injury (GSI) (i.e. war injuries, stray bullets, and civilian fighting) on patient morbidity and mortality. An observational study. Biostatistics Department of Al-Jalaa Hospital in Benghazi, Libya, from January to December 2011. Patients' records were analyzed with the method of gunshot injury as a classifying/comparative parameter. Age, gender, site of injury, receiving department, ICU admission, city of origin, length of stay, morbidity and mortality were determined and compared between the different methods of GSI. During the conflict, 1761 gunshot injuries were treated at the hospital. The method of injury was recorded for 62% (n=1096) of the cases and were classified under war injuries (72.2%, n=791), stray bullets (14.1%, n=155), and civilian fighting (13.7%, n=150). Nearly all the patients being treated for civilian fighting (98%, n=147) were males, (stray bullets, 82.6%, n=128, and war injuries 98.4%, n=778). Women were significantly less involved in a war injury (1.6%, n=13, p < 0.001). Stray bullets affected the younger age groups i.e. ² 19 years (26.5%, n=41) more than either fighting injuries (8%, n=12) or war injuries (11.8%, n=93, p < 0.001). Civilian fighting injuries (83.3%, n=125) mostly involved the 20-39 years age group (p < 0.001). Fighting wounds and stray bullets were more common in an urban (82.7%, n=124) rather than rural setting (p < 0.001); the same was true for stray bullets (76.8%, n = 119). The number of GSI's showed a close relationship with major events in society (i.e. military campaigns, celebration and civilian unrest). Significantly higher mortality rates were observed in civilian fighting injuries (7.7%, n=12, p=0.003) and stray bullets (10%, n=15, p=0.003) compared to general GSI's (5.2%, n=91) and war injuries (4.4%, n=35). Surgeons and general physicians need to be aware that GSI's differ in their salient features and outcome based on the method of injury.

The far-infrared/submillimeter properties of galaxies located behind the Bullet cluster

NASA Astrophysics Data System (ADS)

Rex, M.; Rawle, T. D.; Egami, E.; Pérez-González, P. G.; Zemcov, M.; Aretxaga, I.; Chung, S. M.; Fadda, D.; Gonzalez, A. H.; Hughes, D. H.; Horellou, C.; Johansson, D.; Kneib, J.-P.; Richard, J.; Altieri, B.; Fiedler, A. K.; Pereira, M. J.; Rieke, G. H.; Smail, I.; Valtchanov, I.; Blain, A. W.; Bock, J. J.; Boone, F.; Bridge, C. R.; Clement, B.; Combes, F.; Dowell, C. D.; Dessauges-Zavadsky, M.; Ilbert, O.; Ivison, R. J.; Jauzac, M.; Lutz, D.; Omont, A.; Pelló, R.; Rodighiero, G.; Schaerer, D.; Smith, G. P.; Walth, G. L.; van der Werf, P.; Werner, M. W.; Austermann, J. E.; Ezawa, H.; Kawabe, R.; Kohno, K.; Perera, T. A.; Scott, K. S.; Wilson, G. W.; Yun, M. S.

2010-07-01

The Herschel Lensing Survey (HLS) takes advantage of gravitational lensing by massive galaxy clusters to sample a population of high-redshift galaxies which are too faint to be detected above the confusion limit of current far-infrared/submillimeter telescopes. Measurements from 100-500 μm bracket the peaks of the far-infrared spectral energy distributions of these galaxies, characterizing their infrared luminosities and star formation rates. We introduce initial results from our science demonstration phase observations, directed toward the Bullet cluster (1E0657-56). By combining our observations with LABOCA 870 μm and AzTEC 1.1 mm data we fully constrain the spectral energy distributions of 19 MIPS 24 μm-selected galaxies which are located behind the cluster. We find that their colors are best fit using templates based on local galaxies with systematically lower infrared luminosities. This suggests that our sources are not like local ultra-luminous infrared galaxies in which vigorous star formation is contained in a compact highly dust-obscured region. Instead, they appear to be scaled up versions of lower luminosity local galaxies with star formation occurring on larger physical scales. Herschel is an ESA space observatory with science instruments provided by European-led Principal Investigator consortia and with important participation from NASA. Data presented in this paper were analyzed using “The Herschel interactive processing environment (HIPE)”, a joint development by the Herschel Science Ground Segment Consortium, consisting of ESA, the NASA Herschel Science Center, and the HIFI, PACS, and SPIRE consortia.Table 1 and Figs. 3, 4 are only available in electronic form at http://www.aanda.org

4. NORTHWEST FRONT, WITH FOUR BULLET GLASS WINDOWS. Edwards ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. NORTHWEST FRONT, WITH FOUR BULLET GLASS WINDOWS. - Edwards Air Force Base, South Base Sled Track, Observation Block House, Station "O" area, east end of Sled Track, Lancaster, Los Angeles County, CA

Photonic Switching Devices Using Light Bullets

NASA Technical Reports Server (NTRS)

Goorjian, Peter M. (Inventor)

1999-01-01

A unique ultra-fast, all-optical switching device or switch is made with readily available, relatively inexpensive, highly nonlinear optical materials. which includes highly nonlinear optical glasses, semiconductor crystals and/or multiple quantum well semiconductor materials. At the specified wavelengths. these optical materials have a sufficiently negative group velocity dispersion and high nonlinear index of refraction to support stable light bullets. The light bullets counter-propagate through, and interact within the waveguide to selectively change each others' directions of propagation into predetermined channels. In one embodiment, the switch utilizes a rectangularly planar slab waveguide. and further includes two central channels and a plurality of lateral channels for guiding the light bullets into and out of the waveguide. An advantage of the present all-optical switching device lies in its practical use of light bullets, thus preventing the degeneration of the pulses due to dispersion and diffraction at the front and back of the pulses. Another advantage of the switching device is the relative insensitivity of the collision process to the time difference in which the counter-propagating pulses enter the waveguide. since. contrary to conventional co-propagating spatial solitons, the relative phase of the colliding pulses does not affect the interaction of these pulses. Yet another feature of the present all-optical switching device is the selection of the light pulse parameters which enables the generation of light bullets in nonlinear optical materials. including highly nonlinear optical glasses and semiconductor materials such as semiconductor crystals and/or multiple quantum well semiconductor materials.

[Computed tomography in gunshot trauma. I. Ballistics elements and the mechanisms of the lesions].

PubMed

Scialpi, M; Magli, T; Boccuzzi, F; Scapati, C

1995-04-01

The knowledge of wound ballistics and of wounding mechanisms is mandatory for the radiologist to interpret the CT findings of gunshot wounds. The severity of a bullet wound depends on the characteristics of the tissue it goes through, i.e., tissue elasticity, density, thickness of the wounded body part, the type of tissue, its specific gravity, internal cohesiveness and anatomical relationships, as well as on missile characteristics, i.e., mass, shape, fragmentation and deformation. Bullet velocity is certainly a major factor in wounding, but it is only one factor. Two major wounding mechanisms exist the crushing of the bullet-struck tissue (forming the permanent cavity) and radial stretching (forming a temporary cavity). Bullet "yaw" is defined as the angle between the long axis of the bullet and its flight path. The yaw is directly proportional to tissue crushing and stretching: the wider the yaw, the most severe tissue crushing and stretching and, therefore, the more severe tissue damage. The basic knowledge of these concepts is of the utmost importance to understand the CT findings of gunshot wounds and can help physicians study and treat gunshot wounds.

Rifle bullet penetration into ballistic gelatin.

PubMed

Wen, Yaoke; Xu, Cheng; Jin, Yongxi; Batra, R C

2017-03-01

The penetration of a rifle bullet into a block of ballistic gelatin is experimentally and computationally studied for enhancing our understanding of the damage caused to human soft tissues. The gelatin is modeled as an isotropic and homogeneous elastic-plastic linearly strain-hardening material that obeys a polynomial equation of state. Effects of numerical uncertainties on penetration characteristics are found by repeating simulations with minute variations in the impact speed and the angle of attack. The temporary cavity formed in the gelatin and seen in pictures taken by two high speed cameras is found to compare well with the computed one. The computed time histories of the hydrostatic pressure at points situated 60 mm above the line of impact are found to have "two peaks", one due to the bullet impact and the other due to the bullet tumbling. Contours of the von Mises stress and of the effective plastic strain in the gelatin block imply that a very small region adjacent to the cavity surface is plastically deformed. The angle of attack is found to noticeably affect the penetration depth at the instant of the bullet tumbling through 90°. Copyright © 2016 Elsevier Ltd. All rights reserved.

Low velocity gunshot wounds result in significant contamination regardless of ballistic characteristics.

PubMed

Weinstein, Joseph; Putney, Emily; Egol, Kenneth

2014-01-01

Controversy exists among the orthopedic community regarding the treatment of gunshot injuries. No consistent treatment algorithm exists for treatment of low energy gunshot wound (GSW) trauma. The purpose of this study was to critically examine the wound contamination following low velocity GSW based upon bullet caliber and clothing fiber type found within the injury track. Four types of handguns were fired at ballistic gel from a 10-foot distance. Various clothing materials were applied (denim, cotton, polyester, and wool) circumferentially around the tissue agar in a loose manor. A total of 32 specimens were examined. Each caliber handgun was fired a minimum of 5 times into a gel. Regardless of bullet caliber there was gross contamination of the entire bullet track in 100% of specimens in all scenarios and for all fiber types. Furthermore, as would be expected, the degree of contamination appeared to increase as the size of the bullet increased. Low velocity GSWs result in significant contamination regardless of bullet caliber and jacket type. Based upon our results further investigation of low velocity GSW tracks is warranted. Further clinical investigation should focus on the degree to which debridement should be undertaken.

Retained Lumbar Bullet: A Case Report of Chronic Lead Toxicity and Review of the Literature.

PubMed

Bustamante, Nirma D; Macias-Konstantopoulos, Wendy L

2016-07-01

Lead toxicity from retained bullet fragments is difficult to both predict and diagnose, but important to treat early, given the potential severity of disease. Blood lead levels > 25 μg/dL and 40 μg/dL are considered toxic in children and adults, respectively. Symptoms may range from nonspecific constitutional symptoms to seizures and coma. Chelation is the mainstay therapy for lead poisoning and levels to treat depend on patient age, blood lead levels, and the presence of symptoms. CASE  We present the case of a woman with symptoms of severe lead toxicity from 20-year-old retained bullet fragments. She had been seen by multiple providers for evaluation of each symptom, but a unifying diagnosis had not been found. After identifying this complication, she was treated appropriately and more serious complications were prevented. WHY SHOULD AN EMERGENCY PHYSICIAN BE AWARE OF THIS?: We present this case to increase awareness among emergency physicians of lead toxicity in patients with a seemingly unrelated constellation of symptoms and a history of a previous gunshot wound with retained bullet or bullet fragments. Copyright © 2016 Elsevier Inc. All rights reserved.

The application of computed tomography in wound ballistics research

NASA Astrophysics Data System (ADS)

Tsiatis, Nick; Moraitis, Konstantinos; Papadodima, Stavroula; Spiliopoulou, Chara; Kelekis, Alexis; Kelesis, Christos; Efstathopoulos, Efstathios; Kordolaimi, Sofia; Ploussi, Agapi

2015-09-01

In wound ballistics research there is a relationship between the data that characterize a bullet and the injury resulted after shooting when it perforates the human body. The bullet path in the human body following skin perforation as well as the damaging effect cannot always be predictable as they depend on various factors such as the bullet's characteristics (velocity, distance, type of firearm and so on) and the tissue types that the bullet passes through. The purpose of this presentation is to highlight the contribution of Computed Tomography (CT) in wound ballistics research. Using CT technology and studying virtual “slices” of specific areas on scanned human bodies, allows the evaluation of density and thickness of the skin, the subcutaneous tissue, the muscles, the vital organs and the bones. Density data taken from Hounsfield units can be converted in g/ml by using the appropriate software. By evaluating the results of this study, the anatomy of the human body utilizing ballistic gel will be reproduced in order to simulate the path that a bullet follows. The biophysical analysis in wound ballistics provides another application of CT technology, which is commonly used for diagnostic and therapeutic purposes in various medical disciplines.

3. NORTH FRONT, BULLET GLASS OBSERVATION WINDOWS FACE SLED TRACK. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. NORTH FRONT, BULLET GLASS OBSERVATION WINDOWS FACE SLED TRACK. - Edwards Air Force Base, South Base Sled Track, Instrumentation & Control Building, South of Sled Track, Station "50" area, Lancaster, Los Angeles County, CA

Rapid Changes in the Structure of the BN Object

NASA Technical Reports Server (NTRS)

Danchi, William C.; Gezari, D. Y.; Greenhill, L. J.; Najita, J.; Monnier, J. D.; Tuthill, P. G.; Wishnow, E. H.; Townes, C. H.; Fisher, Richard R. (Technical Monitor)

2001-01-01

The BN/KL region in Orion is the archetypal region of high-mass star formation, radiating approx. 10(sup)5 Lsun and displaying promininent bulk outflows. In particular, there is no certain identification of the sources responsible for the high luminosity and outflows, and is the origin of a major explosive event (Shultz et al. 1999, ApJ, 511, 282). Using 18.7 and 12.5 micron data from observations in December 1999 and October 2000 made at the Keck I telescope, we discovered that the BN Object has a companion previously seen only at radio wavelengths (Menten & Reid 1995, ApJ, 445, L157). We call this companion B2 and it is about 1.5 arcsec West of the bright component. We also see changes in the shape of BN and the emission of "blobs" or "bullets" of material. While B2 remains unchanged and in the same place between the two epochs, there is an additional structure in BN to the South-South-East and the North-East, as well as a finger of material pointing North from B2 itself. Such a change has not been seen before in the infrared. We have looked very carefully at these images, calibrator images taken within a few minutes of the source images, as well as our previous images and cannot find any technical faults with the data. We explore the implications of these results, in particular, can these features be connected with previously observed "bullets" or "fingers" (see Allen & Burton 1993, for example), making BN a source for the bullets, implying they are not from IRc2 as previously thought? Or could they be produced by an interaction between material from BN and other sources such as IRc2?

The weathering and transformation process of lead in China's shooting ranges.

PubMed

Li, Yeling; Zhu, Yongbing; Zhao, Sanping; Liu, Xiaodong

2015-09-01

Corroding steel-core bullets from three shooting ranges in different climate zones of China were collected. Multiple technical methods (EMPA, SEM, XRD, and ICP-OES) were applied to investigate the structure, morphology, and weathering product of this type of bullet in China to analyze the weathering mechanisms in different types of soils. A scanning electron microscope (SEM) was used to view the morphology and microstructure of corrosion layers. On the corroded lead layer surface, unevenness, micro cracks, and spallation were usually present. Around the micro cracks, many types of euhedral and subhedral crystals of the secondary products of lead were formed, most of which were composed of cerussite (PbCO3), while hydrocerussite (Pb3(CO3)2(OH)2) was predominant in the bullet collected from the humid environment. X-ray power diffraction (XRD) results show that the secondary weathering products in the three shooting range soils are clearly different. In the Fangyan shooting range, which has a neutral and semi-arid soil, the lead weathering product was mainly hydrocerussite (Pb3(CO3)2(OH)2), while no substantial amount of crystal phase of lead compound could be found in acidic, damp soils from the Fenghuang shooting range, possibly due to the enhanced dissolution and mobilization of lead compounds at lower pH and higher content of organic matter in the soil. In hot and arid environment of the Baicheng shooting range, cerussite might have undergone thermal decomposition, thus generating shannonite (Pb2O(CO3)). These results indicate that the formation of secondary Pb minerals is largely affected by the climatic zone or the soil properties, which may have implications for range management practices.

6. SOUTH SIDE, DETAIL OF BULLET GLASS WINDOWS AT GROUND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. SOUTH SIDE, DETAIL OF BULLET GLASS WINDOWS AT GROUND LEVEL. - Edwards Air Force Base, South Base Sled Track, Firing Control Blockhouse, South of Sled Track at east end, Lancaster, Los Angeles County, CA

Bullet Impact Safety Study of PBX-9502

NASA Astrophysics Data System (ADS)

Ferranti, Louis

2013-06-01

A new small arms capability for performing bullet impact testing into energetic materials has recently been activated at Lawrence Livermore National Laboratory located in the High Explosives Applications Facility (HEAF). The initial capability includes 0.223, 0.30, and 0.50 testing calibers with the flexibility to add other barrels in the near future. An initial test series has been performed using the 0.50 caliber barrel shooting bullets into targets using the TATB based explosive PBX-9502 and shows an expected non-violent reaction. Future experiments to evaluate the safety of new explosive formulations to bullet impact are planned. A highlight of the new capability along with discussion of the initial experiments to date will be presented including future areas of research. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

SWEIS annual review - CY2002 : a comparison of CY2002 operations to projections included in the site-wide environmental impact statement for continued operation of Sandia National Laboratories/New Mexico.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bayliss, Linda Sue; White, Brenda Bailey; Guerrero, Joseph Vincent

2003-10-01

The SNL/NM CY2002 SWEIS Annual Review discusses changes in facilities and facility operations that have occurred in selected and notable facilities since source data were collected for the SNL/NM SWEIS (DOE/EIS-0281). The following information is presented: {sm_bullet} An updated overview of SNL/NM selected and notable facilities and infrastructure capabilities. {sm_bullet} An overview of SNL/NM environment, safety, and health programs, including summaries of the purpose, operations, activities, hazards, and hazard controls at relevant facilities and risk management methods for SNL/NM. {sm_bullet} Updated base year activities data, together with related inventories, material consumption, emissions, waste, and resource consumption. {sm_bullet} Appendices summarizing activitiesmore » and related hazards at SNL/NM individual special, general, and highbay laboratories, and chemical purchases.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

LaFreniere, L. M.; Environmental Science Division

The results of the 2006 investigation of contaminant sources at Navarre, Kansas, clearly demonstrate the following: {sm_bullet} Sources of carbon tetrachloride contamination were found on the Navarre Co-op property. These sources are the locations of the highest concentrations of carbon tetrachloride found in soil and groundwater at Navarre. The ongoing groundwater contamination at Navarre originates from these sources. {sm_bullet} The sources on the Co-op property are in locations where the Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) never conducted grain storage operations. {sm_bullet} No definitive sources of carbon tetrachloride were identified on the portion of the currentmore » Co-op property formerly used by the CCC/USDA. {sm_bullet} The source areas on the Co-op property are consistent with the locations of the most intense Co-op operations, both historically and at present. The Co-op historically stored carbon tetrachloride for retail sale and used it as a grain fumigant in these locations. {sm_bullet} The distribution patterns of other contaminants (tetrachloroethene and nitrate) originating from sources on the Co-op property mimic the carbon tetrachloride plume. These other contaminants are not associated with CCC/USDA operations. {sm_bullet} The distribution of carbon tetrachloride at the Co-op source areas, particularly the absence of contamination in soils at depths less than 20 ft below ground level, is consistent with vertical migration into the subsurface through a conduit (well Co-op 2), with subsequent lateral migration through the subsurface. {sm_bullet} The groundwater flow direction, which is toward the west-northwest, is not consistent with migration of carbon tetrachloride in groundwater from the former CCC/USDA property to the source areas on the Co-op property. {sm_bullet} The absence of soil and groundwater contamination along surface drainage pathways on the former CCC/USDA property is not consistent with migration of carbon tetrachloride in surface water runoff from the former CCC/USDA property to the source areas on the Co-op property. {sm_bullet} The contamination detected in soil and groundwater samples collected along the northern boundary of the former CCC/USDA facility can be attributed to migration from the Co-op sources or to operations of the Co-op on the property after CCC/USDA operations ended. {sm_bullet} The southern boundary of the Co-op property has expanded over time, so that the Co-op has operated for a lengthy period in all areas previously leased by the CCC/USDA (Figure S.1). The Co-op began expanding onto the former CCC/USDA property in 1969 and has operated on that property longer than the CCC/USDA did. The use of carbon tetrachloride as a grain fumigant was standard industry practice until 1985, when the compound was banned by the U.S. Environmental Protection Agency. {sm_bullet} Petroleum-related contamination was detected on the southern part of the former CCC/USDA property. This contamination is associated with aboveground storage tanks that are owned and operated by the Co-op. The major findings of the 2006 investigations are summarized in greater detail below. The 2006 investigation was implemented by the Environmental Science Division of Argonne National Laboratory on behalf of the CCC/USDA.« less

Dimensions and aspect ratios of natural ice crystals

DOE PAGES

Um, J.; McFarquhar, G. M.; Hong, Y. P.; ...

2015-04-15

During the 2006 Tropical Warm Pool International Cloud Experiment (TWP-ICE) in the tropics, the 2008 Indirect and Semi-Direct Aerosol Campaign (ISDAC) in the Arctic, and the 2010 Small PARTicles In CirrUS (SPARTICUS) campaign at mid-latitudes, high-resolution images of ice crystals were recorded by a Cloud Particle Imager at temperatures ( T) between -87 and 0 °C. The projected maximum dimension ( D'), length ( L'), and width ( W') of pristine columns, plates, and component bullets of bullet rosettes were measured using newly developed software, the Ice Crystal Ruler. The number of bullets in each bullet rosette was also measured.more » Column crystals were further distinguished as either horizontally oriented columns or columns with other orientations to eliminate any orientation effect on the measured dimensions. The dimensions and aspect ratios (AR, the dimension of the major axis divided by the dimension of the minor axis) of crystals were determined as functions of temperature, geophysical location, and type of cirrus. Dimensions of crystals generally increased with temperature. Columns and bullets had larger dimensions (i.e., W') of the minor axis (i.e., a axis) for a given dimension (i.e., D' or L') of the major axis (i.e., c axis), and thus smaller AR, as T increased, whereas this trend did not occur for plate crystals. The average number of branches in bullet rosettes was 5.50 ± 1.35 during three campaigns and 6.32 ± 1.34 (5.46 ± 1.34; 4.95 ± 1.01) during TWP-ICE (SPARTICUS; ISDAC). The AR of bullets increased with the number of branches in bullet rosettes. Most dimensions of crystals and ARs of columnar crystals measured during SPARTICUS were larger than those measured during TWP-ICE and ISDAC at −67 < T < -35 °C and at −40 < T < −15 °C, respectively. The relative occurrence of varying pristine habits depended strongly on cirrus type (i.e., anvil or non-anvil clouds), with plates especially occurring more frequently in anvils. Finally, the L– W relationships of columns derived using current data exhibited a strong dependence on temperature; similar relationships determined in previous studies were within the range of the current data.« less

Dimensions and aspect ratios of natural ice crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Um, J.; McFarquhar, G. M.; Hong, Y. P.

During the 2006 Tropical Warm Pool International Cloud Experiment (TWP-ICE) in the tropics, the 2008 Indirect and Semi-Direct Aerosol Campaign (ISDAC) in the Arctic, and the 2010 Small PARTicles In CirrUS (SPARTICUS) campaign at mid-latitudes, high-resolution images of ice crystals were recorded by a Cloud Particle Imager at temperatures ( T) between -87 and 0 °C. The projected maximum dimension ( D'), length ( L'), and width ( W') of pristine columns, plates, and component bullets of bullet rosettes were measured using newly developed software, the Ice Crystal Ruler. The number of bullets in each bullet rosette was also measured.more » Column crystals were further distinguished as either horizontally oriented columns or columns with other orientations to eliminate any orientation effect on the measured dimensions. The dimensions and aspect ratios (AR, the dimension of the major axis divided by the dimension of the minor axis) of crystals were determined as functions of temperature, geophysical location, and type of cirrus. Dimensions of crystals generally increased with temperature. Columns and bullets had larger dimensions (i.e., W') of the minor axis (i.e., a axis) for a given dimension (i.e., D' or L') of the major axis (i.e., c axis), and thus smaller AR, as T increased, whereas this trend did not occur for plate crystals. The average number of branches in bullet rosettes was 5.50 ± 1.35 during three campaigns and 6.32 ± 1.34 (5.46 ± 1.34; 4.95 ± 1.01) during TWP-ICE (SPARTICUS; ISDAC). The AR of bullets increased with the number of branches in bullet rosettes. Most dimensions of crystals and ARs of columnar crystals measured during SPARTICUS were larger than those measured during TWP-ICE and ISDAC at −67 < T < -35 °C and at −40 < T < −15 °C, respectively. The relative occurrence of varying pristine habits depended strongly on cirrus type (i.e., anvil or non-anvil clouds), with plates especially occurring more frequently in anvils. Finally, the L– W relationships of columns derived using current data exhibited a strong dependence on temperature; similar relationships determined in previous studies were within the range of the current data.« less

Short-Term (<8 Weeks) High-Intensity Interval Training in Diseased Cohorts.

PubMed

Blackwell, James E M; Doleman, Brett; Herrod, Philip J J; Ricketts, Samuel; Phillips, Bethan E; Lund, Jonathan N; Williams, John P

2018-04-21

Exercise training regimes can lead to improvements in measures of cardiorespiratory fitness (CRF), improved general health, and reduced morbidity and overall mortality risk. High intensity interval training (HIIT) offers a time-efficient approach to improve CRF in healthy individuals, but the relative benefits of HIIT compared to traditional training methods are unknown in across different disease cohorts. This systematic review and meta-analysis compares CRF gains in randomised controlled trials of short-term (<8 weeks) HIIT vs. either no exercise control (CON) or moderate continuous exercise training (MCT) within diseased cohorts. Literature searches of the following databases were performed: MEDLINE, EMBASE, CINAHL, AMED, and PubMed (all from inception to 1st December 2017), with further searches of Clinicaltrials.gov and citations via Google Scholar. Primary outcomes were effect upon CRF variables; VO2peak and Anaerobic Threshold (AT). Thirty-nine studies met the inclusion criteria. HIIT resulted in a clinically significant increase in VO2peak compared with CON (mean difference (MD) 3.32 ml[BULLET OPERATOR]kg[BULLET OPERATOR]min; 95% CI 2.56 to 2.08). Overall HIIT provided added benefit to VO2peak over MCT (MD 0.79 ml[BULLET OPERATOR]kg[BULLET OPERATOR]min; 95% CI 0.20 to 1.39). The benefit of HIIT was most marked in patients with cardiovascular disease when compared to MCT (VO2peak (MD 1.66 ml[BULLET OPERATOR]kg[BULLET OPERATOR]min; 95% CI 0.60 to 2.73); AT (MD 1.61 ml[BULLET OPERATOR]kg[BULLET OPERATOR]min; 95% CI 0.33 to 2.90)). HIIT elicits improvements in objective measures of CRF within 8 weeks in diseased cohorts compared to no intervention. When compared to MCT, HIIT imparts statistically significant additional improvements in measures of CRF, with clinically important additional improvements in VO2peak in cardiovascular patients. Comparative efficacy of HIIT vs MCT combined with an often reduced time commitment may warrant HIIT's promotion as a viable clinical exercise intervention.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal.

Experimental duplication of the important physical evidence of the lapel bulge of the jacket worn by Governor Connally when bullet 399 went through him.

PubMed

Lattimer, J K; Laidlaw, A; Heneghan, P; Haubner, E J

1994-05-01

By duplicating the wound to the neck of President Kennedy, which caused bullet 399 to turn sideways, and having it then hit a Connally-type rib cage with shirt and jacket, we reproduced the right-sided bulge of the jacket worn by Connally, with lapel eversion, which is so significant in frame 224. The extensive damage to his shirtfront was from the hail of rib fragments and soft tissue, exactly as described with his own shirt. Our tumbling bullet then went on to fracture a radius and be recovered intact except that it was somewhat flattened and bent and had lead extruded from the rear, as did bullet 399. Fragments of this lead were scraped off on the ragged bone-ends of some of our fractured radiuses, just as with Governor Connally's radius. It is believed that this duplication of the jacket and lapel bulge of Governor Connally, which occurred dependably, when we reproduced the circumstances at Dallas, confirmed this very important detail in this technical demonstration of the findings in the shooting of President Kennedy and Governor Connally. The bulge and the lapel eversion of the jacket worn by Governor Connally, starting in Zapruder frame 224, does indeed establish, beyond any shadow of a doubt, the exact moment when bullet 399 went through him. The right arms of both men were seen to react simultaneously, immediately thereafter. It also permits us to establish that there was plenty of time (three and one-half seconds) between the first two shots (frames 160 to 224) and even more time (five seconds) between the last two shots (frames 224 to 313), for Oswald to reload, reacquire his target (the head of President Kennedy) plus two full seconds to lock onto it. If the bullet does not traverse the neck of President Kennedy, it does not cause Governor Connally's jacket and lapel to bulge. The lapel bulge is a very important bit of actual physical evidence in establishing the fact that one bullet hit both men and that Oswald had plenty of time to hit the President, first in the neck and then in the head. These experiments confirm the mechanism of the lapel bulge and the behavior of the bullet.

3. NORTHEAST SIDE, WITH A SINGLE BULLET GLASS WINDOW AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. NORTHEAST SIDE, WITH A SINGLE BULLET GLASS WINDOW AND SOUTHEAST REAR WITH ENTRY DOOR. - Edwards Air Force Base, South Base Sled Track, Observation Block House, Station "O" area, east end of Sled Track, Lancaster, Los Angeles County, CA

21 CFR 201.70 - Calcium labeling.

Code of Federal Regulations, 2013 CFR

2013-04-01

... stones [bullet] a calcium-restricted diet”. The warnings in §§ 201.64(c), 201.70(c), 201.71(c), and 201...., a calcium or sodium restricted diet. 1 See § 201.66(b)(4) of this chapter for definition of bullet...

21 CFR 201.70 - Calcium labeling.

Code of Federal Regulations, 2014 CFR

2014-04-01

... stones [bullet] a calcium-restricted diet”. The warnings in §§ 201.64(c), 201.70(c), 201.71(c), and 201...., a calcium or sodium restricted diet. 1 See § 201.66(b)(4) of this chapter for definition of bullet...

21 CFR 201.70 - Calcium labeling.

Code of Federal Regulations, 2012 CFR

2012-04-01

... stones [bullet] a calcium-restricted diet”. The warnings in §§ 201.64(c), 201.70(c), 201.71(c), and 201...., a calcium or sodium restricted diet. 1 See § 201.66(b)(4) of this chapter for definition of bullet...

Endovascular Approach for Management of Bullet Embolization to the Heart.

PubMed

Mojtahedi, Alireza; Contractor, Sohail; Kisza, Piotr S

2018-05-01

Bullet embolization to the right heart through the vasculature is seen infrequently in cases presenting with penetrating trauma. Patients with unstable hemodynamic status are managed operatively. For a patient with stable hemodynamic parameters, diagnostic evaluation such as computed tomography angiogram, echocardiogram, or angiography could be performed to select the best treatment option. Endovascular treatment is employed infrequently in these cases but can be a viable option for select patients. We present a case of a bullet embolus to the right ventricle treated successfully with endovascular approach and discuss the technical aspects of this approach.

Endoscopic Removal of a Bullet in Rosenmuller Fossa: Case Report

PubMed Central

Burks, Joshua D.; Glenn, Chad A.; Conner, Andrew K.; Bonney, Phillip A.; Sanclement, Jose A.; Sughrue, Michael E.

2016-01-01

Fractures of the anterior skull base may occur in gunshot victims and can result in traumatic cerebrospinal fluid (CSF) leak. Less commonly, CSF leaks occur days or even weeks after the trauma occurred. Here, we present the case of a 21-year-old man with a delayed-onset, traumatic CSF leak secondary to a missile injury that left a bullet fragment in the Rosenmuller fossa. The patient was treated successfully with endoscopic, endonasal extraction of the bullet, and repair with a nasal septal flap. Foreign bodies lodged in Rosenmuller fossa can be successfully treated with endoscopic skull base surgery. PMID:27330924

Derivation of Physical and Optical Properties of Midlatitude Cirrus Ice Crystals for a Size-Resolved Cloud Microphysics Model

NASA Technical Reports Server (NTRS)

Fridlind, Ann M.; Atlas, Rachel; Van Diedenhoven, Bastiaan; Um, Junshik; McFarquhar, Greg M.; Ackerman, Andrew S.; Moyer, Elisabeth J.; Lawson, R. Paul

2016-01-01

Single-crystal images collected in mid-latitude cirrus are analyzed to provide internally consistent ice physical and optical properties for a size-resolved cloud microphysics model, including single-particle mass, projected area, fall speed, capacitance, single-scattering albedo, and asymmetry parameter. Using measurements gathered during two flights through a widespread synoptic cirrus shield, bullet rosettes are found to be the dominant identifiable habit among ice crystals with maximum dimension (Dmax) greater than 100µm. Properties are therefore first derived for bullet rosettes based on measurements of arm lengths and widths, then for aggregates of bullet rosettes and for unclassified (irregular) crystals. Derived bullet rosette masses are substantially greater than reported in existing literature, whereas measured projected areas are similar or lesser, resulting in factors of 1.5-2 greater fall speeds, and, in the limit of large Dmax, near-infrared single-scattering albedo and asymmetry parameter (g) greater by approx. 0.2 and 0.05, respectively. A model that includes commonly imaged side plane growth on bullet rosettes exhibits relatively little difference in microphysical and optical properties aside from approx. 0:05 increase in mid-visible g primarily attributable to plate aspect ratio. In parcel simulations, ice size distribution, and g are sensitive to assumed ice properties.

Blood Back Spatter Caused by a Blunt Bullet Gunshot: Theory and Experiments

NASA Astrophysics Data System (ADS)

Comiskey, Patrick; Yarin, Alexander; Kim, Sungu; Attinger, Daniel

A theoretical model describing the blood back spatter pattern resulting from a blunt bullet gunshot is proposed and compared to experimental data. It is shown that the blunt bullet impact results in blood accelerating towards air opposite of the bullet motion creating a situation for the Rayleigh-Taylor instability which determines droplet sizes and initial velocities. Then, drop trajectories can be predicted accounting for all forces involved: air drag and gravity forces, as well as for the collective effect of drop-drop interaction through air which diminishes the drag force on drops moving in the wake of the others. Experimental data was acquired by shooting a blunt bullet into a porous substrate impregnated with swine blood and the spatter pattern was collected on a vertical surface located between the target and the shooter. The spatter pattern was analyzed for the number of droplets, the area of blood stains, total stain area, and location. Comparisons with the theoretical results reveal satisfactory agreement. The theory also predicts the impact angle at the collection surface, the Weber number corresponding to the drop impact onto the collection surface, and the stain ellipticity. Support of this work by the US National Institute of Justice (award NIJ 2014-DN-BX-K036) is greatly appreciated.

A new model for the characterization of infection risk in gunshot injuries:Technology, principal consideration and clinical implementation

PubMed Central

2011-01-01

Introduction The extent of wound contamination in gunshot injuries is still a topic of controversial debate. The purpose of the present study is to develop a model that illustrates the contamination of wounds with exogenous particles along the bullet path. Material and methods To simulate bacteria, radio-opaque barium titanate (3-6 μm in diameter) was atomized in a dust chamber. Full metal jacket or soft point bullets caliber .222 (n = 12, v0 = 1096 m/s) were fired through the chamber into a gelatin block directly behind it. After that, the gelatin block underwent multi-slice CT in order to analyze the permanent and temporary wound cavity. Results The permanent cavity caused by both types of projectiles showed deposits of barium titanate distributed over the entire bullet path. Full metal jacket bullets left only few traces of barium titanate in the temporary cavity. In contrast, the soft point bullets disintegrated completely, and barium titanate covered the entire wound cavity. Discussion Deep penetration of potential exogenous bacteria can be simulated easily and reproducibly with barium titanate particles shot into a gelatin block. Additionally, this procedure permits conclusions to be drawn about the distribution of possible contaminants and thus can yield essential findings in terms of necessary therapeutic procedures. PMID:22032229

Enhanced peculiar velocities in brane-induced gravity

NASA Astrophysics Data System (ADS)

Wyman, Mark; Khoury, Justin

2010-08-01

The mounting evidence for anomalously large peculiar velocities in our Universe presents a challenge for the ΛCDM paradigm. The recent estimates of the large-scale bulk flow by Watkins et al. are inconsistent at the nearly 3σ level with ΛCDM predictions. Meanwhile, Lee and Komatsu have recently estimated that the occurrence of high-velocity merging systems such as the bullet cluster (1E0657-57) is unlikely at a 6.5-5.8σ level, with an estimated probability between 3.3×10-11 and 3.6×10-9 in ΛCDM cosmology. We show that these anomalies are alleviated in a broad class of infrared-modifed gravity theories, called brane-induced gravity, in which gravity becomes higher-dimensional at ultralarge distances. These theories include additional scalar forces that enhance gravitational attraction and therefore speed up structure formation at late times and on sufficiently large scales. The peculiar velocities are enhanced by 24-34% compared to standard gravity, with the maximal enhancement nearly consistent at the 2σ level with bulk flow observations. The occurrence of the bullet cluster in these theories is ≈104 times more probable than in ΛCDM cosmology.

Enhanced peculiar velocities in brane-induced gravity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wyman, Mark; Khoury, Justin

The mounting evidence for anomalously large peculiar velocities in our Universe presents a challenge for the {Lambda}CDM paradigm. The recent estimates of the large-scale bulk flow by Watkins et al. are inconsistent at the nearly 3{sigma} level with {Lambda}CDM predictions. Meanwhile, Lee and Komatsu have recently estimated that the occurrence of high-velocity merging systems such as the bullet cluster (1E0657-57) is unlikely at a 6.5-5.8{sigma} level, with an estimated probability between 3.3x10{sup -11} and 3.6x10{sup -9} in {Lambda}CDM cosmology. We show that these anomalies are alleviated in a broad class of infrared-modifed gravity theories, called brane-induced gravity, in which gravitymore » becomes higher-dimensional at ultralarge distances. These theories include additional scalar forces that enhance gravitational attraction and therefore speed up structure formation at late times and on sufficiently large scales. The peculiar velocities are enhanced by 24-34% compared to standard gravity, with the maximal enhancement nearly consistent at the 2{sigma} level with bulk flow observations. The occurrence of the bullet cluster in these theories is {approx_equal}10{sup 4} times more probable than in {Lambda}CDM cosmology.« less

Numerical study of the influence of dielectric tube on propagation of atmospheric pressure plasma jet based on coplanar dielectric barrier discharge

NASA Astrophysics Data System (ADS)

Haixin, HU; Feng, HE; Ping, ZHU; Jiting, OUYANG

2018-05-01

A 2D fluid model was employed to simulate the influence of dielectric on the propagation of atmospheric pressure helium plasma jet based on coplanar dielectric barrier discharge (DBD). The spatio-temporal distributions of electron density, ionization rate, electrical field, spatial charge and the spatial structure were obtained for different dielectric tubes that limit the helium flow. The results show that the change of the relative permittivity of the dielectric tube where the plasma jet travels inside has no influence on the formation of DBD itself, but has great impact on the jet propagation. The velocity of the plasma jet changes drastically when the jet passes from a tube of higher permittivity to one of lower permittivity, resulting in an increase in jet length, ionization rate and electric field, as well as a change in the distribution of space charges and discharge states. The radius of the dielectric tube has a great influence on the ring-shaped or solid bullet structure. These results can well explain the behavior of the plasma jet from the dielectric tube into the ambient air and the hollow bullet in experiments.

The origin of X-ray protrusions in the VELA supernova remnant

NASA Astrophysics Data System (ADS)

Gvaramadze, V. V.

We propose a possible explanation for the formation of X-ray protrusions in the Vela SNR, recently observed by the ROSAT X-ray telescope (Aschenbach, Egger & Trumper, 1995, Nature, 373, 587). We suggest that the highly asymmetric shape of the Vela SNR is the result of the interaction of the SN ejecta/shock with the pre-existing wind-driven shell blown-up in a medium with a density gradient (perpendicular to the Galactic plane). The interaction of the radiative (north-east) half of the remnant, approaching towards the Galactic plane, with dense obstacles (cloudlets or wind zones of stars) can produce X-ray "bullets" radially moving beyond the SNR boundary. These "bullets" originate due to the cooling and condensation of a gas swept-up by converging conical shocks arising behind the dense obstacles overtaken by the SN shock. The X-ray protrusions observed in the western part of the remnant might be explained by outflows of hot gas of the SNR's interior emanating through the gaps in the shell. The origin of the X-ray "jet" (Markwardt & Ogelman, 1995, Nature, 375, 40) in the central part of the Vela SNR is also discussed.

21 CFR 344.52 - Labeling of ear drying aid drug products.

Code of Federal Regulations, 2012 CFR

2012-04-01

..., and Cosmetic Act (the act) relating to misbranding and the prohibition in section 301(d) of the act... in the ear [bullet] had ear surgery [bullet] dizziness.” (4) “Stop use and ask a doctor if [in bold...

21 CFR 344.52 - Labeling of ear drying aid drug products.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., and Cosmetic Act (the act) relating to misbranding and the prohibition in section 301(d) of the act... in the ear [bullet] had ear surgery [bullet] dizziness.” (4) “Stop use and ask a doctor if [in bold...

21 CFR 344.52 - Labeling of ear drying aid drug products.

Code of Federal Regulations, 2013 CFR

2013-04-01

..., and Cosmetic Act (the act) relating to misbranding and the prohibition in section 301(d) of the act... in the ear [bullet] had ear surgery [bullet] dizziness.” (4) “Stop use and ask a doctor if [in bold...

High-Speed Bullet Ejections during the AGB to Planetary Nebula Transition: A Study of the Carbon Star V Hydrae

NASA Astrophysics Data System (ADS)

Sahai, Raghvendra

2017-08-01

The carbon star V Hya is experiencing heavy mass loss as it undergoes the transition from an AGB star to a planetary nebula (PN). This is possibly the earliest object known in this brief phase, which is so short that few nearby stars are likely to be caught in the act. Molecular observations reveal that a bipolar nebula has been established even at this early stage. Using STIS, we obtained high spatial-resolution long-slit optical spectra of V Hya spanning 3 epochs spaced apart by a year during each of two periods (2002-2004, 2011-2013). These data reveal high-velocity emission in [SII] lines from compact blobs located both on- and off-source, with the ejection axis executing a flip-flop, both in, and perpendicular to, the sky-plane. We have proposed a detailed model in which V Hya ejects high-speed (200-250 km/s) bullets once every 8.5 yr associated with periastron passage of a binary companion in an eccentric orbit with an 8.5 yr period. We suggest that the jet driver is an accretion disk (produced by gravitational capture of material from the primary) that is warped and precessing. Our model predicts the locations of previously ejected bullets in V Hya and future epochs at which new bullets will emerge. We now propose new STIS observations of these remarkable bullet ejections over two new epochs well separated from previous ones, to robustly test our model. The proposed observations will provide us with an unprecedented opportunity to look on as V Hya's circumstellar envelope is sculpted by these bullets. Our study will help solve the long-standing puzzle of how the spherical mass-loss envelopes of AGB stars evolve into bipolar and multipolar PNe.

7. BULLET GLASS OBSERVATION WINDOW AT GROUND LEVEL ON WEST ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

7. BULLET GLASS OBSERVATION WINDOW AT GROUND LEVEL ON WEST REAR. - Edwards Air Force Base, South Base Sled Track, Firing & Control Blockhouse for 10,000-foot Track, South of Sled Track at midpoint of 20,000-foot track, Lancaster, Los Angeles County, CA

Energy loss and impact of various stunning devices used for the slaughtering of water buffaloes.

PubMed

Glardon, Matthieu; Schwenk, Barbara K; Riva, Fabiano; von Holzen, Adrian; Ross, Steffen G; Kneubuehl, Beat P; Stoffel, Michael H

2018-01-01

Stock management of the Swiss water buffalo livestock results in the slaughtering of about 350 animals per year. As the stunning of water buffaloes still is an unresolved issue, we investigated the terminal ballistics of currently used perforating stunning devices. Cartridge fired captive bolt devices, handguns and a bullet casing gun were tested in a shooting steep by firing on bisected heads, forehead plates and soap blocks. Energy loss of captive bolts confirmed their inadequacy when used for heavy water buffaloes, notably adult males. As for the free projectiles, ballistics revealed that beyond the impact energy, bullet deformation has a strong impact on the outcome. Light 9mm Luger or .38 Spl bullets as well as large deformable .44 Rem. Magnum bullets should be avoided in favor of heavier .357 Magnum deformation ammunition. These data have been translated into the development of a new stunning device for water buffaloes meeting both animal welfare and occupational safety requirements. Copyright © 2017 Elsevier Ltd. All rights reserved.

Cavitation induced by high speed impact of a solid surface on a liquid jet

NASA Astrophysics Data System (ADS)

Farhat, Mohamed; Tinguely, Marc; Rouvinez, Mathieu

2009-11-01

A solid surface may suffer from severe erosion if it impacts a liquid jet at high speed. The physics behind the erosion process remains unclear. In the present study, we have investigated the impact of a gun bullet on a laminar water jet with the help of a high speed camera. The bullet has a flat front and 11 mm diameter, which is half of jet diameter. The impact speed was varied between 200 and 500 ms-1. Immediately after the impact, a systematic shock wave and high speed jetting were observed. As the compression waves reflect on the jet boundary, a spectacular number of vapour cavities are generated within the jet. Depending on the bullet velocity, these cavities may grow and collapse violently on the bullet surface with a risk of cavitation erosion. We strongly believe that this transient cavitation is the main cause of erosion observed in many industrial applications such as Pelton turbines.

Firearm suicide committed using an unusual combination of tandem missiles: a bullet, a nail, and a screw.

PubMed

Mihailovic, Zoran; Savic, Slobodan; Atanasijevic, Tatjana

2007-09-01

An interesting case of firearm suicide carried out using an unusual type of handmade weapon and a peculiar combination of tandem missiles is presented. A nail and a screw were placed in the rifle barrel ahead of a bullet, and all 3 were simultaneously discharged. The inflicted injury began with 1 common channel, which later split in 2 separate channels, both directed backwards and upwards; one was caused by the screw, ending in the epistropheal body, and the other, caused by the bullet and the nail, penetrated into the cranial cavity, where it bifurcated in 2 branches, one from the bullet, ending in the cerebellar tissue, and the other from the nail, penetrated through the brain stem. The established site of the entrance suicidal wound, the appearance of the weapon, and the unusual missiles are discussed with regard to the available references dealing with different types of nail injuries to the head.

3D-MSCT imaging of bullet trajectory in 3D crime scene reconstruction: two case reports.

PubMed

Colard, T; Delannoy, Y; Bresson, F; Marechal, C; Raul, J S; Hedouin, V

2013-11-01

Postmortem investigations are increasingly assisted by three-dimensional multi-slice computed tomography (3D-MSCT) and have become more available to forensic pathologists over the past 20years. In cases of ballistic wounds, 3D-MSCT can provide an accurate description of the bullet location, bone fractures and, more interestingly, a clear visual of the intracorporeal trajectory (bullet track). These forensic medical examinations can be combined with tridimensional bullet trajectory reconstructions created by forensic ballistic experts. These case reports present the implementation of tridimensional methods and the results of 3D crime scene reconstruction in two cases. The authors highlight the value of collaborations between police forensic experts and forensic medicine institutes through the incorporation of 3D-MSCT data in a crime scene reconstruction, which is of great interest in forensic science as a clear visual communication tool between experts and the court. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Human resources for health policies: a critical component in health policies.

PubMed

Dussault, Gilles; Dubois, Carl-Ardy

2003-04-14

In the last few years, increasing attention has been paid to the development of health policies. But side by side with the presumed benefits of policy, many analysts share the opinion that a major drawback of health policies is their failure to make room for issues of human resources. Current approaches in human resources suggest a number of weaknesses: a reactive, ad hoc attitude towards problems of human resources; dispersal of accountability within human resources management (HRM); a limited notion of personnel administration that fails to encompass all aspects of HRM; and finally the short-term perspective of HRM.There are three broad arguments for modernizing the ways in which human resources for health are managed:bullet; the central role of the workforce in the health sector;bullet; the various challenges thrown up by health system reforms;bullet; the need to anticipate the effect on the health workforce (and consequently on service provision) arising from various macroscopic social trends impinging on health systems.The absence of appropriate human resources policies is responsible, in many countries, for a chronic imbalance with multifaceted effects on the health workforce: quantitative mismatch, qualitative disparity, unequal distribution and a lack of coordination between HRM actions and health policy needs.Four proposals have been put forward to modernize how the policy process is conducted in the development of human resources for health (HRH):bullet; to move beyond the traditional approach of personnel administration to a more global concept of HRM;bullet; to give more weight to the integrated, interdependent and systemic nature of the different components of HRM when preparing and implementing policy;bullet; to foster a more proactive attitude among human resources (HR) policy-makers and managers;bullet; to promote the full commitment of all professionals and sectors in all phases of the process.The development of explicit human resources policies is a crucial link in health policies and is needed both to address the imbalances of the health workforce and to foster implementation of the health services reforms.

Facial fractures caused by less-lethal rubber bullet weapons: case series report and literature review.

PubMed

Amaral, Marcio Bruno Figueiredo; Bueno, Sebastião Cristian; Abdala, Icaro Buchholz; da Silveira, Roger Lanes

2017-09-01

The present study aims to describe three cases of patients inflicted by rubber bullets with severe facial fractures. In addition, a review of English-language literature involving facial fractures by rubber bullets from 1975 to 2016 was performed. This current study demonstrated that the use of the LLRBW is unsafety even when applied by police enforcements exclusively. Management of facial fractures caused by LLRBW is done in a usual manner with closed or open reduction associated with bone mini-plates or reconstruction plates when indicated. Special initial wound care should be done to avoid secondary infection and additional procedures.

Missile pulmonary embolus secondary to abdominal gunshot wound.

PubMed

Mctyre, Emory; McGill, Lee; Miller, Nessa

2012-01-01

Missile pulmonary emboli are rare sequelae of traumatic entry of projectile missiles-generally bullets or bullet fragments-in which access to the systemic venous circulation is established by the missile, making it possible for the missile to migrate to the pulmonary arteries. In the case introduced here, a 24-year-old male presented to the ER with a gunshot wound to the abdomen. In the early course of his care, it was determined that he had suffered a missile pulmonary embolus secondary to a large fragment of a bullet penetrating the IVC. Despite the large perfusion defect created by this missile embolus, the patient recovered uneventfully without embolectomy.

A Pilot Study of Simple Interventions to Improve Informed Consent in Clinical Research: Feasibility, Approach, and Results

PubMed Central

Kass, Nancy; Taylor, Holly; Ali, Joseph; Hallez, Kristina; Chaisson, Lelia

2014-01-01

Background Informed consent is intended to ensure that individuals understand the purpose, risks, and benefits of research studies, and then can decide, voluntarily, whether to enroll. However, research suggests that consent procedures do not always lead to adequate participant understanding and may be longer and more complex than necessary. Studies also suggest some consent interventions, including enhanced consent forms and extended discussions with patients, increase understanding, yet methodologic challenges have been raised in studying consent in actual trial settings. This study aimed to examine the feasibility of testing two consent interventions in actual studies and also to measure effectiveness of interventions in improving understanding of trials. Methods Participants enrolling in any of eight ongoing clinical trials (“collaborating studies”) were, for the purposes of this study, sequentially assigned to one of three study arms involving different informed consent procedures (one control and two intervention). Control participants received standard consent form and processes. Participants in the 1st intervention arm received a bulleted fact-sheet providing simple summaries of all study components in addition to the standard consent form. Participants in the 2nd intervention arm received the bulleted fact-sheet and standard consent materials and then also engaged with a member of the collaborating study staff in a feedback Q&A session. Following consent procedures, we administered closed and open ended questions to assess patient understanding and we assessed literacy level. Descriptive statistics, Wilcoxon-Mann-Whitney and Kruskal-Wallis tests were generated to assess correlations; regression analysis determined predictors of patient understanding. Results 144 participants enrolled. Using regression analysis participants receiving the 2nd intervention, which included a standard consent form, bulleted fact sheet and structured question and answer session with a study staff member, had open-ended question scores that were 7.6 percentage points higher (p=.02) than participants who received the control arm (standard consent only), although unadjusted comparisons did not reach statistical significance. Eleven clinical trial investigators agreed to participate and 8 trials provided sufficient data to be included, thereby demonstrating feasibility of consent research in actual settings. Conclusions Our study supports the hypothesis that patients receiving both bulleted fact sheets and a question and answer session have higher understanding compared to patients receiving standard consent form and procedures alone. Fact sheets and short structured dialog are quick to administer and easy to replicate across studies and should be tested in larger samples for effectiveness. PMID:25475879

Actuated Recoil Absorbing Mounting System for use with an Underwater Gun

DTIC Science & Technology

1998-03-31

fire supercavitating bullets, requires that 20 the new projectile launchers be tested. The firing of projectile 21 launchers involving a high...of projectile launcher 12 includes an underwater gun 15 that fires supercavitating bullets underwater and has a high 16 discharge energy. However

Making It Stick

ERIC Educational Resources Information Center

Ewers, Justin

2009-01-01

It seems to happen every day. A meeting is called to outline a new strategy or sales plan. Down go the lights and up goes the PowerPoint. Strange phrases appear--"unlocking shareholder value," "technology-focused innovation," "maximizing utility." Lists of numbers come and go. Bullet point by bullet point, the…

CALL FOR PAPERS: Progress in Supersymmetric Quantum Mechanics

NASA Astrophysics Data System (ADS)

2003-12-01

This is a call for contributions to a special issue of Journal of Physics A: Mathematical and General dedicated to the subject of Supersymmetric Quantum Mechanics as featured in the International Conference in Supersymmetric Quantum Mechanics (PSQM03), 15--19 July 2003, University of Valladolid, Spain (http://metodos.fam.cie.uva.es/~susy_qm_03/). Participants at that meeting, as well as other researchers working in this area or in related fields, are invited to submit a research paper to this issue. The Editorial Board has invited Irina Areféva, David J Fernández, Véronique Hussin, Javier Negro, Luis M Nieto and Boris F Samsonov to act as Guest Editors for the special issue. Their criteria for acceptance of contributions are as follows: bullet The subject of the paper should be in the general area covered by the PSQM03 conference. bullet Contributions will be refereed and processed according to the usual mechanisms of the journal. bullet Papers should present substantial new results (they should not be simply reviews of authors' own work that is already published elsewhere). The guidelines for the preparation of contributions are as follows: bullet DEADLINE for submission of contributions is 15 January 2004. This deadline will allow the special issue to appear in approximately September 2004. bullet There is a page limit of 15 pages per research contribution. Further advice on publishing your work in Journal of Physics A: Mathematical and General may be found at www.iop.org/Journals/jphysa. bullet Contributions to the special issue should if possible be submitted electronically at www.iop.org/Journals/jphysa or by e-mail to jphysa@iop.org, quoting `JPhysA special issue --- PSQM03'. Submissions should ideally be in either standard LaTeX form or Microsoft Word. Please see the web site for further information on electronic submissions. bullet Authors unable to submit by email may send hard copy contributions to: Journal of Physics A, Institute of Physics Publishing, Dirac House, Temple Back, Bristol BS1 6BE, UK, enclosing the electronic code if available and mentioning `PSQM03 special issue'. bullet All contributions should be accompanied by a readme file or covering letter giving the postal and e-mail addresses for correspondence. Any subsequent change of address should be notified to the publishing office. The corresponding author of each contribution will receive a complimentary copy of the issue. Irina Areféva, David J Fernández, Véronique Hussin, Javier Negro, Luis M Nieto and Boris F Samsonov Guest Editors

Demonstrating the effect of forensic firearm countermeasures: Bullet characteristics generated due to barrel modifications.

PubMed

O'Keeffe, C; Champion, S; Allsop, D

2015-12-01

Forensic awareness and the declining availability of firearms have resulted in an increase in the use of modified and re-activated firearms in crime. Although some modifications are undertaken to simply acquire a functioning firearm, others are perpetrated as a direct forensic countermeasure to prevent the association between a firearm and a crime. This article describes the effects of these modifications on bullet striation patterns imparted from the barrel to a fired bullet. The key results indicated that the investigated modifications display assessable characteristics. The use of an oversized barrel imparted striations consistent with firing with the absence of typical rifling. Subsequent or consecutively fired bullets possessed striation variations, with the first showing the least evidence of striations. The application of a choke resulted in more obvious bullet elongation compared to a smoothbore barrel. The restriction caused merging of lands and groves of the imparted rifling and obscured their usual definition. Effects of breech adaption were also characterised by observing the buckling and enlargement of the cartridge case. This deformity of the cartridge case was most evident when the barrel pressure increased due to the presence of the choke. From this study it was evident that unique characteristic impressions associated with different modifications most commonly found in criminal investigations can be utilised by a forensic expert and impart significant intelligence to an investigation. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Science Fair Projects. LC Science Tracer Bullet. TB 07-6

ERIC Educational Resources Information Center

Howland, Joyce, Comp.

2007-01-01

Selected sources in this bibliography provide guidance to students, parents, and teachers throughout the process of planning, developing, implementing and competing in science fair activities. Sources range in suitability from elementary to high school levels. This guide updates "Library of Congress Science Tracer Bullet" 01-4. More specialized…

Ignition potential of rifle bullets

Treesearch

Trevor Maynard; Mark Finney; Sara McAllister; Ian Grob

2013-01-01

In January 2013, the U.S. Department of Agriculture Forest Service's Rocky Mountain Research Station and National Technology and Development Centers performed experiments to evaluate the potential for rifle bullets to ignite organic matter after striking hard surfaces. Outdoor target shooting is often suspected as a wildfire cause, but investigators currently do...

Firearm equipped with live round inhibiting means and method of making same

DOEpatents

Baehr, D.G.

1990-11-13

A firearm is disclosed having live round inhibiting means mounted in the barrel of the firearm which permits a blank cartridge to be loaded into a firearm and fired while preventing the loading and firing of a live round. The live round inhibiting means comprise shaft means mounted in the barrel of the firearm and which extends a sufficient length into the barrel at a point just beyond the chamber portion of the firearm to engage the bullet portion of a live round to prevent it from properly chambering, while permitting a blank cartridge to be loaded into the firearm and fired without engaging the live round-inhibiting shaft means. 9 figs.

Firearm equipped with live round inhibiting means and method of making same

DOEpatents

Baehr, Donald G.

1990-01-01

A firearm is disclosed having live round inhibiting means mounted in the barrel of the firearm which permits a blank cartridge to be loaded into a firearm and fired while preventing the loading and firing of a live round. The live round inhibiting means comprise shaft means mounted in the barrel of the firearm and which extends a sufficient length into the barrel at a point just beyond the chamber portion of the firearm to engage the bullet portion of a live round to prevent it from properly chambering, while permitting a blank cartridge to be loaded into the firearm and fired without engaging the live round-inhibiting shaft means.

Energy staggering in superdeformed bands in {sup 131}Ce, {sup 132}Ce, and {sup 133}Ce

DOE Office of Scientific and Technical Information (OSTI.GOV)

Semple, A.T.; Nolan, P.J.; Beausang, C.W.

1996-05-01

Superdeformed bands observed in {sup 131}Ce, {sup 132}Ce, and {sup 133}Ce have sequences of {gamma}-ray transition energies that exhibit a {Delta}{ital I}=2 staggering. This staggering has different characteristics to that seen in previously known cases in other mass regions. The energy staggering starts at low rotational frequency ({sq_bullet}{omega}=3 MeV for {sup 131}Ce) at a magnitude of {approximately}{plus_minus}0.3 keV, dies away to zero at intermediate frequency ({sq_bullet}{omega}=0.6{minus}0.7 MeV), and reappears at higher frequencies ({sq_bullet}{omega}{approximately}0.7 MeV). {copyright} {ital 1996 The American Physical Society.}

49 CFR Appendix A to Part 223 - Certification of Glazing Materials

Code of Federal Regulations, 2010 CFR

2010-10-01

...-ups, test measuring devices, and test procedures were performed by qualified personnel using... following tests: (i) Ballistic Impact in which a standard 22 caliber long rifle lead bullet of 40 grains in... Impact in which a standard 22 caliber long rifle lead bullet of 40 grains in weight impacts at a minimum...

Persistence and Change in Social Media

ERIC Educational Resources Information Center

Hogan, Bernie; Quan-Haase, Anabel

2010-01-01

In "Star Trek," Scotty suggests that Transwarp beaming is "like trying to hit a bullet with a smaller bullet, whilst wearing a blindfold, riding a horse." The study of social media faces similar challenges because new tools are developed at a rapid pace and existing tools are constantly being updated with new features, policies, and applications.…

Increasing Small Arms Lethality in Afghanistan Taking Back the Infantry Half-Kilometer

DTIC Science & Technology

2009-05-21

John A. Malinowski , and Robert E. Bowen. "Bullet Fragmentation: A Major Cause of Tissue Disruption." JTrauma, 1984: 35-39. 67 Initial muzzle...Fackler, Martin L, M.D., M.A. John S. Surinchak, B.S. John A. Malinowski , and Robert E. Bowen. "Bullet Fragmentation: A Major Cause of Tissue

Undetected penetrating bladder injuries presenting as a spontaneously expulsed bullet during voiding: a rare entity and review of the literature.

PubMed

Kuy, SreyRam; Somberg, Lewis B; Paul, Jasmeet; Brown, Nathaniel; Saving, Allegra; Codner, Panna A

2013-09-01

Patients presenting with a penetrating missile lodged in the pelvis are at risk for having a urinary tract injury. Once in the bladder, the missile can become impacted in the urethra, causing retention that requires extraction. Rarely, the missile can be expulsed spontaneously through the urethra. To describe the world literature regarding undetected penetrating bladder injuries presenting as spontaneously voided bullets and to contribute an additional case to the literature. We present a case report of a 37-year-old man who sustained a gunshot wound to the right buttock, with an undetected urinary system injury and subsequent spontaneous voiding of a bullet. There have been <10 cases reported in the literature of spontaneously expulsed bullets from the urethra, all of which were undetected injuries on initial presentation. Physicians should be aware of the potential for undetected urinary tract injuries in patients with penetrating missiles to the pelvis and understand the appropriate evaluation and management strategies for these injuries. Copyright © 2013 Elsevier Inc. All rights reserved.

Impacted thoracic foreign bodies after penetrating chest trauma.

PubMed

Sersar, Sameh I; Albohiri, Khalid A; Abdelmohty, Hysam

2016-10-01

Retained foreign bodies in the chest may include shell fragments, bullets, shrapnel, pieces of clothing, bones, and rib fragments. The risks of removal of foreign bodies must be weighed against the complications of leaving them inside the chest. We treated 90 cases of retained intrathoracic foreign bodies in patients admitted to 3 tertiary centers in Saudi Arabia between March 2015 and March 2016. Sixty patients were injured by shrapnel, 26 had one or more bullets, 3 had broken rib fragments, and one had a metal screw. The chest wall was site of impaction in 48 cases, the lungs in 24, pleura in 14, and mediastinum in 4. Removal of the retained foreign body was carried out in 12 patients only: bullets in 9 cases, bone fragments in 2, and a metal screw in one. The predictors for removal were bullets, female sex, and mediastinal position with bilateral chest injury, especially with fracture ribs. Retained intrathoracic foreign bodies due to penetrating chest trauma are treated mainly conservatively unless there is another indication for chest exploration. © The Author(s) 2016.

Craniomaxillofacial falling bullet injuries and management.

PubMed

Shuker, Sabri T; Sadda, Raid

2010-07-01

The purpose of this study was to bring attention to craniocerebral maxillofacial perforating/penetrating injuries due to AK-47 Kalashnikov falling bullets (FBs); these dangerous injuries to both civilians and soldiers are rare. A review of the literature shows no reports on AK-47 FBs leading to double craniocerebral perforation and settling into the maxillofacial region. The number of victims, the AK-47's availability, the associated morbidity and mortality rates, and the rarity of cases prompted this article. The treatment of injuries to the craniocerebral facial clinical profile due to FBs is challenging, and an understanding of the neurosurgical and maxillofacial management of these low-velocity FB injuries is required. We treated 11 cases due to AK-47 rifle FBs and 1 due to anti-aircraft Dashka 12.7-mm FBs. Craniocerebral facial injuries were treated and lodged bullets removed from different challenging locations in the base of the skull, without increasing morbidity and with avoidance of unnecessary surgical trauma to the affected area by the bullets. The required identification of such injuries can be difficult, and the removal of the lodged bullet to prevent secondary complications and reduce the chance of secondary infection can be graver than in other parts of the body. AK-47 FBs are a major public health concern internationally and require serious attention in terms of protection and management for civilians and soldiers in uniform. Copyright 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Robust human body model injury prediction in simulated side impact crashes.

PubMed

Golman, Adam J; Danelson, Kerry A; Stitzel, Joel D

2016-01-01

This study developed a parametric methodology to robustly predict occupant injuries sustained in real-world crashes using a finite element (FE) human body model (HBM). One hundred and twenty near-side impact motor vehicle crashes were simulated over a range of parameters using a Toyota RAV4 (bullet vehicle), Ford Taurus (struck vehicle) FE models and a validated human body model (HBM) Total HUman Model for Safety (THUMS). Three bullet vehicle crash parameters (speed, location and angle) and two occupant parameters (seat position and age) were varied using a Latin hypercube design of Experiments. Four injury metrics (head injury criterion, half deflection, thoracic trauma index and pelvic force) were used to calculate injury risk. Rib fracture prediction and lung strain metrics were also analysed. As hypothesized, bullet speed had the greatest effect on each injury measure. Injury risk was reduced when bullet location was further from the B-pillar or when the bullet angle was more oblique. Age had strong correlation to rib fractures frequency and lung strain severity. The injuries from a real-world crash were predicted using two different methods by (1) subsampling the injury predictors from the 12 best crush profile matching simulations and (2) using regression models. Both injury prediction methods successfully predicted the case occupant's low risk for pelvic injury, high risk for thoracic injury, rib fractures and high lung strains with tight confidence intervals. This parametric methodology was successfully used to explore crash parameter interactions and to robustly predict real-world injuries.

Closure Report for Corrective Action Unit 516: Septic Systems and Discharge Points

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Restoration

Corrective Action Unit (CAU) 516 is located in Areas 3, 6, and 22 of the Nevada Test Site. CAU 516 is listed in the Federal Facility Agreement and Consent Order of 1996 as Septic Systems and Discharge Points, and is comprised of six Corrective Action Sites (CASs): {sm_bullet} CAS 03-59-01, Bldg 3C-36 Septic System {sm_bullet} CAS 03-59-02, Bldg 3C-45 Septic System {sm_bullet} CAS 06-51-01, Sump and Piping {sm_bullet} CAS 06-51-02, Clay Pipe and Debris {sm_bullet} CAS 06-51-03, Clean Out Box and Piping {sm_bullet} CAS 22-19-04, Vehicle Decontamination Area The Nevada Division of Environmental Protection (NDEP)-approved corrective action alternative for CASsmore » 06-51-02 and 22-19-04 is no further action. The NDEP-approved corrective action alternative for CASs 03-59-01, 03-59-02, 06-51-01, and 06-51-03 is clean closure. Closure activities included removing and disposing of total petroleum hydrocarbon (TPH)-impacted septic tank contents, septic tanks, distribution/clean out boxes, and piping. CAU 516 was closed in accordance with the NDEP-approved CAU 516 Corrective Action Plan (CAP). The closure activities specified in the CAP were based on the recommendations presented in the CAU 516 Corrective Action Decision Document (U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, 2004). This Closure Report documents CAU 516 closure activities. During closure activities, approximately 186 tons of hydrocarbon waste in the form of TPH-impacted soil and debris, as well as 89 tons of construction debris, were generated and managed and disposed of appropriately. Waste minimization techniques, such as field screening of soil samples and the utilization of laboratory analysis to characterize and classify waste streams, were employed during the performance of closure work.« less

Lead Bullet Fragments in Venison from Rifle-Killed Deer: Potential for Human Dietary Exposure

PubMed Central

Hunt, W. Grainger; Watson, Richard T.; Oaks, J. Lindsay; Parish, Chris N.; Burnham, Kurt K.; Tucker, Russell L.; Belthoff, James R.; Hart, Garret

2009-01-01

Human consumers of wildlife killed with lead ammunition may be exposed to health risks associated with lead ingestion. This hypothesis is based on published studies showing elevated blood lead concentrations in subsistence hunter populations, retention of ammunition residues in the tissues of hunter-killed animals, and systemic, cognitive, and behavioral disorders associated with human lead body burdens once considered safe. Our objective was to determine the incidence and bioavailability of lead bullet fragments in hunter-killed venison, a widely-eaten food among hunters and their families. We radiographed 30 eviscerated carcasses of White-tailed Deer (Odocoileus virginianus) shot by hunters with standard lead-core, copper-jacketed bullets under normal hunting conditions. All carcasses showed metal fragments (geometric mean = 136 fragments, range = 15–409) and widespread fragment dispersion. We took each carcass to a separate meat processor and fluoroscopically scanned the resulting meat packages; fluoroscopy revealed metal fragments in the ground meat packages of 24 (80%) of the 30 deer; 32% of 234 ground meat packages contained at least one fragment. Fragments were identified as lead by ICP in 93% of 27 samples. Isotope ratios of lead in meat matched the ratios of bullets, and differed from background lead in bone. We fed fragment-containing venison to four pigs to test bioavailability; four controls received venison without fragments from the same deer. Mean blood lead concentrations in pigs peaked at 2.29 µg/dL (maximum 3.8 µg/dL) 2 days following ingestion of fragment-containing venison, significantly higher than the 0.63 µg/dL averaged by controls. We conclude that people risk exposure to bioavailable lead from bullet fragments when they eat venison from deer killed with standard lead-based rifle bullets and processed under normal procedures. At risk in the U.S. are some ten million hunters, their families, and low-income beneficiaries of venison donations. PMID:19390698

Biotic and Abiotic Reduction and Solubilization of Pu(IV)O2•xH2O(am) as Affected by Anthraquinone-2,6-disulfonate (AQDS) and Ethylenediaminetetraacetate (EDTA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plymale, Andrew E.; Bailey, Vanessa L.; Fredrickson, Jim K.

2012-01-24

In the presence of hydrogen (H{sub 2}), the synthetic chelating agent ethylenediaminetetraacetate (EDTA), and the electron shuttle anthraquinone-2,6-disulfonate (AQDS), the dissimilatory metal-reducing bacteria (DMRB) Shewanella oneidensis and Geobacter sulfurreducens both reductively solubilized 100% of added 0.5 mM plutonium (IV) hydrous oxide (Pu(IV)O{sub 2} {lg_bullet} xH{sub 2}O{sub (am)}) in {approx}24 h at pH 7 in a non-complexing buffer. In the absence of AQDS, bioreduction was much slower ({approx}22 days) and less extensive ({approx}83-94%). In the absence of DMRB but under comparable conditions, 89% (without AQDS) to 98% (with AQDS) of added 0.5 mM PuO{sub 2} {lg_bullet} xH{sub 2}O{sub (am)} was reductivelymore » solubilized over 418 days. Under comparable conditions but in the absence of EDTA, <0.001% of the 0.5 mM PuO{sub 2} {lg_bullet} xH{sub 2}O{sub (am)} was solubilized, with or without bacteria. However, Pu(aq) increased by as much as an order of magnitude in some EDTA-free treatments, both biotic and abiotic, and increases in solubility were associated with the production of both Pu(OH)3(am) and Pu(III)(aq). Incubation with DMRB in the absence of EDTA increased the polymeric and crystalline content of the PuO{sub 2} {lg_bullet} xH{sub 2}O{sub (am)} and also decreased Pu solubility in 6-N HCl. Results from an in vitro assay demonstrated electron transfer to PuO{sub 2} {lg_bullet} xH{sub 2}O{sub (am)} from the S. oneidensis outer-membrane c-type cytochrome MtrC, and EDTA increased the oxidation of MtrC by PuO{sub 2} {lg_bullet} xH{sub 2}O{sub (am)}. Our results suggest that PuO{sub 2} {lg_bullet} xH{sub 2}O{sub (am)} biotic and abiotic reduction and solubilization may be important in anoxic, reducing environments, especially where complexing ligands and electron shuttling compounds are present.« less

Damage to apparel layers and underlying tissue due to hand-gun bullets.

PubMed

Carr, Debra; Kieser, Jules; Mabbott, Alexander; Mott, Charlotte; Champion, Stephen; Girvan, Elizabeth

2014-01-01

Ballistic damage to the clothing of victims of gunshot wounds to the chest can provide useful forensic evidence. Anyone shot in the torso will usually be wearing clothing which will be damaged by the penetrating impact event and can reportedly be the source of some of the debris in the wound. Minimal research has previously been reported regarding the effect of bullets on apparel fabrics and underlying tissue. This paper examines the effect of ammunition (9 mm full metal jacket [FMJ] DM11 A1B2, 8.0 g; and soft point flat nose Remington R357M3, 10.2 g) on clothing layers that cover the torso (T-shirt, T-shirt plus hoodie, T-shirt plus denim jacket) and underlying structures represented by porcine thoracic wall (skin, underlying tissue, ribs). Impacts were recorded using a Phantom V12 high speed camera. Ejected bone debris was collected before wound tracts were dissected and measured; any debris found was recovered for further analysis. Size and mass of bony debris was recorded; fibre debris recovered from the wound and impact damage to fabrics were imaged using scanning electron microscopy (SEM). Remington R357M3 ammunition was characteristically associated with stellate fabric damage; individual fibres were less likely to show mushrooming. In contrast, 9 mm FMJ ammunition resulted in punch-out damage to fabric layers, with mushrooming of individual fibres being more common. Entry wound sizes were similar for both types of ammunition and smaller than the diameter of the bullet that caused them. In this work, the Remington R357M3 ammunition resulted in larger exit wounds due to the bullet construction which mushroomed. That fabric coverings did not affect the amount of bony debris produced is interesting, particularly given there was some evidence that apparel layers affected the size of the wound. Recent work has suggested that denim (representative of jeans) can exacerbate wounding caused by high-velocity bullet impacts to the thigh when the bullet does not impact the femur. That more bony debris was caused by Remington R357M3 rather than 9 mm FMJ ammunition was not surprising given the relative constructions of these two bullets, and is of interest to medical practitioners.

Self-compression of spatially limited laser pulses in a system of coupled light-guides

NASA Astrophysics Data System (ADS)

Balakin, A. A.; Litvak, A. G.; Mironov, V. A.; Skobelev, S. A.

2018-04-01

The self-action features of wave packets propagating in a 2D system of equidistantly arranged fibers are studied analytically and numerically on the basis of the discrete nonlinear Schrödinger equation. Self-consistent equations for the characteristic scales of a Gaussian wave packet are derived on the basis of the variational approach, which are proved numerically for powers P < 10 P_cr , slightly exceeding the critical one for self-focusing. At higher powers, the wave beams become filamented, and their amplitude is limited due to the nonlinear breaking of the interaction between neighboring light-guides. This makes it impossible to collect a powerful wave beam in a single light-guide. Variational analysis shows the possibility of the adiabatic self-compression of soliton-like laser pulses in the process of 3D self-focusing on the central light-guide. However, further increase of the field amplitude during self-compression leads to the development of longitudinal modulation instability and the formation of a set of light bullets in the central fiber. In the regime of hollow wave beams, filamentation instability becomes predominant. As a result, it becomes possible to form a set of light bullets in optical fibers located on the ring.

The Evaluation of Small Arms Effectiveness Criteria. Volume 2: Appendixes

DTIC Science & Technology

1975-05-01

Island and Burma in World War 11. Of the 208 casualties (WIA and KIA ), 93 were reportedly hit by rifle bullets and 115 by machine gun bullets; 68... motot and an endless cable. The carrier can be fitted with up to three SAAB raising and lowering mechanisms. Carrier speed can be varied up to 9 ft

21 CFR 352.52 - Labeling of sunscreen drug products.

Code of Federal Regulations, 2011 CFR

2011-04-01

... protective clothing, and using sunscreens may reduce the risks of skin aging, skin cancer, and other harmful... “[bullet] for skin that sunburns minimally”. (ii) For products that provide an SPF of 12 to under 30... “[bullet] for skin that sunburns easily”. (iii) For products that provide an SPF of 30 or above. Select one...

21 CFR 352.52 - Labeling of sunscreen drug products.

Code of Federal Regulations, 2010 CFR

2010-04-01

... protective clothing, and using sunscreens may reduce the risks of skin aging, skin cancer, and other harmful... “[bullet] for skin that sunburns minimally”. (ii) For products that provide an SPF of 12 to under 30... “[bullet] for skin that sunburns easily”. (iii) For products that provide an SPF of 30 or above. Select one...

Rogue-wave bullets in a composite (2+1)D nonlinear medium.

PubMed

Chen, Shihua; Soto-Crespo, Jose M; Baronio, Fabio; Grelu, Philippe; Mihalache, Dumitru

2016-07-11

We show that nonlinear wave packets localized in two dimensions with characteristic rogue wave profiles can propagate in a third dimension with significant stability. This unique behavior makes these waves analogous to light bullets, with the additional feature that they propagate on a finite background. Bulletlike rogue-wave singlet and triplet are derived analytically from a composite (2+1)D nonlinear wave equation. The latter can be interpreted as the combination of two integrable (1+1)D models expressed in different dimensions, namely, the Hirota equation and the complex modified Korteweg-de Vries equation. Numerical simulations confirm that the generation of rogue-wave bullets can be observed in the presence of spontaneous modulation instability activated by quantum noise.

Automatic identification of bullet signatures based on consecutive matching striae (CMS) criteria.

PubMed

Chu, Wei; Thompson, Robert M; Song, John; Vorburger, Theodore V

2013-09-10

The consecutive matching striae (CMS) numeric criteria for firearm and toolmark identifications have been widely accepted by forensic examiners, although there have been questions concerning its observer subjectivity and limited statistical support. In this paper, based on signal processing and extraction, a model for the automatic and objective counting of CMS is proposed. The position and shape information of the striae on the bullet land is represented by a feature profile, which is used for determining the CMS number automatically. Rapid counting of CMS number provides a basis for ballistics correlations with large databases and further statistical and probability analysis. Experimental results in this report using bullets fired from ten consecutively manufactured barrels support this developed model. Published by Elsevier Ireland Ltd.

[Bullet and shrapnel injuries in the face and neck regions. Current aspects of wound ballistics].

PubMed

Hauer, T; Huschitt, N; Kulla, M; Kneubuehl, B; Willy, C

2011-08-01

A basic understanding of the ballistic behaviour of projectiles or fragments after entering the human body is essential for the head and neck surgeon in the military environment in order to anticipate the diagnostic and therapeutic consequences of this type of injury. Although a large number of factors influence the missile in flight and after penetration of the body, the most important factor is the amount of energy transmitted to the tissue. Long guns (rifles or shotguns) have a much higher muzzle energy compared to handguns, explaining why the remote effects beyond the bullet track play a major role. While most full metal jacket bullets release their energy after 12-20 cm (depending on the calibre), soft point bullets release their energy immediately after entry into the human body. This results in a major difference in extremity wounds, but not so much in injuries with long bullet paths (e.g. diagonal shots). Shrapnel wounds are usually produced with similarly high kinetic energy to those caused by hand- and long guns. However, fragments tend to dissipate the entire amount of energy within the body, which increases the degree of tissue disruption. Of all relevant injuries in the head and neck region, soft tissue injuries make up the largest proportion (60%), while injuries to the face are seen three times more often than injuries to the neck. Concomitant intracranial or spinal injury is seen in 30% of cases. Due to high levels of wound contamination, the infection rate is approximately 15%, often associated with a complicated and/or multiresistant spectrum of germs.

Non destructive testing of soft body armor

NASA Astrophysics Data System (ADS)

Bhise, Karan

Pristine bullet proof vests are extremely effective at halting pre-determined projectile threats and have saved over 3000 lives. However, the effectiveness of these vests to halt a bullet is seen to decrease over time.Owing to the importance of bullet proof vests over a period of time, tests to determine their effectiveness have been carried out on every batch of vests at the time of inception and at certain time intervals by shooting a bullet through them. A few vests from every batch are picked up and shot at to check for bullet penetration during this process while these results are extrapolated onto the other vests from the batch.One of the main issues with this method is the fact that testing a few jackets among a large set of jackets does not guarantee the safety of every jacket in the entire batch.Further the jackets that are shot-at have the possibility of undergoing substantial damage during the process thus compromising its safety rendering them unsafe for future use.As the vest penetration phenomenon is extremely complex too, there arose a need for a better testing procedure that could not only help ensure more safety, but also save time and money.The new testing procedure proposed a non-destructive evaluation of the jackets that would solve the issues previous faced in testing the vests. This would lead to the building of a portable set up which could be carried to any location to test jackets in a matter of minutes thus saving time and money.

Effect of electrolytes and temperature on dications and radical cations of carotenoids: Electrochemical, optical absorption, and high-performance liquid chromatography studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Z.; Kispert, L.D.

1999-11-25

The effect of supporting electrolytes and temperature on the behavior of dications and radical cations of carotenoids is studied. Cyclic voltammograms (CVs) of canthaxanthin (I) at 23 and {minus}25 C show that Car{sup sm{underscore}bullet+} of I has similar stability during the time of the CV scan, when using tetrabutylammonium perchlorate (TBAPC), tetrabutylammonium tetrafluoroborate (TBATFB), or tetrabutylammonium hexafluorophosphate (TBAHFP) as supporting electrolyte. However, the stability of Car{sup 2+} decreases when using TBAPC or TBATFB; {beta}-carotene (II) shows similar behavior. The CV of I at {minus}25 C shows a strong cathodic wave (wave 6) near {minus}0.15 V (vs Ag) with an intensitymore » about half that of the neutral oxidation wave when TBAPC or TBATFB is the supporting electrolyte. When TBAHFP is used, wave 6 (ca. {minus}0.05 V vs Ag) is ca. 8 times weaker than when TBAPC or TBATFB is used. This wave results from the reduction of a species that may be a decay product of Car{sup 2+} of I. Results show that these electrolytes commonly used in electrochemical studies may affect the studied systems to different extents. In simultaneous bulk electrolysis (BE) and optical absorption spectroscopic measurements, the absorption band of Car{sup 2+} of I in the presence of 0.1 M TBAHFP can be observed by lowering the BE temperature to {minus}20 C. In the presence of 0.1 M TBAPC or TBATFB, this band is not observed, even at {minus}50 C. Isomerization of neutral I (as shown by HPLC and its blue absorption band shift) is observed only when the Car{sup 2+} absorption band is absent during BE. This observation, along with an increase of the neutral absorption band after stopping BE, suggests that the equilibrium Car + Car{sup 2+} {r{underscore}equilibrium} 2Car{sup {sm{underscore}bullet}+} is shifted to the left because Car{sup 2+} decays more quickly than Car{sup {sm{underscore}bullet}+} in the presence of electrolyte and this is a major path for formation of cis neutral species from cis Car{sup {sm{underscore}bullet}+}. The optical absorption of Car{sup 2+} of I at 18 C in the presence of 0.1 M TBAHFP is obtained, which suggests that Car{sup 2+} of I is not as unstable at room temperature in the presence of TBAHFP as was thought before.« less

75 FR 58377 - Lead in Ammunition and Fishing Sinkers; Disposition of TSCA Section 21 Petition

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2010-0681; FRL-8847-5] Lead in Ammunition and Fishing..., and distribution in commerce of (1) lead bullets and shot; and (2) lead fishing sinkers. On August 27, 2010, EPA denied the first request due to a lack of authority to regulate lead in bullets and shot...

Autopsy findings of suicidal deaths committed by firearms in Ankara, Turkey.

PubMed

Canturk, Gurol; Canturk, Nergis; Odabasi, Aysun Balseven; Erkol, Zerrin; Bosgelmez, Memnune

2009-07-01

The purpose of this study was to examine autopsy findings from suicidal deaths using firearms in Ankara, Turkey, and to compare the results with those reported from other studies. We retrospectively evaluated suicidal deaths by firearms referred for autopsy to the Morgue Department, Institute of Forensic Medicine, between 2002 and 2004. Results were subjected to discriminant analyses using SPSS 11.5 package program. One hundred and fifteen cases (83.3%) were male, the ratio of male to female was 5 to 1 and the mean age was 31.96 years (range:12-85 years). Forty cases were aged between 12 years and 20 years, 28 were aged between 0 and 18 (20.29%). One hundred and thirty-three cases (96.4%) had one bullet entry and five cases (3.6%) had two bullet entries. Out of 143 bullet entries, 116 (81.12%) were caused by gunshots fired from contact or near contact range. Regarding bullet entry sites, 103 (72.03%) were on the head with 56 (54.37%) located on the right temporal region. Gunshot related crimes are an increasing cause for concern in Turkey. However, a simple preventive measure may prevent the suicidal deaths of many young people.

Simulating direct shear tests with the Bullet physics library: A validation study.

PubMed

Izadi, Ehsan; Bezuijen, Adam

2018-01-01

This study focuses on the possible uses of physics engines, and more specifically the Bullet physics library, to simulate granular systems. Physics engines are employed extensively in the video gaming, animation and movie industries to create physically plausible scenes. They are designed to deliver a fast, stable, and optimal simulation of certain systems such as rigid bodies, soft bodies and fluids. This study focuses exclusively on simulating granular media in the context of rigid body dynamics with the Bullet physics library. The first step was to validate the results of the simulations of direct shear testing on uniform-sized metal beads on the basis of laboratory experiments. The difference in the average angle of mobilized frictions was found to be only 1.0°. In addition, a very close match was found between dilatancy in the laboratory samples and in the simulations. A comprehensive study was then conducted to determine the failure and post-failure mechanism. We conclude with the presentation of a simulation of a direct shear test on real soil which demonstrated that Bullet has all the capabilities needed to be used as software for simulating granular systems.

Interrami intraoral fixation technique for severe mandibular rifle fragmented bullet injury management.

PubMed

Shuker, Sabri T

2013-07-01

Interrami intraoral Kirschner wire fixation technique is presented for the reduction, stabilization, and immobilization of a pulverized and avulsed lower jaw caused by rifle fragmented bullet injuries. This indirect mandibular war injury fixation technique was tolerated by the patients and tissue more than any indirect external fixation. In addition, it is easier than open reduction using large bone plates for disrupted ballistics mandibular injury defects. An interrami intraoral fixation is appropriate for severely disrupted mandibular hard and soft tissues, and has been adapted in cases of mass casualties and limited resources. Benefits of use include limited hospital beds and fewer follow-up visits. Rifle fragmented bullet injuries need more attention for several reasons: not only because of the higher mortality and devastating nature of the injuries, but also because these injuries are responsible for an unreported type of bullet biomechanism wounding in the craniofacial region. In turn, this necessitates specialized victim management. The survival rates depend on immediate proper execution of airway, breathing, and circulation, which become more complicated as it relates to airway compromise and oropharyngeal hemorrhage resuscitation. Survival is predicated on the implementation of feasible, sensible, life-saving techniques that are applied at the appropriate time.

A prospective observational study assessing the feasibility of measuring blood lead levels in New Zealand hunters eating meat harvested with lead projectiles.

PubMed

Buenz, Eric J; Parry, Gareth J; Bauer, Brent A; Matheny, Lauren M; Breukel, Klaasz

2017-03-01

There is no safe level of lead exposure. Correlations suggest that hunters harvesting wild game with lead bullets may be at risk of lead exposure through eating minute lead particles from shrapnel in their wild game. This feasibility study will determine if it is possible to conduct an interventional controlled, blinded study to evaluate if there is a causal relationship between meat harvested with lead bullets and elevated blood lead levels in those who consume the meat. This is an observational case crossover study and the primary outcome is blood lead levels. Individuals will have blood lead levels measured 2-4 days after eating one serving of meat harvested with lead bullets. At three potential washout periods these same individuals will have a subsequent blood lead level analysis. This observational study will provide the data necessary to determine the washout period and sample size for a prospective interventional study to evaluate if meat harvested with lead bullets raises blood-lead levels in those who consume the meat. This study has been approved by the Health and Disabilities Ethics Committees of New Zealand. NCT02775890.

Comparison of Gunshot Entrance Morphologies Caused by .40-Caliber Smith & Wesson, .380-Caliber, and 9-mm Luger Bullets: A Finite Element Analysis Study

PubMed Central

Matoso, Rodrigo Ivo; Freire, Alexandre Rodrigues; Santos, Leonardo Soriano de Mello; Daruge Junior, Eduardo; Rossi, Ana Claudia; Prado, Felippe Bevilacqua

2014-01-01

Firearms can cause fatal wounds, which can be identified by traces on or around the body. However, there are cases where neither the bullet nor gun is found at the crime scene. Ballistic research involving finite element models can reproduce computational biomechanical conditions, without compromising bioethics, as they involve no direct tests on animals or humans. This study aims to compare the morphologies of gunshot entrance holes caused by.40-caliber Smith & Wesson (S&W), .380-caliber, and 9×19-mm Luger bullets. A fully metal-jacketed.40 S&W projectile, a fully metal-jacketed.380 projectile, and a fully metal-jacketed 9×19-mm Luger projectile were computationally fired at the glabellar region of the finite element model from a distance of 10 cm, at perpendicular incidence. The results show different morphologies in the entrance holes produced by the three bullets, using the same skull at the same shot distance. The results and traits of the entrance holes are discussed. Finite element models allow feasible computational ballistic research, which may be useful to forensic experts when comparing and analyzing data related to gunshot wounds in the forehead. PMID:25343337

Release of copper from embedded solid copper bullets into muscle and fat tissues of fallow deer (Dama dama), roe deer (Capreolus capreolus), and wild boar (Sus scrofa) and effect of copper content on oxidative stability of heat-processed meat.

PubMed

Schuhmann-Irschik, I; Sager, M; Paulsen, P; Tichy, A; Bauer, F

2015-10-01

When venison with embedded copper bullets was subjected to different culinary processing procedures, the amount of copper released from the embedded bullet was affected more by the retention period of the bullet in the meat during cool storage, than by the different heating protocols. The presence of copper fragments had no significant effect on levels of thiobarbituric acid reactive substances (TBARS). Conversely, TBARS in lean meat (fallow deer, wild boar, roe deer) were significantly affected by culinary treatment (higher TBARS in boiled and boiled-stored meat than in meat barbecued or boiled in brine). In pork-beef patties doped with up to 28mg/kg Cu, TBARS increased after dry-heating and subsequently storing the meat patties. The amount of copper doping had no effect on TBARS for 0 and 7days of storage, but a significant effect at day 14 (fat oxidation retarded at higher Cu doses). Evidence is presented that wild boar meat may be more sensitive to fat oxidation than pork-beef. Copyright © 2015 Elsevier Ltd. All rights reserved.

Use of a simplified consent form to facilitate patient understanding of informed consent for laparoscopic cholecystectomy

PubMed Central

Borello, Alessandro; Passera, Roberto; Surace, Alessandra; Marola, Silvia; Buccelli, Claudio; Niola, Massimo; Di Lorenzo, Pierpaolo; Amato, Maurizio; Di Domenico, Lorenza; Solej, Mario; Martino, Valter

2016-01-01

Abstract Background Surgical informed consent forms can be complicated for patients to read and understand. We created a consent form with key information presented in bulleted texts and diagrams combined in a graphical format to facilitate the understanding of information during the verbal consent discussion. Methods This prospective, randomized study involved 70 adult patients awaiting cholecystectomy for gallstones. Consent was obtained after standard verbal explanation using either a graphically formatted (study group, n=33) or a standard text document (control group, n=37). Comprehension was evaluated with a 9-item multiple-choice questionnaire administered before surgery and factors affecting comprehension were analyzed. Results Comparison of questionnaire scores showed no effect of age, sex, time between consent and surgery, or document format on understanding of informed consent. Educational level was the only predictor of comprehension. Conclusions Simplified surgical consent documents meet the goals of health literacy and informed consent. Educational level appears to be a strong predictor of understanding. PMID:28352847

Use of a simplified consent form to facilitate patient understanding of informed consent for laparoscopic cholecystectomy.

PubMed

Borello, Alessandro; Ferrarese, Alessia; Passera, Roberto; Surace, Alessandra; Marola, Silvia; Buccelli, Claudio; Niola, Massimo; Di Lorenzo, Pierpaolo; Amato, Maurizio; Di Domenico, Lorenza; Solej, Mario; Martino, Valter

2016-01-01

Surgical informed consent forms can be complicated for patients to read and understand. We created a consent form with key information presented in bulleted texts and diagrams combined in a graphical format to facilitate the understanding of information during the verbal consent discussion. This prospective, randomized study involved 70 adult patients awaiting cholecystectomy for gallstones. Consent was obtained after standard verbal explanation using either a graphically formatted (study group, n=33) or a standard text document (control group, n=37). Comprehension was evaluated with a 9-item multiple-choice questionnaire administered before surgery and factors affecting comprehension were analyzed. Comparison of questionnaire scores showed no effect of age, sex, time between consent and surgery, or document format on understanding of informed consent. Educational level was the only predictor of comprehension. Simplified surgical consent documents meet the goals of health literacy and informed consent. Educational level appears to be a strong predictor of understanding.

Targeting active cancer cells with smart bullets.

PubMed

Martel, Sylvain

2017-03-01

Paul Ehrlich's 'magic bullet' concept has stimulated research for therapeutic agents with the capability to go straight to their intended targets. The 'magic bullet' concept is still considered the ultimate approach to maximize the therapeutic effects of a given therapeutic agent without affecting nontargeted tissues. But so far, there has never been a therapeutic agent or a delivery system that goes straight to the target in the body, and no approach has provided anything better than just a few percents of the total administered dose reaching the intended target sites. But engineering principles can transform systematically circulating vectors that so far were based primarily on physical characteristics and biochemical principles alone, as smart therapeutic agents with the required propulsion-navigation-homing capabilities to enable them to go straight to their intended targets.

[Injury patterns and roentgen findings in gunshot wounds with rare flint ammunition].

PubMed

Pollak, S; Lindermann, A

1990-01-01

Smoothbore shotgun barrels can fire cartridges with common pellet loads as well as shotgun slugs and rubber bullets. Other than conventional shot, the cylindrical Brenneke-type rifled shotgun slugs sometimes cause perforating wounds. The shotgun ammunition for use in self-defence can have a single projectile or several rubber pellets. Where the propellant is black powder, short range shots will probably leave searing marks and intensive soot deposits. Fired at close range, rubber bullets can penetrate through the skin into the body, fired at greater distance they cause contusions. A case of homicide (repeated firing with a 12-ga. pump gun) is used to present and discuss the injury patterns and X-ray findings after impact of Brenneke-type slugs and rubber bullets as well as of "classical" shot pellets.

CALL FOR PAPERS: Progress in Supersymmetric Quantum Mechanics

NASA Astrophysics Data System (ADS)

2003-11-01

This is a call for contributions to a Special Issue of Journal of Physics A: Mathematical and General entitled `Statistical Physics of Disordered Systems: from Real Materials to Optimization and Codes'. This issue should be a place for high quality original work. We stress the fact that we are interested in having the topic interpreted broadly: we would like to have contributions ranging from equilibrium and dynamical studies of spin glasses, glassy behaviour in amorphous materials, and low temperature physics, to applications in non-conventional areas such as error correcting codes, image analysis and reconstruction, optimization, and algorithms based on statistical mechanical ideas. We believe that we have arrived at a very exciting moment for the development of this multidisciplinary approach, and that this issue will be of a high standard and prove to be a very useful tool in the future. The Editorial Board has invited E Marinari, H Nishimori and F Ricci-Tersenghi to serve as Guest Editors for the Special Issue. Their criteria for acceptance of contributions are the following: bullet The subject of the paper should relate to the statistical physics of disordered systems. bullet Contributions will be refereed and processed according to the usual procedures of the journal. bullet Papers should be original (they should not be simply reviews of authors' own work that is already published elsewhere). bullet Review articles will be considered for inclusion in the Special Issue only in very special cases. The editors will analyse potential proposals of reviews, and if needed they will ask for some review contributions. The guidelines for the preparation of contributions are the following: bullet The deadline for submission of contributions is 31 March 2003. This deadline will allow the Special Issue to appear in about October 2003. bullet There is a nominal page limit of 15 printed pages (approximately 9000 words) per research contribution. The contributions that have been approved by the Guest Editors as review articles will have a limit of 30 printed pages (18000 words). Papers exceeding these limits may be accepted at the discretion of the Guest Editors. Further advice on publishing your work in Journal of Physics A: Mathematical and General may be found at www.iop.org/Journals/jphysa. bullet Contributions to the Special Issue should if possible be submitted electronically at www.iop.org/Journals/jphysa or by e-mail to jphysa@iop.org, quoting `JPhysA Special Issue -- Statistical Physics of Disordered Systems'. Submissions should ideally be in either standard LaTeX form or Microsoft Word. Please see the web site for further information on electronic submissions. bullet Authors unable to submit electronically may send hard copy contributions to: Publishing Administrators, Journal of Physics A, Institute of Physics Publishing, Dirac House, Temple Back, Bristol BS1 6BE, UK, enclosing the electronic code on floppy disk if available and quoting `JPhysA Special Issue -- Statistical Physics of Disordered Systems'. bullet All contributions should be accompanied by a read-me file or covering letter giving the postal and e-mail addresses for correspondence. The Publishing Office should be notified of any subsequent change of address. This Special Issue will be published in both paper and online editions of the journal. The corresponding author of each contribution will receive a complimentary copy of the issue in addition to the usual 25 free offprints of their article. E Marinari, H Nishimori and F Ricci-Tersenghi Guest Editors

Smaller Footprint Drilling System for Deep and Hard Rock Environments; Feasibility of Ultra-High-Speed Diamond Drilling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnis Judzis; Homer Robertson; Alan Black

2006-06-22

The two phase program addresses long-term developments in deep well and hard rock drilling. TerraTek believes that significant improvements in drilling deep hard rock will be obtained by applying ultra-high rotational speeds (greater than 10,000 rpm). The work includes a feasibility of concept research effort aimed at development that will ultimately result in the ability to reliably drill ''faster and deeper'' possibly with smaller, more mobile rigs. The principle focus is on demonstration testing of diamond bits rotating at speeds in excess of 10,000 rpm to achieve high rate of penetration (ROP) rock cutting with substantially lower inputs of energymore » and loads. The significance of the ''ultra-high rotary speed drilling system'' is the ability to drill into rock at very low weights on bit and possibly lower energy levels. The drilling and coring industry today does not practice this technology. The highest rotary speed systems in oil field and mining drilling and coring today run less than 10,000 rpm-usually well below 5,000 rpm. This document details the progress at the end of Phase 1 on the program entitled ''Smaller Footprint Drilling System for Deep and Hard Rock Environments: Feasibility of Ultra-High-Speed Diamond Drilling'' for the period starting 1 March 2006 and concluding 30 June 2006. (Note: Results from 1 September 2005 through 28 February 2006 were included in the previous report (see Judzis, Black, and Robertson)). Summarizing the accomplished during Phase 1: {lg_bullet} TerraTek reviewed applicable literature and documentation and convened a project kickoff meeting with Industry Advisors in attendance (see Black and Judzis). {lg_bullet} TerraTek designed and planned Phase I bench scale experiments (See Black and Judzis). Some difficulties continued in obtaining ultra-high speed motors. Improvements were made to the loading mechanism and the rotational speed monitoring instrumentation. New drill bit designs were developed to provided a more consistent product with consistent performance. A test matrix for the final core bit testing program was completed. {lg_bullet} TerraTek concluded Task 3 ''Small-scale cutting performance tests.'' {sm_bullet} Significant testing was performed on nine different rocks. {sm_bullet} Five rocks were used for the final testing. The final tests were based on statistical design of experiments. {sm_bullet} Two full-faced bits, a small diameter and a large diameter, were run in Berea sandstone. {lg_bullet} Analysis of data was completed and indicates that there is decreased specific energy as the rotational speed increases (Task 4). Data analysis from early trials was used to direct the efforts of the final testing for Phase I (Task 5). {lg_bullet} Technology transfer (Task 6) was accomplished with technical presentations to the industry (see Judzis, Boucher, McCammon, and Black).« less

When clusters collide: constraints on antimatter on the largest scales

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steigman, Gary, E-mail: steigman@mps.ohio-state.edu

2008-10-15

Observations have ruled out the presence of significant amounts of antimatter in the Universe on scales ranging from the solar system, to the Galaxy, to groups and clusters of galaxies, and even to distances comparable to the scale of the present horizon. Except for the model-dependent constraints on the largest scales, the most significant upper limits to diffuse antimatter in the Universe are those on the {approx}Mpc scale of clusters of galaxies provided by the EGRET upper bounds to annihilation gamma rays from galaxy clusters whose intracluster gas is revealed through its x-ray emission. On the scale of individual clustersmore » of galaxies the upper bounds to the fraction of mixed matter and antimatter for the 55 clusters from a flux-limited x-ray survey range from 5 Multiplication-Sign 10{sup -9} to <1 Multiplication-Sign 10{sup -6}, strongly suggesting that individual clusters of galaxies are made entirely of matter or of antimatter. X-ray and gamma-ray observations of colliding clusters of galaxies, such as the Bullet Cluster, permit these constraints to be extended to even larger scales. If the observations of the Bullet Cluster, where the upper bound to the antimatter fraction is found to be <3 Multiplication-Sign 10{sup -6}, can be generalized to other colliding clusters of galaxies, cosmologically significant amounts of antimatter will be excluded on scales of order {approx}20 Mpc (M{approx}5 Multiplication-Sign 10{sup 15}M{sub sun})« less

High-velocity Interstellar Bullets in IRAS 05506+2414: A Very Young Protostar

NASA Technical Reports Server (NTRS)

Sahai, Raghvendra; Claussen, Mark; Sanchez Contreras, Carmen; Morris, Mark; Sarkar, Geetanjali

2008-01-01

We have made a serendipitous discovery of an enigmatic outflow source, IRAS 05506+2414 (hereafter IRAS 05506), as part of a multiwavelength survey of pre-planetary nebulae (PPNs). The HST optical and near-infrared images show a bright compact central source with a jet-like extension, and a fan-like spray of high-velocity (with radial velocities up to 350 km/s) elongated knots which appear to emanate from it. These structures are possibly analogous to the near-IR bullets'' seen in the Orion Nebula. Interferometric observations at 2.6 mm show the presence of a continuum source and a high-velocity CO outflow, which is aligned with the optical jet structure. IRAS 05506 is most likely not a PPN. We find extended NH3 (1,1) emission toward IRAS 05506; these data, together with the combined presence of far-IR emission, H2O and OH masers, and CO and CS J=2-1 emission, strongly argue for a dense, dusty star-forming core associated with IRAS 05506. IRAS 05506 is probably an intermediate-mass or massive protostar, and the very short timescale (200 yr) of its outflows indicates that it is very young. If IRAS 05506 is a massive star, then the lack of radio continuum and the late G to early K spectral type we find from our optical spectra imply that in this object we are witnessing the earliest stages of its life, while its temperature is still too low to provide sufficient UV flux for ionization.

Understanding the Anti-Access and Area Denial Threat: An Army Perspective

DTIC Science & Technology

2015-05-21

Perspective Approved by: , Monograph Director Peter J . Schifferle, PhD , Seminar Leader James MacGregor, COL...targeting purposes. See also: Ben Berk , China’s Silver Bullet: A Brief Analysis of the Threat Posed by the PRC’s Anti- ship Ballistic Missile (Chapel...16Ben Berk , China’s Silver Bullet: A Brief Analysis of the Threat Posed by the PRC’s Anti

Fort Knox, KY Containment Berm Unit Installation

DTIC Science & Technology

2013-02-01

There is interest from the range community in establishing a sustainable, closed loop small arms firing range (SAFR) bullet impact system or Containment... system . The metals from the bullets will be retained, stabilized, in the berm material with the addition of proper amendments. Following sufficient...replaced or placed back in the connex. This provides a closed loop containment system for sustainable range training purposes. The Containment Berm

Intraorbital foreign body: A rifle bullet removed 20 years after the accident.

PubMed

Clarós, P; Fokouo, J V F; Clarós, A

2017-02-01

Trauma of the orbit and eyeball is common, but intraorbital bullet is a relatively rare event. The authors report the management of a patient with chorioretinitis sclopetaria secondary to a gunshot wound twenty years previously. The clinical, diagnostic and therapeutic aspects of this unusual case of intraorbital foreign body are discussed. Copyright © 2016. Published by Elsevier Masson SAS.

Immunoconjugates: Magic Bullets for Cancer Therapy?

NASA Technical Reports Server (NTRS)

Passeri, Daniel R.; Spiegel, Jack

1993-01-01

Conjugating cytotoxic agents to antibodies allows for site-specific delivery of the agent to tumor cells and should provide increased efficacy and reduced non-specific toxicity. These site-specific cytotoxic agents are known as immunoconjugates or 'magic bullets' and have demonstrated great promise as therapeutic agents for cancer and other diseases. The historical developments and future potential of this new approach to cancer therapy are reviewed.

Failure mechanism of resistance-spot-welded specimens impacted on base material by bullets

NASA Astrophysics Data System (ADS)

Fan, Chunlei; Ma, Bohan; Chen, Danian; Wang, Huanran; Ma, Dongfang

2018-01-01

The tests of bullet impact on the base material (BM) of a simple specimen with a single resistance-spot-welded (RSW) nugget of TRIP800 steel are performed to investigate the response of the RSW specimen to the ballistic debris impact on the RSW specimen. A one-stage gas gun is used to fire the bullets while a laser velocity interferometer system for any reflector (VISAR) is used to measure the velocity histories of the free surfaces of the RSW specimen. The recovered RSW specimens are examined with the three-dimensional super depth digital microscope (SDDM) and the scanning electro microscope (SEM). For the tests of small multiple-bullet impact, it is revealed that the wave train of the VISAR measured results and the detachment of the base material interfaces in the recovered RSW specimens are directly related to the reflection and refraction of the curved stress waves incoming to the interfaces and the free surfaces in the RSW specimens. The detachment of BM interfaces can lead to the impact failure of the RSW joints for the larger multiple-bullet impact at higher velocity, the mechanism of which is different from the case for normal incidence (spalling). For the tests of single large bullet impact, it is brought to light experimentally that the plastic strain concentration at the "notch tip" spurs either the crack near the RSW joint or the split of the nugget. The numerical simulation shows up the process of splitting the nugget: a crack initiates at the "notch tip", propagates across the nugget interface and splits the nugget into two parts. It is indicated that the interaction between the stress waves and many interfaces/free surfaces in the RSW specimen under ballistic impact causes variable local stress triaxialities and stress Lode angles, which affects the deformation and fracture mechanism of the RSW specimen including stretching and shearing failure. It is shown that the impact failure of the RSW joints is a mixture of brittle fracture and ductile fracture while the fracture or perforation of the BM is ductile.

Is estimated bullet trajectory a reliable predictor of severe injury? Case report of a thoraco-abdominal gunshot with a protracted trajectory managed nonoperatively.

PubMed

Khan, Muhammad Sohaib; Khan, Bilal Masood; Naz, Sumbul; Pirzada, Muhammad Taqi

2013-02-15

Operative management of all gunshot's traumas carries a high rate of unwarranted interventions that are known to cause serious complications. Selective nonoperative management is thus being increasingly practiced which has reduced these avoidable interventions. Physical examination and computed tomography scans are most sensitive in assessing need of laparotomy. Assessment of internal injuries on the basis of an estimated bullet trajectory is often practiced but has seldom been studied. We report a case of conservative management of a thoraco abdominal gun shot patient where an estimated bullet trajectory was indicative of serious injuries. To the best of our knowledge this is the first report of a thoraco abdominal gunshot that, despite of a protracted trajectory, had no sequelae and was thus managed nonoperatively. A 30 year old male patient having height of 180 cm and weight of 70 kg (Body Mass Index 21.6) presented with complaint of a penetrating injury at left side of upper torso. The patient had no symptoms or obvious bleeding and was vitally stable. On examination a 1 cm × 1 cm entry wound at the left 3rd intercostal space in the mid clavicular line was identified. The chest and abdomen were otherwise unremarkable on examination. The chest radiograph displayed clear lung fields. The abdominal radiographs displayed a bullet in the upper left quadrant of the abdomen lateral to the spine. The bullets estimated trajectory from 3rd intercostal space and its lodgment in the abdomen lateral to the spine indicated severe visceral injury. The computed tomography scan showed that the bullet was lodged postero-medially to the left kidney. All thoracic, intra peritoneal and retroperitoneal visceral structures were identified to be normal. The patient remained clinically and vitally stable, hence was managed nonoperatively being discharged after 48 h of observation. From this case we conclude that decision for managing gun shot patients should be based on objective clinical and diagnostic findings. We recommend further investigation of the predictability of estimated trajectory for visceral injuries and consequent operative intervention as we found it to be misleading in this case.

Is estimated bullet trajectory a reliable predictor of severe injury? Case report of a thoraco-abdominal gunshot with a protracted trajectory managed nonoperatively

PubMed Central

2013-01-01

Background Operative management of all gunshot’s traumas carries a high rate of unwarranted interventions that are known to cause serious complications. Selective nonoperative management is thus being increasingly practiced which has reduced these avoidable interventions. Physical examination and computed tomography scans are most sensitive in assessing need of laparotomy. Assessment of internal injuries on the basis of an estimated bullet trajectory is often practiced but has seldom been studied. We report a case of conservative management of a thoraco abdominal gun shot patient where an estimated bullet trajectory was indicative of serious injuries. To the best of our knowledge this is the first report of a thoraco abdominal gunshot that, despite of a protracted trajectory, had no sequelae and was thus managed nonoperatively. Case presentation A 30 year old male patient having height of 180 cm and weight of 70 kg (Body Mass Index 21.6) presented with complaint of a penetrating injury at left side of upper torso. The patient had no symptoms or obvious bleeding and was vitally stable. On examination a 1 cm × 1 cm entry wound at the left 3rd intercostal space in the mid clavicular line was identified. The chest and abdomen were otherwise unremarkable on examination. The chest radiograph displayed clear lung fields. The abdominal radiographs displayed a bullet in the upper left quadrant of the abdomen lateral to the spine. The bullets estimated trajectory from 3rd intercostal space and its lodgment in the abdomen lateral to the spine indicated severe visceral injury. The computed tomography scan showed that the bullet was lodged postero-medially to the left kidney. All thoracic, intra peritoneal and retroperitoneal visceral structures were identified to be normal. The patient remained clinically and vitally stable, hence was managed nonoperatively being discharged after 48 h of observation. Conclusion From this case we conclude that decision for managing gun shot patients should be based on objective clinical and diagnostic findings. We recommend further investigation of the predictability of estimated trajectory for visceral injuries and consequent operative intervention as we found it to be misleading in this case. PMID:23414905

Characterizing the interaction among bullet, body armor, and human and surrogate targets.

PubMed

Shen, Weixin; Niu, Yuqing; Bykanova, Lucy; Laurence, Peter; Link, Norman

2010-12-01

This study used a combined experimental and modeling approach to characterize and quantify the interaction among bullet, body armor, and human surrogate targets during the 10-1000 μs range that is crucial to evaluating the protective effectiveness of body armor against blunt injuries. Ballistic tests incorporating high-speed flash X-ray measurements were performed to acquire the deformations of bullets and body armor samples placed against ballistic clay and gelatin targets with images taken between 10 μs and 1 ms of the initial impact. Finite element models (FEMs) of bullet, armor, and gelatin and clay targets were developed with material parameters selected to best fit model calculations to the test measurements. FEMs of bullet and armor interactions were then assembled with a FEM of a human torso and FEMs of clay and gelatin blocks in the shape of a human torso to examine the effects of target material and geometry on the interaction. Test and simulation results revealed three distinct loading phases during the interaction. In the first phase, the bullet was significantly slowed in about 60 μs as it transferred a major portion of its energy into the body armor. In the second phase, fibers inside the armor were pulled toward the point of impact and kept on absorbing energy until about 100 μs after the initial impact when energy absorption reached its peak. In the third phase, the deformation on the armor's back face continued to grow and energies inside both armor and targets redistributed through wave propagation. The results indicated that armor deformation and energy absorption in the second and third phases were significantly affected by the material properties (density and stiffness) and geometrical characteristics (curvature and gap at the armor-target interface) of the targets. Valid surrogate targets for testing the ballistic resistance of the armor need to account for these factors and produce the same armor deformation and energy absorption as on a human torso until at least about 100 μs (maximum armor energy absorption) or more preferably 300 μs (maximum armor deformation).

High-Precision (MC-ICPMS) Isotope Ratio Analysis Reveals Contrasting Sources of Elevated Blood Lead Levels of an Adult with Retained Bullet Fragments, and of His Child, in Milwaukee, Wisconsin.

PubMed

Smith, Kate E; Shafer, Martin M; Weiss, Debora; Anderson, Henry A; Gorski, Patrick R

2017-05-01

Exposure to the neurotoxic element lead (Pb) continues to be a major human health concern, particularly for children in US urban settings, and the need for robust tools for assessment of exposure sources has never been greater. The latest generation of multicollector inductively coupled plasma mass spectrometry (MC-ICPMS) instrumentation offers the capability of using Pb isotopic signatures as a tool for environmental source tracking in public health. We present a case where MC-ICPMS was applied to isotopically resolve Pb sources in human clinical samples. An adult male and his child residing in Milwaukee, Wisconsin, presented to care in August 2015 with elevated blood lead levels (BLLs) (>200 μg/dL for the adult and 10 μg/dL for the child). The adult subject is a gunshot victim who had multiple bullet fragments embedded in soft tissue of his thigh for approximately 10 years. This study compared the high-precision isotopic fingerprints (<1 ‰ 2σ external precision) of Pb in the adult's and child's whole blood (WB) to the following possible Pb sources: a surgically extracted bullet fragment, household paint samples and tap water, and a Pb water-distribution pipe removed from servicing a house in the same neighborhood. Pb in the bullet and adult WB were nearly isotopically indistinguishable (matching within 0.05-0.56 ‰), indicating that bullet fragments embedded in soft tissue could be the cause of both acute and chronic elevated blood Pb levels. Among other sources investigated, no single source dominated the child's exposure profile as reflected in the elevated BLL.

Diet-derived microRNAs: unicorn or silver bullet?

PubMed

Witwer, Kenneth W; Zhang, Chen-Yu

2017-01-01

In ancient lore, a bullet cast from silver is the only effective weapon against monsters. The uptake of active diet-derived microRNAs (miRNAs) in consumers may be the silver bullet long sought after in nutrition and oral therapeutics. However, the majority of scientists consider the transfer and regulation of consumer's gene activity by these diet-derived miRNAs to be a fantasy akin to spotting a unicorn. Nevertheless, groups like Dr. Chen-Yu Zhang's lab in Nanjing University have stockpiled breathtaking amounts of data to shoot down these naysayers. Meanwhile, Dr. Ken Witwer at John Hopkins has steadfastly cautioned the field to beware of fallacies caused by contamination, technical artifacts, and confirmation bias. Here, Dr. Witwer and Dr. Zhang share their realities of dietary miRNAs by answering five questions related to this controversial field.

Deep observation of A2163: studying a new bullet cluster

NASA Astrophysics Data System (ADS)

Bourdin, Herve

2011-10-01

Exhibiting a clear spatial separation between the gas and dark matter component of a fastly accreted subcluster, the `bullet cluster', 1E 0657-56, has provided us a unique laboratory to investigate the impact of violent cluster mergers on the Intra-Cluster Medium, galaxies and dark matter properties. In recent analyses of X-ray, optical and weak-lensing data, we show that the massive cluster A2163 also exhibits a crossing gas bullet separated from a galaxy and dark matter over-density, and suggest that both A2163 and 1E 0657-56 share a common merging scenario possibly just differing in the time elapsed after the closest cluster encounters. With this deeper XMM observation of A2163, we propose to refine our knowledge of the dynamics and geometry of the on-going subcluster accretion.

[The possibilities for the expert diagnostics of the influence of the glance of a bullet on the character of the injuries inflicted by shooting a hunting weapon].

PubMed

Makarov, I Yu; Galkina, A M; Kinle, A F; Fetisov, V A

The objective of the present work was to study and analyze the available data concerning the influence of the glance of a bullet on the character of the injuries inflicted by shooting certain types of hunting weapons. This review gives evidence of the possibility of the objective diagnostics of the injuries inflicted by gunshots using the rifle-bore weapons. However, we have failed to find information about the diagnostic criteria for the evaluation of the wounds inflicted by the bullets shot from smooth-bore hunting rifles after their glance from various surfaces in the available special literature publications. Such situation creates the prerequisites for the erroneous conclusions from the results of forensic medical expertise of the after-penetration blunt wounds.

Radiation Detection Field Test at the Federal Express (FedEx) Air Cargo Facility at Denver International Airport (DIA)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weirup, D; Waters, A; Hall, H

2004-02-11

Lawrence Livermore National Laboratory (LLNL) recently conducted a field-test of radiation detection and identification equipment at the air cargo facility of Federal Express (FedEx) located at Denver International Airport (DIA) over a period of two weeks. Comprehensive background measurements were performed and were analyzed, and a trial strategy for detection and identification of parcels displaying radioactivity was implemented to aid in future development of a comprehensive protection plan. The purpose of this project was threefold: {sm_bullet} Quantify background radiation environments at an air cargo facility. {sm_bullet} Quantify and identify ''nuisance'' alarms. {sm_bullet} Evaluate the performance of various isotope identifiers deployedmore » in an operational environment (in this case, the operational environment included the biggest blizzard in over 90 years!).« less

Coal-Gen attendees hear there's no magic bullet

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2007-09-15

Those attending COAL-GEN 2007 in August heard that there is no magic bullet for meeting the energy and infrastructure needs facing the USA. The article reports on the conference which addressed topics including development of supercritical circulating fluidized bed coal unit; IGCC projects, the importance of including carbon capture and sequestration, and the need to attract and train personnel to work in the power industry. 3 photos.

Biographical Sources in the Sciences--Life, Earth and Physical Sciences (1989-2006). LC Science Tracer Bullet. TB 06-4

ERIC Educational Resources Information Center

Freitag, Ruth, Comp.; Bradley, Michelle Cadoree, Comp.

2006-01-01

This guide offers a systematic approach to the wide variety of published biographical information on men and women of science in the life, earth and physical sciences, primarily from 1989 to 2006, and complements Library of Congress Science Tracer Bullet "TB88-3" ("Biographical Sources in the Sciences," compiled 1988 [ED306074]) and "TB06-7"…

For whom bell toils: medical imaging by telephone.

PubMed

Kuhfeld, A W

1991-01-01

The use of the induction balance, which was invented by Alexander Graham Bell to cancel out line interference on his telephone, to determine the location of bullets inside the human body is discussed. Experiments conducted to locate a bullet in the body of US President Garfield, who had been shot by an assassin in 1881, are described. The trials on Garfield were unsuccessful, but the approach was later perfected by Bell.

VALUES OF NOISY DUELS WITH NOT-NECESSARILY EQUAL ACCURACY FUNCTIONS.

DTIC Science & Technology

Let G sub mn(P sub 1, P sub 2) be the noisy duel in which the first player has m bullets with accuracy function P sub 1 and the second player has n...bullets with accuracy function P sub 2 where m, n, P sub 1, and P sub 2 are known to both players. Results are well known for the duels in which P sub

Enterococcus faecalis causing delayed spondylodiscitis in a case with retained intraspinal bullet.

PubMed

Aiyer, Siddharth N; Shetty, Ajoy Prasad; Kanna, Rishi; Reddy, Srikanth; Rajasekaran, Shanmuganathan

2016-12-01

Delayed presentations have been reported following gunshot wounds (GSW) with retained intraspinal bullets due to migration of projectile or lead intoxication. We report on the rare occurrence of delayed pyogenic spondylodiscitis and neurological dysfunction following injury from low velocity GSW to the spine with a retained projectile. A 55-year-old male presented 4 months following GSW to the abdomen which resulted in colonic injury and L5 fracture. The patient was treated initially with ileo-transverse anastomosis, antibiotics, without retrieval of the bullet. He developed low back pain, claudication 4 months following GSW and investigations suggested a pyogenic spondylodiscitis at L5-S1. The patient was treated with surgical debridement of infective focus and stabilisation with definitive fusion being performed after an interval of 14 days. The biopsy of the lesion confirmed findings of spondylodiscitis and the culture isolated Enterococcus faecalis species. The patient was treated with antibiotics as per sensitivity and made an uneventful recovery over 4 weeks. The follow-up radiographs showed satisfactory healing at final follow up of 24 months. GSW with colonic perforation have higher incidence of infective complications however majority to these occur in the early postoperative period. This case report demonstrates the possibility of late onset presentation due to spinal infection occurring following colonic perforation with retained intraspinal bullet.

Oral lead bullet fragment exposure in northern bobwhite (Colinus virginianus).

PubMed

Kerr, Richard; Holladay, Jeremy; Holladay, Steven; Tannenbaum, Lawrence; Selcer, Barbara; Meldrum, Blair; Williams, Susan; Jarrett, Timothy; Gogal, Robert

2011-11-01

Lead (Pb) is a worldwide environmental contaminant known to adversely affect multiple organ systems in both mammalian and avian species. In birds, a common route of exposure is via oral ingestion of lead particles. Data are currently lacking for the retention and clearance of Pb bullet fragments in gastrointestinal (GI) tract of birds while linking toxicity with blood Pb levels. In the present study, northern bobwhite quail fed a seed-based diet were orally gavaged with Pb bullet fragments (zero, one or five fragments/bird) and evaluated for rate of fragment clearance, and changes in peripheral blood, renal, immune, and gastrointestinal parameters. Based on radiographs, the majority of the birds cleared or absorbed the fragments by seven days, with the exception of one five-fragment bird which took between 7 and 14 days. Blood Pb levels were higher in males than females, which may be related to egg production in females. In males but not females, feed consumption, body weight gain, packed cell volume (PCV), plasma protein concentration, and δ-aminolevulinic acid dehydratase (δ-ALAD) activity were all adversely affected by five Pb fragments. Birds of both sexes that received a single Pb fragment displayed depressed δ-ALAD, suggesting altered hematologic function, while all birds dosed with five bullet fragments exhibited greater morbidity.

Environmental factors affecting corrosion of munitions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bundy, K.; Bricka, M.; Morales, A.

1995-12-31

Spent small arms munitions have accumulated for years at outdoor firing ranges operated by the DoD and other groups. Used bullets are often subjected to moisture sources. There is increasing concern that accumulations of lead-based munitions represent potential sources of water and soil pollution. To understand both the severity of and solutions to this problem, it is necessary to measure how rapidly bullets corrode and to determine the soil variables affecting the process. In this study M16 bullets were buried in samples of soil taken from Louisiana army firing ranges. Four environmental conditions were simulated; rain water, acid rain, seamore » water, and 50% sea water/50% acid rain. The three electrode technique was used to measure the bullet corrosion. Graphite rods served as counter electrodes. A saturated calomel reference electrode was used along with a specially constructed salt bridge. Electrochemical measurements were conducted using a computer-controlled potentiostat to determine corrosion potential, soil resistance, and corrosion current. The rate of corrosion was found to markedly increase with decreasing soil pH and increasing chloride and moisture contents, with the chloride content being the most influential variable. High soil resistance and noble corrosion potential were found to be associated with low corrosion rates. This is important since both parameters can be readily measured in the field.« less

Surface modification of TiO{sub 2} nanoparticles with carotenoids. EPR study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Konovalova, T.A.; Kispert, L.D.; Konovalov, V.V.

1999-06-03

Among the semiconductors, titanium dioxide is the most suitable for many environmental applications. EPR measurements demonstrate efficient charge separation on carotenoid-modified titanium dioxide nanoparticles (7 nm). Strong complexation of carotenoids containing terminal carboxy groups ({minus}CO{sub 2}H) with the TiO{sub 2} surface leads to electron transfer from the adsorbed carotenoid molecule to the surface trapping site. For these systems, EPR signals of the carotenoid radical cations Car{sup {sm_bullet}+} and the electrons trapped on the TiO{sub 2} are observed before irradiation (77 K). Their UV-visible spectra show an absorption band with a maximum near 650 nm that is characteristic of the trappedmore » electrons. Surface modification of the TiO{sub 2} by other carotenoids results in the formation of a complex with an optical absorption band near 545 nm. These systems form charge-separated pairs [Car{sup {sm_bullet}+}{hor_ellipsis}TiO{sub 2}(e{sup {minus}}{sub tr}){sub surf}. TiO{sub 2}(e{sup {minus}}{sub tr}){sub latt}] only upon 365--600 nm illumination at 77 K. Complexation of the TiO{sub 2} colloids with carotenoids enhances spatial charge separation, shifts the absorption threshold into the visible region, and thus greatly improves the reducing ability of the semiconductor. Photoreduction of acceptor molecules such as 2,5-dichloro-1,4-benzoquinone, nitrobenzene, and oxygen is demonstrated.« less

Polypeptide Liquid Crystal Assisted Assembly of Cylindrically Symmetric Silica-Polypeptide Hybrid Microparticles

NASA Astrophysics Data System (ADS)

Russo, Paul; Rosu, Cornelia; Jacobeen, Shane; Park, Katherine; Yunker, Peter; Reichmanis, Elsa

Liquid crystals can organize dispersed particles into exotic structures. Matching the particle surface coating to the chemistry of the mesogenic phase permits a tight focus on factors such as extended particle shape. The colloidal particles developed for this work consist of a magnetic and fluorescent cylinder-like silica core. One end of the silica is rounded, almost hemispherical, giving the particles a bullet-like shape. These particles are functionalized with helical poly(γ-stearyl-L-glutamate) and dispersed, at different concentrations in cholesteric liquid crystals (ChLC) of the same polymer in tetrahydrofuran. Defects introduced by the particles to the director field of the bulk PSLG/THF host led to a variety of phases, including a quasi-hexagonal alignment of the particles. National Science Foundation.

Quantifying Friction Effects of Molybdenum Disulfide, Tungsten Disulfide, Hexagonal Boron Nitride, and Lubalox as Bullet Coating

DTIC Science & Technology

2012-07-30

is not cost effective for most applications . 15. SUBJECT TERMS armor penetration, brass, copper, full metal jacket, steel penetrator 16... applications . Introduction High barrel friction reduces the muzzle velocity of bullets that is important in maintaining long range trajectories...be effective in a variety of high-temperature and high-pressure applications .[2-4] However, the problem of reducing the force required to push a

Strong emission of terahertz radiation from nanostructured Ge surfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kang, Chul; Maeng, Inhee; Kee, Chul-Sik, E-mail: cskee@gist.ac.kr

2015-06-29

Indirect band gap semiconductors are not efficient emitters of terahertz radiation. Here, we report strong emission of terahertz radiation from germanium wafers with nanostructured surfaces. The amplitude of THz radiation from an array of nano-bullets (nano-cones) is more than five (three) times larger than that from a bare-Ge wafer. The power of the terahertz radiation from a Ge wafer with an array of nano-bullets is comparable to that from n-GaAs wafers, which have been widely used as a terahertz source. We find that the THz radiation from Ge wafers with the nano-bullets is even more powerful than that from n-GaAsmore » for frequencies below 0.6 THz. Our results suggest that introducing properly designed nanostructures on indirect band gap semiconductor wafers is a simple and cheap method to improve the terahertz emission efficiency of the wafers significantly.« less

Defect Complex Effect in Nb Doped TiO2 Ceramics with Colossal Permittivity

NASA Astrophysics Data System (ADS)

Li, Fuchao; Shang, Baoqiang; Liang, Pengfei; Wei, Lingling; Yang, Zupei

2016-10-01

Donor-doped Nb x Ti1- x O2 ( x = 1%, 2%, 4%, 6%, and 8%) ceramics with giant permittivity (>104) and a very low dielectric loss (˜0.05) were sintered under flowing N2 at 1400°C for 10 h. By increasing Nb doping concentration, two different dielectric responses were evidenced in the frequency dependence of dielectric properties of Nb doped TiO2 ceramics, which corresponded to the space charge polarization and the electron-pinned defect-dipoles effect, respectively. Especially, combined with the x-ray photoelectron spectroscopy results, the electron-pinned defect-dipoles induced by the 2({Nb}^{5 + } )_{{Ti}}^{ bullet } to 4({Ti}^{3 + } )^'_{{Ti}} leftarrow {V}_{{o}}^{ bullet bullet } defect complex were further confirmed to give rise to both their high ɛr and low tan δ in the high frequency range for the Nb x Ti1- x O2 ceramics with x > 4%.

Charge dependence of the plasma travel length in atmospheric-pressure plasma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yambe, Kiyoyuki; Konda, Kohmei; Masuda, Seiya

Plasma plume is generated using a quartz tube, helium gas, and foil electrode by applying AC high voltage under the atmosphere. The plasma plume is released into the atmosphere from inside of the quartz tube and is seen as the continuous movement of the plasma bullet. The travel length of plasma bullet is defined from plasma energy and force due to electric field. The drift velocity of plasma bullet has the upper limit under atmospheric-pressure because the drift velocity is determined from the balance between electric field and resistive force due to collisions between plasma and air. The plasma plumemore » charge depends on the drift velocity. Consequently, in the laminar flow of helium gas flow state, the travel length of the plasma plume logarithmically depends on the plasma plume charge which changes with both the electric field and the resistive force.« less

Kinematics of the Ultra-High-Velocity Gas in the Expanding Molecular Shell Adjacent to the W44 Supernova Remnant

NASA Astrophysics Data System (ADS)

Yamada, Masaya; Oka, Tomoharu; Tanaka, Kunihiko; Nomura, Mariko; Takekawa, Shunya; Iwata, Yuhei; Tokuyama, Sekito; Tanabe, Keisuke; Tsujimoto, Shiho; Furusawa, Maiko

2017-01-01

High-velocity compact cloud (HVCC) is a peculiar category of molecular clouds detected in the central molecular zone of our Galaxy (Oka et al. 1998, 2007, and 2012). They are characterized by compact appearances (d < 5 pc) and very large velocity widths (Δ V > 50 km s-1). Some of them show high CO J=3-2/J=1-0 intensity ratios (>= 1.5), indicating that they consist of dense and warm molecular gas. Dispite a number of efforts, we have not reached a comprehensive interpretation of HVCCs. Recently, we detected an extraordinaly broad velocity width feature, the `Bullet', in the molecular cloud interacting with the W44 supernova remnant. The Bullet shares essential properties with HVCCs. Because of its proximity, a close inspection of the Bullet must contribute to the understanding of HVCCs.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guldi, D.M.

A series of water-soluble isomer bis(pyrrolidinium) salts, with C{sub 60}(C{sub 4}H{sub 10}N{sup +}){sub 2} as cationic moiety (2a--2d), were probed in radical- and light-induced reduction studies and compared to bis(carboxylates) C{sub 60}[C(COO{sup {minus}}){sub 2}]{sub 2} and to {gamma}-CD-encapsulated C{sub 60}. Pulse radiolytic reduction of 2a--2d with hydrated electrons and (CH{sub 3}){sub 2}{sup {sm{underscore}bullet}}COH radicals leads to the formation of the fullerene {pi}-radical anion, exhibiting fingerprint absorption characteristics in the near-IR region. Because of the electron-withdrawing nature of the pyrrolidinium groups the electron-acceptor properties of the investigated bis(pyrrolidinium) salts are markedly improved relative to the bis(carboxylates) (C{sub 60}[C(COO{sup {minus}}){sub 2}]{sub 2})more » and also relative to C{sub 60}. For example, the rate constants for the fullerene reduction of 2a--2d with hydrated electrons ((0.88--2.2) x 10{sup 10} M{sup {minus}1} s{sup {minus}1}) and (CH{sub 3}){sub 2}{sm{underscore}bullet}COH radicals ((4.7--7.1) x 10{sup 8} M{sup {minus}1} s{sup {minus}1}) are clearly faster than those noted for C{sub 60}[C(COO{sup {minus}}){sub 2}]{sub 2} (e{sub aq}{sup {minus}}: (0.19--0.34) x 10{sup 10} M{sup {minus}1} s{sup {minus}1}; (CH{sub 3}){sub 2}{sup {sm{underscore}bullet}}COH: (0.9--2.2) x 10{sup 8}M{sup {minus}1} s{sup {minus}1}), and C{sub 60} (e{sub aq}{sup {minus}}: 1.8 x 10{sup 10} M{sup {minus}1} s{sup {minus}1}; (CH{sub 3}){sub 2}{sup {sm{underscore}bullet}}COH: 2.7 x 10{sup 8} M{sup {minus}1} s{sup {minus}1}). Photolysis of 2a--2d gives rise to singlet excited state absorptions that closely resemble earlier observations for the pyrrolidine precursor, e.g., C{sub 60}(C{sub 3}H{sub 7}N){sub 2} (1a--1d) in deoxygenated toluene solutions. The triplet lifetimes of 2a--2d, as measured by nanosecond-resolved photolysis, are typically around 33 {mu}s, similar to the triplet lifetimes of truly monomeric fullerene solutions. Quenching experiments with diszabicyclooctane (DABCO), involving the triplet excited states of 2a--2d, yielded rate constants which vary between 2.5 x 10{sup 6} and 4.7 x 10{sup 6} M{sup {minus}1} s{sup {minus}1} and reveal a slow-down relative to C{sub 60}(7.4 x 10{sup 7} M{sup {minus}1} s{sup {minus}1}).« less

Method of making a non-lead hollow point bullet

DOEpatents

Vaughn, Norman L.; Lowden, Richard A.

2003-10-07

The method of making a non-lead hollow point bullet has the steps of a) compressing an unsintered powdered metal composite core into a jacket, b) punching a hollow cavity tip portion into the core, c) seating an insert, the insert having a hollow point tip and a tail protrusion, on top of the core such that the tail protrusion couples with the hollow cavity tip portion, and d) swaging the open tip of the jacket.

Enterococcus faecalis causing delayed spondylodiscitis in a case with retained intraspinal bullet

PubMed Central

Aiyer, Siddharth N.; Kanna, Rishi; Reddy, Srikanth; Rajasekaran, Shanmuganathan

2016-01-01

Delayed presentations have been reported following gunshot wounds (GSW) with retained intraspinal bullets due to migration of projectile or lead intoxication. We report on the rare occurrence of delayed pyogenic spondylodiscitis and neurological dysfunction following injury from low velocity GSW to the spine with a retained projectile. A 55-year-old male presented 4 months following GSW to the abdomen which resulted in colonic injury and L5 fracture. The patient was treated initially with ileo-transverse anastomosis, antibiotics, without retrieval of the bullet. He developed low back pain, claudication 4 months following GSW and investigations suggested a pyogenic spondylodiscitis at L5–S1. The patient was treated with surgical debridement of infective focus and stabilisation with definitive fusion being performed after an interval of 14 days. The biopsy of the lesion confirmed findings of spondylodiscitis and the culture isolated Enterococcus faecalis species. The patient was treated with antibiotics as per sensitivity and made an uneventful recovery over 4 weeks. The follow-up radiographs showed satisfactory healing at final follow up of 24 months. GSW with colonic perforation have higher incidence of infective complications however majority to these occur in the early postoperative period. This case report demonstrates the possibility of late onset presentation due to spinal infection occurring following colonic perforation with retained intraspinal bullet. PMID:28097252

High-speed video analysis of forward and backward spattered blood droplets

NASA Astrophysics Data System (ADS)

Comiskey, Patrick; Yarin, Alexander; Attinger, Daniel

2017-11-01

High-speed videos of blood spatter due to a gunshot taken by the Ames Laboratory Midwest Forensics Resource Center are analyzed. The videos used in this analysis were focused on a variety of targets hit by a bullet which caused either forward, backward, or both types of blood spatter. The analysis process utilized particle image velocimetry and particle analysis software to measure drop velocities as well as the distributions of the number of droplets and their respective side view area. This analysis revealed that forward spatter results in drops travelling twice as fast compared to backward spatter, while both types of spatter contain drops of approximately the same size. Moreover, the close-to-cone domain in which drops are issued is larger in forward spatter than in the backward one. The inclination angle of the bullet as it penetrates the target is seen to play a significant role in the directional preference of the spattered blood. Also, the aerodynamic drop-drop interaction, muzzle gases, bullet impact angle, as well as the aerodynamic wake of the bullet are seen to greatly influence the flight of the drops. The aim of this study is to provide a quantitative basis for current and future research on bloodstain pattern analysis. This work was financially supported by the United States National Institute of Justice (award NIJ 2014-DN-BXK036).

Janus "nano-bullets" for magnetic targeting liver cancer chemotherapy.

PubMed

Shao, Dan; Li, Jing; Zheng, Xiao; Pan, Yue; Wang, Zheng; Zhang, Ming; Chen, Qi-Xian; Dong, Wen-Fei; Chen, Li

2016-09-01

Tumor-targeted delivery of anti-cancer drugs with controlled drug release function has been recognized as a promising strategy for pursuit of increased chemotherapeutic efficacy and reduced adverse effects. Development of magnetic nanoparticulates as delivery carriers to accommodate cytotoxic drugs for liver cancer treatment has evoked immense interest with respect to their convenience in biomedical application. Herein, we engineered multifunctional Janus nanocomposites, characterized by a head of magnetic Fe3O4 and a body of mesoporous SiO2 containing doxorubicin (DOX) as "nano-bullets" (M-MSNs-DOX). This nanodrug formulation possessed nanosize with controlled aspect-ratio, defined abundance in pore structures, and superior magnetic properties. M-MSN-DOX was determined to induce selective growth inhibition to the cancer cell under magnetic field rather than human normal cells due to its preferable endocytosis by the tumor cells and pH-promoted DOX release in the interior of cancer cells. Ultimately, both subcutaneous and orthotropic liver tumor models in mice have demonstrated that the proposed Janus nano-bullets imposed remarkable suppression of the tumor growth and significantly reduced systematic toxicity. Taken together, this study demonstrates an intriguing targeting strategy for liver cancer treatment based on a novel Janus nano-bullet, aiming for utilization of nanotechnology to obtain safe and efficient treatment of liver cancer. Copyright © 2016 Elsevier Ltd. All rights reserved.

Organ models in wound ballistics: experimental study.

PubMed

Ozer, Mustafa Tahir; Oğünç, Gökhan; Eryilmaz, Mehmet; Yiğit, Taner; Menteş, Mustafa Oner; Dakak, Mehmet; Uzar, Ali Ihsan; Oner, Köksal

2007-01-01

Effects of various types and diameters of guns and related treatment principles are different. Our study was performed to experimentally demonstrate the effects of different gunshots in body tissues. 9x19 mm hand-gun and 7.62x51 mm G-3 infantry rifle were used in the study. Injury models were created through hand-gun and rifle shootings at isolated soft tissue, lower extremity, liver and intestine tissue simulants made of ballistic candle. High-speed cameras were used to capture 1000 frames per second. Images were examined and wound mechanisms were evaluated. It was observed that the colon content distributed more within the surrounding tissues by the rifle shootings comparing with hand-gun shootings and could be an infection source due to the large size of the cavity in the colon. Especially when the bullets hitting the bone were investigated, it was seen that much more tissue injury occurs with high speed bullets due to bullet deformation and fragmentation. However, no significant difference was found between the effect of hand-gun and rifle bullets passing through the extremity without hitting the bone. To know the type of the gun that caused the injury and its characteristics will allow to estimate severity and size of the injury before the treatment and to focus on different alternatives of treatment. Therefore, use of appropriate models is required in experimental studies.

Derivation of physical and optical properties of mid-latitude cirrus ice crystals for a size-resolved cloud microphysics model

DOE PAGES

Fridlind, Ann M.; Atlas, Rachel; van Diedenhoven, Bastiaan; ...

2016-06-10

Single-crystal images collected in mid-latitude cirrus are analyzed to provide internally consistent ice physical and optical properties for a size-resolved cloud microphysics model, including single-particle mass, projected area, fall speed, capacitance, single-scattering albedo, and asymmetry parameter. Using measurements gathered during two flights through a widespread synoptic cirrus shield, bullet rosettes are found to be the dominant identifiable habit among ice crystals with maximum dimension ( D max) greater than 100 µm. Properties are therefore first derived for bullet rosettes based on measurements of arm lengths and widths, then for aggregates of bullet rosettes and for unclassified (irregular) crystals. Derived bulletmore » rosette masses are substantially greater than reported in existing literature, whereas measured projected areas are similar or lesser, resulting in factors of 1.5–2 greater fall speeds, and, in the limit of large D max, near-infrared single-scattering albedo and asymmetry parameter ( g) greater by ~0.2 and 0.05, respectively. Furthermore, a model that includes commonly imaged side plane growth on bullet rosettes exhibits relatively little difference in microphysical and optical properties aside from ~0.05 increase in mid-visible g primarily attributable to plate aspect ratio. In parcel simulations, ice size distribution, and g are sensitive to assumed ice properties.« less

Gunshot injuries due to celebratory gun shootings.

PubMed

Ozdemir, Mevci; Unlü, Ağahan

2009-01-01

Traditional shooting with guns often occurs and leads to unwanted gunshot injuries in areas where celebrations are held. Such injuries have been classified as celebratory gun shooting injury in the international disease classification system. An 8-year-old female patient presented with respiratory arrest. The heartbeats normalized upon cardiopulmonary resuscitation. On physical examination, the only pathological finding was a skin defect measuring 1 x 1 cm on the midline and located 2 cm in front of the coronal suture. Cranial CT revealed a bone defect of 0.5 cm in the area 2 cm in front of the coronal suture on the midline, tetraventricular and extensive subarachnoid hemorrhage and parenchymal hematoma in the frontal area. It was initially thought to be a gunshot injury; however, on cranial CT, no bullet fragments or bullet exit hole was observed. A cervicothoracal direct graph was obtained and an image that might have been compatible with a bullet core was detected at Th 2-3 vertebra level. Although gunshot injuries are generally well- known, this may not be a very familiar topic for neurosurgeons. The primary aim of this report is to emphasize that a bullet round randomly fired into the air ascends in reverse direction to gravity and after reaching a zero point, it returns to the ground at a high velocity that facilitates its penetration into the skull according to a principal physics law.

Electric-field sensors for bullet detection systems

NASA Astrophysics Data System (ADS)

Vinci, Stephen; Hull, David; Ghionea, Simon; Ludwig, William; Deligeorges, Socrates; Gudmundsson, Thorkell; Noras, Maciej

2014-06-01

Research and experimental trials have shown that electric-field (E-field) sensors are effective at detecting charged projectiles. E-field sensors can likely complement traditional acoustic sensors, and help provide a more robust and effective solution for bullet detection and tracking. By far, the acoustic sensor is the most prevalent technology in use today for hostile fire defeat systems due to compact size and low cost, yet they come with a number of challenges that include multipath, reverberant environments, false positives and low signal-to-noise. Studies have shown that these systems can benefit from additional sensor modalities such as E-field sensors. However, E-field sensors are a newer technology that is relatively untested beyond basic experimental trials; this technology has not been deployed in any fielded systems. The U.S. Army Research Laboratory (ARL) has conducted live-fire experiments at Aberdeen Proving Grounds (APG) to collect data from E-field sensors. Three types of E-field sensors were included in these experiments: (a) an electric potential gradiometer manufactured by Quasar Federal Systems (QFS), (b) electric charge induction, or "D-dot" sensors designed and built by the Army Research Lab (ARL), and (c) a varactor based E-field sensor prototype designed by University of North Carolina-Charlotte (UNCC). Sensors were placed in strategic locations near the bullet trajectories, and their data were recorded. We analyzed the performance of each E-field sensor type in regard to small-arms bullet detection capability. The most recent experiment in October 2013 allowed demonstration of improved versions of the varactor and D-dot sensor types. Results of new real-time analysis hardware employing detection algorithms were also tested. The algorithms were used to process the raw data streams to determine when bullet detections occurred. Performance among the sensor types and algorithm effectiveness were compared to estimates from acoustics signatures and known ground truth. Results, techniques and configurations that might work best for a given sensor platform are discussed.

Muzzle-loading weapons discharging spherical lead bullets: two case studies and experimental simulation using a skin-soap composite model.

PubMed

Große Perdekamp, Markus; Braunwarth, Roland; Kromeier, Jan; Nadjem, Hadi; Pollak, Stefan; Thierauf, Annette

2013-07-01

In current forensic practice, fatal injuries from black powder guns are rare events. In contact and close-range shots, the intensity of GSR deposition (soot, powder particles) is much greater than that in shots with smokeless powder ammunition. The same applies to any burning effects from the combustion gases. Besides, a wad of felt interposed between the propellant and the lead bullet may enter the wound channel. Apart from these findings seen in close-range shots, another characteristic feature results from the mostly spherical shape of the missiles causing maximum tissue damage at the entrance site. Two fatal injuries inflicted with muzzle-loading weapons are reported. In the first case, suicide was committed with a cal. 11.6 mm miniature cannon by firing a contact shot to the back of the neck. In test shots using black powder (1 and 2 g) as propellant, the mean bullet velocity measured 1 m away from the weapon was 87.11 and 146.85 m/s, respectively, corresponding to a kinetic energy of 32.49 and 92.95 J, respectively. Contact test shots to composite models consisting of ballistic soap covered by pig skin at the entrance site were evaluated by CT and revealed cone-like cavitations along the bullet path as known from spherical missiles and penetration depths up to 25 cm. The second case presented deals with a homicidal close-range shot discharged from a muzzle-loading percussion pistol cal. .44. The skin around the entrance site (root of the nose) was densely covered with blackish soot and powder particles, whereas the eyebrows and eyelashes showed singeing of the hairs. The flattened bullet and the wad had got stuck under the scalp of the occipital region. In both cases, there was a disproportionally large zone of tissue destruction in the initial parts of the wound tracks.

Placement and Format of Risk Information on Direct-to-Consumer Prescription Drug Websites.

PubMed

Sullivan, Helen W; O'Donoghue, Amie C; Rupert, Douglas J; Willoughby, Jessica Fitts; Aikin, Kathryn J

2017-02-01

We investigated whether the location and format of risk information on branded prescription drug websites influence consumers' knowledge and perceptions of the drug's risks. Participants (Internet panelists with high cholesterol [n = 2,609] or seasonal allergies [n = 2,637]) were randomly assigned to view a website promoting a fictitious prescription drug for their condition. The website presented risk information at the bottom of the homepage, or at the bottom of the homepage with a signal above indicating that the risk information was located below, or on a linked secondary page. We also varied the format of risk information (paragraph, checklist, bulleted list, highlighted box). Participants then answered questions on risk recall and perceptions. Participants recalled fewer drug risks when the risks were placed on a secondary page. The signal had little effect, and risk information format did not affect outcomes. The location of risk information on prescription drug websites can affect consumer knowledge of drug risks; however, signals and special formatting may not be necessary for websites to adequately inform consumers about drug risks. We recommend that prescription drug websites maintain risk information on their homepages to achieve "fair balance" as required by the U.S. Food and Drug Administration.

Countering Overseas Threats: DOD and State Need to Address Gaps in Monitoring of Security Equipment Transferred to Lebanon

DTIC Science & Technology

2014-02-01

the ISF—night vision devices and ceramic plates for bullet proof vests . With regard to these two articles, we found the following: • INL consulted...However, INL did not consult the directorate about ceramic plates , which INL provided for bullet proof vests that it transferred to the ISF in...did not consult with the directorate about the ceramic plates , INL officials said that INL would contact the directorate in the future about any

[Spinal cord injury due to penetrating missiles].

PubMed

Ohry, Avi

2003-10-01

Gunshot wound of the spine is a major cause of spinal cord injury among US civilian population, members of the military armed conflict personnel, or civilians injured in terrorists attacks. The bullet fragments cause damage to the spinal cord even without penetrating the spinal canal. Concussive effects, heat, fractures or vascular injury may cause the neurological damage. Unfortunately, bullet or shrapnel removal or laminectomy do not change the prognosis. In this article we review the historical background, the Israeli experience, ballistic-forensic considerations, complications, treatment and prognosis.

Ballistics: a primer for the surgeon.

PubMed

Volgas, David A; Stannard, James P; Alonso, Jorge E

2005-03-01

The purpose of this paper is to review the literature on ballistics and to sort through the plethora of myth and popular opinion. The trauma surgeon is increasingly faced with gunshot wounds. Knowledge of ballistics is important to help in assessing the patterns of wounds that are seen. There are many factors that affect the flight of a bullet to its target. Many of these factors also affect the behaviour of the bullet after it strikes the target. It is primarily these factors that interest the surgeon.

[Peculiarities of forensic medical expertise of gunshot wounds inflicted through a bulletproof vest].

PubMed

Ozertskovskiĭ, L B; Tiurin, M V; Denisov, A V

2013-01-01

A series of experimental studies was conducted with the object of elucidating the mechanisms of the bullet after-penetration effect produced by a handgun shot into the armoured vest with special reference to the changes developing in the space behind the barrier. The application of the pulsed radiographic technique revealed a transient cavity the presence of which accounts for the injuries to soft tissues, bones, and internal organs in the projection of the bullet impact without damage to the armour plates.

Localization of Gunfire from Multiple Shooters (ARO Research Topic 5.2, Information Processing and Fusion; STIR Program)

DTIC Science & Technology

2016-03-03

for each shot, as well as "raw" data that includes time-of-arrival (TOA) and direction-of-arrival (DOA) of the muzzle blast (MB) produced by the weapon...angle of arrival, muzzle blast, shock wave, bullet deceleration, fusion REPORT DOCUMENTATION PAGE 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 10. SPONSOR...of the muzzle blast (MB) produced by the weapon and the shock wave (SW) produced by the supersonic bullet. The localization accuracy is improved

Lead-free hunting rifle ammunition: product availability, price, effectiveness, and role in global wildlife conservation.

PubMed

Thomas, Vernon George

2013-10-01

Proposals to end the use of lead hunting ammunition because of the established risks of lead exposure to wildlife and humans are impeded by concerns about the availability, price, and effectiveness of substitutes. The product availability and retail prices of different calibers of lead-free bullets and center-fire rifle ammunition were assessed for ammunition sold in the USA and Europe. Lead-free bullets are made in 35 calibers and 51 rifle cartridge designations. Thirty-seven companies distribute internationally ammunition made with lead-free bullets. There is no major difference in the retail price of equivalent lead-free and lead-core ammunition for most popular calibers. Lead-free ammunition has set bench-mark standards for accuracy, lethality, and safety. Given the demonstrated wide product availability, comparable prices, and the effectiveness of high-quality lead-free ammunition, it is possible to phase out the use of lead hunting ammunition world-wide, based on progressive policy and enforceable legislation.

Less-lethal hybrid ammunition wounds: a forensic assessment introducing bullet-skin-bone entity.

PubMed

de Freminville, Humbert; Prat, Nicolas; Rongieras, Frederic; Voiglio, Eric J

2010-09-01

Agencies all around the world now use less-lethal weapons with homogeneous missiles such as bean bag or rubber bullets. Contusions and sometimes significant morbidity have been reported. This study focuses on wounds caused by hybrid ammunition with the pathologists' flap-by-flap procedure. Twenty-four postmortem human subjects were used, and lesions caused on frontal, temporal, sternal, and left tibial regions by a 40-mm hybrid ammunition (33 g weight) were evaluated on various distance range. The 50% risk of fractures occurred at 79.2 m/sec on the forehead, 72.9 m/sec on the temporal, 72.5 m/sec on the sternum, and 76.7 m/sec on the tibia. Skin lesions were not predictors of bone fracture. There was no correlation between soft and bone tissue observed lesions and impact velocity (correlated to distance range). Lesions observed with hybrid ammunition were the result of bullet-skin-bone entity as the interaction of the projectile on skin and bone tissues.

The transition to non-lead rifle ammunition in Denmark: National obligations and policy considerations.

PubMed

Kanstrup, Niels; Thomas, Vernon G; Krone, Oliver; Gremse, Carl

2016-09-01

The issue of Denmark regulating use of lead-free rifle ammunition because of potential risks of lead exposure in wildlife and humans was examined from a scientific and objective policy perspective. The consequences of adopting or rejecting such regulation were identified. Denmark is obliged to examine this topic because of its national policy on lead reduction, its being a Party to the UN Bonn Convention on Migratory Species, and its role in protecting White-tailed Sea Eagles (Haliaeetus albicilla), a species prone to lead poisoning from lead ingestion. Lead-free bullets suited for deer hunting are available at comparable cost to lead bullets, and have been demonstrated to be as effective. National adoption of lead-free bullets would complete the Danish transition to lead-free ammunition use. It would reduce the risk of lead exposure to scavenging wildlife, and humans who might eat lead-contaminated wild game meat. Opposition from hunting organizations would be expected.

Assessment of a specifically developed bullet casing gun for the stunning of water buffaloes.

PubMed

Meichtry, Carmen; Glauser, Urs; Glardon, Matthieu; Ross, Steffen G; Lechner, Isabel; Kneubuehl, Beat P; Gascho, Dominic; Spadavecchia, Claudia; von Rotz, Alois; Stojiljkovic, Ana; Stoffel, Michael H

2018-01-01

Water buffaloes and cattle differ considerably with respect to the anatomy of the head. As a result, captive bolt stunners often fail to reliably produce adequate loss of consciousness in water buffaloes and, thus, do not fulfill animal welfare requirements. The goal of the present study was to assess and validate a new stunning device for water buffaloes meeting animal welfare and occupational safety requirements. The newly designed bullet casing gun uses .357Mag/10.2g hollow point bullets and has additional safety features. Its effectiveness and usability were assessed under practical conditions in an abattoir as based on widely accepted criteria. Stunning resulted in deep unconsciousness in 19 out of 20 water buffaloes. One 9-year old male did not immediately collapse. Except for very old bulls, the device presented herewith provides a means to stun water buffaloes of both sexes effectively and reliably while keeping occupational hazards to a minimum. Copyright © 2017 Elsevier Ltd. All rights reserved.

Annular flow diverter valve

DOEpatents

Rider, Robert L.

1980-01-01

A valve for diverting flow from the center of two concentric tubes to the annulus between the tubes or, operating in the reverse direction, for mixing fluids from concentric tubes into a common tube and for controlling the volume ratio of said flow consists of a toroidal baffle disposed in sliding engagement with the interior of the inner tube downstream of a plurality of ports in the inner tube, a plurality of gates in sliding engagement with the interior of the inner tube attached to the baffle for movement therewith, a servomotor having a bullet-shaped plug on the downstream end thereof, and drive rods connecting the servomotor to the toroidal baffle, the servomotor thereby being adapted to move the baffle into mating engagement with the bullet-shaped plug and simultaneously move the gates away from the ports in the inner tube and to move the baffle away from the bullet-shaped plug and simultaneously move the gates to cover the ports in the inner tube.

Significance of Crime Scene Visit by Forensic Pathologist in Cases of Atypical Firearm Injuries.

PubMed

Thejaswi, H T; Kumar, A; Krishna, K

2015-01-01

Deaths due to firearms are some of the interesting and contentious cases that a forensic pathologist/autopsy surgeon encounters in his practice. Whenever there is 'ambiguity' regarding the nature or sequence of events any unnatural deaths including those caused by firearms the practice of visiting crime scene should be encouraged especially in a country like India where autopsy surgeons often neglect it. Here we present a case report in which there were inconsistencies in the autopsy findings with the alleged history. The witnesses heard about four to six gunshot sounds, whereas only two spent cartridge cases were retrieved from the crime scene. Authors identified the atypical nature of firearm injuries sustained by the victims that were possible by just two bullets. Crime scene visit was undertaken where we discovered the possibility of the echo effect behind the production of four to six sounds. Further by using computer software program, positions of the gunman, victims and the bullet trajectory of the two bullets was created.

Fatal wounds sustained from "falling bullets": maintaining a high index of suspicion in a forensic setting.

PubMed

Rapkiewicz, Amy V; Shuman, Mark J; Hutchins, Kenneth D

2014-01-01

Celebratory gunfire injuries from "falling bullets" occur when guns are fired into the air during celebrations without realizing that this can cause serious injuries or even fatalities. Fatal celebratory gunfire injury is an uncommonly reported event in the continental United States. Our electronic database was queried for homicides occurring within days of July 4th and December 31st over a 14-year period. We describe two cases of fatal gunfire injury due to celebratory gunfire occurring during New Year's Eve in Southern Florida. The relevant literature is reviewed. These case reports illustrate that fatal gunfire injuries sustained from "falling bullets" may pose as an unexpected mimic to sudden natural deaths especially in patients with prior medical history. A high index of suspicion to recognize such injury is required particularly during holidays. 2013 American Academy of Forensic Sciences Published 2013. This article is a U.S. Government work and is in the public domain in the U.S.A.

Chromatic variation of soot soiling: a possible marker for gunshot wounds in burnt bone.

PubMed

Amadasi, Alberto; Merli, Daniele; Brandone, Alberto; Cattaneo, Cristina

2014-01-01

Soot soiling is a crucial forensic parameter around gunshot lesions. Carbonization, however, can severely alter human tissues and mimic such clues. This study aims at evaluating the survival of soot soiling even after carbonization in bone. A total of 36 bovine ribs (half fleshed and half defleshed) were shot with two types of bullet (both 9-mm; full metal-jacketed and unjacketed) with a near-contact range. With unjacketed bullets, the shot left in every case a clear, black, and roughly round soot stain around the entrance wound, whereas full metal-jacketed bullets left no signs of soot. Every specimen then underwent calcination in an oven at 800°C. The analysis of the charred samples clearly showed the survival of the soot soiling in both fleshed and bony samples, with a clear correspondence with the former position, but with a different color (yellow). Thus, soot soiling may survive, although with a different color, even after charring. © 2013 American Academy of Forensic Sciences.

Vertebral artery insult at the transverse foramina by gun shot wounds: report of two cases.

PubMed

Dalgic, Ali; Okay, Onder; Nacar, Osman; Daglioglu, Ergun; Pasaoglu, Lale; Belen, Deniz

2009-10-01

The vertebral artery (VA) is well protected through its course at the cervical transverse foramina and penetrating injuries of VA are mostly caused by gun shot wounds. The mechanism of injury in these wounds is described as the kinetic energy transferred by the bullet, which always depends on its mass and speed. Thus, the size of the pellet is the most important factor for the tissue damage, shock waves and direct injury. Civilian gun shot wounds are generally caused by low velocity firearms, In this report, we described two cases with cervical gunshot wound characterized with transverse foramina damage and VA insult. The first patient was assaulted by bullet that resulted in vertebral artery occlusion, whereas a smaller pellet was found in the second one and arterial flow was not influenced on the site of the damaged transverse foramina. Successful management of these injuries should include careful analysis of the bullet characteristics that is directly related to the intensity of damage.

The use of near-infrared photography to image fired bullets and cartridge cases.

PubMed

Stein, Darrell; Yu, Jorn Chi Chung

2013-09-01

An imaging technique that is capable of reducing glare, reflection, and shadows can greatly assist the process of toolmarks comparison. In this work, a camera with near-infrared (near-IR) photographic capabilities was fitted with an IR filter, mounted to a stereomicroscope, and used to capture images of toolmarks on fired bullets and cartridge cases. Fluorescent, white light-emitting diode (LED), and halogen light sources were compared for use with the camera. Test-fired bullets and cartridge cases from different makes and models of firearms were photographed under either near-IR or visible light. With visual comparisons, near-IR images and visible light images were comparable. The use of near-IR photography did not reveal more details and could not effectively eliminate reflections and glare associated with visible light photography. Near-IR photography showed little advantages in manual examination of fired evidence when it was compared with visible light (regular) photography. © 2013 American Academy of Forensic Sciences.

Measuring planetary field parameters by scattered "SSSS" from the Husar-5 Rover

NASA Astrophysics Data System (ADS)

Lang, A.; Kocsis, A.; Balaskó, D.; Csóka, B.; Molnar, B.; Sztojka, A.; Bejó, M.; Joób, Z.

2017-09-01

HUSAR-5 Rover reloaded: 2 years ago the Hunveyor-Husar Team in our school made yet a similar project. The ground idea was, we try to keep step with the main trends in the space research, in our recent case with the so called MSSM (Micro Sized Space- Mothership) and NPSDR (Nano, Pico Space Devices and Robots). [1]Of course, we do not want to scatter the smaller probe-cubes from a mothership, but from the Husar rover, and to do it on the planetary surface after landing. We have fabricated the rover with the ejecting tower and we have shown it on the EPSC 2015.The word "reloaded" means not only a new shape of the bullets, but a new mission with a new team. There are more pupils working in this project. The new bullets "SSSS" will be printed by a 3D printer.The microcontroller in bullets can be programmed with Arduino, so the "new generation" is able to do it.

Two bullets to the head and an early winter: fate permits Kutuzov to defeat Napoleon at Moscow.

PubMed

Kushchayev, Sergiy V; Belykh, Evgenii; Fishchenko, Yakiv; Salei, Aliaksei; Teytelboym, Oleg M; Shabaturov, Leonid; Cruse, Mark; Preul, Mark C

2015-07-01

General Mikhail Kutuzov (circa 1745-1813) brilliantly repelled Napoleon's invasion of Russia. Honored as a national hero and a savior of Russia, Kutuzov has a unique medical story. He was shot in the head twice while fighting the Turks (1774 and 1788) and survived the serious injuries seemingly against all odds. The first bullet "ran through the head from one temple to the other behind both eyes." The second bullet entered the cheek, destroyed upper teeth, traveled through the head, and exited the occiput. Massot, a French surgeon with the Russian army, wrote after treating Kutuzov's seemingly two mortal wounds: "It must be believed that fate appoints Kutuzov to something great, because he was still alive after two injuries, a death sentence by all the rules of medical science." Aided by Massot's expert surgical technique, Kutuzov lived to become intimately engaged in events that altered world history. His health did, however, suffer significant effects due to the bullet wounds. In 1812, as Napoleon's Grande Armée approached, Kutuzov realized he could not confront Napoleon and he strategically retreated from Moscow, submitting the French to the harsh winter and Russian cavalry. Napoleon's devastated army retreated to Paris, and Kutuzov became the personification of Russian spirit and character. Kutuzov's survival of two nearly mortal head wounds created the legends, additional mystery, and drama surrounding him, not the least astonishing of which was the skilled neurosurgical care that probably saved his life.

Angled shots onto body armour using 9 mm ammunition: the effect on potential blunt injury.

PubMed

Lyall, Alison; Carr, D J; Lankester, C; Malbon, C

2017-02-01

Some military specialists wear body armour that is more similar to police armour and provides protection from ammunition fired from pistols. During ballistic testing, these armours are mounted on a standardised type of modelling clay and the back face signature (BFS; depth of depression) formed as a result of the non-perforating impact event on to the armour is measured. This study investigated the effect of impact angle on the BFS and on the deformation of the bullet. Two commonly worn types of armour (HG1/A+KR1 and HG1+KR1) were considered that provide protection from pistol ammunition and sharp weapons. Armours were tested against two types of pistol ammunition (9 mm full metal jacket and 9 mm hollow point) at eight different impact angles (0°, 15°, 30°, 45°, 60°, 70°, 75° and 80°). Increased impact angles resulted in smaller BFSs. Impact angle also affected whether bullets were retained in the armour; as the impact angle increased, the probability of a round exiting the side of the armour increased. Bullet deformation was affected by impact angle. Understanding the deformation of bullets may assist with recreating a shooting incident and interpreting forensic evidence. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

A U.S. Biodefense Strategy Primer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Poulin, D

2009-05-11

The anthrax mailings that followed the attacks of September 11, 2001 highlighted the need for a comprehensive national strategy to prevent, prepare for, respond to, and mitigate the effects of biological attacks. The goal of U.S. biodefense strategy is to reduce the likelihood of a future biological event, improve overall U.S. public health security, and minimize the economic and social disruption of a biological incident. Presidential communications, federal legislation, and executive agency planning documents provide the foundation for this strategy. Central to current U.S. biodefense strategy is the 2004 Homeland Security Presidential Directive (HSPD) 10, Biodefense for the 21st Century,more » which states that ''the United States will use all means necessary to prevent, protect against, and mitigate biological weapons attacks perpetrated against our homeland and our global interests.'' HSPD-10 also sets forth four pillars of U.S. biodefense: {sm_bullet} Threat awareness includes timely, accurate, and relevant intelligence, threat assessment, and the anticipation of future threats. {sm_bullet} Prevention and protection involve continuing and expanding efforts to limit access to agents, technologies, and knowledge to certain groups and countries as well as protecting critical infrastructure from the effects of biological attacks. {sm_bullet} Surveillance and detection provide early warning or recognition of biological attacks to permit a timely response and mitigation of consequences as well as attribution. {sm_bullet} Response and recovery include pre-attack planning and preparedness, capabilities to treat casualties, risk communications, physical control measures, medical countermeasures, and decontamination capabilities.« less

Changing Abundance of Magnetofossil Morphologies in Pelagic Red Clay Around Minamitorishima, Western North Pacific

NASA Astrophysics Data System (ADS)

Usui, Yoichi; Yamazaki, Toshitsugu; Saitoh, Masafumi

2017-12-01

Recent investigations have discovered an unexpected abundance of magnetofossils in oxic pelagic red clays. These have potential to serve as paleoenvironmental tracers in otherwise nonfossiliferous sediments. Here, we report on variations in the abundance and morphology of magnetofossils in red clay from the western North Pacific. Magnetic measurements revealed that magnetofossils dominate the magnetic mineral assemblage of the sediments. An endmember analysis of isothermal remanent magnetization acquisition curves, supplemented by an analysis of S ratios, indicates that the magnetic assemblage can be unmixed into three endmembers, two corresponding to magnetofossils and one to terrigenous magnetic minerals. Direct counting of magnetofossil morphologies under a transmission electron microscope shows that the two magnetofossil endmembers differentiate equant magnetofossils and bullet-shaped magnetofossils, respectively. The stratigraphic variation of the endmember contributions revealed that the equant magnetofossils are dominant for the most part, while an interval at around 7 m in core depth shows higher abundance of the bullet-shaped magnetofossils. This may reflect enhanced organic carbon flux to the sediments. The organic carbon content is low throughout the sediments, and it does not show any change corresponding to the increase of bullet-shaped magnetofossils, pointing at extensive remineralization of the organic carbon. On the basis of lithostratigraphic correlation to nearby drilling sites, we tentatively estimate the age of the bullet-shaped magnetofossil increase as sometime between ˜75 and 25 Ma. These results suggest that environmental information can be obtained from magnetofossils in pelagic red clay.

Magnetic nanoparticle-induced hyperthermia with appropriate payloads: Paul Ehrlich's "magic (nano)bullet" for cancer theranostics?

PubMed

Datta, N R; Krishnan, S; Speiser, D E; Neufeld, E; Kuster, N; Bodis, S; Hofmann, H

2016-11-01

Effective multimodal cancer management requires the optimal integration of diagnostic and therapeutic modalities. Radiation therapy, chemotherapy and immunotherapy, alone or in combination, are integral parts of various cancer treatment protocols. Hyperthermia at 39-45°C is a potent radiosensitiser and has been shown to improve therapeutic outcomes in various tumours through its synergy with chemotherapy. Gene silencing approaches, using small interfering RNAs and microRNAs, are also being explored in clinical trials in oncology. The rapid developments in multifunctional nanoparticles provide ample opportunities to integrate both diagnostic and therapeutic modalities into a single effective cancer "theranostic" vector. Nanoparticles could extravasate passively into the tumour tissues in preference to the adjacent normal tissues by capitalizing on the enhanced permeability and retention effect. Tumour targeting might be further augmented by conjugating tumour-specific peptides and antibodies onto the surface of these nanoparticles or by activation through electromagnetic radiations, laser or ultrasound. Magnetic nanoparticles can induce hyperthermia in the presence of an alternating magnetic field, thereby multifunctionally with tumour-specific payloads empowering tumour specific radiotheranostics (for both imaging and radiotherapy), chemotherapy drug delivery, immunotherapy and gene silencing therapy. Such a (nano)bullet could realise the "magic bullet" conceived by Paul Ehrlich more than a century ago. This article discusses the various aspects of this "magic (nano)bullet" and the challenges that need to be addressed to usher in this new paradigm in modern cancer diagnostics and therapeutics. Copyright © 2016 Elsevier Ltd. All rights reserved.

Spatial scale, means and gradients of hydrographic variables define pelagic seascapes of bluefin and bullet tuna spawning distribution.

PubMed

Alvarez-Berastegui, Diego; Ciannelli, Lorenzo; Aparicio-Gonzalez, Alberto; Reglero, Patricia; Hidalgo, Manuel; López-Jurado, Jose Luis; Tintoré, Joaquín; Alemany, Francisco

2014-01-01

Seascape ecology is an emerging discipline focused on understanding how features of the marine habitat influence the spatial distribution of marine species. However, there is still a gap in the development of concepts and techniques for its application in the marine pelagic realm, where there are no clear boundaries delimitating habitats. Here we demonstrate that pelagic seascape metrics defined as a combination of hydrographic variables and their spatial gradients calculated at an appropriate spatial scale, improve our ability to model pelagic fish distribution. We apply the analysis to study the spawning locations of two tuna species: Atlantic bluefin and bullet tuna. These two species represent a gradient in life history strategies. Bluefin tuna has a large body size and is a long-distant migrant, while bullet tuna has a small body size and lives year-round in coastal waters within the Mediterranean Sea. The results show that the models performance incorporating the proposed seascape metrics increases significantly when compared with models that do not consider these metrics. This improvement is more important for Atlantic bluefin, whose spawning ecology is dependent on the local oceanographic scenario, than it is for bullet tuna, which is less influenced by the hydrographic conditions. Our study advances our understanding of how species perceive their habitat and confirms that the spatial scale at which the seascape metrics provide information is related to the spawning ecology and life history strategy of each species.

Fixation Strength of Polyetheretherketone Sheath-and-Bullet Device for Soft Tissue Repair in the Foot and Ankle.

PubMed

Christensen, Jay; Fischer, Brian; Nute, Michael; Rizza, Robert

Tendon transfers are often performed in the foot and ankle. Recently, interference screws have been a popular choice owing to their ease of use and fixation strength. Considering the benefits, one disadvantage of such devices is laceration of the soft tissues by the implant threads during placement that potentially weaken the structural integrity of the grafts. A shape memory polyetheretherketone bullet-in-sheath tenodesis device uses circumferential compression, eliminating potential damage from thread rotation and maintaining the soft tissue orientation of the graft. The aim of this study was to determine the pullout strength and failure mode for this device in both a synthetic bone analogue and porcine bone models. Thirteen mature bovine extensor tendons were secured into ten 4.0 × 4.0 × 4.0-cm cubes of 15-pound per cubic foot solid rigid polyurethane foam bone analogue models or 3 porcine femoral condyles using the 5 × 20-mm polyetheretherketone soft tissue anchor. The bullet-in-sheath device demonstrated a mean pullout of 280.84 N in the bone analog models and 419.47 N in the porcine bone models. (p = .001). The bullet-in-sheath design preserved the integrity of the tendon graft, and none of the implants dislodged from their original position. Copyright © 2017 The American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

Galaxy Cluster Bulk Flows and Collision Velocities in QUMOND

NASA Astrophysics Data System (ADS)

Katz, Harley; McGaugh, Stacy; Teuben, Peter; Angus, G. W.

2013-07-01

We examine the formation of clusters of galaxies in numerical simulations of a QUMOND cosmogony with massive sterile neutrinos. Clusters formed in these exploratory simulations develop higher velocities than those found in ΛCDM simulations. The bulk motions of clusters attain ~1000 km s-1 by low redshift, comparable to observations whereas ΛCDM simulated clusters tend to fall short. Similarly, high pairwise velocities are common in cluster-cluster collisions like the Bullet Cluster. There is also a propensity for the most massive clusters to be larger in QUMOND and to appear earlier than in ΛCDM, potentially providing an explanation for "pink elephants" like El Gordo. However, it is not obvious that the cluster mass function can be recovered.

Lead poisoning due to bullets lodged in the human body.

PubMed

Gerstner Garcés, Juan Bernardo; Manotas Artuz, Rafael Ignacio

2012-07-01

With the increased violence and use of firearms in Colombia, we may see more cases of lead poisoning in our environment, and must be prepared to diagnose and treat them. Subtle signs and symptoms as unexplained anemia, gastro-intestinal discomfort and abdominal cramps, as well as severe signs such as changes in behavior and neurological status, nephropathy, and unexplained death, may be associated with a history of gunshot wounds and bullets in the human body. We must offer the patient knowledge and management strategies of pathology.

Passive Reactive Berm (PRBerm) to Provide Low Maintenance Lead Containment at Active Small Arms Firing Ranges

DTIC Science & Technology

2012-01-01

body, dissolved Pb forms precipitates of Pb hydroxide [Pb(OH)2], Pb carbonate [PbCO3, cerrusite], or basic Pb carbonate [Pb3(OH)2 ( CO3 )2...along with a potential seed crystal for heterogeneous nucleation of Pb-pyromorphites (Wright et al., 2004). Depending on the presence of certain... single steel bullet trap. The sand or dirt berm is the oldest and most basic type of bullet trap. It uses the mass of the berm itself to stop and

Utilization of the Safe Surgical Dislocation Approach of the Hip to Retrieve a Bullet from the Femoral Head

PubMed Central

Delaney, Ruth; Albright, Maurice; Rebello, Gleeson

2011-01-01

Retained intra-articular missiles from low-velocity handguns can lead to mechanical arthritis, synovitis, and lead toxicity. Various surgical approaches have been described to extract such foreign bodies from the hip joint. We present the case of a 17-year-old male in which the surgical dislocation approach was utilized to retrieve a bullet from the femoral head with a good short-term outcome. This case represents a rare application of the surgical hip dislocation approach for an unusual trauma. PMID:23198205

Lead poisoning due to bullets lodged in the human body

PubMed Central

Manotas Artuz, Rafael Ignacio

2012-01-01

With the increased violence and use of firearms in Colombia, we may see more cases of lead poisoning in our environment, and must be prepared to diagnose and treat them. Subtle signs and symptoms as unexplained anemia, gastro-intestinal discomfort and abdominal cramps, as well as severe signs such as changes in behavior and neurological status, nephropathy, and unexplained death, may be associated with a history of gunshot wounds and bullets in the human body. We must offer the patient knowledge and management strategies of pathology. PMID:24893198

Lightening Body Armor: Arroyo Support to the Army Response to Section 125 of the National Defense Authorization Act for Fiscal Year 2011

DTIC Science & Technology

2012-01-01

nel from fragmenting munitions, and the addition of SAPI will successfully defend against AK-47 ball ammunition. The ESAPI and XSAPI plates were...d ) Frequency of incidents of firefights 7.62 x 39mm ball Fragmenting munitions Threat X Threat Y Threat E Threat F Threat A Threat C Threat D...the threat in Afghani- stan today is primarily fragmenting munitions, 7.62mm x 39 ball bullets, and 7.62mm x 54R ball bullets. Current body armor

Protective ability of the standard U.S. Military Personal Armor System, Ground Troops (PASGT) fragmentation vest against common small arms projectiles.

PubMed

Roberts, G K; Bullian, M E

1993-08-01

This study analyzes the ballistic protection provided by the standard U.S. Military Personal Armor System, Ground Troops fragmentation vest against threats from handgun and shotgun projectiles. Damage assessment was conducted using 10% ordnance gelatin, a tissue simulant which has been proven to have a close correlation with living tissue. The standard fragmentation vest was shown to provide protection from commonly encountered handgun bullets and shotgun pellets, but not from shotgun slugs or center-fire rifle bullets.

Non-lead hollow point bullet

DOEpatents

Vaughn, Norman L.; Lowden, Richard A.

2003-04-15

The non-lead hollow point bullet of the instant invention comprises a mixed construction slug further comprising, a monolithic metal insert having a tapered (preferred conical) hollow point tip and a tapered (preferred conical) tail protrusion, and an unsintered powdered metal composite core in tandem alignment with the insert. The core has a hollow tapered (preferred conical) cavity tip portion coupled with the tapered (preferred conical) tail protrusion on the insert. An open tip jacket envelops at least a portion of the insert and the core. The jacket is swaged at the open tip.

Collaborative Management of Missile Injury to Right Ventricle and Subsequent Pulmonary Embolization.

PubMed

Sibona, Agustin; Smith, Jason C; Srikureja, Daniel P; Sharma, Rahul; Mascetti, Carin; Razzouk, Anees J; Rabkin, David G

2018-05-30

Pulmonary embolization of a missile is a rare phenomenon. Localization after embolization can be confounding and there is no consensus on management. We report a case of a gunshot wound to the chest with preoperative and initial intraoperative imaging localizing the bullet to the right ventricle but a negative intraoperative exploration of the right-sided cardiac chambers. Intraoperative fluoroscopy allowed for immediate localization of the bullet to the hilum of the left lung with subsequent endovascular retrieval. Copyright © 2018. Published by Elsevier Inc.

Lead contamination of golden eagles Aquila chrysaetos within the range of the California condor Gymnogyps californianus

USGS Publications Warehouse

Bloom, P.H.; Scott, J.M.; Pattee, O.H.; Smith, M.R.; Meyburg, B-U.; Chancellor, R.D.

1989-01-01

Blood samples were taken from 66 golden eagles from June 1985 to January 1986 and analyzed for their lead content. Thirty-nine percent had blood lead levels greater than 0.2 ppm, indicating exposure to environmental lead. Within the exposed group, 3 had blood levels exceeding 0.6 ppm and one exceeded 1.0 ppm. These data suggest that lead, probably in the form of shot, bullets, or bullet fragments, poses a hazard to scavenging birds within the range of the California condor.

Trace metal analysis by laser ablation-inductively coupled plasmamass spectrometry and x-ray K-edge densitometry of forensic samples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berry, Jonna Elizabeth

This dissertation describes a variety of studies on the determination of trace elements in samples with forensic importance. Laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) was used to determine the trace element composition of numerous lipstick samples. Lipstick samples were determined to be homogeneous. Most lipstick samples of similar colors were readily distinguishable at a 95% confidence interval based on trace element composition. Numerous strands of a multi-strand speaker cable were analyzed by LA-ICP-MS. The strands in this study are spatially heterogeneous in trace element composition. In actual forensic applications, the possibility of spatial heterogeneity must be considered, especially in casesmore » where only small samples (e.g., copper wire fragments after an explosion) are available. The effects of many unpredictable variables, such as weather, temperature, and human activity, on the retention of gunshot residue (GSR) around projectile wounds were assessed with LAICP- MS. Skin samples around gunshot and stab wounds and larvae feeding in and around the wounds on decomposing pig carcasses were analyzed for elements consistent with GSR (Sb, Pb, Ba, and Cu). These elements were detected at higher levels in skin and larvae samples around the gunshot wounds compared to the stab wounds for an extended period of time throughout decomposition in both a winter and summer study. After decomposition, radiographic images of the pig bones containing possible damage from bullets revealed metallic particles embedded within a number of bones. Metallic particles within the bones were analyzed with x-ray, K-edge densitometry and determined to contain lead, indicating that bullet residue can be retained throughout decomposition and detected within bones containing projectile trauma.« less

Accuracy and Repeatability of Trajectory Rod Measurement Using Laser Scanners.

PubMed

Liscio, Eugene; Guryn, Helen; Stoewner, Daniella

2017-12-22

Three-dimensional (3D) technologies contribute greatly to bullet trajectory analysis and shooting reconstruction. There are few papers which address the errors associated with utilizing laser scanning for bullet trajectory documentation. This study examined the accuracy and precision of laser scanning for documenting trajectory rods in drywall for angles between 25° and 90°. The inherent error range of 0.02°-2.10° was noted while the overall error for laser scanning ranged between 0.04° and 1.98°. The inter- and intraobserver errors for trajectory rod placement and virtual trajectory marking showed that the range of variation for rod placement was between 0.1°-1° in drywall and 0.05°-0.5° in plywood. Virtual trajectory marking accuracy tests showed that 75% of data values were below 0.91° and 0.61° on azimuth and vertical angles, respectively. In conclusion, many contributing factors affect bullet trajectory analysis, and the use of 3D technologies can aid in reduction of errors associated with documentation. © 2017 American Academy of Forensic Sciences.

Removal of uranium from soil sample digests for ICP-OES analysis of trace metals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foust, R.D. Jr.; Bidabad, M.

1996-10-01

An analytical procedure has been developed to quantitatively remove uranium from soil sample digests, permitting ICP-OES analysis of trace metals. The procedure involves digesting a soil sample with standard procedures (EPA SW-846, Method 3050), and passing the sample digestate through commercially available resin (U/TEVA{sm_bullet}Spec, Eichrom Industries, Inc.) containing diarryl amylphosphonate as the stationary phase. Quantitative removal of uranium was achieved with soil samples containing up to 60% uranium, and percent recoveries averaged better than 85% for 9 of the 10 metals evaluated (Ag, As, Cd. Cr, Cu, Ni, Pb, Se and Tl). The U/TEVA{sm_bullet}Spec column was regenerated by washing withmore » 200 mL of a 0.01 M oxalic acid/0.02 M nitric acid solution, permitting re-use of the column. GFAAS analysis of a sample spiked with 56.5% uranium, after treatment of the digestate with a U/TEVA{sm_bullet}Spec resin column, resulted in percent recoveries of 97% or better for all target metals.« less

To drink or grasp? How bullet ants ( Paraponera clavata) differentiate between sugars and proteins in liquids

NASA Astrophysics Data System (ADS)

Jandt, Jennifer; Larson, Hannah K.; Tellez, Peter; McGlynn, Terrence P.

2013-12-01

Flexibility in behavior can increase the likelihood that a forager may respond optimally in a fluctuating environment. Nevertheless, physiological or neuronal constraints may result in suboptimal responses to stimuli. We observed foraging workers of the giant tropical ant (also referred to as the "bullet ant"), Paraponera clavata, as they reacted to liquid solutions with varying concentrations of sugar and protein. We show that when protein/sucrose concentration is high, many bullet ants will often try to grasp at the droplet, rather than gather it by drinking. Because P. clavata actively hunt for prey, fixed action patterns and rapid responses to protein may be adaptively important, regardless of the medium in which it is presented. We conclude that, in P. clavata, food-handling decisions are made in response to the nutrient content of the food rather than the texture of the food. Further, we suggest that colonies that maintain a mixture of individuals with consistent fixed or flexible behavioral responses to food-handling decisions may be better adapted to fluctuating environmental conditions, and we propose future studies that could address this.

Generation and control of sound bullets with a nonlinear acoustic lens.

PubMed

Spadoni, Alessandro; Daraio, Chiara

2010-04-20

Acoustic lenses are employed in a variety of applications, from biomedical imaging and surgery to defense systems and damage detection in materials. Focused acoustic signals, for example, enable ultrasonic transducers to image the interior of the human body. Currently however the performance of acoustic devices is limited by their linear operational envelope, which implies relatively inaccurate focusing and low focal power. Here we show a dramatic focusing effect and the generation of compact acoustic pulses (sound bullets) in solid and fluid media, with energies orders of magnitude greater than previously achievable. This focusing is made possible by a tunable, nonlinear acoustic lens, which consists of ordered arrays of granular chains. The amplitude, size, and location of the sound bullets can be controlled by varying the static precompression of the chains. Theory and numerical simulations demonstrate the focusing effect, and photoelasticity experiments corroborate it. Our nonlinear lens permits a qualitatively new way of generating high-energy acoustic pulses, which may improve imaging capabilities through increased accuracy and signal-to-noise ratios and may lead to more effective nonintrusive scalpels, for example, for cancer treatment.

Generation and control of sound bullets with a nonlinear acoustic lens

PubMed Central

Spadoni, Alessandro; Daraio, Chiara

2010-01-01

Acoustic lenses are employed in a variety of applications, from biomedical imaging and surgery to defense systems and damage detection in materials. Focused acoustic signals, for example, enable ultrasonic transducers to image the interior of the human body. Currently however the performance of acoustic devices is limited by their linear operational envelope, which implies relatively inaccurate focusing and low focal power. Here we show a dramatic focusing effect and the generation of compact acoustic pulses (sound bullets) in solid and fluid media, with energies orders of magnitude greater than previously achievable. This focusing is made possible by a tunable, nonlinear acoustic lens, which consists of ordered arrays of granular chains. The amplitude, size, and location of the sound bullets can be controlled by varying the static precompression of the chains. Theory and numerical simulations demonstrate the focusing effect, and photoelasticity experiments corroborate it. Our nonlinear lens permits a qualitatively new way of generating high-energy acoustic pulses, which may improve imaging capabilities through increased accuracy and signal-to-noise ratios and may lead to more effective nonintrusive scalpels, for example, for cancer treatment. PMID:20368461

Ballistic impacts on an anatomically correct synthetic skull with a surrogate skin/soft tissue layer.

PubMed

Mahoney, Peter; Carr, Debra; Arm, Richard; Gibb, Iain; Hunt, Nicholas; Delaney, Russ J

2018-03-01

The aim of this work was to further develop a synthetic model of ballistic head injury by the addition of skin and soft tissue layers to an anatomically correct polyurethane skull filled with gelatine 10% by mass. Six head models were impacted with 7.62 x 39 mm full metal jacket mild steel core (FMJ MSC) bullets with a mean velocity of 652 m/s. The impact events were filmed with high-speed cameras. The models were imaged pre- and post-impact using computed tomography. The models were assessed post impact by two experienced Home Office pathologists and the images assessed by an experienced military radiologist. The findings were scored against real injuries. The entry wounds, exit wounds and fracture patterns were scored positively, but the synthetic skin and soft tissue layer was felt to be too extendable. Further work is ongoing to address this.

The Dimanganese(II) Site of Bacillus subtilis Class Ib Ribonucleotide Reductase

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boal, Amie K.; Cotruvo, Jr., Joseph A.; Stubbe, JoAnne

2014-10-02

Class Ib ribonucleotide reductases (RNRs) use a dimanganese-tyrosyl radical cofactor, Mn{sub 2}{sup III}-Y{sm_bullet}, in their homodimeric NrdF ({beta}2) subunit to initiate reduction of ribonucleotides to deoxyribonucleotides. The structure of the Mn{sub 2}{sup II} form of NrdF is an important component in understanding O{sub 2}-mediated formation of the active metallocofactor, a subject of much interest because a unique flavodoxin, NrdI, is required for cofactor assembly. Biochemical studies and sequence alignments suggest that NrdF and NrdI proteins diverge into three phylogenetically distinct groups. The only crystal structure to date of a NrdF with a fully ordered and occupied dimanganese site is thatmore » of Escherichia coli Mn{sub 2}{sup II}-NrdF, prototypical of the enzymes from actinobacteria and proteobacteria. Here we report the 1.9 {angstrom} resolution crystal structure of Bacillus subtilis Mn{sub 2}{sup II}-NrdF, representative of the enzymes from a second group, from Bacillus and Staphylococcus. The structures of the metal clusters in the {beta}2 dimer are distinct from those observed in E. coli Mn{sub 2}{sup II}-NrdF. These differences illustrate the key role that solvent molecules and protein residues in the second coordination sphere of the Mn{sub 2}{sup II} cluster play in determining conformations of carboxylate residues at the metal sites and demonstrate that diverse coordination geometries are capable of serving as starting points for Mn{sub 2}{sup III}-Y{sm_bullet} cofactor assembly in class Ib RNRs.« less

Penetration of Face Hardened Bullet Proof Steel by Yawed .50 cal. AP (armor Piercing) Bullets at O deg. Obliquity

DTIC Science & Technology

1943-07-09

for sevarad platos a o"’l i~u.Li * DAVID I. 157"iCYI, Copy, tos 81*,AI’C Doa ’* (dir*et) B3uiad Deec !’Alb (diroot) Lt, Gseauque 10 tJt. Jolmson- E...2233 10 CP N1 1/21’ Hole. 42 2265 55 PP NH 2" Pin S. 43 2260 53 PP NH 3" x 4" Crack. 44 2240 25 PP RJ HB No Crack. 45 2252 27 PP RJ RB No Cracks, 46

Relapsing pneumonia due to a migrating intrathoracic foreign body in a World War II veteran shot 53 years ago.

PubMed

Langer, D; Petermann, C; Lübbers, H; Lankisch, P G

1999-04-01

In the great majority of cases of long-standing intrathoracic foreign bodies, patients are asymptomatic. However, symptoms may occur years later from the migration of the foreign body. We report on a 70-year-old patient who developed relapsing pneumonia due to obstruction of a bronchial branch of the left apical group by a migrating infantry bullet impacting 53 years ago. This was not diagnosed until the second attack of pneumonia in 1998. The bullet remains were removed bronchoscopically and the pneumonia resolved completely without further complications.

Caffeine citrate - Is it a silver bullet in neonatology?

PubMed

Shrestha, Bikash; Jawa, Gaurav

2017-10-01

Caffeine citrate is one of the most prescribed drug in the present day NICU for apnea. Its efficacy, tolerability, wide therapeutic index and safety margin has made it the drug of choice among the methylxanthines. Its therapeutic uses in apnea of prematurity, mechanical ventilation, bronchopulmonary dysplasia has made it a "silver bullet" in neonatology. However, there are still controversies surrounding this drug. This review is aimed to update the reader about the basic pharmacology, current therapeutic uses, adverse effects, controversies as well as present and future research of caffeine. Copyright © 2017. Published by Elsevier B.V.

GALAXY CLUSTER BULK FLOWS AND COLLISION VELOCITIES IN QUMOND

DOE Office of Scientific and Technical Information (OSTI.GOV)

Katz, Harley; McGaugh, Stacy; Teuben, Peter

We examine the formation of clusters of galaxies in numerical simulations of a QUMOND cosmogony with massive sterile neutrinos. Clusters formed in these exploratory simulations develop higher velocities than those found in {Lambda}CDM simulations. The bulk motions of clusters attain {approx}1000 km s{sup -1} by low redshift, comparable to observations whereas {Lambda}CDM simulated clusters tend to fall short. Similarly, high pairwise velocities are common in cluster-cluster collisions like the Bullet Cluster. There is also a propensity for the most massive clusters to be larger in QUMOND and to appear earlier than in {Lambda}CDM, potentially providing an explanation for ''pink elephants''more » like El Gordo. However, it is not obvious that the cluster mass function can be recovered.« less

DynaMed Plus®: An Evidence-Based Clinical Reference Resource.

PubMed

Charbonneau, Deborah H; James, LaTeesa N

2018-01-01

DynaMed Plus ® from EBSCO Health is an evidence-based tool that health professionals can use to inform clinical care. DynaMed Plus content undergoes a review process, and the evidence is synthesized in detailed topic overviews. A unique three-level rating scale is used to assess the quality of available evidence. Topic overviews summarize current evidence and provide recommendations to support health providers at the point-of-care. Additionally, DynaMed Plus content can be accessed via a desktop computer or mobile platforms. Given this, DynaMed Plus can be a time-saving resource for health providers. Overall, DynaMed Plus provides evidence summaries using an easy-to-read bullet format, and the resource incorporates images, clinical calculators, patient handouts, and practice guidelines in one place.

The benefit of a tough skin: bullet holes, weathering and the preservation of heritage

PubMed Central

Gomez-Heras, M.; Brassey, C.; Green, O.; Blenkinsop, T.

2017-01-01

Projectile damage to building stone is a widespread phenomenon. Sites damaged 100 years ago during the First World War still see daily use, while in a more contemporary setting numerous reports show the damage to buildings in Babylon, Mosul and Palmyra. While research has been carried out on the long-term effects of conflict such as fire damage, little is known about the protracted damage sustained through the impact of bullets, shrapnel and other metal projectiles outside of the field of engineering focused on ceramics and metals. To investigate alterations to mineral structure caused by projectile damage, impacts were created in medium-grained, well-compacted, mesoporous sandstone samples using 0.22 calibre lead bullets shot at a distance of 20 m. Half these samples were treated with a surface consolidant (Wacker OH 100), to mimic natural cementation of the rock surface. These samples were then tested for changes to surface hardness and moisture movement during temperature cycles of 15–65°C. Petrographic thin section analysis was carried out to investigate the micro-scale deformation associated with high-speed impact. The results surprisingly show that stress build-up behind pre-existing cementation of the surface, as found in heritage sites that have been exposed to moisture and temperature fluctuations for longer periods of time, can be alleviated with a bullet impact. However, fracture networks and alteration of the mineral matrices still form a weak point within the structure, even at a relatively low impact calibre. This initial study illustrates the need for geomorphologists, geologists, engineers and heritage specialists to work collectively to gain further insights into the long-term impact of higher calibre armed warfare on heritage deterioration. PMID:28386411

Combat-related intradural gunshot wound to the thoracic spine: significant improvement and neurologic recovery following bullet removal.

PubMed

Louwes, Thijs M; Ward, William H; Lee, Kendall H; Freedman, Brett A

2015-02-01

The vast majority of combat-related penetrating spinal injuries from gunshot wounds result in severe or complete neurological deficit. Treatment is based on neurological status, the presence of cerebrospinal fluid (CSF) fistulas, and local effects of any retained fragment(s). We present a case of a 46-year-old male who sustained a spinal gunshot injury from a 7.62-mm AK-47 round that became lodged within the subarachnoid space at T9-T10. He immediately suffered complete motor and sensory loss. By 24-48 hours post-injury, he had recovered lower extremity motor function fully but continued to have severe sensory loss (posterior cord syndrome). On post-injury day 2, he was evacuated from the combat theater and underwent a T9 laminectomy, extraction of the bullet, and dural laceration repair. At surgery, the traumatic durotomy was widened and the bullet, which was laying on the dorsal surface of the spinal cord, was removed. The dura was closed in a water-tight fashion and fibrin glue was applied. Postoperatively, the patient made a significant but incomplete neurological recovery. His stocking-pattern numbness and sub-umbilical searing dysthesia improved. The spinal canal was clear of the foreign body and he had no persistent CSF leak. Postoperative magnetic resonance imaging of the spine revealed contusion of the spinal cord at the T9 level. Early removal of an intra-canicular bullet in the setting of an incomplete spinal cord injury can lead to significant neurological recovery following even high-velocity and/or high-caliber gunshot wounds. However, this case does not speak to, and prior experience does not demonstrate, significant neurological benefit in the setting of a complete injury.

Combat-Related Intradural Gunshot Wound to the Thoracic Spine: Significant Improvement and Neurologic Recovery Following Bullet Removal

PubMed Central

Louwes, Thijs M; Ward, William H; Lee, Kendall H

2015-01-01

The vast majority of combat-related penetrating spinal injuries from gunshot wounds result in severe or complete neurological deficit. Treatment is based on neurological status, the presence of cerebrospinal fluid (CSF) fistulas, and local effects of any retained fragment(s). We present a case of a 46-year-old male who sustained a spinal gunshot injury from a 7.62-mm AK-47 round that became lodged within the subarachnoid space at T9-T10. He immediately suffered complete motor and sensory loss. By 24-48 hours post-injury, he had recovered lower extremity motor function fully but continued to have severe sensory loss (posterior cord syndrome). On post-injury day 2, he was evacuated from the combat theater and underwent a T9 laminectomy, extraction of the bullet, and dural laceration repair. At surgery, the traumatic durotomy was widened and the bullet, which was laying on the dorsal surface of the spinal cord, was removed. The dura was closed in a water-tight fashion and fibrin glue was applied. Postoperatively, the patient made a significant but incomplete neurological recovery. His stocking-pattern numbness and sub-umbilical searing dysthesia improved. The spinal canal was clear of the foreign body and he had no persistent CSF leak. Postoperative magnetic resonance imaging of the spine revealed contusion of the spinal cord at the T9 level. Early removal of an intra-canicular bullet in the setting of an incomplete spinal cord injury can lead to significant neurological recovery following even high-velocity and/or high-caliber gunshot wounds. However, this case does not speak to, and prior experience does not demonstrate, significant neurological benefit in the setting of a complete injury. PMID:25705346

The benefit of a tough skin: bullet holes, weathering and the preservation of heritage

NASA Astrophysics Data System (ADS)

Mol, Lisa; Gomez-Heras, M.; Brassey, C.; Green, O.; Blenkinsop, T.

2017-02-01

Projectile damage to building stone is a widespread phenomenon. Sites damaged 100 years ago during the First World War still see daily use, while in a more contemporary setting numerous reports show the damage to buildings in Babylon, Mosul and Palmyra. While research has been carried out on the long-term effects of conflict such as fire damage, little is known about the protracted damage sustained through the impact of bullets, shrapnel and other metal projectiles outside of the field of engineering focused on ceramics and metals. To investigate alterations to mineral structure caused by projectile damage, impacts were created in medium-grained, well-compacted, mesoporous sandstone samples using 0.22 calibre lead bullets shot at a distance of 20 m. Half these samples were treated with a surface consolidant (Wacker OH 100), to mimic natural cementation of the rock surface. These samples were then tested for changes to surface hardness and moisture movement during temperature cycles of 15-65°C. Petrographic thin section analysis was carried out to investigate the micro-scale deformation associated with high-speed impact. The results surprisingly show that stress build-up behind pre-existing cementation of the surface, as found in heritage sites that have been exposed to moisture and temperature fluctuations for longer periods of time, can be alleviated with a bullet impact. However, fracture networks and alteration of the mineral matrices still form a weak point within the structure, even at a relatively low impact calibre. This initial study illustrates the need for geomorphologists, geologists, engineers and heritage specialists to work collectively to gain further insights into the long-term impact of higher calibre armed warfare on heritage deterioration.

Deaths resulting from the use of firearms by police against motor vehicles: Study of cases in Porto, Portugal.

PubMed

Rodrigues, Ezequiel; Faria, Paula; Santos, Agostinho; Fraga, Sílvia

2016-04-01

The objective of this study was to investigate the terminal ballistics of police shootings in which the bullets went through any motor vehicle structure before fatally wounding the occupants. 6 cases that occurred in Porto district between 1998 and 2013 were studied. The firearms used were 7.65 mm (n = 1) or 9 mm (n = 3) calibre semi-automatic pistols and 9 mm calibre submachine guns (n = 2); the bullets were full metal jacket type. The metal jacket of the collected projectiles was totally or partially destroyed in 3 cases. It exhibited a deformed structure in all cases. The trajectories of the bullets in the vehicles were always more or less linear, even when initial impact was at an oblique angle. The entry holes in the victims' bodies were larger or much larger in size than the calibre of the bullets. They were located, with the exception of one of the cases, in the left half of the body. The trajectories in the victims' bodies were from front to back, in one case, and from back to front in all others. Exit wounds were only found in two cases. Death occurred immediately after the victim was shot only in one case, despite a vital structure has been hit in all cases. The cases studied support the idea that the use of firearms against vehicles with the sole intention of immobilisation entails uncontrollable danger to the lives of the occupants, and especially when done by police forces not specifically trained for that purpose. Therefore, such use of firearms should be avoided. Copyright © 2016 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

High-speed video analysis of forward and backward spattered blood droplets.

PubMed

Comiskey, P M; Yarin, A L; Attinger, D

2017-07-01

High-speed videos of blood spatter due to a gunshot taken by the Ames Laboratory Midwest Forensics Resource Center (MFRC) [1] are analyzed. The videos used in this analysis were focused on a variety of targets hit by a bullet which caused either forward, backward, or both types of blood spatter. The analysis process utilized particle image velocimetry (PIV) and particle analysis software to measure drop velocities as well as the distributions of the number of droplets and their respective side view area. The results of this analysis revealed that the maximal velocity in the forward spatter can be about 47±5m/s and for the backward spatter - about 24±8m/s. Moreover, our measurements indicate that the number of droplets produced is larger in forward spatter than it is in backward spatter. In the forward and backward spatter the droplet area in the side-view images is approximately the same. The upper angles of the close-to-cone domain in which droplets are issued in forward and backward spatter are, 27±9° and 57±7°, respectively, whereas the lower angles of the close-to-cone domain are 28±12° and 30±18°, respectively. The inclination angle of the bullet as it penetrates the target is seen to play a large role in the directional preference of the spattered blood. Also, muzzle gases, bullet impact angle, as well as the aerodynamic wake of the bullet are seen to greatly influence the flight of the droplets. The intent of this investigation is to provide a quantitative basis for current and future research on bloodstain pattern analysis (BPA) of either forward or backward blood spatter due to a gunshot. Published by Elsevier B.V.

Penetration and perforation of skin by bullets and missiles. A review of the literature.

PubMed

DiMaio, V J

1981-06-01

A review of the literature on perforation of skin by bullets and missiles indicates that there is a range of velocity below which a missile cannot perforate the skin. Velocities of between 38.1 and 61.6 meters/second (125 and 202 ft./second) will produce at least minimal damage to the surface of the skin, though without perforation. In order for a missile to perforate the skin and enter the underlying subcutaneous tissue and muscle, a minimum velocity in the order of 70 meters/second (230 ft./second) is necessary with an energy/area of presentation of approximately 2.1 m-kg/cm2.

An experimental study of the self-healing behavior of ionomeric systems under ballistic impact tests

NASA Astrophysics Data System (ADS)

Grande, A. M.; Coppi, S.; Di Landro, L.; Sala, G.; Giacomuzzo, C.; Francesconi, A.; Rahman, M. A.

2012-04-01

This research deals with the investigation of the self-healing behavior after ballistic damage of ethylene-methacrylic acid ionomers and theirs blends with epoxidized natural rubber (ENR). The self-healing capability was studied by ballistic puncture tests under different experimental conditions as sample thickness, bullet speed, diameter and shape. Bullet speed ranging from few hundreds meters per second to few km/s were employed. The healing efficiency was evaluated by applying a pressure gradient trough the plates and by checking for possible flow at the damage zone. A morphology analysis of the impact area was made observing all samples by scanning electron microscope.

Minimum cause--maximum effect: the travelogue of a bullet.

PubMed

Hartert, Marc; Dahm, Manfred; Neufang, Achim; Vahl, Christian-Friedrich

2010-11-01

This case report involves a 57-year-old male, accidentally shot in the chest with a small bore firearm. The bullet entered the left hemithorax, disrupting the left internal mammarian artery. It then penetrated the anterior wall of the right ventricle causing a pericardial tamponade. After leaving the base of the right heart it perforated the diaphragm, the liver, the spleen and the pancreas. Finally, it penetrated the abdominal aorta 3 cm proximally to the coeliac trunk and reached its final position paravertebrally. This case report illustrates that the management of even minimum gunshot wounds requires a maximum variety of surgical skills.

Survival after heart and coronary-artery penetration by an air-rifle projectile.

PubMed

Doetsch, N; Wolfhard, U; Mathers, M J; Zerkowski, H R

1989-10-01

Gunshot injuries of the heart are extremely rare thoracic traumas in Europe during peacetime. Concomitant lesions of the coronary arteries occur in less than 5%. This case reports on a 26-year-old man who was shot with an air rifle at short range. On admission the patient showed signs of pericardial tamponade. Emergency thoracotomy was performed and a frontal cardiac lesion was found in the distal third of the anterior descending branch of the left coronary artery. The bullet crossed the cavum of the left ventricle and remained in the posterior wall in the subepicardial layer adjacent to the posterior descending coronary branch. Under the conditions of extracorporeal circulation we removed the bullet, repaired both ventricle walls using patches in sandwich technique, and bypassed the coronary lesion by single aortocoronary venous graft. No signs of myocardial infarction could be detected by ECG. The follow-up after 3 years shows no cardiac problems and normal stress tolerance. This case report proves that even air rifle shots, which in general are considered to be harmless, may result in life-threatening injuries. For the severity of the injury are decisive the kinetic energy at the muzzle as well as configuration and type of the bullet.

Observing human movements helps decoding environmental forces.

PubMed

Zago, Myrka; La Scaleia, Barbara; Miller, William L; Lacquaniti, Francesco

2011-11-01

Vision of human actions can affect several features of visual motion processing, as well as the motor responses of the observer. Here, we tested the hypothesis that action observation helps decoding environmental forces during the interception of a decelerating target within a brief time window, a task intrinsically very difficult. We employed a factorial design to evaluate the effects of scene orientation (normal or inverted) and target gravity (normal or inverted). Button-press triggered the motion of a bullet, a piston, or a human arm. We found that the timing errors were smaller for upright scenes irrespective of gravity direction in the Bullet group, while the errors were smaller for the standard condition of normal scene and gravity in the Piston group. In the Arm group, instead, performance was better when the directions of scene and target gravity were concordant, irrespective of whether both were upright or inverted. These results suggest that the default viewer-centered reference frame is used with inanimate scenes, such as those of the Bullet and Piston protocols. Instead, the presence of biological movements in animate scenes (as in the Arm protocol) may help processing target kinematics under the ecological conditions of coherence between scene and target gravity directions.

TESTING OF TMR SAND MANTIS FINAL REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krementz, D; William Daugherty, W

2007-06-12

Screening tests of Sand Mantis candidate materials selected for erosion resistance have been completed. The results of this testing identified that over a relatively short period of operation (<1 hour), measurable erosion will occur in each of the candidate zoom tube materials given equal operating exposure. Additionally, this testing has shown that erosion of the rubber discharge hose directly downstream of the vehicle could be expected to limit the service life of the discharge hose. On the basis of these test results, SRNL recommends the following; {lg_bullet} redesign of critical system components (e.g., zoom tube, discharge hose) should be conductedmore » to improve system characteristics relative to erosion and capitalize on the results of this testing, {lg_bullet} continued efforts to deploy the Sand Mantis should include testing to better define and optimize operating parameters, and gain an understanding of system dynamics, {lg_bullet} discontinue wear testing with the selected materials pending redesign of critical system components (1st recommendation) and inclusion of other candidate materials. The final selection of additional candidate materials should be made following design changes, but might include a Stellite alloy or zirconia.« less

Detection of lead nanoparticles in game meat by single particle ICP-MS following use of lead-containing bullets.

PubMed

Kollander, Barbro; Widemo, Fredrik; Ågren, Erik; Larsen, Erik H; Loeschner, Katrin

2017-03-01

This study investigated whether game meat may contain nanoparticles of lead from ammunition. Lead nanoparticles in the range 40 to 750 nm were detected by ICP-MS in single particle mode in game shot with lead-containing bullets. The median diameter of the detected nanoparticles was around 60 nm. The particle mass concentration ranged from 290 to 340 ng/g meat and the particle number concentrations from 27 to 50 million particles/g meat. The size limit of detection strongly depended on the level of dissolved lead and was in the range of 40 to 80 nm. In game meat sampled more than 10 cm away from the wound channel, no lead particles with a diameter larger than 40 nm were detected. In addition to dissolved lead in meat that originated from particulates, the presence of lead nano particles in game meat represents a hitherto unattended source of lead with a largely unknown toxicological impact to humans. Graphical Abstract Detection of lead nanoparticles in game meat by single particle ICP-MS following use of leadcontaining bullets.

Does preliminary optimisation of an anatomically correct skull-brain model using simple simulants produce clinically realistic ballistic injury fracture patterns?

PubMed

Mahoney, P F; Carr, D J; Delaney, R J; Hunt, N; Harrison, S; Breeze, J; Gibb, I

2017-07-01

Ballistic head injury remains a significant threat to military personnel. Studying such injuries requires a model that can be used with a military helmet. This paper describes further work on a skull-brain model using skulls made from three different polyurethane plastics and a series of skull 'fills' to simulate brain (3, 5, 7 and 10% gelatine by mass and PermaGel™). The models were subjected to ballistic impact from 7.62 × 39 mm mild steel core bullets. The first part of the work compares the different polyurethanes (mean bullet muzzle velocity of 708 m/s), and the second part compares the different fills (mean bullet muzzle velocity of 680 m/s). The impact events were filmed using high speed cameras. The resulting fracture patterns in the skulls were reviewed and scored by five clinicians experienced in assessing penetrating head injury. In over half of the models, one or more assessors felt aspects of the fracture pattern were close to real injury. Limitations of the model include the skull being manufactured in two parts and the lack of a realistic skin layer. Further work is ongoing to address these.

Thermophysiological responses caused by ballistic bullet-proof vests.

PubMed

Lehmacher, E J; Jansing, P; Küpper, T

2007-01-01

Little data is available concerning the heat stress experienced by members of staff who wear bullet-proof vests in a warm or hot environment. For this reason, knowledge is limited and, consequently, preventative advice on how to avoid heat sickness or hyperthermia is required. Skin and body temperatures, fluid loss and the heart rate of 30 persons (15 test persons versus 15 control persons) were measured in three situations typical of the test participants' job situations. Environmental data (wind velocity, air humidity, air temperature) were measured during the tests as well. Whereas there was a significant increase in skin temperatures, there was no difference in the core body temperatures of both groups. Maximum core body temperature remained well below 38 degrees C in all subjects. Test persons wearing vests showed a fluid loss of 1.1 l on average (non-vest wearers in the control group 1.0 l). There is no increased risk of heat stroke or hyperthermia for employees wearing bullet-proof vests in comparison with employees who do not wear them. Both groups, however, should be advised to ensure an adequate intake of fluid to maintain a healthy body fluid balance when working in hot environments.

High school students as a seismic network analysts

NASA Astrophysics Data System (ADS)

Filatov, P.; Fedorenko, Yu.; Beketova, E.; Husebye, E.

2003-04-01

Many research organizations have a large amount of collected seismological data. Some data centers keep data closed from scientists, others have a specific interfaces for access, what is not acceptable for education. For SeisSchool Network in Norway we have developed an universal interface for research and study. The main principles of our interface are: bullet Accessibility - it should provides data access for everybody any where via Internet without restrictions of hardware platform, operational system, Internet browser or bandwidth of connection. bullet Informativity - it should visualize data, have examples of processing routines (filters, envelopes) including phase picking and event location. Also it provides access to various seismology information. bullet Scalability - provide storage for various types of seismic data and a multitude of services for many user levels. This interface (http://pcg1.ifjf.uib.no) helps analysts in basic research and together with information of our Web site we introduces students to theory and practice of seismology. Based on our Web interface group of students won a Norwegian Young Scientists award. In this presentation we demonstrate advantages of our interface, on-line data processing and how to monitoring our network in near real time.

Differentiated stable isotopes signatures between pre- and post-flexion larvae of Atlantic bluefin tuna (Thunnus thynnus) and of its associated tuna species of the Balearic Sea (NW Mediterranean)

NASA Astrophysics Data System (ADS)

García, Alberto; Laiz-Carrión, Raúl; Uriarte, Amaya; Quintanilla, José M.; Morote, Elvira; Rodríguez, José M.; Alemany, Francisco

2017-06-01

The trophic ecology of bluefin tuna larvae (Thunnus thynnus) from the Balearic Sea, together with its co-existing tuna species such as albacore (T. alalunga), bullet (Auxis rochei) and little tunny (Euthynnus alletteratus) were examined by nitrogen and carbon stable isotope analyses. A total of 286 larvae were analyzed for this study, of which 72 larvae corresponded to bluefin, 57 to albacore, 81 to bullet tuna and 76 to little tunny. Tuna larvae were separated into the pre-flexion and post-flexion developmental stages. Within the size 3-9 mm standard length (SL), the stable isotope of nitrogen (δ15N) showed significant differences between species where bluefin tuna larvae ranked highest. Pre-flexion bluefin tuna and little tunny larvae showed significantly higher δ15N signatures than the post-flexion larvae. This effect is attributed to a biochemical trace of maternal δ15N signatures. However, neither albacore nor bullet tuna larvae showed this pattern in δ15N signatures, possibly owing to a compensation effect between lower maternal δ15N values transmitted to pre-flexion larvae and the early increase of δ15N values in post-flexion stages. One way ANOVA showed significant differences between species in the stable isotope ratio of carbon (δ13C) values, which suggests specific differences of carbon sources. Furthermore, a similar significant ontogenic effect between δ13C signatures of pre-flexion and post-flexion larvae is also evidenced in all four species. At pre-flexion stages, all species except bullet tuna larvae showed significant negative relationships between δ15N and larval standard length. At post-flexion stages, a significant linear relationship with larval size was only observed in albacore and bullet tuna larvae indicating a possible trophic shift towards early piscivory. With respect to δ13C values with larval size, all four species showed significant linear decreases. It may be explained by the metabolism of growth of somatic mass subject to modification of the relative carbon isotopic sources. In conclusion, the species' signatures of δ15N and δ13C indicate differentiated early life trophic niches. In addition, it is worth remarking the potential use of transgenerational isotopic transmission in future research applications.

Penetrating gunshots to the head and lack of immediate incapacitation. II. Review of case reports.

PubMed

Karger, B

1995-01-01

Because of the enhanced intracranial tissue disruption (see companion paper) and the functional significance of the central nervous system, penetrating gunshot wounds of the head commonly result in immediate incapacitation. However, in the last century numerous publications reported sustained capability to act following penetrating gunshot wounds of the head. These are reviewed. A large number of case reports had to be excluded from re-examination because of doubtful capability to act or lack of morphological documentation. There remained 53 case reports from 42 sources for systematic analysis. Favourable conditions for sustained capability to act are present in cases where the additional wounding resulting from the special wound ballistic qualities of the head (see companion paper) are minimized. Thus, more than 70% of the guns used fired slow and lightweight bullets: 6.35 mm Browning, .22 rimfire or extremely ineffective projectiles (ancient, inappropriate or selfmade). A centre-fire rifle or a shotgun from close range were never employed in cases involving intracerebral tracts. A coincidence of several lucky circumstances made sustained capability to act possible in two cases of military centrefire rifle bullets passing longitudinally between the frontal lobes without direct contact with brain tissue. Only two large handguns resulting in intracerebral wounding were used: one firing a .38 special bullet, which solely wounded the base of the right temporal lobe and one firing a .45 lead bullet, which seriously injured the left frontal lobe but whose trajectory was limited to the anterior fossa of the skull. Of the trajectories, 28% were outside the neurocranium. At least 70% of the craniocerebral tracts passed above the anterior fossa of the skull, wounding the frontal parts of the brain. Apart from a neurophysiological approach, this preference can be explained by the fact that the base of the anterior cranial fossa and the sella turcica area serve as a bony barrier protecting the parts of the brain located in its "shadow"' relative to the trajectory against cavitational tissue displacement and associated overpressures. This is particularly true of the brain stem. Intracerebral trajectories not located above the anterior fossa were caused by slow and lightweight bullets preferring one temporal lobe. Additionally, one parietal and one occipital lobe were each injured once by a very ineffective projectile and by a 7.65-mm bullet reduced in velocity. Not a single case of injury to the brain stem, the diencephalon, the cerebellum or major paths of motor conduction and only one grazing shot of the anterior parts of the nucleus caudatus (basal ganglia) were described. Morphological signs of high intracranial pressure peaks (cortical contusion zones, indirect skull fractures, perivascular haemorrhages) and secondary missiles were poorly documented. It is suggested that these findings are at least very rare and not obvious in cases of sustained capability to act.

Mystery solved: discovery of extended radio emission in the merging galaxy cluster Abell 2146

NASA Astrophysics Data System (ADS)

Hlavacek-Larrondo, J.; Gendron-Marsolais, M.-L.; Fecteau-Beaucage, D.; van Weeren, R. J.; Russell, H. R.; Edge, A.; Olamaie, M.; Rumsey, C.; King, L.; Fabian, A. C.; McNamara, B.; Hogan, M.; Mezcua, M.; Taylor, G.

2018-04-01

Abell 2146 (z = 0.232) is a massive galaxy cluster currently undergoing a spectacular merger in the plane of the sky with a bullet-like morphology. It was the first system in which both the bow and upstream shock fronts were detected at X-ray wavelengths (Mach ˜2), yet deep Giant MetreWave Telescope 325 MHz observations failed to detect extended radio emission associated with the cluster as is typically seen in such systems. We present new, multiconfiguration 1-2 GHz Karl G. Jansky Very Large Array (VLA) observations of Abell 2146 totalling 16 h of observations. These data reveal for the first time the presence of an extended (≈850 kpc), faint radio structure associated with Abell 2146. The structure appears to harbour multiple components, one associated with the upstream shock that we classify as a radio relic and one associated with the subcluster core that is consisted as being a radio halo bounded by the bow shock. The newly detected structures have some of the lowest radio powers detected thus far in any cluster (P1.4 GHz, halo = 2.4 ± 0.2 × 1023 W Hz-1 and P1.4 GHz, relic = 2.2 ± 0.2 × 1023 W Hz-1). The flux measurement of the halo, as well as its morphology, also suggests that the halo was recently created (≈0.3 Gyr after core passage), consistent with the dynamical state of the cluster. These observations demonstrate the capacity of the upgraded VLA to detect extremely faint and extended radio structures. Based on these observations, we predict that many more radio relics and radio haloes in merging clusters should be detected by future radio facilities such as the Square Kilometre Array.

Compact fs ytterbium fiber laser at 1010 nm for biomedical applications.

PubMed

Kong, Cihang; Pilger, Christian; Hachmeister, Henning; Wei, Xiaoming; Cheung, Tom H; Lai, Cora S W; Huser, Thomas; Tsia, Kevin K; Wong, Kenneth K Y

2017-11-01

Ytterbium-doped fiber lasers (YDFLs) working in the near-infrared (NIR) spectral window and capable of high-power operation are popular in recent years. They have been broadly used in a variety of scientific and industrial research areas, including light bullet generation, optical frequency comb formation, materials fabrication, free-space laser communication, and biomedical diagnostics as well. The growing interest in YDFLs has also been cultivated for the generation of high-power femtosecond (fs) pulses. Unfortunately, the operating wavelengths of fs YDFLs have mostly been confined to two spectral bands, i.e., 970-980 nm through the three-level energy transition and 1030-1100 nm through the quasi three-level energy transition, leading to a spectral gap (990-1020 nm) in between, which is attributed to an intrinsically weak gain in this wavelength range. Here we demonstrate a high-power mode-locked fs YDFL operating at 1010 nm, which is accomplished in a compact and cost-effective package. It exhibits superior performance in terms of both short-term and long-term stability, i.e., <0.3% (peak intensity over 2.4 μs) and <4.0% (average power over 24 hours), respectively. To illustrate the practical applications, it is subsequently employed as a versatile fs laser for high-quality nonlinear imaging of biological samples, including two-photon excited fluorescence microscopy of mouse kidney and brain sections, as well as polarization-sensitive second-harmonic generation microscopy of potato starch granules and mouse tail muscle. It is anticipated that these efforts will largely extend the capability of fs YDFLs which is continuously tunable over 970-1100 nm wavelength range for wideband hyperspectral operations, serving as a promising complement to the gold-standard Ti:sapphire fs lasers.

Compact fs ytterbium fiber laser at 1010 nm for biomedical applications

PubMed Central

Kong, Cihang; Pilger, Christian; Hachmeister, Henning; Wei, Xiaoming; Cheung, Tom H.; Lai, Cora S. W.; Huser, Thomas; Tsia, Kevin. K.; Wong, Kenneth K. Y.

2017-01-01

Ytterbium-doped fiber lasers (YDFLs) working in the near-infrared (NIR) spectral window and capable of high-power operation are popular in recent years. They have been broadly used in a variety of scientific and industrial research areas, including light bullet generation, optical frequency comb formation, materials fabrication, free-space laser communication, and biomedical diagnostics as well. The growing interest in YDFLs has also been cultivated for the generation of high-power femtosecond (fs) pulses. Unfortunately, the operating wavelengths of fs YDFLs have mostly been confined to two spectral bands, i.e., 970-980 nm through the three-level energy transition and 1030-1100 nm through the quasi three-level energy transition, leading to a spectral gap (990-1020 nm) in between, which is attributed to an intrinsically weak gain in this wavelength range. Here we demonstrate a high-power mode-locked fs YDFL operating at 1010 nm, which is accomplished in a compact and cost-effective package. It exhibits superior performance in terms of both short-term and long-term stability, i.e., <0.3% (peak intensity over 2.4 μs) and <4.0% (average power over 24 hours), respectively. To illustrate the practical applications, it is subsequently employed as a versatile fs laser for high-quality nonlinear imaging of biological samples, including two-photon excited fluorescence microscopy of mouse kidney and brain sections, as well as polarization-sensitive second-harmonic generation microscopy of potato starch granules and mouse tail muscle. It is anticipated that these efforts will largely extend the capability of fs YDFLs which is continuously tunable over 970-1100 nm wavelength range for wideband hyperspectral operations, serving as a promising complement to the gold-standard Ti:sapphire fs lasers. PMID:29188091

Preparing and Presenting Effective Research Posters

PubMed Central

Miller, Jane E

2007-01-01

Objectives Posters are a common way to present results of a statistical analysis, program evaluation, or other project at professional conferences. Often, researchers fail to recognize the unique nature of the format, which is a hybrid of a published paper and an oral presentation. This methods note demonstrates how to design research posters to convey study objectives, methods, findings, and implications effectively to varied professional audiences. Methods A review of existing literature on research communication and poster design is used to identify and demonstrate important considerations for poster content and layout. Guidelines on how to write about statistical methods, results, and statistical significance are illustrated with samples of ineffective writing annotated to point out weaknesses, accompanied by concrete examples and explanations of improved presentation. A comparison of the content and format of papers, speeches, and posters is also provided. Findings Each component of a research poster about a quantitative analysis should be adapted to the audience and format, with complex statistical results translated into simplified charts, tables, and bulleted text to convey findings as part of a clear, focused story line. Conclusions Effective research posters should be designed around two or three key findings with accompanying handouts and narrative description to supply additional technical detail and encourage dialog with poster viewers. PMID:17355594

Bullet identification: a case of a fatal hunting accident resolved by comparison of lead shot using instrumental neutron activation analysis.

PubMed

Capannesi, G; Sedda, A F

1992-03-01

Bullet identification by chemical analysis often provides a powerful clue in forensic science. A case is reported in which a hunting accident was resolved by using instrumental neutron activation analysis (INAA) for direct comparison of the trace element content in lead shot. Different preparation batches of lead shot appear to have a high within-group composition homogeneity, and good differentiation is achieved between different batches. Determination of the nickel and antimony content on a bush branch demonstrated that the branch had been perforated by one of the shot pellets, and this helped the detectives in reconstruction of the crime scene.

Light bullets in coupled nonlinear Schrödinger equations with variable coefficients and a trapping potential.

PubMed

Xu, Si-Liu; Zhao, Guo-Peng; Belić, Milivoj R; He, Jun-Rong; Xue, Li

2017-04-17

We analyze three-dimensional (3D) vector solitary waves in a system of coupled nonlinear Schrödinger equations with spatially modulated diffraction and nonlinearity, under action of a composite self-consistent trapping potential. Exact vector solitary waves, or light bullets (LBs), are found using the self-similarity method. The stability of vortex 3D LB pairs is examined by direct numerical simulations; the results show that only low-order vortex soliton pairs with the mode parameter values n ≤ 1, l ≤ 1 and m = 0 can be supported by the spatially modulated interaction in the composite trap. Higher-order LBs are found unstable over prolonged distances.

[Comments on the paper by D. Tausch et al. Experiments on the penetration power of various bullets into skin and muscle tissue (author's transl)].

PubMed

Dammermann, W

1979-07-17

The objections in the following comments on a recent paper by Tausch et al. (1978) are raised principally to the points that the mass of the projectile is given an importance for the penetration which is not justified, and that the inherent uncertainty of the measurement data and the scope of validity of the empirical formulas are not sufficiently taken into account. The discussion on the process of penetration and a discontinuity of the depth of penetration as a function of the velocity of the bullet is of fundamental significance, with consequences for the definition of the critical velocity.

Temperature characteristics of the radiation detector using TlBr crystals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shoji, T.; Hitomi, K.; Muroi, O.

1999-12-01

The radiation detector was fabricated from the TlBr crystals grown by TMZ (traveling molten zone) method and the FWHM and transit time of electrons and holes were measured as a function of temperature. The TlBr radiation detector shows the best response characteristics at about 313 K (3.19K{sup {sm{underscore}bullet}1}) in cases where holes mainly contributed to the output pulses. However, in the temperatures higher than 300 K (2.22 K{sup {sm{underscore}bullet}1}), the FWHM for {sup 241}Am {alpha}-particles (5.498 MeV) becomes worse. An activation energy of about 0.90eV has been deduced from the resistivity measurement.

Kinetics of the reduction of cobalt(III) amine complexes by 1-hydroxy-1-methylethyl radicals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kusaba, K.; Ogino, Hiroshi; Bakac, A.

1989-03-08

In order to better understand the rate constants for the reduction of several cobalt complexes by 1-hydroxy-1-methylene radicals ({sup {sm bullet}}C(CH{sub 3}){sub 2}OH), the reactions of {sup {sm bullet}}(CH{sub 3}){sub 2}OH with several cobalt(III) complexes of bidentate amines have been studied. The Marcus-Hush theory was deemed the most appropriate for analysis of the kinetic data. The correlation between the kinetics of the reduction of the Co(III) amines by C(CH{sub 3}){sub 2}OH and the reduction of the first d-d band for Co(III) complexes is discussed. 21 refs., 2 figs., 1 tab.

[Wound Ballistics – a Brief Overview].

PubMed

Bolliger, Stephan A; Eggert, Sebastian; Thali, Michael J

2016-02-03

Wound ballistics examines the specific effect, namely the wound profile, of bullets on the body by firing at synthetic models made of ordnance gelatine, glycerin soap and synthetic bones, validated with real cases from (battlefield) surgery and forensic pathology. Wound profile refers to the penetration depth, the bullet deformation/ fragmentation, the diameter of the permanent and the temporary wound cavity. Knowing these features and the used ammunition a surgeon can rapidly assess the amount damage within a patient. The forensic pathologist can draw conclusions as to the used ammunition based on the wound profile. By measuring of the destructive capability of different ammunition types, wound ballistics lays the foundation for guidelines concerning the maximum effect of military ammunition.

Civilian gunshot wounds to the head with brain stem localization. A case report.

PubMed

Verlicchi, A; Facchin, P; Zanotti, B

1998-12-01

The authors present a case of a patient wounded to the head and back by civilian firearm projectiles. The case peculiarity is that only one bullet reached the brain stem level causing significant neurological deficits. The final clinical picture is comparable to the "caudal pontine tegmentum syndrome". The authors describe both the bullet path and the intracranial localization taking into account ballistic details. The problems associated with prognosis, diagnosis, and treatment for gunshot wounds are discussed. In addition, the authors explain the main intracranial lesions and their mechanisms, the role of investigation, and the protocol of medical and surgical treatment. Lastly, a systematic approach for treating these types of gunshot wounds is outlined.

International Linear Collider Reference Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brau, James,; Okada, Yasuhiro,; Walker, Nicholas J.,

2007-08-13

{lg_bullet} What is the universe? How did it begin? {lg_bullet} What are matter and energy? What are space and time? These basic questions have been the subject of scientific theories and experiments throughout human history. The answers have revolutionized the enlightened view of the world, transforming society and advancing civilization. Universal laws and principles govern everyday phenomena, some of them manifesting themselves only at scales of time and distance far beyond everyday experience. Particle physics experiments using particle accelerators transform matter and energy, to reveal the basic workings of the universe. Other experiments exploit naturally occurring particles, such as solarmore » neutrinos or cosmic rays, and astrophysical observations, to provide additional insights.« less

[Management of suicidal orbital gunshot wounds to the temple].

PubMed

Schargus, M; Kawa, D; Elling, M; Kunkel, M

2014-10-01

Orbital gunshot wounds are rarely found after suicide. A gunshot fired at point blank range into the temple has devastating effects on all intraorbital and neighboring structures. This article reports on two cases of gunshot wounds to the lateral orbit in attempted suicides with different weapons from 2012 and 2013 and treated at the Ruhr University Eye Hospital in Bochum. In both cases treatment was carried out in cooperation with the department of oral and maxillofacial surgery, Ruhr University Hospital, Bochum. In the first case a 7.65 mm gun was used. The patient presented with a double penetration of both orbits with total destruction of both globes and a reconstruction was not possible. The second patient presented with multiple shots to the head from a small caliber gun (5.6 mm) where one bullet entered the right orbit behind the globe. The bullet could be localized using computed tomography (CT) and surgically removed with preservation of the globe and with a postoperative visual acuity of 20/60. The preservation of visual function after orbital gunshot wounds depends on both the projectile channel and the characteristics of the gun and bullet. Close collaboration in surgical management between ophthalmologists, maxillofacial surgeons and neurosurgeons in specialized centers is necessary because patients often present with multiple trauma and prompt interdisciplinary treatment is needed.

Phosphodiesterase inhibitors for persistent pulmonary hypertension of the newborn: a review.

PubMed

Travadi, J N; Patole, S K

2003-12-01

Persistent pulmonary hypertension of the newborn (PPHN) is a complex syndrome with multiple causes, with an incidence of 0.43-6.8/1,000 live births and a mortality of 10-20%. Survivors have high morbidity in the forms of neurodevelopmental and audiological impairment, cognitive delays, hearing loss, and a high rate of rehospitalization. The optimal approach to the management of PPHN remains controversial. Inhaled nitric oxide (iNO) is currently regarded as the gold standard therapy, but with as many as 30% of cases failing to respond, has not proven to be the single magic bullet. Given the complex pathophysiology of the disease, any such magic bullet is unlikely. A number of recent studies have suggested a role for specific phosphodiesterase (PDE) inhibitors in the management of PPHN. Sildenafil, a specific PDE5 inhibitor, appears the most promising of such agents. We aim to review the current status and limitations of iNO and the potential of PDE inhibitors in the management of PPHN. The reasons why caution is warranted before specific PDE5 inhibitors like sildenafil are labelled as potential magic bullets for PPHN will be discussed. The need for randomized-controlled trials to determine the safety, efficacy, and long-term outcome following treatment with sildenafil in PPHN is emphasized. Copyright 2003 Wiley-Liss, Inc.

Shooter position estimation with muzzle blast and shockwave measurements from separate locations

NASA Astrophysics Data System (ADS)

Grasing, David

2016-05-01

There are two acoustical events associated with small arms fire: the muzzle blast (created by bullets being expelled from the barrel of the weapon), and the shockwave (created by bullets which exceed the speed of sound). Assuming the ballistics of a round are known, the times and directions of arrival of the acoustic events furnish sufficient information to determine the origin of the shot. Existing methods tacitly assume that it is a single sensor which makes measurements of the times and direction of arrival. If the sensor is located past the point where the bullet goes transonic or if the sensor is far off the axis of the shot line a single sensor localization become highly inaccurate due to the ill-conditioning of the localization problem. In this paper, a more general approach is taken which allows for localizations from measurements made at separate locations. There are considerable advantages to this approach, the most noteworthy of which is the improvement in localization accuracy due to the improvement in the conditioning of the problem. Additional benefits include: the potential to locate in cases where a single sensor has insufficient information, furnishing high quality initialization to data fusion algorithms, and the potential to identify the round from a set of possible rounds.

Soft soap as a tissue simulant medium for wound ballistic studies investigated by comparative firings with assault rifles Ak 4 and M16A1 into live, anesthetized animals.

PubMed

Janzon, B

1982-01-01

For the purpose of comparing the properties of a particular soft soap with those of live muscle tissue, a comparative study was carried out, involving firings into live, anesthetized pigs and into blocks of soft soap. The weapon - ammunition combinations utilized were Ak 4 - sk ptr 10 prj - the Swedish version of 7.62 mm NATO assault rifle M16A1- M. 193 - the U.S. standard weapon, calibre 5.56 mm. The registrations were done by flash X-ray units of 105 and 150 kilovolts, mounted in an orthogonal stereo set-up with 8-11 units, making it possible to obtain 4 to 6 measurements of bullet position, yaw angle etc. during the penetration of the target in one shot. By evaluation of these firings, and by "pooling" of the data for each series it was possible to calculate retardation force on the bullet as a function of penetration depth for the soap targets, and for the live targets. The results show that no significant difference can be discerned between the soft soap and animal tissue as regards their influence on the behaviour of the bullet.

Cell adhesion during bullet motion in capillaries.

PubMed

Takeishi, Naoki; Imai, Yohsuke; Ishida, Shunichi; Omori, Toshihiro; Kamm, Roger D; Ishikawa, Takuji

2016-08-01

A numerical analysis is presented of cell adhesion in capillaries whose diameter is comparable to or smaller than that of the cell. In contrast to a large number of previous efforts on leukocyte and tumor cell rolling, much is still unknown about cell motion in capillaries. The solid and fluid mechanics of a cell in flow was coupled with a slip bond model of ligand-receptor interactions. When the size of a capillary was reduced, the cell always transitioned to "bullet-like" motion, with a consequent decrease in the velocity of the cell. A state diagram was obtained for various values of capillary diameter and receptor density. We found that bullet motion enables firm adhesion of a cell to the capillary wall even for a weak ligand-receptor binding. We also quantified effects of various parameters, including the dissociation rate constant, the spring constant, and the reactive compliance on the characteristics of cell motion. Our results suggest that even under the interaction between P-selectin glycoprotein ligand-1 (PSGL-1) and P-selectin, which is mainly responsible for leukocyte rolling, a cell is able to show firm adhesion in a small capillary. These findings may help in understanding such phenomena as leukocyte plugging and cancer metastasis. Copyright © 2016 the American Physiological Society.

A Strong Merger Shock in Abell 665

NASA Technical Reports Server (NTRS)

Dasadia, S.; Sun, M.; Sarazin, C.; Morandi, A.; Markevitch, M.; Wik, D.; Feretti, L.; Giovannini, G.; Govoni, F.

2016-01-01

Deep (103 ks) Chandra observations of Abell 665 have revealed rich structures in this merging galaxy cluster, including a strong shock and two cold fronts. The newly discovered shock has a Mach number of M =?3.0 +/- 0.6, propagating in front of a cold disrupted cloud. This makes Abell 665 the second cluster, after the Bullet cluster, where a strong merger shock of M is approximately 3 has been detected. The shock velocity from jump conditions is consistent with (2.7 +/- 0.7) × 10(exp 3) km s(exp -1). The new data also reveal a prominent southern cold front with potentially heated gas ahead of it. Abell 665 also hosts a giant radio halo. There is a hint of diffuse radio emission extending to the shock at the north, which needs to be examined with better radio data. This new strong shock provides a great opportunity to study the reacceleration model with the X-ray and radio data combined.

Emerging Technologies and MOUT

DOE Office of Scientific and Technical Information (OSTI.GOV)

YONAS,GEROLD; MOY,TIMOTHY DAVID

Operating in a potentially hostile city is every soldier's nightmare. The staggering complexity of the urban environment means that deadly threats--or non-combatants-may lurk behind every corner, doorway, or window. Urban operations present an almost unparalleled challenge to the modern professional military. The complexity of urban operations is further amplified by the diversity of missions that the military will be called upon to conduct in urban terrain. Peace-making and peace-keeping missions, urban raids to seize airports or WMD sites or to rescue hostages, and extended urban combat operations all present different sorts of challenges for planners and troops on the ground.more » Technology almost never serves as a magic bullet, and past predictions of technological miracles pile high on the ash heap of history. At the same time, it is a vital element of planning in the modern age to consider and, if possible, take advantage of emerging technologies. We believe that technologies can assist military operations in urbanized terrain (MOUT) in three primary areas, which are discussed.« less

Primary photochemical processes in fac-ClRe(CO){sub 3}L{sub 2} (L = 4-phenylpyridine and 4-cyanopyridine): A steady-state and flash photochemical study of reaction products and intermediates

DOE Office of Scientific and Technical Information (OSTI.GOV)

Feliz, M.; Ferraudi, G.; Altmiller, H.

1992-01-09

The photochemistry of fac-ClRe(CO){sub 3}L{sub 2}, L = 4-phenylpyridine and 4-cyanopyridine, has been investigated by monochromatic steady-state and flash photolyses between 400 and 229 nm. Two parallel photoprocesses, the photogeneration of the emissive MLCT state and the photoredox dissociation in (ClRe(CO){sub 3}L{sup +}, L{sup {sm_bullet}{minus}}) products, have been observed with both compounds. A third photoprocess, namely, the photogeneration of a Re(I)-ligand biradical, has been observed only in photolyses of the 4-phenylpyridine complex. While this Re(I)-ligand biradical reduces Cu{sup II}(TIM){sup 2+} to the corresponding Cu(I) species, no such reaction is undergone by the MLCT state. Differences between the electronic structures ofmore » these complexes, shown by extended Hueckel MO calculations, were related to their intrinsic photochemical behavior. 54 refs., 9 figs., 1 tab.« less

Effect of type and transfer of conventional weapons on civilian injuries: retrospective analysis of prospective data from Red Cross hospitals

PubMed Central

Coupland, Robin M; Samnegaard, Hans O

1999-01-01

Objective To examine the link between different weapons used in modern wars and their potential to injury civilians. Design Retrospective analysis of prospectively collected data about hospital admissions. Setting Hospitals of the International Committee of the Red Cross. Subjects 18 877 people wounded by bullets, fragmentation munitions, or mines. Of these, 2012 had been admitted to the hospital in Kabul within six hours of injury. Main outcome measures Age and sex of wounded people according to cause of injury and whether they were civilians (women and girls, boys under 16 years old, or men of 50 or more). Results 18.7% of those injured by bullets, 34.1% of those injured by fragments, and 30.8% of those injured by mines were civilians. Of those admitted to the Red Cross hospital in Kabul within six hours of injury, 39.1% of those injured by bullets, 60.6% of those injured by fragments, and 55.0% of those injured by mines were civilians. Conclusions The proportion of civilians injured differs between weapon systems. The higher proportion injured by fragments and mines is explicable in terms of the military efficiency of weapons, the distance between user and victim, and the effect that the kind of weapon has on the psychology of the user. Key messagesDuring war, mines and fragmenting munitions (mortars, bombs, and shells) are more likely than bullets to injure civiliansCivilians in a city under siege are particularly at risk of being injured by weapons whose users are not able to see the victimThe inherent nature of weapons may be a factor in determining whether civilians are killed or injuredThere is a need for greater respect for the Fourth Geneva Convention and for greater controls on weapons being transferred to untrained and undisciplined forces PMID:10445921

The identification of lead ammunition as a source of lead exposure in First Nations: the use of lead isotope ratios.

PubMed

Tsuji, Leonard J S; Wainman, Bruce C; Martin, Ian D; Sutherland, Celine; Weber, Jean-Philippe; Dumas, Pierre; Nieboer, Evert

2008-04-15

The use of lead shotshell to hunt water birds has been associated with lead-contamination in game meat. However, evidence illustrating that lead shotshell is a source of lead exposure in subsistence hunting groups cannot be deemed definitive. This study seeks to determine whether lead shotshell constitutes a source of lead exposure using lead isotope ratios. We examined stable lead isotope ratios for lichens, lead shotshell and bullets, and blood from residents of Fort Albany and Kashechewan First Nations, and the City of Hamilton, Ontario, Canada. Data were analyzed using ANOVA and regression analyses. ANOVA of isotope ratios for blood revealed significant differences with respect to location, but not sex. Hamilton differed from both Kashechewan and Fort Albany; however, the First Nations did not differ from each other. ANOVA of the isotope ratios for lead ammunition and lichens revealed no significant differences between lichen groups (north and south) and for the lead ammunition sources (pellets and bullets). A plot of (206)Pb/(204)Pb and (206)Pb/(207)Pb values illustrated that lichens and lead ammunition were distinct groupings and only the 95% confidence ellipse of the First Nations group overlapped that of lead ammunition. In addition, partial correlations between blood-lead levels (adjusted for age) and isotope ratios revealed significant (p<0.05) positive correlations for (206)Pb/(204)Pb and (206)Pb/(207)Pb, and a significant negative correlation for (208)Pb/(206)Pb, as predicted if leaded ammunition were the source of lead exposure. In conclusion, lead ammunition was identified as a source of lead exposure for First Nations people; however, the isotope ratios for lead shotshell pellets and bullets were indistinguishable. Thus, lead-contaminated meat from game harvested with lead bullets may also be contributing to the lead body burden.

Image guided surgery in the management of craniocerebral gunshot injuries

PubMed Central

Elserry, Tarek; Anwer, Hesham; Esene, Ignatius Ngene

2013-01-01

Background: A craniocerebral trauma caused by firearms is a complex injury with high morbidity and mortality. One of the most intriguing and controversial part in their management in salvageable patients is the decision to remove the bullet/pellet. A bullet is foreign to the brain and, in principle, should be removed. Surgical options for bullet extraction span from conventional craniotomy, through C-arm-guided surgery to minimally invasive frame or frameless stereotaxy. But what is the best surgical option? Methods: We prospectively followed up a cohort of 28 patients with cranio-cerebral gunshot injury (CCHSI) managed from January to December 2012 in our department of neurosurgery. The missiles were extracted via stereotaxy (frame or frameless), C-arm-guided, or free-hand-based surgery. Cases managed conservatively were excluded. The Glasgow Outcome Score was used to assess the functional outcome on discharge. Results: Five of the eight “stereotactic cases” had an excellent outcome after missile extraction while the initially planned stereotaxy missed locating the missile in three cases and were thus subjected to free hand craniotomy. Excellent outcome was obtained in five of the nine “neuronavigation cases, five of the eight cases for free hand surgery based on the bony landmarks, and five of the six C-arm-based surgery. Conclusion: Conventional craniotomy isn’t indicated in the extraction of isolated, retained, intracranial firearm missiles in civilian injury but could be useful when the missile is incorporated within a surgical lesion. Stereotactic surgery could be useful for bullet extraction, though with limited precision in identifying small pellets because of their small sizes, thus exposing patients to same risk of brain insult when retrieving a missile by conventional surgery. Because of its availability, C-arm-guided surgery continues to be of much benefit, especially in emergency situations. We recommend an extensive long-term study of these treatment modalities for CCGSI. PMID:24349869

Potential Hazard to Human Health from Exposure to Fragments of Lead Bullets and Shot in the Tissues of Game Animals

PubMed Central

Pain, Deborah J.; Cromie, Ruth L.; Newth, Julia; Brown, Martin J.; Crutcher, Eric; Hardman, Pippa; Hurst, Louise; Mateo, Rafael; Meharg, Andrew A.; Moran, Annette C.; Raab, Andrea; Taggart, Mark A.; Green, Rhys E.

2010-01-01

Background Lead is highly toxic to animals. Humans eating game killed using lead ammunition generally avoid swallowing shot or bullets and dietary lead exposure from this source has been considered low. Recent evidence illustrates that lead bullets fragment on impact, leaving small lead particles widely distributed in game tissues. Our paper asks whether lead gunshot pellets also fragment upon impact, and whether lead derived from spent gunshot and bullets in the tissues of game animals could pose a threat to human health. Methodology/Principal Findings Wild-shot gamebirds (6 species) obtained in the UK were X-rayed to determine the number of shot and shot fragments present, and cooked using typical methods. Shot were then removed to simulate realistic practice before consumption, and lead concentrations determined. Data from the Veterinary Medicines Directorate Statutory Surveillance Programme documenting lead levels in raw tissues of wild gamebirds and deer, without shot being removed, are also presented. Gamebirds containing ≥5 shot had high tissue lead concentrations, but some with fewer or no shot also had high lead concentrations, confirming X-ray results indicating that small lead fragments remain in the flesh of birds even when the shot exits the body. A high proportion of samples from both surveys had lead concentrations exceeding the European Union Maximum Level of 100 ppb w.w. (0.1 mg kg−1 w.w.) for meat from bovine animals, sheep, pigs and poultry (no level is set for game meat), some by several orders of magnitude. High, but feasible, levels of consumption of some species could result in the current FAO/WHO Provisional Weekly Tolerable Intake of lead being exceeded. Conclusions/Significance The potential health hazard from lead ingested in the meat of game animals may be larger than previous risk assessments indicated, especially for vulnerable groups, such as children, and those consuming large amounts of game. PMID:20436670

Potential hazard to human health from exposure to fragments of lead bullets and shot in the tissues of game animals.

PubMed

Pain, Deborah J; Cromie, Ruth L; Newth, Julia; Brown, Martin J; Crutcher, Eric; Hardman, Pippa; Hurst, Louise; Mateo, Rafael; Meharg, Andrew A; Moran, Annette C; Raab, Andrea; Taggart, Mark A; Green, Rhys E

2010-04-26

Lead is highly toxic to animals. Humans eating game killed using lead ammunition generally avoid swallowing shot or bullets and dietary lead exposure from this source has been considered low. Recent evidence illustrates that lead bullets fragment on impact, leaving small lead particles widely distributed in game tissues. Our paper asks whether lead gunshot pellets also fragment upon impact, and whether lead derived from spent gunshot and bullets in the tissues of game animals could pose a threat to human health. Wild-shot gamebirds (6 species) obtained in the UK were X-rayed to determine the number of shot and shot fragments present, and cooked using typical methods. Shot were then removed to simulate realistic practice before consumption, and lead concentrations determined. Data from the Veterinary Medicines Directorate Statutory Surveillance Programme documenting lead levels in raw tissues of wild gamebirds and deer, without shot being removed, are also presented. Gamebirds containing > or =5 shot had high tissue lead concentrations, but some with fewer or no shot also had high lead concentrations, confirming X-ray results indicating that small lead fragments remain in the flesh of birds even when the shot exits the body. A high proportion of samples from both surveys had lead concentrations exceeding the European Union Maximum Level of 100 ppb w.w. (0.1 mg kg(-1) w.w.) for meat from bovine animals, sheep, pigs and poultry (no level is set for game meat), some by several orders of magnitude. High, but feasible, levels of consumption of some species could result in the current FAO/WHO Provisional Weekly Tolerable Intake of lead being exceeded. The potential health hazard from lead ingested in the meat of game animals may be larger than previous risk assessments indicated, especially for vulnerable groups, such as children, and those consuming large amounts of game.

Evaluation of spinal missile injuries with respect to bullet trajectory, surgical indications and timing of surgical intervention: a new guideline.

PubMed

Duz, Bulent; Cansever, Tufan; Secer, Halil Ibrahim; Kahraman, Serdar; Daneyemez, Mehmet Kadri; Gonul, Engin

2008-09-15

Analysis of the patients with spinal missile injury (SMI). Choosing the optimum treatment for SMI with respect to bullet trajectory, evaluation of surgical indications, and timing of surgical intervention. A few guidelines were reported for the management of SMI. But there is still no consensus about the indication and timing of the surgery. The relationship between the surgery and bullet trajectory was not reported previously. One hundred twenty-nine patients with spinal missile injury were admitted to our department from 1994 to 2006 and 122 of them could be functionally monitored. Functional recovery and complications in surgical and conservative treatment groups were evaluated. Surgical indications were discussed. The injuries were classified with respect to the bullet's trajectory. Seventy-four patients were treated surgically, of whom 60 (81%) had incomplete injuries. All 17 patients whose vertebral column was injured with side-to-side trajectory were operated on because of instability. In the surgical group, 33 (56.9%) showed improvement, 20 (34.5%) showed no change, and 5 (8.6%) worsened. The best results were obtained by the patients who received operations because of rapid neurologic decline, compression, and instability in the spinal canal (P < 0.0001). Twenty-three (31%) complications and associated injuries were seen in the surgically treated patients and 18 (34.6%) were seen in the conservatively treated patients. Anteroposterior and oblique trajectories [Gulhane Military Medical Academy (GATA)-SMI I and GATA-SMI II] of SMI must be recognized as highly infective in the lumbar region. A side-to-side trajectory (GATA-SMI III) missile causing spinal cord injury is unstable and needs further stabilization. The spinal cord is not injured by the GATA-SMI IV trajectory, and thus, the best approach in this case is conservative. The best results from neurosurgical interventions may be achieved after rapid neurologic deteriorations because of spinal compression and/or instability.

Forensic value of gunpowder tattooing in identification of multiple entrance wounds from one bullet.

PubMed

Tokdemir, Mehmet; Kafadar, Huseyin; Turkoglu, Abdurrahim; Bork, Turgay

2007-05-01

Multiple entrance gunshot wounds can give useful information in forensic evaluation of deaths from homicide and suicide. Although the presence of multiple entrance gunshot wounds does not absolutely exclude the possibility of suicide, they are important to the forensic investigators and pathologists in cases of assault, attempted homicide and suicide as they provide important clues for determination of number of shots fired and direction of firing. We present a case of 16 years of young woman who was shot to death by her husband. External examination revealed an entrance wound with semi-lunar shot residue at the dorsal side of her left hand at 5th metacarpus, and exit wound on the hypothenar muscle. There was also a second wound entrance located on her left zygoma. Direction of the bullet was downward traveling from left-to-right. Initially it was thought that there were two close shots, but when her left hand was placed over the malar area her face, it was determined that the gunshot powder tattoos were completing the nature of a single shot from a close distance. Crime scene investigation revealed only one cartridge casing. The autopsy and radiography findings showed that the bullet was entered from dorsal site of the left hand exiting from the palm and re-entering from the zygomatic region, hit the base of the skull, and remained in the soft tissue of the right mandible after passing the soft palate. The bullet was caused an incomplete laceration of the right internal arteria carotid and she died of internal and external bleeding. Detailed investigation of gunshot residues can provide important information for clarification of close distance gunshot wounding. We present this case due to its interesting nature, and to highlight the importance of detailed investigation of the gun powder residues in cases with multiple entry wounds.

Potential application of microsensor technology in radioactive waste management with emphasis on headspace gas detection.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Chad Edward; Thomas, Michael Loren; Wright, Jerome L.

2004-09-01

Waste characterization is probably the most costly part of radioactive waste management. An important part of this characterization is the measurements of headspace gas in waste containers in order to demonstrate the compliance with Resource Conservation and Recovery Act (RCRA) or transportation requirements. The traditional chemical analysis methods, which include all steps of gas sampling, sample shipment and laboratory analysis, are expensive and time-consuming as well as increasing worker's exposure to hazardous environments. Therefore, an alternative technique that can provide quick, in-situ, and real-time detections of headspace gas compositions is highly desirable. This report summarizes the results obtained from amore » Laboratory Directed Research & Development (LDRD) project entitled 'Potential Application of Microsensor Technology in Radioactive Waste Management with Emphasis on Headspace Gas Detection'. The objective of this project is to bridge the technical gap between the current status of microsensor development and the intended applications of these sensors in nuclear waste management. The major results are summarized below: {sm_bullet} A literature review was conducted on the regulatory requirements for headspace gas sampling/analysis in waste characterization and monitoring. The most relevant gaseous species and the related physiochemical environments were identified. It was found that preconcentrators might be needed in order for chemiresistor sensors to meet desired detection {sm_bullet} A long-term stability test was conducted for a polymer-based chemresistor sensor array. Significant drifts were observed over the time duration of one month. Such drifts should be taken into account for long-term in-situ monitoring. {sm_bullet} Several techniques were explored to improve the performance of sensor polymers. It has been demonstrated that freeze deposition of black carbon (CB)-polymer composite can effectively eliminate the so-called 'coffee ring' effect and lead to a desirable uniform distribution of CB particles in sensing polymer films. The optimal ratio of CB/polymer has been determined. UV irradiation has been shown to improve sensor sensitivity. {sm_bullet} From a large set of commercially available polymers, five polymers were selected to form a sensor array that was able to provide optimal responses to six target-volatile organic compounds (VOCs). A series of tests on the response of sensor array to various VOC concentrations have been performed. Linear sensor responses have been observed over the tested concentration ranges, although the responses over a whole concentration range are generally nonlinear. {sm_bullet} Inverse models have been developed for identifying individual VOCs based on sensor array responses. A linear solvation energy model is particularly promising for identifying an unknown VOC in a single-component system. It has been demonstrated that a sensor array as such we developed is able to discriminate waste containers for their total VOC concentrations and therefore can be used as screening tool for reducing the existing headspace gas sampling rate. {sm_bullet} Various VOC preconcentrators have been fabricated using Carboxen 1000 as an absorbent. Extensive tests have been conducted in order to obtain optimal configurations and parameter ranges for preconcentrator performance. It has been shown that use of preconcentrators can reduce the detection limits of chemiresistors by two orders of magnitude. The life span of preconcentrators under various physiochemical conditions has also been evaluated. {sm_bullet} The performance of Pd film-based H2 sensors in the presence of VOCs has been evaluated. The interference of sensor readings by VOC has been observed, which can be attributed to the interference of VOC with the H2-O2 reaction on the Pd alloy surface. This interference can be eliminated by coating a layer of silicon dioxide on sensing film surface. Our work has demonstrated a wide range of applications of gas microsensors in radioactive waste management. Such applications can potentially lead to a significant cost saving and risk reduction for waste characterization.« less

Dark matter line emission constraints from NuSTAR observations of the bullet cluster

DOE PAGES

Riemer-Sørensen, S.; Wik, D.; Madejski, G.; ...

2015-08-27

Some dark matter candidates, e.g., sterile neutrinos, provide observable signatures in the form of mono-energetic line emission. Here, we present the first search for dark matter line emission in themore » $$3-80\\;\\mathrm{keV}$$ range in a pointed observation of the Bullet Cluster with NuSTAR. We do not detect any significant line emission and instead we derive upper limits (95% CL) on the flux, and interpret these constraints in the context of sterile neutrinos and more generic dark matter candidates. NuSTAR does not have the sensitivity to constrain the recently claimed line detection at $$3.5\\;\\mathrm{keV}$$, but improves on the constraints for energies of $$10-25\\;\\mathrm{keV}$$.« less

Wound ballistics: theory and practice.

PubMed

Ordog, G J; Wasserberger, J; Balasubramanium, S

1984-12-01

Ballistics is the study of the natural laws governing projectile missiles and their predictable performances, and wound ballistics is the study of a missile's effect on living tissue. A knowledge of these topics is essential to determine the extent and type of injury from a missile. The type of missile can often be determined by radiography. The caliber can be measured directly if the bullet is close to the x-ray plate and the x-ray tube is at least six feet from the film. Changing these distances can result in a maximum magnification of the bullet image of 20%, and the exact amount can be calculated using a formula provided. Definitions of ballistic and wound ballistic terms are provided, as are examples of wound ballistics in application.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ren, Aiming; Rajashankar, Kanagalaghatta R.; Patel, Dinshaw J.

Significant advances in our understanding of RNA architecture, folding and recognition have emerged from structure-function studies on riboswitches, non-coding RNAs whose sensing domains bind small ligands and whose adjacent expression platforms contain RNA elements involved in the control of gene regulation. We now report on the ligand-bound structure of the Thermotoga petrophila fluoride riboswitch, which adopts a higher-order RNA architecture stabilized by pseudoknot and long-range reversed Watson-Crick and Hoogsteen A {sm_bullet} U pair formation. The bound fluoride ion is encapsulated within the junctional architecture, anchored in place through direct coordination to three Mg{sup 2+} ions, which in turn are octahedrallymore » coordinated to water molecules and five inwardly pointing backbone phosphates. Our structure of the fluoride riboswitch in the bound state shows how RNA can form a binding pocket selective for fluoride, while discriminating against larger halide ions. The T. petrophila fluoride riboswitch probably functions in gene regulation through a transcription termination mechanism.« less

Shocking Tails in the Major Merger Abell 2744

NASA Astrophysics Data System (ADS)

Owers, Matt S.; Couch, Warrick J.; Nulsen, Paul E. J.; Randall, Scott W.

2012-05-01

We identify four rare "jellyfish" galaxies in Hubble Space Telescope imagery of the major merger cluster Abell 2744. These galaxies harbor trails of star-forming knots and filaments which have formed in situ in gas tails stripped from the parent galaxies, indicating they are in the process of being transformed by the environment. Further evidence for rapid transformation in these galaxies comes from their optical spectra, which reveal starburst, poststarburst, and active galactic nucleus features. Most intriguingly, three of the jellyfish galaxies lie near intracluster medium features associated with a merging "Bullet-like" subcluster and its shock front detected in Chandra X-ray images. We suggest that the high-pressure merger environment may be responsible for the star formation in the gaseous tails. This provides observational evidence for the rapid transformation of galaxies during the violent core passage phase of a major cluster merger.

SHOCKING TAILS IN THE MAJOR MERGER ABELL 2744

DOE Office of Scientific and Technical Information (OSTI.GOV)

Owers, Matt S.; Couch, Warrick J.; Nulsen, Paul E. J.

We identify four rare 'jellyfish' galaxies in Hubble Space Telescope imagery of the major merger cluster Abell 2744. These galaxies harbor trails of star-forming knots and filaments which have formed in situ in gas tails stripped from the parent galaxies, indicating they are in the process of being transformed by the environment. Further evidence for rapid transformation in these galaxies comes from their optical spectra, which reveal starburst, poststarburst, and active galactic nucleus features. Most intriguingly, three of the jellyfish galaxies lie near intracluster medium features associated with a merging 'Bullet-like' subcluster and its shock front detected in Chandra X-raymore » images. We suggest that the high-pressure merger environment may be responsible for the star formation in the gaseous tails. This provides observational evidence for the rapid transformation of galaxies during the violent core passage phase of a major cluster merger.« less

Fluid pressure and flow at great depth in the continental crust. A discussion in relation to topography, temperature and salinity distribution using as an example the KTB Fault Zones in connection with the Eger Rift Hot Spot.

NASA Astrophysics Data System (ADS)

Kessels, W.; Kuhlmann, S.; Li, X.

2006-12-01

Hydraulic investigations in and between the two KTB boreholes have shown that groundwater flow is possible at great depth in the crystalline crust. Remarkable permeability was found particularly in the SE1 and SE2 fault zones. The results from a long term pump and injection test, and the related three-dimensional groundwater modelling (Graesle et al., 2006), document the existence of a large-scale (more than 10 km) hydraulic reservoir in the crystalline crust. According to this calculation, an overpressure of 0.4 MPa can be still be expected in KTB-HB in 2009, 4 years after the end of the injection. The good match with the measurement data confirms groundwater pathways at a scale of more than 10 km. The isotopic water composition recovered from the KTB pilot hole indicates a downward water flow along the SE2 fault zone, which is in contact with the Franconian Line. Moreover, there is a deep upward groundwater flow 60 km away in the western Eger Rift Valley as indicated e.g. by the temperature signature and gas flow observations. Therefore, the demand for fluid mass continuity means that water is being supplied by a downstream groundwater flow, probably from the Franconian Line. The question of potential driving processes must be answered to understand and quantify the flow in the deeper crust at a scale of 10 km to 100 km. The processes must result in a sufficient horizontal pressure gradient to allow groundwater flow at great depth. The density variations of groundwater with depth are highly relevant for the calculation of horizontal pressure differences. The two independent potential fields of gravity and pressure have to be considered. Differentiation into 4 relevant driving processes is required: \\bullet The groundwater surface topography related to the groundwater recharge and mean regional distance between neighbouring valleys \\bullet Geothermal gradient and water density depending on temperature and pressure \\bullet Different salt contents in adjacent geological formations \\bullet Gas content in the water and gas dissolution The interpretation of these processes for the Eger Rift Franconian Line area results in horizontal pressure gradients up to 0.5 MPa/km. With these pressure gradients in deep fault zones similar to the KTB fault zones SE1 and SE2, a remarkable groundwater flow is also possible in the deep crystalline crust. For only a 1 MPa pressure difference between the Franconian Line and the Eger Rift Valley, which lie nearly 60 km apart, we get a tracer velocity of 1.0 to 5.0 m/a (using the Darcy relation and porosities for the hydraulic KTB data). The flow system at great depth is determined mainly by the counteractive forces of salinity and temperature with a nonlinear relation to the water density. References GRAESLE, W., KESSELS, W., KUEMPEL, H.-J., LI, XUAN (2006): HYDRAULIC OBSERVATIONS FROM A ONE YEAR FLUID PRODUCTION TEST IN THE 4000 M DEEP KTB PILOT BOREHOLE. GEOFLUIDS, 6, 8 23 KESSELS, W., KUECK, J. (1995): HYDRAULIC COMMUNICATION IN CRYSTALLINE ROCK BETWEEN THE TWO BOREHOLES OF THE CONTINENTAL DEEP DRILLING PROJECT IN GERMANY. INT. J. ROCK MECH. MIN. SCI. &GEOMECH. ABSTR., 32, 37 47

A BRIGHT SUBMILLIMETER SOURCE IN THE BULLET CLUSTER (1E0657-56) FIELD DETECTED WITH BLAST

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rex, Marie; Devlin, Mark J.; Dicker, Simon R.

2009-09-20

We present the 250, 350, and 500 {mu}m detection of bright submillimeter emission in the direction of the Bullet Cluster measured by the Balloon-borne Large-Aperture Submillimeter Telescope (BLAST). The 500 {mu}m centroid is coincident with an AzTEC 1.1 mm point-source detection at a position close to the peak lensing magnification produced by the cluster. However, the 250 {mu}m and 350 {mu}m centroids are elongated and shifted toward the south with a differential shift between bands that cannot be explained by pointing uncertainties. We therefore conclude that the BLAST detection is likely contaminated by emission from foreground galaxies associated with themore » Bullet Cluster. The submillimeter redshift estimate based on 250-1100 {mu}m photometry at the position of the AzTEC source is z{sub phot} = 2.9{sup +0.6}{sub -0.3}, consistent with the infrared color redshift estimation of the most likely Infrared Array Camera counterpart. These flux densities indicate an apparent far-infrared (FIR) luminosity of L{sub FIR} = 2 x 10{sup 13} L {sub sun}. When the amplification due to the gravitational lensing of the cluster is removed, the intrinsic FIR luminosity of the source is found to be L{sub FIR} <= 10{sup 12} L{sub sun}, consistent with typical luminous infrared galaxies.« less

Chronic Lead Intoxication From Eating Wild-Harvested Game.

PubMed

Buenz, Eric J; Parry, Gareth J

2018-05-01

The purpose of this article is to determine if conversion from eating wild game harvested with lead-based ammunition to nonlead-based ammunition results in lower blood lead levels. Supersonic injection of toxin-leeching frangible projectiles into food is intuitively bad. As much as 95% of the ~13.7 million hunters in the United States choose shrapnel-inducing lead bullets to kill game; in addition, not harvesting meat is an incarcerable crime. A lead ammunition ban on certain federal lands was recently rescinded and the National Rifle Association refutes any risk from eating lead bullet-harvested game. A patient subsisting solely on lead-shot meat was converted to non-lead ammunition and his blood lead level tracked. Concomitant with his conversion to nonlead ammunition, a controlled experiment was performed using the patient's bullets to determine his daily lead intake from lead-shot meat. While eating lead-shot meat, the patient was consuming 259.3 ± 235.6 µg of lead daily and his blood lead level was 74.7 µg/dL. Conversion to nonlead ammunition was associated with a reduced blood lead level. Unsafe blood lead levels can occur from eating game harvested with lead ammunition. Physicians should warn hunting patients of this potential risk and counsel them about the availability of nonlead ammunition alternatives. Copyright © 2018 Elsevier Inc. All rights reserved.

Soil pollution at outdoor shooting ranges: Health effects, bioavailability and best management practices.

PubMed

Fayiga, A O; Saha, U K

2016-09-01

The total lead (Pb) concentrations of the surface soil, sub surface soil, vegetation and surface waters of outdoor shooting ranges are extremely high and above regulatory limits. Lead is dangerous at high concentrations and can cause a variety of serious health problems. Shooters and range workers are exposed to lead dust and can even take Pb dust home to their families while some animals around the shooting range can ingest the Pb bullets. The toxicity of Pb depends on its bioavailability which has been determined to be influenced greatly by the geochemical properties of each site. The bioavailability of Pb in shooting ranges has been found to be higher than other metal contaminated soils probably because of its very low residual Pb (<1%). Despite being an immobile element in the soil, migration of Pb within shooting ranges and offsite has been reported in literature. Best management practices to reduce mobility of Pb in shooting ranges involve an integrated Pb management program which has been described in the paper. The adoption of the non-toxic "green bullet" which has been developed to replace Pb bullets may reduce or prevent environmental pollution at shooting ranges. However, the contaminated soil resulting from decades of operation of several shooting ranges still needs to be restored to its natural state. Copyright © 2016 Elsevier Ltd. All rights reserved.

Effects of metastable species in helium and argon atmospheric pressure plasma jets (APPJs) on inactivation of periodontopathogenic bacteria

NASA Astrophysics Data System (ADS)

Yoon, Sung-Young; Kim, Kyoung-Hwa; Seol, Yang-Jo; Kim, Su-Jeong; Bae, Byeongjun; Huh, Sung-Ryul; Kim, Gon-Ho

2016-05-01

The helium and argon have been widely used as discharge gases in atmospheric pressure plasma jets (APPJs) for bacteria inactivation. The APPJs show apparent different in bullet propagation speed and bacteria inactivation rate apparently vary with discharge gas species. This work shows that these two distinctive features of APPJs can be linked through one factor, the metastable energy level. The effects of helium and argon metastable species on APPJ discharge mechanism for reactive oxygen nitrogen species (RONS) generation in APPJs are investigated by experiments and numerical estimation. The discharge mechanism is investigated by using the bullet velocity from the electric field which is obtained with laser induced fluorescence (LIF) measurement. The measured electric field also applied on the estimation of RONS generation, as electron energy source term in numerical particle reaction. The estimated RONS number is verified by comparing NO and OH densities to the inactivation rate of periodontitis bacteria. The characteristic time for bacteria inactivation of the helium-APPJ was found to be 1.63 min., which is significantly less than that of the argon-APPJ, 12.1 min. In argon-APPJ, the argon metastable preserve the energy due to the lack of the Penning ionization. Thus the surface temperature increase is significantly higher than helium-APPJ case. It implies that the metastable energy plays important role in both of APPJ bullet propagation and bacteria inactivation mechanism.

Abdominal perforation after rupture of a diamond-studded wire: a case report.

PubMed

Schmelzle, Moritz; Matthaei, Hanno; Tustas, Roy Y; Schmitt, Marcus; Müller-Mattheis, Volker; Linhart, Wolfgang; Eisenberger, Claus F; Knoefel, Wolfram T; Esch, Jan Schulte Am

2008-11-13

There are numerous cases of abdominal injuries due to bullets. Abdominal injuries due to bullets are a diagnostic and therapeutic challenge. Here, an unusual case of an abdominal perforation caused by a metal projectile, lead to confusion in the interpretation of the preoperative computer tomography. We present an unusual case of a 32-year-old male worker who sustained a "shot" to the left upper abdominal quadrant, as a result of a work-related accident. The projectile derived from a special wire that tore during operation. One chain element happened to accelerate towards the patients belly and perforated the abdominal wall. Computer tomography located the radiopaque projectile to the cortex of the left kidney and showed a lesion of the tail of the pancreas. The presence of intraperitoneal free air suggested a gastrointestinal perforation. Immediate open exploration of the peritoneal cavity and the retroperitoneal space revealed perforating lesions of the anterior and posterior gastric wall, as well as the pancreatic tail. The projectile was finally retrieved in the upper pole of the left kidney. The patient had a good clinical course subsequent to surgery and was discharged in good general condition. This case represents a rare form of a retained bullet injury and corroborates the need of sufficient measures of worker-protection in area of diamond-studded wire cutting devices.

Radio-emitting component kinematics in SS433

NASA Astrophysics Data System (ADS)

Stirling, A. M.; Jowett, F. H.; Spencer, R. E.; Paragi, Z.; Ogley, R. N.; Cawthorne, T. V.

2002-12-01

SS433 is a galactic X-ray binary source, variable across most wavelengths of observation. On arcsecond-scales the radio emission is composed of a bright core and the famous bipolar `corkscrew' radio jets. A series of MERLIN observations at 5 GHz were taken in 1991 December and 1992 January. The emission from the radio jet was categorized by replacing discrete features with Gaussian flux-density profiles. These fitted components were used to derive proper motions, ejection position-angles and ejection dates for evolving features in the jets. The observed component position-angles and ejection dates were compared to those predicted by the kinematic model of epoch 1989. The position-angle of the precession cone was refined to . A discrepancy was discovered in the observed precessional phase which was leading that of the kinematic model by 7-10 d. This observed discrepancy was in agreement with a transient deviation in precessional phase as measured by the redshifts of optical bullets at a similar time. Analysis of the proper motions of all the fitted components leads to a distance measurement of 4.61 +/- 0.35 pc. A pair of symmetrically ejected knots with a velocity much lower than 0.26c were also discovered. Their ejection time overlapped with a period of unusual Doppler shift residuals and fragmentation of optical bullets. These events may represent the first evidence for an interaction between radio components and optical bullets.

Magnetohydrodynamic Simulations of a Plunging Black Hole into a Molecular Cloud

NASA Astrophysics Data System (ADS)

Nomura, Mariko; Oka, Tomoharu; Yamada, Masaya; Takekawa, Shunya; Ohsuga, Ken; Takahashi, Hiroyuki R.; Asahina, Yuta

2018-05-01

Using two-dimensional magnetohydrodynamic simulations, we investigated the gas dynamics around a black hole (BH) plunging into a molecular cloud. In these calculations, we assumed a parallel-magnetic-field layer in the cloud. The size of the accelerated region is far larger than the Bondi–Hoyle–Lyttleton radius, being approximately inversely proportional to the Alfvén Mach number for the plunging BH. Our results successfully reproduce the “Y” shape in position–velocity maps of the “Bullet” in the W44 molecular cloud. The size of the Bullet is also reproduced within an order of magnitude using a reasonable parameter set. This consistency supports the shooting model of the Bullet, according to which an isolated BH plunged into a molecular cloud to form a compact broad-velocity-width feature.

Oligo-branched peptides for tumor targeting: from magic bullets to magic forks.

PubMed

Falciani, Chiara; Pini, Alessandro; Bracci, Luisa

2009-02-01

Selective targeting of tumor cells is the final goal of research and drug discovery for cancer diagnosis, imaging and therapy. After the invention of hybridoma technology, the concept of magic bullet was introduced into the field of oncology, referring to selective killing of tumor cells, by specific antibodies. More recently, small molecules and peptides have also been proposed as selective targeting agents. We analyze the state of the art of tumor-selective agents that are presently available and tested in clinical settings. A novel approach based on 'armed' oligo-branched peptides as tumor targeting agents, is discussed and compared with existing tumor-selective therapies mediated by antibodies, small molecules or monomeric peptides. Oligo-branched peptides could be novel drugs that combine the advantages of antibodies and small molecules.

[Blunt trauma with bullet-proof vests. Skin lesions are no reliable predictor of injury severity].

PubMed

Doll, D; Illert, B; Bohrer, S; Richter, C; Woelfl, C

2009-04-01

It is well known that so-called bullet-proof vests offer protection against a wide range of penetrating trauma, but their protection against blunt trauma is less well understood. Fast projectiles may result in hematomas and contusions behind the armour. We report a traffic accident involving a young soldier wearing a ballistic protection vest resulting in a right thoracoabdominal blunt trauma leading to a confined liver compression rupture. As nearly no skin marks were detectable, we point out that every emergency department surgeon should be very suspicious if a patient wore a ballistic vest at the time of the accident--there may be no skin marks despite severe intra-abdominal trauma. Our patient recovered following hypotensive ICU treatment, thrombocyte mobilization, and factor VIIa substitution.

Ocean Observations with EOS/MODIS: Algorithm Development and Post Launch Studies

NASA Technical Reports Server (NTRS)

Gordon, Howard R.; Conboy, Barbara (Technical Monitor)

1999-01-01

This separation has been logical thus far; however, as launch of AM-1 approaches, it must be recognized that many of these activities will shift emphasis from algorithm development to validation. For example, the second, third, and fifth bullets will become almost totally validation-focussed activities in the post-launch era, providing the core of our experimental validation effort. Work under the first bullet will continue into the post-launch time frame, driven in part by algorithm deficiencies revealed as a result of validation activities. Prior to the start of the 1999 fiscal year (FY99) we were requested to prepare a brief plan for our FY99 activities. This plan is included as Appendix 1. The present report describes the progress made on our planned activities.

Extra-Articular Retained Missiles; Is Surveillance of Lead Levels Needed?

PubMed

Nickel, Walter N; Steelman, Theodore J; Sabath, Zena R; Potter, Benjamin K

2018-03-01

Although gunshot wounds are relatively common, lead toxicity associated with extra-articular retained missiles (EARMs) is an uncommon, yet potentially devastating, complication. Although the risk of lead toxicity with intra-articular retained missiles is well known, EARMs are routinely left in situ or only removed in selected circumstances secondary to the relatively rare occurrence of complications. We first describe a patient with systemic lead poisoning associated with retained lead fragments after a gunshot-induced left femoral shaft fracture. We then performed a systematic review of the literature to answer the following questions: (1) In the setting of retained extra-articular bullets and/or bullet fragments, is regular monitoring and/or surveillance of lead levels in the blood routinely indicated? and, if so, (2) what are the selected factors that portend an increased risk for elevations in blood lead levels in the setting of retained extra-articular bullets and/or bullet fragments? The systematic review was conducted according to the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) reporting guidelines, of the English language literature utilizing Medline (PubMed), EMBASE, Cochrane, and CINAHL on the topic of lead poisoning, retained bullet, and gunshot wound, and then searched for additional references by manually searching of bibliographies of the included references. Studies were included if they provided clinical data on one or both of our study questions; included studies were evaluated using the accepted levels of evidence. Routine monitoring or surveillance of lead levels in blood is recommended in all cases of EARM at the time of hospital admission and again at discharge, followed by monthly intervals until 3 mo post-injury and then again at 1 yr post-injury. The studies identified demonstrated significant risk factors for elevated blood lead levels in the setting of EARM, which included the number of retained missiles and concomitant fracture. Recommendations for routine monitoring and surveillance of blood lead levels in all cases of EARM are conflicting, but such monitoring appears to be warranted given that the potential risks and morbidity associated with systemic lead poisoning are outweighed by any potential harm of short-term, blood lead level monitoring. Outside of concomitant fracture, the evidence for making further clinical recommendations regarding selected risk factors that portend an increased risk for elevated blood lead levels after gunshot injury is weak. Larger level II and III studies are needed to determine the indications for and frequency of lead toxicity screening after retained EARM. Published by Oxford University Press on behalf of the Association of Military Surgeons of the United States 2018. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Inexpensive Time-of-Flight Velocity Measurements.

ERIC Educational Resources Information Center

Everett, Glen E.; Wild, R. L.

1979-01-01

Describes a circuit designed to measure time-of-flight velocity and shows how to use it to determine bullet velocity in connection with the ballistic pendulum demonstration of momentum conservation. (Author/GA)

NuSTAR observations of the bullet cluster: constraints on inverse Compton emission

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wik, Daniel R.; Hornstrup, A.; Molendi, S.

2014-08-13

Here, the search for diffuse non-thermal inverse Compton (IC) emission from galaxy clusters at hard X-ray energies has been undertaken with many instruments, with most detections being either of low significance or controversial. Because all prior telescopes sensitive at E > 10 keV do not focus light and have degree-scale fields of view, their backgrounds are both high and difficult to characterize. The associated uncertainties result in lower sensitivity to IC emission and a greater chance of false detection. In this work, we present 266 ks NuSTAR observations of the Bullet cluster, which is detected in the energy range 3-30more » keV. NuSTAR's unprecedented hard X-ray focusing capability largely eliminates confusion between diffuse IC and point sources; however, at the highest energies, the background still dominates and must be well understood. To this end, we have developed a complete background model constructed of physically inspired components constrained by extragalactic survey field observations, the specific parameters of which are derived locally from data in non-source regions of target observations. Applying the background model to the Bullet cluster data, we find that the spectrum is well—but not perfectly—described as an isothermal plasma with kT = 14.2 ± 0.2 keV. To slightly improve the fit, a second temperature component is added, which appears to account for lower temperature emission from the cool core, pushing the primary component to kT ~ 15.3 keV. We see no convincing need to invoke an IC component to describe the spectrum of the Bullet cluster, and instead argue that it is dominated at all energies by emission from purely thermal gas. The conservatively derived 90% upper limit on the IC flux of 1.1 × 10 –12 erg s –1 cm –2 (50-100 keV), implying a lower limit on B ≳ 0.2 μG, is barely consistent with detected fluxes previously reported. In addition to discussing the possible origin of this discrepancy, we remark on the potential implications of this analysis for the prospects for detecting IC in galaxy clusters in the future.« less

Gun-shot injuries in UK military casualties - Features associated with wound severity.

PubMed

Penn-Barwell, Jowan G; Sargeant, Ian D

2016-05-01

Surgical treatment of high-energy gun-shot wounds (GSWs) to the extremities is challenging. Recent surgical doctrine states that wound tracts from high-energy GSWs should be laid open, however the experience from previous conflicts suggests that some of these injuries can be managed more conservatively. The aim of this study is to firstly characterise the GSW injuries sustained by UK forces, and secondly test the hypothesis that the likely severity of GSWs can be predicted by features of the wound. The UK Military trauma registry was searched for cases injured by GSW in the five years between 01 January 2009 and 31 December 2013: only UK personnel were included. Clinical notes and radiographs were then reviewed. Features associated with energy transfer in extremity wounds in survivors were further examined with number of wound debridements used as a surrogate marker of wound severity. There were 450 cases who met the inclusion criteria. 96 (21%) were fatally injured, with 354 (79%) surviving their injuries. Casualties in the fatality group had a median New Injury Severity Score (NISS) of 75 (IQR 75-75), while the median NISS of the survivors was 12 (IQR 4-48) with 10 survivors having a NISS of 75. In survivors the limbs were most commonly injured (56%). 'Through and through' wounds, where the bullet passes intact through the body, were strongly associated with less requirement for debridement (p<0.0001). When a bullet fragmented there was a significant association with a requirement for a greater number of wound debridements (p=0.0002), as there was if a bullet fractured a bone (p=0.0006). More complex wounds, as indicated by the requirement for repeated debridements, are associated with injuries where the bullet does not pass straight through the body, or where a bone is fractured. Gunshot wounds should be assessed according to the likely energy transferred, extremity wounds without features of high energy transfer do not require extensive exploration. Crown Copyright © 2016. Published by Elsevier Ltd. All rights reserved.

Ground Squirrel Shooting and Potential Lead Exposure in Breeding Avian Scavengers

PubMed Central

Eagles-Smith, Collin A.; Wagner, Mason T.

2016-01-01

Recreational ground squirrel shooting is a popular activity throughout the western United States and serves as a tool for managing ground squirrel populations in agricultural regions. Belding’s ground squirrels (Spermophilus beldingi) are routinely shot in California, Nevada, and Oregon across habitats that overlap with breeding avian scavengers. Ground squirrels shot with lead (Pb)-based bullets may pose a risk to avian scavengers if they consume carcasses containing Pb fragments. To assess the potential risk to breeding avian scavengers we developed a model to estimate the number, mass, and distribution of Pb fragments in shot ground squirrels using radiographic images. Eighty percent of shot carcasses contained detectible Pb fragments with an average of 38.6 mg of Pb fragments. Seven percent of all carcasses contained Pb fragment masses exceeding a lethal dose for a model raptor nestling (e.g. American kestrel Falco sparverius). Bullet type did not influence the number of fragments in shot ground squirrels, but did influence the mass of fragments retained. Belding’s ground squirrels shot with .17 Super Mag and unknown ammunition types contained over 28 and 17 times more mass of Pb fragments than those shot with .22 solid and .22 hollow point bullets, respectively. Ground squirrel body mass was positively correlated with both the number and mass of Pb fragments in carcasses, increasing on average by 76% and 56% respectively across the range of carcass masses. Although the mass of Pb retained in ground squirrel carcasses was small relative to the original bullet mass, avian scavenger nestlings that frequently consume shot ground squirrels may be at risk for Pb-induced effects (e.g., physiology, growth, or survival). Using modeling efforts we found that if nestling golden eagles (Aquila chrysaetos), red-tailed hawks (Buteo jamaicensis), and Swainson’s hawks (B. swainsoni) consumed shot ground squirrels proportionately to the nestling’s mass, energy needs, and diet, 100% of the nestling period would exceed a 50% reduction in delta-aminolevulinic acid dehydratase production threshold, the last 13–27% of the nestling stage would exceed a reduced growth rate threshold, but no nestlings would be expected to exceed a level of Pb ingestion that would be lethal. PMID:27942006

Ground squirrel shooting and potential lead exposure in breeding avian scavengers

USGS Publications Warehouse

Herring, Garth; Eagles-Smith, Collin A.; Wagner, Mason T.

2016-01-01

Recreational ground squirrel shooting is a popular activity throughout the western United States and serves as a tool for managing ground squirrel populations in agricultural regions. Belding’s ground squirrels (Spermophilus beldingi) are routinely shot in California, Nevada, and Oregon across habitats that overlap with breeding avian scavengers. Ground squirrels shot with lead (Pb)-based bullets may pose a risk to avian scavengers if they consume carcasses containing Pb fragments. To assess the potential risk to breeding avian scavengers we developed a model to estimate the number, mass, and distribution of Pb fragments in shot ground squirrels using radiographic images. Eighty percent of shot carcasses contained detectible Pb fragments with an average of 38.6 mg of Pb fragments. Seven percent of all carcasses contained Pb fragment masses exceeding a lethal dose for a model raptor nestling (e.g. American kestrel Falco sparverius). Bullet type did not influence the number of fragments in shot ground squirrels, but did influence the mass of fragments retained. Belding’s ground squirrels shot with .17 Super Mag and unknown ammunition types contained over 28 and 17 times more mass of Pb fragments than those shot with .22 solid and .22 hollow point bullets, respectively. Ground squirrel body mass was positively correlated with both the number and mass of Pb fragments in carcasses, increasing on average by 76% and 56% respectively across the range of carcass masses. Although the mass of Pb retained in ground squirrel carcasses was small relative to the original bullet mass, avian scavenger nestlings that frequently consume shot ground squirrels may be at risk for Pb-induced effects (e.g., physiology, growth, or survival). Using modeling efforts we found that if nestling golden eagles (Aquila chrysaetos), red-tailed hawks (Buteo jamaicensis), and Swainson’s hawks (B. swainsoni) consumed shot ground squirrels proportionately to the nestling’s mass, energy needs, and diet, 100% of the nestling period would exceed a 50% reduction in delta-aminolevulinic acid dehydratase production threshold, the last 13–27% of the nestling stage would exceed a reduced growth rate threshold, but no nestlings would be expected to exceed a level of Pb ingestion that would be lethal.

Virtual animation of victim-specific 3D models obtained from CT scans for forensic reconstructions: Living and dead subjects.

PubMed

Villa, C; Olsen, K B; Hansen, S H

2017-09-01

Post-mortem CT scanning (PMCT) has been introduced at several forensic medical institutions many years ago and has proved to be a useful tool. 3D models of bones, skin, internal organs and bullet paths can rapidly be generated using post-processing software. These 3D models reflect the individual physiognomics and can be used to create whole-body 3D virtual animations. In such way, virtual reconstructions of the probable ante-mortem postures of victims can be constructed and contribute to understand the sequence of events. This procedure is demonstrated in two victims of gunshot injuries. Case #1 was a man showing three perforating gunshot wounds, who died due to the injuries of the incident. Whole-body PMCT was performed and 3D reconstructions of bones, relevant internal organs and bullet paths were generated. Using 3ds Max software and a human anatomy 3D model, a virtual animated body was built and probable ante-mortem postures visualized. Case #2 was a man presenting three perforating gunshot wounds, who survived the incident: one in the left arm and two in the thorax. Only CT scans of the thorax, abdomen and the injured arm were provided by the hospital. Therefore, a whole-body 3D model reflecting the anatomical proportions of the patient was made combining the actual bones of the victim with those obtained from the human anatomy 3D model. The resulted 3D model was used for the animation process. Several probable postures were also visualized in this case. It has be shown that in Case #1 the lesions and the bullet path were not consistent with an upright standing position; instead, the victim was slightly bent forward, i.e. he was sitting or running when he was shot. In Case #2, one of the bullets could have passed through the arm and continued into the thorax. In conclusion, specialized 3D modelling and animation techniques allow for the reconstruction of ante-mortem postures based on both PMCT and clinical CT. Copyright © 2017 Elsevier B.V. All rights reserved.

Cold plasma welding of polyaniline nanofibers with enhanced electrical and mechanical properties.

PubMed

Ye, Dong; Yu, Yao; Liu, Lin; Lu, Xinpei; Wu, Yue

2015-12-11

Joining conducting polymer (CP) nanofibers into an interconnected porous network can result in good mechanical and electrical contacts between nanofibers that can be beneficial for the high performance of CP-based devices. Here, we demonstrate the cold welding of polyaniline (PAni) nanofiber loose ends with cold plasma. The room-temperature and atmospheric-pressure helium micro-plasma jet launches highly charged ion bullets at a PAni nanofiber target with high precision and the highly charged ion bullet selectively induces field emission at the sharp nanofiber loose ends. This technique joins nanofiber tips without altering the morphology of the film and protonation thus leading to significantly enhanced electrical and mechanical properties. In addition, this technique has high spatial resolution and is able to selectively weld and dope regions of nanofiber film with promising novel device applications.

Cold plasma welding of polyaniline nanofibers with enhanced electrical and mechanical properties

NASA Astrophysics Data System (ADS)

Ye, Dong; Yu, Yao; Liu, Lin; Lu, Xinpei; Wu, Yue

2015-12-01

Joining conducting polymer (CP) nanofibers into an interconnected porous network can result in good mechanical and electrical contacts between nanofibers that can be beneficial for the high performance of CP-based devices. Here, we demonstrate the cold welding of polyaniline (PAni) nanofiber loose ends with cold plasma. The room-temperature and atmospheric-pressure helium micro-plasma jet launches highly charged ion bullets at a PAni nanofiber target with high precision and the highly charged ion bullet selectively induces field emission at the sharp nanofiber loose ends. This technique joins nanofiber tips without altering the morphology of the film and protonation thus leading to significantly enhanced electrical and mechanical properties. In addition, this technique has high spatial resolution and is able to selectively weld and dope regions of nanofiber film with promising novel device applications.

Penetrating gunshot wound to the head: transotic approach to remove the bullet and masseteric-facial nerve anastomosis for early facial reanimation.

PubMed

Donnarumma, Pasquale; Tarantino, Roberto; Gennaro, Paolo; Mitro, Valeria; Valentini, Valentino; Magliulo, Giuseppe; Delfini, Roberto

2014-01-01

Gunshot wounds to the head (GSWH) account for the majority of penetrating brain injuries, and are the most lethal. Since they are rare in Europe, the number of neurosurgeons who have experienced this type of traumatic injury is decreasing, and fewer cases are reported in the literature. We describe a case of gunshot to the temporal bone in which the bullet penetrated the skull resulting in the facial nerve paralysis. It was excised with the transotic approach. Microsurgical anastomosis among the masseteric nerve and the facial nerve was performed. GSWH are often devastating. The in-hospital mortality for civilians with penetrating craniocerebral injury is very high. Survivors often have high rate of complications. When facial paralysis is present, masseteric-facial direct neurorraphy represent a good treatment.

[The role of the comprehensive approach for the characteristic of the destructive effect of a non-lethal cartridge with two rubber bullets].

PubMed

Stragis, V B; Makarov, I Yu; Karelin, V V; Shevchuk, D Yu; Chechenin, E S

This article was designed to report the results of forensic medical, criminalistics, and comprehensive expertise of the subject who suffered from a non-perforating shotgun wound affecting the soft tissues and blood vessels in the femoral region. It was shown that only the scrutinous comprehensive full-scale expert examination of the injured site in the framework of forensic medical expertise makes it possible to exclude the probability of the expert error and formulate the reliable and substantiated conclusion as regards the fact and the conditions of the shotgun injury by a concrete type of the cartridge (e.g. having a caliber equal to 410/76 Stopper-2) with two spherical rubber bullets fired from a known weapon (Saiga-410S hunting carbine).

Comparison of Physics Frameworks for WebGL-Based Game Engine

NASA Astrophysics Data System (ADS)

Yogya, Resa; Kosala, Raymond

2014-03-01

Recently, a new technology called WebGL shows a lot of potentials for developing games. However since this technology is still new, there are still many potentials in the game development area that are not explored yet. This paper tries to uncover the potential of integrating physics frameworks with WebGL technology in a game engine for developing 2D or 3D games. Specifically we integrated three open source physics frameworks: Bullet, Cannon, and JigLib into a WebGL-based game engine. Using experiment, we assessed these frameworks in terms of their correctness or accuracy, performance, completeness and compatibility. The results show that it is possible to integrate open source physics frameworks into a WebGLbased game engine, and Bullet is the best physics framework to be integrated into the WebGL-based game engine.

Cases of death caused by gas or warning firearms.

PubMed

Rothschild, M A; Maxeiner, H; Schneider, V

1994-01-01

Five cases of lethal injuries caused by gas or warning firearms are discussed. In one suicide case a modified weapon (elongated barrel) and steel bullets were used to fire a shot into the head, the bullets lodged in the skull and lethal bleeding resulted. In the other cases conventional gas weapons without evidence of alteration were used for contact shots; injuries were caused by the effect of propelling powder gases. Two of these cases were suicides (temporal contact shot and back of the neck contact shot), one was an accident (inguinal contact shot with lethal bleeding), and one was an attack by another person with a contact shot against the neck with bilateral tears of the hypopharynx. After successful surgery, a delayed death occurred 12 days later caused by bleeding into the airways from the ruptured external carotid artery.

Thienopyrazine-based low-bandgap polymers for flexible polymer solar cells

NASA Astrophysics Data System (ADS)

Sensfuss, S.; Blankenburg, L.; Schache, H.; Shokhovets, S.; Erb, T.; Konkin, A.; Herasimovich, A.; Scheinert, S.; Shahid, M.; Sell, S.; Klemm, E.

2010-09-01

The optical gaps of the low-bandgap PPVs (PM-20, PM-19, PM-18) are decreased down to 1.6-1.7 eV compared with that of MDMO-PPV (2.2 eV). The best lateral hole mobility was determined to be 2.1 × 10-3 cm2/V s (PM-18) in field effect transistors and exceeds that of MDMO-PPV (poly-[ 2-methoxy-5-(3'^'.7'^'-dimethyloctyloxy)-1.4-phenylenevinylene], 8.5 × 10-4 cm2/V s). This allows to reduce the PCBM ([6.6]-phenyl-C61(71)-butanoic acid methyl ester) content in solar cell devices down to 1:2 w/w giving a better η_AM1.5 than for MDMO-PPV:[60]-PCBM cells (PM-19:[60]-PCBM 2.32% on ITO-PET, 2.86% on ITO glass). The charge transfer to PCBM as acceptor occurs quite normally and shows an effective charge separation using light-induced spin resonance spectroscopy (LESR). The [70]-PCBM-bullet signals are shifted to lower field related to those of [60]-PCBM-bullet and overlap more with the polaron signal of PM-19. The LESR g-factor components of [70]-PCBM-bullet are reported for the first time. The external quantum efficiency peak values achieve up to 42% at 350-400 nm and 26% at 640 nm (PM-19:[60]-PCBM).

Facile green fabrication of nanostructure ZnO plates, bullets, flower, prismatic tip, closed pine cone: Their antibacterial, antioxidant, photoluminescent and photocatalytic properties.

PubMed

Madan, H R; Sharma, S C; Udayabhanu; Suresh, D; Vidya, Y S; Nagabhushana, H; Rajanaik, H; Anantharaju, K S; Prashantha, S C; Sadananda Maiya, P

2016-01-05

Green synthesis of multifunctional Zinc oxide nanoparticles (NPs) with a variety of morphologies were achieved by low temperature solution combustion route employing neem (Azadirachta indica) extract as fuel. The nanoparticles were characterized by PXRD, FTIR, XPS, Raman and UV-Visible spectroscopic studies. The Morphologies were studied by SEM and TEM analysis. The NPs were subjected for photoluminescence, photocatalytic, antibacterial and antioxidant activity studies. PXRD pattern confirmed the hexagonal wurtzite structure of the product. SEM images indicated the transformation of mushroom like hexagonal disks to bullets, buds, cones, bundles and closed pine cone structured NPs with increase in the concentration of neem extract in reaction mixture. The NPs exhibited prominent green emission due to the presence of intrinsic defect centers. The as-formed bullet shaped ZnO with 4ml of neem extract was found to decolorize Methylene blue (MB) under Sunlight and UV light irradiation. The antibacterial studies indicated that ZnO NPs of concentration 500, 750 and 1000μg resulted in significant antibacterial activity on Klebsiella aerogenes and Staphylococcus aureus but not against Escherichia coli and Pseudomonas aeruginosa in agar well diffusion method. Further, ZnO NPs exhibited significant antioxidant activity against scavenging DPPH free radicals. The current investigation demonstrated green engineering method for the synthesis of multifunctional ZnO NPs with interesting morphologies using neem extract. Copyright © 2015 Elsevier B.V. All rights reserved.

The cubic-quintic-septic complex Ginzburg-Landau equation formulation of optical pulse propagation in 3D doped Kerr media with higher-order dispersions

NASA Astrophysics Data System (ADS)

Djoko, Martin; Kofane, T. C.

2018-06-01

We investigate the propagation characteristics and stabilization of generalized-Gaussian pulse in highly nonlinear homogeneous media with higher-order dispersion terms. The optical pulse propagation has been modeled by the higher-order (3+1)-dimensional cubic-quintic-septic complex Ginzburg-Landau [(3+1)D CQS-CGL] equation. We have used the variational method to find a set of differential equations characterizing the variation of the pulse parameters in fiber optic-links. The variational equations we obtained have been integrated numerically by the means of the fourth-order Runge-Kutta (RK4) method, which also allows us to investigate the evolution of the generalized-Gaussian beam and the pulse evolution along an optical doped fiber. Then, we have solved the original nonlinear (3+1)D CQS-CGL equation with the split-step Fourier method (SSFM), and compare the results with those obtained, using the variational approach. A good agreement between analytical and numerical methods is observed. The evolution of the generalized-Gaussian beam has shown oscillatory propagation, and bell-shaped dissipative optical bullets have been obtained under certain parameter values in both anomalous and normal chromatic dispersion regimes. Using the natural control parameter of the solution as it evolves, named the total energy Q, our numerical simulations reveal the existence of 3D stable vortex dissipative light bullets, 3D stable spatiotemporal optical soliton, stationary and pulsating optical bullets, depending on the used initial input condition (symmetric or elliptic).

A pilot study of simple interventions to improve informed consent in clinical research: feasibility, approach, and results.

PubMed

Kass, Nancy E; Taylor, Holly A; Ali, Joseph; Hallez, Kristina; Chaisson, Lelia

2015-02-01

Research suggests that participants do not always adequately understand studies. While some consent interventions increase understanding, methodologic challenges have been raised in studying consent outside of actual trial settings. This study examined the feasibility of testing two consent interventions in actual studies and measured effectiveness of interventions in improving understanding. Participants enrolling in any of eight ongoing clinical trials were sequentially assigned to one of three different informed consent strategies for enrollment in their clinical trial. Control participants received standard consent procedures for their trial. Participants in the first intervention arm received a bulleted fact sheet summarizing key study information. Participants in the second intervention arm received the bulleted fact sheet and also engaged in a feedback Q&A session. Later, patients answered closed- and open-ended questions to assess patient understanding and literacy. Descriptive statistics, Wilcoxon -Mann -Whitney and Kruskal-Wallis tests were generated to assess correlations; regression analysis determined predictors of understanding. 144 participants enrolled. Using regression analysis, participants receiving the second intervention scored 7.6 percentage points higher (p = .02) on open-ended questions about understanding than participants in the control, although unadjusted comparisons did not reach statistical significance. Our study supports the hypothesis that patients receiving both bulleted fact sheets and a Q&A session had higher understanding compared to standard consent. Fact sheets and short structured dialog are quick to administer and easy to replicate across studies and should be tested in larger samples. © The Author(s) 2014.

Suicidal single gunshot injury to the head: differences in site of entrance wound and direction of the bullet path between right- and left-handed--an autopsy study.

PubMed

Nikolić, Slobodan; Zivković, Vladimir; Babić, Dragan; Juković, Fehim

2012-03-01

The aim of this study was to determine the differences in the anatomical site of a gunshot entrance wound and the direction of the bullet path between right- and left-handed subjects who committed a suicide by a single gunshot injury to the head. The retrospective autopsy study was performed for a 10-year period, and it included selected cases of single suicidal gunshot head injury, committed by handguns. We considered only contact or near-contact wounds. The sample included 479 deceased, with average age 47.1 ± 19.1 years (range, 12-89 years): 432 males and 47 females, with 317 right-handed, 25 left-handed, and 137 subjects with unknown dominant hand. In our observed sample, most cases involved the right temple as the site of entrance gunshot wound (about 67%), followed by the mouth (16%), forehead (7%), left temple (6%), submental (2%), and parietal region (1%). The left temple, right temple, and forehead were the sites of the gunshot entrance wounds, which were the best predictors of the handedness of the deceased (Spearman ρ = 0.149, P = 0.006). Our study showed that the direction of the bullet intracranial path in cases of suicide was even a more potent predictor of the handedness of the deceased (Spearman ρ = 0.263, P = 0.000; Wald = 149.503, P = 0.000).

Inviscid Analysis of Extended Formation Flight

NASA Technical Reports Server (NTRS)

Kless, James; Aftosmis, Michael J.; Ning, Simeon Andrew; Nemec, Marian

2012-01-01

Flying airplanes in extended formations, with separation distances of tens of wingspans, significantly improves safety while maintaining most of the fuel savings achieved in close formations. The present study investigates the impact of roll trim and compressibility at fixed lift coefficient on the benefits of extended formation flight. An Euler solver with adjoint-based mesh refinement combined with a wake propagation model is used to analyze a two-body echelon formation at a separation distance of 30 spans. Two geometries are examined: a simple wing and a wing-body geometry. Energy savings, quantified by both formation drag fraction and span efficiency factor, are investigated at subsonic and transonic speeds for a matrix of vortex locations. The results show that at fixed lift and trimmed for roll, the optimal location of vortex impingement is about 10% inboard of the trailing airplane s wing-tip. Interestingly, early results show the variation in drag fraction reduction is small in the neighborhood of the optimal position. Over 90% of energy benefits can be obtained with a 5% variation in transverse and 10% variation in crossflow directions. Early results suggest control surface deflections required to achieve trim reduce the benefits of formation flight by 3-5% at subsonic speeds. The final paper will include transonic effects and trim on extended formation flight drag benefits.

An investigation into the factors that influence toolmark identifications on ammunition discharged from semi-automatic pistols recovered from car fires.

PubMed

Collender, Mark A; Doherty, Kevin A J; Stanton, Kenneth T

2017-01-01

Following a shooting incident where a vehicle is used to convey the culprits to and from the scene, both the getaway car and the firearm are often deliberately burned in an attempt to destroy any forensic evidence which may be subsequently recovered. Here we investigate the factors that influence the ability to make toolmark identifications on ammunition discharged from pistols recovered from such car fires. This work was carried out by conducting a number of controlled furnace tests in conjunction with real car fire tests in which three 9mm semi-automatic pistols were burned. Comparisons between pre-burn and post burn test fired ammunition discharged from these pistols were then performed to establish if identifications were still possible. The surfaces of the furnace heated samples and car fire samples were examined following heating/burning to establish what factors had influenced their surface morphology. The primary influence on the surfaces of the furnace heated and car fire samples was the formation of oxide layers. The car fire samples were altered to a greater extent than the furnace heated samples. Identifications were still possible between pre- and post-burn discharged cartridge cases, but this was not the case for the discharged bullets. It is suggested that the reason for this is a difference between the types of firearms discharge-generated toolmarks impressed onto the base of cartridge cases compared to those striated along the surfaces of bullets. It was also found that the temperatures recorded in the front foot wells were considerably less than those recorded on top of the rear seats during the car fires. These factors should be assessed by forensic firearms examiners when performing casework involving pistols recovered from car fires. Copyright © 2016 The Chartered Society of Forensic Sciences. Published by Elsevier Ireland Ltd. All rights reserved.

Superhydrophobic Natural and Artificial Surfaces—A Structural Approach

PubMed Central

Avrămescu, Roxana-Elena; Ghica, Mihaela Violeta; Dinu-Pîrvu, Cristina; Prisada, Răzvan; Popa, Lăcrămioara

2018-01-01

Since ancient times humans observed animal and plants features and tried to adapt them according to their own needs. Biomimetics represents the foundation of many inventions from various fields: From transportation devices (helicopter, airplane, submarine) and flying techniques, to sports’ wear industry (swimming suits, scuba diving gear, Velcro closure system), bullet proof vests made from Kevlar etc. It is true that nature provides numerous noteworthy models (shark skin, spider web, lotus leaves), referring both to the plant and animal kingdom. This review paper summarizes a few of “nature’s interventions” in human evolution, regarding understanding of surface wettability and development of innovative special surfaces. Empirical models are described in order to reveal the science behind special wettable surfaces (superhydrophobic /superhydrophilic). Materials and methods used in order to artificially obtain special wettable surfaces are described in correlation with plants’ and animals’ unique features. Emphasis is placed on joining superhydrophobic and superhydrophilic surfaces, with important applications in cell culturing, microorganism isolation/separation and molecule screening techniques. Bio-inspired wettability is presented as a constitutive part of traditional devices/systems, intended to improve their characteristics and extend performances. PMID:29789488

Superhydrophobic Natural and Artificial Surfaces-A Structural Approach.

PubMed

Avrămescu, Roxana-Elena; Ghica, Mihaela Violeta; Dinu-Pîrvu, Cristina; Prisada, Răzvan; Popa, Lăcrămioara

2018-05-22

Since ancient times humans observed animal and plants features and tried to adapt them according to their own needs. Biomimetics represents the foundation of many inventions from various fields: From transportation devices (helicopter, airplane, submarine) and flying techniques, to sports' wear industry (swimming suits, scuba diving gear, Velcro closure system), bullet proof vests made from Kevlar etc. It is true that nature provides numerous noteworthy models (shark skin, spider web, lotus leaves), referring both to the plant and animal kingdom. This review paper summarizes a few of "nature's interventions" in human evolution, regarding understanding of surface wettability and development of innovative special surfaces. Empirical models are described in order to reveal the science behind special wettable surfaces (superhydrophobic /superhydrophilic). Materials and methods used in order to artificially obtain special wettable surfaces are described in correlation with plants' and animals' unique features. Emphasis is placed on joining superhydrophobic and superhydrophilic surfaces, with important applications in cell culturing, microorganism isolation/separation and molecule screening techniques. Bio-inspired wettability is presented as a constitutive part of traditional devices/systems, intended to improve their characteristics and extend performances.

Splinters and Other Foreign Bodies in the Skin

MedlinePlus

... FBs: Bullets, BBs, nails, sewing needles, pins, tacks. Fiberglass spicules. Fishhooks: May have a barbed point that ... need removal Tiny plant stickers, cactus spines, or fiberglass spicules that need removal Minor sliver, splinter, or ...

A first proposal for a general description model of forensic traces

NASA Astrophysics Data System (ADS)

Lindauer, Ina; Schäler, Martin; Vielhauer, Claus; Saake, Gunter; Hildebrandt, Mario

2012-06-01

In recent years, the amount of digitally captured traces at crime scenes increased rapidly. There are various kinds of such traces, like pick marks on locks, latent fingerprints on various surfaces as well as different micro traces. Those traces are different from each other not only in kind but also in which information they provide. Every kind of trace has its own properties (e.g., minutiae for fingerprints, or raking traces for locks) but there are also large amounts of metadata which all traces have in common like location, time and other additional information in relation to crime scenes. For selected types of crime scene traces, type-specific databases already exist, such as the ViCLAS for sexual offences, the IBIS for ballistic forensics or the AFIS for fingerprints. These existing forensic databases strongly differ in the trace description models. For forensic experts it would be beneficial to work with only one database capable of handling all possible forensic traces acquired at a crime scene. This is especially the case when different kinds of traces are interrelated (e.g., fingerprints and ballistic marks on a bullet casing). Unfortunately, current research on interrelated traces as well as general forensic data models and structures is not mature enough to build such an encompassing forensic database. Nevertheless, recent advances in the field of contact-less scanning make it possible to acquire different kinds of traces with the same device. Therefore the data of these traces is structured similarly what simplifies the design of a general forensic data model for different kinds of traces. In this paper we introduce a first common description model for different forensic trace types. Furthermore, we apply for selected trace types from the well established database schema development process the phases of transferring expert knowledge in the corresponding forensic fields into an extendible, database-driven, generalised forensic description model. The trace types considered here are fingerprint traces, traces at locks, micro traces and ballistic traces. Based on these basic trace types, also combined traces (multiple or overlapped fingerprints, fingerprints on bullet casings, etc) and partial traces are considered.

Characterization of the spawning habitat of Atlantic bluefin tuna and related species in the Balearic Sea (western Mediterranean)

NASA Astrophysics Data System (ADS)

Alemany, F.; Quintanilla, L.; Velez-Belchí, P.; García, A.; Cortés, D.; Rodríguez, J. M.; Fernández de Puelles, M. L.; González-Pola, C.; López-Jurado, J. L.

2010-07-01

Within the framework of the TUNIBAL project that focused on Atlantic bluefin tuna ( Thunnus thynnus) larval ecology, ichthyoplankton surveys were conducted from 2001 to 2005 off the Balearic archipelago, which is recognized as one of the main spawning areas of the eastern Atlantic stock of this species. In each survey, a regular sampling grid of about 200 stations, 10 nautical miles apart were sampled. CTD casts and oblique Bongo 60 and surface Bongo 90 plankton tows were carried out. The occurrence frequencies of Atlantic bluefin tuna, albacore tuna ( Thunnus alalunga) and bullet tuna ( Auxis rochei) larvae in quantitative Bongo 60 samples were 0.14, 0.29 and 0.49 respectively. Mean larval abundances in these positive samples were relatively high: 31 larvae 10 m -2 for Atlantic bluefin tuna, 17 for albacore tuna and 31 for bullet tuna. All species had patchy distributions since more than 90% of the stations showed larval densities under 10 larvae 100 m -3 (70% showed even less than 2 larvae 100 m -3), whereas in some isolated spots, we recorded abundances as high as 867 (Atlantic bluefin) or 872 (bullet tuna) larvae 10 m -2. These results allowed us to relate larval distribution to mesoscale hydrographic features and to characterize the spawning habitat of these species. Single Quotient Parameter analyses were applied to spatial (depth), physical (temperature, salinity, dissolved oxygen and geostrophic current velocities) and biological (mesozooplankton biomass) variables to determine the environmental preferences of each species for spawning. Results showed that the complex hydrodynamic scenarios around the Balearic Islands, due to the interaction between the inflowing surface Atlantic water masses (AW) and Mediterranean surface waters (MW), play a key role in determining the abundance and distribution of tuna larvae in this area, especially in the case of Atlantic bluefin tuna. Spawning of this species seems to take place mainly in offshore mixed waters, as suggested by their preferences for waters with salinities between 36.9 and 37.7, located near frontal areas in the confluence of AW and MW. Atlantic bluefin tuna start to spawn once sea surface temperatures (SST) are over 20.5 °C, and preferentially in the range of 21.5-26.5 °C. Its larval distribution suggests that spawners reach the Balearic Sea in association with the inflowing AW. However, bullet tuna and albacore tuna larvae, species whose Mediterranean stocks stay in this sea year round, had a more widespread distribution and were found both in MW and AW. Bullet tuna starts to spawn in shallower waters near the shelf break once the SST reaches 19 °C, and shows significant preferences for waters over 23.5 °C. Similar to Atlantic bluefin tuna, albacore tuna spawn in offshore waters, but its spawning peak is later than its congeneric species, since it has a significant preference for even warmer waters, over 27 °C.

OMC-1 as Revealed by HST NICMOS Polarization Measurements

NASA Astrophysics Data System (ADS)

Simpson, J. P.; Burton, M. G.; Colgan, S. W. J.; Erickson, E. F.; Schultz, A. S. B.; Simpson, E.

2004-12-01

The Orion Molecular Cloud (OMC-1) harbors the nearest and most studied massive star-forming region. Signs of the formation of multiple stars in this optically obscured region include powerful CO outflows, H2O and SiO maser emission, remarkable H2 "bullets", "fingers", and "streamers", and X-rays from pre-main-sequence stars. Highly polarized clouds indicate that the illuminating sources lie in the directions of the Becklin-Neugebauer object (BN), and stars in the vicinity of IRc2, radio source I, NIR source n, and others. Here we present 2 μ m polarization measurements of positions north and south of BN made with NICMOS Camera 2 on the Hubble Space Telescope. Near-infrared starlight can be polarized by scattering from nearby dust grains and by dichroic absorption by non-spherical dust grains aligned by a magnetic field. Within the 19'' field of view of Camera 2, BN appears to be the illuminating source of most of the nebulosity to its north; however, the material to the south is illuminated either by a star near I (IRc4) or by source n (IRc2B). Source n also illuminates material 1'' - 2'' to its northeast and southwest, at the same position angles as the extended radio source at the same location. We discuss possible interpretations of the strong polarization of IRc7, which is not illuminated by source I. We also display several stars (NICMOS point sources) that are the source of their own polarization, which ranges up to 40% and occurs at distinctly different angles from the polarization of the immediately surrounding diffuse emission. This may be caused by dichroic absorption and scattering in edge-on circumstellar disks. At least two faint stars are variable. Support for proposal 9752 was provided by NASA through a grant from the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS5-26555.

Interdisciplinary research career development: building interdisciplinary research careers in women's health program best practices.

PubMed

Domino, Steven E; Bodurtha, Joann; Nagel, Joan D

2011-11-01

The Office of Research on Women's Health (ORWH) and the National Institutes of Health (NIH) Institutes and Centers and the Agency for Health Care Research and Quality (AHRQ) have sponsored an interdisciplinary research career development program in five funding cycles since 2000 through a K12 mechanism titled "Building Interdisciplinary Research Careers in Women's Health (BIRCWH)." As of 2010, 407 scholars have been supported in interdisciplinary women's health research and a total of 63 BIRCWH program awards have been made to 41 institutions across the U.S. In an effort to share practical approaches to interdisciplinary research training, currently funded BIRCWH sites were invited to submit 300-word bullet-point style summaries describing their best practices in interdisciplinary research training following a common format with an emphasis on practices that are innovative, can be reproduced in other places, and advance women's health research. Twenty-six program narratives provide unique perspectives along with common elements and themes in interdisciplinary research training best practices.

21 CFR 341.76 - Labeling of bronchodilator drug products.

Code of Federal Regulations, 2014 CFR

2014-04-01

... doctor or pharmacist before taking this product.” (2) The following information shall appear after the... subheading “Ask a doctor or pharmacist before use if you are” [in bold type]: (i) “[Bullet] taking...

21 CFR 341.76 - Labeling of bronchodilator drug products.

Code of Federal Regulations, 2012 CFR

2012-04-01

... doctor or pharmacist before taking this product.” (2) The following information shall appear after the... subheading “Ask a doctor or pharmacist before use if you are” [in bold type]: (i) “[Bullet] taking...

21 CFR 341.76 - Labeling of bronchodilator drug products.

Code of Federal Regulations, 2013 CFR

2013-04-01

... doctor or pharmacist before taking this product.” (2) The following information shall appear after the... subheading “Ask a doctor or pharmacist before use if you are” [in bold type]: (i) “[Bullet] taking...

Targeting the latest hallmark of cancer: another attempt at 'magic bullet' drugs targeting cancers' metabolic phenotype.

PubMed

Cuperlovic-Culf, M; Culf, A S; Touaibia, M; Lefort, N

2012-10-01

The metabolism of tumors is remarkably different from the metabolism of corresponding normal cells and tissues. Metabolic alterations are initiated by oncogenes and are required for malignant transformation, allowing cancer cells to resist some cell death signals while producing energy and fulfilling their biosynthetic needs with limiting resources. The distinct metabolic phenotype of cancers provides an interesting avenue for treatment, potentially with minimal side effects. As many cancers show similar metabolic characteristics, drugs targeting the cancer metabolic phenotype are, perhaps optimistically, expected to be 'magic bullet' treatments. Over the last few years there have been a number of potential drugs developed to specifically target cancer metabolism. Several of these drugs are currently in clinical and preclinical trials. This review outlines examples of drugs developed for different targets of significance to cancer metabolism, with a focus on small molecule leads, chemical biology and clinical results for these drugs.

Numerical Simulations of Light Bullets, Using The Full Vector, Time Dependent, Nonlinear Maxwell Equations

NASA Technical Reports Server (NTRS)

Goorjian, Peter M.; Silberberg, Yaron; Kwak, Dochan (Technical Monitor)

1994-01-01

This paper will present results in computational nonlinear optics. An algorithm will be described that solves the full vector nonlinear Maxwell's equations exactly without the approximations that are currently made. Present methods solve a reduced scalar wave equation, namely the nonlinear Schrodinger equation, and neglect the optical carrier. Also, results will be shown of calculations of 2-D electromagnetic nonlinear waves computed by directly integrating in time the nonlinear vector Maxwell's equations. The results will include simulations of 'light bullet' like pulses. Here diffraction and dispersion will be counteracted by nonlinear effects. The time integration efficiently implements linear and nonlinear convolutions for the electric polarization, and can take into account such quantum effects as Kerr and Raman interactions. The present approach is robust and should permit modeling 2-D and 3-D optical soliton propagation, scattering, and switching directly from the full-vector Maxwell's equations.

Removal of 10-nm contaminant particles from Si wafers using CO2 bullet particles.

PubMed

Kim, Inho; Hwang, Kwangseok; Lee, Jinwon

2012-04-11

Removal of nanometer-sized contaminant particles (CPs) from substrates is essential in successful fabrication of nanoscale devices. The particle beam technique that uses nanometer-sized bullet particles (BPs) moving at supersonic velocity was improved by operating it at room temperature to achieve higher velocity and size uniformity of BPs and was successfully used to remove CPs as small as 10 nm. CO2 BPs were generated by gas-phase nucleation and growth in a supersonic nozzle; appropriate size and velocity of the BPs were obtained by optimizing the nozzle contours and CO2/He mixture fraction. Cleaning efficiency greater than 95% was attained. BP velocity was the most important parameter affecting removal of CPs in the 10-nm size range. Compared to cryogenic Ar or N2 particles, CO2 BPs were more uniform in size and had higher velocity and, therefore, cleaned CPs more effectively.

[The forensic medical characteristic of the factors associated with a shot from the 9.0 mm pneumatic rifle and the inflicted injuries].

PubMed

Raĭzberg, S A; Makarov, I Iu; Lorents, A S

2014-01-01

The objective of the present work was to elucidate the structural characteristics of the 9.0 mm pneumatic rifle and three regular types of the bullets differing in the head shape fired from it. Morphological features of the injuries inflicted by such bullets are described in conjunction with the peculiarities of precipitation of the shot products in their projection as the prerequisites for their objective differentiation. Results: The study allowed to reveal the composition of the gunshot residues and to determine the maximum distance of their distribution. The specific features of experimental damage inflicted by the shots from the 9.0 mm pneumatic rifle to the coarse white calico fabric targets were shown to depend on the shot range. The objective signs of the so-called "short-range" shot from the 9.0 mm pneumatic rifle were described for the first time.

The case of James A. Garfield: a historical perspective.

PubMed

Weiner, Bradley K

2003-05-15

In 1881, President James A. Garfield was shot in the back and died 79 days later. During this time, many controversies arose that had repercussions for years to come. Who was to manage the President's care? A prominent local physician took on the case, but after Garfield's death, he was highly criticized for inappropriate care and for excluding more highly qualified surgeons. Where was the bullet? Multiple opinions were given including that of Alexander Graham Bell. The correct suggestion turned out to be that of a young, unknown assistant demonstrator of anatomy. What was the proper treatment? Local wound care, removal of the bullet, and laparotomy all were considered. Many have felt that the choice of treatment may have proved to be worse than the injury itself. What did the autopsy show? Even this was controversial, with different observers claiming different results. This historical perspective reviews the case as well the controversies that surrounded it.

Location precision analysis of stereo thermal anti-sniper detection system

NASA Astrophysics Data System (ADS)

He, Yuqing; Lu, Ya; Zhang, Xiaoyan; Jin, Weiqi

2012-06-01

Anti-sniper detection devices are the urgent requirement in modern warfare. The precision of the anti-sniper detection system is especially important. This paper discusses the location precision analysis of the anti-sniper detection system based on the dual-thermal imaging system. It mainly discusses the following two aspects which produce the error: the digital quantitative effects of the camera; effect of estimating the coordinate of bullet trajectory according to the infrared images in the process of image matching. The formula of the error analysis is deduced according to the method of stereovision model and digital quantitative effects of the camera. From this, we can get the relationship of the detecting accuracy corresponding to the system's parameters. The analysis in this paper provides the theory basis for the error compensation algorithms which are put forward to improve the accuracy of 3D reconstruction of the bullet trajectory in the anti-sniper detection devices.

Automated Firearms Identification System (AFIDS), phase 1

NASA Technical Reports Server (NTRS)

Blackwell, R. J.; Framan, E. P.

1974-01-01

Items critical to the future development of an automated firearms identification system (AFIDS) have been examined, with the following specific results: (1) Types of objective data, that can be utilized to help establish a more factual basis for determining identity and nonidentity between pairs of fired bullets, have been identified. (2) A simulation study has indicated that randomly produced lines, similar in nature to the individual striations on a fired bullet, can be modeled and that random sequences, when compared to each other, have predictable relationships. (3) A schematic diagram of the general concept for AFIDS has been developed and individual elements of this system have been briefly tested for feasibility. Future implementation of such a proposed system will depend on such factors as speed, utility, projected total cost and user requirements for growth. The success of the proposed system, when operational, would depend heavily on existing firearms examiners.

The drone ambulance [A-UAS]: golden bullet or just a blank?

PubMed

Van de Voorde, P; Gautama, S; Momont, A; Ionescu, C M; De Paepe, P; Fraeyman, N

2017-07-01

Defibrillation within the first minutes after sudden cardiac arrest can save many quality-adjusted life years. Yet, despite enormous investments, 'healthcare' is still unable to provide this for the majority of patients. Emergency Medical Services often have a too long mean response time and many issues surround Public Access Defibrillation programs. In this article we argument that AED-equipped drones could be the 'magic bullet'. They are easily deployed and fast, and have a relatively low operational cost. As such they could rapidly bring an AED next to the victim, irrespective of most geographical circumstances, give visual feedback and situational awareness to the EMS dispatcher and thus assist a bystander to provide better CPR. Although there are many real-life barriers to actual deployment, we argument these might all get solved once we have solved the described technological issues. Copyright © 2017 Elsevier B.V. All rights reserved.

Supersonic projectile models for asynchronous shooter localization

NASA Astrophysics Data System (ADS)

Kozick, Richard J.; Whipps, Gene T.; Ash, Joshua N.

2011-06-01

In this work we consider the localization of a gunshot using a distributed sensor network measuring time differences of arrival between a firearm's muzzle blast and the shockwave induced by a supersonic bullet. This so-called MB-SW approach is desirable because time synchronization is not required between the sensors, however it suffers from increased computational complexity and requires knowledge of the bullet's velocity at all points along its trajectory. While the actual velocity profile of a particular gunshot is unknown, one may use a parameterized model for the velocity profile and simultaneously fit the model and localize the shooter. In this paper we study efficient solutions for the localization problem and identify deceleration models that trade off localization accuracy and computational complexity. We also develop a statistical analysis that includes bias due to mismatch between the true and actual deceleration models and covariance due to additive noise.

Passive infrared bullet detection and tracking

DOEpatents

Karr, Thomas J.

1997-01-01

An apparatus and method for passively detecting a projectile such as, for example, a bullet using a passive infrared detector. A passive infrared detector is focused onto a region in which a projectile is expected to be located. Successive images of infrared radiation in the region are recorded. Background infrared radiation present in the region is suppressed such that second successive images of infrared radiation generated by the projectile as the projectile passes through the region are produced. A projectile path calculator determines the path and other aspects of the projectile by using the second successive images of infrared radiation generated by the projectile. The present invention, in certain embodiments, also determines the origin of the path of the projectile and takes a photograph of the area surrounding the origin and/or fires at least one projectile at the area surrounding the origin of the path of the projectile.

Passive infrared bullet detection and tracking

DOEpatents

Karr, T.J.

1997-01-21

An apparatus and method for passively detecting a projectile such as, for example, a bullet using a passive infrared detector. A passive infrared detector is focused onto a region in which a projectile is expected to be located. Successive images of infrared radiation in the region are recorded. Background infrared radiation present in the region is suppressed such that second successive images of infrared radiation generated by the projectile as the projectile passes through the region are produced. A projectile path calculator determines the path and other aspects of the projectile by using the second successive images of infrared radiation generated by the projectile. The present invention, in certain embodiments, also determines the origin of the path of the projectile and takes a photograph of the area surrounding the origin and/or fires at least one projectile at the area surrounding the origin of the path of the projectile. 9 figs.

Pseudotumor cerebri (toxic effect of the "magic bullet").

PubMed

Alemayehu, W

1995-10-01

A 10 year-old female patient presented to the outpatient unit of the ophthalmology department of Menelik II Hospital with complaints of inward deviation of the left eye, of three weeks' duration. The patient was on a mega dose of vitamin A 200,000 I.U. (the "magic bullet") daily for two months prior to the onset of the present illness. Physical examination revealed left sixth nerve palsy and bilateral papilloedema in an alert and oriented patient without localizing neurologic findings. The cerebrospinal fluid pressure ( > 250 mm water) was increased and skull X-ray findings were suggestive of increased intracranial pressure (IIP). This case meets the modified Dandy criteria except that a highly likely cause, hypervitaminosis A, is associated. Therefore, a diagnosis of Idiopathic Intracranial Hypertension (IIH) or Pseudotumor Cerebri was made. This disorder and its management is discussed and literature reviewed. The serious and potentially blinding toxic effect of Vitamin A, if consumed in excessive amounts, is emphasized.

Numerical Simulations of Light Bullets, Using The Full Vector, Time Dependent, Nonlinear Maxwell Equations

NASA Technical Reports Server (NTRS)

Goorjian, Peter M.; Silberberg, Yaron; Kwak, Dochan (Technical Monitor)

1995-01-01

This paper will present results in computational nonlinear optics. An algorithm will be described that solves the full vector nonlinear Maxwell's equations exactly without the approximations that we currently made. Present methods solve a reduced scalar wave equation, namely the nonlinear Schrodinger equation, and neglect the optical carrier. Also, results will be shown of calculations of 2-D electromagnetic nonlinear waves computed by directly integrating in time the nonlinear vector Maxwell's equations. The results will include simulations of 'light bullet' like pulses. Here diffraction and dispersion will be counteracted by nonlinear effects. The time integration efficiently implements linear and nonlinear convolutions for the electric polarization, and can take into account such quantum effects as Karr and Raman interactions. The present approach is robust and should permit modeling 2-D and 3-D optical soliton propagation, scattering, and switching directly from the full-vector Maxwell's equations.

A bright, dust-obscured, millimetre-selected galaxy beyond the Bullet Cluster (1E0657-56)

NASA Astrophysics Data System (ADS)

Wilson, G. W.; Hughes, D. H.; Aretxaga, I.; Ezawa, H.; Austermann, J. E.; Doyle, S.; Ferrusca, D.; Hernández-Curiel, I.; Kawabe, R.; Kitayama, T.; Kohno, K.; Kuboi, A.; Matsuo, H.; Mauskopf, P. D.; Murakoshi, Y.; Montaña, A.; Natarajan, P.; Oshima, T.; Ota, N.; Perera, T. A.; Rand, J.; Scott, K. S.; Tanaka, K.; Tsuboi, M.; Williams, C. C.; Yamaguchi, N.; Yun, M. S.

2008-11-01

Deep 1.1mm continuum observations of 1E0657-56 (the `Bullet Cluster') taken with the millimeter-wavelength camera AzTEC on the 10-m Atacama Submillimeter Telescope Experiment (ASTE), have revealed an extremely bright (S1.1mm = 15.9mJy) unresolved source. This source, MMJ065837-5557.0, lies close to a maximum in the density of underlying mass distribution, towards the larger of the two interacting clusters as traced by the weak-lensing analysis of Clowe et al. Using optical-infrared (IR) colours, we argue that MMJ065837-5557.0 lies at a redshift of z = 2.7 +/- 0.2. A lensing-derived mass model for the Bullet Cluster shows a critical line (caustic) of magnification within a few arcsec of the AzTEC source, sufficient to amplify the intrinsic millimetre-wavelength flux of the AzTEC galaxy by a factor of >>20. After subtraction of the foreground cluster emission at 1.1mm due to the Sunyaev-Zel'dovich effect, and correcting for the magnification, the rest-frame far-IR luminosity of MMJ065837-5557.0 is <=1012Lsolar, characteristic of a luminous infrared galaxy (LIRG). We explore various scenarios to explain the colours, morphologies and positional offsets between the potential optical and IR counterparts, and their relationship with MMJ065837-5557.0. Until higher resolution and more sensitive (sub)millimetre observations are available, the detection of background galaxies close to the caustics of massive lensing clusters offers the only opportunity to study this intrinsically faint millimetre-galaxy population.

Applications of surface metrology in firearm identification

NASA Astrophysics Data System (ADS)

Zheng, X.; Soons, J.; Vorburger, T. V.; Song, J.; Renegar, T.; Thompson, R.

2014-01-01

Surface metrology is commonly used to characterize functional engineering surfaces. The technologies developed offer opportunities to improve forensic toolmark identification. Toolmarks are created when a hard surface, the tool, comes into contact with a softer surface and causes plastic deformation. Toolmarks are commonly found on fired bullets and cartridge cases. Trained firearms examiners use these toolmarks to link an evidence bullet or cartridge case to a specific firearm, which can lead to a criminal conviction. Currently, identification is typically based on qualitative visual comparison by a trained examiner using a comparison microscope. In 2009, a report by the National Academies called this method into question. Amongst other issues, they questioned the objectivity of visual toolmark identification by firearms examiners. The National Academies recommended the development of objective toolmark identification criteria and confidence limits. The National Institute of Standards and Technology (NIST) have applied its experience in surface metrology to develop objective identification criteria, measurement methods, and reference artefacts for toolmark identification. NIST developed the Standard Reference Material SRM 2460 standard bullet and SRM 2461 standard cartridge case to facilitate quality control and traceability of identifications performed in crime laboratories. Objectivity is improved through measurement of surface topography and application of unambiguous surface similarity metrics, such as the maximum value (ACCFMAX) of the areal cross correlation function. Case studies were performed on consecutively manufactured tools, such as gun barrels and breech faces, to demonstrate that, even in this worst case scenario, all the tested tools imparted unique surface topographies that were identifiable. These studies provide scientific support for toolmark evidence admissibility in criminal court cases.

Localization of firearm projectiles in the human body using a superconducting quantum interference device magnetometer: A theoretical study

NASA Astrophysics Data System (ADS)

Hall Barbosa, C.

2004-06-01

A technique had been previously developed, based on magnetic field measurements using a superconducting quantum interference device sensor, to localize in three dimensions steel needles lost in the human body. In all six cases that were treated until now, the technique allowed easy surgical localization of the needles with high accuracy. The technique decreases, by a large factor, the surgery time for foreign body extraction, and also reduces the generally high odds of failure. The method is accurate, noninvasive, and innocuous, and with clear clinical importance. Despite the importance of needle localization, the most prevalent foreign body in the modern society is the firearm projectile (bullet), generally composed of lead, a paramagnetic material, thus not presenting a remanent magnetic field as steel needles do. On the other hand, since lead is a good conductor, eddy current detection techniques can be employed, by applying an alternating magnetic field with the aid of excitation coils. The primary field induces eddy currents on the lead, which in turn generate a secondary magnetic field that can be detected by a magnetometer, and give information about position and volume of the conducting foreign body. In this article we present a theoretical study for the development of a localization technique for lead bullets inside the human body. Initially, we present a model for the secondary magnetic field generated by the bullet, given a known applied field. After that, we study possible excitation systems, and propose a localization algorithm based on the detected magnetic field.

An experimental-finite element analysis on the kinetic energy absorption capacity of polyvinyl alcohol sponge.

PubMed

Karimi, Alireza; Navidbakhsh, Mahdi; Razaghi, Reza

2014-06-01

Polyvinyl alcohol (PVA) sponge is in widespread use for biomedical and tissue engineering applications owing to its biocompatibility, availability, relative cheapness, and excellent mechanical properties. This study reports a novel concept of design in energy absorbing materials which consist in the use of PVA sponge as an alternative reinforcement material to enhance the energy loss of impact loads. An experimental study is carried out to measure the mechanical properties of the PVA sponge under uniaxial loading. The kinetic energy absorption capacity of the PVA sponge is computed by a hexahedral finite element (FE) model of the steel ball and bullet through the LS-DYNA code under impact load at three different thicknesses (5, 10, 15mm). The results show that a higher sponge thickness invokes a higher energy loss of the steel ball and bullet. The highest energy loss of the steel ball and bullet is observed for the thickest sponge with 160 and 35J, respectively. The most common type of traumatic brain injury in which the head subject to impact load causes the brain to move within the skull and consequently brain hemorrhaging. These results suggest the application of the PVA sponge as a great kinetic energy absorber material compared to commonly used expanded polystyrene foams (EPS) to absorb most of the impact energy and reduces the transmitted load. The results might have implications not only for understanding of the mechanical properties of PVA sponge but also for use as an alternative reinforcement material in helmet and packaging material design. Copyright © 2014 Elsevier B.V. All rights reserved.

4 Other Ways to Quit Smoking Besides Using Medication

Cancer.gov

There are other ways to quit smoking besides cold turkey and medication. Medications are a good tool, but they’re not a magic bullet. Boost your chances of quitting and staying quit by using these other proven methods.

21 CFR 201.71 - Magnesium labeling.

Code of Federal Regulations, 2014 CFR

2014-04-01

... disease [bullet] a magnesium-restricted diet”. The warnings in §§ 201.64(c), 201.70(c), 201.71(c), and 201...., a magnesium or potassium-restricted diet. 1 See § 201.66(b)(4) of this chapter for definition of...

21 CFR 201.71 - Magnesium labeling.

Code of Federal Regulations, 2012 CFR

2012-04-01

... disease [bullet] a magnesium-restricted diet”. The warnings in §§ 201.64(c), 201.70(c), 201.71(c), and 201...., a magnesium or potassium-restricted diet. 1 See § 201.66(b)(4) of this chapter for definition of...

21 CFR 201.71 - Magnesium labeling.

Code of Federal Regulations, 2013 CFR

2013-04-01

... disease [bullet] a magnesium-restricted diet”. The warnings in §§ 201.64(c), 201.70(c), 201.71(c), and 201...., a magnesium or potassium-restricted diet. 1 See § 201.66(b)(4) of this chapter for definition of...

50 CFR 21.53 - Control order for purple swamphens.

Code of Federal Regulations, 2010 CFR

2010-10-01

... may leave them in place. No one may retain for personal use, offer for sale, or sell a purple swamphen..., you may use only nontoxic shot or nontoxic bullets for the control. (4) If, while operating under this...

50 CFR 21.53 - Control order for purple swamphens.

Code of Federal Regulations, 2013 CFR

2013-10-01

... may leave them in place. No one may retain for personal use, offer for sale, or sell a purple swamphen..., you may use only nontoxic shot or nontoxic bullets for the control. (4) If, while operating under this...

50 CFR 21.53 - Control order for purple swamphens.

Code of Federal Regulations, 2012 CFR

2012-10-01

... may leave them in place. No one may retain for personal use, offer for sale, or sell a purple swamphen..., you may use only nontoxic shot or nontoxic bullets for the control. (4) If, while operating under this...

50 CFR 21.53 - Control order for purple swamphens.

Code of Federal Regulations, 2014 CFR

2014-10-01

... may leave them in place. No one may retain for personal use, offer for sale, or sell a purple swamphen..., you may use only nontoxic shot or nontoxic bullets for the control. (4) If, while operating under this...

50 CFR 21.53 - Control order for purple swamphens.

Code of Federal Regulations, 2011 CFR

2011-10-01

... may leave them in place. No one may retain for personal use, offer for sale, or sell a purple swamphen..., you may use only nontoxic shot or nontoxic bullets for the control. (4) If, while operating under this...

21 CFR 335.50 - Labeling of antidiarrheal drug products.

Code of Federal Regulations, 2014 CFR

2014-04-01

... problem”. (iii) “Ask a doctor or pharmacist before use if you are taking any drug for [bullet...). (i) “Ask a doctor or pharmacist before use if you are taking any other drugs. Try to use at least 3...

21 CFR 335.50 - Labeling of antidiarrheal drug products.

Code of Federal Regulations, 2012 CFR

2012-04-01

... problem”. (iii) “Ask a doctor or pharmacist before use if you are taking any drug for [bullet...). (i) “Ask a doctor or pharmacist before use if you are taking any other drugs. Try to use at least 3...

21 CFR 335.50 - Labeling of antidiarrheal drug products.

Code of Federal Regulations, 2011 CFR

2011-04-01

... problem”. (iii) “Ask a doctor or pharmacist before use if you are taking any drug for [bullet...). (i) “Ask a doctor or pharmacist before use if you are taking any other drugs. Try to use at least 3...

21 CFR 335.50 - Labeling of antidiarrheal drug products.

Code of Federal Regulations, 2013 CFR

2013-04-01

... problem”. (iii) “Ask a doctor or pharmacist before use if you are taking any drug for [bullet...). (i) “Ask a doctor or pharmacist before use if you are taking any other drugs. Try to use at least 3...

21 CFR 335.50 - Labeling of antidiarrheal drug products.

Code of Federal Regulations, 2010 CFR

2010-04-01

... problem”. (iii) “Ask a doctor or pharmacist before use if you are taking any drug for [bullet...). (i) “Ask a doctor or pharmacist before use if you are taking any other drugs. Try to use at least 3...

A Report on the Industry: Construction

DTIC Science & Technology

2004-06-01

Japan Bullet Train, Tokyo to Nagoya, Japan Yokuska Naval Base, Yokuska, Japan Army Corps of Engineers, Japan District, Yokuska, Japan Maglev ...million to help build the high-speed MAGLEV magnetic train system linking Shanghai and the new international airport. Private investment is so

Loss of glyphosate efficacy: a changing weed spectrum in Georgia cotton

USDA-ARS?s Scientific Manuscript database

Introduction of glyphosate resistance into crops through genetic modification has revolutionized crop protection. Glyphosate, the proverbial silver bullet, is a broad spectrum herbicide with favorable environmental characteristics and effective broad-spectrum weed control that has greatly improved ...

77 FR 67644 - Examination Rating System

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-13

... entities are to be evaluated included a list of ``evaluative factors'' relating to the particular component... revisions or additions to the evaluative factors or the components, which are described briefly below. Under the ``Capital'' component, FHFA has revised the fourth bullet paragraph of evaluative factors...

Profiling Bad Apples.

ERIC Educational Resources Information Center

LaFee, Scott

2000-01-01

Many school administrators want to develop profiling procedures to identify violence-prone students before bullets start flying. Warning signs (chronic depression, anger, abusive home conditions, violent history) are a staring point. Two FBI agents recommend visiting classrooms, identifying troubled kids, and ensuring that they get help. (MLH)

Bullet Train.

ERIC Educational Resources Information Center

Galagan, Patricia A.

1999-01-01

Knowledge Universe is a conglomerate that includes an assortment of training companies, a chain of child-care centers, a knowledge-management consulting business, and an educational toy maker. KU's mission includes building human capital from birth to post-retirement, providing lifelong learning opportunities, and helping businesses use the power…

Subcaliber discarding sabot airgun projectiles.

PubMed

Frank, Matthias; Schönekeß, Holger; Herbst, Jörg; Staats, Hans-Georg; Ekkernkamp, Axel; Nguyen, Thanh Tien; Bockholdt, Britta

2014-03-01

Medical literature abounds with reports on injuries and fatalities caused by airgun projectiles. While round balls or diabolo pellets have been the standard projectiles for airguns for decades, today, there are a large number of different airgun projectiles available. A very uncommon--and until now unique--discarding sabot airgun projectile (Sussex Sabo Bullet) was introduced into the market in the 1980s. The projectile, available in 0.177 (4.5 mm) and 0.22 (5.5 mm) caliber, consists of a plastic sabot cup surrounding a subcaliber copper-coated lead projectile in typical bullet shape. Following the typical principle of a discarding sabot projectile, the lightweight sabot is supposed to quickly loose velocity and to fall to the ground downrange while the bullet continues on target. These sabot-loaded projectiles are of special forensic interest due to their non-traceability and ballistic parameters. Therefore, it is the aim of this work to investigate the ballistic performance of these sabot airgun projectiles by high-speed video analyses and by measurement of the kinetic parameters of the projectile parts by a transient recording system as well as observing their physical features after being fired. While the sabot principle worked properly in high-energy airguns (E > 17 J), separation of the core projectile from the sabot cup was also observed when discharged in low-energy airguns (E < 7.5 J). While the velocity of the discarded Sussex Sabo core projectile was very close to the velocity of a diabolo-type reference projectile (RWS Meisterkugel), energy density was up to 60 % higher. To conclude, this work is the first study to demonstrate the regular function of this uncommon type of airgun projectile.

Performance of primary repair on colon injuries sustained from low-versus high-energy projectiles.

PubMed

Lazovic, Ranko; Radojevic, Nemanja; Curovic, Ivana

2016-04-01

Among various reasons, colon injuries may be caused by low- or high-energy firearm bullets, with the latter producing a temporary cavitation phenomenon. The available treatment options include primary repair and two-stage management, but recent studies have shown that primary repair can be widely used with a high success rate. This paper investigates the differences in performance of primary repair on these two types of colon injuries. Two groups of patients who sustained colon injuries due to single gunshot wounds, were retrospectively categorized based on the type of bullet. Primary colon repair was performed in all patients selected based on the inclusion and exclusion criteria (Stone and Fabian's criteria). An almost absolute homogeneity was attained among the groups in terms of age, latent time before surgery, and four trauma indexes. Only one patient from the low-energy firearm projectile group (4%) developed a postsurgical complication versus nine patients (25.8%) from the high-energy group, showing statistically significant difference (p = 0.03). These nine patients experienced the following postsurgical complications: pneumonia, abscess, fistula, suture leakage, and one multiorgan failure with sepsis. Previous studies concluded that one-stage primary repair is the best treatment option for colon injuries. However, terminal ballistics testing determined the projectile's path through the body and revealed that low-energy projectiles caused considerably lesser damage than their high-energy counterparts. Primary colon repair must be performed definitely for low-energy short firearm injuries but very carefully for high-energy injuries. Given these findings, we suggest that the treatment option should be determined based not only on the bullet type alone but also on other clinical findings. Copyright © 2016 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

A systematic review of military head injuries.

PubMed

Carr, Debra J; Lewis, E; Horsfall, I

2017-02-01

This commissioned review discusses military head injuries caused by non-ballistic impacts, penetrating fragments and bullets (including parts of bullets) and behind helmet blunt trauma (BHBT). A systematic review of the literature was conducted using the Preferred Reporting Items for Systematic Reviews and Meta-Analyses method. The openly accessible literature was reviewed to investigate military head injuries and their severity. Fifty-four sources were identified that included pertinent openly accessible information relevant to this topic. Limited injury data exist for non-ballistic head injuries for UK forces, although some international data exist for parachutists. The majority of fatal head injuries are due to projectiles penetrating through the face rather than through the area of the head covered by the helmet. Penetrating head injuries are primarily caused by fragments, but helmets are more commonly perforated by high-energy rifle bullets than by fragments. No reports of a BHBT injury have been located in the literature. The description of body segment varies among articles and this makes comparisons among datasets difficult. There is a lack of detail regarding the precise position and severity of injuries, and long-term outcome for casualties. It is demonstrated that wearing military helmets reduces fatalities on and off the battlefield. The risk of BHBT injuries is widely referred to, but evidence of their occurrence is not provided by the authors that describe the risk of BHBT occurring. Further research into the causes and severity of head injuries would be useful for designers of military helmets and other associated personal protective equipment, particularly as advances in materials technology means lighter, thinner and more protective helmets are achievable. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Cardiac missiles. A review of the literature and personal experience.

PubMed Central

Symbas, P N; Picone, A L; Hatcher, C R; Vlasis-Hale, S E

1990-01-01

The management of retained missiles in the heart is still controversial. In an attempt to define the issue more clearly, the reported cases in the English literature from 1940 to 1988 (group 1) and our experience from 1968 to 1988 (group 2) were reviewed. In group 1 there were 222 missiles retained in the hearts of 201 patients. The retained missiles were 45 bullets in 45 patients, 109 shrapnel in 99 patients, 18 pellets in 7 patients, and 50 unidentified missiles in 50 patients. Thirteen of the missiles were completely embedded intramyocardial missiles, 122 were partially intramyocardial, 47 were free in a cardiac chamber, and 40 were intrapericardial. One hundred four of the missiles were removed and 118 were left in place. In group 2 there were 24 missiles, 18 bullets, 1 bullet fragment, and 5 pellets retained in the hearts of 24 patients. Ten missiles were removed, no attempt was made in 13 patients, and an unsuccessful attempt was made to remove one other. From group 1 patients, 6 died, 2 with intracavitary missiles, 3 patients with partially intramyocardial, and 1 patient with an intrapericardial missile, all of whom had either unsuccessful or no attempt to remove the missile. Twenty-seven patients had symptoms, all of whom, except two, had either unsuccessful or no attempt to remove the missile. All group 2 patients did well and had been free of symptoms related to the missiles. This review suggests that the management of missiles in the heart should be individualized according to the patient's clinical course, the site, shape, and size of the missile, and that in selected patients missiles in the heart are tolerated well. PMID:2187422

Cardiac missiles. A review of the literature and personal experience.

PubMed

Symbas, P N; Picone, A L; Hatcher, C R; Vlasis-Hale, S E

1990-05-01

The management of retained missiles in the heart is still controversial. In an attempt to define the issue more clearly, the reported cases in the English literature from 1940 to 1988 (group 1) and our experience from 1968 to 1988 (group 2) were reviewed. In group 1 there were 222 missiles retained in the hearts of 201 patients. The retained missiles were 45 bullets in 45 patients, 109 shrapnel in 99 patients, 18 pellets in 7 patients, and 50 unidentified missiles in 50 patients. Thirteen of the missiles were completely embedded intramyocardial missiles, 122 were partially intramyocardial, 47 were free in a cardiac chamber, and 40 were intrapericardial. One hundred four of the missiles were removed and 118 were left in place. In group 2 there were 24 missiles, 18 bullets, 1 bullet fragment, and 5 pellets retained in the hearts of 24 patients. Ten missiles were removed, no attempt was made in 13 patients, and an unsuccessful attempt was made to remove one other. From group 1 patients, 6 died, 2 with intracavitary missiles, 3 patients with partially intramyocardial, and 1 patient with an intrapericardial missile, all of whom had either unsuccessful or no attempt to remove the missile. Twenty-seven patients had symptoms, all of whom, except two, had either unsuccessful or no attempt to remove the missile. All group 2 patients did well and had been free of symptoms related to the missiles. This review suggests that the management of missiles in the heart should be individualized according to the patient's clinical course, the site, shape, and size of the missile, and that in selected patients missiles in the heart are tolerated well.

The effect of brain tomography findings on mortality in sniper shot head injuries.

PubMed

Can, Çağdaş; Bolatkale, M; Sarıhan, A; Savran, Y; Acara, A Ç; Bulut, M

2017-06-01

Penetrating gunshot head injuries have a poor prognosis and require prompt care. Brain CT is a routine component of the standard evaluation of head wounds and suspected brain injury. We aimed to investigate the effect of brain CT findings on mortality in gunshot head injury patients who were admitted to our emergency department (ED) from the Syrian Civil War. The study group comprised patients who were admitted to the ED with gunshot brain injury. Patients' GCS scores, prehospital intubations and brain CT findings were examined. 104 patients were included (92% male, mean age 25 years). Pneumocephalus, midline shift, penetrating head injury, patients with GCS scores ≤6 and patients who had to be intubated in the prehospital period were associated with higher mortality (p<0.05). The results of this study demonstrated that pneumocephalus, midline shift, a penetrating head injury, GCS scores ≤6 and prehospital intubation are associated with high mortality, whereas patients with temporal bone fracture, perforating or single cerebral lobe head injury had a higher survival rates. The temporal bone has a relatively thin and smooth shape compared with the other skull bones so a bullet is less fragmented when it has penetrated the temporal bone, which could be a reason for the reduced cavitation effect. In perforating head injury, the bullet makes a second hole and so will have deposited less energy than a retained bullet with a consequent reduction in intracranial injury and mortality. Further studies are required to reach definitive conclusions. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Low-cost sustainable wall construction system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vohra, A.; Rosenfeld, A.H.

1998-07-01

Houses with no wall cavities, such as those made of adobe, stone, brick, or block, have poor thermal properties but are rarely insulated because of the cost and difficulty of providing wall insulation. A simple, low-cost technique using loose-fill indigenous materials has been demonstrated for the construction of highly insulated walls or the retrofit of existing walls in such buildings. Locally available pumice, in sandbags stacked along the exterior wall of an adobe house in New Mexico, added a thermal resistance (R) of 16 F{sm{underscore}bullet}ft{sup 2}{sm{underscore}bullet}h/Btu (2.8 m{sup 2}{sm{underscore}bullet}K/W). The total cost of the sandbag insulation wall retrofit wasmore » $3.76 per square foot ($$40.50/m{sup 2}). Computer simulations of the adobe house using DOE 2.1E show savings of $$275 per year, corresponding to 50% reduction in heating energy consumption. The savings-to-investment ratio ranges from 1.1 to 3.2, so the cost of conserved energy is lower than the price of propane, natural gas and electric heat, making the system cost-effective. Prototype stand-alone walls were also constructed using fly ash and sawdust blown into continuous polypropylene tubing, which was folded between corner posts as it was filled to form the shape of the wall. Other materials could also be used. The inexpensive technique solves the problem of insulating solid-wall hours and constructing new houses without specialized equipment and skills, thereby saving energy, reducing greenhouse gas emissions, and improving comfort for people in many countries. The US Department of Energy (DOE) has filed patent applications on this technology, which is part of a DOE initiative on sustainable building envelope materials and systems.« less

Thermal Stability of a 4 Meter Primary Reflector for the Scanning Microwave Limb Sounder

NASA Technical Reports Server (NTRS)

Cofield, Richard; Kasl, Eldon P.

2010-01-01

We describe the fabrication and thermal-stability analysis and test of a composite demonstration model of the Scanning Microwave Limb Sounder (SMLS) primary reflector, having full 4m height and 1/3 the width planned for flight. SMLS is a space-borne heterodyne radiometer which will measure pressure, temperature and atmospheric constituents from thermal emission between 180 and 660 GHz. Current MLS instruments in low Earth orbit scan pencil-beam antennas (sized to resolve about one scale height) vertically over the atmospheric limb. SMLS, planned for the Global Atmospheric Composition Mission of the NRC Decadal Survey, adds azimuthal scanning for better horizontal and temporal resolution and coverage than typical orbit spacing provides. SMLS combines the wide scan range of the parabolic torus with unblocked offset Cassegrain optics. The resulting system is diffraction-limited in the vertical plane but highly astigmatic in the horizontal, having a beam aspect ratio [tilde operator]1:20. Symmetry about the nadir axis ensures that beam shape is nearly invariant over +/-65(white bullet) azimuth. The a feeds a low-noise SIS receiver whose FOV is swept over the reflector system by a small scanning mirror. Using finiteelement models of antenna reflectors and structure, we evaluate thermal deformations and the resulting optical performance for 4 orbital environments and isothermal soak. We compare deformations with photogrammetric measurements made during wide-range (ambient+[-97,+75](white bullet) C) thermal soak tests of the primary in a chamber. This range exceeds predicted orbital soak ranges by large factors, implying in-orbit thermal stability of 0.21(mu)m rms/(white bullet)C, which meets SMLS requirements.

Lead intoxication in dogs: risk assessment of feeding dogs trimmings of lead-shot game.

PubMed

Høgåsen, Helga R; Ørnsrud, Robin; Knutsen, Helle K; Bernhoft, Aksel

2016-07-25

Expanding lead-based bullets, commonly used for hunting of big game, produce a scattering of lead particles in the carcass around the wound channel. Trimmings around this channel, which are sometimes fed to dogs, may contain lead particles. The aim of this study was to assess potential health effects of feeding dogs such trimmings. Lead ingestion most commonly causes gastrointestinal and neurological clinical signs, although renal, skeletal, haematological, cardiovascular and biochemical effects have also been reported. Experimental data indicate that a daily dose of around 1 mg lead as lead acetate/kg body weight for ten days may be considered as a Lowest Observed Effect Level in dogs. Acute toxicity documentation from the Centers for Disease Control and Prevention indicates 300 mg/kg body weight as the lowest dose of lead acetate causing death in dogs after oral ingestion. Our assessment suggests that dogs fed trimmings of lead-shot game may be affected by the amounts of lead present, and that even deadly exposure could occasionally occur. The intestinal absorption of lead from bullets was assumed to be 10-80 % of that of lead acetate, reflecting both the variability in particle size and uncertainty about the bioavailability of metallic lead in dogs. Despite data gaps, this study indicates that feeding dogs trimmings of lead-shot game may represent a risk of lead intoxication. More research is needed to assess the exact consequences, if lead-based bullets are still to be used. Meanwhile, we recommend that trimmings close to the wound channel should be made inaccessible to dogs, as well as to other domestic or wild animals.

TURBULENT COSMIC-RAY REACCELERATION AT RADIO RELICS AND HALOS IN CLUSTERS OF GALAXIES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fujita, Yutaka; Takizawa, Motokazu; Yamazaki, Ryo

Radio relics are synchrotron emission found on the periphery of galaxy clusters. From the position and the morphology, it is often believed that the relics are generated by cosmic-ray (CR) electrons accelerated at shocks through a diffusive shock acceleration (DSA) mechanism. However, some radio relics have harder spectra than the prediction of the standard DSA model. One example is observed in the cluster 1RXS J0603.3+4214, which is often called the “Toothbrush Cluster.” Interestingly, the position of the relic is shifted from that of a possible shock. In this study, we show that these discrepancies in the spectrum and the positionmore » can be solved if turbulent (re)acceleration is very effective behind the shock. This means that for some relics turbulent reacceleration may be the main mechanism to produce high-energy electrons, contrary to the common belief that it is the DSA. Moreover, we show that for efficient reacceleration, the effective mean free path of the electrons has to be much smaller than their Coulomb mean free path. We also study the merging cluster 1E 0657−56, or the “Bullet Cluster,” in which a radio relic has not been found at the position of the prominent shock ahead of the bullet. We indicate that a possible relic at the shock is obscured by the observed large radio halo that is generated by strong turbulence behind the shock. We propose a simple explanation of the morphological differences of radio emission among the Toothbrush, the Bullet, and the Sausage (CIZA J2242.8+5301) Clusters.« less

Performance of primary repair on colon injuries sustained from low-versus high-energy projectiles

PubMed Central

Lazovic, Ranko; Radojevic, Nemanja; Curovic, Ivana

2017-01-01

Among various reasons, colon injuries may be caused by low- or high-energy firearm bullets, with the latter producing a temporary cavitation phenomenon. The available treatment options include primary repair and two-stage management, but recent studies have shown that primary repair can be widely used with a high success rate. This paper investigates the differences in performance of primary repair on these two types of colon injuries. Two groups of patients who sustained colon injuries due to single gunshot wounds, were retrospectively categorized based on the type of bullet. Primary colon repair was performed in all patients selected based on the inclusion and exclusion criteria (Stone and Fabian's criteria). An almost absolute homogeneity was attained among the groups in terms of age, latent time before surgery, and four trauma indexes. Only one patient from the low-energy firearm projectile group (4%) developed a postsurgical complication versus nine patients (25.8%) from the high-energy group, showing statistically significant difference (p = 0.03). These nine patients experienced the following postsurgical complications: pneumonia, abscess, fistula, suture leakage, and one multiorgan failure with sepsis. Previous studies concluded that one-stage primary repair is the best treatment option for colon injuries. However, terminal ballistics testing determined the projectile's path through the body and revealed that low-energy projectiles caused considerably lesser damage than their high-energy counterparts. Primary colon repair must be performed definitely for low-energy short firearm injuries but very carefully for high-energy injuries. Given these findings, we suggest that the treatment option should be determined based not only on the bullet type alone but also on other clinical findings. PMID:26874437

History of Science and Conceptual Change: The Formation of Shadows by Extended Light Sources

ERIC Educational Resources Information Center

Dedes, Christos; Ravanis, Konstantinos

2009-01-01

This study investigates the effectiveness of a teaching conflict procedure whose purpose was the transformation of the representations of 12-16-year-old pupils in Greece concerning light emission and shadow formation by extended light sources. The changes observed during the children's effort to destabilize and reorganise their representations…

Uncovering the formation and selection of benzylmalonyl-CoA from the biosynthesis of splenocin and enterocin reveals a versatile way to introduce amino acids into polyketide carbon scaffolds.

PubMed

Chang, Chenchen; Huang, Rong; Yan, Yan; Ma, Hongmin; Dai, Zheng; Zhang, Benying; Deng, Zixin; Liu, Wen; Qu, Xudong

2015-04-01

Selective modification of carbon scaffolds via biosynthetic engineering is important for polyketide structural diversification. Yet, this scope is currently restricted to simple aliphatic groups due to (1) limited variety of CoA-linked extender units, which lack aromatic structures and chemical reactivity, and (2) narrow acyltransferase (AT) specificity, which is limited to aliphatic CoA-linked extender units. In this report, we uncovered and characterized the first aromatic CoA-linked extender unit benzylmalonyl-CoA from the biosynthetic pathways of splenocin and enterocin in Streptomyces sp. CNQ431. Its synthesis employs a deamination/reductive carboxylation strategy to convert phenylalanine into benzylmalonyl-CoA, providing a link between amino acid and CoA-linked extender unit synthesis. By characterization of its selection, we further validated that AT domains of splenocin, and antimycin polyketide synthases are able to select this extender unit to introduce the phenyl group into their dilactone scaffolds. The biosynthetic machinery involved in the formation of this extender unit is highly versatile and can be potentially tailored for tyrosine, histidine and aspartic acid. The disclosed aromatic extender unit, amino acid-oriented synthetic pathway, and aromatic-selective AT domains provides a systematic breakthrough toward current knowledge of polyketide extender unit formation and selection, and also opens a route for further engineering of polyketide carbon scaffolds using amino acids.

The attractiveness of materials in advanced nuclear fuel cycles for various proliferation and theft scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bathke, Charles G; Wallace, Richard K; Ireland, John R

2009-01-01

This paper is an extension to earlier studies that examined the attractiveness of materials mixtures containing special nuclear materials (SNM) and alternate nuclear materials (ANM) associated with the PUREX, UREX, COEX, THOREX, and PYROX reprocessing schemes. This study extends the figure of merit (FOM) for evaluating attractiveness to cover a broad range of proliferant state and sub-national group capabilities. The primary conclusion of this study is that all fissile material needs to be rigorously safeguarded to detect diversion by a state and provided the highest levels of physical protection to prevent theft by sub-national groups; no 'silver bullet' has beenmore » found that will permit the relaxation of current international safeguards or national physical security protection levels. This series of studies has been performed at the request of the United States Department of Energy (DOE) and is based on the calculation of 'attractiveness levels' that are expressed in terms consistent with, but normally reserved for nuclear materials in DOE nuclear facilities. The expanded methodology and updated findings are presented. Additionally, how these attractiveness levels relate to proliferation resistance and physical security are discussed.« less

An ecological approach to problems of Dark Energy, Dark Matter, MOND and Neutrinos

NASA Astrophysics Data System (ADS)

Zhao, Hong Sheng

2008-11-01

Modern astronomical data on galaxy and cosmological scales have revealed powerfully the existence of certain dark sectors of fundamental physics, i.e., existence of particles and fields outside the standard models and inaccessible by current experiments. Various approaches are taken to modify/extend the standard models. Generic theories introduce multiple de-coupled fields A, B, C, each responsible for the effects of DM (cold supersymmetric particles), DE (Dark Energy) effect, and MG (Modified Gravity) effect respectively. Some theories use adopt vanilla combinations like AB, BC, or CA, and assume A, B, C belong to decoupled sectors of physics. MOND-like MG and Cold DM are often taken as antagnising frameworks, e.g. in the muddled debate around the Bullet Cluster. Here we argue that these ad hoc divisions of sectors miss important clues from the data. The data actually suggest that the physics of all dark sectors is likely linked together by a self-interacting oscillating field, which governs a chameleon-like dark fluid, appearing as DM, DE and MG in different settings. It is timely to consider an interdisciplinary approach across all semantic boundaries of dark sectors, treating the dark stress as one identity, hence accounts for several "coincidences" naturally.

Nanotube News

ERIC Educational Resources Information Center

Journal of College Science Teaching, 2005

2005-01-01

Smaller, faster computers, bullet-proof t-shirts, and itty-bitty robots--such are the promises of nanotechnology and the cylinder-shaped collection of carbon molecules known as nanotubes. But for these exciting ideas to become realities, scientists must understand how these miracle molecules perform under all sorts of conditions. This brief…

How to Start Intergenerational Programs in Communities.

ERIC Educational Resources Information Center

2002

This document is designed for use by community organizers in creating, developing and maintaining an intergenerational program. Starting with a brief overview of the Maryland Intergenerational Coalition, the document describes (in short, bulleted entries) the activities and accomplishments of various intergenerational programs in Maryland, such as…

National Centers for Environmental Prediction

Science.gov Websites

Statistics Observational Data Processing Data Assimilation Monsoon Desk Model Transition Seminars Seminar Documentation for operational and research users Operational Models All of the secondary bulleted items will be climate MOM4 HYCOM-Wavewatch Modeling Research Global and regional Institutionally supported components

A Bullet-Shaped Tray To Demonstrate the Particle Model of Matter.

ERIC Educational Resources Information Center

Douma, Sander

1999-01-01

Describes a model that (1) convincingly demonstrates a particle model of gas behavior, (2) can be used by students, (3) can be mass produced, and (4) illustrates other properties of matter such as simple crystal structures and states of matter. (WRM)

Experimental Investigation of the Plasma Bullet and Its Applications

DTIC Science & Technology

2012-08-01

W. Hynes, M. Laroussi, and S. L. Tolle, “Cold Plasma Technology: Bactericidal Effects on Geobacillus Stearothermophilus and Bacillus Cereus...Polymers on Plasma Sterilization and Decontamination (Vol. 9, No. 6, 2012). The PI was a member of the Scientific Organizing Committee of two major

NYSDOT Bridge Deck Task Force evaluation of bridge deck cracking on NYSDOT bridges

DOT National Transportation Integrated Search

2007-02-01

This paper presents a summary of knowledge gained by the NYSDOT Bridge Deck Task Force (BDTF). Although the paper contains recommendations to reduce the prevalence and severity of bridge deck cracking, it does not include a silver bullet soluti...

General Achievement Trends: Alabama

ERIC Educational Resources Information Center

Center on Education Policy, 2009

2009-01-01

This general achievement trends profile includes information that the Center on Education Policy (CEP) and the Human Resources Research Organization (HumRRO) obtained from states from fall 2008 through April 2009. Included herein are: (1) Bullet points summarizing key findings about achievement trends in that state at three performance…

Priority Setting in Government: Beyond the Magic Bullet.

ERIC Educational Resources Information Center

Bosin, Morris Robert

1992-01-01

Priority setting is examined from the perspective of planning practitioners operating in a major federal regulatory agency. Causes of ambivalence in setting priorities are considered, and ways to reduce ambivalence are suggested. Three models are proposed for setting priorities in the public sector. (SLD)

A new course and textbook on Physical Models of Living Systems, for science and engineering undergraduates

NASA Astrophysics Data System (ADS)

Nelson, Philip

2015-03-01

I'll describe an intermediate-level course on ``Physical Models of Living Systems.'' The only prerequisite is first-year university physics and calculus. The course is a response to rapidly growing interest among undergraduates in a broad range of science and engineering majors. Students acquire several research skills that are often not addressed in traditional courses: Basic modeling skills Probabilistic modeling skills Data analysis methods Computer programming using a general-purpose platform like MATLAB or Python Dynamical systems, particularly feedback control. These basic skills, which are relevant to nearly any field of science or engineering, are presented in the context of case studies from living systems, including: Virus dynamics Bacterial genetics and evolution of drug resistance Statistical inference Superresolution microscopy Synthetic biology Naturally evolved cellular circuits. Work supported by NSF Grants EF-0928048 and DMR-0832802.

Video camera system for locating bullet holes in targets at a ballistics tunnel

NASA Technical Reports Server (NTRS)

Burner, A. W.; Rummler, D. R.; Goad, W. K.

1990-01-01

A system consisting of a single charge coupled device (CCD) video camera, computer controlled video digitizer, and software to automate the measurement was developed to measure the location of bullet holes in targets at the International Shooters Development Fund (ISDF)/NASA Ballistics Tunnel. The camera/digitizer system is a crucial component of a highly instrumented indoor 50 meter rifle range which is being constructed to support development of wind resistant, ultra match ammunition. The system was designed to take data rapidly (10 sec between shoots) and automatically with little operator intervention. The system description, measurement concept, and procedure are presented along with laboratory tests of repeatability and bias error. The long term (1 hour) repeatability of the system was found to be 4 microns (one standard deviation) at the target and the bias error was found to be less than 50 microns. An analysis of potential errors and a technique for calibration of the system are presented.

Suspected lead poisoning in two captive cheetahs (Acinonyx jubatus jubatus) in South Africa, in 2008 and 2013.

PubMed

North, Michelle A; Lane, Emily P; Marnewick, Kelly; Caldwell, Peter; Carlisle, Glen; Hoffman, Louw C

2015-08-13

Whilst lead poisoning in raptors, scavenging birds and waterfowl is well studied and common knowledge, there is surprisingly little literature detailing the risk to mammalian scavengers and captive carnivores fed hunted meat. This case report describes the death of two captive cheetahs (Acinonyx jubatus jubatus) following acute onset of nervous symptoms. Clinical signs included hyper-excitability, seizures, arched back, tail held abnormally high and hyper-salivation. Necropsy findings included bullets or a bullet in their stomachs. Kidney and liver lead levels from one cheetah (15.6 ppm and 17 ppm respectively) were consistent with a diagnosis of lead poisoning; liver from the second cheetah was not available for testing. Both animals were routinely fed hunted antelope or game birds. This is the first report of oral lead poisoning in captive large carnivores, although these are unlikely to be the first cases. Without awareness of the risks of feeding hunted game, lead exposure will continue to be an underdiagnosed reality in the rehabilitation of endangered carnivores.

Bone-patch type secondary projectiles: A report on two shots fired at point-blank range using hollow point bullets.

PubMed

Malbranque, S; Jousset, N; Nedelcu, C; Rougé-Maillart, C

2014-12-01

The number of head wounds due to firearms remains low in France because these cases are primarily linked to suicide (or attempted suicide) and, to a lesser extent, to attacks or hunting accidents [1]. Characterized by the impact of a projectile, which in most cases is made of metal, at high levels of kinetic energy, such acts generally result in severe trans-cerebral lesions with significant levels of morbidity/mortality [2]. Seldom are cases reported in the literature that give a detailed study of intracranial foreign bodies made of bone in such situations [3]. Here we report on the case of two suicides resulting from a transcranial gunshot wounds caused by weapons and ammunition issued by the French police force. Each case helped distinguish a characteristic bone fragment, in the form of a "patch", equivalent in size to the caliber of the bullet. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Injuries of the head from backface deformation of ballistic protective helmets under ballistic impact.

PubMed

Rafaels, Karin A; Cutcliffe, Hattie C; Salzar, Robert S; Davis, Martin; Boggess, Brian; Bush, Bryan; Harris, Robert; Rountree, Mark Steve; Sanderson, Ellory; Campman, Steven; Koch, Spencer; Dale Bass, Cameron R

2015-01-01

Modern ballistic helmets defeat penetrating bullets by energy transfer from the projectile to the helmet, producing helmet deformation. This deformation may cause severe injuries without completely perforating the helmet, termed "behind armor blunt trauma" (BABT). As helmets become lighter, the likelihood of larger helmet backface deformation under ballistic impact increases. To characterize the potential for BABT, seven postmortem human head/neck specimens wearing a ballistic protective helmet were exposed to nonperforating impact, using a 9 mm, full metal jacket, 124 grain bullet with velocities of 400-460 m/s. An increasing trend of injury severity was observed, ranging from simple linear fractures to combinations of linear and depressed fractures. Overall, the ability to identify skull fractures resulting from BABT can be used in forensic investigations. Our results demonstrate a high risk of skull fracture due to BABT and necessitate the prevention of BABT as a design factor in future generations of protective gear. © 2014 American Academy of Forensic Sciences.

Identification of gunshot residues in fabric targets using sector field inductively coupled plasma mass spectrometry technique and ternary graphs.

PubMed

Freitas, João Carlos D; Sarkis, Jorge E Souza; Negrini Neto, Osvaldo; Viebig, Sônia Bocamino

2012-03-01

During criminal investigations involving firearms, the detection of gunshot residues (GSRs) is one of the most important evidences. In the present study, a new method to identify trace evidences of GSRs, deposited around the bullet entrance hole, in different types of fabrics used as targets, is described. The experiments were carried out using a 0.38-inch caliber revolver, and 9-mm and 0.40-inch caliber pistols. Testimonies of 2.25 cm(2) of the fabrics were cut around the bullet entrance and digested with 10% nitric acid. Antimony, barium, and lead were analyzed in the remaining solution using a sector field inductively coupled plasma mass spectrometer. The concentrations of the elements were detected at levels up to few microgram per square centimeter. The use of ternary graphics allowed us to identify specific patterns of distribution for blank samples and the clear distinction between the revolver and pistols used. © 2011 American Academy of Forensic Sciences.

The role of maxillofacial radiologists in gunshot injuries: a hypothesized missile trajectory in two case reports

PubMed Central

Sansare, K; Khanna, V; Karjodkar, F

2011-01-01

Gunshot injuries are an emerging form of trauma that oral radiologists increasingly have to deal with. There are two main types of gunshot injuries: high-velocity and low-velocity bullet injuries. The outcome of high-velocity gunshot injury is usually fatal; however, a non-fatal low-velocity injury to the maxillofacial region is more likely to be encountered by the oral and maxillofacial radiologist. It is therefore important to up-to-date knowledge of ballistic science and its implications in the field of maxillofacial radiology. The ability of oral and maxillofacial radiologists to predict the missile trajectory will aid the assessment and localization of the damage caused by the bullet and its splinters. Predicting the missile trajectory may also be of help to law enforcement agencies and forensic scientists in determining the type of firearm used and direction of fire. This article, which examines two cases, attempts to highlight to the oral radiologist this emerging form of trauma and its implications. PMID:21159916

DOE Office of Scientific and Technical Information (OSTI.GOV)

van der Eide, Edwin F.; Yang, Ping; Walter, Eric D.

Unlike the very labile, unobservable radical cations [{l_brace}CpM(CO){sub 3}{r_brace}{sub 2}]{sup {sm_bullet}+} (M = W, Mo), derivatives [{l_brace}CpM(CO){sub 2}(PMe{sub 3}){r_brace}{sub 2}]{sup {sm_bullet}+} are stable enough to be isolated and characterized. Experimental and theoretical studies show that the shortened M-M bonds are of order 1 1/2, and that they are not supported by bridging ligands. The unpaired electron is fully delocalized, with a spin density of ca. 45% on each metal atom. We thank the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Biosciences and Geosciences for support of this work. Pacific Northwestmore » National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. The EPR and computational studies were performed using EMSL, a national scientific user facility sponsored by the DOE's Office of Biological and Environmental Research and located at PNNL. We thank Dr. Charles Windisch for access to his UV-Vis-NIR spectrometer.« less

Characteristics and Frequency of Chipping Effects in Near-Contact Gunshot Wounds.

PubMed

Amadasi, Alberto; Mazzarelli, Debora; Merli, Daniele; Brandone, Alberto; Cattaneo, Cristina

2017-05-01

The presence of "chipping" or "flaking" around the edges of gunshot entry wounds has been described among the characteristics of gunshot wounds in bone. In this study, the real frequency of such a peculiar feature was investigated. The presence of "chipping" was assessed on 22 gunshot wounds fired at a near-contact range on bovine ribs with 9-mm bullets. As controls, five samples were shot with a 3 cm range, and five from 40 cm. In 77% of cases shot at near-contact range, a detachment of small fragments of the upper layers of bone was detected, mainly with a circumferential disposition, whereas this feature was lacking in control samples. The study demonstrated the frequency of "chipping" and that it may probably be due to a combined ballistic effect of impact of the bullet itself and expansion of gases. It may be thus considered indicative of close-range shots. © 2016 American Academy of Forensic Sciences.

The transfer of atmospheric-pressure ionization waves via a metal wire

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xia, Yang; Liu, Dongping, E-mail: Dongping.liu@dlnu.edu.cn; School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024

2016-01-15

Our study has shown that the atmospheric-pressure He ionization waves (IWs) may be transferred from one dielectric tube (tube 1) to the other one (tube 2) via a floating metal wire. The propagation of IWs along the two tubes is not affected by the diameter of a floating metal wire, however, their propagation is strongly dependent on the length of a floating metal wire. The propagation of one IW along the tube 1 may result in the second IW propagating reversely inside the tube in vicinity of a floating metal wire, which keeps from their further propagation through the tubemore » 1. After they merge together as one conduction channel inside the tube 1, the transferred plasma bullet starts to propagate along the tube 2. The propagation of transferred plasma bullets along the tube 2 is mainly determined by the capacitance and inductance effects, and their velocity and density can be controlled by the length of a floating metal wire.« less

Mitochondrial genome of the bullet tuna Auxis rochei from Indo-West Pacific collection provides novel genetic information about two subspecies.

PubMed

Li, Mingming; Guo, Liang; Zhang, Heng; Yang, Sen; Chen, Xinghan; Lin, Haoran; Meng, Zining

2016-09-01

Previously morphological studies supported the division of the bullet tuna into the two subspecies, Auxis rochei rochei and A. rochei eudorax. As a cosmopolitan species, A. rochei rochei ranges in the Indo-West Pacific and Atlantic oceans, while A. rochei eudorax inhabits in eastern Pacific region. Here, we used the HiSeq next-generation sequencing technique to determine the mitochondrial genome (mitogenome) of A. rochei from Indo-West Pacific collection, and then compared our data with mitogenomic sequences of the Atlantic and eastern Pacific retrieved from NCBI database. Results showed the mitogenome of A. rochei from three geographic collections shared the same genes and gene order, similar to typical teleosts. Also, we examined a low level of nucleotide diversity among these mitogenomic sequences. Interestingly, nucleotide diversity of intra-subspecies (Atlantic versus Indo-West) was higher than that of inter-subspecies (Atlantic versus eastern Pacific, Indo-West versus eastern Pacific).

Influence of the power supply parameters on the projectile energy in the permanent magnet electrodynamic accelerator

NASA Astrophysics Data System (ADS)

Waindok, Andrzej; Piekielny, Paweł

2017-10-01

The main objective of the research is to investigate, how the power supply parameters influence the kinetic energy of the movable element, called commonly a projectile or bullet. A calculation and measurement results of transient characteristics for an electrodynamic accelerator with permanent magnet support were presented in the paper. The calculations were made with using field-circuit model, which includes the parameters of the power supply, mass of the bullet and friction phenomenon. Characteristics of energy and muzzle velocity verso supply voltage (50 V to 350 V) and capacitance value (60 mF to 340.5 mF) were determined, as well. A measurement verification of selected points of calculation characteristics were carried out for investigated values of muzzle velocity. A good conformity between calculation and measurement results was obtained. Concluding, presented characteristics of the muzzle velocity and energy of the projectile vs. power supply parameters indicate, that accelerators could be used for fatigue testing of materials.

Hydroball string sensing system

DOEpatents

Hurwitz, Michael J.; Ekeroth, Douglas E.; Squarer, David

1991-01-01

A hydroball string sensing system for a nuclear reactor that includes stainless tubes positioned to guide hydroball strings into and out of the nuclear reactor core. A sensor such as an ultrasonic transducer transmitter and receiver is positioned outside of the nuclear reactor core and adjacent to the tube. The presence of an object such a bullet member positioned at an end a hydroball string, or any one of the hydroballs interrupts the transmission of ultrasound from the transmitter to the receiver. Alternatively, if the bullet member and hydroballs include a ferritic material, either a Hall effect sensor or other magnetic field sensors such as a magnetic field rate of change sensor can be used to detect the location and position of a hydroball string. Placing two sensors along the tube with a known distance between the sensors enables the velocity of a hydroball string to be determined. This determined velocity can be used to control the flow rate of a fluid within the tube so as to control the velocity of the hydroball string.

The role of maxillofacial radiologists in gunshot injuries: a hypothesized missile trajectory in two case reports.

PubMed

Sansare, K; Khanna, V; Karjodkar, F

2011-01-01

Gunshot injuries are an emerging form of trauma that oral radiologists increasingly have to deal with. There are two main types of gunshot injuries: high-velocity and low-velocity bullet injuries. The outcome of high-velocity gunshot injury is usually fatal; however, a non-fatal low-velocity injury to the maxillofacial region is more likely to be encountered by the oral and maxillofacial radiologist. It is therefore important to up-to-date knowledge of ballistic science and its implications in the field of maxillofacial radiology. The ability of oral and maxillofacial radiologists to predict the missile trajectory will aid the assessment and localization of the damage caused by the bullet and its splinters. Predicting the missile trajectory may also be of help to law enforcement agencies and forensic scientists in determining the type of firearm used and direction of fire. This article, which examines two cases, attempts to highlight to the oral radiologist this emerging form of trauma and its implications.

Impact analysis of side door of a car and bullet proof vest with material ‘SAM2X5-630’ using finite element analysis

NASA Astrophysics Data System (ADS)

Dhode, Trushant; Patil, Girish; Rajkumar, E.

2017-11-01

The components which are bound to impact are subjected to deformation even though it may be for a small scale. The efforts are always on for finding the best material to take impact that has no failure or moreover, less plastic deformation. A newly found material which is glass matrix steel named as ‘SAM2X5-630’ has astounding high elastic limit of 12.5GPa. Thus it can take powerful impact & regain its original shape avoiding the deformation of component under impact. The paper is focused on performing the Finite element analysis to assess the behaviour of ‘SAM2X5-630’ steel under impact loading of side door of car as well as impact of bullet on bulletproof jacket on which the material is assigned. The displacement or deformation occurred during impact is found to be lesser than known materials like Kevlar in bulletproof vest and Aluminium alloy in car door.

From an old remedy to a magic bullet: molecular mechanisms underlying the therapeutic effects of arsenic in fighting leukemia

PubMed Central

Zhou, Guang-Biao; Zhang, Xiao-Wei; Mao, Jian-Hua; de Thé, Hugues

2011-01-01

Arsenic had been used in treating malignancies from the 18th to mid-20th century. In the past 3 decades, arsenic was revived and shown to be able to induce complete remission and to achieve, when combined with all-trans retinoic acid and chemotherapy, a 5-year overall survival of 90% in patients with acute promyelocytic leukemia driven by the t(15;17) translocation-generated promyelocytic leukemia–retinoic acid receptor α (PML-RARα) fusion. Molecularly, arsenic binds thiol residues and induces the formation of reactive oxygen species, thus affecting numerous signaling pathways. Interestingly, arsenic directly binds the C3HC4 zinc finger motif in the RBCC domain of PML and PML-RARα, induces their homodimerization and multimerization, and enhances their interaction with the SUMO E2 conjugase Ubc9, facilitating subsequent sumoylation/ubiquitination and proteasomal degradation. Arsenic-caused intermolecular disulfide formation in PML also contributes to PML-multimerization. All-trans retinoic acid, which targets PML-RARα for degradation through its RARα moiety, synergizes with arsenic in eliminating leukemia-initiating cells. Arsenic perturbs a number of proteins involved in other hematologic malignancies, including chronic myeloid leukemia and adult T-cell leukemia/lymphoma, whereby it may bring new therapeutic benefits. The successful revival of arsenic in acute promyelocytic leukemia, together with modern mechanistic studies, has thus allowed a new paradigm to emerge in translational medicine. PMID:21422471

Induction heaters used to heat subsurface formations

DOEpatents

Nguyen, Scott Vinh [Houston, TX; Bass, Ronald M [Houston, TX

2012-04-24

A heating system for a subsurface formation includes an elongated electrical conductor located in the subsurface formation. The electrical conductor extends between at least a first electrical contact and a second electrical contact. A ferromagnetic conductor at least partially surrounds and at least partially extends lengthwise around the electrical conductor. The electrical conductor, when energized with time-varying electrical current, induces sufficient electrical current flow in the ferromagnetic conductor such that the ferromagnetic conductor resistively heats to a temperature of at least about 300.degree. C.

An Alternative Representation of a Simulated Human Body

DTIC Science & Technology

2013-11-01

Casualty Assessment ( ORCA )3 uses this model to determine injury from insults to the body from fragments and bullets. An alternative representation was...Based Casualty Assessment: ORCA Analyst’s Manual; U.S. Army Research Laboratory: Aberdeen Proving Ground, MD, August 2005; draft. 4 U.S. Army Natick

Tribology. LC Science Tracer Bullet.

ERIC Educational Resources Information Center

Havas, George D., Comp.

Tribology is the science and technology of interacting surfaces in relative motion. It incorporates a number of scientific fields, including friction, wear, lubrication, materials science, and various branches of surface physics and surface chemistry. Tribology forms a vital part of engineering science. The interacting surfaces may be on machinery…

Dodging Bullets: The Threat of Space Debris to U.S. National Security

DTIC Science & Technology

2010-06-11

compliance with any additional national level anti-money laundering and counter-financing of terrorism ( AML / CFT ) legislation. Three different member...jurisdictions volunteer to provide an AML / CFT specialist in one of the three on-site evaluation categories: law enforcement, regulatory and legal.25...

Japanese Inspired Customer Service

ERIC Educational Resources Information Center

Lonabocker, Louise

2004-01-01

The author of this commentary was looking forward to visiting Japan, a new culture. With excitement she anticipated experiencing hot springs, monumental shrines, breathtaking gardens, delicious sashimi and soba, and the speedy bullet trains--all so different from life in Boston. She was not disappointed but was surprised, pleasantly, by constant…