Composite Overwrapped Pressure Vessels: Database Extension Task 3.0 and Impact Damage Effects Control Task 8.0

NASA Technical Reports Server (NTRS)

Beeson, Harold D.; Davis, Dennis D.; Ross, William L., Sr.; Tapphorn, Ralph M.

2002-01-01

This document represents efforts accomplished at the NASA Johnson Space Center White Sands Test Facility (WSTF) in support of the Enhanced Technology for Composite Overwrapped Pressure Vessels (COPV) Program, a joint research and technology effort among the U.S. Air Force, NASA, and the Aerospace Corporation. WSTF performed testing for several facets of the program. Testing that contributed to the Task 3.0 COPV database extension objective included baseline structural strength, failure mode and safe-life, impact damage tolerance, sustained load/impact effect, and materials compatibility. WSTF was also responsible for establishing impact protection and control requirements under Task 8.0 of the program. This included developing a methodology for establishing an impact control plan. Seven test reports detail the work done at WSTF. As such, this document contributes to the database of information regarding COPV behavior that will ensure performance benefits and safety are maintained throughout vessel service life.

The development of test beds to support the definition and evolution of the Space Station Freedom power system

NASA Technical Reports Server (NTRS)

Soeder, James F.; Frye, Robert J.; Phillips, Rudy L.

1991-01-01

Since the beginning of the Space Station Freedom Program (SSFP), the NASA Lewis Research Center (LeRC) and the Rocketdyne Division of Rockwell International have had extensive efforts underway to develop testbeds to support the definition of the detailed electrical power system design. Because of the extensive redirections that have taken place in the Space Station Freedom Program in the past several years, the test bed effort was forced to accommodate a large number of changes. A short history of these program changes and their impact on the LeRC test beds is presented to understand how the current test bed configuration has evolved. The current test objectives and the development approach for the current DC test bed are discussed. A description of the test bed configuration, along with its power and controller hardware and its software components, is presented. Next, the uses of the test bed during the mature design and verification phase of SSFP are examined. Finally, the uses of the test bed in the operation and evolution of the SSF are addressed.

Power Extension Package (PEP) system definition extension, orbital service module systems analysis study. Volume 12: PEP data item descriptions

NASA Technical Reports Server (NTRS)

1979-01-01

Contractor information requirements necessary to support the power extension package project of the space shuttle program are specified for the following categories of data: project management; configuration management; systems engineering and test; manufacturing; reliability, quality assurance and safety; logistics; training; and operations.

OTSEGO COUNTY EXPERIMENTAL PROGRAM FOR TESTING METHODS OF FORMING FARM MANAGEMENT STUDY GROUPS, A PROGRESS REPORT. EXTENSION STUDY, NUMBER 8.

ERIC Educational Resources Information Center

LONGEST, JAMES W.; GENGENBACK, WILLIAM H.

THE MOST FREQUENT METHOD OF GROUP FORMATION FOR INTENSIVE FARM MANAGEMENT PROGRAMS IN NEW YORK STATE HAS BEEN TO COMBINE ALL INTERESTED FARMERS IN LARGE GROUPS AT THE COUNTY EXTENSION HEADQUARTERS. THIS EXPERIMENT WAS SET UP TO STUDY THE EFFECTIVENESS OF TWO METHODS OF FORMING SMALL GROUPS--BY SOCIOMETRIC CHOICE OR SIMILAR CHARACTERISTICS. ALL…

UIUC concrete tie and fastener field testing at TTC.

DOT National Transportation Integrated Search

2014-07-01

In July 2012, the University of Illinois at Urbana-Champaign (UIUC) began an extensive : experimental program at the Transportation : Technology Center (TTC) in Pueblo, CO. The : field experimentation program was part of a : larger research program f...

Use of coal fly ash and other waste products in soil stabilization and road construction including non-destructive testing of roadways.

DOT National Transportation Integrated Search

2012-06-01

An extensive laboratory testing program was performed on subgrade soils stabilized using fly ash and : lime kiln dust. The laboratory program included measurements of: compaction curves, small strain elastic moduli, : resilient modulus (Mr), Briaud C...

Use of coal fly ash and other waste products in soil stabilization and road construction-including non-destructive testing of roadways.

DOT National Transportation Integrated Search

2012-02-01

An extensive laboratory testing program was performed on subgrade soils stabilized using fly ash and lime kiln dust. The laboratory : program included measurements of: compaction curves, small strain elastic moduli, resilient modulus (Mr), Briaud Com...

Control research in the NASA high-alpha technology program

NASA Technical Reports Server (NTRS)

Gilbert, William P.; Nguyen, Luat T.; Gera, Joseph

1990-01-01

NASA is conducting a focused technology program, known as the High-Angle-of-Attack Technology Program, to accelerate the development of flight-validated technology applicable to the design of fighters with superior stall and post-stall characteristics and agility. A carefully integrated effort is underway combining wind tunnel testing, analytical predictions, piloted simulation, and full-scale flight research. A modified F-18 aircraft has been extensively instrumented for use as the NASA High-Angle-of-Attack Research Vehicle used for flight verification of new methods and concepts. This program stresses the importance of providing improved aircraft control capabilities both by powered control (such as thrust-vectoring) and by innovative aerodynamic control concepts. The program is accomplishing extensive coordinated ground and flight testing to assess and improve available experimental and analytical methods and to develop new concepts for enhanced aerodynamics and for effective control, guidance, and cockpit displays essential for effective pilot utilization of the increased agility provided.

Outcomes of Stay Strong, Stay Healthy in community settings.

PubMed

Ball, Stephen; Gammon, Robin; Kelly, Patricia J; Cheng, An-Lin; Chertoff, Keyna; Kaume, Lydia; Abreu, Eduardo L; Brotto, Marco

2013-12-01

Loss of muscle strength, flexibility, and balance are strong predictors of falls in the elderly. The goal of this research was to investigate the effectiveness of a 10-week, strength-based exercise program delivered by Extension professionals. Matched pair t tests were used to compare differences in five measures of fitness collected from 808 participants (mean age = 65.4 years) at the start and finish of the exercise program. Following programming, participants significantly improved strength, flexibility, and balance. Results indicate that an evidence-based program can be translated into a community Extension program that is able to improve the fitness level of seniors.

Innovations in Continuing Education. 1979 Award-Winning New Programs. NUEA-ACT Series on Continuing Education. No. 5.

ERIC Educational Resources Information Center

National Univ. Extension Association, Washington, DC.

Seven 1979 innovative programs in continuing education are described which won awards from the American College Testing Program and the National University Extension Association. Awards were granted according to programs' transferability, innovativeness, workability, and impact in one of four categories: instructional programs, student services…

Better Crunching: Recommendations for Multivariate Data Analysis Approaches for Program Impact Evaluations

ERIC Educational Resources Information Center

Braverman, Marc T.

2016-01-01

Extension program evaluations often present opportunities to analyze data in multiple ways. This article suggests that program evaluations can involve more sophisticated data analysis approaches than are often used. On the basis of a hypothetical program scenario and corresponding data set, two approaches to testing for evidence of program impact…

Extensive Green Roof Research Program at Colorado State University

EPA Science Inventory

In the high elevation, semi-arid climate of Colorado, green roofs have not been scientifically tested. This research examined alternative plant species, media blends, and plant interactions on an existing modular extensive green roof in Denver, Colorado. Six plant species were ev...

CECE: Expanding the Envelope of Deep Throttling Technology in Liquid Oxygen/Liquid Hydrogen Rocket Engines for NASA Exploration Missions

NASA Technical Reports Server (NTRS)

Giuliano, Victor J.; Leonard, Timothy G.; Lyda, Randy T.; Kim, Tony S.

2010-01-01

As one of the first technology development programs awarded by NASA under the Vision for Space Exploration, the Pratt & Whitney Rocketdyne (PWR) Deep Throttling, Common Extensible Cryogenic Engine (CECE) program was selected by NASA in November 2004 to begin technology development and demonstration toward a deep throttling, cryogenic engine supporting ongoing trade studies for NASA s Lunar Lander descent stage. The CECE program leverages the maturity and previous investment of a flight-proven hydrogen/oxygen expander cycle engine, the PWR RL10, to develop and demonstrate an unprecedented combination of reliability, safety, durability, throttlability, and restart capabilities in high-energy, cryogenic, in-space propulsion. The testbed selected for the deep throttling demonstration phases of this program was a minimally modified RL10 engine, allowing for maximum current production engine commonality and extensibility with minimum program cost. Four series of demonstrator engine tests have been successfully completed between April 2006 and April 2010, accumulating 7,436 seconds of hot fire time over 47 separate tests. While the first two test series explored low power combustion (chug) and system instabilities, the third test series investigated and was ultimately successful in demonstrating several mitigating technologies for these instabilities and achieved a stable throttling ratio of 13:1. The fourth test series significantly expanded the engine s operability envelope by successfully demonstrating a closed-loop control system and extensive transient modeling to enable lower power engine starting, faster throttle ramp rates, and mission-specific ignition testing. The final hot fire test demonstrated a chug-free, minimum power level of 5.9%, corresponding to an overall 17.6:1 throttling ratio achieved. In total, these tests have provided an early technology demonstration of an enabling cryogenic propulsion concept with invaluable system-level technology data acquisition toward design and development risk mitigation for future lander descent main engines.

Technology advancement of the static feed water electrolysis process

NASA Technical Reports Server (NTRS)

Schubert, F. H.; Wynveen, R. A.

1977-01-01

A program to advance the technology of oxygen- and hydrogen-generating subsystems based on water electrolysis was studied. Major emphasis was placed on static feed water electrolysis, a concept characterized by low power consumption and high intrinsic reliability. The static feed based oxygen generation subsystem consists basically of three subassemblies: (1) a combined water electrolysis and product gas dehumidifier module; (2) a product gas pressure controller and; (3) a cyclically filled water feed tank. Development activities were completed at the subsystem as well as at the component level. An extensive test program including single cell, subsystem and integrated system testing was completed with the required test support accessories designed, fabricated, and assembled. Mini-product assurance activities were included throughout all phases of program activities. An extensive number of supporting technology studies were conducted to advance the technology base of the static feed water electrolysis process and to resolve problems.

Modified dough preparation for Alveograph analysis with limited flour sample size

USDA-ARS?s Scientific Manuscript database

Dough rheological characteristics, such as resistance-to-extension and extensibility, obtained by alveograph testing are important traits for determination of wheat and flour quality. A challenging issue that faces wheat breeding programs and some wheat-research projects is the relatively large flou...

Long-Term Monitoring of Pavement Maintenance Materials Test Sites

DOT National Transportation Integrated Search

1998-06-01

The Strategic Highway Research Program's {SHRP) H-106 pothole repair experiment was part of the most extensive pavement maintenance experiment ever conducted. Started under SHRP and continued under the Long-Term Pavement Performance program's Long-Te...

76 FR 37136 - Post-Entry Amendment (PEA) Processing Test: Modification, Clarification, and Extension

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

.... Customs and Border Protection's (CBP's) Post-Entry Amendment (PEA) Processing test, which allows the...: The Post-Entry Amendment (PEA) Processing test modification set forth in this document is effective...: Background I. Post-Entry Amendment Processing Test Program The Post-Entry Amendment (PEA) Processing test...

Techniques for Liquid Rocket Combustion Spontaneous Stability and Rough Combustion Assessments

NASA Technical Reports Server (NTRS)

Kenny, R. J.; Giacomoni, C.; Casiano, M. J.; Fischbach, S. R.

2016-01-01

This work presents techniques for liquid rocket engine combustion stability assessments with respect to spontaneous stability and rough combustion. Techniques covering empirical parameter extraction, which were established in prior works, are applied for three additional programs: the F-1 Gas Generator (F1GG) component test program, the RS-84 preburner component test program, and the Marshall Integrated Test Rig (MITR) program. Stability assessment parameters from these programs are compared against prior established spontaneous stability metrics and updates are identified. Also, a procedure for comparing measured with predicted mode shapes is presented, based on an extension of the Modal Assurance Criterion (MAC).

Converting from XML to HDF-EOS

NASA Technical Reports Server (NTRS)

Ullman, Richard; Bane, Bob; Yang, Jingli

2008-01-01

A computer program recreates an HDF-EOS file from an Extensible Markup Language (XML) representation of the contents of that file. This program is one of two programs written to enable testing of the schemas described in the immediately preceding article to determine whether the schemas capture all details of HDF-EOS files.

JT9D ceramic outer air seal system refinement program

NASA Technical Reports Server (NTRS)

Gaffin, W. O.

1982-01-01

The abradability and durability characteristics of the plasma sprayed system were improved by refinement and optimization of the plasma spray process and the metal substrate design. The acceptability of the final seal system for engine testing was demonstrated by an extensive rig test program which included thermal shock tolerance, thermal gradient, thermal cycle, erosion, and abradability tests. An interim seal system design was also subjected to 2500 endurance test cycles in a JT9D-7 engine.

Strongwomen® Program Evaluation: Effect of Strength Training Exercises on Physical Fitness of Participants

ERIC Educational Resources Information Center

Chaudhary, Anil Kumar; Van Horn, Beth; Corbin, Marilyn

2015-01-01

The Strongwomen® Program (SWP) is a nationally disseminated group strength-training exercise and nutrition education program delivered by Extension. The study reported here examined the effect of strength training exercises in SWP on improvement in physical fitness of program participants. Senior Fitness Test was used to collect data. Upon…

76 FR 23272 - Notice of Revision and Request for Extension of Approval of an Information Collection; Trichinae...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-26

... and certification of animal products and the inspection, testing, treatment, and certification of... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service [Docket No. APHIS-2011-0014... Certification Program AGENCY: Animal and Plant Health Inspection Service, USDA. ACTION: Revision and extension...

Development Status of the CECE Cryogenic Deep Throttling Demonstrator Engine

NASA Technical Reports Server (NTRS)

2008-01-01

As one of the first technology development programs awarded by NASA under the U.S. Space Exploration Policy (USSEP), the Pratt & Whitney Rocketdyne (PWR) Deep Throttling, Common Extensible Cryogenic Engine (CECE) program was selected by NASA in November 2004 to begin technology development and demonstration toward a deep throttling, cryogenic engine supporting ongoing trade studies for NASA's Lunar Lander descent stage. The CECE program leverages the maturity and previous investment of a flight-proven hydrogen/oxygen expander cycle engine, the PWR RLI0, to develop and demonstrate an unprecedented combination of reliability, safety, durability, throttlability, and restart capabilities in a high-energy, cryogenic engine. The testbed selected for the deep throttling demonstration phases of this program was a minimally modified RL10 engine, allowing for maximum current production engine commonality and extensibility with minimum program cost. Two series of demonstrator engine tests, the first in April-May 2006 and the second in March-April 2007, have demonstrated in excess of 10:1 throttling of the hydrogen/oxygen expander cycle engine. Both test series have explored a combustion instability ("chug") environment at low throttled power levels. These tests have provided an early demonstration of an enabling cryogenic propulsion concept with invaluable system-level technology data acquisition toward design and development risk mitigation for future CECE Demonstrator engine tests.

Testing of a flat conductor cable baseboard system for residential and commercial wiring

NASA Technical Reports Server (NTRS)

Hankins, J. D.

1974-01-01

The results of extensive testing (mechanical, electrical, chemical, environmental, thermal, and analytical) are reported for a flat conductor cable baseboard system for residential and commercial wiring. In all of the tests, Underwriters Laboratories (UL) Standards, UL Tentative Test Programs, or Accepted Engineering Practices were followed during test selection, test setup, and test accomplishment.

Support of Multidimensional Parallelism in the OpenMP Programming Model

NASA Technical Reports Server (NTRS)

Jin, Hao-Qiang; Jost, Gabriele

2003-01-01

OpenMP is the current standard for shared-memory programming. While providing ease of parallel programming, the OpenMP programming model also has limitations which often effect the scalability of applications. Examples for these limitations are work distribution and point-to-point synchronization among threads. We propose extensions to the OpenMP programming model which allow the user to easily distribute the work in multiple dimensions and synchronize the workflow among the threads. The proposed extensions include four new constructs and the associated runtime library. They do not require changes to the source code and can be implemented based on the existing OpenMP standard. We illustrate the concept in a prototype translator and test with benchmark codes and a cloud modeling code.

UserTesting.com: A Tool for Usability Testing of Online Resources

ERIC Educational Resources Information Center

Koundinya, Vikram; Klink, Jenna; Widhalm, Melissa

2017-01-01

Extension educators are increasingly using online resources in their program design and delivery. Usability testing is essential for ensuring that these resources are relevant and useful to learners. On the basis of our experiences with iteratively developing products using a testing service called UserTesting, we promote the use of fee-based…

Results of an independent evaluation of Project ALERT delivered in schools by Cooperative Extension.

PubMed

St Pierre, Tena L; Osgood, D Wayne; Mincemoyer, Claudia C; Kaltreider, D Lynne; Kauh, Tina J

2005-12-01

Reported are results of an independent effectiveness study of the Project ALERT drug prevention program implemented in eight Pennsylvania middle schools by outside program leaders employed by Cooperative Extension. In this randomized, 2-cohort longitudinal evaluation, 1,649 seventh-grade students completed a pretest and four waves of posttests over the 2-year program and 1-year follow-up. Project ALERT's effectiveness was tested through a 3-level hierarchical linear model. Analyses failed to yield any positive effects for substance use or mediators for use in the adult or teen-assisted delivery of the curriculum. An extensive set of additional analyses detected no differential program effects by student risk level, gender, school, or level of implementation quality. Potential explanations for outcomes relative to Project ALERT's original effectiveness trial are discussed, as well as implications for future research, including the need to conduct independent effectiveness studies of previously validated programs in a variety of contexts.

76 FR 59394 - Energy Conservation Program for Consumer Products: Publication of the Extension of Interim Waiver...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-26

... Electronics America, Inc. From the Department of Energy Residential Refrigerator and Refrigerator-Freezer Test... Electronics America, Inc. (Samsung) from energy efficiency test procedure requirements that are applicable to...

Clientele Differences of a Cooperative Extension Program as Related to Base of Organization.

ERIC Educational Resources Information Center

Gross, John G.

Conducted in Nebraska and Missouri, this study compared the clientele of an area specialist dairy testing program with the clientele of generalized county based programs to determine significant differences and their implications. Comparisons were made by age, educational level, size of farm business, farm ownership, participation in short courses…

75 FR 28231 - Cotton Classing, Testing and Standards: Notice of Request for an Extension and Revision to a...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-20

... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service [AMS-CN-10-0038, CN-10-002] Cotton... Management and Budget, for an extension and revision to the currently approved information collection Cotton... Shethir Riva, Chief, Research and Promotion, Cotton and Tobacco Programs, Agricultural Marketing Service...

Evaluation of On-Farm Food Safety Programming in Pennsylvania: Implications for Extension

ERIC Educational Resources Information Center

Nayak, Roshan; Tobin, Daniel; Thomson, Joan; Radhakrishna, Rama; LaBorde, Luke

2015-01-01

Penn State Extension conducted on-farm food safety workshops statewide to train fruit and vegetable growers on Good Agricultural Practices (GAPs). These workshops were evaluated using pre- and post-tests to assess the impact of the training on participating growers. Results indicate overall increases in produce growers' knowledge, attitudes,…

Homer City Multistream Coal Cleaning Demonstration: A progress report. Report for January 1979-July 1983

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carey, D.W.; Higgins, S.T.; Slowik, A.A.

1984-08-01

The report gives an overview of ongoing testing and evaluation of the Homer City Coal Cleaning Plant, built to enable the Homer City Power Complex to meet sulfur dioxide (SO2) emission levels mandated by the State of Pennsylvania and the U.S. Government. The plant was constructed as a result of an extensive comparative evaluation of flue gas desulfurization (FGD) and physical coal cleaning. The Homer City System, the Multistream Coal Cleaning System (MCCS), was chosen as an economical alternative to FGD. The plant contains circuits for cleaning coarse, medium, and fine coals and for recovering fine and very fine coals.more » The dominant type of cleaning equipment used in the plant is the dense medium cyclone. The original '93 plant' configuration was never able to clean coal to the conditions specified in the plant design. An extensive test and evaluation program was begun to identify and correct the causes of plant operating problems. After extensive pilot plant equipment tests and engineering studies were completed, recommendations were made for plant modifications necessary to correct the design and operating deficiencies of the plant. Extensive modifications were made to one of two parallel processing trains in the plant (the 'B' circuits), and a test program was initiated to evaluate these corrective measures. The modified 'B' circuits have not yet met design conditions.« less

AMSD Cryo Actuator Testing

NASA Technical Reports Server (NTRS)

Mullette, Mark; Matthews, Gary; Russell, Kevin (Technical Monitor)

2002-01-01

The actuator technology required for AMSD and subsequently NGST are critical in the successful development for future cryogenic systems. Kodak has undertaken an extensive test plan to determine the performance of the force actuators developed under the AMSD program. These actuators are currently in testing at MSFC and are expected to finish this test cycle in early June 2002.

Apollo experience report environmental acceptance testing

NASA Technical Reports Server (NTRS)

Laubach, C. H. M.

1976-01-01

Environmental acceptance testing was used extensively to screen selected spacecraft hardware for workmanship defects and manufacturing flaws. The minimum acceptance levels and durations and methods for their establishment are described. Component selection and test monitoring, as well as test implementation requirements, are included. Apollo spacecraft environmental acceptance test results are summarized, and recommendations for future programs are presented.

Application of Statistics in Engineering Technology Programs

ERIC Educational Resources Information Center

Zhan, Wei; Fink, Rainer; Fang, Alex

2010-01-01

Statistics is a critical tool for robustness analysis, measurement system error analysis, test data analysis, probabilistic risk assessment, and many other fields in the engineering world. Traditionally, however, statistics is not extensively used in undergraduate engineering technology (ET) programs, resulting in a major disconnect from industry…

Apollo-Soyuz test project docking system

NASA Technical Reports Server (NTRS)

Swan, W. L., Jr.

1976-01-01

The United States and Soviet Union in July 1975 successfully completed a joint space mission utilizing each country's spacecraft and the compatible docking system designed and fabricated by each country. The compatible docking system is described, along with the extensive research, development, and testing leading up to the successful mission. It also describes the formulation and implementation of methods for breaking the language barrier, bridging the extensive distances for communication and travel, and adjusting to each country's different culture during the three-year development program.

The 106th Congress: What to Watch.

ERIC Educational Resources Information Center

Fege, Arnold F.

1999-01-01

The Improving America's School Act funds numerous small programs that dissipate its purpose and increase its vulnerability. Congress is debating extension of federal roles into areas such as social promotion, parental rights, reading programs, class-size reduction, and national voluntary tests. Changing budget rules pits education against military…

Boiler-turbine life extension

DOE Office of Scientific and Technical Information (OSTI.GOV)

Natzkov, S.; Nikolov, M.

1995-12-01

The design life of the main power equipment-boilers and turbines is about 105 working hours. The possibilities for life extension are after normatively regulated control tests. The diagnostics and methodology for Boilers and Turbines Elements Remaining Life Assessment using up to date computer programs, destructive and nondestructive control of metal of key elements of units equipment, metal creep and low cycle fatigue calculations. As well as data for most common damages and some technical decisions for elements life extension are presented.

COMPUTATIONAL TOXICOLOGY - OBJECTIVE 2: DEVELOPING APPROACHES FOR PRIORITIZING CHEMICALS FOR SUBSEQUENT SCREENING AND TESTING

EPA Science Inventory

One of the strategic objectives of the Computational Toxicology Program is to develop approaches for prioritizing chemicals for subsequent screening and testing. Approaches currently available for this process require extensive resources. Therefore, less costly and time-extensi...

Interpretation and Utilization of Scores on the Air Force Officer Qualifying Test.

ERIC Educational Resources Information Center

Miller, Robert E.

The report summarizes a large body of data relevant to the proper interpretation and use of aptitude scores on the Air Force Officer Qualifying Test (AFOQT). Included are descriptions of the AFOQT testing program and the test itself. Technical data include an extensive sampling of validation studies covering predictors of success in pilot…

Flight flutter testing of multi-jet aircraft

NASA Technical Reports Server (NTRS)

Bartley, J.

1975-01-01

Extensive flight flutter tests were conducted by BAC on B-52 and KC-135 prototype airplanes. The need for and importance of these flight flutter programs to Boeing airplane design are discussed. Basic concepts of flight flutter testing of multi-jet aircraft and analysis of the test data will be presented. Exciter equipment and instrumentation employed in these tests will be discussed.

Computer Programs (Turbomachinery)

NASA Technical Reports Server (NTRS)

1978-01-01

NASA computer programs are extensively used in design of industrial equipment. Available from the Computer Software Management and Information Center (COSMIC) at the University of Georgia, these programs are employed as analysis tools in design, test and development processes, providing savings in time and money. For example, two NASA computer programs are used daily in the design of turbomachinery by Delaval Turbine Division, Trenton, New Jersey. The company uses the NASA splint interpolation routine for analysis of turbine blade vibration and the performance of compressors and condensers. A second program, the NASA print plot routine, analyzes turbine rotor response and produces graphs for project reports. The photos show examples of Delaval test operations in which the computer programs play a part. In the large photo below, a 24-inch turbine blade is undergoing test; in the smaller photo, a steam turbine rotor is being prepared for stress measurements under actual operating conditions; the "spaghetti" is wiring for test instrumentation

Exploring the Potential of In-Service Training through Distance Education.

ERIC Educational Resources Information Center

Kelsey, Timothy W.; Mincemoyer, Claudia C.

2001-01-01

Survey responses from 228 Pennsylvania extension staff revealed time- or travel-related reasons inhibited inservice participation. They preferred regional locations over any other, though they were receptive to having some inservice programs delivered using distance education technologies. A pilot test of quarterly satellite inservice programs was…

Use of Bennett's Hierarchical Model in the Evaluation of the Extension Education Program for Cacao Farmers in the Northeast Region of the Dominican Republic. Summary of Research 54.

ERIC Educational Resources Information Center

De los Santos, Saturnino; Norland, Emmalou Van Tilburg

A study evaluated the cacao farmer training program in the Dominican Republic by testing hypothesized relationships among reactions, knowledge and skills, attitudes, aspirations, and some selected demographic characteristics of farmers who attended programs. Bennett's hierarchical model of program evaluation was used as the framework of the study.…

The Wisconsin Test of Adult Basic Education (WITABE).

ERIC Educational Resources Information Center

Pandey, Tej N.; Cleary, T. Anne

A description is given of "The Wisconsin Test of Adult Basic Education (WITABE)" which was developed specifically to measure the achievement of the individuals enrolled in the Rural Family Development (RGD) program at the University Extension, University of Wisconsin. The test is divided into three main parts or subtests: subtests 1 and…

Two-Dimensional Bifurcated Inlet/Engine Tests Completed in 10- by 10-Foot Supersonic Wind Tunnel

NASA Technical Reports Server (NTRS)

Saunders, John D.

1999-01-01

A Two-Dimensional Bifurcated (2DB) Inlet was successfully tested in NASA Lewis Research Center s 10- by 10-Foot Supersonic Wind Tunnel. These tests were the culmination of a collaborative effort between the Boeing Company, General Electric, Pratt & Whitney, and Lewis. Extensive support in-house at Lewis contributed significantly to the progress and accomplishment of this test. The results, which met or exceeded many of the High-Speed Research (HSR) Program goals, were used to revise system studies within the HSR Program. The HSR Program is focused on developing low-noise, low-polluting, high-efficiency supersonic commercial aircraft. A supersonic inlet is an important component of an efficient, low-noise vehicle.

SLHAplus: A library for implementing extensions of the standard model

NASA Astrophysics Data System (ADS)

Bélanger, G.; Christensen, Neil D.; Pukhov, A.; Semenov, A.

2011-03-01

We provide a library to facilitate the implementation of new models in codes such as matrix element and event generators or codes for computing dark matter observables. The library contains an SLHA reader routine as well as diagonalisation routines. This library is available in CalcHEP and micrOMEGAs. The implementation of models based on this library is supported by LanHEP and FeynRules. Program summaryProgram title: SLHAplus_1.3 Catalogue identifier: AEHX_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHX_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 6283 No. of bytes in distributed program, including test data, etc.: 52 119 Distribution format: tar.gz Programming language: C Computer: IBM PC, MAC Operating system: UNIX (Linux, Darwin, Cygwin) RAM: 2000 MB Classification: 11.1 Nature of problem: Implementation of extensions of the standard model in matrix element and event generators and codes for dark matter observables. Solution method: For generic extensions of the standard model we provide routines for reading files that adopt the standard format of the SUSY Les Houches Accord (SLHA) file. The procedure has been generalized to take into account an arbitrary number of blocks so that the reader can be used in generic models including non-supersymmetric ones. The library also contains routines to diagonalize real and complex mass matrices with either unitary or bi-unitary transformations as well as routines for evaluating the running strong coupling constant, running quark masses and effective quark masses. Running time: 0.001 sec

Development tests for the 2.5 megawatt Mod-2 wind turbine generator

NASA Technical Reports Server (NTRS)

Andrews, J. S.; Baskin, J. M.

1982-01-01

The 2.5 megawatt MOD-2 wind turbine generator test program is discussed. The development of the 2.5 megawatt MOD-2 wind turbine generator included an extensive program of testing which encompassed verification of analytical procedures, component development, and integrated system verification. The test program was to assure achievement of the thirty year design operational life of the wind turbine system as well as to minimize costly design modifications which would otherwise have been required during on site system testing. Computer codes were modified, fatigue life of structure and dynamic components were verified, mechanical and electrical component and subsystems were functionally checked and modified where necessary to meet system specifications, and measured dynamic responses of coupled systems confirmed analytical predictions.

Aspect-Oriented Monitoring of C Programs

NASA Technical Reports Server (NTRS)

Havelund, Klaus; VanWyk, Eric

2008-01-01

The paper presents current work on extending ASPECTC with state machines, resulting in a framework for aspect-oriented monitoring of C programs. Such a framework can be used for testing purposes, or it can be part of a fault protection strategy. The long term goal is to explore the synergy between the fields of runtime verification, focused on program monitoring, and aspect-oriented programming, focused on more general program development issues. The work is inspired by the observation that most work in this direction has been done for JAVA, partly due to the lack of easily accessible extensible compiler frameworks for C. The work is performed using the SILVER extensible attribute grammar compiler framework, in which C has been defined as a host language. Our work consists of extending C with ASPECTC, and subsequently to extend ASPECTC with state machines.

Additional extensions to the NASCAP computer code, volume 1

NASA Technical Reports Server (NTRS)

Mandell, M. J.; Katz, I.; Stannard, P. R.

1981-01-01

Extensions and revisions to a computer code that comprehensively analyzes problems of spacecraft charging (NASCAP) are documented. Using a fully three dimensional approach, it can accurately predict spacecraft potentials under a variety of conditions. Among the extensions are a multiple electron/ion gun test tank capability, and the ability to model anisotropic and time dependent space environments. Also documented are a greatly extended MATCHG program and the preliminary version of NASCAP/LEO. The interactive MATCHG code was developed into an extremely powerful tool for the study of material-environment interactions. The NASCAP/LEO, a three dimensional code to study current collection under conditions of high voltages and short Debye lengths, was distributed for preliminary testing.

Space Shuttle main engine product improvement

NASA Technical Reports Server (NTRS)

Lucci, A. D.; Klatt, F. P.

1985-01-01

The current design of the Space Shuttle Main Engine has passed 11 certification cycles, amassed approximately a quarter million seconds of engine test time in 1200 tests and successfully launched the Space Shuttle 17 times of 51 engine launches through May 1985. Building on this extensive background, two development programs are underway at Rocketdyne to improve the flow of hot gas through the powerhead and evaluate the changes to increase the performance margins in the engine. These two programs, called Phase II+ and Technology Test Bed Precursor program are described. Phase II+ develops a two-tube hot-gas manifold that improves the component environment. The Precursor program will evaluate a larger throat main combustion chamber, conduct combustion stability testing of a baffleless main injector, fabricate an experimental weld-free heat exchanger tube, fabricate and test a high pressure oxidizer turbopump with an improved inlet, and develop and test methods for reducing temperature transients at start and shutdown.

Using Testbanking To Implement Classroom Management/Extension through the Use of Computers.

ERIC Educational Resources Information Center

Thommen, John D.

Testbanking provides teachers with an effective, low-cost, time-saving opportunity to improve the testing aspect of their classes. Testbanking, which involves the use of a testbank program and a computer, allows teachers to develop and generate tests and test-forms with a minimum of effort. Teachers who test using true and false, multiple choice,…

HYPERDIRE-HYPERgeometric functions DIfferential REduction: Mathematica-based packages for the differential reduction of generalized hypergeometric functions: Lauricella function FC of three variables

NASA Astrophysics Data System (ADS)

Bytev, Vladimir V.; Kniehl, Bernd A.

2016-09-01

We present a further extension of the HYPERDIRE project, which is devoted to the creation of a set of Mathematica-based program packages for manipulations with Horn-type hypergeometric functions on the basis of differential equations. Specifically, we present the implementation of the differential reduction for the Lauricella function FC of three variables. Catalogue identifier: AEPP_v4_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEPP_v4_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: GNU General Public License, version 3 No. of lines in distributed program, including test data, etc.: 243461 No. of bytes in distributed program, including test data, etc.: 61610782 Distribution format: tar.gz Programming language: Mathematica. Computer: All computers running Mathematica. Operating system: Operating systems running Mathematica. Classification: 4.4. Does the new version supersede the previous version?: No, it significantly extends the previous version. Nature of problem: Reduction of hypergeometric function FC of three variables to a set of basis functions. Solution method: Differential reduction. Reasons for new version: The extension package allows the user to handle the Lauricella function FC of three variables. Summary of revisions: The previous version goes unchanged. Running time: Depends on the complexity of the problem.

Demonstration of the Military Ecological Risk Assessment Framework (MERAF): Apache Longbow - Hellfire Missile Test at Yuma Proving Ground

DTIC Science & Technology

2001-11-01

that there were· no· target misses. The Hellfire missile does not have a depleted uranium head . . -,, 2.2.2.3 Tank movement During the test, the...guide otber users through the use of this. complicated program. The_input data files for NOISEMAP consist of a root file name with several extensions...SOURCES subdirectory. This file will have the root file name followed by an accession number, then the .bps extension. The user must check the *.log

Overview: Western Regional applications Program (WRAP) status

NASA Technical Reports Server (NTRS)

Norman, S. M.

1981-01-01

Interactions with all 14 of the states in the Western Region over the past three years are reviewed from NASA's perspective. Outreach and training programs using the M mobile analysis and training extension van, the University Program, classes at the Ames Center, demonstration tests with state agencies, and surveying the needs of local governments are highlighted. Planned activities, the continuance of ASVT's, and the impact of the budget cuts on NASA'S technology program are also considered.

76 FR 21700 - Notice of Request for Extension and Revision of a Currently Approved Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-18

... analyses has its own methodology and time necessary to perform the analyses. (3) Aflatoxin in Pistachios Program (A High Performance Liquid Chromatography (HPLC) method for exporting pistachios to European Union requested by the California Pistachio Committee) and the domestic program using HPLC or a test kit analysis...

Decentralization and Educational Performance: Evidence from the PROHECO Community School Program in Rural Honduras

ERIC Educational Resources Information Center

Di Gropello, Emanuela; Marshall, Jeffery H.

2011-01-01

We analyze the effectiveness of the Programa Hondureno de Educacion Comunitaria (PROHECO) community school program in rural Honduras. The data include standardized tests and extensive information on school, teacher, classroom and community features for 120 rural schools drawn from 15 states. Using academic achievement decompositions we find that…

40 CFR 80.50 - General test procedure requirements for augmentation of the emission models.

Code of Federal Regulations, 2014 CFR

2014-07-01

... § 80.45. (1) VOC, NOX, CO, and CO2 emissions must be measured for all fuel-vehicle combinations tested. (2) Toxics emissions must be measured when testing the extension fuels per the requirements of § 80... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Reformulated...

40 CFR 80.50 - General test procedure requirements for augmentation of the emission models.

Code of Federal Regulations, 2010 CFR

2010-07-01

... § 80.45. (1) VOC, NOX, CO, and CO2 emissions must be measured for all fuel-vehicle combinations tested. (2) Toxics emissions must be measured when testing the extension fuels per the requirements of § 80... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Reformulated...

40 CFR 80.50 - General test procedure requirements for augmentation of the emission models.

Code of Federal Regulations, 2012 CFR

2012-07-01

... § 80.45. (1) VOC, NOX, CO, and CO2 emissions must be measured for all fuel-vehicle combinations tested. (2) Toxics emissions must be measured when testing the extension fuels per the requirements of § 80... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Reformulated...

40 CFR 80.50 - General test procedure requirements for augmentation of the emission models.

Code of Federal Regulations, 2011 CFR

2011-07-01

... § 80.45. (1) VOC, NOX, CO, and CO2 emissions must be measured for all fuel-vehicle combinations tested. (2) Toxics emissions must be measured when testing the extension fuels per the requirements of § 80... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Reformulated...

Documentation and archiving of the Space Shuttle wind tunnel test data base. Volume 2: User's Guide to the Archived Data Base

NASA Technical Reports Server (NTRS)

Romere, Paul O.; Brown, Steve Wesley

1995-01-01

Development of the Space Shuttle necessitated an extensive wind tunnel test program, with the cooperation of all the major wind tunnels in the United States. The result was approximately 100,000 hours of Space Shuttle wind tunnel testing conducted for aerodynamics, heat transfer, and structural dynamics. The test results were converted into Chrysler DATAMAN computer program format to facilitate use by analysts, a very cost effective method of collecting the wind tunnel test results from many test facilities into one centralized location. This report provides final documentation of the Space Shuttle wind tunnel program. The two-volume set covers the evolution of Space Shuttle aerodynamic configurations and gives wind tunnel test data, titles of wind tunnel data reports, sample data sets, and instructions for accessing the digital data base.

Documentation and archiving of the Space Shuttle wind tunnel test data base. Volume 1: Background and description

NASA Technical Reports Server (NTRS)

Romere, Paul O.; Brown, Steve Wesley

1995-01-01

Development of the space shuttle necessitated an extensive wind tunnel test program, with the cooperation of all the major wind tunnels in the United States. The result was approximately 100,000 hours of space shuttle wind tunnel testing conducted for aerodynamics, heat transfer, and structural dynamics. The test results were converted into Chrysler DATAMAN computer program format to facilitate use by analysts, a very cost effective method of collecting the wind tunnel test results from many test facilities into one centralized location. This report provides final documentation of the space shuttle wind tunnel program. The two-volume set covers evolution of space shuttle aerodynamic configurations and gives wind tunnel test data, titles of wind tunnel data reports, sample data sets, and instructions for accessing the digital data base.

Heavy-section steel technology and irradiation programs-retrospective and prospective views

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nanstad, Randy K; Bass, Bennett Richard; Rosseel, Thomas M

In 1965, the Atomic Energy Commission (AEC), at the advice of the Advisory Committee on Reactor Safeguards (ACRS), initiated the process that resulted in the establishment of the Heavy Section Steel Technology (HSST) Program at Oak Ridge National Laboratory (ORNL). Dr. Spencer H. Bush of Battelle Northwest Laboratory, the man being honored by this symposium, representing the ACRS, was one of the Staff Advisors for the program and helped to guide its technical direction. In 1989, the Heavy-Section Steel Irradiation (HSSI) Program, formerly the HSST task on irradiation effects, was formed as a separate program, and this year the HSST/HSSImore » Programs, sponsored by the U.S. Nuclear Regulatory Commission (USNRC), celebrate 40 years of continuous research oriented toward the safety of light-water nuclear reactor pressure vessels. This paper presents a summary of results from those programs with a view to future activities. The HSST Program was established in 1967 and initially included extensive investigations of heavy-section low-alloy steel plates, forgings, and welds, including metallurgical studies, mechanical properties, fracture toughness (quasi-static and dynamic), fatigue crack-growth, and crack arrest toughness. Also included were irradiation effects studies, thermal shock analyses, testing of thick-section tensile and fracture specimens, and non-destructive testing. In the subsequent decades, the HSST Program conducted extensive large-scale experiments with intermediate-size vessels (with varying size flaws) pressurized to failure, similar experiments under conditions of thermal shock and even pressurized thermal shock (PTS), wide-plate crack arrest tests, and biaxial tests with cruciform-shaped specimens. Extensive analytical and numerical studies accompanied these experiments, including the development of computer codes such as the recent Fracture Analysis of Vessels Oak Ridge (FAVOR) code currently being used for PTS evaluations. In the absence of radiation damage to the RPV, fracture of the vessel is improbable. However, exposure to high energy neutrons can result in embrittlement of radiation-sensitive RPV materials. The HSSI Program has conducted a series of experiments to assess the effects of neutron irradiation on RPV material behavior, especially fracture toughness. These studies have included RPV plates and welds, varying chemical compositions, and fracture toughness specimens up to 4 in. thickness. The results of these investigations, in conjunction with results from commercial reactor surveillance programs, are used to develop a methodology for the prediction of radiation effects on RPV materials. Results from the HSST and HSSI Program are used by the USNRC in the evaluation of RPV integrity and regulation of overall nuclear plant safety.« less

Eccentric Training and Static Stretching Improve Hamstring Flexibility of High School Males

PubMed Central

Bandy, William D.

2004-01-01

Objective: To determine if the flexibility of high-school-aged males would improve after a 6-week eccentric exercise program. In addition, the changes in hamstring flexibility that occurred after the eccentric program were compared with a 6-week program of static stretching and with a control group (no stretching). Design and Setting: We used a test-retest control group design in a laboratory setting. Subjects were assigned randomly to 1 of 3 groups: eccentric training, static stretching, or control. Subjects: A total of 69 subjects, with a mean age of 16.45 ± 0.96 years and with limited hamstring flexibility (defined as 20° loss of knee extension measured with the thigh held at 90° of hip flexion) were recruited for this study. Measurements: Hamstring flexibility was measured using the passive 90/90 test before and after the 6-week program. Results: Differences were significant for test and for the test-by-group interaction. Follow-up analysis indicated significant differences between the control group (gain = 1.67°) and both the eccentric-training (gain = 12.79°) and static-stretching (gain = 12.05°) groups. No difference was found between the eccentric and static-stretching groups. Conclusions: The gains achieved in range of motion of knee extension (indicating improvement in hamstring flexibility) with eccentric training were equal to those made by statically stretching the hamstring muscles. PMID:15496995

Eccentric Training and Static Stretching Improve Hamstring Flexibility of High School Males.

PubMed

Nelson, Russell T; Bandy, William D

2004-09-01

OBJECTIVE: To determine if the flexibility of high-school-aged males would improve after a 6-week eccentric exercise program. In addition, the changes in hamstring flexibility that occurred after the eccentric program were compared with a 6-week program of static stretching and with a control group (no stretching). DESIGN AND SETTING: We used a test-retest control group design in a laboratory setting. Subjects were assigned randomly to 1 of 3 groups: eccentric training, static stretching, or control. SUBJECTS: A total of 69 subjects, with a mean age of 16.45 +/- 0.96 years and with limited hamstring flexibility (defined as 20 degrees loss of knee extension measured with the thigh held at 90 degrees of hip flexion) were recruited for this study. MEASUREMENTS: Hamstring flexibility was measured using the passive 90/90 test before and after the 6-week program. RESULTS: Differences were significant for test and for the test-by-group interaction. Follow-up analysis indicated significant differences between the control group (gain = 1.67 degrees ) and both the eccentric-training (gain = 12.79 degrees ) and static-stretching (gain = 12.05 degrees ) groups. No difference was found between the eccentric and static-stretching groups. CONCLUSIONS: The gains achieved in range of motion of knee extension (indicating improvement in hamstring flexibility) with eccentric training were equal to those made by statically stretching the hamstring muscles.

Locating Tests and Measurement Instruments for Assessment

ERIC Educational Resources Information Center

Mastel, Kristen; Morris-Knower, Jim; Marsalis, Scott

2016-01-01

Extension educators, staff, and specialists need to use surveys and other measurement instruments to assess their programming and conduct other research. Challenges in locating tests and measurement tools, however, include lack of time and lack of familiarity with techniques that can be used to find them. This article discusses library resources…

Test Generator for MATLAB Simulations

NASA Technical Reports Server (NTRS)

Henry, Joel

2011-01-01

MATLAB Automated Test Tool, version 3.0 (MATT 3.0) is a software package that provides automated tools that reduce the time needed for extensive testing of simulation models that have been constructed in the MATLAB programming language by use of the Simulink and Real-Time Workshop programs. MATT 3.0 runs on top of the MATLAB engine application-program interface to communicate with the Simulink engine. MATT 3.0 automatically generates source code from the models, generates custom input data for testing both the models and the source code, and generates graphs and other presentations that facilitate comparison of the outputs of the models and the source code for the same input data. Context-sensitive and fully searchable help is provided in HyperText Markup Language (HTML) format.

A gas flow indicator for portable life support systems

NASA Technical Reports Server (NTRS)

Bass, R. L., III; Schroeder, E. C.

1975-01-01

A three-part program was conducted to develop a gas flow indicator (GFI) to monitor ventilation flow in a portable life support system. The first program phase identified concepts which could potentially meet the GFI requirements. In the second phase, a working breadboard GFI, based on the concept of a pressure sensing diaphragm-aneroid assembly connected to a venturi, was constructed and tested. Extensive testing of the breadboard GFI indicated that the design would meet all NASA requirements including eliminating problems experienced with the ventilation flow sensor used in the Apollo program. In the third program phase, an optimized GFI was designed by utilizing test data obtained on the breadboard unit. A prototype unit was constructed using prototype materials and fabrication techniques, and performance tests indicated that the prototype GFI met or exceeded all requirements.

Uses of infrared thermography in the low-cost solar array program

NASA Technical Reports Server (NTRS)

Glazer, S. D.

1982-01-01

The Jet Propulsion Laboratory has used infrared thermography extensively in the Low-Cost Solar Array (LSA) photovoltaics program. A two-dimensional scanning infrared radiometer has been used to make field inspections of large free-standing photovoltaic arrays and smaller demonstration sites consisting of integrally mounted rooftop systems. These field inspections have proven especially valuable in the research and early development phases of the program, since certain types of module design flaws and environmental degradation manifest themselves in unique thermal patterns. The infrared camera was also used extensively in a series of laboratory tests on photovoltaic cells to obtain peak cell temperatures and thermal patterns during off-design operating conditions. The infrared field inspections and the laboratory experiments are discussed, and sample results are presented.

WSTF Propulsion and Pyrotechnics Corrective Action Test Program Status-2000

NASA Technical Reports Server (NTRS)

Saulsberry, R.; Ramirez, J.; Julien, H. L.; Hart, M.; Smith, W.; Bement, L.; Meagher, N. E.

2000-01-01

Extensive propulsion and pyrotechnic testing has been in progress at the NASA Johnson Space Center White Sands Test Facility (WSTF) since 1995. This started with the Mars Observer Propulsion and Pyrotechnics Corrective Action Test Program (MOCATP). The MOCATP has concluded, but extensive pyrovalve testing and research and development has continued at WSTF. The capability to accurately analyze and measure pyrovalve combustion product blow-by, evaluate propellant explosions initiated by blow-by, and characterize pyrovalve operation continues to be used and improved. This paper contains an overview of testing since MOCATP inception, but focuses on accomplishments since the status was last reported at the 35th Joint Propulsion Conference, June, 1999. This new activity includes evaluation of 3/8 inch Conax pyrovalves; development and testing of advanced pyrovalve technologies; investigation of nondestructive evaluation techniques to inspect pyrotechnically induced hydrazine explosions both through testing and modeling. Data from this collection of projects are now being formatted into a pyrovalve applications and testing handbook and consensus standard to benefit pyrovalve users and spacecraft designers. The handbook is briefly described here and in more detail in a separate paper. To increase project benefit, pyrovalve manufacturers are encouraged to provide additional valves for testing and consideration, and feedback is encouraged in all aspects of the pyrotechnic projects.

CECE: Expanding the Envelope of Deep Throttling in Liquid Oxygen/Liquid Hydrogen Rocket Engines For NASA Exploration Missions

NASA Technical Reports Server (NTRS)

Giuliano, Victor J.; Leonard, Timothy G.; Lyda, Randy T.; Kim, Tony S.

2010-01-01

As one of the first technology development programs awarded by NASA under the Vision for Space Exploration, the Pratt & Whitney Rocketdyne (PWR) Deep Throttling, Common Extensible Cryogenic Engine (CECE) program was selected by NASA in November 2004 to begin technology development and demonstration toward a deep throttling, cryogenic engine supporting ongoing trade studies for NASA s Lunar Lander descent stage. The CECE program leverages the maturity and previous investment of a flight-proven hydrogen/oxygen expander cycle engine, the PWR RL10, to develop technology and demonstrate an unprecedented combination of reliability, safety, durability, throttlability, and restart capabilities in a high-energy cryogenic engine. The testbed selected for the deep throttling demonstration phases of this program was a minimally modified RL10 engine, allowing for maximum current production engine commonality and extensibility with minimum program cost. Three series of demonstrator engine tests, the first in April-May 2006, the second in March-April 2007 and the third in November-December 2008, have demonstrated up to 13:1 throttling (104% to 8% thrust range) of the hydrogen/oxygen expander cycle engine. The first two test series explored a propellant feed system instability ("chug") environment at low throttled power levels. Lessons learned from these two tests were successfully applied to the third test series, resulting in stable operation throughout the 13:1 throttling range. The first three tests have provided an early demonstration of an enabling cryogenic propulsion concept, accumulating over 5,000 seconds of hot fire time over 27 hot fire tests, and have provided invaluable system-level technology data toward design and development risk mitigation for the NASA Altair and future lander propulsion system applications. This paper describes the results obtained from the highly successful third test series as well as the test objectives and early results obtained from a fourth test series conducted over March-May 2010

Issues and Potential Program on Denatured Fuel Utilization.

DTIC Science & Technology

1978-12-01

HTGR fuel develop - ment program ; 4. coated particles of (U,Th)02 have been extensively tested as potential HTGR fuels . A detailed summary of the...current scrap and waste treatment requirements. dBase case for all HTGR (Prismatic Fuel Element) cases based on data in "Summary Program Plan...Alternate Program for HTGR Fuel Recycle," April 11, 1975, Draft. 19 a --- AC8NCi09 The principal factors that result in a nominally-higher cost for

Proceedings of the Annual Conference of the Association for International Agricultural and Extension Education (15th, Port of Spain, Trinidad and Tobago March 21-26, 1999).

ERIC Educational Resources Information Center

Richardson, John G., Ed.

This proceedings contains session topics: extension systems, extension programs, extension evaluation, program impacts, extension management, extension reform, experiential learning, program delivery, farming systems research, professional training and development, program strategies, teaching effectiveness, organizational leadership, extension…

NASA Data Acquisition System Software Development for Rocket Propulsion Test Facilities

NASA Technical Reports Server (NTRS)

Herbert, Phillip W., Sr.; Elliot, Alex C.; Graves, Andrew R.

2015-01-01

Current NASA propulsion test facilities include Stennis Space Center in Mississippi, Marshall Space Flight Center in Alabama, Plum Brook Station in Ohio, and White Sands Test Facility in New Mexico. Within and across these centers, a diverse set of data acquisition systems exist with different hardware and software platforms. The NASA Data Acquisition System (NDAS) is a software suite designed to operate and control many critical aspects of rocket engine testing. The software suite combines real-time data visualization, data recording to a variety formats, short-term and long-term acquisition system calibration capabilities, test stand configuration control, and a variety of data post-processing capabilities. Additionally, data stream conversion functions exist to translate test facility data streams to and from downstream systems, including engine customer systems. The primary design goals for NDAS are flexibility, extensibility, and modularity. Providing a common user interface for a variety of hardware platforms helps drive consistency and error reduction during testing. In addition, with an understanding that test facilities have different requirements and setups, the software is designed to be modular. One engine program may require real-time displays and data recording; others may require more complex data stream conversion, measurement filtering, or test stand configuration management. The NDAS suite allows test facilities to choose which components to use based on their specific needs. The NDAS code is primarily written in LabVIEW, a graphical, data-flow driven language. Although LabVIEW is a general-purpose programming language; large-scale software development in the language is relatively rare compared to more commonly used languages. The NDAS software suite also makes extensive use of a new, advanced development framework called the Actor Framework. The Actor Framework provides a level of code reuse and extensibility that has previously been difficult to achieve using LabVIEW. The

76 FR 39878 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-07

.... Proposed Project Pulmonary Function Testing Course Approval Program, 29 CFR 1910.1043--Extension--(OMB No... Occupational Safety and Health Administration's Cotton Dust Standard, 29 CFR 1920.1043, for approving courses...

76 FR 29243 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

.... Proposed Project Pulmonary Function Testing Course Approval Program, 29 CFR 1910.1043--Extension--(OMB No... Occupational Safety and Health Administration's Cotton Dust Standard, 29 CFR 1920.1043, for approving courses...

EMPTAC (Electromagnetic Pulse Test Aircraft) user's guide

NASA Astrophysics Data System (ADS)

Cleaveland, Dale R.; Burkhard, Avery

1988-04-01

This guide was established to give test managers a way to familiarize themselves with the Air Force Weapons Laboratory's electromagnetic pulse (EMP) test aircraft program located at Kirtland Air Force Base (KAFB), New Mexico. Brief descriptions of the available EMP test facilities at KAFB are also included. This guide should give prospective customers (users) adequate information to scope the magnitude of their test effort and to accomplish general planning without extensive involvement in test execution details.

Effect of stretching program in an industrial workplace on hamstring flexibility and sagittal spinal posture of adult women workers: a randomized controlled trial.

PubMed

Muyor, José M; López-Miñarro, Pedro A; Casimiro, Antonio J

2012-01-01

To determine the effect of a stretching program performed in the workplace on the hamstring muscle extensibility and sagittal spinal posture of adult women. Fifty-eight adult women volunteers (mean age of 44.23 ± 8.87 years) from a private fruit and vegetable company were randomly assigned to experimental (n=27) or control (n=31) groups. The experimental group performed three exercises of hamstrings stretching of 20 seconds per exercise, three sessions a week for a period of 12 weeks. The control group did not participate in any hamstring stretching program. Hamstring flexibility was evaluated through the passive straight leg raise test and toe-touch test, performed both before and after the stretching program. Thoracic and lumbar curvatures and pelvic inclination were measured in relaxed standing and toe-touch test with a Spinal Mouse. Significant increases (p < 0.01) in toe-touch score and straight leg raise angle (in both legs) were found in the experimental group during post-test, while the control group showed a non-significant decrease for both toe-touch score and straight leg raise test. A significant decrease in thoracic curve and significant increase in pelvic inclination were found in the toe-touch test for the experimental group (p <0.05). However, no significant changes were found in standing posture for any group. Hamstring stretching exercises performed in the working place are effective for increasing hamstring muscle extensibility. This increase generates a more aligned thoracic curve and more anterior pelvic inclination when maximal trunk flexion is performed.

"I Don't Know" and Multiple Choice Analysis of Pre- and Post-Tests

ERIC Educational Resources Information Center

Spears, Karen; Wilson, Mary

2010-01-01

Evaluation is an essential component of any Extension education program. One tool, the pre- and post-test, provides measurable evaluation data. Yet often the answer "I don't know" or all possible answers to a multiple choice question are not included in the repeated measure analysis. Because more than two answers are offered, the test of marginal…

Development of a CCD based solar speckle imaging system

NASA Astrophysics Data System (ADS)

Nisenson, Peter; Stachnik, Robert V.; Noyes, Robert W.

1986-02-01

A program to develop software and hardware for the purpose of obtaining high angular resolution images of the solar surface is described. The program included the procurement of a Charge Coupled Devices imaging system; an extensive laboratory and remote site testing of the camera system; the development of a software package for speckle image reconstruction which was eventually installed and tested at the Sacramento Peak Observatory; and experiments of the CCD system (coupled to an image intensifier) for low light level, narrow spectral band solar imaging.

Status and plans for the ANOPP/HSR prediction system

NASA Technical Reports Server (NTRS)

Nolan, Sandra K.

1992-01-01

ANOPP is a comprehensive prediction system which was developed and validated by NASA. Because ANOPP is a system prediction program, it allows aerospace industry researchers to create trade-off studies with a variety of aircraft noise problems. The extensive validation of ANOPP allows the program results to be used as a benchmark for testing other prediction codes.

PERFORMANCE CRITERIA, A SYSTEM OF COMMUNICATION FOR MOBILIZING BUILDING INDUSTRY RESOURCES.

ERIC Educational Resources Information Center

JACQUES, RICHARD G.

A PROGRAM TO TEST AND DEMONSTRATE THE EFFICACY OF PERFORMANCE CRITERIA FOR UNIVERSITY BUILDING DESIGN AND CONSTRUCTION IS UNDER WAY IN NEW YORK STATE UNDER THE AUSPICES OF THE NEW YORK STATE UNIVERSITY CONSTRUCTION FUND. THE PROGRAM IS TO RESULT IN AN EXTENSIVE LIBRARY OF PERFORMANCE CRITERIA TO AID COMMUNICATION WITH ALL SECTORS OF THE BUILDING…

A dynamic motion simulator for future European docking systems

NASA Technical Reports Server (NTRS)

Brondino, G.; Marchal, PH.; Grimbert, D.; Noirault, P.

1990-01-01

Europe's first confrontation with docking in space will require extensive testing to verify design and performance and to qualify hardware. For this purpose, a Docking Dynamics Test Facility (DDTF) was developed. It allows reproduction on the ground of the same impact loads and relative motion dynamics which would occur in space during docking. It uses a 9 degree of freedom, servo-motion system, controlled by a real time computer, which simulates the docking spacecraft in a zero-g environment. The test technique involves and active loop based on six axis force and torque detection, a mathematical simulation of individual spacecraft dynamics, and a 9 degree of freedom servomotion of which 3 DOFs allow extension of the kinematic range to 5 m. The configuration was checked out by closed loop tests involving spacecraft control models and real sensor hardware. The test facility at present has an extensive configuration that allows evaluation of both proximity control and docking systems. It provides a versatile tool to verify system design, hardware items and performance capabilities in the ongoing HERMES and COLUMBUS programs. The test system is described and its capabilities are summarized.

Selected Test Items in American History. Bulletin Number 6, Fifth Edition.

ERIC Educational Resources Information Center

Anderson, Howard R.; Lindquist, E. F.

Designed for high school students, this bulletin provides an extensive file of 1,062 multiple-choice questions in American history. Taken largely from the Iowa Every-Pupil Program and the Cooperative Test Service standardized examinations, the questions are chronologically divided into 16 topic areas. They include exploration and discovery;…

Electrophoretic separator for purifying biologicals, part 1

NASA Technical Reports Server (NTRS)

Mccreight, L. R.

1978-01-01

A program to develop an engineering model of an electrophoretic separator for purifying biologicals is summarized. An extensive mathematical modeling study and numerous ground based tests were included. Focus was placed on developing an actual electrophoretic separator of the continuous flow type, configured and suitable for flight testing as a space processing applications rocket payload.

78 FR 23884 - Seed Testing Service Program; Request for an Extension of and Revision to a Currently Approved...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-23

... Marketing Service's (AMS) intention to request approval from the Office of Management and Budget (OMB), for... DEPARTMENT OF AGRICULTURE Agricultural Marketing Service [Doc. No. AMS-LS-13-0007] Seed Testing... AGENCY: Agricultural Marketing Service, USDA. ACTION: Request for comments. SUMMARY: In accordance with...

Flight test experience and controlled impact of a remotely piloted jet transport aircraft

NASA Technical Reports Server (NTRS)

Horton, Timothy W.; Kempel, Robert W.

1988-01-01

The Dryden Flight Research Center Facility of NASA Ames Research Center (Ames-Dryden) and the FAA conducted the controlled impact demonstration (CID) program using a large, four-engine, remotely piloted jet transport airplane. Closed-loop primary flight was controlled through the existing onboard PB-20D autopilot which had been modified for the CID program. Uplink commands were sent from a ground-based cockpit and digital computer in conjunction with an up-down telemetry link. These uplink commands were received aboard the airplane and transferred through uplink interface systems to the modified PB-20D autopilot. Both proportional and discrete commands were produced by the ground system. Prior to flight tests, extensive simulation was conducted during the development of ground-based digital control laws. The control laws included primary control, secondary control, and racetrack and final approach guidance. Extensive ground checks were performed on all remotely piloted systems; however, piloted flight tests were the primary method and validation of control law concepts developed from simulation. The design, development, and flight testing of control laws and systems required to accomplish the remotely piloted mission are discussed.

LLNL electro-optical mine detection program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, C.; Aimonetti, W.; Barth, M.

1994-09-30

Under funding from the Advanced Research Projects Agency (ARPA) and the US Marine Corps (USMC), Lawrence Livermore National Laboratory (LLNL) has directed a program aimed at improving detection capabilities against buried mines and munitions. The program has provided a national test facility for buried mines in arid environments, compiled and distributed an extensive data base of infrared (IR), ground penetrating radar (GPR), and other measurements made at that site, served as a host for other organizations wishing to make measurements, made considerable progress in the use of ground penetrating radar for mine detection, and worked on the difficult problem ofmore » sensor fusion as applied to buried mine detection. While the majority of our effort has been concentrated on the buried mine problem, LLNL has worked with the U.S.M.C. on surface mine problems as well, providing data and analysis to support the COBRA (Coastal Battlefield Reconnaissance and Analysis) program. The original aim of the experimental aspect of the program was the utilization of multiband infrared approaches for the detection of buried mines. Later the work was extended to a multisensor investigation, including sensors other than infrared imagers. After an early series of measurements, it was determined that further progress would require a larger test facility in a natural environment, so the Buried Object Test Facility (BOTF) was constructed at the Nevada Test Site. After extensive testing, with sensors spanning the electromagnetic spectrum from the near ultraviolet to radio frequencies, possible paths for improvement were: improved spatial resolution providing better ground texture discrimination; analysis which involves more complicated spatial queueing and filtering; additional IR bands using imaging spectroscopy; the use of additional sensors other than IR and the use of data fusion techniques with multi-sensor data; and utilizing time dependent observables like temperature.« less

Association of lower extremity range of motion and muscle strength with physical performance of community-dwelling older women.

PubMed

Jung, Hungu; Yamasaki, Masahiro

2016-12-08

Reduced lower extremity range of motion (ROM) and muscle strength are related to functional disability in older adults who cannot perform one or more activities of daily living (ADL) independently. The purpose of this study was to determine which factors of seven lower extremity ROMs and two muscle strengths play dominant roles in the physical performance of community-dwelling older women. Ninety-five community-dwelling older women (mean age ± SD, 70.7 ± 4.7 years; age range, 65-83 years) were enrolled in this study. Seven lower extremity ROMs (hip flexion, hip extension, knee flexion, internal and external hip rotation, ankle dorsiflexion, and ankle plantar flexion) and two muscle strengths (knee extension and flexion) were measured. Physical performance tests, including functional reach test (FRT), 5 m gait test, four square step test (FSST), timed up and go test (TUGT), and five times sit-to-stand test (FTSST) were performed. Stepwise regression models for each of the physical performance tests revealed that hip extension ROM and knee flexion strength were important explanatory variables for FRT, FSST, and FTSST. Furthermore, ankle plantar flexion ROM and knee extension strength were significant explanatory variables for the 5 m gait test and TUGT. However, ankle dorsiflexion ROM was a significant explanatory variable for FRT alone. The amount of variance on stepwise multiple regression for the five physical performance tests ranged from 25 (FSST) to 47% (TUGT). Hip extension, ankle dorsiflexion, and ankle plantar flexion ROMs, as well as knee extension and flexion strengths may play primary roles in the physical performance of community-dwelling older women. Further studies should assess whether specific intervention programs targeting older women may achieve improvements in lower extremity ROM and muscle strength, and thereby play an important role in the prevention of dependence on daily activities and loss of physical function, particularly focusing on hip extension, ankle dorsiflexion, and ankle plantar flexion ROMs as well as knee extension and flexion strength.

Space station structures and dynamics test program

NASA Technical Reports Server (NTRS)

Moore, Carleton J.; Townsend, John S.; Ivey, Edward W.

1987-01-01

The design, construction, and operation of a low-Earth orbit space station poses unique challenges for development and implementation of new technology. The technology arises from the special requirement that the station be built and constructed to function in a weightless environment, where static loads are minimal and secondary to system dynamics and control problems. One specific challenge confronting NASA is the development of a dynamics test program for: (1) defining space station design requirements, and (2) identifying the characterizing phenomena affecting the station's design and development. A general definition of the space station dynamic test program, as proposed by MSFC, forms the subject of this report. The test proposal is a comprehensive structural dynamics program to be launched in support of the space station. The test program will help to define the key issues and/or problems inherent to large space structure analysis, design, and testing. Development of a parametric data base and verification of the math models and analytical analysis tools necessary for engineering support of the station's design, construction, and operation provide the impetus for the dynamics test program. The philosophy is to integrate dynamics into the design phase through extensive ground testing and analytical ground simulations of generic systems, prototype elements, and subassemblies. On-orbit testing of the station will also be used to define its capability.

76 FR 24028 - Proposed Data Collections Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... Function Testing Course Approval Program, 29 CFR 1910.1043 (OMB No. 0920-0138)--Extension--The National... Administration's Cotton Dust Standard, 29 CFR 1920.1043, for approving courses to train technicians to perform...

SOFIA: Flying the Telescope

NASA Technical Reports Server (NTRS)

Asher, Troy A.; Cumming, Stephen B.

2012-01-01

The primary focus of this paper is how the flight test team for the Stratospheric Observatory For Infrared Astronomy (SOFIA) re-cast an extensive developmental test program to meet key milestones while simultaneously ensuring safe certification of the airframe and delivery of an operationally relevant platform, ultimately saving the overall program from financial demise. Following a brief introduction to the observatory and what it is designed to do, SOFIAs planned developmental test program is summarized, including analysis and design philosophy, envelope expansion, model validation and airframe certification. How NASA used lessons learned from other aircraft that employed open cavities in flight is explained as well as how and why the chosen design was selected. The approach to aerodynamic analysis, including bare airframe testing, wind tunnel testing, computational fluid dynamics and finite element modeling proved absolutely critical. Despite a solid analytical foundation, many unknowns remained. History provides several examples of disastrous effects on both systems and flight safety if cavity design is not approached properly. For these reasons, an extensive test plan was developed to ensure a safe and thorough build-up for envelope expansion, airframe certification and early science missions. Unfortunately, as is often the case, because of chronic delays in overall program execution, severe schedule and funding pressures were present. If critical milestones were not met, domestic as well as international funding was in serious jeopardy, and the demise of the entire program loomed large. Concentrating on rigorous model validation, the test team challenged certification requirements, increased test efficiency and streamlined engineering analysis. This resulted in the safe reduction of test point count by 72%, meeting all program milestones and a platform that soundly satisfied all operational science requirements. Results from early science missions are shown and a proof of concept mission for which SOFIA was opportunely positioned is showcased. Success on this time-critical mission to observe a rare astronomical event proved the usefulness of an airborne observatory and the value in waiting for the capability provided by SOFIA. Finally, lessons learned in the test program are presented with emphasis on how lessons from previous aircraft and successful test programs were applied to SOFIA. Effective application of these lessons was crucial to the success of the SOFIA flight test program. SOFIA is an international cooperative program between NASA and the German Space Agency, DLR. It is a 2.5 meter (100-inch) telescope mounted in a Boeing 747SP aircraft used for astronomical observations at altitudes above 35,000 feet. SOFIA will accommodate a host of scientific instruments from the international science community and has a planned operational lifespan of more than 20 years.

Fabrication and test of inorganic/organic separators. [for silver zinc batteries

NASA Technical Reports Server (NTRS)

Smatko, J. S.

1974-01-01

Completion of testing and failure analysis of MDC 40 Ahr silver zinc cells containing largely inorganic separators was accomplished. The results showed that the wet stand and cycle life objectives of the silver zinc cell development program were accomplished. Building, testing and failure analysis of two plate cells employing three optimum separators selected on the basis of extensive screening tests, was performed. The best separator material as a result of these tests was doped calcium zirconate.

Carbon-Carbon Nozzle Extension Development in Support of In-Space and Upper-Stage Liquid Rocket Engines

NASA Technical Reports Server (NTRS)

Gradl, Paul R.; Valentine, Peter G.

2017-01-01

Upper stage and in-space liquid rocket engines are optimized for performance through the use of high area ratio nozzles to fully expand combustion gases to low exit pressures, increasing exhaust velocities. Due to the large size of such nozzles, and the related engine performance requirements, carbon-carbon (C-C) composite nozzle extensions are being considered to reduce weight impacts. Currently, the state-of-the-art is represented by the metallic and foreign composite nozzle extensions limited to approximately 2000 degrees F. used on the Atlas V, Delta IV, Falcon 9, and Ariane 5 launch vehicles. NASA and industry partners are working towards advancing the domestic supply chain for C-C composite nozzle extensions. These development efforts are primarily being conducted through the NASA Small Business Innovation Research (SBIR) program in addition to other low level internal research efforts. This has allowed for the initial material development and characterization, subscale hardware fabrication, and completion of hot-fire testing in relevant environments. NASA and industry partners have designed, fabricated and hot-fire tested several subscale domestically produced C-C extensions to advance the material and coatings fabrication technology for use with a variety of liquid rocket and scramjet engines. Testing at NASA's Marshall Space Flight Center (MSFC) evaluated heritage and state-of-the-art C-C materials and coatings, demonstrating the initial capabilities of the high temperature materials and their fabrication methods. This paper discusses the initial material development, design and fabrication of the subscale carbon-carbon nozzle extensions, provides an overview of the test campaign, presents results of the hot fire testing, and discusses potential follow-on development work. The follow on work includes the fabrication of ultra-high temperature materials, larger C-C nozzle extensions, material characterization, sub-element testing and hot-fire testing at larger scale.

College Student Profiles: Norms for the ACT Assessment, 1980-81 Edition.

ERIC Educational Resources Information Center

Sawyer, Richard L.

Extensive normative information are presented on about 455,170 college freshmen entering college in 1979 at 1,099 institutions participating in the American College Testing (ACT) Assessment Program. Norms are provided for males and females on ACT test scores and high school grades by college type, affiliation, and geographic region, and by student…

Defense.gov Special Report: Hispanic Heritage Month

Science.gov Websites

, practice and test their skills in STEM. Name: Coast Guard Lt. Cmdr. Luis Carmona Coast Guard Lt. Cmdr. Luis of the Coast Guard's College Student Pre-Commissioning Initiative program, leveraged his extensive to the U.S. Army Operational Test Command, Fort Hood, Texas, where he served as chief of the Combat

Psychometric Properties and Rater Effects of the Computer Adaptive Test of Functional Cognition for Traumatic Brain Injury

ERIC Educational Resources Information Center

Wen, Pey-Shan

2009-01-01

Individuals with moderate to severe TBI often need extensive rehabilitation. To verify the effectiveness of intervention and design rehabilitation programs that meet individual's needs, precise and efficient outcome measures are crucial. Current assessments for TBI either focus on measuring impairments, such as neuropsychological tests or lack of…

77 FR 60683 - Proposed Extension of Approval of Information Collection; Comment Request-Safety Standard for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-04

.... Docket: For access to the docket to read background documents or comments received, go to http://www...: [email protected] . SUPPLEMENTARY INFORMATION: A. Background In 1979, the Commission issued the Safety... based on a test of each product or upon a reasonable testing program. Section 14(b) of the CPSA...

Research-Practice Linkages in Extension Leadership Development Programs: Focus on Community Leadership Development Programs. A Report.

ERIC Educational Resources Information Center

Vandenberg, Lela; And Others

The Research-Practice Linkages Project sought to identify the knowledge base supporting community leadership development (CLD) programs of the Cooperative Extension Service and to determine linkages between Extension programs and CLD research. A mail questionnaire was completed by 492 Extension staff involved in CLD programs in 18 states and 42…

Apollo Telescope Mount (ATM) gimballed star tracker. [developed for the Skylab program

NASA Technical Reports Server (NTRS)

Lana, J. D.

1974-01-01

Design and development of six gimballed star trackers for Skylab's Apollo Telescope Mount, which performed successfully on all three manned Skylab missions and accumulated a total usage time of approximately 3,500 hours, is described in terms of configurations, materials and construction, qualification testing, performance, and reliability characteristics. A brief program history and design changes incorporated during the life of the program are also discussed. Extensive drawings, block diagrams, and photographs are provided.

An Overview of NPP VIIRS Pre-Launch and On-Orbit Calibration and Characterization

NASA Technical Reports Server (NTRS)

Butler, Jim; Gleason, Jim; Xiong, Jack; Chang, Vincent; Lee, Shih Yan

2011-01-01

NPP Visible Infrared Imaging Radiometer Suite (VIIRS) test program at the instrument and observatory level is complete and has provided an extensive amount of high quality data to enable the assessment of sensor performance.

Survey of veterinary extension in the United States.

PubMed

Sischo, W M; Floyd, J G; McKean, J D; Hueston, W D

1999-11-15

To assess veterinary extension in the United States as perceived by veterinary extension personnel. Cross-sectional survey. Extension veterinarians in the United States. 2 surveys were designed and mailed to extension veterinarians listed by the USDA and the American Association of Extension Veterinarians. 34 states had > or = 1 extension veterinarian. The majority (> 60%) of extension veterinarians did not commit time to resident education and were not involved in research activities. Paradoxically, 23% of responding extension veterinarians did not report extension work. Programs for food animal producers, horse owners, and companion animal owners were provided by 100, 63, and 37% of states, respectively. Continuing education (CE) programs were provided for food animal veterinarians, equine veterinarians, and companion animal veterinarians by 96, 63, and 52% of states, respectively. Challenges facing veterinary extension included limited recognition of veterinary extension activities by universities, lack of university personnel to support CE programs, and decreased support for companion animal extension programs. Extension veterinarians need to identify and clearly articulate the mission of veterinary extension, develop more collaborative programs across regions, and continue to serve as catalysts to bring diverse constituents together. Extension veterinarians must distinguish their mission not solely as information transfer, which can be accomplished in a variety of ways outside of extension, but as a coherent and consistent program of education and policy developed on a national level and distributed locally.

HackaMol: An Object-Oriented Modern Perl Library for Molecular Hacking on Multiple Scales

DOE PAGES

Riccardi, Demian M.; Parks, Jerry M.; Johs, Alexander; ...

2015-03-20

HackaMol is an open source, object-oriented toolkit written in Modern Perl that organizes atoms within molecules and provides chemically intuitive attributes and methods. The library consists of two components: HackaMol, the core that contains classes for storing and manipulating molecular information, and HackaMol::X, the extensions that use the core. We tested the core; it is well-documented and easy to install across computational platforms. Our goal for the extensions is to provide a more flexible space for researchers to develop and share new methods. In this application note, we provide a description of the core classes and two extensions: HackaMol::X::Calculator, anmore » abstract calculator that uses code references to generalize interfaces with external programs, and HackaMol::X::Vina, a structured class that provides an interface with the AutoDock Vina docking program.« less

HackaMol: An Object-Oriented Modern Perl Library for Molecular Hacking on Multiple Scales.

PubMed

Riccardi, Demian; Parks, Jerry M; Johs, Alexander; Smith, Jeremy C

2015-04-27

HackaMol is an open source, object-oriented toolkit written in Modern Perl that organizes atoms within molecules and provides chemically intuitive attributes and methods. The library consists of two components: HackaMol, the core that contains classes for storing and manipulating molecular information, and HackaMol::X, the extensions that use the core. The core is well-tested, well-documented, and easy to install across computational platforms. The goal of the extensions is to provide a more flexible space for researchers to develop and share new methods. In this application note, we provide a description of the core classes and two extensions: HackaMol::X::Calculator, an abstract calculator that uses code references to generalize interfaces with external programs, and HackaMol::X::Vina, a structured class that provides an interface with the AutoDock Vina docking program.

HackaMol: An Object-Oriented Modern Perl Library for Molecular Hacking on Multiple Scales

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riccardi, Demian M.; Parks, Jerry M.; Johs, Alexander

HackaMol is an open source, object-oriented toolkit written in Modern Perl that organizes atoms within molecules and provides chemically intuitive attributes and methods. The library consists of two components: HackaMol, the core that contains classes for storing and manipulating molecular information, and HackaMol::X, the extensions that use the core. We tested the core; it is well-documented and easy to install across computational platforms. Our goal for the extensions is to provide a more flexible space for researchers to develop and share new methods. In this application note, we provide a description of the core classes and two extensions: HackaMol::X::Calculator, anmore » abstract calculator that uses code references to generalize interfaces with external programs, and HackaMol::X::Vina, a structured class that provides an interface with the AutoDock Vina docking program.« less

Exploring Extension Involvement in Farm to School Program Activities

ERIC Educational Resources Information Center

Benson, Matthew C.

2014-01-01

The study reported here examined Extension professionals' involvement in farm-to-school program activities. Results of an online survey distributed to eight state Extension systems indicate that on average, Extension professionals are involved with one farm to school program activity, with most supporting school or community garden programs.…

Suomi-NPP Mission On-Orbit Experience with Toroid Ball Bearing Retainers Under Unidirectional and Reversing Motion

NASA Technical Reports Server (NTRS)

Bruegman, Otto; Thakore, Kamal; Loewenthal, Stu; Cymerman, John

2016-01-01

The Advanced Technology Microwave Sounder (ATMS) instrument scan system on the Suomi National Polar-orbiting Partnership (SNPP) spacecraft has experienced several randomly occurring increased torque 'events' since its on-orbit activation in November 2011. Based on a review of on-orbit telemetry data and data gathered from scan mechanism bearing life testing on the ground, the conclusion was drawn that some degradation of Teflon toroid ball retainers was occurring in the instrument Scan Drive Mechanism. A life extension program was developed and executed on-orbit with very good results to date. The life extension program consisted of reversing the mechanism for a limited number of consecutive scans every day.

Inertial Upper Stage Thermal Test Program

DTIC Science & Technology

1989-04-12

EPDM , a tnermal insuiative rubber material covering the SRM ignitor housing, were made in both convective and radiative heater environments under...N2 to ensure an inert environment for these tests. 11 EPDM RUBBER FIBERGLAS PHENOLIC Fig. 2. IUS SRM-2 ignitor. 12 RADIA TOR EMI SHIELD-,," MOVABLE...testing. EPDM Grafoil seal, Viton Thermal-protection materials , IBSTRACT (Continue on reve4 if necessary and identify by block number) An extensive ther

A Cost-Reduction Strategy for Weapon System Acquisition

DTIC Science & Technology

1990-12-01

quantities, manufacturing processes, and test and evaluation are made. As a result, by milestone I, approximately 60% of the life-cycle costs are already...Assess the results from the potential SDIO application of the CRS and 5 consider further development and testing of the strategy. - Consider a policy that...eliminating activities must be carefully weighed. For example, extensive testing and I program reviews are typically classified as non-value added activities

The extension of the thermal-vacuum test optimization program to multiple flights

NASA Technical Reports Server (NTRS)

Williams, R. E.; Byrd, J.

1981-01-01

The thermal vacuum test optimization model developed to provide an approach to the optimization of a test program based on prediction of flight performance with a single flight option in mind is extended to consider reflight as in space shuttle missions. The concept of 'utility', developed under the name of 'availability', is used to follow performance through the various options encountered when the capabilities of reflight and retrievability of space shuttle are available. Also, a 'lost value' model is modified to produce a measure of the probability of a mission's success, achieving a desired utility using a minimal cost test strategy. The resulting matrix of probabilities and their associated costs provides a means for project management to evaluate various test and reflight strategies.

Extension through Partnerships: Research and Education Center Teams with County Extension to Deliver Programs

ERIC Educational Resources Information Center

Mullahey, J. Jeffrey

2011-01-01

Budget reductions have severely affected resources available to deliver agriculture and natural resource Extension programs in Florida. University of Florida/Institute of Food and Agricultural Sciences delivers Extension programming through a unique partnership between research and education centers and county Extension. Science-based information…

Construction Equipment

NASA Astrophysics Data System (ADS)

1983-01-01

FMC Corporation conducts extensive proof lift tests and computerized analysis to insure that the cranes can lift rated capacity loads up to one million pounds in a wide range of applications. In their analysis work, engineers makes use of a computer program supplied by COSMIC. Called Analysis of Beam Columns, the program is used as part of the required analysis for determining bending moments, deflections and critical load for latticed crane booms.

Commonly Unrecognized Error Variance in Statewide Assessment Programs: Sources of Error Variance and What Can Be Done to Reduce Them

ERIC Educational Resources Information Center

Brockmann, Frank

2011-01-01

State testing programs today are more extensive than ever, and their results are required to serve more purposes and high-stakes decisions than one might have imagined. Assessment results are used to hold schools, districts, and states accountable for student performance and to help guide a multitude of important decisions. This report describes…

The NASA/MSFC global reference atmospheric model: 1990 version (GRAM-90). Part 2: Program/data listings

NASA Technical Reports Server (NTRS)

Justus, C. G.; Alyea, F. N.; Cunnold, D. M.; Jeffries, W. R., III; Johnson, D. L.

1991-01-01

A new (1990) version of the NASA/MSFC Global Reference Atmospheric Model (GRAM-90) was completed and the program and key data base listing are presented. GRAM-90 incorporate extensive new data, mostly collected under the Middle Atmosphere Program, to produce a completely revised middle atmosphere model (20 to 120 km). At altitudes greater than 120 km, GRAM-90 uses the NASA Marshall Engineering Thermosphere model. Complete listings of all program and major data bases are presented. Also, a test case is included.

MSFC crack growth analysis computer program, version 2 (users manual)

NASA Technical Reports Server (NTRS)

Creager, M.

1976-01-01

An updated version of the George C. Marshall Space Flight Center Crack Growth Analysis Program is described. The updated computer program has significantly expanded capabilities over the original one. This increased capability includes an extensive expansion of the library of stress intensity factors, plotting capability, increased design iteration capability, and the capability of performing proof test logic analysis. The technical approaches used within the computer program are presented, and the input and output formats and options are described. Details of the stress intensity equations, example data, and example problems are presented.

High-Throughput Screening in ToxCast/Tox21 (FutureToxII)

EPA Science Inventory

Addressing safety aspects of drugs and environmental chemicals relies extensively on animal testing. However, the quantity of chemicals needing assessment and challenges of species extrapolation require development of alternative approaches. The EPA’s ToxCast program addresses th...

Hydraulic Performance of Set-Back Curb Inlets

DOT National Transportation Integrated Search

1998-06-01

The objective of this study was to develop hydraulic design charts for the location and sizing of set-back curb inlets. An extensive program of hydraulic model testing was conducted to evaluate the performance of various inlet opening sizes. The grad...

Solid Propulsion Systems, Subsystems, and Components Service Life Extension

NASA Technical Reports Server (NTRS)

Hundley, Nedra H.; Jones, Connor

2011-01-01

The service life extension of solid propulsion systems, subsystems, and components will be discussed based on the service life extension of the Space Transportation System Reusable Solid Rocket Motor (RSRM) and Booster Separation Motors (BSM). The RSRM is certified for an age life of five years. In the aftermath of the Columbia accident there were a number of motors that were approaching the end of their five year service life certification. The RSRM Project initiated an assessment to determine if the service life of these motors could be extended. With the advent of the Constellation Program, a flight test was proposed that would utilize one of the RSRMs which had been returned from the launch site due to the expiration of its five year service life certification and twelve surplus Chemical Systems Division BSMs which had exceeded their eight year service life. The RSRM age life tracking philosophy which establishes when the clock starts for age life tracking will be described. The role of the following activities in service life extension will be discussed: subscale testing, accelerated aging, dissecting full scale aged hardware, static testing full scale aged motors, data mining industry data, and using the fleet leader approach. The service life certification and extension of the BSMs will also be presented.

The calibration and flight test performance of the space shuttle orbiter air data system

NASA Technical Reports Server (NTRS)

Dean, A. S.; Mena, A. L.

1983-01-01

The Space Shuttle air data system (ADS) is used by the guidance, navigation and control system (GN&C) to guide the vehicle to a safe landing. In addition, postflight aerodynamic analysis requires a precise knowledge of flight conditions. Since the orbiter is essentially an unpowered vehicle, the conventional methods of obtaining the ADS calibration were not available; therefore, the calibration was derived using a unique and extensive wind tunnel test program. This test program included subsonic tests with a 0.36-scale orbiter model, transonic and supersonic tests with a smaller 0.2-scale model, and numerous ADS probe-alone tests. The wind tunnel calibration was further refined with subsonic results from the approach and landing test (ALT) program, thus producing the ADS calibration for the orbital flight test (OFT) program. The calibration of the Space Shuttle ADS and its performance during flight are discussed in this paper. A brief description of the system is followed by a discussion of the calibration methodology, and then by a review of the wind tunnel and flight test programs. Finally, the flight results are presented, including an evaluation of the system performance for on-board systems use and a description of the calibration refinements developed to provide the best possible air data for postflight analysis work.

Characteristics, Views Held of Agricultural Extension Activities, and Communication Behavior of Hsien Extension Supervisors in Taiwan.

ERIC Educational Resources Information Center

Hong, Pi-Feng

Government agencies in Taiwan have carried out agricultural extension programs since 1910, with the assistance of Farmers' Associations. Programs have been expanded since 1953, and now include both general extension (subsidy programs) and educational extension. Comparison of personal characteristics of hsien (county) Farmers' Association…

Discerning Trends in Performance Across Multiple Events

NASA Technical Reports Server (NTRS)

Slater, Simon; Hiltz, Mike; Rice, Craig

2006-01-01

Mass Data is a computer program that enables rapid, easy discernment of trends in performance data across multiple flights and ground tests. The program can perform Fourier analysis and other functions for the purposes of frequency analysis and trending of all variables. These functions facilitate identification of past use of diagnosed systems and of anomalies in such systems, and enable rapid assessment of related current problems. Many variables, for computation of which it is usually necessary to perform extensive manual manipulation of raw downlist data, are automatically computed and made available to all users, regularly eliminating the need for what would otherwise be an extensive amount of engineering analysis. Data from flight, ground test, and simulation are preprocessed and stored in one central location for instantaneous access and comparison for diagnostic and trending purposes. Rules are created so that an event log is created for every flight, making it easy to locate information on similar maneuvers across many flights. The same rules can be created for test sets and simulations, and are searchable, so that information on like events is easily accessible.

Environmental sciences information storage and retrieval system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engstrom, D.E.; White, M.G.; Dunaway, P.B.

Reynolds Electrical and Engineering Co., Inc. (REECo), has since 1970 accumulated information relating to the AEC's Nevada Applied Ecology Group (NAEG) programs at the Nevada Test Site (NTS). These programs, involving extensive soil, vegetation, and small-animal studies, have generated informational data concerning the collecting, processing, analyzing, and shipping of sample materials to various program participants and contractors. Future plans include incorporation of Lawrence Livermore Laboratory's resuspension study data, REECo's on-site air data, and EPA's large-animal, off-site air, and off-site soil data. (auth)

Capability and flight record of the versatile space shuttle OMS engine

NASA Astrophysics Data System (ADS)

Judd, D. Craig

The development contract for Aerojet's Orbital Manuevering Subsystem (OMS) engine was awarded in February 1974. This paper provides a description of the OMS subcomponents along with a summary of the OMS development program and subsequent flight record. The major subcomponents include the platelet injector, regeneratively cooled chamber, radiation cooled nozzle extension, bipropellant valve, thrust mount, gimbal actuator assembly, and propellant feedlines. The OMS engine underwent an extensive development program between 1974 and 1978 that included approximately 3680 tests performed on 21 separate engines on components for a total duration of more than 19,000 seconds. This was followed with qualification testing of two engines with another 521 tests and 18,504 seconds of hot fire testing. The Space Shuttle system has completed 45 orbital flights with the OMS engines having fired a total of 356 times with a cumulative duration of 38,094 seconds. In all cases, the OMS engine has performed as required because of its maturity, simplicity, and built-in redundancy. Also described are the results of studies performed to increase the performance of the OMS engine either by using LOX/hydrocarbon propellants or by converting to a pump fed system to increase chamber pressure and area ratio.

Command system output bit verification

NASA Technical Reports Server (NTRS)

Odd, C. W.; Abbate, S. F.

1981-01-01

An automatic test was developed to test the ability of the deep space station (DSS) command subsystem and exciter to generate and radiate, from the exciter, the correct idle bit sequence for a given flight project or to store and radiate received command data elements and files without alteration. This test, called the command system output bit verification test, is an extension of the command system performance test (SPT) and can be selected as an SPT option. The test compares the bit stream radiated from the DSS exciter with reference sequences generated by the SPT software program. The command subsystem and exciter are verified when the bit stream and reference sequences are identical. It is a key element of the acceptance testing conducted on the command processor assembly (CPA) operational program (DMC-0584-OP-G) prior to its transfer from development to operations.

Blade loss transient dynamics analysis, volume 2. Task 2: Theoretical and analytical development. Task 3: Experimental verification

NASA Technical Reports Server (NTRS)

Gallardo, V. C.; Storace, A. S.; Gaffney, E. F.; Bach, L. J.; Stallone, M. J.

1981-01-01

The component element method was used to develop a transient dynamic analysis computer program which is essentially based on modal synthesis combined with a central, finite difference, numerical integration scheme. The methodology leads to a modular or building-block technique that is amenable to computer programming. To verify the analytical method, turbine engine transient response analysis (TETRA), was applied to two blade-out test vehicles that had been previously instrumented and tested. Comparison of the time dependent test data with those predicted by TETRA led to recommendations for refinement or extension of the analytical method to improve its accuracy and overcome its shortcomings. The development of working equations, their discretization, numerical solution scheme, the modular concept of engine modelling, the program logical structure and some illustrated results are discussed. The blade-loss test vehicles (rig full engine), the type of measured data, and the engine structural model are described.

Influence of precracked specimen configuration and starting stress intensity on the stress corrosion cracking of 4340 steel

NASA Technical Reports Server (NTRS)

Lisagor, W. B.

1984-01-01

Since the pioneer work of Brown (1966), precracked specimens and related fracture mechanics analyses have been extensively used to study stress corrosion cracking. Certain questions arose in connection with initial attempts to prepare standardized recommended practices by ASTM Committee G-1 on Corrosion of Metals. These questions were related to adequacy of test control as it pertains to acceptable limits of variability, and to validity of expressions for stress intensity and crack-surface displacements for both specimen configurations. An interlaboratory test program, was, therefore, planned with the objective to examine the validity of KIscc testing for selected specimen configurations, materials,and environmental systems. The results reported in the present paper include details of a single laboratory test program. The program was conducted to determine if the threshold value of stress intensity for onset and arrest of stress corrosion cracking was independent for the two specimen configurations examined.

The Boeing 747 fatigue integrity program

NASA Technical Reports Server (NTRS)

Spencer, M. M.

1972-01-01

The fatigue integrity program which was established to insure economic operations and to provide foundation data for inspection and maintenance is discussed. Significant features of the 747 fatigue integrity program are: (1) fatigue analyses which are continually updated to reflect design changes, fatigue test results, and static and flight load survey measurements; (2) material selection and detail design by using initial fatigue analyses, service experience, and testing; and (3) fatigue testing to check detail design quality and to verify the analyses, culminated by the test of a structurally complete airframe. Fatigue stress analyses were performed with the aid of experimental as well as analytical procedures. Extensive application was made of the stress severity factor, developed at Boeing, for evaluating peak stresses in complex joints. A frame of reference was established by families of structural fatigue performance curves (S-N curves) encompassing the range of materials and fatigue qualities anticipated for the 747 airplane design.

Effects of a 16-week Pilates exercises training program for isometric trunk extension and flexion strength.

PubMed

Kliziene, Irina; Sipaviciene, Saule; Vilkiene, Jovita; Astrauskiene, Audrone; Cibulskas, Gintautas; Klizas, Sarunas; Cizauskas, Ginas

2017-01-01

To evaluate the effects of Pilates exercises designed to improve isometric trunk extension and flexion strength of muscles in women with chronic low back pain (cLBP). Female volunteers with cLBP were divided into an experimental group (EG; n = 27) and a control group (CG; n = 27). Pilates exercises were performed twice per week by the EG; the duration of each session was 60 min. The program lasted for 16 weeks; thus patients underwent a total of 32 exercise sessions. The maximum isometric waist bending strength of the EG had improved significantly (p = 0.001) after 16 weeks of the Pilates program. The results of trunk flexion muscle endurance tests significantly depended on the trunk extension muscle endurance before the intervention, and at 1 month (r = 0.723, p < 0.001) and 2 months (r = 0.779, p < 0.001) after the Pilates exercise program. At the end of the 16-week exercise program, cLBP intensity decreased by 2.01 ± 0.8 (p < 0.05) in the EG, and this reduction persisted for 1 month after completion of the program. At 1 and 2 months after cessation of the Pilates exercise program the pain intensified and the functional state deteriorated much faster than the maximum trunk muscle strength. Therefore, it can be concluded that, to decrease pain and improve functional condition, regular exercise (and not only improved strength and endurance) is required. We established that, although the 16-week lumbar stabilization exercise program increased isometric trunk extension and flexion strength and this increase in strength persisted for 2 months, decreased LBP and improved functional condition endured for only 1 month. Copyright © 2016 Elsevier Ltd. All rights reserved.

Fuel cell technology program

NASA Technical Reports Server (NTRS)

1971-01-01

The results of a solid polymer electrolyte fuel cell development program are summarized. A base line design was defined, and materials and components of the base line configuration were fabricated and tested. Concepts representing base line capability extensions in the areas of life, power, specific weight and volume, versatility of operation, field maintenance, and thermal control were identified and evaluated. Liaison and coordination with space shuttle contractors resulted in the exchange of engineering data.

Comparing nutrition programs conducted by public health and Cooperative Extension personnel.

PubMed

Brown, J L; Adams, P A; Kaltreider, D L; Sims, L S

1990-01-01

We surveyed 218 county extension agents, 75 state extension specialists, 163 public health nutritionists, and 87 public health administrators in 16 states to compare the nutrition program characteristics of extension personnel with public health personnel. Public health personnel were most strongly influenced by funding regulations--more than 80% of public health nutritionists cited infant/preschool nutrition and nutrition for pregnant/lactating women as program topics. About half of the extension agents listed food preservation and preparation as the dominant topics provided. Public health personnel most frequently designed programs for pregnant and lactating women and low-income clientele; 91% of the nutritionists ranked one-to-one counseling as one of their three most important delivery methods. Extension personnel designed programs more often for homemakers/adults and youth and ranked a combination of group and media delivery methods as most important. Public health personnel use anthropometric measures and food intake records to evaluate their programs; extension personnel use written questionnaires and program records. More than 50% of the nutritionists ranked improving the health of their clients as one of the three most important impacts of their programs; more than 50% of the extension agents ranked increasing knowledge and improving skills as their most important impacts.

76 FR 12073 - Extension of Web-Based TRICARE Assistance Program Demonstration Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... DEPARTMENT OF DEFENSE Office of the Secretary Extension of Web-Based TRICARE Assistance Program Demonstration Program AGENCY: Department of Defense. ACTION: Notice of a Two Year Extension of the Web-Based..., entitled Web-Based TRICARE Assistance Program. This demonstration was effective August 1, 2009, as...

Urban Extension's New Nontraditional Offering: Parent-Child Reading Enhancement Program

ERIC Educational Resources Information Center

Brandon, Dorothy P.; Tsamaase, Marea; Humphrey, Ronnie; Crenshaw, Kevin

2018-01-01

Urbanization is causing a major shift in Extension's programming throughout the United States. We present results of a nontraditional urban program (the Parent-Child Reading Enhancement Program) that is being implemented by Alabama Cooperative Extension System's Urban Affairs and New Nontraditional Programs unit. Findings suggest that this…

1970-1971 Annual Report: Extension Service Program, Silliman University.

ERIC Educational Resources Information Center

Maturan, Eulalio G.

The 1970-1971 annual report of the Extension Service Program of Silliman University, Dumaguete City, Philippines, treats the following projects: Mabinay Agricultural Extension, Mabinay Negrito Action-Research, Reforestation, and Livestock Dispersal. Also discussed are the Rural Publications Center and other extension services--a radio program,…

A resistive magnetohydrodynamics solver using modern C++ and the Boost library

NASA Astrophysics Data System (ADS)

Einkemmer, Lukas

2016-09-01

In this paper we describe the implementation of our C++ resistive magnetohydrodynamics solver. The framework developed facilitates the separation of the code implementing the specific numerical method and the physical model from the handling of boundary conditions and the management of the computational domain. In particular, this will allow us to use finite difference stencils which are only defined in the interior of the domain (the boundary conditions are handled automatically). We will discuss this and other design considerations and their impact on performance in some detail. In addition, we provide a documentation of the code developed and demonstrate that a performance comparable to Fortran can be achieved, while still maintaining a maximum of code readability and extensibility. Catalogue identifier: AFAH_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AFAH_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 592774 No. of bytes in distributed program, including test data, etc.: 43771395 Distribution format: tar.gz Programming language: C++03. Computer: PC, HPC systems. Operating system: POSIX compatible (extensively tested on various Linux systems). In fact only the timing class requires POSIX routines; all other parts of the program can be run on any system where a C++ compiler, Boost, CVODE, and an implementation of BLAS are available. RAM: Hundredths of Kilobytes to Gigabytes (depending on the problem size) Classification: 19.10, 4.3. External routines: Boost, CVODE, either a BLAS library or Intel MKL Nature of problem: An approximate solution to the equations of resistive magnetohydrodynamics for a given initial value and given boundary conditions is computed. Solution method: The discretization is performed using a finite difference approximation in space and the CVODE library in time (which employs a scheme based on the backward differentiation formulas). Restrictions: We consider the 2.5 dimensional case; that is, the magnetic field and the velocity field are three dimensional but all quantities depend only on x and y (but not z). Unusual features: We provide an implementation in C++ using the Boost library that combines high level techniques (which greatly increases code maintainability and extensibility) with performance that is comparable to Fortran implementations. Running time: From seconds to weeks (depending on the problem size).

Down-selection of candidate alloys for further testing of advanced replacement materials for LWR core internals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Was, Gary; Leonard, Keith J.; Tan, Lizhen

Life extension of the existing nuclear reactors imposes irradiation of high fluences to structural materials, resulting in significant challenges to the traditional reactor materials such as type 304 and 316 stainless steels. Advanced alloys with superior radiation resistance will increase safety margins, design flexibility, and economics for not only the life extension of the existing fleet but also new builds with advanced reactor designs. The Electric Power Research Institute (EPRI) teamed up with Department of Energy (DOE) Light Water Reactor Sustainability Program to initiate the Advanced Radiation Resistant Materials (ARRM) program, aiming to identify and develop advanced alloys with superiormore » degradation resistance in light water reactor (LWR)-relevant environments by 2024.« less

Solid amine development program

NASA Technical Reports Server (NTRS)

Lovell, J. S.

1973-01-01

A regenerable solid amine material to perform the functions of humidity control and CO2 removal for space shuttle type vehicle is reported. Both small scale and large scale testing have shown this material to be competitive, especially for the longer shuttle missions. However, it had been observed that the material off-gasses ammonia under certain conditions. This presents two concerns. The first, that the ammonia would contaminate the cabin atmosphere, and second, that the material is degrading with time. An extensive test program has shown HS-C to produce only trace quantities of atmospheric contaminants, and under normal extremes, to have no practical life limitation.

Testing the electroweak phase transition in scalar extension models at lepton colliders

NASA Astrophysics Data System (ADS)

Cao, Qing-Hong; Huang, Fa-Peng; Xie, Ke-Pan; Zhang, Xinmin

2018-01-01

We study the electroweak phase transition in three scalar extension models beyond the Standard Model. Assuming new scalars are decoupled at some heavy scale, we use the covariant derivative expansion method to derive all of the dimension-6 effective operators, whose coefficients are highly correlated in a specific model. We provide bounds to the complete set of dimension-6 operators by including the electroweak precision test and recent Higgs measurements. We find that the parameter space of strong first-order phase transitions (induced by the | H{| }6 operator) can be probed extensively in Zh production at future electron-positron colliders. QHC and KPX are supported in part by the National Science Foundation of China(11175069, 11275009, 11422545), XZ and FPH are supported by the NSFC (11121092, 11033005, 11375202) and also by the CAS Pilot-B program. FPH is also supported by the China Postdoctoral Science Foundation (2016M590133, 2017T100108)

Development of a modal emissions model using data from the Cooperative Industry/Government Exhaust Emission test program

DOT National Transportation Integrated Search

2003-06-22

The Environmental Protection Agencys (EPAs) recommended model, MOBILE5a, has been : used extensively to predict emission factors based on average speeds for each fleet type. : Because average speeds are not appropriate in modeling intersections...

U.S. Department of Energy's initiatives for proliferation prevention program: solidification technologies for radioactive waste treatment in Russia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pokhitonov, Y.; Kelley, D.

Large amounts of liquid radioactive waste have existed in the U.S. and Russia since the 1950's as a result of the Cold War. Comprehensive action to treat and dispose of waste products has been lacking due to insufficient funding, ineffective technologies or no proven technologies, low priority by governments among others. Today the U.S. and Russian governments seek new, more reliable methods to treat liquid waste, in particular the legacy waste streams. A primary objective of waste generators and regulators is to find economical and proven technologies that can provide long-term stability for repository storage. In 2001, the V.G. Khlopinmore » Radium Institute (Khlopin), St. Petersburg, Russia, and Pacific Nuclear Solutions (PNS), Indianapolis, Indiana, began extensive research and test programs to determine the validity of polymer technology for the absorption and immobilization of standard and complex waste streams. Over 60 liquid compositions have been tested including extensive irradiation tests to verify polymer stability and possible degradation. With conclusive scientific evidence of the polymer's effectiveness in treating liquid waste, both parties have decided to enter the Russian market and offer the solidification technology to nuclear sites for waste treatment and disposal. In conjunction with these efforts, the U.S. Department of Energy (DOE) will join Khlopin and PNS to explore opportunities for direct application of the polymers at predetermined sites and to conduct research for new product development. Under DOE's 'Initiatives for Proliferation Prevention'(IPP) program, funding will be provided to the Russian participants over a three year period to implement the program plan. This paper will present details of U.S. DOE's IPP program, the project structure and its objectives both short and long-term, training programs for scientists, polymer tests and applications for LLW, ILW and HLW, and new product development initiatives. (authors)« less

Experiential Learning for Extension Professionals: A Cross-Cultural Immersion Program

ERIC Educational Resources Information Center

Daniel, Jenna B.; Duncan, Dennis; Navarro, Maria; Fuhrman, Nick

2014-01-01

As the U.S. population becomes more diverse, Extension is called upon to modify its programming to meet the needs of its changing constituency. Georgia Extension created a professional development curriculum to assist Extension professionals in crafting effective programming for the rapidly growing Latino population. The study reported here…

Testing of candidate waste-package backfill and canister materials for basalt

NASA Astrophysics Data System (ADS)

Wood, M. I.; Anderson, W. J.; Aden, G. D.

1982-09-01

The Basalt Waste Isolation Project (BWIP) is developing a multiple-barrier waste package to contain high-level nuclear waste as part of an overall system (e.g., waste package, repository sealing system, and host rock) designed to isolate the waste in a repository located in basalt beneath the Hanford Site, Richland, Washington. The three basic components of the waste package are the waste form, the canister, and the backfill. An extensive testing program is under way to determine the chemical, physical, and mechanical properties of potential canister and backfill materials. The data derived from this testing program will be used to recommend those materials that most adequately perform the functions assigned to the canister and backfill.

Design and implementation of a scene-dependent dynamically selfadaptable wavefront coding imaging system

NASA Astrophysics Data System (ADS)

Carles, Guillem; Ferran, Carme; Carnicer, Artur; Bosch, Salvador

2012-01-01

A computational imaging system based on wavefront coding is presented. Wavefront coding provides an extension of the depth-of-field at the expense of a slight reduction of image quality. This trade-off results from the amount of coding used. By using spatial light modulators, a flexible coding is achieved which permits it to be increased or decreased as needed. In this paper a computational method is proposed for evaluating the output of a wavefront coding imaging system equipped with a spatial light modulator, with the aim of thus making it possible to implement the most suitable coding strength for a given scene. This is achieved in an unsupervised manner, thus the whole system acts as a dynamically selfadaptable imaging system. The program presented here controls the spatial light modulator and the camera, and also processes the images in a synchronised way in order to implement the dynamic system in real time. A prototype of the system was implemented in the laboratory and illustrative examples of the performance are reported in this paper. Program summaryProgram title: DynWFC (Dynamic WaveFront Coding) Catalogue identifier: AEKC_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEKC_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 10 483 No. of bytes in distributed program, including test data, etc.: 2 437 713 Distribution format: tar.gz Programming language: Labview 8.5 and NI Vision and MinGW C Compiler Computer: Tested on PC Intel ® Pentium ® Operating system: Tested on Windows XP Classification: 18 Nature of problem: The program implements an enhanced wavefront coding imaging system able to adapt the degree of coding to the requirements of a specific scene. The program controls the acquisition by a camera, the display of a spatial light modulator and the image processing operations synchronously. The spatial light modulator is used to implement the phase mask with flexibility given the trade-off between depth-of-field extension and image quality achieved. The action of the program is to evaluate the depth-of-field requirements of the specific scene and subsequently control the coding established by the spatial light modulator, in real time.

Designing Studies of Extension Program Results: A Resource for Program Leaders and Specialists. Volume II--Abstracts.

ERIC Educational Resources Information Center

Rivera, William M., Ed.; And Others

These abstracts of 42 studies of extension program results, which make up the second volume of a two-volume resource, are intended to advise state administrative program leaders and others with program evaluation responsibilities of how to design studies of cooperative extension programs. Designed to support volume I, which refers to these…

Examining Extension's Capacity in Community Resource and Economic Development: Viewpoints of Extension Administrators on the Role of Community Resource and Economic Development in the Extension Portfolio

ERIC Educational Resources Information Center

Urbanowitz, Seth C.; Wilcox, Michael D., Jr.

2013-01-01

The survey-based research reported here offers insights on community, resource, and economic development (CRED) Extension programming at the national and regional level. The results present a national picture of CRED programming, research, and potential future programming opportunities that Extension could capitalize on. The research shows that…

Plato: A localised orbital based density functional theory code

NASA Astrophysics Data System (ADS)

Kenny, S. D.; Horsfield, A. P.

2009-12-01

The Plato package allows both orthogonal and non-orthogonal tight-binding as well as density functional theory (DFT) calculations to be performed within a single framework. The package also provides extensive tools for analysing the results of simulations as well as a number of tools for creating input files. The code is based upon the ideas first discussed in Sankey and Niklewski (1989) [1] with extensions to allow high-quality DFT calculations to be performed. DFT calculations can utilise either the local density approximation or the generalised gradient approximation. Basis sets from minimal basis through to ones containing multiple radial functions per angular momenta and polarisation functions can be used. Illustrations of how the package has been employed are given along with instructions for its utilisation. Program summaryProgram title: Plato Catalogue identifier: AEFC_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEFC_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 219 974 No. of bytes in distributed program, including test data, etc.: 1 821 493 Distribution format: tar.gz Programming language: C/MPI and PERL Computer: Apple Macintosh, PC, Unix machines Operating system: Unix, Linux and Mac OS X Has the code been vectorised or parallelised?: Yes, up to 256 processors tested RAM: Up to 2 Gbytes per processor Classification: 7.3 External routines: LAPACK, BLAS and optionally ScaLAPACK, BLACS, PBLAS, FFTW Nature of problem: Density functional theory study of electronic structure and total energies of molecules, crystals and surfaces. Solution method: Localised orbital based density functional theory. Restrictions: Tight-binding and density functional theory only, no exact exchange. Unusual features: Both atom centred and uniform meshes available. Can deal with arbitrary angular momenta for orbitals, whilst still retaining Slater-Koster tables for accuracy. Running time: Test cases will run in a few minutes, large calculations may run for several days.

Tennessee's Extension Food and Nutrition Education Program.

ERIC Educational Resources Information Center

Tennessee Univ., Knoxville. Agricultural Extension Service.

The Extension Food and Nutrition Education program was set up by the University of Tennessee Agricultural Extension Service to assist low-income families in improving their diets. Carrying out the program on a one-to-one basis are 365 assistants who are taught the basics of nutrition by trained home economics extension agents. These assistants…

The Impacts of the Great Recession on State Natural Resource Extension Programs

ERIC Educational Resources Information Center

Serenari, Christopher; Peterson, M. Nils; Bardon, Robert E.; Brown, Robert D.

2013-01-01

The Great Recession contributed to major budget cuts for natural resource Extension programs in the United States. Despite the potentially large cuts, their impacts and how Extension has adapted their programs have not been evaluated. We begin addressing these needs with surveys of Association of Natural Resource Extension Professionals members…

USAF Summer Research Program - 1993 Summer Research Extension Program Final Reports, Volume 2, Phillips Laboratory

DTIC Science & Technology

1994-11-01

Research Extension Program Phillips Laboratory Kirtland Air Force Base Sponsored by: Air Force Office of Scientific Research Boiling Air Force Base...Program Phillips Laboratory Sponsored by: Air Force Office of Scientific Research Bolling Air Force Base, Washington, D.C. and Arkansas Tech University...Summer Research Extension Program (SREP) Phillips

Major advances in extension education programs in dairy production.

PubMed

Chase, L E; Ely, L O; Hutjens, M F

2006-04-01

The dairy industry has seen structural changes in the last 25 yr that have an impact on extension programming. The number of cows in the United States has decreased by 17%, whereas the number of dairy farms has decreased by 74%. The average milk production per cow has increased from 5,394 to 8,599 kg/lactation. Even though there are fewer farms, dairy farm managers are asking for more specific and targeted information. The extension resources available have also decreased during this period. Because of these changes, shifts have taken place in extension programming and staffing. A key change has been a shift to subject matter-targeted programs and workshops. Extension has also incorporated and expanded use of the Internet. Discussion groups, subject matter courses, and searchable databases are examples of Internet use. There will be continuing shifts in the demographics of the US dairy industry that will influence future extension efforts. It is also probable that fewer extension professionals will be available to provide programming due to changes in funding sources at national, state, and local levels. Future shifts in extension programming will be needed to provide the information needs of the industry with a smaller number of extension workers.

Open-Access Physical Activity Programs for Older Adults: A Pragmatic and Systematic Review.

PubMed

Balis, Laura E; Strayer, Thomas; Ramalingam, NithyaPriya; Wilson, Meghan; Harden, Samantha M

2018-01-10

Open-access, community-based programs are recommended to assist older adults in meeting physical activity guidelines, but the characteristics, impact, and scalability of these programs is less understood. The Land-Grant University Cooperative Extension System, an organization providing education through county-based educators, functions as a delivery system for these programs. A systematic review was conducted to determine characteristics of effective older adult physical activity programs and the extent to which programs delivered in Extension employ these characteristics. A systematic review of peer-reviewed and grey literature was conducted from August 2016 to February 2017. The review was limited to open-access (available to all), community-based physical activity interventions for older adults (≥65 years of age). The peer-reviewed literature search was conducted in PubMed and EBSCOhost; the grey literature search for Extension interventions was conducted through Extension websites, Land-Grant Impacts, and the Journal of Extension. Sixteen peer-reviewed studies and 17 grey literature sources met inclusion criteria and were analyzed. Peer-reviewed and Extension programs were similar in their limited use of behavioral theories and group-based strategies. Compared to Extension programs, those in the peer-reviewed literature were more likely to use a combination of physical activity components and be delivered by trained professionals. The results indicate notable differences between peer-reviewed literature and Extension programs and present an opportunity for Extension programs to more effectively use evidence-based program characteristics, including behavioral theories and group dynamics, a combination of physical activity components, and educator/agent-trained delivery agents. © The Author(s) 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Evidence-Based Programming within Cooperative Extension: How Can We Maintain Program Fidelity While Adapting to Meet Local Needs?

ERIC Educational Resources Information Center

Olson, Jonathan R.; Welsh, Janet A.; Perkins, Daniel F.

2015-01-01

In this article, we describe how the recent movement towards evidence-based programming has impacted Extension. We review how the emphasis on implementing such programs with strict fidelity to an underlying program model may be at odds with Extension's strong history of adapting programming to meet the unique needs of children, youth, families,…

Iterative refinement of structure-based sequence alignments by Seed Extension

PubMed Central

Kim, Changhoon; Tai, Chin-Hsien; Lee, Byungkook

2009-01-01

Background Accurate sequence alignment is required in many bioinformatics applications but, when sequence similarity is low, it is difficult to obtain accurate alignments based on sequence similarity alone. The accuracy improves when the structures are available, but current structure-based sequence alignment procedures still mis-align substantial numbers of residues. In order to correct such errors, we previously explored the possibility of replacing the residue-based dynamic programming algorithm in structure alignment procedures with the Seed Extension algorithm, which does not use a gap penalty. Here, we describe a new procedure called RSE (Refinement with Seed Extension) that iteratively refines a structure-based sequence alignment. Results RSE uses SE (Seed Extension) in its core, which is an algorithm that we reported recently for obtaining a sequence alignment from two superimposed structures. The RSE procedure was evaluated by comparing the correctly aligned fractions of residues before and after the refinement of the structure-based sequence alignments produced by popular programs. CE, DaliLite, FAST, LOCK2, MATRAS, MATT, TM-align, SHEBA and VAST were included in this analysis and the NCBI's CDD root node set was used as the reference alignments. RSE improved the average accuracy of sequence alignments for all programs tested when no shift error was allowed. The amount of improvement varied depending on the program. The average improvements were small for DaliLite and MATRAS but about 5% for CE and VAST. More substantial improvements have been seen in many individual cases. The additional computation times required for the refinements were negligible compared to the times taken by the structure alignment programs. Conclusion RSE is a computationally inexpensive way of improving the accuracy of a structure-based sequence alignment. It can be used as a standalone procedure following a regular structure-based sequence alignment or to replace the traditional iterative refinement procedures based on residue-level dynamic programming algorithm in many structure alignment programs. PMID:19589133

Performance of lap splices in large-scale column specimens affected by ASR and/or DEF-extension phase.

DOT National Transportation Integrated Search

2015-03-01

A large experimental program, consisting of the design, construction, curing, exposure, and structural load : testing of 16 large-scale column specimens with a critical lap splice region that were influenced by varying : stages of alkali-silica react...

Recommended Experimental Procedures for Evaluation of Abrupt Wing Stall Characteristics

NASA Technical Reports Server (NTRS)

Capone, F. J.; Hall, R. M.; Owens, D. B.; Lamar, J. E.; McMillin, S. N.

2003-01-01

This paper presents a review of the experimental program under the Abrupt Wing Stall (AWS) Program. Candidate figures of merit from conventional static tunnel tests are summarized and correlated with data obtained in unique free-to-roll tests. Where possible, free-to-roll results are also correlated with flight data. Based on extensive studies of static experimental figures of merit in the Abrupt Wing Stall Program for four different aircraft configurations, no one specific figure of merit consistently flagged a warning of potential lateral activity when actual activity was seen to occur in the free-to-roll experiments. However, these studies pointed out the importance of measuring and recording the root mean square signals of the force balance.

Making the Case for Demographic Data in Extension Programming

ERIC Educational Resources Information Center

Curtis, Katherine J.; Verdoff, Daniel; Rizzo, Bill; Beaudoin, James

2012-01-01

Understanding one's community is essential for effective Extension programming across all program areas. The use of current and reliable demographic data is crucial for Extension to develop effective education and programming to track change and to uncover hidden community characteristics. We discuss what demographic data are, present…

Tools for Formative Evaluation: Gathering the Information Necessary for Program Improvement

ERIC Educational Resources Information Center

Jayaratne, K. S. U.

2016-01-01

New Extension educators experience a steep learning curve when attempting to develop effective Extension programs. Formative evaluation is helpful to new, and experienced, Extension educators in determining the changes necessary for making programs more effective. Formative evaluation is an essential part of program evaluation. However, its use…

Fifteen-foot diameter modular space station Kennedy Space Center launch site support definition (space station program Phase B extension definition)

NASA Technical Reports Server (NTRS)

Bjorn, L. C.; Martin, M. L.; Murphy, C. W.; Niebla, J. F., V

1971-01-01

This document defines the facilities, equipment, and operational plans required to support the MSS Program at KSC. Included is an analysis of KSC operations, a definition of flow plans, facility utilization and modifications, test plans and concepts, activation, and tradeoff studies. Existing GSE and facilities that have a potential utilization are identified, and new items are defined where possible. The study concludes that the existing facilities are suitable for use in the space station program without major modification from the Saturn-Apollo configuration.

Postural control in elderly persons with osteoporosis: Efficacy of an intervention program to improve balance and muscle strength: a randomized controlled trial.

PubMed

Burke, Thomaz Nogueira; França, Fábio Jorge Renovato; Ferreira de Meneses, Sarah Rúbia; Cardoso, Viviam Inhasz; Marques, Amélia Pasqual

2010-07-01

To assess the efficacy of an exercise program aiming to improve balance and muscular strength, for postural control and muscular strength of women with osteoporosis. Sample consisted of 33 women with osteoporosis, randomized into one of two groups: intervention group, in which exercises for balance and improvement of muscular strength of the inferior members were performed for 8 wks (n = 17, age 72.8 +/- 3.6 yrs); control group, which was women not practicing exercises (n = 16, age 74.4 +/- 3.7 yrs). At baseline and after 8 wks of treatment, postural control was assessed using a force plate (Balance Master, Neurocom), and muscular strength during ankle dorsiflexion, knee extension, and flexion was assessed by dynamometry. Adherence to the program was 82%. When compared with the control group, individuals in the intervention group significantly improved the center of pressure velocity (P = 0.02) in the modified clinical test of sensory interaction for balance test, center of pressure velocity (P < 0.01), and directional control (P < 0.01) in limits of stability test, isometric force during ankle dorsiflexion (P = 0.01), knee extension (P < 0.01), and knee flexion (P < 0.01). Balance and strength exercises are effective in improving postural control and lower-limb strength in elderly women with osteoporosis.

Infrastructure for Rapid Development of Java GUI Programs

NASA Technical Reports Server (NTRS)

Jones, Jeremy; Hostetter, Carl F.; Wheeler, Philip

2006-01-01

The Java Application Shell (JAS) is a software framework that accelerates the development of Java graphical-user-interface (GUI) application programs by enabling the reuse of common, proven GUI elements, as distinguished from writing custom code for GUI elements. JAS is a software infrastructure upon which Java interactive application programs and graphical user interfaces (GUIs) for those programs can be built as sets of plug-ins. JAS provides an application- programming interface that is extensible by application-specific plugins that describe and encapsulate both specifications of a GUI and application-specific functionality tied to the specified GUI elements. The desired GUI elements are specified in Extensible Markup Language (XML) descriptions instead of in compiled code. JAS reads and interprets these descriptions, then creates and configures a corresponding GUI from a standard set of generic, reusable GUI elements. These elements are then attached (again, according to the XML descriptions) to application-specific compiled code and scripts. An application program constructed by use of JAS as its core can be extended by writing new plug-ins and replacing existing plug-ins. Thus, JAS solves many problems that Java programmers generally solve anew for each project, thereby reducing development and testing time.

Mechanical Analysis of W78/88-1 Life Extension Program Warhead Design Options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Nathan

2014-09-01

Life Extension Program (LEP) is a program to repair/replace components of nuclear weapons to ensure the ability to meet military requirements. The W78/88-1 LEP encompasses the modernization of two major nuclear weapon reentry systems into an interoperable warhead. Several design concepts exist to provide different options for robust safety and security themes, maximum non-nuclear commonality, and cost. Simulation is one capability used to evaluate the mechanical performance of the designs in various operational environments, plan for system and component qualification efforts, and provide insight into the survivability of the warhead in environments that are not currently testable. The simulation effortsmore » use several Sandia-developed tools through the Advanced Simulation and Computing program, including Cubit for mesh generation, the DART Model Manager, SIERRA codes running on the HPC TLCC2 platforms, DAKOTA, and ParaView. Several programmatic objectives were met using the simulation capability including: (1) providing early environmental specification estimates that may be used by component designers to understand the severity of the loads their components will need to survive, (2) providing guidance for load levels and configurations for subassembly tests intended to represent operational environments, and (3) recommending design options including modified geometry and material properties. These objectives were accomplished through regular interactions with component, system, and test engineers while using the laboratory's computational infrastructure to effectively perform ensembles of simulations. Because NNSA has decided to defer the LEP program, simulation results are being documented and models are being archived for future reference. However, some advanced and exploratory efforts will continue to mature key technologies, using the results from these and ongoing simulations for design insights, test planning, and model validation.« less

U.S. Nuclear Weapons Modernization - the Stockpile Life Extension Program

NASA Astrophysics Data System (ADS)

Cook, Donald

2016-03-01

Underground nuclear testing of U.S. nuclear weapons was halted by President George H.W. Bush in 1992 when he announced a moratorium. In 1993, the moratorium was extended by President Bill Clinton and, in 1995, a program of Stockpile Stewardship was put in its place. In 1996, President Clinton signed the Comprehensive Nuclear Test Ban Treaty (CTBT). Twenty years have passed since then. Over the same time, the average age of a nuclear weapon in the stockpile has increased from 6 years (1992) to nearly 29 years (2015). At its inception, achievement of the objectives of the Stockpile Stewardship Program (SSP) appeared possible but very difficult. The cost to design and construct several large facilities for precision experimentation in hydrodynamics and high energy density physics was large. The practical steps needed to move from computational platforms of less than 100 Mflops/sec to 10 Teraflops/sec and beyond were unknown. Today, most of the required facilities for SSP are in place and computational speed has been increased by more than six orders of magnitude. These, and the physicists and engineers in the complex of labs and plants within the National Nuclear Security Administration (NNSA) who put them in place, have been the basis for underpinning an annual decision, made by the weapons lab directors for each of the past 20 years, that resort to underground nuclear testing is not needed for maintaining confidence in the safety and reliability of the U.S stockpile. A key part of that decision has been annual assessment of the physical changes in stockpiled weapons. These weapons, quite simply, are systems that invariably and unstoppably age in the internal weapon environment of radioactive materials and complex interfaces of highly dissimilar organic and inorganic materials. Without an ongoing program to rebuild some components and replace other components to increase safety or security, i.e., life extending these weapons, either underground testing would again be required to assess many changes at once, or confidence in these weapons would be reduced. The strategy and details of the U.S. Stockpile Life Extension Program will be described in this talk. In brief, the strategy is to reduce the number of weapons in the stockpile while increasing confidence in the weapons that remain and, where possible, increase their safety, increase their security, and reduce their nuclear material quantities and yields. A number of ``myths'' pertaining to nuclear weapons, the SSP, and the Stockpile Life Extension Program will be explored.

Family of Beyond Line-of-Sight - Terminals (FAB-T)

DTIC Science & Technology

2013-12-01

Inter- operable with the AEHF, APS, Milstar, and UFO -E/EE Inter- operable with the AEHF, APS, Milstar, and UFO -E/EE Inter- operable with the...AEHF, APS, Milstar, and UFO -E/EE Milstar connectivity has been extensively tested; partial AEHF on-orbit testing has been conducted...Program SR-3300. This performance parameter only applies to the CPT configuration. 8. Interoperability with UFO /E and UFO /EE is predicated on

Design and Testing of CPAS Main Deployment Bag Energy Modulator

NASA Technical Reports Server (NTRS)

Mollmann, Catherine

2017-01-01

During the developmental testing program for CPAS (Capsule Parachute Assembly System), the parachute system for the NASA Orion Crew Module, simulation revealed that high loads may be experienced by the pilot risers during the most devere deployment conditions. As the role of the pilot parachutes is to deploy the main parachutes, these high loads introduced the possibility of main deployment failure. In order to mitigate these high loads, a set of energy modulators was incorporated between the pilot riser and the main deployment bag. An extensive developmental program was implemented to ensure the adequacy of these energy modulators. After initial design comparisons, the energy modulator design was validated through slow-speed joint tests as well as through high-speed bungee tests. This paper documents the design, development, and results of multiple tests completed on the final design.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnis Judzis

2003-01-01

This document details the progress to date on the ''OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE -- A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING'' contract for the quarter starting October 2002 through December 2002. Even though we are awaiting the optimization portion of the testing program, accomplishments included the following: (1) Smith International participated in the DOE Mud Hammer program through full scale benchmarking testing during the week of 4 November 2003. (2) TerraTek acknowledges Smith International, BP America, PDVSA, and ConocoPhillips for cost-sharing the Smith benchmarking tests allowing extension of the contract to add to themore » benchmarking testing program. (3) Following the benchmark testing of the Smith International hammer, representatives from DOE/NETL, TerraTek, Smith International and PDVSA met at TerraTek in Salt Lake City to review observations, performance and views on the optimization step for 2003. (4) The December 2002 issue of Journal of Petroleum Technology (Society of Petroleum Engineers) highlighted the DOE fluid hammer testing program and reviewed last years paper on the benchmark performance of the SDS Digger and Novatek hammers. (5) TerraTek's Sid Green presented a technical review for DOE/NETL personnel in Morgantown on ''Impact Rock Breakage'' and its importance on improving fluid hammer performance. Much discussion has taken place on the issues surrounding mud hammer performance at depth conditions.« less

Increasing Depth of Self Perception in Children through a Course in Psychology: A Feasibility Study of a Teacher Training Program

ERIC Educational Resources Information Center

Long, Barbara Ellis

1974-01-01

Tests the hypothesis that teachers can learn about and use a psychological curriculum without extensive prior study of psychology, and that students will show gain in depth of self-perception and higher levels of psychological maturity. (Author/RP)

Classroom Assessment of Socialization.

ERIC Educational Resources Information Center

Slavenas, Rosemarie

1985-01-01

Argues that while the cognitive area in early childhood programs has been the focus of extensive research, socialization is still often assumed to be enhanced by the mere presence of other children. Assessment, evaluation, and planning by teachers is encouraged through testing and information gathered about the child, his/her peers and siblings,…

Validation, acceptance, and extension of a predictive model of reproductive toxicity using ToxCast data

EPA Science Inventory

The EPA ToxCast research program uses a high-throughput screening (HTS) approach for predicting the toxicity of large numbers of chemicals. Phase-I tested 309 well-characterized chemicals (mostly pesticides) in over 500 assays of different molecular targets, cellular responses an...

Considerations in Use of the EPA’s ToxCast Data for Environmental Toxicology (SETAC)

EPA Science Inventory

The US EPA has developed the ToxCast program to prioritize chemicals for selective toxicity testing. ToxCast relies on extensive bioactivity profiling using a panel of biochemical and cellular assays that measure chemicals effects on potential molecular initiating events and key ...

SEABEE Pretest Results of the Joint Logistics-over-the-Shore (LOTS) Test and Evaluation Program.

DTIC Science & Technology

1977-12-07

in the harbor. None of the equipment required extensive shoring. Some chocks and * wedges were placed on the equipment to increase its stability. P...incident. A subsequent examination revealed considerable structural damage to *the Peck & Hale tie-downs. Evidently one of the latching devices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pastore, Giovanni; Rabiti, Cristian; Pizzocri, Davide

PolyPole is a numerical algorithm for the calculation of intra-granular fission gas release. In particular, the algorithm solves the gas diffusion problem in a fuel grain in time-varying conditions. The program has been extensively tested. PolyPole combines a high accuracy with a high computational efficiency and is ideally suited for application in fuel performance codes.

F-16XL-2 Supersonic Laminar Flow Control Flight Test Experiment

NASA Technical Reports Server (NTRS)

Anders, Scott G.; Fischer, Michael C.

1999-01-01

The F-16XL-2 Supersonic Laminar Flow Control Flight Test Experiment was part of the NASA High-Speed Research Program. The goal of the experiment was to demonstrate extensive laminar flow, to validate computational fluid dynamics (CFD) codes and design methodology, and to establish laminar flow control design criteria. Topics include the flight test hardware and design, airplane modification, the pressure and suction distributions achieved, the laminar flow achieved, and the data analysis and code correlation.

Verification Tools Secure Online Shopping, Banking

NASA Technical Reports Server (NTRS)

2010-01-01

Just like rover or rocket technology sent into space, the software that controls these technologies must be extensively tested to ensure reliability and effectiveness. Ames Research Center invented the open-source Java Pathfinder (JPF) toolset for the deep testing of Java-based programs. Fujitsu Labs of America Inc., based in Sunnyvale, California, improved the capabilities of the JPF Symbolic Pathfinder tool, establishing the tool as a means of thoroughly testing the functionality and security of Web-based Java applications such as those used for Internet shopping and banking.

Application of subsize specimens in nuclear plant life extension

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosinski, S.T.; Kumar, A.S.; Cannon, S.C.

1991-01-01

The US Department of Energy is sponsoring a research effort through Sandia National Laboratories and the University of Missour-Rolla to test a correlation for the upper shelf energy (USE) values obtained from the impact testing of subsize Charpy V-notch specimens to those obtained from the testing of full size samples. The program involves the impact testing of unirradiated and irradiated full, half, and third size Charpy V-notch specimens. To verify the applicability of the correlation on LWR materials unirradiated and irradiated full, half, and third size Charpy V-notch specimens of a commercial pressure vessel steel (ASTM A533 Grade B) willmore » be tested. This paper will provide details of the program and present results obtained from the application of the developed correlation methodology to the impact testing of the unirradiated full, half, and third size A533 Grade B Charpy V-notch specimens.« less

Application of subsize specimens in nuclear plant life extension

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosinski, S.T.; Kumar, A.S.; Cannon, S.C.

1991-12-31

The US Department of Energy is sponsoring a research effort through Sandia National Laboratories and the University of Missour-Rolla to test a correlation for the upper shelf energy (USE) values obtained from the impact testing of subsize Charpy V-notch specimens to those obtained from the testing of full size samples. The program involves the impact testing of unirradiated and irradiated full, half, and third size Charpy V-notch specimens. To verify the applicability of the correlation on LWR materials unirradiated and irradiated full, half, and third size Charpy V-notch specimens of a commercial pressure vessel steel (ASTM A533 Grade B) willmore » be tested. This paper will provide details of the program and present results obtained from the application of the developed correlation methodology to the impact testing of the unirradiated full, half, and third size A533 Grade B Charpy V-notch specimens.« less

A comparison of fitness-case sampling methods for genetic programming

NASA Astrophysics Data System (ADS)

Martínez, Yuliana; Naredo, Enrique; Trujillo, Leonardo; Legrand, Pierrick; López, Uriel

2017-11-01

Genetic programming (GP) is an evolutionary computation paradigm for automatic program induction. GP has produced impressive results but it still needs to overcome some practical limitations, particularly its high computational cost, overfitting and excessive code growth. Recently, many researchers have proposed fitness-case sampling methods to overcome some of these problems, with mixed results in several limited tests. This paper presents an extensive comparative study of four fitness-case sampling methods, namely: Interleaved Sampling, Random Interleaved Sampling, Lexicase Selection and Keep-Worst Interleaved Sampling. The algorithms are compared on 11 symbolic regression problems and 11 supervised classification problems, using 10 synthetic benchmarks and 12 real-world data-sets. They are evaluated based on test performance, overfitting and average program size, comparing them with a standard GP search. Comparisons are carried out using non-parametric multigroup tests and post hoc pairwise statistical tests. The experimental results suggest that fitness-case sampling methods are particularly useful for difficult real-world symbolic regression problems, improving performance, reducing overfitting and limiting code growth. On the other hand, it seems that fitness-case sampling cannot improve upon GP performance when considering supervised binary classification.

Impact of Chemistry Teachers' Knowledge and Practices on Student Achievement

NASA Astrophysics Data System (ADS)

Scantlebury, Kathryn

2008-10-01

Professional development programs promoting inquiry-based teaching are challenged with providing teachers content knowledge and using pedagogical approaches that model standards based instruction. Inquiry practices are also important for undergraduate students. This paper focuses on the evaluation of an extensive professional development program for chemistry teachers that included chemistry content tests for students and the teachers and the impact of undergraduate research experiences on college students' attitudes towards chemistry. Baseline results for the students showed that there were no gender differences on the achievement test but white students scored significantly higher than non-white students. However, parent/adult involvement with chemistry homework and projects, was a significant negative predictor of 11th grade students' test chemistry achievement score. This paper will focus on students' achievement and attitude results for teachers who are mid-way through the program providing evidence that on-going, sustained professional development in content and pedagogy is critical for improving students' science achievement.

GSFC Systems Test and Operation Language (STOL) functional requirements and language description

NASA Technical Reports Server (NTRS)

Desjardins, R.; Hall, G.; Mcguire, J.; Merwarth, P.; Mocarsky, W.; Truszkowski, W.; Villasenor, A.; Brosi, F.; Burch, P.; Carey, D.

1978-01-01

The Systems Tests and Operation Language (STOL) provides the means for user communication with payloads, applications programs, and other ground system elements. It is a systems operation language that enables an operator or user to communicate a command to a computer system. The system interprets each high level language directive from the user and performs the indicated action, such as executing a program, printing out a snapshot, or sending a payload command. This document presents the following: (1) required language features and implementation considerations; (2) basic capabilities; (3) telemetry, command, and input/output directives; (4) procedure definition and control; (5) listing, extension, and STOL nucleus capabilities.

Spring 2013 Graduate Engineering Internship Summary

NASA Technical Reports Server (NTRS)

Ehrlich, Joshua

2013-01-01

In the spring of 2013, I participated in the National Aeronautics and Space Administration (NASA) Pathways Intern Employment Program at the Kennedy Space Center (KSC) in Florida. This was my final internship opportunity with NASA, a third consecutive extension from a summer 2012 internship. Since the start of my tenure here at KSC, I have gained an invaluable depth of engineering knowledge and extensive hands-on experience. These opportunities have granted me the ability to enhance my systems engineering approach in the field of payload design and testing as well as develop a strong foundation in the area of composite fabrication and testing for repair design on space vehicle structures. As a systems engineer, I supported the systems engineering and integration team with final acceptance testing of the Vegetable Production System, commonly referred to as Veggie. Verification and validation (V and V) of Veggie was carried out prior to qualification testing of the payload, which incorporated the process of confirming the system's design requirements dependent on one or more validation methods: inspection, analysis, demonstration, and testing.

A New Extension Model: The Memorial Middle School Agricultural Extension and Education Center

ERIC Educational Resources Information Center

Skelton, Peter; Seevers, Brenda

2010-01-01

The Memorial Middle School Agricultural Extension and Education Center is a new model for Extension. The center applies the Cooperative Extension Service System philosophy and mission to developing public education-based programs. Programming primarily serves middle school students and teachers through agricultural and natural resource science…

Nuclear Weapons Council: Enhancing Interagency Collaboration Could Help with Implementation of Expanded Responsibilities

DTIC Science & Technology

2015-05-01

provide a cross section of the types of programs and activities the Council oversees. Specifically, we selected the B61 -12 life-extension program; the... B61 -12 life-extension program; the W76-1 life-extension program; the plutonium strategy; and budget- related activities,7 such as the Council’s

Animal Use and Lessons Learned in the U.S. High Production Volume Chemicals Challenge Program

PubMed Central

Manuppello, Joseph R.; Willett, Catherine E.; Sandler, Jessica T.

2012-01-01

Background: Launched by the U.S. Environmental Protection Agency (EPA) in 1998, the High Production Volume (HPV) Challenge Program was developed to address the perceived gap in basic hazard information for the 2,800 chemicals produced or imported into the United States in quantities of ≥ 1 million pounds per year. Health and environmental effects data obtained from either existing information or through new vertebrate animal testing were voluntarily submitted by chemical companies (sponsors) to the U.S. EPA. Despite the potential for extensive animal testing, animal welfare guidelines were not provided until after the start of the program. Objectives: We evaluated compliance with the animal welfare principles that arose from an agreement reached between the U.S. EPA and animal protection organizations and tracked the HPV program’s use of animals for testing. Discussion: Under a worst-case scenario, the HPV program had the potential to consume 3.5 million animals in new testing. After application of animal-saving measures, approximately 127,000 were actually used. Categorization of chemicals based on similar structure–activity and application of read-across, along with use of existing test data, were the most effective means of reducing animal testing. However, animal-saving measures were inconsistently used by both sponsors and the U.S. EPA. Conclusions: Lessons learned from the HPV program can be applied to future programs to minimize animal testing and promote more human-relevant chemical risk assessment. PMID:23033452

Non-formal educator use of evaluation results.

PubMed

Baughman, Sarah; Boyd, Heather H; Franz, Nancy K

2012-08-01

Increasing demands for accountability in educational programming have resulted in increasing calls for program evaluation in educational organizations. Many organizations include conducting program evaluations as part of the job responsibilities of program staff. Cooperative Extension is a complex organization offering non-formal educational programs through land grant universities. Many Extension services require non-formal educational program evaluations be conducted by field-based Extension educators. Evaluation research has focused primarily on the efforts of professional, external evaluators. The work of program staff with many responsibilities including program evaluation has received little attention. This study examined how field based Extension educators (i.e. program staff) in four Extension services use the results of evaluations of programs that they have conducted themselves. Four types of evaluation use are measured and explored; instrumental use, conceptual use, persuasive use and process use. Results indicate that there are few programmatic changes as a result of evaluation findings among the non-formal educators surveyed in this study. Extension educators tend to use evaluation results to persuade others about the value of their programs and learn from the evaluation process. Evaluation use is driven by accountability measures with very little program improvement use as measured in this study. Practical implications include delineating accountability and program improvement tasks within complex organizations in order to align evaluation efforts and to improve the results of both. There is some evidence that evaluation capacity building efforts may be increasing instrumental use by educators evaluating their own programs. Copyright © 2011 Elsevier Ltd. All rights reserved.

Commerce, Research and Education: Contributions and Challenges of Marine Extension Work in NOAA Sea Grant Program-Puerto Rico, Michigan and National office

NASA Astrophysics Data System (ADS)

Aleman Diaz, A.

2006-12-01

The National Sea Grant program represents NOAA's nationwide university-based program in support of coastal resource use and conservation. This program is composed of 30 university-based programs that work with local coastal communities. This study focuses on a historical and multi-sited ethnographic approach that analyzes two Sea Grant Programs and their connection to the overarching NOAA national goals from 1980- 2000.The project aims to offer insight on how the extension agent position facilitates the resolution of coastal and marine management and tourism issues. The extension agents are staff who have an extensive knowledge of available coastal resources and have the role of translating this information to coastal stakeholders. Additionally, these agents assess the needs of coastal communities and report back to the program making their role into a position that can effectively alter and/or contribute to institutional and environmental management programs at broader, cross-country and global levels. The extension programs in Michigan and Puerto Rico were examined to understand how local programs respond to cultural and regional processes shaping marine extension and the management of issues faced by coastal stakeholders. A total of 36 semi- structured in-depth interviews were completed at each site, to address the following questions: (1) How do extension agents view their role at the Puerto Rico and Michigan offices and in the Sea Grant program? How do they view the conditions of their work? (2) How do their views compare to the accomplishments by each Sea Grant administration and internal inquiries? How do their views reveal conditions documented in Puerto Rico and Michigan (e.g., social, cultural, political, economic, etc)? (3) What kind of strategies do agents develop for the management of specific coastal and tourism related projects? (4) How do the Puerto Rico and Michigan offices coordinate their work, and collaborate with other "college" programs and with the National office? Although differences based on organizational structure were evident, there were similarities regarding the marine extension work history, practices, and challenges among these local programs. Preliminary findings suggests that current challenges for Sea Grant marine extension include maintenance of non- advocacy and mediation roles among coastal stakeholders, their positioning relative to research especially conducting and delivering of science to public, and development of their multi-faceted skills sets essential to extension. Simultaneously, the Sea Grant program and marine extension agents provide comprehensive ways for integrated resource management like avenues for dialogue and information-technology transfer with bottom up approaches.

Time-dependent reliability analysis of ceramic engine components

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.

1993-01-01

The computer program CARES/LIFE calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/or proof test loading. This program is an extension of the CARES (Ceramics Analysis and Reliability Evaluation of Structures) computer program. CARES/LIFE accounts for the phenomenon of subcritical crack growth (SCG) by utilizing either the power or Paris law relations. The two-parameter Weibull cumulative distribution function is used to characterize the variation in component strength. The effects of multiaxial stresses are modeled using either the principle of independent action (PIA), the Weibull normal stress averaging method (NSA), or the Batdorf theory. Inert strength and fatigue parameters are estimated from rupture strength data of naturally flawed specimens loaded in static, dynamic, or cyclic fatigue. Two example problems demonstrating proof testing and fatigue parameter estimation are given.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arnis Judzis

2002-10-01

This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE -- A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting July 2002 through September 2002. Even though we are awaiting the optimization portion of the testing program, accomplishments include the following: (1) Smith International agreed to participate in the DOE Mud Hammer program. (2) Smith International chromed collars for upcoming benchmark tests at TerraTek, now scheduled for 4Q 2002. (3) ConocoPhillips had a field trial of the Smith fluid hammer offshore Vietnam. The hammer functioned properly, though themore » well encountered hole conditions and reaming problems. ConocoPhillips plan another field trial as a result. (4) DOE/NETL extended the contract for the fluid hammer program to allow Novatek to ''optimize'' their much delayed tool to 2003 and to allow Smith International to add ''benchmarking'' tests in light of SDS Digger Tools' current financial inability to participate. (5) ConocoPhillips joined the Industry Advisors for the mud hammer program. (6) TerraTek acknowledges Smith International, BP America, PDVSA, and ConocoPhillips for cost-sharing the Smith benchmarking tests allowing extension of the contract to complete the optimizations.« less

Service Life Extension of the ISS Propulsion System Elements

NASA Technical Reports Server (NTRS)

Kamath, Ulhas; Grant, Gregory; Kuznetsov, Sergei; Shaevich, Sergey; Spencer, Victor

2015-01-01

The International Space Station (ISS) is a result of international collaboration in building a sophisticated laboratory of an unprecedented scale in Low Earth Orbit. After a complex assembly sequence spanning over a decade, some of the early modules launched at the beginning of the program would reach the end of their certified lives, while the newer modules were just being commissioned into operation. To maximize the return on global investments in this one-of-a-kind orbiting platform that was initially conceived for a service life until 2016, it is essential for the cutting edge research on ISS to continue as long as the station can be sustained safely in orbit. ISS Program is assessing individual modules in detail to extend the service life of the ISS to 2024, and possibly to 2028. Without life extension, Functional Cargo Block (known by its Russian acronym as FGB) and the Service Module (SM), two of the early modules on the Russian Segment, would reach the end of their certified lives in 2013 and 2015 respectively. Both FGB and SM are critical for the propulsive function of the ISS. This paper describes the approach used for the service life extension of the FGB propulsion system. Also presented is an overview of the system description along with the process adopted for developing the life test plans based on considerations of system failure modes, fault tolerance and safety provisions. Tests and analyses performed, important findings and life estimates are summarized. Based on the life extension data, FGB propulsion system, in general, is considered ready for a service life until 2028.

Lifetime Reliability Evaluation of Structural Ceramic Parts with the CARES/LIFE Computer Program

NASA Technical Reports Server (NTRS)

Nemeth, Noel N.; Powers, Lynn M.; Janosik, Lesley A.; Gyekenyesi, John P.

1993-01-01

The computer program CARES/LIFE calculates the time-dependent reliability of monolithic ceramic components subjected to thermomechanical and/or proof test loading. This program is an extension of the CARES (Ceramics Analysis and Reliability Evaluation of Structures) computer program. CARES/LIFE accounts for the phenomenon of subcritical crack growth (SCG) by utilizing the power law, Paris law, or Walker equation. The two-parameter Weibull cumulative distribution function is used to characterize the variation in component strength. The effects of multiaxial stresses are modeled using either the principle of independent action (PIA), Weibull's normal stress averaging method (NSA), or Batdorf's theory. Inert strength and fatigue parameters are estimated from rupture strength data of naturally flawed specimens loaded in static, dynamic, or cyclic fatigue. Two example problems demonstrating cyclic fatigue parameter estimation and component reliability analysis with proof testing are included.

Design, fabrication and test of graphite/epoxy metering truss structure components, phase 3

NASA Technical Reports Server (NTRS)

1974-01-01

The design, materials, tooling, manufacturing processes, quality control, test procedures, and results associated with the fabrication and test of graphite/epoxy metering truss structure components exhibiting a near zero coefficient of thermal expansion are described. Analytical methods were utilized, with the aid of a computer program, to define the most efficient laminate configurations in terms of thermal behavior and structural requirements. This was followed by an extensive material characterization and selection program, conducted for several graphite/graphite/hybrid laminate systems to obtain experimental data in support of the analytical predictions. Mechanical property tests as well as the coefficient of thermal expansion tests were run on each laminate under study, the results of which were used as the selection criteria for the single most promising laminate. Further coefficient of thermal expansion measurement was successfully performed on three subcomponent tubes utilizing the selected laminate.

Don't Mess with the NEST

NASA Astrophysics Data System (ADS)

Larson, Michael

2012-03-01

This presentation will describe the history of the Nuclear Emergency Support Team (NEST) and its evolution over the years. NEST was formed due to a number of nuclear extortion threats received in the early 1970s. From the beginning NEST developed an extensive exercise program to test and expand capabilities. The Nuclear Assessment Program (NAP) was developed, in part, to determine if NEST deployments were required. A major revamp of the NEST program occurred in 1994. Many other organizations work in conjunction with NEST in particular the FBI and DOD. Considerable research and development has been performed in the areas of Access, Search, Diagnostics, Device Assessment, and Disablement. Extensive searches of material appearing in the unclassified literature have been and are being performed to see what is being said about nuclear materials and devices. A comprehensive study of Improvised Nuclear Devices (IND) is ongoing to determine what a terrorist can and cannot do. NEST now consists of four phases with the latest additions of Phase III, Disposition and Phase IV, Nuclear Forensics. LLNL-ABS-521775

Flight test experience with high-alpha control system techniques on the F-14 airplane

NASA Technical Reports Server (NTRS)

Gera, J.; Wilson, R. J.; Enevoldson, E. K.; Nguyen, L. T.

1981-01-01

Improved handling qualities of fighter aircraft at high angles of attack can be provided by various stability and control augmentation techniques. NASA and the U.S. Navy are conducting a joint flight demonstration of these techniques on an F-14 airplane. This paper reports on the flight test experience with a newly designed lateral-directional control system which suppresses such high angle of attack handling qualities problems as roll reversal, wing rock, and directional divergence while simultaneously improving departure/spin resistance. The technique of integrating a piloted simulation into the flight program was used extensively in this program. This technique had not been applied previously to high angle of attack testing and required the development of a valid model to simulate the test airplane at extremely high angles of attack.

Runtime Detection of C-Style Errors in UPC Code

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pirkelbauer, P; Liao, C; Panas, T

2011-09-29

Unified Parallel C (UPC) extends the C programming language (ISO C 99) with explicit parallel programming support for the partitioned global address space (PGAS), which provides a global memory space with localized partitions to each thread. Like its ancestor C, UPC is a low-level language that emphasizes code efficiency over safety. The absence of dynamic (and static) safety checks allows programmer oversights and software flaws that can be hard to spot. In this paper, we present an extension of a dynamic analysis tool, ROSE-Code Instrumentation and Runtime Monitor (ROSECIRM), for UPC to help programmers find C-style errors involving the globalmore » address space. Built on top of the ROSE source-to-source compiler infrastructure, the tool instruments source files with code that monitors operations and keeps track of changes to the system state. The resulting code is linked to a runtime monitor that observes the program execution and finds software defects. We describe the extensions to ROSE-CIRM that were necessary to support UPC. We discuss complications that arise from parallel code and our solutions. We test ROSE-CIRM against a runtime error detection test suite, and present performance results obtained from running error-free codes. ROSE-CIRM is released as part of the ROSE compiler under a BSD-style open source license.« less

Academician Basov, high-power lasers, and the antimissile defense problem

NASA Astrophysics Data System (ADS)

Zarubin, Peter Vasilievich

2013-02-01

A review of the extensive program of the pioneering research and development of high-power lasers and laser radar undertaken in the USSR during the years 1964 to 1978 under the scientific supervision of N.G. Basov is presented. In the course of this program, many high-energy lasers with unique properties were created, new big research and design teams were formed, and the laser production and testing facilities were extended and developed. The program was fulfilled at many leading research institutions and design bureaus of the USSR Academy of Sciences and defense industry.

External Tank Program Legacy of Success

NASA Technical Reports Server (NTRS)

Welzyn, Ken; Pilet, Jeff

2010-01-01

I.Goal: a) Extensive TPS damage caused by extreme hail storm. b) Repair plan required to restore TPS to minimize program manifest impacts. II. Challenges: a) Skeptical technical community - Concerned about interactions of damage with known/unknown failure modes. b) Schedule pressure to accommodate ISS program- Next tank still at MAF c)Limited ET resources. III. How d We Do It?: a) Developed unique engineering requirements and tooling to minimize repairs. b) Performed large amount of performance testing to demonstrate understanding of repairs and residual conditions. c) Effectively communicated results to technical community and management to instill confidence in expected performance.

Modular space station phase B extension program master plan

NASA Technical Reports Server (NTRS)

Munsey, E. H.

1971-01-01

The project is defined for design, development, fabrication, test, and pre-mission and mission operations of a shuttle-launched modular space station. The project management approach is described in terms of organization, management requirements, work breakdown structure, schedule, time-phased logic, implementation plans, manpower, and funding. The programmatic and technical problems are identified.

The Effect of CRT Screen Design on Learning.

ERIC Educational Resources Information Center

Grabinger, R. Scott; Albers, Starleen

Two computer assisted instruction programs tested the effects of plain and enhanced screen designs with or without information about those designs and task-type on time and learning. Subjects were 140 fourth grade students in Lincoln, Nebraska who had extensive prior experience with computers. The enhanced versions used headings, directive cues,…

40 CFR Appendix II to Subpart S of... - As-Received Testing Vehicle Rejection Criteria

Code of Federal Regulations, 2011 CFR

2011-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES... vehicle has been used for severe duty (trailer towing for passenger cars, snow plowing, racing) 4. The vehicle has a history of extensive collision damage or major engine repair (piston, crank, cylinder head...

40 CFR Appendix II to Subpart S of... - As-Received Testing Vehicle Rejection Criteria

Code of Federal Regulations, 2014 CFR

2014-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES... vehicle has been used for severe duty (trailer towing for passenger cars, snow plowing, racing) 4. The vehicle has a history of extensive collision damage or major engine repair (piston, crank, cylinder head...

40 CFR Appendix II to Subpart S of... - As-Received Testing Vehicle Rejection Criteria

Code of Federal Regulations, 2013 CFR

2013-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES... vehicle has been used for severe duty (trailer towing for passenger cars, snow plowing, racing) 4. The vehicle has a history of extensive collision damage or major engine repair (piston, crank, cylinder head...

40 CFR Appendix II to Subpart S of... - As-Received Testing Vehicle Rejection Criteria

Code of Federal Regulations, 2012 CFR

2012-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES... vehicle has been used for severe duty (trailer towing for passenger cars, snow plowing, racing) 4. The vehicle has a history of extensive collision damage or major engine repair (piston, crank, cylinder head...

Evaluation of Radon Outreach Programming in Chaffee and Park Counties, Colorado

ERIC Educational Resources Information Center

Jones, Kurt M.

2015-01-01

Colorado State University Extension in Chaffee and Park Counties conducted numerous outreach educational activities between 2007 and 2010. A follow-up evaluation was conducted to determine whether one outreach activity was more effective at encouraging individuals to test their homes for radon or to mitigate their homes. Participants in the…

Use of in Vitro HTS-Derived Concentration-Response Data as Biological Descriptors Improves the Accuracy of QSAR Models of in Vivo Toxicity

EPA Science Inventory

Background: Quantitative high-throughput screening (qHTS) assays are increasingly being employed to inform chemical hazard identification. Hundreds of chemicals have been tested in dozens of cell lines across extensive concentration ranges by the National Toxicology Program in co...

Mapping Standardised Test Scores with Other Variables Using GIS

ERIC Educational Resources Information Center

Kerski, Joseph; Linn, Sophia; Gindele, Rick

2005-01-01

This article discusses the Mapping CSAP (Colorado Student Achievement Program) project, an extension of a grant-funded programme that sought to show the importance of a geographic perspective on public policy decision-making at the state level. In this programme, high school students were asked to grapple with current state issues in Colorado,…

Hypnosis in Educational Programs: Its Implications As an Educational Aid.

ERIC Educational Resources Information Center

Knight, Joseph

Although hypnosis has not been extensively used in education, a review of past research reveals five areas which might benefit from hypnotherapy: (1) motivation, (2) study habits, (3) concentration, (4) remedial reading, and (5) test anxiety. A questionnaire focusing on these areas was developed to determine the attitude of professional personnel…

Apollo Experience Report: Command and Service Module Reaction Control Systems

NASA Technical Reports Server (NTRS)

Taeuber, Ralph J.; Weary, Dwayne P.

1973-01-01

The reaction control systems of the Apollo command and service module were developed and modified between July 1961 and July 1969. The successful development of these systems, as part of the Apollo Program, was the result of extensive testing, retesting, and modifications of the hardware to ensure system capability and intrasystem compatibility.

Collaboratively Evaluating Cooperative Extension Educational Interventions.

ERIC Educational Resources Information Center

Webb, Debb; Murphy, Dennis J.; Kiernan, Nancy Ellen

2001-01-01

Three intervention models to reduce hazards and risks of farm work were tested: self-audit (n=73), youth safety and health program (n=64), and a community coalition for safety and health (n=17). Despite some difficulties, university researchers and agents did accomplish the primary goal: scientific evaluation of models of safety education. (SK)

78 FR 53374 - Energy Conservation Program for Consumer Products: Test Procedures for Refrigerators...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-29

... Freezers AGENCY: Office of Energy Efficiency and Renewable Energy, Department of Energy. ACTION: Extension... INFORMATION CONTACT: Mr. Lucas Adin, U.S. Department of Energy, Office of Energy Efficiency and Renewable... Energy Efficiency, Energy Efficiency and Renewable Energy. [FR Doc. 2013-21115 Filed 8-28-13; 8:45 am...

76 FR 17755 - Energy Conservation Program for Consumer Products: Decision and Order Granting 180-Day Extension...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-31

... standby mode and off mode energy consumption of those products. The petitioners demonstrated that meeting... energy consumption. 75 FR 64621. More specifically, this test procedure final rule included a standby... ae ) for gas or oil-fired furnaces or boilers and annual electric energy consumption (E e ) for...

Multiple Year Extension Program Outcomes & Impacts through Evaluation

ERIC Educational Resources Information Center

Hachfeld, Gary A.; Bau, David B.; Holcomb, C. Robert; Craig, J. William

2013-01-01

Dwindling public funding as well as greater competition for grant dollars create a challenge for Extension. For Extension to remain a financially viable organization, educators have to be able to produce substantive, measurable program outcomes and impacts. Evaluative data can inform program development and delivery, and helps administrators…

Extension Youth Educators' Technology Use in Youth Development Programming

ERIC Educational Resources Information Center

McClure, Carli; Buquoi, Brittany; Kotrlik, Joe W.; Machtmes, Krisanna; Bunch, J. C.

2014-01-01

The purpose of this descriptive-correlational study was to determine the use of technology in youth programming by Extension youth development educators in Louisiana, Mississippi, and Tennessee. Data were collected via e-mail and a SurveyMonkey© questionnaire. Extension educators are using some technology in youth development programming. More…

Repeat Customer Success in Extension

ERIC Educational Resources Information Center

Bess, Melissa M.; Traub, Sarah M.

2013-01-01

Four multi-session research-based programs were offered by two Extension specialist in one rural Missouri county. Eleven participants who came to multiple Extension programs could be called "repeat customers." Based on the total number of participants for all four programs, 25% could be deemed as repeat customers. Repeat customers had…

78 FR 23926 - Extension of the Public Comment Period for the Draft Uranium Leasing Program Programmatic...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-23

... DEPARTMENT OF ENERGY Extension of the Public Comment Period for the Draft Uranium Leasing Program Programmatic Environmental Impact Statement AGENCY: Department of Energy. ACTION: Extension of the public... the Draft Uranium Leasing Program Programmatic Environmental Impact Statement (Draft ULP PEIS, DOE/EIS...

Structural assurance testing for post-shipping satellite inspection

NASA Astrophysics Data System (ADS)

Reynolds, Whitney D.; Doyle, Derek; Arritt, Brandon

2012-04-01

Current satellite transportation sensors can provide a binary indication of the acceleration or shock that a satellite has experienced during the shipping process but do little to identify if significant structural change has occurred in the satellite and where it may be located. When a sensor indicates that the satellite has experienced shock during transit, an extensive testing process begins to evaluate the satellite functionality. If errors occur during the functional checkout, extensive physical inspection of the structure follows. In this work an alternate method for inspecting satellites for structural defects after shipping is presented. Electro- Mechanical Impedance measurements are used as an indication of the structural state. In partnership with the Air Force Research Laboratory University Nanosatellite Program, Cornell's CUSat mass model was instrumented with piezoelectric transducers and tested under several structural damage scenarios. A method for detecting and locating changes in the structure using EMI data is presented.

Remote Attitude Measurement Sensor (RAMS)

NASA Technical Reports Server (NTRS)

Davis, H. W.

1989-01-01

Remote attitude measurement sensor (RAMS) offers a low-cost, low-risk, proven design concept that is based on mature, demonstrated space sensor technology. The electronic design concepts and interpolation algorithms were tested and proven in space hardware like th Retroreflector Field Tracker and various star trackers. The RAMS concept is versatile and has broad applicability to both ground testing and spacecraft needs. It is ideal for use as a precision laboratory sensor for structural dynamics testing. It requires very little set-up or preparation time and the output data is immediately usable without integration or extensive analysis efforts. For on-orbit use, RAMS rivals any other type of dynamic structural sensor (accelerometer, lidar, photogrammetric techniques, etc.) for overall performance, reliability, suitability, and cost. Widespread acceptance and extensive usage of RAMS will occur only after some interested agency, such as OAST, adopts the RAMS concept and provides the funding support necessary for further development and implementation of RAMS for a specific program.

Stator hub treatment study

NASA Technical Reports Server (NTRS)

Wisler, D. C.; Hilvers, D. E.

1974-01-01

The results of an experimental research program to investigate the potential of improving compressor stall margin by the application of hub treatment are presented. Extensive tuft probing showed that the two-stage, 0.5 radius ratio compressor selected for the test was indeed hub critical. Circumferential groove and baffled wide blade angle slot hub treatments under the stators were tested. Performance measurements were made with total and static pressure probes, wall static pressure taps, flow angle measuring instrumentation and hot film anemometers. Stator hub treatment was not found to be effective in improving compressor stall margin by delaying the point of onset of rotating stall or in modifying compressor performance for any of the configurations tested. Extensive regions of separated flow were observed on the suction surface of the stators near the hub. However, the treatment did not delay the point where flow separation in the stator hub region becomes apparent.

Problems Impacting Extension Program Quality at the County Level: Results from an Analysis of County Program Reviews Conducted in Florida

ERIC Educational Resources Information Center

Harder, Amy; Moore, Austen; Mazurkewicz, Melissa; Benge, Matt

2013-01-01

Needs assessments are an important tool for informing organizational development efforts in Extension. The purpose of the study reported here was to identify problems faced by county units within UF/IFAS Extension during county program reviews. The findings were drawn from the reports created after five county units experienced program reviews in…

Selected winglet and mixed flow long duct nacelle development for DC-10 derivative aircraft

NASA Technical Reports Server (NTRS)

Taylor, A. B.

1980-01-01

The high speed cruise drag effects of the installation of winglets and a wing tip extension and a mixed flow long duct nacelle are investigated. The winglet program utilized a 4.7 percent semispan model in an eight foot transonic wind tunnel. Winglets provided approximately twice the cruise drag reduction of wing tip extensions for about the same increase in bending moment at the wing-fuselage juncture. The long duct nacelle interference drag program utilized the same model, without the winglets, in the 11 foot transonic wind tunnel. The long duct nacelle, installed in the same position as the current short duct nacelle and with the current production symmetric pylon, was a relatively low risk installation. A pylon with an addition small rearward fairing was also tested and showed some drag reduction potential over the current pylon.

Student achievement and attitudes in astronomy: An experimental comparison of two planetarium programs

NASA Astrophysics Data System (ADS)

Mallon, Gerald L.; Bruce, Matthew H.

Of the 1100 planetariums in the U.S., approximately 96% are smaller facilities. The majority of these use a program type called the Star Show, whereas some have advocated a different type called the Participatory Oriented Planetarium. The purpose of this study was to investigate the following question: In a smaller educational planetarium, with a capacity of between 15-75 people, is a traditional Star Show planetarium program, or a Participatory Oriented Planetarium program the most effective method of instruction and attitude change? A large scale investigation was conducted in Pennsylvania, with four smaller replications in Texas, Minnesota, California, and Nevada. In each planetarium, a group of 8-10 year old students were identified and randomly assigned to groups. 556 students were tested. The testing instruments included a paper-and-pencil content test and a Likert-style science opinionnaire. The instructional programs were chosen from existing scripts to avoid bias in their construction. Both programs dealt with constellation study. Correlated t tests were used to compare pretest to posttest scores and two-way factorial analyses of variance were used to compare the groups' posttest scores. It was concluded that, The Participatory Oriented Planetarium program, utilizing an activity-based format and extensive verbal interaction, is clearly the more effective utilization of a small planetarium facility for teaching constellation study and possibly for improving students' attitudes towards astronomy and the planetarium.

Flight test experience and controlled impact of a large, four-engine, remotely piloted airplane

NASA Technical Reports Server (NTRS)

Kempel, R. W.; Horton, T. W.

1985-01-01

A controlled impact demonstration (CID) program using a large, four engine, remotely piloted transport airplane was conducted. Closed loop primary flight control was performed from a ground based cockpit and digital computer in conjunction with an up/down telemetry link. Uplink commands were received aboard the airplane and transferred through uplink interface systems to a highly modified Bendix PB-20D autopilot. Both proportional and discrete commands were generated by the ground pilot. Prior to flight tests, extensive simulation was conducted during the development of ground based digital control laws. The control laws included primary control, secondary control, and racetrack and final approach guidance. Extensive ground checks were performed on all remotely piloted systems. However, manned flight tests were the primary method of verification and validation of control law concepts developed from simulation. The design, development, and flight testing of control laws and the systems required to accomplish the remotely piloted mission are discussed.

An assessment of laser velocimetry in hypersonic flow

NASA Technical Reports Server (NTRS)

1992-01-01

Although extensive progress has been made in computational fluid mechanics, reliable flight vehicle designs and modifications still cannot be made without recourse to extensive wind tunnel testing. Future progress in the computation of hypersonic flow fields is restricted by the need for a reliable mean flow and turbulence modeling data base which could be used to aid in the development of improved empirical models for use in numerical codes. Currently, there are few compressible flow measurements which could be used for this purpose. In this report, the results of experiments designed to assess the potential for laser velocimeter measurements of mean flow and turbulent fluctuations in hypersonic flow fields are presented. Details of a new laser velocimeter system which was designed and built for this test program are described.

Confidence in Nuclear Weapons as Numbers Decrease and Time Since Testing Increases

NASA Astrophysics Data System (ADS)

Adams, Marvin

2011-04-01

As numbers and types of nuclear weapons are reduced, the U.S. objective is to maintain a safe, secure and effective nuclear deterrent without nuclear-explosive testing. A host of issues combine to make this a challenge. An evolving threat environment may prompt changes to security systems. Aging of weapons has led to ``life extension programs'' that produce weapons that differ in some ways from the originals. Outdated and changing facilities pose difficulties for life-extension, surveillance, and dismantlement efforts. A variety of factors can make it a challenge to recruit, develop, and retain outstanding people with the skills and experience that are needed to form the foundation of a credible deterrent. These and other issues will be discussed in the framework of proposals to reduce and perhaps eliminate nuclear weapons.

LDEF electronic systems: Successes, failures, and lessons

NASA Technical Reports Server (NTRS)

Miller, Emmett; Porter, Dave; Smith, Dave; Brooks, Larry; Levorsen, Joe; Mulkey, Owen

1991-01-01

Following the Long Duration Exposure Facility (LDEF) retrieval, the Systems Special Investigation Group (SIG) participated in an extensive series of tests of various electronic systems, including the NASA provided data and initiate systems, and some experiment systems. Overall, these were found to have performed remarkably well, even though most were designed and tested under limited budgets and used at least some nonspace qualified components. However, several anomalies were observed, including a few which resulted in some loss of data. The postflight test program objectives, observations, and lessons learned from these examinations are discussed. All analyses are not yet complete, but observations to date will be summarized, including the Boeing experiment component studies and failure analysis results related to the Interstellar Gas Experiment. Based upon these observations, suggestions for avoiding similar problems on future programs are presented.

The New FARM Program: A Model for Supporting Diverse Emerging Farmers and Early-Career Extension Professionals

ERIC Educational Resources Information Center

Sirrine, J. R.; Eschbach, Cheryl L.; Lizotte, Erin; Rothwell, N. L.

2016-01-01

As early-career Extension educators challenged by societal, structural, agricultural, and fiscal trends, we designed a multiyear educational program to support the diverse needs of emerging specialty crop producers in northwest Michigan. This article presents outcomes of that program. We explore how Extension professionals can develop impactful…

Extension Home Economists as Therapists in a Behavior Modification Weight Loss Program.

ERIC Educational Resources Information Center

Beneke, William M.; Paulsen, Barbara K.

A total of 150 overweight female subjects entered a behavior modification weight loss program with extension home economists as therapists to determine the feasibility of state extension services as a vehicle for widespread dissemination of behavioral weight loss programs. The treatment, emphasizing stimulus control and nutrition education,…

Conducting a Statewide Dual-Purpose Program for Pesticide Applicators and County Extension Agents

ERIC Educational Resources Information Center

Fishel, Fred; Liu, Guodong David

2014-01-01

The University of Florida Cooperative Extension conducted a statewide program with a dual role during 2013 and 2014 to enhance efficiency. The program provided in-service training to county Extension agents and provided continuing education to meet requirements needed by licensed pesticide applicators. Using Polycom distance technology, the event…

Promoting Behavior Change Using Social Norms: Applying a Community Based Social Marketing Tool to Extension Programming

ERIC Educational Resources Information Center

Chaudhary, Anil Kumar; Warner, Laura A.

2015-01-01

Most educational programs are designed to produce lower level outcomes, and Extension educators are challenged to produce behavior change in target audiences. Social norms are a very powerful proven tool for encouraging sustainable behavior change among Extension's target audiences. Minor modifications to program content to demonstrate the…

"Taking Training to the Next Level": The American College of Surgeons Committee on Residency Training Survey.

PubMed

Damewood, Richard B; Blair, Patrice Gabler; Park, Yoon Soo; Lupi, Linda K; Newman, Rachel Williams; Sachdeva, Ajit K

The American College of Surgeons (ACS) appointed a committee of leaders from the ACS, Association of Program Directors in Surgery, Accreditation Council for Graduate Medical Education, and American Board of Surgery to define key challenges facing surgery resident training programs and to explore solutions. The committee wanted to solicit the perspectives of surgery resident program directors (PDs) given their pivotal role in residency training. Two surveys were developed, pilot tested, and administered to PDs following Institutional Review Board approval. PDs from 247 Accreditation Council for Graduate Medical Education-accredited general surgery programs were randomized to receive 1 of the 2 surveys. Bias analyses were conducted, and adjusted Pearson χ 2 tests were used to test for differences in response patterns by program type and size. All accredited general surgery programs in the United States were included in the sampling frame of the survey; 10 programs with initial or withdrawn accreditation were excluded from the sampling frame. A total of 135 PDs responded, resulting in a 54.7% response rate (Survey A: n = 67 and Survey B: n = 68). The respondent sample was determined to be representative of program type and size. Nearly 52% of PD responses were from university-based programs, and 41% had over 6 residents per graduating cohort. More than 61% of PDs reported that, compared to 10 years ago, both entering and graduating residents are less prepared in technical skills. PDs expressed significant concerns regarding the effect of duty-hour restrictions on the overall preparation of graduating residents (61%) and quality of patient care (57%). The current 5-year training structure was viewed as needing a significant or extensive increase in opportunities for resident autonomy (63%), and the greatest barriers to resident autonomy were viewed to be patient preferences not to be cared for by residents (68%), liability concerns (68%), and Centers for Medicare and Medicaid Services regulations (65%). Although 64% of PDs believe that moderate or significant changes are needed in the current structure of residency training, 35% believe that no changes in the structure are needed. When asked for their 1 best recommendation regarding the structure of surgical residency, only 22% of PDs selected retaining the current 5-year structure. The greatest percentage of PDs (28%) selected the "4 + 2" model as their 1 best recommendation for the structure to be used. In the area of faculty development, 56% of PDs supported a significant or extensive increase in Train the Teacher programs, and 41% supported a significant or extensive increase in faculty certification in education. Information regarding the valuable perspectives of PDs gathered through these surveys should help in implementing important changes in residency training and faculty development. These efforts will need to be pursued collaboratively with involvement of key stakeholders, including the organizations represented on this ACS committee. Copyright © 2017 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

A patent extension proposal to end the underrepresentation of women in clinical trials and secure meaningful drug guidance for women.

PubMed

Hathaway, Cynthia

2012-01-01

Historically, women have been systematically excluded from or underrepresented in human clinical trials of new drugs. Due to fundamental physiological differences between women and men with regard to how drugs work in the human body, testing of drugs in men alone can both deny women the full benefit of a drug and cause them to suffer from increased adverse side effects. Attempts to reform drug development law and agency practices to resolve this problem have met with only partial success. Proposed herein is a patent term extension and for studies in women, modeled upon the pediatric patent term extension, but with several key differences intended to reduce the cost to the public and fund auxiliary programs to address off-patent medicines as well. Such an extension would incentivize this research and provide meaningful guidance to women and their physicians.

CIDOC-CRM extensions for conservation processes: A methodological approach

NASA Astrophysics Data System (ADS)

Vassilakaki, Evgenia; Zervos, Spiros; Giannakopoulos, Georgios

2015-02-01

This paper aims to report the steps taken to create the CIDOC Conceptual Reference Model (CIDOC-CRM) extensions and the relationships established to accommodate the depiction of conservation processes. In particular, the specific steps undertaken for developing and applying the CIDOC-CRM extensions for defining the conservation interventions performed on the cultural artifacts of the National Archaeological Museum of Athens, Greece are presented in detail. A report on the preliminary design of the DOC-CULTURE project (Development of an integrated information environment for assessment and documentation of conservation interventions to cultural works/objects with nondestructive testing techniques [NDTs], www.ndt-lab.gr/docculture), co-financed by the European Union NSRF THALES program, can be found in Kyriaki-Manessi, Zervos & Giannakopoulos (1) whereas the NDT&E methods and their output data through CIDOC-CRM extension of the DOC-CULTURE project approach to standardize the documentation of the conservation were further reported in Kouis et al. (2).

Proceedings of the 1989 Structural Integrity Program Conference Held in San Antonio, Texas on 5-7 Dec 1989

DTIC Science & Technology

1990-04-01

selected for this study because of the availability of MSD crackgrowth data pertinent to the type of situation for which the proof test had been proposed...proof and maximum service pressures. A range of proof pressure was studied , not only for the effect on post-test safe crack growth interval, but also...to investigate the potential for stable crack extension during the test itself. 30 The study author recommended 1.5P as the optimum proof pressure, the

Analysis of 100-lb(sub f) (445-N) LO2-LCH4 Reaction Control Engine Impulse Bit Performance

NASA Technical Reports Server (NTRS)

Marshall, William M.; Klenhenz, Julie E.

2012-01-01

Recently, liquid oxygen-liquid methane (LO2-LCH4) has been considered as a potential green propellant alternative for future exploration missions. The Propulsion and Cryogenic Advanced Development (PCAD) project was tasked by NASA to develop this propulsion combination to enable safe and cost-effective exploration missions. To date, limited experience with such combinations exist, and as a result a comprehensive test program is critical to demonstrating with the viability of implementing such a system. The NASA Glenn Research Center conducted a test program of a 100-lbf (445-N) reaction control engine (RCE) at the Center s Altitude Combustion Stand (ACS), focusing on altitude testing over a wide variety of operational conditions. The ACS facility includes unique propellant conditioning feed systems (PCFS), which allow precise control of propellant inlet conditions to the engine. Engine performance as a result of these inlet conditions was examined extensively during the test program. This paper is a companion to the previous specific impulse testing paper, and discusses the pulsed-mode operation portion of testing, with a focus on minimum impulse bit (MIB) and repeatable pulse performance. The engine successfully demonstrated target MIB performance at all conditions, as well as successful demonstration of repeatable pulse widths. Some anomalous conditions experienced during testing are also discussed, including a double pulse phenomenon, which was not noted in previous test programs for this engine.

Ground/Flight Test Techniques and Correlation.

DTIC Science & Technology

1983-02-01

Approximately 110 flights have been performed so far and the flight test program is essentially finished . Due to its character as an experimental... finish of 0.25 Vm (10 Win) or better. It was 91.4 em (36.00 in) long, with a cone extension that extended the length to 113.0 cm (44.50 in). Transition...weights were embedded during construction to give a representa- tive mass distribution." The surface finish achieved by this method of construction was

WRAP-RIB antenna technology development

NASA Technical Reports Server (NTRS)

Freeland, R. E.; Garcia, N. F.; Iwamoto, H.

1985-01-01

The wrap-rib deployable antenna concept development is based on a combination of hardware development and testing along with extensive supporting analysis. The proof-of-concept hardware models are large in size so they will address the same basic problems associated with the design fabrication, assembly and test as the full-scale systems which were selected to be 100 meters at the beginning of the program. The hardware evaluation program consists of functional performance tests, design verification tests and analytical model verification tests. Functional testing consists of kinematic deployment, mesh management and verification of mechanical packaging efficiencies. Design verification consists of rib contour precision measurement, rib cross-section variation evaluation, rib materials characterizations and manufacturing imperfections assessment. Analytical model verification and refinement include mesh stiffness measurement, rib static and dynamic testing, mass measurement, and rib cross-section characterization. This concept was considered for a number of potential applications that include mobile communications, VLBI, and aircraft surveillance. In fact, baseline system configurations were developed by JPL, using the appropriate wrap-rib antenna, for all three classes of applications.

Occupant Responses in a Full-Scale Crash Test of the Sikorsky ACAP Helicopter

NASA Technical Reports Server (NTRS)

Jackson, Karen E.; Fasanella, Edwin L.; Boitnott, Richard L.; McEntire, Joseph; Lewis, Alan

2002-01-01

A full-scale crash test of the Sikorsky Advanced Composite Airframe Program (ACAP) helicopter was performed in 1999 to generate experimental data for correlation with a crash simulation developed using an explicit nonlinear, transient dynamic finite element code. The airframe was the residual flight test hardware from the ACAP program. For the test, the aircraft was outfitted with two crew and two troop seats, and four anthropomorphic test dummies. While the results of the impact test and crash simulation have been documented fairly extensively in the literature, the focus of this paper is to present the detailed occupant response data obtained from the crash test and to correlate the results with injury prediction models. These injury models include the Dynamic Response Index (DRI), the Head Injury Criteria (HIC), the spinal load requirement defined in FAR Part 27.562(c), and a comparison of the duration and magnitude of the occupant vertical acceleration responses with the Eiband whole-body acceleration tolerance curve.

Pressurized fluidized-bed component test program shows good promise

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-04-01

The test program described has involved extensive theoretical and laboratory work since 1976, which culminated in a series of PFBC rig tests at the Coal Utilization Research Laboratories (CURL) in Leatherhead, England, and eventually in the design and construction of a component test facility (CTF) at the Oresund Power Station of Sydkraft in Malmo, Sweden. The rig tests are listed. Those preceding the 1000-hr test in 1979 were carried out with and without cooling tubes in the bed, and with different bed characteristics; the main emphasis was on gas clean-up, combustion efficiency, and emission of sulfur and nitrogen oxides. Inmore » these tests, the exhaust gases from the PFBC were passed through a cyclone train containing two cyclones to remove particulate matter, and then through a static cascade that contained parts of turbine blades from an ASEA STAL GT-120 machine. Good performance data, for the most part, are reported. 4 references, 3 figures.« less

Application of Crossover Design for Conducting Rigorous Extension Evaluations

ERIC Educational Resources Information Center

Jayaratne, K. S. U.; Bird, Carolyn L.; McClelland, Jacquelyn W.

2013-01-01

With the increasing demand for accountability of Extension programming, Extension professionals need to apply rigorous evaluation designs. Randomized designs are useful to eliminate selection biases of program participants and to improve the accuracy of evaluation. However, randomized control designs are not practical to apply in Extension program…

Liquid propulsion turbomachinery model testing

NASA Technical Reports Server (NTRS)

Mcdaniels, David M.; Snellgrove, Lauren M.

1992-01-01

For the past few years an extensive experimental program to understand the fluid dynamics of the Space Shuttle Main Engine hot gas manifold has been in progress. This program includes models of the Phase II and II+ manifolds for each of the air and water flow facilities, as well as two different turbine flow paths and two simulated power levels for each manifold. All models are full-scale (geometric). The water models are constructed partially of acrylic to allow flow visualization. The intent of this paper is to discuss the concept, including the test objectives, facilities, and models, and to summarize the data for an example configuration, including static pressure data, flow visualization, and the solution of a specific flow problem.

United States Food and Drug Administration and Department of Defense shelf-life extension program of pharmaceutical products: progress and promise.

PubMed

Khan, Saeed R; Kona, Ravikanth; Faustino, Patrick J; Gupta, Abhay; Taylor, Jeb S; Porter, Donna A; Khan, Mansoor

2014-05-01

The Department of Defense (DoD)-United States Food and Drug Administration (FDA) shelf-life extension program (SLEP) was established in 1986 through an intra-agency agreement between the DoD and the FDA to extend the shelf life of product nearing expiry. During the early stages of development, special attention was paid to program operation, labeling requirements, and the cost benefits associated with this program. In addition to the substantial cost benefits, the program also provides the FDA's Center for Drug Evaluation and Research with significant scientific understanding and pharmaceutical resource. As a result of this unique resource, numerous regulatory research opportunities to improve public health present themselves from this distinctive scientific database, which includes examples of products shelf life, their long-term stability issues, and various physical and chemical tests to identify such failures. The database also serves as a scientific resource for mechanistic understanding and identification of test failures leading to the development of new formulations or more robust packaging. It has been recognized that SLEP is very important in maintaining both national security and public welfare by confirming that the stockpiled pharmaceutical products meet quality standards after the "expiration date" assigned by the sponsor. SLEP research is an example of regulatory science that is needed to best ensure product performance past the original shelf life. The objective of this article is to provide a brief history and background and most importantly the public health benefits of the SLEP. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Appendices to the model description document for a computer program for the emulation/simulation of a space station environmental control and life support system

NASA Technical Reports Server (NTRS)

Yanosy, James L.

1988-01-01

A Model Description Document for the Emulation Simulation Computer Model was already published. The model consisted of a detailed model (emulation) of a SAWD CO2 removal subsystem which operated with much less detailed (simulation) models of a cabin, crew, and condensing and sensible heat exchangers. The purpose was to explore the utility of such an emulation simulation combination in the design, development, and test of a piece of ARS hardware, SAWD. Extensions to this original effort are presented. The first extension is an update of the model to reflect changes in the SAWD control logic which resulted from test. Also, slight changes were also made to the SAWD model to permit restarting and to improve the iteration technique. The second extension is the development of simulation models for more pieces of air and water processing equipment. Models are presented for: EDC, Molecular Sieve, Bosch, Sabatier, a new condensing heat exchanger, SPE, SFWES, Catalytic Oxidizer, and multifiltration. The third extension is to create two system simulations using these models. The first system presented consists of one air and one water processing system. The second consists of a potential air revitalization system.

Appendices to the user's manual for a computer program for the emulation/simulation of a space station environmental control and life support system

NASA Technical Reports Server (NTRS)

Yanosy, James L.

1988-01-01

A user's Manual for the Emulation Simulation Computer Model was published previously. The model consisted of a detailed model (emulation) of a SAWD CO2 removal subsystem which operated with much less detailed (simulation) models of a cabin, crew, and condensing and sensible heat exchangers. The purpose was to explore the utility of such an emulation/simulation combination in the design, development, and test of a piece of ARS hardware - SAWD. Extensions to this original effort are presented. The first extension is an update of the model to reflect changes in the SAWD control logic which resulted from the test. In addition, slight changes were also made to the SAWD model to permit restarting and to improve the iteration technique. The second extension is the development of simulation models for more pieces of air and water processing equipment. Models are presented for: EDC, Molecular Sieve, Bosch, Sabatier, a new condensing heat exchanger, SPE, SFWES, Catalytic Oxidizer, and multifiltration. The third extension is to create two system simulations using these models. The first system presented consists of one air and one water processing system, the second a potential Space Station air revitalization system.

Progress of Ongoing NASA Lithium-Ion Cell Verification Testing for Aerospace Applications

NASA Technical Reports Server (NTRS)

McKissock, Barbara I.; Manzo, Michelle A.; Miller, Thomas B.; Reid, Concha M.; Bennett, William R.; Gemeiner, Russel

2008-01-01

A Lithium-ion Verification and Validation Program with the purpose to assess the capabilities of current aerospace lithium-ion (Li-ion) battery cells to perform in a low-earth-orbit (LEO) regime was initiated in 2002. This program involves extensive characterization and LEO life testing at ten different combinations of depth-of-discharge, temperature, and end-of-charge voltage. The test conditions selected for the life tests are defined as part of a statistically designed test matrix developed to determine the effects of operating conditions on performance and life of Li-ion cells. Results will be used to model and predict cell performance and degradation as a function of test operating conditions. Testing is being performed at the Naval Surface Warfare Center/Crane Division in Crane, Indiana. Testing was initiated in September 2004 with 40 Ah cells from Saft and 30 Ah cells from Lithion. The test program has been expanded with the addition of modules composed of 18650 cells from ABSL Power Solutions in April 2006 and the addition of 50 Ah cells from Mine Safety Appliances Co. (MSA) in June 2006. Preliminary results showing the average voltage and average available discharge capacity for the Saft and Lithion packs at the test conditions versus cycles are presented.

Light Water Reactor Sustainability Program: Evaluation of Localized Cable Test Methods for Nuclear Power Plant Cable Aging Management Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glass, Samuel W.; Fifield, Leonard S.; Hartman, Trenton S.

This Pacific Northwest National Laboratory (PNNL) milestone report describes progress to date on the investigation of nondestructive test (NDE) methods focusing particularly on local measurements that provide key indicators of cable aging and damage. The work includes a review of relevant literature as well as hands-on experimental verification of inspection capabilities. As NPPs consider applying for second, or subsequent, license renewal (SLR) to extend their operating period from 60 years to 80 years, it important to understand how the materials installed in plant systems and components will age during that time and develop aging management programs (AMPs) to assure continuedmore » safe operation under normal and design basis events (DBE). Normal component and system tests typically confirm the cables can perform their normal operational function. The focus of the cable test program is directed toward the more demanding challenge of assuring the cable function under accident or DBE. Most utilities already have a program associated with their first life extension from 40 to 60 years. Regrettably, there is neither a clear guideline nor a single NDE that can assure cable function and integrity for all cables. Thankfully, however, practical implementation of a broad range of tests allows utilities to develop a practical program that assures cable function to a high degree. The industry has adopted 50% elongation at break (EAB) relative to the un-aged cable condition as the acceptability standard. All tests are benchmarked against the cable EAB test. EAB is a destructive test so the test programs must apply an array of other NDE tests to assure or infer the overall set of cable’s system integrity. These cable NDE programs vary in rigor and methodology. As the industry gains experience with the efficacy of these programs, it is expected that implementation practice will converge to a more common approach. This report addresses the range of local NDE cable tests that are or could be practically implemented in a field test situation. These tests include: visual, infrared thermography, interdigital capacitance, indenter, relaxation time indenter, dynamic mechanical analyzer, infrared/near-infrared spectrometry, ultrasound, and distributed fiber optic temperature measurement.« less

Use of ADR in Extension Public Policy Education Programs and Roles Extension Can Play in Dispute Resolution.

ERIC Educational Resources Information Center

Danielson, Leon E.; Garber, Simon K.

The extension educator in public policy education and alternative dispute resolution (ADR) has many roles from which to choose. These include information provider, technical advisor, convener, facilitator and program developer. The increased importance of issues programming and the increased priority given to measurement of results are creating…

Using Maps in Web Analytics to Evaluate the Impact of Web-Based Extension Programs

ERIC Educational Resources Information Center

Veregin, Howard

2015-01-01

Maps can be a valuable addition to the Web analytics toolbox for Extension programs that use the Web to disseminate information. Extension professionals use Web analytics tools to evaluate program impacts. Maps add a unique perspective through visualization and analysis of geographic patterns and their relationships to other variables. Maps can…

A Needs Assessment of Aquaculture Extension Agents, Specialists, and Program Administrators in Extension Programming

ERIC Educational Resources Information Center

Schwarz, Michael H.; Gibson, Jerry

2010-01-01

The study reported here identified continuing education and training needs of aquaculture Extension agents, specialists, and program administrators in 10 competency areas relating to the need for continuing education or training. Fourteen resources on the AquaNIC Web site were also evaluated, as was the efficacy of the AQUA-EXT listserv. Data were…

Cost Effectiveness Ratio: Evaluation Tool for Comparing the Effectiveness of Similar Extension Programs

ERIC Educational Resources Information Center

Jayaratne, K. S. U.

2015-01-01

Extension educators have been challenged to be cost effective in their educational programming. The cost effectiveness ratio is a versatile evaluation indicator for Extension educators to compare the cost of achieving a unit of outcomes or educating a client in similar educational programs. This article describes the cost effectiveness ratio and…

Stable White Coatings

NASA Technical Reports Server (NTRS)

Zerlaut, Gene A.; Gilligan, J. E.; Harada, Y.

1965-01-01

In a previous research program for the Jet Propulsion- Laboratory, extensive studies led to the development and specifications of three zinc oxide-pigmented thermal-control coatings. The principal objectives of this program are: improvement of the three paints (as engineering materials), determination of the validity of our accelerated space-simulation testing, and continuation of the zinc oxide photolysis studies begun in the preceding program. Specific tasks that are discussed include: improvement of potassium silicate coatings as engineering materials and elucidation of their storage and handling problems; improvement of methyl silicone coatings as engineering materials; studies of zinc oxide photolysis to establish reasons for the observed stability of zinc oxide; and determination of space-simulation parameters such as long-term stability (to 8000 ESH), effect of coating surface temperature on the rate of degradation, and validity of accelerated testing (by reciprocity and wavelength dependency studies).

A Combined Intervention Targeting Both Teachers' and Students' Social-Emotional Skills: Preliminary Evaluation of Students' Outcomes

ERIC Educational Resources Information Center

Iizuka, Cristina Akiko; Barrett, Paula M.; Gillies, Robyn; Cook, Clayton R.; Marinovic, Welber

2014-01-01

The literature indicates increasing evidence showing the benefits of classroom-based, universal preventive interventions for mental health and the link between social and emotional learning and academic performance. The FRIENDS program has been extensively tested and has showed promising results not only for preventing childhood anxiety, but also…

A Constitutional System of Educational Accountability. Part III. [Sound Basic Education Task Force Proposal

ERIC Educational Resources Information Center

Campaign for Fiscal Equity, Inc., 2004

2004-01-01

In recent years, New York, like most other states, has adopted a set of challenging educational standards that are geared to preparing all students to be capable citizens and to compete in the global marketplace. The state has also implemented extensive Regents testing programs to measure student progress toward meeting the standards. These…

Flight instrument and telemetry response and its inversion

NASA Technical Reports Server (NTRS)

Weinberger, M. R.

1971-01-01

Mathematical models of rate gyros, servo accelerometers, pressure transducers, and telemetry systems were derived and their parameters were obtained from laboratory tests. Analog computer simulations were used extensively for verification of the validity for fast and large input signals. An optimal inversion method was derived to reconstruct input signals from noisy output signals and a computer program was prepared.

Design and fabrication of the NASA HL-20 support cradle and interior mockup

NASA Technical Reports Server (NTRS)

Exum, Thurman

1991-01-01

An extensive test program involving analysis in both the horizontal and vertical attitudes of the HL-20 will be conducted by NASA-Langley. This necessitated the fabrication of a steel support cradle for the composite Personnel Launch System (PLS) model and an internal mockup to simulate the pilot and passenger compartments.

5 Steps to Food Preservation Program Meets the Needs of Idaho Families

ERIC Educational Resources Information Center

Dye, Lorie; Hoffman, Katie

2014-01-01

University of Idaho FCS Extension Educators in southeastern Idaho developed a five-lesson condensed version of safe food preservation classes, driven by participants' interest to meet the needs of everyday home preservers. A post-test survey revealed that participants took the course to be self-reliant, use their own produce, and be in control of…

Verifying Diagnostic Software

NASA Technical Reports Server (NTRS)

Lindsey, Tony; Pecheur, Charles

2004-01-01

Livingstone PathFinder (LPF) is a simulation-based computer program for verifying autonomous diagnostic software. LPF is designed especially to be applied to NASA s Livingstone computer program, which implements a qualitative-model-based algorithm that diagnoses faults in a complex automated system (e.g., an exploratory robot, spacecraft, or aircraft). LPF forms a software test bed containing a Livingstone diagnosis engine, embedded in a simulated operating environment consisting of a simulator of the system to be diagnosed by Livingstone and a driver program that issues commands and faults according to a nondeterministic scenario provided by the user. LPF runs the test bed through all executions allowed by the scenario, checking for various selectable error conditions after each step. All components of the test bed are instrumented, so that execution can be single-stepped both backward and forward. The architecture of LPF is modular and includes generic interfaces to facilitate substitution of alternative versions of its different parts. Altogether, LPF provides a flexible, extensible framework for simulation-based analysis of diagnostic software; these characteristics also render it amenable to application to diagnostic programs other than Livingstone.

Defining Audience Segments for Extension Programming Using Reported Water Conservation Practices

ERIC Educational Resources Information Center

Monaghan, Paul; Ott, Emily; Wilber, Wendy; Gouldthorpe, Jessica; Racevskis, Laila

2013-01-01

A tool from social marketing can help Extension agents understand distinct audience segments among their constituents. Defining targeted audiences for Extension programming is a first step to influencing behavior change among the public. An online survey was conducted using an Extension email list for urban households receiving a monthly lawn and…

The Impact of Tour-Based Diversity Programming on County Extension Personnel and Programs

ERIC Educational Resources Information Center

Shaklee, Harriet; Luckey, Brian; Tifft, Kathee

2014-01-01

This article explores the effect that planning and conducting an intensive multi-day, tour-based diversity workshop can have on the professional development and Extension work of the county Extension educators involved. Survey data was collected from the county Extension educators who planned workshops throughout Idaho. Educators reported that the…

EXTENSION IN RURAL COMMUNITIES, A MANUAL FOR AGRICULTURAL AND HOME EXTENSION WORKERS.

ERIC Educational Resources Information Center

SAVILE, A.H.

A PRACTICAL GUIDE IS PROVIDED FOR TRAINERS OF ADVISORY AND EXTENSION WORKERS AND LOCAL LEADERS IN AGRICULTURE AND COMMUNITY DEVELOPMENT IN DEVELOPING NATIONS. BASIC PRINCIPLES OF AGRICULTURAL EXTENSION, COMMUNITY SURVEY PROCEDURES, ELEMENTS OF PROGRAM PLANNING, AND PURPOSES AND METHODS OF PROGRAM EVALUATION ARE DESCRIBED. THEN FOLLOW TWO CHAPTERS…

Developing a Marketing Mind-Set: Training and Mentoring for County Extension Employees

ERIC Educational Resources Information Center

Sneed, Christopher T.; Elizer, Amy Hastings; Hastings, Shirley; Barry, Michael

2016-01-01

Marketing the county Extension program is a critical responsibility of the entire county staff. This article describes a unique peer-to-peer training and mentoring program developed to assist county Extension staff in improving marketing skills and successfully developing and implementing a county Extension marketing plan. Data demonstrating…

Fuel cell technology program

NASA Technical Reports Server (NTRS)

1973-01-01

A fuel cell technology program was established to advance the state-of-the-art of hydrogen-oxygen fuel cells using low temperature, potassium hydroxide electrolyte technology as the base. Program tasks are described consisting of baseline cell design and stack testing, hydrogen pump design and testing, and DM-2 powerplant testing and technology extension efforts. A baseline cell configuration capable of a minimum of 2000 hours of life was defined. A 6-cell prototype stack, incorporating most of the scheme cell features, was tested for a total of 10,497 hours. A 6-cell stack incorporating all of the design features was tested. The DM-2 powerplant with a 34 cell stack, an accessory section packaged in the basic configuration anticipated for the space shuttle powerplant and a powerplant control unit, was defined, assembled, and tested. Cells were used in the stack and a drag-type hydrogen pump was installed in the accessory section. A test program was established, in conjunction with NASA/JSC, based on space shuttle orbiter mission. A 2000-hour minimum endurance test and a 5000-hour goal were set and the test started on August 8, 1972. The 2000-hour milestone was completed on November 3, 1972. On 13 March 1973, at the end of the thirty-first simulated seven-day mission and 5072 load hours, the test was concluded, all goals having been met. At this time, the DM-2 was in excellent condition and capable of additional endurance.

Evaluation of fuel injection configurations to control carbon and soot formation in small GT combustors

NASA Technical Reports Server (NTRS)

Rosfjord, T. J.; Briehl, D.

1982-01-01

An experimental program to investigate hardware configurations which attempt to minimize carbon formation and soot production without sacrificing performance in small gas turbine combustors has been conducted at the United Technologies Research Center. Four fuel injectors, embodying either airblast atomization, pressure atomization, or fuel vaporization techniques, were combined with nozzle air swirlers and injector sheaths, and evaluated at test conditions which included and extended beyond standard small gas turbine combustor operation. Extensive testing was accomplished with configurations embodying either a spill return or a T-vaporizer injector. Minimal carbon deposits were observed on the spill return nozzle for tests using either Jet A or ERBS test fuel. A more extensive film of soft carbon was observed on the vaporizer after operation at standard engine conditions, with large carbonaceous growths forming on the device during off-design operation at low combustor inlet temperature. Test results indicated that smoke emission levels depended on the combustor fluid mechanics (especially the mixing rates near the injector), the atomization quality of the injector and the fuel hydrogen content.

On impact testing of subsize Charpy V-notch type specimens

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mikhail, A.S.; Nanstad, R.K.

1994-12-31

The potential for using subsize specimens to determine the actual properties of reactor pressure vessel steels is receiving increasing attention for improved vessel condition monitoring that could be beneficial for light-water reactor plant-life extension. This potential is made conditional upon, on the one hand, by the possibility of cutting samples of small volume from the internal surface of the pressure vessel for determination of actual properties of the operating pressure vessel. The plant-life extension will require supplemental surveillance data that cannot be provided by the existing surveillance programs. Testing of subsize specimens manufactured from broken halves of previously tested surveillancemore » Charpy V-notch (CVN) specimens offers an attractive means of extending existing surveillance programs. Using subsize CVN type specimens requires the establishment of a specimen geometry that is adequate to obtain a ductile-to-brittle transition curve similar to that obtained from full-size specimens. This requires the development of a correlation of transition temperature and upper-shelf toughness between subsize and full-size specimens. The present study was conducted under the Heavy-Section Steel Irradiation Program. Different published approaches to the use of subsize specimens were analyzed and five different geometries of subsize specimens were selected for testing and evaluation. The specimens were made from several types of pressure vessel steels with a wide range of yield strengths, transition temperatures, and upper-shelf energies (USEs). Effects of specimen dimensions, including depth, angle, and radius of notch have been studied. The correlation of transition temperature determined from different types of subsize specimens and the full-size specimen is presented. A new procedure for transforming data from subsize specimens was developed and is presented.« less

Real-time maritime scene simulation for ladar sensors

NASA Astrophysics Data System (ADS)

Christie, Chad L.; Gouthas, Efthimios; Swierkowski, Leszek; Williams, Owen M.

2011-06-01

Continuing interest exists in the development of cost-effective synthetic environments for testing Laser Detection and Ranging (ladar) sensors. In this paper we describe a PC-based system for real-time ladar scene simulation of ships and small boats in a dynamic maritime environment. In particular, we describe the techniques employed to generate range imagery accompanied by passive radiance imagery. Our ladar scene generation system is an evolutionary extension of the VIRSuite infrared scene simulation program and includes all previous features such as ocean wave simulation, the physically-realistic representation of boat and ship dynamics, wake generation and simulation of whitecaps, spray, wake trails and foam. A terrain simulation extension is also under development. In this paper we outline the development, capabilities and limitations of the VIRSuite extensions.

Agricultural Extension--Programming the Work.

ERIC Educational Resources Information Center

Smith, G. A.

This paper outlines the concept of "program" and one set of elements that are considered to make up the program planning process in agricultural extension, and an example of practical program planning in Rhodesia is given. Although there is a wide variety of meanings attached to the term "program" in adult education, it has…

School-Based Peer Mediation Programs: A Natural Extension of Developmental Guidance Programs.

ERIC Educational Resources Information Center

Robertson, Gwendolyn

School-based peer mediation programs are natural extensions of the kindergarten-grade 12 developmental guidance programs. Peer mediation programs not only provide schools with alternatives to traditional discipline practices, but also teach students important life skills. Existing research on peer mediation is very limited, yet promising. This…

Collaboration for prevention of chronic disease in Kentucky: the Health Education Through Extension Leaders (HEEL) program.

PubMed

Riley, Peggy

2008-09-01

Health Education Through Extension Leaders (HEEL) is one of the solutions the University of Kentucky College of Agriculture has created to address the problem of chronic disease in Kentucky. Building on the land grant model for education, outreach, and prevention, HEEL collaborates and partners with the academic health centers, area health education centers, the Center for Rural Health, the Kentucky Cancer Program, the Markey Cancer Center, the University of Kansas Wellness Program, and the Kentucky Cabinet for Health and Family Services to implement research-based preventive programs to the county extension agents across Kentucky. Extension agents are an instrumental bridge between the communities across Kentucky and the educational resources provided by the HEEL program.

Type Safe Extensible Programming

NASA Astrophysics Data System (ADS)

Chae, Wonseok

2009-10-01

Software products evolve over time. Sometimes they evolve by adding new features, and sometimes by either fixing bugs or replacing outdated implementations with new ones. When software engineers fail to anticipate such evolution during development, they will eventually be forced to re-architect or re-build from scratch. Therefore, it has been common practice to prepare for changes so that software products are extensible over their lifetimes. However, making software extensible is challenging because it is difficult to anticipate successive changes and to provide adequate abstraction mechanisms over potential changes. Such extensibility mechanisms, furthermore, should not compromise any existing functionality during extension. Software engineers would benefit from a tool that provides a way to add extensions in a reliable way. It is natural to expect programming languages to serve this role. Extensible programming is one effort to address these issues. In this thesis, we present type safe extensible programming using the MLPolyR language. MLPolyR is an ML-like functional language whose type system provides type-safe extensibility mechanisms at several levels. After presenting the language, we will show how these extensibility mechanisms can be put to good use in the context of product line engineering. Product line engineering is an emerging software engineering paradigm that aims to manage variations, which originate from successive changes in software.

F/A-18 1/9th scale model tail buffet measurements

NASA Technical Reports Server (NTRS)

Martin, C. A.; Glaister, M. K.; Maclaren, L. D.; Meyn, L. A.; Ross, J.

1991-01-01

Wind tunnel tests were carried out on a 1/9th scale model of the F/A-18 at high angles of attack to investigate the characteristics of tail buffet due to bursting of the wing leading edge extension (LEX) vortices. The tests were carried out at the Aeronautical Research Laboratory low-speed wind tunnel facility and form part of a collaborative activity with NASA Ames Research Center, organized by The Technical Cooperative Program (TTCP). Information from the program will be used in the planning of similar collaborative tests, to be carried out at NASA Ames, on a full-scale aircraft. The program covered the measurement of unsteady pressures and fin vibration for cases with and without the wing LEX fences fitted. Fourier transform methods were used to analyze the unsteady data, and information on the spatial and temporal content of the vortex burst pressure field was obtained. Flow visualization of the vortex behavior was carried out using smoke and a laser light sheet technique.

Using EnergyPlus for California Title-24 compliancecalculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Joe; Bourassa, Norman; Buhl, Fred

2006-08-26

For the past decade, the non-residential portion of California's Title-24 building energy standard has relied on DOE-2.1E as the reference computer simulation program for development as well as compliance. However, starting in 2004, the California Energy Commission has been evaluating the possible use of Energy Plus as the reference program in future revisions of Title-24. As part of this evaluation, the authors converted the Alternate Compliance Method (ACM) certification test suite of 150 DOE-2 files to Energy Plus, and made parallel DOE-2 and Energy Plus runs for this extensive set of test cases. A customized version of DOE-2.1E named doe2epmore » was developed to automate the conversion process. This paper describes this conversion process, including the difficulties in establishing an apples-to-apples comparison between the two programs, and summarizes how the DOE-2 and Energy Plus results compare for the ACM test cases.« less

Application of IMPLAN to Extension Programs: Economic Impacts of the University of Arizona Cooperative Extension SNAP-Ed Spending

ERIC Educational Resources Information Center

Kerna, Ashley; Frisvold, George; Jacobs, Laurel; Farrell, Vanessa A.; Houtkooper, Linda; Misner, Scottie

2015-01-01

Many Extension programs are turning to the input-output software IMPLAN to demonstrate economic impacts. IMPLAN is a powerful tool that can be used to estimate the total economic activity associated with an industry, event, or policy. One possible application, therefore, is to use program spending data to estimate the economic effects of…

15 CFR 292.1 - Program description.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

15 CFR 292.1 - Program description.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

15 CFR 292.1 - Program description.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

15 CFR 292.1 - Program description.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

15 CFR 292.1 - Program description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION...)(3) and 278l), as amended, NIST will provide financial assistance to develop the infrastructure of the national manufacturing extension system. Under the NIST Manufacturing Extension Partnership (MEP...

Development of the Astrobee F sounding rocket system.

NASA Technical Reports Server (NTRS)

Jenkins, R. B.; Taylor, J. P.; Honecker, H. J., Jr.

1973-01-01

The development of the Astrobee F sounding rocket vehicle through the first flight test at NASA-Wallops Station is described. Design and development of a 15 in. diameter, dual thrust, solid propellant motor demonstrating several new technology features provided the basis for the flight vehicle. The 'F' motor test program described demonstrated the following advanced propulsion technology: tandem dual grain configuration, low burning rate HTPB case-bonded propellant, and molded plastic nozzle. The resultant motor integrated into a flight vehicle was successfully flown with extensive diagnostic instrumentation.-

Summary of Altitude Pulse Testing of a 100-lbf L02/LCH4 Reaction Control Engine

NASA Technical Reports Server (NTRS)

Marshall, William M.; Kleinhenz, Julie E.

2011-01-01

Recently, liquid oxygen-liquid methane (LO2/LCH4) has been considered as a potential "green" propellant alternative for future exploration missions. The Propulsion and Cryogenic Advanced Development (PCAD) project has been tasked by NASA to develop this propulsion combination to enable safe and cost effective exploration missions. To date, limited experience with such combinations exist, and as a result a comprehensive test program is critical to demonstrating the viability of implementing such a system. The NASA Glenn Research Center has conducted a test program of a 100-lbf (445-N) reaction control engine (RCE) at the center s Altitude Combustion Stand (ACS), focusing on altitude testing over a wide variety of operational conditions. The ACS facility includes a unique propellant conditioning feed system (PCFS) which allows precise control of propellant inlet conditions to the engine. Engine performance as a result of these inlet conditions was examined extensively during the test program. This paper is a companion to the previous specific impulse testing paper, and discusses the pulsed mode operation portion of testing, with a focus on minimum impulse bit (I-bit) and repeatable pulse performance. The engine successfully demonstrated target minimum impulse bit performance at all conditions, as well as successful demonstration of repeatable pulse widths. Some anomalous conditions experienced during testing are also discussed, including a double pulse phenomenon which was not noted in previous test programs for this engine.

Solvent Replacement for Hydrochlorofluorocarbon-225 for Cleaning Oxygen System Components

NASA Technical Reports Server (NTRS)

Mitchell, M. A.; Lowrey, N. M.

2017-01-01

This Technical Memorandum is the result of a 2-year project funded by the Defense Logistics Agency-Aviation, Hazardous Minimization and Green Products Branch, to identify and test two candidate solvents to replace hydrochlorofluorocarbon-225 (HCFC-225) for cleaning oxygen systems. The solvents were also compared to a second solvent composed predominantly of perfluorobutyl iodide (PFBI), which had received limited approval by the United States Air Force (USAF) for hand wipe cleaning of components for aviators’ breathing oxygen systems. The tests performed for this study were based on those reported in AFRL-ML-WP-TR-2003-4040, “The Wipe Solvent Program,” the test program used to qualify Ikon® Solvent P for USAF applications.The study was completed in August 2014, prior to the completion of a more extensive study funded by the NASA Rocket Propulsion Test (RPT) program. The results of the RPT project are reported in NASA/TP-2015-18207, “Replacement of Hydrochlorofluorocarbon–225 Solvent for Cleaning and Verification Sampling of NASA Propulsion Oxygen Systems Hardware, Ground Support Equipment, and Associated Test Systems.” The test methods used in this study for nonvolatile residue (NVR) background, materials compatibility, and cleaning effectiveness were different than those used for the RPT project; a smaller set of materials and contaminants were tested. The tests for this study were complementary to and provided supplementary information for the down-selection process during the course of the test program reported in NASA/TP-2015-218207.

Utility of the Living (Well Through) Intergenerational Fitness and Exercise Program as a County-Delivered Extension Program

ERIC Educational Resources Information Center

Sowle, Ashleigh J.; Francis, Sarah L.; Margrett, Jennifer A.; Franke, Warren D.

2016-01-01

Rural-residing older adults are not participating in regular physical activity. Extension is in an excellent position to fill this programming void through transdisciplinary programming such as the Living (well through) Intergenerational Fitness and Exercise (LIFE) program. Qualitative evaluation was conducted to assess the LIFE program's utility…

From Paper to Production to Test: An Update on NASA's J-2X Engine for Exploration

NASA Technical Reports Server (NTRS)

Kynard, Michael

2011-01-01

The NASA/industry team responsible for developing the J-2X upper stage engine for the Space Launch System (SLS) Program has made significant progress toward moving beyond the design phase and into production, assembly, and test of development hardware. The J-2X engine exemplifies the SLS Program goal of using proven technology and experience from more than 50 years of United States spaceflight experience combined with modern manufacturing processes and approaches. It will power the second stage of the fully evolved SLS Program launch vehicle that will enable a return to human exploration of space beyond low earth orbit. Pratt & Whitney Rocketdyne (PWR) is under contract to develop and produce the engine, leveraging its flight-proven LH2/LOX, gas generator cycle J-2 and RS-68 engine capabilities, recent experience with the X-33 aerospike XRS-2200 engine, and development knowledge of the J-2S tap-off cycle engine. The J- 2X employs a gas generator operating cycle designed to produce 294,000 pounds of vacuum thrust in primary operating mode with its full nozzle extension. With a truncated nozzle extension suitable to support engine clustering on the stage, the nominal vacuum thrust level in primary mode is 285,000 pounds. It also has a secondary mode, during which it operates at 80 percent thrust by altering its mixture ratio. The J-2X development philosophy is based on proven hardware, an aggressive development schedule, and early risk reduction. NASA Marshall Space Flight Center (MSFC) and PWR began development of the J-2X in June 2006. The government/industry team of more than 600 people within NASA and PWR successfully completed the Critical Design Review (CDR) in November 2008, following extensive risk mitigation testing. Assembly of the first development engine was completed in May 2011 and the first engine test was conducted at the NASA Stennis Space Center (SSC), test stand A2, on 14 July 2011. Testing of the first development engine will continue through the autumn of 2011, be paused for test stand modifications to the passive diffuser, and then restart in the spring of 2012. This testing will be followed by specialized powerpack testing intended to examine the design and operating margins of the engine turbomachinery. The development plan beyond this point leads through more system-level, engine testing of several samples, analytical model validation activities, functional and performance verification, and then ultimate certification to support human spaceflight. This paper will discuss the J-2X development background, provide top-level information on design and development planning, and will explore some of the development challenges and mitigation activities pursued to date.

Large-scale academic achievement testing of deaf and hard-of-hearing students: past, present, and future.

PubMed

Qi, Sen; Mitchell, Ross E

2012-01-01

The first large-scale, nationwide academic achievement testing program using Stanford Achievement Test (Stanford) for deaf and hard-of-hearing children in the United States started in 1969. Over the past three decades, the Stanford has served as a benchmark in the field of deaf education for assessing student academic achievement. However, the validity and reliability of using the Stanford for this special student population still require extensive scrutiny. Recent shifts in educational policy environment, which require that schools enable all children to achieve proficiency through accountability testing, warrants a close examination of the adequacy and relevance of the current large-scale testing of deaf and hard-of-hearing students. This study has three objectives: (a) it will summarize the historical data over the last three decades to indicate trends in academic achievement for this special population, (b) it will analyze the current federal laws and regulations related to educational testing and special education, thereby identifying gaps between policy and practice in the field, especially identifying the limitations of current testing programs in assessing what deaf and hard-of-hearing students know, and (c) it will offer some insights and suggestions for future testing programs for deaf and hard-of-hearing students.

A randomized controlled trial for the effect of passive stretching on measures of hamstring extensibility, passive stiffness, strength, and stretch tolerance.

PubMed

Marshall, Paul W M; Cashman, Anthony; Cheema, Birinder S

2011-11-01

To measure hamstring extensibility, stiffness, stretch tolerance, and strength following a 4-week passive stretching program. Randomized controlled trial. Twenty-two healthy participants were randomly assigned to either a 4-week stretching program consisting of 4 hamstring and hip stretches performed 5 times per week, or a non-stretching control group. Hamstring extensibility and stiffness were measured before and after training using the instrumented straight leg raise test (iSLR). Stretch tolerance was measured as the pain intensity (visual analog scale; VAS) elicited during the maximal stretch. Hamstring strength was measured using isokinetic dynamometry at 30 and 120° s(-1). Hamstring extensibility increased by 20.9% in the intervention group following 4 weeks of training (p<0.001; d=0.86). Passive stiffness was reduced by 31% in the intervention group (p<0.05; d=-0.89). Stretch tolerance VAS scores were not different between groups at either time point, and no changes were observed following training. There were no changes in hamstring concentric strength measured at 30 and 120° s(-1). Passive stretching increases hamstring extensibility and decreases passive stiffness, with no change in stretch tolerance defined by pain intensity during the stretch. Compared to previous research, the volume of stretching was higher in this study. The volume of prescribed stretching is important for eliciting the strong clinical effect observed in this study. Copyright © 2011 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Measurement of fault latency in a digital avionic mini processor, part 2

NASA Technical Reports Server (NTRS)

Mcgough, J.; Swern, F.

1983-01-01

The results of fault injection experiments utilizing a gate-level emulation of the central processor unit of the Bendix BDX-930 digital computer are described. Several earlier programs were reprogrammed, expanding the instruction set to capitalize on the full power of the BDX-930 computer. As a final demonstration of fault coverage an extensive, 3-axis, high performance flght control computation was added. The stages in the development of a CPU self-test program emphasizing the relationship between fault coverage, speed, and quantity of instructions were demonstrated.

Research in computer science

NASA Technical Reports Server (NTRS)

Ortega, J. M.

1984-01-01

Several short summaries of the work performed during this reporting period are presented. Topics discussed in this document include: (1) resilient seeded errors via simple techniques; (2) knowledge representation for engineering design; (3) analysis of faults in a multiversion software experiment; (4) implementation of parallel programming environment; (5) symbolic execution of concurrent programs; (6) two computer graphics systems for visualization of pressure distribution and convective density particles; (7) design of a source code management system; (8) vectorizing incomplete conjugate gradient on the Cyber 203/205; (9) extensions of domain testing theory and; (10) performance analyzer for the pisces system.

A Framework for Identifying Implementation Issues Affecting Extension Human Sciences Programming

ERIC Educational Resources Information Center

Abell, Ellen; Cummings, Rebekah; Duke, Adrienne M.; Marshall, Jennifer Wells

2015-01-01

Extension programs based on identified needs, relevant theory, and solid research too often fail to realize their objectives. Program implementation is acknowledged to contribute to program effectiveness, yet systematic attention has not been paid to the array of implementation issues that can complicate achieving program goals. We developed the…

Next Generation Active Buffet Suppression System

NASA Technical Reports Server (NTRS)

Galea, Stephen C.; Ryall, Thomas G.; Henderson, Douglas A.; Moses, Robert W.; White, Edward V.; Zimcik, David G.

2003-01-01

Buffeting is an aeroelastic phenomenon that is common to high performance aircraft, especially those with twin vertical tails like the F/A-18, at high angles of attack. These loads result in significant random stresses, which may cause fatigue damage leading to restricted capabilities and availability of the aircraft. This paper describes an international collaborative research activity among Australia, Canada and the United States involving the use of active structural control to alleviate the damaging structural response to these loads. The research program is being co-ordinated by the Air Force Research Laboratory (AFRL) and is being conducted under the auspices of The Technical Cooperative Program (TTCP). This truly unique collaborative program has been developed to enable each participating country to contribute resources toward a program that coalesces a broad range of technical knowledge and expertise into a single investigation. This collaborative program is directed toward a full-scale test of an F/A-18 empennage, which is an extension of an earlier initial test. The current program aims at applying advanced directional piezoactuators, the aircraft rudder, switch mode amplifiers and advanced control strategies on a full-scale structure to demonstrate the enhanced performance and capability of the advanced active BLA control system in preparation for a flight test demonstration.

PSsolver: A Maple implementation to solve first order ordinary differential equations with Liouvillian solutions

NASA Astrophysics Data System (ADS)

Avellar, J.; Duarte, L. G. S.; da Mota, L. A. C. P.

2012-10-01

We present a set of software routines in Maple 14 for solving first order ordinary differential equations (FOODEs). The package implements the Prelle-Singer method in its original form together with its extension to include integrating factors in terms of elementary functions. The package also presents a theoretical extension to deal with all FOODEs presenting Liouvillian solutions. Applications to ODEs taken from standard references show that it solves ODEs which remain unsolved using Maple's standard ODE solution routines. New version program summary Program title: PSsolver Catalogue identifier: ADPR_v2_0 Program summary URL: http://cpc.cs.qub.ac.uk/summaries/ADPR_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 2302 No. of bytes in distributed program, including test data, etc.: 31962 Distribution format: tar.gz Programming language: Maple 14 (also tested using Maple 15 and 16). Computer: Intel Pentium Processor P6000, 1.86 GHz. Operating system: Windows 7. RAM: 4 GB DDR3 Memory Classification: 4.3. Catalogue identifier of previous version: ADPR_v1_0 Journal reference of previous version: Comput. Phys. Comm. 144 (2002) 46 Does the new version supersede the previous version?: Yes Nature of problem: Symbolic solution of first order differential equations via the Prelle-Singer method. Solution method: The method of solution is based on the standard Prelle-Singer method, with extensions for the cases when the FOODE contains elementary functions. Additionally, an extension of our own which solves FOODEs with Liouvillian solutions is included. Reasons for new version: The program was not running anymore due to changes in the latest versions of Maple. Additionally, we corrected/changed some bugs/details that were hampering the smoother functioning of the routines. Summary of revisions: • As time went by, many commands in Maple were deprecated. So, in order to make the program able to run with the newer versions, we have checked and changed some of those. For instance, the command sum had changed, and some program lines were substituted so that the package works properly. • In the old version we must supply the degree of the Darboux polynomials we want to determine. In the present version the user can set the degree by typing Deg = number in the command call (e.g., PSsolve(ode, Deg =3); telling the command PSsolve that it must use Darboux polynomials of degree up to three). If the user does not specify the degree, the routines use, as default, the degree 1. Restrictions: If the integrating factor for the FOODE under consideration has factors of high degree in the dependent and independent variables and in the elementary functions appearing in the FOODE, the package may spend a long time finding the solution. Also, when dealing with FOODEs containing elementary functions, it is essential that the algebraic dependency between them is recognized. If that does not happen, our program can miss some solutions. Unusual features: Our implementation of the Prelle-Singer approach not only solves FOODEs, but can also be used as a research tool that allows the user to follow all the steps of the procedure. For example, the Darboux polynomials (eigenpolynomials) of the D-operator associated with a FOODE (see Section 4) can be calculated. In addition, our package is successful in solving FOODEs that were not solved by some of the most commonly available solvers. Finally, our package implements a theoretical extension (for details, see [1,2]) to the original Prelle-Singer approach that enhances its scope, allowing it to tackle some FOODEs whose solutions involve non-elementary Liouvillian functions. Running time: This depends strongly on the FOODE, but usually under 2 seconds when running our 'arena' test file: The non linear FOODEs presented in the book by Kamke [3]. These times were obtained using an Intel Pentium Processor P6000, 1.86 GHz, with 4 GB RAM. References: [1] M. Singer, Liouvillian first integrals of differential equations, Trans. Amer. Math. Soc. 333 (1992) 673-688. [2] L.G.S. Duarte, S.E.S. Duarte, L.A.C.P. da Mota, J.E.F. Skea, A method to tackle first order ordinary differential equations with Liouvilian functions in the solution, J. Phys. A: Math. Gen. Inglaterra 35 (17) (2002) 3899-3910. [3] E. Kamke, Differentialgleichungen: Lösungsmethoden und Lösungen, Chelsea Publishing Co., New York, 1959.

BEST3D user's manual: Boundary Element Solution Technology, 3-Dimensional Version 3.0

NASA Technical Reports Server (NTRS)

1991-01-01

The theoretical basis and programming strategy utilized in the construction of the computer program BEST3D (boundary element solution technology - three dimensional) and detailed input instructions are provided for the use of the program. An extensive set of test cases and sample problems is included in the manual and is also available for distribution with the program. The BEST3D program was developed under the 3-D Inelastic Analysis Methods for Hot Section Components contract (NAS3-23697). The overall objective of this program was the development of new computer programs allowing more accurate and efficient three-dimensional thermal and stress analysis of hot section components, i.e., combustor liners, turbine blades, and turbine vanes. The BEST3D program allows both linear and nonlinear analysis of static and quasi-static elastic problems and transient dynamic analysis for elastic problems. Calculation of elastic natural frequencies and mode shapes is also provided.

A best practice fall prevention exercise program to improve balance, strength / power, and psychosocial health in older adults: study protocol for a randomized controlled trial.

PubMed

Gschwind, Yves J; Kressig, Reto W; Lacroix, Andre; Muehlbauer, Thomas; Pfenninger, Barbara; Granacher, Urs

2013-10-09

With increasing age neuromuscular deficits (e.g., sarcopenia) may result in impaired physical performance and an increased risk for falls. Prominent intrinsic fall-risk factors are age-related decreases in balance and strength / power performance as well as cognitive decline. Additional studies are needed to develop specifically tailored exercise programs for older adults that can easily be implemented into clinical practice. Thus, the objective of the present trial is to assess the effects of a fall prevention program that was developed by an interdisciplinary expert panel on measures of balance, strength / power, body composition, cognition, psychosocial well-being, and falls self-efficacy in healthy older adults. Additionally, the time-related effects of detraining are tested. Healthy old people (n = 54) between the age of 65 to 80 years will participate in this trial. The testing protocol comprises tests for the assessment of static / dynamic steady-state balance (i.e., Sharpened Romberg Test, instrumented gait analysis), proactive balance (i.e., Functional Reach Test; Timed Up and Go Test), reactive balance (i.e., perturbation test during bipedal stance; Push and Release Test), strength (i.e., hand grip strength test; Chair Stand Test), and power (i.e., Stair Climb Power Test; countermovement jump). Further, body composition will be analysed using a bioelectrical impedance analysis system. In addition, questionnaires for the assessment of psychosocial (i.e., World Health Organisation Quality of Life Assessment-Bref), cognitive (i.e., Mini Mental State Examination), and fall risk determinants (i.e., Fall Efficacy Scale - International) will be included in the study protocol. Participants will be randomized into two intervention groups or the control / waiting group. After baseline measures, participants in the intervention groups will conduct a 12-week balance and strength / power exercise intervention 3 times per week, with each training session lasting 30 min. (actual training time). One intervention group will complete an extensive supervised training program, while the other intervention group will complete a short version ('3 times 3') that is home-based and controlled by weekly phone calls. Post-tests will be conducted right after the intervention period. Additionally, detraining effects will be measured 12 weeks after program cessation. The control group / waiting group will not participate in any specific intervention during the experimental period, but will receive the extensive supervised program after the experimental period. It is expected that particularly the supervised combination of balance and strength / power training will improve performance in variables of balance, strength / power, body composition, cognitive function, psychosocial well-being, and falls self-efficacy of older adults. In addition, information regarding fall risk assessment, dose-response-relations, detraining effects, and supervision of training will be provided. Further, training-induced health-relevant changes, such as improved performance in activities of daily living, cognitive function, and quality of life, as well as a reduced risk for falls may help to lower costs in the health care system. Finally, practitioners, therapists, and instructors will be provided with a scientifically evaluated feasible, safe, and easy-to-administer exercise program for fall prevention.

76 FR 4350 - Health Information Technology Extension Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Health Information Technology Extension Program ACTION: Public Notice. SUMMARY: This notice announces changes to the Health Information Technology Extension... technology, as authorized under section 3012(c) of the Public Health Service Act, as added by the American...

Phase 1 Space Fission Propulsion System Testing and Development Progress

NASA Technical Reports Server (NTRS)

VanDyke, Melissa; Houts, Mike; Godfroy, Tom; Dickens, Ricky; Poston, David; Kapernick, Rick; Reid, Bob; Salvail, Pat; Ring, Peter; Schafer, Charles (Technical Monitor)

2001-01-01

Successful development of space fission systems requires an extensive program of affordable and realistic testing. In addition to tests related to design/development of the fission system, realistic testing of the actual flight unit must also be performed. If the system is designed to operate within established radiation damage and fuel burn up limits while simultaneously being designed to allow close simulation of heat from fission using resistance heaters, high confidence in fission system performance and lifetime can be attained through a series of non-nuclear tests. The Safe Affordable Fission Engine (SAFE) test series, whose ultimate goal is the demonstration of a 300 kW flight configuration system, has demonstrated that realistic testing can be performed using non-nuclear methods. This test series, carried out in collaboration with other NASA centers, other government agencies, industry, and universities, successfully completed a testing program with a 30 kWt core, Stirling engine, and ion engine configuration. Additionally, a 100 kWt core is in fabrication and appropriate test facilities are being reconfigured. This paper describes the current SAFE non-nuclear tests, which includes test article descriptions, test results and conclusions, and future test plans.

Overview of Non-nuclear Testing of the Safe, Affordable 30-kW Fission Engine, Including End-to-End Demonstrator Testing

NASA Technical Reports Server (NTRS)

VanDyke, M. K.; Martin, J. J.; Houts, M. G.

2003-01-01

Successful development of space fission systems will require an extensive program of affordable and realistic testing. In addition to tests related to design/development of the fission system, realistic testing of the actual flight unit must also be performed. At the power levels under consideration (3-300 kW electric power), almost all technical issues are thermal or stress related and will not be strongly affected by the radiation environment. These issues can be resolved more thoroughly, less expensively, and in a more timely fashing with nonnuclear testing, provided it is prototypic of the system in question. This approach was used for the safe, affordable fission engine test article development program and accomplished viz cooperative efforts with Department of Energy labs, industry, universiites, and other NASA centers. This Technical Memorandum covers the analysis, testing, and data reduction of a 30-kW simulated reactor as well as an end-to-end demonstrator, including a power conversion system and an electric propulsion engine, the first of its kind in the United States.

76 FR 3175 - Proposed Extension of Existing Information Collection; Respirator Program Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-19

... extension of the information collection for Respiratory Protection Program Records under 30 CFR 56.5005 and... that such equipment offers adequate protection for workers. A written respiratory protection program... require metal and nonmetal mine operators to institute a respiratory protection program governing...

Simulation Methods for Design of Networked Power Electronics and Information Systems

DTIC Science & Technology

2014-07-01

Insertion of latency in every branch and at every node permits the system model to be efficiently distributed across many separate computing cores. An... the system . We demonstrated extensibility and generality of the Virtual Test Bed (VTB) framework to support multiple solvers and their associated...Information Systems Objectives The overarching objective of this program is to develop methods for fast

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nabeel Riza

In this program, Nuonics, Inc. has studied the fundamentals of a new Silicon Carbide (SiC) materials-based optical sensor technology suited for extreme environments of coal-fired engines in power production. The program explored how SiC could be used for sensing temperature, pressure, and potential gas species in a gas turbine environment. The program successfully demonstrated the optical designs, signal processing and experimental data for enabling both temperature and pressure sensing using SiC materials. The program via its sub-contractors also explored gas species sensing using SiC, in this case, no clear commercially deployable method was proven. Extensive temperature and pressure measurement datamore » using the proposed SiC sensors was acquired to 1000 deg-C and 40 atms, respectively. Importantly, a first time packaged all-SiC probe design was successfully operated in a Siemens industrial turbine rig facility with the probe surviving the harsh chemical, pressure, and temperature environment during 28 days of test operations. The probe also survived a 1600 deg-C thermal shock test using an industrial flame.« less

The North Carolina A and T State University Student Space Shuttle Program

NASA Technical Reports Server (NTRS)

Hooker, F. D.; Ahrens, S. T.

1987-01-01

Inspired into being in 1979 by the late astronaut, Dr. Ronald McNair, the primary goal of this student centered program is to perform two experiments, Arthopod Development Study and Crystal Growth Study. Since 1979, 78 different students representing 12 majors have participated in every phase of development of the payload -- from coming up with the original ideas to final fabrication and testing. Students have also been involved in many extra activities such as presenting their results at annual meetings and hosting tours of our lab for local schools. The program has received extensive outside support in the form of funds, technical assistance and donated parts. The payload, made primarily out of aluminum, consists of a central column structure, a battery box, a crystal growth box, an arthropod development box, four control circuit boxes, and a thermograph box. The battery box contains 24, Eveready 6V, Alkaline batteries. The thermograph box contains 3 Ryan TempMentors. Fabrication of the payload is essentially complete and a complete testing program has been initiated.

Hypersonic technology-approach to an expanded program

NASA Technical Reports Server (NTRS)

Hearth, D. P.; Preyss, A. E.

1976-01-01

An overview of research, testing, and technology in the hypersonic range. Military and civilian hypersonic flight systems envisaged, ground testing facilities under development, methods for cooling the heated airframe, and use of hydrogen as fuel and coolant are discussed extensively. Air-breathing hypersonic cruise systems are emphasized, the airframe-integrated scramjet configuration is discussed and illustrated, materials proposed for hypersonic vehicles are reviewed, and test results on hypersonic flight (X-15 research aircraft) are indicated. Major advances and major problems in hypersonic flight and hypersonic technology are outlined, and the need for a hypersonic flying-laboratory research craft is stressed.

LSRA

NASA Image and Video Library

1993-04-07

A NASA CV-990, modified as a Landing Systems Research Aircraft (LSRA), in flight over NASA's Dryden Flight Research Center, Edwards, California, for a test of the space shuttle landing gear system. The space shuttle landing gear test unit, operated by a high-pressure hydraulic system, allowed engineers to assess and document the performance of space shuttle main and nose landing gear systems, tires and wheel assemblies, plus braking and nose wheel steering performance. The series of 155 test missions for the space shuttle program provided extensive data about the life and endurance of the shuttle tire systems and helped raise the shuttle crosswind landing limits at Kennedy.

LSRA in flight

NASA Image and Video Library

1993-04-07

A NASA CV-990, modified as a Landing Systems Research Aircraft (LSRA), in flight over NASA's Dryden Flight Research Center, Edwards, California, for a test of the space shuttle landing gear system. The space shuttle landing gear test unit, operated by a high-pressure hydraulic system, allowed engineers to assess and document the performance of space shuttle main and nose landing gear systems, tires and wheel assemblies, plus braking and nose wheel steering performance. The series of 155 test missions for the space shuttle program provided extensive data about the life and endurance of the shuttle tire systems and helped raise the shuttle crosswind landing limits at Kennedy.

Engineering and programming manual: Two-dimensional kinetic reference computer program (TDK)

NASA Technical Reports Server (NTRS)

Nickerson, G. R.; Dang, L. D.; Coats, D. E.

1985-01-01

The Two Dimensional Kinetics (TDK) computer program is a primary tool in applying the JANNAF liquid rocket thrust chamber performance prediction methodology. The development of a methodology that includes all aspects of rocket engine performance from analytical calculation to test measurements, that is physically accurate and consistent, and that serves as an industry and government reference is presented. Recent interest in rocket engines that operate at high expansion ratio, such as most Orbit Transfer Vehicle (OTV) engine designs, has required an extension of the analytical methods used by the TDK computer program. Thus, the version of TDK that is described in this manual is in many respects different from the 1973 version of the program. This new material reflects the new capabilities of the TDK computer program, the most important of which are described.

Maximizing Program Delivery in Extension: Lessons from Leadership for Transformation.

ERIC Educational Resources Information Center

Laughlin, Kevin M.; Schmidt, Janet L.

1995-01-01

Reviews advantages and disadvantages of four extension delivery methods: partnerships, master volunteer programs, information centers, and regional programs. Concluded that the key is matching individual, community, and emerging needs with the right method. (SK)

Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Aeronautics Research Mission Directorate Projects at NASA Glenn Research Center for 2015

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.; Morris, Jessica R.

2015-01-01

This document is intended to enable the more effective transition of NASA Glenn Research Center (GRC) SBIR technologies funded by the Small Business Innovation Research (SBIR) program as well as its companion, the Small Business Technology Transfer (STTR) program into NASA Aeronautics Research Mission Directorate (ARMD) projects. Primarily, it is intended to help NASA program and project managers find useful technologies that have undergone extensive research and development (RRD), through Phase II of the SBIR program; however, it can also assist non-NASA agencies and commercial companies in this process. aviation safety, unmanned aircraft, ground and flight test technique, low emissions, quiet performance, rotorcraft

Autonomous landing guidance program

NASA Astrophysics Data System (ADS)

Brown, John A.

1996-05-01

The Autonomous Landing Guidance program is partly funded by the US Government under the Technology Reinvestment Project. The program consortium consists of avionics and other equipment vendors, airlines and the USAF. A Sextant Avionique HUD is used to present flight symbology in cursive form as well as millimeter wave radar imagery from Lear Astronics equipment and FLIR Systems dual-channel, forward-looking, infrared imagery. All sensor imagery is presented in raster form. A future aim is to fuse all imagery data into a single presentation. Sensor testing has been accomplished in a Cessna 402 operated by the Maryland Advanced Development Laboratory. Development testing is under way in a Northwest Airlines simulator equipped with HUD and image simulation. Testing is also being carried out using United Airlines Boeing 727 and USAF C-135C (Boeing 707) test aircraft. The paper addresses the technology utilized in sensory and display systems as well as modifications made to accommodate the elements in the aircraft. Additions to the system test aircraft include global positioning systems, inertial navigation systems and extensive data collection equipment. Operational philosophy and benefits for both civil and military users are apparent. Approach procedures have been developed allowing use of Category 1 ground installations in Category 3 conditions.

Space Shuttle Pressure Data Model in the 10- by 10-Foot Supersonic Wind Tunnel

NASA Image and Video Library

1978-04-21

Technicians examine a scale model of the space shuttle used to obtain pressure data during tests in the 10- by 10-Foot Supersonic Wind Tunnel at the National Aeronautics and Space Administration (NASA) Lewis Research Center. Lewis researchers used the 10- by 10 tunnel extensively in the 1970s to study shuttle configurations in order to forecast conditions during an actual flight. These tests included analysis of the solid rocket boosters’ aerodynamics, orbiter forebody angle -of -attack and air speed, base heating for entire shuttle, and engine-out loads. The test seen in this photograph used a 3.5- percent scale aluminum alloy model of the entire launch configuration. The program was designed to obtain aerodynamic pressure data. The tests were part of a larger program to study possible trouble areas for the shuttle’s new Advanced Flexible Reusable Surface Insulation. The researchers obtained aeroacoustic data and pressure distributions from five locations on the model. Over 100 high-temperature pressure transducers were attached to the model. Other portions of the test program were conducted at Lewis’ 8- by 6-Foot Supersonic Wind Tunnel and the 11- by 11-Foot Transonic Wind Tunnel at Ames Research Center.

Bringing UAVs to the fight: recent army autonomy research and a vision for the future

NASA Astrophysics Data System (ADS)

Moorthy, Jay; Higgins, Raymond; Arthur, Keith

2008-04-01

The Unmanned Autonomous Collaborative Operations (UACO) program was initiated in recognition of the high operational burden associated with utilizing unmanned systems by both mounted and dismounted, ground and airborne warfighters. The program was previously introduced at the 62nd Annual Forum of the American Helicopter Society in May of 20061. This paper presents the three technical approaches taken and results obtained in UACO. All three approaches were validated extensively in contractor simulations, two were validated in government simulation, one was flight tested outside the UACO program, and one was flight tested in Part 2 of UACO. Results and recommendations are discussed regarding diverse areas such as user training and human-machine interface, workload distribution, UAV flight safety, data link bandwidth, user interface constructs, adaptive algorithms, air vehicle system integration, and target recognition. Finally, a vision for UAV As A Wingman is presented.

UH-60 Airloads Program Tutorial

NASA Technical Reports Server (NTRS)

Bousman, William G.

2009-01-01

From the fall of 1993 to late winter of 1994, NASA Ames and the U.S. Army flew a flight test program using a UH-60A helicopter with extensive instrumentation on the rotor and blades, including 242 pressure transducers. Over this period, approximately 30 flights were made, and data were obtained in level flight, maneuver, ascents, and descents. Coordinated acoustic measurements were obtained with a ground-acoustic array in cooperation with NASA Langley, and in-flight acoustic measurements with a YO-3A aircraft. NASA has sponsored the creation of a "tutorial' which covers the depth and breadth of the flight test program with a mixture of text and graphics. The primary purpose of this tutorial is to introduce the student to what is known about rotor aerodynamics based on the UH-60A measurements. The tutorial will also be useful to anyone interested in helicopters who would like to have more detailed knowledge about helicopter aerodynamics.

Wisconsin Twin Research: early development, childhood psychopathology, autism, and sensory over-responsivity.

PubMed

Schmidt, Nicole L; Van Hulle, Carol A; Brooker, Rebecca J; Meyer, Lauren R; Lemery-Chalfant, Kathryn; Goldsmith, H Hill

2013-02-01

The Wisconsin Twin Research Program comprises multiple longitudinal studies that utilize a panel recruited from statewide birth records for the years 1989 through 2004. Our research foci are the etiology and developmental course of early emotions, temperament, childhood anxiety and impulsivity, autism, sensory over-responsivity, and related topics. A signature feature of this research program is the breadth and depth of assessment during key periods of development. The assessments include extensive home- and laboratory-based behavioral batteries, recorded sibling and caregiver interactions, structured psychiatric interviews with caregivers and adolescents, observer ratings of child behavior, child self-report, cognitive testing, neuroendocrine measures, medical records, dermatoglyphics, genotyping, and neuroimaging. Across the various studies, testing occasions occurred between 3 months and 18 years of age. Data collection for some aspects of the research program has concluded and, for other aspects, longitudinal follow-ups are in progress.

Wisconsin Twin Research: Early Development, Childhood Psychopathology, Autism, and Sensory Over-responsivity

PubMed Central

Schmidt, Nicole L.; Van Hulle, Carol; Brooker, Rebecca J.; Meyer, Lauren R.; Lemery-Chalfant, Kathryn; Goldsmith, H. H.

2012-01-01

The Wisconsin Twin Research Program comprises multiple longitudinal studies that utilize a panel recruited from statewide birth records for the years 1989 through 2004. Our research foci are the etiology and developmental course of early emotions, temperament, childhood anxiety and impulsivity, autism, sensory over-responsivity, and related topics. A signature feature of this research program is the breadth and depth of assessment during key periods of development. The assessments include extensive home and laboratory-based behavioral batteries, recorded sibling and caregiver interactions, structured psychiatric interviews with caregivers and adolescents, observer ratings of child behavior, child self-report, cognitive testing, neuroendocrine measures, medical records, dermatoglyphics, genotyping, and neuroimaging. Across the various studies, testing occasions occurred between 3 months and 18 years of age. Data collection for some aspects of the research program has concluded and, for other aspects, longitudinal follow-ups are in progress. PMID:23200241

Production development of organic nonflammable spacecraft potting, encapsulating and conformal coating compounds. Volume 1: Discussion, figures, and references

NASA Technical Reports Server (NTRS)

Lieberman, S. L.

1974-01-01

Based upon extensive contacts with vendors, a broad array of non-flammable polymeric specie, and additives generally noted to have flame retarding properties, were considered. The following polymeric matrices were examined: modified silicone and fluorosilicone RTV's polyesters, epoxies, urethanes, and epoxy-urethanes. Optimization of formulations to obtain a suitable balance between the various properties and flammability resistance led to the final selection of a silicone RTV/additive-loaded compound which meets almost all program requirements. The very low valued properties found are within a realistic level of design toleration. Complete formulation, processing, and test data is provided for this compound, EPOCAST 87517-A/B, and the other formulations prepared by the project. Details of those test methods are presented along with procedures utilized in the program. In addition, a description of the special flammability facility previously designed and then modified for this program is also presented.

Externships in Sustainability Program as an Outreach Tool for Extension

ERIC Educational Resources Information Center

Apel, Mark; Mostafa, Ayman; Brandau, Bill; Garfin, Gregg

2013-01-01

In 2011, Arizona Cooperative Extension implemented Externships in Sustainability, a program in which undergraduate students conduct community-based sustainability projects. In contrast to internships, in which students shadow a professional, externship students apply their skills to community outreach. Extension faculty proposed projects and…

Extension Wellness Ambassadors: Individual Effects of Participation in a Health-Focused Master Volunteer Program

ERIC Educational Resources Information Center

Washburn, Lisa T.; Traywick, LaVona; Copeland, Lauren; Vincent, Jessica

2017-01-01

We present findings from a pilot implementation of the Extension Wellness Ambassador Program, a health-focused master volunteer program, and briefly describe the program approach and purpose. Program participants received 40 hr of training and completed assessments of self-efficacy, physical activity, and functional fitness at baseline and 3-month…

MG SPROUTS: A Project-in-a-Box Approach to Educational Programming

ERIC Educational Resources Information Center

Dorn,Sheri; Slagle, Krissy

2016-01-01

MG SPROUTS was developed as a "project-in-a-box" program, a self-contained educational programming tool for Extension agents working with master gardener Extension volunteers (MGEVs). The program design incorporates programmatic materials and project management materials and follows best management practices for volunteer management. MG…

Watershed Stewardship Education Program--A Multidisciplinary Extension Education Program for Oregon's Watershed Councils.

ERIC Educational Resources Information Center

Conway, Flaxen D. L.; Godwin, Derek; Cloughesy, Mike; Nierenberg, Tara

2003-01-01

The Watershed Stewardship Education Program (WSEP) is a multidisciplinary Oregon Extension designed to help watershed councils, landowners, and others work effectively together on water management. Components include practical, easy-to-use educational materials, training in effective collaboration, a Master Watershed Stewards program, and advanced…

76 FR 16000 - Voluntary Protection Programs Information; Extension of the Office of Management and Budget's...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-22

... management programs including how the programs successfully address management leadership and employee...] Voluntary Protection Programs Information; Extension of the Office of Management and Budget's (OMB's... concerning its proposal to extend the Office of Management and Budget's (OMB's) approval of the information...

TOWN AND COUNTRY BUSINESS PROGRAM. (TITLE SUPPLIED).

ERIC Educational Resources Information Center

LEYENDECKER, P.J.

THESE 14 PAMPHLETS CONSTITUTE AN EXTENSION SERVICE PROGRAM OUTLINE FOR TEACHING A BUSINESS PROGRAM APPLICABLE TO RURAL YOUTH. THE CONTENTS INCLUDE BOTH A LEADER'S GUIDE AND AN EXTENSION WORKER'S GUIDE. THE REMAINDER OF THE PROGRAM DELVES INTO MARKETING, WHOLESALING, SALES AND SERVICES, STANDARDS AND GRADES OF PRODUCE, ASSEMBLY AND STORAGE,…

Utilizing a State Level Volunteer Recognition Program at the County Level

ERIC Educational Resources Information Center

McCall, Fran Korthaus; Culp, Ken, III

2013-01-01

Volunteer recognition is an important component of Extension programs. Most land-grant universities have implemented a state volunteer recognition program. Extension professionals, however, are too overburdened with meetings, programs, and activities to effectively recognize volunteers locally. Utilizing a state model is an efficient means of…

77 FR 49782 - Extension of the Application Deadline for Humanitarian Awards Pilot Program

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

...] Extension of the Application Deadline for Humanitarian Awards Pilot Program AGENCY: United States Patent and... Trademark Office (USPTO) announced the Humanitarian Awards Pilot Program, which recognizes patent holders... extending the deadline for applications to the Humanitarian Awards Pilot Program by two months until October...

The Role of Extension Nutrition Education in Student Achievement of Nutrition Standards in Grades K-3: A Descriptive Evaluation of a School-Based Program

ERIC Educational Resources Information Center

Arnold, Mary E.; Schreiber, Debera

2012-01-01

This article reports the results of a descriptive evaluation of the impact of an in-school Extension nutrition education program in a small, very rural county. The evaluation focused on understanding the nature of the role the Extension educator plays in delivering nutrition education, the impact of the program on student learning and achievement…

A research program to reduce interior noise in general aviation airplanes: Investigation of the characteristics of an acoustic panel test facility

NASA Technical Reports Server (NTRS)

Grosveld, F.; Vanaken, J.

1978-01-01

Sound pressure levels in the test facility were studied that are caused by varying: (1) microphone positions; (2) equalizer setting; and (3) panel clamping forces. Measurements were done by using a Beranek tube or this Beranek tube in combinations with an extension tube and a special test section. In all configurations tests were executed with and without a test panel installed. The influence of the speaker back panel and the back panel of the Beranek tube on the sound pressure levels inside the test tube were also investigated. It is shown that the definition of noise reduction is more useful in relation to this test facility than transmission loss.

Proven, long-life hydrogen/oxygen thrust chambers for space station propulsion

NASA Technical Reports Server (NTRS)

Richter, G. P.; Price, H. G.

1986-01-01

The development of the manned space station has necessitated the development of technology related to an onboard auxiliary propulsion system (APS) required to provide for various space station attitude control, orbit positioning, and docking maneuvers. A key component of this onboard APS is the thrust chamber design. To develop the required thrust chamber technology to support the Space Station Program, the NASA Lewis Research Center has sponsored development programs under contracts with Aerojet TechSystems Company and with Bell Aerospace Textron Division of Textron, Inc. During the NASA Lewis sponsored program with Aerojet TechSystems, a 25 lb sub f hydrogen/oxygen thruster has been developed and proven as a viable candidate to meet the needs of the Space Station Program. Likewise, during the development program with Bell Aerospace, a 50 lb sub f hydrogen/oxygen Thrust Chamber has been developed and has demonstrated reliable, long-life expectancy at anticipated space station operating conditions. Both these thrust chambers were based on design criteria developed in previous thruster programs and successfully verified in experimental test programs. Extensive thermal analyses and models were used to design the thrusters to achieve total impulse goals of 2 x 10 to the 6th power lb sub f-sec. Test data for each thruster will be compared to the analytical predictions for the performance and heat transfer characteristics. Also, the results of thrust chamber life verification tests will be presented.

Graph Structured Program Evolution: Evolution of Loop Structures

NASA Astrophysics Data System (ADS)

Shirakawa, Shinichi; Nagao, Tomoharu

Recently, numerous automatic programming techniques have been developed and applied in various fields. A typical example is genetic programming (GP), and various extensions and representations of GP have been proposed thus far. Complex programs and hand-written programs, however, may contain several loops and handle multiple data types. In this chapter, we propose a new method called Graph Structured Program Evolution (GRAPE). The representation of GRAPE is a graph structure; therefore, it can represent branches and loops using this structure. Each programis constructed as an arbitrary directed graph of nodes and a data set. The GRAPE program handles multiple data types using the data set for each type, and the genotype of GRAPE takes the form of a linear string of integers. We apply GRAPE to three test problems, factorial, exponentiation, and list sorting, and demonstrate that the optimum solution in each problem is obtained by the GRAPE system.

Use of Demonstration Gardens in Extension: Challenges and Benefits

ERIC Educational Resources Information Center

Glen, Charlotte D.; Moore, Gary E.; Jayaratne, K. S. U.; Bradley, Lucy K.

2014-01-01

Extension agents' use of demonstration gardens was studied to determine how gardens are employed in horticultural programming, perceived benefits and challenges of using gardens for Extension programming, and desired competencies. Gardens are primarily used to enhance educational efforts by providing hands-on learning experiences. Greatest…

Interdisciplinary Professional Development Needs of Cooperative Extension Field Educators

ERIC Educational Resources Information Center

Sondgerath, Travis

2016-01-01

The study discussed in this article sought to identify cross-program professional development needs of county-based Extension professionals (field educators). The study instrument was completed by 105 county-based Extension professionals. Interdisciplinary topics, such as program evaluation and volunteer management, were identified as subjects of…

[The role of national rural organization and agricultural extension services in relation to women].

PubMed

Martius Von Harder, G

1985-01-01

Rural extension services are designed to provide rural dwellers with information needed to further technical or social development and to solve problems. Extension agents should be fully aware of their responsibility for the advice they provide. The number of rural and agricultural development and extension agencies has multiplied greatly in the past 2 decades. Agricultural extension is the principal component of most rural development strategies. Training given to men is usually economic, while that for women is devoted to household and social functioning. Programs for women usually lag general development programs. Training of women is usually not included in agricultural extension programs, especially in countries practicing segregation of the sexes. Agricultural extension programs are generally limited to cultivation techniques and neglect transformation and storage of crops and seed preparation for increased production. Measures that could improve productivity of women's agriculture-related work are expected to be delivered through the intermediacy of their husbands, but the husbands may not appreciate the import of such messages if they are not familiar with their wives' work. Agricultural training should consider all stages of production, should be delivered to the individuals actually performing the tasks, and should be ecologically appropriate. The overall objective of agricultural extension is to increase production, but most programs do not specify who is to use the surplus or to benefit from it. The rural population or the urban population may be the prime beneficiary, or cash crops may be produced for export. Although increased production should benefit the rural population through a better food supply, in reality most extension programs are devoted to cash crops for export and are less than fully successful because of problems of crop distribution and marketing and other shortcomings. Where men and women perform the same agricultural work, it should be possible for training sessions to be held jointly for both sexes, but cultural tabus and sexual division of labor may be such that different programs and personnel are required for men and women. There are currently numerous limitations on the inclusion of women in extension programs, including official policies against female employment and ignorance of the contribution of female agricultural work and social customs which discourage female social participation. There may be few or no women extension workers, female extension agents may try to avoid fieldwork, they may spend most of their time training women in household management, or their mobility may be strictly limited by family responsibilities.

Fall 2012 Graduate Engineering Internship Summary

NASA Technical Reports Server (NTRS)

Ehrlich, Joshua

2013-01-01

In the fall of 2012, I participated in the National Aeronautics and Space Administration (NASA) Pathways Intern Employment Program at the Kennedy Space Center (KSC) in Florida. This was my second internship opportunity with NASA, a consecutive extension from a summer 2012 internship. During my four-month tenure, I gained valuable knowledge and extensive hands-on experience with payload design and testing as well as composite fabrication for repair design on future space vehicle structures. As a systems engineer, I supported the systems engineering and integration team with the testing of scientific payloads such as the Vegetable Production System (Veggie). Verification and validation (V&V) of the Veggie was carried out prior to qualification testing of the payload, which incorporated a lengthy process of confirming design requirements that were integrated through one or more validatjon methods: inspection, analysis, demonstration, and testing. Additionally, I provided assistance in verifying design requirements outlined in the V&V plan with the requirements outlined by the scientists in the Science Requirements Envelope Document (SRED). The purpose of the SRED was to define experiment requirements intended for the payload to meet and carry out.

75 FR 70578 - Competitive and Noncompetitive Nonformula Federal Assistance Programs-Administrative Provisions...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-18

..., extension, and education programs on technology development and integrated research, extension, and education programs on technology implementation, in accordance with the purpose and priorities as described... the development, distribution, and implementation of biobased energy technologies; to promote...

Relationship between antigravity control and postural control in young children.

PubMed

Sellers, J S

1988-04-01

The purposes of this study were 1) to determine the relationship between antigravity control (supine flexion and prone extension) and postural control (static and dynamic balance), 2) to determine the quality of antigravity and postural control, and 3) to determine whether sex and ethnic group differences correlate with differences in antigravity control and postural control in young children. I tested 107 black, Hispanic, and Caucasian children in a Head Start program, with a mean age of 61 months. The study results showed significant relationships between antigravity control and postural control. Subjects' supine flexion performance was significantly related to the quantity and quality of their static and dynamic balance performance, whereas prone extension performance was related only to the quality of dynamic balance performance. Quality scale measurements (r = .90) indicated that the children in this study had not yet developed full antigravity or postural control. The study results revealed differences between sexes in the quality of static balance and prone extension performance and ethnic differences in static balance, dynamic balance, and prone extension performance.

NASULGC Council on Extension, Committee on Program Innovation and Action Oriented Research; 1968 Report. Part 1. Program Innovations. Part 2. Action Oriented Research.

ERIC Educational Resources Information Center

National Association of State Universities and Land Grant Colleges, Washington, DC.

This report on extension activities of member institutions of the National Association of State Universities and Land Grant Colleges describes 91 program innovations and action oriented research activities. Objectives, sponsorship, program evaluations, and other data are cited for program innovations in such areas as continuing medical education,…

Commercialization of the British Extension Service: An American View.

ERIC Educational Resources Information Center

Harter, Don

1993-01-01

Britain's decision to commercialize the Agricultural Development and Advisory Service has implications for extension programs in other countries. If programs now offered were commercialized, extension would no longer be an agency responsive to the public interest as a whole but would be driven by interests of paying clients. (JOW)

University to Community and Back: Creating a Customer Focused Process.

ERIC Educational Resources Information Center

Martin-Milius, Tara

This paper examines ways in which university extension programs can become more customer-focused in the courses and services that they deliver, focusing on the experiences of the University of California Extension, Santa Cruz. Extension programs can increase their effectiveness by: (1) establishing partnerships with other service organizations,…

Influencing woodland management using web-based technology

Treesearch

William R. Thomas; Jeffrey W. Stringer

2011-01-01

The University of Kentucky, Department of Forestry Extension delivered hosted Web-based forestry educational programs ("webinars") in 2009 to promote woodland management in Kentucky and engage county extension agents in forestry programming. These webinars were hosted by county extension agents and attended by woodland owners. This hosted webinar approach was...

Writing Panels Articulate Extension Public Value in the West

ERIC Educational Resources Information Center

Carroll, Jan. B.; Dinstel, Roxie Rogers; Manton, Linda Marie

2015-01-01

In every era, publicly funded programs seek to document their value. During the centennial celebrations of Cooperative Extension's legislation and establishment, this cry for data became even louder and the demand more intense. The Western Extension Directors Association (WEDA) tasked their Western Region Program Leadership Committee (WRPLC) to…

Community Leadership Development: Implications for Extension.

ERIC Educational Resources Information Center

Northeast Regional Center for Rural Development, University Park, PA.

Designed for extension personnel who are involved in community leadership (CL) programs, this publication summarizes recent national efforts that could be useful in developing and conducting CL programs, and current leadership theory and literature. Part 1 reports the results of the national survey, initiated in April 1985, of extension staff…

A Change Impact Analysis to Characterize Evolving Program Behaviors

NASA Technical Reports Server (NTRS)

Rungta, Neha Shyam; Person, Suzette; Branchaud, Joshua

2012-01-01

Change impact analysis techniques estimate the potential effects of changes made to software. Directed Incremental Symbolic Execution (DiSE) is an intraprocedural technique for characterizing the impact of software changes on program behaviors. DiSE first estimates the impact of the changes on the source code using program slicing techniques, and then uses the impact sets to guide symbolic execution to generate path conditions that characterize impacted program behaviors. DiSE, however, cannot reason about the flow of impact between methods and will fail to generate path conditions for certain impacted program behaviors. In this work, we present iDiSE, an extension to DiSE that performs an interprocedural analysis. iDiSE combines static and dynamic calling context information to efficiently generate impacted program behaviors across calling contexts. Information about impacted program behaviors is useful for testing, verification, and debugging of evolving programs. We present a case-study of our implementation of the iDiSE algorithm to demonstrate its efficiency at computing impacted program behaviors. Traditional notions of coverage are insufficient for characterizing the testing efforts used to validate evolving program behaviors because they do not take into account the impact of changes to the code. In this work we present novel definitions of impacted coverage metrics that are useful for evaluating the testing effort required to test evolving programs. We then describe how the notions of impacted coverage can be used to configure techniques such as DiSE and iDiSE in order to support regression testing related tasks. We also discuss how DiSE and iDiSE can be configured for debugging finding the root cause of errors introduced by changes made to the code. In our empirical evaluation we demonstrate that the configurations of DiSE and iDiSE can be used to support various software maintenance tasks

Dare To Be You: A Diversion Program for First Time Juvenile Offenders.

ERIC Educational Resources Information Center

Vail, Ann; Nest, Judy

This document notes that community-based organizations such as the Cooperative Extension Service have joined the efforts to reduce juvenile delinquency through juvenile diversion programs. It then describes the "Dare to be You" program that was developed by the Colorado Cooperative Extension System. The six objectives of the program delineated in…

Criterion-Related Validity of Sit-and-Reach Tests for Estimating Hamstring and Lumbar Extensibility: a Meta-Analysis

PubMed Central

Mayorga-Vega, Daniel; Merino-Marban, Rafael; Viciana, Jesús

2014-01-01

The main purpose of the present meta-analysis was to examine the scientific literature on the criterion-related validity of sit-and-reach tests for estimating hamstring and lumbar extensibility. For this purpose relevant studies were searched from seven electronic databases dated up through December 2012. Primary outcomes of criterion-related validity were Pearson´s zero-order correlation coefficients (r) between sit-and-reach tests and hamstrings and/or lumbar extensibility criterion measures. Then, from the included studies, the Hunter- Schmidt´s psychometric meta-analysis approach was conducted to estimate population criterion- related validity of sit-and-reach tests. Firstly, the corrected correlation mean (rp), unaffected by statistical artefacts (i.e., sampling error and measurement error), was calculated separately for each sit-and-reach test. Subsequently, the three potential moderator variables (sex of participants, age of participants, and level of hamstring extensibility) were examined by a partially hierarchical analysis. Of the 34 studies included in the present meta-analysis, 99 correlations values across eight sit-and-reach tests and 51 across seven sit-and-reach tests were retrieved for hamstring and lumbar extensibility, respectively. The overall results showed that all sit-and-reach tests had a moderate mean criterion-related validity for estimating hamstring extensibility (rp = 0.46-0.67), but they had a low mean for estimating lumbar extensibility (rp = 0. 16-0.35). Generally, females, adults and participants with high levels of hamstring extensibility tended to have greater mean values of criterion-related validity for estimating hamstring extensibility. When the use of angular tests is limited such as in a school setting or in large scale studies, scientists and practitioners could use the sit-and-reach tests as a useful alternative for hamstring extensibility estimation, but not for estimating lumbar extensibility. Key Points Overall sit-and-reach tests have a moderate mean criterion-related validity for estimating hamstring extensibility, but they have a low mean validity for estimating lumbar extensibility. Among all the sit-and-reach test protocols, the Classic sit-and-reach test seems to be the best option to estimate hamstring extensibility. End scores (e.g., the Classic sit-and-reach test) are a better indicator of hamstring extensibility than the modifications that incorporate fingers-to-box distance (e.g., the Modified sit-and-reach test). When angular tests such as straight leg raise or knee extension tests cannot be used, sit-and-reach tests seem to be a useful field test alternative to estimate hamstring extensibility, but not to estimate lumbar extensibility. PMID:24570599

FY 2017 Stockpile Stewardship and Management Plan - Biennial Plan Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2016-03-01

This year’s summary report updates the Fiscal Year 2016 Stockpile Stewardship and Management Plan (FY 2016 SSMP), the 25-year strategic program of record that captures the plans developed across numerous NNSA programs and organizations to maintain and modernize the scientific tools, capabilities, and infrastructure necessary to ensure the success of NNSA’s nuclear weapons mission. The SSMP is a companion to the Prevent, Counter, and Respond: A Strategic Plan to Reduce Global Nuclear Threats (FY 2017-2021) report, the planning document for NNSA’s nuclear threat reduction mission. New versions of both reports are published each year in response to new requirements andmore » challenges. Much was accomplished in FY 2015 as part of the program of record described in this year’s SSMP. The science-based Stockpile Stewardship Program allowed the Secretaries of Energy and Defense to certify for the twentieth time that the stockpile remains safe, secure, and effective without the need for underground nuclear explosive testing. The talented scientists, engineers, and technicians at the three national security laboratories, the four nuclear weapons production plants, and the national security site are primarily responsible for this continued success. Research, development, test, and evaluation programs have advanced NNSA’s understanding of weapons physics, component aging, and material properties through first-of-a-kind shock physics experiments, along with numerous other critical experiments conducted throughout the nuclear security enterprise. The multiple life extension programs (LEPs) that are under way made progress toward their first production unit dates. The W76-1 LEP is past the halfway point in total production, and the B61-12 completed three development flight tests. Critical to this success is the budget. The Administration’s budget request for NNSA’s Weapons Activities has increased for all but one of the past seven years, resulting in a total increase of approximately 45 percent since 2010. If adopted by Congress, the FY 2017 budget request will increase funding by $396 million (about 4.5 percent) from the enacted FY 2016 level. A significant portion of the increase would fund the research for multiple life extension programs, support the programs in Directed Stockpile Work, and modernize the physical infrastructure of the nuclear security enterprise.« less

Survey of supersonic combustion ramjet research at Langley

NASA Technical Reports Server (NTRS)

Northam, G. B.; Anderson, G. Y.

1986-01-01

The Hypersonic Propulsion Branch at NASA Langley Research Center has maintained an active research program in supersonic combustion ramjet (scramjet) and high speed ramjet propulsion since the 1960s. The focus for this research has centered on propulsion for manned reuseable vehicles with cryogenic hydrogen fuel. This paper presents some highlights of this research. The design philosophy of the Langley fixed-geometry airframe-integrated modular scramjet is discussed. The component development and research programs that have supported the successful demonstration of the engine concept using subscale engine module hardware is reviewed and a brief summary of the engine tests presented. An extensive bibliography of research supported by the Langley program is also included.

Design and testing of an energy-absorbing crewseat for the F/FB-111 aircraft, volume 1

NASA Technical Reports Server (NTRS)

Shane, S. J.

1985-01-01

A program to determine if the injury potential could be reduced by replacing the existing crewseats with energy absorbing crewseats is explored. An energy-absorbing test seat was designed using much of the existing seat hardware. An extensive dynamic seat test series, designed to duplicate various crew module ground impact conditions, was conducted at a sled test facility. Comparative tests with operational F-111 crewseats were also conducted. After successful dynamic testing of the seat, more testing was conducted with the seats mounted in an F-111 crew module. Both swing tests and vertical drop tests were conducted. The vertical drop tests were used to obtain comparative data between the energy-absorbing and operational seats. Volume 1 describes the energy absorbing test seat and testing conducted, and evaluates the data from both test series.

Analysis of lead-acid battery accelerated testing data

NASA Astrophysics Data System (ADS)

Clifford, J. E.; Thomas, R. E.

1983-06-01

Battelle conducted an independent review and analysis of the accelerated test procedures and test data obtained by Exide in the 3 year Phase 1 program to develop advanced lead acid batteries for utility load leveling. Of special importance is the extensive data obtained in deep discharge cycling tests on 60 cells at elevated temperatures over a 2-1/2 year period. The principal uncertainty in estimating cell life relates to projecting cycle life data at elevated temperature to the lower operating temperatures. The accelerated positive grid corrosion test involving continuous overcharge at 500C provided some indication of the degree of grid corrosion that might be tolerable before failure. The accelerated positive material shedding test was not examined in any detail. Recommendations are made for additional studies.

Status of Wrought FeCrAl-UO 2 Capsules Irradiated in the Advanced Test Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Field, Kevin G.; Harp, J.; Core, G.

2017-07-01

Candidate cladding materials for accident tolerant fuel applications require extensive testing and validation prior to commercial deployment within the nuclear power industry. One class of cladding materials, FeCrAl alloys, is currently undergoing such effort. Within these activities is a series of irradiation programs within the Advanced Test Reactor. These programs are developed to aid in commercial maturation and understand the fundamental mechanisms controlling the cladding performance during normal operation of a typical light water reactor. Three different irradiation programs are on-going; one designed as a simple proof-of-principle concept, the other to evaluate the susceptibility of FeCrAl to fuel-cladding chemical interaction,more » and the last to fully simulate the conditions of a pressurized water reactor experimentally. To date, nondestructive post-irradiation examination has been completed on the rodlet deemed FCA-L3 from the simple proof-of-concept irradiation program. Initial results show possible breach of the rodlet under irradiation but further studies are needed to conclusively determine whether breach has occurred and the underlying reasons for such a possible failure. Further work includes characterizing additional rodlets following irradiation.« less

Grandparents University: Wisconsin Program Unites Generations

ERIC Educational Resources Information Center

Geyer, Bonnie Hutchins; Brintnall-Peterson, Mary; Schutt, Sarah

2004-01-01

"Grandparents University", a program planned and sponsored collaboratively by the University of Wisconsin--Extension Cooperative Extension Family Living Programs and the Wisconsin Alumni Association, was designed to enhance the relationship that exists between the grandparent and grandchild. In July of each year, grandchildren between…

Farmers Extension Program Effects on Yield Gap in North China Plain

NASA Astrophysics Data System (ADS)

Sum, N.; Zhao, Y.

2015-12-01

Improving crop yield of the lowest yielding smallholder farmers in developing countries is essential to both food security of the country and the farmers' livelihood. Although wheat and maize production in most developed countries have reached 80% or greater of yield potential determined by simulated models, yield gap remains high in the developing world. One of these cases is the yield gap of maize in the North China Plain (NCP), where the average farmer's yield is 41% of his or her potential yield. This large yield gap indicates opportunity to raise yields substantially by improving agronomy, especially in nutrition management, irrigation facility, and mechanization issues such as technical services. Farmers' agronomic knowledge is essential to yield performance. In order to propagate such knowledge to farmers, agricultural extension programs, especially in-the-field guidance with training programs at targeted demonstration fields, have become prevalent in China. Although traditional analyses of the effects of the extension program are done through surveys, they are limited to only one to two years and to a small area. However, the spatial analysis tool Google Earth Engine (GEE) and its extensive satellite imagery data allow for unprecedented spatial temporal analysis of yield variation. We used GEE to analyze maize yield in Quzhou county in the North China Plain from 2007 to 2013. We based our analysis on the distance from a demonstration farm plot, the source of the farmers' agronomic knowledge. Our hypothesis was that the farther the farmers' fields were from the demonstration plot, the less access they would have to the knowledge, and the less increase in yield over time. Testing this hypothesis using GEE helps us determine the effectiveness of the demonstration plot in disseminating optimal agronomic practices in addition to evaluating yield performance of the demonstration field itself. Furthermore, we can easily extend this methodology to analyze the whole NCP and any other parts of the world for any type of crop.

Analytical modeling of flash-back phenomena. [premixed/prevaporized combustion system

NASA Technical Reports Server (NTRS)

Feng, C. C.

1979-01-01

To understand the flame flash-back phenomena more extensively, an analytical model was formed and a numerical program was written and tested to solve the set of differential equations describing the model. Results show that under a given set of conditions flame propagates in the boundary layer on a flat plate when the free stream is at or below 1.8 m/s.

The Big-Fish-Little-Pond Effect: Generalizability of Social Comparison Processes over Two Age Cohorts from Western, Asian, and Middle Eastern Islamic Countries

ERIC Educational Resources Information Center

Marsh, Herbert W.; Abduljabbar, Adel Salah; Morin, Alexandre J. S.; Parker, Philip; Abdelfattah, Faisal; Nagengast, Benjamin; Abu-Hilal, Maher M.

2015-01-01

Extensive support for the seemingly paradoxical negative effects of school- and class-average achievement on academic self-concept (ASC)-the big-fish-little-pond effect (BFLPE)--is based largely on secondary students in Western countries or on cross-cultural Program for International Student Assessment studies. There is little research testing the…

Homemaker Reaction to EFNEP/Food Stamp Pilot Nutrition Education Project. A 1983 Pennsylvania and Massachusetts Survey. Extension Studies 92.

ERIC Educational Resources Information Center

Dunn, Polly P.; And Others

Between 1982 and 1983, more than 750 homemakers from Pennsylvania and Massachusetts participated in a national study to test selected methods of delivering nutrition education to low-income families. The study, the Expanded Food and Nutrition Education Program (EFNEP)/Food Stamp Pilot Project, was conducted through the EFNEP in 10 states. At the…

Nonstrategic Nuclear Weapons at an Inflection Point

DTIC Science & Technology

2017-07-01

11 figure 5. the B61 Mod 12 Nuclear Bomb and the f...B61 Mod 12 Nuclear Bomb , US Department of Energy, “NNSA Reaches B61-12 Life Extension Program Milestone: First Full-System Mechanical Environment Test... bomb ).22 20 Some warheads were to be to be eliminated; others were to be maintained in central storage. See Susan J. Koch, The Presidential Nuclear

Metabolic Studies in Military Nutrition.

DTIC Science & Technology

1977-05-01

The Surgeon General’s Office over a period of years has undertaken an extensive research program into the chemistry, nutrition , and wholesomeness of...Research and Nutrition Laboratory has undertaken the studies of the wholesomeness of food preserved by ionizing radiation. Work on radiated food has been...physiological, metabolic, and nutritional research in normal young adult men has been going on making use of volunteer human test subjects.

Partial ASL extensions for stochastic programming.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gay, David

2010-03-31

partially completed extensions for stochastic programming to the AMPL/solver interface library (ASL).modeling and experimenting with stochastic recourse problems. This software is not primarily for military applications

Spray nozzle investigation for the Improved Helicopter Icing Spray System (IHISS)

NASA Technical Reports Server (NTRS)

Peterson, Andrew A.; Oldenburg, John R.

1990-01-01

A contract has been awarded by the U.S. Army to design, fabricate and test a replacement for the existing Helicopter Icing Spray System. Data are shown for extensive bench and icing tunnel test programs used to select and modify an improved spray nozzle. The IHISS, capable of deployment from any CH-47 helicopter, will include new icing spray nozzles and pneumatic pressure source, and a significantly larger water tank and spray boom. The resulting system will provide a significantly larger icing cloud with droplet characteristics closely matching natural icing conditions.

Experimental program to determine long term characteristics of the MDE pressure transducers

NASA Technical Reports Server (NTRS)

Parker, C. D.

1973-01-01

The pressure cell sensors developed for the Pioneer 10/G meteoroid detection experiments (MDE) were investigated to enhance their application and their potential as a sensor in other MDE applications. Their Paschen characteristics were also investigated, and the effects of variations in geometry, Ni-63 platings (for initial ionizations) and sealing pressures were determined. The effects of extensive pre-flight testing and proton and heavy ion space radiation were investigated. Flight-quality pressure panels/cells were committed to long term testing to demonstrate their suitability for the Pioneer 10/G Missions.

Data reduction analysis and application technique development for atmospheric trace gas constituents derived from remote sensors on satellite or airborne platforms

NASA Technical Reports Server (NTRS)

Casas, J. C.; Campbell, S. A.

1981-01-01

The applicability of the gas filter correlation radiometer (GFCR) to the measurement of tropospheric carbon monoxide gas was investigated. An assessment of the GFRC measurement system to a regional measurement program was conducted through extensive aircraft flight-testing of several versions of the GFRC. Investigative work in the following areas is described: flight test planning and coordination, acquisition of verifying CO measurements, determination and acquisition of supporting meteorological data requirements, and development of supporting computational software.

Mismatch or cumulative stress: toward an integrated hypothesis of programming effects.

PubMed

Nederhof, Esther; Schmidt, Mathias V

2012-07-16

This paper integrates the cumulative stress hypothesis with the mismatch hypothesis, taking into account individual differences in sensitivity to programming. According to the cumulative stress hypothesis, individuals are more likely to suffer from disease as adversity accumulates. According to the mismatch hypothesis, individuals are more likely to suffer from disease if a mismatch occurs between the early programming environment and the later adult environment. These seemingly contradicting hypotheses are integrated into a new model proposing that the cumulative stress hypothesis applies to individuals who were not or only to a small extent programmed by their early environment, while the mismatch hypothesis applies to individuals who experienced strong programming effects. Evidence for the main effects of adversity as well as evidence for the interaction between adversity in early and later life is presented from human observational studies and animal models. Next, convincing evidence for individual differences in sensitivity to programming is presented. We extensively discuss how our integrated model can be tested empirically in animal models and human studies, inviting researchers to test this model. Furthermore, this integrated model should tempt clinicians and other intervenors to interpret symptoms as possible adaptations from an evolutionary biology perspective. Copyright © 2011 Elsevier Inc. All rights reserved.

What Is Your Library Worth? Extension Uses Public Value Workshops in Communities

ERIC Educational Resources Information Center

Haskell, Jane E.; Morse, George W.

2015-01-01

Public libraries are seeing flat or reduced funding even as demands for new services are increasing. Facing an identical problem, Extension developed a program to identify the indirect benefits to non-participants of Extension programs in order to encourage their public funding support. This educational approach was customized to public libraries…

Extension Professionals' Perspectives on Supporting Feedstock Production for Biofuels: Concerns, Challenges, and Opportunities

ERIC Educational Resources Information Center

Townsend, Patricia A.; Haider, Nora M.; Asah, Stanley T.; Zobrist, Kevin W.

2016-01-01

The development of successful bioenergy programs will depend on informed and prepared Extension professionals who are willing and equipped to provide technical support. A survey of Extension professionals in the Pacific Northwest revealed barriers to program development, including limits on time and knowledge and concerns about economic returns…

The Healthy Homes Partnership: A Cooperative Extension Model

ERIC Educational Resources Information Center

Booth, Laura B.; Peek, Gina G.

2013-01-01

This article highlights the accomplishments of the Healthy Homes Partnership, which recently celebrated its 10th anniversary. Since the program began in 1999, funds totaling $2.7 million have been distributed to 34 states and Virgin Islands Extension programs through a competitive process. Extension professionals have used the funds as seed grants…

A Case Study in Organizational Change: Evaluation in Cooperative Extension

ERIC Educational Resources Information Center

Rennekamp, Roger A.; Engle, Molly

2008-01-01

This chapter examines how factors both internal and external to Cooperative Extension have influenced its commitment and capability to assess the quality and impact of its programs. The authors begin by documenting how the nature of Extension programming has changed dramatically in response to societal needs over the course of the organization's…

E-Newsletters: A Simple Way to Integrate Technology with Extension Programming

ERIC Educational Resources Information Center

Erickson, Luke; Hansen, Lyle

2012-01-01

Extension educators can easily include technology in regular programming. Several Extension faculty conducted a survey to determine the overall effectiveness of a electronic newsletter (e-newsletter). Results indicated that this e-newsletter had a wide viral reach, provided strong local impact in terms of confidence and behavior changes, increased…

Institutional Commitment to Sustainability: An Evaluation of Natural Resource Extension Programs in Universities in Alabama and Oregon

ERIC Educational Resources Information Center

Broussard, Shorna R.; Bliss, John C.

2007-01-01

Purpose: The purpose of this research is to determine institutional commitment to sustainability by examining Natural Resource Extension program inputs, activities, and participation. Design/methodology/approach: A document analysis of Natural Resource Extension planning and reporting documents was conducted to provide contextual and historical…

A Global Worldview among Extension Professionals: A Case Study of Best Practices for Study Abroad Programs

ERIC Educational Resources Information Center

Lockett, Landry; Moore, Lori; Wingenbach, Gary

2014-01-01

Globalization and diversifying communities in the United States mandate internationally minded Extension professionals and programming. The knowledge necessary for successfully working in international agricultural and Extension education is vast and takes time to acquire. A catalyst for this learning process is participation in university- or…

Online Extensive Reading for Advanced Foreign Language Learners: An Evaluation Study

ERIC Educational Resources Information Center

Arnold, Nike

2009-01-01

The following article reports the findings of a qualitative evaluation of an online extensive reading program in German as a foreign language. Designed for advanced learners, it differs from traditional extensive reading programs in two important aspects: students read online instead of printed materials, and there was no teacher preselection to…

The Extension Service as a Resource in Planning at the Local Level.

ERIC Educational Resources Information Center

Wynn, Eddie D.; Jacob, Nelson L.

Examining the role of Clemson University's Cooperative Extension Service in the planning stages of a Title V Community and Resource Development (CRD) program in South Carolina's rural Williamsburg County, this paper describes the Extension's 14-month involvement. The following specifics are addressed: (1) South Carolina's Title V program (staffed…

Connecticut Sea Grant: Making a Difference. Program Highlights, Accomplishments, and Impacts, 2001-2006

ERIC Educational Resources Information Center

Van Patten, M., Ed.

2007-01-01

The University of Connecticut (UConn) is the formally designated Sea Grant College for the State of Connecticut, serving as the "flagship" university for the Connecticut Sea Grant College Program (CTSG). While a small marine extension program began in 1974 in conjunction with the Cooperative Extension System, the program did not receive…

Heavy-section steel technology program. Semiannual progress report for period ending February 28, 1973

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1974-02-01

The materials investigations under the HSST program are divided into studies of unirradiated materials and studies of irradiation effects. The studies of unirradiated materials, which include inspection, characterization, metallurgy, variability determinations, transition temperature investigations, fracture mechanics studies, and fatigue-crack propagation tests, are discussed. The investigations of irradiated materials include studies of radiation effects on A-533-B steel. Results of studies on thick pressure vessels and pipes of ASTM A508 steel are also reported along with results of studies on Mode III crack extension in reactor piping. (JRD)

Testing to Transition the J-2X from Paper to Hardware

NASA Technical Reports Server (NTRS)

Byrd, Tom

2010-01-01

The J-2X Upper Stage Engine (USE) will be the first new human-rated upper stage engine since the Apollo program of the 1960s. It is designed to carry the Ares I and Ares V into orbit and send the Ares V to the Moon as part of NASA's Constellation Program. This paper will provide an overview of progress on the design, testing, and manufacturing of this new engine in 2009 and 2010. The J-2X embodies the program goals of basing the design on proven technology and experience and seeking commonality between the Ares vehicles as a way to minimize risk, shorten development times, and live within current budget constraints. It is based on the proven J-2 engine used on the Saturn IB and Saturn V launch vehicles. The prime contractor for the J-2X is Pratt & Whitney Rocketdyne (PWR), which is under a design, development, test, and engineering (DDT&E) contract covering the period from June 2006 through September 2014. For Ares I, the J-2X will provide engine start at approximately 190,000 feet, operate roughly 500 seconds, and shut down. For Ares V, the J-2X will start at roughly 190,000 feet to place the Earth departure stage (EDS) in orbit, shut down and loiter for up to five days, re-start on command and operate for roughly 300 seconds at its secondary power level to perform trans lunar injection (TLI), followed by final engine shutdown. The J-2X development effort focuses on four key areas: early risk mitigation, design risk mitigation, component and subassembly testing, and engine system testing. Following that plan, the J-2X successfully completed its critical design review (CDR) in 2008, and it has made significant progress in 2009 and 2010 in moving from the drawing board to the machine shop and test stand. Post-CDR manufacturing is well under way, including PWR in-house and vendor hardware. In addition, a wide range of component and sub-component tests have been completed, and more component tests are planned. Testing includes heritage powerpack, turbopump inducer water flow, turbine air flow, turbopump seal testing, main injector and gas generator, injector testing, augmented spark igniter testing, nozzle side loads cold flow testing, nozzle extension film cooling flow testing, control system testing with hardware in the loop, and nozzle extension emissivity coating tests. In parallel with hardware manufacturing, work is progressing on the new A-3 test stand to support full duration altitude testing. The Stennis A-2 test stand is scheduled to be turned over to the Constellation Program in September 2010 to be modified for J-2X testing also. As the structural steel was rising on the A-3 stand, work was under way in the nearby E complex on the chemical steam generator and subscale diffuser concepts to be used to evacuate the A-3 test cell and simulate altitude conditions.

Using insects for STEM outreach: Development and evaluation of the UA Insect Discovery Program

NASA Astrophysics Data System (ADS)

Beal, Benjamin D.

Science and technology impact most aspects of modern daily life. It is therefore important to create a scientifically literate society. Since the majority of Americans do not take college-level science courses, strong K-12 science education is essential. At the K-5 level, however, many teachers lack the time, resources and background for effective science teaching. Elementary teachers and students may benefit from scientist-led outreach programs created by Cooperative Extension or other institutions. One example is the University of Arizona Insect Discovery Program, which provides short-duration programing that uses insects to support science content learning, teach critical thinking and spark interest in science. We conducted evaluations of the Insect Discovery programming to determine whether the activities offered were accomplishing program goals. Pre-post tests, post program questionnaires for teachers, and novel assessments of children's drawings were used as assessment tools. Assessments were complicated by the short duration of the program interactions with the children as well as their limited literacy. In spite of these difficulties, results of the pre-post tests indicated a significant impact on content knowledge and critical thinking skills. Based on post-program teacher questionnaires, positive impacts on interest in science learning were noted as much as a month after the children participated in the program. New programming and resources developed to widen the potential for impact are also described.

Space Station Freedom environmental database system (FEDS) for MSFC testing

NASA Technical Reports Server (NTRS)

Story, Gail S.; Williams, Wendy; Chiu, Charles

1991-01-01

The Water Recovery Test (WRT) at Marshall Space Flight Center (MSFC) is the first demonstration of integrated water recovery systems for potable and hygiene water reuse as envisioned for Space Station Freedom (SSF). In order to satisfy the safety and health requirements placed on the SSF program and facilitate test data assessment, an extensive laboratory analysis database was established to provide a central archive and data retrieval function. The database is required to store analysis results for physical, chemical, and microbial parameters measured from water, air and surface samples collected at various locations throughout the test facility. The Oracle Relational Database Management System (RDBMS) was utilized to implement a secured on-line information system with the ECLSS WRT program as the foundation for this system. The database is supported on a VAX/VMS 8810 series mainframe and is accessible from the Marshall Information Network System (MINS). This paper summarizes the database requirements, system design, interfaces, and future enhancements.

Structural, Thermal, and Optical Performance (STOP) Modeling and Results for the James Webb Space Telescope Integrated Science Instrument Module

NASA Technical Reports Server (NTRS)

Gracey, Renee; Bartoszyk, Andrew; Cofie, Emmanuel; Comber, Brian; Hartig, George; Howard, Joseph; Sabatke, Derek; Wenzel, Greg; Ohl, Raymond

2016-01-01

The James Webb Space Telescope includes the Integrated Science Instrument Module (ISIM) element that contains four science instruments (SI) including a Guider. We performed extensive structural, thermal, and optical performance(STOP) modeling in support of all phases of ISIM development. In this paper, we focus on modeling and results associated with test and verification. ISIMs test program is bound by ground environments, mostly notably the 1g and test chamber thermal environments. This paper describes STOP modeling used to predict ISIM system performance in 0g and at various on-orbit temperature environments. The predictions are used to project results obtained during testing to on-orbit performance.

When does mass screening for open neural tube defects in low-risk pregnancies result in cost savings?

PubMed Central

Tosi, L L; Detsky, A S; Roye, D P; Morden, M L

1987-01-01

Using a decision analysis model, we estimated the savings that might be derived from a mass prenatal screening program aimed at detecting open neural tube defects (NTDs) in low-risk pregnancies. Our baseline analysis showed that screening v. no screening could be expected to save approximately $8 per pregnancy given a cost of $7.50 for the maternal serum alpha-feto-protein (MSAFP) test and a cost of $42,507 for hospital and rehabilitation services for the first 10 years of life for a child with spina bifida. When a more liberal estimate of the costs of caring for such a child was used, the savings with the screening program were more substantial. We performed extensive sensitivity analyses, which showed that the savings were somewhat sensitive to the cost of the MSAFP test and highly sensitive to the specificity (but not the sensitivity) of the test. A screening program for NTDs in low-risk pregnancies may result in substantial savings in direct health care costs if the screening protocol is followed rigorously and efficiently. PMID:2433011

Mechanism Development, Testing, and Lessons Learned for the Advanced Resistive Exercise Device

NASA Technical Reports Server (NTRS)

Lamoreaux, Christopher D.; Landeck, Mark E.

2006-01-01

The Advanced Resistive Exercise Device (ARED) has been developed at NASA Johnson Space Center, for the International Space Station (ISS) program. ARED is a multi-exercise, high-load resistive exercise device, designed for long duration, human space missions. ARED will enable astronauts to effectively maintain their muscle strength and bone mass in the micro-gravity environment more effectively than any other existing devices. ARED's resistance is provided via two, 20.3 cm (8 in) diameter vacuum cylinders, which provide a nearly constant resistance source. ARED also has a means to simulate the inertia that is felt during a 1-G exercise routine via the flywheel subassembly, which is directly tied to the motion of the ARED cylinders. ARED is scheduled to fly on flight ULF 2 to the ISS and will be located in Node 1. Presently, ARED is in the middle of its qualification and acceptance test program. An extensive testing program and engineering evaluation has increased the reliability of ARED by bringing potential design issues to light before flight production. Some of those design issues, resolutions, and design details will be discussed in this paper.

Numerical modeling of exciton-polariton Bose-Einstein condensate in a microcavity

NASA Astrophysics Data System (ADS)

Voronych, Oksana; Buraczewski, Adam; Matuszewski, Michał; Stobińska, Magdalena

2017-06-01

A novel, optimized numerical method of modeling of an exciton-polariton superfluid in a semiconductor microcavity was proposed. Exciton-polaritons are spin-carrying quasiparticles formed from photons strongly coupled to excitons. They possess unique properties, interesting from the point of view of fundamental research as well as numerous potential applications. However, their numerical modeling is challenging due to the structure of nonlinear differential equations describing their evolution. In this paper, we propose to solve the equations with a modified Runge-Kutta method of 4th order, further optimized for efficient computations. The algorithms were implemented in form of C++ programs fitted for parallel environments and utilizing vector instructions. The programs form the EPCGP suite which has been used for theoretical investigation of exciton-polaritons. Catalogue identifier: AFBQ_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AFBQ_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: BSD-3 No. of lines in distributed program, including test data, etc.: 2157 No. of bytes in distributed program, including test data, etc.: 498994 Distribution format: tar.gz Programming language: C++ with OpenMP extensions (main numerical program), Python (helper scripts). Computer: Modern PC (tested on AMD and Intel processors), HP BL2x220. Operating system: Unix/Linux and Windows. Has the code been vectorized or parallelized?: Yes (OpenMP) RAM: 200 MB for single run Classification: 7, 7.7. Nature of problem: An exciton-polariton superfluid is a novel, interesting physical system allowing investigation of high temperature Bose-Einstein condensation of exciton-polaritons-quasiparticles carrying spin. They have brought a lot of attention due to their unique properties and potential applications in polariton-based optoelectronic integrated circuits. This is an out-of-equilibrium quantum system confined within a semiconductor microcavity. It is described by a set of nonlinear differential equations similar in spirit to the Gross-Pitaevskii (GP) equation, but their unique properties do not allow standard GP solving frameworks to be utilized. Finding an accurate and efficient numerical algorithm as well as development of optimized numerical software is necessary for effective theoretical investigation of exciton-polaritons. Solution method: A Runge-Kutta method of 4th order was employed to solve the set of differential equations describing exciton-polariton superfluids. The method was fitted for the exciton-polariton equations and further optimized. The C++ programs utilize OpenMP extensions and vector operations in order to fully utilize the computer hardware. Running time: 6h for 100 ps evolution, depending on the values of parameters

75 FR 15693 - Extension of Web-Based TRICARE Assistance Program Demonstration Project

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-30

... DEPARTMENT OF DEFENSE Office of the Secretary Extension of Web-Based TRICARE Assistance Program Demonstration Project AGENCY: Department of Defense (DoD). ACTION: Notice of a Web-Based TRICARE Assistance... States Code, Section 1092, entitled Web-Based TRICARE Assistance Program. This demonstration was...

A best practice fall prevention exercise program to improve balance, strength / power, and psychosocial health in older adults: study protocol for a randomized controlled trial

PubMed Central

2013-01-01

Background With increasing age neuromuscular deficits (e.g., sarcopenia) may result in impaired physical performance and an increased risk for falls. Prominent intrinsic fall-risk factors are age-related decreases in balance and strength / power performance as well as cognitive decline. Additional studies are needed to develop specifically tailored exercise programs for older adults that can easily be implemented into clinical practice. Thus, the objective of the present trial is to assess the effects of a fall prevention program that was developed by an interdisciplinary expert panel on measures of balance, strength / power, body composition, cognition, psychosocial well-being, and falls self-efficacy in healthy older adults. Additionally, the time-related effects of detraining are tested. Methods/Design Healthy old people (n = 54) between the age of 65 to 80 years will participate in this trial. The testing protocol comprises tests for the assessment of static / dynamic steady-state balance (i.e., Sharpened Romberg Test, instrumented gait analysis), proactive balance (i.e., Functional Reach Test; Timed Up and Go Test), reactive balance (i.e., perturbation test during bipedal stance; Push and Release Test), strength (i.e., hand grip strength test; Chair Stand Test), and power (i.e., Stair Climb Power Test; countermovement jump). Further, body composition will be analysed using a bioelectrical impedance analysis system. In addition, questionnaires for the assessment of psychosocial (i.e., World Health Organisation Quality of Life Assessment-Bref), cognitive (i.e., Mini Mental State Examination), and fall risk determinants (i.e., Fall Efficacy Scale – International) will be included in the study protocol. Participants will be randomized into two intervention groups or the control / waiting group. After baseline measures, participants in the intervention groups will conduct a 12-week balance and strength / power exercise intervention 3 times per week, with each training session lasting 30 min. (actual training time). One intervention group will complete an extensive supervised training program, while the other intervention group will complete a short version ('3 times 3’) that is home-based and controlled by weekly phone calls. Post-tests will be conducted right after the intervention period. Additionally, detraining effects will be measured 12 weeks after program cessation. The control group / waiting group will not participate in any specific intervention during the experimental period, but will receive the extensive supervised program after the experimental period. Discussion It is expected that particularly the supervised combination of balance and strength / power training will improve performance in variables of balance, strength / power, body composition, cognitive function, psychosocial well-being, and falls self-efficacy of older adults. In addition, information regarding fall risk assessment, dose–response-relations, detraining effects, and supervision of training will be provided. Further, training-induced health-relevant changes, such as improved performance in activities of daily living, cognitive function, and quality of life, as well as a reduced risk for falls may help to lower costs in the health care system. Finally, practitioners, therapists, and instructors will be provided with a scientifically evaluated feasible, safe, and easy-to-administer exercise program for fall prevention. Trial registration ClinicalTrials.gov Identifier: NCT01906034 PMID:24106864

High-Speed Cycling Intervention Improves Rate-Dependent Mobility in Older Adults

PubMed Central

Bellumori, Maria; Uygur, Mehmet; Knight, Christopher A.

2016-01-01

PURPOSE The aim was to determine the feasibility of a six-week speed-based exercise program that could be used to initiate new exercise behaviors and improve rapid movement in older adults approaching frailty. METHODS The intervention group included 14 older adults (3 males, 11 females, mean (SD) age: 70 (7.6) years, height: 1.6 (.11) m, mass: 76.8 (12.0) kg, BMI: 27.7(4.7)). The control group included 12 older adults (6 males, 6 females, mean (SD) age: 69.2 (6.9) years, height: 1.7 (.09) m, mass: 78.2 (10.9) kg, BMI: 25.3 (2.7)). Subjects included active older adults, including regular exercisers, but none were engaged in sports or exercises with an emphasis on speed (e.g. cycling spin classes or tennis). Stationary recumbent cycling was selected to minimize fall risk and low pedaling resistance reduced musculoskeletal and cardiovascular load. Two weekly 30-minute exercise sessions consisted of interval training in which subjects pedaled at preferred cadence and performed ten 20-s fast cadence intervals separated by 40-s of active recovery at preferred cadence. RESULTS Significant Group by Time interactions (p<.05) supported a 2-s improvement in the timed up and go test and a 34% improvement in rapid isometric knee extension contractions in the exercise group but not in controls. Central neural adaptations are suggested because this lower extremity exercise program also elicited significant improvements in the untrained upper extremities of the exercise group (elbow extension RFD-SF and 9-Hole Peg Test, p<.05). CONCLUSION These results demonstrate that a relatively low dose of speed-based exercise can improve neuromuscular function and tests of mobility in older adults. Such a program serves as a sensible precursor to subsequent, more vigorous training or as an adjunct to a program where a velocity emphasis is lacking. PMID:27501360

KSC-2009-3670

NASA Image and Video Library

2009-06-11

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly (comprising the frustum, forward skirt extension and forward skirt) begins to move out of the Assembly and Refurbishment Facility. It is being transferred to the Vehicle Assembly Building for stacking operations with other segments. Ares I-X is the flight test for the Ares I which will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with Ares I, which is part of the Constellation Program to return men to the moon and beyond. Launch of the Ares I-X flight test is targeted for August 2009. Photo credit: NASA/Jack Pfaller

KSC-2009-3669

NASA Image and Video Library

2009-06-11

CAPE CANAVERAL, Fla. – In the Assembly and Refurbishment Facility at NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly (comprising the frustum, forward skirt extension and forward skirt) is ready to be moved to the Vehicle Assembly Building for stacking operations with other segments. Ares I-X is the flight test for the Ares I which will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with Ares I, which is part of the Constellation Program to return men to the moon and beyond. Launch of the Ares I-X flight test is targeted for August 2009. Photo credit: NASA/Jack Pfaller

CV-990 LSRA

NASA Image and Video Library

1992-05-27

A NASA CV-990, modified as a Landing Systems Research Aircraft (LSRA), is serviced on the ramp at NASA's Dryden Flight Research Center, Edwards, California, before a test of the space shuttle landing gear system. The space shuttle landing gear test unit, operated by a high-pressure hydraulic system, allowed engineers to assess and document the performance of space shuttle main and nose landing gear systems, tires and wheel assemblies, plus braking and nose wheel steering performance. The series of 155 test missions for the space shuttle program provided extensive data about the life and endurance of the shuttle tire systems and helped raise the shuttle crosswind landing limits at Kennedy.

Statistical power analyses using G*Power 3.1: tests for correlation and regression analyses.

PubMed

Faul, Franz; Erdfelder, Edgar; Buchner, Axel; Lang, Albert-Georg

2009-11-01

G*Power is a free power analysis program for a variety of statistical tests. We present extensions and improvements of the version introduced by Faul, Erdfelder, Lang, and Buchner (2007) in the domain of correlation and regression analyses. In the new version, we have added procedures to analyze the power of tests based on (1) single-sample tetrachoric correlations, (2) comparisons of dependent correlations, (3) bivariate linear regression, (4) multiple linear regression based on the random predictor model, (5) logistic regression, and (6) Poisson regression. We describe these new features and provide a brief introduction to their scope and handling.

LSRA landing with tire test

NASA Technical Reports Server (NTRS)

1994-01-01

A space shuttle landing gear system is visible between the two main landing gear components on this NASA CV-990, modified as a Landing Systems Research Aircraft (LSRA). The space shuttle landing gear test unit, operated by a high-pressure hydraulic system, allowed engineers to assess and document the performance of space shuttle main and nose landing gear systems, tires and wheel assemblies, plus braking and nose wheel steering performance. The series of 155 test missions for the space shuttle program, conducted at NASA's Dryden Flight Research Center, Edwards, California, provided extensive data about the life and endurance of the shuttle tire systems and helped raise the shuttle crosswind landing limits at Kennedy.

Application of a motivation-behavioral skills protocol in gingival lichen planus: a short-term study.

PubMed

López-Jornet, Pia; Camacho-Alonso, Fabio

2010-10-01

The main objective of the present study was to assess the efficacy of a motivation–behavioral skills protocol for plaque control in patients with gingival lichen planus. A pre- and post-test descriptive clinical study was made of 40 consecutive white patients with gingival lichen planus: five males (12.5%) and 35 females (87.5%); mean age: 57 years. A motivation–behavioral skills protocol for oral hygiene was applied, with the determination of gingival scores (gingival index, plaque extension, and Community Periodontal Index of Treatment Needs [CPITN]) and patient evaluation after 4 and 8 weeks. The clinical parameters in relation to the different forms of gingival lichen planus showed statistically significant improvements for gingival index, plaque extension, and CPITN (P <0.001) as determined 4 and 8 weeks after starting the program. The application of an active prevention program in patients with gingival lichen planus is important because it offers benefits for periodontal health. However, more long-term studies are needed to confirm the results obtained.

Agricultural Extension Agents' Perceptions of Effective Teaching Strategies for Adult Learners in the Master Beef Producer Program

ERIC Educational Resources Information Center

Strong, Robert; Harder, Amy; Carter, Hannah

2010-01-01

The purpose of the study reported here was to explore and describe how Extension agents selected teaching strategies for adult audiences. Andragogy is hypotheses concerning the attributes of adult learners (Knowles, Swanson, & Holton III, 2005). Extension agents responsible for teaching the Master Beef Producer (MBP) program were purposively…

Attitudes of County Leaders toward Expanding Adult Programs in Extension: Minnesota Expansion Study I.

ERIC Educational Resources Information Center

Wilson, Duane A.; And Others

A study was conducted in Minnesota on attitudes of county leaders (commissioners, auditors, and appointed Extension committee members) on ways of expanding Extension programs. In each county data were gathered by questionnaire from at least two thirds of the leaders. Questions were asked about expansion (1) through working with other…

Perceptions of 1987 Master Gardener Participants toward the Use of Satellite Telecommunications for Educational/Extension Delivery.

ERIC Educational Resources Information Center

Eckles, Stephen G.; Miller, W. Wade

The 1987 Master Gardener program was presented at 16 locations in Iowa, where weekday sessions were supplemented with Saturday satellite telecasts. This cooperative extension service program provided special training in horticulture to members of the local community who would then work as volunteers through their local cooperative extension office…

Improving Healthy Living Youth Development Program Outreach in Extension: Lessons Learned from the 4-H Health Rocks! Program

ERIC Educational Resources Information Center

Kumaran, Muthusami; Fogarty, Kate; Fung, Whitney M.; Terminello, Amanda

2015-01-01

This article discusses a qualitative evaluation of the Florida 4-H Health Rocks! program aimed at youth alcohol, tobacco, and other drug use prevention. A questionnaire was distributed to Extension professionals across Florida to gain insight into the strengths and barriers they faced with programming. Programmatic strengths included targeting a…

78 FR 63464 - William D. Ford Federal Direct Loan Program Repayment Plan Selection Form; Extension of Public...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... DEPARTMENT OF EDUCATION William D. Ford Federal Direct Loan Program Repayment Plan Selection Form; Extension of Public Comment Period; Correction AGENCY: Department of Education. ACTION: Correction notice... entitled, ``William D. Ford Federal Direct Loan Program Repayment Plan Selection Form''. ED is extending...

75 FR 45563 - Terrorism Risk Insurance Program; Final Netting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-03

... DEPARTMENT OF THE TREASURY 31 CFR Part 50 RIN 1505-AC24 Terrorism Risk Insurance Program; Final... Title I of the Terrorism Risk Insurance Act of 2002 (``TRIA'' or ``the Act''), as amended by the Terrorism Risk Insurance Extension Act of 2005 (``Extension Act'') and the Terrorism Risk Insurance Program...

78 FR 66670 - Housing Counseling Program: New Certification Requirements; Extension of Public Comment Period

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

... Counseling Program: New Certification Requirements; Extension of Public Comment Period AGENCY: Office of the... inviting public comment on proposed changes to the Housing Counseling Program regulations for the purpose... housing counseling statute. This document announces that HUD is extending the public comment period, for...

Emergency Food Programs: Untapped Opportunities for Extension?

ERIC Educational Resources Information Center

Mobley, Amy R.

2012-01-01

This article reports results from a questionnaire that assessed the frequency and type of nutrition questions asked at emergency food programs to determine if Extension professionals need to increase direct outreach efforts. Emergency food program workers (n = 460) were recruited via mail to complete a self-administered survey. More than one-third…

78 FR 65621 - Implementation of Title I/II Program Initiatives; Extension of Public Comment Period; Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-01

... DEPARTMENT OF EDUCATION Implementation of Title I/II Program Initiatives; Extension of Public Comment Period; Correction AGENCY: Department of Education. ACTION: Correction notice. SUMMARY: On October... Title I/II Program Initiatives,'' Docket ID ED- 2013-ICCD-0090. The comment period for this information...

Meeting Extension Programming Needs with Technology: A Case Study of Agritourism Webinars

ERIC Educational Resources Information Center

Rich, Samantha Rozier; Komar, Stephen; Schilling, Brian; Tomas, Stacy R.; Carleo, Jenny; Colucci, Susan J.

2011-01-01

As clientele needs diversify, Extension educators are examining new technologies, including online tools, to deliver educational programming and resources. Using agritourism as the educational topic, the study reported here sought to evaluate participants' acceptance of online educational programming (webinars) and the effectiveness of the…

ASC FY17 Implementation Plan, Rev. 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, P. G.

The Stockpile Stewardship Program (SSP) is an integrated technical program for maintaining the safety, surety, and reliability of the U.S. nuclear stockpile. The SSP uses nuclear test data, computational modeling and simulation, and experimental facilities to advance understanding of nuclear weapons. It includes stockpile surveillance, experimental research, development and engineering programs, and an appropriately scaled production capability to support stockpile requirements. This integrated national program requires the continued use of experimental facilities and programs, and the computational capabilities to support these programs. The Advanced Simulation and Computing Program (ASC) is a cornerstone of the SSP, providing simulation capabilities and computationalmore » resources that support annual stockpile assessment and certification, study advanced nuclear weapons design and manufacturing processes, analyze accident scenarios and weapons aging, and provide the tools to enable stockpile Life Extension Programs (LEPs) and the resolution of Significant Finding Investigations (SFIs). This requires a balance of resources, including technical staff, hardware, simulation software, and computer science solutions.« less

SOLPOL: A Solar Polarimeter for Hard X-Rays and Gamma-Rays

NASA Technical Reports Server (NTRS)

McConnell, Michael L.

1999-01-01

Th goal of this project was to continue the development of a hard X-ray polarimeter for studying solar flares. In earlier work (funded by a previous SR&T grant), we had already achieved several goals, including the following: 1) development of a means of producing a polarized radiation source in the lab that could be used for prototype development; 2) demonstrated the basic Compton scatter polarimeter concept using a simple laboratory setup; 3) used the laboratory results to verify our Monte Carlo simulations; and 4) investigated various detector technologies that could be incorporated into the polarimeter design. For the current one-year program, we wanted to fabricate and test a laboratory science model based on our SOLPOL (Solar Polarimeter) design. The long-term goal of this effort is to develop and test a prototype design that could be used to study flare emissions from either a balloon- or space-borne platform. The current program has achieved its goal of fabricating and testing a science model of the SOLPOL design, although additional testing of the design (and detailed comparison with Monte Carlo simulations) is still desired. This one-year program was extended by six months (no-cost extension) to cover the summer of 1999, when undergraduate student support was available to complete some of the laboratory testing.

Secretary's report to Congress. Secretary's statement, program review and outlook

NASA Astrophysics Data System (ADS)

1982-08-01

All elements of the Department of Energy are discussed. Three annexes are included: the Fifth Report to Congress - Comprehensive Program and Plan for Federal Energy Education, Extension, and Information Activities (Published December 1981 by the Office of State and Local Programs, Office of Conservation and Renewable Energy, US Department of Energy); Third Annual Report to Congress on the Automotive Technology Development Program (Published February 16, 1982, by the Office of Vehicle and Engine Research and Development, Office of Conservation and Renewable Energy,US Department of Energy); and Observations and Recommendations on the Future of the Energy Extension Service Program; Fourth Report by the National Energy Extension Service Advisory Board (Published January 182 by the Office of State and Local Programs, Office of Conservation and Renewable Energy, US Department of Energy).

Prediction of thermal cycling induced cracking in polmer matrix composites

NASA Technical Reports Server (NTRS)

Mcmanus, Hugh L.

1994-01-01

The work done in the period August 1993 through February 1994 on the 'Prediction of Thermal Cycling Induced Cracking In Polymer Matrix Composites' program is summarized. Most of the work performed in this period, as well as the previous one, is described in detail in the attached Master's thesis, 'Analysis of Thermally Induced Damage in Composite Space Structures,' by Cecelia Hyun Seon Park. Work on a small thermal cycling and aging chamber was concluded in this period. The chamber was extensively tested and calibrated. Temperatures can be controlled very precisely, and are very uniform in the test chamber. Based on results obtained in the previous period of this program, further experimental progressive cracking studies were carried out. The laminates tested were selected to clarify the differences between the behaviors of thick and thin ply layers, and to explore other variables such as stacking sequence and scaling effects. Most specimens tested were made available from existing stock at Langley Research Center. One laminate type had to be constructed from available prepreg material at Langley Research Center. Specimens from this laminate were cut and prepared at MIT. Thermal conditioning was carried out at Langley Research Center, and at the newly constructed MIT facility. Specimens were examined by edge inspection and by crack configuration studies, in which specimens were sanded down in order to examine the distribution of cracks within the specimens. A method for predicting matrix cracking due to decreasing temperatures and/or thermal cycling in all plies of an arbitrary laminate was implemented as a computer code. The code also predicts changes in properties due to the cracking. Extensive correlations between test results and code predictions were carried out. The computer code was documented and is ready for distribution.

Structural strengthening of rocket nozzle extension by means of laser metal deposition

NASA Astrophysics Data System (ADS)

Honoré, M.; Brox, L.; Hallberg, M.

2012-03-01

Commercial space operations strive to maximize the payload per launch in order to minimize the costs of each kg launched into orbit; this yields demand for ever larger launchers with larger, more powerful rocket engines. Volvo Aero Corporation in collaboration with Snecma and Astrium has designed and tested a new, upgraded Nozzle extension for the Vulcain 2 engine configuration, denoted Vulcain 2+ NE Demonstrator The manufacturing process for the welding of the sandwich wall and the stiffening structure is developed in close cooperation with FORCE Technology. The upgrade is intended to be available for future development programs for the European Space Agency's (ESA) highly successful commercial launch vehicle, the ARIANE 5. The Vulcain 2+ Nozzle Extension Demonstrator [1] features a novel, thin-sheet laser-welded configuration, with laser metal deposition built-up 3D-features for the mounting of stiffening structure, flanges and for structural strengthening, in order to cope with the extreme load- and thermal conditions, to which the rocket nozzle extension is exposed during launch of the 750 ton ARIANE 5 launcher. Several millimeters of material thickness has been deposited by laser metal deposition without disturbing the intricate flow geometry of the nozzle cooling channels. The laser metal deposition process has been applied on a full-scale rocket nozzle demonstrator, and in excess of 15 kilometers of filler wire has been successfully applied to the rocket nozzle. The laser metal deposition has proven successful in two full-throttle, full-scale tests, firing the rocket engine and nozzle in the ESA test facility P5 by DLR in Lampoldshausen, Germany.

Use of gene-expression programming to estimate Manning’s roughness coefficient for high gradient streams

USGS Publications Warehouse

Azamathulla, H. Md.; Jarrett, Robert D.

2013-01-01

Manning’s roughness coefficient (n) has been widely used in the estimation of flood discharges or depths of flow in natural channels. Therefore, the selection of appropriate Manning’s nvalues is of paramount importance for hydraulic engineers and hydrologists and requires considerable experience, although extensive guidelines are available. Generally, the largest source of error in post-flood estimates (termed indirect measurements) is due to estimates of Manning’s n values, particularly when there has been minimal field verification of flow resistance. This emphasizes the need to improve methods for estimating n values. The objective of this study was to develop a soft computing model in the estimation of the Manning’s n values using 75 discharge measurements on 21 high gradient streams in Colorado, USA. The data are from high gradient (S > 0.002 m/m), cobble- and boulder-bed streams for within bank flows. This study presents Gene-Expression Programming (GEP), an extension of Genetic Programming (GP), as an improved approach to estimate Manning’s roughness coefficient for high gradient streams. This study uses field data and assessed the potential of gene-expression programming (GEP) to estimate Manning’s n values. GEP is a search technique that automatically simplifies genetic programs during an evolutionary processes (or evolves) to obtain the most robust computer program (e.g., simplify mathematical expressions, decision trees, polynomial constructs, and logical expressions). Field measurements collected by Jarrett (J Hydraulic Eng ASCE 110: 1519–1539, 1984) were used to train the GEP network and evolve programs. The developed network and evolved programs were validated by using observations that were not involved in training. GEP and ANN-RBF (artificial neural network-radial basis function) models were found to be substantially more effective (e.g., R2 for testing/validation of GEP and RBF-ANN is 0.745 and 0.65, respectively) than Jarrett’s (J Hydraulic Eng ASCE 110: 1519–1539, 1984) equation (R2 for testing/validation equals 0.58) in predicting the Manning’s n.

Laterally Loaded Partially Prestressed Concrete Piles

DTIC Science & Technology

1989-09-01

of an extensive test program onl laterali y ioadeu. partially pr- estressed concrete fender piles. The study Included service load range as well ats...12,000-psi design strength). Configura- tion G utilized 14 r:- estress strand, in an unsymmetric pattern. To provide a uniform concrete prestress of 540...sudden loss in load carrying capacity directly related to the loss of concrete area. The compression concrete fractured longitudinally and along the

PROJECT HEAD START--SUMMER 1966. FINAL REPORT. SECTION ONE, SOME CHARACTERISTICS OF CHILDREN IN THE HEAD START PROGRAM.

ERIC Educational Resources Information Center

STEWART, E. ELIZABETH; WILLIAMS, RICHARD H.

THIS DOCUMENT IS SECTION 1 OF A 3-PART REPORT BY THE EDUCATIONAL TESTING SERVICE. THIS SECTION DESCRIBES, IN EXTENSIVE STATISTICAL TERMS, A SAMPLE OF 445 HEAD START CHILDREN IN TERMS OF THEIR SCORES ON (1) THE STANFORD-BINET L-M, (2) THE CALDWELL PRESCHOOL INVENTORY, AND (3) THE PROJECT HEAD START BEHAVIOR INVENTORY. THE SAMPLING PROCEDURES USED…

Cooperative Extension as a Framework for Health Extension: The Michigan State University Model.

PubMed

Dwyer, Jeffrey W; Contreras, Dawn; Eschbach, Cheryl L; Tiret, Holly; Newkirk, Cathy; Carter, Erin; Cronk, Linda

2017-10-01

The Affordable Care Act charged the Agency for Healthcare Research and Quality to create the Primary Care Extension Program, but did not fund this effort. The idea to work through health extension agents to support health care delivery systems was based on the nationally known Cooperative Extension System (CES). Instead of creating new infrastructure in health care, the CES is an ideal vehicle for increasing health-related research and primary care delivery. The CES, a long-standing component of the land-grant university system, features a sustained infrastructure for providing education to communities. The Michigan State University (MSU) Model of Health Extension offers another means of developing a National Primary Care Extension Program that is replicable in part because of the presence of the CES throughout the United States. A partnership between the MSU College of Human Medicine and MSU Extension formed in 2014, emphasizing the promotion and support of human health research. The MSU Model of Health Extension includes the following strategies: building partnerships, preparing MSU Extension educators for participation in research, increasing primary care patient referrals and enrollment in health programs, and exploring innovative funding. Since the formation of the MSU Model of Health Extension, researchers and extension professionals have made 200+ connections, and grants have afforded savings in salary costs. The MSU College of Human Medicine and MSU Extension partnership can serve as a model to promote health partnerships nationwide between CES services within land-grant universities and academic health centers or community-based medical schools.

75 FR 30385 - Defense Transportation Regulation, Part IV

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-01

... extensions will be considered due to the timelines associated with funding and programming future Phase III... extensions will be considered due to the timelines associated with funding and programming future Phase III...

Analysis of Chemical Bioactivity through In Vitro Profiling ...

EPA Pesticide Factsheets

Safety assessment of drugs and environmental chemicals relies extensively on animal testing. However, the quantity of chemicals needing assessment and challenges of species extrapolation drive the development of alternative approaches. The EPA’s ToxCast and the multiagency Tox21 programs address this through use of an extensive in vitro screening program to generate data on a large library of important environmental chemicals. These in vitro assays encompass both cell-free, biochemical assays targeting proteins that may be potential molecular initiating events and cellular assays that provide coverage of critical signaling pathways and toxicity phenotypes. Effects on model organisms such as the developing zebrafish, are also part of the testing strategy. A variety of computational approaches are used to analyze the resulting complex data sets to gain insight in to inherent biological activity of chemicals and possible mechanisms of toxicity. Several case studies including identification of modulators of estrogen receptor and aromatic hydrocarbon receptor pathways with effects in primary human cell systems will be described. In addition, existing in vivo data from a subset of the chemicals was used to anchor predictive models using in vitro data for a number of adverse endpoints including reproductive and developmental toxicities. The strengths and weaknesses of this approach will be described. This work does not necessarily reflect official Agency policy. Pres

Development and testing of tip devices for horizontal axis wind turbines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gyatt, G.W.; Lissaman, P.B.S.

1985-05-01

A theoretical and field experimental program has been carried out to investigate the use of tip devices on horizontal axis wind turbine rotors. Objective was to improve performance by the reduction of tip losses. A vortex lattice computer model was used to optimize three basic tip configuration types for a 25 kW stall limited commercial wind turbines. The types were a change in tip planform, and a single-element and double-element nonplannar tip extension (winglets). Approximately 270 h of performance data were collected over a three-month period. The sampling interval was 2.4 s; thus over 400,000 raw data points were logged.more » Results for each of the three new tip devices, compared with the original tip, showed a small decrease (of the order of 1 kW) in power output over the measured range of wind speeds from cut-in at about 4 m/s to over 20 m/s, well into the stall limiting region. For aircraft wing tip devices, favorable tip shapes have been reported and it is likely that the tip devices tested in this program did not improve rotor performance because they were not optimally adjusted. The computer model used does not have adequate lifting surface resolution or accuracy to design these small winglet extensions.« less

Using GIS to analyze animal movements in the marine environment

USGS Publications Warehouse

Hooge, Philip N.; Eichenlaub, William M.; Solomon, Elizabeth K.; Kruse, Gordon H.; Bez, Nicolas; Booth, Anthony; Dorn, Martin W.; Hills, Susan; Lipcius, Romuald N.; Pelletier, Dominique; Roy, Claude; Smith, Stephen J.; Witherell, David B.

2001-01-01

Advanced methods for analyzing animal movements have been little used in the aquatic research environment compared to the terrestrial. In addition, despite obvious advantages of integrating geographic information systems (GIS) with spatial studies of animal movement behavior, movement analysis tools have not been integrated into GIS for either aquatic or terrestrial environments. We therefore developed software that integrates one of the most commonly used GIS programs (ArcView®) with a large collection of animal movement analysis tools. This application, the Animal Movement Analyst Extension (AMAE), can be loaded as an extension to ArcView® under multiple operating system platforms (PC, Unix, and Mac OS). It contains more than 50 functions, including parametric and nonparametric home range analyses, random walk models, habitat analyses, point and circular statistics, tests of complete spatial randomness, tests for autocorrelation and sample size, point and line manipulation tools, and animation tools. This paper describes the use of these functions in analyzing animal location data; some limited examples are drawn from a sonic-tracking study of Pacific halibut (Hippoglossus stenolepis) in Glacier Bay, Alaska. The extension is available on the Internet at www.absc.usgs.gov/glba/gistools/index.htm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Thomas M.; Berndt, Markus; Baglietto, Emilio

The purpose of this report is to document a multi-year plan for enhancing turbulence modeling in Hydra-TH for the Consortium for Advanced Simulation of Light Water Reactors (CASL) program. Hydra-TH is being developed to the meet the high- fidelity, high-Reynolds number CFD based thermal hydraulic simulation needs of the program. This work is being conducted within the thermal hydraulics methods (THM) focus area. This report is an extension of THM CASL milestone L3:THM.CFD.P10.02 [33] (March, 2015) and picks up where it left off. It will also serve to meet the requirements of CASL THM level three milestone, L3:THM.CFD.P11.04, scheduled formore » completion September 30, 2015. The objectives of this plan will be met by: maturation of recently added turbulence models, strategic design/development of new models and systematic and rigorous testing of existing and new models and model extensions. While multi-phase turbulent flow simulations are important to the program, only single-phase modeling will be considered in this report. Large Eddy Simulation (LES) is also an important modeling methodology. However, at least in the first year, the focus is on steady-state Reynolds Averaged Navier-Stokes (RANS) turbulence modeling.« less

Effect of an eccentrically biased hamstring strengthening home program on knee flexor strength and the length-tension relationship.

PubMed

Orishimo, Karl F; McHugh, Malachy P

2015-03-01

The purposes of this study were to document relative activation intensities of the hamstrings and gluteus maximus during 4 eccentric hamstring strengthening exercises and to assess the effects of a short-term strengthening program comprised of these exercises on knee flexor strength and the length-tension relationship. Twelve healthy subjects participated in this study. Electromyographic (EMG) activities from the biceps femoris, semitendinosus, and gluteus maximus were recorded as subjects performed (a) standing hip extension with elastic resistance, (b) trunk flexion in single limb stance (diver), (c) standing split (glider), and (d) supine sliding bridge (slider). Baseline isometric knee flexor strength was measured at 90, 70, 50, and 30° of flexion at the knee with the subject seated and the hip flexed to 50° from horizontal. After completing the 4-week training program, strength tests were repeated. Repeated-measures analysis of variance were used to compare EMG activity between muscles and to assess angle-specific strength improvements. Hamstring activity exceeded gluteus maximus activity for resisted hip extension, glider, and slider exercises (p < 0.001) but not for the diver (p = 0.087). Hamstring activation was greatest during the slider and resisted hip extension and lowest during the glider and the diver. Knee flexor strength improved by 9.0% (p = 0.005) but was not angle specific (training by angle p = 0.874). The short-term home training program effectively targeted the hamstrings and resulted in strength gains that were similar at short and long muscle lengths. These data demonstrate that hamstring strength can be improved using eccentrically biased unilateral exercises without the use of weights or other equipments.

Effect of a walking skill training program in patients who have undergone total hip arthroplasty: Followup one year after surgery.

PubMed

Heiberg, Kristi Elisabeth; Bruun-Olsen, Vigdis; Ekeland, Arne; Mengshoel, Anne Marit

2012-03-01

To investigate the effect of a 12-session walking skill training program of weight-bearing activities on physical functioning and self-efficacy initiated in patients 3 months after total hip arthroplasty (THA). Sixty-eight patients with THA, 35 women and 33 men, with a mean age of 66 years (95% confidence interval [95% CI] 64, 67 years), were randomized to a training group (n = 35) or a control group without physiotherapy (n = 33). Assessments were performed before the intervention at 3 months (pretest), at 5 months (posttest 1), and at 12 months (posttest 2) after surgery. The primary outcome was the 6-minute walk test (6MWT). The secondary outcomes were the stair climbing test (ST); figure-of-eight test; Index of Muscle Function (IMF); active hip range of motion (ROM) in flexion, extension, and abduction; Harris Hip Score (HHS); self-efficacy; and Hip Dysfunction and Osteoarthritis Outcome Score. The training group had larger improvements than the control group at posttest 1 on the 6MWT with an adjusted mean difference of 52 meters (95% CI 29, 74 meters; P < 0.001) and on the ST of -1 second (95% CI -2, 0 seconds; P = 0.01).There were also improvements on the figure-of-eight test (P = 0.02), IMF (P = 0.001), active hip ROM in extension (P = 0.02), HHS (P = 0.05), and self-efficacy (P = 0.04). The difference between the groups persisted at posttest 2 on the 6MWT of 52 meters (95% CI 24, 80 meters; P < 0.001) and on the ST of -1 second (95% CI -3, 0 seconds; P = 0.05). The walking skill training program was effective, especially in improving walking both immediately after the intervention and 1 year after THA surgery. Copyright © 2012 by the American College of Rheumatology.

78 FR 76628 - Pilot Program for Parallel Review of Medical Products; Extension of the Duration of the Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-18

...The Food and Drug Administration (FDA) and the Centers for Medicare and Medicaid Services (CMS) (the Agencies) are announcing the extension of the ``Pilot Program for Parallel Review of Medical Products.'' The Agencies have decided to continue the program as currently designed for an additional period of 2 years from the date of publication of this notice.

Developing a Contemporary Dairy Foods Extension Program: A Training and Technical Resource Needs Assessment of Pennsylvania Dairy Foods Processors

ERIC Educational Resources Information Center

Syrko, Joseph; Kaylegian, Kerry E.

2015-01-01

Growth in the dairy industry and the passage of the Food Safety Modernization Act have renewed interest in dairy foods processing extension positions. A needs assessment survey was sent to Pennsylvania dairy processors and raw milk providers to guide priorities for a dairy foods extension program. The successful development and delivery of…

You're on Camera---in Color; A Television Handbook for Extension Workers.

ERIC Educational Resources Information Center

Tonkin, Joe

Color television has brought about new concepts of programming and new production requirements. This handbook is designed to aid those Extension workers who are concerned with or will appear on Extension television programs. The book discusses how to make the most of color, what to wear and how to apply makeup for color TV, how colors appear on…

A STUDY OF NORTH CAROLINA AGRICULTURAL EXTENSION AGENTS' PERCEPTION OF THE ROLE OF FERTILIZER DEALERS IN EXTENSION PROGRAMMING.

ERIC Educational Resources Information Center

WOODARD, BRUCE H.

A QUESTIONNAIRE MAILED TO 98 AGRICULTURAL EXTENSION AGENTS IN NORTH CAROLINA WITH PRIMARY RESPONSIBILITY IN AGRONOMY IN THEIR COUNTIES WAS USED TO COLLECT DATA ON THE AGENTS' PERCEPTION OF THE NATURE AND FREQUENCY OF PERFORMANCE BY DEALERS IN SOIL FERTILITY PROGRAMS, AGENTS' FEELINGS ABOUT DEALER PARTICIPATION, AND THE ASSOCIATION BETWEEN AGENTS'…

An Historical Analysis of the Development of Selected Areas of University Extension Programs in the United States, 1900-1965, as Related in Professional Literature.

ERIC Educational Resources Information Center

Jessup, Michael Hyle

This study is concerned with the historical development of certain areas of university extension--credit and noncredit courses, correspondence study, and conferences, institutes, and short courses--which appear widespread and important in current extension programs. Credit and noncredit courses and correspondence study were among the earliest…

78 FR 34962 - American Indian Vocational Rehabilitation Services Program; Proposed Waivers and Extensions of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-11

... Vocational Rehabilitation Services (AIVRS) Program in the Rehabilitation Services Administration (RSA): eight... funds under this program. Further, if the proposed waivers and extensions are made final, RSA would not... that RSA has the authority to make an AIVRS grant effective for more than 60 months, pursuant to...

Raising Awareness of Assistive Technology in Older Adults through a Community-Based, Cooperative Extension Program

ERIC Educational Resources Information Center

Sellers, Debra M.; Markham, Melinda Stafford

2012-01-01

The Fashion an Easier Lifestyle with Assistive Technology (FELAT) curriculum was developed as a needs-based, community educational program provided through a state Cooperative Extension Service. The overall goal for participants was to raise awareness of assistive technology. Program evaluation included a postassessment and subsequent interview to…

A Study of North Carolina Negro Homemakers. Extension Evaluation Study No. 4.

ERIC Educational Resources Information Center

Brown, Minnie Miller; And Others

This statewide study of the home demonstration program in nine representative counties was designed to determine home economics extension program needs, to discover the degree of participation, and to locate people who might profit from the program. Personal interviews were conducted with 498 home demonstration club members and 572 nonmembers.…

Strategic Partnerships that Strengthen Extension's Community-Based Entrepreneurship Programs: An Example from Maine

ERIC Educational Resources Information Center

Bassano, Louis V.; McConnon, James C., Jr.

2011-01-01

This article explains how Extension can enhance and expand its nationwide community-based entrepreneurship programs by developing strategic partnerships with other organizations to create highly effective educational programs for rural entrepreneurs. The activities and impacts of the Down East Micro-Enterprise Network (DEMN), an alliance of three…

76 FR 43649 - Notice of Request for Extension of Approval of an Information Collection; Scrapie in Sheep and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

...; Interstate Movement Restrictions and Indemnity Program AGENCY: Animal and Plant Health Inspection Service... with regulations for the interstate movement of sheep and goats and an indemnity program to control the... Movement Restrictions and Indemnity Program. OMB Number: 0579-0101. Type of Request: Extension of approval...

Wellness Works: A Collaborative Program for Youth and Adults in Rural Utah

ERIC Educational Resources Information Center

Shirley, Lindsey; Roark, Mark F.; Lewis, Lisa

2012-01-01

Utah State University Cooperative Extension programming, provided through the historic land-grant system, is one method used to meet the needs of residents located in rural communities. Residents in a Central Utah county need Cooperative Extension programs to address the health and wellness of their rural community. According to the Utah…

Herd-Health Programs for Limited-Resource Farmers: Prevention versus Treatment

ERIC Educational Resources Information Center

Marshall, Renita W.

2011-01-01

In recognition of the changing influences on animal health, Extension professionals are charged with the responsibility of delivering educational programs to our limited resources farmers on the importance of herd health. Herd-health programs must be designed and implemented with the help of an Extension veterinarian to provide routine, planned…

Evaluating a New and Aspiring County Extension Director Leadership Education Program: Determining Outcomes and Needed Improvements

ERIC Educational Resources Information Center

Jayaratne, K. S. U.; Owen, Mitchel; Jones, David

2010-01-01

This leadership education evaluation study explored the leadership development outcomes of potential county extension directors and the ways to improve the program. The leadership education program aimed to improve participants' leadership abilities in understanding self, building relationships and managing resources. The analysis of quantitative…

Applying Coaching Strategies to Support Youth- and Family-Focused Extension Programming

ERIC Educational Resources Information Center

Olson, Jonathan R.; Hawkey, Kyle R.; Smith, Burgess; Perkins, Daniel F.; Borden, Lynne M.

2016-01-01

In this article, we describe how a peer-coaching model has been applied to support community-based Extension programming through the Children, Youth, and Families at Risk (CYFAR) initiative. We describe the general approaches to coaching that have been used to help with CYFAR program implementation, evaluation, and sustainability efforts; we…

University of Idaho's FCS Extension Educators Develop Leaders to Serve in Public Office

ERIC Educational Resources Information Center

Hoffman, Katie; Cummins, Melissa; Hansen, Lyle; Petty, Barbara; Tifft, Kathee; Laumatia, Laura

2013-01-01

In order to meet clientele needs and strengthen family and consumer sciences (FCS) programming, University of Idaho Extension educators expanded their roles through the Horizons program--a community leadership program, funded by the Northwest Area Foundation, aimed at reducing poverty in small rural and reservation communities. This study measured…

5 CFR 362.203 - Appointment and extensions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Section 362.203 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PRESIDENTIAL MANAGEMENT FELLOWS PROGRAM Program Administration § 362.203 Appointment and extensions. (a... requirements (general leadership, managerial, or specialized experience, academic credentials, professional...

Safeguarding the Health of the NASA Astronaut Community: the Need for Expanded Medical Monitoring for Former NASA Astronauts Under the Astronaut Occupational Health Program

NASA Technical Reports Server (NTRS)

Rossi, Meredith; Lee, Lesley; Wear, Mary; Van Baalen, Mary; Rhodes, Bradley

2016-01-01

The astronaut community is unique, and may be disproportionately exposed to occupational hazards not commonly seen in other communities. The extent to which the demands of the astronaut occupation and exposure to spaceflight-related hazards affect the health of the astronaut population over the life course is not completely known. Provision of health screening services to active and former astronauts ensures individual, mission, and community health and safety. Currently, the NASA Johnson Space Center (JSC) Flight Medicine Clinic (FMC) provides extensive medical monitoring to active astronauts throughout their careers. Upon retirement, astronauts may voluntarily return to the JSC FMC for an annual preventive exam. However, current retiree monitoring includes only selected screening tests, representing an opportunity for augmentation. The potential latent health effects of spaceflight demand an expanded framework of testing for former astronauts. The need is two-fold: screening tests widely recommended for other aging communities are necessary for astronauts to rule out conditions resulting from the natural aging process (e.g., colonoscopy, mammography), as opposed to conditions resulting directly from the astronaut occupation; and increased breadth of monitoring services will improve the understanding of occupational health risks and longitudinal health of the astronaut community, past, present, and future. To meet this need, NASA has begun an extensive exploration of the overall approach, cost, and policy implications of expanding existing medical monitoring under the Astronaut Occupational Health program for former NASA astronauts.

Effects of a Stretching Development and Maintenance Program on Hamstring Extensibility in Schoolchildren: A Cluster-Randomized Controlled Trial

PubMed Central

Mayorga-Vega, Daniel; Merino-Marban, Rafael; Manzano-Lagunas, Jorge; Blanco, Humberto; Viciana, Jesús

2016-01-01

The main purpose of the present study was to examine the effects of a physical education-based stretching development and maintenance program on hamstring extensibility in schoolchildren. A sample of 150 schoolchildren aged 7-10 years old from a primary school participated in the present study (140 participants were finally included). The six classes balanced by grade were cluster randomly assigned to the experimental group 1 (n = 51), experimental group 2 (n = 51) or control group (n = 49) (i.e., a cluster randomized controlled trial design was used). During the physical education classes, the students from the experimental groups 1 and 2 performed a four-minute stretching program twice a week for nine weeks (first semester). Then, after a five-week period of detraining coinciding with the Christmas holidays, the students from the experimental groups 1 and 2 completed another stretching program twice a week for eleven weeks (second semester). The students from the experimental group 1 continued performing the stretching program for four minutes while those from the experimental group 2 completed a flexibility maintenance program for only one minute. The results of the two-way analysis of variance showed that the physical education-based stretching development program significantly improved the students’ hamstring extensibility (p < 0.001), as well as that these gains obtained remained after the stretching maintenance program (p < 0.001). Additionally, statistically significant differences between the two experimental groups were not found (p > 0.05). After a short-term stretching development program, a physical education-based stretching maintenance program of only one-minute sessions twice a week is effective in maintaining hamstring extensibility among schoolchildren. This knowledge could help and guide teachers to design programs that allow a feasible and effective development and maintenance of students’ flexibility in the physical education setting. Key points A physical education-based stretching maintenance program of only one-minute sessions twice a week is effective in maintaining hamstring extensibility among schoolchildren. A four-minute maintenance program shows similar effects that the one-minute maintenance program on hamstring extensibility among schoolchildren. Physical education teachers and other practitioners could carry out one-minute programs for a feasible and effective maintenance of students’ flexibility. PMID:26957928

Computer interpretation of thallium SPECT studies based on neural network analysis

NASA Astrophysics Data System (ADS)

Wang, David C.; Karvelis, K. C.

1991-06-01

A class of artificial intelligence (Al) programs known as neural networks are well suited to pattern recognition. A neural network is trained rather than programmed to recognize patterns. This differs from "expert system" Al programs in that it is not following an extensive set of rules determined by the programmer, but rather bases its decision on a gestalt interpretation of the image. The "bullseye" images from cardiac stress thallium tests performed on 50 male patients, as well as several simulated images were used to train the network. The network was able to accurately classify all patients in the training set. The network was then tested against 50 unknown patients and was able to correctly categorize 77% of the areas of ischemia and 92% of the areas of infarction. While not yet matching the ability of a trained physician, the neural network shows great promise in this area and has potential application in other areas of medical imaging.

Liquid fluorine/hydrazine rhenium thruster update

NASA Technical Reports Server (NTRS)

Appel, M. A.; Kaplan, R. B.; Tuffias, R. H.

1983-01-01

The status of a fluorine/hydrazine thruster development program is discussed. A solid rhenium metal sea-level thrust chamber was successfully fabricated and tested for a total run duration of 1075 s with 17 starts. Rhenium fabrication methods are discussed. A test program was conducted to evaluate performance and chamber cooling. Acceptable performance was reached and cooling was adequate. A flight-type injector was fabricated that achieved an average extrapolated performance value of 3608 N-s/kg (368 lbf-s/lbm). Altitude thrust chambers were fabricated. One chamber incorporates a rhenium combustor and nozzle with an area ratio of 15:1, and a columbium nozzle extension with area ratios from 15:1 to 60:1. The other chamber was fabricated completely with a carbon/carbon composite. Because of the attributes of rhenium for use in high-temperature applications, a program to provide the materials and processes technology needed to reliably fabricate and/or repair vapor-deposited rhenium parts of relatively large size and complex shape is recommended.

Immediate Effects of Different Trunk Exercise Programs on Jump Performance.

PubMed

Imai, A; Kaneoka, K; Okubo, Y; Shiraki, H

2016-03-01

The aim of this study was to investigate the immediate effects of trunk stabilization exercise (SE) and conventional trunk exercise (CE) programs on jump performance. 13 adolescent male soccer players performed 2 kinds of jump testing before and immediate after 3 experimental conditions: SE, CE, and non-exercise (NE). The SE program consisted of the elbow-toe, hand-knee, and back bridge, and the CE program consisted of the sit-up, sit-up with trunk rotation and back extension. Testing of a countermovement jump (CMJ) and rebound jump (RJ) were performed to assess jump performance. Jump height of the CMJ and RJ-index, contact time, and jump height of the RJ were analyzed. The RJ index was improved significantly only after SE (p=0.017). However, contact time and jump height did not improve significantly in the SE condition. Moreover, no significant interaction or main effects of time or group were observed in the CMJ. Consequently, this study showed the different immediate effect on the RJ between the SE and CE, and suggested the possibility that the SE used in this study is useful as a warm-up program to improve the explosive movements. © Georg Thieme Verlag KG Stuttgart · New York.

B61 Mod 12 Life Extension Program Tailkit Assembly (B61 Mod 12 LEP TKA)

DTIC Science & Technology

2013-12-01

Selected Acquisition Report (SAR) RCS: DD-A&T(Q&A)823-468 B61 Mod 12 Life Extension Program Tailkit Assembly ( B61 Mod 12 LEP TKA...REPORT TYPE 3. DATES COVERED 00-00-2013 to 00-00-2013 4. TITLE AND SUBTITLE B61 Mod 12 Life Extension Program Tailkit Assembly ( B61 Mod 12 LEP...REPORT unclassified b. ABSTRACT unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 B61 Mod 12

The development and evaluation of a program for leg-strengthening exercises and balance assessment using Kinect.

PubMed

Choi, Jin-Seung; Kang, Dong-Won; Seo, Jeong-Woo; Kim, Dae-Hyeok; Yang, Seung-Tae; Tack, Gye-Rae

2016-01-01

[Purpose] In this study, a program was developed for leg-strengthening exercises and balance assessment using Microsoft Kinect. [Subjects and Methods] The program consists of three leg-strengthening exercises (knee flexion, hip flexion, and hip extension) and the one-leg standing test (OLST). The program recognizes the correct exercise posture by comparison with the range of motion of the hip and knee joints and provides a number of correct action examples to improve training. The program measures the duration of the OLST and presents this as the balance-age. The accuracy of the program was analyzed using the data of five male adults. [Results] In terms of the motion recognition accuracy, the sensitivity and specificity were 95.3% and 100%, respectively. For the balance assessment, the time measured using the existing method with a stopwatch had an absolute error of 0.37 sec. [Conclusion] The developed program can be used to enable users to conduct leg-strengthening exercises and balance assessments at home.

Evaluation Of Model Based Systems Engineering Processes For Integration Into Rapid Acquisition Programs

DTIC Science & Technology

2016-09-01

Failure MTBCF Mean Time Between Critical Failure MIRV Multiple Independently-targetable Reentry Vehicle MK6LE MK6 Guidance System Life Extension...programs were the MK54 Lightweight Torpedo program, a Raytheon Radar program, and the Life Extension of the MK6 Guidance System (MK6LE) of the...activities throughout the later life -cycle phases. MBSE allowed the programs to manage the evolution of simulation capabilities, as well as to assess the

An overview of the Defence Research Agency photovoltaic programme

NASA Technical Reports Server (NTRS)

Goodbody, C.; Davies, M. A. H.

1993-01-01

The Defense Research Agency (DRA) has been active in the photovoltaic field since the early 1960's, then as the Royal Aircraft Establishment (RAE). The early work was aimed at developing silicon cells, solar panels, and light-weight flexible arrays in support of the 'UK' and 'X' series of British scientific and technology satellites, for which the RAE was either the design authority or technical advisor. The X3 satellite - Prospero, launched in 1971 test flew 50 micron wrap-round silicon cells. The X4 satellite - Miranda, launched in 1974 test flew a deployable flexible silicon array which was developed at the DRA. During this period an extensive range of test equipment was developed which was maintained, modernized, and extended to date. Following a period of reduced activity in the late 1970's and early 1980's the current program evolved. The programs that have been undertaken since 1983 are briefly summarized. These range from various cell developments, new types of coverglasses, flight experiments, radiation testing, primary cell calibration, and environmental testing. The current photovoltaic program is mainly funded by the UK Ministry of Defence and by the Department of Trade and Industry through the British National Space Center (BNSC). The program is aimed at research and development, both internally and with industry, to meet the customer's technical objectives and requirements and to provide them with technical advice. The facilities are also being used on contract work for various national and international organizations.

Pain sensitivity and torque used during measurement predicts change in range of motion at the knee.

PubMed

Bishop, Mark D; George, Steven Z

2017-01-01

To determine the extent to which changes in knee range of motion (ROM) after a stretching program are related to sensory factors at the time of testing and the amount of force used during the measurement of ROM, rather than changes in soft-tissue properties. Randomized, single-blind design. Participants were randomly assigned to a control or stretching group. Research laboratory. Forty-four healthy volunteers (22.8±2.8 years of age; 23 men). The stretching group undertook static stretching twice a day for 8 weeks. The control group continued with routine activity, but was discouraged from starting a flexibility program. ROM and tissue extensibility was assessed using a Biodex3 dynamometer, and ratings of thermal pain were collected at baseline and at 4 and 8 weeks by an examiner blinded to group assignment. Multilevel modeling was used to examine predictors of ROM across time. The stretching group showed a 6% increase, and the control group had a 2% increase, in ROM over the 8-week program. However, when fixed and random effects were tested in a complete model, the group assignment was not significant. End-point torque during ROM testing ( p =0.021) and the ratings in response to thermal testing ( p <0.001) were significant, however. ROM measured in a testing session was not predicted by assignment to a stretching program. Rather, ROM was predicted by the ratings of thermal stimuli and the peak torque used to apply the stretch.

Propfan Test Assessment (PTA)

NASA Technical Reports Server (NTRS)

Little, B. H.; Poland, D. T.; Bartel, H. W.; Withers, C. C.; Brown, P. C.

1989-01-01

The objectives of the Propfan Test Assessment (PTA) Program were to validate in flight the structural integrity of large-scale propfan blades and to measure noise characteristics of the propfan in both near and far fields. All program objectives were met or exceeded, on schedule and under budget. A Gulfstream Aerospace Corporation GII aircraft was modified to provide a testbed for the 2.74m (9 ft) diameter Hamilton Standard SR-7 propfan which was driven by a 4475 kw (600 shp) turboshaft engine mounted on the left-hand wing of the aircraft. Flight research tests were performed for 20 combinations of speed and altitude within a flight envelope that extended to Mach numbers of 0.85 and altitudes of 12,192m (40,000 ft). Propfan blade stress, near-field noise on aircraft surfaces, and cabin noise were recorded. Primary variables were propfan power and tip speed, and the nacelle tilt angle. Extensive low altitude far-field noise tests were made to measure flyover and sideline noise and the lateral attenuation of noise. In coopertion with the FAA, tests were also made of flyover noise for the aircraft at 6100m (20,000 ft) and 10,668m (35,000 ft). A final series of tests were flown to evaluate an advanced cabin wall noise treatment that was produced under a separate program by NASA-Langley Research Center.

Two stage gear tooth dynamics program

NASA Technical Reports Server (NTRS)

Boyd, Linda S.

1989-01-01

The epicyclic gear dynamics program was expanded to add the option of evaluating the tooth pair dynamics for two epicyclic gear stages with peripheral components. This was a practical extension to the program as multiple gear stages are often used for speed reduction, space, weight, and/or auxiliary units. The option was developed for either stage to be a basic planetary, star, single external-external mesh, or single external-internal mesh. The two stage system allows for modeling of the peripherals with an input mass and shaft, an output mass and shaft, and a connecting shaft. Execution of the initial test case indicated an instability in the solution with the tooth paid loads growing to excessive magnitudes. A procedure to trace the instability is recommended as well as a method of reducing the program's computation time by reducing the number of boundary condition iterations.

Special report on the data collection programs for the ground based nitrogen washout experiment. Volume 1: User's guide

NASA Technical Reports Server (NTRS)

Bueker, P. A.

1982-01-01

The Nitrogen Washout System measures nitrogen elimination on a breath basis from the body tissues of a subject breathing pure oxygen. The system serves as a prototype for a Space Shuttle Life Sciences experiment and in the Environmental Physiology Laboratory. Typically, a subject washes out body nitrogen for three hours while breathing oxygen from a mask enclosed in a positive-pressure oxygen tent. A nitrogen washout requires one test operator and the test subject. A DEC LSI-11/02 computer is used to (1) control and calibrate the mass spectrometer and Skylab spirometer, (2) gather and store experimental data and (3) provide limited real time analysis and more extensive post-experiment analysis. Five programs are used to gather and store the experimental data and perform all the real time control and analysis.

Joint CDRH (Center for Devices and Radiological Health) and state quality-assurance surveys in nuclear medicine: Phase 2 - radiopharmaceuticals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamilton, D.R.; Evans, C.D.

The report discusses survey results on aspects of the quality assurance of radio-pharmaceuticals from 180 nuclear-medicine facilities in the United States. Data were collected from facilities in 8 states. Demographic information about nuclear-medicine operations and quality-assurance programs was gathered by state radiation-control-program personnel. The data collected from the survey show an incomplete acceptance of quality-assurance practices for radiopharmaceuticals. Most of the facilities in the survey indicated that, because an inferior radiopharmaceutical was prepared so infrequently, they did not believe it was cost-effective to perform extensive quality-assurance testing. The Center for Devices and Radiological Health hopes that the information from themore » survey will stimulate nuclear-medicine professionals and their organizations to encourage appropriate testing of all radiopharmaceuticals.« less

15 CFR 291.1 - Program description.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

15 CFR 291.1 - Program description.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

15 CFR 291.1 - Program description.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

15 CFR 291.1 - Program description.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

15 CFR 291.1 - Program description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS MANUFACTURING EXTENSION... amended, NIST will provide financial assistance to integrate environmentally-related services and resources into the national manufacturing extension system. This assistance will be provided by NIST often...

Development and validation of a high density SNP genotyping array for Atlantic salmon (Salmo salar).

PubMed

Houston, Ross D; Taggart, John B; Cézard, Timothé; Bekaert, Michaël; Lowe, Natalie R; Downing, Alison; Talbot, Richard; Bishop, Stephen C; Archibald, Alan L; Bron, James E; Penman, David J; Davassi, Alessandro; Brew, Fiona; Tinch, Alan E; Gharbi, Karim; Hamilton, Alastair

2014-02-06

Dense single nucleotide polymorphism (SNP) genotyping arrays provide extensive information on polymorphic variation across the genome of species of interest. Such information can be used in studies of the genetic architecture of quantitative traits and to improve the accuracy of selection in breeding programs. In Atlantic salmon (Salmo salar), these goals are currently hampered by the lack of a high-density SNP genotyping platform. Therefore, the aim of the study was to develop and test a dense Atlantic salmon SNP array. SNP discovery was performed using extensive deep sequencing of Reduced Representation (RR-Seq), Restriction site-Associated DNA (RAD-Seq) and mRNA (RNA-Seq) libraries derived from farmed and wild Atlantic salmon samples (n = 283) resulting in the discovery of > 400 K putative SNPs. An Affymetrix Axiom® myDesign Custom Array was created and tested on samples of animals of wild and farmed origin (n = 96) revealing a total of 132,033 polymorphic SNPs with high call rate, good cluster separation on the array and stable Mendelian inheritance in our sample. At least 38% of these SNPs are from transcribed genomic regions and therefore more likely to include functional variants. Linkage analysis utilising the lack of male recombination in salmonids allowed the mapping of 40,214 SNPs distributed across all 29 pairs of chromosomes, highlighting the extensive genome-wide coverage of the SNPs. An identity-by-state clustering analysis revealed that the array can clearly distinguish between fish of different origins, within and between farmed and wild populations. Finally, Y-chromosome-specific probes included on the array provide an accurate molecular genetic test for sex. This manuscript describes the first high-density SNP genotyping array for Atlantic salmon. This array will be publicly available and is likely to be used as a platform for high-resolution genetics research into traits of evolutionary and economic importance in salmonids and in aquaculture breeding programs via genomic selection.

Development and validation of a high density SNP genotyping array for Atlantic salmon (Salmo salar)

PubMed Central

2014-01-01

Background Dense single nucleotide polymorphism (SNP) genotyping arrays provide extensive information on polymorphic variation across the genome of species of interest. Such information can be used in studies of the genetic architecture of quantitative traits and to improve the accuracy of selection in breeding programs. In Atlantic salmon (Salmo salar), these goals are currently hampered by the lack of a high-density SNP genotyping platform. Therefore, the aim of the study was to develop and test a dense Atlantic salmon SNP array. Results SNP discovery was performed using extensive deep sequencing of Reduced Representation (RR-Seq), Restriction site-Associated DNA (RAD-Seq) and mRNA (RNA-Seq) libraries derived from farmed and wild Atlantic salmon samples (n = 283) resulting in the discovery of > 400 K putative SNPs. An Affymetrix Axiom® myDesign Custom Array was created and tested on samples of animals of wild and farmed origin (n = 96) revealing a total of 132,033 polymorphic SNPs with high call rate, good cluster separation on the array and stable Mendelian inheritance in our sample. At least 38% of these SNPs are from transcribed genomic regions and therefore more likely to include functional variants. Linkage analysis utilising the lack of male recombination in salmonids allowed the mapping of 40,214 SNPs distributed across all 29 pairs of chromosomes, highlighting the extensive genome-wide coverage of the SNPs. An identity-by-state clustering analysis revealed that the array can clearly distinguish between fish of different origins, within and between farmed and wild populations. Finally, Y-chromosome-specific probes included on the array provide an accurate molecular genetic test for sex. Conclusions This manuscript describes the first high-density SNP genotyping array for Atlantic salmon. This array will be publicly available and is likely to be used as a platform for high-resolution genetics research into traits of evolutionary and economic importance in salmonids and in aquaculture breeding programs via genomic selection. PMID:24524230

Progress towards extreme attitude testing with Magnetic Suspension and Balance Systems

NASA Technical Reports Server (NTRS)

Britcher, Colin P.; Parker, David H.

1988-01-01

Progress is reported in a research effort aimed towards demonstration of the feasibility of suspension and aerodynamic testing of models at high angles of attack in wind tunnel Magnetic Suspension and Balance Systems. Extensive modifications, described in this paper, have been made to the Southampton University suspension system in order to facilitate this work. They include revision of electromagnet configuration, installation of all-new position sensors and expansion of control system programs. An angle of attack range of 0 to 90 deg is expected for axisymmetric models. To date, suspension up to 80 deg angle of attack has been achieved.

Data-driven battery product development: Turn battery performance into a competitive advantage.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sholklapper, Tal

Poor battery performance is a primary source of user dissatisfaction across a broad range of applications, and is a key bottleneck hindering the growth of mobile technology, wearables, electric vehicles, and grid energy storage. Engineering battery systems is difficult, requiring extensive testing for vendor selection, BMS programming, and application-specific lifetime testing. This work also generates huge quantities of data. This presentation will explain how to leverage this data to help ship quality products faster using fewer resources while ensuring safety and reliability in the field, ultimately turning battery performance into a competitive advantage.

Development and evaluation of the impulse transfer function technique

NASA Technical Reports Server (NTRS)

Mantus, M.

1972-01-01

The development of the test/analysis technique known as the impulse transfer function (ITF) method is discussed. This technique, when implemented with proper data processing systems, should become a valuable supplement to conventional dynamic testing and analysis procedures that will be used in the space shuttle development program. The method can relieve many of the problems associated with extensive and costly testing of the shuttle for transient loading conditions. In addition, the time history information derived from impulse testing has the potential for being used to determine modal data for the structure under investigation. The technique could be very useful in determining the time-varying modal characteristics of structures subjected to thermal transients, where conventional mode surveys are difficult to perform.

Local Food Systems Course for Extension Educators in North Carolina: Summary of an Innovative Program

ERIC Educational Resources Information Center

Bloom, J. Dara; Lelekacs, Joanna Massey; Dunning, Rebecca; Piner, Abbey; Brinkmeyer, Emma

2017-01-01

Interest in local foods began in the early 2000s and has grown substantially over the past decade and a half. Although Extension is addressing local food systems in many states, training and materials in this program area are nascent. To address this circumstance, we developed a graduate course on local food systems for Extension educators.…

Cooperative Extension as a Framework for Health Extension: The Michigan State University Model

PubMed Central

Dwyer, Jeffrey W.; Contreras, Dawn; Tiret, Holly; Newkirk, Cathy; Carter, Erin; Cronk, Linda

2017-01-01

Problem The Affordable Care Act charged the Agency for Healthcare Research and Quality to create the Primary Care Extension Program, but did not fund this effort. The idea to work through health extension agents to support health care delivery systems was based on the nationally known Cooperative Extension System (CES). Instead of creating new infrastructure in health care, the CES is an ideal vehicle for increasing health-related research and primary care delivery. Approach The CES, a long-standing component of the land-grant university system, features a sustained infrastructure for providing education to communities. The Michigan State University (MSU) Model of Health Extension offers another means of developing a National Primary Care Extension Program that is replicable in part because of the presence of the CES throughout the United States. A partnership between the MSU College of Human Medicine and MSU Extension formed in 2014, emphasizing the promotion and support of human health research. The MSU Model of Health Extension includes the following strategies: building partnerships, preparing MSU Extension educators for participation in research, increasing primary care patient referrals and enrollment in health programs, and exploring innovative funding. Outcomes Since the formation of the MSU Model of Health Extension, researchers and extension professionals have made 200+ connections, and grants have afforded savings in salary costs. Next Steps The MSU College of Human Medicine and MSU Extension partnership can serve as a model to promote health partnerships nationwide between CES services within land-grant universities and academic health centers or community-based medical schools. PMID:28353501

SINGLE HEATER TEST FINAL REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.B. Cho

The Single Heater Test is the first of the in-situ thermal tests conducted by the U.S. Department of Energy as part of its program of characterizing Yucca Mountain in Nevada as the potential site for a proposed deep geologic repository for the disposal of spent nuclear fuel and high-level nuclear waste. The Site Characterization Plan (DOE 1988) contained an extensive plan of in-situ thermal tests aimed at understanding specific aspects of the response of the local rock-mass around the potential repository to the heat from the radioactive decay of the emplaced waste. With the refocusing of the Site Characterization Planmore » by the ''Civilian Radioactive Waste Management Program Plan'' (DOE 1994), a consolidated thermal testing program emerged by 1995 as documented in the reports ''In-Situ Thermal Testing Program Strategy'' (DOE 1995) and ''Updated In-Situ Thermal Testing Program Strategy'' (CRWMS M&O 1997a). The concept of the Single Heater Test took shape in the summer of 1995 and detailed planning and design of the test started with the beginning fiscal year 1996. The overall objective of the Single Heater Test was to gain an understanding of the coupled thermal, mechanical, hydrological, and chemical processes that are anticipated to occur in the local rock-mass in the potential repository as a result of heat from radioactive decay of the emplaced waste. This included making a priori predictions of the test results using existing models and subsequently refining or modifying the models, on the basis of comparative and interpretive analyses of the measurements and predictions. A second, no less important, objective was to try out, in a full-scale field setting, the various instruments and equipment to be employed in the future on a much larger, more complex, thermal test of longer duration, such as the Drift Scale Test. This ''shake down'' or trial aspect of the Single Heater Test applied not just to the hardware, but also to the teamwork and cooperation between multiple organizations performing their part in the test.« less

Demonstrating Impact through Replicable Analysis: Implications of an Evaluation of Arkansas's Expanded Food and Nutrition Education Program

ERIC Educational Resources Information Center

Phelps, Josh; Brite-Lane, Allison; Crook, Tina; Hakkak, Reza; Fuller, Serena

2017-01-01

The evaluation described in this article focused on the effectiveness of Arkansas's Extension-based Expanded Food and Nutrition Education Program (EFNEP) but demonstrates an analytic approach that may be useful across Extension programs. We analyzed data from 1,810 Arkansas EFNEP participants' entry and exit Behavior Checklists to assess…

Knowledge Transfer: A Case Study of a Community Nutrition Education Program at a Land-Grant University

ERIC Educational Resources Information Center

Hurtado, Ghaffar Ali

2014-01-01

The purpose of this study was to investigate the process of knowledge transfer. The setting is a health and nutrition educational program at University of Minnesota Extension. The main research question was how is Knowledge Transfer being implemented in Extension, specifically Educational Supplemental Nutrition Assistance Program? A case study,…

Using the Logic Model to Plan Extension and Outreach Program Development and Scholarship

ERIC Educational Resources Information Center

Corbin, Marilyn; Kiernan, Nancy Ellen; Koble, Margaret A.; Watson, Jack; Jackson, Daney

2004-01-01

In searching for a process to help program teams of campus-based faculty and field-based educators develop five-year and annual statewide program plans, cooperative extension administrators and specialists in Penn State's College of Agricultural Sciences discovered that the use of the logic model process can influence the successful design of…

Republic P-47G Thunderbolt Undergoes Ground Testing

NASA Image and Video Library

1945-06-21

A Republic P-47G Thunderbolt is tested with a large blower on the hangar apron at the National Advisory Committee for Aeronautics (NACA) Aircraft Engine Research Laboratory in Cleveland, Ohio. The blower could produce air velocities up to 250 miles per hour. This was strong enough to simulate take-off power and eliminated the need to risk flights with untried engines. The Republic P-47G was loaned to the laboratory to test NACA modifications to the Wright R-2800 engine’s cooling system at higher altitudes. The ground-based tests, seen here, were used to map the engine’s normal operating parameters. The P-47G then underwent an extensive flight test program to study temperature distribution among the engine’s 18 cylinders and develop methods to improve that distribution.

The use of real-time, hardware-in-the-loop simulation in the design and development of the new Hughes HS601 spacecraft attitude control system

NASA Technical Reports Server (NTRS)

Slafer, Loren I.

1989-01-01

Realtime simulation and hardware-in-the-loop testing is being used extensively in all phases of the design, development, and testing of the attitude control system (ACS) for the new Hughes HS601 satellite bus. Realtime, hardware-in-the-loop simulation, integrated with traditional analysis and pure simulation activities is shown to provide a highly efficient and productive overall development program. Implementation of high fidelity simulations of the satellite dynamics and control system algorithms, capable of real-time execution (using applied Dynamics International's System 100), provides a tool which is capable of being integrated with the critical flight microprocessor to create a mixed simulation test (MST). The MST creates a highly accurate, detailed simulated on-orbit test environment, capable of open and closed loop ACS testing, in which the ACS design can be validated. The MST is shown to provide a valuable extension of traditional test methods. A description of the MST configuration is presented, including the spacecraft dynamics simulation model, sensor and actuator emulators, and the test support system. Overall system performance parameters are presented. MST applications are discussed; supporting ACS design, developing on-orbit system performance predictions, flight software development and qualification testing (augmenting the traditional software-based testing), mission planning, and a cost-effective subsystem-level acceptance test. The MST is shown to provide an ideal tool in which the ACS designer can fly the spacecraft on the ground.

Manufacturing Techniques for Application of Erosion Resistant Coatings to Turbine Engine Compressor Components.

DTIC Science & Technology

means of increasing the life of aircraft gas turbine compressor rotor blades and stator vanes . Two proprietary erosion resistant coating systems... engine tests as the two most promising systems for doubling compressor airfoil lives. An Air Force Sponsored program to evaluate the applicability of...Helicopter engine erosion has become a severe problem in S. E. Asia because of extensive operations in sand and dust. Hard coatings offer a potential

Bone Analyzer

NASA Technical Reports Server (NTRS)

1985-01-01

The danger of disuse osteoporosis under weightless condition in space led to extensive research into measurements of bone stiffness and mass by the Biomedical Research Division of Ames and Stanford University. Through its Technology Utilization Program, NASA funded an advanced SOBSA, a microprocessor-controlled bone probe system. SOBSA determines bone stiffness by measuring responses to an electromagnetic shaker. With this information, a physician can identify bone disease, measure deterioration and prescribe necessary therapy. The system is now undergoing further testing.

The electromagnetic environment in CFC structures

NASA Technical Reports Server (NTRS)

Hardwick, C. J.; Haigh, S. J.

1991-01-01

Extensive measurements of induced voltages and currents were made using a CFC (carbon fiber composites) horizontal stabilizer from the A320 as a test bed. The work was done to investigate the efficacy of various protection schemes to reduce the magnitudes of the induced voltages and validate a computer program INDCAL. Results indicate that a good understanding of the various induced voltage mechanisms including the long wave effect due to current redistribution was obtained.

Atmosphere Explorer control system software (version 1.0)

NASA Technical Reports Server (NTRS)

Villasenor, A.

1972-01-01

The basic design is described of the Atmosphere Explorer Control System (AECS) software used in the testing, integration, and flight contol of the AE spacecraft and experiments. The software performs several vital functions, such as issuing commands to the spacecraft and experiments, receiving and processing telemetry data, and allowing for extensive data processing by experiment analysis programs. The major processing sections are: executive control section, telemetry decommutation section, command generation section, and utility section.

Public service communications

NASA Technical Reports Server (NTRS)

Whalen, A. A.

1979-01-01

The purpose of the paper is to construct, for detailed analysis, satellite and terrestrial communications delivery system models. Attention is given to the Public Service Communications Delivery System Architectural Study, that takes advantage of the extensive experience which exists among the public service experimenters. The Application Test Pilot is examined, which is a program designed to help awareness, in a practical sense, of the technology available and by the users innovative talents, adapts the technology to solve their problems.

Information Management for Installation Restoration with Focus on Aberdeen Proving Ground, Maryland

DTIC Science & Technology

1993-08-01

savings. Edgewood Area Project Background EA has been the site of extensive military munitions testing and disposal for over 70 years. Onsite burial of...titled "Installation Restoration Data Manage- ment Information System" (IRDMIS). This program, begun in 1975, has undergone several updates as technology ...collocated with AEC on EA, Maryland. Data from geotechnical chemical analysis and field survey results are supplied by AEC-authorized contractors and

The Soviet Military Leadership and the Question of Soviet Deployment Retreats

DTIC Science & Technology

1988-11-01

change, within Project AIR FORCE’s National Security Strategies Program. Earlier studies published in this project include: Jeremy R. Azrael, The...of a weapon system inherited from thi past for the sake of anticipated tradeoffs, notably in disruptive effecfs on the Western alliance. Anticipation...extensively test what the market will bear in negotiation with the West. - The second largest Soviet conventional force deployments are in Siberia and the

European consensus on a competency-based virtual reality training program for basic endoscopic surgical psychomotor skills.

PubMed

van Dongen, Koen W; Ahlberg, Gunnar; Bonavina, Luigi; Carter, Fiona J; Grantcharov, Teodor P; Hyltander, Anders; Schijven, Marlies P; Stefani, Alessandro; van der Zee, David C; Broeders, Ivo A M J

2011-01-01

Virtual reality (VR) simulators have been demonstrated to improve basic psychomotor skills in endoscopic surgery. The exercise configuration settings used for validation in studies published so far are default settings or are based on the personal choice of the tutors. The purpose of this study was to establish consensus on exercise configurations and on a validated training program for a virtual reality simulator, based on the experience of international experts to set criterion levels to construct a proficiency-based training program. A consensus meeting was held with eight European teams, all extensively experienced in using the VR simulator. Construct validity of the training program was tested by 20 experts and 60 novices. The data were analyzed by using the t test for equality of means. Consensus was achieved on training designs, exercise configuration, and examination. Almost all exercises (7/8) showed construct validity. In total, 50 of 94 parameters (53%) showed significant difference. A European, multicenter, validated, training program was constructed according to the general consensus of a large international team with extended experience in virtual reality simulation. Therefore, a proficiency-based training program can be offered to training centers that use this simulator for training in basic psychomotor skills in endoscopic surgery.

B61 Mod 12 Life Extension Program Tailkit Assembly (B61 Mod 12 LEP TKA)

DTIC Science & Technology

2015-12-01

Selected Acquisition Report ( SAR ) RCS: DD-A&T(Q&A)823-468 B61 Mod 12 Life Extension Program Tailkit Assembly (B61 Mod 12 LEP TKA) As of FY 2017... SAR March 23, 2016 10:38:20 UNCLASSIFIED 2 Table of Contents Common Acronyms and Abbreviations for MDAP Programs 3 Program Information...Unit Cost B61 Mod 12 LEP TKA December 2015 SAR March 23, 2016 10:38:20 UNCLASSIFIED 3 PB - President’s Budget PE - Program Element PEO - Program

Design and implementation of online automatic judging system

NASA Astrophysics Data System (ADS)

Liang, Haohui; Chen, Chaojie; Zhong, Xiuyu; Chen, Yuefeng

2017-06-01

For lower efficiency and poorer reliability in programming training and competition by currently artificial judgment, design an Online Automatic Judging (referred to as OAJ) System. The OAJ system including the sandbox judging side and Web side, realizes functions of automatically compiling and running the tested codes, and generating evaluation scores and corresponding reports. To prevent malicious codes from damaging system, the OAJ system utilizes sandbox, ensuring the safety of the system. The OAJ system uses thread pools to achieve parallel test, and adopt database optimization mechanism, such as horizontal split table, to improve the system performance and resources utilization rate. The test results show that the system has high performance, high reliability, high stability and excellent extensibility.

KSC-2009-3675

NASA Image and Video Library

2009-06-11

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly comprising the frustum, forward skirt extension and forward skirt , at left, moves toward the Vehicle Assembly Building, in the background. In the VAB's High Bay 4, the forward assembly will undergo processing and stacking to the upper stage. Ares I-X is the flight test for the Ares I which will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with Ares I, which is part of the Constellation Program to return men to the moon and beyond. Launch of the Ares I-X flight test is targeted for August 2009. Photo credit: NASA/Jack Pfaller

KSC-2009-3671

NASA Image and Video Library

2009-06-11

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly (comprising the frustum, forward skirt extension and forward skirt) moves out of the Assembly and Refurbishment Facility. It is being transferred to the Vehicle Assembly Building's High Bay 4 for processing and stacking to the upper stage. Ares I-X is the flight test for the Ares I which will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with Ares I, which is part of the Constellation Program to return men to the moon and beyond. Launch of the Ares I-X flight test is targeted for August 2009. Photo credit: NASA/Jack Pfaller

KSC-2009-3676

NASA Image and Video Library

2009-06-11

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly comprising the frustum, forward skirt extension and forward skirt heads for the Vehicle Assembly Building, in the background. In the VAB's High Bay 4, the forward assembly will undergo processing and stacking to the upper stage. Ares I-X is the flight test for the Ares I which will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with Ares I, which is part of the Constellation Program to return men to the moon and beyond. Launch of the Ares I-X flight test is targeted for August 2009. Photo credit: NASA/Jack Pfaller

KSC-2009-3677

NASA Image and Video Library

2009-06-11

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, the Ares I-X forward assembly comprising the frustum, forward skirt extension and forward skirt moves into the transfer aisle of the Vehicle Assembly Building. The assembly will be placed in the VAB's High Bay 4 where it will undergo processing and stacking to the upper stage. Ares I-X is the flight test for the Ares I which will provide NASA an early opportunity to test and prove hardware, facilities and ground operations associated with Ares I, which is part of the Constellation Program to return men to the moon and beyond. Launch of the Ares I-X flight test is targeted for August 2009. Photo credit: NASA/Jack Pfaller

The NASA pollution-reduction technology program for small jet aircraft engines

NASA Technical Reports Server (NTRS)

Fear, J. S.

1976-01-01

Three advanced combustor concepts, designed for the AiResearch TFE 731-2 turbofan engine, were evaluated in screening tests. Goals for carbon monoxide and unburned hydrocarbons were met or closely approached with two of the concepts with relatively modest departures from conventional combustor design practices. A more advanced premixing/prevaporizing combustor, while appearing to have the potential for meeting the oxides of nitrogen goal as well, will require extensive development to make it a practical combustion system. Smoke numbers for the two combustor concepts were well within the EPA smoke standard. Phase 2, Combustor-Engine Compatibility Testing, which is in its early stages, and planned Phase 3, Combustor-Engine Demonstration Testing, are also described.

Development and evaluation of a fault-tolerant multiprocessor (FTMP) computer. Volume 4: FTMP executive summary

NASA Technical Reports Server (NTRS)

Smith, T. B., III; Lala, J. H.

1984-01-01

The FTMP architecture is a high reliability computer concept modeled after a homogeneous multiprocessor architecture. Elements of the FTMP are operated in tight synchronism with one another and hardware fault-detection and fault-masking is provided which is transparent to the software. Operating system design and user software design is thus greatly simplified. Performance of the FTMP is also comparable to that of a simplex equivalent due to the efficiency of fault handling hardware. The FTMP project constructed an engineering module of the FTMP, programmed the machine and extensively tested the architecture through fault injection and other stress testing. This testing confirmed the soundness of the FTMP concepts.

Test Program for Stirling Radioisotope Generator Hardware at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Lewandowski, Edward J.; Bolotin, Gary S.; Oriti, Salvatore M.

2015-01-01

Stirling-based energy conversion technology has demonstrated the potential of high efficiency and low mass power systems for future space missions. This capability is beneficial, if not essential, to making certain deep space missions possible. Significant progress was made developing the Advanced Stirling Radioisotope Generator (ASRG), a 140-W radioisotope power system. A variety of flight-like hardware, including Stirling convertors, controllers, and housings, was designed and built under the ASRG flight development project. To support future Stirling-based power system development NASA has proposals that, if funded, will allow this hardware to go on test at the NASA Glenn Research Center. While future flight hardware may not be identical to the hardware developed under the ASRG flight development project, many components will likely be similar, and system architectures may have heritage to ASRG. Thus, the importance of testing the ASRG hardware to the development of future Stirling-based power systems cannot be understated. This proposed testing will include performance testing, extended operation to establish an extensive reliability database, and characterization testing to quantify subsystem and system performance and better understand system interfaces. This paper details this proposed test program for Stirling radioisotope generator hardware at NASA Glenn. It explains the rationale behind the proposed tests and how these tests will meet the stated objectives.

Test Program for Stirling Radioisotope Generator Hardware at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Lewandowski, Edward J.; Bolotin, Gary S.; Oriti, Salvatore M.

2014-01-01

Stirling-based energy conversion technology has demonstrated the potential of high efficiency and low mass power systems for future space missions. This capability is beneficial, if not essential, to making certain deep space missions possible. Significant progress was made developing the Advanced Stirling Radioisotope Generator (ASRG), a 140-watt radioisotope power system. A variety of flight-like hardware, including Stirling convertors, controllers, and housings, was designed and built under the ASRG flight development project. To support future Stirling-based power system development NASA has proposals that, if funded, will allow this hardware to go on test at the NASA Glenn Research Center (GRC). While future flight hardware may not be identical to the hardware developed under the ASRG flight development project, many components will likely be similar, and system architectures may have heritage to ASRG. Thus the importance of testing the ASRG hardware to the development of future Stirling-based power systems cannot be understated. This proposed testing will include performance testing, extended operation to establish an extensive reliability database, and characterization testing to quantify subsystem and system performance and better understand system interfaces. This paper details this proposed test program for Stirling radioisotope generator hardware at NASA GRC. It explains the rationale behind the proposed tests and how these tests will meet the stated objectives.

Advanced composite aileron for L-1011 transport aircraft: Design and analysis

NASA Technical Reports Server (NTRS)

Griffin, C. F.; Fogg, L. D.; Dunning, E. G.

1981-01-01

Detail design of the composite aileron has been completed. The aileron design is a multi-rib configuration with single piece upper and lower covers mechanically fastened to the substructure. Covers, front, spar and ribs are fabricated with graphite/epoxy tape or fabric composite material. The design has a weight savings of 23 percent compared to the aluminum aileron. The composite aileron has 50 percent fewer fasteners and parts than the metal aileron and is predicted to be cost competitive. Structural integrity of the composite aileron was verified by structural analysis and an extensive test program. Static, failsafe, and vibration analyses have been conducted on the composite aileron using finite element models and specialized computer programs for composite material laminates. The fundamental behavior of the composite materials used in the aileron was determined by coupon tests for a variety of environmental conditions. Critical details of the design were interrogated by static and fatigue tests on full-scale subcomponents and subassemblies of the aileron.

Winter navigation on the Great Lakes : a review of environmental studies

DOT National Transportation Integrated Search

1995-05-01

In 1970, Congress authorized a three-part Great Lakes-St.Lawrence Seaway Navigation Season Extension Program. It authorized a winter navigation demonstration program, a detailed survey study of season extension feasibility and a study of insurance ra...

Hand rehabilitation after stroke using a wearable, high DOF, spring powered exoskeleton.

PubMed

Tianyao Chen; Lum, Peter S

2016-08-01

Stroke patients often have inappropriate finger flexor activation and finger extensor weakness, which makes it difficult to open their affected hand for functional grasp. The goal was to develop a passive, lightweight, wearable device to enable improved hand function during performance of activities of daily living. The device, HandSOME II, assists with opening the patient's hand using 11 elastic actuators that apply extension torques to finger and thumb joints. Device design and initial testing are described. A novel mechanical design applies forces orthogonal to the finger segments despite the fact that all of the device DOFs are not aligned with human joint DOF. In initial testing with seven stroke subjects with impaired hand function, use of HandSOME II significantly increased maximum extension angles and range of motion in all of the index finger joints (P<;0.05). HandSOME II allows performance of all the grip patterns used in daily activities and can be used as part of home-based therapy programs.

An Arbitrary First Order Theory Can Be Represented by a Program: A Theorem

NASA Technical Reports Server (NTRS)

Hosheleva, Olga

1997-01-01

How can we represent knowledge inside a computer? For formalized knowledge, classical logic seems to be the most adequate tool. Classical logic is behind all formalisms of classical mathematics, and behind many formalisms used in Artificial Intelligence. There is only one serious problem with classical logic: due to the famous Godel's theorem, classical logic is algorithmically undecidable; as a result, when the knowledge is represented in the form of logical statements, it is very difficult to check whether, based on this statement, a given query is true or not. To make knowledge representations more algorithmic, a special field of logic programming was invented. An important portion of logic programming is algorithmically decidable. To cover knowledge that cannot be represented in this portion, several extensions of the decidable fragments have been proposed. In the spirit of logic programming, these extensions are usually introduced in such a way that even if a general algorithm is not available, good heuristic methods exist. It is important to check whether the already proposed extensions are sufficient, or further extensions is necessary. In the present paper, we show that one particular extension, namely, logic programming with classical negation, introduced by M. Gelfond and V. Lifschitz, can represent (in some reasonable sense) an arbitrary first order logical theory.

Steady, oscillatory, and unsteady subsonic Aerodynamics, production version 1.1 (SOUSSA-P1.1). Volume 2: User/programmer manual

NASA Technical Reports Server (NTRS)

Smolka, S. A.; Preuss, R. D.; Tseng, K.; Morino, L.

1980-01-01

A user/programmer manual for the computer program SOUSSA P 1.1 is presented. The program was designed to provide accurate and efficient evaluation of steady and unsteady loads on aircraft having arbitrary shapes and motions, including structural deformations. These design goals were in part achieved through the incorporation of the data handling capabilities of the SPAR finite element Structural Analysis computer program. As a further result, SOUSSA P possesses an extensive checkpoint/ restart facility. The programmer's portion of this manual includes overlay/subroutine hierarchy, logical flow of control, definition of SOUSSA P 1.1 FORTRAN variables, and definition of SOUSSA P 1.1 subroutines. Purpose of the SOUSSA P 1.1 modules, input data to the program, output of the program, hardware/software requirements, error detection and reporting capabilities, job control statements, a summary of the procedure for running the program and two test cases including input and output and listings are described in the user oriented portion of the manual.

Special Section: Extension in a Global Context.

ERIC Educational Resources Information Center

Rosson, C. Parr, III; And Others

1991-01-01

"International Programming Issues for Extension Education" (Rosson, Sanders) describes a survey of extension personnel identifying global competition and agriculture as a key issue. "Expanding Our Horizons Internationally" (Richardson, Woods) discusses North Carolina Extension's staff development on global issues. In…

77 FR 24992 - OSHA Strategic Partnership Program for Worker Safety and Health (OSPP); Extension of the Office...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-26

... Strategic Partnership Program for Worker Safety and Health (OSPP); Extension of the Office of Management and... specified in the OSHAs Strategic Partnership Program for Worker Safety and Health (OSPP). DATES: Comments... accepted during the Department of Labor's and Docket Office's normal business hours, 8:15 a.m. to 4:45 p.m...

Adapting Extension Food Safety Programming for Vegetable Growers to Accommodate Differences in Ethnicity, Farming Scale, and Other Individual Factors

ERIC Educational Resources Information Center

Kline, Terence R.; Kneen, Harold; Barrett, Eric; Kleinschmidt, Andy; Doohan, Doug

2012-01-01

Differences in vegetable production methods utilized by American growers create distinct challenges for Extension personnel providing food safety training to producer groups. A program employing computers and projectors will not be accepted by an Amish group that does not accept modern technology. We have developed an outreach program that covers…

Impact of "Grassroots on Work" (GROW) Extension Program to the Bachelor of Arts in Political Science Students' Sense of Civic Responsibility

ERIC Educational Resources Information Center

Paga, Mark Leo Huit

2015-01-01

Purpose: The purpose of this study was to determine the medium term effect of service-learning program or "Grassroots on Work" extension program to civic responsibility of AB Political Science students. Methodology: This study employed an impact evaluation research design and both qualitative and quantitative. The data on goals and…

Linking Roles of Education Assistants in the Missouri Small Farm Family Program at the University Resource Subsystem Client Social System Interface.

ERIC Educational Resources Information Center

Lionberger, Herbert F.; Wong, Tso Sang

Growing concern that the Cooperative Extension Service was failing to adequately reach small farmers with education materials through regular extension channels led to the implementation of Missouri's Small Farm Family Program. In this program, education assistants, many of whom are small farmers themselves, link the educational resources of the…