Storing information in-the-world: Metacognition and cognitive offloading in a short-term memory task.

PubMed

Risko, Evan F; Dunn, Timothy L

2015-11-01

We often store to-be-remembered information externally (e.g., written down on a piece of paper) rather than internally. In the present investigation, we examine factors that influence the decision to store information in-the-world versus in-the-head using a variant of a traditional short term memory task. In Experiments 1a and 1b participants were presented with to-be-remembered items and either had to rely solely on internal memory or had the option to write down the presented information. In Experiments 2a and 2b participants were presented with the same stimuli but made metacognitive judgments about their predicted performance and effort expenditure. The spontaneous use of external storage was related both to the number of items to be remembered and an individual's actual and perceived short-term-memory capacity. Interestingly, individuals often used external storage despite its use affording no observable benefit. Implications for understanding how individuals integrate external resources in pursuing cognitive goals are discussed. Copyright © 2015 Elsevier Inc. All rights reserved.

Coupled dynamic systems and Le Chatelier's principle in noise control

NASA Astrophysics Data System (ADS)

Maidanik, G.; Becker, K. J.

2004-05-01

Investigation of coupling an externally driven dynamic system-a master dynamic system-to a passive one-an adjunct dynamic system-reveals that the response of the adjunct dynamic system affects the precoupled response of the master dynamic system. The responses, in the two dynamic systems when coupled, are estimated by the stored energies (Es) and (E0), respectively. Since the adjunct dynamic system, prior to coupling, was with zero (0) stored energy, E0s=0, the precoupled stored energy (E00) in the master dynamic system is expected to be reduced to (E0) when coupling is instituted; i.e., one expects E0

Process Evaluation of Baltimore Healthy Stores: A Pilot Health Intervention Program With Supermarkets and Corner Stores in Baltimore City

PubMed Central

Gittelsohn, Joel; Suratkar, Sonali; Song, Hee-Jung; Sacher, Suzanne; Rajan, Radha; Rasooly, Irit R.; Bednarek, Erin; Sharma, Sangita; Anliker, Jean A.

2011-01-01

Reduced access to affordable healthy foods is linked to higher rates of chronic diseases in low-income urban settings. The authors conduct a feasibility study of an environmental intervention (Baltimore Healthy Stores) in seven corner stores owned by Korean Americans and two supermarkets in low-income East Baltimore. The goal is to increase the availability of healthy food options and to promote them at the point of purchase. The process evaluation is conducted largely by external evaluators. Participating stores stock promoted foods, and print materials are displayed with moderate to high fidelity. Interactive consumer taste tests are implemented with high reach and dose. Materials developed specifically for Korean American corner store owners are implemented with moderate to high fidelity and dose. Results indicate that small food store–based intervention programs are feasible to implement and are a viable means of increasing healthy food availability and a good location for point-of-purchase promotions in low-income urban settings. PMID:19144859

Using a Virtual Store As a Research Tool to Investigate Consumer In-store Behavior.

PubMed

Ploydanai, Kunalai; van den Puttelaar, Jos; van Herpen, Erica; van Trijp, Hans

2017-07-24

People's responses to products and/or choice environments are crucial to understanding in-store consumer behaviors. Currently, there are various approaches (e.g., surveys or laboratory settings) to study in-store behaviors, but the external validity of these is limited by their poor capability to resemble realistic choice environments. In addition, building a real store to meet experimental conditions while controlling for undesirable effects is costly and highly difficult. A virtual store developed by virtual reality techniques potentially transcends these limitations by offering the simulation of a 3D virtual store environment in a realistic, flexible, and cost-efficient way. In particular, a virtual store interactively allows consumers (participants) to experience and interact with objects in a tightly controlled yet realistic setting. This paper presents the key elements of using a desktop virtual store to study in-store consumer behavior. Descriptions of the protocol steps to: 1) build the experimental store, 2) prepare the data management program, 3) run the virtual store experiment, and 4) organize and export data from the data management program are presented. The virtual store enables participants to navigate through the store, choose a product from alternatives, and select or return products. Moreover, consumer-related shopping behaviors (e.g., shopping time, walking speed, and number and type of products examined and bought) can also be collected. The protocol is illustrated with an example of a store layout experiment showing that shelf length and shelf orientation influence shopping- and movement-related behaviors. This demonstrates that the use of a virtual store facilitates the study of consumer responses. The virtual store can be especially helpful when examining factors that are costly or difficult to change in real life (e.g., overall store layout), products that are not presently available in the market, and routinized behaviors in familiar environments.

Calcium sources used by post-natal human myoblasts during initial differentiation.

PubMed

Arnaudeau, Serge; Holzer, Nicolas; König, Stéphane; Bader, Charles R; Bernheim, Laurent

2006-08-01

Increases in cytoplasmic Ca(2+) are crucial for inducing the initial steps of myoblast differentiation that ultimately lead to fusion; yet the mechanisms that produce this elevated Ca(2+) have not been fully resolved. For example, it is still unclear whether the increase comes exclusively from membrane Ca(2+) influx or also from Ca(2+) release from internal stores. To address this, we investigated early differentiation of myoblast clones each derived from single post-natal human satellite cells. Initial differentiation was assayed by immunostaining myonuclei for the transcription factor MEF2. When Ca(2+) influx was eliminated by using low external Ca(2+) media, we found that approximately half the clones could still differentiate. Of the clones that required influx of external Ca(2+), most clones used T-type Ca(2+) channels, but others used store-operated channels as influx-generating mechanisms. On the other hand, clones that differentiated in low external Ca(2+) relied on Ca(2+) release from internal stores through IP(3) receptors. Interestingly, by following clones over time, we observed that some switched their preferred Ca(2+) source: clones that initially used calcium release from internal stores to differentiate later required Ca(2+) influx and inversely. In conclusion, we show that human myoblasts can use three alternative mechanisms to increase cytoplasmic Ca(2+) at the onset of the differentiation process: influx through T-types Ca(2+) channels, influx through store operated channels and release from internal stores through IP(3) receptors. In addition, we suggest that, probably because Ca(2+) elevation is essential during initial differentiation, myoblasts may be able to select between these alternate Ca(2+) pathways.

Optimal installation locations for automated external defibrillators in Taipei 7-Eleven stores: using GIS and a genetic algorithm with a new stirring operator.

PubMed

Huang, Chung-Yuan; Wen, Tzai-Hung

2014-01-01

Immediate treatment with an automated external defibrillator (AED) increases out-of-hospital cardiac arrest (OHCA) patient survival potential. While considerable attention has been given to determining optimal public AED locations, spatial and temporal factors such as time of day and distance from emergency medical services (EMSs) are understudied. Here we describe a geocomputational genetic algorithm with a new stirring operator (GANSO) that considers spatial and temporal cardiac arrest occurrence factors when assessing the feasibility of using Taipei 7-Eleven stores as installation locations for AEDs. Our model is based on two AED conveyance modes, walking/running and driving, involving service distances of 100 and 300 meters, respectively. Our results suggest different AED allocation strategies involving convenience stores in urban settings. In commercial areas, such installations can compensate for temporal gaps in EMS locations when responding to nighttime OHCA incidents. In residential areas, store installations can compensate for long distances from fire stations, where AEDs are currently held in Taipei.

Iron Status in Toddlerhood Predicts Sensitivity to Psychostimulants in Children

ERIC Educational Resources Information Center

Turner, Catharyn A.; Xie, Diqiong; Zimmerman, Bridget M.; Calarge, Chadi A.

2012-01-01

Objective: Iron deficiency is associated with impaired dopaminergic signaling and externalizing behavior. The authors examine, whether iron stores in toddlerhood influence later response to psychostimulants. Method: Youth participating in a study monitoring the long-term safety of risperidone were included in this analysis if they had received…

Internalism, Active Externalism, and Nonconceptual Content: The Ins and Outs of Cognition

ERIC Educational Resources Information Center

Dartnall, Terry

2007-01-01

Active externalism (also known as the extended mind hypothesis) says that we use objects and situations in the world as external memory stores that we consult as needs dictate. This gives us economies of storage: We do not need to remember that Bill has blue eyes and wavy hair if we can acquire this information by looking at Bill. I argue for a…

On-farm storage of livestock vaccines may be a risk to vaccine efficacy: a study of the performance of on-farm refrigerators to maintain the correct storage temperature.

PubMed

Williams, Paul D; Paixão, Gustavo

2018-04-19

Livestock vaccines (LV) are often stored on-farm, in a refrigerator (fridge), prior to use and little is documented about the storage conditions during this period. As the quality of a vaccine can be impaired by storage at an incorrect temperature, the present study aimed to evaluate the on-farm performance of farm fridges to maintain the correct storage temperature. From January to August 2014, temperature data loggers were placed on selected farms fridges used to store LV (n = 20) in South-West England. Temperature recording data was available from 17 of the 20 farms. Fifty-nine percent of farm fridges had at least one temperature recording above 8 °C, 53% had at least one recording below 2 °C and 41% at or below 0 °C. Internal fridge temperatures attained 24 °C and dropped to - 12 °C as an absolute maximum and minimum respectively. Fridges tested spent an average of 16% of the total time recorded above 8 °C. Time of the year significantly influenced the percentage of time above 8 °C. External and internal temperatures were found to be positively correlated (p < 0.001). Statistical significant differences in internal and external temperatures were found between March and August. The majority of fridges in this study would have failed to keep any stored LV within the recommended storage temperature range. If LV are going to be stored on-farm prior to use, then urgent improvements in this part of the cold-chain are required in order to insure vaccine efficacy is not compromised.

Open, Cross Platform Chemistry Application Unifying Structure Manipulation, External Tools, Databases and Visualization

DTIC Science & Technology

2012-11-27

with powerful analysis tools and an informatics approach leveraging best-of-breed NoSQL databases, in order to store, search and retrieve relevant...dictionaries, and JavaScript also has good support. The MongoDB project[15] was chosen as a scalable NoSQL data store for the cheminfor- matics components

Optimal Installation Locations for Automated External Defibrillators in Taipei 7-Eleven Stores: Using GIS and a Genetic Algorithm with a New Stirring Operator

PubMed Central

Wen, Tzai-Hung

2014-01-01

Immediate treatment with an automated external defibrillator (AED) increases out-of-hospital cardiac arrest (OHCA) patient survival potential. While considerable attention has been given to determining optimal public AED locations, spatial and temporal factors such as time of day and distance from emergency medical services (EMSs) are understudied. Here we describe a geocomputational genetic algorithm with a new stirring operator (GANSO) that considers spatial and temporal cardiac arrest occurrence factors when assessing the feasibility of using Taipei 7-Eleven stores as installation locations for AEDs. Our model is based on two AED conveyance modes, walking/running and driving, involving service distances of 100 and 300 meters, respectively. Our results suggest different AED allocation strategies involving convenience stores in urban settings. In commercial areas, such installations can compensate for temporal gaps in EMS locations when responding to nighttime OHCA incidents. In residential areas, store installations can compensate for long distances from fire stations, where AEDs are currently held in Taipei. PMID:25045396

An expert system shell for inferring vegetation characteristics: Changes to the historical cover type database (Task F)

NASA Technical Reports Server (NTRS)

1993-01-01

All the options in the NASA VEGetation Workbench (VEG) make use of a database of historical cover types. This database contains results from experiments by scientists on a wide variety of different cover types. The learning system uses the database to provide positive and negative training examples of classes that enable it to learn distinguishing features between classes of vegetation. All the other VEG options use the database to estimate the error bounds involved in the results obtained when various analysis techniques are applied to the sample of cover type data that is being studied. In the previous version of VEG, the historical cover type database was stored as part of the VEG knowledge base. This database was removed from the knowledge base. It is now stored as a series of flat files that are external to VEG. An interface between VEG and these files was provided. The interface allows the user to select which files of historical data to use. The files are then read, and the data are stored in Knowledge Engineering Environment (KEE) units using the same organization of units as in the previous version of VEG. The interface also allows the user to delete some or all of the historical database units from VEG and load new historical data from a file. This report summarizes the use of the historical cover type database in VEG. It then describes the new interface to the files containing the historical data. It describes minor changes that were made to VEG to enable the externally stored database to be used. Test runs to test the operation of the new interface and also to test the operation of VEG using historical data loaded from external files are described. Task F was completed. A Sun cartridge tape containing the KEE and Common Lisp code for the new interface and the modified version of the VEG knowledge base was delivered to the NASA GSFC technical representative.

Frequency and amplitude stabilization in MEMS and NEMS oscillators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Changyao; Lopez, Omar Daniel; Czaplewski, David A.

This invention comprises a nonlinear micro- and nano-mechanical resonator that can maintain frequency of operation and amplitude of operation for a period of time after all external power has been removed from the device. Utilizing specific nonlinear dynamics of the micromechanical resonator, mechanical energy at low frequencies can be input and stored in higher frequencies modes, thus using the multiple degrees of freedom of the resonator to extend its energy storage capacity. Furthermore, the energy stored in multiple vibrational modes can be used to maintain the resonator oscillating for a fixed period of time, even without an external power supply.more » This is the first demonstration of an "autonomous" frequency source that can maintain a constant frequency and vibrating amplitude when no external power is provided, making it ideal for applications requiring an oscillator in low power, or limited and intermittent power supplies.« less

A single cell observation of staurosporine effect on the Ca2+ signals in rat basophilic leukemia cells.

PubMed

Teshima, R; Ikebuchi, H; Terao, T; Miyagawa, T; Arata, Y; Nakanishi, M

1990-09-17

A digital imaging fluorescence microscope was used to study the effect of a protein kinase inhibitor staurosporine on the antigen-dependent calcium signals in an individual rat basophilic leukemia cell (RBL-2H3). Although dose dependency of staurosporine was different from one cell to another, staurosporine inhibited, at low concentration, the calcium influx from the external medium into RBL-2H3 cells. At high concentration, however, it inhibited both the removal of calcium ion from internal stores and the calcium influx from the external medium. These results indicated that staurosporine is necessary for the inhibition of the calcium influx from the external medium and that a protein kinase (possibly protein kinase C) is involved in the calcium influx from the external medium into the cytoplasm.

Aeroelastic passive control optimization of supersonic composite wing with external stores

NASA Astrophysics Data System (ADS)

Sulaeman, E.; Abdullah, N. A.; Kashif, S. M.

2017-03-01

This paper provides a study on passive aeroelastic control optimization, by means of aeroelastic tailoring, of a composite supersonic wing equipped with external stores. The objective of the optimization is to minimize wing weight by considering the aeroelastic flutter and divergence instability speeds as constraints at several flight altitudes. The optimization variables are the composite ply angle and skin thickness of the wing box, wing rib and its control surfaces. The aeroelastic instability speed is set as constraint such that it should be higher than the flutter speed of a metallic base line model of supersonic wing having previously published. A finite element analysis is applied to determine the stiffness and mass matric of the wing and its multi stores. The boundary element method in the form of doublet lattice method is used to model the unsteady aerodynamic load. The results indicate that, for the present wing configuration, the high modulus Graphite/Epoxy composite provides a desired higher flutter speed and lower wing weight compare to that of Kevlar/Epoxy composite as well as the base line metallic wing materials. The aeroelastic boundary thus can be enlarged to higher speed zone and in the same time reduce the structural weight which is important for a further optimization process.

On the Roles of External Knowledge Representations in Assessment Design

ERIC Educational Resources Information Center

Mislevy, Robert J.; Behrens, John T.; Bennett, Randy E.; Demark, Sarah F.; Frezzo, Dennis C.; Levy, Roy; Robinson, Daniel H.; Rutstein, Daisy Wise; Shute, Valerie J.; Stanley, Ken; Winters, Fielding I.

2010-01-01

People use external knowledge representations (KRs) to identify, depict, transform, store, share, and archive information. Learning how to work with KRs is central to be-coming proficient in virtually every discipline. As such, KRs play central roles in curriculum, instruction, and assessment. We describe five key roles of KRs in assessment: (1)…

On the Roles of External Knowledge Representations in Assessment Design. CSE Report 722

ERIC Educational Resources Information Center

Mislevy, Robert J.; Behrens, John T.; Bennett, Randy E.; Demark, Sarah F.; Frezzo, Dennis C.; Levy, Roy; Robinson, Daniel H.; Rutstein, Daisy Wise; Shute, Valerie J.; Stanley, Ken; Winters, Fielding I.

2007-01-01

People use external knowledge representations (EKRs) to identify, depict, transform, store, share, and archive information. Learning how to work with EKRs is central to becoming proficient in virtually every discipline. As such, EKRs play central roles in curriculum, instruction, and assessment. Five key roles of EKRs in educational assessment are…

Aerodynamic Loads on an External Store Adjacent to a 45 Degree Sweptback Wing at Mach Numbers from 0.70 to 1.96, Including an Evaluation of Techniques Used

NASA Technical Reports Server (NTRS)

Guy, Lawrence D; Hadaway, William M

1955-01-01

Aerodynamic forces and moments have been obtained in the Langley 9- by 12-inch blowdown tunnel on an external store and on a 45 degree swept-back wing-body combination measured separately at Mach numbers from 0.70 to 1.96. The wing was cantilevered and had an aspect ratio of 4.0; the store was independently sting-mounted and had a Douglas Aircraft Co. (DAC) store shape. The angle of attack range was from -3 degrees to 12 degrees and the Reynolds number (based on wing mean aerodynamic chord) varied from 1.2 x10(6) to 1.7 x 10(6). Wing-body transonic forces and moments have been compared with data of a geometrically similar full-scale model tested in the Langley 16-foot and 8-foot transonic tunnels in order to aid in the evaluation of transonic-tunnel interference. The principal effect of the store, for the position tested, was that of delaying the wing-fuselage pitch-up tendency to higher angles of attack at Mach numbers from 0.70 to 0.90 in a manner similar to that of a wing chord extension. The most critical loading condition on the store was that due to side force, not only because the loads were of large magnitude but also because they were in the direction of least structural strength of the supporting pylon. These side loads were greatest at high angles of attack in the supersonic speed range. Removal of the supporting pylon (or increasing the gap between the store and wing) reduced the values of the variation of side-force coefficientwith angle of attack by about 50 percent at all test Mach numbers, indicating that important reductions in store side force may be realized by proper design or location of the necessary supporting pylon. A change of the store skew angle (nose inboard) was found to relieve the excessive store side loads throughout the Mach number range. It was also determined that the relative position of the fuselage nose to the store can appreciably affect the store side forces at supersonic speeds.

Driven to drink: Sin taxes near a border.

PubMed

Beatty, Timothy K M; Larsen, Erling Røed; Sommervoll, Dag Einar

2009-12-01

This paper investigates household purchasing behavior in response to differing alcohol and tobacco taxes near an international border. Our study suggests that large tax differentials near borders induce economically important tax avoidance behavior, which may limit a government's ability to raise revenue and potentially undermine important health and social policy goals. We match novel supermarket scanner and consumer expenditure data to measure the size and scope of the effect for households and stores. We find that stores near/far from the international border have statistically significantly lower/higher sales of beer and tobacco than comparable stores far/near the border. Moreover, we find that households near the border report higher consumption of these same goods. This is consistent with households facing lower prices. Finally, we find measures of externalities associated with these goods are higher near the border.

Survey of Mexican retail stores for US beef product.

PubMed

Huerta-Leidenz, Nelson; Ruíz-Flores, Agustín; Maldonado-Siman, Ema; Valdéz, Alejandra; Belk, Keith E

2014-02-01

Retail packages (N=1004) containing fresh US beef in display cases in five cities across three regions of Mexico were surveyed for cut types, cutting styles, fat thickness measurements, marbling scores, and USDA Quality Grades to gain an overview of fresh US beef in Mexican retail markets. Data were analyzed to generate frequency distributions and examine the effect of city, geographical region, store chain, and socio-economic status of the targeted clientele on type, cutting style, fat measures and quality of beef cuts of US origin. Top round, bottom round and knuckle were the most common cut types. Milanesa-type slice and "bistec" (steak for grilling) were the predominant cutting styles. Over 95% of the retail cuts were trimmed to 3.2mm or less of external fat. Most cuts were USDA Select (74.5%) and USDA Choice (24.5%). External fat thickness and marbling score differed among cities and store chains (P<0.01). © 2013. Published by Elsevier Ltd. All rights reserved.

Subpopulation of store-operated Ca2+ channels regulate Ca2+-induced Ca2+ release in non-excitable cells.

PubMed

Yao, Jian; Li, Qin; Chen, Jin; Muallem, Shmuel

2004-05-14

Ca2+-induced Ca2+ release (CICR) is a well characterized activity in skeletal and cardiac muscles mediated by the ryanodine receptors. The present study demonstrates CICR in the non-excitable parotid acinar cells, which resembles the mechanism described in cardiac myocytes. Partial depletion of internal Ca2+ stores leads to a minimal activation of Ca2+ influx. Ca2+ influx through this pathway results in an explosive mobilization of Ca2+ from the majority of the stores by CICR. Thus, stimulation of parotid acinar cells in Ca2+ -free medium with 0.5 microm carbachol releases approximately 5% of the Ca2+ mobilizable by 1 mm carbachol. Addition of external Ca2+ induced the same Ca2+ release observed in maximally stimulated cells. Similar results were obtained by a short treatment with 2.5-10 microm cyclopiazonic acid, an inhibitor of the sarco/endoplasmic reticulum Ca2+ ATPase pump. The Ca2+ release induced by the addition of external Ca2+ was largely independent of IP(3)Rs because it was reduced by only approximately 30% by the inhibition of the inositol 1,4,5-trisphosphate receptors with caffeine or heparin. Measurements of Ca2+ -activated outward current and [Ca2+](i) suggested that most CICR triggered by Ca2+ influx occurred away from the plasma membrane. Measurement of the response to several concentrations of cyclopiazonic acid revealed that Ca2+ influx that regulates CICR is associated with a selective portion of the internal Ca2+ pool. The minimal activation of Ca2+ influx by partial store depletion was confirmed by the measurement of Mn2+ influx. Inhibition of Ca2+ influx with SKF96365 or 2-aminoethoxydiphenyl borate prevented activation of CICR observed on addition of external Ca2+. These findings provide evidence for activation of CICR by Ca2+ influx in non-excitable cells, demonstrate a previously unrecognized role for Ca2+ influx in triggering CICR, and indicate that CICR in non-excitable cells resembles CICR in cardiac myocytes with the exception that in cardiac cells Ca2+ influx is mediated by voltage-regulated Ca2+ channels whereas in non-excitable cells Ca2+ influx is mediated by store-operated channels.

User's Manual for the Naval Interactive Data Analysis System-Climatologies (NIDAS-C), Version 2.0

NASA Technical Reports Server (NTRS)

Abbott, Clifton

1996-01-01

This technical note provides the user's manual for the NIDAS-C system developed for the naval oceanographic office. NIDAS-C operates using numerous oceanographic data categories stored in an installed version of the Naval Environmental Operational Nowcast System (NEONS), a relational database management system (rdbms) which employs the ORACLE proprietary rdbms engine. Data management, configuration, and control functions for the supporting rdbms are performed externally. NIDAS-C stores and retrieves data to/from the rdbms but exercises no direct internal control over the rdbms or its configuration. Data is also ingested into the rdbms, for use by NIDAS-C, by external data acquisition processes. The data categories employed by NIDAS-C are as follows: Bathymetry - ocean depth at

Non Invasive Sensors for Monitoring the Efficiency of AC Electrical Rotating Machines

PubMed Central

Zidat, Farid; Lecointe, Jean-Philippe; Morganti, Fabrice; Brudny, Jean-François; Jacq, Thierry; Streiff, Frédéric

2010-01-01

This paper presents a non invasive method for estimating the energy efficiency of induction motors used in industrial applications. This method is innovative because it is only based on the measurement of the external field emitted by the motor. The paper describes the sensors used, how they should be placed around the machine in order to decouple the external field components generated by both the air gap flux and the winding end-windings. The study emphasizes the influence of the eddy currents flowing in the yoke frame on the sensor position. A method to estimate the torque from the external field use is proposed. The measurements are transmitted by a wireless module (Zig-Bee) and they are centralized and stored on a PC computer. PMID:22163631

Non invasive sensors for monitoring the efficiency of AC electrical rotating machines.

PubMed

Zidat, Farid; Lecointe, Jean-Philippe; Morganti, Fabrice; Brudny, Jean-François; Jacq, Thierry; Streiff, Frédéric

2010-01-01

This paper presents a non invasive method for estimating the energy efficiency of induction motors used in industrial applications. This method is innovative because it is only based on the measurement of the external field emitted by the motor. The paper describes the sensors used, how they should be placed around the machine in order to decouple the external field components generated by both the air gap flux and the winding end-windings. The study emphasizes the influence of the eddy currents flowing in the yoke frame on the sensor position. A method to estimate the torque from the external field use is proposed. The measurements are transmitted by a wireless module (Zig-Bee) and they are centralized and stored on a PC computer.

A Simple Technique for Securing Data at Rest Stored in a Computing Cloud

NASA Astrophysics Data System (ADS)

Sedayao, Jeff; Su, Steven; Ma, Xiaohao; Jiang, Minghao; Miao, Kai

"Cloud Computing" offers many potential benefits, including cost savings, the ability to deploy applications and services quickly, and the ease of scaling those application and services once they are deployed. A key barrier for enterprise adoption is the confidentiality of data stored on Cloud Computing Infrastructure. Our simple technique implemented with Open Source software solves this problem by using public key encryption to render stored data at rest unreadable by unauthorized personnel, including system administrators of the cloud computing service on which the data is stored. We validate our approach on a network measurement system implemented on PlanetLab. We then use it on a service where confidentiality is critical - a scanning application that validates external firewall implementations.

Analyzing Science Teaching: A Case Study Based on Three Philosophical Models of Teaching. The Explanatory Modes Project, Background Paper No. 5.

ERIC Educational Resources Information Center

Munby, A. Hugh

The development of a category scheme for the systematic analysis of science classroom discourse is described. Three teaching models are discussed: the Impression Model, which depicts the mind of a student as receiving and storing external impressions; the Insight Model, which denies the possibility that ideas or knowledge can be conveyed by…

Thermal Analysis of the Vulnerability of the Spacesuit Battery Design to Short-Circuit Conditions (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, G. H.; Chaney, L.; Smith, K.

2010-04-22

NREL researchers created a mathematical model of a full 16p-5s spacesuit battery for NASA that captures electrical/thermal behavior during shorts to assess the vulnerability of the battery to pack-internal (cell-external) shorts. They found that relocating the short from battery pack-external (experimental validation) to pack-internal (modeling study) causes substantial additional heating of cells, which can lead to cell thermal runaway. All three layers of the bank-to-bank separator must fail for the pack-internal short scenario to occur. This finding emphasizes the imperative of battery pack assembly cleanliness. The design is tolerant to pack-internal shorts when stored at 0% state of charge.

pH modulation ameliorates the red blood cell storage lesion in a murine model of transfusion.

PubMed

Chang, Alex L; Kim, Young; Seitz, Aaron P; Schuster, Rebecca M; Pritts, Timothy A

2017-05-15

Prolonged storage of packed red blood cells (pRBCs) induces a series of harmful biochemical and metabolic changes known as the RBC storage lesion. RBCs are currently stored in an acidic storage solution, but the effect of pH on the RBC storage lesion is unknown. We investigated the effect of modulation of storage pH on the RBC storage lesion and on erythrocyte survival after transfusion. Murine pRBCs were stored in Additive Solution-3 (AS3) under standard conditions (pH, 5.8), acidic AS3 (pH, 4.5), or alkalinized AS3 (pH, 8.5). pRBC units were analyzed at the end of the storage period. Several components of the storage lesion were measured, including cell-free hemoglobin, microparticle production, phosphatidylserine externalization, lactate accumulation, and byproducts of lipid peroxidation. Carboxyfluorescein-labeled erythrocytes were transfused into healthy mice to determine cell survival. Compared with pRBCs stored in standard AS3, those stored in alkaline solution exhibited decreased hemolysis, phosphatidylserine externalization, microparticle production, and lipid peroxidation. Lactate levels were greater after storage in alkaline conditions, suggesting that these pRBCs remained more metabolically viable. Storage in acidic AS3 accelerated erythrocyte deterioration. Compared with standard AS3 storage, circulating half-life of cells was increased by alkaline storage but decreased in acidic conditions. Storage pH significantly affects the quality of stored RBCs and cell survival after transfusion. Current erythrocyte storage solutions may benefit from refinements in pH levels. Copyright © 2016 Elsevier Inc. All rights reserved.

A systemic approach to explore the flexibility of energy stores at the cellular scale: Examples from muscle cells.

PubMed

Taghipoor, Masoomeh; van Milgen, Jaap; Gondret, Florence

2016-09-07

Variations in energy storage and expenditure are key elements for animals adaptation to rapidly changing environments. Because of the multiplicity of metabolic pathways, metabolic crossroads and interactions between anabolic and catabolic processes within and between different cells, the flexibility of energy stores in animal cells is difficult to describe by simple verbal, textual or graphic terms. We propose a mathematical model to study the influence of internal and external challenges on the dynamic behavior of energy stores and its consequence on cell energy status. The role of the flexibility of energy stores on the energy equilibrium at the cellular level is illustrated through three case studies: variation in eating frequency (i.e., glucose input), level of physical activity (i.e., ATP requirement), and changes in cell characteristics (i.e., maximum capacity of glycogen storage). Sensitivity analysis has been performed to highlight the most relevant parameters of the model; model simulations have then been performed to illustrate how variation in these key parameters affects cellular energy balance. According to this analysis, glycogen maximum accumulation capacity and homeostatic energy demand are among the most important parameters regulating muscle cell metabolism to ensure its energy equilibrium. Copyright © 2016 Elsevier Ltd. All rights reserved.

Cluster-based query expansion using external collections in medical information retrieval.

PubMed

Oh, Heung-Seon; Jung, Yuchul

2015-12-01

Utilizing external collections to improve retrieval performance is challenging research because various test collections are created for different purposes. Improving medical information retrieval has also gained much attention as various types of medical documents have become available to researchers ever since they started storing them in machine processable formats. In this paper, we propose an effective method of utilizing external collections based on the pseudo relevance feedback approach. Our method incorporates the structure of external collections in estimating individual components in the final feedback model. Extensive experiments on three medical collections (TREC CDS, CLEF eHealth, and OHSUMED) were performed, and the results were compared with a representative expansion approach utilizing the external collections to show the superiority of our method. Copyright © 2015 Elsevier Inc. All rights reserved.

Negative-Electrode Catalysts for Fe/Cr Redox Cells

NASA Technical Reports Server (NTRS)

Gahn, R. F.; Hagedorn, N.

1987-01-01

Electrodes perform more consistently and less expensive. Surfaces catalyzed by bismuth and bismuth/lead developed for application on chromium electrode in iron/chromium redox electrochemical energy storage system. NASA Fe/Cr storage system incorporates two soluble electrodes consisting of acidified solutions of iron chloride (FeC13 and FeC12) and chromium chloride (CrC13 and CrC12) oxidized and reduced in power-conversion unit to store and produce electricity. Electrolytes circulated with pumps and stored in external tanks.

Energy Efficiency for Military Aircraft and Operations: Surveillance, Reconnaissance, Tanker

DTIC Science & Technology

2009-06-01

overall sense (alluding to Exergy ) with reference to Logistics and Mobility considerations. In military aircraft operations, depending on the mission...stores at TOW: 10,000, WP:3000, Fuel: 3000, the Reaper has an endurance of 32 hrs at 50,000 ft. If the wings are extended to 86 ft span, internal fuel...Guided Bomb capability. Stores are carried externally on up to six wing pylons (31,500 lb max, Ref.22). Internal fuel capacity is 33,550 lb and

An external logic architecture for implementing traffic signal system control strategies.

DOT National Transportation Integrated Search

2011-09-01

The built-in logic functions in traffic controllers have very limited capability to store information, to analyze input data, to estimate performance measures, and to adopt control strategy decisions. These capabilities are imperative to support traf...

Vacuum-Gauge Connection For Shipping Container

NASA Technical Reports Server (NTRS)

Henry, Robert H.

1990-01-01

External connector enables measurement of vacuum in stored part. Remote-readout connector added to shipping container and connected to thermo-couple vacuum gauge in vacuum-insulated cryogenic line packed in container. Enables monitoring of condition of vacuum without opening container.

76 FR 72400 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-23

... developed biometric information systems capable of collecting and storing biometric images, associated biographic and contextual information; matching biometrics against local and external biometric galleries; displaying the results of the biometric searches; and as appropriate issuing credentials that contains the...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nekoogar, Faranak; Reynolds, Matthew; Lefton, Scott

A secure optionally passive RFID tag or sensor system comprises a passive RFID tag having means for receiving radio signals from at least one base station and for transmitting radio signals to at least one base station, where the tag is capable of being powered exclusively by received radio energy, and an external power and data logging device having at least one battery and electronic circuitry including a digital memory configured for storing and recalling data. The external power and data logging device has a means for powering the tag, and also has a means.

Design and Fabrication of the NASA Decoupler Pylon for the F-16 Aircraft

NASA Technical Reports Server (NTRS)

Clayton, J. D.; Haller, R. L.; Hassler, J. M., Jr.

1985-01-01

The NASA Decoupler Pylon is a passive means of suppressing wing-store flutter. The feasibility of demonstrating this concept on the F-16 aircraft was established through model wind tunnel tests and analyses. As a result of these tests and studies a ship set of Decoupler Pylons was designed and fabricated for a flight test demonstration on the F-16 aircraft. Basic design criteria were developed during the analysis study pertaining to pylon pitch stiffness, alignment system requirements, and damping requirements. A design was developed which utilized an electrical motor for the pylon alignment system. The design uses a four pin, two link pivot design which results in a remote pivot located at the center of gravity of the store when the store is in the aligned position. The pitch spring was fabricated from a tapered constant stress cantilevered beam. The pylon has the same external lines as the existing production pylon and is designed to use a MAU-12 ejection rack which is the same as the one used with the production pylon. The detailed design and fabrication was supported with a complete ground test of the pylon prior to shipment to NASA.

Direct observation of coherent energy transfer in nonlinear micromechanical oscillators.

PubMed

Chen, Changyao; Zanette, Damián H; Czaplewski, David A; Shaw, Steven; López, Daniel

2017-05-26

Energy dissipation is an unavoidable phenomenon of physical systems that are directly coupled to an external environmental bath. In an oscillatory system, it leads to the decay of the oscillation amplitude. In situations where stable oscillations are required, the energy dissipated by the vibrations is usually compensated by replenishment from external energy sources. Consequently, if the external energy supply is removed, the amplitude of oscillations start to decay immediately, since there is no means to restitute the energy dissipated. Here, we demonstrate a novel dissipation engineering strategy that can support stable oscillations without supplying external energy to compensate losses. The fundamental intrinsic mechanism of resonant mode coupling is used to redistribute and store mechanical energy among vibrational modes and coherently transfer it back to the principal mode when the external excitation is off. To experimentally demonstrate this phenomenon, we exploit the nonlinear dynamic response of microelectromechanical oscillators to couple two different vibrational modes through an internal resonance.

Deep wells integrated with microfluidic valves for stable docking and storage of cells.

PubMed

Jang, Yun-Ho; Kwon, Cheong Hoon; Kim, Sang Bok; Selimović, Seila; Sim, Woo Young; Bae, Hojae; Khademhosseini, Ali

2011-02-01

In this paper, we describe a microfluidic mechanism that combines microfluidic valves and deep wells for cell localization and storage. Cells are first introduced into the device via externally controlled flow. Activating on-chip valves was used to interrupt the flow and to sediment the cells floating above the wells. Thus, valves could be used to localize the cells in the desired locations. We quantified the effect of valves in the cell storage process by comparing the total number of cells stored with and without valve activation. We hypothesized that in deep wells external flows generate low shear stress regions that enable stable, long-term docking of cells. To assess this hypothesis we conducted numerical calculations to understand the influence of well depth on the forces acting on cells. We verified those predictions experimentally by comparing the fraction of stored cells as a function of the well depth and input flow rate upon activation of the valves. As expected, upon reintroduction of the flow the cells in the deep wells were not moved whereas those in shallow wells were washed away. Taken together, our paper demonstrates that deep wells and valves can be combined to enable a broad range of cell studies. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effect of moisture sorption on the performance of crospovidone.

PubMed

Hiew, Tze Ning; Johan, Nur Atiqah Binte; Desai, Parind Mahendrakumar; Chua, Siang Meng; Loh, Zhi Hui; Heng, Paul Wan Sia

2016-11-30

Crospovidone is a commonly used tablet disintegrant. However, the synthetic disintegrant has been known to be hygroscopic and high moisture content in crospovidone used could exert deleterious effects on tablets formulated with it. The objective of this study was to elicit a better understanding between crospovidone-water interaction and its effect on disintegrant performance. Moisture sorption and desorption isotherms were obtained together with the enthalpy of immersion. Crospovidone samples stored at four relative humidities were used to formulate tablets and the resultant tablets were evaluated for their mechanical, dimensional and disintegratability attributes. Analyses of the moisture sorption isotherms indicated that externally adsorbed moisture accounted for the bulk of the total moisture content in crospovidone, with minimal amount of moisture absorbed intramolecularly. Enthalpy of immersion became less exothermic with crospovidone samples stored at increasing storage humidity. Correspondingly, improvement in disintegration time became less pronounced. This was postulated to be a consequence of premature wetting of the particle surfaces by externally adsorbed moisture. High humidity was also detrimental to tablet hardness and thickness. In conclusion, the impact of moisture sorption during storage by excipients such as crospovidone could be better understood by the appreciation of crospovidone-water interaction and its consequence on tablet quality. Copyright © 2016 Elsevier B.V. All rights reserved.

Mechanisms of Working Memory Disruption by External Interference

PubMed Central

Rubens, Michael T.; Gazzaley, Adam

2010-01-01

The negative impact of external interference on working memory (WM) performance is well documented; yet, the mechanisms underlying this disruption are not sufficiently understood. In this study, electroencephalogram and functional magnetic resonance imaging (fMRI) data were recorded in separate experiments that each introduced different types of visual interference during a period of WM maintenance: distraction (irrelevant stimuli) and interruption (stimuli that required attention). The data converged to reveal that regardless of the type of interference, the magnitude of processing interfering stimuli in the visual cortex (as rapidly as 100 ms) predicted subsequent WM recognition accuracy for stored items. fMRI connectivity analyses suggested that in the presence of distraction, encoded items were maintained throughout the delay period via connectivity between the middle frontal gyrus and visual association cortex, whereas memoranda were not maintained when subjects were interrupted but rather reactivated in the postinterruption period. These results elucidate the mechanisms of external interference on WM performance and highlight similarities and differences of distraction and multitasking. PMID:19648173

On equations of motion of a nonlinear hydroelastic structure

NASA Astrophysics Data System (ADS)

Plotnikov, P. I.; Kuznetsov, I. V.

2008-07-01

Formal derivation of equations of a nonlinear hydroelastic structure, which is a volume of an ideal incompressible fluid covered by a shell, is proposed. The study is based on two assumptions. The first assumption implies that the energy stored in the shell is completely determined by the mean curvature and by the elementary area. In a three-dimensional case, the energy stored in the shell is chosen in the form of the Willmore functional. In a two-dimensional case, a more generic form of the functional can be considered. The second assumption implies that the equations of motionhave a Hamiltonian structure and can be obtained from the Lagrangian variational principle. In a two-dimensional case, a condition for the hydroelastic structure is derived, which relates the external pressure and the curvature of the elastic shell.

Addressing as low as reasonably achievable (ALARA) issues: investigation of worker collective external and extremity dose data

DOE PAGES

Cournoyer, Michael Edward; Costigan, Stephen Andrew; Schreiber, Stephen Bruce

2017-03-17

Plutonium emits both neutrons and photons and when it is stored or handled inside a glovebox, both photons and neutrons are significant external radiation hazards. Doses to the extremities are usually dominated by gamma radiation in typical plutonium glovebox operations. Excess external dose can generates stochastic effects consisting of cancer and benign tumors in some organs. Direct doses from radiation sources external to the body are measured by thermoluminescent dosimeters (TLDs) placed on the glovebox worker between the neck and waist. Wrist dosimeters are used to assess externally penetrating radiation including neutrons and provide an estimate of neutron radiation exposuremore » to the extremities. Both TLDs and wrist dosimeters are processed monthly for most glovebox workers. Here, worker collective extremity and external dose data have been analyzed to prevent and mitigate external radiation events through the use of Lean Manufacturing and Six Sigma business practices (LSS). Employing LSS, statistically significant variations (trends) are identified in worker collective extremity and external dose data. Finally, the research results presented in this paper are pivotal to the ultimate focus of this program, which is to minimize external radiation events.« less

Addressing as low as reasonably achievable (ALARA) issues: investigation of worker collective external and extremity dose data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cournoyer, Michael Edward; Costigan, Stephen Andrew; Schreiber, Stephen Bruce

Plutonium emits both neutrons and photons and when it is stored or handled inside a glovebox, both photons and neutrons are significant external radiation hazards. Doses to the extremities are usually dominated by gamma radiation in typical plutonium glovebox operations. Excess external dose can generates stochastic effects consisting of cancer and benign tumors in some organs. Direct doses from radiation sources external to the body are measured by thermoluminescent dosimeters (TLDs) placed on the glovebox worker between the neck and waist. Wrist dosimeters are used to assess externally penetrating radiation including neutrons and provide an estimate of neutron radiation exposuremore » to the extremities. Both TLDs and wrist dosimeters are processed monthly for most glovebox workers. Here, worker collective extremity and external dose data have been analyzed to prevent and mitigate external radiation events through the use of Lean Manufacturing and Six Sigma business practices (LSS). Employing LSS, statistically significant variations (trends) are identified in worker collective extremity and external dose data. Finally, the research results presented in this paper are pivotal to the ultimate focus of this program, which is to minimize external radiation events.« less

Processing device with self-scrubbing logic

DOEpatents

Wojahn, Christopher K.

2016-03-01

An apparatus includes a processing unit including a configuration memory and self-scrubber logic coupled to read the configuration memory to detect compromised data stored in the configuration memory. The apparatus also includes a watchdog unit external to the processing unit and coupled to the self-scrubber logic to detect a failure in the self-scrubber logic. The watchdog unit is coupled to the processing unit to selectively reset the processing unit in response to detecting the failure in the self-scrubber logic. The apparatus also includes an external memory external to the processing unit and coupled to send configuration data to the configuration memory in response to a data feed signal outputted by the self-scrubber logic.

Reliability of a retail food store survey and development of an accompanying retail scoring system to communicate survey findings and identify vendors for healthful food and marketing initiatives.

PubMed

Ghirardelli, Alyssa; Quinn, Valerie; Sugerman, Sharon

2011-01-01

To develop a retail grocery instrument with weighted scoring to be used as an indicator of the food environment. Twenty six retail food stores in low-income areas in California. Observational. Inter-rater reliability for grocery store survey instrument. Description of store scoring methodology weighted to emphasize availability of healthful food. Type A intra-class correlation coefficients (ICC) with absolute agreement definition or a κ test for measures using ranges as categories. Measures of availability and price of fruits and vegetables performed well in reliability testing (κ = 0.681-0.800). Items for vegetable quality were better than for fruit (ICC 0.708 vs 0.528). Kappa scores indicated low to moderate agreement (0.372-0.674) on external store marketing measures and higher scores for internal store marketing. "Next to" the checkout counter was more reliable than "within 6 feet." Health departments using the store scoring system reported it as the most useful communication of neighborhood findings. There was good reliability of the measures among the research pairs. The local store scores can show the need to bring in resources and to provide access to fruits and vegetables and other healthful food. Copyright © 2011 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

Discrete influx events refill depleted Ca2+ stores in a chick retinal neuron

PubMed Central

Borges, Salvador; Lindstrom, Sarah; Walters, Cameron; Warrier, Ajithkumar; Wilson, Martin

2008-01-01

The depletion of ER Ca2+ stores, following the release of Ca2+ during intracellular signalling, triggers the Ca2+ entry across the plasma membrane known as store-operated calcium entry (SOCE). We show here that brief, local [Ca2+]i increases (motes) in the thin dendrites of cultured retinal amacrine cells derived from chick embryos represent the Ca2+ entry events of SOCE and are initiated by sphingosine-1-phosphate (S1P), a sphingolipid with multiple cellular signalling roles. Externally applied S1P elicits motes but not through a G protein-coupled membrane receptor. The endogenous precursor to S1P, sphingosine, also elicits motes but its action is suppressed by dimethylsphingosine (DMS), an inhibitor of sphingosine phosphorylation. DMS also suppresses motes induced by store depletion and retards the refilling of depleted stores. These effects are reversed by exogenously applied S1P. In these neurons formation of S1P is a step in the SOCE pathway that promotes Ca2+ entry in the form of motes. PMID:18033816

Discrete influx events refill depleted Ca2+ stores in a chick retinal neuron.

PubMed

Borges, Salvador; Lindstrom, Sarah; Walters, Cameron; Warrier, Ajithkumar; Wilson, Martin

2008-01-15

The depletion of ER Ca2+ stores, following the release of Ca2+ during intracellular signalling, triggers the Ca2+ entry across the plasma membrane known as store-operated calcium entry (SOCE). We show here that brief, local [Ca2+]i increases (motes) in the thin dendrites of cultured retinal amacrine cells derived from chick embryos represent the Ca2+ entry events of SOCE and are initiated by sphingosine-1-phosphate (S1P), a sphingolipid with multiple cellular signalling roles. Externally applied S1P elicits motes but not through a G protein-coupled membrane receptor. The endogenous precursor to S1P, sphingosine, also elicits motes but its action is suppressed by dimethylsphingosine (DMS), an inhibitor of sphingosine phosphorylation. DMS also suppresses motes induced by store depletion and retards the refilling of depleted stores. These effects are reversed by exogenously applied S1P. In these neurons formation of S1P is a step in the SOCE pathway that promotes Ca2+ entry in the form of motes.

Enabling Long-Duration Lunar Equatorial Operations With Thermal Wadi Infrastructure

NASA Technical Reports Server (NTRS)

Jones, Heather L.; Thornton, John P.; Balasubramaniam, Ramaswamy; Gokoglu, Suleyman, A.; Sacksteder, Kurt R.; Whittaker, William L.

2011-01-01

Long duration missions on the Moon s equator must survive lunar nights. With 350 hr of cryogenic temperatures, lunar nights present a challenge to robotic survival. Insulation is imperfect, so it is not possible to passively contain enough heat to stay warm through the night. Components that enable mobility, environmental sensing and solar power generation must be exposed, and they leak heat. Small, lightweight rovers cannot store enough energy to warm components throughout the night without some external source of heat or power. Thermal wadis, however, can act as external heat sources to keep robots warm through the lunar night. Electrical power can also be provided to rovers during the night from batteries stored in the ground beside wadis. Buried batteries can be warmed by the wadi s heat. Results from analysis of the interaction between a rover and a wadi are presented. A detailed three-dimensional (3D) thermal model and an easily configurable two-dimensional (2D) thermal model are used for analysis.

Summary of Low-Lift Drag and Directional Stability Data from Rocket Models of the Douglas XF4D-1 Airplane with and without External Stores and Rocket Packets at Mach Numbers from 0.8 to 1.38 TED No. NACA DE-349

NASA Technical Reports Server (NTRS)

Mitcham, Grady L.; Blanchard, Willard S.; Hastings, Earl C., Jr.

1952-01-01

At the request of the Bureau of Aeronautics, Department of the Navy, an investigation at transonic and low supersonic speeds of the drag and longitudinal trim characteristics of the Douglas XF4D-1 airplane is being conducted by the Langley Pilotless Aircraft Research Division. The Douglas XF4D-1 is a jet-propelled, low-aspect-ratio, swept-wing, tailless, interceptor-type airplane designed to fly at low supersonic speeds. As a part of this investigation, flight tests were made using rocket- propelled 1/10- scale models to determine the effect of the addition of 10 external stores and rocket packets on the drag at low lift coefficients. In addition to these data, some qualitative values of the directional stability parameter C(sub n beta) and duct total-pressure recovery are also presented.

Does release of antimicrobial agents from impregnated external ventricular drainage catheters affect the diagnosis of ventriculitis?

PubMed

Bayston, Roger; Ashraf, Waheed; Ortori, Catherine

2016-02-01

Recently concern has arisen over the effect of released antimicrobial agents from antibiotic-impregnated external ventricular drainage (EVD) catheters on the reliability of CSF culture for diagnosis of ventriculitis. The authors designed a laboratory study to investigate this possibility, and to determine whether there was also a risk of loss of bacterial viability when CSF samples were delayed in transport to the laboratory. Three types of commercially available antibiotic-impregnated EVD catheters were perfused with a suspension of bacteria (Staphylococcus epidermidis) over 21 days. Samples were analyzed for bacterial viability and for concentrations of antibiotics released from the catheters. The authors also investigated the effect on bacterial viability in samples stored at 18°C and 4°C to simulate delay in CSF samples reaching the laboratory for analysis. Bacterial viability was significantly reduced in all 3 catheter types when sampled on Day 1, but this effect was not observed in later samples. The results were reflected in stored samples, with significant loss of viability in Day 1 samples but with little further loss of viable bacteria in samples obtained after this time point. All samples stored for 18 hours showed significant loss of viable bacteria. While there were differences between the catheters, only samples taken on Day 1 showed a significant reduction in the numbers of viable bacteria after passing through the catheters. This reduction coincided with higher concentrations of antimicrobial agents in the first few hours after perfusion began. Similarly, bacterial viability declined significantly after storage of Day 1 samples, but only slightly in samples obtained thereafter. The results indicate that drugs released from these antimicrobial catheters are unlikely to affect the diagnosis of ventriculitis, as sampling for this purpose is not usually conducted in the first 24 hours of EVD.

Another Store Down the Street

ERIC Educational Resources Information Center

Purdom, Tom

1978-01-01

Having no faculty or classrooms and offering no courses by mail or television, the external degree program at Thomas Edison State College in Pennsylvania is described as an accredited program whereby college credits are gained primarily through the use of CLEP (College Level Examination Program) tests and individual assessment. (BM)

Spin-Tunnel Investigation of a 1/20-Scale Model of the Northrop F-5E Airplane

NASA Technical Reports Server (NTRS)

Scher, Stanley H.; White, William L.

1977-01-01

An investigation has been conducted in the Langley spin tunnel to determine the spin and recovery characteristics of a 1/20-scale model of the Northrop F-5E airplane. The investigation included erect and inverted spins, a range of center-of- gravity locations and moments of inertia, symmetric and asymmetric store loadings, and a determination of the parachute size required for emergency spin recovery. The effects of increased elevator trailing-edge-up deflections, of leading-edge and trailing-edge flap deflections, and of simulating the geometry of large external stores were also determined.

Protein Simulation Data in the Relational Model.

PubMed

Simms, Andrew M; Daggett, Valerie

2012-10-01

High performance computing is leading to unprecedented volumes of data. Relational databases offer a robust and scalable model for storing and analyzing scientific data. However, these features do not come without a cost-significant design effort is required to build a functional and efficient repository. Modeling protein simulation data in a relational database presents several challenges: the data captured from individual simulations are large, multi-dimensional, and must integrate with both simulation software and external data sites. Here we present the dimensional design and relational implementation of a comprehensive data warehouse for storing and analyzing molecular dynamics simulations using SQL Server.

Protein Simulation Data in the Relational Model

PubMed Central

Simms, Andrew M.; Daggett, Valerie

2011-01-01

High performance computing is leading to unprecedented volumes of data. Relational databases offer a robust and scalable model for storing and analyzing scientific data. However, these features do not come without a cost—significant design effort is required to build a functional and efficient repository. Modeling protein simulation data in a relational database presents several challenges: the data captured from individual simulations are large, multi-dimensional, and must integrate with both simulation software and external data sites. Here we present the dimensional design and relational implementation of a comprehensive data warehouse for storing and analyzing molecular dynamics simulations using SQL Server. PMID:23204646

Outline of Toshiba Business Information Center

NASA Astrophysics Data System (ADS)

Nagata, Yoshihiro

Toshiba Business Information Center gathers and stores inhouse and external business information used in common within the Toshiba Corp., and provides companywide circulation, reference and other services. The Center established centralized information management system by employing decentralized computers, electronic file apparatus (30cm laser disc) and other office automation equipments. Online retrieval through LAN is available to search the stored documents and increasing copying requests are processed by electronic file. This paper describes the purpose of establishment of the Center, the facilities, management scheme, systematization of the files and the present situation and plan of each information service.

Calculation of the store house worker dose in a lost wax foundry using MCNP-4C.

PubMed

Alegría, Natalia; Legarda, Fernando; Herranz, Margarita; Idoeta, Raquel

2005-01-01

Lost wax casting is an industrial process which permits the transmutation into metal of models made in wax. The wax model is covered with a silicaceous shell of the required thickness and once this shell is built the set is heated and wax melted. Liquid metal is then cast into the shell replacing the wax. When the metal is cool, the shell is broken away in order to recover the metallic piece. In this process zircon sands are used for the preparation of the silicaceous shell. These sands have varying concentrations of natural radionuclides: 238U, 232Th and 235U together with their progenics. The zircon sand is distributed in bags of 50 kg, and 30 bags are on a pallet, weighing 1,500 kg. The pallets with the bags have dimensions 80 cm x 120 cm x 80 cm, and constitute the radiation source in this case. The only pathway of exposure to workers in the store house is external radiation. In this case there is no dust because the bags are closed and covered by plastic, the store house has a good ventilation rate and so radon accumulation is not possible. The workers do not touch with their hands the bags and consequently skin contamination will not take place. In this study all situations of external irradiation to the workers have been considered; transportation of the pallets from vehicle to store house, lifting the pallets to the shelf, resting of the stock on the shelf, getting down the pallets, and carrying the pallets to production area. Using MCNP-4C exposure situations have been simulated, considering that the source has a homogeneous composition, the minimum stock in the store house is constituted by 7 pallets, and the several distances between pallets and workers when they are at work. The photons flux obtained by MCNP-4C is multiplied by the conversion factor of Flux to Kerma for air by conversion factor to Effective Dose by Kerma unit, and by the number of emitted photons. Those conversion factors are obtained of ICRP 74 table 1 and table 17 respectively. This is the way to obtain a function giving dose rate around the source.

Sulfur metabolism in Beggiatoa alba.

PubMed Central

Schmidt, T M; Arieli, B; Cohen, Y; Padan, E; Strohl, W R

1987-01-01

The metabolism of sulfide, sulfur, and acetate by Beggiatoa alba was investigated under oxic and anoxic conditions. B. alba oxidized acetate to carbon dioxide with the stoichiometric reduction of oxygen to water. In vivo acetate oxidation was suppressed by sulfide and by several classic respiratory inhibitors, including dibromothymoquinone, an inhibitor specific for ubiquinones. B. alba also carried out an oxygen-dependent conversion of sulfide to sulfur, a reaction that was inhibited by several electron transport inhibitors but not by dibromothymoquinone, indicating that the electrons released from sulfide oxidation were shuttled to oxygen without the involvement of ubiquinones. Intracellular sulfur stored by B. alba was not oxidized to sulfate or converted to an external soluble form under aerobic conditions. On the other hand, sulfur stored by filaments of Thiothrix nivea was oxidized to extracellular soluble oxidation products, including sulfate. Sulfur stored by filaments of B. alba, however, was reduced to sulfide under short-term anoxic conditions. This anaerobic reduction of sulfur was linked to the endogenous oxidation of stored carbon and to hydrogen oxidation. PMID:3316186

A qualitative study on personal information management (PIM) in clinical and basic sciences faculty members of a medical university in Iran

PubMed Central

Sedghi, Shahram; Abdolahi, Nida; Azimi, Ali; Tahamtan, Iman; Abdollahi, Leila

2015-01-01

Background: Personal Information Management (PIM) refers to the tools and activities to save and retrieve personal information for future uses. This study examined the PIM activities of faculty members of Iran University of Medical Sciences (IUMS) regarding their preferred PIM tools and four aspects of acquiring, organizing, storing and retrieving personal information. Methods: The qualitative design was based on phenomenology approach and we carried out 37 interviews with clinical and basic sciences faculty members of IUMS in 2014. The participants were selected using a random sampling method. All interviews were recorded by a digital voice recorder, and then transcribed, codified and finally analyzed using NVivo 8 software. Results: The use of PIM electronic tools (e-tools) was below expectation among the studied sample and just 37% had reasonable knowledge of PIM e-tools such as, external hard drivers, flash memories etc. However, all participants used both paper and electronic devices to store and access information. Internal mass memories (in Laptops) and flash memories were the most used e-tools to save information. Most participants used "subject" (41.00%) and "file name" (33.7 %) to save, organize and retrieve their stored information. Most users preferred paper-based rather than electronic tools to keep their personal information. Conclusion: Faculty members had little knowledge about PIM techniques and tools. Those who organized personal information could easier retrieve the stored information for future uses. Enhancing familiarity with PIM tools and training courses of PIM tools and techniques are suggested. PMID:26793648

Crosstalk and transitions between multiple spatial maps in an attractor neural network model of the hippocampus: Collective motion of the activity

NASA Astrophysics Data System (ADS)

Monasson, R.; Rosay, S.

2014-03-01

The dynamics of a neural model for hippocampal place cells storing spatial maps is studied. In the absence of external input, depending on the number of cells and on the values of control parameters (number of environments stored, level of neural noise, average level of activity, connectivity of place cells), a "clump" of spatially localized activity can diffuse or remains pinned due to crosstalk between the environments. In the single-environment case, the macroscopic coefficient of diffusion of the clump and its effective mobility are calculated analytically from first principles and corroborated by numerical simulations. In the multienvironment case the heights and the widths of the pinning barriers are analytically characterized with the replica method; diffusion within one map is then in competition with transitions between different maps. Possible mechanisms enhancing mobility are proposed and tested.

Processing device with self-scrubbing logic

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wojahn, Christopher K.

An apparatus includes a processing unit including a configuration memory and self-scrubber logic coupled to read the configuration memory to detect compromised data stored in the configuration memory. The apparatus also includes a watchdog unit external to the processing unit and coupled to the self-scrubber logic to detect a failure in the self-scrubber logic. The watchdog unit is coupled to the processing unit to selectively reset the processing unit in response to detecting the failure in the self-scrubber logic. The apparatus also includes an external memory external to the processing unit and coupled to send configuration data to the configurationmore » memory in response to a data feed signal outputted by the self-scrubber logic.« less

47 CFR 11.33 - EAS Decoder.

Code of Federal Regulations, 2014 CFR

2014-10-01

...: (1) Inputs. Decoders must have the capability to receive at least two audio inputs from EAS... externally, at least two minutes of audio or text messages. A decoder manufactured without an internal means to record and store audio or text must be equipped with a means (such as an audio or digital jack...

47 CFR 11.33 - EAS Decoder.

Code of Federal Regulations, 2013 CFR

2013-10-01

...: (1) Inputs. Decoders must have the capability to receive at least two audio inputs from EAS... externally, at least two minutes of audio or text messages. A decoder manufactured without an internal means to record and store audio or text must be equipped with a means (such as an audio or digital jack...

47 CFR 11.33 - EAS Decoder.

Code of Federal Regulations, 2012 CFR

2012-10-01

...: (1) Inputs. Decoders must have the capability to receive at least two audio inputs from EAS... externally, at least two minutes of audio or text messages. A decoder manufactured without an internal means to record and store audio or text must be equipped with a means (such as an audio or digital jack...

Minicomputers in the Teaching Laboratory - An Example from Physics.

ERIC Educational Resources Information Center

Farr, John E.; van den Berg, Willem H.

Microcomputers are commonly interfaced to external devices in scientific, industrial, and consumer settings for data acquisition and for control. The general problem under consideration is the task of taking measurements of some continuous phenomenon, transforming them into digital form, and storing the data in the microcomputer for later use.…

Single atoms in a MOT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meschede, Dieter; Ueberholz, Bernd; Gomer, Victor

1999-06-11

We are experimenting with individual neutral cesium atoms stored in a magneto-optical trap. The atoms are detected by their resonance fluorescence, and fluorescence fluctuations contain signatures of the atomic internal and external degrees of freedom. This noninvasive probe provides a rich source of information about atomic dynamics at all relevant time scales.

76 FR 8872 - License and Certificate of Compliance Terms

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-16

... external stakeholders that submitted comments were the Nuclear Energy Institute and Florida Power and Light... five comment letters on the proposed rule. These comments came from the Nuclear Energy Institute, the U... fuel can be stored safely and without significant environmental impacts at ISFSIs during the extended...

Direct observation of coherent energy transfer in nonlinear micromechanical oscillators

DOE PAGES

Chen, Changyao; Zanette, Damian H.; Czaplewski, David A.; ...

2017-05-26

Energy dissipation is an unavoidable phenomenon of physical systems that are directly coupled to an external environmental bath. In an oscillatory system, it leads to the decay of the oscillation amplitude. In situations where stable oscillations are required, the energy dissipated by the vibrations is usually compensated by replenishment from external energy sources. Consequently, if the external energy supply is removed, the amplitude of oscillations start to decay immediately, since there is no means to restitute the energy dissipated. Here, we demonstrate a novel dissipation engineering strategy that can support stable oscillations without supplying external energy to compensate losses. Themore » fundamental intrinsic mechanism of resonant mode coupling is used to redistribute and store mechanical energy among vibrational modes and coherently transfer it back to the principal mode when the external excitation is off. To experimentally demonstrate this phenomenon, we exploit the nonlinear dynamic response of microelectromechanical oscillators to couple two different vibrational modes through an internal resonance.« less

Direct observation of coherent energy transfer in nonlinear micromechanical oscillators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Changyao; Zanette, Damian H.; Czaplewski, David A.

Energy dissipation is an unavoidable phenomenon of physical systems that are directly coupled to an external environmental bath. In an oscillatory system, it leads to the decay of the oscillation amplitude. In situations where stable oscillations are required, the energy dissipated by the vibrations is usually compensated by replenishment from external energy sources. Consequently, if the external energy supply is removed, the amplitude of oscillations start to decay immediately, since there is no means to restitute the energy dissipated. Here, we demonstrate a novel dissipation engineering strategy that can support stable oscillations without supplying external energy to compensate losses. Themore » fundamental intrinsic mechanism of resonant mode coupling is used to redistribute and store mechanical energy among vibrational modes and coherently transfer it back to the principal mode when the external excitation is off. To experimentally demonstrate this phenomenon, we exploit the nonlinear dynamic response of microelectromechanical oscillators to couple two different vibrational modes through an internal resonance.« less

Anatomical study of the pigs temporal bone by microdissection.

PubMed

Garcia, Leandro de Borborema; Andrade, José Santos Cruz de; Testa, José Ricardo Gurgel

2014-01-01

Initial study of the pig`s temporal bone anatomy in order to enable a new experimental model in ear surgery. Dissection of five temporal bones of Sus scrofa pigs obtained from UNIFESP - Surgical Skills Laboratory, removed with hole saw to avoid any injury and stored in formaldehyde 10% for better conservation. The microdissection in all five temporal bone had the following steps: inspection of the outer part, external canal and tympanic membrane microscopy, mastoidectomy, removal of external ear canal and tympanic membrane, inspection of ossicular chain and middle ear. Anatomically it is located at the same position than in humans. Some landmarks usually found in humans are missing. The tympanic membrane of the pig showed to be very similar to the human, separating the external and the middle ear. The middle ear`s appearance is very similar than in humans. The ossicular chain is almost exactly the same, as well as the facial nerve, showing the same relationship with the lateral semicircular canal. The temporal bone of the pigs can be used as an alternative for training in ear surgery, especially due the facility to find it and its similarity with temporal bone of the humans.

Transportation Safety of Lithium Iron Phosphate Batteries - A Feasibility Study of Storing at Very Low States of Charge.

PubMed

Barai, Anup; Uddin, Kotub; Chevalier, Julie; Chouchelamane, Gael H; McGordon, Andrew; Low, John; Jennings, Paul

2017-07-11

In freight classification, lithium-ion batteries are classed as dangerous goods and are therefore subject to stringent regulations and guidelines for certification for safe transport. One such guideline is the requirement for batteries to be at a state of charge of 30%. Under such conditions, a significant amount of the battery's energy is stored; in the event of mismanagement, or indeed an airside incident, this energy can lead to ignition and a fire. In this work, we investigate the effect on the battery of removing 99.1% of the total stored energy. The performance of 8Ah C 6 /LiFePO 4 pouch cells were measured following periods of calendar ageing at low voltages, at and well below the manufacturer's recommended value. Battery degradation was monitored using impedance spectroscopy and capacity tests; the results show that the cells stored at 2.3 V exhibited no change in cell capacity after 90 days; resistance rise was negligible. Energy-dispersive X-ray spectroscopy results indicate that there was no significant copper dissolution. To test the safety of the batteries at low voltages, external short-circuit tests were performed on the cells. While the cells discharged to 2.3 V only exhibited a surface temperature rise of 6 °C, cells at higher voltages exhibited sparks, fumes and fire.

Magnetic suspension and balance system advanced study, 1989 design

NASA Technical Reports Server (NTRS)

Boom, Roger W.; Eyssa, Y. M.; Abdelsalam, Moustafa K.; Mcintosh, Glen E.

1991-01-01

The objectives are to experimentally confirm several advanced design concepts on the Magnetic Suspension and Balance Systems (MSBS). The advanced design concepts were identified as potential improvements by Madison Magnetics, Inc. (MMI) during 1984 and 1985 studies of an MSBS utilizing 14 external superconductive coils and a superconductive solenoid in an airplane test model suspended in a wind tunnel. This study confirmed several advanced design concepts on magnetic suspension and balance systems. The 1989 MSBS redesign is based on the results of these experiments. Savings of up to 30 percent in supporting magnet ampere meters and 50 percent in energy stored over the 1985 design were achieved.

Study of the Physics of Insulating Films as Related to the Reliability of Metal-Oxide-Semiconductor (MOS) Devices

DTIC Science & Technology

1981-06-01

believed to be due to irregularities in the field at the cathode) from occurring. These DEIS EAROMs operate at lower power due to the small injected SiO...memory devices which can store information without an external power supply for long periods of time are currently an area of much interest [1-5]. Current...oppose each other. These require- ments are to get charge into and out of a charge storage layer at low voltages and powers in times on the order of

Acquisition and analysis of primate physiologic data for the Space Shuttle

NASA Astrophysics Data System (ADS)

Eberhart, Russell C.; Hogrefe, Arthur F.; Radford, Wade E.; Sanders, Kermit H.; Dobbins, Roy W.

1988-03-01

This paper describes the design and prototypes of the Physiologic Acquisition and Telemetry System (PATS), which is a multichannel system, designed for large primates, for the data acquisition, telemetry, storage, and analysis of physiological data. PATS is expected to acquire data from units implanted in the abdominal cavities of rhesus monkeys that will be flown aboard the Spacelab. The system will telemeter both stored and real-time internal physiologic measurements to an external Flight Support Station (FSS) computer system. The implanted Data Acquition and Telemetry Subsystem subunit will be externally activated, controlled and reprogrammed from the FSS.

Managing Attribute—Value Clinical Trials Data Using the ACT/DB Client—Server Database System

PubMed Central

Nadkarni, Prakash M.; Brandt, Cynthia; Frawley, Sandra; Sayward, Frederick G.; Einbinder, Robin; Zelterman, Daniel; Schacter, Lee; Miller, Perry L.

1998-01-01

ACT/DB is a client—server database application for storing clinical trials and outcomes data, which is currently undergoing initial pilot use. It stores most of its data in entity—attribute—value form. Such data are segregated according to data type to allow indexing by value when possible, and binary large object data are managed in the same way as other data. ACT/DB lets an investigator design a study rapidly by defining the parameters (or attributes) that are to be gathered, as well as their logical grouping for purposes of display and data entry. ACT/DB generates customizable data entry. The data can be viewed through several standard reports as well as exported as text to external analysis programs. ACT/DB is designed to encourage reuse of parameters across multiple studies and has facilities for dictionary search and maintenance. It uses a Microsoft Access client running on Windows 95 machines, which communicates with an Oracle server running on a UNIX platform. ACT/DB is being used to manage the data for seven studies in its initial deployment. PMID:9524347

Embarkables Root Cause for Navy Networks

DTIC Science & Technology

2012-03-01

incondicional y el estímulo que siempre me brindaron para seguir adelante hasta lograr esta nueva meta. Con amor y agradecimiento infinito, los quiero...N47 VTC capabi lities N48 Access to IT-21 Global Address List N49 Access to IT-21 resources such as applications NSO Ab ility to store to external

The use of archived tags in retrospective genetic analysis of fish.

PubMed

Bonanomi, Sara; Therkildsen, Nina Overgaard; Hedeholm, Rasmus Berg; Hemmer-Hansen, Jakob; Nielsen, Einar E

2014-05-01

Collections of historical tissue samples from fish (e.g. scales and otoliths) stored in museums and fisheries institutions are precious sources of DNA for conducting retrospective genetic analysis. However, in some cases, only external tags used for documentation of spatial dynamics of fish populations have been preserved. Here, we test the usefulness of fish tags as a source of DNA for genetic analysis. We extract DNA from historical tags from cod collected in Greenlandic waters between 1950 and 1968. We show that the quantity and quality of DNA recovered from tags is comparable to DNA from archived otoliths from the same individuals. Surprisingly, levels of cross-contamination do not seem to be significantly higher in DNA from external (tag) than internal (otolith) sources. Our study therefore demonstrates that historical tags can be a highly valuable source of DNA for retrospective genetic analysis of fish. © 2013 John Wiley & Sons Ltd.

Avalanches in Mn12-Acetate: ``Magnetic Burning"

NASA Astrophysics Data System (ADS)

McHugh, Sean; Suzuki, Y.; Graybill, D.; Sarachik, M. P.; Avraham, N.; Myasoedov, Y.; Shtrikman, H.; Zeldov, E.; Bagai, R.; Chakov, N. E.; Christou, G.

2006-03-01

From local time-resolved measurements of fast reversal of the magnetization in single crystals of the molecular magnet Mn12-acetate, we have shown[1] that the magnetization avalanche spreads as a narrow interface that propagates through the crystal at a constant velocity roughly two orders of magnitude smaller than the speed of sound. This phenomenon is closely analogous to the propagation of a flame front (deflagration) through a flammable chemical substance. The propagation speed of the avalanche depends on the energy stored in each molecule, which can be controlled and tuned using an external magnetic field. We report studies of propagation speed with different external fields in Mn12-acetate. [1] Yoko Suzuki, M.P. Sarachik, E.M. Chudnovsky, S. McHugh, R. Gonzalez-Rubio, N. Avraham, Y. Myasoedov, H. Shtrikman, E. Zeldov, N.E. Chakov and G. Christou, Phys. Rev. Lett. 95, 147201 (2005).

The moderating role of food cue sensitivity in the behavioral response of children to their neighborhood food environment: a cross-sectional study.

PubMed

Paquet, Catherine; de Montigny, Luc; Labban, Alice; Buckeridge, David; Ma, Yu; Arora, Narendra; Dubé, Laurette

2017-07-05

Neighborhood food cues have been inconsistently related to residents' health, possibly due to variations in residents' sensitivity to such cues. This study sought to investigate the degree to which children's predisposition to eat upon exposure to food environment and food cues (external eating), could explain differences in strength of associations between their food consumption and the type of food outlets and marketing strategies present in their neighborhood. Data were obtained from 616 6-12 y.o. children recruited into a population-based cross-sectional study in which food consumption was measured through a 24-h food recall and responsiveness to food cues measured using the external eating scale. The proportion of food retailers within 3 km of residence considered as "healthful" was calculated using a Geographical Information System. Neighborhood exposure to food marketing strategies (displays, discount frequency, variety, and price) for vegetables and soft drinks were derived from a geocoded digital marketing database. Adjusted mixed models with spatial covariance tested interaction effects of food environment indicators and external eating on food consumption. In children with higher external eating scores, healthful food consumption was more positively related to vegetable displays, and more negatively to the display and variety of soft drinks. No interactions were observed for unhealthful food consumption and no main effects of food environment indicators were found on food consumption. Children differ in their responsiveness to marketing-related visual food cues on the basis of their external eating phenotype. Strategies aiming to increase the promotion of healthful relative to unhealthful food products in stores may be particularly beneficial for children identified as being more responsive to food cues.

Globally optimal superconducting magnets part II: symmetric MSE coil arrangement.

PubMed

Tieng, Quang M; Vegh, Viktor; Brereton, Ian M

2009-01-01

A globally optimal superconducting magnet coil design procedure based on the Minimum Stored Energy (MSE) current density map is outlined. The method has the ability to arrange coils in a manner that generates a strong and homogeneous axial magnetic field over a predefined region, and ensures the stray field external to the assembly and peak magnetic field at the wires are in acceptable ranges. The outlined strategy of allocating coils within a given domain suggests that coils should be placed around the perimeter of the domain with adjacent coils possessing alternating winding directions for optimum performance. The underlying current density maps from which the coils themselves are derived are unique, and optimized to possess minimal stored energy. Therefore, the method produces magnet designs with the lowest possible overall stored energy. Optimal coil layouts are provided for unshielded and shielded short bore symmetric superconducting magnets.

Integrating data from an online diabetes prevention program into an electronic health record and clinical workflow, a design phase usability study.

PubMed

Mishuris, Rebecca Grochow; Yoder, Jordan; Wilson, Dan; Mann, Devin

2016-07-11

Health information is increasingly being digitally stored and exchanged. The public is regularly collecting and storing health-related data on their own electronic devices and in the cloud. Diabetes prevention is an increasingly important preventive health measure, and diet and exercise are key components of this. Patients are turning to online programs to help them lose weight. Despite primary care physicians being important in patients' weight loss success, there is no exchange of information between the primary care provider (PCP) and these online weight loss programs. There is an emerging opportunity to integrate this data directly into the electronic health record (EHR), but little is known about what information to share or how to share it most effectively. This study aims to characterize the preferences of providers concerning the integration of externally generated lifestyle modification data into a primary care EHR workflow. We performed a qualitative study using two rounds of semi-structured interviews with primary care providers. We used an iterative design process involving primary care providers, health information technology software developers and health services researchers to develop the interface. Using grounded-theory thematic analysis 4 themes emerged from the interviews: 1) barriers to establishing healthy lifestyles, 2) features of a lifestyle modification program, 3) reporting of outcomes to the primary care provider, and 4) integration with primary care. These themes guided the rapid-cycle agile design process of an interface of data from an online diabetes prevention program into the primary care EHR workflow. The integration of external health-related data into the EHR must be embedded into the provider workflow in order to be useful to the provider and beneficial for the patient. Accomplishing this requires evaluation of that clinical workflow during software design. The development of this novel interface used rapid cycle iterative design, early involvement by providers, and usability testing methodology. This provides a framework for how to integrate external data into provider workflow in efficient and effective ways. There is now the potential to realize the importance of having this data available in the clinical setting for patient engagement and health outcomes.

Relating the Stored Magnetic Energy of a Parallel-Plate Inductor to the Work of External Forces

ERIC Educational Resources Information Center

Gauthier, N.

2007-01-01

Idealized models are often used in introductory physics courses. For one, such models involve simple mathematics, which is a definite plus since complex mathematical manipulations quickly become an obstacle rather than a tool for a beginner. Idealized models facilitate a student's understanding and grasp of a given physical phenomenon, yet they…

Checkpoint-Restart in User Space

DOE Office of Scientific and Technical Information (OSTI.GOV)

CRUISE implements a user-space file system that stores data in main memory and transparently spills over to other storage, like local flash memory or the parallel file system, as needed. CRUISE also exposes file contents fo remote direct memory access, allowing external tools to copy files to the parallel file system in the background with reduced CPU interruption.

46 CFR 54.15-5 - Protective devices (modifies UG-125).

Code of Federal Regulations, 2014 CFR

2014-10-01

... evaporator or heat exchanger (see § 54.01-10) shall be equipped with protective devices as required by § 54... unexpected source of heat. (d) Where an additional hazard can be created by exposure of a pressure vessel to fire or other unexpected sources of external heat (for example, vessels used to store liquefied...

46 CFR 54.15-5 - Protective devices (modifies UG-125).

Code of Federal Regulations, 2012 CFR

2012-10-01

... evaporator or heat exchanger (see § 54.01-10) shall be equipped with protective devices as required by § 54... unexpected source of heat. (d) Where an additional hazard can be created by exposure of a pressure vessel to fire or other unexpected sources of external heat (for example, vessels used to store liquefied...

46 CFR 54.15-5 - Protective devices (modifies UG-125).

Code of Federal Regulations, 2013 CFR

2013-10-01

... evaporator or heat exchanger (see § 54.01-10) shall be equipped with protective devices as required by § 54... unexpected source of heat. (d) Where an additional hazard can be created by exposure of a pressure vessel to fire or other unexpected sources of external heat (for example, vessels used to store liquefied...

46 CFR 54.15-5 - Protective devices (modifies UG-125).

Code of Federal Regulations, 2010 CFR

2010-10-01

... evaporator or heat exchanger (see § 54.01-10) shall be equipped with protective devices as required by § 54... unexpected source of heat. (d) Where an additional hazard can be created by exposure of a pressure vessel to fire or other unexpected sources of external heat (for example, vessels used to store liquefied...

46 CFR 54.15-5 - Protective devices (modifies UG-125).

Code of Federal Regulations, 2011 CFR

2011-10-01

... evaporator or heat exchanger (see § 54.01-10) shall be equipped with protective devices as required by § 54... unexpected source of heat. (d) Where an additional hazard can be created by exposure of a pressure vessel to fire or other unexpected sources of external heat (for example, vessels used to store liquefied...

48 CFR 2452.204-70 - Preservation of, and access to, contract records (tangible and electronically stored information...

Code of Federal Regulations, 2013 CFR

2013-10-01

... or data storage). ESI devices and media include, but are not be limited to: (1) Computers (mainframe...) Personal data assistants (PDAs); (5) External data storage devices including portable devices (e.g., flash drive); and (6) Data storage media (magnetic, e.g., tape; optical, e.g., compact disc, microfilm, etc...

48 CFR 2452.204-70 - Preservation of, and access to, contract records (tangible and electronically stored information...

Code of Federal Regulations, 2014 CFR

2014-10-01

... or data storage). ESI devices and media include, but are not be limited to: (1) Computers (mainframe...) Personal data assistants (PDAs); (5) External data storage devices including portable devices (e.g., flash drive); and (6) Data storage media (magnetic, e.g., tape; optical, e.g., compact disc, microfilm, etc...

MedXViewer: an extensible web-enabled software package for medical imaging

NASA Astrophysics Data System (ADS)

Looney, P. T.; Young, K. C.; Mackenzie, Alistair; Halling-Brown, Mark D.

2014-03-01

MedXViewer (Medical eXtensible Viewer) is an application designed to allow workstation-independent, PACS-less viewing and interaction with anonymised medical images (e.g. observer studies). The application was initially implemented for use in digital mammography and tomosynthesis but the flexible software design allows it to be easily extended to other imaging modalities. Regions of interest can be identified by a user and any associated information about a mark, an image or a study can be added. The questions and settings can be easily configured depending on the need of the research allowing both ROC and FROC studies to be performed. The extensible nature of the design allows for other functionality and hanging protocols to be available for each study. Panning, windowing, zooming and moving through slices are all available while modality-specific features can be easily enabled e.g. quadrant zooming in mammographic studies. MedXViewer can integrate with a web-based image database allowing results and images to be stored centrally. The software and images can be downloaded remotely from this centralised data-store. Alternatively, the software can run without a network connection where the images and results can be encrypted and stored locally on a machine or external drive. Due to the advanced workstation-style functionality, the simple deployment on heterogeneous systems over the internet without a requirement for administrative access and the ability to utilise a centralised database, MedXViewer has been used for running remote paper-less observer studies and is capable of providing a training infrastructure and co-ordinating remote collaborative viewing sessions (e.g. cancer reviews, interesting cases).

Automatic public access to documents and maps stored on and internal secure system.

NASA Astrophysics Data System (ADS)

Trench, James; Carter, Mary

2013-04-01

The Geological Survey of Ireland operates a Document Management System for providing documents and maps stored internally in high resolution and in a high level secure environment, to an external service where the documents are automatically presented in a lower resolution to members of the public. Security is devised through roles and Individual Users where role level and folder level can be set. The application is an electronic document/data management (EDM) system which has a Geographical Information System (GIS) component integrated to allow users to query an interactive map of Ireland for data that relates to a particular area of interest. The data stored in the database consists of Bedrock Field Sheets, Bedrock Notebooks, Bedrock Maps, Geophysical Surveys, Geotechnical Maps & Reports, Groundwater, GSI Publications, Marine, Mine Records, Mineral Localities, Open File, Quaternary and Unpublished Reports. The Konfig application Tool is both an internal and public facing application. It acts as a tool for high resolution data entry which are stored in a high resolution vault. The public facing application is a mirror of the internal application and differs only in that the application furnishes high resolution data into low resolution format which is stored in a low resolution vault thus, making the data web friendly to the end user for download.

Heteroassociative storage of hippocampal pattern sequences in the CA3 subregion

PubMed Central

Recio, Renan S.; Reyes, Marcelo B.

2018-01-01

Background Recent research suggests that the CA3 subregion of the hippocampus has properties of both autoassociative network, due to its ability to complete partial cues, tolerate noise, and store associations between memories, and heteroassociative one, due to its ability to store and retrieve sequences of patterns. Although there are several computational models of the CA3 as an autoassociative network, more detailed evaluations of its heteroassociative properties are missing. Methods We developed a model of the CA3 subregion containing 10,000 integrate-and-fire neurons with both recurrent excitatory and inhibitory connections, and which exhibits coupled oscillations in the gamma and theta ranges. We stored thousands of pattern sequences using a heteroassociative learning rule with competitive synaptic scaling. Results We showed that a purely heteroassociative network model can (i) retrieve pattern sequences from partial cues with external noise and incomplete connectivity, (ii) achieve homeostasis regarding the number of connections per neuron when many patterns are stored when using synaptic scaling, (iii) continuously update the set of retrievable patterns, guaranteeing that the last stored patterns can be retrieved and older ones can be forgotten. Discussion Heteroassociative networks with synaptic scaling rules seem sufficient to achieve many desirable features regarding connectivity homeostasis, pattern sequence retrieval, noise tolerance and updating of the set of retrievable patterns. PMID:29312826

Multi-bit dark state memory: Double quantum dot as an electronic quantum memory

NASA Astrophysics Data System (ADS)

Aharon, Eran; Pozner, Roni; Lifshitz, Efrat; Peskin, Uri

2016-12-01

Quantum dot clusters enable the creation of dark states which preserve electrons or holes in a coherent superposition of dot states for a long time. Various quantum logic devices can be envisioned to arise from the possibility of storing such trapped particles for future release on demand. In this work, we consider a double quantum dot memory device, which enables the preservation of a coherent state to be released as multiple classical bits. Our unique device architecture uses an external gating for storing (writing) the coherent state and for retrieving (reading) the classical bits, in addition to exploiting an internal gating effect for the preservation of the coherent state.

Data management in automated external defibrillators: a call for a standardised solution.

PubMed

Nielsen, A M; Rasmussen, L S

2011-07-01

The ECG data stored in automated external defibrillators (AEDs) may be valuable for establishing a final diagnosis and deciding further diagnostics and treatment. Different data management systems are used and this may create significant problems for data storage and access for physicians treating victims in whom an AED has been used. In this descriptive study, we collected information (number, manufacturer and model) on 17 December 2010 from a web page used for the voluntary registration of AEDs in Denmark. The manufacturers were contacted and asked to provide information about data downloading. There were 12 different manufactures and 20 different AED models. Five models were registered in a quantity <5. We report data from the remaining 15 models (3603 AEDs). Several models stored only one case or 15 min of ECG data. All models had a data transfer option, but most had outdated 'hardware': Seven had infrared transfer; one had a cable with a serial port. Four had a removable memory device, but only one was a USB. The software was available as freeware only in a few cases. Otherwise, a CD ROM was needed, some even with a licence. The software for the second most common AED could not be installed. The development of data management solutions is not a high priority. We encourage the manufacturers to collaborate with researchers to develop a simple data transfer solution in order to improve patient care and facilitate research. © 2011 The Authors. Acta Anaesthesiologica Scandinavica © 2011 The Acta Anaesthesiologica Scandinavica Foundation.

On virial analysis at low aspect ratio

DOE PAGES

Bongard, Michael W.; Barr, Jayson L.; Fonck, Raymond J.; ...

2016-07-28

The validity of virial analysis to infer global MHD equilibrium poloidal beta β p and internal inductance ℓ i from external magnetics measurements is examined for low aspect ratio configurations with A < 2. Numerical equilibrium studies at varied aspect ratio are utilized to validate the technique at finite aspect ratio. The effect of applying high-A approximations to low-A experimental data is quantified and demonstrates significant over-estimation of stored energy (factors of 2–10) in spherical tokamak geometry. Experimental approximations to equilibrium-dependent volume integral terms in the analysis are evaluated at low-A. Highly paramagnetic configurations are found to be inadequately representedmore » through the virial mean radius parameter R T. Alternate formulations for inferring β p and ℓ i that are independent of R T to avoid this difficulty are presented for the static isotropic limit. Lastly, these formulations are suitable for fast estimation of tokamak stored energy components at low aspect ratio using virial analysis.« less

Preliminary survey of propulsion using chemical energy stored in the upper atmosphere

NASA Technical Reports Server (NTRS)

Baldwin, Lionel V; Blackshear, Perry L

1958-01-01

Ram-jet cycles that use the chemical energy of dissociated oxygen for propulsion in the ionosphere are presented. After a review of the properties and compositions of the upper atmosphere, the external drag, recombination kinetics, and aerodynamic-heating problems of an orbiting ram jet are analyzed. The study indicates that the recombination ram jet might be useful for sustaining a satellite at an altitude of about 60 miles. Atmospheric composition and recombination-rate coefficients were too uncertain for more definite conclusions. The ram jet is a marginal device even in the optimistic view.

Implementation of an anonymisation tool for clinical trials using a clinical trial processor integrated with an existing trial patient data information system.

PubMed

Aryanto, Kadek Y E; Broekema, André; Oudkerk, Matthijs; van Ooijen, Peter M A

2012-01-01

To present an adapted Clinical Trial Processor (CTP) test set-up for receiving, anonymising and saving Digital Imaging and Communications in Medicine (DICOM) data using external input from the original database of an existing clinical study information system to guide the anonymisation process. Two methods are presented for an adapted CTP test set-up. In the first method, images are pushed from the Picture Archiving and Communication System (PACS) using the DICOM protocol through a local network. In the second method, images are transferred through the internet using the HTTPS protocol. In total 25,000 images from 50 patients were moved from the PACS, anonymised and stored within roughly 2 h using the first method. In the second method, an average of 10 images per minute were transferred and processed over a residential connection. In both methods, no duplicated images were stored when previous images were retransferred. The anonymised images are stored in appropriate directories. The CTP can transfer and process DICOM images correctly in a very easy set-up providing a fast, secure and stable environment. The adapted CTP allows easy integration into an environment in which patient data are already included in an existing information system.

Intracellular ca2+ stores could participate to abscisic acid-induced depolarization and stomatal closure in Arabidopsis thaliana

PubMed Central

Meimoun, Patrice; Vidal, Guillaume; Bohrer, Anne-Sophie; Lehner, Arnaud; Tran, Daniel; Briand, Joël; Bouteau, François

2009-01-01

In Arabidopsis thaliana cell suspension,abscisic acid (aBa) induces changes in cytosolic calcium concentration ([Ca2+]cyt) which are the trigger for aBa-induced plasma membrane anion current activation, H+-aTPase inhibition, and subsequent plasma membrane depolarization. In the present study, we took advantage of this model to analyze the implication of intracellular Ca2+ stores in aBa signal transduction through electrophysiological current measurements, cytosolic Ca2+ activity measurements with the apoaequorin Ca2+ reporter protein and external pH measurement. Intracellular Ca2+ stores involvement was determined by using specific inhibitors of CICR channels: the cADP-ribose/ryanodine receptor (Br-cADPR and dantrolene) and of the inositol trisphosphate receptor (U73122). In addition experiments were performed on epidermal strips of A. thaliana leaves to monitor stomatal closure in response to ABA in presence of the same pharmacology. Our data provide evidence that ryanodine receptor and inositol trisphosphate receptor could be involved in ABA-induced (1) Ca2+ release in the cytosol, (2) anion channel activation and H+-ATPase inhibition leading to plasma membrane depolarization and (3) stomatal closure. Intracellular Ca2+ release could thus contribute to the control of early events in the ABA signal transduction pathway in A. thaliana. PMID:19847112

Operating manual for the RRL 8 channel data logger

NASA Technical Reports Server (NTRS)

Paluch, E. J.; Shelton, J. D.; Gardner, C. S.

1979-01-01

A data collection device which takes measurements from external sensors at user specified time intervals is described. Three sensor ports are dedicated to temperature, air pressure, and dew point. Five general purpose sensor ports are provided. The user specifies when the measurements are recorded as well as when the information is read or stored in a minicomputer or a paper tape.

Pharmacological Evidence for Calcium Involvement in the Long-Term Processing of Abiotic Stimuli in Plants

PubMed Central

Verdus, Marie-Claire; Le Sceller, Lois; Norris, Victor; Thellier, Michel

2007-01-01

Information about abiotic conditions is stored for long periods in plants and, in flax seedlings, can lead to the production of meristems. To investigate the underlying mechanism, flax seedlings were given abiotic stimuli that included a mechanical stimulus (by manipulation), one or two cold shocks, a slow cold treatment and a drought stress and, if these seedlings were then subjected to a temporary (1 to 3 days) depletion of calcium, epidermal meristems were produced in the seedling hypocotyls. This production was inhibited by the addition to the nutrient media of EGTA, ruthenium red, lanthanum or gadolinium that affect calcium availability or calcium transport. Use of these agents revealed a period of vulnerability in information processing that was less than two min for mechanical stimuli and over five min for other abiotic stimuli, consistent with information about mechanical stimuli being stored particularly fast. We propose that external calcium is needed for the transduction/storage of the information for meristem production whilst a temporary depletion of external calcium is needed for the actual production of meristems. Such roles for calcium would be consistent with a mechanism based on ion condensation on charged polymers. PMID:19516991

Pharmacological evidence for calcium involvement in the long-term processing of abiotic stimuli in plants.

PubMed

Verdus, Marie-Claire; Le Sceller, Lois; Norris, Victor; Thellier, Michel; Ripoll, Camille

2007-07-01

Information about abiotic conditions is stored for long periods in plants and, in flax seedlings, can lead to the production of meristems. To investigate the underlying mechanism, flax seedlings were given abiotic stimuli that included a mechanical stimulus (by manipulation), one or two cold shocks, a slow cold treatment and a drought stress and, if these seedlings were then subjected to a temporary (1 to 3 days) depletion of calcium, epidermal meristems were produced in the seedling hypocotyls. This production was inhibited by the addition to the nutrient media of EGTA, ruthenium red, lanthanum or gadolinium that affect calcium availability or calcium transport. Use of these agents revealed a period of vulnerability in information processing that was less than two min for mechanical stimuli and over five min for other abiotic stimuli, consistent with information about mechanical stimuli being stored particularly fast. We propose that external calcium is needed for the transduction/storage of the information for meristem production whilst a temporary depletion of external calcium is needed for the actual production of meristems. Such roles for calcium would be consistent with a mechanism based on ion condensation on charged polymers.

Considerations for the application of finite element beam modeling to vibration analysis of flight vehicle structures. Ph.D. Thesis - Case Western Reserve Univ.

NASA Technical Reports Server (NTRS)

Kvaternik, R. G.

1976-01-01

The manner of representing a flight vehicle structure as an assembly of beam, spring, and rigid-body components for vibration analysis is described. The development is couched in terms of a substructures methodology which is based on the finite-element stiffness method. The particular manner of employing beam, spring, and rigid-body components to model such items as wing structures, external stores, pylons supporting engines or external stores, and sprung masses associated with launch vehicle fuel slosh is described by means of several simple qualitative examples. A detailed numerical example consisting of a tilt-rotor VTOL aircraft is included to provide a unified illustration of the procedure for representing a structure as an equivalent system of beams, springs, and rigid bodies, the manner of forming the substructure mass and stiffness matrices, and the mechanics of writing the equations of constraint which enforce deflection compatibility at the junctions of the substructures. Since many structures, or selected components of structures, can be represented in this manner for vibration analysis, the modeling concepts described and their application in the numerical example shown should prove generally useful to the dynamicist.

Psychosocial factors influencing the frequency of fast-food consumption among urban and rural Costa Rican adolescents.

PubMed

Monge-Rojas, Rafael; Smith-Castro, Vanessa; Colón-Ramos, Uriyoán; Aragón, M Catalina; Herrera-Raven, Francisco

2013-01-01

The aim of this study was to identify psychosocial factors that influence fast-food consumption in urban and rural Costa Rican adolescents. A self-administered questionnaire designed for the study asked about sociodemographic information, frequency of fast-food consumption, meaning of "fast food," location of purchase, and psychosocial correlates. Five psychosocial factors were extracted by using principal components analysis with Varimax rotation method and eigenvalues. Descriptive statistics and a hierarchical linear regression model were used to predict the frequency of fast-food consumption. Responses from 400 adolescents (ages 12-17 y) reveal that daily consumption of fast food was 1.8 times more frequently mentioned by rural adolescents compared with urban youth. Urban and rural differences were found in the way adolescents classified fast foods (rural adolescents included more traditional foods like chips, sandwiches, and Casado-a dish consisting of rice, black beans, plantains, salad, and a meat), and in purchasing locations (rural adolescents identified neighborhood convenience stores as fast-food restaurants). Living in rural areas, convenience and availability of foods, and the presence of external loci of control were predictors of a higher frequency of fast-food consumption, whereas health awareness predicted a lower frequency. The development of interventions to reduce fast-food consumption in Costa Rican adolescents should consider not only convenience, but also the availability of these foods where adolescents are more exposed, particularly in rural areas. Interventions such as improving the convenience of healthy fast foods available in school canteens and neighborhood stores, policies to increase the price of unhealthy fast food, and activities to provide adolescents with the skills to increase self-efficacy and reduce the effect of external loci of control are recommended. Copyright © 2013 Elsevier Inc. All rights reserved.

Restoring primacy in amnesic free recall: evidence for the recency theory of primacy.

PubMed

Dewar, Michaela; Brown, Gordon D A; Della Sala, Sergio

2011-09-01

Primacy and recency effects at immediate recall are thought to reflect the independent functioning of a long-term memory store (primacy) and a short-term memory store (recency). Key evidence for this theory comes from amnesic patients who show severe long-term memory storage deficits, coupled with profoundly attenuated primacy. Here we challenge this dominant dual-store theory of immediate recall by demonstrating that attenuated primacy in amnesic patients can reflect abnormal working memory rehearsal processes. D.A., a patient with severe amnesia, presented with profoundly attenuated primacy when using her preferred atypical noncumulative rehearsal strategy. In contrast, despite her severe amnesia, she showed normal primacy when her rehearsal was matched with that of controls via an externalized cumulative rehearsal schedule. Our data are in keeping with the "recency theory of primacy" and suggest that primacy at immediate recall is dependent upon medial temporal lobe involvement in cumulative rehearsal rather than long-term memory storage.

Immobilization in Neutral Rotation for a Glenohumeral Dislocation Using a Sling and Splint

PubMed Central

2008-01-01

The purpose of this manuscript is to provide an expedient means of immobilizing a glenohumeral dislocation in neutral rotation. This technique for post-reduction immobilization of a glenohumeral dislocation is inexpensive and easy to fabricate. Anterior glenohumeral dislocations often involve an avulsion of the labrum from the glenoid rim. In contrast to immobilization in internal rotation, positioning the shoulder in 0-45° of external rotation approximates the labrum and glenoid rim. It is hypothesized that placing the shoulder in a more externally rotated position could allow for better healing and increased joint stability. This technique places the shoulder in neutral rotation, because 45° of external rotation is awkward and may interfere with certain activities of daily living. Structural aluminum malleable (SAM) splints are used as an alternative to a bolster sling. The SAM splints are lightweight, simply shaped, and easily stored. PMID:21509136

Injectable microstimulator for functional electrical stimulation.

PubMed

Loeb, G E; Zamin, C J; Schulman, J H; Troyk, P R

1991-11-01

A family of digitally controlled devices is constructed for functional electrical stimulation in which each module is an hermetically sealed glass capsule that is small enough to be injected through the lumen of a hypodermic needle. The overall design and component characteristics of microstimulators that receive power and command signals by inductive coupling from a single, externally worn coil are described. Each device stores power between stimulus pulses by charging an electrolytic capacitor formed by its two electrodes, made of sintered, anodised tantalum and electrochemically activated iridium, respectively. Externally, a highly efficient class E amplifier provides power and digitally encoded command signals to control the amplitude, duration and timing of pulses from up to 256 such microstimulators.

Drainage network optimization for inundation mitigation case study of ITS Surabaya

NASA Astrophysics Data System (ADS)

Savitri, Yang Ratri; Lasminto, Umboro

2017-06-01

Institut Teknologi Sepuluh Nopember (ITS) Surabaya is one of engineering campus in Surabaya with an area of ± 187 ha, which consists of building and campus facilities. The campus is supported by drainage system planned according to the ITS Master Plan on 2002. The drainage system is planned with numbers of retention and detention pond based on the city concept of Zero Delta Q concept. However, in the rainy season, it frequently has inundation problems in several locations. The problems could be identified from two major sources, namely the internal campus facilities and external condition connected with the city drainage system. This paper described the capabilities of drainage network optimization to mitigate local urban drainage problem. The hydrology-hydraulic investigation was done by utilizing the Storm Water Management Model (SWMM) developed by US Environmental Protection Agency (EPA). The mitigation is based on several alternative that based on the existing condition and regarding the social problem. The study results showed that the management of the flow from external source could reduce final stored volume of the campus main channel by 31.75 %.

Recent Transonic Flutter Investigations for Wings and External Stores

DTIC Science & Technology

1983-01-01

and difficult method? In the early days of high-speed air- craft design . the aeroelastician realized that non -compressible aerodynamic theory and... experimental aeroelastic model program that would provide insight into the effects of Reynolds number and angle of attack on various airfoil designs regarding...investigation is carried out both experimentally and analytically. The analytic modelling will be described in a later section. The flutter calculations

Highly Asynchronous VisitOr Queue Graph Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pearce, R.

2012-10-01

HAVOQGT is a C++ framework that can be used to create highly parallel graph traversal algorithms. The framework stores the graph and algorithmic data structures on external memory that is typically mapped to high performance locally attached NAND FLASH arrays. The framework supports a vertex-centered visitor programming model. The frameworkd has been used to implement breadth first search, connected components, and single source shortest path.

External prolonged electrocardiogram monitoring in unexplained syncope and palpitations: results of the SYNARR-Flash study.

PubMed

Locati, E T; Moya, A; Oliveira, M; Tanner, H; Willems, R; Lunati, M; Brignole, M

2016-08-01

SYNARR-Flash study (Monitoring of SYNcopes and/or sustained palpitations of suspected ARRhythmic origin) is an international, multicentre, observational, prospective trial designed to evaluate the role of external 4-week electrocardiogram (ECG) monitoring in clinical work-up of unexplained syncope and/or sustained palpitations of suspected arrhythmic origin. Consecutive patients were enrolled within 1 month after unexplained syncope or palpitations (index event) after being discharged from emergency room or hospitalization without a conclusive diagnosis. A 4-week ECG monitoring was obtained by external high-capacity loop recorder (SpiderFlash-T(®), Sorin) storing patient-activated and auto-triggered tracings. Diagnostic monitorings included (i) conclusive events with reoccurrence of syncope or palpitation with concomitant ECG recording (with/without arrhythmias) and (ii) events with asymptomatic predefined significant arrhythmias (sustained supraventricular or ventricular tachycardia, advanced atrio-ventricular block, sinus bradycardia <30 b.p.m., pauses >6 s). SYNARR-Flash study enrolled 395 patients (57.7% females, 56.9 ± 18.7 years, 28.1% with syncope, and 71.9% with palpitations) from 10 European centres. For syncope, the 4-week diagnostic yield was 24.5%, and predictors of diagnostic events were early start of recording (0-15 vs. >15 days after index event) (OR 6.2, 95% CI 1.3-29.6, P = 0.021) and previous history of supraventricular arrhythmias (OR 3.6, 95% CI 1.4-9.7, P = 0.018). For palpitations, the 4-week diagnostic yield was 71.6% and predictors of diagnostic events were history of recurrent palpitations (P < 0.001) and early start of recording (P = 0.001). The 4-week external ECG monitoring can be considered as first-line tool in the diagnostic work-up of syncope and palpitation. Early recorder use, history of supraventricular arrhythmia, and frequent previous events increased the likelihood of diagnostic events during the 4-week external ECG monitoring. © The Author 2015. Published by Oxford University Press on behalf of the European Society of Cardiology.

Combination of Methoprene and Controlled Aeration to Manage Insects in Stored Wheat.

PubMed

Liu, Samuel S; Arthur, Frank H; VanGundy, Douglas; Phillips, Thomas W

2016-06-17

A commercial formulation of the insect growth regulator methoprene was applied to wheat stored in small bins either alone or in combination with controlled aeration of the bins, to lower grain temperature for insect pest management of stored wheat. Grain temperatures were monitored and modified by a computer-controlled thermocouple system that also activated the aeration system at programmed set-points to move cool ambient air through the grain mass to lower grain temperature. Results from sampling insect populations in experimental storage bins along with laboratory mortality bioassays of insects placed on wheat taken from the bins over the course of the storage period showed that methoprene was very effective in controlling infestation by the externally-feeding stored grain insects Plodia interpunctella (Hübner), the Indian meal moth Tribolium castaneum (Herbst), the red flour beetle, Cryptolestes ferrugineus (Stephens), the rusty grain beetle, and also for the internal-feeding pest Rhyzopertha dominica( Fauvel), the lesser grain borer. Methoprene did not give good control of the internal-feeding pest Sitophilus oryzae (L.), the rice weevil. Aeration alone was somewhat effective in suppressing insect population development, while methoprene alone or when combined with aeration greatly enhanced insect control. Commercial grain grading for industry quality standards at the end of the storage period confirmed the impact of insect suppression on maintaining high quality of the stored wheat. This field experiment shows that methoprene combined with aeration to cool grain can be effective for pest management of stored wheat in the southern plains of the United States of America.

Scanning electron microscopy studies of antennal sensilla of bruchid beetles, Callosobruchus chinensis (L.) and Callosobruchus maculatus (F.) (Coleoptera: Bruchidae).

PubMed

Hu, Fei; Zhang, Guo-Na; Wang, Jin-Jun

2009-04-01

The bruchid beetle, Callosobruchus chinensis (L.) and C. maculatus (F.) (Coleoptera: Bruchidae), are important stored-product insects of stored legume seeds. In this study, the external morphologies of the antennal sensilla on the antennae of both female and male adults of these two species were described using scanning electron microscopy. Antennae of both species are made up of the scape, pedicel, and nine segments of flagellomeres. Antennae of female and male C. maculatus and female of C. chinensis are serrate in shape, while those of male C. chinensis are pectinate. Eight morphological sensilla types were recorded in both sexes, including Böhm bristles (BB), two types of sensilla trichoid (ST1, ST2), sensilla chaetica (SC), two types of sensilla basiconic (SB1, SB2), grooved pegs (GP), and sensilla cavity (SCa). The number of ST1 and SB1 of the male were significantly greater than those of the female of C. chinensis, and the number of ST2 and SB1 of the male were significantly more abundant than those of the female of C. maculatus. The possible functions of the above sensilla types are discussed in light of previously published literature.

Self-correcting quantum memory with a boundary

NASA Astrophysics Data System (ADS)

Hutter, Adrian; Wootton, James R.; Röthlisberger, Beat; Loss, Daniel

2012-11-01

We study the two-dimensional toric-code Hamiltonian with effective long-range interactions between its anyonic excitations induced by coupling the toric code to external fields. It has been shown that such interactions allow an arbitrary increase in the lifetime of the stored quantum information by making L, the linear size of the memory, larger [Chesi , Phys. Rev. APLRAAN1050-294710.1103/PhysRevA.82.022305 82, 022305 (2010)]. We show that for these systems the choice of boundary conditions (open boundaries as opposed to periodic boundary conditions) is not a mere technicality; the influence of anyons produced at the boundaries becomes in fact dominant for large enough L. This influence can be either beneficial or detrimental. In particular, we study an effective Hamiltonian proposed by Pedrocchi [Phys. Rev. BPRBMDO1098-012110.1103/PhysRevB.83.115415 83, 115415 (2011)] that describes repulsion between anyons and anyon holes. For this system, we find a lifetime of the stored quantum information that grows exponentially in L2 for both periodic and open boundary conditions, although the exponent in the latter case is found to be less favorable. However, L is upper bounded through the breakdown of the perturbative treatment of the underlying Hamiltonian.

Improvement of the Prediction of Drugs Demand Using Spatial Data Mining Tools.

PubMed

Ramos, M Isabel; Cubillas, Juan José; Feito, Francisco R

2016-01-01

The continued availability of products at any store is the major issue in order to provide good customer service. If the store is a drugstore this matter reaches a greater importance, as out of stock of a drug when there is high demand causes problems and tensions in the healthcare system. There are numerous studies of the impact this issue has on patients. The lack of any drug in a pharmacy in certain seasons is very common, especially when some external factors proliferate favoring the occurrence of certain diseases. This study focuses on a particular drug consumed in the city of Jaen, southern Andalucia, Spain. Our goal is to determine in advance the Salbutamol demand. Advanced data mining techniques have been used with spatial variables. These last have a key role to generate an effective model. In this research we have used the attributes that are associated with Salbutamol demand and it has been generated a very accurate prediction model of 5.78% of mean absolute error. This is a very encouraging data considering that the consumption of this drug in Jaen varies 500% from one period to another.

Temperature management during semen processing: Impact on boar sperm quality under laboratory and field conditions.

PubMed

Schulze, M; Henning, H; Rüdiger, K; Wallner, U; Waberski, D

2013-12-01

Freshly collected boar spermatozoa are sensitive to a fast reduction in temperature because of lipid phase transition and phase separation processes. Temperature management during semen processing may determine the quality of stored samples. The aim of this study was to evaluate the influence of isothermic and hypothermic semen processing protocols on boar sperm quality under laboratory and field conditions. In the laboratory study, ejaculates (n = 12) were first diluted (1:1) with Beltsville Thawing Solution (BTS) at 32 °C, then processed either with isothermic (32 °C) or hypothermic (21 °C) BTS, stored at 17 °C, and assessed on days 1, 3, and 6. Temperature curves showed that 150 minutes after the first dilution, semen doses of both groups reached the same temperature. Two-step hypothermic processing resulted in lower sperm motility on days 1 and 6 (P < 0.05). Concomitantly, hypothermally processed samples contained less membrane intact sperm on days 3 and 6 (P < 0.05). Using AndroStar Plus extender instead of BTS reduced the negative effect of hypothermic processing. In the field study, 15 semen samples from each of 23 European artificial insemination studs were evaluated as part of an external quality control program. Semen quality based on motility, membrane integrity, mitochondrial activity, and a thermoresistance test was higher for stations using one-step isothermic dilutions (n = 7) compared with artificial insemination centers using two-step hypothermic protocols (n = 16). Both studies show that chilling injury associated with hypothermic dilution results in lower quality of stored boar semen compared with isothermic dilution and that the type of semen extender affects the outcomes. Copyright © 2013 Elsevier Inc. All rights reserved.

Temporal Organization of Sound Information in Auditory Memory.

PubMed

Song, Kun; Luo, Huan

2017-01-01

Memory is a constructive and organizational process. Instead of being stored with all the fine details, external information is reorganized and structured at certain spatiotemporal scales. It is well acknowledged that time plays a central role in audition by segmenting sound inputs into temporal chunks of appropriate length. However, it remains largely unknown whether critical temporal structures exist to mediate sound representation in auditory memory. To address the issue, here we designed an auditory memory transferring study, by combining a previously developed unsupervised white noise memory paradigm with a reversed sound manipulation method. Specifically, we systematically measured the memory transferring from a random white noise sound to its locally temporal reversed version on various temporal scales in seven experiments. We demonstrate a U-shape memory-transferring pattern with the minimum value around temporal scale of 200 ms. Furthermore, neither auditory perceptual similarity nor physical similarity as a function of the manipulating temporal scale can account for the memory-transferring results. Our results suggest that sounds are not stored with all the fine spectrotemporal details but are organized and structured at discrete temporal chunks in long-term auditory memory representation.

External Verification of SCADA System Embedded Controller Firmware

DTIC Science & Technology

2012-03-01

microprocessor and read-only memory (ROM) or flash memory for storing firmware and control logic [5],[8]. A PLC typically has three software levels as shown in...implementing different firmware. Because PLCs are in effect a microprocessor device, an analysis of the current research on embedded devices is important...Electronics Engineers (IEEE) published a 15 best practices guide for firmware control on microprocessors [44]. IEEE suggests that microprocessors

Fabric-based integrated energy devices for wearable activity monitors.

PubMed

Jung, Sungmook; Lee, Jongsu; Hyeon, Taeghwan; Lee, Minbaek; Kim, Dae-Hyeong

2014-09-01

A wearable fabric-based integrated power-supply system that generates energy triboelectrically using human activity and stores the generated energy in an integrated supercapacitor is developed. This system can be utilized as either a self-powered activity monitor or as a power supply for external wearable sensors. These demonstrations give new insights for the research of wearable electronics. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Thermal management system and method for a solid-state energy storing device

DOEpatents

Rouillard, Roger; Domroese, Michael K.; Gauthier, Michel; Hoffman, Joseph A.; Lindeman, David D.; Noel, Joseph-Robert-Gaetan; Radewald, Vern E.; Ranger, Michel; Rouillard, Jean; Shiota, Toshimi; St-Germain, Philippe; Sudano, Anthony; Trice, Jennifer L.; Turgeon, Thomas A.

2000-01-01

An improved electrochemical energy storing device includes a number of thin-film electrochemical cells which are maintained in a state of compression through use of an internal or an external pressure apparatus. A thermal conductor, which is connected to at least one of the positive or negative contacts of each electrochemical cell, conducts current into and out of the electrochemical cells and also conducts thermal energy between the electrochemical cells and thermally conductive material disposed on a wall structure adjacent the conductors. The wall structure includes electrically resistive material, such as an anodized coating or a thin film of plastic. The thermal conductors are fabricated to include a spring mechanism which expands and contacts to maintain mechanical contact between the electrochemical cells and the thermally conductive material in the presence of relative movement between the electrochemical cells and the wall structure. An active cooling apparatus may be employed external to a hermetically sealed housing containing the electrochemical cells to enhance the transfer of thermal energy into and out of the electrochemical cells. An integrated interconnect board may be disposed within the housing onto which a number of electrical and electro-mechanical components are mounted. Heat generated by the components is conducted from the interconnect board to the housing using the thermal conductors.

A New Evaluation Method of Stored Heat Effect of Reinforced Concrete Wall of Cold Storage

NASA Astrophysics Data System (ADS)

Nomura, Tomohiro; Murakami, Yuji; Uchikawa, Motoyuki

Today it has become imperative to save energy by operating a refrigerator in a cold storage executed by external insulate reinforced concrete wall intermittently. The theme of the paper is to get the evaluation method to be capable of calculating, numerically, interval time for stopping the refrigerator, in applying reinforced concrete wall as source of stored heat. The experiments with the concrete models were performed in order to examine the time variation of internal temperature after refrigerator stopped. In addition, the simulation method with three dimensional unsteady FEM for personal-computer type was introduced for easily analyzing the internal temperature variation. Using this method, it is possible to obtain the time variation of internal temperature and to calculate the interval time for stopping the refrigerator.

Ground states of partially connected binary neural networks

NASA Technical Reports Server (NTRS)

Baram, Yoram

1990-01-01

Neural networks defined by outer products of vectors over (-1, 0, 1) are considered. Patterns over (-1, 0, 1) define by their outer products partially connected neural networks consisting of internally strongly connected, externally weakly connected subnetworks. Subpatterns over (-1, 1) define subnetworks, and their combinations that agree in the common bits define permissible words. It is shown that the permissible words are locally stable states of the network, provided that each of the subnetworks stores mutually orthogonal subwords, or, at most, two subwords. It is also shown that when each of the subnetworks stores two mutually orthogonal binary subwords at most, the permissible words, defined as the combinations of the subwords (one corresponding to each subnetwork), that agree in their common bits are the unique ground states of the associated energy function.

TSR: A storage and cooling ring for HIE-ISOLDE

NASA Astrophysics Data System (ADS)

Butler, P. A.; Blaum, K.; Davinson, T.; Flanagan, K.; Freeman, S. J.; Grieser, M.; Lazarus, I. H.; Litvinov, Yu. A.; Lotay, G.; Page, R. D.; Raabe, R.; Siesling, E.; Wenander, F.; Woods, P. J.

2016-06-01

It is planned to install the heavy-ion, low-energy ring TSR, currently at the Max-Planck-Institute for Nuclear Physics in Heidelberg, at the HIE-ISOLDE facility in CERN, Geneva. Such a facility will provide a capability for experiments with stored, cooled secondary beams that is rich and varied, spanning from studies of nuclear ground-state properties and reaction studies of astrophysical relevance, to investigations with highly-charged ions and pure isomeric beams. In addition to experiments performed using beams recirculating within the ring, the cooled beams can be extracted and exploited by external spectrometers for high-precision measurements. The capabilities of the ring facility as well as some physics cases will be presented, together with a brief report on the status of the project.

Adaptive momentum management for large space structures

NASA Technical Reports Server (NTRS)

Hahn, E.

1987-01-01

Momentum management is discussed for a Large Space Structure (LSS) with the structure selected configuration being the Initial Orbital Configuration (IOC) of the dual keel space station. The external forces considered were gravity gradient and aerodynamic torques. The goal of the momentum management scheme developed is to remove the bias components of the external torques and center the cyclic components of the stored angular momentum. The scheme investigated is adaptive to uncertainties of the inertia tensor and requires only approximate knowledge of principle moments of inertia. Computational requirements are minimal and should present no implementation problem in a flight type computer and the method proposed is shown to be effective in the presence of attitude control bandwidths as low as .01 radian/sec.

Adaptive momentum management for the dual keel Space Station

NASA Technical Reports Server (NTRS)

Hopkins, M.; Hahn, E.

1987-01-01

The report discusses momentum management for a large space structure with the structure selected configuration being the Initial Orbital Configuration of the dual-keel Space Station. The external torques considered were gravity gradient and aerodynamic torques. The goal of the momentum management scheme developed is to remove the bias components of the external torques and center the cyclic components of the stored angular momentum. The scheme investigated is adaptive to uncertainties of the inertia tensor and requires only approximate knowledge of principal moments of inertia. Computational requirements are minimal and should present no implementation problem in a flight-type computer. The method proposed is shown to be effective in the presence of attitude control bandwidths as low as 0.01 radian/sec.

The Rise and Need for Mobile Apps for Maternal and Child Health Care in China: Survey Based on App Markets.

PubMed

Zhang, Puhong; Dong, Le; Chen, Huan; Chai, Yanling; Liu, Jianbo

2018-06-08

Mobile health services are thriving in the field of maternal and child health in China due to expansions in the field of electronic health and the introduction of the two-child policy. There are numerous maternal and child health apps in computer stores, but the exact number of apps, number of downloads, and features of these apps is not known. This study aimed to explore the use of maternal and child health apps in Android and iOS app stores and to describe the key functional features of the most popular apps, with the purpose of providing insight into further research and development of maternal and child health mobile health products. The researchers conducted a search in the 3 most popular Android app stores (Tencent MyApp, Baidu Mobile Assistant, and 360 Mobile Assistant) and the iTunes App Store in China. All apps regarding family planning (contraception and preparing for pregnancy), pregnancy and perinatal care, neonatal care and health, and development for children under 6 years were included in the initial analysis. Maternal and child health mobile apps with predominant features of product marketing, children's songs, animation, or games were excluded from the study. The 50 most frequently used apps in each of the Android stores as well as the iTunes store (a total of 78 deduplicated apps) were selected and downloaded for an in-depth analysis. A total of 5276 Android apps and 877 iOS apps developed for maternal and child health care were identified. Of the 78 most frequently used apps, 43 (55%) apps focused on one stage of MCH care, mainly targeting child care (25 apps) and before pregnancy care (11 apps), whereas 35 (45%) of the apps covered 2 or more stages, most of which (32 apps) included both pregnancy and child care services. The app features that were commonly adopted by the popular apps were health education, communication, health status self-monitoring, a diary, reminders, and counseling. Within the app feature of "health status self-monitoring," the researchers found 47 specific tools supporting activities such as pregnancy preparation, fetal heart monitoring, blood glucose and blood pressure monitoring, and doctor visits. A few apps were equipped with external devices (n=3) or sensors. No app with intelligent decision-support features to support disease management for conditions such as gestational diabetes and pregnancy-induced hypertension was found. A small number of apps (n=5) had a Web connection with hospital information systems to support appointment making, payments, hospital service guidance, or checking of laboratory results. There are thousands of maternal and child health apps in the Chinese market. Child care, pregnancy, and before pregnancy were the mostly covered maternal and child health stages, in that order. Various app features and tools were adopted by maternal and child health apps, but the use of internal or external sensors, intelligent decision support, and tethering with existing hospital information systems was rare and these features need more research and development. ©Puhong Zhang, Le Dong, Huan Chen, Yanling Chai, Jianbo Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 08.06.2018.

Effect of ion concentration, solution and membrane permittivity on electric energy storage and capacitance.

PubMed

Tajparast, Mohammad; Glavinović, Mladen I

2018-06-06

Bio-membranes as capacitors store electric energy, but their permittivity is low whereas the permittivity of surrounding solution is high. To evaluate the effective capacitance of the membrane/solution system and determine the electric energy stored within the membrane and in the solution, we estimated their electric variables using Poisson-Nernst-Planck simulations. We calculated membrane and solution capacitances from stored electric energy. The effective capacitance was calculated by fitting a six-capacitance model to charges (fixed and ion) and associated potentials, because it cannot be considered as a result of membrane and solution capacitance in series. The electric energy stored within the membrane (typically much smaller than that in the solution), depends on the membrane permittivity, but also on the external electric field, surface charge density, water permittivity and ion concentration. The effect on capacitances is more specific. Solution capacitance rises with greater solution permittivity or ion concentration, but the membrane capacitance (much smaller than solution capacitance) is only influenced by its permittivity. Interestingly, the effective capacitance is independent of membrane or solution permittivity, but rises as the ion concentration increases and surface charge becomes positive. Experimental estimates of membrane capacitance are thus not necessarily a reliable index of its surface area. Copyright © 2018. Published by Elsevier B.V.

Improvement in the statistical operation of a Blumlein pulse forming line in bipolar pulse mode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pushkarev, A. I., E-mail: aipush@mail.ru; Isakova, Y. I.; Khaylov, I. P.

The paper presents the results of studies on shot-to-shot performance of a water Blumlein pulse forming line of 1–1.2 kJ of stored energy. The experiments were carried using the TEMP-4M pulsed ion beam accelerator during its operation in both unipolar pulse mode (150 ns, 250–300 kV) and bipolar-pulse mode with the first negative (300–600 ns, 100–150 kV) followed by a second positive (120 ns, 250–300 kV) pulse. The analysis was carried out for two cases when the Blumlein was terminated with a resistive load and with a self-magnetically insulated ion diode. It was found that in bipolar pulse mode themore » shot-to-shot variation in breakdown voltage of a preliminary spark gap is small, the standard deviation (1σ) does not exceed 2%. At the same time, the shot-to-shot variation in the breakdown voltage of the main spark gap in both bipolar-pulse and unipolar pulse mode is 3–4 times higher than that for the preliminary spark gap. To improve the statistical performance of the main spark gap we changed the regime of its operation from a self-triggered mode to an externally triggered mode. In the new arrangement the first voltage pulse at the output of Blumlein was used to trigger the main spark gap. The new trigatron-type regime of the main spark gap operation showed a good stability of breakdown voltage and thus allowed to stabilize the duration of the first pulse. The standard deviation of the breakdown voltage and duration of the first pulse did not exceed 2% for a set of 50 pulses. The externally triggered mode of the main gap operation also allowed for a decrease in the charging voltage of the Blumlein to a 0.9–0.95 of self-breakdown voltage of the main spark gap while the energy stored in Marx generator was decreased from 4 kJ to 2.5 kJ. At the same time the energy stored in Blumlein remained the same.« less

Effect of carbon source type on intracellular stored polymers during endogenous denitritation (ED) treating landfill leachate.

PubMed

Miao, Lei; Wang, Shuying; Li, Baikun; Cao, Tianhao; Zhang, Fangzhai; Wang, Zhong; Peng, Yongzhen

2016-09-01

Glycogen accumulating organisms (GAOs) capable of storing organic compounds as polyhydroxyalkanoate (PHA) have been used for endogenous denitritation (ED), but the effect of carbon sources type on nitrogen removal performance of GAOs treating landfill leachate is unclear. In this study, a successful ED system treating landfill leachate (COD/NH4(+)-N (C/N): 4) without external carbon source addition was applied. The mature leachate with C/N of 1 was used as the feeding base solution, with acetate, propionate, and glucose examined as the carbon sources, and their effects on yields and compositions of PHA produced by GAOs were determined and associated with nitrogen removal performance. In the case of sole carbon source, acetate was much easier to be stored than propionate and glucose, which led to a higher nitrogen removal efficiency. Glucose had the lowest amount of PHA storage and led to the lowest performance. In the case of composite carbon sources (two scenarios: acetate + propionate; acetate + propionate + glucose), GAOs stored sufficient PHA and exhibited similar nitrogen removal efficiencies. Moreover, type of carbon source influenced the compositions of PHA. The polyhydroxybutyrate (PHB) fraction in PHA was far more than polyhydroxyvalerate (PHV) in all tests. PHV was synthesized only when acetate existed in carbon source. The microbial diversity analysis revealed that Proteobacteria was the most abundant phylum. Among the 108 genera detected in this ED system, the genera responsible for denitritation were Thauera, Paracoccus, Ottowia and Comamonadaceae_unclassified, accounting for 46.21% of total bacteria. Especially, Paracoccus and Comamonadaceae_unclassified transformed the carbon source into PHA for denitritation, and carried out endogenous denitritation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Tree water storage and its diurnal dynamics related to sap flow and changes in stem volume in old-growth Douglas-fir trees.

PubMed

Cermák, Jan; Kucera, Jiri; Bauerle, William L; Phillips, Nathan; Hinckley, Thomas M

2007-02-01

Diurnal and seasonal tree water storage was studied in three large Douglas-fir (Pseudotsuga menziesii [Mirb.] Franco) trees at the Wind River Canopy Crane Research site. Changes in water storage were based on measurements of sap flow and changes in stem volume and tissue water content at different heights in the stem and branches. We measured sap flow by two variants of the heat balance method (with internal heating in stems and external heating in branches), stem volume with electronic dendrometers, and tissue water content gravimetrically. Water storage was calculated from the differences in diurnal courses of sap flow at different heights and their integration. Old-growth Douglas-fir trees contained large amounts of free water: stem sapwood was the most important storage site, followed by stem phloem, branch sapwood, branch phloem and needles. There were significant time shifts (minutes to hours) between sap flow measured at different positions within the transport system (i.e., stem base to shoot tip), suggesting a highly elastic transport system. On selected fine days between late July and early October, when daily transpiration ranged from 150 to 300 liters, the quantity of stored water used daily ranged from 25 to 55 liters, i.e., about 20% of daily total sap flow. The greatest amount of this stored water came from the lower stem; however, proportionally more water was removed from the upper parts of the tree relative to their water storage capacity. In addition to lags in sap flow from one point in the hydrolic pathway to another, the withdrawal and replacement of stored water was reflected in changes in stem volume. When point-to-point lags in sap flow (minutes to hours near the top and stem base, respectively) were considered, there was a strong linear relationship between stem volume changes and transpiration. Volume changes of the whole tree were small (equivalent to 14% of the total daily use of stored water) indicating that most stored water came from the stem and from its inelastic (sapwood) tissues. Whole tree transpiration can be maintained with stored water for about a week, but it can be maintained with stored water from the upper crown alone for no more than a few hours.

PROTICdb: a web-based application to store, track, query, and compare plant proteome data.

PubMed

Ferry-Dumazet, Hélène; Houel, Gwenn; Montalent, Pierre; Moreau, Luc; Langella, Olivier; Negroni, Luc; Vincent, Delphine; Lalanne, Céline; de Daruvar, Antoine; Plomion, Christophe; Zivy, Michel; Joets, Johann

2005-05-01

PROTICdb is a web-based application, mainly designed to store and analyze plant proteome data obtained by two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) and mass spectrometry (MS). The purposes of PROTICdb are (i) to store, track, and query information related to proteomic experiments, i.e., from tissue sampling to protein identification and quantitative measurements, and (ii) to integrate information from the user's own expertise and other sources into a knowledge base, used to support data interpretation (e.g., for the determination of allelic variants or products of post-translational modifications). Data insertion into the relational database of PROTICdb is achieved either by uploading outputs of image analysis and MS identification software, or by filling web forms. 2-D PAGE annotated maps can be displayed, queried, and compared through a graphical interface. Links to external databases are also available. Quantitative data can be easily exported in a tabulated format for statistical analyses. PROTICdb is based on the Oracle or the PostgreSQL Database Management System and is freely available upon request at the following URL: http://moulon.inra.fr/ bioinfo/PROTICdb.

Simple, robust storage of drops and fluids in a microfluidic device.

PubMed

Boukellal, Hakim; Selimović, Seila; Jia, Yanwei; Cristobal, Galder; Fraden, Seth

2009-01-21

We describe a single microfluidic device and two methods for the passive storage of aqueous drops in a continuous stream of oil without any external control but hydrodynamic flow. Advantages of this device are that it is simple to manufacture, robust under operation, and drops never come into contact with each other, making it unnecessary to stabilize drops against coalescence. In one method the device can be used to store drops that are created upstream from the storage zone. In the second method the same device can be used to simultaneously create and store drops from a single large continuous fluid stream without resorting to the usual flow focusing or T-junction drop generation processes. Additionally, this device stores all the fluid introduced, including the first amount, with zero waste. Transport of drops in this device depends, however, on whether or not the aqueous drops wet the device walls. Analysis of drop transport in these two cases is presented. Finally, a method for extraction of the drops from the device is also presented, which works best when drops do not wet the walls of the chip.

Improvement of a Privacy Authentication Scheme Based on Cloud for Medical Environment.

PubMed

Chiou, Shin-Yan; Ying, Zhaoqin; Liu, Junqiang

2016-04-01

Medical systems allow patients to receive care at different hospitals. However, this entails considerable inconvenience through the need to transport patients and their medical records between hospitals. The development of Telecare Medicine Information Systems (TMIS) makes it easier for patients to seek medical treatment and to store and access medical records. However, medical data stored in TMIS is not encrypted, leaving patients' private data vulnerable to external leaks. In 2014, scholars proposed a new cloud-based medical information model and authentication scheme which would not only allow patients to remotely access medical services but also protects patient privacy. However, this scheme still fails to provide patient anonymity and message authentication. Furthermore, this scheme only stores patient medical data, without allowing patients to directly access medical advice. Therefore, we propose a new authentication scheme, which provides anonymity, unlinkability, and message authentication, and allows patients to directly and remotely consult with doctors. In addition, our proposed scheme is more efficient in terms of computation cost. The proposed system was implemented in Android system to demonstrate its workability.

Markovian robots: Minimal navigation strategies for active particles

NASA Astrophysics Data System (ADS)

Nava, Luis Gómez; Großmann, Robert; Peruani, Fernando

2018-04-01

We explore minimal navigation strategies for active particles in complex, dynamical, external fields, introducing a class of autonomous, self-propelled particles which we call Markovian robots (MR). These machines are equipped with a navigation control system (NCS) that triggers random changes in the direction of self-propulsion of the robots. The internal state of the NCS is described by a Boolean variable that adopts two values. The temporal dynamics of this Boolean variable is dictated by a closed Markov chain—ensuring the absence of fixed points in the dynamics—with transition rates that may depend exclusively on the instantaneous, local value of the external field. Importantly, the NCS does not store past measurements of this value in continuous, internal variables. We show that despite the strong constraints, it is possible to conceive closed Markov chain motifs that lead to nontrivial motility behaviors of the MR in one, two, and three dimensions. By analytically reducing the complexity of the NCS dynamics, we obtain an effective description of the long-time motility behavior of the MR that allows us to identify the minimum requirements in the design of NCS motifs and transition rates to perform complex navigation tasks such as adaptive gradient following, detection of minima or maxima, or selection of a desired value in a dynamical, external field. We put these ideas in practice by assembling a robot that operates by the proposed minimalistic NCS to evaluate the robustness of MR, providing a proof of concept that is possible to navigate through complex information landscapes with such a simple NCS whose internal state can be stored in one bit. These ideas may prove useful for the engineering of miniaturized robots.

The Design and Usage of the New Data Management Features in NASTRAN

NASA Technical Reports Server (NTRS)

Pamidi, P. R.; Brown, W. K.

1984-01-01

Two new data management features are installed in the April 1984 release of NASTRAN. These two features are the Rigid Format Data Base and the READFILE capability. The Rigid Format Data Base is stored on external files in card image format and can be easily maintained and expanded by the use of standard text editors. This data base provides the user and the NASTRAN maintenance contractor with an easy means for making changes to a Rigid Format or for generating new Rigid Formats without unnecessary compilations and link editing of NASTRAN. Each Rigid Format entry in the data base contains the Direct Matrix Abstraction Program (DMAP), along with the associated restart, DMAP sequence subset and substructure control flags. The READFILE capability allows an user to reference an external secondary file from the NASTRAN primary input file and to read data from this secondary file. There is no limit to the number of external secondary files that may be referenced and read.

Changes in tobacco industry advertising around high schools in Greece following an outdoor advertising ban: a follow-up study.

PubMed

Vardavas, Constantine I; Girvalaki, Charis; Lazuras, Lambros; Triantafylli, Danai; Lionis, Christos; Connolly, Gregory N; Behrakis, Panagiotis

2013-09-01

As tobacco advertising bans are enacted in accordance with the Framework Convention on Tobacco Control, it is essential to assess enforcement and how the industry may circumvent such measures. During this longitudinal study, we compared the characteristics of points-of-sale (POS) advertising within 300 m of all high schools in Heraklion, Greece before (n=101 POS and 44 billboards in 2007) and after (n=106 POS in 2011) an outdoor advertising ban was implemented in 2009. Cigarette advertisements in all retailers near all high schools were assessed. Following the ban, tobacco industry billboards around schools were eradicated (from 44 to 0). The proportion of POS that had external advertisements dropped from 98% to 66% (p<0.001), more so in regulated convenience stores (from 97% to 35%, p<0.001) than in kiosks (98% to 92%, p=0.192), which were exempt from the ban. The proportion of convenience stores that had advertisements on the door (79.5% to 20.4%, p<0.001), ads that could be seen from the street (92.3% to 22.4%, p<0.001) or illuminated exterior ads (46.2% to 10.2%, p<0.001) was also significantly reduced. Overall, the average number of exterior advertisements per POS fell from 7.4 to 3.9 (p<0.05). This reduction was noted in regulated convenience stores (4.8±3.0 vs 0.9±2.1, p<0.001) and in unregulated kiosks (9.0±6.7 vs 6.5±4.5, p=0.019). The outdoor advertising restriction in Greece has led to a reduced number of tobacco advertisements per POS, and the eradication of billboard advertising. Nevertheless, there is a need to regulate kiosks, which were identified as a key vector for tobacco advertising, and to increase compliance among regulated convenience stores.

Refrigerated storage of platelets initiates changes in platelet surface marker expression and localization of intracellular proteins.

PubMed

Wood, Ben; Padula, Matthew P; Marks, Denese C; Johnson, Lacey

2016-10-01

Platelets (PLTs) are currently stored at room temperature (22°C), which limits their shelf life, primarily due to the risk of bacterial growth. Alternatives to room temperature storage include PLT refrigeration (2-6°C), which inhibits bacterial growth, thus potentially allowing an extension of shelf life. Additionally, refrigerated PLTs appear more hemostatically active than conventional PLTs, which may be beneficial in certain clinical situations. However, the mechanisms responsible for this hemostatic function are not well characterized. The aim of this study was to assess the protein profile of refrigerated PLTs in an effort to understand these functional consequences. Buffy coat PLTs were pooled, split, and stored either at room temperature (20-24°C) or under refrigerated (2-6°C) conditions (n = 8 in each group). PLTs were assessed for changes in external receptor expression and actin filamentation using flow cytometry. Intracellular proteomic changes were assessed using two-dimensional gel electrophoresis and Western blotting. PLT refrigeration significantly reduced the abundance of glycoproteins (GPIb, GPIX, GPIIb, and GPIV) on the external membrane. However, refrigeration resulted in the increased expression of high-affinity integrins (αIIbβ3 and β1) and activation and apoptosis markers (CD62P, CD63, and phosphatidylserine). PLT refrigeration substantially altered the abundance and localization of several cytoskeletal proteins and resulted in an increase in actin filamentation, as measured by phalloidin staining. Refrigerated storage of PLTs induces significant changes in the expression and localization of both surface-expressed and intracellular proteins. Understanding these proteomic changes may help to identify the mechanisms resulting in the refrigeration-associated alterations in PLT function and clearance. © 2016 AABB.

[Leonardo da Vinci and his studies on the human fetus and the placenta].

PubMed

Cataldi, L; Fanos, V

2000-01-01

To review the accuracy of Leonardo's anatomical studies of the female external genitalia and the foetus, particularly those concerning the umbilical cord with its blood vessels. The anatomical drawings of Leonardo da Vinci which are now stored in the Windors Castle near London were reviewed and the accuracy of the details of the genital apparatus and foetus was evaluated. A written comment characterizes many of his drawings. He described accurately the position of the uterine blood vessels and the relationship between the pelvic organs. However his drawing and description of the female external genitalia and human placenta was incorrect because his understanding of it was inadequate. He believed that the human placenta had cotyledons like that of the ungulate uterus (drown side A of sheet 19). At the top of that sheet some Leonardo's details of the anatomic relationship are shown. In our opinion, Leonardo's misunderstanding is probably because he was only able to perform one anatomical dissection of a pregnant women and foetus and therefore his knowledge was limited. The resulting documentation of the pregnant women and foetus was therefore heavily supplemented with his enormous experience in animal anatomy.

A study of wound repair in Dictyostelium cells by using novel laserporation.

PubMed

Pervin, Mst Shaela; Itoh, Go; Talukder, Md Shahabe Uddin; Fujimoto, Koushiro; Morimoto, Yusuke V; Tanaka, Masamitsu; Ueda, Masahiro; Yumura, Shigehiko

2018-05-22

We examined the mechanism of cell membrane repair in Dictyostelium cells by using a novel laser-based cell poration method. The dynamics of wound pores opening and closing were characterized by live imaging of fluorescent cell membrane proteins, influx of fluorescent dye, and Ca 2+ imaging. The wound closed within 2-4 sec, depending on the wound size. Cells could tolerate a wound size of less than 2.0 µm. In the absence of Ca 2+ in the external medium, the wound pore did not close and cells ruptured. The release of Ca 2+ from intracellular stores also contributed to the elevation of cytoplasmic Ca 2+ but not to wound repair. Annexin C1 immediately accumulated at the wound site depending on the external Ca 2+ concentration, and annexin C1 knockout cells had a defect in wound repair, but it was not essential. Dictyostelium cells were able to respond to multiple repeated wounds with the same time courses, in contrast to previous reports showing that the first wound accelerates the second wound repair in fibroblasts.

KSC-2010-1075

NASA Image and Video Library

2010-01-07

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians study the results of a push test performed on an external tank door on space shuttle Atlantis. Two umbilical doors, located on the shuttle's aft fuselage, close after external tank separation following launch. The test confirms that the door's actuators are functioning properly and that signals sent from the actuators correctly indicate that the doors have closed, creating the necessary thermal barrier for reentry. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14, 2010. Photo credit: NASA/Troy Cryder

Synaptic behaviors of a single metal-oxide-metal resistive device

NASA Astrophysics Data System (ADS)

Choi, Sang-Jun; Kim, Guk-Bae; Lee, Kyoobin; Kim, Ki-Hong; Yang, Woo-Young; Cho, Soohaeng; Bae, Hyung-Jin; Seo, Dong-Seok; Kim, Sang-Il; Lee, Kyung-Jin

2011-03-01

The mammalian brain is far superior to today's electronic circuits in intelligence and efficiency. Its functions are realized by the network of neurons connected via synapses. Much effort has been extended in finding satisfactory electronic neural networks that act like brains, i.e., especially the electronic version of synapse that is capable of the weight control and is independent of the external data storage. We demonstrate experimentally that a single metal-oxide-metal structure successfully stores the biological synaptic weight variations (synaptic plasticity) without any external storage node or circuit. Our device also demonstrates the reliability of plasticity experimentally with the model considering the time dependence of spikes. All these properties are embodied by the change of resistance level corresponding to the history of injected voltage-pulse signals. Moreover, we prove the capability of second-order learning of the multi-resistive device by applying it to the circuit composed of transistors. We anticipate our demonstration will invigorate the study of electronic neural networks using non-volatile multi-resistive device, which is simpler and superior compared to other storage devices.

Self-healing liquid/solid state battery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burke, Paul J.; Chung, Brice H.V.; Phadke, Satyajit R.

A battery system that exchanges energy with an external device is provided. The battery system includes a positive electrode having a first metal or alloy, a negative electrode having a second metal or alloy, and an electrolyte including a salt of the second metal or alloy. The positive electrode, the negative electrode, and the electrolyte are in a liquid phase at an operating temperature during at least one portion of operation. The positive electrode is entirely in a liquid phase in one charged state and includes a solid phase in another charged state. The solid phase of the positive electrodemore » includes a solid intermetallic formed by the first and the second metals or alloys. Methods of storing electrical energy from an external circuit using such a battery system are also provided.« less

cPath: open source software for collecting, storing, and querying biological pathways.

PubMed

Cerami, Ethan G; Bader, Gary D; Gross, Benjamin E; Sander, Chris

2006-11-13

Biological pathways, including metabolic pathways, protein interaction networks, signal transduction pathways, and gene regulatory networks, are currently represented in over 220 diverse databases. These data are crucial for the study of specific biological processes, including human diseases. Standard exchange formats for pathway information, such as BioPAX, CellML, SBML and PSI-MI, enable convenient collection of this data for biological research, but mechanisms for common storage and communication are required. We have developed cPath, an open source database and web application for collecting, storing, and querying biological pathway data. cPath makes it easy to aggregate custom pathway data sets available in standard exchange formats from multiple databases, present pathway data to biologists via a customizable web interface, and export pathway data via a web service to third-party software, such as Cytoscape, for visualization and analysis. cPath is software only, and does not include new pathway information. Key features include: a built-in identifier mapping service for linking identical interactors and linking to external resources; built-in support for PSI-MI and BioPAX standard pathway exchange formats; a web service interface for searching and retrieving pathway data sets; and thorough documentation. The cPath software is freely available under the LGPL open source license for academic and commercial use. cPath is a robust, scalable, modular, professional-grade software platform for collecting, storing, and querying biological pathways. It can serve as the core data handling component in information systems for pathway visualization, analysis and modeling.

Skin Barrier and Calcium.

PubMed

Lee, Sang Eun; Lee, Seung Hun

2018-06-01

Epidermal barrier formation and the maintenance of barrier homeostasis are essential to protect us from the external environments and organisms. Moreover, impaired keratinocytes differentiation and dysfunctional skin barrier can be the primary causes or aggravating factors for many inflammatory skin diseases including atopic dermatitis and psoriasis. Therefore, understanding the regulation mechanisms of keratinocytes differentiation and skin barrier homeostasis is important to understand many skin diseases and establish an effective treatment strategy. Calcium ions (Ca 2+ ) and their concentration gradient in the epidermis are essential in regulating many skin functions, including keratinocyte differentiation, skin barrier formation, and permeability barrier homeostasis. Recent studies have suggested that the intracellular Ca 2+ stores such as the endoplasmic reticulum (ER) are the major components that form the epidermal calcium gradient and the ER calcium homeostasis is crucial for regulating keratinocytes differentiation, intercellular junction formation, antimicrobial barrier, and permeability barrier homeostasis. Thus, both Ca 2+ release from intracellular stores, such as the ER and Ca 2+ influx mechanisms are important in skin barrier. In addition, growing evidences identified the functional existence and the role of many types of calcium channels which mediate calcium flux in keratinocytes. In this review, the origin of epidermal calcium gradient and their role in the formation and regulation of skin barrier are focused. We also focus on the role of ER calcium homeostasis in skin barrier. Furthermore, the distribution and role of epidermal calcium channels, including transient receptor potential channels, store-operated calcium entry channel Orai1, and voltage-gated calcium channels in skin barrier are discussed.

Influence of structural dynamics on vehicle design - Government view. [of aerospace vehicles

NASA Technical Reports Server (NTRS)

Kordes, E. E.

1977-01-01

Dynamic design considerations for aerospace vehicles are discussed, taking into account fixed wing aircraft, rotary wing aircraft, and launch, space, and reentry vehicles. It is pointed out that space vehicles have probably had the most significant design problems from the standpoint of structural dynamics, because their large lightweight structures are highly nonlinear. Examples of problems in the case of conventional aircraft include the flutter encountered by high performance military aircraft with external stores. A description is presented of a number of examples which illustrate the direction of present efforts for improving aircraft efficiency. Attention is given to the results of studies on the structural design concepts for the arrow-wing supersonic cruise aircraft configuration and a system study on low-wing-loading, short haul transports.

OpenClimateGIS - A Web Service Providing Climate Model Data in Commonly Used Geospatial Formats

NASA Astrophysics Data System (ADS)

Erickson, T. A.; Koziol, B. W.; Rood, R. B.

2011-12-01

The goal of the OpenClimateGIS project is to make climate model datasets readily available in commonly used, modern geospatial formats used by GIS software, browser-based mapping tools, and virtual globes.The climate modeling community typically stores climate data in multidimensional gridded formats capable of efficiently storing large volumes of data (such as netCDF, grib) while the geospatial community typically uses flexible vector and raster formats that are capable of storing small volumes of data (relative to the multidimensional gridded formats). OpenClimateGIS seeks to address this difference in data formats by clipping climate data to user-specified vector geometries (i.e. areas of interest) and translating the gridded data on-the-fly into multiple vector formats. The OpenClimateGIS system does not store climate data archives locally, but rather works in conjunction with external climate archives that expose climate data via the OPeNDAP protocol. OpenClimateGIS provides a RESTful API web service for accessing climate data resources via HTTP, allowing a wide range of applications to access the climate data.The OpenClimateGIS system has been developed using open source development practices and the source code is publicly available. The project integrates libraries from several other open source projects (including Django, PostGIS, numpy, Shapely, and netcdf4-python).OpenClimateGIS development is supported by a grant from NOAA's Climate Program Office.

Use of External Quality Control Material for HIV-1 RNA Testing To Assess the Comparability of Data Generated in Separate Laboratories and the Stability of HIV-1 RNA in Samples after Prolonged Storage.

PubMed

Jennings, Cheryl; Wager, Carrie G; Scianna, Salvatore R; Zaccaro, Daniel J; Couzens, Amy; Mellors, John W; Coombs, Robert W; Bremer, James W

2018-06-01

The National Institute of Allergy and Infectious Diseases (NIAID) AIDS Clinical Trials Group (ACTG) stores specimens from its clinical trials in a biorepository and permits the use of these specimens for nonprotocol exploratory studies, once the studies for the original protocol are concluded. We sought to assess the comparability of the data generated from real-time HIV-1 RNA testing during two clinical trials with the data generated from the retesting of different aliquots of the same samples after years of storage at -80°C. Overall, there was 92% agreement in the data generated for 1,570 paired samples (kappa statistic = 0.757; 95% confidence interval [CI], 0.716 to 0.797), where samples were tested in one laboratory using the microwell plate (MWP) version of the Roche HIV-1 Monitor test within 1 to 37 days of collection and retested in another laboratory using the Cobas version of the assay after a median of 6.7 years of storage (range, 5.7 to 8.6 years). Historical external quality control data submitted to the NIAID Virology Quality Assurance program (VQA) by client laboratories using the same two versions of the Monitor assay were used to differentiate between systematic differences in the assays to evaluate the stability of HIV-1 RNA in the stored samples. No significant loss of RNA was noted in samples containing either a low concentration (<50 copies/ml) or a high concentration (≥50 copies/ml) of HIV-1 RNA ( P = 0.10 and P = 0.90, respectively) regardless of the time in storage. These data confirm the quality of the plasma samples in the ACTG biorepository following long-term storage. Copyright © 2018 American Society for Microbiology.

Applying Fourier Transform Mid Infrared Spectroscopy to Detect the Adulteration of Salmo salar with Oncorhynchus mykiss

PubMed Central

Moreira, Maria João

2018-01-01

The aim of this study was to evaluate the potential of Fourier transform infrared (FTIR) spectroscopy coupled with chemometric methods to detect fish adulteration. Muscles of Atlantic salmon (Salmo salar) (SS) and Salmon trout (Onconrhynchus mykiss) (OM) muscles were mixed in different percentages and transformed into mini-burgers. These were stored at 3 °C, then examined at 0, 72, 160, and 240 h for deteriorative microorganisms. Mini-burgers was submitted to Soxhlet extraction, following which lipid extracts were analyzed by FTIR. The principal component analysis (PCA) described the studied adulteration using four principal components with an explained variance of 95.60%. PCA showed that the absorbance in the spectral region from 721, 1097, 1370, 1464, 1655, 2805, to 2935, 3009 cm−1 may be attributed to biochemical fingerprints related to differences between SS and OM. The partial least squares regression (PLS-R) predicted the presence/absence of adulteration in fish samples of an external set with high accuracy. The proposed methods have the advantage of allowing quick measurements, despite the storage time of the adulterated fish. FTIR combined with chemometrics showed that a methodology to identify the adulteration of SS with OM can be established, even when stored for different periods of time. PMID:29621135

The Get Away Special Program: Year 2000 and Beyond

NASA Technical Reports Server (NTRS)

Wilcox, David A.

1999-01-01

The Get Away Special (GAS) Program flew its first payload in 1982. Since then, 157 payloads have flown on the STS. As the GAS program approaches the new millennium, interest in flying the low-cost access to space continues. Many changes are in store, or are already underway, that will impact the GAS user community in the coming years. This presentation will briefly outline some of those changes and other external impacts to the GAS Program.

Building 211 cyclotron characterization survey report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-03-30

The Building 211 Cyclotron Characterization Survey includes an assessment of the radioactive and chemical inventory of materials stored within the facility; an evaluation of the relative distribution of accelerator-produced activation products within various cyclotron components and adjacent structures; measurement of the radiation fields throughout the facility; measurement and assessment of internal and external radioactive surface contamination on various equipment, facility structures, and air-handling systems; and an assessment of lead (Pb) paint and asbestos hazards within the facility.

Toppar: an interactive browser for viewing association study results.

PubMed

Juliusdottir, Thorhildur; Banasik, Karina; Robertson, Neil R; Mott, Richard; McCarthy, Mark I

2018-06-01

Data integration and visualization help geneticists make sense of large amounts of data. To help facilitate interpretation of genetic association data we developed Toppar, a customizable visualization tool that stores results from association studies and enables browsing over multiple results, by combining features from existing tools and linking to appropriate external databases. Detailed information on Toppar's features and functionality are on our website http://mccarthy.well.ox.ac.uk/toppar/docs along with instructions on how to download, install and run Toppar. Our online version of Toppar is accessible from the website and can be test-driven using Firefox, Safari or Chrome on sub-sets of publicly available genome-wide association study anthropometric waist and body mass index data (Locke et al., 2015; Shungin et al., 2015) from the Genetic Investigation of ANthropometric Traits consortium. totajuliusd@gmail.com.

Bigger is better: Improved nature conservation and economic returns from landscape-level mitigation.

PubMed

Kennedy, Christina M; Miteva, Daniela A; Baumgarten, Leandro; Hawthorne, Peter L; Sochi, Kei; Polasky, Stephen; Oakleaf, James R; Uhlhorn, Elizabeth M; Kiesecker, Joseph

2016-07-01

Impact mitigation is a primary mechanism on which countries rely to reduce environmental externalities and balance development with conservation. Mitigation policies are transitioning from traditional project-by-project planning to landscape-level planning. Although this larger-scale approach is expected to provide greater conservation benefits at the lowest cost, empirical justification is still scarce. Using commercial sugarcane expansion in the Brazilian Cerrado as a case study, we apply economic and biophysical steady-state models to quantify the benefits of the Brazilian Forest Code (FC) under landscape- and property-level planning. We find that FC compliance imposes small costs to business but can generate significant long-term benefits to nature: supporting 32 (±37) additional species (largely habitat specialists), storing 593,000 to 2,280,000 additional tons of carbon worth $69 million to $265 million ($ pertains to U.S. dollars), and marginally improving surface water quality. Relative to property-level compliance, we find that landscape-level compliance reduces total business costs by $19 million to $35 million per 6-year sugarcane growing cycle while often supporting more species and storing more carbon. Our results demonstrate that landscape-level mitigation provides cost-effective conservation and can be used to promote sustainable development.

Processing Device for High-Speed Execution of an Xrisc Computer Program

NASA Technical Reports Server (NTRS)

Ng, Tak-Kwong (Inventor); Mills, Carl S. (Inventor)

2016-01-01

A processing device for high-speed execution of a computer program is provided. A memory module may store one or more computer programs. A sequencer may select one of the computer programs and controls execution of the selected program. A register module may store intermediate values associated with a current calculation set, a set of output values associated with a previous calculation set, and a set of input values associated with a subsequent calculation set. An external interface may receive the set of input values from a computing device and provides the set of output values to the computing device. A computation interface may provide a set of operands for computation during processing of the current calculation set. The set of input values are loaded into the register and the set of output values are unloaded from the register in parallel with processing of the current calculation set.

Enhancing dielectric permittivity for energy-storage devices through tricritical phenomenon

PubMed Central

Gao, Jinghui; Wang, Yan; Liu, Yongbin; Hu, Xinghao; Ke, Xiaoqin; Zhong, Lisheng; He, Yuting; Ren, Xiaobing

2017-01-01

Although dielectric energy-storing devices are frequently used in high voltage level, the fast growing on the portable and wearable electronics have been increasing the demand on the energy-storing devices at finite electric field strength. This paper proposes an approach on enhancing energy density under low electric field through compositionally inducing tricriticality in Ba(Ti,Sn)O3 ferroelectric material system with enlarged dielectric response. The optimal dielectric permittivity at tricritical point can reach to εr = 5.4 × 104, and the associated energy density goes to around 30 mJ/cm3 at the electric field of 10 kV/cm, which exceeds most of the selected ferroelectric materials at the same field strength. The microstructure nature for such a tricritical behavior shows polarization inhomogeneity in nanometeric scale, which indicates a large polarizability under external electric field. Further phenomenological Landau modeling suggests that large dielectric permittivity and energy density can be ascribed to the vanishing of energy barrier for polarization altering caused by tricriticality. Our results may shed light on developing energy-storing dielectrics with large permittivity and energy density at low electric field. PMID:28098249

Ca2+ Entry is Required for Mechanical Stimulation-induced ATP Release from Astrocyte

PubMed Central

Lee, Jaekwang; Chun, Ye-Eun; Han, Kyung-Seok; Lee, Jungmoo; Woo, Dong Ho

2015-01-01

Astrocytes and neurons are inseparable partners in the brain. Neurotransmitters released from neurons activate corresponding G protein-coupled receptors (GPCR) expressed in astrocytes, resulting in release of gliotransmitters such as glutamate, D-serine, and ATP. These gliotransmitters in turn influence neuronal excitability and synaptic activities. Among these gliotransmitters, ATP regulates the level of network excitability and is critically involved in sleep homeostasis and astrocytic Ca2+ oscillations. ATP is known to be released from astrocytes by Ca2+-dependent manner. However, the precise source of Ca2+, whether it is Ca2+ entry from outside of cell or from the intracellular store, is still not clear yet. Here, we performed sniffer patch to detect ATP release from astrocyte by using various stimulation. We found that ATP was not released from astrocyte when Ca2+ was released from intracellular stores by activation of Gαq-coupled GPCR including PAR1, P2YR, and B2R. More importantly, mechanical stimulation (MS)-induced ATP release from astrocyte was eliminated when external Ca2+ was omitted. Our results suggest that Ca2+ entry, but not release from intracellular Ca2+ store, is critical for MS-induced ATP release from astrocyte. PMID:25792866

A multilevel study of leadership, empowerment, and performance in teams.

PubMed

Chen, Gilad; Kirkman, Bradley L; Kanfer, Ruth; Allen, Don; Rosen, Benson

2007-03-01

A multilevel model of leadership, empowerment, and performance was tested using a sample of 62 teams, 445 individual members, 62 team leaders, and 31 external managers from 31 stores of a Fortune 500 company. Leader-member exchange and leadership climate related differently to individual and team empowerment and interacted to influence individual empowerment. Also, several relationships were supported in more but not in less interdependent teams. Specifically, leader-member exchange related to individual performance partially through individual empowerment; leadership climate related to team performance partially through team empowerment; team empowerment moderated the relationship between individual empowerment and performance; and individual performance was positively related to team performance. Contributions to team leadership theory, research, and practices are discussed. (c) 2007 APA, all rights reserved.

Push-pull converter with energy saving circuit for protecting switching transistors from peak power stress

NASA Technical Reports Server (NTRS)

Mclyman, W. T. (Inventor)

1981-01-01

In a push-pull converter, switching transistors are protected from peak power stresses by a separate snubber circuit in parallel with each comprising a capacitor and an inductor in series, and a diode in parallel with the inductor. The diode is connected to conduct current of the same polarity as the base-emitter juction of the transistor so that energy stored in the capacitor while the transistor is switched off, to protect it against peak power stress, discharges through the inductor when the transistor is turned on, and after the capacitor is discharges through the diode. To return this energy to the power supply, or to utilize this energy in some external circuit, the inductor may be replaced by a transformer having its secondary winding connected to the power supply or to the external circuit.

FPGA based charge fast histogramming for GEM detector

NASA Astrophysics Data System (ADS)

Poźniak, Krzysztof T.; Byszuk, A.; Chernyshova, M.; Cieszewski, R.; Czarski, T.; Dominik, W.; Jakubowska, K.; Kasprowicz, G.; Rzadkiewicz, J.; Scholz, M.; Zabolotny, W.

2013-10-01

This article presents a fast charge histogramming method for the position sensitive X-ray GEM detector. The energy resolved measurements are carried out simultaneously for 256 channels of the GEM detector. The whole process of histogramming is performed in 21 FPGA chips (Spartan-6 series from Xilinx) . The results of the histogramming process are stored in an external DDR3 memory. The structure of an electronic measuring equipment and a firmware functionality implemented in the FPGAs is described. Examples of test measurements are presented.

Application of reiteration of Hankel singular value decomposition in quality control

NASA Astrophysics Data System (ADS)

Staniszewski, Michał; Skorupa, Agnieszka; Boguszewicz, Łukasz; Michalczuk, Agnieszka; Wereszczyński, Kamil; Wicher, Magdalena; Konopka, Marek; Sokół, Maria; Polański, Andrzej

2017-07-01

Medical centres are obliged to store past medical records, including the results of quality assurance (QA) tests of the medical equipment, which is especially useful in checking reproducibility of medical devices and procedures. Analysis of multivariate time series is an important part of quality control of NMR data. In this work we proposean anomaly detection tool based on Reiteration of Hankel Singular Value Decomposition method. The presented method was compared with external software and authors obtained comparable results.

A 10-MJ compact homopolar generator

NASA Astrophysics Data System (ADS)

McKee, B. D.; McNab, I. R.

1986-11-01

The design and initial testing of a lightweight (5 kJ/kg) iron-cored homopolar generator is described. The machine employs an external power supply to motor up to operating speed (12,500 rpm) at which point 10 MJ of energy is stored in the steel rotor. Copper-graphite brushes in the stator, actuated by pneumatic actuators, make contact with the rotor surface and permit the inertial energy to be transferred to a load circuit at current levels up to 1.5 MA and voltages up to 60 V.

Development of a HACS User Interface Module.

DTIC Science & Technology

1981-09-30

OF 0 IS STORED FOR ALL UNDEFINED SEGMENTS, C C COMMON/PLTCN/ANG,IBUF(4000),IFRSTIPLTWIND CC C ANG = SPECIFIES WIND DIRECTION FROM NORTH FOR USE IN...FILE NAME USED FOR PLOT TAPE C WIND = WIND VELOCITY OBTAINED FROM HACS DATA FIELD 2016 C C EXTERNAL FCHCK INTEGER FLDTAB(257) INTEGER SCNTAB(32...MSGSpMSG DIMENSION SAVE(2489) PSTATE(2489) EQUIVALENCE (SAVE(1) PMSGS (1) ) (STATE(1) ,MS6(1)) C OCOMMON/CNTRL/EOFFICDIDFLTLBL(4),LSTCN(3,3),MODEL(15),NOP

Encyclopedia of US Air Force Aircraft and Missile Systems. Volume 1. Post-World War II Fighters 1945-1973,

DTIC Science & Technology

1978-01-01

around 100 miles. With two Lockheed external 165-gallon tanks (and a full rocket load ) it was only 225 miles. Lieutenants Edward R. Johnston and...start. 12 While waiting for acceptable engines, North American had to bear the expense of storing unequipped F-82 airframes.13 The situation grew so bad...secure a suitable airframe for the GE TG-180 axial flow gas turbine engine, that the Air Technical Service Command of the Army Air Forces was

Toroidal constant-tension superconducting magnetic energy storage units

DOEpatents

Herring, J. Stephen

1992-01-01

A superconducting magnetic energy storage unit is provided in which the magnet is wound in a toroidal fashion such that the magnetic field produced is contained only within the bore of the magnet, and thus producing a very low external field. The superconducting magnet includes a coolant channel disposed through the wire. The bore of the magnet comprises a storage volume in which cryogenic coolant is stored, and this volume supplies the coolant to be delivered to the coolant channel in the magnet.

Toroidal constant-tension superconducting magnetic energy storage units

DOEpatents

Herring, J.S.

1992-11-03

A superconducting magnetic energy storage unit is provided in which the magnet is wound in a toroidal fashion such that the magnetic field produced is contained only within the bore of the magnet, and thus producing a very low external field. The superconducting magnet includes a coolant channel disposed through the wire. The bore of the magnet comprises a storage volume in which cryogenic coolant is stored, and this volume supplies the coolant to be delivered to the coolant channel in the magnet. 6 figs.

Storage and retrieval of quantum information with a hybrid optomechanics-spin system

NASA Astrophysics Data System (ADS)

Feng, Zhi-Bo; Zhang, Jian-Qi; Yang, Wan-Li; Feng, Mang

2016-08-01

We explore an efficient scheme for transferring the quantum state between an optomechanical cavity and an electron spin of diamond nitrogen-vacancy center. Assisted by a mechanical resonator, quantum information can be controllably stored (retrieved) into (from) the electron spin by adjusting the external field-induced detuning or coupling. Our scheme connects effectively the cavity photon and the electron spin and transfers quantum states between two regimes with large frequency difference. The experimental feasibility of our protocol is justified with accessible laboratory parameters.

Open Smart Energy Gateway (OpenSEG)

DOE Office of Scientific and Technical Information (OSTI.GOV)

The Open Smart Energy Gateway (OpenSEG) aims to provide near-real time smart meter data to consumers without the delays or latencies associated with it being transported to the utility data center and then back to the consumer's application. To do this, the gateway queries the local Smart Meter to which it is bound to get energy consumption information at pre-defined intervals (minimum interval is 4 seconds). OpenSEG then stores the resulting data internally for retrieval by an external application.

Long-term trends in nutrient budgets of the western Dutch Wadden Sea (1976-2012)

NASA Astrophysics Data System (ADS)

Jung, A. S.; Brinkman, A. G.; Folmer, E. O.; Herman, P. M. J.; van der Veer, H. W.; Philippart, C. J. M.

2017-09-01

Long-term field observations of nitrogen [N] and phosphorus [P] concentrations were used to construct nutrient budgets for the western Dutch Wadden Sea between 1976 and 2012. Nutrients come into the western Dutch Wadden Sea via river runoff, through exchange with the coastal zone of the North Sea, neighbouring tidal basins and through atmospheric deposition (for N). The highest concentrations in phosphorus and nitrogen were observed in the mid-1980s. Improved phosphorus removal at waste water treatment plants, management of fertilization in agriculture and removal of phosphates from detergents led to reduced riverine nutrient inputs and, consequently, reduced nutrient concentrations in the Wadden Sea. The budgets suggest that the period of the initial net import of phosphorus and nitrogen switched to a net export in 1981 for nitrogen and in 1992 for phosphorus. Such different behaviour in nutrient budgets during the rise and fall of external nutrient concentrations may be the result of different sediment-water exchange dynamics for P and N. It is hypothesized that during the period of increasing eutrophication (1976-1981) P, and to a lesser degree N, were stored in sediments as organic and inorganic nutrients. In the following period (1981-1992) external nutrient concentrations (especially in the North Sea) decreased, but P concentrations in the Wadden Sea remained high due to prolonged sediment release, whilst denitrification removed substantial amounts of N. From 1992 onwards, P and N budgets were closed by net loss, most probably because P stores were then depleted and denitrification continued. Under the present conditions (lower rates of sediment import and depleted P stores), nutrient concentrations in this area are expected to be more strongly influenced by wind-driven exchange with the North Sea and precipitation-driven discharge from Lake IJssel. This implies that the consequences of climate change will be more important, than during the 1970s and 1980s.

Development plan for the External Hazards Experimental Group. Light Water Reactor Sustainability Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Justin Leigh; Smith, Curtis Lee; Burns, Douglas Edward

This report describes the development plan for a new multi-partner External Hazards Experimental Group (EHEG) coordinated by Idaho National Laboratory (INL) within the Risk-Informed Safety Margin Characterization (RISMC) technical pathway of the Light Water Reactor Sustainability Program. Currently, there is limited data available for development and validation of the tools and methods being developed in the RISMC Toolkit. The EHEG is being developed to obtain high-quality, small- and large-scale experimental data validation of RISMC tools and methods in a timely and cost-effective way. The group of universities and national laboratories that will eventually form the EHEG (which is ultimately expectedmore » to include both the initial participants and other universities and national laboratories that have been identified) have the expertise and experimental capabilities needed to both obtain and compile existing data archives and perform additional seismic and flooding experiments. The data developed by EHEG will be stored in databases for use within RISMC. These databases will be used to validate the advanced external hazard tools and methods.« less

Integration of external metadata into the Earth System Grid Federation (ESGF)

NASA Astrophysics Data System (ADS)

Berger, Katharina; Levavasseur, Guillaume; Stockhause, Martina; Lautenschlager, Michael

2015-04-01

International projects with high volume data usually disseminate their data in a federated data infrastructure, e.g.~the Earth System Grid Federation (ESGF). The ESGF aims to make the geographically distributed data seamlessly discoverable and accessible. Additional data-related information is currently collected and stored in separate repositories by each data provider. This scattered and useful information is not or only partly available for ESGF users. Examples for such additional information systems are ES-DOC/metafor for model and simulation information, IPSL's versioning information, CHARMe for user annotations, DKRZ's quality information and data citation information. The ESGF Quality Control working team (esgf-qcwt) aims to integrate these valuable pieces of additional information into the ESGF in order to make them available to users and data archive managers by (i) integrating external information into ESGF portal, (ii) integrating links to external information objects into the ESGF metadata index, e.g. by the use of PIDs (Persistent IDentifiers), and (iii) automating the collection of external information during the ESGF data publication process. For the sixth phase of CMIP (Coupled Model Intercomparison Project), the ESGF metadata index is to be enriched by additional information on data citation, file version, etc. This information will support users directly and can be automatically exploited by higher level services (human and machine readability).

Pattern recognition with "materials that compute".

PubMed

Fang, Yan; Yashin, Victor V; Levitan, Steven P; Balazs, Anna C

2016-09-01

Driven by advances in materials and computer science, researchers are attempting to design systems where the computer and material are one and the same entity. Using theoretical and computational modeling, we design a hybrid material system that can autonomously transduce chemical, mechanical, and electrical energy to perform a computational task in a self-organized manner, without the need for external electrical power sources. Each unit in this system integrates a self-oscillating gel, which undergoes the Belousov-Zhabotinsky (BZ) reaction, with an overlaying piezoelectric (PZ) cantilever. The chemomechanical oscillations of the BZ gels deflect the PZ layer, which consequently generates a voltage across the material. When these BZ-PZ units are connected in series by electrical wires, the oscillations of these units become synchronized across the network, where the mode of synchronization depends on the polarity of the PZ. We show that the network of coupled, synchronizing BZ-PZ oscillators can perform pattern recognition. The "stored" patterns are set of polarities of the individual BZ-PZ units, and the "input" patterns are coded through the initial phase of the oscillations imposed on these units. The results of the modeling show that the input pattern closest to the stored pattern exhibits the fastest convergence time to stable synchronization behavior. In this way, networks of coupled BZ-PZ oscillators achieve pattern recognition. Further, we show that the convergence time to stable synchronization provides a robust measure of the degree of match between the input and stored patterns. Through these studies, we establish experimentally realizable design rules for creating "materials that compute."

cPath: open source software for collecting, storing, and querying biological pathways

PubMed Central

Cerami, Ethan G; Bader, Gary D; Gross, Benjamin E; Sander, Chris

2006-01-01

Background Biological pathways, including metabolic pathways, protein interaction networks, signal transduction pathways, and gene regulatory networks, are currently represented in over 220 diverse databases. These data are crucial for the study of specific biological processes, including human diseases. Standard exchange formats for pathway information, such as BioPAX, CellML, SBML and PSI-MI, enable convenient collection of this data for biological research, but mechanisms for common storage and communication are required. Results We have developed cPath, an open source database and web application for collecting, storing, and querying biological pathway data. cPath makes it easy to aggregate custom pathway data sets available in standard exchange formats from multiple databases, present pathway data to biologists via a customizable web interface, and export pathway data via a web service to third-party software, such as Cytoscape, for visualization and analysis. cPath is software only, and does not include new pathway information. Key features include: a built-in identifier mapping service for linking identical interactors and linking to external resources; built-in support for PSI-MI and BioPAX standard pathway exchange formats; a web service interface for searching and retrieving pathway data sets; and thorough documentation. The cPath software is freely available under the LGPL open source license for academic and commercial use. Conclusion cPath is a robust, scalable, modular, professional-grade software platform for collecting, storing, and querying biological pathways. It can serve as the core data handling component in information systems for pathway visualization, analysis and modeling. PMID:17101041

Ambient beam motion and its excitation by ghost lines in the Tevatron

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shiltsev, V.; /Fermilab

2011-03-01

Transverse betatron motion of the Tevatron proton beam is measured and analyzed. It is shown that the motion is coherent and excited by external sources of unknown origins. Observations of the time-varying 'ghost lines' in the betatron spectrum are reported. The direct measurement of the rms betatron oscillations amplitude estimates it at about 110 nm at {beta}{sub y} {approx} 900 m. Correspondingly, at the amplitudes at the average beta function location with {beta}{sub y} {approx} 50 m is about 25 nm. Given that such direct measurements with clearly observable betatron peak were not repeatedly reproducible, one can conclude that wellmore » know 'ghost lines' are the reason for that - as they are come and go without any obvious regularity. Our analysis of these 'ghost lines' shows that (a) besides slow motion across frequencies, they also exhibit oscillatory movements with period varying from 15-20 min to few hours; (b) for the stores analysed, the lines add about factor of 2 to average - over colliding store duration - Schottky power in the betatron bands. The latter allows to estimate that they contribute about half to the previously determined the rms normalized emittance growth rate of some 0.06 {pi} mm mrad/hr. The Tevatron 'ghost lines' look very similar to infamous 'humps' recently observed in the LHC. Those 'humps' are unwanted oscillations seen repeatedly in the LHC beams (mostly in the vertical plane) and also believed to be caused by external excitations.« less

Sexual selection on morphological and physiological traits and fluctuating asymmetry in the black scavenger fly Sepsis cynipsea.

PubMed

Blanckenhorn, W U; Kraushaar, U R S; Teuschl, Y; Reim, C

2004-05-01

Previous univariate studies of the fly Sepsis cynipsea (Diptera: Sepsidae) have demonstrated spatiotemporally variable and consequently overall weak sexual selection favouring large male size, which is nevertheless stronger on average than fecundity selection favouring larger females. To identify specific target(s) of selection on body size and additional traits possibly affecting mating success, two multivariate field studies of sexual selection were conducted. In one study using seasonal replicates from three populations, we assessed 15 morphological traits. No clear targets of sexual selection on male size could be detected, perhaps because spatiotemporal variation in selection was again strong. In particular, there was no (current) selection on male abdomen length or fore coxa length, the only traits for which S. cynipsea males are not smaller than females. Interestingly, copulating males had a consistently shorter fore femur base, a secondary sexual trait, and a wider clasper (hypopygium) gap, an external genital trait. In a second study using daily and seasonal replicates from one population, we included physiological measures of energy reserves (lipids, glucose, glycogen), in addition to hind tibia length and fluctuating asymmetry (FA) of all pairs of legs. This study again confirmed the mating advantage of large males, and additionally suggests independent positive influences of lipids (the long-term energy stores), with effects of glucose and glycogen (the short-term energy stores) tending to be negative. FA of paired traits was not associated with male mating success. Our study suggests that inclusion of physiological measures and genital traits in phenomenological studies of selection, which is rare, would be fruitful in other species.

Differential Effects of Paced and Unpaced Responding on delayed Serial Order Recall in Schizophrenia

PubMed Central

Hill, S. Kristian; Griffin, Ginny B.; Houk, James C.; Sweeney, John A.

2011-01-01

Working memory for temporal order is a component of working memory that is especially dependent on striatal systems, but has not been extensively studied in schizophrenia. This study was designed to characterize serial order reproduction by adapting a spatial serial order task developed for nonhuman primate studies, while controlling for working memory load and whether responses were initiated freely (unpaced) or in an externally paced format. Clinically stable schizophrenia patients (n=27) and psychiatrically healthy individuals (n=25) were comparable on demographic variables and performance on standardized tests of immediate serial order recall (Digit Span, Spatial Span). No group differences were observed for serial order recall when read sequence reproduction was unpaced. However, schizophrenia patients exhibited significant impairments when responding was paced, regardless of sequence length or retention delay. Intact performance by schizophrenia patients during the unpaced condition indicates that prefrontal storage and striatal output systems are sufficiently intact to learn novel response sequences and hold them in working memory to perform serial order tasks. However, retention for newly learned response sequences was disrupted in schizophrenia patients by paced responding, when read-out of each element in the response sequence was externally controlled. The disruption of memory for serial order in paced read-out condition indicates a deficit in frontostriatal interaction characterized by an inability to update working memory stores and deconstruct ‘chunked’ information. PMID:21705197

Pausing and activating thread state upon pin assertion by external logic monitoring polling loop exit time condition

DOEpatents

Chen, Dong; Giampapa, Mark; Heidelberger, Philip; Ohmacht, Martin; Satterfield, David L; Steinmacher-Burow, Burkhard; Sugavanam, Krishnan

2013-05-21

A system and method for enhancing performance of a computer which includes a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program are executed by a processer. The processor processes instructions from the program. A wait state in the processor waits for receiving specified data. A thread in the processor has a pause state wherein the processor waits for specified data. A pin in the processor initiates a return to an active state from the pause state for the thread. A logic circuit is external to the processor, and the logic circuit is configured to detect a specified condition. The pin initiates a return to the active state of the thread when the specified condition is detected using the logic circuit.

Quantum decision-maker theory and simulation

NASA Astrophysics Data System (ADS)

Zak, Michail; Meyers, Ronald E.; Deacon, Keith S.

2000-07-01

A quantum device simulating the human decision making process is introduced. It consists of quantum recurrent nets generating stochastic processes which represent the motor dynamics, and of classical neural nets describing the evolution of probabilities of these processes which represent the mental dynamics. The autonomy of the decision making process is achieved by a feedback from the mental to motor dynamics which changes the stochastic matrix based upon the probability distribution. This feedback replaces unavailable external information by an internal knowledge- base stored in the mental model in the form of probability distributions. As a result, the coupled motor-mental dynamics is described by a nonlinear version of Markov chains which can decrease entropy without an external source of information. Applications to common sense based decisions as well as to evolutionary games are discussed. An example exhibiting self-organization is computed using quantum computer simulation. Force on force and mutual aircraft engagements using the quantum decision maker dynamics are considered.

The STS-93 external tank and booster stack sits at the Mobile Launcher Platform park site

NASA Technical Reports Server (NTRS)

1999-01-01

The STS-93 stack of solid rocket boosters and external tank sits at the Mobile Launcher Platform park site waiting for lightning shield wires to be installed on the Vehicle Assembly Building (VAB) in the background. The stack is being temporarily stored outside the VAB while Space Shuttle Discovery undergoes repair to hail damage in High Bay 1. Discovery was rolled back from Pad 39B to the VAB for repairs because access to all of the damaged areas was not possible at the pad. The STS-93 stack will be moved under the wires at the VAB for protection until Discovery returns to the pad, later this week. The scheduled date for launch of mission STS-96 is no earlier than May 27. STS-93 is targeted for launch on July 22, carrying the Chandra X-ray Observatory.

Patient ECG recording control for an automatic implantable defibrillator

NASA Technical Reports Server (NTRS)

Fountain, Glen H. (Inventor); Lee, Jr., David G. (Inventor); Kitchin, David A. (Inventor)

1986-01-01

An implantable automatic defibrillator includes sensors which are placed on or near the patient's heart to detect electrical signals indicative of the physiology of the heart. The signals are digitally converted and stored into a FIFO region of a RAM by operation of a direct memory access (DMA) controller. The DMA controller operates transparently with respect to the microprocessor which is part of the defibrillator. The implantable defibrillator includes a telemetry communications circuit for sending data outbound from the defibrillator to an external device (either a patient controller or a physician's console or other) and a receiver for sensing at least an externally generated patient ECG recording command signal. The patient recording command signal is generated by the hand held patient controller. Upon detection of the patient ECG recording command, DMA copies the contents of the FIFO into a specific region of the RAM.

[Involvement of hydrogen peroxide in the regulation of coexpression of alternative oxidase and rotenone-insensitive NADH dehydrogenase in tomato leaves and calluses].

PubMed

Eprintsev, A T; Mal'tseva, E V; Shatskikh, A S; Popov, V N

2011-01-01

The involvement of active oxygen forms in the regulation of the expression of mitochondrial respiratory chain components, which are not related to energy storing, has been in vitro and in vivo studied in Lycopersicum esculentum L. The highest level of transcription of genes encoding alternative oxidase and NADH dehydrogenase has been observed in green tomato leaves. It has been shown that even low H2O2 concentrations activate both aoxlalpha and ndb1 genes, encoding alternative oxidase and external mitochondrial rotenone-insensitive NADH dehydrogenase, respectively. According to our results, in the case of an oxidative stress, alternative oxidase and NADH dehydrogenase are coexpressed in tomato plant tissues, and active oxygen forms serve as the secondary messengers of their coexpression.

Google effects on memory: cognitive consequences of having information at our fingertips.

PubMed

Sparrow, Betsy; Liu, Jenny; Wegner, Daniel M

2011-08-05

The advent of the Internet, with sophisticated algorithmic search engines, has made accessing information as easy as lifting a finger. No longer do we have to make costly efforts to find the things we want. We can "Google" the old classmate, find articles online, or look up the actor who was on the tip of our tongue. The results of four studies suggest that when faced with difficult questions, people are primed to think about computers and that when people expect to have future access to information, they have lower rates of recall of the information itself and enhanced recall instead for where to access it. The Internet has become a primary form of external or transactive memory, where information is stored collectively outside ourselves.

Pertinent plasma indicators of the ability of chickens to synthesize and store lipids.

PubMed

Baéza, E; Jégou, M; Gondret, F; Lalande-Martin, J; Tea, I; Le Bihan-Duval, E; Berri, C; Collin, A; Métayer-Coustard, S; Louveau, I; Lagarrigue, S; Duclos, M J

2015-01-01

Excessive deposition of body fat is detrimental to production efficiency. The aim of this study was to provide plasma indicators of chickens' ability to store fat. From 3 to 9 wk of age, chickens from 2 experimental lines exhibiting a 2.5-fold difference in abdominal fat content and fed experimental diets with contrasted feed energy sources were compared. The diets contained 80 vs. 20 g of lipids and 379 vs. 514 g of starch per kg of feed, respectively, but had the same ME and total protein contents. Cellulose was used to dilute energy in the high-fat diet. At 9 wk of age, the body composition was analyzed and blood samples were collected. A metabolome-wide approach based on proton nuclear magnetic resonance spectroscopy was associated with conventional measurements of plasma parameters. A metabolomics approach showed that betaine, glutamine, and histidine were the most discriminating metabolites between groups. Betaine, uric acid, triglycerides, and phospholipids were positively correlated (r > 0.3; P < 0.05) and glutamine, histidine, triiodothyronine, homocysteine, and β-hydroxybutyrate were negatively correlated (r < -0.3; P < 0.05) with relative weight of abdominal fat and/or fat situated at the top of external face of the thigh. The combination of plasma free fatty acids, total cholesterol, phospholipid, β-hydroxybutyrate, glutamine, and methionine levels accounted for 74% of the variability of the relative weight of abdominal fat. On the other hand, the combination of plasma triglyceride and homocysteine levels accounted for 37% of the variability of fat situated at the top of external face of the thigh. The variations in plasma levels of betaine, homocysteine, uric acid, glutamine, and histidine suggest the implication of methyl donors in the control of hepatic lipid synthesis and illustrate the interplay between AA, glucose, and lipid metabolisms in growing chickens.

Impact of Different Elastomer Formulations on Moisture Permeation through Stoppers Used for Lyophilized Products Stored under Humid Conditions.

PubMed

Sasaki, Hitoshi; Kikuchi, Jun; Maeda, Terutoshi; Kuboniwa, Hitoshi

2010-01-01

The purpose of this study was to evaluate the effect of moisture permeability of different elastomer formulation stoppers, which had different moisture absorption abilities, on the increase of moisture content inside lyophilized vials during long-term storage under humid conditions. Two different elastomer formulation stoppers (high-moisture and low-moisture uptake stoppers) were compared. The increased amount of moisture content inside lyophilized vials fitted with high-moisture stoppers was higher than those fitted with low-moisture stoppers during the early stage of storage. However, this trend was reversed during the later stage of storage. Our data show that the moisture increase inside the lyophilized vials at the early stage was caused by moisture transfer from the stoppers, whereas the later moisture increase was caused by external moisture permeation through the stoppers. Results indicate that the difference in the moisture uptake profile inside the lyophilized vials at each period of storage was caused by the moisture absorption ability and moisture permeation ability of the two elastomer formulation stoppers. In terms of long-term storage stability under humid conditions, our data indicate that external moisture permeating through the stopper into the lyophilized vial during the late stage was the more important factor. In addition, the increase in moisture content at the early stage was controlled by stopper drying time. Furthermore, stopper drying time did not have an effect on moisture permeation at the late stage. Moisture permeation during the storage period appears to be dependent on the different elastomer formulations of the stoppers. The moisture permeation of different elastomer stoppers was an important factor in terms of the increased moisture content inside the lyophilized vials during the late stage of long-term storage under humid conditions. For lyophilized products stored at room temperature, the moisture permeation ability of the stopper is one of the most important factors for long-term storage stability.

Bigger is better: Improved nature conservation and economic returns from landscape-level mitigation

PubMed Central

Kennedy, Christina M.; Miteva, Daniela A.; Baumgarten, Leandro; Hawthorne, Peter L.; Sochi, Kei; Polasky, Stephen; Oakleaf, James R.; Uhlhorn, Elizabeth M.; Kiesecker, Joseph

2016-01-01

Impact mitigation is a primary mechanism on which countries rely to reduce environmental externalities and balance development with conservation. Mitigation policies are transitioning from traditional project-by-project planning to landscape-level planning. Although this larger-scale approach is expected to provide greater conservation benefits at the lowest cost, empirical justification is still scarce. Using commercial sugarcane expansion in the Brazilian Cerrado as a case study, we apply economic and biophysical steady-state models to quantify the benefits of the Brazilian Forest Code (FC) under landscape- and property-level planning. We find that FC compliance imposes small costs to business but can generate significant long-term benefits to nature: supporting 32 (±37) additional species (largely habitat specialists), storing 593,000 to 2,280,000 additional tons of carbon worth $69 million to $265 million ($ pertains to U.S. dollars), and marginally improving surface water quality. Relative to property-level compliance, we find that landscape-level compliance reduces total business costs by $19 million to $35 million per 6-year sugarcane growing cycle while often supporting more species and storing more carbon. Our results demonstrate that landscape-level mitigation provides cost-effective conservation and can be used to promote sustainable development. PMID:27419225

Peatland geoengineering: an alternative approach to terrestrial carbon sequestration.

PubMed

Freeman, Christopher; Fenner, Nathalie; Shirsat, Anil H

2012-09-13

Terrestrial and oceanic ecosystems contribute almost equally to the sequestration of ca 50 per cent of anthropogenic CO(2) emissions, and already play a role in minimizing our impact on Earth's climate. On land, the majority of the sequestered carbon enters soil carbon stores. Almost one-third of that soil carbon can be found in peatlands, an area covering just 2-3% of the Earth's landmass. Peatlands are thus well established as powerful agents of carbon capture and storage; the preservation of archaeological artefacts, such as ancient bog bodies, further attest to their exceptional preservative properties. Peatlands have higher carbon storage densities per unit ecosystem area than either the oceans or dry terrestrial systems. However, despite attempts over a number of years at enhancing carbon capture in the oceans or in land-based afforestation schemes, no attempt has yet been made to optimize peatland carbon storage capacity or even to harness peatlands to store externally captured carbon. Recent studies suggest that peatland carbon sequestration is due to the inhibitory effects of phenolic compounds that create an 'enzymic latch' on decomposition. Here, we propose to harness that mechanism in a series of peatland geoengineering strategies whereby molecular, biogeochemical, agronomical and afforestation approaches increase carbon capture and long-term sequestration in peat-forming terrestrial ecosystems.

YAdumper: extracting and translating large information volumes from relational databases to structured flat files.

PubMed

Fernández, José M; Valencia, Alfonso

2004-10-12

Downloading the information stored in relational databases into XML and other flat formats is a common task in bioinformatics. This periodical dumping of information requires considerable CPU time, disk and memory resources. YAdumper has been developed as a purpose-specific tool to deal with the integral structured information download of relational databases. YAdumper is a Java application that organizes database extraction following an XML template based on an external Document Type Declaration. Compared with other non-native alternatives, YAdumper substantially reduces memory requirements and considerably improves writing performance.

The Effects of Spanwise Structures and Unsteady Forcing of Vortex Generators on a Shock-Induced Separated Flow Using Planar Laser Scattering

DTIC Science & Technology

2006-05-01

official policy or position of the United States Air Force, Department of Defense, or the U.S. Government." Report Documentation Page Form ApprovedOMB...I join my advisors in gratefully acknowledging the Air Force Office of Scientific Research for their support of this research under grant FA9550...was supplied with approximately 140 ft3 (4 m3) of air by a Worthington HB4 four-stage compressor. The air was stored in external tanks at a pressure

Construction Norms Straightened. Part II. Section D. Gas Supply External Networks and Constructions of the Norm of Planning. Chapter 13,

DTIC Science & Technology

1980-05-16

packsd ir scil . In the tarritoriss ci industrial and ccuzunal general enterprises one should aFply the iredcmirantly abcve-grcund packing of gas pipes...gas j~pes can he reduced to 0.6 a. 4.35. Gas pipes, bbihac txamsicrt humid gas, must be laid lower than zcne of freezing cf scil vita draft/gradient...soils sbculd be Frcvided for device under gas Eipe of basis/kase of sandy scil (Dot containing crushed store and ctker large/coarse hard spcts) in

Negative Compressibility and Inverse Problem for Spinning Gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vasily Geyko and Nathaniel J. Fisch

2013-01-11

A spinning ideal gas in a cylinder with a smooth surface is shown to have unusual properties. First, under compression parallel to the axis of rotation, the spinning gas exhibits negative compressibility because energy can be stored in the rotation. Second, the spinning breaks the symmetry under which partial pressures of a mixture of gases simply add proportional to the constituent number densities. Thus, remarkably, in a mixture of spinning gases, an inverse problem can be formulated such that the gas constituents can be determined through external measurements only.

Autonomous momentum management for space station

NASA Technical Reports Server (NTRS)

Hahn, E.

1984-01-01

Momentum management for the CDG planar space platform is discussed. It is assumed that the external torques on the space station are gravity gradient and aerodynamic, both have bias and cyclic terms. The integrals of the cyclic torques are the cyclic momenti which will be stored in the momentum storage actuator. Techniques to counteract the bias torques and center the cyclic momentum and gravity gradient desaturation by adjusting vehicle attitude, aerodynamic desaturation using solar panels and radiators and the deployment of flat plates at the end of long booms generating aerodynamic torques are investigated.

Space Derived Health Aids (AID, Heart Monitor)

NASA Technical Reports Server (NTRS)

1981-01-01

CPI's spinoff from miniaturized pace circuitry is the new heart-assist device, the AID implantable automatic pulse generator. AID pulse generator monitors the heart continuously, recognizes onset of fibrillation, then administers a corrective electrical shock. A mini- computer, a power source, and two electrodes which sense heart activity are included in the unit. An associated system was also developed. It includes an external recorder to be worn by AID patients and a physician's console to display the data stored by the recorder. System provides a record of fibrillation occurrences and the ensuing defibrillation.

Transmembrane adenylyl cyclase regulates amphibian sperm motility through Protein Kinase A activation

PubMed Central

O’Brien, Emma D.; Krapf, Darío; Cabada, Marcelo O.; Visconti, Pablo E.; Arranz, Silvia E.

2014-01-01

Sperm motility is essential for achieving fertilization. In animals with external fertilization as amphibians, spermatozoa are stored in a quiescent state in the testis. Spermiation to hypotonic fertilization media triggers activation of sperm motility. Bufo arenarum sperm are immotile in artificial seminal plasma (ASP) but acquire in situ flagellar beating upon dilution. In addition to the effect of low osmolarity on sperm motility activation, we report that diffusible factors of the egg jelly coat (EW) regulate motility patterns, switching from in situ to progressive movement. The signal transduction pathway involved in amphibian sperm motility activation is mostly unknown. In the present study, we show a correlation between motility activation triggered by low osmotic pressure and activation of protein kinase A (PKA). Moreover, this is the first study to present strong evidences that point toward a role of a transmembrane adenyl-cyclase (tmAC) in the regulation of amphibian sperm motility through PKA activation. PMID:21126515

International Space Station Future Correlation Analysis Improvements

NASA Technical Reports Server (NTRS)

Laible, Michael R.; Pinnamaneni, Murthy; Sugavanam, Sujatha; Grygier, Michael

2018-01-01

Ongoing modal analyses and model correlation are performed on different configurations of the International Space Station (ISS). These analyses utilize on-orbit dynamic measurements collected using four main ISS instrumentation systems: External Wireless Instrumentation System (EWIS), Internal Wireless Instrumentation System (IWIS), Space Acceleration Measurement System (SAMS), and Structural Dynamic Measurement System (SDMS). Remote Sensor Units (RSUs) are network relay stations that acquire flight data from sensors. Measured data is stored in the Remote Sensor Unit (RSU) until it receives a command to download data via RF to the Network Control Unit (NCU). Since each RSU has its own clock, it is necessary to synchronize measurements before analysis. Imprecise synchronization impacts analysis results. A study was performed to evaluate three different synchronization techniques: (i) measurements visually aligned to analytical time-response data using model comparison, (ii) Frequency Domain Decomposition (FDD), and (iii) lag from cross-correlation to align measurements. This paper presents the results of this study.

External Data and Attribute Hyperlink Programs for Promis*e(Registered Trademark)

NASA Technical Reports Server (NTRS)

Derengowski, Rich; Gruel, Andrew

2001-01-01

External Data and Attribute Hyperlink are computer programs that can be added to Promis*e(trademark) which is a commercial software system that automates routine tasks in the design (including drawing schematic diagrams) of electrical control systems. The programs were developed under the Stennis Space Center's (SSC) Dual Use Technology Development Program to provide capabilities for SSC's BMCS configuration management system which uses Promis*e(trademark). The External Data program enables the storage and management of information in an external database linked to a drawing. Changes can be made either in the database or on the drawing. Information that originates outside Promis*e(trademark) can be stored in custom fields that can be added to the database. Although this information is not available in Promis*e(trademark) printed drawings, it can be associated with symbols in the drawings, and can be retrieved through the drawings when the software is running. The Attribute Hyperlink program enables the addition of hyperlink information as attributes of symbols. This program enables the formation of a direct hyperlink between a schematic diagram and an Internet site or a file on a compact disk, on the user's hard drive, or on another computer on a network to which the user's computer is connected. The user can then obtain information directly related to the part (e.g., maintenance, or troubleshooting information) associated with the hyperlink.

Confinement of laser plasma expansion with strong external magnetic field

NASA Astrophysics Data System (ADS)

Tang, Hui-bo; Hu, Guang-yue; Liang, Yi-han; Tao, Tao; Wang, Yu-lin; Hu, Peng; Zhao, Bin; Zheng, Jian

2018-05-01

The evolutions of laser ablation plasma, expanding in strong (∼10 T) transverse external magnetic field, were investigated in experiments and simulations. The experimental results show that the magnetic field pressure causes the plasma decelerate and accumulate at the plasma-field interface, and then form a low-density plasma bubble. The saturation size of the plasma bubble has a scaling law on laser energy and magnetic field intensity. Magnetohydrodynamic simulation results support the observation and find that the scaling law (V max ∝ E p /B 2, where V max is the maximum volume of the plasma bubble, E p is the absorbed laser energy, and B is the magnetic field intensity) is effective in a broad laser energy range from several joules to kilo-joules, since the plasma is always in the state of magnetic field frozen while expanding. About 15% absorbed laser energy converts into magnetic field energy stored in compressed and curved magnetic field lines. The duration that the plasma bubble comes to maximum size has another scaling law t max ∝ E p 1/2/B 2. The plasma expanding dynamics in external magnetic field have a similar character with that in underdense gas, which indicates that the external magnetic field may be a feasible approach to replace the gas filled in hohlraum to suppress the wall plasma expansion and mitigate the stimulated scattering process in indirect drive ignition.

Hybrid computing using a neural network with dynamic external memory.

PubMed

Graves, Alex; Wayne, Greg; Reynolds, Malcolm; Harley, Tim; Danihelka, Ivo; Grabska-Barwińska, Agnieszka; Colmenarejo, Sergio Gómez; Grefenstette, Edward; Ramalho, Tiago; Agapiou, John; Badia, Adrià Puigdomènech; Hermann, Karl Moritz; Zwols, Yori; Ostrovski, Georg; Cain, Adam; King, Helen; Summerfield, Christopher; Blunsom, Phil; Kavukcuoglu, Koray; Hassabis, Demis

2016-10-27

Artificial neural networks are remarkably adept at sensory processing, sequence learning and reinforcement learning, but are limited in their ability to represent variables and data structures and to store data over long timescales, owing to the lack of an external memory. Here we introduce a machine learning model called a differentiable neural computer (DNC), which consists of a neural network that can read from and write to an external memory matrix, analogous to the random-access memory in a conventional computer. Like a conventional computer, it can use its memory to represent and manipulate complex data structures, but, like a neural network, it can learn to do so from data. When trained with supervised learning, we demonstrate that a DNC can successfully answer synthetic questions designed to emulate reasoning and inference problems in natural language. We show that it can learn tasks such as finding the shortest path between specified points and inferring the missing links in randomly generated graphs, and then generalize these tasks to specific graphs such as transport networks and family trees. When trained with reinforcement learning, a DNC can complete a moving blocks puzzle in which changing goals are specified by sequences of symbols. Taken together, our results demonstrate that DNCs have the capacity to solve complex, structured tasks that are inaccessible to neural networks without external read-write memory.

Introduction to a Special Issue of the Journal of Immunological Methods: Building global resource programs to support HIV/AIDS clinical trial studies.

PubMed

Sanchez, Ana M; Denny, Thomas N; O'Gorman, Maurice

2014-07-01

This Special Issue of the Journal of Immunological Methods includes 16 manuscripts describing quality assurance activities related to virologic and immunologic monitoring of six global laboratory resource programs that support international HIV/AIDS clinical trial studies: Collaboration for AIDS Vaccine Discovery (CAVD); Center for HIV/AIDS Vaccine Immunology (CHAVI); External Quality Assurance Program Oversight Laboratory (EQAPOL); HIV Vaccine Trial Network (HVTN); International AIDS Vaccine Initiative (IAVI); and Immunology Quality Assessment (IQA). The reports from these programs address the many components required to develop comprehensive quality control activities and subsequent quality assurance programs for immune monitoring in global clinical trials including: all aspects of processing, storing, and quality assessment of PBMC preparations used ubiquitously in HIV clinical trials, the development and optimization of assays for CD8 HIV responses and HIV neutralization, a comprehensive global HIV virus repository, and reports on the development and execution of novel external proficiency testing programs for immunophenotyping, intracellular cytokine staining, ELISPOT and luminex based cytokine measurements. In addition, there are articles describing the implementation of Good Clinical Laboratory Practices (GCLP) in a large quality assurance laboratory, the development of statistical methods specific for external proficiency testing assessment, a discussion on the ability to set objective thresholds for measuring rare events by flow cytometry, and finally, a manuscript which addresses a framework for the structured reporting of T cell immune function based assays. It is anticipated that this series of manuscripts covering a wide range of quality assurance activities associated with the conduct of global clinical trials will provide a resource for individuals and programs involved in improving the harmonization, standardization, accuracy, and sensitivity of virologic and immunologic testing. Copyright © 2014 Elsevier B.V. All rights reserved.

[The compression and storage of enhanced external counterpulsation waveform based on DICOM standard].

PubMed

Hu, Ding; Xie, Shuqun; Yu, Donglan; Zheng, Zhensheng; Wang, Kuijian

2010-04-01

The development of external counterpulsation (ECP) local area network system and extensible markup language (XML)-based remote ECP medical information system conformable to digital imaging and communications in medicine (DICOM) standard has been improving the digital interchangeablity and sharability of ECP data. However, the therapy process of ECP is a continuous and longtime supervision which builds a mass of waveform data. In order to reduce the storage space and improve the transmission efficiency, the waveform data with the normative format of ECP data files have to be compressed. In this article, we introduced the compression arithmetic of template matching and improved quick fitting of linear approximation distance thresholding (LADT) in combimation with the characters of enhanced external counterpulsation (EECP) waveform signal. The DICOM standard is used as the storage and transmission standard to make our system compatible with hospital information system. According to the rules of transfer syntaxes, we defined private transfer syntax for one-dimensional compressed waveform data and stored EECP data into a DICOM file. Testing result indicates that the compressed and normative data can be correctly transmitted and displayed between EECP workstations in our EECP laboratory.

Sequence-encoded colloidal origami and microbot assemblies from patchy magnetic cubes

PubMed Central

Han, Koohee; Shields, C. Wyatt; Diwakar, Nidhi M.; Bharti, Bhuvnesh; López, Gabriel P.; Velev, Orlin D.

2017-01-01

Colloidal-scale assemblies that reconfigure on demand may serve as the next generation of soft “microbots,” artificial muscles, and other biomimetic devices. This requires the precise arrangement of particles into structures that are preprogrammed to reversibly change shape when actuated by external fields. The design and making of colloidal-scale assemblies with encoded directional particle-particle interactions remain a major challenge. We show how assemblies of metallodielectric patchy microcubes can be engineered to store energy through magnetic polarization and release it on demand by microscale reconfiguration. The dynamic pattern of folding and reconfiguration of the chain-like assemblies can be encoded in the sequence of the cube orientation. The residual polarization of the metallic facets on the microcubes leads to local interactions between the neighboring particles, which is directed by the conformational restrictions of their shape after harvesting energy from external magnetic fields. These structures can also be directionally moved, steered, and maneuvered by global forces from external magnetic fields. We illustrate these capabilities by examples of assemblies of specific sequences that can be actuated, reoriented, and spatially maneuvered to perform microscale operations such as capturing and transporting live cells, acting as prototypes of microbots, micromixers, and other active microstructures. PMID:28798960

Evaluating the performance of microbial fuel cells powering electronic devices

NASA Astrophysics Data System (ADS)

Dewan, Alim; Donovan, Conrad; Heo, Deukhyoun; Beyenal, Haluk

A microbial fuel cell (MFC) is capable of powering an electronic device if we store the energy in an external storage device, such as a capacitor, and dispense that energy intermittently in bursts of high-power when needed. Therefore its performance needs to be evaluated using an energy-storing device such as a capacitor which can be charged and discharged rather than other evaluation techniques, such as continuous energy dissipation through a resistor. In this study, we develop a method of testing microbial fuel cell performance based on storing energy in a capacitor. When a capacitor is connected to a MFC it acts like a variable resistor and stores energy from the MFC at a variable rate. In practice the application of this method to testing microbial fuel cells is very challenging and time consuming; therefore we have custom-designed a microbial fuel cell tester (MFCT). The MFCT evaluates the performance of a MFC as a power source. It uses a capacitor as an energy storing device and waits until a desired amount of energy is stored then discharges the capacitor. The entire process is controlled using an analog-to-digital converter (ADC) board controlled by a custom-written computer program. The utility of our method and the MFCT is demonstrated using a laboratory microbial fuel cell (LMFC) and a sediment microbial fuel cell (SMFC). We determine (1) how frequently a MFC can charge a capacitor, (2) which electrode is current-limiting, (3) what capacitor value will allow the maximum harvested energy from a MFC, which is called the "optimum charging capacitor value," and (4) what capacitor charging potential will harvest the maximum energy from a MFC, which is called the "optimum charging potential." Using a LMFC we find that (1) the time needed to charge a 3-F capacitor from 0 to 500 mV is 108 min, (2) the optimum charging capacitor value is 3 F, and (3) the optimum charging potential is 300 mV. Using a SMFC we find that (1) the time needed to charge a 3-F capacitor from 0 to 500 mV is 5 min, (2) the optimum charging capacitor value is 3 F, and (3) the optimum charging potential is 500 mV. Our results demonstrate that the developed method and the MFCT can be used to evaluate and optimize energy harvesting when a MFC is used with a capacitor to power wireless sensors monitoring the environment.

Synchronous parallel system for emulation and discrete event simulation

NASA Technical Reports Server (NTRS)

Steinman, Jeffrey S. (Inventor)

1992-01-01

A synchronous parallel system for emulation and discrete event simulation having parallel nodes responds to received messages at each node by generating event objects having individual time stamps, stores only the changes to state variables of the simulation object attributable to the event object, and produces corresponding messages. The system refrains from transmitting the messages and changing the state variables while it determines whether the changes are superseded, and then stores the unchanged state variables in the event object for later restoral to the simulation object if called for. This determination preferably includes sensing the time stamp of each new event object and determining which new event object has the earliest time stamp as the local event horizon, determining the earliest local event horizon of the nodes as the global event horizon, and ignoring the events whose time stamps are less than the global event horizon. Host processing between the system and external terminals enables such a terminal to query, monitor, command or participate with a simulation object during the simulation process.

Synchronous Parallel System for Emulation and Discrete Event Simulation

NASA Technical Reports Server (NTRS)

Steinman, Jeffrey S. (Inventor)

2001-01-01

A synchronous parallel system for emulation and discrete event simulation having parallel nodes responds to received messages at each node by generating event objects having individual time stamps, stores only the changes to the state variables of the simulation object attributable to the event object and produces corresponding messages. The system refrains from transmitting the messages and changing the state variables while it determines whether the changes are superseded, and then stores the unchanged state variables in the event object for later restoral to the simulation object if called for. This determination preferably includes sensing the time stamp of each new event object and determining which new event object has the earliest time stamp as the local event horizon, determining the earliest local event horizon of the nodes as the global event horizon, and ignoring events whose time stamps are less than the global event horizon. Host processing between the system and external terminals enables such a terminal to query, monitor, command or participate with a simulation object during the simulation process.

Lenticular card: a new method for denture identification.

PubMed

Colvenkar, Shreya S

2010-01-01

The need for denture marking is important for forensic and social reasons in case patients need to be identified individually. Majority of the surface marking and inclusion techniques are expensive, time consuming, and do not permit the incorporation of large amounts of information. In this article, the method to include a lenticular identification card stood out from the currently available denture marking methods in various ways. The lenticular card stores the patient's information has two or more images that can be viewed by changing the angle of view. The maxillary denture was processed according to the manufacturer's instructions. The lenticular identification card was incorporated in the external posterior buccal surface of the maxillary denture using salt and pepper technique. For testing of durability, denture with the identifier was placed in water for up to 4 months. The proposed method is simple, cheap, and can store a large amount of information, thus allowing quick identification of the denture wearer. The labels showed no sign of fading or deterioration.

Simple Pixel Structure Using Video Data Correction Method for Nonuniform Electrical Characteristics of Polycrystalline Silicon Thin-Film Transistors and Differential Aging Phenomenon of Organic Light-Emitting Diodes

NASA Astrophysics Data System (ADS)

Hai-Jung In,; Oh-Kyong Kwon,

2010-03-01

A simple pixel structure using a video data correction method is proposed to compensate for electrical characteristic variations of driving thin-film transistors (TFTs) and the degradation of organic light-emitting diodes (OLEDs) in active-matrix OLED (AMOLED) displays. The proposed method senses the electrical characteristic variations of TFTs and OLEDs and stores them in external memory. The nonuniform emission current of TFTs and the aging of OLEDs are corrected by modulating video data using the stored data. Experimental results show that the emission current error due to electrical characteristic variation of driving TFTs is in the range from -63.1 to 61.4% without compensation, but is decreased to the range from -1.9 to 1.9% with the proposed correction method. The luminance error due to the degradation of an OLED is less than 1.8% when the proposed correction method is used for a 50% degraded OLED.

Development of Geomagnetic Monitoring System Using a Magnetometer for the Field

NASA Astrophysics Data System (ADS)

Lee, Young-Cheol; Kim, Sung-Wook; Choi, Eun-Kyeong; Kim, In-Soo

2014-05-01

Three institutes including KMA (Korea Meteorological Administration), KSWC (Korean Space Weather Center) of NRRA (National Radio Research Agency) and KIGAM (Korea Institute of Geoscience and Mineral Resources) are now operating magnetic observatories. Those observatories observe the total intensity and three components of geomagnetic element. This paper comes up with a magnetic monitoring system now under development that uses a magnetometer for field survey. In monitoring magnetic variations in areas (active faults or volcanic regions), more reliable results can be obtained when an array of several magnetometers are used rather than a single magnetometer. In order to establish and operate a magnetometer array, such factors as expenses, convenience of the establishment and operation of the array should be taken into account. This study has come up with a magnetic monitoring system complete with a magnetometer for the field survey of our own designing. A magnetic monitoring system, which is composed of two parts. The one is a field part and the other a data part. The field part is composed of a magnetometer, an external memory module, a power supply and a set of data transmission equipment. The data part is a data server which can store the data transmitted from the field part, analyze the data and provide service to the web. This study has developed an external memory module for ENVI-MAG (Scintrex Ltd.) using an embedded Cortex-M3 board, which can be programmed, attach other functional devices (SD memory cards, GPS antennas for time synchronization, ethernet cards and so forth). The board thus developed can store magnetic measurements up to 8 Gbytes, synchronize with the GPS time and transmit the magnetic measurements to the data server which is now under development. A monitoring system of our own developing was installed in Jeju island, taking measurements throughout Korea. Other parts including a data transfer module, a server and a power supply using solar power will continue to be developed in the days to come. Acknowlegments This work was funded by the Korea Meteorological Administration Research and Development Program under Grant CATER 2006-5074

Wind-Tunnel Tests of a 1/8-Scale Powered Model of the XTB3F-1 Airplane, TED No. NACA 2382

NASA Technical Reports Server (NTRS)

McKee, John W.; Vogler, Raymond D.

1947-01-01

A 1/8 scale model of the Grumman XTB3F-1 airplane was tested in the Langley 7- by 10-foot tunnel to determine the stability and control characteristics and to provide data for estimating the airplane handling qualities. The report includes longitudinal and lateral stability and control characteristics of the complete model, the characteristics of the isolated horizontal tail, the effects of various flow conditions through the jet duct, tests with external stores attached to the underside of the wing, ana tests simulating landing and take-off conditions with a ground board. The handling characteristics of the airplane have not been computed but some conclusions were indicated by the data. An improvement in the longitudinal stability was obtained by tilting the thrust line down. It is shown that if the wing flap is spring loaded so that the flap deflection varies with airspeed, the airplanes will be less stable than with the flap retracted or fully deflected. An increase in size of the vertical tail and of the dorsal fin gave more desirable yawing-moment characteristics than the original vertical tail and dorsal fin. Preventing air flow through the jet duct system or simulating jet operation with unheated air produced only small changes in the model characteristics. The external stores on the underside of the wing had only small effects on the model characteristics. After completion of the investigation, the model was returned to the contractor for modifications indicated by the test results.

Cue generation: How learners flexibly support future retrieval.

PubMed

Tullis, Jonathan G; Benjamin, Aaron S

2015-08-01

The successful use of memory requires us to be sensitive to the cues that will be present during retrieval. In many situations, we have some control over the external cues that we will encounter. For instance, learners create shopping lists at home to help remember what items to later buy at the grocery store, and they generate computer file names to help remember the contents of those files. Generating cues in the service of later cognitive goals is a complex task that lies at the intersection of metacognition, communication, and memory. In this series of experiments, we investigated how and how well learners generate external mnemonic cues. Across 5 experiments, learners generated a cue for each target word in a to-be-remembered list and received these cues during a later cued recall test. Learners flexibly generated cues in response to different instructional demands and study list compositions. When generating mnemonic cues, as compared to descriptions of target items, learners produced cues that were more distinct than mere descriptions and consequently elicited greater cued recall performance than those descriptions. When learners were aware of competing targets in the study list, they generated mnemonic cues with smaller cue-to-target associative strength but that were even more distinct. These adaptations led to fewer confusions among competing targets and enhanced cued recall performance. These results provide another example of the metacognitively sophisticated tactics that learners use to effectively support future retrieval.

Community-Level Sanitation Coverage More Strongly Associated with Child Growth and Household Drinking Water Quality than Access to a Private Toilet in Rural Mali.

PubMed

Harris, Michael; Alzua, Maria Laura; Osbert, Nicolas; Pickering, Amy

2017-06-20

Sanitation access can provide positive externalities; for example, safe disposal of feces by one household prevents disease transmission to households nearby. However, little empirical evidence exists to characterize the potential health benefits from sanitation externalities. This study investigated the effect of community sanitation coverage versus individual household sanitation access on child health and drinking water quality. Using a census of 121 villages in rural Mali, we analyzed the association of community latrine coverage (defined by a 200 m radius surrounding a household) and individual household latrine ownership with child growth and household stored water quality. Child height-for-age had a significant and positive linear relationship with community latrine coverage, while child weight-for-age and household water quality had nonlinear relationships that leveled off above 60% coverage (p < 0.01; generalized additive models). Child growth and water quality were not associated with individual household latrine ownership. The relationship between community latrine coverage and child height was strongest among households without a latrine; for these households, each 10% increase in latrine coverage was associated with a 0.031 (p-value = 0.040) increase in height-for-age z-score. In this study, the level of sanitation access of surrounding households was more important than private latrine access for protecting water quality and child health.

Community-Level Sanitation Coverage More Strongly Associated with Child Growth and Household Drinking Water Quality than Access to a Private Toilet in Rural Mali

PubMed Central

2017-01-01

Sanitation access can provide positive externalities; for example, safe disposal of feces by one household prevents disease transmission to households nearby. However, little empirical evidence exists to characterize the potential health benefits from sanitation externalities. This study investigated the effect of community sanitation coverage versus individual household sanitation access on child health and drinking water quality. Using a census of 121 villages in rural Mali, we analyzed the association of community latrine coverage (defined by a 200 m radius surrounding a household) and individual household latrine ownership with child growth and household stored water quality. Child height-for-age had a significant and positive linear relationship with community latrine coverage, while child weight-for-age and household water quality had nonlinear relationships that leveled off above 60% coverage (p < 0.01; generalized additive models). Child growth and water quality were not associated with individual household latrine ownership. The relationship between community latrine coverage and child height was strongest among households without a latrine; for these households, each 10% increase in latrine coverage was associated with a 0.031 (p-value = 0.040) increase in height-for-age z-score. In this study, the level of sanitation access of surrounding households was more important than private latrine access for protecting water quality and child health. PMID:28514143

Experimental Directory Structure (Exdir): An Alternative to HDF5 Without Introducing a New File Format

PubMed Central

Dragly, Svenn-Arne; Hobbi Mobarhan, Milad; Lepperød, Mikkel E.; Tennøe, Simen; Fyhn, Marianne; Hafting, Torkel; Malthe-Sørenssen, Anders

2018-01-01

Natural sciences generate an increasing amount of data in a wide range of formats developed by different research groups and commercial companies. At the same time there is a growing desire to share data along with publications in order to enable reproducible research. Open formats have publicly available specifications which facilitate data sharing and reproducible research. Hierarchical Data Format 5 (HDF5) is a popular open format widely used in neuroscience, often as a foundation for other, more specialized formats. However, drawbacks related to HDF5's complex specification have initiated a discussion for an improved replacement. We propose a novel alternative, the Experimental Directory Structure (Exdir), an open specification for data storage in experimental pipelines which amends drawbacks associated with HDF5 while retaining its advantages. HDF5 stores data and metadata in a hierarchy within a complex binary file which, among other things, is not human-readable, not optimal for version control systems, and lacks support for easy access to raw data from external applications. Exdir, on the other hand, uses file system directories to represent the hierarchy, with metadata stored in human-readable YAML files, datasets stored in binary NumPy files, and raw data stored directly in subdirectories. Furthermore, storing data in multiple files makes it easier to track for version control systems. Exdir is not a file format in itself, but a specification for organizing files in a directory structure. Exdir uses the same abstractions as HDF5 and is compatible with the HDF5 Abstract Data Model. Several research groups are already using data stored in a directory hierarchy as an alternative to HDF5, but no common standard exists. This complicates and limits the opportunity for data sharing and development of common tools for reading, writing, and analyzing data. Exdir facilitates improved data storage, data sharing, reproducible research, and novel insight from interdisciplinary collaboration. With the publication of Exdir, we invite the scientific community to join the development to create an open specification that will serve as many needs as possible and as a foundation for open access to and exchange of data. PMID:29706879

Experimental Directory Structure (Exdir): An Alternative to HDF5 Without Introducing a New File Format.

PubMed

Dragly, Svenn-Arne; Hobbi Mobarhan, Milad; Lepperød, Mikkel E; Tennøe, Simen; Fyhn, Marianne; Hafting, Torkel; Malthe-Sørenssen, Anders

2018-01-01

Natural sciences generate an increasing amount of data in a wide range of formats developed by different research groups and commercial companies. At the same time there is a growing desire to share data along with publications in order to enable reproducible research. Open formats have publicly available specifications which facilitate data sharing and reproducible research. Hierarchical Data Format 5 (HDF5) is a popular open format widely used in neuroscience, often as a foundation for other, more specialized formats. However, drawbacks related to HDF5's complex specification have initiated a discussion for an improved replacement. We propose a novel alternative, the Experimental Directory Structure (Exdir), an open specification for data storage in experimental pipelines which amends drawbacks associated with HDF5 while retaining its advantages. HDF5 stores data and metadata in a hierarchy within a complex binary file which, among other things, is not human-readable, not optimal for version control systems, and lacks support for easy access to raw data from external applications. Exdir, on the other hand, uses file system directories to represent the hierarchy, with metadata stored in human-readable YAML files, datasets stored in binary NumPy files, and raw data stored directly in subdirectories. Furthermore, storing data in multiple files makes it easier to track for version control systems. Exdir is not a file format in itself, but a specification for organizing files in a directory structure. Exdir uses the same abstractions as HDF5 and is compatible with the HDF5 Abstract Data Model. Several research groups are already using data stored in a directory hierarchy as an alternative to HDF5, but no common standard exists. This complicates and limits the opportunity for data sharing and development of common tools for reading, writing, and analyzing data. Exdir facilitates improved data storage, data sharing, reproducible research, and novel insight from interdisciplinary collaboration. With the publication of Exdir, we invite the scientific community to join the development to create an open specification that will serve as many needs as possible and as a foundation for open access to and exchange of data.

Database Quality and Access Issues Relevant to Research Using Anesthesia Information Management System Data.

PubMed

Epstein, Richard H; Dexter, Franklin

2018-07-01

For this special article, we reviewed the computer code, used to extract the data, and the text of all 47 studies published between January 2006 and August 2017 using anesthesia information management system (AIMS) data from Thomas Jefferson University Hospital (TJUH). Data from this institution were used in the largest number (P = .0007) of papers describing the use of AIMS published in this time frame. The AIMS was replaced in April 2017, making this finite sample finite. The objective of the current article was to identify factors that made TJUH successful in publishing anesthesia informatics studies. We examined the structured query language used for each study to examine the extent to which databases outside of the AIMS were used. We examined data quality from the perspectives of completeness, correctness, concordance, plausibility, and currency. Our results were that most could not have been completed without external database sources (36/47, 76.6%; P = .0003 compared with 50%). The operating room management system was linked to the AIMS and was used significantly more frequently (26/36, 72%) than other external sources. Access to these external data sources was provided, allowing exploration of data quality. The TJUH AIMS used high-resolution timestamps (to the nearest 3 milliseconds) and created audit tables to track changes to clinical documentation. Automatic data were recorded at 1-minute intervals and were not editable; data cleaning occurred during analysis. Few paired events with an expected order were out of sequence. Although most data elements were of high quality, there were notable exceptions, such as frequent missing values for estimated blood loss, height, and weight. Some values were duplicated with different units, and others were stored in varying locations. Our conclusions are that linking the TJUH AIMS to the operating room management system was a critical step in enabling publication of multiple studies using AIMS data. Access to this and other external databases by analysts with a high degree of anesthesia domain knowledge was necessary to be able to assess the quality of the AIMS data and ensure that the data pulled for studies were appropriate. For anesthesia departments seeking to increase their academic productivity using their AIMS as a data source, our experiences may provide helpful guidance.

A study of water electrolysis using ionic polymer-metal composite for solar energy storage

NASA Astrophysics Data System (ADS)

Keow, Alicia; Chen, Zheng

2017-04-01

Hydrogen gas can be harvested via the electrolysis of water. The gas is then fed into a proton exchange membrane fuel cell (PEMFC) to produce electricity with clean emission. Ionic polymer-metal composite (IPMC), which is made from electroplating a proton-conductive polymer film called Nafion encourages ion migration and dissociation of water under application of external voltage. This property has been proven to be able to act as catalyst for the electrolysis of pure water. This renewable energy system is inspired by photosynthesis. By using solar panels to gather sunlight as the source of energy, the generation of electricity required to activate the IPMC electrolyser is acquired. The hydrogen gas is collected as storable fuel and can be converted back into energy using a commercial fuel cell. The goal of this research is to create a round-trip energy efficient system which can harvest solar energy, store them in the form of hydrogen gas and convert the stored hydrogen back to electricity through the use of fuel cell with minimal overall losses. The effect of increasing the surface area of contact is explored through etching of the polymer electrolyte membrane (PEM) with argon plasma or manually sanding the surface and how it affects the increase of energy conversion efficiency of the electrolyser. In addition, the relationship between temperature and the IPMC is studied. Experimental results demonstrated that increases in temperature of water and changes in surface area contact correlate with gas generation.

[Study on influence of different storage environments and packaging materials on quality of Citri Reticulatae Pericarpium].

PubMed

Luo, Jiao-Yang; Zhou, Wen-Ju; Li, Kun-Lun; Zhao, Ming; Yang, Mei-Hua

2018-03-01

Traditional Chinese herbs are readily contaminated by mold that produced mycotoxins which are closly related to the herbs' external factors and external environments during the storage process. In this study, Citri Reticulatae Pericarpium was used as example, and the characteristics of traits, water content, active components (naringin, hesperidin, sinensetin, naringin, tangeretin) and the accumulation of aflatoxins (AFs) were selected as the evaluation indexes. Citri Reticulatae Pericarpium was stored under different environments and packaging materials for 12 months, and then the quality changes and mildew of Citri Reticulatae Pericarpium were examined. The results showed that the color of Citri Reticulatae Pericarpium was deepened after storage, but without mildew phenomenon. Besides, the sample storage in kraft paper and woven bags had varying degrees of moth phenomenon after 12 months storage, and the water content exceeded the limit of Chinese Pharmacopoeia. In addition, the contents of the five active constituents obviously decreased, especially for hesperidin, which did not meet the pharmacopoeia standard after storage. AFs were not detected in any of the tested samples. According to the results, we conclude that low temperature and humidity environment is more suitable for the storage of Citri Reticulatae Pericarpium, and that packaging materials should be further investigated. This study is of great significance for preventing the mold to contaminate the traditional Chinese medicine and ensuring the quality, effectiveness and safety of TCMs. Copyright© by the Chinese Pharmaceutical Association.

MEDXVIEWER: PROVIDING A WEB-ENABLED WORKSTATION ENVIRONMENT FOR COLLABORATIVE AND REMOTE MEDICAL IMAGING VIEWING, PERCEPTION STUDIES AND READER TRAINING.

PubMed

Looney, P T; Young, K C; Halling-Brown, M D

2016-06-01

MedXViewer (Medical eXtensible Viewer) has been developed to address the need for workstation-independent, picture archiving and communication system (PACS)-less viewing and interaction with anonymised medical images. The aim of this paper is to describe the design and features of MedXViewer as well as to introduce the new features available in the latest release (version 1.2). MedXViewer currently supports digital mammography and tomosynthesis. The flexible software design used to develop MedXViewer allows it to be easily extended to support other imaging modalities. Regions of interest can be drawn by a user, and any associated information about a mark, an image or a study can be added. The questions and settings can be easily configured depending on the need of the research allowing both ROC and FROC studies to be performed. Complex tree-like questions can be asked where a given answer presents the user to new questions. The hanging protocol can be specified for each study. Panning, windowing, zooming and moving through slices are all available while modality-specific features can be easily enabled, e.g. quadrant zooming in digital mammography and tomosynthesis studies. MedXViewer can integrate with a web-based image database OPTIMAM Medical Image Database allowing results and images to be stored centrally. The software can, alternatively, run without a network connection where the images and results can be encrypted and stored locally on a machine or external drive. MedXViewer has been used for running remote paper-less observer studies and is capable of providing a training infrastructure and coordinating remote collaborative viewing sessions. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Neural bases of prospective memory: a meta-analysis and the "Attention to Delayed Intention" (AtoDI) model.

PubMed

Cona, Giorgia; Scarpazza, Cristina; Sartori, Giuseppe; Moscovitch, Morris; Bisiacchi, Patrizia Silvia

2015-05-01

Remembering to realize delayed intentions is a multi-phase process, labelled as prospective memory (PM), and involves a plurality of neural networks. The present study utilized the activation likelihood estimation method of meta-analysis to provide a complete overview of the brain regions that are consistently activated in each PM phase. We formulated the 'Attention to Delayed Intention' (AtoDI) model to explain the neural dissociation found between intention maintenance and retrieval phases. The dorsal frontoparietal network is involved mainly in the maintenance phase and seems to mediate the strategic monitoring processes, such as the allocation of top-down attention both towards external stimuli, to monitor for the occurrence of the PM cues, and to internal memory contents, to maintain the intention active in memory. The ventral frontoparietal network is recruited in the retrieval phase and might subserve the bottom-up attention captured externally by the PM cues and, internally, by the intention stored in memory. Together with other brain regions (i.e., insula and posterior cingulate cortex), the ventral frontoparietal network would support the spontaneous retrieval processes. The functional contribution of the anterior prefrontal cortex is discussed extensively for each PM phase. Copyright © 2015 Elsevier Ltd. All rights reserved.

Microfluidic Platform for Analyzing the Thermotaxis of C. elegans in a Linear Temperature Gradient.

PubMed

Yoon, Sunhee; Piao, Hailing; Jeon, Tae-Joon; Kim, Sun Min

2017-01-01

Caenorhabditis elegans (C. elegans), which shares a considerable amount of characteristics with human genes is one of the important model organisms for the study of behavioral responses. Thermotaxis is a representative behavior response of C. elegans; C. elegans stores the cultivation temperature in thermosensory neurons and moves to the cultivation temperature region in a temperature variation. In this study, we developed a microfluidic system for effective thermotaxis analysis of C. elegans. The microfluidic channel was fabricated using polydimethylsiloxane (PDMS) by soft lithography process. The temperature gradient (15 - 20°C) was generated in the microchannel and controlled by Peltier modules attached to the bottom of the channel. The thermotaxis of wild type (N2), tax-4(p678) and ttx-7(nj50) mutants were effectively analyzed using this microfluidic system. We believe that this system can be employed as a basic platform for studying the neural circuit of C. elegans responding to external stimuli.

Methods Data Qualification Interim Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. Sam Alessi; Tami Grimmett; Leng Vang

The overall goal of the Next Generation Nuclear Plant (NGNP) Data Management and Analysis System (NDMAS) is to maintain data provenance for all NGNP data including the Methods component of NGNP data. Multiple means are available to access data stored in NDMAS. A web portal environment allows users to access data, view the results of qualification tests and view graphs and charts of various attributes of the data. NDMAS also has methods for the management of the data output from VHTR simulation models and data generated from experiments designed to verify and validate the simulation codes. These simulation models representmore » the outcome of mathematical representation of VHTR components and systems. The methods data management approaches described herein will handle data that arise from experiment, simulation, and external sources for the main purpose of facilitating parameter estimation and model verification and validation (V&V). A model integration environment entitled ModelCenter is used to automate the storing of data from simulation model runs to the NDMAS repository. This approach does not adversely change the why computational scientists conduct their work. The method is to be used mainly to store the results of model runs that need to be preserved for auditing purposes or for display to the NDMAS web portal. This interim report demonstrates the currently development of NDMAS for Methods data and discusses data and its qualification that is currently part of NDMAS.« less

Radon free storage container and method

DOEpatents

Langner, Jr., G. Harold; Rangel, Mark J.

1991-01-01

A radon free containment environment for either short or long term storage of radon gas detectors can be provided as active, passive, or combined active and passive embodiments. A passive embodiment includes a resealable vessel containing a basket capable of holding and storing detectors and an activated charcoal adsorbing liner between the basket and the containment vessel wall. An active embodiment includes the resealable vessel of the passive embodiment, and also includes an external activated charcoal filter that circulates the gas inside the vessel through the activated charcoal filter. An embodiment combining the active and passive embodiments is also provided.

UH-60A External Stores Support System Fixed Provision Fairings Drag Determination

DTIC Science & Technology

1984-05-01

irori I Sif Iii. ,,moin’!1.tIit~l -,v- .v.t m ;Irttiit or oiut poit pon , it ons~ 11 r;i1 Tfre, ion, 1 Aii𔃻u’ of ; i rI Jp ~ur ra f t a ttirue Ptti’b...ltoin in ha I I cenrte red f li ght by refer. n4,41 . ’I e .v ifr.i if Ilateral I cci’ I ercmet er at a p rede te~rmi ntd rCr "’nf I Itr f’ F- rsit or

Status and Prospects of Computational Fluid Dynamics for Unsteady Transonic Viscous Flows.

DTIC Science & Technology

1984-10-01

including external stores) at transonic flight conditions for which viscous effects are important, and to couple these aerodynamic characteristics with the...OBTAINED * EXPENSIVE FOR MANY RUNS * SCALING (VISCOUS EFFECTS , * CHEMICAL NONEQUILIBRIUM. etc.) USE BOTH TOGETHER - ~. om~innta rv -cliD tor aero:nautical...8217onl’-eir ~ nvsc j 963s 1970s Re-averige, * ’aver-71 :J, ’r ’s 1980S t.urb, enr,, (38 Ius* 19805* ~’ii~~ .r **~’, r o nstead; effects ~~~~~~~~~i, trOr

A data analysis expert system for large established distributed databases

NASA Technical Reports Server (NTRS)

Gnacek, Anne-Marie; An, Y. Kim; Ryan, J. Patrick

1987-01-01

A design for a natural language database interface system, called the Deductively Augmented NASA Management Decision support System (DANMDS), is presented. The DANMDS system components have been chosen on the basis of the following considerations: maximal employment of the existing NASA IBM-PC computers and supporting software; local structuring and storing of external data via the entity-relationship model; a natural easy-to-use error-free database query language; user ability to alter query language vocabulary and data analysis heuristic; and significant artificial intelligence data analysis heuristic techniques that allow the system to become progressively and automatically more useful.

USSAERO computer program development, versions B and C

NASA Technical Reports Server (NTRS)

Woodward, F. A.

1980-01-01

Versions B and C of the unified subsonic and supersonic aerodynamic analysis program, USSAERO, are described. Version B incorporates a new symmetrical singularity method to provide improved surface pressure distributions on wings in subsonic flow. Version C extends the range of application of the program to include the analysis of multiple engine nacelles or finned external stores. In addition, nonlinear compressibility effects in high subsonic and supersonic flows are approximated using a correction based on the local Mach number at panel control points. Several examples are presented comparing the results of these programs with other panel methods and experimental data.

Level Flight Performance Evaluation of the UH-60A Helicopter with the Production External Stores Support System and Ferry Tanks Installed

DTIC Science & Technology

1986-09-01

by other authorized documents. 0S. DISPOSITION INSTRUCTIONS ,,Istrh this relprt when it is no longer noded. J)o not retrn it to the orignator. TRADE ...NAMES ’l.The use of trade names in this report does not constitite an official endorsement or approval of the muse of the commuercial hardware and...wwere wa’ measured (°C) Kp 0 U.70 7 pow)ur curreci . ion tactor 1 .6G98 x I Conve rIon f:-L) r (SIIP-I, q/kt 2 -_1) 40 - - - - - ------. Change in

Autonomous momentum management for space station, exhibit A

NASA Technical Reports Server (NTRS)

Hahn, E.

1984-01-01

The report discusses momentum management for the CDG Planar Space Platform. The external torques on the Space Station are assumed to be gravity gradient and aerodynamic with both having bias and cyclic terms. The integrals of the cyclic torques are the cyclic momenti which will be stored in the momentum storage actuator. Various techniques to counteract the bias torques and center the cyclic momentum were investigated including gravity gradient desaturation by adjusting vehicle attitude, aerodynamic desaturation using solar panels and radiators and the deployment of flat plates at the end of long booms generating aerodynamic torques.

Development and Evaluation of a Computer-Based Program for Assessing Quality of Family Medicine Teams Based on Accreditation Standards

PubMed Central

Valjevac, Salih; Ridjanovic, Zoran; Masic, Izet

2009-01-01

CONFLICT OF INTEREST: NONE DECLARED SUMMARY Introduction Agency for healthcare quality and accreditation in Federation of Bosnia and Herzegovina (AKAZ) is authorized body in the field of healthcare quality and safety improvement and accreditation of healthcare institutions. Beside accreditation standards for hospitals and primary health care centers, AKAZ has also developed accreditation standards for family medicine teams. Methods Software development was primarily based on Accreditation Standards for Family Medicine Teams. Seven chapters / topics: (1. Physical factors; 2. Equipment; 3. Organization and Management; 4. Health promotion and illness prevention; 5. Clinical services; 6. Patient survey; and 7. Patient’s rights and obligations) contain 35 standards describing expected level of family medicine team’s quality. Based on accreditation standards structure and needs of different potential users, it was concluded that software backbone should be a database containing all accreditation standards, self assessment and external assessment details. In this article we will present the development of standardized software for self and external evaluation of quality of service in family medicine, as well as plans for the future development of this software package. Conclusion Electronic data gathering and storing enhances the management, access and overall use of information. During this project we came to conclusion that software for self assessment and external assessment is ideal for accreditation standards distribution, their overview by the family medicine team members, their self assessment and external assessment. PMID:24109157

A Probabilistic Assessment Methodology for the Evaluation of Geologic Carbon Dioxide Storage

USGS Publications Warehouse

Brennan, Sean T.; Burruss, Robert A.; Merrill, Matthew D.; Freeman, P.A.; Ruppert, Leslie F.

2010-01-01

In 2007, the Energy Independence and Security Act (Public Law 110-140) authorized the U.S. Geological Survey (USGS) to conduct a national assessment of potential geologic storage resources for carbon dioxide (CO2) in cooperation with the U.S. Environmental Protection Agency and the U.S. Department of Energy. The first year of that activity was specified for development of a methodology to estimate storage potential that could be applied uniformly to geologic formations across the United States. After its release, the methodology was to receive public comment and external expert review. An initial methodology was developed and published in March 2009 (Burruss and others, 2009), and public comments were received. The report was then sent to a panel of experts for external review. The external review report was received by the USGS in December 2009. This report is in response to those external comments and reviews and describes how the previous assessment methodology (Burruss and others, 2009) was revised. The resource that is assessed is the technically accessible storage resource, which is defined as the mass of CO2 that can be stored in the pore volume of a storage formation. The methodology that is presented in this report is intended to be used for assessments at scales ranging from regional to subbasinal in which storage assessment units are defined on the basis of common geologic and hydrologic characteristics. The methodology does not apply to site-specific evaluation of storage resources or capacity.

Container system for enabling commercial production of cryopreserved cell therapy products.

PubMed

Woods, Erik J; Bagchi, Aniruddha; Goebel, W Scott; Vilivalam, Vinod D; Vilivalam, Vinod D

2010-07-01

The expansion of cellular therapeutics will require large-scale manufacturing processes to expand and package cell products, which may not be feasible with current blood-banking bag technology. This study investigated the potential for freezing, storing and shipping cell therapy products using novel pharmaceutical-grade Crystal Zenith((R)) (CZ) plastic vials. CZ vials (0.5, 5 and 30 ml volume) with several closure systems were filled with mesenchymal stem cells and stored at either -85 or -196 degrees C for 6 months. Vials were tested for their ability to maintain cell viability, proliferative and differentiation capacity, as well as durability and integrity utilizing a 1-m drop test. As controls, 2 ml polypropylene vials were investigated under the same conditions. Post-thaw viability utilizing a dye exclusion assay was over 95% in all samples. Stored cells exhibited rapid recovery 2 h post-thaw and cultures were approximately 70% confluent within 5-7 days, consistent with nonfrozen controls and indicative of functional recovery. Doubling times were consistent over all vials. The doubling rate for cells from CZ vials were 2.14 + or - 0.83 days (1 week), 1.84 + or - 0.68 days (1 month) and 1.79 + or - 0.71 days (6 months), which were not significantly different compared with frozen and fresh controls. Cells recovered from the vials exhibited trilineage differentiation consistent with controls. As part of vial integrity via drop testing, no evidence of external damage was found on vial surfaces or on closure systems. Furthermore, the filled vials stored for 6 months were tested for container closure integrity. Vials removed from freezer conditions were transported to the test laboratory on dry ice and tested using pharmaceutical packaging tests, including dye ingress and microbial challenge. The results of all stoppered vials indicated container closure integrity with no failures. Pharmaceutical-grade plastic CZ vials, which are commercially used to package pharmaceutical products, are suitable for low-temperature storage and transport of mesenchymal stem cells, and are a scalable container system for commercial manufacturing and fill-finish operation of cell therapy products.

Chemical Stability of Morphine, Ropivacaine, and Ziconotide in Combination for Intrathecal Analgesia.

PubMed

Robert, Julien; Sorrieul, Jérémy; Rossignol, Elsa; Beaussart, Hélène; Kieffer, Hélène; Folliard, Caroline; Dupoiron, Denis; Devys, Catherine

2017-01-01

Pain is the most feared symptom amongst individuals living with cancer. In 15% to 20% of patients, conventional analgesic therapy either fails to relieve pain or induces adverse effects. Intrathecal drug delivery systems may present an effective alternative for pain management. The Cancerology Center Paul Papin protocol includes an admixture of morphine, ropivacaine, and ziconotide in intrathecal preparations. These drugs are administered by a fully implantable or an external pump. Syringes or polyolefin infusion bags are prepared for refill just before use. Few centers in France use the method of intrathecal analgesia. Therefore, for those patients receiving intrathecal preparations, each filling requires that the patients be transported from their local hospital (or their home) to a referral center where the patients are monitored. They sometimes must travel up to a hundred kilometers to have a pump filled. The preparation and the analytical control of the mixture are carried out only by those centers meeting the proper criteria, which includes the proper equipment. To spare the patient this travel, a peripheral center may be subcontracted to manage the patient's pump refill. No data are available concerning the chemical stability of admixtures in syringes or polyolefin infusion bags. The aim of this study was to evaluate, with a new analytical method using ultra high-performance liquid chromatography, the chemical stability of these admixtures in syringes or in polyolefin infusion bags. Ziconotide 1 µg/mL was combined with ropivacaine (7.5 mg/mL) and morphine (3.5 mg/mL) in syringes at 5°C, 21°C, and 31°C, and in polyolefin infusion bags at 21°C. Assays were performed using ultra high-pressure liquid chromatography. In syringes stored at 21°C and 31°C, concentrations after 6 hours were not in the acceptable criterion of 10% variability. When syringes were stored at 5°C, the residual concentration of ziconotide after 3 days was 100.5% +/- 2.6% [92.7% to 108.4%]. In polyolefin infusion bags, the residual concentration of ziconotide after 14 days was 96.9% +/- 2.2% [90.1% to 103.6%]. This study demonstrates the chemical stability of this admixture in syringes stored at 5°C for 3 days and in polyolefin plastibags stored at 21°C for 14 days. Copyright© by International Journal of Pharmaceutical Compounding, Inc.

Reserpine has a direct action as a calcium antagonist on mammalian smooth muscle cells.

PubMed Central

Casteels, R; Login, I S

1983-01-01

The effects of reserpine on excitation-contraction coupling and 45Ca exchange of smooth muscle cells of the rabbit ear artery and the guinea-pig taenia coli have been studied. Reserpine inhibited the spontaneous mechanical activity of the taenia coli and the force development induced by 59 mM-external K or 10(-5) M-carbachol. In the ear artery reserpine blocked the K-induced contraction but its effect on the contraction elicited by noradrenaline was smaller. At 0.2 mM-Ca, the inhibition of the tonic component of the noradrenaline-induced contraction was more pronounced than that of the phasic component. This reserpine action was fully reversible for the noradrenaline stimulus in the ear artery but less so for K-induced contractions. The inhibitory action on contractions induced in taenia coli by K-rich solution and by carbachol was even less reversible. The analysis of the effect of reserpine on the 45Ca exchange in the ear artery has revealed that it inhibits the increase of the fractional loss induced by K depolarization, but that it does not exert a significant effect on the increased fractional loss induced by 10(-5) M-noradrenaline. Reserpine slows down the filling with 45Ca of the agonist-sensitive store without affecting the steady-state amount of Ca taken up by the store. A study of the degree of filling of the store by measuring the force development and the 45Ca release elicited by noradrenaline in Ca-free medium, reveals that the force development after loading in a reserpine-containing medium remains less than the control, although the same amount of Ca is released from the store. It was shown by using tetrabenazine that the inhibitory action of reserpine on the Ca exchange and the force development is not due to an interaction of reserpine with the receptor molecules that are responsible for its depleting action on aminergic granules. These results strongly suggest that reserpine exerts a Ca antagonistic action on smooth muscle whereby it blocks the potential-dependent channels. However, reserpine also affects the receptor-operated channels to some extent and in addition at a high concentration it seems to exert an unspecific inhibitory action on the contractile system. PMID:6310099

[Determination of death and post-mortem examination on the high seas].

PubMed

Buschmann, Claas T; Tsokos, Michael

2009-01-01

Usually death has to be determined by a physician. Deaths on board of ocean-going vessels confront the crew with special challenges, as on the high seas--especially in the container and cargo ship business--often no physician will be available and death has to be determined by medical laymen such as the captain or the medical officer. To document the determination of death, a "Provisional Certificate of Death on the High Seas" is presented. Moreover, an algorithm "Provisional Post-Mortem Examination on the High Seas" is presented to document the results and the practical performance of the external post-mortem examination by medical laymen on a ship. With the help of concrete procedural instructions medical laymen on board of sea-going vessels are to be enabled to determine the death of a human being beyond doubt, to perform a preliminary external post-mortem examination and to store the corpse according to forensic requirements until the ship reaches a port and the body is delivered to the harbour physician.

The development of a containment vessel and Dewar for the particle astrophysics magnet facility (ASTROMAG)

NASA Technical Reports Server (NTRS)

1985-01-01

The ASTROMAG facility is the heart of a large charged particle detection and resolution system. ASTROMAG utilizes a superconducting magnet consisting of a large superconducting magnet coil with a stored magnetic energy of approximately 15 MJ. The active coil will have a mass of 1200 kg. This magnet will be cooled by a cryostat using a liquid helium Dewar for storage. The cryostat will have a series of gas-cooled shields with an external guard vacuum shield and an internal Dewar. The magnet and cryostat will be designed for shuttle or Delta launch and will be designed to withstand the internal pressure of expanded helium under full quench conditions when venting is prevented. The external guard vacuum shell is required to maintain a vacuum for Earth based testing and for cold launch of the cryostat and magnet. The magnet is designed to operate at 4.4 K with a peak field of 7.0 tesla. The superconducting material within the magnet is niobium titanium in a conductive matrix.

E-cigarette marketing in UK stores: an observational audit and retailers' views.

PubMed

Eadie, D; Stead, M; MacKintosh, A M; MacDonald, L; Purves, R; Pearce, J; Tisch, C; van der Sluijis, W; Amos, A; MacGregor, A; Haw, S

2015-09-11

To explore how e-cigarettes are being promoted at point of sale in the UK and how retailers perceive market trends. Fixed retail outlets subject to a ban on the display of tobacco products. Observational audit of all stores selling tobacco products (n=96) in 4 Scottish communities, conducted over 2 waves 12 months apart (2013-2014), and qualitative interviews with small retailers (n=25) in 4 matched communities. The audit measured e-cigarette display characteristics, advertising materials and proximity to other products, and differences by area-level disadvantage. Interviews explored retailers' perceptions of e-cigarette market opportunities and risks, and customer responses. The number of e-cigarette point-of-sale display units and number of brands displayed increased between waves. E-cigarettes were displayed close to products of interest to children in 36% of stores. Stores in more affluent areas were less likely to have external e-cigarette advertising than those in deprived areas. Although e-cigarettes delivered high profit margins, retailers were confused by the diversity of brands and products, and uncertain of the sector's viability. Some customers were perceived to purchase e-cigarettes as cessation aids, and others, particularly low-income smokers, as a cheaper adjunct to conventional tobacco. E-cigarette point-of-sale displays and number of brands displayed increased over 12 months, a potential cause for concern given their lack of regulation. Further scrutiny is needed of the content and effects of such advertising, and the potentially normalising effects of placing e-cigarettes next to products of interest to children. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

E-cigarette marketing in UK stores: an observational audit and retailers’ views

PubMed Central

Eadie, D; Stead, M; MacKintosh, A M; MacDonald, L; Purves, R; Pearce, J; Tisch, C; van der Sluijis, W; Amos, A; MacGregor, A; Haw, S

2015-01-01

Objectives To explore how e-cigarettes are being promoted at point of sale in the UK and how retailers perceive market trends. Setting Fixed retail outlets subject to a ban on the display of tobacco products. Participants Observational audit of all stores selling tobacco products (n=96) in 4 Scottish communities, conducted over 2 waves 12 months apart (2013–2014), and qualitative interviews with small retailers (n=25) in 4 matched communities. Primary and secondary outcome measures The audit measured e-cigarette display characteristics, advertising materials and proximity to other products, and differences by area-level disadvantage. Interviews explored retailers’ perceptions of e-cigarette market opportunities and risks, and customer responses. Results The number of e-cigarette point-of-sale display units and number of brands displayed increased between waves. E-cigarettes were displayed close to products of interest to children in 36% of stores. Stores in more affluent areas were less likely to have external e-cigarette advertising than those in deprived areas. Although e-cigarettes delivered high profit margins, retailers were confused by the diversity of brands and products, and uncertain of the sector's viability. Some customers were perceived to purchase e-cigarettes as cessation aids, and others, particularly low-income smokers, as a cheaper adjunct to conventional tobacco. Conclusions E-cigarette point-of-sale displays and number of brands displayed increased over 12 months, a potential cause for concern given their lack of regulation. Further scrutiny is needed of the content and effects of such advertising, and the potentially normalising effects of placing e-cigarettes next to products of interest to children. PMID:26362665

An observational study of retail availability and in-store marketing of e-cigarettes in London: potential to undermine recent tobacco control gains?

PubMed Central

Hsu, Robert; Myers, Allison E; Ribisl, Kurt M; Marteau, Theresa M

2013-01-01

Objectives E-cigarette companies and vendors claim the potential of e-cigarettes to help smokers reduce or quit tobacco use. E-cigarettes also have the potential to renormalise smoking. The purpose of this study was to describe the availability and in-store marketing of e-cigarettes in London, UK stores selling tobacco and alcohol. Design Observational study. Setting Small and large stores selling alcohol and tobacco in London, UK. Primary and secondary outcome measures The number of stores selling e-cigarettes, the number of stores with an interior or exterior e-cigarette advertisement, the number of stores with an e-cigarette point-of-sale movable display, store size, deprivation index score for store's corresponding lower super output area. Results Audits were completed in 108 of 128 selected stores. 62 of the audited stores (57%) sold e-cigarettes. E-cigarette availability was unrelated to store size. There was a statistically non-significant trend towards increased availability in more deprived areas (p=0.069). 31 of the 62 stores (50%) selling e-cigarettes had a point-of-sale movable display, with all but one found in small stores. Two small stores had interior advertisements and eight had exterior advertisements. No advertisements were observed in large stores. Conclusions This audit revealed widespread availability of e-cigarettes and in-store marketing in London, UK. Even if e-cigarettes prove to be an effective cessation aid, their sale and use are resulting in an increasing public presence of cigarette-like images and smoking behaviour. After decades of work to denormalise smoking, these findings raise the question of whether e-cigarettes are renormalising smoking. PMID:24366581

Chloride currents activated by caffeine in rat intestinal smooth muscle cells.

PubMed Central

Ohta, T; Ito, S; Nakazato, Y

1993-01-01

1. Current responses to caffeine in single smooth muscle cells isolated from rat intestine were studied with the whole-cell patch clamp technique. Intracellular calcium concentration, [Ca2+]i, was simultaneously monitored with fura-2 (0.1 mM) introduced into the cell through a patch pipette. 2. With a potassium-containing pipette solution, caffeine (10 mM) produced an outward current at a holding potential of 0 mV and an inward current at -60 mV, both of which were accompanied by parallel increases in [Ca2+]i. The outward current response disappeared after the removal of K+ from pipette solutions, indicating that caffeine activates a Ca(2+)-activated K+ conductance. 3. When NaCl was present in both pipette and external solutions as the major constituent, caffeine evoked an inward current at -60 mV simultaneously with a rise in [Ca2+]i. The reversal potential (Er) of this current was about 0 mV. 4. Substitution of Tris+ or choline+ for external Na+ did not alter the Er. When external Cl- was replaced by thiocyanate-, iodide- or glutamate-, the Er changed to respectively -55, -38 and +35 mV. 5. The current response to caffeine decreased with increasing concentration of EGTA in the pipette solution. The caffeine-induced current and the intracellular Ca2+ transient was still observed for a few minutes after exposure of the cells to Ca(2+)-free external solution containing 2 mM EGTA. Caffeine failed to produce an inward current and Ca2+ transient after treatment with extracellular ryanodine. 6. It is concluded that caffeine caused an increase in membrane Cl- conductance and in K+ conductance resulting from a rise in [Ca2+]i derived from ryanodine-sensitive intracellular Ca2+ stores in isolated smooth muscle cells of the rat intestine. PMID:8229831

Advanced Data Format (ADF) Software Library and Users Guide

NASA Technical Reports Server (NTRS)

Smith, Matthew; Smith, Charles A. (Technical Monitor)

1998-01-01

The "CFD General Notation System" (CGNS) consists of a collection of conventions, and conforming software, for the storage and retrieval of Computational Fluid Dynamics (CFD) data. It facilitates the exchange of data between sites and applications, and helps stabilize the archiving of aerodynamic data. This effort was initiated in order to streamline the procedures in exchanging data and software between NASA and its customers, but the goal is to develop CGNS into a National Standard for the exchange of aerodynamic data. The CGNS development team is comprised of members from Boeing Commercial. Airplane Group, NASA-Ames, NASA-Langley, NASA-Lewis, McDonnell-Douglas Corporation (now Boeing-St. Louis), Air Force-Wright Lab., and ICEM-CFD Engineering. The elements of CGNS address all activities associated with the storage of data on external media and its movement to and from application programs. These elements include: 1) The Advanced Data Format (ADF) Database manager, consisting of both a file format specification and its 1/0 software, which handles the actual reading and writing of data from and to external storage media; 2) The Standard Interface Data Structures (SIDS), which specify the intellectual content of CFD data and the conventions governing naming and terminology; 3) The SIDS-to-ADF File Mapping conventions, which specify the exact location where the CFD data defined by the SIDS is to be stored within the ADF file(s); and 4) The CGNS Mid-level Library, which provides CFD-knowledgeable routines suitable for direct installation into application codes. The ADF is a generic database manager with minimal intrinsic capability. It was written for the purpose of storing large numerical datasets in an efficient, platform independent manner. To be effective, it must be used in conjunction with external agreements on how the data will be organized within the ADF database such defined by the SIDS. There are currently 34 user callable functions that comprise the ADF Core library and are described in the Users Guide. The library is written in C, but each function has a FORTRAN counterpart.

High-Resolution Uitra Low Power, Intergrated Aftershock and Microzonation System

NASA Astrophysics Data System (ADS)

Passmore, P.; Zimakov, L. G.

2012-12-01

Rapid Aftershock Mobilization plays an essential role in the understanding of both focal mechanism and rupture propagation caused by strong earthquakes. A quick assessment of the data provides a unique opportunity to study the dynamics of the entire earthquake process in-situ. Aftershock study also provides practical information for local authorities regarding the post earthquake activity, which is very important in order to conduct the necessary actions for public safety in the area affected by the strong earthquake. Refraction Technology, Inc. has developed a self-contained, fully integrated Aftershock System, model 160-03, providing the customer simple and quick deployment during aftershock emergency mobilization and microzonation studies. The 160-03 has no external cables or peripheral equipment for command/control and operation in the field. The 160-03 contains three major components integrated in one case: a) 24-bit resolution state-of-the art low power ADC with CPU and Lid interconnect boards; b) power source; and c) three component 2 Hz sensors (two horizontals and one vertical), and built-in ±4g accelerometer. Optionally, the 1 Hz sensors can be built-in the 160-03 system at the customer's request. The self-contained rechargeable battery pack provides power autonomy up to 7 days during data acquisition at 200 sps on continuous three weak motion and triggered three strong motion recording channels. For longer power autonomy, the 160-03 Aftershock System battery pack can be charged from an external source (solar power system). The data in the field is recorded to a built-in swappable USB flash drive. The 160-03 configuration is fixed based on a configuration file stored on the system, so no external command/control interface is required for parameter setup in the field. For visual control of the system performance in the field, the 160-03 has a built-in LED display which indicates the systems recording status as well as a hot swappable USB drive and battery status. The detailed specifications and performance are presented and discussed.;

No meaningful association of neighborhood food store availability with dietary intake, body mass index, or waist circumference in young Japanese women.

PubMed

Murakami, Kentaro; Sasaki, Satoshi; Takahashi, Yoshiko; Uenishi, Kazuhiro

2010-08-01

The affordability of food is considered as an important factor influencing people's diet and hence health status. The objective of this cross-sectional study was to test the hypothesis that neighborhood food store availability is associated with some aspects of dietary intake and thus possibly with body mass index (BMI) and waist circumference in young Japanese women. Subjects were 989 female Japanese dietetic students 18 to 22 years of age. Neighborhood food store availability was defined as the number of food stores within a 0.5-mile (0.8-km) radius of residence (meat stores, fish stores, fruit and vegetable stores, confectionery stores/bakeries, rice stores, convenience stores, and supermarkets/grocery stores). Dietary intake was estimated using a validated, comprehensive self-administered diet history questionnaire. No association was seen between any measure of neighborhood food store availability and dietary intake, except for a positive association between confectionery and bread availability (based on confectionery stores/bakeries, convenience stores, and supermarkets/grocery stores) and intake of these items (P for trend = .02). Further, no association was seen for BMI or waist circumference, except for an inverse relationship between availability of convenience stores and BMI and a positive relationship between store availability for meat (meat stores and supermarkets/grocery stores) and fish (fish stores and supermarkets/grocery stores) and waist circumference. In conclusion, this study of young Japanese women found no meaningful association between neighborhood food store availability and dietary intake, BMI, or waist circumference, with the exception of a positive relationship between availability and intake for confectionery and bread. Copyright © 2010 Elsevier Inc. All rights reserved.

PSI:Biology-Materials Repository: A Biologist’s Resource for Protein Expression Plasmids

PubMed Central

Cormier, Catherine Y.; Park, Jin G.; Fiacco, Michael; Steel, Jason; Hunter, Preston; Kramer, Jason; Singla, Rajeev; LaBaer, Joshua

2011-01-01

The Protein Structure Initiative:Biology-Materials Repository (PSI:Biology-MR; MR; http://psimr.asu.edu) sequence-verifies, annotates, stores, and distributes the protein expression plasmids and vectors created by the Protein Structure Initiative (PSI). The MR has developed an informatics and sample processing pipeline that manages this process for thousands of samples per month from nearly a dozen PSI centers. DNASU (http://dnasu.asu.edu), a freely searchable database, stores the plasmid annotations, which include the full-length sequence, vector information, and associated publications for over 130,000 plasmids created by our laboratory, by the PSI and other consortia, and by individual laboratories for distribution to researchers worldwide. Each plasmid links to external resources, including the PSI Structural Biology Knowledgebase (http://sbkb.org), which facilitates cross-referencing of a particular plasmid to additional protein annotations and experimental data. To expedite and simplify plasmid requests, the MR uses an expedited material transfer agreement (EP-MTA) network, where researchers from network institutions can order and receive PSI plasmids without institutional delays. Currently over 39,000 protein expression plasmids and 78 empty vectors from the PSI are available upon request from DNASU. Overall, the MR’s repository of expression-ready plasmids, its automated pipeline, and the rapid process for receiving and distributing these plasmids more effectively allows the research community to dissect the biological function of proteins whose structures have been studied by the PSI. PMID:21360289

Study of the effect of atmosphere modification in conjunction with honey on the extent of shelf life of Greek bakery delicacy "touloumpaki".

PubMed

Arvanitoyannis, Ioannis S; Bosinas, Konstantinos P; Bouletis, Achilleas D; Gkagtzis, Dimitrios C; Hadjichristodoulou, Christos; Papaloucas, C

2011-12-01

The aim of the present work was to evaluate the effect of atmosphere modification on microbial (mesophiles, yeast and molds) qualities, color, pH, texture and water activity of the Greek bakery product "touloumpaki". Samples were stored under MAP (60% CO(2)) either alone or with the addition of honey syrup for 16 days at room temperature (22-24 °C). Texture was better maintained under MAP and the addition of honey prevented the increase of shear force needed (1.498 and 3.20 for samples with and without honey). Honey inhibited the growth of yeasts on samples stored under MAP (1.6 and 2.02 log CFU/g for samples under MAP with and without honey respectively) while multivariant analysis showed that MAP and honey acted synergistically in confining yeasts. Presence of honey restrained the mesophilic growth until the end of storage period (5.21 and 4.29 log CFU/g for MAP and control samples respectively) while MAP did not have any beneficial effect. Water activity (a(W) < 0.754) was strongly associated with reduced mesophile growth. Lightness values showed a significant decrease during time with no significant changes among treatments in both internal layers and external surface of the product. Copyright © 2011 Elsevier Ltd. All rights reserved.

Efficient Queries of Stand-off Annotations for Natural Language Processing on Electronic Medical Records.

PubMed

Luo, Yuan; Szolovits, Peter

2016-01-01

In natural language processing, stand-off annotation uses the starting and ending positions of an annotation to anchor it to the text and stores the annotation content separately from the text. We address the fundamental problem of efficiently storing stand-off annotations when applying natural language processing on narrative clinical notes in electronic medical records (EMRs) and efficiently retrieving such annotations that satisfy position constraints. Efficient storage and retrieval of stand-off annotations can facilitate tasks such as mapping unstructured text to electronic medical record ontologies. We first formulate this problem into the interval query problem, for which optimal query/update time is in general logarithm. We next perform a tight time complexity analysis on the basic interval tree query algorithm and show its nonoptimality when being applied to a collection of 13 query types from Allen's interval algebra. We then study two closely related state-of-the-art interval query algorithms, proposed query reformulations, and augmentations to the second algorithm. Our proposed algorithm achieves logarithmic time stabbing-max query time complexity and solves the stabbing-interval query tasks on all of Allen's relations in logarithmic time, attaining the theoretic lower bound. Updating time is kept logarithmic and the space requirement is kept linear at the same time. We also discuss interval management in external memory models and higher dimensions.

Mic Flocks in the Cloud: Harnessing Mobile Ubiquitous Sensor Networks

NASA Astrophysics Data System (ADS)

Garces, M. A.; Christe, A.

2015-12-01

Smartphones provide a commercial, off-the-shelf solution to capture, store, analyze, and distribute infrasound using on-board or external microphones (mics) as well as on-board barometers. Free iOS infrasound apps can be readily downloaded from the Apple App Store, and Android versions are in progress. Infrasound propagates for great distances, has low sample rates, and provides a tractable pilot study scenario for open distributed sensor networks at regional and global scales using one of the most ubiquitous sensors on Earth - microphones. Data collection is no longer limited to selected vendors at exclusive prices: anybody on Earth can record and stream infrasound, and the diversity of recording systems and environments is rapidly expanding. Global deployment may be fast and easy (www.redvox.io), but comes with the cost of increasing data volume, velocity, variety, and complexity. Flocking - the collective motion of mobile agents - is a natural human response to threats or events of interest. Anticipating, modeling and harnessing flocking sensor topologies will be necessary for adaptive array and network processing. The increasing data quantity and complexity will exceed the processing capacity of human analysts and most research servers. We anticipate practical real-time applications will require the on-demand adaptive scalability and resources of the Cloud. Cloud architectures for such heterogeneous sensor networks will consider eventual integration into the Global Earth Observation System of Systems (GEOSS).

Efficient Queries of Stand-off Annotations for Natural Language Processing on Electronic Medical Records

PubMed Central

Luo, Yuan; Szolovits, Peter

2016-01-01

In natural language processing, stand-off annotation uses the starting and ending positions of an annotation to anchor it to the text and stores the annotation content separately from the text. We address the fundamental problem of efficiently storing stand-off annotations when applying natural language processing on narrative clinical notes in electronic medical records (EMRs) and efficiently retrieving such annotations that satisfy position constraints. Efficient storage and retrieval of stand-off annotations can facilitate tasks such as mapping unstructured text to electronic medical record ontologies. We first formulate this problem into the interval query problem, for which optimal query/update time is in general logarithm. We next perform a tight time complexity analysis on the basic interval tree query algorithm and show its nonoptimality when being applied to a collection of 13 query types from Allen’s interval algebra. We then study two closely related state-of-the-art interval query algorithms, proposed query reformulations, and augmentations to the second algorithm. Our proposed algorithm achieves logarithmic time stabbing-max query time complexity and solves the stabbing-interval query tasks on all of Allen’s relations in logarithmic time, attaining the theoretic lower bound. Updating time is kept logarithmic and the space requirement is kept linear at the same time. We also discuss interval management in external memory models and higher dimensions. PMID:27478379

Energy harvesting efficiency of piezoelectric polymer film with graphene and metal electrodes.

PubMed

Park, Sanghoon; Kim, Yura; Jung, Hyosub; Park, Jun-Young; Lee, Naesung; Seo, Yongho

2017-12-11

In this study, we investigated an energy harvesting effect of tensile stress using piezoelectric polymers and flexible electrodes. A chemical-vapor-deposition grown graphene film was transferred onto both sides of the PVDF and P(VDF-TrFE) films simultaneously by means of a conventional wet chemical method. Output voltage induced by sound waves was measured and analyzed when a mechanical tension was applied to the device. Another energy harvester was made with a metallic electrode, where Al and Ag were deposited by using an electron-beam evaporator. When acoustic vibrations (105 dB) were applied to the graphene/PVDF/graphene device, an induced voltage of 7.6 V pp was measured with a tensile stress of 1.75 MPa, and this was increased up to 9.1 V pp with a stress of 2.18 MPa for the metal/P(VDF-TrFE)/metal device. The 9 metal/PVDF/metal layers were stacked as an energy harvester, and tension was applied by using springs. Also, we fabricated a full-wave rectifying circuit to store the electrical energy in a 100 μF capacitor, and external vibration generated the electrical charges. As a result, the stored voltage at the capacitor, obtained from the harvester via a bridge diode rectifier, was saturated to ~7.04 V after 180 s charging time.

Investigating energy-saving potentials in the cloud.

PubMed

Lee, Da-Sheng

2014-02-20

Collecting webpage messages can serve as a sensor for investigating the energy-saving potential of buildings. Focusing on stores, a cloud sensor system is developed to collect data and determine their energy-saving potential. The owner of a store under investigation must register online, report the store address, area, and the customer ID number on the electric meter. The cloud sensor system automatically surveys the energy usage records by connecting to the power company website and calculating the energy use index (EUI) of the store. Other data includes the chain store check, company capital, location price, and the influence of weather conditions on the store; even the exposure frequency of store under investigation may impact the energy usage collected online. After collecting data from numerous stores, a multi-dimensional data array is constructed to determine energy-saving potential by identifying stores with similarity conditions. Similarity conditions refer to analyzed results that indicate that two stores have similar capital, business scale, weather conditions, and exposure frequency on web. Calculating the EUI difference or pure technical efficiency of stores, the energy-saving potential is determined. In this study, a real case study is performed. An 8-dimensional (8D) data array is constructed by surveying web data related to 67 stores. Then, this study investigated the savings potential of the 33 stores, using a site visit, and employed the cloud sensor system to determine the saving potential. The case study results show good agreement between the data obtained by the site visit and the cloud investigation, with errors within 4.17%. Among 33 the samples, eight stores have low saving potentials of less than 5%. The developed sensor on the cloud successfully identifies them as having low saving potential and avoids wasting money on the site visit.

Investigating Energy-Saving Potentials in the Cloud

PubMed Central

Lee, Da-Sheng

2014-01-01

Collecting webpage messages can serve as a sensor for investigating the energy-saving potential of buildings. Focusing on stores, a cloud sensor system is developed to collect data and determine their energy-saving potential. The owner of a store under investigation must register online, report the store address, area, and the customer ID number on the electric meter. The cloud sensor system automatically surveys the energy usage records by connecting to the power company website and calculating the energy use index (EUI) of the store. Other data includes the chain store check, company capital, location price, and the influence of weather conditions on the store; even the exposure frequency of store under investigation may impact the energy usage collected online. After collecting data from numerous stores, a multi-dimensional data array is constructed to determine energy-saving potential by identifying stores with similarity conditions. Similarity conditions refer to analyzed results that indicate that two stores have similar capital, business scale, weather conditions, and exposure frequency on web. Calculating the EUI difference or pure technical efficiency of stores, the energy-saving potential is determined. In this study, a real case study is performed. An 8-dimensional (8D) data array is constructed by surveying web data related to 67 stores. Then, this study investigated the savings potential of the 33 stores, using a site visit, and employed the cloud sensor system to determine the saving potential. The case study results show good agreement between the data obtained by the site visit and the cloud investigation, with errors within 4.17%. Among 33 the samples, eight stores have low saving potentials of less than 5%. The developed sensor on the cloud successfully identifies them as having low saving potential and avoids wasting money on the site visit. PMID:24561405

Structure from Motion Photogrammetry and Micro X-Ray Computed Tomography 3-D Reconstruction Data Fusion for Non-Destructive Conservation Documentation of Lunar Samples

NASA Technical Reports Server (NTRS)

Beaulieu, K. R.; Blumenfeld, E. H.; Liddle, D. A.; Oshel, E. R.; Evans, C. A.; Zeigler, R. A.; Righter, K.; Hanna, R. D.; Ketcham, R. A.

2017-01-01

Our team is developing a modern, cross-disciplinary approach to documentation and preservation of astromaterials, specifically lunar and meteorite samples stored at the Johnson Space Center (JSC) Lunar Sample Laboratory Facility. Apollo Lunar Sample 60639, collected as part of rake sample 60610 during the 3rd Extra-Vehicular Activity of the Apollo 16 mission in 1972, served as the first NASA-preserved lunar sample to be examined by our team in the development of a novel approach to internal and external sample visualization. Apollo Sample 60639 is classified as a breccia with a glass-coated side and pristine mare basalt and anorthosite clasts. The aim was to accurately register a 3-dimensional Micro X-Ray Computed Tomography (XCT)-derived internal composition data set and a Structure-From-Motion (SFM) Photogrammetry-derived high-fidelity, textured external polygonal model of Apollo Sample 60639. The developed process provided the means for accurate, comprehensive, non-destructive visualization of NASA's heritage lunar samples. The data products, to be ultimately served via an end-user web interface, will allow researchers and the public to interact with the unique heritage samples, providing a platform to "slice through" a photo-realistic rendering of a sample to analyze both its external visual and internal composition simultaneously.

Magnetic field effect on growth, arsenic uptake, and total amylolytic activity on mesquite (Prosopis juliflora x P. velutina) seeds

NASA Astrophysics Data System (ADS)

Flores-Tavizón, Edith; Mokgalaka-Matlala, Ntebogeng S.; Elizalde Galindo, José T.; Castillo-Michelle, Hiram; Peralta-Videa, Jose R.; Gardea-Torresdey, Jorge L.

2012-04-01

Magnetic field is closely related to the cell metabolism of plants [N. A. Belyavskaya, Adv. Space Res. 34, 1566 (2004)]. In order to see the effect of magnetic field on the plant growth, arsenic uptake, and total amylolytic activity of mesquite (Prosopis juliflora x P. velutina) seeds, ten sets of 80 seeds were selected to be oriented with the long axis parallel or randomly oriented to an external magnetic field. The external magnetic field magnitude was 1 T, and the exposition time t = 30 min. Then, the seeds were stored for three days in a plastic bag and then sown on paper towels in a modified Hoagland's nutrient solution. After three days of germination in the dark and three days in light, seedlings were grown hydroponically in modified Hoagland's nutrient solution (high PO42-) containing 0, 10, or 20 ppm of arsenic as As (III) and (V). The results show that the germination ratios, growth, elongation, arsenic uptake, and total amylolytic activity of the long axis oriented mesquite seeds were much higher than those of the randomly oriented seeds. Also, these two sets of seeds showed higher properties than the ones that were not exposed to external magnetic field.

An open source web interface for linking models to infrastructure system databases

NASA Astrophysics Data System (ADS)

Knox, S.; Mohamed, K.; Harou, J. J.; Rheinheimer, D. E.; Medellin-Azuara, J.; Meier, P.; Tilmant, A.; Rosenberg, D. E.

2016-12-01

Models of networked engineered resource systems such as water or energy systems are often built collaboratively with developers from different domains working at different locations. These models can be linked to large scale real world databases, and they are constantly being improved and extended. As the development and application of these models becomes more sophisticated, and the computing power required for simulations and/or optimisations increases, so has the need for online services and tools which enable the efficient development and deployment of these models. Hydra Platform is an open source, web-based data management system, which allows modellers of network-based models to remotely store network topology and associated data in a generalised manner, allowing it to serve multiple disciplines. Hydra Platform uses a web API using JSON to allow external programs (referred to as `Apps') to interact with its stored networks and perform actions such as importing data, running models, or exporting the networks to different formats. Hydra Platform supports multiple users accessing the same network and has a suite of functions for managing users and data. We present ongoing development in Hydra Platform, the Hydra Web User Interface, through which users can collaboratively manage network data and models in a web browser. The web interface allows multiple users to graphically access, edit and share their networks, run apps and view results. Through apps, which are located on the server, the web interface can give users access to external data sources and models without the need to install or configure any software. This also ensures model results can be reproduced by removing platform or version dependence. Managing data and deploying models via the web interface provides a way for multiple modellers to collaboratively manage data, deploy and monitor model runs and analyse results.

Analysis and test results for a molten salt thermal energy storage system

NASA Astrophysics Data System (ADS)

Sterrett, R. H.; Scott, O. L.

A system has been developed to provide low cost thermal energy storage using molten salt. It consists of a hot tank to store the 565 C (1050 F) salt and a cold tank to store the 289 C (550 F) salt. The hot tank uses internal insulation protected by a liner to enable the use of a carbon steel shell for structural support. Due to the lower salt temperature, the cold tank can be a carbon steel shell with external insulation. This paper describes an analytical method used to predict the thermal performance of such systems and presents experimental data from a Subsystem Research Experiment (SRE) conducted by Martin Marietta Aerospace, Solar Energy Systems under contract from Sandia National Laboratories, Livermore, CA. The results from three of the SRE test cases are compared with the STS model results. These are (1) steady state operation, (2) concurrent charging and discharging, and (3) transient cooldown. The temperature differences between the analytical and experimental results were less than 10%. The internally insulated hot tank performed well.

Flight design system level C requirements. Solid rocket booster and external tank impact prediction processors. [space transportation system

NASA Technical Reports Server (NTRS)

Seale, R. H.

1979-01-01

The prediction of the SRB and ET impact areas requires six separate processors. The SRB impact prediction processor computes the impact areas and related trajectory data for each SRB element. Output from this processor is stored on a secure file accessible by the SRB impact plot processor which generates the required plots. Similarly the ET RTLS impact prediction processor and the ET RTLS impact plot processor generates the ET impact footprints for return-to-launch-site (RTLS) profiles. The ET nominal/AOA/ATO impact prediction processor and the ET nominal/AOA/ATO impact plot processor generate the ET impact footprints for non-RTLS profiles. The SRB and ET impact processors compute the size and shape of the impact footprints by tabular lookup in a stored footprint dispersion data base. The location of each footprint is determined by simulating a reference trajectory and computing the reference impact point location. To insure consistency among all flight design system (FDS) users, much input required by these processors will be obtained from the FDS master data base.

BioModels Database: a repository of mathematical models of biological processes.

PubMed

Chelliah, Vijayalakshmi; Laibe, Camille; Le Novère, Nicolas

2013-01-01

BioModels Database is a public online resource that allows storing and sharing of published, peer-reviewed quantitative, dynamic models of biological processes. The model components and behaviour are thoroughly checked to correspond the original publication and manually curated to ensure reliability. Furthermore, the model elements are annotated with terms from controlled vocabularies as well as linked to relevant external data resources. This greatly helps in model interpretation and reuse. Models are stored in SBML format, accepted in SBML and CellML formats, and are available for download in various other common formats such as BioPAX, Octave, SciLab, VCML, XPP and PDF, in addition to SBML. The reaction network diagram of the models is also available in several formats. BioModels Database features a search engine, which provides simple and more advanced searches. Features such as online simulation and creation of smaller models (submodels) from the selected model elements of a larger one are provided. BioModels Database can be accessed both via a web interface and programmatically via web services. New models are available in BioModels Database at regular releases, about every 4 months.

Clinical Documents: Attribute-Values Entity Representation, Context, Page Layout And Communication

PubMed Central

Lovis, Christian; Lamb, Alexander; Baud, Robert; Rassinoux, Anne-Marie; Fabry, Paul; Geissbühler, Antoine

2003-01-01

This paper presents how acquisition, storage and communication of clinical documents are implemented at the University Hospitals of Geneva. Careful attention has been given to user-interfaces, in order to support complex layouts, spell checking, templates management with automatic prefilling in order to facilitate acquisition. A dual architecture has been developed for storage using an attributes-values entity unified database and a consolidated, patient-centered, layout-respectful files-based storage, providing both representation power and sinsert (peed of accesses. This architecture allows great flexibility to store a continuum of data types from simple type values up to complex clinical reports. Finally, communication is entirely based on HTTP-XML internally and a HL-7 CDA interface V2 is currently studied for external communication. Some of the problem encountered, mostly concerning the typology of documents and the ontology of clinical attributes are evoked. PMID:14728202

Physico-chemical and sensory evaluation of potato (Solanum tuberosum L.) after irradiation.

PubMed

Soares, Ivanesa G M; Silva, Edvane B; Amaral, Ademir J; Machado, Erilane C L; Silva, Josenilda M

2016-06-07

This work evaluated the effects of ionizing radiation on the physico-chemical and sensory characteristics of the potato cultivar Ágata (Solanum tuberosum L.), including budding and deterioration, with the end goal of increasing shelf life. For this, four groups of samples were harvested at the maturation stage. Three of them were separately exposed to a Co-60 source, receiving respective doses of 0.10, 0.15 and 2.00 kGy, while the non-irradiated group was kept as a control. All samples were stored for 35 days at 24 °C (± 2) and at 39% relative humidity. The following aspects were evaluated: budding, rot, loss of weight, texture, flesh color, moisture, external and internal appearance, aroma, soluble solids, titratable acidity, vitamin C, protein, starch and glucose. The results indicated that 0.15 kGy was the most effective dose to reduce sprouting and post-harvest losses, under the conditions studied.

Giant switchable Rashba effect in oxide heterostructures

DOE PAGES

Zhong, Zhicheng; Si, Liang; Zhang, Qinfang; ...

2015-03-01

One of the most fundamental phenomena and a reminder of the electron’s relativistic nature is the Rashba spin splitting for broken inversion symmetry. Usually this splitting is a tiny relativistic correction. Interfacing ferroelectric BaTiO₃ and a 5d (or 4d) transition metal oxide with a large spin-orbit coupling, Ba(Os,Ir,Ru)O₃, we show that giant Rashba spin splittings are indeed possible and even controllable by an external electric field. Based on density functional theory and a microscopic tight binding understanding, we conclude that the electric field is amplified and stored as a ferroelectric Ti-O distortion which, through the network of oxygen octahedra, inducesmore » a large (Os,Ir,Ru)-O distortion. The BaTiO₃/Ba(Os,Ru,Ir)O₃ heterostructure is hence the ideal test station for switching and studying the Rashba effect and allows applications at room temperature.« less

Application of near-infrared image processing in agricultural engineering

NASA Astrophysics Data System (ADS)

Chen, Ming-hong; Zhang, Guo-ping; Xia, Hongxing

2009-07-01

Recently, with development of computer technology, the application field of near-infrared image processing becomes much wider. In this paper the technical characteristic and development of modern NIR imaging and NIR spectroscopy analysis were introduced. It is concluded application and studying of the NIR imaging processing technique in the agricultural engineering in recent years, base on the application principle and developing characteristic of near-infrared image. The NIR imaging would be very useful in the nondestructive external and internal quality inspecting of agricultural products. It is important to detect stored-grain insects by the application of near-infrared spectroscopy. Computer vision detection base on the NIR imaging would be help to manage food logistics. Application of NIR imaging promoted quality management of agricultural products. In the further application research fields of NIR image in the agricultural engineering, Some advices and prospect were put forward.

Searching Online Chemical Data Repositories via the ChemAgora Portal.

PubMed

Zanzi, Antonella; Wittwehr, Clemens

2017-12-26

ChemAgora, a web application designed and developed in the context of the "Data Infrastructure for Chemical Safety Assessment" (diXa) project, provides search capabilities to chemical data from resources available online, enabling users to cross-reference their search results with both regulatory chemical information and public chemical databases. ChemAgora, through an on-the-fly search, informs whether a chemical is known or not in each of the external data sources and provides clikable links leading to the third-party web site pages containing the information. The original purpose of the ChemAgora application was to correlate studies stored in the diXa data warehouse with available chemical data. Since the end of the diXa project, ChemAgora has evolved into an independent portal, currently accessible directly through the ChemAgora home page, with improved search capabilities of online data sources.

An experimental investigation of the impingement of a planar shock wave on an axisymmetric body at Mach 3

NASA Technical Reports Server (NTRS)

Brosh, A.; Kussoy, M. I.

1983-01-01

An experimental study of the flow caused by a planar shock wave impinging obliquely on a cylinder is presented. The complex three dimensional shock wave and boundary layer interaction occurring in practical problems, such as the shock wave impingement from the shuttle nose on an external fuel tank, and store carriage interference on a supersonic tactical aircraft were investigated. A data base for numerical computations of complex flows was also investigated. The experimental techniques included pressure measurements and oil flow patterns on the surface of the cylinder, and shadowgraphs and total and static pressure surveys on the leeward and windward planes of symmetry. The complete data is presented in tabular form. The results reveal a highly complex flow field with two separation zones, regions of high crossflow, and multiple reflected shocks and expansion fans.

[Alexithymia and automatic activation of emotional-evaluative information].

PubMed

Suslow, T; Arolt, V; Junghanns, K

1998-05-01

The emotional valence of stimuli seems to be stored in the associative network and is automatically activated on the mere observation of a stimulus. A principal characteristic of alexithymia represents the difficulty to symbolize emotions verbally. The present study examines the relationship between the dimensions of the alexithymia construct and emotional priming effects in a word-word paradigma. The 20-Item Toronto Alexithymia Scale was administered to 32 subjects along with two word reading tasks as measures of emotional and semantic priming effects. The subscale "difficulty describing feelings" correlated as expected negatively with the negative inhibition effect. The subscale "externally oriented thinking" tended to correlate negatively with the negative facilitation effect. Thus, these dimensions of alexithymia are inversely related to the degree of automatic emotional priming. In summary, there is evidence for an impaired structural integration of emotion and language in persons with difficulties in describing feelings. Poor "symbolization" of emotions in alexithymia is discussed from a cognitive perspective.

Influence of gamma irradiation and benzyl adenine on keeping quality of custard apple fruits during storage.

PubMed

Chouksey, Swati; Singh, Alpana; Thakur, Rajendra Singh; Deshmukh, Reena

2013-10-01

The custard apple (Annona squamosa) fruits were procured from local market, irradiated with radiation doses 0, 0.25, 0.50, 0.75, 1.00, 1.25, 1.50, 1.75 kGy and then treated with benzyl adenine (50 and 100 part per million) and stored at ambient temperature (25 ± 5 °C, Relative Humidity 90 ± 2%) for 12 days. The treated fruits were evaluated for sensory (viz; flavour, texture, internal and external colour) and chemical constituents (viz; Total Soluble Solids, titrable acidity, ascorbic acid, free soluble sugar, reducing sugar. non reducing sugar, carbohydrate) during storage. The study concluded that radiation dose of 1.5 kilo Gray along with 50 ppm benzyl adenine enhanced in shelf-life of custard apple fruits by 6 days at ambient temperature with good pulp texture, flavour, colour and nutritional quality as compared to control.

Bilateral frontal activation associated with cutaneous stimulation of elixir field: an FMRI study.

PubMed

Chan, Agnes S; Cheung, Mei-Chun; Chan, Yu Leung; Yeung, David K W; Lam, Wan

2006-01-01

Elixir Field, or Dan Tian, is the area where energy is stored and nourished in the body according to traditional Chinese medicine (TCM). Although Dan Tian stimulation is a major concept in Qigong healing and has been practiced for thousands of years, and while there are some recent empirical evidence of its effect, its neurophysiological basis remains unknown. We used functional magnetic resonance imaging (fMRI) to study brain activations associated with external stimulation of the lower Elixir Field in ten normal subjects, and compared the results with the stimulation of their right hands. While right-hand stimulation resulted in left postcentral gyrus activation, stimulation of the lower Elixir Field resulted in bilateral activations including the medial and superior frontal gyrus, middle and superior temporal gyrus, thalamus, insula, and cingulate gyrus. These findings suggest that stimulation of the Elixir Field is not only associated with activation of the sensory motor cortex but also with cortical regions that mediate planning, attention, and memory.

Inward current activated by carbachol in rat intestinal smooth muscle cells.

PubMed Central

Ito, S; Ohta, T; Nakazato, Y

1993-01-01

1. Carbachol (0.1 mM or 10 microM)-evoked inward currents were studied with standard and perforated whole-cell patch clamp techniques in smooth muscle cells isolated from rat small intestine. The intracellular free Ca2+ concentration was monitored simultaneously with the fura-2 method. 2. With a K(+)-containing pipette solution, carbachol produced an inward current at -60 mV and a large outward current at -20 mV. 3. When NaCl was substituted for KCl in the external and pipette solutions, carbachol elicited inward currents at holding potentials more inside-negative than 0 mV. The reversal potential of the carbachol-induced current altered when external chloride (-0.9 mV) was replaced by iodide (-21.2 mV), thiocyanate (-27.0 mV) and glutamate (18.2 mV). The carbachol-induced current at -60 mV was slightly decreased by the replacement of external NaCl with Tris-Cl. 4. The carbachol-induced inward current at -60 mV was accompanied by an increase in the intracellular concentration of free Ca2+. Both responses to carbachol were observed 2 min after exposure of the cells to a Ca(2+)-free solution containing 2 mM EGTA. 5. Intracellular application of heparin inhibited the inward current and Ca2+ transient responses to carbachol but not those to caffeine (10 mM). An inward current and Ca2+ transient were elicited after the patch membrane was ruptured at -60 mV, using a patch pipette containing inositol 1,4,5-trisphosphate (InsP3). 6. It is concluded that the carbachol-induced inward current is due to increases in membrane Cl- and Na+ conductances. Ca2+ released from InsP3-sensitive stores may play a role in increasing both conductances. PMID:7508506

Grid Computing Application for Brain Magnetic Resonance Image Processing

NASA Astrophysics Data System (ADS)

Valdivia, F.; Crépeault, B.; Duchesne, S.

2012-02-01

This work emphasizes the use of grid computing and web technology for automatic post-processing of brain magnetic resonance images (MRI) in the context of neuropsychiatric (Alzheimer's disease) research. Post-acquisition image processing is achieved through the interconnection of several individual processes into pipelines. Each process has input and output data ports, options and execution parameters, and performs single tasks such as: a) extracting individual image attributes (e.g. dimensions, orientation, center of mass), b) performing image transformations (e.g. scaling, rotation, skewing, intensity standardization, linear and non-linear registration), c) performing image statistical analyses, and d) producing the necessary quality control images and/or files for user review. The pipelines are built to perform specific sequences of tasks on the alphanumeric data and MRIs contained in our database. The web application is coded in PHP and allows the creation of scripts to create, store and execute pipelines and their instances either on our local cluster or on high-performance computing platforms. To run an instance on an external cluster, the web application opens a communication tunnel through which it copies the necessary files, submits the execution commands and collects the results. We present result on system tests for the processing of a set of 821 brain MRIs from the Alzheimer's Disease Neuroimaging Initiative study via a nonlinear registration pipeline composed of 10 processes. Our results show successful execution on both local and external clusters, and a 4-fold increase in performance if using the external cluster. However, the latter's performance does not scale linearly as queue waiting times and execution overhead increase with the number of tasks to be executed.

Retail Food Store Access in Rural Appalachia: A Mixed Methods Study.

PubMed

Thatcher, Esther; Johnson, Cassandra; Zenk, Shannon N; Kulbok, Pamela

2017-05-01

To describe how characteristics of food retail stores (potential access) and other factors influence self-reported food shopping behavior (realized food access) among low-income, rural Central Appalachian women. Cross-sectional descriptive. Potential access was assessed through store mapping and in-store food audits. Factors influencing consumers' realized access were assessed through in-depth interviews. Results were merged using a convergent parallel mixed methods approach. Food stores (n = 50) and adult women (n = 9) in a rural Central Appalachian county. Potential and realized food access were described across five dimensions: availability, accessibility, affordability, acceptability, and accommodation. Supermarkets had better availability of healthful foods, followed by grocery stores, dollar stores, and convenience stores. On average, participants lived within 10 miles of 3.9 supermarkets or grocery stores, and traveled 7.5 miles for major food shopping. Participants generally shopped at the closest store that met their expectations for food availability, price, service, and atmosphere. Participants' perceptions of stores diverged from each other and from in-store audit findings. Findings from this study can help public health nurses engage with communities to make affordable, healthy foods more accessible. Recommendations are made for educating low-income consumers and partnering with food stores. © 2016 Wiley Periodicals, Inc.

Study on store-space assignment based on logistic AGV in e-commerce goods to person picking pattern

NASA Astrophysics Data System (ADS)

Xu, Lijuan; Zhu, Jie

2017-10-01

This paper studied on the store-space assignment based on logistic AGV in E-commerce goods to person picking pattern, and established the store-space assignment model based on the lowest picking cost, and design for store-space assignment algorithm after the cluster analysis based on similarity coefficient. And then through the example analysis, compared the picking cost between store-space assignment algorithm this paper design and according to item number and storage according to ABC classification allocation, and verified the effectiveness of the design of the store-space assignment algorithm.

Neighborhood impact on healthy food availability and pricing in food stores.

PubMed

Krukowski, Rebecca A; West, Delia Smith; Harvey-Berino, Jean; Elaine Prewitt, T

2010-06-01

Availability and price of healthy foods in food stores has the potential to influence purchasing patterns, dietary intake, and weight status of individuals. This study examined whether demographic factors of the store neighborhood or store size have an impact on the availability and price of healthy foods in sample of grocery stores and supermarkets. The Nutrition Environment Measures Study-Store (NEMS-S) instrument, a standardized observational survey, was utilized to evaluate food stores (N = 42) in a multi-site (Vermont and Arkansas) study in 2008. Census data associated with store census tract (median household income and proportion African-American) were used to characterize store neighborhood and number of cash registers was used to quantify store size. Median household income was significantly associated with the NEMS healthy food availability score (r = 0.36, P < 0.05); neither racial composition (r = -0.23, P = 0.14) nor store size (r = 0.27, P = 0.09) were significantly related to the Availability score. Larger store size (r = 0.40, P < 0.01) was significantly associated with the NEMS-S Price scores, indicating more favorable prices for healthier items; neither racial composition nor median household income were significantly related to the Price score (P's > 0.05). Even among supermarkets, healthier foods are less available in certain neighborhoods, although, when available, the quality of healthier options did not differ, suggesting that targeting availability may offer promise for policy initiatives. Furthermore, increasing access to larger stores that can offer lower prices for healthier foods may provide another avenue for enhancing food environments to lower disease risk.

A 3D Full-Stokes Calving Model Applied to a West Greenland Outlet Glacier

NASA Astrophysics Data System (ADS)

Todd, Joe; Christoffersen, Poul; Zwinger, Thomas; Råback, Peter; Chauché, Nolwenn; Hubbard, Alun; Toberg, Nick; Luckman, Adrian; Benn, Doug; Slater, Donald; Cowton, Tom

2017-04-01

Iceberg calving from outlet glaciers accounts for around half of all mass loss from both the Greenland and Antarctic ice sheets. The diverse nature of calving and its complex links to both internal dynamics and external climate make it challenging to incorporate into models of glaciers and ice sheets. Consequently, calving represents one of the most significant uncertainties in predictions of future sea level rise. Here, we present results from a new 3D full-Stokes calving model developed in Elmer/Ice and applied to Store Glacier, the second largest outlet glacier in West Greenland. The calving model implements the crevasse depth criterion, which states that calving occurs when surface and basal crevasses penetrate the full thickness of the glacier. The model also implements a new 3D rediscretization approach and a time-evolution scheme which allow the calving front to evolve realistically through time. We use the model to test Store's sensitivity to two seasonal environmental processes believed to significantly influence calving: submarine melt undercutting and ice mélange buttressing. Store Glacier discharges 13.9 km3 of ice annually, and this calving rate shows a strong seasonal trend. We aim to reproduce this seasonal trend by forcing the model with present day levels of submarine melting and ice mélange buttressing. Sensitivity to changes in these frontal processes was also investigated, by forcing the model with a) increased submarine melt rates acting over longer periods of time and b) decreased mélange buttressing force acting over a reduced period. The model displays a range of observed calving behaviour and provides a good match to the observed seasonal evolution of the Store's terminus. The results indicate that ice mélange is the primary driver of the observed seasonal advance of the terminus and the associated seasonal variation in calving rate. The model also demonstrates a significant influence from submarine melting on calving rate. The results also highlight the importance of topographic setting; Store Glacier terminates on a large bedrock sill, and this was found to exert a first-order control on calving rate, explaining Store Glacier's comparative stability during a period when many Greenland outlet glaciers underwent concurrent retreat.

Healthful Nutrition of Foods in Navajo Nation Stores: Availability and Pricing.

PubMed

Kumar, Gayathri; Jim-Martin, Sonlatsa; Piltch, Emily; Onufrak, Stephen; McNeil, Carrie; Adams, Laura; Williams, Nancy; Blanck, Heidi M; Curley, Larry

2016-09-01

Low availability and affordability of healthier foods in food stores on the Navajo Nation (NN) may be a community-level risk factor for the high prevalence of obesity among the Navajo people. This study assessed the availability and pricing of foods and beverages in supermarkets and convenience stores throughout the NN. Descriptive study design using the Nutrition Environment Measurement Survey in Stores audit tool. Supermarkets (n = 13) and convenience stores (n = 50) on NN and border-town supermarkets (n = 9). Not applicable. Availability and pricing of healthy and less-healthy foods. Descriptive and χ(2) analyses. Navajo convenience stores offered fewer healthier food options compared to Navajo supermarkets. In Navajo convenience stores, 100% whole grain products, reduced-fat cheese, lean meats, reduced-fat chips, and fat-free or light hot dogs were available in fewer stores than their corresponding less-healthy versions (all with p < .05). In both Navajo supermarkets and convenience stores, 100% whole wheat bread, lean cold cuts, and reduced-fat cheese were all more expensive per unit than their corresponding less-healthy versions (all with p < .05). According to this study, healthier foods are not as readily available in Navajo convenience stores as they are in Navajo supermarkets. Improving access to and affordability of healthier foods in reservation stores of all sizes may support healthy eating among Navajo residents. © 2016 by American Journal of Health Promotion, Inc.

In-Store Experimental Approach to Pricing and Consumer Behavior

ERIC Educational Resources Information Center

Sigurdsson, Valdimar; Foxall, Gordon; Saevarsson, Hugi

2010-01-01

This study assessed how, and to what extent, it is possible to use behavioral experimentation and relative sales analysis to study the effects of price on consumers' brand choices in the store environment. An in-store experiment was performed in four stores to investigate the effects of different prices of a target brand on consumers' relative…

KSC-2010-1008

NASA Image and Video Library

2010-01-05

CAPE CANAVERAL, Fla. – At NASA's Kennedy Space Center in Florida, workers prepare to store External Tank-135, newly delivered to the transfer aisle of the Vehicle Assembly Building. The tank arrived in Florida on Dec. 26 aboard the Pegasus barge, towed by a solid rocket booster retrieval ship from NASA's Michoud Assembly Facility near New Orleans. ET-135 will be used to launch space shuttle Discovery on the STS-131 mission to the International Space Station. Launch is targeted for March 18. For information on the components of the space shuttle and the STS-131 mission, visit http://www.nasa.gov/mission_pages/shuttle/shuttlemissions/sts131/index.html. Photo credit: NASA/Jack Pfaller

Method for traffic-sign detection within a picture by color identification and external shape recognition

NASA Astrophysics Data System (ADS)

Falcoff, Daniel E.; Canali, Luis R.

1999-08-01

This work present one method aimed to individualization and recognition of vial signs in route and city. It is based fundamentally on the identification by means of color and form of the vial sing, located in the border of the route or street in city, and then recognition. To do so the obtained RGB image is processed, carrying out diverse filtrates in the sequence of input image, or intensifying the colors of the same ones otherwise, recognizing their silhouette and then segmenting the sign and comparing the symbology of them with the previously stored and classified database.

Piezotronic nanowire-based resistive switches as programmable electromechanical memories.

PubMed

Wu, Wenzhuo; Wang, Zhong Lin

2011-07-13

We present the first piezoelectrically modulated resistive switching device based on piezotronic ZnO nanowire (NW), through which the write/read access of the memory cell is programmed via electromechanical modulation. Adjusted by the strain-induced polarization charges created at the semiconductor/metal interface under externally applied deformation by the piezoelectric effect, the resistive switching characteristics of the cell can be modulated in a controlled manner, and the logic levels of the strain stored in the cell can be recorded and read out, which has the potential for integrating with NEMS technology to achieve micro/nanosystems capable for intelligent and self-sufficient multidimensional operations.

Sugars, Sweet Taste Receptors, and Brain Responses.

PubMed

Lee, Allen A; Owyang, Chung

2017-06-24

Sweet taste receptors are composed of a heterodimer of taste 1 receptor member 2 (T1R2) and taste 1 receptor member 3 (T1R3). Accumulating evidence shows that sweet taste receptors are ubiquitous throughout the body, including in the gastrointestinal tract as well as the hypothalamus. These sweet taste receptors are heavily involved in nutrient sensing, monitoring changes in energy stores, and triggering metabolic and behavioral responses to maintain energy balance. Not surprisingly, these pathways are heavily regulated by external and internal factors. Dysfunction in one or more of these pathways may be important in the pathogenesis of common diseases, such as obesity and type 2 diabetes mellitus.

Modeling Common-Sense Decisions

NASA Astrophysics Data System (ADS)

Zak, Michail

This paper presents a methodology for efficient synthesis of dynamical model simulating a common-sense decision making process. The approach is based upon the extension of the physics' First Principles that includes behavior of living systems. The new architecture consists of motor dynamics simulating actual behavior of the object, and mental dynamics representing evolution of the corresponding knowledge-base and incorporating it in the form of information flows into the motor dynamics. The autonomy of the decision making process is achieved by a feedback from mental to motor dynamics. This feedback replaces unavailable external information by an internal knowledgebase stored in the mental model in the form of probability distributions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dolan, Daniel H.; Ao, Tommy

The Sandia Data Archive (SDA) format is a specific implementation of the HDF5 (Hierarchal Data Format version 5) standard. The format was developed for storing data in a universally accessible manner. SDA files may contain one or more data records, each associated with a distinct text label. Primitive records provide basic data storage, while compound records support more elaborate grouping. External records allow text/binary files to be carried inside an archive and later recovered. This report documents version 1.0 of the SDA standard. The information provided here is sufficient for reading from and writing to an archive. Although the formatmore » was original designed for use in MATLAB, broader use is encouraged.« less

Optical memory based on quantized atomic center-of-mass motion.

PubMed

Lopez, J P; de Almeida, A J F; Felinto, D; Tabosa, J W R

2017-11-01

We report a new type of optical memory using a pure two-level system of cesium atoms cooled by the magnetically assisted Sisyphus effect. The optical information of a probe field is stored in the coherence between quantized vibrational levels of the atoms in the potential wells of a 1-D optical lattice. The retrieved pulse shows Rabi oscillations with a frequency determined by the reading beam intensity and are qualitatively understood in terms of a simple theoretical model. The exploration of the external degrees of freedom of an atom may add another capability in the design of quantum-information protocols using light.

PLASMA DEVICE

DOEpatents

Baker, W.R.

1961-08-22

A device is described for establishing and maintaining a high-energy, rotational plasma for use as a fast discharge capacitor. A disc-shaped, current- conducting plasma is formed in an axinl magnetic field and a crossed electric field, thereby creating rotational kinetic enengy in the plasma. Such energy stored in the rotation of the plasma disc is substantial and is convertible tc electrical energy by generator action in an output line electrically coupled to the plasma volume. Means are then provided for discharging the electrical energy into an external circuit coupled to the output line to produce a very large pulse having an extremely rapid rise time in the waveform thereof. (AE C)

The SBOL Stack: A Platform for Storing, Publishing, and Sharing Synthetic Biology Designs.

PubMed

Madsen, Curtis; McLaughlin, James Alastair; Mısırlı, Göksel; Pocock, Matthew; Flanagan, Keith; Hallinan, Jennifer; Wipat, Anil

2016-06-17

Recently, synthetic biologists have developed the Synthetic Biology Open Language (SBOL), a data exchange standard for descriptions of genetic parts, devices, modules, and systems. The goals of this standard are to allow scientists to exchange designs of biological parts and systems, to facilitate the storage of genetic designs in repositories, and to facilitate the description of genetic designs in publications. In order to achieve these goals, the development of an infrastructure to store, retrieve, and exchange SBOL data is necessary. To address this problem, we have developed the SBOL Stack, a Resource Description Framework (RDF) database specifically designed for the storage, integration, and publication of SBOL data. This database allows users to define a library of synthetic parts and designs as a service, to share SBOL data with collaborators, and to store designs of biological systems locally. The database also allows external data sources to be integrated by mapping them to the SBOL data model. The SBOL Stack includes two Web interfaces: the SBOL Stack API and SynBioHub. While the former is designed for developers, the latter allows users to upload new SBOL biological designs, download SBOL documents, search by keyword, and visualize SBOL data. Since the SBOL Stack is based on semantic Web technology, the inherent distributed querying functionality of RDF databases can be used to allow different SBOL stack databases to be queried simultaneously, and therefore, data can be shared between different institutes, centers, or other users.

Modelling impulsive factors for electronics and restaurant coupons’ e-store display

NASA Astrophysics Data System (ADS)

Ariningsih, P. K.; Nainggolan, M.; Sandy, I. A.

2018-04-01

In many times, the increment of e-store visitors does not followed by sales increment. Most purchases through e-commerce are impulsive buying, however only small amount of study is available to understand impulsive factors of e-store display. This paper suggests a preliminary concept on understanding the impulsive factors in Electronics and Restaurant Coupons e-store display, which are two among few popular group products sold through e-commerce. By conducting literature study and survey, 31 attributes were identified as impulsive factors in electronics e-store display and 20 attributes were identified as impulsive factors for restaurant coupon e-store. The attributes were then grouped into comprehensive impulsive factors by factor analysis. Each group of impulsive attributes were generated into 3 factors. Accessibility Factors and Trust Factors appeared for each group products. The other factors are Internal Factors for electronics e-store and Marketing factors for restaurant coupons e-store. Structural Equation Model of the impulsive factors was developed for each type of e-store, which stated the covariance between Trust Factors and Accessibility Factors. Based on preliminary model, Internal Factor and Trust Factor are influencing impulsive buying in electronics store. Special factor for electronics e-store is Internal Factor, while for restaurant coupons e-store is Marketing Factor.

A corner store intervention in a low-income urban community is associated with increased availability and sales of some healthy foods.

PubMed

Song, Hee-Jung; Gittelsohn, Joel; Kim, Miyong; Suratkar, Sonali; Sharma, Sangita; Anliker, Jean

2009-11-01

While corner store-based nutrition interventions have emerged as a potential strategy to increase healthy food availability in low-income communities, few evaluation studies exist. We present the results of a trial in Baltimore City to increase the availability and sales of healthier food options in local stores. Quasi-experimental study. Corner stores owned by Korean-Americans and supermarkets located in East and West Baltimore. Seven corner stores and two supermarkets in East Baltimore received a 10-month intervention and six corner stores and two supermarkets in West Baltimore served as comparison. During and post-intervention, stocking of healthy foods and weekly reported sales of some promoted foods increased significantly in intervention stores compared with comparison stores. Also, intervention storeowners showed significantly higher self-efficacy for stocking some healthy foods in comparison to West Baltimore storeowners. Findings of the study demonstrated that increases in the stocking and promotion of healthy foods can result in increased sales. Working in small corner stores may be a feasible means of improving the availability of healthy foods and their sales in a low-income urban community.

Stability of selected serum hormones and lipids after long-term storage in the Janus Serum Bank.

PubMed

Gislefoss, Randi E; Grimsrud, Tom K; Mørkrid, Lars

2015-04-01

The potential value of a biobank depends on the quality of the samples, i.e. how well they reflect the biological or biochemical state of the donors at the time of sampling. Documentation of sample quality has become a particularly important issue for researchers and users of biobank studies. The aim of this study was to investigate the long-term stability of selected components: cholesterol, high density cholesterol (HDLC), low density cholesterol (LDLC), apolipoprotein A1 (apo-A1), apolipoprotein B (apo B), follicle stimulating hormone (FSH), luteinizing hormone (LH), prolactin (PRL), thyroid stimulating hormone (TSH) and free thyroxin (FT4). Samples, stored at -25°C, from 520 men aged 40-49 years at blood sampling distributed in equally sized groups (n=130) according to length of storage, 0, 4, 17 and 29 years, respectively, were used in a cross sectional design. The freshly collected serum samples were used as a reference group to calculate storage related changes. The differences between fresh samples and samples stored for 29 years were substantial for apo-A1 (+12%), apo-B (+22.3%), HDLC (-69.2%), LDLC (+31.3%), and PRL (-33.5%), while total cholesterol, FSH, LH, TSH and FT4 did not show any significant difference. The study showed large differences in serum level of the selected components. The lipids and apolipoproteins were all changed except for total cholesterol. Most hormones investigated (FSH, LH, TSH and FT4) proved to be stable after 29 years of storage while PRL showed sign of degradation. The observed differences are probably due to long-term storage effects and/or external factors (i.e. diet and smoking). Copyright © 2014 The Canadian Society of Clinical Chemists. Published by Elsevier Inc. All rights reserved.

A model for estimating passive integrated transponder (PIT) tag antenna efficiencies for interval-specific emigration rates

USGS Publications Warehouse

Horton, G.E.; Dubreuil, T.L.; Letcher, B.H.

2007-01-01

Our goal was to understand movement and its interaction with survival for populations of stream salmonids at long-term study sites in the northeastern United States by employing passive integrated transponder (PIT) tags and associated technology. Although our PIT tag antenna arrays spanned the stream channel (at most flows) and were continuously operated, we are aware that aspects of fish behavior, environmental characteristics, and electronic limitations influenced our ability to detect 100% of the emigration from our stream site. Therefore, we required antenna efficiency estimates to adjust observed emigration rates. We obtained such estimates by testing a full-scale physical model of our PIT tag antenna array in a laboratory setting. From the physical model, we developed a statistical model that we used to predict efficiency in the field. The factors most important for predicting efficiency were external radio frequency signal and tag type. For most sampling intervals, there was concordance between the predicted and observed efficiencies, which allowed us to estimate the true emigration rate for our field populations of tagged salmonids. One caveat is that the model's utility may depend on its ability to characterize external radio frequency signals accurately. Another important consideration is the trade-off between the volume of data necessary to model efficiency accurately and the difficulty of storing and manipulating large amounts of data.

An ecological analysis of food outlet density and prevalence of type II diabetes in South Carolina counties.

PubMed

AlHasan, Dana M; Eberth, Jan Marie

2016-01-05

Studies suggest that the built environment with high numbers of fast food restaurants and convenience stores and low numbers of super stores and grocery stores are related to obesity, type II diabetes mellitus, and other chronic diseases. Since few studies assess these relationships at the county level, we aim to examine fast food restaurant density, convenience store density, super store density, and grocery store density and prevalence of type II diabetes among counties in South Carolina. Pearson's correlation between four types of food outlet densities- fast food restaurants, convenience stores, super stores, and grocery stores- and prevalence of type II diabetes were computed. The relationship between each of these food outlet densities were mapped with prevalence of type II diabetes, and OLS regression analysis was completed adjusting for county-level rates of obesity, physical inactivity, density of recreation facilities, unemployment, households with no car and limited access to stores, education, and race. We showed a significant, negative relationship between fast food restaurant density and prevalence of type II diabetes, and a significant, positive relationship between convenience store density and prevalence of type II diabetes. In adjusted analysis, the food outlet densities (of any type) was not associated with prevalence of type II diabetes. This ecological analysis showed no associations between fast food restaurants, convenience stores, super stores, or grocery stores densities and the prevalence of type II diabetes. Consideration of environmental, social, and cultural determinants, as well as individual behaviors is needed in future research.

Store manager performance and satisfaction: effects on store employee performance and satisfaction, store customer satisfaction, and store customer spending growth.

PubMed

Netemeyer, Richard G; Maxham, James G; Lichtenstein, Donald R

2010-05-01

Based on emotional contagion theory and the value-profit chain literatures, the present study posits a number of hypotheses that show how managers in the small store, small number of employees retail context may affect store employees, customers, and potentially store performance. With data from 306 store managers, 1,615 store customer-contact employees, and 57,656 customers of a single retail chain, the authors examined relationships among store manager job satisfaction and job performance, store customer-contact employee job satisfaction and job performance, customer satisfaction with the retailer, and a customer-spending-based store performance metric (customer spending growth over a 2-year period). Via path analysis, several hypothesized direct and interaction relations among these constructs are supported. The results suggest implications for academic researchers and retail managers. PsycINFO Database Record (c) 2010 APA, all rights reserved.

Trick Simulation Environment 07

NASA Technical Reports Server (NTRS)

Lin, Alexander S.; Penn, John M.

2012-01-01

The Trick Simulation Environment is a generic simulation toolkit used for constructing and running simulations. This release includes a Monte Carlo analysis simulation framework and a data analysis package. It produces all auto documentation in XML. Also, the software is capable of inserting a malfunction at any point during the simulation. Trick 07 adds variable server output options and error messaging and is capable of using and manipulating wide characters for international support. Wide character strings are available as a fundamental type for variables processed by Trick. A Trick Monte Carlo simulation uses a statistically generated, or predetermined, set of inputs to iteratively drive the simulation. Also, there is a framework in place for optimization and solution finding where developers may iteratively modify the inputs per run based on some analysis of the outputs. The data analysis package is capable of reading data from external simulation packages such as MATLAB and Octave, as well as the common comma-separated values (CSV) format used by Excel, without the use of external converters. The file formats for MATLAB and Octave were obtained from their documentation sets, and Trick maintains generic file readers for each format. XML tags store the fields in the Trick header comments. For header files, XML tags for structures and enumerations, and the members within are stored in the auto documentation. For source code files, XML tags for each function and the calling arguments are stored in the auto documentation. When a simulation is built, a top level XML file, which includes all of the header and source code XML auto documentation files, is created in the simulation directory. Trick 07 provides an XML to TeX converter. The converter reads in header and source code XML documentation files and converts the data to TeX labels and tables suitable for inclusion in TeX documents. A malfunction insertion capability allows users to override the value of any simulation variable, or call a malfunction job, at any time during the simulation. Users may specify conditions, use the return value of a malfunction trigger job, or manually activate a malfunction. The malfunction action may consist of executing a block of input file statements in an action block, setting simulation variable values, call a malfunction job, or turn on/off simulation jobs.

The interference aerodynamics caused by the wing elasticity during store separation

NASA Astrophysics Data System (ADS)

Lei, Yang; Zheng-yin, Ye

2016-04-01

Air-launch-to-orbit is the technology that has stores carried aloft and launched the store from the plane to the orbit. The separation between the aircraft and store is one of the most important and difficult phases in air-launch-to-orbit technology. There exists strong aerodynamic interference between the aircraft and the store in store separation. When the aspect ratio of the aircraft is large, the elastic deformations of the wing must be considered. The main purpose of this article is to study the influence of the interference aerodynamics caused by the elastic deformations of the wing to the unsteady aerodynamics of the store. By solving the coupled functions of unsteady Navier-Stokes equations, six degrees of freedom dynamic equations and structural dynamic equations simultaneously, the store separation with the elastic deformation of the aircraft considered is simulated numerically. And the interactive aerodynamic forces are analyzed. The study shows that the interference aerodynamics is obvious at earlier time during the separation, and the dominant frequency of the elastic wing determines the aerodynamic forces frequencies of the store. Because of the effect of the interference aerodynamics, the roll angle response and pitch angle response increase. When the store is mounted under the wingtip, the additional aerodynamics caused by the wingtip vortex is obvious, which accelerate the divergence of the lateral force and the lateral-directional attitude angle of the store. This study supports some beneficial conclusions to the engineering application of the air-launch-to-orbit.

MolabIS--an integrated information system for storing and managing molecular genetics data.

PubMed

Truong, Cong V C; Groeneveld, Linn F; Morgenstern, Burkhard; Groeneveld, Eildert

2011-10-31

Long-term sample storage, tracing of data flow and data export for subsequent analyses are of great importance in genetics studies. Therefore, molecular labs do need a proper information system to handle an increasing amount of data from different projects. We have developed a molecular labs information management system (MolabIS). It was implemented as a web-based system allowing the users to capture original data at each step of their workflow. MolabIS provides essential functionality for managing information on individuals, tracking samples and storage locations, capturing raw files, importing final data from external files, searching results, accessing and modifying data. Further important features are options to generate ready-to-print reports and convert sequence and microsatellite data into various data formats, which can be used as input files in subsequent analyses. Moreover, MolabIS also provides a tool for data migration. MolabIS is designed for small-to-medium sized labs conducting Sanger sequencing and microsatellite genotyping to store and efficiently handle a relative large amount of data. MolabIS not only helps to avoid time consuming tasks but also ensures the availability of data for further analyses. The software is packaged as a virtual appliance which can run on different platforms (e.g. Linux, Windows). MolabIS can be distributed to a wide range of molecular genetics labs since it was developed according to a general data model. Released under GPL, MolabIS is freely available at http://www.molabis.org.

Evaporation suppression from reservoirs using floating covers: Lab scale wind-tunnel observations and mechanistic model predictions

NASA Astrophysics Data System (ADS)

Or, Dani; Lehmann, Peter; Aminzadeh, Milad; Sommer, Martina; Wey, Hannah; Krentscher, Christiane; Wunderli, Hans; Breitenstein, Daniel

2017-04-01

The competition over dwindling fresh water resources is expected to intensify with projected increase in human population in arid regions, expansion of irrigated land and changes in climate and drought patterns. The volume of water stored in reservoirs would also increase to mitigate seasonal shortages due to rainfall variability and to meet irrigation water needs. By some estimates up to half of the stored water is lost to evaporation, thereby exacerbating the water scarcity problem. Recently, there is an upsurge in the use of self-assembling floating covers to suppress evaporation, yet the design and implementation remain largely empirical. We report a systematic experimental evaluation of different cover types and external drivers (radiation, wind, wind plus radiation) on evaporation suppression and energy balance of a 1.4 m2 basin placed in a wind-tunnel. Surprisingly, evaporation suppression by black and white floating covers (balls and plates) were similar despite significantly different energy balance regimes over the cover surfaces. Moreover, the evaporation suppression efficiency was a simple function of the uncovered area (square root of the uncovered fraction) with linear relations with the covered area in some cases. The thermally decoupled floating covers offer an efficient solution to the evaporation suppression with limited influence of the surface energy balance (water temperature for black and white covers was similar and remained nearly constant). The results will be linked with a predictive evaporation-energy balance model and issues of spatial scales and long exposure times will be studied.

MolabIS - An integrated information system for storing and managing molecular genetics data

PubMed Central

2011-01-01

Background Long-term sample storage, tracing of data flow and data export for subsequent analyses are of great importance in genetics studies. Therefore, molecular labs do need a proper information system to handle an increasing amount of data from different projects. Results We have developed a molecular labs information management system (MolabIS). It was implemented as a web-based system allowing the users to capture original data at each step of their workflow. MolabIS provides essential functionality for managing information on individuals, tracking samples and storage locations, capturing raw files, importing final data from external files, searching results, accessing and modifying data. Further important features are options to generate ready-to-print reports and convert sequence and microsatellite data into various data formats, which can be used as input files in subsequent analyses. Moreover, MolabIS also provides a tool for data migration. Conclusions MolabIS is designed for small-to-medium sized labs conducting Sanger sequencing and microsatellite genotyping to store and efficiently handle a relative large amount of data. MolabIS not only helps to avoid time consuming tasks but also ensures the availability of data for further analyses. The software is packaged as a virtual appliance which can run on different platforms (e.g. Linux, Windows). MolabIS can be distributed to a wide range of molecular genetics labs since it was developed according to a general data model. Released under GPL, MolabIS is freely available at http://www.molabis.org. PMID:22040322

Force Analysis and Energy Operation of Chaotic System of Permanent-Magnet Synchronous Motor

NASA Astrophysics Data System (ADS)

Qi, Guoyuan; Hu, Jianbing

2017-12-01

The disadvantage of a nondimensionalized model of a permanent-magnet synchronous Motor (PMSM) is identified. The original PMSM model is transformed into a Kolmogorov system to aid dynamic force analysis. The vector field of the PMSM is analogous to the force field including four types of torque — inertial, internal, dissipative, and generalized external. Using the feedback thought, the error torque between external torque and dissipative torque is identified. The pitchfork bifurcation of the PMSM is performed. Four forms of energy are identified for the system — kinetic, potential, dissipative, and supplied. The physical interpretations of the decomposition of force and energy exchange are given. Casimir energy is stored energy, and its rate of change is the error power between the dissipative energy and the energy supplied to the motor. Error torque and error power influence the different types of dynamic modes. The Hamiltonian energy and Casimir energy are compared to find the function of each in producing the dynamic modes. A supremum bound for the chaotic attractor is proposed using the error power and Lagrange multiplier.

KSC-2010-1071

NASA Image and Video Library

2010-01-07

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians prepare to perform a push test on an external tank door beneath space shuttle Atlantis. Two umbilical doors, located on the shuttle's aft fuselage, close after external tank separation following launch. The test confirms that the door's actuators are functioning properly and that signals sent from the actuators correctly indicate that the doors have closed, creating the necessary thermal barrier for reentry. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14, 2010. Photo credit: NASA/Troy Cryder

KSC-2010-1070

NASA Image and Video Library

2010-01-07

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, preparations are under way to perform a push test on an external tank door, shown in this close-up, of space shuttle Atlantis. Two umbilical doors, located on the shuttle's aft fuselage, close after external tank separation following launch. The test confirms that the door's actuators are functioning properly and that signals sent from the actuators correctly indicate that the doors have closed, creating the necessary thermal barrier for reentry. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14, 2010. Photo credit: NASA/Troy Cryder

KSC-2010-1073

NASA Image and Video Library

2010-01-07

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians perform a push test on an external tank door on space shuttle Atlantis. Two umbilical doors, located on the shuttle's aft fuselage, close after external tank separation following launch. The test confirms that the door's actuators are functioning properly and that signals sent from the actuators correctly indicate that the doors have closed, creating the necessary thermal barrier for reentry. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14, 2010. Photo credit: NASA/Troy Cryder

High frequency signal acquisition and control system based on DSP+FPGA

NASA Astrophysics Data System (ADS)

Liu, Xiao-qi; Zhang, Da-zhi; Yin, Ya-dong

2017-10-01

This paper introduces a design and implementation of high frequency signal acquisition and control system based on DSP + FPGA. The system supports internal/external clock and internal/external trigger sampling. It has a maximum sampling rate of 400MBPS and has a 1.4GHz input bandwidth for the ADC. Data can be collected continuously or periodically in systems and they are stored in DDR2. At the same time, the system also supports real-time acquisition, the collected data after digital frequency conversion and Cascaded Integrator-Comb (CIC) filtering, which then be sent to the CPCI bus through the high-speed DSP, can be assigned to the fiber board for subsequent processing. The system integrates signal acquisition and pre-processing functions, which uses high-speed A/D, high-speed DSP and FPGA mixed technology and has a wide range of uses in data acquisition and recording. In the signal processing, the system can be seamlessly connected to the dedicated processor board. The system has the advantages of multi-selectivity, good scalability and so on, which satisfies the different requirements of different signals in different projects.

Proximity to Liquor Stores and Adolescent Alcohol Intake: A Prospective Study.

PubMed

Trapp, Georgina S A; Knuiman, Matthew; Hooper, Paula; Foster, Sarah

2018-06-01

Cross-sectional studies have reported associations between liquor store availability and alcohol use among adolescents, but few prospective studies have confirmed this association. The aim of this study was to examine whether proximity to liquor stores at age 14 years was associated with alcohol intake at ages 14, 17, and 20 years. Participants of the Western Australian Pregnancy Cohort (Raine) Study (n=999) self-reported alcohol intake at age 14 years (early adolescence, 2003-2005); age 17 years (middle adolescence, 2006-2008); and age 20 years (late adolescence, 2009-2011). A GIS measured proximity to the closest liquor store from participants' home and school addresses at age 14 years. Regression analyses in 2017 assessed the relationship between distance to the closest liquor store around home, school, or both (≤800 m versus >800 m) and alcohol intake. In cross-sectional analyses (age 14 years), having a liquor store within 800 m of school was associated with ever having part of an alcoholic drink (OR=2.34, p=0.003). Also, having a liquor store within 800 m of home or school was associated with ever having part of an alcoholic drink (OR=1.49, p=0.029) and ever having engaged in heavy drinking (OR=1.79, p=0.023). In prospective analyses, liquor store proximity at age 14 years was a significant predictor of alcohol intake at age 17 years (OR=2.34, p=0.032) but not at age 20 years. Liquor store availability in early adolescence may be a risk factor for alcohol intake in early and middle, but not late, adolescence. Improved understanding of the longer-term impacts of liquor store exposure on sensitive populations could help inform future licensing regulations. Copyright © 2018 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Tobacco advertising in retail stores.

PubMed Central

Cummings, K M; Sciandra, R; Lawrence, J

1991-01-01

Recent studies have described tobacco advertising in the print media, on billboards, and through sponsorship of cultural and sporting events. However, little attention has been given to another common and unavoidable source of tobacco advertising, that which is encountered in retail stores. In July 1987, we conducted a survey of 61 packaged goods retail stores in Buffalo, NY, to assess the prevalence and type of point-of-sale tobacco advertising. In addition, store owners or managers were surveyed to determine their store's policy regarding tobacco advertising, receipt of monetary incentives from distributors for displaying tobacco ads, and willingness to display antitobacco ads. Six types of stores were involved in the study: 10 supermarkets, 10 privately owned grocery stores, 9 chain convenience food stores that do not sell gasoline, 11 chain convenience food stores that sell gasoline, 11 chain pharmacies, and 10 private pharmacies. Two-thirds of the stores displayed tobacco posters, and 87 percent had promotional items advertising tobacco products, primarily cigarettes. Larger stores, and those that were privately owned, tended to display more posters and promotional items. Eighty percent of tobacco product displays were for cigarettes, 16 percent for smokeless tobacco products, and 4 percent for cigars and pipe tobacco. Convenience stores selling gasoline had the most separate tobacco product displays. Of tobacco product displays, 24 percent were located adjacent to candy and snack displays. Twenty-nine of the 61 store owners or managers indicated that their store had a policy regulating the display of tobacco ads and tobacco product displays.(ABSTRACT TRUNCATED AT 250 WORDS) PMID:1910192

The Grocery Store Food Environment in Northern Greenland and Its Implications for the Health of Reproductive Age Women.

PubMed

Watson, Zoe A; Shanks, Carmen Byker; Miles, Mary P; Rink, Elizabeth

2018-02-01

The population of Greenland is diminishing and environmental and social shifts implicate food availability and the health of reproductive age women. There is little knowledge of the grocery store food environment in Greenland. To address this gap and provide baseline information the present study measured food availability in five grocery stores in northern Greenland. As well, 15 interviews were conducted with reproductive age women, three grocery store managers were interviewed and one interview was conducted with a food distribution manager. Results show few fresh fruits and vegetables are available in grocery stores and in some stores no fresh foods are available. In Kullorsuaq, the primary location for this study, the Nutrition Environment Measures Survey in Stores score in spring 2016 was (3/30) and the Freedman Grocery Store Survey Score was (11/49). Interview results highlight a need to increase communication within the food system and to tailor food distribution policies to the Arctic context with longer term planning protocols for food distribution. These findings can be used to inform future food store environment research in Greenland and for informing policies that improve healthful food availability in grocery stores in northern Greenland.

Corner Store Inventories, Purchases, and Strategies for Intervention: A Review of the Literature.

PubMed

Langellier, Brent A; Garza, Jeremiah R; Prelip, Michael L; Glik, Deborah; Brookmeyer, Ron; Ortega, Alexander N

2013-01-01

An increasingly popular strategy to improving the food retail environment and promoting healthy eating in low-income and minority communities is the corner store conversion. This approach involves partnering with small 'corner' food stores to expand access to high-quality fruits, vegetables, and other healthy foods. We conducted a structured review of the literature to assess inventories and sales in corner stores, as well as to identify intervention strategies employed by corner store conversions. Our review returned eight descriptive studies that discussed corner store inventories and sales, as well as ten intervention studies discussing six unique corner store conversion interventions in the United States, the Marshall Islands, and Canada. Common intervention strategies included: 1) partnering with an existing store, 2) stocking healthy foods, and 3) social marketing and nutrition education. We summarize each strategy and review the effectiveness of overall corner store conversions at changing peoples' food purchasing, preparation, and consumption behaviors. Consumption of fresh, healthy, affordable foods could be improved by supporting existing retailers to expand their selection of healthy foods and promoting healthy eating at the neighborhood level. Additional corner store conversions should be conducted to determine the effectiveness and importance of specific intervention strategies.

Availability of healthy snack foods and beverages in stores near high-income urban, low-income urban, and rural elementary and middle schools in Oregon.

PubMed

Findholt, Nancy E; Izumi, Betty T; Nguyen, Thuan; Pickus, Hayley; Chen, Zunqiu

2014-08-01

Food stores near schools are an important source of snacks for children. However, few studies have assessed availability of healthy snacks in these settings. The aim of this study was to assess availability of healthy snack foods and beverages in stores near schools and examine how availability of healthy items varied by poverty level of the school and rural-urban location. Food stores were selected based on their proximity to elementary/middle schools in three categories: high-income urban, low-income urban, and rural. Audits were conducted within the stores to assess the presence or absence of 48 items in single-serving sizes, including healthy beverages, healthy snacks, fresh fruits, and fresh vegetables. Overall, availability of healthy snack foods and beverages was low in all stores. However, there was significant cross-site variability in availability of several snack and fruit items, with stores near high-income urban schools having higher availability, compared to stores near low-income urban and/or rural schools. Stores near rural schools generally had the lowest availability, although several fruits were found more often in rural stores than in urban stores. There were no significant differences in availability of healthy beverages and fresh vegetables across sites. Availability of healthy snack foods and beverages was limited in stores near schools, but these limitations were more severe in stores proximal to rural and low-income schools. Given that children frequent these stores to purchase snacks, efforts to increase the availability of healthy products, especially in stores near rural and low-income schools, should be a priority.

Shopper marketing nutrition interventions: Social norms on grocery carts increase produce spending without increasing shopper budgets.

PubMed

Payne, Collin R; Niculescu, Mihai; Just, David R; Kelly, Michael P

2015-01-01

We assessed the efficacy of an easy-to-implement shopper marketing nutrition intervention in a pilot and two additional studies to increase produce demand without decreasing store profitability or increasing shopper budgets. We created grocery cart placards that detailed the number of produce items purchased (i.e., descriptive norm) at particular stores (i.e., provincial norm). The effect of these placards on produce spending was assessed across 971,706 individual person grocery store transactions aggregated by day. The pilot study designated a baseline period (in both control and intervention store) followed by installation of grocery cart placards (in the intervention store) for two weeks. The pilot study was conducted in Texas in 2012. In two additional stores, we designated baseline periods followed by 28 days of the same grocery cart placard intervention as in the pilot. Additional interventions were conducted in New Mexico in 2013. The pilot study resulted in a significant difference between average produce spending per day per person across treatment periods (i.e., intervention versus same time period in control) (16%) and the difference between average produce spending per day per person across stores in the control periods (4%); Furthermore, the same intervention in two additional stores resulted in significant produce spending increases of 12.4% and 7.5% per day per person respectively. In all stores, total spending did not change. Descriptive and provincial social norm messages (i.e., on grocery cart placards) may be an overlooked tool to increase produce demand without decreasing store profitability and increasing shopper budgets.

Shopper marketing nutrition interventions: Social norms on grocery carts increase produce spending without increasing shopper budgets☆

PubMed Central

Payne, Collin R.; Niculescu, Mihai; Just, David R.; Kelly, Michael P.

2015-01-01

Objectives We assessed the efficacy of an easy-to-implement shopper marketing nutrition intervention in a pilot and two additional studies to increase produce demand without decreasing store profitability or increasing shopper budgets. Methods We created grocery cart placards that detailed the number of produce items purchased (i.e., descriptive norm) at particular stores (i.e., provincial norm). The effect of these placards on produce spending was assessed across 971,706 individual person grocery store transactions aggregated by day. The pilot study designated a baseline period (in both control and intervention store) followed by installation of grocery cart placards (in the intervention store) for two weeks. The pilot study was conducted in Texas in 2012. In two additional stores, we designated baseline periods followed by 28 days of the same grocery cart placard intervention as in the pilot. Additional interventions were conducted in New Mexico in 2013. Results The pilot study resulted in a significant difference between average produce spending per day per person across treatment periods (i.e., intervention versus same time period in control) (16%) and the difference between average produce spending per day per person across stores in the control periods (4%); Furthermore, the same intervention in two additional stores resulted in significant produce spending increases of 12.4% and 7.5% per day per person respectively. In all stores, total spending did not change. Conclusions Descriptive and provincial social norm messages (i.e., on grocery cart placards) may be an overlooked tool to increase produce demand without decreasing store profitability and increasing shopper budgets. PMID:26844084

Grocery store interventions to change food purchasing behaviors: a systematic review of randomized controlled trials.

PubMed

Hartmann-Boyce, Jamie; Bianchi, Filippo; Piernas, Carmen; Riches, Sarah Payne; Frie, Kerstin; Nourse, Rebecca; Jebb, Susan A

2018-06-01

Diet is an important determinant of health, and food purchasing is a key antecedent to consumption. We set out to evaluate the effectiveness of grocery store interventions to change food purchasing, and to examine whether effectiveness varied based on intervention components, setting, or socioeconomic status. We conducted a systematic review of randomized controlled trials (search performed June 2017). Studies must have: aimed to change food purchasing; been implemented in grocery stores (real or simulated); reported purchasing; and had a minimal control or compared interventions fulfilling our criteria. Searching, screening, bias assessment, and data extraction followed Cochrane methods. We grouped studies by intervention type (economic, environmental, swaps, and/or education), synthesized results narratively, and conducted an exploratory qualitative comparative analysis. We included 35 studies representing 89 interventions, >20,000 participants, and >800 stores. Risk of bias was mixed. Economic interventions showed the most promise, with 8 of the 9 studies in real stores and all 6 in simulated environments detecting an effect on purchasing. Swap interventions appeared promising in the 2 studies based in real stores. Store environment interventions showed mixed effects. Education-only interventions appeared effective in simulated environments but not in real stores. Available data suggested that effects of economic interventions did not differ by socioeconomic status, whereas for other interventions impact was variable. In our qualitative comparative analysis, economic interventions (regardless of setting) and environmental and swap interventions in real stores were associated with statistically significant changes in purchasing in the desired direction for ≥1 of the foods targeted by the intervention, whereas education-only interventions in real stores were not. Findings suggest that interventions implemented in grocery stores-particularly ones that manipulate price, suggest swaps, and perhaps manipulate item availability-have an impact on purchasing and could play a role in public health strategies to improve health. Review protocol registered at https://www.crd.york.ac.uk/PROSPERO/ as CRD42017068809.

Lessons learned from small store programs to increase healthy food access.

PubMed

Gittelsohn, Joel; Laska, Melissa N; Karpyn, Allison; Klingler, Kristen; Ayala, Guadalupe X

2014-03-01

To document implementation challenges and opportunities associated with small store interventions. Case study analysis of small store interventions conducted in 4 regions of the US. We systematically generated matrices to compare and contrast lessons learned to advance implementation science. Seven thematic areas were identified including: establishing relationships with stores, store owner and customer relationships, selection of intervention approaches, stocking healthier foods, evaluation, maintenance of changes, and dissemination. This information provides guidance to researchers and practitioners wishing to design, implement, and evaluate small store interventions.

Disparities in the Availability and Price of Low-Fat and Higher-Fat Milk in US Food Stores by Community Characteristics.

PubMed

Rimkus, Leah; Isgor, Zeynep; Ohri-Vachaspati, Punam; Zenk, Shannon N; Powell, Lisa M; Barker, Dianne C; Chaloupka, Frank J

2015-12-01

National surveillance data identify disparities in low-fat milk consumption by race/ethnicity and income. Some localized studies have shown disparities in access to low-fat milk by community characteristics. Our aim was to assess the availability and price of low-fat and higher-fat milk in food stores throughout the United States and examine associations with community characteristics. We conducted a cross-sectional study involving observational data collection in 2010, 2011, and 2012. The study included 8,959 food stores in 468 communities where nationally representative samples of students attending traditional public middle and high schools resided. We studied the availability and price of whole, 2%, 1%, and skim milk. Multivariate logistic regression and ordinary least squares regression analyses were performed. Models included store type, race/ethnicity, median household income, urbanicity, US Census division, and year of data collection. Less than half of all stores carried 1% and skim milk, and more than three-quarters of stores carried whole and 2% milk. Regression results indicated that the odds of carrying any type of milk were 31% to 67% lower in stores in majority black and 26% to 45% lower in other/mixed race compared with majority white communities. The odds of carrying specifically low-fat milk were 50% to 58% lower in majority Hispanic compared with majority white communities, and 32% to 44% lower in low-income compared with high-income communities. Some significant differences in milk prices by community characteristics were observed in grocery and limited-service stores. On average, low-fat milk options were more expensive in grocery stores in majority black and rural and suburban communities compared with such stores in majority white and urban communities. This is the first nationwide study to examine the availability and price of low-fat and higher-fat milk in food stores and show disparities in access by community characteristics. Policies and programs can play a role in increasing accessibility of low-fat milk in stores in nonwhite and low-income communities. Copyright © 2015 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Nitric Oxide in Astrocyte-Neuron Signaling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Nianzhen

Astrocytes, a subtype of glial cell, have recently been shown to exhibit Ca 2+ elevations in response to neurotransmitters. A Ca 2+ elevation can propagate to adjacent astrocytes as a Ca 2+ wave, which allows an astrocyte to communicate with its neighbors. Additionally, glutamate can be released from astrocytes via a Ca 2+-dependent mechanism, thus modulating neuronal activity and synaptic transmission. In this dissertation, the author investigated the roles of another endogenous signal, nitric oxide (NO), in astrocyte-neuron signaling. First the author tested if NO is generated during astrocytic Ca 2+ signaling by imaging NO in purified murine cortical astrocytemore » cultures. Physiological concentrations of a natural messenger, ATP, caused a Ca 2+-dependent NO production. To test the roles of NO in astrocytic Ca 2+ signaling, the author applied NO to astrocyte cultures via addition of a NO donor, S-nitrosol-N-acetylpenicillamine (SNAP). NO induced an influx of external Ca 2+, possibly through store-operated Ca 2+ channels. The NO-induced Ca 2+ signaling is cGMP-independent since 8-Br-cGMP, an agonistic analog of cGMP, did not induce a detectable Ca 2+ change. The consequence of this NO-induced Ca 2+ influx was assessed by simultaneously monitoring of cytosolic and internal store Ca 2+ using fluorescent Ca 2+ indicators x-rhod-1 and mag-fluo-4. Blockage of NO signaling with the NO scavenger PTIO significantly reduced the refilling percentage of internal stores following ATP-induced Ca 2+ release, suggesting that NO modulates internal store refilling. Furthermore, locally photo-release of NO to a single astrocyte led to a Ca 2+ elevation in the stimulated astrocyte and a subsequent Ca 2+ wave to neighbors. Finally, the author tested the role of NO inglutamate-mediated astrocyte-neuron signaling by recording the astrocyte-evoked glutamate-dependent neuronal slow inward current (SIC). Although NO is not required for the SIC,PTIO reduced SIC amplitude, suggesting that NO modulates glutamate release from astrocytes or glutamate receptor sensitivity of neurons.« less

A store cohort study of compliance with a point-of-sale cigarette display ban in Melbourne, Australia.

PubMed

Zacher, Meghan; Germain, Daniella; Durkin, Sarah; Hayes, Linda; Scollo, Michelle; Wakefield, Melanie

2013-02-01

This study aimed to evaluate compliance with legislation which restricted cigarette displays in retail outlets, and to assess prevalence of pro- and anti-tobacco elements in stores pre- and post-legislation. METHODS Three audits of 302 stores in Melbourne, Australia by trained observers who gathered information on point-of-sale tobacco displays 2-3 months before and 3-4 and 11-12 months after the enactment of new restrictions. Between the first and second audits, nine stores stopped selling tobacco and three stores had either shut down or were closed for renovations. Of the remaining 290 stores, 94.1% observed the full ban on cigarette package visibility, while new restrictions on price board size and new requirements for graphic health warnings were followed in 85.9% and 67.2% of stores, respectively. Between the second and third audits, another seven stores ended tobacco sales and two stores closed. In Audit 3, 89.7% of the remaining 281 stores complied with price board restrictions, and 82.2% of stores followed requirements for graphic health warnings. Overall, the prevalence of anti-tobacco signage increased and pro-tobacco features decreased between audits for every store type and neighborhood socio-economic status. Tobacco retailers were almost universally compliant with placing cigarettes out of sight and a substantial majority were compliant with regulations on price board size and display of graphic health warnings, demonstrating that such legislation can be implemented successfully.

Pricing of Staple Foods at Supermarkets versus Small Food Stores

PubMed Central

Caspi, Caitlin E.; Pelletier, Jennifer E.; Harnack, Lisa J.; Erickson, Darin J.; Laska, Melissa N.

2017-01-01

Prices affect food purchase decisions, particularly in lower-income communities, where access to a range of food retailers (including supermarkets) is limited. The aim of this study was to examine differences in staple food pricing between small urban food stores and the closest supermarkets, as well as whether pricing differentials varied based on proximity between small stores and larger retailers. In 2014, prices were measured for 15 staple foods during store visits in 140 smaller stores (corner stores, gas-marts, dollar stores, and pharmacies) in Minneapolis/St. Paul, MN and their closest supermarket. Mixed models controlling for store type were used to estimate the average price differential between: (a) smaller stores and supermarkets; (b) isolated smaller stores (>1 mile to closest supermarket) and non-isolated smaller stores; and (c) isolated smaller stores inside versus outside USDA-identified food deserts. On average, all items except white bread were 10–54% more expensive in smaller stores than in supermarkets (p < 0.001). Prices were generally not significantly different in isolated stores compared with non-isolated stores for most items. Among isolated stores, there were no price differences inside versus outside food deserts. We conclude that smaller food stores have higher prices for most staple foods compared to their closest supermarket, regardless of proximity. More research is needed to examine staple food prices in different retail spaces. PMID:28809795

Pricing of Staple Foods at Supermarkets versus Small Food Stores.

PubMed

Caspi, Caitlin E; Pelletier, Jennifer E; Harnack, Lisa J; Erickson, Darin J; Lenk, Kathleen; Laska, Melissa N

2017-08-15

Prices affect food purchase decisions, particularly in lower-income communities, where access to a range of food retailers (including supermarkets) is limited. The aim of this study was to examine differences in staple food pricing between small urban food stores and the closest supermarkets, as well as whether pricing differentials varied based on proximity between small stores and larger retailers. In 2014, prices were measured for 15 staple foods during store visits in 140 smaller stores (corner stores, gas-marts, dollar stores, and pharmacies) in Minneapolis/St. Paul, MN and their closest supermarket. Mixed models controlling for store type were used to estimate the average price differential between: (a) smaller stores and supermarkets; (b) isolated smaller stores (>1 mile to closest supermarket) and non-isolated smaller stores; and (c) isolated smaller stores inside versus outside USDA-identified food deserts. On average, all items except white bread were 10-54% more expensive in smaller stores than in supermarkets ( p < 0.001). Prices were generally not significantly different in isolated stores compared with non-isolated stores for most items. Among isolated stores, there were no price differences inside versus outside food deserts. We conclude that smaller food stores have higher prices for most staple foods compared to their closest supermarket, regardless of proximity. More research is needed to examine staple food prices in different retail spaces.

Predictive ability of mid-infrared spectroscopy for major mineral composition and coagulation traits of bovine milk by using the uninformative variable selection algorithm.

PubMed

Visentin, G; Penasa, M; Gottardo, P; Cassandro, M; De Marchi, M

2016-10-01

Milk minerals and coagulation properties are important for both consumers and processors, and they can aid in increasing milk added value. However, large-scale monitoring of these traits is hampered by expensive and time-consuming reference analyses. The objective of the present study was to develop prediction models for major mineral contents (Ca, K, Mg, Na, and P) and milk coagulation properties (MCP: rennet coagulation time, curd-firming time, and curd firmness) using mid-infrared spectroscopy. Individual milk samples (n=923) of Holstein-Friesian, Brown Swiss, Alpine Grey, and Simmental cows were collected from single-breed herds between January and December 2014. Reference analysis for the determination of both mineral contents and MCP was undertaken with standardized methods. For each milk sample, the mid-infrared spectrum in the range from 900 to 5,000cm(-1) was stored. Prediction models were calibrated using partial least squares regression coupled with a wavenumber selection technique called uninformative variable elimination, to improve model accuracy, and validated both internally and externally. The average reduction of wavenumbers used in partial least squares regression was 80%, which was accompanied by an average increment of 20% of the explained variance in external validation. The proportion of explained variance in external validation was about 70% for P, K, Ca, and Mg, and it was lower (40%) for Na. Milk coagulation properties prediction models explained between 54% (rennet coagulation time) and 56% (curd-firming time) of the total variance in external validation. The ratio of standard deviation of each trait to the respective root mean square error of prediction, which is an indicator of the predictive ability of an equation, suggested that the developed models might be effective for screening and collection of milk minerals and coagulation properties at the population level. Although prediction equations were not accurate enough to be proposed for analytic purposes, mid-infrared spectroscopy predictions could be evaluated as phenotypic information to genetically improve milk minerals and MCP on a large scale. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Detecting spatial defects in colored patterns using self-oscillating gels

NASA Astrophysics Data System (ADS)

Fang, Yan; Yashin, Victor V.; Dickerson, Samuel J.; Balazs, Anna C.

2018-06-01

With the growing demand for wearable computers, there is a need for material systems that can perform computational tasks without relying on external electrical power. Using theory and simulation, we design a material system that "computes" by integrating the inherent behavior of self-oscillating gels undergoing the Belousov-Zhabotinsky (BZ) reaction and piezoelectric (PZ) plates. These "BZ-PZ" units are connected electrically to form a coupled oscillator network, which displays specific modes of synchronization. We exploit this attribute in employing multiple BZ-PZ networks to perform pattern matching on complex multi-dimensional data, such as colored images. By decomposing a colored image into sets of binary vectors, we use each BZ-PZ network, or "channel," to store distinct information about the color and the shape of the image and perform the pattern matching operation. Our simulation results indicate that the multi-channel BZ-PZ device can detect subtle differences between the input and stored patterns, such as the color variation of one pixel or a small change in the shape of an object. To demonstrate a practical application, we utilize our system to process a colored Quick Response code and show its potential in cryptography and steganography.

Ca(2+)-stores mobilization by diadenosine tetraphosphate, Ap4A, through a putative P2Y purinoceptor in adrenal chromaffin cells.

PubMed Central

Castro, E.; Pintor, J.; Miras-Portugal, M. T.

1992-01-01

1. Diadenosine tetraphosphate (Ap4A) evoked a concentration-dependent increase in cytosolic [Ca2+] in resting chromaffin cells. The EC50 value for this action was 28.2 +/- 6.6 microM. This effect was also produced by diadenosine pentaphosphate (Ap5A) with an EC50 of 50 +/- 7 microM. 2. In contrast with this effect, pretreatment with Ap4A or Ap5A induced a 30% reduction in Ca2+ entry following 10 microM dimethylphenylpiperazinium. 3. The elevation in cytosolic [Ca2+] induced by Ap4A was persistent in approximately 100 nM external [Ca2+] and was sensitive to depletion of internal Ca2+ stores by a bradykinin prepulse or whole cell depletion in Ca2+. 4. The effect of Ap4A was mimicked and desensitized by the agonist adenosine 5'-O-(2-thiodiphosphate), and blocked by the P2Y-receptor antagonist, cibachrome blue. The P2X-receptor agonist alpha,beta-methylene adenosine 5'-triphosphate was inactive both by itself or in combination with Ap4A. This is compatible with a P2Y-purinoceptor-mediated action. PMID:1393282

Ca(2+)-stores mobilization by diadenosine tetraphosphate, Ap4A, through a putative P2Y purinoceptor in adrenal chromaffin cells.

PubMed

Castro, E; Pintor, J; Miras-Portugal, M T

1992-08-01

1. Diadenosine tetraphosphate (Ap4A) evoked a concentration-dependent increase in cytosolic [Ca2+] in resting chromaffin cells. The EC50 value for this action was 28.2 +/- 6.6 microM. This effect was also produced by diadenosine pentaphosphate (Ap5A) with an EC50 of 50 +/- 7 microM. 2. In contrast with this effect, pretreatment with Ap4A or Ap5A induced a 30% reduction in Ca2+ entry following 10 microM dimethylphenylpiperazinium. 3. The elevation in cytosolic [Ca2+] induced by Ap4A was persistent in approximately 100 nM external [Ca2+] and was sensitive to depletion of internal Ca2+ stores by a bradykinin prepulse or whole cell depletion in Ca2+. 4. The effect of Ap4A was mimicked and desensitized by the agonist adenosine 5'-O-(2-thiodiphosphate), and blocked by the P2Y-receptor antagonist, cibachrome blue. The P2X-receptor agonist alpha,beta-methylene adenosine 5'-triphosphate was inactive both by itself or in combination with Ap4A. This is compatible with a P2Y-purinoceptor-mediated action.

A Flexible Integrated System Containing a Microsupercapacitor, a Photodetector, and a Wireless Charging Coil.

PubMed

Yue, Yang; Yang, Zhichun; Liu, Nishuang; Liu, Weijie; Zhang, Hui; Ma, Yanan; Yang, Congxing; Su, Jun; Li, Luying; Long, Fei; Zou, Zhengguang; Gao, Yihua

2016-12-27

Nowadays, the integrated systems on a plane substrate containing energy harvesting, energy storing, and working units are strongly desired with the fast development of wearable and portable devices. Here, a simple, low cost, and scalable strategy involving ink printing and electrochemical deposition is proposed to fabricate a flexible integrated system on a plane substrate containing an all-solid-state asymmetric microsupercapacitor (MSC), a photoconduct-type photodetector of perovskite nanowires (NWs), and a wireless charging coil. In the asymmetric MSCs, MnO 2 -PPy and V 2 O 5 -PANI composites are used as positive and negative electrodes, respectively. Typical values of energy density in the range of 15-20 mWh cm -3 at power densities of 0.3-2.5 W cm -3 with an operation potential window of 1.6 V are achieved. In the system, the wireless charging coil receives energy from a wireless power transmitter, which then can be stored in the MSC to drive the photoconductive detector of perovskite NWs in sequence. The designed integrated system exhibits a stable photocurrent response comparable with the detector driven by an external power source. This research provides an important routine to fabricate integrated systems.

Comprehensive security framework for the communication and storage of medical images

NASA Astrophysics Data System (ADS)

Slik, David; Montour, Mike; Altman, Tym

2003-05-01

Confidentiality, integrity verification and access control of medical imagery and associated metadata is critical for the successful deployment of integrated healthcare networks that extend beyond the department level. As medical imagery continues to become widely accessed across multiple administrative domains and geographically distributed locations, image data should be able to travel and be stored on untrusted infrastructure, including public networks and server equipment operated by external entities. Given these challenges associated with protecting large-scale distributed networks, measures must be taken to protect patient identifiable information while guarding against tampering, denial of service attacks, and providing robust audit mechanisms. The proposed framework outlines a series of security practices for the protection of medical images, incorporating Transport Layer Security (TLS), public and secret key cryptography, certificate management and a token based trusted computing base. It outlines measures that can be utilized to protect information stored within databases, online and nearline storage, and during transport over trusted and untrusted networks. In addition, it provides a framework for ensuring end-to-end integrity of image data from acquisition to viewing, and presents a potential solution to the challenges associated with access control across multiple administrative domains and institution user bases.

A Wearable Inertial Measurement Unit for Long-Term Monitoring in the Dependency Care Area

PubMed Central

Rodríguez-Martín, Daniel; Pérez-López, Carlos; Samà, Albert; Cabestany, Joan; Català, Andreu

2013-01-01

Human movement analysis is a field of wide interest since it enables the assessment of a large variety of variables related to quality of life. Human movement can be accurately evaluated through Inertial Measurement Units (IMU), which are wearable and comfortable devices with long battery life. The IMU's movement signals might be, on the one hand, stored in a digital support, in which an analysis is performed a posteriori. On the other hand, the signal analysis might take place in the same IMU at the same time as the signal acquisition through online classifiers. The new sensor system presented in this paper is designed for both collecting movement signals and analyzing them in real-time. This system is a flexible platform useful for collecting data via a triaxial accelerometer, a gyroscope and a magnetometer, with the possibility to incorporate other information sources in real-time. A μSD card can store all inertial data and a Bluetooth module is able to send information to other external devices and receive data from other sources. The system presented is being used in the real-time detection and analysis of Parkinson's disease symptoms, in gait analysis, and in a fall detection system. PMID:24145917

A wearable inertial measurement unit for long-term monitoring in the dependency care area.

PubMed

Rodríguez-Martín, Daniel; Pérez-López, Carlos; Samà, Albert; Cabestany, Joan; Català, Andreu

2013-10-18

Human movement analysis is a field of wide interest since it enables the assessment of a large variety of variables related to quality of life. Human movement can be accurately evaluated through Inertial Measurement Units (IMU), which are wearable and comfortable devices with long battery life. The IMU's movement signals might be, on the one hand, stored in a digital support, in which an analysis is performed a posteriori. On the other hand, the signal analysis might take place in the same IMU at the same time as the signal acquisition through online classifiers. The new sensor system presented in this paper is designed for both collecting movement signals and analyzing them in real-time. This system is a flexible platform useful for collecting data via a triaxial accelerometer, a gyroscope and a magnetometer, with the possibility to incorporate other information sources in real-time. A µSD card can store all inertial data and a Bluetooth module is able to send information to other external devices and receive data from other sources. The system presented is being used in the real-time detection and analysis of Parkinson's disease symptoms, in gait analysis, and in a fall detection system.

Broken rail track detection using smart materials

NASA Astrophysics Data System (ADS)

Bouteiller, Fanny; Grisso, Benjamin L.; Peairs, Daniel M.; Inman, Daniel J.

2006-03-01

Rail lines are subject to many types of damage that, in the worst cases, can cause train derailments. The damage can arise from either manufacturing defects or external factors, possibly even terrorist acts to disrupt the civil infrastructure. Current rail inspection techniques require train traffic to be interrupted while workers and equipment move along the track. Moreover, a technician with rail testing experience is required to analyze the results. This paper focuses on simple proof of concept experiments to determine if impedance based structural health monitoring may be used to detect anomalies in rail tracks, and in particular broken rails. The technique applies a very low voltage (one volt) high frequency wave to a structure, measures its response and determines the location and extent of a rail break. The monitoring device is envisioned to run off of ambient vibration and thermal gradients provided by passing trains and daily thermal cycles, store the energy and utilize the stored energy periodically to inspect the track (according to the track usage schedule). If damage occurs or starts to occur, a warning signal would be transmitted to substation then broadcast to the appropriate operator listing the location and extent of the damage.

The structural diversity of artificial genetic polymers

PubMed Central

Anosova, Irina; Kowal, Ewa A.; Dunn, Matthew R.; Chaput, John C.; Van Horn, Wade D.; Egli, Martin

2016-01-01

Synthetic genetics is a subdiscipline of synthetic biology that aims to develop artificial genetic polymers (also referred to as xeno-nucleic acids or XNAs) that can replicate in vitro and eventually in model cellular organisms. This field of science combines organic chemistry with polymerase engineering to create alternative forms of DNA that can store genetic information and evolve in response to external stimuli. Practitioners of synthetic genetics postulate that XNA could be used to safeguard synthetic biology organisms by storing genetic information in orthogonal chromosomes. XNA polymers are also under active investigation as a source of nuclease resistant affinity reagents (aptamers) and catalysts (xenozymes) with practical applications in disease diagnosis and treatment. In this review, we provide a structural perspective on known antiparallel duplex structures in which at least one strand of the Watson–Crick duplex is composed entirely of XNA. Currently, only a handful of XNA structures have been archived in the Protein Data Bank as compared to the more than 100 000 structures that are now available. Given the growing interest in xenobiology projects, we chose to compare the structural features of XNA polymers and discuss their potential to access new regions of nucleic acid fold space. PMID:26673703

Challenges to Healthy Eating Practices: A Qualitative Study of Non-Hispanic Black Men Living With Diabetes.

PubMed

Lee, Loretta T; Willig, Amanda L; Agne, April A; Locher, Julie L; Cherrington, Andrea L

2016-06-01

The purpose of this study was to explore current dietary practices and perceived barriers to healthy eating in non-Hispanic black men with type 2 diabetes. Four 90-minute focus groups held in September and October 2011 were led by a trained moderator with a written guide to facilitate discussion on dietary practices and barriers to healthy eating. Participants were recruited from the diabetes database at a public safety-net health system in Jefferson County, Alabama. Two-independent reviewers performed content analysis to identify major themes using a combined deductive and inductive approach. There were 34 male participants aged 18 years and older. Mean years living with diabetes was 9.6 ± 5.9. Sixty-two percent of participants perceived themselves to be in fair or poor health. Participants' self-reported eating practices did not always relate to hunger. Internal cues to eat included habit and response to emotions, and external cues to eat included media messaging, medication regimens, and work schedules. Men identified multiple barriers to healthy eating including hard-to-break habits, limited resources and availability of food at home and in neighborhood grocery stores, and perceived poor communication with health care professionals. Non-Hispanic black men acknowledged the importance of healthy eating as part of diabetes self-management but reported various internal and external challenges that present barriers to healthy eating. Tailored strategies to overcome barriers to healthy eating among non-Hispanic black men should be developed and tested for their impact on diabetes self-management. © 2016 The Author(s).

Challenges to healthy eating practices: A qualitative study of non-Hispanic black men living with diabetes

PubMed Central

Lee, Loretta T.; Willig, Amanda L.; Agne, April A.; Locher, Julie L.; Cherrington, Andrea L.

2016-01-01

Purpose The purpose of this study was to explore current dietary practices and perceived barriers to healthy eating in non-Hispanic black men with type 2 diabetes. Methods Four 90-minute focus groups held in September and October, 2011 were led by a trained moderator with a written guide to facilitate discussion on dietary practices and barriers to healthy eating. Participants were recruited from the diabetes database at a public safety-net health system in Jefferson County, Alabama. Two-independent reviewers (LTL and ALW) performed content analysis to identify major themes using a combined deductive and inductive approach. Results There were 34 male participants aged 18 years and older. Mean years living with diabetes was 9.6 ± 5.9. Sixty-two percent of participants perceived themselves to be in fair or poor health. Participants’ self-reported eating practices did not always relate to hunger. Internal cues to eat included habit and response to emotions; and external cues to eat included media messaging, medication regimens, and work schedules. Men identified multiple barriers to healthy eating including hard-to-break habits, limited resources and availability of food at home and in neighborhood grocery stores, and perceived poor health-care professional communication. Conclusion Non-Hispanic black men acknowledged the importance of healthy eating as part of diabetes self-management, but reported various internal and external challenges that present barriers to healthy eating. Tailored strategies to overcome barriers to healthy eating among non-Hispanic black men should be developed and tested for their impact on diabetes self-management. PMID:27036128

Long-term information and distributed neural activation are relevant for the "internal features advantage" in face processing: electrophysiological and source reconstruction evidence.

PubMed

Olivares, Ela I; Saavedra, Cristina; Trujillo-Barreto, Nelson J; Iglesias, Jaime

2013-01-01

In face processing tasks, prior presentation of internal facial features, when compared with external ones, facilitates the recognition of subsequently displayed familiar faces. In a previous ERP study (Olivares & Iglesias, 2010) we found a visibly larger N400-like effect when identity mismatch familiar faces were preceded by internal features, as compared to prior presentation of external ones. In the present study we contrasted the processing of familiar and unfamiliar faces in the face-feature matching task to assess whether the so-called "internal features advantage" relies mainly on the use of stored face-identity-related information or if it might operate independently from stimulus familiarity. Our participants (N = 24) achieved better performance with internal features as primes and, significantly, with familiar faces. Importantly, ERPs elicited by identity mismatch complete faces displayed a negativity around 300-600 msec which was clearly enhanced for familiar faces primed by internal features when compared with the other experimental conditions. Source reconstruction showed incremented activity elicited by familiar stimuli in both posterior (ventral occipitotemporal) and more anterior (parahippocampal (ParaHIP) and orbitofrontal) brain regions. The activity elicited by unfamiliar stimuli was, in general, located in more posterior regions. Our findings suggest that the activation of multiple neural codes is required for optimal individuation in face-feature matching and that a cortical network related to long-term information for face-identity processing seems to support the internal feature effect. Copyright © 2013 Elsevier Ltd. All rights reserved.

The Effect of Mystery Shopper Reports on Age Verification for Tobacco Purchases

PubMed Central

KREVOR, BRAD S.; PONICKI, WILLIAM R.; GRUBE, JOEL W.; DeJONG, WILLIAM

2011-01-01

Mystery shops (MS) involving attempted tobacco purchases by young buyers have been employed to monitor retail stores’ performance in refusing underage sales. Anecdotal evidence suggests that MS visits with immediate feedback to store personnel can improve age verification. This study investigated the impact of monthly and twice-monthly MS reports on age verification. Forty-five Walgreens stores were each visited 20 times by mystery shoppers. The stores were randomly assigned to one of three conditions. Control group stores received no feedback, whereas two treatment groups received feedback communications every visit (twice monthly) or every second visit (monthly) after baseline. Logit regression models tested whether each treatment group improved verification rates relative to the control group. Post-baseline verification rates were higher in both treatment groups than in the control group, but only the stores receiving monthly communications had a significantly greater improvement than control group stores. Verification rates increased significantly during the study period for all three groups, with delayed improvement among control group stores. Communication between managers regarding the MS program may account for the delayed age-verification improvements observed in the control group stores. Encouraging inter-store communication might extend the benefits of MS programs beyond those stores that receive this intervention. PMID:21541874

Corner Store Inventories, Purchases, and Strategies for Intervention: A Review of the Literature

PubMed Central

Langellier, Brent A; Garza, Jeremiah R; Prelip, Michael L; Glik, Deborah; Brookmeyer, Ron; Ortega, Alexander N

2014-01-01

Introduction An increasingly popular strategy to improving the food retail environment and promoting healthy eating in low-income and minority communities is the corner store conversion. This approach involves partnering with small ‘corner’ food stores to expand access to high-quality fruits, vegetables, and other healthy foods. Methods We conducted a structured review of the literature to assess inventories and sales in corner stores, as well as to identify intervention strategies employed by corner store conversions. Results Our review returned eight descriptive studies that discussed corner store inventories and sales, as well as ten intervention studies discussing six unique corner store conversion interventions in the United States, the Marshall Islands, and Canada. Common intervention strategies included: 1) partnering with an existing store, 2) stocking healthy foods, and 3) social marketing and nutrition education. We summarize each strategy and review the effectiveness of overall corner store conversions at changing peoples’ food purchasing, preparation, and consumption behaviors. Conclusions Consumption of fresh, healthy, affordable foods could be improved by supporting existing retailers to expand their selection of healthy foods and promoting healthy eating at the neighborhood level. Additional corner store conversions should be conducted to determine the effectiveness and importance of specific intervention strategies. PMID:25374481

The effect of mystery shopper reports on age verification for tobacco purchases.

PubMed

Krevor, Brad S; Ponicki, William R; Grube, Joel W; DeJong, William

2011-09-01

Mystery shops involving attempted tobacco purchases by young buyers have been implemented in order to monitor retail stores' performance in refusing underage sales. Anecdotal evidence suggests that mystery shop visits with immediate feedback to store personnel can improve age verification. This study investigated the effect of monthly and twice-monthly mystery shop reports on age verification. Mystery shoppers visited 45 Walgreens stores 20 times. The stores were randomly assigned to 1 of 3 conditions. Control group stores received no feedback, whereas 2 treatment groups received feedback communications on every visit (twice monthly) or on every second visit (monthly) after baseline. Logit regression models tested whether each treatment group improved verification rates relative to the control group. Postbaseline verification rates were higher in both treatment groups than in the control group, but only the stores receiving monthly communications had a significantly greater improvement compared with the control group stores. Verification rates increased significantly during the study period for all 3 groups, with delayed improvement among control group stores. Communication between managers regarding the mystery shop program may account for the delayed age-verification improvements observed in the control group stores. Encouraging interstore communication might extend the benefits of mystery shop programs beyond those stores that receive this intervention. Copyright © Taylor & Francis Group, LLC

Food Availability in School Stores in Seoul, South Korea After Implementation of Food- and Nutrient-Based Policies.

PubMed

Choi, Seul Ki; Frongillo, Edward A; Blake, Christine E; Thrasher, James F

2017-07-01

To improve school store food environments, the South Korean government implemented 2 policies restricting unhealthy food sales in school stores. A food-based policy enacted in 2007 restricts specific food sales (soft drinks); and a nutrient-based policy enacted in 2009 restricts energy-dense and nutrient-poor (EDNP) food sales. The purpose of the study was to assess how the 2 policies have changed the school store food environment. Foods sold in school stores in Seoul, South Korea were observed before (2006, 15 stores) and after (2013, 12 stores) implementation of the school store policies. Food availability in school stores in 2006 and 2013 was compared and EDNP food availability in 2013 was examined. When controlling the total number of foods sold in school stores and school characteristics, the mean number of soft drinks sold in a school store in 2013 (0.3 items) was significantly lower than in 2006 (1.9 items, p = .032). Soft drinks were still available in 50% of school stores observed in 2013, with all school stores selling EDNP foods in 2013. South Korean policies have had a modest influence on availability of unhealthy school store foods. Alternative strategies to improve school store food environments are needed. © 2017, American School Health Association.

Food deserts in Leon County, FL: disparate distribution of Supplemental Nutrition Assistance Program-accepting stores by neighborhood characteristics.

PubMed

Rigby, Samantha; Leone, Angela F; Kim, Hwahwan; Betterley, Connie; Johnson, Mary Ann; Kurtz, Hilda; Lee, Jung Sun

2012-01-01

Examine whether neighborhood characteristics of racial composition, income, and rurality were related to distribution of Supplemental Nutrition Assistance Program (SNAP)-accepting stores in Leon County, Florida. Cross-sectional; neighborhood and food store data collected in 2008. Forty-eight census tracts as proxy of neighborhoods in Leon County, Florida. All stores and SNAP-accepting stores were identified from a commercial business directory and a United States Department of Agriculture SNAP-accepting store list, respectively (n = 288). Proportion of SNAP-accepting stores across neighborhoods. Descriptive statistics to describe distribution of SNAP-accepting stores by neighborhood characteristics. Proportions of SNAP-accepting stores were compared by neighborhood characteristics with Wilcoxon-Mann-Whitney and Kruskal-Wallis tests. Of 288 available stores, 45.1% accepted SNAP benefits. Of the 48 neighborhoods, 16.7% had no SNAP-accepting stores. Proportions of SNAP-accepting grocery stores were significantly different by neighborhood racial composition and income. Primarily black neighborhoods did not have any supermarkets. Results were mixed with regard to distribution of food stores and SNAP-accepting stores by neighborhood racial composition, income, and rurality. This study suggests disparities in distribution of SNAP-accepting stores across neighborhood characteristics of racial composition, income, and rurality. Copyright © 2012 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Sugars, Sweet Taste Receptors, and Brain Responses

PubMed Central

Lee, Allen A.; Owyang, Chung

2017-01-01

Sweet taste receptors are composed of a heterodimer of taste 1 receptor member 2 (T1R2) and taste 1 receptor member 3 (T1R3). Accumulating evidence shows that sweet taste receptors are ubiquitous throughout the body, including in the gastrointestinal tract as well as the hypothalamus. These sweet taste receptors are heavily involved in nutrient sensing, monitoring changes in energy stores, and triggering metabolic and behavioral responses to maintain energy balance. Not surprisingly, these pathways are heavily regulated by external and internal factors. Dysfunction in one or more of these pathways may be important in the pathogenesis of common diseases, such as obesity and type 2 diabetes mellitus. PMID:28672790

KSC-2009-5823

NASA Image and Video Library

2009-10-24

CAPE CANAVERAL, Fla. – External tank 134 is towed toward the Vehicle Assembly Building, or VAB, at NASA's Kennedy Space Center in Florida. The Pegasus barge, carrying the fuel tank, arrived in Florida after an ocean voyage towed by a solid rocket booster retrieval ship from NASA's Michoud Assembly Facility near New Orleans. Next, the tank will be transported into the VAB where it will be stored until needed. ET-134 will be used to launch space shuttle Endeavour on the STS-130 mission to the International Space Station. Launch is targeted for Feb. 4, 2010. For information on the components of the space shuttle and the STS-130 mission, visit http://www.nasa.gov/shuttle. Photo credit: NASA/Jack Pfaller

KSC-2009-5822

NASA Image and Video Library

2009-10-24

CAPE CANAVERAL, Fla. – External tank 134 emerges from the Pegasus barge docked in the turn basin near the Vehicle Assembly Building, or VAB, at NASA's Kennedy Space Center in Florida. Pegasus arrived in Florida after an ocean voyage towed by a solid rocket booster retrieval ship from NASA's Michoud Assembly Facility near New Orleans. The fuel tank next will be transported into the VAB where it will be stored until needed. ET-134 will be used to launch space shuttle Endeavour on the STS-130 mission to the International Space Station. Launch is targeted for Feb. 4, 2010. For information on the components of the space shuttle and the STS-130 mission, visit http://www.nasa.gov/shuttle. Photo credit: NASA/Jack Pfaller

Metabolic changes sustain the plant life in low-sulfur environments.

PubMed

Maruyama-Nakashita, Akiko

2017-10-01

Plants assimilate inorganic sulfate into various organic sulfur (S) compounds, which contributes to the global sulfur cycle in the environment as well as the nutritional supply of this essential element to animals. Plants, to sustain their lives, adapt the flow of their S metabolism to respond to external S status by activating S assimilation and catabolism of stored S compounds, and by repressing the synthesis of secondary S metabolites like glucosinolates. The molecular mechanism of this response has been gradually revealed, including the discovery of several regulatory proteins and enzymes involved in S deficiency responses. Recent progress in this research area and the remaining issues are reviewed here. Copyright © 2017 Elsevier Ltd. All rights reserved.

Extensions and improvements on XTRAN3S

NASA Technical Reports Server (NTRS)

Borland, C. J.

1989-01-01

Improvements to the XTRAN3S computer program are summarized. Work on this code, for steady and unsteady aerodynamic and aeroelastic analysis in the transonic flow regime has concentrated on the following areas: (1) Maintenance of the XTRAN3S code, including correction of errors, enhancement of operational capability, and installation on the Cray X-MP system; (2) Extension of the vectorization concepts in XTRAN3S to include additional areas of the code for improved execution speed; (3) Modification of the XTRAN3S algorithm for improved numerical stability for swept, tapered wing cases and improved computational efficiency; and (4) Extension of the wing-only version of XTRAN3S to include pylon and nacelle or external store capability.

Recordkeeping alters economic history by promoting reciprocity

PubMed Central

Basu, Sudipta; Dickhaut, John; Hecht, Gary; Towry, Kristy; Waymire, Gregory

2009-01-01

We experimentally demonstrate a causal link between recordkeeping and reciprocal exchange. Recordkeeping improves memory of past interactions in a complex exchange environment, which promotes reputation formation and decision coordination. Economies with recordkeeping exhibit a beneficially altered economic history where the risks of exchanging with strangers are substantially lessened. Our findings are consistent with prior assertions that complex and extensive reciprocity requires sophisticated memory to store information on past transactions. We offer insights on this research by scientifically demonstrating that reciprocity can be facilitated by information storage external to the brain. This is consistent with the archaeological record, which suggests that prehistoric transaction records and the invention of writing for recordkeeping were linked to increased complexity in human interaction. PMID:19147843

Precision measurement of magnetic characteristics of an article with nullification of external magnetic fields

NASA Technical Reports Server (NTRS)

Honess, Shawn B. (Inventor); Narvaez, Pablo (Inventor); Mcauley, James M. (Inventor)

1992-01-01

An apparatus for characterizing the magnetic field of a device under test is discussed. The apparatus is comprised of five separate devices: (1) a device for nullifying the ambient magnetic fields in a test environment area with a constant applied magnetic field; (2) a device for rotating the device under test in the test environment area; (3) a device for sensing the magnetic field (to obtain a profile of the magnetic field) at a sensor location which is along the circumference of rotation; (4) a memory for storing the profiles; and (5) a processor coupled to the memory for characterizing the magnetic field of the device from the magnetic field profiles thus obtained.

A VLSI VAX chip set

NASA Astrophysics Data System (ADS)

Johnson, W. N.; Herrick, W. V.; Grundmann, W. J.

1984-10-01

For the first time, VLSI technology is used to compress the full functinality and comparable performance of the VAX 11/780 super-minicomputer into a 1.2 M transistor microprocessor chip set. There was no subsetting of the 304 instruction set and the 17 data types, nor reduction in hardware support for the 4 Gbyte virtual memory management architecture. The chipset supports an integral 8 kbyte memory cache, a 13.3 Mbyte/s system bus, and sophisticated multiprocessing. High performance is achieved through microcode optimizations afforded by the large control store, tightly coupled address and data caches, the use of internal and external 32 bit datapaths, the extensive aplication of both microlevel and macrolevel pipelining, and the use of specialized hardware assists.

Calculation of the Internal and External Risk of Stored Ammunition and Explosives by Means of the Computer Model RISKANAL

DTIC Science & Technology

1998-07-01

950.0 140.0 HS8 HS 8 8 5 0 420.0 50.0 HS9 HS 9 9 2 0 190.0 -245.0 HS10 HS 10 10 1 0 10.0 -245.0 HS11 HS 11 11 1 0 -150.0 50.0 RD1 RD 12 13 1000 50...Ceelen 8 DM&P TNO-DO 9 * DM&P TNO-DQ, accountco6rdinator KL 10* TNO-FEL, Bibliotheek 11 /13 Bibliotheek KMA 14* Lid Instituuts Advies Raad PML Prof. B...Vastgesteld door Maj. Wt. Ceelen Vastgesteld d.d. 9 juni 1998 (deze rubricering wijzigt niet) Titel Ongerubriceerd Managementuittreksel Ongerubriceerd

A matched case-control study of convenience store robbery risk factors.

PubMed

Hendricks, S A; Landsittel, D P; Amandus, H E; Malcan, J; Bell, J

1999-11-01

Convenience store clerks have been shown to be at high risk for assault and homicide, mostly owing to robbery or robbery attempts. Although the literature consistently indicates that at least some environmental designs are effective deterrents of robbery, the significance of individual interventions and policies has differed across past studies. To address these issues, a matched case-control study of 400 convenience store robberies in three metropolitan areas of Virginia was conducted. Conditional logistic regression was implemented to evaluate the significance of various environmental designs and other factors possibly related to convenience store robbery. Findings indicate that numerous characteristics of the surrounding environment and population were significantly associated with convenience store robbery. Results also showed that, on a univariate level, most crime prevention factors were significantly associated with a lower risk for robbery. Using a forward selection process, a multivariate model, which included cash handling policy, bullet-resistant shielding, and numerous characteristics of the surrounding area and population, was identified. This study addressed numerous limitations of the previous literature by prospectively collecting extensive data on a large sample of diverse convenience stores and directly addressing the current theory on the robbers' selection of a target store through a matched case-control design.

The Impact of Modern Retail Minimarket towards the Continuity of Traditional Retail Businesses

NASA Astrophysics Data System (ADS)

Masruroh, R.

2017-03-01

Today the business is growing rapidly minimarket with the development of socioeconomic conditions of society, and changes in value systems that result in changes to the pattern of life and needs of the community. In meeting the needs and desires, people tend to prefer a wide range of modern facilities expenditures. Thus increasing the number of modern minimarket store increasingly cornered the existence of traditional retail stores are stand-alone and based on social economy. This study aimed to analyze the changes in turnover and market traditional retail stores before and after the modern mini-market retail in the vicinity. To achieve these objectives, conducted survey research approach, this study uses primary and secondary data by distributing interviews and questionnaires to 40 respondents traditional retail store owners in the district of Kuningan which is selected by probability sampling. Descriptive qualitative were used to analyse this study. Based on the survey results revealed that there are significant differences between turnover and market traditional retail stores before and after the modern minimarket in the vicinity. This shows that the presence of modern retail stores provide a decrease in turnover and customers impact for traditional retail stores. But the research also shows that traditional retail stores that improve the quality of services and facilities are not affected by the presence of modern retail stores in the vicinity.

Response of a store with tunable natural frequencies in compressible cavity flow

DOE PAGES

Wagner, Justin L.; Casper, Katya Marie; Beresh, Steven J.; ...

2015-01-07

Fluid-structure interactions that occur during aircraft internal store carriage were experimentally explored at Mach 0.94 and 1.47 using a generic, aerodynamic store installed in a rectangular cavity having a length-to-depth ratio of 7. Similar to previous studies using a cylindrical store, the aerodynamic store responded to the cavity flow at its natural structural frequencies, and it exhibited a directionally dependent response to cavity resonance. Moreover, cavity tones excited the store in the streamwise and wall-normal directions consistently, whereas the spanwise response was much more limited.

Lessons Learned From Small Store Programs to Increase Healthy Food Access

PubMed Central

Gittelsohn, Joel; Laska, Melissa N.; Karpyn, Allison; Klingler, Kristen; Ayala, Guadalupe X.

2013-01-01

Objectives To document implementation challenges and opportunities associated with small store interventions. Methods Case study analysis of small store interventions conducted in 4 regions of the US. We systematically generated matrices to compare and contrast lessons learned to advance implementation science. Results Seven thematic areas were identified including: establishing relationships with stores, store owner and customer relationships, selection of intervention approaches, stocking healthier foods, evaluation, maintenance of changes, and dissemination. Conclusions This information provides guidance to researchers and practitioners wishing to design, implement, and evaluate small store interventions. PMID:24629559

Pregnancy outcomes using stallion epididymal sperm stored at 5 °C for 24 or 48 hours before harvest.

PubMed

Stawicki, R J; McDonnell, S M; Giguère, S; Turner, R M

2016-03-01

The cryopreservation of epididymal sperm can be useful in a variety of circumstances for ensuring genetic preservation of a valued stallion. Although early studies have reported pregnancy rates significantly lower than those achieved with cryopreserved ejaculated sperm, two recent studies report over 60% one-cycle pregnancy rates with epididymal sperm stored for 24 hours at 5 °C before harvest and cryopreservation. The aims of this study were to: (1) attempt to replicate the one-cycle pregnancy rate of over 60% using epididymal sperm cooled and stored within the epididymis for 24 hours before harvest and cryopreservation and (2) evaluate pregnancy outcome with sperm cooled and stored within the epididymis for 48 hours before sperm harvest and cryopreservation. Testicles were obtained from 13 stallions undergoing routine castration. The epididymides were stored at 5 °C for either 24 or 48 hours before sperm harvest and cryopreservation in an egg yolk and dimethylformamide-based freezing extender. Thirteen mares were bred on one cycle with cryopreserved epididymal sperm stored for 24 hours before harvest, and 10 of those 13 mares were also bred on a previous or subsequent cycle with samples from the same stallion that had been stored for 48 hours before harvest. Pregnancy occurred in 7 of the 13 inseminations of sperm stored for 24 hours before harvest, and in 4 of the 10 inseminations of sperm stored for 48 hours before harvest. The pregnancy rate using epididymal sperm stored for 24 hours before harvest is consistent with that of previous reports. In addition, these results provide evidence that pregnancies can be achieved when the epididymides are cooled and stored for 48 hours before sperm harvest and cryopreservation. Copyright © 2016 Elsevier Inc. All rights reserved.

Inhibition of Sphingosine Kinase 1 Ameliorates Angiotensin II-Induced Hypertension and Inhibits Transmembrane Calcium Entry via Store-Operated Calcium Channel

PubMed Central

Wilson, Parker C.; Fitzgibbon, Wayne R.; Garrett, Sara M.; Jaffa, Ayad A.; Luttrell, Louis M.; Brands, Michael W.

2015-01-01

Angiotensin II (AngII) plays a critical role in the regulation of vascular tone and blood pressure mainly via regulation of Ca2+ mobilization. Several reports have implicated sphingosine kinase 1 (SK1)/sphingosine 1-phosphate (S1P) in the mobilization of intracellular Ca2+ through a yet-undefined mechanism. Here we demonstrate that AngII-induces biphasic calcium entry in vascular smooth muscle cells, consisting of an immediate peak due to inositol tris-phosphate-dependent release of intracellular calcium, followed by a sustained transmembrane Ca2+ influx through store-operated calcium channels (SOCs). Inhibition of SK1 attenuates the second phase of transmembrane Ca2+ influx, suggesting a role for SK1 in AngII-dependent activation of SOC. Intracellular S1P triggers SOC-dependent Ca2+ influx independent of S1P receptors, whereas external application of S1P stimulated S1P receptor-dependent Ca2+ influx that is insensitive to inhibitors of SOCs, suggesting that the SK1/S1P axis regulates store-operated calcium entry via intracellular rather than extracellular actions. Genetic deletion of SK1 significantly inhibits both the acute hypertensive response to AngII in anaesthetized SK1 knockout mice and the sustained hypertensive response to continuous infusion of AngII in conscious animals. Collectively these data implicate SK1 as the missing link that connects the angiotensin AT1A receptor to transmembrane Ca2+ influx and identify SOCs as a potential intracellular target for SK1. PMID:25871850

Seismic detection system for blocking the dangerous installations in case of strong earthquake occurrence

NASA Astrophysics Data System (ADS)

Ghica, Daniela; Corneliu Rau, Dan; Ionescu, Constantin; Grigore, Adrian

2010-05-01

During the last 70 years, four major earthquakes occurred in the Vrancea seismic area affected Romania territory: 10 November 1940 (Mw = 7.7, 160 km depth), 4 March 1977 (Mw = 7.5, 100 km depth), 30 August 1986 (Mw = 7.2, 140 km depth), 30 May 30 1990 (Mw = 6.9, 80 km depth). Romania is a European country with significant seismicity. So far, the 1977 event had the most catastrophic consequences: about 33,000 residences were totally destroyed or partially deteriorated, 1,571 people dies and another 11,300 were injured. Moreover, 61 natural-gas pipelines were damaged, causing destructive fires. The total losses were estimated at 3 mld. U.S. dollars. Recent studies clearly pointed out that in case of a strong earthquake occurrence in Vrancea region (Ms above 7), the biggest danger regarding the major cities comes from explosions and fires started immediately after the earthquake, and the most important factor of risk are the natural gas distribution networks. The damages are strongly amplified by the fact that, simultaneously, water and electric energy lines distributions are damaged too, making impossible the efficient firemen intervention, for localizing the fire sources. Presently, in Romania safe and efficient accepted solutions for improving the buildings securing, using antiseismic protection of the dangerous installations as natural-gas pipelines are not available. Therefore, we propose a seismic detection system based on a seismically actuated gas shut-off valve, which is automatically shut down in case of a seismic shock. The device is intended to be installed in the natural-gas supply line outside of buildings, as well at each user (group of users), inside of the buildings. The seismic detection system for blocking the dangerous installations in case of a strong earthquake occurrence was designed on the basis of 12 criteria enforced by the US regulations for seismic valves, aimed to eliminate the critical situations as fluids and under pressure gases leakage caused by the seismic shocks. The system is mechanical actuated (no external power sources needed) and consists of two main parts: the element for energy accumulation, i.e. elicoidal spring, and the blocking system for shut-off and secured positioning of the installation. The criteria of the energy accumulating and storing are successfully accomplished by the torsion spring: the exact amount of needed mechanical energy is stored, the certain rotation couple is ensured, the mechanical energy is not influenced by the external factors (temperature, humidity, radiation etc.), the energy stored is time-stable and no energy loss is possible during the operation. The device is self-functioning, independent of any energy source, and the mechanism used in the locking system is not involving gravitational field; moreover, the blocking down energy is stored and adjustable, being possible to overrun several times the minimum necessary energy needed for locking the system, with a high level of stability. Additionally, the blocking system of the seismic valve remains closed (visibly) until the device is manually unblocked and armed, after a preliminary checking of the full installation functionality. The device conception and execution allow a very stable operation for more than 30 years. Since the fluid is not flowing through the blocking mechanism, the system can be successfully used for: natural gases installations, protection of GPL tanks, corrosive poisonous substances, polluting agents etc.

The Association between Food Security and Store-Specific and Overall Food Shopping Behaviors.

PubMed

Ma, Xiaonan; Liese, Angela D; Hibbert, James; Bell, Bethany A; Wilcox, Sara; Sharpe, Patricia A

2017-12-01

Food security is a severe problem in the United States. Few studies have examined its relationship with food shopping behaviors. This study aimed to examine the association between food security and store-specific and overall food shopping among residents of low-income neighborhoods. We conducted a cross-sectional study. Five hundred twenty-seven households were recruited from two counties in South Carolina from November 2013 to May 2014, and 474 households were included in the final analysis. Food security was assessed using the 18-item US-Household Food Security Module questionnaire, and classified into three categories: high or marginal food security (FS), low food security (LFS), and very low food security (VLFS). Store-specific shopping behaviors including frequency, store type, and transportation were queried via in-person interview for the three most-frequented grocery stores. Distance from participants' homes to their reported stores was calculated using Geographic Information Systems. Multivariate linear regression for analyses of distance and frequency and multinomial/ordinary logistic regression for analyses of store type and transportation were used. Compared to FS participants, a significantly higher proportion of VLFS participants reported a convenience/dollar store as their most-frequented store (odds ratio [OR] 2.31, 95% CI 1.08 to 4.95) or a lack of transportation (OR 2.04, 95% CI 1.25 to 3.33). They also shopped less frequently (b=-.31, P=0.03) at their third most-frequented store and traveled fewer total miles for shopping (b=-4.71, P=0.04). In analyses considering all stores jointly, LFS participants had lower odds of shopping at both supermarkets and convenience/dollar stores (OR 0.44, 95% CI 0.21 to 0.91) compared to food-secure residents. The current findings suggest that households with VLFS tend to shop more frequently in stores that have less-healthful options, such as convenience/dollar stores. These findings lend support to ongoing community and policy interventions aimed at improving food access among food-insecure populations. Copyright © 2017 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Evaporation suppression from water reservoirs using floating covers: Lab scale observations and model predictions

NASA Astrophysics Data System (ADS)

Or, D.; Lehmann, P.; Aminzadeh, M.; Sommer, M.; Wey, H.; Wunderli, H.; Breitenstein, D.

2016-12-01

The competition over dwindling fresh water resources is expected to intensify with projected increase in human population in arid regions, expansion of irrigated land and changes in climate and drought patterns. The volume of water stored in reservoirs would also increase to mitigate seasonal shortages due to rainfall variability and to meet irrigation water needs. By some estimates up to half of the stored water is lost to evaporation thereby exacerbating the water scarcity problem. Recently, there is an upsurge in the use of self-assembling floating covers to suppress evaporation, yet the design, and implementation remain largely empirical. Studies have shown that evaporation suppression is highly nonlinear, as also known from a century of research on gas exchange from plant leaves (that often evaporate as free water surfaces through stomata that are only 1% of leaf area). We report a systematic evaluation of different cover types and external drivers (radiation, wind, wind+radiation) on evaporation suppression and energy balance of a 1.4 m2 basin placed in a wind-tunnel. Surprisingly, evaporation suppression by black and white floating covers (balls and plates) were similar despite significantly different energy balance regimes over the cover surfaces. Moreover, the evaporation suppression efficiency was a simple function of the uncovered area (square root of the uncovered fraction) with linear relations with the covered area in some cases. The thermally decoupled floating covers offer an efficient solution to the evaporation suppression with limited influence of the surface energy balance (water temperature for black and white covers was similar and remained nearly constant). The results will be linked with a predictive evaporation-energy balance model and issues of spatial scales and long exposure times will be studied.

Designing an End-to-End System for Data Storage, Analysis, and Visualization for an Urban Environmental Observatory

NASA Astrophysics Data System (ADS)

McGuire, M. P.; Welty, C.; Gangopadhyay, A.; Karabatis, G.; Chen, Z.

2006-05-01

The urban environment is formed by complex interactions between natural and human dominated systems, the study of which requires the collection and analysis of very large datasets that span many disciplines. Recent advances in sensor technology and automated data collection have improved the ability to monitor urban environmental systems and are making the idea of an urban environmental observatory a reality. This in turn has created a number of potential challenges in data management and analysis. We present the design of an end-to-end system to store, analyze, and visualize data from a prototype urban environmental observatory based at the Baltimore Ecosystem Study, a National Science Foundation Long Term Ecological Research site (BES LTER). We first present an object-relational design of an operational database to store high resolution spatial datasets as well as data from sensor networks, archived data from the BES LTER, data from external sources such as USGS NWIS, EPA Storet, and metadata. The second component of the system design includes a spatiotemporal data warehouse consisting of a data staging plan and a multidimensional data model designed for the spatiotemporal analysis of monitoring data. The system design also includes applications for multi-resolution exploratory data analysis, multi-resolution data mining, and spatiotemporal visualization based on the spatiotemporal data warehouse. Also the system design includes interfaces with water quality models such as HSPF, SWMM, and SWAT, and applications for real-time sensor network visualization, data discovery, data download, QA/QC, and backup and recovery, all of which are based on the operational database. The system design includes both internet and workstation-based interfaces. Finally we present the design of a laboratory for spatiotemporal analysis and visualization as well as real-time monitoring of the sensor network.

Effects of different storage time on hatching results and some egg quality characteristics of rock partridge (A. graeca) (management and production).

PubMed

Günhan, S; Kirikçi, K

2017-06-01

In this research, partridge eggs were stored during zero to 7, 8 to 14, 15 to 21, 22 to 28, 29 to 35 and 36 to 42 d, respectively. The effect of different egg storage periods on egg protein and moisture rates, mineral contents, and some egg quality and hatching characteristics were investigated. The extension of egg storage times didn't affect the external quality features like shell weight, shell thickness, and albumen rate, but it affected the yolk weight, yolk index, albumen index, and Haugh unit (P < 0.05). Yolk weight was increased and yolk index, albumen index, and Haugh unit values were decreased with the extension of storage time. Different storage times of partridge eggs did not have important effects on the protein rates. Protein and humidity rate of the eggs were 14.21 and 67.64%, respectively. There were some elements such as S, P, Na, K, and Ca, but Al, Cd, Co, Mo, and Pb could not be found in the partridge eggs. There is no effect of the storage time on the mineral content of the egg. Storage time had negative effect on fertility and hatchability after 21 d of storage d, but no effect on hatchability of fertile eggs. As this study showed, partridge eggs are resistant to long storage times, as partridge egg proteins can resist degradation in the optimum storage times. To determine egg degradation, the study should be focused on partridge eggshell features, which are responsible for degradation. As a result of this research, partridge eggs can be stored for 21 d under optimum storage conditions without any negative hatchability results. © 2017 Poultry Science Association Inc.

Neighborhood socioeconomic characteristics and differences in the availability of healthy food stores and restaurants in Sao Paulo, Brazil

PubMed Central

Duran, Ana Clara; Diez Roux, Ana V; do Rosario DO Latorre, Maria; Jaime, Patricia C

2013-01-01

Differential access to healthy foods has been hypothesized to contribute to health disparities, but evidence from low and middle-income countries is still scarce. This study examines whether the access of healthy foods varies across store types and neighborhoods of different socioeconomic statuses (SES) in a large Brazilian city. A cross-sectional study was conducted in 2010–2011 across 52 census tracts. Healthy food access was measured by a comprehensive in-store data collection, summarized into two indexes developed for retail food stores (HFSI) and restaurants (HMRI). Descriptive analyses and multilevel models were used to examine associations of store type and neighborhood SES with healthy food access. Fast food restaurants were more likely to be located in low SES neighborhoods whereas supermarkets and full service restaurants were more likely to be found in higher SES neighborhoods. Multilevel analyses showed that both store type and neighborhood SES were independently associated with in-store food measures. We found differences in the availability of healthy food stores and restaurants in Sao Paulo city favoring middle and high SES neighborhoods. PMID:23747923

Race and food store availability in an inner-city neighbourhood.

PubMed

Galvez, Maida P; Morland, Kimberly; Raines, Cherita; Kobil, Jessica; Siskind, Jodi; Godbold, James; Brenner, Barbara

2008-06-01

A growing body of research has shown that disparities in resources, including food stores, exist at the neighbourhood level and the greatest disparities are seen in minority neighbourhoods, the same neighbourhoods at increased risk of obesity and diabetes. Less is known about whether differences in availability of resources by African American or Latino race/ethnicity exist within a single minority community. The present study examined whether census blocks either 75% African American (AA) or 75% Latino (L) are associated with food store availability, as compared with racially mixed (RM) census blocks, in East Harlem, New York. A cross-sectional study utilising a walking survey of East Harlem was performed. Food stores were classified into: supermarkets, grocery stores, convenience stores, specialty stores, full-service restaurants and fast-food stores. One hundred and sixty-five East Harlem census blocks were examined; 17 were AA, 34 were L and 114 were RM. Of AA census blocks, 100% had neither supermarkets nor grocery stores. AA census blocks were less likely to have convenience stores (prevalence ratio (PR) = 0.25, 95% confidence interval (CI) 0.07-0.86) compared with RM census blocks. In contrast, predominantly L census blocks were more likely to have convenience stores (PR = 1.8, 95% CI 1.20-2.70), specialty food stores (PR = 3.74, 95% CI 2.06-7.15), full-service restaurants (PR = 1.87, 95% CI 1.04-3.38) and fast-food restaurants (PR = 2.14, 95% CI 1.33-3.44) compared with RM census blocks. We found that inequities in food store availability exist by race/ethnicity in East Harlem, New York. This has implications for racial/ethnic differences in dietary quality, obesity and obesity-related disorders.

Classification bias in commercial business lists for retail food stores in the U.S.

PubMed

Han, Euna; Powell, Lisa M; Zenk, Shannon N; Rimkus, Leah; Ohri-Vachaspati, Punam; Chaloupka, Frank J

2012-04-18

Aspects of the food environment such as the availability of different types of food stores have recently emerged as key modifiable factors that may contribute to the increased prevalence of obesity. Given that many of these studies have derived their results based on secondary datasets and the relationship of food stores with individual weight outcomes has been reported to vary by store type, it is important to understand the extent to which often-used secondary data correctly classify food stores. We evaluated the classification bias of food stores in Dun & Bradstreet (D&B) and InfoUSA commercial business lists. We performed a full census in 274 randomly selected census tracts in the Chicago metropolitan area and collected detailed store attributes inside stores for classification. Store attributes were compared by classification match status and store type. Systematic classification bias by census tract characteristics was assessed in multivariate regression. D&B had a higher classification match rate than InfoUSA for supermarkets and grocery stores, while InfoUSA was higher for convenience stores. Both lists were more likely to correctly classify large supermarkets, grocery stores, and convenience stores with more cash registers and different types of service counters (supermarkets and grocery stores only). The likelihood of a correct classification match for supermarkets and grocery stores did not vary systemically by tract characteristics whereas convenience stores were more likely to be misclassified in predominately Black tracts. Researches can rely on classification of food stores in commercial datasets for supermarkets and grocery stores whereas classifications for convenience and specialty food stores are subject to some systematic bias by neighborhood racial/ethnic composition.

Classification bias in commercial business lists for retail food stores in the U.S.

PubMed Central

2012-01-01

Background Aspects of the food environment such as the availability of different types of food stores have recently emerged as key modifiable factors that may contribute to the increased prevalence of obesity. Given that many of these studies have derived their results based on secondary datasets and the relationship of food stores with individual weight outcomes has been reported to vary by store type, it is important to understand the extent to which often-used secondary data correctly classify food stores. We evaluated the classification bias of food stores in Dun & Bradstreet (D&B) and InfoUSA commercial business lists. Methods We performed a full census in 274 randomly selected census tracts in the Chicago metropolitan area and collected detailed store attributes inside stores for classification. Store attributes were compared by classification match status and store type. Systematic classification bias by census tract characteristics was assessed in multivariate regression. Results D&B had a higher classification match rate than InfoUSA for supermarkets and grocery stores, while InfoUSA was higher for convenience stores. Both lists were more likely to correctly classify large supermarkets, grocery stores, and convenience stores with more cash registers and different types of service counters (supermarkets and grocery stores only). The likelihood of a correct classification match for supermarkets and grocery stores did not vary systemically by tract characteristics whereas convenience stores were more likely to be misclassified in predominately Black tracts. Conclusion Researches can rely on classification of food stores in commercial datasets for supermarkets and grocery stores whereas classifications for convenience and specialty food stores are subject to some systematic bias by neighborhood racial/ethnic composition. PMID:22512874

Longitudinal Associations Between Observed and Perceived Neighborhood Food Availability and Body Mass Index in a Multiethnic Urban Sample.

PubMed

Zenk, Shannon N; Mentz, Graciela; Schulz, Amy J; Johnson-Lawrence, Vicki; Gaines, Causandra R

2017-02-01

Blacks, Hispanics, and women of lower socioeconomic status tend to have a higher risk of obesity. Numerous studies over the past decade examined the role of the neighborhood food environment in body weight. However, few were longitudinal. This longitudinal study examined whether multiple measures of neighborhood food availability were associated with body mass index (BMI) in a predominately Black and Hispanic adult sample living in low- to moderate-income urban neighborhoods. This longitudinal study used two waves of data (2002, 2008), including interviewer-measured height and weight, from a community survey of adults ( n = 219). In both 2002 and 2008, multiple measures characterized neighborhood food availability: GIS-derived availability of retail food outlets (large grocery store, small grocery store, convenience store, liquor stores), observed fruit and vegetable availability (count of stores selling 10 or more fresh fruit or vegetable varieties), and perceived fruit and vegetable access. Random intercept models estimated multivariable associations, controlling for individual-level demographics and neighborhood median household income. Small grocery store availability was associated with 1.22-unit increase in BMI ( p = .047), while each unit increase in perceived fruit and vegetable access was associated with a 0.69-unit decrease in BMI ( p = .055). BMI was not associated with large grocery store, convenience store, or liquor store availability, or with observed fruit and vegetable availability. Findings suggest that improving the neighborhood food environment, particularly at small grocery stores, may help urban residents living in low- to moderate-income neighborhoods achieve healthier body weights over time.

Grocery store interventions to change food purchasing behaviors: a systematic review of randomized controlled trials

PubMed Central

Hartmann-Boyce, Jamie; Bianchi, Filippo; Piernas, Carmen; Riches, Sarah Payne; Frie, Kerstin; Nourse, Rebecca; Jebb, Susan A

2018-01-01

ABSTRACT Background Diet is an important determinant of health, and food purchasing is a key antecedent to consumption. Objective We set out to evaluate the effectiveness of grocery store interventions to change food purchasing, and to examine whether effectiveness varied based on intervention components, setting, or socioeconomic status. Design We conducted a systematic review of randomized controlled trials (search performed June 2017). Studies must have: aimed to change food purchasing; been implemented in grocery stores (real or simulated); reported purchasing; and had a minimal control or compared interventions fulfilling our criteria. Searching, screening, bias assessment, and data extraction followed Cochrane methods. We grouped studies by intervention type (economic, environmental, swaps, and/or education), synthesized results narratively, and conducted an exploratory qualitative comparative analysis. Results We included 35 studies representing 89 interventions, >20,000 participants, and >800 stores. Risk of bias was mixed. Economic interventions showed the most promise, with 8 of the 9 studies in real stores and all 6 in simulated environments detecting an effect on purchasing. Swap interventions appeared promising in the 2 studies based in real stores. Store environment interventions showed mixed effects. Education-only interventions appeared effective in simulated environments but not in real stores. Available data suggested that effects of economic interventions did not differ by socioeconomic status, whereas for other interventions impact was variable. In our qualitative comparative analysis, economic interventions (regardless of setting) and environmental and swap interventions in real stores were associated with statistically significant changes in purchasing in the desired direction for ≥1 of the foods targeted by the intervention, whereas education-only interventions in real stores were not. Conclusions Findings suggest that interventions implemented in grocery stores—particularly ones that manipulate price, suggest swaps, and perhaps manipulate item availability—have an impact on purchasing and could play a role in public health strategies to improve health. Review protocol registered at https://www.crd.york.ac.uk/PROSPERO/ as CRD42017068809. PMID:29868912

Technical Note: Development and validation of an open data format for CT projection data.

PubMed

Chen, Baiyu; Duan, Xinhui; Yu, Zhicong; Leng, Shuai; Yu, Lifeng; McCollough, Cynthia

2015-12-01

Lack of access to projection data from patient CT scans is a major limitation for development and validation of new reconstruction algorithms. To meet this critical need, this work developed and validated a vendor-neutral format for CT projection data, which will further be employed to build a library of patient projection data for public access. A digital imaging and communication in medicine (DICOM)-like format was created for CT projection data (CT-PD), named the DICOM-CT-PD format. The format stores attenuation information in the DICOM image data block and stores parameters necessary for reconstruction in the DICOM header under various tags (51 tags to store the geometry and scan parameters and 9 tags to store patient information). To validate the accuracy and completeness of the new format, CT projection data from helical scans of the ACR CT accreditation phantom were acquired from two clinical CT scanners (Somatom Definition Flash, Siemens Healthcare, Forchheim, Germany and Discovery CT750 HD, GE Healthcare, Waukesha, WI). After decoding (by the authors for Siemens, by the manufacturer for GE), the projection data were converted to the DICOM-CT-PD format. Off-line CT reconstructions were performed by internal and external reconstruction researchers using only the information stored in the DICOM-CT-PD files and the DICOM-CT-PD field definitions. Compared with the commercially reconstructed CT images, the off-line reconstructed images created using the DICOM-CT-PD format are similar in terms of CT numbers (differences of 5 HU for the bone insert and -9 HU for the air insert), image noise (±1 HU), and low contrast detectability (6 mm rods visible in both). Because of different reconstruction approaches, slightly different in-plane and cross-plane high contrast spatial resolution were obtained compared to those reconstructed on the scanners (axial plane: GE off-line, 7 lp/cm; GE commercial, 7 lp/cm; Siemens off-line, 8 lp/cm; Siemens commercial, 7 lp/cm. Coronal plane: Siemens off-line, 6 lp/cm; Siemens commercial, 8 lp/cm). A vendor-neutral extended DICOM format has been developed that enables open sharing of CT projection data from third-generation CT scanners. Validation of the format showed that the geometric parameters and attenuation information in the DICOM-CT-PD file were correctly stored, could be retrieved with use of the provided instructions, and contained sufficient data for reconstruction of CT images that approximated those from the commercial scanner.

Small food stores and availability of nutritious foods: a comparison of database and in-store measures, Northern California, 2009.

PubMed

Kersten, Ellen; Laraia, Barbara; Kelly, Maggi; Adler, Nancy; Yen, Irene H

2012-01-01

Small food stores are prevalent in urban neighborhoods, but the availability of nutritious food at such stores is not well known. The objective of this study was to determine whether data from 3 sources would yield a single, homogenous, healthful food store category that can be used to accurately characterize community nutrition environments for public health research. We conducted in-store surveys in 2009 on store type and the availability of nutritious food in a sample of nonchain food stores (n = 102) in 6 predominantly urban counties in Northern California (Alameda, Contra Costa, Marin, Sacramento, San Francisco, and Santa Clara). We compared survey results with commercial database information and neighborhood sociodemographic data by using independent sample t tests and classification and regression trees. Sampled small food stores yielded a heterogeneous group of stores in terms of store type and nutritious food options. Most stores were identified as convenience (54%) or specialty stores (22%); others were small grocery stores (19%) and large grocery stores (5%). Convenience and specialty stores were smaller and carried fewer nutritious and fresh food items. The availability of nutritious food and produce was better in stores in neighborhoods that had a higher percentage of white residents and a lower population density but did not differ significantly by neighborhood income. Commercial databases alone may not adequately categorize small food stores and the availability of nutritious foods. Alternative measures are needed to more accurately inform research and policies that seek to address disparities in diet-related health conditions.

Small Food Stores and Availability of Nutritious Foods: A Comparison of Database and In-Store Measures, Northern California, 2009

PubMed Central

Laraia, Barbara; Kelly, Maggi; Adler, Nancy; Yen, Irene H.

2012-01-01

Introduction Small food stores are prevalent in urban neighborhoods, but the availability of nutritious food at such stores is not well known. The objective of this study was to determine whether data from 3 sources would yield a single, homogenous, healthful food store category that can be used to accurately characterize community nutrition environments for public health research. Methods We conducted in-store surveys in 2009 on store type and the availability of nutritious food in a sample of nonchain food stores (n = 102) in 6 predominantly urban counties in Northern California (Alameda, Contra Costa, Marin, Sacramento, San Francisco, and Santa Clara). We compared survey results with commercial database information and neighborhood sociodemographic data by using independent sample t tests and classification and regression trees. Results Sampled small food stores yielded a heterogeneous group of stores in terms of store type and nutritious food options. Most stores were identified as convenience (54%) or specialty stores (22%); others were small grocery stores (19%) and large grocery stores (5%). Convenience and specialty stores were smaller and carried fewer nutritious and fresh food items. The availability of nutritious food and produce was better in stores in neighborhoods that had a higher percentage of white residents and a lower population density but did not differ significantly by neighborhood income. Conclusion Commercial databases alone may not adequately categorize small food stores and the availability of nutritious foods. Alternative measures are needed to more accurately inform research and policies that seek to address disparities in diet-related health conditions. PMID:22789445

New test techniques to evaluate near field effects for supersonic store carriage and separation

NASA Technical Reports Server (NTRS)

Sawyer, Wallace C.; Stallings, Robert L., Jr.; Wilcox, Floyd J., Jr.; Blair, A. B., Jr.; Monta, William J.; Plentovich, Elizabeth B.

1989-01-01

Store separation and store carriage drag studies were conducted. A primary purpose is to develop new experimental methods to evaluate near field effects of store separation and levels of store carriage drag associated with a variety of carriage techniques for different store shapes and arrangements. Flow field measurements consisting of surface pressure distributions and vapor screen photographs are used to analyze the variations of the store separation characteristics with cavity geometry. Store carriage drag measurements representative of tangent, semi-submerged, and internal carriage installations are presented and discussed. Results are included from both fully metric models and models with only metric segments (metric pallets) and the relative merits of the two are discussed. Carriage drag measurements for store installations on an aircraft parent body are compared both with prediction methods and with installations on a generic parent body.

Magnetic helices as metastable states of finite XY ferromagnetic chains: An analytical study

NASA Astrophysics Data System (ADS)

Popov, Alexander P.; Pini, Maria Gloria

2018-04-01

We investigated a simple but non trivial model, consisting of a chain of N classical XY spins with nearest neighbor ferromagnetic interaction, where each of the two end-point spins is assumed to be exchange-coupled to a fully-pinned fictitious spin. In the mean field approximation, the system might be representative of a soft ferromagnetic film sandwiched between two magnetically hard layers. We show that, while the ground state is ferromagnetic and collinear, the system can attain non-collinear metastable states in the form of magnetic helices. The helical solutions and their stability were studied analytically in the absence of an external magnetic field. There are four possible classes of solutions. Only one class is metastable, and its helical states contain an integer number of turns. Among the remaining unstable classes, there is a class of helices which contain an integer number of turns. Therefore, an integer number of turns in a helical configuration is a necessary, but not a sufficient, condition for metastability. These results may be useful to devise future applications of metastable magnetic helices as energy-storing elements.

Theoretical and Experimental Flow Cell Studies of a Hydrogen-Bromine Fuel Cell, Part 1. M.S. Thesis. Final Report

NASA Technical Reports Server (NTRS)

Savinell, R. F.; Fritts, S. D.

1986-01-01

There is increasing interest in hydrogen-bromine fuel cells as both primary and regenerative energy storage systems. One promising design for a hydrogen-bromine fuel cell is a negative half cell having only a gas phase, which is separated by a cationic exchange membrane from a positive half cell having an aqueous electrolyte. The hydrogen gas and the aqueous bromide solution are stored external to the cell. In order to calculate the energy storage capacity and to predict and assess the performance of a single cell, the open circuit potential (OCV) must be estimated for different states of change, under various conditions. Theoretical expressions were derived to estimate the OCV of a hydrogen-bromine fuel cell. In these expressions temperature, hydrogen pressure, and bromine and hydrobromic acid concentrations were taken into consideration. Also included are the effects of the Nafion membrance separator and the various bromide complex species. Activity coefficients were taken into account in one of the expressions. The sensitivity of these parameters on the calculated OCV was studied.

Microbial volatile organic compounds in moldy interiors: a long-term climate chamber study.

PubMed

Schuchardt, Sven; Strube, Andrea

2013-06-01

The present study simulated large-scale indoor mold damage in order to test the efficiency of air sampling for the detection of microbial volatile organic compounds (MVOCs). To do this, a wallpaper damaged by condensation was stored in a climate chamber (representing a hypothetical test room of 40 m(3) volume) and was inoculated with 14 typical indoor fungal strains. The chamber ventilation conditions were adjusted to common values found in moldy homes, and the mold growth was allowed to continue to higher than average values. The MVOC content of the chamber air was analyzed daily for a period of 105 days using coupled gas chromatography/mass spectrometry (GC-MS). This procedure guarantees MVOC profiling without external factors such as outdoor air, building materials, furniture, and occupants. However, only nine MVOCs could be detected during the sampling period, which indicates that the very low concentrated MVOCs are hardly accessible, even under these favorable conditions. Furthermore, most of the MVOCs that were detected cannot be considered as reliable indicators of mold growth in indoor environments. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Seasonal variation in blood and muscle oxygen stores attributed to diving behavior, environmental temperature and pregnancy in a marine predator, the California sea lion.

PubMed

Villegas-Amtmann, Stella; Atkinson, Shannon; Paras-Garcia, Alberto; Costa, Daniel P

2012-08-01

Survival depends on an animal's ability to find and acquire prey. In diving vertebrates, this ability is directly related to their physiological capability (e.g. oxygen stores). We studied the seasonal variation in oxygen stores, body temperature and body condition in California sea lions (Zalophus californianus) (CSL) as a function of seasonal variation in temperature, primary productivity, diving behavior and reproductive stage. During summer, blood oxygen stores were significantly greater and muscle oxygen stores were significantly lower than in winter. Total oxygen stores, body condition and body temperature did not change between seasons but variations in body temperature were greater during summer. Changes in oxygen stores are partly attributed to diving behavior, temperature and pregnancy that could increase oxygen consumption. Blood and muscle oxygen stores appear to be influenced by reproductive state. Blood oxygen stores are more likely influenced by diving behavior and temperature than muscle oxygen stores. Copyright © 2012 Elsevier Inc. All rights reserved.

Discrete Choice Model of Food Store Trips Using National Household Food Acquisition and Purchase Survey (FoodAPS).

PubMed

Hillier, Amy; Smith, Tony E; Whiteman, Eliza D; Chrisinger, Benjamin W

2017-09-27

Where households across income levels shop for food is of central concern within a growing body of research focused on where people live relative to where they shop, what they purchase and eat, and how those choices influence the risk of obesity and chronic disease. We analyzed data from the National Household Food Acquisition and Purchase Survey (FoodAPS) using a conditional logit model to determine where participants shop for food to be prepared and eaten at home and how individual and household characteristics of food shoppers interact with store characteristics and distance from home in determining store choice. Store size, whether or not it was a full-service supermarket, and the driving distance from home to the store constituted the three significant main effects on store choice. Overall, participants were more likely to choose larger stores, conventional supermarkets rather than super-centers and other types of stores, and stores closer to home. Interaction effects show that participants receiving Supplemental Nutrition Assistance Program (SNAP) were even more likely to choose larger stores. Hispanic participants were more likely than non-Hispanics to choose full-service supermarkets while White participants were more likely to travel further than non-Whites. This study demonstrates the value of explicitly spatial discrete choice models and provides evidence of national trends consistent with previous smaller, local studies.

Discrete Choice Model of Food Store Trips Using National Household Food Acquisition and Purchase Survey (FoodAPS)

PubMed Central

Hillier, Amy; Smith, Tony E.; Whiteman, Eliza D.

2017-01-01

Where households across income levels shop for food is of central concern within a growing body of research focused on where people live relative to where they shop, what they purchase and eat, and how those choices influence the risk of obesity and chronic disease. We analyzed data from the National Household Food Acquisition and Purchase Survey (FoodAPS) using a conditional logit model to determine where participants shop for food to be prepared and eaten at home and how individual and household characteristics of food shoppers interact with store characteristics and distance from home in determining store choice. Store size, whether or not it was a full-service supermarket, and the driving distance from home to the store constituted the three significant main effects on store choice. Overall, participants were more likely to choose larger stores, conventional supermarkets rather than super-centers and other types of stores, and stores closer to home. Interaction effects show that participants receiving Supplemental Nutrition Assistance Program (SNAP) were even more likely to choose larger stores. Hispanic participants were more likely than non-Hispanics to choose full-service supermarkets while White participants were more likely to travel further than non-Whites. This study demonstrates the value of explicitly spatial discrete choice models and provides evidence of national trends consistent with previous smaller, local studies. PMID:28953221

Toric-boson model: Toward a topological quantum memory at finite temperature

NASA Astrophysics Data System (ADS)

Hamma, Alioscia; Castelnovo, Claudio; Chamon, Claudio

2009-06-01

We discuss the existence of stable topological quantum memory at finite temperature. At stake here is the fundamental question of whether it is, in principle, possible to store quantum information for macroscopic times without the intervention from the external world, that is, without error correction. We study the toric code in two dimensions with an additional bosonic field that couples to the defects, in the presence of a generic environment at finite temperature: the toric-boson model. Although the coupling constants for the bare model are not finite in the thermodynamic limit, the model has a finite spectrum. We show that in the topological phase, there is a finite temperature below which open strings are confined and therefore the lifetime of the memory can be made arbitrarily (polynomially) long in system size. The interaction with the bosonic field yields a long-range attractive force between the end points of open strings but leaves closed strings and topological order intact.

Optimal operation management of fuel cell/wind/photovoltaic power sources connected to distribution networks

NASA Astrophysics Data System (ADS)

Niknam, Taher; Kavousifard, Abdollah; Tabatabaei, Sajad; Aghaei, Jamshid

2011-10-01

In this paper a new multiobjective modified honey bee mating optimization (MHBMO) algorithm is presented to investigate the distribution feeder reconfiguration (DFR) problem considering renewable energy sources (RESs) (photovoltaics, fuel cell and wind energy) connected to the distribution network. The objective functions of the problem to be minimized are the electrical active power losses, the voltage deviations, the total electrical energy costs and the total emissions of RESs and substations. During the optimization process, the proposed algorithm finds a set of non-dominated (Pareto) optimal solutions which are stored in an external memory called repository. Since the objective functions investigated are not the same, a fuzzy clustering algorithm is utilized to handle the size of the repository in the specified limits. Moreover, a fuzzy-based decision maker is adopted to select the 'best' compromised solution among the non-dominated optimal solutions of multiobjective optimization problem. In order to see the feasibility and effectiveness of the proposed algorithm, two standard distribution test systems are used as case studies.

Tobacco advertising in retail stores.

PubMed

Cummings, K M; Sciandra, R; Lawrence, J

1991-01-01

Recent studies have described tobacco advertising in the print media, on billboards, and through sponsorship of cultural and sporting events. However, little attention has been given to another common and unavoidable source of tobacco advertising, that which is encountered in retail stores. In July 1987, we conducted a survey of 61 packaged goods retail stores in Buffalo, NY, to assess the prevalence and type of point-of-sale tobacco advertising. In addition, store owners or managers were surveyed to determine their store's policy regarding tobacco advertising, receipt of monetary incentives from distributors for displaying tobacco ads, and willingness to display antitobacco ads. Six types of stores were involved in the study: 10 supermarkets, 10 privately owned grocery stores, 9 chain convenience food stores that do not sell gasoline, 11 chain convenience food stores that sell gasoline, 11 chain pharmacies, and 10 private pharmacies. Two-thirds of the stores displayed tobacco posters, and 87 percent had promotional items advertising tobacco products, primarily cigarettes. Larger stores, and those that were privately owned, tended to display more posters and promotional items. Eighty percent of tobacco product displays were for cigarettes, 16 percent for smokeless tobacco products, and 4 percent for cigars and pipe tobacco. Convenience stores selling gasoline had the most separate tobacco product displays. Of tobacco product displays, 24 percent were located adjacent to candy and snack displays. Twenty-nine of the 61 store owners or managers indicated that their store had a policy regulating the display of tobacco ads and tobacco product displays. Policies dealt primarily with the location of tobacco posters (for example, no ads in the window) and number of product displays. Only 14 shop owners or managers indicated that they had previously displayed antitobacco information; more than half (31 of 61) said that they would be willing to display antitobaccoads.In many stores space availability is a barrier to displaying antitobacco information. Materials should be designed that have some utility for the store, such as posters that list store hours or directional information (that is, in and out signs).Antitobacco messages could also be displayed on check out dividers, check out mats, shopping carts,shopping bags, and milk cartons. In chain stores,decisions regarding the display of antitobacco information are likely to be made at the corporate level. Standards encouraging retailers to adopt more responsible policies related to advertising and sale of tobacco products should be established.

Rice SPX-Major Facility Superfamily3, a Vacuolar Phosphate Efflux Transporter, Is Involved in Maintaining Phosphate Homeostasis in Rice1[OPEN

PubMed Central

Ying, Yinghui; Wang, Shoudong; Secco, David; Liu, Yu; Whelan, James; Tyerman, Stephen D.; Shou, Huixia

2015-01-01

To maintain a stable cytosol phosphate (Pi) concentration, plant cells store Pi in their vacuoles. When the Pi concentration in the cytosol decreases, Pi is exported from the vacuole into the cytosol. This export is mediated by Pi transporters on the tonoplast. In this study, we demonstrate that SYG1, PHO81, and XPR1 (SPX)-Major Facility Superfamily (MFS) proteins have a similar structure with yeast (Saccharomyces cerevisiae) low-affinity Pi transporters Phosphatase87 (PHO87), PHO90, and PHO91. OsSPX-MFS1, OsSPX-MFS2, and OsSPX-MFS3 all localized on the tonoplast of rice (Oryza sativa) protoplasts, even in the absence of the SPX domain. At high external Pi concentration, OsSPX-MFS3 could partially complement the yeast mutant strain EY917 under pH 5.5, which lacks all five Pi transporters present in yeast. In oocytes, OsSPX-MFS3 was shown to facilitate Pi influx or efflux depending on the external pH and Pi concentrations. In contrast to tonoplast localization in plants cells, OsSPX-MFS3 was localized to the plasma membrane when expressed in both yeast and oocytes. Overexpression of OsSPX-MFS3 results in decreased Pi concentration in the vacuole of rice tissues. We conclude that OsSPX-MFS3 is a low-affinity Pi transporter that mediates Pi efflux from the vacuole into cytosol and is coupled to proton movement. PMID:26424157

SIDS-toADF File Mapping Manual

NASA Technical Reports Server (NTRS)

McCarthy, Douglas; Smith, Matthew; Poirier, Diane; Smith, Charles A. (Technical Monitor)

2002-01-01

The "CFD General Notation System" (CGNS) consists of a collection of conventions, and conforming software, for the storage and retrieval of Computational Fluid Dynamics (CFD) data. It facilitates the exchange of data between sites and applications, and helps stabilize the archiving of aerodynamic data. This effort was initiated in order to streamline the procedures in exchanging data and software between NASA and its customers, but the goal is to develop CGNS into a National Standard for the exchange of aerodynamic data. The CGNS development team is comprised of members from Boeing Commercial Airplane Group, NASA-Ames, NASA-Langley, NASA-Lewis, McDonnell-Douglas Corporation (now Boeing-St. Louis), Air Force-Wright Lab., and ICEM-CFD Engineering. The elements of CGNS address all activities associated with the storage of data on external media and its movement to and from application programs. These elements include: 1) The Advanced Data Format (ADF) Database manager, consisting of both a file format specification and its I/O software, which handles the actual reading and writing of data from and to external storage media; 2) The Standard Interface Data Structures (SIDS), which specify the intellectual content of CFD data and the conventions governing naming and terminology; 3) The SIDS-to-ADF File Mapping conventions, which specify the exact location where the CFD data defined by the SIDS is to be stored within the ADF file(s); and 4) The CGNS Mid-level Library, which provides CFD-knowledgeable routines suitable for direct installation into application codes. The SIDS-toADF File Mapping Manual specifies the exact manner in which, under CGNS conventions, CFD data structures (the SIDS) are to be stored in (i.e., mapped onto) the file structure provided by the database manager (ADF). The result is a conforming CGNS database. Adherence to the mapping conventions guarantees uniform meaning and location of CFD data within ADF files, and thereby allows the construction of universal software to read and write the data.

Healthy Zero Energy Buildings (HZEB) Program - Cross-Sectional Study of Contaminant Levels, Source, Strengths, and Ventilation Rates in Retail Stores

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, Wanyu R.; Sidheswaran, Meera; Cohn, Sebastian

2014-02-01

This field study measured ventilation rates and indoor air quality parameters in 21 visits to retail stores in California. The data was collected to guide the development of new, science-based commercial building ventilation rate standards that balance the dual objectives of increasing energy efficiency and maintaining acceptable indoor air quality. Data collection occurred between September 2011 and March 2013. Three types of stores participated in this study: grocery stores, furniture/hardware stores, and apparel stores. Ventilation rates and indoor air contaminant concentrations were measured on a weekday, typically between 9 am and 6 pm. Ventilation rates measured using a tracer gasmore » decay method exceeded the minimum requirement of California’s Title 24 Standard in all but one store. Even though there was adequate ventilation according to Title 24, concentrations of formaldehyde, acetaldehyde, and acrolein exceeded the most stringent chronic health guidelines. Other indoor air contaminants measured included carbon dioxide (CO{sub 2}), carbon monoxide (CO), ozone (O{sub 3}), and particulate matter (PM). Concentrations of CO{sub 2} were kept low by adequate ventilation, and were assumed low also because the sampling occurred on a weekday when retail stores were less busy. CO concentrations were also low. The indoor-outdoor ratios of O{sub 3} showed that the first-order loss rate may vary by store trade types and also by ventilation mode (mechanical versus natural). Analysis of fine and ultrafine PM measurements showed that a substantial portion of the particle mass in grocery stores with cooking-related emissions was in particles less than 0.3 μm. Stores without cooking as an indoor source had PM size distributions that were more similar indoors and outdoors. The whole-building emission rates of volatile organic compounds (VOCs) and PM were estimated from the measured ventilation rates and indoor and outdoor contaminant concentrations. Mass balance models were then used to determine the ventilation rates, filtration strategies, or source reductions needed to maintain indoor contaminant concentrations below reference levels. Several scenarios of potential concern were considered: (i) formaldehyde levels in furniture/hardware stores, (ii) contaminants associated with cooking (e.g., PM, acrolein, and acetaldehyde) in grocery stores, and (iii) outdoor contaminants (e.g., PM and O{sub 3}) impacting stores that use natural ventilation. Estimated formaldehyde emission rates suggest that retail stores would need to ventilate at levels far exceeding the current Title 24 requirement to lower indoor concentrations below California’s stringent formaldehyde reference level. Given the high costs of providing ventilation but only modest chronic health benefit is expected, effective source control is an attractive alternative, as demonstrated by some retail stores in this study. Predictions showed that grocery stores need MERV 13 air filters, instead of MERV 8 filters that are more commonly used, to maintain indoor PM at levels that meet the chronic health standards for PM. Exposure to acrolein is a potential health concern in grocery stores, and should be addressed by increasing the use of kitchen range hoods or improving their contaminant removal efficiency. In stores that rely on natural ventilation, indoor PM can be a health concern if the stores are located in areas with high outdoor PM. This concern may be addressed by switching to mechanical ventilation when the outdoor air quality is poor, while continuing natural ventilation when outdoor air quality is good.« less

Operation storefront Hawaii: tobacco advertising and promotion in Hawaii stores.

PubMed

Glanz, Karen; Sutton, Nicole M; Jacob Arriola, Kimberly R

2006-01-01

Our objective was to explore the nature and location of tobacco product advertising and promotion in retail stores in Hawaii. We performed a cross-sectional study of tobacco product store-based advertisements, including the number, location (indoor/outdoor; proximity to candy, toys, school), size, and brand of the ads. Trained youth (ages 12-19 years) collected data on 3,151 advertisements and promotions among 184 stores. We found that most ads appeared indoors, and the most heavily advertised brand was Kool. Kool is also the most heavily smoked brand among youth in Hawaii. This study underscores the high visibility of retail store advertising and promotions (both indoor and outdoor) in places that attract the attention of youth.

Social life and sanitary risks: evolutionary and current ecological conditions determine waste management in leaf-cutting ants.

PubMed

Farji-Brener, Alejandro G; Elizalde, Luciana; Fernández-Marín, Hermógenes; Amador-Vargas, Sabrina

2016-05-25

Adequate waste management is vital for the success of social life, because waste accumulation increases sanitary risks in dense societies. We explored why different leaf-cutting ants (LCA) species locate their waste in internal nest chambers or external piles, including ecological context and accounting for phylogenetic relations. We propose that waste location depends on whether the environmental conditions enhance or reduce the risk of infection. We obtained the geographical range, habitat and refuse location of LCA from published literature, and experimentally determined whether pathogens on ant waste survived to the high soil temperatures typical of xeric habitats. The habitat of the LCA determined waste location after phylogenetic correction: species with external waste piles mainly occur in xeric environments, whereas those with internal waste chambers mainly inhabit more humid habitats. The ancestral reconstruction suggests that dumping waste externally is less derived than digging waste nest chambers. Empirical results showed that high soil surface temperatures reduce pathogen prevalence from LCA waste. We proposed that LCA living in environments unfavourable for pathogens (i.e. xeric habitats) avoid digging costs by dumping the refuse above ground. Conversely, in environments suitable for pathogens, LCA species prevent the spread of diseases by storing waste underground, presumably, a behaviour that contributed to the colonization of humid habitats. These results highlight the adaptation of organisms to the hygienic challenges of social living, and illustrate how sanitary behaviours can result from a combination of evolutionary history and current environmental conditions. © 2016 The Author(s).

Social life and sanitary risks: evolutionary and current ecological conditions determine waste management in leaf-cutting ants

PubMed Central

Farji-Brener, Alejandro G.; Elizalde, Luciana; Amador-Vargas, Sabrina

2016-01-01

Adequate waste management is vital for the success of social life, because waste accumulation increases sanitary risks in dense societies. We explored why different leaf-cutting ants (LCA) species locate their waste in internal nest chambers or external piles, including ecological context and accounting for phylogenetic relations. We propose that waste location depends on whether the environmental conditions enhance or reduce the risk of infection. We obtained the geographical range, habitat and refuse location of LCA from published literature, and experimentally determined whether pathogens on ant waste survived to the high soil temperatures typical of xeric habitats. The habitat of the LCA determined waste location after phylogenetic correction: species with external waste piles mainly occur in xeric environments, whereas those with internal waste chambers mainly inhabit more humid habitats. The ancestral reconstruction suggests that dumping waste externally is less derived than digging waste nest chambers. Empirical results showed that high soil surface temperatures reduce pathogen prevalence from LCA waste. We proposed that LCA living in environments unfavourable for pathogens (i.e. xeric habitats) avoid digging costs by dumping the refuse above ground. Conversely, in environments suitable for pathogens, LCA species prevent the spread of diseases by storing waste underground, presumably, a behaviour that contributed to the colonization of humid habitats. These results highlight the adaptation of organisms to the hygienic challenges of social living, and illustrate how sanitary behaviours can result from a combination of evolutionary history and current environmental conditions. PMID:27226469

Reaching youth at the point of sale: cigarette marketing is more prevalent in stores where adolescents shop frequently

PubMed Central

Henriksen, L; Feighery, E; Schleicher, N; Haladjian, H; Fortmann, S

2004-01-01

Objective: Although numerous studies describe the quantity and nature of tobacco marketing in stores, fewer studies examine the industry's attempts to reach youth at the point of sale. This study examines whether cigarette marketing is more prevalent in stores where adolescents shop frequently. Design, setting, and participants: Trained coders counted cigarette ads, products, and other marketing materials in a census of stores that sell tobacco in Tracy, California (n = 50). A combination of data from focus groups and in-class surveys of middle school students (n = 2125) determined which of the stores adolescents visited most frequently. Main outcome measures: Amount of marketing materials and shelf space measured separately for the three cigarette brands most popular with adolescent smokers and for other brands combined. Results: Compared to other stores in the same community, stores where adolescents shopped frequently contained almost three times more marketing materials for Marlboro, Camel, and Newport, and significantly more shelf space devoted to these brands. Conclusions: Regardless of whether tobacco companies intentionally target youth at the point of sale, these findings underscore the importance of strategies to reduce the quantity and impact of cigarette marketing materials in this venue. PMID:15333890

Reaching youth at the point of sale: cigarette marketing is more prevalent in stores where adolescents shop frequently.

PubMed

Henriksen, L; Feighery, E C; Schleicher, N C; Haladjian, H H; Fortmann, S P

2004-09-01

Although numerous studies describe the quantity and nature of tobacco marketing in stores, fewer studies examine the industry's attempts to reach youth at the point of sale. This study examines whether cigarette marketing is more prevalent in stores where adolescents shop frequently. Trained coders counted cigarette ads, products, and other marketing materials in a census of stores that sell tobacco in Tracy, California (n = 50). A combination of data from focus groups and in-class surveys of middle school students (n = 2125) determined which of the stores adolescents visited most frequently. Amount of marketing materials and shelf space measured separately for the three cigarette brands most popular with adolescent smokers and for other brands combined. Compared to other stores in the same community, stores where adolescents shopped frequently contained almost three times more marketing materials for Marlboro, Camel, and Newport, and significantly more shelf space devoted to these brands. Regardless of whether tobacco companies intentionally target youth at the point of sale, these findings underscore the importance of strategies to reduce the quantity and impact of cigarette marketing materials in this venue.

Choice architecture to promote fruit and vegetable purchases by families participating in the Special Supplemental Program for Women, Infants, and Children (WIC): randomized corner store pilot study.

PubMed

Thorndike, Anne N; Bright, Oliver-John M; Dimond, Melissa A; Fishman, Ronald; Levy, Douglas E

2017-05-01

To conduct a pilot study to determine if improving the visibility and quality of fresh produce (choice architecture) in corner stores would increase fruit/vegetable purchases by families participating in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC). Six stores were randomly assigned to choice architecture intervention or control. Store-level WIC sales data were provided by the state. Primary outcomes were WIC fruit/vegetable voucher and non-fruit/vegetable voucher sales, comparing trends from baseline (December 2012-October 2013) with the five-month intervention period (December 2013-April 2014). Secondary outcomes were differences in customer self-reported fruit/vegetable purchases between baseline and end of the intervention. Chelsea, MA, USA, a low-income urban community. Adult customers (n 575) completing store exit interviews. During baseline, WIC fruit/vegetable and non-fruit/vegetable sales decreased in both intervention and control stores by $US 16/month. During the intervention period, WIC fruit/vegetable sales increased in intervention stores by $US 40/month but decreased in control stores by $US 23/month (difference in trends: $US 63/month; 95 % CI 4, 121 $US/month; P=0·036); WIC non-fruit/vegetable sales were not different (P=0·45). Comparing baseline and intervention-period exit interview responses by customers participating in WIC (n 134), intervention store customers reported increased fruit/vegetable purchases compared with control store customers (18 v. -2 %), but this did not achieve statistical significance (P=0·11). Placement of fruits/vegetables near the front of corner stores increased purchase of produce by customers using WIC. New policies that incentivize stores to stock and prominently display good-quality produce could promote healthier food choices of low-income families.

Fruit and vegetable purchasing and the relative density of healthy and unhealthy food stores: evidence from an Australian multilevel study.

PubMed

Mason, Kate E; Bentley, Rebecca J; Kavanagh, Anne M

2013-03-01

Evidence of a relationship between residential retail food environments and diet-related outcomes is inconsistent. One reason for this may be that food environments are typically defined in terms of the absolute number of particular store types in an area, whereas a measure of the relative number of healthy and unhealthy stores may be more appropriate. Using cross-sectional data from the VicLANES study conducted in Melbourne, Australia, multilevel logistic regression analysis was used to estimate the independent associations between absolute measures (numbers of healthy and unhealthy stores) and a relative measure (relative density of healthy stores) of the food environment, and self-reported variety of fruit and vegetable purchasing in local households. Purchasing behaviour was measured as the odds of purchasing above the median level of fruit and vegetables. Compared to households in areas where healthy food stores made up no more than 10% of all healthy and unhealthy stores, households in areas with 10.1-15.0% healthy food stores and >15% healthy stores had increased odds of healthier purchasing (OR=1.48 (95% CI 1.12 to 1.96) and OR=1.45 (95% CI 1.09 to 1.91), respectively). There was less evidence of an association between absolute numbers of healthy or unhealthy stores and fruit and vegetable purchasing. We found strong evidence of healthier fruit and vegetable purchasing in households located in areas where the proportion of food stores that were healthy was greater. Policies aimed at improving the balance between healthy and unhealthy stores within areas may therefore be effective in promoting greater consumption of fruit and vegetables.

Differences in healthy food supply and stocking practices between small grocery stores, gas-marts, pharmacies and dollar stores.

PubMed

Caspi, Caitlin Eicher; Pelletier, Jennifer E; Harnack, Lisa; Erickson, Darin J; Laska, Melissa N

2016-02-01

Little is known about the practices for stocking and procuring healthy food in non-traditional food retailers (e.g., gas-marts, pharmacies). The present study aimed to: (i) compare availability of healthy food items across small food store types; and (ii) examine owner/manager perceptions and stocking practices for healthy food across store types. Descriptive analyses were conducted among corner/small grocery stores, gas-marts, pharmacies and dollar stores. Data from store inventories were used to examine availability of twelve healthy food types and an overall healthy food supply score. Interviews with managers assessed stocking practices and profitability. Small stores in Minneapolis and St. Paul, MN, USA, not participating in the Special Supplemental Nutrition Program for Women, Infants, and Children. One hundred and nineteen small food retailers and seventy-one store managers. Availability of specific items varied across store type. Only corner/small grocery stores commonly sold fresh vegetables (63% v. 8% of gas-marts, 0% of dollar stores and 23% of pharmacies). More than half of managers stocking produce relied on cash-and-carry practices to stock fresh fruit (53%) and vegetables (55%), instead of direct store delivery. Most healthy foods were perceived by managers to have at least average profitability. Interventions to improve healthy food offerings in small stores should consider the diverse environments, stocking practices and supply mechanisms of small stores, particularly non-traditional food retailers. Improvements may require technical support, customer engagement and innovative distribution practices.

Differences in healthy food supply and stocking practices between small grocery stores, gas-marts, pharmacies and dollar stores

PubMed Central

Caspi, Caitlin Eicher; Pelletier, Jennifer E.; Harnack, Lisa; Erikson, Darin J.; Laska, Melissa N.

2015-01-01

Objective Little is known about the practices for stocking and procuring healthy food in non-traditional food retailers (e.g., gas-marts, pharmacies). This study aimed to: (i) compare availability of healthy food items across small food store types, and (ii) examine owner/manager perceptions and stocking practices for healthy food across store types. Design Descriptive analyses were conducted among corner/small grocery stores, gas-marts, pharmacies, and dollar stores. Data from store inventories were used to examine availability of 12 healthy food types and an overall healthy food supply score. Interviews with managers assessed stocking practices and profitability. Setting Small stores in Minneapolis and St. Paul, MN not participating in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) Subjects 119 small food retailers and 71 store managers Results Availability of specific items varied across store types. Only corner/small grocery stores commonly sold fresh vegetables (63%, versus 8% of food-gas marts, 0% dollar stores, and 23% pharmacies). More than half of managers stocking produce relied on cash and carry practices to stock fresh fruit (53%) and vegetables (55%), instead of direct store delivery. Most healthy foods were perceived by managers to have at least average profitability. Conclusions Interventions to improve healthy food offerings in small stores should consider the diverse environments, stocking practices and supply mechanisms of small stores, particularly non-traditional food retailers. Improvements may require technical support, customer engagement, and innovative distribution practices. PMID:26411535

Point-of-Sale E-cigarette Advertising Among Tobacco Stores.

PubMed

Wan, Neng; Siahpush, Mohammad; Shaikh, Raees A; McCarthy, Molly; Ramos, Athena; Correa, Antonia

2017-12-01

The marketing expenditure and sale of e-cigarettes increased sharply in the United States in recent years. However, little is known about neighborhood characteristics of point-of-sale (POS) e-cigarette advertising among tobacco stores. The purpose of this study was to examine socio-demographic characteristics of POS e-cigarette advertising among tobacco stores in the Omaha metropolitan area of Nebraska, USA. Between April and June 2014, trained fieldworkers completed marketing audits of all stores that sell tobacco (n = 463) in the Omaha metropolitan area and collected comprehensive e-cigarette advertising data of these stores. Based on the auditing information, we categorized tobacco stores based on e-cigarette advertising status. Logistic regression was used to examine the association between neighborhood socio-demographic factors and e-cigarette advertising among tobacco stores. 251 (54.2%) of the 463 tobacco stores had e-cigarette advertisements. We found that neighborhoods of stores with POS e-cigarette advertising had higher per capita income (p < 0.05), higher percentage of non-hispanic whites (p < 0.005), and higher percentage of individuals with high school education (p < 0.005) than neighborhoods of stores without POS e-cigarette advertising. There were negative associations between e-cigarette advertising and number of adolescents or number of middle/high school students. After adjusting for covariates, only percentage of non-Hispanic Whites remained a significant factor for e-cigarette advertising. POS e-cigarette advertising among tobacco stores is related with neighborhood socioeconomic and demographic characteristics. Future studies are needed to understand how these characteristics are related with e-cigarette purchasing and e-cigarette prevalence among social groups.

Neighborhood socioeconomic characteristics and differences in the availability of healthy food stores and restaurants in Sao Paulo, Brazil.

PubMed

Duran, Ana Clara; Diez Roux, Ana V; Latorre, Maria do Rosario D O; Jaime, Patricia Constante

2013-09-01

Differential access to healthy foods has been hypothesized to contribute to health disparities, but evidence from low and middle-income countries is still scarce. This study examines whether the access of healthy foods varies across store types and neighborhoods of different socioeconomic statuses (SES) in a large Brazilian city. A cross-sectional study was conducted in 2010-2011 across 52 census tracts. Healthy food access was measured by a comprehensive in-store data collection, summarized into two indexes developed for retail food stores (HFSI) and restaurants (HMRI). Descriptive analyses and multilevel models were used to examine associations of store type and neighborhood SES with healthy food access. Fast food restaurants were more likely to be located in low SES neighborhoods whereas supermarkets and full service restaurants were more likely to be found in higher SES neighborhoods. Multilevel analyses showed that both store type and neighborhood SES were independently associated with in-store food measures. We found differences in the availability of healthy food stores and restaurants in Sao Paulo city favoring middle and high SES neighborhoods. © 2013 Elsevier Ltd. All rights reserved.

Pattern recognition with “materials that compute”

PubMed Central

Fang, Yan; Yashin, Victor V.; Levitan, Steven P.; Balazs, Anna C.

2016-01-01

Driven by advances in materials and computer science, researchers are attempting to design systems where the computer and material are one and the same entity. Using theoretical and computational modeling, we design a hybrid material system that can autonomously transduce chemical, mechanical, and electrical energy to perform a computational task in a self-organized manner, without the need for external electrical power sources. Each unit in this system integrates a self-oscillating gel, which undergoes the Belousov-Zhabotinsky (BZ) reaction, with an overlaying piezoelectric (PZ) cantilever. The chemomechanical oscillations of the BZ gels deflect the PZ layer, which consequently generates a voltage across the material. When these BZ-PZ units are connected in series by electrical wires, the oscillations of these units become synchronized across the network, where the mode of synchronization depends on the polarity of the PZ. We show that the network of coupled, synchronizing BZ-PZ oscillators can perform pattern recognition. The “stored” patterns are set of polarities of the individual BZ-PZ units, and the “input” patterns are coded through the initial phase of the oscillations imposed on these units. The results of the modeling show that the input pattern closest to the stored pattern exhibits the fastest convergence time to stable synchronization behavior. In this way, networks of coupled BZ-PZ oscillators achieve pattern recognition. Further, we show that the convergence time to stable synchronization provides a robust measure of the degree of match between the input and stored patterns. Through these studies, we establish experimentally realizable design rules for creating “materials that compute.” PMID:27617290

Open for Business: Learning Economics through Social Interaction in a Student-Operated Store

ERIC Educational Resources Information Center

Broome, John P.; Preston-Grimes, Patrice

2011-01-01

This study examines teaching and learning economics and entrepreneurship through a student-run Montessori middle school store. By designing and managing a school store, students created a "community of practice" to learn economics concepts in their daily environment. Questions guiding this study were: (a) How do students' social-interactions in a…

Availability, quality and price of produce in low-income neighbourhood food stores in California raise equity issues.

PubMed

Gosliner, Wendi; Brown, Daniel M; Sun, Betty C; Woodward-Lopez, Gail; Crawford, Patricia B

2018-06-01

To assess produce availability, quality and price in a large sample of food stores in low-income neighbourhoods in California. Cross-sectional statewide survey. Between 2011 and 2015, local health departments assessed store type, WIC (Supplemental Nutrition Program for Women, Infants, and Children)/SNAP (Supplemental Nutrition Assistance Program) participation, produce availability, quality and price of selected items in stores in low-income neighbourhoods. Secondary data provided reference chain supermarket produce prices matched by county and month. t Tests and ANOVA examined differences by store type; regression models examined factors associated with price. Large grocery stores (n 231), small markets (n 621) and convenience stores (n 622) in 225 neighbourhoods. Produce in most large groceries was rated high quality (97 % of fruits, 98 % of vegetables), but not in convenience stores (25 % fruits, 14 % vegetables). Small markets and convenience stores participating in WIC and/or SNAP had better produce availability, variety and quality than non-participating stores. Produce prices across store types were, on average, higher than reference prices from matched chain supermarkets (27 % higher in large groceries, 37 % higher in small markets, 102 % higher in convenience stores). Price was significantly inversely associated with produce variety, adjusting for quality, store type, and SNAP and WIC participation. The study finds that fresh produce is more expensive in low-income neighbourhoods and that convenience stores offer more expensive, poorer-quality produce than other stores. Variety is associated with price and most limited in convenience stores, suggesting more work is needed to determine how convenience stores can provide low-income consumers with access to affordable, high-quality produce. WIC and SNAP can contribute to the solution.

Kinetic memory based on the enzyme-limited competition.

PubMed

Hatakeyama, Tetsuhiro S; Kaneko, Kunihiko

2014-08-01

Cellular memory, which allows cells to retain information from their environment, is important for a variety of cellular functions, such as adaptation to external stimuli, cell differentiation, and synaptic plasticity. Although posttranslational modifications have received much attention as a source of cellular memory, the mechanisms directing such alterations have not been fully uncovered. It may be possible to embed memory in multiple stable states in dynamical systems governing modifications. However, several experiments on modifications of proteins suggest long-term relaxation depending on experienced external conditions, without explicit switches over multi-stable states. As an alternative to a multistability memory scheme, we propose "kinetic memory" for epigenetic cellular memory, in which memory is stored as a slow-relaxation process far from a stable fixed state. Information from previous environmental exposure is retained as the long-term maintenance of a cellular state, rather than switches over fixed states. To demonstrate this kinetic memory, we study several models in which multimeric proteins undergo catalytic modifications (e.g., phosphorylation and methylation), and find that a slow relaxation process of the modification state, logarithmic in time, appears when the concentration of a catalyst (enzyme) involved in the modification reactions is lower than that of the substrates. Sharp transitions from a normal fast-relaxation phase into this slow-relaxation phase are revealed, and explained by enzyme-limited competition among modification reactions. The slow-relaxation process is confirmed by simulations of several models of catalytic reactions of protein modifications, and it enables the memorization of external stimuli, as its time course depends crucially on the history of the stimuli. This kinetic memory provides novel insight into a broad class of cellular memory and functions. In particular, applications for long-term potentiation are discussed, including dynamic modifications of calcium-calmodulin kinase II and cAMP-response element-binding protein essential for synaptic plasticity.

An evaluation of four measures of adolescents' exposure to cigarette marketing in stores.

PubMed

Feighery, Ellen C; Henriksen, Lisa; Wang, Yun; Schleicher, Nina C; Fortmann, Stephen P

2006-12-01

This study evaluates four measures of exposure to retail cigarette marketing in relation to adolescent smoking behavior. The measures are (a) shopping frequency in types of stores known to carry more cigarette advertising than other store types, (b) shopping frequency in specific stores that sell cigarettes in the study community, (c) the amount of exposure to cigarette brand impressions in stores where students shopped, and (d) perceived exposure to cigarette advertising. The study combined data from classroom surveys administered to 6th-, 7th-, and 8th-grade students in three California middle schools, and direct store observations quantifying cigarette marketing materials and product placement in stores where students shopped. Logistic regression models were used to examine how each exposure measure related to the odds of ever smoking and susceptibility to smoke, controlling for grade, gender, ethnicity, school performance, unsupervised time, and exposure to household and friend smoking. Frequent exposure to retail cigarette marketing as defined by each of the four measures was independently associated with a significant increase in the odds of ever smoking. All but the measure of exposure to store types was associated with a significant increase in the odds of susceptibility to smoke. Four measures of exposure to retail cigarette marketing may serve equally well to predict adolescent smoking but may vary in cost, complexity, and meaning. Depending on the outcomes of interest, the most useful measure may be a combination of self-reported exposure to types of stores that contain cigarette marketing and perceived exposure to such messages.

The prevalence and marketing of electronic cigarettes in proximity to at-risk youths: An investigation of point-of-sale practices near alternative high schools.

PubMed

Miller, Stephen; Pike, James; Chapman, Jared; Xie, Bin; Hilton, Brian N; Ames, Susan L; Stacy, Alan W

2017-01-01

This study examines the point-of-sale marketing practices used to promote electronic cigarettes at stores near schools that serve at-risk youth. One hundred stores selling tobacco products within a half mile of alternative high schools in Southern California were assessed for this study. Seventy percent of stores in the sample sold electronic cigarettes. Convenience stores heavily frequented by youth had the highest number of interior ads for e-cigarettes and were the most likely to employ in-store product placement strategies. Increased exposure to the promotion of these products at the point-of-sale poses a challenge for anti-smoking efforts directed toward vulnerable populations.

The prevalence and marketing of electronic cigarettes in proximity to at-risk youths: An investigation of point-of-sale practices near alternative high schools

PubMed Central

Miller, Stephen; Pike, James; Chapman, Jared; Xie, Bin; Hilton, Brian N.; Ames, Susan L.; Stacy, Alan W.

2017-01-01

This study examines the point-of-sale marketing practices used to promote electronic cigarettes at stores near schools that serve at-risk youth. One hundred stores selling tobacco products within a half mile of alternative high schools in Southern California were assessed for this study. Seventy percent of stores in the sample sold electronic cigarettes. Convenience stores heavily frequented by youth had the highest number of interior ads for e-cigarettes and were the most likely to employ in-store product placement strategies. Increased exposure to the promotion of these products at the point-of-sale poses a challenge for anti-smoking efforts directed toward vulnerable populations. PMID:28993719

Nutrition environments in corner stores in Philadelphia.

PubMed

Cavanaugh, Erica; Mallya, Giridhar; Brensinger, Colleen; Tierney, Ann; Glanz, Karen

2013-02-01

To examine the availability, quality, and price of key types of healthy and less-healthy foods found in corner stores in low-income urban neighborhoods and the associations between store characteristics and store food environments. A sample of 246 corner stores was selected from all corner stores participating in the Philadelphia Healthy Corner Store Initiative (HCSI). The Nutrition Environment Measures Survey for Corner Stores (NEMS-CS) was used to assess the availability, quality, and price of foods and beverages in 11 common categories between February and May, 2011. NEMS-CS measures were completed in 233 stores, 94.7% of the 246 stores approached. The healthier options were significantly less available in all food categories and often more expensive. Baked goods, bread, chips and cereals were sold at nearly all stores, with significantly fewer offering low-fat baked goods (5.7%, p<0.0001), whole grain bread (56.2%, p<0.0001), or baked chips (35.2%, p<0.0001). Number of aisles was positively associated with availability score (p<0.05). Findings from this study point toward potential targets for intervention to improve the corner store food environment and dietary choices among low-income urban populations. Availability of certain healthier foods could be improved. Copyright © 2012 Elsevier Inc. All rights reserved.

The role of remote community stores in reducing the harm resulting from tobacco to Aboriginal people.

PubMed

Ivers, Rowena G; Castro, Anthony; Parfitt, David; Bailie, Ross S; Richmond, Robyn L; D'Abbs, Peter H

2006-05-01

The objective of this study was to assess the potential for reducing the harm resulting from tobacco use through health promotion programmes run in community stores in remote Aboriginal communities. The Tobacco Project utilised data from 111 stakeholder interviews (72 at baseline and 71 at follow-up after 12 months) assessing presence of sales to minors, tobacco advertising, labelling and pricing. It also involved the assessment of observational data from community stores and comments obtained from 29 tobacco vendors derived from community surveys. Sales of tobacco to minors were not reported in community stores and all stores complied with requirements to display the legislated signage. However, tobacco was accessible to minors through a vending machine and through independent vendors. Only one store displayed tobacco advertising; all stores had displayed anti-tobacco health promotion posters or pamphlets. Pricing policies in two stores may have meant that food items effectively subsidised the cost of tobacco. All stores had unofficial no-smoking policies in accessible parts of the store. Remote community stores complied with existing legislation, aside from allowing access of minors to vending machines. There may still be potential for proactive tobacco education campaigns run through community stores and for a trial assessing the effect of changes in tobacco prices on tobacco consumption.

Compression Debarking of Stored Wood Chips

Treesearch

James A. Mattson

1974-01-01

Two 750 ft. piles of unbarked chips were stored for 1 year to evaluate the effect of chip storage on the effectiveness of bark-chip separations-segregation methods under study. in processing stored chips suffered more wood loss than fresh chips.

A wearable pressure sensor based on ultra-violet/ozone microstructured carbon nanotube/polydimethylsiloxane arrays for electronic skins.

PubMed

Yu, Guohui; Hu, Jingdong; Tan, Jianping; Gao, Yang; Lu, Yongfeng; Xuan, Fuzhen

2018-03-16

Pressure sensors with high performance (e.g., a broad pressure sensing range, high sensitivities, rapid response/relaxation speeds, temperature-stable sensing), as well as a cost-effective and highly efficient fabrication method are highly desired for electronic skins. In this research, a high-performance pressure sensor based on microstructured carbon nanotube/polydimethylsiloxane arrays was fabricated using an ultra-violet/ozone (UV/O 3 ) microengineering technique. The UV/O 3 microengineering technique is controllable, cost-effective, and highly efficient since it is conducted at room temperature in an ambient environment. The pressure sensor offers a broad pressure sensing range (7 Pa-50 kPa), a sensitivity of ∼ -0.101 ± 0.005 kPa -1 (<1 kPa), a fast response/relaxation speed of ∼10 ms, a small dependence on temperature variation, and a good cycling stability (>5000 cycles), which is attributed to the UV/O 3 engineered microstructures that amplify and transfer external applied forces and rapidly store/release the energy during the PDMS deformation. The sensors developed show the capability to detect external forces and monitor human health conditions, promising for the potential applications in electronic skin.

KSC-2010-1072

NASA Image and Video Library

2010-01-07

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians verify the alignment of the test equipment that will be used to perform a push test on an external tank door on space shuttle Atlantis. Two umbilical doors, located on the shuttle's aft fuselage, close after external tank separation following launch. The test confirms that the door's actuators are functioning properly and that signals sent from the actuators correctly indicate that the doors have closed, creating the necessary thermal barrier for reentry. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14, 2010. Photo credit: NASA/Troy Cryder

KSC-2010-1076

NASA Image and Video Library

2010-01-07

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians roll the test equipment away from an external tank door on space shuttle Atlantis following the successful completion of a push test. Two umbilical doors, located on the shuttle's aft fuselage, close after external tank separation following launch. The test confirms that the door's actuators are functioning properly and that signals sent from the actuators correctly indicate that the doors have closed, creating the necessary thermal barrier for reentry. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14, 2010. Photo credit: NASA/Troy Cryder

KSC-2010-1074

NASA Image and Video Library

2010-01-07

CAPE CANAVERAL, Fla. - In Orbiter Processing Facility 1 at NASA's Kennedy Space Center in Florida, United Space Alliance technicians remove the test equipment that was used to perform a push test on an external tank door on space shuttle Atlantis. Two umbilical doors, located on the shuttle's aft fuselage, close after external tank separation following launch. The test confirms that the door's actuators are functioning properly and that signals sent from the actuators correctly indicate that the doors have closed, creating the necessary thermal barrier for reentry. Atlantis is next slated to deliver an Integrated Cargo Carrier and Russian-built Mini Research Module to the International Space Station on the STS-132 mission. The second in a series of new pressurized components for Russia, the module will be permanently attached to the Zarya module. Three spacewalks are planned to store spare components outside the station, including six spare batteries, a boom assembly for the Ku-band antenna and spares for the Canadian Dextre robotic arm extension. A radiator, airlock and European robotic arm for the Russian Multi-purpose Laboratory Module also are payloads on the flight. Launch is targeted for May 14, 2010. Photo credit: NASA/Troy Cryder

Solitonic Josephson-based meminductive systems

NASA Astrophysics Data System (ADS)

Guarcello, Claudio; Solinas, Paolo; di Ventra, Massimiliano; Giazotto, Francesco

2017-04-01

Memristors, memcapacitors, and meminductors represent an innovative generation of circuit elements whose properties depend on the state and history of the system. The hysteretic behavior of one of their constituent variables, is their distinctive fingerprint. This feature endows them with the ability to store and process information on the same physical location, a property that is expected to benefit many applications ranging from unconventional computing to adaptive electronics to robotics. Therefore, it is important to find appropriate memory elements that combine a wide range of memory states, long memory retention times, and protection against unavoidable noise. Although several physical systems belong to the general class of memelements, few of them combine these important physical features in a single component. Here, we demonstrate theoretically a superconducting memory based on solitonic long Josephson junctions. Moreover, since solitons are at the core of its operation, this system provides an intrinsic topological protection against external perturbations. We show that the Josephson critical current behaves hysteretically as an external magnetic field is properly swept. Accordingly, long Josephson junctions can be used as multi-state memories, with a controllable number of available states, and in other emerging areas such as memcomputing, i.e., computing directly in/by the memory.

Temperature-Induced Protein Release from Water-in-Oil-in-Water Double Emulsions

PubMed Central

Rojas, Edith C.; Staton, Jennifer A.; John, Vijay T.; Papadopoulos, Kyriakos D.

2009-01-01

A model water-in-oil-in-water (W1/O/W2) double emulsion was prepared by a two-step emulsification procedure and subsequently subjected to temperature changes that caused the oil phase to freeze and thaw while the two aqueous phases remained liquid. Our previous work on individual double-emulsion globules1 demonstrated that crystallizing the oil phase (O) preserves stability, while subsequent thawing triggers coalescence of the droplets of the internal aqueous phase (W1) with the external aqueous phase (W2), termed external coalescence. Activation of this instability mechanism led to instant release of fluorescently tagged bovine serum albumin (fluorescein isothiocyanate (FITC)-BSA) from the W1 droplets and into W2. These results motivated us to apply the proposed temperature-induced globule-breakage mechanism to bulk double emulsions. As expected, no phase separation of the emulsion occurred if stored at temperatures below 18 °C (freezing point of the model oil n-hexadecane), whereas oil thawing readily caused instability. Crucial variables were identified during experimentation, and found to greatly influence the behavior of bulk double emulsions following freeze-thaw cycling. Adjustment of these variables accounted for a more efficient release of the encapsulated protein. PMID:18543998

Control of multidimensional systems on complex network

PubMed Central

Bagnoli, Franco; Battistelli, Giorgio; Chisci, Luigi; Fanelli, Duccio

2017-01-01

Multidimensional systems coupled via complex networks are widespread in nature and thus frequently invoked for a large plethora of interesting applications. From ecology to physics, individual entities in mutual interactions are grouped in families, homogeneous in kind. These latter interact selectively, through a sequence of self-consistently regulated steps, whose deeply rooted architecture is stored in the assigned matrix of connections. The asymptotic equilibrium eventually attained by the system, and its associated stability, can be assessed by employing standard nonlinear dynamics tools. For many practical applications, it is however important to externally drive the system towards a desired equilibrium, which is resilient, hence stable, to external perturbations. To this end we here consider a system made up of N interacting populations which evolve according to general rate equations, bearing attributes of universality. One species is added to the pool of interacting families and used as a dynamical controller to induce novel stable equilibria. Use can be made of the root locus method to shape the needed control, in terms of intrinsic reactivity and adopted protocol of injection. The proposed method is tested on both synthetic and real data, thus enabling to demonstrate its robustness and versatility. PMID:28892493

A wearable pressure sensor based on ultra-violet/ozone microstructured carbon nanotube/polydimethylsiloxane arrays for electronic skins

NASA Astrophysics Data System (ADS)

Yu, Guohui; Hu, Jingdong; Tan, Jianping; Gao, Yang; Lu, Yongfeng; Xuan, Fuzhen

2018-03-01

Pressure sensors with high performance (e.g., a broad pressure sensing range, high sensitivities, rapid response/relaxation speeds, temperature-stable sensing), as well as a cost-effective and highly efficient fabrication method are highly desired for electronic skins. In this research, a high-performance pressure sensor based on microstructured carbon nanotube/polydimethylsiloxane arrays was fabricated using an ultra-violet/ozone (UV/O3) microengineering technique. The UV/O3 microengineering technique is controllable, cost-effective, and highly efficient since it is conducted at room temperature in an ambient environment. The pressure sensor offers a broad pressure sensing range (7 Pa-50 kPa), a sensitivity of ˜ -0.101 ± 0.005 kPa-1 (<1 kPa), a fast response/relaxation speed of ˜10 ms, a small dependence on temperature variation, and a good cycling stability (>5000 cycles), which is attributed to the UV/O3 engineered microstructures that amplify and transfer external applied forces and rapidly store/release the energy during the PDMS deformation. The sensors developed show the capability to detect external forces and monitor human health conditions, promising for the potential applications in electronic skin.

Designing pharmacy services based on grocery store patron preferences.

PubMed

Lindstrom, Nicolette S Raya; Casper, Kristin A; Green, Tara R; Pedersen, Craig A

2007-01-01

To assess preferences of grocery store patrons concerning pharmacy services and identify study participant characteristics that may predict the success of pharmacy services in the community setting. Self-administered survey. Central Ohio from December 16, 2005, to January 12, 2006. 163 grocery store patrons. Eight grocery store survey events. Responses to survey items about (1) perceived importance of 28 pharmacy services, (2) identification of the 3 most important services, (3) frequency of grocery store and pharmacy use, (4) preferred methods of advertising pharmacy services, and (5) socioeconomic demographics. Preferred services delineated by various demographics also were analyzed. A total of 163 surveys were returned from study participants. Nine services appeared in both the top 12 overall preferred services and the 12 highest-ranked services. Statistically significant differences were observed among services ranked as important or very important by age, race, employment, income, caregiver status, and prescription drug coverage status. The three advertising tools selected most frequently included: weekly grocery store ads (68.6%), in-store signs (51.0%), and flyers attached to prescription bags (36.0%). Grocery store patrons would like a wide range of nontraditional pharmacy services that could be implemented into community pharmacies. Pharmacies in grocery stores need to provide both traditional and expanded pharmacy services to meet the desires and expectations of current and potential patients, and expanded marketing methods should be considered.

RFID in the Apparel Retail Industry: A Case Study from Galeria Kaufhof

NASA Astrophysics Data System (ADS)

Al-Kassab, Jasser; Blome, Philipp; Wolfram, Gerd; Thiesse, Frédéric; Fleisch, Elgar

This contribution deals with the business valueof radio frequency identification (RFID) technology in the apparel retail industry. We present a case study of an RFID project at Galeria Kaufhof, a subsidiary of Metro Group and one of the largest department store chains in Europe. The trial shows that operational efficiency gains through the automation of logistical in-store processes, such as inventory counting or goods receipt, are possible. Moreover, RFID enables new customer applications on the sales floor, which allow for a redesign of the customer interface, and thus an improvement of the service processes and the service quality. In addition, the analyses of the gathered data on the sales floor help to close the "data void" between the goods receipt and the point of sales of the department store, thus offering the opportunity to directly observe and analyze physical in-store processes. The RFID data analyses allow for deriving valuable information for the department store management in the areas of inventory management, category management, store layout management, and department store processes.

KSC-2009-5825

NASA Image and Video Library

2009-10-24

CAPE CANAVERAL, Fla. – External tank 134 is towed toward the open door of the transfer aisle of the Vehicle Assembly Building, or VAB, at NASA's Kennedy Space Center in Florida. The Pegasus barge, carrying the fuel tank, arrived in Florida after an ocean voyage towed by a solid rocket booster retrieval ship from NASA's Michoud Assembly Facility near New Orleans. Next, the tank will be transported into the VAB where it will be stored until needed. ET-134 will be used to launch space shuttle Endeavour on the STS-130 mission to the International Space Station. Launch is targeted for Feb. 4, 2010. For information on the components of the space shuttle and the STS-130 mission, visit http://www.nasa.gov/shuttle. Photo credit: NASA/Jack Pfaller

KSC-2009-5821

NASA Image and Video Library

2009-10-24

CAPE CANAVERAL, Fla. – A worker tows external tank 134 off the Pegasus barge docked in the turn basin near the Vehicle Assembly Building, or VAB, at NASA's Kennedy Space Center in Florida. Pegasus arrived in Florida after an ocean voyage towed by a solid rocket booster retrieval ship from NASA's Michoud Assembly Facility near New Orleans. After the fuel tank is offloaded, it will be transported into the VAB where it will be stored until needed. ET-134 will be used to launch space shuttle Endeavour on the STS-130 mission to the International Space Station. Launch is targeted for Feb. 4, 2010. For information on the components of the space shuttle and the STS-130 mission, visit http://www.nasa.gov/shuttle. Photo credit: NASA/Jack Pfaller

KSC-2009-5824

NASA Image and Video Library

2009-10-24

CAPE CANAVERAL, Fla. – External tank 134 is towed toward the looming 525-foot-tall Vehicle Assembly Building, or VAB, at NASA's Kennedy Space Center in Florida. The Pegasus barge, carrying the fuel tank, arrived in Florida after an ocean voyage towed by a solid rocket booster retrieval ship from NASA's Michoud Assembly Facility near New Orleans. Next, the tank will be transported into the VAB where it will be stored until needed. ET-134 will be used to launch space shuttle Endeavour on the STS-130 mission to the International Space Station. Launch is targeted for Feb. 4, 2010. For information on the components of the space shuttle and the STS-130 mission, visit http://www.nasa.gov/shuttle. Photo credit: NASA/Jack Pfaller

Development of an Integrated Data Acquisition System for a Small Flight Probe

NASA Technical Reports Server (NTRS)

Swanson, Gregory T.; Empey, Daniel M.; Skokova, Kristina A.; Venkatapathy, Ethiraj

2012-01-01

In support of the SPRITE concept, an integrated data acquisition system has been developed and fabricated for preliminary testing. The data acquisition system has been designed to condition traditional thermal protection system sensors, store their data to an on-board memory card, and in parallel, telemeter to an external system. In the fall of 2010, this system was integrated into a 14 in. diameter, 45 degree sphere cone probe instrumented with thermal protection system sensors. This system was then tested at the NASA Ames Research Center Aerodynamic Heating Facility's arc jet at approximately 170 W/sq. cm. The first test in December 2010 highlighted hardware design issues that were redesigned and implemented leading to a successful test in February 2011.

IDC Re-Engineering Phase 2 Iteration E2 Use Case Realizations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, James M.; Burns, John F.; Hamlet, Benjamin R.

2016-06-01

This architecturally significant use case describes how the System acquires meteorological data to build atmospheric models used in automatic and interactive processing of infrasound data. The System requests the latest available high-resolution global meteorological data from external data centers and puts it into the correct formats for generation of infrasound propagation models. The system moves the meteorological data from Data Acquisition Partition to the Data Processing Partition and stores the meteorological data. The System builds a new atmospheric model based on the meteorological data. This use case is architecturally significant because it describes acquiring meteorological data from various sources andmore » creating dynamic atmospheric transmission model to support the prediction of infrasonic signal detection« less

Development of Prediction Techniques for Aerodynamic Loads Acting on External Stores

DTIC Science & Technology

1975-11-01

Unclassified Se’cunty Classaficataon DOCUMENT CONTROL DATA- R &D Streurtet, ci., ,flcf.,t, oh’ till, t ol of , hst, , I .i- 4ttt*ic., ,n la t t I hi tr...4 N 𔃺 0 I 0. o 0 00 0 0 4J 0 0 0 0 .o- o .8. 0 0 .-8 o Sn 140SnS 0 o 0 0 00 La , 0 0 .8 0 4 L 0 l Ř - 0 Sn n Sn2 9kn I Sn Sn 0Sn 𔃺 2 Sn.m...weighted regression analysis E- udy of configurations in this category. 4.5 Stngle Weapon Plus Rack As was explained in Section 4.2 for arrangements

The Challenges of Developing a Food System for a Mars Mission

NASA Technical Reports Server (NTRS)

Perchonok, Michele

2007-01-01

A viewgraph describing the food system that NASA is developing for Manned Mars Missions is shown. The topics include: 1) The President's Vision for U.S. Space Exploration -January 14, 2004; 2) Introducing Orion (and Ares); 3) Mercury (1961-1963); 4) Gemini (1965-1966); 5) Apollo (1968-1972); 6) Skylab (1973-1974); 7) Shuttle/Mir (1995-1998); 8) Shuttle (1981-present) International Space Station (2000-present); 9) NASA Stored Food System; 10) Advanced Food Technology; 11) Orion Missions; 12) Orion Challenges; 13) Food Packaging; 14) Mars Mission Assumptions; 15) Planetary Food System Selected Crops; 16) Food Processing Equipment Constraints; 17) Crew Involvement Constraints; 18) Advanced Food Technology Integration; 19) Research Highlights Internal; and 20) Research Highlights External.

Unified random access memory (URAM) by integration of a nanocrystal floating gate for nonvolatile memory and a partially depleted floating body for capacitorless 1T-DRAM

NASA Astrophysics Data System (ADS)

Ryu, Seong-Wan; Han, Jin-Woo; Kim, Chung-Jin; Kim, Sungho; Choi, Yang-Kyu

2009-03-01

This paper describes a unified memory (URAM) that utilizes a nanocrystal SOI MOSFET for multi-functional applications of both nonvolatile memory (NVM) and capacitorless 1T-DRAM. By using a discrete storage node (Ag nanocrystal) as the floating gate of the NVM, high defect immunity and 2-bit/cell operation were achieved. The embedded nanocrystal NVM also showed 1T-DRAM operation (program/erase time = 100 ns) characteristics, which were realized by storing holes in the floating body of the SOI MOSFET, without requiring an external capacitor. Three-bit/cell operation was accomplished for different applications - 2-bits for nonvolatility and 1-bit for fast operation.

Texas nutrition environment assessment of retail food stores (TxNEA-S): development and evaluation.

PubMed

Gloria, Christian T; Steinhardt, Mary A

2010-11-01

Current nutrition environment instruments are typically designed to measure a small number of healthy foods based on national trends. They lack the depth to accurately measure the unique dietary choices of subpopulations, such as Texas consumers whose food preferences are influenced by Hispanic/Latino culture. Thus the purposes of the present study were to: (i) develop a comprehensive observational tool to measure the availability of healthy foods from retail stores in Texas; and (ii) conduct a pilot test to examine the tool's reliability, as well as differences in the availability of healthy foods in stores between high- and low-income neighbourhoods. Grocery and convenience stores were assessed for availability of healthy foods. Reliability was calculated using percentage agreement, and differences in availability were examined using 2 (store type) × 2 (neighbourhood income) ANOVA. One high-income and one low-income neighbourhood in Austin, Texas. A sample of thirty-eight stores comprising twenty-five convenience stores and thirteen grocery stores. The low-income neighbourhood had 324 % more convenience stores and 56 % fewer grocery stores than the high-income neighbourhood. High inter-rater (mean = 0·95) and test-retest reliability (mean = 0·92) and a significant interaction (P = 0·028) between store type and neighbourhood income were found. The TxNEA-S tool includes 106 healthy food items, such as fruits, vegetables, dairy, proteins and grains. The tool is reliable and face validity is affirmed by the Texas Department of Health. Grocery stores have more healthy foods than convenience stores, and high-income grocery stores offer more healthy foods than low-income grocery stores.

Utilizing Simulation-Based Training of Video Clip Instruction for the Store Service Operations Practice Course

ERIC Educational Resources Information Center

Lin, Che-Hung; Yen, Yu-Ren; Wu, Pai-Lu

2015-01-01

The aim of this study was to develop a store service operations practice course based on simulation-based training of video clip instruction. The action research of problem-solving strategies employed for teaching are by simulated store operations. The counter operations course unit used as an example, this study developed 4 weeks of subunits for…

Urban farmers' markets: accessibility, offerings, and produce variety, quality, and price compared to nearby stores.

PubMed

Lucan, Sean C; Maroko, Andrew R; Sanon, Omar; Frias, Rafael; Schechter, Clyde B

2015-07-01

Most food-environment research has focused narrowly on select stores and restaurants. There has been comparatively less attention to non-storefront food sources like farmers' markets (FMs), particularly in urban communities. The objective of the present study was to assess FMs' potential contribution to an urban food environment in terms of specific foods offered, and compare FM accessibility as well as produce variety, quality, and price to that of nearby stores. Investigators conducted a detailed cross-sectional assessment of all FMs in Bronx County, NY, and of the nearest store(s) selling produce within a half-mile walking distance (up to two stores per FM). The study included 26 FMs and 44 stores. Investigators assessed accessibility (locations of FMs and stores relative to each other, and hours of operation for each), variety (the number and type of all food items offered at FMs and all fresh produce items offered at stores), quality (where produce items were grown and if they were organic), and price (including any sales prices or promotional discounts). Analyses included frequencies, proportions, and variable distributions, as well as mixed-effect regressions, paired t-tests, and signed rank tests to compare FMs to stores. Geographic information systems (GIS) allowed for mapping of FM and store locations and determining street-network distances between them. The mean distance between FMs and the nearest store selling fresh produce was 0.15 miles (range 0.02-0.36 miles). FMs were open substantially fewer months, days, and hours than stores. FMs offered 26.4 fewer fresh produce items on average than stores (p values <0.02). FM produce items were more frequently local and organic, but often tended toward less-common/more-exotic and heirloom varieties. FMs were more expensive on average (p values <0.001 for pairwise comparisons to stores) - even for more-commonplace and "conventional" produce - especially when discounts or sales prices were considered. Fully, 32.8% of what FMs offered was not fresh produce at all but refined or processed products (e.g., jams, pies, cakes, cookies, donuts, juice drinks). FMs may offer many items not optimal for good nutrition and health, and carry less-varied, less-common fresh produce in neighborhoods that already have access to stores with cheaper prices and overwhelmingly more hours of operation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Urban Farmers' Markets: accessibility, offerings, and produce variety, quality, and price compared to nearby stores

PubMed Central

Maroko, Andrew; Sanon, Omar; Frias, Rafael; Schechter, Clyde B.

2015-01-01

Most food-environment research has focused narrowly on select stores and restaurants. There has been comparatively less attention to non-storefront food sources like farmers' markets (FMs), particularly in urban communities. The objective of the present study was to assess FMs' potential contribution to an urban food environment in terms of specific foods offered, and compare FM accessibility as well as produce variety, quality, and price to that of nearby stores. Investigators conducted a detailed cross-sectional assessment of all FMs in Bronx County, NY, and of the nearest store(s) selling produce within a half-mile walking distance (up to two stores per FM). The study included 26 FMs and 44 stores. Investigators assessed accessibility (locations of FMs and stores relative to each other, and hours of operation for each), variety (the number and type of all food items offered at FMs and all fresh produce items offered at stores), quality (where produce items were grown and if they were organic), and price (including any sales prices or promotional discounts). Analyses included frequencies, proportions, and variable distributions, as well as mixed-effect regressions, paired t-tests, and signed rank tests to compare FMs to stores. Geographic information systems (GIS) allowed for mapping of FM and store locations and determining street-network distances between them. The mean distance between FMs and the nearest store selling fresh produce was 0.15 miles (range 0.02-0.36 miles). FMs were open substantially fewer months, days, and hours than stores. FMs offered 26.4 fewer fresh produce items on average than stores (p values <0.02). FM produce items were more frequently local and organic, but often tended towards less-common/more-exotic and heirloom varieties. FMs were more expensive on average (p values <0.001 for pairwise comparisons to stores)—even for more-commonplace and “conventional” produce—especially when discounts or sales prices were considered. Fully, 32.8% of what FMs offered was not fresh produce at all but refined or processed products (e.g., jams, pies, cakes, cookies, donuts, juice drinks). FMs may offer many items not optimal for good nutrition and health, and carry less-varied, less-common fresh produce in neighborhoods that already have access to stores with cheaper prices and overwhelmingly more hours of operation. PMID:25733377

Availability of commonly consumed and culturally specific fruits and vegetables in African-american and Latino neighborhoods.

PubMed

Grigsby-Toussaint, Diana S; Zenk, Shannon N; Odoms-Young, Angela; Ruggiero, Laurie; Moise, Imelda

2010-05-01

Although the importance of culture in shaping individual dietary behaviors is well-documented, cultural food preferences have received limited attention in research on the neighborhood food environment. The purpose of this study was to assess the availability of commonly consumed and culturally specific fruits and vegetables in retail food stores located in majority African-American and Latino neighborhoods in southwest Chicago, IL. A cross-sectional survey of 115 stores (15% grocery stores, 85% convenience/corner stores) in African-American neighborhoods and 110 stores (45% grocery stores, 55% convenience/corner stores) in Latino neighborhoods was conducted between May and August of 2006. chi(2) tests were used to assess differences in the availability (presence/absence) of commonly consumed (n=25) and culturally specific fruits and vegetables for African Americans (n=16 varieties) and Latinos (n=18 varieties). Stores located in neighborhoods in which the majority of residents were African American or Latino were more likely to carry fresh fruits and vegetables that were culturally relevant to the dominant group. For example, grocery stores located in Latino neighborhoods were more likely to carry chayote (82.0% vs 17.6%, P<0.05), whereas grocery stores located in African-American neighborhoods were more likely to carry black-eyed peas (52.9% vs 20%, P<0.05). Most stores, however, carried fewer than 50% of commonly consumed or culturally specific fruits and vegetables. Findings from this study highlight that limited availability of culturally specific as well as commonly consumed fruits and vegetables in the neighborhood may be a barrier to fruit and vegetable consumption among African Americans and Latinos. Copyright 2010 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

Availability of commonly consumed and culturally specific fruits and vegetables in African-American and Latino neighborhoods

PubMed Central

Grigsby-Toussaint, Diana S.; Zenk, Shannon N.; Odoms-Young, Angela; Ruggiero, Laurie; Moise, Imelda

2010-01-01

Although the importance of culture in shaping individual dietary behaviors is well documented, cultural food preferences have received limited attention in research on the neighborhood food environment. The purpose of this study was to assess the availability of commonly consumed and culturally specific fruits and vegetables in retail food stores located in majority African-American and Latino neighborhoods in southwest Chicago. A cross-sectional survey of 115 stores (15% grocery stores, 85% convenience/corner stores) in African-American neighborhoods and 110 stores (45% grocery stores, 55% convenience/corner stores) in Latino neighborhoods was conducted between May and August 2006. Chi-square tests were used to test for differences in the availability (presence/absence) of commonly consumed (n=25) and culturally specific fruits and vegetables for African-Americans (n=16 varieties) and Latinos (n=18 varieties). Stores located in neighborhoods in which the majority of residents were African-American or Latino residents were more likely to carry fresh fruits and vegetables that were culturally relevant to the dominant group. For example, grocery stores located in Latino neighborhoods were more likely to carry chayote (82.0% vs. 17.6%, p <0.05), while grocery stores located in African-American neighborhoods were more likely to carry black-eyed peas (52.9% vs. 20%, p<0.05). Most stores, however, carried less than 50% of commonly consumed or culturally specific fruits and vegetables. Findings from this study highlight that limited availability of culturally specific as well as commonly consumed fruits and vegetables in the neighborhood may serve as a barrier to fruit and vegetable consumption among African-Americans and Latinos. PMID:20430136

Basal activity of voltage-gated Ca(2+) channels controls the IP3-mediated contraction by α(1)-adrenoceptor stimulation of mouse aorta segments.

PubMed

Leloup, Arthur J; Van Hove, Cor E; De Meyer, Guido R Y; Schrijvers, Dorien M; Fransen, Paul

2015-08-05

α1-Adrenoceptor stimulation of mouse aorta causes intracellular Ca(2+) release from sarcoplasmic reticulum Ca(2+) stores via stimulation of inositoltriphosphate (IP3) receptors. It is hypothesized that this Ca(2+) release from the contractile and IP3-sensitive Ca(2+) store is under the continuous dynamic control of time-independent basal Ca(2+) influx via L-type voltage-gated Ca(2+) channels (LCC) residing in their window voltage range. Mouse aortic segments were α1-adrenoceptor stimulated with phenylephrine in the absence of external Ca(2+) (0Ca) to measure phasic isometric contractions. They gradually decreased with time in 0Ca, were inhibited with 2-aminoethoxydiphenyl borate, and declined with previous membrane potential hyperpolarization (levcromakalim) or with previous inhibition of LCC (diltiazem). Former basal stimulation of LCC with depolarization (15 mM K(+)) or with BAY K8644 increased the subsequent phasic contractions by phenylephrine in 0Ca. Although exogenous NO (diethylamine NONOate) reduced the phasic contractions by phenylephrine, stimulation of endothelial cells with acetylcholine in 0Ca failed to attenuate these phasic contractions. Finally, inhibition of the basal release of NO with N(Ω)-nitro-L-arginine methyl ester also attenuated the phasic contractions by phenylephrine. Results indicated that α1-adrenoceptor stimulation with phenylephrine causes phasic contractions, which are controlled by basal LCC and endothelial NO synthase activity. Endothelial NO release by acetylcholine was absent in 0Ca. Given the growing interest in the active regulation of arterial compliance, the dependence of contractile SR Ca(2+) store-refilling in basal conditions on the activity of LCC and basal eNOS may contribute to a more thorough understanding of physiological mechanisms leading to arterial stiffness. Copyright © 2015. Published by Elsevier B.V.

A chemometrics approach applied to Fourier transform infrared spectroscopy (FTIR) for monitoring the spoilage of fresh salmon (Salmo salar) stored under modified atmospheres.

PubMed

Saraiva, C; Vasconcelos, H; de Almeida, José M M M

2017-01-16

The aim of this work was to investigate the potential of Fourier transform infrared spectroscopy (FTIR) to detect and predict the bacterial load of salmon fillets (Salmo salar) stored at 3, 8 and 30°C under three packaging conditions: air packaging (AP) and two modified atmospheres constituted by a mixture of 50%N 2 /40%CO 2 /10%O 2 with lemon juice (MAPL) and without lemon juice (MAP). Fresh salmon samples were periodically examined for total viable counts (TVC), specific spoilage organisms (SSO) counts, pH, FTIR and sensory assessment of freshness. Principal components analysis (PCA) allowed identification of the wavenumbers potentially correlated with the spoilage process. Linear discriminant analysis (LDA) of infrared spectral data was performed to support sensory data and to accurately identify samples freshness. The effect of the packaging atmospheres was assessed by microbial enumeration and LDA was used to determine sample packaging from the measured infrared spectra. It was verified that modified atmospheres can decrease significantly the bacterial load of fresh salmon. Lemon juice combined with MAP showed a more pronounced delay in the growth of Brochothrix thermosphacta, Photobacterium phosphoreum, psychrotrophs and H 2 S producers. Partial least squares regression (PLS-R) allowed estimates of TVC and psychrotrophs, lactic acid bacteria, molds and yeasts, Brochothrix thermosphacta, Enterobacteriaceae, Pseudomonas spp. and H 2 S producer counts from the infrared spectral data. For TVC, the root mean square error of prediction (RMSEP) value was 0.78logcfug -1 for an external set of samples. According to the results, FTIR can be used as a reliable, accurate and fast method for real time freshness evaluation of salmon fillets stored under different temperatures and packaging atmospheres. Copyright © 2016 Elsevier B.V. All rights reserved.

Consumers' quality perception of national branded, national store branded, and imported store branded beef.

PubMed

Banović, Marija; Grunert, Klaus G; Barreira, Maria Madalena; Fontes, Magda Aguiar

2010-01-01

This study investigated the differences in the consumers' quality perception of national branded, national store branded, and imported store branded beef. Partial Least Squares analysis is used for modelling the quality perception process. Results show that consumers perceived national branded Carnalentejana beef, as better on all quality cues and quality aspects than the other two store branded beefs. Preference for Carnalentejana beef stayed highly consistent even after the blind test, where consumers differentiated this beef from the other two beef brands on all sensory dimensions: taste, tenderness, and juiciness, and chose it as the preferred one. Consumers utilized more perceived intrinsic cues to infer expected eating quality of store branded beefs.

Community measures of low-fat milk consumption: comparing store shelves with households.

PubMed

Fisher, B D; Strogatz, D S

1999-02-01

This study examined the relationship between the proportion of milk in food stores that is low-fat and consumption of low-fat milk in the community. Data were gathered from 503 stores across 53 New York State zip codes. In 19 zip codes, a telephone survey measured household low-fat milk use. Census data were obtained to examine sociodemographic predictors of the percentage of low-fat milk in stores. The proportion of low-fat milk in stores was directly related to low-fat milk consumption in households and to the median income and urban level of the zip code. These results support using food store shelf-space observations to estimate low-fat milk consumption.

Characterizing the Bacterial Communities in Retail Stores in the United States

DTIC Science & Technology

2015-01-01

community or the factors that affect it. To our knowledge, only one study to date has investigated the indoor bacterial microbiome of retail stores...type of store affects the microbial community present, the impact of store type on the bacterial community was investigated by comparing the bacteria...genes analysis (Figure 2). Additionally, Leff and Fierer (2013) observed a high relative abundance of Enterobacteriaceae on fruits and vegetables but

You are where you shop: grocery store locations, weight, and neighborhoods.

PubMed

Inagami, Sanae; Cohen, Deborah A; Finch, Brian Karl; Asch, Steven M

2006-07-01

Residents in poor neighborhoods have higher body mass index (BMI) and eat less healthfully. One possible reason might be the quality of available foods in their area. Location of grocery stores where individuals shop and its association with BMI were examined. The 2000 U.S. Census data were linked with the Los Angeles Family and Neighborhood Study (L.A.FANS) database, which consists of 2620 adults sampled from 65 neighborhoods in Los Angeles County between 2000 and 2002. In 2005, multilevel linear regressions were used to estimate the associations between BMI and socioeconomic characteristics of grocery store locations after adjustment for individual-level factors and socioeconomic characteristics of residential neighborhoods. Individuals have higher BMI if they reside in disadvantaged areas and in areas where the average person frequents grocery stores located in more disadvantaged neighborhoods. Those who own cars and travel farther to their grocery stores also have higher BMI. When controlling for grocery store census tract socioeconomic status (SES), the association between residential census tract SES and BMI becomes stronger. Where people shop for groceries and distance traveled to grocery stores are independently associated with BMI. Exposure to grocery store mediates and suppresses the association of residential neighborhoods with BMI and could explain why previous studies may not have found robust associations between residential neighborhood predictors and BMI.

Shopping for fruits and vegetables. Food and retail qualities of importance to low-income households at the grocery store.

PubMed

Webber, Caroline B; Sobal, Jeffery; Dollahite, Jamie S

2010-04-01

Purchasing fruits and vegetables is an integral part of managing food consumption and dietary quality. This study examined how low-income adults who had primary responsibility for household food purchases considered retail produce decisions. We used a qualitative research approach based on grounded theory and an ecological conceptual framework. Twenty-eight low-income rural, village, and inner city heads of households in upstate New York, USA, were selected by purposive and theoretical sampling and interviewed about fruit and vegetable shopping habits, attitudes toward local food stores, and where and how they would prefer to buy produce. Analyses revealed their concerns were organized around five themes: store venue; internal store environment; product quality; product price; relationships with the stores. An unanticipated finding was the differing social relations that appear to exist between participant consumers, store employees and management, and the store itself as a representation of the larger retail food system. Attitudes toward retail food stores in this study are described as passive or fatalistic indifference, supportive, opportunistic, and confrontational (change agents). These attitudes are related to how shoppers considered retail fruit and vegetable choice, access, and availability. These findings suggest ways to individualize nutrition education and consumer education messages. Copyright 2009 Elsevier Ltd. All rights reserved.

Food and Beverage Availability in Small Food Stores Located in Healthy Food Financing Initiative Eligible Communities.

PubMed

Singleton, Chelsea R; Li, Yu; Duran, Ana Clara; Zenk, Shannon N; Odoms-Young, Angela; Powell, Lisa M

2017-10-18

Food deserts are a major public health concern. This study aimed to assess food and beverage availability in four underserved communities eligible to receive funding from the Healthy Food Financing Initiative (HFFI). Data analyzed are part of a quasi-experimental study evaluating the impact of the HFFI on the retail food environment in selected Illinois communities. In 2015, 127 small grocery and limited service stores located in the four selected communities were audited. All communities had a large percentage of low-income and African-American residents. Differences in food and beverage item availability (e.g., produce, milk, bread, snack foods) were examined by store type and community location. Food stores had, on average, 1.8 fresh fruit and 2.9 fresh vegetable options. About 12% of stores sold low-fat milk while 86% sold whole milk. Only 12% of stores offered 100% whole wheat bread compared to 84% of stores offering white bread. Almost all (97%) stores offered soda and/or fruit juice. In summary, we found limited availability of healthier food and beverage items in the communities identified for HFFI support. Follow up findings will address how the introduction of new HFFI-supported supermarkets will affect food and beverage availability in these communities over time.

Process evaluation of a food marketing and environmental change intervention in Tiendas that serve Latino immigrants in North Carolina.

PubMed

Baquero, Barbara; Linnan, Laura; Laraia, Barbara A; Ayala, Guadalupe X

2014-11-01

This article describes a comprehensive process evaluation of an efficacious store-based intervention that increased store customers' fruit and vegetable consumption. The process evaluation plan was designed at study inception and implemented at baseline, during the intervention, and at immediate postintervention. Four Latino food stores were randomly assigned either to an intervention or to a control condition. Data were collected from store managers, employees, and 139 Latino customers. Researchers used manager, employee, and customer interviews; weekly observations of the store environment; and implementation logs to assess reach, dose delivered, dose received, and fidelity. Results indicated that it is possible to reach customers in a store-based intervention. Indicators of dose delivered demonstrated that the intervention was implemented as planned, and in the case of employee training, it exceeded the plan. Dose received data indicated that customers moderately engaged with the intervention activities. Together these suggest that the intervention was delivered with good fidelity. Comprehensive process evaluation efforts can facilitate the identification and elimination of barriers to implementation. This approach can serve as a model for future store-based interventions. The study demonstrated that it is feasible to implement Latino food store-based interventions to increase access to and consumption of fruits and vegetables. © 2014 Society for Public Health Education.

Food and Beverage Availability in Small Food Stores Located in Healthy Food Financing Initiative Eligible Communities

PubMed Central

Li, Yu; Duran, Ana Clara; Zenk, Shannon N.; Odoms-Young, Angela; Powell, Lisa M.

2017-01-01

Food deserts are a major public health concern. This study aimed to assess food and beverage availability in four underserved communities eligible to receive funding from the Healthy Food Financing Initiative (HFFI). Data analyzed are part of a quasi-experimental study evaluating the impact of the HFFI on the retail food environment in selected Illinois communities. In 2015, 127 small grocery and limited service stores located in the four selected communities were audited. All communities had a large percentage of low-income and African-American residents. Differences in food and beverage item availability (e.g., produce, milk, bread, snack foods) were examined by store type and community location. Food stores had, on average, 1.8 fresh fruit and 2.9 fresh vegetable options. About 12% of stores sold low-fat milk while 86% sold whole milk. Only 12% of stores offered 100% whole wheat bread compared to 84% of stores offering white bread. Almost all (97%) stores offered soda and/or fruit juice. In summary, we found limited availability of healthier food and beverage items in the communities identified for HFFI support. Follow up findings will address how the introduction of new HFFI-supported supermarkets will affect food and beverage availability in these communities over time. PMID:29057794

A national study of the association between food environments and county-level health outcomes.

PubMed

Ahern, Melissa; Brown, Cheryl; Dukas, Stephen

2011-01-01

This national, county-level study examines the relationship between food availability and access, and health outcomes (mortality, diabetes, and obesity rates) in both metro and non-metro areas. This is a secondary, cross-sectional analysis using Food Environment Atlas and CDC data. Linear regression models estimate relationships between food availability and access variables (direct-to-consumer farm sales, per capita grocery stores, full-service restaurants, fast food restaurants, and convenience stores) with health outcomes. Controls include smoking, race/ethnicity, gender, age, education, poverty, primary care availability, recreational facility availability, and mobility/distance-from-grocery-store. Non-metro findings: Lower adjusted mortality rates were associated with more per capita full-service restaurants and grocery stores, and greater per capita direct farm sales. Lower adjusted diabetes rates were associated with a lower per capita supply of fast food restaurants and convenience stores, and more per capita full-service restaurants and grocery stores. Lower adjusted obesity rates were associated with more per capita full-service restaurants and grocery stores. Unexpectedly, obesity rates were positively associated with per capita grocery stores and negatively associated with fast food restaurants. Metro findings: More per capita full-service restaurants, grocery stores, and direct farm sales are associated with positive health outcomes; fast food restaurants and convenience stores are associated with negative health outcomes. The food access/availability environment is an important determinant of health outcomes in metro and non-metro areas. Future research should focus on more refined specifications that capture variability across non-metro settings. © 2011 National Rural Health Association.

Effects of communities, neighborhoods and stores on retail pricing and promotion of beer.

PubMed

Harwood, Eileen M; Erickson, Darin J; Fabian, Lindsey E A; Jones-Webb, Rhonda; Slater, Sandy; Chaloupka, Frank J

2003-09-01

This study examines how communities, neighborhoods and stores influence retail pricing and promotion of beer. In the year 2000, trained field staff conducted observations in 2,024 retail alcohol stores in 160 communities throughout the contiguous United States. Based on a nationally representative sample of schools, we selected communities defined by the school's catchment area, or the vicinity from which the majority of students are drawn. We randomly selected off-sale alcohol retail establishments from a complete list of stores likely to sell tobacco or alcohol in the selected communities. Beer price and promotions are based on observations of Miller and Budweiser beer brands in the stores. Neighborhoods are defined by the store's census block. We used cross-sectional, hierarchical regression models and mixed methods procedures to analyze data. Community, neighborhood and store characteristics were related to beer price; however, only community and store characteristics were predictive of beer promotions. Overall, the pricing and promotion of beer vary systematically by some characteristics of communities, neighborhoods and stores, but not significantly by the number of young people populating a neighborhood. In addition, pricing and promotion of Budweiser and Miller beers, in particular, do not appear to target racial minority populations. Because of the significant effect of store characteristics, public health agencies and advocates might focus prevention efforts on collaborations with liquor control agencies to reduce variations in pricing and promotion of beer, which ultimately encourage risky drinking behaviors. Further studies are needed to examine the effects of pricing and promotion on alcohol-related social problems.

Young people's exposure to point-of-sale tobacco products and promotions.

PubMed

Stead, M; Eadie, D; MacKintosh, A M; Best, C; Miller, M; Haseen, F; Pearce, J R; Tisch, C; Macdonald, L; MacGregor, A; Amos, A; van der Sluijs, W; Frank, J W; Haw, S

2016-07-01

Point of sale (POS) displays are one of the most important forms of tobacco marketing still permitted in many countries. Reliable methods for measuring exposure to such displays are needed in order to assess their potential impact, particularly on smoking attitudes and uptake among young people. In this study we use a novel method for evaluating POS exposure based on young people's use of retail outlets and recall of tobacco displays and observational data on the characteristics of displays. Observational audit of retail outlets (n = 96) and school-based pupil survey (n = 1482) in four Scottish communities reflecting different levels of social deprivation and urbanisation, conducted in 2013 before legislation to remove POS displays was implemented in supermarkets. Measures were taken of: visibility and placement of tobacco displays; internal and external advertising; display unit size, branding and design; visibility of pack warnings; proximity of tobacco products to products of potential interest to children and young people; pupils' self-reported frequency of visiting retail outlets; and pupils' recall of tobacco displays. Variation in POS exposure across social and demographic groups was assessed. Displays were highly visible within outlets and, in over half the stores, from the public footway outside. Tobacco products were displayed in close proximity to products of interest to children (e.g. confectionery, in 70% of stores). Eighty percent of pupils recalled seeing tobacco displays, with those from deprived areas more likely to recall displays in small shops. When confectioners, tobacconists and newsagents (CTNs) and grocery/convenience stores (two of the outlet types most often visited by young people) were examined separately, average tobacco display unit sizes were significantly larger in those outlets in more deprived areas. POS displays remain a key vector in most countries for advertising tobacco products, and it is important to develop robust measures of exposure. The data reported in this paper provide a baseline measure for evaluating the efficacy of legislation prohibiting such displays. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Welch, B.L.; Briggs, S.F.; Johansen, J.H.

Big sagebrush (Artemisia tridentata Nutt.) seeds were stored in three different environments; cool, constant temperature (refrigerator 10 degs. C); room temperature (14 to 24 degs. C); and a nonheated warehouse (-28 to +44 degs. C). In all three cases, humidity was held constant and equal. Significant drop in seed viability occurred first in the seed stored in the nonheated warehouse, followed by seed stored at room temperatures, and then seed stored at cool temperatures. It appeared from this study and studies by others that humidity control is more important to maintaining seed viability than temperature control. The old adage simplymore » states `store seeds in a cool and dry place` - but first make sure the seeds have been properly dried. Drying sagebrush seed during the cool, wet weather of the harvesting period creates special challenges to the producer.« less

Increased tolerance of Vibrio cholerae O1 to temperature, pH, or drying associated with colonization of shrimp carapaces.

PubMed

Castro-Rosas, J; Escartín, E F

2005-07-15

External surfaces of samples of shrimp carapace were inoculated with Vibrio cholerae and stored at 22 degrees C for 1 h in a moist environment to facilitate their adhesion, or for 24 h to permit their colonization of the material. Colonizing cells showed a higher resistance to the effects of high temperatures, low pH, and desiccation conditions than adherent cells. Periods of 10, 5, and 3 min and 0 s were required to inactivate the pathogen when attached cells were exposed to 50, 60, 65, or 70 degrees C. The corresponding times for colonizing cells were 30, 15, 10, and 1 min. At pH 2.5 numbers of attached V. cholerae were reduced by >5 log after 16 min, whereas the reduction of colonizing cells was only 2.8 log. The survival times of the microorganism on dried carapaces stored at 5 and 22 degrees C were, respectively, 60 and 10 min for adherent cells, and 12 and 4 h for colonizing cells. The increased resistance to the effects of high temperatures, low pH, and desiccation of V. cholerae O1 colonizing shrimp carapaces may have significant implications for food safety and the epidemiology of cholera.

The MicroActive project: automatic detection of disease-related molecular cell activity

NASA Astrophysics Data System (ADS)

Furuberg, Liv; Mielnik, Michal; Johansen, Ib-Rune; Voitel, Jörg; Gulliksen, Anja; Solli, Lars; Karlsen, Frank; Bayer, Tobias; Schönfeld, Friedhelm; Drese, Klaus; Keegan, Helen; Martin, Cara; O'Leary, John; Riegger, Lutz; Koltay, Peter

2007-05-01

The aim of the MicroActive project is to develop an instrument for molecular diagnostics. The instrument will first be tested for patient screening for a group of viruses causing cervical cancer. Two disposable polymer chips with reagents stored on-chip will be inserted into the instrument for each patient sample. The first chip performs sample preparation of the epithelial cervical cells while mRNA amplification and fluorescent detection takes place in the second chip. More than 10 different virus markers will be analysed in one chip. We report results on sub-functions of the amplification chip. The sample is split into smaller droplets, and the droplets move in parallel channels containing different dried reagents for the different analyses. We report experimental results on parallel droplet movement control using one external pump only, combined with hydrophobic valves. Valve burst pressures are controlled by geometry. We show droplet control using valves with burst pressures between 800 and 4500 Pa. We also monitored the re-hydration times for two necessary dried reagents. After sample insertion, uniform concentration of the reagents in the droplet was reached after respectively 60 s and 10 min. These times are acceptable for successful amplification. Finally we have shown positive amplification of HPV type 16 using dried enzymes stored in micro chambers.

Zinc-sensitive MRI contrast agent detects differential release of Zn(II) ions from the healthy vs. malignant mouse prostate.

PubMed

Clavijo Jordan, M Veronica; Lo, Su-Tang; Chen, Shiuhwei; Preihs, Christian; Chirayil, Sara; Zhang, Shanrong; Kapur, Payal; Li, Wen-Hong; De Leon-Rodriguez, Luis M; Lubag, Angelo J M; Rofsky, Neil M; Sherry, A Dean

2016-09-13

Many secretory tissues release Zn(II) ions along with other molecules in response to external stimuli. Here we demonstrate that secretion of Zn(II) ions from normal, healthy prostate tissue is stimulated by glucose in fasted mice and that release of Zn(II) can be monitored by MRI. An ∼50% increase in water proton signal enhancement is observed in T1-weighted images of the healthy mouse prostate after infusion of a Gd-based Zn(II) sensor and an i.p. bolus of glucose. Release of Zn(II) from intracellular stores was validated in human epithelial prostate cells in vitro and in surgically exposed prostate tissue in vivo using a Zn(II)-sensitive fluorescent probe known to bind to the extracellular surface of cells. Given the known differences in intracellular Zn(II) stores in healthy versus malignant prostate tissues, the Zn(II) sensor was then evaluated in a transgenic adenocarcinoma of the mouse prostate (TRAMP) model in vivo. The agent proved successful in detecting small malignant lesions as early as 11 wk of age, making this noninvasive MR imaging method potentially useful for identifying prostate cancer in situations where it may be difficult to detect using current multiparametric MRI protocols.

A Waist-Worn Inertial Measurement Unit for Long-Term Monitoring of Parkinson’s Disease Patients

PubMed Central

Rodríguez-Martín, Daniel; Pérez-López, Carlos; Samà, Albert; Català, Andreu; Moreno Arostegui, Joan Manuel; Cabestany, Joan; Mestre, Berta; Alcaine, Sheila; Prats, Anna; de la Cruz Crespo, María; Bayés, Àngels

2017-01-01

Inertial measurement units (IMUs) are devices used, among other fields, in health applications, since they are light, small and effective. More concretely, IMUs have been demonstrated to be useful in the monitoring of motor symptoms of Parkinson’s disease (PD). In this sense, most of previous works have attempted to assess PD symptoms in controlled environments or short tests. This paper presents the design of an IMU, called 9 × 3, that aims to assess PD symptoms, enabling the possibility to perform a map of patients’ symptoms at their homes during long periods. The device is able to acquire and store raw inertial data for artificial intelligence algorithmic training purposes. Furthermore, the presented IMU enables the real-time execution of the developed and embedded learning models. Results show the great flexibility of the 9 × 3, storing inertial information and algorithm outputs, sending messages to external devices and being able to detect freezing of gait and bradykinetic gait. Results obtained in 12 patients exhibit a sensitivity and specificity over 80%. Additionally, the system enables working 23 days (at waking hours) with a 1200 mAh battery and a sampling rate of 50 Hz, opening up the possibility to be used for other applications like wellbeing and sports. PMID:28398265

Autonomous Graphene Vessel for Suctioning and Storing Liquid Body of Spilled Oil.

PubMed

Kim, Taewoo; Lee, Jeong Seok; Lee, Geonhui; Seo, Dong Kyun; Baek, Youngbin; Yoon, Jeyong; Oh, Seung M; Kang, Tae June; Lee, Hong H; Kim, Yong Hyup

2016-02-29

Despite remarkable strides in science and technology, the strategy for spilled oil collection has remained almost the same since the 1969 Santa Barbara oil spill. The graphene vessel devised here can bring about an important yet basic change in the strategy for spilled oil collection. When it is placed on the oil-covered seawater, the graphene vessel selectively separates the oil, then collects and stores the collected oil in the vessel all by itself without any external power inputs. Capillarity and gravity work together to fill this proto-type graphene vessel with the spilled oil at a rate that is higher than 20,000 liters per square meter per hour (LMH) with oil purity better than 99.9%, and allow the vessel to withstand a water head of 0.5 m. The vessel also has a superb chemical stability and recyclability. An expanded oil contact area, considerably greater than the thickness of the oil layer, forms at the reduced graphene oxide (rGO) foam interface upon contact with the spilled oil. This expanded contact area does not change much even when the oil layer thins out. As a result, the high oil collection rate is maintained throughout the recovery of spilled oil.

Autonomous Graphene Vessel for Suctioning and Storing Liquid Body of Spilled Oil

PubMed Central

Kim, Taewoo; Lee, Jeong Seok; Lee, Geonhui; Seo, Dong Kyun; Baek, Youngbin; Yoon, Jeyong; Oh, Seung M.; Kang, Tae June; Lee, Hong H.; Kim, Yong Hyup

2016-01-01

Despite remarkable strides in science and technology, the strategy for spilled oil collection has remained almost the same since the 1969 Santa Barbara oil spill. The graphene vessel devised here can bring about an important yet basic change in the strategy for spilled oil collection. When it is placed on the oil-covered seawater, the graphene vessel selectively separates the oil, then collects and stores the collected oil in the vessel all by itself without any external power inputs. Capillarity and gravity work together to fill this proto-type graphene vessel with the spilled oil at a rate that is higher than 20,000 liters per square meter per hour (LMH) with oil purity better than 99.9%, and allow the vessel to withstand a water head of 0.5 m. The vessel also has a superb chemical stability and recyclability. An expanded oil contact area, considerably greater than the thickness of the oil layer, forms at the reduced graphene oxide (rGO) foam interface upon contact with the spilled oil. This expanded contact area does not change much even when the oil layer thins out. As a result, the high oil collection rate is maintained throughout the recovery of spilled oil. PMID:26923622

Semantic Web repositories for genomics data using the eXframe platform.

PubMed

Merrill, Emily; Corlosquet, Stéphane; Ciccarese, Paolo; Clark, Tim; Das, Sudeshna

2014-01-01

With the advent of inexpensive assay technologies, there has been an unprecedented growth in genomics data as well as the number of databases in which it is stored. In these databases, sample annotation using ontologies and controlled vocabularies is becoming more common. However, the annotation is rarely available as Linked Data, in a machine-readable format, or for standardized queries using SPARQL. This makes large-scale reuse, or integration with other knowledge bases very difficult. To address this challenge, we have developed the second generation of our eXframe platform, a reusable framework for creating online repositories of genomics experiments. This second generation model now publishes Semantic Web data. To accomplish this, we created an experiment model that covers provenance, citations, external links, assays, biomaterials used in the experiment, and the data collected during the process. The elements of our model are mapped to classes and properties from various established biomedical ontologies. Resource Description Framework (RDF) data is automatically produced using these mappings and indexed in an RDF store with a built-in Sparql Protocol and RDF Query Language (SPARQL) endpoint. Using the open-source eXframe software, institutions and laboratories can create Semantic Web repositories of their experiments, integrate it with heterogeneous resources and make it interoperable with the vast Semantic Web of biomedical knowledge.

High-voltage pulsed generator for dynamic fragmentation of rocks

NASA Astrophysics Data System (ADS)

Kovalchuk, B. M.; Kharlov, A. V.; Vizir, V. A.; Kumpyak, V. V.; Zorin, V. B.; Kiselev, V. N.

2010-10-01

A portable high-voltage (HV) pulsed generator has been designed for rock fragmentation experiments. The generator can be used also for other technological applications. The installation consists of low voltage block, HV block, coaxial transmission line, fragmentation chamber, and control system block. Low voltage block of the generator, consisting of a primary capacitor bank (300 μF) and a thyristor switch, stores pulse energy and transfers it to the HV block. The primary capacitor bank stores energy of 600 J at the maximum charging voltage of 2 kV. HV block includes HV pulsed step up transformer, HV capacitive storage, and two electrode gas switch. The following technical parameters of the generator were achieved: output voltage up to 300 kV, voltage rise time of ˜50 ns, current amplitude of ˜6 kA with the 40 Ω active load, and ˜20 kA in a rock fragmentation regime (with discharge in a rock-water mixture). Typical operation regime is a burst of 1000 pulses with a frequency of 10 Hz. The operation process can be controlled within a wide range of parameters. The entire installation (generator, transmission line, treatment chamber, and measuring probes) is designed like a continuous Faraday's cage (complete shielding) to exclude external electromagnetic perturbations.

High-voltage pulsed generator for dynamic fragmentation of rocks.

PubMed

Kovalchuk, B M; Kharlov, A V; Vizir, V A; Kumpyak, V V; Zorin, V B; Kiselev, V N

2010-10-01

A portable high-voltage (HV) pulsed generator has been designed for rock fragmentation experiments. The generator can be used also for other technological applications. The installation consists of low voltage block, HV block, coaxial transmission line, fragmentation chamber, and control system block. Low voltage block of the generator, consisting of a primary capacitor bank (300 μF) and a thyristor switch, stores pulse energy and transfers it to the HV block. The primary capacitor bank stores energy of 600 J at the maximum charging voltage of 2 kV. HV block includes HV pulsed step up transformer, HV capacitive storage, and two electrode gas switch. The following technical parameters of the generator were achieved: output voltage up to 300 kV, voltage rise time of ∼50 ns, current amplitude of ∼6 kA with the 40 Ω active load, and ∼20 kA in a rock fragmentation regime (with discharge in a rock-water mixture). Typical operation regime is a burst of 1000 pulses with a frequency of 10 Hz. The operation process can be controlled within a wide range of parameters. The entire installation (generator, transmission line, treatment chamber, and measuring probes) is designed like a continuous Faraday's cage (complete shielding) to exclude external electromagnetic perturbations.

Formative Evaluation for a Healthy Corner Store Initiative in Pitt County, North Carolina: Assessing the Rural Food Environment, Part 1

PubMed Central

Bringolf, Karamie R.; Lawton, Katherine K.; McGuirt, Jared T.; Wall-Bassett, Elizabeth; Morgan, Jo; Laska, Melissa Nelson; Sharkey, Joseph R.

2013-01-01

Introduction Obesity prevalence in the rural United States is higher than in urban or suburban areas, perhaps as a result of the food environment. Because rural residents live farther from supermarkets than their urban- and suburban-dwelling counterparts, they may be more reliant on smaller corner stores that offer fewer healthful food items. Methods As part of a Communities Putting Prevention to Work (CPPW) healthy corner store initiative, we reviewed audit tools in the fall of 2010 to measure the consumer food environment in eastern North Carolina and chose the NEMS-S-Rev (Nutrition Environment Measures Survey-Stores-Revised) to assess 42 food stores. During the spring and summer of 2011, 2 trained graduate assistants audited stores, achieving interrater reliability of at least 80%. NEMS-S-Rev scores of stores in rural versus urban areas were compared. Results Overall, healthful foods were less available and of lower quality in rural areas than in urban areas. NEMS-S-Rev scores indicated that healthful foods were more likely to be available and had similar pricing and quality in rural corner stores than in urban corner stores. Conclusion Food store audit data provided a baseline to implement and evaluate a CPPW healthy corner store initiative in Pitt County. This work serves as a case study, providing lessons learned for engaging community partners when conducting rural food store audits. PMID:23866165

Effect of conventional and square stores on the longitudinal aerodynamic characteristics of a fighter aircraft model at supersonic speeds. [in the langley unitary plan wind tunnel

NASA Technical Reports Server (NTRS)

Monta, W. J.

1980-01-01

The effects of conventional and square stores on the longitudinal aerodynamic characteristics of a fighter aircraft configuration at Mach numbers of 1.6, 1.8, and 2.0 was investigated. Five conventional store configurations and six arrangements of a square store configuration were studied. All configurations of the stores produced small, positive increments in the pitching moment throughout the angle-of-attack range, but the configuration with area ruled wing tanks also had a slight decrease on stability at the higher angles of attack. There were some small changes in lift coefficient because of the addition of the stores, causing the drag increment to vary with the lift coefficient. As a result, there were corresponding changes in the increments of the maximum lift drag ratios. The store drag coefficient based on the cross sectional area of the stores ranged from a maximum of 1.1 for the configuration with three Maverick missiles to a minimum of about .040 for the two MK-84 bombs and the arrangements with four square stores touching or two square stores in tandem. Square stores located side by side yielded about 0.50 in the aft position compared to 0.74 in the forward position.

Factors associated with supermarket and convenience store closure: a discrete time spatial survival modelling approach.

PubMed

Warren, Joshua L; Gordon-Larsen, Penny

2018-06-01

While there is a literature on the distribution of food stores across geographic and social space, much of this research uses cross-sectional data. Analyses attempting to understand whether the availability of stores across neighborhoods is associated with diet and/or health outcomes are limited by a lack of understanding of factors that shape the emergence of new stores and the closure of others. We used quarterly data on supermarket and convenience store locations spanning seven years (2006-2012) and tract-level census data in four US cities: Birmingham, Alabama; Chicago, Illinois; Minneapolis, Minnesota; San Francisco, California. A spatial discrete-time survival model was used to identify factors associated with an earlier and/or later closure time of a store. Sales volume was typically the strongest indicator of store survival. We identified heterogeneity in the association between tract-level poverty and racial composition with respect to store survival. Stores in high poverty, non-White tracts were often at a disadvantage in terms of survival length. The observed patterns of store survival varied by some of the same neighborhood sociodemographic factors associated with lifestyle and health outcomes, which could lead to confusion in interpretation in studies of the estimated effects of introduction of food stores into neighborhoods on health.

Changes in food and beverage environments after an urban corner store intervention.

PubMed

Cavanaugh, Erica; Green, Sarah; Mallya, Giridhar; Tierney, Ann; Brensinger, Colleen; Glanz, Karen

2014-08-01

In response to the obesity epidemic, interventions to improve the food environment in corner stores have gained attention. This study evaluated the availability, quality, and price of foods in Philadelphia corner stores before and after a healthy corner store intervention with two levels of intervention intensity ("basic" and "conversion"). Observational measures of the food environment were completed in 2011 and again in 2012 in corner stores participating in the intervention, using the Nutrition Environment Measures Survey for Corner Stores (NEMS-CS). Main analyses included the 211 stores evaluated at both time-points. A time-by-treatment interaction analysis was used to evaluate the changes in NEMS-CS scores by intervention level over time. Availability of fresh fruit increased significantly in conversion stores over time. Specifically, there were significant increases in the availability of apples, oranges, grapes, and broccoli in conversion stores over time. Conversion stores showed a trend toward a significantly larger increase in the availability score compared to basic stores over time. Interventions aimed at increasing healthy food availability are associated with improvements in the availability of low-fat milk, fruits, and some vegetables, especially when infrastructure changes, such as refrigeration and shelving enhancements, are offered. Copyright © 2014 Elsevier Inc. All rights reserved.

There’s more to food store choice than proximity: a questionnaire development study

PubMed Central

2013-01-01

Background Proximity of food stores is associated with dietary intake and obesity; however, individuals frequently shop at stores that are not the most proximal. Little is known about other factors that influence food store choice. The current research describes the development of the Food Store Selection Questionnaire (FSSQ) and describes preliminary results of field testing the questionnaire. Methods Development of the FSSQ involved a multidisciplinary literature review, qualitative analysis of focus group transcripts, and expert and community reviews. Field testing consisted of 100 primary household food shoppers (93% female, 64% African American), in rural and urban Arkansas communities, rating FSSQ items as to their importance in store choice and indicating their top two reasons. After eliminating 14 items due to low mean importance scores and high correlations with other items, the final FSSQ questionnaire consists of 49 items. Results Items rated highest in importance were: meat freshness; store maintenance; store cleanliness; meat varieties; and store safety. Items most commonly rated as top reasons were: low prices; proximity to home; fruit/vegetable freshness; fruit/vegetable variety; and store cleanliness. Conclusions The FSSQ is a comprehensive questionnaire for detailing key reasons in food store choice. Although proximity to home was a consideration for participants, there were clearly other key factors in their choice of a food store. Understanding the relative importance of these different dimensions driving food store choice in specific communities may be beneficial in informing policies and programs designed to support healthy dietary intake and obesity prevention. PMID:23773428

There's more to food store choice than proximity: a questionnaire development study.

PubMed

Krukowski, Rebecca A; Sparks, Carla; DiCarlo, Marisha; McSweeney, Jean; West, Delia Smith

2013-06-17

Proximity of food stores is associated with dietary intake and obesity; however, individuals frequently shop at stores that are not the most proximal. Little is known about other factors that influence food store choice. The current research describes the development of the Food Store Selection Questionnaire (FSSQ) and describes preliminary results of field testing the questionnaire. Development of the FSSQ involved a multidisciplinary literature review, qualitative analysis of focus group transcripts, and expert and community reviews. Field testing consisted of 100 primary household food shoppers (93% female, 64% African American), in rural and urban Arkansas communities, rating FSSQ items as to their importance in store choice and indicating their top two reasons. After eliminating 14 items due to low mean importance scores and high correlations with other items, the final FSSQ questionnaire consists of 49 items. Items rated highest in importance were: meat freshness; store maintenance; store cleanliness; meat varieties; and store safety. Items most commonly rated as top reasons were: low prices; proximity to home; fruit/vegetable freshness; fruit/vegetable variety; and store cleanliness. The FSSQ is a comprehensive questionnaire for detailing key reasons in food store choice. Although proximity to home was a consideration for participants, there were clearly other key factors in their choice of a food store. Understanding the relative importance of these different dimensions driving food store choice in specific communities may be beneficial in informing policies and programs designed to support healthy dietary intake and obesity prevention.

Food and beverage purchases in corner stores, gas-marts, pharmacies and dollar stores.

PubMed

Caspi, Caitlin E; Lenk, Kathleen; Pelletier, Jennifer E; Barnes, Timothy L; Harnack, Lisa; Erickson, Darin J; Laska, Melissa N

2017-10-01

Little is known about customer purchases of foods and beverages from small and non-traditional food retailers (i.e. corner stores, gas-marts, dollar stores and pharmacies). The present study aimed to: (i) describe customer characteristics, shopping frequency and reasons for shopping at small and non-traditional food retailers; and (ii) describe food/beverage purchases and their nutritional quality, including differences across store type. Data were collected through customer intercept interviews. Nutritional quality of food/beverage purchases was analysed; a Healthy Eating Index-2010 (HEI-2010) score for purchases was created by aggregating participant purchases at each store. Small and non-traditional food stores that were not WIC-authorized in Minneapolis and St. Paul, MN, USA. Customers (n 661) from 105 food retailers. Among participants, 29 % shopped at the store at least once daily; an additional 44 % shopped there at least once weekly. Most participants (74 %) cited convenient location as the primary draw to the store. Customers purchased a median of 2262 kJ (540 kcal), which varied by store type (P=0·04). The amount of added sugar far surpassed national dietary recommendations. At dollar stores, participants purchased a median of 5302 kJ (1266 kcal) for a median value of $US 2·89. Sugar-sweetened beverages were the most common purchase. The mean HEI-2010 score across all stores was 36·4. Small and non-traditional food stores contribute to the urban food environment. Given the poor nutritional quality of purchases, findings support the need for interventions that address customer decision making in these stores.

Food marketing targeting youth and families: what do we know about stores where moms actually shop?

PubMed

Grigsby-Toussaint, Diana S; Rooney, Mary R

2013-01-01

Although efforts are underway to examine marketing that targets the youth and families in the retail food store environment, few studies have specifically focused on stores that families identify as their primary sites for food shopping. Between November 2011 and April 2012, we examined the frequency and types of marketing techniques of 114 packaged and nonpackaged items in 24 food stores that mothers of young children in Champaign County, IL, said they commonly frequented. Chi-square tests were used to determine whether significant differences existed between items with regard to marketing by store type, store food-assistance-program acceptance (i.e., WIC), and claims. Overall, stores accepting WIC and convenience stores had higher frequencies of marketing compared to non-WIC and grocery stores. Fruits and vegetables had the lowest frequency of any marketing claim, while salty snacks and soda had the highest frequency of marketing claims. Nutrition claims were the most common across all items, followed by taste, suggested use, fun, and convenience. Television tie-ins and cartoons were observed more often than movie tie-ins and giveaways. Our results suggest an opportunity to promote healthful items more efficiently by focusing efforts on stores where mothers actually shop.

Choice architecture to promote fruit and vegetable purchases by families participating in the Special Supplemental Program for Women, Infants and Children (WIC): randomized corner store pilot study

PubMed Central

Thorndike, Anne N.; Bright, Oliver-John M.; Dimond, Melissa A.; Fishman, Ronald; Levy, Douglas E.

2017-01-01

Objective Conduct a pilot study to determine if improving the visibility and quality of fresh produce (choice architecture) in corner stores would increase fruit/vegetable purchases by families participating in the Special Supplemental Nutrition Program for Women, Infants and Children (WIC). Design Six stores were randomly assigned to choice architecture intervention or control. Store-level WIC sales data were provided by the state. Primary outcomes were WIC fruit/vegetable voucher and non-fruit/vegetable voucher sales, comparing trends from baseline (December 2012–October 2013) to the five month intervention period (December 2013–April 2014). Secondary outcomes were differences in customer self-reported fruit/vegetable purchases between baseline and the end of intervention. Setting Chelsea, Massachusetts, a low-income urban community. Subjects 575 adult customers completing store exit interviews. Results During baseline, WIC fruit/vegetable and non-fruit/vegetable sales decreased in both the intervention and control stores by $16/month. During the intervention period, WIC fruit/vegetable sales increased in intervention stores by $40/month but decreased in control stores by $23/month (difference in trends $63/month, 95% CI, $4–121/month; p=0.036); WIC non-fruit/vegetable sales were not different (p=0.45). Comparing baseline to intervention period exit interview responses by customers participating in WIC (N=134), intervention store customers reported increased fruit/vegetable purchases compared to control store customers (18% vs. −2%), but this did not achieve statistical significance (p=0.11). Conclusions Placement of fruit/vegetables near the front of corner stores increased purchase of produce by customers using WIC. New policies that incentivize stores to stock and prominently display good quality produce could promote healthier food choices of low-income families. PMID:27890020

Effects of Time and Storage Conditions on the Chemical and Microbiologic Stability of Diluted Buprenorphine for Injection

PubMed Central

DenHerder, Johnathan M; Reed, Ralph L; Sargent, Jennifer L; Bobe, Gerd; Stevens, Jan F; Diggs, Helen E

2017-01-01

Buprenorphine is a partial μ-opioid agonist used for analgesia. Due to the small size of laboratory rodents, buprenorphine HCl is typically diluted 10- or 20-fold with a sterile diluent, such as saline, for accurate dosing. Protocols for preparing and storing diluted buprenorphine vary by institution, and little published information is available regarding stability and beyond-use dating of specific buprenorphine preparations. The purpose of this study was to determine the chemical and microbiologic stability of diluted buprenorphine stored for a maximum of 180 d. Buprenorphine HCl was diluted 1:10 into sterile bacteriostatic saline by using aseptic technique. Diluted samples were stored in glass vials or plastic syringes, protected from light, and maintained at refrigerated or room temperature for as long as 180 d. Aerobic and anaerobic cultures on all stored samples were negative for bacterial and fungal growth. According to HPLC analysis, diluted buprenorphine stored in glass vials experienced less than 10% loss when stored for 180 d at either refrigerated or room temperature. However, the concentration of buprenorphine stored in syringes declined rapidly to more than 80% loss at room temperature and 28% loss in the refrigerator after 180 d. According to the results of this study, diluted buprenorphine stored in glass vials retains more than 90% of the initial concentration and is microbiologically stable for 180 d. However, our data suggest that, regardless of the duration, storing diluted buprenorphine in plastic syringes is inadvisable. PMID:28724496

Cost of Children's Healthy vs Unhealthy Snacks Does Not Differ at Convenience Stores.

PubMed

DeWeese, Robin S; Ohri-Vachaspati, Punam

2017-03-01

This study compared the prices of unhealthy (chips) and healthy (ready-to-eat fruit) snacks that students are likely to purchase from corner stores. Snacks were purchased from 325 New Jersey corner stores; chip prices were compared with fruit prices overall and by store sales volume and block group characteristics. Prices did not differ significantly between chips and fruit in the overall sample in which both items were available (n = 104) (chips: $0.46 ± $0.15; fruit: $0.49 ± $0.19; P = .48) or by store or block group characteristics. Neither mean fruit prices nor mean chip prices differed by store sales volume or by neighborhood characteristics. Promoting ready-to-eat fruits in corner stores to children as a price-neutral alternative to calorically dense snacks can be a viable strategy to improve the nutritional quality of snacks commonly purchased at corner stores. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Shopping list development and use of advertisements' pre-store food-buying practices within different socio-economic status areas in South Africa.

PubMed

Duffett, Rodney Graeme; Foster, Crystal

2017-01-01

The purpose of this paper is to determine whether there is a difference in the development of shopping lists and use of advertisements as pre-store food-buying practices in terms of planned shopping by South African consumers who dwell in different socio-economic status (SES) areas. The paper also considers the influence of shopper and socio-demographic characteristics on pre-store food-buying practices in a developing country. A self-administered questionnaire was used to survey 1 200 consumers in retail stores in low, middle and high SES areas in South Africa. A generalised linear model was employed for the statistical analysis of pre-store food-buying practices within the SES area groups in a developing country. South African consumers that reside in high SES area displayed the largest of shopping list development, while consumers who dwell in low SES areas showed the highest incidence of advertisement usage. Several shopper and socio-demographic characteristics were also found to have an influence on pre-store food-buying practices in different SES areas in South Africa. A qualitative approach would offer a deeper understanding of consumers' pre-store food shopping predispositions as opposed to the quantitative approach, which was adopted for this study. A longitudinal design would also provide a more extensive representation of pre-store food shopping practices over a longer time frame than cross-sectional research. The survey was conducted on Saturdays, whereas consumers who shop during the week may have different shopping and socio-demographic characteristics. Astute food brands, marketers and grocery stores could use the findings of this study to assist with their marketing efforts that they direct at consumers in different SES areas in South Africa and other developing countries. The findings of this study may assist consumers in developing countries, especially those who reside in low SES areas, with food-buying strategies to reduce food costs, make wiser purchase decisions and reduce shopping. No study (to the best of the researchers' knowledge) has considered shopping list development and use of advertisements' pre-store food-buying practices in different SES areas in a developing country. Furthermore, there is a dearth of research analysing shopper and socio-demographic characteristics in relation to pre-store food-buying practices among different SES areas in developing and developed countries.

Community measures of low-fat milk consumption: comparing store shelves with households.

PubMed Central

Fisher, B D; Strogatz, D S

1999-01-01

OBJECTIVES: This study examined the relationship between the proportion of milk in food stores that is low-fat and consumption of low-fat milk in the community. METHODS: Data were gathered from 503 stores across 53 New York State zip codes. In 19 zip codes, a telephone survey measured household low-fat milk use. Census data were obtained to examine sociodemographic predictors of the percentage of low-fat milk in stores. RESULTS: The proportion of low-fat milk in stores was directly related to low-fat milk consumption in households and to the median income and urban level of the zip code. CONCLUSIONS: These results support using food store shelf-space observations to estimate low-fat milk consumption. PMID:9949755

Morphology of the spermathecae of twelve species of Triatominae (Hemiptera, Reduviidae) vectors of Chagas disease.

PubMed

Nascimento, Juliana Damieli; Ribeiro, Aline Rimoldi; Almeida, Larissa Aguiar; de Oliveira, Jader; Mendonça, Vagner José; Cilense, Mário; da Rosa, João Aristeu

2017-12-01

Trypanosoma cruzi, the etiological agent of Chagas disease, is transmitted by triatomines that have been described in a large number of studies. Most of those studies are related to external morphology and taxonomy, but some biochemical, genetic and physiological studies have also been published. There are a few publications in the literature about the internal organs of Triatominae, for instance the spermathecae, which are responsible for storing and maintaining the viability of the spermatozoids until the fertilization of the oocytes. This work aims to study the spermathecae of twelve species of triatomines obtained from the Triatominae Insectarium of the Faculty of Pharmaceutical Sciences, UNESP, Araraquara, using optical microscopy and scanning electron microscopy. The spermathecae of the twelve species studied showed three morphological patterns: a) P. herreri sn, P. lignarius, P. megistus, Triatoma brasiliensis, T. juazeirensis, T. sherlocki and T. tibiamaculata have spermathecae with a thin initial portion and an oval-shaped final portion; b) R. montenegrensis, R. nasutus, R. neglectus, R. pictipes and R. prolixus have tubular and winding spermathecae; c) T. infestans has oval spermathecae. In addition to the three morphological patterns, it was noted that each of the twelve species has particular features that differentiate them. Copyright © 2017 Elsevier B.V. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. Persoff

The evaluation of impacts of potential volcanic eruptions on populations and facilities far in the future may involve detailed volcanological studies that differ from traditional hazards analyses. The proximity of Quaternary volcanoes to a proposed repository for disposal of the USA's high-level radioactive waste at Yucca Mountain, Nevada, has required in-depth study of probability and consequences of basaltic igneous activity. Because of the underground nature of the repository, evaluation of the potential effects of dike intrusion and interaction with the waste packages stored in underground tunnels (dnfts) as well as effects of eruption and ash dispersal have been important. Thesemore » studies include analyses of dike propagation, dike-drift intersection, flow of magma into dnfts, heat and volcanic gas migration, atmospheric dispersal of tephra, and redistribution of waste-contaminated tephra by surficial processes. Unlike traditional volcanic hazards studies that focus on impacts on housing, transportation, communications, etc. (to name a small subset), the igneous consequences studies at Yucca Mountain have focused on evaluation of igneous impacts on nuclear waste packages and implications for enhanced radioactive dose on a hypothetical future ({le} 10000 yrs) local population. Potential exposure pathways include groundwater (affected by in-situ degradation of waste packages by igneous heat and corrosion) and inhalation, ingestion, and external exposure due to deposition and redistribution of waste-contaminated tephra.« less

The Prevalence and Marketing of Electronic Cigarettes in Proximity to At-Risk Youths: An Investigation of Point-of-Sale Practices near Alternative High Schools

ERIC Educational Resources Information Center

Miller, Stephen; Pike, James; Chapman, Jared; Xie, Bin; Hilton, Brian N.; Ames, Susan L.; Stacy, Alan W.

2017-01-01

This study examines the point-of-sale marketing practices used to promote electronic cigarettes at stores near schools that serve at-risk youths. One hundred stores selling tobacco products within a half-mile of alternative high schools in Southern California were assessed for this study. Seventy percent of stores in the sample sold electronic…

Cariogenic potential of stored human milk--an in-vitro study.

PubMed

Hegde, Amitha M; Vikyath, Rani

2007-01-01

Human milk samples collected from ten lactating mothers in the K. S. Hegde Medical Hospital, Mangalore were divided into five different parts and stored at different temperatures for varying durations. The pH, buffer capacity and growth of Streptococcus mutans were assessed in each of these samples. There was a fall in pH of human milk stored at various temperatures. The buffer capacity of human milk increased with duration of storage. There was an increase in Streptococcus colony count in stored human milk proportional to the duration of storage and it increased more rapidly in case of milk stored at higher temperatures (0 degrees C - 4 degrees C) compared to the milk stored in the freezer (-19 degrees C). Milk samples stored at room temperature for 6 hours and in the freezer at -19 degrees C for 2 weeks were found to be relatively safe.

[Research on functional diversity of microorganisms on jujube fruit surface in storage].

PubMed

Sha, Yuexia

2009-10-01

Disease during storage caused by microbial infection is a serious problem of jujube fruits. The aim of the study was to characterize the microbial diversity in stored jujube fruits. I used Biolog in experiment. The types of micro-plates were Filamentous Fungi micro-plate and Economicmicro-plate. There was much difference in microbial functional diversity on the surface of stored jujube fruit. The microbial functional diversity of stored 30 days was richer than it of stored 15 days. The diversity, homogeneity and average well color development of jujube used by fruit perservatives were lower than it not used by fruit preservatives. There were six kinds of the characteristic carbon. Our study firstly showed microbial diversity on the surface of stored jujube fruit. Biolog could be applied in the research on microbial functional diversity of fruit surface.

Prepared Food Availability in U.S. Food Stores: A National Study.

PubMed

Zenk, Shannon N; Powell, Lisa M; Isgor, Zeynep; Rimkus, Leah; Barker, Dianne C; Chaloupka, Frank J

2015-10-01

Prepared, ready-to-eat foods comprise a significant part of Americans' diets and are increasingly obtained from food stores. Yet, little is known about the availability and healthfulness of prepared, ready-to-eat food offerings at stores. This study examines associations among community characteristics (racial/ethnic composition, poverty level, urbanicity) and availability of both healthier and less-healthy prepared foods in U.S. supermarkets, grocery stores, and convenience stores. Observational data were collected from 4,361 stores in 317 communities spanning 42 states in 2011 and 2012. Prepared food availability was assessed via one healthier food (salads or salad bar), three less-healthy items (pizza, hot dog/hamburger, taco/burrito/taquito), and one cold sandwich item. In 2014, multivariable generalized linear models were used to test associations with community characteristics. Overall, 63.6% of stores sold prepared foods, with 20.0% offering prepared salads and 36.4% offering at least one less-healthy item. Rural stores were 26% less likely to carry prepared salads (prevalence ratio [PR]=0.74, 95% CI=0.62, 0.88) and 14% more likely to carry at least one less-healthy prepared food item (PR=1.14, 95% CI=1.00, 1.30). Convenience stores in high-poverty communities were less likely to carry prepared salads than those in low-poverty communities (PR=0.64, 95% CI=0.47, 0.87). Among supermarkets, prepared salads were more likely to be carried in majority-white, low-poverty communities than in non-white, high-poverty communities. Increasing the healthfulness of prepared foods within stores may offer an important opportunity to improve the food environment. Copyright © 2015 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Disparities in tobacco marketing and product availability at the point of sale: Results of a national study.

PubMed

Ribisl, Kurt M; D'Angelo, Heather; Feld, Ashley L; Schleicher, Nina C; Golden, Shelley D; Luke, Douglas A; Henriksen, Lisa

2017-12-01

Neighborhood socioeconomic and racial/ethnic disparities exist in the amount and type of tobacco marketing at retail, but most studies are limited to a single city or state, and few have examined flavored little cigars. Our purpose is to describe tobacco product availability, marketing, and promotions in a national sample of retail stores and to examine associations with neighborhood characteristics. At a national sample of 2230 tobacco retailers in the contiguous US, we collected in-person store audit data on: Availability of products (e.g., flavored cigars), quantity of interior and exterior tobacco marketing, presence of price promotions, and marketing with youth appeal. Observational data were matched to census tract demographics. Over 95% of stores displayed tobacco marketing; the average store featured 29.5 marketing materials. 75.1% of stores displayed at least one tobacco product price promotion, including 87.2% of gas/convenience stores and 85.5% of pharmacies. 16.8% of stores featured marketing below three feet, and 81.3% of stores sold flavored cigars, both of which appeal to youth. Stores in neighborhoods with the highest (vs. lowest) concentration of African-American residents had more than two times greater odds of displaying a price promotion (OR=2.1) and selling flavored cigars (OR=2.6). Price promotions were also more common in stores located in neighborhoods with more residents under age 18. Tobacco companies use retail marketing extensively to promote their products to current customers and youth, with disproportionate targeting of African Americans. Local, state, and federal policies are needed to counteract this unhealthy retail environment. Copyright © 2017 Elsevier Inc. All rights reserved.

Childhood Obesity and Neighborhood Food Store Availability in an Inner City Community

PubMed Central

Galvez, Maida P.; Hong, Lu; Choi, Elizabeth; Liao, Laura; Godbold, James; Brenner, Barbara

2009-01-01

Background Prior studies have shown an association between fast food restaurants and adolescent body size. Less is known about the influence of neighborhood food stores on a child's body size. We hypothesized that in the inner-city, minority community of East Harlem, New York, the presence of convenience stores and fast food restaurants near a child's home is associated with increased risk for childhood obesity as measured by body mass index (BMI). Design/Methods Baseline data of 6-8 year old East Harlem boys and girls (n=323) were utilized. Anthropometry (height and weight) were conducted with a standardized protocol. Food store data were collected via a walking survey. Stores located within the same Census block as the child's home address were identified using ArcGIS 8.3. We computed age- and sex-specific BMI-percentiles using CDC national norms. Using odds ratios, we estimated risk of a child's BMI-percentile being in the top tertile based on number and types of food stores on their Census blocks. Results Convenience stores were present in 55% of the surveyed blocks in which a study participant lived, and fast food restaurants were present in 41%. Children (n=177) living on a block with one or more convenience stores (range 1-6) were more likely to have a BMI-percentile in the top tertile (odds ratio 1.90, 95% CI 1.15-3.15), compared with children having no convenience stores (n=146). Conclusions The presence of convenience stores near a child's residence was associated with a higher BMI-percentile. This has potential implications for both child and neighborhood level childhood obesity interventions. PMID:19560992

Grocery Shopping How Individuals and Built Environments Influence Choice of Travel Mode.

PubMed

Jiao, Junfeng; Moudon, Anne Vernez; Drewnowski, Adam

This research investigated the influences of socioeconomic characteristics of individual travelers and of the environments where the travelers live and shop on choice of travel mode for grocery shopping. The data on travel for grocery shopping came from 2,001 respondents to the 2009 Seattle Obesity Study survey in King County, Washington. Eighty-eight percent of the respondents drove to their grocery stores, whereas 12% used transit or taxis, walked, biked, or carpooled. The addresses of 1,994 homes and 1,901 primary grocery stores used by respondents were geographically coded. The characteristics of built environments in the neighborhoods around homes and grocery stores and the distances between those homes and stores were measured in a geographic information system. Four binary logistic models estimated the impact of individual socioeconomic characteristics, distance, and built environments around homes and grocery stores on the travel mode used for grocery shopping. Fourteen variables were significantly related to mode choice. The strongest predictors of driving to the grocery store were more cars per adult household member, more adults per household, living in a single-family house, longer distances between homes and grocery stores (both the stores used and the nearest stores), and more at-ground parking around the grocery store used. Higher street density, more quick-service restaurants around homes, and more nonchain grocery stores near the primary grocery store used were related to not driving. Results suggested that reductions of distances between homes and grocery stores, clustering of grocery stores and other food establishments, and reductions in the amount of the parking around them could lead to less driving for grocery shopping.

Grocery Shopping How Individuals and Built Environments Influence Choice of Travel Mode

PubMed Central

Jiao, Junfeng; Moudon, Anne Vernez; Drewnowski, Adam

2014-01-01

This research investigated the influences of socioeconomic characteristics of individual travelers and of the environments where the travelers live and shop on choice of travel mode for grocery shopping. The data on travel for grocery shopping came from 2,001 respondents to the 2009 Seattle Obesity Study survey in King County, Washington. Eighty-eight percent of the respondents drove to their grocery stores, whereas 12% used transit or taxis, walked, biked, or carpooled. The addresses of 1,994 homes and 1,901 primary grocery stores used by respondents were geographically coded. The characteristics of built environments in the neighborhoods around homes and grocery stores and the distances between those homes and stores were measured in a geographic information system. Four binary logistic models estimated the impact of individual socioeconomic characteristics, distance, and built environments around homes and grocery stores on the travel mode used for grocery shopping. Fourteen variables were significantly related to mode choice. The strongest predictors of driving to the grocery store were more cars per adult household member, more adults per household, living in a single-family house, longer distances between homes and grocery stores (both the stores used and the nearest stores), and more at-ground parking around the grocery store used. Higher street density, more quick-service restaurants around homes, and more nonchain grocery stores near the primary grocery store used were related to not driving. Results suggested that reductions of distances between homes and grocery stores, clustering of grocery stores and other food establishments, and reductions in the amount of the parking around them could lead to less driving for grocery shopping. PMID:25729127

Decentralized robust nonlinear model predictive controller for unmanned aerial systems

NASA Astrophysics Data System (ADS)

Garcia Garreton, Gonzalo A.

The nonlinear and unsteady nature of aircraft aerodynamics together with limited practical range of controls and state variables make the use of the linear control theory inadequate especially in the presence of external disturbances, such as wind. In the classical approach, aircraft are controlled by multiple inner and outer loops, designed separately and sequentially. For unmanned aerial systems in particular, control technology must evolve to a point where autonomy is extended to the entire mission flight envelope. This requires advanced controllers that have sufficient robustness, track complex trajectories, and use all the vehicles control capabilities at higher levels of accuracy. In this work, a robust nonlinear model predictive controller is designed to command and control an unmanned aerial system to track complex tight trajectories in the presence of internal and external perturbance. The Flight System developed in this work achieves the above performance by using: 1. A nonlinear guidance algorithm that enables the vehicle to follow an arbitrary trajectory shaped by moving points; 2. A formulation that embeds the guidance logic and trajectory information in the aircraft model, avoiding cross coupling and control degradation; 3. An artificial neural network, designed to adaptively estimate and provide aerodynamic and propulsive forces in real-time; and 4. A mixed sensitivity approach that enhances the robustness for a nonlinear model predictive controller overcoming the effect of un-modeled dynamics, external disturbances such as wind, and measurement additive perturbations, such as noise and biases. These elements have been integrated and tested in simulation and with previously stored flight test data and shown to be feasible.

Healthfulness of Foods Advertised in Small and Nontraditional Urban Stores in Minneapolis–St. Paul, Minnesota, 2014

PubMed Central

Pelletier, Jennifer E.; Erickson, Darin J.; Caspi, Caitlin E.; Harnack, Lisa J.; Laska, Melissa N.

2016-01-01

Introduction Shopping at small food stores, such as corner stores and convenience stores, is linked with unhealthful food and beverage purchases, poor diets, and high risk of obesity. However, information on how foods and beverages are marketed at small stores is limited. The objective of this study was to examine advertisements and product placements for healthful and less healthful foods and beverages at small stores in Minneapolis–St. Paul, Minnesota. Methods We conducted in-store audits of 119 small and nontraditional food retailers (corner/small grocery stores, food–gas marts, pharmacies, and dollar stores) randomly selected from licensing lists in Minneapolis–St. Paul in 2014. We analyzed data on exterior and interior advertisements of foods and beverages and product placement. Results Exterior and interior advertisements for healthful foods and beverages were found in less than half of stores (exterior, 37% [44 of 119]; interior, 20% [24 of 119]). Exterior and interior advertisements for less healthful items were found in approximately half of stores (exterior, 46% [55 of 119]); interior, 66% [78 of 119]). Of the 4 store types, food–gas marts were most likely to have exterior and interior advertisements for both healthful and less healthful items. Corner/small grocery stores and dollar stores had fewer advertisements of any type. Most stores (77%) had at least 1 healthful item featured as an impulse buy (ie, an item easily reached at checkout), whereas 98% featured at least 1 less healthful item as an impulse buy. Conclusion Findings suggest imbalanced advertising and product placement of healthful and less healthful foods and beverages at small food stores in Minneapolis–St. Paul; less healthful items were more apt to be featured as impulse buys. Future interventions and polices should encourage reductions in advertisements and impulse-buy placements of unhealthful products, particularly in food–gas marts, and encourage advertisements of healthful products. PMID:27831683

Healthfulness of Foods Advertised in Small and Nontraditional Urban Stores in Minneapolis-St. Paul, Minnesota, 2014.

PubMed

Barnes, Timothy L; Pelletier, Jennifer E; Erickson, Darin J; Caspi, Caitlin E; Harnack, Lisa J; Laska, Melissa N

2016-11-10

Shopping at small food stores, such as corner stores and convenience stores, is linked with unhealthful food and beverage purchases, poor diets, and high risk of obesity. However, information on how foods and beverages are marketed at small stores is limited. The objective of this study was to examine advertisements and product placements for healthful and less healthful foods and beverages at small stores in Minneapolis-St. Paul, Minnesota. We conducted in-store audits of 119 small and nontraditional food retailers (corner/small grocery stores, food-gas marts, pharmacies, and dollar stores) randomly selected from licensing lists in Minneapolis-St. Paul in 2014. We analyzed data on exterior and interior advertisements of foods and beverages and product placement. Exterior and interior advertisements for healthful foods and beverages were found in less than half of stores (exterior, 37% [44 of 119]; interior, 20% [24 of 119]). Exterior and interior advertisements for less healthful items were found in approximately half of stores (exterior, 46% [55 of 119]); interior, 66% [78 of 119]). Of the 4 store types, food-gas marts were most likely to have exterior and interior advertisements for both healthful and less healthful items. Corner/small grocery stores and dollar stores had fewer advertisements of any type. Most stores (77%) had at least 1 healthful item featured as an impulse buy (ie, an item easily reached at checkout), whereas 98% featured at least 1 less healthful item as an impulse buy. Findings suggest imbalanced advertising and product placement of healthful and less healthful foods and beverages at small food stores in Minneapolis-St. Paul; less healthful items were more apt to be featured as impulse buys. Future interventions and polices should encourage reductions in advertisements and impulse-buy placements of unhealthful products, particularly in food-gas marts, and encourage advertisements of healthful products.

Identifying retail food stores to evaluate the food environment.

PubMed

Hosler, Akiko S; Dharssi, Aliza

2010-07-01

The availability of food stores is the most frequently used measure of the food environment, but identifying them poses a technical challenge. This study evaluated eight administrative lists of retailers for identifying food stores in an urban community. Lists of inspected food stores (IFS), cigarette retailers, liquor licenses, lottery retailers, gasoline retailers, farmers' markets, and authorized WIC (Program for Women, Infants, and Children) and Supplemental Nutrition Assistance Program (SNAP) retailers for Albany NY were obtained from government agencies. Sensitivity and positive predictive value (PPV) were assessed, using ground-truthing as the validation measure. Stores were also grouped by the number of lists they were documented on, and the proportion of food stores in each group was obtained. Data were collected and analyzed in 2009. A total of 166 stores, including four from ground-truthing, were identified. Forty-three stores were disqualified, as a result of having no targeted foods (n=17); being in the access-restricted area of a building (n=15); and being out of business (n=11). Sensitivity was highest in IFS (87.0%), followed by the cigarette retailers' list (76.4%). PPV was highest in WIC and farmers' markets lists (100%), followed by SNAP (97.8%). None of the lists had both sensitivity and PPV greater than 90%. All stores that were listed by four or more lists were food stores. The proportion of food stores was lowest (33.3%) for stores listed by only one list. Individual lists had limited utility for identifying food stores, but when they were combined, the likelihood of a retail store being a food store could be predicted by the number of lists the store was documented on. This information can be used to increase the efficiency of ground-truthing. Copyright 2010 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

Food Store Environment Modifies Intervention Effect on Fruit and Vegetable Intake among Low-Income Women in North Carolina

PubMed Central

Gustafson, Alison A.; Sharkey, Joseph; Samuel-Hodge, Carmen D.; Jones-Smith, Jessica C.; Cai, Jianwen; Ammerman, Alice S.

2012-01-01

Background. The aim of the study is to determine how the food store environment modifies the effects of an intervention on diet among low-income women. Study Design. A 16-week face-to-face behavioral weight loss intervention was delivered among low income midlife women. Methods. The retail food environment for all women was characterized by (1) the number and type of food stores within census tracts; (2) availability of healthy foods in stores where participants shop; (3) an aggregate score of self-reported availability of healthy foods in neighborhood and food stores. Statistical Analyses. Multivariable linear regression was used to model the food store environment as an effect modifier between the intervention effect of fruit and vegetable serving change. Results. Among intervention participants with a low perception of availability of healthy foods in stores, the intervention effect on fruit and vegetable serving change was greater [1.89, 95% CI (0.48, 3.31)] compared to controls. Among intervention participants residing in neighborhoods with few super markets, the intervention effect on fruit and vegetable serving change was greater [1.62, 95% CI (1.27, 1.96)] compared to controls. Conclusion. Results point to how the food store environment may modify the success of an intervention on diet change among low-income women. PMID:22315676

A randomized, controlled study of a healthy corner store initiative on the purchases of urban, low-income youth

PubMed Central

Lent, Michelle R.; Veur, Stephanie S. Vander; McCoy, Tara A.; Wojtanowski, Alexis C.; Sandoval, Brianna; Sherman, Sandy; Komaroff, Eugene; Foster, Gary D.

2014-01-01

Objective Although many initiatives exist to improve the availability of healthy foods in corner stores, few randomized trials have assessed their effects. This study evaluated, in a randomized, controlled trial, the effects of a first-generation healthy corner store intervention on students’ food and beverage purchases over a two-year period. Design and Methods Participants (n=767) were 4th-6th grade students. Ten schools and their nearby corner stores (n=24) were randomly assigned to the healthy corner store intervention or an assessment-only control. Intercept surveys directly assessed the nutritional characteristics of students’ corner store purchases at baseline, 1 and 2 years. Students’ weight and heights were measured at baseline, 1 and 2 years. Results There were no differences in energy content per intercept purchased from control or intervention schools at year 1 (p=0.12) or 2 (p=0.58). There were no differences between control and intervention students in BMI-z score (year 1, p=0.83; year 2, p=0. 98) or obesity prevalence (year 1, p=0.96; year 2, p=0.58). Conclusions A healthy corner store initiative did not result in significant changes in the energy content of corner store purchases or in continuous or categorical measures of obesity. These data will help to inform future interventions. PMID:25311881

Deciphering the plasma membrane hallmarks of apoptotic cells: Phosphatidylserine transverse redistribution and calcium entry

PubMed Central

Martínez, M Carmen; Freyssinet, Jean-Marie

2001-01-01

Background During apoptosis, Ca2+-dependent events participate in the regulation of intracellular and morphological changes including phosphatidylserine exposure in the exoplasmic leaflet of the cell plasma membrane. The occurrence of phosphatidylserine at the surface of specialized cells, such as platelets, is also essential for the assembly of the enzyme complexes of the blood coagulation cascade, as demonstrated by hemorrhages in Scott syndrome, an extremely rare genetic deficiency of phosphatidylserine externalization, without other apparent pathophysiologic consequences. We have recently reported a reduced capacitative Ca2+ entry in Scott cells which may be part of the Scott phenotype. Results Taking advantage of these mutant lymphoblastoid B cells, we have studied the relationship between this mode of Ca2+ entry and phosphatidylserine redistribution during apoptosis. Ca2+ ionophore induced apoptosis in Scott but not in control cells. However, inhibition of store-operated Ca2+ channels led to caspase-independent DNA fragmentation and decrease of mitochondrial membrane potential in both control and Scott cells. Inhibition of cytochrome P450 also reduced capacitative Ca2+ entry and induced apoptosis at comparable extents in control and Scott cells. During the apoptotic process, both control and more markedly Scott cells externalized phosphatidylserine, but in the latter, this membrane feature was however dissociated from several other intracellular changes. Conclusions The present results suggest that different mechanisms account for phosphatidylserine transmembrane migration in cells undergoing stimulation and programmed death. These observations testify to the plasticity of the plasma membrane remodeling process, allowing normal apoptosis even when less fundamental functions are defective. PMID:11701087

Food Marketing Targeting Youth and Families: What Do We Know about Stores Where Moms Actually Shop?

PubMed Central

Grigsby-Toussaint, Diana S.; Rooney, Mary R.

2013-01-01

Although efforts are underway to examine marketing that targets the youth and families in the retail food store environment, few studies have specifically focused on stores that families identify as their primary sites for food shopping. Between November 2011 and April 2012, we examined the frequency and types of marketing techniques of 114 packaged and nonpackaged items in 24 food stores that mothers of young children in Champaign County, IL, said they commonly frequented. Chi-square tests were used to determine whether significant differences existed between items with regard to marketing by store type, store food-assistance-program acceptance (i.e., WIC), and claims. Overall, stores accepting WIC and convenience stores had higher frequencies of marketing compared to non-WIC and grocery stores. Fruits and vegetables had the lowest frequency of any marketing claim, while salty snacks and soda had the highest frequency of marketing claims. Nutrition claims were the most common across all items, followed by taste, suggested use, fun, and convenience. Television tie-ins and cartoons were observed more often than movie tie-ins and giveaways. Our results suggest an opportunity to promote healthful items more efficiently by focusing efforts on stores where mothers actually shop. PMID:24163701

Biomarker development for external CO2 injury prediction in apples through exploration of both transcriptome and DNA methylation changes

PubMed Central

Gapper, Nigel E.; Rudell, David R.; Giovannoni, James J.; Watkins, Chris B.

2013-01-01

Several apple cultivars are susceptible to CO2 injury, a physiological disorder that can be expressed either externally or internally, and which can cause major losses of fruit during controlled atmosphere (CA) storage. Disorder development can also be enhanced using SmartFresh™ technology, based on the inhibition of ethylene perception by 1-methylcyclopropene (1-MCP). Injury development is associated with less mature fruit with lower ethylene production, but the aetiology of the disorder is poorly understood. Here we report on the progress made using mRNAseq approaches to explore the transcriptome during the development of external CO2 injury. Next-generation sequencing was used to mine the apple transcriptome for gene expression changes that are associated with the development of external CO2 injury. ‘Empire’ apples from a single orchard were treated with either 1 µL L−1 1-MCP or 1 g L−1 diphenylamine or left untreated, and then stored in a CA of 5 kPa CO2 and 2 kPa O2. In addition, susceptibility to the disorder in the ‘Empire’ apples from five different orchards was investigated and the methylation state of the ACS1 promoter investigated using McrBC endonuclease digestion and real-time quantitative polymerase chain reaction. Expression of over 30 000 genes, aligned to the apple genome, was monitored, with clear divergence of expression among treatments after 1 day of CA storage. Symptom development, internal ethylene concentrations (IECs) and methylation state of the ACS1 promoter were different for each of five orchards. With transcriptomic changes affected by treatment, this dataset will be useful in discovering biomarkers that assess disorder susceptibility. An inverse correlation between the frequency of this disorder and the IEC was detected in a multiple orchard trial. Differential methylation state of the ACS1 promoter correlated with both IEC and injury occurrence, indicating epigenetic regulation of ethylene biosynthesis and possibly events leading to disorder development. PMID:23671787

Biomarker development for external CO2 injury prediction in apples through exploration of both transcriptome and DNA methylation changes.

PubMed

Gapper, Nigel E; Rudell, David R; Giovannoni, James J; Watkins, Chris B

2013-01-01

Several apple cultivars are susceptible to CO2 injury, a physiological disorder that can be expressed either externally or internally, and which can cause major losses of fruit during controlled atmosphere (CA) storage. Disorder development can also be enhanced using SmartFresh™ technology, based on the inhibition of ethylene perception by 1-methylcyclopropene (1-MCP). Injury development is associated with less mature fruit with lower ethylene production, but the aetiology of the disorder is poorly understood. Here we report on the progress made using mRNAseq approaches to explore the transcriptome during the development of external CO2 injury. Next-generation sequencing was used to mine the apple transcriptome for gene expression changes that are associated with the development of external CO2 injury. 'Empire' apples from a single orchard were treated with either 1 µL L(-1) 1-MCP or 1 g L(-1) diphenylamine or left untreated, and then stored in a CA of 5 kPa CO2 and 2 kPa O2. In addition, susceptibility to the disorder in the 'Empire' apples from five different orchards was investigated and the methylation state of the ACS1 promoter investigated using McrBC endonuclease digestion and real-time quantitative polymerase chain reaction. Expression of over 30 000 genes, aligned to the apple genome, was monitored, with clear divergence of expression among treatments after 1 day of CA storage. Symptom development, internal ethylene concentrations (IECs) and methylation state of the ACS1 promoter were different for each of five orchards. With transcriptomic changes affected by treatment, this dataset will be useful in discovering biomarkers that assess disorder susceptibility. An inverse correlation between the frequency of this disorder and the IEC was detected in a multiple orchard trial. Differential methylation state of the ACS1 promoter correlated with both IEC and injury occurrence, indicating epigenetic regulation of ethylene biosynthesis and possibly events leading to disorder development.

Evaluating the use of in-store measures in retail food stores and restaurants in Brazil.

PubMed

Duran, Ana Clara; Lock, Karen; Latorre, Maria do Rosario D O; Jaime, Patricia Constante

2015-01-01

To assess inter-rater reliability, test-retest reliability, and construct validity of retail food store, open-air food market, and restaurant observation tools adapted to the Brazilian urban context. This study is part of a cross-sectional observation survey conducted in 13 districts across the city of Sao Paulo, Brazil in 2010-2011. Food store and restaurant observational tools were developed based on previously available tools, and then tested it. They included measures on the availability, variety, quality, pricing, and promotion of fruits and vegetables and ultra-processed foods. We used Kappa statistics and intra-class correlation coefficients to assess inter-rater and test-retest reliabilities in samples of 142 restaurants, 97 retail food stores (including open-air food markets), and of 62 restaurants and 45 retail food stores (including open-air food markets), respectively. Construct validity as the tool's abilities to discriminate based on store types and different income contexts were assessed in the entire sample: 305 retail food stores, 8 fruits and vegetable markets, and 472 restaurants. Inter-rater and test-retest reliability were generally high, with most Kappa values greater than 0.70 (range 0.49-1.00). Both tools discriminated between store types and neighborhoods with different median income. Fruits and vegetables were more likely to be found in middle to higher-income neighborhoods, while soda, fruit-flavored drink mixes, cookies, and chips were cheaper and more likely to be found in lower-income neighborhoods. The measures were reliable and able to reveal significant differences across store types and different contexts. Although some items may require revision, results suggest that the tools may be used to reliably measure the food stores and restaurant food environment in urban settings of middle-income countries. Such studies can help .inform health promotion interventions and policies in these contexts.

Evaluating the use of in-store measures in retail food stores and restaurants in Brazil

PubMed Central

Duran, Ana Clara; Lock, Karen; Latorre, Maria do Rosario D O; Jaime, Patricia Constante

2015-01-01

ABSTRACT OBJECTIVE To assess inter-rater reliability, test-retest reliability, and construct validity of retail food store, open-air food market, and restaurant observation tools adapted to the Brazilian urban context. METHODS This study is part of a cross-sectional observation survey conducted in 13 districts across the city of Sao Paulo, Brazil in 2010-2011. Food store and restaurant observational tools were developed based on previously available tools, and then tested it. They included measures on the availability, variety, quality, pricing, and promotion of fruits and vegetables and ultra-processed foods. We used Kappa statistics and intra-class correlation coefficients to assess inter-rater and test-retest reliabilities in samples of 142 restaurants, 97 retail food stores (including open-air food markets), and of 62 restaurants and 45 retail food stores (including open-air food markets), respectively. Construct validity as the tool’s abilities to discriminate based on store types and different income contexts were assessed in the entire sample: 305 retail food stores, 8 fruits and vegetable markets, and 472 restaurants. RESULTS Inter-rater and test-retest reliability were generally high, with most Kappa values greater than 0.70 (range 0.49-1.00). Both tools discriminated between store types and neighborhoods with different median income. Fruits and vegetables were more likely to be found in middle to higher-income neighborhoods, while soda, fruit-flavored drink mixes, cookies, and chips were cheaper and more likely to be found in lower-income neighborhoods. CONCLUSIONS The measures were reliable and able to reveal significant differences across store types and different contexts. Although some items may require revision, results suggest that the tools may be used to reliably measure the food stores and restaurant food environment in urban settings of middle-income countries. Such studies can help .inform health promotion interventions and policies in these contexts. PMID:26538101

Can a virtual supermarket bring realism into the lab? Comparing shopping behavior using virtual and pictorial store representations to behavior in a physical store.

PubMed

van Herpen, Erica; van den Broek, Eva; van Trijp, Hans C M; Yu, Tian

2016-12-01

Immersive virtual reality techniques present new opportunities for research into consumer behavior. The current study examines whether the increased realism of a virtual store compared to pictorial (2D) stimuli elicits consumer behavior that is more in line with behavior in a physical store. We examine the number, variety, and type of products selected, amount of money spent, and responses to price promotions and shelf display, in three product categories (fruit & vegetables, milk, and biscuits). We find that virtual reality elicits behavior that is more similar to behavior in the physical store compared to the picture condition for the number of products selected (Milk: M store  = 1.19, M virtual  = 1.53, M pictures  = 2.58) and amount of money spent (Milk: M store  = 1.27, M virtual  = 1.53, M pictures  = 2.60 Euro), and for the selection of products from different areas of the shelf, both vertically (purchases from top shelves, milk and biscuits: P store  = 21.6%, P virtual  = 33.4%, P pictures  = 50.0%) and horizontally (purchase from left shelf, biscuits: P store  = 35.5%, P virtual  = 53.3%, P pictures  = 66.7%). This indicates that virtual reality can improve realism in responses to shelf allocation. Virtual reality was not able to diminish other differences between lab and physical store: participants bought more products and spent more money (for biscuits and fruit & vegetables), bought more national brands, and responded more strongly to price promotions in both virtual reality and pictorial representations than in the physical store. Implications for the use of virtual reality in studies of consumer food choice behavior as well as for future improvement of virtual reality techniques are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Store type and demographic influence on the availability and price of healthful foods, Leon County, Florida, 2008.

PubMed

Leone, Angela F; Rigby, Samantha; Betterley, Connie; Park, Sohyun; Kurtz, Hilda; Johnson, Mary Ann; Lee, Jung Sun

2011-11-01

The availability of healthful foods varies by neighborhood. We examined the availability and price of more healthful foods by store type, neighborhood income level, and racial composition in a community with high rates of diet-related illness and death. We used the modified Nutrition Environment Measures Survey in Stores to conduct this cross-sectional study in 2008. We surveyed 73 stores (29% supermarkets, 11% grocery stores, and 60% convenience stores) in Leon County, Florida. We analyzed the price and availability of foods defined by the 2005 Dietary Guidelines for Americans as "food groups to encourage." We used descriptive statistics, t tests, analysis of variance, and χ(2) tests in the analysis. Measures of availability for all more healthful foods differed by store type (P < .001). Overall, supermarkets provided the lowest price for most fresh fruits and vegetables, low-fat milk, and whole-wheat bread. Availability of 10 of the 20 fruits and vegetables surveyed, shelf space devoted to low-fat milk, and varieties of whole-wheat bread differed by neighborhood income level (P < .05), but no trends were seen for the availability or price of more healthful foods by neighborhood racial composition. Store type affects the availability and price of more healthful foods. In particular, people without access to supermarkets may have limited ability to purchase healthful foods. Nutrition environment studies such as this one can be used to encourage improvements in neighborhoods that lack adequate access to affordable, healthful food, such as advocating for large retail stores, farmer's markets, and community gardens in disadvantaged neighborhoods.

What is the effectiveness of obesity related interventions at retail grocery stores and supermarkets? -a systematic review.

PubMed

Adam, Abdulfatah; Jensen, Jørgen D

2016-12-28

The Prevalence of obesity and overweight has been increasing in many countries. Many factors have been identified as contributing to obesity including the food environment, especially the access, availability and affordability of healthy foods in grocery stores and supermarkets. Several interventions have been carried out in retail grocery/supermarket settings as part of an effort to understand and influence consumption of healthful foods. The review's key outcome variable is sale/purchase of healthy foods as a result of the interventions. This systematic review sheds light on the effectiveness of food store interventions intended to promote the consumption of healthy foods and the methodological quality of studies reporting them. Systematic literature search spanning from 2003 to 2015 (inclusive both years), and confined to papers in the English language was conducted. Studies fulfilling search criteria were identified and critically appraised. Studies included in this review report health interventions at physical food stores including supermarkets and corner stores, and with outcome variable of adopting healthier food purchasing/consumption behavior. The methodological quality of all included articles has been determined using a validated 16-item quality assessment tool (QATSDD). The literature search identified 1580 publications, of which 42 met the inclusion criteria. Most interventions used a combination of information (e.g. awareness raising through food labeling, promotions, campaigns, etc.) and increasing availability of healthy foods such as fruits and vegetables. Few used price interventions. The average quality score for all papers is 65.0%, or an overall medium methodological quality. Apart from few studies, most studies reported that store interventions were effective in promoting purchase of healthy foods. Given the diverse study settings and despite the challenges of methodological quality for some papers, we find efficacy of in-store healthy food interventions in terms of increased purchase of healthy foods. Researchers need to take risk of bias and methodological quality into account when designing future studies that should guide policy makers. Interventions which combine price, information and easy access to and availability of healthy foods with interactive and engaging nutrition information, if carefully designed can help customers of food stores to buy and consume more healthy foods.

Preliminary subsystem designs for the Assured Crew Return Vehicle (ACRV)

NASA Technical Reports Server (NTRS)

1990-01-01

Described herein is a series of design studies concerning the Assured Crew Return Vehicle (ACRV). Study topics include a braking and landing system for the ACRV, ACRV growth options, and the design impacts of ACRV's role as a medical emergency vehicle. Four alternate designs are presented for the ACRV braking and landing system. Options presented include ballistic and lifting body reentries; the use of high-lift, high-payload aerodynamic decelerators, as well as conventional parachutes; landing systems designed for water landings, land landings or both; and an aerial recovery system. Uses of the ACRV or a similarly designed vehicle in several roles for possible future space missions are discussed, along with the required changes to the ACRV to allow it to perform these missions optimally. The impacts on the design of the ACRV due to its role as an emergency vehicle were studied and are presented here. This study included the design of a stretcher-like system to transport an ill or injured crewmember safely within the ACRV; a compilation of necessary medical equipment and decisions on how or where to store it; and recommendations about internal and external vehicle characteristics that will ease the transport of the ill or injured crewmember and allow for swift and easy ingress/egress of the vehicle.

Telerehabilitation store and forward applications: a review of applications and privacy considerations in physical and occupational therapy practice.

PubMed

Peterson, Christopher; Watzlaf, Valerie

2014-01-01

An overview of store and forward applications commonly used in physical and occupational therapy practice is reviewed with respect to regulation, privacy, security, and clinical applications. A privacy and security checklist provides a clear reference of pertinent regulatory issues regarding these software applications. A case study format is used to highlight clinical applications of store and forward software features. Important considerations of successful implementation of store and forward applications are also identified and discussed.

The role of glycogen, glucose and lactate in neuronal activity during hypoxia in the hooded seal (Cystophora cristata) brain.

PubMed

Czech-Damal, N U; Geiseler, S J; Hoff, M L M; Schliep, R; Ramirez, J-M; Folkow, L P; Burmester, T

2014-09-05

The brains of diving mammals are repeatedly exposed to hypoxic conditions during diving. Brain neurons of the hooded seal (Cystophora cristata) have been shown to be more hypoxia tolerant than those of mice, but the underlying mechanisms are not clear. Here we investigated the roles of different metabolic substrates for maintenance of neuronal activity and integrity, by comparing the in vitro spontaneous neuronal activity of brain slices from layer V of the visual cortex of hooded seals with those in mice (Mus musculus). Studies were conducted by manipulating the composition of the artificial cerebrospinal fluid (aCSF), containing either 10 mM glucose, or 20 mM lactate, or no external carbohydrate supply (aglycemia). Normoxic, hypoxic and ischemic conditions were applied. The lack of glucose or the application of lactate in the aCSF containing no glucose had little effect on the neuronal activity of seal neurons in either normoxia or hypoxia, while neurons from mice survived in hypoxia only few minutes regardless of the composition of the aCSF. We propose that seal neurons have higher intrinsic energy stores. Indeed, we found about three times higher glycogen stores in the seal brain (∼4.1 ng per μg total protein in the seal cerebrum) than in the mouse brain. Notably, in aCSF containing no glucose, seal neurons can tolerate 20 mM lactate while in mouse neuronal activity vanished after few minutes even in normoxia. This can be considered as an adaptation to long dives, during which lactate accumulates in the blood. Copyright © 2014 IBRO. Published by Elsevier Ltd. All rights reserved.

"Reality" of near-death-experience memories: evidence from a psychodynamic and electrophysiological integrated study.

PubMed

Palmieri, Arianna; Calvo, Vincenzo; Kleinbub, Johann R; Meconi, Federica; Marangoni, Matteo; Barilaro, Paolo; Broggio, Alice; Sambin, Marco; Sessa, Paola

2014-01-01

The nature of near-death-experiences (NDEs) is largely unknown but recent evidence suggests the intriguing possibility that NDEs may refer to actually "perceived," and stored, experiences (although not necessarily in relation to the external physical world). We adopted an integrated approach involving a hypnosis-based clinical protocol to improve recall and decrease memory inaccuracy together with electroencephalography (EEG) recording in order to investigate the characteristics of NDE memories and their neural markers compared to memories of both real and imagined events. We included 10 participants with NDEs, defined by the Greyson NDE scale, and 10 control subjects without NDE. Memories were assessed using the Memory Characteristics Questionnaire. Our hypnosis-based protocol increased the amount of details in the recall of all kind of memories considered (NDE, real, and imagined events). Findings showed that NDE memories were similar to real memories in terms of detail richness, self-referential, and emotional information. Moreover, NDE memories were significantly different from memories of imagined events. The pattern of EEG results indicated that real memory recall was positively associated with two memory-related frequency bands, i.e., high alpha and gamma. NDE memories were linked with theta band, a well-known marker of episodic memory. The recall of NDE memories was also related to delta band, which indexes processes such as the recollection of the past, as well as trance states, hallucinations, and other related portals to transpersonal experience. It is notable that the EEG pattern of correlations for NDE memory recall differed from the pattern for memories of imagined events. In conclusion, our findings suggest that, at a phenomenological level, NDE memories cannot be considered equivalent to imagined memories, and at a neural level, NDE memories are stored as episodic memories of events experienced in a peculiar state of consciousness.

Time, trust, and transparency: Lessons learned from collecting blood biospecimens for cancer research from the Asian American community.

PubMed

Dang, Julie H T; Chen, Moon S

2018-04-01

Biospecimens from racially diverse groups are needed to advance cancer research. The Asian American Cancer Education Study was developed to increase the number and proportion of blood biospecimen donations from Asian Americans for cancer research. The authors' targeted approach included 2 types of community engagement, in-reach (within institution to Asian American patients with cancer) and outreach (external to institution to the general Asian American community). Participants received in-language biospecimen education followed by the opportunity to donate blood biospecimens. Outreach participants donated through our community biospecimen blood drives, and in-reach participants consented to donating an extra tube of blood during their routine blood draws as a patient. Donated blood biospecimens were spun down to serum and plasma to be stored in a biorepository or were sent to the laboratory to test for cancer-related risk factors. Three hundred eighty-eight Asian Americans donated 1127 blood biospecimens for cancer research. Four hundred twenty tubes of plasma and serum are currently being stored at the cancer center's biorepository, 39 tubes have been used for cancer genomic research, and 668 tubes were used to characterize cancer-related risk factors. Building upon the past decade of the National Cancer Institute-funded Asian American Network for Cancer Awareness, Research, and Training's foundation of trust and service among Asian Americans, researchers were able to leverage relationships not only to introduce the idea of biospecimen contribution to the community but to also exceed expectations with regard to the quantity of blood biospecimens collected from Asian Americans. Cancer 2018;124:1614-21. © 2018 American Cancer Society. © 2018 American Cancer Society.

External access to ALICE controls conditions data

NASA Astrophysics Data System (ADS)

Jadlovský, J.; Jadlovská, A.; Sarnovský, J.; Jajčišin, Š.; Čopík, M.; Jadlovská, S.; Papcun, P.; Bielek, R.; Čerkala, J.; Kopčík, M.; Chochula, P.; Augustinus, A.

2014-06-01

ALICE Controls data produced by commercial SCADA system WINCCOA is stored in ORACLE database on the private experiment network. The SCADA system allows for basic access and processing of the historical data. More advanced analysis requires tools like ROOT and needs therefore a separate access method to the archives. The present scenario expects that detector experts create simple WINCCOA scripts, which retrieves and stores data in a form usable for further studies. This relatively simple procedure generates a lot of administrative overhead - users have to request the data, experts needed to run the script, the results have to be exported outside of the experiment network. The new mechanism profits from database replica, which is running on the CERN campus network. Access to this database is not restricted and there is no risk of generating a heavy load affecting the operation of the experiment. The developed tools presented in this paper allow for access to this data. The users can use web-based tools to generate the requests, consisting of the data identifiers and period of time of interest. The administrators maintain full control over the data - an authorization and authentication mechanism helps to assign privileges to selected users and restrict access to certain groups of data. Advanced caching mechanism allows the user to profit from the presence of already processed data sets. This feature significantly reduces the time required for debugging as the retrieval of raw data can last tens of minutes. A highly configurable client allows for information retrieval bypassing the interactive interface. This method is for example used by ALICE Offline to extract operational conditions after a run is completed. Last but not least, the software can be easily adopted to any underlying database structure and is therefore not limited to WINCCOA.