Tools for Asteroid Regolith Operations

NASA Technical Reports Server (NTRS)

Mueller, Robert P.; Calle, Carlos I.; Mantovani, James G.

2013-01-01

This RFI response is targeting Area 5. Crew Systems for Asteroid Exploration: concepts for lightweight and low volume robotic and extra-vehicular activity (EVA) systems, such as space suits, tools, translation aids, stowage containers, and other equipment.The NASA KSC Surface Systems Office, Granular Mechanics and Regolith Operations (GMRO) Lab and the Electrostatics Surface Physics Lab (ESPL) are dedicated to developing technologies for operating in regolith environments on target body surfaces. We have identified two technologies in our current portfolio that are highly relevant and useful for crews that will visit a re-directed asteroid in Cis-Lunar Space. Both technologies are at a high TRL of 56 and could be rapidly implemented in time for an ARM mission in this decade.

Electrochemical characterisation and anodic stripping voltammetry at mesoporous platinum rotating disc electrodes.

PubMed

Lozano-Sanchez, Pablo; Elliott, Joanne M

2008-02-01

Using the technique of liquid crystal templating a rotating disc electrode (RDE) was modified with a high surface area mesoporous platinum film. The surface area of the electrode was characterised by acid voltammetry, and found to be very high (ca. 86 cm(2)). Acid characterisation of the electrode produced distorted voltammograms was interpreted as being due to the extremely large surface area which produced a combination of effects such as localised pH change within the pore environment and also ohmic drop effects. Acid voltammetry in the presence of two different types of surfactant, namely Tween 20 and Triton X-100, suggested antifouling properties associated with the mesoporous deposit. Further analysis of the modified electrode using a redox couple in solution showed typical RDE behaviour although extra capacitive currents were observed due to the large surface area of the electrode. The phenomenon of underpotential deposition was exploited for the purpose of anodic stripping voltammetry and results were compared with data collected for microelectrodes. Underpotential deposition of metal ions at the mesoporous RDE was found to be similar to that at conventional platinum electrodes and mesoporous microelectrodes although the rate of surface coverage was found to be slower at a mesoporous RDE. It was found that a mesoporous RDE forms a suitable system for quantification of silver ions in solution.

7 CFR 51.300 - U.S. Extra Fancy.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Grades § 51.300 U.S. Extra Fancy. “U.S. Extra Fancy” consists of apples of one variety (except when more than one variety is printed on... apples are also free from injury caused by bruises, brown surface discoloration, smooth net-like...

7 CFR 51.300 - U.S. Extra Fancy.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Grades § 51.300 U.S. Extra Fancy. “U.S. Extra Fancy” consists of apples of one variety (except when more than one variety is printed on... apples are also free from injury caused by bruises, brown surface discoloration, smooth net-like...

Permeability predictions for sand-clogged Portland cement pervious concrete pavement systems.

PubMed

Haselbach, Liv M; Valavala, Srinivas; Montes, Felipe

2006-10-01

Pervious concrete is an alternative paving surface that can be used to reduce the nonpoint source pollution effects of stormwater runoff from paved surfaces such as roadways and parking lots by allowing some of the rainfall to permeate into the ground below. This infiltration rate may be adversely affected by clogging of the system, particularly clogging or covering by sand in coastal areas. A theoretical relation was developed between the effective permeability of a sand-clogged pervious concrete block, the permeability of sand, and the porosity of the unclogged block. Permeabilities were then measured for Portland cement pervious concrete systems fully covered with extra fine sand in a flume using simulated rainfalls. The experimental results correlated well with the theoretical calculated permeability of the pervious concrete system for pervious concrete systems fully covered on the surface with sand. Two different slopes (2% and 10%) were used. Rainfall rates were simulated for the combination of direct rainfall (passive runoff) and for additional stormwater runoff from adjacent areas (active runoff). A typical pervious concrete block will allow water to pass through at flow rates greater than 0.2 cm/s and a typical extra fine sand will have a permeability of approximately 0.02 cm/s. The limit of the system with complete sand coverage resulted in an effective system permeability of approximately 0.004 cm/s which is similar to the rainfall intensity of a 30 min duration, 100-year frequency event in the southeastern United States. The results obtained are important in designing and evaluating pervious concrete as a paving surface within watershed management systems for controlling the quantity of runoff.

Re-Conceptualizing Extra Help for High School Students in a High Standards Era.

ERIC Educational Resources Information Center

Balfanz, Robert; McPartland, James; Shaw, Alta

The push for higher academic standards has resulted in an increase in the numbers of high school students needing extra help. The need for extra help is most pervasive in high-poverty areas and most high school students need extra help not in traditional basic elementary skills but in reading, mathematics, and advanced reasoning skills. Most…

Comparison of Effects of a Proprioceptive Exercise Program in Water and on Land the Balance of Chronic Stroke Patients

PubMed Central

Han, Seul Ki; Kim, Myung Chul; An, Chang Sik

2013-01-01

[Purpose] The purpose of this study was to compare changes in balance ability of land exercise and underwater exercise on chronic stroke patients. [Subjects] A total of 60 patients received exercise for 40 minutes, three times a week, for 6 weeks. [Methods] Subjects from both groups performed general conventional treatment during the experimental period. In addition, all subjects engaged in extra treatment sessions. This extra treatment consisted of unstable surface exercise. The underwater exercise group used wonder boards in a pool (depth 1.1m, water temperature 33.5 °C, air temperature 27 °C) dedicated to underwater exercise, and the land exercise group used balance mats. [Result] The joint position sense, sway area, Berg Balance Scale showed significant improvements in both groups. However, the joint position sense test, sway area, and Berg Balance Scale showed there was more improvement in the underwater exercise group than in the land exercise group. [Conclusion] The results suggest that underwater exercise is more effective than land exercise at improving the joint position sense and balance of stroke patients. PMID:24259761

Comparison of effects of a proprioceptive exercise program in water and on land the balance of chronic stroke patients.

PubMed

Han, Seul Ki; Kim, Myung Chul; An, Chang Sik

2013-10-01

[Purpose] The purpose of this study was to compare changes in balance ability of land exercise and underwater exercise on chronic stroke patients. [Subjects] A total of 60 patients received exercise for 40 minutes, three times a week, for 6 weeks. [Methods] Subjects from both groups performed general conventional treatment during the experimental period. In addition, all subjects engaged in extra treatment sessions. This extra treatment consisted of unstable surface exercise. The underwater exercise group used wonder boards in a pool (depth 1.1m, water temperature 33.5 °C, air temperature 27 °C) dedicated to underwater exercise, and the land exercise group used balance mats. [Result] The joint position sense, sway area, Berg Balance Scale showed significant improvements in both groups. However, the joint position sense test, sway area, and Berg Balance Scale showed there was more improvement in the underwater exercise group than in the land exercise group. [Conclusion] The results suggest that underwater exercise is more effective than land exercise at improving the joint position sense and balance of stroke patients.

Crew Systems for Asteroid Exploration: Concepts for Lightweight & Low Volume EVA Systems

NASA Technical Reports Server (NTRS)

Mueller, Rob; Calle, Carlos; Mantovani, James

2013-01-01

This RFI response is targeting Area 5. Crew Systems for Asteroid Exploration: concepts for lightweight and low volume robotic and extra-vehicular activity (EVA) systems, such as space suits, tools, translation aids, stowage containers, and other equipment. The NASA KSC Surface Systems Office, Granular Mechanics and Regolith Operations (GMRO) Lab and the Electrostatics & Surface Physics Lab (ESPL) are dedicated to developing technologies for operating in regolith environments on target body surfaces. We have identified two technologies in our current portfolio that are highly relevant and useful for crews that will visit a re-directed asteroid in Cis-Lunar Space. Both technologies are at a high TRL of 5/6 and could be rapidly implemented in time for an ARM mission in this decade.

Minimizing the extra-oral time in autogeneous tooth transplantation: use of computer-aided rapid prototyping (CARP) as a duplicate model tooth.

PubMed

Lee, Seung-Jong; Kim, Euiseong

2012-08-01

The maintenance of the healthy periodontal ligament cells of the root surface of donor tooth and intimate surface contact between the donor tooth and the recipient bone are the key factors for successful tooth transplantation. In order to achieve these purposes, a duplicated donor tooth model can be utilized to reduce the extra-oral time using the computer-aided rapid prototyping (CARP) technique. Briefly, a three-dimensional digital imaging and communication in medicine (DICOM) image with the real dimensions of the donor tooth was obtained from a computed tomography (CT), and a life-sized resin tooth model was fabricated. Dimensional errors between real tooth, 3D CT image model and CARP model were calculated. And extra-oral time was recorded during the autotransplantation of the teeth. The average extra-oral time was 7 min 25 sec with the range of immediate to 25 min in cases which extra-oral root canal treatments were not performed while it was 9 min 15 sec when extra-oral root canal treatments were performed. The average radiographic distance between the root surface and the alveolar bone was 1.17 mm and 1.35 mm at mesial cervix and apex; they were 0.98 mm and 1.26 mm at the distal cervix and apex. When the dimensional errors between real tooth, 3D CT image model and CARP model were measured in cadavers, the average of absolute error was 0.291 mm between real teeth and CARP model. These data indicate that CARP may be of value in minimizing the extra-oral time and the gap between the donor tooth and the recipient alveolar bone in tooth transplantation.

Practitioners' Perceptions of the Soccer Extra-Time Period: Implications for Future Research.

PubMed

Harper, Liam D; Fothergill, Melissa; West, Daniel J; Stevenson, Emma; Russell, Mark

2016-01-01

Qualitative research investigating soccer practitioners' perceptions can allow researchers to create practical research investigations. The extra-time period of soccer is understudied compared to other areas of soccer research. Using an open-ended online survey containing eleven main and nine sub questions, we gathered the perceptions of extra-time from 46 soccer practitioners, all working for different professional soccer clubs. Questions related to current practices, views on extra-time regulations, and ideas for future research. Using inductive content analysis, the following general dimensions were identified: 'importance of extra-time', 'rule changes', 'efficacy of extra-time hydro-nutritional provision', 'nutritional timing', 'future research directions', 'preparatory modulations' and 'recovery'. The majority of practitioners (63%) either agreed or strongly agreed that extra-time is an important period for determining success in knockout football match-play. When asked if a fourth substitution should be permitted in extra-time, 67% agreed. The use of hydro-nutritional strategies prior to extra-time was predominately considered important or very important. However; only 41% of practitioners felt that it was the most important time point for the use of nutritional products. A similar number of practitioners account (50%) and do not (50%) account for the potential of extra-time when training and preparing players and 89% of practitioners stated that extra-time influences recovery practices following matches. In the five minute break prior to extra-time, the following practices (in order of priority) were advocated to players: hydration, energy provision, massage, and tactical preparations. Additionally, 87% of practitioners advocate a particular nutritional supplementation strategy prior to extra-time. In order of importance, practitioners see the following as future research areas: nutritional interventions, fatigue responses, acute injury risk, recovery modalities, training paradigms, injury epidemiology, and environmental considerations. This study presents novel insight into the practitioner perceptions of extra-time and provides information to readers about current applied practices and potential future research opportunities.

Practitioners' Perceptions of the Soccer Extra-Time Period: Implications for Future Research

PubMed Central

Harper, Liam D.; Fothergill, Melissa; West, Daniel J.; Stevenson, Emma; Russell, Mark

2016-01-01

Qualitative research investigating soccer practitioners’ perceptions can allow researchers to create practical research investigations. The extra-time period of soccer is understudied compared to other areas of soccer research. Using an open-ended online survey containing eleven main and nine sub questions, we gathered the perceptions of extra-time from 46 soccer practitioners, all working for different professional soccer clubs. Questions related to current practices, views on extra-time regulations, and ideas for future research. Using inductive content analysis, the following general dimensions were identified: ‘importance of extra-time’, ‘rule changes’, ‘efficacy of extra-time hydro-nutritional provision’, ‘nutritional timing’, ‘future research directions’, ‘preparatory modulations’ and ‘recovery’. The majority of practitioners (63%) either agreed or strongly agreed that extra-time is an important period for determining success in knockout football match-play. When asked if a fourth substitution should be permitted in extra-time, 67% agreed. The use of hydro-nutritional strategies prior to extra-time was predominately considered important or very important. However; only 41% of practitioners felt that it was the most important time point for the use of nutritional products. A similar number of practitioners account (50%) and do not (50%) account for the potential of extra-time when training and preparing players and 89% of practitioners stated that extra-time influences recovery practices following matches. In the five minute break prior to extra-time, the following practices (in order of priority) were advocated to players: hydration, energy provision, massage, and tactical preparations. Additionally, 87% of practitioners advocate a particular nutritional supplementation strategy prior to extra-time. In order of importance, practitioners see the following as future research areas: nutritional interventions, fatigue responses, acute injury risk, recovery modalities, training paradigms, injury epidemiology, and environmental considerations. This study presents novel insight into the practitioner perceptions of extra-time and provides information to readers about current applied practices and potential future research opportunities. PMID:27384693

Absorption spectroscopy and multi-angle scattering measurements in the visible spectral range for the geographic classification of Italian exravirgin olive oils

NASA Astrophysics Data System (ADS)

Mignani, Anna G.; Ciaccheri, Leonardo; Cimato, Antonio; Sani, Graziano; Smith, Peter R.

2004-03-01

Absorption spectroscopy and multi-angle scattering measurements in the visible spectral range are innovately used to analyze samples of extra virgin olive oils coming from selected areas of Tuscany, a famous Italian region for the production of extra virgin olive oil. The measured spectra are processed by means of the Principal Component Analysis method, so as to create a 3D map capable of clustering the Tuscan oils within the wider area of Italian extra virgin olive oils.

Dynamic Melting of Freezing Droplets on Ultraslippery Superhydrophobic Surfaces.

PubMed

Chu, Fuqiang; Wu, Xiaomin; Wang, Lingli

2017-03-08

Condensed droplet freezing and freezing droplet melting phenomena on the prepared ultraslippery superhydrophobic surface were observed and discussed in this study. Although the freezing delay performance of the surface is common, the melting of the freezing droplets on the surface is quite interesting. Three self-propelled movements of the melting droplets (ice- water mixture) were found including the droplet rotating, the droplet jumping, and the droplet sliding. The melting droplet rotating, which means that the melting droplet rotates spontaneously on the superhydrophobic surface like a spinning top, is first reported in this study and may have some potential applications in various engineering fields. The melting droplet jumping and sliding are similar to those occurring during condensation but have larger size scale and motion scale, as the melting droplets have extra-large specific surface area with much more surface energy available. These self-propelled movements make all the melting droplets on the superhydrophobic surface dynamic, easily removed, which may be promising for the anti-icing/frosting applications.

Synthesis and characterization of MOF-aminated graphite oxide composites for CO2 capture

NASA Astrophysics Data System (ADS)

Zhao, Yunxia; Ding, Huiling; Zhong, Qin

2013-11-01

A kind of metal-organic frameworks (MOF-5) and aminated graphite oxide (AGO) composites were prepared for CO2 capture to mitigate global warming. MOF-5, MOF-5/GO (composite of MOF-5 and graphite oxide) and MOF-5/AGO samples were characterized by X-ray powder diffraction (XRD), infrared spectroscopy (IR), scanning electron microscope (SEM), nitrogen adsorption as well as thermogravimetric analysis to figure out their chemistry and structure information. Three types of samples with suitable specific surface area and pore diameter were chosen to test CO2 adsorption performance and stability under humidity conditions. The results indicate that high surface area and pore volume, pore similar in size to the size of gas adsorbate, and extra reactive sites modified in the composites contributes to the high CO2 capacity. Besides, the composites involved by GO or AGO show better anti-moisture performance than the parent MOF.

Multifunctional Inflatable Structure Being Developed for the PowerSphere Concept

NASA Technical Reports Server (NTRS)

Peterson, Todd T.

2003-01-01

The continuing development of microsatellites and nanosatellites for low Earth orbits requires the collection of sufficient power for instruments onboard a low-weight, low-volume spacecraft. Because the overall surface area of a microsatellite or nanosatellite is small, body-mounted solar cells cannot provide enough power. The deployment of traditional, rigid, solar arrays necessitates larger satellite volumes and weights, and also requires extra apparatus for pointing. One solution to this power choke problem is the deployment of a spherical, inflatable power system. This power system, termed the "PowerSphere," has several advantages, including a high collection area, low weight and stowage volume, and the elimination of solar array pointing mechanisms.

Modelling gas dynamics in 1D ducts with abrupt area change

NASA Astrophysics Data System (ADS)

Menina, R.; Saurel, R.; Zereg, M.; Houas, L.

2011-09-01

Most gas dynamic computations in industrial ducts are done in one dimension with cross-section-averaged Euler equations. This poses a fundamental difficulty as soon as geometrical discontinuities are present. The momentum equation contains a non-conservative term involving a surface pressure integral, responsible for momentum loss. Definition of this integral is very difficult from a mathematical standpoint as the flow may contain other discontinuities (shocks, contact discontinuities). From a physical standpoint, geometrical discontinuities induce multidimensional vortices that modify the surface pressure integral. In the present paper, an improved 1D flow model is proposed. An extra energy (or entropy) equation is added to the Euler equations expressing the energy and turbulent pressure stored in the vortices generated by the abrupt area variation. The turbulent energy created by the flow-area change interaction is determined by a specific estimate of the surface pressure integral. Model's predictions are compared with 2D-averaged results from numerical solution of the Euler equations. Comparison with shock tube experiments is also presented. The new 1D-averaged model improves the conventional cross-section-averaged Euler equations and is able to reproduce the main flow features.

Effects of experimental light at night on extra-pair paternity in a songbird.

PubMed

de Jong, Maaike; Lamers, Koosje P; Eugster, Mark; Ouyang, Jenny Q; Da Silva, Arnaud; Mateman, A Christa; van Grunsven, Roy H A; Visser, Marcel E; Spoelstra, Kamiel

2018-06-27

Light pollution is increasing worldwide and significantly affects animal behavior. In birds, these effects include advancement of morning activity and onset of dawn song, which may affect extra-pair paternity. Advanced dawn song of males may stimulate females to engage in extra-pair copulations, and the earlier activity onset may affect the males' mate guarding behavior. Earlier work showed an effect of light at night on extra-pair behavior, but this was in an area with other anthropogenic disturbances. Here, we present a two-year experimental study on effects of light at night on extra-pair paternity of great tits (Parus major). Previously dark natural areas were illuminated with white, red, and green LED lamps and compared to a dark control. In 2014, the proportion of extra-pair young in broods increased with distance to the red and white lamps (i.e., at lower light intensities), but decreased with distance to the poles in the dark control. In 2013, we found no effects on the proportion of extra-pair young. The total number of offspring sired by a male was unaffected by artificial light at night in both years, suggesting that potential changes in female fidelity in pairs breeding close to white and red light did not translate into fitness benefits for the males of these pairs. Artificial light at night might disrupt the natural patterns of extra-pair paternity, possibly negates potential benefits of extra-pair copulations and thus could alter sexual selection processes in wild birds. © 2018 Wiley Periodicals, Inc.

Information Presentation

NASA Technical Reports Server (NTRS)

Holden, Kritina; Sandor, A.; Thompson, S. G.; McCann, R. S.; Kaiser, M. K.; Begault, D. R.; Adelstein, B. D.; Beutter, B. R.; Stone, L. S.

2008-01-01

The goal of the Information Presentation Directed Research Project (DRP) is to address design questions related to the presentation of information to the crew on flight vehicles, surface landers and habitats, and during extra-vehicular activities (EVA). Designers of displays and controls for exploration missions must be prepared to select the text formats, label styles, alarms, electronic procedure designs, and cursor control devices that provide for optimal crew performance on exploration tasks. The major areas of work, or subtasks, within the Information Presentation DRP are: 1) Controls, 2) Displays, 3) Procedures, and 4) EVA Operations.

Evolutionary origin of the latitudinal diversity gradient in liverworts.

PubMed

Laenen, Benjamin; Patiño, Jairo; Hagborg, Anders; Désamoré, Aurélie; Wang, Jian; Jonathan Shaw, A; Goffinet, Bernard; Vanderpoorten, Alain

2018-06-08

A latitudinal diversity gradient towards the tropics appears as one most recurrent patterns in ecology, but the mechanisms underlying this pattern remain an area of controversy. In angiosperms, the tropical conservatism hypothesis proposes that most groups originated in the tropics and are adapted to a tropical climatic regime, and that relatively few species have evolved physiological adaptations to cold, dry or unpredictable climates. This mechanism is, however, unlikely to apply across land plants, and in particular, to liverworts, a group of about 7500 species, whose ability to withstand cold much better than their tracheophyte counterparts is at odds with the tropical conservatism hypothesis. Molecular dating, diversification rate analyses and ancestral area reconstructions were employed to explore the evolutionary mechanisms that account for the latitudinal diversity gradient in liverworts. As opposed to angiosperms, tropical liverwort genera are not older than their extra-tropical counterparts (median stem age of tropical and extra-tropical liverwort genera of 24.35±39.65 Ma and 39.57±49.07 Ma, respectively), weakening the 'time for speciation hypothesis'. Models of ancestral area reconstructions with equal migration rates between tropical and extra-tropical regions outperformed models with asymmetrical migration rates in either direction. The symmetry and intensity of migrations between tropical and extra-tropical regions suggested by the lack of resolution in ancestral area reconstructions towards the deepest nodes are at odds with the tropical niche conservatism hypothesis. In turn, tropical genera exhibited significantly higher net diversification rates than extra-tropical ones, suggesting that the observed latitudinal diversity gradient results from either higher extinction rates in extra-tropical lineages or higher speciation rates in the tropics. We discuss a series of experiments to help deciphering the underlying evolutionary mechanisms. Copyright © 2018. Published by Elsevier Inc.

Effects of delayed finishing/polishing on surface roughness, hardness and gloss of tooth-coloured restorative materials.

PubMed

Yazici, A Ruya; Tuncer, Duygu; Antonson, Sibel; Onen, Alev; Kilinc, Evren

2010-01-01

The aim of this study was to investigate the effect of delayed finishing/polishing on the surface roughness, hardness and gloss of tooth-coloured restorative materials. Four different tooth-coloured restoratives: a flowable resin composite- Tetric Flow, a hybrid resin composite- Venus, a nanohybrid resin composite- Grandio, and a polyacid modified resin composite- Dyract Extra were used. 30 specimens were made for each material and randomly assigned into three groups. The first group was finished/polished immediately and the second group was finished/polished after 24 hours. The remaining 10 specimens served as control. The surface roughness of each sample was recorded using a laser profilometer. Gloss measurements were performed using a small-area glossmeter. Vickers microhardness measurements were performed from three locations on each specimen surface under 100g load and 10s dwell time. Data for surface roughness and hardness were analyzed by Kruskal Wallis test and data for gloss were subjected to one-way ANOVA and Tukey test (P <.05). The smoothest surfaces were obtained under Mylar strip for all materials. While there were no significant differences in surface roughness of immediate and delayed finished/polished Dyract Extra samples, immediately finished/polished Venus and Grandio samples showed significantly higher roughness than the delayed polished samples (P <.05). In Tetric Flow samples, immediately finishing/polishing provided smoother surface than delayed finishing/polishing (P <.05). The highest gloss values were recorded under Mylar strip for all materials. While delayed finishing/polishing resulted in a significantly higher gloss compared to immediate finishing/polishing in Venus samples (P <.05), no differences were observed between delayed or immediate finishing/polishing for the other materials (P>.05). The lowest hardness values were found under Mylar strip. Delayed finishing/polishing significantly increased the hardness of all materials. The effect of delayed finishing/polishing on surface roughness, gloss and hardness appears to be material dependent.

Modeling Surface Roughness to Estimate Surface Moisture Using Radarsat-2 Quad Polarimetric SAR Data

NASA Astrophysics Data System (ADS)

Nurtyawan, R.; Saepuloh, A.; Budiharto, A.; Wikantika, K.

2016-08-01

Microwave backscattering from the earth's surface depends on several parameters such as surface roughness and dielectric constant of surface materials. The two parameters related to water content and porosity are crucial for estimating soil moisture. The soil moisture is an important parameter for ecological study and also a factor to maintain energy balance of land surface and atmosphere. Direct roughness measurements to a large area require extra time and cost. Heterogeneity roughness scale for some applications such as hydrology, climate, and ecology is a problem which could lead to inaccuracies of modeling. In this study, we modeled surface roughness using Radasat-2 quad Polarimetric Synthetic Aperture Radar (PolSAR) data. The statistical approaches to field roughness measurements were used to generate an appropriate roughness model. This modeling uses a physical SAR approach to predicts radar backscattering coefficient in the parameter of radar configuration (wavelength, polarization, and incidence angle) and soil parameters (surface roughness and dielectric constant). Surface roughness value is calculated using a modified Campbell and Shepard model in 1996. The modification was applied by incorporating the backscattering coefficient (σ°) of quad polarization HH, HV and VV. To obtain empirical surface roughness model from SAR backscattering intensity, we used forty-five sample points from field roughness measurements. We selected paddy field in Indramayu district, West Java, Indonesia as the study area. This area was selected due to intensive decreasing of rice productivity in the Northern Coast region of West Java. Third degree polynomial is the most suitable data fitting with coefficient of determination R2 and RMSE are about 0.82 and 1.18 cm, respectively. Therefore, this model is used as basis to generate the map of surface roughness.

Tubular copper thrust chamber design study

NASA Technical Reports Server (NTRS)

Masters, A. I.; Galler, D. E.

1992-01-01

The use of copper tubular thrust chambers is particularly important in high performance expander cycle space engines. Tubular chambers have more surface area than flat wall chambers, and this extra surface area provides enhanced heat transfer for additional energy to power the cycle. This paper was divided into two sections: (1) a thermal analysis and sensitivity study; and (2) a preliminary design of a selected thrust chamber configuration. The thermal analysis consisted of a statistical optimization to determine the optimum tube geometry, tube booking, thrust chamber geometry, and cooling routing to achieve the maximum upper limit chamber pressure for a 25,000 pound thrust engine. The preliminary design effort produced a layout drawing of a tubular thrust chamber that is three inches shorter than the Advanced Expander Test Bed (AETB) milled channel chamber but is predicted to provide a five percent increase in heat transfer. Testing this chamber in the AETB would confirm the inherent advantages of tubular chamber construction and heat transfer.

Phi Delta Kappa Viewpoint.

ERIC Educational Resources Information Center

Phi Delta Kappa, Trenton, NJ. Trenton Area Chapter.

This collection of articles on aspects of educational research, service, and leadership, are all written by members the Trenton (New Jersey) Area Chapter of Phi Delta Kappa. "Extra Year Programs: The K-1 Transition," by Richard Graja, reports on a study of 210 families regarding the Extra Year program, an opportunity for children to…

Effect of Diamond Bur Grit Size on Composite Repair.

PubMed

Valente, Lisia L; Silva, Manuela F; Fonseca, Andrea S; Münchow, Eliseu A; Isolan, Cristina P; Moraes, Rafael R

2015-06-01

This study investigated the effect of diamond bur grit size on the repair bond strength of fresh and aged resin composites. Blocks of microhybrid composite (Opallis, FGM) were stored in distilled water at 37°C for 24 h (fresh composite) or subjected to 5000 thermal cycles (aged composite). The surfaces were roughened using diamond-coated, flame-shaped carbide burs with medium grit (#3168), fine grit (#3168F), or extra-fine grit (#3168FF). The control group underwent no surface treatment. Surface roughness, water contact angle, and surface topography by scanning electron microscopy (SEM) were evaluated (n = 3). Samples were restored with resin composite and sectioned into beam-shaped specimens, which were subjected to microtensile bond testing. Failure modes were classified using a stereomicroscope. Data were statistically analyzed using the Student- Newman-Keuls test and two-way ANOVA, with significance set at p < 0.05. Higher surface roughness was observed for groups treated with the medium- and fine-grit burs; aged composites were rougher than fresh composites. The water contact angle formed on the aged composite was lower than that on the fresh composite. The highest repair bond strength was observed for the fine-grit bur group, and the lowest was recorded for control. Interfacial failures were more predominant. SEM images showed that the surfaces treated with fine- and extra-fine-grit burs had a more irregular topography. Surface roughening of fresh or aged resin composites with diamond burs improved retention of the repair material. Fine-grit burs generally performed better than medium- and extra-fine-grit burs.

The AMIGA enhancement of the Pierre Auger Observatory

NASA Astrophysics Data System (ADS)

Maldera, S.

2014-06-01

The AMIGA (Auger Muons and Infill for the Ground Array) enhancement of the Auger Surface Detector consists of a 23.5 km2 infill area instrumented with water-Cherenkov detector stations accompanied by 30 m2 of scintillator counters, buried 2.3 m underground. The spacing of 750 m between the surface detectors extends the energy range as low as 3 × 1017 eV, thus allowing the study of the energy region where the transition between galactic and extra-galactic cosmic rays is expected to take place. We describe the reconstruction of the events observed with the infill water-Cherenkov detector array and the derived energy spectrum. We also discuss the basic properties of the muon detector modules obtained from measurements and tests during the construction phase and from the first data in the field.

CANAL EMERGES FROM EAST SIDE OF MTR BUILDING. "EXTRA" LENGTH ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

CANAL EMERGES FROM EAST SIDE OF MTR BUILDING. "EXTRA" LENGTH WAS TO STORE SPENT FUEL THAT WOULD ACCUMULATE BEFORE THE CHEMICAL PROCESSING PLANT WAS READY TO PROCESS IT. INL NEGATIVE NO. 1659. Unknown Photographer, 3/9/1951 - Idaho National Engineering Laboratory, Test Reactor Area, Materials & Engineering Test Reactors, Scoville, Butte County, ID

Possible Existence of Extra-Terrestrial Technology in the Solar System

NASA Astrophysics Data System (ADS)

Burke-Ward, R.

Potential features of the design and function of extra-terrestrial probes are discussed with the aim of establishing criteria for search, detection and contact. Probes are categorised according to three primary areas of function - data-gathering, direct action, and sentient entities. Conclusions are drawn about possible probe technologies and modes of behaviour.

Extra Dimensions of Space: Are They Going to be Found Soon?

ScienceCinema

Rubakov, Valery [Institute for Nuclear Research, Moscow, Russia

2017-12-09

Our space may well have more than 3 dimensions. Indeed, theories that pretend to be most fundamental choose to live in higher dimensions: a natural area for superstring/Mtheory is 9- or 10-dimensional space. Extra dimensions have been hidden so far, but they would open up above a certain energy threshold. A fascinating possibility is that this happens within reach of particle colliders. This lecture will address the motivation for such a viewpoint and implications of accessible extra dimensions for our understanding of nature.

Light up the "no-man's land" on the brain stem.

PubMed

Kawase, T

1995-12-01

The ventral surface of the brain stem is anatomically surrounded by the clivus anteriorly, brain stem posteriorly and by the petrous pyramid and cranial nerves from IIIrd to XIIth laterally in the deep posterior cranial fossa. Neurosurgical extra-axial pathologies arising from the area are aneurysms on the vertebro-basilar artery, benign tumors such as clival meningiomas, chordomas, chondromas, trigeminal neurinomas and prepontine epidermoid tumors. Surgical access to the area had been difficult for long years since the neurosurgery was established, because located deeply in such a surgical blindness, so-called "no-man's land". However, recent technical development of "skull base surgery" is opening new doors to light up the surgical darkness of the "no-man's land". This paper reviews the history, development, technique and future prospect of the skull base surgery to open the "no-man's land".

SAR Image Simulation of Ship Targets Based on Multi-Path Scattering

NASA Astrophysics Data System (ADS)

Guo, Y.; Wang, H.; Ma, H.; Li, K.; Xia, Z.; Hao, Y.; Guo, H.; Shi, H.; Liao, X.; Yue, H.

2018-04-01

Synthetic Aperture Radar (SAR) plays an important role in the classification and recognition of ship targets because of its all-weather working ability and fine resolution. In SAR images, besides the sea clutter, the influence of the sea surface on the radar echo is also known as the so-called multipath effect. These multipath effects will generate some extra "pseudo images", which may cause the distortion of the target image and affect the estimation of the characteristic parameters. In this paper,the multipath effect of rough sea surface and its influence on the estimation of ship characteristic parameters are studied. The imaging of the first and the secondary reflection of sea surface is presented . The artifacts not only overlap with the image of the target itself, but may also appear in the sea near the target area. It is difficult to distinguish them, and this artifact has an effect on the length and width of the ship.

Regolith Advanced Surface Systems Operations Robot (RASSOR)

NASA Technical Reports Server (NTRS)

Mueller, Robert P.; Smith, Jonathan D.; Cox, Rachel E.; Schuler, Jason M.; Ebert, Tom; Nick, Andrew J.

2012-01-01

Regolith is abundant on extra-terrestrial surfaces and is the source of many resources such as oxygen, hydrogen, titanium, aluminum, iron, silica and other valuable materials, which can be used to make rocket propellant, consumables for life support, radiation protection barrier shields, landing pads, blast protection berms, roads, habitats and other structures and devices. Recent data from the Moon also indicates that there are substantial deposits of water ice in permanently shadowed crater regions and possibly under an over burden of regolith. The key to being able to use this regolith and acquire the resources, is being able to manipulate it with robotic excavation and hauling machinery that can survive and operate in these very extreme extra-terrestrial surface environments. In addition, the reduced gravity on the Moon, Mars, comets and asteroids poses a significant challenge in that the necessary reaction force for digging cannot be provided by the robot's weight as is typically done on Earth. Space transportation is expensive and limited in capacity, so small, lightweight payloads are desirable, which means large traditional excavation machines are not a viable option. A novel, compact and lightweight excavation robot prototype for manipulating, excavating, acquiring, hauling and dumping regolith on extra-terrestrial surfaces has been developed and tested. Lessons learned and test results will be presented including digging in a variety of lunar regolith simulant conditions including frozen regolith mixed with water ice.

Economic Education and Student Performance in the Business Discipline: Implications for Curriculum Planning

ERIC Educational Resources Information Center

Islam, Muhammad M.; Islam, Faridul

2013-01-01

The authors conducted an empirical examination of the relationship between extra-normal ability (inability) in principles of economics courses and student performance in the various areas of the business discipline such as finance, marketing, management, and accounting. Extra-normal ability is defined as the part of an economics grade that cannot…

Flow rate limitation in open wedge channel under microgravity

NASA Astrophysics Data System (ADS)

Wei, YueXing; Chen, XiaoQian; Huang, YiYong

2013-08-01

A study of flow rate limitation in an open wedge channel is reported in this paper. Under microgravity condition, the flow is controlled by the convection and the viscosity in the channel as well as the curvature of the liquid free surface. A maximum flow rate is achieved when the curvature cannot balance the pressure difference leading to a collapse of the free surface. A 1-dimensional theoretical model is used to predict the critical flow rate and calculate the shape of the free surface. Computational Fluid Dynamics tool is also used to simulate the phenomenon. Results show that the 1-dimensional model overestimates the critical flow rate because extra pressure loss is not included in the governing equation. Good agreement is found in 3-dimensional simulation results. Parametric study with different wedge angles and channel lengths show that the critical flow rate increases with increasing the cross section area; and decreases with increasing the channel length. The work in this paper can help understand the surface collapsing without gravity and for the design in propellant management devices in satellite tanks.

Long-term effects of grazing and topography on extra-radical hyphae of arbuscular mycorrhizal fungi in semi-arid grasslands.

PubMed

Ren, Haiyan; Gui, Weiyang; Bai, Yongfei; Stein, Claudia; Rodrigues, Jorge L M; Wilson, Gail W T; Cobb, Adam B; Zhang, Yingjun; Yang, Gaowen

2018-02-01

Grazing and topography have drastic effects on plant communities and soil properties. These effects are thought to influence arbuscular mycorrhizal (AM) fungi. However, the simultaneous impacts of grazing pressure (sheep ha -1 ) and topography on plant and soil factors and their relationship to the production of extra-radical AM hyphae are not well understood. Our 10-year study assessed relationships between grazing, plant species richness, aboveground plant productivity, soil nutrients, edaphic properties, and AM hyphal length density (HLD) in different topographic areas (flat or sloped). We found HLD linearly declined with increasing grazing pressure (1.5-9.0 sheep ha -1 ) in sloped areas, but HLD was greatest at moderate grazing pressure (4.5 sheep ha -1 ) in flat areas. Structural equation modeling indicates grazing reduces HLD by altering soil nutrient dynamics in sloped areas, but non-linearly influences HLD through plant community and edaphic changes in flat areas. Our findings highlight how topography influences key plant and soil factors, thus regulating the effects of grazing pressure on extra-radical hyphal production of AM fungi in grasslands. Understanding how grazing and topography influence AM fungi in semi-arid grasslands is vital, as globally, severe human population pressure and increasing demand for food aggravate the grazing intensity in grasslands.

Super-oxidation of silicon nanoclusters: magnetism and reactive oxygen species at the surface

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lepeshkin, Sergey; Baturin, Vladimir; Tikhonov, Evgeny

2016-01-01

Oxidation of silicon nanoclusters depending on the temperature and oxygen pressure is explored from first principles using the evolutionary algorithm, and structural and thermodynamic analysis. From our calculations of 90 SinOm clusters we found that under normal conditions oxidation does not stop at the stoichiometric SiO2 composition, as it does in bulk silicon, but goes further placing extra oxygen atoms on the cluster surface. These extra atoms are responsible for light emission, relevant to reactive oxygen species and many of them are magnetic. We argue that the super-oxidation effect is size-independent and discuss its relevance to nanotechnology and miscellaneous applications,more » including biomedical ones.« less

[Extra skeletal Ewing's sarcoma. Report of two cases. Ultrastructural study of one case (author's transl)].

PubMed

Krulik, M; Brechot, J M; de Saint-Maur, P; Lecomte, D; Mougeot-Martin, M; Audebert, A A; Zylberait, D; Debray, J

The authors report two cases of extra skeletal Ewing's sarcoma. The first case concerns a 26 years old woman presenting a tumor at the level of the sacrum area, locally recurrent, metastazing to the lungs and the lumbar column, despite of radiotherapy and chemotherapy and leading to death after a course of 18 months. The second one is that of a 30 years old man bearing a tumor of the shoulder area probably already metastazed to bones, rapidly recurrent and metastazing to the lungs and cause of death after 9 months in spite of intensive therapy. About these 2 observations a review of the literature of the cases of extra skeletal Ewing's sarcoma is done. Whatever nosologic discussion it seems that Ewing's sarcoma may present essentially as a tumor of soft tissues. An ultrastructural study has been performed in the second case. The findings are similar to those reported in Ewing's sarcoma.

Combination of complementary data mining methods for geographical characterization of extra virgin olive oils based on mineral composition.

PubMed

Sayago, Ana; González-Domínguez, Raúl; Beltrán, Rafael; Fernández-Recamales, Ángeles

2018-09-30

This work explores the potential of multi-element fingerprinting in combination with advanced data mining strategies to assess the geographical origin of extra virgin olive oil samples. For this purpose, the concentrations of 55 elements were determined in 125 oil samples from multiple Spanish geographic areas. Several unsupervised and supervised multivariate statistical techniques were used to build classification models and investigate the relationship between mineral composition of olive oils and their provenance. Results showed that Spanish extra virgin olive oils exhibit characteristic element profiles, which can be differentiated on the basis of their origin in accordance with three geographical areas: Atlantic coast (Huelva province), Mediterranean coast and inland regions. Furthermore, statistical modelling yielded high sensitivity and specificity, principally when random forest and support vector machines were employed, thus demonstrating the utility of these techniques in food traceability and authenticity research. Copyright © 2018 Elsevier Ltd. All rights reserved.

Surface-enhanced Raman scattering from graphene covered gold nanocap arrays

NASA Astrophysics Data System (ADS)

Long, Kailin; Luo, Xiaoguang; Nan, Haiyan; Du, Deyang; Zhao, Weiwei; Ni, Zhenhua; Qiu, Teng

2013-11-01

This work reports an efficient method to fabricate large-area flexible substrates for surface enhanced Raman scattering (SERS) application. Our technique is based on a single-step direct imprint process via porous anodic alumina stamps. Periodic hexagonal arrangements of porous anodic alumina stamps are transferred to the polyethylene terephthalate substrates by mechanically printing process. Printed nanocaps will turn into "hot spots" for electromagnetic enhancement with a deposited gold film by high vacuum evaporation. The gaps between the nanocaps are controllable with a tight correspondence to the thickness of the deposited gold, which dramatically influence the enhancement factor. After covered with a single-layer graphene sheet, the gold nanocap substrate can be further optimized with an extra enhancement of Raman signals, and it is available for the trace detection of probe molecules. This convenient, simple, and low-cost method of making flexible SERS-active substrates potentially opens a way towards biochemical analysis and disease detection.

Enhancement in surface area and magnetization of CoFe2O4 nanoparticles for targeted drug delivery application

NASA Astrophysics Data System (ADS)

Kale, Swati B.; Somvanshi, Sandeep B.; Sarnaik, M. N.; More, S. D.; Shukla, S. J.; Jadhav, K. M.

2018-05-01

This paper reports facile synthesis, characterizations by X-ray diffraction and scanning electron microscopy and magnetic behaviour of cobalt ferrite nanoparticles. Cobalt ferrite nanoparticles were prepared by sol-gel auto combustion technique using glycine as a fuel. Phase purity and nanocrystalline nature of the prepared sample was confirmed through X-ray diffraction technique. No extra peak other than cubic spinel structure was observed in the XRD pattern. The crystallite size calculated by using Scherrer's formula is of the order of 21.6 nm indicating the nanocrystalline nature of the prepared cobalt ferrite sample. The surface morphological studies were carried out using scanning electron microscope (SEM). SEM image shows homogeneous, agglomerated particles with sponge-like form. The saturation magnetization, coercivity and remenance magnetization obtained by hysteresis curve clearly gives the evidence of excellent and enhanced magnetic behaviour.

Microwave Sinterator Freeform Additive Construction System (MS-FACS)

NASA Technical Reports Server (NTRS)

Howe, Alan S.; Wilcox, Brian H.; Barmatz, Martin B.; Mercury, Michael B.; Siebert, Michael A.; Rieber, Richard R.

2013-01-01

The harmful properties of lunar dust, such as small size, glass composition, abnormal surface area, and coatings of imbedded nanophase iron, lead to a unique coupling of the dust with microwave radiation. This coupling can be exploited for rapid sintering of lunar soil for use as a construction material that can be formed to take on an infinite number of shapes and sizes. This work describes a system concept for building structures on the lunar surface using lunar regolith (soil). This system uses the ATHLETE (All-Terrain Hex- Limbed Extra-Terrestrial Explorer) mobility system as a positioning system with a microwave print head (similar to that of a smaller-scale 3D printer). A processing system delivers the lunar regolith to the microwave print head, where the microwave print head/chamber lays down a layer of melted regolith. An arm on the ATHLETE system positions the layer depending on the desired structure.

Toward RADSCAT measurements over the sea and their interpretation

NASA Technical Reports Server (NTRS)

Claassen, J. P.; Fung, A. K.; Wu, S. T.; Chan, H. L.

1973-01-01

Investigations into several areas which are essential to the execution and interpretation of suborbital observations by composite radiometer - scatterometer sensor (RADSCAT) are reported. Experiments and theory were developed to demonstrate the remote anemometric capability of the sensor over the sea through various weather conditions. It is shown that weather situations found in extra tropical cyclones are useful for demonstrating the all weather capability of the composite sensor. The large scale fluctuations of the wind over the sea dictate the observational coverage required to correlate measurements with the mean surface wind speed. Various theoretical investigations were performed to establish a premise for the joint interpretation of the experiment data. The effects of clouds and rains on downward radiometric observations over the sea were computed. A method of predicting atmospheric attenuation from joint observations is developed. In other theoretical efforts, the emission and scattering characteristics of the sea were derived. Composite surface theories with coherent and noncoherent assumptions were employed.

Supra-Earth affairs.

PubMed

Othman, Mazlan

2011-02-13

The United Nations briefly considered the issue of extra-terrestrial intelligence at the 32nd session of the General Assembly in 1977. As a result, the Office of Outer Space Affairs was tasked to prepare a document on issues related to 'messages to extra-terrestrial civilizations', but this area has not been followed through in more recent times. This discussion paper describes the United Nations' activities in the field of near-Earth objects in some detail, and suggests that this might be used as a model of how Member States could proceed with dealing with this issue in case the existence of extra-terrestrial life/intelligence is established.

Determination of important topographic factors for landslide mapping analysis using MLP network.

PubMed

Alkhasawneh, Mutasem Sh; Ngah, Umi Kalthum; Tay, Lea Tien; Mat Isa, Nor Ashidi; Al-batah, Mohammad Subhi

2013-01-01

Landslide is one of the natural disasters that occur in Malaysia. Topographic factors such as elevation, slope angle, slope aspect, general curvature, plan curvature, and profile curvature are considered as the main causes of landslides. In order to determine the dominant topographic factors in landslide mapping analysis, a study was conducted and presented in this paper. There are three main stages involved in this study. The first stage is the extraction of extra topographic factors. Previous landslide studies had identified mainly six topographic factors. Seven new additional factors have been proposed in this study. They are longitude curvature, tangential curvature, cross section curvature, surface area, diagonal line length, surface roughness, and rugosity. The second stage is the specification of the weight of each factor using two methods. The methods are multilayer perceptron (MLP) network classification accuracy and Zhou's algorithm. At the third stage, the factors with higher weights were used to improve the MLP performance. Out of the thirteen factors, eight factors were considered as important factors, which are surface area, longitude curvature, diagonal length, slope angle, elevation, slope aspect, rugosity, and profile curvature. The classification accuracy of multilayer perceptron neural network has increased by 3% after the elimination of five less important factors.

Determination of Important Topographic Factors for Landslide Mapping Analysis Using MLP Network

PubMed Central

Alkhasawneh, Mutasem Sh.; Ngah, Umi Kalthum; Mat Isa, Nor Ashidi; Al-batah, Mohammad Subhi

2013-01-01

Landslide is one of the natural disasters that occur in Malaysia. Topographic factors such as elevation, slope angle, slope aspect, general curvature, plan curvature, and profile curvature are considered as the main causes of landslides. In order to determine the dominant topographic factors in landslide mapping analysis, a study was conducted and presented in this paper. There are three main stages involved in this study. The first stage is the extraction of extra topographic factors. Previous landslide studies had identified mainly six topographic factors. Seven new additional factors have been proposed in this study. They are longitude curvature, tangential curvature, cross section curvature, surface area, diagonal line length, surface roughness, and rugosity. The second stage is the specification of the weight of each factor using two methods. The methods are multilayer perceptron (MLP) network classification accuracy and Zhou's algorithm. At the third stage, the factors with higher weights were used to improve the MLP performance. Out of the thirteen factors, eight factors were considered as important factors, which are surface area, longitude curvature, diagonal length, slope angle, elevation, slope aspect, rugosity, and profile curvature. The classification accuracy of multilayer perceptron neural network has increased by 3% after the elimination of five less important factors. PMID:24453846

The Next-Generation Goddard Convective-Stratiform Heating Algorithm: New Retrievals for Tropical and Extra-tropical Environments

NASA Astrophysics Data System (ADS)

Lang, S. E.; Tao, W. K.; Iguchi, T.

2017-12-01

The Goddard Convective-Stratiform Heating (or CSH) algorithm has been used to estimate cloud heating over the global Tropics using TRMM rainfall data and a set of look-up-tables (LUTs) derived from a series of multi-week cloud-resolving model (CRM) simulations using the Goddard Cumulus Ensemble model (GCE). These simulations link satellite observables (i.e., surface rainfall and stratiform fraction) with cloud heating profiles, which are not directly observable. However, with the launch of GPM in 2014, the range over which such algorithms can be applied has been extended from the Tropics into higher latitudes, including cold season and synoptic weather systems. In response, the CSH algorithm and its LUTs have been revised both to improve the retrievals in the Tropics as well as expand retrievals to higher latitudes. For the Tropics, the GCE simulations used to build the LUTs were upgraded using larger 2D model domains (512 vs 256 km) and a new, improved Goddard 4-ice scheme as well as expanded with additional cases (4 land and 6 ocean in total). The new tropical LUTs are also re-built using additional metrics. Besides surface type, conditional rain intensity and stratiform fraction, the new LUTs incorporate echo top heights and low-level (0-2 km) vertical reflectivity gradients. CSH retrievals in the Tropics based on the new LUTs show significant differences from previous iterations using TRMM data or the old LUT metrics. For the Extra-tropics, 6 NU-WRF simulations of synoptic events (3 East Coast and 3 West Coast), including snow, were used to build new extra-tropical CSH LUTs. The LUT metrics for the extra-tropics are based on radar characteristics and freezing level height. The extra-tropical retrievals are evaluated with a self-consistency check approach using the model heating as `truth,' and freezing level height is used to transition CSH retrievals from the Tropics to Extra-tropics. Retrieved zonal average heating structures in the Extra-tropics are presented and show distinct differences from those in the Tropics.

[Dehydration due to "mouth broken"].

PubMed

Meijler, D P M; van Mossevelde, P W J; van Beek, R H T

2012-09-01

Two children were admitted to a medical centre due to dehydration after an oral injury and the extraction of a tooth. One child complained of "mouth broken". Dehydration is the most common water-electrolyte imbalance in children. Babies and young children are prone to dehydration due to their relatively large body surface area, the high percentage extracellular fluid, and the limited ability of the kidneys to conserve water. After the removal ofa tooth, after an oral trauma or in case of oral discomfort, a child is at greater risk of dehydration by reduced fluid and food intake due to oral pain and/or discomfort and anxiety to drink. In those cases, extra attention needs to be devoted to the intake of fluids.

Boresight Calibration of Construction Misalignments for 3D Scanners Built with a 2D Laser Rangefinder Rotating on Its Optical Center

PubMed Central

Morales, Jesús; Martínez, Jorge L.; Mandow, Anthony; Reina, Antonio J.; Pequeño-Boter, Alejandro; García-Cerezo, Alfonso

2014-01-01

Many applications, like mobile robotics, can profit from acquiring dense, wide-ranging and accurate 3D laser data. Off-the-shelf 2D scanners are commonly customized with an extra rotation as a low-cost, lightweight and low-power-demanding solution. Moreover, aligning the extra rotation axis with the optical center allows the 3D device to maintain the same minimum range as the 2D scanner and avoids offsets in computing Cartesian coordinates. The paper proposes a practical procedure to estimate construction misalignments based on a single scan taken from an arbitrary position in an unprepared environment that contains planar surfaces of unknown dimensions. Inherited measurement limitations from low-cost 2D devices prevent the estimation of very small translation misalignments, so the calibration problem reduces to obtaining boresight parameters. The distinctive approach with respect to previous plane-based intrinsic calibration techniques is the iterative maximization of both the flatness and the area of visible planes. Calibration results are presented for a case study. The method is currently being applied as the final stage in the production of a commercial 3D rangefinder. PMID:25347585

Limits on the Time Evolution of Space Dimensions from Newton's Constant

NASA Astrophysics Data System (ADS)

Nasseri, Forough

Limits are imposed upon the possible rate of change of extra spatial dimensions in a decrumpling model Universe with time variable spatial dimensions (TVSD) by considering the time variation of (1+3)-dimensional Newton's constant. Previous studies on the time variation of (1+3)-dimensional Newton's constant in TVSD theory had not include the effects of the volume of the extra dimensions and the effects of the surface area of the unit sphere in D-space dimensions. Our main result is that the absolute value of the present rate of change of spatial dimensions to be less than about 10-14 yr-1. Our results would appear to provide a prima facie case for ruling the TVSD model out. We show that based on observational bounds on the present variation of Newton's constant, one would have to conclude that the spatial dimension of the Universe when the Universe was "at the Planck scale" to be less than or equal to 3.09. If the dimension of space when the Universe was "at the Planck scale" is constrained to be fractional and very close to 3, then the whole edifice of TVSD model loses credibility.

Comparison of cropland and forest surface temperatures across the conterminous United States

Treesearch

James D. Wickham; Timothy G. Wade; Kurt H. Riitters

2012-01-01

Global climate models (GCM) investigating the effects of land cover on climate have found that replacing extra-tropical forest with cropland promotes cooling. We compared cropland and forest surface temperatures across the continental United States in 16 cells that were approximately 1◦ × 2◦ using 1 km2 MODIS land surface...

Comparison of cropland and forest surface temperatures across the conterminous United States

EPA Science Inventory

Global climate models (GCM) investigating the effects of land cover on climate have found that replacing extra-tropical forest with cropland promotes cooling. We compared cropland and forest surface temperatures across the continental United States in 16 cells that were approxim...

Characterization of Lifshitz transitions in topological nodal line semimetals

NASA Astrophysics Data System (ADS)

Jiang, Hui; Li, Linhu; Gong, Jiangbin; Chen, Shu

2018-04-01

We introduce a two-band model of three-dimensional nodal line semimetals (NLSMs), the Fermi surface of which at half-filling may form various one-dimensional configurations of different topology. We study the symmetries and "drumhead" surface states of the model, and find that the transitions between different configurations, namely, the Lifshitz transitions, can be identified solely by the number of gap-closing points on some high-symmetry planes in the Brillouin zone. A global phase diagram of this model is also obtained accordingly. We then investigate the effect of some extra terms analogous to a two-dimensional Rashba-type spin-orbit coupling. The introduced extra terms open a gap for the NLSMs and can be useful in engineering different topological insulating phases. We demonstrate that the behavior of surface Dirac cones in the resulting insulating system has a clear correspondence with the different configurations of the original nodal lines in the absence of the gap terms.

Unexpected visitor on FDG PET/CT--brown adipose tissue (BAT) in mesentery in a case of retroperitoneal extra-adrenal pheochromocytoma: is the BAT activation secondary to catecholamine-secreting pheochromocytoma?

PubMed

Joshi, Prathamesh Vijay; Lele, Vikram Ramchandra

2012-05-01

Fused positron emission tomography-computed tomography (PET/CT) technology has enabled the determination that nonmalignant fluorodeoxyglucose (FDG) uptake is observed in brown adipose tissue (BAT). FDG uptake in BAT is a known potential source of false-positive interpretations for PET. The typical locations of BAT include neck, supraclavicular area, mediastinum, and paravertebral intercostal spaces. Examples of atypical locations for BAT include posterior neck, left paratracheal area, axillae, perirenal area, and retrocrural area. We report PET/CT findings in a young male patient with malignant retroperitoneal extra-adrenal pheochromocytoma, who demonstrated FDG uptake in BAT at multiple locations including mesenteric BAT. We also propose catecholamine-secreting pheochromocytoma as a possible cause of BAT activation in our case.

[Herpes simplex virus infections, an update for the practitioner].

PubMed

Meylan, Pascal

2011-04-27

The herpesviruses HSV-1 and -2 classically infect the oral and genital area respectively. They descend from a common ancestor but have evolved separately since several million years, getting each adapted to these areas. Thus, while both can infect either site, HSV-1 reactivates often orally, while HSV-2 does so in the genital area. The followings facts are stressed, because we think they are new, or worth attention regarding HSV epidemiology (plateauing of the HSV-2 epidemic in the US, growing share of HSV-1 as a genital herpes agent), clinical expression (extra-oral and extra-genital lesions, severity of gingivostomatitis), diagnosis (confusing herpes and zoster in the trigeminal and sacral areas) and treatment (relative worth of suppressive and episodic treatments of genital herpes, as well as shortening of these latter, and treatment of gingivostomatitis and herpes labialis).

Dental erosions and other extra-oesophageal symptoms of gastro-oesophageal reflux disease: Evidence, treatment response and areas of uncertainty.

PubMed

Pauwels, Ans

2015-04-01

Extra-oesophageal symptoms of gastro-oesophageal reflux disease (GORD) are often studied, but remain a subject of debate. It has been clearly shown that there is a relationship between the extra-oesophageal symptoms chronic cough, asthma, laryngitis and dental erosion and GORD. Literature is abundant concerning reflux-related cough and reflux-related asthma, but much less is known about reflux-related dental erosions. The prevalence of dental erosion in GORD and vice versa, the prevalence of GORD in patients with dental erosion is high but the exact mechanism of reflux-induced tooth wear erosion is still under review.

Dental erosions and other extra-oesophageal symptoms of gastro-oesophageal reflux disease: Evidence, treatment response and areas of uncertainty

PubMed Central

2015-01-01

Extra-oesophageal symptoms of gastro-oesophageal reflux disease (GORD) are often studied, but remain a subject of debate. It has been clearly shown that there is a relationship between the extra-oesophageal symptoms chronic cough, asthma, laryngitis and dental erosion and GORD. Literature is abundant concerning reflux-related cough and reflux-related asthma, but much less is known about reflux-related dental erosions. The prevalence of dental erosion in GORD and vice versa, the prevalence of GORD in patients with dental erosion is high but the exact mechanism of reflux-induced tooth wear erosion is still under review. PMID:25922676

Space telescopes planetary monitoring (PM) and Zvezdny (eng. star) patrol (ZP) for planetary science and exoplanets exploration

NASA Astrophysics Data System (ADS)

Tavrov, Alexander; Frolov, Pavel; Korablev, Oleg; Vedenkin, Nikolai; Barabanov, Sergey

2017-11-01

Solar System planetology requires a wide use of observing spectroscopy for surface geology to atmosphere climatology. A high-contrast imaging is required to study and to characterize extra-solar planetary systems among other faint astronomical targets observed in the vicinity of bright objects. Two middle class space telescopes projects aimed to observe Solar system planets by a long term monitoring via spectroscopy and polarimetry. Extra solar planets (exoplanets) engineering and scientific explorations are included in science program.

TOPEX/El Nino Watch - Warm Water Pool is Increasing, Nov. 10, 1997

NASA Technical Reports Server (NTRS)

1997-01-01

This image of the Pacific Ocean was produced using sea surface height measurements taken by the U.S./French TOPEX/Poseidon satellite. The image shows sea surface height relative to normal ocean conditions on Nov. 10, 1997. The volume of extra warm surface water (shown in white) in the core of the El Nino continues to increase, especially in the area between 15 degrees south latitude and 15 degrees north latitude in the eastern Pacific Ocean. The area of low sea level (shown in purple) has decreased somewhat from late October. The white and red areas indicate unusual patterns of heat storage; in the white areas, the sea surface is between 14 centimeters and 32 cm (6 inches to 13 inches) above normal; in the red areas, it is about 10 centimeters (4 inches) above normal. The surface area covered by the warm water mass is about one-and-one-half times the size of the continental United States. The added amount of oceanic warm water near the Americas, with a temperature between 21 to 30 degrees Celsius (70 to 85 degrees Fahrenheit), is about 30 times the volume of water in all the U.S. Great Lakes combined. The green areas indicate normal conditions, while purple (the western Pacific) means at least 18 centimeters (7 inches) below normal sea level.

The El Nino phenomenon is thought to be triggered when the steady westward blowing trade winds weaken and even reverse direction. This change in the winds allows a large mass of warm water (the red and white areas) that is normally located near Australia to move eastward along the equator until it reaches the coast of South America. The displacement of so much warm water affects evaporation, where rain clouds form and, consequently, alters the typical atmospheric jet stream patterns around the world. Using these global data, limited regional measurements from buoys and ships, and a forecasting model of the ocean-atmospheric system, the National Centers for Environmental Prediction (NCEP) of the National Oceanic and Atmospheric Administration (NOAA) has issued an advisory indicating the presence of a strong El Nino condition throughout the winter.

For more information, please visit the TOPEX/Poseidon project web page at http://topex-www.jpl.nasa.gov/

Efficacy of a new filler-containing root coating material for dentin remineralization.

PubMed

Okuyama, Katsushi; Kadowaki, Yoshitaka; Matsuda, Yasuhiro; Hashimoto, Naoki; Oki, Saiko; Yamamoto, Hiroko; Tamaki, Yukimichi; Sano, Hidehiko

2016-08-01

To evaluate a new root coating material containing surface pre-reacted glass-ionomer (S-PRG) filler for remineralization of demineralized dentin. The dentin was exposed on root surfaces of human third molars and demineralized by immersion in demineralization solution for 4 days. The demineralized dentin surface was divided into three areas. The center area was left untreated. The area on one side of the center area was coated with protective wax. The area on the other side was coated with one of four test materials: fluoride-containing S-PRG filler (PRG Barrier Coat: PR), fluoride-containing bonding agent (Bond Force: BF), fluoride-containing glass-ionomer cement as a positive control (Fuji IX EXTRA: EX), or non-fluoride-containing bonding agent as a negative control (Clearfil MegaBond: MB). The samples were stored in remineralization solution for 7 days, and then cut into two slices. The mineral changes, defined as variation in mineral loss between wax-coated area and the central untreated area, were measured in one slice by transversal microradiography. The fluoride concentration was measured in the other slice by µ-particle-induced gamma/X-ray emission. Seven thin specimens (0.25-mm thickness) of each test material were used to determine fluoride ion release from the materials over 21 days. The mineral changes were greatest for EX, followed by PR, with no difference between BF and MB (P> 0.05). Regarding the fluoride concentrations in dentin, there was no difference between EX and PR (P> 0.05). MB had the lowest value (P< 0.01). Fluoride release from EX was largest, followed by PR, with BF showing low fluoride release (P< 0.05). MB had no fluoride release. A new coating material with S-PRG filler can be applied in a thin layer on root dentin, which could be especially useful for hard-to-access lesions. This material remineralized demineralized root dentin and had fluoride diffusion characteristics similar to those of glass-ionomer cement in vitro.

The role of global cloud climatologies in validating numerical models

NASA Technical Reports Server (NTRS)

HARSHVARDHAN

1992-01-01

Global maps of the monthly mean net upward longwave radiation flux at the ocean surface were obtained for April, July, October 1985 and January 1986. These maps were produced by blending information obtained from a combination of general circulation model cloud radiative forcing fields, the top of the atmosphere cloud radiative forcing from ERBE and TOVS profiles and sea surface temperature on ISCCP C1 tapes. The fields are compatible with known meteorological regimes of atmospheric water vapor content and cloudiness. There is a vast area of high net upward longwave radiation flux (greater than 80/sq Wm) in the eastern Pacific Ocean throughout most of the year. Areas of low net upward longwave radiation flux ((less than 40/sq Wm) are the tropical convective regions and extra tropical regions that tend to have persistent low cloud cover.The technique used relies on General Circulation Model simulations and so is subject to some of the uncertainties associated with the model. However, all input information regarding temperature, moisture, and cloud cover is from satellite data having near global coverage. This feature of the procedure alone warrants its consideration for further use in compiling global maps of longwave radiation.

Assessment of intra-granular and extra-granular fracture in the development of tablet tensile strength.

PubMed

Mitra, Biplob; Hilden, Jon; Litster, James D

2018-05-24

When a tablet is compacted from deformable granules and then broken, the fracture plane may cleave granules in two (intra-granular fracture) or separate neighboring granules (extra-granular fracture). In this study, a novel method was developed to quantify the extent of intra- versus extra-granular fracture by compacting tablets from multi-colored ideal granules and evaluating fracture surfaces. The proportions of intra-granular and extra-granular fracture were quantified and modeled in light of a new metric, the deformation potential, Δ, reflecting the solid fraction increase as an initial granule bed is compressed into a final tablet. Results show that a measurable tablet strength is achieved at Δ > 0.18, but intra-granular fracture is not observed until Δ > 0.21. At very large Δ, tablets experience almost exclusively intra-granular fracture, yet the tablet tensile strength is considerably lower than that of a tablet compacted from raw powders versus pre-compacted granules. Thus, secondary compaction of granules appears to weaken the granule matrix, leading to reduced tablet tensile strength even in the presence of strong extra-granular bonding. Copyright © 2018. Published by Elsevier Inc.

Detection and quantification of extra virgin olive oil adulteration by means of autofluorescence excitation-emission profiles combined with multi-way classification.

PubMed

Durán Merás, Isabel; Domínguez Manzano, Jaime; Airado Rodríguez, Diego; Muñoz de la Peña, Arsenio

2018-02-01

Within olive oils, extra virgin olive oil is the highest quality and, in consequence, the most expensive one. Because of that, it is common that some merchants attempt to take economic advantage by mixing it up with other less expensive oils, like olive oil or olive pomace oil. In consequence, the characterization and authentication of extra virgin olive oils is a subject of great interest, both for industry and consumers. This paper reports the potential of front-face total fluorescence spectroscopy combined with second-order chemometric methods for the detection of extra virgin olive oils adulteration with other olive oils. Excitation-emission matrices (EEMs) of extra virgin olive oils and extra virgin olive oils adulterated with olive oils or with olive pomace oils were recorded using front-face fluorescence spectroscopy. The full information content in these fluorescence images was analyzed with the aid of unsupervised parallel factor analysis (PARAFAC), PARAFAC supervised by linear discriminant analysis (LDA-PARAFAC), and discriminant unfolded partial least-squares (DA-UPLS). The discriminant ability of LDA-PARAFAC was studied through the tridimensional plots of the canonical vectors, defining a surface separating the established categories. For DA-UPLS, the discriminant ability was established through the bidimensional plots of predicted values of calibration and validation samples, in order to assign each sample to a given class. The models demonstrated the possibility of detecting adulterations of extra virgin olive oils with percentages of around 15% and 3% of olive and olive pomace oils, respectively. Also, UPLS regression was used to quantify the adulteration level of extra virgin olive oils with olive oils or with olive pomace oils. Copyright © 2017 Elsevier B.V. All rights reserved.

Sensory analysis and consumer acceptance of 140 high-quality extra virgin olive oils.

PubMed

Valli, Enrico; Bendini, Alessandra; Popp, Martin; Bongartz, Annette

2014-08-01

Sensory analysis is a crucial tool for evaluating the quality of extra virgin olive oils. One aim of such an investigation is to verify if the sensory attributes themselves - which are strictly related to volatile and phenolic compounds - may permit the discrimination of high-quality products obtained by olives of different cultivars and/or grown in various regions. Moreover, a crucial topic is to investigate the interdependency between relevant parameters determining consumer acceptance and objective sensory characteristics evaluated by the panel test. By statistically analysing the sensory results, a grouping - but not discriminatory - effect was shown for some cultivars and some producing areas. The preference map shows that the most appreciated samples by consumers were situated in the direction of the 'ripe fruity' and 'sweet' axis and opposite to the 'bitter' and 'other attributes' (pungent, green fruity, freshly cut grass, green tomato, harmony, persistency) axis. Extra virgin olive oils produced from olives of the same cultivars and grown in the same areas shared similar sensorial attributes. Some differences in terms of expectation and interpretation of sensory characteristics of extra virgin olive oils might be present for consumers and panellists: most of the consumers appear unfamiliar with positive sensorial attributes, such as bitterness and pungency. © 2013 Society of Chemical Industry.

Improving the Accuracy of Satellite Sea Surface Temperature Measurements by Explicitly Accounting for the Bulk-Skin Temperature Difference

NASA Technical Reports Server (NTRS)

Wick, Gary A.; Emery, William J.; Castro, Sandra L.; Lindstrom, Eric (Technical Monitor)

2002-01-01

The focus of this research was to determine whether the accuracy of satellite measurements of sea surface temperature (SST) could be improved by explicitly accounting for the complex temperature gradients at the surface of the ocean associated with the cool skin and diurnal warm layers. To achieve this goal, work was performed in two different major areas. The first centered on the development and deployment of low-cost infrared radiometers to enable the direct validation of satellite measurements of skin temperature. The second involved a modeling and data analysis effort whereby modeled near-surface temperature profiles were integrated into the retrieval of bulk SST estimates from existing satellite data. Under the first work area, two different seagoing infrared radiometers were designed and fabricated and the first of these was deployed on research ships during two major experiments. Analyses of these data contributed significantly to the Ph.D. thesis of one graduate student and these results are currently being converted into a journal publication. The results of the second portion of work demonstrated that, with presently available models and heat flux estimates, accuracy improvements in SST retrievals associated with better physical treatment of the near-surface layer were partially balanced by uncertainties in the models and extra required input data. While no significant accuracy improvement was observed in this experiment, the results are very encouraging for future applications where improved models and coincident environmental data will be available. These results are included in a manuscript undergoing final review with the Journal of Atmospheric and Oceanic Technology.

Evaluation of the topical effect of alendronate on the root surface of extracted and replanted teeth. Microscopic analysis on rats' teeth.

PubMed

Lustosa-Pereira, Adriana; Garcia, Roberto Brandão; de Moraes, Ivaldo Gomes; Bernardineli, Norberti; Bramante, Clovis Monteiro; Bortoluzzi, Eduardo Antunes

2006-02-01

The treatment of choice for tooth avulsion is replantation. The ideal replantation should be realized as quickly as possible, or at least, the avulsed tooth should be kept in an adequate solution to preserve the periodontal ligament attached to the root. If that is not possible, treatment of the radicular surface should be done in order to prevent radicular resorption. The purpose of this study was to test sodium alendronate as a substance for topical treatment of the radicular surface of avulsed teeth in an attempt to prevent the occurrence of dental resorptions. Fifty-four rat maxillary right central incisors were extracted and replanted. Group I--extra-alveolar dry period of 15 min, intracanal dressing with calcium hydroxide (CALEN, S.S. White, Artigos Dentários LTDA, Rio de Janeiro, Brazil) and replantation; Groups II and III - extra-alveolar dry periods of 30 and 60 min, respectively, immersion in 1% sodium hypochlorite for 30 min for removal of the periodontal ligament, washing in saline solution for 5 min, and treatment of the radicular surface with 3.2 mg/l sodium alendronate solution for 10 min. Intracanal dressing with calcium hydroxide and replantation followed. At 15, 60, and 90 days post-reimplantation, the animals were killed and the samples obtained and processed for microscopic analysis. The results indicated that sodium alendronate was able to reduce the incidence of radicular resorption, but not of dental ankylosis. No significant differences were observed regarding variations in the extra-alveolar periods among the groups.

Structural Variability of Tropospheric Growth Factors Transforming Mid-latitude Cyclones to Severe Storms over the North Atlantic

NASA Astrophysics Data System (ADS)

Wild, Simon; Befort, Daniel J.; Leckebusch, Gregor C.

2015-04-01

The development of European surface wind storms out of normal mid-latitude cyclones is substantially influenced by upstream tropospheric growth factors over the Northern Atlantic. The main factors include divergence and vorticity advection in the upper troposphere, latent heat release and the presence of instabilities of short baroclinic waves of suitable wave lengths. In this study we examine a subset of these potential growth factors and their related influences on the transformation of extra-tropical cyclones into severe damage prone surface storm systems. Previous studies have shown links between specific growth factors and surface wind storms related to extreme cyclones. In our study we investigate in further detail spatial and temporal variability patterns of these upstream processes at different vertical levels of the troposphere. The analyses will comprise of the three growth factors baroclinicity, latent heat release and upper tropospheric divergence. Our definition of surface wind storms is based on the Storm Severity Index (SSI) alongside a wind tracking algorithm identifying areas of exceedances of the local 98th percentile of the 10m wind speed. We also make use of a well-established extra-tropical cyclone identification and tracking algorithm. These cyclone tracks form the base for a composite analysis of the aforementioned growth factors using ERA-Interim Reanalysis from 1979 - 2014 for the extended winter season (ONDJFM). Our composite analysis corroborates previous similar studies but extends them by using an impact based algorithm for the identification of strong wind systems. Based on this composite analysis we further identify variability patterns for each growth factor most important for the transformation of a cyclone into a surface wind storm. We thus also address the question whether the link between storm intensity and related growth factor anomaly taking into account its spatial variability is stable and can be quantified. While the robustness of our preliminary results is generally dependent on the growth factor investigated, some examples include i) the overall availability of latent heat seems to be less important than its spatial structure around the cyclone core and ii) the variability of upper-tropospheric baroclinicity appears to be highest north of the surface position of the cyclone, especially for those that transform into a surface storm.

Diamond-Based Supercapacitors: Realization and Properties.

PubMed

Gao, Fang; Nebel, Christoph E

2016-10-26

In this Spotlight on Applications, we describe our recent progress on the fabrication of surface-enlarged boron-doped polycrystalline diamond electrodes, and evaluate their performance in supercapacitor applications. We begin with a discussion of the fabrication methods of porous diamond materials. The diamond surface enlargement starts with a top-down plasma etching method. Although the extra surface area provided by surface roughening or nanostructuring provides good outcome for sensing applications, a capacitance value <1 mF cm -2 or a surface-enlargement factor <100 fail to meet the requirement of a practical supercapacitor. Driven by the need for large surface areas, we recently focused on the tempated-growth method. We worked on both supported and free-standing porous diamond materials to enhance the areal capacitance to the "mF cm -2 " range. With our newly developed free-standing diamond paper, areal capacitance can be multiplied by stacking multilayers of the electrode material. Finally, considering the fact that there is no real diamond-based supercapacitor device up to now, we fabricated the first prototype pouch-cell device based on the free-standing diamond paper to evaluate its performance. The results reveal that the diamond paper is suitable for operation in high potential windows (up to 2.5 V) in aqueous electrolyte with a capacitance of 0.688 mF cm -2 per layer of paper (or 0.645 F g -1 ). Impedance spectroscopy revealed that the operation frequency of the device exceeds 30 Hz. Because of the large potential window and the ability to work at high frequency, the specific power of the device reached 1 × 10 5 W kg -1 . In the end, we made estimations on the future target performance of diamond supercapacitors based on the existing information.

Centaur: A Mobile Dexterous Humanoid for Surface Operations

NASA Technical Reports Server (NTRS)

Rehnmark, Fredrik; Ambrose, Robert O.; Goza, S. Michael; Junkin, Lucien; Neuhaus, Peter D.; Pratt, Jerry E.

2005-01-01

Future human and robotic planetary expeditions could benefit greatly from expanded Extra-Vehicular Activity (EVA) capabilities supporting a broad range of multiple, concurrent surface operations. Risky, expensive and complex, conventional EVAs are restricted in both duration and scope by consumables and available manpower, creating a resource management problem. A mobile, highly dexterous Extra-Vehicular Robotic (EVR) system called Centaur is proposed to cost-effectively augment human astronauts on surface excursions. The Centaur design combines a highly capable wheeled mobility platform with an anthropomorphic upper body mounted on a three degree-of-freedom waist. Able to use many ordinary handheld tools, the robot could conserve EVA hours by relieving humans of many routine inspection and maintenance chores and assisting them in more complex tasks, such as repairing other robots. As an astronaut surrogate, Centaur could take risks unacceptable to humans, respond more quickly to EVA emergencies and work much longer shifts. Though originally conceived as a system for planetary surface exploration, the Centaur concept could easily be adapted for terrestrial military applications such as de-Gig, surveillance and other hazardous duties.

A glove-likeability study of specially-treated gloves in the detonator manufacturing and packaging industry

DOE PAGES

Cournoyer, Michael E.; Lawton, Cindy M.; Lounsbury, James B.; ...

2016-03-22

We use hand gloves (hereafter referred to as gloves) in the detonator manufacturing and packaging operations. As part of a process improvement program, new glove formulations have been considered that lower the overall risk of detonator operations by reducing ergonomic injury factors. Gloves with a specially treated surface for extra grip and control are now commercially available and have been recommended for use in detonator operations. A Glove Likeability Study demonstrated that detonator manufacturing and packaging workers prefer gloves with a specially treated surface over currently approved gloves made from latex and nitrile formulations. Glove material compatibility tests indicate thatmore » the recommended gloves are as compatible if not more compatible as the currently approved gloves for working with secondary explosives. Thus, these gloves with a specially treated surface for extra grip and control are now available for tasks where sensitivity and fingertip control are crucial. Replacement of the current gloves with gloves with a specially treated surface improves the safety configuration of detonator manufacturing and packaging operations.« less

A glove-likeability study of specially-treated gloves in the detonator manufacturing and packaging industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cournoyer, Michael E.; Lawton, Cindy M.; Lounsbury, James B.

We use hand gloves (hereafter referred to as gloves) in the detonator manufacturing and packaging operations. As part of a process improvement program, new glove formulations have been considered that lower the overall risk of detonator operations by reducing ergonomic injury factors. Gloves with a specially treated surface for extra grip and control are now commercially available and have been recommended for use in detonator operations. A Glove Likeability Study demonstrated that detonator manufacturing and packaging workers prefer gloves with a specially treated surface over currently approved gloves made from latex and nitrile formulations. Glove material compatibility tests indicate thatmore » the recommended gloves are as compatible if not more compatible as the currently approved gloves for working with secondary explosives. Thus, these gloves with a specially treated surface for extra grip and control are now available for tasks where sensitivity and fingertip control are crucial. Replacement of the current gloves with gloves with a specially treated surface improves the safety configuration of detonator manufacturing and packaging operations.« less

Positioning of the sensor cell on the sensing area using cell trapping pattern in incubation type planar patch clamp biosensor.

PubMed

Wang, Zhi-Hong; Takada, Noriko; Uno, Hidetaka; Ishizuka, Toru; Yawo, Hiromu; Urisu, Tsuneo

2012-08-01

Positioning the sensor cell on the micropore of the sensor chip and keeping it there during incubation are problematic tasks for incubation type planar patch clamp biosensors. To solve these problems, we formed on the Si sensor chip's surface a cell trapping pattern consisting of a lattice pattern with a round area 5 μm deep and with the micropore at the center of the round area. The surface of the sensor chip was coated with extra cellular matrix collagen IV, and HEK293 cells on which a chimera molecule of channel-rhodopsin-wide-receiver (ChR-WR) was expressed, were then seeded. We examined the effects of this cell trapping pattern on the biosensor's operation. In the case of a flat sensor chip without a cell trapping pattern, it took several days before the sensor cell covered the micropore and formed an almost confluent state. As a result, multi-cell layers easily formed and made channel current measurements impossible. On the other hand, the sensor chip with cell trapping pattern easily trapped cells in the round area, and formed the colony consisted of the cell monolayer covering the micropore. A laser (473 nm wavelength) induced channel current was observed from the whole cell arrangement formed using the nystatin perforation technique. The observed channel current characteristics matched measurements made by using a pipette patch clamp. Copyright © 2012 Elsevier B.V. All rights reserved.

Instrumentation development for In Situ 40Ar/39Ar planetary geochronology

USGS Publications Warehouse

Morgan, Leah; Munk, Madicken; Davidheiser-Kroll, Brett; Warner, Nicholas H.; Gupta, Sanjeev; Slaybaugh, Rachel; Harkness, Patrick; Mark, Darren

2017-01-01

The chronology of the Solar System, particularly the timing of formation of extra-terrestrial bodies and their features, is an outstanding problem in planetary science. Although various chronological methods for in situ geochronology have been proposed (e.g., Rb-Sr, K-Ar), and even applied (K-Ar), the reliability, accuracy, and applicability of the 40Ar/39Ar method makes it by far the most desirable chronometer for dating extra-terrestrial bodies. The method however relies on the neutron irradiation of samples, and thus a neutron source. Herein, we discuss the challenges and feasibility of deploying a passive neutron source to planetary surfaces for the in situ application of the 40Ar/39Ar chronometer. Requirements in generating and shielding neutrons, as well as analysing samples are described, along with an exploration of limitations such as mass, power and cost. Two potential solutions for the in situ extra-terrestrial deployment of the 40Ar/39Ar method are presented. Although this represents a challenging task, developing the technology to apply the 40Ar/39Ar method on planetary surfaces would represent a major advance towards constraining the timescale of solar system formation and evolution.

Taking Advantage of Reduced Droplet-surface Interaction to Optimize Transport of Bioanalytes in Digital Microfluidics

PubMed Central

Freire, Sergio L. S.; Thorne, Nathaniel; Wutkowski, Michael; Dao, Selina

2014-01-01

Digital microfluidics (DMF), a technique for manipulation of droplets, is a promising alternative for the development of “lab-on-a-chip” platforms. Often, droplet motion relies on the wetting of a surface, directly associated with the application of an electric field; surface interactions, however, make motion dependent on droplet contents, limiting the breadth of applications of the technique. Some alternatives have been presented to minimize this dependence. However, they rely on the addition of extra chemical species to the droplet or its surroundings, which could potentially interact with droplet moieties. Addressing this challenge, our group recently developed Field-DW devices to allow the transport of cells and proteins in DMF, without extra additives. Here, the protocol for device fabrication and operation is provided, including the electronic interface for motion control. We also continue the studies with the devices, showing that multicellular, relatively large, model organisms can also be transported, arguably unaffected by the electric fields required for device operation. PMID:25407533

Casting ability of selected impression materials tested in different conditions in an in vitro sulcus model.

PubMed

Kolbeck, Carola; Rosentritt, Martin; Lang, Reinhold; Schiller, Manuela; Handel, Gerhard

2009-10-01

To test casting capacities of impression materials under dry and wet sulcular conditions in vitro. An incisor with a circular shoulder preparation (1 mm) was inserted in a primary mold. A shiftable secondary mold allowed adaptation of sulcular depth (1 to 4 mm). An outer circular chamfer assured reproducible positioning of an impression material carrier. Tested materials were PVS of differing viscosities (extra low, Panasil Contact Plus [ELV]; low, Affinis Light Body [LV]; and medium, Virtual Monophase [MV]) and one polyether material of low viscosity (Permadyne Garant [PE]). Impressions were made with sulcular depths of 1 to 4 mm in wet and 1 and 4 mm in dry conditions, cut in half, and digitized with a light microscope (Stemi SV8). Surface area of the region of interest (ROI, at inner angle of preparation) was determined with Optimas 6.2. Medians were calculated, and statistical analysis was performed using the Mann-Whitney U test (P # .05). Median values of the measurements under wet condition demonstrated the smallest ROI areas for the ELV (297-330[pixel]) and the MV (253-421[pixel]) materials followed by the LV (582-745[pixel]) and the PELV (544-823[pixel]). All materials showed significantly higher values for the wet compared to dry sulcular conditions. Repeated measurements showed no significant differences to the corresponding first determined series. The sulcus model is applicable to assess casting abilities of impression materials in clinically approximated sulcular conditions. The PVS materials with extra low and medium viscosities showed the best properties in dry and wet conditions.

Improvements in the malaxation process to enhance the aroma quality of extra virgin olive oils.

PubMed

Reboredo-Rodríguez, P; González-Barreiro, C; Cancho-Grande, B; Simal-Gándara, J

2014-09-01

The influence of olive paste preparation conditions on the standard quality parameters, as well as volatile profiles of extra virgin olive oils (EVOOs) from Morisca and Manzanilla de Sevilla cultivars produced in an emerging olive growing area in north-western Spain and processed in an oil mill plant were investigated. For this purpose, two malaxation temperatures (20/30 °C), and two malaxation times (30/90 min) selected in accordance with the customs of the area producers were tested. The volatile profile of the oils underwent a substantial change in terms of odorant series when different malaxation parameters were applied. Copyright © 2014 Elsevier Ltd. All rights reserved.

Self-Assembly of Flux-Closure Polygons from Magnetite Nanocubes.

PubMed

Szyndler, Megan W; Corn, Robert M

2012-09-06

Well-defined nanoscale flux-closure polygons (nanogons) have been fabricated on hydrophilic surfaces from the face-to-face self-assembly of magnetite nanocubes. Uniform ferrimagnetic magnetite nanocubes (∼86 nm) were synthesized and characterized with a combination of electron microscopy, diffraction, and magnetization measurements. The nanocubes were subsequently cast onto hydrophilic substrates, wherein the cubes lined up face-to-face and formed a variety of polygons due to magnetostatic and hydrophobic interactions. The generated surfaces consist primarily of three- and four-sided nanogons; polygons ranging from two to six sides were also observed. Further examination of the nanogons showed that the constraints of the face-to-face assembly of nanocubes often led to bowed sides, strained cube geometries, and mismatches at the acute angle vertices. Additionally, extra nanocubes were often present at the vertices, suggesting the presence of external magnetostatic fields at the polygon corners. These nanogons are inimitable nanoscale magnetic structures with potential applications in the areas of magnetic memory storage and high-frequency magnetics.

Automation and robotics human performance

NASA Technical Reports Server (NTRS)

Mah, Robert W.

1990-01-01

The scope of this report is limited to the following: (1) assessing the feasibility of the assumptions for crew productivity during the intra-vehicular activities and extra-vehicular activities; (2) estimating the appropriate level of automation and robotics to accomplish balanced man-machine, cost-effective operations in space; (3) identifying areas where conceptually different approaches to the use of people and machines can leverage the benefits of the scenarios; and (4) recommending modifications to scenarios or developing new scenarios that will improve the expected benefits. The FY89 special assessments are grouped into the five categories shown in the report. The high level system analyses for Automation & Robotics (A&R) and Human Performance (HP) were performed under the Case Studies Technology Assessment category, whereas the detailed analyses for the critical systems and high leverage development areas were performed under the appropriate operations categories (In-Space Vehicle Operations or Planetary Surface Operations). The analysis activities planned for the Science Operations technology areas were deferred to FY90 studies. The remaining activities such as analytic tool development, graphics/video demonstrations and intelligent communicating systems software architecture were performed under the Simulation & Validations category.

[Survival capacity of Corynebacterium pseudotuberculosis biovar ovis in different soil types from Chubut, Argentine Patagonia].

PubMed

Alvarez, Laura; William, Aillin; Castro, Isabel; Valenzuela, Fernanda; Estevao Belchior, Silvia

Corynebacterium pseudotuberculosis is transmitted among sheep in Argentine Patagonia causing pseudotuberculosis. The bacterium penetrates the skin or mucous membrane wounds, infecting the superficial lymph nodes and viscera. When surface abscesses are cut during shearing, they drain their purulent contents and contaminate tools and the soil. The objective of this work was to evaluate the survival capacity of C. pseudotuberculosis over time, in soils from the extra-Andean Patagonia region. Five types of superficial soils were collected from different areas in Chubut province (extra-Andean Patagonia), having distinctive physicochemical properties including organic matter content (very high to nonexistent), pH (neutral to strongly alkaline), electrical conductivity (saline to non-saline) and texture (sandy, clayey, silty loam). Different aliquots of each type of soil were inoculated with C. pseudotuberculosis PAT10 strain isolated from a Patagonian sheep, and were stored at room temperature. The number of surviving bacteria was determined at various times. Sixty percent (60%) of the inoculated C. pseudotuberculosis population survived for 80 to 210 days in soils with moderate to high organic matter content respectively. Silty soils favored bacterial survival, whereas the variables pH and salinity had no effect on survival. Copyright © 2016 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

Geologic Map of the Upper Parashant Canyon and Vicinity, Mohave County, Northwestern Arizona

USGS Publications Warehouse

Billingsley, George H.; Harr, Michelle L.; Wellmeyer, Jessica L.

2000-01-01

Introduction The geologic map of the upper Parashant Canyon area covers part of the Colorado Plateau and several large tributary canyons that make up the western part of Arizona's Grand Canyon. The map is part of a cooperative U.S. Geological Survey and National Park Service project to provide geologic information for areas within the newly established Grand Canyon/Parashant Canyon National Monument. Most of the Grand Canyon and parts of the adjacent plateaus have been geologically mapped; this map fills in one of the remaining areas where uniform quality geologic mapping was needed. The geologic information presented may be useful in future related studies as to land use management, range management, and flood control programs for federal and state agencies, and private concerns. The map area is in a remote region of the Arizona Strip, northwestern Arizona about 88 km south of the nearest settlement of St. George, Utah. Elevations range from about 1,097 m (3,600 ft) in Parashant Canyon (south edge of map area) to 2,145 m (7,037 ft) near the east-central edge of the map area. Primary vehicle access is by dirt road locally known as the Mount Trumbull road; unimproved dirt roads and jeep trails traverse various parts of the map area. Travel on the Mount Trumbull road is possible with 2-wheel-drive vehicles except during wet conditions. Extra fuel, two spare tires and extra food and water are highly recommended when traveling in this remote area. The map area includes about 26 sections of land belonging to the State of Arizona, about 40 sections of private land, and a small strip of the Lake Mead National Recreation Area (southeast edge of the map area). The private land is mainly clustered around the abandoned settlement of Mt. Trumbull, locally known as Bundyville, and a few sections are scattered in the upper Whitmore Canyon area just south of Bundyville. Lower elevations within the canyons support a sparse growth of sagebrush, cactus, grass, creosote bush, and a variety of desert shrubs. Sagebrush, grass, cactus, cliffrose bush, pinyon pine trees, juniper trees, and some ponderosa pines thrive at higher elevations. Surface runoff in the north half of the map area drains northward towards the Virgin River in Utah via Hurricane Wash. In the south half of the area, it drains towards the Colorado River in Grand Canyon via Parashant and Whitmore Canyons. Upper Parashant and Whitmore Canyons are part of the physiography of the western Grand Canyon, but are not included within Grand Canyon National Park. The entire map area is now within the newly established Grand Canyon/Parashant Canyon National Monument (as of January, 2000), and is jointly managed by the Lake Mead National Recreational Area, Boulder City, Nevada, and the Bureau of Land Management, Arizona Strip District, St. George, Utah. Surface runoff in the north half of the map area drains northward towards the Virgin River in Utah via Hurricane Wash. In the south half of the area, it drains towards the Colorado River in Grand Canyon via Parashant and Whitmore Canyons. Upper Parashant and Whitmore Canyons are part of the physiography of the western Grand Canyon, but are not included within Grand Canyon National Park. The entire map area is now within the newly established Grand Canyon/Parashant Canyon National Monument (January, 2000), and is jointly managed by the Lake Mead National Recreational Area, Boulder City, Nevada, and the Bureau of Land Management, Arizona Strip District, St. George, Utah.

Scattered colorimetry and multivariate data processing as an objective tool for liquid mapping (Invited Paper)

NASA Astrophysics Data System (ADS)

Mignani, A. G.; Ciaccheri, L.; Smith, P. R.; Cimato, A.; Attilio, C.; Huertas, R.; Melgosa Latorre, Manuel; Bertho, A. C.; O'Rourke, B.; McMillan, N. D.

2005-05-01

Scattered colorimetry, i.e., multi-angle and multi-wavelength absorption spectroscopy performed in the visible spectral range, was used to map three kinds of liquids: extra virgin olive oils, frying oils, and detergents in water. By multivariate processing of the spectral data, the liquids could be classified according to their intrinisic characteristics: geographic area of extra virgin olive oils, degradation of frying oils, and surfactant types and mixtures in water.

Embedding of the brane into six dimensions

NASA Astrophysics Data System (ADS)

Gogberashvili, Merab

2002-10-01

Embedding of the brane metric into Euclidean (2+4)-space is found. Brane geometry can be visualized as the surface of the hypersphere in six dimensions which ``radius'' is governed by the cosmological constant. Minkowski space in this picture is placed on the intersection of this surface with the plane formed by the extra space-like and time-like coordinates.

Visualization of the extra-articular portion of the long head of the biceps tendon during intra-articular shoulder arthroscopy.

PubMed

Festa, Anthony; Allert, Jesse; Issa, Kimona; Tasto, James P; Myer, Jonathan J

2014-11-01

To quantify the amount of the extra-articular long head of the biceps tendon (LHBT) seen during intra-articular shoulder arthroscopy by pulling the tendon into the joint with a probe through an anterior portal while viewing through a standard posterior portal. Intra-articular shoulder arthroscopy was performed on 10 forequarter cadaveric specimens. The extra-articular portion of the LHBT was evaluated by pulling the tendon into the joint with an arthroscopic probe inserted through an anterior portal. The tendon was marked at the pulley insertion on the humerus with a vascular clip before and after the tendon was pulled into the joint. An open deltopectoral approach was performed, and the amount of extra-articular tendon visualized was calculated as an absolute amount and in relation to nearby anatomic structures. An additional 1.9 cm (range, 1.4 to 2.6 cm) of extra-articular LHBT was viewed by pulling the tendon into the joint with an arthroscopic probe through an anterior portal during shoulder arthroscopy. This represented 30.8% of the extra-articular portion of the tendon, 47.7% of tendon in the bicipital groove, and 76.3% of the tendon that lies under the area from the pulley insertion to the distal edge of the transverse humeral ligament. During intra-articular shoulder arthroscopy, the extra-articular portion of the LHBT is incompletely visualized by pulling the tendon into the joint with a probe placed through an anterior portal while viewing through a standard posterior portal. An additional extra-articular portion of the LHBT may be viewed by pulling the tendon into the joint with an arthroscopic probe during shoulder arthroscopy. Copyright © 2014 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

Effects of multipurpose solutions on the adhesion of Acanthamoeba to rigid gas permeable contact lenses.

PubMed

Lee, Ga-Hyun; Yu, Hak-Sun; Lee, Ji-Eun

2016-03-01

To evaluate the effect of multipurpose contact lens care solutions (MPSs) on the adhesion of Acanthamoeba to rigid gas permeable (RGP) contact lenses. Acanthamoeba castellanii (AC) trophozoites were inoculated onto untreated RGP contact lenses (FP, Extra, or Menicon Z), and numbers of trophozoites adhering to lenses were counted under a phase contrast microscope at 18 h post-inoculation (controls). Similarly, adhering trophozoites were counted at 6 h post-inoculation on each of the three RGP lens types with one of three MPSs (Boston Simplus, Menicare Plus, and O2 Care). Scanning electron microscopic examinations were performed to compare lens surfaces. Adhesion of AC trophozoites to untreated FP was greater than to untreated Extra or Menicon Z. Surfaces of Extra and Menicon Z lenses were waxier, smoother, and more homogeneous than those of FP lenses. After treatment with Boston Simplus, adhesion of AC trophozoites was significantly reduced for all lens types as compared with controls (p < 0.0001). Treatments with Menicare Plus or O2 Care reduced the number of adherent AC trophozoites significantly on FP lenses only as compared with controls (p < 0.0001). The adhesion rates of AC trophozoites to RGP lenses depended on lens surfaces. Boston Simplus reduced the adhesion rate of AC trophozoites more than Menicare Plus or O2 Care. Appropriate RGP lens and MPS selection could decrease the prevalence of Acanthamoeba keratitis. © 2016 The Authors Ophthalmic & Physiological Optics © 2016 The College of Optometrists.

The latitudinal diversity gradient in South American mammals revisited using a regional analysis approach: The importance of climate at extra-tropical latitudes and history towards the tropics

PubMed Central

Ruggiero, Adriana

2017-01-01

The latitudinal diversity gradient has been considered a consequence of a shift in the impact of abiotic and biotic factors that limit species distributions from the poles to the equator, thus influencing species richness variation. It has also been considered the outcome of evolutionary processes that vary over geographical space. We used six South American mammal groups to test the association of environmental and evolutionary factors and the ecological structuring of mammal assemblages with spatial variation in taxonomic richness (TR), at a spatial resolution of 110 km x 110 km, at tropical and extra-tropical latitudes. Based on attributes that represent what mammal species do in ecosystems, we estimated ecological diversity (ED) as a mean pairwise ecological distance between all co-occurring taxa. The mean pairwise phylogenetic distance between all co-occurring taxa (AvPD) was used as an estimation of phylogenetic diversity. Geographically Weighted Regression analyses performed separately for each mammal group identified tropical and extra-tropical high R2 areas where environmental and evolutionary factors strongly accounted for richness variation. Temperature was the most important predictor of TR in high R2 areas outside the tropics, as was AvPD within the tropics. The proportion of TR variation accounted for by environment (either independently or combined with AvPD) was higher in tropical areas of high richness and low ecological diversity than in tropical areas of high richness and high ecological diversity. In conclusion, we confirmed a shift in the impact of environmental factors, mainly temperature, that best account for mammal richness variation in extra-tropical regions, whereas phylogenetic diversity best accounts for richness variation within the tropics. Environment in combination with evolutionary history explained the coexistence of a high number of ecologically similar species within the tropics. Consideration of the influence of contemporary environmental variables and evolutionary history is crucial to understanding of the latitudinal diversity gradient. PMID:28873434

Deriving global parameter estimates for the Noah land surface model using FLUXNET and machine learning

NASA Astrophysics Data System (ADS)

Chaney, Nathaniel W.; Herman, Jonathan D.; Ek, Michael B.; Wood, Eric F.

2016-11-01

With their origins in numerical weather prediction and climate modeling, land surface models aim to accurately partition the surface energy balance. An overlooked challenge in these schemes is the role of model parameter uncertainty, particularly at unmonitored sites. This study provides global parameter estimates for the Noah land surface model using 85 eddy covariance sites in the global FLUXNET network. The at-site parameters are first calibrated using a Latin Hypercube-based ensemble of the most sensitive parameters, determined by the Sobol method, to be the minimum stomatal resistance (rs,min), the Zilitinkevich empirical constant (Czil), and the bare soil evaporation exponent (fxexp). Calibration leads to an increase in the mean Kling-Gupta Efficiency performance metric from 0.54 to 0.71. These calibrated parameter sets are then related to local environmental characteristics using the Extra-Trees machine learning algorithm. The fitted Extra-Trees model is used to map the optimal parameter sets over the globe at a 5 km spatial resolution. The leave-one-out cross validation of the mapped parameters using the Noah land surface model suggests that there is the potential to skillfully relate calibrated model parameter sets to local environmental characteristics. The results demonstrate the potential to use FLUXNET to tune the parameterizations of surface fluxes in land surface models and to provide improved parameter estimates over the globe.

Extra-scalp black dot ringworm caused by Trichophyton tonsurans among contact sports players.

PubMed

Mochizuki, Takashi; Kawasaki, Masako; Anzawa, Kazushi; Kojima, Kiyoto; Hatta, Junko; Tababe, Hiroshi; Higaki, Shuichi; Fujita, Shigeru

2012-04-01

We describe here two patients with tinea corporis exhibiting black dot ringworm (BDR). A cluster of black dots was observed on the extensor surfaces of the extremities of two rather hairy male patients, a 15-year-old judo practitioner and a 26-year-old combined martial arts fighter, during treatment of tinea corporis with topical antimycotics. Direct KOH examination showed that the black dots were composed of degenerated hair with numerous arthroconidia and were indistinguishable from BDR of tinea capitis. Trichophyton tonsurans was isolated from the dots of both patients. Although they were diagnosed with tinea corporis, they required 2-3 months of treatment with oral terbinafine. Dermatologists should be aware that BDR can appear on areas of the skin other than the scalp.

Large Blast and Thermal Simulator Reflected Wave Eliminator Study

DTIC Science & Technology

1990-03-01

it delays the passage of this wave through the test section until after the test is complete. The required length of extra duct depends on the strength...tube axis, which acts like an additional contraction effect since Se = Sj/[Cqsin(aj)]. Tii extra area is illustrated best by plotting (Se-Ae)/Ac versus...34Simulation de Choc et de Soaffie. Comimpensateur d’Ondes de Detente de Bouche pour tube a Choc de 2400 mm de diametre de Veine. Description, Compte- Renda

Economics of installation of solar heating plants

NASA Astrophysics Data System (ADS)

Popel, O. S.; Frid, S. Y.; Shpiltayn, E. E.

1984-04-01

An engineering-economic analysis of solar heating plants for determination of their cost effectiveness involves calculating the maximum economically feasibile extra capital investment on their installation and calculating the fraction of the total heat demand covered by such a plant which makes replacement of conventional heating plant maximally economical. The annual economic effect of solar heating is calculated in terms of normalized cost differential, as criterion for its competitiveness with conventional heating. Plant performance characteristics, namely dependence of both the percent demand coverage and the annual cost differential on the area of solar radiation collectors is then considered. Analysis of the cost equation, assuming that the extra fixed cost is proportional to the collector area, reveals the necessary and sufficient condition for decrease of annual operating cost.

Multi-Functions of Carbonated Calcium Deficient Hydroxyapatite (CDHA)

NASA Astrophysics Data System (ADS)

Zhou, Huan

Natural bone is a complex composite mainly constituted of inorganic minerals and organic collagen molecules. Calcium phosphate (CaP) based materials have been proposed as the predominant bone substitute for bone tissue engineering applications due to their chemical similarity to bone mineral. Amorphous carbonated calcium deficient hydroxyapatite (CDHA) is an important compound among CaP materials because of the amorphous crystallite structure. The presence of extra ions in its lattice structure not only influences cell attachment and proliferation of osteoblasts, but also helps in bone metabolism. Biomimetic coating approach is the most widely used approach to produce CDHA coatings to implant. It is a process using simulated body fluid (SBF) to deposit bone-like CDHA coating to various material surfaces. The CDHA formation mechanism, SBF compositions and reacting conditions of biomimetic coating have already been sufficiently studied and compared in the past 20 years. It is an attempt in this thesis to explore new applications of SBF in biomedical research, focusing on different biomaterial applications: 1) based on the low temperature reaction condition of SBF, bisphosphonate incorporated CDHA coatings were deposited onto Ti6Al4V surface for the treatment of osteoporosis; 2) amorphous calcium phosphate nanospheres with extra elements in the lattice structure were prepared by a novel microwave assisted approach, providing a new potential of CaP materials production; 3) CDHA particles formed in SBF can be used as great fillers with biopolymers for preparing biocomposites for biomedical applications; 4) based on the high activity of CDHA amorphous structure and the stabilization ability of ethanol, yttrium and europium doped calcium phosphates were prepared using CDHA as a sacrificing template. In the end, future work based on these observations in the thesis is addressed, including areas of drug delivery, biocomposite fabrication and preparation of functionalized calcium phosphate materials.

Fracture resistance of Ti-5Al-2.5Sn extra-low interstitial castings

NASA Technical Reports Server (NTRS)

Fiftal, C. F.; Bolstad, D. A.; Misra, M. S.

1978-01-01

Fracture toughness and cyclic crack propagation data for Ti-5Al-2.5Sn extra-low interstitial (ELI) castings, 0.51 and 2.54 cm (0.20 and 1.00 in.) thick, at 394, 294, 77, and 20 K (250, 70, -320, and -423 F), are presented. Both surface flaw and compact tension geometries were tested. Comparison is made with other titanium alloys in both wrought and cast forms. Crack propagation resistance is comparable to wrought Ti-5Al-2.5Sn ELI, even with the extremely coarse as-cast grain size encountered.

The eXtra Small Analyzer for Neutrals (XSAN) instrument on-board of the Lunar-Glob lander

NASA Astrophysics Data System (ADS)

Wieser, Martin; Barabash, Stas

A large fraction of up to 20 precent of the solar wind impinging onto the lunar surface is reflected back to space as energetic neutral atoms. The SARA instrument on the Chandrayaan-1 mission provided a comprehensive coverage of the lunar surface of this interaction by mapping it from a 100 - 200 km orbit. The micro-physics of this reflection process is unexplored however. With the eXtra Small Analyzer for Neutrals instrument (XSAN) placed on the Lunar-Glob lander, we will directly investigate the production process of energetic neutral atoms from a vantage point of only meters from the surface for the first time. The XSAN design is based on the Solar Wind Monitor (SWIM) family of instruments originally flown on the Indian Chandrayaan-1 mission and with derivatives built e.g. for ESA's BepiColombo Mission to Mercury or for Phobos-Grunt. XSAN extends the functionality of this instrument family by adding a neutral atom to ion conversion surface in its entrance system. This will make it possible to measure detailed energy spectra and mass composition of the energetic neutral atoms originating from the lunar surface. We present an overview of the XSAN instrument and its science and report on latest developments.

A NEW TWIST IN THE EVOLUTION OF LOW-MASS STARS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denissenkov, Pavel A., E-mail: pavelden@uvic.ca

2012-07-01

We show that the evolutionary track of a low-mass red giant should make an extended zigzag on the Hertzsprung-Russel diagram just after the bump luminosity if fast internal rotation and enhanced extra mixing in the radiative zone bring the temperature gradient close to the adiabatic one. This can explain both the location and peculiar surface chemical composition of Li-rich K giants studied by Kumar et al. We also discuss a striking resemblance between the photometric and composition peculiarities of these stars and giant components of RS CVn binaries. We demonstrate that the observationally constrained values of the temperature gradient inmore » the Li-rich K giants agree with the required rate of extra mixing only if the turbulence that is believed to be responsible for this extra mixing is highly anisotropic, with its associated transport coefficients in the horizontal direction strongly dominating over those in the vertical direction.« less

Where have all the doctors gone? (2). Intraurban trends: changes in the geographic distribution of general practitioners in Auckland, 1980-7.

PubMed

Barnett, J R

1991-08-14

During the 1980s the Auckland metropolitan area increased its share of all general practitioners in New Zealand at a much faster rate than its share of the population, resulting in a high level of availability by 1987. In the light of such trends, neoclassical theory would predict a diffusion of general practitioners into areas with fewer doctors where there is less competition for patients. Data for 1980-7, however, indicates that for every FTE general practitioner who located in doctor poor areas of the city, 1.87 general practitioners continued to open practices in areas already well provided for. Or, for every extra consultation that took place in low income suburbs, 1.51 extra consultations occurred in more affluent localities. These results do not provide strong support for a market led diffusion of doctors into areas of need and any gains in increased equity appear to have been achieved at the expense of considerable inefficiency given the likely presence of induced demand.

A comparative clinical study evaluating stain removal efficacy of a new sensitivity whitening dentifrice compared to commercially available whitening dentifrices.

PubMed

Hughes, Nathan; Maggio, Brenda; Sufi, Farzana; Mason, Stephen; Kleber, Carl J

2009-01-01

To assess the extrinsic stain removal efficacy of a new sensitivity dentifrice containing sodium tripolyphosphate (STP) to marketed whitening toothpastes after six weeks of product use. This was a single-center, double-blind, stratified, six-week clinical study comparing the reduction in stain area and intensity of Sensodyne Extra Whitening to Crest Maximum Strength Sensitivity Protection Whitening plus Scope and Colgate Tartar Control Plus Whitening Mint dentifrice, as measured by MacPherson's Modification of the Lobene Stain Index (MMLSI) in a forced stain model. Two-hundred and ninety-five subjects completed the study. Tooth stain MMSLI scores showed significant differences between Sensodyne and Crest dentifrices in favor of Sensodyne for all surface sites (p = 0.014), and individually for facial (p = 0.023), lingual (p = 0.027), and interproximal (p = 0.014) surfaces. No significant statistical differences between Sensodyne and Colgate dentifrices were observed for any of the surfaces. Results from this stain removal clinical study demonstrate significant extrinsic stain removal efficacy for all dentifrices relative to baseline. Significant differences between the two marketed sensitivity whitening dentifrices were demonstrated in favor of the new Sensodyne Sensitivity Whitening dentifrice.

18 CFR Appendix A to Part 2 - Guidance for Determining the Acceptable Construction Area for Replacements

Code of Federal Regulations, 2011 CFR

2011-04-01

.... Typical work spaces are: Item Typical extra area (width/length) Two lane road (bored) 25-50 by 100 feet. Four lane road (bored) 50 by 100 feet. Major river (wet cut) 100 by 200 feet. Intermediate stream (wet...

Teen Area, Solon Branch, Cuyahoga County Public Library, Solon, Ohio.

ERIC Educational Resources Information Center

Voice of Youth Advocates, 2003

2003-01-01

Describes the teen area of the Solon Branch library in Cuyahoga County (Ohio). Highlights include the collection; catalog computers; hours and teen traffic; planning the space, including extra display units of bulletin boards; teen programming, including monthly programs and a summer reading program; and the teen advisory group. (LRW)

Anatomic measurements of the posterior tympanum related to the round window vibroplasty in congenital aural atresia and stenosis patients.

PubMed

Chen, Keguang; Yin, Dongming; Lyu, Huiying; Yang, Lin; Zhang, Tianyu; Dai, Peidong

2016-01-01

With the aggravation of the external auditory canal malformation, the size of extra-niche fossa became smaller, providing concrete data and valuable information for the better design, selecting and safer implantation of the transducer in the area of round window niche. Three-dimensional measurements and assessments before surgery might be helpful for a safer surgical approach and implantation of a vibrant soundbridge. The aim of this study was to investigate whether differences exist in the morphology of the posterior tympanum related to the round window vibroplasty among congenital aural atresia (CAA), congenital aural stenosis (CAS), and a normal control group, and to analyze its effect on the round window implantation of vibrant soundbridge. CT images of 10 normal subjects (20 ears), 27 CAS patients (30 ears), and 25 CAA patients (30 ears) were analyzed. The depth and the size of outside fossa of round window niche related to the round window vibroplasty (extra-niche fossa)and the distances between the center of round window niche and extra-niche fossa were calculated based on three-dimensional reconstruction using mimics software. Finally, the data were analyzed statistically. The size of extra-niche fossa in the atresia group was smaller than in the stenosis group (p < 0.05); furthermore, the size of extra-niche fossa in the stenosis group was smaller than that of the control group (p < 0.05). There was no statistically significant difference of the depth of extra-niche fossa among different groups.

Faithful or not: direct and indirect effects of climate on extra-pair paternities in a population of Alpine marmots

PubMed Central

Allainé, Dominique; Sauzet, Sandrine; Cohas, Aurélie

2016-01-01

Despite being identified an area that is poorly understood regarding the effects of climate change, behavioural responses to climatic variability are seldom explored. Climatic variability is likely to cause large inter-annual variation in the frequency of extra-pair litters produced, a widespread alternative mating tactic to help prevent, correct or minimize the negative consequences of sub-optimal mate choice. In this study, we investigated how climatic variability affects the inter-annual variation in the proportion of extra-pair litters in a wild population of Alpine marmots. During 22 years of monitoring, the annual proportion of extra-pair litters directly increased with the onset of earlier springs and indirectly with increased snow in winters. Snowier winters resulted in a higher proportion of families with sexually mature male subordinates and thus, created a social context within which extra-pair paternity was favoured. Earlier spring snowmelt could create this pattern by relaxing energetic, movement and time constraints. Further, deeper snow in winter could also contribute by increasing litter size and juvenile survival. Optimal mate choice is particularly relevant to generate adaptive genetic diversity. Understanding the influence of environmental conditions and the capacity of the individuals to cope with them is crucial within the context of rapid climate change. PMID:28003452

Faithful or not: direct and indirect effects of climate on extra-pair paternities in a population of Alpine marmots.

PubMed

Bichet, Coraline; Allainé, Dominique; Sauzet, Sandrine; Cohas, Aurélie

2016-12-28

Despite being identified an area that is poorly understood regarding the effects of climate change, behavioural responses to climatic variability are seldom explored. Climatic variability is likely to cause large inter-annual variation in the frequency of extra-pair litters produced, a widespread alternative mating tactic to help prevent, correct or minimize the negative consequences of sub-optimal mate choice. In this study, we investigated how climatic variability affects the inter-annual variation in the proportion of extra-pair litters in a wild population of Alpine marmots. During 22 years of monitoring, the annual proportion of extra-pair litters directly increased with the onset of earlier springs and indirectly with increased snow in winters. Snowier winters resulted in a higher proportion of families with sexually mature male subordinates and thus, created a social context within which extra-pair paternity was favoured. Earlier spring snowmelt could create this pattern by relaxing energetic, movement and time constraints. Further, deeper snow in winter could also contribute by increasing litter size and juvenile survival. Optimal mate choice is particularly relevant to generate adaptive genetic diversity. Understanding the influence of environmental conditions and the capacity of the individuals to cope with them is crucial within the context of rapid climate change. © 2016 The Author(s).

Ovulation and extra-ovarian origin of ovarian cancer

PubMed Central

Yang-Hartwich, Yang; Gurrea-Soteras, Marta; Sumi, Natalia; Joo, Won Duk; Holmberg, Jennie C.; Craveiro, Vinicius; Alvero, Ayesha B.; Mor, Gil

2014-01-01

The mortality rate of ovarian cancer remains high due to late diagnosis and recurrence. A fundamental step toward improving detection and treatment of this lethal disease is to understand its origin. A growing number of studies have revealed that ovarian cancer can develop from multiple extra-ovarian origins, including fallopian tube, gastrointestinal tract, cervix and endometriosis. However, the mechanism leading to their ovarian localization is not understood. We utilized in vitro, ex vivo, and in vivo models to recapitulate the process of extra-ovarian malignant cells migrating to the ovaries and forming tumors. We provided experimental evidence to support that ovulation, by disrupting the ovarian surface epithelium and releasing chemokines/cytokines, promotes the migration and adhesion of malignant cells to the ovary. We identified the granulosa cell-secreted SDF-1 as a main chemoattractant that recruits malignant cells towards the ovary. Our findings revealed a potential molecular mechanism of how the extra-ovarian cells can be attracted by the ovary, migrate to and form tumors in the ovary. Our data also supports the association between increased ovulation and the risk of ovarian cancer. Understanding this association will lead us to the development of more specific markers for early detection and better prevention strategies. PMID:25135607

Ordinary People and Extra-Ordinary Protections: A Post-Kleinian Approach to the Treatment of Primitive Mental States. The New Library of Psychoanalysis 40.

ERIC Educational Resources Information Center

Mitrani, Judith L.

Many people come to analysis appearing quite ordinary on the surface. However, once below that surface, there often appear extraordinary protections created to keep at bay any awareness of deeply traumatic happenings occurring at some point in life. This book investigates the development and function of these protections, allowing the reader to…

Highly uniform distribution of Pt nanoparticles on N-doped hollow carbon spheres with enhanced durability for oxygen reduction reaction

DOE PAGES

Shi, Qiurong; Zhu, Chengzhou; Engelhard, Mark H.; ...

2017-01-19

Here, carbon-supported Pt nanostructures currently exhibited great potential in polymer electrolyte membrane fuel cells. Nitrogen-doped hollow carbon spheres (NHCSs) with extra low density and high specific surface area are promising carbon support for loading Pt NPs. The doped heteroatom of nitrogen could not only contribute to the active activity for the oxygen reduction reaction (ORR), but also shows a strong interaction with Pt NPs for entrapping them from dissolution/migration. This synergetic effect/interaction resulted in the uniform dispersion and strong combination of the Pt NPs on the carbon support and thus play a significant role in hindering the degradation of themore » catalytic activities of Pt NPs. As expected, the as-obtained Pt/NHCSs displayed improved catalytic activity and superior durability toward ORR.« less

Grinding With Diamond Burs and Hydrothermal Aging of a Y-TZP Material: Effect on the Material Surface Characteristics and Bacterial Adhesion.

PubMed

Dutra, Dam; Pereira, Gkr; Kantorski, K Z; Exterkate, Ram; Kleverlaan, C J; Valandro, L F; Zanatta, F B

The aim of this study was to evaluate the effect of grinding with diamond burs and low-temperature aging on the material surface characteristics and bacteria adhesion on a yttrium-stabilized tetragonal zirconia polycrystalline (Y-TZP) surface. Y-TZP specimens were made from presintered blocks, sintered as recommended by the manufacturer, and assigned into six groups according to two factors-grinding (three levels: as sintered, grinding with extra-fine diamond bur [25-μm grit], and grinding with coarse diamond bur [181-μm grit]) and hydrothermal aging-to promote low-temperature degradation (two levels: presence/absence). Phase transformation (X-ray diffractometer), surface roughness, micromorphological patterns (atomic force microscopy), and contact angle (goniometer) were analyzed. Bacterial adhesion (colony-forming units [CFU]/biofilm) was quantified using an in vitro polymicrobial biofilm model. Both the surface treatment and hydrothermal aging promoted an increase in m-phase content. Roughness values increased as a function of increasing bur grit sizes. Grinding with a coarse diamond bur resulted in significantly lower values of contact angle (p<0.05) when compared with the extra-fine and control groups, while there were no differences (p<0.05) after hydrothermal aging simulation. The CFU/biofilm results showed that neither the surface treatment nor hydrothermal aging simulation significantly affected the bacteria adherence (p>0.05). Grinding with diamond burs and hydrothermal aging modified the Y-TZP surface properties; however, these properties had no effect on the amount of bacteria adhesion on the material surface.

Structural characterization and antimicrobial properties of silver nanoparticles prepared by inverse microemulsion method.

PubMed

Wani, Irshad A; Khatoon, Sarvari; Ganguly, Aparna; Ahmed, Jahangeer; Ahmad, Tokeer; Manzoor, Nikhat

2013-01-01

Silver nanoparticles have been synthesized in the inverse microemulsions formed using three different surfactants viz., cetyl-trimethyl ammonium bromide (CTAB), Tergitol and Triton X-100. We have done a systematic study of the effect of the surfactants on the particle size and properties of the silver nanoparticles. Microscopic studies show the formation of spheres, cubes and discs shaped silver nanostructures with the size in the range from 8 to 40 nm. Surface plasmon resonance (SPR) peak was observed around 400 nm and 500 nm. In addition to SPR some extra peaks have also been observed due to the formation of silver metal clusters. The surface area increases from 3.45 to 15.06 m(2)/g with decreasing the size of silver nanoparticles (40-8 nm). To investigate the antimicrobial activity of silver nanoparticles, the nanoparticles were tested against the yeast, Candida albicans and the bacterium, E. coli. The results suggest very good antimicrobial activity of the silver nanoparticles against the test microbes. The mode of action of the antimicrobial activity was also proposed. Copyright © 2012 Elsevier B.V. All rights reserved.

Optimization of metamorphic buffers for MBE growth of high quality AlInSb/InSb quantum structures: Suppression of hillock formation

NASA Astrophysics Data System (ADS)

Shi, Y.; Gosselink, D.; Gharavi, K.; Baugh, J.; Wasilewski, Z. R.

2017-11-01

The optimization of metamorphic buffers for InSb/AlInSb QWs grown on GaAs (0 0 1) substrates is presented. With increasing surface offcut angle towards [ 1 1 bar 0 ] direction, the interaction of spiral growth around threading dislocations (TDs) with the offcut-induced atomic steps leads to a gradual change in the morphology of the AlSb buffer from one dominated by hillocks to that exhibiting near-parallel steps, and finally to a surface with increasing number of localized depressions. With the growth conditions used, the smoothest AlSb surface morphology was obtained for the offcut angles range of 0.8-1.3°. On substrates with 0° offcut, subsequent 3 repeats of Al0.24In0.76 Sb/Al0.12In0.88 Sb interlayers reduces the TD density of AlSb buffer by a factor of 10, while 70 times reduction in the surface density of TD-related hillocks is observed. The remaining hillocks have rectangular footprint and small facet angles with respect to GaAs (0 0 1) surface: 0.4° towards [ 1 1 bar 0 ] direction and 0.7° towards [1 1 0] direction. Their triangular-shaped sidewalls with regularly spaced atomic steps show occasional extra step insertion sites, characteristic of TD outcrops. Many of the observed sidewalls are dislocation free and offer atomically smooth areas of up to 1 μm2, already suitable for high-quality InSb growth and subsequent top-down fabrication of InSb nanowires. It is proposed that the sidewalls of the remaining hillocks offer local vicinal surfaces with atomic step density optimal for suppression of TD-induced spiral growth, thus providing the important information on the exact substrate offcut needed to achieve large hillock-free and atomically smooth areas on AlInSb metamorphic buffers.

A Fundamental Classification of Atomization Processes

DTIC Science & Technology

2007-10-12

spontaneous dewetting [41, 42], the extra surface tension created by the wall contact would slow any breakdown of perforations into droplets thus...important role in the type and size of the disturbance formed. Small defects can lead to spontaneous dewetting where a perforation is formed [41, 42...Films also may ―spontaneously‖ rupture or dewet due to microscopic surface imperfections or forces on a molecular level [41, 42]. Films are

Extreme rainfall events: Learning from raingauge time series

NASA Astrophysics Data System (ADS)

Boni, G.; Parodi, A.; Rudari, R.

2006-08-01

SummaryThis study analyzes the historical records of annual rainfall maxima recorded in Northern Italy, cumulated over time windows (durations) of 1 and 24 h and considered paradigmatic descriptions of storms of both short and long duration. Three large areas are studied: Liguria, Piedmont and Triveneto (Triveneto includes the Regions of Veneto, Trentino Alto Adige and Friuli Venezia Giulia). A regional frequency analysis of annual rainfall maxima is carried out through the Two Components Extreme Value (TCEV) distribution. A hierarchical approach is used to define statistically homogeneous areas so that the definition of a regional distribution becomes possible. Thanks to the peculiar nature of the TCEV distribution, a frequency-based threshold criterion is proposed. Such criterion allows to distinguish the observed ordinary values from the observed extra-ordinary values of annual rainfall maxima. A second step of this study focuses on the analysis of the probability of occurrence of extra-ordinary events over a period of one year. Results show the existence of a four month dominant season that maximizes the number of occurrences of annual rainfall maxima. Such results also show how the seasonality of extra-ordinary events changes whenever a different duration of events is considered. The joint probability of occurrence of extreme storms of short and long duration is also analyzed. Such analysis demonstrates how the joint probability of occurrence significantly changes when all rainfall maxima or only extra-ordinary maxima are used. All results undergo a critical discussion. Such discussion seems to lead to the point that the identified statistical characteristics might represent the landmark of those mechanisms causing heavy precipitation in the analyzed regions.

The effect of patterning options on embedded memory cells in logic technologies at iN10 and iN7

NASA Astrophysics Data System (ADS)

Appeltans, Raf; Weckx, Pieter; Raghavan, Praveen; Kim, Ryoung-Han; Kar, Gouri Sankar; Furnémont, Arnaud; Van der Perre, Liesbet; Dehaene, Wim

2017-03-01

Static Random Access Memory (SRAM) cells are used together with logic standard cells as the benchmark to develop the process flow for new logic technologies. In order to achieve successful integration of Spin-Transfer Torque Magnetic Random Access Memory (STT-MRAM) as area efficient higher level embedded cache, it also needs to be included as a benchmark. The simple cell structure of STT-MRAM brings extra patterning challenges to achieve high density. The two memory types are compared in terms of minimum area and critical design rules in both the iN10 and iN7 node, with an extra focus on patterning options in iN7. Both the use of Self-Aligned Quadruple Patterning (SAQP) mandrel and spacer engineering, as well as multi-level via's are explored. These patterning options result in large area gains for the STT-MRAM cell and moreover determine which cell variant is the smallest.

The effect of early life stress on the cognitive phenotype of children with an extra X chromosome (47,XXY/47,XXX).

PubMed

van Rijn, Sophie; Barneveld, Petra; Descheemaeker, Mie-Jef; Giltay, Jacques; Swaab, Hanna

2018-02-01

Studies on gene-environment interactions suggest that some individuals may be more susceptible to life adversities than others due to their genetic profile. This study assesses whether or not children with an extra X chromosome are more vulnerable to the negative impact of early life stress on cognitive functioning than typically-developing children. A total of 50 children with an extra X chromosome and 103 non-clinical controls aged 9 to 18 years participated in the study. Cognitive functioning in domains of language, social cognition and executive functioning were assessed. Early life stress was measured with the Questionnaire of Life Events. High levels of early life stress were found to be associated with compromised executive functioning in the areas of mental flexibility and inhibitory control, irrespective of group membership. In contrast, the children with an extra X chromosome were found to be disproportionally vulnerable to deficits in social cognition on top of executive dysfunction, as compared to typically-developing children. Within the extra X group the number of negative life events is significantly correlated with more problems in inhibition, mental flexibility and social cognition. It is concluded that children with an extra X chromosome are vulnerable to adverse life events, with social cognition being particularly impacted in addition to the negative effects on executive functioning. The findings that developmental outcome is codependent on early environmental factors in genetically vulnerable children also underscores opportunities for training and support to positively influence the course of development.

Isolated, extra-articular neck and shaft fractures of the 4th and 5th metacarpals: a comparison of transverse and bouquet (intra-medullary) pinning in 67 patients.

PubMed

Sletten, I N; Nordsletten, L; Husby, T; Ødegaard, R A; Hellund, J C; Kvernmo, H D

2012-06-01

Although extra-articular metacarpal fractures are common, there is no consensus on the mode of treatment. We evaluated the outcome in 67 patients operated for isolated, extra-articular fractures in the neck or shaft of the ulnar two metacarpals 28 months post-operatively. There were 22 bouquet (intra-medullary) pinnings and 45 transverse pinnings; 11 were lost to follow-up. Overall, hand function was good, and no difference was detected between the two methods (QuickDASH, grip strength, range of motion, VAS pain and VAS satisfaction). Many patients suffered complications: 12% had a superficial infection (all treated with transverse pinning with wires left exposed); 39% had some impairment in skin sensation; 29% reported cold intolerance; and 10% had other complications. Due to the potential risk of a secondary fracture of the neighbouring metacarpal after transverse pinning, we recommend bouquet (intra-medullary) pinning. We also recommend burying wires beneath the skin surface to avoid infection.

Altered figure-ground perception in monkeys with an extra-striate lesion.

PubMed

Supèr, Hans; Lamme, Victor A F

2007-11-05

The visual system binds and segments the elements of an image into coherent objects and their surroundings. Recent findings demonstrate that primary visual cortex is involved in this process of figure-ground organization. In the primary visual cortex the late part of a neural response to a stimulus correlates with figure-ground segregation and perception. Such a late onset indicates an involvement of feedback projections from higher visual areas. To investigate the possible role of feedback in figure-ground perception we removed dorsal extra-striate areas of the monkey visual cortex. The findings show that figure-ground perception is reduced when the figure is presented in the lesioned hemifield and perception is normal when the figure appeared in the intact hemifield. In conclusion, our observations show the importance for recurrent processing in visual perception.

Catalytic fast pyrolysis of biomass impregnated with potassium phosphate in a hydrogen atmosphere for the production of phenol and activated carbon

NASA Astrophysics Data System (ADS)

Lu, Qiang; Zhang, Zhen-xi; Wang, Xin; Guo, Hao-qiang; Cui, Min-shu; Yang, Yong-ping

2018-02-01

A new technique was proposed to co-produce phenol and activated carbon (AC) from catalytic fast pyrolysis of biomass impregnated with K3PO4 in a hydrogen atmosphere, followed by activation of the pyrolytic solid residues. Lab-scale catalytic fast pyrolysis experiments were performed to quantitatively determine the pyrolytic product distribution, as well as to investigate the effects of several factors on the phenol production, including pyrolysis atmosphere, catalyst type, biomass type, catalytic pyrolysis temperature, and catalyst impregnation content. In addition, the pyrolytic solid residues were activated to prepare ACs with high specific surface areas. The results indicated that phenol could be obtained due to the synergistic effects of K3PO4 and hydrogen atmosphere, with the yield and selectivity reaching 5.3 wt% and 17.8% from catalytic fast pyrolysis of poplar wood with 8 wt% K3PO4 at 550 oC in a hydrogen atmosphere. This technique was adaptable to different woody materials for phenol production. Moreover, gas product generated from the pyrolysis process was feasible to be recycled to provide the hydrogen atmosphere, instead of extra hydrogen supply. In addition, the pyrolytic solid residue was suitable for AC preparation, using CO2 activation method, the specific surface area was as high as 1605 m2/g.

Catalytic Fast Pyrolysis of Biomass Impregnated with Potassium Phosphate in a Hydrogen Atmosphere for the Production of Phenol and Activated Carbon

PubMed Central

Lu, Qiang; Zhang, Zhen-xi; Wang, Xin; Guo, Hao-qiang; Cui, Min-shu; Yang, Yong-ping

2018-01-01

A new technique was proposed to co-produce phenol and activated carbon (AC) from catalytic fast pyrolysis of biomass impregnated with K3PO4 in a hydrogen atmosphere, followed by activation of the pyrolytic solid residues. Lab-scale catalytic fast pyrolysis experiments were performed to quantitatively determine the pyrolytic product distribution, as well as to investigate the effects of several factors on the phenol production, including pyrolysis atmosphere, catalyst type, biomass type, catalytic pyrolysis temperature, and catalyst impregnation content. In addition, the pyrolytic solid residues were activated to prepare ACs with high specific surface areas. The results indicated that phenol could be obtained due to the synergistic effects of K3PO4 and hydrogen atmosphere, with the yield and selectivity reaching 5.3 wt% and 17.8% from catalytic fast pyrolysis of poplar wood with 8 wt% K3PO4 at 550°C in a hydrogen atmosphere. This technique was adaptable to different woody materials for phenol production. Moreover, gas product generated from the pyrolysis process was feasible to be recycled to provide the hydrogen atmosphere, instead of extra hydrogen supply. In addition, the pyrolytic solid residue was suitable for AC preparation, using CO2 activation method, the specific surface area was as high as 1,605 m2/g. PMID:29515994

Catalytic Fast Pyrolysis of Biomass Impregnated with Potassium Phosphate in a Hydrogen Atmosphere for the Production of Phenol and Activated Carbon.

PubMed

Lu, Qiang; Zhang, Zhen-Xi; Wang, Xin; Guo, Hao-Qiang; Cui, Min-Shu; Yang, Yong-Ping

2018-01-01

A new technique was proposed to co-produce phenol and activated carbon (AC) from catalytic fast pyrolysis of biomass impregnated with K 3 PO 4 in a hydrogen atmosphere, followed by activation of the pyrolytic solid residues. Lab-scale catalytic fast pyrolysis experiments were performed to quantitatively determine the pyrolytic product distribution, as well as to investigate the effects of several factors on the phenol production, including pyrolysis atmosphere, catalyst type, biomass type, catalytic pyrolysis temperature, and catalyst impregnation content. In addition, the pyrolytic solid residues were activated to prepare ACs with high specific surface areas. The results indicated that phenol could be obtained due to the synergistic effects of K 3 PO 4 and hydrogen atmosphere, with the yield and selectivity reaching 5.3 wt% and 17.8% from catalytic fast pyrolysis of poplar wood with 8 wt% K 3 PO 4 at 550°C in a hydrogen atmosphere. This technique was adaptable to different woody materials for phenol production. Moreover, gas product generated from the pyrolysis process was feasible to be recycled to provide the hydrogen atmosphere, instead of extra hydrogen supply. In addition, the pyrolytic solid residue was suitable for AC preparation, using CO 2 activation method, the specific surface area was as high as 1,605 m 2 /g.

Structural Response of the Earth's Crust to an Extra-Terrestrial Source of Stress by Identifying its Characteristic Pattern

NASA Astrophysics Data System (ADS)

Dasgupta, B.

2016-12-01

The earth's crust is a geodynamic realm, which is constantly evolving. Due to its dynamic nature, the crust is constantly being subjected to remodelling. The earth's crustal response to stress is a result of isostatic compensation. The crust is also a living proof of yesteryears' dynamics. Extra-terrestrial agents of deformation refers to meteorites, asteroids etc. These are catastrophic events that influence a larger area (considering larger impact bodies). They effect the crust from outside, hence leave behind very specific structural signatures.Consider an extra-terrestrial object impacting the earth's crust. The problem can be broken down into 3 parts: Pre Impact (kinematics of the object and nature of surface of impact); Syn Impact (dissipation of energy and formation of crater); and Post Impact (structural response, geophysical anomalies and effect on biota)Upon impact, the projectile penetrates the earth's crust to a depth of twice its diameter. Shock waves generated due impact propagate in all possible directions. The reflected waves cause complete melting and vaporization of the impact body. At the same time, increased internal energy of the system melts the target rock. Depending on the thickness and density of crustal matter, its' interaction with the mantle is determined. Data collection from such impact sites is the first step towards its theoretical modeling. Integrating geophysical (seismic, magnetic), paleomagnetic, geochemical and geo-chronological data one can determine the kinematic parameters that governed the event. A working model that illustrates the crustal responses to extraterrestrial stress of extreme magnitude cannot be qualitative. Hence the most fundamental thing at this point is quantification of these parameters. The variables form a `mass-energy equation', a simple theorem in Classical Physics. This project is directed to give the equation its shape. The equation will be the foundation on which the simulation model will rest. Mass energy equation for Hyper velocity bolide impact mechanics: E1 + E2 = E3 + E4 + E5)

Embryonic toxico-pathological effects of meglumine antimoniate using a chick embryo model.

PubMed

Khosravi, Ahmad; Sharifi, Iraj; Tavakkoli, Hadi; Derakhshanfar, Amin; Keyhani, Ali Reza; Salari, Zohreh; Mosallanejad, Seyedeh Saedeh; Bamorovat, Mehdi

2018-01-01

Leishmaniasis is one of the diverse and neglected tropical diseases. Embryo-toxicity of drugs has always been a major concern. Chick embryo is a preclinical model relevant in the assessment of adverse effects of drugs. The current study aimed to assess embryonic histopathological disorders and amniotic fluid biochemical changes following meglumine antimoniate treatment. The alteration of vascular branching pattern in the chick's extra-embryonic membrane and exploration of molecular cues to early embryonic vasculogenesis and angiogenesis were also quantified. Embryonated chicken eggs were treated with 75 or 150 mg/kg of meglumine antimoniate. Embryo malformations, growth retardation and haemorrhages on the external body surfaces were accompanied by histopathological lesions in the brain, kidney, liver and heart in a dose-dependent manner. Significant rise occurred in the biochemical indices of alkaline phosphatase, aspartate aminotransferase, alanine aminotransferase and amylase in the amniotic fluid. Quantification of the extra-embryonic membrane vasculature showed that the anti-angiogenic and anti-vasculogenic effects of the drug were revealed by a significant decrease in fractal dimension value and mean capillary area. The relative expression levels of vascular endothelial growth factor A and vascular endothelial growth factor receptor 2 mRNA also significantly reduced. Concerns of a probable teratogenicity of meglumine antimoniate were established by data presented in this study. It is concluded that tissue lesions, amniotic fluid disturbance, altered early extra-embryonic vascular development and gene expression as well as the consecutive cascade of events, might eventually lead to developmental defects in embryo following meglumine antimoniate treatment. Therefore, the use of meglumine antimoniate during pregnancy should be considered as potentially embryo-toxic. Hence, physicians should be aware of such teratogenic effects and limit the use of this drug during the growing period of the fetus, particularly in rural communities. Further pharmaceutical investigations are crucial for planning future strategies.

Efficacy of simple short-term in vitro assays for predicting the potential of metal oxide nanoparticles to cause pulmonary inflammation.

PubMed

Lu, Senlin; Duffin, Rodger; Poland, Craig; Daly, Paul; Murphy, Fiona; Drost, Ellen; Macnee, William; Stone, Vicki; Donaldson, Ken

2009-02-01

There has been concern regarding risks from inhalation exposure to nanoparticles (NPs). The large number of particles requiring testing means that alternative approaches to animal testing are needed. We set out to determine whether short-term in vitro assays that assess intrinsic oxidative stress potential and membrane-damaging potency of a panel of metal oxide NPs can be used to predict their inflammogenic potency. For a panel of metal oxide NPs, we investigated intrinsic free radical generation, oxidative activity in an extracellular environment, cytotoxicity to lung epithelial cells, hemolysis, and inflammation potency in rat lungs. All exposures were carried out at equal surface area doses. Only nickel oxide (NiO) and alumina 2 caused significant lung inflammation when instilled into rat lungs at equal surface area, suggesting that these two had extra surface reactivity. We observed significant free radical generation with 4 of 13 metal oxides, only one of which was inflammogenic. Only 3 of 13 were significantly hemolytic, two of which were inflammogenic. Potency in generating free radicals in vitro did not predict inflammation, whereas alumina 2 had no free radical activity but was inflammogenic. The hemolysis assay was correct in predicting the proinflammatory potential of 12 of 13 of the particles examined. Using a battery of simple in vitro tests, it is possible to predict the inflammogenicity of metal oxide NPs, although some false-positive results are likely. More research using a larger panel is needed to confirm the efficacy and generality of this approach for metal oxide NPs.

Theoretical Design and Experimental Realization of Quasi Single Electron Enhancement in Plasmonic Catalysis.

PubMed

Wang, Jiale; Alves, Tiago V; Trindade, Fabiane J; de Aquino, Caroline B; Pieretti, Joana C; Domingues, Sergio H; Ando, Romulo A; Ornellas, Fernando R; Camargo, Pedro H C

2015-11-23

By a combination of theoretical and experimental design, we probed the effect of a quasi-single electron on the surface plasmon resonance (SPR)-mediated catalytic activities of Ag nanoparticles. Specifically, we started by theoretically investigating how the E-field distribution around the surface of a Ag nanosphere was influenced by static electric field induced by one, two, or three extra fixed electrons embedded in graphene oxide (GO) next to the Ag nanosphere. We found that the presence of the extra electron(s) changed the E-field distributions and led to higher electric field intensities. Then, we experimentally observed that a quasi-single electron trapped at the interface between GO and Ag NPs in Ag NPs supported on graphene oxide (GO-Ag NPs) led to higher catalytic activities as compared to Ag and GO-Ag NPs without electrons trapped at the interface, representing the first observation of catalytic enhancement promoted by a quasi-single electron. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Surface extra-vehicular activity emergency scenario management: Tools, procedures, and geologically related implications

NASA Astrophysics Data System (ADS)

Zea, Luis; Diaz, Alejandro R.; Shepherd, Charles K.; Kumar, Ranganathan

2010-07-01

Extra-vehicular activities (EVAs) are an essential part of human space exploration, but involve inherently dangerous procedures which can put crew safety at risk during a space mission. To help mitigate this risk, astronauts' training programs spend substantial attention on preparing for surface EVA emergency scenarios. With the help of two Mars Desert Research Station (MDRS) crews (61 and 65), wearing simulated spacesuits, the most important of these emergency scenarios were examined at three different types of locations that geologically and environmentally resemble lunar and Martian landscapes. These three platforms were analyzed geologically as well as topographically (utilizing a laser range finder with slope estimation capabilities and a slope determination software). Emergency scenarios were separated into four main groups: (1) suit issues, (2) general physiological, (3) attacks and (4) others. Specific tools and procedures were developed to address each scenario. The tools and processes were tested in the field under Mars-analog conditions with the suited subjects for feasibility and speed of execution.

Aerosol Source Attributions and Source-Receptor Relationships Across the Northern Hemisphere

NASA Technical Reports Server (NTRS)

Bian, Huisheng; Chin, Mian; Kucsera, Tom; Pan, Xiaohua; Darmenov, Anton; Colarco, Peter; Torres, Omar; Shults, Michael

2014-01-01

Emissions and long-range transport of air pollution pose major concerns on air quality and climate change. To better assess the impact of intercontinental transport of air pollution on regional and global air quality, ecosystems, and near-term climate change, the UN Task Force on Hemispheric Transport of Air Pollution (HTAP) is organizing a phase II activity (HTAP2) that includes global and regional model experiments and data analysis, focusing on ozone and aerosols. This study presents the initial results of HTAP2 global aerosol modeling experiments. We will (a) evaluate the model results with surface and aircraft measurements, (b) examine the relative contributions of regional emission and extra-regional source on surface PM concentrations and column aerosol optical depth (AOD) over several NH pollution and dust source regions and the Arctic, and (c) quantify the source-receptor relationships in the pollution regions that reflect the sensitivity of regional aerosol amount to the regional and extra-regional emission reductions.

Wedge disclination dipole in an embedded nanowire within the surface/interface elasticity

NASA Astrophysics Data System (ADS)

Shodja, Hossein M.; Rezazadeh-Kalehbasti, Shaghayegh; Gutkin, Mikhail Yu

2013-12-01

The elastic behavior of an arbitrary oriented wedge disclination dipole located inside a nanowire, which in turn is embedded in an infinite matrix, is studied within the surface/interface theory of elasticity. The corresponding boundary value problem is provided using complex potential functions. The potential functions are defined through modeling the wedge disclination in terms of an equivalent distribution of edge dislocations. The interface effects on the stress field and strain energy of the disclination dipole and image forces acting on it, the influence of relative shear moduli of the nanowire and the matrix, as well as the different characteristics of the interface are studied thoroughly. It is shown that the positive interface modulus leads to increased strain energy and extra repulsive forces on the disclination dipole. The noticeable effect of the negative interface modulus is the non-classical oscillations in the stress field of the disclination dipole and an extra attractive image force on it.

Hydration of excess electrons trapped in charge pockets on molecular surfaces

NASA Astrophysics Data System (ADS)

Jalbout, Abraham F.; Del Castillo, R.; Adamowicz, Ludwik

2007-01-01

In this work we strive to design a novel electron trap located on a molecular surface. The process of electron trapping involves hydration of the trapped electron. Previous calculations on surface electron trapping revealed that clusters of OH groups can form stable hydrogen-bonded networks on one side of a hydrocarbon surface (i.e. cyclohexane sheets), while the hydrogen atoms on the opposite side of the surface form pockets of positive charge that can attract extra negative charge. The excess electron density on such surfaces can be further stabilized by interactions with water molecules. Our calculations show that these anionic systems are stable with respect to vertical electron detachment (VDE).

EoR Foregrounds: the Faint Extragalactic Radio Sky

NASA Astrophysics Data System (ADS)

Prandoni, Isabella

2018-05-01

A wealth of new data from upgraded and new radio interferometers are rapidly improving and transforming our understanding of the faint extra-galactic radio sky. Indeed the mounting statistics at sub-mJy and μJy flux levels is finally allowing us to get stringent observational constraints on the faint radio population and on the modeling of its various components. In this paper I will provide a brief overview of the latest results in areas that are potentially important for an accurate treatment of extra-galactic foregrounds in experiments designed to probe the Epoch of Reionization.

Characterization of restricted area searching behavior following consumption of prey and non-prey food in a cursorial spider, Hibana futilis

USDA-ARS?s Scientific Manuscript database

Cursorial spiders are important predators of crop pests in a variety of agricultural systems. Their survivorship, growth, and fecundity can be enhanced by the consumption of extra-floral nectar. We recently showed that Hibana futilis Banks (Araneae:Anyphaenidae) engages in restricted area search f...

Pay Cable: A Viable Advertising Medium?

ERIC Educational Resources Information Center

Krugman, Dean M.; Barban, Arnold M.

Cable television, which cannot only clarify local signals to weak signal areas but can also bring in distant signals to areas which have been receiving few signals, has the capacity to present special television programs to customers for extra fees. The number of pay cable subscribers is growing and industry projections are that it will reach 20…

Data Analysis Techniques for a Lunar Surface Navigation System Testbed

NASA Technical Reports Server (NTRS)

Chelmins, David; Sands, O. Scott; Swank, Aaron

2011-01-01

NASA is interested in finding new methods of surface navigation to allow astronauts to navigate on the lunar surface. In support of the Vision for Space Exploration, the NASA Glenn Research Center developed the Lunar Extra-Vehicular Activity Crewmember Location Determination System and performed testing at the Desert Research and Technology Studies event in 2009. A significant amount of sensor data was recorded during nine tests performed with six test subjects. This paper provides the procedure, formulas, and techniques for data analysis, as well as commentary on applications.

Theoretical algorithms for satellite-derived sea surface temperatures

NASA Astrophysics Data System (ADS)

Barton, I. J.; Zavody, A. M.; O'Brien, D. M.; Cutten, D. R.; Saunders, R. W.; Llewellyn-Jones, D. T.

1989-03-01

Reliable climate forecasting using numerical models of the ocean-atmosphere system requires accurate data sets of sea surface temperature (SST) and surface wind stress. Global sets of these data will be supplied by the instruments to fly on the ERS 1 satellite in 1990. One of these instruments, the Along-Track Scanning Radiometer (ATSR), has been specifically designed to provide SST in cloud-free areas with an accuracy of 0.3 K. The expected capabilities of the ATSR can be assessed using transmission models of infrared radiative transfer through the atmosphere. The performances of several different models are compared by estimating the infrared brightness temperatures measured by the NOAA 9 AVHRR for three standard atmospheres. Of these, a computationally quick spectral band model is used to derive typical AVHRR and ATSR SST algorithms in the form of linear equations. These algorithms show that a low-noise 3.7-μm channel is required to give the best satellite-derived SST and that the design accuracy of the ATSR is likely to be achievable. The inclusion of extra water vapor information in the analysis did not improve the accuracy of multiwavelength SST algorithms, but some improvement was noted with the multiangle technique. Further modeling is required with atmospheric data that include both aerosol variations and abnormal vertical profiles of water vapor and temperature.

Extra-strong "floating nut"

NASA Technical Reports Server (NTRS)

Charles, J. F.; Theakston, H.

1979-01-01

Increased bearing area withstands much higher torque than previous designs. Floating nut makes it possible to fasten parts on heavy-duty equipment, such as tractors and cranes, even though they can be reached for tightening from one side only.

Anterior Inferior Iliac Spine (AIIS) and Subspine Hip Impingement.

PubMed

Carton, Patrick; Filan, David

2016-01-01

Abnormal morphology of the anterior inferior iliac spine (AIIS) and the subspine region of the acetabular rim are increasingly being recognised as a source of symptomatic extra-articular hip impingement. This review article aims to highlight important differences in the pathogenesis, clinical presentation and management of extra-articular hip impingement from both the AIIS and subspine bony regions, and the outcome following surgical intervention. A literature review was undertaken to examine the supporting evidence for AIIS and subspine hip impingement. A narrative account of the Author's professional experience in this area, including operative technique for arthroscopic correction, is also presented. Abnormal morphology of the AIIS and subspine region has been classified using cadaveric, radiological and arthroscopic means; the clinical presentation and operative treatment has been documented in several case series studies. Dual pathology is often present - recognition and treatment of both intra- and extra-articular components are necessary for good postoperative outcome. AIIS and sub-spine hip impingement should be considered as distinct pathological entities, which may also co-exist. Symptom relief can be expected following arthroscopic deformity correction with the treatment of concomitant intra-articular pathology. Failure to recognise and treat the extra-articular component may affect postoperative outcome. V.

High frequency of extra-pair paternity in an urban population of Cooper's Hawks

USGS Publications Warehouse

Rosenfield, Robert N.; Sonsthagen, Sarah A.; Stout, William C.; Talbot, Sandra L.

2015-01-01

Raptors exhibit some of the highest rates of intra-pair copulations among birds, perhaps in an attempt by males to reduce the risk of being cuckolded. Indeed, the frequency of extra-pair fertilizations reported in studies of raptors to date is relatively low (0-11.2%). Socially monogamous Cooper's Hawks (Accipiter cooperii) exhibit one of the highest copulation rates among birds, yet there are no published accounts of extra-pair copulations (or paternity). We studied a population of Cooper's Hawks in Milwaukee, Wisconsin, during three breeding seasons (2003, 2004, and 2007), examining the possible effects of age (1 yr old vs. ≥ 2 yr old), adult mass, and brood size on the frequency of extra-pair paternity (EPP). We found that 19.3% of nestlings (N = 27/140) were extra-pair young (EPY), and 34% of all broods (N = 15/44) had at least one EPY. The sires of the EPY in our study were identified for only two broods, suggesting that floater males may have engaged in extra-pair copulations with territorial females. We found that brood size was a good predictor of the occurrence of EPP (EPP) in nests, but adult mass and female age were not. To our knowledge, these possible correlates of the occurrence of EPP in raptors had not previously been investigated. Male Cooper's Hawks provide food for females during the pre-nesting period, and delivery of food is, in contrast to other raptor species, typically followed by copulation. Thus, one possible explanation of the relatively high rates of EPP in our study is that females might accept or even solicit extra-pair copulations from males other than their mates as a means of maximizing energy intake for egg production. Such behavior might be particularly likely in our study area, i.e., a food-rich urban setting with a high breeding density of Cooper's Hawks.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sava Gallis, Dorina F.; Ermanoski, Ivan; Greathouse, Jeffrey A.

Here, we present a combined experimental and Grand Canonical Monte Carlo (GCMC) modeling study on the adsorption of iodine in three classes of nanoporous materials: activated charcoals, zeolites, and metal–organic frameworks (MOFs). Iodine adsorption profiles were measured for the first time in situ, with a uniquely designed sorption apparatus. It was determined that pore size and pore environment are responsible for a dynamic adsorption profile, correlated with distinct pressure ranges. At pressures below 0.3 atm, iodine adsorption is governed by a combination of small pores and extra-framework components (e.g., Ag+ ions in the zeolite mordenite). At regimes above 0.3 atm,more » the amount of iodine gas stored relates with an increase in pore size and specific surface area. GCMC results validate the trends noted experimentally and in addition provide a measure of the strength of the adsorbate–adsorbent interactions in these materials.« less

Chitosan based nanofibers in bone tissue engineering.

PubMed

Balagangadharan, K; Dhivya, S; Selvamurugan, N

2017-11-01

Bone tissue engineering involves biomaterials, cells and regulatory factors to make biosynthetic bone grafts with efficient mineralization for regeneration of fractured or damaged bones. Out of all the techniques available for scaffold preparation, electrospinning is given priority as it can fabricate nanostructures. Also, electrospun nanofibers possess unique properties such as the high surface area to volume ratio, porosity, stability, permeability and morphological similarity to that of extra cellular matrix. Chitosan (CS) has a significant edge over other materials and as a graft material, CS can be used alone or in combination with other materials in the form of nanofibers to provide the structural and biochemical cues for acceleration of bone regeneration. Hence, this review was aimed to provide a detailed study available on CS and its composites prepared as nanofibers, and their associated properties found suitable for bone tissue engineering. Copyright © 2016 Elsevier B.V. All rights reserved.

One-Dimensional Nanostructure Field-Effect Sensors for Gas Detection

PubMed Central

Zhao, Xiaoli; Cai, Bin; Tang, Qingxin; Tong, Yanhong; Liu, Yichun

2014-01-01

Recently; one-dimensional (1D) nanostructure field-effect transistors (FETs) have attracted much attention because of their potential application in gas sensing. Micro/nanoscaled field-effect sensors combine the advantages of 1D nanostructures and the characteristic of field modulation. 1D nanostructures provide a large surface area-volume ratio; which is an outstanding advantage for gas sensors with high sensitivity and fast response. In addition; the nature of the single crystals is favorable for the studies of the response mechanism. On the other hand; one main merit of the field-effect sensors is to provide an extra gate electrode to realize the current modulation; so that the sensitivity can be dramatically enhanced by changing the conductivity when operating the sensors in the subthreshold regime. This article reviews the recent developments in the field of 1D nanostructure FET for gas detection. The sensor configuration; the performance as well as their sensing mechanism are evaluated. PMID:25090418

19. WHEELPIT AREA OF 1814 MILL WHERE JACOB PERKINS BREASTWHEEL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

19. WHEELPIT AREA OF 1814 MILL WHERE JACOB PERKINS BREASTWHEEL WAS INSTALLED AND CONTROLLED BY PAUL MOODY FLYBALL GOVERNOR, LOOKING NORTH, WITH WEST (UPSTREAM) WALL AT LEFT. EXTRA HEAVY LONGITUDINAL BEAMS ORIGINALLY SPANNED WHEELPIT AREA WITHOUT INTERNAL SUPPORTS (METAL COLUMNS IN PHOTO ARE A RECENT ADDITION). EVIDENCE OF HEADRACE ENTRANCE ARCH HAS BEEN OBLITERATED BY CONCRETE RETAINING WALL AT REAR. - Boston Manufacturing Company, 144-190 Moody Street, Waltham, Middlesex County, MA

Elimination of onchocerciasis in Ecuador: findings of post-treatment surveillance.

PubMed

Guevara, Ángel; Lovato, Raquel; Proaño, Roberto; Rodriguez-Perez, Mario A; Unnasch, Thomas; Cooper, Philip J; Guderian, Ronald H

2018-04-24

The Esmeraldas focus of onchocerciasis in Ecuador expanded geographically during the 1980s and was associated with severe ocular and skin disease. Mass drug administration (MDA) with ivermectin started in 1991, initially once but later twice a year, in the principle endemic focus followed by all satellite foci. Treatment was stopped in 2009 when entomological assessments determined that transmission of Onchocerca volvulus had been interrupted. Three years after the cessation of ivermectin treatment in 2012, as defined by the WHO guidelines for onchocerciasis elimination, blackfly collections were done in four sentinel sites in former hyperendemic areas. The presence of infective larvae in local vectors, Simulium exiguum and Simulum quadrivittatum, was assessed by detection of O. volvulus DNA by PCR. Additional flies captured in four extra-sentinel sites located in former hyper- and mesoendemic dispersed isolated areas were also assessed. The results from 68,310 captured blackflies, 40,114 from four sentinel villages in the previously hyperendemic areas (Corriente Grande, El Tigre, San Miguel on Río Cayapas and Naranjal on Río Canandé) and 28,197 from extra-sentinel locations, were all negative for the presence of O. volvulus. These extra-sentinel sites (Hualpí on Río Hoja Blanca, Capulí on Río Onzole, La Ceiba on Río Tululví and Medianía on Río Verde) were included to provide additional evidence of the impact of MDA on the transmission of O. volvulus in isolated endemic areas. Our data indicate that transmission of O. volvulus has been stopped in all endemic areas in Ecuador, including all satellite foci outside the main focus. These findings indicate that a strategy of ivermectin distribution twice a year to over 85% of the treatment-eligible population was effective in eliminating the infection from Ecuador in a focus with a highly competent primary vector, S. exiguum, and where the infection rates were equal to or greater than observed in many onchocerciasis foci in Africa.

Statistical research using the multiple regression analysis in areas of the cast hipereutectoid steel rolls manufacturing

NASA Astrophysics Data System (ADS)

Kiss, I.; Alexa, V.; Serban, S.; Rackov, M.; Čavić, M.

2018-01-01

The cast hipereutectoid steel (usually named Adamite) is a roll manufacturing destined material, having mechanical, chemical properties and Carbon [C] content of which stands between steelandiron, along-withitsalloyelements such as Nickel [Ni], Chrome [Cr], Molybdenum [Mo] and/or other alloy elements. Adamite Rolls are basically alloy steel rolls (a kind of high carbon steel) having hardness ranging from 40 to 55 degrees Shore C, with Carbon [C] percentage ranging from 1.35% until to 2% (usually between 1.2˜2.3%), the extra Carbon [C] and the special alloying element giving an extra wear resistance and strength. First of all the Adamite roll’s prominent feature is the small variation in hardness of the working surface, and has a good abrasion resistance and bite performance. This paper reviews key aspects of roll material properties and presents an analysis of the influences of chemical composition upon the mechanical properties (hardness) of the cast hipereutectoid steel rolls (Adamite). Using the multiple regression analysis (the double and triple regression equations), some mathematical correlations between the cast hipereutectoid steel rolls’ chemical composition and the obtained hardness are presented. In this work several results and evidence obtained by actual experiments are presented. Thus, several variation boundaries for the chemical composition of cast hipereutectoid steel rolls, in view the obtaining the proper values of the hardness, are revealed. For the multiple regression equations, correlation coefficients and graphical representations the software Matlab was used.

The Influence of Atomic Diffusion on Stellar Ages and Chemical Tagging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dotter, Aaron; Conroy, Charlie; Cargile, Phillip

2017-05-10

In the era of large stellar spectroscopic surveys, there is an emphasis on deriving not only stellar abundances but also the ages for millions of stars. In the context of Galactic archeology, stellar ages provide a direct probe of the formation history of the Galaxy. We use the stellar evolution code MESA to compute models with atomic diffusion—with and without radiative acceleration—and extra mixing in the surface layers. The extra mixing consists of both density-dependent turbulent mixing and envelope overshoot mixing. Based on these models we argue that it is important to distinguish between initial, bulk abundances (parameters) and current,more » surface abundances (variables) in the analysis of individual stellar ages. In stars that maintain radiative regions on evolutionary timescales, atomic diffusion modifies the surface abundances. We show that when initial, bulk metallicity is equated with current, surface metallicity in isochrone age analysis, the resulting stellar ages can be systematically overestimated by up to 20%. The change of surface abundances with evolutionary phase also complicates chemical tagging, which is the concept that dispersed star clusters can be identified through unique, high-dimensional chemical signatures. Stars from the same cluster, but in different evolutionary phases, will show different surface abundances. We speculate that calibration of stellar models may allow us to estimate not only stellar ages but also initial abundances for individual stars. In the meantime, analyzing the chemical properties of stars in similar evolutionary phases is essential to minimize the effects of atomic diffusion in the context of chemical tagging.« less

What the Medical Records Revolution Means to Your Special Child

ERIC Educational Resources Information Center

Dorsett, Tom

2008-01-01

As every exceptional parent knows, the needs of a special child are, simply put, special. For every area of life, an extra amount of thought and care must be taken--whether it is education, traveling considerations, and, especially, healthcare. However, it is in the area of healthcare that parents say they face the most challenge. For years,…

[A review on research of land surface water and heat fluxes].

PubMed

Sun, Rui; Liu, Changming

2003-03-01

Many field experiments were done, and soil-vegetation-atmosphere transfer(SVAT) models were stablished to estimate land surface heat fluxes. In this paper, the processes of experimental research on land surface water and heat fluxes are reviewed, and three kinds of SVAT model(single layer model, two layer model and multi-layer model) are analyzed. Remote sensing data are widely used to estimate land surface heat fluxes. Based on remote sensing and energy balance equation, different models such as simplified model, single layer model, extra resistance model, crop water stress index model and two source resistance model are developed to estimate land surface heat fluxes and evapotranspiration. These models are also analyzed in this paper.

Corrective osteotomy for combined intra- and extra-articular distal radius malunion.

PubMed

Buijze, Geert A; Prommersberger, Karl-Josef; González Del Pino, Juan; Fernandez, Diego L; Jupiter, Jesse B

2012-10-01

This study evaluated the functional outcome of corrective osteotomy for combined intra- and extra-articular malunions of the distal radius using multiple outcome scores. We evaluated 18 skeletally mature patients at an average of 78 months after corrective osteotomy for a combined intra- and extra-articular malunion of the distal part of the radius. The indication for osteotomy in all patients was the combination of an extra-articular deformity (≥ 15° volar or ≥ 10° dorsal angulation or ≥ 3 mm radial shortening) and intra-articular incongruity of 2 mm or greater (maximum stepoff or gap), as measured on lateral and posteroanterior radiographs. The average interval from the injury to the osteotomy was 9 months. The average maximum stepoff or gap of the articular surface before surgery was 4 mm. All 18 patients healed uneventfully and the final articular incongruity was reduced to 2 mm or less. Final range of motion and grip strength significantly improved, averaging 89% and 84% of the uninjured side and 185% and 241% of the preoperative measures, respectively. The rate of excellent or good results was 72% according to the validated rating system Mayo Modified Wrist Score, and 89% according to the unvalidated system of Gartland and Werley. The mean Disabilities of the Arm, Shoulder, and Hand score was 11, which corresponds to mild perceived disability. Of the 18 cases, 11 normalized upper limb function. Five patients had complications; all were successfully treated. According to the rating system of Knirk and Jupiter, 4 had grade 1 and 1 had grade 2 osteoarthritis of the radiocarpal joint on radiographs. Two of those patients reported occasional mild pain. Radiographic osteoarthritis did not correlate with strength, motion, and wrist scores. Outcomes of corrective osteotomy for combined intra- and extra-articular malunions were comparable to those of osteotomy for isolated intra- and extra-articular malunions. A successful corrective osteotomy for the treatment of complex intra- and extra-articular distal radius malunions can improve wrist function. Therapeutic IV. Copyright © 2012 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

30 CFR 20.9 - Class 2 lamps.

Code of Federal Regulations, 2012 CFR

2012-07-01

... of extra-heavy glass to withstand pick blows, and be adequately protected by shrouds or by an... permit assembly, the flanges comprising the joints between parts shall have surfaces with metal-to-metal contact, except enclosures requiring glass, in which case glass-to-metal joints are permitted. Gaskets, if...

Energy from the Ground Up.

ERIC Educational Resources Information Center

Sailer, Fred

1992-01-01

A closed-loop geothermal heating system in a Minnesota school uses the earth's temperature as a counterweight to the extremes of temperature on the surface and in the school. The system is expected to recoup its extra investment in fewer than five years of service. Cites statistics concerning energy management in schools. (MLF)

Reductive surface synthesis of gold nanoparticles on silicate glass and their biochemical sensor applicationsa

PubMed Central

Li, M.; Kim, D.-P.; Jeong, G.-Y.; Seo, D.-K.; Park, C.-P.

2012-01-01

Gold nanoparticles (Au NPs) were directly synthesized on the surface of polyvinylsilazane (PVSZ, -[(vinyl)SiH-NH2]-) without use of extra reductive additives. The reductive Si-H functional groups on the surface of cured PVSZ acted as surface bound reducing agents to form gold metal when contacted with an aqueous Au precursor (HAuCl4) solution, leading to formation of Au NPs adhered to silicate glass surface. The Au NPs-silicate platforms were preliminarily tested to detect Rhodamine B (1 μM) by surface enhanced Raman scattering. Furthermore, gold microelectrode obtained by post-chemical plating was used as an integrated amperometric detection element in the polydimethylsilane-glass hybrid microfluidic chip. PMID:24324531

Extra-Mediterranean refugia: The rule and not the exception?

PubMed Central

2012-01-01

Some decades ago, biogeographers distinguished three major faunal types of high importance for Europe: (i) Mediterranean elements with exclusive glacial survival in the Mediterranean refugia, (ii) Siberian elements with glacial refugia in the eastern Palearctic and only postglacial expansion to Europe and (iii) arctic and/or alpine elements with large zonal distributions in the periglacial areas and postglacial retreat to the North and/or into the high mountain systems. Genetic analyses have unravelled numerous additional refugia both of continental and Mediterranean species, thus strongly modifying the biogeographical view of Europe. This modified notion is particularly true for the so-called Siberian species, which in many cases have not immigrated into Europe during the postglacial period, but most likely have survived the last, or even several glacial phases, in extra-Mediterranean refugia in some climatically favourable but geographically limited areas of southern Central and Eastern Europe. Recently, genetic analyses revealed that typical Mediterranean species have also survived the Last Glacial Maximum in cryptic northern refugia (e.g. in the Carpathians or even north of the Alps) in addition to their Mediterranean refuge areas. PMID:22953783

A two-stage series diode for intense large-area moderate pulsed X rays production.

PubMed

Lai, Dingguo; Qiu, Mengtong; Xu, Qifu; Su, Zhaofeng; Li, Mo; Ren, Shuqing; Huang, Zhongliang

2017-01-01

This paper presents a method for moderate pulsed X rays produced by a series diode, which can be driven by high voltage pulse to generate intense large-area uniform sub-100-keV X rays. A two stage series diode was designed for Flash-II accelerator and experimentally investigated. A compact support system of floating converter/cathode was invented, the extra cathode is floating electrically and mechanically, by withdrawing three support pins several milliseconds before a diode electrical pulse. A double ring cathode was developed to improve the surface electric field and emission stability. The cathode radii and diode separation gap were optimized to enhance the uniformity of X rays and coincidence of the two diode voltages based on the simulation and theoretical calculation. The experimental results show that the two stage series diode can work stably under 700 kV and 300 kA, the average energy of X rays is 86 keV, and the dose is about 296 rad(Si) over 615 cm 2 area with uniformity 2:1 at 5 cm from the last converter. Compared with the single diode, the average X rays' energy reduces from 132 keV to 88 keV, and the proportion of sub-100-keV photons increases from 39% to 69%.

Stem photosynthesis and hydraulics are coordinated in desert plant species.

PubMed

Ávila-Lovera, Eleinis; Zerpa, Antonio J; Santiago, Louis S

2017-12-01

Coordination between stem photosynthesis and hydraulics in green-stemmed desert plants is important for understanding the physiology of stem photosynthesis and possible drought responses. Plants with photosynthetic stems have extra carbon gain that can help cope with the detrimental effects of drought. We studied photosynthetic, hydraulic and functional traits of 11 plant species with photosynthetic stems from three California desert locations. We compared relationships among traits between wet and dry seasons to test the effect of seasonality on these relationships. Finally, we compared stem trait relationships with analogous relationships in the leaf economics spectrum. We found that photosynthetic and hydraulic traits are coordinated in photosynthetic stems. The slope or intercept of all trait relationships was mediated by seasonality. The relationship between mass-based stem photosynthetic CO 2 assimilation rate (A mass ) and specific stem area (SSA; stem surface area to dry mass ratio) was statistically indistinguishable from the leaf economics spectrum. Our results indicate that photosynthetic stems behave like leaves in the coordination of multiple traits related to carbon gain, water movement and water loss. Because of the similarity of the stem A mass -SSA relationship to the leaf A mass -specific leaf area relationship, we suggest the existence of a photosynthetic stem economic spectrum. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

A functional magnetic resonance imaging study mapping the episodic memory encoding network in temporal lobe epilepsy

PubMed Central

Sidhu, Meneka K.; Stretton, Jason; Winston, Gavin P.; Bonelli, Silvia; Centeno, Maria; Vollmar, Christian; Symms, Mark; Thompson, Pamela J.; Koepp, Matthias J.

2013-01-01

Functional magnetic resonance imaging has demonstrated reorganization of memory encoding networks within the temporal lobe in temporal lobe epilepsy, but little is known of the extra-temporal networks in these patients. We investigated the temporal and extra-temporal reorganization of memory encoding networks in refractory temporal lobe epilepsy and the neural correlates of successful subsequent memory formation. We studied 44 patients with unilateral temporal lobe epilepsy and hippocampal sclerosis (24 left) and 26 healthy control subjects. All participants performed a functional magnetic resonance imaging memory encoding paradigm of faces and words with subsequent out-of-scanner recognition assessments. A blocked analysis was used to investigate activations during encoding and neural correlates of subsequent memory were investigated using an event-related analysis. Event-related activations were then correlated with out-of-scanner verbal and visual memory scores. During word encoding, control subjects activated the left prefrontal cortex and left hippocampus whereas patients with left hippocampal sclerosis showed significant additional right temporal and extra-temporal activations. Control subjects displayed subsequent verbal memory effects within left parahippocampal gyrus, left orbitofrontal cortex and fusiform gyrus whereas patients with left hippocampal sclerosis activated only right posterior hippocampus, parahippocampus and fusiform gyrus. Correlational analysis showed that patients with left hippocampal sclerosis with better verbal memory additionally activated left orbitofrontal cortex, anterior cingulate cortex and left posterior hippocampus. During face encoding, control subjects showed right lateralized prefrontal cortex and bilateral hippocampal activations. Patients with right hippocampal sclerosis showed increased temporal activations within the superior temporal gyri bilaterally and no increased extra-temporal areas of activation compared with control subjects. Control subjects showed subsequent visual memory effects within right amygdala, hippocampus, fusiform gyrus and orbitofrontal cortex. Patients with right hippocampal sclerosis showed subsequent visual memory effects within right posterior hippocampus, parahippocampal and fusiform gyri, and predominantly left hemisphere extra-temporal activations within the insula and orbitofrontal cortex. Correlational analysis showed that patients with right hippocampal sclerosis with better visual memory activated the amygdala bilaterally, right anterior parahippocampal gyrus and left insula. Right sided extra-temporal areas of reorganization observed in patients with left hippocampal sclerosis during word encoding and bilateral lateral temporal reorganization in patients with right hippocampal sclerosis during face encoding were not associated with subsequent memory formation. Reorganization within the medial temporal lobe, however, is an efficient process. The orbitofrontal cortex is critical to subsequent memory formation in control subjects and patients. Activations within anterior cingulum and insula correlated with better verbal and visual subsequent memory in patients with left and right hippocampal sclerosis, respectively, representing effective extra-temporal recruitment. PMID:23674488

Optical 3D scans for orthodontic diagnostics performed on full-arch impressions. Completeness of surface structure representation.

PubMed

Vogel, Annike B; Kilic, Fatih; Schmidt, Falko; Rübel, Sebastian; Lapatki, Bernd G

2015-11-01

The purpose of this work was to evaluate the completeness of surface structure representation offered by full-arch impression scans in different situations of tooth (mal)alignment and whether this completeness could be improved by performing rescans on the same impressions reduced sequentially to different levels of gingival height and by adding extra single scans to the number of single scans recommended by the manufacturer. Three pairs of full-arch resin models were used as reference, characterized either by normal occlusion, by anterior diastematic protrusion (and edentulous spaces in the lower posterior segments), or by anterior crowding. An alginate impression of each arch was taken and digitized with a structured-light scanner, followed by three rescans with the impression cut back to 10, 5, and 1 mm of gingival height. Both the initial scan and the rescans were performed both with 19 basic single scans and with 10 extra single scans. Each impression scan was analyzed for quantitative completeness relative to its homologous direct scan of the original resin model. In addition, the topography of voids in the resultant digital model was assessed by visual inspection. Compared to the homologous reference scans of the original resin models, completeness of the original impression scans--in the absence of both gingival cutback and extra single scans--was 97.23 ± 0.066% in the maxilla or 95.72 ± 0.070% in the mandible with normal occlusion, 91.11 ± 0.132% or 96.07 ± 0.109% in the arches with anterior diastematic protrusion, and 98.24 ± 0.085% or 93.39 ± 0.146% in those with anterior crowding. Gingival cutback and extra single scans were found to improve these values up to 100.35 ± 0.066% or 99.53 ± 0.070% in the arches with normal occlusion, 91.77 ± 0.132% or 97.95 ± 0.109% in those with anterior diastematic protrusion, and 98.59 ± 0.085% or 98.96 ± 0.146% in those with anterior crowding. In strictly quantitative terms, the impression scans did capture relatively large percentages of the total surface. However, the topographic examinations revealed that regions essential for orthodontic model analysis were missing. The malocclusion models were particularly affected. Thus, impression scans performed with structured-light scanners cannot replace scans of positive casts for diagnostic use in orthodontics.

Supercapacitor Electrode Materials from Highly Porous Carbon Nanofibers with Tailored Pore Distributions

NASA Astrophysics Data System (ADS)

Chathurika Abeykoon, Nimali

Environmental and human health risks associated with the traditional methods of energy production (e.g., oil and gas) and intermittency and uncertainty of renewable sources (e.g., solar and wind) have led to exploring effective and alternative energy sources to meet the growing energy demands. Electricity based on energy storage devices are the most promising solutions for realization of these objectives. Among the energy storage devices, electrochemical double layer capacitors (EDLCs) or supercapacitors have become an attractive research interest due to their outstanding performance, especially high power densities, long cycle life and rapid charge and discharge times, which enables them to utilize in many applications including consumer electronics and transportation, where high power is needed. However, low energy density of supercapacitors is a major obstacle to compete with the commercially existing high energy density energy storage device such as batteries. The fabrication of advanced electrodes materials with very high surface area from novel precursors and utilization of electrolytes with higher operating voltages are essential to enhance energy density of supercapacitors. In this work, carbon nanofibers (CNFs) from different polymer precursors with new fabrication techniques are explored to develop highly porous carbon with tailored pore distributions to match with employed ionic liquid electrolytes (which possess high working voltages), to realize high energy storage capability. Novel electrode materials derived from electrospun immiscible polymer blends and synthesized copolymers and terpolymers were described. Pore distributions of CNFs were tailored by varying the composition of polymers in immiscible blends or varying the monomer ratios of copolymer or terpolymers. Chapter 1 gives the detailed introduction of supercapacitors including history and storage principle of EDLCs, fabrication of carbon nanofiber based electrodes and electrolytes employed for EDLCs. It also explains the necessity and the advantages of tailored high surface area nanofibers as an electrode materials for supercapacitors. Chapter 2 describes the preparation of high surface area carbon nanofibers using polymer blends containing PAN and PMMA and introduces an effective and simple strategy to improve the surface area of CNFs by using a sacrificial polymer, PMMA. Chapter 3 describes blending of high fractional free volume polymer, 6FDA-DAM: DABA (3:2) into PBI to increase surface area and by using the higher etch rate of 6FDA-DAM: DABA in the blend to optimize pore distribution of CNFs. Chapter 4 introduces a novel approach to increase surface area of CNFs without any physical or chemical activation by using an in situ porogen containing copolymer P(AN-co-IA). The concept developed here avoids unnecessary and complex extra activation steps when fabricating carbon nanofibers which leads to lower char yield and uncontrollable pore sizes. Chapter 5 describes enhancement of surface area by using terpolymer P(AN-VIM-IA) to develop a new precursor. This approach is further advantageous since terpolymer can combine superior electrochemical properties of homopolymer, PAN and P(AN- co-IA) and P(AN-co-VIM). Chapter 6 describes the use of commercially available small molecule compatibilizer 2-MI to tailor pore architecture of carbon fiber derived from the immiscible blend of PBI/6FDD to match with the ion sizes of ionic liquid electrolytes thereby increasing the surface area of the CNFs that is accessible to electrolytes.

An Investigation into the Prioritization of Air Force Civil Engineering Structural Maintenance Decisions.

DTIC Science & Technology

1981-09-01

Systems and Logistics AREA &WORIUNITNUMUERS Air Force Institute of Technology WPAFB OH 11. CONTROLLING OFFICE NAME AND ADDRESS 12. REPORT DATE Department of...consists of a cursory glance at structural members located in easily accessable areas and many critical parts of the facility go unnoticed. A counterpart...too far, If inspection teams can be persuaded to take a little extra time to inspect obscure areas of a structural support system and educated with

Potential Seasonal Predictability for Winter Storms over Europe

NASA Astrophysics Data System (ADS)

Wild, Simon; Befort, Daniel J.; Leckebusch, Gregor C.

2017-04-01

Reliable seasonal forecasts of strong extra-tropical cyclones and windstorms would have great social and economical benefits, as these events are the most costly natural hazards over Europe. In a previous study we have shown good agreement of spatial climatological distributions of extra-tropical cyclones and wind storms in state-of-the-art multi-member seasonal prediction systems with reanalysis. We also found significant seasonal prediction skill of extra-tropical cyclones and windstorms affecting numerous European countries. We continue this research by investigating the mechanisms and precursor conditions (primarily over the North Atlantic) on a seasonal time scale leading to enhanced extra-tropical cyclone activity and winter storm frequency over Europe. Our results regarding mechanisms show that an increased surface temperature gradient at the western edge of the North Atlantic can be related to enhanced winter storm frequency further downstream causing for example a greater number of storms over the British Isles, as observed in winter 2013-14.The so-called "Horseshoe Index", a SST tripole anomaly pattern over the North Atlantic in the summer months can also cause a higher number of winter storms over Europe in the subsequent winter. We will show results of AMIP-type sensitivity experiments using an AGCM (ECHAM5), supporting this hypothesis. Finally we will analyse whether existing seasonal forecast systems are able to capture these identified mechanisms and precursor conditions affecting the models' seasonal prediction skill.

Non-masticatory uses of anterior teeth of Sima de los Huesos individuals (Sierra de Atapuerca, Spain).

PubMed

Lozano, Marina; Bermúdez de Castro, José M; Carbonell, Eudald; Arsuaga, Juan Luis

2008-10-01

In this study we examine the labial and occlusal surfaces of incisors and canines of hominins recovered from the Sima de los Huesos (SH), middle Pleistocene site, in order to establish the possible extra-masticatory use of anterior teeth. We have compared the microwear of these fossils with microwear from the anterior teeth of Australian Aborigines, a population characterized by ethnographic evidence of the use of their teeth as a third hand. These two samples of teeth were microscopically analyzed using Scanning Electron Microscopy (SEM). Our results support the "cultural" origin of microwear observed on fossil teeth: we conclude that the SH hominins used their anterior teeth as a "third hand" for para- or extra-masticatory activities.

Anomalous shear band characteristics and extra-deep shock-affected zone in Zr-based bulk metallic glass treated with nanosecond laser peening.

PubMed

Wei, Yanpeng; Xu, Guangyue; Zhang, Kun; Yang, Zhe; Guo, Yacong; Huang, Chenguang; Wei, Bingchen

2017-03-07

The effects of nanosecond laser peening on Zr 41 Ti 14 Cu 12.5 Ni 10 Be 22.5 metallic glass were investigated in this study. The peening treatment produced an extra-deep shock-affected zone compared to crystal metal. As opposed to the conventional shear bands, numerous arc shear bands appeared and aggregated in the vertical direction of the laser beam, forming basic units for accommodating plastic deformation. The arc shear bands exhibited short and discrete features near the surface of the material, then grew longer and fewer at deeper peened layer depths, which was closely related to the laser shock wave attenuation. An energy dissipation model was established based on Hugoniot Elastic Limit and shear band characteristics to represent the formation of an extra-deep shock-affected zone. The results presented here suggest that the bulk modification of metallic glass with a considerable affected depth is feasible. Further, they reveal that nanosecond laser peening is promising as an effective approach to tuning shear bands for improved MGs ductility.

REVIEWS OF TOPICAL PROBLEMS: Cosmological branes and macroscopic extra dimensions

NASA Astrophysics Data System (ADS)

Barvinsky, Andrei O.

2005-06-01

The idea of adding extra dimensions to the physical world — thus making the observable universe a timelike surface (or brane) embedded in a higher-dimensional space-time — is briefly reviewed, which is believed to hold serious promise for solving fundamental problems concerning the hierarchy of physical interactions and the cosmological constant. Brane localization of massless gravitons is discussed as a mechanism leading to the effective four-dimensional Einstein gravity theory on the brane in the low-energy limit. It is shown that this mechanism is a corollary of the AdS/CFT correspondence principle well-known from string theory. Inflation and other cosmological evolution scenarios induced by the local and nonlocal structures of the effective action of the gravitational brane are considered, as are the effects that enable the developing gravitational-wave astronomy to be used in the search for extra dimensions. Finally, a new approach to the cosmological constant and cosmological acceleration problems is discussed, which involves variable local and nonlocal gravitational 'constants' arising in the infrared modifications of the Einstein theory that incorporate brane-induced gravity models and models of massive gravitons.

Surface Relaxation in Protein Crystals

NASA Technical Reports Server (NTRS)

Boutet, S.; Robinson, I. K.; Hu, Z. W.; Thomas, B. R.; Chernov, A. A.

2002-01-01

Surface X-ray diffraction measurements were performed on (111) growth faces of crystals of the Cellular iron-storage protein horse spleen ferritin. Crystal Trunkation Rods (CTR) were measured. A fit of the measured profile of the CTR revealed a surface roughness of 48 +/- 4.5 A and a top layer spacing contraction of 3.9 +/- 1.5%. In addition to the peak from the CTR, the rocking curves of the crystals displayed unexpected extra peaks. Multiple-scattering is demonstrated to account for them. Future applications of the method could allow the exploration of hydration effects on the growth of protein crystals.

Compacted dimensions and singular plasmonic surfaces

NASA Astrophysics Data System (ADS)

Pendry, J. B.; Huidobro, Paloma Arroyo; Luo, Yu; Galiffi, Emanuele

2017-11-01

In advanced field theories, there can be more than four dimensions to space, the excess dimensions described as compacted and unobservable on everyday length scales. We report a simple model, unconnected to field theory, for a compacted dimension realized in a metallic metasurface periodically structured in the form of a grating comprising a series of singularities. An extra dimension of the grating is hidden, and the surface plasmon excitations, though localized at the surface, are characterized by three wave vectors rather than the two of typical two-dimensional metal grating. We propose an experimental realization in a doped graphene layer.

Stable isotope (O and C) and pollen trends in eastern Lake Erie, evidence for a locally-induced climatic reversal of Younger Dryas age in the Great Lakes basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lewis, C.F.M.; Anderson, T.W.

A cool period from about 11000 to 10500 BP (11 to 10.5 ka) is recognized in pollen records from the southern Great Lakes area by the return of Picea and Abies dominance and by the persistence of herbs. The area of cooling appears centred on the Upper Great Lakes. A high-resolution record (ca. 9 mm/y) from a borehole in eastern Lake Erie reveals, in the same time interval, this pollen anomaly, isotope evidence of melt-water presence (a-3 per mil shift in {delta} {sup 18}O and a + 1.1 per mil shift in {delta}{sup 13}C), increased sand, and reduced detrital calcitemore » content, all suggesting concurrent cooling of Lake Erie. The onset of cooling is mainly attributed to the effect of enhanced meltwater inflow on the relatively large upstream Main Lake Agassiz. Termination of the cooling coincides with drainage of Lake Algonquin, and is attributed to loss of its cooling effectiveness associated with a substantial reduction in its surface area. It is hypothesized that that the cold extra in-flow effectively prolonged the seasonal presence of lake ice and the period of spring overturn in Lake Algonquin. The deep mixing would have greatly increased the thermal conductive capacity of this extensive lake, causing suppression of summer surface lakewater temperatures and reduction of onshore growing-degree days. Alternatively, a rapid flow of meltwater, buoyed on sediment-charged (denser) lakewater, may have kept the lake surface cold in summer. Other factors such as wind-shifted pollen deposition and possible effects from the Younger Dryas North Atlantic cooling could have contributed to the Great Lakes climatic reversal, but further studies are needed to resolve their relative significance. 51 refs., 5 figs.« less

15 CFR 400.42 - Requirements for commencement of operations in a zone project.

Code of Federal Regulations, 2010 CFR

2010-01-01

... information for users concerning the operation of the facility and a statement of rates and charges as...: (i) The going-rates and charges for like operations in the area and the extra costs of operating a...

Quantifying incident-induced travel delays on freeways using traffic sensor data : phase II

DOT National Transportation Integrated Search

2010-12-01

Traffic incidents cause approximately 50 percent of freeway congestion in metropolitan areas, resulting in extra travel time and fuel cost. Quantifying incident-induced delay (IID) will help people better understand the real costs of incidents, maxim...

Anterior Inferior Iliac Spine (AIIS) and Subspine Hip Impingement

PubMed Central

Carton, Patrick; Filan, David

2016-01-01

Summary Background Abnormal morphology of the anterior inferior iliac spine (AIIS) and the subspine region of the acetabular rim are increasingly being recognised as a source of symptomatic extra-articular hip impingement. This review article aims to highlight important differences in the pathogenesis, clinical presentation and management of extra-articular hip impingement from both the AIIS and subspine bony regions, and the outcome following surgical intervention. Methods A literature review was undertaken to examine the supporting evidence for AIIS and subspine hip impingement. A narrative account of the Author’s professional experience in this area, including operative technique for arthroscopic correction, is also presented. Results Abnormal morphology of the AIIS and subspine region has been classified using cadaveric, radiological and arthroscopic means; the clinical presentation and operative treatment has been documented in several case series studies. Dual pathology is often present - recognition and treatment of both intra- and extra-articular components are necessary for good postoperative outcome. Conclusions AIIS and sub-spine hip impingement should be considered as distinct pathological entities, which may also co-exist. Symptom relief can be expected following arthroscopic deformity correction with the treatment of concomitant intra-articular pathology. Failure to recognise and treat the extra-articular component may affect postoperative outcome. Level of evidence V. PMID:28066737

Extra-virgin olive oil diet and mild physical activity prevent cartilage degeneration in an osteoarthritis model: an in vivo and in vitro study on lubricin expression.

PubMed

Musumeci, Giuseppe; Trovato, Francesca Maria; Pichler, Karin; Weinberg, Annelie Martina; Loreto, Carla; Castrogiovanni, Paola

2013-12-01

Mediterranean diet includes a relatively high fat consumption mostly from monounsaturated fatty acids mainly provided by olive oil, the principal source of culinary and dressing fat. The beneficial effects of olive oil have been widely studied and could be due to its phytochemicals, which have been shown to possess anti-inflammatory properties. Lubricin is a chondroprotective glycoprotein and it serves as a critical boundary lubricant between opposing cartilage surfaces. A joint injury causes an initial flare of cytokines, which decreases lubricin expression and predisposes to cartilage degeneration such as osteoarthritis. The aim of this study was to evaluate the role of extra-virgin olive oil diet and physical activity on inflammation and expression of lubricin in articular cartilage of rats after injury. In this study we used histomorphometric, histological, immunocytochemical, immunohistochemical, western blot and biochemical analysis for lubricin and interleukin-1 evaluations in the cartilage and in the synovial fluid. We report the beneficial effect of physical activity (treadmill training) and extra-virgin olive oil supplementation, on the articular cartilage. The effects of anterior cruciate ligament transection decrease drastically the expression of lubricin and increase the expression of interleukin-1 in rats, while after physical activity and extra-virgin olive oil supplemented diet, the values return to a normal level compared to the control group. With our results we can confirm the importance of the physical activity in conjunction with extra-virgin olive oil diet in medical therapy to prevent osteoarthritis disease in order to preserve the articular cartilage and then the entire joint.

The neuroanatomy of grapheme-color synesthesia.

PubMed

Jäncke, Lutz; Beeli, Gian; Eulig, Cornelia; Hänggi, Jürgen

2009-03-01

Grapheme-color synesthetes perceive particular colors when seeing a letter, word or number (grapheme). Functional neuroimaging studies have provided some evidence in favor of a neural basis for this type of synesthesia. Most of these studies have reported extra activations in the fusiform gyrus, which is known to be involved in color, letter and word processing. The present study examined different neuroanatomical features (i.e. cortical thickness, cortical volume and cortical surface area) in a sample of 48 subjects (24 grapheme-color synesthetes and 24 control subjects), and revealed increased cortical thickness, volume and surface area in the right and left fusiform gyrus and in adjacent regions, such as the lingual gyrus and the calcarine cortex, in grapheme-color synesthetes. In addition, we set out to analyze structural connectivity based on fractional anisotropy (FA) measurements in a subsample of 28 subjects (14 synesthetes and 14 control subjects). In contrast to the findings of a recent neuroanatomical study using modern diffusion tensor imaging measurement techniques, we did not detect any statistically significant difference in FA between synesthetes and non-synesthetes in the fusiform gyri. Our study thus supports the hypothesis of local anatomical differences in cortical characteristics in the vicinity of the V4 complex. The observed altered brain anatomy in grapheme-color synesthetes might be the anatomical basis for this particular form of synesthesia but it is also possible that the detected effects are a consequence (rather than the primary cause) of the life-long experience of grapheme-color synesthesia.

Activated carbon fiber composite as a new material for electrical and electrochemical applications

NASA Astrophysics Data System (ADS)

Nasr, Mohamed Fathy

Activated carbon fiber (ACF) is a microporous material consisting of three-dimensional network of micrographitic layers. The micrographitic edges have a considerable amount of active functional groups (such as -COOH, -OH, -CO-, -O-) and dangling bonds. The huge specific surface area (up to 3000 m2/g) is another important property of ACF. Exploitation of the high surface area and the reactivity of the functional groups of ACF, through incorporating or doping ACF with transition metal salts (M) and/or binder (B), was used to enhance the electrical properties of ACF. Such treatments created new interfaces such as (ACF/M, ACF/M/B, and ACF/B/M) through which an extra charge can be localized, transferred, or stored. This process can be of great benefit in energy storage devices such as supercapacitors for computer memory backup. In this work, activated carbon fiber nonwoven fabrics have been impregnated with different concentrations of organometallic Cu and Zn salts, a carbonaceous sot binder, or mixtures of both, followed by thermal treatment over a temperature range 300°C--900°C under an inert atmosphere. The use of carbonaceous sot as a binder has used in the study, is novel. Electrical measurements, current-voltage characterization, current-time relationship, as well as the relative permittivity and impedance of ACF composites, have been conducted. The electric double-layer capacitance of the as-received and the ACF composites were also evaluated.

Metal-Organic Framework-Derived NiSb Alloy Embedded in Carbon Hollow Spheres as Superior Lithium-Ion Battery Anodes.

PubMed

Yu, Litao; Liu, Jun; Xu, Xijun; Zhang, Liguo; Hu, Renzong; Liu, Jiangwen; Yang, Lichun; Zhu, Min

2017-01-25

The MOFs (metal-organic frameworks) have been extensively used for electrode materials due to their high surface area, permanent porosity, and hollow structure, but the role of antimony on the MOFs is unclear. In this work, we design the hollow spheres Ni-MOFs with SbCl 3 to synthesize NiSb⊂CHSs (NiSb-embedded carbon hollow spheres) via simple annealing and galvanic replacement reactions. The NiSb⊂CHSs inherited the advantages of Ni-MOFs with hollow structure, high surface area, and permanent porosity, and the NiSb nanoparticles are coated by the formed carbon particles which could effectively solve the problem of vigorous volume changes during the Li + insertion/extraction process. The porous and network structure could well provide an extremely reduced pathway for fast Li + diffusion and electron transport and provide extra free space for alleviating the structural strain. The NiSb⊂CHSs with these features were used as Li-ion batteries for the first time and exhibited excellent cycling performance, high specific capacity, and great rate capability. When coupled with a nanostructure LiMn 2 O 4 cathode, the NiSb⊂CHSs//LiMn 2 O 4 full cell also characterized a high voltage operation of ≈3.5 V, high rate capability (210 mA h g -1 at a current density of 2000 mA g -1 ), and high Coulombic efficiency of approximate 99%, meeting the requirement for the increasing demand for improved energy devices.

A composite generator film impregnated with cellulose nanocrystals for enhanced triboelectric performance

Treesearch

Jun Peng; Huilong Zhang; Qifeng Zheng; Craig M. Clemons; Ronald C. Sabo; Shaoqin Gong; Zhenqiang Ma; Lih-Sheng Turng

2017-01-01

A novel polydimethylsiloxane (PDMS)/cellulose nanocrystal flake (CNCF) composite triboelectric nanogenerator (CTG) using CNCFs as effective dielectrics a 10-times-enhanced triboelectric performance compared with its pure PDMS counterpart. Positive charges generated on the surface of the CNCFs during cyclic compression boosted electron transfer and induced extra charges...

7 CFR 51.3146 - U.S. Extra No. 1.

Code of Federal Regulations, 2011 CFR

2011-01-01

... from decay, broken skins which are not healed, worms, worm holes and free from injury caused by split... percent of the nectarines in any lot shall show some blushed or red color including therein at least 50 percent of the nectarines with not less than one-third of the fruit surface showing red color...

7 CFR 51.3146 - U.S. Extra No. 1.

Code of Federal Regulations, 2012 CFR

2012-01-01

... from decay, broken skins which are not healed, worms, worm holes and free from injury caused by split... percent of the nectarines in any lot shall show some blushed or red color including therein at least 50 percent of the nectarines with not less than one-third of the fruit surface showing red color...

The Bernoulli Equation in a Moving Reference Frame

ERIC Educational Resources Information Center

Mungan, Carl E.

2011-01-01

Unlike other standard equations in introductory classical mechanics, the Bernoulli equation is not Galilean invariant. The explanation is that, in a reference frame moving with respect to constrictions or obstacles, those surfaces do work on the fluid, constituting an extra term that needs to be included in the work-energy calculation. A…

802.16e System Profile for NASA Extra-Vehicular Activities

NASA Technical Reports Server (NTRS)

Foore, Lawrence R.; Chelmins, David T.; Nguyen, Hung D.; Downey, Joseph A.; Finn, Gregory G.; Cagley, Richard E.; Bakula, Casey J.

2009-01-01

This report identifies an 802.16e system profile that is applicable to a lunar surface wireless network, and specifically for meeting extra-vehicular activity (EVA) data flow requirements. EVA suit communication needs are addressed. Design-driving operational scenarios are considered. These scenarios are then used to identify a configuration of the 802.16e system (system profile) that meets EVA requirements, but also aim to make the radio realizable within EVA constraints. Limitations of this system configuration are highlighted. An overview and development status is presented by Toyon Research Corporation concerning the development of an 802.16e compatible modem under NASA s Small Business Innovative Research (SBIR) Program. This modem is based on the recommended system profile developed as part of this report. Last, a path forward is outlined that presents an evolvable solution for the EVA radio system and lunar surface radio networks. This solution is based on a custom link layer, and 802.16e compliant physical layer compliant to the identified system profile, and a later progression to a fully interoperable 802.16e system.

Wafer-Scale Integration of Inverted Nanopyramid Arrays for Advanced Light Trapping in Crystalline Silicon Thin Film Solar Cells.

PubMed

Zhou, Suqiong; Yang, Zhenhai; Gao, Pingqi; Li, Xiaofeng; Yang, Xi; Wang, Dan; He, Jian; Ying, Zhiqin; Ye, Jichun

2016-12-01

Crystalline silicon thin film (c-Si TF) solar cells with an active layer thickness of a few micrometers may provide a viable pathway for further sustainable development of photovoltaic technology, because of its potentials in cost reduction and high efficiency. However, the performance of such cells is largely constrained by the deteriorated light absorption of the ultrathin photoactive material. Here, we report an efficient light-trapping strategy in c-Si TFs (~20 μm in thickness) that utilizes two-dimensional (2D) arrays of inverted nanopyramid (INP) as surface texturing. Three types of INP arrays with typical periodicities of 300, 670, and 1400 nm, either on front, rear, or both surfaces of the c-Si TFs, are fabricated by scalable colloidal lithography and anisotropic wet etch technique. With the extra aid of antireflection coating, the sufficient optical absorption of 20-μm-thick c-Si with a double-sided 1400-nm INP arrays yields a photocurrent density of 39.86 mA/cm(2), which is about 76 % higher than the flat counterpart (22.63 mA/cm(2)) and is only 3 % lower than the value of Lambertian limit (41.10 mA/cm(2)). The novel surface texturing scheme with 2D INP arrays has the advantages of excellent antireflection and light-trapping capabilities, an inherent low parasitic surface area, a negligible surface damage, and a good compatibility for subsequent process steps, making it a good alternative for high-performance c-Si TF solar cells.

Electrochemically induced actuation of liquid metal marbles

NASA Astrophysics Data System (ADS)

Tang, Shi-Yang; Sivan, Vijay; Khoshmanesh, Khashayar; O'Mullane, Anthony P.; Tang, Xinke; Gol, Berrak; Eshtiaghi, Nicky; Lieder, Felix; Petersen, Phred; Mitchell, Arnan; Kalantar-Zadeh, Kourosh

2013-06-01

Controlled actuation of soft objects with functional surfaces in aqueous environments presents opportunities for liquid phase electronics, novel assembled super-structures and unusual mechanical properties. We show the extraordinary electrochemically induced actuation of liquid metal droplets coated with nanoparticles, so-called ``liquid metal marbles''. We demonstrate that nanoparticle coatings of these marbles offer an extra dimension for affecting the bipolar electrochemically induced actuation. The nanoparticles can readily migrate along the surface of liquid metals, upon the application of electric fields, altering the capacitive behaviour and surface tension in a highly asymmetric fashion. Surprising actuation behaviours are observed illustrating that nanoparticle coatings can have a strong effect on the movement of these marbles. This significant novel phenomenon, combined with unique properties of liquid metal marbles, represents an exciting platform for enabling diverse applications that cannot be achieved using rigid metal beads.Controlled actuation of soft objects with functional surfaces in aqueous environments presents opportunities for liquid phase electronics, novel assembled super-structures and unusual mechanical properties. We show the extraordinary electrochemically induced actuation of liquid metal droplets coated with nanoparticles, so-called ``liquid metal marbles''. We demonstrate that nanoparticle coatings of these marbles offer an extra dimension for affecting the bipolar electrochemically induced actuation. The nanoparticles can readily migrate along the surface of liquid metals, upon the application of electric fields, altering the capacitive behaviour and surface tension in a highly asymmetric fashion. Surprising actuation behaviours are observed illustrating that nanoparticle coatings can have a strong effect on the movement of these marbles. This significant novel phenomenon, combined with unique properties of liquid metal marbles, represents an exciting platform for enabling diverse applications that cannot be achieved using rigid metal beads. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr00185g

Assessment of radar altimetry correction slopes for marine gravity recovery: A case study of Jason-1 GM data

NASA Astrophysics Data System (ADS)

Zhang, Shengjun; Li, Jiancheng; Jin, Taoyong; Che, Defu

2018-04-01

Marine gravity anomaly derived from satellite altimetry can be computed using either sea surface height or sea surface slope measurements. Here we consider the slope method and evaluate the errors in the slope of the corrections supplied with the Jason-1 geodetic mission data. The slope corrections are divided into three groups based on whether they are small, comparable, or large with respect to the 1 microradian error in the current sea surface slope models. (1) The small and thus negligible corrections include dry tropospheric correction, inverted barometer correction, solid earth tide and geocentric pole tide. (2) The moderately important corrections include wet tropospheric correction, dual-frequency ionospheric correction and sea state bias. The radiometer measurements are more preferred than model values in the geophysical data records for constraining wet tropospheric effect owing to the highly variable water-vapor structure in atmosphere. The items of dual-frequency ionospheric correction and sea state bias should better not be directly added to range observations for obtaining sea surface slopes since their inherent errors may cause abnormal sea surface slopes and along-track smoothing with uniform distribution weight in certain width is an effective strategy for avoiding introducing extra noises. The slopes calculated from radiometer wet tropospheric corrections, and along-track smoothed dual-frequency ionospheric corrections, sea state bias are generally within ±0.5 microradians and no larger than 1 microradians. (3) Ocean tide has the largest influence on obtaining sea surface slopes while most of ocean tide slopes distribute within ±3 microradians. Larger ocean tide slopes mostly occur over marginal and island-surrounding seas, and extra tidal models with better precision or with extending process (e.g. Got-e) are strongly recommended for updating corrections in geophysical data records.

Bayesian Modeling of Perceived Surface Slant from Actively-Generated and Passively-Observed Optic Flow

PubMed Central

Caudek, Corrado; Fantoni, Carlo; Domini, Fulvio

2011-01-01

We measured perceived depth from the optic flow (a) when showing a stationary physical or virtual object to observers who moved their head at a normal or slower speed, and (b) when simulating the same optic flow on a computer and presenting it to stationary observers. Our results show that perceived surface slant is systematically distorted, for both the active and the passive viewing of physical or virtual surfaces. These distortions are modulated by head translation speed, with perceived slant increasing directly with the local velocity gradient of the optic flow. This empirical result allows us to determine the relative merits of two alternative approaches aimed at explaining perceived surface slant in active vision: an “inverse optics” model that takes head motion information into account, and a probabilistic model that ignores extra-retinal signals. We compare these two approaches within the framework of the Bayesian theory. The “inverse optics” Bayesian model produces veridical slant estimates if the optic flow and the head translation velocity are measured with no error; because of the influence of a “prior” for flatness, the slant estimates become systematically biased as the measurement errors increase. The Bayesian model, which ignores the observer's motion, always produces distorted estimates of surface slant. Interestingly, the predictions of this second model, not those of the first one, are consistent with our empirical findings. The present results suggest that (a) in active vision perceived surface slant may be the product of probabilistic processes which do not guarantee the correct solution, and (b) extra-retinal signals may be mainly used for a better measurement of retinal information. PMID:21533197

2009 urban mobility report.

DOT National Transportation Integrated Search

2009-07-01

Congestion is a problem in Americas 439 urban areas, and it has gotten worse in regions of all : sizes. In 2007, congestion caused urban Americans to travel 4.2 billion hours more and to : purchase an extra 2.8 billion gallons of fuel for a conges...

Large Ice Crystal Charge Transfer Studies

DTIC Science & Technology

1988-10-28

electrification. However, the extra- polation using qcd 4 was completely unjustified. With corrected values of the separation probability of ice crystals...contact to leak away from the local area or become trapped in the crystal lattice . Obviously, larger initial charge transfers, with larger 6 crystals

Lesions of the hippocampus or dorsolateral striatum disrupt distinct aspects of spatial navigation strategies based on proximal and distal information in a cued variant of the Morris water task

PubMed Central

Rice, James P.; Wallace, Douglas G.; Hamilton, Derek A.

2015-01-01

The hippocampus and dorsolateral striatum are critically involved in spatial navigation based on extra-maze and intra-maze cues, respectively. Previous reports from our laboratory suggest that behavior in the Morris water task may be guided by both cue types, and rats appear to switch from extra-pool to intra-pool cues to guide navigation in a sequential manner within a given trial. In two experiments, rats with hippocampal or dorsolateral striatal lesions were trained and tested in water task paradigms that involved translation and removal of a cued platform within the pool and translations of the pool itself with respect to the extra-pool cue reference frame. In the first experiment, moment-to-moment analyses of swim behavior indicate that hippocampal lesions disrupt initial trajectories based on extra-pool cues at the beginning of the trial, while dorsolateral striatal lesions disrupt subsequent swim trajectories based on the location of the cued platform at the end of the trial. In the second experiment lesions of the hippocampus, but not the dorsolateral striatum, impaired directional responding in situations where the pool was shifted within the extra-pool cue array. These results are important for understanding the cooperative interactions between the hippocampus and dorsolateral striatum in spatial learning and memory, and establish that these brain areas are continuously involved in goal-directed spatial navigation. These results also highlight the importance of the hippocampus in directional responding in addition to place navigation. PMID:25907746

Lung burden and deposition distribution of inhaled atmospheric urban ultrafine particles as the first step in their health risk assessment

NASA Astrophysics Data System (ADS)

Salma, Imre; Füri, Péter; Németh, Zoltán; Balásházy, Imre; Hofmann, Werner; Farkas, Árpád

2015-03-01

Realistic median particle number size distributions were derived by a differential mobility particle sizer in a diameter range of 6-1000 nm for near-city background, city centre, street canyon and road tunnel environments in Budapest. Deposition of inhaled particles within airway generations of an adult woman was determined by a stochastic lung deposition model for sleeping, sitting, light and heavy exercise breathing conditions. Deposition fractions in the respiratory tract were considerable and constant for all physical activities with a mean of 56%. Mean deposition fraction in the extra-thoracic region averaged for the urban environments was decreasing monotonically from 26% for sleeping to 9.4% for heavy exercise. The mean deposition fractions in the tracheobronchial region were constant for the physical activities and urban environments with an overall mean of 12.5%, while the mean deposition fraction in the acinar region averaged for the urban locations increased monotonically with physical activity from 14.7% for sleeping to 34% for heavy exercise. The largest contribution of the acinar deposition to the lung deposition was 75%. The deposition rates in the lung were larger than in the extra-thoracic region, and the deposition rate in the lung was increasingly realised in the AC region by physical activity. It was the extra-thoracic region that received the largest surface density deposition rates; its loading was higher by 3 orders of magnitude than for the lung. Deposition fractions in the airway generations exhibited a distinct peak in the acinar region. The maximum of the curves was shifted to peripheral airway generations with physical activity. The shapes of the surface density deposition rate curves were completely different from those for the deposition rates, indicating that the first few airway generations received the highest surface loading in the lung.

Gas cluster ion beam for the characterization of organic materials in submarine basalts as Mars analogs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sano, Naoko, E-mail: naoko.sano@ncl.ac.uk; Barlow, Anders J.; Cumpson, Peter J.

The solar system contains large quantities of organic compounds that can form complex molecular structures. The processing of organic compounds by biological systems leads to molecules with distinctive structural characteristics; thus, the detection and characterization of organic materials could lead to a high degree of confidence in the existence of extra-terrestrial life. Given the nature of the surface of most planetary bodies in the solar system, evidence of life is more likely to be found in the subsurface where conditions are more hospitable. Basalt is a common rock throughout the solar system and the primary rock type on Mars andmore » Earth. Basalt is therefore a rock type that subsurface life might exploit and as such a suitable material for the study of methods required to detect and analyze organic material in rock. Telluric basalts from Earth represent an analog for extra-terrestrial rocks where the indigenous organic matter could be analyzed for molecular biosignatures. This study focuses on organic matter in the basalt with the use of surface analysis techniques utilizing Ar gas cluster ion beams (GCIB); time of flight secondary ion mass spectrometry (ToF-SIMS), and x-ray photoelectron spectroscopy (XPS), to characterize organic molecules. Tetramethylammonium hydroxide (TMAH) thermochemolysis was also used to support the data obtained using the surface analysis techniques. The authors demonstrate that organic molecules were found to be heterogeneously distributed within rock textures. A positive correlation was observed to exist between the presence of microtubule textures in the basalt and the organic compounds detected. From the results herein, the authors propose that ToF-SIMS with an Ar GCIB is effective at detecting organic materials in such geological samples, and ToF-SIMS combined with XPS and TMAH thermochemolysis may be a useful approach in the study of extra-terrestrial organic material and life.« less

SDSS IV MaNGA: Deep observations of extra-planar, diffuse ionized gas around late-type galaxies from stacked IFU spectra

NASA Astrophysics Data System (ADS)

Jones, A.; Kauffmann, G.; D'Souza, R.; Bizyaev, D.; Law, D.; Haffner, L.; Bahé, Y.; Andrews, B.; Bershady, M.; Brownstein, J.; Bundy, K.; Cherinka, B.; Diamond-Stanic, A.; Drory, N.; Riffel, R. A.; Sánchez, S. F.; Thomas, D.; Wake, D.; Yan, R.; Zhang, K.

2017-03-01

We have conducted a study of extra-planar diffuse ionized gas using the first year data from the MaNGA IFU survey. We have stacked spectra from 49 edge-on, late-type galaxies as a function of distance from the midplane of the galaxy. With this technique we can detect the bright emission lines Hα, Hβ, [O II]λλ3726, 3729, [O III]λ5007, [N II]λλ6549, 6584, and [S II]λλ6717, 6731 out to about 4 kpc above the midplane. With 16 galaxies we can extend this analysis out to about 9 kpc, I.e. a distance of 2Re, vertically from the midplane. In the halo, the surface brightnesses of the [O II] and Hα emission lines are comparable, unlike in the disk where Hα dominates. When we split the sample by specific star-formation rate, concentration index, and stellar mass, each subsample's emission line surface brightness profiles and ratios differ, indicating that extra-planar gas properties can vary. The emission line surface brightnesses of the gas around high specific star-formation rate galaxies are higher at all distances, and the line ratios are closer to ratios characteristic of H II regions compared with low specific star-formation rate galaxies. The less concentrated and lower stellar mass samples exhibit line ratios that are more like H II regions at larger distances than their more concentrated and higher stellar mass counterparts. The largest difference between different subsamples occurs when the galaxies are split by stellar mass. We additionally infer that gas far from the midplane in more massive galaxies has the highest temperatures and steepest radial temperature gradients based on their [N II]/Hα and [O II]/Hα ratios between the disk and the halo. SDSS IV.

Planetary habitability: is Earth commonplace in the Milky Way?

NASA Astrophysics Data System (ADS)

Franck, S.; Block, A.; Bloh, W.; Bounama, C.; Garrido, I.; Schellnhuber, H.-J.

2001-08-01

Is there life beyond planet Earth? This is one of the grand enigmas which humankind tries to solve through scientific research. Recent progress in astronomical measurement techniques has confirmed the existence of a multitude of extra-solar planets. On the other hand, enormous efforts are being made to assess the possibility of life on Mars. All these activities have stimulated several investigations about the habitability of cosmic bodies. The habitable zone (HZ) around a given central star is defined as the region within which an Earth-like planet might enjoy the moderate surface temperatures required for advanced life forms. At present, there are several models determining the HZ. One class of models utilises climate constraints for the existence of liquid water on a planetary surface. Another approach is based on an integrated Earth system analysis that relates the boundaries of the HZ to the limits of photosynthetic processes. Within the latter approach, the evolution of the HZ for our solar system over geological time scales is calculated straightforwardly, and a convenient filter can be constructed that picks the candidates for photosynthesis-based life from all the extra-solar planets discovered by novel observational methods. These results can then be used to determine the average number of planets per planetary system that are within the HZ. With the help of a segment of the Drake equation, the number of "Gaias" (i.e. extra-solar terrestrial planets with a globally acting biosphere) is estimated. This leads to the thoroughly educated guess that there should exist half a million Gaias in the Milky Way.

Planetary habitability: is Earth commonplace in the Milky Way?

PubMed

Franck, S; Block, A; von Bloh, W; Bounama, C; Garrido, I; Schellnhuber, H J

2001-10-01

Is there life beyond planet Earth? This is one of the grand enigmas which humankind tries to solve through scientific research. Recent progress in astronomical measurement techniques has confirmed the existence of a multitude of extra-solar planets. On the other hand, enormous efforts are being made to assess the possibility of life on Mars. All these activities have stimulated several investigations about the habitability of cosmic bodies. The habitable zone (HZ) around a given central star is defined as the region within which an Earth-like planet might enjoy the moderate surface temperatures required for advanced life forms. At present, there are several models determining the HZ. One class of models utilises climate constraints for the existence of liquid water on a planetary surface. Another approach is based on an integrated Earth system analysis that relates the boundaries of the HZ to the limits of photosynthetic processes. Within the latter approach, the evolution of the HZ for our solar system over geological time scales is calculated straightforwardly, and a convenient filter can be constructed that picks the candidates for photosynthesis-based life from all the extra-solar planets discovered by novel observational methods. These results can then be used to determine the average number of planets per planetary system that are within the HZ. With the help of a segment of the Drake equation, the number of "Gaias" (i.e. extra-solar terrestrial planets with a globally acting biosphere) is estimated. This leads to the thoroughly educated guess that there should exist half a million Gaias in the Milky Way.

Clinical, molecular and drug sensitivity pattern of mycobacterial isolates from extra-pulmonary tuberculosis cases in Addis Ababa, Ethiopia.

PubMed

Korma, Workneh; Mihret, Adane; Hussien, Jemal; Anthony, Richard; Lakew, Mekuria; Aseffa, Abraham

2015-10-26

In conjunction with the spread of HIV infection, tuberculosis (TB) remains a major cause of illness and death worldwide. The Ethiopian national report reveals that extra pulmonary tuberculosis is on the rise and that case detection rate is exceeding that of smear positive or negative cases in many parts of the country. Different studies indicated that host and/or pathogen related factors are associated with the rise of extra pulmonary cases. However, the reason for this is not clearly known in our setting. Specimens were taken from clinically suspected extra pulmonary patients and confirmed by cytology, histopathology and culture. Deletion typing and Spoligotyping was utilized to identify the strains. The isolates were then assigned to lineage using conformal Bayesian network (rules model) algorithm and dendrograms were drawn using UPGMA methods. In addition, drug sensitivity test was done using the indirect proportion and 24 well plate methods. Out of the 200 clinically suspected extra pulmonary tuberculosis patients, 106 (53 %) were between 15 and 35 years of age and 167 (83.5 %) were new while 33 (16.5 %) were retreatment cases. The culture yield was 29.5 % (59). Of these only one was M. bovis and 58 were M. tuberculosis strains with 31 different spoligotype patterns grouped into seven clusters. The largest cluster (ST53) comprised 12 (20.3 %) isolates. There was higher clustering of CAS isolates in TBLN than in any other form of extra pulmonary tuberculosis cases. Resistance to rifampicin was higher (22 %) than that for INH, STM and EMB (8.1 %, 5 % and 3 % respectively). Out of the 37 isolates tested for resistance, only 2 isolates were resistant for both STM and INH and no MDR strain was found. There is an ongoing active recent transmission among extra pulmonary tuberculosis in the study areas as shown by the presence of clusters. Although no MDR case was observed, there is a risk of emergence of MDR as noted from the high proportion of resistance to rifampicin. Detailed study at population level is recommended to monitor its trend.

[Ganglions of the wrist: proposals for topographical systematization and natural history].

PubMed

Kuhlmann, J-N; Luboinski, J; Baux, S; Mimoun, M

2003-06-01

We looked for the anatomic origin and mechanism of constitution of the so-called "ganglions" of the wrist. Fifty-nine formations considered to be synovial ganglions were dissected and removed according to the same protocol by the same surgeon. Eleven were re-examined by a pathologist. All ganglions were extra-articular but had intra- and extra-capsular components. The extra-capsular part was the clinically palpable main cyst. The intra-capsular part was composed of the cystic stalk and its base of implantation. An intra-capsular stalk was present in 58 cases. The stalk was situated between the joint synovium and the capsula which it perforated at a weak point between two ligaments, forming a collar before expanding outwardly. Based on our findings, we propose a topographical systematization and natural history of ganglions of the wrist. The stalk's implantation base was always located on bone and found in the intermediate area of Colomniati and Soubbotine, which lies outside the articular cartilage between the synovium and the ligamentous capsula. This area is exposed to mechanical stress initiating histological degenerative lesions, particularly mucoid degeneration. At the radiocarpal joint, the stalk's base of implantation was located at the distal end of the lateral dorsal or volar edge of the lunate bone or at the corresponding part of the scaphoid. The collar of the proximal ganglions was situated between the dorsal radiocarpal and transverse scaphotriquetral ligament. The collar of distal dorsal ganglions was situated between the transverse scaphotriquetral and the trapezotriquetral ligament. The collar of the lateral ganglions was situated between the lateral collateral and the transverse ligament. The collar of the volar ganglions was situated between the stylocarpal ligament and the radiolunotriquetral ligament, or between the different stylocarpal ligaments. At the level of the scaphotrapezal joint, the stalk's base of implantation was located near the collateral edge of the distal surface of the joint with the collar between the distal scaphoidal ligaments. The palmar cysts exhibited a collar between the stylocarpal ligaments and the radiolunotriquetral ligament or between the different stylocarpal ligaments. At pathology examination, the lesions were not found to be different from those observed in other connective tissues exposed to overuse or repeated microtrauma (sports, occupational exposure). Anatomic conditions inside the joint capsula excluded extension of the mucoid degeneration transversally. The only issue was through the capsula, allowing the mucus enclosed in the connective tissue fibers to form the main cyst. Knowledge of these different processes enabled a topographical systematization useful for complete surgical or arthroscopic removal of the ganglion. Complete resection would prevent recurrence.

Hippocampal LTP and contextual learning require surface diffusion of AMPA receptors.

PubMed

Penn, A C; Zhang, C L; Georges, F; Royer, L; Breillat, C; Hosy, E; Petersen, J D; Humeau, Y; Choquet, D

2017-09-21

Long-term potentiation (LTP) of excitatory synaptic transmission has long been considered a cellular correlate for learning and memory. Early LTP (less than 1 h) had initially been explained either by presynaptic increases in glutamate release or by direct modification of postsynaptic AMPA (α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid) receptor function. Compelling models have more recently proposed that synaptic potentiation can occur by the recruitment of additional postsynaptic AMPA receptors (AMPARs), sourced either from an intracellular reserve pool by exocytosis or from nearby extra-synaptic receptors pre-existing on the neuronal surface. However, the exact mechanism through which synapses can rapidly recruit new AMPARs during early LTP remains unknown. In particular, direct evidence for a pivotal role of AMPAR surface diffusion as a trafficking mechanism in synaptic plasticity is still lacking. Here, using AMPAR immobilization approaches, we show that interfering with AMPAR surface diffusion markedly impairs synaptic potentiation of Schaffer collaterals and commissural inputs to the CA1 area of the mouse hippocampus in cultured slices, acute slices and in vivo. Our data also identify distinct contributions of various AMPAR trafficking routes to the temporal profile of synaptic potentiation. In addition, AMPAR immobilization in vivo in the dorsal hippocampus inhibited fear conditioning, indicating that AMPAR diffusion is important for the early phase of contextual learning. Therefore, our results provide a direct demonstration that the recruitment of new receptors to synapses by surface diffusion is a critical mechanism for the expression of LTP and hippocampal learning. Since AMPAR surface diffusion is dictated by weak Brownian forces that are readily perturbed by protein-protein interactions, we anticipate that this fundamental trafficking mechanism will be a key target for modulating synaptic potentiation and learning.

Ultra High Energy Cosmic Rays: Strangelets?

NASA Astrophysics Data System (ADS)

Xu, Ren-Xin; Wu, Fei

2003-06-01

The conjecture that ultra-high-energy cosmic rays (UHECRs) are actually strangelets is discussed. Besides the reason that strangelets can do as cosmic rays beyond the Greisen-Zatsepin-Kuzmin-cutoff, another argument to support the conjecture is addressed by the study of formation of TeV-scale microscopic black holes when UHECRs bombarding bare strange stars. It is proposed that the exotic quark surface of a bare strange star could be an effective astro-laboratory in the investigations of the extra dimensions and of the detection of ultra-high-energy neutrino fluxes. The flux of neutrinos (and other point-like particles) with energy larger than 2.3×1020 eV could be expected to be smaller than 10-26 cm-2 s-1 if there are two extra spatial dimensions.

School Planning Safe Transporting.

ERIC Educational Resources Information Center

New Jersey State Dept. of Education, Trenton. Bureau of Pupil Transportation.

Prepared for boards of education and municipal planning authorities, school site selection is related to school bus safety. Consideration of direction and density of traffic flow, street crossings, curbing, drainage, road width, parking areas, number of pupils and personnel, number of buses, method of transportation, schedules and extra-curricular…

Sensory and Volatile Profiles of Monovarietal North Tunisian Extra Virgin Olive Oils from 'Chétoui' Cultivar.

PubMed

Essid, Faten; Sifi, Samira; Beltrán, Gabriel; Sánchez, Sebastián; Raïes, Aly

2016-07-01

The quality of olive oil is defined as a combination of characteristics that significantly determine its acceptance by consumers. This study was carried out to compare sensorial and chemical characteristics of sixty 'Chétoui' extra virgin olive oils (EVOOc) samples from six northern areas in Tunisia (Tebourba (EVOOT); Other regions (EVOON): Mornag, Sidi Amor, El Kef, Béjà and Jendouba). Trained panel taste detected ten sensory attributes. EVOOT and EVOON were defined by 'tomato' and 'grass/ leave notes, respectively. Twenty one volatile compounds from EVOOc were extracted and identified by Headspace Solid-Phase Microextraction followed by Gas Chromatography- Flame Ionization Detector. Principal component and cluster analysis of all studied parameters showed that EVOOT differed from EVOON. Sensory and volatile profiles of EVOOc revealed that the perception of different aromas, in monovarietal olive oil, was the result of synergic effect of oils' various components, whose composition was influenced by the geographical growing area.

Reconstructing functional near-infrared spectroscopy (fNIRS) signals impaired by extra-cranial confounds: an easy-to-use filter method.

PubMed

Haeussinger, F B; Dresler, T; Heinzel, S; Schecklmann, M; Fallgatter, A J; Ehlis, A-C

2014-07-15

Functional near-infrared spectroscopy (fNIRS) is an optical neuroimaging method that detects temporal concentration changes of oxygenated and deoxygenated hemoglobin within the cortex, so that neural activation can be inferred. However, even though fNIRS is a very practical and well-tolerated method with several advantages particularly in methodically challenging measurement situations (e.g., during tasks involving movement or open speech), it has been shown to be confounded by systemic compounds of non-cerebral, extra-cranial origin (e.g. changes in blood pressure, heart rate). Especially event-related signal patterns induced by dilation or constriction of superficial forehead and temple veins impair the detection of frontal brain activation elicited by cognitive tasks. To further investigate this phenomenon, we conducted a simultaneous fNIRS-fMRI study applying a working memory paradigm (n-back). Extra-cranial signals were obtained by extracting the BOLD signal from fMRI voxels within the skin. To develop a filter method that corrects for extra-cranial skin blood flow, particularly intended for fNIRS data sets recorded by widely used continuous wave systems with fixed optode distances, we identified channels over the forehead with probable major extra-cranial signal contributions. The averaged signal from these channels was then subtracted from all fNIRS channels of the probe set. Additionally, the data were corrected for motion and non-evoked systemic artifacts. Applying these filters, we can show that measuring brain activation in frontal brain areas with fNIRS was substantially improved. The resulting signal resembled the fMRI parameters more closely than before the correction. Future fNIRS studies measuring functional brain activation in the forehead region need to consider the use of different filter options to correct for interfering extra-cranial signals. Copyright © 2014 Elsevier Inc. All rights reserved.

Cloud characterization and clear-sky correction from Landsat-7

USGS Publications Warehouse

Cahalan, Robert F.; Oreopoulos, L.; Wen, G.; Marshak, S.; Tsay, S. -C.; DeFelice, Tom

2001-01-01

Landsat, with its wide swath and high resolution, fills an important mesoscale gap between atmospheric variations seen on a few kilometer scale by local surface instrumentation and the global view of coarser resolution satellites such as MODIS. In this important scale range, Landsat reveals radiative effects on the few hundred-meter scale of common photon mean-free-paths, typical of scattering in clouds at conservative (visible) wavelengths, and even shorter mean-free-paths of absorptive (near-infrared) wavelengths. Landsat also reveals shadowing effects caused by both cloud and vegetation that impact both cloudy and clear-sky radiances. As a result, Landsat has been useful in development of new cloud retrieval methods and new aerosol and surface retrievals that account for photon diffusion and shadowing effects. This paper discusses two new cloud retrieval methods: the nonlocal independent pixel approximation (NIPA) and the normalized difference nadir radiance method (NDNR). We illustrate the improvements in cloud property retrieval enabled by the new low gain settings of Landsat-7 and difficulties found at high gains. Then, we review the recently developed “path radiance” method of aerosol retrieval and clear-sky correction using data from the Department of Energy Atmospheric Radiation Measurement (ARM) site in Oklahoma. Nearby clouds change the solar radiation incident on the surface and atmosphere due to indirect illumination from cloud sides. As a result, if clouds are nearby, this extra side-illumination causes clear pixels to appear brighter, which can be mistaken for extra aerosol or higher surface albedo. Thus, cloud properties must be known in order to derive accurate aerosol and surface properties. A three-dimensional (3D) Monte Carlo (MC) radiative transfer simulation illustrates this point and suggests a method to subtract the cloud effect from aerosol and surface retrievals. The main conclusion is that cloud, aerosol, and surface retrievals are linked and must be treated as a combined system. Landsat provides the range of scales necessary to observe the 3D cloud radiative effects that influence joint surface-atmospheric retrievals.

The Surface Density Distribution in the Solar Nebula

NASA Technical Reports Server (NTRS)

Davis, Sanford S.

2004-01-01

The commonly used minimum mass power law representation of the pre-solar nebula is reanalyzed using a new cumulative-mass-model. This model predicts a smoother surface density approximation compared with methods based on direct computation of surface density. The density is quantified using two independent analytical formulations. First, a best-fit transcendental function is applied directly to the basic planetary data. Next a solution to the time-dependent disk evolution equation is parametrically adapted to the solar nebula data. The latter model is shown to be a good approximation to the finite-size early Solar Nebula, and by extension to other extra solar protoplanetary disks.

Compacted dimensions and singular plasmonic surfaces.

PubMed

Pendry, J B; Huidobro, Paloma Arroyo; Luo, Yu; Galiffi, Emanuele

2017-11-17

In advanced field theories, there can be more than four dimensions to space, the excess dimensions described as compacted and unobservable on everyday length scales. We report a simple model, unconnected to field theory, for a compacted dimension realized in a metallic metasurface periodically structured in the form of a grating comprising a series of singularities. An extra dimension of the grating is hidden, and the surface plasmon excitations, though localized at the surface, are characterized by three wave vectors rather than the two of typical two-dimensional metal grating. We propose an experimental realization in a doped graphene layer. Copyright © 2017, American Association for the Advancement of Science.

Teacher Bonuses for Extra Work: A Profile of Missouri's Career Ladder Program

ERIC Educational Resources Information Center

Silman, Timothy; Glazerman, Steven

2009-01-01

This report set out to profile the Missouri Career Ladder program by delving beneath the surface and comparing how the program works in practice (based on stakeholder accounts) with how it works in theory (based on published statutes and regulations). The authors found that in many respects the program operates as one might expect. Districts…

Can a Social Networking Site Support Afterschool Group Learning of Mandarin?

ERIC Educational Resources Information Center

Yang, Yang; Crook, Charles; O'Malley, Claire

2014-01-01

Schools are often encouraged to facilitate extra-curricular learning within their own premises. This study addresses the potential of social networking sites (SNS) for supporting such out-of-class study. Given concerns that learning on these sites may happen at a surface level, we adopted self-determination theory for designing a social networking…

Best Practices Case Study: Tom Walsh and Co. - New Columbus, Portland, OR

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2010-09-01

Case study of Tom Walsh, who achieved 50% in heating and cooling energy savings over the 2004 IECC with advanced framing, superior air sealing, extra insulation, and ducts in conditioned space. Surface water runoff in the large urban rebuild development was handled with pervious pavers, swales, retention of existing trees, and green spaces.

Surface Roughness Measurement on a Wing Aircraft by Speckle Correlation

PubMed Central

Salazar, Félix; Barrientos, Alberto

2013-01-01

The study of the damage of aeronautical materials is important because it may change the microscopic surface structure profiles. The modification of geometrical surface properties can cause small instabilities and then a displacement of the boundary layer. One of the irregularities we can often find is surface roughness. Due to an increase of roughness and other effects, there may be extra momentum losses in the boundary layer and a modification in the parasite drag. In this paper we present a speckle method for measuring the surface roughness on an actual unmanned aircraft wing. The results show an inhomogeneous roughness distribution on the wing, as expected according to the anisotropic influence of the winds over the entire wing geometry. A calculation of the uncertainty of the technique is given. PMID:24013488

Surface roughness measurement on a wing aircraft by speckle correlation.

PubMed

Salazar, Félix; Barrientos, Alberto

2013-09-05

The study of the damage of aeronautical materials is important because it may change the microscopic surface structure profiles. The modification of geometrical surface properties can cause small instabilities and then a displacement of the boundary layer. One of the irregularities we can often find is surface roughness. Due to an increase of roughness and other effects, there may be extra momentum losses in the boundary layer and a modification in the parasite drag. In this paper we present a speckle method for measuring the surface roughness on an actual unmanned aircraft wing. The results show an inhomogeneous roughness distribution on the wing, as expected according to the anisotropic influence of the winds over the entire wing geometry. A calculation of the uncertainty of the technique is given.

Self-assembly of acetate adsorbates drives atomic rearrangement on the Au(110) surface

DOE PAGES

Hiebel, Fanny; Shong, Bonggeun; Chen, Wei; ...

2016-10-12

Weak inter-adsorbate interactions are shown to play a crucial role in determining surface structure, with major implications for its catalytic reactivity. This is exemplified here in the case of acetate bound to Au(110), where the small extra energy of the van der Waals interactions among the surface-bound groups drives massive restructuring of the underlying Au. Acetate is a key intermediate in electro-oxidation of CO 2 and a poison in partial oxidation reactions. Metal atom migration originates at surface defects and is likely facilitated by weakened Au–Au interactions due to bonding with the acetate. Even though the acetate is a relativelymore » small molecule, weak intermolecular interaction provides the energy required for molecular self-assembly and reorganization of the metal surface.« less

Self-assembly of acetate adsorbates drives atomic rearrangement on the Au(110) surface

PubMed Central

Hiebel, Fanny; Shong, Bonggeun; Chen, Wei; Madix, Robert J.; Kaxiras, Efthimios; Friend, Cynthia M.

2016-01-01

Weak inter-adsorbate interactions are shown to play a crucial role in determining surface structure, with major implications for its catalytic reactivity. This is exemplified here in the case of acetate bound to Au(110), where the small extra energy of the van der Waals interactions among the surface-bound groups drives massive restructuring of the underlying Au. Acetate is a key intermediate in electro-oxidation of CO2 and a poison in partial oxidation reactions. Metal atom migration originates at surface defects and is likely facilitated by weakened Au–Au interactions due to bonding with the acetate. Even though the acetate is a relatively small molecule, weak intermolecular interaction provides the energy required for molecular self-assembly and reorganization of the metal surface. PMID:27731407

Broad Area Review of the Enhanced Flight Screening Program

DTIC Science & Technology

1998-03-17

Hondo, TX, and Ruidoso , NM. Because this was a combined effort without AFOTEC involvement, both ASD and the contractor were responsible for the...testing at Ruidoso , NM (elevation 6,811 MSL) to evaluate high-density altitude performance. During the test, extra emphasis was placed on spin

Wetting kinetics of nanodroplets on lyophilic nanopillar-arrayed surfaces: A molecular dynamics study

NASA Astrophysics Data System (ADS)

Zong, Diyuan; Yang, Zhen; Duan, Yuanyuan

2017-10-01

Wetting kinetics of water droplets on substrates with lyophilic nanopillars was investigated using molecular dynamics simulations. Early spreading of the droplet is hindered by the nanopillars because of the penetration of the liquid which induce an extra dissipation in the droplet. Droplet spreading is mainly controlled by liquid viscosity and surface tension and not dependent on solid wettability. Propagation of the fringe film is hindered by the enhanced solid wettability because of the energy barrier introduced by the interaction between water molecules and nanopillars which increase with solid wettability.

Veronese geometry and the electroweak vacuum moduli space

NASA Astrophysics Data System (ADS)

He, Yang-Hui; Jejjala, Vishnu; Matti, Cyril; Nelson, Brent D.

2014-09-01

We explain the origin of the Veronese surface in the vacuum moduli space geometry of the MSSM electroweak sector. While this result appeared many years ago using techniques of computational algebraic geometry, it has never been demonstrated analytically. Here, we present an analytical derivation of the vacuum geometry of the electroweak theory by understanding how the F- and D-term relations lead to the Veronese surface. We moreover give a detailed description of this geometry, realising an extra branch as a zero-dimensional point when quadratic Higgs lifting deformations are incorporated into the superpotential.

Should providers be allowed to extra bill for uncovered services? Debate, resolution, and sequel in Japan.

PubMed

Ikegami, Naoki

2006-12-01

Japan has managed to provide universal coverage at relatively low cost by containing prices and restricting the conditions for which services can be billed in the compulsory social health insurance (SHI) program. However, decline in Japan's economic growth ushered in new actors backed by the prime minister who proposed that the providers should be allowed to extra bill for services not covered by the SHI. In 2004 they took the strategy of drawing the attention of the public to areas where the rigidity of the current prohibition appeared to be unfair and ridiculous. They were opposed by the Ministry of Health, Labor, and Welfare and the Japan Medical Association, who strongly objected on the grounds of safety and equity. The compromise reached by the two ministers in charge led to a clarification of the services that are to be covered and of the process for extending coverage to new procedures and drugs. The prohibition on extra billing has remained essentially unchanged, but the momentum for deregulation has been lost. In 2005 an alternate proposal was made to contain SHI expenditures by introducing a global cap on health expenditures and increasing out-of-pocket payment. Although this proposal was not fully adopted, the gradual decline in SHI benefit levels could lead to a renewed move to allow extra billing.

Convection's enhancement in thermal micro pipes using extra fluid and shape memory material

NASA Astrophysics Data System (ADS)

Mihai, Ioan; Sprinceana, Siviu

2016-12-01

Up to now, there have been developed various applications of thermal micro pipes[1-3], such as refrigerating systems, high heat flux electronics cooling, and biological devices etc., based on vacuum vaporization followed by a convective phenomenon that allows vapor transfer from the vaporization area to the condensation one. This article presents studies carried out on the enhancement of the convective phenomenon taking place in flat thermal micro pipes. The proposed method[4] is aimed at the cooling of power electronics components, such as microprocessors. The conducted research focused on the use of shape memory materials that allow, by a semi-active method, to bring extra fluid in the vaporization area of the thermal micro pipe. The conducted investigations analyzed the variation of the liquid layer thickness in the trapezoidal micro channels and the thermal flow change over time. The modification of liquid flow was studied in correlation with the capacity of the polysynthetic material to retain the most extra fluid in its pores. The enhancement of the convective heat transfer phenomenon in flat thermal micro pipes was investigated in correspondence to the increase of liquid quantity in the vaporization zone. The charts obtained by aid of Mathcad[5] allowed to represent the evolution during a period of time (or with the pipe's length) of the liquid film thickness, the flow and the thermal flow, as a function of the liquid supply variation due to the shape memory materials and the modification of the working temperature.

Reassessment of asymptomatic carriers of Plasmodium spp. in an endemic area with a very low incidence of malaria in extra-Amazonian Brazil.

PubMed

de Alencar, Filomena E C; Malafronte, Rosely Dos Santos; Cerutti, Crispim; Natal Fernandes, Lícia; Buery, Julyana Cerqueira; Fux, Blima; Rezende, Helder Ricas; Miranda, Angelica Espinosa

2017-11-09

Regions with residual transmission are potential obstacles to the elimination of malaria. It is, therefore, essential to understand the factors associated with the maintenance of endemic malaria in these areas. The objective was to investigate whether the status of asymptomatic carriers of Plasmodium spp. DNA is maintained in the long term in an extra-Amazonian region of Brazil with low incidence, residual malaria transmission. Asymptomatic carriers of Plasmodium DNA detected in a survey carried out between 2001 and 2004 were reassessed between 2010 and 2011 using questionnaires, PCR and thick and thin blood smear tests three times at 3-month intervals. Of the 48 carriers detected between 2001 and 2004, 37 were located. Of these, only two had positive PCR results and, as in the first survey, Plasmodium malariae DNA was detected. The findings suggest that untreated dwellers from this extra-Amazonian region, who initially harbour malaria parasites, may become negative without ever developing apparent symptoms of the disease. Although the possibility of re-infection cannot be ruled out, the finding of two individuals harbouring P. malariae, both in the first and in the second survey, may be compatible with a long-term carrier state for this parasite. Since most clinical cases of malaria in the region are a consequence of infection by Plasmodium vivax, the epidemiological impact of such long-term carriage would be limited.

Safety and Efficacy of Occlusion of Large Extra-Prostatic Anastomoses During Prostatic Artery Embolization for Symptomatic BPH

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amouyal, Gregory, E-mail: gregamouyal@hotmail.com; Chague, Pierre, E-mail: pierre.chague@gmail.com; Pellerin, Olivier, E-mail: olivier.pellerin@aphp.fr

IntroductionDuring PAE, preembolization angiography of the prostatic artery can show large extra-prostatic shunts, at high risk, if embolized, of rectal or penile necrosis. We report our experience with 11 consecutive patients who underwent protective embolization of large extra-prostatic shunts before successful PAE.Materials and MethodsWe treated 11 consecutive male patients (mean age 67 years), part of a series of 55 consecutive male patients referred for PAE to treat LUTS due to BPH, between December 2013 and January 2015. The procedure involved the exclusion of an extra-prostatic shunt originating from the PA, prior to complete bilateral PAE. We compared the safety and efficacymore » of the 11 shunt exclusions followed by embolization of the PA to the other 44 basic PAE. Clinical success was defined as a decrease of 25 % or eight points of IPSS, QoL <3 or a one-point decrease, and a Qmax improvement of 25 % or 2.5 mL/s.ResultsWe had a 100 % rate of occlusion of the anastomosis. Bilateral embolization of the PA was performed in all patients with no additional time of procedure (p = 0.18), but a significant increase of dose area product (p = 0.03). Distal (PErFecTED) embolization was possible in 64 %. There was no worsening of erectile dysfunction, no rectal or penile necrosis, no immediate or late other clinical complications. Clinical success was 91 % (mean follow-up: 3.5 months), compared to 78 % for the entire PAE group.ConclusionPAE using the protection technique in case of large extra-prostatic shunts is as safe and effective as basic procedures and does not induce any additional time of procedure.« less

'Treats', 'sometimes foods', 'junk': a qualitative study exploring 'extra foods' with parents of young children.

PubMed

Petrunoff, Nicholas A; Wilkenfeld, Rachel L; King, Lesley A; Flood, Victoria M

2014-05-01

The present study investigated parents' understanding and approaches to providing energy-dense and nutrient-poor 'extra foods' to pre-school children and explored variation between parents of low and high socio-economic status in relation to these issues. We conducted thirteen focus groups. Data were subject to framework analysis. Child-care centres in distinctly socially disadvantaged and socially advantaged areas. Eighty-eight parents of children aged 3-5 years. The three most common terms parents identified to describe foods that are not 'everyday foods' were 'treats', 'sometimes foods' and 'junk'. Parents' perceptions regarding what influences them in providing food to their children included seven sub-themes: (i) the influence of the child; (ii) food-related parenting practices; (iii) health considerations; (iv) food costs and convenience; (v) external factors perceived as influencing their child; (vi) factors related to child care; and (vii) social influences and occasions. Parents' decision-making processes regarding provision of 'extra foods' related to moderation and balance. Parents generally expressed the position that as long as a child is eating healthy foods, then treats are appropriate; and for many parents, this might apply frequently. All groups described the health of their child as an influence, but parents in low socio-economic groups were more likely to describe immediate concerns (dental health, behaviour) in relation to avoiding sugar-dense food or drink. The belief that provision of 'extra foods' can be frequent as long as children are eating a healthy balance of foods is factored into parents' decision making. Challenging this belief may be important for reducing the consumption of 'extra foods' by young children.

Stimulation-induced decreases in the diffusion of extra-vascular water in the human visual cortex: a window in time and space on mechanisms of brain water transport and economy.

PubMed

Baslow, Morris H; Hu, Caixia; Guilfoyle, David N

2012-07-01

In a human magnetic resonance diffusion-weighted imaging (DWI) investigation at 3 T and high diffusion sensitivity weighting (b = 1,800 s/mm(2)), which emphasizes the contribution of water in the extra-vascular compartment and minimizes that of the vascular compartment, we observed that visual stimulation with a flashing checkerboard at 8 Hz for a period of 600 s in eight subjects resulted in significant increases in DWI signals (mean +2.70%, range +0.51 to 8.54%). The increases in DWI signals in activated areas of the visual cortex indicated that during stimulation, the apparent diffusion coefficient (ADC) of extra-vascular compartment water decreased. In response to continuous stimulation, DWI signals gradually increased from pre-stimulation controls, leveling off after 400-500 s. During recovery from stimulation, DWI signals gradually decreased, approaching control levels in 300-400 s. In this study, we show for the first time that the effects of visual stimulation on DWI signals in the human visual cortex are cumulative over an extended period of time. We propose that these relatively slow stimulation-induced changes in the ADC of water in the extra-vascular compartment are due to transient changes in the ratio of faster diffusing free water to slower diffusing bound water and reflect brain water transport processes between the vascular and extra-vascular compartments at the cellular level. The nature of these processes including possible roles of the putative glucose water import and N-acetylaspartate water export molecular water pumps in brain function are discussed.

Executive dysfunction and the relation with behavioral problems in children with 47,XXY and 47,XXX.

PubMed

van Rijn, S; Swaab, H

2015-02-01

Neuroimaging studies have shown that having an extra X chromosome is associated with abnormal structure and function of brain areas in the frontal lobe, which is crucially involved in executive functioning. However, there is little of knowledge of the type and severity of executive dysfunction, and the impact on emotional and behavioral problems. The present study aims to provide in this. In total, 40 children (23 boys with 47,XXY and 17 girls with 47,XXX) with an extra X chromosome and 100 non-clinical controls (47 boys and 53 girls) participated in the study. The participants were 9-18 years old. Processing speed and executive functioning were assessed using the Amsterdam Neuropsychological Testbattery (ANT) and the Dysexecutive Questionnaire (DEX). Problems in emotional and behavioral functioning were assessed with the Childhood Behavior Checklist (CBCL). Children with an extra X chromosome showed deficits in inhibition, mental flexibility, sustained attention and visual working memory. Parental report showed high levels of everyday manifestations of executive dysfunction. More severe inhibition difficulties were associated with higher levels of thought problems, aggression and rule breaking behavior. Boys and girls with an extra X chromosome could not be differentiated based on severity of executive dysfunction, however, girls had lower information processing speed than boys. These findings suggest that executive dysfunction may be part of the phenotype of children with an extra X chromosome, impacting the ability to function adequately in everyday life. Furthermore, children with impairments in inhibition may have more problems in regulating their thinking, emotions and behavior. © 2015 John Wiley & Sons Ltd and International Behavioural and Neural Genetics Society.

The impact of involvement of biomedical scientists in specimen dissection and selection of blocks for histopathology: a study of time benefits and specimen handling quality in Ayrshire and Arran area laboratory

PubMed Central

Duthie, F R; Nairn, E R; Milne, A W; McTaggart, V; Topping, D

2004-01-01

Aims: To assess possible time benefits of specimen dissection by biomedical scientists (BMSs) and the quality of specimen handling by BMSs, in a department where BMSs trim those specimens requiring simple descriptions, from which standard blocks are taken. Methods: Specimen handling by BMSs and consultant pathologists was compared. Time taken for each specimen trimmed was recorded prospectively. To determine specimen handling quality, adherence to dissection standard operating procedures (SOPs) was assessed by recording retrospectively whether or not each action in the SOP had been performed. Information on subsequently required extra levels or blocks was recorded. Results: Analysis of data from 672 specimens trimmed by consultants showed that any given action in the SOPs was performed on average on 60.2% of applicable/assessable specimens; for 660 similar specimens trimmed by BMSs, each action was performed on average on 80.1% of specimens. Of the specimens where data on extra blocks were recorded, extra blocks were required in 3% of those trimmed by pathologists and in 4% of those trimmed by BMSs. Extra levels were required in 12% of those trimmed by pathologists and in 16% of those trimmed by BMSs. BMS trimming saves 16 hours of consultant time each month. The difference between pathologists and BMSs in time for each specimen trimmed is negligible. Conclusions: The advantages of increased adherence to trimming SOPs and saving consultant time outweigh the relatively small number of extra blocks and levels required when BMSs trim. There is no reduction in quality of dissection. PMID:14693831

Prophylometric and SEM analyses of four different finishing methods

PubMed Central

CHIODERA, G.; CERUTTI, F.; CERUTTI, A.; PUTIGNANO, A.; MANGANI, F.

2013-01-01

Summary Adhesion is the pivot of the modern restorative dentistry. Inlays, onlays and veneers have become a valid alternative to the traditional prosthetic treatments even in the rehabilitation of extremely damaged teeth, allowing a consistent saving of sound tooth tissues. Composite resins and dental adhesive are continously investigated and improved, nevertheless the optimization of the tooth-adhesive interface has to be considered: in fact, the long-term stability of adhesion between tooth and composite material depends on the treatment of the amelo-dentinal surfaces. This study investigated the quality of the occlusal walls of a cavity prepared to receive an inlay and finished with four different systems: thin and extra-thin diamond coated burs, a 12-blades carbide burs and a diamond-coated tip driven by sonic instrument. Consequently, prophylometric and SEM analyses were performed on the samples. The average roughness values recorded by the prophylometer were expressed by the parameters Ra and RZ: there is a correspondence between the numeric values and the pictures of the SEM. The results show a better quality (low roughness values) of the surface treated with multi-blade burs, followed by the this and extra-thin diamond coated burs. The 25 micron diamond-coated tip of the sonic instrument obtains the roughest surface and a sensibly higher amount of smear layer than the other tested systems. PMID:23741601

Effects of dentin surface treatments on shear bond strength of glass-ionomer cements

PubMed Central

Poggio, Claudio; Beltrami, Riccardo; Scribante, Andrea; Colombo, Marco; Lombardini, Marco

2014-01-01

Summary Aim The aim of this in vitro study was to evaluate the effect of different surface treatments on shear bond strength of a conventional glass-ionomer cement (GIC) and a resin-modified glass-ionomer cement (RMGIC) to dentin. Materials and methods 80 bovine permanent incisors were used. 40 cylindrical specimens of a GIC (Fuji IX GP Extra) and 40 cylindrical specimens of a RMGIC (Fuji II LC) were attached to the dentin. The teeth were then randomly assigned to 8 groups of equal size (n=10), 4 for every type of glass-ionomer cement, corresponding to type of dentin surface treatments. Group 1: GC Cavity Conditioner; Group 2: 37% phosphoric acid gel; Group 3: Clearfil SE Bond; Group 4: no dentin conditioning (control). The specimens were placed in a universal testing machine (Model 3343, Instron Corp., Canton, Mass., USA) and subsequently tested for shear bond strength (MPa). Results ANOVA showed the presence of significant differences among the various groups. Post hoc Tukey test showed different values of shear bond strength for Fuji IX GP Extra and for Fuji II LC. The different conditioners variably influence the adhesion of the glass-ionomer cements tested. Conclusions. RMGIC shear bond to dentin was higher than GIC. The use of a Self-etch adhesive system improved the shear bond strength values of RMGIC and lowered the shear bond strength values of GIC significantly. PMID:24753797

[Posttraumatic deformities of the knee joint : Intra-articular osteotomy after malreduction of tibial head fractures].

PubMed

Frosch, K-H; Krause, M; Frings, J; Drenck, T; Akoto, R; Müller, G; Madert, J

2016-10-01

Malreduction of tibial head fractures often leads to malalignment of the lower extremity, pain, limited range of motion and instability. The extent of the complaints and the degree of deformity requires an exact analysis and a standardized approach. True ligamentous instability should be distinguished from pseudoinstability of the joint. Also extra- and intra-articular deformities have to be differentiated. In intra-articular deformities the extent of articular surface displacement, defects and clefts must be accurately evaluated. A specific surgical approach is necessary, which allows adequate visualization, correct osteotomy and refixation of the fractured area of the tibial head. In the long-term course good clinical results are described for intra-articular osteotomies. If the joint is damaged to such an extent that it cannot be reconstructed or in cases of advanced posttraumatic osteoarthritis, total knee arthroplasty may be necessary; however, whenever possible and reasonable, anatomical reconstruction and preservation of the joint should be attempted.

Efficient and stable exponential time differencing Runge-Kutta methods for phase field elastic bending energy models

NASA Astrophysics Data System (ADS)

Wang, Xiaoqiang; Ju, Lili; Du, Qiang

2016-07-01

The Willmore flow formulated by phase field dynamics based on the elastic bending energy model has been widely used to describe the shape transformation of biological lipid vesicles. In this paper, we develop and investigate some efficient and stable numerical methods for simulating the unconstrained phase field Willmore dynamics and the phase field Willmore dynamics with fixed volume and surface area constraints. The proposed methods can be high-order accurate and are completely explicit in nature, by combining exponential time differencing Runge-Kutta approximations for time integration with spectral discretizations for spatial operators on regular meshes. We also incorporate novel linear operator splitting techniques into the numerical schemes to improve the discrete energy stability. In order to avoid extra numerical instability brought by use of large penalty parameters in solving the constrained phase field Willmore dynamics problem, a modified augmented Lagrange multiplier approach is proposed and adopted. Various numerical experiments are performed to demonstrate accuracy and stability of the proposed methods.

Belite cement clinker from coal fly ash of high Ca content. Optimization of synthesis parameters.

PubMed

Guerrero, A; Goñi, S; Campillo, I; Moragues, A

2004-06-01

The optimization of parameters of synthesis of belite cement clinker from coal fly ash of high Ca content is presented in this paper. The synthesis process is based on the hydrothermal-calcination-route of the fly ash without extra additions. The hydrothermal treatment was carried out in demineralized water and a 1 M NaOH solution for 4 h at the temperatures of 100 degrees C, 150 degrees C, and 200 degrees C. The precursors obtained during the hydrothermal treatmentwere heated at temperatures of 700 degrees C, 800 degrees C, 900 degrees C, and 1000 degrees C. The changes of fly ash composition after the different treatments were characterized by X-ray diffraction (XRD), FT infrared (FTIR) spectroscopy, surface area (BET-N2), and thermal analyses. From the results obtained we concluded that the optimum temperature of the hydrothermal treatment was 200 degrees C, and the optimum temperature for obtaining the belite cement clinker was 800 degrees C.

An isoline separating relatively warm from relatively cool wintertime forest surface temperatures for the southeastern United States

NASA Astrophysics Data System (ADS)

Wickham, J.; Wade, T. G.; Riitters, K. H.

2014-09-01

Forest-oriented climate mitigation policies promote forestation as a means to increase uptake of atmospheric carbon to counteract global warming. Some have pointed out that a carbon-centric forest policy may be overstated because it discounts biophysical aspects of the influence of forests on climate. In extra-tropical regions, many climate models have shown that forests tend to be warmer than grasslands and croplands because forest albedos tend to be lower than non-forest albedos. A lower forest albedo results in higher absorption of solar radiation and increased sensible warming that is not offset by the cooling effects of carbon uptake in extra-tropical regions. However, comparison of forest warming potential in the context of climate models is based on a coarse classification system of tropical, temperate, and boreal. There is considerable variation in climate within the broad latitudinal zonation of tropical, temperate, and boreal, and the relationship between biophysical (albedo) and biogeochemical (carbon uptake) mechanisms may not be constant within these broad zones. We compared wintertime forest and non-forest surface temperatures for the southeastern United States and found that forest surface temperatures shifted from being warmer than non-forest surface temperatures north of approximately 36°N to cooler south of 36°N. Our results suggest that the biophysical aspects of forests' influence on climate reinforce the biogeochemical aspects of forests' influence on climate south of 36°N. South of 36°N, both biophysical and biogeochemical properties of forests appear to support forestation as a climate mitigation policy. We also provide some quantitative evidence that evergreen forests tend to have cooler wintertime surface temperatures than deciduous forests that may be attributable to greater evapotranspiration rates.

High-definition micropatterning method for hard, stiff and brittle polymers.

PubMed

Zhao, Yiping; Truckenmuller, Roman; Levers, Marloes; Hua, Wei-Shu; de Boer, Jan; Papenburg, Bernke

2017-02-01

Polystyrene (PS) is the most commonly used material in cell culture devices, such as Petri dishes, culture flasks and well plates. Micropatterning of cell culture substrates can significantly affect cell-material interactions leading to an increasing interest in the fabrication of topographically micro-structured PS surfaces. However, the high stiffness combined with brittleness of PS (elastic modulus 3-3.5GPa) makes high-quality patterning into PS difficult when standard hard molds, e.g. silicon and nickel, are used as templates. A new and robust scheme for easy processing of large-area high-density micro-patterning into PS film is established using nanoimprinting lithography and standard hot embossing techniques. Including an extra step through an intermediate PDMS mold alone does not result in faithful replication of the large area, high-density micropattern into PS. Here, we developed an approach using an additional intermediate mold out of OrmoStamp, which allows for high-quality and large-area micro-patterning into PS. OrmoStamp was originally developed for UV nanoimprint applications; this work demonstrates for the first time that OrmoStamp is a highly adequate material for micro-patterning of PS through hot embossing. Our proposed processing method achieves high-quality replication of micropatterns in PS, incorporating features with high aspect ratio (4:1, height:width), high density, and over a large pattern area. The proposed scheme can easily be adapted for other large-area and high-density micropatterns of PS, as well as other stiff and brittle polymers. Copyright © 2016 Elsevier B.V. All rights reserved.

Ethnicity and High School Student Achievement across Rural and Urban Districts.

ERIC Educational Resources Information Center

Maestas, Leo Carlos

1981-01-01

Cultural values must be identified and cultural orientations must be accurately reflected in school evaluations. The U.S. Commission on Civil Rights shows that in five achievement areas--school holding power, reading achievement, grade repetition, overageness, and participation in extra-curricular activities--Mexican Americans performed…

77 FR 47372 - New England Fishery Management Council; Public Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-08

... species and area- based `extra-SASI' materials intended to support decision making related to adverse...). Recommendations from this group will be brought to the full Council for formal consideration and action, if... group for discussion, those issues may not be the subject of formal action during this meeting. Action...

Organizing the "Productive Transformation of Knowledge": Linking University and Industry in Traditional Manufacturing Areas

ERIC Educational Resources Information Center

Balduzzi, Giacomo; Rostan, Michele

2016-01-01

The article aims at underlining the role played by extra-academic and autonomous organizations strongly connected with university institutions and researchers in producing, acquiring, transferring and transforming knowledge. The study examines a particular Italian case, the "Politecnico Calzaturiero", a private institution providing…

The Science in Science Fiction.

ERIC Educational Resources Information Center

Nicholls, Peter, Ed.

This 12-chapter book discusses the scientific facts behind the ideas included in the novels of Robert Heinlein, Isaac Asimov, Frederik Pohl, Arthur C. Clark and other science fiction writers. Areas explored in the first 11 chapters include: exploration of deep space; energy and exotic power sources; likelihood of extra-terrestrial life and the…

A Case Study of ROI in Organizational Performance of Working at Home

ERIC Educational Resources Information Center

Phillips, Jack; Phillips, Patti; Robinson, Rachel

2013-01-01

With the growing suburban population, many employees in metro areas are facing long commutes to and from the workplace. According to the 2011 Texas Transportation Institute's Urban Mobility Report, the average commuter experiences 34 hours of delay per year and spends an extra $713 on fuel (see…

Planning Guidelines for Primary Schools, Issue 1.

ERIC Educational Resources Information Center

Department of Education and Science, Tullamore (Ireland). Planning and Building Unit.

This planning guide, reflecting recent changes in the educational system in Ireland, offers guidelines for designing primary schools that need to provide additional space for the growing range of teaching and support services. It addresses increased sizes of general purpose rooms, extra floor area provision for classroom storage, administration,…

Toward a hyperspectral optical signature of extra virgin olive oil

NASA Astrophysics Data System (ADS)

Mignani, A. G.; Ciaccheri, L.; Thienpont, H.; Ottevaere, H.; Attilio, C.; Cimato, A.

2007-05-01

Italian extra virgin olive oils bearing labels of certified area of origin were considered. Their multispectral digital signature was measured by means of absorption spectroscopy in the 200-1700 nm spectral range. The instrumentation was a fiber optic-based, cheap, and compact device. The spectral data were processed by means of multivariate analysis and plotted on a 2D classification map. The map showed sharp clusters according to the geographical origin of the oils, thus demonstrating the potentials of UV-VIS-NIR spectroscopy for optical fingerprinting. Then, the spectral data were correlated to the content of the most important fatty acids. The good fitting achieved demonstrated that the optical fingerprinting can be used also for predicting nutritional and chemical parameters.

Evaluating scale and roughness effects in urban flood modelling using terrestrial LIDAR data

NASA Astrophysics Data System (ADS)

Ozdemir, H.; Sampson, C. C.; de Almeida, G. A. M.; Bates, P. D.

2013-10-01

This paper evaluates the results of benchmark testing a new inertial formulation of the St. Venant equations, implemented within the LISFLOOD-FP hydraulic model, using different high resolution terrestrial LiDAR data (10 cm, 50 cm and 1 m) and roughness conditions (distributed and composite) in an urban area. To examine these effects, the model is applied to a hypothetical flooding scenario in Alcester, UK, which experienced surface water flooding during summer 2007. The sensitivities of simulated water depth, extent, arrival time and velocity to grid resolutions and different roughness conditions are analysed. The results indicate that increasing the terrain resolution from 1 m to 10 cm significantly affects modelled water depth, extent, arrival time and velocity. This is because hydraulically relevant small scale topography that is accurately captured by the terrestrial LIDAR system, such as road cambers and street kerbs, is better represented on the higher resolution DEM. It is shown that altering surface friction values within a wide range has only a limited effect and is not sufficient to recover the results of the 10 cm simulation at 1 m resolution. Alternating between a uniform composite surface friction value (n = 0.013) or a variable distributed value based on land use has a greater effect on flow velocities and arrival times than on water depths and inundation extent. We conclude that the use of extra detail inherent in terrestrial laser scanning data compared to airborne sensors will be advantageous for urban flood modelling related to surface water, risk analysis and planning for Sustainable Urban Drainage Systems (SUDS) to attenuate flow.

Evaluating scale and roughness effects in urban flood modelling using terrestrial LIDAR data

NASA Astrophysics Data System (ADS)

Ozdemir, H.; Sampson, C. C.; de Almeida, G. A. M.; Bates, P. D.

2013-05-01

This paper evaluates the results of benchmark testing a new inertial formulation of the de St. Venant equations, implemented within the LISFLOOD-FP hydraulic model, using different high resolution terrestrial LiDAR data (10 cm, 50 cm and 1 m) and roughness conditions (distributed and composite) in an urban area. To examine these effects, the model is applied to a hypothetical flooding scenario in Alcester, UK, which experienced surface water flooding during summer 2007. The sensitivities of simulated water depth, extent, arrival time and velocity to grid resolutions and different roughness conditions are analysed. The results indicate that increasing the terrain resolution from 1 m to 10 cm significantly affects modelled water depth, extent, arrival time and velocity. This is because hydraulically relevant small scale topography that is accurately captured by the terrestrial LIDAR system, such as road cambers and street kerbs, is better represented on the higher resolution DEM. It is shown that altering surface friction values within a wide range has only a limited effect and is not sufficient to recover the results of the 10 cm simulation at 1 m resolution. Alternating between a uniform composite surface friction value (n = 0.013) or a variable distributed value based on land use has a greater effect on flow velocities and arrival times than on water depths and inundation extent. We conclude that the use of extra detail inherent in terrestrial laser scanning data compared to airborne sensors will be advantageous for urban flood modelling related to surface water, risk analysis and planning for Sustainable Urban Drainage Systems (SUDS) to attenuate flow.

Evaporative cooling over the Tibetan Plateau induced by vegetation growth.

PubMed

Shen, Miaogen; Piao, Shilong; Jeong, Su-Jong; Zhou, Liming; Zeng, Zhenzhong; Ciais, Philippe; Chen, Deliang; Huang, Mengtian; Jin, Chun-Sil; Li, Laurent Z X; Li, Yue; Myneni, Ranga B; Yang, Kun; Zhang, Gengxin; Zhang, Yangjian; Yao, Tandong

2015-07-28

In the Arctic, climate warming enhances vegetation activity by extending the length of the growing season and intensifying maximum rates of productivity. In turn, increased vegetation productivity reduces albedo, which causes a positive feedback on temperature. Over the Tibetan Plateau (TP), regional vegetation greening has also been observed in response to recent warming. Here, we show that in contrast to arctic regions, increased growing season vegetation activity over the TP may have attenuated surface warming. This negative feedback on growing season vegetation temperature is attributed to enhanced evapotranspiration (ET). The extra energy available at the surface, which results from lower albedo, is efficiently dissipated by evaporative cooling. The net effect is a decrease in daily maximum temperature and the diurnal temperature range, which is supported by statistical analyses of in situ observations and by decomposition of the surface energy budget. A daytime cooling effect from increased vegetation activity is also modeled from a set of regional weather research and forecasting (WRF) mesoscale model simulations, but with a magnitude smaller than observed, likely because the WRF model simulates a weaker ET enhancement. Our results suggest that actions to restore native grasslands in degraded areas, roughly one-third of the plateau, will both facilitate a sustainable ecological development in this region and have local climate cobenefits. More accurate simulations of the biophysical coupling between the land surface and the atmosphere are needed to help understand regional climate change over the TP, and possible larger scale feedbacks between climate in the TP and the Asian monsoon system.

Evaporative cooling over the Tibetan Plateau induced by vegetation growth

PubMed Central

Shen, Miaogen; Piao, Shilong; Jeong, Su-Jong; Zhou, Liming; Zeng, Zhenzhong; Ciais, Philippe; Chen, Deliang; Huang, Mengtian; Jin, Chun-Sil; Li, Laurent Z. X.; Li, Yue; Myneni, Ranga B.; Yang, Kun; Zhang, Gengxin; Zhang, Yangjian; Yao, Tandong

2015-01-01

In the Arctic, climate warming enhances vegetation activity by extending the length of the growing season and intensifying maximum rates of productivity. In turn, increased vegetation productivity reduces albedo, which causes a positive feedback on temperature. Over the Tibetan Plateau (TP), regional vegetation greening has also been observed in response to recent warming. Here, we show that in contrast to arctic regions, increased growing season vegetation activity over the TP may have attenuated surface warming. This negative feedback on growing season vegetation temperature is attributed to enhanced evapotranspiration (ET). The extra energy available at the surface, which results from lower albedo, is efficiently dissipated by evaporative cooling. The net effect is a decrease in daily maximum temperature and the diurnal temperature range, which is supported by statistical analyses of in situ observations and by decomposition of the surface energy budget. A daytime cooling effect from increased vegetation activity is also modeled from a set of regional weather research and forecasting (WRF) mesoscale model simulations, but with a magnitude smaller than observed, likely because the WRF model simulates a weaker ET enhancement. Our results suggest that actions to restore native grasslands in degraded areas, roughly one-third of the plateau, will both facilitate a sustainable ecological development in this region and have local climate cobenefits. More accurate simulations of the biophysical coupling between the land surface and the atmosphere are needed to help understand regional climate change over the TP, and possible larger scale feedbacks between climate in the TP and the Asian monsoon system. PMID:26170316

Geographical information system (GIS) modeling territory receptivity to strengthen entomological surveillance: Anopheles (Nyssorhynchus) case study in Rio de Janeiro State, Brazil.

PubMed

Albuquerque, Hermano Gomes; Peiter, Paulo Cesar; Toledo, Luciano M; Alencar, Jeronimo A F; Sabroza, Paulo C; Dias, Cristina G; Santos, Jefferson P C; Suárez-Mutis, Martha C

2018-04-19

Extra-Amazonian malaria mortality is 60 times higher than the Amazon malaria mortality. Imported cases correspond to approximately 90% of extra-Amazonian cases. Imported malaria could be a major problem if it occurs in areas with receptivity, because it can favor the occurrence of outbreaks or reintroductions of malaria in those areas. This study aimed to model territorial receptivity for malaria to serve as an entomological surveillance tool in the State of Rio de Janeiro, Brazil. Geomorphology, rainfall, temperature, and vegetation layers were used in the AHP process for the receptivity stratification of Rio de Janeiro State territory. The model predicted five receptivity classes: very low, low, medium, high and very high. The 'very high' class is the most important in the receptivity model, corresponding to areas with optimal environmental and climatological conditions to provide suitable larval habitats for Anopheles (Nyssorhynchus) vectors. This receptivity class covered 497.14 km 2 or 1.18% of the state's area. The 'high' class covered the largest area, 17,557.98 km 2 , or 41.62% of the area of Rio de Janeiro State. We used freely available databases for modeling the distribution of receptive areas for malaria transmission in the State of Rio de Janeiro. This was a new and low-cost approach to support entomological surveillance efforts. Health workers in 'very high' and 'high' receptivity areas should be prepared to diagnose all febrile individuals and determine the cause of the fever, including malaria. Each malaria case must be treated and epidemiological studies must be conducted to prevent the reintroduction of the disease.

Extra-terrestrial construction processes - Advancements, opportunities and challenges

NASA Astrophysics Data System (ADS)

Lim, Sungwoo; Prabhu, Vibha Levin; Anand, Mahesh; Taylor, Lawrence A.

2017-10-01

Government space agencies, including NASA and ESA, are conducting preliminary studies on building alternative space-habitat systems for deep-space exploration. Such studies include development of advanced technologies for planetary surface exploration, including an in-depth understanding of the use of local resources. Currently, NASA plans to land humans on Mars in the 2030s. Similarly, other space agencies from Europe (ESA), Canada (CSA), Russia (Roscosmos), India (ISRO), Japan (JAXA) and China (CNSA) have already initiated or announced their plans for launching a series of lunar missions over the next decade, ranging from orbiters, landers and rovers for extended stays on the lunar surface. As the Space Odyssey is one of humanity's oldest dreams, there has been a series of research works for establishing temporary or permanent settlement on other planetary bodies, including the Moon and Mars. This paper reviews current projects developing extra-terrestrial construction, broadly categorised as: (i) ISRU-based construction materials; (ii) fabrication methods; and (iii) construction processes. It also discusses four categories of challenges to developing an appropriate construction process: (i) lunar simulants; (ii) material fabrication and curing; (iii) microwave-sintering based fabrication; and (iv) fully autonomous and scaled-up construction processes.

The evolution of organic matter in space.

PubMed

Ehrenfreund, Pascale; Spaans, Marco; Holm, Nils G

2011-02-13

Carbon, and molecules made from it, have already been observed in the early Universe. During cosmic time, many galaxies undergo intense periods of star formation, during which heavy elements like carbon, oxygen, nitrogen, silicon and iron are produced. Also, many complex molecules, from carbon monoxide to polycyclic aromatic hydrocarbons, are detected in these systems, like they are for our own Galaxy. Interstellar molecular clouds and circumstellar envelopes are factories of complex molecular synthesis. A surprisingly high number of molecules that are used in contemporary biochemistry on the Earth are found in the interstellar medium, planetary atmospheres and surfaces, comets, asteroids and meteorites and interplanetary dust particles. Large quantities of extra-terrestrial material were delivered via comets and asteroids to young planetary surfaces during the heavy bombardment phase. Monitoring the formation and evolution of organic matter in space is crucial in order to determine the prebiotic reservoirs available to the early Earth. It is equally important to reveal abiotic routes to prebiotic molecules in the Earth environments. Materials from both carbon sources (extra-terrestrial and endogenous) may have contributed to biochemical pathways on the Earth leading to life's origin. The research avenues discussed also guide us to extend our knowledge to other habitable worlds.

Vibration-enhanced posture stabilization achieved by tactile supplementation: may blind individuals get extra benefits?

PubMed

Magalhães, Fernando Henrique; Kohn, André Fabio

2011-08-01

Diminished balance ability poses a serious health risk due to the increased likelihood of falling, and impaired postural stability is significantly associated with blindness and poor vision. Noise stimulation (by improving the detection of sub-threshold somatosensory information) and tactile supplementation (i.e., additional haptic information provided by an external contact surface) have been shown to improve the performance of the postural control system. Moreover, vibratory noise added to the source of tactile supplementation (e.g., applied to a surface that the fingertip touches) has been shown to enhance balance stability more effectively than tactile supplementation alone. In view of the above findings, in addition to the well established consensus that blind subjects show superior abilities in the use of tactile information, we hypothesized that blind subjects may take extra benefits from the vibratory noise added to the tactile supplementation and hence show greater improvements in postural stability than those observed for sighted subjects. If confirmed, this hypothesis may lay the foundation for the development of noise-based assistive devices (e.g., canes, walking sticks) for improving somatosensation and hence prevent falls in blind individuals. Copyright © 2011 Elsevier Ltd. All rights reserved.

Survival of porcine reproductive and respiratory syndrome virus in houseflies.

PubMed

Otake, Satoshi; Dee, Scott A; Moon, Roger D; Rossow, Kurt D; Trincado, Carlos; Farnham, MacDonald; Pijoan, Carlos

2003-07-01

The objectives of the study were to determine the duration of porcine reproductive and respiratory syndrome virus (PRRSV) survival in houseflies (Musca domestica Linnaeus) following feeding on an infected pig, and to determine whether the virus was present on the exterior surface or within the internal viscera of the fly. A total of 210 laboratory-colonized houseflies were allowed to feed to repletion on a pig, experimentally infected with PRRSV on day 7 postinoculation, and then maintained alive under laboratory conditions (27 degrees C). Two subsets (A and B) of 30 flies were collected at each of the following sampling points; 0, 6, and 12 hours post feeding (pf). Subset A contained an extra group of 30 flies collected at 24 hours pf due to the availability of extra flies. Flies in subset A were processed as whole fly homogenates, while the exterior surface washes and digestive organs were collected from flies in subset B. Whole fly homogenates, collected at 0, 6, and 12 hours pf, were positive by both polymerase chain reaction (PCR) and swine bioassay. Digestive organs, collected at 0 and 12 hours pf, were positive by PCR and swine bioassay. The PRRSV RNA was detected by PCR from the exterior surface wash of subset B flies collected at 0, 6, and 12 hours pf; however, only the subset collected at 0 hour pf was swine bioassay-positive. This study indicates that infectious PRRSV can survive within the intestinal tract of houseflies for up to 12 hours following feeding on an infected pig, but only for a short period on the exterior surface of the flies.

The influence of global sea surface temperature variability on the large-scale land surface temperature

NASA Astrophysics Data System (ADS)

Tyrrell, Nicholas L.; Dommenget, Dietmar; Frauen, Claudia; Wales, Scott; Rezny, Mike

2015-04-01

In global warming scenarios, global land surface temperatures () warm with greater amplitude than sea surface temperatures (SSTs), leading to a land/sea warming contrast even in equilibrium. Similarly, the interannual variability of is larger than the covariant interannual SST variability, leading to a land/sea contrast in natural variability. This work investigates the land/sea contrast in natural variability based on global observations, coupled general circulation model simulations and idealised atmospheric general circulation model simulations with different SST forcings. The land/sea temperature contrast in interannual variability is found to exist in observations and models to a varying extent in global, tropical and extra-tropical bands. There is agreement between models and observations in the tropics but not the extra-tropics. Causality in the land-sea relationship is explored with modelling experiments forced with prescribed SSTs, where an amplification of the imposed SST variability is seen over land. The amplification of to tropical SST anomalies is due to the enhanced upper level atmospheric warming that corresponds with tropical moist convection over oceans leading to upper level temperature variations that are larger in amplitude than the source SST anomalies. This mechanism is similar to that proposed for explaining the equilibrium global warming land/sea warming contrast. The link of the to the dominant mode of tropical and global interannual climate variability, the El Niño Southern Oscillation (ENSO), is found to be an indirect and delayed connection. ENSO SST variability affects the oceans outside the tropical Pacific, which in turn leads to a further, amplified and delayed response of.

Effect of whitening dentifrices on the surface roughness of a nanohybrid composite resin

PubMed Central

da Rosa, Gabriela Migliorin; da Silva, Luciana Mendonça; de Menezes, Márcio; do Vale, Hugo Felipe; Regalado, Diego Ferreira; Pontes, Danielson Guedes

2016-01-01

Objectives: The present study verified the influence of whitening dentifrices on the surface roughness of a nanohybrid composite resin. Materials and Methods: Thirty-two specimens were prepared with Filtek™ Z350 XT (3M/ESPE) and randomly divided into four groups (n = 08) that were subjected to brushing simulation equivalent to the period of 1 month. The groups assessed were a control group with distilled water (G1), Colgate Total 12 Professional Clean (G2), Sensodyne Extra Whitener Extra Fresh (G3), and Colgate Luminous White (G4). A sequence of 90 cycles was performed for all the samples. The initial roughness of each group was analyzed by the Surface Roughness Tester (TR 200-TIME Group Inc., CA, USA). After the brushing period, the final roughness was measured, and the results were statistically analyzed using nonparametric Kruskal–Wallis and Dunn tests for intergroup roughness comparison in the time factor. For intragroup and “Δ Final − Initial” comparisons, the Wilcoxon test and (one-way) ANOVA were, respectively, performed (α = 0.05). Results: The roughness mean values before and after brushing showed no statistically significant difference when the different dentifrices were used. None of the dentifrices analyzed increased significantly the nanohybrid composite resin surface roughness in a 1 month of tooth brushing simulation. Conclusions: These results suggest that no hazardous effect on the roughness of nanohybrid composite resin can be expected when whitening dentifrices are used for a short period. Similar studies should be conducted to analyze other esthetic composite materials. PMID:27095891

Nano-micro carbon spheres anchored on porous carbon derived from dual-biomass as high rate performance supercapacitor electrodes

NASA Astrophysics Data System (ADS)

Liu, Shaobo; Zhao, Yang; Zhang, Baihui; Xia, Hui; Zhou, Jianfei; Xie, Wenke; Li, Hongjian

2018-03-01

Hierarchical nano-micro carbon spheres@rice straw-derived porous carbon composites are successfully synthesized by the in situ decoration of the porous carbon with carbon spheres from glucose under the assistance of cetyltrimethyl ammonium bromide micelles and further activated by KOH. The scanning electron microscope images clearly show the carbon spheres disperse homogeneously and orderly onto the surface and in the inner macropores of the porous carbon. The diameter of the carbon spheres varies from 475 nm to 1.6 μm, which can be easily controlled by introducing extra inducing agent. The optimal composites exhibit a large specific surface area (1122 m2 g-1), rich content of oxygen (14.2 wt %), and tunable hierarchical porous structure. When used as supercapacitor electrodes, the novel composites with abundant fruits present a high specific capacitance of 337 F g-1 at 1 A g-1, excellent rate retention of 83% from 1 to 20 A g-1 and a good cycling stability with 96% capacitance retention after 10000 cycles. In this strategy, the thought of shared ion-buffering reservoirs is proposed and the mutual promotion effects between the carbon spheres and porous carbon in the composites are also practically demonstrated to contribute the enhanced electrochemical performances.

Mesoporous Three-Dimensional Graphene Networks for Highly Efficient Solar Desalination under 1 sun Illumination.

PubMed

Kim, Kwanghyun; Yu, Sunyoung; An, Cheolwon; Kim, Sung-Wook; Jang, Ji-Hyun

2018-05-09

Solar desalination via thermal evaporation of seawater is one of the most promising technologies for addressing the serious problem of global water scarcity because it does not require additional supporting energy other than infinite solar energy for generating clean water. However, low efficiency and a large amount of heat loss are considered critical limitations of solar desalination technology. The combination of mesoporous three-dimensional graphene networks (3DGNs) with a high solar absorption property and water-transporting wood pieces with a thermal insulation property has exhibited greatly enhanced solar-to-vapor conversion efficiency. 3DGN deposited on a wood piece provides an outstanding value of solar-to-vapor conversion efficiency, about 91.8%, under 1 sun illumination and excellent desalination efficiency of 5 orders salinity decrement. The mass-producible 3DGN enriched with many mesopores efficiently releases the vapors from an enormous area of the surface by heat localization on the top surface of the wood piece. Because the efficient solar desalination device made by 3DGN on the wood piece is highly scalable and inexpensive, it could serve as one of the main sources for the worldwide supply of purified water achieved via earth-abundant materials without an extra supporting energy source.

Bridging Redox Species-Coated Graphene Oxide Sheets to Electrode for Extending Battery Life Using Nanocomposite Electrolyte.

PubMed

Huang, Yi Fu; Ruan, Wen Hong; Lin, Dong Ling; Zhang, Ming Qiu

2017-01-11

Substituting conventional electrolyte for redox electrolyte has provided a new intriguing method for extending battery life. The efficiency of utilizing the contained redox species (RS) in the redox electrolyte can benefit from increasing the specific surface area of battery electrodes from the electrode side of the electrode-electrolyte interface, but is not limited to that. Herein, a new strategy using nanocomposite electrolyte is proposed to enlarge the interface with the aid of nanoinclusions from the electrolyte side. To do this, graphene oxide (GO) sheets are first dispersed in the electrolyte solution of tungstosilicic salt/lithium sulfate/poly(vinyl alcohol) (SiWLi/Li 2 SO 4 /PVA), and then the sheets are bridged to electrode, after casting and evaporating the solution on the electrode surface. By applying in situ conductive atomic force microscopy and Raman spectra, it is confirmed that the GO sheets doped with RS of SiWLi/Li 2 SO 4 can be bridged and electrically reduced as an extended electrode-electrolyte interface. As a result, the RS-coated GO sheets bridged to LiTi 2 (PO 4 ) 3 //LiMn 2 O 4 battery electrodes are found to deliver extra energy capacity (∼30 mAh/g) with excellent electrochemical cycling stability, which successfully extends the battery life by over 50%.

Localized surface plasmon resonances dominated giant lateral photovoltaic effect observed in ZnO/Ag/Si nanostructure

PubMed Central

Zhang, Ke; Wang, Hui; Gan, Zhikai; Zhou, Peiqi; Mei, Chunlian; Huang, Xu; Xia, Yuxing

2016-01-01

We report substantially enlarged lateral photovoltaic effect (LPE) in the ZnO/Ag/Si nanostructures. The maximum LPE sensitivity (55.05 mv/mm) obtained in this structure is about seven times larger than that observed in the control sample (7.88 mv/mm) of ZnO/Si. We attribute this phenomenon to the strong localized surface plasmon resonances (LSPRs) induced by nano Ag semicontinuous films. Quite different from the traditional LPE in PN junction type structures, in which light-generated carriers contributed to LPE merely depends on direct excitation of light in semiconductor, this work firstly demonstrates that, by introducing a super thin metal Ag in the interface between two different kinds of semiconductors, the nanoscale Ag embedded in the interface will produce strong resonance of localized field, causing extra intraband excitation, interband excitation and an enhanced direct excitation. As a consequence, these LSPRs dominated contributions harvest much more carriers, giving rise to a greatly enhanced LPE. In particular, this LSPRs-driven mechanism constitutes a sharp contrast to the traditional LPE operation mechanism. This work suggests a brand new LSPRs approach for tailoring LPE-based devices and also opens avenues of research within current photoelectric sensors area. PMID:26965713

The environmental heat flux routine, version 4 (EHFR-4) and Multiple Reflections Routine (MRR), volume 1

NASA Technical Reports Server (NTRS)

Dietz, J. B.

1973-01-01

The environmental heat flux routine version 4, (EHFR-4) is a generalized computer program which calculates the steady state and/or transient thermal environments experienced by a space system during lunar surface, deep space, or thermal vacuum chamber operation. The specific environments possible for EHFR analysis include: lunar plain, lunar crater, combined lunar plain and crater, lunar plain in the region of spacecraft surfaces, intervehicular, deep space in the region of spacecraft surfaces, and thermal vacuum chamber generation. The EHFR was used for Extra Vehicular Mobility Unit environment analysis of the Apollo 11-17 missions, EMU manned and unmanned thermal vacuum qualification testing, and EMU-LRV interface environmental analyses.

Enhanced visible light-induced photocatalytic activity of surface-modified BiOBr with Pd nanoparticles

NASA Astrophysics Data System (ADS)

Meng, Xiangchao; Li, Zizhen; Chen, Jie; Xie, Hongwei; Zhang, Zisheng

2018-03-01

Palladium nanoparticles well-dispersed on BiOBr surfaces were successfully prepared via a two-step process, namely hydrothermal synthesis of BiOBr followed by photodeposition of palladium. Surface-exposed palladium nanoparticles may improve the harvesting capacity of visible light photons via the surface plasmonic resonance effect to produce extra electrons. Palladium is an excellent electron acceptor, and therefore favours the separation of photogenerated electron/hole pairs. As a result, palladium significantly improves the photocatalytic activity of BiOBr in the removal of organic pollutants (phenol) under visible light irradiation. In addition to as-prepared samples which were comprehensively characterized, the mechanism for the enhancement via the deposition of palladium nanoparticles was also proposed based on results. This work may serve as solid evidence to confirm that surface-deposited palladium nanoparticles are capable of improving photocatalytic activity, and that photodeposition may be an effective approach to load metal nanoparticles onto a surface.

Extra Pay for Extra Duties, 1967-1968.

ERIC Educational Resources Information Center

National Education Association, Washington, DC. Research Div.

The practice of adding supplements to teachers' salaries for the guidance of pupil-participating extracurricular activities is widely used. To meet the demand for information on "extra pay for extra duties," a comprehensive study was made, including extra pay for extra duties of both athletic and nonathletic activities. Included are only those…

Atomic and electronic structures of Si(1 1 1)-(√3 x √3)R30°-Au and (6 × 6)-Au surfaces.

PubMed

Patterson, C H

2015-12-02

Si(1 1 1)-Au surfaces with around one monolayer of Au exhibit many ordered structures and structures containing disordered domain walls. Hybrid density functional theory (DFT) calculations presented here reveal the origin of these complex structures and tendency to form domain walls. The conjugate honeycomb chain trimer (CHCT) structure of the [Formula: see text]-Au phase contains Si atoms with non-bonding surface states which can bind Au atoms in pairs in interstices of the CHCT structure and make this surface metallic. Si adatoms adsorbed on the [Formula: see text]-Au surface induce a gapped surface through interaction with the non-bonding states. Adsorption of extra Au atoms in interstitial sites of the [Formula: see text]-Au surface is stabilized by interaction with the non-bonding orbitals and leads to higher coverage ordered structures including the [Formula: see text]-Au phase. Extra Au atoms bound in interstitial sites of the [Formula: see text]-Au surface result in top layer Si atoms with an SiAu4 butterfly wing configuration. The structure of a [Formula: see text]-Au phase, whose in-plane top atomic layer positions were previously determined by an electron holography technique (Grozea et al 1998 Surf. Sci. 418 32), is calculated using total energy minimization. The Patterson function for this structure is calculated and is in good agreement with data from an in-plane x-ray diffraction study (Dornisch et al 1991 Phys. Rev. B 44 11221). Filled and empty state scanning tunneling microscopy (STM) images are calculated for domain walls and the [Formula: see text]-Au structure. The [Formula: see text]-Au phase is 2D chiral and this is evident in computed and actual STM images. [Formula: see text]-Au and domain wall structures contain the SiAu4 motif with a butterfly wing shape. Chemical bonding within the Si-Au top layers of the [Formula: see text]-Au and [Formula: see text]-Au surfaces is analyzed and an explanation for the SiAu4 motif structure is given.

Worthy test programmes and developments of smart electromechanical actuators

NASA Astrophysics Data System (ADS)

Annaz, Fawaz Yahya

2007-02-01

Early aircraft flight control systems were totally manually operated, that is, the force required to move flight control surfaces was generated by the pilot and transmitted by cables and rods. As aerodynamics and airframe technology developed and speeds increased, the forces required to move control surfaces increased, as did the number of surfaces. In order to provide the extra power required, hydraulic technology was introduced. To date, the common element in the development of flight control systems has been, mainly, restricted to this type of technology. This is because of its proven reliability and the lack of alternative technologies. However, the technology to build electromechanically actuated primary flight control systems is now available. Motors developing the required power at the required frequencies are now possible (with the use of high energy permanent magnetic materials and compact high speed electronic circuits). It is this particular development which may make the concept of an 'all electric aircraft' realizable in the near future. The purpose of the all electric aircraft concept is the consolidation of all secondary power systems into electric power. The elimination of hydraulic and pneumatic secondary power systems will improve maintainability, flight readiness and use of energy. This paper will present the development of multi-lane smart electric actuators and offer an insight into other subsequent fields of study. The key areas of study may be categorized as follows. State of the art hydraulic actuators. Electromechanical actuator system test programmes. Development of electromechanical actuators. Modelling of electromechanical actuators.

Augmenting the osseointegration of endoprostheses using laser-sintered porous collars: an in vivo study.

PubMed

Mumith, A; Coathup, M; Chimutengwende-Gordon, M; Aston, W; Briggs, T; Blunn, G

2017-02-01

Massive endoprostheses rely on extra-cortical bone bridging (ECBB) to enhance fixation. The aim of this study was to investigate the role of selective laser sintered (SLS) porous collars in augmenting the osseointegration of these prostheses. The two novel designs of porous SLS collars, one with small pores (Ø700 μm, SP) and one with large pores (Ø1500 μm, LP), were compared in an ovine tibial diaphyseal model. Osseointegration of these collars was compared with that of a clinically used solid, grooved design (G). At six months post-operatively, the ovine tibias were retrieved and underwent radiological and histological analysis. Porous collars provided a significantly greater surface (p < 0.001) for the ingrowth of bone than the standard grooved design. Significantly greater extracortical pedicle formation was seen radiologically around the grooved design (length p = 0.002, thickness p < 0.001, surface area p = 0.002) than around the porous collars. However, the ingrowth of bone occurred from the transection site into the porous structure of both types of collar. A fivefold increase in integration was seen with the SP and a threefold increase in the LP design when compared with G (p < 0.001). SLS porous collars allow the direct ingrowth of more bone and are better than current designs which rely on surface ongrowth and ECBB. Cite this article: Bone Joint J 2017;99-B:276-82. ©2017 The British Editorial Society of Bone & Joint Surgery.

Tire-to-Surface Friction Especially Under Wet Conditions

NASA Technical Reports Server (NTRS)

Sawyer, Richard H.; Batterson, Sidney A.; Harrin, Eziaslav N.

1959-01-01

The results of measurements of the maximum friction available in braking on various runway surfaces under various conditions is shown for a C-123B airplane and comparisons of measurements with a tire-friction cart on the same runways are made. The.results of studies of wet-surface friction made with a 12-inch-diameter low-pressure tire on a tire-friction treadmill, with an automobile tire on the tire-friction cart, and with a 44 x 13 extra-high-pressure type VII aircraft tire at the Langley landing-loads track are compared. Preliminary results of tests on the tire-friction treadmill under wet-surface conditions to determine the effect of the wiping action of the front wheel of a tandem-wheel arrangement on the friction available in braking for the rear wheel are given.

Workers' Extra-Nest Behavioral Changes During Colony Fission in Dinoponera quadriceps (Santschi).

PubMed

Medeiros, J; Araújo, A

2014-04-01

Ant colonies can reproduce by two strategies: independent foundation, wherein the queen starts a new colony alone, and dependent foundation, in which workers assist the queen. In the queenless species Dinoponera quadriceps (Santschi), the colony reproduces obligatorily by fission, a type of dependent foundation, but this process is not well understood. This study describes a colony fission event of D. quadriceps in the field and analyzes the influence of the fission process on workers' extra-nest behavior. Based on observations of workers outside the nest, five distinct stages were identified: monodomic stage, polydomic stage, split stage, conflict stage, and post-conflict stage. The colony was initially monodomic and then occupied a second nest before it split into two independent colonies, indicating a gradual and opportunistic dependent foundation. After the fission event, the daughter colony had aggressive conflicts with the parental colony, resulting in the latter's disappearance. Colony fission affected workers' extra-nest behavior by increasing the frequency of rubbing the gaster against the substrate (which probably has a chemical marking function) and by decreasing the frequency of foraging during the split stage. After the fission event, the number of foragers was halved and foragers remained nearer to the nest during extra-nest activity. The spatial closeness of the parental and daughter colonies led to competition that caused the extinction or migration of the parental colony. Intraspecific competition was indicated by foraging directionality at the colony level, whereby areas of neighbor colonies were avoided; this directionality was stronger while both colonies coexisted.

9 CFR 91.28 - Stanchions and rails.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., galvanized, extra strong, medium carbon steel. Steel pipes or other steel profiles shall consist of not less... work. Pins, plates, and parts other than pipe shall be made of galvanized steel. All areas where galvanizing of the steel has eroded or has been damaged shall be finished with a rust preventative. (5) Pipe...

9 CFR 91.28 - Stanchions and rails.

Code of Federal Regulations, 2013 CFR

2013-01-01

..., galvanized, extra strong, medium carbon steel. Steel pipes or other steel profiles shall consist of not less... work. Pins, plates, and parts other than pipe shall be made of galvanized steel. All areas where galvanizing of the steel has eroded or has been damaged shall be finished with a rust preventative. (5) Pipe...

9 CFR 91.28 - Stanchions and rails.

Code of Federal Regulations, 2014 CFR

2014-01-01

..., galvanized, extra strong, medium carbon steel. Steel pipes or other steel profiles shall consist of not less... work. Pins, plates, and parts other than pipe shall be made of galvanized steel. All areas where galvanizing of the steel has eroded or has been damaged shall be finished with a rust preventative. (5) Pipe...

9 CFR 91.28 - Stanchions and rails.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., galvanized, extra strong, medium carbon steel. Steel pipes or other steel profiles shall consist of not less... work. Pins, plates, and parts other than pipe shall be made of galvanized steel. All areas where galvanizing of the steel has eroded or has been damaged shall be finished with a rust preventative. (5) Pipe...

9 CFR 91.28 - Stanchions and rails.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., galvanized, extra strong, medium carbon steel. Steel pipes or other steel profiles shall consist of not less... work. Pins, plates, and parts other than pipe shall be made of galvanized steel. All areas where galvanizing of the steel has eroded or has been damaged shall be finished with a rust preventative. (5) Pipe...

ECOLOGICAL AND ECONOMIC DYNAMICS OF THE SHUNDE AGRICULTURAL SYSTEM UNDER CHINA'S SMALL CITY DEVELOPMENT STRATEGY

EPA Science Inventory

The development of small cities has been adopted as the main strategy to make full use of extra labor in the rural areas of China. The ecological and economic consequences of this development will affect over 100 million people and change the organization of agricultural systems ...

Guidelines for Parent Involvement in Chapter 1 Programs.

ERIC Educational Resources Information Center

Weckstein, Paul

Chapter 1 is the largest federal education program in existence. It provides extra services to help low-achieving students and is targeted primarily at areas where low-income families reside. Parent involvement in designing and implementing the program is an essential part of Chapter 1. However, the parent involvement component is often not as…

To Clone or Not to Clone?

ERIC Educational Resources Information Center

Beninghof, Anne M.

2016-01-01

Beninghof challenges a common misconception--that in a good co-teaching classroom, no one should be able to tell which one is the special education teacher and which is the regular classroom teacher. Co-teaching is a partnership of two teachers with different areas of expertise. Instead of just lending an extra pair of helping hands, the…

117. Photocopied August 1978. VIEW OF EAST FOREBAY SHOWING COMPLETED ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

117. Photocopied August 1978. VIEW OF EAST FOREBAY SHOWING COMPLETED APRON. NOVEMBER 24, 1926. CLAY LEFT OVER FROM REFILLING THE AREA BETWEEN FOREBAY FLOOR SILLS IS SHOWN HEAPED AGAINST THE FOREBAY WALL TO PROVIDE AN EXTRA MEASURE OF PROTECTION. (1051) - Michigan Lake Superior Power Company, Portage Street, Sault Ste. Marie, Chippewa County, MI

Sharing Expertise: Consulting

ERIC Educational Resources Information Center

Graves, Bill

2011-01-01

A special breed of superintendents who have developed expertise in a particular area find ways of sharing it in other venues as outside consultants. They pull extra duty to put their special skills into practice, to give back to their communities, to stay current and grounded in the field, or to enhance their professional reputations. They teach…

Fringe Capacitance Correction for a Coaxial Soil Cell

PubMed Central

Pelletier, Mathew G.; Viera, Joseph A.; Schwartz, Robert C.; Lascano, Robert J.; Evett, Steven R.; Green, Tim R.; Wanjura, John D.; Holt, Greg A.

2011-01-01

Accurate measurement of moisture content is a prime requirement in hydrological, geophysical and biogeochemical research as well as for material characterization and process control. Within these areas, accurate measurements of the surface area and bound water content is becoming increasingly important for providing answers to many fundamental questions ranging from characterization of cotton fiber maturity, to accurate characterization of soil water content in soil water conservation research to bio-plant water utilization to chemical reactions and diffusions of ionic species across membranes in cells as well as in the dense suspensions that occur in surface films. One promising technique to address the increasing demands for higher accuracy water content measurements is utilization of electrical permittivity characterization of materials. This technique has enjoyed a strong following in the soil-science and geological community through measurements of apparent permittivity via time-domain-reflectometry (TDR) as well in many process control applications. Recent research however, is indicating a need to increase the accuracy beyond that available from traditional TDR. The most logical pathway then becomes a transition from TDR based measurements to network analyzer measurements of absolute permittivity that will remove the adverse effects that high surface area soils and conductivity impart onto the measurements of apparent permittivity in traditional TDR applications. This research examines an observed experimental error for the coaxial probe, from which the modern TDR probe originated, which is hypothesized to be due to fringe capacitance. The research provides an experimental and theoretical basis for the cause of the error and provides a technique by which to correct the system to remove this source of error. To test this theory, a Poisson model of a coaxial cell was formulated to calculate the effective theoretical extra length caused by the fringe capacitance which is then used to correct the experimental results such that experimental measurements utilizing differing coaxial cell diameters and probe lengths, upon correction with the Poisson model derived correction factor, all produce the same results thereby lending support and for an augmented measurement technique for measurement of absolute permittivity. PMID:22346601

Characterisation of PDO olive oil Chianti Classico by non-selective (UV-visible, NIR and MIR spectroscopy) and selective (fatty acid composition) analytical techniques.

PubMed

Casale, M; Oliveri, P; Casolino, C; Sinelli, N; Zunin, P; Armanino, C; Forina, M; Lanteri, S

2012-01-27

An authentication study of the Italian PDO (protected designation of origin) extra virgin olive oil Chianti Classico was performed; UV-visible (UV-vis), Near-Infrared (NIR) and Mid-Infrared (MIR) spectroscopies were applied to a set of samples representative of the whole Chianti Classico production area. The non-selective signals (fingerprints) provided by the three spectroscopic techniques were utilised both individually and jointly, after fusion of the respective profile vectors, in order to build a model for the Chianti Classico PDO olive oil. Moreover, these results were compared with those obtained by the gas chromatographic determination of the fatty acids composition. In order to characterise the olive oils produced in the Chianti Classico PDO area, UNEQ (unequal class models) and SIMCA (soft independent modelling of class analogy) were employed both on the MIR, NIR and UV-vis spectra, individually and jointly, and on the fatty acid composition. Finally, PLS (partial least square) regression was applied on the UV-vis, NIR and MIR spectra, in order to predict the content of oleic and linoleic acids in the extra virgin olive oils. UNEQ, SIMCA and PLS were performed after selection of the relevant predictors, in order to increase the efficiency of both classification and regression models. The non-selective information obtained from UV-vis, NIR and MIR spectroscopy allowed to build reliable models for checking the authenticity of the Italian PDO extra virgin olive oil Chianti Classico. Copyright © 2011 Elsevier B.V. All rights reserved.

Quality of extra virgin olive oils produced in an emerging olive growing area in north-western Spain.

PubMed

Reboredo-Rodríguez, P; González-Barreiro, C; Cancho-Grande, B; Simal-Gándara, J

2014-12-01

Systematic studies of physico-chemical and stability-related properties, and chemical composition, of extra virgin olive oils (EVOOs) obtained from drupes cropped in specific regions are of special agricultural interest. This is particularly so with new production areas, where careful selection of the most suitable olive varieties for EVOO production is required. This paper reports the first comprehensive chemical characterisation of EVOOs obtained from three different olive varieties (viz., Picual, Morisca and Manzanilla de Sevilla) grown in a new cultivation area in Galicia (NW Spain). The Morisca variety was that providing the highest industrial oil yield (21%). However, the three types of EVOO exhibited no statistically significant differences in standard quality-related indices other than acidity. Morisca EVOO was that with the lowest content in oleic acid (mean=68%) and highest content in linoleic acid (mean=13%). Also, Morisca EVOO exhibited the highest sterol levels (mean=1,616 mg/kg) and Picual EVOO the lowest (mean=1,160 mg/kg). Picual EVOO contained greater amounts of the phenolic compounds luteolin and pinoresinol than both Morisca and Manzanilla de Sevilla EVOOs. Finally, Manzanilla de Sevilla EVOO exhibited differential attributes, with banana and olive fruit aromatic series prevailing predominantly over bitter-like, pungent-like and leaf series. Copyright © 2014 Elsevier Ltd. All rights reserved.

An isoline separating relatively warm from relatively cool wintertime forest surface temperatures for the southeastern United States

Treesearch

J. Wickham; T.G. Wade; K.H. Riitters

2014-01-01

Forest-oriented climate mitigation policies promote forestation as a means to increase uptake of atmospheric carbon to counteract global warming. Some have pointed out that a carbon-centric forest policy may be overstated because it discounts biophysical aspects of the influence of forests on climate. In extra-tropical regions, many climate models have shown that...

Model simulations of the adsorption of statherin to solid surfaces: Effects of surface charge and hydrophobicity

NASA Astrophysics Data System (ADS)

Skepö, M.

2008-11-01

The structural properties of the salivary protein statherin upon adsorption have been examined using a coarse-grained model and Monte Carlo simulation. A simple model system with focus on electrostatic interactions and short-ranged attractions among the uncharged amino acids has been used. To mimic hydrophobically modified surfaces, an extra short-ranged interaction was implemented between the amino acids and the surface. It has been shown that the adsorption and the thickness of the adsorbed layer are determined by (i) the affinity for the surface, i.e., denser layer with an extrashort-ranged potential, and (ii) the distribution of the charges along the chain. If all the amino acids have a high affinity for the surface, the protein adsorbs in a train conformation, if the surface is negatively charged the protein adsorbs in a tail-train conformation, whereas if the surface is positively charged the protein adsorbs in a loop conformation. The latter gives rise to a more confined adsorbed layer.

Development of Maximum Bubble Pressure Method for Surface Tension Measurement of High Viscosity Molten Silicate

NASA Astrophysics Data System (ADS)

Takeda, Osamu; Iwamoto, Hirone; Sakashita, Ryota; Iseki, Chiaki; Zhu, Hongmin

2017-07-01

A surface tension measurement method based on the maximum bubble pressure (MBP) method was developed in order to precisely determine the surface tension of molten silicates in this study. Specifically, the influence of viscosity on surface tension measurements was quantified, and the criteria for accurate measurement were investigated. It was found that the MBP apparently increased with an increase in viscosity. This was because extra pressure was required for the flowing liquid inside the capillary due to viscous resistance. It was also expected that the extra pressure would decrease by decreasing the fluid velocity. For silicone oil with a viscosity of 1000 \\hbox {mPa}{\\cdot }\\hbox {s}, the error on the MBP could be decreased to +1.7 % by increasing the bubble detachment time to 300 \\hbox {s}. However, the error was still over 1 % even when the bubble detachment time was increased to 600 \\hbox {s}. Therefore, a true value of the MBP was determined by using a curve-fitting technique with a simple relaxation function, and that was succeeded for silicone oil at 1000 \\hbox {mPa}{\\cdot } \\hbox {s} of viscosity. Furthermore, for silicone oil with a viscosity as high as 10 000 \\hbox {mPa}{\\cdot }\\hbox {s}, the apparent MBP approached a true value by interrupting the gas introduction during the pressure rising period and by re-introducing the gas at a slow flow rate. Based on the fundamental investigation at room temperature, the surface tension of the \\hbox {SiO}2-40 \\hbox {mol}%\\hbox {Na}2\\hbox {O} and \\hbox {SiO}2-50 \\hbox {mol}%\\hbox {Na}2\\hbox {O} melts was determined at a high temperature. The obtained value was slightly lower than the literature values, which might be due to the influence of viscosity on surface tension measurements being removed in this study.

Extra-large negative pressure wound therapy dressings for burns - Initial experience with technique, fluid management, and outcomes.

PubMed

Fischer, Sebastian; Wall, Jennifer; Pomahac, Bohdan; Riviello, Robert; Halvorson, Eric G

2016-03-01

The use of negative-pressure-wound-therapy (NPWT) is associated with improved outcomes in smaller burns. We report our experience using extra-large (XL) NPWT dressings to treat ≥15% total body surface area (TBSA) burned and describe our technique and early outcomes. We also provide NPWT exudate volume for predictive fluid resuscitation in these critically ill patients. We retrospectively reviewed patients treated with XL-NPWT from 2012 to 2014. Following excision/grafting, graft and donor sites were sealed with a layered NPWT dressing. We documented wound size, dressing size, NPWT outputs, graft take, wound infections, and length of stay (LOS). Mean NPWT exudate volume per %TBSA per day was calculated. Twelve burn patients (mean TBSA burned 30%, range 15-60%) were treated with XL-NPWT (dressing TBSA burned and skin graft donor sites range 17-44%). Average graft take was 97%. No wound infections occurred. Two patients had burns ≥50% TBSA and their LOS was reduced compared to ABA averages. XL-NPWT outputs peaked at day 1 after grafting followed by a steady decline until dressings were removed. Average XL-NPWT dressing output during the first 5 days was 101±66mL/%BSA covered per day. 2 patients developed acute kidney injury. The use of XL-NPWT to treat extensive burns is feasible with attention to application technique. NPWT dressings appear to improve graft take, and to decrease risk of infection, LOS, and pain and anxiety associated with wound care. Measured fluid losses can improve patient care in future applications of NPWT to large burn wounds. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Thermal effects of dorsal head immersion in cold water on nonshivering humans.

PubMed

Giesbrecht, Gordon G; Lockhart, Tamara L; Bristow, Gerald K; Steinman, Allan M

2005-11-01

Personal floatation devices maintain either a semirecumbent flotation posture with the head and upper chest out of the water or a horizontal flotation posture with the dorsal head and whole body immersed. The contribution of dorsal head and upper chest immersion to core cooling in cold water was isolated when the confounding effect of shivering heat production was inhibited with meperidine (Demerol, 2.5 mg/kg). Six male volunteers were immersed four times for up to 60 min, or until esophageal temperature = 34 degrees C. An insulated hoodless dry suit or two different personal floatation devices were used to create four conditions: 1) body insulated, head out; 2) body insulated, dorsal head immersed; 3) body exposed, head (and upper chest) out; and 4) body exposed, dorsal head (and upper chest) immersed. When the body was insulated, dorsal head immersion did not affect core cooling rate (1.1 degrees C/h) compared with head-out conditions (0.7 degrees C/h). When the body was exposed, however, the rate of core cooling increased by 40% from 3.6 degrees C/h with the head out to 5.0 degrees C/h with the dorsal head and upper chest immersed (P < 0.01). Heat loss from the dorsal head and upper chest was approximately proportional to the extra surface area that was immersed (approximately 10%). The exaggerated core cooling during dorsal head immersion (40% increase) may result from the extra heat loss affecting a smaller thermal core due to intense thermal stimulation of the body and head and resultant peripheral vasoconstriction. Dorsal head and upper chest immersion in cold water increases the rate of core cooling and decreases potential survival time.

Artist: Rick Guidice Space Colonization - Bernal Sphere - The residential area is in the central

NASA Technical Reports Server (NTRS)

1976-01-01

Artist: Rick Guidice Space Colonization - Bernal Sphere - The residential area is in the central sphere. Farming regions are in the 'tires.' Mirrors reflect sunlight into the habitat and farms. The large flat panels radiate away extra heat into space, and panels of solar cells provide electricity. Factories and docks for spaceships are at either end of the long central tube. (NOTE: art printed in Book 'Space Colony - Frontier of the 21st Century by Franklyn M. Branley)

[Delayed diagnosis of neurocysticercosis: two case reports].

PubMed

Vandenbos, F; Boscagli-Melaine, A; Roth, S; Mondain-Miton, V; Paquis, P; Gari-Toussaint, M; Saint-Paul, M C; Montagne, N

2002-04-01

Neurocysticercosis is the most frequently encountered cerebral parasitic infection worldwide. It is due to infection of the central nervous system by Taenia solium larval form. According to the location of the cysts, parenchymal and extra-parenchymal forms may be identified, with different clinical expressions. We report two cases of neurocysticercosis, one with typical parenchymal involvement and the second with extra-parenchymal involvement revealed by increased intra-cranial pressure. In both cases, the diagnosis was established over 10 years after the onset of symptoms. Neurocysticercosis is very frequent in non-Islamic developing countries, and its incidence is increasing in industrialized nations in relation to tourism and immigration from highly endemic areas. Symptoms usually appear several years after infection and this accounts for the frequent delays before the diagnosis is established.

Prostaglandin E2 Prevents Bone Loss and Adds Extra Bone to Immobilized Distal Femoral Metaphysis in Female Rats

NASA Technical Reports Server (NTRS)

Akamine, T.; Jee, W. S. S.; Ke, H. Z.; Li, X. J.; Lin, B. Y.

1992-01-01

The object of this study was to determine whether prostaglandin E2 (PGE2) can prevent disuse (underloading)-induced cancellous bone loss. Thirteen-month-old retired female Sprague-Dawley breeders served as controls or were subjected to right hindlimb immobilization by bandaging and simultaneously treated subcutaneously daily with 0, 1, 3, or 6 mg PGE2/kg/d for two and six weeks. Histomorphometric analyses were performed on the cancellous bone using double-fluorescent labeled, 20 micron thick, undecalcified distal femoral metaphysis sections. We found that PGE2 administration not only prevented disuse-induced bone loss, but also added extra bone to disuse cancellous bone in a dose-response manner. PGE2 prevented the disuse-induced osteopenia by stimulating more bone formation than and shortening the period of bone remodeling. It activated woven bone formation, stimulated lamellar bone formation, and increased the eroded bone surface above that caused by disuse alone. While underloading increased the remodeling period (sigma), PGE2 treatment of underloaded bone shortened the time for osteoclastic bone resorption and bone remodeling, and thus reduced the remodeling space. The study shows that PGE2 is a powerful anabolic agent that prevents disuse-induced osteopenia and adds extra bone to these same bones.

Emergence and expansion of cosmic space as due to M0-branes

NASA Astrophysics Data System (ADS)

Sepehri, Alireza; Setare, Mohammad Reza; Capozziello, Salvatore

2015-12-01

Recently, Padmanabhan (arXiv:1206.4916 [hep-th]) discussed that the difference between the number of degrees of freedom on the boundary surface and the number of degrees of freedom in a bulk region causes the accelerated expansion of the universe. The main question arising is: what is the origin of this inequality between the surface degrees of freedom and the bulk degrees of freedom? We answer this question in M-theory. In our model, first M0-branes are compactified on one circle and N D0-branes are created. Then N D0-branes join each other, grow, and form one D5-branes. Next, the D5-brane is compactified on two circles and our universe's D3-brane, two D1-branes and some extra energies are produced. After that, one of the D1-branes, which is closer to the universe's brane, gives its energy into it, and this leads to an increase in the difference between the numbers of degrees of freedom and the occurring inflation era. With the disappearance of this D1-brane, the number of degrees of freedom of boundary surface and bulk region become equal and inflation ends. At this stage, extra energies that are produced due to the compactification cause an expansion of the universe and deceleration epoch. Finally, another D1-brane dissolves in our universe's brane, leads to an inequality between degrees of freedom, and there occurs a new phase of acceleration.

The amblyopic deficit for 2nd order processing: Generality and laterality.

PubMed

Gao, Yi; Reynaud, Alexandre; Tang, Yong; Feng, Lixia; Zhou, Yifeng; Hess, Robert F

2015-09-01

A number of previous reports have suggested that the processing of second-order stimuli by the amblyopic eye (AE) is defective and that the fellow non-amblyopic eye (NAE) also exhibits an anomaly. Second-order stimuli involve extra-striate as well as striate processing and provide a means of exploring the extent of the cortical anomaly in amblyopia using psychophysics. We use a range of different second-order stimuli to investigate how general the deficit is for detecting second-order stimuli in adult amblyopes. We compare these results to our previously published adult normative database using the same stimuli and approach to determine the extent to which the detection of these stimuli is defective for both amblyopic and non-amblyopic eye stimulation. The results suggest that the second-order deficit affects a wide range of second-order stimuli, and by implication a large area of extra-striate cortex, both dorsally and ventrally. The NAE is affected only in motion-defined form judgments, suggesting a difference in the degree to which ocular dominance is disrupted in dorsal and ventral extra-striate regions. Copyright © 2014 Elsevier Ltd. All rights reserved.

Amphetamine treatment affects the extra-hypothalamic vasopressinergic system in a sex- and nucleus-dependent manner.

PubMed

Ahumada, C; Bahamondes, C; Cerda, C A; Silva, R A; Cruz, G; Moya, P R; Sotomayor-Zárate, R; Renard, G M

2017-04-01

The lateral septum (LS), a brain structure implicated in addictive behaviours, regulates the activation of dopaminergic neurones in the ventral tegmental area. Vasopressinergic projections from the extended amygdala to the LS, which are sexually dimorphic, could be responsible for the vulnerability to addiction in a sex-dependent manner. The present study aimed to investigate the modulatory effects of amphetamine (AMPH) on the expression of vasopressin (AVP) in the vasopressinergic extra-hypothalamic system in sensitised male and female rats. Adult male and female Sprague-Dawley rats underwent an AMPH-locomotor sensitisation protocol. Acute AMPH increased AVP mRNA expression in the medial amygdala (MeA), whereas AMPH-induced sensitisation increased AVP mRNA expression in the bed nucleus of the stria terminalis (BNST) only in females. Interestingly, the increase in AVP expression in BNST was higher in oestrus females compared to dioestrus females and acute AMPH resulted in a decrease in AVP levels in the LS, only in males. Thus, there are complex and region-specific interactions between AMPH and the extra-hypothalamic vasopressinergic system in the brain, underlying possible alterations in different behaviours caused by acute and chronic AMPH exposure. © 2017 British Society for Neuroendocrinology.

Artificial upwelling using the energy of surface waves

NASA Astrophysics Data System (ADS)

Soloviev, A.

2016-02-01

The ocean is an important component of climate and climate change, since the heat capacity of a few meters of the upper ocean is equivalent to the heat capacity of the entire atmosphere. (Solar radiation and IR balance in the atmosphere are of course major factors as well.) Artificial upwelling devices using the energy of surface waves, similar to those developed by Vershinskiy, Pshenichnyy, and Soloviev (1987), can bring cold water from below the thermocline to the sea surface. Their wave-inertia pump consisted of a vertical tube, a valve, and a buoy to keep the device afloat. The device operated by using energy of surface waves to create an upward flow of water in the tube. An outlet valve at the top of the unit synchronized the operation of the device with surface waves and prevented back-splashing. A single device with a 100 m long and 1.2 m diameter tube is able to produce up to 1 m3s-1 flow of deep water to the surface. With a 10oC temperature difference over 100 m depth, the negative heat supply rate to the sea surface is 42 MW, which is equivalent to a 42 Wm-2 heat flux, if distributed over 1 km2 area. Such flux is comparable to the average net air-sea flux. This type of artificial upwelling can cool down the sea surface, modify climate on a regional scale and possibly help mitigate hurricanes. The cold water brought from the deep layer, however, has a larger density than the surface water and therefore has a tendency to sink back down. In this work, the efficiency of wave-inertia pumps has been estimated for different environmental conditions using a computational fluid dynamics model. The cooled near-surface layer of the ocean will be getting more heat from the sun, which is a detrimental consequence. Cloud seeding can help to mitigate this extra warming. A synergistic approach to climate engineering can thus reduce detriments and increase potential benefits of this system to society.

The interdecadal worsening of weather conditions affecting aerosol pollution in the Beijing area in relation to climate warming

NASA Astrophysics Data System (ADS)

Zhang, Xiaoye; Zhong, Junting; Wang, Jizhi; Wang, Yaqiang; Liu, Yanju

2018-04-01

The weather conditions affecting aerosol pollution in Beijing and its vicinity (BIV) in wintertime have worsened in recent years, particularly after 2010. The relation between interdecadal changes in weather conditions and climate warming is uncertain. Here, we analyze long-term variations of an integrated pollution-linked meteorological index (which is approximately and linearly related to aerosol pollution), the extent of changes in vertical temperature differences in the boundary layer (BL) in BIV, and northerly surface winds from Lake Baikal during wintertime to evaluate the potential contribution of climate warming to changes in meteorological conditions directly related to aerosol pollution in this area; this is accomplished using NCEP reanalysis data, surface observations, and long-term vertical balloon sounding observations since 1960. The weather conditions affecting BIV aerosol pollution are found to have worsened since the 1960s as a whole. This worsening is more significant after 2010, with PM2.5 reaching unprecedented high levels in many cities in China, particularly in BIV. The decadal worsening of meteorological conditions in BIV can partly be attributed to climate warming, which is defined by more warming in the higher layers of the boundary layer (BL) than the lower layers. This worsening can also be influenced by the accumulation of aerosol pollution, to a certain extent (particularly after 2010), because the increase in aerosol pollution from the ground leads to surface cooling by aerosol-radiation interactions, which facilitates temperature inversions, increases moisture accumulations, and results in the extra deterioration of meteorological conditions. If analyzed as a linear trend, weather conditions have worsened by ˜ 4 % each year from 2010 to 2017. Given such a deterioration rate, the worsening of weather conditions may lead to a corresponding amplitude increase in PM2.5 in BIV during wintertime in the next 5 years (i.e., 2018 to 2022). More stringent emission reduction measures will need to be conducted by the government.

Latent/sensible heat and water stress retrieval performances of the SPARSE dual-source energy balance model over irrigated and rainfed agricultural crops using eddy covariance, sap flow and extra-large aperture scintillometer data

NASA Astrophysics Data System (ADS)

Boulet, G.; Bahir, M.; Delogu, E.; Mougenot, B.; Bousbih, S.; Raimbault, B.; Fanise, P.; Saadi, S.; Chebbi, W.; Lili-Chabaane, Z.; Rivalland, V.; Lagouarde, J. P.; Olioso, A.

2016-12-01

The ability to monitor latent heat flux (LE) is relevant for applications requiring spatially-resolved estimates of moisture availability over large areas. Recently, a number of studies have focused on estimating surface energy fluxes via assimilation of land surface temperature (LST) observations into variational data assimilation (VDA) schemes. In this study, the performance of the combined-source variational data assimilation (CS-VDA) framework is assessed in detail using surface multitemporal heat fluxes collected at a Eucalypt forest savanna of Northern Australia. The CS VDA model treats the soil and vegetation as one medium. We extended previous studies, to a semi-arid ecosystem and included 1 and 3 hour global meteorological forcing data (GMD) rather than site-specific observations to drive CS VDA model. To implement the VDA model we relied on hourly water fluxes and meteorological measurements from an eddy covariance (EC) site located at our Australian study site. Using 1 and 3-hour average in-situ measurements, the mean difference between estimated and observed LE was ˜30%, which agreed with errors reported in the literature. We found that at least an 3 hour average meteorological data was required as input to the CS-VDA model, so 1-3-hourly temporal resolution MERRA-GMA and GLDAS, respectively, were used. We found that replacing local meteorological data with GMD reduced the performance of the LE estimation in comparison to in-situ measurements (GLDAS: RMSEdaily=98.52 W/m2, GMA: RMSEdaily=82.02 W/m2). Despite this, the model LE RMSE values at 8-day temporal scale (GMA: RMSE8-days=32.20 W/m2) was similar of those reported at this area by others models. This study provides the basis to produce an operational daily LE product using GMD dataset and LST remote sensing data within the CS-VDA algorithm.

Femtosecond laser induced tunable surface transformations on (111) Si aided by square grids diffraction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Han, Weina; Jiang, Lan; Li, Xiaowei, E-mail: lixiaowei@bit.edu.cn

We report an extra freedom to modulate the femtosecond laser energy distribution to control the surface ablated structures through a copper-grid mask. Due to the reduced deposited pulse energy by changing the scanning speed or the pulse fluence, a sequential evolution of three distinctly different surface patterns with periodic distributions is formed, namely, striped ripple lines, ripple microdots, and surface modification. By changing the scanning speed, the number of the multiple dots in a lattice can be modulated. Moreover, by exploring the ablation process through the copper grid mask, it shows an abnormal enhanced ablation effect with strong dependence ofmore » the diffraction-aided fs laser ablated surface structures on polarization direction. The sensitivity shows a quasi-cosinusoid-function with a periodicity of π/2. Particularly, the connection process of striped ripple lines manifests a preferential formation direction with the laser polarization.« less

EXTraS: Exploring the X-ray Transient and variable Sky

NASA Astrophysics Data System (ADS)

De Luca, A.; Salvaterra, R.; Tiengo, A.; D'Agostino, D.; Watson, M.; Haberl, F.; Wilms, J.

2017-10-01

The EXTraS project extracted all temporal domain information buried in the whole database collected by the EPIC cameras onboard the XMM-Newton mission. This included a search and characterisation of variability, both periodic and aperiodic, in hundreds of thousands of sources spanning more than eight orders of magnitude in time scale and six orders of magnitude in flux, as well as a search for fast transients, missed by standard image analysis. Phenomenological classification of variable sources, based on X-ray and multiwavelength information, has also been performed. All results and products of EXTraS are made available to the scientific community through a web public data archive. A dedicated science gateway will allow scientists to apply EXTraS pipelines on new observations. EXTraS is the most comprehensive analysis of variability, on the largest ever sample of soft X-ray sources. The resulting archive and tools disclose an enormous scientific discovery space to the community, with applications ranging from the search for rare events to population studies, with impact on the study of virtually all astrophysical source classes. EXTraS, funded within the EU/FP7 framework, is carried out by a collaboration including INAF (Italy), IUSS (Italy), CNR/IMATI (Italy), University of Leicester (UK), MPE (Germany) and ECAP (Germany).

Survival of porcine reproductive and respiratory syndrome virus in houseflies

PubMed Central

Otake, Satoshi; Dee, Scott A.; Moon, Roger D.; Rossow, Kurt D.; Trincado, Carlos; Farnham, MacDonald; Pijoan, Carlos

2003-01-01

The objectives of the study were to determine the duration of porcine reproductive and respiratory syndrome virus (PRRSV) survival in houseflies (Musca domestica Linnaeus) following feeding on an infected pig, and to determine whether the virus was present on the exterior surface or within the internal viscera of the fly. A total of 210 laboratory-colonized houseflies were allowed to feed to repletion on a pig, experimentally infected with PRRSV on day 7 postinoculation, and then maintained alive under laboratory conditions (27°C). Two subsets (A and B) of 30 flies were collected at each of the following sampling points; 0, 6, and 12 hours post feeding (pf). Subset A contained an extra group of 30 flies collected at 24 hours pf due to the availability of extra flies. Flies in subset A were processed as whole fly homogenates, while the exterior surface washes and digestive organs were collected from flies in subset B. Whole fly homogenates, collected at 0, 6, and 12 hours pf, were positive by both polymerase chain reaction (PCR) and swine bioassay. Digestive organs, collected at 0 and 12 hours pf, were positive by PCR and swine bioassay. The PRRSV RNA was detected by PCR from the exterior surface wash of subset B flies collected at 0, 6, and 12 hours pf; however, only the subset collected at 0 hour pf was swine bioassay-positive. This study indicates that infectious PRRSV can survive within the intestinal tract of houseflies for up to 12 hours following feeding on an infected pig, but only for a short period on the exterior surface of the flies. PMID:12889726

Spatial and Temporal Inter-Relationship between Anomalies and Trends of Temperature, Moisture, Cloud Cover and OLR as Observed by AIRS/AMSU on Aqua

NASA Technical Reports Server (NTRS)

Susskind, Joel; Molnar, Gyula

2009-01-01

AIRS/AMSU is the advanced IR/MW atmospheric sounding system launched on EOS Aqua in May 2002. Products derived from AIRS/AMSU by the AIRS Science Team include surface skin temperature and atmospheric temperature profiled; atmospheric humidity profiles, fractional cloud clover and cloud top pressure, and OLR. Products covering the period September 2002 through the present have been derived from AIRS/AMSU using the AIRS Science Team Version 5 retrieval algorithm. In this paper, we will show results covering the time period September 2006 - November 2008. This time period is marked by a substantial warming trend of Northern Hemisphere Extra-tropical land surface skin temperatures, as well as pronounced El Nino - La Nina episodes. These both influence the spatial and temporal anomaly patterns of atmospheric temperature and moisture profiles, as well as of cloud cover and Clear Sky and All Sky OLR. The relationships between temporal and spatial anomalies of these parameters over this time period, as determined from AIRS/AMSU observations, will be shown with particular emphasis on which contribute significantly to OLR anomalies in each of the tropics and extra-tropics. Results will also be shown to evaluate the anomalies and trends of temperature profiles and OLR as determined from analysis of AIRS/AMSU data. Global and regional trends during the 6 1/3 year time period are not necessarily indicative of what has happened in the past, or what may happen in the future. Nevertheless, the inter-relationships of spatial and temporal anomalies of atmospheric geophysical parameters with those of surface skin temperature are indicative of climate processes, and can be used to test the performance of climate models when driven by changes in surface temperatures.

A continuous surface reconstruction method on point cloud captured from a 3D surface photogrammetry system.

PubMed

Liu, Wenyang; Cheung, Yam; Sabouri, Pouya; Arai, Tatsuya J; Sawant, Amit; Ruan, Dan

2015-11-01

To accurately and efficiently reconstruct a continuous surface from noisy point clouds captured by a surface photogrammetry system (VisionRT). The authors have developed a level-set based surface reconstruction method on point clouds captured by a surface photogrammetry system (VisionRT). The proposed method reconstructs an implicit and continuous representation of the underlying patient surface by optimizing a regularized fitting energy, offering extra robustness to noise and missing measurements. By contrast to explicit/discrete meshing-type schemes, their continuous representation is particularly advantageous for subsequent surface registration and motion tracking by eliminating the need for maintaining explicit point correspondences as in discrete models. The authors solve the proposed method with an efficient narrowband evolving scheme. The authors evaluated the proposed method on both phantom and human subject data with two sets of complementary experiments. In the first set of experiment, the authors generated a series of surfaces each with different black patches placed on one chest phantom. The resulting VisionRT measurements from the patched area had different degree of noise and missing levels, since VisionRT has difficulties in detecting dark surfaces. The authors applied the proposed method to point clouds acquired under these different configurations, and quantitatively evaluated reconstructed surfaces by comparing against a high-quality reference surface with respect to root mean squared error (RMSE). In the second set of experiment, the authors applied their method to 100 clinical point clouds acquired from one human subject. In the absence of ground-truth, the authors qualitatively validated reconstructed surfaces by comparing the local geometry, specifically mean curvature distributions, against that of the surface extracted from a high-quality CT obtained from the same patient. On phantom point clouds, their method achieved submillimeter reconstruction RMSE under different configurations, demonstrating quantitatively the faith of the proposed method in preserving local structural properties of the underlying surface in the presence of noise and missing measurements, and its robustness toward variations of such characteristics. On point clouds from the human subject, the proposed method successfully reconstructed all patient surfaces, filling regions where raw point coordinate readings were missing. Within two comparable regions of interest in the chest area, similar mean curvature distributions were acquired from both their reconstructed surface and CT surface, with mean and standard deviation of (μrecon=-2.7×10(-3) mm(-1), σrecon=7.0×10(-3) mm(-1)) and (μCT=-2.5×10(-3) mm(-1), σCT=5.3×10(-3) mm(-1)), respectively. The agreement of local geometry properties between the reconstructed surfaces and the CT surface demonstrated the ability of the proposed method in faithfully representing the underlying patient surface. The authors have integrated and developed an accurate level-set based continuous surface reconstruction method on point clouds acquired by a 3D surface photogrammetry system. The proposed method has generated a continuous representation of the underlying phantom and patient surfaces with good robustness against noise and missing measurements. It serves as an important first step for further development of motion tracking methods during radiotherapy.

Glossing for Improved Comprehension: Progress and Prospect.

ERIC Educational Resources Information Center

Otto, Wayne; Hayes, Bernie

The terms gloss and glossing are being used to designate and describe the systematic use of marginal notes and other extra-text notations to direct readers' attention while they read. Gloss notations may serve as an aid to direct students to content areas of text and to levels of understanding that make optimal use of their current--and sometimes…

Comparisons of Men and Women at the U.S. Naval Academy: Outcomes and Processes in Their Development.

ERIC Educational Resources Information Center

Harrison, Patrick R.; Leadbetter, Beth

The integration of women into the U.S. Naval Academy is analyzed. Areas of concern identified before the arrival of women in the class of 1980 were fraternization, acceptance, physical conditioning, berthing, leading and counseling females, publicity, athletic outlets, extra-curricular involvement, summer cruises, weight and diet requirements, and…

Humanities in the Elementary School: A Handbook for Teachers.

ERIC Educational Resources Information Center

Fuchs, Lucy

The humanities, an area of study often left out of the elementary curriculum, is essential as society becomes more global in nature. Because of the time restrictions in elementary teaching schedules, the humanities must be incorporated into the school program, not as an extra class, but as an enrichment of what is already taught. The purpose of…

A Mathematics Intervention for Low-Performing Finnish Second Graders: Findings from a Pilot Study

ERIC Educational Resources Information Center

Mononen, Riikka; Aunio, Pirjo

2014-01-01

Evidence-based practice is highly appreciated and demanded in the field of education, especially in relation to extra support provided for children struggling with learning. Currently, there is a lack of intervention studies in the area of mathematics. This study aimed to investigate the effects of a short mathematics intervention programme on…

Missing the Mark: Students Gain Little from Mandating Extra Math and Science Courses. ACT Policy Brief

ERIC Educational Resources Information Center

Buddin, Richard; Croft, Michelle

2014-01-01

For several decades, policymakers have embraced the goal of preparing students for college and careers, particularly for careers in the area of mathematics and science. The recent emphasis on these STEM (science, technology, engineering, and mathematics) subjects is due to the growth of STEM occupations and the perceived shortage of qualified…

Young Muslim Women's Experiences of Islam and Physical Education in Greece and Britain: A Comparative Study

ERIC Educational Resources Information Center

Dagkas, Symeon; Benn, Tansin

2006-01-01

Previous research suggests that Muslim women can experience particular problems when taking physical education (PE) lessons, for example with dress codes, mixed-teaching and exercise during Ramadan; and they can face restrictions in extra-curricular activities for cultural and religious reasons. The area is under-researched and there is little…

The Neighborhood Study Center Teacher Aide Program. 1969-1970 Evaluation.

ERIC Educational Resources Information Center

Community Services Planning Council, Sacramento, CA.

The program is designed to help provide the extra help with schoolwork that educationally and economically disadvantaged children need. The project has study centers in every low-income neighborhood in Sacramento, opened at the request of an organization or agency in the area, and staffed by volunteer tutors contribute one to two hours per week to…

Building Bridges with Student Mentoring: A Design Thinking Approach

ERIC Educational Resources Information Center

Parrish, Jesse; Parks, Rodney; Taylor, Alexander

2017-01-01

Increasingly, college students struggle to find translatable meaning in their college experiences. Following a program of study and dabbling in a few extra-curricular experiences proves to be enough to graduate, but somehow some students fail to thrive in all areas of well-being once they are at work. If this disconnect is rooted to a lack of…

Finite element analysis of intramedullary nailing and double locking plate for treating extra-articular proximal tibial fractures.

PubMed

Chen, Fancheng; Huang, Xiaowei; Ya, Yingsun; Ma, Fenfen; Qian, Zhi; Shi, Jifei; Guo, Shuolei; Yu, Baoqing

2018-01-16

Proximal tibia fractures are one of the most familiar fractures. Surgical approaches are usually needed for anatomical reduction. However, no single treatment method has been widely established as the standard care. Our present study aims to compare the stress and stability of intramedullary nails (IMN) fixation and double locking plate (DLP) fixation in the treatment of extra-articular proximal tibial fractures. A three-dimensional (3D) finite element model of the extra-articular proximal tibial fracture, whose 2-cm bone gap began 7 cm from the tibial plateau articular surface, was created fixed by different fixation implants. The axial compressive load on an adult knee during single-limb stance was imitated by an axial force of 2500 N with a distribution of 60% to the medial compartment, while the distal end was fixed effectively. The equivalent von Mises stress and displacement of the model was used as the output measures for analysis. The maximal equivalent von Mises stress value of the system in the IMN model was 293.23 MPa, which was higher comparing against that in the DLP fixation model (147.04 MPa). And the mean stress of the model in the IMN model (9.25 MPa) was higher than that of the DLP fixation system in terms of equivalent von Mises stress (EVMS) (P < 0.0001). The maximal value of displacement (sum) in the IMN system was 8.82 mm, which was lower than that in the DLP fixation system (9.48 mm). This study demonstrated that the stability provided by the locking plate fixation system was superior to the intramedullary nails fixation system and served as an alternative fixation for the extra-articular proximal tibial fractures of young patients.

Particle Simulations on Plasma and Dust Environment near Lunar Vertical Holes

NASA Astrophysics Data System (ADS)

Miyake, Y.; Funaki, Y.; Nishino, M. N.

2016-12-01

The Japanese lunar orbiter KAGUYA has revealed the existence of vertical holes on the Moon, which have spatial scales of tens of meters and are possible lava tube skylights. The hole structure has recently received particular attention, because the structure is regarded as evidence for past existence of underground lava flows. Furthermore, the holes have high potential as locations for constructing future lunar bases, because of fewer extra-lunar rays/particles and micrometeorites reaching the hole bottoms. In this sense, these holes are not only of significance in selenology, but are also interesting from the viewpoint of plasma environments. The dayside electrostatic environment near the lunar surface is governed by interactions among the solar wind plasma, photoelectrons, and the charged lunar surface, providing topologically complex boundaries to the plasma. Thus we applied three-dimensional, massively-parallelized, particle-in-cell simulations to the near-hole environment on the Moon. This year we have introduced a horizontal cavern opened at the vertical wall of the hole, assuming the presence of a subsurface lave tube. We will show some preliminary results on the surface potential and its nearly plasma environments. We also started to study the dynamics of submicron-sized charged dust grains around the distinctive landscape. We particularly focus on an effect of a stochastic charging process of such small dust grains. Because of their small surface areas, the dusts will get/lose one elementary charge infrequently, and thus charge amount owned by each dust should be a stochastic variable unlike a widely-known spacecraft charging process. We develop a numerical model of such a charging process, which will be embedded into the test particle analysis of the dust dynamics. We report some results from our simulations on the dust charging process and dynamics around the lunar hole.

Rawinsonde sounding data and synoptic conditions for the CCOPE-VAS experiment, July 1981

NASA Technical Reports Server (NTRS)

Henry, W. K.

1982-01-01

During the cooperative convective precipitation experiment, eight times were selected as VISSR atmospheric sounder (VAS) observation periods. A synoptic analysis of the surface and the 850, 700, 500, 300, and 200 maps for those eight periods. The satellite and radar data for those periods are included with the analyses. There were five rawinsonde stations in eastern Montana which made extra soundings for the VAS periods.

Cracking of porcelain surfaces arising from abrasive grinding with a dental air turbine.

PubMed

Chang, Chee W; Waddell, J Neil; Lyons, Karl M; Swain, Michael V

2011-12-01

The purpose of this in vitro study was to evaluate porcelain cracking induced by abrasive grinding with a conventional dental air turbine and abrasive diamond burs. Four commercially available porcelains were examined-Wieland ALLUX, Wieland ZIROX, IPS e.max Ceram, and IPS Empress Esthetic Veneering porcelain. Sixty discs of each porcelain type were fabricated according to manufacturer instructions, followed by an auto-glaze cycle. Abrasive grinding using fine, extra-fine, and ultra-fine diamond burs was carried out, using a conventional dental air turbine. The grinding parameters were standardized with regard to the magnitude of the force applied, rotational speed of the diamond bur, and flow rate of the water coolant. A testing apparatus was used to control the magnitude of force applied during the grinding procedure. The ground surfaces were then examined under scanning electron microscope. Cracking was seen for all porcelain types when ground with the fine bur. Cracking was not seen for specimens ground with the extra-fine or the ultra-fine bur. Wet abrasive grinding with a conventional dental air turbine and fine grit diamond burs has the potential to cause cracking in the four porcelain types tested. Similar abrasive grinding with smaller grit size particles does not cause similar observable cracking. © 2011 by the American College of Prosthodontists.

Extra-facial melasma: clinical, histopathological, and immunohistochemical case-control study.

PubMed

Ritter, C G; Fiss, D V C; Borges da Costa, J A T; de Carvalho, R R; Bauermann, G; Cestari, T F

2013-09-01

Extra-facial melasma is a prevalent dermatosis in some populations with special characteristics in relation to its clinical aspects and probable etiopathogenic factors. Few studies have attempted to address this alteration of pigmentation, which has become a challenge in clinical Dermatology. To assess the clinical histopathological and immunohistochemical characteristics of extra-facial melasma, comparing affected, and unaffected sites. Case-control study with 45 patients in each group (melasma and disease-free volunteers), assessing their clinical characteristics. In 36 patients, biopsies were performed on the lesion and the normal perilesional skin. Specimens were stained with HE and Fontana-Masson, and melanocytes analysed by immunohistochemistry. Objective measurements were accomplished by a specifically designed image analysis software. The melasma group had a mean age ± SD of 56.67 ± 8 years, the majority of them were women (86.7%) and 82.1% of the female cases had reached menopause. There were no significant differences between groups in terms of presence of comorbidities, use of medications or hormone therapies. For extra-facial melasma patients, family history of this dermatose and of previous facial melasma was significantly higher than in the control group (P < 0.05). The HE staining showed increased rectification and basal hyperpigmentation, solar elastosis, and collagen degeneration in the pigmented area (P < 0.05). There was a significant increase in melanin density in melasma biopsies, but the immunohistochemical tests did not detect a difference between the groups in terms of number of melanocytes. Extra-facial melasma appears to be related to menopause, family history, and personal history of facial melasma, in the studied population. Histopathology revealed a pattern similar to what has been described for facial melasma, with signs of solar degeneration, and a similar number of melanocytes, when comparing patients, and controls, suggesting that the hyperpigmentation is most likely the result of abnormal melanin production or distribution. © 2012 The Authors. Journal of the European Academy of Dermatology and Venereology © 2012 European Academy of Dermatology and Venereology.

NASA Technology Area 07: Human Exploration Destination Systems Roadmap

NASA Technical Reports Server (NTRS)

Kennedy, Kriss J.; Alexander, Leslie; Landis, Rob; Linne, Diane; Mclemore, Carole; Santiago-Maldonado, Edgardo; Brown, David L.

2011-01-01

This paper gives an overview of the National Aeronautics and Space Administration (NASA) Office of Chief Technologist (OCT) led Space Technology Roadmap definition efforts. This paper will given an executive summary of the technology area 07 (TA07) Human Exploration Destination Systems (HEDS). These are draft roadmaps being reviewed and updated by the National Research Council. Deep-space human exploration missions will require many game changing technologies to enable safe missions, become more independent, and enable intelligent autonomous operations and take advantage of the local resources to become self-sufficient thereby meeting the goal of sustained human presence in space. Taking advantage of in-situ resources enhances and enables revolutionary robotic and human missions beyond the traditional mission architectures and launch vehicle capabilities. Mobility systems will include in-space flying, surface roving, and Extra-vehicular Activity/Extravehicular Robotics (EVA/EVR) mobility. These push missions will take advantage of sustainability and supportability technologies that will allow mission independence to conduct human mission operations either on or near the Earth, in deep space, in the vicinity of Mars, or on the Martian surface while opening up commercialization opportunities in low Earth orbit (LEO) for research, industrial development, academia, and entertainment space industries. The Human Exploration Destination Systems (HEDS) Technology Area (TA) 7 Team has been chartered by the Office of the Chief Technologist (OCT) to strategically roadmap technology investments that will enable sustained human exploration and support NASA s missions and goals for at least the next 25 years. HEDS technologies will enable a sustained human presence for exploring destinations such as remote sites on Earth and beyond including, but not limited to, LaGrange points, low Earth orbit (LEO), high Earth orbit (HEO), geosynchronous orbit (GEO), the Moon, near-Earth objects (NEOs), which > 95% are asteroidal bodies, Phobos, Deimos, Mars, and beyond. The HEDS technology roadmap will strategically guide NASA and other U.S. Government agency technology investments that will result in capabilities enabling human exploration missions to diverse destinations generating high returns on investments.

Growth on demand: Reviewing the mechanobiology of stretched skin

PubMed Central

Zöllner, Alexander M.; Holland, Maria A.; Honda, Kord S.; Gosain, Arun K.; Kuhl, Ellen

2013-01-01

Skin is a highly dynamic, autoregulated, living system that responds to mechanical stretch through a net gain in skin surface area. Tissue expansion uses the concept of controlled overstretch to grow extra skin for defect repair in situ. While the short-term mechanics of stretched skin have been studied intensely by testing explanted tissue samples ex vivo, we know very little about the long-term biomechanics and mechanobiology of living skin in vivo. redHere we explore the long-term effects of mechanical stretch on the characteristics of living skin using a mathematical model for skin growth. We review the molecular mechanisms by which skin responds to mechanical loading and model their effects collectively in a single scalar-valued internal variable, the surface area growth. redThis allows us to adopt a continuum model for growing skin based on the multiplicative decomposition of the deformation gradient into a reversible elastic and an irreversible growth part.redTo demonstrate the inherent modularity of this approach, we implement growth as a user-defined constitutive subroutine into the general purpose implicit finite element program Abaqus/Standard. To illustrate the features of the model, we simulate the controlled area growth of skin in response to tissue expansion with multiple filling points in time. Our results demonstrate that the field theories of continuum mechanics can reliably predict the manipulation of thin biological membranes through mechanical overstretch. Our model could serve as a valuable tool to rationalize clinical process parameters such as expander geometry, expander size, filling volume, filling pressure, and inflation timing to minimize tissue necrosis and maximize patient comfort in plastic and reconstructive surgery. While initially developed for growing skin, our model can easily be generalized to arbitrary biological structures to explore the physiology and pathology of stretch-induced growth of other living systems such as hearts, arteries, bladders, intestines, ureters, muscles, and nerves. PMID:23623569

Pulmonary anatomy and a case of unilateral aplasia in a common snapping turtle (Chelydra serpentina): developmental perspectives on cryptodiran lungs.

PubMed

Schachner, E R; Sedlmayr, J C; Schott, R; Lyson, T R; Sanders, R K; Lambertz, M

2017-12-01

The common snapping turtle (Chelydra serpentina) is a well studied and broadly distributed member of Testudines; however, very little is known concerning developmental anomalies and soft tissue pathologies of turtles and other reptiles. Here, we present an unusual case of unilateral pulmonary aplasia, asymmetrical carapacial kyphosis, and mild scoliosis in a live adult C. serpentina. The detailed three-dimensional (3D) anatomy of the respiratory system in both the pathological and normal adult C. serpentina, and a hatchling are visualized using computed tomography (CT), microCT, and 3D digital anatomical models. In the pathological turtle, the right lung consists of an extrapulmonary bronchus that terminates in a blind stump with no lung present. The left lung is hyperinflated relative to the normal adult, occupying the extra coelomic space facilitated by the unusual mid-carapacial kyphotic bulge. The bronchial tree of the left lung retains the overall bauplan of the normal specimens, with some minor downstream variation in the number of secondary airways. The primary difference between the internal pulmonary structure of the pathological individual and that of a normal adult is a marked increase in the surface area and density of the parenchymal tissue originating from the secondary airways, a 14.3% increase in the surface area to volume ratio. Despite this, the aplasia has not had an impact upon the ability of the turtle to survive; however, it did interfere with aquatic locomotion and buoyancy control under water. This turtle represents a striking example of a non-fatal congenital defect and compensatory visceral hypertrophy. © 2017 Anatomical Society.

External validation of a published nomogram for prediction of brain metastasis in patients with extra-cerebral metastatic breast cancer and risk regression analysis.

PubMed

Genre, Ludivine; Roché, Henri; Varela, Léonel; Kanoun, Dorra; Ouali, Monia; Filleron, Thomas; Dalenc, Florence

2017-02-01

Survival of patients with metastatic breast cancer (MBC) suffering from brain metastasis (BM) is limited and this event is usually fatal. In 2010, the Graesslin's nomogram was published in order to predict subsequent BM in patients with breast cancer (BC) with extra-cerebral metastatic disease. This model aims to select a patient population at high risk for BM and thus will facilitate the design of prevention strategies and/or the impact of early treatment of BM in prospective clinical studies. Nomogram external validation was retrospectively applied to patients with BC and later BM between January 2005 and December 2012, treated in our institution. Moreover, risk factors of BM appearance were studied by Fine and Gray's competing risk analysis. Among 492 patients with MBC, 116 developed subsequent BM. Seventy of them were included for the nomogram validation. The discrimination is good (area under curve = 0.695 [95% confidence interval, 0.61-0.77]). Risk factors of BM appearance are: human epidermal growth factor receptor 2 (HER2) overexpression/amplification, triple-negative BC and number of extra-cerebral metastatic sites (>1). With a competing risk model, we highlight the nomogram interest for HER2+ tumour subgroup exclusively. Graesslin's nomogram external validation demonstrates exportability and reproducibility. Importantly, the competing risk model analysis provides additional information for the design of prospective trials concerning the early diagnosis of BM and/or preventive treatment on high risk patients with extra-cerebral metastatic BC. Copyright © 2016 Elsevier Ltd. All rights reserved.

Very Long Baseline Interferometry: Dependencies on Frequency Stability

NASA Astrophysics Data System (ADS)

Nothnagel, Axel; Nilsson, Tobias; Schuh, Harald

2018-04-01

Very Long Baseline Interferometry (VLBI) is a differential technique observing radiation of compact extra-galactic radio sources with pairs of radio telescopes. For these observations, the frequency standards at the telescopes need to have very high stability. In this article we discuss why this is, and we investigate exactly how precise the frequency standards need to be. Four areas where good clock performance is needed are considered: coherence, geodetic parameter estimation, correlator synchronization, and UT1 determination. We show that in order to ensure the highest accuracy of VLBI, stability similar to that of a hydrogen maser is needed for time-scales up to a few hours. In the article, we are considering both traditional VLBI where extra-galactic radio sources are observed, as well as observation of man-made artificial radio sources emitted by satellites or spacecrafts.

Associated degeneration of ventral tegmental area dopaminergic neurons in the rat nigrostriatal lactacystin model of parkinsonism and their neuroprotection by valproate

PubMed Central

Harrison, Ian F.; Anis, Hiba K.; Dexter, David T.

2016-01-01

Parkinson’s disease (PD) manifests clinically as bradykinesia, rigidity, and development of a resting tremor, primarily due to degeneration of dopaminergic nigrostriatal pathways in the brain. Intranigral administration of the irreversible ubiquitin proteasome system inhibitor, lactacystin, has been used extensively to model nigrostriatal degeneration in rats, and study the effects of candidate neuroprotective agents on the integrity of the dopaminergic nigrostriatal system. Recently however, adjacent extra-nigral brain regions such as the ventral tegmental area (VTA) have been noted to also become affected in this model, yet their integrity in studies of candidate neuroprotective agents in the model have largely been overlooked. Here we quantify the extent and distribution of dopaminergic degeneration in the VTA of rats intranigrally lesioned with lactacystin, and quantify the extent of VTA dopaminergic neuroprotection after systemic treatment with an epigenetic therapeutic agent, valproate, shown previously to protect dopaminergic SNpc neurons in this model. We found that unilateral intranigral administration of lactacystin resulted in a 53.81% and 31.72% interhemispheric loss of dopaminergic SNpc and VTA neurons, respectively. Daily systemic treatment of lactacystin lesioned rats with valproate however resulted in dose-dependant neuroprotection of VTA neurons. Our findings demonstrate that not only is the VTA also affected in the intranigral lactacystin rat model of PD, but that this extra-nigral brain region is substrate for neuroprotection by valproate, an agent shown previously to induce neuroprotection and neurorestoration of SNpc dopaminergic neurons in this model. Our results therefore suggest that valproate is a candidate for extra-nigral as well as intra-nigral neuroprotection. PMID:26742637

Associated degeneration of ventral tegmental area dopaminergic neurons in the rat nigrostriatal lactacystin model of parkinsonism and their neuroprotection by valproate.

PubMed

Harrison, Ian F; Anis, Hiba K; Dexter, David T

2016-02-12

Parkinson's disease (PD) manifests clinically as bradykinesia, rigidity, and development of a resting tremor, primarily due to degeneration of dopaminergic nigrostriatal pathways in the brain. Intranigral administration of the irreversible ubiquitin proteasome system inhibitor, lactacystin, has been used extensively to model nigrostriatal degeneration in rats, and study the effects of candidate neuroprotective agents on the integrity of the dopaminergic nigrostriatal system. Recently however, adjacent extra-nigral brain regions such as the ventral tegmental area (VTA) have been noted to also become affected in this model, yet their integrity in studies of candidate neuroprotective agents in the model have largely been overlooked. Here we quantify the extent and distribution of dopaminergic degeneration in the VTA of rats intranigrally lesioned with lactacystin, and quantify the extent of VTA dopaminergic neuroprotection after systemic treatment with an epigenetic therapeutic agent, valproate, shown previously to protect dopaminergic SNpc neurons in this model. We found that unilateral intranigral administration of lactacystin resulted in a 53.81% and 31.72% interhemispheric loss of dopaminergic SNpc and VTA neurons, respectively. Daily systemic treatment of lactacystin lesioned rats with valproate however resulted in dose-dependant neuroprotection of VTA neurons. Our findings demonstrate that not only is the VTA also affected in the intranigral lactacystin rat model of PD, but that this extra-nigral brain region is substrate for neuroprotection by valproate, an agent shown previously to induce neuroprotection and neurorestoration of SNpc dopaminergic neurons in this model. Our results therefore suggest that valproate is a candidate for extra-nigral as well as intra-nigral neuroprotection. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Novel white matter tract integrity metrics sensitive to Alzheimer disease progression.

PubMed

Fieremans, E; Benitez, A; Jensen, J H; Falangola, M F; Tabesh, A; Deardorff, R L; Spampinato, M V S; Babb, J S; Novikov, D S; Ferris, S H; Helpern, J A

2013-01-01

Along with cortical abnormalities, white matter microstructural changes such as axonal loss and myelin breakdown are implicated in the pathogenesis of Alzheimer disease. Recently, a white matter model was introduced that relates non-Gaussian diffusional kurtosis imaging metrics to characteristics of white matter tract integrity, including the axonal water fraction, the intra-axonal diffusivity, and the extra-axonal axial and radial diffusivities. This study reports these white matter tract integrity metrics in subjects with amnestic mild cognitive impairment (n = 12), Alzheimer disease (n = 14), and age-matched healthy controls (n = 15) in an effort to investigate their sensitivity, diagnostic accuracy, and associations with white matter changes through the course of Alzheimer disease. With tract-based spatial statistics and region-of-interest analyses, increased diffusivity in the extra-axonal space (extra-axonal axial and radial diffusivities) in several white matter tracts sensitively and accurately discriminated healthy controls from those with amnestic mild cognitive impairment (area under the receiver operating characteristic curve = 0.82-0.95), while widespread decreased axonal water fraction discriminated amnestic mild cognitive impairment from Alzheimer disease (area under the receiver operating characteristic curve = 0.84). Additionally, these white matter tract integrity metrics in the body of the corpus callosum were strongly correlated with processing speed in amnestic mild cognitive impairment (r = |0.80-0.82|, P < .001). These findings have implications for the course and spatial progression of white matter degeneration in Alzheimer disease, suggest the mechanisms by which these changes occur, and demonstrate the viability of these white matter tract integrity metrics as potential neuroimaging biomarkers of the earliest stages of Alzheimer disease and disease progression.

Extra-pair copulation and extra-range movements in Flammulated Owls

Treesearch

Richard T. Reynolds; Brian D. Linkhart

1990-01-01

We report an extra-pair copulation (EPC) in the Flammulated Owl (Otus flammeolus), the first in strigiforms, and document 21 cases of extra-range movements (ERMs) in this species. Extra-range movements occurred throughout nesting with both sexes participating: males anytime during nesting and females only after their young fledged. Males appear to make ERMs to...

Variation in parent-offspring kinship in socially monogamous systems with extra-pair reproduction and inbreeding.

PubMed

Reid, Jane M; Bocedi, Greta; Nietlisbach, Pirmin; Duthie, A Bradley; Wolak, Matthew E; Gow, Elizabeth A; Arcese, Peter

2016-07-01

Female extra-pair reproduction in socially monogamous systems is predicted to cause cuckolded socially-paired males to conditionally reduce paternal care, causing selection against extra-pair reproduction and underlying polyandry. However, existing models and empirical studies have not explicitly considered that cuckolded males might be related to their socially-paired female and/or to her extra-pair mate, and therefore be related to extra-pair offspring that they did not sire but could rear. Selection against paternal care, and hence against extra-pair reproduction, might then be weakened. We derive metrics that quantify allele-sharing between within-pair and extra-pair offspring and their mother and her socially-paired male in terms of coefficients of kinship and inbreeding. We use song sparrow (Melospiza melodia) paternity and pedigree data to quantify these metrics, and thereby quantify the joint effects of extra-pair reproduction and inbreeding on a brood's total allelic value to its socially-paired parents. Cuckolded male song sparrows were almost always detectably related to extra-pair offspring they reared. Consequently, although brood allelic value decreased substantially following female extra-pair reproduction, this decrease was reduced by within-pair and extra-pair reproduction among relatives. Such complex variation in kinship within nuclear families should be incorporated into models considering coevolutionary dynamics of extra-pair reproduction, parental care, and inbreeding. 2016 The Author(s). Evolution published by Wiley Periodicals, Inc. on behalf of The Society for the Study of Evolution.

Thermal analysis of regenerative-cooled pylon in multi-mode rocket based combined cycle engine

NASA Astrophysics Data System (ADS)

Yan, Dekun; He, Guoqiang; Li, Wenqiang; Zhang, Duo; Qin, Fei

2018-07-01

Combining pylon injector with rocket is an effective method to achieve efficient mixing and combustion in the RBCC engine. This study designs a fuel pylon with active cooling structure, and numerically investigates the coupled heat transfer between active cooling process in the pylon and combustion in the combustor in different modes. Effect of the chemical reaction of the fuel on the flow, heat transfer and physical characteristics is also discussed. The numerical results present a good agreement with the experimental data. Results indicate that drastic supplementary combustion caused by rocket gas and secondary combustion caused by the fuel injection from the pylon result in severe thermal load on the pylon. Although regenerative cooling without cracking can reduce pylon's temperature below the allowable limit, a high-temperature area appears in the middle and nail section of the pylon due to the coolant's insufficient convective heat transfer coefficient. Comparatively, endothermic cracking can provide extra chemical heat sink for the coolant and low velocity contributes to prolong the reaction time to increase the heat absorption from chemical reaction, which further lowers and unifies the pylon surface temperature.

The Subpolar North Atlantic Ocean Heat Content Variability and its Decomposition.

PubMed

Zhang, Weiwei; Yan, Xiao-Hai

2017-10-23

The Subpolar North Atlantic (SPNA) is one of the most important areas to global climate because its ocean heat content (OHC) is highly correlated with the Atlantic Meridional Overturning Circulation (AMOC), and its circulation strength affects the salt transport by the AMOC, which in turn feeds and sustains the strength of the AMOC. Moreover, the recent global surface warming "hiatus" may be attributed to the SPNA as one of the major planetary heat sinks. Although almost synchronized before 1996, the OHC has greater spatial disparities afterwards, which cannot be explained as driven by the North Atlantic Oscillation (NAO). Temperature decomposition reveals that the western SPNA OHC is mainly determined by the along isopycnal changes, while in the eastern SPNA along isopycnal changes and isopycnal undulation are both important. Further analysis indicates that heat flux dominates the western SPNA OHC, but in the eastern SPNA wind forcing affects the OHC significantly. It is worth noting that the along isopycnal OHC changes can also induce heaving, thus the observed heaving domination in global oceans cannot mask the extra heat in the ocean during the recent "hiatus".

Recirculation or artificial aeration in vertical flow constructed wetlands: a comparative study for treating high load wastewater.

PubMed

Foladori, Paola; Ruaben, Jenny; Ortigara, Angela R C

2013-12-01

Vertical subsurface-flow constructed wetlands at pilot-scale have been applied to treat high hydraulic and organic loads by implementing the following configurations: (1) intermittent recirculation of the treated wastewater from the bottom to the top of the bed, (2) intermittent artificial aeration supplied at the bottom of the bed and (3) the combination of both. These configurations were operated with a saturated bottom layer for a 6h-treatment phase, followed by a free drainage phase prior to a new feeding. COD removal efficiency was 85-90% in all the configurations and removed loads were 54-70 gCOD m(-2)d(-1). The aerated and recirculated wetland resulted in a higher total nitrogen removal (8.6 gN m(-2)d(-1)) due to simultaneous nitrification/denitrification, even in the presence of intermittent aeration (6.8 Nm(3)m(-2)d(-1)). The extra investment needed for implementing aeration/recirculation would be compensated for by a reduction of the surface area per population equivalent, which decreased to 1.5m(2)/PE. Copyright © 2013 Elsevier Ltd. All rights reserved.

Fibrillar Adhesive for Climbing Robots

NASA Technical Reports Server (NTRS)

Pamess, Aaron; White, Victor E.

2013-01-01

A climbing robot needs to use its adhesive patches over and over again as it scales a slope. Replacing the adhesive at each step is generally impractical. If the adhesive or attachment mechanism cannot be used repeatedly, then the robot must carry an extra load of this adhesive to apply a fresh layer with each move. Common failure modes include tearing, contamination by dirt, plastic deformation of fibers, and damage from loading/ unloading. A gecko-like fibrillar adhesive has been developed that has been shown useful for climbing robots, and may later prove useful for grasping, anchoring, and medical applications. The material consists of a hierarchical fibrillar structure that currently contains two levels, but may be extended to three or four levels in continuing work. The contacting level has tens of thousands of microscopic fibers made from a rubberlike material that bend over and create intimate contact with a surface to achieve maximum van der Waals forces. By maximizing the real area of contact that these fibers make and minimizing the bending energy necessary to achieve that contact, the net amount of adhesion has been improved dramatically.

Cross-stacked carbon nanotube film as an additional built-in current collector and adsorption layer for high-performance lithium sulfur batteries.

PubMed

Sun, Li; Kong, Weibang; Li, Mengya; Wu, Hengcai; Jiang, Kaili; Li, Qunqing; Zhang, Yihe; Wang, Jiaping; Fan, Shoushan

2016-02-19

Cross-stacked carbon nanotube (CNT) film is proposed as an additional built-in current collector and adsorption layer in sulfur cathodes for advanced lithium sulfur (Li-S) batteries. On one hand, the CNT film with high conductivity, microstructural rough surface, high flexibility and mechanical durability retains stable and direct electronic contact with the sulfur cathode materials, therefore decreasing internal resistivity and suppressing polarization of the cathode. On the other hand, the highly porous structure and the high surface area of the CNT film provide abundant adsorption points to support and confine sulfur cathode materials, alleviate their aggregation and promote high sulfur utilization. Moreover, the lightweight and compact structure of the CNT film adds no extra weight or volume to the sulfur cathode, benefitting the improvement of energy densities. Based on these characteristics, the sulfur cathode with a 100-layer cross-stacked CNT film presents excellent rate performances with capacities of 986, 922 and 874 mAh g(-1) at cycling rates of 0.2C, 0.5C and 1C for sulfur loading of 60 wt%, corresponding to an improvement of 52%, 109% and 146% compared to that without a CNT film. Promising cycling performances are also demonstrated, offering great potential for scaled-up production of sulfur cathodes for Li-S batteries.

The Role of Extra-Credit Assignments in the Teaching of World Languages

ERIC Educational Resources Information Center

Alley, David

2011-01-01

The granting of extra credit is a hotly debated topic in all fields of education. Teachers are reluctant to offer extra credit for fear of inflating grades, but students are persistent in their demands for extra-credit points to which they have become accustomed. This article considers extra-credit assignments in the teaching of world languages.…

Atomic and electronic structures of Si(1 1 1)-\\left(\\sqrt{\\mathbf{3}}\\times\\sqrt{\\mathbf{3}}\\right)\\text{R}\\mathbf{3}{{\\mathbf{0}}^{\\circ}} -Au and (6 × 6)-Au surfaces

NASA Astrophysics Data System (ADS)

Patterson, C. H.

2015-12-01

Si(1 1 1)-Au surfaces with around one monolayer of Au exhibit many ordered structures and structures containing disordered domain walls. Hybrid density functional theory (DFT) calculations presented here reveal the origin of these complex structures and tendency to form domain walls. The conjugate honeycomb chain trimer (CHCT) structure of the \\sqrt{3} -Au phase contains Si atoms with non-bonding surface states which can bind Au atoms in pairs in interstices of the CHCT structure and make this surface metallic. Si adatoms adsorbed on the \\sqrt{3} -Au surface induce a gapped surface through interaction with the non-bonding states. Adsorption of extra Au atoms in interstitial sites of the \\sqrt{3} -Au surface is stabilized by interaction with the non-bonding orbitals and leads to higher coverage ordered structures including the ≤ft(6× 6\\right) -Au phase. Extra Au atoms bound in interstitial sites of the \\sqrt{3} -Au surface result in top layer Si atoms with an SiAu4 butterfly wing configuration. The structure of a ≤ft(6× 6\\right) -Au phase, whose in-plane top atomic layer positions were previously determined by an electron holography technique (Grozea et al 1998 Surf. Sci. 418 32), is calculated using total energy minimization. The Patterson function for this structure is calculated and is in good agreement with data from an in-plane x-ray diffraction study (Dornisch et al 1991 Phys. Rev. B 44 11221). Filled and empty state scanning tunneling microscopy (STM) images are calculated for domain walls and the ≤ft(6× 6\\right) -Au structure. The ≤ft(6× 6\\right) -Au phase is 2D chiral and this is evident in computed and actual STM images. ≤ft(6× 6\\right) -Au and domain wall structures contain the SiAu4 motif with a butterfly wing shape. Chemical bonding within the Si-Au top layers of the \\sqrt{3} -Au and ≤ft(6× 6\\right) -Au surfaces is analyzed and an explanation for the SiAu4 motif structure is given.

ENRICHMENT PROGRAM FOR ACADEMICALLY TALENTED JUNIOR HIGH SCHOOL STUDENTS FROM LOW INCOME FAMILIES.

ERIC Educational Resources Information Center

PRESSMAN, HARVEY

A PROPOSAL FOR AN ENRICHMENT PROGRAM FOR ACADEMICALLY TALENTED JUNIOR HIGH SCHOOL STUDENTS FROM LOW-INCOME FAMILIES IN CERTAIN AREAS OF BOSTON IS PRESENTED. BASIC ASSUMPTIONS ARE THAT THERE IS AND OBVIOUS AND PRESSING NEED TO GIVE EXTRA HELP TO THE ABLE STUDENT FROM A DISADVANTAGED BACKGROUND, AND THAT A RELATIVELY BRIEF ENRICHMENT EXPERIENCE FOR…

Social Welfare and Minding the Achievement Gap: A View from Denmark

ERIC Educational Resources Information Center

Ringsmose, Charlotte

2012-01-01

In Denmark, the welfare system has evened out the gaps between rich and poor. Schools and child care settings all over the country have an equal level of resources provided by the state, and are financed through taxes. Schools and child care settings in areas with families of lower socioeconomic status (SES) get extra money and resources. All…

The High School "Space Race": Implications of a School-Choice Market Environment for a Michigan Metropolitan Region

ERIC Educational Resources Information Center

Militello, Matthew; Metzger, Scott Alan; Bowers, Alex J.

2008-01-01

This article examines the implications of competition between school districts in a mid-Michigan metropolitan area. Over the 10-year period after Michigan's major school-funding reform in 1994, many urban and suburban districts found themselves competing for per-pupil state funding. Suburban districts need extra students to make up budgetary…

Teaching the Writing Process as a First and Second Language Revisited: Are They the Same?

ERIC Educational Resources Information Center

Lincoln, Felicia; Ben Idris, Anisa

2015-01-01

Research on the second writing process is not recent. Both first and second writing processes have been in the area of argument among scholars. It has been confirmed that both first and second writers nearly all practice similar physical activities pre-writing, during, and post writing stages; however, they still differ in the inner extra thinking…

A stroke in the woods.

PubMed

McQueen, Carl; Roberts, David; Evans, Daniel; Wyse, Matthew

2013-06-01

Responding to incidents where access by conventional land-based ambulance assets is limited is an important facet of helicopter emergency medical services operations in rural areas. Often in such cases extra resources must be utilised to enable access to patients and facilitate egress to transport platforms. This case illustrates the importance of coordination and integration with additional resources that can be utilised in remote rural locations.

Diagnosis and treatment of paediatric tuberculosis: An insight review.

PubMed

Mandal, Nityananda; Anand, Parveen Kumar; Gautam, Subhash; Das, Shritam; Hussain, Tahziba

2017-08-01

Tuberculosis (TB) is a major public health problem, invading all age groups world-wide. It is an opportunistic infection affecting the individuals alone or with co-infections. Childhood TB is a neglected aspect and a significant health problem in epidemic areas. It constitutes more than 20% of TB incidence. Pediatric TB exists in the shadow of adult TB. The clinicians concentrate on pulmonary manifestation of TB, whereas it is a major problem in both pulmonary and extra-pulmonary infections. The rate of infection with this disease is mostly associated with poverty, social disruption and human immunodeficiency virus (HIV) infection. The diagnosis of extra-pulmonary TB (EPTB) is more difficult than pulmonary TB (PTB). Delayed diagnosis and executive treatment contribute to increase in the mortality rate in endemic areas. This article provides the evidence-based simple and safe screening method, indicating rapid, highly sensitive and specific diagnostic tests for pulmonary and EPTB in children. The most important aspect of treatment is the correct course of anti-tubercular drugs. This review serves the purpose of quick reference for microbiologists, epidemiologists, academicians, students and researchers. It provides guidance regarding early diagnosis and treatment accuracy of pediatric TB.

Design of the TMT Mid-Infrared Echelle: Science Drivers and Design Overview

DTIC Science & Technology

2006-01-01

plausibility of an extra-terrestrial origin for the prebiotic compounds that led to the emergence of life on Earth. MIRES imaging of debris disks will...explore mechanisms by which water and prebiotic organic compounds may have been delivered to planetary surfaces. These studies will be highly synergistic...that are precursors to complex prebiotic compounds. The high sensitivity also allows the exploration of a wider range of wavelengths, including those

In orbit sun calibration performance of Landsat-2

NASA Technical Reports Server (NTRS)

Horan, J. J.; Schwartz, D. S.; Love, J. D.

1975-01-01

Sun calibration data from Landsat-2 are presented and compared with those from Landsat-1 (ERTS-1). The data support the hypothesis that organic contamination caused the poor performance of the Landsat-1 sun calibration mirror, since extra cleanliness precautions were taken with the Landsat-2 mirror. These precautions are described; of particular importance was the aluminum foil covering kept close to the reflective surfaces of the second mirror during the prelaunch period.

Modeling Frequency Fluctuations in Surface Contaminated Crystal Resonators

DTIC Science & Technology

1990-07-23

resonator cannot be described by cubic polynomial equations. (Cubic polynomial equations are used in the quartz resonator industry to describe frequency...frequency M = 28 ( nitrogen ), fluctuations- are studied. Our study is motivated by the the rate of-arrival ro of nitrogen molecules at a contami...the pressure If the product Qf 0 is constant, as is usually the case, then gradually. Extra care must be taken to keep constant all their spectral

Quantitative Comparison and Analysis of Species-Specific Wound Biofilm Virulence Using an In Vivo, Rabbit-Ear Model

DTIC Science & Technology

2012-09-01

College of Surgeons) Bacterial biofilms, defined as a surface-adhered, complex community of aggregated bacteria within a matrix of extra- cellular...Seth, Geringer, Galiano, Mustoe, Hong) and the Microbiology Branch, US Army Dental and Trauma Research Detach- ment, Institute of Surgical Research...biofilms use an intracellular adhesin to prevent phagocyto- sis, while P aeruginosa biofilms may diminish the neutro- phils’ oxidative potential36,37 or

Evolving Hořava cosmological horizons

NASA Astrophysics Data System (ADS)

Fathi, Mohsen; Mohseni, Morteza

2016-09-01

Several sets of radially propagating null congruence generators are exploited in order to form 3-dimensional marginally trapped surfaces, referred to as black hole and cosmological apparent horizons in a Hořava universe. Based on this method, we deal with the characteristics of the 2-dimensional space-like spheres of symmetry and the peculiarities of having trapping horizons. Moreover, we apply this method in standard expanding and contracting FLRW cosmological models of a Hořava universe to investigate the conditions under which the extra parameters of the theory may lead to trapped/anti-trapped surfaces both in the future and in the past. We also include the cases of negative time, referred to as the finite past, and discuss the formation of anti-trapped surfaces inside the cosmological apparent horizons.

Polyethylene wear in Oxford unicompartmental knee replacement: a retrieval study of 47 bearings.

PubMed

Kendrick, B J L; Longino, D; Pandit, H; Svard, U; Gill, H S; Dodd, C A F; Murray, D W; Price, A J

2010-03-01

The Oxford Unicompartmental Knee replacement (UKR) was introduced as a design to reduce polyethylene wear. There has been one previous retrieval study involving this implant, which reported very low rates of wear in some specimens but abnormal patterns of wear in others. There has been no further investigation of these abnormal patterns. The bearings were retrieved from 47 patients who had received a medial Oxford UKR for anteromedial osteoarthritis of the knee. None had been studied previously. The mean time to revision was 8.4 years (sd 4.1), with 20 having been implanted for over ten years. The macroscopic pattern of polyethylene wear and the linear penetration were recorded for each bearing. The mean rate of linear penetration was 0.07 mm/year. The patterns of wear fell into three categories, each with a different rate of linear penetration; 1) no abnormal macroscopic wear and a normal articular surface, n = 16 (linear penetration rate = 0.01 mm/year); 2) abnormal macroscopic wear and normal articular surfaces with extra-articular impingement, n = 16 (linear penetration rate = 0.05 mm/year); 3) abnormal macroscopic wear and abnormal articular surfaces with intra-articular impingement +/- signs of non-congruous articulation, n = 15 (linear penetration rate = 0.12 mm/year). The differences in linear penetration rate were statistically significant (p < 0.001). These results show that very low rates of polyethylene wear are possible if the device functions normally. However, if the bearing displays suboptimal function (extra-articular, intra-articular impingement or incongruous articulation) the rates of wear increase significantly.

Reduction in the exchange of coastal dissolved organic matter and microgels by inputs of extra riverine organic matter.

PubMed

Shiu, Ruei-Feng; Lee, Chon-Lin; Chin, Wei-Chun

2017-12-15

Rivers drive large amounts of terrestrial and riverine organic matter into oceans. These organic materials may alter the self-assembly of marine dissolved organic matter (DOM) polymers into microgels and can even affect the behavior of existing natural microgels. We used Suwannee River humic acid, fulvic acid, and natural organic matter as a model of riverine organic matter (ROM) to investigate the impacts of ROM input on DOM polymer and microgel conversion. Our results indicated that the release of extra ROM, even at low concentrations (0.1-10 mg L -1 ), into the marine organic matter pool decreased the size of self-assembled DOM polymers (from 4-5 μm to < 1 μm) and dispersed the existing natural microgels into smaller particles (from 4-5 μm to 2-3 μm). The particle size of the microgel phase was also less sensitive than that of the DOM polymers to external changes (addition of ROM). This size reduction in DOM aggregation and existing microgels may be closely tied to the surface chemistry of the organic matter, such as negative surface charge stabilization and Ca 2+ cross-linking bridges. These findings reveal that ROM inputs may therefore impede the self-assembly of DOM polymers into particulate organic matter and reduce the sedimentation flux of organic carbon and other elements from surface water to the deep ocean, thereby disturbing the biological pump, the downward transportation of nutrients, and the marine organic carbon cycle. Copyright © 2017 Elsevier Ltd. All rights reserved.

The paradoxical effect of extra-virgin olive oil on oxidative phenomena during in vitro co-digestion with meat.

PubMed

Martini, Serena; Cavalchi, Martina; Conte, Angela; Tagliazucchi, Davide

2018-07-01

Extra-virgin olive oil is an integral part of the Mediterranean diet and its consumption has been associated with a reduction risk of chronic diseases. Here we tested the potential of extra-virgin olive oil to limit the oxidative phenomena during in vitro gastro-intestinal co-digestion with turkey breast meat. The extra-virgin olive oil was particularly rich in oleuropein aglycone isomers, which represented the 66.8% of total phenolic determined with MS/MS experiments. Meals supplemented with extra-virgin olive oil equivocally affected lipid peroxidation. At low concentration (2.5% respect to meat), a significant inhibition of lipid oxidation was observed, whereas lipid peroxidation was greatly enhanced when the amount of extra-virgin olive oil was increased in the gastro-intestinal system. The inhibitory effect observed at 2.5% extra-virgin olive oil was due to the antioxidant properties of extra-virgin olive oil phenolic compounds. At high concentration, extra-virgin olive oil phenolic compounds (especially hydroxytyrosol-derivative) behaved as pro-oxidants increasing the generation of lipid hydroperoxides from meat. At the same time, the presence in the digestive system of catalysers from meat induced the peroxidation of extra-virgin olive oil fatty acids, which was further intensified by the pro-oxidant activity of extra-virgin olive oil phenolic compounds. Our study underlined the importance of the timing and amount of consumption of extra-virgin olive oil as well as its phenolic composition in limiting the peroxidative phenomena on meat lipids during digestion. Copyright © 2018 Elsevier Ltd. All rights reserved.

Extra-Mediterranean glacial refugia in a Mediterranean faunal element: the phylogeography of the chalk-hill blue Polyommatus coridon (Lepidoptera, Lycaenidae)

PubMed Central

Kühne, Gero; Kosuch, Joachim; Hochkirch, Axel; Schmitt, Thomas

2017-01-01

Most warm-adapted Central European species are thought to have survived ice ages exclusively in Mediterranean refugia. During recent years, this point of view has been questioned. Therefore, we tested the hypothesis that extra-Mediterranean refugia also played a role in warm-adapted insect species and selected the chalk-hill blue, Polyommatus coridon. We sequenced two mitochondrial loci (COI, CR) in 150 individuals from 30 populations covering nearly the complete range. Minimum spanning networks and other statistical analyses concordantly revealed four genetic lineages with strong phylogeographic signal: a western group in Italy, France and western/central Germany, an eastern lineage in the Balkan Peninsula, the Carpathian Basin and eastern Central Europe, an Alpine group with populations in the Alps and southern Germany and a Pyrenean group. Our results are generally consistent with previous analyses for P. coridon based on allozymes and DNA sequences, but provide additional insights. We propose that these four lineages have evolved during allopatry in different glacial refugia, two in typical Mediterranean refugia (Apennines and Balkan Peninsulas), but two in extra-Mediterranean areas south of the Alps and Pyrenees. This supports survival of warm-adapted organisms in these regions in close geographic proximity to the refugia of high mountain species.

A network model for the propagation of Hepatitis C with HIV co-infection

NASA Astrophysics Data System (ADS)

Nucit, Arnaud; Randon-Furling, Julien

2017-05-01

We define and examine a model of epidemic propagation for a virus such as Hepatitis C (with HIV co-infection) on a network of networks, namely the network of French urban areas. One network level is that of the individual interactions inside each urban area. The second level is that of the areas themselves, linked by individuals travelling between these areas and potentially helping the epidemic spread from one city to another. We choose to encode the second level of the network as extra, special nodes in the first level. We observe that such an encoding leads to sensible results in terms of the extent and speed of propagation of an epidemic, depending on its source point.

Geologic Map of Part of the Uinkaret Volcanic Field, Mohave County, Northwestern Arizona

USGS Publications Warehouse

Billingsley, George H.; Hamblin, W. Kenneth; Wellmeyer, Jessica L.; Dudash, Stephanie L.

2001-01-01

The geologic map of part of the Uinkaret Volcanic Field is one product of a cooperative project between the U.S. Geological Survey, the National Park Service, and the Bureau of Land Management to provide geologic information about this part of the Grand Canyon-Parashant Canyon National Monument of Arizona. The Uinkaret Volcanic Field is a unique part of western Grand Canyon where volcanic rocks have preserved the geomorphic development of the landscape. Most of the Grand Canyon, and parts of adjacent plateaus have already been mapped. This map completes one of the remaining areas where uniform quality geologic mapping was needed. A few dozen volcanoes and lava flows within the Grand Canyon are not included in the map area, but their geologic significance to Grand Canyon development is documented by Hamblin (1994) and mapped by Billingsley and Huntoon (1983) and Wenrich and others (1997). The geologic information in this report may be useful to resource managers of the Bureau of Land Management for range management, biological, archaeological, and flood control programs. The map area lies within the Shivwits, Uinkaret, and Kanab Plateaus, which are subplateaus of the Colorado Plateaus physiographic province (Billingsley and others, 1997), and is part of the Arizona Strip north of the Colorado River. The nearest settlement is Colorado City, Arizona, about 58 km (36 mi) north of the map area (fig. 1). Elevations range from about 2,447 m (8,029 ft) at Mount Trumbull, in the northwest quarter of the map area, to about 732 m (2,400 ft) in Cove Canyon, in the southeast quarter of the map area. Vehicle access is via the Toroweap and Mount Trumbull dirt roads (fig. 1). Unimproved dirt roads traverse other parts of the area except in designated wilderness. Extra fuel, two spare tires, and extra food and water are highly recommended for travelers in this remote area. The U.S. Bureau of Land Management, Arizona Strip Field Office, St. George, Utah manages most of the area. In addition, there are 12 sections belonging to the State of Arizona, about 12 sections are private land, and several sections are within the Grand Canyon National Park and Lake Mead National Recreational Area (U.S. Department of the Interior, 1993). The private land is in Potato Valley and Lake Valley, southwest and west of Mount Trumbull, and in Whitmore Canyon and Toroweap (Tuweap) Valley. Portions of the Sawmill Mountains, Mount Logan, and Mount Trumbull areas were originally established as part of the Dixie National Forest in 1904. In 1924, Dixie National Forest land became part of the Kaibab National Forest. Then on February 13, 1974, management of this part of the Kaibab National Forest was transferred to the Bureau of Land Management, Arizona Strip Field Office (personal commun. Becky Hammond, Bureau of Land Management, 1997). Mount Logan and part of the Sawmill Mountains are now designated as the Mount Logan Wilderness Area, and Mount Trumbull is designated as the Mount Trumbull Wilderness Area. Most of the map area is now part of the new Grand Canyon-Parashant Canyon National Monument established January 11, 2000. Lower elevations within Hells Hollow, Whitmore Canyon, Toroweap Valley, and Cove Canyon support a sparse growth of sagebrush, cactus, grass, and a variety of desert shrubs. Sagebrush, grass, cactus, cliffrose bush, pinion pine, and juniper trees thrive at elevations above 1,830 m (6,000 ft). Ponderosa pine and oak forests thrive at higher elevations in the Mount Trumbull and Mount Logan areas. Surface runoff within the map area drains south towards the Colorado River through Hells Hole, Hollow, Whitmore Canyon, Toroweap Valley, and Cove Canyon. Upper Toroweap Valley, upper Hells Hollow, and Whitmore Canyon are part of the physiographic area of Grand Canyon, but are not within Grand Canyon National Park (Billingsley and others, 1997). As of January 11, 2000, these areas are now part of the new Grand Canyon-Parashant

Correlation Assessment of Climate and Geographic Distribution of Tuberculosis Using Geographical Information System (GIS).

PubMed

Beiranvand, Reza; Karimi, Asrin; Delpisheh, Ali; Sayehmiri, Kourosh; Soleimani, Samira; Ghalavandi, Shahnaz

2016-01-01

Tuberculosis (TB) spread pattern is influenced by geographic and social factors. Nowadays Geographic Information System (GIS) is one of the most important epidemiological instrumentation identifying high-risk population groups and geographic areas of TB. The aim of this study was to determine the correlation between climate and geographic distribution of TB in Khuzestan Province using GIS during 2005-2012. Through an ecological study, all 6363 patients with definite diagnosis of TB from 2005 until the end of September 2012 in Khuzestan Province, southern Iran were diagnosed. Data were recorded using TB- Register software. Tuberculosis incidence based on the climate and the average of annual rain was evaluated using GIS. Data were analyzed through SPSS software. Independent t-test, ANOVA, Linear regression, Pearson and Eta correlation coefficient with a significance level of less than 5% were used for the statistical analysis. The TB incidence was different in various geographic conditions. The highest mean of TB cumulative incidence rate was observed in extra dry areas (P= 0.017). There was a significant inverse correlation between annual rain rate and TB incidence rate (R= -0.45, P= 0.001). The lowest TB incidence rate (0-100 cases per 100,000) was in areas with the average of annual rain more than 1000 mm (P= 0.003). The risk of TB has a strong relationship with climate and the average of annual rain, so that the risk of TB in areas with low annual rainfall and extra dry climate is more than other regions. Services and special cares to high-risk regions of TB are recommended.

Probabilistic assessment of safe groundwater utilization in farmed fish ponds of blackfoot disease hyperendemic areas in terms of the regulation of arsenic concentrations.

PubMed

Jang, Cheng-Shin

2008-03-15

This work probabilistically explored a safe utilization ratio (UR) of groundwater in fish ponds located in blackfoot disease hyperendemic areas in terms of the regulation of arsenic (As) concentrations. Sequential indicator simulation was used to reproduce As concentrations in groundwater and to propagate their uncertainty. Corresponding URs of groundwater were obtained from the relationship of mass balance between reproduced As concentrations in groundwater and the As regulation in farmed fish ponds. Three levels were adopted to evaluate the UR - UR> or =0.5, 0.5>UR> or =0.1 and UR<0.1. The high probability of the UR> or =0.5 level presents in the northern and southern regions where groundwater can be a major water source. The high probability of the 0.5>UR> or =0.1 level is mainly distributed in the central-coastal, central-eastern and southeastern regions where groundwater should be considered as a subordinate water source. Being available, extra surface water has priority over providing aquacultural needs of the regions with the high probability of the UR> or =0.5 and 0.5>UR> or =0.1 levels. In the regions with the high probability of the UR<0.1 level, in the central-coastal and southwestern regions, groundwater utilization should be reduced substantially or even prohibited completely for no adverse effects on human health.

[Primary malignant melanoma of the central nervous system: A diagnostic challenge].

PubMed

Quillo-Olvera, Javier; Uribe-Olalde, Juan Salvador; Alcántara-Gómez, Leopoldo Alberto; Rejón-Pérez, Jorge Dax; Palomera-Gómez, Héctor Guillermo

2015-01-01

The rare incidence of primary malignant melanoma of the central nervous system and its ability to mimic other melanocytic tumors on images makes it a diagnostic challenge for the neurosurgeon. A 51-year-old patient, with a tumor located in the right forniceal callosum area. Total surgical excision was performed. Histopathological result was consistent with the diagnosis of primary malignant melanoma of the central nervous system, after ruling out extra cranial and extra spinal melanocytic lesions. The primary malignant melanoma of the central nervous system is extremely rare. There are features in magnetic resonance imaging that increase the diagnostic suspicion; nevertheless there are other tumors with more prevalence that share some of these features through image. Since there is not an established therapeutic standard its prognosis is discouraging. Copyright © 2015 Academia Mexicana de Cirugía A.C. Published by Masson Doyma México S.A. All rights reserved.

Generalized contact and improved frictional heating in the material point method

NASA Astrophysics Data System (ADS)

Nairn, J. A.; Bardenhagen, S. G.; Smith, G. D.

2017-09-01

The material point method (MPM) has proved to be an effective particle method for computational mechanics modeling of problems involving contact, but all prior applications have been limited to Coulomb friction. This paper generalizes the MPM approach for contact to handle any friction law with examples given for friction with adhesion or with a velocity-dependent coefficient of friction. Accounting for adhesion requires an extra calculation to evaluate contact area. Implementation of velocity-dependent laws usually needs numerical methods to find contacting forces. The friction process involves work which can be converted into heat. This paper provides a new method for calculating frictional heating that accounts for interfacial acceleration during the time step. The acceleration terms is small for many problems, but temporal convergence of heating effects for problems involving vibrations and high contact forces is improved by the new method. Fortunately, the new method needs few extra calculations and therefore is recommended for all simulations.

Drivers behind widespread informal payments in the Romanian public health care system: From tolerance to corruption to socio-economic and spatial patterns.

PubMed

Horodnic, Adrian V; Mazilu, Sorin; Oprea, Liviu

2018-03-15

In order to explain informal payments in public health care services in Romania, this paper evaluates the relationship between extra payments or valuable gifts (apart from official fees) and the level of tolerance to corruption, as well as the socio-economic and spatial patterns across those individuals offering informal payments. To evaluate this, a survey undertaken in 2013 is reported. Using logistic regression analysis, the findings are that patients with a high tolerance to corruption, high socio-economic risk (those divorced, separated, or with other form of marital status, and those not working), and located in rural or less affluent areas are more likely to offer (apart from official fees) extra payments or valuable gifts for health care services. The paper concludes by discussing the health policy implications. Copyright © 2018 John Wiley & Sons, Ltd.

Exploring Options for an Integrated Water Level Observation Network in Alaska

NASA Astrophysics Data System (ADS)

McCammon, M.

2016-02-01

Portions' of Alaska's remote coastlines are among the Nation's most vulnerable to geohazards such as tsunami, extra-tropical storm surge, and erosion; and the availability of observations of water levels, ocean waves, and river discharge are severely lacking to support water level warnings and forecasts. Alaska is experiencing dramatic reductions in sea ice cover, changes in extra-tropical storm surge patterns, and thawing permafrost. These conditions are endangering coastal populations throughout the State. Gaps in the ocean observing system limit our State's ability to provide useful marine and sea ice forecasts, especially in the Arctic. A spectrum of observation platforms may provide an optimal solution for filling the most critical gaps in these coastal and ocean areas. The collaborations described in this talk and better leveraging of resources and capabilities across federal, state, and academic partners will provide the best opportunity for advancing our science capacity and capabilities in this remote region.

Generalized contact and improved frictional heating in the material point method

NASA Astrophysics Data System (ADS)

Nairn, J. A.; Bardenhagen, S. G.; Smith, G. D.

2018-07-01

The material point method (MPM) has proved to be an effective particle method for computational mechanics modeling of problems involving contact, but all prior applications have been limited to Coulomb friction. This paper generalizes the MPM approach for contact to handle any friction law with examples given for friction with adhesion or with a velocity-dependent coefficient of friction. Accounting for adhesion requires an extra calculation to evaluate contact area. Implementation of velocity-dependent laws usually needs numerical methods to find contacting forces. The friction process involves work which can be converted into heat. This paper provides a new method for calculating frictional heating that accounts for interfacial acceleration during the time step. The acceleration terms is small for many problems, but temporal convergence of heating effects for problems involving vibrations and high contact forces is improved by the new method. Fortunately, the new method needs few extra calculations and therefore is recommended for all simulations.

A continuous surface reconstruction method on point cloud captured from a 3D surface photogrammetry system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Wenyang; Cheung, Yam; Sabouri, Pouya

2015-11-15

Purpose: To accurately and efficiently reconstruct a continuous surface from noisy point clouds captured by a surface photogrammetry system (VisionRT). Methods: The authors have developed a level-set based surface reconstruction method on point clouds captured by a surface photogrammetry system (VisionRT). The proposed method reconstructs an implicit and continuous representation of the underlying patient surface by optimizing a regularized fitting energy, offering extra robustness to noise and missing measurements. By contrast to explicit/discrete meshing-type schemes, their continuous representation is particularly advantageous for subsequent surface registration and motion tracking by eliminating the need for maintaining explicit point correspondences as in discretemore » models. The authors solve the proposed method with an efficient narrowband evolving scheme. The authors evaluated the proposed method on both phantom and human subject data with two sets of complementary experiments. In the first set of experiment, the authors generated a series of surfaces each with different black patches placed on one chest phantom. The resulting VisionRT measurements from the patched area had different degree of noise and missing levels, since VisionRT has difficulties in detecting dark surfaces. The authors applied the proposed method to point clouds acquired under these different configurations, and quantitatively evaluated reconstructed surfaces by comparing against a high-quality reference surface with respect to root mean squared error (RMSE). In the second set of experiment, the authors applied their method to 100 clinical point clouds acquired from one human subject. In the absence of ground-truth, the authors qualitatively validated reconstructed surfaces by comparing the local geometry, specifically mean curvature distributions, against that of the surface extracted from a high-quality CT obtained from the same patient. Results: On phantom point clouds, their method achieved submillimeter reconstruction RMSE under different configurations, demonstrating quantitatively the faith of the proposed method in preserving local structural properties of the underlying surface in the presence of noise and missing measurements, and its robustness toward variations of such characteristics. On point clouds from the human subject, the proposed method successfully reconstructed all patient surfaces, filling regions where raw point coordinate readings were missing. Within two comparable regions of interest in the chest area, similar mean curvature distributions were acquired from both their reconstructed surface and CT surface, with mean and standard deviation of (μ{sub recon} = − 2.7 × 10{sup −3} mm{sup −1}, σ{sub recon} = 7.0 × 10{sup −3} mm{sup −1}) and (μ{sub CT} = − 2.5 × 10{sup −3} mm{sup −1}, σ{sub CT} = 5.3 × 10{sup −3} mm{sup −1}), respectively. The agreement of local geometry properties between the reconstructed surfaces and the CT surface demonstrated the ability of the proposed method in faithfully representing the underlying patient surface. Conclusions: The authors have integrated and developed an accurate level-set based continuous surface reconstruction method on point clouds acquired by a 3D surface photogrammetry system. The proposed method has generated a continuous representation of the underlying phantom and patient surfaces with good robustness against noise and missing measurements. It serves as an important first step for further development of motion tracking methods during radiotherapy.« less

A continuous surface reconstruction method on point cloud captured from a 3D surface photogrammetry system

PubMed Central

Liu, Wenyang; Cheung, Yam; Sabouri, Pouya; Arai, Tatsuya J.; Sawant, Amit; Ruan, Dan

2015-01-01

Purpose: To accurately and efficiently reconstruct a continuous surface from noisy point clouds captured by a surface photogrammetry system (VisionRT). Methods: The authors have developed a level-set based surface reconstruction method on point clouds captured by a surface photogrammetry system (VisionRT). The proposed method reconstructs an implicit and continuous representation of the underlying patient surface by optimizing a regularized fitting energy, offering extra robustness to noise and missing measurements. By contrast to explicit/discrete meshing-type schemes, their continuous representation is particularly advantageous for subsequent surface registration and motion tracking by eliminating the need for maintaining explicit point correspondences as in discrete models. The authors solve the proposed method with an efficient narrowband evolving scheme. The authors evaluated the proposed method on both phantom and human subject data with two sets of complementary experiments. In the first set of experiment, the authors generated a series of surfaces each with different black patches placed on one chest phantom. The resulting VisionRT measurements from the patched area had different degree of noise and missing levels, since VisionRT has difficulties in detecting dark surfaces. The authors applied the proposed method to point clouds acquired under these different configurations, and quantitatively evaluated reconstructed surfaces by comparing against a high-quality reference surface with respect to root mean squared error (RMSE). In the second set of experiment, the authors applied their method to 100 clinical point clouds acquired from one human subject. In the absence of ground-truth, the authors qualitatively validated reconstructed surfaces by comparing the local geometry, specifically mean curvature distributions, against that of the surface extracted from a high-quality CT obtained from the same patient. Results: On phantom point clouds, their method achieved submillimeter reconstruction RMSE under different configurations, demonstrating quantitatively the faith of the proposed method in preserving local structural properties of the underlying surface in the presence of noise and missing measurements, and its robustness toward variations of such characteristics. On point clouds from the human subject, the proposed method successfully reconstructed all patient surfaces, filling regions where raw point coordinate readings were missing. Within two comparable regions of interest in the chest area, similar mean curvature distributions were acquired from both their reconstructed surface and CT surface, with mean and standard deviation of (μrecon = − 2.7 × 10−3 mm−1, σrecon = 7.0 × 10−3 mm−1) and (μCT = − 2.5 × 10−3 mm−1, σCT = 5.3 × 10−3 mm−1), respectively. The agreement of local geometry properties between the reconstructed surfaces and the CT surface demonstrated the ability of the proposed method in faithfully representing the underlying patient surface. Conclusions: The authors have integrated and developed an accurate level-set based continuous surface reconstruction method on point clouds acquired by a 3D surface photogrammetry system. The proposed method has generated a continuous representation of the underlying phantom and patient surfaces with good robustness against noise and missing measurements. It serves as an important first step for further development of motion tracking methods during radiotherapy. PMID:26520747

What we learn from eclipsing binaries in the ultraviolet

NASA Technical Reports Server (NTRS)

Guinan, Edward F.

1990-01-01

Recent results on stars and stellar physics from IUE (International Ultraviolet Explorer) observations of eclipsing binaries are discussed. Several case studies are presented, including V 444 Cyg, Aur stars, V 471 Tau and AR Lac. Topics include stellar winds and mass loss, stellar atmospheres, stellar dynamos, and surface activity. Studies of binary star dynamics and evolution are discussed. The progress made with IUE in understanding the complex dynamical and evolutionary processes taking place in W UMa-type binaries and Algol systems is highlighted. The initial results of intensive studies of the W UMa star VW Cep and three representative Algol-type binaries (in different stages of evolution) focused on gas flows and accretion, are included. The future prospects of eclipsing binary research are explored. Remaining problems are surveyed and the next challenges are presented. The roles that eclipsing binaries could play in studies of stellar evolution, cluster dynamics, galactic structure, mass luminosity relations for extra galactic systems, cosmology, and even possible detection of extra solar system planets using eclipsing binaries are discussed.

Applications of PTTI to new techniques for determining crustal movements, polar motion, and the rotation of the earth

NASA Technical Reports Server (NTRS)

Bender, P. L.

1974-01-01

New extra-terrestrial techniques are discussed for geodesy and geodynamics include laser range measurements to the moon or to artificial satellites, Doppler measurements with the Transit satellite system, and both independent-clock and linked-antenna microwave interferometry. The ways in which PTTI measurements are used in these techniques will be reviewed, and the accuracies expected during the latter half of the 1970's will be discussed. At least 3 of the techniques appear capable of giving accuracies of 5 cm or better in each coordinate for many points on the earth's surface, and comparable accuracies for the earth's rotation and polar motion. For fixed stations or for sites a few hundred km apart, baseline lengths accurate to 1 cm may be achieved. Ways in which the complementary aspects of the different techniques can be exploited will be discussed, as well as how they tie in with improved ground techniques for determining crustal movements. Some recent results from the extra-terrestrial methods will be mentioned.

A novel electrochemical ion exchange system and its application in water treatment.

PubMed

Li, Yansheng; Li, Yongbin; Liu, Zhigang; Wu, Tao; Tian, Ying

2011-06-01

A novel electrochemical ion exchange system with porous cylinder electrodes is proposed for treatment of wastewater. This system can be used for desalination without the costly ion-exchange membrane and extra chemical reagents. Since the electrodes are completely uniform and no ion-exchange membrane was used in this system, it can be operated by switching anodes and cathodes flexibly for eliminating the scaling on the surface of electrodes. The strong base ion-exchange resin grains placed among the anode and cathode have played as supporting electrolyte, which is capable for the treatment of wastewater with low conductivity. The concentrated and neutralized anolyte containing chlorine is effective for disinfection and contaminants removal. Under the experimental conditions, the removal percentage of total dissolved salts was 83% and the removal percentage of chemical oxygen demand was 92% without consumption of extra chemical reagents. Copyright © 2011 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

The status of modern five-dimensional gravity (A short review: Why physics needs the fifth dimension)

NASA Astrophysics Data System (ADS)

Wesson, Paul S.

2015-11-01

Recent criticism of higher-dimensional extensions of Einstein's theory is considered. This may have some justification in regard to string theory, but is misguided as applied to five-dimensional (5D) theories with a large extra dimension. Such theories smoothly embed general relativity, ensuring recovery of the latter's observational support. When the embedding of spacetime is carried out in accordance with Campbell's theorem, the resulting 5D theory naturally explains the origin of classical matter and vacuum energy. Also, constraints on the equations of motion near a high-energy surface or membrane in the 5D manifold lead to quantization and quantum uncertainty. These are major returns on the modest investment of one extra dimension. Instead of fruitless bickering about whether it is possible to "see" the fifth dimension, it is suggested that it be treated on par with other concepts of physics, such as time. The main criterion for the acceptance of a fifth dimension (or not) should be its usefulness.

Measurement of steep aspheric surfaces using improved two-wavelength phase-shifting interferometer

NASA Astrophysics Data System (ADS)

Zhang, Liqiong; Wang, Shaopu; Hu, Yao; Hao, Qun

2017-10-01

Optical components with aspheric surfaces can improve the imaging quality of optical systems, and also provide extra advantages such as lighter weight, smaller volume and simper structure. In order to satisfy these performance requirements, the surface error of aspheric surfaces, especially high departure aspheric surfaces must be measured accurately and conveniently. The major obstacle of traditional null-interferometry for aspheric surface under test is that specific and complex null optics need to be designed to fully compensate for the normal aberration of the aspheric surface under test. However, non-null interferometry partially compensating for the aspheric normal aberration can test aspheric surfaces without specific null optics. In this work, a novel non-null test approach of measuring the deviation between aspheric surfaces and the best reference sphere by using improved two-wavelength phase shifting interferometer is described. With the help of the calibration based on reverse iteration optimization, we can effectively remove the retrace error and thus improve the accuracy. Simulation results demonstrate that this method can measure the aspheric surface with the departure of over tens of microns from the best reference sphere, which introduces approximately 500λ of wavefront aberration at the detector.

Structure and Formation of Elliptical and Spheroidal Galaxies

NASA Astrophysics Data System (ADS)

Kormendy, John; Fisher, David B.; Cornell, Mark E.; Bender, Ralf

2009-05-01

New surface photometry of all known elliptical galaxies in the Virgo cluster is combined with published data to derive composite profiles of brightness, ellipticity, position angle, isophote shape, and color over large radius ranges. These provide enough leverage to show that Sérsic log I vprop r 1/n functions fit the brightness profiles I(r) of nearly all ellipticals remarkably well over large dynamic ranges. Therefore, we can confidently identify departures from these profiles that are diagnostic of galaxy formation. Two kinds of departures are seen at small radii. All 10 of our ellipticals with total absolute magnitudes MVT <= -21.66 have cuspy cores—"missing light"—at small radii. Cores are well known and naturally scoured by binary black holes (BHs) formed in dissipationless ("dry") mergers. All 17 ellipticals with -21.54 <= MVT <= -15.53 do not have cores. We find a new distinct component in these galaxies: all coreless ellipticals in our sample have extra light at the center above the inward extrapolation of the outer Sérsic profile. In large ellipticals, the excess light is spatially resolved and resembles the central components predicted in numerical simulations of mergers of galaxies that contain gas. In the simulations, the gas dissipates, falls toward the center, undergoes a starburst, and builds a compact stellar component that, as in our observations, is distinct from the Sérsic-function main body of the elliptical. But ellipticals with extra light also contain supermassive BHs. We suggest that the starburst has swamped core scouring by binary BHs. That is, we interpret extra light components as a signature of formation in dissipative ("wet") mergers. Besides extra light, we find three new aspects to the ("E-E") dichotomy into two types of elliptical galaxies. Core galaxies are known to be slowly rotating, to have relatively anisotropic velocity distributions, and to have boxy isophotes. We show that they have Sérsic indices n > 4 uncorrelated with MVT . They also are α-element enhanced, implying short star-formation timescales. And their stellar populations have a variety of ages but mostly are very old. Extra light ellipticals generally rotate rapidly, are more isotropic than core Es, and have disky isophotes. We show that they have n sime 3 ± 1 almost uncorrelated with MVT and younger and less α-enhanced stellar populations. These are new clues to galaxy formation. We suggest that extra light ellipticals got their low Sérsic indices by forming in relatively few binary mergers, whereas giant ellipticals have n > 4 because they formed in larger numbers of mergers of more galaxies at once plus later heating during hierarchical clustering. We confirm that core Es contain X-ray-emitting gas whereas extra light Es generally do not. This leads us to suggest why the E-E dichotomy arose. If energy feedback from active galactic nuclei (AGNs) requires a "working surface" of hot gas, then this is present in core galaxies but absent in extra light galaxies. We suggest that AGN energy feedback is a strong function of galaxy mass: it is weak enough in small Es not to prevent merger starbursts but strong enough in giant Es and their progenitors to make dry mergers dry and to protect old stellar populations from late star formation. Finally, we verify that there is a strong dichotomy between elliptical and spheroidal galaxies. Their properties are consistent with our understanding of their different formation processes: mergers for ellipticals and conversion of late-type galaxies into spheroidals by environmental effects and by energy feedback from supernovae. In an appendix, we develop machinery to get realistic error estimates for Sérsic parameters even when they are strongly coupled. And we discuss photometric dynamic ranges necessary to get robust results from Sérsic fits. Based in part on observations obtained with the Hobby-Eberly Telescope (HET), which is a joint project of the University of Texas at Austin, the Pennsylvania State University, Stanford University, Ludwig-Maximilians-Universität München, and Georg-August-Universität Göttingen.

Deformation and stability of surface states in Dirac semimetals

NASA Astrophysics Data System (ADS)

Kargarian, Mehdi; Lu, Yuan-Ming; Randeria, Mohit

2018-04-01

The unusual surface states of topological semimetals have attracted a lot of attention. Recently, we showed [Proc. Natl. Acad. Sci. USA 113, 8648 (2016), 10.1073/pnas.1524787113] that for a Dirac semimetal (DSM) arising from band inversion, such as Na3Bi and Cd3As2 , the expected double Fermi arcs on the surface are not topologically protected. Quite generally, the arcs deform into states similar to those on the surface of a strong topological insulator. Here we address two questions related to deformation and stability of surface states in DSMs. First, we discuss why certain perturbations, no matter how large, are unable to destroy the double Fermi arcs. We show that this is related to a certain extra (particle-hole) symmetry, which is nongeneric in materials. Second, we discuss situations in which the surface states are completely destroyed without breaking any symmetry or impacting the bulk Dirac nodes. We are not aware of any experimental or density functional theory (DFT) candidates for a material which is a bulk DSM without any surface states, but our results clearly show that this is possible.

Numerical modelling of needle-grid electrodes for negative surface corona charging system

NASA Astrophysics Data System (ADS)

Zhuang, Y.; Chen, G.; Rotaru, M.

2011-08-01

Surface potential decay measurement is a simple and low cost tool to examine electrical properties of insulation materials. During the corona charging stage, a needle-grid electrodes system is often used to achieve uniform charge distribution on the surface of the sample. In this paper, a model using COMSOL Multiphysics has been developed to simulate the gas discharge. A well-known hydrodynamic drift-diffusion model was used. The model consists of a set of continuity equations accounting for the movement, generation and loss of charge carriers (electrons, positive and negative ions) coupled with Poisson's equation to take into account the effect of space and surface charges on the electric field. Four models with the grid electrode in different positions and several mesh sizes are compared with a model that only has the needle electrode. The results for impulse current and surface charge density on the sample clearly show the effect of the extra grid electrode with various positions.

The Minimum-Mass Surface Density of the Solar Nebula using the Disk Evolution Equation

NASA Technical Reports Server (NTRS)

Davis, Sanford S.

2005-01-01

The Hayashi minimum-mass power law representation of the pre-solar nebula (Hayashi 1981, Prog. Theo. Phys.70,35) is revisited using analytic solutions of the disk evolution equation. A new cumulative-planetary-mass-model (an integrated form of the surface density) is shown to predict a smoother surface density compared with methods based on direct estimates of surface density from planetary data. First, a best-fit transcendental function is applied directly to the cumulative planetary mass data with the surface density obtained by direct differentiation. Next a solution to the time-dependent disk evolution equation is parametrically adapted to the planetary data. The latter model indicates a decay rate of r -1/2 in the inner disk followed by a rapid decay which results in a sharper outer boundary than predicted by the minimum mass model. The model is shown to be a good approximation to the finite-size early Solar Nebula and by extension to extra solar protoplanetary disks.

The over-optimistic portrayal of life-supporting treatments in newspapers and on the Internet: a cross-sectional study using extra-corporeal membrane oxygenation as an example.

PubMed

Chen, Yen-Yuan; Chen, Likwang; Kao, Yu-Hui; Chu, Tzong-Shinn; Huang, Tien-Shang; Ko, Wen-Je

2014-08-01

Extra-corporeal membrane oxygenation has been introduced to clinical practice for several decades. It is unclear how internet and newspapers portray the use of extra-corporeal membrane oxygenation. This study were: (1) to quantify the coverage of extra-corporeal membrane oxygenation use in newspapers and on the Internet; (2) to describe the characteristics of extra-corporeal membrane oxygenation users presented in newspaper articles and the Internet web pages in comparison with those shown in extra-corporeal membrane oxygenation studies in Taiwan; and (3) to examine the survival rates of extra-corporeal membrane oxygenation users presented in newspaper articles and the Internet web pages in comparison with those in Taiwan and in the Extracorporeal Life Support Registry Report International Summary for January 2014. All issues of Taiwan's four major newspapers from 2006 to 2010 were reviewed. In October 2011, a search of Internet web pages was performed based on the subjects of "yeh-ko-mo" (extra-corporeal membrane oxygenation in Traditional Chinese), "ECMO", and "extra-corporeal membrane oxygenation." All the Internet web pages and newspaper articles recounting the use of extra-corporeal membrane oxygenation were reviewed. The information, such as patient characteristic and the status at hospital discharge, was collected. The survival rate of extra-corporeal membrane oxygenation use shown on the Internet (83.97%) was significantly higher than all the survival rates reported in Taiwan's literature (p < .01) and in the Extracorporeal Life Support Registry Report International Summary for January 2014 (p < .01). In addition, the survival rate of extra-corporeal membrane oxygenation use shown in newspapers (61.54%) was significantly higher than the average survival rate (43%) reported in Taiwan's literature, the pediatric average survival rate (51%), and the adult average survival rate (47%) in the Extracorporeal Life Support Registry Report International Summary for January 2014. Internet and newspapers both showed over-optimistic survival to hospital discharge for patients sustained by extra-corporeal membrane oxygenation. Internet was more likely to provide optimistic information for aggressive life-supporting treatments such as extra-corporeal membrane oxygenation than newspapers as indicated by survival to hospital discharge.

76 FR 28461 - Program Year 2011 Allotments and Grants: Workforce Investment Act, Wagner-Peyser Act, and...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-17

..., services for groups with special needs, and for the extra costs of exemplary models for delivering job... for Guam and the Virgin Islands. The remaining funds are distributed to the States with 40 percent...) -0.20 Virgin Islands 1,385,855 1,383,083 (2,772) -0.20 Outlying areas total....... 1,715,074 1,711...

A Preliminary Investigation of the Effect of Acute Alcohol on Dopamine Transmission as Assessed by [11 C]-(+)-PHNO.

PubMed

Thiruchselvam, Thulasi; Wilson, Alan A; Boileau, Isabelle; Le Foll, Bernard

2017-06-01

Previous positron emission tomography (PET) studies exploring the effect of acute alcohol on dopamine (DA) levels have yielded inconsistent results, with only some studies suggesting increased synaptic DA levels after an alcohol challenge. The D 2 /D 3 agonist radiotracer, [ 11 C]-(+)-propyl-hexahydro-naphtho-oxazin ([ 11 C]-(+)-PHNO), has greater sensitivity to synaptic DA fluctuation than previously used antagonist radiotracers and is in principle more suitable for imaging alcohol-induced changes in DA. Its high affinity for the D 3 receptor also enables measuring changes in D 3 -rich brain areas which have previously been unexplored. The aim of this study was to investigate whether alcohol reduces [ 11 C]-(+)-PHNO binding in the striatum and in D 3 -rich extra-striatal areas. Eight healthy drinkers underwent 2 [ 11 C]-(+)-PHNO PET scans following alcohol and placebo in a randomized, single-blind, crossover design. [ 11 C]-(+)-PHNO binding in the striatum and in the extra-striatal regions were compared between the 2 scans. Acute alcohol administration did not significantly reduce [ 11 C]-(+)-PHNO binding in either the limbic striatum (d = 0.64), associative striatum (d < 0.20), or the sensorimotor striatum (d < 0.15). Similarly, there were no changes in binding in the D 3 -rich areas of the ventral pallidum (d = 0.53), substantia nigra (d < 0.15), or globus pallidus (d < 0.15). However, greater percent change in [ 11 C]-(+)-PHNO binding (ΔBP ND ) between scans was related to lower blood alcohol levels. Using the agonist radiotracer, [ 11 C]-(+)-PHNO, our preliminary findings suggest that alcohol is not associated with robust changes in tracer binding in striatal or extra-striatal regions. However, we found that changes in [ 11 C]-(+)-PHNO binding following alcohol are dependent on blood alcohol levels suggesting that increases in DA may occur at lower stimulating doses. The effect of lower doses of alcohol on DA warrants further investigation in a larger study. Copyright © 2017 by the Research Society on Alcoholism.

SPARKy - Spring Ankle with Regenerative Kinetics to Build a New Generation of Transtibial Prostheses

DTIC Science & Technology

2010-07-01

walking on inclines/declines, and ascending/descending stairs We are able to walk continuously over ground and can walk up and down slopes and... stairs . Walking up a slope and ascending stairs needs to be improved, adding extra propulsion. The propulsion walking down stairs needs to be...bodied subjects walking on flat even surfaces, inclines/declines, and ascending/descending stairs – In Process 4. Using able bodied test data, a

Primary Education in Vietnam: Extra Classes and Outcomes

ERIC Educational Resources Information Center

Ha, Tran Thu; Harpham, Trudy

2005-01-01

Extra classes are increasingly observed in both developed and developing countries. In Vietnam, a country where education reforms are at their height, extra classes are proliferating and have become a concern to society and the government. Although the government has banned extra classes that are independent of school administration, teachers…

23 CFR 635.120 - Changes and extra work.

Code of Federal Regulations, 2010 CFR

2010-04-01

... CONSTRUCTION AND MAINTENANCE Contract Procedures § 635.120 Changes and extra work. (a) Following authorization to proceed with a project, all major changes in the plans and contract provisions and all major extra... to what constitutes a non-major change and non-major extra work. (c) Changes in contract time, as...

Sensitivity of Methane Lifetime and Transport to Sulfate Geoengineering

NASA Astrophysics Data System (ADS)

Aquila, V.; Pitari, G.; Tilmes, S.; Cionni, I.; de Luca, N.; Di Genova, G.; Iachetti, D.

2014-12-01

Sulfate geoengineering, made by sustained injection of SO2 in the tropical lower stratosphere, may impact the abundance of tropospheric methane through several photochemical mechanisms affecting the tropospheric OH abundance and hence the methane lifetime. Changes of the stratospheric Brewer-Dobson circulation also play a role in the upper tropospheric CH4 transport. Three mechanisms lead to lower OH concentrations and a longer CH4 lifetime: (a) solar radiation scattering increases the planetary albedo and cools the surface, with a tropospheric water vapor decrease as a response to this cooling. (b) The tropospheric UV budget is upset by the additional aerosol scattering and stratospheric ozone changes: the net effect is meridionally not uniform, with a net decrease in the tropics, thus producing less tropospheric O(1D). (c) The extra-tropical downwelling motion from the lower stratosphere tends to increase the sulfate aerosol surface area density available for heterogeneous chemical reactions in the mid-upper troposphere, thus reducing the amount of NOx and tropospheric O3 production. On the other hand, the tropical lower stratosphere is warmed by solar and planetary radiation absorption by the aerosols. The heating rates perturbation are strongly latitude dependent, producing a significant change of the pole-to-equator temperature gradient and mean zonal wind distribution, with a net increase of tropical upwelling. A stronger meridional component of the Brewer-Dobson circulation increases the extra-tropical stratosphere to troposphere transport of CH4 poorer air, resulting in less CH4 transported in the UTLS. The net effect on tropospheric OH may be positive or negative depending on the net result of different superimposed species perturbations in the UTLS, i.e. CH4 (negative), NOy and O3 (positive). Three climate-chemistry coupled models are used here to explore the above radiative, chemical and dynamical mechanisms affecting the methane lifetime (ULAQ-CCM, GEOSCCM, CCSM-CAM4). First results show that the CH4 lifetime may become significantly longer (by about 10%) with a sustained injection of 2.5 Tg-S/yr started in year 2020, which implies an increase of tropospheric CH4 (200 ppbv) and a positive indirect radiative forcing of sulfate geoengineering due to CH4 changes (+0.1 W/m2 in the 2045).

Evaluation of Potential Test Environments for Assessing the Impact of Multi-Sensor Data Fusion on Command and Control Operations in the HALIFAX Class Frigate

DTIC Science & Technology

2001-05-01

specifying the gaming area and land masses , the meteorological and ocean environments, and the sea conditions that exist within the gaming area. Unlike...exchanges 1.12. Customise env1ronment for data collection 1.12.1. Extra audio and v1deo 1.12.2. Add on software modules 1.13. Standalone keypads...State boards No, could be added Manuals I Charts IT acpacs I Post its I etc. No, could be added 1.11 Customise environment for data collection Ability

Polarimetric SAR Models for Oil Fields Monitoring in China Seas

NASA Astrophysics Data System (ADS)

Buono, A.; Nunziata, F.; Li, X.; Wei, Y.; Ding, X.

2014-11-01

In this study, physical-based models for polarimetric Synthetic Aperture Radar (SAR) oil fields monitoring are proposed. They all share a physical rationale relying on the different scattering mechanisms that characterize a free sea surface, an oil slick-covered sea surface, and a metallic target. In fact, sea surface scattering is well modeled by a Bragg-like behaviour, while a strong departure from Bragg scattering is in place when dealing with oil slicks and targets. Furthermore, the proposed polarimetric models aim at addressing simultaneously target and oil slick detection, providing useful extra information with respect to single-pol SAR data in order to approach oil discrimination and classification. Experiments undertaken over East and South China Sea from actual C-band RadarSAT-2 full-pol SAR data witness the soundness of the proposed rationale.

Polarimetric SAR Models for Oil Fields Monitoring in China Seas

NASA Astrophysics Data System (ADS)

Buono, A.; Nunziata, F.; Li, X.; Wei, Y.; Ding, X.

2014-11-01

In this study, physical-based models for polarimetric Synthetic Aperture Radar (SAR) oil fields monitoring are proposed. They all share a physical rationale relying on the different scattering mechanisms that characterize a free sea surface, an oil slick-covered sea surface, and a metallic target. In fact, sea surface scattering is well modeled by a Bragg-like behaviour, while a strong departure from Bragg scattering is in place when dealing with oil slicks and targets. Furthermore, the proposed polarimetric models aim at addressing simultaneously target and oil slick detection, providing useful extra information with respect to single-pol SAR data in order to approach oil discrimination and classification.Experiments undertaken over East and South China Sea from actual C-band RadarSAT-2 full-pol SAR data witness the soundness of the proposed rationale.

Modification of Soil Temperature and Moisture Budgets by Snow Processes

NASA Astrophysics Data System (ADS)

Feng, X.; Houser, P.

2006-12-01

Snow cover significantly influences the land surface energy and surface moisture budgets. Snow thermally insulates the soil column from large and rapid temperature fluctuations, and snow melting provides an important source for surface runoff and soil moisture. Therefore, it is important to accurately understand and predict the energy and moisture exchange between surface and subsurface associated with snow accumulation and ablation. The objective of this study is to understand the impact of land surface model soil layering treatment on the realistic simulation of soil temperature and soil moisture. We seek to understand how many soil layers are required to fully take into account soil thermodynamic properties and hydrological process while also honoring efficient calculation and inexpensive computation? This work attempts to address this question using field measurements from the Cold Land Processes Field Experiment (CLPX). In addition, to gain a better understanding of surface heat and surface moisture transfer process between land surface and deep soil involved in snow processes, numerical simulations were performed at several Meso-Cell Study Areas (MSAs) of CLPX using the Center for Ocean-Land-Atmosphere (COLA) Simplified Version of the Simple Biosphere Model (SSiB). Measurements of soil temperature and soil moisture were analyzed at several CLPX sites with different vegetation and soil features. The monthly mean vertical profile of soil temperature during October 2002 to July 2003 at North Park Illinois River exhibits a large near surface variation (<5 cm), reveals a significant transition zone from 5 cm to 25 cm, and becomes uniform beyond 25cm. This result shows us that three soil layers are reasonable in solving the vertical variation of soil temperature at these study sites. With 6 soil layers, SSiB also captures the vertical variation of soil temperature during entire winter season, featuring with six soil layers, but the bare soil temperature is underestimated and root-zone soil temperature is overestimated during snow melting; which leads to overestimated temperature variations down to 20 cm. This is caused by extra heat loss from upper soil level and insufficient heat transport from the deep soil. Further work will need to verify if soil temperature displays similar vertical thermal structure for different vegetation and soil types during snow season. This study provides insight to the surface and subsurface thermodynamic and hydrological processes involved in snow modeling which is important for accurate snow simulation.

[Correlations between features of social network and outcomes in those suffering from schizophrenia seven years from the first hospitalisation].

PubMed

Cechnicki, Andrzej; Wojciechowska, Anna

2007-01-01

A research had been conducted upon the correlations between selected parameters of social networks of 64 patients ill with schizophrenia who were diagnosed according to DSM-III, and the aims of treatment such as: motivation to receive treatment, insight, compliance in taking medication, satisfaction with treatment, and treatment outcomes in the area of clinical and social functioning as well as family functioning seven years after the first admission. The indices of social networks were studied with Bizon's questionnaire. It serves storing of data on persons who have supportive functions as well as allows to work out characteristic properties of the support system such as: range of the network, size of the extra-familial network, level and localisation of the support, network and support system age. A compound system of social support and large social network, with a high level of support, correlate in a beneficial way with higher subjective satisfaction with treatment. Whereas a large extra-familial network with high level of support, correlates with better insight into illness. The larger the social network was (its range to be precise), including extra-familial network and the high level of incoming support, the fewer positive and negative symptoms the patients had and much more remissions appeared then. The larger network's range correlates with smaller number of relapses and global time of being hospitalised. People with a larger network, with high level of support located in family and outside the family, have been rarely hospitalised. The connection between network's parameters and number of daily hospitalisations had been rated. People with a larger network, including extra-familial network, with high level of social support function better in the society didn't become regressive in their professional lives and they have smaller burden in their family life. The high level of social support correlates with better family function. In families of people ill with schizophrenia having larger extra-familial network with a high level of support there is less deterioration and disintegration, criticism and rejection.

Quantifying inbreeding avoidance through extra-pair reproduction

PubMed Central

Reid, Jane M; Arcese, Peter; Keller, Lukas F; Germain, Ryan R; Duthie, A Bradley; Losdat, Sylvain; Wolak, Matthew E; Nietlisbach, Pirmin

2015-01-01

Extra-pair reproduction is widely hypothesized to allow females to avoid inbreeding with related socially paired males. Consequently, numerous field studies have tested the key predictions that extra-pair offspring are less inbred than females’ alternative within-pair offspring, and that the probability of extra-pair reproduction increases with a female's relatedness to her socially paired male. However, such studies rarely measure inbreeding or relatedness sufficiently precisely to detect subtle effects, or consider biases stemming from failure to observe inbred offspring that die during early development. Analyses of multigenerational song sparrow (Melospiza melodia) pedigree data showed that most females had opportunity to increase or decrease the coefficient of inbreeding of their offspring through extra-pair reproduction with neighboring males. In practice, observed extra-pair offspring had lower inbreeding coefficients than females’ within-pair offspring on average, while the probability of extra-pair reproduction increased substantially with the coefficient of kinship between a female and her socially paired male. However, simulations showed that such effects could simply reflect bias stemming from inbreeding depression in early offspring survival. The null hypothesis that extra-pair reproduction is random with respect to kinship therefore cannot be definitively rejected in song sparrows, and existing general evidence that females avoid inbreeding through extra-pair reproduction requires reevaluation given such biases. PMID:25346331

Heritability of female extra-pair paternity rate in song sparrows (Melospiza melodia)

PubMed Central

Reid, Jane M.; Arcese, Peter; Sardell, Rebecca J.; Keller, Lukas F.

2011-01-01

The forces driving the evolution of extra-pair reproduction in socially monogamous animals remain widely debated and unresolved. One key hypothesis is that female extra-pair reproduction evolves through indirect genetic benefits, reflecting increased additive genetic value of extra-pair offspring. Such evolution requires that a female's propensity to produce offspring that are sired by an extra-pair male is heritable. However, additive genetic variance and heritability in female extra-pair paternity (EPP) rate have not been quantified, precluding accurate estimation of the force of indirect selection. Sixteen years of comprehensive paternity and pedigree data from socially monogamous but genetically polygynandrous song sparrows (Melospiza melodia) showed significant additive genetic variance and heritability in the proportion of a female's offspring that was sired by an extra-pair male, constituting major components of the genetic architecture required for extra-pair reproduction to evolve through indirect additive genetic benefits. However, estimated heritabilities were moderately small (0.12 and 0.18 on the observed and underlying latent scales, respectively). The force of selection on extra-pair reproduction through indirect additive genetic benefits may consequently be relatively weak. However, the additive genetic variance and non-zero heritability observed in female EPP rate allow for multiple further genetic mechanisms to drive and constrain mating system evolution. PMID:20980302

The over-optimistic portrayal of life-supporting treatments in newspapers and on the Internet: a cross-sectional study using extra-corporeal membrane oxygenation as an example

PubMed Central

2014-01-01

Background Extra-corporeal membrane oxygenation has been introduced to clinical practice for several decades. It is unclear how internet and newspapers portray the use of extra-corporeal membrane oxygenation. This study were: (1) to quantify the coverage of extra-corporeal membrane oxygenation use in newspapers and on the Internet; (2) to describe the characteristics of extra-corporeal membrane oxygenation users presented in newspaper articles and the Internet web pages in comparison with those shown in extra-corporeal membrane oxygenation studies in Taiwan; and (3) to examine the survival rates of extra-corporeal membrane oxygenation users presented in newspaper articles and the Internet web pages in comparison with those in Taiwan and in the Extracorporeal Life Support Registry Report International Summary for January 2014. Methods All issues of Taiwan’s four major newspapers from 2006 to 2010 were reviewed. In October 2011, a search of Internet web pages was performed based on the subjects of “yeh-ko-mo” (extra-corporeal membrane oxygenation in Traditional Chinese), “ECMO”, and “extra-corporeal membrane oxygenation.” All the Internet web pages and newspaper articles recounting the use of extra-corporeal membrane oxygenation were reviewed. The information, such as patient characteristic and the status at hospital discharge, was collected. Results The survival rate of extra-corporeal membrane oxygenation use shown on the Internet (83.97%) was significantly higher than all the survival rates reported in Taiwan’s literature (p < .01) and in the Extracorporeal Life Support Registry Report International Summary for January 2014 (p < .01). In addition, the survival rate of extra-corporeal membrane oxygenation use shown in newspapers (61.54%) was significantly higher than the average survival rate (43%) reported in Taiwan’s literature, the pediatric average survival rate (51%), and the adult average survival rate (47%) in the Extracorporeal Life Support Registry Report International Summary for January 2014. Conclusions Internet and newspapers both showed over-optimistic survival to hospital discharge for patients sustained by extra-corporeal membrane oxygenation. Internet was more likely to provide optimistic information for aggressive life-supporting treatments such as extra-corporeal membrane oxygenation than newspapers as indicated by survival to hospital discharge. PMID:25081491

Observational Effects of Magnetism in O Stars: Surface Nitrogen Abundances

NASA Technical Reports Server (NTRS)

Martins, F.; Escolano, C.; Wade, G. A.; Donati, J. F.; Bouret, J. C.

2011-01-01

Aims. We investigate the surface nitrogen content of the six magnetic O stars known to date as well as of the early B-type star Tau Sco.. We compare these abundances to predictions of evolutionary models to isolate the effects of magnetic field on the transport of elements in stellar interiors. Methods. We conduct a quantitative spectroscopic analysis of the ample stars with state-of-the-art atmosphere models. We rely on high signal-to-noise ratio, high resolution optical spectra obtained with ESPADONS at CFHT and NARVAL at TBL. Atmosphere models and synthetic spectra are computed with the code CMFGEN. Values of N/H together with their uncertainties are determined and compared to predictions of evolutionary models. Results. We find that the magnetic stars can be divided into two groups: one with stars displaying no N enrichment (one object); and one with stars most likely showing extra N enrichment (5 objects). For one star (Ori C) no robust conclusion can be drawn due to its young age. The star with no N enrichment is the one with the weakest magnetic field, possibly of dynamo origin. It might be a star having experienced strong magnetic braking under the condition of solid body rotation, but its rotational velocity is still relatively large. The five stars with high N content were probably slow rotators on the zero age main sequence, but they have surface N/H typical of normal O stars, indicating that the presence of a (probably fossil) magnetic field leads to extra enrichment. These stars may have a strong differential rotation inducing shear mixing. Our results shOuld be viewed as a basis on which new theoretical simulations can rely to better understand the effect of magnetism on the evolution of massive stars.

The Magnetic Properties Of Aggregate Polycrystalline Diamond: Implications For Carbonado Petrogenesis

NASA Technical Reports Server (NTRS)

Kleteschka, Gunther; Taylor, Patrick T.; Wasilewski, Peter J.; Hill, Hugh G. M.

2000-01-01

Carbonados are a type of diamond, which are made up of many aggregrates of small crystalline diamonds or microdiamonds. The term "carbonado" comes from the Portuguese word carbonated. They are only found in sedimentary deposits in the Central African Republic (CAR) and the Bahia Province of Brazil. They were once the source of the world's supply of industrial diamonds. Their origin is uncertain but several mutually exclusive hypotheses have been proposed. This theories are: (1) extraterrestrial, that is they formed from the dust cloud of original solar nebulae; (2) produced by the high temperatures and pressures of the Earth's mantle; (3) or as the result of an extra-terrestrial impact into a carbon rich layer of sediment. Our study was done to further the understanding of their origin. We measured the magnetic properties on some twenty samples from the CAR. An earlier study was done on whole samples of carbonados and the "common" or kimberlitic diamond. Our work differed in that we started at the surface and subsequently removed the surface layers (by days of acid immersion) into the interior; measuring the magnetic properties at each interval. This procedure permits us to monitor the distribution of magnetic substances within the samples. Our results showed that the magnetic carriers are distributed on the surface including the open pores and that the carbonado interior is essentially non-magnetic. This result suggests that the initial formation environment was deficient in magnetic particles. Such a situation could indicate that their formation was the result of an extra-terrestrial body impacting carbon-rich sediment. Obviously, more work will be required on isotopic and chemical analyses before a more detailed ori-in can be determined.

EFFECT OF AN ADDITIONAL HYDROPHILIC VERSUS HYDROPHOBIC COAT ON THE QUALITY OF DENTINAL SEALING PROVIDED BY TWO-STEP ETCH-AND-RINSE ADHESIVES

PubMed Central

Silva, Safira Marques de Andrade; Carrilho, Marcela Rocha de Oliveira; Marquezini, Luiz; Garcia, Fernanda Cristina Pimentel; Manso, Adriana Pigozzo; Alves, Marcelo Corrêa; de Carvalho, Ricardo Marins

2009-01-01

Objective: To test the hypothesis that the quality of the dentinal sealing provided by two-step etch-and-rinse adhesives cannot be altered by the addition of an extra layer of the respective adhesive or the application of a more hydrophobic, non-solvated resin. Material and Methods: full-crown preparations were acid-etched with phosphoric acid for 15 s and bonded with Adper Single Bond (3M ESPE), Excite DSC (Ivoclar/Vivadent) or Prime & Bond NT (Dentsply). The adhesives were used according to the manufacturers' instructions (control groups) or after application to dentin they were a) covered with an extra coat of each respective system or b) coated with a non-solvated bonding agent (Adper Scotchbond Multi-Purpose Adhesive, 3M ESPE). Fluid flow rate was measured before and after dentin surfaces were acid-etched and bonded with adhesives. Results: None of the adhesives or experimental treatments was capable to block completely the fluid transudation across the treated dentin. Application of an extra coat of the adhesive did not reduce the fluid flow rate of adhesive-bonded dentin (p>0.05). Conversely, the application of a more hydrophobic non-solvated resin resulted in significant reductions in the fluid flow rate (p<0.05) for all tested adhesives. Conclusions: The quality of the dentinal sealing provided by etch-and-rinse adhesives can be significantly improved by the application of a more hydrophobic, non-solvated bonding agent. PMID:19466248

Heavy and extra heavy hydrocarbons in Venezuela

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zamora, L.G.; Gallango, O.E.

1993-02-01

Most of Venezuela's giant accumulations of heavier thatn 22[degrees] API hydrocarbons, are located in the more stable flanks of the Maracaibo and Eastern Venezuela basins, at depths shallower than 2400 meters. The reservoir rocks are unconsolidated fluviodeltaic Neogene sands, transgressive over large regional Oligocene unconformities. There are also large volumes accumulated along the mountainous and more active flanks, either in Neogene alluvial sediments or in Cretaceous and older fractured rocks. These accumulations, located near present day erosion surfaces, are subjected to meteoric water influx. Extensive research carried out by the affiliates of Petroleos de Venezuela, S.A., and other institutions duringmore » the past ten years, has shown tha the main cause of degradation is the action of microorganisms brought in by meteoric water influx and, to less extent, the washing of lighter hydrocarbon fractions by either connate or meteric water. These studies have also shown that most of the heavy and extra-heavy hydrocarbons are the result of biodegradation of low maturity crudes generated from Cretaceous rocks, rich in marine organic matter, which started its generation during the Paleogene. The heavy and extra-heavy hydrocarbons, bitumen included, so far discovered in Venezuela, add up to 1.5 [times] 10[sup 12] bbl in place. This figure includes proved, probable and possible volumes, and the expectancy of additional hydrocarbons of this kind to be discovered yet is of 0.1 [times] 10[sup 12] bbl in place.« less

Egg-in-Cube: Design and Fabrication of a Novel Artificial Eggshell with Functionalized Surface

PubMed Central

Huang, Wenjing; Arai, Fumihito; Kawahara, Tomohiro

2015-01-01

An eggshell is a porous microstructure that regulates the passage of gases to allow respiration. The chick embryo and its circulatory system enclosed by the eggshell has become an important model for biomedical research such as the control of angiogenesis, cancer therapy, and drug delivery test, because the use of embryo is ethically acceptable and it is inexpensive and small. However, chick embryo and extra-embryonic blood vessels cannot be accessed freely and has poor observability because the eggshell is tough and cannot be seen through, which limits its application. In this study, a novel artificial eggshell with functionalized surface is proposed, which allows the total amount of oxygen to pass into the egg for the chick embryo culturing and has high observability and accessibility for embryo manipulation. First, a 40-mm enclosed cubic-shaped eggshell consisting of a membrane structure and a rigid frame structure is designed, and then the threshold of the membrane thickness suitable for the embryo survival is figured out according to the oxygen-permeability of the membrane structure. The designed artificial eggshell was actually fabricated by using polydimethylsiloxane (PDMS) and polycarbonate (PC) in the current study. Using the fabricated eggshell, chick embryo and extra-embryonic blood vessels can be observed from multiple directions. To test the effectiveness of the design, the cubic eggshells were used to culture chick embryos and survivability was confirmed when PDMS membranes with adequate oxygen permeability were used. Since the surface of the eggshell is transparent, chick embryo tissue development could be observed during the culture period. Additionally, the chick embryo tissues could be accessed and manipulated from outside the cubic eggshell, by using mechanical tools without breakage of the eggshell. The proposed “Egg-in-Cube” with functionalized surface has great potential to serve as a promising platform for biomedical research. PMID:25768929

46 CFR Sec. 8 - Extra work and changes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Extra work and changes. Sec. 8 Section 8 Shipping... Sec. 8 Extra work and changes. (a) At any time after the award of an original job order and during the time the work thereunder is being performed, additional or extra work or changes in the work covered by...

46 CFR Sec. 8 - Extra work and changes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 8 2011-10-01 2011-10-01 false Extra work and changes. Sec. 8 Section 8 Shipping... Sec. 8 Extra work and changes. (a) At any time after the award of an original job order and during the time the work thereunder is being performed, additional or extra work or changes in the work covered by...

Elliptic surface grid generation on minimal and parmetrized surfaces

NASA Technical Reports Server (NTRS)

Spekreijse, S. P.; Nijhuis, G. H.; Boerstoel, J. W.

1995-01-01

An elliptic grid generation method is presented which generates excellent boundary conforming grids in domains in 2D physical space. The method is based on the composition of an algebraic and elliptic transformation. The composite mapping obeys the familiar Poisson grid generation system with control functions specified by the algebraic transformation. New expressions are given for the control functions. Grid orthogonality at the boundary is achieved by modification of the algebraic transformation. It is shown that grid generation on a minimal surface in 3D physical space is in fact equivalent to grid generation in a domain in 2D physical space. A second elliptic grid generation method is presented which generates excellent boundary conforming grids on smooth surfaces. It is assumed that the surfaces are parametrized and that the grid only depends on the shape of the surface and is independent of the parametrization. Concerning surface modeling, it is shown that bicubic Hermite interpolation is an excellent method to generate a smooth surface which is passing through a given discrete set of control points. In contrast to bicubic spline interpolation, there is extra freedom to model the tangent and twist vectors such that spurious oscillations are prevented.

Educational Sorting and Residential Aspirations among Rural High School Students: What Are the Contributions of Schools and Educators to Rural Brain Drain?

ERIC Educational Resources Information Center

Petrin, Robert A.; Schafft, Kai A.; Meece, Judith L.

2014-01-01

An extended body of research has documented the outmigration of the "best and brightest" youth from rural areas. Some of this scholarship has suggested that rural schools and educators may be complicit in this process as they devote extra attention and resources to the highest achieving students--those most likely to leave their rural…

East Europe Report, Economic and Industrial Affairs

DTIC Science & Technology

1984-08-24

inclusion in the prices of extra overhead costs of monopolistic enterprises also have a distorting effect on prices (pp 97ff). Kopatsy is also right... price of petroleum has led to the reconsid- eration of the energy policy in all the petroleum- consuming countries, turning from the era of waste to...the tasks that face the Romanian exporters of petroleum equipment, by creating proper representations in areas and countries consuming such equipment

Extra-Territorial Siting of Nuclear Installations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shea, Thomas E.; Morris, Frederic A.

2009-10-07

Arrangements might be created for siting nuclear installations on land ceded by a host State for administration by an international or multinational organization. Such arrangements might prove useful in terms of resolving suspicions of proliferation in troubled areas of the world, or as a means to introduce nuclear activities into areas where political, financial or technical capabilities might otherwise make such activities unsound, or as a means to enable global solutions to be instituted for major nuclear concerns (e.g., spent fuel management). The paper examines practical matters associated with the legal and programmatic aspects of siting nuclear installations, including diplomatic/politicalmore » frameworks, engaging competent industrial bodies, protection against seizure, regulation to ensure safety and security, waste management, and conditions related to the dissolution of the extra-territorial provisions as may be agreed as the host State(s) achieve the capabilities to own and operate the installations. The paper considers the potential for using such a mechanism across the spectrum of nuclear power activities, from mining to geological repositories for nuclear waste. The paper considers the non-proliferation dimensions associated with such arrangements, and the pros and cons affecting potential host States, technology vendor States, regional neighbors and the international community. It considers in brief potential applications in several locations today.« less

Shape transitions during clathrin-induced endocytosis

NASA Astrophysics Data System (ADS)

Kumar, Gaurav; Sain, Anirban

2016-12-01

Endocytosis is among the most common transport mechanisms which cells employ to receive macromolecules, the so-called cargo, from its extra cellular environment. Clathrin-mediated endocytosis (CME), in particular, involves the cytoplasmic protein clathrin which induces formation and internalization of clathrin-coated membrane buds that contain extra-cellular cargo. Decades of experimental work have established that the morphology of the clathrin coat evolves with time and induces its curvature on the membrane bud; but energetics of the process remain unclear. Recent experiments by Avinoam et al. [Science 348, 1369 (2015), 10.1126/science.aaa9555] reported that the area of the clathrin coat remains fixed while its curvature increases with time and also the clathrin molecules in the coat turn over rapidly. We show that these observations challenge existing models of coated membrane bud formation. We analyze their data to bring out certain features consistent with the underlying lattice structure of the coat. We hypothesize that membrane curvature inhibits clathrin deposition and propose a kinetic model that explains the area distribution of clathrin coats. We also show that their data on shape evolution of the coated membrane bud can be approximately understood from simple geometric considerations. However, the energetics of the coat formation which controls the kinetics of the process remains a puzzle.

Trace element content and molecular biodiversity in the epiphytic moss Leptodon smithii: two independent tracers of human disturbance.

PubMed

Spagnuolo, Valeria; Terracciano, Stefano; Giordano, Simonetta

2009-03-01

This paper focuses on chemical composition of the epiphytic moss Leptodon smithii, gathered on Quercus ilex bark, assessed in seven sites located in urban and extra-urban/remote areas of southern Italy, a poorly surveyed geographic area. The concentrations of Cr, Cu, Pb and Zn in moss tissue are generally more abundant in moss gathered in the urban sites; among extra-urban/remote sites Valle delle Ferriere showed the highest metal concentrations, mostly related to an industrial activity occurred in the past. L. smithii chemistry seems influenced by airborne dust locally enhanced by erosion phenomena, long-range transport of pollutants and marine aerosols. Element content in moss is compared with genetic variability of L. smithii estimated in the same sites. Pearson's correlation coefficient between gene diversity and total element load (r=-0.851; p=0.03) suggests that anthropogenic pressure, determining habitat disturbance and fragmentation, leads both to genetic impoverishment consequent to population shrink, and to a higher accumulation in moss tissues, as a consequence of increased airborne major/trace elements. Thus, the coupled evaluation of chemical composition in mosses and gene diversity may prove a useful tool to highlight environmental disturbance in a gradient of land use.

Sliding GAIT Algorithm for the All-Terrain Hex-Limbed Extra-Terrestrial Explorer (ATHLETE)

NASA Technical Reports Server (NTRS)

Townsend, Julie; Biesiadecki, Jeffrey

2012-01-01

The design of a surface robotic system typically involves a trade between the traverse speed of a wheeled rover and the terrain-negotiating capabilities of a multi-legged walker. The ATHLETE mobility system, with both articulated limbs and wheels, is uniquely capable of both driving and walking, and has the flexibility to employ additional hybrid mobility modes. This paper introduces the Sliding Gait, an intermediate mobility algorithm faster than walking with better terrain-handling capabilities than wheeled mobility.

Surface stress mediated image force and torque on an edge dislocation

NASA Astrophysics Data System (ADS)

Raghavendra, R. M.; Divya, Iyer, Ganesh; Kumar, Arun; Subramaniam, Anandh

2018-07-01

The proximity of interfaces gives prominence to image forces experienced by dislocations. The presence of surface stress alters the traction-free boundary conditions existing on free-surfaces and hence is expected to alter the magnitude of the image force. In the current work, using a combined simulation of surface stress and an edge dislocation in a semi-infinite body, we evaluate the configurational effects on the system. We demonstrate that if the extra half-plane of the edge dislocation is parallel to the surface, the image force (glide) is not altered due to surface stress; however, the dislocation experiences a torque. The surface stress breaks the 'climb image force' symmetry, thus leading to non-equivalence between positive and negative climb. We discover an equilibrium position for the edge dislocation in the positive 'climb geometry', arising due to a competition between the interaction of the dislocation stress fields with the surface stress and the image dislocation. Torque in the climb configuration is not affected by surface stress (remains zero). Surface stress is computed using a recently developed two-scale model based on Shuttleworth's idea and image forces using a finite element model developed earlier. The effect of surface stress on the image force and torque experienced by the dislocation monopole is analysed using illustrative 3D models.

Surface water, groundwater and unified 3D-crack network as a triple coupling dynamic system for a river watershed functioning - manifestation in catastrophic floods

NASA Astrophysics Data System (ADS)

Trifonova, Tatiana; Tulenev, Nikita; Trifonov, Dmitriy; Arakelian, Sergei

2014-05-01

1. Surface water and groundwater interaction model under conditions of huge level of precipitation in catastrophic floods and mudflows for mountain river watershed is introduced. Seismic processes and volcanic activity impact on the formation of disastrous floods due to dramatic change of the pressure field in groundwater horizons, is under discussion for such a triple coupling system, i.e. surface water - groundwater - crack network. Under the conception we analyze recent (2013) catastrophic water events: the catastrophic floods in Western Europe (May-June, 2013), in the Amur river basin, Russia/China (Aug.-Sept, 2013) and in Colorado, USA (Sept. 12-15,2013). In addition, a separate analysis is carried out for debris event in the Krimsk-city, Caucasus (Krasnodar) region, Russia (July 06-07, 2012). 2. There is a group of problems determined by dramatic discrepancies in water mass balance and other vital parameters, on the one hand, by estimation for different types of atmospheric precipitation (both torrential rain and continuous precipitations) and, on the other hand, for observable natural water events (i.e. catastrophic floods and/or mudflows/debris) on concrete territory. Analysis of many facts result in conclusion that we have the hard comparable/coincidence parameters under traditional conception for discussed events as an isolated/closed (river + rain) runoff-system. In contrast, the reasonable point of view does exist if we take into account the contribution of extra water source, which should be localized in river channel, i.e. functioning of open [(river + rain) + groundwater] flow-system has a principal meaning to understand the events occurrence. 3. The analysis and modeling for the events are carried out by us taking into account the following databases: (i) groundwater map dislocation, it resources and flow balance in studied areas, especially near the land surface being unstable in hydrological sense by many reasons, as well due to heavy rain stimulating a trigger mechanism for releasing of groundwater; (ii) the crackness/fracturing structure as a characteristic property for all rocks, being dissecting by totality of cracks/fissures and along which (in the case when a good development crack becomes a fault) a vertical and/or lateral movement (of both groundwater and surface water mass) occurs as a result of excessive strain; (iii) areas of formation and modification in time of groundwater transit system, and especially the modalities for it exit on surface by different factors including tectonic processes under adjustable conditions for both localization of earthquake epicenters/volcanos activity areas and occurring floods in respect of propagating of seismic waves and dislocation of border for lithospheric plates/magma objects in the river basin region; (iv) the way of distribution over surface for water flows/fronts in the further, which can be described by nonlinear hydrodynamic approach, e.g. by different classes of solutions for Korteweg-de Vries equation, associated with observable natural phenomena. 4. Monitoring in dynamics of state of hydrostatic/hydrodynamic pressures in underground aquifers (e.g. by artesian wells in comparison with two databases: before and after the events) is an important factor in assessing of acceptable risk for the events. Combining it with monitoring of seismic activity should allow to make a more detailed forecasting and zoning of potentially dangerous areas for such natural disasters.

Exploitation of "Excess" Data Now Routinely Collected by Large N, Continuously Recorded Oil Exploration Surveys: From Microseismicity to Deep Crustal Imaging

NASA Astrophysics Data System (ADS)

Brown, L. D.

2014-12-01

The rapidly expanding use by the oil and gas industry of "nodal", large channel capacity areal arrays that record continuously for extended periods of time is generating large volumes of data in excess of that needed for the conventional CMP reflection imaging that is the primary goal of such surveys. These excess data, once considered as simply "noise", have recently been recognized to have utility not only for the exploration seismologist but also for addressing a diverse range of phenomena. The most widely recognized use for these "noise" records is surface wave tomographic imaging of near surface velocity structure via seismic interferometry of ambient natural noise. Such results are proving to be of great value in enhancing conventional 3D exploration imagery, but they should be appreciated in their own right for the information they provide on the shallow subsurface to the hydrologist, engineer and tectonicist. Another relatively dramatic application is the delineation of local structure by tracing the propagation of body and surface waves from local and teleseismic events across these dense arrays. Here I would like draw attention to three other promising uses for such data: a) detection and mapping of microseismicity below the detection thresholds of conventional earthquake monitoring networks, especially in areas of low conventional seismicity; b) reflection and refraction imaging of structure using cultural, as opposed to natural, energy sources, and c) systematic mapping of the basement in 3D using the existing exploration sources recorded at travel times longer than that typically harvested for resource purposes. We conclude by emphasizing that these potentially invaluable "extras" are now being recorded routinely around the world, but there is as yet no mechanism in place to ensure they are exploited rather than simply deleted.

Plasma Immersion Ion Implantation with Solid Targets for Space and Aerospace Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oliveira, R. M.; Goncalves, J. A. N.; Ueda, M.

2009-01-05

This paper describes successful results obtained by a new type of plasma source, named as Vaporization of Solid Targets (VAST), for treatment of materials for space and aerospace applications, by means of plasma immersion ion implantation and deposition (PIII and D). Here, the solid element is vaporized in a high pressure glow discharge, being further ionized and implanted/deposited in a low pressure cycle, with the aid of an extra electrode. First experiments in VAST were run using lithium as the solid target. Samples of silicon and aluminum alloy (2024) were immersed into highly ionized lithium plasma, whose density was measuredmore » by a double Langmuir probe. Measurements performed with scanning electron microscopy (SEM) showed clear modification of the cross-sectioned treated silicon samples. X-ray photoelectron spectroscopy (XPS) analysis revealed that lithium was implanted/deposited into/onto the surface of the silicon. Implantation depth profiles may vary according to the condition of operation of VAST. One direct application of this treatment concerns the protection against radiation damage for silicon solar cells. For the case of the aluminum alloy, X-ray diffraction analysis indicated the appearance of prominent new peaks. Surface modification of A12024 by lithium implantation/deposition can lower the coefficient of friction and improve the resistance to fatigue of this alloy. Recently, cadmium was vaporized and ionized in VAST. The main benefit of this element is associated with the improvement of corrosion resistance of metallic substrates. Besides lithium and cadmium, VAST allows to performing PIII and D with other species, leading to the modification of the near-surface of materials for distinct purposes, including applications in the space and aerospace areas.« less

Why Do Organisms in the Atlantic Ocean Produce So Much CaCO3?

NASA Astrophysics Data System (ADS)

Toggweiler, J. R.

2010-12-01

Sediments in the Atlantic are richer in CaCO3 than sediments in the other oceans. Sediment trap observations show that sinking particles in the Atlantic also tend to have more CaCO3 in relation to organic carbon than sinking particles elsewhere. The reason for the extra production of CaCO3 has never been very clear. The Atlantic is unusual because it receives much more than its share of the global input of river water. River water adds alkalinity to the surface ocean while the production of CaCO3 takes it away. In this presentation a new tracer, called Alk*, is derived from the surface alkalinity distribution to highlight the impact of river inputs and the production of CaCO3. If the production of CaCO3 were evenly distributed across the ocean one would expect the Atlantic to have a higher level of Alk* becaused of its river inputs. We find instead that Alk* is lower in the middle of the Atlantic than almost any place else. This, of course, is consistent with the fact that organisms in the Atlantic produce a lot of CaCO3. Comparison with other areas with especially low values of Alk* (Red Sea and northern Arabian Sea) shows that the production of CaCO3 is highly correlated across the ocean with the surface salinity. Hence, we argue that organisms in the Atlantic produce a lot of CaCO3 simply because the Atlantic is so salty. Salty waters, by definition, have more CO3= ions, which increase the supersaturation with respect to calcite and aragonite. This finding, while extremely simple, has major implifications for the impact of ocean acidification on calcifying organisms.

On the extended stellar structure around NGC 288

NASA Astrophysics Data System (ADS)

Piatti, Andrés E.

2018-01-01

We report on observational evidence of an extra-tidal clumpy structure around NGC 288 from homogeneous coverage of a large area with the Panoramic Survey Telescope and Rapid Response System (Pan-STARRS) PS1 data base. The extra-tidal star population has been disentangled from that of the Milky Way (MW) field by using a cleaning technique that successfully reproduces the stellar density, luminosity function and colour distributions of MW field stars. We have produced the cluster stellar density radial profile and a stellar density map from independent approaches, and we found the results to be in excellent agreement - the feature extends up to 3.5 times further than the cluster tidal radius. Previous works based on shallower photometric data sets have speculated on the existence of several long tidal tails, similar to that found in Pal 5. The present outcome shows that NGC 288 could hardly have such tails, but it favours the notion that the use of interactions with the MW tidal field has been a relatively inefficient process for stripping stars off the cluster. These results point to the need for a renewed overall study of the external regions of Galactic globular clusters (GGCs) in order to reliably characterize them. It will then be possible to investigate whether there is any connection between detected tidal tails, extra-tidal stellar populations and extended diffuse halo-like structures, and the dynamical histories of GGCs in the Galaxy.

Breast compression in mammography: how much is enough?

PubMed

Poulos, Ann; McLean, Donald; Rickard, Mary; Heard, Robert

2003-06-01

The amount of breast compression that is applied during mammography potentially influences image quality and the discomfort experienced. The aim of this study was to determine the relationship between applied compression force, breast thickness, reported discomfort and image quality. Participants were women attending routine breast screening by mammography at BreastScreen New South Wales Central and Eastern Sydney. During the mammographic procedure, an 'extra' craniocaudal (CC) film was taken at a reduced level of compression ranging from 10 to 30 Newtons. Breast thickness measurements were recorded for both the normal and the extra CC film. Details of discomfort experienced, cup size, menstrual status, existing breast pain and breast problems were also recorded. Radiologists were asked to compare the image quality of the normal and manipulated film. The results indicated that 24% of women did not experience a difference in thickness when the compression was reduced. This is an important new finding because the aim of breast compression is to reduce breast thickness. If breast thickness is not reduced when compression force is applied then discomfort is increased with no benefit in image quality. This has implications for mammographic practice when determining how much breast compression is sufficient. Radiologists found a decrease in contrast resolution within the fatty area of the breast between the normal and the extra CC film, confirming a decrease in image quality due to insufficient applied compression force.

Morphological changes in carotid arteries in stroke cases.

PubMed

Thapa, Guna Bahadur; Sundas, Alin; Rauniyar, Raj Kumar

2013-01-01

Majority of stroke is due to ischemic infarction and occurs in carotid artery territory. The extra cranial parts of carotid arteries are the common sites for the atherosclerotic plaque formation. Ultrasonography is the first line of investigation for screening of the carotid artery diseases to localize and characterize the plaques. Objective was to study the morphological changes in extra cranial part of carotid arteries in cases of ischemic infarction using Ultrasonography. It was an institution based prospective study and convenience sampling method was used. Computed Tomography proven ischemic infarct, lacunar infarction and transient ischemic infarction cases were included in the study. Fifty four cases were included in the study. Mean of Intimo-medial Complex Thickness was 0.89 mm and 0.88 mm in right and left side respectively. Sixty five percent cases had plaque in extra cranial part of carotid artery. Ninety three percent of plaque was found in and adjacent to the carotid bulb region. Ipsilateral plaque was found in 76% and 65% cases on right and left side respectively. Fifty three percent of cases had soft plaque. Majority of cases had less than 50% narrowing of the lumen diameter in term of cross-sectional area due to plaque. Thirteen (24%) cases had plaque in internal carotid artery. Carotid ultrasound can be used for screening of the asymptomatic but high-risk cases and following up of the symptomatic cases to plan for necessary management as required.

Incidence and risk factors of early arterial blood flow stasis during first radioembolization of primary and secondary liver malignancy using resin microspheres: an initial single-center analysis.

PubMed

Pieper, Claus Christian; Willinek, Winfried A; Thomas, Daniel; Ahmadzadehfar, Hojjat; Essler, Markus; Nadal, Jennifer; Wilhelm, Kai E; Schild, Hans Heinz; Meyer, Carsten

2016-08-01

To retrospectively determine incidence of early arterial blood flow stasis and its influencing factors during resin-based radioembolization (RE) of liver tumours. Data of patients undergoing resin-based RE from 06/2006-12/2013 were reviewed. Second RE procedures of the same liver lobe were excluded. 90-yttrium dose was calculated according to the body surface area method. Data were categorized according to RE without full dose application because of early stasis and with full dose application. Clinical/procedural characteristics were recorded. Logistic regression was performed to identify associations between clinical/procedural characteristics and early stasis. 362 patients [220 male; mean age 62 years (range 26-90)] underwent 416 RE sessions with early stasis occurring in 103 REs (24.8 %). Highest incidence and degree of stasis were observed in breast cancer metastases [42.6 % (20/47); 55.8 % of mean intended dose administered]. Independent risk factors were: metastasized breast cancer (odds ratio [OR] 2.18, p = 0.02), liver tumour-burden <25 % and 25-50 % (ORs 5.33, 15.64; p < 0.0001), tumour hypovascularity (OR 2.70, p = 0.04), previous bevacizumab therapy (OR 2.79, p = 0.0009) and concurrent chemotherapy (OR 8.69, p < 0.0001). Early stasis was observed in 24.8 % of resin-based REs. In the presence of the identified risk factors, extra care should be taken during microsphere administration. • Early arterial blood flow stasis is a known problem of resin-based RE. • The study showed that early stasis occurs in 25 % of REs. • Several clinical and procedural factors are associated with early stasis. • In patients at risk extra care should be taken during RE.

Characteristics of lesional and extra-lesional cortical grey matter in relapsing-remitting and secondary progressive multiple sclerosis: A magnetisation transfer and diffusion tensor imaging study.

PubMed

Yaldizli, Özgür; Pardini, Matteo; Sethi, Varun; Muhlert, Nils; Liu, Zheng; Tozer, Daniel J; Samson, Rebecca S; Wheeler-Kingshott, Claudia Am; Yousry, Tarek A; Miller, David H; Chard, Declan T

2016-02-01

In multiple sclerosis (MS), diffusion tensor and magnetisation transfer imaging are both abnormal in lesional and extra-lesional cortical grey matter, but differences between clinical subtypes and associations with clinical outcomes have only been partly assessed. To compare mean diffusivity, fractional anisotropy and magnetisation transfer ratio (MTR) in cortical grey matter lesions (detected using phase-sensitive inversion recovery (PSIR) imaging) and extra-lesional cortical grey matter, and assess associations with disability in relapse-onset MS. Seventy-two people with MS (46 relapsing-remitting (RR), 26 secondary progressive (SP)) and 36 healthy controls were included in this study. MTR, mean diffusivity and fractional anisotropy were measured in lesional and extra-lesional cortical grey matter. Mean fractional anisotropy was higher and MTR lower in lesional compared with extra-lesional cortical grey matter. In extra-lesional cortical grey matter mean fractional anisotropy and MTR were lower, and mean diffusivity was higher in the MS group compared with controls. Mean MTR was lower and mean diffusivity was higher in lesional and extra-lesional cortical grey matter in SPMS when compared with RRMS. These differences were independent of disease duration. In multivariate analyses, MTR in extra-lesional more so than lesional cortical grey matter was associated with disability. Magnetic resonance abnormalities in lesional and extra-lesional cortical grey matter are greater in SPMS than RRMS. Changes in extra-lesional compared with lesional cortical grey matter are more consistently associated with disability. © The Author(s), 2015.

Pushing the boundaries of high power lasers: low loss, large area CVD diamond

NASA Astrophysics Data System (ADS)

Wickham, Benjamin; Schoofs, Frank; Olsson-Robbie, Stefan; Bennett, Andrew; Balmer, Richard

2018-02-01

Synthetic CVD diamond has exceptional properties, including broad spectral transmission, physical and chemical robustness, and the highest thermal conductivity of any known material, making diamond an attractive material for medium to high power optical and laser applications, minimizing the detrimental effects of thermal lensing and radiation damage. Example applications include ATR prisms, Raman laser crystals, extra- and intra-cavity laser cooling. In each case the demands on the fundamental material properties and fabrication routes are slightly different. In recent years, there has been good progress in the development of low-loss, single crystal diamond, suitable for higher power densities, higher pulse rates and more demanding intra- and extra-cavity thermal management. The adoption of single crystal diamond in this area has however, been hindered by the availability of large area, low birefringence plates. To address this, we report a combination of CVD growth and processing methods that have enabled the manufacture of large, low defect substrates. A final homoepitaxial, low absorption synthesis stage has produced plates with large area (up to 16 mm edge length), low absorption (α<0.005 cm-1 at 1064 nm), and low birefringence (Δn <10-5), suitable for double-sided intra-cavity cooling. We demonstrate the practical advances in synthesis, including increasing the size while reducing in-use losses compared to previous generations of single crystal material, and practical developments in processing and implementation of the single crystal diamond parts, optimizing them for use in a state-of-the-art femto-second pulsed Ti:Sa thin disk gain module, all made in collaboration with the wider European FP7 funded Ti:Sa TD consortium.

When mothers make sons sexy: maternal effects contribute to the increased sexual attractiveness of extra-pair offspring.

PubMed

Tschirren, Barbara; Postma, Erik; Rutstein, Alison N; Griffith, Simon C

2012-03-22

Quality differences between offspring sired by the social and by an extra-pair partner are usually assumed to have a genetic basis, reflecting genetic benefits of female extra-pair mate choice. In the zebra finch (Taeniopygia guttata), we identified a colour ornament that is under sexual selection and appears to have a heritable basis. Hence, by engaging in extra-pair copulations with highly ornamented males, females could, in theory, obtain genes for increased offspring attractiveness. Indeed, sons sired by extra-pair partners had larger ornaments, seemingly supporting the genetic benefit hypothesis. Yet, when comparing ornament size of the social and extra-pair partners, there was no difference. Hence, the observed differences most likely had an environmental basis, mediated, for example, via differential maternal investment of resources into the eggs fertilized by extra-pair and social partners. Such maternal effects may (at least partly) be mediated by egg size, which we found to be associated with mean ornament expression in sons. Our results are consistent with the idea that maternal effects can shape sexual selection by altering the genotype-phenotype relationship for ornamentation. They also caution against automatically attributing greater offspring attractiveness or viability to an extra-pair mate's superior genetic quality, as without controlling for differential maternal investment we may significantly overestimate the role of genetic benefits in the evolution of extra-pair mating behaviour.

When mothers make sons sexy: maternal effects contribute to the increased sexual attractiveness of extra-pair offspring

PubMed Central

Tschirren, Barbara; Postma, Erik; Rutstein, Alison N.; Griffith, Simon C.

2012-01-01

Quality differences between offspring sired by the social and by an extra-pair partner are usually assumed to have a genetic basis, reflecting genetic benefits of female extra-pair mate choice. In the zebra finch (Taeniopygia guttata), we identified a colour ornament that is under sexual selection and appears to have a heritable basis. Hence, by engaging in extra-pair copulations with highly ornamented males, females could, in theory, obtain genes for increased offspring attractiveness. Indeed, sons sired by extra-pair partners had larger ornaments, seemingly supporting the genetic benefit hypothesis. Yet, when comparing ornament size of the social and extra-pair partners, there was no difference. Hence, the observed differences most likely had an environmental basis, mediated, for example, via differential maternal investment of resources into the eggs fertilized by extra-pair and social partners. Such maternal effects may (at least partly) be mediated by egg size, which we found to be associated with mean ornament expression in sons. Our results are consistent with the idea that maternal effects can shape sexual selection by altering the genotype–phenotype relationship for ornamentation. They also caution against automatically attributing greater offspring attractiveness or viability to an extra-pair mate's superior genetic quality, as without controlling for differential maternal investment we may significantly overestimate the role of genetic benefits in the evolution of extra-pair mating behaviour. PMID:21957136

Quantifying inbreeding avoidance through extra-pair reproduction.

PubMed

Reid, Jane M; Arcese, Peter; Keller, Lukas F; Germain, Ryan R; Duthie, A Bradley; Losdat, Sylvain; Wolak, Matthew E; Nietlisbach, Pirmin

2015-01-01

Extra-pair reproduction is widely hypothesized to allow females to avoid inbreeding with related socially paired males. Consequently, numerous field studies have tested the key predictions that extra-pair offspring are less inbred than females' alternative within-pair offspring, and that the probability of extra-pair reproduction increases with a female's relatedness to her socially paired male. However, such studies rarely measure inbreeding or relatedness sufficiently precisely to detect subtle effects, or consider biases stemming from failure to observe inbred offspring that die during early development. Analyses of multigenerational song sparrow (Melospiza melodia) pedigree data showed that most females had opportunity to increase or decrease the coefficient of inbreeding of their offspring through extra-pair reproduction with neighboring males. In practice, observed extra-pair offspring had lower inbreeding coefficients than females' within-pair offspring on average, while the probability of extra-pair reproduction increased substantially with the coefficient of kinship between a female and her socially paired male. However, simulations showed that such effects could simply reflect bias stemming from inbreeding depression in early offspring survival. The null hypothesis that extra-pair reproduction is random with respect to kinship therefore cannot be definitively rejected in song sparrows, and existing general evidence that females avoid inbreeding through extra-pair reproduction requires reevaluation given such biases. © 2014 The Author(s). Evolution © 2014 The Society for the Study of Evolution.

Extra-curricular participation in sports and socio-demographic factors in Spanish adolescents: the AVENA study.

PubMed

Gracia-Marco, Luis; Tomas, Concepcion; Vicente-Rodriguez, German; Jimenez-Pavon, David; Rey-Lopez, Juan P; Ortega, Francisco B; Lanza-Saiz, Ricardo; Moreno, Luis A

2010-11-01

The aims of this study were to identify differences between the sexes in extra-curricular participation in sports and to determine its association with body fat and socio-demographic factors in Spanish adolescents. A total of 2165 adolescents (1124 males and 1041 females) aged 13.0-18.5 years from the AVENA Study participated. Participants filled in an ad hoc questionnaire for extra-curricular participation in sports, which was the dependent variable. Independent variables were: age, percent body fat, and father's and mother's educational level and occupation. Chi-square tests and logistic regression were applied. Bivariate analysis showed for male adolescents that age and father's occupation were related to extra-curricular participation in sports. In addition, body fat and mother's education and occupation (all P < 0.05) were related to extra-curricular participation of in sports for female adolescents. Logistic regression analysis showed that the likelihood of involvement in extra-curricular participation in sports was 5.3-fold (3.86-7.38) higher for males than females. Age and father's education in both males and females were independently associated with extra-curricular participation in sports. In summary, Spanish male adolescents were shown to engage in more extra-curricular sports than females. In addition, age and father's education (in both sexes) were associated with the participation of their offspring in extra-curricular sports during adolescence.

Influence of nitrogen doping in sumanene framework toward hydrogen storage: A computational study.

PubMed

Reisi-Vanani, Adel; Shamsali, Fatemeh

2017-09-01

Two conditions are important to obtain appropriate substances for hydrogen storage; high surface area and fitting binding energy (BE). Doping is a key strategy that improves BE. We investigated hydrogen adsorption onto twenty six nitrogen disubstituted isomers of sumanene (C 19 N 2 H 12 ) by MP2/6-311++G(d,p)//B3LYP/6-31+G(d) and M06-2X/6-31+G(d) levels of theory. Effect of nitrogen doping in different positions of sumanene was checked. To obtain better BE, basis set superposition error (BSSE) and zero point energy (ZPE) corrections were used. Anticipating of adsorption sites and extra details about adsorption process was done by molecular electrostatic potential (MEP) surfaces. Various types of density of state (DOS) diagrams such as total DOS (TDOS), projected DOS (PDOS) and overlap population DOS (OPDOS) and natural bond orbital (NBO) analysis were used to find better insight on the adsorption properties. In addition of temperature depending of the BE, HOMO-LUMO gap (HLG), dipole moment, reactivity and stability, bowl depth and natural population analysis (NPA) of the isomers were studied. A physisorption mechanism for adsorption was proposed and a trivial change was seen. Place of nitrogen atoms in sumanene frame causes to binding energy increases or decreases compared with pristine sumanene. The best and the worst isomers and category of isomers were suggested. Copyright © 2017 Elsevier Inc. All rights reserved.

Polyacrylonitrile Fibers Anchored Cobalt/Graphene Sheet Nanocomposite: A Low-Cost, High-Performance and Reusable Catalyst for Hydrogen Generation.

PubMed

Zhang, Fei; Huang, Guoji; Hou, Chengyi; Wang, Hongzhi; Zhang, Qinghong; Li, Yaogang

2016-06-01

Cobalt and its composites are known to be active and inexpensive catalysts in sodium borohydride (NaBH4) hydrolysis to generate clean and renewable hydrogen energy. A novel fiber catalyst, cobalt/graphene sheet nanocomposite anchored on polyacrylonitrile fibers (Co/GRs-PANFs), which can be easily recycled and used in any reactor with different shapes, were synthesized by anchoring cobalt/graphene (Co/GRs) on polyacrylonitrile fibers coated with graphene (GRs-PANFs) at low temperature. The unique structure design effectively prevents the inter-sheet restacking of Co/GRs and fully exploits the large surface area of novel hybrid material for generate hydrogen. And the extra electron transfer path supplied by GRs on the surface of GRs-PANFs can also enhance their catalysis performances. The catalytic activity of the catalyst was investigated by the hydrolysis of NaBH4 in aqueous solution with GRs-PANFs. GRs powders and Co powders were used as control groups. It was found that both GRs and fiber contributed to the hydrogen generation rate of Co/GRs-PANFs (3222 mL x min(-1) x g(-1)), which is much higher than that of cobalt powders (915 mL x min(-1) x g(-1)) and Co/GRs (995 mL x min(-1) x g(-1)). The improved hydrogen generation rate, low cost and uncomplicated recycling make the Co/GRs-PANFs promising candidate as catalysts for hydrogen generation.

Anuran skin and basking behavior: The case of the treefrog Bokermannohyla alvarengai (Bokermann, 1956).

PubMed

Centeno, Fernanda C; Antoniazzi, Marta M; Andrade, Denis V; Kodama, Roberto T; Sciani, Juliana M; Pimenta, Daniel C; Jared, Carlos

2015-10-01

We investigated the morphology of the skin and the biochemistry of the lipids in the skin secretion of Bokermannohyla alvarengai, a montane treefrog that is known to bask regularly, motionless in full sunlight for extended periods of time. Our primary goal was to identify structural and biochemical modifications that might assist this frog species to accommodate the conflicting demands for heat exchange and water balance while basking. The modulation of heat exchange in basking B. alvarengai involves changes in skin coloration. We found that this response was supported by a prominent monolayer of large iridophores, whose light reflectance property is adjusted by the response of intervening melanophores. Mucosubstances and lipid compounds, mainly consisted of saturated fatty acids and presumably secreted from granular glands, were detected on the skin of B. alvarengai. These compounds formed an extra-epidermal layer over the animal's dorsal surface that might assist in the prevention of excessive water loss through evaporation. Additionally, we found well-developed skin folds at the ventral region of the frogs that lead to an increment of surface area. This feature combined with the extensive hypervascularization, also noticed for the skin of B. alvarengai, may play an important role in water reabsorption. The suite of structural and biochemical modifications identified for the integument of B. alvarengai seems to conjugate aspects relevant to both, heat exchange and water balance, allowing for this species to explore basking as an efficient thermoregulatory strategy. © 2015 Wiley Periodicals, Inc.

The Carboxy-Terminal Domain of Erb1 Is a Seven-Bladed ß-Propeller that Binds RNA

PubMed Central

Marcin, Wegrecki; Neira, Jose Luis; Bravo, Jeronimo

2015-01-01

Erb1 (Eukaryotic Ribosome Biogenesis 1) protein is essential for the maturation of the ribosomal 60S subunit. Functional studies in yeast and mammalian cells showed that altogether with Nop7 and Ytm1 it forms a stable subcomplex called PeBoW that is crucial for a correct rRNA processing. The exact function of the protein within the process remains unknown. The N-terminal region of the protein includes a well conserved region shown to be involved in PeBoW complex formation whereas the carboxy-terminal half was predicted to contain seven WD40 repeats. This first structural report on Erb1 from yeast describes the architecture of a seven-bladed β-propeller domain that revealed a characteristic extra motif formed by two α-helices and a β-strand that insert within the second WD repeat. We performed analysis of molecular surface and crystal packing, together with multiple sequence alignment and comparison of the structure with other β-propellers, in order to identify areas that are more likely to mediate protein-protein interactions. The abundance of many positively charged residues on the surface of the domain led us to investigate whether the propeller of Erb1 might be involved in RNA binding. Three independent assays confirmed that the protein interacted in vitro with polyuridilic acid (polyU), thus suggesting a possible role of the domain in rRNA rearrangement during ribosome biogenesis. PMID:25880847

Analogue solution for electrical capacity of membrane covered square cylinders in square array at high concentration.

PubMed

Cole, K S

1975-12-01

Analytical solutions of Laplace equations have given the electrical characteristics of membranes and interiors of spherical, ellipsoidal, and cylindrical cells in suspensions and tissues from impedance measurements, but the underlying assumptions may be invalid above 50% volume concentrations. However, resistance measurements on several nonconducting, close-packing forms in two and three dimensions closely predicted volume concentrations up to 100% by equations derived from Maxwell and Rayleigh. Calculations of membrane capacities of cells in suspensions and tissues from extensions of theory, as developed by Fricke and by Cole, have been useful but of unknown validity at high concentrations. A resistor analogue has been used to solve the finite difference approximation to the Laplace equation for the resistance and capacity of a square array of square cylindrical cells with surface capacity. An 11 x 11 array of resistors, simulating a quarter of the unit structure, was separated into intra- and extra-cellular regions by rows of capacitors corresponding to surface membrane areas from 3 x 3 to 11 x 11 or 7.5% to 100%. The extended Rayleigh equation predicted the cell concentrations and membrane capacities to within a few percent from boundary resistance and capacity measurements at low frequencies. This single example suggests that analytical solutions for other, similar two- and three-dimensional problems may be approximated up to near 100% concentrations and that there may be analytical justifications for such analogue solutions of Laplace equations.

Ultrasonic monitoring of pitting corrosion

NASA Astrophysics Data System (ADS)

Jarvis, A. J. C.; Cegla, F. B.; Bazaz, H.; Lozev, M.

2013-01-01

Exposure to corrosive substances in high temperature environments can cause damage accumulation in structural steels, particularly in the chemical and petrochemical industries. The interaction mechanisms are complex and varied; however initial damage propagation often manifests itself in the form of localized areas of increased material loss. Recent development of an ultrasonic wall thickness monitoring sensor capable of withstanding temperatures in excess of 500°C has allowed permanent monitoring within such hostile environments, providing information on how the shape of a pulse which has reflected from a corroding surface can change over time. Reconstructing localized corrosion depth and position may be possible by tracking such changes in reflected pulse shape, providing extra information on the state of the backwall and whether process conditions should be altered to increase plant life. This paper aims to experimentally investigate the effect certain localized features have on reflected pulse shape by `growing' artificial defects into the backwall while wall thickness is monitored using the sensor. The size and complexity of the three dimensional scattering problem lead to the development of a semi-analytical simulation based on the distributed point source method (DPSM) which is capable of simulating pulse reflection from complex surfaces measuring approximately 17×10λ Comparison to experimental results show that amplitude changes are predicted to within approximately 1dB and that pulse shape changes are accurately modelled. All experiments were carried out at room temperature, measurements at high temperature will be studied in the future.

Molecular simulations and experimental studies of zeolites

NASA Astrophysics Data System (ADS)

Moloy, Eric C.

Zeolites are microporous aluminosilicate tetrahedral framework materials that have symmetric cages and channels with open-diameters between 0.2 and 2.0 nm. Zeolites are used extensively in the petrochemical industries for both their microporosity and their catalytic properties. The role of water is paramount to the formation, structure, and stability of these materials. Zeolites frequently have extra-framework cations, and as a result, are important ion-exchange materials. Zeolites also play important roles as molecular sieves and catalysts. For all that is known about zeolites, much remains a mystery. How, for example, can the well established metastability of these structures be explained? What is the role of water with respect to the formation, stabilization, and dynamical properties? This dissertation addresses these questions mainly from a modeling perspective, but also with some experimental work as well. The first discussion addresses a special class of zeolites: pure-silica zeolites. Experimental enthalpy of formation data are combined with molecular modeling to address zeolitic metastability. Molecular modeling is used to calculate internal surface areas, and a linear relationship between formation enthalpy and internal surface areas is clearly established, producing an internal surface energy of approximately 93 mJ/m2. Nitrate bearing sodalite and cancrinite have formed under the caustic chemical conditions of some nuclear waste processing centers in the United States. These phases have fouled expensive process equipment, and are the primary constituents of the resilient heels in the bottom of storage tanks. Molecular modeling, including molecular mechanics, molecular dynamics, and density functional theory, is used to simulate these materials with respect to structure and dynamical properties. Some new, very interesting results are extracted from the simulation of anhydrous Na6[Si6Al 6O24] sodalite---most importantly, the identification of two distinct oxygen sites (rather than one), and formation of a new supercell. New calorimetric measurements of enthalpy are used to examine the energetics of the hydrosodalite family of zeolites---specifically, formation enthalpies and hydration energies. Finally, force-field computational methods begin the examination of water in terms of energetics, structure, and radionuclide containment and diffusion.

Analysis of uncertainties in GOSAT-inferred regional CO2 fluxes

NASA Astrophysics Data System (ADS)

Ishizawa, M.; Shirai, T.; Maksyutov, S. S.; Yoshida, Y.; Morino, I.; Inoue, M.; Nakatsuru, T.; Uchino, O.; Mabuchi, K.

2016-12-01

Satellite-based CO2 measurements have potential for improving our understanding global carbon cycle because of more spatiotemporal coverage than those from ground-based observations. Since the Greenhouse gases Observing Satellite (GOSAT) was launched in January 2009, it has been measuring the column-average dry air-mole function of CO2 (XCO2) from the space. To utilize the GOSAT XCO2 for better CO2 flux estimates, several challenges should be overcome. Systematic errors (biases) in XCO2 retrievals are a major factor which leads to large differences among inverted CO2 fluxes. Temporally variable data coverage and density are also taken into account when interpreting the estimated surface fluxes. In this study, we employ an atmospheric inverse model to investigate the impacts of retrievals biases and temporally varying global distribution of GOSAT XCO2 on surface CO2 flux estimates. Inversions are performed for 2009-2013, with several subsets of the 5-year record of GOSAT XCO2 (v2.21) and its bias-corrected XCO2. GOSAT XCO2 data consist of three types: H-gain for vegetated lands, M-gain for bright surfaces (desert areas), and sun-glint for ocean surface. The results show that the global spatial distributions of estimated CO2 fluxes depend on the subset of XCO2 used. M-gain XCO2 results in unrealistically high CO2 emissions in and around the Middle East, including the neighboring ocean regions. On the other hand, M-gain XCO2 causes compensating unrealistic uptakes far beyond M-gain regions in low latitudes, also partially contributing on the summer uptake in Europe. The joint inversions with both surface measurements and GOSAT XCO2 data obtain larger flux gradient between the northern extra-tropics and the tropics than the inversion with surface measurements only for the first 2 years. Recently, these North-South gradients seem to be gradually reducing as the tropics become a weaker source or turn into a sink, while the net emission strength in East Asia is increasing. The 5-year XCO2 data allows us detailed analysis of uncertainties in GOSAT-inferred fluxes and assessment of GOSAT XCO2 biases.

Negative BOLD in default-mode structures measured with EEG-MREG is larger in temporal than extra-temporal epileptic spikes

PubMed Central

Jacobs, Julia; Menzel, Antonia; Ramantani, Georgia; Körbl, Katharina; Assländer, Jakob; Schulze-Bonhage, Andreas; Hennig, Jürgen; LeVan, Pierre

2014-01-01

Introduction: EEG-fMRI detects BOLD changes associated with epileptic interictal discharges (IED) and can identify epileptogenic networks in epilepsy patients. Besides positive BOLD changes, negative BOLD changes have sometimes been observed in the default-mode network, particularly using group analysis. A new fast fMRI sequence called MREG (Magnetic Resonance Encephalography) shows increased sensitivity to detect IED-related BOLD changes compared to the conventional EPI sequence, including frequent occurrence of negative BOLD responses in the DMN. The present study quantifies the concordance between the DMN and negative BOLD related to IEDs of temporal and extra-temporal origin. Methods: Focal epilepsy patients underwent simultaneous EEG-MREG. Areas of overlap were calculated between DMN regions, defined as precuneus, posterior cingulate, bilateral inferior parietal and mesial prefrontal cortices according to a standardized atlas, and significant negative BOLD changes revealed by an event-related analysis based on the timings of IED seen on EEG. Correlation between IED number/lobe of origin and the overlap were calculated. Results: 15 patients were analyzed, some showing IED over more than one location resulting in 30 different IED types. The average overlap between negative BOLD and DMN was significantly larger in temporal (23.7 ± 19.6 cm3) than extra-temporal IEDs (7.4 ± 5.1 cm3, p = 0.008). There was no significant correlation between the number of IEDs and the overlap between DMN structures and negative BOLD areas. Discussion: MREG results in an increased sensitivity to detect negative BOLD responses related to focal IED in single patients, with responses often occurring in DMN regions. In patients with high overlap with the DMN, this suggests that epileptic IEDs may be associated with a brief decrease in attention and cognitive ability. Interestingly this observation was not dependent on the frequency of IED but more common in IED of temporal origin. PMID:25477775

Outpost Assembly Using the ATHLETE Mobility System

NASA Technical Reports Server (NTRS)

Howe, A. Scott; Wilcox, Brian

2016-01-01

A planetary surface outpost will likely consist of elements delivered on multiple manifests, that will need to be assembled from a scattering of landings. Using the All-Terrain Hex-Limbed Extra-Terrestrial Explorer (ATHLETE) limbed robotic mobility system, the outpost site can be prepared in advance through leveling, paving, and in-situ structures. ATHLETE will be able to carry pressurized and non-pressurized payloads overland from the lander descent stage to the outpost location, and perform precision docking and assembly of components. In addition, spent descent stages can be carried to assembly locations to form elevated decks for external work platforms above the planet surface. This paper discusses several concepts that have been studied for possible inclusion in the NASA Evolvable Mars Campaign human exploration mission scenarios.

Vacuum solutions around spherically symmetric and static objects in the Starobinsky model

NASA Astrophysics Data System (ADS)

ćıkıntoǧlu, Sercan

2018-02-01

The vacuum solutions around a spherically symmetric and static object in the Starobinsky model are studied with a perturbative approach. The differential equations for the components of the metric and the Ricci scalar are obtained and solved by using the method of matched asymptotic expansions. The presence of higher order terms in this gravity model leads to the formation of a boundary layer near the surface of the star allowing the accommodation of the extra boundary conditions on the Ricci scalar. Accordingly, the metric can be different from the Schwarzschild solution near the star depending on the value of the Ricci scalar at the surface of the star while matching the Schwarzschild metric far from the star.

Tuning selectivity in catalysis by controlling particle shape

NASA Astrophysics Data System (ADS)

Lee, Ilkeun; Delbecq, Françoise; Morales, Ricardo; Albiter, Manuel A.; Zaera, Francisco

2009-02-01

A catalytic process for the selective formation of cis olefins would help minimize the production of unhealthy trans fats during the partial hydrogenation of edible oils. Here we report on the design of such a process on the basis of studies with model systems. Temperature programmed desorption data on single crystals showed that the isomerization of trans olefins to their cis counterparts is promoted by (111) facets of platinum, and that such selectivity is reversed on more open surfaces. Quantum mechanics calculations suggested that the extra stability of cis olefins seen on hydrogen-saturated Pt(111) surfaces may be due to a lesser degree of surface reconstruction, a factor found to be significant in the adsorption on close-packed platinum surfaces. Kinetic data using catalysts made out of dispersed tetrahedral Pt nanoparticles corroborated the selective promotion of the trans-to-cis isomerization on the (111) facets of the metal. Our work provides an example for how catalytic selectivity may be controlled by controlling the shape of the catalytic particles.

Irregular Periods

MedlinePlus

... have extra androgen, a hormone that can cause hair growth on the face, chin, chest, and abdomen. Extra ... You stop getting your period. You have extra hair growth on the face, chin, chest, or abdomen. You ...

Seeing beyond Tomorrow: What Really Is at Stake Here

ERIC Educational Resources Information Center

Johnson, Lynn Nations

2010-01-01

The fundamental role of school-university partnerships has been understood by a few, misunderstood by many, and dismissed by most as an extra, something a person focuses on if he or she has keen interest along with extra time, extra cash, and extra personnel. The concept rose to prominence in the late 1980s and into the 1990s; now, 20-plus years…

A coupled atmosphere-ocean-wave modeling approach for a Tropical Like Cyclone in the Mediterranean Sea

NASA Astrophysics Data System (ADS)

Ricchi, Antonio; Miglietta, M. Marcello; Barbariol, Francesco; Benetazzo, Alvise; Bonaldo, Davide; Falcieri, Francesco; Russo, Aniello; Sclavo, Mauro; Carniel, Sandro

2016-04-01

In November 6-8, 2011, in the Balearic islands an extra-tropical depression developed into a Tropical-Like Cyclone (TLC) characterized by a deep-warm core, leading to a mean sea level pressure minimum of about 991 hPa, 10 m wind speeds higher than 28 m/s around the eye, and very intense rainfall, especially in the Gulf of Lion. To explore in detail the effect of the sea surface temperature on the Medicane evolution, we employed the coupled modeling system COAWST, which consists of the ROMS model for the hydrodynamic part, the WRF model for the meteorological part, and the SWAN for the surface wave modeling. All model run over 5 km domain (same domain for ROMS and SWAN). COAWST was used with different configurations: in Stand Alone (SA) mode (that is, with only the atmospheric part), in atmosphere-ocean coupled mode (AO), and in a fully coupled version including also surface waves (AOW). Several sensitivity simulations performed with the SA approach were undertaken to simulate the TLC evolution. Especially in the later stage of the lifetime, when the cyclone was weaker, the predictability appears limited. Sensitivity simulations have considered the effect of the cumulus scheme (using an explicit scheme the Medicane does not develop and remains an extra-tropical depression) and the PBL scheme (using MYJ or MYNN resulting "Medicane" are extremely similar, although the roughness appears rather different among the two experiments). Comparing the three runs, the effects of different simulations on the Medicane tracks are significant only in the later stage of the cyclone lifetime. In the overall modeled basin, wind intensity is higher in the SA case w.r.t. both coupled runs. When compared to case AO, winds are about 1 m/s larger, even though the spatial distribution is very similar (possibly because of the lower SST produced by case AO). Case AOW produces less intense winds then SA and AO case in the areas where the wave is most developed (differences are about 2-4 m/s), while they are more intense in the neighborhood of the eye of the cyclone. Moreover, the inclusion of the wave model (AOW) has implications in the water column, by changing the depth of the ocean mixed layer along the track of the Medicane, so that eventually the SST in AOW run is colder than in AO. The date chosen for the run initialization appears important: an earlier initial condition allows to properly simulate the evolution of the cyclone from the cyclogenesis and to include the effect of the air-sea interaction through the coupled models.

Epoxy coated reinforcement in bridge decks

NASA Astrophysics Data System (ADS)

Wills, J.

A review was conducted of methods relating to the use of epoxy coated reinforcing bars for bridge decks and their potential for use in the United Kingdom. A survey of work carried out in the USA was carried out and the analysis used in a preliminary cost study. The options of having either a hot rolled asphalt surfacing or a permanently exposed concrete wearing surface were considered. It was concluded that epoxy coating of the top steel in addition to current waterproofing practice would provide, at relatively little extra cost, additional assurance that the reinforcement would be adequately protected throughout the life of a bridge. Current design rules do not permit decks with permanently exposed concrete wearing surface without waterproofing. Epoxy coating may afford a means of introducing such decks but before a positive recommendation to delete waterproofing can be made further studies would have to be undertaken.

Repeatable hydrogen generation of 3D microporous nickel membrane using chemical milling

NASA Astrophysics Data System (ADS)

Seo, Keumyoung; Lim, Taekyung; Ju, Sanghyun

2018-05-01

In this study, we investigated a novel method of hydrogen generation through a chemical milling process. In the process of generating hydrogen with a thermochemical water-splitting method using a 3D microporous nickel membrane, the nickel surface is oxidized, leading to a decreased generation of hydrogen gas with time. To regenerate hydrogen from the oxidized catalysts, the oxidized metal surface was easily removed at room temperature, re-exposing a metal surface with abundant oxygen vacancies for continuous hydrogen generation. With this method, ~110 µmol · g‑1 of hydrogen gas was continuously produced per cycle. Since this method enabled us to create a fit state for hydrogen generation without extra heat, light, or electrical energy, it can solve the biggest commercialization challenge: inefficiency because the energy required for hydrogen generation is higher than the energy of the generated hydrogen.

Recovery of Lunar Surface Access Module Residual and Reserve Propellants

NASA Technical Reports Server (NTRS)

Notardonato, William U.

2007-01-01

The Vision for Space Exploration calls for human exploration of the lunar surface in the 2020 timeframe. Sustained human exploration of the lunar surface will require supply, storage, and distribution of consumables for a variety of mission elements. These elements include propulsion systems for ascent and descent stages, life support for habitats and extra-vehicular activity, and reactants for power systems. NASA KSC has been tasked to develop technologies and strategies for consumables transfer for lunar exploration as part of the Exploration Technology Development Program. This paper will investigate details of operational concepts to scavenge residual propellants from the lunar descent propulsion system. Predictions on the mass of residuals and reserves are made. Estimates of heat transfer and boiloff rates are calculated and transient tank thermodynamic issues post-engine cutoff are modeled. Recovery and storage options including cryogenic liquid, vapor and water are discussed, and possible reuse of LSAM assets is presented.

Heavy metals contamination in surface and groundwater supply of an urban city.

PubMed

Dixit, R C; Verma, S R; Nitnaware, V; Thacker, N P

2003-04-01

There is a continuous increase in the demand of water supply in cities due to the industrialization and growing population. This extra supply is generally met by groundwaters or nearby available surface waters. It may lead into incomplete treatment and substandard supply of drinking water. To ensure that the intake water derived from surface and groundwater is clear, palatable, neither corrosive nor scale forming, free from undesirable taste, odor and acceptable from aesthetic and health point of view, the final water quality at Delhi have been evaluated. The final water supply of four treatment plants and 80 tubewells at Delhi were surveyed in 2000-2001 for cadmium, chromium, copper, iron, lead, manganese, nickel, selenium and zinc. The levels of manganese, copper, selenium and cadmium were found marginally above the Indian Standards (IS) specification regulated for drinking water. The data was used to assess the final water quality supplied at Delhi.

Emergency Meal Planning for Diabetics

MedlinePlus

... enough insulin and supplies on hand, including extra batteries for the glucometer emergency phone list with names ... unit and the local hospital radio with extra batteries flashlight with extra batteries candles and matches measuring ...

Anionic silicate organic frameworks constructed from hexacoordinate silicon centres

NASA Astrophysics Data System (ADS)

Roeser, Jérôme; Prill, Dragica; Bojdys, Michael J.; Fayon, Pierre; Trewin, Abbie; Fitch, Andrew N.; Schmidt, Martin U.; Thomas, Arne

2017-10-01

Crystalline frameworks composed of hexacoordinate silicon species have thus far only been observed in a few high pressure silicate phases. By implementing reversible Si-O chemistry for the crystallization of covalent organic frameworks, we demonstrate the simple one-pot synthesis of silicate organic frameworks based on octahedral dianionic SiO6 building units. Clear evidence of the hexacoordinate environment around the silicon atoms is given by 29Si nuclear magnetic resonance analysis. Characterization by high-resolution powder X-ray diffraction, density functional theory calculation and analysis of the pair-distribution function showed that those anionic frameworks—M2[Si(C16H10O4)1.5], where M = Li, Na, K and C16H10O4 is 9,10-dimethylanthracene-2,3,6,7-tetraolate—crystallize as two-dimensional hexagonal layers stabilized in a fully eclipsed stacking arrangement with pronounced disorder in the stacking direction. Permanent microporosity with high surface area (up to 1,276 m2 g-1) was evidenced by gas-sorption measurements. The negatively charged backbone balanced with extra-framework cations and the permanent microporosity are characteristics that are shared with zeolites.

Polar Amplification of Global Warming in Models Without Ice-Albedo Feedbacks

NASA Astrophysics Data System (ADS)

Alexeev, V. A.; Langen, P. L.

2004-12-01

Non-ice-albedo feedback mechanisms leading to polar amplification, as reported by Alexeev (2003), are explored in three aquaplanet climate model systems of different complexity. We analyze this pattern using three different "ghost forcing" experiments (Hansen et al, 1997). In the first one we uniformly add 4W/m2 to the oceanic mixed layer in order to roughly simulate a 2xCO2 forcing at the surface. The second forcing, of the same magnitude, is applied only within the tropics and the third forcing is applied only polewards of 30 degrees (north and south). It turns out that our systems' equilibrium responses are linear with respect to these forcings. Surprisingly, the response to the tropical-only forcing is essentially non-local with quite significant warming at higher latitudes. The response to the high-latitude-only forcing is more local and has higher amplitude near the poles. Our explanation of the polar amplification obtained in the uniform forcing experiment is therefore two-fold. Firstly, the tropics are much more difficult to warm because of the higher sensitivity of the surface budget to SST changes at higher temperatures. Secondly, any extra heat deposited in the tropics is not easily radiated to outer space because of the high opaqueness of the tropical atmosphere. The energy, most of which is latent, needs to be redistributed by transports to the extra-tropics. Consequently, the tropical "ghost forcing" results in an essentially non-local response, while the extra-tropical one yields a more localized response, because the energy in the atmosphere cannot propagate effectively equator-wards from high latitudes. The paper deals with these mechanisms in three climate model systems with no ice-albedo feedbacks - an EBM and two different GCMs - one with cloud feedbacks and the other with cloud feedbacks excluded. References. Alexeev, V.A., (2003) Sensitivity to CO2 doubling of an atmospheric GCM coupled to an oceanic mixed layer: a linear analysis. Climate Dynamics, 20: p.775-787. Hansen, J., Sato M, and R. Ruedy, (1997) Radiative forcing and climate response, JGR, 102, No. D6, 6831-6864.

Analysis of the polar amplification pattern of global warming on an aquaplanet in "ghost forcing" experiments with no ice-albedo feedbacks

NASA Astrophysics Data System (ADS)

Alexeev, V. A.; Langen, P. L.

2004-05-01

Non-ice-albedo feedback mechanisms leading to polar amplification, as reported by Alexeev (2003), are explored in three aquaplanet climate model systems of different complexity. We analyze this pattern using three different "ghost forcing" experiments (Hansen et al, 1997). In the first one we uniformly add 4W/m2 to the oceanic mixed layer in order to roughly simulate a 2xCO2 forcing at the surface. The second forcing, of the same magnitude, is applied only within the tropics and the third forcing is applied only polewards of 30 degrees (north and south). It turns out that our systems' equilibrium responses are linear with respect to these forcings. Surprisingly, the response to the tropical-only forcing is essentially non-local with quite significant warming at higher latitudes. The response to the high-latitude-only forcing is more local and has higher amplitude near the poles. Our explanation of the polar amplification obtained in the uniform forcing experiment is therefore two-fold. Firstly, the tropics are much more difficult to warm because of the higher sensitivity of the surface budget to SST changes at higher temperatures. Secondly, any extra heat deposited in the tropics is not easily radiated to outer space because of the high opaqueness of the tropical atmosphere. The energy, most of which is latent, needs to be redistributed by transports to the extra-tropics. Consequently, the tropical "ghost forcing" results in an essentially non-local response, while the extra-tropical one yields a more localized response, because the energy in the atmosphere cannot propagate effectively equator-wards from high latitudes. The paper deals with these mechanisms in three climate model systems with no ice-albedo feedback - an EBM and two different GCMs - one with cloud feedbacks and the other with cloud feedbacks excluded. References. Alexeev, V.A., (2003) Sensitivity to CO2 doubling of an atmospheric GCM coupled to an oceanic mixed layer: a linear analysis. Climate Dynamics, 20: p.775-787. Hansen, J., Sato M, and R. Ruedy, (1997) Radiative forcing and climate response, JGR, 102, No. D6, 6831-6864.

Studies of Dirac and Weyl fermions by angle resolved photoemission spectroscopy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Lunan

2016-01-01

This dissertation consists of three parts. First, we study magnetic domains in Nd 2Fe 14B single crystals using high resolution magnetic force microscopy (MFM). In addition to the elongated, wavy nano-domains reported by a previous MFM study, we found that the micrometer size, star-shaped fractal pattern is constructed of an elongated network of nano-domains about 20 nm in width, with resolution-limited domain walls thinner than 2 nm. Second, we studied extra Dirac cones of multilayer graphene on SiC surface by ARPES and SPA-LEED. We discovered extra Dirac cones on Fermi surface due to SiC 6 x 6 and graphene 6√more » 3 6√ 3 coincidence lattice on both single-layer and three-layer graphene sheets. We interpreted the position and intensity of the Dirac cone replicas, based on the scattering vectors from LEED patterns. We found the positions of replica Dirac cones are determined mostly by the 6 6 SiC superlattice even graphene layers grown thicker. Finally, we studied the electronic structure of MoTe 2 by ARPES and experimentally con rmed the prediction of type II Weyl state in this material. By combining the result of Density Functional Theory calculations and Berry curvature calculations with out experimental data, we identi ed Fermi arcs, track states and Weyl points, all features predicted to exist in a type II Weyl semimetal. This material is an excellent playground for studies of exotic Fermions.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, A.J.

The author concludes that it is probable that unconventional weapons and their associated delivery systems will form a permanent part of future political and strategic calculations in the Middle East. Some possible consequences of this situation can be divided into three classes: intra-regional, inter-regional and extra-regional. There is no doubt that Israel, driven by the need for security,precipitated the proliferation of unconventional weapons and of surface-to-surface missiles in the Middle East. It will now be driven to secure itself from the new threat to its security posed by its regional opponents. The most significant extra-regional consequence of developments in themore » Middle East may be further complication of great power arms control negotiations. To the re-discovery by the United States and the Soviet Union of their obligations under the Non-Proliferation Treaty to reduce the level of their nuclear weapons must now be added the desire to reduce, if not entirely eliminate, their chemical weapons stockpiles in advance of a global ban. It is possible that lesser powers will learn from the evidence of the great powers behavior, although that contradicts much of what we know of the psychology of decision making in international politics. What is necessary, though not necessarily sufficient, is that the U.S. and the USSR as the two external powers with potentially the greatest leverage, work together toward the resolution of the underlying causes of conflict in a region marked by more than a generation of competition between them.« less

Stereoscopic augmented reality using ultrasound volume rendering for laparoscopic surgery in children

NASA Astrophysics Data System (ADS)

Oh, Jihun; Kang, Xin; Wilson, Emmanuel; Peters, Craig A.; Kane, Timothy D.; Shekhar, Raj

2014-03-01

In laparoscopic surgery, live video provides visualization of the exposed organ surfaces in the surgical field, but is unable to show internal structures beneath those surfaces. The laparoscopic ultrasound is often used to visualize the internal structures, but its use is limited to intermittent confirmation because of the need for an extra hand to maneuver the ultrasound probe. Other limitations of using ultrasound are the difficulty of interpretation and the need for an extra port. The size of the ultrasound transducer may also be too large for its usage in small children. In this paper, we report on an augmented reality (AR) visualization system that features continuous hands-free volumetric ultrasound scanning of the surgical anatomy and video imaging from a stereoscopic laparoscope. The acquisition of volumetric ultrasound image is realized by precisely controlling a back-and-forth movement of an ultrasound transducer mounted on a linear slider. Furthermore, the ultrasound volume is refreshed several times per minute. This scanner will sit outside of the body in the envisioned use scenario and could be even integrated into the operating table. An overlay of the maximum intensity projection (MIP) of ultrasound volume on the laparoscopic stereo video through geometric transformations features an AR visualization system particularly suitable for children, because ultrasound is radiation-free and provides higher-quality images in small patients. The proposed AR representation promises to be better than the AR representation using ultrasound slice data.

X-ray microanalysis of porous materials using Monte Carlo simulations.

PubMed

Poirier, Dominique; Gauvin, Raynald

2011-01-01

Quantitative X-ray microanalysis models, such as ZAF or φ(ρz) methods, are normally based on solid, flat-polished specimens. This limits their use in various domains where porous materials are studied, such as powder metallurgy, catalysts, foams, etc. Previous experimental studies have shown that an increase in porosity leads to a deficit in X-ray emission for various materials, such as graphite, Cr(2) O(3) , CuO, ZnS (Ichinokawa et al., '69), Al(2) O(3) , and Ag (Lakis et al., '92). However, the mechanisms responsible for this decrease are unclear. The porosity by itself does not explain the loss in intensity, other mechanisms have therefore been proposed, such as extra energy loss by the diffusion of electrons by surface plasmons generated at the pores-solid interfaces, surface roughness, extra charging at the pores-solid interface, or carbon diffusion in the pores. However, the exact mechanism is still unclear. In order to better understand the effects of porosity on quantitative microanalysis, a new approach using Monte Carlo simulations was developed by Gauvin (2005) using a constant pore size. In this new study, the X-ray emissions model was modified to include a random log normal distribution of pores size in the simulated materials. This article presents, after a literature review of the previous works performed about X-ray microanalysis of porous materials, some of the results obtained with Gauvin's modified model. They are then compared with experimental results. Copyright © 2011 Wiley Periodicals, Inc.

Relative precision of inhaler aerodynamic particle size distribution (APSD) metrics by full resolution and abbreviated andersen cascade impactors (ACIs): part 2--investigation of bias in extra-fine mass fraction with AIM-HRT impactor.

PubMed

Mitchell, Jolyon P; Nagel, Mark W; Doyle, Cathy C; Ali, Rubina S; Avvakoumova, Valentina I; Christopher, J David; Quiroz, Jorge; Strickland, Helen; Tougas, Terrence; Lyapustina, Svetlana

2010-09-01

The purpose of this study was to resolve an anomalously high measure of extra-fine particle fraction (EPF) determined by the abbreviated cascade impactor possibly relevant for human respiratory tract (AIM-HRT) in the experiment described in Part 1 of this two-part series, in which the relative precision of abbreviated impactors was evaluated in comparison with a full resolution Andersen eight-stage cascade impactor (ACI). Evidence that the surface coating used to mitigate particle bounce was laterally displaced by the flow emerging from the jets of the lower stage was apparent upon microscopic examination of the associated collection plate of the AIM-HRT impactor whose cut point size defines EPF. A filter soaked in surfactant was floated on top of this collection plate, and further measurements were made using the same pressurized metered-dose inhaler-based formulation and following the same procedure as in Part 1. Measures of EPF, fine particle, and coarse particle fractions were comparable with those obtained with the ACI, indicating that the cause of the bias had been identified and removed. When working with abbreviated impactors, this precaution is advised whenever there is evidence that surface coating displacement has occurred, a task that can be readily accomplished by microscopic inspection of all collection plates after allowing the impactor to sample ambient air for a few minutes.

Dissent in Numbers: Making Strong Anonymity Scale

DTIC Science & Technology

2012-10-01

40,56,57,59], as an AAAS conference in 1997 concluded: “Anonymous Communication Should Be Re- garded as a Strong Human Right ; In the United States It...Is Also a Constitutional Right ” [56] The Arab Spring underscored the importance of this right , as organizers used pseudonymous Facebook and Twitter...with strong security requirements, might find a few extra seconds per Web page a reasonable price for local-area security. 6 Conclusion This paper has

Finding of No Significant Impact and Finding of No Practicable Alternative Construction of a Warehouse Complex MacDill Air Force Base, Florida

DTIC Science & Technology

2010-05-31

that Federal agencies identify and assess environmental health and safety risks that might disproportionately affect children. The Proposed Action...extra water is sent to one irrigation field near Golf Course Avenue and Affected Environment Environmental Assessment for Warehouse Complex...the area . Environmental Consequences Environmental Assessment for Warehouse Complex MacDill AFB, Florida FEBRUARY 2010 4-15 FINAL Figure

ARC-1976-AC76-0965

NASA Image and Video Library

1976-06-11

Artist: Rick Guidice Space Colonization - Bernal Sphere - The residential area is in the central sphere. Farming regions are in the 'tires.' Mirrors reflect sunlight into the habitat and farms. The large flat panels radiate away extra heat into space, and panels of solar cells provide electricity. Factories and docks for spaceships are at either end of the long central tube. (NOTE: art printed in Book 'Space Colony - Frontier of the 21st Century by Franklyn M. Branley)

[Analysis of urban forest landscape pattern in Hefei].

PubMed

Wu, Zemin; Wu, Wenyou; Gao, Jian; Zhang, Shaojie

2003-12-01

Based on the theory and methodology of landscape ecology, the landscape pattern of the study area (17.6 km2) in the downtown of Hefei was analyzed by using the techniques of RS, GPS and GIS. The object was to provide a comprehensive method to study urban forest structure and its function in environmental improvement. The results showed that there were 5 major landscape elements, i.e., building and hard pavement surface, water, road, urban forest, and general green land in the area. The landscape matrix was building and pavement surface, occupied 73.13% of total land. Road was the typical corridor element in the city and occupied 6.89%. Green land occupied 11.44%, in which, urban forest patch occupied 9.18%. There were 408 urban forest patches, with an area of 161.16 hm2. The average area of the patch was 0.396 hm2, and the maximum area was 12 hm2. 48% of urban forest patch was identified as small scale patches with < 500 m2 of area, and only 8.6% of them was larger than 1 hm2. The number of general green land patch was 255, with an area of 39.74 hm2, which accounted for 2.26% of land area, and its average and maximum area was 0.1558 hm2 and 3.86 hm2, respectively. There were 147 water patches, with an area of 149.93 hm2, and occupied 8.54% of land, and the average and maximum area of the patch was 1.02 hm2 and 16 hm2, respectively. In the study area, both of the Shannon-Weiner landscape diversity index and evenness were low, only 0.928 and 0.576, respectively. In addition, the dominance of urban forest patch and general green land was 0.39 showing that the two landscape elements had a certain influence on the environment of the study area. The concept of interior habitat for forest was introduced in this paper, which was employed to make a scale class system of urban forest patch. The threshold area with interior habitat for urban forest patch was 9800 m2, and there was 31.69 hm2 of interior habitat of urban forest in total, which occupied 19.7% of the total area of urban forest patch. This situation was not favorable for providing more habitats to support species diversity. It's suggested that the concept of interior habitat could be employed to identify urban forest patch, and a scale system of small scale patch of urban forest-middle patch-large patch-extra large patch was build in the paper. Based on this system, the ratio of different scales of urban forest patch in the study area should be 2:2:2:3. The authors also suggested that larger pieces (1.5-3.0 hm2) of urban forest patch should be built, and more urban forests should be established in the northeastern part of the city in the future.

Inhomogeneous compact extra dimensions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bronnikov, K.A.; Budaev, R.I.; Grobov, A.V.

We show that an inhomogeneous compact extra space possesses two necessary features— their existence does not contradict the observable value of the cosmological constant Λ{sub 4} in pure f ( R ) theory, and the extra dimensions are stable relative to the 'radion mode' of perturbations, the only mode considered. For a two-dimensional extra space, both analytical and numerical solutions for the metric are found, able to provide a zero or arbitrarily small Λ{sub 4}. A no-go theorem has also been proved, that maximally symmetric compact extra spaces are inconsistent with 4D Minkowski space in the framework of pure fmore » ( R ) gravity.« less

Protons are one of the limiting factors in determining sensitivity of nano surface-assisted (+)-mode LDI MS analyses.

PubMed

Cho, Eunji; Ahn, Miri; Kim, Young Hwan; Kim, Jongwon; Kim, Sunghwan

2013-10-01

A proton source employing a nanostructured gold surface for use in (+)-mode laser desorption ionization mass spectrometry (LDI-MS) was evaluated. Analysis of perdeuterated polyaromatic hydrocarbon compound dissolved in regular toluene, perdeuterated toluene, and deuterated methanol all showed that protonated ions were generated irregardless of solvent system. Therefore, it was concluded that residual water on the surface of the LDI plate was the major source of protons. The fact that residual water remaining after vacuum drying was the source of protons suggests that protons may be the limiting reagent in the LDI process and that overall ionization efficiency can be improved by incorporating an additional proton source. When extra proton sources, such as thiolate compounds and/or citric acid, were added to a nanostructured gold surface, the protonated signal abundance increased. These data show that protons are one of the limiting components in (+)-mode LDI MS analyses employing nanostructured gold surfaces. Therefore, it has been suggested that additional efforts are required to identify compounds that can act as proton donors without generating peaks that interfere with mass spectral interpretation.

Angular dependence of the MOSFET dosimeter and its impact on in vivo surface dose measurement in breast cancer treatment.

PubMed

Qin, S; Chen, T; Wang, L; Tu, Y; Yue, N; Zhou, J

2014-08-01

The focus of this study is the angular dependence of two types of Metal Oxide Semiconductor Field Effect Transistor (MOSFET) dosimeters (MOSFET20 and OneDose/OneDosePlus) when used for surface dose measurements. External beam radiationat different gantry angles were delivered to a cubic solid water phantom with a MOSFET placed on the top surface at CAX. The long axis of the MOSFET was oriented along the gantry axis of rotation, with the dosimeter (bubble side) facing the radiation source. MOSFET-measured surface doses were compared against calibrated radiochromic film readings. It was found that both types of MOSFET dosimeters exhibited larger than previously reported angular dependence when measuring surface dose in beams at large oblique angles. For the MOSFET20 dosimeter the measured surface dose deviation against film readings was as high as 17% when the incident angle was 72 degrees to the norm of the phantom surface. It is concluded that some MOSFET dosimeters may have a strong angular dependence when placed on the surface of water-equivalent material, even though they may have an isotropic angular response when surrounded by uniform medium. Extra on-surface calibration maybe necessary before using MOSFET dosimeters for skin dose measurement in tangential fields.

Geodesic congruences in warped spacetimes

NASA Astrophysics Data System (ADS)

Ghosh, Suman; Dasgupta, Anirvan; Kar, Sayan

2011-04-01

In this article, we explore the kinematics of timelike geodesic congruences in warped five-dimensional bulk spacetimes, with and without thick or thin branes. Beginning with geodesic flows in the Randall-Sundrum anti-de Sitter geometry without and with branes, we find analytical expressions for the expansion scalar and comment on the effects of including thin branes on its evolution. Later, we move on to congruences in more general warped bulk geometries with a cosmological thick brane and a time-dependent extra dimensional scale. Using analytical expressions for the velocity field, we interpret the expansion, shear and rotation (ESR) along the flows, as functions of the extra dimensional coordinate. The evolution of a cross-sectional area orthogonal to the congruence, as seen from a local observer’s point of view, is also shown graphically. Finally, the Raychaudhuri and geodesic equations in backgrounds with a thick brane are solved numerically in order to figure out the role of initial conditions (prescribed on the ESR) and spacetime curvature on the evolution of the ESR.

Extra-Pulmonary Tuberculosis and Its Surgical Treatment.

PubMed

Fry, Donald E

2016-08-01

Tuberculous infection has declined in the United States but remains a major infectious disease with morbidity and death for millions of people. Although the primary therapy is drugs, complications of the disease require surgical interventions. The published literature on tuberculosis was reviewed to provide a current understanding of the medical treatment of the disease and to define those areas where surgical intervention continues to be necessary. Multi-drug therapy for tuberculosis has become the standard and has reduced the complications of the disease necessitating surgical intervention. However, multi-drug resistance and extensively drug-resistant tuberculosis continue to be major problems and require effective initial therapy with surveillance to define resistant infections. The roles of surgery in tuberculosis are in establishing the diagnosis in extra-pulmonary infection and in the management of complications of disseminated disease. Tuberculosis remains an occupational risk for surgeons and surgical personnel. Tuberculosis is still a global problem, mandating recognition and treatment. Surgeons should have an understanding of the diverse presentation and complications of the disease.

Giant Transiting Planets Observations - GITPO

NASA Astrophysics Data System (ADS)

Afonso, C.

2006-08-01

The search for extrasolar planets is nowadays one of the most promising science drivers in Astronomy. The radial velocity technique proved to be successful in planet hunting, harvesting more than a hundred planets to date. In these last years, the transit method has come to fruition, with the detection of seven Jupiter-mass extrasolar transiting planets in close-in orbits (< 0.05 AU). Currently, the radius of planets can only be determined from transiting planets, representing the principal motivation and strength of this technique. The MPIA is presently building the Large Area Imager (LAIWO) for the 1m telescope in the Wise Observatory, Israel. LAIWO will have a field of view of one square degree. An intensive search for extra-solar planets will be performed with the 1m Wise telecope, together with the 1.2m MONET telescope in Texas. We will monitor three fields at a given time during three years and more than 200 nights per year. We expect several dozens of extra-solar planets.

Giant Transiting Planets Observations GITPO

NASA Astrophysics Data System (ADS)

Afonso, C.; Henning, Th.; Weldrake, D.; Mazeh, T.; Dreizler, S.

The search for extrasolar planets is nowadays one of the most promising science drivers in Astronomy. The radial velocity technique proved to be successful in planet hunting, harvesting more than a hundred planets to date. In these last recent years, the transit method has come to fruition, with the detection of seven Jupiter-mass extrasolar transiting planets in close-in orbits ({ AU). Currently, the radius of planets can only be determined from transiting planets, representing the principal motivation and strength of this technique. The MPIA is presently building the Large Area Imager (LAIWO) for the 1m telescope in the Wise Observatory, Israel. LAIWO will have a field of view of one square degree. An intensive search for extra-solar planets will be performed with the 1m Wise telescope, together with the 1.2m MONET telescope in Texas. We will monitor three fields at a given time during three years and more than 200 nights per year. We expect several dozens of extra-solar planets.

A novel role for visual perspective cues in the neural computation of depth

PubMed Central

Kim, HyungGoo R.; Angelaki, Dora E.; DeAngelis, Gregory C.

2014-01-01

As we explore a scene, our eye movements add global patterns of motion to the retinal image, complicating visual motion produced by self-motion or moving objects. Conventionally, it has been assumed that extra-retinal signals, such as efference copy of smooth pursuit commands, are required to compensate for the visual consequences of eye rotations. We consider an alternative possibility: namely, that the visual system can infer eye rotations from global patterns of image motion. We visually simulated combinations of eye translation and rotation, including perspective distortions that change dynamically over time. We demonstrate that incorporating these “dynamic perspective” cues allows the visual system to generate selectivity for depth sign from motion parallax in macaque area MT, a computation that was previously thought to require extra-retinal signals regarding eye velocity. Our findings suggest novel neural mechanisms that analyze global patterns of visual motion to perform computations that require knowledge of eye rotations. PMID:25436667

Audiovisual Association Learning in the Absence of Primary Visual Cortex.

PubMed

Seirafi, Mehrdad; De Weerd, Peter; Pegna, Alan J; de Gelder, Beatrice

2015-01-01

Learning audiovisual associations is mediated by the primary cortical areas; however, recent animal studies suggest that such learning can take place even in the absence of the primary visual cortex. Other studies have demonstrated the involvement of extra-geniculate pathways and especially the superior colliculus (SC) in audiovisual association learning. Here, we investigated such learning in a rare human patient with complete loss of the bilateral striate cortex. We carried out an implicit audiovisual association learning task with two different colors of red and purple (the latter color known to minimally activate the extra-genicular pathway). Interestingly, the patient learned the association between an auditory cue and a visual stimulus only when the unseen visual stimulus was red, but not when it was purple. The current study presents the first evidence showing the possibility of audiovisual association learning in humans with lesioned striate cortex. Furthermore, in line with animal studies, it supports an important role for the SC in audiovisual associative learning.

Five Things Girls Want to Know about Periods

MedlinePlus

... supplies." Even better, keep extras in your backpack, locker, or gym bag. 5. What If Blood Leaks ... regularly and keep extras in your backpack or locker. For extra protection on heavy days, some girls ...

Effect of pH on the extra cellular synthesis of gold and silver nanoparticles by Saccharomyces cerevisae.

PubMed

Lim, Hyun-Ah; Mishra, Amrita; Yun, Soon-Il

2011-01-01

In the present study, the synthesis of gold and silver nanoparticles was investigated using the culture supernatant broth of the yeast Saccharomyces cerevisae. Gold nanoparticles were formed within 24 hours of gold ion coming in contact with the culture supernatant broth. In case of silver the reduction process took 48 hours. The synthesized nanoparticles were investigated by UV-Visible spectroscopy. Distinct surface plasmon peaks were observed at 540 nm and 415 nm for gold and silver nanoparticles respectively. Bio-TEM micrographs of the synthesized nanoparticles indicated that the particles were well dispersed and near spherical in shape. The size range of the gold and silver nanoparticles was around 20-100 nm and 5-20 nm respectively. XRD patterns showed the presence of three distinct peaks corresponding to gold and silver nanoparticles respectively. A pH range of 4 to 6 and 8 to 10 favored optimum synthesis of gold and silver nanoparticles respectively. The process of reduction being extra cellular could be used in future for downstream processing in an eco friendly manner.

Extra-domain B in oncofetal fibronectin structurally promotes fibrillar head-to-tail dimerization of extracellular matrix protein.

PubMed

Schiefner, André; Gebauer, Michaela; Skerra, Arne

2012-05-18

The type III extra-domain B (ED-B) is specifically spliced into fibronectin (Fn) during embryogenesis and neoangiogenesis, including many cancers. The x-ray structure of the recombinant four-domain fragment Fn(III)7B89 reveals a tightly associated, extended head-to-tail dimer, which is stabilized via pair-wise shape and charge complementarity. A tendency toward ED-B-dependent dimer formation in solution was supported by size exclusion chromatography and analytical ultracentrifugation. When amending the model with the known three-dimensional structure of the Fn(III)10 domain, its RGD loop as well as the adhesion synergy region in Fn(III)9-10 become displayed on the same face of the dimer; this should allow simultaneous binding of at least two integrins and, thus, receptor clustering on the cell surface and intracellular signaling. Insertion of ED-B appears to stabilize overall head-to-tail dimerization of two separate Fn chains, which, together with alternating homodimer formation via disulfide bridges at the C-terminal Fn tail, should lead to the known macromolecular fibril formation.

Determinants of Zambian men's extra-marital sex: a multi-level analysis.

PubMed

Benefo, Kofi D

2008-08-01

Research interest in extra-marital sex has increased as scholars have become aware of its role in sustaining epidemics of STDs in sub-Saharan Africa and elsewhere. While most research has used the socioeconomic and demographic features of individuals as determinants of extra-marital sexual behavior, this study examined the role played by community characteristics. Using data from the 2003 Zambian Sexual Behavior Survey for a sample of 1,118 men aged 15-59 and multilevel logistic regression techniques, the study analyzed the effects of community social and demographic characteristics on involvement in extra-marital sex while controlling for the men's individual-level characteristics. Men's involvement in extra-marital sex was found to vary with the characteristics of communities. The chances of men's involvement in extra-marital sex increased with community-level ethnic heterogeneity and urbanization, decreased in commercial centers, and in communities with a demographic surplus of males, health workers active in AIDS prevention, and access to the mass media. These results show that scholars trying to understand the motivations for extra-marital sex must pay attention to the characteristics of both individuals and communities.

Editorial: Focus on Extra Space Dimensions

NASA Astrophysics Data System (ADS)

Agashe, Kaustubh; Pomarol, Alex

2010-07-01

Experiments at the Large Hadron Collider (LHC) have just started. In addition to verifying the Standard Model (SM) of particle physics, these experiments will probe a new energy frontier and test extensions of the SM. The existence of extra dimensions is one of the most attractive possibilities for physics beyond the SM. This focus issue contains a collection of articles addressing both theoretical and phenomenological aspects of extra-dimensional models. Focus on Extra Space Dimensions Contents Minimal universal extra dimensions in CalcHEP/CompHEP AseshKrishna Datta, Kyoungchul Kong and Konstantin T Matchev Disordered extra dimensions Karim Benakli Codimension-2 brane-bulk matching: examples from six and ten dimensions Allan Bayntun, C P Burgess and Leo van Nierop Gauge threshold corrections in warped geometry Kiwoon Choi, Ian-Woo Kim and Chang Sub Shin Holographic methods and gauge-Higgs unification in flat extra dimensions Marco Serone Soft-wall stabilization Joan A Cabrer, Gero von Gersdorff and Mariano Quirós Warped five-dimensional models: phenomenological status and experimental prospects Hooman Davoudiasl, Shrihari Gopalakrishna, Eduardo Pontón and José Santiago

The influence of double-diffusive processes on the melting of ice in the Arctic Ocean: laboratory analogue experiments and their interpretation

NASA Astrophysics Data System (ADS)

Turner, J. S.; Veronis, G.

2004-03-01

This study has been motivated by two oceanographic observations: an increased rate of melting of sea ice in the Arctic Ocean, and the advance of an anomalously warm tongue of Atlantic water across the Arctic below the halocline over the last few decades. A series of laboratory experiments has been carried out in order to explore the physical principles underlying these phenomena, and the possibility that the extra heating at depth is responsible for the enhanced melting rate. A tank was filled with salt solution having various constant vertical density gradients. A block of ice one third of the length of the tank was floated on the surface at one end, and the rest of the surface and the walls of the tank were insulated. When no extra heat was supplied the melting rate (loss of weight of the ice in 1 h) systematically decreased as the stratification was changed from homogeneous fluid to increasingly large density gradients, while keeping the salinity of the solution in contact with the ice constant. An analogue of the intruding Atlantic water was produced by heating the lower portion of the vertical end wall at the end of the tank opposite to the ice end, keeping its temperature constant, and using the same range of salinity gradients as in the unheated experiments. Again the melting rate decreased as the density gradient was increased, but for low gradients it was larger than that in the unheated experiments. Above a certain intermediate gradient there was no significant difference in melting rate between the unheated and heated runs. The melting data were supplemented by photographs and vertical temperature and salinity profiles. The upward transfer of heat from the body of the fluid to melt the ice was clearly double-diffusive: overturning layers, separated by 'diffusive' interfaces, were visible on shadowgraphs, and the thickness of the layers decreased as the density gradient increased. The mean thickness of the layers through the depth of the tank also systematically decreased as the density gradient increased. With weak gradients an extra heat flux to the ice came from the intruding heated layer, but at large gradients this tongue of warm water at depth did not add to the flux near the surface. Though they were obtained in a simple, arbitrary and fixed geometry, we believe that the results of these experiments can be used as the basis for a better physical understanding of the melting rates of ice in the Arctic under various conditions.

SETI reloaded: Next generation radio telescopes, transients and cognitive computing

NASA Astrophysics Data System (ADS)

Garrett, Michael A.

2015-08-01

The Search for Extra-terrestrial Intelligence (SETI) using radio telescopes is an area of research that is now more than 50 years old. Thus far, both targeted and wide-area surveys have yet to detect artificial signals from intelligent civilisations. In this paper, I argue that the incidence of co-existing intelligent and communicating civilisations is probably small in the Milky Way. While this makes successful SETI searches a very difficult pursuit indeed, the huge impact of even a single detection requires us to continue the search. A substantial increase in the overall performance of radio telescopes (and in particular future wide-field instruments such as the Square Kilometre Array - SKA), provide renewed optimism in the field. Evidence for this is already to be seen in the success of SETI researchers in acquiring observations on some of the world's most sensitive radio telescope facilities via open, peer-reviewed processes. The increasing interest in the dynamic radio sky, and our ability to detect new and rapid transient phenomena such as Fast Radio Bursts (FRB) is also greatly encouraging. While the nature of FRBs is not yet fully understood, I argue they are unlikely to be the signature of distant extra-terrestrial civilisations. As astronomers face a data avalanche on all sides, advances made in related areas such as advanced Big Data analytics, and cognitive computing are crucial to enable serendipitous discoveries to be made. In any case, as the era of the SKA fast approaches, the prospects of a SETI detection have never been better.

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2013 CFR

2013-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2012 CFR

2012-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2011 CFR

2011-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2014 CFR

2014-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

19 CFR 151.64 - Extra copy of entry summary.

Code of Federal Regulations, 2010 CFR

2010-04-01

... TREASURY (CONTINUED) EXAMINATION, SAMPLING, AND TESTING OF MERCHANDISE Wool and Hair § 151.64 Extra copy of entry summary. One extra copy of the entry summary covering wool or hair subject to duty at a rate per...

Utilizing multiple scale models to improve predictions of extra-axial hemorrhage in the immature piglet.

PubMed

Scott, Gregory G; Margulies, Susan S; Coats, Brittany

2016-10-01

Traumatic brain injury (TBI) is a leading cause of death and disability in the USA. To help understand and better predict TBI, researchers have developed complex finite element (FE) models of the head which incorporate many biological structures such as scalp, skull, meninges, brain (with gray/white matter differentiation), and vasculature. However, most models drastically simplify the membranes and substructures between the pia and arachnoid membranes. We hypothesize that substructures in the pia-arachnoid complex (PAC) contribute substantially to brain deformation following head rotation, and that when included in FE models accuracy of extra-axial hemorrhage prediction improves. To test these hypotheses, microscale FE models of the PAC were developed to span the variability of PAC substructure anatomy and regional density. The constitutive response of these models were then integrated into an existing macroscale FE model of the immature piglet brain to identify changes in cortical stress distribution and predictions of extra-axial hemorrhage (EAH). Incorporating regional variability of PAC substructures substantially altered the distribution of principal stress on the cortical surface of the brain compared to a uniform representation of the PAC. Simulations of 24 non-impact rapid head rotations in an immature piglet animal model resulted in improved accuracy of EAH prediction (to 94 % sensitivity, 100 % specificity), as well as a high accuracy in regional hemorrhage prediction (to 82-100 % sensitivity, 100 % specificity). We conclude that including a biofidelic PAC substructure variability in FE models of the head is essential for improved predictions of hemorrhage at the brain/skull interface.

The mechanism of folding robustness revealed by the crystal structure of extra-superfolder GFP.

PubMed

Choi, Jae Young; Jang, Tae-Ho; Park, Hyun Ho

2017-01-01

Stability of green fluorescent protein (GFP) is sometimes important for a proper practical application of this protein. Random mutagenesis and targeted mutagenesis have been used to create better-folded variants of GFP, including recently reported extra-superfolder GFP. Our aim was to determine the crystal structure of extra-superfolder GFP, which is more robustly folded and stable than GFP and superfolder GFP. The structural and structure-based mutagenesis analyses revealed that some of the mutations that created extra-superfolder GFP (F46L, E126K, N149K, and S208L) contribute to folding robustness by stabilizing extra-superfolder GFP with various noncovalent bonds. © 2016 Federation of European Biochemical Societies.

Characterization and analysis of surface notches on Ti-alloy plates fabricated by additive manufacturing techniques

NASA Astrophysics Data System (ADS)

Chan, Kwai S.

2015-12-01

Rectangular plates of Ti-6Al-4V with extra low interstitial (ELI) were fabricated by layer-by-layer deposition techniques that included electron beam melting (EBM) and laser beam melting (LBM). The surface conditions of these plates were characterized using x-ray micro-computed tomography. The depth and radius of surface notch-like features on the LBM and EBM plates were measured from sectional images of individual virtual slices of the rectangular plates. The stress concentration factors of individual surface notches were computed and analyzed statistically to determine the appropriate distributions for the notch depth, notch radius, and stress concentration factor. These results were correlated with the fatigue life of the Ti-6Al-4V ELI alloys from an earlier investigation. A surface notch analysis was performed to assess the debit in the fatigue strength due to the surface notches. The assessment revealed that the fatigue lives of the additively manufactured plates with rough surface topographies and notch-like features are dominated by the fatigue crack growth of large cracks for both the LBM and EBM materials. The fatigue strength reduction due to the surface notches can be as large as 60%-75%. It is concluded that for better fatigue performance, the surface notches on EBM and LBM materials need to be removed by machining and the surface roughness be improved to a surface finish of about 1 μm.

Fuel Cells: Power System Option for Space Research

NASA Astrophysics Data System (ADS)

Shaneeth, M.; Mohanty, Surajeet

2012-07-01

Fuel Cells are direct energy conversion devices and, thereby, they deliver electrical energy at very high efficiency levels. Hydrogen and Oxygen gases are electrochemically processed, producing clean electric power with water as the only by product. A typical, Fuel Cell based power system involve a Electrochemical power converter, gas storage and management systems, thermal management systems and relevant control units. While there exists different types of Fuel cells, Proton Exchange Membrane (PEM) Fuel Cells are considered as the most suitable one for portable applications. Generally, Fuel Cells are considered as the primary power system option in space missions requiring high power ( > 5kW) and long durations and also where water is a consumable, such as manned missions. This is primarily due to the advantage that fuel cell based power systems offer, in terms of specific energy. Fuel cells have the potential to attain specific energy > 500Wh/kg, specific power >500W/kg, energy density > 400Whr/L and also power density > 200 W/L. This apart, a fuel cell system operate totally independent of sun light, whereas as battery based system is fully dependent on the same. This uniqueness provides added flexibility and capabilities to the missions and modularity for power system. High power requiring missions involving reusable launch vehicles, manned missions etc are expected to be richly benefited from this. Another potential application of Fuel Cell would be interplanetary exploration. Unpredictable and dusty atmospheres of heavenly bodies limits sun light significantly and there fuel cells of different types, eg, Bio-Fuel Cells, PEMFC, DMFCs would be able to work effectively. Manned or unmanned lunar out post would require continuous power even during extra long lunar nights and high power levels are expected. Regenerative Fuel Cells, a combination of Fuel Cells and Electrolysers, are identified as strong candidate. While application of Fuel Cells in high power requiring missions is well established, as exemplified in Apollo and Space Shuttles, use in low power missions for science probes/rovers form a relatively newer area. Low power small fuel cells of this class are expected to bring in lot of operational convenience and freedom on onboard / extra terrestrial environment. Technological improvisations in the area, especially with regard to miniaturisation, and extra capabilities that the system offers, make it a strong candidate. The paper outlines features of fuel cells power systems, different types and their potential application scenarios, in the present context. It elucidates the extra capabilities and advantages, due to fuel cells, for different missions. Specific case analyses are also included.

Social cognition and underlying cognitive mechanisms in children with an extra X chromosome: a comparison with autism spectrum disorder.

PubMed

van Rijn, S; Stockmann, L; van Buggenhout, G; van Ravenswaaij-Arts, C; Swaab, H

2014-06-01

Individuals with an extra X chromosome are at increased risk for autism symptoms. This study is the first to assess theory of mind and facial affect labeling in children with an extra X chromosome. Forty-six children with an extra X chromosome (29 boys with Klinefelter syndrome and 17 girls with Trisomy X), 56 children with autism spectrum disorder (ASD) and 88 non-clinical controls, aged 9-18 years, were included. Similar to children with ASD, children with an extra X chromosome showed significant impairments in social cognition. Regression analyses showed that different cognitive functions predicted social cognitive skills in the extra X and ASD groups. The social cognitive deficits were similar for boys and girls with an extra X chromosome, and not specific for a subgroup with high Autism Diagnostic Interview Revised autism scores. Thus, children with an extra X chromosome show social cognitive deficits, which may contribute to social dysfunction, not only in children showing a developmental pattern that is 'typical' for autism but also in those showing mild or late presenting autism symptoms. Our findings may also help explain variance in type of social deficit: children may show similar social difficulties, but these may arise as a consequence of different underlying information processing deficits. © 2014 John Wiley & Sons Ltd and International Behavioural and Neural Genetics Society.

Surface transport processes in charged porous media

DOE PAGES

Gabitto, Jorge; Tsouris, Costas

2017-03-03

Surface transport processes are important in chemistry, colloidal sciences, engineering, biology, and geophysics. Natural or externally produced charges on surfaces create electrical double layers (EDLs) at the solid-liquid interface. The existence of the EDLs produces several complex processes including bulk and surface transport of ions. In this work, a model is presented to simulate bulk and transport processes in homogeneous porous media comprising big pores. It is based on a theory for capacitive charging by ideally polarizable porous electrodes without Faradaic reactions or specific adsorption of ions. A volume averaging technique is used to derive the averaged transport equations inmore » the limit of thin electrical double layers. Description of the EDL between the electrolyte solution and the charged wall is accomplished using the Gouy-Chapman-Stern (GCS) model. The surface transport terms enter into the average equations due to the use of boundary conditions for diffuse interfaces. Two extra surface transports terms appear in the closed average equations. One is a surface diffusion term equivalent to the transport process in non-charged porous media. The second surface transport term is a migration term unique to charged porous media. The effective bulk and transport parameters for isotropic porous media are calculated solving the corresponding closure problems.« less

Surface transport processes in charged porous media

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gabitto, Jorge; Tsouris, Costas

Surface transport processes are important in chemistry, colloidal sciences, engineering, biology, and geophysics. Natural or externally produced charges on surfaces create electrical double layers (EDLs) at the solid-liquid interface. The existence of the EDLs produces several complex processes including bulk and surface transport of ions. In this work, a model is presented to simulate bulk and transport processes in homogeneous porous media comprising big pores. It is based on a theory for capacitive charging by ideally polarizable porous electrodes without Faradaic reactions or specific adsorption of ions. A volume averaging technique is used to derive the averaged transport equations inmore » the limit of thin electrical double layers. Description of the EDL between the electrolyte solution and the charged wall is accomplished using the Gouy-Chapman-Stern (GCS) model. The surface transport terms enter into the average equations due to the use of boundary conditions for diffuse interfaces. Two extra surface transports terms appear in the closed average equations. One is a surface diffusion term equivalent to the transport process in non-charged porous media. The second surface transport term is a migration term unique to charged porous media. The effective bulk and transport parameters for isotropic porous media are calculated solving the corresponding closure problems.« less

Implementing a citizen's DWI reporting program using the Extra Eyes model

DOT National Transportation Integrated Search

2008-09-01

This manual is a guide for law enforcement agencies and community organizations in creating and implementing a citizens DWI reporting program in their communities modeling the Operation Extra Eyes program. Extra Eyes is a program that engages volu...

Multi-objective optimization of discrete time-cost tradeoff problem in project networks using non-dominated sorting genetic algorithm

NASA Astrophysics Data System (ADS)

Shahriari, Mohammadreza

2016-06-01

The time-cost tradeoff problem is one of the most important and applicable problems in project scheduling area. There are many factors that force the mangers to crash the time. This factor could be early utilization, early commissioning and operation, improving the project cash flow, avoiding unfavorable weather conditions, compensating the delays, and so on. Since there is a need to allocate extra resources to short the finishing time of project and the project managers are intended to spend the lowest possible amount of money and achieve the maximum crashing time, as a result, both direct and indirect costs will be influenced in the project, and here, we are facing into the time value of money. It means that when we crash the starting activities in a project, the extra investment will be tied in until the end date of the project; however, when we crash the final activities, the extra investment will be tied in for a much shorter period. This study is presenting a two-objective mathematical model for balancing compressing the project time with activities delay to prepare a suitable tool for decision makers caught in available facilities and due to the time of projects. Also drawing the scheduling problem to real world conditions by considering nonlinear objective function and the time value of money are considered. The presented problem was solved using NSGA-II, and the effect of time compressing reports on the non-dominant set.

The role of extra-foveal processing in 3D imaging

NASA Astrophysics Data System (ADS)

Eckstein, Miguel P.; Lago, Miguel A.; Abbey, Craig K.

2017-03-01

The field of medical image quality has relied on the assumption that metrics of image quality for simple visual detection tasks are a reliable proxy for the more clinically realistic visual search tasks. Rank order of signal detectability across conditions often generalizes from detection to search tasks. Here, we argue that search in 3D images represents a paradigm shift in medical imaging: radiologists typically cannot exhaustively scrutinize all regions of interest with the high acuity fovea requiring detection of signals with extra-foveal areas (visual periphery) of the human retina. We hypothesize that extra-foveal processing can alter the detectability of certain types of signals in medical images with important implications for search in 3D medical images. We compare visual search of two different types of signals in 2D vs. 3D images. We show that a small microcalcification-like signal is more highly detectable than a larger mass-like signal in 2D search, but its detectability largely decreases (relative to the larger signal) in the 3D search task. Utilizing measurements of observer detectability as a function retinal eccentricity and observer eye fixations we can predict the pattern of results in the 2D and 3D search studies. Our findings: 1) suggest that observer performance findings with 2D search might not always generalize to 3D search; 2) motivate the development of a new family of model observers that take into account the inhomogeneous visual processing across the retina (foveated model observers).

Retention and Stability of Implant-Retained Mandibular Overdentures Using Different Types of Resilient Attachments: An In Vitro Study.

PubMed

ELsyad, Moustafa Abdou; Agha, Nora Nory; Habib, Ahmed Ali

2016-01-01

The aim of this study was to evaluate and compare the retention and stability of mandibular implant overdentures using different types of resilient attachments. Two implant analogs were inserted in the canine areas of an acrylic edentulous mandibular model. A metal-reinforced experimental overdenture was constructed and connected to the implant analogs (on two occasions) using either resilient telescopic or Locator attachments. Locators were divided into three subgroups according to the degree of retention of the male nylon insert: Locator extra-light retention (blue insert), Locator light retention (pink insert), and Locator medium retention (transparent insert). Vertical and oblique (anterior, posterior, and lateral) dislodging forces were measured at the beginning of the study (initial retention) and after 540 cycles of denture insertion and removal (final retention). For all dislodging forces, Locator medium recorded the highest initial and final retention. Telescopic attachments recorded the lowest retention during vertical and anterior dislodging, and Locator extra-light recorded the lowest retention during lateral and posterior dislodging. For all types of Locator attachments, anterior dislodging recorded the highest initial and final retention, and lateral dislodging recorded the lowest retention. For the telescopic attachment, posterior dislodgment recorded the highest initial and final retention, and anterior dislodging recorded the lowest retention. After repeated denture insertions and removals, the highest retention and stability were recorded with Locator medium followed by Locator light. The lowest retention was recorded with resilient telescopic attachment, and the lowest stability was recorded with Locator extra-light.

Validated questionnaires heighten detection of difficult asthma comorbidities.

PubMed

Radhakrishna, Naghmeh; Tay, Tunn Ren; Hore-Lacy, Fiona; Stirling, Robert; Hoy, Ryan; Dabscheck, Eli; Hew, Mark

2017-04-01

Multiple extra-pulmonary comorbidities contribute to difficult asthma, but their diagnosis can be challenging and time consuming. Previous data on comorbidity detection have focused on clinical assessment, which may miss certain conditions. We aimed to locate relevant validated screening questionnaires to identify extra-pulmonary comorbidities that contribute to difficult asthma, and evaluate their performance during a difficult asthma evaluation. MEDLINE was searched to identify key extra-pulmonary comorbidities that contribute to difficult asthma. Screening questionnaires were chosen based on ease of use, presence of a cut-off score, and adequate validation to help systematically identify comorbidities. In a consecutive series of 86 patients referred for systematic evaluation of difficult asthma, questionnaires were administered prior to clinical consultation. Six difficult asthma comorbidities and corresponding screening questionnaires were found: sinonasal disease (allergic rhinitis and chronic rhinosinusitis), vocal cord dysfunction, dysfunctional breathing, obstructive sleep apnea, anxiety and depression, and gastro-oesophageal reflux disease. When the questionnaires were added to the referring clinician's impression, the detection of all six comorbidities was significantly enhanced. The average time for questionnaire administration was approximately 40 minutes. The use of validated screening questionnaires heightens detection of comorbidities in difficult asthma. The availability of data from a battery of questionnaires prior to consultation can save time and allow clinicians to systematically assess difficult asthma patients and to focus on areas of particular concern. Such an approach would ensure that all contributing comorbidities have been addressed before significant treatment escalation is considered.

Extra-virgin olive oil phenols block cell cycle progression and modulate chemotherapeutic toxicity in bladder cancer cells

PubMed Central

Coccia, Andrea; Mosca, Luciana; Puca, Rosa; Mangino, Giorgio; Rossi, Alessandro; Lendaro, Eugenio

2016-01-01

Epidemiological data indicate that the daily consumption of extra-virgin olive oil (EVOO), a common dietary habit of the Mediterranean area, lowers the incidence of certain types of cancer, in particular bladder neoplasm. The aim of the present study was to evaluate the antiproliferative activity of polyphenols extracted from EVOO on bladder cancer (BCa), and to clarify the biological mechanisms that trigger cell death. Furthermore, we also evaluated the ability of low doses of extra-virgin olive oil extract (EVOOE) to modulate the in vitro activity of paclitaxel or mitomycin, two antineoplastic drugs used in the management of different types of cancer. Our results showed that EVOOE significantly inhibited the proliferation and clonogenic ability of T24 and 5637 BCa cells in a dose-dependent manner. Furthermore, cell cycle analysis after EVOOE treatment showed a marked growth arrest prior to mitosis in the G2/M phase for both cell lines, with the subsequent induction of apoptosis only in the T24 cells. Notably, simultaneous treatment of mitomycin C and EVOOE reduced the drug cytotoxicity due to inhibition of ROS production. Conversely, the co-treatment of T24 cells with paclitaxel and the polyphenol extract strongly increased the apoptotic cell death at each tested concentration compared to paclitaxel alone. Our results support the epidemiological evidence indicating that olive oil consumption exerts health benefits and may represent a starting point for the development of new anticancer strategies. PMID:27748855

How many surgery appointments should be offered to avoid undesirable numbers of 'extras'?

PubMed

Kendrick, T; Kerry, S

1999-04-01

Patients seen as 'extras' (or 'fit-ins') are usually given less time for their problems than those in pre-booked appointments. Consequently, long queues of 'extras' should be avoided. To determine whether a predictable relationship exists between the number of available appointments at the start of the day and the number of extra patients who must be fitted in. This might be used to help plan a practice appointment system. Numbers of available appointments at the start of the day and numbers of 'extras' seen were recorded prospectively in 1995 and 1997 in one group general practice. Minimum numbers of available appointments at the start of the day, below which undesirably large numbers of extra patients could be predicted, were determined using logistic regression applied to the 1995 data. Predictive values of the minimum numbers calculated for 1995, in terms of predicting undesirable numbers of 'extras', were then determined when applied to the 1997 data. Numbers of extra patients seen correlated negatively with available appointments at the start of the day for all days of the week, with coefficients ranging from -0.66 to -0.80. Minimum numbers of available appointments below which undesirably large numbers of extras could be predicted were 26 for Mondays and four for the other week-days. When applied to 1997 data, these minimum numbers gave positive and negative predictive values of 76% and 82% respectively, similar to their values for 1995, despite increases in patient attendance and changes in the day-to-day pattern of surgery provision between the two years. A predictable relationship exists between the number of available appointments at the start of the day and the number of extras who must be fitted in, which may be used to help plan the appointment system for some years ahead, at least in this relatively stable suburban practice.

The effect of a nano-filled resin coating on the 3-year clinical performance of a conventional high-viscosity glass-ionomer cement.

PubMed

Diem, Vu Thi Kieu; Tyas, Martin J; Ngo, Hien C; Phuong, Lam Hoai; Khanh, Ngo Dong

2014-04-01

The main aim of the study was to compare the clinical performance of the conventional high-powder/liquid ratio glass-ionomer cement (GIC) Fuji IX GP Extra (F IX), Fuji IX GP Extra with a low-viscosity nano-filled resin coating, G-Coat Plus (F IX+GCP), and a resin composite, Solare (S), as a comparison material. Moderate-depth occlusal cavities in the first permanent molars of 91 11-12-year-old children (1-4 restorations per child) were restored with either F IX (87 restorations), F IX+GCP (84 restorations) or S (83 restorations). Direct clinical assessment, photographic assessment and assessment of stone casts of the restorations were carried out at 6 months, 1 year, 2 years and 3 years. The colour match with the tooth of the GIC restorations improved over the 3 years of the study. Marginal staining and marginal adaptation were minimal for all restorations; three restorations exhibited secondary caries at 3 years. From the assessment of the casts, at 2 years, there was significantly less wear of the F IX GP Extra+GCP restorations than the F IX GP Extra restorations (P < 0.005). At 3 years, approximately 37 % of F IX GP Extra restorations showed wear slightly more than the adjacent enamel, compared to 28 % of F IX GP Extra+GCP restorations and 21 % of Solare restorations. Although this was not statistically significant, there was a trend that GCP can protect F IX GP Extra against wear. Although both Fuji IX GP Extra and Fuji IX GP Extra with G-Coat Plus showed acceptable clinical performance in occlusal cavities in children, the application of G-Coat Plus gave some protection against wear. The application of G-Coat Plus to Fuji IX GP Extra glass-ionomer cement may be beneficial in reducing wear in occlusal cavities.

The Effect of Price Competition on Weapon System Acquisition costs

DTIC Science & Technology

1979-09-01

barriers to entry into the weapons production indistry. This practice also reduces the scope of price-compcLtive reprocurement. The implicit tying of R&D... removaL . ’For the serrinal work in this area see H. Leibenstein, "Allocative Efficiency vs. ,h-Efficiency," American Econcmic Review (June 1966). I1 3...If the use of price competition to assign production removes any extra-normal returns earned under sole-source pro- curement policies, firms will no

Circuity factors in ridesharing: the individual's travel decision. Final report, September 1983-April 1986

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fricker, J.D.; Habib, G.

1986-06-01

The extra distance that a member of a carpool travels, when compared with that person's drive-alone distance between home and work, is one of the negative aspects of ridesharing. It is also the key value in calculating the amount of fuel saved by those choosing this commuter mode. The report describes the examination of the CR values experienced by 206 individuals who share rides in or to a small urban area.

Independent Evaluation of The Bay Area Supply Depot Consolidation Prototype

DTIC Science & Technology

1991-12-01

extra inventory to be added to the system. In effect, receipt processing timeliness balances the cost of receiving economically with the cost of holding...that could not be found because of incorrect balance information; the ICP thinks the stock is there, but the warehouse worker cannot locate it. It is a...reflect the overall accuracy of the balance or location 4While balance accuracy is also an important measure of record accuracy, it is not included here

How the Supplement-Not-Supplant Requirement Can Work against the Policy Goals of Title I: A Case for Using Title I, Part A, Education Funds More Effectively and Efficiently. Tightening Up Title I

ERIC Educational Resources Information Center

Junge, Melissa; Krvaric, Sheara

2012-01-01

Title I of the Elementary and Secondary Education Act, a federal program to provide additional assistance to academically struggling students in high-poverty areas, has long contained a provision called the "supplement-not-supplant" requirement. This provision was designed to ensure Title I funds were spent on extra educational services for…

Extra-pulmonary manifestations of paracoccidioidomycosis associated with acquired immunodeficiency syndrome: a case report*

PubMed Central

Safe, Izabella Picinin; do Valle, Fabio Francesconi; Maia, Daniela Cristina Caetano; Agonio, Bárbara; Monte, Rossicléia Lins; Araújo, José de Ribamar; Cordeiro-Santos, Marcelo

2014-01-01

We present a patient with Paracoccidioidomycosis/HIV coinfection which has been investigated because of chronic monoarthritis and mucocutaneous lesions. A biopsy of the synovial membrane and skin revealed structures consistent with Paracoccidioides brasiliensis. At diagnosis, the count of CD4 + T cells was 44 cells/mm3. We emphasize the importance of clinical suspicion of Paracoccidioidomycosis in patients with HIV/AIDS who live in or are from risk areas. PMID:24626662

Two volume integral equations for the inhomogeneous and anisotropic forward problem in electroencephalography

NASA Astrophysics Data System (ADS)

Rahmouni, Lyes; Mitharwal, Rajendra; Andriulli, Francesco P.

2017-11-01

This work presents two new volume integral equations for the Electroencephalography (EEG) forward problem which, differently from the standard integral approaches in the domain, can handle heterogeneities and anisotropies of the head/brain conductivity profiles. The new formulations translate to the quasi-static regime some volume integral equation strategies that have been successfully applied to high frequency electromagnetic scattering problems. This has been obtained by extending, to the volume case, the two classical surface integral formulations used in EEG imaging and by introducing an extra surface equation, in addition to the volume ones, to properly handle boundary conditions. Numerical results corroborate theoretical treatments, showing the competitiveness of our new schemes over existing techniques and qualifying them as a valid alternative to differential equation based methods.

An RBF-based reparameterization method for constrained texture mapping.

PubMed

Yu, Hongchuan; Lee, Tong-Yee; Yeh, I-Cheng; Yang, Xiaosong; Li, Wenxi; Zhang, Jian J

2012-07-01

Texture mapping has long been used in computer graphics to enhance the realism of virtual scenes. However, to match the 3D model feature points with the corresponding pixels in a texture image, surface parameterization must satisfy specific positional constraints. However, despite numerous research efforts, the construction of a mathematically robust, foldover-free parameterization that is subject to positional constraints continues to be a challenge. In the present paper, this foldover problem is addressed by developing radial basis function (RBF)-based reparameterization. Given initial 2D embedding of a 3D surface, the proposed method can reparameterize 2D embedding into a foldover-free 2D mesh, satisfying a set of user-specified constraint points. In addition, this approach is mesh free. Therefore, generating smooth texture mapping results is possible without extra smoothing optimization.

Boulder Capture System Design Options for the Asteroid Robotic Redirect Mission Alternate Approach Trade Study

NASA Technical Reports Server (NTRS)

Belbin, Scott P.; Merrill, Raymond G.

2014-01-01

This paper presents a boulder acquisition and asteroid surface interaction electromechanical concept developed for the Asteroid Robotic Redirect Mission (ARRM) option to capture a free standing boulder on the surface of a 100 m or larger Near Earth Asteroid (NEA). It details the down select process and ranking of potential boulder capture methods, the evolution of a simple yet elegant articulating spaceframe, and ongoing risk reduction and concept refinement efforts. The capture system configuration leverages the spaceframe, heritage manipulators, and a new microspine technology to enable the ARRM boulder capture. While at the NEA it enables attenuation of terminal descent velocity, ascent to escape velocity, boulder collection and restraint. After departure from the NEA it enables, robotic inspection, sample caching, and crew Extra Vehicular Activities (EVA).

Whispering-gallery nanocavity plasmon-enhanced Raman spectroscopy

PubMed Central

Zhang, Jing; Li, Jinxing; Tang, Shiwei; Fang, Yangfu; Wang, Jiao; Huang, Gaoshan; Liu, Ran; Zheng, Lirong; Cui, Xugao; Mei, Yongfeng

2015-01-01

The synergy effect in nature could enable fantastic improvement of functional properties and associated effects. The detection performance of surface-enhanced Raman scattering (SERS) can be highly strengthened under the cooperation with other factors. Here, greatly-enhanced SERS detection is realized based on rolled-up tubular nano-resonators decorated with silver nanoparticles. The synergy effect between whispering-gallery-mode (WGM) and surface plasmon leads to an extra enhancement at the order of 105 compared to non-resonant flat SERS substrates, which can be well tuned by altering the diameter of micron- and nanotubes and the excitation laser wavelengths. Such synchronous and coherent coupling between plasmonics and photonics could lead to new principle and design for various sub-wavelength optical devices, e.g. plasmonic waveguides and hyperbolic metamaterials. PMID:26443526

Effect of co-doping process on topography, optical and electrical properties of ZnO nanostructured

NASA Astrophysics Data System (ADS)

Mohamed, R.; Mamat, M. H.; Malek, M. F.; Ismail, A. S.; Yusoff, M. M.; Syamsir, S. A.; Khusaimi, Z.; Rusop, M.

2018-05-01

We investigated of Undoped ZnO and Magnesium (Mg)-Aluminium (Al) co-doped Zinc Oxide (MAZO) nanostructured films were prepared by sol gel spin coating technique. The surface topography was analyzed using Atomic Force Microscopy (AFM). Based on the AFM results, Root Mean Square (RMS) of MAZO films have rougher surface compared to pure ZnO films. The optical and electrical properties of thin film samples were characterized using Uv-Vis spectroscopy and two point probes, current-voltage (I-V) measurements. The transmittance spectra for both thin samples was above 80% in the visible wavelength. The MAZO film shows the highest conductivity compared to pure ZnO films. This result indicates that the improvement of carrier mobility throughout doping process and possibly contribute by extra ion charge.

Long-term effect on mother-infant behaviour of extra contact during the first hour post partum. III. Follow-up at one year.

PubMed

de Château, P; Wiberg, B

1984-01-01

The present prospective study examined, one year after delivery, the possible effects of early extra contact during the first hour following delivery. An extra skin-to-skin contact and suckling contact was allowed 22 primiparous mothers and their infants (P + group). One control group of 20 primiparous mothers and their infants were given routine care immediately after birth (P group). During observation of a physical examination of the infant, 'extra contact mothers' held and touched their infants more frequently and more often talked positively to their infants than did mothers given routine care. 'Extra contact mothers' had returned to their professional employment outside the home to a lesser extent than had routine care mothers. A greater proportion of 'extra contact' infants slept in a room of their own. In the P+ group, mothers who had returned to gainful employment were also able to have their babies sleep in a room of their own--no such correspondence was found in the P group. The Gesell Developmental Schedules revealed that, in four parts out of five, infants with extra contact immediately after birth, were ahead of those in the control group. On the other hand, the Vineland Social Maturity Scale and the Cesarec Marke Personality Scheme did not reveal any major differences between the two groups. Mothers with early extra skin-to-skin contact and suckling contact breast-fed their infants on an average for 2 1/2 months longer than did routine care mothers. No other differences in feeding habits were found. The influence of extra contact was more pronounced in boy-mother than in girl-mother pairs.

Validity of a traffic air pollutant dispersion model to assess exposure to fine particles.

PubMed

Kostrzewa, Aude; Reungoat, Patrice; Raherison, Chantal

2009-08-01

Fine particles (PM(2.5)) are an important component of air pollution. Epidemiological studies have shown health effects due to ambient air particles, particularly allergies in children. Since the main difficulty is to determine exposure to such pollution, traffic air pollutant (TAP) dispersions models have been developed to improve the estimation of individual exposure levels. One such model, the ExTra index, has been validated for nitrogen oxide concentrations but not for other pollutants. The purpose of this study was to assess the validity of the ExTra index to assess PM(2.5) exposure. We compared PM(2.5) concentrations calculated by the ExTra index to reference measures (passive samplers situated under the covered part of the playground), in 15 schools in Bordeaux, in 2000. First, we collected the input data required by the ExTra index: background and local pollution depending on traffic, meteorology and topography. Second, the ExTra index was calculated for each school. Statistical analysis consisted of a graphic description; then, we calculated an intraclass correlation coefficient. Concentrations calculated with the ExTra index and the reference method were similar. The ExTra index underestimated exposure by 2.2 microg m(-3) on average compared to the reference method. The intraclass correlation coefficient was 0.85 and its 95% confidence interval was [0.62; 0.95]. The results suggest that the ExTra index provides an assessment of PM(2.5) exposure similar to that of the reference method. Although caution is required in interpreting these results owing to the small number of sites, the ExTra index could be a useful epidemiological tool for reconstructing individual exposure, an important challenge in epidemiology.

Probing large extra dimensions with IceCube

DOE Office of Scientific and Technical Information (OSTI.GOV)

Esmaili, Arman; Peres, O.L.G.; Tabrizi, Zahra, E-mail: arman@ipm.ir, E-mail: orlando@ifi.unicamp.br, E-mail: tabrizi.physics@ipm.ir

2014-12-01

In models with Large Extra Dimensions the smallness of neutrino masses can be naturally explained by introducing gauge singlet fermions which propagate in the bulk. The Kaluza-Klein modes of these fermions appear as towers of sterile neutrino states on the brane. We study the phenomenological consequences of this picture for the high energy atmospheric neutrinos. For this purpose we construct a detailed equivalence between a model with large extra dimensions and a (3+n) scenario consisting of three active and n extra sterile neutrino states, which provides a clear intuitive understanding of Kaluza-Klein modes. Finally, we analyze the collected data ofmore » high energy atmospheric neutrinos by IceCube experiment and obtain bounds on the radius of extra dimensions.« less

Perceived organizational support and extra-role performance: which leads to which?

PubMed

Chen, Zhixia; Eisenberger, Robert; Johnson, Kelly M; Sucharski, Ivan L; Aselage, Justin

2009-02-01

L. Rhoades and R. Eisenberger (2002) reported the meta-analytic finding of a highly statistically significant relation between perceived organizational support (POS) and performance but concluded that the reviewed studies' methodology allowed no conclusion concerning the direction of the association. To investigate this issue, the authors assessed POS and extra-role performance 2 times, separated by a 3-year interval, among 199 employees of an electronic and appliance sales organization. Using a cross-lagged panel design, the authors found that POS was positively associated with a temporal change in extra-role performance. In contrast, the relation between extra-role performance and temporal change in POS was not statistically significant. These findings provide evidence that POS leads to extra-role performance.

Hydrophobization of epoxy nanocomposite surface with 1H,1H,2H,2H-perfluorooctyltrichlorosilane for superhydrophobic properties

NASA Astrophysics Data System (ADS)

Psarski, Maciej; Marczak, Jacek; Celichowski, Grzegorz; Sobieraj, Grzegorz B.; Gumowski, Konrad; Zhou, Feng; Liu, Weimin

2012-10-01

Nature inspires the design of synthetic materials with superhydrophobic properties, which can be used for applications ranging from self-cleaning surfaces to microfluidic devices. Their water repellent properties are due to hierarchical (micrometer- and nanometre-scale) surface morphological structures, either made of hydrophobic substances or hydrophobized by appropriate surface treatment. In this work, the efficiency of two surface treatment procedures, with a hydrophobic fluoropolymer, synthesized and deposited from 1H,1H,2H,2H-perfluorooctyltrichlorosilane (PFOTS) is investigated. The procedures involved reactions from the gas and liquid phases of the PFOTS/hexane solutions. The hierarchical structure is created in an epoxy nanocomposite surface, by filling the resin with alumina nanoparticles and micron-sized glass beads and subsequent sandblasting with corundum microparticles. The chemical structure of the deposited fluoropolymer was examined using XPS spectroscopy. The topography of the modified surfaces was characterized using scanning electron microscopy (SEM), and atomic force microscopy (AFM). The hydrophobic properties of the modified surfaces were investigated by water contact and sliding angles measurements. The surfaces exhibited water contact angles of above 150° for both modification procedures, however only the gas phase modification provided the non-sticking behaviour of water droplets (sliding angle of 3°). The discrepancy is attributed to extra surface roughness provided by the latter procedure.

76 FR 48798 - Agency Information Collection Activities: Proposed Collection; Comment Request-Study of the...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-09

... Nutrition Assistance Program Participation Among Medicare's Extra Help Population Pilot Projects AGENCY... Participation Among Medicare's Extra Help Population Pilot Projects. DATES: Written comments must be received on... Efforts to Increase Supplemental Nutrition Assistance Program Participation Among Medicare's Extra Help...

Extra-cardiac findings in cardiovascular magnetic resonance: what the imaging cardiologist needs to know.

PubMed

Rodrigues, Jonathan C L; Lyen, Stephen M; Loughborough, William; Amadu, Antonio Matteo; Baritussio, Anna; Dastidar, Amardeep Ghosh; Manghat, Nathan E; Bucciarelli-Ducci, Chiara

2016-05-09

Cardiovascular magnetic resonance (CMR) is an established non-invasive technique to comprehensively assess cardiovascular structure and function in a variety of acquired and inherited cardiac conditions. A significant amount of the neck, thorax and upper abdomen are imaged at the time of routine clinical CMR, particularly in the initial multi-slice axial and coronal images. The discovery of unsuspected disease at the time of imaging has ethical, financial and medico-legal implications. Extra-cardiac findings at the time of CMR are common, can be important and can change clinical management. Certain patient groups undergoing CMR are at particular risk of important extra-cardiac findings as several of the cardiovascular risk factors for atherosclerosis are also risk factors for malignancy. Furthermore, the presence of certain extra-cardiac findings may contribute to the interpretation of the primary cardiac pathology as some cardiac conditions have multi-systemic extra-cardiac involvement. The aim of this review is to give an overview of the type of extra-cardiac findings that may become apparent on CMR, subdivided by anatomical location. We focus on normal variant anatomy that may mimic disease, common incidental extra-cardiac findings and important imaging signs that help distinguish sinister pathology from benign disease. We also aim to provide a framework to the approach and potential further diagnostic work-up of incidental extra-cardiac findings discovered at the time of CMR. However, it is beyond the scope of this review to discuss and determine the clinical significance of extracardiac findings at CMR.

Linking transformational leadership to nurses' extra-role performance: the mediating role of self-efficacy and work engagement.

PubMed

Salanova, Marisa; Lorente, Laura; Chambel, Maria J; Martínez, Isabel M

2011-10-01

This paper is a report of a social cognitive theory-guided study about the link between supervisors' transformational leadership and staff nurses' extra-role performance as mediated by nurse self-efficacy and work engagement. Past research has acknowledged the positive influence that transformational leaders have on employee (extra-role) performance. However, less is known about the psychological mechanisms that may explain the links between transformational leaders and extra-role performance, which encompasses behaviours that are not considered formal job requirements, but which facilitate the smooth functioning of the organization as a social system. Seventeen supervisors evaluated nurses' extra-role performance, the data generating a sample consisting of 280 dyads. The nurses worked in different health services in a large Portuguese hospital and the participation rate was 76·9% for nurses and 100% for supervisors. Data were collected during 2009. A theory-driven model of the relationships between transformation leadership, self-efficacy, work engagement and nurses' extra-role performance was tested using Structural Equation Modelling. Data analysis revealed a full mediation model in which transformational leadership explained extra-role performance through self-efficacy and work engagement. A direct relationship between transformational leadership and work engagement was also found. Nurses' supervisors with a transformational leadership style enhance different 'extra-role' performance in nurses and this increases hospital efficacy. They do so by establishing a sense of self-efficacy but also by amplifying their levels of engagement in the workplace. © 2011 Blackwell Publishing Ltd.

EXTRA-EMBRYONIC-SPECIFIC IMPRINTED EXPRESSION IS RESTRICTED TO DEFINED LINEAGES IN THE POST-IMPLANTATION EMBRYO

PubMed Central

Hudson, Quanah J.; Seidl, Christine I.M.; Kulinski, Tomasz M.; Huang, Ru; Warczok, Katarzyna E.; Bittner, Romana; Bartolomei, Marisa S.; Barlow, Denise P.

2011-01-01

A subset of imprinted genes in the mouse have been reported to show imprinted expression that is restricted to the placenta, a short-lived extra-embryonic organ. Notably these so-called 'placental-specific' imprinted genes are expressed from both parental alleles in embryo and adult tissues. The placenta is an embryonic-derived organ that is closely associated with maternal tissue and as a consequence, maternal contamination can be mistaken for maternal-specific imprinted expression. The complexity of the placenta, which arises from multiple embryonic lineages, poses additional problems in accurately assessing allele-specific repressive epigenetic modifications in genes that also show lineage-specific silencing in this organ. These problems require that extra evidence be obtained to support the imprinted status of genes whose imprinted expression is restricted to the placenta. We show here that the extra-embryonic visceral yolk sac (VYS), a nutritive membrane surrounding the developing embryo, shows a similar 'extra-embryonic-lineage-specific' pattern of imprinted expression. We present an improved enzymatic technique for separating the bilaminar VYS and show that this pattern of imprinted expression is restricted to the endoderm layer. Finally, we show that VYS 'extra-embryonic-lineage-specific' imprinted expression is regulated by DNA methylation in a similar manner as shown for genes showing multi-lineage imprinted expression in extra-embryonic, embryonic and adult tissues. These results show that the VYS is an improved model for studying the epigenetic mechanisms regulating extra-embryonic-lineage-specific imprinted expression. PMID:21354127

7 CFR 457.105 - Extra long staple cotton crop insurance provisions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Extra long staple cotton crop insurance provisions... long staple cotton crop insurance provisions. The extra long staple cotton crop insurance provisions... Crop Insurance Corporation ELS Cotton Crop Provisions 1. Definitions Cotton. Varieties identified as...

7 CFR 457.105 - Extra long staple cotton crop insurance provisions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Extra long staple cotton crop insurance provisions... long staple cotton crop insurance provisions. The extra long staple cotton crop insurance provisions... Crop Insurance Corporation ELS Cotton Crop Provisions 1. Definitions Cotton. Varieties identified as...

7 CFR 457.105 - Extra long staple cotton crop insurance provisions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Extra long staple cotton crop insurance provisions... long staple cotton crop insurance provisions. The extra long staple cotton crop insurance provisions... Crop Insurance Corporation ELS Cotton Crop Provisions 1. Definitions Cotton. Varieties identified as...

An EMG Interface for the Control of Motion and Compliance of a Supernumerary Robotic Finger

PubMed Central

Hussain, Irfan; Spagnoletti, Giovanni; Salvietti, Gionata; Prattichizzo, Domenico

2016-01-01

In this paper, we propose a novel electromyographic (EMG) control interface to control motion and joints compliance of a supernumerary robotic finger. The supernumerary robotic fingers are a recently introduced class of wearable robotics that provides users additional robotic limbs in order to compensate or augment the existing abilities of natural limbs without substituting them. Since supernumerary robotic fingers are supposed to closely interact and perform actions in synergy with the human limbs, the control principles of extra finger should have similar behavior as human’s ones including the ability of regulating the compliance. So that, it is important to propose a control interface and to consider the actuators and sensing capabilities of the robotic extra finger compatible to implement stiffness regulation control techniques. We propose EMG interface and a control approach to regulate the compliance of the device through servo actuators. In particular, we use a commercial EMG armband for gesture recognition to be associated with the motion control of the robotic device and surface one channel EMG electrodes interface to regulate the compliance of the robotic device. We also present an updated version of a robotic extra finger where the adduction/abduction motion is realized through ball bearing and spur gears mechanism. We have validated the proposed interface with two sets of experiments related to compensation and augmentation. In the first set of experiments, different bimanual tasks have been performed with the help of the robotic device and simulating a paretic hand since this novel wearable system can be used to compensate the missing grasping abilities in chronic stroke patients. In the second set, the robotic extra finger is used to enlarge the workspace and manipulation capability of healthy hands. In both sets, the same EMG control interface has been used. The obtained results demonstrate that the proposed control interface is intuitive and can successfully be used, not only to control the motion of a supernumerary robotic finger but also to regulate its compliance. The proposed approach can be exploited also for the control of different wearable devices that has to actively cooperate with the human limbs. PMID:27891088

Measurement of the cosmic ray e+ +e- spectrum from 20 GeV to 1 TeV with the Fermi Large Area Telescope.

PubMed

Abdo, A A; Ackermann, M; Ajello, M; Atwood, W B; Axelsson, M; Baldini, L; Ballet, J; Barbiellini, G; Bastieri, D; Battelino, M; Baughman, B M; Bechtol, K; Bellazzini, R; Berenji, B; Blandford, R D; Bloom, E D; Bogaert, G; Bonamente, E; Borgland, A W; Bregeon, J; Brez, A; Brigida, M; Bruel, P; Burnett, T H; Caliandro, G A; Cameron, R A; Caraveo, P A; Carlson, P; Casandjian, J M; Cecchi, C; Charles, E; Chekhtman, A; Cheung, C C; Chiang, J; Ciprini, S; Claus, R; Cohen-Tanugi, J; Cominsky, L R; Conrad, J; Cutini, S; Dermer, C D; de Angelis, A; de Palma, F; Digel, S W; Di Bernardo, G; do Couto E Silva, E; Drell, P S; Dubois, R; Dumora, D; Edmonds, Y; Farnier, C; Favuzzi, C; Focke, W B; Frailis, M; Fukazawa, Y; Funk, S; Fusco, P; Gaggero, D; Gargano, F; Gasparrini, D; Gehrels, N; Germani, S; Giebels, B; Giglietto, N; Giordano, F; Glanzman, T; Godfrey, G; Grasso, D; Grenier, I A; Grondin, M-H; Grove, J E; Guillemot, L; Guiriec, S; Hanabata, Y; Harding, A K; Hartman, R C; Hayashida, M; Hays, E; Hughes, R E; Jóhannesson, G; Johnson, A S; Johnson, R P; Johnson, W N; Kamae, T; Katagiri, H; Kataoka, J; Kawai, N; Kerr, M; Knödlseder, J; Kocevski, D; Kuehn, F; Kuss, M; Lande, J; Latronico, L; Lemoine-Goumard, M; Longo, F; Loparco, F; Lott, B; Lovellette, M N; Lubrano, P; Madejski, G M; Makeev, A; Massai, M M; Mazziotta, M N; McConville, W; McEnery, J E; Meurer, C; Michelson, P F; Mitthumsiri, W; Mizuno, T; Moiseev, A A; Monte, C; Monzani, M E; Moretti, E; Morselli, A; Moskalenko, I V; Murgia, S; Nolan, P L; Norris, J P; Nuss, E; Ohsugi, T; Omodei, N; Orlando, E; Ormes, J F; Ozaki, M; Paneque, D; Panetta, J H; Parent, D; Pelassa, V; Pepe, M; Pesce-Rollins, M; Piron, F; Pohl, M; Porter, T A; Profumo, S; Rainò, S; Rando, R; Razzano, M; Reimer, A; Reimer, O; Reposeur, T; Ritz, S; Rochester, L S; Rodriguez, A Y; Romani, R W; Roth, M; Ryde, F; Sadrozinski, H F-W; Sanchez, D; Sander, A; Saz Parkinson, P M; Scargle, J D; Schalk, T L; Sellerholm, A; Sgrò, C; Smith, D A; Smith, P D; Spandre, G; Spinelli, P; Starck, J-L; Stephens, T E; Strickman, M S; Strong, A W; Suson, D J; Tajima, H; Takahashi, H; Takahashi, T; Tanaka, T; Thayer, J B; Thayer, J G; Thompson, D J; Tibaldo, L; Tibolla, O; Torres, D F; Tosti, G; Tramacere, A; Uchiyama, Y; Usher, T L; Van Etten, A; Vasileiou, V; Vilchez, N; Vitale, V; Waite, A P; Wallace, E; Wang, P; Winer, B L; Wood, K S; Ylinen, T; Ziegler, M

2009-05-08

Designed as a high-sensitivity gamma-ray observatory, the Fermi Large Area Telescope is also an electron detector with a large acceptance exceeding 2 m;{2} sr at 300 GeV. Building on the gamma-ray analysis, we have developed an efficient electron detection strategy which provides sufficient background rejection for measurement of the steeply falling electron spectrum up to 1 TeV. Our high precision data show that the electron spectrum falls with energy as E-3.0 and does not exhibit prominent spectral features. Interpretations in terms of a conventional diffusive model as well as a potential local extra component are briefly discussed.

Facile fabrication of superhydrophobic films with fractal structures using epoxy resin microspheres

NASA Astrophysics Data System (ADS)

Quan, Yun-Yun; Zhang, Li-Zhi

2014-02-01

A simple method has been developed to fabricate superhydrophobic surfaces with fractal structures with epoxy resin microspheres (ERMs). The ERMs is produced by phase separation in an epoxy-amine curing system with a silica sol (SS) dispersant. The transparent epoxy solution becomes cloudy and turns into epoxy suspension (ES) in this process. The fractal structure (two tier structure) generated by synthetic epoxy resin microspheres (ERMs) and deposited nanoincrutations on the surfaces of these ERMs, which have been observed by scanning electron microscope (SEM). The curing time of ES is an important condition to obtain films with good comprehensive performances. Superhydrophobic films can be prepared by adding extra SS into ES with a curing time longer than 5 h. The optimal curing time is 10 h to fabricate a film with good mechanical stability and high superhydrophobicity. In addition, a surface with anti-wetting property of impacting microdroplets can be fabricated by prolonging the curing time of ES to 24 h. The gradually decreased hydrophilic groups resulted from a longer curing time enable the surface to have smaller surface adhesions to water droplets, which is the main reason to keep its superhydrophobicity under impacting conditions. The coated surface is highly hydrophobic and the impacting water droplets are bounced off from the surface.